Science.gov

Sample records for 15fig 16fig 17fig

  1. Presidential Address: The Woman in the Case Jane Todd Crawford, 1763-1842

    PubMed Central

    Sparkman, Robert S.

    1979-01-01

    The 1978 Presidential Address of the Southern Surgical Association is dedicated to the wives of the members, past and present, in acknowledgment and appreciation of the enduring contribution that they have made to the quality and character of this association. ImagesFig. 1.Fig. 3.Fig. 4.Fig. 5.Fig. 7.Fig. 8.Fig. 9.Fig. 10.Fig. 11.Fig. 12.Fig. 13.Fig. 14.Fig. 15.Fig. 16.Fig. 17.Fig. 18.Fig. 19.Fig. 20. PMID:375854

  2. The respiratory epithelium of the lung in the green turtle (Chelonia mydas L.).

    PubMed Central

    Solomon, S E; Purton, M

    1984-01-01

    The chelonian lung exhibits reptilian, mammalian and avian features. The respiratory epithelium is typically vertebrate, i.e. pseudostratified columnar with cilia; gaseous exchange areas appear at all levels from the respiratory bronchi down to the alveoli. The latter are invested with a capillary network and both type I and type II cells are present. The possible functional significance of the distribution of collagen, elastic tissue, cartilage and smooth muscle is discussed. Images Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:6490523

  3. A Mini-Atlas of Ear-drum Pathology

    PubMed Central

    Hawke, Michael; Kwok, Peter

    1987-01-01

    The authors provide a number of ear-drum pictures and identify and discuss diseases affecting the external ear canal, the tympanic membrane and middle ear. They also deal with the removal of foreign bodies from the external canal, perforation of the tympanic membrane, and the use of an artificial ventilation tube. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18 PMID:21263886

  4. Intermediate hosts of Schistosoma

    PubMed Central

    Mandahl-Barth, G.

    1957-01-01

    This study is an attempt to classify all described species of African Bulinus. It is based upon the author's examination of a great number of specimens collected from many parts of Africa. The variations attributable to age, environment and genetic factors which may be noted in the taxonomic characters are discussed, and some new species and subspecies are established. For each recognized species and subspecies the author states the distinguishing characters, indicates the geographical distribution, and gives a list of synonyms. ImagesFig. 1Fig. 2Fig. 2(concluded)Fig. 3Fig. 4Fig. 5Fig. 5(continued)Fig. 5(concluded)Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 16(concluded)Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 22(concluded)Fig. 23 PMID:13479773

  5. Ultrastructure of Ebola virus particles in human liver.

    PubMed Central

    Ellis, D S; Simpson, I H; Francis, D P; Knobloch, J; Bowen, E T; Lolik, P; Deng, I M

    1978-01-01

    Electron microscopy of tissues from two necropsies carried out in the Sudan on patients with Ebola virus infection identified virus particles in lung and spleen, but the main concentrations of Ebola particles were seen in liver sections. Viral precursor proteins and cores were found in functional liver cells, often aligned in membrane-bound aggregations. Complete virions, usually found only extracellularly, were mainly seen as long tubular forms, some without cores. Many tubular forms had 'enlarged heads' or 'spores' and some branched and torus forms were identified. The size and structure of the Ebola virus forms appear to be virtually indistinguishable from those of Marburg virus. Images Figs 6, 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 PMID:641193

  6. The innervation of the adrenal gland. IV. Innervation of the rat adrenal medulla from birth to old age. A descriptive and quantitative morphometric and biochemical study of the innervation of chromaffin cells and adrenal medullary neurons in Wistar rats.

    PubMed Central

    Tomlinson, A; Coupland, R E

    1990-01-01

    The innervation of the adrenal medulla has been investigated in normal Wistar rats from birth to old age and ultrastructural findings compared with biochemical markers of the cholinergic innervation of the adrenal gland and catecholamine storage. Morphological evidence of the immaturity of the innervation during the first postnatal week is provided and using quantitative morphometry the innervation of chromaffin cells is shown to reach a mean total of 5.4 synapses per chromaffin cell during the period 26 days to 12 weeks of age. The variation in contents of synaptic profiles is discussed in the light of recent work that demonstrates a major sensory as well as visceral efferent innervation of the gland. Adrenal medullary neurons usually occur in closely packed groups, intimately associated with Schwann cells. Axodendritic and axosomatic synapses on these neurons are described and the likely origin of axonal processes innervating the neurons discussed. In old age the density of innervation remains the same as in young adult animals even though the medulla shows evidence of hyperplasia and hypertrophy of individual chromaffin cells. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 PMID:2384334

  7. Meckel's cartilage in Xenopus laevis during metamorphosis: a light and electron microscope study.

    PubMed Central

    Thomson, D A

    1986-01-01

    Meckel's cartilage, in Xenopus laevis prior to metamorphosis, is a tissue exhibiting very large lacunae, separated by thin rims of matrix, presenting a net-like appearance, similar to that of cartilage in invertebrates. The cells on the periphery of the tissue are rather more flattened, and more closely packed. On the lateral aspects of the cartilage distinct columns of apparently dividing cells are evident. During metamorphic climax, the amount of matrix separating the lacunae increases, with an associated decrease in lacunar size, and some of the deeper cells develop cilia, which are not seen either before or after climax. By the end of metamorphic climax there is a considerable increase in the amount of matrix present in the tissue, while many cells at all depths in the cartilage show the presence of lysosome-like structures, possibly associated with the changing shape of the cartilage. Intramembranous ossification is proceeding around Meckel's cartilage, but there is no evidence of endochondral ossification up to the end of metamorphosis. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:3693112

  8. Tumours of bones and joints

    PubMed Central

    Misdorp, W.; Van Der Heul, R. O.

    1976-01-01

    Tumours of bones and joints are not infrequent in dogs but are rare in other domestic animals. In the dog, most bone tumours are malignant; osteosarcomas are by far the most frequently encountered tumours, especially in giant breeds and boxers. The following main categories of bone tumour are described: bone-forming, cartilage-forming, giant cell, marrow, vascular, miscellaneous, metastatic, unclassified, and tumour-like lesions. The tumours of joints and related structures are classified as synovial sarcomas, fibroxanthomas, and malignant giant cell tumour of soft tissues. ImagesFig. 21Fig. 22Fig. 23Fig. 24Fig. 17Fig. 18Fig. 19Fig. 20Fig. 29Fig. 30Fig. 31Fig. 32Fig. 33Fig. 34Fig. 35Fig. 36Fig. 25Fig. 26Fig. 27Fig. 28Fig. 1Fig. 2Fig. 3Fig. 4Fig. 37Fig. 38Fig. 39Fig. 40Fig. 5Fig. 6Fig. 7Fig. 8Fig. 13Fig. 14Fig. 15Fig. 16Fig. 9Fig. 10Fig. 11Fig. 12 PMID:1086157

  9. Tumours of the upper alimentary tract

    PubMed Central

    Head, K. W.

    1976-01-01

    Tumours of the oropharynx of domestic animals are common in most parts of the world, but squamous cell carcinoma of the upper alimentary tract shows differences in prevalence in different geographical areas and occurs at different sites in the various species. Oral tumours of the melanogenic system are more common in dogs than in man. The following main histological categories, which broadly correspond to those used in the classification of tumours of man, are described: papilloma; squamous cell carcinoma; salivary gland tumours; malignant melanoma; tumours of soft (mesenchymal) tissues; tumours of the facial bones; tumours of haematopoietic and related tissues; and odontogenic tumours and jaw cysts. Papilloma, squamous cell carcinoma, malignant melanoma, fibroma, and fibrosarcoma account for about 80% of the tumours that occur in the upper alimentary tract of domestic animals. ImagesFig. 6Fig. 7Fig. 8Fig. 9Fig. 34Fig. 35Fig. 36Fig. 37Fig. 2Fig. 3Fig. 4Fig. 5Fig. 22Fig. 23Fig. 24Fig. 25Fig. 26Fig. 27Fig. 28Fig. 29Fig. 14Fig. 15Fig. 16Fig. 17Fig. 30Fig. 31Fig. 32Fig. 33Fig. 18Fig. 19Fig. 20Fig. 21Fig. 10Fig. 11Fig. 12Fig. 13Fig. 1 PMID:1086147

  10. Variability of dermal elastin visualized ultrastructurally with iron hematoxylin.

    PubMed Central

    Spicer, S. S.; Brissie, R. M.; Thompson, N. T.

    1975-01-01

    The Verhoeff iron hematoxylin-lead citrate (VIH-LC) method demonstrated vertical elastic fibers that were often composed only of microfibrillar component extending into the epidermal basement membrane in human skin. These fibers connected with a network of trabeculae composed of microfibrils and elastin fibrils in varying proportions. The large elastic fibers in the deep two thirds of the dermis consited mainly of compact bundles of small elstin fibrils in infants and of solid elastin cores with a fimbriated periphery in adults; Dermis of a 6-month-old fetus contained very few small elastic fibrils except around blood vessels. Skin of an elderly subject revealed exteme proliferation of unusual reticulated elastic fibers in various areas and disclosed abnormal nodules of elastin or collagen fibrils in finely particulate matter. Small elastin fibrils, abundant microfibrils, and intermixed individual collagen fibrils comprised an adventitial collar between sweat glands and fibroblasts. Elastin fibrils were absent from this collar in the fetus and increased with the subject's age. A permanganate-high iron diamine sequence appeared to impart density to the microfibrillar component of elastic fibers. Images Figs 6-7 Fig 8 Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 Fig 14 Fig 15 Fig 16 Fig 17 Fig 18 Fig 19 Fig 20 Fig 21 Fig 22 Fig 23 Fig 24 Fig 25 Fig 26 Fig 27 Fig 1 Fig 2 Figs 3-5 Fig 28 Fig 29 Fig 30 Fig 31 Fig 32 Fig 33 PMID:49149

  11. Electron Microscopy of the Cell

    PubMed Central

    Leeson, T. S.

    1965-01-01

    The use of the electron microscope has added much to our knowledge of the cell. The fine structure of the component parts of the nucleus and the cytoplasm is described, and their functions are indicated. The nature and structural modifications of the plasma membrane are illustrated with particular reference to function. To illustrate the interrelationships of the nucleus and cytoplasm, the theory of protein secretion is discussed, the secretion of a particular protein or polypeptide being determined by a particular nucleotide sequence in the desoxyribonucleic acid of a chromosome, that is, by a gene. This information is transferred from nucleus to cytoplasm. It is in the cytoplasm that the majority of the work is performed while the nucleus directs the work of the cell. ImagesFig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 23Fig. 24Fig. 25Fig. 26 PMID:5829410

  12. Ultrastructural features of degenerated cardiac muscle cells in patients with cardiac hypertrophy.

    PubMed Central

    Maron, B. J.; Ferrans, V. J.; Roberts, W. C.

    1975-01-01

    Degenerated cardiac muscle cells were present in hypertrophied ventricular muscle obtained at operation from 12 (38%) of 32 patients with asymmetric septal hypertrophy (hypertrophic cardiomyopathy) or aortic valvular disease. Degenerated cells demonstrated a wide variety of ultrastructural alterations. Mildly altered cells were normal-sized or hypertrophied and showed focal changes, including preferential loss of thick (myosin) filaments, streaming and clumping of Z band material, and proliferation of the tubules of sarcoplasmic reticulum. Moderately and severely degenerated cells were normal-sized or atrophic and showed additional changes, including extensive myofibrillar lysis and loss of T tubules. The appearance of the most severely degenerated cells usually reflected the cytoplasmic organelle (sarcoplasmic reticulum, glycogen, or mitochondria) which underwent proliferation and filled the myofibril-free areas of these cells. Moderately and severely degenerated cells were present in areas of fibrosis, had thickened basement membranes, and had lost their intercellular connections. These observations suggest that degenerated cardiac muscle cells have poor contractile function and may be responsible for impaired cardiac performance in some patients with chronic ventricular hypertrophy. Images Fig 1 Fig 2 Fig 3 Figs 4-6 Figs 7-8 Fig 9 Fig 10 Fig 11 Figs 12-15 Fig 16 Fig 17 Figs 18-21 Figs 22-23 Fig 24 Fig 25 Fig 26 Fig 27 Figs 28-29 Fig 30 Figs 31-32 Fig 33 PMID:124533

  13. An analysis of implantation in Indian hipposiderid bats.

    PubMed Central

    Bhiwgade, D A

    1979-01-01

    The meagre information on the early developmental stages and the evolutionary and taxonomic position of hipposiderid bats has stimulated the present study. The cranial segment of the uterus forms a balloon-like enlargement at the time of implantation, and the antimesometrial part of its huminal slit expands into a spacious implantation chamber. Implantation is superficial and circumferential and the embryonic disc is orientated towards the side of the uterus which lies between the lateral and the antimesometrial sides. Reichert's membrane develops early, and the formation of a symplasma is described. A comparative account of implantation in the four species of hipposiderid bats of the family Hipposideridae is given, and the taxonomic position of this family is discussed on the basis of the present observations and earlier work on the embryology of Chiroptera. Images Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 PMID:438094

  14. Placental agenesis, embryonal hydraemia, embryolethality and acute hypervitaminosis A in rats.

    PubMed Central

    Love, A. M.; Vickers, T. H.

    1976-01-01

    Acute maternal hypervitaminosis A established on Day 9 of gestation in Sprague-Dawley-derived rats caused a dose-related increase in the resorption of implants. The median embryolethal dose was 189,000 i.u./kg. In addition to suppression of the allantois leading to placental agenesis, damaged embryos showed retarded somatic development and hydraemia, all apparent 24 h after treatment. At about Day 11 the hydraemia involved the visceral wall of the yolk sac causing death of the embryo soon after. The fluid in the vitelline vessels continued to collect until Day 13 when it absorbed following necrosis of the wall of the yolk sac. Two mechanisms are suggested for the embryonal hydraemia: either the excess fluid resulted from a permeability disorder induced by the vitamin A; or it was retained metabolic water or water specifically absorbed to inflate the allantois and, being unused for this purpose, it pooled in the blood vessels of the embryo. The yolk sac hydraemia is more likely to have followed injury to the proximal endoderm. Images Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 PMID:999789

  15. Early Development of and Pathology Associated with Strongylus edentatus

    PubMed Central

    McCraw, B. M.; Slocombe, J. O. D.

    1974-01-01

    Pony foals inoculated with infective Strongylus edentatus larvae were monitored for clinical signs and selected blood changes and were examined at necropsy from two to 56 days postinfection. Larvae penetrated the intestine and reached the liver intravenously before 40 hours postinfection. Occasional thrombi and larval tracks associated with the intima of cecal and colic veins suggested aberrant paths. Larvae in the liver doubled in width between seven and 15 days postinfection and a sudden increment in circulating eosinophils occurred between 11 and 15 days. These changes were probably associated with the third molt. At 30 days fourth stage larvae were migrating in the liver; at 42 days they were present in the hepatorenal ligament. White foci were observed in the liver from two to 56 days. They contained mononuclear cells and eosinophils and later necrotic cores of eosinophils. By one month foci were overshadowed by tortuous tracks of migrating larvae. Aberrant larvae in the lungs were confined in granulomas. Massive granulomas in the wall of the cecum and colon contained small larvae which were probably inhibited by antibody associated with the third molt. Severe disruption of omental architecture and adhesions involving the intestine occurred several weeks after infection. ImagesFig. 1.Fig. 2.Fig. 3.Fig. 4.Fig. 5.Fig. 6.Fig. 7.Fig. 8.Fig. 9.Fig. 10.Fig. 11.Fig. 12.Fig. 13.Fig. 14.Fig. 15.Fig. 16.Fig. 17.Fig. 18.Fig. 19.Fig. 20.Fig. 21.Fig. 22.Fig. 23.Fig. 24. PMID:4274818

  16. Laboratory Design for Microbiological Safety

    PubMed Central

    Phillips, G. Briggs; Runkle, Robert S.

    1967-01-01

    Of the large amount of funds spent each year in this country on construction and remodeling of biomedical research facilities, a significant portion is directed to laboratories handling infectious microorganisms. This paper is intended for the scientific administrators, architects, and engineers concerned with the design of new microbiological facilities. It develops and explains the concept of primary and secondary barriers for the containment of microorganisms. The basic objectives of a microbiological research laboratory, (i) protection of the experimenter and staff, (ii) protection of the surrounding community, and (iii) maintenance of experimental validity, are defined. In the design of a new infectious-disease research laboratory, early identification should be made of the five functional zones of the facility and their relation to each other. The following five zones and design criteria applicable to each are discussed: clean and transition, research area, animal holding and research area, laboratory support, engineering support. The magnitude of equipment and design criteria which are necessary to integrate these five zones into an efficient and safe facility are delineated. Images Fig. 1 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:4961771

  17. Ultrastructural Changes in Chick Cerebellum Induced by Polyinosinic Polycytidylic Acid

    PubMed Central

    Yu, Mang C.; Young, Paul A.; Yu, Wan-Hua Amy

    1971-01-01

    The ultrastructural changes in cerebellar encephalopathy induced by intravenous injection of poly I:C in young chickens were studied. The neuroglia and the small blood vessels showed the most severe injury. In the astroglia, initial alterations consisted of a mild cytoplasmic swelling whereas terminally, evagination of the outer nuclear membrane, formation of large vacuoles, and mitochondrial swelling occurred. In the cortex, oligodendroglial alterations consisted of dilatation of the nuclear membranes and of the endoplasmic reticulum, whereas in the white matter, the interfascicular oligodendroglia exhibited clumping and coagulation of the chromatin material. Some small blood vessels appeared normal, while others showed massive erosion of the endothelium resulting in aneurysm-like ballooning of the vascular wall. The granule cells displayed marked edema. The myelin of nerve fibers showed an accumulation of fluid initially, with splitting occurring in the terminal stages. These studies indicated a severe cytotoxic effect of poly I:C on the cerebella of young chickens. ImagesFig 16Fig 17Fig 13Fig 14Fig 15Fig 5Fig 6Fig 7Fig 8Fig 9Fig 10Fig 11Fig 12Fig 1Fig 2Fig 3Fig 4 PMID:5142269

  18. Encrustation and Atherosclerosis: The Analogy Between Early in Vivo Lesions and Deposits Which Occur in Extracorporeal Circulations

    PubMed Central

    Murphy, E. A.; Rowsell, H. C.; Downie, H. G.; Robinson, G. A.; Mustard, J. F.

    1962-01-01

    A study was made of the relation between the pattern and topography of thrombus formation in models of various vessel configurations coupled into extracorporeal shunts in swine and the development of atherosclerosis at corresponding sites on swine aortas. The pattern and distribution of deposits formed in the models were strikingly similar to the pattern and distribution of incipient atherosclerosis at comparable sites in the vascular tree. The earliest and only consistent component of the flow chamber deposits was the blood platelet. The platelet deposits would frequently stain with oil red O. The cholesterol level of washed human platelets was found to show a good correlation with that in the plasma. This evidence suggests that deposition of particulate matter (chiefly platelets), largely determined by the hydraulic factors, may be an important factor in the early, as well as later, stages of atherosclerosis. ImagesFigs. 10a and bFig. 13Fig. 21Fig. 1Fig. 3Figs. 4a and bFig. 5Fig. 6aFig. 6bFig. 7Fig. 8Fig. 9Fig. 11Fig. 12Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20 PMID:14477412

  19. Histopathology of N-methyl-N-nitrosourea-induced mesenchymal tumours of the rat urinary bladder.

    PubMed Central

    Kunze, E.; Ruschitzka, F.; Schwalbe, K.

    1990-01-01

    The present study reports the induction, histopathology, immunocytochemistry, growth pattern and proliferative behaviour of mesenchymal tumours of the urinary bladder of rats induced by a single intravesical dose (5 mg/kg/body weight) of N-methyl-N-nitrosourea (MNU). In 14 of 283 female Wistar rats (incidence: 4.9%). 16 non-epithelial tumours had developed after an experimental period of 14 months. The most common histological type induced was of fibrohistiocytic origin (eight benign-appearing and three malignant fibrous histiocytomas). Furthermore, two pure histiocytomas (one benign and one malignant) and three capillary and cavernous haemangiomas were produced. Since no metastases occurred and no clear-cut distinction between a merely expansive and a truly invasive growth was possible, the diagnosis of malignancy was based on the degree of cellular atypia and the mitotic activity. The benign-appearing fibrous histiocytomas showed a mean mitotic index of 0.06% and the malignant fibrous histiocytomas of 0.34%. The mitotic activity of the malignant histiocytoma was threefold (0.78%) as high as in the benign-appearing histiocytoma (0.25%). There exist close morphological similarities between the induced mesenchymal tumours in the rat and those occurring in the human bladder. Although the spectrum of histological types of mesenchymal tumours seen in the rat bladder was narrower than that encountered in man, MNU seems suitable for further studying the histogenesis, histopathology and biology of experimentally induced non-epithelial bladder neoplasms to gain information for a better understanding of the pathogenesis of human disease. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:2164825

  20. Haemopoietic phagocytes in the early differentiating avian retina.

    PubMed Central

    Cuadros, M A; García-Martín, M; Martin, C; Ríos, A

    1991-01-01

    The existence of specialised phagocytic cells is described in regions of the retinal neuroepithelium undergoing intense cell death during early differentiation of the avian embryo retina (2.5-5 days of incubation). These results were obtained using routine techniques for light microscopy, acid phosphatase histochemistry and immunocytochemical staining with antibodies MB-1 and QH-1, both specific for quail endothelial cells and all blood cells except mature erythrocytes. Specialised phagocytes were distinguishable from neuroepithelial cells on the basis of morphological criteria: in the former, the nucleus was not oval in shape and was not oriented perpendicular to basement membrane neuroepithelium. The cytoplasm of the specialised phagocytes was often filled with dead cell fragments. In contrast to neuroepithelial cells, the specialised phagocytes showed acid phosphatase activity and were labelled with both MB-1 and QH-1 antibodies in normal quail embryos and chick----quail yolk sac chimeras. Moreover, some acid phosphatase positive and MB-1/QH-1 positive cells also appeared in the presumptive vitreous body, at the edges of the optic cup and in the surrounding mesenchyme. As the vitreal cells and the specialised phagocytes of the neural retina were immunolabelled in chick----quail yolk sac chimeras, we conclude that they are derived from haemopoietic cells in the yolk sac. Some images suggest that these cells enter the vitreous body from the surrounding mesenchyme and traverse the basement membrane of the neuroepithelium in the optic disc region to give rise to the specialised phagocytes of the retinal neuroepithelium. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 PMID:1769889

  1. Animal models of primary myocardial diseases.

    PubMed Central

    Liu, S. K.; Tilley, L. P.

    1980-01-01

    Feline and canine cardiomyopathies (primary myocardial diseases) were reviewed and divided into three groups based on the clinical, hemodynamic, angiocardiographic, and pathologic findings: (1) feline and canine hypertrophic cardiomyopathy, (2) feline and canine congestive (dilated) cardiomyopathy, and (3) feline restrictive cardiomyopathy. All three groups consisted predominantly of mature adult male cats and dogs. Cardiomyopathy in the hamster and turkey was also reviewed. The most common presenting signs were dyspnea and/or thromboembolism in the cat, systolic murmurs with gallop rhythms on auscultation, cardiomegaly with (groups 1 and 3) or without (group 2) pulmonary edema, abnormal electrocardiograms, elevated left ventricular end-diastolic pressures, and angiocardiographic evidence of mitral regurgitation with left ventricular concentric hypertrophy (group 1), left ventricular dilatation (group 2), or midventricular stenosis (group 3). Some cats in groups 1 and 3 also had evidence of left ventricular outflow obstruction. The principal pathologic findings in all of the cats and dogs were left atrial dilation, hypertrophy, increased septal:left ventricular free wall thickness ratio with disorganization of cardiac muscle cells (group 1); dilatation of the four chambers with degeneration of cardiac muscle cells (group 2); and extensive endocardial fibrosis and adhesion of the left ventricle (group 3). Aortic thromboembolism was commonly observed in the cats of all three groups. These clinical and pathologic findings indicate that cardiomyopathy in the cat or dog is similar to the three forms of cardiomyopathy in humans (hypertrophic, congestive, and restrictive). Images FIG. 2 FIG. 3 FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 9 FIG. 11 FIG. 12 FIG. 13 FIG. 15 FIG. 16 FIG. 17 FIG. 20 FIG. 21 FIG. 22 FIG. 24 FIG. 25 PMID:6447412

  2. Experimental Induction of Atheroarteriosclerosis by the Synergy of Allergic injury to Arteries and Lipid-Rich Diet

    PubMed Central

    Minick, C. Richard; Murphy, George E.

    1973-01-01

    Rabbits fed a lipid-rich, cholesterol-poor diet and given concomitant injections of foreign protein, over a period as long as 17 months, developed in their coronary arteries both a) proliferative fibromuscular intimal thickening closely resembling the diffuse intimal thickening that commonly occurs in coronary arteries of man, and b) fatty-proliferative fibromuscular intimal thickening that closely resembles coronary atherosclerosis in man. In contrast, rabbits of another group that were concurrently fed the same diet for as long as 22 months without injections of foreign protein developed changes in arteries of their hearts that resemble neither coronary atherosclerosis nor diffuse intimal thickening in man. Fatty-proliferative changes in aortas of the first group of rabbits are strikingly greater and more closely resemble human aortic atherosclerosis than those in the latter group. In the course of the experiments, the average serum cholesterol was not significantly different in the two groups of rabbits. It was approximately 200 to 250 mg%, which is the average serum cholesterol in adult humans in the United States. These experiments support the hypothesis that the synergy of arterial injury, in particular immunologic injury, and a diet rich in lipid can lead to atherosclerosis in man. ImagesFig 24Fig 25Fig 26,27Fig 28Fig 29Fig 30Fig 31Fig 32Fig 33Fig 34Fig 1Fig 2Fig 3Fig 4Fig 5Fig 6Fig 7Fig 35Fig 36Fig 37Fig 38Fig 8Fig 9Fig 10Fig 11Fig 12Fig 13Fig 14Fig 15Fig 16Fig 17Fig 18Fig 19Fig 20Fig 21Fig 22Fig 23 PMID:4758786

  3. Age changes in the triangular fibrocartilage of the wrist joint.

    PubMed Central

    Mikić, Z D

    1978-01-01

    On the basis of a study of 180 wrist joints from 100 fresh cadavers of individuals ranging in age from fetuses to 94 years, it is concluded that the triangular fibro-cartilage is very liable to degenerative alterations associated with ageing. Degeneration begins in the third decade and progressively increases in frequency and severity in subsequent decades. The changes comprise reduced cellularity, loss of elastic fibres, mucoid degeneration of the ground substance, exposure of collagen fibres, fibrillation, erosion, ulceration, abnormal thinning, and, ultimately, disc perforation. The changes are more frequent and more intense on the ulnar surface, and they are always situated in the central part of the disc. It appears that disc perforation is degenerative and age-related: thus there were no perforations in the first two decades of life; in the third there were 7.6%, in the fourth 18.1%, in the fifth 40.0%, in the sixth 42.8%, and in the over sixties 53.1%. There was an associated pattern of degenerative changes in the wrist joint as a whole. The structures adjacent to the articular disc (discal surface of the ulnar head, discal part of the lunate) were much more often involved, and the changes were much more advanced, than on non-discal surfaces. It is argued that this is because of more intensive biomechanical forces, particularly rotational forces, in the disc compartment of the joint. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 (cont.) Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 PMID:670069

  4. Structural changes in fluorosed dental enamel of red deer (Cervus elaphus L.) from a region with severe environmental pollution by fluorides.

    PubMed Central

    Kierdorf, U; Kierdorf, H; Sedlacek, F; Fejerskov, O

    1996-01-01

    A macroscopic, microradiographic and scanning electron microscope study was performed on the structure of fluorosed dental enamel in red deer from a fluoride polluted region (North Bohemia, Czech Republic). As was revealed by analysis of mandibular bone fluoride content, the rate of skeletal fluoride accumulation in the fluorotic deer was about 6 times that in controls taken from a region not exposed to excessive fluoride deposition. In all fluorosed mandibles, the 1st molar was consistently less fluorotic than the other permanent teeth. This was related to the fact that crown formation in the M1 takes place prenatally and during the lactation period. Fluorosed teeth exhibited opaque and posteruptively stained enamel, reduction or loss of enamel ridges, moderately to grossly increased wear and, in more severe cases, also enamel surface lesions of partly posteruptive, partly developmental origin. Microradiographically, fluorosed enamel was characterised by subsurface hypomineralisation, interpreted as a result of fluoride interference with the process of enamel maturation. In addition, an accentuation of the incremental pattern due to the occurrence of alternating bands with highly varying mineral content was observed in severely fluorosed teeth, denoting fluoride disturbance during the secretory stage of amelogenesis. A corresponding enhancement of the incremental pattern was also seen in the dentine. The enamel along the more pronounced hypoplasias consisted of stacked, thin layers of crystals arranged in parallel, indicating that the ameloblasts in these locations had lost the distal (prism-forming) portions of their Tomes processes. The findings of the present study indicate that red deer are highly sensitive bioindicators of environmental pollution by fluorides. Images Figs 2-9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 PMID:8655406

  5. Prolonged administration of antithymocyte serum in mice. II. Histopathological investigation

    PubMed Central

    Simpson, Elizabeth; Nehlsen, Sandra L.

    1971-01-01

    Prolonged administration of ATS to mice resulted in depletion of small lymphocytes in the thymus-dependent (paracortical) areas of lymph nodes in all mice. Small lymphocyte depletion of the thymus-dependent periarteriolar region of the spleen was present in most mice, although this feature was masked by plasmacytosis in this region in some. Depletion of small lymphocytes in the thymus-dependent areas of Peyer's patches was evident in some of the younger mice. None of these changes in lymphoid organs were seen in control mice, untreated or given NRS. The thymus was unaffected except in some ATS- or NRS-treated mice which were sick and/or old, in which the narrowing of the thymic cortex was attributed to non-specific stress. Plasmacytosis was seen in the medullae of lymph nodes of both ATS- and NRS-treated mice, although it was more intense in the latter. In non-lymphoid organs the most striking changes were seen in the kidneys of mice treated both with ATS and NRS. Complex-type nephritis followed by amyloidosis was seen in a large proportion of mice over 6 months old in both these groups and in these mice amyloid was seen frequently in other organs, including spleen and liver. Tumours occurred in fifty-four ATS-treated mice, but in no other group. Fifty-two of these tumours were attributable to polyoma virus; two other were lymphoblastomas. Reticulum cell hyperplasia was seen in two further mice. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18 PMID:4326920

  6. Cell death during the postnatal morphogenesis of the normal rabbit kidney and in experimental renal polycystosis.

    PubMed Central

    García-Porrero, J A; Ojeda, J L; Hurlé, J M

    1978-01-01

    We have studied, by means of optic and electron microscopy, the normal and abnormal cell death that takes place during the postnatal morphogenesis of rabbit kidney, and in the experimental renal polycystosis produced by methylprednisolone acetate. In the normal kidney intertubular cell death can be observed during the first 20 days of the postnatal development. However, cell death in the normal metanephric blastema is a very rare event. In the polycystic kidney numerous dead cells can be seen between the third and forty eighth days after injection. The topography and morphology of the dead cells depend on the stage in the evolution of the disease. In the 'stage of renal immaturity', dying and dead cells are present in the nephrogenic tissue, in the dilating collecting tubules and in the intertubular spaces. In this stage the cellular pathology is essentially nuclear. In the stage of tubular cysts, the dead cells are mostly located in the walls of cysts, with some dead cells, but mostly cellular debris in their lumina. At this stage the cellular pathology is basically cytoplasmic. The dead cells are eventually digested by what appear to be phagocytes of tubular epithelial origin. It is suggested that cell death is an important factor in the evolution of the lesions of renal polycystosis induced by corticosteroids, and probably in the initiation of the pathological process as well. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:670065

  7. Quantitative studies of the regeneration of rat myelinated nerve fibres: variations in the number and size of regenerating fibres after repeated localized freezings.

    PubMed Central

    Mira, J C

    1979-01-01

    The number and size of myelinated nerve fibres were determined in the nerve to the medial head of the gastrocnemius muscles of rats whose left sciatic nerve was repeatedly frozen (one to five times at three weekly intervals). The contralateral nerve was used as a control. Results varied according to the number of freezings performed and, for a given number of freezings, according to the period of regeneration. When measurements were completed 1 month after the last of several localized freezings, the number of regenerating myelinated nerve fibres increased regularly up to the third freezing, reaching to about 220% of the control value, but no higher values were recorded after four or five freezings. The nerve fibre distribution was unimodal in all the nerves studied. The mean diameter of all myelinated fibres decreased with the number of freezings from 50% of the control value after the first to 36% after the fifth. When measurements were made 1, 3, 6, 12 and 18 months after the third and final freezing, the number of regenerating myelinated nerve fibres decreased by about 30% between the first and third month and then stabilized at 190% of the control value. Nerve fibre distribution became bimodal from the third month onwards, and the mean diameter of all myelinated fibres increased regularly. However, by the eighteenth month, the size of regenerated myelinated nerve fibres had only reached 70% of the normal contralateral value. Images Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 15 Fig. 16 Fig. 17 Fig. 18 PMID:511774

  8. The harderian gland: a tercentennial review.

    PubMed Central

    Payne, A P

    1994-01-01

    The harderian gland was first described in 1694 by Johann Jacob Harder (1656-1711). It occurs in most terrestrial vertebrates and is located within the orbit where, in some species, it is the largest structure. It may be compound tubular or compound tubuloalveolar, and its secretory duct is usually morphologically distinct only after leaving the substance of the gland to open on the surface of the nictitating membrane. The tubules of the gland are formed of a single layer of columnar epithelial cells surrounded by myoepithelial cells. The chief product(s) of the gland varies between different groups of vertebrates, and epithelial cells possess granules or vacuoles whose contents may be mucous, serous or lipid. In rodents, the gland synthesises lipids, porphyrins and indoles. In the case of lipid vacuoles, the gland is unusual in releasing these by an exocytotic mechanism. It is unclear whether the gland can act both as an exocrine and endocrine organ. There is control of gland structure and synthesis through a variety of humoral agents, including gonadal, thyroid and pituitary hormones; in addition there is a rich autonomic innervation and many neuropeptides have been identified. The proposed functions of the gland are remarkably diverse and include the gland being (1) a source of 'saliva', (2) a site of immune response, (3) a photoprotective organ, (4) part of a retinal-pineal axis, (5) a source of pheromones, (6) a source of thermoregulatory lipids, (7) a site of osmoregulation, and (8) a source of growth factors. The gland is discussed in terms of its embryology and phylogeny, and in relation to ecological variables. Several goals of future research are identified. Images Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 36 Fig. 37 Fig. 38 Fig. 40 PMID:7559104

  9. Angiographic studies of quinton—scribner arteriovenous cannulae

    PubMed Central

    Dathan, J. R.; Thompson, J. M. A.; Worthington, B. S.

    1969-01-01

    An analysis of 86 angiographic studies of Quinton–Scribner shunts has shown that these may be very useful in determining the cause and helping in the management of poorly functioning cannulae in patients on regular haemodialysis treatment. ImagesFig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8 PMID:5822081

  10. Cytochemical localisation and characterisation of proteoglycans (glycosaminoglycans) in the epithelial-stromal interface of the seminal vesicle of the guinea pig.

    PubMed Central

    Chan, L; Wong, Y C

    1992-01-01

    . 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 PMID:1280636

  11. Endemic syphilis in the Bakwena Reserve of the Bechuanaland Protectorate

    PubMed Central

    Murray, J. F.; Merriweather, A. M.; Freedman, M. L.

    1956-01-01

    A form of endemic syphilis exists in the Bakwena Reserve of the Bechuanaland Protectorate known by the local name of “dichuchwa”. It is similar to bejel, njovera and the endemic syphilis reported elsewhere in the world. The Government of the Protectorate, with the assistance of WHO and UNICEF, began in November 1953 a mass campaign in the Reserve to control this disease and, at the same time, to study its epidemiological, clinical, social and therapeutic aspects. The seropositivity rate in the Reserve was found to be 37%. Dichuchwa is a childhood and family disease, usually spread non-venereally. The early lesions are similar to secondary lesions of sporadic venereal syphilis, and are often followed by tertiary lesions affecting mainly the skin, nasopharynx and long bones. Primary lesions are rare but may occur under certain epidemiological conditions if the inoculum is sufficiently large; thus a mother may develop primary sores on the nipples through suckling an infected infant. Lesions of the cardiovascular and central nervous systems and congenital syphilis are also rare. Superinfection of an already infected and allergic host is probably the chief reason for the frequency of the tertiary lesions. Treatment of the disease with penicillin is very effective, and the authors believe that mass treatment of cases and contacts combined with an improvement in the standards of hygiene could eradicate the disease. ImagesFig. 61Fig. 62Fig. 63Fig. 64Fig. 74Fig. 75Fig. 76Fig. 1Fig. 2Fig. 3Fig. 16Fig. 17Fig. 18Fig. 43Fig. 44Fig. 45Fig. 7Fig. 8Fig. 9Fig. 13Fig. 14Fig. 15Fig. 31Fig. 32Fig. 33Fig. 50Fig. 51Fig. 52Fig. 53Fig. 54Fig. 55Fig. 56Fig. 34Fig. 35Fig. 36Fig. 46Fig. 47Fig. 48Fig. 49Fig. 22Fig. 23Fig. 24Fig. 10Fig. 11Fig. 12Fig. 57Fig. 58Fig. 59Fig. 60Fig. 65Fig. 66Fig. 67Fig. 19Fig. 20Fig. 21Fig. 4Fig. 5Fig. 6Fig. 68Fig. 69Fig. 70Fig. 71Fig. 72Fig. 73Fig. 37Fig. 38Fig. 39Fig. 28Fig. 29Fig. 30Fig. 25Fig. 26Fig. 27Fig. 40Fig. 41Fig. 42 PMID:13404470

  12. Light and Electron Microscopic Studies of the Rat Kidney After Administration of Inhibitors of the Citric Acid Cycle In Vivo

    PubMed Central

    McDowell, Elizabeth M.

    1972-01-01

    2Fig 3Fig 4Fig 5Fig 6Fig 7Fig 8Fig 9Fig 10Fig 11Fig 12Fig 13Fig 14Fig 15Fig 16Fig 17Fig 18Fig 19 PMID:4258508

  13. Pacesetters of the American image or (a case for a pleasant diversion).

    PubMed Central

    Hook, E. W.

    1992-01-01

    Regardless of how you resolve the morality of our history, the fact is that Currier and Ives documented in their own special and often biased way the iconography of the growth and development of the United States of America (Fig. 88) in some of the most eventful years of its history from about 1840 through 1895. Now, as we near our 500th anniversary commemoration of Columbus' voyage to the Americas, it seems especially appropriate to review--to think about all of this. I think you have sensed, as we have gone along, that learning about Currier and his colleagues--these pacesetters of the American Image--has meant, as Osler predicted, a pleasant diversion for me. These activities have carried me into new areas of interest, expanding my perspective of the American Image--of people, of medicine, of life in general, and aiding in the identification of values, my own, as well as those of others. All along, my knowledge has been enhanced, especially of the history of this wonderful complex country of ours. Furthermore, and of considerable importance, this endeavor has sharpened my power of observation. I have, like a good doctor should do, learned to look better! Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 19 Fig. 18 Fig. 20 Fig. 21 Fig. 23 Fig. 25 Fig. 27 Fig. 26 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 Fig. 36 Fig. 37 Fig. 39 Fig. 40 Fig. 41 Fig. 42 Fig. 43 Fig. 44 Fig. 45 Fig. 46 Fig. 47 Fig. 48 Fig. 49 Fig. 50 Fig. 51 Fig. 52 Fig. 53 Fig. 54 Fig. 55 Fig. 56 Fig. 57 Fig. 58 Fig. 59 Fig. 60 Fig. 61 Fig. 62 Fig. 63 Fig. 64 Fig. 65 Fig. 66 Fig. 68 Fig. 67 Fig. 69 Fig. 70 Fig. 71 Fig. 72 Fig. 73 Fig. 74 Fig. 75 Fig. 76 Fig. 77 Fig. 78 Fig. 79 Fig. 80 Fig. 82 Fig. 81 Fig. 83 Fig. 84 Fig. 85 Fig. 86 Fig. 87 Fig. 88 PMID:1413369

  14. Urinary Tract Refunctionalization After Prior Diversion in Children

    PubMed Central

    Hendren, W. Hardy

    1974-01-01

    Thirty-two children who had undergone previous urinary diversion were operated upon to refunctionalize the bladder. In 24 the diversion had been considered permanent, and in eight, temporary. Success in these procedures suggests that many young patients deserve a second look for possible “undiversion.” ImagesFig. 6.Fig. 7.Fig. 8.Fig. 9.Fig. 10.Fig. 11.Fig. 12.Fig. 13.Fig. 14.Fig. 15.Fig. 16.Fig. 17a.Fig. 17b.Fig. 18. PMID:4416811

  15. The susceptibility of rodents to schistosome infection, with special reference to Schistosoma haematobium

    PubMed Central

    Gear, J. H. S.; Davis, D. H. S.; Pitchford, R. J.

    1966-01-01

    In this investigation the susceptibility of several species of rodents—Praomys (Mastomys) natalensis, Saccostomus campestris, Arvicanthus niloticus, Aethomys chrysophilus, Tatera brantsi and the white mouse (SAIMR 200 strain)—to Schistosoma haematobium was determined and the pathology studied. From the results it is clear that these rodents are susceptible to infection with Schistosoma haematobium. For various reasons, notably adaptability to laboratory conditions, the most suitable as laboratory animals for the study of bilharziasis are Saccostomus campestris, Arvicanthus niloticus and Praomys (Mastomys) natalensis. These three species breed readily in the laboratory and show a high susceptibility to S. haematobium, with characteristic lesions involving several organs, including the lungs, liver, spleen, pancreas and intestine. ImagesFIG. 1FIG. 2FIG. 3FIG. 4FIG. 5FIG. 6FIG. 7FIG. 8FIG. 9FIG. 10FIG. 16FIG. 17FIG. 18FIG. 19FIG. 20FIG. 11FIG. 12FIG. 13FIG. 14FIG. 15 PMID:5297005

  16. Orthotics in Sports Shoes

    PubMed Central

    Schamberger, Wolf

    1983-01-01

    We are all born with a varying assortment of biomechanical discrepancies. Ordinarily these may be of no consequence, but to those who try to achieve excellence in a certain sport these discrepancies can spell the difference between success and failure. Some athletes may have to accept the fact that biomechanically the odds are against them ever becoming excellent and that intensive training may in fact be detrimental to their wellbeing. However, the majority can be helped with advice on proper shoe wear and orthotic correction. This article highlights the role of foot orthotics as indicated for various biomechanically-related problems commonly encountered in athletes. ImagesFig. 5Fig. 6Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 15Fig. 16Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 23 PMID:21283401

  17. The endocrine polypeptide cells of the human stomach, duodenum, and jejunum

    PubMed Central

    Pearse, A. G. E.; Coulling, I.; Weavers, B.; Friesen, S.

    1970-01-01

    Thirty specimens of stomach, duodenum, and jejunum, removed at operation, were examined by optical microscopical, cytochemical, and electron microscopical techniques. The overall distribution of four types of endocrine polypeptide cell in the stomach, and three in the intestine, was determined. The seven cell types are described by names and letters belonging to a scheme for nomenclature agreed upon at the 1969 Wiesbaden conference on gastrointestinal hormones. The gastrin-secreting G cell was the only cell for which firm identification with a known hormone was possible. Although there was wide variation in the distribution of the various cells, from one case to another, striking differences were nevertheless observable, with respect to the G cell, between antra from carcinoma and from ulcer cases. ImagesFig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17 PMID:4919258

  18. The Reflexes of the Fundus Oculi

    PubMed Central

    Ballantyne, A. J.

    1940-01-01

    fragmented” surface reflexes, or as evidence of the presence of some highly refractile substance, such as cholesterin or calcium carbonate, in a retinal exudate or other lesion. It is characteristic of the pathological reflexes that they come and go and change their character according to the progress of the pathological condition. The linear reflexes in particular may change from one from to another, and may be finally transformed into surface reflexes of physiological character. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 23Fig. 24Fig. 25Fig. 26 PMID:19992307

  19. Histopathology and Distribution of Viral Antigens in Hamsters Infected with Virulent and Benign Venezuelan Encephalitis Viruses

    PubMed Central

    Jahrling, P. B.; Scherer, W. F.

    1973-01-01

    Lethalities and virulences of Venezuelan encephalitis (VE) viruses for hamsters were found to correlate with severity of histopathologic lesions in hematopoietic and brain tissues. Highly virulent strains (subtype I) destroyed marrow and lymphoid cells rapidly and produced intestinal wall damage; focal brain hemorrhages and destruction of Purkinje cells also occurred within the 4 to 5 days between subcutaneous inoculation and death. Like subtype I virus, a slightly less virulent strain (subtype II) also caused necrosis of bone marrow and brain lesions, but only minimal lymphoid cell damage occurred. The less virulent subtype III VE virus, which killed hamsters between 4 and 14 days after inoculation, usually caused no lesions in hematopoietic tissues, and deaths were related chiefly to hemorrhagic brain lesions and necrosis of Purkinje cells. Two VE viruses, benign for hamsters (the TC-83 attenuated vaccine strain and subtype IV), usually caused no necrosis of hematopoietic or brain tissues; focal extravasations of blood and swollen glial cells were found in brains of the rare hamsters that died. The degrees of necrosis seen in tissues stained with hematoxylin and eosin correlated with the quantities of viral antigens detected by fluorescent antibody, except in pancreas and small intestinal smooth muscle and glands, where antigens of subtype I virus were present without morphologic damage. ImagesFig 5-6Fig 7-8Fig 9Fig 10Fig 11Fig 12Fig 13Fig 14Fig 15Fig 16Fig 1-4 PMID:4578265

  20. On the ovarian bursa of the golden hamster. II. Intercellular connections in the bursal epithelium and passage of ferritin from the cavity into lymphatics.

    PubMed Central

    Nakatani, T; Shinohara, H; Matsuda, T

    1986-01-01

    Cell abutments in the ovarian bursal epithelium of the golden hamster included tight junctions, desmosome-like junctions, gap junctions and zonulae adhaerentes. The plasma membranes of adjacent epithelial cells were often closely apposed forming a zonula adherens at the apex of the intercellular space, but these did not fuse along the entire length of the intercellular space. Gap junctions and other intercellular junctions did not allow diffusion of ferritin into the junctional areas, but failed to prevent ferritin from filling the intercellular space basal to the junction. This suggested that these junctions were not continuous around the entire circumference of the cell. In general, intercellular connections in the bursal epithelium may be labile and this lability, as well as periodic distention of the bursa, may give rise to separation of epithelial cells. Ferritin injected into the bursal cavity reached lymphatics via three routes: (1) via stomata; (2) via gaps and pores; (3) via intercellular spaces. Transcellular transport did not make a major contribution to permeation of ferritin across the bursal epithelium, and ferritin particles did not enter fenestrated blood vessels within 30 minutes after injection. The variety of routes may facilitate rapid and complete drainage of fluid and cellular components from the bursal cavity. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Figs. 12-13 Fig. 14 Fig. 15 Fig. 16 Figs. 17-18 PMID:3693080

  1. The fine structure of the human fetal urinary bladder. Development and maturation. A light, transmission and scanning electron microscopic study.

    PubMed Central

    Newman, J; Antonakopoulos, G N

    1989-01-01

    The urinary bladders of 27 human fetuses, aged 7 weeks to full term, were studied by light, transmission and scanning electron microscopy to establish the sequence of events in the development and maturation of the organ during fetal life. In the early specimens, 7-12 weeks old, the urinary bladder was lined by a bilayered, cuboidal and glycogen-rich epithelium. During the 13-17th weeks the epithelium thickened, a third layer developed and by light microscopy it now resembled urothelium. By 21 weeks this had evolved into a 3-4 layer thick epithelium with typical ultrastructural urothelial characteristics. Smooth muscle cells emerged from the condensed mesenchyme of the bladder wall by the 12th week of gestation, initially in the cephalic part of the organ but spreading within a week into the caudal end. Our findings indicate that the human fetal bladder undergoes a series of vital developmental changes during 13-21 weeks of gestation finally acquiring the typical urothelial lining and a well-developed muscular coat. Images Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 PMID:2621133

  2. The Treatment of the Incompletely Descended Testis

    PubMed Central

    Wilson, D. S. Poole

    1939-01-01

    (1) Under three years of age the diagnosis of the incompletely descended testis is uncertain. (2) The policy of awaiting spontaneous descent may be pursued until 10 years of age but, unless the testis lies in the superior scrotal position, this policy should not be persisted in thereafter. (3) Hormonal therapy may be employed before operative treatment as a means of determining testes which will descend spontaneously. It should only be used in the prepuberty period. (4) Operative treatment may be safely carried out at any age after 3 years and should be completed before puberty. The optimum period is between 8 and 11 years. The Bevan operation may be successful when the testis is very mobile but the most consistent results are obtained by the septal transposition or Keetley-Torek operations. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 8Fig. 9Fig. 10Fig. 13Fig. 14Fig. 15Fig. 16Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22 PMID:19991991

  3. Comparative effects of cortisone, dianabol and enovid on isoprenaline-induced myocardial infarction in arteriosclerotic vs nonarteriosclerotic rats.

    PubMed Central

    Wexler, B. C.

    1976-01-01

    Male and female nonarteriosclerotic (virgin) and arteriosclerotic (breeder) Sprague-Dawley rats were subjected to acute myocardial infarction with isoprenaline. When myocardial necrosis was most intense, animals were given cortisone (high and low doses), Dianabol, or Enovid. Animals receiving large doses of cortisone manifested the best survival rate during the early stages of myocardial infarction. Although their serum enzyme levels were least elevated and their hearts showed tha least amount of damage, these animals had undergone the most intense body weight loss and began to die suddenly during the later stages of the experiment. These animals also manifested hyperlipidaemia, hyperglycaemia, septicaemia, severe disuse atrophy of their adrenal glands, and reduced Cmpd. B production. Animals treated with low doses of cortisone or with the anabolic and androgenic steroid, Dianabol, manifested none of the myocardial pretective effects of the larger dose of cortisone. These animals displayed a high incidence of left ventricular aneurysm formation concomitant with extensive cartilaginous metaplasia within the aneurysmal sites. Treatment with the contraceptive drug, Enovid, caused body weight loss, hyperlipidaemia, hyperglycaemia, gonadal atrophy and reduction of Cmpd. B production. Although the high dose of cortisone exercised definite salutary effects during early myocardial infarction, chronic treatment led to adrenal disuse atrophy and hypoadrenocorticism associated with sudden death during the later stages of myocardial repair. These findings indicate that proper adjustment of the dose and chronicity of corticosteroids used for treating the crisis of acute myocardial infarction must be made in order to provide effective protection against untoward pathophysiological conditions, acceleration of myocardial repair, but without suppression of adrenal function. Images Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 PMID:1008997

  4. The pathology of Tangier disease. A light and electron microscopic study.

    PubMed Central

    Ferrans, V. J.; Fredrickson, D. S.

    1975-01-01

    Tangier disease (deficiency of high density plasma lipoproteins) is characterized clinically by: low levels of plasma cholesterol; enlarged, orange-yellow to yellow-gray tonsils and, frequently, peripheral neuropathy. Histologic and ultrastructural studies were made of various tissues from 5 patients with Tangier disease, and comparisons were made of these findings with those in the 12 other patients thus far known to have this disease. Deposits of cholesteryl esters were found in: reticuloendothelial cells (foam cells) in tonsils, bone marrow, skin and jejunal submucosa; Schwann cells in peripheral nerves and myenteric plexus; and in nonvascular smooth muscle cells. These deposits appeared electron lucent and intensely birefringent, varied from spherical to crystalline in shape, often were extensively confluent throughout large areas of cytoplasm, and were not limited by membranes. Certain foam cells in bone marrow also contained membrane-limited clusters of lipid particles resembling chylomicrons. The foam cells in Tangier disease differ morphologically from those in numerous lysosomal enzyme deficiency states, particularly Wolman's disease and cholesteryl ester stroage disease, and in proliferative diseases of the reticuloendothelial system in which cholesteryl esters also accumulate in abnormal histiocytes. Morphologic and biochemical data suggest several hypotheses to explain the accumulation of cholesteryl esters in tissues of patients with Tangier disease. Among these hypotheses, the most likely are considered to be the presence in plasma of abnormal lipoprotein particles that are subject to phagocytic removal by reticuloendothelial cells, and the failure of a process that normally removes locally synthesized cholesterol from cells to plasma. (Am J Pathol 78:101-158, 1975) Images Fig 28 Fig 40 Figs 12-15 Fig 16 Figs 17 and 18 Figs 29 and 30 Fig 19 Fig 31 Fig 20 Fig 32 Fig 21 Fig 33 Fig 22 Fig 1 Fig 2 Figs 3 and 4 Fig 34 Fig 35 Fig 5 Fig 6 Fig 7 Fig 36 Figs

  5. Pathological changes in the brains of mice infected with Toxoplasma gondii: a histological, immunocytochemical and ultrastructural study.

    PubMed Central

    Ferguson, D. J.; Graham, D. I.; Hutchison, W. M.

    1991-01-01

    The pathological changes in the brains of mice infected with T. gondii were studied at various intervals between 7 days and 22 months post-infection using histology, immunocytochemistry and electron microscopy. Initially, a few single parasites were observed (day 7) but necrotic lesions and microglial and inflammatory nodules rapidly appeared (9-I4 days). The majority of the lesions between days 9 and I4 contained proliferating toxoplasma and early cyst formation but from 2I days onwards the vast majority of nodules contained neither parasites nor Toxoplasma antigen. Intact intracellular cysts persisted throughout the period of study eliciting no host response. A generalized meningoencephalitis developed by day II and persisted with varying degrees of severity throughout the 22 months studied. At first, the inflammatory cells consisted of lymphocytes and monocyte/macrophages but during the chronic phase plasma cells predominated. In chronic infections, the number of microglial/inflammatory nodules was relatively constant with only a few containing toxoplasmic material resulting from recent cyst rupture. A few brains contained small nodules of dystrophic calcification. This study shows that in these asymptomatic animals, the major feature is perivascular cuffing by mononuclear cells and localized microglial/inflammatory nodules. After the development of the chronic state, there is no obvious increase or decrease in the severity of the pathological changes with time. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Figs. 8-9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 PMID:1883744

  6. Regression of atherosclerosis by the intravenous infusion of specific biochemical nutrient substrates in animals and humans.

    PubMed Central

    Dudrick, S J

    1987-01-01

    Preliminary studies in 400 New Zealand albino rabbits produced a reliable animal model of nutrient-induced atherosclerosis that simulated that observed in humans. Atherosclerosis was then induced in an additional 1600 rabbits in sets of 40 animals each, maintaining plasma cholesterol concentrations between 1000 and 2000 mg/dL for 6-20 weeks. In each set, 10 control rabbits were killed to document baseline atherosclerosis, and the other 30 rabbits were assigned randomly to one of three groups of 10 rabbits. Groups of 10 rabbits were either continued on the atherogenic diet (group I), given standard laboratory rabbit pellets (group II), or infused continuously with specially formulated anticholesterol solutions via central venous catheters (group III) for 6 weeks. At autopsy, atherosclerotic lesions consistently involved 85-95% of the aorta in group I. In group II, atherosclerosis was comparable with the baseline control group with no regression. In group III, regression of atherosclerosis by 90-95% was consistently documented. Correlations between plasma amino acids and plasma cholesterol concentrations were established in four humans with severe atherosclerosis to maximize the cholesterol reduction capacity of the amino acid formulation. Infusion of the modified total parenteral nutrition solution induced prompt reduction in plasma cholesterol levels by 40-60% regardless of the initial level and was accompanied by evidence of regression of atherosclerosis after a 90-day infusion therapy period. Images Fig. 1. Fig. 2. Fig. 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 18. Fig. 19. Fig. 20. PMID:3115205

  7. Structure of the Thylakoids and Envelope Membranes of the Cyanelles of Cyanophora paradoxa1

    PubMed Central

    Giddings, Thomas H.; Wasmann, Cathy; Staehelin, L. Andrew

    1983-01-01

    isolated cyanelles exhibits two additional layers: (a) a 5- to 7-nanometer-thick layer that lies adjacent to the inner membrane and which seems to correspond to the peptidoglycan layer of cyanobacteria; and (b) a layer external to the purported peptidoglycan layer that exhibits fracture faces similar to those of the lipopolysaccharide layer of gram negative bacteria. Our findings indicate that the supramolecular architecture of cyanelles differs only slightly from free-living cyanobacteria to which they are presumably related. Images Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 1 Fig. 2 Fig. 3 Fig. 6 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 16 Fig. 17 Fig. 18 PMID:16662839

  8. An Experimental Investigation of the Lymphatic System of the Teeth and Jaws

    PubMed Central

    MacGregor, Alexander

    1936-01-01

    are given, and the lines on which further experiments are being continued are indicated. Finally, the application of the results to the pathology of infection in this region, particularly paradontal disease, is given, and also their application to the phenomena of injection anæsthesia. ImagesFig. 18Fig. 19Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17 PMID:19990818

  9. Resonance formation in photon-photon collisions

    SciTech Connect

    Gidal, G.

    1988-08-01

    Recent experimental progress on resonance formation in photon-photon collisions is reviewed with particular emphasis on the pseudoscalar and tensor nonents and on the ..gamma gamma..* production of spin-one resonances. 37 refs., 17 figs., 5 tabs.

  10. Hydroxyalkyl phosphine compounds for use as diagnostic and therapeutic pharmaceuticals

    DOEpatents

    Katti, K.V.; Singh, P.R.; Reddy, V.S.; Katti, K.K.; Volkert, W.A.; Ketring, A.R.

    1999-03-02

    This research discloses a compound and method of making a compound for use as a diagnostic or therapeutic pharmaceutical comprises a functionalized hydroxyalkyl phosphine ligand and a metal combined with the ligand. 16 figs.

  11. Stabilized polyacrylic saccharide protein conjugates

    DOEpatents

    Callstrom, M.R.; Bednarski, M.D.; Gruber, P.R.

    1996-02-20

    This invention is directed to water soluble protein polymer conjugates which are stable in hostile environments. The conjugate comprises a protein which is linked to an acrylic polymer at multiple points through saccharide linker groups. 16 figs.

  12. VizieR Online Data Catalog: Comet ion acoustic waves code (Gunell+, 2017)

    NASA Astrophysics Data System (ADS)

    Gunell, H.; Nilsson, H.; Hamrin, M.; Eriksson, A.; Odelstad, E.; Maggiolo, R.; Henri, P.; Vallieres, X.; Altwegg, K.; Tzou, C.-Y.; Rubin, M.; Glassmeier, K.-H.; Stenberg Wieser, G.; Simon Wedlund, C.; de Keyser, J.; Dhooghe, F.; Cessateur, G.; Gibbons, A.

    2017-01-01

    The general package for dispersion relations and fluctuation calculations using simple pole expansions is in the directory named simple. The directory ThisPaper contains files that are specific to the present paper. ThisPaper/startup.m sets up paths and physical constants. ThisPaper/aa16appendix.m plots the figure in the appendix. ThisPaper/aa16figs7to9.m performs the computations behind Figs. 7-9 and plots those figures. ThisPaper/aa16fig6.m performs the computations behind Fig. 6 and plots it. (2 data files).

  13. Multiple input electrode gap controller

    DOEpatents

    Hysinger, C.L.; Beaman, J.J.; Melgaard, D.K.; Williamson, R.L.

    1999-07-27

    A method and apparatus for controlling vacuum arc remelting (VAR) furnaces by estimation of electrode gap based on a plurality of secondary estimates derived from furnace outputs. The estimation is preferably performed by Kalman filter. Adaptive gain techniques may be employed, as well as detection of process anomalies such as glows. 17 figs.

  14. Sealing apparatus for airfoils of gas turbine engines

    DOEpatents

    Jones, R.B.

    1998-05-19

    An improved airfoil tip sealing apparatus is disclosed wherein brush seals are attached to airfoil tips with the distal ends of the brush seal fibers sealingly contacting opposing wall surfaces. Embodiments for variable vanes, stators and both cooled and uncooled turbine blade applications are disclosed. 17 figs.

  15. Miscellaneous Burial Recovery in Eastern Washington, 1981.

    DTIC Science & Technology

    1983-01-01

    Economics and James B. Johnson, Associate Professor, Department of Entomology , kindly took time from their already busy schedules to assist us with the... Entomology , University of Idaho. Puparia of blowflies (Diptera: Calliphoridae) were in the majority. Also present were elytra 17 Fig. 7...Northwest Anthropological Research Notes, 13(2):159-174. Moscow. Krogman, Wilton Marion 1962 The Human Skeleton in Forensic Medicine

  16. Smart, passive sun facing surfaces

    DOEpatents

    Hively, L.M.

    1996-04-30

    An article adapted for selectively utilizing solar radiation comprises an absorptive surface and a reflective surface, the absorptive surface and the reflective surface oriented to absorb solar radiation when the sun is in a relatively low position, and to reflect solar radiation when the sun is in a relatively high position. 17 figs.

  17. Evaluation of polarized fuels in a commercial deuterium/tritium tokamak reactor

    SciTech Connect

    Finn, P.A.; Brooks, J.N.; Ehst, D.A.; Gohar, Y.; Mattas, R.F.; Baker, C.C.

    1985-12-01

    The use of polarized fuels in commercial deuterium-tritium tokamak fusion reactors has been assessed. Some of the advantages cited for this fueling modification have been evaluated. Although the advantages are real, their magnitude is such that polarized fuels do not appear to be a significant reactor in increasing the attractiveness of commercial reactor designs. 17 figs., 19 tabs.

  18. Prairie basin wetlands of the Dakotas: A community profile

    SciTech Connect

    Kantrud, H.A.; Krapu, G.L.; Swanson, G.A. . Northern Prairie Wildlife Research Center)

    1989-09-01

    This description of prairie basin wetlands of the Dakotas is part of a series of community profiles on ecologically important wetlands of national significance. This region is famous as the producer of at least half of North America's waterfowl and an unknown, but large, proportion of other prairie-dwelling marsh and aquatic birds. 185 refs., 17 figs., 10 tabs.

  19. Groundwater studies at Rio Blanco Oil Shale Company's retort 1 at Tract C-a

    SciTech Connect

    Nordin, J.S.; Poulson, R.; Hill, S.; Suthersan, S.

    1987-11-01

    Western Research Institute has continued to assess groundwater at the site of the 1981 modified in situ oil shale retorting tests at Federal Prototype Lease Trace C-a near Rifle, Colorado. The organic constituents, the toxicology, and the microorganisms associated with the groundwater are discussed in this report. 22 refs., 17 figs., 15 tabs.

  20. Assessment of speciation techniques including the application of photoacoustic spectroscopy

    SciTech Connect

    Bucher, J.; Gehmecker, H.; Edelstein, N.

    1985-08-01

    This document describes laboratory experiments that compare chromatographic and spectroscopic methods for rapidly characterizing ionic species in detail. These techniques were tested on various radioactive ion systems to develop a rapid, accurate approach to site characterization for use with Remedial Action Programs. Promising techniques were evaluated. 9 refs., 16 figs., 2 tabs.

  1. Lightning: Understanding it and protecting systems from its effects

    SciTech Connect

    Hasbrouck, R.T.

    1989-04-10

    This tutorial will raise the reader's level of lightning consciousness by providing an overview of the atmospheric electrification process and by discussing the development and characteristics of a lightning discharge. Next, techniques and instrumentation for lightning threat warning, detection and tracking will be presented. Finally, the principles of protection will be discussed, along with several methods for testing that protection. 15 refs., 16 figs.

  2. Kits and methods of detection using cellulose binding domain fusion proteins

    SciTech Connect

    Shoseyov, O.; Yosef, K.

    1998-04-14

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  3. Methods of use of cellulose binding domain proteins

    SciTech Connect

    Shoseyov, O.; Shpiegl, I.; Goldstein, M.A.; Doi, R.H.

    1997-09-23

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  4. Highly oxidized superconductors

    DOEpatents

    Morris, D.E.

    1994-09-20

    Novel superconducting materials in the form of compounds, structures or phases are formed by performing otherwise known synthesis in a highly oxidizing atmosphere rather than that created by molecular oxygen at atmospheric pressure or below. This leads to the successful synthesis of novel superconducting compounds which are thermodynamically stable at the conditions under which they are formed. 16 figs.

  5. Method of producing highly oxidized superconductors containing barium, copper, and a third metal

    DOEpatents

    Morris, D.E.

    1996-02-20

    Novel superconducting materials in the form of compounds, structures or phases are formed by performing otherwise known syntheses in a highly oxidizing atmosphere rather than that created by molecular oxygen at atmospheric pressure or below. This leads to the successful synthesis of novel superconducting compounds which are thermodynamically stable at the conditions under which they are formed. 16 figs.

  6. Cartilage hair hypoplasia.

    PubMed Central

    Siggers, D. C.; Burke, J. B.; Morris, B.; Normand, I. C.; Tanner, J. M.; Williamson, D. A.

    1977-01-01

    Six cases of cartilage hair hypoplasia from five kindreds are described. They demonstrate variation in the expression of clinical features such as sparsity of hair, hair calibre, radiological changes, short stature and the extent of the disproportion between sitting height and stature. Images Figs. 1-6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 PMID:917962

  7. Electric sales and revenue 1996

    SciTech Connect

    1997-12-01

    Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the US. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1996. 16 figs., 20 tabs.

  8. Lanthanide Al-Ni base Ericsson cycle magnetic refrigerants

    DOEpatents

    Gschneidner, K.A. Jr.; Takeya, Hiroyuki

    1995-10-31

    A magnetic refrigerant for a magnetic refrigerator using the Ericsson thermodynamic cycle comprises DyAlNi and (Gd{sub 0.54}Er{sub 0.46})AlNi alloys having a relatively constant {Delta}Tmc over a wide temperature range. 16 figs.

  9. On the HEMP (high-altitude electromagnetic pulse) response of protective relays

    SciTech Connect

    Thomas, D.E.; Wiggins, C.M.; Barnes, P.R.; Oak Ridge National Lab., TN )

    1990-01-01

    An assessment of the susceptibility of protective relays to the transients produced by high-altitude electromagnetic pulse (HEMP) events is presented in this paper. Several mechanisms responsible for coupling of HEMP to relay terminals are examined. The predicted relay responses to HEMP events are compared to measured data on a solid state based relay's impulse. 11 refs., 16 figs.

  10. Polymer surface treatment with particle beams

    DOEpatents

    Stinnett, R.W.; VanDevender, J.P.

    1999-05-04

    A polymer surface and near surface treatment process produced by irradiation with high energy particle beams is disclosed. The process is preferably implemented with pulsed ion beams. The process alters the chemical and mechanical properties of the polymer surface in a manner useful for a wide range of commercial applications. 16 figs.

  11. Cellulose binding domain proteins

    DOEpatents

    Shoseyov, O.; Shpiegl, I.; Goldstein, M.; Doi, R.

    1998-11-17

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  12. Cellulose binding domain fusion proteins

    DOEpatents

    Shoseyov, O.; Yosef, K.; Shpiegl, I.; Goldstein, M.A.; Doi, R.H.

    1998-02-17

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  13. Oligonucleoside alkyl or arylphosphonate derivatives capable of crosslinking with or cleaving nucleic acids

    DOEpatents

    Miller, P.S.; Ts'o, P.O.P.

    1999-06-15

    A composition for inactivating a target nucleic acid which comprises an oligonucleoside alkyl or arylphosphonate analogue which is complementary to the sequence of the target nucleic acid is provided. It includes a functional group which reacts with the target nucleic acid to render the target nucleic acid inactive or nonfunctional. 16 figs.

  14. Model assessment of protective barrier designs: Part 2

    SciTech Connect

    Fayer, M.J.

    1987-11-01

    Protective barriers are being considered for use at the Hanford Site to enhance the isolation of radioactive wastes from water, plant, and animal intrusion. This study assesses the effectiveness of protective barriers for isolation of wastes from water. In this report, barrier designs are reviewed and several barrier modeling assumptions are tested. 20 refs., 16 figs., 6 tabs.

  15. Functionalized Organosilicate Sorbents for Air Purification

    DTIC Science & Technology

    2013-12-23

    synthesized for reactive capture of targets. ADC-10 focused on incorporation of carbonyls for reactive removal of ammonia . CAR-40 focused on...16 Fig. 12 Ammonia breakthrough for E50 sorbents...23 Fig. 21 Ammonia breakthrough for the Cu DIX materials

  16. Method for replicating an array of nucleic acid probes

    DOEpatents

    Cantor, C.R.; Przetakiewicz, M.; Smith, C.L.; Sano, T.

    1998-08-18

    The invention relates to the replication of probe arrays and methods for replicating arrays of probes which are useful for the large scale manufacture of diagnostic aids used to screen biological samples for specific target sequences. Arrays created using PCR technology may comprise probes with 5{prime}- and/or 3{prime}-overhangs. 16 figs.

  17. Geothermal energy program summary

    SciTech Connect

    Not Available

    1990-01-01

    This document reviews Geothermal Energy Technology and the steps necessary to place it into service. Specific topics covered are: four types of geothermal resources; putting the resource to work; power generation; FY 1989 accomplishments; hard rock penetration; conversion technology; and geopressured brine research. 16 figs. (FSD)

  18. Nuclear orbiting

    SciTech Connect

    Shapira, D.

    1988-01-01

    Nuclear orbiting following collisions between sd and p shell nuclei is discussed. The dependence of this process on the real and imaginary parts of the nucleus-nucleus potential is discussed, as well as the evolution of the dinucleus toward a fully equilibrated fused system. 26 refs., 15 figs.

  19. WhiteStar user's guide

    SciTech Connect

    Ezell, T.F.

    1990-08-01

    The WhiteStar project provides design engineers with needed part design data. WhiteStar encourages the use of preferred parts by providing a user-convenient parts database. This report shows selections the user makes in order to obtain information on a particular part. 15 figs.

  20. Nucleic acids encoding a cellulose binding domain

    DOEpatents

    Shoseyov, O.; Shpiegl, I.; Goldstein, M.A.; Doi, R.H.

    1996-03-05

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 15 figs.

  1. Magnetically excited flexural plate wave apparatus

    DOEpatents

    Martin, S.J.; Butler, M.A.; Frye, G.C.; Smith, J.H.

    1998-11-17

    A non-piezoelectric flexural plate wave apparatus having meander-line transducers mounted on a non-piezoelectric membrane is disclosed. A static magnetic field is directed perpendicularly to the conductive legs of the transducers in the plane of the membrane. Single-port, two-port, resonant, non-resonant, eigenmode, and delay-line modes may be employed. 15 figs.

  2. Low-loss, high-speed, high-{Tc} superconducting bearings

    DOEpatents

    Hull, J.R.; Mulcahy, T.M.; Uherka, K.L.

    1996-07-30

    A flywheel energy storage device is disclosed including an iron structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet. The stationary permanent magnet levitates the iron structure while the superconductor structure can stabilize and levitate the rotating iron structure. 15 figs.

  3. Low-loss, high-speed, high-{Tc} superconducting bearings

    DOEpatents

    Hull, J.R.; Mulcahy, T.M.; Uherka, K.L.

    1997-06-24

    A flywheel energy storage device is disclosed including an iron structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet. The stationary permanent magnet levitates the iron structure while the superconductor structure can stabilize the rotating iron structure. 15 figs.

  4. High temperature superconducting fault current limiter

    DOEpatents

    Hull, J.R.

    1997-02-04

    A fault current limiter for an electrical circuit is disclosed. The fault current limiter includes a high temperature superconductor in the electrical circuit. The high temperature superconductor is cooled below its critical temperature to maintain the superconducting electrical properties during operation as the fault current limiter. 15 figs.

  5. Split gland

    DOEpatents

    Petranto, J.J.

    1989-09-05

    A split gland having only three parts is described. The gland has substantially the same stability to the relative motion of the constituent half-gland members during the attachment process to a female fitting as have more complicated designs. Ease of manufacture and use result from the reduction in complexity of the present invention. 15 figs.

  6. Gamma-spectrometry with Compton suppressed detectors arrays

    SciTech Connect

    Schueck, C.; Hannachi, F.; Chapman, R.; Lisle, J.C.; Mo, J.N.; Paul, E.; Love, D.J.G.; Nolan, P.J.; Nelson, A.H.; Walker, P.M.

    1985-01-01

    Recent results of experiments performed with two different Compton-suppressed detectors arrays in Daresbury and Berkeley (/sup 163,164/Yb and /sup 154/Er, respectively), are presented together with a brief description of the national French array presently under construction in Strasbourg. 25 refs., 15 figs.

  7. Method and apparatus for monitoring mercury emissions

    DOEpatents

    Durham, M.D.; Schlager, R.J.; Sappey, A.D.; Sagan, F.J.; Marmaro, R.W.; Wilson, K.G.

    1997-10-21

    A mercury monitoring device that continuously monitors the total mercury concentration in a gas. The device uses the same chamber for converting speciated mercury into elemental mercury and for measurement of the mercury in the chamber by radiation absorption techniques. The interior of the chamber is resistant to the absorption of speciated and elemental mercury at the operating temperature of the chamber. 15 figs.

  8. TWOPOT: a computer model of the two-pot extractive distillation concept for nitric acid

    SciTech Connect

    Jubin, R.T.; Holland, W.D.; Counce, R.M.; Beckwith, D.R.

    1985-05-01

    A mathematical model, TWOPOT, of the ''two-pot'' extractive distillation concept for nitric acid concentration has been developed. Prediction from a computer simulation using this model shows excellent agreement with the experimental data. This model is recommended for use in the design of large-scale, similar-purpose equipment. 9 refs., 15 figs., 2 tabs.

  9. Composite hydrogen separation element and module

    DOEpatents

    Edlund, D.J.

    1996-03-12

    There are disclosed improvements in multicomponent composite metal membranes useful for the separation of hydrogen, the improvements comprising the provision of a flexible porous intermediate layer between a support layer and a nonporous hydrogen-permeable coating metal layer, and the provision of a textured coating metal layer. 15 figs.

  10. Small-scale hydroelectric demonstration project: Reactivation of the Elk Rapids Hydroelectric Facility: Final operation and maintenance report

    SciTech Connect

    Miller, R.G.

    1987-03-01

    Information related to the reactivation of the Elk River Hydroelectric Power facility is reported. This report includes a history of the power plant, pertinent cost data, emergency action plans, inspections and testing, warranty work, operating problems, project data, monthly production data, and monthly operating and maintenance costs. 15 figs., 3 tabs.

  11. Method for assessing motor insulation on operating motors

    DOEpatents

    Kueck, J.D.; Otaduy, P.J.

    1997-03-18

    A method for monitoring the condition of electrical-motor-driven devices is disclosed. The method is achieved by monitoring electrical variables associated with the functioning of an operating motor, applying these electrical variables to a three phase equivalent circuit and determining non-symmetrical faults in the operating motor based upon symmetrical components analysis techniques. 15 figs.

  12. An investigation of the mechanisms of calcination and sulfation in coal-water mixtures

    SciTech Connect

    Christofides, N.

    1990-09-21

    The purpose of this investigation is to study the mechanisms of sulfur capture when burning coal-water-limestone mixtures (CWLM) in fluidized beds. Special care is taken to make comparisons with to dry coal and sorbent under comparable experimental conditions. A series of experiments were performed in an eight-inch diameter bubbling fluidized bed combustor to address this problem. 33 refs., 17 figs., 5 tabs.

  13. Public meeting on increasing western participation in the 1989 Clean Coal Technology Solicitation, Cheyenne, WY, December 1988: Summary proceedings

    SciTech Connect

    Not Available

    1988-01-01

    The purpose of the DOE Public Meeting in Cheyenne, Wyoming on December 2, 1988 was to seek suggestions from the public for possible means to increase Western-project participation in the third solicitation, which will be issued by May 1, 1989. This report contains remarks of the various speakers, summaries of the discussion workshops, background Clean Coal Technology Solicitation materials, and the conference registration list. 17 figs.

  14. Variable reluctance drive system

    SciTech Connect

    Lipo, T.A.; Liang, F.

    1995-10-17

    A variable reluctance drive system including a motor and corresponding converter for improved current commutation is described. The motor incorporates a salient pole rotor and a salient pole stator having one or more full pitch windings which operate by mutual inductance to transfer the current from the active short pitch winding following phase alignment. This increases output torque and/or speed and permits a number of simple and economical converter circuits. 17 figs.

  15. Identification of Stem Cells in a Novel Human Mammary Epithelial Culture (HMEC) System that Reproducibly Demonstrates Ductal Organotypic Architecture in 3 Weeks

    DTIC Science & Technology

    2005-10-01

    maintaining HME stem cells in vitro. Clinically this study on stem cells will allow many laboratories to test the long held hypothesis that some...for CD24, a very marked difference between these cells and the BRL cell lines tested . In addition a very different profile for CD90 and CD81 was...different conditions were tested for 2 of these cell lines but cloning is achievable for all. 17 Fig. 12. Single cell pick up was physically

  16. A New Paradigm for African American Breast Cancer Involving Stem Cell Differentiation in a Novel Cell Culture System

    DTIC Science & Technology

    2006-10-01

    Kreienberg R, Vogel W, Speit G: Induced micronucleus frequencies in periph- eral lymphocytes as a screening test for carriers of a BRCA1 mutation in...tumor cells were positive for CD24, a very marked difference between these cells and the BRL cell lines tested . In addition a very different profile...different conditions were tested for 2 of these cell lines but cloning is achievable for all. 17 Fig. 12. Single cell pick up was physically

  17. Identification of Stem Cells in a Novel Human Mammary Epithelial Culture (HMEC) System that Reproducibly Demonstrates Ductal Organotypic Architecture in 3 Weeks

    DTIC Science & Technology

    2006-10-01

    maintaining HME stem cells in vitro. Clinically this study on stem cells will allow many laboratories to test the long held hypothesis that some...for CD24, a very marked difference between these cells and the BRL cell lines tested . In addition a very different profile for CD90 and CD81 was...different conditions were tested for 2 of these cell lines but cloning is achievable for all. 17 Fig. 12. Single cell pick up was physically

  18. Organosiloxane-grafted natural polymer coatings

    DOEpatents

    Sugama, Toshifumi

    1998-12-01

    A new family of polysaccharide graft polymers are provided as corrosion resistant coatings having antimicrobial properties which are useful on light metals such as aluminum, magnesium, zinc, steel and their alloys. Methods of making the polysaccharide graft polymers are also included. The methods of making the polysaccharide graft polymers involve reacting a polysaccharide source with an antimicrobial agent under conditions of hydrolysis-condensation. 17 figs.

  19. The development of in vitro mutagenicity testing systems using T-lymphocytes

    SciTech Connect

    Albertini, R.J.

    1992-05-01

    This work has focused on the development of in vitro T-cell mutation assays. Conditions have been defined to measure the in vitro induction of mutations at the hypoxanthine-guanine phosphoribosyl transferase (hprt) locus in human T-lymphocytes. This assay is a parallel to our in vivo hprt assay, in that the same cells are utilized. However, the in vitro assay allows for carefully controlled dose response studies. 21 refs., 16 figs., 13 tabs.

  20. The development of in vitro mutagenicity testing systems using T-lymphocytes. Research progress report, November 1, 1989--April 30, 1992

    SciTech Connect

    Albertini, R.J.

    1992-05-01

    This work has focused on the development of in vitro T-cell mutation assays. Conditions have been defined to measure the in vitro induction of mutations at the hypoxanthine-guanine phosphoribosyl transferase (hprt) locus in human T-lymphocytes. This assay is a parallel to our in vivo hprt assay, in that the same cells are utilized. However, the in vitro assay allows for carefully controlled dose response studies. 21 refs., 16 figs., 13 tabs.

  1. Development of a methodology for defining whole-building energy design targets for commercial buildings: Phase 2, Development Concept Stage Report

    SciTech Connect

    McKay, H.N. ); Deringer, J.J. ); Jones, J.W. ); Hall, J.D. )

    1990-09-01

    This report documents eight tasks performed as part of the Whole-Building Energy Design Targets project, in which detailed conceptual approaches were produced for each element of the proposed Targets model. The eight task reports together describe the important modules proposed for inclusion in the Targets model: input module, energy module, characteristic development moduel, building cost module, analysis control module, energy cost module, search routines module, and economic analysis module. 16 refs., 16 figs., 5 tabs.

  2. Pulsed source ion implantation apparatus and method

    DOEpatents

    Leung, K.N.

    1996-09-24

    A new pulsed plasma-immersion ion-implantation apparatus that implants ions in large irregularly shaped objects to controllable depth without overheating the target, minimizing voltage breakdown, and using a constant electrical bias applied to the target. Instead of pulsing the voltage applied to the target, the plasma source, for example a tungsten filament or a RF antenna, is pulsed. Both electrically conducting and insulating targets can be implanted. 16 figs.

  3. U/sub 3/O/sub 8/ powder from uranyl-loaded cation exchange resin

    SciTech Connect

    Mosley, W.C.

    1985-01-01

    U/sub 3/O/sub 8/ powder has been produced from uranyl-loaded cation exchange resin with density, particle size distribution, and grain size suitable for powder metallurgy fabrication of reactor fuel tubes with Al-U/sub 3/O/sub 8/ cores. Macroporous sulfonate resin in granular form is used in the process. Resin conversion techniques that were evaluated include batch, rotary, and fluidized bed calcination. 2 refs., 16 figs.

  4. Security system signal supervision

    SciTech Connect

    Chritton, M.R. ); Matter, J.C. )

    1991-09-01

    This purpose of this NUREG is to present technical information that should be useful to NRC licensees for understanding and applying line supervision techniques to security communication links. A review of security communication links is followed by detailed discussions of link physical protection and DC/AC static supervision and dynamic supervision techniques. Material is also presented on security for atmospheric transmission and video line supervision. A glossary of security communication line supervision terms is appended. 16 figs.

  5. Hanford internal dosimetry program manual

    SciTech Connect

    Carbaugh, E.H.; Sula, M.J.; Bihl, D.E.; Aldridge, T.L.

    1989-10-01

    This document describes the Hanford Internal Dosimetry program. Program Services include administrating the bioassay monitoring program, evaluating and documenting assessments of internal exposure and dose, ensuring that analytical laboratories conform to requirements, selecting and applying appropriate models and procedures for evaluating internal radionuclide deposition and the resulting dose, and technically guiding and supporting Hanford contractors in matters regarding internal dosimetry. 13 refs., 16 figs., 42 tabs.

  6. Shape memory alloy thaw sensors

    DOEpatents

    Shahinpoor, M.; Martinez, D.R.

    1998-04-07

    A sensor permanently indicates that it has been exposed to temperatures exceeding a critical temperature for a predetermined time period. An element of the sensor made from shape memory alloy changes shape when exposed, even temporarily, to temperatures above the austenitic temperature of the shape memory alloy. The shape change of the SMA element causes the sensor to change between two readily distinguishable states. 16 figs.

  7. Pruning apparatus and method

    DOEpatents

    Dellinger, R.D.

    1997-12-09

    The present invention is an automated pruning apparatus that requires little or no follow-up hand pruning and requires no sensors to avoid supportive trunks or posts. The present invention uses at least one pair of flat, close angled toothed, counter rotating blades. Woody branches are directed to the counter rotating blades first with a lifting arm and secondly by a quilled drum. 16 figs.

  8. Chemical enhancement of surface deposition

    DOEpatents

    Patch, K.D.; Morgan, D.T.

    1997-07-29

    A method and apparatus are disclosed for increasing the deposition of ions onto a surface, such as the adsorption of uranium ions on the detecting surface of a radionuclide detector. The method includes the step of exposing the surface to a complexing agent, such as a phosphate ion solution, which has an affinity for the dissolved species to be deposited on the surface. This provides, for example, enhanced sensitivity of the radionuclide detector. 16 figs.

  9. Load cell

    DOEpatents

    Spletzer, B.L.

    1998-12-15

    A load cell combines the outputs of a plurality of strain gauges to measure components of an applied load. Combination of strain gauge outputs allows measurement of any of six load components without requiring complex machining or mechanical linkages to isolate load components. An example six axis load cell produces six independent analog outputs, each directly proportional to one of the six general load components. 16 figs.

  10. Environmental assessment related to the operation of Argonne National Laboratory, Argonne, Illinois

    SciTech Connect

    Not Available

    1982-08-01

    In order to evaluate the environmental impacts of Argonne National Laboratory (ANL) operations, this assessment includes a descriptive section which is intended to provide sufficient detail to allow the various impacts to be viewed in proper perspective. In particular, details are provided on site characteristics, current programs, characterization of the existing site environment, and in-place environmental monitoring programs. In addition, specific facilities and operations that could conceivably impact the environment are described at length. 77 refs., 16 figs., 47 tabs.

  11. Metallurgical analysis of fractured F-27 aircraft landing gear

    SciTech Connect

    Witherell, C.E.

    1987-12-15

    The Materials Division of LLNL's Chemistry and Materials Science Department was asked to conduct a study of a fractured component of the main (starboard) landing gear on the F-27 aircraft (N768RL). The purpose of the study was to determine from metallurgical evidence the probable failure mode, its cause, and contribution to the recent landing incident at Livermore. 21 refs., 15 figs., 1 tab.

  12. Radiochemistry of astatine

    SciTech Connect

    Ruth, T.J.; Dombsky, M.; D'Auria, J.M.; Ward, T.E.

    1988-01-01

    This monograph is a review of the literature through 1987 and covers the methods of producing the radioisotopes of astatine and the inorganic, nuclear, and organic chemistry of astatine. The discussion is limited to chemical and physical chemical properties of astatine. The monograph, after the introduction, is divided into chapters titled: production methods, nuclear spectroscopy, chemistry of astatine, separation and isolation (dry and wet), and selected procedures. 209 refs., 15 figs., 7 tabs. (DLC)

  13. Chaotic dynamics of loosely supported tubes in crossflow

    SciTech Connect

    Cai, Y.; Chen, S.S.

    1991-07-01

    By means of the unsteady-flow theory and a bilinear mathematical model, a theoretical study was conducted of the chaotic dynamics associated with the fluidelastic instability of loosely supported tubes. Calculations were performed for the RMS of tube displacement, bifurcation diagram, phase portrait, power spectral density, and Poincare map. Analytical results show the existence of chaotic, quasiperiodic, and periodic regions when flow velocity exceeds a threshold value. 38 refs., 15 figs., 2 tabs.

  14. Channel plate for DNA sequencing

    DOEpatents

    Douthart, R.J.; Crowell, S.L.

    1998-01-13

    This invention is a channel plate that facilitates data compaction in DNA sequencing. The channel plate has a length, a width and a thickness, and further has a plurality of channels that are parallel. Each channel has a depth partially through the thickness of the channel plate. Additionally an interface edge permits electrical communication across an interface through a buffer to a deposition membrane surface. 15 figs.

  15. Method and means for a spatial and temporal probe for laser-generated plumes based on density gradients

    DOEpatents

    Yeung, E.S.; Chen, G.

    1990-05-01

    A method and means are disclosed for a spatial and temporal probe for laser generated plumes based on density gradients includes generation of a plume of vaporized material from a surface by an energy source. The probe laser beam is positioned so that the plume passes through the probe laser beam. Movement of the probe laser beam caused by refraction from the density gradient of the plume is monitored. Spatial and temporal information, correlated to one another, is then derived. 15 figs.

  16. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site

    SciTech Connect

    Scott, D.E.; Pechmann, J.H.K.; Knox, J.N.; Estes, R.A.; McGregor, J.H.; Bailey, K.

    1988-12-01

    The Savannah River Ecology Laboratory has completed 10 years of ecological studies related to the construction of the Defense Waste Processing Facility (DWPF) on the Savannah River Site. This progress report examines water quality studies on streams peripheral to the DWPF construction site and examines the effectiveness of refuge ponds'' in ameliorating the effects of construction on local amphibians. Individual papers on these topics are indexed separately. 93 refs., 15 figs., 15 tabs. (MHB)

  17. Mechanisms By Which Humidity Alters Ductility.

    DTIC Science & Technology

    1980-08-01

    ductility$ of thesurfa ?Za’dlouvalt1 -rates of crack initiation, early growth and the relaxation op residual surface stresses dur~fati gue are all sensitive...15 Fig. 4 Ratio of closure stress to maximum tensile stress increases with increased distance (L) of crack tip to the next grain boundary. Here...orientations. Tmax is the maximum applied surface shear stress ........................ 23 Fiq. 8 Duration of incubation AN = N - N increases for cracks

  18. Tests of quantum chromodynamics in exclusive e sup + e sup minus and. gamma. gamma. processes

    SciTech Connect

    Brodsky, S.J.

    1989-09-01

    This paper discusses the following topics: Factorization theorem for exclusive processes; Electromagnetic form factors of baryons; Suppression of final state interactions; The {gamma}{pi}{sub 0} Transition form factor; Exclusive charmonium decays; The {pi}-{rho} puzzle; Time-like compton processes; Multi-hadron production; Heavy Quark exclusive states and form factor zeros in QCD; Exclusive {gamma}{gamma} reactions; Higher twist effects; and Tauonium and threshold {tau}{sup +}{tau}{sup {minus}} production. 41 refs., 15 figs. (LSP)

  19. High performance H modes in JET

    SciTech Connect

    Tanga, A.

    1990-01-01

    In JET the scientific properties and technical basis of good confinement regimes have been evaluated in the light of the potential extrapolation of such regimes to reactor requirements. In this paper the main experimental H-mode results are discussed highlighting global confinement scaling, low q regimes, the role of the target plate material, the density limit, and finally sawtooth suppression and hot-ion mode. 17 refs., 15 figs.

  20. Application of microwave energy for in-drum solidification of simulated precipitation sludge

    SciTech Connect

    Petersen, R.D.; Johnson, A.J.; Swanson, S.D.; Thomas, R.L.

    1987-08-17

    The application of microwave energy for in-container solidification of simulated transuranic contaminated precipitation sludges has been tested. Results indicate volume reductions to 83% are achievable by the continuous feeding of pre-dried sludge into a waste container while applying microwave energy. An economic evaluation was completed showing achievable volume and weight reductions to 87% compared with a current immobilization process for wet sludge. 7 refs., 15 figs., 16 tabs.

  1. Physical properties of contaminated trichloroethylene and 1,1,1- trichloroethane

    SciTech Connect

    Holt, R.D.

    1990-10-01

    The specific gravity, volume change, dielectric constant, dissipation factor, boiling point, and nonvolatile residue carryover during distillation was measured for various contamination levels of rosin in trichloroethylene and 1,1,1-trichloroethane. Solvent stabilizers and the vapor pressure of solvents were examined. The effects of unknown contamination in solvents from manufacturing departments were measured. The theoretical effects of oil contamination on the boiling point are discussed. 18 refs., 15 figs., 13 tabs.

  2. Numerical modeling of a large deformation thermoforming process

    SciTech Connect

    Schrank, M.G.

    1988-04-01

    A numerical solution, using finite element methods, is presented for the simulation of a blow-molding process used to form a thermoplastic polymer (polyethylene terephthalate). The constitutive relationship employed in the analysis is a modification of the creep power law, allowing both strain hardening and strain rate hardening of the material. Analytical results compare well with experimental data for both rate of deformation during the forming process and strain distribution in the final formed configuration. 15 figs.

  3. Exponential-time constitutive law for Palo Duro Unit 4 Salt from the J. Friemel No. 1 Well

    SciTech Connect

    Senseny, P.E.; Pfeifle, T.W.; Mellegard, K.D.

    1986-07-01

    Values for the nine parameters in the exponential-time constitutive law are presented for Palo Duro Unit 4 salt. The values given for the thermal expansion and two elastic parameters are taken from previous laboratory studies. The six remaining constitutive parameters are evaluated by analyzing data from 12 triaxial compression creep tests. The specimens tested in this study are from the J. Friemel No. 1 well in Deaf County, Texas. 15 refs., 15 figs., 4 tabs.

  4. Pursuit of X-ray Vision for Augmented Reality

    DTIC Science & Technology

    2012-01-01

    are monocular; they apply to a single eye. Two cues are binocular; they require two eyes to be applied to a scene or a visual system. Fig. 1 shows...completely lost with AR displays. Hand-held displays force the user to converge on a single display surface; thus any information about distance is to the...system for laparoscopic visualization [14].) Or such a Pursuit of “X-ray Vision” 17 Fig. 3 The virtual hole metaphor in the AR system for laparoscopic

  5. Geology of the Southeast Durham and Southwest Durham 7. 5-minute Quadrangles, North Carolina

    SciTech Connect

    Hoffman, C.W.; Gallagher, P.E.

    1989-01-01

    The Southeast Durham and Southwest Durham 7.5-minute Quadrangles include a 26 kilometer transect of the Durham Triassic basin from the Jonesboro fault on the southeastern side of this half-graben structure to a bounding unconformity on the northwestern side. The basin is filled with non-marine, primarily fluvial, clastic deposits of the Late Triassic Chatham Group. The Chatham Group rocks are intruded by Early Jurassic diabase as dikes and sheets. Bordering rocks are pre-Mesozoic intrusive, metavolcanic and metasedimentary rocks of the Carolina slate belt. This paper discusses the geology of the Southeast Durham and Southwest Durham Quadrangles. 37 refs., 17 figs.

  6. Magnetic force microscopy method and apparatus to detect and image currents in integrated circuits

    DOEpatents

    Campbell, A.N.; Anderson, R.E.; Cole, E.I. Jr.

    1995-11-07

    A magnetic force microscopy method and improved magnetic tip for detecting and quantifying internal magnetic fields resulting from current of integrated circuits are disclosed. Detection of the current is used for failure analysis, design verification, and model validation. The interaction of the current on the integrated chip with a magnetic field can be detected using a cantilevered magnetic tip. Enhanced sensitivity for both ac and dc current and voltage detection is achieved with voltage by an ac coupling or a heterodyne technique. The techniques can be used to extract information from analog circuits. 17 figs.

  7. Phase 1 report on sensor technology, data fusion and data interpretation for site characterization

    SciTech Connect

    Beckerman, M.

    1991-10-01

    In this report we discuss sensor technology, data fusion and data interpretation approaches of possible maximal usefulness for subsurface imaging and characterization of land-fill waste sites. Two sensor technologies, terrain conductivity using electromagnetic induction and ground penetrating radar, are described and the literature on the subject is reviewed. We identify the maximum entropy stochastic method as one providing a rigorously justifiable framework for fusing the sensor data, briefly summarize work done by us in this area, and examine some of the outstanding issues with regard to data fusion and interpretation. 25 refs., 17 figs.

  8. N Reactor core heatup sensitivity study for the 32-inch unit cell model

    SciTech Connect

    Martin, F.; Zimmerman, B.; Heard, F.

    1988-02-01

    A number of N Reactor core heatup studies have been performed using the TRUMP-BD computer code. These studies were performed to address questions concerning the dependency of results on potential variations in the material properties and/or modeling assumptions. This report described and documents a series of 31 TRUMP-BD runs that were performed to determine the sensitivity of calculated inner-fuel temperatures to a variety of TRUMP input parameters and also to a change in the node density in a high-temperature-gradient region. The results of this study are based on the 32-in. model. 18 refs., 17 figs., 2 tab.

  9. Parallel pulse processing and data acquisition for high speed, low error flow cytometry

    DOEpatents

    Engh, G.J. van den; Stokdijk, W.

    1992-09-22

    A digitally synchronized parallel pulse processing and data acquisition system for a flow cytometer has multiple parallel input channels with independent pulse digitization and FIFO storage buffer. A trigger circuit controls the pulse digitization on all channels. After an event has been stored in each FIFO, a bus controller moves the oldest entry from each FIFO buffer onto a common data bus. The trigger circuit generates an ID number for each FIFO entry, which is checked by an error detection circuit. The system has high speed and low error rate. 17 figs.

  10. Deconvolution/identification techniques for 1-D transient signals

    SciTech Connect

    Goodman, D.M.

    1990-10-01

    This paper discusses a variety of nonparametric deconvolution and identification techniques that we have developed for application to 1-D transient signal problems. These methods are time-domain techniques that use direct methods for matrix inversion. Therefore, they are not appropriate for large data'' problems. These techniques involve various regularization methods and permit the use of certain kinds of a priori information in estimating the unknown. These techniques have been implemented in a package using standard FORTRAN that should make the package readily transportable to most computers. This paper is also meant to be an instruction manual for the package. 25 refs., 17 figs., 1 tab.

  11. Enhancement of wall jet transport properties

    DOEpatents

    Claunch, S.D.; Farrington, R.B.

    1997-02-04

    By enhancing the natural instabilities in the boundary layer and in the free shear layer of a wall jet, the boundary is minimized thereby increasing the transport of heat and mass. Enhancing the natural instabilities is accomplished by pulsing the flow of air that creates the wall jet. Such pulsing of the flow of air can be accomplished by sequentially occluding and opening a duct that confines and directs the flow of air, such as by rotating a disk on an axis transverse to the flow of air in the duct. 17 figs.

  12. Scanning tip microwave near field microscope

    DOEpatents

    Xiang, X.D.; Schultz, P.G.; Wei, T.

    1998-10-13

    A microwave near field microscope has a novel microwave probe structure wherein the probing field of evanescent radiation is emitted from a sharpened metal tip instead of an aperture or gap. This sharpened tip, which is electrically and mechanically connected to a central electrode, extends through and beyond an aperture in an end wall of a microwave resonating device such as a microwave cavity resonator or a microwave stripline resonator. Since the field intensity at the tip increases as the tip sharpens, the total energy which is radiated from the tip and absorbed by the sample increases as the tip sharpens. The result is improved spatial resolution without sacrificing sensitivity. 17 figs.

  13. Oak Ridge Reservation Site Management Plan for the Environmental Restoration Program

    SciTech Connect

    Not Available

    1991-09-01

    This site management for the Environmental Restoration (ER) Program implements the Oak Ridge Reservation (ORR) Federal Facility Agreement (FFA) (EPA 1990), also known as an Interagency Agreement (IAG), hereafter referred to as the Agreement.'' The Department of Energy (DOE), the US Environmental Protection Agency (EPA), and the Tennessee Department of Environment and Conservation (TDEC), hereafter known as the Parties,'' entered into this Agreement for the purpose of coordinating remediation activities undertaken on the ORR to comply with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) as amended by the Superfund Amendments, the Resource Conservation and Recovery Act (RCRA), and the National Environmental Policy Act (NEPA). 7 refs., 17 figs.

  14. Spray forming process for producing molds, dies and related tooling

    DOEpatents

    McHugh, K.M.; Key, J.F.

    1998-02-17

    A method is disclosed for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers. 17 figs.

  15. Rf system considerations for a large hadron collider

    SciTech Connect

    Raka, E.

    1988-01-01

    In this paper, we shall discuss how we arrive at a particular choice of voltage and frequency; the type of acceleration structure that would be suitable for obtaining the required voltage and resonant impedance; static beam loading including a simplified beam stability criterion involving the beam current and total rf system shunt impedance; the basic principle of rf phase and frequency control loops; and the effect of rf noise and its interaction with these loops. Finally, we shall consider the need for and design of rf systems to damp independently coherent oscillations of individual bunches or groups of bunches. 30 refs., 17 figs., 2 tabs.

  16. Method for formation of subsurface barriers using viscous colloids

    DOEpatents

    Apps, J.A.; Persoff, P.; Moridis, G.; Pruess, K.

    1998-11-17

    A method is described for formation of subsurface barriers using viscous liquids where a viscous liquid solidifies at a controlled rate after injection into soil and forms impermeable isolation of the material enclosed within the subsurface barriers. The viscous liquid is selected from the group consisting of polybutenes, polysiloxanes, colloidal silica and modified colloidal silica of which solidification is controlled by gelling, cooling or cross-linking. Solidification timing is controlled by dilution, addition of brines, coating with alumina, stabilization with various agents and by temperature. 17 figs.

  17. Crystalline mesoporous zirconia catalysts having stable tetragonal pore wall structure

    DOEpatents

    Sachtler, W.M.H.; Huang, Y.Y.

    1998-07-28

    Methods are disclosed for the preparation of new sulfated mesoporous zirconia materials/catalysts with crystalline pore walls of predominantly tetragonal crystal structure, characterized by nitrogen physical sorption measurement, X-ray diffraction, transmission electron microscopy and catalytic tests using n-butane isomerization to iso-butane and alkylation of 1-naphthol with 4-tert-butylstyrene as probe reactions. Sulfate deposition is preferred for the transformation of a mesoporous precursor with amorphous pore walls into a material with crystalline pore walls maintaining the mesoporous characteristics. 17 figs.

  18. Developing a Zebrafish Model of NF1 for Structure-Function Analysis and Identification of Modifier Genes

    DTIC Science & Technology

    2010-04-01

    YYYY) 01-04-2010 2. REPORT TYPE Annual 3 . DATES COVERED (From - To) 1 APR 2009 - 31 MAR 2010 4. TITLE AND SUBTITLE Developing a Zebrafish Model...containing 1 (WSB1), Kinase suppressor of Ras 1 (KSR1), and Galectin -9 (LGALS9) while A kinase anchor protein 1 (AKAP1) and RNA-binding protein...of the head and anterior central nervous system (Fig 3A1-7, B1-7, Fig S2C1-C7, D1-D7). Notably, at 48 hours post fertilization (hpf) and 3 dpf both

  19. Theory and modeling of a relativistic klystron amplifier with high space charge for microsecond applications

    SciTech Connect

    Carlsten, B.E.; Fazio, M.V.; Faehl, R.J.; Kwan, T.J.; Rickel, D.G.; Stringfield, R.M.

    1992-01-01

    We discuss basic Relativistic Klystron Amplifier physics. We show that in the intense space-charge regime the maximum power extraction does not coincide with the maximum harmonic bunching. In addition, we show that as the beam is bunched, the additional power stored in the Coulomb fields does not add significantly to the overall power extraction. Because of these effects, the power extraction at 1.3 GHz for a 500 kV, 5 kA beam with reasonable beam-to-wall spacing is limited to around 35%. 3 refs., 17 figs.

  20. Evaluation of the self-calibrating thermocouple as a front end to a smart temperature measurement system

    SciTech Connect

    Ruppel, F.R.

    1991-01-01

    An evaluation of the novel self-calibrating thermocouple was performed to determine whether the sensor would be acceptable as a front end to a smart temperature measurement system. The evaluation consisted of a fast-ramp test, long-term drift tests, and physical examinations including X rays, microphotography, and energy-dispersive spectrometry. The results of the tests show that the sensor is a viable industrial-grade device worthy for use in this application. However, recommendations for improving fabrication of the assembly are made and caveats are given for conditions that may constrain the use of the sensor in certain situations. 4 refs., 17 figs., 1 tab.

  1. Comparisons of the structure, stability and electron distribution of nitrobenzenes and nitro-sym-triazines

    SciTech Connect

    Ritchie, J.P.

    1986-01-01

    Nitrobenzenes are a well known class of stable organic compounds. Nitro-sym-triazines are not known, although other substituted triazines are very well known. To investigate what properties the nitrotriazines might have, should they be synthesized, we performed molecular orbital calculations for nitrotriazine (NTZ), dinitrotriazine (DNTZ), and trinitrotriazine (TNTZ). Nitrobenzenes with analogous nitrogroup substitution were also studied to provide a check on the calculations. In particular, nitrobenzene (NB), 1,3-dinitrobenzene (DNB), and 1,3,5-trinitrobenzene (TNB) were studied. 17 figs., 5 tabs.

  2. Survey of the response of standard limited streamer tubes over the complete range of three-component gas mixtures of isobutane, CO/sub 2/, argon

    SciTech Connect

    Calcaterra, A.; De Sangro, R.; De Simone, P.; Burrows, P.; Cartwright, S.L.; Gonzalez, S.; Lath, A.; Schneekloth, U.; Williams, D.C.; Yamartino, J.M.

    1989-07-01

    We present the results of a systematic study of three-component gas mixtures containing argon, isobutane, and carbon dioxide. The study used production-type chambers from the SLD Warm Iron Calorimeter (WIC), instrumented with standard pleastic streamert tubes, and triggered by cosmic-ray muons. Pulse height spectra are presented as a function of high voltage, over a wide range of mixtures of these three gases. Various features and similarities observed throughout this three-dimensional mixture space are important clues to understanding the underlying physics of discharge mechanisms in wire detectors. 15 refs., 17 figs.

  3. A method for pressure-pulse suppression in fluid-filled piping

    SciTech Connect

    Shin, Y.W.; Bielick, E.F. ); Wiedermann, A.H. ); Ockert, C.E. )

    1989-01-01

    A simple, nondestructive method to suppress pressure pulses in fluid-filled piping was proposed and theoretically analyzed earlier. In this paper, the proposed method is verified experimentally. The results of experiments performed for the range of parameters of practical importance indicated that the attenuation of pressure pulses was in accordance with the theoretical predictions. This paper describes the experimental setup and the test models of the proposed pulse suppression devices and discusses the experimental results. In particular, the measured attenuation factors are presented and compared with the theoretical predictions. 8 ref., 17 fig., 2 tab.

  4. Thermal tests of MC3811 rigid/flex printed wiring boards

    SciTech Connect

    Gentry, F.L.

    1990-10-01

    Rigid/flex multilayer printed wiring boards are more sensitive to thermal environmental changes than conventional printed wiring boards. This is manifested because of a composition of dissimilar materials used within the construction of this type of product. During fabrication and assembly, stresses can develop within the plated-through holes from differences in thermal properties of the rigid and flexible materials, primarily thermal coefficient of expansion. Thermal shock and thermal stress tests and rework simulation as defined in MIL-P-50884 have been performed in this study as indicators of processing quality to detect faults and to verify improvements in board reliability. 3 refs., 17 figs., 3 tabs.

  5. Dual stage active magnetic regenerator and method

    DOEpatents

    Pecharsky, V.K.; Gschneidner, K.A. Jr.

    1999-03-30

    A dual stage active magnetic regenerator refrigerator as well as method using the Joule-Brayton thermodynamic cycle includes a high temperature stage refrigerant comprising DyAl{sub 2} or (Dy{sub 1{minus}x}Er{sub x})Al{sub 2} where x is selected to be greater than 0 and less than about 0.3 in combination with a low temperature stage comprising (Dy{sub 1{minus}x}Er{sub x})Al{sub 2} where x is selected to be greater than about 0.5 and less than 1 to provide significantly improved refrigeration efficiency in the liquefaction of gaseous hydrogen. 17 figs.

  6. Experimental studies of actinides in molten salts

    SciTech Connect

    Reavis, J.G.

    1985-06-01

    This review stresses techniques used in studies of molten salts containing multigram amounts of actinides exhibiting intense alpha activity but little or no penetrating gamma radiation. The preponderance of studies have used halides because oxygen-containing actinide compounds (other than oxides) are generally unstable at high temperatures. Topics discussed here include special enclosures, materials problems, preparation and purification of actinide elements and compounds, and measurements of various properties of the molten volts. Property measurements discussed are phase relationships, vapor pressure, density, viscosity, absorption spectra, electromotive force, and conductance. 188 refs., 17 figs., 6 tabs.

  7. Hydrogeologic testing plan for Deep Hydronest Test Wells, Deaf Smith County site, Texas

    SciTech Connect

    Not Available

    1987-12-01

    This report discusses methods of hydraulic testing which are recommended for use in the Deep Hydronest Test Wells at the proposed high level nuclear waste repository site in Deaf Smith County, Texas. The deep hydronest wells are intended to provide geologic, geophysical and hydrologic information on the interval from the Upper San Andres Formation to the base of the Pennsylvanian system at the site. Following the period of drilling and testing, the wells will be converted into permanent monitoring installations through which fluid pressures and water quality can be monitored at various depths in the section. 19 refs., 17 figs., 2 tabs.

  8. Design approaches and parameters for magnetically levitated transport systems. [Null flux suspension (Maglev)

    SciTech Connect

    Danby, G.T.; Powell, J.R.

    1988-01-01

    Mechanically levitated transport system approaches are assessed with regard to thrust power needs, track cost, suspension stability, and safety. The null flux suspension appears as the favored approach, having the least thrust power requirements, highest stability, and lowest amount of track material. Various null flux configurations are described together with their operating parameters. The Linear Synchronous Motor (LSM) propulsion system is also described for propelling the suspended vehicles. Cryogenics and superconductivity aspects are discussed and the effect of high T/sub c/ superconductors evaluated. 13 refs., 16 figs., 2 tabs.

  9. Magnetic field quality analysis using ANSYS

    SciTech Connect

    Dell'Orco, D.; Chen, Y.

    1991-03-01

    The design of superconducting magnets for particles accelerators requires a high quality of the magnetic field. This paper presents an ANSYS 4.4A Post 1 macro that computes the field quality performing a Fourier analysis of the magnetic field. The results show that the ANSYS solution converges toward the analytical solution and that the error on the multipole coefficients depends linearly on the square of the mesh size. This shows the good accuracy of ANSYS in computing the multipole coefficients. 2 refs., 16 figs., 4 tabs.

  10. Structural performance of the DOE's Idaho National Engineering Laboratory during the 1983 Borak Peak earthquake

    SciTech Connect

    Guenzler, R.C.; Gorman, V.W.

    1985-01-01

    The 1983 Borah Peak Earthquake (7.3 Richter magnitude) was the largest earthquake ever experienced by the DOE's Idaho National Engineering Laboratory (INEL). Reactor and plant facilities are generally located about 90 to 110 km (60 miles) from the epicenter. Several reactors were operating normally at the time of the earthquake. Based on detailed inspections, comparisons of measured accelerations with design levels, and instrumental seismograph information, it was concluded that the 1983 Borah Peak Earthquake created no safety problems for INEL reactors or other facilities. 10 refs., 16 figs., 2 tabs.

  11. Self-Assembled Mercaptan on Mesoporous Silica (SAMMS) technology of mercury removal and stabilization

    SciTech Connect

    Feng, Xiangdong; Liu, Jun; Fryxell, G.E.

    1997-09-01

    This paper explains the technology developed to produce Self-Assembled Mercaptan on Mesoporous Silica (SAMMS) for mercury removal from aqueous wastewater and from organic wastes. The characteristics of SAMMS materials, including physical characteristics and mercury loading, and its application for mercury removal and stabilization are discussed. Binding kinetics and binding speciations are reported. Preliminary cost estimates are provided for producing SAMMS materials and for mercury removal from wastewater. The characteristics of SAMMS in mercury separation were studied at PNNL using simulated aqueous tank wastes and actual tritiated pump oil wastes from Savannah River Site; preliminary results are outlined. 47 refs., 16 figs., 16 tabs.

  12. Process for producing phenolic compounds from lignins

    SciTech Connect

    Agblevor, F.A.

    1998-09-15

    A process is described for the production of low molecular weight phenolic compounds from lignins through the pyrolysis of the lignins in the presence of a strong base. In a preferred embodiment, potassium hydroxide is present in an amount of from about 0.1% to about 5% by weight, the pyrolysis temperature is from about 400 C to about 600 C at atmospheric pressure, and the time period for substantial completion of the reaction is from about 1--3 minutes. Examples of low molecular weight phenolic compounds produced include methoxyphenols, non-methoxylated phenols, and mixtures thereof. 16 figs.

  13. Ultra-wideband receiver

    DOEpatents

    McEwan, T.E.

    1994-09-06

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, [+-] UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals. 16 figs.

  14. Molten carbonate fuel cell networks: Principles, analysis, and performance. Technical note

    SciTech Connect

    Wimer, J.G.; Williams, M.C.

    1993-01-01

    The chemical reactions in an internally reforming molten carbonate fuel cell (IRMCFC) are described and combined into the overall IRMCFC reaction. Thermodynamic and electrochemical principles are discussed, and structure and operation of fuel cell stacks are explained. In networking, multiple fuel cell stacks are arranged so that reactant streams are fed and recycled through stacks in series, for higher reactant utilization and increased system efficiency. Advantages and performance of networked and conventional systems are compared, using ASPEN simulations. The concept of networking can be applied to any electrochemical membrane, such as that developed for hot gas cleanup in future power plants. 2 tabs, 16 figs, 9 refs.

  15. Parasitic oscillation suppression in solid state lasers using absorbing thin films

    DOEpatents

    Zapata, L.E.

    1994-08-02

    A thin absorbing film is bonded onto at least certain surfaces of a solid state laser gain medium. An absorbing metal-dielectric multilayer film is optimized for a broad range of incidence angles, and is resistant to the corrosive/erosive effects of a coolant such as water, used in the forced convection cooling of the film. Parasitic oscillations hamper the operation of solid state lasers by causing the decay of stored energy to amplified rays trapped within the gain medium by total and partial internal reflections off the gain medium facets. Zigzag lasers intended for high average power operation require the ASE absorber. 16 figs.

  16. A manual for implementing residual radioactive material guidelines

    SciTech Connect

    Gilbert, T.L.; Yu, C.; Yuan, Y.C.; Zielen, A.J.; Jusko, M.J.; Wallo, A. III

    1989-06-01

    This manual presents information for implementing US Department of Energy (DOE) guidelines for residual radioactive material at sites identified by the Formerly Utilized Sites Remedial Action Program (FUSRAP) and the Surplus Facilities Management Program (SFMP). It describes the analysis and models used to derive site-specific guidelines for allowable residual concentrations of radionuclides in soil and the design and use of the RESRAD computer code for calculating guideline values. It also describes procedures for implementing DOE policy for reducing residual radioactivity to levels that are as low as reasonably achievable. 36 refs., 16 figs, 22 tabs.

  17. Photoinduced charge separation by polymer-bound chromophores

    SciTech Connect

    Rodgers, M.A.J.

    1991-09-01

    This project has examined the photodynamic behavior of water-soluble polymers that have covalently linked hydrophobic chromophores spaced along the chains. These polymeric systems have been examined for photoinduced charge separation with electron-accepting ions having different total charge. Focus has been on the excited singlet (S{sub 1}) state formed by laser flash absorption. The effects of pH and ionic strength -- factors that govern the conformational nature of the polymer in solution -- have been studied. A second major effort has been to study photoinduced redox processes involving excited states of water-soluble variants of anthracene and acridine. 27 refs., 16 figs., 2 tabs.

  18. Petroleum supply annual 1998: Volume 1

    SciTech Connect

    1999-06-01

    The ``Petroleum Supply Annual`` (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1998 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1998, and replaces data previously published in the PSA. The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. 16 figs., 59 tabs.

  19. Petroleum supply annual, 1997. Volume 1

    SciTech Connect

    1998-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1997 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1997, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. 16 figs., 48 tabs.

  20. Petroleum supply monthly with data for June 1997

    SciTech Connect

    1997-08-01

    Data presented in this publication describe the supply and disposition of petroleum products in the United states and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the U.S. The report includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Both summary and detailed statistics are presented. 16 figs., 56 tabs.

  1. Electric sales and revenue 1997

    SciTech Connect

    1998-10-01

    The Electric Sales and Revenue is prepared by the Electric Power Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the US. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1997. 16 figs., 17 tabs.

  2. Towards the Truly Predictive 3D Modeling of Recrystallization and Grain Growth in Advanced Technical Alloys

    DTIC Science & Technology

    2010-06-11

    estimation are shown by deep blue color. PAGE 16 Fig.1.8. (a) Grain shape approximated with the Dodecahedron and (b) estimation of GB volume part...r w hi ch G B I c an b e es tim at ed , % Grain size, MU a) b) Fig.1.8. (a) Grain shape approximated with the Dodecahedron and (b...estimation of GB volume part for which GBI can be derived. Excluded part of GB estimated by taking the Dodecahedron as the grain shape approximation and

  3. Electrochemically stable electrolytes

    DOEpatents

    Angell, C.A.; Zhang, S.S.; Xu, K.

    1999-01-05

    This invention relates generally to inorganic ionic liquids which function as electrolytes and do not crystallize at ambient temperature. More specifically, this invention is directed to quasi-salt inorganic ionic liquids which comprise the reaction product of a strong Lewis acid with an inorganic halide-donating molecule. This invention is further directed to quasi-salt inorganic ionic liquid mixtures which comprise combinations of electrolyte additives and quasi-salt inorganic ionic liquids. These quasi-salt inorganic ionic liquid mixtures are useful electrolytes. 16 figs.

  4. Electrocatalytic cermet sensor

    DOEpatents

    Shoemaker, E.L.; Vogt, M.C.

    1998-06-30

    A sensor is described for O{sub 2} and CO{sub 2} gases. The gas sensor includes a plurality of layers driven by a cyclic voltage to generate a unique plot characteristic of the gas in contact with the sensor. The plurality of layers includes an alumina substrate, a reference electrode source of anions, a lower electrical reference electrode of Pt coupled to the reference source of anions, a solid electrolyte containing tungsten and coupled to the lower reference electrode, a buffer layer for preventing flow of Pt ions into the solid electrolyte and an upper catalytically active Pt electrode coupled to the buffer layer. 16 figs.

  5. Improvement of performance and emissions of a compression ignition methanol engine with dimethyl ether

    SciTech Connect

    Guo, J.; Chikahisa, Takemi; Murayama, Tadashi; Miyano, Masaharu

    1994-10-01

    Dimethyl ether (DME) has very good compression ignition characteristics and can be converted from methanol using a {gamma}-alumina catalyst. In this study a torch ignition chamber (TIC) head with TIC close to the center of the main combustion chamber was designed for the TIC method. The possibility of improvements in reducing the quantities of DME and emission were investigated by optimizing the TIC position, methanol injection timing, DME injection timing, and intake and exhaust throttling. It was found that the necessary amount of DME was greatly reduced when optimizing methanol and DME injection timings. 2 refs., 16 figs., 1 tab.

  6. Laboratory testing of TiB/sub 2/-based cathodes for electrolytic production of aluminum

    SciTech Connect

    Schilling, C.H.

    1988-07-01

    Experimental research was performed to evaluate TiB/sub 2/-based cathodes, which may be used for retrofitting existing commercial Hall-Heroult cells. Candidate cathode materials and retrofit designs were analyzed in laboratory-scale electrolysis tests and nonpolarized immersion tests in molten Al. The cathode materials and cathode attachment designs were selected based on a literature review (Schilling, Hagen, and Hart 1987) and previous experimental research at the Pacific Northwest Laboratory (Hart et al. 1987). 40 refs., 16 figs., 2 tabs.

  7. Optical device with low electrical and thermal resistance Bragg reflectors

    DOEpatents

    Lear, K.L.

    1996-10-22

    A compound-semiconductor optical device and method are disclosed. The optical device is provided with one or more asymmetrically-graded heterojunctions between compound semiconductor layers for forming a distributed Bragg reflector mirror having an improved electrical and thermal resistance. Efficient light-emitting devices such as light-emitting diodes, resonant-cavity light-emitting diodes, and vertical-cavity surface-emitting lasers may be formed according to the present invention, which may be applied to the formation of resonant-cavity photodetectors. 16 figs.

  8. The GALLEX Project

    SciTech Connect

    Kirsten, T. )

    1989-01-01

    The GALLEX collaboration aims at the detection of solar neutrinos in a radiochemical experiment employing 30 tons of Gallium in form of concentrated aqueous Gallium-chloride solution. The detector is primarily sensitive to the otherwise inaccessible pp-neutrinos. Details of the experiment have been repeatedly described before. Here we report the present status of implementation in the Laboratori Nazionali del Gran Sasso (Italy). So far, 12.2 tons of Gallium are at hand. The present status of development allows to start the first full scale run at the time when 30 tons of Gallium become available. This date is expected to be January, 1990. 17 refs., 16 figs.

  9. Numerical modeling of HF skywave radiation from antennas in irregular terrain

    SciTech Connect

    Burke, G.J.

    1990-11-01

    The problem of computing the radiation pattern of an HF antenna sited in irregular terrain was investigated. The primary interest is in antennas for skywave communication, however ionospheric models were not considered. Several methods for modeling terrain effects are briefly reviewed. A geometrical optics model for arbitrary terrain is developed and results are compared with published results from solution of a Volterra integral equation for scattering by a Gaussian ridge. This report covers work on the first phase of a project for the US Navy to develop and apply models for terrain effects in HF communications involving skywave. 45 refs., 16 figs.

  10. Commercial scale demonstration enhanced oil recovery by micellar-polymer flood. Technical progress report

    SciTech Connect

    Mueller, L.M.

    1985-10-01

    This report describes work conducted on the Maraflood oil recovery process, M-1 Project, throughout the month of October, 1985. Information is presented under two Work Breakdown Structure (WBS) elements: WBS 2100 - Fluid Injection and WBS 2300 - Performance Monitoring. Fluid Injection reporting consists of a short discussion concerning injection wells recently stimulated in the 5.0-acre pattern area and the reason for this area's sudden injection rate increase. Performance Monitoring reporting includes a discussion of the 2.5-acre and 5.0-acre pattern oil cut performance for October, 1985. 16 figs.

  11. Research and development of a helium-4 based solar neutrino detector. Progress report, November 1, 1991--April 30, 1993

    SciTech Connect

    Lanou, R.E.; Maris, H.J.; Seidel, G.M.

    1993-05-01

    Superfluid helium possesses unique properties that enable it to be used as the major component of a very sensitive calorimetric detector: it is extremely pure, and the energy deposited in it is carried out by elementary excitations of the liquid which can produce quantum evaporation of He atoms at a free surface. It has a major advantage of being able to achieve very low background levels. Experimental results presented on the development of helium-4 detector include sensitivity, heat capacity of wafer-calorimeters, coincidence measurements, spectrum of alpha particles in helium, and quantum evaporation: angular dependence and efficiency. 29 refs., 16 figs., 1 tab.

  12. Method for the thermal characterization, visualization, and integrity evaluation of conducting material samples or complex structures

    DOEpatents

    Ortiz, M.G.

    1992-11-24

    Disclosed is a method for modeling a conducting material sample or structure (herein called a system) as at least two regions which comprise an electrical network of resistances, for measuring electric resistance between at least two selected pairs of external leads attached to the surface of the system, wherein at least one external lead is attached to the surface of each of the regions, and, using basic circuit theory, for translating measured resistances into temperatures or thermophysical properties in corresponding regions of the system. 16 figs.

  13. Computer control of fuel handling activities at FFTF

    SciTech Connect

    Romrell, D.M.

    1985-03-01

    The Fast Flux Test Facility near Richland, Washington, utilizes computer control for reactor refueling and other related core component handling and processing tasks. The computer controlled tasks described in this paper include core component transfers within the reactor vessel, core component transfers into and out of the reactor vessel, remote duct measurements of irradiated core components, remote duct cutting, and finally, transferring irradiated components out of the reactor containment building for off-site shipments or to long term storage. 3 refs., 16 figs.

  14. Motor monitoring method and apparatus using high frequency current components

    DOEpatents

    Casada, D.A.

    1996-05-21

    A motor current analysis method and apparatus for monitoring electrical-motor-driven devices are disclosed. The method and apparatus utilize high frequency portions of the motor current spectra to evaluate the condition of the electric motor and the device driven by the electric motor. The motor current signal produced as a result of an electric motor is monitored and the low frequency components of the signal are removed by a high-pass filter. The signal is then analyzed to determine the condition of the electrical motor and the driven device. 16 figs.

  15. New O(6) region near A = 130 and the interplay of triaxiality and gamma-softness in the IBA

    SciTech Connect

    Casten, R.F.

    1984-01-01

    A simple approach to the IBA is described, which exploits the consistent Q-formalism to describe both symmetries and transition regions with a minimum of parameters. Some results with this approach are discussed and compared with the data for deformed and transitional nuclei. Following this introduction, a new region of O(6) symmetry is presented and compared with the Pt region with which it is found to share many similarities. Discrepancies with the strict limiting symmetry are described in terms of symmetry breaking via a small triaxial potential. 28 refs., 15 figs.

  16. High performance electrolytes for MCFC

    DOEpatents

    Kaun, T.D.; Roche, M.F.

    1999-08-24

    A carbonate electrolyte of the Li/Na or CaBaLiNa system is described. The Li/Na carbonate has a composition displaced from the eutectic composition to diminish segregation effects in a molten carbonate fuel cell. The CaBaLiNa system includes relatively small amounts of Ca{sub 2}CO{sub 3} and BaCO{sub 3}, and preferably of equimolar amounts. The presence of both Ca and BaCO{sub 3} enables lower temperature fuel cell operation. 15 figs.

  17. Heat flow and geothermal studies in the state of Washington

    SciTech Connect

    Blackwell, D.D.; Steele, J.L.; Kelley, S.A.

    1985-08-01

    Existing geothermal gradient and heat flow data for the state of Washington are summarized. In addition, information on mean-annual ground surface temperatures is included. The data consist of accurate, detailed temperature-depth measurements in selected available holes throughout the state of Washington made between 1979 and 1982. Measurements of thermal conductivity on selected rock samples from these drill holes and ancillary information required to assess the significance of the data and calculate heat flow values were obtained as well. Information is presented on the mean-annual ground-surface temperatures throughout the state of Washington. 32 refs., 15 figs., 4 tabs.

  18. A CP violation and rare kaon decay experiment at Fermilab

    SciTech Connect

    Yamanaka, Taku

    1989-02-01

    The E731 collaboration at Fermilab has collected enough K ..-->.. 2..pi.. events to give a statistical error of approx.0.5 /times/ 10/sup /minus/3/ on the CP violation parameter epsilon'/epsilon. Improvements have been made to reduce the systematic error. The experiment is also sensitive to many rare decays, and it set a new limit on the branching ratio of K/sub L/ ..-->.. ..pi../sup 0/e/sup +/e/sup /minus//, < 4.2 /times/ 10/sup /minus/8/ (90% CL). 10 refs., 15 figs., 1 tab.

  19. Method for the purification of noble gases, nitrogen and hydrogen

    DOEpatents

    Baker, J.D.; Meikrantz, D.H.; Tuggle, D.G.

    1997-09-23

    A method and apparatus are disclosed for the purification and collection of hydrogen isotopes in a flowing inert gaseous mixture containing impurities, wherein metal alloy getters having the capability of sorbing non-hydrogen impurities such as oxygen, carbon dioxide, carbon monoxide, methane, ammonia, nitrogen and water vapor are utilized to purify the gaseous mixture of impurities. After purification hydrogen isotopes may be more efficiently collected. A plurality of parallel process lines utilizing metal getter alloys can be used to provide for the continuous purification and collection of the hydrogen isotopes. 15 figs.

  20. Special Course on V/STOL Aerodynamics

    DTIC Science & Technology

    1984-04-01

    the past, so they will not deal exclusively with the latest tri• phs of science or technology. Since we can afford only a limited number of lecturers...CONCEPTS LIFT ENGINE+*LIFT CRUISE FC TLIF NCELL SE (R SZ"/ LIF VECTOR ED THRUT/RJS VECTDILUTE THETT H EJECTR ALIMENTO W"CLCJE 5-15 FIG. 8 TWO POSTER...114,495; 114,496; and 114,497, 1974. 71. Poisson-Quinton, Ph ., and Christophe, J., "Special Ground Testing Facilities and Testing Techniques for STOL

  1. Linear accelerators for TeV colliders. Revision

    SciTech Connect

    Wilson, P.B.

    1985-10-01

    The basic scaling relations for important linear collider design parameters are introduced. Some of the basic concepts concerning the design of accelerating structures are presented, and breakdown limitations are discussed. Rf power sources are considered. Some of the key concepts of wakefield accelerators are discussed, and some examples of wake fields for typical linac structures are presented. Some general concepts concerning emittance, and the limitations on the emittance that can be obtained from linac guns and damping rings are discussed. 49 refs., 15 figs. (LEW)

  2. Results from heavy-ion bombardments of sup 254 Es

    SciTech Connect

    Hulet, E.K.

    1989-09-26

    We report our experimental work and offer our most recent data on the decay properties for five new isotopes of Md, No, Lr, and for {sup 258m}Md. In addition to these successful experiments, we have also conducted searches for {sup 263}(105), {sup 264}(105), {sup 272}(109), and superheavy elements. Finally, we summarize our conclusions based on what we have learned so far and what we believe are the most critical directions that should now be taken. 19 refs., 15 figs.

  3. Magnetic filter apparatus and method for generating cold plasma in semiconductor processing

    DOEpatents

    Vella, M.C.

    1996-08-13

    Disclosed herein is a system and method for providing a plasma flood having a low electron temperature to a semiconductor target region during an ion implantation process. The plasma generator providing the plasma is coupled to a magnetic filter which allows ions and low energy electrons to pass therethrough while retaining captive the primary or high energy electrons. The ions and low energy electrons form a ``cold plasma`` which is diffused in the region of the process surface while the ion implantation process takes place. 15 figs.

  4. Quality and Behavior of Juvenile Salmonids in the Columbia River Estuary and Nearshore Ocean and Effects of the Ocean Environment on the Survival of Columbia River Juvenile Salmonids, 1989-1994 Technical Report.

    SciTech Connect

    Francis, R.C.; Schiewe, Michael H.; Fisher, J.P.

    1989-05-01

    In response to this limited understanding of the factors responsible for the continuing decline of spring chinook salmon in the Columbia River, this research plan was developed. The overall goal of the proposed research is to investigate and identify relationships among smolt quality (measured in the hatchery and after recovery in the estuary and nearshore ocean), environmental conditions in the estuary and nearshore ocean during smolt migration, and long-term survival (as measured by adult returns to the hatchery of origin and contributions to the recreational, commercial, and tribal fisheries). 16 refs., 15 figs., 3 tabs.

  5. Apparatus and method for identification and recognition of an item with ultrasonic patterns from item subsurface micro-features

    DOEpatents

    Perkins, R.W.; Fuller, J.L.; Doctor, S.R.; Good, M.S.; Heasler, P.G.; Skorpik, J.R.; Hansen, N.H.

    1995-09-26

    The present invention is a means and method for identification and recognition of an item by ultrasonic imaging of material microfeatures and/or macrofeatures within the bulk volume of a material. The invention is based upon ultrasonic interrogation and imaging of material microfeatures within the body of material by accepting only reflected ultrasonic energy from a preselected plane or volume within the material. An initial interrogation produces an identification reference. Subsequent new scans are statistically compared to the identification reference for making a match/non-match decision. 15 figs.

  6. Multiple-electron processes in fast ion-atom collisions

    SciTech Connect

    Schlachter, A.S.

    1989-03-01

    Research in atomic physics at the Lawrence Berkeley Laboratory Super-HILAC and Bevalac accelerators on multiple-electron processes in fast ion-atom collisions is described. Experiments have studied various aspects of the charge-transfer, ionization, and excitation processes. Examples of processes in which electron correlation plays a role are resonant transfer and excitation and Auger-electron emission. Processes in which electron behavior can generally be described as uncorrelated include ionization and charge transfer in high-energy ion-atom collisions. A variety of experiments and results for energies from 1 MeV/u to 420 MeV/u are presented. 20 refs., 15 figs.

  7. Qualitative validation of pollutant transport components of an unsaturated soil zone model (SESOIL)

    SciTech Connect

    Hetrick, D.M.; Travis, C.C.; Leonard, S.K.; Kinerson, R.S.

    1989-03-01

    Model predictions of a revised version of the soil compartment model SESOIL are compared with empirical measurements of pollutant transport in soil. A description of SESOIL is given, and modifications to the model are presented. Comparisons are performed using data from a laboratory soil column study involving six chemicals (dicamba, 2,4-dichlorophenoxyacetic acid, atrazine, diazinon, pentachlorophenol, and lindane) and data from three field studies involving the transport of aldicarb and atrazine. Model performance and limitations are discussed. 32 refs., 15 figs., 7 tabs.

  8. Renewable energy annual 1997. Volume 1

    SciTech Connect

    1998-02-01

    This report presents information on renewable energy consumption, capacity, and electricity generation data, as well as data on US solar thermal and photovoltaic collector manufacturing activities. The renewable energy resources included in the report are: biomass (wood, ethanol, and biodiesel); municipal solid waste; geothermal; wind; and solar (solar thermal and photovoltaic). The first chapter of the report provides an overview of renewable energy use and capability from 1992 through 1996. It contains renewable energy consumption, capacity, and electricity generation data, as well as descriptive text. Chapter 2 presents current (through 1996) information on the US solar energy industry. A glossary of renewable energy terms is also included. 15 figs., 42 tabs.

  9. Progress in The Lost Circulation Technology Development Program

    SciTech Connect

    Glowka, D.A.; Schafer, D.M.; Loeppke, G.E.; Wright, E.K.

    1991-01-01

    Lost circulation is the loss of drilling fluid from the wellbore to fractures or pores in the rock formation. In geothermal drilling, lost circulation is often a serious problem that contributes greatly to the cost of the average geothermal well. The Lost Circulation Technology Development Program is sponsored at Sandia National Laboratories by the US Department of Energy. The goal of the program is to reduce lost circulation costs by 30--50{percent} through the development of mitigation and characterization technology. This paper describes the technical progress made in this program during the period April, 1990--March, 1991. 4 refs., 15 figs., 1 tab.

  10. Experimental determination of the shipboard fire environment for simulated radioactive material packages

    SciTech Connect

    Koski, J.A.; Bobbe, J.G.; Arviso, M.

    1997-03-01

    A series of eight fire tests with simulated radioactive material shipping containers aboard the test ship Mayo Lykes, a break-bulk freighter, is described. The tests simulate three basic types of fires: engine room fires, cargo fires and open pool fires. Detailed results from the tests include temperatures, heat fluxes and air flows measured during the fires. The first examination of the results indicates that shipboard fires are not significantly different from fires encountered in land transport. 13 refs., 15 figs., 11 tabs.

  11. Polarization at SLC

    SciTech Connect

    Swartz, M.L.

    1988-07-01

    The SLAC Linear Collider has been designed to readily accommodate polarized electron beams. Considerable effort has been made to implement a polarized source, a spin rotation system, and a system to monitor the beam polarization. Nearly all major components have been fabricated. At the current time, several source and polarimeter components have been installed. The installation and commissioning of the entire system will take place during available machine shutdown periods as the commissioning of SLC progresses. It is expected that a beam polarization of 45% will be achieved with no loss in luminosity. 13 refs., 15 figs.

  12. Radiation imaging apparatus

    DOEpatents

    Anger, H.O.; Martin, D.C.; Lampton, M.L.

    1983-07-26

    A radiation imaging system using a charge multiplier and a position sensitive anode in the form of periodically arranged sets of interconnected anode regions for detecting the position of the centroid of a charge cloud arriving thereat from the charge multiplier. Various forms of improved position sensitive anodes having single plane electrode connections are disclosed. Various analog and digital signal processing systems are disclosed, including systems which use the fast response of microchannel plates, anodes and preamps to perform scintillation pulse height analysis digitally. 15 figs.

  13. Optimized achromatic phase-matching system and method

    DOEpatents

    Trebino, R.; DeLong, K.; Hayden, C.

    1997-07-15

    An optical system for efficiently directing a large bandwidth light (e.g., a femtosecond laser pulse) onto a nonlinear optical medium includes a plurality of optical elements for directing an input light pulse onto a nonlinear optical medium arranged such that the angle {theta}{sub in} which the light pulse directed onto the nonlinear optical medium is substantially independent of a position x of the light beam entering the optical system. The optical system is also constructed such that the group velocity dispersion of light pulses passing through the system can be tuned to a desired value including negative group velocity dispersion. 15 figs.

  14. Update of national ozone study: Where are we now?

    SciTech Connect

    Mathur, B.

    1996-12-31

    This paper is one of three keynote presentations given at the conference. It addresses the issue of national ozone research in focusing on the regional task force, Ozone Transport Assessment Group (OTAG). The overall objectives of the OTAG initiatives are reported. These include development of a comprehensive regional emissions inventory, selection of research models and protocols, identification of criteria for selecting emissions control strategies, and development of a framework for a NO{sub x} trading system. Findings from preliminary modeling runs and analyses are presented. 15 figs., 15 tabs.

  15. Hydraulically refueled battery employing a packed bed metal particle electrode

    SciTech Connect

    Siu, S.C.; Evans, J.W.

    1998-12-15

    A secondary zinc air cell, or another selected metal air cell, employing a spouted/packed metal particle bed and an air electrode is described. More specifically, two embodiments of a cell, one that is capable of being hydraulically recharged, and a second that is capable of being either hydraulically or electrically recharged. Additionally, each cell includes a sloped bottom portion to cause stirring of the electrolyte/metal particulate slurry when the cell is being hydraulically emptied and refilled during hydraulically recharging of the cell. 15 figs.

  16. Cold cathode vacuum discharge tube

    DOEpatents

    Boettcher, G.E.

    1998-03-10

    A cold cathode vacuum discharge tube, and method for making same, are disclosed with an interior surface of the trigger probe coated with carbon deposited by carbon vapor deposition (CVD) or diamond-like carbon (DLC) deposition. Preferably a solid graphite insert is employed in the probe-cathode structure in place of an aluminum bushing employed in the prior art. The CVD or DLC probe face is laser scribed to allow resistance trimming to match available trigger voltage signals and to reduce electrical aging. 15 figs.

  17. Analysis of radiofrequency discharges in plasma

    DOEpatents

    Kumar, D.; McGlynn, S.P.

    1992-08-04

    Separation of laser optogalvanic signals in plasma into two components: (1) an ionization rate change component, and (2) a photoacoustic mediated component. This separation of components may be performed even when the two components overlap in time, by measuring time-resolved laser optogalvanic signals in an rf discharge plasma as the rf frequency is varied near the electrical resonance peak of the plasma and associated driving/detecting circuits. A novel spectrometer may be constructed to make these measurements. Such a spectrometer would be useful in better understanding and controlling such processes as plasma etching and plasma deposition. 15 figs.

  18. Surfactant loss: Effects of temperature, salinity, and wettability

    SciTech Connect

    Noll, L.A.; Gall, B.L.; Crocker, M.E.; Olsen, D.K.

    1989-05-01

    Adsorption of sodium dodecylsulfate, Triton X-100, decyltrimethylammonium bromide surfactants onto silica gel and Berea sandstone mineral surfaces has been studied as a function of temperature, solution salt concentration, and mineral surface wettability. Adsorption studies using a flow calorimeter were conducted using pure surfactants and minerals. The studies were then extended to the adsorption of one type of commercial surfactant onto both consolidated and crushed Berea sandstone using column techniques. This has allowed the comparison of different methods to evaluate surfactant losses from flowing rather than static surfactant solutions. 20 refs., 15 figs., 37 tabs.

  19. Ultra-wideband radar motion sensor

    DOEpatents

    McEwan, T.E.

    1994-11-01

    A motion sensor is based on ultra-wideband (UWB) radar. UWB radar range is determined by a pulse-echo interval. For motion detection, the sensors operate by staring at a fixed range and then sensing any change in the averaged radar reflectivity at that range. A sampling gate is opened at a fixed delay after the emission of a transmit pulse. The resultant sampling gate output is averaged over repeated pulses. Changes in the averaged sampling gate output represent changes in the radar reflectivity at a particular range, and thus motion. 15 figs.

  20. Application of nonlinear time series models to driven systems

    SciTech Connect

    Hunter, N.F. Jr.

    1990-01-01

    In our laboratory we have been engaged in an effort to model nonlinear systems using time series methods. Our objectives have been, first, to understand how the time series response of a nonlinear system unfolds as a function of the underlying state variables, second, to model the evolution of the state variables, and finally, to predict nonlinear system responses. We hope to address the relationship between model parameters and system parameters in the near future. Control of nonlinear systems based on experimentally derived parameters is also a planned topic of future research. 28 refs., 15 figs., 2 tabs.

  1. Recent results in high E{sub T} jet production

    SciTech Connect

    Lamoureux, J.; CDF Collaboration

    1997-02-01

    We present results on high E{sub T} jet measurements from CDF and D0. First we show the inclusive jet cross section and compare it to NLO QCD predictions. Preliminary CDF measurements of the {Sigma} E{sub T} cross section are also shown. In order to place limits on the amount of quark compositeness the data can tolerate, we show the dijet angular distributions. Finally, we discuss the inclusive jet cross section measurement at {radical}s = 0.63 TeV and tests of scaling. 13 refs., 15 figs.

  2. Technical procedures for implementation of acoustics site studies, Deaf Smith County site, Texas: Environmental Field Program: Preliminary draft

    SciTech Connect

    Not Available

    1987-09-01

    The purpose and scope of the technical procedure for processing data from the tethered meteorological system are covered. Definitions, interfaces, and concurrent data needs are also addressed. This technical procedure describes how to control, organize, verify, and archive tethered meteorological system data. These data will be received at the processing location from the field measurement location and are part of the characterization of the Deaf Smith County Site, Texas for the salt repository program. These measurements will be made in support of the sound propagation study and are a result of environmental data requirements for acoustics. 6 refs., 15 figs., 5 tabs.

  3. Methods for operating parallel computing systems employing sequenced communications

    DOEpatents

    Benner, R.E.; Gustafson, J.L.; Montry, G.R.

    1999-08-10

    A parallel computing system and method are disclosed having improved performance where a program is concurrently run on a plurality of nodes for reducing total processing time, each node having a processor, a memory, and a predetermined number of communication channels connected to the node and independently connected directly to other nodes. The present invention improves performance of the parallel computing system by providing a system which can provide efficient communication between the processors and between the system and input and output devices. A method is also disclosed which can locate defective nodes with the computing system. 15 figs.

  4. Fixed target electroweak and hard scattering physics

    SciTech Connect

    Brock, R. ); Brown, C.N.; Montgomery, H.E. ); Corcoran, M.D. )

    1990-02-01

    The possibilities for future physics and experiments involving weak and electromagnetic interactions, neutrino oscillations, general hard scattering and experiments involving nuclear targets were explored. The studies were limited to the physics accessible using fixed target experimentation. While some of the avenues explored turn out to be relatively unrewarding in the light of competition elsewhere in the world, there are a number of positive conclusions reached about experimentation in the energy range available to the Main Injector and Tevatron. Some of the experiments would benefit from the increased intensity available from the Tevatron utilizing the Main Injector, while some require this increase. Finally, some of the experiments would use the Main Injector low energy, high intensity extracted beams directly. A program of electroweak and hard scattering experiments at fixed target energies retains the potential for important contributions to physics. The key to major parts of this program would appear to be the existence of the Main Injector. 115 refs, 17 figs.

  5. Unifying the object-oriented paradigm with semantic data models

    SciTech Connect

    Baltz, D.W. ); Nartker, T.; Taghva, K. . Dept. of Computer Science and Electrical Engineering)

    1990-01-01

    The object-oriented paradigm can be used to model behavior, and to a lesser extent, the structure of a problem domain. Semantic data models describe structure and semantics. This paper unifies the behavioral focus of the object-oriented paradigm with the structural and semantic focus of semantic data models. It presents abstractions to model static and derived data, composite objects, part hierarchies, semantic constraints, and abstractions for identifying behavior. The abstractions keep the model close to the problem domain, are independent of language features, and can be translated into object-oriented, relational or network implementations. This paper makes three principal contributions. First, a comprehensive set of data structuring abstractions is described. Second, semantic constraints inherent in the graphical representation of the abstractions are identified. Third, abstractions for identifying behavior are described. 14 refs., 17 figs.

  6. Asymmetrical field emitter

    DOEpatents

    Fleming, J.G.; Smith, B.K.

    1995-10-10

    A method is disclosed for providing a field emitter with an asymmetrical emitter structure having a very sharp tip in close proximity to its gate. One preferred embodiment of the present invention includes an asymmetrical emitter and a gate. The emitter having a tip and a side is coupled to a substrate. The gate is connected to a step in the substrate. The step has a top surface and a side wall that is substantially parallel to the side of the emitter. The tip of the emitter is in close proximity to the gate. The emitter is at an emitter potential, and the gate is at a gate potential such that with the two potentials at appropriate values, electrons are emitted from the emitter. In one embodiment, the gate is separated from the emitter by an oxide layer, and the emitter is etched anisotropically to form its tip and its asymmetrical structure. 17 figs.

  7. Canadian seismic agreement

    SciTech Connect

    Wetmiller, R.J.; Lyons, J.A.; Shannon, W.E.; Munro, P.S.; Thomas, J.T.; Andrew, M.D.; Lamontagne, M.; Wong, C.; Anglin, F.M.; Plouffe, M.; Adams, J.; Drysdale, J.A. . Geophysics Div.)

    1990-04-01

    During the period of this report, the contract resources were spent on operation and maintenance of the Eastern Canada Telemetred Network (ECTN), development of special purpose local network systems, servicing and maintenance of the strong-motion seismograph network in eastern Canada, operation of the Ottawa data lab and earthquake monitoring and reporting. Of special note in this period was the final completion of the Sudbury (SLTN) and Charlevoix (CLTN) local networks and the integration of their data processing and analysis requirements in the regular analysis stream for ECTN data. These networks now acquire high quality digital data for detailed analysis of seismic activity and source properties from these two areas, thus effectively doubling the amount of seismic data being received by the Ottawa data lab. 37 refs., 17 figs., 2 tabs.

  8. Script identification from images using cluster-based templates

    DOEpatents

    Hochberg, J.G.; Kelly, P.M.; Thomas, T.R.

    1998-12-01

    A computer-implemented method identifies a script used to create a document. A set of training documents for each script to be identified is scanned into the computer to store a series of exemplary images representing each script. Pixels forming the exemplary images are electronically processed to define a set of textual symbols corresponding to the exemplary images. Each textual symbol is assigned to a cluster of textual symbols that most closely represents the textual symbol. The cluster of textual symbols is processed to form a representative electronic template for each cluster. A document having a script to be identified is scanned into the computer to form one or more document images representing the script to be identified. Pixels forming the document images are electronically processed to define a set of document textual symbols corresponding to the document images. The set of document textual symbols is compared to the electronic templates to identify the script. 17 figs.

  9. The role of accelerators in the nuclear fuel cycle

    SciTech Connect

    Takahashi, Hiroshi.

    1990-01-01

    The use of neutrons produced by the medium energy proton accelerator (1 GeV--3 GeV) has considerable potential in reconstructing the nuclear fuel cycle. About 1.5 {approximately} 2.5 ton of fissile material can be produced annually by injecting a 450 MW proton beam directly into fertile materials. A source of neutrons, produced by a proton beam, to supply subcritical reactors could alleviate many of the safety problems associated with critical assemblies, such as positive reactivity coefficients due to coolant voiding. The transient power of the target can be swiftly controlled by controlling the power of the proton beam. Also, the use of a proton beam would allow more flexibility in the choice of fuel and structural materials which otherwise might reduce the reactivity of reactors. This paper discusses the rate of accelerators in the transmutation of radioactive wastes of the nuclear fuel cycles. 34 refs., 17 figs., 9 tabs.

  10. In situ vitrification model development and implementation plan

    SciTech Connect

    MacKinnon, R.J.; Murray, P.E.; Johnson, R.W.; Hagrman, D.L.; Slater, C.E.; Marwil, E.S.

    1990-08-01

    This document describes the In Situ Vitrification (ISV) Analysis Package being developed at the INEL to provide analytical support for (ISV) safety analysis and treatment performance predictions. Mathematical models and features which comprise this analysis package are presented and the proposed approach to model development and implementation is outlined. The objective of this document is two fold: to define preliminary design information and modeling objectives so that ISV modeling personnel can effectively modify existing models and formulate new models which are consistent with the objectives of the ISV treatability study and to provide sufficient technical information for internal and external reviewers to detect any shortcomings in model development and implementation plans. 27 refs., 17 figs., 3 tabs.

  11. Heat-Flux Gage thermophosphor system

    SciTech Connect

    Tobin, K.W.

    1991-08-01

    This document describes the installation, hardware requirements, and application of the Heat-Flux Gage (Version 1.0) software package developed by the Oak Ridge National Laboratory, Applied Technology Division. The developed software is a single component of a thermographic phosphor-based temperature and heat-flux measurement system. The heat-flux transducer was developed by EG G Energy Measurements Systems and consists of a 1- by 1-in. polymethylpentene sheet coated on the front and back with a repeating thermographic phosphor pattern. The phosphor chosen for this application is gadolinium oxysulphide doped with terbium. This compound has a sensitive temperature response from 10 to 65.6{degree}C (50--150{degree}F) for the 415- and 490-nm spectral emission lines. 3 refs., 17 figs.

  12. Crystal structure and microstructure of el-Fe2O3 particles

    SciTech Connect

    Ho, H.M.

    1985-08-01

    The structure and microstructure of el-Fe2O3 particles used in magnetic recording media have been analyzed by convergent beam electron diffraction and conventional transmission electron microscopy. Convergent beam electron diffraction results show that el-Fe2O3 particles have a primitive lattice with an m3m point group and a cubic superstructure with lattice parameter approximately equal to three times the lattice parameter of the magnetite structure. This superlattice is a result of cation vacancy ordering. An order-disorder transition of the structure is observed in the electron microscope and is believed to be caused by electron radiation-enhanced diffusion. Transmission electron microscopy results show that these particles are single crystals, and hence the theory that polycrystallinity is the cause of the discrepancy in coercivity between the experimental and theoretical values cannot be true. 35 refs., 17 figs., 5 tabs.

  13. Colonie Interim Storage Site annual site environmental report for calendar year 1989, Colonie, New York

    SciTech Connect

    Not Available

    1990-05-01

    IN 1984, Congress assigned the cleanup of the National Lead (NL) Industries site in Colonie, New York, to the Department of Energy (DOE) as part of a decontamination research and development project under the 1984 Energy and Water Appropriations Act. DOE then included the site in the Formerly Utilized Sites Remedial Action Program (FUSRAP), an existing DOE program to decontaminate or otherwise control sites where residual radioactive materials remain for the early years of the nation's atomic energy program. DOE instituted an environmental monitoring program at the site in 1984. Results are presented annually in reports such as this. Under FUSRAP, the first environmental monitoring report for this site presented data for calendar year 1984. This report presents the findings of the environmental monitoring program conducted during calendar year 1989. 16 refs., 17 figs., 14 tabs.

  14. Compilation of poultry and egg parameters for the PATHWAY code

    SciTech Connect

    Ikenberry, T.A.

    1982-08-01

    The PATHWAY computer code was developed as a part of the foodchain pathway analysis task. The objective was to estimate radionuclide ingestion rates of residents of Lincoln (Nevada), Washington (Utah), and Iron (Utah) counties during the period 1951-1962, which resulted from explosion of nuclear devices at the Nevada Test Site (NTS). Estimation of radionuclide ingestion rates involves determination of radionuclide concentrations in dietary items as a function of time and geographic area, and consumption rates of such items as a function of age and lifestyle. Poultry and eggs may have been relatively significant dose contributors to humans, because of the fairly large consumption rates of these products, and because of potential radionuclide concentration in them. This paper describes nuclide-dependent and nuclide-independent parameters related to poultry products, and the determination of specific values of these parameters. 17 figs., 10 tabs.

  15. Large scale DNA microsequencing device

    DOEpatents

    Foote, R.S.

    1997-08-26

    A microminiature sequencing apparatus and method provide a means for simultaneously obtaining sequences of plural polynucleotide strands. The apparatus cosists of a microchip into which plural channels have been etched using standard lithographic procedures and chemical wet etching. The channels include a reaction well and a separating section. Enclosing the channels is accomplished by bonding a transparent cover plate over the apparatus. A first oligonucleotide strand is chemically affixed to the apparatus through an alkyl chain. Subsequent nucleotides are selected by complementary base pair bonding. A target nucleotide strand is used to produce a family of labelled sequencing strands in each channel which are separated in the separating section. During or following separation the sequences are determined using appropriate detection means. 17 figs.

  16. NNWSI waste form testing at Argonne National Laboratory; Semiannual report: January-June 1987

    SciTech Connect

    Bates, J.K.; Gerding, T.J.; Abrajano, T.A. Jr.; Ebert, W.L.; Mazer, J.J.

    1988-11-01

    The Nevada Nuclear Waste Storage Investigation (NNWSI) Project is investigating the tuff beds of Yucca Mountain, Nevada, as a potential location for a high-level radioactive waste repository. As part of the waste package development portion of this project, experiments are being performed by the Chemical Technology Division of Argonne National Laboratory to study the behavior of the waste form under anticipated repository conditions. These experiments include the development and performance of a test to measure waste form behavior in unsaturated conditions and the performance of experiments designed to study the behavior of waste package components in an irradiated environment. Previous reports document developments in these areas through 1986. This report summarizes progress during the period January--June 1987, 19 refs., 17 figs., 20 tabs.

  17. Stable carbon isotope analysis of coprocessing materials

    SciTech Connect

    Lancet, M.S.; Winschel, R.A.; Burke, F.P.

    1991-03-01

    Research on coprocessing materials/products continued. Major topics reported here are described below. Microautoclave runs are described in which gases and insoluble organic matter produced from five coals and gases produced from three petroleum resids were analyzed to study feedstock/product selective isotopic fractionation. Selective isotopic fractionation was further explored through isotope analysis of the feed New Mexico coal and products from a continuous coal liquefaction run (HRI CC-10 or 227-68). Feeds (Texas lignite/Maya VSB) and products from two HRI continuous coprocessing runs (227-54 and 238-12) were analyzed. The results were corrected for selective isotopic fractionation and carbon sourcing was performed for the product fractions. {sup 1}H-NMR and phenolic -OH determinations are reported for all continuous unit samples obtained under this contract. 13 refs., 17 figs., 40 tabs.

  18. Real-time neural network earthquake profile predictor

    DOEpatents

    Leach, R.R.; Dowla, F.U.

    1996-02-06

    A neural network has been developed that uses first-arrival energy to predict the characteristics of impending earthquake seismograph signals. The propagation of ground motion energy through the earth is a highly nonlinear function. This is due to different forms of ground motion as well as to changes in the elastic properties of the media throughout the propagation path. The neural network is trained using seismogram data from earthquakes. Presented with a previously unseen earthquake, the neural network produces a profile of the complete earthquake signal using data from the first seconds of the signal. This offers a significant advance in the real-time monitoring, warning, and subsequent hazard minimization of catastrophic ground motion. 17 figs.

  19. Boiling water reactor licensing basis transient

    SciTech Connect

    Cheng, H. S.; Lu, M. S.; Shier, W. G.; Diamond, D. J.; Levine, M. M.; Odar, F.

    1980-01-01

    An analysis is presented of the licensing basis transient for a boiling water reactor where a turbine trip occurs without steam bypass. The analysis was performed by means of the two-dimensional (R,Z) core dynamics code BNL-TWIGL in conjunction with the system transient code RELAP-3B. Two plant models were used and produced similar results for the analysis of the Peach Bottom turbine trip tests. The models differed in the representation of the steam separator. The analysis of the licensing basis transient produced somewhat different results. The results of sensitivity studies to help explain the differences are presented as well as an analysis of the licensing basis transient with recirculation pump trip. 2 refs., 17 figs., 1 tab.

  20. Final focus systems for linear colliders

    SciTech Connect

    Erickson, R.A.

    1987-11-01

    The final focus system of a linear collider must perform two primary functions, it must focus the two opposing beams so that their transverse dimensions at the interaction point are small enough to yield acceptable luminosity, and it must steer the beams together to maintain collisions. In addition, the final focus system must transport the outgoing beams to a location where they can be recycled or safely dumped. Elementary optical considerations for linear collider final focus systems are discussed, followed by chromatic aberrations. The design of the final focus system of the SLAC Linear Collider (SLC) is described. Tuning and diagnostics and steering to collision are discussed. Most of the examples illustrating the concepts covered are drawn from the SLC, but the principles and conclusions are said to be generally applicable to other linear collider designs as well. 26 refs., 17 figs. (LEW)

  1. Apparatus and method for sealing perforated well casing

    DOEpatents

    Blount, C.G.; Benham, R.A.; Brock, J.L.; Emerson, J.A.; Ferguson, K.R.; Scheve, D.F.; Schmidt, J.H.; Schuler, K.W.; Stanton, P.L.

    1997-03-25

    Perforations and other openings in well casings, liners and other conduits may be substantially blocked or sealed to prevent fluid flow between the casing or liner interior and an earth formation by placing a radially expansible sleeve adjacent the perforations or openings and urging the sleeve into forcible engagement with the casing or inner wall using an explosive charge. An apparatus including a radially contracted sleeve formed by a coiled plate member or a tubular member having flutes defined by external and internal folds, may be deployed into a well casing or liner through a production or injection tubing string and on the end of a flexible cable or coilable tubing. An explosive charge disposed on the apparatus and within the sleeve may be detonated to urge the sleeve into forcible engagement with the casing inner wall. 17 figs.

  2. Resistance of Multi-Wythe Insulted Masonry Walls Subjected to Impulse Loads. Volume 1

    DTIC Science & Technology

    2008-12-01

    17 Fig. 3.5. Stress-strain behavior of Owens - Corning XEPS foam.......................................18 Fig. 3.6. Stress-strain behavior...Z-4 CM-Z-5 Fig. 3.5. Stress-strain behavior of Owens - Corning XEPS foam Strain (in/in) St re ss (p si ) 0 0.08 0.16 0.24 0.32 0.4 0.48 0.56 0.64...Specimen Section (in) (lb/ft3) (ksi) (psi) Owens - Corning CM-Z-3 2.50 dia x 2.0 1.507 1.31 32 Owens - Corning CM-Z-4 2.50 dia x 2.0 1.511 1.43 31 Owens

  3. The Robotic Edge Finishing Laboratory

    SciTech Connect

    Loucks, C.S.; Selleck, C.B.

    1990-08-01

    The Robotic Edge Finishing Laboratory at Sandia National Laboratories is developing four areas of technology required for automated deburring, chamfering, and blending of machined edges: (1) the automatic programming of robot trajectories and deburring processes using information derived from a CAD database, (2) the use of machine vision for locating the workpiece coupled with force control to ensure proper tool contact, (3) robotic deburring, blending, and machining of precision chamfered edges, and (4) in-process automated inspection of the formed edge. The Laboratory, its components, integration, and results from edge finishing experiments to date are described here. Also included is a discussion of the issues regarding implementation of the technology in a production environment. 24 refs., 17 figs.

  4. The macroscopic behavior of cumulus ensembles simulated by a cumulus ensemble model

    SciTech Connect

    Kuan-Man Xu; Akio Arakawa; Krueger, S.K. )

    1992-12-15

    The two-dimensional UCLA cumulus ensemble model (CEM), which covers a large horizontal area with a sufficiently small horizontal grid size, is used in this study. A number of simulation experiments are performed with the CEM to study the macroscopic behavior of cumulus convection under a variety of different large-scale and underlying surface conditions. Specifically, the modulation of cumulus activity by the imposed large-scale processes and the eddy kinetic energy (EKE) budget are investigated in detail. In all simulations, cumulus convection is rather strongly modulated by large-scale advective processes in spite of the existence of some nonmodulated high-frequency fluctuations. The modulation exhibits some phase delays, however, when the basic wind shear is strong. This is presumably associated with the existence of mesoscale convective organization. The EKE budget analysis shows that the net eddy buoyancy generation rate is nearly zero for a wide range of cumulus ensembles. 34 refs., 17 figs., 2 tabs.

  5. Tests of the radiation hardness of VLSI Integrated Circuits and Silicon Strip Detectors for the SSC (Superconducting Super Collider) under neutron, proton, and gamma irradiation

    SciTech Connect

    Ziock, H.J.; Milner, C.; Sommer, W.F. ); Carteglia, N.; DeWitt, J.; Dorfan, D.; Hubbard, B.; Leslie, J.; O'Shaughnessy, K.F.; Pitzl, D.; Rowe, W.A.; Sadrozinski, H.F.W.; Seiden, A.; Spencer, E. . Inst. for Particle Physics); Ellison, J.A. ); Ferguson, P. ); Giubellino

    1990-01-01

    As part of a program to develop a silicon strip central tracking detector system for the Superconducting Super Collider (SSC) we are studying the effects of radiation damage in silicon detectors and their associated front-end readout electronics. We report on the results of neutron and proton irradiations at the Los Alamos National Laboratory (LANL) and {gamma}-ray irradiations at UC Santa Cruz (UCSC). Individual components on single-sided AC-coupled silicon strip detectors and on test structures were tested. Circuits fabricated in a radiation hard CMOS process and individual transistors fabricated using dielectric isolation bipolar technology were also studied. Results indicate that a silicon strip tracking detector system should have a lifetime of at least one decade at the SSC. 17 refs., 17 figs.

  6. Core analysis in a low permeability sandstone reservoir: Results from the Multiwell Experiment

    SciTech Connect

    Sattler, A.R.

    1989-04-01

    Over 4100 ft (1100 ft oriented) of Mesaverde core was taken during the drilling of the three Multiwell Experiment (MWX) wells, for study in a comprehensive core analysis program. This core traversed five separate depositional environments (shoreline/marine, coastal, paludal, fluvial, and paralic), and almost every major sand in the Mesaverde at the site was sampled. This paper summarizes MWX core analysis and describes the petrophysical properties at the MWX site; reservoir parameters, including permeabilities of naturally fractured core; and mechanical rock properties including stress-related measurements. Some correlations are made between reservoir properties and mineralogy/petrology data. Comparisons are made between the properties of lenticular and blanket sandstone morphologies existing at the site. This paper provides an overview of a complete core analysis in a low-permeability sandstone reservoir. 66 refs., 17 figs. , 9 tabs.

  7. Statistical evaluation of PACSTAT random number generation capabilities

    SciTech Connect

    Piepel, G.F.; Toland, M.R.; Harty, H.; Budden, M.J.; Bartley, C.L.

    1988-05-01

    This report summarizes the work performed in verifying the general purpose Monte Carlo driver-program PACSTAT. The main objective of the work was to verify the performance of PACSTAT's random number generation capabilities. Secondary objectives were to document (using controlled configuration management procedures) changes made in PACSTAT at Pacific Northwest Laboratory, and to assure that PACSTAT input and output files satisfy quality assurance traceability constraints. Upon receipt of the PRIME version of the PACSTAT code from the Basalt Waste Isolation Project, Pacific Northwest Laboratory staff converted the code to run on Digital Equipment Corporation (DEC) VAXs. The modifications to PACSTAT were implemented using the WITNESS configuration management system, with the modifications themselves intended to make the code as portable as possible. Certain modifications were made to make the PACSTAT input and output files conform to quality assurance traceability constraints. 10 refs., 17 figs., 6 tabs.

  8. Underground barrier construction apparatus with soil-retaining shield

    DOEpatents

    Gardner, B.M.; Smith, A.M.; Hanson, R.W.; Hodges, R.T.

    1998-08-04

    An apparatus is described for building a horizontal underground barrier by cutting through soil and depositing a slurry, preferably one which cures into a hardened material. The apparatus includes a digging means for cutting and removing soil to create a void under the surface of the ground, a shield means for maintaining the void, and injection means for inserting barrier-forming material into the void. In one embodiment, the digging means is a continuous cutting chain. Mounted on the continuous cutting chain are cutter teeth for cutting through soil and discharge paddles for removing the loosened soil. This invention includes a barrier placement machine, a method for building an underground horizontal containment barrier using the barrier placement machine, and the underground containment system. Preferably the underground containment barrier goes underneath and around the site to be contained in a bathtub-type containment. 17 figs.

  9. Impact of mechanical- and maintenance-induced failures of main reactor coolant pump seals on plant safety

    SciTech Connect

    Azarm, M A; Boccio, J L; Mitra, S

    1985-12-01

    This document presents an investigation of the safety impact resulting from mechanical- and maintenance-induced reactor coolant pump (RCP) seal failures in nuclear power plants. A data survey of the pump seal failures for existing nuclear power plants in the US from several available sources was performed. The annual frequency of pump seal failures in a nuclear power plant was estimated based on the concept of hazard rate and dependency evaluation. The conditional probability of various sizes of leak rates given seal failures was then evaluated. The safety impact of RCP seal failures, in terms of contribution to plant core-melt frequency, was also evaluated for three nuclear power plants. For leak rates below the normal makeup capacity and the impact of plant safety were discussed qualitatively, whereas for leak rates beyond the normal make up capacity, formal PRA methodologies were applied. 22 refs., 17 figs., 19 tabs.

  10. Seasonal cycle of the residual mean meridional circulation in the stratosphere

    SciTech Connect

    Rosenlof, K.H.

    1995-03-20

    The transformed Eulerian-mean (TEM) residual circulation is used to study the zonally averaged transport of mass in the stratosphere. The residual circulation is estimated from heating rates computed with a radiative transfer model using data from the Upper Atmosphere Research Satellite (UARS) as inputs. An annual cycle exists in the resulting circulation in the lower stratosphere, with a larger net upward mass flux across a pressure surface in the tropics during northern hemisphere winter than during northern hemisphere summer. The annual cycle in upward tropical mass flux follows the annual cycle in downward mass flux across a pressure surface in the northern hemisphere extratropics. It is argued that the annual cycle in zonal momentum forcing in the northern hemisphere stratosphere is controlling mass flux across a pressure surface in the lower stratosphere both in the tropics and in the northern hemisphere extratropics. 40 refs., 17 figs., 5 tabs.

  11. Hanford cultural resources management plan

    SciTech Connect

    Chatters, J.C.

    1989-06-01

    As a federal agency, the US Department of Energy (DOE) has been directed by Congress and the President to provide leadership in the preservation of prehistoric, historical, and cultural resources on lands it administers, to manage these in a spirit of stewardship for future generations, and to protect and preserve the rights of Native Americans to religious freedom. The purpose of this document is to describe how the DOE-Richland Operations (DOE-RL) will meet those responsibilities on the Hanford Site, pursuant to guidelines for Agency Responsibilities under the Historic Preservation Act (FR 53:31, February 17, 1988). This document is intended for multiple uses. Among other things, the text is designed as a manual for cultural resource managers to follow and as an explanation of the process of cultural resource regulatory compliance for the DOE-RL and Site contractors. 10 refs., 17 figs., 11 tabs.

  12. System for monitoring an industrial process and determining sensor status

    DOEpatents

    Gross, K.C.; Hoyer, K.K.; Humenik, K.E.

    1997-05-13

    A method and system are disclosed for monitoring an industrial process and a sensor. The method and system include generating a first and second signal characteristic of an industrial process variable. One of the signals can be an artificial signal generated by an auto regressive moving average technique. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the two pairs of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test. 17 figs.

  13. System for monitoring an industrial process and determining sensor status

    DOEpatents

    Gross, K.C.; Hoyer, K.K.; Humenik, K.E.

    1995-10-17

    A method and system for monitoring an industrial process and a sensor are disclosed. The method and system include generating a first and second signal characteristic of an industrial process variable. One of the signals can be an artificial signal generated by an auto regressive moving average technique. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the two pairs of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test. 17 figs.

  14. The role of technology in reducing health care costs. Final project report

    SciTech Connect

    Sill, A.E.; Warren, S.; Dillinger, J.D.; Cloer, B.K.

    1997-08-01

    Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. This study was conducted by implementing both top-down and bottom-up strategies. The top-down approach used prosperity gaming methodology to identify future health care delivery needs. This effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements. The bottom-up approach identified and ranked interventional therapies employed in existing care delivery systems for a host of health-related conditions. Economic analysis formed the basis for development of care pathway interaction models for two of the most pervasive, chronic disease/disability conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Societal cost-benefit relationships based on these analyses were used to evaluate the effect of emerging technology in these treatment areas. 17 figs., 48 tabs.

  15. FFTF Event Fact Sheet root cause analysis calendar year 1985 through 1988

    SciTech Connect

    Griffin, G.B.

    1988-12-01

    The Event Fact Sheets written from January 1985 through mid August 1988 were reviewed to determine their root causes. The review group represented many of the technical disciplines present in plant operation. The review was initiated as an internal critique aimed at maximizing the ``lessons learned`` from the event reporting system. The root causes were subjected to a Pareto analysis to determine the significant causal factor groups. Recommendations for correction of the high frequency causal factors were then developed and presented to the FFTF Plant management. In general, the distributions of the causal factors were found to closely follow the industry averages. The impacts of the events were also studied and it was determined that we generally report events of a level of severity below that of the available studies. Therefore it is concluded that the recommendations for corrective action are ones to improve the overall quality of operations and not to correct significant operational deficiencies. 17 figs.

  16. Analysis of health impact inputs to the US Department of Energy's risk information system

    SciTech Connect

    Droppo, J.G. Jr.; Buck, J.W.; Strenge, D.L.; Siegel, M.R.

    1990-08-01

    The US Department of Energy (DOE) is in the process of completing a survey of environmental problems, referred to as the Environmental Survey, at their facilities across the country. The DOE Risk Information System (RIS) is being used to prioritize these environmental problems identified in the Environmental Survey's findings. This report contains a discussion of site-specific public health risk parameters and the rationale for their inclusion in the RIS. These parameters are based on computed potential impacts obtained with the Multimedia Environmental Pollutant Assessment System (MEPAS). MEPAS is a computer-based methodology for evaluating the potential exposures resulting from multimedia environmental transport of hazardous materials. This report has three related objectives: document the role of MEPAS in the RIS framework, report the results of the analysis of alternative risk parameters that led to the current RIS risk parameters, and describe analysis of uncertainties in the risk-related parameters. 20 refs., 17 figs., 10 tabs.

  17. Reactive-element effect studied using ion implantation

    SciTech Connect

    King, W.E.; Grabowski, K.S.

    1988-11-01

    Implantation of reactive elements into metals that form chromia layers upon exposure to high temperature oxidizing environments has a very large effect on the growth rate of the oxide and adhesion of the oxide to the base alloy. We have investigated the effect of Y ion implantation on the high temperature oxidation of Fe-24Cr using Rutherford backscattering spectroscopy, secondary ion mass spectroscopy, and electron microscopy. Analytical tools have been applied to determine the spatial distribution of Y, the microstructure of the oxide, and contribution of oxygen transport to the oxidation process. Results are compared with similar experiments in Fe-Cr alloys with Y additions and with results of cation and anion tracer diffusion experiments. 51 refs., 17 figs., 3 tabs.

  18. Prospects at high energies

    SciTech Connect

    Quigg, C.

    1988-11-01

    I discuss some possibilities for neutrino experiments in the fixed-target environment of the SPS, Tevatron, and UNK, with their primary proton beams of 0.4, 0.9, and 3.0 TeV. The emphasis is on unfinished business: issues that have been recognized for some time, but not yet resolved. Then I turn to prospects for proton-proton colliders to explore the 1-TeV scale. I review the motivation for new physics in the neighborhood of 1 TeV and mention some discovery possibilities for high-energy, high-luminosity hadron colliders and the implications they would have for neutrino physics. I raise the possibility of the direct study of neutrino interactions in hadron colliders. I close with a report on the status of the SSC project. 38 refs., 17 figs.

  19. PC-1D installation manual and user's guide

    SciTech Connect

    Basore, P.A.

    1991-05-01

    PC-1D is a software package for personal computers that uses finite-element analysis to solve the fully-coupled two-carrier semiconductor transport equations in one dimension. This program is particularly useful for analyzing the performance of optoelectronic devices such as solar cells, but can be applied to any bipolar device whose carrier flows are primarily one-dimensional. This User's Guide provides the information necessary to install PC-1D, define a problem for solution, solve the problem, and examine the results. Example problems are presented which illustrate these steps. The physical models and numerical methods utilized are presented in detail. This document supports version 3.1 of PC-1D, which incorporates faster numerical algorithms with better convergence properties than previous versions of the program. 51 refs., 17 figs., 5 tabs.

  20. Environmental Survey preliminary report, Department of Energy (DOE) activities at Santa Susana Field Laboratories, Ventura County, California

    SciTech Connect

    Not Available

    1989-02-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) activities at the Santa Susana Field Laboratories Site (DOE/SSFL), conducted May 16 through 26, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual participants for the Survey team are being supplied by an private contractor. The objective of the survey is to identify environmental problems and areas of environmental risk associated with DOE activities at SSFL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at SSFL, and interviews with site personnel. 90 refs., 17 figs., 28 tabs.

  1. Repair, sidetrack, drilling, and completion of EE-2A for Phase 2 reservoir production service

    SciTech Connect

    Dreesen, D.S.; Cocks, G.G.; Nicholson, R.W.; Thomson, J.C.

    1989-08-01

    Hot Dry Rock (HDR) geothermal energy well EE-2 at Fenton Hill, New Mexico, was sidetracked and redrilled into the HDR Phase II reservoir after two unsuccessful attempts to repair damage in the lower wellbore. Before sidetracking was begun, six cement slurries were pumped to plug the abandoned lower wellbore and to support the production casing where drilling wear was predicted and where sidetracking was to occur. This work and the redrill of EE-2A were completed in November 1987. Specifications were prepared for a state-of-the-art tie-back casing, which was procured, manufactured, and delivered to Fenton Hill in May 1988. The well was then completed in June 1988 for hot-water production service by cementing in a liner and the upper section of production casing and installing and cementing a tie-back casing string. 24 refs., 17 figs., 5 tabs.

  2. Tone signal generator for producing multioperator tone signals using an operator circuit including a waveform generator, a selector and an enveloper

    DOEpatents

    Dong, Q.; Jenkins, M.V.; Bernadas, S.R.

    1997-09-09

    A frequency modulation (FM) tone signal generator for generating a FM tone signal is disclosed. The tone signal generator includes a waveform generator having a plurality of wave tables, a selector and an enveloper. The waveform generator furnishes a waveform signal in response to a phase angle address signal. Each wave table stores a different waveform. The selector selects one of the wave tables in response to a plurality of selection signals such that the selected wave table largely provides the waveform signal upon being addressed largely by the phase angle address signal. Selection of the selected wave table varies with each selection signal. The enveloper impresses an envelope signal on the waveform signal. The envelope signal is used as a carrier or modulator for generating the FM tone signal. 17 figs.

  3. Unsaturated flow and transport through fractured rock related to high-level waste repositories; Final report, Phase 3

    SciTech Connect

    Evans, D.D.; Rasmussen, T.C.

    1991-01-01

    Research results are summarized for a US Nuclear Regulatory Commission contract with the University of Arizona focusing on field and laboratory methods for characterizing unsaturated fluid flow and solute transport related to high-level radioactive waste repositories. Characterization activities are presented for the Apache Leap Tuff field site. The field site is located in unsaturated, fractured tuff in central Arizona. Hydraulic, pneumatic, and thermal characteristics of the tuff are summarized, along with methodologies employed to monitor and sample hydrologic and geochemical processes at the field site. Thermohydrologic experiments are reported which provide laboratory and field data related to the effects conditions and flow and transport in unsaturated, fractured rock. 29 refs., 17 figs., 21 tabs.

  4. Histopathogenesis of carcinoma in situ of the uterine cervix*

    PubMed Central

    Wahi, P. N.; Kehar, Usha; Mali, S.; Misra, G. D.

    1962-01-01

    Cancer of the cervix is amenable to treatment provided it is diagnosed at the preinvasive stage, and it is therefore imperative to be able to identify cases of symptomless cervical cancer, which invariably presents no visible alteration in the appearance of the mucous membrane. Fortunately, this is possible by study of vaginal smears for exfoliated cells. In view of the ease with which carcinoma of the uterine cervix can be induced in mice and of its similarity to analogous lesions in women, it was thought that study of early cytological and morphological changes in cervical carcinoma of the mouse—especially at the in situ stage—might prove valuable for biological and therapeutic studies of human cervical carcinoma. This paper reports on study of the progressive epithelial changes in the mouse cervix by means of exfoliated cells in vaginal smears and histological examination of the cervical epithelium after intravaginal painting with 3,4-benzpyrene. The authors consider that basal cell hyperplasia and the early grades of dysplasia are reversible if the carcinogenic agent is withdrawn, but that the lesion is likely to be invasive and progressive once the presence of large numbers of squamoid cells indicates that the dysplastic changes involve the superficial layers. ImagesFIG. 1-5FIG. 6-10FIG. 11-15FIG. 16-20FIG. 21-25 PMID:14004393

  5. Mechanical swirler for a low-NO{sub x}, weak-swirl burner

    DOEpatents

    Cheng, R.K.; Yegian, D.T.

    1999-03-09

    Disclosed is a mechanical swirler for generating diverging flow in lean premixed fuel burners. The swirler of the present invention includes a central passage with an entrance for accepting a feed gas, a flow balancing insert that introduces additional pressure drop beyond that occurring in the central passage in the absence of the flow balancing insert, and an exit aligned to direct the feed gas into a combustor. The swirler also has an annular passage about the central passage and including one or more vanes oriented to impart angular momentum to feed gas exiting the annular passage. The diverging flow generated by the swirler stabilizes lean combustion thus allowing for lower production of pollutants, particularly oxides of nitrogen. 16 figs.

  6. Savannah River Laboratory Seepage Basins: Waste site assessment report

    SciTech Connect

    Haselow, J.S.; Looney, B.B.; Nichols, R.L.

    1989-09-05

    This Waste Site Assessment for the SRL Seepage Basins is the second in a series of documents being prepared to support development of an appropriate closure plan for these basins. The closure of these basins will be designed to provide protection to human health and the environment and to meet the provisions of the Consent Decree. A Technical Data Summary for these basins has already been submitted as part of the Consent Decree. This Site Assessment Report includes a waste site characterization, and a discussion of closure options for the basins. A closure option is recommended in this report, but details of the recommended closure are not provided in this report since they will be provided in a subsequent closure plan. The closure plan is the third document required under the Consent Decree. 18 refs., 16 figs., 10 tabs.

  7. Two-axis tracking solar collector mechanism

    DOEpatents

    Johnson, K.C.

    1992-12-08

    This invention is a novel solar tracking mechanism incorporating a number of practical features that give it superior environmental resilience and exceptional tracking accuracy. The mechanism comprises a lightweight space-frame assembly supporting an array of point-focus Fresnel lenses in a two-axis tracking structure. The system is enclosed under a glass cover which isolates it from environmental exposure and enhances tracking accuracy by eliminating wind loading. Tracking accuracy is also enhanced by the system's broad-based tracking support. The system's primary intended application would be to focus highly concentrated sunlight into optical fibers for transmission to core building illumination zones, and the system may also have potential for photovoltaic or photothermal solar energy conversion. 16 figs.

  8. Mathematical model for predicting the probability of acute mortality in a human population exposed to accidentally released airborne radionuclides. Final report for Phase I

    SciTech Connect

    Filipy, R.E.; Borst, F.J.; Cross, F.T.; Park, J.F.; Moss, O.R.; Roswell, R.L.; Stevens, D.L.

    1980-05-01

    A mathematical model was constructed for the purpose of predicting the fraction of human population which would die within 1 year of an accidental exposure to airborne radionuclides. The model is based on data from laboratory experiments with rats, dogs and baboons, and from human epidemiological data. Doses from external, whole-body irradiation and from inhaled, alpha- and beta-emitting radionuclides are calculated for several organs. The probabilities of death from radiation pneumonitis and from bone marrow irradiation are predicted from doses accumulated within 30 days of exposure to the radioactive aerosol. The model is compared with existing similar models under hypothetical exposure conditions. Suggestions for further experiments with inhaled radionuclides are included. 25 refs., 16 figs., 13 tabs.

  9. Carrier transport and collection in fully depleted semiconductors by a combined action of the space charge field and the field due to electrode voltages

    DOEpatents

    Rehak, P.; Gatti, E.

    1987-08-18

    A semiconductor charge transport device and method for making same are disclosed, characterized by providing a thin semiconductor wafer having rectifying junctions on its opposing major surfaces and including a small capacitance ohmic contact, in combination with bias voltage means and associated circuit means for applying a predetermined voltage to effectively deplete the wafer in regions thereof between the rectifying junctions and the ohmic contact. A charge transport device of the invention is usable as a drift chamber, a low capacitance detector, or a charge coupled device each constructed according to the methods of the invention for making such devices. Detectors constructed according to the principles of the invention are characterized by having significantly higher particle position indicating resolution than is attainable with prior art detectors, while at the same time requiring substantially fewer readout channels to realize such high resolution. 16 figs.

  10. Characterization of high power flashlamps and application to Nd:glass laser pumping

    SciTech Connect

    Powell, H.T.; Erlandson, A.C.; Jancaitis, K.S.

    1986-01-17

    Detailed spectral and temporal measurements of the output radiation from Xe flashlamps are reported together with their use in predicting the pumping efficiency of Nd-doped laser glass. We have made absolute spectral-intensity measurements for 0.5, 1.5, and 4.2-cm-bore flashlamps for input powers ranging from 5 to 90 kW/cm/sup 2/ and pulselengths of 600 ..mu..s. Under quasi-stationary conditions these flashlamps emit essentially identical spectra when excited at equal input power per unit-area of the bore. This behavior is characteristic of an optically-thick radiator although it is not completely clear why flashlamps should behave this way. A simple model is also described which accounts for the transient response of flashlamps by characterizing the output spectra and radiation efficiencies in terms of the radiant output power rather than the electrical input power. 23 refs., 16 figs.

  11. Recent results on S = /minus/3 baryon spectroscopy from the LASS (Large Aperture Superconducting Solenoid) spectrometer

    SciTech Connect

    Aston, D.; Awaji, N.; Bienz, T.; Bird, F.; D'Amore, J.; Dunwoodie, W.; Endorf, R.; Fujii, K.; Hayashiii, H.; Iwata, S.

    1989-02-01

    Data demonstrating the existence of two ..cap omega../sup */minus// resonances produced in K/sup /minus//p interactions at 11 GeV/c in the LASS spectrometer are presented. The first state is seen in the ..xi../sup */degree//minus// decay channel with mass 2253 +- 13 MeV/c/sup 2/ and width 81 +- 38 MeV/c/sup 2/, and the second in the ..cap omega../sup /minus//..pi../sup +/..pi../sup /minus// system with mass 2474 +- 12 and width 72 +- 33 MeV/c/sup 2/. Inclusive cross sections corresponding to these decays corrected for unseen charge modes are estimated to be respectively 630 +- 180 and 290 +- 90 nb, respectively. 10 refs., 16 figs., 1 tab.

  12. Evaluation of thermal remote sensing as a low-cost regional geothermal exploration technique in New Mexico. Final report

    SciTech Connect

    Inglis, M.; Budge, T.K.

    1985-03-01

    Airborne and satellite borne thermal infrared scanner data were analyzed for application in the exploration of geothermal resources in New Mexico. The location for this study was the East Mesa Geothermal Field near Las Cruces, New Mexico. Primary sensor was the Thermal Infrared Multispectral Scanner (TIMS) which obtained data at 10-meter resolution. Additional data for comparison came from the Heat Capacity Mapping Mission (HCMM) satellite which provided data at 600-meter resolution. These data were compared to the soils, vegetation, and geology of the area, as well as borehole temperature data in an attempt to explain temperature patterns and anomalies. Thermal infrared scanner data were found to be too sensitive to solar-induced temperature anomalies to directly reflect the presence of subsurface geothermal anomalies but may provide valuable supporting information for a geothermal exploration program. 15 refs., 16 figs., 3 tabs.

  13. Toughening epoxy resin with poly(methyl methacrylate)-grafted natural rubber

    SciTech Connect

    Rezaifard, A.H.; Hodd, K.A.; Barton, J.M.

    1993-12-31

    A novel rubber, poly(methyl methacrylate)-g-natural rubber (Hevea-plus MG), has been studied as a toughening agent for bisphenol A diglycidyl ether (Shell 828 epoxy resin) cured with piperidine. Effective dispersions of the rubber, in concentrations of 2-10 parts per hundred parts resin, were achieved by adjusting the solubility parameter of the epoxy to approximate that of poly(methyl methacrylate) by adding bisphenol A. The fracture energy of the rubber-modified resin was determined by compact tension tests (in the temperature range -60 to +40{degrees}C) and by Charpy impact tests. The poly(methyl methacrylate)-g-natural rubber was found to be an effective toughening agent for the epoxy resin at both low and high rates of strain. Possible fracture mechanisms are discussed. 22 refs., 16 figs., 5 tabs.

  14. Observation and phenomenology of glueballs

    SciTech Connect

    Lindenbaum, S.J.

    1985-01-01

    The experimental evidence and the relevant phenomenology of glueballs are reviewed. The opinion is expressed that the glueball resonance explanation is the only viable one for the data on g/sub T/, g/sub T/sup 1//, and g/sub T/sup 11//. It is shown that alternative explanations are either incorrect, or do not fit the data, or both, leading to the conclusion that these states are probably produced by glueballs. The OZI rule is explained. Glueball masses and width are considered. Some conclusions are drawn regarding an OZI suppressed reaction ..pi../sup -/p ..-->.. phi phi n. Glueball candidates from the J/psi radiative decay are discussed. 44 refs., 16 figs. (LEW)

  15. Fixed-bed gasification research using US coals. Volume 17. Gasification and liquids recovery of four US coals

    SciTech Connect

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-12-01

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial participants and government agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) group. This report is the seventeenth in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. This report describes the gasification and pyrolysis liquids recovery test for four different coals: Illinois No. 6, SUFCO, Indianhead lignite, and Hiawatha. This test series spanned from July 15, 1985, through July 28, 1985. 4 refs., 16 figs., 19 tabs.

  16. Transport analysis of stellarator reactors

    SciTech Connect

    Painter, S.L. . Dept. of Nuclear Engineering Australian National Univ., Canberra . Research School of Physical Sciences); Lyon, J.F. )

    1991-02-01

    The performance of deuterium-tritium stellarator reactors is studied with a new, fast one-dimensional (1-D) transport survey code that is based on the spectral collocation method. Two operating modes with different signs of the assumed radial electric field are identified. The operating mode with a positive electric field is characterized by high temperatures and moderate densities, whereas the other mode has lower temperatures and higher densities. Both modes lead to possible reactors that could tolerate a large alpha-particle energy loss. The sensitivity to device parameters and to profile assumptions is examined. Scaling expressions useful for parametric studies are obtained for different quantities of interest, and the 1-D code results are compared with results derived from an empirical scaling relation. Deuterium-helium-3 (D-{sup 3}He) operation is also feasible but is more demanding. The implications for stellarator reactor design optimization are discussed. 47 refs., 16 figs., 1 tab.

  17. Los Alamos National Laboratory corregated metal pipe saw facility preliminary safety analysis report. Volume I

    SciTech Connect

    1990-09-19

    This Preliminary Safety Analysis Report addresses site assessment, facility design and construction, and design operation of the processing systems in the Corrugated Metal Pipe Saw Facility with respect to normal and abnormal conditions. Potential hazards are identified, credible accidents relative to the operation of the facility and the process systems are analyzed, and the consequences of postulated accidents are presented. The risk associated with normal operations, abnormal operations, and natural phenomena are analyzed. The accident analysis presented shows that the impact of the facility will be acceptable for all foreseeable normal and abnormal conditions of operation. Specifically, under normal conditions the facility will have impacts within the limits posted by applicable DOE guidelines, and in accident conditions the facility will similarly meet or exceed the requirements of all applicable standards. 16 figs., 6 tabs.

  18. LaNi{sub 5}-based metal hydride electrode in Ni-MH rechargeable cells

    DOEpatents

    Bugga, R.V.; Fultz, B.; Bowman, R.; Surampudi, S.R.; Witham, C.K.; Hightower, A.

    1999-03-30

    An at least ternary metal alloy of the formula AB{sub (Z-Y)}X{sub (Y)} is disclosed. In this formula, A is selected from the rare earth elements, B is selected from the elements of Groups 8, 9, and 10 of the Periodic Table of the Elements, and X includes at least one of the following: antimony, arsenic, germanium, tin or bismuth. Z is greater than or equal to 4.8 and less than or equal to 6.0. Y is greater than 0 and less than 1. Ternary or higher-order substitutions to the base AB{sub 5} alloys that form strong kinetic interactions with the predominant metals in the base metal hydride are used to form metal alloys with high structural integrity after multiple cycles of hydrogen sorption. 16 figs.

  19. Modal testing in the design evaluation of wind turbines

    SciTech Connect

    Lauffer, J.P.; Carne, T.G.; Ashwill, T.D.

    1987-01-01

    This paper reviews several techniques which have been used to successfully measure modal parameters for wind turbines. Due to problems in providing low frequency excitation (0.1 to 5.0 Hz), modal testing of moderate-size turbines can be difficult. Several techniques of low frequency excitation have been explored, including impact, wind, step-relaxation, and human input. As one application of these techniques, a prototype turbine was tested and two modal frequencies were found to be very close to integral multiples of the operating speed, which caused a resonant condition. The design was modified to shift these frequencies, and the turbine was retested to confirm the expected changes in the modal frequencies. 8 refs., 16 figs., 1 tab.

  20. Fractionally distilled SRC-I, SRC-II, EDS, H-Coal and ITSL direct coal liquefaction process materials: a comparative summary of chemical analysis and biological testing

    SciTech Connect

    Wright, C.W.; Later, D.W.; Dauble, D.D.; Wilson, B.W.

    1985-07-01

    This document reports and compares the results compiled from chemical analyses and biological testing of coal liquefaction process materials which were fractionally distilled, after production, into various comparable boiling-point range cuts. Comparative analyses were performed on solvent refined coal (SRC)-I, SRC-II, H-Coal, EDS an integrated two-stage liquefaction (ITSL) distillate materials. Mutagenicity and carcinogenicity assays were conducted in conjunction with chromatographic and mass spectrometric analyses to provide detailed, comparative, chemical and biological assessments. Where possible, results obtained from the distillate cuts are compared to those from coal liquefaction materials with limited boiling ranges. Work reported here was conducted by investigators in the Biology and Chemistry Department at the Pacific Northwest Laboratory (PNL), Richland, WA. 38 refs., 16 figs., 27 tabs.

  1. Constant field gradient planar coupled cavity structure

    DOEpatents

    Kang, Y.W.; Kustom, R.L.

    1999-07-27

    A cavity structure is disclosed having at least two opposing planar housing members spaced apart to accommodate the passage of a particle beam through the structure between the members. Each of the housing members have a plurality of serially aligned hollows defined therein, and also passages, formed in the members, which interconnect serially adjacent hollows to provide communication between the hollows. The opposing planar housing members are spaced and aligned such that the hollows in one member cooperate with corresponding hollows in the other member to form a plurality of resonant cavities aligned along the particle beam within the cavity structure. To facilitate the obtaining of a constant field gradient within the cavity structure, the passages are configured so as to be incrementally narrower in the direction of travel of the particle beam. In addition, the spacing distance between the opposing housing members is configured to be incrementally smaller in the direction of travel of the beam. 16 figs.

  2. Petroleum supply monthly, November 1996 with data for September 1996

    SciTech Connect

    1996-11-01

    Data presented in this report describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products fin the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  3. System for monitoring the growth of crystalline films on stationary substrates

    DOEpatents

    Sheldon, P.

    1996-12-31

    A system for monitoring the growth of crystalline films on stationary or rotating substrates includes a combination of some or all of the elements including a photodiode sensor for detecting the intensity of incoming light and converting it to a measurable current, a lens for focusing the RHEED pattern emanating from the phosphor screen onto the photodiode, an interference filter for filtering out light other than that which emanates from the phosphor screen, a current amplifier for amplifying and convening the current produced by the photodiode into a voltage, a computer for receiving the amplified photodiode current for RHEED data analysis, and a graphite impregnated triaxial cable for improving the signal to noise ratio obtained while sampling a stationary or rotating substrate. A rotating stage for supporting the substrate with diametrically positioned electron beam apertures and an optically encoded shaft can also be used to accommodate rotation of the substrate during measurement. 16 figs.

  4. System for monitoring the growth of crystalline films on stationary substrates

    DOEpatents

    Sheldon, P.

    1995-10-10

    A system for monitoring the growth of crystalline films on stationary or rotating substrates includes a combination of some or all of the elements including a photodiode sensor for detecting the intensity of incoming light and converting it to a measurable current, a lens for focusing the RHEED pattern emanating from the phosphor screen onto the photodiode, an interference filter for filtering out light other than that which emanates from the phosphor screen, a current amplifier for amplifying and converting the current produced by the photodiode into a voltage, a computer for receiving the amplified photodiode current for RHEED data analysis, and a graphite impregnated triaxial cable for improving the signal-to-noise ratio obtained while sampling a stationary or rotating substrate. A rotating stage for supporting the substrate with diametrically positioned electron beam apertures and an optically encoded shaft can also be used to accommodate rotation of the substrate during measurement. 16 figs.

  5. Scrap tire recycling: Promising high value applications. Final report

    SciTech Connect

    Bauman, B.D.; Leskovyansky, P.J.; Drela, H.

    1993-11-01

    Surface modification of scrap tire rubber (rubber particles treated with chlorine gas) show promise for ameliorating the scrap tire problem (the treated rubber can be used as a component in high- performance, expensive polymer systems). The process has been proven in Phase I. Phase II covers market/applications, process development (Forberg-design mixer reactor was chosen), plant design, capital cost estimate, economics environmental/safety/health, and energy impact. Almost of the small amount of chlorine is consumed. The capital costs for a rubber particle treatment facility are attractive, being at least two orders of magnitude less than that of facilities for making new polymer materials. Large volume markets using treated rubber are needed. The amount of scrap rubber available is small compared to the polymers available for replacement. 7 tabs, 16 figs.

  6. Trends in radionuclide concentrations for selected wildlife and food products near the Hanford Site from 1971 through 1988

    SciTech Connect

    Eberhardt, L.E.; Cadwell, L.L.; Price, K.R.; Carlile, D.W.; Alaska Dept. of Fish and Game, Juneau, AK )

    1989-09-01

    From 1971 through 1988 at least 40 species of wildlife and 27 different types of food products were collected and analyzed for radionuclides as part of the Pacific Northwest Laboratory (PNL) Environmental Monitoring Program. This report summarizes the results of these analyses for sample types collected for all or most of the 18-year period. The objectives of this summary investigation were to identify long-term trends or significant year-to-year changes in radionuclide concentrations and, if possible, relate any observed changes in radionuclide concentrations to their sources and probable causes. Statistical techniques were employed to test for long-term trends. Conspicuous short-term changes in radionuclide concentrations were identified from inspection of the data. 30 refs., 16 figs., 4 tabs.

  7. Separation, fractionation concentration and drying of food products

    SciTech Connect

    Merlo, C.A.; Rose, W.W.; Pedersen, L.D.

    1989-08-01

    Tomato juice fractions and paste produced in an On-Site Study were subjected to a storage study. The fractions and paste were evaluated initially before storage, made into control and recombined purees, and the purees were evaluated. The purees were similar in viscosity, differed somewhat in color and syneresis. The paste and concentrated serum were stored 3 months at 40, 70, 90{degree}F; the pulp was frozen. After storage, control and recombined purees were made; the purees made from 70{degree}F stored paste or serum were thermally processed. These thermally processed purees were stored 3 months at 40, 70, 90{degree}F. After storage, the recombined purees stored at 70 and 90{degree}F showed a viscosity loss within 0.1--0.3 cm of the viscosity loss of the control purees. 19 refs., 16 figs., 20 tabs.

  8. Alpha-beta radiation detector

    DOEpatents

    Fleming, D.M.; Simmons, K.L.; Froelich, T.J.; Carter, G.L.

    1998-08-18

    The invention is based in part on the discovery that a plastic housing that is lightweight is surprisingly efficient inasmuch as background signals from any gamma radiation are significantly reduced by using a plastic housing instead of a metal housing. A further aspect of the present invention is the profile of the housing as a bi-linear approximation to a parabola resulting in full optical response from any location on the scintillation material to the photomultiplier tube. A yet further aspect of the present invention is that the survey probe is resistant to magnetic fields. A yet further aspect of the present invention is the use of a snap-fit retaining bracket that overcomes the need for multiple screws. 16 figs.

  9. Petroleum supply monthly, May 1998, with data for March 1998

    SciTech Connect

    1998-05-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 16 figs., 66 tabs.

  10. Theory-based transport simulations of TFTR L-mode temperature profiles

    SciTech Connect

    Bateman, G.

    1991-10-24

    The temperature profiles from a selection of TFTR L-mode discharges are simulated with the 1-1/2-D BALDUR transport code using a combination of theoretically derived transport models, called the Multi-Mode Model. The present version of the Multi-Mode Model consists of effective thermal diffusivities resulting from trapped electron modes and ion temperature gradient ({eta}{sub i}) modes, which dominate in the core of the plasma, together with resistive ballooning modes, which dominate in the periphery. Within the context of this transport model and the TFTR simulations reported here, the scaling of confinement with heating power comes from the temperature dependence of the {eta}{sub i} and trapped electron modes, while the scaling with current comes mostly from resistive ballooning modes. 24 refs., 16 figs., 3 tabs.

  11. Remote information service access system based on a client-server-service model

    DOEpatents

    Konrad, A.M.

    1997-12-09

    A local host computing system, a remote host computing system as connected by a network, and service functionalities: a human interface service functionality, a starter service functionality, and a desired utility service functionality, and a Client-Server-Service (CSS) model is imposed on each service functionality. In one embodiment, this results in nine logical components and three physical components (a local host, a remote host, and an intervening network), where two of the logical components are integrated into one Remote Object Client component, and that Remote Object Client component and the other seven logical components are deployed among the local host and remote host in a manner which eases compatibility and upgrade problems, and provides an illusion to a user that a desired utility service supported on a remote host resides locally on the user`s local host, thereby providing ease of use and minimal software maintenance for users of that remote service. 16 figs.

  12. Remote information service access system based on a client-server-service model

    DOEpatents

    Konrad, A.M.

    1996-08-06

    A local host computing system, a remote host computing system as connected by a network, and service functionalities: a human interface service functionality, a starter service functionality, and a desired utility service functionality, and a Client-Server-Service (CSS) model is imposed on each service functionality. In one embodiment, this results in nine logical components and three physical components (a local host, a remote host, and an intervening network), where two of the logical components are integrated into one Remote Object Client component, and that Remote Object Client component and the other seven logical components are deployed among the local host and remote host in a manner which eases compatibility and upgrade problems, and provides an illusion to a user that a desired utility service supported on a remote host resides locally on the user`s local host, thereby providing ease of use and minimal software maintenance for users of that remote service. 16 figs.

  13. Dynamical processes in heavy ion reactions

    SciTech Connect

    Blann, M.; Remington, B.A.

    1988-07-25

    In this report I review the physical assumptions of the Boltzmann Master Equation (BME). Comparisons of the model with experimental neutron spectra gated on evaporation residues for a range of incident projectile energies and masses are presented; next, I compare n spectra gated on projectile-like fragments, followed by comparisons with ungated, inclusive proton spectra. I will then consider secondary effects from the nucleon-nucleon processes involved in the heavy ion relaxation processes, specifically the high energy ..gamma..-rays which have been observed at energies up to 140 MeV in collisions of heavy ions of 20/endash/84 MeV/..mu... Another secondary effect, subthreshold pion production, was covered in the XVII School and will not be repeated. 39 refs., 16 figs.

  14. Measurement of the optical performance of liquid scintillator filled Teflon-fiber tubes

    SciTech Connect

    Zaman, S.M.

    1990-05-01

    A study of the optical performance of a liquid scintillator (BC517L) filled Teflon tube of inner diameter 0.06 cm, was carried out using a rectangular array of those tubes. Two experimental methods, the cosmic ray telescope and the direct scouce method, were used in measuring the light output (in photoelectrons) and the light attenuation length through the scintillator. Results showed the light output from this array for minimum ionizing charged particles to ba a fraction of a photoelectron (about 10{sup {minus}2}) and the attenuation length to be about 20.0 cm, for high energy particles, suggesting a limiting value for the tube diameter of the Teflon that can be used in scintillating fiber calorimeters for high energy physics experiments. 18 refs., 16 figs., 4 tabs.

  15. Technical support for geopressured-geothermal well activities in Louisiana

    SciTech Connect

    Not Available

    1991-07-01

    Continuous recording microearthquake monitoring networks have been established around US Department of Energy (DOE) geopressured-geothermal design wells in southwestern Louisiana and southeastern Texas since summer 1980 to assess the effects well development may have had on subsidence and growth-fault activation. This monitoring has shown several unusual characteristics of Gulf Coast seismic activity. The observed activity is classified into two dominant types, one with identifiable body phases (type 1) and the other with only surface-wave signatures (type 2). During this reporting period no type 1 or body-wave events were reported. A total of 230 type 2 or surface-wave events were recorded. Origins of the type 2 events are still not positively understood; however, little or no evidence is available to connect them with geopressured-geothermal well activity. We continue to suspect sonic booms from military aircraft or some other human-induced source. 37 refs., 16 figs., 6 tabs.

  16. Monitoring of Downstream Salmon and Steelhead at Federal Hydroelectric Facilities, 1996 Annual Report.

    SciTech Connect

    Martinson, Rick D.; Kamps, Jeffrey W.; Graves, Ritchie J.

    1997-08-01

    The seaward migration of juvenile salmonids was monitored by the National Marine Fisheries Service (NMFS) at Bonneville and John Day Dams on the Columbia River in 1996 The NMFS Smolt Monitoring Project is part of a larger Smolt Monitoring Program (SMP) coordinated by the Fish Passage Center (FPC) for the Columbia Basin Fish and Wildlife Authority. The purpose of the SMP is to monitor the migration of the juvenile salmonid stocks in the Columbia basin and make flow and spill recommendations designed to facilitate fish passage. Data are also used for travel time, migration timing, and relative run size analysis. The purpose of the NMFS portion of the program is to provide the FPC with species and project specific real time data from John Day and Bonneville Dams. Monitoring data collected included: river conditions; total numbers of fish; numbers of fry, adult salmon, and incidental catch; daily and seasonal passage patterns; and fish condition. 10 refs., 16 figs., 5 tabs.

  17. Nine-year aging behavior of the ceramic flatpack resonator

    SciTech Connect

    Beetley, D.E.

    1990-03-06

    GE has developed a multichannel, high precision aging{asterisk} measurement facility capable of high volume testing of resonators. Features of the facility considered unique for production aging systems test include: (1) Loran-C/disciplined time-frequency (DTF) oscillator frequency standard, (2) direct current power bus design, (3) measurement and switching techniques, and (4) high volume automatic precision resonator aging. Computer-controlled data acquisition is used for unattended operation. Facility requirements included frequency measurement with sufficient precision to allow 20- year extrapolation of resonator frequency shift using 30 data points. The frequency reference is traceable to the National Institute of Standards and Technology (NIST). Long-term extrapolation required selection of a model which would most accurately reflect the major processes involved in aging. In order to verify the accuracy of model extrapolation, a group of resonators has been maintained in test for more than nine years. 9 refs., 16 figs.

  18. An aerial radiological survey of the West Valley Demonstration Project and surrounding area, West Valley, New York

    SciTech Connect

    Berry, H.A.

    1991-09-01

    An aerial radiological survey of the West Valley Demonstration Project and the surrounding area was conducted from mid-August through early September 1984 by EG G Energy Measurements, Inc. for the United States Department of Energy. The radiological survey was part of the United States Department of Energy Comprehensive Integrated Remote Sensing (CIRS) program, which provides state-of-the-art remote sensing to support the needs of the various DOE facilities. The survey consisted of airborne measurements of both natural and man-made gamma radiation emanating from the terrestrial surface. These measurements allowed an estimate of the distribution of isotopic concentrations in the area surrounding the project site. Results are reported as isopleths superimposed on aerial photographs of the area. Gamma ray energy spectra are also presented for the net man-made radionuclides. 8 refs., 16 figs., 9 tabs.

  19. Phenodynamics of production and chemical pools in mayapple and flowering dogwood

    SciTech Connect

    Taylor, F.G. Jr.

    1991-01-01

    The objective of this study is to provide an understanding of the seasonality of biomass production and chemical storage among selected forest species as an aid to the analysis and management of a forest ecosystem model. The specific goals to accomplish the objectives included: (1) the construction of phenological calendars to be superimposed on the civil calendar, such that the seasons of the year are not marked by calendar dates but rather by dated groups of phenological events; (2) to develop a capability to predict onset of the generative phase (flowering) from heat unit summation methods; (3) to illustrate the role of phenology to biomass production and chemical storage in two indicator species, mayapple and flowering dogwood; and (4) to develop the capability to predict aboveground and below ground standing crop biomass in dogwood. Observations in this study focused on the generative phases (flowering) of individual plants and colonies of plants as indicators of productivity. 16 figs., 11 tabs.

  20. Spontaneous emergence of a metabolism

    SciTech Connect

    Bagley, R.J.; Farmer, J.D. Santa Fe Inst., NM )

    1990-01-01

    Networks of catalyzed reactions with nonlinear feedback have been proposed to play an important role in the origin of life. We investigate this possibility in a polymer chemistry with catalyzed cleavage and condensation reactions. We study the properties of a well-stirred reactor driven away from equilibrium by the flow of mass. Under appropriate non-equilibrium conditions. The nonlinear feedback of the reaction network focuses the material of the system into a few specific polymer species. The network of catalytic reactions digests'' the material of its environment, incorporating it into its own form. We call the result an autocatalytic metabolism. Under some variations it persists almost unchanged, while in other cases it dies. We argue that the dynamical stability of autocatalytic metabolisms gives them regenerative properties that allow them to repair themselves and to propagate through time. 43 refs., 16 figs., 3 tabs.

  1. Method of holding optical elements without deformation during their fabrication

    DOEpatents

    Hed, P.P.

    1997-04-29

    An improved method for securing and removing an optical element to and from a blocking tool without causing deformation of the optical element is disclosed. A lens tissue is placed on the top surface of the blocking tool. Dots of UV cement are applied to the lens tissue without any of the dots contacting each other. An optical element is placed on top of the blocking tool with the lens tissue sandwiched therebetween. The UV cement is then cured. After subsequent fabrication steps, the bonded blocking tool, lens tissue, and optical element are placed in a debonding solution to soften the UV cement. The optical element is then removed from the blocking tool. 16 figs.

  2. A flammability and combustion model for integrated accident analysis. [Advanced light water reactors

    SciTech Connect

    Plys, M.G.; Astleford, R.D.; Epstein, M. )

    1988-01-01

    A model for flammability characteristics and combustion of hydrogen and carbon monoxide mixtures is presented for application to severe accident analysis of Advanced Light Water Reactors (ALWR's). Flammability of general mixtures for thermodynamic conditions anticipated during a severe accident is quantified with a new correlation technique applied to data for several fuel and inertant mixtures and using accepted methods for combining these data. Combustion behavior is quantified by a mechanistic model consisting of a continuity and momentum balance for the burned gases, and considering an uncertainty parameter to match the idealized process to experiment. Benchmarks against experiment demonstrate the validity of this approach for a single recommended value of the flame flux multiplier parameter. The models presented here are equally applicable to analysis of current LWR's. 21 refs., 16 figs., 6 tabs.

  3. Oil and gas developments in the Far East in 1987

    SciTech Connect

    Courteney, S.; Soeparjadi, R.A.; Ahmad, S.M.S.

    1988-10-01

    As a result of the stabilization of oil prices in 1987 following their collapse in 1986, the rate of slowdown in Far East exploration activities began to ease. Seismic acquisition increased slightly, and the fall in exploratory drilling was less dramatic in 1987 than in 1986. No major discoveries were reported during 1987, although small-to-medium-size oil and gas discoveries added to the potential reserves of Bangladesh, India, Indonesia, Japan, People's Republic of China, Pakistan, Republic of China, and Thailand. Development drilling continued to rise by a modest amount. Far East oil and condensate production decreased in 1987 by just over 1% to 5.37 million b/d, whereas gas output rose to 11.7 bcf/day. New acreage awards were significantly higher in 1987 than in 1986, particularly in some of the region's key producing countries. 16 figs., 11 tabs.

  4. Early and continuing effects of combined alpha and beta irradiation of the lung:

    SciTech Connect

    Scott, B.R.; Hahn, F.F.; Snipes, M.B.; Newton, G.J.; Eidson, A.F.; Mauderly, J.L.; Boecker, B.B.

    1988-03-01

    This report summarizes an inhalation exposure experiment that concerns early and continuing effects of combined alpha and beta irradiation of the lung of rats. Both morbidity at 18 months and mortality within 18 months after exposure were examined for rats exposed to the beta-emitter /sup 147/Pm, the alpha-emitter /sup 238/Pu, or both combined. The results were used to validate hazard-function models that were developed (1)for pulmonary functional morbidity at 18 months and (2) for lethality from radiation pneumonitis and pulmonary fibrosis within 18 months. Both models were found to adequately predict the experimental observations after combined chronic alpha and beta irradiation of the lung. A relative biological effectiveness of approximately 7 was obtained for /sup 238/Pu alpha radiation compared to /sup 147/Pm beta radiation for both pulmonary functional morbidity and lethality from radiation pneumonitis and pulmonary fibrosis. 12 refs., 16 figs., 11 tabs.

  5. Sampling, characterization, and remote sensing of aerosols formed in the atmospheric hydrolysis of uranium hexafluoride

    SciTech Connect

    Bostick, W.D.; McCulla, W.H.; Pickrell, P.W.

    1984-05-01

    When gaseous uranium hexafluoride (UF/sub 6/) is released into the atmosphere, it rapidly reacts with ambient moisture to form an aerosol of uranyl fluoride (UO/sub 2/F/sub 2/) and hydrogen fluoride (HF). As part of our Safety Analysis program, we have performed several experimental releases of HF/sub 6/ in contained volumes in order to investigate techniques for sampling and characterizing the aerosol materials. The aggregate particle morphology and size distribution have been found to be dependent upon several conditions, including the temperature of the UF/sub 6/ at the time of its release, the relative humidity of the air into which it is released, and the elapsed time after the release. Aerosol composition and settling rate have been investigated using stationary samplers for the separate collection of UO/sub 2/F/sub 2/ and HF and via laser spectroscopic remote sensing (Mie scatter and infrared spectroscopy). 25 refs., 16 figs., 5 tabs.

  6. Natural gas monthly, October 1991

    SciTech Connect

    Not Available

    1991-11-05

    The Natural Gas Monthly (NGM) is prepared in the Data Operations Branch of the Reserves and Natural Gas Division, Office of Oil and Gas, Energy Information Administration (EIA), US Department of Energy (DOE). The NGM highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. The data in this publication are collected on surveys conducted by the EIA to fulfill its responsibilities for gathering and reporting energy data. Some of the data are collected under the authority of the Federal Energy Regulatory Commission (FERC), an independent commission within the DOE, which has jurisdiction primarily in the regulation of electric utilities and the interstate natural gas industry. Geographic coverage is the 50 States and the District of Columbia. 16 figs., 33 tabs.

  7. Office of Analysis and Evaluation of Operational Data 1989 annual report, Power reactors

    SciTech Connect

    1990-07-01

    The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1989. The report is published in two separate parts. This document, NUREG-1272, Vol. 4, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. This report also compiles the status of staff actions resulting from previous Incident Investigation Team (IIT) reports. 16 figs., 9 tabs.

  8. A haptic system for a multifingered hand

    SciTech Connect

    Stansfield, S.A.

    1990-01-01

    In this paper we present a series of haptic exploratory procedures, or EPs, implemented for a multi-fingered, articulated, sensate robot hand. These EPs are designed to extract specific tactile and kinesthetic information from an object via their purposive invocation by an intelligent robotic system. Taken together, they form an active robotic touch perception system to be used both in extracting information about the environment for internal representation and in acquiring grasps for manipulation. The haptic system presented utilizes an integrated robotic system consisting of a PUMA 560 robot arm, a JPL/Stanford robot hand, with joint torque sensing in the fingers, a wrist force/torque sensor, and a 256 element, spatially-resolved fingertip tactile array. We describe the EPs implemented for this system and provide experimental results which illustrate how they function. A final example demonstrates how the information extracted may be used. 13 refs., 16 figs.

  9. Oak Ridge Reservation environmental report for 1989

    SciTech Connect

    Jacobs, V.A.; Wilson, A.R.

    1990-10-01

    The first two volumes of this report are devoted to a presentation of environmental data and supporting narratives for the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) and surrounding environs during 1989. Volume 1 includes all narrative descriptions, summaries, and conclusions and is intended to be a stand-alone'' report for the ORR for the reader who does not want to review in detail all of the 1989 data. Volume 2 includes the detailed data summarized in a format to ensure that all environmental data are represented in the tables. Narratives are not included in Vol. 2. The tables in Vol. 2 are addressed in Vol. 1. For this reason, Vol. 2 cannot be considered a stand-alone report but is intended to be used in conjunction with Vol. 1. 16 figs., 194 tabs.

  10. Feasibility study for a transportation operations system cask maintenance facility

    SciTech Connect

    Rennich, M.J.; Medley, L.G.; Attaway, C.R.

    1991-01-01

    The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a waste management program for the disposition of spent nuclear fuel (SNF) and high-level waste (HLW). The program will include a transportation system for moving the nuclear waste from the sources to a geologic repository for permanent disposal. Specially designed casks will be used to safely transport the waste. The cask systems must be operated within limits imposed by DOE, the Nuclear Regulatory Commission (NRC), and the Department of Transportation (DOT). A dedicated facility for inspecting, testing, and maintaining the cask systems was recommended by the General Accounting Office (in 1979) as the best means of assuring their operational effectiveness and safety, as well as regulatory compliance. In November of 1987, OCRWM requested a feasibility study be made of a Cask Maintenance Facility (CMF) that would perform the required functions. 46 refs., 16 figs., 13 tabs.

  11. A study of the propagation of ulf electromagnetic fields in collisional, inhomogeneous, magnetized plasmas

    SciTech Connect

    Borovsky, J.E.

    1987-02-01

    The propagation of ultralow-frequency (ulf) electromagnetic signals (Alfven and magnetosonic waves) in collisional, inhomogeneous, magnetized plasmas is analyzed by numerical simulation. The problem is formulated from a Maxwell-equation orbit-theory approach rather than from a magnetohydrodynamic point of view, and the problem is numerically treated in a fully time-dependent manner. Boundary-value-problem behavior is distinguished from initial-value-problem behavior. The propagation of two-dimensional small-amplitude electromagnetic disturbances in plasmas with spatially dependent densities and in plasmas with spatially dependent conductivities is numerically simulated, and when possible, the simulations are compared with theory. Changes in the plasma density lead to changes in the signal speed and to reflections; collisions lead to changes in the signal speed, to reflections, and to attenuations. Theoretical descriptions based upon discontinuities in the media are generally incorrect in predicting the amplitudes of signals reflected from plasma inhomogeneities. 19 refs., 16 figs.

  12. Separation of non-hazardous, non-radioactive components from ICPP calcine via chlorination

    SciTech Connect

    Nelson, L.O.

    1995-05-01

    A pyrochemical treatment method for separating non-radioactive from radioactive components in solid granular waste accumulated at the Idaho Chemical Processing Plant was investigated. The goal of this study was to obtain kinetic and chemical separation data on the reaction products of the chlorination of the solid waste, known as calcine. Thermodynamic equilibrium calculations were completed to verify that a separation of radioactive and non-radioactive calcine components was possible. Bench-scale chlorination experiments were completed subsequently in a variety of reactor configurations including: a fixed-bed reactor (reactive gases flowed around and not through the particle bed), a packed/fluidized-bed reactor, and a packed-bed reactor (reactive gases flowed through the particle bed). Chemical analysis of the reaction products generated during the chlorination experiments verified the predictions made by the equilibrium calculations. An empirical first-order kinetic rate expression was developed for each of the reactor configurations. 20 refs., 16 figs., 21 tabs.

  13. Glow discharge techniques for conditioning high vacuum systems

    SciTech Connect

    Dylla, H.F.

    1988-03-01

    A review is given of glow discharge techniques which are useful for conditioning vacuum vessels for high vacuum applications. Substantial development of glow discharge techniques has been done for the purpose of in-situ conditioning of the large ultrahigh vacuum systems for particle accelerators and magnetic fusion devices. In these applications the glow discharge treatments remove impurities from vessel surfaces in order to minimize particle-induced desorption coefficients. Cleaning mechanisms involve a mixture of sputtering and ion- (or neutral) induced desorption effects depending on the gas mixture (ArO/sub 2/ vs. H/sub 2/) and excitation method (DC, RF, and ECR). The author will review the methodology of glow discharge conditioning, diagnostic measurements provided by residual gas and surface composition analysis, and applications to vessel conditioning and materials processing. 76 refs., 16 figs.

  14. Surfactant screening of diesel-contaminated soil

    SciTech Connect

    Peters, R.W.; Montemagno, C.D.; Shem, L. ); Lewis, B.A. . Dept. of Civil Engineering)

    1990-01-01

    At one installation, approximately 60,000 gal of No. 2 diesel fuel leaked into the subsurface environment, with contamination at depths of 6 to 34 m below the surface. Argonne National Laboratory was contracted to perform treatability studies for site remediation. The treatability studies focused on four separate phases: (1) leachability studies on the various contaminated soil borings, (2) air stripping studies, (3) bioremediation studies, and (4) surfactant screening/surfactant flooding studies. This paper summarizes the fourth phase of the research program in which twenty-one surfactants were screened for possible use to mobilize the organics from the contaminated soil prior to bioremediation. Anionic surfactants resulted in the greatest degree of diesel mobilization. The most promising surfactants will be employed on actual contaminated soil samples obtained from the site. 18 refs., 16 figs., 1 tab.

  15. Processes to remove acid forming gases from exhaust gases

    DOEpatents

    Chang, S.G.

    1994-09-20

    The present invention relates to a process for reducing the concentration of NO in a gas, which process comprises: (A) contacting a gas sample containing NO with a gaseous oxidizing agent to oxidize the NO to NO[sub 2]; (B) contacting the gas sample of step (A) comprising NO[sub 2] with an aqueous reagent of bisulfite/sulfite and a compound selected from urea, sulfamic acid, hydrazinium ion, hydrazoic acid, nitroaniline, sulfanilamide, sulfanilic acid, mercaptopropanoic acid, mercaptosuccinic acid, cysteine or combinations thereof at between about 0 and 100 C at a pH of between about 1 and 7 for between about 0.01 and 60 sec; and (C) optionally contacting the reaction product of step (A) with conventional chemical reagents to reduce the concentrations of the organic products of the reaction in step (B) to environmentally acceptable levels. Urea or sulfamic acid are preferred, especially sulfamic acid, and step (C) is not necessary or performed. 16 figs.

  16. International Energy Outlook 1991: A post-war review of energy markets

    SciTech Connect

    Not Available

    1991-06-01

    This report presents the current Energy Information Administration (EIA) assessment of the long-term outlook for international energy markets. The report is provided, as are other EIA reports, as a statistical service for use by managers and international energy analysts and not as a government energy plan. Current United States Government policies and foreign government policies are assumed to hold over the projection interval, which extends to the year 2010. The Persian Gulf war has a profound impact on world energy markets during the last several months and will continue to influence these markets to some degree in the future, particularly the world oil market. This report pays particular attention to post-war prospects for world oil markets and, as a result, contains domestic energy projections and world oil price projections that differ somewhat from those published in the Annual Energy Outlook 1991 (AEO). These differences are discussed in this report. 16 figs., 12 tabs.

  17. Strengthening mechanisms of tungsten powder reinforced uranium

    SciTech Connect

    Lewis, M.A.K.; Hill, M.A.; Rollett, A.D.; Dunn, P.S.; Mortensen, A.; Massachusetts Inst. of Tech., Cambridge, MA )

    1989-01-01

    Tungsten powder reinforced uranium exhibits a three-fold increase in yield strength due to precipitation hardening. The tungsten-rich interphase precipitates form at moving phase boundaries during slow cooling. Further increases in yield strength, attained with increasing tungsten content, are due to composite strengthening; this is verified by increasing elastic modulus with increasing tungsten content. Age hardening behavior is observed, with strengthening occurring at aging temperatures low in the alpha phase. Aging higher in alpha gives initial strengthening followed by rapid overaging. Beta phase aging results in a very soft structure with precipitates visible optically. Wrought material exhibits significant strain hardening as well as composite strengthening due to elongation of the tungsten particles. 7 refs., 15 figs., 4 tabs.

  18. Detoxification and generation of useful products from coal combustion wastes

    SciTech Connect

    Not Available

    1990-11-21

    Electric utilities are on the brink of a new era in waste disposal problems. This research project addresses the issue of how to effectively dispose of flyash, bottom ash, desulfurization sludge through the generation of chemically-hardened material that could potentially be used as a cement or as a synthetic aggregate. The specific goals of this study were: (1) to study the hardness of mixtures of flyash, bottom ash, and DSG treated with lime and other hardening agents; (2) to determine the optimum solids content, setting time, moisture content, and post setting treatments that will yield the greatest strength and hardness out of these mixtures; and (3) to determine the leachability of the synthetic material as a measure of its ability to retain absorbed and/or entrained toxic metals. 50 refs., 15 figs., 8 tabs.

  19. Surface treatment of magnetic recording heads

    DOEpatents

    Komvopoulos, K.; Brown, I.G.; Wei, B.; Anders, S.; Anders, A.; Bhatia, S.C.

    1995-12-19

    Surface modification of magnetic recording heads using plasma immersion ion implantation and deposition is disclosed. This method may be carried out using a vacuum arc deposition system with a metallic or carbon cathode. By operating a plasma gun in a long-pulse mode and biasing the substrate holder with short pulses of a high negative voltage, direct ion implantation, recoil implantation, and surface deposition are combined to modify the near-surface regions of the head or substrate in processing times which may be less than 5 min. The modified regions are atomically mixed into the substrate. This surface modification improves the surface smoothness and hardness and enhances the tribological characteristics under conditions of contact-start-stop and continuous sliding. These results are obtained while maintaining original tolerances. 15 figs.

  20. Diagenesis and fluid evolution of deeply buried Permian (Rotliegende) gas reservoirs, Northwest Germany

    SciTech Connect

    Gaupp, R. ); Matter, A.; Ramseyer, K.; Platt, J. ); Walzebuck, J. )

    1993-07-01

    Depositional environment and tectonic setting were important in the diagenesis and evolution of reservoir properties in the Rotliegende sequence of the North German Basin. Facies belts paralleling the edge of a central saline lake controlled the distribution of early and shallow burial cements. Lake shoreline sands with radial chlorite cement show the best reservoir properties in the study area. Juxtaposition of Rotliegende deposits against either Carboniferous Coal Measures or Late Permian (Zechstein) evaporites by faulting resulted in cross-formational fluid exchange. The introduction of fluids from Carboniferous Coal Measures into Rotliegende reservoirs produced intense clay cementation, significantly reducing rock permeabilities. Influx of Zechstein fluids favored precipitation of late carbonate and anhydrite cements. Cross-formational and fault-related fluid flow was enhanced during periods of fault activity. 50 refs., 15 figs., 1 tab.

  1. Quarterly Briefing Book on Environmental and Waste Management Activities

    SciTech Connect

    Brown, M.C.

    1991-06-01

    The purpose of the Quarterly Briefing Book on Environmental and Waste Management Activities is to provide managers and senior staff at the US Department of Energy-Richland Operations Office and its contractors with timely and concise information on Hanford Site environmental and waste management activities. Each edition updates the information on the topics in the previous edition, deletes those determined not to be of current interest, and adds new topics to keep up to date with changing environmental and waste management requirements and issues. Section A covers current waste management and environmental restoration issues. In Section B are writeups on national or site-wide environmental and waste management topics. Section C has writeups on program- and waste-specific environmental and waste management topics. Section D provides information on waste sites and inventories on the site. 15 figs., 4 tabs.

  2. Comparison of shock severity measures

    SciTech Connect

    Baca, T.J.

    1989-01-01

    In an effort to clarify the issues associated with quantifying shock severity, this paper compares the merits of two measures of shock severity. The first measure is the widely used absolute acceleration shock response spectrum (SAA). The second measure of shock severity is relatively new and is known as the shock intensity spectrum (SIS). Overall information content of SAA and SIS spectra are compared and discussed in the context of two shock excitations having known amplitude, duration, and frequency content. The first is a burst of band-limited white noise and the second is a classical haversine pulse. After describing both the SAA and SIS shock measures, numerous examples are described which emphasize the strengths and limitations of each shock characterization method. This discussion reveals how the use of different shock measures may alter an engineer's conclusions about relative shock severity between two shock environments. 8 refs., 15 figs.

  3. Genes and gene expression: Localization, damage and control -- A multilevel and inter-disciplinary study

    SciTech Connect

    Ts'o, P.O.P.

    1990-09-01

    All projects are working toward a goal for describing the three dimensional nuclear topography in terms of relative spatial relationships among genes (specific DNA sequence). Methods are now being perfected to detect these genes, quantitatively and spatially, to perturb these genes specifically, and to measure the perturbation in order to assure specificity. We are developing methods to assay, after perturbation of the target DNA within living cells, whether or not only the target sequence are attacked while other sequences remain unharmed. We are now at the stage to do chemical gene modification or masking within living cells in a strictly sequence-specific manner. Soon, we will be able to study the function and the physical location of each gene in living cells with exquisite specificity. 25 refs., 15 figs.

  4. Geothermal demonstration: Zunil food dehydration facility

    SciTech Connect

    Maldonado, O. ); Altseimer, J.; Thayer, G.R. ); Cooper, L. ); Caicedo, A. . Inst. Nacional de Electrificacion)

    1991-08-01

    A food dehydration facility was constructed near the town of Zunil, Guatemala, to demonstrate the use of geothermal energy for industrial applications. The facility, with some modifications to the design, was found to work quite satisfactorily. Tests using five different products were completed during the time geothermal energy was used in the plant. During the time the plant was not able to use geothermal energy, a temporary diesel-fueled boiler provided the energy to test dehydration on seven other crops available in this area. The system demonstrates that geothermal heat can be used successfully for dehydrating food products. Many other industrial applications of geothermal energy could be considered for Zunil since a considerable amount of moderate-temperature heat will become available when the planned geothermal electrical facility is constructed there. 6 refs., 15 figs., 7 tabs.

  5. Workshops and problems for benchmarking eddy current codes

    SciTech Connect

    Turner, L.R.; Davey, K.; Ida, N.; Rodger, D.; Kameari, A.; Bossavit, A.; Emson, C.R.I.

    1988-08-01

    A series of six workshops was held in 1986 and 1987 to compare eddy current codes, using six benchmark problems. The problems included transient and steady-state ac magnetic fields, close and far boundary conditions, magnetic and non-magnetic materials. All the problems were based either on experiments or on geometries that can be solved analytically. The workshops and solutions to the problems are described. Results show that many different methods and formulations give satisfactory solutions, and that in many cases reduced dimensionality or coarse discretization can give acceptable results while reducing the computer time required. A second two-year series of TEAM (Testing Electromagnetic Analysis Methods) workshops, using six more problems, is underway. 12 refs., 15 figs., 4 tabs.

  6. An assessment of the risk significance of human errors in selected PSAs and operating events

    SciTech Connect

    Palla, R.L. Jr.; El-Bassioni, A. . Office of Nuclear Reactor Regulation); Higgins, J. )

    1991-01-01

    Sensitivity studies based on Probabilistic Safety Assessments (PSAs) for a pressurized water reactor and a boiling water reactor are described. In each case human errors modeled in the PSAs were categorized according to such factors as error type, location, timing, and plant personnel involved. Sensitivity studies were then conducted by varying the error rates in each category and evaluating the corresponding change in total core damage frequency and accident sequence frequency. Insights obtained are discussed and reasons for differences in risk sensitivity between plants are explored. A separate investigation into the role of human error in risk-important operating events is also described. This investigation involved the analysis of data from the USNRC Accident Sequence Precursor program to determine the effect of operator-initiated events on accident precursor trends, and to determine whether improved training can be correlated to current trends. The findings of this study are also presented. 5 refs., 15 figs., 1 tab.

  7. Time-dependent simulations of a Compact Ignition Tokamak

    SciTech Connect

    Stotler, D.P.; Bateman, G.

    1988-05-01

    Detailed simulations of the Compact Ignition Tokamak are carried out using a 1-1/2-D transport code. The calculations include time-varying densities, fields, and plasma shape. It is shown that ignition can be achieved in this device if somewhat better than L-mode energy confinement time scaling is possible. We also conclude that the performance of such a compact, short-pulse device can depend greatly on how the plasma is evolved to its flat-top parameters. Furthermore, in cases such as the ones discussed here, where there is not a great deal of ignition margin and the electron density is held constant, ignition ends if the helium ash is not removed. In general, control of the deuterium--tritium density is equivalent to burn control. 48 refs., 15 figs.

  8. Mechanical properties of Alloy 718 in a gas-cooled reactor environment

    SciTech Connect

    McCoy, H.E.

    1987-10-01

    A brief program was run to evaluate Alloy 718 for high-temperature gas-cooled reactor (HTGR) applications. The testing included short-term tensile tests, impact tests, and creep tests. Samples were aged to 30,000 h at 593 and 649{degree}C in HTGR-He before testing. Short-term tensile tests showed that aging at 593{degree}C resulted in further hardening; aging at 649{degree}C resulted in some softening. The impact energy decreased with aging at both temperatures, with a slight recovery of the loss after very long aging times. Creep results obtained in HTGR-He agreed with data from other sources in which tests had been run in air. Thus, there is no detectable effect of the HTGR-He environment on creep behavior. Carbon analyses of test specimens did not reveal any evidence of carburization at 593 or 649{degree}C. 5 refs., 15 figs., 3 tabs.

  9. What can HELIOS tell us on phase transition of nuclear matter

    SciTech Connect

    En'yo, H.

    1987-01-01

    Transverse energy (E/sub t/) distributions and P/sub t/ spectra of negative particles and photons measured by the HELIOS experiment in 200 GeVN and 60 GeVN oxygen-nucleus reactions are presented. The E/sub t/ distributions are compared to a geometrical parametrization and a Montereverse arrowCarlo calculation, particle spectra to the proton-nucleus reaction case. The comparisons show that yet the results can be understood without assuming quark-gluon plasma formation. A discussion is made based on these comparisons together with an estimate of the energy density of the reaction, attempting to know how close we are to the detection of a phase transition of nuclear matter. 21 refs., 15 figs.

  10. Neutron collar calibration and evaluation for assay of LWR fuel assemblies containing burnable neutron absorbers

    SciTech Connect

    Henriksen, P.W.; Menlove, H.O.; Stewart, J.E.; Qiao, S.Z.; Wenz, T.R. ); Verrecchia, G.P.D. . Safeguards Directorate)

    1990-11-01

    The neutron coincidence collar is used to verify the uranium content in light water reactor fuel assemblies. An AmLi neutron source actively interrogates the fuel assembly to measure the {sup 235}U content and the {sup 238}U content can be verified from a passive neutron coincidence measurement. This report gives the collar calibration data for pressurized water reactor (PWR) and boiling water reactor (BWR) fuel assemblies both with and without cadmium liners. Calibration curves and correction factors are presented for neutron absorbers (burnable poisons) and various fuel assembly sizes. The data were collected using the Los Alamos BWR and PWR test assemblies as well as fuel assemblies from several fuel fabrication facilities. 11 refs., 15 figs., 14 tabs.

  11. Analyzing geographic clustered response

    SciTech Connect

    Merrill, D.W.; Selvin, S.; Mohr, M.S.

    1991-08-01

    In the study of geographic disease clusters, an alternative to traditional methods based on rates is to analyze case locations on a transformed map in which population density is everywhere equal. Although the analyst's task is thereby simplified, the specification of the density equalizing map projection (DEMP) itself is not simple and continues to be the subject of considerable research. Here a new DEMP algorithm is described, which avoids some of the difficulties of earlier approaches. The new algorithm (a) avoids illegal overlapping of transformed polygons; (b) finds the unique solution that minimizes map distortion; (c) provides constant magnification over each map polygon; (d) defines a continuous transformation over the entire map domain; (e) defines an inverse transformation; (f) can accept optional constraints such as fixed boundaries; and (g) can use commercially supported minimization software. Work is continuing to improve computing efficiency and improve the algorithm. 21 refs., 15 figs., 2 tabs.

  12. An overview of BWR Mark-1 containment venting risk implications: An evaluation of potential Mark-1 containment improvements

    SciTech Connect

    Wagner, K.C.; Dallman, R.J.; Galyean, W.J.

    1989-06-01

    This report supplements containment venting risk evaluations performed for the Mark-I Containment Performance Improvement (CPI) Program. Quantitative evaluations using simplified containment event trees for station blackout sequences were performed to evaluate potential risk reduction offered by containment venting, and improved automatic depressurization system with a dedicated power source, and an additional supply of water to either the containment sprays or the vessel with a dedicated power source. The risk calculations were based on the Draft NUREG-1150 results for Peach Bottom with selected enhancements. Several sensitivity studies were performed to investigate phenomenological, operational, and equipment performance uncertainties. Qualitative risk evaluations were provided for loss of long-term containment heat removal and anticipated transients without scram for the same set of improvements. A limited discussion is provided on the generic applicability of these results to other plants with Mark-I containments. 23 refs., 15 figs., 13 tabs.

  13. Preconceptual design of the new production reactor circulator test facility

    SciTech Connect

    Thurston, G.

    1990-06-01

    This report presents the results of a study of a new circulator test facility for the New Production Reactor Modular High-Temperature Gas-Cooled Reactor. The report addresses the preconceptual design of a stand-alone test facility with all the required equipment to test the Main Circulator/shutoff valve and Shutdown Cooling Circulator/shutoff valve. Each type of circulator will be tested in its own full flow, full power helium test loop. Testing will cover the entire operating range of each unit. The loop will include a test vessel, in which the circulator/valve will be mounted, and external piping. The external flow piping will include a throttle valve, flowmeter, and heat exchanger. Subsystems will include helium handling, helium purification, and cooling water. A computer-based data acquisition and control system will be provided. The estimated costs for the design and construction of this facility are included. 2 refs., 15 figs.

  14. Sampling apparatus

    DOEpatents

    Gordon, N.R.; King, L.L.; Jackson, P.O.; Zulich, A.W.

    1989-07-18

    A sampling apparatus is provided for sampling substances from solid surfaces. The apparatus includes first and second elongated tubular bodies which telescopically and sealingly join relative to one another. An absorbent pad is mounted to the end of a rod which is slidably received through a passageway in the end of one of the joined bodies. The rod is preferably slidably and rotatably received through the passageway, yet provides a selective fluid tight seal relative thereto. A recess is formed in the rod. When the recess and passageway are positioned to be coincident, fluid is permitted to flow through the passageway and around the rod. The pad is preferably laterally orientable relative to the rod and foldably retractable to within one of the bodies. A solvent is provided for wetting of the pad and solubilizing or suspending the material being sampled from a particular surface. 15 figs.

  15. Superconducting magnetic coil

    DOEpatents

    Aized, D.; Schwall, R.E.

    1999-06-22

    A superconducting magnetic coil includes a plurality of sections positioned axially along the longitudinal axis of the coil, each section being formed of an anisotropic high temperature superconductor material wound about a longitudinal axis of the coil and having an associated critical current value that is dependent on the orientation of the magnetic field of the coil. The cross section of the superconductor, or the type of superconductor material, at sections along the axial and radial axes of the coil are changed to provide an increased critical current at those regions where the magnetic field is oriented more perpendicularly to the conductor plane, to thereby increase the critical current at these regions and to maintain an overall higher critical current of the coil. 15 figs.

  16. Recent developments in neutrino physics

    SciTech Connect

    Garvey, G.T.

    1991-01-01

    I shall attempt to summarize recent developments in the experimental situation in neutrino physics. The paper will deal with recent results, drawing on either published work or research that has been presented in preprint form, as there is an adequate supply of interesting and controversial data restricting oneself to these generally more reliable sources. The discussion of the theoretical implication of these experimental results will be presented in the following paper by Boris Kayser. The topics to be covered in this presentation are: direct measurements of {bar {nu}}{sub e} mass via beta endpoint studies; status of solar neutrino observations; status of 17-keV neutrino'' reports; and the use of {nu}p elastic scattering to determine the strange quark'' content of the proton. 2 refs., 15 figs., 9 tabs.

  17. Test and analysis results for two Synergy Power Corp. wind turbines

    SciTech Connect

    Davis, D.; Hansen, C.

    1996-12-31

    The testing and modeling of small (rotor diameter 10.3 m and 12.8 m) wind turbines is the subject of this paper. The paper focuses primarily on the ADAMS computer model for dynamic analysis. The code calculates design loads, optimizes tilt configuration, and helps to interpret test results. A comparison of some of the modeling predictions is made to test data for validation purposes. The ADAMS model was found to accurately predict performance characteristics and loads for free-tilting turbines. ADAMS was found to be relatively successful in modeling the free tilt and variable rotors. The model also showed that tilting behavior is dependent on the restoring moment from the rotor aerodynamics as well as on surface aerodynamics. The effects of changes in air density on the power curve, load predictions, and analysis of emergency stops were also performed satisfactorily with the model. 15 figs.

  18. ASP (AntiSubmarine Penetrator) base plate redesign and explosive bolt test

    SciTech Connect

    Cole, J.K.; Wolfe, W.P.

    1988-10-01

    This report presents the results of a post-flight investigation of the Rocket Antisubmarine Penetrator (RAP) tests of the AntiSubmarine Penetrator (ASP). It focuses on the cause for the premature deployment of the on-board recovery system and the failure of the base pressure transducers. As a result of the investigation, the base plate of the ASP vehicle was modified to increase its structural stiffness. Also, an instrumented test was conducted to assess the environment that is created when the three explosive bolts are activated to separate the vehicle from the interstage adapter and the rocket booster. The results of this test are presented and discussed. 5 refs., 15 figs.

  19. Electric power annual 1997. Volume 2

    SciTech Connect

    1998-10-01

    The Electric Power Annual 1997, Volume 2 contains annual summary statistics at national, regional, and state levels for the electric power industry, including information on both electric utilities and nonutility power producers. Included are data for electric utility retail sales of electricity, associated revenue, and average revenue per kilowatthour of electricity sold; financial statistics; environmental statistics; power transactions; and demand-side management. Also included are data for US nonutility power producers on installed capacity; gross generation; emissions; and supply and disposition of energy. The objective of the publication is to provide industry decisionmakers, government policymakers, analysts, and the general public with historical data that may be used in understanding US electricity markets. 15 figs., 62 tabs.

  20. Preliminary design for a pierce wiggler beamstick and addendum

    SciTech Connect

    Pirkle, D.

    1988-05-01

    Lawrence Livermore National Laboratory is developing a fast tunable microwave source for operation at 250 GHz and 10kW peak output power. This report presents the preliminary design of a Pierce gun and solenoid magnet that will be compatible with a Pierce-wiggler electron beam formation system (beamstick). The beamstick will be an appropriate power source for a tunable gyro-BWO at 250 GHz. Figure 1 presents the major components of the Pierce-wiggler beamstick: the electron gun, solenoid, beam tunnel, wiggler, and vacuum valve. Figure 2 shows an artistic conception of how the beamstick will interface with the interaction magnet, modulator and gyro-BWO circuit at MIT. 15 figs.

  1. Surface treatment of ceramic articles

    DOEpatents

    Komvopoulos, K.; Brown, I.G.; Wei, B.; Anders, S.; Anders, A.; Bhatia, C.S.

    1998-12-22

    A process is disclosed for producing an article with improved ceramic surface properties including providing an article having a ceramic surface, and placing the article onto a conductive substrate holder in a hermetic enclosure. Thereafter a low pressure ambient is provided in the hermetic enclosure. A plasma including ions of solid materials is produced the ceramic surface of the article being at least partially immersed in a macroparticle free region of the plasma. While the article is immersed in the macroparticle free region, a bias of the substrate holder is biased between a low voltage at which material from the plasma condenses on the surface of the article and a high negative voltage at which ions from the plasma are implanted into the article. 15 figs.

  2. Measurement of two-phase flow momentum with force transducers

    SciTech Connect

    Hardy, J.E.; Smith, J.E.

    1990-01-01

    Two strain-gage-based drag transducers were developed to measure two-phase flow in simulated pressurized water reactor (PWR) test facilities. One transducer, a drag body (DB), was designed to measure the bidirectional average momentum flux passing through an end box. The second drag sensor, a break through detector (BTD), was designed to sense liquid downflow from the upper plenum to the core region. After prototype sensors passed numerous acceptance tests, transducers were fabricated and installed in two experimental test facilities, one in Japan and one in West Germany. High-quality data were extracted from both the DBs and BTDs for a variety of loss-of-coolant accident (LOCA) scenarios. The information collected from these sensors has added to the understanding of the thermohydraulic phenomena that occur during the refill/reflood stage of a LOCA in a PWR. 9 refs., 15 figs.

  3. Initial size distributions and hygroscopicity of indoor combustion aerosol particles

    SciTech Connect

    Li, W.; Hopke, P.K.

    1993-10-01

    Cigarette smoke, incense smoke, natural gas flames, propane fuel flames, and candle flames are contributors of indoor aerosol particles. To provide a quantitative basis for the modeling of inhaled aerosol deposition pattern, the hygroscopic growth of particles from these five sources as well as the source size distributions were measured. Because the experiments were performed on the bases of particles of single size, it provided not only the averaged particle`s hygroscopic growth of each source, but also the detailed size change for particles of different sizes within the whole size spectrum. The source particle size distribution measurements found that cigarette smoke and incense smoke contained particles in the size range of 100-700 nm, while the natural gas, propane, and candle flames generated particles between 10 and 100 nm. The hygroscopic growth experiments showed that these combustion aerosol particles could grow 10% to 120%, depending on the particle sizes and origins. 18 refs., 15 figs., 3 tabs.

  4. Flexture plate motion-transfer mechanism, beam-splitter assembly, and interferometer incorporating the same

    DOEpatents

    Carangelo, R.M.; Dettori, M.D.; Grigely, L.J.; Murray, T.C.; Solomon, P.R.; Dine, C.P. Van; Wright, D.D.

    1996-01-23

    A multiplicity of one-piece flexure plates are assembled in pairs to provide a support system on which a retroreflector may be mounted for reciprocal motion. Combined with balance bodies, the flexure plates provide a support system having portions that are dynamically and statically balanced with one another, irrespective of orientation, so as to thereby immunize the unit against extraneous forces. The motion transfer assembly is especially adapted for use to support a moving retroreflector in a two-arm interferometer that may further include a beamsplitter assembly constructed from a one-piece, integrally formed body, the body having convergent, optically flat planar surfaces of specular reflectance, and means for adjustably mounting a beamsplitter therein. The spectrometer is of modular construction, and employs an integrated clocking sub-assembly as well as a light-weight voice-coil motor. 15 figs.

  5. User's guide to a data base of current environmental monitoring projects in the US-Canadian transboundary region

    SciTech Connect

    Ballinger, M.Y.; Defferding, J.; Chapman, E.G.; Bettinson, M.D.; Glantz, C.S.

    1987-11-01

    This document describes how to use a data base of current transboundary region environmental monitoring projects. The data base was prepared from data provided by Glantz et al. (1986) and Concord Scientific Corporation (1985), and contains information on 226 projects with monitoring stations located within 400 km (250 mi) of the US-Canadian border. The data base is designed for use with the dBASE III PLUS data management systems on IBM-compatible personal computers. Data-base searches are best accomplished using an accompanying command file called RETRIEVE or the dBASE command LIST. The user must carefully select the substrings on which the search is to be based. Example search requests and subsequent output are presented to illustrate substring selections and applications of the data base. 4 refs., 15 figs., 4 tabs.

  6. Feeding Activity, Rate of Consumption, Daily Ration and Prey Selection of Major Predators in the John Day Pool. 1982 Annual Report.

    SciTech Connect

    Gray, Gerard A.; United States. Bonneville Power Administration

    1984-03-01

    This study was initiated to determine the extent of predation by resident populations of native and introduced fish on juvenile salmonids in main stem Columbia River Reservoirs. The John Day Reservoir and tailrace was selected as the study area. First year objectives were: (1) determine whether native and introduced predators preyed on juvenile salmonids; (2) determine which species were major predators; and (3) locate areas where predation was most intense. Results indicated that juvenile salmonids were consumed by all four predatory fish species studied: northern squawfish (Ptychocheilus oregonensis), walleye (Stizostedion vitreum vitreum), smallmouth bass (Micropterus dolomieu), and channel catfish (Ictalurus punctatus). However, degree of predation varied among predators as a function of spatial distribution, apparent abundance, size, and temporal feeding behavior. 15 figs., 16 tabs.

  7. Interactions of structurally modified surfactants with reservoir minerals: Calorimetric, spectroscopic and electrokinetic study

    SciTech Connect

    Somasundaran, P.; Sivakumar, A.; Xu, Q.

    1991-03-01

    The objective of this project is to elucidate mechanisms of adsorption of structurally modified surfactants on reservoir minerals and to develop a full understanding of the effect of the surfactant structure on the nature of the adsorbed layers at the molecular level. An additional aim is to study the adsorption of surfactant mixtures on simple well-characterized minerals and on complex minerals representing real conditions. The practical goal of these studies is the identification of the optimum surfactant structures and their combinations for micellar flooding. In this work, the experiments on adsorption were focussed on the position of sulfonate and methyl groups on the aromatic ring of alkyl xylene sulfonates. A multi-pronged approach consisting of calorimetry, electrokinetics, wettability and spectroscopy is planned to elucidate the adsorption mechanism of surfactants and their mixtures on minerals such as alumina and kaolinite. 32 refs., 15 figs., 7 tabs.

  8. The air quality monitoring program for the 1100-EM-1 remedial investigation

    SciTech Connect

    Glantz, C.S.; Laws, G.L.

    1990-09-01

    Air quality monitoring for the remedial investigation of the Hanford Site's 1100-EM-1 operable unit was conducted in the spring and fall of 1989 and during January 1990. The monitoring program was divided into two phases. The first phase examined the air quality impact of routine atmospheric emissions at three of the operable unit's waste sites before the beginning of intrusive remedial investigation activities. The second phase of monitoring examined the air quality impact of routine atmospheric emissions from two of the operable unit's waste sites during intrusive remedial investigation activities. Each phase of the program consisted of a series of monitoring events that measured pollutant concentrations at key locations upwind and downwind of individual waste sites. During each monitoring event, sampling was conducted to determine the air concentrations of a wide variety of volatile organic compounds and semivolatile organic compounds. Monitoring for heavy metals and asbestos was also conducted during some monitoring events. 8 refs., 15 figs., 9 tabs.

  9. First tests with fully depleted PN-CCD's

    SciTech Connect

    Strueder, L.; Lutz, G.; Sterzik, M.; Holl, P.; Kemmer, J.; Prechtel, U.; Ziemann, T.; Rehak, P.

    1987-01-01

    We have fabricated 280 ..mu..m thick fully depletable pn CCD's on high resistivity silicon ()rho) approx. 2.5 k..cap omega..cm). Its operation is based on the semiconductor drift chamber principle proposed by Gatti and Rheak. They are designed as energy and position sensitive radiation detector for (minimum) ionizing particles and X-ray imaging. Two dimensional semiconductor device modeling demonstrates the basic charge transer mechanisms. Prototypes of the detectors have been tested in static and dynamic conditions. A preliminary charge transfer inefficiency was determined to 6 x 10)sup)minus)3). The charge loss during the transfer is discussed and as a consequence we have developed an improved design for a second fabrication iteration which is now being produced. 4 refs., 15 figs.

  10. Simulation of Z boson production at D0

    SciTech Connect

    Ascher, D.

    1990-05-14

    This thesis presents the results of some of the author's work in the High Energy Physics Group at Brown University, work done within the framework of the D0 collaboration at the Fermilab National particle accelerator. To allow a broader audience an easier understanding of the experimental data presented, a brief review of the relevant areas of Particle Physics precedes the description of the experimental setup and results. Monte Carlo simulations of Z boson production at the D0 experiment were made to allow for precise predictions of expected data at the accelerator when construction reaches completion. The specific work that was executed is presented in detail, from the point of view of experimental high energy research, followed by comments on the results obtained and on possible future directions. 4 refs., 15 figs.

  11. Evaluation of severe accident risks: Quantification of major input parameters: MAACS (MELCOR Accident Consequence Code System) input

    SciTech Connect

    Sprung, J.L.; Jow, H-N ); Rollstin, J.A. ); Helton, J.C. )

    1990-12-01

    Estimation of offsite accident consequences is the customary final step in a probabilistic assessment of the risks of severe nuclear reactor accidents. Recently, the Nuclear Regulatory Commission reassessed the risks of severe accidents at five US power reactors (NUREG-1150). Offsite accident consequences for NUREG-1150 source terms were estimated using the MELCOR Accident Consequence Code System (MACCS). Before these calculations were performed, most MACCS input parameters were reviewed, and for each parameter reviewed, a best-estimate value was recommended. This report presents the results of these reviews. Specifically, recommended values and the basis for their selection are presented for MACCS atmospheric and biospheric transport, emergency response, food pathway, and economic input parameters. Dose conversion factors and health effect parameters are not reviewed in this report. 134 refs., 15 figs., 110 tabs.

  12. Safety lock-out device for electrical appliances

    DOEpatents

    Cliff, P.L. Jr.

    1996-07-09

    A safety lock-out device prevents the insertion of an electrical power cord into an electrical power cord receptacle of an electrical appliance. The device comprises a mounting plate fastened to the appliance and a hinged cover plate attached to the appliance. The cover plate is movable between a first position and a second position such that, in the first position, the cover plate covers and prevents insertion of a power cord into the appliance receptacle. In said second position, the appliance receptacle is uncovered to permit insertion of a power cord into the receptacle. Extending a lock shank through aligned openings formed in flange members extending from the mounting plate, the cover plate locks the cover plate in the first position. 15 figs.

  13. Process for recovering pertechnetate ions from an aqueous solution also containing other ions

    DOEpatents

    Rogers, R.; Horwitz, E.P.; Bond, A.H.

    1997-02-18

    A solid/liquid process for the separation and recovery of TcO{sub 4}{sup {minus}1} ions from an aqueous solution is disclosed. The solid support comprises separation particles having surface-bonded poly(ethylene glycol) groups; whereas the aqueous solution from which the TcO{sub 4}{sup {minus}1} ions are separated contains a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved salt. A solid/liquid phase admixture of separation particles containing bound TcO{sub 4}{sup {minus}1} ions in such an aqueous solution that is free from MoO{sub 4}{sup {minus}2} ions is also contemplated, as is a chromatography apparatus containing that solid/liquid phase admixture. 15 figs.

  14. Numerical modeling of gas migration at a proposed repository for low and intermediate level nuclear wastes at Oberbauenstock, Switzerland

    SciTech Connect

    Pruess, K.

    1990-03-01

    Hydrologic impacts of corrosive gas release from a hypothetical L/ILW nuclear waste repository at Oberbauenstock are explored by means of numerical simulation. A schematic two dimensional vertical section through the mountain is modeled with the simulator TOUGH, which describes two-phase flow of water and gas in porous and fractured media. Two reference cases are considered which represent the formations as a porous and as a fractured-porous (dual permeability) medium, respectively. Both cases predict similar and rather modest pressure increases, from ambient 10 bars to near 25 bars at the repository level. These results are to be considered preliminary because important parameters affecting two-phase flow, such as relative permeabilities of a fractured medium, are not well known at present. 24 refs., 15 figs., 5 tabs.

  15. Device and method for producing a containment barrier underneath and around in-situ buried waste

    DOEpatents

    Gardner, B.M.; Smith, A.M.; Hanson, R.W.; Hodges, R.T.

    1998-08-11

    An apparatus is described for building a horizontal underground barrier by cutting through soil and depositing a slurry, preferably on which cures into a hardened material. The apparatus includes a digging means for cutting and removing soil to create a void under the surface of the ground and injection means for inserting barrier-forming material into the void. In one embodiment, the digging means is a continuous cutting chain. Mounted on the continuous cutting chain are cutter teeth for cutting through soil and discharge paddles for removing the loosened soil. This invention includes a barrier placement machine, a method for building an underground horizontal containment barrier using the barrier placement machine, and the underground containment system. Preferably the underground containment barrier goes underneath and around the site to be contained in a bathtub-type containment. 15 figs.

  16. Waste Isolation Pilot Plant site environmental report for calendar year 1990

    SciTech Connect

    Not Available

    1990-01-01

    The US Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) Operational Environmental Monitoring Plan (OEMP) monitors a comprehensive set of parameters in order to detect any potential environmental impacts and establish baselines for future quantitative environmental impact evaluations. Surface water and groundwater, soil, and biotics are measured for background radiation. Nonradiological environmental monitoring activities include meteorological, air quality, soil properties, and the status of the local biological community. Ecological studies focus on the immediate area surrounding the site with emphasis on the salt storage pile, whereas baseline radiological surveillance covers a broader geographic area including nearby ranches, villages, and cities. Since the WIPP is still in a preoperational state, no waste has been received; therefore, certain elements required by Order DOE 5400.1 are not presented in this report. 15 figs. 19 tabs.

  17. Influence of the microstructure of ceramic materials on their wear behavior in mechanical seals

    SciTech Connect

    Wallis, R.

    1994-10-01

    Ceramic materials such as aluminium oxide and silicon carbide are regularly used as one of the counterfaces to oppose carbon graphite in a mechanical seal. Under nominally identical test conditions, the same carbon graphite face can show high wear rates against a material from one supplier but a significantly lower wear rate on a similar material from another. The general descriptions of aluminium oxide and silicon carbide can cover significant differences in properties between materials from various suppliers. Ceramic counterfaces from several manufacturers have been examined, after testing under similar conditions, in order to understand the microstructural factors that influence the wear of the carbon graphite and hence the lift of the mechanical seal. There is evidence to suggest that the wear resistance of the system depends on the grain size distribution, the integrity of the grain bonding and the presence of additional phases. 13 refs., 15 figs., 1 tab.

  18. Method and apparatus for determining the hydraulic conductivity of earthen material

    DOEpatents

    Sisson, J.B.; Honeycutt, T.K.; Hubbell, J.M.

    1996-05-28

    An earthen material hydraulic conductivity determining apparatus includes: (a) a semipermeable membrane having a fore earthen material bearing surface and an opposing rear liquid receiving surface; (b) a pump in fluid communication with the semipermeable membrane rear surface, the pump being capable of delivering liquid to the membrane rear surface at a plurality of selected variable flow rates or at a plurality of selected variable pressures; (c) a liquid reservoir in fluid communication with the pump, the liquid reservoir retaining a liquid for pumping to the membrane rear surface; and (d) a pressure sensor in fluid communication with the membrane rear surface to measure pressure of liquid delivered to the membrane by the pump. Preferably, the pump comprises a pair of longitudinally opposed and aligned syringes which are operable to simultaneously fill one syringe while emptying the other. Methods of determining the hydraulic conductivity of earthen material are also disclosed. 15 figs.

  19. Apparatus for in situ heating and vitrification

    DOEpatents

    Buelt, J.L.; Oma, K.H.; Eschbach, E.A.

    1994-05-31

    An apparatus for decontaminating ground areas where toxic chemicals are buried includes a plurality of spaced electrodes located in the ground and to which a voltage is applied for bringing about current flow. Power delivered to the ground volatilizes the chemicals that are then collected and directed to a gas treatment system. A preferred form of the invention employs high voltage arc discharge between the electrodes for heating a ground region to relatively high temperatures at relatively low power levels. Electrodes according to the present invention are provided with preferentially active lower portions between which current flows for the purpose of soil heating or for soil melting and vitrification. Promoting current flow below ground level avoids predominantly superficial treatment and increases electrode life. 15 figs.

  20. Pulsed electron beam precharger

    SciTech Connect

    Finney, W.C.; Shelton, W.N.

    1990-01-01

    Florida State University is investigating the concept of pulsed electron beams for fly ash precipitation. This report describes the results and data on three of the subtasks of this project and preliminary work only on the remaining five subtasks. Described are the modification of precharger for pulsed and DC energization of anode; installation of the Q/A measurement system; and modification and installation of pulsed power supply to provide both pulsed and DC energization of the anode. The other tasks include: measurement of the removal efficiency for monodisperse simulated fly ash particles; measurement of particle charge; optimization of pulse energization schedule for maximum removal efficiency; practical assessment of results; and measurement of the removal efficiency for polydisperse test particles. 15 figs., 1 tab. (CK)

  1. Indications of mineral zoning in a fossil hydrothermal system at the Meager Creek geothermal prospect, British Columbia, Canada, from induced polarization studies

    SciTech Connect

    Ward, S.H.; Zhao, J.X.; Groenwald, J.; Moore, J.N.

    1985-05-01

    By measuring the induced-polarization parameters m (chargeability) and tau (time-constant) we have found evidence that the center of a presumed fossil hydrothermal system at Meager Creek, British Columbia, lies south of the main manifestation of the present-day convective hydrothermal system. What implication this finding has for development of the present-day system is unknown. However, some of the fractures formed during the development of the fossil hydrothermal system may serve as conduits for fluids of the present-day system. The analysis is limited by the lack of availability of a good subsurface distribution of core samples. Nevertheless, a surface induced-polarization survey is expected to yield information about the geometry of the fossil system. Such knowledge would have implications not only for Meager Creek but for other hydrothermal systems of Cascades volcano type. 16 refs., 15 figs., 1 tab.

  2. Disruption, beamstrahlung, and beamstrahlung pair creation

    SciTech Connect

    Chen, P.

    1988-12-01

    The two major effects from the interaction of e/sup /minus//e/sup +/ beams---beamstrahlung and disruption---are reviewed, with emphasis on flat beam collisions. For the disruption effects we discuss the luminosity enhancement factor, the maximum and rms disruption angles, and the ''kink instability''. All the results are obtained from computer simulations, and scaling laws based on these are deduced whenever possible. For the beamstrahlung effects, we concentrate only on the final electron energy spectrum and the deflection angle associated with low energy particles. In addition to the generic studies on the beam-beam effects, we also list the relevant beam-beam parameters obtained from simulations on two sample designs: the TLC and the ILC. As an addendum, the newly discovered phenomenon of coherent beamstrahlung pair creation, together with the incoherent process, are discussed. 18 refs., 15 figs., 1 tab.

  3. Fuel consolidation demonstration program: Final Report

    SciTech Connect

    Not Available

    1990-06-01

    EPRI, Northeast Utilities, Baltimore Gas and Electric, the US Department of Energy and Combustion Engineering are engaged in a program to develop a system for consolidating spent fuel and a method of storing the consolidated fuel in the spent fuel storage pool which is licensable by the US Nuclear Regulatory Commission. Fuel consolidation offers a means of substantially increasing the capacity of spent fuel storage pools. This is a final report of the Fuel Consolidation Demonstration Program. It provides a review of the overall program, a summary of the results obtained, the lessons learned, and an assessment of the present status of the consolidation system developed in the program. 7 refs., 15 figs., 5 tabs.

  4. The EGS4 Code System: Solution of Gamma-ray and Electron Transport Problems

    DOE R&D Accomplishments Database

    Nelson, W. R.; Namito, Yoshihito

    1990-03-01

    In this paper we present an overview of the EGS4 Code System -- a general purpose package for the Monte Carlo simulation of the transport of electrons and photons. During the last 10-15 years EGS has been widely used to design accelerators and detectors for high-energy physics. More recently the code has been found to be of tremendous use in medical radiation physics and dosimetry. The problem-solving capabilities of EGS4 will be demonstrated by means of a variety of practical examples. To facilitate this review, we will take advantage of a new add-on package, called SHOWGRAF, to display particle trajectories in complicated geometries. These are shown as 2-D laser pictures in the written paper and as photographic slides of a 3-D high-resolution color monitor during the oral presentation. 11 refs., 15 figs.

  5. Method for curing polymers using variable-frequency microwave heating

    DOEpatents

    Lauf, R.J.; Bible, D.W.; Paulauskas, F.L.

    1998-02-24

    A method for curing polymers incorporating a variable frequency microwave furnace system designed to allow modulation of the frequency of the microwaves introduced into a furnace cavity is disclosed. By varying the frequency of the microwave signal, non-uniformities within the cavity are minimized, thereby achieving a more uniform cure throughout the workpiece. A directional coupler is provided for detecting the direction of a signal and further directing the signal depending on the detected direction. A first power meter is provided for measuring the power delivered to the microwave furnace. A second power meter detects the magnitude of reflected power. The furnace cavity may be adapted to be used to cure materials defining a continuous sheet or which require compressive forces during curing. 15 figs.

  6. Hanford radiological protection support services annual report for 1988

    SciTech Connect

    Lyon, M.; Fix, J.J.; Kenoyer, J.L.; Leonowich, J.A.; Palmer, H.E.; Sula, M.J.

    1989-06-01

    The report documents the performance of certain radiological protection sitewide services during calendar year (CY) 1988 by Pacific Northwest Laboratory (PNL) in support of the US Department of Energy-Richland Operations Office (DOE-RL) and contractor activities on the Hanford Site. The routine program for each service is discussed along with any significant program changes and tasks, investigations, and studies performed in support of each program. Other related activities such as publications, presentations, and memberships on standard or industry committees are also listed. The programs covered provide services in the areas of (1) internal dosimetry, (2) in vivo measurements, (3) external dosimetry, (4) instrument calibration and evaluation, (5) calibration of radiation sources traceable to the National Institute of Standards and Technology (NIST) (formerly the National Bureau of Standards), and (6) radiological records. 23 refs., 15 figs., 15 tabs.

  7. Multilevel cascade voltage source inverter with separate DC sources

    DOEpatents

    Peng, F.Z.; Lai, J.S.

    1997-06-24

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations. 15 figs.

  8. Plant rhamnogalacturonan II complexation of heavy metal cations

    DOEpatents

    O`Neill, M.A.; Pellerin, P.J.M.; Warrenfeltz, D.; Vidal, S.; Darvill, A.G.; Albersheim, P.

    1999-03-02

    The present invention provides rhamnogalacturonan-II (RG-II) and relates to its ability to complex specific multivalent heavy metal cations. In the presence of boric acid, RG-II monomers form dimers that are cross-linked by a borate ester. The yield of such borate ester cross-linked dimers of RG-II is enhanced in the presence of specific heavy metal cations. The present invention further relates to the utility of RG-II in assays for the detection of specific heavy metal contamination; as a reagent useful in the removal of specific heavy metal cations contaminating foods and liquids, for example, fish, wines, etc.; as a pharmaceutical composition useful as an antidote in specific heavy metal cation poisoning; as a treatment for the detoxification of specific heavy metal cations from blood and/or tissues; and in a method of remediation of waters and soils contaminated with specific heavy metal cations. 15 figs.

  9. Volatile organic compound sensing devices

    DOEpatents

    Lancaster, G.D.; Moore, G.A.; Stone, M.L.; Reagen, W.K.

    1995-08-29

    Apparatus employing vapochromic materials in the form of inorganic double complex salts which change color reversibly when exposed to volatile organic compound (VOC) vapors is adapted for VOC vapor detection, VOC aqueous matrix detection, and selective VOC vapor detection. The basic VOC vapochromic sensor is incorporated in various devices such as a ground probe sensor, a wristband sensor, a periodic sampling monitor, a soil/water penetrometer, an evaporative purge sensor, and various vacuum-based sensors which are particularly adapted for reversible/reusable detection, remote detection, continuous monitoring, or rapid screening of environmental remediation and waste management sites. The vapochromic sensor is used in combination with various fiber optic arrangements to provide a calibrated qualitative and/or quantitative indication of the presence of VOCs. 15 figs.

  10. Investigation on the continued production of the Naval Petroleum Reserves beyond April 5, 1991

    SciTech Connect

    Not Available

    1990-09-01

    The authority to produce the Naval Petroleum Reserves (NPRs) is due to expire in April 1991, unless extended by Presidential finding. As provided in the Naval Petroleum Reserves Production act of 1976 (Public Law 94-258), the President may continue production of the NPRs for a period of up to three years following the submission to Congress, at least 180 days prior to the expiration of the current production period, of a report that determines that continued production of the NPRs is necessary and a finding by the President that continued production is in the national interest. This report assesses the need to continue production of the NPRs, including analyzing the benefits and costs of extending production or returning to the shut-in status that existed prior to 1976. This continued production study considers strategic, economic, and energy issues at the local, regional, and national levels. 15 figs., 13 tabs.

  11. Rock support system development test plan

    SciTech Connect

    Patricio, J.G. . Rockwell Hanford Operations)

    1984-03-30

    The Test Plan has been prepared to support design activities for the development of a rock support system for a Nuclear Waste Repository in Basalt (NWRB). The rock support system is assumed to consist of a combination of shotcrete and rock bolts. The seven testing activities include mix development and physical testing of shotcrete, durability testing of shotcrete, durability testing of rock bolt grouts, field tests on rock bolts, field testing of shotcrete, and heated room test. The objective of the Test Plan is to develop required data through combined laboratory, field, and office studies for design and design validation of the rock support system. The overall Test Plan is developed to provide a logical progression from laboratory tests performed to characterize fundamental thermomechanical properties of shotcrete and grouts, to field tests on rock bolts and shotcrete, and in situ performance tests. 21 refs., 15 figs., 33 tabs.

  12. Graphite for the nuclear industry

    SciTech Connect

    Burchell, T.D.; Fuller, E.L.; Romanoski, G.R.; Strizak, J.P.

    1991-01-01

    Graphite finds applications in both fission and fusion reactors. Fission reactors harness the energy liberated when heavy elements, such as uranium or plutonium, fragment or fission''. Reactors of this type have existed for nearly 50 years. The first nuclear fission reactor, Chicago Pile No. 1, was constructed of graphite under a football stand at Stagg Field, University of Chicago. Fusion energy devices will produce power by utilizing the energy produced when isotopes of the element hydrogen are fused together to form helium, the same reaction that powers our sun. The role of graphite is very different in these two reactor systems. Here we summarize the function of the graphite in fission and fusion reactors, detailing the reasons for their selection and discussing some of the challenges associated with their application in nuclear fission and fusion reactors. 10 refs., 15 figs., 1 tab.

  13. Evaluation of waste treatment technologies by LLWDDD (Low-Level Waste Disposal Development and Demonstration) Programs

    SciTech Connect

    Kennerly, J.M.; Williams, L.C.; Dole, L.R.; Genung, R.K.

    1987-01-01

    Waste treatments are divided into four categories: (1) volume reduction; (2) conditioning to improve waste form performance; (3) segregation to achieve waste reduction; and (4) separation to remove radioactive (or hazardous) constituents. Two waste treatment demonstrations are described. In the first, volume reduction by mechanical means was achieved during the supercompaction of 300 55-gal drums of solid waste at ORNL. In the second demonstration, conditioning of waste through immobilization and packaging to improve the performance of the waste form is being evaluated. The final section of this paper describes potential scenarios for the management of uranium-contaminated wastes at the Y-12 Plant in Oak Ridge and emphasizes where demonstrations of treatment technology will be needed to implement the scenarios. Separation and thermal treatment are identified as the principal means for treating these wastes. 15 figs.

  14. Some results of long-term investigation population exposed as a result of release of radioactive wastes into the Techa River in Southern Urals

    SciTech Connect

    Degteva, M.O.; Kozheurov, V.P.; Vorobiova, M.I.

    1992-06-01

    This paper describes results of a long-term investigation of a population exposed to radioactive waste release in 1949-1956 into the Techa River in the Southern Urals. Systematic measurements of radionuclide concentration in the river waters, sediments, and floodplain soils and measurements of exposure gamma dose rates as well as studies of the radionuclide composition in the contaminated areas began in the summer of 1951. As a result of the contamination, 124,000 residents were exposed to radiation and 28,100 received significant doses in terms of health effect potential. Covered results include the following: estimation of external radiation doses; content of strontium-90 in humans and estimation of radionuclide ingestion rates; age-dependent model of strontium metabolism in the human body; evaluation of doses of internal irradiation; distribution of exposed population according to accumulated doses. 11 refs; 15 figs.

  15. ORNL Long-Range Environmental and Waste Management Plan: Program overview and summary

    SciTech Connect

    Bates, L.D.; Berry, J.B.; Butterworth, G.E.; du Mont, S.P. III; Easterday, C.A.; Geisler, A.H.; Hill, L.G.; Kendrick, C.M.; McNeese, L.E.; Myrick, T.E.; Pudelek, R.E.; Rohwer, P.S.; Scanlan, T.F.; Stratton, L.E.; Trabalka, J.R.; Youngblood, E.L.

    1987-12-01

    The primary purpose is to provide a thorough and systematic planning document to reflect the continuing process of site assessment, strategy development, and planning for the current and long-term control of environmental issues, waste management practices, and remedial action requirments. The document also provides an estimate of the resources required to implenent the current plan. As with any document of this nature, the near-term (one to three years) part of the plan is a realistic assessment of the current program and ongoing capital projects and relects the efforts preceived to be necesary to comply with all current state and federal regulations and DOE orders. It also should be in general agreement with current budget (funding) requests and obligations for these immediate years. Beyond the immediate time frame, the document reflects the strategy and the project and funding estimates as a snapshot at the time of publication. 15 figs., 10 tabs.

  16. Separation of glycols from dilute aqueous solutions via complexation with boronic acids

    SciTech Connect

    Randel, L.A.; King, C.J.

    1991-07-01

    This work examines methods of separating low molecular weight glycols from dilute aqueous solution. Extraction into conventional solvents is generally not economical, since, in the literature reviewed, distribution ratios for the two- to four-carbon glycols are all less than one. Distribution ratios can be increased, however, by incorporating into the organic phase an extracting agent that will complex with the solute of interest. The extracting agent investigated in this work is 3-nitrophenylboronic acid (NPBA). NPBA, a boric acid derivative, reversibly complexes with many glycols. The literature on complexation of borate and related compounds with glycols, including mechanistic data, measurement techniques, and applications to separation processes, provides information valuable for designing experiments with NPBA and is reviewed herein. 88 refs., 15 figs., 24 tabs.

  17. Stellar core collapse and supernova

    SciTech Connect

    Wilson, J.R.; Mayle, R.; Woosley, S.E.; Weaver, T.

    1985-04-01

    Massive stars that end their stable evolution as their iron cores collapse to a neutron star or black hole long been considered good candidates for producing Type II supernovae. For many years the outward propagation of the shock wave produced by the bounce of these iron cores has been studied as a possible mechanism for the explosion. For the most part, the results of these studies have not been particularly encouraging, except, perhaps, in the case of very low mass iron cores or very soft nuclear equations of state. The shock stalls, overwhelmed by photodisintegration and neutrino losses, and the star does not explode. More recently, slow late time heating of the envelope of the incipient neutron star has been found to be capable of rejuvenating the stalled shock and producing an explosion after all. The present paper discusses this late time heating and presents results from numerical calculations of the evolution, core collapse, and subsequent explosion of a number of recent stellar models. For the first time they all, except perhaps the most massive, explode with reasonable choices of input physics. 39 refs., 17 figs., 1 tab.

  18. Thermochemical properties of gibbsite, bayerite, boehmite, diaspore, and the aluminate ion between 0 and 350/degree/C

    SciTech Connect

    Apps, J.A.; Neil, J.M.; Jun, C.H.

    1989-01-01

    A requirement for modelling the chemical behavior of groundwater in a nuclear waste repository is accurate thermodynamic data pertaining to the participating minerals and aqueous species. In particular, it is important that the thermodynamic properties of the aluminate ion be accurately determined, because most rock forming minerals in the earth's crust are aluminosilicates, and most groundwaters are neutral to slightly alkaline, where the aluminate ion is the predominant aluminum species in solution. Without a precise knowledge of the thermodynamic properties of the aluminate ion aluminosilicate mineral solubilities cannot be determined. The thermochemical properties of the aluminate ion have been determined from the solubilities of the aluminum hydroxides and oxyhydroxides in alkaline solutions between 20 and 350/degree/C. An internally consistent set of thermodynamic properties have been determined for gibbsite, boehmite, diaspore and corundum. The thermodynamic properties of bayerite have been provisionally estimated and a preliminary value for ..delta..G/sub f, 298//sup 0/ of nordstrandite has been determined. 205 refs., 17 figs., 25 tabs.

  19. MORSE/STORM: A generalized albedo option for Monte Carlo calculations

    SciTech Connect

    Gomes, I.C.; Stevens, P.N. )

    1991-09-01

    The advisability of using the albedo procedure for the Monte Carlo solution of deep penetration shielding problems that have ducts and other penetrations has been investigated. The use of albedo data can dramatically improve the computational efficiency of certain Monte Carlo calculations. However, the accuracy of these results may be unacceptable because of lost information during the albedo event and serious errors in the available differential albedo data. This study was done to evaluate and appropriately modify the MORSE/BREESE package, to develop new methods for generating the required albedo data, and to extend the adjoint capability to the albedo-modified calculations. Major modifications to MORSE/BREESE include an option to save for further use information that would be lost at the albedo event, an option to displace the point of emergence during an albedo event, and an option to use spatially dependent albedo data for both forward and adjoint calculations, which includes the point of emergence as a new random variable to be selected during an albedo event. The theoretical basis for using TORT-generated forward albedo information to produce adjuncton albedos was derived. The MORSE/STORM package was developed to perform both forward and adjoint modes of analysis using spatially dependent albedo data. Results obtained with MORSE/STORM for both forward and adjoint modes were compared with benchmark solutions. Excellent agreement and improved computational efficiency were achieved, demonstrating the full utilization of the albedo option in the MORSE code. 7 refs., 17 figs., 15 tabs.

  20. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Plant. FY 1983-84 annual report

    SciTech Connect

    Pechmann, J.H.K.; Semlitsch, R.D.; Lew, R.M.; Mayack, D.T.

    1984-12-01

    This report details the ecological studies, conducted during Fiscal Years FY- 1983 and 1984 by the Savannah River Ecology Laboratory (SREL), that relate to the construction of the Defense Waste Processing Facility (DWPF) on the Savannah River Plant (SRP) near Aiken, South Carolina. SREL has been contracted to carry out these studies for the Department of Energy (DOE) in order to provide data needed to show compliance with the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, and Executive Order 11990 (Protection of Wetlands, 1977). Studies in previous years were directed toward compiling a biological inventory of both the DWPF construction site and alternative sites. This information was then utilized to predict the effects of construction on resident biota in the effected areas. Since the start of this construction of FY-1984, the focus of our efforts has shifted to verification of the predicted impacts, and evaluation of the effectiveness of mitigation measures. Particular emphasis is being placed on monitoring the effects of runoff from the site on peripheral streams in the SRP's Upper Three Runs watershed, and on artificial refuge ponds. These ponds, completed during FY-1983, represent an experimental attempt to mitigate the loss of an important amphibian breeding site, Sun Bay, to DWPF construction. Monitoring of a similar undisturbed wetland, Rainbow Bay, has continued in order to provide a comparable control site for these studies. 70 refs., 17 figs., 20 tabs.

  1. Environmental Survey preliminary report, Princeton Plasma Physics Laboratory, Princeton, New Jersey

    SciTech Connect

    Not Available

    1989-05-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Princeton Plasma Physics Laboratory (PPPL), conducted June 13 through 17, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Team members are being provided by private contractors. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PPPL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PPPL, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environment problems identified during its on-site activities. The S A plan is being developed by the Idaho National Engineering Laboratory. When completed, the S A results will be incorporated into the PPPL Survey findings for inclusion in the Environmental Survey Summary Report. 70 refs., 17 figs., 21 tabs.

  2. Constrained space camera assembly

    DOEpatents

    Heckendorn, F.M.; Anderson, E.K.; Robinson, C.W.; Haynes, H.B.

    1999-05-11

    A constrained space camera assembly which is intended to be lowered through a hole into a tank, a borehole or another cavity is disclosed. The assembly includes a generally cylindrical chamber comprising a head and a body and a wiring-carrying conduit extending from the chamber. Means are included in the chamber for rotating the body about the head without breaking an airtight seal formed therebetween. The assembly may be pressurized and accompanied with a pressure sensing means for sensing if a breach has occurred in the assembly. In one embodiment, two cameras, separated from their respective lenses, are installed on a mounting apparatus disposed in the chamber. The mounting apparatus includes means allowing both longitudinal and lateral movement of the cameras. Moving the cameras longitudinally focuses the cameras, and moving the cameras laterally away from one another effectively converges the cameras so that close objects can be viewed. The assembly further includes means for moving lenses of different magnification forward of the cameras. 17 figs.

  3. A study of surfactant-assisted waterflooding

    SciTech Connect

    Scamehorn, J F; Harwell, J H

    1990-09-01

    In surfactant-assisted waterflooding, a surfactant slug is injected into a reservoir, followed by a brine spacer, followed by second surfactant slug. The charge on the surfactant in the first slug has opposite sign to that in the second slug. When the two slugs mix in the reservoir, a precipitate or coacervate is formed which plugs the permeable region of the reservoir. Subsequently injected water or brine is forced through the low permeability region of the reservoir, increasing sweep efficiency of the waterflood, compared to a waterflood not using surfactants. In this part of the work, two major tasks are performed. First, core floods are performed with oil present to demonstrate the improvement in incremental oil production, as well as permeability modification. Second, a reservoir simulation model will be proposed to further delineate the optimum strategy for implementation of the surfactant-assisted waterflooding, as well as indicate the reservoir types for which it would be most effective. Surfactants utilized were sodium dodecyl sulfate and dodecyl pyridinium chloride. 44 refs., 17 figs., 3 tabs.

  4. Apparatus for measuring minority carrier lifetimes in semiconductor materials

    DOEpatents

    Ahrenkiel, R.K.

    1999-07-27

    An apparatus for determining the minority carrier lifetime of a semiconductor sample includes a positioner for moving the sample relative to a coil. The coil is connected to a bridge circuit such that the impedance of one arm of the bridge circuit is varied as sample is positioned relative to the coil. The sample is positioned relative to the coil such that any change in the photoconductance of the sample created by illumination of the sample creates a linearly related change in the input impedance of the bridge circuit. In addition, the apparatus is calibrated to work at a fixed frequency so that the apparatus maintains a consistently high sensitivity and high linearly for samples of different sizes, shapes, and material properties. When a light source illuminates the sample, the impedance of the bridge circuit is altered as excess carriers are generated in the sample, thereby producing a measurable signal indicative of the minority carrier lifetimes or recombination rates of the sample. 17 figs.

  5. A new technology for producing hydrogen and adjustable ratio syngas from coke oven gas

    SciTech Connect

    Jun Shen; Zhi-zhong Wang; Huai-wang Yang; Run-sheng Yao

    2007-12-15

    About 15 billion Nm{sup 3} coke oven gas (COG) is emitted into the air in Shanxi Province in China as air pollutants. It is also a waste of precious chemical resources. In this study, COG was purified respectively by four methods including refrigeration, fiberglass, silica gel, and molecular sieve. Purified COG was separated by a prism membrane into two gas products. One consists mainly of H{sub 2} ({gt}90 vol %) and the other is rich in CH{sub 4} ({gt}60 vol %) with their exact compositions to vary with the membrane separation pressure and outlet gas flow ratio. The gas rich in CH{sub 4} was partially oxidized with oxygen in a high-temperature fixed-bed quartz reactor charged with coke particles of 10 mm size. At 1200-1300{sup o}C, a CH{sub 4} conversion of {gt}99% could be obtained. The H{sub 2}/CO ratio in the synthesis product gas can be adjusted in the range 0.3-1.4, very favorable for further C1 synthesis. 10 refs., 17 figs., 1t ab.

  6. Investigations of mechanisms of microbial enhanced oil recovery by microbes and their metabolic products

    SciTech Connect

    Chase, K.L.; Bryant, R.S.; Bertus, K.M.; Stepp, A.K.

    1990-12-01

    Experiments at NIPER have demonstrated that oil mobilization by microbial formulations is not merely the result of the effects of the metabolic products from the in situ fermentation of nutrient. A combination of two microorganisms, Bacillus licheniformis, NIPER and a Clostridium species (NIPER 6) was determined to be an effective microbial formulation for the recovery of residual crude oil in porous media. Flask tests with various nutrients and environmental conditions were used to evaluate the growth and metabolite production of NIPER 1 and 6. Several interfacial tension (IFT) measurements were conducted using certain metabolic products from the combined microbial cultures NIPER 1 and NIPER 6. Nonane was used as the oil for these experiments, since crude oil from Delaware-Childers field emulsifies very easily. The IFT of a selected microbial formulation were measured with two different crude oils using brines of varying salinities. Comparisons were made with saline brines containing only the nutrient and with microbial metabolite solutions from which the active cells have been removed by filtration to isolate the specific effects of the microbial cells. Etched-glass micromodel studies showed that the microbial formulation effectively mobilized crude oil trapped after waterflooding. Wettability alteration and unsteady-state relative permeability tests were performed in Berea Sandstone cores. 16 refs., 17 figs., 12 tabs.

  7. Chaos of Wolbachia Sequences Inside the Compact Fig Syconia of Ficus benjamina (Ficus: Moraceae)

    PubMed Central

    Niu, Li-Ming; Ma, Guang-Chang; Cook, James M.; Bian, Sheng-Nan; Fu, Yue-Guan; Huang, Da-Wei

    2012-01-01

    Figs and fig wasps form a peculiar closed community in which the Ficus tree provides a compact syconium (inflorescence) habitat for the lives of a complex assemblage of Chalcidoid insects. These diverse fig wasp species have intimate ecological relationships within the closed world of the fig syconia. Previous surveys of Wolbachia, maternally inherited endosymbiotic bacteria that infect vast numbers of arthropod hosts, showed that fig wasps have some of the highest known incidences of Wolbachia amongst all insects. We ask whether the evolutionary patterns of Wolbachia sequences in this closed syconium community are different from those in the outside world. In the present study, we sampled all 17 fig wasp species living on Ficus benjamina, covering 4 families, 6 subfamilies, and 8 genera of wasps. We made a thorough survey of Wolbachia infection patterns and studied evolutionary patterns in wsp (Wolbachia Surface Protein) sequences. We find evidence for high infection incidences, frequent recombination between Wolbachia strains, and considerable horizontal transfer, suggesting rapid evolution of Wolbachia sequences within the syconium community. Though the fig wasps have relatively limited contact with outside world, Wolbachia may be introduced to the syconium community via horizontal transmission by fig wasps species that have winged males and visit the syconia earlier. PMID:23145008

  8. Evaluation of dust-related health hazards associated with air coring at G-Tunnel, Nevada Test Site

    SciTech Connect

    Skaggs, B.J.; Ortiz, L.W.; Burton, D.J.; Isom, B.L.; Vigil, E.A.

    1991-03-01

    The Yucca Mountain Project was established to evaluate the potential for storing high-level radioactive wastes in geologic formations. Hydrologists recommended that drilling or coring in support of characterization tests be performed dry. Dry drilling, or air coring, presents a concern about health protection for the drilling personnel. The rock generally has a high silica content, and natural zeolites are abundant. Some zeolites are fibrous, leading to concerns that inhalation may result in asbestos-like lung diseases. An industrial hygiene study (IH) was conducted as part of an air coring technical feasibility test. The IH study found the potential for exposures to airborne silica and nuisance dusts to be within regulatory requirements and determined the commercial dust control equipment monitored to be effective when used in conjunction with a good area ventilation system and sound IH practices. Fibrous zeolites were not detected. Recommendations for the Yucca Mountain studies are (1) dust collection and control equipment equivalent or superior to that monitored must be used for any dry drilling activity and must be used with good general dilution ventilation and local exhaust ventilation provided on major emission sources; (2) good industrial hygiene work practices must be implemented, including monitoring any area where zeolitic fibers are suspect; and (3) a study should be conducted to determine the biological effects of the fibrous zeolite, mordenite. 25 refs., 17 figs., 14 tabs.

  9. Mechanisms for selective agglomeration of coals

    SciTech Connect

    Wheelock, T.D.; Drzymala, J.; Allen, R.W.; Hu, Y.-C.; Tyson, D.; Xiaoping, Qiu; Lessa, A.

    1989-05-01

    Work continued on the basic mechanisms which underlie various processes for beneficiating aqueous suspensions of coal by selective agglomeration with oil. A new method was demonstrated for characterizing the agglomerability of coal suspensions. This method utilizes a photometric dispersion analyzer to monitor changes in the turbidity of a particle suspension as increasing amounts of oil are added to the suspension in a batch agglomeration test. Agglomeration of the particles leads to a marked decrease in the turbidity of the suspension. Another experimental technique was also demonstrated for characterizing oil agglomeration. This technique involves measuring the rate of growth of agglomerates in a continuous flow system operating under stead-state conditions. The data are analyzed by means of a population balance. The results of a preliminary set of experiments in which Indiana V seam coal was agglomerated with tetralin seemed to fit a particular growth model very well. Equipment was also constructed for studying the kinetics of agglomeration in a batch process. While earlier work showed that quebracho (a commercially available dispersant) is a strong agglomeration depressant for pyrite, recent experiments with mixtures of Upper Freeport coal and mineral pyrite showed that quebracho does not appear to be sufficiently selective. Further consideration was given to the separation of mixtures of coal and pyrite agglomeration with heptane. 2 refs., 17 figs., 1 tab.

  10. Paleotemperatures preserved in fluid inclusions in halite

    SciTech Connect

    Roberts, S.M.; Spencer, R.J.

    1995-10-01

    A variety of paleoclimate proxy records allow determination of relative warming or cooling. However, if we are to understand climate change, quantification of past temperature fluctuations is essential. Our research indicates that fluid inclusions in halite can yield homogenization temperatures that record surface brine temperatures at the time of halite precipitation. To avoid problems with stretching, leaking, and initial trapping of air, samples with primary, single-phase (liquid) fluid inclusions are chilled in a freezer to nucleate vapor bubbles. We tested the reliability of this method of obtaining fluid-inclusion homogenization temperatures using modern salts precipitated at Badwater Basin, Death Valley, California. Homogenization temperatures correlate well with measured brine temperatures. The same method is applied to fluid inclusions in Pleistocene halite from a core taken at the same location in Death Valley. Results are at several scales, recording diurnal temperature variations, seasonal temperature fluctuations, and longer-term warming and cooling events that correlate with major changes in the sedimentary environment related to climate. This technique is uniquely instrumental for paleoclimate studies because it offers actual, not just proxy, paleotemperature data. 27 refs., 17 figs.

  11. GENII: The Hanford Environmental Radiation Dosimetry Software System: Volume 2, Users' manual: Hanford Environmental Dosimetry Upgrade Project

    SciTech Connect

    Napier, B.A.; Peloquin, R.A.; Strenge, D.L.; Ramsdell, J.V.

    1988-11-01

    The Hanford Environmental Dosimetry Upgrade Project was undertaken to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) in updated versions of the environmental pathway analysis models used at Hanford. The resulting second generation of Hanford environmental dosimetry computer codes is compiled in the Hanford Environmental Dosimetry System (Generation II, or GENII). The purpose of this coupled system of computer codes is to analyze environmental contamination of, air, water, or soil. This is accomplished by calculating radiation doses to individuals or populations. GENII is described in three volumes of documentation. This second volume is a Users' Manual, providing code structure, users' instructions, required system configurations, and QA-related topics. The first volume describes the theoretical considerations of the system. The third volume is a Code Maintenance Manual for the user who requires knowledge of code detail. It includes logic diagrams, global dictionary, worksheets, example hand calculations, and listings of the code and its associated data libraries. 27 refs., 17 figs., 23 tabs.

  12. The International Coal Statistics Data Base operations guide

    SciTech Connect

    Not Available

    1991-04-01

    The International Coal Statistics Data base (ICSD) is a micro- computer based system which contains informations related to international coal trade. This includes coal production, consumption, imports and exports information. The ICSD is a secondary data base, meaning that information contained therein is derived entirely from other primary sources. It uses dBase 3+ and Lotus 1-2-3 to locate, report and display data. The system is used for analysis in preparing the Annual Prospects for World Coal Trade (DOE/EIA-0363) publication. The ICSD system is menu driven, and also permits the user who is familiar with dBase and Lotus operations to leave the menu structure to perform independent queries. Documentation for the ICSD consists of three manuals -- the User's Guide, the Operations Manual and the Program Maintenance Manual. This Operations Manual explains how to install the programs, how to obtain reports on coal trade, what systems requirements apply, and how to update the major data files. It also explains file naming conventions, what each file does, and the programming procedures used to make the system work. The Operations Manual explains how to make the system respond to customized queries. It is organized around the ICSD menu structure and describes what each selection will do. Sample reports and graphs generated from individual menu selection are provided to acquaint the user with the various types of output. 17 figs.

  13. Basis for the ICRP`s age-specific biokinetic model for uranium

    SciTech Connect

    Leggett, R.W.

    1994-12-01

    In an effort motivated largely by the Chernobyl nuclear accident, the International Commission on Radiological Protection (ICRP) is developing age-specific biokinetic models and dose coefficients for environmentally important radionuclides. This paper describes the ICRP`s age-specific biokinetic model for uranium. The model is constructed within a physiologically based framework originally developed for application to the alkaline earth elements but sufficiently general to apply to the larger class of bone-volume-seeking elements. Transfer rates for a reference adult are based mainly on: (1) measurements of uranium in blood and excreta of several human subjects who were intravenously injected with uranium; (2) postmortem measurements of uranium in tissues of some of those subjects; (3) postmortem measurements of uranium in tissues of occupationally and non-occupationally exposed subjects; (4) data on baboons, dogs, and smaller laboratory animals exposed to uranium for experimental purposes; and (5) consideration of the physiological processes thought to control retention and translocation of uranium in the body. Transfer rates for the adult are extended to children by application of a set of generic assumptions applied by the ICRP to calcium-like elements. These assumptions were derived mainly from observations of the age-specific biokinetics of the alkaline earth elements and lead in humans and laboratory animals but are consistent with available age-specific biokinetic data on uranium. 82 refs., 17 figs., 8 tabs.

  14. Determination of ecologically vital groundwaters at selected sites in the Formerly Utilized Sites Remedial Action Program

    SciTech Connect

    Vinikour, W.S.; Yin, S.C.L.

    1989-08-01

    The US Department of Energy is classifying groundwaters at sites in its Formerly Utilized Sites Remedial Action Program (FUSRAP). Of particular concern is the potential presence of groundwaters that are highly vulnerable to contamination and that are either (1) irreplaceable sources of drinking water or (2) ecologically vital. Conditions at nine FUSRAP sites were evaluated to determine if ecologically vital groundwaters are present. The sites evaluated were Wayne Interim Storage Site, Maywood Interim Storage Site, and Middlesex Sampling Plant in New Jersey; Ashland 2 Site, Seaway Industrial Park, Colonie Interim storage Site, and Niagara Falls Storage Site in New York; and the St. Louis Airport Site and Hazelwood Interim Storage Site in Missouri. The analyses indicated that groundwaters are vulnerable to contamination at all but two of the sites -- the Ashland 2 and Seaway Industrial Park sites in New York. Groundwater discharge points were identified within a 2-mile radius (i.e., the classification review area) of all of the sites. No ecologically vital groundwater areas exist in the vicinities of any of the nine FUSRAP sites evaluated. 35 refs., 17 figs.

  15. Fuels from microalgae

    SciTech Connect

    Not Available

    1989-06-01

    Many species of aquatic plants can provide a source of renewable energy. Some species of microalgae, in particular, produce lipids -- oils that can be extracted and converted to a diesel fuel substitute or to gasoline. Since 1979 the Aquatic Species Program element of the Biofuels Program, has supported fundamental and applied research to develop the technology for using this renewable energy resource. This document, produced by the Solar Technical Information Program, provides an overview of the DOE/SERI Aquatic Species Program element. Chapter 1 is an introduction to the program and to the microalgae. Chapter 2 is an overview of the general principles involved in making fuels from microalgae. It also outlines the technical challenges to producing economic, high-energy transportation fuels. Chapter 3 provides an overview of the Algal Production and Economic Model (APEM). This model was developed by researchers within the program to identify aspects of the process critical to performance with the greatest potential to reduce costs. The analysis using this model has helped direct research sponsored by the program. Finally, Chapter 4 provides an overview of the Aquatic Species Program and describes current research. 28 refs., 17 figs.

  16. Sea surface temperature and large-scale circulation influences on tropical greenhouse effect and cloud radiative forcing

    SciTech Connect

    Bony, S.; Lau, K.M.; Sud, Y.C.

    1997-08-01

    Two independent sets of meteorological reanalyses are used to investigate relationships between the tropical sea surface temperature (SST) and the large-scale vertical motion of the atmosphere for spatial and seasonal variations, as well as for El Nino/La Nina episodes of 1987-88. Supergreenhouse effect (SGE) situations are found to be linked to the occurrence of enhance large-scale rising motion associated with increasing SST. In regions where the large-scale atmospheric motion is largely decoupled from the local SST due to internal or remote forcings, the SGE occurrence is weak. On seasonal and interannual timescales, such regions are found mainly over equatorial regions of the Indian Ocean and western Pacific, especially for SSTs exceeding 29.5{degrees}C. In these regions, the activation of feedback processes that regulate the ocean temperature is thus likely to be more related to the large-scale remote processes, such as those that govern the monsoon circulations and the low-frequency variability of the atmosphere, than to the local SST change. The relationships among SST, clouds, and cloud radiative forcing inferred from satellite observations are also investigated. 57 refs., 17 figs., 2 tabs.

  17. Geographic analysis of thermal equilibria: A bioenergetic model for predicting thermal response of aquatic insect communities: Volume 1: Technical progress report, February 1, 1985-January 31, 1988

    SciTech Connect

    Vannote, R.L.; Sweeney, B.W.

    1987-01-01

    This report summarizes the principal research findings of both laboratory and field experiments on the effects of temperature on aquatic insects. It describes a large-scale laboratory experiment that tests the validity of a general model developed to predict the seasonal pattern of growth, development, and adult emergence of aquatic insect species at different locations in their geographic range. The report details the transition of the research program from its present focus on the ecology of stream and river insect populations to a program emphasizing the role of riparian biotic and geochemical factors in regulating the dynamics of stream systems. The long-term goals are to develop the functional relationships between alluvial floodplains and its drainage network. Initially, research will focus on mechanisms regulating input storage, transformation and release of nutrients between the riparian system and streams. Volume 1 reports on field studies of natural and thermally modified river systems, as well as laboratory studies on electrophoretic analysis of insects. 12 refs., 17 figs., 2 tabs.

  18. Protective supplied breathing air garment

    DOEpatents

    Childers, E.L.; Hortenau, E.F. von.

    1984-07-10

    A breathing air garment is disclosed for isolating a wearer from hostile environments containing toxins or irritants includes a suit and a separate head protective enclosure or hood engaging a suit collar in sealing attachment. The hood and suit collar are cylindrically shaped and dimensioned to enable the wearer to withdraw his hands from the suit sleeves to perform manual tasks within the hood interior. Breathing air is supplied from an external air line with an air delivery hose attached to the hood interior. The hose feeds air into an annular halo-like fiber-filled plenum having spaced discharge orifices attached to the hood top wall. A plurality of air exhaust/check valves located at the suit extremities cooperate with the hood air delivery system to provide a cooling flow of circulating air from the hood throughout the suit interior. A suit entry seal provided on the suit rear torso panel permits access into the suit and is sealed with an adhesive sealing flap. 17 figs.

  19. Reassessment of selected factors affecting siting of Nuclear Power Plants

    SciTech Connect

    Davis, R.E.; Hanson, A.L.; Mubayi, V.; Nourbakhsh, H.P.

    1997-02-01

    Brookhaven National Laboratory has performed a series of probabilistic consequence assessment calculations for nuclear reactor siting. This study takes into account recent insights into severe accident source terms and examines consequences in a risk based format consistent with the quantitative health objectives (QHOs) of the NRC`s Safety Goal Policy. Simplified severe accident source terms developed in this study are based on the risk insights of NUREG-1150. The results of the study indicate that both the quantity of radioactivity released in a severe accident as well as the likelihood of a release are lower than those predicted in earlier studies. The accident risks using the simplified source terms are examined at a series of generic plant sites, that vary in population distribution, meteorological conditions, and exclusion area boundary distances. Sensitivity calculations are performed to evaluate the effects of emergency protective action assumptions on the risk of prompt fatality and latent cancers fatality, and population relocation. The study finds that based on the new source terms the prompt and latent fatality risks at all generic sites meet the QHOs of the NRC`s Safety Goal Policy by margins ranging from one to more than three orders of magnitude. 4 refs., 17 figs., 24 tabs.

  20. Three-dimensional detailed numerical model of a field-scale rotary kiln incinerator

    SciTech Connect

    Leger, C.B.; Cundy, V.A.; Sterling, A.M. )

    1993-04-01

    A detailed three-dimensional numerical model of baseline (support burners only) operation in a rotary kiln incinerator is presented. The focus of this model is on gas-phase fluid mechanics, neglecting solid waste combustion and radiative heat transfer. The model is compared to experimental data, and although relatively crude, it demonstrates remarkably good qualitative and quantitative predictive capability. The model demonstrates that thermal buoyancy is the cause of observed vertical stratification near the exit of the modeled kiln. The model also suggests that the addition of turbulence mixing air actually increases the degree of stratification rather than augmenting mixing, as had been previously suggested. Elucidating the mechanism by which this occurs has resulted in a reinterpretation of the experimental data. The model also suggests that there is probably a zone of recirculation across the kiln exit plane. A parametric study using the model shows that the location and quantity of leak air into the kiln have a major influence on the flow inside the kiln. The study suggests that preheating turbulence air may have little effect on gas-phase mixing. Overall, this modeling study has demonstrated that a relatively simple numerical model of a rotary kiln incinerator can provide valuable insight into the process, especially when used in conjunction with experimental data. 21 refs., 17 figs., 3 tabs.

  1. A computer model of gas generation and transport within TRU waste drums

    SciTech Connect

    Smith, F.G. III

    1988-06-01

    A computer model has been developed to predict radiolytic gas generation and transport within Transuranic (TRU) waste drums and surrounding enclosures. Gas generation from the radiolytic decomposition of organic material contaminated with plutonium is modeled and the concentrations of gas throughout the waste drum and enclosures are determined using a diffusional transport model. The model accurately reproduces experimentally measured gas concentrations. With polyethylene waste in unvented drums, the model predicts that the concentration of hydrogen gas can exceed 4 mole percent (lower flammable limit) with only about 5 curies of plutonium. If the drum liner is punctured and an unrestricted 0.75-in. carbon composite filter vent is installed in the drum lid, the plutonium loading can be increased to 240 Ci without generating flammable gas mixtures. Larger diameter filters can be used to increase the curie loading. The model has been used to show that shipments of 1000 Ci of plutonium-238 contaminated waste from Savannah River to the WIPP site are feasible using the TRUPACT shipping container. 10 refs., 17 figs., 6 tabs.

  2. A coupled heat and water flow apparatus

    SciTech Connect

    Mohamed, A.M.O.; Caporouscio, F.; Yong, R.N. ); Cheung, C.H. ); Kjartanson, B.H. )

    1993-03-01

    Safe and permanent disposal of radioactive waste requires isolation of a number of diverse chemical elements form the environment. The Canadian Nuclear Fuel Waste Management Program is assessing the concept of disposing of waste in a vault excavated at a depth of 500 to 1000 m below the ground surface in plutonic rock of the Canadian Shield. The temperatures and hydraulic potential in the buffer and back fill material were investigated. To study the performance of a compacted buffer material under thermal and isothermal conditions, a coupled heat and water flow apparatus is designed and presented. In the preliminary design, a one-dimensional flow of heat and water was not achieved. however, control of temperature gradient, existence of one-dimensional flow, and uniformity of temperature and volumetric water content distributions at any cross section within the specimen are achieved in the modified design. Experimental results have shown that the temperature stabilizes very rapidly after a period of approximately 0. 107 days. The moisture moves away from the hot end along the longitudinal direction of the specimen due to imposed thermal gradient. The time required for moisture to stabilize is in order of days. 17 refs., 17 figs., 3 tabs.

  3. Hungry water: Effects of dams and gravel mining on river channels

    SciTech Connect

    Kondolf, G.M.

    1997-07-01

    Rivers transport sediment from eroding uplands to depositional areas near sea level. If the continuity of sediment transport is interrupted by dams or removal of sediment from the channel by gravel mining, the flow may become sediment-starved (hungry water) and prone to erode the channel bed and banks, producing channel incision (downcutting), coarsening of bed material, and loss of spawning gravels for salmon and trout (as smaller gravels are transported without replacement from upstream), Gravel is artificially added to the River Rhine to prevent further incision and to many other rivers in attempts to restore spawning habitat. It is possible to pass incoming sediment through some small reservoirs, thereby maintaining the continuity of sediment transport through the system. Damming and mining have reduced sediment delivery from rivers to many coastal areas, leading to accelerated beach erosion. Sand and gravel are mined for construction aggregate from river channel and floodplains. In-channel mining commonly causes incision, which may propagate up- and downstream of the mine, undermining bridges, inducing channel instability, and lowering alluvial water tables. Floodplain gravel pits have the potential to become wildlife habitat upon reclamation, but may be captured by the active channel and thereby become instream pits. Management of sand and gravel in rivers must be done on a regional basis, restoring the continuity of sediment transport where possible and encouraging alternatives to river-derived aggregate sources. 80 refs., 17 figs.

  4. Gamma ray emission from spheres pulsed with D-T neutrons: Results of May 1987 experiments at RTNS-1

    SciTech Connect

    Goldberg, E.; Hansen, L.F.; Howerton, R.J.; Komoto, T.T.; Pohl, B.A.

    1987-11-01

    Subsequent to the analysis of the June 1986 series of experiments at RTNS-1, we thought it sensible to repeat some of the experiments with greater care given to the high energy portions of the effluent gamma ray spectra. In addition, some new materials were recommended for study, such as silicon. And since among our earlier experiments we observed data which was not highly reproducible, repeated runs would provide a quantitative assessment of the precision of the experiments. Accordingly, we followed the procedure outlined in UCID-20884. First, we calibrated the NE-213 detector with standard gamma ray sources and checked for linearity of pulse height with energy deposited by electrons. We then conducted experiments at RTNS-1, using spherical configurations of C, Si, Al, H/sub 2/O, N/sub 2/,Ti, Fe, and C/sub 2/F/sub 4/. The H/sub 2/O was contained in a modified glass flask, while the liquid nitrogen was held in a double-walled steel dewar. 25 refs., 17 figs., 9 tabs.

  5. Development of on-farm oil recovery and processing methods: Final report

    SciTech Connect

    Goodrum, J.W.; Kilgo, M.B.

    1987-09-02

    Using supercritical carbon dioxide (SC-CO2), peanut oil was extracted from ground peanuts at pressures of 2000 to 10,000 psi and temperatures of 25-120/degree/ C. Above 6000 psi, increasing the temperature to the maximum possible without heavily charring the peanuts (120/degree/C) significantly increased the initial extraction rate. Increasing the pressure at constant temperature increased the rate. At higher temperatures (75/degree/ C and above) roasting began to occur, however, this was not detrimental to the extraction rate or overall oil recovery. Decreasing the particle size increases the overall yield per batch of peanuts as seen in both the half factorial and particle size experiments. Increasing the moisture increases the amount of volatiles lost. The flow rate does not affect the solubility, percent oil recovered or volatiles lost for flow rates of 40 to 60 liters CO2/minute at STP. Recovery of peanut and rapeseed oil with a combined process of partial recovery in a screw press plus extraction of the remaining oil with SC-CO2 is technically a viable alternative to other oil recovery methods. Oil recoveries of 95% (peanuts) and 75% (rapeseed) have been demonstrated. The initial extraction rate for rapeseed was consistently lower than the rate for peanuts at the same extraction temperature and pressure. No differences in SC-CO2 extraction rates or yields were found between Dwarf Essex and Cascade varieties of rapeseed. 8 refs., 17 figs., 5 tabs.

  6. Broadband measurements of electron cyclotron emission in TFTR (Tokamak Fusion Test Reactor) using a quasi-optical light collection system and a polarizing Michelson interferometer

    SciTech Connect

    Stauffer, F.J.; Boyd, D.A.; Cutler, R.C.; Diesso, M.; McCarthy, M.P.; Montague, J.; Rocco, R.

    1988-04-01

    For the past three years, a Fourier transform spectrometer diagnostic system, employing a fast-scanning polarizing Michelson interferometer, has been operating on the TFTR tokamak at Princeton Plasma Physics Laboratory. It is used to measure the electron cyclotron emission spectrum over the range 2.5 to 18 cm/sup /minus/1/ (75-540 GHz) with a resolution of 0.123 cm/sup /minus/1/(3.7 GHz), at a rate of 72 spectra per second. The quasi-optical system for collecting the light and transporting it through the interferometer to the detector has been designed using the concepts of both Gaussian and geometrical optics in order to produce a system that is efficient over the entire spectral range. The commerical Michelson interferometer was custom-made for this project and is at the state of the art for this type of specialized instrument. Various pre-installation and post-installation tests of the optical system and the interferometer were performed and are reported here. An error propagation analysis of the absolute calibration process is given. Examples of electron cyclotron emission spectra measured in two polarization directions are given, and electron temperature profiles derived from each of them are compared. 34 refs., 17 figs.

  7. Apparatus for and method of testing an electrical ground fault circuit interrupt device

    DOEpatents

    Andrews, L.B.

    1998-08-18

    An apparatus for testing a ground fault circuit interrupt device includes a processor, an input device connected to the processor for receiving input from an operator, a storage media connected to the processor for storing test data, an output device connected to the processor for outputting information corresponding to the test data to the operator, and a calibrated variable load circuit connected between the processor and the ground fault circuit interrupt device. The ground fault circuit interrupt device is configured to trip a corresponding circuit breaker. The processor is configured to receive signals from the calibrated variable load circuit and to process the signals to determine a trip threshold current and/or a trip time. A method of testing the ground fault circuit interrupt device includes a first step of providing an identification for the ground fault circuit interrupt device. Test data is then recorded in accordance with the identification. By comparing test data from an initial test with test data from a subsequent test, a trend of performance for the ground fault circuit interrupt device is determined. 17 figs.

  8. High speed transient sampler

    DOEpatents

    McEwan, T.E.

    1995-11-28

    A high speed sampler comprises a meandered sample transmission line for transmitting an input signal, a straight strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates along the transmission lines. The sampling gates comprise a four terminal diode bridge having a first strobe resistor connected from a first terminal of the bridge to the positive strobe line, a second strobe resistor coupled from the third terminal of the bridge to the negative strobe line, a tap connected to the second terminal of the bridge and to the sample transmission line, and a sample holding capacitor connected to the fourth terminal of the bridge. The resistance of the first and second strobe resistors is much higher than the signal transmission line impedance in the preferred system. This results in a sampling gate which applies a very small load on the sample transmission line and on the strobe generator. The sample holding capacitor is implemented using a smaller capacitor and a larger capacitor isolated from the smaller capacitor by resistance. The high speed sampler of the present invention is also characterized by other optimizations, including transmission line tap compensation, stepped impedance strobe line, a multi-layer physical layout, and unique strobe generator design. A plurality of banks of such samplers are controlled for concatenated or interleaved sample intervals to achieve long sample lengths or short sample spacing. 17 figs.

  9. Magnetospheric equilibrium with anisotropic pressure

    SciTech Connect

    Cheng, C.Z.

    1991-07-01

    Self-consistent magnetospheric equilibrium with anisotropic pressure is obtained by employing an iterative metric method for solving the inverse equilibrium equation in an optimal flux coordinate system. A method of determining plasma parallel and perpendicular pressures from either analytic particle distribution or particle distribution measured along the satellite's path is presented. The numerical results of axisymmetric magnetospheric equilibrium including the effects of finite beta, pressure anisotropy, and boundary conditions are presented for a bi-Maxwellian particle distribution. For the isotropic pressure cases, the finite beta effect produces an outward expansion of the constant magnetic flux surfaces in relation to the dipole field lines, and along the magnetic field the toroidal ring current is maximum at the magnetic equator. The effect of pressure anisotropy is found to further expand the flux surfaces outward. Along the magnetic field lines the westward ring current can be peak away from the equator due to an eastward current contribution resulting from pressure anisotropy. As pressure anisotropy increases, the peak westward current can become more singular. The outer boundary flux surface has significant effect on the magnetospheric equilibrium. For the outer flux boundary resembling dayside compressed flux surface due to solar wind pressure, the deformation of the magnetic field can be quite different from that for the outer flux boundary resembling the tail-like surface. 23 refs., 17 figs.

  10. Development of a current collection loss management system for SDI homopolar power supplies

    SciTech Connect

    Brown, D.W.

    1989-01-01

    High speed, high power density current collection systems have been identified as an enabling technology required to construct homopolar power supplies to meet SDI missions. This work is part of a three-year effort directed towards the analysis, experimental verification, and prototype construction of a current collection system designed to operate continuously at 2 kA/cm{sup 2}, at a rubbing speed of 200 m/s, and with acceptable losses in a space environment. To data, no system has achieved these conditions simultaneously. This is the annual report covering the second year period of performance on DOE contract DE-AC03-86SF16518. Major areas covered include design, construction and operation of a cryogenically cooled brush test rig, design and construction of a high speed brush test rig, optimization study for homopolar machines, loss analysis of the current collection system, and an application study which defines the air-core homopolar construction necessary to achieve the goal of 80--90 kW/kg generator power density. 17 figs., 2 tabs.

  11. The kinetics of hydrocarbon cracking

    SciTech Connect

    Groten, W.A.; Wojciechowski, B.W. )

    1993-03-01

    A general kinetic model which describes the catalytic cracking of pure hydrocarbons is presented. The model includes a monomolecular cracking path based on the Langmuir adsorption isotherm as well as a bimolecular path, following Rideal kinetics, which accounts for the possibility of a chain cracking mechanism being involved. Catalyst decay is accounted for using the time-on-stream-decay function. Fitting of experimental data from n-nonane cracking on USHY at 673 K, combined with Monte Carlo simulations indicates that, in that case, the total catalytic activity could include between 0 and 90% of activity due to chain processes. This large margin of error stems from the combined effects of a large decay rate, forcing the experimenter to use average conversion data, and of experimental error. Fitting of the model to previously published cracking data for 2-methylpentane on USHY showed that the model lacks a suitable parameter to account for thermal reactions which were not accounted for in the original data set. This observation supports the impression that the model is sensitive to departures from the postulated mechanism. The above kinetic model has also been fitted to the results of n-nonane cracking at three temperatures as well as to previously published data for various other linear paraffins. 32 refs., 17 figs., 6 tabs.

  12. Global normal-mode Rossby waves observed in stratospheric ozone data

    SciTech Connect

    Randel, W.J. )

    1993-02-01

    Westward-propagating Rossby normal-mode planetary waves are documented in stratospheric ozone data using Solar Backscatter Ultraviolet (SBUV) satellite measurements. These modes are evidenced by enhanced spectral power and near-global coherence for westward-traveling zonal wave 1 oscillations with periods of 5-10 days. The ozone waves have maxima in high latitudes of the middle stratosphere (due to transport) and over midlatitudes in the upper stratosphere (due to photochemistry). These modes are nearly continuous throughout the eight years of SBUV observations, with maximum global coherence during the equinoxes. The upper-stratospheric waves are symmetric (in phase) between hemispheres, even for modes previously identified as antisymmetric in geopotential height. This behavior is due to differing wave vertical structure in each hemisphere: the planetary temperature waves are nearly in phase in the upper stratosphere, even though the height waves are out of phase. The observed ozone waves are furthermore compared to calculations based on linear wave transport and photochemistry, incorporating derived wind and temperature fields. Good agreement is found, showing that normal modes provide an idealized context to study the linear wave behavior of trace constituents in the real atmosphere. 23 refs., 17 figs.

  13. Geochemical and geologic factors effecting the formulation of gas hydrate: Task No. 5, Final report

    SciTech Connect

    Kvenvolden, K.A.; Claypool, G.E.

    1988-01-01

    The main objective of our work has been to determine the primary geochemical and geological factors controlling gas hydrate information and occurrence and particularly in the factors responsible for the generation and accumulation of methane in oceanic gas hydrates. In order to understand the interrelation of geochemical/geological factors controlling gas hydrate occurrence, we have undertaken a multicomponent program which has included (1) comparison of available information at sites where gas hydrates have been observed through drilling by the Deep Sea Drilling Project (DSDP) on the Blake Outer Ridge and Middle America Trench; (2) regional synthesis of information related to gas hydrate occurrences of the Middle America Trench; (3) development of a model for the occurrence of a massive gas hydrate as DSDP Site 570; (4) a global synthesis of gas hydrate occurrences; and (5) development of a predictive model for gas hydrate occurrence in oceanic sediment. The first three components of this program were treated as part of a 1985 Department of Energy Peer Review. The present report considers the last two components and presents information on the worldwide occurrence of gas hydrates with particular emphasis on the Circum-Pacific and Arctic basins. A model is developed to account for the occurrence of oceanic gas hydrates in which the source of the methane is from microbial processes. 101 refs., 17 figs., 6 tabs.

  14. Leaching action of EJ-13 water on unirradiated UO{sub 2} surfaces under unsaturated conditions at 90{degree}C: Interim report

    SciTech Connect

    Wronkiewicz, D.J.; Bates, J.K.; Gerding, T.J.; Veleckis, E.; Tani, B.S.

    1991-07-01

    A set of experiments, based on the application of the Unsaturated Test method to the reaction of UO{sub 2} with EJ-13 water, has been conducted over a period of 182.5 weeks. One half of the experiments have been terminated, while one half are still ongoing. Solutions that have dripped from UO{sub 2} specimens have been analyzed for all experiments, while the reacted UO{sub 2} surfaces have been examined for only the terminated experiments. A pulse of uranium release from the UO{sub 2} solid, in conjunction with the formation of dehydrated schoepite on the surface of the UO{sub 2}, was observed during the 39- to 96-week period. Thereafter, the uranium release decreased and a second set of secondary phases was observed. The latter phases incorporate cations from the EJ-13 water and include boltwoodite, uranophane, sklodowskite, compreignacite, and schoepite. The experiments are being continued to monitor for additional changes in solution composition and secondary phase formation, and have now reached the 319-week period. 9 refs., 17 figs., 25 tabs.

  15. MESOILT2, a Lagrangian trajectory climatological dispersion model

    SciTech Connect

    Ramsdell, J.V. Jr.; Burk, K.W.

    1991-03-01

    The objective of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate the radiation dose that individuals could have received as a result of emissions from nuclear operations at the Hanford Site. An independent Technical Steering Panel (TSP) directs the project, which is conducted by the Pacific Northwest Laboratory (PNL). The TSP directed PNL to demonstrate that its recommended approach for dose reconstruction is technically feasible and practical. This demonstration was Phase 1 of the project. This report is specifically concerned with the approach that PNL recommends for dealing with the atmospheric pathway. The TSP established a model domain for the atmospheric pathway for Phase 1 that includes 10 counties in Washington and Oregon and covers several thousand square miles. It is unrealistic to assume that atmospheric models which estimate transport and diffusion based on the meteorological conditions near the point of release of material at the time of release are adequate for a region this large. As a result, PNL recommended use of a Lagrangian trajectory, puff dispersion model for the Phase I study. This report describes the MESOILT2 computer code and the atmospheric transport, diffusion, deposition, and depletion models used in Phase I. The contents of the report include a technical description of the models, a user's guide for the codes, and descriptions of the individual code elements. 53 refs., 17 figs., 5 tabs.

  16. Compositions for chromosome-specific staining

    DOEpatents

    Gray, J.W.; Pinkel, D.

    1998-05-26

    Methods and compositions for staining based upon nucleic acid sequence that employ nucleic acid probes are provided. The methods produce staining patterns that can be tailored for specific cytogenetic analyses. The probes are appropriate for in situ hybridization and stain both interphase and metaphase chromosomal material with reliable signals. The nucleic acid probes are typically of a complexity greater than 50 kb, the complexity depending upon the cytogenetic application. Methods are provided to disable the hybridization capacity of shared, high copy repetitive sequences and/or remove such sequences to provide for useful contrast. Still further methods are provided to produce chromosome-specific staining reagents which are made specific to the targeted chromosomal material, which can be one or more whole chromosomes, one or more regions on one or more chromosomes, subsets of chromosomes and/or the entire genome. Probes and test kits are provided for use in tumor cytogenetics, in the detection of disease related loci, in analysis of structural abnormalities, such as translocations, and for biological dosimetry. Methods and prenatal test kits are provided to stain targeted chromosomal material of fetal cells, including fetal cells obtained from maternal blood. The invention provides for automated means to detect and analyze chromosomal abnormalities. 17 figs.

  17. Rapid sulfur capture studies at high temperatures

    SciTech Connect

    Richards, G.A.; Lawson, W.F.; Maloney, D.J.; Shaw, D.W.

    1990-12-01

    Determine conditions that would reproduce optimum sulfur capture ( super-equilibrium'') behavior. No attempt was made to extract kinetic data for calcination or sulfur capture, as might be done in a comprehensive study of sorbent behavior. While some interesting anomalies are present in the calcination data and in the limited surface area data, no attempt was made to pursue those issues. Since little sulfur capture was observed at operating conditions where super-equilibrium'' might be expected to occur, tests were stopped when the wide range of parameters that were studied failed to produce significant sulfur capture via the super-equilibrium mechanism. Considerable space in this report is devoted to a description of the experiment, including details of the GTRC construction. This description is included because we have received requests for a detailed description of the GTRC itself, as well as the pressurized dry powder feed system. In addition, many questions about accurately sampling the sulfur species from a high-temperature, high-pressure reactor were raised during the course of this investigation. A full account of the development of the gas and particulate sampling train in thus provided. 8 refs., 17 figs., 2 tabs.

  18. Stress corrosion cracking of alloy 600 using the constant strain rate test

    SciTech Connect

    Bulischeck, T. S.; van Rooyen, D.

    1980-01-01

    The most recent corrosion problems experienced in nuclear steam generators tubed with Inconel alloy 600 is a phenomenon labeled ''denting''. Denting has been found in various degrees of severity in many operating pressurized water reactors. Laboratory investigations have shown that Inconel 600 exhibits intergranular SCC when subjected to high stresses and exposed to deoxygenated water at elevated temperatures. A research project was initiated at Brookhaven National Laboratory in an attempt to improve the qualitative and quantitative understanding of factors influencing SCC in high temperature service-related environments. An effort is also being made to develop an accelerated test method which could be used to predict the service life of tubes which have been deformed or are actively denting. Several heats of commercial Inconel 600 tubing were procured for testing in deaerated pure and primary water at temperatures from 290 to 365/sup 0/C. U-bend type specimens were used to determine crack initiation times which may be expected for tubes where denting has occurred but is arrested and provide baseline data for judging the accelerating effects of the slow strain rate method. Constant extension rate tests were employed to determine the crack velocities experienced in the crack propagation stage and predict failure times of tubes which are actively denting. 8 refs., 17 figs., 5 tabs.

  19. Tritium monitoring system for near ambient measurements

    SciTech Connect

    Falter, K.G.; Bauer, M.L.

    1991-01-01

    This paper describes the current status of research on an improved tritium measurement system at the Oak Ridge National Laboratory (ORNL) for the US Navy. Present tritium-in-air monitoring systems installed by the Navy can reliably measure to less than 10 {mu}Ci/m{sup 3}, but medical and safety issues are pushing measurement needs to below 1 {mu}Ci/m{sup 3}, which is equivalent to 1--10 nCi/ml in liquid samples, using calcium metal converter. A significant effort has been expended over the past 10 years by the Navy RADIAC Development Program at ORNL on various schemes to improve the detection of tritium in both air and liquid at near ambient levels. One such scheme includes a liquid flow-through system based on an NE102 sponge scintillator with dual photomultiplier tubes for the tube noise rejection. (This document also contains copies of the slides used for presentation of this paper to the IEEE 1991 Nuclear Science Symposium). 4 refs., 17 figs.

  20. Direct conversion of methane to C sub 2 's and liquid fuels

    SciTech Connect

    Warren, B.K.; Campbell, K.D.

    1989-11-22

    Objectives of the project are to discover and evaluate novel catalytic systems for the conversion of methane or by-product light hydrocarbon gases either indirectly (through intermediate light gases rich in C{sub 2}'s) or directly to liquid hydrocarbon fuels, and to evaluate, from an engineering perspective, different conceptualized schemes. The approach is to carry out catalyst testing on several specific classes of potential catalysts for the conversion of methane selectively to C{sub 2} products. Promoted metal oxide catalysts were tested. Several of these exhibited similar high ethylene to ethane ratios and low carbon dioxide to carbon monoxide ratios observed for the NaCl/{alpha}-alumina catalyst system reported earlier. Research on catalysts containing potentially activated metals began with testing of metal molecular sieves. Silver catalysts were shown to be promising as low temperature catalysts. Perovskites were tested as potential methane coupling catalysts. A layered perovskite (K{sub 2}La{sub 2}Ti{sub 3}O{sub 10}) gave the highest C{sub 2} yield. Work continued on the economic evaluation of a hypothetical process converting methane to ethylene. An engineering model of the methane coupling system has been prepared. 47 refs., 17 figs., 57 tabs.

  1. Computer modeling of fluid flow and combustion in the ISV (In Situ Vitrification) confinement hood

    SciTech Connect

    Johnson, R.W.; Paik, S.

    1990-09-01

    Safety and suitability objectives for the application of the In Situ Vitrification (ISV) technology at the INEL require that the physical processes involved in ISVV be modeled to determine their operational behavior. The mathematical models that have been determined to address the modeling needs adequately for the ISV analysis package are detailed elsewhere. The present report is concerned with the models required for simulating the reacting flow that occurs in the ISV confinement hood. An experimental code named COYOTE has been secured that appears adequate to model the combustion in the confinement hood. The COYOTE code is a two-dimensional, transient, compressible, Eulerian, gas dynamics code for modeling reactive flows. It recognizes nonuniform Cartesian and cylindrical geometry and is based on the ICE (Implicit Continuous-fluid Eulerian) family of solution methods. It includes models for chemical reactions based on chemical kinetics as well as equilibrium chemistry. The mathematical models contained in COYOTE, their discrete analogs, the solution procedure, code structure and some test problems are presented in the report. 12 refs., 17 figs., 6 tabs.

  2. Recommendations for the shallow-crack fracture toughness testing task within the HSST (Heavy-Section Steel Technology) Program

    SciTech Connect

    Theiss, T.J. )

    1990-09-01

    Recommendations for Heavy-Section Steel Technology Program's investigation into the influence of crack depth on the fracture toughness of a steel prototypic of those in a reactor pressure vessel are included in this report. The motivation for this investigation lies in the fact that probabilistic fracture mechanics evaluations show that shallow flaws play a dominant role in the likelihood of vessel failure, and shallow-flaw specimens have exhibited an elevated toughness compared with conventional deep-notch fracture toughness specimens. Accordingly, the actual margin of safety of vessels may be greater than that predicted using existing deep-notch fracture-toughness results. The primary goal of the shallow-crack project is to investigate the influence of crack depth on fracture toughness under conditions prototypic of a reactor vessel. A limited data base of fracture toughness values will be assembled using a beam specimen of prototypic reactor vessel material and with a depth of 100 mm (4 in.). This will permit comparison of fracture-toughness data from deep-cracked and shallow-crack specimens, and this will be done for several test temperatures. Fracture-toughness data will be expressed in terms of the stress-intensity factor and crack-tip-opening displacement. Results of this investigation are expected to improve the understanding of shallow-flaw behavior in pressure vessels, thereby providing more realistic information for application to the pressurized-thermal shock issues. 33 refs., 17 figs.

  3. Torsional rheometer for granular materials slurries and gas-solid mixtures and related methods

    DOEpatents

    Rajagopal, C.; Rajagopal, K.R.; Yalamanchili, R.C.

    1997-03-11

    A torsional rheometer apparatus for determining rheological properties of a specimen is provided. A stationary plate and a rotatable plate are in generally coaxial position and structured to receive a specimen there between. In one embodiment, at least one of the plates and preferably both have roughened specimen engaging surfaces to serve to reduce undesired slippage between the plate and the specimen. A motor is provided to rotate the rotatable plate and a transducer for monitoring forces applied to the stationary plate and generating output signals to a computer which determines the desired rheological properties are provided. In one embodiment, the roughened surfaces consist of projections extending toward the specimen. Where granular material is being evaluated, it is preferred that the roughness of the plate is generally equal to the average size of the granular material being processed. In another embodiment, an air-solid mixture is processed and the roughened portions are pore openings in the plates. Air flows through the region between the two pore containing plates to maintain the solid materials in suspension. In yet another embodiment, the base of the stationary plate is provided with a deformable capacitance sensor and associated electronic means. 17 figs.

  4. Gas stream cleanup

    SciTech Connect

    Bossart, S.J.; Cicero, D.C.; Zeh, C.M.; Bedick, R.C.

    1990-08-01

    This report describes the current status and recent accomplishments of gas stream cleanup (GSCU) projects sponsored by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The primary goal of the Gas Stream Cleanup Program is to develop contaminant control strategies that meet environmental regulations and protect equipment in advanced coal conversion systems. Contaminant control systems are being developed for integration into seven advanced coal conversion processes: Pressurized fludized-bed combustion (PFBC), Direct coal-fueled turbine (DCFT), Intergrated gasification combined-cycle (IGCC), Gasification/molten carbonate fuel cell (MCFC), Gasification/solid oxide fuel cell (SOFC), Coal-fueled diesel (CFD), and Mild gasification (MG). These advanced coal conversion systems present a significant challenge for development of contaminant control systems because they generate multi-contaminant gas streams at high-pressures and high temperatures. Each of the seven advanced coal conversion systems incorporates distinct contaminant control strategies because each has different contaminant tolerance limits and operating conditions. 59 refs., 17 figs., 5 tabs.

  5. Preliminary report on fluid inclusions from halites in the Castile and lower Salado formations of the Delaware Basin, southeastern New Mexico. [Freezing-point depression

    SciTech Connect

    Stein, C.L.

    1985-09-01

    A suite of samples composed primarily of halite from the upper Castile and lower Salado Formations of the Permian Basin was selected from Waste Isolation Pilot Plant (WIPP) core for a reconnaissance study of fluid inclusions. Volume percent of these trapped fluids averaged 0.7% to 1%. Freezing-point depressions varied widely and appeared to be unrelated to fluid-inclusion type, to sedimentary facies, or to stratigraphic depth. However, because very low freezing points were usually associated with anhydrite, a relation may exist between freezing-point data and lithology. Dissolved sulfate values were constant through the Castile, then decreased markedly with lesser depth in the lower Salado. This trend correlates very well with observed mineralogy and is consistent with an interpretation of the occurrence of secondary polyhalite as a result of gypsum or anhydrite alteration with simultaneous consumption of dissolved sulfate from the coexisting fluids. Together with the abundance and distribution of fluid inclusions in primary or ''hopper'' crystal structures, this evidence suggests that inclusions seen in these halites did not migrate any significant geographical distance since their formation. 28 refs., 17 figs., 2 tabs.

  6. Precise leveling determination of surface uplift patterns at the New Hydraulic Fracturing Facility, Oak Ridge National Laboratory

    SciTech Connect

    Haase, C.S.; Stow, S.H.

    1988-05-01

    Surface uplift patterns were determined for five grout injections at the New Hydrofracture Facility (NHF) during the period July 1983 through January 1984. The uplift patterns are complex. In plan view, they are elliptical to almost circular and exhibit varying degrees of cross-sectional asymmetry with one side steeper than the other. The long axis of the ellipse is more or less parallel to geological strike. The uplift patterns vary in size, shape and asymmetry from injection to injection. The region of maximum uplift is typically offset with respect to the injection point, suggesting that most hydrofracture injections dip to the south-southeast. Approximately 40 to 60% of the uplift measured 5 days after an injection subsided within 30 to 45 days. In one case, all of the uplift subsided within 70 days of injection. Modeling of the uplift patterns by simple models, based on homogeneous, isotropic subsurface conditions, suggests that hydrofractures produced by the injections are either horizontal or have shallow dips to the south-southeast. Such orientations are consistent with the hydrofracture orientations determined by gamma-ray logging in observation wells surrounding the NHF site. 19 refs., 17 figs., 1 tab.

  7. The OZI rule: A unique selector of glueballs and hadron spectroscopy

    SciTech Connect

    Lindenbaum, S.J. City Coll., New York, NY )

    1990-08-06

    In the first part of this talk I have reviewed the history of the OZI rule. I then have shown how it is a unique selector glueballs and new quarks in hadron spectroscopy. In particular the only glueball candidates which cannot be explained by other hypotheses within QCD are the I{sup G}J{sup PC} = 0{sup +}2{sup ++} g{sub T}(2010), g{sub T},(2300) and g{sub T{double prime}}(2340) observed in the OZI suppressed reaction {pi}{sup {minus}} p {yields} {phi}{phi}n. The narrowness of the J/{psi} and T can only be explained by OZI suppression. I then reminisced about the 1954 Rochester Conference in which our work on {pi}{sup {plus minus}}p total cross sections and {pi}{sup {plus minus}} production combined gave convincing evidence for the delta being the first resonance. Described how the 1964 Dubna Conference results on small angle {pi}{sup {plus minus}}p elastic scattering led to the first critical experimental check of the pion-nucleon forward dispersion relations which showed that the basic axions of modern field theory worked on strong interactions at high energies. I finally reminisced about glueballs in the 1982 and 1988 Rochester Conferences. 52 refs., 17 figs., 3 tabs.

  8. In-Home Performance of Exempt Pellet Stoves in Medford, Oregon.

    SciTech Connect

    Barnett, Stockton G.; Fields, Paula G.

    1991-07-05

    Pellet stoves that are considered exempt'' operate at an air-to-fuel ratio in excess of 35:1. They therefore qualify for exemption from the emissions certification process. A primary goal of this project was to determine how a sample of such stoves, operated in homes, would perform compared to their certified cousins,'' which were evaluated the previous year. In-home performance data documenting emissions from exempt stoves and net delivered efficiencies was particularly desired. This project evaluated six pellet stoves representing three major brands in Medford, Oregon. There were three Breckwell model P24FS, one Horizon Eclipse, one Horizon Destiny, and one Earth Stove TP40. The stoves were monitored for four week-long intervals in January and February 1991, for a total of 24 tests. Evaluations were conducted for particulate, CO (carbon monoxide) and PAH (polycyclic aromatic hydrocarbon) emissions and net efficiency. Monitoring was conducted using the AWES (automated woodstove emissions sampler) sampling system. A new data logger, developed for this project, was used to control the AWES and record real time data. 22 refs., 17 figs., 6 tabs.

  9. Steam-explosion safety considerations for the Advanced Neutron Source Reactor at the Oak Ridge National Laboratory

    SciTech Connect

    Taleyarkhan, R.

    1990-02-01

    This report provides a perspective on steam-explosion safety and design issues for the Advanced Neutron Source (ANS) reactor being designed at the Oak Ridge National Laboratory. A historical background along with a description of experiments and analytical work performed to date has been provided. Preliminary analyses (for the ANS) have been conducted to evaluate steam-explosion pressure- pulse loadings, the effects of reactor coolant system (RCS) overpressurization, and slug energetics. The method used for pressure-pulse magnitude evaluation was benchmarked with previous calculations, an aluminum-water steam-explosion experiment, and test reactor steam explosion data with good agreement. Predicted pressure-pulse magnitudes evaluated were found to be several orders of magnitude lower than corresponding values evaluated by correlating available energies with shock-wave pressures from equivalent chemical detonations. The preliminary best estimate, as well as conservative estimates for RCS volume-pressurization failure and slug energetics for RCS volume-pressurization failure and slug energetics, indicated that (1) steam explosions in the ANS have significant damage potential, and (2) steam-explosion issues must be considered during the design phase of the ANS Project. Recommendations are made for efficiently addressing this important safety and design issue. 38 refs., 17 figs., 11 tabs.

  10. Chaos of Wolbachia sequences inside the compact fig syconia of Ficus benjamina (Ficus: moraceae).

    PubMed

    Yang, Chun-Yan; Xiao, Jin-Hua; Niu, Li-Ming; Ma, Guang-Chang; Cook, James M; Bian, Sheng-Nan; Fu, Yue-Guan; Huang, Da-Wei

    2012-01-01

    Figs and fig wasps form a peculiar closed community in which the Ficus tree provides a compact syconium (inflorescence) habitat for the lives of a complex assemblage of Chalcidoid insects. These diverse fig wasp species have intimate ecological relationships within the closed world of the fig syconia. Previous surveys of Wolbachia, maternally inherited endosymbiotic bacteria that infect vast numbers of arthropod hosts, showed that fig wasps have some of the highest known incidences of Wolbachia amongst all insects. We ask whether the evolutionary patterns of Wolbachia sequences in this closed syconium community are different from those in the outside world. In the present study, we sampled all 17 fig wasp species living on Ficus benjamina, covering 4 families, 6 subfamilies, and 8 genera of wasps. We made a thorough survey of Wolbachia infection patterns and studied evolutionary patterns in wsp (Wolbachia Surface Protein) sequences. We find evidence for high infection incidences, frequent recombination between Wolbachia strains, and considerable horizontal transfer, suggesting rapid evolution of Wolbachia sequences within the syconium community. Though the fig wasps have relatively limited contact with outside world, Wolbachia may be introduced to the syconium community via horizontal transmission by fig wasps species that have winged males and visit the syconia earlier.

  11. Method and apparatus for assembling solid oxide fuel cells

    DOEpatents

    Szreders, B.E.; Campanella, N.

    1988-05-11

    This invention relates generally to solid oxide fuel power generators and is particularly directed to improvements in the assembly and coupling of solid oxide fuel cell modules. A plurality of jet air tubes are supported and maintained in a spaced matrix array by a positioning/insertion assembly for insertion in respective tubes of a solid oxide fuel cell (SOFC) in the assembly of an SOFC module. The positioning/insertion assembly includes a plurality of generally planar, elongated, linear vanes which are pivotally mounted at each end thereof to a support frame. A rectangular compression assembly of adjustable size is adapted to receive and squeeze a matrix of SOFC tubes so as to compress the inter-tube nickel felt conductive pads which provide series/parallel electrical connection between adjacent SOFCs, with a series of increasingly larger retainer frames used to maintain larger matrices of SOFC tubes in position. Expansion of the SOFC module housing at the high operating temperatures of the SOFC is accommodated by conductive, flexible, resilient expansion, connector bars which provide support and electrical coupling at the top and bottom of the SOFC module housing. 17 figs.

  12. Modeling climate related feedback processes

    SciTech Connect

    Elzen, M.G.J. den; Rotmans, J. )

    1993-11-01

    In order to assess their impact, the feedbacks which at present can be quantified reasonably are built into the Integrated Model to Assess the Greenhouse Effect (IMAGE). Unlike previous studies, this study describes the scenario- and time-dependent role of biogeochemical feedbacks. A number of simulation experiments are performed with IMAGE to project climate changes. Besides estimates of their absolute importance, the relative importance of individual biogeochemical feedbacks is considered by calculating the gain for each feedback process. This study focuses on feedback processes in the carbon cycle and the methane (semi-) cycle. Modeled feedbacks are then used to balance the past and present carbon budget. This results in substantially lower projections for atmospheric carbon dioxide than the Intergovernmental Panel on Climate Change (IPCC) estimates. The difference is approximately 18% from the 1990 level for the IPCC [open quotes]Business-as-Usual[close quotes] scenario. Furthermore, the IPCC's [open quotes]best guess[close quotes] value of the CO[sub 2] concentration in the year 2100 falls outside the uncertainty range estimated with our balanced modeling approach. For the IPCC [open quotes]Business-as-Usual[close quotes] scenario, the calculated total gain of the feedbacks within the carbon cycle appears to be negative, a result of the dominant role of the fertilization feedback. This study also shows that if temperature feedbacks on methane emissions from wetlands, rice paddies, and hydrates do materialize, methane concentrations might be increased by 30% by 2100. 70 refs., 17 figs., 7 tabs.

  13. Navy Radon Assessment and Mitigation Program

    SciTech Connect

    Bertini, H.W.; Dudney, C.S.; Wilson, D.L.; Wright, T.

    1990-12-01

    During the reporting period, June, 1 1989, through May 30, 1990, radon detectors were sent to all Department of the Navy installations that contained housing areas, childcare centers, schools, hospitals, bachelor quarters, and brigs. This action was part of the screening phase of the Navy Radon Assessment and Mitigation Program. Because of detector losses, a few facilities will require rescreening. The length of time the detectors are exposed in the buildings is dependent on the time or year they were placed and the time when the doors and windows are normally closed. A 3-month exposure time is sufficient for facilities that placed detectors in building when they would be closed. Otherwise detectors will be exposed for about 1 year. To date, about 9,000 detectors (out of a total of 27,100 detectors sent to the field) have been returned for a determination of exposure levels. About 2,000 detectors have been analyzed and the information sent to the Navel Facilities Engineering Command Headquarters for forwarding to the installations. Except for the additional installations requiring rescreening, the screening effort results should be available this calendar year. The rescreening results should be available by mid-1991. Assessment will start this calendar year based on the results from screening. Initial emphasis will be on housing, child-care centers, schools, and hospitals. 6 refs., 17 figs., 16 tabs.

  14. The comparative uptake and interaction of several radionuclides in the trophic levels surrounding the Los Alamos Meson Physics Facility (LAMPF) waste water ponds

    SciTech Connect

    Brooks, G.H. Jr.

    1989-08-01

    A study was undertaken to examine the uptake, distribution, and interaction of five activation products (Co-57, Be-7, Cs-134, Rb-83, and Mn-54) within the biotic and abiotic components surrounding the waste treatment lagoons of the Los Alamos Meson Physics Facility (LAMPF). The study attempted to ascertain where, and what specific interactions were taking place among the isotopes and the biotic/abiotic components. A statistical approach, utilizing Multivariate Analysis of Variance (MANOVA), was conducted testing the radioisotopic concentrations by (1) the trophic levels (TROPLVL) in each position sampled on the grid, (2) where sampled on the grid (TRAN), (3) where sampled with-in each grid line (PLOT), and (4) the side with which sampled (SIDE). This provided both the dependent and independent variables that would be tested. The Null Hypothesis (Ho) tested the difference in the mean values of the isotopes within/between each of the four independent variables. The Rb-83 statistic indicated an accumulation within the TRAN and PLOT variables within the sampled area. The Co-57 test statistic provided a value which indicated that accumulation of this isotope within TROPLVL was taking place. Mn-54 test values indicated that accumulation was also taking place at the higher trophic levels within the PLOT, TRAN, and SIDE positions. Cs-134 was found to accumulate to third level in this trophic level structure (TROPLVL-(vegetation)), and then decrease from there. The Be-7 component provided no variance from known compartmental transfers. 210 refs., 17 figs., 4 tabs.

  15. Genesis of presolar diamonds: Comparative high-resolution transmission electron microscopy study of meteoritic and terrestrial nano-diamonds

    SciTech Connect

    Daulton, T.L. |; Eisenhour, D.D.; Buseck, P.R.

    1996-12-01

    Nano-diamonds isolated from acid dissolution residues of primitive carbonaceous meteorites (Allende and Murchison) were studied using high-resolution transmission electron microscopy. To discriminate among their most likely formation mechanisms, high-pressure shock-induced metamorphism or low-pressure vapor condensation. the microstructures of presolar diamond crystallites were compared to those of (terrestrial) synthesized nano-diamonds. The synthesized diamonds used for comparison in this study were produced by high-pressure shock waves generated in controlled detonations and by direct nucleation and homoepitaxial growth from the vapor phase in low-pressure chemical vapor deposition (CVD)-type processes. Microstructural features were identified that appear unique to shock metamorphism and to nucleation from the vapor phase, respectively. A comparison of these features to the microstructures found in presolar diamonds indicates that the predominant mechanism for presolar diamond formation is a vapor deposition process, suggesting a circumstellar condensation origin. A new presolar grain component has also been identified in the meteoritic residues, the (2H) hexagonal polytype of diamond (lonsdaleite). 93 refs., 17 figs., 1 tab.

  16. Test design description for the Fusion Materials Open Test Assembly (Fusion MOTA-2A): Volume 1A, Part 1

    SciTech Connect

    Bauer, R.E.

    1988-11-01

    This document encompasses the test requirements, hardware design, fabrication, and safety analysis for the Fusion Materials Open Test Assembly experiment for irradiation in FFTF Cycle 11 (Fusion MOTA-2A). Fusion MOTA is equally shared by the US Fusion Material (DOE), Japanese Fusion Materials (MONBUSHO), and BEATRIX-II (IEA) programs. In the interest of providing optimum use of the irradiation space in the Fusion MOTA-2A and LMR MOTA-1G, eight of the Fusion MOTA canisters will be placed in MOTA-1G and an equal number of LMR canisters placed in Fusion MOTA-2A (Powell/Doran 1988). This eliminates the need to process Fusion MOTA-2A through the IEM cell prior to insertion for FFTF Cycle 11A. The LMR MOTA design and safety analysis (Greenslade 1984) is the basis for much of this design and safety analysis report. This design description and safety analysis for the Fusion MOTA-2A is presented per the outline given in Chapter IV of the FTR User`s Guide (Taylor 1978). 35 refs., 17 figs., 9 tabs.

  17. Sintering behavior of doped ZnO powders for high field varistors

    SciTech Connect

    Ghirlanda, M.

    1990-08-01

    The sintering of ZnO varistor precursor powders, doped with Co, Mn and different concentrations of Bi and Al, is investigated and discussed in relation with sintering models. One purpose of the present study is to provide information valuable for the fabrication of high field varistors. As the fundamental parameter of these electronic components is the breakdown voltage per unit of thickness, which is determined by the number of grain boundaries per linear dimension, the grain size and the sintered density are crucial variables, and the sintering is a central step in the manufacturing of such varistors. Sintering experiments performed at constant heating rate in a loading dilatometer provide data on the densification and creep of the compacted powders. Another goal of the present study is to provide an experimental basis for the interpretation of the evolution of the ratio between densification rate and creep rate in terms of competition between densification and microstructure coarsening. This is accomplished by taking advantage of the variety of sintering behaviors that takes place in the system ZnO-Bi-Al: the comparison of these behaviors allows us to correlate the macroscopic sintering parameters to the evolution of the microstructure. It results that, while in non-doped powders densification and coarsening develop in a balanced way, resulting in the constancy of the ratio between densification rate and creep rate, the effect of the dopants on the sintering kinetics alters such a balance, leading this ratio to vary. 17 figs.

  18. Two-dimensional diffusion limited system for cell growth

    SciTech Connect

    Hlatky, L.

    1985-11-01

    A new cell system, the ''sandwich'' system, was developed to supplement multicellular spheroids as tumor analogues. Sandwiches allow new experimental approaches to questions of diffusion, cell cycle effects and radiation resistance in tumors. In this thesis the method for setting up sandwiches is described both theoretically and experimentally followed by its use in x-ray irradiation studies. In the sandwich system, cells are grown in a narrow gap between two glass slides. Where nutrients and waste products can move into or out of the local environment of the cells only by diffusing through the narrow gap between the slides. Due to the competition between cells, self-created gradients of nutrients and metabolic products are set up resulting in a layer of cells which resembles a living spheroid cross section. Unlike the cells of the spheroid, however, cells in all regions of the sandwich are visible. Therefore, the relative sizes of the regions and their time-dependent growth can be monitored visually without fixation or sectioning. The oxygen and nutrient gradients can be ''turned off'' at any time without disrupting the spatial arrangement of the cells by removing the top slide of the assembly and subsequently turned back on if desired. Removal of the top slide also provides access to all the cells, including those near the necrotic center, of the sandwich. The cells can then be removed for analysis outside the sandwich system. 61 refs., 17 figs.

  19. RF driven sulfur lamp having driving electrodes which face each other

    DOEpatents

    Gabor, G.; Orr, T.R.; Greene, C.M.; Crawford, D.G.; Berman, S.M.

    1999-06-22

    A high intensity discharge lamp without mercury is disclosed radiating a selected spectrum of which can be almost entirely in the visible range from an envelope that contains a sulfur containing substance. The lamp utilizes a signal source that generates an excitation signal that is externally coupled to the exterior surface of the envelope to excite the enclosed sulfur containing substance. Various embodiments of the lamp use electrodes adjacent the envelope to couple the excitation signal thereto with the face of the electrodes shaped to complement the shape of the exterior surface of the envelope. Two shapes discussed are spherical and cylindrical. To minimize filamentary discharges each envelope may include an elongated stem affixed to the exterior thereof whereby a rotational subsystem spins the envelope. In yet another embodiment the envelope has a Dewar configuration with two electrodes, one positioned near the external curved side surface of the body, and a second to the inner surface of the hole through the envelope. Further, the envelope may contain a backfill of a selected inert gas to assist in the excitation of lamp with that backfill at a pressure of less than 1 atmosphere, wherein the backfill pressure is directly related to the increase or decrease of peak output and inversely related to the increase and decrease of the emitted spectrum from the envelope. The emitting fill can be less than 6 mg/cc, or at least 2 mg/cc of the envelope of a sulfur containing substance. 17 figs.

  20. RF driven sulfur lamp having driving electrodes arranged to cool the lamp

    DOEpatents

    Gabor, G.; Orr, T.R.; Greene, C.M.; Crawford, D.G.; Berman, S.M.

    1998-10-20

    A high intensity discharge lamp without mercury is disclosed radiating a selected spectrum of which can be almost entirely in the visible range from an envelope that contains a sulfur containing substance. The lamp utilizes a signal source that generates an excitation signal that is externally coupled to the exterior surface of the envelope to excite the enclosed sulfur containing substance. Various embodiments of the lamp use electrodes adjacent the envelope to couple the excitation signal thereto with the face of the electrodes shaped to complement the shape of the exterior surface of the envelope. Two shapes discussed are spherical and cylindrical. To minimize filamentary discharges each envelope may include an elongated stem affixed to the exterior thereof whereby a rotational subsystem spins the envelope. In yet another embodiment the envelope has a Dewar configuration with two electrodes, one positioned near the external curved side surface of the body, and a second to the inner surface of the hole through the envelope. Further, the envelope may contain a backfill of a selected inert gas to assist in the excitation of lamp with that backfill at a pressure of less than 1 atmosphere, wherein the backfill pressure is directly related to the increase or decrease of peak output and inversely related to the increase and decrease of the emitted spectrum from the envelope. The emitting fill can be less than 6 mg/cc, or at least 2 mg/cc of the envelope of a sulfur containing substance. 17 figs.

  1. Halbach array DC motor/generator

    DOEpatents

    Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

    1998-01-06

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

  2. Sources of fine particulate species in ambient air over Lake Champlain Basin, VT

    SciTech Connect

    Ning Gao; Amy E. Gildemeister; Kira Krumhansl; Katherine Lafferty; Philip K. Hopke; Eugene Kim; Richard L. Poirot

    2006-11-15

    This study is a part of an ongoing investigation of the types and locations of emission sources that contribute fine particulate air contaminants to Underhill, VT. The air quality monitoring data used for this study are from the Interagency Monitoring of Protected Visual Environments network for the period of 2001-2003 for the Underhill site. The main source-receptor modeling techniques used are the positive matrix factorization (PMF) and potential source contribution function (PSCF). This new study is intended as a comparison to a previous study of the 1988-1995 Underhill data that successfully revealed a total of 11 types of emission sources with significant contributions to this rural site. This new study has identified a total of nine sources: nitrate-rich secondary aerosol, wood smoke, East Coast oil combustion, automobile emission, metal working, soil/dust, sulfur-rich aerosol type I, sulfur-rich aerosol type II, and sea salt/road salt. Furthermore, the mass contributions from the PMF identified sources that correspond with sampling days with either good or poor visibility were analyzed to seek possible correlations. It has been shown that sulfur-rich aerosol type I, nitrate aerosol, and automobile emission are the most important contributors to visibility degradation. Soil/dust and sea salt/road salt also have an added effect. 38 refs., 17 figs., 2 tabs.

  3. Method and apparatus for capacitive deionization, electrochemical purification, and regeneration of electrodes

    DOEpatents

    Farmer, J.

    1995-06-20

    An electrochemical cell for capacitive deionization and electrochemical purification and regeneration of electrodes includes two oppositely disposed, spaced-apart end plates, one at each end of the cell. Two generally identical single-sided end electrodes, are arranged one at each end of the cell, adjacent to the end plates. An insulator layer is interposed between each end plate and the adjacent end electrode. Each end electrode includes a single sheet of conductive material having a high specific surface area and sorption capacity. In the preferred embodiment, the sheet of conductive material is formed of carbon aerogel composite. The cell further includes a plurality of generally identical double-sided intermediate electrodes that are equidistantly separated from each other, between the two end electrodes. As the electrolyte enters the cell, it flows through a continuous open serpentine channel defined by the electrodes, substantially parallel to the surfaces of the electrodes. By polarizing the cell, ions are removed from the electrolyte and are held in the electric double layers formed at the carbon aerogel surfaces of the electrodes. As the cell is saturated with the removed ions, the cell is regenerated electrically, thus significantly minimizing secondary wastes. 17 figs.

  4. Positron emission tomography (PET) analysis of the effects of auditory stimulation on the distribution of /sup 11/C-N-methylchlorphentermine in the brain

    SciTech Connect

    Paschal, C.B.

    1986-06-01

    This experimental work was launched to study how auditory stimulation effects blood flow in the brain. The technique used was Positron Emission Tomography (PET) with /sup 11/C-N-methylchlorphentermine (/sup 11/C-NMCP) as the tracer. /sup 11/C-NMCP acts as a molecular microsphere and thus measures blood flow. The objectives of this work were: to develop, test, and refine an experimental procedure, to design and construct a universally applicable positioning device, and to develop and test a synthesis for a radiopure solution of /sup 11/C-NMCP; all were accomplished. PET was used to observe the brain distribution of /sup 11/C-NMCP during binaural and monaural stimulation states. The data was analyzed by finding the signal intensity in regions of the image that represented the left and right interior colliculi (IC's), brain structures dedicated to the processing of auditory signals. The binaural tests indicated a statistically significant tendency for slightly higher concentration of the tracer in the left IC than in the right IC. The monaural tests combined with those of the binaural state were not solidly conclusive, however, three of the four cases showed a decrease in tracer uptake in the IC opposite the zero-stimulus ear, as expected. There is some indication that the anesthesia used in the majority of this work may have interferred with blood flow response to auditory stimulation. 39 refs., 17 figs., 3 tabs.

  5. Non-intrusive method of measuring PCV blowby constituents

    SciTech Connect

    Crane, M.E.; Ariga, S.; Boulard, R.; Lindamood, B.

    1994-10-01

    A technique is presented that has been successfully demonstrated to non-intrusively and quickly sample gases typically found in PCV systems. Color Detection Tubes (CDTs) were used with a simple sampling arrangement to monitor CO{sub 2}, NO{sub x}, O{sub 2}, and H{sub 2}O(g) at the closure line, crankcase, and PCV line. Measurements were accurate and could be made instantaneously. Short Path Thermal Desorbtion Tubes (SPTDTs) were used at the same engine locations for the characterization of fuel- and oil-derived hydrocarbon (HC) fractions and required only 50 cc samples. High engine loads caused pushover of blowby vapors as indicated by increased concentrations of CO{sub 2}, NO{sub x}, H{sub 2}O(g), and fuel HCs in the engines` fresh air inlets during WOT operation. Peak concentrations of blowby vapors were measured in the crankcase under no load and part throttle conditions. Oxygen concentrations always opposed the trends of CO{sub 2}, NO{sub x}, and H{sub 2}O(g). SPTDT data revealed that the PCV system consumes approximately 100-200 times more fuel vapors than oil vapors, on a mass basis; however, PCV-derived oil consumption represented almost 12 percent of total engine oil consumption under no load conditions. 8 refs., 17 figs.

  6. Estimating commercial truck VMT (vehicle miles of travel) of interstate motor carriers: Data evaluation

    SciTech Connect

    Hu, P.S.; Wright, T.; Miaou, Shaw-Pin; Beal, D.J.; Davis, S.C.; Tennessee Univ., Knoxville, TN )

    1989-11-01

    This memorandum summarizes the evaluation results of six data sources in terms of their ability to estimate the number of commercial trucks operating in interstate commerce and their vehicle miles of travel (VMT) by carrier type and by state. The six data sources are: (1) Truck Inventory and Use Survey (TIUS) from the Bureau of the Census, (2) nationwide truck activity and commodity survey (NTACS) from the Bureau of the Census, (3) National Truck Trip Information Survey (NTTIS) from the University of Michigan Transportation Research Institute (UMTRI), (4) highway performance monitoring system (HPMS) from the Federal Highway Administration (FHWA), Department of Transportation, (5) state fuel tax reports from each individual state and the international fuel tax agreement (IFTA), and (6) International Registration Plan (IRP) of the American Association of Motor Vehicle Administrators (AAMVA). TIUS, NTACS, and NTTIS are designed to provide data on the physical and operational characteristics of the Nation's truck population (or sub-population); HPMS is implemented to collect information on the physical and usage characteristics of various highway systems; and state fuel tax reports and IRP are tax-oriented registrations. 16 figs., 13 tabs.

  7. Technology Base Research Project for electrochemical energy storage

    SciTech Connect

    Kinoshita, Kim

    1991-06-01

    The US DOE's Office of Propulsion Systems provides support for an electrochemical energy storage program, which includes R D on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs). The program centers on advanced systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The general R D areas addressed by the project include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the development of air-system (fuel cell, metal/air) technology for transportation applications. Major emphasis is given to applied research which will lead to superior performance and lower life-cycle costs. The TBR Project is divided into three major project elements: Exploratory Research, Applied Science Research, and Air Systems Research. Highlights of each project element are summarized according to the appropriate battery system or electrochemical research area. 16 figs., 4 tabs.

  8. Reactor protection system with automatic self-testing and diagnostic

    DOEpatents

    Gaubatz, D.C.

    1996-12-17

    A reactor protection system is disclosed having four divisions, with quad redundant sensors for each scram parameter providing input to four independent microprocessor-based electronic chassis. Each electronic chassis acquires the scram parameter data from its own sensor, digitizes the information, and then transmits the sensor reading to the other three electronic chassis via optical fibers. To increase system availability and reduce false scrams, the reactor protection system employs two levels of voting on a need for reactor scram. The electronic chassis perform software divisional data processing, vote 2/3 with spare based upon information from all four sensors, and send the divisional scram signals to the hardware logic panel, which performs a 2/4 division vote on whether or not to initiate a reactor scram. Each chassis makes a divisional scram decision based on data from all sensors. Automatic detection and discrimination against failed sensors allows the reactor protection system to automatically enter a known state when sensor failures occur. Cross communication of sensor readings allows comparison of four theoretically ``identical`` values. This permits identification of sensor errors such as drift or malfunction. A diagnostic request for service is issued for errant sensor data. Automated self test and diagnostic monitoring, sensor input through output relay logic, virtually eliminate the need for manual surveillance testing. This provides an ability for each division to cross-check all divisions and to sense failures of the hardware logic. 16 figs.

  9. Fault-tolerant reactor protection system

    DOEpatents

    Gaubatz, D.C.

    1997-04-15

    A reactor protection system is disclosed having four divisions, with quad redundant sensors for each scram parameter providing input to four independent microprocessor-based electronic chassis. Each electronic chassis acquires the scram parameter data from its own sensor, digitizes the information, and then transmits the sensor reading to the other three electronic chassis via optical fibers. To increase system availability and reduce false scrams, the reactor protection system employs two levels of voting on a need for reactor scram. The electronic chassis perform software divisional data processing, vote 2/3 with spare based upon information from all four sensors, and send the divisional scram signals to the hardware logic panel, which performs a 2/4 division vote on whether or not to initiate a reactor scram. Each chassis makes a divisional scram decision based on data from all sensors. Each division performs independently of the others (asynchronous operation). All communications between the divisions are asynchronous. Each chassis substitutes its own spare sensor reading in the 2/3 vote if a sensor reading from one of the other chassis is faulty or missing. Therefore the presence of at least two valid sensor readings in excess of a set point is required before terminating the output to the hardware logic of a scram inhibition signal even when one of the four sensors is faulty or when one of the divisions is out of service. 16 figs.

  10. Petroleum supply monthly, June 1998 with data for April 1998

    SciTech Connect

    1998-06-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  11. Methods for forming thin-film heterojunction solar cells from I-III-VI{sub 2}

    DOEpatents

    Mickelsen, R.A.; Chen, W.S.

    1985-08-13

    An improved thin-film, large area solar cell, and methods for forming the same are disclosed, having a relatively high light-to-electrical energy conversion efficiency and characterized in that the cell comprises a p-n type heterojunction formed of: (i) a first semiconductor layer comprising a photovoltaic active material selected from the class of I-III-VI{sub 2} chalcopyrite ternary materials which is vacuum deposited in a thin ``composition-graded`` layer ranging from on the order of about 2.5 microns to about 5.0 microns ({approx_equal}2.5 {mu}m to {approx_equal}5.0 {mu}m) and wherein the lower region of the photovoltaic active material preferably comprises a low resistivity region of p-type semiconductor material having a superimposed region of relatively high resistivity, transient n-type semiconductor material defining a transient p-n homojunction; and (ii) a second semiconductor layer comprising a low resistivity n-type semiconductor material; wherein interdiffusion occurs (a) between the elemental constituents of the two discrete juxtaposed regions of the first semiconductor layer defining a transient p-n homojunction layer, and (b) between the transient n-type material in the first semiconductor layer and the second n-type semiconductor layer. 16 figs.

  12. Continuum regularization of quantum field theory

    SciTech Connect

    Bern, Z.

    1986-04-01

    Possible nonperturbative continuum regularization schemes for quantum field theory are discussed which are based upon the Langevin equation of Parisi and Wu. Breit, Gupta and Zaks made the first proposal for new gauge invariant nonperturbative regularization. The scheme is based on smearing in the ''fifth-time'' of the Langevin equation. An analysis of their stochastic regularization scheme for the case of scalar electrodynamics with the standard covariant gauge fixing is given. Their scheme is shown to preserve the masslessness of the photon and the tensor structure of the photon vacuum polarization at the one-loop level. Although stochastic regularization is viable in one-loop electrodynamics, two difficulties arise which, in general, ruins the scheme. One problem is that the superficial quadratic divergences force a bottomless action for the noise. Another difficulty is that stochastic regularization by fifth-time smearing is incompatible with Zwanziger's gauge fixing, which is the only known nonperturbaive covariant gauge fixing for nonabelian gauge theories. Finally, a successful covariant derivative scheme is discussed which avoids the difficulties encountered with the earlier stochastic regularization by fifth-time smearing. For QCD the regularized formulation is manifestly Lorentz invariant, gauge invariant, ghost free and finite to all orders. A vanishing gluon mass is explicitly verified at one loop. The method is designed to respect relevant symmetries, and is expected to provide suitable regularization for any theory of interest. Hopefully, the scheme will lend itself to nonperturbative analysis. 44 refs., 16 figs.

  13. Wildlife Impact Assessment Palisades Project, Idaho, Final Report.

    SciTech Connect

    Sather-Blair, Signe

    1985-02-01

    The Habitat Evaluation Procedures were used to evaluate pre- and post-construction habitat conditions of the US Bureau of Reclamation's Palisades Project in eastern Idaho. Eight evaluation species were selected with losses expressed in the number of Habitat Units (HU's). One HU is equivalent to one acre of prime habitat. The evaluation estimated that a loss of 2454 HU's of mule deer habitat, 2276 HU's of mink habitat, 2622 HU's of mallard habitat, 805 HU's of Canada goose habitat, 2331 HU's of ruffed grouse habitat, 5941 and 18,565 HU's for breeding and wintering bald eagles, and 1336 and 704 HU's for forested and scrub-shrub wetland nongame species occurred as a result of the project. The study area currently has 29 active osprey nests located around the reservoir and the mudflats probably provide more feeding habitat for migratory shore birds and waterfowl than was previously available along the river. A comparison of flow conditions on the South Fork of the Snake River below the dam between pre- and post-construction periods also could not substantiate claims that water releases from the dam were causing more Canada goose nest losses than flow in the river prior to construction. 41 refs., 16 figs., 9 tabs.

  14. Test Plan: WIPP bin-scale CH TRU waste tests

    SciTech Connect

    Molecke, M.A.

    1990-08-01

    This WIPP Bin-Scale CH TRU Waste Test program described herein will provide relevant composition and kinetic rate data on gas generation and consumption resulting from TRU waste degradation, as impacted by synergistic interactions due to multiple degradation modes, waste form preparation, long-term repository environmental effects, engineered barrier materials, and, possibly, engineered modifications to be developed. Similar data on waste-brine leachate compositions and potentially hazardous volatile organic compounds released by the wastes will also be provided. The quantitative data output from these tests and associated technical expertise are required by the WIPP Performance Assessment (PA) program studies, and for the scientific benefit of the overall WIPP project. This Test Plan describes the necessary scientific and technical aspects, justifications, and rational for successfully initiating and conducting the WIPP Bin-Scale CH TRU Waste Test program. This Test Plan is the controlling scientific design definition and overall requirements document for this WIPP in situ test, as defined by Sandia National Laboratories (SNL), scientific advisor to the US Department of Energy, WIPP Project Office (DOE/WPO). 55 refs., 16 figs., 19 tabs.

  15. Stratabound geothermal resources in North Dakota and South Dakota

    SciTech Connect

    Gosnold, W.D. Jr.

    1991-08-01

    Analysis of all geothermal aquifers in North Dakota and South Dakota indicates an accessible resource base of approximately 21.25 exajoules (10{sup 18} J = 1 exajoule, 10{sup 18} J{approximately}10{sup 15} Btu=1 quad) in North Dakota and approximately 12.25 exajoules in South Dakota. Resource temperatures range from 40{degree}C at depths of about 700 m to 150{degree}C at 4500 m. This resource assessment increases the identified accessible resource base by 31% over the previous assessments. These results imply that the total stratabound geothermal resource in conduction-dominated systems in the United States is two-to-three times greater than some current estimates. The large increase in the identified accessible resource base is primarily due to inclusion of all potential geothermal aquifers in the resource assessment and secondarily due to the expanded data base compiled in this study. These factors were interdependent in that the extensive data base provided the means for inclusion of all potential geothermal aquifers in the analysis. Previous assessments included only well-known aquifer systems and were limited by the amount of available data. 40 refs., 16 figs., 8 tabs.

  16. Systems for controlling the intensity variations in a laser beam and for frequency conversion thereof

    DOEpatents

    Skupsky, S.; Craxton, R.S.; Soures, J.

    1990-10-02

    In order to control the intensity of a laser beam so that its intensity varies uniformly and provides uniform illumination of a target, such as a laser fusion target, a broad bandwidth laser pulse is spectrally dispersed spatially so that the frequency components thereof are spread apart. A disperser (grating) provides an output beam which varies spatially in wavelength in at least one direction transverse to the direction of propagation of the beam. Temporal spread (time delay) across the beam is corrected by using a phase delay device (a time delay compensation echelon). The dispersed beam may be amplified with laser amplifiers and frequency converted (doubled, tripled or quadrupled in frequency) with nonlinear optical elements (birefringent crystals). The spectral variation across the beam is compensated by varying the angle of incidence on one of the crystals with respect to the crystal optical axis utilizing a lens which diverges the beam. Another lens after the frequency converter may be used to recollimate the beam. The frequency converted beam is recombined so that portions of different frequency interfere and, unlike interference between waves of the same wavelength, there results an intensity pattern with rapid temporal oscillations which average out rapidly in time thereby producing uniform illumination on target. A distributed phase plate (also known as a random phase mask), through which the spectrally dispersed beam is passed and then focused on a target, is used to provide the interference pattern which becomes nearly modulation free and uniform in intensity in the direction of the spectral variation. 16 figs.

  17. Energy transfer in reactive and non-reactive H/sub 2/ + OH collisions

    SciTech Connect

    Rashed, O.; Brown, N.J.

    1985-04-01

    We have used the methods of quasi-classical dynamics to compute energy transfer properties of non-reactive and reactive H/sub 2/ + OH collisions. Energy transfer has been investigated as function of translational temperature, reagent rotational energy, and reagent vibrational energy. The energy transfer mechanism is complex with ten types of energy transfer possible, and evidence was found for all types. There is much more exchange between the translational degree of freedom and the H/sub 2/ vibrational degree of freedom than there is between translation and OH vibration. Translational energy is transferred to the rotational degrees of freedom of each molecule. There is a greater propensity for the transfer of translation to OH rotation than H/sub 2/ rotation. In reactive collisions, increases in reagent translational temperature predominantly appear as vibrational energy in the water molecule. Energy transfer in non-reactive and reactive collisions does not depend strongly on the initial angular momentum in either molecule. In non-reactive collisions, vibrational energy is transferred to translation, to the rotational degree of freedom of the same molecule, and to the rotational and vibrational degrees of freedom of the other molecule. In reactive collisions, the major effect of increasing the vibrational energy in reagent molecules is that, on the average, the vibrational energy of the reagents appears as product vibrational energy. 18 refs., 16 figs., 6 tabs.

  18. Windows and lighting program

    SciTech Connect

    Not Available

    1990-06-01

    More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

  19. Influence of high-strain rate and temperature on the mechanical behavior of Nl-, Fe-, and Ti- based aluminides

    SciTech Connect

    Gray, G.T. III

    1996-09-01

    The majority of the strength characterization studies on ordered intermetallics have concentrated on the assessment of strength and work-hardening at conventional strain rates. Although the influence of strain rate on the structure/property relationships of pure nickel, iron, and titanium and a variety of their alloys have been extensively studied, the effect of strain rate on the stress-strain response of Ni-, Fe-, and Ti-based aluminides remains poorly understood. Dynamic constitutive behavior is however relevant to high speed impact performance of these materials such as during foreign object damage in aerospace applications, high-rate forging, and localized deformation behavior during machining. The influence of strain rate, varied between 0.001 and 10{sup 4} s{sup -1}, and temperatures, between 77 & 800K, on the compressive mechanical behavior of Ni{sub 3}A1, NiAl, Fe{sub 3}Al, Fe-40Al-0.1B, Ti-24Al-11Nb, and Ti-48Al-2Cr-2Nb will be presented. In this paper the influence of strain rate on the anomalous temperature dependency of the flow stresses in these aluminides will be reviewed and compared between aluminides. The rate sensitivity and work hardening of each aluminide will be discussed as a function of strain rate and temperature and contrasted to each other and to the values typical for their respective disordered base metals. 66 refs., 16 figs., 2 tabs.

  20. An analysis of markets for small-scale, advanced coal-combustion technology in Spain, Italy, and Turkey

    SciTech Connect

    Placet, M.; Gerry, P.A.; Kenski, D.M.; Kern, D.M.; Nehring, J.L.; Szpunar, C.B.

    1989-09-01

    This report discusses the examination of potential overseas markets for using small-scale, US-developed, advanced coal-combustion technologies (ACTs). In previous work, member countries of the Organization for Economic Cooperation and Development (OECD) were rated on their potential for using ACTs through a comprehensive screening methodology. The three most promising OECD markets were found to be Spain, Italy, and Turkey. This report provides in-depth analyses of these three selected countries. First, it addresses changes in the European Community with particular reference to the 1992 restructuring and its potential effect on the energy situation in Europe, specifically in the three subject countries. It presents individual country studies that examine demographics, economics, building infrastructures, and energy-related factors. Potential niches for ACTs are explored for each country through regional analyses. Marketing channels, strategies, and the trading environments in each country are also discussed. The information gathered indicates that Turkey is a most promising market, Spain is a fairly promising market, and Italy appears to be a somewhat limited market for US ACTs. 76 refs., 16 figs., 14 tabs.

  1. Joint remodelling and the evolution of the human hand.

    PubMed Central

    Lewis, O J

    1977-01-01

    A funtional morphological study has been made of the joints of the primate hand, particular emphasis being placed upon the carpometacarpal and metacarpophalangeal joints. The presumptive evolutionary history of these joints has been charted by reference to a comparative series of mammals. It has been demonstrated that the human joints have been quite strikingly modified in a number of ways, and that these evolutionary changes may be logically correlated with the refined functional attributes of the human hand. The morphological background thus established has been applied in a preliminary study of the hand bones of various fossil hominids. Images Fig. 7 Fig. 8 Figs. 15 and 16 Figs. 17 and 18 Figs. 19 and 20 Fig. 21 Fig. 22 Fig. 23 Figs. 24 and 25 Figs. 26 and 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 Fig. 36 Fig. 37 Fig. 38 Fig. 39 Fig. 40 Fig. 41 Fig. 42 Fig. 43 Fig. 44 Fig. 45 PMID:402345

  2. Coke gasification: the influence and behavior of inherent catalytic mineral matter

    SciTech Connect

    Mihaela Grigore; Richard Sakurovs; David French; Veena Sahajwalla

    2009-04-15

    Gasification of coke contributes to its degradation in the blast furnace. In this study, the effect of gasification on the inherent catalytic minerals in cokes and their reciprocal influence on gasification are investigated. The catalytic mineral phases identified in the cokes used in this study were metallic iron, iron sulfides, and iron oxides. Metallic iron and pyrrhotite were rapidly oxidized during gasification to iron oxide. The catalysts had a strong influence on the apparent rates at the initial stages of reaction. As gasification proceeds, their effect on the reaction rate diminishes as a result of reducing the surface contact between catalyst and carbon matrix because of carbon consumption around the catalyst particles; with extended burnout the reactivity of the coke becomes increasingly dependent on surface area. The reaction rate in the initial stages was also influenced by the particle size of the catalytic minerals; for a given catalytic iron level, the cokes whose catalytic minerals were more finely dispersed had a higher apparent reaction rate than cokes containing larger catalytic particles. Iron, sodium, and potassium in the amorphous phase did not appear to affect the reaction rate. 40 refs., 16 figs., 6 tabs.

  3. Reflection asymmetric shapes in nuclei

    SciTech Connect

    Ahmad, I.; Carpenter, M.P.; Emling, H.; Holzmann, R.; Janssens, R.V.F.; Khoo, T.L.; Moore, E.F.; Morss, L.R.; Durell, J.L.; Fitzgerald, J.B.; Mowbary, A.S.; Hotchkiss, M.A.; Phillips, W.R.; Drigert, M.W.; Ye, D.; Benet, P.; Manchester Univ. . Dept. of Physics; EG and G Idaho, Inc., Idaho Falls, ID; Notre Dame Univ., IN; Purdue Univ., Lafayette, IN )

    1989-01-01

    Experimental data show that there is no even-even nucleus with a reflection asymmetric shape in its ground state. Maximum octupole- octupole correlations occur in nuclei in the mass 224 (N{approximately}134, Z{approximately}88) region. Parity doublets, which are the characteristic signature of octupole deformation, have been observed in several odd mass Ra, Ac and Pa nuclei. Intertwined negative and positive parity levels have been observed in several even-even Ra and Th nuclei above spin {approximately}8{Dirac h}. In both cases, the opposite parity states are connected by fast El transitions. In some medium-mass nuclei intertwined negative and positive parity levels have also been observed above spin {approximately}7{Dirac h}. The nuclei which exhibit octupole deformation in this mass region are {sup 144}Ba, {sup 146}Ba and {sub 146}Ce; {sup 142}Ba, {sup 148}Ce, {sup 150}Ce and {sup 142}Xe do not show these characteristics. No case of parity doublet has been observed in the mass 144 region. 32 refs., 16 figs., 1 tab.

  4. Dworshak Reservoir Investigations: Trout, Bass and Forage Species, 1988 Annual Report.

    SciTech Connect

    Statler, David P.

    1989-07-01

    For the period March 1988 through February 1989, an estimated 154,558 angler-hours were expended to catch 20,037 rainbow trout, 3,933 smallmouth bass, and 14 bull trout. Estimated catch of other species, including cutthroat trout, whitefish, suckers, and squawfish totalled 84. Subcatchable rainbow trout (135 to 185mm) caught and released by boat anglers comprised 53% (12,770) of the total catch. An estimated 88.6% of the smallmouth bass caught were under the minimum legal size limit of 305mm and were released. Estimated harvest of smallmouth bass was 450. The highest monthly catch rate documented for all species excluding kokanee was 1.81 fish per hour during October. Severe weather conditions during February reduced effort and no fish were documented in the creel. Cumulative catch rates through the survey period for rainbow trout and smallmouth bass were .13 and .02, respectively. The lowest monthly catch rates generally occurred when fishing pressure was the highest, with fishing effort targeting on kokanee during the May through July high use periods. The Arlee strain rainbow trout was somewhat more vulnerable to boat anglers than the Shasta strain during the early post-release period. 20 refs., 16 figs., 12 tabs.

  5. Compilation of data to estimate groundwater migration potential for constituents in active liquid discharges at the Hanford Site

    SciTech Connect

    Ames, L.L.; Serne, R.J.

    1991-03-01

    A preliminary characterization of the constituents present in the 33 liquid waste streams at the US Department of Energy's Hanford Site has been completed by Westinghouse Hanford Company. In addition, Westinghouse Hanford has summarized the soil characteristics based on drill logs collected at each site that receives these liquid wastes. Literature searches were conducted and available Hanford-specific data were tabulated and reviewed. General literature on organic chemicals present in the liquid waste streams was also reviewed. Using all of this information, Pacific Northwest Laboratory has developed a best estimate of the transport characteristics (water solubility and soil adsorption properties) for those radionuclides and inorganic and organic chemicals identified in the various waste streams. We assume that the potential for transport is qualified through the four geochemical parameters: solubility, distribution coefficient, persistence (radiogenic or biochemical half-life), and volatility. Summary tables of these parameters are presented for more than 50 inorganic and radioactive species and more than 50 organic compounds identified in the liquid waste streams. Brief descriptions of the chemical characteristics of Hanford sediments, solubility, and adsorption processes, and of how geochemical parameters are used to estimate migration in groundwater-sediment environments are also presented. Groundwater monitoring data are tabulated for wells neighboring the facilities that receive the liquid wastes. 91 refs., 16 figs., 23 tabs.

  6. Approximate treatment of a strong explosion and expansion in a near vacuum

    SciTech Connect

    Thornton, A.L.

    1991-07-01

    The hydrodynamic blast created by the initiation of a 1 kev X-ray source from an arc-induced ionized gas column, involves density and temperature ratios of such magnitude that the strong shock theory of propagation from continuum fluid mechanics does not apply. Because these simulations occurs in a near vacuum, the continuum equations of motion break down and become invalid during the expansion process as the wavefront density decreases. This report summarizes an approximate treatment of the hydrodynamics of a strong explosion followed by an expanding wavefront in a near vacuum. The analysis was performed in support of the Saturn program to assist the test engineers in the design of a shroud which is optimized to receive the maximum cold X-ray radiation through its aperture while minimizing the hydrodynamic damage to the rest specimens. The analytical treatment uses mass conversion and the assumption of a liner velocity profile to assess the dynamic behavior of the developing wavefront. This technique provides a first estimate of the gas motion and pressure pulse and indicates some general trends of the hydrodynamic phenomenon. 9 refs., 16 figs., 1 tab.

  7. Stratigraphy, petrology, and geochemistry of the Spurr Volcanic Complex, eastern Aleutian Arc, Alaska. [(Appendix for geothermal fluid chemistry)

    SciTech Connect

    Nye, C.J.

    1987-12-01

    The Spurr Volcanic Complex (SVC) is a calcalkaline, medium-K, sequence of andesites erupted over the last quarter of a million years by the easternmost currently active volcanic center in the Aleutian Arc. The ancestral Mt. Spurr was built mostly of andesites of uniform composition (58 to 60% SiO/sub 2/), although andesite production was episodically interrupted by the introduction of new batches of more mafic magma. Near the end of the Pleistocene the ancestral Mt. Spurr underwent Bezyianny-type avalanche caldera formation, resulting in the production of a volcanic debris avalanche with overlying ashflows. Immediately afterward, a large dome (the present Mt. Spurr) was emplaced in the caldera. Both the ashflows and dome are made of acid andesite more silicic than any analyzed lavas from the ancestral Mt. Spurr (60 to 63% SiO/sub 2/), yet contain olivine and amphibole xenocrysts derived from more mafic magma. The mafic magma (53 to 57% SiO/sub 2/) erupted during and after dome emplacement, forming proto-Crater Peak and Crater Peak. Hybrid pyroclastic flows and lavas were also produced. Proto-Crater Peak underwent glacial dissection prior to the formation of Crater Peak in approximately the same location. Appendices II through VIII contain a summary of mineral compositions; Appendix I contains geochemical data. Appendix IX by R.J. Motyka and C.J. Nye describes the chemistry of geothermal fluids. 78 refs., 16 figs., 3 tabs.

  8. A 180-MWe British Gas/Lurgi-based IGCC (integrated gasification combined-cycle) power plant: Feasibility study at Virginia Power and Detroit Edison: Final report

    SciTech Connect

    Booras, G.S.; Pietruszkiewicz, J.; Sibley, F.O.

    1988-09-01

    This study investigated the merits of combining the British Gas/Lurgi slagging gasifier (BGL gasifier) with an advanced gas turbine in a 180-MWe, commercial-scale IGCC power plant located at Virginia Power's Chesterfield station. The gasification plant was fed with run-of-mine Pittsburgh No. 8 coal (containing 60 percent fines) and sized to fully load one General Electric MS7001F gas turbine at 88/degree/F ambient temperature. Seventy-five percent of the total coal fines were pelletized by agglomeration prior to gasification. All recovered tars and oils were recycled to the gasifier, while the gas liquor (process wastewater) is completely incinerated. The results of the study indicate that the IGCC power plant has a very good heat rate on coal (8993 Btu/kWh at 59/degree/F and a moderate capital cost, i.e., total capital requirement, on coal ($1910/kW at 59/degree/F, with AFDC) for a commercial-scale plant in this size range. With distillate augmentation to the medium-Btu fuel gas at 59/degree/F, the capital cost drops to about $1770/kW (with AFDC). A sensitivity study compared the cost and performance of a similar IGCC power plant located at an alternate plant site owned by Detroit Edison. The capital cost for the Detroit Edison plant increased by about $200/kW, with a very slight improvement in heat rate. 16 figs., 59 tabs.

  9. Petroleum supply monthly, May 1996 with data from March 1996

    SciTech Connect

    1996-05-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  10. Petroleum supply monthly, December 1997 with data from October 1997

    SciTech Connect

    1997-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregates, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  11. Petroleum supply monthly, January 1997 with data for November 1996

    SciTech Connect

    1997-01-01

    Data presented in the Petroleum Supply Monthly describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  12. International safeguards: Accounting for nuclear materials

    SciTech Connect

    Fishbone, L.G.

    1988-09-28

    Nuclear safeguards applied by the International Atomic Energy Agency (IAEA) are one element of the non-proliferation regime'', the collection of measures whose aim is to forestall the spread of nuclear weapons to countries that do not already possess them. Safeguards verifications provide evidence that nuclear materials in peaceful use for nuclear-power production are properly accounted for. Though carried out in cooperation with nuclear facility operators, the verifications can provide assurance because they are designed with the capability to detect diversion, should it occur. Traditional safeguards verification measures conducted by inspectors of the IAEA include book auditing; counting and identifying containers of nuclear material; measuring nuclear material; photographic and video surveillance; and sealing. Novel approaches to achieve greater efficiency and effectiveness in safeguards verifications are under investigation as the number and complexity of nuclear facilities grow. These include the zone approach, which entails carrying out verifications for groups of facilities collectively, and randomization approach, which entails carrying out entire inspection visits some fraction of the time on a random basis. Both approaches show promise in particular situations, but, like traditional measures, must be tested to ensure their practical utility. These approaches are covered on this report. 15 refs., 16 figs., 3 tabs.

  13. Nozzle dam having a unitary plug

    DOEpatents

    Veronesi, L.; Wepfer, R.M.

    1992-12-15

    Apparatus for sealing the primary-side coolant flow nozzles of a nuclear steam generator is disclosed. The steam generator has relatively small diameter manway openings for providing access to the interior of the steam generator including the inside surface of each nozzle, the manway openings having a diameter substantially less than the inside diameter of each nozzle. The apparatus includes a bracket having an outside surface for matingly sealingly engaging the inside surface of the nozzle. The bracket also has a plurality of openings longitudinally therethrough and a plurality of slots transversely therein in communication with each opening. A plurality of unitary plugs sized to pass through the manway opening are matingly sealingly disposed in each opening of the bracket for sealingly plugging each opening. Each plug includes a plurality of arms operable to engage the slots of the bracket for connecting each plug to the bracket, so that the nozzle is sealed as the plugs seal the openings and are connected to the bracket. 16 figs.

  14. Synthesis of extremely large mesoporous activated carbon and its unique adsorption for giant molecules

    SciTech Connect

    Tamai, Hisashi; Kakii, Takuhiro; Hirota, Yoshifumi

    1996-02-01

    The steam invigoration of pitches (softening points 85 and 280{degrees}C) homogenized with 1-3 wt% of organo rare0earth metal complexes such as Ln(C{sub 5}H{sub 5}){sub 3} or Ln(acac) (Ln=Y, Yb) at 930{degrees}C provided activated carbons with an extremely high mesopore ration, >70%. The resulted activated carbon selectively adsorbs giant molecules such as Vitamin B{sub 12}, blue acid 90 dye, dextran, nystatin, and humic acid, reflecting their large mesopore volumes. To understand what kind of carbon skeleton in pitch is suited for generation of high mesopore ration, the steam invigoration of a series of condensed polynuclear aromatics (COPNA) resins prepared from naphthlene, anthracene, phenanthrene, pyrene, or perylene and p-xylene-{alpha},{alpha}{prime}-diol were conducted in the presence of rare-earth metal complexes. As a result, COPNA resins containing phenanthrene, perylene, and pyrene generated large mesopore volume. 35 refs., 16 figs., 11 tabs.

  15. Middlesex Sampling Plant environmental report for calendar year 1989, Middlesex, New Jersey

    SciTech Connect

    Not Available

    1990-05-01

    The environmental monitoring program, which began in 1980, was continued in 1989 at the former Middlesex Sampling Plant (MSP) site, located in the Borough of Middlesex, New Jersey. The MSP site is part of the Formerly Utilized Sites Remedial Action Program (FUSRAP), a Department of Energy (DOE) program to decontaminate or otherwise control sites where residual radioactive materials remain either from the early years of the nation's atomic energy program or from commercial operations causing conditions that Congress has authorized DOE to remedy. The monitoring program at MSP measures radon concentrations in air; external gamma radiation levels; and uranium and radium concentrations in surface water, groundwater, and sediment. Additionally, several nonradiological parameters are measured in groundwater samples. To verify that the site is in compliance with the DOE radiation protection standard (100 mrem/yr) and to assess its potential effect on public health, the radiation dose was calculated for a hypothetical maximally exposed individual. This report presents the findings of the environmental monitoring program conducted in the area of the Middlesex Sampling Plant (MSP) site during calendar year 1989. 17 refs., 16 figs., 16 tabs.

  16. Seasonal Thermal Energy Storage Program: Progress summary for the period April 1986 through March 1988

    SciTech Connect

    Kannberg, L.D.

    1988-10-01

    This report discusses recent progress in the DOE program, directed by Pacific Northwest Laboratory, to develop seasonal thermal energy storage (STES). STES has been identified as one method to substantially improve energy efficiency and economics in certain sectors of our economy. It provides a potentially economic means of using waste heat and climatic energy resources to meet a significant portion of our growing energy need for building and industrial process heating and cooling. Environmental benefits accompany the use of STES in many applications. Furthermore, STES can contribute to reduced reliance on premium fuels that are often obtained from foreign sources. Lastly by improving the energy economics of industry, STES can contribute to improved US industrial competitiveness. The report is provided in four sections; the first being this introduction Section 2 of the report describes the program and briefly documents its organization, goals, history, and long-term plans. Section 3 describes the progress during the period from April, 1986, through March, 1988. Section 4 provides a short update on international development of STES. 17 refs., 16 figs., 7 tabs.

  17. Did high-altitude EMP (electromagnetic pulse) cause the Hawaiian streetlight incident

    SciTech Connect

    Vittitoe, C N

    1989-04-01

    Studies of electromagnetic pulse (EMP) effects on civilian and military systems predict results ranging from severe destruction to no damage. Convincing analyses that support either extreme are rare. The Hawaiian streetlight incident associated with the Starfish nuclear burst is the most widely quoted observed damage. We review the streetlight characteristics and estimate the coupling between the Starfish EMP and a particular streetlight circuit identified as one of the few that failed. Evidence indicates that the damage was EMP-generated. The main contributing factors were the azimuthal angle of the circuit relative to the direction of EMP propagation, and the rapid rise of the EMP signal. The azimuthal angle provided coherent buildup of voltage as the EMP swept across the transmission line. The rapid rise allowed substantial excitation before the canceling effects of ground reflections limited the signals. Resulting voltages were at the threshold for causing the observed fuse damage and are consistent with this damage occurring in only some of the strings in the systems. 15 refs., 16 figs., 4 tabs.

  18. Chemiresistor urea sensor

    DOEpatents

    Glass, R.S.

    1997-12-16

    A sensor is disclosed to detect and quantify urea in fluids resulting from hemodialysis procedures, and in blood and other body fluids. The sensor is based upon a chemiresistor, which consists of an interdigitated array of metal fingers between which a resistance measured. The interdigitated array is fabricated on a suitable substrate. The surface of the array of fingers is covered with a coating containing the enzyme urease which catalyzes the hydrolysis of urea to form the ammonium ion, the bicarbonate ion, and hydroxide-chemical products which provide the basis for the measured signal. In a typical application, the sensor could be used at bedside, in conjunction with an appropriate electronics/computer system, in order to determine the hemodialysis endpoint. Also, the chemiresistor used to detect urea, can be utilized with a reference chemiresistor which does not contain urease, and connected in a differential measurement arrangement, such that the reference chemiresistor would cancel out any fluctuations due to background effects. 16 figs.

  19. Fracture properties of a neutron-irradiated stainless steel submerged arc weld cladding overlay

    SciTech Connect

    Corwin, W.R.; Berggren, R.G.; Nanstad, R.K.

    1984-01-01

    The ability of stainless steel cladding to increase the resistance of an operating nuclear reactor pressure vessel to extension of surface flaws depends greatly on the properties of the irradiated cladding. Therefore, weld overlay cladding irradiated at temperatures and fluences relevant to power reactor operation was examined. The cladding was applied to a pressure vessel steel plate by the submerged arc, single-wire, oscillating-electrode method. Three layers of cladding provided a thickness adequate for fabrication of test specimens. The first layer was type 309, and the upper two layers were type 308 stainless steel. The type 309 was diluted considerably by excessive melting of the base plate. Specimens were taken from near the base plate-cladding interface and also from the upper layers. Charpy V-notch and tensile specimens were irradiated at 288/sup 0/C to a fluence of 2 x 10/sup 23/ neutrons/m/sup 2/ (>1 MeV). 10 refs., 16 figs., 4 tabs.

  20. Influence of chlorine on the decomposition of ethylene over iron and cobalt particles

    SciTech Connect

    Chambers, A,; Baker, R.T.K.

    1997-02-27

    The interaction of cobalt and iron powders with ethylene and ethylene/hydrogen mixtures containing trace concentrations of chlorine has been studied using a combination of flow reactor and transmission electron microscopy techniques. Detailed analysis of both the gaseous products and the amount of solid carbon (a filamentous form) deposited on the metal surfaces has permitted us to gain an insight into some of the factors surrounding the promotional effect of low concentrations of chlorine on the catalytic action of both cobalt and iron. The optimum carbon deposition activity was achieved when either of these metals was treated at 400{degree}C in an ethylene/hydrogen environment containing 75-100 ppm chlorine. If the halogen was removed from the reactant, then the high activity for carbon filament growth could not be sustained. Reintroduction of chlorine after a suitable period of time resulted in restoration of the carbon deposition activity to its original level, demonstrating the reversible nature of the `activation-deactivation` processes. The results of this study are rationalized according to the notion that the presence of adsorbed chlorine species is responsible for causing reconstruction of the metal surface; however, the possibility that the halogen is capable of inducing a perturbation in the electronic properties of the particles is also considered. 40 refs., 16 figs., 4 tabs.

  1. Induction accelerators and free-electron lasers at LLNL: Beam Research Program

    SciTech Connect

    Briggs, R.J.

    1989-02-15

    Linear induction accelerators have been developed to produce pulses of charged particles at voltages exceeding the capabilities of single-stage, diode-type accelerators and at currents too high rf accelerators. In principle, one can accelerate charged particles to arbitrarily high voltages using a multistage induction machine. The advent of magnetic pulse power systems makes sustained operation at high repetition rates practical, and high-average-power capability is very likely to open up many new applications of induction machines. In Part A of this paper, we survey the US induction linac technology, emphasizing electron machines. We also give a simplified description of how induction machines couple energy to the electron beam to illustrate many general issues that designers of high-brightness and high-average-power induction linacs must consider. We give an example of the application of induction accelerator technology to the relativistic klystron, a power source for high-gradient accelerators. In Part B we address the application of LIAs to free-electron lasers. The multikiloampere peak currents available from linear induction accelerators make high-gain, free-electron laser amplifier configurations feasible. High extraction efficiencies in a single mass of the electron beam are possible if the wiggler parameters are appropriately ''tapered'', as recently demonstrated at millimeter wavelengths on the 4-MeV ELF facility. Key issues involved in extending the technology to shorter wavelengths and higher average powers are described. Current FEL experiments at LLNL are discussed. 5 refs., 16 figs.

  2. Structure and rheology studies of poly(oxyethylene-oxypropylene-oxyethylene) aqueous solution

    SciTech Connect

    Prud`homme, R.K.; Wu, G.; Schneider, D.K.

    1996-10-02

    Small-angle neutron scattering (SANS) and rheometry were used to investigate the supramolecular structure formed by a ploy(oxyethylene-oxypropylene-oxyethylene)(PEO{sub 100}PPO{sub 65 }PEO{sub 100}, Pluronic F127) copolymer in aqueous solution over a temperature range of 10-75 {degree}C and a concentration range of 10-20 wt%. At copolymer concentrations of less than 12.5% the solutions are Newtonian fluids. Gels with an ordered structure (cubic packing of spherical micelles) are observed over a well-defined temperature window when the copolymer concentrations are greater than 17 wt%. The SANS results show that the aggregation number of the micelles is independent of temperature and concentrations. Low-yield stresses, very high zero shear viscosities (nearly 10{sup 6} P), and shear thinning are the major rheological characteristics of the gels. Near, but outside, the gel phase boundary the solutions are non-Newtonian (shear thinning). However, SANS shows these solutions contain domains having the same structure as that in the gel phase. The temperature window for ordered structures and non-Newtonian behavior becomes wider with increasing copolymer concentration. The degree of overlap of the micellar shells increases with increasing copolymer concentration at a given temperature and reaches a maximum at nearly 40 {degree}C at a fixed polymer concentration. The yield stress is due to repulsive interactions of PEO chains in the overlapped micellar shell. 36 refs., 16 figs., 2 tabs.

  3. Application of fractal geometry to the study of networks and fractures and their pressure transient

    SciTech Connect

    Acuna, J.A.; Yortsos, Y.C.

    1995-03-01

    Typical models for the representation of naturally fractured systems generally rely on the double-porosity Warren-Root model or on random arrays of fractures. However, field observations have demonstrated the existence of multiple length scales in a variety of naturally fractured media. Present models fail to capture this important property of self-similarity. We first use concepts from the theory of fragmentation and from fractal geometry to construct numerically a network of fractures that exhibits self-similar behavior over a range of scales. The method is a combination of fragmentation concepts and the iterated function system approach and allows for great flexibility in the development of patterns. Next, numerical simulation of unsteady single-phase flow in such networks is described. It is found that the pressure transient response of finite fractals behaves according to the analytical predictions of Change and Yortsos (1990) provided that there exists a power law in the mass-radius relationship around the test well location. Finite size effects can become significant and interfere with the identification of the fractal structure. The paper concludes by providing examples from actual well tests in fractured systems which are analyzed using fractal pressure transient theory. 31 refs., 16 figs.

  4. Use of field experimental studies to evaluate emergency response models

    SciTech Connect

    Gudiksen, P.H.; Lange, R.; Rodriguez, D.J.; Nasstrom, J.S.

    1985-07-16

    The three-dimensional diagnostic wind field model (MATHEW) and the particle-in-cell atmospheric transport and diffusion model (ADPIC) are used by the Atmospheric Release Advisory Capability to estimate the environmental consequences of accidental releases of radioactivity into the atmosphere. These models have undergone extensive evaluations against field experiments conducted in a variety of environmental settings ranging from relatively flat to very complex terrain areas. Simulations of tracer experiments conducted in a complex mountain valley setting revealed that 35 to 50% of the comparisons between calculated and measured tracer concentrations were within a factor of 5. This may be compared with a factor of 2 for 50% of the comparisons for relatively flat terrain. This degradation of results in complex terrain is due to a variety of factors such as the limited representativeness of measurements in complex terrain, the limited spatial resolution afforded by the models, and the turbulence parameterization based on sigma/sub theta/ measurements to evaluate the eddy diffusivities. Measurements of sigma/sub theta/ in complex terrain exceed those measured over flat terrain by a factor of 2 to 3 leading to eddy diffusivities that are unrealistically high. The results of model evaluations are very sensitive to the quality and the representativeness of the meteorological data. This is particularly true for measurements near the source. The capability of the models to simulate the dispersion of an instantaneously produced cloud of particulates was illustrated to be generally within a factor of 2 over flat terrain. 19 refs., 16 figs.

  5. Effect of different crop species and mixtures and storage methods on ethanol production. Final report

    SciTech Connect

    Houck, W.S.

    1986-08-01

    Corn, grain sorghum, wheat and barley were tested for ethanol production as pure species and in mixtures. Some compensatory responses were discovered such as foam reduction in barley feedstocks. Cull potatoes were also tested for ethanol production in their pure state and in combination with grain sorghum. Potato producers could derive additional income if cull potatoes could be profitably used in the production of ethanol. A potato and grain mixture may alleviate the necessity of adding additional grinding equipment to process fleshy high moisture material. It is noteworthy to point out that the hammer mill employed at NMSU Agricultural Science Center at Clovis had no problems in processing potatoes in their pure form. Ensiling storage for high moisture corn and sweet sorghum was tested to determine the effect on ethanol production. High moisture corn proved to be an acceptable feedstock for ethanol production. Because of significant deterioration of the ensiled sweet sorghum samples, further investigation into appropriate techniques to simulate silage on a small-scale is needed. 6 refs., 16 figs., 9 tabs.

  6. The role of SASSYS-1 in LMR (Liquid Metal Reactor) safety analysis

    SciTech Connect

    Dunn, F.E.; Wei, T.Y.C.

    1988-01-01

    The SASSYS-1 liquid metal reactor systems analysis computer code is currently being used as the principal tool for analysis of reactor plant transients in LMR development projects. These include the IFR and EBR-II Projects at Argonne National Laboratory, the FFTF project at Westinghouse-Hanford, the PRISM project at General Electric, the SAFR project at Rockwell International, and the LSPB project at EPRI. The SASSYS-1 code features a multiple-channel thermal-hydraulics core representation coupled with a point kinetics neutronics model with reactivity feedback, all combined with detailed one-dimensional thermal-hydraulic models of the primary and intermediate heat transport systems, including pipes, pumps, plena, valves, heat exchangers and steam generators. In addition, SASSYS-1 contains detailed models for active and passive shutdown and emergency heat rejection systems and a generalized plant control system model. With these models, SASSYS-1 provides the capability to analyze a wide range of transients, including normal operational transients, shutdown heat removal transients, and anticipated transients without scram events. 26 refs., 16 figs.

  7. Packaging review guide for reviewing safety analysis reports for packagings: Revision 1

    SciTech Connect

    Fisher, L.E.; Chou, C.K.; Lloyd, W.R.; Mount, M.E.; Nelson, T.A.; Schwartz, M.W.; Witte, M.C.

    1988-10-01

    The Department of Energy (DOE) has established procedures for obtaining certification of packagings used by DOE and its contractors for the transport of radioactive materials. The principal purpose of this document is to assure the quality and uniformity of PCS reviews and to present a well-defined base from which to evaluate proposed changes in the scope and requirements of reviews. The Packaging Review Guide (PRG) also sets forth solutions and approaches determined to be acceptable in the past in dealing with a specific safety issue or safety-related design area. These solutions and approaches are presented in this form so that reviewers can take consistent and well-understood positions as the same safety issues arise in future cases. An applicant submitting a SARP does not have to follow the solutions or approaches presented. It is also a purpose of the PRG to make information about DOE certification policy and procedures widely available to DOE field offices, DOE contractors, federal agencies, and interested members of the public. 77 refs., 16 figs., 15 tabs.

  8. Microcantilever sensor

    DOEpatents

    Thundat, T.G.; Wachter, E.A.

    1998-02-17

    An improved microcantilever sensor is fabricated with at least one microcantilever attached to a piezoelectric transducer. The microcantilever is partially surface treated with a compound selective substance having substantially exclusive affinity for a targeted compound in a monitored atmosphere. The microcantilever sensor is also provided with a frequency detection means and a bending detection means. The frequency detection means is capable of detecting changes in the resonance frequency of the vibrated microcantilever in the monitored atmosphere. The bending detection means is capable of detecting changes in the bending of the vibrated microcantilever in the monitored atmosphere coactively with the frequency detection means. The piezoelectric transducer is excited by an oscillator means which provides a signal driving the transducer at a resonance frequency inducing a predetermined order of resonance on the partially treated microcantilever. Upon insertion into a monitored atmosphere, molecules of the targeted chemical attach to the treated regions of the microcantilever resulting in a change in oscillating mass as well as a change in microcantilever spring constant thereby influencing the resonant frequency of the microcantilever oscillation. Furthermore, the molecular attachment of the target chemical to the treated regions induce areas of mechanical strain in the microcantilever consistent with the treated regions thereby influencing microcantilever bending. The rate at which the treated microcantilever accumulates the target chemical is a function of the target chemical concentration. Consequently, the extent of microcantilever oscillation frequency change and bending is related to the concentration of target chemical within the monitored atmosphere. 16 figs.

  9. Petroleum supply monthly, August 1998, with data for June 1998

    SciTech Connect

    1998-08-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 fig., 66 tabs.

  10. Petroleum supply monthly: July 1998, with data for May 1998

    SciTech Connect

    1998-07-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 56 tabs.

  11. Petroleum supply monthly: April 1996, with data from February 1996

    SciTech Connect

    1996-04-01

    Data presented in this report describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the report present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD districts, and 12 Refining Districts. A future article gives a summer 1996 gasoline assessment. 16 figs., 66 tabs.

  12. Petroleum supply monthly, June 1999, with data for April 1999

    SciTech Connect

    1999-06-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  13. Petroleum migration and mixing in the Potiguar basin, Brazil

    SciTech Connect

    Trindade, L.A.F.; Santos Neto, E.V. ); Brassell, S.C. )

    1992-12-01

    Regional studies of petroleum samples from both offshore and onshore reservoirs of the Potiguar basin, Brazil, reveal compositional differences, with discernible landward trends, attributable to oil mixing. These chemical discrepancies can be related to a combination of source rocks, maturity, and migration history. The source rocks are classified in two groups based on their geochemical and molecular characteristics: (1) Neocomian and Aptian lacustrine freshwater shales, and (2) Aptian marine evaporitic shales and marls. Both lie in an offshore structural low. The geochemically contrasting oils derived from these source beds migrated updip, constrained by a monoclinal structure, through Aptian carrier beds to thermally immature strata. Evaluation of compositional heterogeneities in the oils and an investigation of migration effects on their compositions reveal trends related to the amount of mixing which, in turn, reflects the timing of both oil generation and migration, and the direction of migration. The more migrated oils contain greater contributions from freshwater sources, whereas the less migrated oils display more pronounced contributions from the younger and shallower hypersaline source beds. Biomarker maturity parameters indicate that the most migrated oils are less mature, consistent with their early generation from the deeper lacustrine freshwater source beds and migration to fill the shallower reservoirs first. 16 figs., 2 tabs.

  14. Petroleum supply monthly, February 1999, with data for December 1998

    SciTech Connect

    1999-02-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  15. Petroleum supply annual 1996: Volume 1

    SciTech Connect

    1997-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1996 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Capacity; each with final annual data. The summary statistics section show 16 years of data depicting the balance between supply, disposition and ending stocks for various commodities including crude oil, motor gasoline, distillate fuel oil, residual fuel oil, jet fuel propane/propylene, and liquefied petroleum gases. The detailed statistics section provide 1996 detailed statistics on supply and disposition, refinery operations, imports and exports, stocks, and transportation of crude oil and petroleum products. The refinery capacity contain listings of refineries and associated crude oil distillation and downstream capacities by State, as of January 1, 1997, as well as summaries of corporate refinery capacities and refinery storage capacities. In addition, refinery receipts of crude oil by method of transportation for 1996 are provided. Also included are fuels consumed at refineries, and lists of shutdowns, sales, reactivations, and mergers during 1995 and 1996. 16 figs., 59 tabs.

  16. Petroleum supply monthly, July 1997 with data from May 1997

    SciTech Connect

    1997-07-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  17. Petroleum supply monthly, December 1995: With data for October 1995

    SciTech Connect

    1995-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. 16 figs., 6 tabs.

  18. Alkali metal vapor removal from pressurized fluidized-bed combustor flue gas. Annual report, October 1983-September 1984

    SciTech Connect

    Lee, S.H.D.; Henry, R.F.; Smith, S.D.; Teats, F.G.; Wilson, W.I.; Myles, K.M.

    1985-08-01

    Under the auspices of the US Department of Energy, this work supports a program to develop sorbents for the cleanup of alkali corrodents from the flue gas produced by pressurized fluidized-bed coal combustion (PFBC) so that the cleaned hot gas is able to power downstream gas turbines without causing corrosion. This effort for FY 1984 involved two parts. In the first part, a laboratory-scale pressurized test unit was used to measure the rate of alkali (Na + K) evolution from beds of activated bauxite and Emathlite at a bed temperature of 850/sup 0/C and a system pressure of 10 atm absolute in a gas stream closely simulating the actual PFBC flue gas. The evaluation of the measured rates showed that (1) a spent activated bauxite bed, regenerated by water leaching and replenished with a small amount of fresh activated bauxite, contributes significantly less alkali vapor to the flue gas than the currently accepted alkali tolerance (0.024 ppM) of an industrial gas turbine and (2) the Emathlite bed contributes more alkali vapor than the turbine tolerance limit if the bed is exposed to a flue gas for a space time greater than 0.5 seconds. In the second part, a laboratory-scale demonstration of a fixed granular-bed sorber for the control of alkali vapor from PFBC flue gas was initiated. A detailed engineering design of this sorber system is described, and initial test results are presented and discussed. 26 refs., 16 figs.; 14 tabs.

  19. Petrology and emplacement dynamics of the intrusive and extrusive rhyolites of Obsidian Dome Inyo Craters volcanic chain, eastern California

    SciTech Connect

    Vogel, T.A.; Schuraytz, B.C.; Eichelberger, J.C.; Stockman, H.W.; Westrich, H.R.; Younker, L.W.; Horkowitz, J.P.

    1989-01-01

    Drilling at Obsidian Dome has provided continuous core samples of the distal and proximal portions of Obsidian Dome, its conduit, and an associated feeder dike. Both the dome and conduit are chemically and mineralogically zoned and consist of a finely porphyritic, high-Ba, low-silica rhyolite occurring in the basal portion of the dome and margins of the conduit and a finely porphyritic, low-Ba, higher silica rhyolite in the upper portion of the dome and center of the conduit. The high-Ba rhyolite contains two distinct phenocrysts assemblages with two distinct compositions, and represents mingled magmas. The low-Ba rhyolite in the dome and conduit contains significantly fewer disequilibrium phenocrysts and is only slightly mingled. The dike, sampled at 600 m depth, as well as a related tephra fall from Obsidian Dome vent, are entirely low-Ba rhyolite that contain no evidence of magma mingling. End members of the mingled magma, calculated using two different methods, are a 63 percent silica end member, and a silicic end member identical in composition to the dike and tephra fall from Obsidian Dome vent. This silicic end member was the first magma emplaced in the dike, and comprised much or all of the first magma vented to the surface during formation of the Obsidian Dome vent when eruption rates were high. Magma mingling of mafic and rhyolite magmas occurred during formation of the conduit. 59 refs., 16 figs., 10 tabs.

  20. Experiments for IFR fuel criticality in ZPPR-21

    SciTech Connect

    Olsen, D N; Smith, D M; Grasseschi, G L; Goin, R W; Steinhauer, J A; Collins, P J; Carpenter, S G

    1991-01-01

    A series of six criticality benchmark cores was built in ZPPR-21 between June and September 1990 to provide data for validating criticality calculations for systems likely to arise in the IFR fuel processing operations. The assemblies were graphite reflected and had core compositions containing different mixtures of Pu/U/Zr fuel. No previous data existed for cores of this type. Analysis of the data was done, in full detail, with an automated input processor using the VIM Monte Carlo code and ENDF/B-V.2 data. Since the validated method of criticality calculations at ANL is the KENO code and data, a second set of calculations, using a simplified model in RZ geometry was made with both VIM and KENO. An RZ model is specified together with geometrical corrections from the VIM calculations. This enables simple calculations to be made and corrections applied within the statistical uncertainty limits. The full description of the experiments is provided to enable calculations to be made in detail with KENO or any other code. 13 refs., 16 figs., 13 tabs.

  1. The October 17, 1989, Loma Prieta Earthquake: Effects on selected power and industrial facilities

    SciTech Connect

    Swan, S.W.; Roche, T.R. ); Schiff, A.J. )

    1991-09-01

    The Loma Prieta Earthquake of Tuesday, October 17, 1989, was the most damaging seismic event in California since the great San Francisco Earthquake of 1906. The earthquake created Modified Mercalli Intensities (MMI) of 7 or 8 throughout the northern Monterey and southern San Francisco Bay areas. This heavily shaken region included over 5000 square kilometers, and an urban population of over 3 million. This region includes a wide variety of modern industry, ranging from conventional smokestack'' operations to electronics and information processing facilities. The area nearest the fault rupture contains some of the largest power generation and transmission stations operated by the regional utility -- Pacific Gas Electric (PG E). This report summarizes the latest study in a program of post-earthquake investigations sponsored by The Electric Power Research Institute (EPRI). The Loma Prieta Earthquake created the largest amount of potentially useful data of any EPRI study to date. Over two dozen electric power and industrial facilities were reviewed following the earthquake. The following sections provide an overview of some of the primary observations. 16 figs.

  2. Commercialization effort in support of electroslag-casting technology

    SciTech Connect

    Sikka, V.K.

    1993-06-01

    This report summarizes the results of an effort to revive interest in the electroslag casting (ESC) of components in the United States. The ESC process is an extension of a well established electroslag-remelting (ESR) process. Both processes use the electrode of a material that is continuously melted and cast in a water-cooled copper mold. For simple shapes, the mold can be movable, allowing the continuous casting of long lengths. In an effort to revive US industries` interest in ESC, the following approaches were taken: (1) US industries with prior experience in ESC or currently operating an ESR unit were contacted, followed up with telephone conversation, and/or sent copies of prior published reports on the topic, and, in some cases, personal visits were made; (2) with two companies, a potential interest in ESC was worked out by initially conducting ESR; and (3) to further strengthen the industrial interest, the newly developed iron-aluminide alloy, FA-129, was chosen as the material of choice for this study. The two industrial companies that worked with ORNL were Special Metals Corporation (New Hartford, New York) and Precision Rolled Products, Inc. (PRP) [Florham Park, New Jersey]. Even with its advantages, a survey of the industry indicated that ESC technology has a very limited chance of advancement in the United States. However, the processing of rounds and slabs by the ESR process is a well established commercial technology and will continue to expand. 16 figs, 3 tabs, 12 refs.

  3. Petroleum supply monthly, February 1998 with data from December 1997

    SciTech Connect

    1998-02-01

    The Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  4. Determination of laser-evaporated uranium dioxide by neutron activation analysis

    SciTech Connect

    Allred, R.

    1987-05-01

    Safety analyses of nuclear reactors require information about the loss of fuel which may occur at high temperatures. In this study, the surface of a uranium dioxide target was heated rapidly by a laser. The uranium surface was vaporized into a vacuum. The uranium bearing species condensed on a graphite disk placed in the pathway of the expanding uranium vapor. Scanning electron microscopy and X-ray analysis showed very little droplet ejection directly from the laser target surface. Neutron activation analysis was used to measure the amount of uranium deposited. The surface temperature was measured by a fast-response automatic optical pyrometer. The maximum surface temperature ranged from 2400 to 3700/sup 0/K. The Hertz-Langmuir formula, in conjunction with the measured surface temperature transient, was used to calculate the theoretical amount of uranium deposited. There was good agreement between theory and experiment above the melting point of 3120/sup 0/K. Below the melting point much more uranium was collected than was expected theoretically. This was attributed to oxidation of the surface. 29 refs., 16 figs., 7 tabs.

  5. Critical experiments analysis by ABBN-90 constant system

    SciTech Connect

    Tsiboulia, A.; Nikolaev, M.N.; Golubev, V.

    1997-06-01

    The ABBN-90 is a new version of the well-known Russian group-constant system ABBN. Included constants were calculated based on files of evaluated nuclear data from the BROND-2, ENDF/B-VI, and JENDL-3 libraries. The ABBN-90 is intended for the calculation of different types of nuclear reactors and radiation shielding. Calculations of criticality safety and reactivity accidents are also provided by using this constant set. Validation of the ABBN-90 set was made by using a computerized bank of evaluated critical experiments. This bank includes the results of experiments conducted in Russia and abroad of compact spherical assemblies with different reflectors, fast critical assemblies, and fuel/water-solution criticalities. This report presents the results of the calculational analysis of the whole collection of critical experiments. All calculations were produced with the ABBN-90 group-constant system. Revealed discrepancies between experimental and calculational results and their possible reasons are discussed. The codes and archives INDECS system is also described. This system includes three computerized banks: LEMEX, which consists of evaluated experiments and their calculational results; LSENS, which consists of sensitivity coefficients; and LUND, which consists of group-constant covariance matrices. The INDECS system permits us to estimate the accuracy of neutronics calculations. A discussion of the reliability of such estimations is finally presented. 16 figs.

  6. Image compression technique

    DOEpatents

    Fu, C.Y.; Petrich, L.I.

    1997-03-25

    An image is compressed by identifying edge pixels of the image; creating a filled edge array of pixels each of the pixels in the filled edge array which corresponds to an edge pixel having a value equal to the value of a pixel of the image array selected in response to the edge pixel, and each of the pixels in the filled edge array which does not correspond to an edge pixel having a value which is a weighted average of the values of surrounding pixels in the filled edge array which do correspond to edge pixels; and subtracting the filled edge array from the image array to create a difference array. The edge file and the difference array are then separately compressed and transmitted or stored. The original image is later reconstructed by creating a preliminary array in response to the received edge file, and adding the preliminary array to the received difference array. Filling is accomplished by solving Laplace`s equation using a multi-grid technique. Contour and difference file coding techniques also are described. The techniques can be used in a method for processing a plurality of images by selecting a respective compression approach for each image, compressing each of the images according to the compression approach selected, and transmitting each of the images as compressed, in correspondence with an indication of the approach selected for the image. 16 figs.

  7. Field, petrologic, and geochemical relations of the Grouse Canyon Member of the belted range tuff in the GTUF rock mechanics test area, U12g tunnel, Nevada Test Site

    SciTech Connect

    Connolly, J.R.; Keil, K.

    1985-08-01

    This report summarizes the results of petrochemical studies of welded Grouse Canyon Member tuff in the G-Tunnel Underground Rock Mechanics Facility (GTUF), carried out in support of thermomechanical testing. The Grouse Canyon Member in GTUF is divided into three partial-cooling units (A, B, and C from the base upward), separated by tuffaceous breccias that mark partial cooling breaks. Unit B is most suitable for in situ experiments due to the presence of a thick, densely welded, relatively homogeneous central zone. Unit A is not favorable due to thinness, lithologic variability and extensive zeolitization. Unit B is not favorable due to variable degree of welding, and irregular zones of clay alteration. The Grouse Canyon Member is a marginally peralkaline comendite tuff; whole-rock agpaitic indices are close to 1.0. Phenocrysts present include sodic sanidine (An{sub 4}Ab{sub 55}Or{sub 41}), quartz, and minor clinopyroxene, fayalitic olivine, biotite, and Fe/Ti oxides. Devitrification yields axiolitic and spherulitic sodic sanidine and quartz, granophyric quartz, and minor sodic pyroxene and amphibole. These assemblages are characteristic of iron-rich peralkaline silicic tuffs. This differs slightly from the Topopah Spring Member at Yucca Mountain, in which there are no olivine or pyroxene phenocrysts and no ferromagnesian devitrification phases. Zeolitization in Unit A and the underlying Tunnel Bed 5 has added CaO from, and released Na{sub 2}O to, groundwater under oxidizing conditions. 26 refs., 16 figs., 2 tabs.

  8. Vitrification technologies for Weldon Spring raffinate sludges and contaminated soils - Phase 2 Report: Screening of Alternatives

    SciTech Connect

    Koegler, S.S.; Nakaoka, R.K.; Farnsworth, R.K.; Bates, S.O.

    1989-11-01

    This report is intended to aid the Weldon Spring Project Management Contractor in screening two vitrification technologies developed by Pacific Northwest Laboratory (PNL) for the remediation of raffinate sludges and contaminated soils at the Weldon Spring site in St. Charles County, Missouri. A previous report (Koegler, Oma, and Perez 1988) described the joule-heated ceramic melter (JHCM) and in situ vitrification (ISV) processes and their applicability to remediation of the Weldon Spring site based on existing information and previous PNL experience with similar wastes. Subsequent treatability tests and product analysis were conducted by PNL to further evaluate the JHCM and ISV processes. The treatability tests involved laboratory and bench-scale tests with actual raffinate sludge and uncontaminated soil from the Weldon Spring site. The vitrified product from the JHCM and ISV treatability tests was analyzed for a wide range of characteristics, including durability (leach resistance), strength, and toxicity. Both the process performance test and product quality were used to assess the two PNL vitrification technologies to determine their effectiveness, implementability, and cost. 11 refs., 16 figs., 23 tabs.

  9. Petroleum supply monthly, February 1995, with data for December 1994

    SciTech Connect

    1995-02-27

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. 16 figs., 66 tabs.

  10. Helicon wave excitation to produce energetic electrons for manufacturing semiconductors

    DOEpatents

    Molvik, A.W.; Ellingboe, A.R.

    1998-10-20

    A helicon plasma source is controlled by varying the axial magnetic field or rf power controlling the formation of the helicon wave. An energetic electron current is carried on the wave when the magnetic field is 90 G; but there is minimal energetic electron current when the magnetic field is 100 G in one particular plasma source. Similar performance can be expected from other helicon sources by properly adjusting the magnetic field and power to the particular geometry. This control for adjusting the production of energetic electrons can be used in the semiconductor and thin-film manufacture process. By applying energetic electrons to the insulator layer, such as silicon oxide, etching ions are attracted to the insulator layer and bombard the insulator layer at higher energy than areas that have not accumulated the energetic electrons. Thus, silicon and metal layers, which can neutralize the energetic electron currents will etch at a slower or non-existent rate. This procedure is especially advantageous in the multilayer semiconductor manufacturing because trenches can be formed that are in the range of 0.18--0.35 mm or less. 16 figs.

  11. Models for pulmonary lethality and morbidity after irradiation from internal and external sources

    SciTech Connect

    Scott, B.R.; Filipy, R.E.; Hahn, E.F.

    1989-05-01

    This report provides a hazard-function model for estimating the risk of death from radiation pneumonitis and/or pulmonary fibrosis following a light-water nuclear power accident. A similar model is also provided for estimating the prevalence of respiratory functional morbidity among those that survive death from acute effects. Hazard-function models for lethality and for morbidity were constructed using the cumulative hazard estimator H, which is related to the risk estimator R through the equation R = 1-exp(-H). The estimator H can be calculated using information provided in the report. The method of calculation depends on the exposure scenario. In general, the total normalized dose X for lethality or for morbidity is calculated. For lethality, X = 1 corresponds to a median lethal dose (LD/sub 50/); for morbidity, X = 1 corresponds to a median effective dose (ED/sub 50/). H is related to X by the equation H = 1n(2)X/sup V/, where V depends on the type of radiation (or radiations) involved. Contributions to X can arise from each of two main modes of exposure: (1) brief exposure of the lung, at a relatively high dose rate, to mainly external gammas, followed by (2) chronic internal alpha, and/or beta, and/or gamma irradiation of the lung. Equations are provided for calculating the contributions to X from both modes of exposure. 73 refs., 16 figs., 2 tabs.

  12. Alternate modal combination methods in response spectrum analysis

    SciTech Connect

    Bezler, P.; Curreri, J.R.; Wang, Y.K.; Gupta, A.K. )

    1990-10-01

    In piping analyses using the response spectrum method Square Root of the Sum of the Squares (SRSS) with clustering between closely spaced modes is the combination procedure most commonly used to combine between the modal response components. This procedure is simple to apply and normally yields conservative estimates of the time history results. The purpose of this study is to investigate alternate methods to combine between the modal response components. These methods are mathematically based to properly account for the combination between rigid and flexible modal responses as well as closely spaced modes. The methods are those advanced by Gupta, Hadjian and Lindely-Yow to address rigid response modes and the Double Sum Combination (DSC) method and the Complete Quadratic Combination (CQC) method to account for closely spaced modes. A direct comparison between these methods as well as the SRSS procedure is made by using them to predict the response of six piping systems. The results provided by each method are compared to the corresponding time history estimates of results as well as to each other. The degree of conservatism associated with each method is characterized. 19 refs., 16 figs., 10 tabs.

  13. Air Quality Modeling of Emissions from Prescribed Burning : Final Report.

    SciTech Connect

    Shah, Jitendra J.; Ottmar, Robert D.

    1989-06-01

    Fuel moisture content, woody fuel and duff consumption, fire behavior, and smoke plumes were monitored on four prescribed burns located on the Oakridge Ranger District of the Willamette National Forest. The measured fuel moisture, fuel consumption, and fire behavior data were used to validate an Emissions Production Model (EPM) which predicts fuel consumption, heat release rates, and smoke emissions for a smoke dispersion model called Simple Approach Smoke Estimation Model (SASEM). Both EPM and SASEM have been combined together into a single program called Tiered Smoke Air Resource System (TSARS). Several comparisons were made between predicted results from EPM and measured values to help determine the level of accuracy which could be expected for different levels of data input effort. In-plume sampling procedures using tethered equipment for sampling of particulate matter and gaseous pollutants were designed, developed, and acquired during this study. Because the objective of this study was to evaluate the model under the July 1 to Labor Day burning ban meteorological conditions, sampling was scheduled only for the summer months. For each study year, a meteorological pattern occurred that severely limited sampling. The summers for all three study years in general were extremely dry; prohibiting burning due to fire danger. Therefore, a smaller number of units were burned than that planned. 29 refs., 16 figs., 19 tabs.

  14. X-ray and charged particle detection with CsI(Tl) layer coupled to a-Si:H photodiode layers

    SciTech Connect

    Fujieda, I.; Cho, G.; Drewery, J.; Gee, T.; Jing, T.; Kaplan, S.N.; Perez-Mendez, V.; Wildermuth, D. ); Street, R.A. )

    1990-10-01

    A compact real-time X-ray and charged particle imager with digitized position output can built either by coupling a fast scintillator to a photodiode array or by forming one on a photodiode array directly. CsI(Tl) layers 100--1000{mu}m thick were evaporated on glass substrates from a crystal CsI(Tl). When coupled to a crystalline Si or amorphous silicon (a-Si:H) photodiode and exposed to calibrated X-ray pulses, their light yields and speed were found to be comparable to those of a crystal CsI(Tl). Single {beta} particle detection was demonstrated with this combination. The light spread inside evaporated CsI(Tl) was suppressed by its columnar structure. Scintillation detection gives much larger signals than direct X-ray detection due to the increased energy deposition in the detector material. Fabrication of monolithic type X-ray sensors consisting of CsI + a-Si:H photodiodes is discussed. 20 refs., 16 figs.

  15. Mechanical property mapping of the ductile cast iron MOSAIK KfK cask

    SciTech Connect

    Salzbrenner, R.; Crenshaw, T.B.

    1990-08-01

    The mechanical properties of a coring from the bottom of the MOSAIK KfK cask were determined as a function of through wall position for the 21 cm thick section. The elastic moduli were determined from ultrasonic velocity measurements. The standard tensile properties were determined as a function of strain rate at {minus}29{degree}C. The Charpy impact behavior was measured as a function of temperature from {minus}100 to {plus}100{degree}C. The fracture toughness was determined for both static and elevated loading rates (at {minus}29{degree}C). In addition to these mechanical properties, the variation in microstructure and composition with position in the coring is reported. The mechanical properties provide the essential information for the stress analysis modeling of the behavior of the cask during a drop test which will be conducted to simulate a very severe accident condition. The results from the elevated loading rate fracture toughness tests are used to suggest the severity of the flaws that should be introduced into the cask for the sequential series of drops which are scheduled to begin in March 1990. 24 refs., 16 figs., 6 tabs.

  16. Literature review and ethnohistory of Native American occupancy and use of the Yucca Mountain Region; Yucca Mountain Project, Interim report

    SciTech Connect

    Stoffle, R.W.; Olmsted, J.E.; Evans, M.J.

    1990-01-01

    This report presents a review of the literature concerning Native American occupancy and use of the Yucca Mountain area and vicinity. It draws on a wide range of material, including early traveler reports, government documents, ethnographic and historical works, and local newspapers. The report complements two other concurrent studies, one focused on the cultural resources of Native American people in the study area and the other an ethnobotanical study of plant resources used by Native American people in the study area. The literature review has had two principal purposes: to determine the completeness of the Yucca Mountain Native American study design and to contribute to the understanding of the presence of Native American people in the Yucca Mountain area. A review of the existing literature about the Yucca Mountain area and southern Nye County, supplemented by the broader literature about the Great Basin, has verified three aspects of the study design. First, the review has aided in assessing the completeness of the list of Native American ethnic groups that have traditional or historical ties to the site. Second, it has aided in the production of a chronology of Native American activities that occurred on or near the site during the late nineteenth and early twentieth centuries. Third, it has helped to identify the location of cultural resources, including burials and other archaeological sites, in the study area and vicinity. 200 refs., 16 figs., 6 tabs.

  17. Alloy and coating development for coal gasification applications

    SciTech Connect

    Natesan, K.

    1987-09-01

    Over the years, three major avenues have been followed to improve the sulfur resistance of metallic materials. The first approach involves modification of bulk alloy composition such as increases in chromium and/or aluminum content; additions of refractory metals such as Zr, Nb, and Ti; and additions of microalloy constituents including rare earth elements. The second approach involves modification of the surface region of engineering alloys via procedures such as ion implantation, sputtering of selected elements accompanied by ion beam mixing, etc. This approach can create a nonequilibrium alloy chemistry and microstructures that can impede the transport of reactants from the gas phase and cations from the alloy substrate. The third method involves coating of alloy surfaces with corrosion-resistant materials via techniques such as pack cementation, low-pressure plasma spray, and electrospark deposition. This approach generally results in chemical/metallurgical bonding between the deposit and the substrate alloy. The present paper discusses several of these approaches and provides corrosion rate and scale morphological information obtained at Argonne National Laboratory. 21 refs., 16 figs., 3 tabs.

  18. Upper Devonian-Tournaisian facies and oil resources of the Russian craton's eastern margin

    SciTech Connect

    Ulmishek, G.F.

    1987-01-01

    Upper Devonian-Tournaisian facies on the Russian craton's eastern margin indicate deposition in two distinct paleomorphic environments: bathimetrically expressed basins and shallow platforms. Shallow-water carbonate sedimentation persisted on the platforms, and black, thin-bedded, organic-rich shales and limestones of the Domanik facies were deposited in stagnant basins that stretched more than 2000 km from the Arctic Ocean to the Caspian Sea. Intermittently introduced clastic material and detrital carbonates formed progradational shelves. Barrier reefs along platform edges, atolls and reef mounds on basin margins, and smaller patch reefs on platforms were abundant. The basins were finally filled with Tournaisian (in the Timan-Pechora province) or basal Visean (in the Volga-Ural province) clastics. The North Caspian deep-water basin survived until the end of Early Permian time when it was filled with a thick salt formation. The organic-rich Domanik facies is the major source rock in the Volga-Ural, Timam-Pechora, and North Caspian petroleum provinces. About one-third of oil reserves occurs predominantly in structural traps in Middle Devonian-lower Frasnian clastics that directly underlie Domanik rocks. Most of the remaining two-thirds is found in reefs, especially in drape structures over the reefs in Tournaisian carbonates and basal Visean clastics. 61 refs., 16 figs.

  19. Thermochemical stability diagrams for condensed phases and tabulation of volatile species over condensed phases for thirteen metal-oxygen-silicon systems at 1000 and 1250 K: Volume 2: Final report

    SciTech Connect

    Gulbransen, E.A.; Meier, G.H.

    1989-01-31

    Thermochemical stability diagrams for oxide and silicide phases in mixed oxidation and silicide forming reactions are useful for the interpretation of the high temperature oxidation reactions which occur. In addition an analysis of the volatile metal and oxide species which develop at the several interfaces are useful in a complete analysis of high temperature oxidation. This work begins with a literature survey of the high temperature oxidation of metal silicides. The major part of the report is a description of the stability diagrams and the volatile species in the Ca-O-Si, C-O-Si, Fe-O-Si, Mn-O-Si, Mo-O-Si, Ni-O-Si, Nb-O-Si, Ta-O-Si, Ti-O-Si, V-O-Si, W-O-Si and Zr-O-Si systems. The importance of forming a SiO/sub 2/(s) film, the volatility of metal and oxide species, the melting points of the condensed phases and the formation of SiO(g) are discussed with regard to the high temperature oxidation of the metal silicides. 37 refs., 16 figs., 19 tabs.

  20. Fabric space radiators

    SciTech Connect

    Antoniak, Z.I.; Krotiuk, W.J.; Webb, B.J.; Prater, J.T.; Bates, J.M.

    1988-01-01

    Future Air Force space missions will require thermal radiators that both survive in the hostile space environment and stow away for minimal bulk during launch. Advances in all aspects of radiator design, construction, and analysis will be necessary to enable such future missions. Currently, the best means for obtaining high strength along with flexibility is through structures known as fabrics. The development of new materials and bonding techniques has extended the application range of fabrics into areas traditionally dominated by monolithic and/or metallic structures. Given that even current spacecraft heat rejection considerations tend to dominate spacecraft design and mass, the larger and more complex designs of the future face daunting challenges in thermal control. Ceramic fabrics bonded to ultra-thin metal liners (foils) have the potential of achieving radiator performance levels heretofore unattainable, and of readily matching the advances made in other branches of spacecraft design. The research effort documented here indicates that both pumped loops and heat pipes constructed in ceramic fabrics stand to benefit in multiple ways. Flexibility and low mass are the main advantages exhibited by fabric radiators over conventional metal ones. We feel that fabric radiators have intrinsic merits not possessed by any other radiator design and need to be researched further. 26 refs., 16 figs., 17 tabs.