Science.gov

Sample records for 16fig 17fig 18fig

  1. Presidential Address: The Woman in the Case Jane Todd Crawford, 1763-1842

    PubMed Central

    Sparkman, Robert S.

    1979-01-01

    The 1978 Presidential Address of the Southern Surgical Association is dedicated to the wives of the members, past and present, in acknowledgment and appreciation of the enduring contribution that they have made to the quality and character of this association. ImagesFig. 1.Fig. 3.Fig. 4.Fig. 5.Fig. 7.Fig. 8.Fig. 9.Fig. 10.Fig. 11.Fig. 12.Fig. 13.Fig. 14.Fig. 15.Fig. 16.Fig. 17.Fig. 18.Fig. 19.Fig. 20. PMID:375854

  2. The respiratory epithelium of the lung in the green turtle (Chelonia mydas L.).

    PubMed Central

    Solomon, S E; Purton, M

    1984-01-01

    The chelonian lung exhibits reptilian, mammalian and avian features. The respiratory epithelium is typically vertebrate, i.e. pseudostratified columnar with cilia; gaseous exchange areas appear at all levels from the respiratory bronchi down to the alveoli. The latter are invested with a capillary network and both type I and type II cells are present. The possible functional significance of the distribution of collagen, elastic tissue, cartilage and smooth muscle is discussed. Images Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:6490523

  3. An ultrastructural study of the cere of the domestic pigeon (Columba livia).

    PubMed Central

    Purton, M D

    1988-01-01

    The relative scarcity of primary and secondary skin infections in birds depends, at least in part, on the functional morphological barrier presented by the avian integument. Both transmission and scanning electron microscopical techniques were used to study the ultrastructural morphology of the epidermal barrier in the cere of the domestic racing pigeon. The epidermis is composed of sebokeratocytes which are responsible for producing not only the keratin proteins of the keratinized stratum corneum, but also the lipid emulsion forming the surface lipid layer and filling the intercellular spaces. The possible importance and role of these components in the defensive barrier presented by the skin is discussed. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 PMID:3198483

  4. Objectivity in the classification of tumours of the nasal epithelium

    PubMed Central

    Michaels, L.; Hyams, V. J.

    1975-01-01

    A survey of tumours derived from each of the four cell types of nasal epithelium is presented. Criticism is levelled at the adoption of additional terms for tissue types such as lympho-epithelium and transitional cell epithelium and tumours said to be derived from them. Electron microscopy is of assistance in classification particularly in the detection of evidence of keratin synthesis. The proposed classification of tumours of the nasal epithelium is: (1) Pseudostratified columnar epithelium: (a) papillary adenoma, (b) papillary carcinoma. (2) Squamous epithelium: (a) everted squamous papilloma, (b) inverted papilloma, (c) squamous carcinoma of any grade of differentiation from well differentiated to undifferentiated. (3) Melanocyte: malignant melanoma. (4) Olfactory neuroepithelium: olfactory neuroblastoma. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 21Fig. 20 PMID:1197175

  5. Electron Microscopy of the Cell

    PubMed Central

    Leeson, T. S.

    1965-01-01

    The use of the electron microscope has added much to our knowledge of the cell. The fine structure of the component parts of the nucleus and the cytoplasm is described, and their functions are indicated. The nature and structural modifications of the plasma membrane are illustrated with particular reference to function. To illustrate the interrelationships of the nucleus and cytoplasm, the theory of protein secretion is discussed, the secretion of a particular protein or polypeptide being determined by a particular nucleotide sequence in the desoxyribonucleic acid of a chromosome, that is, by a gene. This information is transferred from nucleus to cytoplasm. It is in the cytoplasm that the majority of the work is performed while the nucleus directs the work of the cell. ImagesFig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 23Fig. 24Fig. 25Fig. 26 PMID:5829410

  6. Conservative surgical treatment of reflux esophagitis and esophageal stricture.

    PubMed Central

    Herrington, J L; Wright, R S; Edwards, W H; Sawyers, J L

    1975-01-01

    During a recent 3-year period, 17 consecutive patients were seen with advanced fibrotic esophageal strictures secondary to alkaline-acid-pepsin reflux. From detailed preoperative evaluations alone it was impossible to determine whether therapy should consist of excisional surgery, esophagogastroplasty or intra-operative dilatation with correction of reflux. Only at operation could the length, extent, degree and severity of the stricture be fully determined. Each of the 17 patients was treated by controlled dilatation, coupled with an antireflux procedure. This simplified approach proved successful on strictures thought preoperatively to be undilatable. It appears that this conservative approach is applicable to many advanced strictures and excisional and plastic procedures should be reserved for those cases that prove unyielding to intraoperative dilatation. The true appraisal of a reflux stricture and the choice of surgical procedure is best determined at the operating table. Images Fig. 5A. Fig. 5B. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10. Fig. 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 17. Fig. 18. Fig. 19. Fig. 20. Fig. 21. PMID:1130874

  7. Cryoscanning electron microscopic study of the surface amorphous layer of articular cartilage.

    PubMed Central

    Kobayashi, S; Yonekubo, S; Kurogouchi, Y

    1995-01-01

    In order to elucidate the structure near the articular surface, frozen unfixed hydrated articular cartilage with subchondral bone from the pig knee was examined using a cryoscanning electron microscope (cryo-SEM). This method is considered to reduce the introduction of artefacts due to fixation and drying. An amorphous layer, without a collagen-fibril network or chondrocytes, covered most of the surface of the cartilage. This layer was termed the surface amorphous layer. It showed various appearances, which were classified into 4 groups. The average thickness of the layer did not differ among the 8 anatomical regions from which the specimens were taken. The thickness of the layer was found to correlate with the type of appearance of the layer. The 4 appearances associated with thicknesses in descending order are: 'streaked', 'foliate', 'spotted', and 'vestigial'. The surface layer observed in the cryo-SEM was thicker than that observed by a conventional SEM. This difference may be attributable to dehydration of the specimen used in specimen preparation for the latter technique. The layer was also observed in articular cartilage taken from human and rabbit knees. The layer was found to be unstable and to have very variable features. Its thickness and appearance may be influenced by various factors such as dehydration, fluid absorption or mechanical stress. Images Fig. 1 Fig. 3 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:7592006

  8. Laboratory Design for Microbiological Safety

    PubMed Central

    Phillips, G. Briggs; Runkle, Robert S.

    1967-01-01

    Of the large amount of funds spent each year in this country on construction and remodeling of biomedical research facilities, a significant portion is directed to laboratories handling infectious microorganisms. This paper is intended for the scientific administrators, architects, and engineers concerned with the design of new microbiological facilities. It develops and explains the concept of primary and secondary barriers for the containment of microorganisms. The basic objectives of a microbiological research laboratory, (i) protection of the experimenter and staff, (ii) protection of the surrounding community, and (iii) maintenance of experimental validity, are defined. In the design of a new infectious-disease research laboratory, early identification should be made of the five functional zones of the facility and their relation to each other. The following five zones and design criteria applicable to each are discussed: clean and transition, research area, animal holding and research area, laboratory support, engineering support. The magnitude of equipment and design criteria which are necessary to integrate these five zones into an efficient and safe facility are delineated. Images Fig. 1 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:4961771

  9. New surgical concepts resulting from cranio-orbito-facial surgery.

    PubMed Central

    Edgerton, M T; Jane, J A; Berry, F A; Marshall, K A

    1975-01-01

    The authors have defined the subspecialty of craniofacial surgery and described the organization of the multi-disciplinary team required to care for such patients. Common features of the craniofacial patient have been summarized and three major categories of patients have been proposed. These are: I. Syndromes associated with hypertelorism; II. Syndromes associated with premature synostoses or growth arrests; III. Syndromes associated with primarily mid- and lower face anomalies. Growing out of an experience with 242 operations on 106 patients, the authors have listed 9 relatively new surgical "principles." Each has led to a current surgical approach that is now being employed by the craniofacial team at The University of Virginia. A number of examples are given to show ways in which the lessons learned from the craniofacial patients are now being applied, with improved results, to patients with neoplasms, traumatic injuries, or other conditions. Images Fig. 1. Fig. 2. Fig. 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10. Fig. 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 17. Fig. 18. Fig. 19. Fig. 20. Fig. 21. Fig. 22. PMID:1099994

  10. Colour thresholding in video imaging.

    PubMed Central

    Fermin, C D; Degraw, S

    1995-01-01

    The basic aspects of video imaging are reviewed as they relate to measurements of histological and anatomical features, with particular emphasis on the advantages and disadvantages of colour and black-and-white imaging modes. In black-and-white imaging, calculations are based on the manipulation of picture elements (pixels) that contain 0-255 levels of information. Black is represented by the absence of light (0) and white by 255 grades of light. In colour imaging, the pixels contain variation of hues for the primary (red, green and blue) and secondary (magenta, yellow, cyan, pink) colours. Manipulation of pixels with colour information is more computer intense than that for black-and-white pixels, because there are over 16 million possible combinations of colour in a system with a 24-bit resolution. The narrow 128 possible grades of separation in black and white often makes distinction between pixels with overlapping intensities difficult. Such difficulty is greatly reduced by colour thresholding of systems that base the representation of colour on a combination of hue-saturation-intensity (HSI) format. Images Fig. 3 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 PMID:7559121

  11. Encrustation and Atherosclerosis: The Analogy Between Early in Vivo Lesions and Deposits Which Occur in Extracorporeal Circulations

    PubMed Central

    Murphy, E. A.; Rowsell, H. C.; Downie, H. G.; Robinson, G. A.; Mustard, J. F.

    1962-01-01

    A study was made of the relation between the pattern and topography of thrombus formation in models of various vessel configurations coupled into extracorporeal shunts in swine and the development of atherosclerosis at corresponding sites on swine aortas. The pattern and distribution of deposits formed in the models were strikingly similar to the pattern and distribution of incipient atherosclerosis at comparable sites in the vascular tree. The earliest and only consistent component of the flow chamber deposits was the blood platelet. The platelet deposits would frequently stain with oil red O. The cholesterol level of washed human platelets was found to show a good correlation with that in the plasma. This evidence suggests that deposition of particulate matter (chiefly platelets), largely determined by the hydraulic factors, may be an important factor in the early, as well as later, stages of atherosclerosis. ImagesFigs. 10a and bFig. 13Fig. 21Fig. 1Fig. 3Figs. 4a and bFig. 5Fig. 6aFig. 6bFig. 7Fig. 8Fig. 9Fig. 11Fig. 12Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20 PMID:14477412

  12. Variability of dermal elastin visualized ultrastructurally with iron hematoxylin.

    PubMed Central

    Spicer, S. S.; Brissie, R. M.; Thompson, N. T.

    1975-01-01

    The Verhoeff iron hematoxylin-lead citrate (VIH-LC) method demonstrated vertical elastic fibers that were often composed only of microfibrillar component extending into the epidermal basement membrane in human skin. These fibers connected with a network of trabeculae composed of microfibrils and elastin fibrils in varying proportions. The large elastic fibers in the deep two thirds of the dermis consited mainly of compact bundles of small elstin fibrils in infants and of solid elastin cores with a fimbriated periphery in adults; Dermis of a 6-month-old fetus contained very few small elastic fibrils except around blood vessels. Skin of an elderly subject revealed exteme proliferation of unusual reticulated elastic fibers in various areas and disclosed abnormal nodules of elastin or collagen fibrils in finely particulate matter. Small elastin fibrils, abundant microfibrils, and intermixed individual collagen fibrils comprised an adventitial collar between sweat glands and fibroblasts. Elastin fibrils were absent from this collar in the fetus and increased with the subject's age. A permanganate-high iron diamine sequence appeared to impart density to the microfibrillar component of elastic fibers. Images Figs 6-7 Fig 8 Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 Fig 14 Fig 15 Fig 16 Fig 17 Fig 18 Fig 19 Fig 20 Fig 21 Fig 22 Fig 23 Fig 24 Fig 25 Fig 26 Fig 27 Fig 1 Fig 2 Figs 3-5 Fig 28 Fig 29 Fig 30 Fig 31 Fig 32 Fig 33 PMID:49149

  13. The extent of the odontoblast process in the cat.

    PubMed Central

    Holland, G R

    1976-01-01

    Earlier work has shown that in the dentine of cats perfused with aldehyde fixatives for short periods the odontoblast process seems to be limited to inner dentine. This could possibly have been an artefact due either to inadequate penetration of the fixative or shrinkage of the cells. Experiments prolonging the duration of the fixation and raising the concentration of the fixatives, examining dentine from regions and species where it is narrow and more accessible to fixatives, and looking at dentine fixed by immersion both in situ and after excision, all showed the process to be limited to inner dentine. Measruing glutaraldehyde penetration through model dentine and also through dentine in the perfused animal showed that this fixative penetrates the dentine well. Variations in fixative osmotic pressure, while having a profound effect on cells and processes in vitro and causing changes in cell shape in the intact animal, do not neasurably alter the extent of the odontoblast process. The conclusion is that the odontoblast process in the cat is limited to the pulpal half of the dentine. As a consequence, no cellular mechanism can be involved in the transmission of stimuli across the outer dentine. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 PMID:815232

  14. Pediatric osteomyelitis and septic arthritis: the pathology of neonatal disease.

    PubMed Central

    Ogden, J. A.

    1979-01-01

    The morphologic and histologic examination of over fifty-five foci of metaphyseal/epiphyseal osteomyelitis and eleven septic joints from five cases of neonatal osteomyelitis and joint sepsis are described in detail. The severity of the bone and joint involvement varied considerably, allowing a better understanding of the pathophysiologic sequence of events in the disease in the neonatal time period. Of particular importance were (1) the multifocal nature of the disease, (2) the highly variable destruction of the growth plate (physis) by several discrete mechanisms, and (3) the invasion of the chondroepiphysis through the cartilage canal systems. Two of the cases died from respiratory complications several months following presumed successful treatment of their skeletal infections. S&pecimens showed significant growth plate damage continuing beyond the neonatal period. These findings support the need for rapid diagnosis and drainage, whenever feasible, to prevent long-term skeletal growth damage. The severity of involvement also should emphasize that this disease, especially in the neonate, is not an innocuous condition, as a recent review suggested. Images FIG. 1 FIG. 2 FIG. 3 FIG. 4 FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 9 FIG. 10 FIG. 11 FIG. 12 FIG. 13 FIG. 14 FIG. 15 FIG. 16 FIG. 17 FIG. 18 FIG. 19 FIG. 20 PMID:524924

  15. The fine structure of initial mineralisation during tooth development in the gummy shark, Mustelus manazo, Elasmobranchia.

    PubMed Central

    Sasagawa, I

    1989-01-01

    In the enameloid matrix a large number of tubular vesicles appeared around the odontoblast processes at the stage of enameloid matrix formation. The tubular vesicles were limited by unit membrane and the membrane often seemed to connect with that of the odontoblast processes. The tubular vesicles probably originated from the odontoblasts. Electron-dense granules were observed in the tubular vesicles before the appearance of crystals and then, in the stage of mineralisation, initial enameloid crystals appeared in each tubular vesicle. Parts of the odontoblast process surrounded small aggregations of tubular vesicles in the unmineralised dentine matrix. There were many multivesicular bodies and lysosomes in the odontoblasts forming the dentine. The odontoblasts probably absorb and break down the tubular vesicles after the beginning of dentinogenesis. Only in the predentine, during the enameloid maturation stage, did a few matrix vesicles appear, but no crystals were found in them. Hence, the initial mineralisation in tooth germs of the shark can be said to be different from that in teleosts. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 PMID:2606790

  16. Structural changes in fluorosed dental enamel of red deer (Cervus elaphus L.) from a region with severe environmental pollution by fluorides.

    PubMed Central

    Kierdorf, U; Kierdorf, H; Sedlacek, F; Fejerskov, O

    1996-01-01

    A macroscopic, microradiographic and scanning electron microscope study was performed on the structure of fluorosed dental enamel in red deer from a fluoride polluted region (North Bohemia, Czech Republic). As was revealed by analysis of mandibular bone fluoride content, the rate of skeletal fluoride accumulation in the fluorotic deer was about 6 times that in controls taken from a region not exposed to excessive fluoride deposition. In all fluorosed mandibles, the 1st molar was consistently less fluorotic than the other permanent teeth. This was related to the fact that crown formation in the M1 takes place prenatally and during the lactation period. Fluorosed teeth exhibited opaque and posteruptively stained enamel, reduction or loss of enamel ridges, moderately to grossly increased wear and, in more severe cases, also enamel surface lesions of partly posteruptive, partly developmental origin. Microradiographically, fluorosed enamel was characterised by subsurface hypomineralisation, interpreted as a result of fluoride interference with the process of enamel maturation. In addition, an accentuation of the incremental pattern due to the occurrence of alternating bands with highly varying mineral content was observed in severely fluorosed teeth, denoting fluoride disturbance during the secretory stage of amelogenesis. A corresponding enhancement of the incremental pattern was also seen in the dentine. The enamel along the more pronounced hypoplasias consisted of stacked, thin layers of crystals arranged in parallel, indicating that the ameloblasts in these locations had lost the distal (prism-forming) portions of their Tomes processes. The findings of the present study indicate that red deer are highly sensitive bioindicators of environmental pollution by fluorides. Images Figs 2-9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 PMID:8655406

  17. Cell death during the postnatal morphogenesis of the normal rabbit kidney and in experimental renal polycystosis.

    PubMed Central

    García-Porrero, J A; Ojeda, J L; Hurlé, J M

    1978-01-01

    We have studied, by means of optic and electron microscopy, the normal and abnormal cell death that takes place during the postnatal morphogenesis of rabbit kidney, and in the experimental renal polycystosis produced by methylprednisolone acetate. In the normal kidney intertubular cell death can be observed during the first 20 days of the postnatal development. However, cell death in the normal metanephric blastema is a very rare event. In the polycystic kidney numerous dead cells can be seen between the third and forty eighth days after injection. The topography and morphology of the dead cells depend on the stage in the evolution of the disease. In the 'stage of renal immaturity', dying and dead cells are present in the nephrogenic tissue, in the dilating collecting tubules and in the intertubular spaces. In this stage the cellular pathology is essentially nuclear. In the stage of tubular cysts, the dead cells are mostly located in the walls of cysts, with some dead cells, but mostly cellular debris in their lumina. At this stage the cellular pathology is basically cytoplasmic. The dead cells are eventually digested by what appear to be phagocytes of tubular epithelial origin. It is suggested that cell death is an important factor in the evolution of the lesions of renal polycystosis induced by corticosteroids, and probably in the initiation of the pathological process as well. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:670065

  18. Haemopoietic phagocytes in the early differentiating avian retina.

    PubMed Central

    Cuadros, M A; García-Martín, M; Martin, C; Ríos, A

    1991-01-01

    The existence of specialised phagocytic cells is described in regions of the retinal neuroepithelium undergoing intense cell death during early differentiation of the avian embryo retina (2.5-5 days of incubation). These results were obtained using routine techniques for light microscopy, acid phosphatase histochemistry and immunocytochemical staining with antibodies MB-1 and QH-1, both specific for quail endothelial cells and all blood cells except mature erythrocytes. Specialised phagocytes were distinguishable from neuroepithelial cells on the basis of morphological criteria: in the former, the nucleus was not oval in shape and was not oriented perpendicular to basement membrane neuroepithelium. The cytoplasm of the specialised phagocytes was often filled with dead cell fragments. In contrast to neuroepithelial cells, the specialised phagocytes showed acid phosphatase activity and were labelled with both MB-1 and QH-1 antibodies in normal quail embryos and chick----quail yolk sac chimeras. Moreover, some acid phosphatase positive and MB-1/QH-1 positive cells also appeared in the presumptive vitreous body, at the edges of the optic cup and in the surrounding mesenchyme. As the vitreal cells and the specialised phagocytes of the neural retina were immunolabelled in chick----quail yolk sac chimeras, we conclude that they are derived from haemopoietic cells in the yolk sac. Some images suggest that these cells enter the vitreous body from the surrounding mesenchyme and traverse the basement membrane of the neuroepithelium in the optic disc region to give rise to the specialised phagocytes of the retinal neuroepithelium. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 PMID:1769889

  19. An ultrastructural study of the stellate ganglion of the pig-tailed monkey (Macaca nemestrina).

    PubMed Central

    Leong, S K; Wong, W C

    1989-01-01

    The stellate ganglia of Macaca nemestrina were studied with the electron microscope, using the conventional and chromate-dichromate methods of aldehyde fixation. The principal neurons are multipolar and mostly mononucleated. They measure between 10 and 50 microns in their average somal diameters. The organelles of the perikaryon are arranged in perinuclear, intermediate and peripheral zones. Unusual organelles consisting of stacks of closely apposed paired membranes, with or without dense bodies studded on their surfaces, are encountered. Nuclear eccentricity is a regular feature of the neuron and the nuclear membrane shows a varying degree of invagination. All parts of the neurons are surrounded by satellite or Schwann cells though dendritic surfaces in direct contact with the basal lamina associated with the satellite cells are not uncommonly seen. Features peculiar to dendrites have been described. Structures resembling dendritic growth cones are present in abundance. Most synapses are axodendritic; axosomatic synapses are much less frequently encountered. While most synapses are of the simple type, complex types are also present. Desmosome-like junctional complexes exist between dendrites, dendrites and somata and axons and dendrites. Differences between Schwann cells of myelinated axons and those of myelinated axons and satellite cells have been noted. In addition to an abundance of macrophages, other connective tissue cells such as mast cells, fibroblasts and plasma cells are also present. Degenerative profiles observed include neuronal cell bodies and cell processes, especially dendrites. They are phagocytosed by the satellite cells and macrophages. The presence of degenerative profiles, chromatolytic neurons and structures resembling dendritic growth cones in the normal stellate ganglion has been discussed. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Figs. 19

  20. The harderian gland: a tercentennial review.

    PubMed Central

    Payne, A P

    1994-01-01

    The harderian gland was first described in 1694 by Johann Jacob Harder (1656-1711). It occurs in most terrestrial vertebrates and is located within the orbit where, in some species, it is the largest structure. It may be compound tubular or compound tubuloalveolar, and its secretory duct is usually morphologically distinct only after leaving the substance of the gland to open on the surface of the nictitating membrane. The tubules of the gland are formed of a single layer of columnar epithelial cells surrounded by myoepithelial cells. The chief product(s) of the gland varies between different groups of vertebrates, and epithelial cells possess granules or vacuoles whose contents may be mucous, serous or lipid. In rodents, the gland synthesises lipids, porphyrins and indoles. In the case of lipid vacuoles, the gland is unusual in releasing these by an exocytotic mechanism. It is unclear whether the gland can act both as an exocrine and endocrine organ. There is control of gland structure and synthesis through a variety of humoral agents, including gonadal, thyroid and pituitary hormones; in addition there is a rich autonomic innervation and many neuropeptides have been identified. The proposed functions of the gland are remarkably diverse and include the gland being (1) a source of 'saliva', (2) a site of immune response, (3) a photoprotective organ, (4) part of a retinal-pineal axis, (5) a source of pheromones, (6) a source of thermoregulatory lipids, (7) a site of osmoregulation, and (8) a source of growth factors. The gland is discussed in terms of its embryology and phylogeny, and in relation to ecological variables. Several goals of future research are identified. Images Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 36 Fig. 37 Fig. 38 Fig. 40 PMID:7559104

  1. The harderian gland of desert rodents: a histological and ultrastructural study.

    PubMed Central

    Djeridane, Y

    1992-01-01

    . Mast cells, plasma cells, macrophages, fenestrated capillaries and unmyelinated nerve endings with clear or dense-cored vesicles are present in the connective tissue. Melanocytes are very numerous in the interstices of the Gerbillidae harderian gland. The gland is surrounded by a collagenous capsule and an outer layer of endothelial cells derived from the orbital venous sinus. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 PMID:1487439

  2. Surgical management of chronic pulmonary embolism.

    PubMed Central

    Chitwood, W R; Lyerly, H K; Sabiston, D C

    1985-01-01

    another was massively obese with severe congestive heart failure and expired in the hospital a week later. In this group of 11 patients, three succumbed and most of the others are currently totally debilitated at rest (NYHA Class IV). Long-term follow-up of the surgically managed patients (1 to 15 years) shows that ten patients improved from NYHA functional Class IV to either I or II, another patient from Class III to Class I, and a final patient was only minimally improved.(ABSTRACT TRUNCATED AT 400 WORDS) Images FIG. 1. FIG. 1. FIG. 4. FIG. 5. FIG. 6. FIG. 10. FIG. 13. FIG. 14. FIG. 15. FIG. 16. FIG. 17. FIG. 18. FIG. 19. FIG. 20. FIG. 21. FIG. 22. FIG. 23. PMID:3966827

  3. The cranial cartilages of teleosts and their classification.

    PubMed Central

    Benjamin, M

    1990-01-01

    The structure and distribution of cartilages has been studied in 45 species from 24 families. The resulting data have been used as a basis for establishing a new classification. A cartilage is regarded as 'cell-rich' if its cells or their lacunae occupy more than half of the tissue volume. Five classes of cell-rich cartilage are recognised (a) hyaline-cell cartilage (common in the lips of bottom-dwelling cyprinids) and its subtypes fibro/hyaline-cell cartilage, elastic/hyaline-cell cartilage and lipo/hyaline-cell cartilage, (b) Schaffer's Zellknorpel, typified by the cartilage in the gill filaments of most teleosts examined, (c) elastic/cell-rich cartilage, such as that which supports the barbels and oral valves of catfish, e.g. Corydoras metae, (d) fibro/cell-rich cartilage, as in the submaxillary meniscus of Sphaerichthys osphromenoides, (e) cell-rich hyaline and (f) matrix-rich hyaline cartilage--both of which are common in the neurocranium and gill arches of most teleosts. The range of cartilages seen, and the predominant cartilage type, is recorded for each species and a list is provided of the tissues that most typify different organs or regions of the head. As a preliminary pointer to developmental relationships between the cartilages, note was taken of gradual transitions between one cartilage and another. It is suggested that hyaline-cell cartilage occupies a key position in teleosts as the most labile of the supporting tissues and is highly characteristic of Cypriniformes. The cartilage that best resembles mammalian hyaline cartilage (matrix-rich hyaline cartilage) has a very conservative distribution in different skeletal elements and the least number of associations with other tissues. It is well represented in Siluriformes. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 24 Fig. 25 Fig. 26 Fig. 27 PMID:2384333

  4. Morphological and functional interrelationships of articular cartilage matrices.

    PubMed Central

    Poole, C A; Flint, M H; Beaumont, B W

    1984-01-01

    synergistically to produce an integrated, biological, hydro-elastic suspension system capable of resisting physiological compression. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 PMID:6706831

  5. Endemic syphilis in the Bakwena Reserve of the Bechuanaland Protectorate

    PubMed Central

    Murray, J. F.; Merriweather, A. M.; Freedman, M. L.

    1956-01-01

    A form of endemic syphilis exists in the Bakwena Reserve of the Bechuanaland Protectorate known by the local name of “dichuchwa”. It is similar to bejel, njovera and the endemic syphilis reported elsewhere in the world. The Government of the Protectorate, with the assistance of WHO and UNICEF, began in November 1953 a mass campaign in the Reserve to control this disease and, at the same time, to study its epidemiological, clinical, social and therapeutic aspects. The seropositivity rate in the Reserve was found to be 37%. Dichuchwa is a childhood and family disease, usually spread non-venereally. The early lesions are similar to secondary lesions of sporadic venereal syphilis, and are often followed by tertiary lesions affecting mainly the skin, nasopharynx and long bones. Primary lesions are rare but may occur under certain epidemiological conditions if the inoculum is sufficiently large; thus a mother may develop primary sores on the nipples through suckling an infected infant. Lesions of the cardiovascular and central nervous systems and congenital syphilis are also rare. Superinfection of an already infected and allergic host is probably the chief reason for the frequency of the tertiary lesions. Treatment of the disease with penicillin is very effective, and the authors believe that mass treatment of cases and contacts combined with an improvement in the standards of hygiene could eradicate the disease. ImagesFig. 61Fig. 62Fig. 63Fig. 64Fig. 74Fig. 75Fig. 76Fig. 1Fig. 2Fig. 3Fig. 16Fig. 17Fig. 18Fig. 43Fig. 44Fig. 45Fig. 7Fig. 8Fig. 9Fig. 13Fig. 14Fig. 15Fig. 31Fig. 32Fig. 33Fig. 50Fig. 51Fig. 52Fig. 53Fig. 54Fig. 55Fig. 56Fig. 34Fig. 35Fig. 36Fig. 46Fig. 47Fig. 48Fig. 49Fig. 22Fig. 23Fig. 24Fig. 10Fig. 11Fig. 12Fig. 57Fig. 58Fig. 59Fig. 60Fig. 65Fig. 66Fig. 67Fig. 19Fig. 20Fig. 21Fig. 4Fig. 5Fig. 6Fig. 68Fig. 69Fig. 70Fig. 71Fig. 72Fig. 73Fig. 37Fig. 38Fig. 39Fig. 28Fig. 29Fig. 30Fig. 25Fig. 26Fig. 27Fig. 40Fig. 41Fig. 42 PMID:13404470

  6. Pacesetters of the American image or (a case for a pleasant diversion).

    PubMed Central

    Hook, E. W.

    1992-01-01

    Regardless of how you resolve the morality of our history, the fact is that Currier and Ives documented in their own special and often biased way the iconography of the growth and development of the United States of America (Fig. 88) in some of the most eventful years of its history from about 1840 through 1895. Now, as we near our 500th anniversary commemoration of Columbus' voyage to the Americas, it seems especially appropriate to review--to think about all of this. I think you have sensed, as we have gone along, that learning about Currier and his colleagues--these pacesetters of the American Image--has meant, as Osler predicted, a pleasant diversion for me. These activities have carried me into new areas of interest, expanding my perspective of the American Image--of people, of medicine, of life in general, and aiding in the identification of values, my own, as well as those of others. All along, my knowledge has been enhanced, especially of the history of this wonderful complex country of ours. Furthermore, and of considerable importance, this endeavor has sharpened my power of observation. I have, like a good doctor should do, learned to look better! Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 19 Fig. 18 Fig. 20 Fig. 21 Fig. 23 Fig. 25 Fig. 27 Fig. 26 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 Fig. 36 Fig. 37 Fig. 39 Fig. 40 Fig. 41 Fig. 42 Fig. 43 Fig. 44 Fig. 45 Fig. 46 Fig. 47 Fig. 48 Fig. 49 Fig. 50 Fig. 51 Fig. 52 Fig. 53 Fig. 54 Fig. 55 Fig. 56 Fig. 57 Fig. 58 Fig. 59 Fig. 60 Fig. 61 Fig. 62 Fig. 63 Fig. 64 Fig. 65 Fig. 66 Fig. 68 Fig. 67 Fig. 69 Fig. 70 Fig. 71 Fig. 72 Fig. 73 Fig. 74 Fig. 75 Fig. 76 Fig. 77 Fig. 78 Fig. 79 Fig. 80 Fig. 82 Fig. 81 Fig. 83 Fig. 84 Fig. 85 Fig. 86 Fig. 87 Fig. 88 PMID:1413369

  7. The postural function of the iliotibial tract.

    PubMed Central

    Evans, P.

    1979-01-01

    A new definition of the iliotibial tract is made. Its anatomical and physical characteristics are summarised and its known functions discussed. The various postures adopted by standing Man are looked at and one resting posture is closely analysed. Hence a new role is proposed for the iliotibial tract. In the hip bone a new bony effect of the iliotibial tract is proposed. The presence of this structure is traced in the fossil record and linked to the anthropological evidence of upright posture. Images FIG. 1-8 FIG. 9-16 FIG. 17-25 FIG. 26-34 PMID:475270

  8. The Reflexes of the Fundus Oculi

    PubMed Central

    Ballantyne, A. J.

    1940-01-01

    fragmented” surface reflexes, or as evidence of the presence of some highly refractile substance, such as cholesterin or calcium carbonate, in a retinal exudate or other lesion. It is characteristic of the pathological reflexes that they come and go and change their character according to the progress of the pathological condition. The linear reflexes in particular may change from one from to another, and may be finally transformed into surface reflexes of physiological character. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 23Fig. 24Fig. 25Fig. 26 PMID:19992307

  9. The fine structure of proliferating cartilage cells: structural changes in an experimental model.

    PubMed Central

    Scheck, M; Parker, J; Sakovich, L

    1975-01-01

    Extensive development of the rough endoplasmic reticulum and comparatively less developed Golgi membranes were seen in the cells of chondrocyte clusters which had formed in the vicinity of cartilage defects produced by intra-articular papain and cortisone injections. These cells frequently showed myelin-like membranous figures. These figures were seen either close to the cell membrane, or between cells, or connected to the nuclear envelope or the endoplasmic reticulum. The hypothesis is advanced that the myelin figures are made from redundant material which was not used for membrane formation. Cortisone, which is known to interfere with mitochondrial function and general metabolic processes, could have been responsible for the deficiency in membrane differentiation and transfer. This investigation was supported by grants from the Orthopaedic Research and Education Foundation and from the Research Evaluation and Allocation Committee of the School of Medicine, Univeristy of California, San Francisco. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Figs. 7, 8 and 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Figs. 16 and 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 PMID:1141047

  10. Ultrastructural features of degenerated cardiac muscle cells in patients with cardiac hypertrophy.

    PubMed Central

    Maron, B. J.; Ferrans, V. J.; Roberts, W. C.

    1975-01-01

    Degenerated cardiac muscle cells were present in hypertrophied ventricular muscle obtained at operation from 12 (38%) of 32 patients with asymmetric septal hypertrophy (hypertrophic cardiomyopathy) or aortic valvular disease. Degenerated cells demonstrated a wide variety of ultrastructural alterations. Mildly altered cells were normal-sized or hypertrophied and showed focal changes, including preferential loss of thick (myosin) filaments, streaming and clumping of Z band material, and proliferation of the tubules of sarcoplasmic reticulum. Moderately and severely degenerated cells were normal-sized or atrophic and showed additional changes, including extensive myofibrillar lysis and loss of T tubules. The appearance of the most severely degenerated cells usually reflected the cytoplasmic organelle (sarcoplasmic reticulum, glycogen, or mitochondria) which underwent proliferation and filled the myofibril-free areas of these cells. Moderately and severely degenerated cells were present in areas of fibrosis, had thickened basement membranes, and had lost their intercellular connections. These observations suggest that degenerated cardiac muscle cells have poor contractile function and may be responsible for impaired cardiac performance in some patients with chronic ventricular hypertrophy. Images Fig 1 Fig 2 Fig 3 Figs 4-6 Figs 7-8 Fig 9 Fig 10 Fig 11 Figs 12-15 Fig 16 Fig 17 Figs 18-21 Figs 22-23 Fig 24 Fig 25 Fig 26 Fig 27 Figs 28-29 Fig 30 Figs 31-32 Fig 33 PMID:124533

  11. Synaptic transmission in the superior cervical ganglion of the cat after reinnervation by vagus fibres

    PubMed Central

    Ceccarelli, B.; Clementi, F.; Mantegazza, P.

    1971-01-01

    1. A vagus-sympathetic anastomosis was performed in the cat by connecting end to end the cranial trunk of the vagus to the cranial end of the cervical sympathetic trunk, both severed under the ganglia. 2. Forty to sixty days after the anastomosis, the ocular signs of sympathetic paralysis (such as myosis and prolapse of the nictitating membrane) which had developed shortly after the operation, had completely disappeared, thus suggesting the recovery of synaptic transmission in the ganglion. In case of plain preganglionic denervation after the same period the ocular signs of cervical sympathetic paralysis were still present. 3. Contraction of the nictitating membrane could be induced by electrical stimulation of both the vagus preanastomotic and the sympathetic postanastomotic—preganglionic trunks. Ganglionic blocking agents induced the blockade of the `new' ganglionic synaptic function, while nicotine and pilocarpine provoked a marked contraction of the nictitating membrane. 4. Electron microscopy showed that the preganglionic regeneration of vagus fibers resulted in the formation of new synapses, mainly of axodendritic type, identical to normal ganglionic synapses. Moreover, after cutting the preanastomotic trunk of the vagus, these new ganglionic presynaptic profiles degenerated, thus proving their vagal origin. 5. During restoration of the synaptic contacts readjustment of dendritic tips occurred. ImagesText-fig. 2Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 16Fig. 17Fig. 14Fig. 15Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 7Fig. 8 PMID:4326851

  12. A morphological study of experimental rabbit staphylococcal endocarditis and aortitis. I. Formation and effect of infected and uninfected vegetations on the aorta.

    PubMed Central

    Ferguson, D. J.; McColm, A. A.; Savage, T. J.; Ryan, D. M.; Acred, P.

    1986-01-01

    In this study the development of sterile thrombic vegetations on the aorta resulting from catheterization and the effect of subsequent infection with Staphylococcus aureus were examined by light and electron microscopy. Thrombi of various sizes, comprising fibrin, platelets and a few leucocytes and erythrocytes, develop on the damaged surface of the aorta with minimal changes in the underlying aortic wall. After intravenous inoculation of Staph. aureus most vegetations become infected, as shown by the presence of bacterial colonies, and the underlying aortic wall is markedly inflamed. The inflammatory cells invade the wall from the base of the aorta and cause swelling plus disruption of the elastic laminae with ulceration of the luminal surface in some cases. This structural damage appears to be a direct result of the bacterial infection of the lesions on the luminal surface. Images Fig. 15 Fig. 16 Fig. 17 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 PMID:3790427

  13. An electron microscopical study of chronic ulcers of the colon in rats.

    PubMed Central

    Reeve, D. R.

    1977-01-01

    Chronic colonic ulcers in the rat were produced by the administration of a hydrogen peroxide enema. Lesions of up to 10 months' duration were obtained by this method and a selection was examined ultrastructurally. It was hoped that the study would reveal causes for the chronicity of the lesions. From previous work it appeared that there was no failure of epithelial migration from the edge of the wound. The majority of cells at the ulcer margins demonstrated features of regeneration similar to those seen in other tissues, and that there were no specific changes concomitant with chronic ulceration. The majority of epithelial cells at the ulcer edge showed features of differentiation which indicated that there was no obvious fault in this process so essential to the basic requirements of tissue repair. It is possible that chronicity is produced by a failure of the epithelio-mesenchymal interaction mechanisms which, potentiated by an ischaemia resulting from submucosal vascular damage, results in the consequential death of migrating epithelial cells. This hypothesis is supported by the appearance of a squamous metaplasia in the healing lesions, a process which is commonly attributed to a chronic inflammatory response which may be induced by a relative vascular insufficiency. Images Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 1 Fig. 2 Fig. 3 Fig. 8 Fig. 9 Fig. 10 PMID:836769

  14. Ultrastructural Changes in Chick Cerebellum Induced by Polyinosinic Polycytidylic Acid

    PubMed Central

    Yu, Mang C.; Young, Paul A.; Yu, Wan-Hua Amy

    1971-01-01

    The ultrastructural changes in cerebellar encephalopathy induced by intravenous injection of poly I:C in young chickens were studied. The neuroglia and the small blood vessels showed the most severe injury. In the astroglia, initial alterations consisted of a mild cytoplasmic swelling whereas terminally, evagination of the outer nuclear membrane, formation of large vacuoles, and mitochondrial swelling occurred. In the cortex, oligodendroglial alterations consisted of dilatation of the nuclear membranes and of the endoplasmic reticulum, whereas in the white matter, the interfascicular oligodendroglia exhibited clumping and coagulation of the chromatin material. Some small blood vessels appeared normal, while others showed massive erosion of the endothelium resulting in aneurysm-like ballooning of the vascular wall. The granule cells displayed marked edema. The myelin of nerve fibers showed an accumulation of fluid initially, with splitting occurring in the terminal stages. These studies indicated a severe cytotoxic effect of poly I:C on the cerebella of young chickens. ImagesFig 16Fig 17Fig 13Fig 14Fig 15Fig 5Fig 6Fig 7Fig 8Fig 9Fig 10Fig 11Fig 12Fig 1Fig 2Fig 3Fig 4 PMID:5142269

  15. A Novel Method of Natural Cryoprotection 1

    PubMed Central

    Hirsh, Allen G.; Williams, Robert J.; Meryman, Harold T.

    1985-01-01

    Correlating measurements from differential scanning calorimetry, freeze-fracture freeze-etch electron microscopy, and survival of twigs after two-step cooling experiments, we provide strong evidence that winter-hardened Populus balsamifera v. virginiana (Sarg.) resists the stresses of freezing below −28°C by amorphous solidification (glass formation) of most of its intracellular contents during slow cooling (≤5°C per hour). It is shown that other components of the intracellular medium go through glass transitions during slow cooling at about −45°C and below −70°C. This `three glass' model was then used to predict the results of differential scanning calorimetry, freeze-fracture freeze-etch electron microscopy, and biological experiments. This model is the first definitive explanation for the resistance of a woody plant to liquid N2 temperatures even if quench cooling (1200°C per minute) begins at temperatures as high as −20°C and warming is very slow (≤5°C per hour). It is also the first time high temperature natural intracellular glass formation has been demonstrated. Images Fig. 15 Fig. 16 Fig. 17 Fig. 18 PMID:16664400

  16. The Treatment of the Incompletely Descended Testis

    PubMed Central

    Wilson, D. S. Poole

    1939-01-01

    (1) Under three years of age the diagnosis of the incompletely descended testis is uncertain. (2) The policy of awaiting spontaneous descent may be pursued until 10 years of age but, unless the testis lies in the superior scrotal position, this policy should not be persisted in thereafter. (3) Hormonal therapy may be employed before operative treatment as a means of determining testes which will descend spontaneously. It should only be used in the prepuberty period. (4) Operative treatment may be safely carried out at any age after 3 years and should be completed before puberty. The optimum period is between 8 and 11 years. The Bevan operation may be successful when the testis is very mobile but the most consistent results are obtained by the septal transposition or Keetley-Torek operations. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 8Fig. 9Fig. 10Fig. 13Fig. 14Fig. 15Fig. 16Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22 PMID:19991991

  17. Joint remodelling and the evolution of the human hand.

    PubMed Central

    Lewis, O J

    1977-01-01

    A funtional morphological study has been made of the joints of the primate hand, particular emphasis being placed upon the carpometacarpal and metacarpophalangeal joints. The presumptive evolutionary history of these joints has been charted by reference to a comparative series of mammals. It has been demonstrated that the human joints have been quite strikingly modified in a number of ways, and that these evolutionary changes may be logically correlated with the refined functional attributes of the human hand. The morphological background thus established has been applied in a preliminary study of the hand bones of various fossil hominids. Images Fig. 7 Fig. 8 Figs. 15 and 16 Figs. 17 and 18 Figs. 19 and 20 Fig. 21 Fig. 22 Fig. 23 Figs. 24 and 25 Figs. 26 and 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 Fig. 36 Fig. 37 Fig. 38 Fig. 39 Fig. 40 Fig. 41 Fig. 42 Fig. 43 Fig. 44 Fig. 45 PMID:402345

  18. Age related changes and osteochondrosis in swine articular and epiphyseal cartilage: light ane electron microscopy.

    PubMed Central

    Bhatnagar, R; Christian, R G; Nakano, T; Aherne, F X; Thompson, J R

    1981-01-01

    Age related changes and osteochondrosis in swine were studied using light microscopy and electron microscopy in articular cartilage and light microscopy and epiphyseal cartilage of swine from three days to 30 weeks of age. Thickness, cellularity and vascularity of both the epiphyseal and articular cartilage, decreased as the swine aged. Osteochondrotic changes included formation of "plugs" of cartilage indicating localized failure of ossification and separation and space formation in epiphyseal cartilage. Eosinophilic streaks and space formation in epiphyseal cartilage was observed in relation to epiphyseal separation. Electron microscopy showed a continuous fibrillar layer on the surface of the cartilage corresponding to the lamina splendens of light microscopy. This layer increased in the thickness and showed accumulation of amorphous material between the fibrils with aging. In the matrix, the orientation and distribution of the collagen fibers changed with growth and thicker fibers with clear sub banding were more common in older age groups. Also, necrotic cells, glycogen containing bodies and cellular debris were noticed in the matrix of normal cartilage in old animals. Chondrocytes in the younger cartilage showed accumulation of organelles responsible for protein synthesis; while Golgi bodies, vesicles, lysosomes, well developed foot processes and other inclusions were noticed in older cartilage. Cartilage erosions had a clumped and disrupted lamina splendens on the surface and electron lucent patches in the ground substances of the matrix and chondrocyte cytoplasm. Images Fig. 1. Fig. 2 and 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10 and 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 17. Fig. 18. PMID:7260732

  19. An Experimental Investigation of the Lymphatic System of the Teeth and Jaws

    PubMed Central

    MacGregor, Alexander

    1936-01-01

    are given, and the lines on which further experiments are being continued are indicated. Finally, the application of the results to the pathology of infection in this region, particularly paradontal disease, is given, and also their application to the phenomena of injection anæsthesia. ImagesFig. 18Fig. 19Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17 PMID:19990818

  20. Resonance formation in photon-photon collisions

    SciTech Connect

    Gidal, G.

    1988-08-01

    Recent experimental progress on resonance formation in photon-photon collisions is reviewed with particular emphasis on the pseudoscalar and tensor nonents and on the ..gamma gamma..* production of spin-one resonances. 37 refs., 17 figs., 5 tabs.

  1. Innervation of the human gastric wall.

    PubMed Central

    Kyösola, K; Rechardt, L; Veijola, L; Waris, T; Penttilä, O

    1980-01-01

    separated from the gastric glands (and the parietal cells, chief cells and endocrine cells of their epithelial lining) by a considerable gap so that it seems unlikely that the gastric glands, parietal cells, chief cells and endocrine cells receive a direct innervation in the sense of synaptic neurotransmission; the transmitter substance must diffuse across a wide gap. In contrast, the endocrine cells were in close contact with the parietal cells and chief cells, and occasional membrane specialization (desmosomes) reinforce the assumption that (also) direct local humoral interaction may be possible. In addition, a large number of mast cells was observed in the lamina propria, many lying as close to glandular cells (parietal cells, chief cells and endocrine cells) as were the nearest nerve terminals. Images Fig. 1 Fig. 2 Fig. 3 Figs. 4-6 Figs. 7(a) and 7(b) Figs. 8-9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Figs. 14-15 Fig. 16 Fig. 17 Figs. 18-19 Figs. 20-21 PMID:7216913

  2. The giant cardiac membrane patch method: stimulation of outward Na(+)-Ca2+ exchange current by MgATP.

    PubMed Central

    Collins, A; Somlyo, A V; Hilgemann, D W

    1992-01-01

    exchange current was 3 mM or greater. When decay was rapid, the steady-state dependence of exchange current on MgATP also had a Kd of 3 mM or greater. 8. Stimulation of Na(+)-Ca2+ exchange current by MgATP occurred in the absence of cytoplasmic calcium with 9 mM-EGTA. 9. The stimulatory effect of 2 mM-MgATP was not inhibited by up to 200 microM of the protein kinase inhibitor 1-(5-isoquinoline sulphonyl)-2-methylpiperazine (H7), or by peptide inhibitors of cyclic AMP-dependent protein kinase, protein kinase C and calcium-calmodulin-dependent protein kinase II.(ABSTRACT TRUNCATED AT 400 WORDS) Images Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 PMID:1335502

  3. Report of the subgroup on the top quark

    SciTech Connect

    Barnett, R.M.; Galtieri, A.B.; Hinchliffe, I.; Palounek, A. ); Wacker, K. ); Kauffman, R.; Trost, H.-J.; Yuan, C.-P. ); Klein, S. ); May, H. ); Partridge, R. ); Gunion, J.F. (California Univ., Da

    1990-01-01

    The top group studied discovery issues at the Tevatron as well as measurements to be made at LHC and SSC. Mass measurements, branching ratios, distributions and other issues were studied. 12 refs., 18 figs.

  4. Stabilized polyacrylic saccharide protein conjugates

    DOEpatents

    Callstrom, M.R.; Bednarski, M.D.; Gruber, P.R.

    1996-02-20

    This invention is directed to water soluble protein polymer conjugates which are stable in hostile environments. The conjugate comprises a protein which is linked to an acrylic polymer at multiple points through saccharide linker groups. 16 figs.

  5. Hydroxyalkyl phosphine compounds for use as diagnostic and therapeutic pharmaceuticals

    DOEpatents

    Katti, K.V.; Singh, P.R.; Reddy, V.S.; Katti, K.K.; Volkert, W.A.; Ketring, A.R.

    1999-03-02

    This research discloses a compound and method of making a compound for use as a diagnostic or therapeutic pharmaceutical comprises a functionalized hydroxyalkyl phosphine ligand and a metal combined with the ligand. 16 figs.

  6. Experimental determination of the effective Taylor dispersivity in a fracture

    SciTech Connect

    Gilardi, J.R.

    1984-06-01

    The applicability and accuracy of the approximation for Taylor Dispersion was experimentally determined for the diffusion of a chemical tracer in flow through a fracture. 12 refs., 16 figs., 10 tabs. (ACR)

  7. Improved assembly processes for the Quartz Digital Accelerometer cantilever

    SciTech Connect

    Romero, A.M.; Gebert, C.T.

    1990-07-01

    This report covers the development of improved assembly processes for the Quartz Digital Accelerometer cantilever. In this report we discuss improved single-assembly tooling, the development of tooling and processes for precision application of polyimide adhesive, the development of the wafer scale assembly procedure, and the application of eutectic bonding to cantilever assembly. 2 refs., 17 figs.

  8. Method for making an electrochemical cell

    DOEpatents

    Tuller, H.L.; Kramer, S.A.; Spears, M.A.; Pal, U.B.

    1996-04-23

    An electrochemical device is described including a solid electrolyte and solid electrode composed of materials having different chemical compositions and characterized by different electrical properties but having the same crystalline phase is provided. A method for fabricating an electrochemical device having a solid electrode and solid electrolyte characterized by the same crystalline phase is provided. 17 figs.

  9. Summary report of research accomplishments

    SciTech Connect

    Munir, Z.A.

    1992-04-01

    Recent work dealing with combustion synthesis of ceramics, metallics, and composites, is summarized. Research was carried out to investigate the mechanism of synthesis in simple (nitrides and silicides, particularly TiN), composite (TiC + NiAl), and solid solutions (TiNC). 17 figs.

  10. The fast simulation of electromagnetic and hadronic showers

    SciTech Connect

    Grindhammer, G.; Rudowicz, M.; Peters, S.; Max-Planck-Institut fuer Physik und Astrophysik, Muenchen . Werner-Heisenberg-Inst. fuer Physik)

    1989-10-01

    A program for the fast simulation of electromagnetic and hadronic showers using parameterizations for the longitudinal and lateral profile is described. The fluctuations and correlations of the parameters are taken into account in a consistent way. Comparisons with data over a wide energy range are made. 15 refs., 17 figs.

  11. Superstring spectroscopy

    SciTech Connect

    Peskin, M.E.

    1986-12-01

    The basic elements of string theory are presented after a brief review of the main properties of string theories, particularly the supersymmetric version. Lessons are provided on the basic quantized string, zero-point energy, the bosonic string, compactification on a torus, the superstring, the heterotic string, field compactification on an orbifold, and string compactification on an orbifold. 35 refs., 17 figs. (LEW)

  12. Smart, passive sun facing surfaces

    DOEpatents

    Hively, L.M.

    1996-04-30

    An article adapted for selectively utilizing solar radiation comprises an absorptive surface and a reflective surface, the absorptive surface and the reflective surface oriented to absorb solar radiation when the sun is in a relatively low position, and to reflect solar radiation when the sun is in a relatively high position. 17 figs.

  13. Commercialization of coal to liquids technology

    SciTech Connect

    2007-07-01

    After an overview of the coal market, technologies for producing liquids from coal are outlined. Commercialisation of coal-to-liquid fuels, the economics of coal-to-liquids development and the role of the government are discussed. Profiles of 8 key players and the profiles of 14 projects are finally given. 17 figs., 8 tabs.

  14. Sealing apparatus for airfoils of gas turbine engines

    DOEpatents

    Jones, R.B.

    1998-05-19

    An improved airfoil tip sealing apparatus is disclosed wherein brush seals are attached to airfoil tips with the distal ends of the brush seal fibers sealingly contacting opposing wall surfaces. Embodiments for variable vanes, stators and both cooled and uncooled turbine blade applications are disclosed. 17 figs.

  15. Acetylenic carbon allotrope

    DOEpatents

    Lagow, R.J.

    1998-02-10

    A fourth allotrope of carbon, an acetylenic carbon allotrope, is described. The acetylenic carbon allotropes of the present invention are more soluble than the other known carbon allotropes in many common organic solvents and possesses other desirable characteristics, e.g. high electron density, ability to burn cleanly, and electrical conductive properties. Many uses for this fourth allotrope are described herein. 17 figs.

  16. Multiple input electrode gap controller

    DOEpatents

    Hysinger, C.L.; Beaman, J.J.; Melgaard, D.K.; Williamson, R.L.

    1999-07-27

    A method and apparatus for controlling vacuum arc remelting (VAR) furnaces by estimation of electrode gap based on a plurality of secondary estimates derived from furnace outputs. The estimation is preferably performed by Kalman filter. Adaptive gain techniques may be employed, as well as detection of process anomalies such as glows. 17 figs.

  17. Electrophoretic detection and separation of mutant DNA using replaceable polymer matrices

    DOEpatents

    Karger, B.L.; Thilly, W.G.; Foret, F.; Khrapko, K.; Koehavong, P.; Cohen, A.S.; Giese, R.W.

    1997-05-27

    The disclosure relates to a method for resolving double-stranded DNA species differing by at least one base pair. Each of the species is characterized by an iso-melting domain with a unique melting temperature contiguous with a melting domain of higher thermal stability. 18 figs.

  18. Charging belt noise in a Van de Graaff accelerator

    SciTech Connect

    Trainor, T.A.

    1988-01-01

    With the aid of a Fast Fourier Transformer (FFT) spectrum analyzer it has been possible to decompose Van de Graaff terminal voltage noise into components that can be related to various properties of the charging belt. One consequence has been the elimination of the fundamental belt frequency component by a novel belt charge transfer device. 18 figs.

  19. Radiological aspects of the SSRL 3 GeV injector

    SciTech Connect

    Ipe, N.

    1991-09-01

    This document describes the shielding of the injector, results of radiation measurements, the personnel protection system, the beam containment system, the area monitoring, administrative controls and procedures, operator training and personnel dosimetry. In addition, other radiological aspects of the injector such as muons, air activation, toxic gases, induced activity and skyshine are discussed. 79 refs., 18 figs., 13 tabs.

  20. RF digital-to-analog converter

    DOEpatents

    Conway, P.H.; Yu, D.U.L.

    1995-02-28

    A digital-to-analog converter is disclosed for producing an RF output signal proportional to a digital input word of N bits from an RF reference input, N being an integer greater or equal to 2. The converter comprises a plurality of power splitters, power combiners and a plurality of mixers or RF switches connected in a predetermined configuration. 18 figs.

  1. Hadron production at PEP/PETRA

    SciTech Connect

    Yamamoto, H.

    1985-12-01

    Recent results on hadron production in e/sup +/e/sup -/ annihilation at PEP and PETRA are summarized. The topics included are: (1) inclusive hadron production, (2) gluon vs quark jet, (3) analysis of 3 jet events and (4) p - anti p correlations. Experimental data are compared with predictions of several models to reveal underlying physics. 47 refs., 18 figs.

  2. Detection of counterfeit currency

    DOEpatents

    Burns, D.A.

    1998-05-26

    A method is disclosed of detecting counterfeit currency by contacting the currency to be tested with near infrared beams in the spectrum below 1,250 nanometers, measuring reflectance of the near infrared beams and comparing the reflectance values with those from genuine currency. 18 figs.

  3. Method and apparatus for detecting flaws in conductive material

    DOEpatents

    Hockey, R.L.; Riechers, D.M.

    1998-07-07

    The present invention uses a magnet in relative motion to a conductive material, and a coil that is stationary with respect to the magnet to measure perturbation or variation in the magnetic field in the presence of an inclusion. The magnet and coil sensor may be on the same side of the conductive material. 18 figs.

  4. Lanthanide Al-Ni base Ericsson cycle magnetic refrigerants

    DOEpatents

    Gschneidner, K.A. Jr.; Takeya, Hiroyuki

    1995-10-31

    A magnetic refrigerant for a magnetic refrigerator using the Ericsson thermodynamic cycle comprises DyAlNi and (Gd{sub 0.54}Er{sub 0.46})AlNi alloys having a relatively constant {Delta}Tmc over a wide temperature range. 16 figs.

  5. Oligonucleoside alkyl or arylphosphonate derivatives capable of crosslinking with or cleaving nucleic acids

    DOEpatents

    Miller, P.S.; Ts'o, P.O.P.

    1999-06-15

    A composition for inactivating a target nucleic acid which comprises an oligonucleoside alkyl or arylphosphonate analogue which is complementary to the sequence of the target nucleic acid is provided. It includes a functional group which reacts with the target nucleic acid to render the target nucleic acid inactive or nonfunctional. 16 figs.

  6. Highly oxidized superconductors

    DOEpatents

    Morris, D.E.

    1994-09-20

    Novel superconducting materials in the form of compounds, structures or phases are formed by performing otherwise known synthesis in a highly oxidizing atmosphere rather than that created by molecular oxygen at atmospheric pressure or below. This leads to the successful synthesis of novel superconducting compounds which are thermodynamically stable at the conditions under which they are formed. 16 figs.

  7. A summary of ground motion effects at SLAC (Stanford Linear Accelerator Center) resulting from the Oct 17th 1989 earthquake

    SciTech Connect

    Ruland, R.E.

    1990-08-01

    Ground motions resulting from the October 17th 1989 (Loma Prieta) earthquake are described and can be correlated with some geologic features of the SLAC site. Recent deformations of the linac are also related to slow motions observed over the past 20 years. Measured characteristics of the earthquake are listed. Some effects on machine components and detectors are noted. 18 refs., 16 figs.

  8. Method of producing highly oxidized superconductors containing barium, copper, and a third metal

    DOEpatents

    Morris, D.E.

    1996-02-20

    Novel superconducting materials in the form of compounds, structures or phases are formed by performing otherwise known syntheses in a highly oxidizing atmosphere rather than that created by molecular oxygen at atmospheric pressure or below. This leads to the successful synthesis of novel superconducting compounds which are thermodynamically stable at the conditions under which they are formed. 16 figs.

  9. Lightning: Understanding it and protecting systems from its effects

    SciTech Connect

    Hasbrouck, R.T.

    1989-04-10

    This tutorial will raise the reader's level of lightning consciousness by providing an overview of the atmospheric electrification process and by discussing the development and characteristics of a lightning discharge. Next, techniques and instrumentation for lightning threat warning, detection and tracking will be presented. Finally, the principles of protection will be discussed, along with several methods for testing that protection. 15 refs., 16 figs.

  10. Digit switch evaluations and capillary IPA (isopropyl alcohol) study

    SciTech Connect

    Mizik, P.M.; Kibalo, E.F.

    1990-12-01

    Capillary flow of isopropyl alcohol under the wire insulation of an eleven-wire cable dissolved trapped flux from the pretinning and soldering operations and caused it to deposit on the circuit board inside a digit switch. Conformal coatings were successful in sealing the wire insulation gap to prevent solvent flow. 16 figs., 2 tabs.

  11. Method for replicating an array of nucleic acid probes

    DOEpatents

    Cantor, C.R.; Przetakiewicz, M.; Smith, C.L.; Sano, T.

    1998-08-18

    The invention relates to the replication of probe arrays and methods for replicating arrays of probes which are useful for the large scale manufacture of diagnostic aids used to screen biological samples for specific target sequences. Arrays created using PCR technology may comprise probes with 5{prime}- and/or 3{prime}-overhangs. 16 figs.

  12. High temperature alkali corrosion of dense SiC and Si{sub 3}N{sub 4} coated with CMZP and Mg-doped Al{sub 2}TiO{sub 5} in coal gas. Quarterly progress report No. 7, January 1, 1996--March 31, 1996

    SciTech Connect

    Yang, Shaokai; Brown, J.J.

    1996-03-31

    Objective is to apply CMZP and Mg-Al{sub 2}TiO{sub 5} as coatings to SiC to improve corrosion resistance under coal combustion atmospheres as well as to improve high temperature mechanical properties. The research will also study the mechanism of coal combustion corrosion of SiC at 1000-1400 C. 16 figs, 8 tabs.

  13. Deep inelastic scaling in nuclear and particle physics

    SciTech Connect

    West, G.B.

    1988-01-01

    These lectures are intended to be a pedagogical introduction to some of the ideas and concepts concerning scaling phenomena which arise in nuclear and particle physics. Topics discussed are: classical scaling and dimensional analysis; non-relativistic treatment; dynamics and scaling; y-scaling; and relativistic treatment (QCD). 22 refs., 16 figs. (LSP)

  14. Electric sales and revenue 1996

    SciTech Connect

    1997-12-01

    Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the US. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1996. 16 figs., 20 tabs.

  15. Cellulose binding domain proteins

    DOEpatents

    Shoseyov, O.; Shpiegl, I.; Goldstein, M.; Doi, R.

    1998-11-17

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  16. Cellulose binding domain fusion proteins

    DOEpatents

    Shoseyov, O.; Yosef, K.; Shpiegl, I.; Goldstein, M.A.; Doi, R.H.

    1998-02-17

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  17. Assessment of speciation techniques including the application of photoacoustic spectroscopy

    SciTech Connect

    Bucher, J.; Gehmecker, H.; Edelstein, N.

    1985-08-01

    This document describes laboratory experiments that compare chromatographic and spectroscopic methods for rapidly characterizing ionic species in detail. These techniques were tested on various radioactive ion systems to develop a rapid, accurate approach to site characterization for use with Remedial Action Programs. Promising techniques were evaluated. 9 refs., 16 figs., 2 tabs.

  18. On the HEMP (high-altitude electromagnetic pulse) response of protective relays

    SciTech Connect

    Thomas, D.E.; Wiggins, C.M.; Barnes, P.R.; Oak Ridge National Lab., TN )

    1990-01-01

    An assessment of the susceptibility of protective relays to the transients produced by high-altitude electromagnetic pulse (HEMP) events is presented in this paper. Several mechanisms responsible for coupling of HEMP to relay terminals are examined. The predicted relay responses to HEMP events are compared to measured data on a solid state based relay's impulse. 11 refs., 16 figs.

  19. Model assessment of protective barrier designs: Part 2

    SciTech Connect

    Fayer, M.J.

    1987-11-01

    Protective barriers are being considered for use at the Hanford Site to enhance the isolation of radioactive wastes from water, plant, and animal intrusion. This study assesses the effectiveness of protective barriers for isolation of wastes from water. In this report, barrier designs are reviewed and several barrier modeling assumptions are tested. 20 refs., 16 figs., 6 tabs.

  20. Polymer surface treatment with particle beams

    DOEpatents

    Stinnett, R.W.; VanDevender, J.P.

    1999-05-04

    A polymer surface and near surface treatment process produced by irradiation with high energy particle beams is disclosed. The process is preferably implemented with pulsed ion beams. The process alters the chemical and mechanical properties of the polymer surface in a manner useful for a wide range of commercial applications. 16 figs.

  1. Geothermal energy program summary

    SciTech Connect

    Not Available

    1990-01-01

    This document reviews Geothermal Energy Technology and the steps necessary to place it into service. Specific topics covered are: four types of geothermal resources; putting the resource to work; power generation; FY 1989 accomplishments; hard rock penetration; conversion technology; and geopressured brine research. 16 figs. (FSD)

  2. Methods of use of cellulose binding domain proteins

    DOEpatents

    Shoseyov, O.; Shpiegl, I.; Goldstein, M.A.; Doi, R.H.

    1997-09-23

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  3. Kits and methods of detection using cellulose binding domain fusion proteins

    DOEpatents

    Shoseyov, O.; Yosef, K.

    1998-04-14

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  4. Characterization of reference Umtanum and Cohassett basalt

    SciTech Connect

    Allen, C.C.; Johnston, R.G.; Strope, M.B.

    1985-02-01

    The Basalt Waste Isolation Project (BWIP) Materials Testing Group (MTG) provides large quantities of reference basalt for testing waste package materials under repository conditions, site sorption characteristics and other experimental purposes. This document describes the reference rock materials currently used in testing, namely entablature and colonnade basalt from the Umtanum and Cohassett flows. The data include sampling locations, bulk chemical composition, modal percentages of major phases, and the chemical and mineralogical compositions of these phases. 8 refs., 17 figs., 15 tabs.

  5. Organosiloxane-grafted natural polymer coatings

    DOEpatents

    Sugama, Toshifumi

    1998-12-01

    A new family of polysaccharide graft polymers are provided as corrosion resistant coatings having antimicrobial properties which are useful on light metals such as aluminum, magnesium, zinc, steel and their alloys. Methods of making the polysaccharide graft polymers are also included. The methods of making the polysaccharide graft polymers involve reacting a polysaccharide source with an antimicrobial agent under conditions of hydrolysis-condensation. 17 figs.

  6. An investigation of the mechanisms of calcination and sulfation in coal-water mixtures

    SciTech Connect

    Christofides, N.

    1990-09-21

    The purpose of this investigation is to study the mechanisms of sulfur capture when burning coal-water-limestone mixtures (CWLM) in fluidized beds. Special care is taken to make comparisons with to dry coal and sorbent under comparable experimental conditions. A series of experiments were performed in an eight-inch diameter bubbling fluidized bed combustor to address this problem. 33 refs., 17 figs., 5 tabs.

  7. Yakima/Klickitat Natural Production and Enhancement Program : Annual Report FY 1989.

    SciTech Connect

    Fast, David E.; Hubble, Joel D.; Schribner, Thomas B.

    1989-12-01

    The purpose of this study is to develop and implement a detailed and comprehensive program for monitoring status and productivity of salmon and steelhead in the Yakima/Klickitat Basins. The procedures will cover all phases in the data gathering process from field work to computer retrievable data files. Sampling locations, sample size, sampling frequencies and methods will be described whenever specific information is available. 9 refs., 18 figs., 8 tabs.

  8. Central ignition scenarios for TFTR

    SciTech Connect

    Zweben, S.J.; Redi, M.H.; Bateman, G.

    1986-03-01

    The possibility of obtaining ignition in TFTR by means of very centrally peaked density profiles is examined. It is shown that local central alpha heating can be made to exceed local central energy losses (''central ignition'') under global conditions for which Q greater than or equal to 1. Time dependent 1-D transport simulations show that the normal global ignition requirements are substantially relaxed for plasmas with peaked density profiles. 18 refs., 18 figs.

  9. Willapa Bay: A historical perspective and a rationale for research

    SciTech Connect

    Hedgpeth, J.W. , Santa Rosa, CA ); Obrebski, S. )

    1981-04-01

    This report provides a historical perspective of a Pacific coast estuarine system -- Willapa Bay. The intent of the report is to stimulate estuarine research in an area which is relatively undisturbed. Of particular interest is the importance or value of marshes, tideflats, and eelgrass beds to estuarine fisheries and waterfowl. The research findings as determined for Willapa Bay could be applied to other Pacific Northwest estuaries for coastal problems and decisionmaking. 61 refs., 18 figs., 5 tabs.

  10. Extended gauge sectors at future colliders: Report of the New Gauge Boson Subgroup

    SciTech Connect

    Rizzo, T.G.

    1996-12-01

    The author summarizes the results of the New Gauge Boson Subgroup on the physics of extended gauge sectors at future colliders as presented at the 1996 Snowmass workshop. He discusses the direct and indirect search reaches for new gauge bosons at both hadron and lepton colliders as well as the ability of such machines to extract detailed information on the couplings of these particles to the fermions and gauge bosons of the Standard Model. 41 refs., 18 figs., 5 tabs.

  11. Index of granitic rock masses in the state of Nevada; A compilation of data on 205 areas of exposed granitic rock masses in Nevada

    SciTech Connect

    1988-12-31

    The compilation of 205 areas of exposed granitic rock in Nevada was undertaken for the US Department of Energy. The purpose was to obtain data for evaluating granitic rock masses as potential underground nuclear waste repositories. Information, compiled by county for areas of granitic rock exposure, includes general location, coordinates, land classification, areal extent, accessibility, composition, age, rocks intruded, aeromagnetic expression, mining activity, and selected references. 49 refs., 18 figs., 3 tabs.

  12. Hanford internal dosimetry program manual

    SciTech Connect

    Carbaugh, E.H.; Sula, M.J.; Bihl, D.E.; Aldridge, T.L.

    1989-10-01

    This document describes the Hanford Internal Dosimetry program. Program Services include administrating the bioassay monitoring program, evaluating and documenting assessments of internal exposure and dose, ensuring that analytical laboratories conform to requirements, selecting and applying appropriate models and procedures for evaluating internal radionuclide deposition and the resulting dose, and technically guiding and supporting Hanford contractors in matters regarding internal dosimetry. 13 refs., 16 figs., 42 tabs.

  13. Pulsed source ion implantation apparatus and method

    DOEpatents

    Leung, K.N.

    1996-09-24

    A new pulsed plasma-immersion ion-implantation apparatus that implants ions in large irregularly shaped objects to controllable depth without overheating the target, minimizing voltage breakdown, and using a constant electrical bias applied to the target. Instead of pulsing the voltage applied to the target, the plasma source, for example a tungsten filament or a RF antenna, is pulsed. Both electrically conducting and insulating targets can be implanted. 16 figs.

  14. Shape memory alloy thaw sensors

    DOEpatents

    Shahinpoor, M.; Martinez, D.R.

    1998-04-07

    A sensor permanently indicates that it has been exposed to temperatures exceeding a critical temperature for a predetermined time period. An element of the sensor made from shape memory alloy changes shape when exposed, even temporarily, to temperatures above the austenitic temperature of the shape memory alloy. The shape change of the SMA element causes the sensor to change between two readily distinguishable states. 16 figs.

  15. The development of in vitro mutagenicity testing systems using T-lymphocytes. Research progress report, November 1, 1989--April 30, 1992

    SciTech Connect

    Albertini, R.J.

    1992-05-01

    This work has focused on the development of in vitro T-cell mutation assays. Conditions have been defined to measure the in vitro induction of mutations at the hypoxanthine-guanine phosphoribosyl transferase (hprt) locus in human T-lymphocytes. This assay is a parallel to our in vivo hprt assay, in that the same cells are utilized. However, the in vitro assay allows for carefully controlled dose response studies. 21 refs., 16 figs., 13 tabs.

  16. Quality function deployment as a mechanism for process characterization and control

    SciTech Connect

    Gillespie, L.K.

    1990-07-01

    This study was initiated to determine how well quality function deployment (QFD) was suited for process characterization. The process chosen on which to test QFD was the mechanical process of flat lapping (flat sanding) metal parts to a specified flatness or finish. This is the first use of QFD at this facility. It is the first example the authors have seen of its use for generic process characterization. It is normally used to define product needs. 13 refs., 16 figs., 5 tabs.

  17. Tracking simulation and wire chamber requirements for the SSC

    SciTech Connect

    Hanson, G.G.; Niczyporuk, B.B.; Palounek, A.P.T.

    1988-11-01

    Limitations placed on wire chambers by radiation damage and rate requirements in the SSC environment are reviewed. Possible conceptual designs for wire chamber tracking systems which meet these requirements are discussed. Computer simulation studies of tracking in such systems are presented. Simulations of events from interesting physics at the SSC, including hits from minimum bias background events, are examined. Results of some preliminary pattern recognition studies are given. 16 refs., 16 figs., 2 tabs.

  18. Load cell

    DOEpatents

    Spletzer, B.L.

    1998-12-15

    A load cell combines the outputs of a plurality of strain gauges to measure components of an applied load. Combination of strain gauge outputs allows measurement of any of six load components without requiring complex machining or mechanical linkages to isolate load components. An example six axis load cell produces six independent analog outputs, each directly proportional to one of the six general load components. 16 figs.

  19. Development of a methodology for defining whole-building energy design targets for commercial buildings: Phase 2, Development Concept Stage Report

    SciTech Connect

    McKay, H.N. ); Deringer, J.J. ); Jones, J.W. ); Hall, J.D. )

    1990-09-01

    This report documents eight tasks performed as part of the Whole-Building Energy Design Targets project, in which detailed conceptual approaches were produced for each element of the proposed Targets model. The eight task reports together describe the important modules proposed for inclusion in the Targets model: input module, energy module, characteristic development moduel, building cost module, analysis control module, energy cost module, search routines module, and economic analysis module. 16 refs., 16 figs., 5 tabs.

  20. The development of in vitro mutagenicity testing systems using T-lymphocytes

    SciTech Connect

    Albertini, R.J.

    1992-05-01

    This work has focused on the development of in vitro T-cell mutation assays. Conditions have been defined to measure the in vitro induction of mutations at the hypoxanthine-guanine phosphoribosyl transferase (hprt) locus in human T-lymphocytes. This assay is a parallel to our in vivo hprt assay, in that the same cells are utilized. However, the in vitro assay allows for carefully controlled dose response studies. 21 refs., 16 figs., 13 tabs.

  1. Environmental assessment related to the operation of Argonne National Laboratory, Argonne, Illinois

    SciTech Connect

    Not Available

    1982-08-01

    In order to evaluate the environmental impacts of Argonne National Laboratory (ANL) operations, this assessment includes a descriptive section which is intended to provide sufficient detail to allow the various impacts to be viewed in proper perspective. In particular, details are provided on site characteristics, current programs, characterization of the existing site environment, and in-place environmental monitoring programs. In addition, specific facilities and operations that could conceivably impact the environment are described at length. 77 refs., 16 figs., 47 tabs.

  2. Chemical enhancement of surface deposition

    DOEpatents

    Patch, K.D.; Morgan, D.T.

    1997-07-29

    A method and apparatus are disclosed for increasing the deposition of ions onto a surface, such as the adsorption of uranium ions on the detecting surface of a radionuclide detector. The method includes the step of exposing the surface to a complexing agent, such as a phosphate ion solution, which has an affinity for the dissolved species to be deposited on the surface. This provides, for example, enhanced sensitivity of the radionuclide detector. 16 figs.

  3. Pruning apparatus and method

    DOEpatents

    Dellinger, R.D.

    1997-12-09

    The present invention is an automated pruning apparatus that requires little or no follow-up hand pruning and requires no sensors to avoid supportive trunks or posts. The present invention uses at least one pair of flat, close angled toothed, counter rotating blades. Woody branches are directed to the counter rotating blades first with a lifting arm and secondly by a quilled drum. 16 figs.

  4. Security system signal supervision

    SciTech Connect

    Chritton, M.R. ); Matter, J.C. )

    1991-09-01

    This purpose of this NUREG is to present technical information that should be useful to NRC licensees for understanding and applying line supervision techniques to security communication links. A review of security communication links is followed by detailed discussions of link physical protection and DC/AC static supervision and dynamic supervision techniques. Material is also presented on security for atmospheric transmission and video line supervision. A glossary of security communication line supervision terms is appended. 16 figs.

  5. Results from FNAL E745 on neutrino-nucleus interactions (EMC effect and hadron formation)

    SciTech Connect

    Kitagaki, T. . Bubble Chamber Physics Lab.)

    1989-01-01

    The dark tracks (stubs) in high energy neutrino-nucleus interactions in the Tohoku High Resolution Freon Bubble Chamber are investigated. Classifying events into groups by using the dark tracks, correlations between the dark track production and neutrino interactions are studied. Events without dark tracks comprise a reasonable sample of events which occurred on quasi-free nucleons inside nucleus. By comparing the groups using the no dark track group as a comparison sample instead of neutrino-deuterium events, the EMC effect and hadron formation are investigated. This method provides new results which differ somewhat from the conventional data for the EMC effect and formation-rescattering. 10 refs., 17 figs.

  6. Thermal tests of MC3811 rigid/flex printed wiring boards

    SciTech Connect

    Gentry, F.L.

    1990-10-01

    Rigid/flex multilayer printed wiring boards are more sensitive to thermal environmental changes than conventional printed wiring boards. This is manifested because of a composition of dissimilar materials used within the construction of this type of product. During fabrication and assembly, stresses can develop within the plated-through holes from differences in thermal properties of the rigid and flexible materials, primarily thermal coefficient of expansion. Thermal shock and thermal stress tests and rework simulation as defined in MIL-P-50884 have been performed in this study as indicators of processing quality to detect faults and to verify improvements in board reliability. 3 refs., 17 figs., 3 tabs.

  7. (Laboratory for Energy-Related Health Research) annual report, fiscal year 1988

    SciTech Connect

    Abell, D.L.

    1989-09-01

    The major goal of this study on the toxicity of {sup 90}Sr and {sup 226}Ra is to provide information on long-term consequences expected to occur in people from chronic exposure to {alpha}- and {beta}-emitting bone-seeking radionuclides. To meet this goal, we are evaluating the biologic effects of the two radionuclides in the beagle. Similarities between dogs and people provide a valuable base for the scaling of potential hazards from radionuclide contamination from canine to human populations. 36 refs., 17 figs., 11 tabs.

  8. Crystalline mesoporous zirconia catalysts having stable tetragonal pore wall structure

    DOEpatents

    Sachtler, W.M.H.; Huang, Y.Y.

    1998-07-28

    Methods are disclosed for the preparation of new sulfated mesoporous zirconia materials/catalysts with crystalline pore walls of predominantly tetragonal crystal structure, characterized by nitrogen physical sorption measurement, X-ray diffraction, transmission electron microscopy and catalytic tests using n-butane isomerization to iso-butane and alkylation of 1-naphthol with 4-tert-butylstyrene as probe reactions. Sulfate deposition is preferred for the transformation of a mesoporous precursor with amorphous pore walls into a material with crystalline pore walls maintaining the mesoporous characteristics. 17 figs.

  9. Phase 1 report on sensor technology, data fusion and data interpretation for site characterization

    SciTech Connect

    Beckerman, M.

    1991-10-01

    In this report we discuss sensor technology, data fusion and data interpretation approaches of possible maximal usefulness for subsurface imaging and characterization of land-fill waste sites. Two sensor technologies, terrain conductivity using electromagnetic induction and ground penetrating radar, are described and the literature on the subject is reviewed. We identify the maximum entropy stochastic method as one providing a rigorously justifiable framework for fusing the sensor data, briefly summarize work done by us in this area, and examine some of the outstanding issues with regard to data fusion and interpretation. 25 refs., 17 figs.

  10. An analysis of increasing the size of the strategic petroleum reserve to one billion barrels

    SciTech Connect

    Not Available

    1990-01-01

    The Department of Energy's Office of Energy Emergency Policy and Evaluation requested that the Energy Information Administration complete an analysis of the proposed expansion in the Strategic Petroleum Reserve (SPR) from its currently planned size of 750 million barrels to 1000 million barrels. Because the SPR contains only 580 million barrels at this point in time, the benefits and costs of increasing the SPR from 600 to 750 million barrels were also estimated. This report documents the assumptions, methodology, and results of the analysis. 17 figs., 15 tabs.

  11. The principles and construction of linear colliders

    SciTech Connect

    Rees, J.

    1986-09-01

    The problems posed to the designers and builders of high-energy linear colliders are discussed. Scaling laws of linear colliders are considered. The problem of attainment of small interaction areas is addressed. The physics of damping rings, which are designed to condense beam bunches in phase space, is discussed. The effect of wake fields on a particle bunch in a linac, particularly the conventional disk-loaded microwave linac structures, are discussed, as well as ways of dealing with those effects. Finally, the SLAC Linear Collider is described. 18 refs., 17 figs. (LEW)

  12. Experimental studies of actinides in molten salts

    SciTech Connect

    Reavis, J.G.

    1985-06-01

    This review stresses techniques used in studies of molten salts containing multigram amounts of actinides exhibiting intense alpha activity but little or no penetrating gamma radiation. The preponderance of studies have used halides because oxygen-containing actinide compounds (other than oxides) are generally unstable at high temperatures. Topics discussed here include special enclosures, materials problems, preparation and purification of actinide elements and compounds, and measurements of various properties of the molten volts. Property measurements discussed are phase relationships, vapor pressure, density, viscosity, absorption spectra, electromotive force, and conductance. 188 refs., 17 figs., 6 tabs.

  13. Magnetic force microscopy method and apparatus to detect and image currents in integrated circuits

    DOEpatents

    Campbell, A.N.; Anderson, R.E.; Cole, E.I. Jr.

    1995-11-07

    A magnetic force microscopy method and improved magnetic tip for detecting and quantifying internal magnetic fields resulting from current of integrated circuits are disclosed. Detection of the current is used for failure analysis, design verification, and model validation. The interaction of the current on the integrated chip with a magnetic field can be detected using a cantilevered magnetic tip. Enhanced sensitivity for both ac and dc current and voltage detection is achieved with voltage by an ac coupling or a heterodyne technique. The techniques can be used to extract information from analog circuits. 17 figs.

  14. Geology of the Southeast Durham and Southwest Durham 7. 5-minute Quadrangles, North Carolina

    SciTech Connect

    Hoffman, C.W.; Gallagher, P.E.

    1989-01-01

    The Southeast Durham and Southwest Durham 7.5-minute Quadrangles include a 26 kilometer transect of the Durham Triassic basin from the Jonesboro fault on the southeastern side of this half-graben structure to a bounding unconformity on the northwestern side. The basin is filled with non-marine, primarily fluvial, clastic deposits of the Late Triassic Chatham Group. The Chatham Group rocks are intruded by Early Jurassic diabase as dikes and sheets. Bordering rocks are pre-Mesozoic intrusive, metavolcanic and metasedimentary rocks of the Carolina slate belt. This paper discusses the geology of the Southeast Durham and Southwest Durham Quadrangles. 37 refs., 17 figs.

  15. Nuclear multifragmentation: Antiprotons versus photons and heavy ions

    SciTech Connect

    Cugnon, J.

    1994-09-01

    Nuclear multifragmentation is the phenomenon by which a nucleus breaks into many pieces of intermediate size. It occurs in the excitation-energy regime, between the spallation + evaporation regime and the explosive fragmentation regime. The various models of multifragmentation are briefly reviewed and the possibility of critical behavior in the multifragmentation process is underlined. Unanswered problems are stated. It is shown, by model calculations, that antiproton annihilation is, in many respects, better suited than proton-nucleus and heavy-ion collisions for studying multifragmentation and, in other respects, complementary to these other tools. 36 refs., 17 figs., 1 tab.

  16. Parallel pulse processing and data acquisition for high speed, low error flow cytometry

    DOEpatents

    Engh, G.J. van den; Stokdijk, W.

    1992-09-22

    A digitally synchronized parallel pulse processing and data acquisition system for a flow cytometer has multiple parallel input channels with independent pulse digitization and FIFO storage buffer. A trigger circuit controls the pulse digitization on all channels. After an event has been stored in each FIFO, a bus controller moves the oldest entry from each FIFO buffer onto a common data bus. The trigger circuit generates an ID number for each FIFO entry, which is checked by an error detection circuit. The system has high speed and low error rate. 17 figs.

  17. Rf system considerations for a large hadron collider

    SciTech Connect

    Raka, E.

    1988-01-01

    In this paper, we shall discuss how we arrive at a particular choice of voltage and frequency; the type of acceleration structure that would be suitable for obtaining the required voltage and resonant impedance; static beam loading including a simplified beam stability criterion involving the beam current and total rf system shunt impedance; the basic principle of rf phase and frequency control loops; and the effect of rf noise and its interaction with these loops. Finally, we shall consider the need for and design of rf systems to damp independently coherent oscillations of individual bunches or groups of bunches. 30 refs., 17 figs., 2 tabs.

  18. Oak Ridge Reservation Site Management Plan for the Environmental Restoration Program

    SciTech Connect

    Not Available

    1991-09-01

    This site management for the Environmental Restoration (ER) Program implements the Oak Ridge Reservation (ORR) Federal Facility Agreement (FFA) (EPA 1990), also known as an Interagency Agreement (IAG), hereafter referred to as the Agreement.'' The Department of Energy (DOE), the US Environmental Protection Agency (EPA), and the Tennessee Department of Environment and Conservation (TDEC), hereafter known as the Parties,'' entered into this Agreement for the purpose of coordinating remediation activities undertaken on the ORR to comply with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) as amended by the Superfund Amendments, the Resource Conservation and Recovery Act (RCRA), and the National Environmental Policy Act (NEPA). 7 refs., 17 figs.

  19. Hydrogeologic testing plan for Deep Hydronest Test Wells, Deaf Smith County site, Texas

    SciTech Connect

    Not Available

    1987-12-01

    This report discusses methods of hydraulic testing which are recommended for use in the Deep Hydronest Test Wells at the proposed high level nuclear waste repository site in Deaf Smith County, Texas. The deep hydronest wells are intended to provide geologic, geophysical and hydrologic information on the interval from the Upper San Andres Formation to the base of the Pennsylvanian system at the site. Following the period of drilling and testing, the wells will be converted into permanent monitoring installations through which fluid pressures and water quality can be monitored at various depths in the section. 19 refs., 17 figs., 2 tabs.

  20. Deconvolution/identification techniques for 1-D transient signals

    SciTech Connect

    Goodman, D.M.

    1990-10-01

    This paper discusses a variety of nonparametric deconvolution and identification techniques that we have developed for application to 1-D transient signal problems. These methods are time-domain techniques that use direct methods for matrix inversion. Therefore, they are not appropriate for large data'' problems. These techniques involve various regularization methods and permit the use of certain kinds of a priori information in estimating the unknown. These techniques have been implemented in a package using standard FORTRAN that should make the package readily transportable to most computers. This paper is also meant to be an instruction manual for the package. 25 refs., 17 figs., 1 tab.

  1. Method for formation of subsurface barriers using viscous colloids

    DOEpatents

    Apps, J.A.; Persoff, P.; Moridis, G.; Pruess, K.

    1998-11-17

    A method is described for formation of subsurface barriers using viscous liquids where a viscous liquid solidifies at a controlled rate after injection into soil and forms impermeable isolation of the material enclosed within the subsurface barriers. The viscous liquid is selected from the group consisting of polybutenes, polysiloxanes, colloidal silica and modified colloidal silica of which solidification is controlled by gelling, cooling or cross-linking. Solidification timing is controlled by dilution, addition of brines, coating with alumina, stabilization with various agents and by temperature. 17 figs.

  2. Dual stage active magnetic regenerator and method

    DOEpatents

    Pecharsky, V.K.; Gschneidner, K.A. Jr.

    1999-03-30

    A dual stage active magnetic regenerator refrigerator as well as method using the Joule-Brayton thermodynamic cycle includes a high temperature stage refrigerant comprising DyAl{sub 2} or (Dy{sub 1{minus}x}Er{sub x})Al{sub 2} where x is selected to be greater than 0 and less than about 0.3 in combination with a low temperature stage comprising (Dy{sub 1{minus}x}Er{sub x})Al{sub 2} where x is selected to be greater than about 0.5 and less than 1 to provide significantly improved refrigeration efficiency in the liquefaction of gaseous hydrogen. 17 figs.

  3. Raman scattering in crystals

    SciTech Connect

    Edwards, D.F.

    1988-09-30

    A tutorial presentation is given of Raman scattering in crystals. The physical concepts are emphasized rather than the detailed mathematical formalism. Starting with an introduction to the concepts of phonons and conservation laws, the effects of photon-phonon interactions are presented. This interaction concept is shown for a simple cubic crystal and is extended to a uniaxial crystal. The correlation table method is used for determining the number and symmetry of the Raman active modes. Finally, examples are given to illustrate the relative ease of using this group theoretical method and the predictions are compared with measured Raman spectra. 37 refs., 17 figs., 6 tabs.

  4. Dual cure photocatalyst systems

    SciTech Connect

    DeVoe, R.J.; Brown-Wensley, K.A.; Holmes, G.L.; Mathis, M.D.; McCormick, F.B.; Palazzotto, M.C.; Spurgeon, K.M. . Corporate Research Labs.)

    1990-01-01

    A family of dual cure photocatalyst systems is being developed to be used in the solventless processing of organic coatings. The photocatalyst systems consist of organometallic compounds often in combination with other agents. Upon photolysis, the photocatalyst system generates a Lewis acid and a free radical. The Lewis acid can initiate the polymerization of epoxies or the addition of isocyanates and polyols to form polyurethanes while the free radical can initiate the polymerization of acrylates. The performance of the various photocatalyst systems will be compared on the basis of the physical properties of the cured compositions they produce. 17 figs.

  5. Enhancement of wall jet transport properties

    DOEpatents

    Claunch, S.D.; Farrington, R.B.

    1997-02-04

    By enhancing the natural instabilities in the boundary layer and in the free shear layer of a wall jet, the boundary is minimized thereby increasing the transport of heat and mass. Enhancing the natural instabilities is accomplished by pulsing the flow of air that creates the wall jet. Such pulsing of the flow of air can be accomplished by sequentially occluding and opening a duct that confines and directs the flow of air, such as by rotating a disk on an axis transverse to the flow of air in the duct. 17 figs.

  6. ''SMAC'' - Sonic Mapping and Caliper research and development. Final report, Phase IB

    SciTech Connect

    Handy, L.E.

    1985-12-01

    The development of the Sonic Mapping and caliper (SMAC) Tools has been part of an ongoing effort by Hot Hole Instruments, Inc. of Los Alamos, New Mexico, to provide the geothermal, oil and gas drilling industries with improved and accurate tools for the inspection of the insides of boreholes and interiors of wells. Based on the successful completion of a proof of concept phase, referred to as Phase IA, Hot Hole Instruments, Inc. Undertook in Phase IB the design and testing of the SMAC Tool. Work was accomplished during the last half of 1984 and the first half of 1985. 17 figs.

  7. Scanning tip microwave near field microscope

    DOEpatents

    Xiang, X.D.; Schultz, P.G.; Wei, T.

    1998-10-13

    A microwave near field microscope has a novel microwave probe structure wherein the probing field of evanescent radiation is emitted from a sharpened metal tip instead of an aperture or gap. This sharpened tip, which is electrically and mechanically connected to a central electrode, extends through and beyond an aperture in an end wall of a microwave resonating device such as a microwave cavity resonator or a microwave stripline resonator. Since the field intensity at the tip increases as the tip sharpens, the total energy which is radiated from the tip and absorbed by the sample increases as the tip sharpens. The result is improved spatial resolution without sacrificing sensitivity. 17 figs.

  8. Characterization of nitrogen compound types in shale oils using /sup 1/H NMR and high resolution mass spectral analyses

    SciTech Connect

    Thompson, L.F.; Netzel, D.A.

    1984-12-01

    The /sup 1/H nuclear magnetic resonance (NMR) spectra were obtained for nitrogen compound-type fractions from a Geokinetics shale oil distillate and a Caribou intermediately refined oil obtained during catalytic hydroprocessing of the Geokinetics distillate. These fractions were generated using alumina and silica chromatography. The NMR spectra of the fractions were analyzed for hydrogen types and for individual compounds and the results compared with mass spectral data. The observed differences in resonance intensities in the /sup 1/H NMR spectra of the nitrogen fractions from the distillate and intermediately refined oil are also discussed in relationship to hydroprocessing. 17 refs., 17 figs., 5 tabs.

  9. Spray forming process for producing molds, dies and related tooling

    DOEpatents

    McHugh, K.M.; Key, J.F.

    1998-02-17

    A method is disclosed for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers. 17 figs.

  10. N Reactor core heatup sensitivity study for the 32-inch unit cell model

    SciTech Connect

    Martin, F.; Zimmerman, B.; Heard, F.

    1988-02-01

    A number of N Reactor core heatup studies have been performed using the TRUMP-BD computer code. These studies were performed to address questions concerning the dependency of results on potential variations in the material properties and/or modeling assumptions. This report described and documents a series of 31 TRUMP-BD runs that were performed to determine the sensitivity of calculated inner-fuel temperatures to a variety of TRUMP input parameters and also to a change in the node density in a high-temperature-gradient region. The results of this study are based on the 32-in. model. 18 refs., 17 figs., 2 tab.

  11. Investigation of protein binding of radiogallium. Progress report

    SciTech Connect

    Hoffer, P.B.

    1985-07-25

    The main objective of the contract is to study aspects of the localization of gallium-67 in tumor are reported and compared with a new tumor imaging agent, specifically radiolabeled monoclonal tumor antibody. Our studies have demonstrated that phosphate compounds used in bone imaging do not significantly influence gallium-67 localization, that the adenosine triphosphate cannot be used to enhance gallium-67 uptake in malignant tissue, and that gallium-67 has higher affinity than radiolabeled anti-p97 for melanoma, even in tumors which produce significant amounts of p97 antigen on their cell surface. 23 refs., 17 figs., 5 tabs.

  12. Status report on the tectonic fracture and breccia study in the Vantage area

    SciTech Connect

    Chamness, M.A.; Tolan, T.L.

    1983-09-01

    This is a status report on preliminary observations and interpretations which are subject to change with future work. An area near Vantage Washington is currently being examined in order to determine the nature and extent of tectonic breccias and fractures related to faulting and folding in a synclinal area. This report describes the status of that study as of August 1983. The study consists of three phases: geologic mapping, location and description of breccias, and comparison to borehole data. Work completed to date is primarily geologic mapping and preliminary work on the location of breccia zones. 27 refs., 18 figs.

  13. Dispersive effects of transverse magnet displacements in rolled arc achromats

    SciTech Connect

    Fieguth, T.; Kheifets, S.; Murray, J.J.

    1986-09-22

    The effect of transverse displacements of combined function magnets is investigated where the disperion in not matched due to roll. This dispersion function is perturbed by displacement of combined function magnets either singly or coherently. In the latter case the effect of a systematic (or DC) offset of magnets is examined. This type of error can occur due to systematics in the placement or the readout of Beam Position Monitors or equivalently by correcting the orbit of a beam of the wrong momentum with respect to the Arc magnet excitation. 5 refs., 18 figs.

  14. Light-induced voltage alteration for integrated circuit analysis

    DOEpatents

    Cole, E.I. Jr.; Soden, J.M.

    1995-07-04

    An apparatus and method are described for analyzing an integrated circuit (IC). The invention uses a focused light beam that is scanned over a surface of the IC to generate a light-induced voltage alteration (LIVA) signal for analysis of the IC. The LIVA signal may be used to generate an image of the IC showing the location of any defects in the IC; and it may be further used to image and control the logic states of the IC. The invention has uses for IC failure analysis, for the development of ICs, for production-line inspection of ICs, and for qualification of ICs. 18 figs.

  15. Effect of ion implantation on subsequent erosion and wear behavior of solids

    SciTech Connect

    McHargue, C.J.

    1985-01-01

    The removal of material from a solid surface by mechanical forces is influenced by material properties (hardness, fracture toughness, yield strength, surface free energy) as well as system parameters (force, velocity of loading, environment). Ion implantation can modify many of the material properties either by directly affecting the deformation characteristics or indirectly by affecting the chemical or phase composition at the surface. The various forms of wear and erosion are analyzed to determine the material and system parameters which control material removal. The effects of implantation on these critical parameters are noted and examples of changes in surface topography under various test conditions are discussed. 18 figs.

  16. Techniques for optically compressing light intensity ranges

    DOEpatents

    Rushford, M.C.

    1989-03-28

    A pin hole camera assembly for use in viewing an object having a relatively large light intensity range, for example a crucible containing molten uranium in an atomic vapor laser isotope separator (AVLIS) system is disclosed herein. The assembly includes means for optically compressing the light intensity range appearing at its input sufficient to make it receivable and decipherable by a standard video camera. A number of different means for compressing the intensity range are disclosed. These include the use of photogray glass, the use of a pair of interference filters, and the utilization of a new liquid crystal notch filter in combination with an interference filter. 18 figs.

  17. Block copolymer adhesion promoters via ring-opening metathesis polymerization

    DOEpatents

    Kent, M.S.; Saunders, R.

    1997-02-18

    Coupling agents are disclosed based on functionalized block copolymers for bonding thermoset polymers to solid materials. These are polymers which possess at least two types of functional groups, one which is able to attach to and react with solid surfaces, and another which can react with a thermoset resin, which are incorporated as pendant groups in monomers distributed in blocks (typically two) along the backbone of the chain. The block copolymers in this invention are synthesized by living ring-opening metathesis polymerization. 18 figs.

  18. Method and apparatus for generating low energy nuclear particles

    DOEpatents

    Powell, J.R.; Reich, M.; Ludewig, H.; Todosow, M.

    1999-02-09

    A particle accelerator generates an input particle beam having an initial energy level above a threshold for generating secondary nuclear particles. A thin target is rotated in the path of the input beam for undergoing nuclear reactions to generate the secondary particles and correspondingly decrease energy of the input beam to about the threshold. The target produces low energy secondary particles and is effectively cooled by radiation and conduction. A neutron scatterer and a neutron filter are also used for preferentially degrading the secondary particles into a lower energy range if desired. 18 figs.

  19. Nuclear spectroscopic studies. Progress report

    SciTech Connect

    Bingham, C.R.; Riedinger, L.L.; Sorensen, S.P.

    1996-01-16

    This report describes progress in the experimental nuclear physics program of the University of Tennessee, Knoxville. It presents findings related to properties of high-spin states, low-energy levels of nuclei far from stability, and high-energy heavy-ion physics, as well as a brief description of the Joint Institute of Heavy Ion Research (a collaboration between the University of Tennessee, Vanderbilt University, and Oak Ridge National Laboratory) and its activities (particularly those of the last few years), and a list of publications. 89 refs., 18 figs., 5 tabs.

  20. Research and Development Report, Fiscial Year 1989-1990.

    SciTech Connect

    United States. Bonneville Power Administration.

    1991-08-01

    Since the 1940s, the Bonneville Power Administrative (BPA), has sought to advance an efficient system to provide the Pacific Northwest region with safe, reliable, and cost-effective electrical power. Research and development (R D) activities support that mission. Each biennium, R D managers issue a digest report of the various programs and activities in each of the technological arenas. The report covers a few projects, considered as yielding particularly significant results, as spotlights. Others are described less fully; in some cases with a simple annotation. The report's divisions correspond to the major categories of R D projects: fish and wildlife, energy resources, and transmission technology. 18 figs., 4 tabs.

  1. Summary report of results of the vapor vacuum extraction test at the RWMC (Radioactive Waste Management Complex)

    SciTech Connect

    Sisson, J.B.; Ellis, G.C.

    1990-11-01

    A test scale vapor vacuum extraction system was operated for four months at the Radioactive Waste Management Complex. The extraction system removed more than 65 million ft{sup 3} of soil gas containing 429 Kg of Carbon Tetrachloride and 164 Kg of TCE. Hydraulic properties of the basalts were estimated and input into a numerical transport model. The model simulations indicated that a rubble zone at 190 ft dominated the soil gas flow pattern. Refined calibration of transport models will allow enhancement of the production system design to increase operational efficiency and effectiveness. 7 refs., 18 figs.

  2. Modification of the Sandia National Laboratories/California advanced coordinate measuring machine for high speed scanning

    SciTech Connect

    Baldwin, J.M.; Pilkey, R.D.; Cassou, R.M.; Summerhays, K.D.

    1997-03-01

    The Moore M48V high accuracy coordinate measuring machine (CMM), while mechanically capable of exact measurement of physical artifacts, is not, in its original configuration, well suited for rapid gathering of high density dimensional information. This report describes hardware and software modifications to the original control and data acquisition system that allow relatively high speed scanning of cylindrical features. We also estimate the accuracy of the individual point data on artifacts measured with this system and provide detailed descriptions of the hardware and software apparatus as an aid to others who may wish to apply the system to cylindrical or other simple geometries. 6 refs., 18 figs., 1 tab.

  3. Recent advances in the kinetics of oxygen reduction

    SciTech Connect

    Adzic, R.

    1996-07-01

    Oxygen reduction is considered an important electrocatalytic reaction; the most notable need remains improvement of the catalytic activity of existing metal electrocatalysts and development of new ones. A review is given of new advances in the understanding of reaction kinetics and improvements of the electrocatalytic properties of some surfaces, with focus on recent studies of relationship of the surface properties to its activity and reaction kinetics. The urgent need is to improve catalytic activity of Pt and synthesize new, possibly non- noble metal catalysts. New experimental techniques for obtaining new level of information include various {ital in situ} spectroscopies and scanning probes, some involving synchrotron radiation. 138 refs, 18 figs, 2 tabs.

  4. The Lamb shift in heliumlike uranium (U/sup 90 +/)

    SciTech Connect

    Munger, C.T. Jr.

    1987-01-01

    An experimental value of 70.4 (8.3) eV for the one-electron Lamb shift in uranium is reported, in agreement with the theoretical value of 75.3 (0.4) eV. The Lamb shift is extracted from a beam-foil time-of-flight measurement of the 54.4 (3.4) ps lifetime of the 1s 2p/sub 1/2/ /sup 3/P/sub 0/ state of heliumlike (two-electron) uranium. 18 figs.

  5. Substructure and strong interactions at the TeV scale

    SciTech Connect

    Peskin, M.E.

    1985-12-01

    A review is given of the current status of the three main theoretical ideas relevant to strong-interaction 1 TeV physics. These are composite vector bosons, Higgs bosons (''Technicolor''), and matter fermions. All involve the assumption that some object which is assumed to be fundamental in the standard model actually has dynamical internal structure. Complex, mechanistic models of the new physics are discussed. A brief digression is then made on how the weak interaction allows probing for this new structure. Direct manifestations of new 1 TeV strong interactions are discussed. 125 refs., 18 figs. (LEW)

  6. Research and development of a helium-4 based solar neutrino detector. Progress report, November 1, 1991--April 30, 1993

    SciTech Connect

    Lanou, R.E.; Maris, H.J.; Seidel, G.M.

    1993-05-01

    Superfluid helium possesses unique properties that enable it to be used as the major component of a very sensitive calorimetric detector: it is extremely pure, and the energy deposited in it is carried out by elementary excitations of the liquid which can produce quantum evaporation of He atoms at a free surface. It has a major advantage of being able to achieve very low background levels. Experimental results presented on the development of helium-4 detector include sensitivity, heat capacity of wafer-calorimeters, coincidence measurements, spectrum of alpha particles in helium, and quantum evaporation: angular dependence and efficiency. 29 refs., 16 figs., 1 tab.

  7. Laboratory testing of TiB/sub 2/-based cathodes for electrolytic production of aluminum

    SciTech Connect

    Schilling, C.H.

    1988-07-01

    Experimental research was performed to evaluate TiB/sub 2/-based cathodes, which may be used for retrofitting existing commercial Hall-Heroult cells. Candidate cathode materials and retrofit designs were analyzed in laboratory-scale electrolysis tests and nonpolarized immersion tests in molten Al. The cathode materials and cathode attachment designs were selected based on a literature review (Schilling, Hagen, and Hart 1987) and previous experimental research at the Pacific Northwest Laboratory (Hart et al. 1987). 40 refs., 16 figs., 2 tabs.

  8. Optical device with low electrical and thermal resistance Bragg reflectors

    DOEpatents

    Lear, K.L.

    1996-10-22

    A compound-semiconductor optical device and method are disclosed. The optical device is provided with one or more asymmetrically-graded heterojunctions between compound semiconductor layers for forming a distributed Bragg reflector mirror having an improved electrical and thermal resistance. Efficient light-emitting devices such as light-emitting diodes, resonant-cavity light-emitting diodes, and vertical-cavity surface-emitting lasers may be formed according to the present invention, which may be applied to the formation of resonant-cavity photodetectors. 16 figs.

  9. Motor monitoring method and apparatus using high frequency current components

    DOEpatents

    Casada, D.A.

    1996-05-21

    A motor current analysis method and apparatus for monitoring electrical-motor-driven devices are disclosed. The method and apparatus utilize high frequency portions of the motor current spectra to evaluate the condition of the electric motor and the device driven by the electric motor. The motor current signal produced as a result of an electric motor is monitored and the low frequency components of the signal are removed by a high-pass filter. The signal is then analyzed to determine the condition of the electrical motor and the driven device. 16 figs.

  10. Ultra-wideband receiver

    DOEpatents

    McEwan, T.E.

    1994-09-06

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, [+-] UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals. 16 figs.

  11. Self-Assembled Mercaptan on Mesoporous Silica (SAMMS) technology of mercury removal and stabilization

    SciTech Connect

    Feng, Xiangdong; Liu, Jun; Fryxell, G.E.

    1997-09-01

    This paper explains the technology developed to produce Self-Assembled Mercaptan on Mesoporous Silica (SAMMS) for mercury removal from aqueous wastewater and from organic wastes. The characteristics of SAMMS materials, including physical characteristics and mercury loading, and its application for mercury removal and stabilization are discussed. Binding kinetics and binding speciations are reported. Preliminary cost estimates are provided for producing SAMMS materials and for mercury removal from wastewater. The characteristics of SAMMS in mercury separation were studied at PNNL using simulated aqueous tank wastes and actual tritiated pump oil wastes from Savannah River Site; preliminary results are outlined. 47 refs., 16 figs., 16 tabs.

  12. Electrochemically stable electrolytes

    DOEpatents

    Angell, C.A.; Zhang, S.S.; Xu, K.

    1999-01-05

    This invention relates generally to inorganic ionic liquids which function as electrolytes and do not crystallize at ambient temperature. More specifically, this invention is directed to quasi-salt inorganic ionic liquids which comprise the reaction product of a strong Lewis acid with an inorganic halide-donating molecule. This invention is further directed to quasi-salt inorganic ionic liquid mixtures which comprise combinations of electrolyte additives and quasi-salt inorganic ionic liquids. These quasi-salt inorganic ionic liquid mixtures are useful electrolytes. 16 figs.

  13. The history of gamma-ray burst observations

    SciTech Connect

    Klebesadel, R.W.

    1988-01-01

    Cosmic gamma-ray bursts have been observed for 1-1/2 decades since their fortuitous discovery by nuclear test detection instruments flown on the Vela satellites. Although the volume and detail of data available through these observations has considerably refined our knowledge of the characteristics of these events, there is no confident identification of source objects or reliable model of the processes involved. The observations do suggest, however, that the bursts originate at neutron stars (probably highly-magnetized neutron stars). 17 refs., 16 figs.

  14. A manual for implementing residual radioactive material guidelines

    SciTech Connect

    Gilbert, T.L.; Yu, C.; Yuan, Y.C.; Zielen, A.J.; Jusko, M.J.; Wallo, A. III

    1989-06-01

    This manual presents information for implementing US Department of Energy (DOE) guidelines for residual radioactive material at sites identified by the Formerly Utilized Sites Remedial Action Program (FUSRAP) and the Surplus Facilities Management Program (SFMP). It describes the analysis and models used to derive site-specific guidelines for allowable residual concentrations of radionuclides in soil and the design and use of the RESRAD computer code for calculating guideline values. It also describes procedures for implementing DOE policy for reducing residual radioactivity to levels that are as low as reasonably achievable. 36 refs., 16 figs, 22 tabs.

  15. A damage model for rock fragmentation and comparison of calculations with blasting experiments in granite

    SciTech Connect

    Thorne, B.J.

    1990-10-01

    Early attempts at estimation of stress wave damage due to blasting by use of finite element calculations met with limited success due to numerical instabilities that prevented calculations from being carried to late times. An improved damage model allows finite element calculations which remain stable at late times. Reasonable agreement between crater profiles calculated with this model using the PRONTO finite element program and excavated crater profiles from blasting experiments in granite demonstrate a successful application of this model. Detailed instructions for use of this new damage model with the PRONTO finite element programs are included. 18 refs., 16 figs.

  16. Petroleum supply annual, 1997. Volume 1

    SciTech Connect

    1998-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1997 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1997, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. 16 figs., 48 tabs.

  17. Petroleum supply monthly with data for June 1997

    SciTech Connect

    1997-08-01

    Data presented in this publication describe the supply and disposition of petroleum products in the United states and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the U.S. The report includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Both summary and detailed statistics are presented. 16 figs., 56 tabs.

  18. Molten carbonate fuel cell networks: Principles, analysis, and performance. Technical note

    SciTech Connect

    Wimer, J.G.; Williams, M.C.

    1993-01-01

    The chemical reactions in an internally reforming molten carbonate fuel cell (IRMCFC) are described and combined into the overall IRMCFC reaction. Thermodynamic and electrochemical principles are discussed, and structure and operation of fuel cell stacks are explained. In networking, multiple fuel cell stacks are arranged so that reactant streams are fed and recycled through stacks in series, for higher reactant utilization and increased system efficiency. Advantages and performance of networked and conventional systems are compared, using ASPEN simulations. The concept of networking can be applied to any electrochemical membrane, such as that developed for hot gas cleanup in future power plants. 2 tabs, 16 figs, 9 refs.

  19. Electric sales and revenue 1997

    SciTech Connect

    1998-10-01

    The Electric Sales and Revenue is prepared by the Electric Power Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the US. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1997. 16 figs., 17 tabs.

  20. Petroleum supply annual 1998: Volume 1

    SciTech Connect

    1999-06-01

    The ``Petroleum Supply Annual`` (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1998 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1998, and replaces data previously published in the PSA. The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. 16 figs., 59 tabs.

  1. Method for the thermal characterization, visualization, and integrity evaluation of conducting material samples or complex structures

    DOEpatents

    Ortiz, M.G.

    1992-11-24

    Disclosed is a method for modeling a conducting material sample or structure (herein called a system) as at least two regions which comprise an electrical network of resistances, for measuring electric resistance between at least two selected pairs of external leads attached to the surface of the system, wherein at least one external lead is attached to the surface of each of the regions, and, using basic circuit theory, for translating measured resistances into temperatures or thermophysical properties in corresponding regions of the system. 16 figs.

  2. Process for producing phenolic compounds from lignins

    DOEpatents

    Agblevor, F.A.

    1998-09-15

    A process is described for the production of low molecular weight phenolic compounds from lignins through the pyrolysis of the lignins in the presence of a strong base. In a preferred embodiment, potassium hydroxide is present in an amount of from about 0.1% to about 5% by weight, the pyrolysis temperature is from about 400 C to about 600 C at atmospheric pressure, and the time period for substantial completion of the reaction is from about 1--3 minutes. Examples of low molecular weight phenolic compounds produced include methoxyphenols, non-methoxylated phenols, and mixtures thereof. 16 figs.

  3. Design approaches and parameters for magnetically levitated transport systems. [Null flux suspension (Maglev)

    SciTech Connect

    Danby, G.T.; Powell, J.R.

    1988-01-01

    Mechanically levitated transport system approaches are assessed with regard to thrust power needs, track cost, suspension stability, and safety. The null flux suspension appears as the favored approach, having the least thrust power requirements, highest stability, and lowest amount of track material. Various null flux configurations are described together with their operating parameters. The Linear Synchronous Motor (LSM) propulsion system is also described for propelling the suspended vehicles. Cryogenics and superconductivity aspects are discussed and the effect of high T/sub c/ superconductors evaluated. 13 refs., 16 figs., 2 tabs.

  4. Parasitic oscillation suppression in solid state lasers using absorbing thin films

    DOEpatents

    Zapata, L.E.

    1994-08-02

    A thin absorbing film is bonded onto at least certain surfaces of a solid state laser gain medium. An absorbing metal-dielectric multilayer film is optimized for a broad range of incidence angles, and is resistant to the corrosive/erosive effects of a coolant such as water, used in the forced convection cooling of the film. Parasitic oscillations hamper the operation of solid state lasers by causing the decay of stored energy to amplified rays trapped within the gain medium by total and partial internal reflections off the gain medium facets. Zigzag lasers intended for high average power operation require the ASE absorber. 16 figs.

  5. Study of mechanisms of time-dependent crack growth at elevated temperature: Second annual progress report, February 16, 1987-February 15, 1988

    SciTech Connect

    Saxena, A.; Stock, S.R.; Gieseke, B.; Banerji, K.

    1988-02-25

    The objective of this study is to conduct creep and creep-fatigue carck growth tests and to characterize the crack tip damage mechanisms in a model material (copper with 1 wt percent antimony) which is known to cavitate at the grain boundaries under creep deformation. The above data and observations will be used to develop mechanistic models for cumulative crack tip damage under complex loading conditions at elevated temperatures. The application of these models will also be extended to situations involving non-periodic loading. 6 refs., 16 figs.

  6. Electrocatalytic cermet sensor

    DOEpatents

    Shoemaker, E.L.; Vogt, M.C.

    1998-06-30

    A sensor is described for O{sub 2} and CO{sub 2} gases. The gas sensor includes a plurality of layers driven by a cyclic voltage to generate a unique plot characteristic of the gas in contact with the sensor. The plurality of layers includes an alumina substrate, a reference electrode source of anions, a lower electrical reference electrode of Pt coupled to the reference source of anions, a solid electrolyte containing tungsten and coupled to the lower reference electrode, a buffer layer for preventing flow of Pt ions into the solid electrolyte and an upper catalytically active Pt electrode coupled to the buffer layer. 16 figs.

  7. Unresolved gamma rays from high-spin states

    SciTech Connect

    Stephens, F.S.

    1985-08-01

    The ..gamma..-rays which are emitted from the highest spin states in nuclei cannot be resolved using present techniques. Nevertheless, methods are being developed to study nuclear structures in this spin range. For example, coincidence data has been used in the study of superdeformations and moments of inertia. While the general properties of these correlation plots are in accord with present expectations, there are several puzzling features of the data which require more study. One unresolved aspect concerns ..gamma..-ray energy spreads in a given decay pathway. In addition, higher-order correlation methods are in various stages of inception. 15 refs., 16 figs. (WRF)

  8. Power radiated from ITER and CIT by impurities

    SciTech Connect

    Cummings, J.; Cohen, S.A.; Hulse, R.; Post, D.E.; Redi, M.H.; Perkins, J.

    1990-07-01

    The MIST code has been used to model impurity radiation from the edge and core plasmas in ITER and CIT. A broad range of parameters have been varied, including Z{sub eff}, impurity species, impurity transport coefficients, and plasma temperature and density profiles, especially at the edge. For a set of these parameters representative of the baseline ITER ignition scenario, it is seen that impurity radiation, which is produced in roughly equal amounts by the edge and core regions, can make a major improvement in divertor operation without compromising core energy confinement. Scalings of impurity radiation with atomic number and machine size are also discussed. 22 refs., 16 figs.

  9. Urinary Tract Refunctionalization After Prior Diversion in Children

    PubMed Central

    Hendren, W. Hardy

    1974-01-01

    Thirty-two children who had undergone previous urinary diversion were operated upon to refunctionalize the bladder. In 24 the diversion had been considered permanent, and in eight, temporary. Success in these procedures suggests that many young patients deserve a second look for possible “undiversion.” ImagesFig. 6.Fig. 7.Fig. 8.Fig. 9.Fig. 10.Fig. 11.Fig. 12.Fig. 13.Fig. 14.Fig. 15.Fig. 16.Fig. 17a.Fig. 17b.Fig. 18. PMID:4416811

  10. Analysis of health impact inputs to the US Department of Energy's risk information system

    SciTech Connect

    Droppo, J.G. Jr.; Buck, J.W.; Strenge, D.L.; Siegel, M.R.

    1990-08-01

    The US Department of Energy (DOE) is in the process of completing a survey of environmental problems, referred to as the Environmental Survey, at their facilities across the country. The DOE Risk Information System (RIS) is being used to prioritize these environmental problems identified in the Environmental Survey's findings. This report contains a discussion of site-specific public health risk parameters and the rationale for their inclusion in the RIS. These parameters are based on computed potential impacts obtained with the Multimedia Environmental Pollutant Assessment System (MEPAS). MEPAS is a computer-based methodology for evaluating the potential exposures resulting from multimedia environmental transport of hazardous materials. This report has three related objectives: document the role of MEPAS in the RIS framework, report the results of the analysis of alternative risk parameters that led to the current RIS risk parameters, and describe analysis of uncertainties in the risk-related parameters. 20 refs., 17 figs., 10 tabs.

  11. Script identification from images using cluster-based templates

    DOEpatents

    Hochberg, J.G.; Kelly, P.M.; Thomas, T.R.

    1998-12-01

    A computer-implemented method identifies a script used to create a document. A set of training documents for each script to be identified is scanned into the computer to store a series of exemplary images representing each script. Pixels forming the exemplary images are electronically processed to define a set of textual symbols corresponding to the exemplary images. Each textual symbol is assigned to a cluster of textual symbols that most closely represents the textual symbol. The cluster of textual symbols is processed to form a representative electronic template for each cluster. A document having a script to be identified is scanned into the computer to form one or more document images representing the script to be identified. Pixels forming the document images are electronically processed to define a set of document textual symbols corresponding to the document images. The set of document textual symbols is compared to the electronic templates to identify the script. 17 figs.

  12. The Robotic Edge Finishing Laboratory

    SciTech Connect

    Loucks, C.S.; Selleck, C.B.

    1990-08-01

    The Robotic Edge Finishing Laboratory at Sandia National Laboratories is developing four areas of technology required for automated deburring, chamfering, and blending of machined edges: (1) the automatic programming of robot trajectories and deburring processes using information derived from a CAD database, (2) the use of machine vision for locating the workpiece coupled with force control to ensure proper tool contact, (3) robotic deburring, blending, and machining of precision chamfered edges, and (4) in-process automated inspection of the formed edge. The Laboratory, its components, integration, and results from edge finishing experiments to date are described here. Also included is a discussion of the issues regarding implementation of the technology in a production environment. 24 refs., 17 figs.

  13. Prospects at high energies

    SciTech Connect

    Quigg, C.

    1988-11-01

    I discuss some possibilities for neutrino experiments in the fixed-target environment of the SPS, Tevatron, and UNK, with their primary proton beams of 0.4, 0.9, and 3.0 TeV. The emphasis is on unfinished business: issues that have been recognized for some time, but not yet resolved. Then I turn to prospects for proton-proton colliders to explore the 1-TeV scale. I review the motivation for new physics in the neighborhood of 1 TeV and mention some discovery possibilities for high-energy, high-luminosity hadron colliders and the implications they would have for neutrino physics. I raise the possibility of the direct study of neutrino interactions in hadron colliders. I close with a report on the status of the SSC project. 38 refs., 17 figs.

  14. Statistical evaluation of PACSTAT random number generation capabilities

    SciTech Connect

    Piepel, G.F.; Toland, M.R.; Harty, H.; Budden, M.J.; Bartley, C.L.

    1988-05-01

    This report summarizes the work performed in verifying the general purpose Monte Carlo driver-program PACSTAT. The main objective of the work was to verify the performance of PACSTAT's random number generation capabilities. Secondary objectives were to document (using controlled configuration management procedures) changes made in PACSTAT at Pacific Northwest Laboratory, and to assure that PACSTAT input and output files satisfy quality assurance traceability constraints. Upon receipt of the PRIME version of the PACSTAT code from the Basalt Waste Isolation Project, Pacific Northwest Laboratory staff converted the code to run on Digital Equipment Corporation (DEC) VAXs. The modifications to PACSTAT were implemented using the WITNESS configuration management system, with the modifications themselves intended to make the code as portable as possible. Certain modifications were made to make the PACSTAT input and output files conform to quality assurance traceability constraints. 10 refs., 17 figs., 6 tabs.

  15. System for monitoring an industrial process and determining sensor status

    DOEpatents

    Gross, K.C.; Hoyer, K.K.; Humenik, K.E.

    1995-10-17

    A method and system for monitoring an industrial process and a sensor are disclosed. The method and system include generating a first and second signal characteristic of an industrial process variable. One of the signals can be an artificial signal generated by an auto regressive moving average technique. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the two pairs of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test. 17 figs.

  16. TFTR: Present results and prospects for tritium operation

    SciTech Connect

    Furth, H.P.

    1989-08-01

    Experiments in TFTR are making contributions to several critical problem areas of tokamak reactor design. The magnitude of tokamak plasma transport is found to be sensitive to the shape of the density profile: central peaking may be advantageous for high-temperature tokamak confinement. For moderate-Q reactor operation, the present TFTR data base suffices to solve the three main steady-state reactor-plasma-physics problems of current drive, refueling, and impurity control. The achievement of high Q-values at high fusion power densities is being pursued in the economically promising direction of maximizing performance at moderate plasma current. In TFTR D-T plasmas, fusion reactions due to non-Maxwellian energetic-ion components will serve to generate alpha-particle populations of significant magnitude, permitting the near-term study of collective alpha-particle phenomena. 56 refs., 17 figs., 2 tabs.

  17. Large scale DNA microsequencing device

    DOEpatents

    Foote, R.S.

    1997-08-26

    A microminiature sequencing apparatus and method provide a means for simultaneously obtaining sequences of plural polynucleotide strands. The apparatus cosists of a microchip into which plural channels have been etched using standard lithographic procedures and chemical wet etching. The channels include a reaction well and a separating section. Enclosing the channels is accomplished by bonding a transparent cover plate over the apparatus. A first oligonucleotide strand is chemically affixed to the apparatus through an alkyl chain. Subsequent nucleotides are selected by complementary base pair bonding. A target nucleotide strand is used to produce a family of labelled sequencing strands in each channel which are separated in the separating section. During or following separation the sequences are determined using appropriate detection means. 17 figs.

  18. Heat-Flux Gage thermophosphor system

    SciTech Connect

    Tobin, K.W.

    1991-08-01

    This document describes the installation, hardware requirements, and application of the Heat-Flux Gage (Version 1.0) software package developed by the Oak Ridge National Laboratory, Applied Technology Division. The developed software is a single component of a thermographic phosphor-based temperature and heat-flux measurement system. The heat-flux transducer was developed by EG G Energy Measurements Systems and consists of a 1- by 1-in. polymethylpentene sheet coated on the front and back with a repeating thermographic phosphor pattern. The phosphor chosen for this application is gadolinium oxysulphide doped with terbium. This compound has a sensitive temperature response from 10 to 65.6{degree}C (50--150{degree}F) for the 415- and 490-nm spectral emission lines. 3 refs., 17 figs.

  19. Modeling of reflux condensation and countercurrent annular flow in a two-phase closed thermosyphon

    SciTech Connect

    Reed, J.G.; Tien, C.L.

    1985-12-01

    Reflux condensation in the steam generator tubes of a PWR is a potentially important heat removal mechanism during the cool-down phase following a small-break LOCA. This work studies reflux condensation using the two-phase closed thermosyphon as a model system. An analytical model based on control-volume formulations of mass, momentum, and energy balances for the liquid and vapor flows in each section of the device is developed. Numerical solutions to the system of governing equations are presented for both steady-state and transient operation of the device. While no data with which to compare the results of the transient analysis are currently available, the steady-state solutions compare well with available experimental data on flooding and film thickness. Thus, the analytical approach presented in this work is demonstrated to be a powerful technique for analyzing countercurrent, annular, two-phase flows. 17 refs., 17 figs.

  20. PC-1D installation manual and user's guide

    SciTech Connect

    Basore, P.A.

    1991-05-01

    PC-1D is a software package for personal computers that uses finite-element analysis to solve the fully-coupled two-carrier semiconductor transport equations in one dimension. This program is particularly useful for analyzing the performance of optoelectronic devices such as solar cells, but can be applied to any bipolar device whose carrier flows are primarily one-dimensional. This User's Guide provides the information necessary to install PC-1D, define a problem for solution, solve the problem, and examine the results. Example problems are presented which illustrate these steps. The physical models and numerical methods utilized are presented in detail. This document supports version 3.1 of PC-1D, which incorporates faster numerical algorithms with better convergence properties than previous versions of the program. 51 refs., 17 figs., 5 tabs.

  1. Modeling 1-D deflagration to detonation transition (DDT) in porous explosive

    SciTech Connect

    Weston, A.M.; Lee, E.L.

    1985-04-04

    A one-dimensional Lagrange hydrodynamic computer model is presented that describes gas flow, compaction, ignition, and deflagration processes in deformable porous beds. The model makes use of a consumable finite element cell that allows gas to flow through a compacting matrix. The model can be regarded as structural in the sense that the initial cell dimension is directly related to mean particle size. Experimental investigation of the DDT phenomenon are typically carried out using long thick-walled tubes filled with a granular porous bed of reactive material. In this configuration, much of the process can be described by flow in one dimension. We present calculations that simulate both squib initiated and piston initiated experiments on porous HMX to point out various observed features. Our purpose is to establish a basis for setting bounds on the physical parameters that describe such transient reaction processes. 16 refs., 17 figs., 1 tab.

  2. Hanford cultural resources management plan

    SciTech Connect

    Chatters, J.C.

    1989-06-01

    As a federal agency, the US Department of Energy (DOE) has been directed by Congress and the President to provide leadership in the preservation of prehistoric, historical, and cultural resources on lands it administers, to manage these in a spirit of stewardship for future generations, and to protect and preserve the rights of Native Americans to religious freedom. The purpose of this document is to describe how the DOE-Richland Operations (DOE-RL) will meet those responsibilities on the Hanford Site, pursuant to guidelines for Agency Responsibilities under the Historic Preservation Act (FR 53:31, February 17, 1988). This document is intended for multiple uses. Among other things, the text is designed as a manual for cultural resource managers to follow and as an explanation of the process of cultural resource regulatory compliance for the DOE-RL and Site contractors. 10 refs., 17 figs., 11 tabs.

  3. Velocity Measurements at Three Fish Screening Facilities in the Yakima Basin, Washington : Summer 1989 Annual Report.

    SciTech Connect

    Abernethy, C. Scott; Neitzel, Duane A.; Lusty, E. William

    1990-09-01

    The Pacific Northwest Laboratory (PNL) measured the velocity conditions at three fish screening facilities in the Yakima River Basin: Wapato, Chandler, and Easton Screens. The measurement objectives were different at the three screens. At Wapato, approach and sweep velocities were measured to evaluate the effect of rearing pens in the screen forebay. A complete survey was performed at the Chandler Screens. At Easton, velocity was measured behind the screens to provide information for the installation of porosity boards to balance flow through the screens. Salmon-rearing pens used at the Wapato Canal had a minimal effect on the magnitude of approach and sweep velocities at the face of the drum screens, although the pens caused increased turbulence and variability in water velocities. The net pens did not appear to affect flows through the three fish bypasses. 8 refs., 17 figs., 5 tabs.

  4. Environmental Survey preliminary report, Department of Energy (DOE) activities at Santa Susana Field Laboratories, Ventura County, California

    SciTech Connect

    Not Available

    1989-02-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) activities at the Santa Susana Field Laboratories Site (DOE/SSFL), conducted May 16 through 26, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual participants for the Survey team are being supplied by an private contractor. The objective of the survey is to identify environmental problems and areas of environmental risk associated with DOE activities at SSFL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at SSFL, and interviews with site personnel. 90 refs., 17 figs., 28 tabs.

  5. Hydrologic modeling to predict performance of shallow land burial cover designs at the Los Alamos National Laboratory

    SciTech Connect

    Nyhan, J.W.

    1989-03-01

    The water balance relationships of two shallow land burial (SLB) cover configurations were studied using a hydrologic model in a preliminary attempt to design waste disposal site covers for successful long-term closure at Los Alamos. Burial site performance requirements for site closure are first discussed, along with the role of hydrologic models in assessing the dynamics of the hydrology of the SLB cover. The calibration of a hydrologic model using field data from two SLB cover designs is then described, followed by an analysis of long-term climatic model input parameters across Los Alamos National Laboratory. These two calibrated models are then used to evaluate the influence of vegetation, precipitation, and runoff curve number on the design of SLB covers within Los Alamos county. Future directions of field research efforts and subsequent hydrologic modeling activities were recommended in terms of their usefulness for waste management decisions to be made at Los Alamos. 24 refs., 17 figs., 9 tabs.

  6. Seasonal cycle of the residual mean meridional circulation in the stratosphere

    SciTech Connect

    Rosenlof, K.H.

    1995-03-20

    The transformed Eulerian-mean (TEM) residual circulation is used to study the zonally averaged transport of mass in the stratosphere. The residual circulation is estimated from heating rates computed with a radiative transfer model using data from the Upper Atmosphere Research Satellite (UARS) as inputs. An annual cycle exists in the resulting circulation in the lower stratosphere, with a larger net upward mass flux across a pressure surface in the tropics during northern hemisphere winter than during northern hemisphere summer. The annual cycle in upward tropical mass flux follows the annual cycle in downward mass flux across a pressure surface in the northern hemisphere extratropics. It is argued that the annual cycle in zonal momentum forcing in the northern hemisphere stratosphere is controlling mass flux across a pressure surface in the lower stratosphere both in the tropics and in the northern hemisphere extratropics. 40 refs., 17 figs., 5 tabs.

  7. Coherent and spontaneous Raman spectroscopy in shocked and unshocked liquids

    SciTech Connect

    Schmidt, S.C.; Moore, D.S.; Schiferl, D.; Chatelet, M.; Turner, T.P.; Shaner, J.W.; Shampine, D.L.; Holt, W.T.

    1985-01-01

    Coherent and non-coherent Raman spectroscopy is being used to study the structure and energy transfer in molecular liquids at high pressures. Stimulated Raman scattering, coherent anti-Stokes Raman scattering, and Raman induced Kerr effect scattering measurements have been performed in liquid benzene and liquid nitromethane shocked to pressures up to 11 GPa. Frequency shifts were observed for the 992 cm/sup -1/ ring stretching mode of benzene and the 920 cm/sup -1/ CN stretching mode of nitromethane. Results of these dynamic experiments are compared to spontaneous Raman scattering measurements made in a high temperature diamond anvil cell. Also, a picosecond infrared pump/spontaneous anti-Strokes Raman probe experiment is being used to measure CH stretch vibrational relaxation times in liquid halogenated methanes statically compressed to a few tenths GPa. 87 refs., 17 figs.

  8. Techniques for estimating flood hydrographs for ungaged urban watersheds

    SciTech Connect

    Stricker, V.A.; Sauer, V.B.

    1982-04-01

    The Clark Method, modified slightly, was used to develop a synthetic dimensionless hydrograph that can be used to estimate flood hydrographs for ungaged urban watersheds. Application of the technique results in a typical (average) flood hydrograph for a given peak discharge. Input necessary to apply the technique is an estimate of basin lagtime and the recurrence interval peak discharge. Equations for this purpose were obtained from a recent nationwide study on flood frequency in urban watersheds. A regression equation was developed which relates flood volumes to drainage area size, basin lagtime, and peak discharge. This equation is useful where storage of floodwater may be a part of design or flood prevention. 6 refs., 17 figs., 5 tabs.

  9. Tests of the radiation hardness of VLSI Integrated Circuits and Silicon Strip Detectors for the SSC (Superconducting Super Collider) under neutron, proton, and gamma irradiation

    SciTech Connect

    Ziock, H.J.; Milner, C.; Sommer, W.F. ); Carteglia, N.; DeWitt, J.; Dorfan, D.; Hubbard, B.; Leslie, J.; O'Shaughnessy, K.F.; Pitzl, D.; Rowe, W.A.; Sadrozinski, H.F.W.; Seiden, A.; Spencer, E. . Inst. for Particle Physics); Ellison, J.A. ); Ferguson, P. ); Giubellino

    1990-01-01

    As part of a program to develop a silicon strip central tracking detector system for the Superconducting Super Collider (SSC) we are studying the effects of radiation damage in silicon detectors and their associated front-end readout electronics. We report on the results of neutron and proton irradiations at the Los Alamos National Laboratory (LANL) and {gamma}-ray irradiations at UC Santa Cruz (UCSC). Individual components on single-sided AC-coupled silicon strip detectors and on test structures were tested. Circuits fabricated in a radiation hard CMOS process and individual transistors fabricated using dielectric isolation bipolar technology were also studied. Results indicate that a silicon strip tracking detector system should have a lifetime of at least one decade at the SSC. 17 refs., 17 figs.

  10. The role of technology in reducing health care costs. Final project report

    SciTech Connect

    Sill, A.E.; Warren, S.; Dillinger, J.D.; Cloer, B.K.

    1997-08-01

    Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. This study was conducted by implementing both top-down and bottom-up strategies. The top-down approach used prosperity gaming methodology to identify future health care delivery needs. This effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements. The bottom-up approach identified and ranked interventional therapies employed in existing care delivery systems for a host of health-related conditions. Economic analysis formed the basis for development of care pathway interaction models for two of the most pervasive, chronic disease/disability conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Societal cost-benefit relationships based on these analyses were used to evaluate the effect of emerging technology in these treatment areas. 17 figs., 48 tabs.

  11. Asymmetrical field emitter

    DOEpatents

    Fleming, J.G.; Smith, B.K.

    1995-10-10

    A method is disclosed for providing a field emitter with an asymmetrical emitter structure having a very sharp tip in close proximity to its gate. One preferred embodiment of the present invention includes an asymmetrical emitter and a gate. The emitter having a tip and a side is coupled to a substrate. The gate is connected to a step in the substrate. The step has a top surface and a side wall that is substantially parallel to the side of the emitter. The tip of the emitter is in close proximity to the gate. The emitter is at an emitter potential, and the gate is at a gate potential such that with the two potentials at appropriate values, electrons are emitted from the emitter. In one embodiment, the gate is separated from the emitter by an oxide layer, and the emitter is etched anisotropically to form its tip and its asymmetrical structure. 17 figs.

  12. Biological production of fuels from coal-derived gases: Quarterly report, June 20, 1987-September 20, 1987

    SciTech Connect

    Not Available

    1987-01-01

    The technical feasibility of converting CO, H/sub 2/ and CO/sub 2/ from synthesis gas to ethanol and acetate has been demonstrated in a continuous stirred-tank reactor with both continuous gas and liquid feed. This report describes the equipment and procedures for continuous operation, as well as steady-state experiments carried out at three steady-state conditions. Although the operating conditions for continuous operation have not been optimized and a significant amount of acetate remains in the product stream, the feasibility of using a bacterial process for synthesis gas conversion to liquid fuels has been demonstrated. Future work during subsequent contracts should concentrate on producing a single liquid fuel as a product, increasing the product concentration, and defining and optimizing reaction conditions for maximizing, product yield. 3 refs., 17 figs.

  13. Compilation of poultry and egg parameters for the PATHWAY code

    SciTech Connect

    Ikenberry, T.A.

    1982-08-01

    The PATHWAY computer code was developed as a part of the foodchain pathway analysis task. The objective was to estimate radionuclide ingestion rates of residents of Lincoln (Nevada), Washington (Utah), and Iron (Utah) counties during the period 1951-1962, which resulted from explosion of nuclear devices at the Nevada Test Site (NTS). Estimation of radionuclide ingestion rates involves determination of radionuclide concentrations in dietary items as a function of time and geographic area, and consumption rates of such items as a function of age and lifestyle. Poultry and eggs may have been relatively significant dose contributors to humans, because of the fairly large consumption rates of these products, and because of potential radionuclide concentration in them. This paper describes nuclide-dependent and nuclide-independent parameters related to poultry products, and the determination of specific values of these parameters. 17 figs., 10 tabs.

  14. Underground barrier construction apparatus with soil-retaining shield

    DOEpatents

    Gardner, B.M.; Smith, A.M.; Hanson, R.W.; Hodges, R.T.

    1998-08-04

    An apparatus is described for building a horizontal underground barrier by cutting through soil and depositing a slurry, preferably one which cures into a hardened material. The apparatus includes a digging means for cutting and removing soil to create a void under the surface of the ground, a shield means for maintaining the void, and injection means for inserting barrier-forming material into the void. In one embodiment, the digging means is a continuous cutting chain. Mounted on the continuous cutting chain are cutter teeth for cutting through soil and discharge paddles for removing the loosened soil. This invention includes a barrier placement machine, a method for building an underground horizontal containment barrier using the barrier placement machine, and the underground containment system. Preferably the underground containment barrier goes underneath and around the site to be contained in a bathtub-type containment. 17 figs.

  15. The GNASH preequilibrium-statistical nuclear model code

    SciTech Connect

    Arthur, E. D.

    1988-01-01

    The following report is based on materials presented in a series of lectures at the International Center for Theoretical Physics, Trieste, which were designed to describe the GNASH preequilibrium statistical model code and its use. An overview is provided of the code with emphasis upon code's calculational capabilities and the theoretical models that have been implemented in it. Two sample problems are discussed, the first dealing with neutron reactions on /sup 58/Ni. the second illustrates the fission model capabilities implemented in the code and involves n + /sup 235/U reactions. Finally a description is provided of current theoretical model and code development underway. Examples of calculated results using these new capabilities are also given. 19 refs., 17 figs., 3 tabs.

  16. Impact of mechanical- and maintenance-induced failures of main reactor coolant pump seals on plant safety

    SciTech Connect

    Azarm, M A; Boccio, J L; Mitra, S

    1985-12-01

    This document presents an investigation of the safety impact resulting from mechanical- and maintenance-induced reactor coolant pump (RCP) seal failures in nuclear power plants. A data survey of the pump seal failures for existing nuclear power plants in the US from several available sources was performed. The annual frequency of pump seal failures in a nuclear power plant was estimated based on the concept of hazard rate and dependency evaluation. The conditional probability of various sizes of leak rates given seal failures was then evaluated. The safety impact of RCP seal failures, in terms of contribution to plant core-melt frequency, was also evaluated for three nuclear power plants. For leak rates below the normal makeup capacity and the impact of plant safety were discussed qualitatively, whereas for leak rates beyond the normal make up capacity, formal PRA methodologies were applied. 22 refs., 17 figs., 19 tabs.

  17. Integrated Project Management System description. [UMTRAP Project

    SciTech Connect

    Not Available

    1987-03-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project is a Department of Energy (DOE) designated Major System Acquisition (MSA). To execute and manage the Project mission successfully and to comply with the MSA requirements, the UMTRA Project Office ( Project Office'') has implemented and operates an Integrated Project Management System (IPMS). The Project Office is assisted by the Technical Assistance Contractor's (TAC) Project Integration and Control (PIC) Group in system operation. Each participant, in turn, provides critical input to system operation and reporting requirements. The IPMS provides a uniform structured approach for integrating the work of Project participants. It serves as a tool for planning and control, workload management, performance measurement, and specialized reporting within a standardized format. This system description presents the guidance for its operation. Appendices 1 and 2 contain definitions of commonly used terms and abbreviations and acronyms, respectively. 17 figs., 5 tabs.

  18. Repair, sidetrack, drilling, and completion of EE-2A for Phase 2 reservoir production service

    SciTech Connect

    Dreesen, D.S.; Cocks, G.G.; Nicholson, R.W.; Thomson, J.C.

    1989-08-01

    Hot Dry Rock (HDR) geothermal energy well EE-2 at Fenton Hill, New Mexico, was sidetracked and redrilled into the HDR Phase II reservoir after two unsuccessful attempts to repair damage in the lower wellbore. Before sidetracking was begun, six cement slurries were pumped to plug the abandoned lower wellbore and to support the production casing where drilling wear was predicted and where sidetracking was to occur. This work and the redrill of EE-2A were completed in November 1987. Specifications were prepared for a state-of-the-art tie-back casing, which was procured, manufactured, and delivered to Fenton Hill in May 1988. The well was then completed in June 1988 for hot-water production service by cementing in a liner and the upper section of production casing and installing and cementing a tie-back casing string. 24 refs., 17 figs., 5 tabs.

  19. Colonie Interim Storage Site annual site environmental report for calendar year 1989, Colonie, New York

    SciTech Connect

    Not Available

    1990-05-01

    IN 1984, Congress assigned the cleanup of the National Lead (NL) Industries site in Colonie, New York, to the Department of Energy (DOE) as part of a decontamination research and development project under the 1984 Energy and Water Appropriations Act. DOE then included the site in the Formerly Utilized Sites Remedial Action Program (FUSRAP), an existing DOE program to decontaminate or otherwise control sites where residual radioactive materials remain for the early years of the nation's atomic energy program. DOE instituted an environmental monitoring program at the site in 1984. Results are presented annually in reports such as this. Under FUSRAP, the first environmental monitoring report for this site presented data for calendar year 1984. This report presents the findings of the environmental monitoring program conducted during calendar year 1989. 16 refs., 17 figs., 14 tabs.

  20. The role of accelerators in the nuclear fuel cycle

    SciTech Connect

    Takahashi, Hiroshi.

    1990-01-01

    The use of neutrons produced by the medium energy proton accelerator (1 GeV--3 GeV) has considerable potential in reconstructing the nuclear fuel cycle. About 1.5 {approximately} 2.5 ton of fissile material can be produced annually by injecting a 450 MW proton beam directly into fertile materials. A source of neutrons, produced by a proton beam, to supply subcritical reactors could alleviate many of the safety problems associated with critical assemblies, such as positive reactivity coefficients due to coolant voiding. The transient power of the target can be swiftly controlled by controlling the power of the proton beam. Also, the use of a proton beam would allow more flexibility in the choice of fuel and structural materials which otherwise might reduce the reactivity of reactors. This paper discusses the rate of accelerators in the transmutation of radioactive wastes of the nuclear fuel cycles. 34 refs., 17 figs., 9 tabs.

  1. Real-time neural network earthquake profile predictor

    DOEpatents

    Leach, R.R.; Dowla, F.U.

    1996-02-06

    A neural network has been developed that uses first-arrival energy to predict the characteristics of impending earthquake seismograph signals. The propagation of ground motion energy through the earth is a highly nonlinear function. This is due to different forms of ground motion as well as to changes in the elastic properties of the media throughout the propagation path. The neural network is trained using seismogram data from earthquakes. Presented with a previously unseen earthquake, the neural network produces a profile of the complete earthquake signal using data from the first seconds of the signal. This offers a significant advance in the real-time monitoring, warning, and subsequent hazard minimization of catastrophic ground motion. 17 figs.

  2. Hypervelocity plate acceleration

    SciTech Connect

    Marsh, S.P.; Tan, T.H.

    1991-01-01

    Shock tubes have been used to accelerate 1.5-mm-thick stainless steel plates to high velocity while retaining their integrity. The fast shock tubes are 5.1-cm-diameter, 15.2-cm-long cylinders of PBX-9501 explosive containing a 1.1-cm-diameter cylindrical core of low-density polystyrene foam. The plates have been placed directly in contact with one face of the explosive system. Plane-wave detonation was initiated on the opposite face. A Mach disk was formed in the imploding styrofoam core, which provided the impulse required to accelerate the metal plate to high velocity. Parametric studies were made on this system to find the effect of varying plate metal, plate thickness, foam properties, and addition of a barrel. A maximum plate velocity of 9.0 km/s has been observed. 6 refs., 17 figs.

  3. Report on environmental effects at Yuma Proving Ground from continued testing of projectiles containing beryllium and depleted uranium

    SciTech Connect

    Shinn, J.H.; Sharmer, L.A.; Cederwall, R.T.; Novo, M.G.; Mitchell, C.S.

    1988-02-01

    The purpose of this report is to determine, from the available information, the potential environmental effects at Yuma Proving Ground (YPG), resulting from further testing of surface-burst artillery projectiles (XM785) containing amounts of beryllium (Be) and depleted uranium (DU). A model was applied to assess the downwind deposition and air concentrations of Be and DU during actual tests with the XM753 and XM785 at YPG. In addition, one single, static test of an XM785 was conducted at Tonopah Test Range. The potential effects of continued testing of devices such as the XM753 and XM785 appear to be insignificant, providing that prudent mitigations and environmental management practices are carried out. 44 refs., 17 figs., 11 tabs.

  4. Spawning and abundance of fall chinook salmon (Oncorhynchus tshawytscha) in the Hanford Reach of the Columbia River, 1948--1988

    SciTech Connect

    Dauble, D.D.; Watson, D.G.

    1990-03-01

    The Hanford Reach of the Columbia River provides the only major spawning habitat for the upriver bright (URB) race of fall chinook salmon in the mainstem Columbia River. Hanford Site biologists have conducted aerial surveys of spawning salmon in the Hanford Reach since 1948. This report summarizes data on fall chinook salmon spawning in the Hanford Reach and presents a discussion of factors that may affect population trends. Most data are limited to fisheries agency reports and other working documents. Fisheries management practices in the Columbia River system have changed rapidly over the last decade, particularly under requirements of the Pacific Northwest Power Planning and Conservation Act of 1980. New information has been generated and included in this report. 75 refs., 17 figs., 11 tabs.

  5. Causes of instability at LaSalle and consequences from postulated scram failure

    SciTech Connect

    Wulff, W.; Cheng, H.S.; Mallen, A.N.

    1990-01-01

    The March 9, 1988 instability event at the LaSalle County-2 BWR power plant was simulated on the BNL Engineering Plant Analyzer (EPA) in order to assess its ability to simulate oscillatory transients, to identify the causes of the instability, to determine the maximum power amplitude of limit-cycle oscillations after postulated scram failure and to rank leading modeling parameters which affect instability. The EPA was found capable of simulating the LaSalle instability, which was found to have been caused by the combination of low core flow, moderately high power, low feedwater temperature and strong bottom power peaking. After postulated scram failure, the power was found to peak at 1300% of normal full power. Void reactivity, power peaking and core exit flow impedance were found to be the leading phenomena affecting thermohydraulic instability. 3 refs. 17 figs., 3 tabs.

  6. Apparatus and method for sealing perforated well casing

    DOEpatents

    Blount, C.G.; Benham, R.A.; Brock, J.L.; Emerson, J.A.; Ferguson, K.R.; Scheve, D.F.; Schmidt, J.H.; Schuler, K.W.; Stanton, P.L.

    1997-03-25

    Perforations and other openings in well casings, liners and other conduits may be substantially blocked or sealed to prevent fluid flow between the casing or liner interior and an earth formation by placing a radially expansible sleeve adjacent the perforations or openings and urging the sleeve into forcible engagement with the casing or inner wall using an explosive charge. An apparatus including a radially contracted sleeve formed by a coiled plate member or a tubular member having flutes defined by external and internal folds, may be deployed into a well casing or liner through a production or injection tubing string and on the end of a flexible cable or coilable tubing. An explosive charge disposed on the apparatus and within the sleeve may be detonated to urge the sleeve into forcible engagement with the casing inner wall. 17 figs.

  7. Mechanism of failure of two pyrotechnic components

    SciTech Connect

    Munger, A.C.; Woods, C.M.

    1985-01-01

    An investigation of two unrelated pyrotechnic test device misfires revealed an ignition phenomenon that helps to explain the well-known necessity of maintaining good integrity between bridgewire and powder in hot-wire devices that use insensitive pyrotechnic powders. The factor common to both devices was the TiH/sub 1.65/:KC10/sub 4/ in a 33:67 weight percent ratio. This material is being used because of its high static insensitivity, a characteristic that makes good bridgewire contact mandatory for reliable ignition. Extensive work with a scanning electron microscope revealed that not only does the bridgewire require entrapment, but the initiation reaction gases must be contained within the immediate vicinity of the bridgewire or the initiation will not be sustained. Evidence is presented to document the phenomenon that caused the misfire of both components that were investigated. 9 refs., 17 figs.

  8. System for monitoring an industrial process and determining sensor status

    DOEpatents

    Gross, K.C.; Hoyer, K.K.; Humenik, K.E.

    1997-05-13

    A method and system are disclosed for monitoring an industrial process and a sensor. The method and system include generating a first and second signal characteristic of an industrial process variable. One of the signals can be an artificial signal generated by an auto regressive moving average technique. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the two pairs of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test. 17 figs.

  9. Tone signal generator for producing multioperator tone signals using an operator circuit including a waveform generator, a selector and an enveloper

    DOEpatents

    Dong, Q.; Jenkins, M.V.; Bernadas, S.R.

    1997-09-09

    A frequency modulation (FM) tone signal generator for generating a FM tone signal is disclosed. The tone signal generator includes a waveform generator having a plurality of wave tables, a selector and an enveloper. The waveform generator furnishes a waveform signal in response to a phase angle address signal. Each wave table stores a different waveform. The selector selects one of the wave tables in response to a plurality of selection signals such that the selected wave table largely provides the waveform signal upon being addressed largely by the phase angle address signal. Selection of the selected wave table varies with each selection signal. The enveloper impresses an envelope signal on the waveform signal. The envelope signal is used as a carrier or modulator for generating the FM tone signal. 17 figs.

  10. Toughening of epoxy resins by epoxidized soybean oil

    SciTech Connect

    Frischinger, I.; Dirlikov, S.

    1993-12-31

    Homogeneous mixtures of a liquid rubber based on prepolymers of epoxidized soybean oil with amines, diglycidyl ether of bisphenol A epoxy resins, and commercial diamines form, under certain conditions, two-phase thermosetting materials that consist of a rigid epoxy matrix and randomly distributed small rubbery soybean particles (0.1-5 {mu}m). These two-phase thermosets have improved toughness, similar to that of other rubber-modified epoxies, low water absorption, and low sodium content. In comparison to the unmodified thermosets, the two-phase thermosets exhibit slightly lower glass-transition temperatures and Young`s moduli, but their dielectric properties do not change. The epoxidized soybean oil is available at a price below that of commercial epoxy resins and appears very attractive for epoxy toughening on an industrial scale. 15 refs., 17 figs., 6 tabs.

  11. R5FORCE/MOD3s: A program to compute fluid induced forces using hydrodynamic output from the RELAP5/MOD3 code

    SciTech Connect

    Watkins, J.C.

    1990-09-01

    This report describes an update of a computer program which operates on hydrodynamic output from the RELAPS/MOD3 program and computes piping hydrodynamic force/time histories for input into various structural analysis codes. This version of the program is compatible with RELAPS/MOD3 and the Micro Vax computing environment whereas an earlier version of the program was compatible with RELAPS/MOD1. The report describes the force calculation theory, showing the development of a general force equation and the solution of this equation within the RELAPS output structure. To illustrate the calculational method and provide results for discussion, a sample problem is presented. A detailed user manual for the computer program is included as an appendix. 10 refs., 17 figs.

  12. Core analysis in a low permeability sandstone reservoir: Results from the Multiwell Experiment

    SciTech Connect

    Sattler, A.R.

    1989-04-01

    Over 4100 ft (1100 ft oriented) of Mesaverde core was taken during the drilling of the three Multiwell Experiment (MWX) wells, for study in a comprehensive core analysis program. This core traversed five separate depositional environments (shoreline/marine, coastal, paludal, fluvial, and paralic), and almost every major sand in the Mesaverde at the site was sampled. This paper summarizes MWX core analysis and describes the petrophysical properties at the MWX site; reservoir parameters, including permeabilities of naturally fractured core; and mechanical rock properties including stress-related measurements. Some correlations are made between reservoir properties and mineralogy/petrology data. Comparisons are made between the properties of lenticular and blanket sandstone morphologies existing at the site. This paper provides an overview of a complete core analysis in a low-permeability sandstone reservoir. 66 refs., 17 figs. , 9 tabs.

  13. Computerized training management system

    DOEpatents

    Rice, H.B.; McNair, R.C.; White, K.; Maugeri, T.

    1998-08-04

    A Computerized Training Management System (CTMS) is disclosed for providing a procedurally defined process that is employed to develop accreditable performance based training programs for job classifications that are sensitive to documented regulations and technical information. CTMS is a database that links information needed to maintain a five-phase approach to training-analysis, design, development, implementation, and evaluation independent of training program design. CTMS is designed using R-Base{trademark}, an-SQL compliant software platform. Information is logically entered and linked in CTMS. Each task is linked directly to a performance objective, which, in turn, is linked directly to a learning objective; then, each enabling objective is linked to its respective test items. In addition, tasks, performance objectives, enabling objectives, and test items are linked to their associated reference documents. CTMS keeps all information up to date since it automatically sorts, files and links all data; CTMS includes key word and reference document searches. 18 figs.

  14. Compilation of current literature on seals, closures, and leakage for radioactive material packagings

    SciTech Connect

    Warrant, M.M.; Ottinger, C.A.

    1989-01-01

    This report presents an overview of the features that affect the sealing capability of radioactive material packagings currently certified by the US Nuclear Regulatory Commission. The report is based on a review of current literature on seals, closures, and leakage for radioactive material packagings. Federal regulations that relate to the sealing capability of radioactive material packagings, as well as basic equations for leakage calculations and some of the available leakage test procedures are presented. The factors which affect the sealing capability of a closure, including the properties of the sealing surfaces, the gasket material, the closure method and the contents are discussed in qualitative terms. Information on the general properties of both elastomer and metal gasket materials and some specific designs are presented. A summary of the seal material, closure method, and leakage tests for currently certified packagings with large diameter seals is provided. 18 figs., 9 tabs.

  15. Velocity Measurements at Six Fish Screening Facilities in the Yakima River Basin, Washington, Summer 1988 : Annual Report.

    SciTech Connect

    Abernethy, C. Scott; Neitzel, Duane A.; Lusty, E. William

    1989-11-01

    The Bonneville Power Administration (BPA), the United States Bureau of Reclamation (USSR), and the Washington State Department of Ecology (WDOE) are funding the construction and evaluation of fish passage facilities and fish protection facilities at irrigation and hydroelectric diversions in the Yakima River Basin, Washington State. The program provides offsite enhancement to compensate for fish and wildlife losses caused by hydroelectric development throughout the Columbia River Basin, and addresses natural propagation of salmon to help mitigate the impact of irrigation in the Yakima River Basin. This report evaluates the flow characteristics of the screening facilities. Studies consisted of velocity measurements taken in front of the rotary drum screens and within the fish bypass systems during peak flows. Measurements of approach velocity and sweep velocity were emphasized in these studies; however, vertical velocity was also measured. 5 refs., 18 figs., 15 tabs.

  16. Growth, yield and plant water relationships in sweet potatoes in response to carbon dioxide enrichment: Progress report

    SciTech Connect

    Not Available

    1986-01-01

    In the summer of 1985, under the joint program of US Department of Energy, Carbon Dioxide Division, and Tuskegee University, experiments were conducted to study growth, yield, photosynthesis and plant water relationships in sweet potato plants grown in an enriched CO/sub 2/ environment. The main experiment utilized open top chambers to study the effects of CO/sub 2/ and soil moisture on growth, yield and photosynthesis of field-grown plants. In addition, potted plants in open top chambers were utilized in a study of the effects of different CO/sub 2/ concentrations on growth pattern, relative growth rate, net assimilation rate and biomass increment at different stages of development. The interaction effects of enriched CO/sub 2/ and water stress on biomass production, yield, xylem potential, and stomatal conductance were also investigated. 29 refs., 18 figs., 41 tabs.

  17. A parallel numerical simulation for supersonic flows using zonal overlapped grids and local time steps for common and distributed memory multiprocessors

    SciTech Connect

    Patel, N.R.; Sturek, W.B.; Hiromoto, R.

    1989-01-01

    Parallel Navier-Stokes codes are developed to solve both two- dimensional and three-dimensional flow fields in and around ramjet and nose tip configurations. A multi-zone overlapped grid technique is used to extend an explicit finite-difference method to more complicated geometries. Parallel implementations are developed for execution on both distributed and common-memory multiprocessor architectures. For the steady-state solutions, the use of the local time-step method has the inherent advantage of reducing the communications overhead commonly incurred by parallel implementations. Computational results of the codes are given for a series of test problems. The parallel partitioning of computational zones is also discussed. 5 refs., 18 figs.

  18. Composite polymer: Glass edge cladding for laser disks

    DOEpatents

    Powell, H.T.; Wolfe, C.A.; Campbell, J.H.; Murray, J.E.; Riley, M.O.; Lyon, R.E.; Jessop, E.S.

    1987-11-02

    Large neodymium glass laser disks for disk amplifiers such as those used in the Nova laser require an edge cladding which absorbs at 1 micrometer. This cladding prevents edge reflections from causing parasitic oscillations which would otherwise deplete the gain. Nova now utilizes volume-absorbing monolithic-glass claddings which are fused at high temperature to the disks. These perform quite well but are expensive to produce. Absorbing glass strips are adhesively bonded to the edges of polygonal disks using a bonding agent whose index of refraction matches that of both the laser and absorbing glass. Optical finishing occurs after the strips are attached. Laser disks constructed with such claddings have shown identical gain performance to the previous Nova disks and have been tested for hundreds of shots without significant degradation. 18 figs.

  19. Hydrogeology of parts of the Central Platte and Lower Loup Natural Resources Districts, Nebraska

    SciTech Connect

    Peckenpaugh, J.M.; Dugan, J.T.

    1983-01-01

    Water-level declines of at least 15 feet have occurred in this heavily irrigated area of central Nebraska since the early 1930's, and potential for additional declines is high. To test the effects of additional irrigation development on water levels and streamflow in the area, computer programs were developed that represent the surface-water system, soil zone, and saturated zone of the hydrogeologic system. A two-dimensional, finite difference ground-water flow model of the 3374 square-mile study area was developed and calibrated using steady-state and transient conditions, and three management alternatives were examined. Results indicate that significant additional water-level declines will occur even if there is no additional ground-water development. 35 refs., 18 figs., 22 tabs.

  20. Surface enhanced Raman gene probe and methods thereof

    DOEpatents

    Vo-Dinh, T.

    1998-02-24

    The subject invention disclosed is a new gene probe biosensor and methods based on surface enhanced Raman scattering (SERS) label detection. The SER gene probe biosensor comprises a support means, a SER gene probe having at least one oligonucleotide strand labeled with at least one SERS label, and a SERS active substrate disposed on the support means and having at least one of the SER gene probes adsorbed thereon. Biotargets such as bacterial and viral DNA, RNA and PNA are detected using a SER gene probe via hybridization to oligonucleotide strands complementary to the SER gene probe. The support means includes a fiberoptic probe, an array of fiberoptic probes for performance of multiple assays and a waveguide microsensor array with charge-coupled devices or photodiode arrays. 18 figs.

  1. Review of wire chamber aging

    SciTech Connect

    Va'Vra, J.

    1986-02-01

    This paper makes an overview of the wire chamber aging problems as a function of various chamber design parameters. It emphasizes the chemistry point of view and many examples are drawn from the plasma chemistry field as a guidance for a possible effort in the wire chamber field. The paper emphasizes the necessity of variable tuning, the importance of purity of the wire chamber environment, as well as it provides a practical list of presently known recommendations. In addition, several models of the wire chamber aging are qualitatively discussed. The paper is based on a summary talk given at the Wire Chamber Aging Workshop held at LBL, Berkeley on January 16-17, 1986. Presented also at Wire Chamber Conference, Vienna, February 25-28, 1986. 74 refs., 18 figs., 11 tabs.

  2. Confirmatory sediment analyses and solid and suspended particulate phase bioassays on sediment from Oakland Inner Harbor, San Francisco, California

    SciTech Connect

    Word, J.Q.; Ward, J.A.; Apts, C.W.; Woodruff, D.L.; Barrows, M.E.; Cullinan, V.I.; Hyland, J.L.; Campbell, J.F.

    1988-12-01

    The US Army Corps of Engineers (USACE), San Francisco District, was authorized by the US Congress to deepen the navigation channels of Inner and Outer Oakland Harbor, California. During review of the environmental impact statement required for this dredging and disposal project, a panel of national experts approved the open-water disposal of dredged sediment from selected areas within the Inner Harbor, subject to results of confirmatory solid phase bioassays. The San Francisco District of the Corps requested the Battle/Marine Sciences Laboratory (MSL) to conduct these confirmatory studies. The studies provided technical data for an evaluation of the potential environmental impact of this project. Within extremely narrow time constraints, these studies provided chemical and biological information required by ocean dumping regulations to determine suitability of the Oakland Inner Harbor and turning basin sediment for ocean disposal. 23 refs., 18 figs., 45 tabs.

  3. Monitoring of Olympic National Park Beaches to determine fate and effects of spilled bunker C fuel oil

    SciTech Connect

    Strand, J.A.; Cullinan, V.I.; Crecelius, E.A.; Fortman, T.J.; Citterman, R.J.; Fleischmann, M.L.

    1990-10-01

    On December 23, 1988, the barge Nestucca was accidentally struck by its tow, a Souse Brothers Towing Company tug, releasing approximately 230,000 gallons of Bunker C fuel oil and fouling beaches from Grays Harbor north to Vancouver Island. Affected beaches in Washington included a 40-mile-long strip that has been recently added to Olympic National Park. The purpose of the monitoring program documented in this report was to determine the fate of spilled Bunker C fuel oil on selected Washington coastal beaches. We sought to determine (1) how much oil remained in intertidal and shallow subtidal habitats following clean-up and weathering, (2) to what extent intertidal and/or shallow subtidal biotic assemblages have been contaminated, and (3) how rapidly the oil has left the ecosystem. 45 refs., 18 figs., 8 tabs.

  4. Model calculations and experimental measurements of the response of HMX porous beds to deflagration and shock

    SciTech Connect

    Aldis, D.F.; Lee, E.L.; Simpson, R.L.; Weston, A.M.

    1989-08-04

    The experimental research on the response of porous beds of HMX has yielded a body of evidence which includes accurate measurements of gas flow, compaction ratio, detonation transit distance and time. As the experimental research has progressed, we have developed a 1D numerical model (1DUCT) to describe this response in a special hydrodynamic code in which the gas phase is allowed to flow through a solid phase. Gas phase relative velocity is limited to be subsonic. In addition we have developed special constitutive and fluid EOS models (2DUCT) for use with the 2D Lagrange hydrocode, DYNA2D, in which there is no cell to cell gas phase mass transfer. Our study strategy was to analyze several, very different experiments to derive values of phenomenological parameters in the model. These experiments include squib ignited events where relative gas flow is important and compression ignition tests where it is not. 26 refs., 18 figs.

  5. Transport calculations for nuclear analyses: Theory and guidelines for effective use of transport codes

    SciTech Connect

    O'Dell, R.D.; Alcouffe, R.E.

    1987-09-01

    This report is for the serious user of discrete ordinates transport computer codes for performing nuclear analysis calculations. The first section after the introduction provides a reasonably thorough mathematical description of the analytic Boltzmann transport equation. Next is a section on the numerical discretization of the energy, angle, and space variables in the transport equation, along with an introduction to the source iteration method. The fourth section provides numerical details and features pertinent to discrete ordinates codes. That section details angular quadrature, spatial discretization methods, iteration acceleration methods, and search capabilities. The fifth section presents considerations in choosing a discrete ordinates code for use, and this is followed by a section on typical discrete ordinates codes available throughout the world. The report ends with some guidance for the user. 73 refs., 18 figs., 13 tabs.

  6. Towards an amplitude analysis of exclusive. gamma gamma. processes

    SciTech Connect

    Pennington, M.R.

    1988-06-01

    The potential of two photon processes to shed light on the parton content of resonances, we maintain, can only be realized in practice by moving towards an Amplitude Analysis of experimental data. By using the process ..gamma gamma.. ..-->.. ..pi pi.. as an example, the way to do this is discussed. Presently claimed uncertainties in the ..gamma gamma.. width of even the well-known f/sub 2/ (1270) are shown to be over-optimistic and the fitted couplings of the overlapping scalar states in the 1 GeV region meaningless. Only the use of Amplitude Analysis techniques on the new higher statistics data from SLAC and DESY can resolve these uncertainties and lead to definite and significant results. 37 refs., 18 figs.

  7. Low altitude high speed cargo parachute system development: A status report

    SciTech Connect

    Sundberg, W.D.; Alsbrooks, T.H.; Ronquillo, K.L. ); Sadeck, J.E.; Lee, C.K. )

    1991-01-01

    A Low Altitude High Speed Cargo (LAHSC) parachute is being developed for deployment at velocities up to 250 knots at 300 ft altitude. The LAHSC parachute will decelerate and turnover a load to a 40 to 60 ft/sec vertical velocity at first vertical at approximately 30 ft AGL. The acceleration limit is 5 g's. Main chute cargo extraction will be necessary. A single parachute will be utilized for a 7500 lb load, and clusters will be used for larger loads. The 64-gore, 70-ft-dia parachute has a ring-slot/solid construction with a flare at the skirt to aid the inflation. This paper describes the parachute, the design process and testing to date. Model parachutes have been tested in wind tunnels and in free flight. A single full-scale parachute has been tested at low speeds with conventional load extraction, and with a vertical trajectory at deployment. 5 refs., 18 figs., 3 tabs.

  8. Compact acoustic refrigerator

    DOEpatents

    Bennett, G.A.

    1992-11-24

    A compact acoustic refrigeration system actively cools components, e.g., electrical circuits, in a borehole environment. An acoustic engine includes first thermodynamic elements for generating a standing acoustic wave in a selected medium. An acoustic refrigerator includes second thermodynamic elements located in the standing wave for generating a relatively cold temperature at a first end of the second thermodynamic elements and a relatively hot temperature at a second end of the second thermodynamic elements. A resonator volume cooperates with the first and second thermodynamic elements to support the standing wave. To accommodate the high heat fluxes required for heat transfer to/from the first and second thermodynamic elements, first heat pipes transfer heat from the heat load to the second thermodynamic elements and second heat pipes transfer heat from first and second thermodynamic elements to the borehole environment. 18 figs.

  9. Application of a damage model for rock fragmentation to the Straight Creek Mine blast experiments

    SciTech Connect

    Thorne, B.J.

    1991-09-01

    Early attempts at estimation of stress wave damage due to blasting by use of finite element calculations met with limited success due to numerical instabilities that prevented calculations from being carried past the fragmentation limit. More recently, the improved damage model PRONTO has allowed finite element calculations which remain stable and yield good agreement between calculated fragmented regions and excavated crater profiles for blasting experiments in granite. Application of this damage model to blast experiments at the Straight Creek Mine in Bell County, Kentucky were complicated by anisotropic conditions and uncertainties in material properties. It appears that significant modifications to the damage model and extensive material testing may be necessary in order to estimate damage in these anisotropic materials. 18 refs., 18 figs.

  10. Recommendations report for the platanares geothermal site, Department of Copan, Honduras. Reporte de recomendaciones para el sitio geotermico de platanares, Departamento de Copan, Honduras

    SciTech Connect

    Not Available

    1988-11-01

    A geothermal assessment of six previously identified sites in Honduras has been conducted by a team comprised of staff from the Los Alamos National Laboratory, the US Geological Survey, and the Empresa Nacional de Energia Electrica. The application of both reconnaissance and detailed scale techniques lead to the selection of Platanares in the Department of Copan as the highest potential site. Additional work resulted in the completion of a prefeasibility study at Platanares. We present here a tabulation of the work completed and short summaries of the results from these technical studies. We also present a brief model of the geothermal system and recommendations for additional feasibility work. Both English and Spanish versions of this report are provided in the same document. 18 figs., 5 tabs.

  11. Introduction to string and superstring theory II

    SciTech Connect

    Peskin, M.E.

    1987-03-01

    Conformal field theory is reviewed, then conformal invariance is used to rederive the basic results on the embedding dimensionality for bosonic and fermionic strings. The spectrum of the bosonic and the computation of scattering amplitudes are discussed. The formalism used is extended to clarify the origin of Yang-Mills gauge invariance in the open bosonic string theory. The question of the general-coordinate gauge invariance of string theory is addressed, presenting two disparate viewpoints on this question. A brief introduction is then given of the reduction from the idealized string theory in 10 extended dimensions to more realistic solutions in which all but 4 of these dimensions are compactified. The state of knowledge about the space-time supersymmetry of the superstring from the covariant viewpoint is outlined. An approach for identifying possible 6-dimensional spaces which might represent the form of the compact dimensions is discussed, and the orbifold scheme of compactification is presented. 77 refs., 18 figs. (LEW)

  12. Chemically prepared varistor material for lightning arrestor connector application; Final report

    SciTech Connect

    Washington, W.; Goy, D.M.

    1989-08-30

    Chemically prepared (chem-prep) varistor material was evaluated as a possible replacement for mixed oxide material in varistor particle Lightning Arrestor Connectors (LACs). Chem-prep varistor materials were considered in the production of LACs for two reasons: (1) better production yields than the present mixed oxide materials as a result of controlled particle size, homogeneous mixing, and minimal in-process contamination; and (2) improved insulation resistance. The preparation of varistor material using chemical synthesis has proven to be successful in high-field varistors. The electrical properties can be set by adjusting the processing parameters, and the results can be reproduced. This suggests that new LAC material may be produced also using the chem-prep method. Based on initial studies, which included an evaluation of processing and electrical characterization, the chem-prep material showed very good promise as a replacement for the current LAC material. 1 ref., 18 figs., 16 tabs.

  13. Sidewall flow instabilities in liquid metal MHD flow under blanket relevant conditions

    SciTech Connect

    Reed, C.B.; Picologlou, B.F.

    1988-10-07

    A flow instability has been observed in a rectangular thin conducting wall duct in MHD experiments at ANL's ALEX facility. It developed in a side layer jet attached to a side wall parallel to the applied B-field. The nature of the instability resembles very strongly that of a classic laminar instability in ordinary fluid mechanics. The phenomenon is distinguished from ordinary turbulence by its strong periodicity and its lack of small scale structure. A preliminary identification of the factors which may influence the instability has been made. For the conditions and test section geometry reported here, the instability appears at an approximately constant critical Reynolds number 2650 < Re/sub cr/ < 5100, independent of Hartmann number in the range 2700 < M < 5400. 6 refs., 18 figs.

  14. Apparatus for improved DNA sequencing

    DOEpatents

    Douthart, R.J.; Crowell, S.L.

    1996-05-07

    This invention is a means for the rapid sequencing of DNA samples. More specifically, it consists of a new design direct blotting electrophoresis unit. The DNA sequence is deposited on a membrane attached to a rotating drum. Initial data compaction is facilitated by the use of a machined multi-channeled plate called a ribbon channel plate. Each channel is an isolated mini gel system much like a gel filled capillary. The system as a whole, however, is in a slab gel like format with the advantages of uniformity and easy reusability. The system can be used in different embodiments. The drum system is unique in that after deposition the drum rotates the deposited DNA into a large non-buffer open space where processing and detection can occur. The drum can also be removed in toto to special workstations for downstream processing, multiplexing and detection. 18 figs.

  15. Feed rate measuring method and system

    DOEpatents

    Novak, J.L.; Wiczer, J.J.

    1995-12-05

    A system and method are provided for establishing the feed rate of a workpiece along a feed path with respect to a machine device. First and second sensors each having first and second sensing electrodes which are electrically isolated from the workpiece are positioned above, and in proximity to the desired surfaces of the workpiece along a feed path. An electric field is developed between the first and second sensing electrodes of each sensor and capacitance signals are developed which are indicative of the contour of the workpiece. First and second image signals representative of the contour of the workpiece along the feed path are developed by an image processor. The time delay between corresponding portions of the first and second image signals are then used to determine the feed rate based upon the separation of the first and second sensors and the amount of time between corresponding portions of the first and second image signals. 18 figs.

  16. Superworlds/hyperworlds

    SciTech Connect

    Peskin, M.E.

    1986-03-01

    Some simple exercises are carried out which clarify the physics of a 5-dimensional world in which one dimension is curled up to a radius R. A technical problem necessary to generalize this discussion to d dimensions is considered - the determination of the sizes of spinors in higher dimensions. The origin of eigenmodes of a higher-dimensional field with exactly zero energy is explored, using as examples conventional models of field theory. General relativity is then reviewed, formulated as a gauge theory. The conditions for the appearance of zero modes in space-time geometries with compactified dimensions are discussed. The physics of these zero modes are illustrated in a series of examples ranging from the original construction of Kaluza and Klein to the superstring theory. 28 refs., 18 figs. (LEW)

  17. Intimations of neck formation in heavy-ion subbarrier fusion reactions

    SciTech Connect

    Stelson, P.H.

    1990-07-01

    Since the observed fusion cross sections for collisions between heavy ions at subbarrier energies are orders of magnitude larger than would be expected for barrier tunnelling, one is faced with the task of identifying the basic force which is strong enough to overcome the strong Coulomb force and bring about fusion. The two possibilities seem to be excursions of the nuclear surface (and strong nuclear force) due to collective motions of the colliding nuclei and formation of a neck of nuclear matter. The first possibility has received the most attention. However, the systematics of fusion cross sections suggest neck formation is playing an important role. Neck formation can also result in a reseparation of the composite system and we review the experimental information on these reactions at barrier and subbarrier energies. 15 refs., 18 figs.

  18. Decadal climate variability over the North Pacific and North America: Dynamics and predictability

    SciTech Connect

    Latif, M.; Barnett, T.P.

    1996-10-01

    The dynamics and predictability of decadal climate variability over the North Pacific and North America are investigated by analyzing various observation datasets and the output of a state of the art coupled ocean-atmosphere general circulation model that was integrated for 125 years. Both the observations and model results support the picture that the decadal variability in the regional of interest is based on a cycle involving unstable ocean-atmosphere interactions over the North Pacific. The period of this cycle is of the order of a few decades. The cycle involves the two major circulation regimes in the North Pacific climate system, the subtropical ocean gyre, and the Aleutian low. 41 refs., 18 figs.

  19. Surface enhanced Raman gene probe and methods thereof

    DOEpatents

    Vo-Dinh, T.

    1998-09-29

    The subject invention disclosed herein is a new gene probe biosensor and methods based on surface enhanced Raman scattering (SERS) label detection. The SER gene probe biosensor comprises a support means, a SER gene probe having at least one oligonucleotide strand labeled with at least one SERS label, and a SERS active substrate disposed on the support means and having at least one of the SER gene probes adsorbed thereon. Biotargets such as bacterial and viral DNA, RNA and PNA are detected using a SER gene probe via hybridization to oligonucleotide strands complementary to the SER gene probe. The support means supporting the SERS active substrate includes a fiberoptic probe, an array of fiberoptic probes for performance of multiple assays and a waveguide microsensor array with charge-coupled devices or photodiode arrays. 18 figs.

  20. Surface enhanced Raman gene probe and methods thereof

    DOEpatents

    Vo-Dinh, T.

    1998-07-21

    The subject invention disclosed is a new gene probe biosensor and methods based on surface enhanced Raman scattering (SERS) label detection. The SER gene probe biosensor comprises a support means, a SER gene probe having at least one oligonucleotide strand labeled with at least one SERS label, and a SERS active substrate disposed on the support means and having at least one of the SER gene probes adsorbed. Biotargets such as bacterial and viral DNA, RNA and PNA are detected using a SER gene probe via hybridization to oligonucleotide strands complementary to the SER gene probe. The support means supporting the SERS active substrate includes a fiberoptic probe, an array of fiberoptic probes for performance of multiple assays and a waveguide microsensor array with charge-coupled devices or photodiode arrays. 18 figs.

  1. Observations of the 40-50-day tropical oscillation - a review

    SciTech Connect

    Madden, R.A. ); Julian, P.R. )

    1994-05-01

    Observational aspects of the 40-50-day oscillation are reviewed. The oscillation is the result of large-scale circulation cells oriented in the equatorial plane that move eastward from at least the Indian Ocean to the central Pacific. Anomalies in zonal winds, and the velocity potential in the upper troposphere often propagate the full circumference of the globe. Related, complex convective regions also show an eastward movement. There is a zonally symmetric component to the oscillation. It is manifest in changes in surface pressure and in the relative atmospheric angular momentum. The oscillation is an important factor in the timing of active and break phases of the Indian and Australian monsoons. It affects ocean waves, currents, and air-sea interaction. The oscillation was particularly active during the First GARP (Global Atmospheric Research Program) Global Experiment year, and some features that were evident during the Monsoon Experiment are described. 126 refs., 18 figs., 2 tabs.

  2. Automation impact study of Army Training Management

    SciTech Connect

    Sanquist, T.F.; Schuller, C.R.; McCallum, M.C.; Underwood, J.A.; Bettin, P.J.; King, J.L.; Melber, B.D.; Hostick, C.J.; Seaver, D.A.

    1988-01-01

    The main objectives of this impact study were to identify the potential cost savings associated with automated Army Training Management (TM), and to perform a cost-benefit analysis for an Army-wide automated TM system. A subsidiary goal was to establish baseline data for an independent evaluation of a prototype Integrated Training Management System (ITMS), to be tested in the fall of 1988. A structured analysis of TM doctrine was performed for comparison with empirical data gathered in a job analysis survey of selected units of the 9ID (MTZ) at Ft. Lewis, Washington. These observations will be extended to other units in subsequent surveys. The survey data concerning staffing levels and amount of labor expended on eight distinct TM tasks were analyzed in a cost effectiveness model. The main results of the surveys and cost effectiveness modelling are summarized. 18 figs., 47 tabs.

  3. Investigation of effects of 60-Hz electric and magnetic fields on operant and social behavior and on the neuroendocrine system of nonhuman primates

    SciTech Connect

    Orr, J.L.

    1990-04-01

    The objective of this program is to investigate, using the baboon as a nonhuman primate surrogate for the human, behavioral and neuroendocrine effects associated with exposure to 60-Hz electric and magnetic fields. Results from this program, along with information from experiments conducted elsewhere, could be used to estimate and evaluate the likelihood of deleterious consequences resulting from exposure of humans to the electric and magnetic fields associated with electric power transmission. Activities this quarter extended those of the first project year: the modification of the facility to include 60-Hz magnetic fields, and development of the capability for studies of neuroendocrine parameters by obtaining blood samples from baboons during electric and magnetic field exposure. 18 figs., 7 tabs.

  4. Assessment of subsidence in karst terranes at selected areas in East Tennessee and comparison with a candidate site at Oak Ridge, Tennessee: Phase 2

    SciTech Connect

    Newton, J.G.; Tanner, J.M.

    1987-09-01

    Work in the respective areas included assessment of conditions related to sinkhole development. Information collected and assessed involved geology, hydrogeology, land use, lineaments and linear trends, identification of karst features and zones, and inventory of historical sinkhole development and type. Karstification of the candidate, Rhea County, and Morristown study areas, in comparison to other karst areas in Tennessee, can be classified informally as youthful, submature, and mature, respectively. Historical sinkhole development in the more karstified areas is attributed to the greater degree of structural deformation by faulting and fracturing, subsequent solutioning of bedrock, thinness of residuum, and degree of development by man. Sinkhole triggering mechanisms identified are progressive solution of bedrock, water-level fluctuations, piping, and loading. 68 refs., 18 figs., 11 tabs.

  5. Separation, fractionation, concentration and drying of food products: Final report, March 4, 1987--March 31, 1988

    SciTech Connect

    Merlo, C.A.; Rose, W.W.; Pedersen, L.D.; Brewbaker, P.L.

    1988-03-01

    This project studied energy efficient processes for separation, fractionation, concentration, drying, and recombination of food products, in order to reduce energy requirements for processing, preservation, and transportation. The project had three phases. In the laboratory-scale phase, results of which are summarized in this report, tomato puree was separated by three methods: conventional vacuum filtration, centrifugation, and crossflow microfiltration to produce pulp and serum. Three methods of recombination were examined: homogenizing, stomacher blending, and static (in-line) mixing. Satisfactory recombined purees were obtained. In addition, after centrifugation, the pulp was rinsed producing rinsed-pulp, and the rinse water was added to the serum producing rinse/serum. The rinse/serum was concentrated by evaporation. This was recombined with the rinsed-pulp and water producing satisfactory puree. 11 refs., 18 figs., 18 tabs.

  6. MP-Division health and safety reference handbook. [Contains glossary

    SciTech Connect

    Putnam, T.M.

    1987-09-01

    This report presents the objectives, organization, policies, and essential rules and procedures that have been adopted by MP Division and that form the basis of the Health and Safety Program of the Clinton P. Anderson Meson Physics Facility (LAMPF). The facility includes the beam-delivery systems for the Los Alamos Neutron Scattering Center and the Weapons Neutron Research Facility (LANSCE/WNR). The program is designed not only to assure the health and safety of all personnel, including users, in their work at LAMPF, and of MP-Division staff in their work on the LANSCE/WNR beam lines, but also to protect the facility (buildings and equipment) and the environment. 33 refs., 18 figs., 2 tabs.

  7. Methodologies for Assessing the Cumulative Environmental Effects of Hydroelectric Development of Fish and Wildlife in the Columbia River Basin, Volume 1, Recommendations, 1987 Final Report.

    SciTech Connect

    Stull, Elizabeth Ann

    1987-07-01

    This volume is the first of a two-part set addressing methods for assessing the cumulative effects of hydropower development on fish and wildlife in the Columbia River Basin. Species and habitats potentially affected by cumulative impacts are identified for the basin, and the most significant effects of hydropower development are presented. Then, current methods for measuring and assessing single-project effects are reviewed, followed by a review of methodologies with potential for use in assessing the cumulative effects associated with multiple projects. Finally, two new approaches for cumulative effects assessment are discussed in detail. Overall, this report identifies and reviews the concepts, factors, and methods necessary for understanding and conducting a cumulative effects assessment in the Columbia River Basin. Volume 2 will present a detailed procedural handbook for performing a cumulative assessment using the integrated tabular methodology introduced in this volume. 308 refs., 18 figs., 10 tabs.

  8. Determination of alternative fuels combustion products: Phase 2 final report

    SciTech Connect

    Whitney, K.A.

    1997-06-01

    This report describes the laboratory efforts to accomplish four independent tasks: (1) speciation of hydrocarbon exhaust emissions from a light-duty vehicle operated over the chassis dynamometer portion of the light-duty FTP after modifications for operation on butane and butane blends; (2) evaluation of NREL`s Variable Conductance Vacuum Insulated Catalytic Converter Test Article 4 for the reduction of cold-start FTP exhaust emissions after extended soak periods for a Ford FFV Taurus operating on E85; (3) support of UDRI in an attempt to define correlations between engine-out combustion products identified by SwRI during chassis dynamometer testing, and those found during flow tube reactor experiments conducted by UDRI; and (4) characterization of small-diameter particulate matter from a Ford Taurus FFV operating in a simulated fuel-rich failure mode on CNG, LPG, M85, E85, and reformulated gasoline. 22 refs., 18 figs., 17 tabs.

  9. Applications of pulsed neutron powder diffraction to actinide elements. [Pu-Al

    SciTech Connect

    Lawson, A.C.; Richardson, J.W.; Mueller, M.H.; Lander, G.H.; Goldstone, J.A.; Williams, A.; Kwei, G.H.; Von Dreele, R.B.; Faber, J. Jr.; Hitterman, R.L.

    1987-11-01

    We have been using the technique of pulsed neutron powder diffraction to study several problems in the physics and chemistry of the actinide elements. In these elements one often encounters very complex structures resulting from polymorphic transformations presumably induced by the presence of 5f-electrons. For example, at least five distinct structures of plutonium metal are found between room temperature and its melting point of 640/sup 0/C, and two of the structures are monoclinc. The determination of the crystal structure of beta-uranium (tetragonal, 30 atoms per unit cell) which has finnaly been shown to be centrosymmetric, after decades of uncertainty is discussed. Some preliminary results on the structure of alpha-plutonium (which confirm Zachariasen's original determination of the monoclinic structure) are presented. Pu-Al alloys were also studied. 12 refs., 18 figs.

  10. Institute of Geophysics and Planetary Physics at Lawrence Livermore National Laboratory: 1986 annual report

    SciTech Connect

    Max, C.E.

    1987-07-01

    The purpose of the Institute of Geophysics and Planetary Physics (IGPP) at LLNL is to enrich the opportunities of University of California campus researchers by making available to them some of the Laboratory's unique facilities and expertise, and to broaden the scientific horizon of LLNL researchers by encouraging collaborative or interdisciplinary work with other UC scientists. The IGPP continues to emphasize three fields of research - geoscience, astrophysics, and high-pressure physics - each administered by a corresponding IGPP Research Center. Each Research Center coordinates the mini-grant work in its field, and also works with the appropriate LLNL programs and departments, which frequently can provide supplementary funding and facilities for IGPP projects. 62 refs., 18 figs., 2 tabs.

  11. Leak checker data logging system

    DOEpatents

    Gannon, J.C.; Payne, J.J.

    1996-09-03

    A portable, high speed, computer-based data logging system for field testing systems or components located some distance apart employs a plurality of spaced mass spectrometers and is particularly adapted for monitoring the vacuum integrity of a long string of a superconducting magnets such as used in high energy particle accelerators. The system provides precise tracking of a gas such as helium through the magnet string when the helium is released into the vacuum by monitoring the spaced mass spectrometers allowing for control, display and storage of various parameters involved with leak detection and localization. A system user can observe the flow of helium through the magnet string on a real-time basis hour the exact moment of opening of the helium input valve. Graph reading can be normalized to compensate for magnet sections that deplete vacuum faster than other sections between testing to permit repetitive testing of vacuum integrity in reduced time. 18 figs.

  12. Assessment of RELAP5/MOD2 code using loss of offsite power transient data of KNU (Korea Nuclear Unit) No. 1 Plant

    SciTech Connect

    Chung, Bud-Dong; Kim, Hho-Jung . Korea Nuclear Safety Center); Lee, Young-Jin )

    1990-04-01

    This report presents a code assessment study based on a real plant transient that occurred on June 9, 1981 at the KNU {number sign}1 (Korea Nuclear Unit Number 1). KNU {number sign}1 is a two-loop Westinghouse PWR plant of 587 Mwe. The loss of offsite power transient occurred at the 77.5% reactor power with 0.5%/hr power ramp. The real plant data were collected from available on-line plant records and computer diagnostics. The transient was simulated by RELAP5/MOD2/36.05 and the results were compared with the plant data to assess the code weaknesses and strengths. Some nodalization studies were performed to contribute to developing a guideline for PWR nodalization for the transient analysis. 5 refs., 18 figs., 3 tabs.

  13. Response of hot nuclei

    SciTech Connect

    Broglia, R.A.

    1986-01-01

    The dipole giant resonance is reviewed, as it is the only vibration which has been experimentally identified in the decay of hot nuclei. The mechanism of exciting the resonance and the mode of the resonance are described. The methods used to calculate the vibrations from the shell model are discussed, including the Hartree-Fock approximation and random phase approximation. Nuclei formed by compound nuclear reactions, which possess high excitation energy and angular momentum, are considered. It is argued that the stability of the dipole may be used to advantage in the study of other properties of nuclei at high excitation. It is also considered possible that the discussion of the dipole giant resonance may be extended to the gamma decay of the isovector quadrupole vibration. 26 refs., 18 figs. (LEW)

  14. High-Yield Lithium-Injection Fusion-Energy (HYLIFE) reactor

    SciTech Connect

    Blink, J.A.; Hogam, W.J.; Hovingh, J.; Meier, E.R.; Pitts, J.H.

    1985-12-23

    The High-Yield Lithium-Injection Fusion Energy (HYLIFE) concept to convent inertial confinement fusion energy into electric power has undergone intensive research and refinement at LLNL since 1978. This paper reports on the final HYLIFE design, focusing on five major areas: the HYLIFE reaction chamber (which includes neutronics, liquid-metal jet-array hydrocynamics, and structural design), supporting systems, primary steam system and balance of plant, safety and environmental protection, and costs. An annotated bibliography of reports applicable to HYLIFE is also provided. We conclude that HYLIFE is a particularly viable concept for the safe, clean production of electrical energy. The liquid-metal jet array, HYLIFE's key design feature, protects the surrounding structural components from x-rays, fusion fuel-pellet debris, neutron damage and activation, and high temperatures and stresses, allowing the structure to last for the plant's entire 30-year lifetime without being replaced. 127 refs., 18 figs.

  15. Performance testing of radiobioassay laboratories: In vitro measurements (urinalysis): Final report

    SciTech Connect

    MacLellan, J.A.; Traub, R.J.; Fisher, D.R.

    1988-03-01

    This report provides results of the two-round nationwide in vitro bioassay intercomparison study. Conclusions were based on analyses by 35 bioassay laboratories of nearly 1400 artificial urine samples containing known quantities of radionuclides. The test radionuclides were H, /sup 89/Sr, /sup 238/Pu, /sup 241/Am, /sup 137/Cs, /sup 60/Co, and natural uranium. The data reported included background count rates, total samples counts, counting times, counting efficiencies, sample yields, and estimated errrors of the determinations. The measurement data were evaluated according to statistical methods presented in the November 1985 version of the draft ANSI Standard N13.30. If a laboratory failed a performance test for any one of the three criteria, the laboratory was considered to have failed the test for that category. 22 refs., 18 figs., 14 tabs

  16. Cavity dimensions for high velocity penetration events: A comparison of calculational results with data

    SciTech Connect

    Kmetyk, L.N.; Yarrington, P.

    1989-05-01

    Calculations were performed with the CTH and HULL finite difference wavecodes to evaluate computational capabilities for predicting depth and diameter of target cavities produced in high velocity penetration events. The calculations simulated selected tests in a set of armor penetration experiments conducted by the US Army Ballistic Research Laboratory and reported earlier in the literature. The tests and simulations involved penetration of semi-infinite targets by long rod projectiles over a range of impact velocities from 1.3 to 4.5 km/sec. Comparisons are made between the calculated and measured dimensions of the target cavities, and the sensitivity of the predicted results to target property variations is investigated. 9 refs., 18 figs., 3 tabs.

  17. Mean surface water balance over Africa and its interannual variability

    SciTech Connect

    Nicholson, S.E.; Kim, J.; Ba, M.B.; Lare, A.R.

    1997-12-01

    This article presents calculations of surface water balance for the African continent using a revised version of the Lettau climatonomy. Calculations are based on approximately 1400 rainfall stations, with records generally covering 60 yr or longer. Continental maps of evapotranspiration. runoff, and soil moisture are derived for January, July, and the annual mean. The model is also used to provide a gross estimate of the interannual variability of these parameters over most of the continent and local water balance calculations for a variety of locations in Africa. The results are compared with four other comprehensive global water balance studies. The results of this study are being used to produce a gridded dataset for the continent, with potential applications for numerical modeling studies. 50 refs., 18 figs., 3 tabs.

  18. Spontaneous emergence of a metabolism

    SciTech Connect

    Bagley, R.J.; Farmer, J.D. Santa Fe Inst., NM )

    1990-01-01

    Networks of catalyzed reactions with nonlinear feedback have been proposed to play an important role in the origin of life. We investigate this possibility in a polymer chemistry with catalyzed cleavage and condensation reactions. We study the properties of a well-stirred reactor driven away from equilibrium by the flow of mass. Under appropriate non-equilibrium conditions. The nonlinear feedback of the reaction network focuses the material of the system into a few specific polymer species. The network of catalytic reactions digests'' the material of its environment, incorporating it into its own form. We call the result an autocatalytic metabolism. Under some variations it persists almost unchanged, while in other cases it dies. We argue that the dynamical stability of autocatalytic metabolisms gives them regenerative properties that allow them to repair themselves and to propagate through time. 43 refs., 16 figs., 3 tabs.

  19. Alkali-support interactions on rubidium base catalysts determined by XANES, EXAFS, CO{sub 2} adsorption, and IR spectroscopy

    SciTech Connect

    Doskocil, E.J.; Bordawekar, S.V.; Davis, R.J.

    1997-07-01

    Rubidium was supported on a variety of catalyst supports, including magnesia, titania, alumina, carbon, and silica. Except for Rb/MgO, none of the oxide-based samples contained surface carbonates as detected by IR spectroscopy after pretreatment at 773 K. The XANES and EXAFS associated with the Rb K edge indicated that the local structure around Rb was highly dependent on the support composition. Results from CO{sub 2} stepwise TPD showed that Rb/MgO possessed strongly basic sites that were not present on pure MgO. The basic sites formed by Rb addition to the other supports were weaker than those on Rb/MgO. Decomposition of 2-propanol at 593 K was used to relate catalytic activity to surface basicity. 40 refs., 16 figs., 4 tabs.

  20. Modeling of dilute two-phase multispecies solid/gas flows

    SciTech Connect

    Doss, E.D.; Srinivasan, M.G.; Raptis, A.C.

    1986-06-01

    The report gives a detailed description of the analytical modeling that underlies the numerical code for predicting the flow of dilute solid/gas flows in pipes. The model is two-phase multispecies. Particles of one size are treated as one species and the equations of particle dynamics include terms to account for momentum transfer between species and the wall friction on each species of particles. New expressions for particle/particle interaction and wall friction for multispecies flow are derived. Results of parametric studies based on the new expressions are described. The predictions of this model for gas/powder flow through a venturi are compared with experimental measurements. The model's capability for predicting the flow in Argonne's Solid/Gas Flow Test Facility will be the subject of a companion report. 26 refs., 16 figs.

  1. Oak Ridge Reservation environmental report for 1989

    SciTech Connect

    Jacobs, V.A.; Wilson, A.R.

    1990-10-01

    The first two volumes of this report are devoted to a presentation of environmental data and supporting narratives for the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) and surrounding environs during 1989. Volume 1 includes all narrative descriptions, summaries, and conclusions and is intended to be a stand-alone'' report for the ORR for the reader who does not want to review in detail all of the 1989 data. Volume 2 includes the detailed data summarized in a format to ensure that all environmental data are represented in the tables. Narratives are not included in Vol. 2. The tables in Vol. 2 are addressed in Vol. 1. For this reason, Vol. 2 cannot be considered a stand-alone report but is intended to be used in conjunction with Vol. 1. 16 figs., 194 tabs.

  2. Morphology and morphogenesis of arenaviruses*

    PubMed Central

    Murphy, Frederick A.; Whitfield, Sylvia G.

    1975-01-01

    Arenaviruses have unique structural characteristics; they are pleomorphic, have a mean diameter of 110-130 nm, and consist of a membranous envelope with surface projections surrounding an interior containing ribosomes and filaments. Virus particles bud from plasma membranes of infected cells and in many cases large intracytoplasmic inclusion bodies are formed. These characteristics allow generic identification, but not differentiation of individual viruses. Ultrastructural identification of virus particles and pathological processes in infected tissues of man and experimental animals is important in understanding the nature of arenaviral pathogenesis Such identification also contributes to our understanding of the mechanisms of viral shedding and transmission in reservoir host species. ImagesFig. 3Fig. 4Fig. 5Fig. 11Fig. 12Fig. 13Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 1Fig. 2Fig. 14Fig. 15Fig. 16Fig. 17 PMID:182396

  3. Savannah River Laboratory Seepage Basins: Waste site assessment report

    SciTech Connect

    Haselow, J.S.; Looney, B.B.; Nichols, R.L.

    1989-09-05

    This Waste Site Assessment for the SRL Seepage Basins is the second in a series of documents being prepared to support development of an appropriate closure plan for these basins. The closure of these basins will be designed to provide protection to human health and the environment and to meet the provisions of the Consent Decree. A Technical Data Summary for these basins has already been submitted as part of the Consent Decree. This Site Assessment Report includes a waste site characterization, and a discussion of closure options for the basins. A closure option is recommended in this report, but details of the recommended closure are not provided in this report since they will be provided in a subsequent closure plan. The closure plan is the third document required under the Consent Decree. 18 refs., 16 figs., 10 tabs.

  4. Effects of coal rank on the chemical composition and toxicological activity of coal liquefaction materials

    SciTech Connect

    Wright, C.W.; Dauble, D.D.

    1986-05-01

    This report presents data from the chemical analysis and toxicological testing of coal liquefaction materials from the EDS and H-Coal processes operated using different ranks of coal. Samples of recycle solvent from the bottoms recycle mode of the EDS direct coal liquefaction process derived from bituminous, sub-bituminous, and lignite coals were analyzed. In addition, the H-Coal heavy fuel oils derived from bituminous and sub-bituminous coals were analyzed. Chemical methods of analysis included adsoprtion column chromatography, high-resolution gas chromatography, gas chromatography/mass spectrometry, and low-voltage probe-inlet mass spectrometry. The toxicological activity of selected samples was evaluated using the standard microbial mutagenicity assay, an initiation/promotion assay for mouse-skin tumorigenicity, and a static bioassy with Daphnia magna for aquatic toxicity of the water-soluble fractions. 22 refs., 16 figs., 14 tabs.

  5. Spent nuclear fuel removal program at the West Valley Demonstration Project: Topical report

    SciTech Connect

    Connors, B. J.; Golden, M. P.; Valenti, P. J.; Winkel, J. J.

    1987-03-01

    The spent nuclear fuel removal program at the West Valley Demonstration Project (WVDP) consisted of removing the spent nuclear fuel (SNF) assemblies from the storage pool in the plant, loading them in shielded casks, and preparing the casks for transportation. So far, four fuel removal campaigns have been completed with the return of 625 spent nuclear fuel assemblies to their four utility owners. A fifth campaign, which is not yet completed, will transfer the remaining 125 fuel assemblies to a government site in Idaho. A spent fuel rod consolidation demonstration has been completed, and the storage canisters and their racks are being removed from the fuel receiving and storage pool to make way for installation of the size reduction equipment. A brief history of the West Valley reprocessing plant and the events leading to the storage and ownership of the spent nuclear fuel assemblies and their subsequent removal from West Valley are also recorded as background information. 3 refs., 16 figs., 9 tabs.

  6. Design and fabrication of an integrated bonding system for tape processing of slapper detonator cables

    SciTech Connect

    Schurman, W.R.

    1986-08-15

    A unique bonding system was designed and built as an addition to the other reel-to-reel processing equipment in the Tape Process Laboratory at Mound. This bonder supports an in-house flexible circuit manufacturing capability which has been established by Mound's Tape Processing Group. This bonder, like most of the equipment in the Tape Process Laboratory, was designed and built to Mound's specifications. This bonding system integrates into one machine all operations necessary to prepare, bond, and test the joint between a flexible printed circuit cable and an etched (copper/Kapton) bridge. Design specifications were established for all operations (cable cleaning, assembly, bonding, resistance testing, vacuum stress test, and closed circuit TV inspection). The design concepts used for the design of the Integrated Bonding System provided for the bonding of different detonator cables and bridge designs with minimal tooling changes. 16 figs.

  7. Feasibility study for a transportation operations system cask maintenance facility

    SciTech Connect

    Rennich, M.J.; Medley, L.G.; Attaway, C.R.

    1991-01-01

    The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a waste management program for the disposition of spent nuclear fuel (SNF) and high-level waste (HLW). The program will include a transportation system for moving the nuclear waste from the sources to a geologic repository for permanent disposal. Specially designed casks will be used to safely transport the waste. The cask systems must be operated within limits imposed by DOE, the Nuclear Regulatory Commission (NRC), and the Department of Transportation (DOT). A dedicated facility for inspecting, testing, and maintaining the cask systems was recommended by the General Accounting Office (in 1979) as the best means of assuring their operational effectiveness and safety, as well as regulatory compliance. In November of 1987, OCRWM requested a feasibility study be made of a Cask Maintenance Facility (CMF) that would perform the required functions. 46 refs., 16 figs., 13 tabs.

  8. Processes to remove acid forming gases from exhaust gases

    DOEpatents

    Chang, S.G.

    1994-09-20

    The present invention relates to a process for reducing the concentration of NO in a gas, which process comprises: (A) contacting a gas sample containing NO with a gaseous oxidizing agent to oxidize the NO to NO[sub 2]; (B) contacting the gas sample of step (A) comprising NO[sub 2] with an aqueous reagent of bisulfite/sulfite and a compound selected from urea, sulfamic acid, hydrazinium ion, hydrazoic acid, nitroaniline, sulfanilamide, sulfanilic acid, mercaptopropanoic acid, mercaptosuccinic acid, cysteine or combinations thereof at between about 0 and 100 C at a pH of between about 1 and 7 for between about 0.01 and 60 sec; and (C) optionally contacting the reaction product of step (A) with conventional chemical reagents to reduce the concentrations of the organic products of the reaction in step (B) to environmentally acceptable levels. Urea or sulfamic acid are preferred, especially sulfamic acid, and step (C) is not necessary or performed. 16 figs.

  9. Two-dimensional water quality modeling of Town Creek embayment on Guntersville Reservoir

    SciTech Connect

    Bender, M.D.; Shiao, Ming C.; Hauser, G.E. . Engineering Lab.); Butkus, S.R. . Water Quality Dept.)

    1990-09-01

    TVA investigated water quality of Town Creek embayment using a branched two-dimensional model of Guntersville Reservoir. Simulation results were compared in terms of algal biomass, nutrient concentrations, and volume of embayment with depleted dissolved oxygen. Stratification and flushing play a significant role in the embayment water quality. Storms introduce large loadings of organics, nutrients, and suspended solids. Dissolved oxygen depletion is most severe after storms followed by low flow that fails to flush the embayment. Embayment water quality responses to potential animal waste and erosion controls were explored. Modeling indicated animal waste controls were much more cost-effective than erosion controls. Erosion controls will decrease embayment suspended solids and thereby increase algal biomass due to greater light penetration. 29 refs., 16 figs., 4 tabs.

  10. Los Alamos National Laboratory corregated metal pipe saw facility preliminary safety analysis report. Volume I

    SciTech Connect

    1990-09-19

    This Preliminary Safety Analysis Report addresses site assessment, facility design and construction, and design operation of the processing systems in the Corrugated Metal Pipe Saw Facility with respect to normal and abnormal conditions. Potential hazards are identified, credible accidents relative to the operation of the facility and the process systems are analyzed, and the consequences of postulated accidents are presented. The risk associated with normal operations, abnormal operations, and natural phenomena are analyzed. The accident analysis presented shows that the impact of the facility will be acceptable for all foreseeable normal and abnormal conditions of operation. Specifically, under normal conditions the facility will have impacts within the limits posted by applicable DOE guidelines, and in accident conditions the facility will similarly meet or exceed the requirements of all applicable standards. 16 figs., 6 tabs.

  11. Effects of neutron irradiation on thermal conductivity of SiC-based composites and monolithic ceramics

    SciTech Connect

    Senor, D.J.; Youngblood, G.E.; Moore, C.E.; Trimble, D.J.; Newsome, G.A.; Woods, J.J.

    1996-12-31

    A variety of SiC-based composites and monolithic ceramics were characterized by measuring their thermal diffusivity in the unirradiated, thermal annealed, and irradiated conditions over the temperature range 400 to 1000{degree}C. The irradiation was conducted in the FBR-II to doses of 33 and 43 dpa-SiC at a nominal temperature of 1000{degree}C. The annealed specimens were held at 1010{degree}C for 165 days to approximately duplicate the thermal exposure of the irradiated specimens. Thermal diffusivity was measured using the laser flash method, and was converted to thermal conductivity using density data and calculated specific heat values. 24 refs., 16 figs., 1 tab.

  12. Carrier transport and collection in fully depleted semiconductors by a combined action of the space charge field and the field due to electrode voltages

    DOEpatents

    Rehak, P.; Gatti, E.

    1987-08-18

    A semiconductor charge transport device and method for making same are disclosed, characterized by providing a thin semiconductor wafer having rectifying junctions on its opposing major surfaces and including a small capacitance ohmic contact, in combination with bias voltage means and associated circuit means for applying a predetermined voltage to effectively deplete the wafer in regions thereof between the rectifying junctions and the ohmic contact. A charge transport device of the invention is usable as a drift chamber, a low capacitance detector, or a charge coupled device each constructed according to the methods of the invention for making such devices. Detectors constructed according to the principles of the invention are characterized by having significantly higher particle position indicating resolution than is attainable with prior art detectors, while at the same time requiring substantially fewer readout channels to realize such high resolution. 16 figs.

  13. Health effects of air pollution due to coal combustion in the Chestnut Ridge region of Pennsylvania

    SciTech Connect

    Batterman, S.; Golomb, D.

    1985-08-01

    This study used the seventeen monitor air quality network in the Chestnut Ridge region of Pennsylvania to evaluate the effect of pollutant trends and representations on measures of exposure. Data consisted of four and five years of SO/sub 2/ and TSP measurements, respectively, and were considered in deriving exposure models. A cross-sectional study of 4071 children aged 6 to 11 years of age was conducted in the spring of 1979. Standardized children's questionnaires were distributed to the parents and returned by the children to school, where spirometry was performed. The region was divided into low, moderate and high pollution areas on the basis of the 1974-1978, 3 h, 24 h, and annual averages for SO/sub 2/. After adjusting the respiratory symptom response outcomes and the pulmonary function levels for known predictors, no significant association was noted for level of SO/sub 2/. 65 refs., 16 figs., 19 tabs.

  14. The effects of viscous forces on three-phase relative permeability

    SciTech Connect

    Maloney, D.R.; Mahmood, S.M.; Honarpour, M.M.

    1989-04-01

    The overall objective of Three-Phase Relative Permeability Project (BE9) is to develop guidelines for improving the accuracy of three-phase relative permeability determinations. This report summarizes previous studies and explains the progress made at NIPER on studying the effect of variations in viscous forces on three-phase relative permeabilities by changing the viscosity of both wetting and nonwetting phases. Significant changes were observed due to viscosity variations. An increase in oil viscosity reduced the relative permeability to gas; an increase in brine/(wetting-phase) viscosity reduced the relative permeability to brine. A slight increase in gas relative permeability was also observed. These observations suggest that the viscosities of both oil and water influence three-phase permeability data. During this study, data scatter was sometimes encountered which was comparable to that of published results. The causes of this scatter are outlined in this report and remedial attempts are discussed. 20 refs., 16 figs., 5 tabs.

  15. Trends in radionuclide concentrations for selected wildlife and food products near the Hanford Site from 1971 through 1988

    SciTech Connect

    Eberhardt, L.E.; Cadwell, L.L.; Price, K.R.; Carlile, D.W.; Alaska Dept. of Fish and Game, Juneau, AK )

    1989-09-01

    From 1971 through 1988 at least 40 species of wildlife and 27 different types of food products were collected and analyzed for radionuclides as part of the Pacific Northwest Laboratory (PNL) Environmental Monitoring Program. This report summarizes the results of these analyses for sample types collected for all or most of the 18-year period. The objectives of this summary investigation were to identify long-term trends or significant year-to-year changes in radionuclide concentrations and, if possible, relate any observed changes in radionuclide concentrations to their sources and probable causes. Statistical techniques were employed to test for long-term trends. Conspicuous short-term changes in radionuclide concentrations were identified from inspection of the data. 30 refs., 16 figs., 4 tabs.

  16. New method to determine Angstrom`s turbidity coefficient: Its application for Valencia

    SciTech Connect

    Pinazo, J.M.; Canada, J.; Bosca, J.V.

    1995-04-01

    Traditionally the Angstrom turbidity coefficient has been derived from either spectral direct solar radiation measurements or broadband direct solar radiation and precipitable water measurements. The new method for calculating the Angstrom turbidity coefficient presented here is based on the ratio of direct solar radiation to global solar radiation on a horizontal surface and on the `C` model of Iqbal. For this method, it is not necessary to know the precipitable water and the ozone content of the atmosphere. The results of the present model are compared against those of a prior study using experimental data measured at Valencia during 1989-1990. Finally, a graphic method to calculate $beta for any location and standard meteorological conditions is presented. 8 refs., 16 figs., 2 tabs.

  17. An atom probe study of phase decomposition in three iron meteorites

    SciTech Connect

    Miller, M.K.; Russell, K.F.

    1989-01-01

    An atom probe field-ion microscopy characterization of the Cape York, Twin City and Santa Catharina iron-nickel meteorites has been performed. This investigation has revealed that the taenite, corresponding to an interface region between the cloudy zone and the clear taenite 2 (CT2) region in the Cape York meteorite and the matrix of the Twin City and Santa Catharina meteorites, has phase separated to form an ultra-fine scale duplex microstructure. The composition of these two phases was determined to be 50 at. % Ni and approximately 15 at. % Ni. These compositions correspond to the equiatomic FeNi L1/sub 0/-ordered phase and a disordered face centered cubic phase. 38 refs., 16 figs., 3 tabs.

  18. LaNi{sub 5}-based metal hydride electrode in Ni-MH rechargeable cells

    DOEpatents

    Bugga, R.V.; Fultz, B.; Bowman, R.; Surampudi, S.R.; Witham, C.K.; Hightower, A.

    1999-03-30

    An at least ternary metal alloy of the formula AB{sub (Z-Y)}X{sub (Y)} is disclosed. In this formula, A is selected from the rare earth elements, B is selected from the elements of Groups 8, 9, and 10 of the Periodic Table of the Elements, and X includes at least one of the following: antimony, arsenic, germanium, tin or bismuth. Z is greater than or equal to 4.8 and less than or equal to 6.0. Y is greater than 0 and less than 1. Ternary or higher-order substitutions to the base AB{sub 5} alloys that form strong kinetic interactions with the predominant metals in the base metal hydride are used to form metal alloys with high structural integrity after multiple cycles of hydrogen sorption. 16 figs.

  19. Method of holding optical elements without deformation during their fabrication

    DOEpatents

    Hed, P.P.

    1997-04-29

    An improved method for securing and removing an optical element to and from a blocking tool without causing deformation of the optical element is disclosed. A lens tissue is placed on the top surface of the blocking tool. Dots of UV cement are applied to the lens tissue without any of the dots contacting each other. An optical element is placed on top of the blocking tool with the lens tissue sandwiched therebetween. The UV cement is then cured. After subsequent fabrication steps, the bonded blocking tool, lens tissue, and optical element are placed in a debonding solution to soften the UV cement. The optical element is then removed from the blocking tool. 16 figs.

  20. Improving the stability of coal slurries. Quarterly progress report, March 15-June 15, 1986. [Sedimentation tests in the presence and absence of gum tragacanth

    SciTech Connect

    Fogler, H.S.

    1986-01-01

    In this report, we will describe the progress of our research in two key areas. The twin objectives of this research are: (a) to examine the effectiveness of hydrocolloids as stabilizers of coal-water slurries and (b) to gain an understanding of the mechanism of stabilization through the use of monodisperse polystyrene lattices as model systems. Sedimentation tests with ultrafine ground coal in presence and absence of gum tragacanth have been carried out. An isotherm of gum tragacanth binding to coal surface has been generated. We have also conducted rheological studies to characterize the stabilized coal-water slurries. Similar experiments with -200 mesh coal are currently under way. In the case of model system studies, the effect of article size on the gum tragacanth induced stability has been studied. Initial experiments on the effects of increased electrolyte concentration and the addition of nonsolvents like ethanol to the continuous phase have been undertaken. 9 refs., 16 figs., 1 tab.

  1. Constant field gradient planar coupled cavity structure

    DOEpatents

    Kang, Y.W.; Kustom, R.L.

    1999-07-27

    A cavity structure is disclosed having at least two opposing planar housing members spaced apart to accommodate the passage of a particle beam through the structure between the members. Each of the housing members have a plurality of serially aligned hollows defined therein, and also passages, formed in the members, which interconnect serially adjacent hollows to provide communication between the hollows. The opposing planar housing members are spaced and aligned such that the hollows in one member cooperate with corresponding hollows in the other member to form a plurality of resonant cavities aligned along the particle beam within the cavity structure. To facilitate the obtaining of a constant field gradient within the cavity structure, the passages are configured so as to be incrementally narrower in the direction of travel of the particle beam. In addition, the spacing distance between the opposing housing members is configured to be incrementally smaller in the direction of travel of the beam. 16 figs.

  2. Generative inspection process planner for integrated production

    SciTech Connect

    Brown, C.W. . Kansas City Div.); Gyorog, D.A. . Dept. of Mechanical Engineering)

    1990-04-01

    This work describes the design prototype development of a generative process planning system for dimensional inspection. The system, IPPEX (Inspection Process Planning EXpert), is a rule-based expert system for integrated production. Using as advanced product modeler, relational databases, and artificial intelligence techniques, IPPEX generates the process plan and part program for the dimensional inspection of products using CMMs. Through an application interface, the IPPEX system software accesses product definition from the product modeler. The modeler is a solid geometric modeler coupled with a dimension and tolerance modeler. Resource data regarding the machines, probes, and fixtures are queried from databases. IPPEX represents inspection process knowledge as production rules and incorporates an embedded inference engine to perform decision making. The IPPEX system, its functional architecture, system architecture, system approach, product modeling environment, inspection features, inspection knowledge, hierarchical planning strategy, user interface formats, and other fundamental issues related to inspection planning and part programming for CMMs are described. 27 refs., 16 figs., 4 tabs.

  3. A flammability and combustion model for integrated accident analysis. [Advanced light water reactors

    SciTech Connect

    Plys, M.G.; Astleford, R.D.; Epstein, M. )

    1988-01-01

    A model for flammability characteristics and combustion of hydrogen and carbon monoxide mixtures is presented for application to severe accident analysis of Advanced Light Water Reactors (ALWR's). Flammability of general mixtures for thermodynamic conditions anticipated during a severe accident is quantified with a new correlation technique applied to data for several fuel and inertant mixtures and using accepted methods for combining these data. Combustion behavior is quantified by a mechanistic model consisting of a continuity and momentum balance for the burned gases, and considering an uncertainty parameter to match the idealized process to experiment. Benchmarks against experiment demonstrate the validity of this approach for a single recommended value of the flame flux multiplier parameter. The models presented here are equally applicable to analysis of current LWR's. 21 refs., 16 figs., 6 tabs.

  4. Low-cost CuInSe{sub 2} submodule development. Final subcontract report, 9 July 1990--31 January 1992

    SciTech Connect

    Basol, B.M.; Kapur, V.K.; Halani, A.; Leidholm, C.

    1992-10-01

    Aim of this project is development and demonstration of processing steps necessary for fabrication of high efficiency CuInSe{sub 2} solar cells and sub-modules by the two-stage technique (also called the selenization method.) During this period, we have optimized the processing parameters of this method and demonstrated CuInSe{sub 2}/CdS/ZnO devices with a 1{endash}4 cm{sup 2} area and up to 12.4% active area efficiency. We have also developed a novel approach for the preparation of Cu/In precursors that improved the stoichiometric and morphological uniformity in these films. We have developed processing steps and tooling for handling up to 1 ft{sup 2} size substrates and as a result of these efforts demonstrated our first monolithically integrated sub-module of 1 ft{sup 2} area. 16 figs, 1 tab, 15 refs.

  5. Low-cost CuInSe[sub 2] submodule development

    SciTech Connect

    Basol, B.M.; Kapur, V.K.; Halani, A.; Leidholm, C. )

    1992-10-01

    Aim of this project is development and demonstration of processing steps necessary for fabrication of high efficiency CuInSe[sub 2] solar cells and sub-modules by the two-stage technique (also called the selenization method.) During this period, we have optimized the processing parameters of this method and demonstrated CuInSe[sub 2]/CdS/ZnO devices with a 1[endash]4 cm[sup 2] area and up to 12.4% active area efficiency. We have also developed a novel approach for the preparation of Cu/In precursors that improved the stoichiometric and morphological uniformity in these films. We have developed processing steps and tooling for handling up to 1 ft[sup 2] size substrates and as a result of these efforts demonstrated our first monolithically integrated sub-module of 1 ft[sup 2] area. 16 figs, 1 tab, 15 refs.

  6. Alpha-beta radiation detector

    DOEpatents

    Fleming, D.M.; Simmons, K.L.; Froelich, T.J.; Carter, G.L.

    1998-08-18

    The invention is based in part on the discovery that a plastic housing that is lightweight is surprisingly efficient inasmuch as background signals from any gamma radiation are significantly reduced by using a plastic housing instead of a metal housing. A further aspect of the present invention is the profile of the housing as a bi-linear approximation to a parabola resulting in full optical response from any location on the scintillation material to the photomultiplier tube. A yet further aspect of the present invention is that the survey probe is resistant to magnetic fields. A yet further aspect of the present invention is the use of a snap-fit retaining bracket that overcomes the need for multiple screws. 16 figs.

  7. Fixed-bed gasification research using US coals. Volume 5. Gasification of Stahlman Stoker bituminous coal

    SciTech Connect

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-03-31

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial participants and governmental agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) Group. This report is the fifth volume in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. This specific report describes the gasification of Stahlman Stoker bituminous coal from Clarion County, PA. The period of the gasification test was April 30 to May 4, 1983. 4 refs., 16 figs., 10 tabs.

  8. Dynamical processes in heavy ion reactions

    SciTech Connect

    Blann, M.; Remington, B.A.

    1988-07-25

    In this report I review the physical assumptions of the Boltzmann Master Equation (BME). Comparisons of the model with experimental neutron spectra gated on evaporation residues for a range of incident projectile energies and masses are presented; next, I compare n spectra gated on projectile-like fragments, followed by comparisons with ungated, inclusive proton spectra. I will then consider secondary effects from the nucleon-nucleon processes involved in the heavy ion relaxation processes, specifically the high energy ..gamma..-rays which have been observed at energies up to 140 MeV in collisions of heavy ions of 20/endash/84 MeV/..mu... Another secondary effect, subthreshold pion production, was covered in the XVII School and will not be repeated. 39 refs., 16 figs.

  9. Phenodynamics of production and chemical pools in mayapple and flowering dogwood

    SciTech Connect

    Taylor, F.G. Jr.

    1991-01-01

    The objective of this study is to provide an understanding of the seasonality of biomass production and chemical storage among selected forest species as an aid to the analysis and management of a forest ecosystem model. The specific goals to accomplish the objectives included: (1) the construction of phenological calendars to be superimposed on the civil calendar, such that the seasons of the year are not marked by calendar dates but rather by dated groups of phenological events; (2) to develop a capability to predict onset of the generative phase (flowering) from heat unit summation methods; (3) to illustrate the role of phenology to biomass production and chemical storage in two indicator species, mayapple and flowering dogwood; and (4) to develop the capability to predict aboveground and below ground standing crop biomass in dogwood. Observations in this study focused on the generative phases (flowering) of individual plants and colonies of plants as indicators of productivity. 16 figs., 11 tabs.

  10. Petroleum supply monthly, May 1998, with data for March 1998

    SciTech Connect

    1998-05-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 16 figs., 66 tabs.

  11. Petroleum supply monthly, November 1996 with data for September 1996

    SciTech Connect

    1996-11-01

    Data presented in this report describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products fin the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  12. Two-axis tracking solar collector mechanism

    DOEpatents

    Johnson, K.C.

    1992-12-08

    This invention is a novel solar tracking mechanism incorporating a number of practical features that give it superior environmental resilience and exceptional tracking accuracy. The mechanism comprises a lightweight space-frame assembly supporting an array of point-focus Fresnel lenses in a two-axis tracking structure. The system is enclosed under a glass cover which isolates it from environmental exposure and enhances tracking accuracy by eliminating wind loading. Tracking accuracy is also enhanced by the system's broad-based tracking support. The system's primary intended application would be to focus highly concentrated sunlight into optical fibers for transmission to core building illumination zones, and the system may also have potential for photovoltaic or photothermal solar energy conversion. 16 figs.

  13. Natural gas monthly, October 1991

    SciTech Connect

    Not Available

    1991-11-05

    The Natural Gas Monthly (NGM) is prepared in the Data Operations Branch of the Reserves and Natural Gas Division, Office of Oil and Gas, Energy Information Administration (EIA), US Department of Energy (DOE). The NGM highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. The data in this publication are collected on surveys conducted by the EIA to fulfill its responsibilities for gathering and reporting energy data. Some of the data are collected under the authority of the Federal Energy Regulatory Commission (FERC), an independent commission within the DOE, which has jurisdiction primarily in the regulation of electric utilities and the interstate natural gas industry. Geographic coverage is the 50 States and the District of Columbia. 16 figs., 33 tabs.

  14. Monitoring of Downstream Salmon and Steelhead at Federal Hydroelectric Facilities, 1996 Annual Report.

    SciTech Connect

    Martinson, Rick D.; Kamps, Jeffrey W.; Graves, Ritchie J.

    1997-08-01

    The seaward migration of juvenile salmonids was monitored by the National Marine Fisheries Service (NMFS) at Bonneville and John Day Dams on the Columbia River in 1996 The NMFS Smolt Monitoring Project is part of a larger Smolt Monitoring Program (SMP) coordinated by the Fish Passage Center (FPC) for the Columbia Basin Fish and Wildlife Authority. The purpose of the SMP is to monitor the migration of the juvenile salmonid stocks in the Columbia basin and make flow and spill recommendations designed to facilitate fish passage. Data are also used for travel time, migration timing, and relative run size analysis. The purpose of the NMFS portion of the program is to provide the FPC with species and project specific real time data from John Day and Bonneville Dams. Monitoring data collected included: river conditions; total numbers of fish; numbers of fry, adult salmon, and incidental catch; daily and seasonal passage patterns; and fish condition. 10 refs., 16 figs., 5 tabs.

  15. An evaluated neutronic data file for elemental cobalt

    SciTech Connect

    Guenther, P.; Lawson, R.; Meadows, J.; Sugimoto, M.; Smith, A.; Smith, D.; Howerton, R.

    1988-08-01

    A comprehensive evaluated neutronic data file for elemental cobalt is described. The experimental data base, the calculational methods, the evaluation techniques and judgments, and the physical content are outlined. The file contains: neutron total and scattering cross sections and associated properties, (n,2n) and (n,3n) processes, neutron radiative capture processes, charged-particle-emission processes, and photon-production processes. The file extends from 10/sup /minus/5/ eV to 20 MeV, and is presented in the ENDF/B-VI format. Detailed attention is given to the uncertainties and correlations associated with the prominent neutron-induced processes. The numerical contents of the file have been transmitted to the National Nuclear Data Center, Brookhaven National Laboratory. 143 refs., 16 figs., 5 tabs.

  16. Glow discharge techniques for conditioning high vacuum systems

    SciTech Connect

    Dylla, H.F.

    1988-03-01

    A review is given of glow discharge techniques which are useful for conditioning vacuum vessels for high vacuum applications. Substantial development of glow discharge techniques has been done for the purpose of in-situ conditioning of the large ultrahigh vacuum systems for particle accelerators and magnetic fusion devices. In these applications the glow discharge treatments remove impurities from vessel surfaces in order to minimize particle-induced desorption coefficients. Cleaning mechanisms involve a mixture of sputtering and ion- (or neutral) induced desorption effects depending on the gas mixture (ArO/sub 2/ vs. H/sub 2/) and excitation method (DC, RF, and ECR). The author will review the methodology of glow discharge conditioning, diagnostic measurements provided by residual gas and surface composition analysis, and applications to vessel conditioning and materials processing. 76 refs., 16 figs.

  17. Mathematical model for predicting the probability of acute mortality in a human population exposed to accidentally released airborne radionuclides. Final report for Phase I

    SciTech Connect

    Filipy, R.E.; Borst, F.J.; Cross, F.T.; Park, J.F.; Moss, O.R.; Roswell, R.L.; Stevens, D.L.

    1980-05-01

    A mathematical model was constructed for the purpose of predicting the fraction of human population which would die within 1 year of an accidental exposure to airborne radionuclides. The model is based on data from laboratory experiments with rats, dogs and baboons, and from human epidemiological data. Doses from external, whole-body irradiation and from inhaled, alpha- and beta-emitting radionuclides are calculated for several organs. The probabilities of death from radiation pneumonitis and from bone marrow irradiation are predicted from doses accumulated within 30 days of exposure to the radioactive aerosol. The model is compared with existing similar models under hypothetical exposure conditions. Suggestions for further experiments with inhaled radionuclides are included. 25 refs., 16 figs., 13 tabs.

  18. Early and continuing effects of combined alpha and beta irradiation of the lung:

    SciTech Connect

    Scott, B.R.; Hahn, F.F.; Snipes, M.B.; Newton, G.J.; Eidson, A.F.; Mauderly, J.L.; Boecker, B.B.

    1988-03-01

    This report summarizes an inhalation exposure experiment that concerns early and continuing effects of combined alpha and beta irradiation of the lung of rats. Both morbidity at 18 months and mortality within 18 months after exposure were examined for rats exposed to the beta-emitter /sup 147/Pm, the alpha-emitter /sup 238/Pu, or both combined. The results were used to validate hazard-function models that were developed (1)for pulmonary functional morbidity at 18 months and (2) for lethality from radiation pneumonitis and pulmonary fibrosis within 18 months. Both models were found to adequately predict the experimental observations after combined chronic alpha and beta irradiation of the lung. A relative biological effectiveness of approximately 7 was obtained for /sup 238/Pu alpha radiation compared to /sup 147/Pm beta radiation for both pulmonary functional morbidity and lethality from radiation pneumonitis and pulmonary fibrosis. 12 refs., 16 figs., 11 tabs.

  19. Oil and gas developments in the Far East in 1987

    SciTech Connect

    Courteney, S.; Soeparjadi, R.A.; Ahmad, S.M.S.

    1988-10-01

    As a result of the stabilization of oil prices in 1987 following their collapse in 1986, the rate of slowdown in Far East exploration activities began to ease. Seismic acquisition increased slightly, and the fall in exploratory drilling was less dramatic in 1987 than in 1986. No major discoveries were reported during 1987, although small-to-medium-size oil and gas discoveries added to the potential reserves of Bangladesh, India, Indonesia, Japan, People's Republic of China, Pakistan, Republic of China, and Thailand. Development drilling continued to rise by a modest amount. Far East oil and condensate production decreased in 1987 by just over 1% to 5.37 million b/d, whereas gas output rose to 11.7 bcf/day. New acreage awards were significantly higher in 1987 than in 1986, particularly in some of the region's key producing countries. 16 figs., 11 tabs.

  20. A haptic system for a multifingered hand

    SciTech Connect

    Stansfield, S.A.

    1990-01-01

    In this paper we present a series of haptic exploratory procedures, or EPs, implemented for a multi-fingered, articulated, sensate robot hand. These EPs are designed to extract specific tactile and kinesthetic information from an object via their purposive invocation by an intelligent robotic system. Taken together, they form an active robotic touch perception system to be used both in extracting information about the environment for internal representation and in acquiring grasps for manipulation. The haptic system presented utilizes an integrated robotic system consisting of a PUMA 560 robot arm, a JPL/Stanford robot hand, with joint torque sensing in the fingers, a wrist force/torque sensor, and a 256 element, spatially-resolved fingertip tactile array. We describe the EPs implemented for this system and provide experimental results which illustrate how they function. A final example demonstrates how the information extracted may be used. 13 refs., 16 figs.

  1. Computation at the edge of chaos: Phase transition and emergent computation

    SciTech Connect

    Langton, C.

    1990-01-25

    In order for computation to emerge spontaneously and become an important factor in the dynamics of a system, the material substrate must support the primitive functions required for computation: the transmission, storage, and modification of information. Under what conditions might we expect physical systems to support such computational primitives This paper presents research on Cellular Automata which suggests that the optimal conditions for the support of information transmission, storage, and modification, are achieved in the vicinity of a phase transition. We observe surprising similarities between the behaviors of computations and systems near phase-transitions, finding analogs of computational complexity classes and the Halting problem within the phenomenology of phase-transitions. We conclude that there is a fundamental connection between computation and phase-transitions, and discuss some of the implications for our understanding of nature if such a connection is borne out. 31 refs., 16 figs.

  2. Fractionally distilled SRC-I, SRC-II, EDS, H-Coal and ITSL direct coal liquefaction process materials: a comparative summary of chemical analysis and biological testing

    SciTech Connect

    Wright, C.W.; Later, D.W.; Dauble, D.D.; Wilson, B.W.

    1985-07-01

    This document reports and compares the results compiled from chemical analyses and biological testing of coal liquefaction process materials which were fractionally distilled, after production, into various comparable boiling-point range cuts. Comparative analyses were performed on solvent refined coal (SRC)-I, SRC-II, H-Coal, EDS an integrated two-stage liquefaction (ITSL) distillate materials. Mutagenicity and carcinogenicity assays were conducted in conjunction with chromatographic and mass spectrometric analyses to provide detailed, comparative, chemical and biological assessments. Where possible, results obtained from the distillate cuts are compared to those from coal liquefaction materials with limited boiling ranges. Work reported here was conducted by investigators in the Biology and Chemistry Department at the Pacific Northwest Laboratory (PNL), Richland, WA. 38 refs., 16 figs., 27 tabs.

  3. Mechanical swirler for a low-NO{sub x}, weak-swirl burner

    DOEpatents

    Cheng, R.K.; Yegian, D.T.

    1999-03-09

    Disclosed is a mechanical swirler for generating diverging flow in lean premixed fuel burners. The swirler of the present invention includes a central passage with an entrance for accepting a feed gas, a flow balancing insert that introduces additional pressure drop beyond that occurring in the central passage in the absence of the flow balancing insert, and an exit aligned to direct the feed gas into a combustor. The swirler also has an annular passage about the central passage and including one or more vanes oriented to impart angular momentum to feed gas exiting the annular passage. The diverging flow generated by the swirler stabilizes lean combustion thus allowing for lower production of pollutants, particularly oxides of nitrogen. 16 figs.

  4. Office of Analysis and Evaluation of Operational Data 1989 annual report, Power reactors

    SciTech Connect

    1990-07-01

    The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1989. The report is published in two separate parts. This document, NUREG-1272, Vol. 4, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. This report also compiles the status of staff actions resulting from previous Incident Investigation Team (IIT) reports. 16 figs., 9 tabs.

  5. Observation and phenomenology of glueballs

    SciTech Connect

    Lindenbaum, S.J.

    1985-01-01

    The experimental evidence and the relevant phenomenology of glueballs are reviewed. The opinion is expressed that the glueball resonance explanation is the only viable one for the data on g/sub T/, g/sub T/sup 1//, and g/sub T/sup 11//. It is shown that alternative explanations are either incorrect, or do not fit the data, or both, leading to the conclusion that these states are probably produced by glueballs. The OZI rule is explained. Glueball masses and width are considered. Some conclusions are drawn regarding an OZI suppressed reaction ..pi../sup -/p ..-->.. phi phi n. Glueball candidates from the J/psi radiative decay are discussed. 44 refs., 16 figs. (LEW)

  6. New economic cost perspectives for valuing solar technologies

    SciTech Connect

    Awerbuch, S.

    1995-12-31

    Utility planning models evaluate alternative resource options using engineering oriented, discounted-cash-flow (DCF) methodologies to find least-cost options. Although DCF has been widely used for decades, recent capital budgeting experience in manufacturing suggests that more sophisticated procedures are required for comparing passive, capital intensive solar technologies to expense-intensive fossil generation. DCF techniques, which ignore financial risk, have a dismal record for correctly valuing new manufacturing process technologies such as robotics and computer-integrated manufacturing, in part because the benefits cannot be easily measured using traditional accounting concepts. This paper illustrates the application of capital-market theory to the valuation of conventional fossil resources as well as photovoltaics (PV). The paper also explores the importance of technological progress and critically examines the widespread practice of evaluating energy technologies on the basis of their levelized costs. 73 refs., 16 figs., 18 tabs.

  7. An aerial radiological survey of the West Valley Demonstration Project and surrounding area, West Valley, New York

    SciTech Connect

    Berry, H.A.

    1991-09-01

    An aerial radiological survey of the West Valley Demonstration Project and the surrounding area was conducted from mid-August through early September 1984 by EG G Energy Measurements, Inc. for the United States Department of Energy. The radiological survey was part of the United States Department of Energy Comprehensive Integrated Remote Sensing (CIRS) program, which provides state-of-the-art remote sensing to support the needs of the various DOE facilities. The survey consisted of airborne measurements of both natural and man-made gamma radiation emanating from the terrestrial surface. These measurements allowed an estimate of the distribution of isotopic concentrations in the area surrounding the project site. Results are reported as isopleths superimposed on aerial photographs of the area. Gamma ray energy spectra are also presented for the net man-made radionuclides. 8 refs., 16 figs., 9 tabs.

  8. Recent advances in flue gas desulfurization technologies

    SciTech Connect

    Pan, Y.S.

    1991-01-01

    Recent advances in flue gas desulfurization (FGD) technologies are reported. The technological advances include conventional wet FGD system improvements, advanced wet FGD system development, spray dryer system operations, technologies for furnace sorbent injections, post-combustion dry technologies, combined SO{sub 2}/NO{sub x} technologies, and several emerging FGD technologies. In addition, progress of by-product utilization that affects the operating cost of FGD systems is described. Economics of some commercially available and nearly maturing FGD technologies is also discussed. The materials included in this report are obtained from technical presentations made through September 1990, at several national and international conferences. This report is intended to document current advances and status of various FGD technologies. 101 refs., 16 figs.

  9. Evaluation of thermal remote sensing as a low-cost regional geothermal exploration technique in New Mexico. Final report

    SciTech Connect

    Inglis, M.; Budge, T.K.

    1985-03-01

    Airborne and satellite borne thermal infrared scanner data were analyzed for application in the exploration of geothermal resources in New Mexico. The location for this study was the East Mesa Geothermal Field near Las Cruces, New Mexico. Primary sensor was the Thermal Infrared Multispectral Scanner (TIMS) which obtained data at 10-meter resolution. Additional data for comparison came from the Heat Capacity Mapping Mission (HCMM) satellite which provided data at 600-meter resolution. These data were compared to the soils, vegetation, and geology of the area, as well as borehole temperature data in an attempt to explain temperature patterns and anomalies. Thermal infrared scanner data were found to be too sensitive to solar-induced temperature anomalies to directly reflect the presence of subsurface geothermal anomalies but may provide valuable supporting information for a geothermal exploration program. 15 refs., 16 figs., 3 tabs.

  10. Separation of non-hazardous, non-radioactive components from ICPP calcine via chlorination

    SciTech Connect

    Nelson, L.O.

    1995-05-01

    A pyrochemical treatment method for separating non-radioactive from radioactive components in solid granular waste accumulated at the Idaho Chemical Processing Plant was investigated. The goal of this study was to obtain kinetic and chemical separation data on the reaction products of the chlorination of the solid waste, known as calcine. Thermodynamic equilibrium calculations were completed to verify that a separation of radioactive and non-radioactive calcine components was possible. Bench-scale chlorination experiments were completed subsequently in a variety of reactor configurations including: a fixed-bed reactor (reactive gases flowed around and not through the particle bed), a packed/fluidized-bed reactor, and a packed-bed reactor (reactive gases flowed through the particle bed). Chemical analysis of the reaction products generated during the chlorination experiments verified the predictions made by the equilibrium calculations. An empirical first-order kinetic rate expression was developed for each of the reactor configurations. 20 refs., 16 figs., 21 tabs.

  11. Remote information service access system based on a client-server-service model

    DOEpatents

    Konrad, A.M.

    1997-12-09

    A local host computing system, a remote host computing system as connected by a network, and service functionalities: a human interface service functionality, a starter service functionality, and a desired utility service functionality, and a Client-Server-Service (CSS) model is imposed on each service functionality. In one embodiment, this results in nine logical components and three physical components (a local host, a remote host, and an intervening network), where two of the logical components are integrated into one Remote Object Client component, and that Remote Object Client component and the other seven logical components are deployed among the local host and remote host in a manner which eases compatibility and upgrade problems, and provides an illusion to a user that a desired utility service supported on a remote host resides locally on the user`s local host, thereby providing ease of use and minimal software maintenance for users of that remote service. 16 figs.

  12. Remote information service access system based on a client-server-service model

    DOEpatents

    Konrad, A.M.

    1996-08-06

    A local host computing system, a remote host computing system as connected by a network, and service functionalities: a human interface service functionality, a starter service functionality, and a desired utility service functionality, and a Client-Server-Service (CSS) model is imposed on each service functionality. In one embodiment, this results in nine logical components and three physical components (a local host, a remote host, and an intervening network), where two of the logical components are integrated into one Remote Object Client component, and that Remote Object Client component and the other seven logical components are deployed among the local host and remote host in a manner which eases compatibility and upgrade problems, and provides an illusion to a user that a desired utility service supported on a remote host resides locally on the user`s local host, thereby providing ease of use and minimal software maintenance for users of that remote service. 16 figs.

  13. Development of an advanced process for drying fine coal in an inclined fluidized bed: Technical progress report for the second quarter, January 19--March 31, 1989

    SciTech Connect

    Boysen, J.E.; Cha, C.Y.; Berggren, M.H.; Jha, M.C.

    1989-05-01

    This research project is for the development of a technically and economically feasible process for drying and stabilizing of fine particles of high-moisture subbituminous coal. Research activities were initiated with efforts concentrating on characterization of the two feed coals: Eagle Butte coal from AMAX Coal Company's mine located in the Powder River Basin of Wyoming; and coal from Usibelli Coal Mine, Inc.'s mine located in central Alaska. Both of the feed coals are high-moisture subbituminous coals with ''as received'' moisture contents of 29% and 22% for the Eagle Butte and Usibelli coals, respectively. However, physical analyses of the crushed coal samples (--28-mesh particle size range) indicate many differences. The minimum fluidization velocity (MFV) of the feed coals were experimentally determined. The MFV for --28-mesh Eagle Butte coal is approximately 1 ft/min, and the MFV for --28-mesh Usibelli coal is approximately 3 ft/min. 2 refs., 16 figs., 3 tabs.

  14. Scrap tire recycling: Promising high value applications. Final report

    SciTech Connect

    Bauman, B.D.; Leskovyansky, P.J.; Drela, H.

    1993-11-01

    Surface modification of scrap tire rubber (rubber particles treated with chlorine gas) show promise for ameliorating the scrap tire problem (the treated rubber can be used as a component in high- performance, expensive polymer systems). The process has been proven in Phase I. Phase II covers market/applications, process development (Forberg-design mixer reactor was chosen), plant design, capital cost estimate, economics environmental/safety/health, and energy impact. Almost of the small amount of chlorine is consumed. The capital costs for a rubber particle treatment facility are attractive, being at least two orders of magnitude less than that of facilities for making new polymer materials. Large volume markets using treated rubber are needed. The amount of scrap rubber available is small compared to the polymers available for replacement. 7 tabs, 16 figs.

  15. Uncooled two-stroke gas engine for heat pump drive

    SciTech Connect

    Badgley, P.; McNulty, D.; Woods, M.

    1990-01-01

    This paper describes the design and analysis of a family of natural gas fueled, uncooled, two-stroke, lean burn, thermal-ignition engines. The engines were designed specifically to meet the requirements dictated by the commercial heat pump application. The engines have a power output ranging from 15 to 100 kW; a thermal efficiency of 36 percent; a mean time between failure greater than 3 years; and a life expectancy of 45,000 hours. To meet these specifications a family of very simple, uncooled, two-stroke cycle engines were designed which have no belts, gears or pumps. The engines utilize crankcase scavenging, lubrication, stratified fuel introduction to prevent raw fuel from escaping with the exhaust gas, use of and ceramic rolling contact bearings. The Thermal Ignition Combustion System (TICS) is used for ignition to enable the engines to operate with a lean mixture and eliminate spark plug erosion. 4 refs., 16 figs.

  16. Theory-based transport simulations of TFTR L-mode temperature profiles

    SciTech Connect

    Bateman, G.

    1991-10-24

    The temperature profiles from a selection of TFTR L-mode discharges are simulated with the 1-1/2-D BALDUR transport code using a combination of theoretically derived transport models, called the Multi-Mode Model. The present version of the Multi-Mode Model consists of effective thermal diffusivities resulting from trapped electron modes and ion temperature gradient ({eta}{sub i}) modes, which dominate in the core of the plasma, together with resistive ballooning modes, which dominate in the periphery. Within the context of this transport model and the TFTR simulations reported here, the scaling of confinement with heating power comes from the temperature dependence of the {eta}{sub i} and trapped electron modes, while the scaling with current comes mostly from resistive ballooning modes. 24 refs., 16 figs., 3 tabs.

  17. Technical support for geopressured-geothermal well activities in Louisiana

    SciTech Connect

    Not Available

    1991-07-01

    Continuous recording microearthquake monitoring networks have been established around US Department of Energy (DOE) geopressured-geothermal design wells in southwestern Louisiana and southeastern Texas since summer 1980 to assess the effects well development may have had on subsidence and growth-fault activation. This monitoring has shown several unusual characteristics of Gulf Coast seismic activity. The observed activity is classified into two dominant types, one with identifiable body phases (type 1) and the other with only surface-wave signatures (type 2). During this reporting period no type 1 or body-wave events were reported. A total of 230 type 2 or surface-wave events were recorded. Origins of the type 2 events are still not positively understood; however, little or no evidence is available to connect them with geopressured-geothermal well activity. We continue to suspect sonic booms from military aircraft or some other human-induced source. 37 refs., 16 figs., 6 tabs.

  18. Surfactant screening of diesel-contaminated soil

    SciTech Connect

    Peters, R.W.; Montemagno, C.D.; Shem, L. ); Lewis, B.A. . Dept. of Civil Engineering)

    1990-01-01

    At one installation, approximately 60,000 gal of No. 2 diesel fuel leaked into the subsurface environment, with contamination at depths of 6 to 34 m below the surface. Argonne National Laboratory was contracted to perform treatability studies for site remediation. The treatability studies focused on four separate phases: (1) leachability studies on the various contaminated soil borings, (2) air stripping studies, (3) bioremediation studies, and (4) surfactant screening/surfactant flooding studies. This paper summarizes the fourth phase of the research program in which twenty-one surfactants were screened for possible use to mobilize the organics from the contaminated soil prior to bioremediation. Anionic surfactants resulted in the greatest degree of diesel mobilization. The most promising surfactants will be employed on actual contaminated soil samples obtained from the site. 18 refs., 16 figs., 1 tab.

  19. ITER equilibrium with bootstrap currents, lower hybrid current drive and fast wave current drive

    SciTech Connect

    Ehst, D.A.

    1989-03-01

    A current drive system is proposed for the technology phase of ITER which relies on rf power and bootstrap currents. The rf/bootstrap system permits operation at high safety factor, and we consider the axial value to be q/sub a/ approx. = 1.9, which minimizes the need for seed current near the magnetic axis. Lower hybrid power (/approximately/30 MW) provides current density near the surface, ICRF (/approximately/65 MHz, /approximately/30 MW) fast waves generate current near the axis, and high frequency fast waves (/approximately/250 MHz, /approximately/74 MW) supply the remaining current density. The system is not yet optimized but appears to offer great flexibility (ion heating for ignition, current rampup, etc.) with relatively inexpensive and well developed technology. 29 refs., 16 figs., 1 tab.

  20. Toughening epoxy resin with poly(methyl methacrylate)-grafted natural rubber

    SciTech Connect

    Rezaifard, A.H.; Hodd, K.A.; Barton, J.M.

    1993-12-31

    A novel rubber, poly(methyl methacrylate)-g-natural rubber (Hevea-plus MG), has been studied as a toughening agent for bisphenol A diglycidyl ether (Shell 828 epoxy resin) cured with piperidine. Effective dispersions of the rubber, in concentrations of 2-10 parts per hundred parts resin, were achieved by adjusting the solubility parameter of the epoxy to approximate that of poly(methyl methacrylate) by adding bisphenol A. The fracture energy of the rubber-modified resin was determined by compact tension tests (in the temperature range -60 to +40{degrees}C) and by Charpy impact tests. The poly(methyl methacrylate)-g-natural rubber was found to be an effective toughening agent for the epoxy resin at both low and high rates of strain. Possible fracture mechanisms are discussed. 22 refs., 16 figs., 5 tabs.

  1. Rubber-modified epoxies: Analysis of the phase-separation process

    SciTech Connect

    Verchere, D.; Sautereau, H.; Pascault, J.P.; Moschiar, S.M.; Riccardi, C.C.; Williams, R.J.J.

    1993-12-31

    The phase-separation process of a diepoxide based on bisphenol A diglycidyl ether cured with a cycloaliphatic diamine in the presence of an epoxy-terminated butadiene-acrylonitrile random copolymer (ETBN) was experimentally studied and theoretically simulated. The increase in the average molecular weight of the epoxy-amine polymer is shown to be the main thermodynamic factor leading to phase separation. The competition between nucleation-growth and spinodal decomposition is analyzed. Low values of interfacial tensions and polymerization rates favor the first mechanism in most cases. A secondary phase separation must occur inside the dispersed particles, leading to a segregated epoxy-amine phase. The theoretical simulation explains the increase of the average diameter of dispersed-phase particles with increasing polymerization temperature. The volume fraction of dispersed phase is the dominating factor affecting fracture toughness. 49 refs., 16 figs.

  2. Modal testing in the design evaluation of wind turbines

    SciTech Connect

    Lauffer, J.P.; Carne, T.G.; Ashwill, T.D.

    1987-01-01

    This paper reviews several techniques which have been used to successfully measure modal parameters for wind turbines. Due to problems in providing low frequency excitation (0.1 to 5.0 Hz), modal testing of moderate-size turbines can be difficult. Several techniques of low frequency excitation have been explored, including impact, wind, step-relaxation, and human input. As one application of these techniques, a prototype turbine was tested and two modal frequencies were found to be very close to integral multiples of the operating speed, which caused a resonant condition. The design was modified to shift these frequencies, and the turbine was retested to confirm the expected changes in the modal frequencies. 8 refs., 16 figs., 1 tab.

  3. The comparative uptake and interaction of several radionuclides in the trophic levels surrounding the Los Alamos Meson Physics Facility (LAMPF) waste water ponds

    SciTech Connect

    Brooks, G.H. Jr.

    1989-08-01

    A study was undertaken to examine the uptake, distribution, and interaction of five activation products (Co-57, Be-7, Cs-134, Rb-83, and Mn-54) within the biotic and abiotic components surrounding the waste treatment lagoons of the Los Alamos Meson Physics Facility (LAMPF). The study attempted to ascertain where, and what specific interactions were taking place among the isotopes and the biotic/abiotic components. A statistical approach, utilizing Multivariate Analysis of Variance (MANOVA), was conducted testing the radioisotopic concentrations by (1) the trophic levels (TROPLVL) in each position sampled on the grid, (2) where sampled on the grid (TRAN), (3) where sampled with-in each grid line (PLOT), and (4) the side with which sampled (SIDE). This provided both the dependent and independent variables that would be tested. The Null Hypothesis (Ho) tested the difference in the mean values of the isotopes within/between each of the four independent variables. The Rb-83 statistic indicated an accumulation within the TRAN and PLOT variables within the sampled area. The Co-57 test statistic provided a value which indicated that accumulation of this isotope within TROPLVL was taking place. Mn-54 test values indicated that accumulation was also taking place at the higher trophic levels within the PLOT, TRAN, and SIDE positions. Cs-134 was found to accumulate to third level in this trophic level structure (TROPLVL-(vegetation)), and then decrease from there. The Be-7 component provided no variance from known compartmental transfers. 210 refs., 17 figs., 4 tabs.

  4. Hungry water: Effects of dams and gravel mining on river channels

    SciTech Connect

    Kondolf, G.M.

    1997-07-01

    Rivers transport sediment from eroding uplands to depositional areas near sea level. If the continuity of sediment transport is interrupted by dams or removal of sediment from the channel by gravel mining, the flow may become sediment-starved (hungry water) and prone to erode the channel bed and banks, producing channel incision (downcutting), coarsening of bed material, and loss of spawning gravels for salmon and trout (as smaller gravels are transported without replacement from upstream), Gravel is artificially added to the River Rhine to prevent further incision and to many other rivers in attempts to restore spawning habitat. It is possible to pass incoming sediment through some small reservoirs, thereby maintaining the continuity of sediment transport through the system. Damming and mining have reduced sediment delivery from rivers to many coastal areas, leading to accelerated beach erosion. Sand and gravel are mined for construction aggregate from river channel and floodplains. In-channel mining commonly causes incision, which may propagate up- and downstream of the mine, undermining bridges, inducing channel instability, and lowering alluvial water tables. Floodplain gravel pits have the potential to become wildlife habitat upon reclamation, but may be captured by the active channel and thereby become instream pits. Management of sand and gravel in rivers must be done on a regional basis, restoring the continuity of sediment transport where possible and encouraging alternatives to river-derived aggregate sources. 80 refs., 17 figs.

  5. Surface organometallic chemistry: Reaction of tris-allyl rhodium with surfaces of silica, alumina, titania, and magnesia

    SciTech Connect

    Dufour, P.; Houtman, C.; Santini, C.C.

    1992-05-20

    The reaction of Rh({eta}{sup 3}-C{sub 3}H{sub 5}){sub 3}, 1, with silica, alumina, titania, and magnesia has been followed by infrared spectroscopy, isotopic labeling experiments, quantitative analysis of gaseous products, and elemental analysis. Complex 1 reacts rapidly with alumina pretreated to 350{degrees}C and with silica and titania to form a bis-allylic rhodium species grafted to the surface, but no immediate reaction was observed between 1 and alumina pretreated to 200 {degrees}C or magnesia. This reaction likely proceeds via electrophilic cleavage of Rh-C bonds of 1 by a surface OH group. On silica, the results of IR experiments after labeling the surface with {sup 16}O-D and {sup 18}O-H and structural arguments suggest that two 18-electron species are possible on the surface: one for which the rhodium is coordinated both to an oxygen and a hydroxyl group linked to the same silicon atom and another for which the oxygen atom and the OH group are linked to two different silicon atoms. Molecular mechanics modeling of silica, alumina, and titania was used as a complement to the experimental work to test the plausibility of various modes of attachment of the rhodium allyl complex. 40 refs., 17 figs., 4 tabs.

  6. Retention indices, relative response factors, and mass spectra of trifluoroethyl and heptafluorobutyl esters of carboxylic acids determined by capillary GC/MS

    SciTech Connect

    Yu, S.K.-T.; Vrana, R.P.; Green, J.B.

    1990-11-01

    The GC/MS characteristics of carboxylic acid esters prepared from fluorine-containing alcohols were compared to those of methyl esters. The GC retention of 2,2,2-trifluoroethyl (TFE) esters was less than, and 2,2,3,3,4,4,4-heptafluoro-1-butyl (HFB) esters approximately equivalent to that of methyl esters. The peak shape of both TFE and HFB esters was slightly superior to that of methyl esters. Mass spectra of TFE and HFB aliphatic esters show significantly more intense molecular and key fragment ions than those of methyl esters. Also, owing to their significantly higher molecular weights, TFE or HFB ester molecular ions and most fragment ions of interest occur at significantly higher m/z values than most potential interfering ions. The GC retention indices, relative GC/MS total ion current response factors, and 70 eV electron impact mass spectra of about 70 TFE and 70 HFB carboxylic acid esters are reported. Results from analysis of a TFE/HFB esterified petroleum carboxylic acid concentrate are discussed in detail. 26 refs., 17 figs., 3 tabs.

  7. Evaluation of dust-related health hazards associated with air coring at G-Tunnel, Nevada Test Site

    SciTech Connect

    Skaggs, B.J.; Ortiz, L.W.; Burton, D.J.; Isom, B.L.; Vigil, E.A.

    1991-03-01

    The Yucca Mountain Project was established to evaluate the potential for storing high-level radioactive wastes in geologic formations. Hydrologists recommended that drilling or coring in support of characterization tests be performed dry. Dry drilling, or air coring, presents a concern about health protection for the drilling personnel. The rock generally has a high silica content, and natural zeolites are abundant. Some zeolites are fibrous, leading to concerns that inhalation may result in asbestos-like lung diseases. An industrial hygiene study (IH) was conducted as part of an air coring technical feasibility test. The IH study found the potential for exposures to airborne silica and nuisance dusts to be within regulatory requirements and determined the commercial dust control equipment monitored to be effective when used in conjunction with a good area ventilation system and sound IH practices. Fibrous zeolites were not detected. Recommendations for the Yucca Mountain studies are (1) dust collection and control equipment equivalent or superior to that monitored must be used for any dry drilling activity and must be used with good general dilution ventilation and local exhaust ventilation provided on major emission sources; (2) good industrial hygiene work practices must be implemented, including monitoring any area where zeolitic fibers are suspect; and (3) a study should be conducted to determine the biological effects of the fibrous zeolite, mordenite. 25 refs., 17 figs., 14 tabs.

  8. GENII: The Hanford Environmental Radiation Dosimetry Software System: Volume 2, Users' manual: Hanford Environmental Dosimetry Upgrade Project

    SciTech Connect

    Napier, B.A.; Peloquin, R.A.; Strenge, D.L.; Ramsdell, J.V.

    1988-11-01

    The Hanford Environmental Dosimetry Upgrade Project was undertaken to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) in updated versions of the environmental pathway analysis models used at Hanford. The resulting second generation of Hanford environmental dosimetry computer codes is compiled in the Hanford Environmental Dosimetry System (Generation II, or GENII). The purpose of this coupled system of computer codes is to analyze environmental contamination of, air, water, or soil. This is accomplished by calculating radiation doses to individuals or populations. GENII is described in three volumes of documentation. This second volume is a Users' Manual, providing code structure, users' instructions, required system configurations, and QA-related topics. The first volume describes the theoretical considerations of the system. The third volume is a Code Maintenance Manual for the user who requires knowledge of code detail. It includes logic diagrams, global dictionary, worksheets, example hand calculations, and listings of the code and its associated data libraries. 27 refs., 17 figs., 23 tabs.

  9. A new technology for producing hydrogen and adjustable ratio syngas from coke oven gas

    SciTech Connect

    Jun Shen; Zhi-zhong Wang; Huai-wang Yang; Run-sheng Yao

    2007-12-15

    About 15 billion Nm{sup 3} coke oven gas (COG) is emitted into the air in Shanxi Province in China as air pollutants. It is also a waste of precious chemical resources. In this study, COG was purified respectively by four methods including refrigeration, fiberglass, silica gel, and molecular sieve. Purified COG was separated by a prism membrane into two gas products. One consists mainly of H{sub 2} ({gt}90 vol %) and the other is rich in CH{sub 4} ({gt}60 vol %) with their exact compositions to vary with the membrane separation pressure and outlet gas flow ratio. The gas rich in CH{sub 4} was partially oxidized with oxygen in a high-temperature fixed-bed quartz reactor charged with coke particles of 10 mm size. At 1200-1300{sup o}C, a CH{sub 4} conversion of {gt}99% could be obtained. The H{sub 2}/CO ratio in the synthesis product gas can be adjusted in the range 0.3-1.4, very favorable for further C1 synthesis. 10 refs., 17 figs., 1t ab.

  10. Sintering behavior of doped ZnO powders for high field varistors

    SciTech Connect

    Ghirlanda, M.

    1990-08-01

    The sintering of ZnO varistor precursor powders, doped with Co, Mn and different concentrations of Bi and Al, is investigated and discussed in relation with sintering models. One purpose of the present study is to provide information valuable for the fabrication of high field varistors. As the fundamental parameter of these electronic components is the breakdown voltage per unit of thickness, which is determined by the number of grain boundaries per linear dimension, the grain size and the sintered density are crucial variables, and the sintering is a central step in the manufacturing of such varistors. Sintering experiments performed at constant heating rate in a loading dilatometer provide data on the densification and creep of the compacted powders. Another goal of the present study is to provide an experimental basis for the interpretation of the evolution of the ratio between densification rate and creep rate in terms of competition between densification and microstructure coarsening. This is accomplished by taking advantage of the variety of sintering behaviors that takes place in the system ZnO-Bi-Al: the comparison of these behaviors allows us to correlate the macroscopic sintering parameters to the evolution of the microstructure. It results that, while in non-doped powders densification and coarsening develop in a balanced way, resulting in the constancy of the ratio between densification rate and creep rate, the effect of the dopants on the sintering kinetics alters such a balance, leading this ratio to vary. 17 figs.

  11. Stress corrosion cracking of alloy 600 using the constant strain rate test

    SciTech Connect

    Bulischeck, T. S.; van Rooyen, D.

    1980-01-01

    The most recent corrosion problems experienced in nuclear steam generators tubed with Inconel alloy 600 is a phenomenon labeled ''denting''. Denting has been found in various degrees of severity in many operating pressurized water reactors. Laboratory investigations have shown that Inconel 600 exhibits intergranular SCC when subjected to high stresses and exposed to deoxygenated water at elevated temperatures. A research project was initiated at Brookhaven National Laboratory in an attempt to improve the qualitative and quantitative understanding of factors influencing SCC in high temperature service-related environments. An effort is also being made to develop an accelerated test method which could be used to predict the service life of tubes which have been deformed or are actively denting. Several heats of commercial Inconel 600 tubing were procured for testing in deaerated pure and primary water at temperatures from 290 to 365/sup 0/C. U-bend type specimens were used to determine crack initiation times which may be expected for tubes where denting has occurred but is arrested and provide baseline data for judging the accelerating effects of the slow strain rate method. Constant extension rate tests were employed to determine the crack velocities experienced in the crack propagation stage and predict failure times of tubes which are actively denting. 8 refs., 17 figs., 5 tabs.

  12. Gamma ray emission from spheres pulsed with D-T neutrons: Results of May 1987 experiments at RTNS-1

    SciTech Connect

    Goldberg, E.; Hansen, L.F.; Howerton, R.J.; Komoto, T.T.; Pohl, B.A.

    1987-11-01

    Subsequent to the analysis of the June 1986 series of experiments at RTNS-1, we thought it sensible to repeat some of the experiments with greater care given to the high energy portions of the effluent gamma ray spectra. In addition, some new materials were recommended for study, such as silicon. And since among our earlier experiments we observed data which was not highly reproducible, repeated runs would provide a quantitative assessment of the precision of the experiments. Accordingly, we followed the procedure outlined in UCID-20884. First, we calibrated the NE-213 detector with standard gamma ray sources and checked for linearity of pulse height with energy deposited by electrons. We then conducted experiments at RTNS-1, using spherical configurations of C, Si, Al, H/sub 2/O, N/sub 2/,Ti, Fe, and C/sub 2/F/sub 4/. The H/sub 2/O was contained in a modified glass flask, while the liquid nitrogen was held in a double-walled steel dewar. 25 refs., 17 figs., 9 tabs.

  13. RF driven sulfur lamp having driving electrodes which face each other

    DOEpatents

    Gabor, G.; Orr, T.R.; Greene, C.M.; Crawford, D.G.; Berman, S.M.

    1999-06-22

    A high intensity discharge lamp without mercury is disclosed radiating a selected spectrum of which can be almost entirely in the visible range from an envelope that contains a sulfur containing substance. The lamp utilizes a signal source that generates an excitation signal that is externally coupled to the exterior surface of the envelope to excite the enclosed sulfur containing substance. Various embodiments of the lamp use electrodes adjacent the envelope to couple the excitation signal thereto with the face of the electrodes shaped to complement the shape of the exterior surface of the envelope. Two shapes discussed are spherical and cylindrical. To minimize filamentary discharges each envelope may include an elongated stem affixed to the exterior thereof whereby a rotational subsystem spins the envelope. In yet another embodiment the envelope has a Dewar configuration with two electrodes, one positioned near the external curved side surface of the body, and a second to the inner surface of the hole through the envelope. Further, the envelope may contain a backfill of a selected inert gas to assist in the excitation of lamp with that backfill at a pressure of less than 1 atmosphere, wherein the backfill pressure is directly related to the increase or decrease of peak output and inversely related to the increase and decrease of the emitted spectrum from the envelope. The emitting fill can be less than 6 mg/cc, or at least 2 mg/cc of the envelope of a sulfur containing substance. 17 figs.

  14. RF driven sulfur lamp having driving electrodes arranged to cool the lamp

    DOEpatents

    Gabor, G.; Orr, T.R.; Greene, C.M.; Crawford, D.G.; Berman, S.M.

    1998-10-20

    A high intensity discharge lamp without mercury is disclosed radiating a selected spectrum of which can be almost entirely in the visible range from an envelope that contains a sulfur containing substance. The lamp utilizes a signal source that generates an excitation signal that is externally coupled to the exterior surface of the envelope to excite the enclosed sulfur containing substance. Various embodiments of the lamp use electrodes adjacent the envelope to couple the excitation signal thereto with the face of the electrodes shaped to complement the shape of the exterior surface of the envelope. Two shapes discussed are spherical and cylindrical. To minimize filamentary discharges each envelope may include an elongated stem affixed to the exterior thereof whereby a rotational subsystem spins the envelope. In yet another embodiment the envelope has a Dewar configuration with two electrodes, one positioned near the external curved side surface of the body, and a second to the inner surface of the hole through the envelope. Further, the envelope may contain a backfill of a selected inert gas to assist in the excitation of lamp with that backfill at a pressure of less than 1 atmosphere, wherein the backfill pressure is directly related to the increase or decrease of peak output and inversely related to the increase and decrease of the emitted spectrum from the envelope. The emitting fill can be less than 6 mg/cc, or at least 2 mg/cc of the envelope of a sulfur containing substance. 17 figs.

  15. Direct conversion of methane to C sub 2 's and liquid fuels

    SciTech Connect

    Warren, B.K.; Campbell, K.D.

    1989-11-22

    Objectives of the project are to discover and evaluate novel catalytic systems for the conversion of methane or by-product light hydrocarbon gases either indirectly (through intermediate light gases rich in C{sub 2}'s) or directly to liquid hydrocarbon fuels, and to evaluate, from an engineering perspective, different conceptualized schemes. The approach is to carry out catalyst testing on several specific classes of potential catalysts for the conversion of methane selectively to C{sub 2} products. Promoted metal oxide catalysts were tested. Several of these exhibited similar high ethylene to ethane ratios and low carbon dioxide to carbon monoxide ratios observed for the NaCl/{alpha}-alumina catalyst system reported earlier. Research on catalysts containing potentially activated metals began with testing of metal molecular sieves. Silver catalysts were shown to be promising as low temperature catalysts. Perovskites were tested as potential methane coupling catalysts. A layered perovskite (K{sub 2}La{sub 2}Ti{sub 3}O{sub 10}) gave the highest C{sub 2} yield. Work continued on the economic evaluation of a hypothetical process converting methane to ethylene. An engineering model of the methane coupling system has been prepared. 47 refs., 17 figs., 57 tabs.

  16. Environmental Survey preliminary report, Princeton Plasma Physics Laboratory, Princeton, New Jersey

    SciTech Connect

    Not Available

    1989-05-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Princeton Plasma Physics Laboratory (PPPL), conducted June 13 through 17, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Team members are being provided by private contractors. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PPPL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PPPL, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environment problems identified during its on-site activities. The S A plan is being developed by the Idaho National Engineering Laboratory. When completed, the S A results will be incorporated into the PPPL Survey findings for inclusion in the Environmental Survey Summary Report. 70 refs., 17 figs., 21 tabs.

  17. MESOILT2, a Lagrangian trajectory climatological dispersion model

    SciTech Connect

    Ramsdell, J.V. Jr.; Burk, K.W.

    1991-03-01

    The objective of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate the radiation dose that individuals could have received as a result of emissions from nuclear operations at the Hanford Site. An independent Technical Steering Panel (TSP) directs the project, which is conducted by the Pacific Northwest Laboratory (PNL). The TSP directed PNL to demonstrate that its recommended approach for dose reconstruction is technically feasible and practical. This demonstration was Phase 1 of the project. This report is specifically concerned with the approach that PNL recommends for dealing with the atmospheric pathway. The TSP established a model domain for the atmospheric pathway for Phase 1 that includes 10 counties in Washington and Oregon and covers several thousand square miles. It is unrealistic to assume that atmospheric models which estimate transport and diffusion based on the meteorological conditions near the point of release of material at the time of release are adequate for a region this large. As a result, PNL recommended use of a Lagrangian trajectory, puff dispersion model for the Phase I study. This report describes the MESOILT2 computer code and the atmospheric transport, diffusion, deposition, and depletion models used in Phase I. The contents of the report include a technical description of the models, a user's guide for the codes, and descriptions of the individual code elements. 53 refs., 17 figs., 5 tabs.

  18. Preliminary report on fluid inclusions from halites in the Castile and lower Salado formations of the Delaware Basin, southeastern New Mexico. [Freezing-point depression

    SciTech Connect

    Stein, C.L.

    1985-09-01

    A suite of samples composed primarily of halite from the upper Castile and lower Salado Formations of the Permian Basin was selected from Waste Isolation Pilot Plant (WIPP) core for a reconnaissance study of fluid inclusions. Volume percent of these trapped fluids averaged 0.7% to 1%. Freezing-point depressions varied widely and appeared to be unrelated to fluid-inclusion type, to sedimentary facies, or to stratigraphic depth. However, because very low freezing points were usually associated with anhydrite, a relation may exist between freezing-point data and lithology. Dissolved sulfate values were constant through the Castile, then decreased markedly with lesser depth in the lower Salado. This trend correlates very well with observed mineralogy and is consistent with an interpretation of the occurrence of secondary polyhalite as a result of gypsum or anhydrite alteration with simultaneous consumption of dissolved sulfate from the coexisting fluids. Together with the abundance and distribution of fluid inclusions in primary or ''hopper'' crystal structures, this evidence suggests that inclusions seen in these halites did not migrate any significant geographical distance since their formation. 28 refs., 17 figs., 2 tabs.

  19. Gas stream cleanup

    SciTech Connect

    Bossart, S.J.; Cicero, D.C.; Zeh, C.M.; Bedick, R.C.

    1990-08-01

    This report describes the current status and recent accomplishments of gas stream cleanup (GSCU) projects sponsored by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The primary goal of the Gas Stream Cleanup Program is to develop contaminant control strategies that meet environmental regulations and protect equipment in advanced coal conversion systems. Contaminant control systems are being developed for integration into seven advanced coal conversion processes: Pressurized fludized-bed combustion (PFBC), Direct coal-fueled turbine (DCFT), Intergrated gasification combined-cycle (IGCC), Gasification/molten carbonate fuel cell (MCFC), Gasification/solid oxide fuel cell (SOFC), Coal-fueled diesel (CFD), and Mild gasification (MG). These advanced coal conversion systems present a significant challenge for development of contaminant control systems because they generate multi-contaminant gas streams at high-pressures and high temperatures. Each of the seven advanced coal conversion systems incorporates distinct contaminant control strategies because each has different contaminant tolerance limits and operating conditions. 59 refs., 17 figs., 5 tabs.

  20. Linear-quadratic-regulator pointing control system design for a high-altitude balloon payload

    SciTech Connect

    White, J.E.; Etter, J.R.

    1987-11-01

    A pointing control system design for the science package of a NASA high-altitude research balloon is described. The balloon assembly consists of a single helium balloon connected to a payload recovery parachute, payload gondola, and ballast hopper. Pointing of the scientific payload is accomplished via an arrangement of drive motors and a flywheel. Linear quadratic regulator (LQR) synthesis techniques are employed to produce the azimuth and elevation controller designs. The use of LQR synthesis is motivated by the azimuthal dynamic coupling encountered between the balloon and gondola. Two control devices are employed in azimuth, one of which is a decoupler motor and the other a flywheel. The decoupler motor is intended to isolate the gondola from the balloon such that the flywheel can be accelerated or decelerated about a steady-state angular velocity to provide precise azimuthal pointing. The multiple-input/multiple-output nature of the azimuth pointing problem is best handled in a matrix synthesis procedure such as LQR. The controller design methodology is explained, and a combination of time responses and singular value analyses are used to analytically evaluate the performance of the control system. 11 refs., 17 figs.

  1. Investigation of flow regimes affecting the Mexico city region

    SciTech Connect

    Bossert, J.E.

    1997-02-01

    The Regional Atmospheric Modeling System (RAMS) in used to investigate the detailed mesoscale flow structure over the Mexico City region for a 3-day period in February 1991. The model simulation is compared with rawinsonde and tethersonde profile data and measurements from two surface stations in the southwestern part of Mexico City. The model results show that show that downward momentum transfer from aloft increases southerly winds near the surface on the first case day, effectively sweeping pollution from the basin surrounding Mexico City. Thermally driven circulations within the basin, in adjacent valleys, and over the slope of the Mexican Plateau strongly influence winds within the Mexico City basin on the second case day. These wind systems produce a complex interaction of flows, culminating in the propagation of a 1-km-deep density current circulation through Mexico City that displaces the polluted basin air mass aloft. Regional northeasterly flows develop early in the morning of the third case day and force the polluted basin air mass toward the southwestern portion of the basin where observed ozone concentrations are highest. The results show that both regional- and synoptic-scale flows influence the meteorology within the Mexico City basin over the 3-day period. The simulated circulation also provide a physical basis for understanding the high spatial and temporal variability of ozone concentrations observed over the city. 27 refs., 17 figs.

  2. Broadband measurements of electron cyclotron emission in TFTR (Tokamak Fusion Test Reactor) using a quasi-optical light collection system and a polarizing Michelson interferometer

    SciTech Connect

    Stauffer, F.J.; Boyd, D.A.; Cutler, R.C.; Diesso, M.; McCarthy, M.P.; Montague, J.; Rocco, R.

    1988-04-01

    For the past three years, a Fourier transform spectrometer diagnostic system, employing a fast-scanning polarizing Michelson interferometer, has been operating on the TFTR tokamak at Princeton Plasma Physics Laboratory. It is used to measure the electron cyclotron emission spectrum over the range 2.5 to 18 cm/sup /minus/1/ (75-540 GHz) with a resolution of 0.123 cm/sup /minus/1/(3.7 GHz), at a rate of 72 spectra per second. The quasi-optical system for collecting the light and transporting it through the interferometer to the detector has been designed using the concepts of both Gaussian and geometrical optics in order to produce a system that is efficient over the entire spectral range. The commerical Michelson interferometer was custom-made for this project and is at the state of the art for this type of specialized instrument. Various pre-installation and post-installation tests of the optical system and the interferometer were performed and are reported here. An error propagation analysis of the absolute calibration process is given. Examples of electron cyclotron emission spectra measured in two polarization directions are given, and electron temperature profiles derived from each of them are compared. 34 refs., 17 figs.

  3. Method and apparatus for capacitive deionization, electrochemical purification, and regeneration of electrodes

    DOEpatents

    Farmer, J.

    1995-06-20

    An electrochemical cell for capacitive deionization and electrochemical purification and regeneration of electrodes includes two oppositely disposed, spaced-apart end plates, one at each end of the cell. Two generally identical single-sided end electrodes, are arranged one at each end of the cell, adjacent to the end plates. An insulator layer is interposed between each end plate and the adjacent end electrode. Each end electrode includes a single sheet of conductive material having a high specific surface area and sorption capacity. In the preferred embodiment, the sheet of conductive material is formed of carbon aerogel composite. The cell further includes a plurality of generally identical double-sided intermediate electrodes that are equidistantly separated from each other, between the two end electrodes. As the electrolyte enters the cell, it flows through a continuous open serpentine channel defined by the electrodes, substantially parallel to the surfaces of the electrodes. By polarizing the cell, ions are removed from the electrolyte and are held in the electric double layers formed at the carbon aerogel surfaces of the electrodes. As the cell is saturated with the removed ions, the cell is regenerated electrically, thus significantly minimizing secondary wastes. 17 figs.

  4. Quantitative analysis of the hydrothermal system in Lassen Volcanic National Park and Lassen Known Geothermal Resource Area

    SciTech Connect

    Sorey, M.L.; Ingebritsen, S.E.

    1984-01-01

    The Lassen hydrothermal system is in the southern Cascade Range, approximately 70 kilometers east-southeast of Redding, California. The conceptual model of the Lassen system is termed a liquid-dominated hydrothermal system with a parasitic vapor-dominated zone. The essential feature of this model is that steam and steam-heated discharge at relatively high elevations in Lassen Volcanic National Park (LVNP) and liquid discharge with high chloride concentrations at relatively low elevations outside LVNP in the Lassen Known Geothermal Resource Area (KGRA) are both fed by an upflow of high-enthalpy, two-phase fluid within the Park. Liquid flows laterally away from the upflow area towards the areas of high-chloride discharge, and steam rises through a vapor-dominated zone to feed the steam and steam-heated features. The geometric model corresponds to an areally restricted flow regime that connects the Bumpass Hell area in LVNP with regions of chloride hot springs in the Mill Creek canyon in the KGRA south of LVNP. Simulations of thermal fluid withdrawal in the Mill Creek Canyon were carried out in order to determine the effects of such withdrawal on portions of the hydrothermal system within the Park. 19 refs., 17 figs., 4 tabs.

  5. Survey of Magnetic Fields Near BPA 230-kV and 500-kV Transmission Lines.

    SciTech Connect

    Perrin, Nancy; Aggarwal, Rajinder Pal; Bracken, T. Daniel

    1991-05-20

    The purpose of this study was to characterize typical levels and variability of 60Hz magnetic fields at the centerline and edge of right-of-way of Bonneville Power Administration (BPA) 230-kV and 500-kV transmission lines. This was accomplished by taking magnetic field measurements at over 800 spans in Oregon and Washington. The spans were sampled using a stratified random sampling procedure with region (East vs. West), voltage (230-kV vs 500-kV), and circuit configuration as strata. There were five different circuit configuration groups for each region/voltage category requiring a total of 200 strata. Magnetic field measurements were taken at 13 locations under each span using an EMDEX-C as a survey meter. Additional information recorded for each span included conductor height (at 10 locations), right-of-way width, longitudinal and lateral slope, time of day, vegetation, terrain, weather conditions, temperature, wind speed, span length and presence of other lines in the corridor. 9 refs., 17 figs., 26 tabs.

  6. MORSE/STORM: A generalized albedo option for Monte Carlo calculations

    SciTech Connect

    Gomes, I.C.; Stevens, P.N. )

    1991-09-01

    The advisability of using the albedo procedure for the Monte Carlo solution of deep penetration shielding problems that have ducts and other penetrations has been investigated. The use of albedo data can dramatically improve the computational efficiency of certain Monte Carlo calculations. However, the accuracy of these results may be unacceptable because of lost information during the albedo event and serious errors in the available differential albedo data. This study was done to evaluate and appropriately modify the MORSE/BREESE package, to develop new methods for generating the required albedo data, and to extend the adjoint capability to the albedo-modified calculations. Major modifications to MORSE/BREESE include an option to save for further use information that would be lost at the albedo event, an option to displace the point of emergence during an albedo event, and an option to use spatially dependent albedo data for both forward and adjoint calculations, which includes the point of emergence as a new random variable to be selected during an albedo event. The theoretical basis for using TORT-generated forward albedo information to produce adjuncton albedos was derived. The MORSE/STORM package was developed to perform both forward and adjoint modes of analysis using spatially dependent albedo data. Results obtained with MORSE/STORM for both forward and adjoint modes were compared with benchmark solutions. Excellent agreement and improved computational efficiency were achieved, demonstrating the full utilization of the albedo option in the MORSE code. 7 refs., 17 figs., 15 tabs.

  7. Determination of ecologically vital groundwaters at selected sites in the Formerly Utilized Sites Remedial Action Program

    SciTech Connect

    Vinikour, W.S.; Yin, S.C.L.

    1989-08-01

    The US Department of Energy is classifying groundwaters at sites in its Formerly Utilized Sites Remedial Action Program (FUSRAP). Of particular concern is the potential presence of groundwaters that are highly vulnerable to contamination and that are either (1) irreplaceable sources of drinking water or (2) ecologically vital. Conditions at nine FUSRAP sites were evaluated to determine if ecologically vital groundwaters are present. The sites evaluated were Wayne Interim Storage Site, Maywood Interim Storage Site, and Middlesex Sampling Plant in New Jersey; Ashland 2 Site, Seaway Industrial Park, Colonie Interim storage Site, and Niagara Falls Storage Site in New York; and the St. Louis Airport Site and Hazelwood Interim Storage Site in Missouri. The analyses indicated that groundwaters are vulnerable to contamination at all but two of the sites -- the Ashland 2 and Seaway Industrial Park sites in New York. Groundwater discharge points were identified within a 2-mile radius (i.e., the classification review area) of all of the sites. No ecologically vital groundwater areas exist in the vicinities of any of the nine FUSRAP sites evaluated. 35 refs., 17 figs.

  8. Compositions for chromosome-specific staining

    SciTech Connect

    Gray, J.W.; Pinkel, D.

    1998-05-26

    Methods and compositions for staining based upon nucleic acid sequence that employ nucleic acid probes are provided. The methods produce staining patterns that can be tailored for specific cytogenetic analyses. The probes are appropriate for in situ hybridization and stain both interphase and metaphase chromosomal material with reliable signals. The nucleic acid probes are typically of a complexity greater than 50 kb, the complexity depending upon the cytogenetic application. Methods are provided to disable the hybridization capacity of shared, high copy repetitive sequences and/or remove such sequences to provide for useful contrast. Still further methods are provided to produce chromosome-specific staining reagents which are made specific to the targeted chromosomal material, which can be one or more whole chromosomes, one or more regions on one or more chromosomes, subsets of chromosomes and/or the entire genome. Probes and test kits are provided for use in tumor cytogenetics, in the detection of disease related loci, in analysis of structural abnormalities, such as translocations, and for biological dosimetry. Methods and prenatal test kits are provided to stain targeted chromosomal material of fetal cells, including fetal cells obtained from maternal blood. The invention provides for automated means to detect and analyze chromosomal abnormalities. 17 figs.

  9. Flue gas desulfurization (FGD) chemistry and analytical methods handbook

    SciTech Connect

    Noblett, J.G.; Burke, J.M.

    1990-08-01

    The purpose of this handbook is to provide a comprehensive guide to sampling, analytical, and physical test methods essential to the operation, maintenance, and understanding of flue gas desulfurization (FGD) system chemistry. EPRI sponsored the first edition of this three-volume report in response to the needs of electric utility personnel responsible for establishing and operating commercial FGD analytical laboratories. The second, revised editions of Volumes 1 and 2 were prompted by the results of research into various non-standard aspects of FGD system chemistry. Volume 1 of the handbook explains FGD system chemistry in the detail necessary to understand how the processes operate and how process performance indicators can be used to optimize system operation. Volume 2 includes 63 physical-testing and chemical-analysis methods for reagents, slurries, and solids, and information on the applicability of individual methods to specific FGD systems. Volume 3 contains instructions for FGD solution chemistry computer program designated by EPRI as FGDLIQEQ. Executable on IBM-compatible personal computers, this program calculates the concentrations (activities) of chemical species (ions) in scrubber liquor and can calculate driving forces for important chemical reactions such as S0{sub 2} absorption and calcium sulfite and sulfate precipitation. This program and selected chemical analyses will help an FGD system operator optimize system performance, prevent many potential process problems, and define solutions to existing problems. 22 refs., 17 figs., 28 tabs.

  10. Integrated environmental control: Volume 1, Sample design strategy: Final report

    SciTech Connect

    Nold, D.G.; Baus, T.R.; Robie, C.P.

    1987-07-01

    The Volume 1 report for this study proposes an integrated design approach for coal-fired power plant environmental controls. Two characteristics distinguish the integrated environmental control (IEC) approach as defined in this study from historical design approaches. First, all major environmental control subsystems are considered to equally influence costs and overall plant performance until preliminary analysis indicates otherwise. This assures benefits derived for one subsystem (e.g., solid waste disposal) do not increase complexity for other subsystems (e.g., water management) to the level where total plant costs are higher. Second, the IEC approach maximizes compatibility between equipment, fuel properties, and site characteristics. This allows the least complex environmental control system (ECS), lowering cost and minimizing potential operating problems. The IEC design strategy, described in detail in Section 2 and Appendices A-D, can reduce ECS costs in two ways. First, the IEC approach helps insure cost savings derived for one subsystem are not offset by other increases, raising total ECS costs. Second, reliability can be increased and potential operating problems reduced if equipment and control strategies selected are most compatible with the site and fuel characteristics, and thus most simple. Selection of the best control strategy for given site and fuel characteristics is aided by a technical/economic analysis, described in Section 3, that allows ECS costs and technical features to be analyzed. 17 figs., 14 tabs.

  11. High speed transient sampler

    DOEpatents

    McEwan, T.E.

    1995-11-28

    A high speed sampler comprises a meandered sample transmission line for transmitting an input signal, a straight strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates along the transmission lines. The sampling gates comprise a four terminal diode bridge having a first strobe resistor connected from a first terminal of the bridge to the positive strobe line, a second strobe resistor coupled from the third terminal of the bridge to the negative strobe line, a tap connected to the second terminal of the bridge and to the sample transmission line, and a sample holding capacitor connected to the fourth terminal of the bridge. The resistance of the first and second strobe resistors is much higher than the signal transmission line impedance in the preferred system. This results in a sampling gate which applies a very small load on the sample transmission line and on the strobe generator. The sample holding capacitor is implemented using a smaller capacitor and a larger capacitor isolated from the smaller capacitor by resistance. The high speed sampler of the present invention is also characterized by other optimizations, including transmission line tap compensation, stepped impedance strobe line, a multi-layer physical layout, and unique strobe generator design. A plurality of banks of such samplers are controlled for concatenated or interleaved sample intervals to achieve long sample lengths or short sample spacing. 17 figs.

  12. Non-intrusive method of measuring PCV blowby constituents

    SciTech Connect

    Crane, M.E.; Ariga, S.; Boulard, R.; Lindamood, B.

    1994-10-01

    A technique is presented that has been successfully demonstrated to non-intrusively and quickly sample gases typically found in PCV systems. Color Detection Tubes (CDTs) were used with a simple sampling arrangement to monitor CO{sub 2}, NO{sub x}, O{sub 2}, and H{sub 2}O(g) at the closure line, crankcase, and PCV line. Measurements were accurate and could be made instantaneously. Short Path Thermal Desorbtion Tubes (SPTDTs) were used at the same engine locations for the characterization of fuel- and oil-derived hydrocarbon (HC) fractions and required only 50 cc samples. High engine loads caused pushover of blowby vapors as indicated by increased concentrations of CO{sub 2}, NO{sub x}, H{sub 2}O(g), and fuel HCs in the engines` fresh air inlets during WOT operation. Peak concentrations of blowby vapors were measured in the crankcase under no load and part throttle conditions. Oxygen concentrations always opposed the trends of CO{sub 2}, NO{sub x}, and H{sub 2}O(g). SPTDT data revealed that the PCV system consumes approximately 100-200 times more fuel vapors than oil vapors, on a mass basis; however, PCV-derived oil consumption represented almost 12 percent of total engine oil consumption under no load conditions. 8 refs., 17 figs.

  13. Magnetospheric equilibrium with anisotropic pressure

    SciTech Connect

    Cheng, C.Z.

    1991-07-01

    Self-consistent magnetospheric equilibrium with anisotropic pressure is obtained by employing an iterative metric method for solving the inverse equilibrium equation in an optimal flux coordinate system. A method of determining plasma parallel and perpendicular pressures from either analytic particle distribution or particle distribution measured along the satellite's path is presented. The numerical results of axisymmetric magnetospheric equilibrium including the effects of finite beta, pressure anisotropy, and boundary conditions are presented for a bi-Maxwellian particle distribution. For the isotropic pressure cases, the finite beta effect produces an outward expansion of the constant magnetic flux surfaces in relation to the dipole field lines, and along the magnetic field the toroidal ring current is maximum at the magnetic equator. The effect of pressure anisotropy is found to further expand the flux surfaces outward. Along the magnetic field lines the westward ring current can be peak away from the equator due to an eastward current contribution resulting from pressure anisotropy. As pressure anisotropy increases, the peak westward current can become more singular. The outer boundary flux surface has significant effect on the magnetospheric equilibrium. For the outer flux boundary resembling dayside compressed flux surface due to solar wind pressure, the deformation of the magnetic field can be quite different from that for the outer flux boundary resembling the tail-like surface. 23 refs., 17 figs.

  14. Computer modeling of fluid flow and combustion in the ISV (In Situ Vitrification) confinement hood

    SciTech Connect

    Johnson, R.W.; Paik, S.

    1990-09-01

    Safety and suitability objectives for the application of the In Situ Vitrification (ISV) technology at the INEL require that the physical processes involved in ISVV be modeled to determine their operational behavior. The mathematical models that have been determined to address the modeling needs adequately for the ISV analysis package are detailed elsewhere. The present report is concerned with the models required for simulating the reacting flow that occurs in the ISV confinement hood. An experimental code named COYOTE has been secured that appears adequate to model the combustion in the confinement hood. The COYOTE code is a two-dimensional, transient, compressible, Eulerian, gas dynamics code for modeling reactive flows. It recognizes nonuniform Cartesian and cylindrical geometry and is based on the ICE (Implicit Continuous-fluid Eulerian) family of solution methods. It includes models for chemical reactions based on chemical kinetics as well as equilibrium chemistry. The mathematical models contained in COYOTE, their discrete analogs, the solution procedure, code structure and some test problems are presented in the report. 12 refs., 17 figs., 6 tabs.

  15. Geographic analysis of thermal equilibria: A bioenergetic model for predicting thermal response of aquatic insect communities: Volume 1: Technical progress report, February 1, 1985-January 31, 1988

    SciTech Connect

    Vannote, R.L.; Sweeney, B.W.

    1987-01-01

    This report summarizes the principal research findings of both laboratory and field experiments on the effects of temperature on aquatic insects. It describes a large-scale laboratory experiment that tests the validity of a general model developed to predict the seasonal pattern of growth, development, and adult emergence of aquatic insect species at different locations in their geographic range. The report details the transition of the research program from its present focus on the ecology of stream and river insect populations to a program emphasizing the role of riparian biotic and geochemical factors in regulating the dynamics of stream systems. The long-term goals are to develop the functional relationships between alluvial floodplains and its drainage network. Initially, research will focus on mechanisms regulating input storage, transformation and release of nutrients between the riparian system and streams. Volume 1 reports on field studies of natural and thermally modified river systems, as well as laboratory studies on electrophoretic analysis of insects. 12 refs., 17 figs., 2 tabs.

  16. Reassessment of selected factors affecting siting of Nuclear Power Plants

    SciTech Connect

    Davis, R.E.; Hanson, A.L.; Mubayi, V.; Nourbakhsh, H.P.

    1997-02-01

    Brookhaven National Laboratory has performed a series of probabilistic consequence assessment calculations for nuclear reactor siting. This study takes into account recent insights into severe accident source terms and examines consequences in a risk based format consistent with the quantitative health objectives (QHOs) of the NRC`s Safety Goal Policy. Simplified severe accident source terms developed in this study are based on the risk insights of NUREG-1150. The results of the study indicate that both the quantity of radioactivity released in a severe accident as well as the likelihood of a release are lower than those predicted in earlier studies. The accident risks using the simplified source terms are examined at a series of generic plant sites, that vary in population distribution, meteorological conditions, and exclusion area boundary distances. Sensitivity calculations are performed to evaluate the effects of emergency protective action assumptions on the risk of prompt fatality and latent cancers fatality, and population relocation. The study finds that based on the new source terms the prompt and latent fatality risks at all generic sites meet the QHOs of the NRC`s Safety Goal Policy by margins ranging from one to more than three orders of magnitude. 4 refs., 17 figs., 24 tabs.

  17. Evaluation of external hazards to nuclear power plants in the United States

    SciTech Connect

    Kimura, C.Y.; Budnitz, R.J.

    1987-12-01

    The Lawrence Livermore National Laboratory (LLNL) has performed a study of the risk of core damage to nuclear power plants in the United States due to externally initiated events. The broad objective has been to gain an understanding of whether or not each external initiator is among the major potential accident initiators that may pose a threat of severe reactor core damage or of large radioactive release to the environment from the reactor. Four external hazards were investigated in this report. These external hazards are internal fires, high winds/tornadoes, external floods, and transportation accidents. Analysis was based on two figures-of-merit, one based on core damage frequency and the other based on the frequency of large radioactive releases. Using these two figures-of-merit as evaluation criteria, it has been feasible to ascertain whether the risk from externally initiated accidents is, or is not, an important contributor to overall risk for the US nuclear power plants studied. This has been accomplished for each initiator separately. 208 refs., 17 figs., 45 tabs.

  18. Precise leveling determination of surface uplift patterns at the New Hydraulic Fracturing Facility, Oak Ridge National Laboratory

    SciTech Connect

    Haase, C.S.; Stow, S.H.

    1988-05-01

    Surface uplift patterns were determined for five grout injections at the New Hydrofracture Facility (NHF) during the period July 1983 through January 1984. The uplift patterns are complex. In plan view, they are elliptical to almost circular and exhibit varying degrees of cross-sectional asymmetry with one side steeper than the other. The long axis of the ellipse is more or less parallel to geological strike. The uplift patterns vary in size, shape and asymmetry from injection to injection. The region of maximum uplift is typically offset with respect to the injection point, suggesting that most hydrofracture injections dip to the south-southeast. Approximately 40 to 60% of the uplift measured 5 days after an injection subsided within 30 to 45 days. In one case, all of the uplift subsided within 70 days of injection. Modeling of the uplift patterns by simple models, based on homogeneous, isotropic subsurface conditions, suggests that hydrofractures produced by the injections are either horizontal or have shallow dips to the south-southeast. Such orientations are consistent with the hydrofracture orientations determined by gamma-ray logging in observation wells surrounding the NHF site. 19 refs., 17 figs., 1 tab.

  19. Navy Radon Assessment and Mitigation Program

    SciTech Connect

    Bertini, H.W.; Dudney, C.S.; Wilson, D.L.; Wright, T.

    1990-12-01

    During the reporting period, June, 1 1989, through May 30, 1990, radon detectors were sent to all Department of the Navy installations that contained housing areas, childcare centers, schools, hospitals, bachelor quarters, and brigs. This action was part of the screening phase of the Navy Radon Assessment and Mitigation Program. Because of detector losses, a few facilities will require rescreening. The length of time the detectors are exposed in the buildings is dependent on the time or year they were placed and the time when the doors and windows are normally closed. A 3-month exposure time is sufficient for facilities that placed detectors in building when they would be closed. Otherwise detectors will be exposed for about 1 year. To date, about 9,000 detectors (out of a total of 27,100 detectors sent to the field) have been returned for a determination of exposure levels. About 2,000 detectors have been analyzed and the information sent to the Navel Facilities Engineering Command Headquarters for forwarding to the installations. Except for the additional installations requiring rescreening, the screening effort results should be available this calendar year. The rescreening results should be available by mid-1991. Assessment will start this calendar year based on the results from screening. Initial emphasis will be on housing, child-care centers, schools, and hospitals. 6 refs., 17 figs., 16 tabs.

  20. Three-dimensional detailed numerical model of a field-scale rotary kiln incinerator

    SciTech Connect

    Leger, C.B.; Cundy, V.A.; Sterling, A.M. )

    1993-04-01

    A detailed three-dimensional numerical model of baseline (support burners only) operation in a rotary kiln incinerator is presented. The focus of this model is on gas-phase fluid mechanics, neglecting solid waste combustion and radiative heat transfer. The model is compared to experimental data, and although relatively crude, it demonstrates remarkably good qualitative and quantitative predictive capability. The model demonstrates that thermal buoyancy is the cause of observed vertical stratification near the exit of the modeled kiln. The model also suggests that the addition of turbulence mixing air actually increases the degree of stratification rather than augmenting mixing, as had been previously suggested. Elucidating the mechanism by which this occurs has resulted in a reinterpretation of the experimental data. The model also suggests that there is probably a zone of recirculation across the kiln exit plane. A parametric study using the model shows that the location and quantity of leak air into the kiln have a major influence on the flow inside the kiln. The study suggests that preheating turbulence air may have little effect on gas-phase mixing. Overall, this modeling study has demonstrated that a relatively simple numerical model of a rotary kiln incinerator can provide valuable insight into the process, especially when used in conjunction with experimental data. 21 refs., 17 figs., 3 tabs.

  1. Leaching action of EJ-13 water on unirradiated UO{sub 2} surfaces under unsaturated conditions at 90{degree}C: Interim report

    SciTech Connect

    Wronkiewicz, D.J.; Bates, J.K.; Gerding, T.J.; Veleckis, E.; Tani, B.S.

    1991-07-01

    A set of experiments, based on the application of the Unsaturated Test method to the reaction of UO{sub 2} with EJ-13 water, has been conducted over a period of 182.5 weeks. One half of the experiments have been terminated, while one half are still ongoing. Solutions that have dripped from UO{sub 2} specimens have been analyzed for all experiments, while the reacted UO{sub 2} surfaces have been examined for only the terminated experiments. A pulse of uranium release from the UO{sub 2} solid, in conjunction with the formation of dehydrated schoepite on the surface of the UO{sub 2}, was observed during the 39- to 96-week period. Thereafter, the uranium release decreased and a second set of secondary phases was observed. The latter phases incorporate cations from the EJ-13 water and include boltwoodite, uranophane, sklodowskite, compreignacite, and schoepite. The experiments are being continued to monitor for additional changes in solution composition and secondary phase formation, and have now reached the 319-week period. 9 refs., 17 figs., 25 tabs.

  2. Genesis of presolar diamonds: Comparative high-resolution transmission electron microscopy study of meteoritic and terrestrial nano-diamonds

    SciTech Connect

    Daulton, T.L. |; Eisenhour, D.D.; Buseck, P.R.

    1996-12-01

    Nano-diamonds isolated from acid dissolution residues of primitive carbonaceous meteorites (Allende and Murchison) were studied using high-resolution transmission electron microscopy. To discriminate among their most likely formation mechanisms, high-pressure shock-induced metamorphism or low-pressure vapor condensation. the microstructures of presolar diamond crystallites were compared to those of (terrestrial) synthesized nano-diamonds. The synthesized diamonds used for comparison in this study were produced by high-pressure shock waves generated in controlled detonations and by direct nucleation and homoepitaxial growth from the vapor phase in low-pressure chemical vapor deposition (CVD)-type processes. Microstructural features were identified that appear unique to shock metamorphism and to nucleation from the vapor phase, respectively. A comparison of these features to the microstructures found in presolar diamonds indicates that the predominant mechanism for presolar diamond formation is a vapor deposition process, suggesting a circumstellar condensation origin. A new presolar grain component has also been identified in the meteoritic residues, the (2H) hexagonal polytype of diamond (lonsdaleite). 93 refs., 17 figs., 1 tab.

  3. Recommendations for the shallow-crack fracture toughness testing task within the HSST (Heavy-Section Steel Technology) Program

    SciTech Connect

    Theiss, T.J. )

    1990-09-01

    Recommendations for Heavy-Section Steel Technology Program's investigation into the influence of crack depth on the fracture toughness of a steel prototypic of those in a reactor pressure vessel are included in this report. The motivation for this investigation lies in the fact that probabilistic fracture mechanics evaluations show that shallow flaws play a dominant role in the likelihood of vessel failure, and shallow-flaw specimens have exhibited an elevated toughness compared with conventional deep-notch fracture toughness specimens. Accordingly, the actual margin of safety of vessels may be greater than that predicted using existing deep-notch fracture-toughness results. The primary goal of the shallow-crack project is to investigate the influence of crack depth on fracture toughness under conditions prototypic of a reactor vessel. A limited data base of fracture toughness values will be assembled using a beam specimen of prototypic reactor vessel material and with a depth of 100 mm (4 in.). This will permit comparison of fracture-toughness data from deep-cracked and shallow-crack specimens, and this will be done for several test temperatures. Fracture-toughness data will be expressed in terms of the stress-intensity factor and crack-tip-opening displacement. Results of this investigation are expected to improve the understanding of shallow-flaw behavior in pressure vessels, thereby providing more realistic information for application to the pressurized-thermal shock issues. 33 refs., 17 figs.

  4. Optical filter including a sub-wavelength periodic structure and method of making

    DOEpatents

    Kaushik, S.; Stallard, B.R.

    1998-03-10

    An optical filter includes a dielectric layer formed within a resonant optical cavity, with the dielectric layer having formed therein a sub-wavelength periodic structure to define, at least in part, a wavelength for transmission of light through the resonant optical cavity. The sub-wavelength periodic structure can be formed either by removing material from the dielectric layer (e.g. by etching through an electron-beam defined mask), or by altering the composition of the layer (e.g. by ion implantation). Different portions of the dielectric layer can be patterned to form one or more optical interference filter elements having different light transmission wavelengths so that the optical filter can filter incident light according to wavelength and/or polarization. For some embodiments, the optical filter can include a detector element in optical alignment with each optical interference filter element to quantify or measure the filtered light for analysis thereof. The optical filter has applications to spectrometry, colorimetry, and chemical sensing. 17 figs.

  5. Steam-explosion safety considerations for the Advanced Neutron Source Reactor at the Oak Ridge National Laboratory

    SciTech Connect

    Taleyarkhan, R.

    1990-02-01

    This report provides a perspective on steam-explosion safety and design issues for the Advanced Neutron Source (ANS) reactor being designed at the Oak Ridge National Laboratory. A historical background along with a description of experiments and analytical work performed to date has been provided. Preliminary analyses (for the ANS) have been conducted to evaluate steam-explosion pressure- pulse loadings, the effects of reactor coolant system (RCS) overpressurization, and slug energetics. The method used for pressure-pulse magnitude evaluation was benchmarked with previous calculations, an aluminum-water steam-explosion experiment, and test reactor steam explosion data with good agreement. Predicted pressure-pulse magnitudes evaluated were found to be several orders of magnitude lower than corresponding values evaluated by correlating available energies with shock-wave pressures from equivalent chemical detonations. The preliminary best estimate, as well as conservative estimates for RCS volume-pressurization failure and slug energetics for RCS volume-pressurization failure and slug energetics, indicated that (1) steam explosions in the ANS have significant damage potential, and (2) steam-explosion issues must be considered during the design phase of the ANS Project. Recommendations are made for efficiently addressing this important safety and design issue. 38 refs., 17 figs., 11 tabs.

  6. Progress report on the use of hybrid silicon pin diode arrays in high energy physics

    SciTech Connect

    Shapiro, S.L. ); Jernigan, J.G.; Arens, J.F. . Space Sciences Lab.)

    1990-05-01

    We report on the successful effort to develop hybrid PIN diode arrays and to demonstrate their potential as components of vertex detectors. Hybrid pixel arrays have been fabricated by the Hughes Aircraft Co. by bump-bonding readout chips developed by Hughes to an array of PIN diodes manufactured by Micron Semiconductor Inc. These hybrid pixel arrays were constructed in two configurations. One array format has 10 {times} 64 pixels, each 120 {mu}m square; and the other format has 256 {times} 156 pixels, each 30 {mu}m square. In both cases, the thickness of the PIN diode layer is 300 {mu}m. Measurements of detector performance show that excellent position resolution can be achieved by interpolation. By determining the centroid of the charge cloud which spreads charge into a number of neighboring pixels, a spatial resolution of a few microns has been attained. The noise has been measured to be about 300 electrons (rms) at room temperature, as expected from KTC and dark current considerations, yielding a signal-to-noise ratio of about 100 for minimum ionizing particles. 4 refs., 17 figs.

  7. Apparatus for and method of testing an electrical ground fault circuit interrupt device

    DOEpatents

    Andrews, L.B.

    1998-08-18

    An apparatus for testing a ground fault circuit interrupt device includes a processor, an input device connected to the processor for receiving input from an operator, a storage media connected to the processor for storing test data, an output device connected to the processor for outputting information corresponding to the test data to the operator, and a calibrated variable load circuit connected between the processor and the ground fault circuit interrupt device. The ground fault circuit interrupt device is configured to trip a corresponding circuit breaker. The processor is configured to receive signals from the calibrated variable load circuit and to process the signals to determine a trip threshold current and/or a trip time. A method of testing the ground fault circuit interrupt device includes a first step of providing an identification for the ground fault circuit interrupt device. Test data is then recorded in accordance with the identification. By comparing test data from an initial test with test data from a subsequent test, a trend of performance for the ground fault circuit interrupt device is determined. 17 figs.

  8. Method and apparatus for assembling solid oxide fuel cells

    DOEpatents

    Szreders, B.E.; Campanella, N.

    1988-05-11

    This invention relates generally to solid oxide fuel power generators and is particularly directed to improvements in the assembly and coupling of solid oxide fuel cell modules. A plurality of jet air tubes are supported and maintained in a spaced matrix array by a positioning/insertion assembly for insertion in respective tubes of a solid oxide fuel cell (SOFC) in the assembly of an SOFC module. The positioning/insertion assembly includes a plurality of generally planar, elongated, linear vanes which are pivotally mounted at each end thereof to a support frame. A rectangular compression assembly of adjustable size is adapted to receive and squeeze a matrix of SOFC tubes so as to compress the inter-tube nickel felt conductive pads which provide series/parallel electrical connection between adjacent SOFCs, with a series of increasingly larger retainer frames used to maintain larger matrices of SOFC tubes in position. Expansion of the SOFC module housing at the high operating temperatures of the SOFC is accommodated by conductive, flexible, resilient expansion, connector bars which provide support and electrical coupling at the top and bottom of the SOFC module housing. 17 figs.

  9. The proton storage ring: Problems and solutions

    SciTech Connect

    Macek, R.J.

    1988-01-01

    The Los Alamos Proton Storage Ring (PSR) now operates with 35..mu..A at 20-Hz pulse repetition rate. Beam availability during 1988 suffered because of a number of problems with hardware reliability and from narrow operating margins for beam spill in the extraction line. A strong effort is underway to improve reliability with an eventual goal of obtaining beam availability in excess of 75%. Beam losses and the resulting component activation have limited operating currents to their present values. In detailed studies of the problem, loss rates were found to be approximately proportional to the circulating current and can be understood by a detailed accounting of emittance growth in the two-step injection process along with Coulomb scattering of the stored beam during multiple traversals of the injection foil. It is now apparent that the key to reducing losses is in reducing the number of foil traversals. A program of upgrades to reduce losses and improve the operating current is being planned. 8 refs., 17 figs., 2 tabs.

  10. Basis for the ICRP`s age-specific biokinetic model for uranium

    SciTech Connect

    Leggett, R.W.

    1994-12-01

    In an effort motivated largely by the Chernobyl nuclear accident, the International Commission on Radiological Protection (ICRP) is developing age-specific biokinetic models and dose coefficients for environmentally important radionuclides. This paper describes the ICRP`s age-specific biokinetic model for uranium. The model is constructed within a physiologically based framework originally developed for application to the alkaline earth elements but sufficiently general to apply to the larger class of bone-volume-seeking elements. Transfer rates for a reference adult are based mainly on: (1) measurements of uranium in blood and excreta of several human subjects who were intravenously injected with uranium; (2) postmortem measurements of uranium in tissues of some of those subjects; (3) postmortem measurements of uranium in tissues of occupationally and non-occupationally exposed subjects; (4) data on baboons, dogs, and smaller laboratory animals exposed to uranium for experimental purposes; and (5) consideration of the physiological processes thought to control retention and translocation of uranium in the body. Transfer rates for the adult are extended to children by application of a set of generic assumptions applied by the ICRP to calcium-like elements. These assumptions were derived mainly from observations of the age-specific biokinetics of the alkaline earth elements and lead in humans and laboratory animals but are consistent with available age-specific biokinetic data on uranium. 82 refs., 17 figs., 8 tabs.

  11. Fuels from microalgae

    SciTech Connect

    Not Available

    1989-06-01

    Many species of aquatic plants can provide a source of renewable energy. Some species of microalgae, in particular, produce lipids -- oils that can be extracted and converted to a diesel fuel substitute or to gasoline. Since 1979 the Aquatic Species Program element of the Biofuels Program, has supported fundamental and applied research to develop the technology for using this renewable energy resource. This document, produced by the Solar Technical Information Program, provides an overview of the DOE/SERI Aquatic Species Program element. Chapter 1 is an introduction to the program and to the microalgae. Chapter 2 is an overview of the general principles involved in making fuels from microalgae. It also outlines the technical challenges to producing economic, high-energy transportation fuels. Chapter 3 provides an overview of the Algal Production and Economic Model (APEM). This model was developed by researchers within the program to identify aspects of the process critical to performance with the greatest potential to reduce costs. The analysis using this model has helped direct research sponsored by the program. Finally, Chapter 4 provides an overview of the Aquatic Species Program and describes current research. 28 refs., 17 figs.

  12. Torsional rheometer for granular materials slurries and gas-solid mixtures and related methods

    DOEpatents

    Rajagopal, C.; Rajagopal, K.R.; Yalamanchili, R.C.

    1997-03-11

    A torsional rheometer apparatus for determining rheological properties of a specimen is provided. A stationary plate and a rotatable plate are in generally coaxial position and structured to receive a specimen there between. In one embodiment, at least one of the plates and preferably both have roughened specimen engaging surfaces to serve to reduce undesired slippage between the plate and the specimen. A motor is provided to rotate the rotatable plate and a transducer for monitoring forces applied to the stationary plate and generating output signals to a computer which determines the desired rheological properties are provided. In one embodiment, the roughened surfaces consist of projections extending toward the specimen. Where granular material is being evaluated, it is preferred that the roughness of the plate is generally equal to the average size of the granular material being processed. In another embodiment, an air-solid mixture is processed and the roughened portions are pore openings in the plates. Air flows through the region between the two pore containing plates to maintain the solid materials in suspension. In yet another embodiment, the base of the stationary plate is provided with a deformable capacitance sensor and associated electronic means. 17 figs.

  13. Constrained space camera assembly

    DOEpatents

    Heckendorn, F.M.; Anderson, E.K.; Robinson, C.W.; Haynes, H.B.

    1999-05-11

    A constrained space camera assembly which is intended to be lowered through a hole into a tank, a borehole or another cavity is disclosed. The assembly includes a generally cylindrical chamber comprising a head and a body and a wiring-carrying conduit extending from the chamber. Means are included in the chamber for rotating the body about the head without breaking an airtight seal formed therebetween. The assembly may be pressurized and accompanied with a pressure sensing means for sensing if a breach has occurred in the assembly. In one embodiment, two cameras, separated from their respective lenses, are installed on a mounting apparatus disposed in the chamber. The mounting apparatus includes means allowing both longitudinal and lateral movement of the cameras. Moving the cameras longitudinally focuses the cameras, and moving the cameras laterally away from one another effectively converges the cameras so that close objects can be viewed. The assembly further includes means for moving lenses of different magnification forward of the cameras. 17 figs.

  14. Protective supplied breathing air garment

    DOEpatents

    Childers, E.L.; Hortenau, E.F. von.

    1984-07-10

    A breathing air garment is disclosed for isolating a wearer from hostile environments containing toxins or irritants includes a suit and a separate head protective enclosure or hood engaging a suit collar in sealing attachment. The hood and suit collar are cylindrically shaped and dimensioned to enable the wearer to withdraw his hands from the suit sleeves to perform manual tasks within the hood interior. Breathing air is supplied from an external air line with an air delivery hose attached to the hood interior. The hose feeds air into an annular halo-like fiber-filled plenum having spaced discharge orifices attached to the hood top wall. A plurality of air exhaust/check valves located at the suit extremities cooperate with the hood air delivery system to provide a cooling flow of circulating air from the hood throughout the suit interior. A suit entry seal provided on the suit rear torso panel permits access into the suit and is sealed with an adhesive sealing flap. 17 figs.

  15. In-Home Performance of Exempt Pellet Stoves in Medford, Oregon.

    SciTech Connect

    Barnett, Stockton G.; Fields, Paula G.

    1991-07-05

    Pellet stoves that are considered exempt'' operate at an air-to-fuel ratio in excess of 35:1. They therefore qualify for exemption from the emissions certification process. A primary goal of this project was to determine how a sample of such stoves, operated in homes, would perform compared to their certified cousins,'' which were evaluated the previous year. In-home performance data documenting emissions from exempt stoves and net delivered efficiencies was particularly desired. This project evaluated six pellet stoves representing three major brands in Medford, Oregon. There were three Breckwell model P24FS, one Horizon Eclipse, one Horizon Destiny, and one Earth Stove TP40. The stoves were monitored for four week-long intervals in January and February 1991, for a total of 24 tests. Evaluations were conducted for particulate, CO (carbon monoxide) and PAH (polycyclic aromatic hydrocarbon) emissions and net efficiency. Monitoring was conducted using the AWES (automated woodstove emissions sampler) sampling system. A new data logger, developed for this project, was used to control the AWES and record real time data. 22 refs., 17 figs., 6 tabs.

  16. Long-term performance assessment of grouted phosphate/sulfate waste from N Reactor operations

    SciTech Connect

    Sewart, G.H.; Farris, W.T.; Huizenga, D.G.; McMakin, A.H.; Streile, G.P.; Treat, R.L.

    1987-04-01

    Phosphate sulfate waste (PSW) is a low-level liquid generated by activities associated with N Reactor operations. The waste will be mixed with dry solids and permanently disposed of as a cementitious grout in sub-surface concrete vaults at Hanford's 200-East Area. Categories of scenarios were analyzed that could cause humans to be exposed to radionuclides and chemicals from the grouted waste include contaminated groundwater and direct intrusion. In the groundwater scenario, contaminants are released from the buried grout monoliths, then eventually transported via the groundwater to the Columbia River. As modeled, the contaminants are assumed to leach out of the monoliths at a constant rate over a 10,000-year period. The other category of exposure involves intruders who inadvertently contact the waste directly, either by drilling, excavating, or gardening. Long-term impacts that could result from disposal of PSW grout were expressed in terms of incremental increases of chemical concentrations in the groundwater and surface waters, and radiation doses. None of the calculated impacts exceeded the corresponding regulatory limits set by Washington State, the Department of Energy, or the Nuclear Regulatory Commission. 38 refs., 17 figs., 27 tabs.

  17. New industrial heat pump applications to fructose production

    SciTech Connect

    Not Available

    1990-04-01

    An energy cost reduction study of the American Fructose Decatur,Inc. High Fructose Corn Syrup process has been completed. The objective was to find cost effective energy cost reduction projects and to develop a coherent strategy for realizing the savings. There are many possible options for reducing energy cost. To facilitate a fair comparison of the options, Pinch Technology was used to identify appropriate heat recovery, heat pumping and cogeneration options. Of particular interest were the opportunities for utilizing heat pumps, for energy cost reduction or other profit increasing uses. Therefore, where a heat pumping scheme was identified, its merits relative to other potential projects was carefully evaluated to ensure that the heat pump was technically and economically sound. It is felt that the results obtained in this study are applicable to other wet corn milling sites which include a refinery section, due to the similarity of processes throughout the industry. This study and others indicate that reductions in thermal energy consumption of 15--25% can be expected through increased heat recovery. Also, the use of MVR and thermocompression evaporators is appropriate and additional economically viable opportunities exist for using industrial heat pumps to increase even further the level of energy cost reduction achievable. 17 figs., 4 tabs.

  18. Environmental surveillance data report for the third quarter of 1987

    SciTech Connect

    Daniels, K.L.; Goldberg, P.Y.; Horwedel, B.M.; McCollough, I.L.; Osborne-Lee, A.E.; Owenby, R.K.; Watson, J.B.; Wilson, M.M.

    1987-12-01

    During the third quarter of 1987, over 1600 samples which represent more than 5000 analyses and measurements were collected by the Environmental Monitoring and Compliance (EMC) Department. Uranium concentrations measured on air filters near the Y-12 plant were higher than normal due to a release from that facility in May. More than 60% of the noncompliances with the NPDES permit for the third quarter occurred in July. These were primarily in total suspended solids at the Sewage Treatment Plant. The cause of these high concentrations has been explored with the plant operating staff but is currently unresolved. Because of past noncompliances in fecal coliform and chlorine concentrations at the Sewage Treatment Plant, an engineering review has been initiated to examine the present chlorination system. This review is intended to provide a permanent solution to these types of problems. Maximum concentrations of total radioactive strontium (/sup 89/Sr + /sup 90/Sr) in bluegill were lower than those measured during the second quarter. There were not significant differences in the total radioactive strontium in blue gill at any of the Clinch River locations. 17 figs., 45 tabs.

  19. Test design description for the Fusion Materials Open Test Assembly (Fusion MOTA-2A): Volume 1A, Part 1

    SciTech Connect

    Bauer, R.E.

    1988-11-01

    This document encompasses the test requirements, hardware design, fabrication, and safety analysis for the Fusion Materials Open Test Assembly experiment for irradiation in FFTF Cycle 11 (Fusion MOTA-2A). Fusion MOTA is equally shared by the US Fusion Material (DOE), Japanese Fusion Materials (MONBUSHO), and BEATRIX-II (IEA) programs. In the interest of providing optimum use of the irradiation space in the Fusion MOTA-2A and LMR MOTA-1G, eight of the Fusion MOTA canisters will be placed in MOTA-1G and an equal number of LMR canisters placed in Fusion MOTA-2A (Powell/Doran 1988). This eliminates the need to process Fusion MOTA-2A through the IEM cell prior to insertion for FFTF Cycle 11A. The LMR MOTA design and safety analysis (Greenslade 1984) is the basis for much of this design and safety analysis report. This design description and safety analysis for the Fusion MOTA-2A is presented per the outline given in Chapter IV of the FTR User`s Guide (Taylor 1978). 35 refs., 17 figs., 9 tabs.

  20. A method for designing a redirector/reconcentrator for use at the Central Receiver Test Facility (CRTF)

    SciTech Connect

    Ghanbari, C.M.; Mulholland, G.P.; Otts, J.V.

    1989-01-01

    The Central Receiver Test Facility (CRTF), operated for the Department of Energy by Sandia National Laboratories in Albuquerque, New Mexico, was constructed to evaluate design concepts for solar central receivers. The facility consists of an array of 222 heliostats in a northfield configuration that reflects and focuses the sun's energy toward a tower 60 m high. Throughout the history of the CRTF, there has been an interest in beam redirectors or reconcentrators. The objective of this paper is to discuss the numerous code modifications required for the facility code HELIOS to be able to model the redirector-radome configuration. This model simulates the solar flux-density pattern from reflecting concentrators and follows the incident solar radiation through the atmosphere, the collection system, and finally onto the target. The model includes most pertinent factors that influence the optical performance of a collector system. Although the standard output contains information concerning sun shape distributions and atmospheric attenuation, probably the most useful output is the flux-density pattern at a grid of points on a receiver surface and the integral of this distribution over the surface to obtain power. 3 refs., 17 figs.

  1. Mechanical integrity test methods for Class 2 injection wells

    SciTech Connect

    Smith, K.P.

    1991-03-01

    Mechanical integrity testing of injection wells to ensure that they do not threaten an underground source of drinking water (USDW) is a key component of the Underground Injection Control (UIC) program of the Safe Drinking Water Act of 1974. Approximately 55% of all active injection wells are classified as Class II wells. These wells are used by the oil and gas industry primarily to dispose of waste fluids or to enhance production of hydrocarbons. Mechanical integrity is defined as the absence of significant leaks in the casing, tubing, or packers (internal integrity); and the absence of significant fluid movement into a USDW through cement channels behind the casing (external integrity). A wide variety of mechanical integrity test (MIT) methods have been developed to meet federal and primacy state program requirements. The internal mechanical integrity of standard injection wells can be evaluated by radioactive tracer surveys, standard annular pressure tests, annulus pressure monitoring, and continuous injection pressure versus injection rate monitoring. These tests are listed in order of decreasing reliability and increasing detection limits. 28 refs., 17 figs., 6 tabs.

  2. A study of surfactant-assisted waterflooding

    SciTech Connect

    Scamehorn, J F; Harwell, J H

    1990-09-01

    In surfactant-assisted waterflooding, a surfactant slug is injected into a reservoir, followed by a brine spacer, followed by second surfactant slug. The charge on the surfactant in the first slug has opposite sign to that in the second slug. When the two slugs mix in the reservoir, a precipitate or coacervate is formed which plugs the permeable region of the reservoir. Subsequently injected water or brine is forced through the low permeability region of the reservoir, increasing sweep efficiency of the waterflood, compared to a waterflood not using surfactants. In this part of the work, two major tasks are performed. First, core floods are performed with oil present to demonstrate the improvement in incremental oil production, as well as permeability modification. Second, a reservoir simulation model will be proposed to further delineate the optimum strategy for implementation of the surfactant-assisted waterflooding, as well as indicate the reservoir types for which it would be most effective. Surfactants utilized were sodium dodecyl sulfate and dodecyl pyridinium chloride. 44 refs., 17 figs., 3 tabs.

  3. Details: MHD topping cycle analysis and component design. Volume II. Final report

    SciTech Connect

    Not Available

    1984-06-01

    The MHD generator performances were calculated for the prototype retrofit MHD power system and for the 50 MW/sub th/ and 80 MW/sub th/ CDIF MHD power systems. The generators were all designed to operate with preheated (1200/sup 0/F) oxygen-enriched air and Montana Rosebud coal dried to 5% moisture content. Fuel-rich conditions were used in the MHD combustion process for NO/sub x/ emission control with an oxidizer/fuel equivalence ratio of 0.9. The seed concentration was 1% potassium by weight of the total combustion gas. Table 1 summarizes the important parameters for the three selected MHD generator designs. The basic calculational procedure adopted in APT Task I is followed in the present analyses in order to determine the operating conditions of the MHD generator. This procedure was used to ensure that the generator will produce optimum power output consistent with a set of prescribed generator constraints. In all generator designs, the critical electrical and thermal stresses of the channel and its gasdynamic design parameters were limited to values which are reasonable based on the experience gained from long duration MHD channel testing. 17 figs., 6 tabs.

  4. Chaos of Wolbachia Sequences Inside the Compact Fig Syconia of Ficus benjamina (Ficus: Moraceae)

    PubMed Central

    Niu, Li-Ming; Ma, Guang-Chang; Cook, James M.; Bian, Sheng-Nan; Fu, Yue-Guan; Huang, Da-Wei

    2012-01-01

    Figs and fig wasps form a peculiar closed community in which the Ficus tree provides a compact syconium (inflorescence) habitat for the lives of a complex assemblage of Chalcidoid insects. These diverse fig wasp species have intimate ecological relationships within the closed world of the fig syconia. Previous surveys of Wolbachia, maternally inherited endosymbiotic bacteria that infect vast numbers of arthropod hosts, showed that fig wasps have some of the highest known incidences of Wolbachia amongst all insects. We ask whether the evolutionary patterns of Wolbachia sequences in this closed syconium community are different from those in the outside world. In the present study, we sampled all 17 fig wasp species living on Ficus benjamina, covering 4 families, 6 subfamilies, and 8 genera of wasps. We made a thorough survey of Wolbachia infection patterns and studied evolutionary patterns in wsp (Wolbachia Surface Protein) sequences. We find evidence for high infection incidences, frequent recombination between Wolbachia strains, and considerable horizontal transfer, suggesting rapid evolution of Wolbachia sequences within the syconium community. Though the fig wasps have relatively limited contact with outside world, Wolbachia may be introduced to the syconium community via horizontal transmission by fig wasps species that have winged males and visit the syconia earlier. PMID:23145008

  5. The International Coal Statistics Data Base operations guide

    SciTech Connect

    Not Available

    1991-04-01

    The International Coal Statistics Data base (ICSD) is a micro- computer based system which contains informations related to international coal trade. This includes coal production, consumption, imports and exports information. The ICSD is a secondary data base, meaning that information contained therein is derived entirely from other primary sources. It uses dBase 3+ and Lotus 1-2-3 to locate, report and display data. The system is used for analysis in preparing the Annual Prospects for World Coal Trade (DOE/EIA-0363) publication. The ICSD system is menu driven, and also permits the user who is familiar with dBase and Lotus operations to leave the menu structure to perform independent queries. Documentation for the ICSD consists of three manuals -- the User's Guide, the Operations Manual and the Program Maintenance Manual. This Operations Manual explains how to install the programs, how to obtain reports on coal trade, what systems requirements apply, and how to update the major data files. It also explains file naming conventions, what each file does, and the programming procedures used to make the system work. The Operations Manual explains how to make the system respond to customized queries. It is organized around the ICSD menu structure and describes what each selection will do. Sample reports and graphs generated from individual menu selection are provided to acquaint the user with the various types of output. 17 figs.

  6. Development of a current collection loss management system for SDI homopolar power supplies

    SciTech Connect

    Brown, D.W.

    1989-01-01

    High speed, high power density current collection systems have been identified as an enabling technology required to construct homopolar power supplies to meet SDI missions. This work is part of a three-year effort directed towards the analysis, experimental verification, and prototype construction of a current collection system designed to operate continuously at 2 kA/cm{sup 2}, at a rubbing speed of 200 m/s, and with acceptable losses in a space environment. To data, no system has achieved these conditions simultaneously. This is the annual report covering the second year period of performance on DOE contract DE-AC03-86SF16518. Major areas covered include design, construction and operation of a cryogenically cooled brush test rig, design and construction of a high speed brush test rig, optimization study for homopolar machines, loss analysis of the current collection system, and an application study which defines the air-core homopolar construction necessary to achieve the goal of 80--90 kW/kg generator power density. 17 figs., 2 tabs.

  7. Chaos of Wolbachia sequences inside the compact fig syconia of Ficus benjamina (Ficus: moraceae).

    PubMed

    Yang, Chun-Yan; Xiao, Jin-Hua; Niu, Li-Ming; Ma, Guang-Chang; Cook, James M; Bian, Sheng-Nan; Fu, Yue-Guan; Huang, Da-Wei

    2012-01-01

    Figs and fig wasps form a peculiar closed community in which the Ficus tree provides a compact syconium (inflorescence) habitat for the lives of a complex assemblage of Chalcidoid insects. These diverse fig wasp species have intimate ecological relationships within the closed world of the fig syconia. Previous surveys of Wolbachia, maternally inherited endosymbiotic bacteria that infect vast numbers of arthropod hosts, showed that fig wasps have some of the highest known incidences of Wolbachia amongst all insects. We ask whether the evolutionary patterns of Wolbachia sequences in this closed syconium community are different from those in the outside world. In the present study, we sampled all 17 fig wasp species living on Ficus benjamina, covering 4 families, 6 subfamilies, and 8 genera of wasps. We made a thorough survey of Wolbachia infection patterns and studied evolutionary patterns in wsp (Wolbachia Surface Protein) sequences. We find evidence for high infection incidences, frequent recombination between Wolbachia strains, and considerable horizontal transfer, suggesting rapid evolution of Wolbachia sequences within the syconium community. Though the fig wasps have relatively limited contact with outside world, Wolbachia may be introduced to the syconium community via horizontal transmission by fig wasps species that have winged males and visit the syconia earlier.

  8. Apparatus for measuring minority carrier lifetimes in semiconductor materials

    DOEpatents

    Ahrenkiel, R.K.

    1999-07-27

    An apparatus for determining the minority carrier lifetime of a semiconductor sample includes a positioner for moving the sample relative to a coil. The coil is connected to a bridge circuit such that the impedance of one arm of the bridge circuit is varied as sample is positioned relative to the coil. The sample is positioned relative to the coil such that any change in the photoconductance of the sample created by illumination of the sample creates a linearly related change in the input impedance of the bridge circuit. In addition, the apparatus is calibrated to work at a fixed frequency so that the apparatus maintains a consistently high sensitivity and high linearly for samples of different sizes, shapes, and material properties. When a light source illuminates the sample, the impedance of the bridge circuit is altered as excess carriers are generated in the sample, thereby producing a measurable signal indicative of the minority carrier lifetimes or recombination rates of the sample. 17 figs.

  9. Geochemical and geologic factors effecting the formulation of gas hydrate: Task No. 5, Final report

    SciTech Connect

    Kvenvolden, K.A.; Claypool, G.E.

    1988-01-01

    The main objective of our work has been to determine the primary geochemical and geological factors controlling gas hydrate information and occurrence and particularly in the factors responsible for the generation and accumulation of methane in oceanic gas hydrates. In order to understand the interrelation of geochemical/geological factors controlling gas hydrate occurrence, we have undertaken a multicomponent program which has included (1) comparison of available information at sites where gas hydrates have been observed through drilling by the Deep Sea Drilling Project (DSDP) on the Blake Outer Ridge and Middle America Trench; (2) regional synthesis of information related to gas hydrate occurrences of the Middle America Trench; (3) development of a model for the occurrence of a massive gas hydrate as DSDP Site 570; (4) a global synthesis of gas hydrate occurrences; and (5) development of a predictive model for gas hydrate occurrence in oceanic sediment. The first three components of this program were treated as part of a 1985 Department of Energy Peer Review. The present report considers the last two components and presents information on the worldwide occurrence of gas hydrates with particular emphasis on the Circum-Pacific and Arctic basins. A model is developed to account for the occurrence of oceanic gas hydrates in which the source of the methane is from microbial processes. 101 refs., 17 figs., 6 tabs.

  10. Mechanisms for selective agglomeration of coals

    SciTech Connect

    Wheelock, T.D.; Drzymala, J.; Allen, R.W.; Hu, Y.-C.; Tyson, D.; Xiaoping, Qiu; Lessa, A.

    1989-05-01

    Work continued on the basic mechanisms which underlie various processes for beneficiating aqueous suspensions of coal by selective agglomeration with oil. A new method was demonstrated for characterizing the agglomerability of coal suspensions. This method utilizes a photometric dispersion analyzer to monitor changes in the turbidity of a particle suspension as increasing amounts of oil are added to the suspension in a batch agglomeration test. Agglomeration of the particles leads to a marked decrease in the turbidity of the suspension. Another experimental technique was also demonstrated for characterizing oil agglomeration. This technique involves measuring the rate of growth of agglomerates in a continuous flow system operating under stead-state conditions. The data are analyzed by means of a population balance. The results of a preliminary set of experiments in which Indiana V seam coal was agglomerated with tetralin seemed to fit a particular growth model very well. Equipment was also constructed for studying the kinetics of agglomeration in a batch process. While earlier work showed that quebracho (a commercially available dispersant) is a strong agglomeration depressant for pyrite, recent experiments with mixtures of Upper Freeport coal and mineral pyrite showed that quebracho does not appear to be sufficiently selective. Further consideration was given to the separation of mixtures of coal and pyrite agglomeration with heptane. 2 refs., 17 figs., 1 tab.

  11. Micromechanisms of deformation and fracture in ordered intermetallic alloys: 1, Strengthening mechanisms. [Ni/sub 3/Al and CuZn

    SciTech Connect

    Yoo, M.H.; Horton, J.A.; Liu, C.T.

    1988-07-01

    The stability and mobility of active slip and twin modes in superlattice structures, for both cubic and noncubic crystals, are theoretically investigated based on the energetics and kinetics of dislocation dissociations. The main concept of the force couplet model for the positive temperature dependence of yield and flow stresses is introduced. Two sources of the glide resistance in ordered lattices are the fault dragging mechanism and the cross-slip pinning mechanism. The effective fault energy consists of two terms related to the chemical and mechanical instability of a shear fault (antiphase boundary, superlattice intrinsic stacking fault, or microtwin). Dependence of the yield stress on the orientation and the sense of applied stress stems from the signs and magnitudes of the glide and nonglide stresses. As the effective fault energy is altered by solute segregation and/or high nonglide stress, the two glide resistance mechanisms are affected differently. In Ni/sub 3/Al and ..beta..-CuZn, the major aspects of anomalous yield strength, strain rate sensitivity, in situ deformation transmission electron microscopy observations, microtwinning, and nonstoichiometry effect are discussed in view of the present model. In addition, the order twinning-slip conjugate relationship is identified, in all the superlattice structures considered, which will influence the deformation behavior by viscous glide at high temperatures. 106 refs., 17 figs., 5 tabs.

  12. Development of on-farm oil recovery and processing methods: Final report

    SciTech Connect

    Goodrum, J.W.; Kilgo, M.B.

    1987-09-02

    Using supercritical carbon dioxide (SC-CO2), peanut oil was extracted from ground peanuts at pressures of 2000 to 10,000 psi and temperatures of 25-120/degree/ C. Above 6000 psi, increasing the temperature to the maximum possible without heavily charring the peanuts (120/degree/C) significantly increased the initial extraction rate. Increasing the pressure at constant temperature increased the rate. At higher temperatures (75/degree/ C and above) roasting began to occur, however, this was not detrimental to the extraction rate or overall oil recovery. Decreasing the particle size increases the overall yield per batch of peanuts as seen in both the half factorial and particle size experiments. Increasing the moisture increases the amount of volatiles lost. The flow rate does not affect the solubility, percent oil recovered or volatiles lost for flow rates of 40 to 60 liters CO2/minute at STP. Recovery of peanut and rapeseed oil with a combined process of partial recovery in a screw press plus extraction of the remaining oil with SC-CO2 is technically a viable alternative to other oil recovery methods. Oil recoveries of 95% (peanuts) and 75% (rapeseed) have been demonstrated. The initial extraction rate for rapeseed was consistently lower than the rate for peanuts at the same extraction temperature and pressure. No differences in SC-CO2 extraction rates or yields were found between Dwarf Essex and Cascade varieties of rapeseed. 8 refs., 17 figs., 5 tabs.

  13. Depositional and diagenetic history of a Pennsylvanian algal-mound complex: Bug and Papoose Canyon fields, Paradox basin, Utah and Colorado

    SciTech Connect

    Roylance, M.H.

    1990-07-01

    During the Middle Pennsylvanian (Desmoinesian), the Paradox basin was an enclosed, evaporitic basin consisting of a deep trough with a shallow shelf rimming its south and west side. During Desert Creek deposition, at least two large phylloid algal-mound complexes flourished on or at the edge of the shelf. One complex is now delineated by Aneth field and the other is partly delineated by Bug and Papoose Canyon fields. In the Bug-Papoose Canyon algal-mound complex of southeastern Utah and southwestern Colorado, carbonate mud mounds grew by accumulation of platy algal fragments, by baffling and trapping of fine sediment by the algae, and by precipitation of botryoidal aragonite cement between fragments. Extensive diagenesis of the accumulations began with syndepositional precipitation of botryoidal cement, inferred to have been aragonite, on phylloid algal plates, creating a topographically prominent, rigid framework containing abundant pore space. Brecciation during compaction created more pores. Parts of voids were subsequently filled by internal sediment and by calcite and gypsum cements. Finally, the algal-mound accumulations were extensively dolomitized and their porosity increased by dissolution. The relationship of these algal mounds to the Desert Creek shelf edge suggests that delineation of the shelf edge holds the promise of further discoveries of algal mounds as it is traced to the west and east of Bug and Papoose Canyon fields. 17 figs., 1 tab.

  14. Fuel savings in the heavy trucking industry through cool storage

    SciTech Connect

    Carr, P.

    1991-09-15

    Overnight idling wastes considerable amounts of fuel, contributes to noise and air pollution and adds significantly to trucker's operating costs. Costs are increased because of both the fuel wasted and the additional maintenance required on the engine as a result of extended idling. In winter, idling not only allows a resting driver to keep warm but prevents cold weather battery, fuel gelling and engine starting problems. In the summer, however, the only reason for overnight idling is to keep the sleeper compartment habitable for the resting driver and diesel engine idling to accomplish this is a massive overkill. A novel, patented, cool storage system has been developed by the Instatherm Company. This system allows comfortable summer resting conditions for the driver without having to idle the engine or having to start or run any other auxiliary engine. The operating principle is very straightforward -- store cool'' from the truck air conditioning system, while the vehicle is driven on the highway and to use this stored cool'' to air condition the sleeper compartment while the driver rests. 17 figs.

  15. Effect of rapid solidification on stainless steel weld metal microstructures and its implications on the Schaeffler diagram

    SciTech Connect

    David, S.A.; Vitek, J.M.; Reed, R.W.; Hebble, T.L.

    1987-09-01

    An investigation was carried out to determine the effect of rapid solidification on the weld metal microstructure of austenitic stainless steels and its implication on the ferrite constitution diagram. A wide variety of stainless steels were laser welded at different welding speeds and laser power levels. Results indicate that both weld pool cooling rate and the postsolidification solid state cooling rates have a profound effect on the microstructures. For the steels investigated, the microstructures ranged from duplex austenite (..gamma..) + ferrite (delta) to fully austenitic or fully ferritic. These microstructures were found to be sensitive to both cooling rates and composition. The observed results are rationalized based on rapid solidification theory. This investigation indicates that solidification rates and postsolidification cooling rates have a profound effect on the observed microstructures, thus making it impossible to predict the microstructures of rapidly cooled weld metal from the conventional constitution diagrams. The influence of the observations made in this investigation on the Schaeffler diagram is demonstrated, and possible corrections to the constitution diagram incorporating the cooling rate effects are proposed. 23 refs., 17 figs., 4 tabs.

  16. A coupled heat and water flow apparatus

    SciTech Connect

    Mohamed, A.M.O.; Caporouscio, F.; Yong, R.N. ); Cheung, C.H. ); Kjartanson, B.H. )

    1993-03-01

    Safe and permanent disposal of radioactive waste requires isolation of a number of diverse chemical elements form the environment. The Canadian Nuclear Fuel Waste Management Program is assessing the concept of disposing of waste in a vault excavated at a depth of 500 to 1000 m below the ground surface in plutonic rock of the Canadian Shield. The temperatures and hydraulic potential in the buffer and back fill material were investigated. To study the performance of a compacted buffer material under thermal and isothermal conditions, a coupled heat and water flow apparatus is designed and presented. In the preliminary design, a one-dimensional flow of heat and water was not achieved. however, control of temperature gradient, existence of one-dimensional flow, and uniformity of temperature and volumetric water content distributions at any cross section within the specimen are achieved in the modified design. Experimental results have shown that the temperature stabilizes very rapidly after a period of approximately 0. 107 days. The moisture moves away from the hot end along the longitudinal direction of the specimen due to imposed thermal gradient. The time required for moisture to stabilize is in order of days. 17 refs., 17 figs., 3 tabs.

  17. Gas-phase thermal dissociation of uranium hexafluoride: Investigation by the technique of laser-powered homogeneous pyrolysis

    SciTech Connect

    Bostick, W.D.; McCulla, W.H.; Trowbridge, L.D.

    1987-04-01

    In the gas-phase, uranium hexafluoride decomposes thermally in a quasi-unimolecular reaction to yield uranium pentafluoride and atomic fluorine. We have investigated this reaction using the relatively new technique of laser-powered homogeneous pyrolysis, in which a megawatt infrared laser is used to generate short pulses of high gas temperatures under strictly homogeneous conditions. In our investigation, SiF/sub 4/ is used as the sensitizer to absorb energy from a pulsed CO/sub 2/ laser and to transfer this energy by collisions with the reactant gas. Ethyl chloride is used as an external standard ''thermometer'' gas to permit estimation of the unimolecular reaction rate constants by a relative rate approach. When UF/sub 6/ is the reactant, CF/sub 3/Cl is used as reagent to trap atomic fluorine reaction product, forming CF/sub 4/ as a stable indicator which is easily detected by infrared spectroscopy. Using these techniques, we estimate the UF/sub 6/ unimolecular reaction rate constant near the high-pressure limit. In the Appendix, we describe a computer program, written for the IBM PC, which predicts unimolecular rate constants based on the Rice-Ramsperger-Kassel theory. Parameterization of the theoretical model is discussed, and recommendations are made for ''appropriate'' input parameters for use in predicting the gas-phase unimolecular reaction rate for UF/sub 6/ as a function of temperature and gas composition and total pressure. 85 refs., 17 figs., 14 tabs.

  18. Halbach array DC motor/generator

    DOEpatents

    Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

    1998-01-06

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

  19. Thermochemical properties of gibbsite, bayerite, boehmite, diaspore, and the aluminate ion between 0 and 350/degree/C

    SciTech Connect

    Apps, J.A.; Neil, J.M.; Jun, C.H.

    1989-01-01

    A requirement for modelling the chemical behavior of groundwater in a nuclear waste repository is accurate thermodynamic data pertaining to the participating minerals and aqueous species. In particular, it is important that the thermodynamic properties of the aluminate ion be accurately determined, because most rock forming minerals in the earth's crust are aluminosilicates, and most groundwaters are neutral to slightly alkaline, where the aluminate ion is the predominant aluminum species in solution. Without a precise knowledge of the thermodynamic properties of the aluminate ion aluminosilicate mineral solubilities cannot be determined. The thermochemical properties of the aluminate ion have been determined from the solubilities of the aluminum hydroxides and oxyhydroxides in alkaline solutions between 20 and 350/degree/C. An internally consistent set of thermodynamic properties have been determined for gibbsite, boehmite, diaspore and corundum. The thermodynamic properties of bayerite have been provisionally estimated and a preliminary value for ..delta..G/sub f, 298//sup 0/ of nordstrandite has been determined. 205 refs., 17 figs., 25 tabs.

  20. Design and performance of the constructed wetland wastewater treatment system at Phillips High School, Bear Creek, Alabama

    SciTech Connect

    Not Available

    1990-05-01

    A constructed wetlands waste water treatment system has been constructed at Phillips High School, Bear Creek, Alabama, to polish the effluent from the school's extended aeration package treatment plant. The project is a demonstration of innovative technology under the Congressionally appropriated Bear Creek Floatway projects. Construction was completed in August 1988 at a cost of $36,266. Monitoring results for the period October 1988 through July 1989 reveal that the system has been very effective in polishing the effluent from the package treatment plant. The effectiveness is attributed primarily to maintenance of an overall oxidizing environment within the gravel substrate. Average monthly removals during the first year of operation exceeded 90 percent for BOD, TSS, organic nitrogen, total phosphorus, dissolved phosphorus, and fecal coliforms. Average removal percentages ranged in the 80s for ammonia and total nitrogen and in the 70s for nitrate + nitrite nitrogen and dissolved BOD. The prevalence of oxidizing conditions is probably the result of low carbonaceous demand, the low inlet hydraulic loading rate, and the combination of the shallow gravel depth and the excellent plant coverage and root depths during the first year of operation. 11 refs., 17 figs., 2 tabs.

  1. The role of <100> edge dislocations in nucleating radiation-induced colloid particles in sodium chloride

    SciTech Connect

    Teutonico, L.J.

    1982-09-01

    A theoretical program to investigate the role of dislocations in the nucleation of sodium colloids in irradiated rock salt has been outlined. As the first study in the investigation the interaction of radiation-produced defects with the <001> edge dislocation in rock salt, i.e., the edge dislocation in the principal slip system of NaCl, has been considered. The interaction potential between a symmetric defect and the <001> edge dislocation has been determined on the basis of anisotropic elasticity theory. The potential arises from the interaction between the long-range stress field of the dislocation and the displacements around the point defect. The corresponding flow lines, i.e., the lines along which the defects flow to the dislocation, have also been determined. In general, the flow lines are closed loops passing through the center of the dislocation. One of the novel features introduced by anisotropy is the possibility of open flow lines for certain elastic constant values. Along some of these open flow lines defects are attracted to the dislocation, whereas long others defects are repelled from the dislocation of common plane. 33 refs., 17 figs.

  2. Structural definition of synthetic fuels: H-coal distillates

    SciTech Connect

    Schmidt, C.E.; Perry, M.B.; White, C.M.; Gibbon, G.A.; Retcofsky, H.L.

    1986-01-01

    This work describes the progress made on a Pittsburgh Energy Technology Center research project titled ''Structural Definition of Synthetic Fuels.'' An H-Coal product consisting of a blend of ''light'' and ''heavy'' oils was distilled into 50/sup 0/F boiling cuts. Mid-boiling temperature, specific gravity, molecular weight by several techniques, refractive index, and viscosity were determined for each H-Coal distillate. Structural parameters for each 50/sup 0/F distillate cut were elucidated from nuclear magnetic resonance and low-voltage, high-resolution mass spectrometric analyses. Preparative liquid chromatography was used to obtain functionality enriched fractions of saturates, aromatics, acids, and bases from the H-Coal distillates. Several correlations have been found from these extensive data sets and are discussed and interpreted in terms of findings from previous investigations. The potential for developing mathematical models relating the aromaticity from nuclear magnetic resonance results and the structural parameter, Z, from mass spectrometry with the inspection properties of the H-Coal pseudocomponents is demonstrated. Average chemical structures for each distillate are proposed based on the analytical results. 25 refs., 17 figs., 13 tabs.

  3. HERB: A production system for programming with hierarchical expert rule bases: User's manual, HERB Version 1. 0

    SciTech Connect

    Hummel, K.E.

    1987-12-01

    Expert systems are artificial intelligence programs that solve problems requiring large amounts of heuristic knowledge, based on years of experience and tradition. Production systems are domain-independent tools that support the development of rule-based expert systems. This document describes a general purpose production system known as HERB. This system was developed to support the programming of expert systems using hierarchically structured rule bases. HERB encourages the partitioning of rules into multiple rule bases and supports the use of multiple conflict resolution strategies. Multiple rule bases can also be placed on a system stack and simultaneously searched during each interpreter cycle. Both backward and forward chaining rules are supported by HERB. The condition portion of each rule can contain both patterns, which are matched with facts in a data base, and LISP expressions, which are explicitly evaluated in the LISP environment. Properties of objects can also be stored in the HERB data base and referenced within the scope of each rule. This document serves both as an introduction to the principles of LISP-based production systems and as a user's manual for the HERB system. 6 refs., 17 figs.

  4. Sensitivity of a GCM climate simulation to differences in continental versus maritime cloud drop size

    SciTech Connect

    Kiehl, J.T.

    1994-11-20

    Extensive observations indicate a distinct difference between maritime and continental effective drop size, r{sub e}, for warm clouds. The latest version of the NCAR Community Climate Model (CCM2) is used to explore the sensitivity of differentiating between continental and maritime r{sub e} on the simulated climate. The results of this study indicate that the smaller drop size over continents leads to a reduction of surface-absorbed solar radiation from 20 to 60 W m{sup {minus}2}. This reduction in surface solar flux leads to a cooling of the continents by up to {minus}3.5 K. The reduction in surface solar flux and temperature also leads to a reduction in latent heat flux and precipitation over land. In the January simulation, there is a significant shift in tropical precipitation associated with the Australian monsoon. This shift leads to a response in the extra tropical geopotential height field over the western United States. All of these changes reduce biases in the current version of CCM2. 24 refs., 17 figs., 1 tab.

  5. Evaluation of Lower Umatilla River Channel Modifications Below Three Mile Dam, 1984 Annual Progress Report.

    SciTech Connect

    Nigro, Anthony A.; Ward, David L.

    1985-05-01

    This report summarizes results of the first year of a study initiated in September 1984 to evaluate the adequacy of channel modifications made in the lower Umatilla River to improve adult anadromous salmonid passage to Three Mile Dam (RKm 5.6), determine if fish passage or delay problems exist at Three Mile Dam and recommend site specific corrective measures if needed. Movements of steelhead (Salmo gairdneri) were monitored using mark and recapture and radio telemetry techniques. Thirty-four steelhead were marked with T-anchor tags and released in the lower river. Fifteen of those marked were also fitted with radio transmitters. Three radiotagged steelhead migrated through channel modifications to Three Mile Dam. Two of these fish migrated to the dam in less than 26 hours, but held just below the dam for 7 and 10 days before entering the ladders. The third steelhead delayed for 30 days and entered the west ladder within 24 hours of arrival at the dam. Two other radiotagged steelhead moved upstream through some of the channel modifications but did not migrate to the dam. Only one of 19 marked steelhead not fitted with transmitters was recovered at Three Mile Dam. 14 refs., 18 figs., 3 tabs.

  6. Description of the Northwest hazardous waste site data base and preliminary analysis of site characteristics

    SciTech Connect

    Woodruff, D.L.; Hartz, K.E.; Triplett, M.B.

    1988-08-01

    The Northwest Hazardous Waste RD and D Center (the Center) conducts research, development, and demonstration (RD and D) activities for hazardous and radioactive mixed-waste technologies applicable to remediating sites in the states of Idaho, Montana, Oregon, and Washington. To properly set priorities for these RD and D activities and to target development efforts it is necessary to understand the nature of the sites requiring remediation. A data base of hazardous waste site characteristics has been constructed to facilitate this analysis. The data base used data from EPA's Region X Comprehensive Environmental Response, Compensation, and Liability Information System (CERCLIS) and from Preliminary Assessment/Site Investigation (PA/SI) forms for sites in Montana. The Center's data base focuses on two sets of sites--those on the National Priorities List (NPL) and other sites that are denoted as ''active'' CERCLIS sites. Active CERCLIS sites are those sites that are undergoing active investigation and analysis. The data base contains information for each site covering site identification and location, type of industry associated with the site, waste categories present (e.g., heavy metals, pesticides, etc.), methods of disposal (e.g., tanks, drums, land, etc.), waste forms (e.g., liquid, solid, etc.), and hazard targets (e.g., surface water, groundwater, etc.). As part of this analysis, the Northwest region was divided into three geographic subregions to identify differences in disposal site characteristics within the Northwest. 2 refs., 18 figs., 5 tabs.

  7. Automated microscopy methods for measuring pyritic sulfur content of coal and determining degree of liberation of pyrite in coal: Final report

    SciTech Connect

    Chaparro, L.F.

    1987-07-25

    The objective of this project is to develop an automated procedure, to be implemented in an IBAS image analyzer, to determine size, shape and degree of liberation of pyrite particles in a coal matrix. This procedure is to work in real time conditions and with minimal intervention from the operator. Our approach is to create from the original microscopic image a three level image with the following components: epoxy, coal macerals and pyrite to simplify the calculations. Enhancing the original image by histogram scaling and median filtering, we segment it and form the three level image. After the boundaries of the pyrite particles are defined, we mask the surroundings of the particle to estimate the degree of liberation. The percentage of epoxy included in the mask is defined as the degree of liberation of the particle. Size and shape factor values are simultaneously calculated for each of the analyzed particles. These particles are classified according to their maximum diameter, shape factor and degree of liberation by the program. 6 refs., 18 figs.

  8. Diesel fuel detergent additive performance and assessment

    SciTech Connect

    Vincent, M.W.; Papachristos, M.J.; Williams, D.; Burton, J.

    1994-10-01

    Diesel fuel detergent additives are increasingly linked with high quality automotive diesel fuels. Both in Europe and in the USA, field problems associated with fuel injector coking or fouling have been experienced. In Europe indirect injection (IDI) light duty engines used in passenger cars were affected, while in the USA, a direct injection (DI) engine in heavy duty truck applications experienced field problems. In both cases, a fuel additive detergent performance test has evolved using an engine linked with the original field problem, although engine design modifications employed by the manufacturers have ensured improved operation in service. Increasing awareness of the potential for injector nozzle coking to cause deterioration in engine performance is coupled with a need to meet ever more stringent exhaust emissions legislation. These two requirements indicate that the use of detergency additives will continue to be associated with high quality diesel fuels. The paper examines detergency performance evaluated in a range of IDI and DI engines and correlates performance in the two most widely recognised test engines, namely the Peugeot 1.9 litre IDI, and Cummins L10 DI engines. 17 refs., 18 figs., 5 tabs.

  9. R D for the storage, transport, and handling of coal-based fuels

    SciTech Connect

    Not Available

    1990-01-01

    The product of several advanced physical coal cleaning processes is a dry, ultrafine coal (DUC), in the order of 10 microns mean mass diameter. Environmentally safe systems must be provided for the storage, transport, and handling of this fuel. The objective of the project is the development of total logistics systems for DUC, including experimental verification of key features. The systems to be developed will provide for safe, economic, and environmentally protective storage and delivery of DUC for residential, commercial, and industrial uses. Work this quarter entailed: obtaining all of the test coals including 10 lbs of Illinois No. 6 cleaned by the LICADO process. Installation of the test system for the Residential Storage Tank including piping and the components required to recycle the ultrafine coal. Completion of the design of the scale model test of the Industrial/Commercial Storage System. Piping and supports for the porous fluidization plates in the floor of the tanks have been completed. Preliminary results with the Illinois No. 6 coal cleaned by the Bechtel heptane/asphalt process indicate that this material is cohesive and difficult to fluidize. Studies of dune formation have been made with the Illinois No. 6 coal. These data provide information on the minimum velocity which will transport the particles. 11 refs., 18 figs.

  10. Spin-mapping of coal structures with ESE and ENDOR

    SciTech Connect

    Belford, R.L.; Clarkson, R.B.

    1989-09-01

    The broad goals of this project are to determine by nondestructive means -- magnetic resonance techniques -- aspects of chemical and physical structures of organic parts of native and treated coals. We also hope to use related methods to follow the course of certain coal cleaning processes with microscopic spatial resolution. Specific goals include: the nondestructive determination of atomic and molecular structure of sulfur-containing organic species in coal both in its natural state and at various stages during desulfurization; determination of interatomic distances, numbers, and orientations in individual macerals with differing sulfur content by pulsed EPR microscopy; development of nondestructive high-resolution microscopic images of internal structure in coal, including chemical information on the location and distribution of sulfur-containing compounds; determination of sulfur compound chemical structure from highly localized regions in a whole coal sample; by means of the techniques used to accomplish the above goals, to measure the effects of various coal cleaning methods on the molecular forms and spatial distribution of organic sulfur, and on internal structural characteristics like pore size and maceral density; following by these microscopic methods the rate and extent of solvent intrusion into the pores and matrix of whole coals and separated macerals. The work carried out this year mainly addressed goals 1, 2, 3, and 6. 24 refs., 18 figs.

  11. Salt Repository Project shaft design guide: Revision 0

    SciTech Connect

    Not Available

    1987-12-01

    The Salt Repository Project (SRP) Shaft Design Guide (SDG) and the accompanying SRP Input to Seismic Design define the basic approach for developing appropriate shaft designs for a high-level nuclear waste repository in salt at a proposed site in Deaf Smith County, Texas. The SDG is based on current mining industry standards and practices enhanced to meet the special needs of an underground nuclear waste repository. It provides a common approach for design of both the exploratory and repository shafts. The SDG defines shaft lining and material concepts and presents methods for calculating the loads and displacements that will be imposed on lining structures. It also presents the methodology and formulae for sizing lining components. The SDG directs the shaft designer to sources of geoscience and seismic design data for the Deaf Smith County, Texas repository site. In addition, the SDG describes methods for confirming shaft lining design by means of computer analysis, and it discusses performance monitoring needs that must be considered in the design. 113 refs., 18 figs., 14 tabs.

  12. Arctic ice shelves and ice islands: Origin, growth and disintegration, physical characteristics, structural-stratigraphic variability, and dynamics

    SciTech Connect

    Jeffries, M.O. )

    1992-08-01

    Ice shelves are thick, floating ice masses most often associated with Antarctica where they are seaward extensions of the grounded Antarctic ice sheet and sources of many icebergs. However, there are also ice shelves in the Arctic, primarily located along the north coast of Ellesmere Island in the Canadian High Arctic. The only ice shelves in North America and the most extensive in the north polar region, the Ellesmere ice shelves originate from glaciers and from sea ice and are the source of ice islands, the tabular icebergs of the Arctic Ocean. The present state of knowledge and understanding of these ice features is summarized in this paper. It includes historical background to the discovery and early study of ice shelves and ice islands, including the use of ice islands as floating laboratories for polar geophysical research. Growth mechanisms and age, the former extent and the twentieth century disintegration of the Ellesmere ice shelves, and the processes and mechanisms of ice island calving are summarized. Surface features, thickness, thermal regime, and the size, shape, and numbers of ice islands are discussed. The structural-stratigraphic variability of ice islands and ice shelves and the complex nature of their growth and development are described. Large-scale and small-scale dynamics of ice islands are described, and the results of modeling their drift and recurrence intervals are presented. The conclusion identifies some unanswered questions and future research opportunities and needs. 97 refs., 18 figs.

  13. Lightweight extendable and retractable pole

    DOEpatents

    Warren, J.L.; Brandt, J.E.

    1994-08-02

    A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole. 18 figs.

  14. Method and apparatus for powering an electrodeless lamp with reduced radio frequency interference

    DOEpatents

    Simpson, J.E.

    1999-06-08

    An electrodeless lamp waveguide structure includes tuned absorbers for spurious RF signals. A lamp waveguide with an integral frequency selective attenuation includes resonant absorbers positioned within the waveguide to absorb spurious out-of-band RF energy. The absorbers have a negligible effect on energy at the selected frequency used to excite plasma in the lamp. In a first embodiment, one or more thin slabs of lossy magnetic material are affixed to the sidewalls of the waveguide at approximately one quarter wavelength of the spurious signal from an end wall of the waveguide. The positioning of the lossy material optimizes absorption of power from the spurious signal. In a second embodiment, one or more thin slabs of lossy magnetic material are used in conjunction with band rejection waveguide filter elements. In a third embodiment, one or more microstrip filter elements are tuned to the frequency of the spurious signal and positioned within the waveguide to couple and absorb the spurious signal's energy. All three embodiments absorb negligible energy at the selected frequency and so do not significantly diminish the energy efficiency of the lamp. 18 figs.

  15. Health effects models for nuclear power plant accident consequence analysis: Low LET radiation

    SciTech Connect

    Evans, J.S. . School of Public Health)

    1990-01-01

    This report describes dose-response models intended to be used in estimating the radiological health effects of nuclear power plant accidents. Models of early and continuing effects, cancers and thyroid nodules, and genetic effects are provided. Weibull dose-response functions are recommended for evaluating the risks of early and continuing health effects. Three potentially lethal early effects -- the hematopoietic, pulmonary, and gastrointestinal syndromes -- are considered. In addition, models are included for assessing the risks of several nonlethal early and continuing effects -- including prodromal vomiting and diarrhea, hypothyroidism and radiation thyroiditis, skin burns, reproductive effects, and pregnancy losses. Linear and linear-quadratic models are recommended for estimating cancer risks. Parameters are given for analyzing the risks of seven types of cancer in adults -- leukemia, bone, lung, breast, gastrointestinal, thyroid, and other.'' The category, other'' cancers, is intended to reflect the combined risks of multiple myeloma, lymphoma, and cancers of the bladder, kidney, brain, ovary, uterus and cervix. Models of childhood cancers due to in utero exposure are also developed. For most cancers, both incidence and mortality are addressed. The models of cancer risk are derived largely from information summarized in BEIR III -- with some adjustment to reflect more recent studies. 64 refs., 18 figs., 46 tabs.

  16. Repeat sequence chromosome specific nucleic acid probes and methods of preparing and using

    DOEpatents

    Weier, H.U.G.; Gray, J.W.

    1995-06-27

    A primer directed DNA amplification method to isolate efficiently chromosome-specific repeated DNA wherein degenerate oligonucleotide primers are used is disclosed. The probes produced are a heterogeneous mixture that can be used with blocking DNA as a chromosome-specific staining reagent, and/or the elements of the mixture can be screened for high specificity, size and/or high degree of repetition among other parameters. The degenerate primers are sets of primers that vary in sequence but are substantially complementary to highly repeated nucleic acid sequences, preferably clustered within the template DNA, for example, pericentromeric alpha satellite repeat sequences. The template DNA is preferably chromosome-specific. Exemplary primers and probes are disclosed. The probes of this invention can be used to determine the number of chromosomes of a specific type in metaphase spreads, in germ line and/or somatic cell interphase nuclei, micronuclei and/or in tissue sections. Also provided is a method to select arbitrarily repeat sequence probes that can be screened for chromosome-specificity. 18 figs.

  17. X-ray laser related experiments and theory at Princeton

    SciTech Connect

    Suckewer, S.

    1989-04-01

    This paper describes a new system for the development of an x-ray laser in the wavelength region from 5 nm to 1 nm utilizing a Powerful Sub-Picosecond Laser (PP-Laser) of expected peak power up to 0.5 TW in a 300 fs pulse. Soft x-ray spectra generated by the interaction of the PP-Laser beam with different targets are presented and compared to the spectra generated by a much less intense laser beam (20--30 GW). A theoretical model for the interaction of atoms with such a strong laser EM field is also briefly discussed. The development of additional amplifiers for the recombining soft x-ray laser and the design of a cavity are presented from the point of view of applications for x-ray microscopy and microlithography. This overview concludes with the presentation of recent results on the quenching of spontaneous emission radiation and its possible effect on the absolute intensity calibration of soft x-ray spectrometers. 26 refs., 18 figs.

  18. User interface in ORACLE for the Worldwide Household Goods Information System for Transportation Modernization (WHIST-MOD)

    SciTech Connect

    James, T. ); Loftis, J. )

    1990-07-01

    The Directorate of Personal Property of the Military Traffic Management Command (MTMC) requested that Oak Ridge National laboratory (ORNL) design a prototype decision support system, the Worldwide Household Goods Information System for Transportation Modernization (WHIST-MOD). This decision support system will automate current tasks and provide analysis tools for evaluating the Personal Property Program, predicting impacts to the program, and planning modifications to the program to meet the evolving needs of military service members and the transportation industry. The system designed by ORNL consists of three application modules: system dictionary applications, data acquisition and administration applications, and user applications. The development of the user applications module is divided into two phases. Round 1 is the data selection front-end interface, and Round 2 is the output or back-end interface. This report describes the prototyped front-end interface for the user application module. It discusses user requirements and the prototype design. The information contained in this report is the product of in-depth interviews with MTMC staff, prototype meetings with the users, and the research and design work conducted at ORNL. 18 figs., 2 tabs.

  19. Sea otter abundance, distribution, and pup production in Prince William Sound following the Exxon Valdez oil spill

    SciTech Connect

    Johnson, C.B.; Garshelis, D.L.

    1995-12-31

    The authors investigated effects of the 1989 Exxon Valdez oil spill on the abundance, distribution, and pup production of sea otters (Enhydra lutris) in prince William Sound (PWS) by comparing counts made during 1990 and 1991 with counts made by researchers 5--12 years before the spill. The authors observed no evidence of avoidance or attraction to spill-affected shorelines 1--2 years after the spill. Despite a substantial loss of sea otters immediately following the spill, the authors counted fewer otters than prespill investigators at only one of three heavily oiled islands, and from 1990 to 1991 the counts at this one site increased to a level equivalent to the latest (1985) prespill count. The authors followed the methods of prespill investigators and found close agreement between the counts of otters and those of two other concurrent investigations using the same survey technique. This agreement among counts, and the involvement in counts made prespill, suggested that inter-observer variability could not explain the unexpected high counts at oiled sites. 52 refs., 18 figs., 5 tabs.

  20. High-performance, extrusion-cast explosives with low sensitivity: Interim report No. 2

    SciTech Connect

    Scribner, K.J.; von Holtz, E.; Simpson, R.L.

    1989-01-10

    Lawrence Livermore National Laboratory (LLNL) has developed a class of explosives having both high performance for modern precision munitions and greater safety for reduced vulnerability of launch platforms (ships, planes, ammunition storage sites) to enemy fire or accidents. Known as extrusion-cast explosives (ECXs), they have demonstrated performance levels equivalent to the most powerful now available, but test results indicate they are far less sensitive than the conventional high-energy explosives. Specifically, in a sympathetic-detonation test, ECX that was immediately adjacent to a deliberately-detonated donor charge did not detonate in two of three tests, whereas Comp B did detonate sympathetically in this test. Also, this ECX provided performance equivalent to that of the high-performance explosive LX-14, when tested in the TOW (tube-launched, optically-sighted, wire-guided) missile. This report describes the performance, vulnerability, and processing (at this stage of development) of this class of explosives. 9 refs., 18 figs., 11 tabs.

  1. Mitigation of bird collisions with transmission lines: Final report

    SciTech Connect

    Beaulaurier, D.L.

    1981-09-11

    In this study removal of overhead groundwires was evaluated as a technique for mitigating bird collisions with transmission lines. Groundwires were removed by BPA from a 500 kV double circuit line at Bybee Lake in Portland, Oregon. Earlier studies at these sites had documented small but measurable collision rates (i.e., No. collisions/No. flights) attributed primarily to collisions with groundwires. Observations of bird flights and searches for dead birds in the vicinity of the lines constituted the primary methods of data collection during pre- and post-removal studies. Field work was conducted from October 1980 through March 1981. A total of seven dead birds and eight feather spots were found after groundwire removal. Species found were green-winged teal, pintail, greater scaup, American wigeon, glaucous-winged gull, starling, red-winged blackbird and song sparrow. No collisions with transmission lines were observed. During pre-removal studies at these two sites, a total of 53 dead birds and 22 feather spots were found over two years of study. It was necessary to document flight intensity (No. flights/day) during pre- and post-removal studies, in order to determine if the number of dead birds found changed because of groundwire removal or simply because of changes in flight intensity. 41 refs., 18 figs., 22 tabs.

  2. Solid propellant flame structure

    SciTech Connect

    Parr, T.P.; Hanson-Parr, D.M.

    1996-07-01

    Planar Laser Induced Fluorescence (PLIF), UV/Vis Absorption, and thermocouple measurements were done for HNF, RDX, HMX, and XM39 deflagration with and without CO{sub 2} laser-support. RDX and especially HNF have very short self-deflagration flame length scales. HMX and XM39 have taller self-deflagration flames. XM39 has a marked dark zone with plateau temperature about 1,400 K. RDX`s dark zone, present under laser supported deflagration, collapses when the external laser flux is removed. PLIF was used to measure the 2D NH, OH, and CN species profiles for these materials and OH temperature profile for RDX and HNF under non-laser supported conditions. The best spatial resolution for the RDX PLIF was about 4 {micro}m. Sandwiches of HNF and various binders were studied with PLIF and while obvious diffusion flames were present at low pressure, they are weak and are not expected to be burn rate controlling. 34 refs., 18 figs.

  3. Modular hydropower demonstration

    SciTech Connect

    Not Available

    1988-09-01

    The modular approach has been developed for the construction of small hydro projects in order to reduce the costs and to shorten procurement and construction schedules that occur when designs and equipment selection more applicable to large projects are used. The modular approach aims to maximize the use of ''off-the-shelf'' and readily available components. A key feature is the replacement of the conventional purpose-designed hydroelectric turbine by a pump used in reverse as a turbine with fixed blades and vanes. Other features are the use of siphon penstocks, induction generators, prefabricated structures, and automated control equipment. The New York State Energy Research and Development Authority contracted with Acres International Corporation to study two small hydro projects designed and built using the modular approach, and compare each one with an equivalent conventional design. Equipment procurement and installation costs, general construction costs, and energy production were estimated. Economic analyses were prepared. Preliminary data on operation and maintenance was recorded. The methodology and results of the study are contained in this report. 18 figs., 20 tabs.

  4. Coal liquefaction process streams characterization and evaluation

    SciTech Connect

    Robbins, G.A.; Winshel, R.A.; Burke, F.P.

    1990-10-01

    Consol R D is conducting a three-year program to characterize process and product streams from direct coal liquefaction process development projects. The program objectives are two-fold: (1) to obtain and provide appropriate samples of coal liquids for the evaluation of analytical methodology, and (2) to support ongoing DOE-sponsored coal liquefaction process development efforts. The first objective will utilize analytical techniques which have not been fully demonstrated; the second objective involves more previously proven methods. This quarter, two feed coals and 39 process oils from Wilsonville Run 258 were analyzed to provide information on process performance. Run 258 was operated in the thermal/catalytic Close-Coupled Integrated Two-Stage Liquefaction (CC-ITSL) mode with ash recycle. The subbituminous feed coals were from the Spring Creek Mine (Anderson and Dietz seams) and from the Black Thunder Mine (Wyodak and Anderson seams). Shell 324 catalyst was used in the second stage. Various coal samples related to Wilsonville Run 259 were analyzed for chemical and petrographic composition. These results will be given in a future report, which covers all of Run 259. 18 figs., 24 tabs.

  5. Design guidelines and procedures for guided horizontal drilling

    SciTech Connect

    Kirby, M.J.; Kramer, S.R.; Pittard, G.T.; Mamoun, M.

    1996-08-01

    Jason Consultants International, Inc., under the sponsorship of the Gas Research Institute (GRI), has developed guidelines, procedures and software, which are described in this paper, for the installation of polyethylene gas pipe using guided horizontal drilling. Jason was aided in this development by two key subcontractors; Maurer Engineering who wrote the software and NICOR Technologies who reviewed the software and guidelines from a utility perspective. This program resulted in the development of commerically viable software for utilities, contractors, engineering firms, and others involved with the installation of pipes using guided horizontal drilling. The software is an interactive design tool that allows the user to enter ground elevation data, alignment information and pipe data. The software aides the engineer in designing a drill path and provides plan and profile views along with tabular data for pipe depth and surface profile. Finally, the software calculates installation loads and pipe stresses, compares these values against pipe manufacturer`s recommendations, and provides this information graphically and in tabular form. 5 refs., 18 figs., 2 tabs.

  6. Paleoclimatic controls on sedimentation, diagnesis, and reservior quality: Lessons from Miocene carbonates

    SciTech Connect

    Sun, S.Q. ); Esteban, M. )

    1994-04-01

    Miocene carbonates worldwide were deposited in a wide range of paleogeographic and tectonic settings and form important reservoirs in several regions. The reservoir quality of these carbonates appears to have been primarily controlled by the prevailing paleoclimate, which exerted a major control of both the depositional patterns and diagenetic pathways. Two end members are discussed here: (1) humid, oceanic tropical-subtropical settings, and (2) arid, land-locked temperate-subtropical settings. In humid, oceanic tropical-subtropical settings (e.g., Miocene of Southeast Asia), a warming trend paralleled by generally rising sea level allowed thick coral reefs and skeletal banks to develop, most of which are seismically resolvable. These carbonates typically represent several stages or cycles of development (largely third-order) separated by discontinuities in platform growth with episodic subaerial exposure. Development of economic reservoirs is mainly related to relative sea level falls and associated meteoric diagenesis. Trends and patterns of reservoir distribution can be predicted within a sequence stratigraphic framework. Basal transgressive carbonates are mostly tight because of their relatively fine-grained textures, intense compaction, and isolation from meteoric water influence. Best reservoir quality is commonly developed beneath subaerial unconformities in highstand buildups where effect of meteoric water leaching and karstification are most intense. 80 refs., 18 figs., 1 tab.

  7. Late paleozoic tectonic amalgamation of northwestern China. Sedimentary record of the northern Tarim, northwestern Turpan, and southern Junggar basins

    SciTech Connect

    Carroll, A.R.; Graham, S.A.; Hendrix, M.S.; Ying, D.; Zhou, D.

    1995-05-01

    This study focuses on areas adjacent to the Tian Shan (shan is Chinese for mountains) in Xinjiang Uygur Autonomous Region, northwestern China, and provides new field data on Carboniferous and Permian outcrop exposures of sedimentary rocks of the southern Junggar, northwestern Turpan, and northern Tarim basins that bear directly on the history of late Paleozoic tectonic amalgamation. We present here a multifaceted sedimentary basin analysis, including sedimentary facies, paleocurrent, and sandstone provenance analyses, and reconstructions of late Paleozoic basin subsidence. These data provide a unique record not only of the basins themselves, but also of the evolution of the adjacent orogenic belts. This study is based on fieldwork during the summers of 1987, 1988, 1991, and 1992 by workers from Stanford University, the Chinese Academy of Geological Sciences, and the Xinjiang Bureau of Geology and Mineral Resources. Although reconnaissance in nature, the data presented here provide a basis for evaluating alternative hypotheses for the evolution of northwestern China and provide a starting point for more comprehensive future studies. 72 refs., 18 figs., 1 tab.

  8. High resolution amorphous silicon radiation detectors

    DOEpatents

    Street, R.A.; Kaplan, S.N.; Perez-Mendez, V.

    1992-05-26

    A radiation detector employing amorphous Si:H cells in an array with each detector cell having at least three contiguous layers (n-type, intrinsic, p-type), positioned between two electrodes to which a bias voltage is applied. An energy conversion layer atop the silicon cells intercepts incident radiation and converts radiation energy to light energy of a wavelength to which the silicon cells are responsive. A read-out device, positioned proximate to each detector element in an array allows each such element to be interrogated independently to determine whether radiation has been detected in that cell. The energy conversion material may be a layer of luminescent material having a columnar structure. In one embodiment a column of luminescent material detects the passage therethrough of radiation to be detected and directs a light beam signal to an adjacent a-Si:H film so that detection may be confined to one or more such cells in the array. One or both electrodes may have a comb structure, and the teeth of each electrode comb may be interdigitated for capacitance reduction. The amorphous Si:H film may be replaced by an amorphous Si:Ge:H film in which up to 40 percent of the amorphous material is Ge. Two dimensional arrays may be used in X-ray imaging, CT scanning, crystallography, high energy physics beam tracking, nuclear medicine cameras and autoradiography. 18 figs.

  9. Nuclear research emulsion neutron spectrometry at the Little-Boy replica

    SciTech Connect

    Gold, R.; Roberts, J.H.; Preston, C.C.

    1985-10-01

    Nuclear research emulsions (NRE) have been used to characterize the neutron spectrum emitted by the Little-Boy replica. NRE were irradiated at the Little-Boy surface as well as approximately 2 m from the center of the Little-Boy replica using polar angles of 0/sup 0/, 30/sup 0/, 60/sup 0/ and 90/sup 0/. For the NRE exposed at 2 m, neutron background was determined using shadow shields of borated polyethylene. Emulsion scanning to date has concentrated exclusively on the 2-m, 0/sup 0/ and 2-m, 90/sup 0/ locations. Approximately 5000 proton-recoil tracks have been measured in NRE irradiated at each of these locations. Neutron spectra obtained from these NRE proton-recoil spectra are compared with both liquid scintillator neutron spectrometry and Monte Carlo calculations. NRE and liquid scintillator neutron spectra generally agree within experimental uncertainties at the 2-m, 90/sup 0/ location. However, at the 2-m, 0/sup 0/ location, the neutron spectra derived from these two independent experimental methods differ significantly. NRE spectra and Monte Carlo calculations exhibit general agreement with regard to both intensity as well as energy dependence. Better agreement is attained between theory and experiment at the 2-m, 90/sup 0/ location, where the neutron intensity is considerably higher. 14 refs., 18 figs., 11 tabs.

  10. A new species of the genus Hermanella Needham & Murphy (Ephemeroptera: Leptophlebiidae) from Northeastern Brazil.

    PubMed

    Almeida, Everlin; Costa, Sabrina; Mariano, Rodolfo

    2016-01-01

    Hermanella angeli sp. nov. (Holotype male deposited in MZUSP: Itacaré municipality, Cachoeira Bom Sossego, 14°20'05.2"S, 39°01'27.4"W, 31.VII.2012, Mariano, R, Almeida, E & Costa, S. leg.) is described based on imagos and nymphs from the State of Bahia, Brazil. The new species can be distinguished by the following combination of characteristics, in male imagos: (1) costal and subcostal area of forewing brown (Fig. 5b); (2) thorax and abdominal terga predominantly brown (Fig. 2-3); (3) penes divided in apical 1/8 (Fig. 8); (4) penis lobe with ventral, long, curved spine (Fig. 7); (5) prosternum narrow (Fig. 1). In nymphs: (1) tarsal claws with 2-3 accessory denticles (Fig. 19); (2) mandible without setae near basal articulation (Fig. 13a); (3) prostheca of left mandible with spines on inner margin (Fig. 13b); (4) plate-like gills terminated in a finger-like process (Fig. 11). PMID:27395966

  11. Nucleic acid detection methods

    DOEpatents

    Smith, C.L.; Yaar, R.; Szafranski, P.; Cantor, C.R.

    1998-05-19

    The invention relates to methods for rapidly determining the sequence and/or length a target sequence. The target sequence may be a series of known or unknown repeat sequences which are hybridized to an array of probes. The hybridized array is digested with a single-strand nuclease and free 3{prime}-hydroxyl groups extended with a nucleic acid polymerase. Nuclease cleaved heteroduplexes can be easily distinguish from nuclease uncleaved heteroduplexes by differential labeling. Probes and target can be differentially labeled with detectable labels. Matched target can be detected by cleaving resulting loops from the hybridized target and creating free 3-hydroxyl groups. These groups are recognized and extended by polymerases added into the reaction system which also adds or releases one label into solution. Analysis of the resulting products using either solid phase or solution. These methods can be used to detect characteristic nucleic acid sequences, to determine target sequence and to screen for genetic defects and disorders. Assays can be conducted on solid surfaces allowing for multiple reactions to be conducted in parallel and, if desired, automated. 18 figs.

  12. Global climate change and the mitigation challenge

    SciTech Connect

    Frank Princiotta

    2009-10-15

    Anthropogenic emissions of greenhouse gases, especially carbon dioxide (CO{sub 2}), have led to increasing atmospheric concentrations, very likely the primary cause of the 0.8{sup o}C warming the Earth has experienced since the Industrial Revolution. With industrial activity and population expected to increase for the rest of the century, large increases in greenhouse gas emissions are projected, with substantial global additional warming predicted. This paper examines forces driving CO{sub 2} emissions, a concise sector-by-sector summary of mitigation options, and research and development (R&D) priorities. To constrain warming to below approximately 2.5{sup o}C in 2100, the recent annual 3% CO{sub 2} emission growth rate needs to transform rapidly to an annual decrease rate of from 1 to 3% for decades. Furthermore, the current generation of energy generation and end-use technologies are capable of achieving less than half of the emission reduction needed for such a major mitigation program. New technologies will have to be developed and deployed at a rapid rate, especially for the key power generation and transportation sectors. Current energy technology research, development, demonstration, and deployment (RDD&D) programs fall far short of what is required. 20 refs., 18 figs., 4 tabs.

  13. Sequence stratigraphy of the lower Ordovician Prairie du Chien Group on the Wisconsin arch and in the Michigan basin

    SciTech Connect

    Smith, G.L. ); Byers, C.W.; Dott, R.H. Jr. )

    1993-01-01

    Mixed carbonate-siliciclastic sediments of the Prairie du Chien Group were largely deposited in shallow tropical seas. Sedimentologic indices of shallow-water deposition and a moderately diverse Early Ordovician macrofauna and mid-continent conodont fauna indicate that shallow-marine conditions prevailed across the Wisconsin arch and Michigan basin throughout most of Prairie du Chien deposition. Although the Wisconsin arch and Michigan basin were weakly active structural features, tectonism does not appear to have appreciably influenced water depths. The Michigan basin was not a bathymetric basin during the Early Ordovician as it became during the Silurian. The Prairie du Chien Group contains two major depositional sequences, the Oneota and Shakopee formations, both of which are bounded by type 1 sequence boundaries. On the Wisconsin arch, type 1 sequence boundaries are associated with karsting and silicification of underlying carbonates, indicating unconformity development during prolonged subaerial exposure. In the central Michigan basin, formation contacts are sharp and appear disconformable. The contacts between the two lithostratigraphic members comprising each formation in outcrop do not appear to be subaerial unconformities and are interpreted as type 2 sequence boundaries. 87 refs., 18 figs.

  14. Natural Phenomena Hazards Modeling Project: Flood hazard models for Department of Energy sites

    SciTech Connect

    Savy, J.B.; Murray, R.C.

    1988-05-01

    For eight sites, the evaluation of flood hazards was considered in two steps. First, a screening assessment was performed to determine whether flood hazards may impact DOE operations. The screening analysis consisted of a preliminary flood hazard assessment that provides an initial estimate of the site design basis. The second step involves a review of the vulnerability of on-site facilities by the site manager; based on the results of the preliminary flood hazard assessment and a review of site operations, the manager can decide whether flood hazards should be considered a part of the design basis. The scope of the preliminary flood hazard analysis was restricted to evaluating the flood hazards that may exist in proximity to a site. The analysis does not involve an assessment of the potential of encroachment of flooding at specific on-site locations. Furthermore, the screening analysis does not consider localized flooding at a site due to precipitation (i.e., local run-off, storm sewer capacity, roof drainage). These issues were reserved for consideration by the DOE site manager. 9 refs., 18 figs.

  15. Runoff and sediment yield model for predicting nuclide transport in watersheds using BIOTRAN

    SciTech Connect

    Gallegos, A.F.; Wenzel, W.J.

    1990-09-01

    The environmental risk simulation model BIOTRAN was interfaced with a series of new subroutines (RUNOFF, GEOFLX, EROSON, and AQUIFER) to predict the movement of nuclides, elements, and pertinent chemical compounds in association with sediments through lateral and channel flow of runoff water. In addition, the movement of water into and out of segmented portions of runoff channels was modeled to simulate the dynamics of moisture flow through specified aquifers within the watershed. The BIOTRAN soil water flux subroutine, WATFLX, was modified to interface the relationships found in the SPUR model for runoff and sediment transport into channels with the particle sorting relationships to predict radionuclide enrichment and movement in watersheds. The new subroutines were applied specifically to Mortandad Canyon within Los Alamos National Laboratory by simultaneous simulation of eight surface vegetational subdivisions and associated channel and aquifer segments of this watershed. This report focuses on descriptions of the construction and rationale for the new subroutines and on discussing both input characteristics and output relationships to known runoff events from Mortandad Canyon. Limitations of the simplified input on model behavior are also discussed. Uranium-238 was selected as the nuclide for demonstration of the model because it could be assumed to be homogeneously distributed over the watershed surface. 22 refs., 18 figs., 9 tabs.

  16. The Beam Break-Up Numerical Simulator

    SciTech Connect

    Travish, G.A.

    1989-11-01

    Beam Break-Up (BBU) is a severe constraint in accelerator design, limiting beam current and quality. The control of BBU has become the focus of much research in the design of the next generation collider, recirculating and linear induction accelerators and advanced accelerators. Determining the effect on BBU of modifications to cavities, the focusing elements or the beam is frequently beyond the ability of current analytic models. A computer code was written to address this problem. The Beam Break-Up Numerical Simulator (BBUNS) was designed to numerically solve for beam break-up (BBU) due to an arbitrary transverse wakefield. BBUNS was developed to be as user friendly as possible on the Cray computer series. The user is able to control all aspects of input and output by using a single command file. In addition, the wakefield is specified by the user and read in as a table. The program can model energy variations along and within the beam, focusing magnetic field profiles can be specified, and the graphical output can be tailored. In this note we discuss BBUNS, its structure and application. Included are detailed instructions, examples and a sample session of BBUNS. This program is available for distribution. 50 refs., 18 figs., 5 tabs.

  17. Filtering apparatus

    DOEpatents

    Haldipur, G.B.; Dilmore, W.J.

    1992-09-01

    A vertical vessel is described having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas. 18 figs.

  18. Benchmark study of the I-DYNEV evacuation time estimate computer code

    SciTech Connect

    Urbanik, T. II; Moeller, M.P.; Barnes, K.

    1988-06-01

    This report compares observed vehicle movement on a highway network during periods of peak computer traffic with a simulation of the traffic flow made with the I-DYNEV computer model. The purpose of the comparison is to detemine if the model can accurately simulate the patterns of vehicular movement and delay during congested commuter traffic. The results indicate that the I-DYNEV model adequately simulates the pattens of vehicular movement and delay associated with an evacuation, provided that the model's capacity reduction factor is an input parameter. The current I-DYNEV model automatically reduces capacity by 15% of input capacity to account for congestion-induced losses in capacity reduction due to congestion, the model underestimated capacity during congestion. Therefore, the use of a capacity reduction factor should be a decision made by the analysts, not the model. When I-DYNEV was used with a capacity reduction factor appropriate to the data set used (i.e., no reduction in capacity), I-DYNEV produced reasonable results. 3 refs., 18 figs., 3 tabs.

  19. Evaluation of charged-particle reactions for fusion applications

    SciTech Connect

    White, R.M.; Resler, D.A.; Warshaw, S.I.

    1991-01-01

    New evaluations of the total reaction cross sections for {sup 2}H(d,n){sup 3}He, {sup 2}H(d,p){sup 3}H, {sup 3}H(t,2n){sup 4}He,{sup 3}H(d,n){sup 4}He, and {sup 3}He(d,p){sup 4}He have been completed. These evaluations are based on all known published data from 1946 to 1990 and include over 1150 measured data points from 67 references. The purpose of this work is to provide a consistent and well-documented set of cross sections for use in calculations relating to fusion energy research. A new thermonuclear data file, TDF, and a library of FORTRAN subprograms to read the file have been developed. Calculated from the new evaluations, the TDF file contains information on the Maxwellian-averaged reaction rates as a function of reaction and plasma temperature and the Maxwellian-averaged average energy of the interacting particles and reaction products. Routines are included that provide thermally-broadened spectral information for the secondary reaction products. 67 refs., 18 figs.

  20. Performance testing of radiobioassay laboratories: In vivo measurements, Final Report

    SciTech Connect

    MacLellan, J.A.; Traub, R.J.; Olsen, P.C.

    1990-04-01

    A study of two rounds of in vivo laboratory performance testing was undertaken by Pacific Northwest Laboratory (PNL) to determine the appropriateness of the in vivo performance criteria of draft American National Standards Institute (ANSI) standard ANSI N13.3, Performance Criteria for Bioassay.'' The draft standard provides guidance to in vivo counting facilities regarding the sensitivity, precision, and accuracy of measurements for certain categories of commonly assayed radionuclides and critical regions of the body. This report concludes the testing program by presenting the results of the Round Two testing. Testing involved two types of measurements: chest counting for radionuclide detection in the lung, and whole body counting for detection of uniformly distributed material. Each type of measurement was further divided into radionuclide categories as defined in the draft standard. The appropriateness of the draft standard criteria by measuring a laboratory's ability to attain them were judged by the results of both round One and Round Two testing. The testing determined that performance criteria are set at attainable levels, and the majority of in vivo monitoring facilities passed the criteria when complete results were submitted. 18 refs., 18 figs., 15 tabs.

  1. Calorimetric system and method

    DOEpatents

    Gschneidner, K.A. Jr.; Pecharsky, V.K.; Moorman, J.O.

    1998-09-15

    Apparatus is described for measuring heat capacity of a sample where a series of measurements are taken in succession comprises a sample holder in which a sample to be measured is disposed, a temperature sensor and sample heater for providing a heat pulse thermally connected to the sample, and an adiabatic heat shield in which the sample holder is positioned and including an electrical heater. An electrical power supply device provides an electrical power output to the sample heater to generate a heat pulse. The electrical power from a power source to the heat shield heater is adjusted by a control device, if necessary, from one measurement to the next in response to a sample temperature-versus-time change determined before and after a previous heat pulse to provide a subsequent sample temperature-versus-time change that is substantially linear before and after the subsequent heat pulse. A temperature sensor is used and operable over a range of temperatures ranging from approximately 3K to 350K depending upon the refrigerant used. The sample optionally can be subjected to dc magnetic fields such as from 0 to 12 Tesla (0 to 120 kOe). 18 figs.

  2. Recognition and source correlation of migrated hydrocarbons in Upper Jurassic Hareelv Formation, Jameson Land, east Greenland

    SciTech Connect

    Requejo, A.G.; Hollywood, J.; Halpern, H.I. )

    1989-09-01

    Organic geochemical analysis of an interbedded shales and sandstone sequence from the Upper Jurassic Hareelv Formation, Jameson Land, East Greenland, has revealed oil shows in the sandstones, consistent with petroleum generation and migration. A comparison of the molecular characteristics of extractable material from the sandstones with those of kerogen and bitumen from the shales indicates that the most likely origin of these shows is generation within the shales with expulsion and short-range migration into the sandstones. This conclusion is based on comparisons of biological marker distributions, stable carbon isotopic compositions of extractable material and kerogen, and pyrolysate compositions of kerogen and asphaltenes. Oil from a seep in the Savoia Halvo region south of Jameson Land can be correlated to the Jurassic sandstone oil shows based on similar isotopic compositions and asphaltene pyrolysate distributions. Impregnation of both sandstones and shales throughout the sequence by products generated at higher maturities is considered unlikely, but cannot be ruled out by the existing data. 18 figs., 6 tabs.

  3. Influence of orographic and canopy conditions on friction velocities observed during frontal events using Doppler sodar observations

    SciTech Connect

    Kotroni, V.; Amory-Mazaudier, C. )

    1993-03-01

    Sodar friction velocities, obtained during frontal events traversing areas characterized by different orographic and canopy conditions (flat, bare ground, small hills and valleys with agricultural crops and trees, agricultural crops and forest on a flat ground, bare ground on the side of a mountain), are compared in order to identify the influence of topography on this parameter. For some case studies, sounding and sodar data are combined in order to provide a relation between the friction velocity and the low-level jet presence. For the cases analyzed in this paper, the following results are obtained: the frontal passage is associated with a decrease of the horizontal wind speed (about 50% in magnitude) in the surface layer, and an increase of the friction velocity before the frontal passage followed by a decrease just at the time of the frontal passage or with a little delay. Friction velocity is more intense in the cold side of the low-level jet and its maximum represents 2% of the low-level jet maximum magnitude. As it concerns the influence of the terrain conditions on friction velocity, mountain effects yield to more intense friction-velocity values and to a superposition of an oscillating behavior on the time variation of friction velocity, while forest effects induce a shift of the frontal signature on the time variation of friction velocity at higher height levels. 25 refs., 18 figs., 3 tabs.

  4. Reference concepts for a space-based hydrogen-oxygen combustion, turboalternator, burst power system

    SciTech Connect

    Edenburn, M.W.

    1990-07-01

    This report describes reference concepts for a hydrogen-oxygen combustion, turboalternator power system that supplies power during battle engagement to a space-based, ballistic missile defense platform. All of the concepts are open''; that is, they exhaust hydrogen or a mixture of hydrogen and water vapor into space. We considered the situation where hydrogen is presumed to be free to the power system because it is also needed to cool the platform's weapon and the situation where hydrogen is not free and its mass must be added to that of the power system. We also considered the situation where water vapor is an acceptable exhaust and the situation where it is not. The combination of these two sets of situations required four different power generation systems, and this report describes each, suggests parameter values, and estimates masses for each of the four. These reference concepts are expected to serve as a baseline'' to which other types of power systems can be compared, and they are expected to help guide technology development efforts in that they suggest parameter value ranges that will lead to optimum system designs. 7 refs., 18 figs., 5 tabs.

  5. Modelling the rheological behavior of high solids CWM systems using a new rheological equation

    SciTech Connect

    Hafaiedh, A.; Dinger, D.R.; Funk, J.E.

    1986-05-01

    The understanding of the rheology of concentrated suspensions is an important part of the control and preparation of ceramic slips and pastes and coal water slurries. Many studies have been conducted on concentrated suspensions; many attempts have been made to formulate equations which describe their behavior; and many attempts have been made to use these equations to predict the behavior of slurries and slips. This paper describes a modification to one of the more commonly used rheological equations, the Bingham equation (E.C. Bingham, ''An Investigation of the Laws of Plastic Flow'', Bulletin of the Bureau of Standards'', Volume 13, pp. 309-353 (1916-1917)), and the initial attempts to use it to understand and model the rheological behavior of high solids CWM. The paper will include the description of the new equation, its derivation, and examples of the various forms of the resulting rheograms. Then in the second part of the paper, the equation will be used to analyze the behavior of some typical CWM systems made from Cedar Grove and Moss seam coals. 8 refs., 18 figs.

  6. Characteristics of spent fuel, high-level waste, and other radioactive wastes which may require long-term isolation

    SciTech Connect

    1987-12-01

    The purpose of this report, and the information contained in the associated computerized data bases, is to establish the DOE/OCRWM reference characteristics of the radioactive waste materials that may be accepted by DOE for emplacement in the mined geologic disposal system. This report provides relevant technical data for use by DOE and its supporting contractors and is not intended to be a policy document. This document is backed up by five PC-compatible data bases, written in a user-oriented, menu-driven format, which were developed for this purpose. The data bases are the LWR Assemblies Data Base; the LWR Radiological Data Base; the LWR Quantities Data Base; the LWR NFA Hardware Data Base; and the High-Level Waste Data Base. The above data bases may be ordered using the included form. An introductory information diskette can be found inside the back cover of this report. It provides a brief introduction to each of these five PC data bases. 116 refs., 18 figs., 67 tabs.

  7. Core structure heat-up and material relocation in a BWR short-term station blackout accident

    SciTech Connect

    Schmidt, R.C.; Dosanjh, S.S.

    1990-01-01

    This paper presents an analytical and numerical analysis which evaluates the core-structure heat-up and subsequent relocation of molten core materials during a NWR short-term station blackout accident with ADS. A simplified one-dimensional approach coupled with bounding arguments is first presented to establish an estimate of the temperature differences within a BWR assembly at the point when structural material first begins to melt. This analysis leads to the conclusions that the control blade will be the first structure to melt and that at this point in time, overall temperature differences across the canister-blade region will not be more than 200 K. Next, a three-dimensional heat-transfer model of the canister-blade region within the core is presented that uses a diffusion approximation for the radiation heat transfer. This is compared to the one-dimensional analysis to establish its compatibility. Finally, the extension of the three-dimensional model to include melt relocation using a porous media type approximation is described. The results of this analysis suggest that under these conditions significant amounts of material will relocate to the core plate region and refreeze, potentially forming a significant blockage. The results also indicate that a large amount of lateral spreading of the melted blade and canister material into the fuel rod regions will occur during the melt progression process. 22 refs., 18 figs., 1 tab.

  8. The Idaho National Engineering Laboratory Site environmental report for calendar Year 1990

    SciTech Connect

    Hoff, D.L.; Mitchell, R.G.; Moore, R.; Shaw, R.M.

    1991-06-01

    The results of the various monitoring programs for 1990 indicate that most radioactivity from the Idaho National Engineering Laboratory (INEL) operations could not be distinguished from worldwide fallout and natural radioactivity in the region surrounding the INEL Site. Although some radioactive materials were discharged during Site operations, concentrations and doses to the surrounding population were of no health consequence and were far less than State of Idaho and Federal health protection guidelines. The first section of the report summarizes Calendar Year 1990 and January 1 through April 1, 1991, INEL activities related to compliance with environmental regulations and laws. The balance of the report describes the surveillance program, the collection of foodstuffs at the INEL boundary and distant offsite locations, and the collection of air and water samples at onsite locations and offsite boundary and distant locations. The report also compares and evaluates the sample results and discusses implications, if any. Nonradioactive and radioactive effluent monitoring at the Site, and the US Geological Survey (USGS) ground-water monitoring program are also summarized. 33 refs., 18 figs., 29 tabs.

  9. Environmental radiological studies in 1989 near the Rancho Seco Nuclear Power Generating Station

    SciTech Connect

    Robison, W.L.; Wong, Kai M.; Jones, H.E.

    1990-11-01

    In December 1988, the Sacramento Municipal Utilities District (SMUD) asked the Lawrence Livermore National Laboratory's (LLNL) Environmental Sciences Division (ENV) to collect sediment, water,and fish samples downstream from the Rancho Seco Nuclear Power Generating Station for analysis of radionuclides to compare with results from earlier surveys in 1984 through 1987 (1--8). ENV was, however, asked to reduce the total number of sample collections to a minimum in this study because of financial constraints. The proposal ENV submitted for the 1989 Environmental Radiological Studies downstream of the Rancho Seco Nuclear Power Generating Station reflected this reduction, but we believe, nevertheless, the 1989 efforts do allow us to make some meaningful comparisons with the previous studies. Cesium-137 is the most significant radionuclide still observed downstream from the Rancho Seco Nuclear Power Plant. Only occasionally is {sup 134}Cs or {sup 60}CO observed. In 1989, the concentration of {sup 137}Cs in the water and fish decreased with distance from the plant to the same level that is was in 1987, and was lower than it had been from 1984 through 1986. The concentration ratio (CR) for {sup 137}Cs in fish is between 1000 and 1500, which is below the NRC default value of 2000. Physical mixing in the creek environment has moved the {sup 137}Cs deeper into the sediment column, thereby reducing the concentration in the top 12 cm relative to that in previous years. 8 refs., 18 figs., 9 tabs.

  10. Study on collection efficiency of fission products by spray: Experimental device and modelling

    SciTech Connect

    Ducret, D.; Roblot, D.; Vendel, J.; Billarand, Y.

    1997-08-01

    Consequences of an hypothetical overheating reactor accident in nuclear power plants can be limited by spraying cold water drops into containment building. The spray reduces the pressure and the temperature levels by condensation of steam and leads to the washout of fission products (aerosols and gaseous iodine). The present study includes a large program devoted to the evaluation of realistic washout rates. An experimental device (named CARAIDAS) was designed and built in order to determine the collection efficiency of aerosols and iodine absorption by drops with representative conditions of post-accident atmosphere. This experimental device is presented in the paper and more particularly: (1) the experimental enclosure in which representative thermodynamic conditions can be achieved, (2) the monosized drops generator, the drops diameter measurement and the drops collector, (3) the cesium iodide aerosols generator and the aerosols measurements. Modelling of steam condensation on drops aerosols collection and iodine absorption are described. First experimental and code results on drops and aerosols behaviour are compared. 8 refs., 18 figs.

  11. Borehole magnetostratigraphy, absolute age dating, and correlation of sedimentary rocks, with examples from the Paris Basin, France

    SciTech Connect

    Bouisset, P.M. ); Augustin, A.M. )

    1993-04-01

    Total and CEA have conceived and developed two new logging tools which allow continuous, precise, and accurate in-situ magnetic measurements within weakly magnetized sedimentary rocks encountered in uncased industry drilled wells. The combination of these magnetic measurements permits for the first time continuous determination of natural remanent magnetization (NRM) polarities occurring in the logged section. The resulting well magnetostratigraphic sequence (WMS) which may be recognized from well to well (magnetostratigraphic correlations), may also be correlative to a geomagnetic polarity time scale (GPTS) of reference magnetostratigraphic scale (RMS), given adequate dating tie points and lack of noticeable remagnetizations. Application of this method to the Upper Jurrasic formation in four wells of the Paris basin has yielded promising results for both stratigraphic and near absolute age correlations as well as determination of facies diachronisms. The comparison of results obtained from magnetic measurements and from sequence stratigraphy analysis shows that third-order sequence boundaries may be correlative to geomagnetic reversals, but may also be diachronous in wells 80 km or less apart. The potential of borehole magnetic measurements as presented in this paper is still under investigation. However, these encouraging initial results show that this new investigating and dating method could be of great help in the analysis of subsurface stratigraphy by extending the concepts of magnetostratigraphy from the outcrops and laboratory directly into borehole logging. 81 refs., 18 figs.

  12. Fiber optics spectrochemical emission sensors

    DOEpatents

    Griffin, J.W.; Olsen, K.B.

    1992-02-04

    A method is described of in situ monitoring of a body of a fluid stored in a tank or groundwater or vadose zone gases in a well for the presence of selected chemical species. The method uses a probe insertable into the well or tank via a cable and having an electrical apparatus for exciting selected chemical species in the body of fluid. The probe can have a pair of electrodes for initiating a spark or a plasma cell for maintaining a plasma to excite the selected chemical species. The probe also has an optical apparatus for receiving optical emissions emitted by the excited species and optically transmitting the emissions via the cable to an analysis location outside the well. The analysis includes detecting a selected wavelength in the emissions indicative of the presence of the selected chemical species. A plurality of probes can be suspended at an end of a respective cable, with the transmitting and analyzing steps for each probe being synchronized sequentially for one set of support equipment and instrumentation to monitor at multiple test points. The optical apparatus is arranged about the light guide axis so that the selected chemical species are excited in the fluid in alignment with the light guide axis. Optical emissions are received from the excited chemical species along such axis. 18 figs.

  13. Computation and control with neural nets

    SciTech Connect

    Corneliusen, A.; Terdal, P.; Knight, T.; Spencer, J.

    1989-10-04

    As energies have increased exponentially with time so have the size and complexity of accelerators and control systems. NN may offer the kinds of improvements in computation and control that are needed to maintain acceptable functionality. For control their associative characteristics could provide signal conversion or data translation. Because they can do any computation such as least squares, they can close feedback loops autonomously to provide intelligent control at the point of action rather than at a central location that requires transfers, conversions, hand-shaking and other costly repetitions like input protection. Both computation and control can be integrated on a single chip, printed circuit or an optical equivalent that is also inherently faster through full parallel operation. For such reasons one expects lower costs and better results. Such systems could be optimized by integrating sensor and signal processing functions. Distributed nets of such hardware could communicate and provide global monitoring and multiprocessing in various ways e.g. via token, slotted or parallel rings (or Steiner trees) for compatibility with existing systems. Problems and advantages of this approach such as an optimal, real-time Turing machine are discussed. Simple examples are simulated and hardware implemented using discrete elements that demonstrate some basic characteristics of learning and parallelism. Future microprocessors' are predicted and requested on this basis. 19 refs., 18 figs.

  14. Safety assessment: Pinellas Plant Child Development Center/Partnership School

    SciTech Connect

    Not Available

    1990-06-21

    This document describes the Child Development Center/Partnership School and its unique relationship to the Pinellas Plant. The school and its operation are described in detail, along with the administrative and engineering controls in place to ensure the safety of the facility. Special emphasis is placed on the analyses of potential risks to school operations and personnel which may be posed by their close proximity to the plant. A recent Safety Systems Management Assay (SSMA) was used as a guide in describing both routine operations and potential credible accident scenarios at the Pinellas Plant site. The Safety Assessment concluded that, although potential accidents at the Pinellas Plant could result in injury to personnel on the school site, the low probability of these incidents would make operation of the school an acceptable risk. The risks associated with routine operations at the plant are similar to those encountered at a large-scale electronics manufacturing plant. Numerous safeguards are in place to limit the effects of any credible accident on the Pinellas Plant and school site. 32 refs., 18 figs., 33 tabs.

  15. Powered air-purifying respirator study: Final report

    SciTech Connect

    da Roza, R.A.; Cadena-Fix, C.A.; Kramer, J.E.

    1986-07-01

    Three brands of powered air-purifying respirators were subjected to a simulated-work-place study. They were worn by six human subjects while working at 80% of their cardiac reserve on a treadmill. The air flow into the respirator was controlled to match that of a respirator with a newly charged battery and with various stages of battery discharge and filter plugging. The simulation took place in a large quantitative fit test chamber containing PEG 400 aerosol. The penetration of aerosol into the breathing zone of the respirator, the pressure in it, and the air flow were monitored while the subject was warming up as well as during the 80% tests. The exercises recommended in ANSI Z88.2 for helmets were also used after the 80% tests were completed. The subjects were tested clean shaven, with three days' growth of stubble, and with a two-month beard growth. A striking result was that the aerosol penetration into the two-helmet respirators increased dramatically as the subjects work rate increased. On the other hand, penetration into the half mask did not change with work rate. The penetration increased as the air flow was decreased in all cases for the helmets and for beard and stubble cases for the half mask. However, for he tight-fitting half mask on a clean-shaven face, the average penetration stayed below 0.001 for all flows. 18 figs, 5 tabs.

  16. A history of central collisions at the Bevalac

    SciTech Connect

    Poskanzer, A.M.

    1989-07-01

    You have heard a great deal about Plastic Ball results at this conference. There were talks on the first morning by Hans-Georg Ritter and Karl-Heinz Kampert on the Plastic Ball at Berkeley, there will be a talk next week by Rudi Schmidt on the Plastic Ball at CERN, and many other speakers have mentioned Plastic Ball results. The young students may think that when the new field of relativistic heavy ion physics opened up, an ideal detector was designed and built, data immediately analyzed, and results produced. The theme of my talk is to show that this is incorrect. The experiments proceeded in logical stages, one building upon the other, increasing in complexity and sophistication. The analysis techniques and the theory developed along with the experiments. If the more senior people in the audience easily remember this history of the development of the relativistic heavy ion field, they may spend their time during this talk thinking about what is happening now and what will happen in the future in the ultrarelativistic heavy ion field, where I believe history is repeating itself. 18 refs., 18 figs.

  17. Bioconversion of coal-derived synthesis gas to liquid fuels. [Butyribacterium methylotrophicum

    SciTech Connect

    Jain, M.K.

    1991-01-01

    The use of coal-derived synthesis gas as an industrial feedstock for production of fuels and chemicals has become an increasingly attractive alternative to present petroleum-based chemicals production. However, one of the major limitations in developing such a process is the required removal of catalyst poisons such as hydrogen sulfide (H{sub 2}S), carbonyl sulfide (COS), and other trace contaminants from the synthesis gas. Purification steps necessary to remove these are energy intensive and add significantly to the production cost, particularly for coals having a high sulfur content such as Illinois coal. A two-stage, anaerobic bioconversion process requiring little or no sulfur removal is proposed, where in the first stage the carbon monoxide (CO) gas is converted to butyric and acetic acids by the CO strain of Butyribacterium methylotrophicum. In the second stage, these acids along with the hydrogen (H{sub 2}) gas are converted to butanol, ethanol, and acetone by an acid utilizing mutant of Clostridium acetobutylicum. 18 figs., 18 tabs.

  18. Bioconversion of coal-derived synthesis gas to liquid fuels. Final technical report, September 1, 1990--August 31, 1991

    SciTech Connect

    Jain, M.K.

    1991-12-31

    The use of coal-derived synthesis gas as an industrial feedstock for production of fuels and chemicals has become an increasingly attractive alternative to present petroleum-based chemicals production. However, one of the major limitations in developing such a process is the required removal of catalyst poisons such as hydrogen sulfide (H{sub 2}S), carbonyl sulfide (COS), and other trace contaminants from the synthesis gas. Purification steps necessary to remove these are energy intensive and add significantly to the production cost, particularly for coals having a high sulfur content such as Illinois coal. A two-stage, anaerobic bioconversion process requiring little or no sulfur removal is proposed, where in the first stage the carbon monoxide (CO) gas is converted to butyric and acetic acids by the CO strain of Butyribacterium methylotrophicum. In the second stage, these acids along with the hydrogen (H{sub 2}) gas are converted to butanol, ethanol, and acetone by an acid utilizing mutant of Clostridium acetobutylicum. 18 figs., 18 tabs.

  19. Electro-optic voltage sensor for sensing voltage in an E-field

    DOEpatents

    Woods, G.K.; Renak, T.W.

    1999-04-06

    A miniature electro-optic voltage sensor system capable of accurate operation at high voltages is disclosed. The system employs a transmitter, a sensor disposed adjacent to but out of direct electrical contact with a conductor on which the voltage is to be measured, a detector, and a signal processor. The transmitter produces a beam of electromagnetic radiation which is routed into the sensor where the beam undergoes the Pockels electro-optic effect. The electro-optic effect causes phase shifting in the beam, which is in turn converted to a pair of independent beams, from which the voltage of a system based on its E-field is determined when the two beams are normalized by the signal processor. The sensor converts the beam by splitting the beam in accordance with the axes of the beam`s polarization state (an ellipse whose ellipticity varies between -1 and +1 in proportion to voltage) into at least two AM signals. These AM signals are fed into a signal processor and processed to determine the voltage between a ground conductor and the conductor on which voltage is being measured. 18 figs.

  20. Solar-driven coal gasification in a thermally irradiated packed-bed reactor

    SciTech Connect

    Nicolas Piatkowski; Aldo Steinfeld

    2008-05-15

    Coal gasification for high-quality synthesis gas production is considered using concentrated solar energy as the source of high-temperature process heat. The solar reactor consists of two cavities separated by a radiant emitter plate, with the upper one serving as the solar absorber and the lower one containing the reacting packed bed that shrinks as the reaction progresses. A 5 kW prototype reactor with an 8 cm depth, 14.3 cm diameter cylindrical bed was fabricated and tested in a high-flux solar furnace, subjected to solar flux concentrations up to 2600 suns and packed-bed temperatures up to 1440 K. The reactor is modeled by formulating the 1D unsteady energy conservation equation that couples conductive-radiative heat transfer with the reaction kinetics and solving it by the finite volume technique for a transient shrinking domain. The overall reaction rate was determined experimentally by thermogravimetry, while the effective thermal conductivity was determined experimentally in a radial heat flow oven. Model validation was accomplished in terms of bed temperatures, gasified mass, and bed shrink rates measured in solar experiments conducted with beech charcoal. Heat transfer through the bed proved to be the rate-controlling mechanism, indicating an ablation regime. 31 refs., 18 figs.

  1. Work plan for the remedial investigation/feasibility study-environmental assessment for the Colonie site, Colonie, New York

    SciTech Connect

    Not Available

    1990-06-01

    This work plan has been prepared to document the scoping and planning process performed by the US Department of Energy (DOE) to support remedial action activities at the Colonie site. The site is located in eastern New York State in the town of Colonie near the city of Albany. Remedial action of the Colonie site is being planned as part of DOE's Formerly Utilized Sites Remedial Action Program. The DOE is responsible for controlling the release of all radioactive and chemical contaminants from the site. Under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), a remedial investigation/feasibility study (RI/FS) must be prepared to support the decision-making process for evaluating remedial action alternatives. This work plan contains a summary of information known about the site as of January 1988, presents a conceptual site model that identifies potential routes of human exposure to site containments, identifies data gaps, and summarizes the process and proposed studies that will be used to fill the data gaps. In addition, DOE activities must be conducted in compliance with the National Environmental Policy Act (NEPA), which requires consideration of the environmental consequences of a proposed action as part of its decision-making process. This work also describes the approach that will be used to evaluate potential remedial action alternatives and includes a description of the organization, project controls, and task schedules that will be employed to fulfill the requirements of both CERCLA and NEPA. 48 refs., 18 figs., 25 tabs.

  2. Mechanism of stress-corrosion cracking of Alloy X-750 in high purity water

    SciTech Connect

    Grove, C.A.; Petzold, L.D.

    1985-11-01

    The high strength Ni-base Alloy X-750 is susceptible to stress-corrosion cracking (SCC) in high purity, deaerated water. Crack initiation occurs at high temperatures (>400F). Crack propagation occurs in both high-temperature and low-temperature (<300F) water. High-temperature crack growth rates are on the order of mils/day. Low-temperature cracking is extremely rapid (approx.100 in./day). Three heat treatments of Alloy X-750 are investigated: (1) Stress Equalized - 1625F/24 hr + 1300F/20 hr, (2) Direct Aged - 1300F/24 hr, and (3) Solution Annealed and Direct Aged - 2000F/1 hr + 1300F/20 hr. Stress-equalized Alloy X-750 is most susceptible to SCC; solution-annealed and direct-aged Alloy X-750 is least susceptible. A Hydrogen Embrittlement Model of SCC is developed that predicts SCC performance on the basis of grain boundary chemistry and grain boundary carbides. Phosphorus segregates to the grain boundary in concentrations of up to approx.100 times the bulk concentration during processing and heat treatment. Phosphorus at the grain boundaries increases susceptibility to high- and low-temperature SCC. The presence of M23C6-type carbides and/or the absence of MC-type carbides at the grain boundaries improves SCC performance in high-temperature water. 18 figs., 5 tabs.

  3. Recovery process for electroless plating baths

    DOEpatents

    Anderson, R.W.; Neff, W.A.

    1992-05-12

    A process is described for removing, from spent electroless metal plating bath solutions, accumulated byproducts and counter-ions that have deleterious effects on plating. The solution, or a portion thereof, is passed through a selected cation exchange resin bed in hydrogen form, the resin selected from strong acid cation exchangers and combinations of intermediate acid cation exchangers with strong acid cation exchangers. Sodium and nickel ions are sorbed in the selected cation exchanger, with little removal of other constituents. The remaining solution is subjected to sulfate removal through precipitation of calcium sulfate hemihydrate using, sequentially, CaO and then CaCO[sub 3]. Phosphite removal from the solution is accomplished by the addition of MgO to form magnesium phosphite trihydrate. The washed precipitates of these steps can be safely discarded in nontoxic land fills, or used in various chemical industries. Finally, any remaining solution can be concentrated, adjusted for pH, and be ready for reuse. The plating metal can be removed from the exchanger with sulfuric acid or with the filtrate from the magnesium phosphite precipitation forming a sulfate of the plating metal for reuse. The process is illustrated as applied to processing electroless nickel plating baths. 18 figs.

  4. Time-dependent two-dimensional radiation hydrodynamics of accreting matter onto highly magnetized neutron stars

    SciTech Connect

    Klein, R.I. . Dept. of Astronomy Lawrence Livermore National Lab., CA California Univ., Los Angeles, CA . Inst. of Geophysics and Planetary Physics); Arons, J. . Dept. of Astronomy California Univ., Los Angeles, CA . Inst. of Geophysics and Planetary Physics CEA Centre d'Etudes Nucleaires de Saclay, 91 -

    1989-11-24

    We present for the first time, the self-consistent solution of the two-dimensional, time-dependent equations of radiation-hydrodynamics governing the accretion of matter onto the highly magnetized polar caps of luminous x-ray pulsars. The calculations show a structure in the accretion column very different from previous one-zone uniform models. We have included all the relevant magnetic field corrections to both the hydrodynamics and the radiative transport. We include a new theory for the diffusion and advection of both radiation energy density and photon number density. For initially uniformly accreting models with super-Eddington flows, we have uncovered evidence of strong radiation-driven outflowing optically thin radiation filled regions of the accretion column embedded in optically-thick inflowing plasma. The development of these photon bubbles'' have growth times on the order of a millisecond and show fluctuations on sub-millisecond timescales. The photon bubbles are likely to be a consequence of convective over-stability and may result in observable fluctuations in the emitted luminosity leading to luminosity dependent changes in the pulse profile. This may provide important new diagnostics for conditions in accreting x-ray pulsars. 13 refs., 18 figs.

  5. Identification of hydrocarbon sources in the benthic sediments of Prince William Sound and the Gulf of Alaska following the Exxon Valdez oil spill

    SciTech Connect

    Page, D.S.; Boehm, P.D.; Douglas, G.S.; Bence, A.E.

    1995-12-31

    Advanced hydrocarbon fingerprinting methods and improved analytical methods make possible the quantitative discrimination of the multiple sources of hydrocarbons in the benthic sediments of Prince William Sound (PWS) and the Gulf of Alaska. These methods measure an extensive range of polycyclic aromatic hydrocarbons (PAH) at detection levels that are as much as two orders of magnitude lower than those obtained by standard Environmental Protection Agency methods. Nineteen hundred thirty six subtidal sediment samples collected in the sound and the eastern Gulf of Alaska in 1989, 1990, and 1991 were analyzed. Fingerprint analyses of gas chromatography-mass spectrometry data reveal a natural background of petrogenic and biogenic PAH. Exxon Valdez crude, its weathering products, and diesel fuel refined from Alaska North Slope crude are readily distinguished from the natural seep petroleum background and from each other because of their distinctive PAH distributions. Mixing models were developed to calculate the PAH contributions from each source to each sediment sample. These calculations show that most of the seafloor in PWS contains no detectable hydrocarbons from the Exxon Valdez spill, although elevated concentrations of PAH from seep sources are widespread. In those areas where they were detected, spill hydrocarbons were generally a small increment to the natural petroleum hydrocarbon background. Low levels of Exxon Valdez crude residue were present in 1989 and again in 1990 in nearshore subtidal sediments off some shorelines that had been heavily oiled. By 1991 these crude residues were heavily degraded and even more sporadically distributed. 58 refs., 18 figs., 5 tabs.

  6. Advanced technology and manufacturing practices for machining and inspecting metal matrix composites. Final CRADA report for CRADA number Y-1292-0092

    SciTech Connect

    Fell, H.A.; Shelton, J.E.; LaMance, G.M.; Kennedy, C.R.

    1995-02-26

    Lockheed Martin Energy Systems, Inc. (Energy Systems) and the Lanxide Corporation (Lanxide) negotiated a Cooperative Research and Development Agreement (CRADA) to develop advanced technology and manufacturing practices for machining and inspecting metal matrix composites (MMC). The objective of this CRADA was to develop machining parameters to allow manufacturing of automotive components from MMCs. These parts exhibit a range of shapes and dimensional tolerances and require a large number of machining operations. The common characteristic of the components is the use of the light weight MMC materials to replace heavier materials. This allows smaller and lighter moving parts and supporting structural components thereby increasing fuel mileage. The CRADA was divided into three areas: basic investigation of cutting parameters, establishment of a mock production line for components, and optimization of parameters in the mock facility. This report covers the manufacturing of MMCs and preliminary Phase I testing for silicon carbide having various loading percentages and extensive Phase I testing of cutting parameters on 30% alumina loaded aluminum. On January 26, 1995, a letter from the vice president, technology at Lanxide was issued terminating the CRADA due to changes in business. 9 refs., 18 figs., 3 tabs.

  7. Relativistic nuclear many-body theory

    SciTech Connect

    Serot, B.D. ); Walecka, J.D. . Continuous Electron Beam Accelerator Facility)

    1991-09-11

    Nonrelativistic models of nuclear systems have provided important insight into nuclear physics. In future experiments, nuclear systems will be examined under extreme conditions of density and temperature, and their response will be probed at momentum and energy transfers larger than the nucleon mass. It is therefore essential to develop reliable models that go beyond the traditional nonrelativistic many-body framework. General properties of physics, such as quantum mechanics, Lorentz covariance, and microscopic causality, motivate the use of quantum field theories to describe the interacting, relativistic, nuclear many-body system. Renormalizable models based on hadronic degrees of freedom (quantum hadrodynamics) are presented, and the assumptions underlying this framework are discussed. Some applications and successes of quantum hadrodynamics are described, with an emphasis on the new features arising from relativity. Examples include the nuclear equation of state, the shell model, nucleon-nucleus scattering, and the inclusion of zero-point vacuum corrections. Current issues and problems are also considered, such as the construction of improved approximations, the full role of the quantum vacuum, and the relationship between quantum hadrodynamics and quantum chromodynamics. We also speculate on future developments. 103 refs., 18 figs.

  8. The effects of a perturbed source on contaminant transport near the Weldon Spring quarry

    SciTech Connect

    Tomasko, D.

    1989-03-01

    The effects of a perturbed contamination source at the Weldon Spring quarry in St. Charles County, Missouri, on downstream solute concentrations were investigated using one-dimensional analytical solutions to an advection-dispersion equation developed for both constant-strength and multiple-stepped source functions. A sensitivity study using parameter base-case values and ranges consistent with the geologic conceptualization of the quarry area indicates that the parameters having the greatest effect on predicted concentrations are the distance from the quarry to the point of interest, the average linear groundwater velocity, the contaminant retardation coefficient, and the amplitude and duration of the source perturbation caused by response action activities. Use of base-case parameter value and realistic values for the amplitude and duration of the source perturbation produced a small effect on solute concentrations near the western extremity of the nearby municipal well field, as well as small uncertainties in the predicted results for the assumed model. The effect of simplifying assumptions made in deriving the analytic solution is unknown: use of a multidimensional flow and transport model and additional field work are needed to validate the model. 13 refs., 18 figs.

  9. Photon beam position monitor

    DOEpatents

    Kuzay, T.M.; Shu, D.

    1995-02-07

    A photon beam position monitor is disclosed for use in the front end of a beamline of a high heat flux and high energy photon source such as a synchrotron radiation storage ring detects and measures the position and, when a pair of such monitors are used in tandem, the slope of a photon beam emanating from an insertion device such as a wiggler or an undulator inserted in the straight sections of the ring. The photon beam position monitor includes a plurality of spaced blades for precisely locating the photon beam, with each blade comprised of chemical vapor deposition (CVD) diamond with an outer metal coating of a photon sensitive metal such as tungsten, molybdenum, etc., which combination emits electrons when a high energy photon beam is incident upon the blade. Two such monitors are contemplated for use in the front end of the beamline, with the two monitors having vertically and horizontally offset detector blades to avoid blade ''shadowing''. Provision is made for aligning the detector blades with the photon beam and limiting detector blade temperature during operation. 18 figs.

  10. Transition-metal doped sulfide, selenide, and telluride laser crystal and lasers

    DOEpatents

    Krupke, W.F.; Page, R.H.; DeLoach, L.D.; Payne, S.A.

    1996-07-30

    A new class of solid state laser crystals and lasers are formed of transition metal doped sulfide, selenide, and telluride host crystals which have four fold coordinated substitutional sites. The host crystals include II-VI compounds. The host crystal is doped with a transition metal laser ion, e.g., chromium, cobalt or iron. In particular, Cr{sup 2+}-doped ZnS and ZnSe generate laser action near 2.3 {micro}m. Oxide, chloride, fluoride, bromide and iodide crystals with similar structures can also be used. Important aspects of these laser materials are the tetrahedral site symmetry of the host crystal, low excited state absorption losses and high luminescence efficiency, and the d{sup 4} and d{sup 6} electronic configurations of the transition metal ions. The same materials are also useful as saturable absorbers for passive Q-switching applications. The laser materials can be used as gain media in amplifiers and oscillators; these gain media can be incorporated into waveguides and semiconductor lasers. 18 figs.

  11. Studies on a novel approach for the separation of L-phenylalanine amino acid from fermentation broth using a newly developed charged ultrafiltration membrane. I. Single solute system

    SciTech Connect

    Agarwal, A.K.; Huang, R.Y.M. )

    1994-01-01

    A newly developed thin-film composite (TFC) ultrafiltration membrane made of sulfonated poly(phenylene oxide) (SPPO) was used to establish the feasibility of separating L-phenylalanine from the fermentation broth containing a number of dissolved inorganic and organic solutes as an alternative approach to the currently used complex and uneconomical conventional ion-exchange schemes. It was found that the rejection of inorganic salts in a single component system was highly dependent on the feed solution concentration and varied inversely with it. The pH of the feed solution was found to have a strong effect on the rejection of L-phenylalanine, changing it from - 10 to 90%. This rejection behavior was identical for the two TFC-SPPO membrane samples which had molecular weight cutoff ratings of 10,000 and 20,000, respectively, although the permeate flux of the latter sample was almost twice that of the former sample. It was found that glucose molecules were not rejected by the membrane. 11 refs., 18 figs., 2 tab.

  12. Impact of air and refrigerant maldistributions on the performance of finned-tube evaporators with R-22 and R-407C. Final Report

    SciTech Connect

    Lee, Jangho; Domanski, P.A.

    1997-07-01

    The report presents basic features of the evaporator model, EVAP5M, and simulation results for an evaporator operating with R-22 and R-407C at non-uniform air and refrigerant distributions. EVAP5M was developed under this project to provide a tool for simulating a finned-tube air-to refrigerant evaporator operating with single-component refrigerants and refrigerant mixtures. The tube-by-tube modeling approach allowed for one-dimensional non-uniformity in the air velocity profile and arbitrary maldistribution on the refrigerant side. The model uses the Carnahan-Starling-DeSantis equation of state for calculating refrigerant thermodynamic properties. Simulations were performed for three evaporator slabs with different refrigerant circuitry designs. For the maldistributions studied, maldistributed air caused much more significant capacity degradation than maldistributed refrigerant. In some cases capacity decreased to as low as 57 percent of the value obtained for uniform velocity profile. Simulation results showed that R-22 and R-407C have similar susceptibility to capacity degradation. Relative change of capacity varied depending on the evaporator design and maldistribution studied. 17 refs., 18 figs., 9 tabs.

  13. Drilling, completion, and testing of geothermal wells CD-1 and CD-2, Caliente, Nevada

    SciTech Connect

    Larson, K.; Flynn, T.

    1982-01-01

    Two geothermal test wells were drilled in January 1983, in Antelope Canyon to access the potential for resource utilization by the City of Caliente's proposed space heating district. Both holes, drilled into bedrock at 220 feet, encountered hot water in the upper part of the hole (40 to 100 feet) and cooler water below (100 to 210 feet). A series of pumping tests were completed in February 1983, including pump-efficiency tests, stepped draw-down tests, and 1-, 2-, and 3-day sustained pumping tests. The test results indicated that the transmissivity of the thermal aquifer is very, very high. Five water samples were collected for chemical analyses during the course of CD-1 pump tests. The samples were collected to determine the water quality for the proposed space heating district and possible reinjection, and to establish a water chemistry base-line for comparative analysis of fluid chemistry during the course of the pumping and from subsequent development. 7 refs., 18 figs., 3 tabs.

  14. Multiaxial graphite test specimen

    SciTech Connect

    1988-09-01

    A multiaxial test program is to be conducted by Oak Ridge National Laboratory (ORNL) on the core component graphite. The objectives of the tests are to obtain failure data under uniaxial and biaxial states of stress in order to construct a failure surface in a two-dimensional stress space. These data will be used in verifying the accuracy of the maximum stress failure theory being proposed for use in designing the core graphite components. Tubular specimens are proposed to be used and are either loaded axially and/or subjected to internal pressure. This report includes a study on three specimen configurations. The conclusions of that study indicate that an elliptical transition geometry procedures the smallest discontinuity effects. Several loading combustions were studied using the elliptical transition specimen. The primary purpose is to establish the location of the highest stress state and its relation to the gage section for all of the loading conditions. The tension/internal pres sure loading condition (1:1) indicated that the high stress area is just outside the gage section but still should be acceptable. 5 refs., 18 figs.

  15. Scale length study in TFTR (Tokamak Fusion Test Reactor)

    SciTech Connect

    Hiroe, S.; Goldston, R.J.; Bitter, M.; Bush, C.E.; Efthimion, P.C.; Grek, B.; Johnson, D.W.; Murakami, M.; Schivell, J.; Towner, H.H.

    1988-12-01

    The scale lengths of the electron density (L/sub n//sub e/), temperature (L/sub T//sub e/), and pressure (L/sub p//sub e/) gradients were investigated during the 1985 operating period of the Tokamak Fusion Test Reactor (TFTR) for gas-fueled plasmas with neutral beam injection and movable limiter. Although the global energy confinement time degrades as the heating power increases or the plasma current decreases, the radial profiles of the scale lengths (L/sub T//sub e/ and L/sup p//sub e/) remain unchanged. Especially, the electron pressure profile is constrained not to change. This trend appears to hold over a fairly wide range of TFTR operational regimes. The radial profiles of L/sub n//sub e/ and /eta//sub e/ (= L/sub n//sub e//L/sub T//sub e/) also appear to remain unchanged, although the uncertainties of the experimental data for these quantities are greater than those for L/sub T//sub e/ and L/sub p//sub e/. The experimental parameters are used to evaluate theoretical predictions of the electron thermal diffusivity, and the results are compared with the empirical thermal diffusivity. 34 refs., 18 figs., 2 tabs.

  16. Advanced Materials Development Program: Ceramic Technology for Advanced Heat Engines program plan, 1983--1993

    SciTech Connect

    Not Available

    1990-07-01

    The purpose of the Ceramic Technology for Advanced Heat Engines (CTAHE) Project is the development of an industrial technology base capable of providing reliable and cost-effective high temperature ceramic components for application in advanced heat engines. There is a deliberate emphasis on industrial'' in the purpose statement. The project is intended to support the US ceramic and engine industries by providing the needed ceramic materials technology. The heat engine programs have goals of component development and proof-of-concept. The CTAHE Project is aimed at developing generic basic ceramic technology and does not involve specific engine designs and components. The materials research and development efforts in the CTAHE Project are focused on the needs and general requirements of the advanced gas turbine and low heat rejection diesel engines. The CTAHE Project supports the DOE Office of Transportation Systems' heat engine programs, Advanced Turbine Technology Applications (ATTAP) and Heavy Duty Transport (HDT) by providing the basic technology required for development of reliable and cost-effective ceramic components. The heat engine programs provide the iterative component design, fabrication, and test development logic. 103 refs., 18 figs., 11 tabs.

  17. Bias in peak clad temperature predictions due to uncertainties in modeling of ECC bypass and dissolved non-condensable gas phenomena

    SciTech Connect

    Rohatgi, U.S.; Neymotin, L.Y.; Jo, J.; Wulff, W. )

    1990-09-01

    This report describes a general method for estimating the effect on the Reflood Phase PCT from systematic errors (biases) associated with the modelling of the ECCS and dissolved nitrogen, and the application of this method in estimating biases in the Reflood Phase PCT (second PCT) predicted by the TRAC/PF1/MOD1, Version 14.3. The bias in the second PCT due to the uncertainty in the existing code models for ECCS related phenomena is {minus}19{degree}K ({minus}34{degree}F). The negative bias implies that the code models for this phenomena are conservative. The bias in the second PCT due to the lack of modelling of dissolved N{sub 2} in the code is estimated to be 9.9{degree}K (17.8{degree}F). The positive bias implies that the absence of dissolved N{sub 2} model makes the code prediction of PCT non-conservative. The bias estimation in this report is a major exception among all other uncertainty and bias assessments performed in conjunction with the CSAU methodology demonstration, because this bias estimation benefitted from using full-scale test data from the full-scale Upper Plenum Test Facility (UPTF). Thus, the bias estimates presented here are unaffected by scale distortions in test facilities. Data from small size facilities were also available and an estimate of bias based on these data will be conservative. 35 refs., 18 figs., 5 tabs.

  18. Northwest Hazardous Waste Research, Development, and Demonstration Center: Program Plan. [Contains glossary

    SciTech Connect

    Not Available

    1988-02-01

    The Northwest Hazardous Waste Research, Development, and Demonstration Center was created as part of an ongoing federal effort to provide technologies and methods that protect human health and welfare and environment from hazardous wastes. The Center was established by the Superfund Amendments and Reauthorization Act (SARA) to develop and adapt innovative technologies and methods for assessing the impacts of and remediating inactive hazardous and radioactive mixed-waste sites. The Superfund legislation authorized $10 million for Pacific Northwest Laboratory to establish and operate the Center over a 5-year period. Under this legislation, Congress authorized $10 million each to support research, development, and demonstration (RD and D) on hazardous and radioactive mixed-waste problems in Idaho, Montana, Oregon, and Washington, including the Hanford Site. In 1987, the Center initiated its RD and D activities and prepared this Program Plan that presents the framework within which the Center will carry out its mission. Section 1.0 describes the Center, its mission, objectives, organization, and relationship to other programs. Section 2.0 describes the Center's RD and D strategy and contains the RD and D objectives, priorities, and process to be used to select specific projects. Section 3.0 contains the Center's FY 1988 operating plan and describes the specific RD and D projects to be carried out and their budgets and schedules. 9 refs., 18 figs., 5 tabs.

  19. Testing the effectiveness of mobile home weatherization measures in a controlled environment: The SERI CMFERT (Collaborative Manufactured Buildings Facility for Energy Research and Training) Project

    SciTech Connect

    Judkoff, R.D.; Hancock, C.E.; Franconi, E.

    1990-03-01

    For several years the Solar Energy Research Institute has been testing the effectiveness of mobile home weatherization measures, with the support of the US DOE Office of State and Local Assistance Programs Weatherization Assistance Program, the DOE Office of Buildings and Community Systems, the seven states within the federal Weatherization Region 7, the Colorado Division of Housing, and the DOE Denver Support Office. During the winter of 1988--89, several weatherization measures were thermally tested on three mobile homes under controlled conditions inside a large environmental enclosure. The effects of each weatherization measure on conduction losses, infiltration losses, and combined furnace and duct-delivered heat efficiency were monitored. The retrofit options included air sealing, duct repair, furnace tune-up, interior storm panels, floor insulation, and roof insulation. The study demonstrated that cost-effective heating energy savings of about 20% to 50% are possible if weatherization techniques adapted to the special construction details in mobile homes are applied. 24 refs., 18 figs., 9 tabs.

  20. Remote installation of risers on underground nuclear waste storage tanks

    SciTech Connect

    Jackson, J.P.; Gessner, R.F.

    1988-03-01

    The West Valley Demonstration Project was established to solidify 2120 m/sup 3/ (560,000) gallons of high-level nuclear waste generated during six years of commercial nuclear fuel reprocessing. This liquid will be processed to remove radioactive elements which, with the remaining sludge, will be combined with glass formers and be converted into borosilicate glass. Risers were installed on the high-level tank for installation of pumps which will be used to remove the liquid and sludge. The extensive use of remote technology was required to install the risers and to minimize operator exposure to high levels of radiation and contamination. The riser installation required remotely: drilling through two feet of concrete shielding; installing pump access pipes which are welded to the tank top; and cutting holes in tanks located 3658 mm (12) feet below ground. These operations were successfully completed 13 times without exposing personnel to high-level radiation or contamination. Specially designed remote equipment was developed for each step of this operation. Extensive operator training in the use of this equipment was performed on a tank with low radiation prior to work on the high-level tank. This paper discusses the application of remote technology that assured a quality job was safely accomplished. 3 refs., 18 figs., 2 tabs.

  1. Theory of bulk and interface constant phase elements in electrode- electrolyte systems

    SciTech Connect

    Liu, S.H.

    1991-01-01

    This paper summarizes the progress gained in the last few years in our understanding of bulk and interface constant-phase-angle (CPA) behavior in electrode-electrolyte systems. It is now fairly well established that the interface constant-phase element originates from the fractal nature of the interface. The complex geometry gives rise to a fractal distribution of parallel current paths, and the competition between these paths results in the fractional power law behavior of the impedance across the interface. On the other hand, the early hope of relating the CPA exponent to the fractal dimension of the interface has been shown to be unattainable. Our understanding of the bulk CPA behavior, which is most prevalent in solid electrolytes, is only tentative. It is illustrated using a simple model that, under nonlinear dynamical laws that govern the flow of ions in the electrolyte, a current in the solid can generate a fractal distribution of vacancies which tend to impede the flow. The current is forced to negotiate a complex path through the solid, and the resulting fluctuation in path length and flow rate could be a source of the CPA behavior. 32 refs., 18 figs.

  2. Ceramic fabrication R D

    SciTech Connect

    Not Available

    1990-01-01

    This project is separated into three tasks. The first task is a design and modeling effort to be carried out by MSE, Inc. The purpose of this task is to develop and analyze designs for various cohesive ceramic fabrication (CCF) components. This quarter, the advanced molybdenum disicilide MHD electrode design was essentially completed. Final refinements will be made after molybdenum disilicide processing results are available and the final layer compositions are established. Work involving whisker incorporation was initiated on the high stress component. It is unlikely that whiskers will become low cost, so particulate reinforcement will be pursued. Modeling work will resume once a suitable aluminum oxide/silicon carbide composition is selected that can be fired to acceptable densities by pressureless sintering. Task 2, subcontracted to Applied Technology Laboratories (ATL), is principally directed at establishing a property data base for monolithic and laminated alumina fabricated using the CCF process. This quarter, ATL demonstrated that the CCF process does not compromise the flexure strength of alumina. Task 3, subcontracted to Ceramics Binder Systems, Inc., focused on CCF silicon carbide particulate reinforced alumina and on the development of processing procedures for nonoxide molybdenum disilicide. Preliminary results indicate that achieving high densities in silicon carbide particulate reinforced aluminum oxide will be difficult. Molybdenum disilicide results are encouraging, and it is clear that the CCF process will work with this nonoxide material. 3 refs., 18 figs., 4 tabs.

  3. Material selection for electrooptic deflectors

    SciTech Connect

    Not Available

    1988-09-01

    The selection of a material for a practical device is generally guided by a number of criteria, including cost, size, difficulty of fabrication, durability, driver requirements, and system constraints. A quantitative analysis can usually be made for comparison, or a figure of merit can be computed. In the case of materials for electrooptical (EO) devices the choice is often made based on the availability of materials meeting some minimum system requirement. For fast EO deflectors, where a large number of resolvable spots is required, the choice of materials is quite limited. A model of just such a device is proposed; it is based on the resolution of 400 spots and reasonable boundary conditions. The model predicts that to be successful, an EO material must be chosen that has a linear EO coefficient (r/sub 33/) of at least 336 pm/V. A survey was conducted of the EO materials which are generally available. Based on the model and the survey, Czochralski crystal growth of strontium barium niobate (SBN:60) is recommended. Although SBN:60 does not have the largest EO coefficient, it may be the easiest to grow in the required size and optical quality, thus satisfying the availability criterion. It should be borne in mind that many materials may be grown by this technique and there are many new and potential applications for EO materials. 92 refs., 18 figs., 14 tabs.

  4. Metallic phase-change materials for solar dynamic energy storage systems

    SciTech Connect

    Lauf, R.J.; Hamby, C. Jr.

    1990-12-01

    Solar (thermal) dynamic power systems for satellites require a heat storage system that is capable of operating the engine during eclipse. The conventional approach to this thermal storage problem is to use the latent heat of fluoride salts, which would melt during insolation and freeze during eclipse. Although candidate fluorides have large heats of fusion per unit mass, their poor thermal conductivity limits the rate at which energy can be transferred to and from the storage device. System performance is further limited by the high parasitic mass of the superalloy canisters needed to contain the salt. This report describes a new thermal storage system in which the phase-change material (PCM) is a metal (typically germanium) contained in modular graphite canisters. These modules exhibit good thermal conductivity and low parasitic mass, and they are physically and chemically stable. Prototype modules have survived over 600 melt/freeze cycles without degradation. Advanced concepts to further improve performance are described. These concepts include the selection of ternary eutectic alloys to provide a wider range of useful melting temperatures and the use of infiltration to control the location of liquid alloy and to compensate for differences in thermal expansion. 13 refs., 18 figs.

  5. RAMONA-4B a computer code with three-dimensional neutron kinetics for BWR and SBWR system transient - user`s manual

    SciTech Connect

    Rohatgi, U.S.; Cheng, H.S.; Khan, H.J.; Mallen, A.N.; Neymotin, L.Y.

    1998-03-01

    This document is the User`s Manual for the Boiling Water Reactor (BWR), and Simplified Boiling Water Reactor (SBWR) systems transient code RAMONA-4B. The code uses a three-dimensional neutron-kinetics model coupled with a multichannel, nonequilibrium, drift-flux, phase-flow model of the thermal hydraulics of the reactor vessel. The code is designed to analyze a wide spectrum of BWR core and system transients. Chapter 1 gives an overview of the code`s capabilities and limitations; Chapter 2 describes the code`s structure, lists major subroutines, and discusses the computer requirements. Chapter 3 is on code, auxillary codes, and instructions for running RAMONA-4B on Sun SPARC and IBM Workstations. Chapter 4 contains component descriptions and detailed card-by-card input instructions. Chapter 5 provides samples of the tabulated output for the steady-state and transient calculations and discusses the plotting procedures for the steady-state and transient calculations. Three appendices contain important user and programmer information: lists of plot variables (Appendix A) listings of input deck for sample problem (Appendix B), and a description of the plotting program PAD (Appendix C). 24 refs., 18 figs., 11 tabs.

  6. Heavy-Section Steel Technology Program fracture issues

    SciTech Connect

    Pennell, W.E.

    1991-01-01

    Large-scale fracture mechanics tests have resulted in the identification of a number of fracture-technology issues. Identification of additional issues has come from the reactor vessel materials-irradiation test program and from reactor operating experience. This paper provides a review of fracture issues with an emphasis on their potential impact on a reactor vessel pressurized-thermal-shock (PTS) analysis. Mixed-mode crack propagation emerges as a major issue, due in large measure to the poor performance of existing models for the prediction of ductile tearing. Rectification of ductile tearing technology deficiencies may require extending the technology to include a more complete treatment of stress-state and loading history effects. The effect of cladding on vessel fracture remains uncertain to the point that it is not possible to determine at this time if the net effect will be positive or negative. Enhanced fracture toughness for shallow flaws has been demonstrated for low-strength structural steels. Demonstration of a similar effect in reactor pressure vessel steels could have a significant beneficial effect on the probabilistic analysis of reactor vessel fracture. Further development of existing fracture-mechanics models and concepts is required to meet the special requirements for fracture evaluation of circumferential flaws in the welds of ring-forged vessels. Fracture technology advances required to address the issues discussed in this paper are the major objective for the ongoing Heavy-Section Steel Technology (HSST) Program at Oak Ridge National Laboratory (ORNL). 22 refs., 18 figs.

  7. Neutron attenuation characteristics of polyethylene, polyvinyl chloride, and heavy aggregate concrete and mortars

    SciTech Connect

    Abdul-Majid, S.; Othman, F.

    1994-03-01

    Polyethylene and polyvinyl chloride pellets were introduced into concrete to improve its neutron attenuation characteristics while several types of heavy coarse aggregates were used to improve its gamma ray attenuation properties. Neutron and gamma ray attenuation were studied in concrete samples containing coarse aggregates of barite, pyrite, basalt, hematite, and marble as well as polyethylene and polyvinyl chloride pellets in narrow-beam geometry. The highest neutron attenuation was shown by polyethylene mortar, followed by polyvinyl chloride mortar; barite and pyrite concrete showed higher gamma ray attenuation than ordinary concrete. Broad-beam and continuous (infinite) medium geometries were used to study the neutron attenuation of samples containing polymers at different concentrations with and without heavy aggregates, the fitting equations were established, and from these the neutron removal coefficients were deduced. In a radiation field of neutrons and gamma rays, the appropriate concentration of polymer and heavy aggregate can be selected to give the optimum total dose attenuation depending on the relative intensities of each type of radiation. This would give much better design flexibility over ordinary concrete. The compressive strength tests performed on mortar and concrete samples showed that their value, in general, decreases as polymer concentration increases and that the polyvinyl chloride mortar showed higher values than the polyethylene mortar. For general construction purposes, the compression strength was considered acceptable in these samples. 34 refs., 16 figs., 4 tabs.

  8. Helicon wave excitation to produce energetic electrons for manufacturing semiconductors

    DOEpatents

    Molvik, A.W.; Ellingboe, A.R.

    1998-10-20

    A helicon plasma source is controlled by varying the axial magnetic field or rf power controlling the formation of the helicon wave. An energetic electron current is carried on the wave when the magnetic field is 90 G; but there is minimal energetic electron current when the magnetic field is 100 G in one particular plasma source. Similar performance can be expected from other helicon sources by properly adjusting the magnetic field and power to the particular geometry. This control for adjusting the production of energetic electrons can be used in the semiconductor and thin-film manufacture process. By applying energetic electrons to the insulator layer, such as silicon oxide, etching ions are attracted to the insulator layer and bombard the insulator layer at higher energy than areas that have not accumulated the energetic electrons. Thus, silicon and metal layers, which can neutralize the energetic electron currents will etch at a slower or non-existent rate. This procedure is especially advantageous in the multilayer semiconductor manufacturing because trenches can be formed that are in the range of 0.18--0.35 mm or less. 16 figs.

  9. Micropole undulator

    DOEpatents

    Csonka, P.L.; Tatchyn, R.O.

    1989-01-24

    Micropole undulators for use in the generation of x-rays from moving charged particles and methods for manufacturing such undulators are disclosed. One type of micropole undulator has two jaws containing rows of spaced apart poles arranged so that each pole produces a magnetic field aligned with all other similar fields. An external biasing field extends through the jaws so that an overall undulator field of substantially sinusoidal shape and substantially zero average value extends along the undulator axis. Preferably, the poles are bars formed of a magnetizable, but unmagnetized, material so that, after the jaws are assembled, all of the bars can be magnetized simultaneously in a uniform magnetic field of suitable strength. Another type of micropole undulator incorporates two parallel layers which have been magnetized to provide rows of alternating magnetic fields extending in opposite directions, the layers being positioned between the pole faces of a highly magnetically permeable material with the south poles of one layer opposite the north poles of the other. Poles in the layers are formed by subjecting successive regions of each layer to oppositely directed and suitably varied magnetizing forces. 16 figs.

  10. WFOV star tracker camera

    SciTech Connect

    Lewis, I.T. ); Ledebuhr, A.G.; Axelrod, T.S.; Kordas, J.F.; Hills, R.F. )

    1991-04-01

    A prototype wide-field-of-view (WFOV) star tracker camera has been fabricated and tested for use in spacecraft navigation. The most unique feature of this device is its 28{degrees} {times} 44{degrees} FOV, which views a large enough sector of the sky to ensure the existence of at least 5 stars of m{sub v} = 4.5 or brighter in all viewing directions. The WFOV requirement and the need to maximize both collection aperture (F/1.28) and spectral input band (0.4 to 1.1 {mu}m) to meet the light gathering needs for the dimmest star have dictated the use of a novel concentric optical design, which employs a fiber optic faceplate field flattener. The main advantage of the WFOV configuration is the smaller star map required for position processing, which results in less processing power and faster matching. Additionally, a size and mass benefit is seen with a larger FOV/smaller effective focal length (efl) sensor. Prototype hardware versions have included both image intensified and un-intensified CCD cameras. Integration times of {le} 50 msec have been demonstrated with both the intensified and un-intensified versions. 3 refs., 16 figs.

  11. SOMBRERO: A PC-tool to calculate shadows on arbitrarily oriented surfaces

    SciTech Connect

    Niewienda, A.; Heidt, F.D.

    1996-10-01

    Shaded areas of windows, solar thermal collectors or photovoltaic modules are of major importance for the calculation of solar heating- and cooling-loads of buildings as well as for the determination of thermal or electrical output of corresponding solar equipment. SOMBRERO, a PC-program written in Turbo-Pascal, calculates the GSC (geometrical shading coefficient), the proportion of shaded area of an arbitrarily oriented surface surrounded by shading elements as a function of time end location. Shading elements are treated as polygons (not necessarily rectangles) located in a plane and can be combined to bodies such as buildings or trees. They may also represent overhangs and side-wings of the building under consideration. Elements which are far away from the receiver area are treated as horizontal shading profiles. The reduction of (isotropic) diffuse radiation caused by different kinds of obstacles is calculated by mean of view-factors. Calculated results of the GSC are stored in ASCII-format and can be used as an input for dynamic solar system simulation programs. This is demonstrated in two illustrative examples showing the coupling of SOMBRERO with SUNCODE and TRNSYS in order to calculate the effects of shading on passive solar heating and passive cooling, respectively. 8 refs., 16 figs.

  12. Onesquethawan stratigraphy (Lower and Middle Devonian) of northeastern Pennsylvania

    SciTech Connect

    Epstein, J.B.

    1984-01-01

    Lower and Middle Devonian clastic rocks and limestones of the Onesquethawan Stage in the Valley and Ridge province of the Lehigh and Delaware Valleys of eastern Pennsylvania include the Esopus and Schoharie Formations, the Buttermilk Falls Limestone, and the Palmerton Sandstone. The Buttermilk Falls Limestone in Godfrey Ridge in the eastern part of the area is divided into three new members, from oldest to youngest: the Foxtown, McMichael, and Stroudsburg Members. The Palmerton Sandstone is present only southwest of Godfrey Ridge where it replaces the upper part of the Schoharie Formation and the basal Buttermilk Falls beds. The entire Onesquethawan sequence thins from about 560 feet (171 m) near Stroudsburg to 195 feet (59 m) along the northeast extension of the Pennsylvania Turnpike near Bowmanstown, a distance of 37 miles (60 km). The Tioga Ash Bed, which marks the top of the Onesquethawan Stage, lies immediately above the Buttermilk Falls near the Lehigh River and 27 feet (8 m) below the top of the Buttermilk Falls at Stroudsburg. These rocks were extensively leached by pre-Wisconsinan weathering southwest of the Wisconsinan terminal moraine near Saylorsburg. Outcrops are sparse in this area of deep weathering. The members of the Buttermilk Falls Limestone cannot be distinguished, and the Esopus and Schoharie Formations cannot be separated regionally, although they can be differentiated at a few localities of good exposure. 89 refs., 16 figs.

  13. International safeguards: Accounting for nuclear materials

    SciTech Connect

    Fishbone, L.G.

    1988-09-28

    Nuclear safeguards applied by the International Atomic Energy Agency (IAEA) are one element of the non-proliferation regime'', the collection of measures whose aim is to forestall the spread of nuclear weapons to countries that do not already possess them. Safeguards verifications provide evidence that nuclear materials in peaceful use for nuclear-power production are properly accounted for. Though carried out in cooperation with nuclear facility operators, the verifications can provide assurance because they are designed with the capability to detect diversion, should it occur. Traditional safeguards verification measures conducted by inspectors of the IAEA include book auditing; counting and identifying containers of nuclear material; measuring nuclear material; photographic and video surveillance; and sealing. Novel approaches to achieve greater efficiency and effectiveness in safeguards verifications are under investigation as the number and complexity of nuclear facilities grow. These include the zone approach, which entails carrying out verifications for groups of facilities collectively, and randomization approach, which entails carrying out entire inspection visits some fraction of the time on a random basis. Both approaches show promise in particular situations, but, like traditional measures, must be tested to ensure their practical utility. These approaches are covered on this report. 15 refs., 16 figs., 3 tabs.

  14. Multitasking runtime systems for the Cedar Multiprocessor

    SciTech Connect

    Guzzi, M.D.

    1986-07-01

    The programming of a MIMD machine is more complex than for SISD and SIMD machines. The multiple computational resources of the machine must be made available to the programming language compiler and to the programmer so that multitasking programs may be written. This thesis will explore the additional complexity of programming a MIMD machine, the Cedar Multiprocessor specifically, and the multitasking runtime system necessary to provide multitasking resources to the user. First, the problem will be well defined: the Cedar machine, its operating system, the programming language, and multitasking concepts will be described. Second, a solution to the problem, called macrotasking, will be proposed. This solution provides multitasking facilities to the programmer at a very coarse level with many visible machine dependencies. Third, an alternate solution, called microtasking, will be proposed. This solution provides multitasking facilities of a much finer grain. This solution does not depend so rigidly on the specific architecture of the machine. Finally, the two solutions will be compared for effectiveness. 12 refs., 16 figs.

  15. Fabric space radiators

    SciTech Connect

    Antoniak, Z.I.; Krotiuk, W.J.; Webb, B.J.; Prater, J.T.; Bates, J.M.

    1988-01-01

    Future Air Force space missions will require thermal radiators that both survive in the hostile space environment and stow away for minimal bulk during launch. Advances in all aspects of radiator design, construction, and analysis will be necessary to enable such future missions. Currently, the best means for obtaining high strength along with flexibility is through structures known as fabrics. The development of new materials and bonding techniques has extended the application range of fabrics into areas traditionally dominated by monolithic and/or metallic structures. Given that even current spacecraft heat rejection considerations tend to dominate spacecraft design and mass, the larger and more complex designs of the future face daunting challenges in thermal control. Ceramic fabrics bonded to ultra-thin metal liners (foils) have the potential of achieving radiator performance levels heretofore unattainable, and of readily matching the advances made in other branches of spacecraft design. The research effort documented here indicates that both pumped loops and heat pipes constructed in ceramic fabrics stand to benefit in multiple ways. Flexibility and low mass are the main advantages exhibited by fabric radiators over conventional metal ones. We feel that fabric radiators have intrinsic merits not possessed by any other radiator design and need to be researched further. 26 refs., 16 figs., 17 tabs.

  16. Systems for controlling the intensity variations in a laser beam and for frequency conversion thereof

    DOEpatents

    Skupsky, S.; Craxton, R.S.; Soures, J.

    1990-10-02

    In order to control the intensity of a laser beam so that its intensity varies uniformly and provides uniform illumination of a target, such as a laser fusion target, a broad bandwidth laser pulse is spectrally dispersed spatially so that the frequency components thereof are spread apart. A disperser (grating) provides an output beam which varies spatially in wavelength in at least one direction transverse to the direction of propagation of the beam. Temporal spread (time delay) across the beam is corrected by using a phase delay device (a time delay compensation echelon). The dispersed beam may be amplified with laser amplifiers and frequency converted (doubled, tripled or quadrupled in frequency) with nonlinear optical elements (birefringent crystals). The spectral variation across the beam is compensated by varying the angle of incidence on one of the crystals with respect to the crystal optical axis utilizing a lens which diverges the beam. Another lens after the frequency converter may be used to recollimate the beam. The frequency converted beam is recombined so that portions of different frequency interfere and, unlike interference between waves of the same wavelength, there results an intensity pattern with rapid temporal oscillations which average out rapidly in time thereby producing uniform illumination on target. A distributed phase plate (also known as a random phase mask), through which the spectrally dispersed beam is passed and then focused on a target, is used to provide the interference pattern which becomes nearly modulation free and uniform in intensity in the direction of the spectral variation. 16 figs.

  17. Commercialization effort in support of electroslag-casting technology

    SciTech Connect

    Sikka, V.K.

    1993-06-01

    This report summarizes the results of an effort to revive interest in the electroslag casting (ESC) of components in the United States. The ESC process is an extension of a well established electroslag-remelting (ESR) process. Both processes use the electrode of a material that is continuously melted and cast in a water-cooled copper mold. For simple shapes, the mold can be movable, allowing the continuous casting of long lengths. In an effort to revive US industries` interest in ESC, the following approaches were taken: (1) US industries with prior experience in ESC or currently operating an ESR unit were contacted, followed up with telephone conversation, and/or sent copies of prior published reports on the topic, and, in some cases, personal visits were made; (2) with two companies, a potential interest in ESC was worked out by initially conducting ESR; and (3) to further strengthen the industrial interest, the newly developed iron-aluminide alloy, FA-129, was chosen as the material of choice for this study. The two industrial companies that worked with ORNL were Special Metals Corporation (New Hartford, New York) and Precision Rolled Products, Inc. (PRP) [Florham Park, New Jersey]. Even with its advantages, a survey of the industry indicated that ESC technology has a very limited chance of advancement in the United States. However, the processing of rounds and slabs by the ESR process is a well established commercial technology and will continue to expand. 16 figs, 3 tabs, 12 refs.

  18. Dworshak Reservoir Investigations: Trout, Bass and Forage Species, 1988 Annual Report.

    SciTech Connect

    Statler, David P.

    1989-07-01

    For the period March 1988 through February 1989, an estimated 154,558 angler-hours were expended to catch 20,037 rainbow trout, 3,933 smallmouth bass, and 14 bull trout. Estimated catch of other species, including cutthroat trout, whitefish, suckers, and squawfish totalled 84. Subcatchable rainbow trout (135 to 185mm) caught and released by boat anglers comprised 53% (12,770) of the total catch. An estimated 88.6% of the smallmouth bass caught were under the minimum legal size limit of 305mm and were released. Estimated harvest of smallmouth bass was 450. The highest monthly catch rate documented for all species excluding kokanee was 1.81 fish per hour during October. Severe weather conditions during February reduced effort and no fish were documented in the creel. Cumulative catch rates through the survey period for rainbow trout and smallmouth bass were .13 and .02, respectively. The lowest monthly catch rates generally occurred when fishing pressure was the highest, with fishing effort targeting on kokanee during the May through July high use periods. The Arlee strain rainbow trout was somewhat more vulnerable to boat anglers than the Shasta strain during the early post-release period. 20 refs., 16 figs., 12 tabs.

  19. Tropical waves in a GCM with zonal symmetry

    SciTech Connect

    Yip, K.J.J.; North, G.R. )

    1993-09-01

    Tropical wave phenomena have been examined in the last 520 days of two 15-year runs of a low-resolution general circulation model (CCMO). The model boundary conditions were simplified to all-land, perpetual equinox, and no topography. The two runs were for fixed soil moisture at 75% and 0%, the so-called [open quotes]wet[close quotes] and [open quotes]dry[close quotes] models. Both models develop well-defined ITCZs with low-level convergence erratically concentrated along the equator. Highly organized eastward-propagating waves are detectable in both models with different wave speeds depending on the presence of moisture. The wave amplitudes (in, e.g., vertical velocity) are many orders of magnitude stronger in the wet model. The waves have a definite transverse nature as precipitation (low-level convergence) patches tend to move systematically north and south across the equator. In the wet model the waves are distinctly nondispersive and the transit time for passage around the earth is about 50 days, consistent with the Madden-Julian frequency. The authors are also able to see most of the expected linear wave modes in spectral density plots in the frequency-wavenumber plane and compare them for the wet and dry cases. 28 refs., 16 figs.

  20. New industrial heat pump applications to ethanol production

    SciTech Connect

    Not Available

    1990-04-01

    An energy cost reduction study of the Midwest Grain Products, Atchison, Kansas Beverage grade alcohol (from grain) and speciality starch plant has been completed. The objective was to find out effective energy cost reduction projects and to develop a coherent strategy for realizing the savings. There are many possible options for reducing energy cost. To facilitate a fair comparison of the options, Pinch Technology was used to identify appropriate heat recovery, heat pumping and cogeneration options. Of particular interest were the opportunities for utilizing heat pumps, for energy cost reduction or other profit increasing uses. Therefore, where a heat pumping scheme was identified, its merits relative to other potential projects was carefully evaluated to ensure that the heat pump was technically and economically sound. It is felt that the results obtained in this study are applicable to other alcohol plants, due to the similarity of processes throughout the industry. This study and others indicate that reductions in thermal energy consumption of 10--30% can be expected through increased heat recovery. Additional energy cost reductions can be achieved through the use of MVR evaporators and other heat pump systems. 16 figs., 3 tabs.