Science.gov

Sample records for 17fig 18fig 19fig

  1. Presidential Address: The Woman in the Case Jane Todd Crawford, 1763-1842

    PubMed Central

    Sparkman, Robert S.

    1979-01-01

    The 1978 Presidential Address of the Southern Surgical Association is dedicated to the wives of the members, past and present, in acknowledgment and appreciation of the enduring contribution that they have made to the quality and character of this association. ImagesFig. 1.Fig. 3.Fig. 4.Fig. 5.Fig. 7.Fig. 8.Fig. 9.Fig. 10.Fig. 11.Fig. 12.Fig. 13.Fig. 14.Fig. 15.Fig. 16.Fig. 17.Fig. 18.Fig. 19.Fig. 20. PMID:375854

  2. An ultrastructural study of the cere of the domestic pigeon (Columba livia).

    PubMed Central

    Purton, M D

    1988-01-01

    The relative scarcity of primary and secondary skin infections in birds depends, at least in part, on the functional morphological barrier presented by the avian integument. Both transmission and scanning electron microscopical techniques were used to study the ultrastructural morphology of the epidermal barrier in the cere of the domestic racing pigeon. The epidermis is composed of sebokeratocytes which are responsible for producing not only the keratin proteins of the keratinized stratum corneum, but also the lipid emulsion forming the surface lipid layer and filling the intercellular spaces. The possible importance and role of these components in the defensive barrier presented by the skin is discussed. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 PMID:3198483

  3. Objectivity in the classification of tumours of the nasal epithelium

    PubMed Central

    Michaels, L.; Hyams, V. J.

    1975-01-01

    A survey of tumours derived from each of the four cell types of nasal epithelium is presented. Criticism is levelled at the adoption of additional terms for tissue types such as lympho-epithelium and transitional cell epithelium and tumours said to be derived from them. Electron microscopy is of assistance in classification particularly in the detection of evidence of keratin synthesis. The proposed classification of tumours of the nasal epithelium is: (1) Pseudostratified columnar epithelium: (a) papillary adenoma, (b) papillary carcinoma. (2) Squamous epithelium: (a) everted squamous papilloma, (b) inverted papilloma, (c) squamous carcinoma of any grade of differentiation from well differentiated to undifferentiated. (3) Melanocyte: malignant melanoma. (4) Olfactory neuroepithelium: olfactory neuroblastoma. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 21Fig. 20 PMID:1197175

  4. Electron Microscopy of the Cell

    PubMed Central

    Leeson, T. S.

    1965-01-01

    The use of the electron microscope has added much to our knowledge of the cell. The fine structure of the component parts of the nucleus and the cytoplasm is described, and their functions are indicated. The nature and structural modifications of the plasma membrane are illustrated with particular reference to function. To illustrate the interrelationships of the nucleus and cytoplasm, the theory of protein secretion is discussed, the secretion of a particular protein or polypeptide being determined by a particular nucleotide sequence in the desoxyribonucleic acid of a chromosome, that is, by a gene. This information is transferred from nucleus to cytoplasm. It is in the cytoplasm that the majority of the work is performed while the nucleus directs the work of the cell. ImagesFig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 23Fig. 24Fig. 25Fig. 26 PMID:5829410

  5. Conservative surgical treatment of reflux esophagitis and esophageal stricture.

    PubMed Central

    Herrington, J L; Wright, R S; Edwards, W H; Sawyers, J L

    1975-01-01

    During a recent 3-year period, 17 consecutive patients were seen with advanced fibrotic esophageal strictures secondary to alkaline-acid-pepsin reflux. From detailed preoperative evaluations alone it was impossible to determine whether therapy should consist of excisional surgery, esophagogastroplasty or intra-operative dilatation with correction of reflux. Only at operation could the length, extent, degree and severity of the stricture be fully determined. Each of the 17 patients was treated by controlled dilatation, coupled with an antireflux procedure. This simplified approach proved successful on strictures thought preoperatively to be undilatable. It appears that this conservative approach is applicable to many advanced strictures and excisional and plastic procedures should be reserved for those cases that prove unyielding to intraoperative dilatation. The true appraisal of a reflux stricture and the choice of surgical procedure is best determined at the operating table. Images Fig. 5A. Fig. 5B. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10. Fig. 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 17. Fig. 18. Fig. 19. Fig. 20. Fig. 21. PMID:1130874

  6. The fine structure of proliferating cartilage cells: structural changes in an experimental model.

    PubMed Central

    Scheck, M; Parker, J; Sakovich, L

    1975-01-01

    Extensive development of the rough endoplasmic reticulum and comparatively less developed Golgi membranes were seen in the cells of chondrocyte clusters which had formed in the vicinity of cartilage defects produced by intra-articular papain and cortisone injections. These cells frequently showed myelin-like membranous figures. These figures were seen either close to the cell membrane, or between cells, or connected to the nuclear envelope or the endoplasmic reticulum. The hypothesis is advanced that the myelin figures are made from redundant material which was not used for membrane formation. Cortisone, which is known to interfere with mitochondrial function and general metabolic processes, could have been responsible for the deficiency in membrane differentiation and transfer. This investigation was supported by grants from the Orthopaedic Research and Education Foundation and from the Research Evaluation and Allocation Committee of the School of Medicine, Univeristy of California, San Francisco. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Figs. 7, 8 and 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Figs. 16 and 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 PMID:1141047

  7. New surgical concepts resulting from cranio-orbito-facial surgery.

    PubMed Central

    Edgerton, M T; Jane, J A; Berry, F A; Marshall, K A

    1975-01-01

    The authors have defined the subspecialty of craniofacial surgery and described the organization of the multi-disciplinary team required to care for such patients. Common features of the craniofacial patient have been summarized and three major categories of patients have been proposed. These are: I. Syndromes associated with hypertelorism; II. Syndromes associated with premature synostoses or growth arrests; III. Syndromes associated with primarily mid- and lower face anomalies. Growing out of an experience with 242 operations on 106 patients, the authors have listed 9 relatively new surgical "principles." Each has led to a current surgical approach that is now being employed by the craniofacial team at The University of Virginia. A number of examples are given to show ways in which the lessons learned from the craniofacial patients are now being applied, with improved results, to patients with neoplasms, traumatic injuries, or other conditions. Images Fig. 1. Fig. 2. Fig. 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10. Fig. 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 17. Fig. 18. Fig. 19. Fig. 20. Fig. 21. Fig. 22. PMID:1099994

  8. Colour thresholding in video imaging.

    PubMed Central

    Fermin, C D; Degraw, S

    1995-01-01

    The basic aspects of video imaging are reviewed as they relate to measurements of histological and anatomical features, with particular emphasis on the advantages and disadvantages of colour and black-and-white imaging modes. In black-and-white imaging, calculations are based on the manipulation of picture elements (pixels) that contain 0-255 levels of information. Black is represented by the absence of light (0) and white by 255 grades of light. In colour imaging, the pixels contain variation of hues for the primary (red, green and blue) and secondary (magenta, yellow, cyan, pink) colours. Manipulation of pixels with colour information is more computer intense than that for black-and-white pixels, because there are over 16 million possible combinations of colour in a system with a 24-bit resolution. The narrow 128 possible grades of separation in black and white often makes distinction between pixels with overlapping intensities difficult. Such difficulty is greatly reduced by colour thresholding of systems that base the representation of colour on a combination of hue-saturation-intensity (HSI) format. Images Fig. 3 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 PMID:7559121

  9. Encrustation and Atherosclerosis: The Analogy Between Early in Vivo Lesions and Deposits Which Occur in Extracorporeal Circulations

    PubMed Central

    Murphy, E. A.; Rowsell, H. C.; Downie, H. G.; Robinson, G. A.; Mustard, J. F.

    1962-01-01

    A study was made of the relation between the pattern and topography of thrombus formation in models of various vessel configurations coupled into extracorporeal shunts in swine and the development of atherosclerosis at corresponding sites on swine aortas. The pattern and distribution of deposits formed in the models were strikingly similar to the pattern and distribution of incipient atherosclerosis at comparable sites in the vascular tree. The earliest and only consistent component of the flow chamber deposits was the blood platelet. The platelet deposits would frequently stain with oil red O. The cholesterol level of washed human platelets was found to show a good correlation with that in the plasma. This evidence suggests that deposition of particulate matter (chiefly platelets), largely determined by the hydraulic factors, may be an important factor in the early, as well as later, stages of atherosclerosis. ImagesFigs. 10a and bFig. 13Fig. 21Fig. 1Fig. 3Figs. 4a and bFig. 5Fig. 6aFig. 6bFig. 7Fig. 8Fig. 9Fig. 11Fig. 12Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20 PMID:14477412

  10. Variability of dermal elastin visualized ultrastructurally with iron hematoxylin.

    PubMed Central

    Spicer, S. S.; Brissie, R. M.; Thompson, N. T.

    1975-01-01

    The Verhoeff iron hematoxylin-lead citrate (VIH-LC) method demonstrated vertical elastic fibers that were often composed only of microfibrillar component extending into the epidermal basement membrane in human skin. These fibers connected with a network of trabeculae composed of microfibrils and elastin fibrils in varying proportions. The large elastic fibers in the deep two thirds of the dermis consited mainly of compact bundles of small elstin fibrils in infants and of solid elastin cores with a fimbriated periphery in adults; Dermis of a 6-month-old fetus contained very few small elastic fibrils except around blood vessels. Skin of an elderly subject revealed exteme proliferation of unusual reticulated elastic fibers in various areas and disclosed abnormal nodules of elastin or collagen fibrils in finely particulate matter. Small elastin fibrils, abundant microfibrils, and intermixed individual collagen fibrils comprised an adventitial collar between sweat glands and fibroblasts. Elastin fibrils were absent from this collar in the fetus and increased with the subject's age. A permanganate-high iron diamine sequence appeared to impart density to the microfibrillar component of elastic fibers. Images Figs 6-7 Fig 8 Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 Fig 14 Fig 15 Fig 16 Fig 17 Fig 18 Fig 19 Fig 20 Fig 21 Fig 22 Fig 23 Fig 24 Fig 25 Fig 26 Fig 27 Fig 1 Fig 2 Figs 3-5 Fig 28 Fig 29 Fig 30 Fig 31 Fig 32 Fig 33 PMID:49149

  11. The extent of the odontoblast process in the cat.

    PubMed Central

    Holland, G R

    1976-01-01

    Earlier work has shown that in the dentine of cats perfused with aldehyde fixatives for short periods the odontoblast process seems to be limited to inner dentine. This could possibly have been an artefact due either to inadequate penetration of the fixative or shrinkage of the cells. Experiments prolonging the duration of the fixation and raising the concentration of the fixatives, examining dentine from regions and species where it is narrow and more accessible to fixatives, and looking at dentine fixed by immersion both in situ and after excision, all showed the process to be limited to inner dentine. Measruing glutaraldehyde penetration through model dentine and also through dentine in the perfused animal showed that this fixative penetrates the dentine well. Variations in fixative osmotic pressure, while having a profound effect on cells and processes in vitro and causing changes in cell shape in the intact animal, do not neasurably alter the extent of the odontoblast process. The conclusion is that the odontoblast process in the cat is limited to the pulpal half of the dentine. As a consequence, no cellular mechanism can be involved in the transmission of stimuli across the outer dentine. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 PMID:815232

  12. Pediatric osteomyelitis and septic arthritis: the pathology of neonatal disease.

    PubMed Central

    Ogden, J. A.

    1979-01-01

    The morphologic and histologic examination of over fifty-five foci of metaphyseal/epiphyseal osteomyelitis and eleven septic joints from five cases of neonatal osteomyelitis and joint sepsis are described in detail. The severity of the bone and joint involvement varied considerably, allowing a better understanding of the pathophysiologic sequence of events in the disease in the neonatal time period. Of particular importance were (1) the multifocal nature of the disease, (2) the highly variable destruction of the growth plate (physis) by several discrete mechanisms, and (3) the invasion of the chondroepiphysis through the cartilage canal systems. Two of the cases died from respiratory complications several months following presumed successful treatment of their skeletal infections. S&pecimens showed significant growth plate damage continuing beyond the neonatal period. These findings support the need for rapid diagnosis and drainage, whenever feasible, to prevent long-term skeletal growth damage. The severity of involvement also should emphasize that this disease, especially in the neonate, is not an innocuous condition, as a recent review suggested. Images FIG. 1 FIG. 2 FIG. 3 FIG. 4 FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 9 FIG. 10 FIG. 11 FIG. 12 FIG. 13 FIG. 14 FIG. 15 FIG. 16 FIG. 17 FIG. 18 FIG. 19 FIG. 20 PMID:524924

  13. The fine structure of initial mineralisation during tooth development in the gummy shark, Mustelus manazo, Elasmobranchia.

    PubMed Central

    Sasagawa, I

    1989-01-01

    In the enameloid matrix a large number of tubular vesicles appeared around the odontoblast processes at the stage of enameloid matrix formation. The tubular vesicles were limited by unit membrane and the membrane often seemed to connect with that of the odontoblast processes. The tubular vesicles probably originated from the odontoblasts. Electron-dense granules were observed in the tubular vesicles before the appearance of crystals and then, in the stage of mineralisation, initial enameloid crystals appeared in each tubular vesicle. Parts of the odontoblast process surrounded small aggregations of tubular vesicles in the unmineralised dentine matrix. There were many multivesicular bodies and lysosomes in the odontoblasts forming the dentine. The odontoblasts probably absorb and break down the tubular vesicles after the beginning of dentinogenesis. Only in the predentine, during the enameloid maturation stage, did a few matrix vesicles appear, but no crystals were found in them. Hence, the initial mineralisation in tooth germs of the shark can be said to be different from that in teleosts. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 PMID:2606790

  14. Structural changes in fluorosed dental enamel of red deer (Cervus elaphus L.) from a region with severe environmental pollution by fluorides.

    PubMed Central

    Kierdorf, U; Kierdorf, H; Sedlacek, F; Fejerskov, O

    1996-01-01

    A macroscopic, microradiographic and scanning electron microscope study was performed on the structure of fluorosed dental enamel in red deer from a fluoride polluted region (North Bohemia, Czech Republic). As was revealed by analysis of mandibular bone fluoride content, the rate of skeletal fluoride accumulation in the fluorotic deer was about 6 times that in controls taken from a region not exposed to excessive fluoride deposition. In all fluorosed mandibles, the 1st molar was consistently less fluorotic than the other permanent teeth. This was related to the fact that crown formation in the M1 takes place prenatally and during the lactation period. Fluorosed teeth exhibited opaque and posteruptively stained enamel, reduction or loss of enamel ridges, moderately to grossly increased wear and, in more severe cases, also enamel surface lesions of partly posteruptive, partly developmental origin. Microradiographically, fluorosed enamel was characterised by subsurface hypomineralisation, interpreted as a result of fluoride interference with the process of enamel maturation. In addition, an accentuation of the incremental pattern due to the occurrence of alternating bands with highly varying mineral content was observed in severely fluorosed teeth, denoting fluoride disturbance during the secretory stage of amelogenesis. A corresponding enhancement of the incremental pattern was also seen in the dentine. The enamel along the more pronounced hypoplasias consisted of stacked, thin layers of crystals arranged in parallel, indicating that the ameloblasts in these locations had lost the distal (prism-forming) portions of their Tomes processes. The findings of the present study indicate that red deer are highly sensitive bioindicators of environmental pollution by fluorides. Images Figs 2-9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 PMID:8655406

  15. Haemopoietic phagocytes in the early differentiating avian retina.

    PubMed Central

    Cuadros, M A; García-Martín, M; Martin, C; Ríos, A

    1991-01-01

    The existence of specialised phagocytic cells is described in regions of the retinal neuroepithelium undergoing intense cell death during early differentiation of the avian embryo retina (2.5-5 days of incubation). These results were obtained using routine techniques for light microscopy, acid phosphatase histochemistry and immunocytochemical staining with antibodies MB-1 and QH-1, both specific for quail endothelial cells and all blood cells except mature erythrocytes. Specialised phagocytes were distinguishable from neuroepithelial cells on the basis of morphological criteria: in the former, the nucleus was not oval in shape and was not oriented perpendicular to basement membrane neuroepithelium. The cytoplasm of the specialised phagocytes was often filled with dead cell fragments. In contrast to neuroepithelial cells, the specialised phagocytes showed acid phosphatase activity and were labelled with both MB-1 and QH-1 antibodies in normal quail embryos and chick----quail yolk sac chimeras. Moreover, some acid phosphatase positive and MB-1/QH-1 positive cells also appeared in the presumptive vitreous body, at the edges of the optic cup and in the surrounding mesenchyme. As the vitreal cells and the specialised phagocytes of the neural retina were immunolabelled in chick----quail yolk sac chimeras, we conclude that they are derived from haemopoietic cells in the yolk sac. Some images suggest that these cells enter the vitreous body from the surrounding mesenchyme and traverse the basement membrane of the neuroepithelium in the optic disc region to give rise to the specialised phagocytes of the retinal neuroepithelium. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 PMID:1769889

  16. The harderian gland of desert rodents: a histological and ultrastructural study.

    PubMed Central

    Djeridane, Y

    1992-01-01

    . Mast cells, plasma cells, macrophages, fenestrated capillaries and unmyelinated nerve endings with clear or dense-cored vesicles are present in the connective tissue. Melanocytes are very numerous in the interstices of the Gerbillidae harderian gland. The gland is surrounded by a collagenous capsule and an outer layer of endothelial cells derived from the orbital venous sinus. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 PMID:1487439

  17. Surgical management of chronic pulmonary embolism.

    PubMed Central

    Chitwood, W R; Lyerly, H K; Sabiston, D C

    1985-01-01

    another was massively obese with severe congestive heart failure and expired in the hospital a week later. In this group of 11 patients, three succumbed and most of the others are currently totally debilitated at rest (NYHA Class IV). Long-term follow-up of the surgically managed patients (1 to 15 years) shows that ten patients improved from NYHA functional Class IV to either I or II, another patient from Class III to Class I, and a final patient was only minimally improved.(ABSTRACT TRUNCATED AT 400 WORDS) Images FIG. 1. FIG. 1. FIG. 4. FIG. 5. FIG. 6. FIG. 10. FIG. 13. FIG. 14. FIG. 15. FIG. 16. FIG. 17. FIG. 18. FIG. 19. FIG. 20. FIG. 21. FIG. 22. FIG. 23. PMID:3966827

  18. The cranial cartilages of teleosts and their classification.

    PubMed Central

    Benjamin, M

    1990-01-01

    The structure and distribution of cartilages has been studied in 45 species from 24 families. The resulting data have been used as a basis for establishing a new classification. A cartilage is regarded as 'cell-rich' if its cells or their lacunae occupy more than half of the tissue volume. Five classes of cell-rich cartilage are recognised (a) hyaline-cell cartilage (common in the lips of bottom-dwelling cyprinids) and its subtypes fibro/hyaline-cell cartilage, elastic/hyaline-cell cartilage and lipo/hyaline-cell cartilage, (b) Schaffer's Zellknorpel, typified by the cartilage in the gill filaments of most teleosts examined, (c) elastic/cell-rich cartilage, such as that which supports the barbels and oral valves of catfish, e.g. Corydoras metae, (d) fibro/cell-rich cartilage, as in the submaxillary meniscus of Sphaerichthys osphromenoides, (e) cell-rich hyaline and (f) matrix-rich hyaline cartilage--both of which are common in the neurocranium and gill arches of most teleosts. The range of cartilages seen, and the predominant cartilage type, is recorded for each species and a list is provided of the tissues that most typify different organs or regions of the head. As a preliminary pointer to developmental relationships between the cartilages, note was taken of gradual transitions between one cartilage and another. It is suggested that hyaline-cell cartilage occupies a key position in teleosts as the most labile of the supporting tissues and is highly characteristic of Cypriniformes. The cartilage that best resembles mammalian hyaline cartilage (matrix-rich hyaline cartilage) has a very conservative distribution in different skeletal elements and the least number of associations with other tissues. It is well represented in Siluriformes. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 24 Fig. 25 Fig. 26 Fig. 27 PMID:2384333

  19. The harderian gland: a tercentennial review.

    PubMed Central

    Payne, A P

    1994-01-01

    The harderian gland was first described in 1694 by Johann Jacob Harder (1656-1711). It occurs in most terrestrial vertebrates and is located within the orbit where, in some species, it is the largest structure. It may be compound tubular or compound tubuloalveolar, and its secretory duct is usually morphologically distinct only after leaving the substance of the gland to open on the surface of the nictitating membrane. The tubules of the gland are formed of a single layer of columnar epithelial cells surrounded by myoepithelial cells. The chief product(s) of the gland varies between different groups of vertebrates, and epithelial cells possess granules or vacuoles whose contents may be mucous, serous or lipid. In rodents, the gland synthesises lipids, porphyrins and indoles. In the case of lipid vacuoles, the gland is unusual in releasing these by an exocytotic mechanism. It is unclear whether the gland can act both as an exocrine and endocrine organ. There is control of gland structure and synthesis through a variety of humoral agents, including gonadal, thyroid and pituitary hormones; in addition there is a rich autonomic innervation and many neuropeptides have been identified. The proposed functions of the gland are remarkably diverse and include the gland being (1) a source of 'saliva', (2) a site of immune response, (3) a photoprotective organ, (4) part of a retinal-pineal axis, (5) a source of pheromones, (6) a source of thermoregulatory lipids, (7) a site of osmoregulation, and (8) a source of growth factors. The gland is discussed in terms of its embryology and phylogeny, and in relation to ecological variables. Several goals of future research are identified. Images Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 36 Fig. 37 Fig. 38 Fig. 40 PMID:7559104

  20. Morphological and functional interrelationships of articular cartilage matrices.

    PubMed Central

    Poole, C A; Flint, M H; Beaumont, B W

    1984-01-01

    synergistically to produce an integrated, biological, hydro-elastic suspension system capable of resisting physiological compression. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 PMID:6706831

  1. Endemic syphilis in the Bakwena Reserve of the Bechuanaland Protectorate

    PubMed Central

    Murray, J. F.; Merriweather, A. M.; Freedman, M. L.

    1956-01-01

    A form of endemic syphilis exists in the Bakwena Reserve of the Bechuanaland Protectorate known by the local name of “dichuchwa”. It is similar to bejel, njovera and the endemic syphilis reported elsewhere in the world. The Government of the Protectorate, with the assistance of WHO and UNICEF, began in November 1953 a mass campaign in the Reserve to control this disease and, at the same time, to study its epidemiological, clinical, social and therapeutic aspects. The seropositivity rate in the Reserve was found to be 37%. Dichuchwa is a childhood and family disease, usually spread non-venereally. The early lesions are similar to secondary lesions of sporadic venereal syphilis, and are often followed by tertiary lesions affecting mainly the skin, nasopharynx and long bones. Primary lesions are rare but may occur under certain epidemiological conditions if the inoculum is sufficiently large; thus a mother may develop primary sores on the nipples through suckling an infected infant. Lesions of the cardiovascular and central nervous systems and congenital syphilis are also rare. Superinfection of an already infected and allergic host is probably the chief reason for the frequency of the tertiary lesions. Treatment of the disease with penicillin is very effective, and the authors believe that mass treatment of cases and contacts combined with an improvement in the standards of hygiene could eradicate the disease. ImagesFig. 61Fig. 62Fig. 63Fig. 64Fig. 74Fig. 75Fig. 76Fig. 1Fig. 2Fig. 3Fig. 16Fig. 17Fig. 18Fig. 43Fig. 44Fig. 45Fig. 7Fig. 8Fig. 9Fig. 13Fig. 14Fig. 15Fig. 31Fig. 32Fig. 33Fig. 50Fig. 51Fig. 52Fig. 53Fig. 54Fig. 55Fig. 56Fig. 34Fig. 35Fig. 36Fig. 46Fig. 47Fig. 48Fig. 49Fig. 22Fig. 23Fig. 24Fig. 10Fig. 11Fig. 12Fig. 57Fig. 58Fig. 59Fig. 60Fig. 65Fig. 66Fig. 67Fig. 19Fig. 20Fig. 21Fig. 4Fig. 5Fig. 6Fig. 68Fig. 69Fig. 70Fig. 71Fig. 72Fig. 73Fig. 37Fig. 38Fig. 39Fig. 28Fig. 29Fig. 30Fig. 25Fig. 26Fig. 27Fig. 40Fig. 41Fig. 42 PMID:13404470

  2. Pacesetters of the American image or (a case for a pleasant diversion).

    PubMed Central

    Hook, E. W.

    1992-01-01

    Regardless of how you resolve the morality of our history, the fact is that Currier and Ives documented in their own special and often biased way the iconography of the growth and development of the United States of America (Fig. 88) in some of the most eventful years of its history from about 1840 through 1895. Now, as we near our 500th anniversary commemoration of Columbus' voyage to the Americas, it seems especially appropriate to review--to think about all of this. I think you have sensed, as we have gone along, that learning about Currier and his colleagues--these pacesetters of the American Image--has meant, as Osler predicted, a pleasant diversion for me. These activities have carried me into new areas of interest, expanding my perspective of the American Image--of people, of medicine, of life in general, and aiding in the identification of values, my own, as well as those of others. All along, my knowledge has been enhanced, especially of the history of this wonderful complex country of ours. Furthermore, and of considerable importance, this endeavor has sharpened my power of observation. I have, like a good doctor should do, learned to look better! Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 19 Fig. 18 Fig. 20 Fig. 21 Fig. 23 Fig. 25 Fig. 27 Fig. 26 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 Fig. 36 Fig. 37 Fig. 39 Fig. 40 Fig. 41 Fig. 42 Fig. 43 Fig. 44 Fig. 45 Fig. 46 Fig. 47 Fig. 48 Fig. 49 Fig. 50 Fig. 51 Fig. 52 Fig. 53 Fig. 54 Fig. 55 Fig. 56 Fig. 57 Fig. 58 Fig. 59 Fig. 60 Fig. 61 Fig. 62 Fig. 63 Fig. 64 Fig. 65 Fig. 66 Fig. 68 Fig. 67 Fig. 69 Fig. 70 Fig. 71 Fig. 72 Fig. 73 Fig. 74 Fig. 75 Fig. 76 Fig. 77 Fig. 78 Fig. 79 Fig. 80 Fig. 82 Fig. 81 Fig. 83 Fig. 84 Fig. 85 Fig. 86 Fig. 87 Fig. 88 PMID:1413369

  3. The respiratory epithelium of the lung in the green turtle (Chelonia mydas L.).

    PubMed Central

    Solomon, S E; Purton, M

    1984-01-01

    The chelonian lung exhibits reptilian, mammalian and avian features. The respiratory epithelium is typically vertebrate, i.e. pseudostratified columnar with cilia; gaseous exchange areas appear at all levels from the respiratory bronchi down to the alveoli. The latter are invested with a capillary network and both type I and type II cells are present. The possible functional significance of the distribution of collagen, elastic tissue, cartilage and smooth muscle is discussed. Images Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:6490523

  4. The Reflexes of the Fundus Oculi

    PubMed Central

    Ballantyne, A. J.

    1940-01-01

    fragmented” surface reflexes, or as evidence of the presence of some highly refractile substance, such as cholesterin or calcium carbonate, in a retinal exudate or other lesion. It is characteristic of the pathological reflexes that they come and go and change their character according to the progress of the pathological condition. The linear reflexes in particular may change from one from to another, and may be finally transformed into surface reflexes of physiological character. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 23Fig. 24Fig. 25Fig. 26 PMID:19992307

  5. The Treatment of the Incompletely Descended Testis

    PubMed Central

    Wilson, D. S. Poole

    1939-01-01

    (1) Under three years of age the diagnosis of the incompletely descended testis is uncertain. (2) The policy of awaiting spontaneous descent may be pursued until 10 years of age but, unless the testis lies in the superior scrotal position, this policy should not be persisted in thereafter. (3) Hormonal therapy may be employed before operative treatment as a means of determining testes which will descend spontaneously. It should only be used in the prepuberty period. (4) Operative treatment may be safely carried out at any age after 3 years and should be completed before puberty. The optimum period is between 8 and 11 years. The Bevan operation may be successful when the testis is very mobile but the most consistent results are obtained by the septal transposition or Keetley-Torek operations. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 8Fig. 9Fig. 10Fig. 13Fig. 14Fig. 15Fig. 16Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22 PMID:19991991

  6. Cryoscanning electron microscopic study of the surface amorphous layer of articular cartilage.

    PubMed Central

    Kobayashi, S; Yonekubo, S; Kurogouchi, Y

    1995-01-01

    In order to elucidate the structure near the articular surface, frozen unfixed hydrated articular cartilage with subchondral bone from the pig knee was examined using a cryoscanning electron microscope (cryo-SEM). This method is considered to reduce the introduction of artefacts due to fixation and drying. An amorphous layer, without a collagen-fibril network or chondrocytes, covered most of the surface of the cartilage. This layer was termed the surface amorphous layer. It showed various appearances, which were classified into 4 groups. The average thickness of the layer did not differ among the 8 anatomical regions from which the specimens were taken. The thickness of the layer was found to correlate with the type of appearance of the layer. The 4 appearances associated with thicknesses in descending order are: 'streaked', 'foliate', 'spotted', and 'vestigial'. The surface layer observed in the cryo-SEM was thicker than that observed by a conventional SEM. This difference may be attributable to dehydration of the specimen used in specimen preparation for the latter technique. The layer was also observed in articular cartilage taken from human and rabbit knees. The layer was found to be unstable and to have very variable features. Its thickness and appearance may be influenced by various factors such as dehydration, fluid absorption or mechanical stress. Images Fig. 1 Fig. 3 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:7592006

  7. Laboratory Design for Microbiological Safety

    PubMed Central

    Phillips, G. Briggs; Runkle, Robert S.

    1967-01-01

    Of the large amount of funds spent each year in this country on construction and remodeling of biomedical research facilities, a significant portion is directed to laboratories handling infectious microorganisms. This paper is intended for the scientific administrators, architects, and engineers concerned with the design of new microbiological facilities. It develops and explains the concept of primary and secondary barriers for the containment of microorganisms. The basic objectives of a microbiological research laboratory, (i) protection of the experimenter and staff, (ii) protection of the surrounding community, and (iii) maintenance of experimental validity, are defined. In the design of a new infectious-disease research laboratory, early identification should be made of the five functional zones of the facility and their relation to each other. The following five zones and design criteria applicable to each are discussed: clean and transition, research area, animal holding and research area, laboratory support, engineering support. The magnitude of equipment and design criteria which are necessary to integrate these five zones into an efficient and safe facility are delineated. Images Fig. 1 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:4961771

  8. The structure and source of lingual proprioceptors in the monkey.

    PubMed Central

    Fitzgerald, M J; Sachithanandan, S R

    1979-01-01

    The proprioceptive innervation of the tounge has been investigated in the Cynamolgus monkey by silver impregnation methods following unilateral section of lingual, hypoglossal, and cervical nerves. Muscle spindles were constantly present in the intrinsic and extrinsic muscles. They varied greatly in number, averaged half the length of lumbrical spindles, and showed an unusual arrangement of chain fibre nuclei. Other, inconstant proprioceptors included tendon endings, Ruffini endings, Pacinian corpuscles, paciniform and lamellated endings. Topologically, the endings other than spindles were extra-muscular, so that the overall pattern of proprioceptive innervation resembled that of skeletal muscle in general. Lingual nerve section was without apparent effect on the proprioceptors. Section of the hypoglossal nerve at its point of entry into the tongue caused severe depletiion of ipsilateral proprioceptors and of fusimotor nerves. In the anterior tongue there was evidence of transmedian overlap by efferent and afferent axons contained in the hypoglossal nerve. Hypoglossal section at the skull base caused degeneration of fusimotor nerves but not of proprioceptors. Section of (a), the connexion of C2-C3 ventral rami with the hypoglossal, together with section of (b), the ramus descendens hypoglossi, coused depletion of lingual proprioceptors; again there was evidence of transmedian overlap. Procedures (a) or (b) alone had a lesser effect. It was concluded that lingual proprioceptive afferent fibres occupy the distal hypoglossal nerve, leaving it in the ramus descendens and in the C2-C3 connexion to enter the spinal cord via nerves C2 and C3. Images Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 17 Figs. 18,20 Fig. 19 Fig. 21 Figs. 22-26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 Fig. 36 Fig. 37 Fig. 38 Fig. 39 PMID:157344

  9. Cell death during the postnatal morphogenesis of the normal rabbit kidney and in experimental renal polycystosis.

    PubMed Central

    García-Porrero, J A; Ojeda, J L; Hurlé, J M

    1978-01-01

    We have studied, by means of optic and electron microscopy, the normal and abnormal cell death that takes place during the postnatal morphogenesis of rabbit kidney, and in the experimental renal polycystosis produced by methylprednisolone acetate. In the normal kidney intertubular cell death can be observed during the first 20 days of the postnatal development. However, cell death in the normal metanephric blastema is a very rare event. In the polycystic kidney numerous dead cells can be seen between the third and forty eighth days after injection. The topography and morphology of the dead cells depend on the stage in the evolution of the disease. In the 'stage of renal immaturity', dying and dead cells are present in the nephrogenic tissue, in the dilating collecting tubules and in the intertubular spaces. In this stage the cellular pathology is essentially nuclear. In the stage of tubular cysts, the dead cells are mostly located in the walls of cysts, with some dead cells, but mostly cellular debris in their lumina. At this stage the cellular pathology is basically cytoplasmic. The dead cells are eventually digested by what appear to be phagocytes of tubular epithelial origin. It is suggested that cell death is an important factor in the evolution of the lesions of renal polycystosis induced by corticosteroids, and probably in the initiation of the pathological process as well. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:670065

  10. An ultrastructural study of the stellate ganglion of the pig-tailed monkey (Macaca nemestrina).

    PubMed Central

    Leong, S K; Wong, W C

    1989-01-01

    The stellate ganglia of Macaca nemestrina were studied with the electron microscope, using the conventional and chromate-dichromate methods of aldehyde fixation. The principal neurons are multipolar and mostly mononucleated. They measure between 10 and 50 microns in their average somal diameters. The organelles of the perikaryon are arranged in perinuclear, intermediate and peripheral zones. Unusual organelles consisting of stacks of closely apposed paired membranes, with or without dense bodies studded on their surfaces, are encountered. Nuclear eccentricity is a regular feature of the neuron and the nuclear membrane shows a varying degree of invagination. All parts of the neurons are surrounded by satellite or Schwann cells though dendritic surfaces in direct contact with the basal lamina associated with the satellite cells are not uncommonly seen. Features peculiar to dendrites have been described. Structures resembling dendritic growth cones are present in abundance. Most synapses are axodendritic; axosomatic synapses are much less frequently encountered. While most synapses are of the simple type, complex types are also present. Desmosome-like junctional complexes exist between dendrites, dendrites and somata and axons and dendrites. Differences between Schwann cells of myelinated axons and those of myelinated axons and satellite cells have been noted. In addition to an abundance of macrophages, other connective tissue cells such as mast cells, fibroblasts and plasma cells are also present. Degenerative profiles observed include neuronal cell bodies and cell processes, especially dendrites. They are phagocytosed by the satellite cells and macrophages. The presence of degenerative profiles, chromatolytic neurons and structures resembling dendritic growth cones in the normal stellate ganglion has been discussed. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Figs. 19

  11. Nuclear Waste Management. Semiannual progress report, October 1984-March 1985

    SciTech Connect

    McElroy, J.L.; Powell, J.A.

    1985-06-01

    Progress reports are presented for the following studies on radioactive waste management: defense waste technology; nuclear waste materials characterization center; and supporting studies. 19 figs., 29 tabs.

  12. Upregulation and induction of surface antigens with special reference to MHC class II expression in microglia in postnatal rat brain following intravenous or intraperitoneal injections of lipopolysaccharide.

    PubMed Central

    Xu, J; Ling, E A

    1994-01-01

    positive cells, it is suggested that the OX-6 positive cells would have the potentiality to function in antigen presentation in the postnatal rat brain when challenged by the endotoxin. Images Fig. 1 Fig. 2 Fig. 3 Figs 4,5 Figs 6,7 Figs 8,9 Figs 10,11 Figs 12,13 Figs 14,15 Figs 16,17 Figs 18,19 Figs 20,21 PMID:8014120

  13. An Experimental Investigation of the Lymphatic System of the Teeth and Jaws

    PubMed Central

    MacGregor, Alexander

    1936-01-01

    are given, and the lines on which further experiments are being continued are indicated. Finally, the application of the results to the pathology of infection in this region, particularly paradontal disease, is given, and also their application to the phenomena of injection anæsthesia. ImagesFig. 18Fig. 19Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17 PMID:19990818

  14. Experimental signatures of localization in Langmuir wave turbulence

    SciTech Connect

    Rose, H.A.; DuBois, D.F.; Russell, D.; Bezzerides, B.

    1988-01-01

    Features in certain laser-plasma and ionospheric experiments are identified with the basic properties of Langmuir wave turbulence. Also, a model of caviton nucleation is presented which leads to certain novel scaling predictions. 12 refs., 19 figs.

  15. Innervation of the human gastric wall.

    PubMed Central

    Kyösola, K; Rechardt, L; Veijola, L; Waris, T; Penttilä, O

    1980-01-01

    separated from the gastric glands (and the parietal cells, chief cells and endocrine cells of their epithelial lining) by a considerable gap so that it seems unlikely that the gastric glands, parietal cells, chief cells and endocrine cells receive a direct innervation in the sense of synaptic neurotransmission; the transmitter substance must diffuse across a wide gap. In contrast, the endocrine cells were in close contact with the parietal cells and chief cells, and occasional membrane specialization (desmosomes) reinforce the assumption that (also) direct local humoral interaction may be possible. In addition, a large number of mast cells was observed in the lamina propria, many lying as close to glandular cells (parietal cells, chief cells and endocrine cells) as were the nearest nerve terminals. Images Fig. 1 Fig. 2 Fig. 3 Figs. 4-6 Figs. 7(a) and 7(b) Figs. 8-9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Figs. 14-15 Fig. 16 Fig. 17 Figs. 18-19 Figs. 20-21 PMID:7216913

  16. Resonance formation in photon-photon collisions

    SciTech Connect

    Gidal, G.

    1988-08-01

    Recent experimental progress on resonance formation in photon-photon collisions is reviewed with particular emphasis on the pseudoscalar and tensor nonents and on the ..gamma gamma..* production of spin-one resonances. 37 refs., 17 figs., 5 tabs.

  17. Report of the subgroup on the top quark

    SciTech Connect

    Barnett, R.M.; Galtieri, A.B.; Hinchliffe, I.; Palounek, A. ); Wacker, K. ); Kauffman, R.; Trost, H.-J.; Yuan, C.-P. ); Klein, S. ); May, H. ); Partridge, R. ); Gunion, J.F. (California Univ., Da

    1990-01-01

    The top group studied discovery issues at the Tevatron as well as measurements to be made at LHC and SSC. Mass measurements, branching ratios, distributions and other issues were studied. 12 refs., 18 figs.

  18. Selective thermal and photooxidation of hydrocarbons in zeolites by oxygen

    DOEpatents

    Frei, H.; Blatter, F.; Sun, H.

    1999-06-22

    A process is described for selective thermal oxidation or photooxidation of hydrocarbons adsorbed onto zeolite matrices. A highly selective thermal oxidation and photooxidation of unsubstituted or alkyl substituted alkanes, alkenes, aromatics and cycloalkyls in solvent free zeolites under dark thermal conditions or under irradiation with visible light. The process oxidizes hydrocarbons almost completely selectively without substantial production of byproducts. 19 figs.

  19. Gallium nitride junction field-effect transistor

    DOEpatents

    Zolper, J.C.; Shul, R.J.

    1999-02-02

    An ion implanted gallium-nitride (GaN) junction field-effect transistor (JFET) and method of making the same are disclosed. Also disclosed are various ion implants, both n- and p-type, together with or without phosphorus co-implantation, in selected III-V semiconductor materials. 19 figs.

  20. Method for synthesizing peptides with saccharide linked enzyme polymer conjugates

    DOEpatents

    Callstrom, M.R.; Bednarski, M.D.; Gruber, P.R.

    1997-06-17

    A method is disclosed for synthesizing peptides using water soluble enzyme polymer conjugates. The method comprises catalyzing the peptide synthesis with enzyme which has been covalently bonded to a polymer through at least three linkers which linkers have three or more hydroxyl groups. The enzyme is conjugated at lysines or arginines. 19 figs.

  1. Enzyme linked immunoassay with stabilized polymer saccharide enzyme conjugates

    DOEpatents

    Callstrom, M.R.; Bednarski, M.D.; Gruber, P.R.

    1997-11-25

    An improvement in enzyme linked immunoassays is disclosed wherein the enzyme is in the form of a water soluble polymer saccharide conjugate which is stable in hostile environments. The conjugate comprises the enzyme which is linked to the polymer at multiple points through saccharide linker groups. 19 figs.

  2. Method for production of petroselinic acid and OMEGA12 hexadecanoic acid in transgenic plants

    DOEpatents

    Ohlrogge, J.B.; Cahoon, E.B.; Shanklin, J.; Somerville, C.R.

    1995-07-04

    The present invention relates to a process for producing lipids containing the fatty acid, petroselinic acid, in plants. The production of petroselinic acid is accomplished by genetically transforming plants which do not normally accumulate petroselinic acid with a gene for a {omega}12 desaturase from another species which does normally accumulate petroselinic acid. 19 figs.

  3. Retrofitted coal-fired firetube boiler and method employed therewith

    DOEpatents

    Wagoner, C.L.; Foote, J.P.

    1995-07-04

    A coal-fired firetube boiler and a method for converting a gas-fired firetube boiler to a coal-fired firetube boiler are disclosed. The converted boiler includes a plurality of combustion zones within the firetube and controlled stoichiometry within the combustion zones. 19 figs.

  4. Renewable energy 1998: Issues and trends

    SciTech Connect

    1999-03-01

    This report presents the following five papers: Renewable electricity purchases: History and recent developments; Transmission pricing issues for electricity generation from renewable resources; Analysis of geothermal heat pump manufacturers survey data; A view of the forest products industry from a wood energy perspective; and Wind energy developments: Incentives in selected countries. A glossary is included. 19 figs., 27 tabs.

  5. Current and potential distributions on a cylinder electrode

    SciTech Connect

    Grabowski, A.J.

    1990-07-01

    This work presents the numerical solution for the current and potential distributions of a cylindrical electrode. In particular, it investigates the primary current distribution, the secondary current distribution with linearized kinetics, and the potential distribution due to constant current density on the working electrode. 16 refs., 19 figs.

  6. Flexible, liquid core light guide with focusing and light shaping attachments

    DOEpatents

    Wojcik, R.F.; Majewski, S.; Zorn, C.J.; Kross, B.

    1999-04-20

    A liquid light guide system for ultraviolet light is disclosed that has a light shaping arrangement for the emitted light, a stable liquid core and sheath and reliable and effective end closures. The end closures include a metal crimping arrangement that utilizes two layers of deformable materials to prevent cracking of endplugs. 19 figs.

  7. Dworshak Reservoir Investigations: Trout, Bass and Forage Species, 1989 Annual Report.

    SciTech Connect

    Statler, David P.

    1990-07-01

    The Nez Perce Tribe and the Idaho Department of Fish and Game (IDFG) entered into separate intergovernmental agreements with the Bonneville Power Administration in a cooperative four-year effort to study impacts of Dworshak Dam operation on resident fisheries. This third annual report focuses on rainbow trout, smallmouth bass, and forage species. 22 refs., 19 figs., 11 tabs.

  8. Promotion effects of titanium on partial oxidation of methanol over vanadium pentoxide catalysts

    SciTech Connect

    Briand, L.; Gambaro, L.; Thomas, H.

    1996-07-01

    EDAX, XRD, FTIR, SEM, BET, TPR, and XPS were used to characterize various formulations of V{sub 2}O{sub 5} coprecipitated with different TiO{sub 2} concentrations. Catalytic activity of these mixed oxides in the partial oxidation of methanol was investigated. 38 refs., 19 figs., 6 tabs.

  9. Atomic power in space: A history

    SciTech Connect

    Not Available

    1987-03-01

    ''Atomic Power in Space,'' a history of the Space Isotope Power Program of the United States, covers the period from the program's inception in the mid-1950s through 1982. Written in non-technical language, the history is addressed to both the general public and those more specialized in nuclear and space technologies. 19 figs., 3 tabs.

  10. Improved assembly processes for the Quartz Digital Accelerometer cantilever

    SciTech Connect

    Romero, A.M.; Gebert, C.T.

    1990-07-01

    This report covers the development of improved assembly processes for the Quartz Digital Accelerometer cantilever. In this report we discuss improved single-assembly tooling, the development of tooling and processes for precision application of polyimide adhesive, the development of the wafer scale assembly procedure, and the application of eutectic bonding to cantilever assembly. 2 refs., 17 figs.

  11. Method for making an electrochemical cell

    DOEpatents

    Tuller, H.L.; Kramer, S.A.; Spears, M.A.; Pal, U.B.

    1996-04-23

    An electrochemical device is described including a solid electrolyte and solid electrode composed of materials having different chemical compositions and characterized by different electrical properties but having the same crystalline phase is provided. A method for fabricating an electrochemical device having a solid electrode and solid electrolyte characterized by the same crystalline phase is provided. 17 figs.

  12. Summary report of research accomplishments

    SciTech Connect

    Munir, Z.A.

    1992-04-01

    Recent work dealing with combustion synthesis of ceramics, metallics, and composites, is summarized. Research was carried out to investigate the mechanism of synthesis in simple (nitrides and silicides, particularly TiN), composite (TiC + NiAl), and solid solutions (TiNC). 17 figs.

  13. The fast simulation of electromagnetic and hadronic showers

    SciTech Connect

    Grindhammer, G.; Rudowicz, M.; Peters, S.; Max-Planck-Institut fuer Physik und Astrophysik, Muenchen . Werner-Heisenberg-Inst. fuer Physik)

    1989-10-01

    A program for the fast simulation of electromagnetic and hadronic showers using parameterizations for the longitudinal and lateral profile is described. The fluctuations and correlations of the parameters are taken into account in a consistent way. Comparisons with data over a wide energy range are made. 15 refs., 17 figs.

  14. Superstring spectroscopy

    SciTech Connect

    Peskin, M.E.

    1986-12-01

    The basic elements of string theory are presented after a brief review of the main properties of string theories, particularly the supersymmetric version. Lessons are provided on the basic quantized string, zero-point energy, the bosonic string, compactification on a torus, the superstring, the heterotic string, field compactification on an orbifold, and string compactification on an orbifold. 35 refs., 17 figs. (LEW)

  15. Smart, passive sun facing surfaces

    DOEpatents

    Hively, L.M.

    1996-04-30

    An article adapted for selectively utilizing solar radiation comprises an absorptive surface and a reflective surface, the absorptive surface and the reflective surface oriented to absorb solar radiation when the sun is in a relatively low position, and to reflect solar radiation when the sun is in a relatively high position. 17 figs.

  16. Commercialization of coal to liquids technology

    SciTech Connect

    2007-07-01

    After an overview of the coal market, technologies for producing liquids from coal are outlined. Commercialisation of coal-to-liquid fuels, the economics of coal-to-liquids development and the role of the government are discussed. Profiles of 8 key players and the profiles of 14 projects are finally given. 17 figs., 8 tabs.

  17. Sealing apparatus for airfoils of gas turbine engines

    DOEpatents

    Jones, R.B.

    1998-05-19

    An improved airfoil tip sealing apparatus is disclosed wherein brush seals are attached to airfoil tips with the distal ends of the brush seal fibers sealingly contacting opposing wall surfaces. Embodiments for variable vanes, stators and both cooled and uncooled turbine blade applications are disclosed. 17 figs.

  18. Acetylenic carbon allotrope

    DOEpatents

    Lagow, R.J.

    1998-02-10

    A fourth allotrope of carbon, an acetylenic carbon allotrope, is described. The acetylenic carbon allotropes of the present invention are more soluble than the other known carbon allotropes in many common organic solvents and possesses other desirable characteristics, e.g. high electron density, ability to burn cleanly, and electrical conductive properties. Many uses for this fourth allotrope are described herein. 17 figs.

  19. Multiple input electrode gap controller

    DOEpatents

    Hysinger, C.L.; Beaman, J.J.; Melgaard, D.K.; Williamson, R.L.

    1999-07-27

    A method and apparatus for controlling vacuum arc remelting (VAR) furnaces by estimation of electrode gap based on a plurality of secondary estimates derived from furnace outputs. The estimation is preferably performed by Kalman filter. Adaptive gain techniques may be employed, as well as detection of process anomalies such as glows. 17 figs.

  20. Electrophoretic detection and separation of mutant DNA using replaceable polymer matrices

    DOEpatents

    Karger, B.L.; Thilly, W.G.; Foret, F.; Khrapko, K.; Koehavong, P.; Cohen, A.S.; Giese, R.W.

    1997-05-27

    The disclosure relates to a method for resolving double-stranded DNA species differing by at least one base pair. Each of the species is characterized by an iso-melting domain with a unique melting temperature contiguous with a melting domain of higher thermal stability. 18 figs.

  1. Charging belt noise in a Van de Graaff accelerator

    SciTech Connect

    Trainor, T.A.

    1988-01-01

    With the aid of a Fast Fourier Transformer (FFT) spectrum analyzer it has been possible to decompose Van de Graaff terminal voltage noise into components that can be related to various properties of the charging belt. One consequence has been the elimination of the fundamental belt frequency component by a novel belt charge transfer device. 18 figs.

  2. Radiological aspects of the SSRL 3 GeV injector

    SciTech Connect

    Ipe, N.

    1991-09-01

    This document describes the shielding of the injector, results of radiation measurements, the personnel protection system, the beam containment system, the area monitoring, administrative controls and procedures, operator training and personnel dosimetry. In addition, other radiological aspects of the injector such as muons, air activation, toxic gases, induced activity and skyshine are discussed. 79 refs., 18 figs., 13 tabs.

  3. RF digital-to-analog converter

    DOEpatents

    Conway, P.H.; Yu, D.U.L.

    1995-02-28

    A digital-to-analog converter is disclosed for producing an RF output signal proportional to a digital input word of N bits from an RF reference input, N being an integer greater or equal to 2. The converter comprises a plurality of power splitters, power combiners and a plurality of mixers or RF switches connected in a predetermined configuration. 18 figs.

  4. Hadron production at PEP/PETRA

    SciTech Connect

    Yamamoto, H.

    1985-12-01

    Recent results on hadron production in e/sup +/e/sup -/ annihilation at PEP and PETRA are summarized. The topics included are: (1) inclusive hadron production, (2) gluon vs quark jet, (3) analysis of 3 jet events and (4) p - anti p correlations. Experimental data are compared with predictions of several models to reveal underlying physics. 47 refs., 18 figs.

  5. Detection of counterfeit currency

    DOEpatents

    Burns, D.A.

    1998-05-26

    A method is disclosed of detecting counterfeit currency by contacting the currency to be tested with near infrared beams in the spectrum below 1,250 nanometers, measuring reflectance of the near infrared beams and comparing the reflectance values with those from genuine currency. 18 figs.

  6. Method and apparatus for detecting flaws in conductive material

    DOEpatents

    Hockey, R.L.; Riechers, D.M.

    1998-07-07

    The present invention uses a magnet in relative motion to a conductive material, and a coil that is stationary with respect to the magnet to measure perturbation or variation in the magnetic field in the presence of an inclusion. The magnet and coil sensor may be on the same side of the conductive material. 18 figs.

  7. Sheathed thermocouples for continuous molten steel temperature measurement during the ladle treatment process

    SciTech Connect

    Phillippi, R.M. . Accumetrix Div.)

    1989-09-01

    The evolution of a thermocouple protection sheath for use in liquid steel during the ladle treatment process is described. Five different designs constructed of boron nitride, alumina-graphite, and magnesia-graphite were evaluated. Results show that excellent slag wear characteristics are possible using magnesia-graphite but improvements in thermal shock resistance and response time are required. Temperature profiles during argon stirring, addition of chill scrap, and natural cooling are presented. 3 refs., 19 figs.

  8. Kinetic extruder - a dry pulverized solid material pump

    DOEpatents

    Meyer, J. W.; Bonin, J. H.; Daniel, A. D. Jr.

    1983-03-15

    Method and apparatus are shown for the continuous feeding of pulverized material to a high pressure container. A rotor is located within the high pressure container. The pulverized material is fed from a feed hopper through a stationary feed pipe to a vented spin-up chamber to a plurality of two-stage sprues mounted in the rotor. Control nozzles downstream from the sprues meter the flow of coal through the sprues. 19 figs.

  9. Nanocrystalline ceramic materials

    DOEpatents

    Siegel, R.W.; Nieman, G.W.; Weertman, J.R.

    1994-06-14

    A method is disclosed for preparing a treated nanocrystalline metallic material. The method of preparation includes providing a starting nanocrystalline metallic material with a grain size less than about 35 nm, compacting the starting nanocrystalline metallic material in an inert atmosphere and annealing the compacted metallic material at a temperature less than about one-half the melting point of the metallic material. 19 figs.

  10. Method of chaotic mixing and improved stirred tank reactors

    DOEpatents

    Muzzio, F.J.; Lamberto, D.J.

    1999-07-13

    The invention provides a method and apparatus for efficiently achieving a homogeneous mixture of fluid components by introducing said components having a Reynolds number of between about [le]1 to about 500 into a vessel and continuously perturbing the mixing flow by altering the flow speed and mixing time until homogeneity is reached. This method prevents the components from aggregating into non-homogeneous segregated regions within said vessel during mixing and substantially reduces the time the admixed components reach homogeneity. 19 figs.

  11. Laminated electromagnetic pump stator core

    DOEpatents

    Fanning, A.W.

    1995-08-08

    A stator core for an electromagnetic pump includes a plurality of circumferentially abutting tapered laminations extending radially outwardly from a centerline axis to collectively define a radially inner bore and a radially outer circumference. Each of the laminations includes radially inner and outer edges and has a thickness increasing from the inner edge toward the outer edge to provide a substantially continuous path adjacent the circumference. This pump is used in nuclear fission reactors. 19 figs.

  12. 1987 calibration of the TFTR neutron spectrometers

    SciTech Connect

    Barnes, C.W.; Strachan, J.D.; Princeton Univ., NJ . Plasma Physics Lab.)

    1989-12-01

    The {sup 3}He neutron spectrometer used for measuring ion temperatures and the NE213 proton recoil spectrometer used for triton burnup measurements were absolutely calibrated with DT and DD neutron generators placed inside the TFTR vacuum vessel. The details of the detector response and calibration are presented. Comparisons are made to the neutron source strengths measured from other calibrated systems. 23 refs., 19 figs., 6 tabs.

  13. Complex fragment emission from hot compound nuclei

    SciTech Connect

    Moretto, L.G.

    1986-03-01

    The experimental evidence for compound nucleus emission of complex fragments at low energies is used to interpret the emission of the same fragments at higher energies. The resulting experimental picture is that of highly excited compound nuclei formed in incomplete fusion processes which decay statistically. In particular, complex fragments appear to be produced mostly through compound nucleus decay. In the appendix a geometric-kinematic theory for incomplete fusion and the associated momentum transfer is outlined. 10 refs., 19 figs.

  14. Ground-water monitoring compliance plan for the Hanford Site Solid Waste Landfill

    SciTech Connect

    Fruland, R.M.

    1986-10-01

    Washington state regulations required that solid waste landfill facilities have ground-water monitoring programs in place by May 27, 1987. This document describes the well locations, installation, characterization studies and sampling and analysis plan to be followed in implementing the ground-water monitoring program at the Hanford Site Solid Waste Landfill (SWL). It is based on Washington Administrative Code WAC 173-304-490. 11 refs., 19 figs., 4 tabs.

  15. Characterization of reference Umtanum and Cohassett basalt

    SciTech Connect

    Allen, C.C.; Johnston, R.G.; Strope, M.B.

    1985-02-01

    The Basalt Waste Isolation Project (BWIP) Materials Testing Group (MTG) provides large quantities of reference basalt for testing waste package materials under repository conditions, site sorption characteristics and other experimental purposes. This document describes the reference rock materials currently used in testing, namely entablature and colonnade basalt from the Umtanum and Cohassett flows. The data include sampling locations, bulk chemical composition, modal percentages of major phases, and the chemical and mineralogical compositions of these phases. 8 refs., 17 figs., 15 tabs.

  16. Organosiloxane-grafted natural polymer coatings

    DOEpatents

    Sugama, Toshifumi

    1998-12-01

    A new family of polysaccharide graft polymers are provided as corrosion resistant coatings having antimicrobial properties which are useful on light metals such as aluminum, magnesium, zinc, steel and their alloys. Methods of making the polysaccharide graft polymers are also included. The methods of making the polysaccharide graft polymers involve reacting a polysaccharide source with an antimicrobial agent under conditions of hydrolysis-condensation. 17 figs.

  17. An investigation of the mechanisms of calcination and sulfation in coal-water mixtures

    SciTech Connect

    Christofides, N.

    1990-09-21

    The purpose of this investigation is to study the mechanisms of sulfur capture when burning coal-water-limestone mixtures (CWLM) in fluidized beds. Special care is taken to make comparisons with to dry coal and sorbent under comparable experimental conditions. A series of experiments were performed in an eight-inch diameter bubbling fluidized bed combustor to address this problem. 33 refs., 17 figs., 5 tabs.

  18. Yakima/Klickitat Natural Production and Enhancement Program : Annual Report FY 1989.

    SciTech Connect

    Fast, David E.; Hubble, Joel D.; Schribner, Thomas B.

    1989-12-01

    The purpose of this study is to develop and implement a detailed and comprehensive program for monitoring status and productivity of salmon and steelhead in the Yakima/Klickitat Basins. The procedures will cover all phases in the data gathering process from field work to computer retrievable data files. Sampling locations, sample size, sampling frequencies and methods will be described whenever specific information is available. 9 refs., 18 figs., 8 tabs.

  19. Central ignition scenarios for TFTR

    SciTech Connect

    Zweben, S.J.; Redi, M.H.; Bateman, G.

    1986-03-01

    The possibility of obtaining ignition in TFTR by means of very centrally peaked density profiles is examined. It is shown that local central alpha heating can be made to exceed local central energy losses (''central ignition'') under global conditions for which Q greater than or equal to 1. Time dependent 1-D transport simulations show that the normal global ignition requirements are substantially relaxed for plasmas with peaked density profiles. 18 refs., 18 figs.

  20. Willapa Bay: A historical perspective and a rationale for research

    SciTech Connect

    Hedgpeth, J.W. , Santa Rosa, CA ); Obrebski, S. )

    1981-04-01

    This report provides a historical perspective of a Pacific coast estuarine system -- Willapa Bay. The intent of the report is to stimulate estuarine research in an area which is relatively undisturbed. Of particular interest is the importance or value of marshes, tideflats, and eelgrass beds to estuarine fisheries and waterfowl. The research findings as determined for Willapa Bay could be applied to other Pacific Northwest estuaries for coastal problems and decisionmaking. 61 refs., 18 figs., 5 tabs.

  1. Extended gauge sectors at future colliders: Report of the New Gauge Boson Subgroup

    SciTech Connect

    Rizzo, T.G.

    1996-12-01

    The author summarizes the results of the New Gauge Boson Subgroup on the physics of extended gauge sectors at future colliders as presented at the 1996 Snowmass workshop. He discusses the direct and indirect search reaches for new gauge bosons at both hadron and lepton colliders as well as the ability of such machines to extract detailed information on the couplings of these particles to the fermions and gauge bosons of the Standard Model. 41 refs., 18 figs., 5 tabs.

  2. Index of granitic rock masses in the state of Nevada; A compilation of data on 205 areas of exposed granitic rock masses in Nevada

    SciTech Connect

    1988-12-31

    The compilation of 205 areas of exposed granitic rock in Nevada was undertaken for the US Department of Energy. The purpose was to obtain data for evaluating granitic rock masses as potential underground nuclear waste repositories. Information, compiled by county for areas of granitic rock exposure, includes general location, coordinates, land classification, areal extent, accessibility, composition, age, rocks intruded, aeromagnetic expression, mining activity, and selected references. 49 refs., 18 figs., 3 tabs.

  3. Hanford radiological protection support services annual report for 1989

    SciTech Connect

    Lyon, M.; Bihl, D.E.; Fix, J.J.; Kenoyer, J.L.; Leonowich, J.A.; Palmer, H.E.

    1990-07-01

    Certain sitewide radiation protection services operated by Pacific Northwest Laboratory for the US Department of Energy-Richland Operations office and Hanford contractor are documented in this annual report on these services provided during calendar year 1989. These activities include internal dosimetry, in vivo measurements, external dosimetry, instrument calibration and evaluation, radiation source calibration, and radiological records keeping. In each case the routine program, program changes, associated tasks, investigations, and studies, as well as related publications, presentations, and other professional activities are discussed as applicable. 26 refs., 19 figs., 18 tabs.

  4. Data embedding

    DOEpatents

    Sandford, M.T. II; Handel, T.G.

    1997-08-19

    A method is disclosed for embedding auxiliary information into a set of host data, such as a photograph, television signal, facsimile transmission, or identification card. All such host data contain intrinsic noise, allowing pixels in the host data which are nearly identical and which have values differing by less than the noise value to be manipulated and replaced with auxiliary data. As the embedding method does not change the elemental values of the host data, the auxiliary data do not noticeably affect the appearance or interpretation of the host data. By a substantially reverse process, the embedded auxiliary data can be retrieved easily by an authorized user. 19 figs.

  5. Report of the committee to review the use of J-13 well water in Nevada Nuclear Waste Storage Investigations

    SciTech Connect

    Harrar, J.E.; Carley, J.F.; Isherwood, W.F.; Raber, E.

    1990-01-01

    The Waste Management Project Office of the Department of Energy conducted a special audit of the activities of the Nevada Nuclear Waste Storage Investigation Project at Livermore. It was noted that there never has been a comprehensive, well-documented examination of the basis for the use of J-13 water in the nuclear waste storage investigations. In each of the sections of This Report, an issue relating to the use of J-13 water has been addressed. 58 refs., 19 figs., 8 tabs.

  6. Probabilistic Seismic Hazard Analysis

    SciTech Connect

    Not Available

    1988-01-01

    The purpose of Probabilistic Seismic Hazard Analysis (PSHA) is to evaluate the hazard of seismic ground motion at a site by considering all possible earthquakes in the area, estimating the associated shaking at the site, and calculating the probabilities of these occurrences. The Panel on Seismic Hazard Analysis is charged with assessment of the capabilities, limitations, and future trends of PSHA in the context of alternatives. The report identifies and discusses key issues of PSHA and is addressed to decision makers with a modest scientific and technical background and to the scientific and technical community. 37 refs., 19 figs.

  7. Capillaries for use in a multiplexed capillary electrophoresis system

    DOEpatents

    Yeung, E.S.; Chang, H.T.; Fung, E.N.

    1997-12-09

    The invention provides a side-entry optical excitation geometry for use in a multiplexed capillary electrophoresis system. A charge-injection device is optically coupled to capillaries in the array such that the interior of a capillary is imaged onto only one pixel. In Sanger-type 4-label DNA sequencing reactions, nucleotide identification (``base calling``) is improved by using two long-pass filters to split fluorescence emission into two emission channels. A binary poly(ethyleneoxide) matrix is used in the electrophoretic separations. 19 figs.

  8. Seismic base isolation: Elastomer characterization, bearing modeling and system response

    SciTech Connect

    Kulak, R.F.; Wang, C.Y.; Hughes, T.H.

    1991-01-01

    This paper discusses several major aspects of seismic base isolation systems that employ laminated elastomer bearings. Elastomer constitutive models currently being used to represent the nonlinear elastic and hysteretic behavior are discussed. Some aspects of mechanical characterization testing of elastomers is presented along with representative tests results. The development of a finite element based mesh generator for laminated elastomer bearings is presented. Recent advances in the simulation of base isolated structures to earthquake motions are presented along with a sample problem. 13 refs., 19 figs., 1 tab.

  9. Multiplexed capillary electrophoresis system

    DOEpatents

    Yeung, E.S.; Li, Q.; Lu, X.

    1998-04-21

    The invention provides a side-entry optical excitation geometry for use in a multiplexed capillary electrophoresis system. A charge-injection device is optically coupled to capillaries in the array such that the interior of a capillary is imaged onto only one pixel. In Sanger-type 4-label DNA sequencing reactions, nucleotide identification (``base calling``) is improved by using two long-pass filters to split fluorescence emission into two emission channels. A binary poly(ethyleneoxide) matrix is used in the electrophoretic separations. 19 figs.

  10. Multiplexed capillary electrophoresis system

    DOEpatents

    Yeung, E.S.; Chang, H.T.; Fung, E.N.; Li, Q.; Lu, X.

    1996-12-10

    The invention provides a side-entry optical excitation geometry for use in a multiplexed capillary electrophoresis system. A charge-injection device is optically coupled to capillaries in the array such that the interior of a capillary is imaged onto only one pixel. In Sanger-type 4-label DNA sequencing reactions, nucleotide identification (``base calling``) is improved by using two long-pass filters to split fluorescence emission into two emission channels. A binary poly(ethyleneoxide) matrix is used in the electrophoretic separations. 19 figs.

  11. Renewable-reagent electrochemical sensor

    DOEpatents

    Wang, J.; Olsen, K.B.

    1999-08-24

    A new electrochemical probe(s) design allowing for continuous (renewable) reagent delivery is described. The probe comprises an integrated membrane sampling/electrochemical sensor that prevents interferences from surface-active materials and greatly extends the linear range. The probe(s) is useful for remote or laboratory-based monitoring in connection with microdialysis sampling and electrochemical measurements of metals and organic compounds that are not readily detected in the absence of reacting with the compound. Also disclosed is a method of using the probe(s). 19 figs.

  12. Effects of environmental and physiological variables on the uptake of hydrophobic contaminants by the gills of rainbow trout, Salmo gairdneri (Richardson)

    SciTech Connect

    Black, M.C.

    1989-05-01

    The uptake of contaminants by diffusion across fish gills may be altered by changes in the contaminant's physicochemical form or changes in fish respiration. This study investigated the effects of changes in contaminant uptake due to sorption to humic acid and changes in fish respiration, induced by altering respiratory demand via an acute change in temperature and by altering the diffusional capacity of the gill membrane by exposure to chlorine. In each experimental design the uptake of selected polycyclic aromatic hydrocarbons and polychlorinated biphenyl congeners by the gills of rainbow trout, were measured simultaneously with measurements of fish respiratory functions using a fish metabolic chamber. 110 refs., 19 figs., 7 tabs.

  13. Modern tornado design of nuclear and other potentially hazardous facilities

    SciTech Connect

    Stevenson, J.D.; Zhao, Y.

    1996-01-01

    Tornado wind loads and other tornado phenomena, including tornado missiles and differential pressure effects, have not usually been considered in the design of conventional industrial, commercial, or residential facilities in the United States; however, tornado resistance has often become a design requirement for certain hazardous facilities, such as large nuclear power plants and nuclear materials and waste storage facilities, as well as large liquefied natural gas storage facilities. This article provides a review of current procedures for the design of hazardous industrial facilities to resist tornado effects. 23 refs., 19 figs., 13 tabs.

  14. Accelerator and transport line survey and alignment

    SciTech Connect

    Ruland, R.E.

    1991-10-01

    This paper summarizes the survey and alignment processes of accelerators and transport lines and discusses the propagation of errors associated with these processes. The major geodetic principles governing the survey and alignment measurement space are introduced and their relationship to a lattice coordinate system shown. The paper continues with a broad overview about the activities involved in the step sequence from initial absolute alignment to final smoothing. Emphasis is given to the relative alignment of components, in particular to the importance of incorporating methods to remove residual systematic effects in surveying and alignment operations. Various approaches to smoothing used at major laboratories are discussed. 47 refs., 19 figs., 1 tab.

  15. Fractional processes and nuclear disassembly in very-heavy-ion collisions in the Fermi energy regime

    SciTech Connect

    Schroeder, W.U.

    1991-01-01

    Exclusive measurements of charged products and neutrons were performed for the reactions {sup 197}Au + (29 MeV/u) {sup 208}Pb and {sup 209}Bi + (28.2 MeV/u) {sup 136}Xe. The multiplicities of neutrons and charged particles are found to indicate collision impact parameters with different sensitivities. Characteristic correlations observed between massive products and light particles suggest the dominance of the damped-reaction mechanism in the Fermi energy domain. For central collisions, massive fragments are no longer observed, and a considerable fraction of the mass of the system is found disassembled into light particles and clusters. 75 refs., 19 figs.

  16. Synchronous generator wind energy conversion control system

    SciTech Connect

    Medeiros, A.L.R.; Lima, A.M.N.; Jacobina, C.B.; Simoes, F.J.

    1996-12-31

    This paper presents the performance evaluation and the design of the control system of a WECS (Wind Energy Conversion System) that employs a synchronous generator based on its digital simulation. The WECS discussed in this paper is connected to the utility grid through two Pulse Width Modulated (PWM) power converters. The structure of the proposed WECS enables us to achieve high performance energy conversion by: (i) maximizing the wind energy capture and (ii) minimizing the reactive power flowing between the grid and the synchronous generator. 8 refs., 19 figs.

  17. Galaxies and Saturn's rings: Gravitational analogues of nonneutral plasmas

    SciTech Connect

    Mark, J.W.K.

    1985-04-25

    Orbit and collective dynamics in disk galaxies and in Saturn's rings are gravitational analogues of those occurring in nonneutral plasmas. The interesting problems for such ''gravitational plasmas'' are analogous to single-disk studies of transverse dynamics in particle beams. Of particular interest are various orbit-resonances with spiral density and bending waves in these disks which are analogous to electrostatic waves in nonneutral beam plasmas. The background physics, terminology and results of astrophysical investigations in these fields are surveyed in this paper. 53 refs., 19 figs., 1 tab.

  18. Remote maintenance in nuclear fuel reprocessing

    SciTech Connect

    Herndon, J.N.

    1985-01-01

    Remote maintenance techniques applied in large-scale nuclear fuel reprocessing plants are reviewed with particular attention to the three major maintenance philosophy groupings: contact, remote crane canyon, and remote/contact. Examples are given, and the relative success of each type is discussed. Probable future directions for large-scale reprocessing plant maintenance are described along with advanced manipulation systems for application in the plants. The remote maintenance development program within the Consolidated Fuel Reprocessing Program at the Oak Ridge National Laboratory is also described. 19 refs., 19 figs.

  19. Low-level integrated system test

    SciTech Connect

    Abeele, W.; Nyhan, J.; Hakonson, T.; Drennon, B.J.; Lopez, E.A.; Herrera, W.J.; Langhorst, G.; Martinez, J.L.; Trujillo, G.

    1986-02-01

    An unusually wet season permitted us to test the integrity of our biobarrier installed in the improved or modified plots in our integrated system. Although the modified plots had a reduced water-holding capacity, they delivered leachate only at the drain installed above the biobarrier, demonstrating once more that the biobarrier is behaving successfully as a capillary barrier in rerouting the subsurface flow around the tuff beneath the biobarrier. As a result of vertical water flow impedance, more water was made available to plot vegetation, enhancing its growth dramatically. The capillary barrier theory was backed up by the tensiometer results showing saturation at the upper biobarrier interface. 11 refs., 19 figs

  20. Process for recovering chaotropic anions from an aqueous solution also containing other ions

    DOEpatents

    Rogers, R.; Horwitz, E.P.; Bond, A.H.

    1999-03-30

    A solid/liquid process for the separation and recovery of chaotropic anions from an aqueous solution is disclosed. The solid support comprises separation particles having surface-bonded poly(ethylene glycol) groups, whereas the aqueous solution from which the chaotropic anions are separated contains a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved salt (lyotrope). A solid/liquid phase admixture of separation particles containing bound chaotropic anions in such an aqueous solution is also contemplated, as is a chromatography apparatus containing that solid/liquid phase admixture. 19 figs.

  1. Diagnostic method employing MSH2 nucleic acids

    DOEpatents

    Chapelle, A. de la; Vogelstein, B.; Kinzler, K.W.

    1997-12-02

    The human MSH2 gene, responsible for hereditary non-polyposis colorectal cancer, was identified by virtue of its homology to the MutS class of genes, which are involved in DNA mismatch repair. The sequence of cDNA clones of the human gene are provided, and the sequence of the gene can be used to demonstrate the existence of germ line mutations in hereditary non-polyposis colorectal cancer (HNPCC) kindreds, as well as in replication error{sup +}(RER{sup +}) tumor cells. 19 figs.

  2. Human MSH2 protein

    DOEpatents

    Chapelle, A. de la; Vogelstein, B.; Kinzler, K.W.

    1997-01-07

    The human MSH2 gene, responsible for hereditary non-polyposis colorectal cancer, was identified by virtue of its homology to the MutS class of genes, which are involved in DNA mismatch repair. The sequence of cDNA clones of the human gene are provided, and the sequence of the gene can be used to demonstrate the existence of germ line mutations in hereditary non-polyposis colorectal cancer (HNPCC) kindreds, as well as in replication error{sup +} (RER{sup +}) tumor cells. 19 figs.

  3. Diagnostic method employing MSH2 protein

    DOEpatents

    Chapelle, A. de la; Vogelstein, B.; Kinzler, K.W.

    1998-11-17

    The human MSH2 gene, responsible for hereditary non-polyposis colorectal cancer, was identified by virtue of its homology to the MutS class of genes, which are involved in DNA mismatch repair. The sequence of cDNA clones of the human gene are provided, and the sequence of the gene can be used to demonstrate the existence of germ line mutations in hereditary non-polyposis colorectal cancer (HNPCC) kindreds, as well as in replication error{sup +} (RER{sup +}) tumor cells. 19 figs.

  4. Results from FNAL E745 on neutrino-nucleus interactions (EMC effect and hadron formation)

    SciTech Connect

    Kitagaki, T. . Bubble Chamber Physics Lab.)

    1989-01-01

    The dark tracks (stubs) in high energy neutrino-nucleus interactions in the Tohoku High Resolution Freon Bubble Chamber are investigated. Classifying events into groups by using the dark tracks, correlations between the dark track production and neutrino interactions are studied. Events without dark tracks comprise a reasonable sample of events which occurred on quasi-free nucleons inside nucleus. By comparing the groups using the no dark track group as a comparison sample instead of neutrino-deuterium events, the EMC effect and hadron formation are investigated. This method provides new results which differ somewhat from the conventional data for the EMC effect and formation-rescattering. 10 refs., 17 figs.

  5. Thermal tests of MC3811 rigid/flex printed wiring boards

    SciTech Connect

    Gentry, F.L.

    1990-10-01

    Rigid/flex multilayer printed wiring boards are more sensitive to thermal environmental changes than conventional printed wiring boards. This is manifested because of a composition of dissimilar materials used within the construction of this type of product. During fabrication and assembly, stresses can develop within the plated-through holes from differences in thermal properties of the rigid and flexible materials, primarily thermal coefficient of expansion. Thermal shock and thermal stress tests and rework simulation as defined in MIL-P-50884 have been performed in this study as indicators of processing quality to detect faults and to verify improvements in board reliability. 3 refs., 17 figs., 3 tabs.

  6. (Laboratory for Energy-Related Health Research) annual report, fiscal year 1988

    SciTech Connect

    Abell, D.L.

    1989-09-01

    The major goal of this study on the toxicity of {sup 90}Sr and {sup 226}Ra is to provide information on long-term consequences expected to occur in people from chronic exposure to {alpha}- and {beta}-emitting bone-seeking radionuclides. To meet this goal, we are evaluating the biologic effects of the two radionuclides in the beagle. Similarities between dogs and people provide a valuable base for the scaling of potential hazards from radionuclide contamination from canine to human populations. 36 refs., 17 figs., 11 tabs.

  7. Crystalline mesoporous zirconia catalysts having stable tetragonal pore wall structure

    DOEpatents

    Sachtler, W.M.H.; Huang, Y.Y.

    1998-07-28

    Methods are disclosed for the preparation of new sulfated mesoporous zirconia materials/catalysts with crystalline pore walls of predominantly tetragonal crystal structure, characterized by nitrogen physical sorption measurement, X-ray diffraction, transmission electron microscopy and catalytic tests using n-butane isomerization to iso-butane and alkylation of 1-naphthol with 4-tert-butylstyrene as probe reactions. Sulfate deposition is preferred for the transformation of a mesoporous precursor with amorphous pore walls into a material with crystalline pore walls maintaining the mesoporous characteristics. 17 figs.

  8. Phase 1 report on sensor technology, data fusion and data interpretation for site characterization

    SciTech Connect

    Beckerman, M.

    1991-10-01

    In this report we discuss sensor technology, data fusion and data interpretation approaches of possible maximal usefulness for subsurface imaging and characterization of land-fill waste sites. Two sensor technologies, terrain conductivity using electromagnetic induction and ground penetrating radar, are described and the literature on the subject is reviewed. We identify the maximum entropy stochastic method as one providing a rigorously justifiable framework for fusing the sensor data, briefly summarize work done by us in this area, and examine some of the outstanding issues with regard to data fusion and interpretation. 25 refs., 17 figs.

  9. An analysis of increasing the size of the strategic petroleum reserve to one billion barrels

    SciTech Connect

    Not Available

    1990-01-01

    The Department of Energy's Office of Energy Emergency Policy and Evaluation requested that the Energy Information Administration complete an analysis of the proposed expansion in the Strategic Petroleum Reserve (SPR) from its currently planned size of 750 million barrels to 1000 million barrels. Because the SPR contains only 580 million barrels at this point in time, the benefits and costs of increasing the SPR from 600 to 750 million barrels were also estimated. This report documents the assumptions, methodology, and results of the analysis. 17 figs., 15 tabs.

  10. The principles and construction of linear colliders

    SciTech Connect

    Rees, J.

    1986-09-01

    The problems posed to the designers and builders of high-energy linear colliders are discussed. Scaling laws of linear colliders are considered. The problem of attainment of small interaction areas is addressed. The physics of damping rings, which are designed to condense beam bunches in phase space, is discussed. The effect of wake fields on a particle bunch in a linac, particularly the conventional disk-loaded microwave linac structures, are discussed, as well as ways of dealing with those effects. Finally, the SLAC Linear Collider is described. 18 refs., 17 figs. (LEW)

  11. Experimental studies of actinides in molten salts

    SciTech Connect

    Reavis, J.G.

    1985-06-01

    This review stresses techniques used in studies of molten salts containing multigram amounts of actinides exhibiting intense alpha activity but little or no penetrating gamma radiation. The preponderance of studies have used halides because oxygen-containing actinide compounds (other than oxides) are generally unstable at high temperatures. Topics discussed here include special enclosures, materials problems, preparation and purification of actinide elements and compounds, and measurements of various properties of the molten volts. Property measurements discussed are phase relationships, vapor pressure, density, viscosity, absorption spectra, electromotive force, and conductance. 188 refs., 17 figs., 6 tabs.

  12. Magnetic force microscopy method and apparatus to detect and image currents in integrated circuits

    DOEpatents

    Campbell, A.N.; Anderson, R.E.; Cole, E.I. Jr.

    1995-11-07

    A magnetic force microscopy method and improved magnetic tip for detecting and quantifying internal magnetic fields resulting from current of integrated circuits are disclosed. Detection of the current is used for failure analysis, design verification, and model validation. The interaction of the current on the integrated chip with a magnetic field can be detected using a cantilevered magnetic tip. Enhanced sensitivity for both ac and dc current and voltage detection is achieved with voltage by an ac coupling or a heterodyne technique. The techniques can be used to extract information from analog circuits. 17 figs.

  13. Geology of the Southeast Durham and Southwest Durham 7. 5-minute Quadrangles, North Carolina

    SciTech Connect

    Hoffman, C.W.; Gallagher, P.E.

    1989-01-01

    The Southeast Durham and Southwest Durham 7.5-minute Quadrangles include a 26 kilometer transect of the Durham Triassic basin from the Jonesboro fault on the southeastern side of this half-graben structure to a bounding unconformity on the northwestern side. The basin is filled with non-marine, primarily fluvial, clastic deposits of the Late Triassic Chatham Group. The Chatham Group rocks are intruded by Early Jurassic diabase as dikes and sheets. Bordering rocks are pre-Mesozoic intrusive, metavolcanic and metasedimentary rocks of the Carolina slate belt. This paper discusses the geology of the Southeast Durham and Southwest Durham Quadrangles. 37 refs., 17 figs.

  14. Nuclear multifragmentation: Antiprotons versus photons and heavy ions

    SciTech Connect

    Cugnon, J.

    1994-09-01

    Nuclear multifragmentation is the phenomenon by which a nucleus breaks into many pieces of intermediate size. It occurs in the excitation-energy regime, between the spallation + evaporation regime and the explosive fragmentation regime. The various models of multifragmentation are briefly reviewed and the possibility of critical behavior in the multifragmentation process is underlined. Unanswered problems are stated. It is shown, by model calculations, that antiproton annihilation is, in many respects, better suited than proton-nucleus and heavy-ion collisions for studying multifragmentation and, in other respects, complementary to these other tools. 36 refs., 17 figs., 1 tab.

  15. Parallel pulse processing and data acquisition for high speed, low error flow cytometry

    DOEpatents

    Engh, G.J. van den; Stokdijk, W.

    1992-09-22

    A digitally synchronized parallel pulse processing and data acquisition system for a flow cytometer has multiple parallel input channels with independent pulse digitization and FIFO storage buffer. A trigger circuit controls the pulse digitization on all channels. After an event has been stored in each FIFO, a bus controller moves the oldest entry from each FIFO buffer onto a common data bus. The trigger circuit generates an ID number for each FIFO entry, which is checked by an error detection circuit. The system has high speed and low error rate. 17 figs.

  16. Rf system considerations for a large hadron collider

    SciTech Connect

    Raka, E.

    1988-01-01

    In this paper, we shall discuss how we arrive at a particular choice of voltage and frequency; the type of acceleration structure that would be suitable for obtaining the required voltage and resonant impedance; static beam loading including a simplified beam stability criterion involving the beam current and total rf system shunt impedance; the basic principle of rf phase and frequency control loops; and the effect of rf noise and its interaction with these loops. Finally, we shall consider the need for and design of rf systems to damp independently coherent oscillations of individual bunches or groups of bunches. 30 refs., 17 figs., 2 tabs.

  17. Oak Ridge Reservation Site Management Plan for the Environmental Restoration Program

    SciTech Connect

    Not Available

    1991-09-01

    This site management for the Environmental Restoration (ER) Program implements the Oak Ridge Reservation (ORR) Federal Facility Agreement (FFA) (EPA 1990), also known as an Interagency Agreement (IAG), hereafter referred to as the Agreement.'' The Department of Energy (DOE), the US Environmental Protection Agency (EPA), and the Tennessee Department of Environment and Conservation (TDEC), hereafter known as the Parties,'' entered into this Agreement for the purpose of coordinating remediation activities undertaken on the ORR to comply with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) as amended by the Superfund Amendments, the Resource Conservation and Recovery Act (RCRA), and the National Environmental Policy Act (NEPA). 7 refs., 17 figs.

  18. Hydrogeologic testing plan for Deep Hydronest Test Wells, Deaf Smith County site, Texas

    SciTech Connect

    Not Available

    1987-12-01

    This report discusses methods of hydraulic testing which are recommended for use in the Deep Hydronest Test Wells at the proposed high level nuclear waste repository site in Deaf Smith County, Texas. The deep hydronest wells are intended to provide geologic, geophysical and hydrologic information on the interval from the Upper San Andres Formation to the base of the Pennsylvanian system at the site. Following the period of drilling and testing, the wells will be converted into permanent monitoring installations through which fluid pressures and water quality can be monitored at various depths in the section. 19 refs., 17 figs., 2 tabs.

  19. Deconvolution/identification techniques for 1-D transient signals

    SciTech Connect

    Goodman, D.M.

    1990-10-01

    This paper discusses a variety of nonparametric deconvolution and identification techniques that we have developed for application to 1-D transient signal problems. These methods are time-domain techniques that use direct methods for matrix inversion. Therefore, they are not appropriate for large data'' problems. These techniques involve various regularization methods and permit the use of certain kinds of a priori information in estimating the unknown. These techniques have been implemented in a package using standard FORTRAN that should make the package readily transportable to most computers. This paper is also meant to be an instruction manual for the package. 25 refs., 17 figs., 1 tab.

  20. Method for formation of subsurface barriers using viscous colloids

    DOEpatents

    Apps, J.A.; Persoff, P.; Moridis, G.; Pruess, K.

    1998-11-17

    A method is described for formation of subsurface barriers using viscous liquids where a viscous liquid solidifies at a controlled rate after injection into soil and forms impermeable isolation of the material enclosed within the subsurface barriers. The viscous liquid is selected from the group consisting of polybutenes, polysiloxanes, colloidal silica and modified colloidal silica of which solidification is controlled by gelling, cooling or cross-linking. Solidification timing is controlled by dilution, addition of brines, coating with alumina, stabilization with various agents and by temperature. 17 figs.

  1. Dual stage active magnetic regenerator and method

    DOEpatents

    Pecharsky, V.K.; Gschneidner, K.A. Jr.

    1999-03-30

    A dual stage active magnetic regenerator refrigerator as well as method using the Joule-Brayton thermodynamic cycle includes a high temperature stage refrigerant comprising DyAl{sub 2} or (Dy{sub 1{minus}x}Er{sub x})Al{sub 2} where x is selected to be greater than 0 and less than about 0.3 in combination with a low temperature stage comprising (Dy{sub 1{minus}x}Er{sub x})Al{sub 2} where x is selected to be greater than about 0.5 and less than 1 to provide significantly improved refrigeration efficiency in the liquefaction of gaseous hydrogen. 17 figs.

  2. Raman scattering in crystals

    SciTech Connect

    Edwards, D.F.

    1988-09-30

    A tutorial presentation is given of Raman scattering in crystals. The physical concepts are emphasized rather than the detailed mathematical formalism. Starting with an introduction to the concepts of phonons and conservation laws, the effects of photon-phonon interactions are presented. This interaction concept is shown for a simple cubic crystal and is extended to a uniaxial crystal. The correlation table method is used for determining the number and symmetry of the Raman active modes. Finally, examples are given to illustrate the relative ease of using this group theoretical method and the predictions are compared with measured Raman spectra. 37 refs., 17 figs., 6 tabs.

  3. Dual cure photocatalyst systems

    SciTech Connect

    DeVoe, R.J.; Brown-Wensley, K.A.; Holmes, G.L.; Mathis, M.D.; McCormick, F.B.; Palazzotto, M.C.; Spurgeon, K.M. . Corporate Research Labs.)

    1990-01-01

    A family of dual cure photocatalyst systems is being developed to be used in the solventless processing of organic coatings. The photocatalyst systems consist of organometallic compounds often in combination with other agents. Upon photolysis, the photocatalyst system generates a Lewis acid and a free radical. The Lewis acid can initiate the polymerization of epoxies or the addition of isocyanates and polyols to form polyurethanes while the free radical can initiate the polymerization of acrylates. The performance of the various photocatalyst systems will be compared on the basis of the physical properties of the cured compositions they produce. 17 figs.

  4. Enhancement of wall jet transport properties

    DOEpatents

    Claunch, S.D.; Farrington, R.B.

    1997-02-04

    By enhancing the natural instabilities in the boundary layer and in the free shear layer of a wall jet, the boundary is minimized thereby increasing the transport of heat and mass. Enhancing the natural instabilities is accomplished by pulsing the flow of air that creates the wall jet. Such pulsing of the flow of air can be accomplished by sequentially occluding and opening a duct that confines and directs the flow of air, such as by rotating a disk on an axis transverse to the flow of air in the duct. 17 figs.

  5. ''SMAC'' - Sonic Mapping and Caliper research and development. Final report, Phase IB

    SciTech Connect

    Handy, L.E.

    1985-12-01

    The development of the Sonic Mapping and caliper (SMAC) Tools has been part of an ongoing effort by Hot Hole Instruments, Inc. of Los Alamos, New Mexico, to provide the geothermal, oil and gas drilling industries with improved and accurate tools for the inspection of the insides of boreholes and interiors of wells. Based on the successful completion of a proof of concept phase, referred to as Phase IA, Hot Hole Instruments, Inc. Undertook in Phase IB the design and testing of the SMAC Tool. Work was accomplished during the last half of 1984 and the first half of 1985. 17 figs.

  6. Scanning tip microwave near field microscope

    DOEpatents

    Xiang, X.D.; Schultz, P.G.; Wei, T.

    1998-10-13

    A microwave near field microscope has a novel microwave probe structure wherein the probing field of evanescent radiation is emitted from a sharpened metal tip instead of an aperture or gap. This sharpened tip, which is electrically and mechanically connected to a central electrode, extends through and beyond an aperture in an end wall of a microwave resonating device such as a microwave cavity resonator or a microwave stripline resonator. Since the field intensity at the tip increases as the tip sharpens, the total energy which is radiated from the tip and absorbed by the sample increases as the tip sharpens. The result is improved spatial resolution without sacrificing sensitivity. 17 figs.

  7. Characterization of nitrogen compound types in shale oils using /sup 1/H NMR and high resolution mass spectral analyses

    SciTech Connect

    Thompson, L.F.; Netzel, D.A.

    1984-12-01

    The /sup 1/H nuclear magnetic resonance (NMR) spectra were obtained for nitrogen compound-type fractions from a Geokinetics shale oil distillate and a Caribou intermediately refined oil obtained during catalytic hydroprocessing of the Geokinetics distillate. These fractions were generated using alumina and silica chromatography. The NMR spectra of the fractions were analyzed for hydrogen types and for individual compounds and the results compared with mass spectral data. The observed differences in resonance intensities in the /sup 1/H NMR spectra of the nitrogen fractions from the distillate and intermediately refined oil are also discussed in relationship to hydroprocessing. 17 refs., 17 figs., 5 tabs.

  8. Spray forming process for producing molds, dies and related tooling

    DOEpatents

    McHugh, K.M.; Key, J.F.

    1998-02-17

    A method is disclosed for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers. 17 figs.

  9. N Reactor core heatup sensitivity study for the 32-inch unit cell model

    SciTech Connect

    Martin, F.; Zimmerman, B.; Heard, F.

    1988-02-01

    A number of N Reactor core heatup studies have been performed using the TRUMP-BD computer code. These studies were performed to address questions concerning the dependency of results on potential variations in the material properties and/or modeling assumptions. This report described and documents a series of 31 TRUMP-BD runs that were performed to determine the sensitivity of calculated inner-fuel temperatures to a variety of TRUMP input parameters and also to a change in the node density in a high-temperature-gradient region. The results of this study are based on the 32-in. model. 18 refs., 17 figs., 2 tab.

  10. Investigation of protein binding of radiogallium. Progress report

    SciTech Connect

    Hoffer, P.B.

    1985-07-25

    The main objective of the contract is to study aspects of the localization of gallium-67 in tumor are reported and compared with a new tumor imaging agent, specifically radiolabeled monoclonal tumor antibody. Our studies have demonstrated that phosphate compounds used in bone imaging do not significantly influence gallium-67 localization, that the adenosine triphosphate cannot be used to enhance gallium-67 uptake in malignant tissue, and that gallium-67 has higher affinity than radiolabeled anti-p97 for melanoma, even in tumors which produce significant amounts of p97 antigen on their cell surface. 23 refs., 17 figs., 5 tabs.

  11. Status report on the tectonic fracture and breccia study in the Vantage area

    SciTech Connect

    Chamness, M.A.; Tolan, T.L.

    1983-09-01

    This is a status report on preliminary observations and interpretations which are subject to change with future work. An area near Vantage Washington is currently being examined in order to determine the nature and extent of tectonic breccias and fractures related to faulting and folding in a synclinal area. This report describes the status of that study as of August 1983. The study consists of three phases: geologic mapping, location and description of breccias, and comparison to borehole data. Work completed to date is primarily geologic mapping and preliminary work on the location of breccia zones. 27 refs., 18 figs.

  12. Dispersive effects of transverse magnet displacements in rolled arc achromats

    SciTech Connect

    Fieguth, T.; Kheifets, S.; Murray, J.J.

    1986-09-22

    The effect of transverse displacements of combined function magnets is investigated where the disperion in not matched due to roll. This dispersion function is perturbed by displacement of combined function magnets either singly or coherently. In the latter case the effect of a systematic (or DC) offset of magnets is examined. This type of error can occur due to systematics in the placement or the readout of Beam Position Monitors or equivalently by correcting the orbit of a beam of the wrong momentum with respect to the Arc magnet excitation. 5 refs., 18 figs.

  13. Light-induced voltage alteration for integrated circuit analysis

    DOEpatents

    Cole, E.I. Jr.; Soden, J.M.

    1995-07-04

    An apparatus and method are described for analyzing an integrated circuit (IC). The invention uses a focused light beam that is scanned over a surface of the IC to generate a light-induced voltage alteration (LIVA) signal for analysis of the IC. The LIVA signal may be used to generate an image of the IC showing the location of any defects in the IC; and it may be further used to image and control the logic states of the IC. The invention has uses for IC failure analysis, for the development of ICs, for production-line inspection of ICs, and for qualification of ICs. 18 figs.

  14. Effect of ion implantation on subsequent erosion and wear behavior of solids

    SciTech Connect

    McHargue, C.J.

    1985-01-01

    The removal of material from a solid surface by mechanical forces is influenced by material properties (hardness, fracture toughness, yield strength, surface free energy) as well as system parameters (force, velocity of loading, environment). Ion implantation can modify many of the material properties either by directly affecting the deformation characteristics or indirectly by affecting the chemical or phase composition at the surface. The various forms of wear and erosion are analyzed to determine the material and system parameters which control material removal. The effects of implantation on these critical parameters are noted and examples of changes in surface topography under various test conditions are discussed. 18 figs.

  15. Techniques for optically compressing light intensity ranges

    DOEpatents

    Rushford, M.C.

    1989-03-28

    A pin hole camera assembly for use in viewing an object having a relatively large light intensity range, for example a crucible containing molten uranium in an atomic vapor laser isotope separator (AVLIS) system is disclosed herein. The assembly includes means for optically compressing the light intensity range appearing at its input sufficient to make it receivable and decipherable by a standard video camera. A number of different means for compressing the intensity range are disclosed. These include the use of photogray glass, the use of a pair of interference filters, and the utilization of a new liquid crystal notch filter in combination with an interference filter. 18 figs.

  16. The postural function of the iliotibial tract.

    PubMed Central

    Evans, P.

    1979-01-01

    A new definition of the iliotibial tract is made. Its anatomical and physical characteristics are summarised and its known functions discussed. The various postures adopted by standing Man are looked at and one resting posture is closely analysed. Hence a new role is proposed for the iliotibial tract. In the hip bone a new bony effect of the iliotibial tract is proposed. The presence of this structure is traced in the fossil record and linked to the anthropological evidence of upright posture. Images FIG. 1-8 FIG. 9-16 FIG. 17-25 FIG. 26-34 PMID:475270

  17. Block copolymer adhesion promoters via ring-opening metathesis polymerization

    DOEpatents

    Kent, M.S.; Saunders, R.

    1997-02-18

    Coupling agents are disclosed based on functionalized block copolymers for bonding thermoset polymers to solid materials. These are polymers which possess at least two types of functional groups, one which is able to attach to and react with solid surfaces, and another which can react with a thermoset resin, which are incorporated as pendant groups in monomers distributed in blocks (typically two) along the backbone of the chain. The block copolymers in this invention are synthesized by living ring-opening metathesis polymerization. 18 figs.

  18. Method and apparatus for generating low energy nuclear particles

    DOEpatents

    Powell, J.R.; Reich, M.; Ludewig, H.; Todosow, M.

    1999-02-09

    A particle accelerator generates an input particle beam having an initial energy level above a threshold for generating secondary nuclear particles. A thin target is rotated in the path of the input beam for undergoing nuclear reactions to generate the secondary particles and correspondingly decrease energy of the input beam to about the threshold. The target produces low energy secondary particles and is effectively cooled by radiation and conduction. A neutron scatterer and a neutron filter are also used for preferentially degrading the secondary particles into a lower energy range if desired. 18 figs.

  19. Nuclear spectroscopic studies. Progress report

    SciTech Connect

    Bingham, C.R.; Riedinger, L.L.; Sorensen, S.P.

    1996-01-16

    This report describes progress in the experimental nuclear physics program of the University of Tennessee, Knoxville. It presents findings related to properties of high-spin states, low-energy levels of nuclei far from stability, and high-energy heavy-ion physics, as well as a brief description of the Joint Institute of Heavy Ion Research (a collaboration between the University of Tennessee, Vanderbilt University, and Oak Ridge National Laboratory) and its activities (particularly those of the last few years), and a list of publications. 89 refs., 18 figs., 5 tabs.

  20. Research and Development Report, Fiscial Year 1989-1990.

    SciTech Connect

    United States. Bonneville Power Administration.

    1991-08-01

    Since the 1940s, the Bonneville Power Administrative (BPA), has sought to advance an efficient system to provide the Pacific Northwest region with safe, reliable, and cost-effective electrical power. Research and development (R D) activities support that mission. Each biennium, R D managers issue a digest report of the various programs and activities in each of the technological arenas. The report covers a few projects, considered as yielding particularly significant results, as spotlights. Others are described less fully; in some cases with a simple annotation. The report's divisions correspond to the major categories of R D projects: fish and wildlife, energy resources, and transmission technology. 18 figs., 4 tabs.

  1. Summary report of results of the vapor vacuum extraction test at the RWMC (Radioactive Waste Management Complex)

    SciTech Connect

    Sisson, J.B.; Ellis, G.C.

    1990-11-01

    A test scale vapor vacuum extraction system was operated for four months at the Radioactive Waste Management Complex. The extraction system removed more than 65 million ft{sup 3} of soil gas containing 429 Kg of Carbon Tetrachloride and 164 Kg of TCE. Hydraulic properties of the basalts were estimated and input into a numerical transport model. The model simulations indicated that a rubble zone at 190 ft dominated the soil gas flow pattern. Refined calibration of transport models will allow enhancement of the production system design to increase operational efficiency and effectiveness. 7 refs., 18 figs.

  2. Modification of the Sandia National Laboratories/California advanced coordinate measuring machine for high speed scanning

    SciTech Connect

    Baldwin, J.M.; Pilkey, R.D.; Cassou, R.M.; Summerhays, K.D.

    1997-03-01

    The Moore M48V high accuracy coordinate measuring machine (CMM), while mechanically capable of exact measurement of physical artifacts, is not, in its original configuration, well suited for rapid gathering of high density dimensional information. This report describes hardware and software modifications to the original control and data acquisition system that allow relatively high speed scanning of cylindrical features. We also estimate the accuracy of the individual point data on artifacts measured with this system and provide detailed descriptions of the hardware and software apparatus as an aid to others who may wish to apply the system to cylindrical or other simple geometries. 6 refs., 18 figs., 1 tab.

  3. Recent advances in the kinetics of oxygen reduction

    SciTech Connect

    Adzic, R.

    1996-07-01

    Oxygen reduction is considered an important electrocatalytic reaction; the most notable need remains improvement of the catalytic activity of existing metal electrocatalysts and development of new ones. A review is given of new advances in the understanding of reaction kinetics and improvements of the electrocatalytic properties of some surfaces, with focus on recent studies of relationship of the surface properties to its activity and reaction kinetics. The urgent need is to improve catalytic activity of Pt and synthesize new, possibly non- noble metal catalysts. New experimental techniques for obtaining new level of information include various {ital in situ} spectroscopies and scanning probes, some involving synchrotron radiation. 138 refs, 18 figs, 2 tabs.

  4. The Lamb shift in heliumlike uranium (U/sup 90 +/)

    SciTech Connect

    Munger, C.T. Jr.

    1987-01-01

    An experimental value of 70.4 (8.3) eV for the one-electron Lamb shift in uranium is reported, in agreement with the theoretical value of 75.3 (0.4) eV. The Lamb shift is extracted from a beam-foil time-of-flight measurement of the 54.4 (3.4) ps lifetime of the 1s 2p/sub 1/2/ /sup 3/P/sub 0/ state of heliumlike (two-electron) uranium. 18 figs.

  5. Substructure and strong interactions at the TeV scale

    SciTech Connect

    Peskin, M.E.

    1985-12-01

    A review is given of the current status of the three main theoretical ideas relevant to strong-interaction 1 TeV physics. These are composite vector bosons, Higgs bosons (''Technicolor''), and matter fermions. All involve the assumption that some object which is assumed to be fundamental in the standard model actually has dynamical internal structure. Complex, mechanistic models of the new physics are discussed. A brief digression is then made on how the weak interaction allows probing for this new structure. Direct manifestations of new 1 TeV strong interactions are discussed. 125 refs., 18 figs. (LEW)

  6. Method for construction of normalized cDNA libraries

    DOEpatents

    Soares, M.B.; Efstratiadis, A.

    1998-11-03

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3` noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to appropriate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library. This invention also provides normalized cDNA libraries generated by the above-described method and uses of the generated libraries. 19 figs.

  7. Low-cost laser diode array

    DOEpatents

    Freitas, B.L.; Skidmore, J.A.

    1999-06-01

    A substrate is used to fabricate a low-cost laser diode array. A substrate is machined from an electrically insulative material that is thermally conductive, or two substrates can be bonded together in which the top substrate is electrically as well as thermally conductive. The substrate thickness is slightly longer than the cavity length, and the width of the groove is wide enough to contain a bar and spring (which secures the laser bar firmly along one face of the groove). The spring also provides electrical continuity from the backside of the bar to the adjacent metalization layer on the laser bar substrate. Arrays containing one or more bars can be formed by creating many grooves at various spacings. Along the groove, many bars can be adjoined at the edges to provide parallel electrical conduction. This architecture allows precise and predictable registration of an array of laser bars to a self-aligned microlens array at low cost. 19 figs.

  8. Improved methods for high resolution electron microscopy

    SciTech Connect

    Taylor, J.R.

    1987-04-01

    Existing methods of making support films for high resolution transmission electron microscopy are investigated and novel methods are developed. Existing methods of fabricating fenestrated, metal reinforced specimen supports (microgrids) are evaluated for their potential to reduce beam induced movement of monolamellar crystals of C/sub 44/H/sub 90/ paraffin supported on thin carbon films. Improved methods of producing hydrophobic carbon films by vacuum evaporation, and improved methods of depositing well ordered monolamellar paraffin crystals on carbon films are developed. A novel technique for vacuum evaporation of metals is described which is used to reinforce microgrids. A technique is also developed to bond thin carbon films to microgrids with a polymer bonding agent. Unique biochemical methods are described to accomplish site specific covalent modification of membrane proteins. Protocols are given which covalently convert the carboxy terminus of papain cleaved bacteriorhodopsin to a free thiol. 53 refs., 19 figs., 1 tab.

  9. Real time speech formant analyzer and display

    DOEpatents

    Holland, G.E.; Struve, W.S.; Homer, J.F.

    1987-02-03

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user. 19 figs.

  10. Non-accelerator particle physics

    SciTech Connect

    Steinberg, R.I.; Lane, C.E.

    1991-09-01

    The goals of this research are the experimental testing of fundamental theories of physics such as grand unification and the exploration of cosmic phenomena through the techniques of particle physics. We are working on the MACRO experiment, which employs a large area underground detector to search for grand unification magnetic monopoles and dark matter candidates and to study cosmic ray muons as well as low and high energy neutrinos: the {nu}IMB project, which seeks to refurbish and upgrade the IMB water Cerenkov detector to perform an improved proton decay search together with a long baseline reactor neutrino oscillation experiment using a kiloton liquid scintillator (the Perry experiment); and development of technology for improved liquid scintillators and for very low background materials in support of the MACRO and Perry experiments and for new solar neutrino experiments. 21 refs., 19 figs., 6 tabs.

  11. Interim reclamation report: Basalt Waste Isolation Project exploration shaft site

    SciTech Connect

    Brandt, C.A.; Rickard, W.H. Jr.; Hefty, M.G.

    1990-02-01

    In 1968, a program was started to assess the feasibility of storing Hanford Site defense waste in deep caverns constructed in basalt. This program was expanded in 1976 to include investigations of the Hanford Site as a potential location for a mined commercial nuclear waste repository. Extensive studies of the geotechnical aspects of the site were undertaken, including preparations for drilling a large diameter Exploratory Shaft. This report describes the development of the reclamation program for the Exploratory Shaft Facility, its implementation, and preliminary estimates of its success. The goal of the reclamation program is to return sites disturbed by the repository program as nearly as practicable to their original conditions using native plant species. 43 refs., 19 figs., 9 tabs.

  12. Nonlinear system vibration---The appearance of chaos

    SciTech Connect

    Hunter, N.F. Jr.

    1990-01-01

    This paper begins with an examination of the differential equation for a single degree of freedom force excited oscillator and considers the state space behavior of linear, nonlinear, and chaotic single degree of freedom systems. The fundamental characteristics of classical chaos are reviewed: sensitivity to initial conditions, positive Lyapunov exponents, complex Poincare maps, fractal properties of motion in the state space, and broadening of the power spectrum of the system response. Illustrated examples of chaotic behavior include motion in a two well potential -- the chaos beam described in Moon and a hardening base excited Duffing system. Chaos-like phenomenon which occur with nonperiodic forcing are examined in the context of the two well potential and hardening Duffing systems. The paper concludes with some suggestions for detecting and modelling nonlinear or chaotic behavior. 19 refs., 19 figs.

  13. Memory device using movement of protons

    DOEpatents

    Warren, W.L.; Vanheusden, K.J.R.; Fleetwood, D.M.; Devine, R.A.B.

    1998-11-03

    An electrically written memory element is disclosed utilizing the motion of protons within a dielectric layer surrounded by layers on either side to confine the protons within the dielectric layer with electrode means attached to the surrounding layers to change the spatial position of the protons within the dielectric layer. The device is preferably constructed as a silicon-silicon dioxide-silicon layered structure with the protons being introduced to the structure laterally through the exposed edges of the silicon dioxide layer during a high temperature anneal in an atmosphere containing hydrogen gas. The device operates at low power, is preferably nonvolatile, is radiation tolerant, and is compatible with convention silicon MOS processing for integration with other microelectronic elements on the same silicon substrate. With the addition of an optically active layer, the memory element becomes an electrically written, optically read optical memory element. 19 figs.

  14. Environmental assessment of SP-100 ground engineering system test site: Hanford Site, Richland, Washington

    SciTech Connect

    Not Available

    1988-12-01

    The US Department of Energy (DOE) proposes to modify an existing reactor containment building (decommissioned Plutonium Recycle Test Reactor (PRTR) 309 Building) to provide ground test capability for the prototype SP-100 reactor. The 309 Building (Figure 1.1) is located in the 300 Area on the Hanford Site in Washington State. The National Environmental Policy Act (NEPA) requires that Federal agencies assess the potential impacts that their actions may have on the environment. This Environmental Assessment describes the consideration given to environmental impacts during reactor concept and test site selection, examines the environmental effects of the DOE proposal to ground test the nuclear subsystem, describes alternatives to the proposed action, and examines radiological risks of potential SP-100 use in space. 73 refs., 19 figs., 7 tabs.

  15. Method and apparatus for cutting, abrading, and drilling with sublimable particles and vaporous liquids

    DOEpatents

    Bingham, D.N.; Swainston, R.C.; Palmer, G.L.

    1998-03-31

    A gas delivery system provides a first gas which is in a liquid state under extreme pressure and in a gaseous state under intermediate pressure. A particle delivery system provides a slurry comprising the first gas in a liquid state and a second gas in a solid state. The second gas is selected so that it will solidify at a temperature at or above the temperature of the first gas in a liquid state. A nozzle assembly connected to the gas delivery system and to the particle delivery system produces a stream having a high velocity central jet comprising the slurry, a liquid sheath surrounding the central jet comprising the first gas in a liquid state and an outer jacket surrounding the liquid sheath comprising the first gas in a gas state. 19 figs.

  16. Fluid flow and chemical reaction kinetics in metamorphic systems

    SciTech Connect

    Lasaga, A.C.; Rye, D.M. )

    1993-05-01

    The treatment and effects of chemical reaction kinetics during metamorphism are developed along with the incorporation of fluid flow, diffusion, and thermal evolution. The interplay of fluid flow and surface reaction rates, the distinction between steady state and equilibrium, and the possible overstepping of metamorphic reactions are discussed using a simple analytic model. This model serves as an introduction to the second part of the paper, which develops a reaction model that solves the coupled temperature-fluid flow-chemical composition differential equations relevant to metamorphic processes. Consideration of stable isotopic evidence requires that such a kinetic model be considered for the chemical evolution of a metamorphic aureole. A general numerical scheme is discussed to handle the solution of the model. The results of this kinetic model allow us to reach several important conclusions regarding the factors controlling the chemical evolution of mineral assemblages during a metamorphic event. 41 refs., 19 figs., 5 tabs.

  17. Deflagration to detonation in HMX under high confinement. [HMX confined in steel tubes

    SciTech Connect

    McAfee, J.M.; Campbell, A.W.; Asay, B.W.

    1987-01-01

    The deflagration-to-detonation behavior of HMX confined in steel tubes was studied by means of x radiography, light emission, and various pin techniques. Unlike most reported experiments, the HMX bed was ignited by driving a piston (initially at rest and in contact with the HMX) into the bed with the pressure generated from burning, low-density HMX on the opposite side of the piston. Because a gasless igniter is used to start the burning of the low-density HMX, the piston has a relatively smooth initial motion. Analysis of the data from these experiments gives a rather detailed picture of the DDT process under these conditions. 2 refs., 19 figs.

  18. Problem definition study on techniques and methodologies for evaluating the chemical and toxicological properties of combustion products of gun systems, Volume 1: Final report

    SciTech Connect

    Ross, R.H.; Pal, B.C.; Lock, S.; Ramsey, R.S.; Jenkins, R.A.; Griest, W.H.; Guerin, M.R.

    1988-03-01

    Gun exhaust is a complex mixture of both organic and inorganic chemical species. Similar to other mixtures, it has both vapor and particulate phases. This report contains information concerning the chemical characterization of gun exhaust and offers recommendations for its chemical and toxicological investigation. Propellent compositions used in munitions are all nitrocellulose based but are categorized by the inclusion of the other major ingredients (i.e., single-based propellants contain nitrocellulose only, double-base propellants contain nitrocellulose and nitroglycerin, and triple-base propellants contain nitrocellulose, nitroguanidine, and nitroglycerin). The principal decomposition products present in gun exhaust are carbon monoxide, hydrogen, carbon dixiode, water, and nitrogen (approximately 99% by volume). A number of minor products have been reported to be present in gun exhaust including nitrogen oxides, ammonia, inorganic particulates (e.g., lead and copper), and polycylic aromatic hydrocarbons (of unknown origin). 233 refs., 19 figs., 19 tabs.

  19. Method and apparatus for digitally based high speed x-ray spectrometer

    DOEpatents

    Warburton, W.K.; Hubbard, B.

    1997-11-04

    A high speed, digitally based, signal processing system which accepts input data from a detector-preamplifier and produces a spectral analysis of the x-rays illuminating the detector. The system achieves high throughputs at low cost by dividing the required digital processing steps between a ``hardwired`` processor implemented in combinatorial digital logic, which detects the presence of the x-ray signals in the digitized data stream and extracts filtered estimates of their amplitudes, and a programmable digital signal processing computer, which refines the filtered amplitude estimates and bins them to produce the desired spectral analysis. One set of algorithms allow this hybrid system to match the resolution of analog systems while operating at much higher data rates. A second set of algorithms implemented in the processor allow the system to be self calibrating as well. The same processor also handles the interface to an external control computer. 19 figs.

  20. Prospects for and tests of hadron calorimetry with silicon

    SciTech Connect

    Brau, James E.; Gabriel, Tony A.; Rancoita, P. G.

    1989-03-01

    Hadron calorimetry with silicon may provide crucial capabilities in experiments at the high luminosity, high energy colliders of the future, particularly due to silicon's fast intrinsic speed and absolute calibration. The important underlying processes of our understanding of hadron calorimeters are reviewed to set the framework for the presentation of recent calculations of the expected performance of silicon detector based hadron calorimeters. Such devices employing uranium are expected to achieve the compensation condition (that is, the ratio of the most probable electron signal to hadron signal (e/h) is approx.1.0) based on the understanding that has been derived from the uranium-liquid argon and uranium-plastic scintillator systems. In fact, even lead-silicon calorimeters are found to achieve the attractive value for the e/h ratio of 1.16 at 10 GeV. An experimental test of these predictions is underway at CERN by the SICAPO Collaboration. 64 refs., 19 figs.

  1. New, heavy transuranium isotopes

    SciTech Connect

    Hulet, E.K.

    1990-10-22

    In this report, we offer our most recent results concerning the decay properties for five new isotopes of Md, No, Lr, and for {sup 258m}Md. In additions to these successful experiments, we have also conducted searches for {sup 263}(105), {sup 264}(105), {sup 272}(109), and superheavy elements from bombardments of {sup 254}Es with heavy ions. {sup 2} An exciting finding in the course of this work is a new fission phenomenon, which we have termed bidmodal fission''. This is described in a subsequent section. The final part summarizes our conclusions based on the unexpectedly long half-lives and surprising fission properties of the heaviest nuclei. 27 refs., 19 figs.

  2. Ion optics of the Linac--LEB transfer line

    SciTech Connect

    Bhandari, R.K.; Penner, S.

    1990-12-01

    This report describes the ion optical properties of a proposed transfer line to inject a nominal 25 mA H{sup {minus}} beam at 600 MeV from the Linac into the Low Energy Booster (LEB) synchrotron. Ion optical investigations have been carried out in detail using the TRANSPORT, TURTLE and TRACE 3-D codes. The calculations take account of linear space charge effects of up to 50 mA average beam current. These effects have been found to be quite appreciable, especially on the longitudinal phase space. Procedure for their evaluation and optimization are described. Effects of some imperfections in the beam line magnets have been studied. 6 refs., 19 figs., 4 tabs.

  3. Modeling radon transport in dry, cracked soil

    SciTech Connect

    Holford, D.J. ); Schery, S.D.; Wilson, J.L.; Phillips, F.M. )

    1993-01-10

    A two-dimensional finite element code was used to investigate the effect of changes in surface air pressure on radon flux from soil with parallel, partially penetrating cracks. A sensitivity analysis investigates the effects of various crack dimensions, soil characteristics, and surface air pressure on radon flux from the soil surface to the atmosphere. Simulation results indicate that radon flux is most sensitive to soil properties; the diffusion coefficient is most important, followed by permeability and porosity. Radon flux is also sensitive to changes in barometric pressure, which cause variations in radon flux above and below the average diffusive flux. Sinusoidal variations in barometric pressure cause a net increase in the average radon flux from the soil, because increases in flux during periods of decreasing pressure are greater than the decreases in flux during periods of decreasing pressure of equal magnitude. Cracks were found to significantly increase radon flux from soils of low permeability. 33 refs. 19 figs., 1 tab.

  4. Analysis of physical training of security inspectors at Los Alamos National Laboratory: A preliminary report

    SciTech Connect

    Burkhalter, H.E.; Tietjen, G.L.; Sessions, J.C.; Hook, T.R.

    1989-11-01

    One-half and one-mile runs and 40-yard dash times were analyzed for security inspectors (SIs) at Los Alamos National Laboratory. The effectiveness of grip-strength conditioning was also determined. Both males and females met running sprint standards well within the limits established by the Department of Energy, and there were no adverse effects among any age decades or either gender. Reducing training from three to two days per week resulted in a statistically significant decrease in qualification performance. Increase in grip strength was noted in the left hand only when SIs trained two days per week for nine weeks. Further analysis should determine the appropriate training frequency for this population. These results suggest that no significant improvement is derived from aerobic training occurring less than three days per week. 7 refs., 19 figs.

  5. Analysis of a teetered, variable-speed rotor: final report

    SciTech Connect

    Weber, T L; Wilson, R E; Walker, S N

    1991-06-01

    A computer model of a horizontal axis wind turbine (HOOT) with four structural degrees of freedom has been derived and verified. The four degrees of freedom include flapwise motion of the blades, teeter motion, and variable rotor speed. Options for the variable rotor speed include synchronous, induction, and constant-tip speed generator models with either start, stop, or normal operations. Verification is made by comparison with analytical solutions and mean and cyclic ESI-80 data. The Veers full-field turbulence model is used as a wind input for a synchronous and induction generator test case during normal operation. As a result of the comparison, it is concluded that the computer model can be used to predict accurately mean and cyclic loads with a turbulent wind input. 47 refs., 19 figs.

  6. Status of data, major results, and plans for geophysical activities, Yucca Mountain Project

    SciTech Connect

    Oliver, H.W.; Hardin, E.L.; Nelson, P.H.

    1990-07-01

    This report describes past and planned geophysical activities associated with the Yucca Mountain Project and is intended to serve as a starting point for integration of geophysical activities. This report relates past results to site characterization plans, as presented in the Yucca Mountain Site Characterization Plan (SCP). This report discusses seismic exploration, potential field methods, geoelectrical methods, teleseismic data collection and velocity structural modeling, and remote sensing. This report discusses surface-based, airborne, borehole, surface-to-borehole, crosshole, and Exploratory Shaft Facility-related activities. The data described in this paper, and the publications discussed, have been selected based on several considerations; location with respect to Yucca Mountain, whether the success or failure of geophysical data is important to future activities, elucidation of features of interest, and judgment as to the likelihood that the method will produce information that is important for site characterization. 65 refs., 19 figs., 12 tabs.

  7. Flooding studies of proposed repository locations in the Palo Duro Basin of the Texas Panhandle

    SciTech Connect

    Not Available

    1985-04-01

    This report contains the results of flooding studies of those stream channels that drain the proposed locations of a high-level nuclear-waste repository in Deaf Smith and Swisher Counties, Texas. Included are computations of the flood hydrographs and water surface profiles of the 100-year, 500-year, and probable maximum floods for Palo Duro Creek, Tule Creek, and Pleasant Draw. The hydrographs were produced according to the method of the Soil Conservation Service for ungaged watersheds, and the computations were made with computer programs developed by the US Army Corps of Engineers. The flood hydrographs were computed with the HEC-1 Flood Hydrograph Package and the water surface elevations with the HEC-2 Water Surface Profiles program. 76 refs., 19 figs., 16 tabs.

  8. Chemistry and uses of carbon dioxide. Final report

    SciTech Connect

    Wender, I.; Sayari, A.

    1986-06-01

    Carbon dioxide, CO/sub 2/, long considered a compound of large but limited uses, mostly as a chemical in the manufacture of the fertilizer, urea, has additional great values derived from a combination of its physical and chemical properties. Its greatest use at present is for enhanced oil recovery, an application that is demanding more CO/sub 2/ than is now available. This report delineates a number of other present and potential uses of CO/sub 2/ such as in supercritical separations, methanol and higher alcohol synthesis, refrigeration and the manufacture of polymers. A future usage of CO/sub 2/ will be an outgrowth of research on its catalytic and stoichiometric reactions with transition metals. The isolation and purification of CO/sub 2/ from coal and other fossil fuel gasifiers (possibly even from stack gases) is an area that promises visibly great rewards as a result of intensive research and development. 256 refs., 19 figs., 7 tabs.

  9. Closure plan for the decommissioned high explosives rinse-water lagoons at Lawrence Livermore National Laboratory Site 300

    SciTech Connect

    Carpenter, D.W.; Lamarre, A.L.; Crow, N.B.; Swearengen, P.M.

    1988-05-31

    The High Explosives (HE) Process Area is a major facility at Lawrence Livermore National Laboratory (LLNL) Site 300. Within the Process Area, rinse water from various buildings formerly was discharged to nine relatively small, unlined lagoons where it was disposed of by evaporation and infiltration. In 1985, LLNL decommissioned these lagoons and diverted the rinse waters to two doubly lined surface impoundments. LLNL conducted the hydrogeologic investigations required to support the permanent closure of the none decommissioned lagoons. These studies included drilling ground water monitoring wells and extensively collecting soil and rock samples, which were analyzed for EPA toxic metals, HE compounds, and purgeable and extractable priority organic pollutants. On October 26, 1987, the RWQCB requested that we prepare a comprehensive report to summarize and discuss the findings of the LLNL HE Process Area Investigation. This report is our response to the Board's request. 22 refs., 19 figs. , 45 tabs.

  10. Inventory of power plants in the United States as of January 1, 1998

    SciTech Connect

    1998-12-01

    The Inventory of Power Plants in the United States provides annual statistics on generating units operated by electric utilities in the US (the 50 States and the District of Columbia). Statistics presented in this report reflect the status of generating units as of January 1, 1998. The publication also provides a 10-year outlook for generating unit additions and generating unit changes. This report is prepared annually by the Energy Information Administration (EIA). Data summarized in this report are useful to a wide audience. This is a report of electric utility data; in cases where summary data or nonconfidential data of nonutilities are presented, it is specifically noted as nonutility data. 19 figs., 36 tabs.

  11. VaporSense contamination-resistant high temperature uv hygrometer

    SciTech Connect

    Gersh, M.E.; Matthew, M.W.; Bangert, M.D.; Shuck, P.

    1988-01-01

    The use of reliable and accurate hygrometers to monitor and control the operation of drying hoods would result in significant energy savings and improvement in product quality. We have developed such a hygrometer, VaporSense, which operates at high temperature and humidity in environments containing high concentrations of particulates and corrosive vapors. VaporSense uses the differential adsorption of light by water vapor at two ultraviolet wavelengths to determine absolute humidity. A uv fiber-optic probe is inserted into the contaminating environment. Optical surfaces are kept clean by a curtain of dry air. VaporSense prototypes have been installed in a variety of industrial drying sites. Stable, long term, contamination free operation was demonstrated. 11 refs., 19 figs.

  12. Rise and tilt of metamorphic rocks in the lower plate of a detachment fault in the Funeral Mountains, Death Valley, California

    SciTech Connect

    Hoisch, T.D. ); Simpson, C. )

    1993-04-10

    The authors attempt to integrate new and old observations on the Funeral Mountains, in Death Valley, California, into an integrated model of the evolution of the lower plate in this region. This area consists of a detachment fault. Much effort has been directed toward explaining the development of detachment faults. Extensive petrologic, geochronologic and mapping evidence had been developed. The authors combine thermobarometric data on unsheared metamorphic rock in this region, kinematic analysis of folding in the area, and new geochronologic data from fission track measurements, K-Ar and [sup 40]Ar/[sup 39]Ar dating measurements. Their conclusion is that the data supports the feature of models for detachment faulting which claim that a fault surface dips and undergoes a rotation to a horizontal orientation, accompanied by a comparable tilt of the lower plate. 64 refs., 19 figs., 4 tabs.

  13. Heat pulse propagation studies in TFTR

    SciTech Connect

    Fredrickson, E.D.; Callen, J.D.; Colchin, R.J.; Efthimion, P.C.; Hill, K.W.; Izzo, R.; Mikkelsen, D.R.; Monticello, D.A.; McGuire, K.; Bell, J.D.

    1986-02-01

    The time scales for sawtooth repetition and heat pulse propagation are much longer (10's of msec) in the large tokamak TFTR than in previous, smaller tokamaks. This extended time scale coupled with more detailed diagnostics has led us to revisit the analysis of the heat pulse propagation as a method to determine the electron heat diffusivity, chi/sub e/, in the plasma. A combination of analytic and computer solutions of the electron heat diffusion equation are used to clarify previous work and develop new methods for determining chi/sub e/. Direct comparison of the predicted heat pulses with soft x-ray and ECE data indicates that the space-time evolution is diffusive. However, the chi/sub e/ determined from heat pulse propagation usually exceeds that determined from background plasma power balance considerations by a factor ranging from 2 to 10. Some hypotheses for resolving this discrepancy are discussed. 11 refs., 19 figs., 1 tab.

  14. Annual snowpack patterns across the Rockies: Long-term trends and associated 500-mb synoptic patterns

    SciTech Connect

    Changnon, D. ); McKee, T.B.; Doesken, N.J. )

    1993-03-01

    Winter snowpack was investigated to determine spatial and temporal climate variability in a five-state region (Colorado, Idaho, Montana, Utah, and Wyoming) in the northern Rocky Mountains, covering the period 1951-1985. Annual 1 April snowpack (SN) measurements were selected for analyses. Three basic and persistent patterns of annual SN values surfaced: years with a consistent anomaly over the entire region (wet or dry); years with a distinct north-to-south gradient; and average years. Nearly 90% of the nonaverage annual SN patterns were explained by the frequency of seven 500-mb winter synoptic patterns. The wet-north-dry-south gradient SN patterns occurred only before 1974, and the dry-north-wet-south gradient southern areas of the five-state region are due to periods when one of the two north-to-south gradient SN patterns occurred and are explained by the changes in the frequency of synoptic patterns. 20 refs., 19 figs., 6 tabs.

  15. Computer modeling and simulation in inertial confinement fusion

    SciTech Connect

    McCrory, R.L.; Verdon, C.P.

    1989-03-01

    The complex hydrodynamic and transport processes associated with the implosion of an inertial confinement fusion (ICF) pellet place considerable demands on numerical simulation programs. Processes associated with implosion can usually be described using relatively simple models, but their complex interplay requires that programs model most of the relevant physical phenomena accurately. Most hydrodynamic codes used in ICF incorporate a one-fluid, two-temperature model. Electrons and ions are assumed to flow as one fluid (no charge separation). Due to the relatively weak coupling between the ions and electrons, each species is treated separately in terms of its temperature. In this paper we describe some of the major components associated with an ICF hydrodynamics simulation code. To serve as an example we draw heavily on a two-dimensional Lagrangian hydrodynamic code (ORCHID) written at the University of Rochester's Laboratory for Laser Energetics. 46 refs., 19 figs., 1 tab.

  16. Atomic energy as an humane endeavor: Retrospective on its development

    SciTech Connect

    Seaborg, G.T.; Stahlkopf, K.E.

    1989-01-01

    This report is a speech delivered in Tokyo, Japan, by the author. It covers the historical aspects of atomic energy, from the pre-fission days until present. Such pioneer experiments conducted by O. Hahn, L. Meitner, and F. Strassmann to describe barium isotopes as the result of bombardment of uranium with neutrons are discussed. The author also discussed in detail the pre-war nuclear research at Berkeley, a leading center of nuclear research. Such important events as the synthesis and identification of cobalt-60, iodine-131, and technetium-99m are also discussed. The author discussed the nuclear power as a source of electricity and the perspective on the future of nuclear power. 32 refs., 19 figs., 5 tabs.

  17. Geothermal energy in the western United States and Hawaii: Resources and projected electricity generation supplies. [Contains glossary and address list of geothermal project developers and owners

    SciTech Connect

    Not Available

    1991-09-01

    Geothermal energy comes from the internal heat of the Earth, and has been continuously exploited for the production of electricity in the United States since 1960. Currently, geothermal power is one of the ready-to-use baseload electricity generating technologies that is competing in the western United States with fossil fuel, nuclear and hydroelectric generation technologies to provide utilities and their customers with a reliable and economic source of electric power. Furthermore, the development of domestic geothermal resources, as an alternative to fossil fuel combustion technologies, has a number of associated environmental benefits. This report serves two functions. First, it provides a description of geothermal technology and a progress report on the commercial status of geothermal electric power generation. Second, it addresses the question of how much electricity might be competitively produced from the geothermal resource base. 19 figs., 15 tabs.

  18. Infrared spectroscopy of ionic clusters

    SciTech Connect

    Price, J.M. . Dept. of Chemistry Lawrence Berkeley Lab., CA )

    1990-11-01

    This thesis describes new experiments wherein the infrared vibrational predissociation spectra of a number of mass-selected ionic cluster systems have been obtained and analyzed in the 2600 to 4000 cm{sup {minus}1} region. The species studied include: the hydrated hydronium ions, H{sub 3}O{sup +} (H{sub 2}O){sub 3 {minus}10}, ammoniated ammonium ions, NH{sub 4}{sup +}(NH{sub 3}){sub 1 {minus}10} and cluster ions involving both water and ammonia around an ammonium ion core, (mixed clusters) NH{sub 4}{sup +}(NH{sub 3}){sub n}(H{sub 2}O){sub m} (n+m=4). In each case, the spectra reveal well resolved structures that can be assigned to transitions arising from the vibrational motions of both the ion core of the clusters and the surrounding neutral solvent molecules. 154 refs., 19 figs., 8 tabs.

  19. Environmental assessment of the thermal neutron activation explosive detection system for concourse use at US airports

    SciTech Connect

    Jones, C.G.

    1990-08-01

    This document is an environmental assessment of a system designed to detect the presence of explosives in checked airline baggage or cargo. The system is meant to be installed at the concourse or lobby ticketing areas of US commercial airports and uses a sealed radioactive source of californium-252 to irradiate baggage items. The major impact of the use of this system arises from direct exposure of the public to scattered or leakage radiation from the source and to induced radioactivity in baggage items. Under normal operation and the most likely accident scenarios, the environmental impacts that would be created by the proposed licensing action would not be significant. 44 refs., 19 figs., 18 tabs.

  20. Analysis of health impact inputs to the US Department of Energy's risk information system

    SciTech Connect

    Droppo, J.G. Jr.; Buck, J.W.; Strenge, D.L.; Siegel, M.R.

    1990-08-01

    The US Department of Energy (DOE) is in the process of completing a survey of environmental problems, referred to as the Environmental Survey, at their facilities across the country. The DOE Risk Information System (RIS) is being used to prioritize these environmental problems identified in the Environmental Survey's findings. This report contains a discussion of site-specific public health risk parameters and the rationale for their inclusion in the RIS. These parameters are based on computed potential impacts obtained with the Multimedia Environmental Pollutant Assessment System (MEPAS). MEPAS is a computer-based methodology for evaluating the potential exposures resulting from multimedia environmental transport of hazardous materials. This report has three related objectives: document the role of MEPAS in the RIS framework, report the results of the analysis of alternative risk parameters that led to the current RIS risk parameters, and describe analysis of uncertainties in the risk-related parameters. 20 refs., 17 figs., 10 tabs.

  1. Script identification from images using cluster-based templates

    DOEpatents

    Hochberg, J.G.; Kelly, P.M.; Thomas, T.R.

    1998-12-01

    A computer-implemented method identifies a script used to create a document. A set of training documents for each script to be identified is scanned into the computer to store a series of exemplary images representing each script. Pixels forming the exemplary images are electronically processed to define a set of textual symbols corresponding to the exemplary images. Each textual symbol is assigned to a cluster of textual symbols that most closely represents the textual symbol. The cluster of textual symbols is processed to form a representative electronic template for each cluster. A document having a script to be identified is scanned into the computer to form one or more document images representing the script to be identified. Pixels forming the document images are electronically processed to define a set of document textual symbols corresponding to the document images. The set of document textual symbols is compared to the electronic templates to identify the script. 17 figs.

  2. The Robotic Edge Finishing Laboratory

    SciTech Connect

    Loucks, C.S.; Selleck, C.B.

    1990-08-01

    The Robotic Edge Finishing Laboratory at Sandia National Laboratories is developing four areas of technology required for automated deburring, chamfering, and blending of machined edges: (1) the automatic programming of robot trajectories and deburring processes using information derived from a CAD database, (2) the use of machine vision for locating the workpiece coupled with force control to ensure proper tool contact, (3) robotic deburring, blending, and machining of precision chamfered edges, and (4) in-process automated inspection of the formed edge. The Laboratory, its components, integration, and results from edge finishing experiments to date are described here. Also included is a discussion of the issues regarding implementation of the technology in a production environment. 24 refs., 17 figs.

  3. Prospects at high energies

    SciTech Connect

    Quigg, C.

    1988-11-01

    I discuss some possibilities for neutrino experiments in the fixed-target environment of the SPS, Tevatron, and UNK, with their primary proton beams of 0.4, 0.9, and 3.0 TeV. The emphasis is on unfinished business: issues that have been recognized for some time, but not yet resolved. Then I turn to prospects for proton-proton colliders to explore the 1-TeV scale. I review the motivation for new physics in the neighborhood of 1 TeV and mention some discovery possibilities for high-energy, high-luminosity hadron colliders and the implications they would have for neutrino physics. I raise the possibility of the direct study of neutrino interactions in hadron colliders. I close with a report on the status of the SSC project. 38 refs., 17 figs.

  4. Statistical evaluation of PACSTAT random number generation capabilities

    SciTech Connect

    Piepel, G.F.; Toland, M.R.; Harty, H.; Budden, M.J.; Bartley, C.L.

    1988-05-01

    This report summarizes the work performed in verifying the general purpose Monte Carlo driver-program PACSTAT. The main objective of the work was to verify the performance of PACSTAT's random number generation capabilities. Secondary objectives were to document (using controlled configuration management procedures) changes made in PACSTAT at Pacific Northwest Laboratory, and to assure that PACSTAT input and output files satisfy quality assurance traceability constraints. Upon receipt of the PRIME version of the PACSTAT code from the Basalt Waste Isolation Project, Pacific Northwest Laboratory staff converted the code to run on Digital Equipment Corporation (DEC) VAXs. The modifications to PACSTAT were implemented using the WITNESS configuration management system, with the modifications themselves intended to make the code as portable as possible. Certain modifications were made to make the PACSTAT input and output files conform to quality assurance traceability constraints. 10 refs., 17 figs., 6 tabs.

  5. System for monitoring an industrial process and determining sensor status

    DOEpatents

    Gross, K.C.; Hoyer, K.K.; Humenik, K.E.

    1995-10-17

    A method and system for monitoring an industrial process and a sensor are disclosed. The method and system include generating a first and second signal characteristic of an industrial process variable. One of the signals can be an artificial signal generated by an auto regressive moving average technique. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the two pairs of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test. 17 figs.

  6. TFTR: Present results and prospects for tritium operation

    SciTech Connect

    Furth, H.P.

    1989-08-01

    Experiments in TFTR are making contributions to several critical problem areas of tokamak reactor design. The magnitude of tokamak plasma transport is found to be sensitive to the shape of the density profile: central peaking may be advantageous for high-temperature tokamak confinement. For moderate-Q reactor operation, the present TFTR data base suffices to solve the three main steady-state reactor-plasma-physics problems of current drive, refueling, and impurity control. The achievement of high Q-values at high fusion power densities is being pursued in the economically promising direction of maximizing performance at moderate plasma current. In TFTR D-T plasmas, fusion reactions due to non-Maxwellian energetic-ion components will serve to generate alpha-particle populations of significant magnitude, permitting the near-term study of collective alpha-particle phenomena. 56 refs., 17 figs., 2 tabs.

  7. Large scale DNA microsequencing device

    DOEpatents

    Foote, R.S.

    1997-08-26

    A microminiature sequencing apparatus and method provide a means for simultaneously obtaining sequences of plural polynucleotide strands. The apparatus cosists of a microchip into which plural channels have been etched using standard lithographic procedures and chemical wet etching. The channels include a reaction well and a separating section. Enclosing the channels is accomplished by bonding a transparent cover plate over the apparatus. A first oligonucleotide strand is chemically affixed to the apparatus through an alkyl chain. Subsequent nucleotides are selected by complementary base pair bonding. A target nucleotide strand is used to produce a family of labelled sequencing strands in each channel which are separated in the separating section. During or following separation the sequences are determined using appropriate detection means. 17 figs.

  8. Heat-Flux Gage thermophosphor system

    SciTech Connect

    Tobin, K.W.

    1991-08-01

    This document describes the installation, hardware requirements, and application of the Heat-Flux Gage (Version 1.0) software package developed by the Oak Ridge National Laboratory, Applied Technology Division. The developed software is a single component of a thermographic phosphor-based temperature and heat-flux measurement system. The heat-flux transducer was developed by EG G Energy Measurements Systems and consists of a 1- by 1-in. polymethylpentene sheet coated on the front and back with a repeating thermographic phosphor pattern. The phosphor chosen for this application is gadolinium oxysulphide doped with terbium. This compound has a sensitive temperature response from 10 to 65.6{degree}C (50--150{degree}F) for the 415- and 490-nm spectral emission lines. 3 refs., 17 figs.

  9. Modeling of reflux condensation and countercurrent annular flow in a two-phase closed thermosyphon

    SciTech Connect

    Reed, J.G.; Tien, C.L.

    1985-12-01

    Reflux condensation in the steam generator tubes of a PWR is a potentially important heat removal mechanism during the cool-down phase following a small-break LOCA. This work studies reflux condensation using the two-phase closed thermosyphon as a model system. An analytical model based on control-volume formulations of mass, momentum, and energy balances for the liquid and vapor flows in each section of the device is developed. Numerical solutions to the system of governing equations are presented for both steady-state and transient operation of the device. While no data with which to compare the results of the transient analysis are currently available, the steady-state solutions compare well with available experimental data on flooding and film thickness. Thus, the analytical approach presented in this work is demonstrated to be a powerful technique for analyzing countercurrent, annular, two-phase flows. 17 refs., 17 figs.

  10. PC-1D installation manual and user's guide

    SciTech Connect

    Basore, P.A.

    1991-05-01

    PC-1D is a software package for personal computers that uses finite-element analysis to solve the fully-coupled two-carrier semiconductor transport equations in one dimension. This program is particularly useful for analyzing the performance of optoelectronic devices such as solar cells, but can be applied to any bipolar device whose carrier flows are primarily one-dimensional. This User's Guide provides the information necessary to install PC-1D, define a problem for solution, solve the problem, and examine the results. Example problems are presented which illustrate these steps. The physical models and numerical methods utilized are presented in detail. This document supports version 3.1 of PC-1D, which incorporates faster numerical algorithms with better convergence properties than previous versions of the program. 51 refs., 17 figs., 5 tabs.

  11. Modeling 1-D deflagration to detonation transition (DDT) in porous explosive

    SciTech Connect

    Weston, A.M.; Lee, E.L.

    1985-04-04

    A one-dimensional Lagrange hydrodynamic computer model is presented that describes gas flow, compaction, ignition, and deflagration processes in deformable porous beds. The model makes use of a consumable finite element cell that allows gas to flow through a compacting matrix. The model can be regarded as structural in the sense that the initial cell dimension is directly related to mean particle size. Experimental investigation of the DDT phenomenon are typically carried out using long thick-walled tubes filled with a granular porous bed of reactive material. In this configuration, much of the process can be described by flow in one dimension. We present calculations that simulate both squib initiated and piston initiated experiments on porous HMX to point out various observed features. Our purpose is to establish a basis for setting bounds on the physical parameters that describe such transient reaction processes. 16 refs., 17 figs., 1 tab.

  12. Hanford cultural resources management plan

    SciTech Connect

    Chatters, J.C.

    1989-06-01

    As a federal agency, the US Department of Energy (DOE) has been directed by Congress and the President to provide leadership in the preservation of prehistoric, historical, and cultural resources on lands it administers, to manage these in a spirit of stewardship for future generations, and to protect and preserve the rights of Native Americans to religious freedom. The purpose of this document is to describe how the DOE-Richland Operations (DOE-RL) will meet those responsibilities on the Hanford Site, pursuant to guidelines for Agency Responsibilities under the Historic Preservation Act (FR 53:31, February 17, 1988). This document is intended for multiple uses. Among other things, the text is designed as a manual for cultural resource managers to follow and as an explanation of the process of cultural resource regulatory compliance for the DOE-RL and Site contractors. 10 refs., 17 figs., 11 tabs.

  13. Velocity Measurements at Three Fish Screening Facilities in the Yakima Basin, Washington : Summer 1989 Annual Report.

    SciTech Connect

    Abernethy, C. Scott; Neitzel, Duane A.; Lusty, E. William

    1990-09-01

    The Pacific Northwest Laboratory (PNL) measured the velocity conditions at three fish screening facilities in the Yakima River Basin: Wapato, Chandler, and Easton Screens. The measurement objectives were different at the three screens. At Wapato, approach and sweep velocities were measured to evaluate the effect of rearing pens in the screen forebay. A complete survey was performed at the Chandler Screens. At Easton, velocity was measured behind the screens to provide information for the installation of porosity boards to balance flow through the screens. Salmon-rearing pens used at the Wapato Canal had a minimal effect on the magnitude of approach and sweep velocities at the face of the drum screens, although the pens caused increased turbulence and variability in water velocities. The net pens did not appear to affect flows through the three fish bypasses. 8 refs., 17 figs., 5 tabs.

  14. Environmental Survey preliminary report, Department of Energy (DOE) activities at Santa Susana Field Laboratories, Ventura County, California

    SciTech Connect

    Not Available

    1989-02-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) activities at the Santa Susana Field Laboratories Site (DOE/SSFL), conducted May 16 through 26, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual participants for the Survey team are being supplied by an private contractor. The objective of the survey is to identify environmental problems and areas of environmental risk associated with DOE activities at SSFL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at SSFL, and interviews with site personnel. 90 refs., 17 figs., 28 tabs.

  15. Hydrologic modeling to predict performance of shallow land burial cover designs at the Los Alamos National Laboratory

    SciTech Connect

    Nyhan, J.W.

    1989-03-01

    The water balance relationships of two shallow land burial (SLB) cover configurations were studied using a hydrologic model in a preliminary attempt to design waste disposal site covers for successful long-term closure at Los Alamos. Burial site performance requirements for site closure are first discussed, along with the role of hydrologic models in assessing the dynamics of the hydrology of the SLB cover. The calibration of a hydrologic model using field data from two SLB cover designs is then described, followed by an analysis of long-term climatic model input parameters across Los Alamos National Laboratory. These two calibrated models are then used to evaluate the influence of vegetation, precipitation, and runoff curve number on the design of SLB covers within Los Alamos county. Future directions of field research efforts and subsequent hydrologic modeling activities were recommended in terms of their usefulness for waste management decisions to be made at Los Alamos. 24 refs., 17 figs., 9 tabs.

  16. Seasonal cycle of the residual mean meridional circulation in the stratosphere

    SciTech Connect

    Rosenlof, K.H.

    1995-03-20

    The transformed Eulerian-mean (TEM) residual circulation is used to study the zonally averaged transport of mass in the stratosphere. The residual circulation is estimated from heating rates computed with a radiative transfer model using data from the Upper Atmosphere Research Satellite (UARS) as inputs. An annual cycle exists in the resulting circulation in the lower stratosphere, with a larger net upward mass flux across a pressure surface in the tropics during northern hemisphere winter than during northern hemisphere summer. The annual cycle in upward tropical mass flux follows the annual cycle in downward mass flux across a pressure surface in the northern hemisphere extratropics. It is argued that the annual cycle in zonal momentum forcing in the northern hemisphere stratosphere is controlling mass flux across a pressure surface in the lower stratosphere both in the tropics and in the northern hemisphere extratropics. 40 refs., 17 figs., 5 tabs.

  17. Coherent and spontaneous Raman spectroscopy in shocked and unshocked liquids

    SciTech Connect

    Schmidt, S.C.; Moore, D.S.; Schiferl, D.; Chatelet, M.; Turner, T.P.; Shaner, J.W.; Shampine, D.L.; Holt, W.T.

    1985-01-01

    Coherent and non-coherent Raman spectroscopy is being used to study the structure and energy transfer in molecular liquids at high pressures. Stimulated Raman scattering, coherent anti-Stokes Raman scattering, and Raman induced Kerr effect scattering measurements have been performed in liquid benzene and liquid nitromethane shocked to pressures up to 11 GPa. Frequency shifts were observed for the 992 cm/sup -1/ ring stretching mode of benzene and the 920 cm/sup -1/ CN stretching mode of nitromethane. Results of these dynamic experiments are compared to spontaneous Raman scattering measurements made in a high temperature diamond anvil cell. Also, a picosecond infrared pump/spontaneous anti-Strokes Raman probe experiment is being used to measure CH stretch vibrational relaxation times in liquid halogenated methanes statically compressed to a few tenths GPa. 87 refs., 17 figs.

  18. Techniques for estimating flood hydrographs for ungaged urban watersheds

    SciTech Connect

    Stricker, V.A.; Sauer, V.B.

    1982-04-01

    The Clark Method, modified slightly, was used to develop a synthetic dimensionless hydrograph that can be used to estimate flood hydrographs for ungaged urban watersheds. Application of the technique results in a typical (average) flood hydrograph for a given peak discharge. Input necessary to apply the technique is an estimate of basin lagtime and the recurrence interval peak discharge. Equations for this purpose were obtained from a recent nationwide study on flood frequency in urban watersheds. A regression equation was developed which relates flood volumes to drainage area size, basin lagtime, and peak discharge. This equation is useful where storage of floodwater may be a part of design or flood prevention. 6 refs., 17 figs., 5 tabs.

  19. Tests of the radiation hardness of VLSI Integrated Circuits and Silicon Strip Detectors for the SSC (Superconducting Super Collider) under neutron, proton, and gamma irradiation

    SciTech Connect

    Ziock, H.J.; Milner, C.; Sommer, W.F. ); Carteglia, N.; DeWitt, J.; Dorfan, D.; Hubbard, B.; Leslie, J.; O'Shaughnessy, K.F.; Pitzl, D.; Rowe, W.A.; Sadrozinski, H.F.W.; Seiden, A.; Spencer, E. . Inst. for Particle Physics); Ellison, J.A. ); Ferguson, P. ); Giubellino

    1990-01-01

    As part of a program to develop a silicon strip central tracking detector system for the Superconducting Super Collider (SSC) we are studying the effects of radiation damage in silicon detectors and their associated front-end readout electronics. We report on the results of neutron and proton irradiations at the Los Alamos National Laboratory (LANL) and {gamma}-ray irradiations at UC Santa Cruz (UCSC). Individual components on single-sided AC-coupled silicon strip detectors and on test structures were tested. Circuits fabricated in a radiation hard CMOS process and individual transistors fabricated using dielectric isolation bipolar technology were also studied. Results indicate that a silicon strip tracking detector system should have a lifetime of at least one decade at the SSC. 17 refs., 17 figs.

  20. The role of technology in reducing health care costs. Final project report

    SciTech Connect

    Sill, A.E.; Warren, S.; Dillinger, J.D.; Cloer, B.K.

    1997-08-01

    Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. This study was conducted by implementing both top-down and bottom-up strategies. The top-down approach used prosperity gaming methodology to identify future health care delivery needs. This effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements. The bottom-up approach identified and ranked interventional therapies employed in existing care delivery systems for a host of health-related conditions. Economic analysis formed the basis for development of care pathway interaction models for two of the most pervasive, chronic disease/disability conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Societal cost-benefit relationships based on these analyses were used to evaluate the effect of emerging technology in these treatment areas. 17 figs., 48 tabs.

  1. Asymmetrical field emitter

    DOEpatents

    Fleming, J.G.; Smith, B.K.

    1995-10-10

    A method is disclosed for providing a field emitter with an asymmetrical emitter structure having a very sharp tip in close proximity to its gate. One preferred embodiment of the present invention includes an asymmetrical emitter and a gate. The emitter having a tip and a side is coupled to a substrate. The gate is connected to a step in the substrate. The step has a top surface and a side wall that is substantially parallel to the side of the emitter. The tip of the emitter is in close proximity to the gate. The emitter is at an emitter potential, and the gate is at a gate potential such that with the two potentials at appropriate values, electrons are emitted from the emitter. In one embodiment, the gate is separated from the emitter by an oxide layer, and the emitter is etched anisotropically to form its tip and its asymmetrical structure. 17 figs.

  2. Biological production of fuels from coal-derived gases: Quarterly report, June 20, 1987-September 20, 1987

    SciTech Connect

    Not Available

    1987-01-01

    The technical feasibility of converting CO, H/sub 2/ and CO/sub 2/ from synthesis gas to ethanol and acetate has been demonstrated in a continuous stirred-tank reactor with both continuous gas and liquid feed. This report describes the equipment and procedures for continuous operation, as well as steady-state experiments carried out at three steady-state conditions. Although the operating conditions for continuous operation have not been optimized and a significant amount of acetate remains in the product stream, the feasibility of using a bacterial process for synthesis gas conversion to liquid fuels has been demonstrated. Future work during subsequent contracts should concentrate on producing a single liquid fuel as a product, increasing the product concentration, and defining and optimizing reaction conditions for maximizing, product yield. 3 refs., 17 figs.

  3. Compilation of poultry and egg parameters for the PATHWAY code

    SciTech Connect

    Ikenberry, T.A.

    1982-08-01

    The PATHWAY computer code was developed as a part of the foodchain pathway analysis task. The objective was to estimate radionuclide ingestion rates of residents of Lincoln (Nevada), Washington (Utah), and Iron (Utah) counties during the period 1951-1962, which resulted from explosion of nuclear devices at the Nevada Test Site (NTS). Estimation of radionuclide ingestion rates involves determination of radionuclide concentrations in dietary items as a function of time and geographic area, and consumption rates of such items as a function of age and lifestyle. Poultry and eggs may have been relatively significant dose contributors to humans, because of the fairly large consumption rates of these products, and because of potential radionuclide concentration in them. This paper describes nuclide-dependent and nuclide-independent parameters related to poultry products, and the determination of specific values of these parameters. 17 figs., 10 tabs.

  4. Underground barrier construction apparatus with soil-retaining shield

    DOEpatents

    Gardner, B.M.; Smith, A.M.; Hanson, R.W.; Hodges, R.T.

    1998-08-04

    An apparatus is described for building a horizontal underground barrier by cutting through soil and depositing a slurry, preferably one which cures into a hardened material. The apparatus includes a digging means for cutting and removing soil to create a void under the surface of the ground, a shield means for maintaining the void, and injection means for inserting barrier-forming material into the void. In one embodiment, the digging means is a continuous cutting chain. Mounted on the continuous cutting chain are cutter teeth for cutting through soil and discharge paddles for removing the loosened soil. This invention includes a barrier placement machine, a method for building an underground horizontal containment barrier using the barrier placement machine, and the underground containment system. Preferably the underground containment barrier goes underneath and around the site to be contained in a bathtub-type containment. 17 figs.

  5. The GNASH preequilibrium-statistical nuclear model code

    SciTech Connect

    Arthur, E. D.

    1988-01-01

    The following report is based on materials presented in a series of lectures at the International Center for Theoretical Physics, Trieste, which were designed to describe the GNASH preequilibrium statistical model code and its use. An overview is provided of the code with emphasis upon code's calculational capabilities and the theoretical models that have been implemented in it. Two sample problems are discussed, the first dealing with neutron reactions on /sup 58/Ni. the second illustrates the fission model capabilities implemented in the code and involves n + /sup 235/U reactions. Finally a description is provided of current theoretical model and code development underway. Examples of calculated results using these new capabilities are also given. 19 refs., 17 figs., 3 tabs.

  6. Impact of mechanical- and maintenance-induced failures of main reactor coolant pump seals on plant safety

    SciTech Connect

    Azarm, M A; Boccio, J L; Mitra, S

    1985-12-01

    This document presents an investigation of the safety impact resulting from mechanical- and maintenance-induced reactor coolant pump (RCP) seal failures in nuclear power plants. A data survey of the pump seal failures for existing nuclear power plants in the US from several available sources was performed. The annual frequency of pump seal failures in a nuclear power plant was estimated based on the concept of hazard rate and dependency evaluation. The conditional probability of various sizes of leak rates given seal failures was then evaluated. The safety impact of RCP seal failures, in terms of contribution to plant core-melt frequency, was also evaluated for three nuclear power plants. For leak rates below the normal makeup capacity and the impact of plant safety were discussed qualitatively, whereas for leak rates beyond the normal make up capacity, formal PRA methodologies were applied. 22 refs., 17 figs., 19 tabs.

  7. Integrated Project Management System description. [UMTRAP Project

    SciTech Connect

    Not Available

    1987-03-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project is a Department of Energy (DOE) designated Major System Acquisition (MSA). To execute and manage the Project mission successfully and to comply with the MSA requirements, the UMTRA Project Office ( Project Office'') has implemented and operates an Integrated Project Management System (IPMS). The Project Office is assisted by the Technical Assistance Contractor's (TAC) Project Integration and Control (PIC) Group in system operation. Each participant, in turn, provides critical input to system operation and reporting requirements. The IPMS provides a uniform structured approach for integrating the work of Project participants. It serves as a tool for planning and control, workload management, performance measurement, and specialized reporting within a standardized format. This system description presents the guidance for its operation. Appendices 1 and 2 contain definitions of commonly used terms and abbreviations and acronyms, respectively. 17 figs., 5 tabs.

  8. Repair, sidetrack, drilling, and completion of EE-2A for Phase 2 reservoir production service

    SciTech Connect

    Dreesen, D.S.; Cocks, G.G.; Nicholson, R.W.; Thomson, J.C.

    1989-08-01

    Hot Dry Rock (HDR) geothermal energy well EE-2 at Fenton Hill, New Mexico, was sidetracked and redrilled into the HDR Phase II reservoir after two unsuccessful attempts to repair damage in the lower wellbore. Before sidetracking was begun, six cement slurries were pumped to plug the abandoned lower wellbore and to support the production casing where drilling wear was predicted and where sidetracking was to occur. This work and the redrill of EE-2A were completed in November 1987. Specifications were prepared for a state-of-the-art tie-back casing, which was procured, manufactured, and delivered to Fenton Hill in May 1988. The well was then completed in June 1988 for hot-water production service by cementing in a liner and the upper section of production casing and installing and cementing a tie-back casing string. 24 refs., 17 figs., 5 tabs.

  9. Colonie Interim Storage Site annual site environmental report for calendar year 1989, Colonie, New York

    SciTech Connect

    Not Available

    1990-05-01

    IN 1984, Congress assigned the cleanup of the National Lead (NL) Industries site in Colonie, New York, to the Department of Energy (DOE) as part of a decontamination research and development project under the 1984 Energy and Water Appropriations Act. DOE then included the site in the Formerly Utilized Sites Remedial Action Program (FUSRAP), an existing DOE program to decontaminate or otherwise control sites where residual radioactive materials remain for the early years of the nation's atomic energy program. DOE instituted an environmental monitoring program at the site in 1984. Results are presented annually in reports such as this. Under FUSRAP, the first environmental monitoring report for this site presented data for calendar year 1984. This report presents the findings of the environmental monitoring program conducted during calendar year 1989. 16 refs., 17 figs., 14 tabs.

  10. The role of accelerators in the nuclear fuel cycle

    SciTech Connect

    Takahashi, Hiroshi.

    1990-01-01

    The use of neutrons produced by the medium energy proton accelerator (1 GeV--3 GeV) has considerable potential in reconstructing the nuclear fuel cycle. About 1.5 {approximately} 2.5 ton of fissile material can be produced annually by injecting a 450 MW proton beam directly into fertile materials. A source of neutrons, produced by a proton beam, to supply subcritical reactors could alleviate many of the safety problems associated with critical assemblies, such as positive reactivity coefficients due to coolant voiding. The transient power of the target can be swiftly controlled by controlling the power of the proton beam. Also, the use of a proton beam would allow more flexibility in the choice of fuel and structural materials which otherwise might reduce the reactivity of reactors. This paper discusses the rate of accelerators in the transmutation of radioactive wastes of the nuclear fuel cycles. 34 refs., 17 figs., 9 tabs.

  11. Real-time neural network earthquake profile predictor

    DOEpatents

    Leach, R.R.; Dowla, F.U.

    1996-02-06

    A neural network has been developed that uses first-arrival energy to predict the characteristics of impending earthquake seismograph signals. The propagation of ground motion energy through the earth is a highly nonlinear function. This is due to different forms of ground motion as well as to changes in the elastic properties of the media throughout the propagation path. The neural network is trained using seismogram data from earthquakes. Presented with a previously unseen earthquake, the neural network produces a profile of the complete earthquake signal using data from the first seconds of the signal. This offers a significant advance in the real-time monitoring, warning, and subsequent hazard minimization of catastrophic ground motion. 17 figs.

  12. Hypervelocity plate acceleration

    SciTech Connect

    Marsh, S.P.; Tan, T.H.

    1991-01-01

    Shock tubes have been used to accelerate 1.5-mm-thick stainless steel plates to high velocity while retaining their integrity. The fast shock tubes are 5.1-cm-diameter, 15.2-cm-long cylinders of PBX-9501 explosive containing a 1.1-cm-diameter cylindrical core of low-density polystyrene foam. The plates have been placed directly in contact with one face of the explosive system. Plane-wave detonation was initiated on the opposite face. A Mach disk was formed in the imploding styrofoam core, which provided the impulse required to accelerate the metal plate to high velocity. Parametric studies were made on this system to find the effect of varying plate metal, plate thickness, foam properties, and addition of a barrel. A maximum plate velocity of 9.0 km/s has been observed. 6 refs., 17 figs.

  13. Report on environmental effects at Yuma Proving Ground from continued testing of projectiles containing beryllium and depleted uranium

    SciTech Connect

    Shinn, J.H.; Sharmer, L.A.; Cederwall, R.T.; Novo, M.G.; Mitchell, C.S.

    1988-02-01

    The purpose of this report is to determine, from the available information, the potential environmental effects at Yuma Proving Ground (YPG), resulting from further testing of surface-burst artillery projectiles (XM785) containing amounts of beryllium (Be) and depleted uranium (DU). A model was applied to assess the downwind deposition and air concentrations of Be and DU during actual tests with the XM753 and XM785 at YPG. In addition, one single, static test of an XM785 was conducted at Tonopah Test Range. The potential effects of continued testing of devices such as the XM753 and XM785 appear to be insignificant, providing that prudent mitigations and environmental management practices are carried out. 44 refs., 17 figs., 11 tabs.

  14. Spawning and abundance of fall chinook salmon (Oncorhynchus tshawytscha) in the Hanford Reach of the Columbia River, 1948--1988

    SciTech Connect

    Dauble, D.D.; Watson, D.G.

    1990-03-01

    The Hanford Reach of the Columbia River provides the only major spawning habitat for the upriver bright (URB) race of fall chinook salmon in the mainstem Columbia River. Hanford Site biologists have conducted aerial surveys of spawning salmon in the Hanford Reach since 1948. This report summarizes data on fall chinook salmon spawning in the Hanford Reach and presents a discussion of factors that may affect population trends. Most data are limited to fisheries agency reports and other working documents. Fisheries management practices in the Columbia River system have changed rapidly over the last decade, particularly under requirements of the Pacific Northwest Power Planning and Conservation Act of 1980. New information has been generated and included in this report. 75 refs., 17 figs., 11 tabs.

  15. Causes of instability at LaSalle and consequences from postulated scram failure

    SciTech Connect

    Wulff, W.; Cheng, H.S.; Mallen, A.N.

    1990-01-01

    The March 9, 1988 instability event at the LaSalle County-2 BWR power plant was simulated on the BNL Engineering Plant Analyzer (EPA) in order to assess its ability to simulate oscillatory transients, to identify the causes of the instability, to determine the maximum power amplitude of limit-cycle oscillations after postulated scram failure and to rank leading modeling parameters which affect instability. The EPA was found capable of simulating the LaSalle instability, which was found to have been caused by the combination of low core flow, moderately high power, low feedwater temperature and strong bottom power peaking. After postulated scram failure, the power was found to peak at 1300% of normal full power. Void reactivity, power peaking and core exit flow impedance were found to be the leading phenomena affecting thermohydraulic instability. 3 refs. 17 figs., 3 tabs.

  16. Apparatus and method for sealing perforated well casing

    DOEpatents

    Blount, C.G.; Benham, R.A.; Brock, J.L.; Emerson, J.A.; Ferguson, K.R.; Scheve, D.F.; Schmidt, J.H.; Schuler, K.W.; Stanton, P.L.

    1997-03-25

    Perforations and other openings in well casings, liners and other conduits may be substantially blocked or sealed to prevent fluid flow between the casing or liner interior and an earth formation by placing a radially expansible sleeve adjacent the perforations or openings and urging the sleeve into forcible engagement with the casing or inner wall using an explosive charge. An apparatus including a radially contracted sleeve formed by a coiled plate member or a tubular member having flutes defined by external and internal folds, may be deployed into a well casing or liner through a production or injection tubing string and on the end of a flexible cable or coilable tubing. An explosive charge disposed on the apparatus and within the sleeve may be detonated to urge the sleeve into forcible engagement with the casing inner wall. 17 figs.

  17. Mechanism of failure of two pyrotechnic components

    SciTech Connect

    Munger, A.C.; Woods, C.M.

    1985-01-01

    An investigation of two unrelated pyrotechnic test device misfires revealed an ignition phenomenon that helps to explain the well-known necessity of maintaining good integrity between bridgewire and powder in hot-wire devices that use insensitive pyrotechnic powders. The factor common to both devices was the TiH/sub 1.65/:KC10/sub 4/ in a 33:67 weight percent ratio. This material is being used because of its high static insensitivity, a characteristic that makes good bridgewire contact mandatory for reliable ignition. Extensive work with a scanning electron microscope revealed that not only does the bridgewire require entrapment, but the initiation reaction gases must be contained within the immediate vicinity of the bridgewire or the initiation will not be sustained. Evidence is presented to document the phenomenon that caused the misfire of both components that were investigated. 9 refs., 17 figs.

  18. System for monitoring an industrial process and determining sensor status

    DOEpatents

    Gross, K.C.; Hoyer, K.K.; Humenik, K.E.

    1997-05-13

    A method and system are disclosed for monitoring an industrial process and a sensor. The method and system include generating a first and second signal characteristic of an industrial process variable. One of the signals can be an artificial signal generated by an auto regressive moving average technique. After obtaining two signals associated with one physical variable, a difference function is obtained by determining the arithmetic difference between the two pairs of signals over time. A frequency domain transformation is made of the difference function to obtain Fourier modes describing a composite function. A residual function is obtained by subtracting the composite function from the difference function and the residual function (free of nonwhite noise) is analyzed by a statistical probability ratio test. 17 figs.

  19. Tone signal generator for producing multioperator tone signals using an operator circuit including a waveform generator, a selector and an enveloper

    DOEpatents

    Dong, Q.; Jenkins, M.V.; Bernadas, S.R.

    1997-09-09

    A frequency modulation (FM) tone signal generator for generating a FM tone signal is disclosed. The tone signal generator includes a waveform generator having a plurality of wave tables, a selector and an enveloper. The waveform generator furnishes a waveform signal in response to a phase angle address signal. Each wave table stores a different waveform. The selector selects one of the wave tables in response to a plurality of selection signals such that the selected wave table largely provides the waveform signal upon being addressed largely by the phase angle address signal. Selection of the selected wave table varies with each selection signal. The enveloper impresses an envelope signal on the waveform signal. The envelope signal is used as a carrier or modulator for generating the FM tone signal. 17 figs.

  20. Toughening of epoxy resins by epoxidized soybean oil

    SciTech Connect

    Frischinger, I.; Dirlikov, S.

    1993-12-31

    Homogeneous mixtures of a liquid rubber based on prepolymers of epoxidized soybean oil with amines, diglycidyl ether of bisphenol A epoxy resins, and commercial diamines form, under certain conditions, two-phase thermosetting materials that consist of a rigid epoxy matrix and randomly distributed small rubbery soybean particles (0.1-5 {mu}m). These two-phase thermosets have improved toughness, similar to that of other rubber-modified epoxies, low water absorption, and low sodium content. In comparison to the unmodified thermosets, the two-phase thermosets exhibit slightly lower glass-transition temperatures and Young`s moduli, but their dielectric properties do not change. The epoxidized soybean oil is available at a price below that of commercial epoxy resins and appears very attractive for epoxy toughening on an industrial scale. 15 refs., 17 figs., 6 tabs.

  1. R5FORCE/MOD3s: A program to compute fluid induced forces using hydrodynamic output from the RELAP5/MOD3 code

    SciTech Connect

    Watkins, J.C.

    1990-09-01

    This report describes an update of a computer program which operates on hydrodynamic output from the RELAPS/MOD3 program and computes piping hydrodynamic force/time histories for input into various structural analysis codes. This version of the program is compatible with RELAPS/MOD3 and the Micro Vax computing environment whereas an earlier version of the program was compatible with RELAPS/MOD1. The report describes the force calculation theory, showing the development of a general force equation and the solution of this equation within the RELAPS output structure. To illustrate the calculational method and provide results for discussion, a sample problem is presented. A detailed user manual for the computer program is included as an appendix. 10 refs., 17 figs.

  2. Core analysis in a low permeability sandstone reservoir: Results from the Multiwell Experiment

    SciTech Connect

    Sattler, A.R.

    1989-04-01

    Over 4100 ft (1100 ft oriented) of Mesaverde core was taken during the drilling of the three Multiwell Experiment (MWX) wells, for study in a comprehensive core analysis program. This core traversed five separate depositional environments (shoreline/marine, coastal, paludal, fluvial, and paralic), and almost every major sand in the Mesaverde at the site was sampled. This paper summarizes MWX core analysis and describes the petrophysical properties at the MWX site; reservoir parameters, including permeabilities of naturally fractured core; and mechanical rock properties including stress-related measurements. Some correlations are made between reservoir properties and mineralogy/petrology data. Comparisons are made between the properties of lenticular and blanket sandstone morphologies existing at the site. This paper provides an overview of a complete core analysis in a low-permeability sandstone reservoir. 66 refs., 17 figs. , 9 tabs.

  3. Computerized training management system

    DOEpatents

    Rice, H.B.; McNair, R.C.; White, K.; Maugeri, T.

    1998-08-04

    A Computerized Training Management System (CTMS) is disclosed for providing a procedurally defined process that is employed to develop accreditable performance based training programs for job classifications that are sensitive to documented regulations and technical information. CTMS is a database that links information needed to maintain a five-phase approach to training-analysis, design, development, implementation, and evaluation independent of training program design. CTMS is designed using R-Base{trademark}, an-SQL compliant software platform. Information is logically entered and linked in CTMS. Each task is linked directly to a performance objective, which, in turn, is linked directly to a learning objective; then, each enabling objective is linked to its respective test items. In addition, tasks, performance objectives, enabling objectives, and test items are linked to their associated reference documents. CTMS keeps all information up to date since it automatically sorts, files and links all data; CTMS includes key word and reference document searches. 18 figs.

  4. Compilation of current literature on seals, closures, and leakage for radioactive material packagings

    SciTech Connect

    Warrant, M.M.; Ottinger, C.A.

    1989-01-01

    This report presents an overview of the features that affect the sealing capability of radioactive material packagings currently certified by the US Nuclear Regulatory Commission. The report is based on a review of current literature on seals, closures, and leakage for radioactive material packagings. Federal regulations that relate to the sealing capability of radioactive material packagings, as well as basic equations for leakage calculations and some of the available leakage test procedures are presented. The factors which affect the sealing capability of a closure, including the properties of the sealing surfaces, the gasket material, the closure method and the contents are discussed in qualitative terms. Information on the general properties of both elastomer and metal gasket materials and some specific designs are presented. A summary of the seal material, closure method, and leakage tests for currently certified packagings with large diameter seals is provided. 18 figs., 9 tabs.

  5. Velocity Measurements at Six Fish Screening Facilities in the Yakima River Basin, Washington, Summer 1988 : Annual Report.

    SciTech Connect

    Abernethy, C. Scott; Neitzel, Duane A.; Lusty, E. William

    1989-11-01

    The Bonneville Power Administration (BPA), the United States Bureau of Reclamation (USSR), and the Washington State Department of Ecology (WDOE) are funding the construction and evaluation of fish passage facilities and fish protection facilities at irrigation and hydroelectric diversions in the Yakima River Basin, Washington State. The program provides offsite enhancement to compensate for fish and wildlife losses caused by hydroelectric development throughout the Columbia River Basin, and addresses natural propagation of salmon to help mitigate the impact of irrigation in the Yakima River Basin. This report evaluates the flow characteristics of the screening facilities. Studies consisted of velocity measurements taken in front of the rotary drum screens and within the fish bypass systems during peak flows. Measurements of approach velocity and sweep velocity were emphasized in these studies; however, vertical velocity was also measured. 5 refs., 18 figs., 15 tabs.

  6. Growth, yield and plant water relationships in sweet potatoes in response to carbon dioxide enrichment: Progress report

    SciTech Connect

    Not Available

    1986-01-01

    In the summer of 1985, under the joint program of US Department of Energy, Carbon Dioxide Division, and Tuskegee University, experiments were conducted to study growth, yield, photosynthesis and plant water relationships in sweet potato plants grown in an enriched CO/sub 2/ environment. The main experiment utilized open top chambers to study the effects of CO/sub 2/ and soil moisture on growth, yield and photosynthesis of field-grown plants. In addition, potted plants in open top chambers were utilized in a study of the effects of different CO/sub 2/ concentrations on growth pattern, relative growth rate, net assimilation rate and biomass increment at different stages of development. The interaction effects of enriched CO/sub 2/ and water stress on biomass production, yield, xylem potential, and stomatal conductance were also investigated. 29 refs., 18 figs., 41 tabs.

  7. A parallel numerical simulation for supersonic flows using zonal overlapped grids and local time steps for common and distributed memory multiprocessors

    SciTech Connect

    Patel, N.R.; Sturek, W.B.; Hiromoto, R.

    1989-01-01

    Parallel Navier-Stokes codes are developed to solve both two- dimensional and three-dimensional flow fields in and around ramjet and nose tip configurations. A multi-zone overlapped grid technique is used to extend an explicit finite-difference method to more complicated geometries. Parallel implementations are developed for execution on both distributed and common-memory multiprocessor architectures. For the steady-state solutions, the use of the local time-step method has the inherent advantage of reducing the communications overhead commonly incurred by parallel implementations. Computational results of the codes are given for a series of test problems. The parallel partitioning of computational zones is also discussed. 5 refs., 18 figs.

  8. Composite polymer: Glass edge cladding for laser disks

    DOEpatents

    Powell, H.T.; Wolfe, C.A.; Campbell, J.H.; Murray, J.E.; Riley, M.O.; Lyon, R.E.; Jessop, E.S.

    1987-11-02

    Large neodymium glass laser disks for disk amplifiers such as those used in the Nova laser require an edge cladding which absorbs at 1 micrometer. This cladding prevents edge reflections from causing parasitic oscillations which would otherwise deplete the gain. Nova now utilizes volume-absorbing monolithic-glass claddings which are fused at high temperature to the disks. These perform quite well but are expensive to produce. Absorbing glass strips are adhesively bonded to the edges of polygonal disks using a bonding agent whose index of refraction matches that of both the laser and absorbing glass. Optical finishing occurs after the strips are attached. Laser disks constructed with such claddings have shown identical gain performance to the previous Nova disks and have been tested for hundreds of shots without significant degradation. 18 figs.

  9. Hydrogeology of parts of the Central Platte and Lower Loup Natural Resources Districts, Nebraska

    SciTech Connect

    Peckenpaugh, J.M.; Dugan, J.T.

    1983-01-01

    Water-level declines of at least 15 feet have occurred in this heavily irrigated area of central Nebraska since the early 1930's, and potential for additional declines is high. To test the effects of additional irrigation development on water levels and streamflow in the area, computer programs were developed that represent the surface-water system, soil zone, and saturated zone of the hydrogeologic system. A two-dimensional, finite difference ground-water flow model of the 3374 square-mile study area was developed and calibrated using steady-state and transient conditions, and three management alternatives were examined. Results indicate that significant additional water-level declines will occur even if there is no additional ground-water development. 35 refs., 18 figs., 22 tabs.

  10. Surface enhanced Raman gene probe and methods thereof

    DOEpatents

    Vo-Dinh, T.

    1998-02-24

    The subject invention disclosed is a new gene probe biosensor and methods based on surface enhanced Raman scattering (SERS) label detection. The SER gene probe biosensor comprises a support means, a SER gene probe having at least one oligonucleotide strand labeled with at least one SERS label, and a SERS active substrate disposed on the support means and having at least one of the SER gene probes adsorbed thereon. Biotargets such as bacterial and viral DNA, RNA and PNA are detected using a SER gene probe via hybridization to oligonucleotide strands complementary to the SER gene probe. The support means includes a fiberoptic probe, an array of fiberoptic probes for performance of multiple assays and a waveguide microsensor array with charge-coupled devices or photodiode arrays. 18 figs.

  11. Review of wire chamber aging

    SciTech Connect

    Va'Vra, J.

    1986-02-01

    This paper makes an overview of the wire chamber aging problems as a function of various chamber design parameters. It emphasizes the chemistry point of view and many examples are drawn from the plasma chemistry field as a guidance for a possible effort in the wire chamber field. The paper emphasizes the necessity of variable tuning, the importance of purity of the wire chamber environment, as well as it provides a practical list of presently known recommendations. In addition, several models of the wire chamber aging are qualitatively discussed. The paper is based on a summary talk given at the Wire Chamber Aging Workshop held at LBL, Berkeley on January 16-17, 1986. Presented also at Wire Chamber Conference, Vienna, February 25-28, 1986. 74 refs., 18 figs., 11 tabs.

  12. Confirmatory sediment analyses and solid and suspended particulate phase bioassays on sediment from Oakland Inner Harbor, San Francisco, California

    SciTech Connect

    Word, J.Q.; Ward, J.A.; Apts, C.W.; Woodruff, D.L.; Barrows, M.E.; Cullinan, V.I.; Hyland, J.L.; Campbell, J.F.

    1988-12-01

    The US Army Corps of Engineers (USACE), San Francisco District, was authorized by the US Congress to deepen the navigation channels of Inner and Outer Oakland Harbor, California. During review of the environmental impact statement required for this dredging and disposal project, a panel of national experts approved the open-water disposal of dredged sediment from selected areas within the Inner Harbor, subject to results of confirmatory solid phase bioassays. The San Francisco District of the Corps requested the Battle/Marine Sciences Laboratory (MSL) to conduct these confirmatory studies. The studies provided technical data for an evaluation of the potential environmental impact of this project. Within extremely narrow time constraints, these studies provided chemical and biological information required by ocean dumping regulations to determine suitability of the Oakland Inner Harbor and turning basin sediment for ocean disposal. 23 refs., 18 figs., 45 tabs.

  13. Monitoring of Olympic National Park Beaches to determine fate and effects of spilled bunker C fuel oil

    SciTech Connect

    Strand, J.A.; Cullinan, V.I.; Crecelius, E.A.; Fortman, T.J.; Citterman, R.J.; Fleischmann, M.L.

    1990-10-01

    On December 23, 1988, the barge Nestucca was accidentally struck by its tow, a Souse Brothers Towing Company tug, releasing approximately 230,000 gallons of Bunker C fuel oil and fouling beaches from Grays Harbor north to Vancouver Island. Affected beaches in Washington included a 40-mile-long strip that has been recently added to Olympic National Park. The purpose of the monitoring program documented in this report was to determine the fate of spilled Bunker C fuel oil on selected Washington coastal beaches. We sought to determine (1) how much oil remained in intertidal and shallow subtidal habitats following clean-up and weathering, (2) to what extent intertidal and/or shallow subtidal biotic assemblages have been contaminated, and (3) how rapidly the oil has left the ecosystem. 45 refs., 18 figs., 8 tabs.

  14. Model calculations and experimental measurements of the response of HMX porous beds to deflagration and shock

    SciTech Connect

    Aldis, D.F.; Lee, E.L.; Simpson, R.L.; Weston, A.M.

    1989-08-04

    The experimental research on the response of porous beds of HMX has yielded a body of evidence which includes accurate measurements of gas flow, compaction ratio, detonation transit distance and time. As the experimental research has progressed, we have developed a 1D numerical model (1DUCT) to describe this response in a special hydrodynamic code in which the gas phase is allowed to flow through a solid phase. Gas phase relative velocity is limited to be subsonic. In addition we have developed special constitutive and fluid EOS models (2DUCT) for use with the 2D Lagrange hydrocode, DYNA2D, in which there is no cell to cell gas phase mass transfer. Our study strategy was to analyze several, very different experiments to derive values of phenomenological parameters in the model. These experiments include squib ignited events where relative gas flow is important and compression ignition tests where it is not. 26 refs., 18 figs.

  15. Transport calculations for nuclear analyses: Theory and guidelines for effective use of transport codes

    SciTech Connect

    O'Dell, R.D.; Alcouffe, R.E.

    1987-09-01

    This report is for the serious user of discrete ordinates transport computer codes for performing nuclear analysis calculations. The first section after the introduction provides a reasonably thorough mathematical description of the analytic Boltzmann transport equation. Next is a section on the numerical discretization of the energy, angle, and space variables in the transport equation, along with an introduction to the source iteration method. The fourth section provides numerical details and features pertinent to discrete ordinates codes. That section details angular quadrature, spatial discretization methods, iteration acceleration methods, and search capabilities. The fifth section presents considerations in choosing a discrete ordinates code for use, and this is followed by a section on typical discrete ordinates codes available throughout the world. The report ends with some guidance for the user. 73 refs., 18 figs., 13 tabs.

  16. Towards an amplitude analysis of exclusive. gamma gamma. processes

    SciTech Connect

    Pennington, M.R.

    1988-06-01

    The potential of two photon processes to shed light on the parton content of resonances, we maintain, can only be realized in practice by moving towards an Amplitude Analysis of experimental data. By using the process ..gamma gamma.. ..-->.. ..pi pi.. as an example, the way to do this is discussed. Presently claimed uncertainties in the ..gamma gamma.. width of even the well-known f/sub 2/ (1270) are shown to be over-optimistic and the fitted couplings of the overlapping scalar states in the 1 GeV region meaningless. Only the use of Amplitude Analysis techniques on the new higher statistics data from SLAC and DESY can resolve these uncertainties and lead to definite and significant results. 37 refs., 18 figs.

  17. Low altitude high speed cargo parachute system development: A status report

    SciTech Connect

    Sundberg, W.D.; Alsbrooks, T.H.; Ronquillo, K.L. ); Sadeck, J.E.; Lee, C.K. )

    1991-01-01

    A Low Altitude High Speed Cargo (LAHSC) parachute is being developed for deployment at velocities up to 250 knots at 300 ft altitude. The LAHSC parachute will decelerate and turnover a load to a 40 to 60 ft/sec vertical velocity at first vertical at approximately 30 ft AGL. The acceleration limit is 5 g's. Main chute cargo extraction will be necessary. A single parachute will be utilized for a 7500 lb load, and clusters will be used for larger loads. The 64-gore, 70-ft-dia parachute has a ring-slot/solid construction with a flare at the skirt to aid the inflation. This paper describes the parachute, the design process and testing to date. Model parachutes have been tested in wind tunnels and in free flight. A single full-scale parachute has been tested at low speeds with conventional load extraction, and with a vertical trajectory at deployment. 5 refs., 18 figs., 3 tabs.

  18. Compact acoustic refrigerator

    DOEpatents

    Bennett, G.A.

    1992-11-24

    A compact acoustic refrigeration system actively cools components, e.g., electrical circuits, in a borehole environment. An acoustic engine includes first thermodynamic elements for generating a standing acoustic wave in a selected medium. An acoustic refrigerator includes second thermodynamic elements located in the standing wave for generating a relatively cold temperature at a first end of the second thermodynamic elements and a relatively hot temperature at a second end of the second thermodynamic elements. A resonator volume cooperates with the first and second thermodynamic elements to support the standing wave. To accommodate the high heat fluxes required for heat transfer to/from the first and second thermodynamic elements, first heat pipes transfer heat from the heat load to the second thermodynamic elements and second heat pipes transfer heat from first and second thermodynamic elements to the borehole environment. 18 figs.

  19. Application of a damage model for rock fragmentation to the Straight Creek Mine blast experiments

    SciTech Connect

    Thorne, B.J.

    1991-09-01

    Early attempts at estimation of stress wave damage due to blasting by use of finite element calculations met with limited success due to numerical instabilities that prevented calculations from being carried past the fragmentation limit. More recently, the improved damage model PRONTO has allowed finite element calculations which remain stable and yield good agreement between calculated fragmented regions and excavated crater profiles for blasting experiments in granite. Application of this damage model to blast experiments at the Straight Creek Mine in Bell County, Kentucky were complicated by anisotropic conditions and uncertainties in material properties. It appears that significant modifications to the damage model and extensive material testing may be necessary in order to estimate damage in these anisotropic materials. 18 refs., 18 figs.

  20. Recommendations report for the platanares geothermal site, Department of Copan, Honduras. Reporte de recomendaciones para el sitio geotermico de platanares, Departamento de Copan, Honduras

    SciTech Connect

    Not Available

    1988-11-01

    A geothermal assessment of six previously identified sites in Honduras has been conducted by a team comprised of staff from the Los Alamos National Laboratory, the US Geological Survey, and the Empresa Nacional de Energia Electrica. The application of both reconnaissance and detailed scale techniques lead to the selection of Platanares in the Department of Copan as the highest potential site. Additional work resulted in the completion of a prefeasibility study at Platanares. We present here a tabulation of the work completed and short summaries of the results from these technical studies. We also present a brief model of the geothermal system and recommendations for additional feasibility work. Both English and Spanish versions of this report are provided in the same document. 18 figs., 5 tabs.

  1. Introduction to string and superstring theory II

    SciTech Connect

    Peskin, M.E.

    1987-03-01

    Conformal field theory is reviewed, then conformal invariance is used to rederive the basic results on the embedding dimensionality for bosonic and fermionic strings. The spectrum of the bosonic and the computation of scattering amplitudes are discussed. The formalism used is extended to clarify the origin of Yang-Mills gauge invariance in the open bosonic string theory. The question of the general-coordinate gauge invariance of string theory is addressed, presenting two disparate viewpoints on this question. A brief introduction is then given of the reduction from the idealized string theory in 10 extended dimensions to more realistic solutions in which all but 4 of these dimensions are compactified. The state of knowledge about the space-time supersymmetry of the superstring from the covariant viewpoint is outlined. An approach for identifying possible 6-dimensional spaces which might represent the form of the compact dimensions is discussed, and the orbifold scheme of compactification is presented. 77 refs., 18 figs. (LEW)

  2. Chemically prepared varistor material for lightning arrestor connector application; Final report

    SciTech Connect

    Washington, W.; Goy, D.M.

    1989-08-30

    Chemically prepared (chem-prep) varistor material was evaluated as a possible replacement for mixed oxide material in varistor particle Lightning Arrestor Connectors (LACs). Chem-prep varistor materials were considered in the production of LACs for two reasons: (1) better production yields than the present mixed oxide materials as a result of controlled particle size, homogeneous mixing, and minimal in-process contamination; and (2) improved insulation resistance. The preparation of varistor material using chemical synthesis has proven to be successful in high-field varistors. The electrical properties can be set by adjusting the processing parameters, and the results can be reproduced. This suggests that new LAC material may be produced also using the chem-prep method. Based on initial studies, which included an evaluation of processing and electrical characterization, the chem-prep material showed very good promise as a replacement for the current LAC material. 1 ref., 18 figs., 16 tabs.

  3. Sidewall flow instabilities in liquid metal MHD flow under blanket relevant conditions

    SciTech Connect

    Reed, C.B.; Picologlou, B.F.

    1988-10-07

    A flow instability has been observed in a rectangular thin conducting wall duct in MHD experiments at ANL's ALEX facility. It developed in a side layer jet attached to a side wall parallel to the applied B-field. The nature of the instability resembles very strongly that of a classic laminar instability in ordinary fluid mechanics. The phenomenon is distinguished from ordinary turbulence by its strong periodicity and its lack of small scale structure. A preliminary identification of the factors which may influence the instability has been made. For the conditions and test section geometry reported here, the instability appears at an approximately constant critical Reynolds number 2650 < Re/sub cr/ < 5100, independent of Hartmann number in the range 2700 < M < 5400. 6 refs., 18 figs.

  4. Apparatus for improved DNA sequencing

    DOEpatents

    Douthart, R.J.; Crowell, S.L.

    1996-05-07

    This invention is a means for the rapid sequencing of DNA samples. More specifically, it consists of a new design direct blotting electrophoresis unit. The DNA sequence is deposited on a membrane attached to a rotating drum. Initial data compaction is facilitated by the use of a machined multi-channeled plate called a ribbon channel plate. Each channel is an isolated mini gel system much like a gel filled capillary. The system as a whole, however, is in a slab gel like format with the advantages of uniformity and easy reusability. The system can be used in different embodiments. The drum system is unique in that after deposition the drum rotates the deposited DNA into a large non-buffer open space where processing and detection can occur. The drum can also be removed in toto to special workstations for downstream processing, multiplexing and detection. 18 figs.

  5. Feed rate measuring method and system

    DOEpatents

    Novak, J.L.; Wiczer, J.J.

    1995-12-05

    A system and method are provided for establishing the feed rate of a workpiece along a feed path with respect to a machine device. First and second sensors each having first and second sensing electrodes which are electrically isolated from the workpiece are positioned above, and in proximity to the desired surfaces of the workpiece along a feed path. An electric field is developed between the first and second sensing electrodes of each sensor and capacitance signals are developed which are indicative of the contour of the workpiece. First and second image signals representative of the contour of the workpiece along the feed path are developed by an image processor. The time delay between corresponding portions of the first and second image signals are then used to determine the feed rate based upon the separation of the first and second sensors and the amount of time between corresponding portions of the first and second image signals. 18 figs.

  6. Superworlds/hyperworlds

    SciTech Connect

    Peskin, M.E.

    1986-03-01

    Some simple exercises are carried out which clarify the physics of a 5-dimensional world in which one dimension is curled up to a radius R. A technical problem necessary to generalize this discussion to d dimensions is considered - the determination of the sizes of spinors in higher dimensions. The origin of eigenmodes of a higher-dimensional field with exactly zero energy is explored, using as examples conventional models of field theory. General relativity is then reviewed, formulated as a gauge theory. The conditions for the appearance of zero modes in space-time geometries with compactified dimensions are discussed. The physics of these zero modes are illustrated in a series of examples ranging from the original construction of Kaluza and Klein to the superstring theory. 28 refs., 18 figs. (LEW)

  7. Intimations of neck formation in heavy-ion subbarrier fusion reactions

    SciTech Connect

    Stelson, P.H.

    1990-07-01

    Since the observed fusion cross sections for collisions between heavy ions at subbarrier energies are orders of magnitude larger than would be expected for barrier tunnelling, one is faced with the task of identifying the basic force which is strong enough to overcome the strong Coulomb force and bring about fusion. The two possibilities seem to be excursions of the nuclear surface (and strong nuclear force) due to collective motions of the colliding nuclei and formation of a neck of nuclear matter. The first possibility has received the most attention. However, the systematics of fusion cross sections suggest neck formation is playing an important role. Neck formation can also result in a reseparation of the composite system and we review the experimental information on these reactions at barrier and subbarrier energies. 15 refs., 18 figs.

  8. Decadal climate variability over the North Pacific and North America: Dynamics and predictability

    SciTech Connect

    Latif, M.; Barnett, T.P.

    1996-10-01

    The dynamics and predictability of decadal climate variability over the North Pacific and North America are investigated by analyzing various observation datasets and the output of a state of the art coupled ocean-atmosphere general circulation model that was integrated for 125 years. Both the observations and model results support the picture that the decadal variability in the regional of interest is based on a cycle involving unstable ocean-atmosphere interactions over the North Pacific. The period of this cycle is of the order of a few decades. The cycle involves the two major circulation regimes in the North Pacific climate system, the subtropical ocean gyre, and the Aleutian low. 41 refs., 18 figs.

  9. Surface enhanced Raman gene probe and methods thereof

    DOEpatents

    Vo-Dinh, T.

    1998-09-29

    The subject invention disclosed herein is a new gene probe biosensor and methods based on surface enhanced Raman scattering (SERS) label detection. The SER gene probe biosensor comprises a support means, a SER gene probe having at least one oligonucleotide strand labeled with at least one SERS label, and a SERS active substrate disposed on the support means and having at least one of the SER gene probes adsorbed thereon. Biotargets such as bacterial and viral DNA, RNA and PNA are detected using a SER gene probe via hybridization to oligonucleotide strands complementary to the SER gene probe. The support means supporting the SERS active substrate includes a fiberoptic probe, an array of fiberoptic probes for performance of multiple assays and a waveguide microsensor array with charge-coupled devices or photodiode arrays. 18 figs.

  10. Surface enhanced Raman gene probe and methods thereof

    DOEpatents

    Vo-Dinh, T.

    1998-07-21

    The subject invention disclosed is a new gene probe biosensor and methods based on surface enhanced Raman scattering (SERS) label detection. The SER gene probe biosensor comprises a support means, a SER gene probe having at least one oligonucleotide strand labeled with at least one SERS label, and a SERS active substrate disposed on the support means and having at least one of the SER gene probes adsorbed. Biotargets such as bacterial and viral DNA, RNA and PNA are detected using a SER gene probe via hybridization to oligonucleotide strands complementary to the SER gene probe. The support means supporting the SERS active substrate includes a fiberoptic probe, an array of fiberoptic probes for performance of multiple assays and a waveguide microsensor array with charge-coupled devices or photodiode arrays. 18 figs.

  11. Observations of the 40-50-day tropical oscillation - a review

    SciTech Connect

    Madden, R.A. ); Julian, P.R. )

    1994-05-01

    Observational aspects of the 40-50-day oscillation are reviewed. The oscillation is the result of large-scale circulation cells oriented in the equatorial plane that move eastward from at least the Indian Ocean to the central Pacific. Anomalies in zonal winds, and the velocity potential in the upper troposphere often propagate the full circumference of the globe. Related, complex convective regions also show an eastward movement. There is a zonally symmetric component to the oscillation. It is manifest in changes in surface pressure and in the relative atmospheric angular momentum. The oscillation is an important factor in the timing of active and break phases of the Indian and Australian monsoons. It affects ocean waves, currents, and air-sea interaction. The oscillation was particularly active during the First GARP (Global Atmospheric Research Program) Global Experiment year, and some features that were evident during the Monsoon Experiment are described. 126 refs., 18 figs., 2 tabs.

  12. Automation impact study of Army Training Management

    SciTech Connect

    Sanquist, T.F.; Schuller, C.R.; McCallum, M.C.; Underwood, J.A.; Bettin, P.J.; King, J.L.; Melber, B.D.; Hostick, C.J.; Seaver, D.A.

    1988-01-01

    The main objectives of this impact study were to identify the potential cost savings associated with automated Army Training Management (TM), and to perform a cost-benefit analysis for an Army-wide automated TM system. A subsidiary goal was to establish baseline data for an independent evaluation of a prototype Integrated Training Management System (ITMS), to be tested in the fall of 1988. A structured analysis of TM doctrine was performed for comparison with empirical data gathered in a job analysis survey of selected units of the 9ID (MTZ) at Ft. Lewis, Washington. These observations will be extended to other units in subsequent surveys. The survey data concerning staffing levels and amount of labor expended on eight distinct TM tasks were analyzed in a cost effectiveness model. The main results of the surveys and cost effectiveness modelling are summarized. 18 figs., 47 tabs.

  13. Investigation of effects of 60-Hz electric and magnetic fields on operant and social behavior and on the neuroendocrine system of nonhuman primates

    SciTech Connect

    Orr, J.L.

    1990-04-01

    The objective of this program is to investigate, using the baboon as a nonhuman primate surrogate for the human, behavioral and neuroendocrine effects associated with exposure to 60-Hz electric and magnetic fields. Results from this program, along with information from experiments conducted elsewhere, could be used to estimate and evaluate the likelihood of deleterious consequences resulting from exposure of humans to the electric and magnetic fields associated with electric power transmission. Activities this quarter extended those of the first project year: the modification of the facility to include 60-Hz magnetic fields, and development of the capability for studies of neuroendocrine parameters by obtaining blood samples from baboons during electric and magnetic field exposure. 18 figs., 7 tabs.

  14. Assessment of subsidence in karst terranes at selected areas in East Tennessee and comparison with a candidate site at Oak Ridge, Tennessee: Phase 2

    SciTech Connect

    Newton, J.G.; Tanner, J.M.

    1987-09-01

    Work in the respective areas included assessment of conditions related to sinkhole development. Information collected and assessed involved geology, hydrogeology, land use, lineaments and linear trends, identification of karst features and zones, and inventory of historical sinkhole development and type. Karstification of the candidate, Rhea County, and Morristown study areas, in comparison to other karst areas in Tennessee, can be classified informally as youthful, submature, and mature, respectively. Historical sinkhole development in the more karstified areas is attributed to the greater degree of structural deformation by faulting and fracturing, subsequent solutioning of bedrock, thinness of residuum, and degree of development by man. Sinkhole triggering mechanisms identified are progressive solution of bedrock, water-level fluctuations, piping, and loading. 68 refs., 18 figs., 11 tabs.

  15. Separation, fractionation, concentration and drying of food products: Final report, March 4, 1987--March 31, 1988

    SciTech Connect

    Merlo, C.A.; Rose, W.W.; Pedersen, L.D.; Brewbaker, P.L.

    1988-03-01

    This project studied energy efficient processes for separation, fractionation, concentration, drying, and recombination of food products, in order to reduce energy requirements for processing, preservation, and transportation. The project had three phases. In the laboratory-scale phase, results of which are summarized in this report, tomato puree was separated by three methods: conventional vacuum filtration, centrifugation, and crossflow microfiltration to produce pulp and serum. Three methods of recombination were examined: homogenizing, stomacher blending, and static (in-line) mixing. Satisfactory recombined purees were obtained. In addition, after centrifugation, the pulp was rinsed producing rinsed-pulp, and the rinse water was added to the serum producing rinse/serum. The rinse/serum was concentrated by evaporation. This was recombined with the rinsed-pulp and water producing satisfactory puree. 11 refs., 18 figs., 18 tabs.

  16. MP-Division health and safety reference handbook. [Contains glossary

    SciTech Connect

    Putnam, T.M.

    1987-09-01

    This report presents the objectives, organization, policies, and essential rules and procedures that have been adopted by MP Division and that form the basis of the Health and Safety Program of the Clinton P. Anderson Meson Physics Facility (LAMPF). The facility includes the beam-delivery systems for the Los Alamos Neutron Scattering Center and the Weapons Neutron Research Facility (LANSCE/WNR). The program is designed not only to assure the health and safety of all personnel, including users, in their work at LAMPF, and of MP-Division staff in their work on the LANSCE/WNR beam lines, but also to protect the facility (buildings and equipment) and the environment. 33 refs., 18 figs., 2 tabs.

  17. Methodologies for Assessing the Cumulative Environmental Effects of Hydroelectric Development of Fish and Wildlife in the Columbia River Basin, Volume 1, Recommendations, 1987 Final Report.

    SciTech Connect

    Stull, Elizabeth Ann

    1987-07-01

    This volume is the first of a two-part set addressing methods for assessing the cumulative effects of hydropower development on fish and wildlife in the Columbia River Basin. Species and habitats potentially affected by cumulative impacts are identified for the basin, and the most significant effects of hydropower development are presented. Then, current methods for measuring and assessing single-project effects are reviewed, followed by a review of methodologies with potential for use in assessing the cumulative effects associated with multiple projects. Finally, two new approaches for cumulative effects assessment are discussed in detail. Overall, this report identifies and reviews the concepts, factors, and methods necessary for understanding and conducting a cumulative effects assessment in the Columbia River Basin. Volume 2 will present a detailed procedural handbook for performing a cumulative assessment using the integrated tabular methodology introduced in this volume. 308 refs., 18 figs., 10 tabs.

  18. Determination of alternative fuels combustion products: Phase 2 final report

    SciTech Connect

    Whitney, K.A.

    1997-06-01

    This report describes the laboratory efforts to accomplish four independent tasks: (1) speciation of hydrocarbon exhaust emissions from a light-duty vehicle operated over the chassis dynamometer portion of the light-duty FTP after modifications for operation on butane and butane blends; (2) evaluation of NREL`s Variable Conductance Vacuum Insulated Catalytic Converter Test Article 4 for the reduction of cold-start FTP exhaust emissions after extended soak periods for a Ford FFV Taurus operating on E85; (3) support of UDRI in an attempt to define correlations between engine-out combustion products identified by SwRI during chassis dynamometer testing, and those found during flow tube reactor experiments conducted by UDRI; and (4) characterization of small-diameter particulate matter from a Ford Taurus FFV operating in a simulated fuel-rich failure mode on CNG, LPG, M85, E85, and reformulated gasoline. 22 refs., 18 figs., 17 tabs.

  19. Applications of pulsed neutron powder diffraction to actinide elements. [Pu-Al

    SciTech Connect

    Lawson, A.C.; Richardson, J.W.; Mueller, M.H.; Lander, G.H.; Goldstone, J.A.; Williams, A.; Kwei, G.H.; Von Dreele, R.B.; Faber, J. Jr.; Hitterman, R.L.

    1987-11-01

    We have been using the technique of pulsed neutron powder diffraction to study several problems in the physics and chemistry of the actinide elements. In these elements one often encounters very complex structures resulting from polymorphic transformations presumably induced by the presence of 5f-electrons. For example, at least five distinct structures of plutonium metal are found between room temperature and its melting point of 640/sup 0/C, and two of the structures are monoclinc. The determination of the crystal structure of beta-uranium (tetragonal, 30 atoms per unit cell) which has finnaly been shown to be centrosymmetric, after decades of uncertainty is discussed. Some preliminary results on the structure of alpha-plutonium (which confirm Zachariasen's original determination of the monoclinic structure) are presented. Pu-Al alloys were also studied. 12 refs., 18 figs.

  20. Institute of Geophysics and Planetary Physics at Lawrence Livermore National Laboratory: 1986 annual report

    SciTech Connect

    Max, C.E.

    1987-07-01

    The purpose of the Institute of Geophysics and Planetary Physics (IGPP) at LLNL is to enrich the opportunities of University of California campus researchers by making available to them some of the Laboratory's unique facilities and expertise, and to broaden the scientific horizon of LLNL researchers by encouraging collaborative or interdisciplinary work with other UC scientists. The IGPP continues to emphasize three fields of research - geoscience, astrophysics, and high-pressure physics - each administered by a corresponding IGPP Research Center. Each Research Center coordinates the mini-grant work in its field, and also works with the appropriate LLNL programs and departments, which frequently can provide supplementary funding and facilities for IGPP projects. 62 refs., 18 figs., 2 tabs.

  1. Leak checker data logging system

    DOEpatents

    Gannon, J.C.; Payne, J.J.

    1996-09-03

    A portable, high speed, computer-based data logging system for field testing systems or components located some distance apart employs a plurality of spaced mass spectrometers and is particularly adapted for monitoring the vacuum integrity of a long string of a superconducting magnets such as used in high energy particle accelerators. The system provides precise tracking of a gas such as helium through the magnet string when the helium is released into the vacuum by monitoring the spaced mass spectrometers allowing for control, display and storage of various parameters involved with leak detection and localization. A system user can observe the flow of helium through the magnet string on a real-time basis hour the exact moment of opening of the helium input valve. Graph reading can be normalized to compensate for magnet sections that deplete vacuum faster than other sections between testing to permit repetitive testing of vacuum integrity in reduced time. 18 figs.

  2. Assessment of RELAP5/MOD2 code using loss of offsite power transient data of KNU (Korea Nuclear Unit) No. 1 Plant

    SciTech Connect

    Chung, Bud-Dong; Kim, Hho-Jung . Korea Nuclear Safety Center); Lee, Young-Jin )

    1990-04-01

    This report presents a code assessment study based on a real plant transient that occurred on June 9, 1981 at the KNU {number sign}1 (Korea Nuclear Unit Number 1). KNU {number sign}1 is a two-loop Westinghouse PWR plant of 587 Mwe. The loss of offsite power transient occurred at the 77.5% reactor power with 0.5%/hr power ramp. The real plant data were collected from available on-line plant records and computer diagnostics. The transient was simulated by RELAP5/MOD2/36.05 and the results were compared with the plant data to assess the code weaknesses and strengths. Some nodalization studies were performed to contribute to developing a guideline for PWR nodalization for the transient analysis. 5 refs., 18 figs., 3 tabs.

  3. Response of hot nuclei

    SciTech Connect

    Broglia, R.A.

    1986-01-01

    The dipole giant resonance is reviewed, as it is the only vibration which has been experimentally identified in the decay of hot nuclei. The mechanism of exciting the resonance and the mode of the resonance are described. The methods used to calculate the vibrations from the shell model are discussed, including the Hartree-Fock approximation and random phase approximation. Nuclei formed by compound nuclear reactions, which possess high excitation energy and angular momentum, are considered. It is argued that the stability of the dipole may be used to advantage in the study of other properties of nuclei at high excitation. It is also considered possible that the discussion of the dipole giant resonance may be extended to the gamma decay of the isovector quadrupole vibration. 26 refs., 18 figs. (LEW)

  4. High-Yield Lithium-Injection Fusion-Energy (HYLIFE) reactor

    SciTech Connect

    Blink, J.A.; Hogam, W.J.; Hovingh, J.; Meier, E.R.; Pitts, J.H.

    1985-12-23

    The High-Yield Lithium-Injection Fusion Energy (HYLIFE) concept to convent inertial confinement fusion energy into electric power has undergone intensive research and refinement at LLNL since 1978. This paper reports on the final HYLIFE design, focusing on five major areas: the HYLIFE reaction chamber (which includes neutronics, liquid-metal jet-array hydrocynamics, and structural design), supporting systems, primary steam system and balance of plant, safety and environmental protection, and costs. An annotated bibliography of reports applicable to HYLIFE is also provided. We conclude that HYLIFE is a particularly viable concept for the safe, clean production of electrical energy. The liquid-metal jet array, HYLIFE's key design feature, protects the surrounding structural components from x-rays, fusion fuel-pellet debris, neutron damage and activation, and high temperatures and stresses, allowing the structure to last for the plant's entire 30-year lifetime without being replaced. 127 refs., 18 figs.

  5. Performance testing of radiobioassay laboratories: In vitro measurements (urinalysis): Final report

    SciTech Connect

    MacLellan, J.A.; Traub, R.J.; Fisher, D.R.

    1988-03-01

    This report provides results of the two-round nationwide in vitro bioassay intercomparison study. Conclusions were based on analyses by 35 bioassay laboratories of nearly 1400 artificial urine samples containing known quantities of radionuclides. The test radionuclides were H, /sup 89/Sr, /sup 238/Pu, /sup 241/Am, /sup 137/Cs, /sup 60/Co, and natural uranium. The data reported included background count rates, total samples counts, counting times, counting efficiencies, sample yields, and estimated errrors of the determinations. The measurement data were evaluated according to statistical methods presented in the November 1985 version of the draft ANSI Standard N13.30. If a laboratory failed a performance test for any one of the three criteria, the laboratory was considered to have failed the test for that category. 22 refs., 18 figs., 14 tabs

  6. Cavity dimensions for high velocity penetration events: A comparison of calculational results with data

    SciTech Connect

    Kmetyk, L.N.; Yarrington, P.

    1989-05-01

    Calculations were performed with the CTH and HULL finite difference wavecodes to evaluate computational capabilities for predicting depth and diameter of target cavities produced in high velocity penetration events. The calculations simulated selected tests in a set of armor penetration experiments conducted by the US Army Ballistic Research Laboratory and reported earlier in the literature. The tests and simulations involved penetration of semi-infinite targets by long rod projectiles over a range of impact velocities from 1.3 to 4.5 km/sec. Comparisons are made between the calculated and measured dimensions of the target cavities, and the sensitivity of the predicted results to target property variations is investigated. 9 refs., 18 figs., 3 tabs.

  7. Mean surface water balance over Africa and its interannual variability

    SciTech Connect

    Nicholson, S.E.; Kim, J.; Ba, M.B.; Lare, A.R.

    1997-12-01

    This article presents calculations of surface water balance for the African continent using a revised version of the Lettau climatonomy. Calculations are based on approximately 1400 rainfall stations, with records generally covering 60 yr or longer. Continental maps of evapotranspiration. runoff, and soil moisture are derived for January, July, and the annual mean. The model is also used to provide a gross estimate of the interannual variability of these parameters over most of the continent and local water balance calculations for a variety of locations in Africa. The results are compared with four other comprehensive global water balance studies. The results of this study are being used to produce a gridded dataset for the continent, with potential applications for numerical modeling studies. 50 refs., 18 figs., 3 tabs.

  8. Technology Development Plan: Geotechnical survey systems for OTEC (Ocean Thermal Energy Conversion) cold water pipes: Final subcontract report

    SciTech Connect

    Valent, P.J.; Riggins, M.

    1989-04-01

    This report provides an overview of current and developing technologies and techniques for performing geotechnical investigations for siting and designing Cold Water Pipes (CWP) for shelf-resting Ocean Thermal Energy Conversion (OTEC) power plants. The geotechnical in situ tools used to measure the required parameters and the equipment/systems used to deploy these tools are identified. The capabilities of these geotechnical tools and deployment systems are compared to the data requirements for the CWP foundation/anchor design, and shortfalls are identified. For the last phase of geotechnical data gathering for design, a drillship will be required to perform soil boring work, to obtain required high-quality sediment samples for laboratory dynamic testing, and to perform deep-penetration in situ tests. To remedy shortfalls and to reduce the future OTEC CWP geotechnical survey costs, it is recommended that a seafloor-resting machine be developed to advance the friction cone penetrometer, and also probably a pressuremeter, to provide geotechnical parameters to shallow subseafloor penetrations on slopes of 35/degree/ and in water depths to 1300 m. 74 refs., 19 figs., 6 tabs.

  9. Lightweight bladder lined pressure vessels

    DOEpatents

    Mitlitsky, F.; Myers, B.; Magnotta, F.

    1998-08-25

    A lightweight, low permeability liner is described for graphite epoxy composite compressed gas storage vessels. The liner is composed of polymers that may or may not be coated with a thin layer of a low permeability material, such as silver, gold, or aluminum, deposited on a thin polymeric layer or substrate which is formed into a closed bladder using tori spherical or near tori spherical end caps, with or without bosses therein, about which a high strength to weight material, such as graphite epoxy composite shell, is formed to withstand the storage pressure forces. The polymeric substrate may be laminated on one or both sides with additional layers of polymeric film. The liner may be formed to a desired configuration using a dissolvable mandrel or by inflation techniques and the edges of the film sealed by heat sealing. The liner may be utilized in most any type of gas storage system, and is particularly applicable for hydrogen, gas mixtures, and oxygen used for vehicles, fuel cells or regenerative fuel cell applications, high altitude solar powered aircraft, hybrid energy storage/propulsion systems, and lunar/Mars space applications, and other applications requiring high cycle life. 19 figs.

  10. Improving urban air quality in China: Beijing case study

    SciTech Connect

    Jiming Hao; Litao Wang

    2005-09-01

    China is undergoing rapid urbanization because of unprecedented economic growth. As a result, many cities suffer from air pollution. Two-thirds of China's cities have not attained the ambient air quality standards applicable to urban residential areas (Grade II). Particulate matter (PM), rather than sulfur dioxide (SO{sub 2}), is the major pollutant reflecting the shift from coal burning to mixed source pollution. In 2002, 63.2 and 22.4% of the monitored cities have PM and SO{sub 2} concentrations exceeding the Grade II standard, respectively. Nitrogen oxides (NOx) concentration kept a relatively stable level near the Grade II standard in the last decade and had an increasing potential in recent years because of the rapid motorization. In general, the air pollutants emission did not increase as quickly as the economic growth and energy consumption, and air quality in Chinese cities has improved to some extent. Beijing, a typical representative of rapidly developing cities, is an example to illustrate the possible options for urban air pollution control. Beijing's case provides hope that the challenges associated with improving air quality can be met during a period of explosive development and motorization. 21 refs., 19 figs., 6 tabs.

  11. Thermal numerical simulator for laboratory evaluation of steamflood oil recovery

    SciTech Connect

    Sarathi, P.

    1991-04-01

    A thermal numerical simulator running on an IBM AT compatible personal computer is described. The simulator was designed to assist laboratory design and evaluation of steamflood oil recovery. An overview of the historical evolution of numerical thermal simulation, NIPER's approach to solving these problems with a desk top computer, the derivation of equations and a description of approaches used to solve these equations, and verification of the simulator using published data sets and sensitivity analysis are presented. The developed model is a three-phase, two-dimensional multicomponent simulator capable of being run in one or two dimensions. Mass transfer among the phases and components is dictated by pressure- and temperature-dependent vapor-liquid equilibria. Gravity and capillary pressure phenomena were included. Energy is transferred by conduction, convection, vaporization and condensation. The model employs a block centered grid system with a five-point discretization scheme. Both areal and vertical cross-sectional simulations are possible. A sequential solution technique is employed to solve the finite difference equations. The study clearly indicated the importance of heat loss, injected steam quality, and injection rate to the process. Dependence of overall recovery on oil volatility and viscosity is emphasized. The process is very sensitive to relative permeability values. Time-step sensitivity runs indicted that the current version is time-step sensitive and exhibits conditional stability. 75 refs., 19 figs., 19 tabs.

  12. Nonpreemptive run-time scheduling issues on a multitasked, multiprogrammed multiprocessor with dependencies, bidimensional tasks, folding and dynamic graphs

    SciTech Connect

    Miller, Allan Ray

    1987-05-01

    Increases in high speed hardware have mandated studies in software techniques to exploit the parallel capabilities. This thesis examines the effects a run-time scheduler has on a multiprocessor. The model consists of directed, acyclic graphs, generated from serial FORTRAN benchmark programs by the parallel compiler Parafrase. A multitasked, multiprogrammed environment is created. Dependencies are generated by the compiler. Tasks are bidimensional, i.e., they may specify both time and processor requests. Processor requests may be folded into execution time by the scheduler. The graphs may arrive at arbitrary time intervals. The general case is NP-hard, thus, a variety of heuristics are examined by a simulator. Multiprogramming demonstrates a greater need for a run-time scheduler than does monoprogramming for a variety of reasons, e.g., greater stress on the processors, a larger number of independent control paths, more variety in the task parameters, etc. The dynamic critical path series of algorithms perform well. Dynamic critical volume did not add much. Unfortunately, dynamic critical path maximizes turnaround time as well as throughput. Two schedulers are presented which balance throughput and turnaround time. The first requires classification of jobs by type; the second requires selection of a ratio value which is dependent upon system parameters. 45 refs., 19 figs., 20 tabs.

  13. Idaho Habitat Evaluation for Off-Site Mitigation Record : Annual Report 1988.

    SciTech Connect

    Idaho. Dept. of Fish and Game.

    1990-03-01

    The Idaho Department of Fish and Game (IDFG) has been monitoring and evaluating existing and proposed habitat improvement projects for steelhead and chinook in the Clearwater and Salmon subbasins since 1984. Projects included in the monitoring are funded by, or proposed for funding by, the Bonneville Power Administration (BPA) under the Northwest Power Planning Act as off-site mitigation for downstream hydropower development on the Snake and Columbia Rivers. This monitoring project is also funded under the same authority. A mitigation record is being developed to use actual and potential increases in smolt production as the best measures of benefit from a habitat improvement project. This project is divided into two subprojects: general and intensive monitoring. Primary objectives of the general monitoring subproject are to determine natural production increases due to habitat improvement projects in terms of parr production and to determine natural production status and trends in Idaho. The second objective is accomplished by combining parr density from monitoring and evaluation of BPA habitat projects and from other IDFG management and research activities. The primary objective of the intensive monitoring subproject is to determine the relationships between spawning escapement, parr production, and smolt production in two Idaho streams; the upper Salmon River and Crooked River. Results of the intensive monitoring will be used to estimate mitigation benefits in terms of smolt production and to interpret natural production monitoring in Idaho. 30 refs., 19 figs., 34 tabs.

  14. Compilation of selected marine radioecological data for the US Subseabed Program: Summaries of available radioecological concentration factors and biological half-lives

    SciTech Connect

    Gomez, L.S.; Marietta, M.G.; Jackson, D.W.

    1987-04-01

    The US Subseabed Disposal Program has compiled an extensive concentration factor and biological half-life data base from the international marine radioecological literature. A microcomputer-based data management system has been implemented to provide statistical and graphic summaries of these data. The data base is constructed in a manner which allows subsets to be sorted using a number of interstudy variables such as organism category, tissue/organ category, geographic location (for in situ studies), and several laboratory-related conditions (e.g., exposure time and exposure concentration). This report updates earlier reviews and provides summaries of the tabulated data. In addition to the concentration factor/biological half-life data base, we provide an outline of other published marine radioecological works. Our goal is to present these data in a form that enables those concerned with predictive assessment of radiation dose in the marine environment to make a more judicious selection of data for a given application. 555 refs., 19 figs., 7 tabs.

  15. Cryogenic explosion environment modeling and testing of space shuttle and light-weight radioisotope heater unit interactions

    SciTech Connect

    Johnson, E.W.

    1985-10-01

    In order to assess the risk to the world's populace in the event of a Space Shuttle accident when radioisotope-containing heat sources are on board, testing of that system must be performed to determine release point, environments required, and the size distribution of the released fuel. To evaluate the performance of the Light-Weight Radioisotope Heater Unit (LWRHU) (101 of these 1-W items are placed on the Galileo spacecraft which will be launched from the Space Shuttle), some high-velocity impact and flyer plate testing was carried out. The results showed that a bare urania-fueled LWRHU clad (approximately 1-mm thick platinum-30 wt % rhodium alloy) will withstand 1100 m/s flyer plate (3.5-mm thick aluminum) impacts and 330 m/s impacts upon the Space Shuttle floor (approximately 12-mm thick aluminum) without rupture or fuel release. Velocities in the order of 600 m/s on a steel surface will cause clad failure with fuel release. The fuel breakup patterns were characterized as to quantity in a specific size range. These data were employed in the formal Safety Analysis Report for the LWRHU to support the planned 1986 Galileo launch. 19 figs.

  16. Data summary report for fission product release test VI-5

    SciTech Connect

    Osborne, M.F.; Lorenz, R.A.; Travis, J.R.; Webster, C.S.; Collins, J.L. )

    1991-10-01

    Test VI-5, the fifth in a series of high-temperature fission product release tests in a vertical test apparatus, was conducted in a flowing mixture of hydrogen and helium. The test specimen was a 15.2-cm-long section of a fuel rod from the BR3 reactor in Belgium which had been irradiated to a burnup of {approximately}42 MWd/kg. Using a hot cell-mounted test apparatus, the fuel rod was heated in an induction furnace under simulated LWR accident conditions to two test temperatures, 2000 K for 20 min and then 2700 K for an additional 20 min. The released fission products were collected in three sequentially operated collection trains on components designed to measure fission product transport characteristics and facilitate sampling and analysis. The results from this test were compared with those obtained in previous tests in this series and with the CORSOR-M and ORNL diffusion release models for fission product release. 21 refs., 19 figs., 12 tabs.

  17. Statistical modeling of corrosion-induced wirebond failure

    SciTech Connect

    Sorensen, N.R.; Braithwaite, J.W.

    1997-04-01

    This paper describes the initial results of one portion of a project to develop effective analytical tools for predicting the effect of atmospheric corrosion on the reliability of electronic devices. The specific objectives of this work were to experimentally characterize the atmospheric corrosion of aluminum-gold wirebonds and to develop a statistical-based model that describes the effect of the resulting stochastic process on the reliability of a selected electronic assembly. The experimental characterization included an attempt at accelerated aging. Modeling involved: (1) the development and validation of empirical models that describe the effects of environmental parameters on corrosion rate, and (2) the formulation and validation of a reliability-prediction model using the accelerated aging data and long-term field information as it becomes available. A preliminary assessment of the effect of three environmental factors on wirebond failure rate was performed and an empirical rate model defined. Subsequently, a statistical treatment of the rate information was used in a Monte Carlo simulation technique to determine the service life of a hypothetical electronic assembly. This work demonstrated that stochastic, corrosion-induced degradation can be successfully incorporated in classical techniques to analyze component reliability. 19 figs., 3 tabs.

  18. Evaluation of military field-water quality

    SciTech Connect

    Selleck, R.E.; Ungun, Z.; Chesler, G.; Diyamandoglu, V.; Marinas, B. . Sanitary Engineering and Environmental Health Research Lab.); Daniels, J.I. )

    1990-05-01

    A comparison is made between the performances of the 600-gph Reverse Osmosis Water Purification Unit (ROWPU) operated in the bypass mode and the Mobile Water Purification Unit (MWPU, frequently referred to as an ERDLATOR because the equipment was developed at the Engineer Research and Development Laboratory at Fort Belvoir, VA.) Generally, the performance of the MWPU is significantly better than the pretreatment units of the ROWPU in terms of removing both turbidity and pathogenic organisms. It is recommended that the practice of bypassing the reverse osmosis (RO) components of the ROWPU be avoided unless it can be demonstrated clearly that the cartridge filters will remove the cysts of infectious organisms effectively and reliably. If the ROWPU must be operated in the bypass mode, it is recommended that the dose of disinfectant used be made equal to that currently employed in the field for untreated raw water. The analytical methods used to determine total dissolved solids (TDS) and residual free chlorine with the new Water-Quality Monitor (WQM) are also reviewed briefly. The limitations of the methods used to calibrate the TDS and free-chlorine probes of the new WQM are discussed. 98 refs., 19 figs., 16 tabs.

  19. Desiccant contamination research: Report on the desiccant contamination test facility

    SciTech Connect

    Pesaran, A.A.; Bingham, C.E.

    1991-07-01

    The activity in the cooling systems research involves research on high performance dehumidifiers and chillers that can operate efficiently with the variable thermal outputs and delivery temperatures associated with solar collectors. It also includes work on advanced passive cooling techniques. This report describes the work conducted to improve the durability of solid desiccant dehumidifiers by investigating the causes of degradation of desiccant materials from airborne contaminants and thermal cycling. The performance of a dehumidifier strongly depends on the physical properties and durability of the desiccant material. To make durable and reliable dehumidifiers, an understanding is needed of how and to what degree the performance of a dehumidifier is affected by desiccant degradation. This report, an account of work under Cooling Systems Research, documents the efforts to design and fabricate a test facility to investigate desiccant contamination based on industry and academia recommendations. It also discusses the experimental techniques needed for obtaining high-quality data and presents plans for next year. Researchers of the Mechanical and Industrial Technology Division performed this work at the Solar Energy Research Institute in FY 1988 for DOE's Office of Solar Heat Technologies. 7 refs., 19 figs., 1 tab.

  20. SOLERAS - Saudi Arabian-United States Program for cooperation in the field of solar energy: Executive summary SOLERAS Program overview

    SciTech Connect

    Williamson, J.S.; Key, W.P.

    1987-03-01

    The SOLERAS Program was a unique bilateral, international, cooperative research effort. The intent of SOLERAS was to utilize the technical and financial resources of each country to advance the development of solar energy through cooperative research projects. The Program involved research and applications in most of the major renewable technologies during its nine-year life, and its participants include some of the most accomplished individuals, corporations, universities, and laboratories in solar energy research. The Program benefited enormously from the professional and personal commitment of these participants. SOLERAS accomplished several major research projects, completed resource assessment activities, and sponsored numerous technology workshops, short courses, and technical reports. This Executive Summary report provides only a limited overview of the activities and major accomplishments. Detailed project activities and experiences are documented in numerous SOLERAS reports describing system design, operations, and evaluations. These reports are available in the United States through the National Technical Information Center. In Saudi Arabia, these reports are available through the King Abdul Aziz City for Science and Technology. 19 figs., 4 tabs.

  1. Application and sensitivity studies of the orographic cloud model MCCP (Mountain Cloud Chemistry Program) PLUVIUS

    SciTech Connect

    Chapman, E.G.; Luecken, D.J.; Whiteman, C.D.

    1987-07-01

    A special MCCP version of the PLUVIUS MOD 5.0 reactive storm model (MCCP PLUVIUS) was applied to conditions representative of Mt. Mitchell, North Carolina. Tests were also conducted to determine the sensitivity of the model to various meteorological and chemical parameters. Results of the modeling investigation indicate that aqueous concentrations and deposition fluxes of pollutants are location dependent. The greatest concentrations occur at the edges of the cloud, where the liquid water content is low, and the greatest deposition flux occurs on the windward side of the mountain. For conditions considered representative of summertime conditions at Mt. Mitchell, predicted ion concentrations in deposited cloud water at a point corresponding to the MCCP field station are within the ranges actually observed. Sensitivity studies indicate that in-cloud oxidation of SO/sub 2/ makes a limited contribution to total sulfate deposition for typical concentrations of SO/sub 2/, O/sub 3/, and H/sub 2/O/sub 2/. However, sulfate deposition predicted by MCCP PLUVIUS is extremely sensitive to the value selected for aerosol sulfate existing in the modeled air mass prior to cloud formation. Hydrogen ion deposition predicted by the model is strongly influenced by input values for gas-phase nitric acid and ammonia. 11 refs., 19 figs., 9 tabs.

  2. The lithosphere

    SciTech Connect

    Not Available

    1983-01-01

    This document is the report of a week-long workshop on problems relating to the interpretations of the composition and dynamics of the lithosphere. A wide range of topics was discussed, dealing not only with the lithosphere itself, but also with possible interactions between the lithosphere and underlying mantle, down to and including the core-mantle boundary zone. Emphasis, very broadly, was on the physical and chemical properties of the lower crust and the subcrustal lithosphere: the physical and chemical characteristics of the prominent seismic discontinuities down to the core-mantle boundary; the nature and patterns of possible convection within the mantle and its relation to the generation, subduction, and intermixing of lithospheric and mantle material; the location and nature and evolution of reservoirs supplying magmas to the crust; and the various models that have been proposed to account for the location, nature, and geological history of these magma reservoirs. The general applicability of the plate tectonics model was assumed, but virtually every widely accepted explanation for the dynamics of that model and of possible unrelated phenomena such as deep-mantle plumes and hot spots was brought into question. 83 refs., 19 figs.

  3. Electrical power inverter having a phase modulated, twin-inverter, high frequency link and an energy storage module

    DOEpatents

    Pitel, I.J.

    1987-02-03

    The present invention provides an electrical power inverter method and apparatus, which includes a high frequency link, for converting DC power into AC power. Generally stated, the apparatus includes a first high frequency module which produces an AC voltage at a first output frequency, and a second high frequency inverter module which produces an AC voltage at a second output frequency that is substantially the same as the first output frequency. The second AC voltage is out of phase with the first AC voltage by a selected angular phase displacement. A mixer mixes the first and second output voltages to produce a high frequency carrier which has a selected base frequency impressed on the sidebands thereof. A rectifier rectifies the carrier, and a filter filters the rectified carrier. An output inverter inverts the filtered carrier to produce an AC line voltage at the selected base frequency. A phase modulator adjusts the relative angular phase displacement between the outputs of the first and second high frequency modules to control the base frequency and magnitude of the AC line voltage. 19 figs.

  4. The development of a 20-inch indirect fired fluidized bed gasifier

    SciTech Connect

    Flanigan, V.J.; Sitton, O.C.; Huang, W.E

    1988-03-01

    This report discusses the design, fabrication and operation of a 20'' I.D. fluidized bed gasifier producing medium Btu gas. The reactor is indirectly heated using 30 x 1-inch U-tubes inserted in the inert bed. The U-tubes are heated using flue gases produced from a propane burner system located at the bottom of the reactor. The feed material was dry wood chips fed into the bed with a 6in. auger. The reactor was fed both into the bed and at the top of the bed. The fluidizing medium was superheated steam which was superheated to 1000/degree/F. The gas produced from the reactor was passed through a cyclone for char removal and routed to the flare for combustion and disposal. The parameters measured during the experimental runs were wood feed rate, steam flow rate, steam temperatures, bed temperatures, free board temperatures, product gas temperatures, bed differential pressures, char production, gas production, gas analyses, and tar production. The parameters measured in the laboratory were moisture contents (wood and char), ash contents (wood and char), and tar content. 9 refs., 19 figs., 11 tabs.

  5. On the refraction of longitudinal waves in compressible media

    SciTech Connect

    Henderson, L.F.

    1988-07-01

    The refraction of plane shock waves in media with arbitrary equations of state is discussed. Previous work is reviewed briefly, and a rigorous definition of wave impedance is formulated. Earlier definitions are shown to be unsatisfactory. The impedance is combined with the boundary conditions at the media interface in order to study both head-on and oblique shock incidence. The impedance determines the nature of the reflected and transmitted waves, their intensities, and the fractions of energy and power that are reflected and transmitted. The refractive index is also defined; it determines whether or not a wave will be refracted and also helps to determine whether the wave system will be regular or irregular. The fundamental law of refraction is derived and shown to be a consequence of the fact that an arbitrary point on a shock or an expansion wave follows a ray path of minimum time between any points on the path. This is a generalization of Fermat's principle to media that are deformed and convected by the waves propagating through them. There is also a detailed discussion of a wide variety of refractions at head-on and at glancing incidence. 40 refs., 19 figs.

  6. Hot dry rock geothermal energy development program: Annual report, Fiscal year 1986

    SciTech Connect

    Dash, Z.V.; Grant, T.; Jones, G.; Murphy, H.D.; Wilson, M.G.

    1989-02-01

    Preparation, execution, and analysis of a 30-day Initial Closed-Loop Flow Test (ICFT) of the Phase II reservoir were the primary objectives of the Hot Dry Rock Program in fiscal year 1986. The ICFT successfully tested the Phase II heat-extraction loop with the injection of 37,000 m/sup 3/ of cold water and production of 23,000 m/sup 3/ of hot water, extracting up to 10 MW/sub t/ when production reached 0.0139 m/sup 3//s at 192/degree/C. By the end of the test, water loss rate has decreased to 26% and a significant portion of the injected water had been recovered, 66% during the test and an additional 20% during subsequent venting. Geochemical, tracer, and seismic analyses suggest reservoir fracture volume was growing throughout the test. A new technique, the ''three-point'' method, was developed to determine locations and orientations of seismically active planes. Fault or joint planes are identified in what superficially appears to be an amorphous microearthquake location set. Five planes were determined when the three-point method was applied to a location data set for the massive hydraulic-fracturing experiment conducted in 1983. 23 refs., 19 figs., 3 tabs.

  7. On-machine sensors to measure paper mechanical properties, Report No. 1

    SciTech Connect

    Hall, M.S.; Habeger, C.C. Jr.

    1988-10-01

    This project is a four-year program which began October 1, 1986. The work may be separated into two distinct parts and four phases. Part I (Phases 1 and 2) is being emphasized to date, and Part II (Phases 3 and 4) will be initiated upon successful completion of Part I. Part I of this project is specifically concerned with the development of a sensor to make on-machine measurements of elastic stiffness in the thickness direction of the paper and the integration of this sensor with an appropriate in-plane sensor. Upon completion of Part I (Phases 1 and 2), we expect to be able to independently monitor the effects of refining, jet-to-wire speed ratios, and draws (and the related drying restraints) on paper properties. This means that we should be able to control these three machine variables continuously and independently during the manufacturing process. Part II of the project will then be concerned with the development of algorithms, hardware, and software necessary to control these variables on the paper machine in the machine direction (Phase 3) and the cross-machine direction (Phase 4). Project objectives call for a successful demonstration of the sensor and control scheme on a laboratory scale paper machine. Success would lead to further work on a pilot scale and eventual scale-up to a full size paper machine. 22 refs., 19 figs., 5 tabs.

  8. Technology base research project for electrochemical energy storage: Annual report for 1987

    SciTech Connect

    Kinoshita, Kim

    1988-07-01

    This report summarizes the progress made by the Technology Base Research (TBR) Project for Electrochemical Energy Storage during calendar year 1987. The primary objective of the TBR Project, which is sponsored by the Department of Energy (DOE) and managed by Lawrence Berkeley Laboratory (LBL), is to identify electrochemical technologies that can satisfy stringent performance and economic requirements for electric vehicles and stationary energy storage applications. The ultimate goal is to transfer the most promising electrochemical technologies to the private sector or to another DOE project (e.g., Sandia National Laboratories' Exploratory Technology Development and Testing Project) for further development and scale-up. Besides LBL, which has overall responsibility for the TBR Project, Los Alamos National Laboratory (LANL), Brookhaven National Laboratory (BNL) and Argonne National Laboratory (ANL) participate in the TBR Project by providing key research support in several of the project elements. The TBR Project consists of three major project elements: exploratory research; applied science research and; air systems research. The objectives and the specific battery and electrochemical systems addressed by each project element are discussed in the following sections, which also include technical summaries that relate to the individual projects. Financial information that relates to the various projects and a description of the management activities for the TBR Project are described in the Executive Summary. 19 figs., 1 tab.

  9. Feeding Activity, Rate of Consumption, Daily Ration and Prey Selection of Major Predators in John Day Reservoir, 1985: Annual Report.

    SciTech Connect

    Palmer, Douglas E.; United States. Bonneville Power Administration; U.S. Fish and Wildlife Service; National Fishery Research Center

    1986-10-01

    This report summarizes activities in 1985 to determine the extent of predation on juvenile salmonids in John Day Reservoir. To estimate consumption of juvenile salmonids we used the composition of the natural diet of predators and in the laboratory determined rate of gastric evacuation by predators. Salmonids were the single most important food item for northern squawfish (Ptychocheilus oregonensis) at McNary tailrace during all sampling periods and at John Day forebay during July. Salmonids accounted for 11.6% of the diet of walleye (Stizostedion vitreum vitreum) in 1985 which was about twice that found in previous years. Salmonids contributed little to smallmouth bass (Micropterus dolomieui) diet but comprised about 25% of the diet of channel catfish (Ictalurus punctatus). Composition of prey taxa in beach seine catches in 1985 was similar to 1983 and 1984 with chinook salmon (Oncorhynchus tschawytscha), northern squawfish, largescale sucker (Catostomus macrocheilus), and sand roller (Percopsis transmontana) dominating the catch at main channel stations and crappies (Pomoxis spp.) and largescale sucker dominating at backwater stations. Preliminary results of beach seine efficiency studies suggest that seine efficiency varied significantly among prey species and between substrate types in 1985. Results of digestion rate experiments indicate that gastric evacuation in northern squawfish can be predicted using water temperature, prey weight, predator weight and time. 19 refs., 19 figs., 13 tabs.

  10. Procurement and screening test data for advanced austenitic alloys for 650/degree/C steam service: Part 2, final report

    SciTech Connect

    Swindeman, R.W.; Goodwin, G.M.; Maziasz, P.J.; Bolling, E.

    1988-08-01

    The results of screening tests on alloys from three compositional groups are summarized and compared to the alloy design and performance criteria identified as needed for austenitic alloys suitable as superheater/reheater tubing in advanced heat recovery systems. The three alloy groups included lean (nominally 14% Cr and 16% Ni) austenitic stainless steels that were modifications of type 316 stainless steel, 20Cr-30Ni-Fe alloys that were modifications of alloy 800H, and Ni-Cr aluminides, (Ni,Cr)/sub 3/Al. The screening tests covered fabricability, mechanical properties, weldability, and oxidation behavior. The lean stainless steels were found to possess excellent strength and ductility if cold-worked to an equivalent strain in the range 5 to 10% prior to testing. However, they possessed marginal weldability, poor oxidation resistance, and sensitivity to aging. The modified alloy 800H alloys also exhibited good strength and ductility in the cold-worked condition. The weldability was marginal, while the oxidation resistance was good. The aluminides were difficult to fabricate by methods typically used to produce superheater tubing alloys. The alloys that could be worked had marginal strength and ductility. An aluminide cast alloy, however, was found to be very strong and ductile. 23 refs., 19 figs., 13 tabs.

  11. An initial inverse calibration of the ground-water flow model for the Hanford unconfined aquifer

    SciTech Connect

    Jacobson, E.A. . Desert Research Inst.); Freshly, M.D. )

    1990-03-01

    Large volumes of process cooling water are discharged to the ground form U.S. Department of Energy (DOE) nuclear fuel processing operations in the central portion of the Hanford Site in southeastern Washington. Over the years, these large volumes of waste water have recharged the unconfined aquifer at the Site. This artificial recharge has affected ground-water levels and contaminant movement in the unconfined aquifer. Ground-water flow and contaminant transport models have been applied to assess the impacts of site operations on the rate and direction of ground-water flow and contaminant transport in unconfined aquifer at the Hanford Site. The inverse calibration method developed by Neuman and modified by Jacobson was applied to improve calibration of a ground-water flow model of the unconfined aquifer at the Hanford Site. All information about estimates of hydraulic properties of the aquifer, hydraulic heads, boundary conditions, and discharges to and withdrawals form the aquifer is included in the inverse method to obtain an initial calibration of the ground-water flow model. The purpose of this report is to provide a description of the inverse method, its initial application to the unconfined aquifer at Hanford, and to present results of the initial inverse calibration. 28 refs., 19 figs., 1 tab.

  12. Ground-water monitoring compliance projects for Hanford Site facilities: Progress report for the period January 1--March 31, 1988: Volume 1, Text

    SciTech Connect

    Not Available

    1988-05-01

    This report describes the progress of eight Hanford Site ground-water monitoring projects for the period January 1 to March 31, 1988. The facilities represented by the eight projects are the 300 Area Process trenches, 183-H Solar Evaporation Basins, 200 Areas Low-Level Burial Grounds, Nonradioactive Dangerous Waste Landfill, 216-A-36B Crib, 1301-N Liquid Waste Disposal Facility, 1325-N Liquid Waste Disposal Facility, and 1324-N/NA Surface Impoundment and Percolation Ponds. The latter four projects are included in this series of quarterly reports for the first time. This report is the seventh in a series of periodic status reports; the first six cover the period from May 1, 1986, through December 31, 1987 (PNL 1986; 1987a, b, c, d; 1988a). This report satisfies the requirements of Section 17B(3) of the Consent Agreement and Compliance Order issued by the Washington State Department of Ecology (1986a) to the US Department of Energy-Richland Operations Office. 13 refs., 19 figs., 24 tabs.

  13. Nevada Nuclear Waste Storage Investigations: Exploratory Shaft Facility fluids and materials evaluation

    SciTech Connect

    West, K.A.

    1988-11-01

    The objective of this study was to determine if any fluids or materials used in the Exploratory Shaft Facility (ESF) of Yucca Mountain will make the mountain unsuitable for future construction of a nuclear waste repository. Yucca Mountain, an area on and adjacent to the Nevada Test Site in southern Nevada, USA, is a candidate site for permanent disposal of high-level radioactive waste from commercial nuclear power and defense nuclear activities. To properly characterize Yucca Mountain, it will be necessary to construct an underground test facility, in which in situ site characterization tests can be conducted. The candidate repository horizon at Yucca Mountain, however, could potentially be compromised by fluids and materials used in the site characterization tests. To minimize this possibility, Los Alamos National Laboratory was directed to evaluate the kinds of fluids and materials that will be used and their potential impacts on the site. A secondary objective was to identify fluids and materials, if any, that should be prohibited from, or controlled in, the underground. 56 refs., 19 figs., 11 tabs.

  14. Cumulative Effects of Micro-Hydro Development on the Fisheries of the Swan River Drainage, Montana, Volume I, Summary, 1983-1984 Final Report.

    SciTech Connect

    Leathe, Stephen A.; Enk, Michael D.

    1985-04-01

    This study was designed to develop and apply methods to evaluate the cumulative effects of 20 proposed small hydro projects on the fisheries resources of the Swan River drainage located in northwestern Montana. Fish population and reach classification information was used to estimate total populations of 107,000 brook trout, 65,000 cut-throat trout and 31,000 juvenile bull trout within the tributary system. Distribution, abundance, and life history of fish species in the drainage and their contribution to the sport fishery were considered in the cumulative impact analysis. Bull trout were chosen as the primary species of concern because of their extensive use of project areas, sensitivity to streambed sedimentation, and their importance to the lake and river sport fisheries. Dewatering of hydroelectric diversion zones and streambed sedimentation (resulting from forest and small hydro development) were the major impacts considered. The developer proposed to divert up to the entire streamflow during low flow months because maintenance of recommended minimum bypass flows would not allow profitable project operation. Dewatering was assumed to result in a total loss of fish production in these areas. 105 refs., 19 figs., 38 tabs.

  15. The depth of the oil/brine interface and crude oil leaks in SPR caverns

    SciTech Connect

    Heffelfinger, G.S.

    1991-06-01

    Monitoring wellhead pressure evolution is the best method of detecting crude oil leaks in SPR caverns while oil/brine interface depth measurements provide additional insight. However, to fully utilize the information provided by these interface depth measurements, a thorough understanding of how the interface movement corresponds to cavern phenomena, such as salt creep, crude oil leakage, and temperature equilibration, as well as to wellhead pressure, is required. The time evolution of the oil/brine interface depth is a function of several opposing factors. Cavern closure due to salt creep and crude oil leakage, if present, move the interface upward. Brine removal and temperature equilibration of the oil/brine system move the interface downward. Therefore, the relative magnitudes of these factors determine the net direction of interface movement. Using a mass balance on the cavern fluids, coupled with a simplified salt creep model for closure in SPR caverns, the movement of the oil/brine interface has been predicted for varying cavern configurations, including both right-cylindrical and carrot-shaped caverns. Three different cavern depths and operating pressures have been investigated. In addition, the caverns were investigated at four different points in time, allowing for varying extents of temperature equilibration. Time dependent interface depth changes of a few inches to a few feet were found to be characteristic of the range of cases studied. 5 refs, 19 figs., 1 tab.

  16. A numerical theory of lattice gas and lattice Boltzmann methods in the computation of solutions to nonlinear advective-diffusive systems

    SciTech Connect

    Elton, A.B.H.

    1990-09-24

    A numerical theory for the massively parallel lattice gas and lattice Boltzmann methods for computing solutions to nonlinear advective-diffusive systems is introduced. The convergence theory is based on consistency and stability arguments that are supported by the discrete Chapman-Enskog expansion (for consistency) and conditions of monotonicity (in establishing stability). The theory is applied to four lattice methods: Two of the methods are for some two-dimensional nonlinear diffusion equations. One of the methods is for the one-dimensional lattice method for the one-dimensional viscous Burgers equation. And one of the methods is for a two-dimensional nonlinear advection-diffusion equation. Convergence is formally proven in the L{sub 1}-norm for the first three methods, revealing that they are second-order, conservative, conditionally monotone finite difference methods. Computational results which support the theory for lattice methods are presented. In addition, a domain decomposition strategy using mesh refinement techniques is presented for lattice gas and lattice Boltzmann methods. The strategy allows concentration of computational resources on regions of high activity. Computational evidence is reported for the strategy applied to the lattice gas method for the one-dimensional viscous Burgers equation. 72 refs., 19 figs., 28 tabs.

  17. An approach to estimating radiological risk of offsite release from a design basis earthquake for the Process Experimental Pilot Plant (PREPP)

    SciTech Connect

    Lucero, V.; Meale, B.M.; Reny, D.A.; Brown, A.N.

    1990-09-01

    In compliance with Department of Energy (DOE) Order 6430.1A, a seismic analysis was performed on DOE's Process Experimental Pilot Plant (PREPP), a facility for processing low-level and transuranic (TRU) waste. Because no hazard curves were available for the Idaho National Engineering Laboratory (INEL), DOE guidelines were used to estimate the frequency for the specified design-basis earthquake (DBE). A dynamic structural analysis of the building was performed, using the DBE parameters, followed by a probabilistic risk assessment (PRA). For the PRA, a functional organization of the facility equipment was effected so that top events for a representative event tree model could be determined. Building response spectra (calculated from the structural analysis), in conjunction with generic fragility data, were used to generate fragility curves for the PREPP equipment. Using these curves, failure probabilities for each top event were calculated. These probabilities were integrated into the event tree model, and accident sequences and respective probabilities were calculated through quantification. By combining the sequences failure probabilities with a transport analysis of the estimated airborne source term from a DBE, onsite and offsite consequences were calculated. The results of the comprehensive analysis substantiated the ability of the PREPP facility to withstand a DBE with negligible consequence (i.e., estimated release was within personnel and environmental dose guidelines). 57 refs., 19 figs., 20 tabs.

  18. Columbia River pathway report: phase I of the Hanford Environmental Dose Reconstruction Project

    SciTech Connect

    Not Available

    1991-07-01

    This report summarizes the river-pathway portion of the first phase of the Hanford Environmental Dose Reconstruction (HEDR) Project. The HEDR Project is estimating radiation doses that could have been received by the public from the Department of Energy's Hanford Site, in southeastern Washington State. Phase 1 of the river-pathway dose reconstruction effort sought to determine whether dose estimates could be calculated for populations in the area from above the Hanford Site at Priest Rapids Dam to below the site at McNary Dam from January 1964 to December 1966. Of the potential sources of radionuclides from the river, fish consumption was the most important. Doses from drinking water were lower at Pasco than at Richland and lower at Kennewick than at Pasco. The median values of preliminary dose estimates calculated by HEDR are similar to independent, previously published estimates of average doses to Richland residents. Later phases of the HEDR Project will address dose estimates for periods other than 1964--1966 and for populations downstream of McNary Dam. 17 refs., 19 figs., 1 tab.

  19. Preliminary design report: Babcock and Wilcox BR-100 100-ton rail/barge spent fuel shipping cask

    SciTech Connect

    1990-02-01

    The purpose of this document is to provide information on burnup credit as applied to the preliminary design of the BR-100 shipping cask. There is a brief description of the preliminary basket design and the features used to maintain a critically safe system. Following the basket description is a discussion of various criticality analyses used to evaluate burnup credit. The results from these analyses are then reviewed in the perspective of fuel burnups expected to be shipped to either the final repository or a Monitored Retrievable Storage (MRS) facility. The hurdles to employing burnup credit in the certification of any cask are then outlines and reviewed. the last section gives conclusions reached as to burnup credit for the BR-100 cask, based on our analyses and experience. All information in this study refers to the cask configured to transport PWR fuel. Boiling Water Reactor (BWR) fuel satisfies the criticality requirements so that burnup credit is not needed. All calculations generated in the preparation of this report were based upon the preliminary design which will be optimized during the final design. 8 refs., 19 figs., 16 tabs.

  20. Final environmental information volume for the coke oven gas cleaning project at the Bethlehem Steel Corporation Sparrows Point Plant

    SciTech Connect

    Not Available

    1990-04-24

    Bethelehem Steel Corporation (BSC) is planning to conduct a demonstration project involving an integrated system that can be retrofitted into coke oven gas handling systems to address a variety of environmental and operational factors in a more cost-effective manner. Successful application of this technology to existing US coke plants could: (1) reduce emissions of sulfur dioxide, cyanide, and volatile organic compounds (including benzene) (2) reduce the cost and handling of processing feed chemicals, (3) disposal costs of nuisance by-products and (4) increase reliability and reduce operation/maintenance requirements for coke oven gas desulfurization systems. The proposed system will remove sulfur from the coke oven gas in the form of hydrogen sulfide using the ammonia indigenous to the gas as the primary reactive chemical. Ammonia and hydrogen cyanide are also removed in this process. The hydrogen sulfide removed from the coke oven gas in routed to a modified Claus plant for conversion to a saleable sulfur by-product. Ammonia and hydrogen cyanide will be catalytically converted to hydrogen, nitrogen, carbon dioxide, and carbon monoxide. The tail gas from the sulfur recovery unit is recycled to the coke oven gas stream, upstream of the new gas cleaning system. The proposed demonstration project will be installed at the existing coke oven facilities at BSC's Sparrows Point Plant. This volume describes the proposed actions and the resulting environmental impacts. 21 refs., 19 figs., 9 tabs.

  1. Site study plan for Upper Aquifer Hydrology Clusters, Deaf Smith County Site, Texas: Surface-based geotechnical field program: Preliminary draft

    SciTech Connect

    Not Available

    1988-01-01

    As part of site characterization studies, at the Deaf Smith County site, Texas, 15 wells at 5 locations will be completed in the Ogallala Formation and Dockum Group. The purposes of the wells, which are called Upper Aquifer (2) establish background hydrologic and water quality conditions, (3) provide analysis, (4) monitor responses of the shallow hydrologic system to site activities and nearby pumpage for irrigation, (5) collect water samples from both saturated and unsaturated materials to help define recharge rates and ground-water flow patterns, (6) monitor variations on water quality, and (7) define ground-water resources near the site. The test wells will be installed during a 14-month period starting about 1-1/2 years after site characterization activities begin. The Technical Field Services Contractor is responsible for conducting the field program of drilling and testing. Samples and data will be handled and reported in accordance with established Salt Repository Project procedures. A quality assurance program will assure that activities affecting quality are performed correctly and that the appropriate documentation is maintained. 44 refs., 19 figs., 5 tabs.

  2. Molten carbonate fuel cell technology improvement. [25 kW

    SciTech Connect

    Not Available

    1990-09-01

    This report summarizes the work performed under Department of Energy Contract AC21-87MC23270 during the period March 1, through May 30, 1990. The overall objective of this program is to define a competitive CG/MCFC power plant and the associated technology development requirements and to develop an improved cell configuration for molten carbonate fuel cells which has improved performance, has reduced cell creep and electrolyte management consistent with 40,000 hour projected life, reduces existing cell cost, and is adaptable to a range of power plant applications. The 8-ft{sup 2} 20-cell, 25-kW stack assembly and installation in the test facility were completed. Testing of the stack was started and 896 hours of test time were reached. Manifold seal development focused on a seal to reduce electrolyte transport and test rigs were initiated for shunt current and seal leakage evaluation. Development on sheet metal parts was initiated with focus on improved aluminization for separator plate corrosion protection and nickel clad stainless steel for the anode current collector. Development of porous parts was initiated with focus on an alternative binder for the electrodes. Design of a laboratory scale continuous debinding oven was completed. Development of an improved material blend for the matrix was also initiated. 19 figs., 2 tabs.

  3. Thin-film cadium telluride solar cells: Annual subcontract report, 1 May 1986-31 May 1987

    SciTech Connect

    Chu, T.L.

    1987-10-01

    Cadmium telluride, with a room-temperature band-gap energy of 1.5 eV, is a promising thin-film photovoltaic material. The major objective of this research has been to demonstrate thin-film CdTe heterojunction solar cells with a total area greater than 1 cm/sup 2/ and photovoltaic efficiencies of 13% or more. Thin-film p-CdTe/CdS/SnO/sub 2/:F/glass solar cells with an AM1.5 efficiency of 10.5% have been reported previously. This report contains results of work done on (1) the deposition, resistivity control, and characterization of p-CdTe films by the close-spaced sublimation process; (2) the deposition of large-band-gap window materials; (3) the electrical properties of CdS/CdTe heterojunctions; (4) the formation of stable, reproducible, ohmic contacts (such as p-HgTe) to p-CdTe; and (5) the preparation and evaluation of heterojunction solar cells. 16 refs., 19 figs., 1 tab.

  4. Map models of the transition to turbulence in two and three dimensional pipe flow

    SciTech Connect

    Viecelli, J.A.

    1986-02-03

    Couette flow, at least when the outer cylinder is fixed, seems to be yielding gradually to theoretical analysis, but Couette flow with the outer cylinder rotating, and Poiseuille flow are sill not so well understood. These latter cases exhibit a snap transition from laminar to turbulent flow which is not very well explained by the traditional theory. Certainly, the predictions of linearized stability theory do not agree with observed transition Reynolds numbers, and although a number of nonlinear theories have evolved, they have not been more successful. Especially difficult from the viewpoint of traditional theory is the existence of intermittency; near the Reynolds number at which the flow snaps from laminar to turbulent short burst of turbulence spaced at random intervals are observed. Here I report on more studies of the properties of dissipative coupled implicit map models; how they are related to a stochastic model of turbulence, and to the Navier-Stokes equations. Power spectra of the solutions and comparisons of the implicit map model predictions with experimental observations are included. Bifurcation diagrams, velocity profiles, and flow resistance coefficients are covered. Finally, some findings on the general shape of velocity return maps for pipe flow are discussed. 12 refs., 19 figs., 1 tab.

  5. Theoretical study of the structure, energetics, and dynamics of silicon and carbon systems using tight-binding approaches

    SciTech Connect

    Xu, Chunhui.

    1991-10-25

    Semiempirical interatomic potentials are developed for silicon and carbon by modeling the total energy of the system using tight-binding approaches. The parameters of the models were obtained by fitting to results from accurate first-principles Local Density Functional calculations. Applications to the computation of phonons as a function of volume for diamond-structured silicon and carbon and the thermal expansions for silicon and diamond yields results which agree well with experiment. The physical origin of the negative thermal expansion observed in silicon is explained. A tight-binding total energy model is generated capable of describing carbon systems with a variety of atomic coordinations and topologies. The model reproduces the total energy versus volume curves of various carbon polytypes as well as phonons and elastic constants of diamond and graphite. The model has also been used in the molecular-dynamics simulation of the properties of carbon clusters. The calculated ground-state geometries of small clusters (C{sub 2}--C{sub 10}) correlates well with results from accurate quantum chemical calculations, and the structural trend of clusters from C{sub 2} to C{sub 60} are investigated. 67 refs., 19 figs.

  6. A review of geoscience characteristics and disposal experience at the commercial low-level radioactive waste disposal facility near West Valley, New York

    SciTech Connect

    Smoot, J.L.

    1989-08-01

    The West Valley Commercial Low-Level Radioactive Waste disposal site is located about 48 km south of Buffalo, New York. Operation of the site began in 1961 by Nuclear Fuels Service and was terminated in 1975. The disposal trenches at the site are excavated about 5 m into glacial till that has a thickness of about 28 m. About 65,000 m{sup 3} of the waste containing approximately 710,000 Ci were disposed at the site during the operational period. Ground-water movement through the till is predominantly downward as indicated by measurements and numerical simulation of hydraulic head. Radionuclides do not appear to have migrated more than 3 m either laterally or vertically from the waste disposal trenches. Numerical simulations of {sup 3}H, {sup 90}Sr, and {sup 14}C migration are able to reproduce the observed concentration in the till beneath selected trenches. Uncertainty remains with respect to the continuity and heterogeneity of the hydrostratigraphic units and the spatial distribution of hydraulic conductivity and effective porosity. More work is needed to better define the waste inventory and any long-term changes that might be expected. Erosion poses a potential threat to the long-term integrity of the disposal area. 56 refs., 19 figs., 9 tabs.

  7. Geological history of the Flemish Pass Basin, offshore Newfoundland

    SciTech Connect

    Foster, D.G.; Robinson, A.G. )

    1993-04-01

    In this paper the authors present a seismic-stratigraphic interpretation of the Mesozoic and Tertiary geologic history of the Flemish Pass Basin, offshore Newfoundland, based on seismic data and data from seven wells that were integrated on the BP subsurface integrated interpretation system (SIIS). Four megasequences are identified. Megasequence 1 (MSI) is Triassic to lower Berriasian, and includes poorly known sediments associated with Triassic-Early Jurrasic rifting prior to spreading between the North African and American continents. The uppermost mappable unconformity-bounded unit within MSI contains major Kimmeridgian to Portlandian marine source rocks deposited in two east-west-trending subbasins in the Baccalieu and Gabriel areas. During the early Berrasian, pronounced rifting linked to the subsequent spreading of Iberia from the Grand Banks (Barremian-Aptian) led to regional deepening and deposition of clastic sediments (MS2) in two northeast-southwest-trending, fault-bounded subbasins in the Baccalieu and Gabriel areas. In the Aptian, Early Cretaceous subbasins were inverted due to strike-slip movement as extension assumed a northeast-southwest orientation prior to movement of Greenland/Europe away from Labrador (Albian). MS3 sediments fill northwest-southeast trending fault-bounded depocenters typically located on areas that had formed highs during Early Cretaceous. Postrift sedimentation continued from the Albian( ) to the present with Upper Cretaceous pelagic limestone and later clastic sediment deposition. 37 refs., 19 figs., 1 tab.

  8. Estimation of fracture toughness of cast stainless steels in LWR (light water reactor) systems

    SciTech Connect

    Chopra, O.K.

    1990-10-01

    A procedure and correlations are presented for predicting fracture toughness J-R curves and impact strength of aged cast stainless steels from known material information. The saturation'' fracture toughness of a specific cast stainless steel, i.e., the minimum fracture toughness that would ever be achieved for the material after long-term service, is estimated from the degree of embrittlement at saturation. Degree of embrittlement is characterized in terms of room-temperature Charpy-impact energy. The variation of the impact energy at saturation for different materials is described in terms of a material parameter {Phi}, which is determined from the chemical composition and ferrite morphology. The fracture toughness J-R curve for the material is then obtained from correlations between room-temperature Charpy-impact energy and fracture toughness. Fracture toughness as a function of time and temperature of reactor service is estimated from the kinetics of embrittlement, which is determined from the chemical composition. Examples for estimating impact strength and fracture toughness of cast stainless steel components during reactor service are described. A common lower-bound'' J-R curve for cast stainless steels with unknown chemical composition is also defined. 15 refs., 19 figs., 3 tabs.

  9. HUDU: The Hanford Unified Dose Utility computer code

    SciTech Connect

    Scherpelz, R.I.

    1991-02-01

    The Hanford Unified Dose Utility (HUDU) computer program was developed to provide rapid initial assessment of radiological emergency situations. The HUDU code uses a straight-line Gaussian atmospheric dispersion model to estimate the transport of radionuclides released from an accident site. For dose points on the plume centerline, it calculates internal doses due to inhalation and external doses due to exposure to the plume. The program incorporates a number of features unique to the Hanford Site (operated by the US Department of Energy), including a library of source terms derived from various facilities' safety analysis reports. The HUDU code was designed to run on an IBM-PC or compatible personal computer. The user interface was designed for fast and easy operation with minimal user training. The theoretical basis and mathematical models used in the HUDU computer code are described, as are the computer code itself and the data libraries used. Detailed instructions for operating the code are also included. Appendices to the report contain descriptions of the program modules, listings of HUDU's data library, and descriptions of the verification tests that were run as part of the code development. 14 refs., 19 figs., 2 tabs.

  10. SRS: Site ranking system for hazardous chemical and radioactive waste

    SciTech Connect

    Rechard, R.P.; Chu, M.S.Y.; Brown, S.L.

    1988-05-01

    This report describes the rationale and presents instructions for a site ranking system (SRS). SRS ranks hazardous chemical and radioactive waste sites by scoring important and readily available factors that influence risk to human health. Using SRS, sites can be ranked for purposes of detailed site investigations. SRS evaluates the relative risk as a combination of potentially exposed population, chemical toxicity, and potential exposure of release from a waste site; hence, SRS uses the same concepts found in a detailed assessment of health risk. Basing SRS on the concepts of risk assessment tends to reduce the distortion of results found in other ranking schemes. More importantly, a clear logic helps ensure the successful application of the ranking procedure and increases its versatility when modifications are necessary for unique situations. Although one can rank sites using a detailed risk assessment, it is potentially costly because of data and resources required. SRS is an efficient approach to provide an order-of-magnitude ranking, requiring only readily available data (often only descriptive) and hand calculations. Worksheets are included to make the system easier to understand and use. 88 refs., 19 figs., 58 tabs.

  11. Evidence for enhanced boundary mixing in the Santa Monica Basin

    SciTech Connect

    Ledwell, J.R.; Hickey, B.M.

    1995-10-15

    Transients in the heat content in Santa Monica and San Pedro Basins imply a basin-wide diapycnal eddy diffusivity greater than 1 cm{sup 2}/s. This is significantly larger than the value for SF{sub 6} of 0.25 {+-} 0.08 cm{sup 2}/s determined for the interior of Santa Monica Basin for September 1985 to February 1986 by Ledwell and Watson. However, the exodus of SF{sub 6} from Santa Monica Basin after February 1986, by which time the tracer had mixed to the boundaries of the basin, was fast enough to be consistent with a greatly enhanced vertical flux. Since the kinetic energy in the basin had not changed significantly, it is unlikely that a temporal increase in forcing resulted in enhanced fluxes in the interior of the basin. The most likely interpretation is that diapycnal fluxes in the basin are dominated by processes in the boundary regions. Temperature and SF{sub 6} profiles from near the edges of the basin do not give conclusive evidence either for or against such enhanced mixing. 20 refs., 19 figs., 5 tabs.

  12. Effects of acidic precipitation on the water quality of streams in the Larel Hill area, Somerset County, Pennsylvania, 1983-86

    SciTech Connect

    Barker, J.L.; Witt, E.C.

    1990-01-01

    Five headwater streams in the Laurel Hill area in southwestern Pennsylvania were investigated from September 1983 through February 1986 to determine possible effects of acidic precipitation on water quality. Precipitation in the Larel Hill area is among the most acidic in the Nation, with a mean volume-weighted pH of 4.06. Sulfate is the dominant acid-forming anion, averaging 3.6 mg/L or about 50 kg/hectare in wet deposition alone. Nitrate averages about 2 mg/L or 7 kg/hectare in the study area. Stream chemistry in the five streams is quite variable and apparently is influenced to a large degree by the bedrock geology and by small amounts of alkaline material in watershed soils. Three of the five streams with no or little acid-neutralizing capacity present are devoid of fish because of low pH and elevated aluminum concentrations. Aluminum concentrations increase in the other two streams during rainfall and snowmelt despite comparatively higher base flow and acid-neutralizing capacities. Comparison of the chemistry of streamflow during 14 storm events at South Fork Bens Creek and North Bens creek reveals similar chemical responses when discharge suddenly increases. concentrations of dissolved metals and sulfate increased during stormflow and snowmelt runoff, whereas concentrations of base cations, silica, and chloride decreased. Nitrate concentrations were not affected by rainfall runoff, but tended to increase with snowmelt runoff. 36 refs., 19 figs., 15 tabs.

  13. Design and operation of an automatic pressure tracking adiabatic calorimeter (APTAC)

    SciTech Connect

    Young, M.A.; Chippett, S.

    1995-12-31

    Since 1987, Union Carbide has steadily developed a high-quality, low-thermal inertia calorimeter based upon the DIERS bench-scale apparatus concept. The resulting device, known as the APTAC, makes full use of microcomputer-based instrument control and data acquisition. The nature and quality of the data obtained have been routinely critiqued regarding their suitability for kinetic model development, rather than for use with simple empirical design methodologies. The design elements required for accurate and versatile machine operation are noted, and the design rationale for the various components is given. The hardware and software used for computer control and data acquisition are described. To illustrate the benefits of the APTAC design, a range of challenging techniques are documented. In general, commercially available calorimeters do not have the capability of the APTAC to perform experiments requiring low self heat rate detection, reactant injections, vented operation, and gas/solid phase reactions. Illustrative examples of each of these techniques are documented. The flexibility of the design and the operating stability over a wide range of self heat rates are also shown. 10 refs., 19 figs., 1 tab.

  14. Vegetation of the Savannah River Site: Major community types

    SciTech Connect

    Workman, S.W.; McLeod, K.W.

    1990-01-01

    The eight major plant community types of the Savannah River Site (SRS) are distributed along topographic and moisture gradients and strongly controlled by local management practices. Communities range from sandhill communities in the xeric uplands to bottomland or swamp forests in low-lying areas subject to periodic flooding. The variety of community types and extensive land area (78,000 ha) of the SRS provides habitat for a diversity of plant species. As a National Environmental Research Park, the SRS provides an area for study of man-altered systems in relation to natural systems. A site-wide Set-Aside Areas program designates specific parcels of land representing different community types on the SRS. These areas conserve habitat for plants and wildlife, including some endangered, threatened and rare species. This document provides descriptions, including community characteristics and species composition, for the eight major vegetation communities of the SRS (old field, sandhill, upland hardwood, pinelands, bottomland, swamp, Carolina bay and fresh water). Species lists of tree, shrub, vine, herbaceous, and lower plant species of the SRS, by community type, were compiled from existing literature, herbarium information, and solicited additions from researchers familiar with SRS vegetation; these are provided in appendices. 130 refs., 19 figs.

  15. Coal use in the People`s Republic of China. Volume 1: Environmental impacts

    SciTech Connect

    Bhatti, N.; Tompkins, M.M.; Carlson, J.L. |; Simbeck, D.R. |

    1994-11-01

    The People`s Republic of China (hereafter referred to as China) is the largest producer and consumer of coal in the world. Coal makes up 76% and 74% of China`s primary energy consumption and production, respectively. This heavy dependence on coal has come at a high price for China, accounting for a large share of its environmental problems. This report examines the dominance of coal in China`s energy balance, its impact on the environment, and the need for technical and financial assistance, specifically for two distinct aspects: the effect of coal use on the environment and the importance of coal to China`s economy. The results of the analysis are presented in two volumes. Volume 1 focuses on full fuel cycle coal emissions and the environmental effects of coal consumption. Volume 2 provides a detailed analysis by sector of China`s economy and examines the economic impact of constraints on coal use. 51 refs., 19 figs., 15 tabs.

  16. Continuous irradiation induced luminescence from benzophenone, 4,4{prime}-dichlorobenzophenone, and 4-(dimethylamino)benzaldehyde in solid environments and its pressure dependence

    SciTech Connect

    Dreger, Z.A.; Drickamer, H.G.

    1997-02-20

    We report a strong emission change induced by continuous light irradiation in two ketones, benzophenone and 4,4{prime}-dichlorobenzophenone, and an aldehyde, 4-(dimethylamino)benzaldehyde, in their crystalline state as well as dissolved in solid polymers. With prolonged laser irradiation, a time evolution of the emission intensity shows complex features, but two clear competing trends can be distinguished: an increase and/or decrease of the emission intensity. It is shown that these trends may be a result of creation of either an emissive or a nonemissive species. The relative importance of these two pathways is significantly dependent on the type of medium and external pressure. The most characteristic feature of these dependencies is the fact that in crystalline environments, in contrast to polymers, the emission intensity at all pressures only decreases. A kinetic model is developed that assumes the lowest triplet state as the origin of the high photoreactivity of these molecules, causing their emission intensity change. This model embraces the observations either in crystalline or polymeric environments and is solved for two limiting cases: a predominance of the hydrogen abstraction reaction from the polymer or a predominance of the ionization due to biphotonic excitation of the triplet state. These processes are assumed responsible, respectively, for the creation of emissive and nonemissive photoproducts. 29 refs., 19 figs., 2 tabs.

  17. Assessment of Smolt Condition for Travel Time Analysis, 1989 Annual Report.

    SciTech Connect

    Beeman, John W.; Rondorf, Dennis W.; Faler, Joyce C.

    1990-11-01

    The Water Budget is a volume of water used to enhance environmental conditions (flows) in the Columbia and Snake rivers for juvenile salmonids during their seaward migration. To manage the Water Budget, the Fish Passage Center estimates travel times of juvenile salmonids in index reaches of the main-stem rivers, using information on river flows and the migrational characteristics of the juvenile salmonids. This study was initiated to provide physiological information on the juvenile salmonids used for these travel time estimates. The physiological ability to respond to stressors was evaluated by measuring concentrations of plasma cortisol, glucose, and chlorides before and after a 30-s handling-stress challenge test. The development of smoltification was assessed by measuring gill Na{sup +}--K{sup +} ATPase activity and plasma thyroxine concentrations. Prevalence of bacterial kidney disease in spring chinook salmon was generally higher than in 1988, ranging from 81--100{percent} using an enzyme-linked immunosorbent assay (ELISA) method. Fish from Snake River hatcheries had more severe infections than those from mid-Columbia hatcheries. 42 refs., 19 figs., 4 tabs.

  18. Damage tolerance evaluation of PEEK (polyether ether ketone) composites: Final report

    SciTech Connect

    Frazier, J.L.

    1988-12-01

    A polyether ether ketone (PEEK) thermoplastic system is currently being evaluated in flight service as a structural element for the US Air Force C-130 transport plane. The particular structure under study is the C-130 belly skin, a fuselage panel that is located on the underside of the aircraft and is subjected to impact from runway debris. A current Air Force objective is to reduce maintenance and replacement requirements of aircraft using lightweight composite structures to replace or supplement existing metal alloy components. The incorporation of lighter weight composite structures would result in aircraft weight reductions, allowing greater range and fuel economy. The impact-damage susceptibility of composite structures often results in strain-limited application of composite materials where the mechanical properties' advantages over traditional metal alloys are not attained. Methods developed to enhance the damage tolerance of composite material systems should increase their potential uses in existing and future aircraft. A materials evaluation program was conducted to determine the possible benefits of interleaving thermoplastic film layers between the plies of a PEEK/graphite composite material system to produce a material system with increased resistance to impact damage. Several laminate designs incorporating PEEK thermoplastic film as an interleaf material were subjected to impacts of various energies and projectile velocities. Mechanical properties of unimpacted, open-hole, and impacted laminate panels were measured to determine the effectiveness of the interleaf concept for improving damage tolerance relative to the existing baseline material. 5 refs., 19 figs., 8 tabs.

  19. Advanced commercial tokamak study

    SciTech Connect

    Thomson, S.L.; Dabiri, A.E.; Keeton, D.C.; Brown, T.G.; Bussell, G.T.

    1985-12-01

    Advanced commercial tokamak studies were performed by the Fusion Engineering Design Center (FEDC) as a participant in the Tokamak Power Systems Studies (TPSS) project coordinated by the Office of Fusion Energy. The FEDC studies addressed the issues of tokamak reactor cost, size, and complexity. A scoping study model was developed to determine the effect of beta on tokamak economics, and it was found that a competitive cost of electricity could be achieved at a beta of 10 to 15%. The implications of operating at a beta of up to 25% were also addressed. It was found that the economics of fusion, like those of fission, improve as unit size increases. However, small units were found to be competitive as elements of a multiplex plant, provided that unit cost and maintenance time reductions are realized for the small units. The modular tokamak configuration combined several new approaches to develop a less complex and lower cost reactor. The modular design combines the toroidal field coil with the reactor structure, locates the primary vacuum boundary at the reactor cell wall, and uses a vertical assembly and maintenance approach. 12 refs., 19 figs.

  20. Ventilation Measurements in Energy-Efficient Multifamily Dwelling Units in the Pacific Northwest Region.

    SciTech Connect

    Parker, Graham Bradley

    1990-03-01

    A ventilation field measurement study was conducted during the 1986/1987 and 1987/1988 heating seasons in 39 energy-efficient multifamily dwelling units. Four buildings, two in eastern Washington and two in western Washington, were involved in the study. The purpose of the study was to determine the total and baseline (natural) air exchange rates in units representing energy-efficient construction in the multifamily sector of the Pacific Northwest. This information will be used to aid in the development of future construction codes and standards. The air exchange rate was measured a multiple perfluorocarbon tracer (PFT) technique. Most measurements were taken over a 2- to 4-week period, with a few measurements taken over a period of one to three consecutive months. The PFT technique allows one to determine the fresh air flow into any unit within a building as well as the air flow between adjacent units. In addition, the volumetric air flow and usage of the mechanical ventilation system installed in the units were measured. Temperature, weather, structure, and occupancy data were also collected. 12 refs., 19 figs., 14 tabs.

  1. Chemistry of heavy ion reactions

    SciTech Connect

    Hoffman, D.C.

    1988-10-01

    The use of heavy ions to induce nuclear reactions was reported as early as 1950. Since that time it has been one of the most active areas of nuclear research. Intense beams of ions as heavy as uranium with energies high enough to overcome the Coulomb barriers of even the heaviest elements are available. The wide variety of possible reactions gives rise to a multitude of products which have been studied by many ingenious chemical and physical techniques. Chemical techniques have been of special value for the separation and unequivocal identification of low yield species from the plethora of other nuclides present. Heavy ion reactions have been essential for the production of the trans-Md elements and a host of new isotopes. The systematics of compound nucleus reactions, transfer reactions, and deeply inelastic reactions have been elucidated using chemical techniques. A review of the variety of chemical procedures and techniques which have been developed for the study of heavy ion reactions and their products is given. Determination of the chemical properties of the trans-Md elements, which are very short-lived and can only be produced an ''atom-at-a-time'' via heavy ion reactions, is discussed. 53 refs., 19 figs.

  2. Heat capacity measurements of atoms and molecules adsorbed on evaporated metal films

    SciTech Connect

    Kenny, T.W.

    1989-05-01

    Investigations of the properties of absorbed monolayers have received great experimental and theoretical attention recently, both because of the importance of surface processes in practical applications such as catalysis, and the importance of such systems to the understanding of the fundamentals of thermodynamics in two dimensions. We have adapted the composite bolometer technology to the construction of microcalorimeters. For these calorimeters, the adsorption substrate is an evaporated film deposited on one surface of an optically polished sapphire wafer. This approach has allowed us to make the first measurements of the heat capacity of submonolayer films of /sup 4/He adsorbed on metallic films. In contrast to measurements of /sup 4/He adsorbed on all other insulating substrates, we have shown that /sup 4/He on silver films occupies a two-dimensional gas phase over a broad range of coverages and temperatures. Our apparatus has been used to study the heat capacity of Indium flakes. CO multilayers, /sup 4/He adsorbed on sapphire and on Ag films and H/sub 2/ adsorbed on Ag films. The results are compared with appropriate theories. 68 refs., 19 figs.

  3. System for conversion between the boundary representation model and a constructive solid geometry model of an object

    DOEpatents

    Christensen, N.C.; Emery, J.D.; Smith, M.L.

    1985-04-29

    A system converts from the boundary representation of an object to the constructive solid geometry representation thereof. The system converts the boundary representation of the object into elemental atomic geometrical units or I-bodies which are in the shape of stock primitives or regularized intersections of stock primitives. These elemental atomic geometrical units are then represented in symbolic form. The symbolic representations of the elemental atomic geometrical units are then assembled heuristically to form a constructive solid geometry representation of the object usable for manufacturing thereof. Artificial intelligence is used to determine the best constructive solid geometry representation from the boundary representation of the object. Heuristic criteria are adapted to the manufacturing environment for which the device is to be utilized. The surface finish, tolerance, and other information associated with each surface of the boundary representation of the object are mapped onto the constructive solid geometry representation of the object to produce an enhanced solid geometry representation, particularly useful for computer-aided manufacture of the object. 19 figs.

  4. Ultrastructural features of degenerated cardiac muscle cells in patients with cardiac hypertrophy.

    PubMed Central

    Maron, B. J.; Ferrans, V. J.; Roberts, W. C.

    1975-01-01

    Degenerated cardiac muscle cells were present in hypertrophied ventricular muscle obtained at operation from 12 (38%) of 32 patients with asymmetric septal hypertrophy (hypertrophic cardiomyopathy) or aortic valvular disease. Degenerated cells demonstrated a wide variety of ultrastructural alterations. Mildly altered cells were normal-sized or hypertrophied and showed focal changes, including preferential loss of thick (myosin) filaments, streaming and clumping of Z band material, and proliferation of the tubules of sarcoplasmic reticulum. Moderately and severely degenerated cells were normal-sized or atrophic and showed additional changes, including extensive myofibrillar lysis and loss of T tubules. The appearance of the most severely degenerated cells usually reflected the cytoplasmic organelle (sarcoplasmic reticulum, glycogen, or mitochondria) which underwent proliferation and filled the myofibril-free areas of these cells. Moderately and severely degenerated cells were present in areas of fibrosis, had thickened basement membranes, and had lost their intercellular connections. These observations suggest that degenerated cardiac muscle cells have poor contractile function and may be responsible for impaired cardiac performance in some patients with chronic ventricular hypertrophy. Images Fig 1 Fig 2 Fig 3 Figs 4-6 Figs 7-8 Fig 9 Fig 10 Fig 11 Figs 12-15 Fig 16 Fig 17 Figs 18-21 Figs 22-23 Fig 24 Fig 25 Fig 26 Fig 27 Figs 28-29 Fig 30 Figs 31-32 Fig 33 PMID:124533

  5. The comparative uptake and interaction of several radionuclides in the trophic levels surrounding the Los Alamos Meson Physics Facility (LAMPF) waste water ponds

    SciTech Connect

    Brooks, G.H. Jr.

    1989-08-01

    A study was undertaken to examine the uptake, distribution, and interaction of five activation products (Co-57, Be-7, Cs-134, Rb-83, and Mn-54) within the biotic and abiotic components surrounding the waste treatment lagoons of the Los Alamos Meson Physics Facility (LAMPF). The study attempted to ascertain where, and what specific interactions were taking place among the isotopes and the biotic/abiotic components. A statistical approach, utilizing Multivariate Analysis of Variance (MANOVA), was conducted testing the radioisotopic concentrations by (1) the trophic levels (TROPLVL) in each position sampled on the grid, (2) where sampled on the grid (TRAN), (3) where sampled with-in each grid line (PLOT), and (4) the side with which sampled (SIDE). This provided both the dependent and independent variables that would be tested. The Null Hypothesis (Ho) tested the difference in the mean values of the isotopes within/between each of the four independent variables. The Rb-83 statistic indicated an accumulation within the TRAN and PLOT variables within the sampled area. The Co-57 test statistic provided a value which indicated that accumulation of this isotope within TROPLVL was taking place. Mn-54 test values indicated that accumulation was also taking place at the higher trophic levels within the PLOT, TRAN, and SIDE positions. Cs-134 was found to accumulate to third level in this trophic level structure (TROPLVL-(vegetation)), and then decrease from there. The Be-7 component provided no variance from known compartmental transfers. 210 refs., 17 figs., 4 tabs.

  6. Hungry water: Effects of dams and gravel mining on river channels

    SciTech Connect

    Kondolf, G.M.

    1997-07-01

    Rivers transport sediment from eroding uplands to depositional areas near sea level. If the continuity of sediment transport is interrupted by dams or removal of sediment from the channel by gravel mining, the flow may become sediment-starved (hungry water) and prone to erode the channel bed and banks, producing channel incision (downcutting), coarsening of bed material, and loss of spawning gravels for salmon and trout (as smaller gravels are transported without replacement from upstream), Gravel is artificially added to the River Rhine to prevent further incision and to many other rivers in attempts to restore spawning habitat. It is possible to pass incoming sediment through some small reservoirs, thereby maintaining the continuity of sediment transport through the system. Damming and mining have reduced sediment delivery from rivers to many coastal areas, leading to accelerated beach erosion. Sand and gravel are mined for construction aggregate from river channel and floodplains. In-channel mining commonly causes incision, which may propagate up- and downstream of the mine, undermining bridges, inducing channel instability, and lowering alluvial water tables. Floodplain gravel pits have the potential to become wildlife habitat upon reclamation, but may be captured by the active channel and thereby become instream pits. Management of sand and gravel in rivers must be done on a regional basis, restoring the continuity of sediment transport where possible and encouraging alternatives to river-derived aggregate sources. 80 refs., 17 figs.

  7. Surface organometallic chemistry: Reaction of tris-allyl rhodium with surfaces of silica, alumina, titania, and magnesia

    SciTech Connect

    Dufour, P.; Houtman, C.; Santini, C.C.

    1992-05-20

    The reaction of Rh({eta}{sup 3}-C{sub 3}H{sub 5}){sub 3}, 1, with silica, alumina, titania, and magnesia has been followed by infrared spectroscopy, isotopic labeling experiments, quantitative analysis of gaseous products, and elemental analysis. Complex 1 reacts rapidly with alumina pretreated to 350{degrees}C and with silica and titania to form a bis-allylic rhodium species grafted to the surface, but no immediate reaction was observed between 1 and alumina pretreated to 200 {degrees}C or magnesia. This reaction likely proceeds via electrophilic cleavage of Rh-C bonds of 1 by a surface OH group. On silica, the results of IR experiments after labeling the surface with {sup 16}O-D and {sup 18}O-H and structural arguments suggest that two 18-electron species are possible on the surface: one for which the rhodium is coordinated both to an oxygen and a hydroxyl group linked to the same silicon atom and another for which the oxygen atom and the OH group are linked to two different silicon atoms. Molecular mechanics modeling of silica, alumina, and titania was used as a complement to the experimental work to test the plausibility of various modes of attachment of the rhodium allyl complex. 40 refs., 17 figs., 4 tabs.

  8. Retention indices, relative response factors, and mass spectra of trifluoroethyl and heptafluorobutyl esters of carboxylic acids determined by capillary GC/MS

    SciTech Connect

    Yu, S.K.-T.; Vrana, R.P.; Green, J.B.

    1990-11-01

    The GC/MS characteristics of carboxylic acid esters prepared from fluorine-containing alcohols were compared to those of methyl esters. The GC retention of 2,2,2-trifluoroethyl (TFE) esters was less than, and 2,2,3,3,4,4,4-heptafluoro-1-butyl (HFB) esters approximately equivalent to that of methyl esters. The peak shape of both TFE and HFB esters was slightly superior to that of methyl esters. Mass spectra of TFE and HFB aliphatic esters show significantly more intense molecular and key fragment ions than those of methyl esters. Also, owing to their significantly higher molecular weights, TFE or HFB ester molecular ions and most fragment ions of interest occur at significantly higher m/z values than most potential interfering ions. The GC retention indices, relative GC/MS total ion current response factors, and 70 eV electron impact mass spectra of about 70 TFE and 70 HFB carboxylic acid esters are reported. Results from analysis of a TFE/HFB esterified petroleum carboxylic acid concentrate are discussed in detail. 26 refs., 17 figs., 3 tabs.

  9. Synaptic transmission in the superior cervical ganglion of the cat after reinnervation by vagus fibres

    PubMed Central

    Ceccarelli, B.; Clementi, F.; Mantegazza, P.

    1971-01-01

    1. A vagus-sympathetic anastomosis was performed in the cat by connecting end to end the cranial trunk of the vagus to the cranial end of the cervical sympathetic trunk, both severed under the ganglia. 2. Forty to sixty days after the anastomosis, the ocular signs of sympathetic paralysis (such as myosis and prolapse of the nictitating membrane) which had developed shortly after the operation, had completely disappeared, thus suggesting the recovery of synaptic transmission in the ganglion. In case of plain preganglionic denervation after the same period the ocular signs of cervical sympathetic paralysis were still present. 3. Contraction of the nictitating membrane could be induced by electrical stimulation of both the vagus preanastomotic and the sympathetic postanastomotic—preganglionic trunks. Ganglionic blocking agents induced the blockade of the `new' ganglionic synaptic function, while nicotine and pilocarpine provoked a marked contraction of the nictitating membrane. 4. Electron microscopy showed that the preganglionic regeneration of vagus fibers resulted in the formation of new synapses, mainly of axodendritic type, identical to normal ganglionic synapses. Moreover, after cutting the preanastomotic trunk of the vagus, these new ganglionic presynaptic profiles degenerated, thus proving their vagal origin. 5. During restoration of the synaptic contacts readjustment of dendritic tips occurred. ImagesText-fig. 2Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 16Fig. 17Fig. 14Fig. 15Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 7Fig. 8 PMID:4326851

  10. Evaluation of dust-related health hazards associated with air coring at G-Tunnel, Nevada Test Site

    SciTech Connect

    Skaggs, B.J.; Ortiz, L.W.; Burton, D.J.; Isom, B.L.; Vigil, E.A.

    1991-03-01

    The Yucca Mountain Project was established to evaluate the potential for storing high-level radioactive wastes in geologic formations. Hydrologists recommended that drilling or coring in support of characterization tests be performed dry. Dry drilling, or air coring, presents a concern about health protection for the drilling personnel. The rock generally has a high silica content, and natural zeolites are abundant. Some zeolites are fibrous, leading to concerns that inhalation may result in asbestos-like lung diseases. An industrial hygiene study (IH) was conducted as part of an air coring technical feasibility test. The IH study found the potential for exposures to airborne silica and nuisance dusts to be within regulatory requirements and determined the commercial dust control equipment monitored to be effective when used in conjunction with a good area ventilation system and sound IH practices. Fibrous zeolites were not detected. Recommendations for the Yucca Mountain studies are (1) dust collection and control equipment equivalent or superior to that monitored must be used for any dry drilling activity and must be used with good general dilution ventilation and local exhaust ventilation provided on major emission sources; (2) good industrial hygiene work practices must be implemented, including monitoring any area where zeolitic fibers are suspect; and (3) a study should be conducted to determine the biological effects of the fibrous zeolite, mordenite. 25 refs., 17 figs., 14 tabs.

  11. GENII: The Hanford Environmental Radiation Dosimetry Software System: Volume 2, Users' manual: Hanford Environmental Dosimetry Upgrade Project

    SciTech Connect

    Napier, B.A.; Peloquin, R.A.; Strenge, D.L.; Ramsdell, J.V.

    1988-11-01

    The Hanford Environmental Dosimetry Upgrade Project was undertaken to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) in updated versions of the environmental pathway analysis models used at Hanford. The resulting second generation of Hanford environmental dosimetry computer codes is compiled in the Hanford Environmental Dosimetry System (Generation II, or GENII). The purpose of this coupled system of computer codes is to analyze environmental contamination of, air, water, or soil. This is accomplished by calculating radiation doses to individuals or populations. GENII is described in three volumes of documentation. This second volume is a Users' Manual, providing code structure, users' instructions, required system configurations, and QA-related topics. The first volume describes the theoretical considerations of the system. The third volume is a Code Maintenance Manual for the user who requires knowledge of code detail. It includes logic diagrams, global dictionary, worksheets, example hand calculations, and listings of the code and its associated data libraries. 27 refs., 17 figs., 23 tabs.

  12. A new technology for producing hydrogen and adjustable ratio syngas from coke oven gas

    SciTech Connect

    Jun Shen; Zhi-zhong Wang; Huai-wang Yang; Run-sheng Yao

    2007-12-15

    About 15 billion Nm{sup 3} coke oven gas (COG) is emitted into the air in Shanxi Province in China as air pollutants. It is also a waste of precious chemical resources. In this study, COG was purified respectively by four methods including refrigeration, fiberglass, silica gel, and molecular sieve. Purified COG was separated by a prism membrane into two gas products. One consists mainly of H{sub 2} ({gt}90 vol %) and the other is rich in CH{sub 4} ({gt}60 vol %) with their exact compositions to vary with the membrane separation pressure and outlet gas flow ratio. The gas rich in CH{sub 4} was partially oxidized with oxygen in a high-temperature fixed-bed quartz reactor charged with coke particles of 10 mm size. At 1200-1300{sup o}C, a CH{sub 4} conversion of {gt}99% could be obtained. The H{sub 2}/CO ratio in the synthesis product gas can be adjusted in the range 0.3-1.4, very favorable for further C1 synthesis. 10 refs., 17 figs., 1t ab.

  13. Sintering behavior of doped ZnO powders for high field varistors

    SciTech Connect

    Ghirlanda, M.

    1990-08-01

    The sintering of ZnO varistor precursor powders, doped with Co, Mn and different concentrations of Bi and Al, is investigated and discussed in relation with sintering models. One purpose of the present study is to provide information valuable for the fabrication of high field varistors. As the fundamental parameter of these electronic components is the breakdown voltage per unit of thickness, which is determined by the number of grain boundaries per linear dimension, the grain size and the sintered density are crucial variables, and the sintering is a central step in the manufacturing of such varistors. Sintering experiments performed at constant heating rate in a loading dilatometer provide data on the densification and creep of the compacted powders. Another goal of the present study is to provide an experimental basis for the interpretation of the evolution of the ratio between densification rate and creep rate in terms of competition between densification and microstructure coarsening. This is accomplished by taking advantage of the variety of sintering behaviors that takes place in the system ZnO-Bi-Al: the comparison of these behaviors allows us to correlate the macroscopic sintering parameters to the evolution of the microstructure. It results that, while in non-doped powders densification and coarsening develop in a balanced way, resulting in the constancy of the ratio between densification rate and creep rate, the effect of the dopants on the sintering kinetics alters such a balance, leading this ratio to vary. 17 figs.

  14. Stress corrosion cracking of alloy 600 using the constant strain rate test

    SciTech Connect

    Bulischeck, T. S.; van Rooyen, D.

    1980-01-01

    The most recent corrosion problems experienced in nuclear steam generators tubed with Inconel alloy 600 is a phenomenon labeled ''denting''. Denting has been found in various degrees of severity in many operating pressurized water reactors. Laboratory investigations have shown that Inconel 600 exhibits intergranular SCC when subjected to high stresses and exposed to deoxygenated water at elevated temperatures. A research project was initiated at Brookhaven National Laboratory in an attempt to improve the qualitative and quantitative understanding of factors influencing SCC in high temperature service-related environments. An effort is also being made to develop an accelerated test method which could be used to predict the service life of tubes which have been deformed or are actively denting. Several heats of commercial Inconel 600 tubing were procured for testing in deaerated pure and primary water at temperatures from 290 to 365/sup 0/C. U-bend type specimens were used to determine crack initiation times which may be expected for tubes where denting has occurred but is arrested and provide baseline data for judging the accelerating effects of the slow strain rate method. Constant extension rate tests were employed to determine the crack velocities experienced in the crack propagation stage and predict failure times of tubes which are actively denting. 8 refs., 17 figs., 5 tabs.

  15. Gamma ray emission from spheres pulsed with D-T neutrons: Results of May 1987 experiments at RTNS-1

    SciTech Connect

    Goldberg, E.; Hansen, L.F.; Howerton, R.J.; Komoto, T.T.; Pohl, B.A.

    1987-11-01

    Subsequent to the analysis of the June 1986 series of experiments at RTNS-1, we thought it sensible to repeat some of the experiments with greater care given to the high energy portions of the effluent gamma ray spectra. In addition, some new materials were recommended for study, such as silicon. And since among our earlier experiments we observed data which was not highly reproducible, repeated runs would provide a quantitative assessment of the precision of the experiments. Accordingly, we followed the procedure outlined in UCID-20884. First, we calibrated the NE-213 detector with standard gamma ray sources and checked for linearity of pulse height with energy deposited by electrons. We then conducted experiments at RTNS-1, using spherical configurations of C, Si, Al, H/sub 2/O, N/sub 2/,Ti, Fe, and C/sub 2/F/sub 4/. The H/sub 2/O was contained in a modified glass flask, while the liquid nitrogen was held in a double-walled steel dewar. 25 refs., 17 figs., 9 tabs.

  16. RF driven sulfur lamp having driving electrodes which face each other

    DOEpatents

    Gabor, G.; Orr, T.R.; Greene, C.M.; Crawford, D.G.; Berman, S.M.

    1999-06-22

    A high intensity discharge lamp without mercury is disclosed radiating a selected spectrum of which can be almost entirely in the visible range from an envelope that contains a sulfur containing substance. The lamp utilizes a signal source that generates an excitation signal that is externally coupled to the exterior surface of the envelope to excite the enclosed sulfur containing substance. Various embodiments of the lamp use electrodes adjacent the envelope to couple the excitation signal thereto with the face of the electrodes shaped to complement the shape of the exterior surface of the envelope. Two shapes discussed are spherical and cylindrical. To minimize filamentary discharges each envelope may include an elongated stem affixed to the exterior thereof whereby a rotational subsystem spins the envelope. In yet another embodiment the envelope has a Dewar configuration with two electrodes, one positioned near the external curved side surface of the body, and a second to the inner surface of the hole through the envelope. Further, the envelope may contain a backfill of a selected inert gas to assist in the excitation of lamp with that backfill at a pressure of less than 1 atmosphere, wherein the backfill pressure is directly related to the increase or decrease of peak output and inversely related to the increase and decrease of the emitted spectrum from the envelope. The emitting fill can be less than 6 mg/cc, or at least 2 mg/cc of the envelope of a sulfur containing substance. 17 figs.

  17. RF driven sulfur lamp having driving electrodes arranged to cool the lamp

    DOEpatents

    Gabor, G.; Orr, T.R.; Greene, C.M.; Crawford, D.G.; Berman, S.M.

    1998-10-20

    A high intensity discharge lamp without mercury is disclosed radiating a selected spectrum of which can be almost entirely in the visible range from an envelope that contains a sulfur containing substance. The lamp utilizes a signal source that generates an excitation signal that is externally coupled to the exterior surface of the envelope to excite the enclosed sulfur containing substance. Various embodiments of the lamp use electrodes adjacent the envelope to couple the excitation signal thereto with the face of the electrodes shaped to complement the shape of the exterior surface of the envelope. Two shapes discussed are spherical and cylindrical. To minimize filamentary discharges each envelope may include an elongated stem affixed to the exterior thereof whereby a rotational subsystem spins the envelope. In yet another embodiment the envelope has a Dewar configuration with two electrodes, one positioned near the external curved side surface of the body, and a second to the inner surface of the hole through the envelope. Further, the envelope may contain a backfill of a selected inert gas to assist in the excitation of lamp with that backfill at a pressure of less than 1 atmosphere, wherein the backfill pressure is directly related to the increase or decrease of peak output and inversely related to the increase and decrease of the emitted spectrum from the envelope. The emitting fill can be less than 6 mg/cc, or at least 2 mg/cc of the envelope of a sulfur containing substance. 17 figs.

  18. Direct conversion of methane to C sub 2 's and liquid fuels

    SciTech Connect

    Warren, B.K.; Campbell, K.D.

    1989-11-22

    Objectives of the project are to discover and evaluate novel catalytic systems for the conversion of methane or by-product light hydrocarbon gases either indirectly (through intermediate light gases rich in C{sub 2}'s) or directly to liquid hydrocarbon fuels, and to evaluate, from an engineering perspective, different conceptualized schemes. The approach is to carry out catalyst testing on several specific classes of potential catalysts for the conversion of methane selectively to C{sub 2} products. Promoted metal oxide catalysts were tested. Several of these exhibited similar high ethylene to ethane ratios and low carbon dioxide to carbon monoxide ratios observed for the NaCl/{alpha}-alumina catalyst system reported earlier. Research on catalysts containing potentially activated metals began with testing of metal molecular sieves. Silver catalysts were shown to be promising as low temperature catalysts. Perovskites were tested as potential methane coupling catalysts. A layered perovskite (K{sub 2}La{sub 2}Ti{sub 3}O{sub 10}) gave the highest C{sub 2} yield. Work continued on the economic evaluation of a hypothetical process converting methane to ethylene. An engineering model of the methane coupling system has been prepared. 47 refs., 17 figs., 57 tabs.

  19. Environmental Survey preliminary report, Princeton Plasma Physics Laboratory, Princeton, New Jersey

    SciTech Connect

    Not Available

    1989-05-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Princeton Plasma Physics Laboratory (PPPL), conducted June 13 through 17, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Team members are being provided by private contractors. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PPPL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PPPL, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environment problems identified during its on-site activities. The S A plan is being developed by the Idaho National Engineering Laboratory. When completed, the S A results will be incorporated into the PPPL Survey findings for inclusion in the Environmental Survey Summary Report. 70 refs., 17 figs., 21 tabs.

  20. MESOILT2, a Lagrangian trajectory climatological dispersion model

    SciTech Connect

    Ramsdell, J.V. Jr.; Burk, K.W.

    1991-03-01

    The objective of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate the radiation dose that individuals could have received as a result of emissions from nuclear operations at the Hanford Site. An independent Technical Steering Panel (TSP) directs the project, which is conducted by the Pacific Northwest Laboratory (PNL). The TSP directed PNL to demonstrate that its recommended approach for dose reconstruction is technically feasible and practical. This demonstration was Phase 1 of the project. This report is specifically concerned with the approach that PNL recommends for dealing with the atmospheric pathway. The TSP established a model domain for the atmospheric pathway for Phase 1 that includes 10 counties in Washington and Oregon and covers several thousand square miles. It is unrealistic to assume that atmospheric models which estimate transport and diffusion based on the meteorological conditions near the point of release of material at the time of release are adequate for a region this large. As a result, PNL recommended use of a Lagrangian trajectory, puff dispersion model for the Phase I study. This report describes the MESOILT2 computer code and the atmospheric transport, diffusion, deposition, and depletion models used in Phase I. The contents of the report include a technical description of the models, a user's guide for the codes, and descriptions of the individual code elements. 53 refs., 17 figs., 5 tabs.

  1. Preliminary report on fluid inclusions from halites in the Castile and lower Salado formations of the Delaware Basin, southeastern New Mexico. [Freezing-point depression

    SciTech Connect

    Stein, C.L.

    1985-09-01

    A suite of samples composed primarily of halite from the upper Castile and lower Salado Formations of the Permian Basin was selected from Waste Isolation Pilot Plant (WIPP) core for a reconnaissance study of fluid inclusions. Volume percent of these trapped fluids averaged 0.7% to 1%. Freezing-point depressions varied widely and appeared to be unrelated to fluid-inclusion type, to sedimentary facies, or to stratigraphic depth. However, because very low freezing points were usually associated with anhydrite, a relation may exist between freezing-point data and lithology. Dissolved sulfate values were constant through the Castile, then decreased markedly with lesser depth in the lower Salado. This trend correlates very well with observed mineralogy and is consistent with an interpretation of the occurrence of secondary polyhalite as a result of gypsum or anhydrite alteration with simultaneous consumption of dissolved sulfate from the coexisting fluids. Together with the abundance and distribution of fluid inclusions in primary or ''hopper'' crystal structures, this evidence suggests that inclusions seen in these halites did not migrate any significant geographical distance since their formation. 28 refs., 17 figs., 2 tabs.

  2. Gas stream cleanup

    SciTech Connect

    Bossart, S.J.; Cicero, D.C.; Zeh, C.M.; Bedick, R.C.

    1990-08-01

    This report describes the current status and recent accomplishments of gas stream cleanup (GSCU) projects sponsored by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The primary goal of the Gas Stream Cleanup Program is to develop contaminant control strategies that meet environmental regulations and protect equipment in advanced coal conversion systems. Contaminant control systems are being developed for integration into seven advanced coal conversion processes: Pressurized fludized-bed combustion (PFBC), Direct coal-fueled turbine (DCFT), Intergrated gasification combined-cycle (IGCC), Gasification/molten carbonate fuel cell (MCFC), Gasification/solid oxide fuel cell (SOFC), Coal-fueled diesel (CFD), and Mild gasification (MG). These advanced coal conversion systems present a significant challenge for development of contaminant control systems because they generate multi-contaminant gas streams at high-pressures and high temperatures. Each of the seven advanced coal conversion systems incorporates distinct contaminant control strategies because each has different contaminant tolerance limits and operating conditions. 59 refs., 17 figs., 5 tabs.

  3. Linear-quadratic-regulator pointing control system design for a high-altitude balloon payload

    SciTech Connect

    White, J.E.; Etter, J.R.

    1987-11-01

    A pointing control system design for the science package of a NASA high-altitude research balloon is described. The balloon assembly consists of a single helium balloon connected to a payload recovery parachute, payload gondola, and ballast hopper. Pointing of the scientific payload is accomplished via an arrangement of drive motors and a flywheel. Linear quadratic regulator (LQR) synthesis techniques are employed to produce the azimuth and elevation controller designs. The use of LQR synthesis is motivated by the azimuthal dynamic coupling encountered between the balloon and gondola. Two control devices are employed in azimuth, one of which is a decoupler motor and the other a flywheel. The decoupler motor is intended to isolate the gondola from the balloon such that the flywheel can be accelerated or decelerated about a steady-state angular velocity to provide precise azimuthal pointing. The multiple-input/multiple-output nature of the azimuth pointing problem is best handled in a matrix synthesis procedure such as LQR. The controller design methodology is explained, and a combination of time responses and singular value analyses are used to analytically evaluate the performance of the control system. 11 refs., 17 figs.

  4. Investigation of flow regimes affecting the Mexico city region

    SciTech Connect

    Bossert, J.E.

    1997-02-01

    The Regional Atmospheric Modeling System (RAMS) in used to investigate the detailed mesoscale flow structure over the Mexico City region for a 3-day period in February 1991. The model simulation is compared with rawinsonde and tethersonde profile data and measurements from two surface stations in the southwestern part of Mexico City. The model results show that show that downward momentum transfer from aloft increases southerly winds near the surface on the first case day, effectively sweeping pollution from the basin surrounding Mexico City. Thermally driven circulations within the basin, in adjacent valleys, and over the slope of the Mexican Plateau strongly influence winds within the Mexico City basin on the second case day. These wind systems produce a complex interaction of flows, culminating in the propagation of a 1-km-deep density current circulation through Mexico City that displaces the polluted basin air mass aloft. Regional northeasterly flows develop early in the morning of the third case day and force the polluted basin air mass toward the southwestern portion of the basin where observed ozone concentrations are highest. The results show that both regional- and synoptic-scale flows influence the meteorology within the Mexico City basin over the 3-day period. The simulated circulation also provide a physical basis for understanding the high spatial and temporal variability of ozone concentrations observed over the city. 27 refs., 17 figs.

  5. A morphological study of experimental rabbit staphylococcal endocarditis and aortitis. I. Formation and effect of infected and uninfected vegetations on the aorta.

    PubMed Central

    Ferguson, D. J.; McColm, A. A.; Savage, T. J.; Ryan, D. M.; Acred, P.

    1986-01-01

    In this study the development of sterile thrombic vegetations on the aorta resulting from catheterization and the effect of subsequent infection with Staphylococcus aureus were examined by light and electron microscopy. Thrombi of various sizes, comprising fibrin, platelets and a few leucocytes and erythrocytes, develop on the damaged surface of the aorta with minimal changes in the underlying aortic wall. After intravenous inoculation of Staph. aureus most vegetations become infected, as shown by the presence of bacterial colonies, and the underlying aortic wall is markedly inflamed. The inflammatory cells invade the wall from the base of the aorta and cause swelling plus disruption of the elastic laminae with ulceration of the luminal surface in some cases. This structural damage appears to be a direct result of the bacterial infection of the lesions on the luminal surface. Images Fig. 15 Fig. 16 Fig. 17 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 PMID:3790427

  6. Broadband measurements of electron cyclotron emission in TFTR (Tokamak Fusion Test Reactor) using a quasi-optical light collection system and a polarizing Michelson interferometer

    SciTech Connect

    Stauffer, F.J.; Boyd, D.A.; Cutler, R.C.; Diesso, M.; McCarthy, M.P.; Montague, J.; Rocco, R.

    1988-04-01

    For the past three years, a Fourier transform spectrometer diagnostic system, employing a fast-scanning polarizing Michelson interferometer, has been operating on the TFTR tokamak at Princeton Plasma Physics Laboratory. It is used to measure the electron cyclotron emission spectrum over the range 2.5 to 18 cm/sup /minus/1/ (75-540 GHz) with a resolution of 0.123 cm/sup /minus/1/(3.7 GHz), at a rate of 72 spectra per second. The quasi-optical system for collecting the light and transporting it through the interferometer to the detector has been designed using the concepts of both Gaussian and geometrical optics in order to produce a system that is efficient over the entire spectral range. The commerical Michelson interferometer was custom-made for this project and is at the state of the art for this type of specialized instrument. Various pre-installation and post-installation tests of the optical system and the interferometer were performed and are reported here. An error propagation analysis of the absolute calibration process is given. Examples of electron cyclotron emission spectra measured in two polarization directions are given, and electron temperature profiles derived from each of them are compared. 34 refs., 17 figs.

  7. Method and apparatus for capacitive deionization, electrochemical purification, and regeneration of electrodes

    DOEpatents

    Farmer, J.

    1995-06-20

    An electrochemical cell for capacitive deionization and electrochemical purification and regeneration of electrodes includes two oppositely disposed, spaced-apart end plates, one at each end of the cell. Two generally identical single-sided end electrodes, are arranged one at each end of the cell, adjacent to the end plates. An insulator layer is interposed between each end plate and the adjacent end electrode. Each end electrode includes a single sheet of conductive material having a high specific surface area and sorption capacity. In the preferred embodiment, the sheet of conductive material is formed of carbon aerogel composite. The cell further includes a plurality of generally identical double-sided intermediate electrodes that are equidistantly separated from each other, between the two end electrodes. As the electrolyte enters the cell, it flows through a continuous open serpentine channel defined by the electrodes, substantially parallel to the surfaces of the electrodes. By polarizing the cell, ions are removed from the electrolyte and are held in the electric double layers formed at the carbon aerogel surfaces of the electrodes. As the cell is saturated with the removed ions, the cell is regenerated electrically, thus significantly minimizing secondary wastes. 17 figs.

  8. Quantitative analysis of the hydrothermal system in Lassen Volcanic National Park and Lassen Known Geothermal Resource Area

    SciTech Connect

    Sorey, M.L.; Ingebritsen, S.E.

    1984-01-01

    The Lassen hydrothermal system is in the southern Cascade Range, approximately 70 kilometers east-southeast of Redding, California. The conceptual model of the Lassen system is termed a liquid-dominated hydrothermal system with a parasitic vapor-dominated zone. The essential feature of this model is that steam and steam-heated discharge at relatively high elevations in Lassen Volcanic National Park (LVNP) and liquid discharge with high chloride concentrations at relatively low elevations outside LVNP in the Lassen Known Geothermal Resource Area (KGRA) are both fed by an upflow of high-enthalpy, two-phase fluid within the Park. Liquid flows laterally away from the upflow area towards the areas of high-chloride discharge, and steam rises through a vapor-dominated zone to feed the steam and steam-heated features. The geometric model corresponds to an areally restricted flow regime that connects the Bumpass Hell area in LVNP with regions of chloride hot springs in the Mill Creek canyon in the KGRA south of LVNP. Simulations of thermal fluid withdrawal in the Mill Creek Canyon were carried out in order to determine the effects of such withdrawal on portions of the hydrothermal system within the Park. 19 refs., 17 figs., 4 tabs.

  9. Survey of Magnetic Fields Near BPA 230-kV and 500-kV Transmission Lines.

    SciTech Connect

    Perrin, Nancy; Aggarwal, Rajinder Pal; Bracken, T. Daniel

    1991-05-20

    The purpose of this study was to characterize typical levels and variability of 60Hz magnetic fields at the centerline and edge of right-of-way of Bonneville Power Administration (BPA) 230-kV and 500-kV transmission lines. This was accomplished by taking magnetic field measurements at over 800 spans in Oregon and Washington. The spans were sampled using a stratified random sampling procedure with region (East vs. West), voltage (230-kV vs 500-kV), and circuit configuration as strata. There were five different circuit configuration groups for each region/voltage category requiring a total of 200 strata. Magnetic field measurements were taken at 13 locations under each span using an EMDEX-C as a survey meter. Additional information recorded for each span included conductor height (at 10 locations), right-of-way width, longitudinal and lateral slope, time of day, vegetation, terrain, weather conditions, temperature, wind speed, span length and presence of other lines in the corridor. 9 refs., 17 figs., 26 tabs.

  10. MORSE/STORM: A generalized albedo option for Monte Carlo calculations

    SciTech Connect

    Gomes, I.C.; Stevens, P.N. )

    1991-09-01

    The advisability of using the albedo procedure for the Monte Carlo solution of deep penetration shielding problems that have ducts and other penetrations has been investigated. The use of albedo data can dramatically improve the computational efficiency of certain Monte Carlo calculations. However, the accuracy of these results may be unacceptable because of lost information during the albedo event and serious errors in the available differential albedo data. This study was done to evaluate and appropriately modify the MORSE/BREESE package, to develop new methods for generating the required albedo data, and to extend the adjoint capability to the albedo-modified calculations. Major modifications to MORSE/BREESE include an option to save for further use information that would be lost at the albedo event, an option to displace the point of emergence during an albedo event, and an option to use spatially dependent albedo data for both forward and adjoint calculations, which includes the point of emergence as a new random variable to be selected during an albedo event. The theoretical basis for using TORT-generated forward albedo information to produce adjuncton albedos was derived. The MORSE/STORM package was developed to perform both forward and adjoint modes of analysis using spatially dependent albedo data. Results obtained with MORSE/STORM for both forward and adjoint modes were compared with benchmark solutions. Excellent agreement and improved computational efficiency were achieved, demonstrating the full utilization of the albedo option in the MORSE code. 7 refs., 17 figs., 15 tabs.

  11. Determination of ecologically vital groundwaters at selected sites in the Formerly Utilized Sites Remedial Action Program

    SciTech Connect

    Vinikour, W.S.; Yin, S.C.L.

    1989-08-01

    The US Department of Energy is classifying groundwaters at sites in its Formerly Utilized Sites Remedial Action Program (FUSRAP). Of particular concern is the potential presence of groundwaters that are highly vulnerable to contamination and that are either (1) irreplaceable sources of drinking water or (2) ecologically vital. Conditions at nine FUSRAP sites were evaluated to determine if ecologically vital groundwaters are present. The sites evaluated were Wayne Interim Storage Site, Maywood Interim Storage Site, and Middlesex Sampling Plant in New Jersey; Ashland 2 Site, Seaway Industrial Park, Colonie Interim storage Site, and Niagara Falls Storage Site in New York; and the St. Louis Airport Site and Hazelwood Interim Storage Site in Missouri. The analyses indicated that groundwaters are vulnerable to contamination at all but two of the sites -- the Ashland 2 and Seaway Industrial Park sites in New York. Groundwater discharge points were identified within a 2-mile radius (i.e., the classification review area) of all of the sites. No ecologically vital groundwater areas exist in the vicinities of any of the nine FUSRAP sites evaluated. 35 refs., 17 figs.

  12. Compositions for chromosome-specific staining

    SciTech Connect

    Gray, J.W.; Pinkel, D.

    1998-05-26

    Methods and compositions for staining based upon nucleic acid sequence that employ nucleic acid probes are provided. The methods produce staining patterns that can be tailored for specific cytogenetic analyses. The probes are appropriate for in situ hybridization and stain both interphase and metaphase chromosomal material with reliable signals. The nucleic acid probes are typically of a complexity greater than 50 kb, the complexity depending upon the cytogenetic application. Methods are provided to disable the hybridization capacity of shared, high copy repetitive sequences and/or remove such sequences to provide for useful contrast. Still further methods are provided to produce chromosome-specific staining reagents which are made specific to the targeted chromosomal material, which can be one or more whole chromosomes, one or more regions on one or more chromosomes, subsets of chromosomes and/or the entire genome. Probes and test kits are provided for use in tumor cytogenetics, in the detection of disease related loci, in analysis of structural abnormalities, such as translocations, and for biological dosimetry. Methods and prenatal test kits are provided to stain targeted chromosomal material of fetal cells, including fetal cells obtained from maternal blood. The invention provides for automated means to detect and analyze chromosomal abnormalities. 17 figs.

  13. Flue gas desulfurization (FGD) chemistry and analytical methods handbook

    SciTech Connect

    Noblett, J.G.; Burke, J.M.

    1990-08-01

    The purpose of this handbook is to provide a comprehensive guide to sampling, analytical, and physical test methods essential to the operation, maintenance, and understanding of flue gas desulfurization (FGD) system chemistry. EPRI sponsored the first edition of this three-volume report in response to the needs of electric utility personnel responsible for establishing and operating commercial FGD analytical laboratories. The second, revised editions of Volumes 1 and 2 were prompted by the results of research into various non-standard aspects of FGD system chemistry. Volume 1 of the handbook explains FGD system chemistry in the detail necessary to understand how the processes operate and how process performance indicators can be used to optimize system operation. Volume 2 includes 63 physical-testing and chemical-analysis methods for reagents, slurries, and solids, and information on the applicability of individual methods to specific FGD systems. Volume 3 contains instructions for FGD solution chemistry computer program designated by EPRI as FGDLIQEQ. Executable on IBM-compatible personal computers, this program calculates the concentrations (activities) of chemical species (ions) in scrubber liquor and can calculate driving forces for important chemical reactions such as S0{sub 2} absorption and calcium sulfite and sulfate precipitation. This program and selected chemical analyses will help an FGD system operator optimize system performance, prevent many potential process problems, and define solutions to existing problems. 22 refs., 17 figs., 28 tabs.

  14. Integrated environmental control: Volume 1, Sample design strategy: Final report

    SciTech Connect

    Nold, D.G.; Baus, T.R.; Robie, C.P.

    1987-07-01

    The Volume 1 report for this study proposes an integrated design approach for coal-fired power plant environmental controls. Two characteristics distinguish the integrated environmental control (IEC) approach as defined in this study from historical design approaches. First, all major environmental control subsystems are considered to equally influence costs and overall plant performance until preliminary analysis indicates otherwise. This assures benefits derived for one subsystem (e.g., solid waste disposal) do not increase complexity for other subsystems (e.g., water management) to the level where total plant costs are higher. Second, the IEC approach maximizes compatibility between equipment, fuel properties, and site characteristics. This allows the least complex environmental control system (ECS), lowering cost and minimizing potential operating problems. The IEC design strategy, described in detail in Section 2 and Appendices A-D, can reduce ECS costs in two ways. First, the IEC approach helps insure cost savings derived for one subsystem are not offset by other increases, raising total ECS costs. Second, reliability can be increased and potential operating problems reduced if equipment and control strategies selected are most compatible with the site and fuel characteristics, and thus most simple. Selection of the best control strategy for given site and fuel characteristics is aided by a technical/economic analysis, described in Section 3, that allows ECS costs and technical features to be analyzed. 17 figs., 14 tabs.

  15. High speed transient sampler

    DOEpatents

    McEwan, T.E.

    1995-11-28

    A high speed sampler comprises a meandered sample transmission line for transmitting an input signal, a straight strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates along the transmission lines. The sampling gates comprise a four terminal diode bridge having a first strobe resistor connected from a first terminal of the bridge to the positive strobe line, a second strobe resistor coupled from the third terminal of the bridge to the negative strobe line, a tap connected to the second terminal of the bridge and to the sample transmission line, and a sample holding capacitor connected to the fourth terminal of the bridge. The resistance of the first and second strobe resistors is much higher than the signal transmission line impedance in the preferred system. This results in a sampling gate which applies a very small load on the sample transmission line and on the strobe generator. The sample holding capacitor is implemented using a smaller capacitor and a larger capacitor isolated from the smaller capacitor by resistance. The high speed sampler of the present invention is also characterized by other optimizations, including transmission line tap compensation, stepped impedance strobe line, a multi-layer physical layout, and unique strobe generator design. A plurality of banks of such samplers are controlled for concatenated or interleaved sample intervals to achieve long sample lengths or short sample spacing. 17 figs.

  16. Non-intrusive method of measuring PCV blowby constituents

    SciTech Connect

    Crane, M.E.; Ariga, S.; Boulard, R.; Lindamood, B.

    1994-10-01

    A technique is presented that has been successfully demonstrated to non-intrusively and quickly sample gases typically found in PCV systems. Color Detection Tubes (CDTs) were used with a simple sampling arrangement to monitor CO{sub 2}, NO{sub x}, O{sub 2}, and H{sub 2}O(g) at the closure line, crankcase, and PCV line. Measurements were accurate and could be made instantaneously. Short Path Thermal Desorbtion Tubes (SPTDTs) were used at the same engine locations for the characterization of fuel- and oil-derived hydrocarbon (HC) fractions and required only 50 cc samples. High engine loads caused pushover of blowby vapors as indicated by increased concentrations of CO{sub 2}, NO{sub x}, H{sub 2}O(g), and fuel HCs in the engines` fresh air inlets during WOT operation. Peak concentrations of blowby vapors were measured in the crankcase under no load and part throttle conditions. Oxygen concentrations always opposed the trends of CO{sub 2}, NO{sub x}, and H{sub 2}O(g). SPTDT data revealed that the PCV system consumes approximately 100-200 times more fuel vapors than oil vapors, on a mass basis; however, PCV-derived oil consumption represented almost 12 percent of total engine oil consumption under no load conditions. 8 refs., 17 figs.

  17. Magnetospheric equilibrium with anisotropic pressure

    SciTech Connect

    Cheng, C.Z.

    1991-07-01

    Self-consistent magnetospheric equilibrium with anisotropic pressure is obtained by employing an iterative metric method for solving the inverse equilibrium equation in an optimal flux coordinate system. A method of determining plasma parallel and perpendicular pressures from either analytic particle distribution or particle distribution measured along the satellite's path is presented. The numerical results of axisymmetric magnetospheric equilibrium including the effects of finite beta, pressure anisotropy, and boundary conditions are presented for a bi-Maxwellian particle distribution. For the isotropic pressure cases, the finite beta effect produces an outward expansion of the constant magnetic flux surfaces in relation to the dipole field lines, and along the magnetic field the toroidal ring current is maximum at the magnetic equator. The effect of pressure anisotropy is found to further expand the flux surfaces outward. Along the magnetic field lines the westward ring current can be peak away from the equator due to an eastward current contribution resulting from pressure anisotropy. As pressure anisotropy increases, the peak westward current can become more singular. The outer boundary flux surface has significant effect on the magnetospheric equilibrium. For the outer flux boundary resembling dayside compressed flux surface due to solar wind pressure, the deformation of the magnetic field can be quite different from that for the outer flux boundary resembling the tail-like surface. 23 refs., 17 figs.

  18. Computer modeling of fluid flow and combustion in the ISV (In Situ Vitrification) confinement hood

    SciTech Connect

    Johnson, R.W.; Paik, S.

    1990-09-01

    Safety and suitability objectives for the application of the In Situ Vitrification (ISV) technology at the INEL require that the physical processes involved in ISVV be modeled to determine their operational behavior. The mathematical models that have been determined to address the modeling needs adequately for the ISV analysis package are detailed elsewhere. The present report is concerned with the models required for simulating the reacting flow that occurs in the ISV confinement hood. An experimental code named COYOTE has been secured that appears adequate to model the combustion in the confinement hood. The COYOTE code is a two-dimensional, transient, compressible, Eulerian, gas dynamics code for modeling reactive flows. It recognizes nonuniform Cartesian and cylindrical geometry and is based on the ICE (Implicit Continuous-fluid Eulerian) family of solution methods. It includes models for chemical reactions based on chemical kinetics as well as equilibrium chemistry. The mathematical models contained in COYOTE, their discrete analogs, the solution procedure, code structure and some test problems are presented in the report. 12 refs., 17 figs., 6 tabs.

  19. Geographic analysis of thermal equilibria: A bioenergetic model for predicting thermal response of aquatic insect communities: Volume 1: Technical progress report, February 1, 1985-January 31, 1988

    SciTech Connect

    Vannote, R.L.; Sweeney, B.W.

    1987-01-01

    This report summarizes the principal research findings of both laboratory and field experiments on the effects of temperature on aquatic insects. It describes a large-scale laboratory experiment that tests the validity of a general model developed to predict the seasonal pattern of growth, development, and adult emergence of aquatic insect species at different locations in their geographic range. The report details the transition of the research program from its present focus on the ecology of stream and river insect populations to a program emphasizing the role of riparian biotic and geochemical factors in regulating the dynamics of stream systems. The long-term goals are to develop the functional relationships between alluvial floodplains and its drainage network. Initially, research will focus on mechanisms regulating input storage, transformation and release of nutrients between the riparian system and streams. Volume 1 reports on field studies of natural and thermally modified river systems, as well as laboratory studies on electrophoretic analysis of insects. 12 refs., 17 figs., 2 tabs.

  20. Reassessment of selected factors affecting siting of Nuclear Power Plants

    SciTech Connect

    Davis, R.E.; Hanson, A.L.; Mubayi, V.; Nourbakhsh, H.P.

    1997-02-01

    Brookhaven National Laboratory has performed a series of probabilistic consequence assessment calculations for nuclear reactor siting. This study takes into account recent insights into severe accident source terms and examines consequences in a risk based format consistent with the quantitative health objectives (QHOs) of the NRC`s Safety Goal Policy. Simplified severe accident source terms developed in this study are based on the risk insights of NUREG-1150. The results of the study indicate that both the quantity of radioactivity released in a severe accident as well as the likelihood of a release are lower than those predicted in earlier studies. The accident risks using the simplified source terms are examined at a series of generic plant sites, that vary in population distribution, meteorological conditions, and exclusion area boundary distances. Sensitivity calculations are performed to evaluate the effects of emergency protective action assumptions on the risk of prompt fatality and latent cancers fatality, and population relocation. The study finds that based on the new source terms the prompt and latent fatality risks at all generic sites meet the QHOs of the NRC`s Safety Goal Policy by margins ranging from one to more than three orders of magnitude. 4 refs., 17 figs., 24 tabs.

  1. Evaluation of external hazards to nuclear power plants in the United States

    SciTech Connect

    Kimura, C.Y.; Budnitz, R.J.

    1987-12-01

    The Lawrence Livermore National Laboratory (LLNL) has performed a study of the risk of core damage to nuclear power plants in the United States due to externally initiated events. The broad objective has been to gain an understanding of whether or not each external initiator is among the major potential accident initiators that may pose a threat of severe reactor core damage or of large radioactive release to the environment from the reactor. Four external hazards were investigated in this report. These external hazards are internal fires, high winds/tornadoes, external floods, and transportation accidents. Analysis was based on two figures-of-merit, one based on core damage frequency and the other based on the frequency of large radioactive releases. Using these two figures-of-merit as evaluation criteria, it has been feasible to ascertain whether the risk from externally initiated accidents is, or is not, an important contributor to overall risk for the US nuclear power plants studied. This has been accomplished for each initiator separately. 208 refs., 17 figs., 45 tabs.

  2. Precise leveling determination of surface uplift patterns at the New Hydraulic Fracturing Facility, Oak Ridge National Laboratory

    SciTech Connect

    Haase, C.S.; Stow, S.H.

    1988-05-01

    Surface uplift patterns were determined for five grout injections at the New Hydrofracture Facility (NHF) during the period July 1983 through January 1984. The uplift patterns are complex. In plan view, they are elliptical to almost circular and exhibit varying degrees of cross-sectional asymmetry with one side steeper than the other. The long axis of the ellipse is more or less parallel to geological strike. The uplift patterns vary in size, shape and asymmetry from injection to injection. The region of maximum uplift is typically offset with respect to the injection point, suggesting that most hydrofracture injections dip to the south-southeast. Approximately 40 to 60% of the uplift measured 5 days after an injection subsided within 30 to 45 days. In one case, all of the uplift subsided within 70 days of injection. Modeling of the uplift patterns by simple models, based on homogeneous, isotropic subsurface conditions, suggests that hydrofractures produced by the injections are either horizontal or have shallow dips to the south-southeast. Such orientations are consistent with the hydrofracture orientations determined by gamma-ray logging in observation wells surrounding the NHF site. 19 refs., 17 figs., 1 tab.

  3. Navy Radon Assessment and Mitigation Program

    SciTech Connect

    Bertini, H.W.; Dudney, C.S.; Wilson, D.L.; Wright, T.

    1990-12-01

    During the reporting period, June, 1 1989, through May 30, 1990, radon detectors were sent to all Department of the Navy installations that contained housing areas, childcare centers, schools, hospitals, bachelor quarters, and brigs. This action was part of the screening phase of the Navy Radon Assessment and Mitigation Program. Because of detector losses, a few facilities will require rescreening. The length of time the detectors are exposed in the buildings is dependent on the time or year they were placed and the time when the doors and windows are normally closed. A 3-month exposure time is sufficient for facilities that placed detectors in building when they would be closed. Otherwise detectors will be exposed for about 1 year. To date, about 9,000 detectors (out of a total of 27,100 detectors sent to the field) have been returned for a determination of exposure levels. About 2,000 detectors have been analyzed and the information sent to the Navel Facilities Engineering Command Headquarters for forwarding to the installations. Except for the additional installations requiring rescreening, the screening effort results should be available this calendar year. The rescreening results should be available by mid-1991. Assessment will start this calendar year based on the results from screening. Initial emphasis will be on housing, child-care centers, schools, and hospitals. 6 refs., 17 figs., 16 tabs.

  4. Three-dimensional detailed numerical model of a field-scale rotary kiln incinerator

    SciTech Connect

    Leger, C.B.; Cundy, V.A.; Sterling, A.M. )

    1993-04-01

    A detailed three-dimensional numerical model of baseline (support burners only) operation in a rotary kiln incinerator is presented. The focus of this model is on gas-phase fluid mechanics, neglecting solid waste combustion and radiative heat transfer. The model is compared to experimental data, and although relatively crude, it demonstrates remarkably good qualitative and quantitative predictive capability. The model demonstrates that thermal buoyancy is the cause of observed vertical stratification near the exit of the modeled kiln. The model also suggests that the addition of turbulence mixing air actually increases the degree of stratification rather than augmenting mixing, as had been previously suggested. Elucidating the mechanism by which this occurs has resulted in a reinterpretation of the experimental data. The model also suggests that there is probably a zone of recirculation across the kiln exit plane. A parametric study using the model shows that the location and quantity of leak air into the kiln have a major influence on the flow inside the kiln. The study suggests that preheating turbulence air may have little effect on gas-phase mixing. Overall, this modeling study has demonstrated that a relatively simple numerical model of a rotary kiln incinerator can provide valuable insight into the process, especially when used in conjunction with experimental data. 21 refs., 17 figs., 3 tabs.

  5. Leaching action of EJ-13 water on unirradiated UO{sub 2} surfaces under unsaturated conditions at 90{degree}C: Interim report

    SciTech Connect

    Wronkiewicz, D.J.; Bates, J.K.; Gerding, T.J.; Veleckis, E.; Tani, B.S.

    1991-07-01

    A set of experiments, based on the application of the Unsaturated Test method to the reaction of UO{sub 2} with EJ-13 water, has been conducted over a period of 182.5 weeks. One half of the experiments have been terminated, while one half are still ongoing. Solutions that have dripped from UO{sub 2} specimens have been analyzed for all experiments, while the reacted UO{sub 2} surfaces have been examined for only the terminated experiments. A pulse of uranium release from the UO{sub 2} solid, in conjunction with the formation of dehydrated schoepite on the surface of the UO{sub 2}, was observed during the 39- to 96-week period. Thereafter, the uranium release decreased and a second set of secondary phases was observed. The latter phases incorporate cations from the EJ-13 water and include boltwoodite, uranophane, sklodowskite, compreignacite, and schoepite. The experiments are being continued to monitor for additional changes in solution composition and secondary phase formation, and have now reached the 319-week period. 9 refs., 17 figs., 25 tabs.

  6. Genesis of presolar diamonds: Comparative high-resolution transmission electron microscopy study of meteoritic and terrestrial nano-diamonds

    SciTech Connect

    Daulton, T.L. |; Eisenhour, D.D.; Buseck, P.R.

    1996-12-01

    Nano-diamonds isolated from acid dissolution residues of primitive carbonaceous meteorites (Allende and Murchison) were studied using high-resolution transmission electron microscopy. To discriminate among their most likely formation mechanisms, high-pressure shock-induced metamorphism or low-pressure vapor condensation. the microstructures of presolar diamond crystallites were compared to those of (terrestrial) synthesized nano-diamonds. The synthesized diamonds used for comparison in this study were produced by high-pressure shock waves generated in controlled detonations and by direct nucleation and homoepitaxial growth from the vapor phase in low-pressure chemical vapor deposition (CVD)-type processes. Microstructural features were identified that appear unique to shock metamorphism and to nucleation from the vapor phase, respectively. A comparison of these features to the microstructures found in presolar diamonds indicates that the predominant mechanism for presolar diamond formation is a vapor deposition process, suggesting a circumstellar condensation origin. A new presolar grain component has also been identified in the meteoritic residues, the (2H) hexagonal polytype of diamond (lonsdaleite). 93 refs., 17 figs., 1 tab.

  7. Recommendations for the shallow-crack fracture toughness testing task within the HSST (Heavy-Section Steel Technology) Program

    SciTech Connect

    Theiss, T.J. )

    1990-09-01

    Recommendations for Heavy-Section Steel Technology Program's investigation into the influence of crack depth on the fracture toughness of a steel prototypic of those in a reactor pressure vessel are included in this report. The motivation for this investigation lies in the fact that probabilistic fracture mechanics evaluations show that shallow flaws play a dominant role in the likelihood of vessel failure, and shallow-flaw specimens have exhibited an elevated toughness compared with conventional deep-notch fracture toughness specimens. Accordingly, the actual margin of safety of vessels may be greater than that predicted using existing deep-notch fracture-toughness results. The primary goal of the shallow-crack project is to investigate the influence of crack depth on fracture toughness under conditions prototypic of a reactor vessel. A limited data base of fracture toughness values will be assembled using a beam specimen of prototypic reactor vessel material and with a depth of 100 mm (4 in.). This will permit comparison of fracture-toughness data from deep-cracked and shallow-crack specimens, and this will be done for several test temperatures. Fracture-toughness data will be expressed in terms of the stress-intensity factor and crack-tip-opening displacement. Results of this investigation are expected to improve the understanding of shallow-flaw behavior in pressure vessels, thereby providing more realistic information for application to the pressurized-thermal shock issues. 33 refs., 17 figs.

  8. Optical filter including a sub-wavelength periodic structure and method of making

    DOEpatents

    Kaushik, S.; Stallard, B.R.

    1998-03-10

    An optical filter includes a dielectric layer formed within a resonant optical cavity, with the dielectric layer having formed therein a sub-wavelength periodic structure to define, at least in part, a wavelength for transmission of light through the resonant optical cavity. The sub-wavelength periodic structure can be formed either by removing material from the dielectric layer (e.g. by etching through an electron-beam defined mask), or by altering the composition of the layer (e.g. by ion implantation). Different portions of the dielectric layer can be patterned to form one or more optical interference filter elements having different light transmission wavelengths so that the optical filter can filter incident light according to wavelength and/or polarization. For some embodiments, the optical filter can include a detector element in optical alignment with each optical interference filter element to quantify or measure the filtered light for analysis thereof. The optical filter has applications to spectrometry, colorimetry, and chemical sensing. 17 figs.

  9. Steam-explosion safety considerations for the Advanced Neutron Source Reactor at the Oak Ridge National Laboratory

    SciTech Connect

    Taleyarkhan, R.

    1990-02-01

    This report provides a perspective on steam-explosion safety and design issues for the Advanced Neutron Source (ANS) reactor being designed at the Oak Ridge National Laboratory. A historical background along with a description of experiments and analytical work performed to date has been provided. Preliminary analyses (for the ANS) have been conducted to evaluate steam-explosion pressure- pulse loadings, the effects of reactor coolant system (RCS) overpressurization, and slug energetics. The method used for pressure-pulse magnitude evaluation was benchmarked with previous calculations, an aluminum-water steam-explosion experiment, and test reactor steam explosion data with good agreement. Predicted pressure-pulse magnitudes evaluated were found to be several orders of magnitude lower than corresponding values evaluated by correlating available energies with shock-wave pressures from equivalent chemical detonations. The preliminary best estimate, as well as conservative estimates for RCS volume-pressurization failure and slug energetics for RCS volume-pressurization failure and slug energetics, indicated that (1) steam explosions in the ANS have significant damage potential, and (2) steam-explosion issues must be considered during the design phase of the ANS Project. Recommendations are made for efficiently addressing this important safety and design issue. 38 refs., 17 figs., 11 tabs.

  10. Progress report on the use of hybrid silicon pin diode arrays in high energy physics

    SciTech Connect

    Shapiro, S.L. ); Jernigan, J.G.; Arens, J.F. . Space Sciences Lab.)

    1990-05-01

    We report on the successful effort to develop hybrid PIN diode arrays and to demonstrate their potential as components of vertex detectors. Hybrid pixel arrays have been fabricated by the Hughes Aircraft Co. by bump-bonding readout chips developed by Hughes to an array of PIN diodes manufactured by Micron Semiconductor Inc. These hybrid pixel arrays were constructed in two configurations. One array format has 10 {times} 64 pixels, each 120 {mu}m square; and the other format has 256 {times} 156 pixels, each 30 {mu}m square. In both cases, the thickness of the PIN diode layer is 300 {mu}m. Measurements of detector performance show that excellent position resolution can be achieved by interpolation. By determining the centroid of the charge cloud which spreads charge into a number of neighboring pixels, a spatial resolution of a few microns has been attained. The noise has been measured to be about 300 electrons (rms) at room temperature, as expected from KTC and dark current considerations, yielding a signal-to-noise ratio of about 100 for minimum ionizing particles. 4 refs., 17 figs.

  11. Apparatus for and method of testing an electrical ground fault circuit interrupt device

    DOEpatents

    Andrews, L.B.

    1998-08-18

    An apparatus for testing a ground fault circuit interrupt device includes a processor, an input device connected to the processor for receiving input from an operator, a storage media connected to the processor for storing test data, an output device connected to the processor for outputting information corresponding to the test data to the operator, and a calibrated variable load circuit connected between the processor and the ground fault circuit interrupt device. The ground fault circuit interrupt device is configured to trip a corresponding circuit breaker. The processor is configured to receive signals from the calibrated variable load circuit and to process the signals to determine a trip threshold current and/or a trip time. A method of testing the ground fault circuit interrupt device includes a first step of providing an identification for the ground fault circuit interrupt device. Test data is then recorded in accordance with the identification. By comparing test data from an initial test with test data from a subsequent test, a trend of performance for the ground fault circuit interrupt device is determined. 17 figs.

  12. Method and apparatus for assembling solid oxide fuel cells

    DOEpatents

    Szreders, B.E.; Campanella, N.

    1988-05-11

    This invention relates generally to solid oxide fuel power generators and is particularly directed to improvements in the assembly and coupling of solid oxide fuel cell modules. A plurality of jet air tubes are supported and maintained in a spaced matrix array by a positioning/insertion assembly for insertion in respective tubes of a solid oxide fuel cell (SOFC) in the assembly of an SOFC module. The positioning/insertion assembly includes a plurality of generally planar, elongated, linear vanes which are pivotally mounted at each end thereof to a support frame. A rectangular compression assembly of adjustable size is adapted to receive and squeeze a matrix of SOFC tubes so as to compress the inter-tube nickel felt conductive pads which provide series/parallel electrical connection between adjacent SOFCs, with a series of increasingly larger retainer frames used to maintain larger matrices of SOFC tubes in position. Expansion of the SOFC module housing at the high operating temperatures of the SOFC is accommodated by conductive, flexible, resilient expansion, connector bars which provide support and electrical coupling at the top and bottom of the SOFC module housing. 17 figs.

  13. The proton storage ring: Problems and solutions

    SciTech Connect

    Macek, R.J.

    1988-01-01

    The Los Alamos Proton Storage Ring (PSR) now operates with 35..mu..A at 20-Hz pulse repetition rate. Beam availability during 1988 suffered because of a number of problems with hardware reliability and from narrow operating margins for beam spill in the extraction line. A strong effort is underway to improve reliability with an eventual goal of obtaining beam availability in excess of 75%. Beam losses and the resulting component activation have limited operating currents to their present values. In detailed studies of the problem, loss rates were found to be approximately proportional to the circulating current and can be understood by a detailed accounting of emittance growth in the two-step injection process along with Coulomb scattering of the stored beam during multiple traversals of the injection foil. It is now apparent that the key to reducing losses is in reducing the number of foil traversals. A program of upgrades to reduce losses and improve the operating current is being planned. 8 refs., 17 figs., 2 tabs.

  14. Basis for the ICRP`s age-specific biokinetic model for uranium

    SciTech Connect

    Leggett, R.W.

    1994-12-01

    In an effort motivated largely by the Chernobyl nuclear accident, the International Commission on Radiological Protection (ICRP) is developing age-specific biokinetic models and dose coefficients for environmentally important radionuclides. This paper describes the ICRP`s age-specific biokinetic model for uranium. The model is constructed within a physiologically based framework originally developed for application to the alkaline earth elements but sufficiently general to apply to the larger class of bone-volume-seeking elements. Transfer rates for a reference adult are based mainly on: (1) measurements of uranium in blood and excreta of several human subjects who were intravenously injected with uranium; (2) postmortem measurements of uranium in tissues of some of those subjects; (3) postmortem measurements of uranium in tissues of occupationally and non-occupationally exposed subjects; (4) data on baboons, dogs, and smaller laboratory animals exposed to uranium for experimental purposes; and (5) consideration of the physiological processes thought to control retention and translocation of uranium in the body. Transfer rates for the adult are extended to children by application of a set of generic assumptions applied by the ICRP to calcium-like elements. These assumptions were derived mainly from observations of the age-specific biokinetics of the alkaline earth elements and lead in humans and laboratory animals but are consistent with available age-specific biokinetic data on uranium. 82 refs., 17 figs., 8 tabs.

  15. Fuels from microalgae

    SciTech Connect

    Not Available

    1989-06-01

    Many species of aquatic plants can provide a source of renewable energy. Some species of microalgae, in particular, produce lipids -- oils that can be extracted and converted to a diesel fuel substitute or to gasoline. Since 1979 the Aquatic Species Program element of the Biofuels Program, has supported fundamental and applied research to develop the technology for using this renewable energy resource. This document, produced by the Solar Technical Information Program, provides an overview of the DOE/SERI Aquatic Species Program element. Chapter 1 is an introduction to the program and to the microalgae. Chapter 2 is an overview of the general principles involved in making fuels from microalgae. It also outlines the technical challenges to producing economic, high-energy transportation fuels. Chapter 3 provides an overview of the Algal Production and Economic Model (APEM). This model was developed by researchers within the program to identify aspects of the process critical to performance with the greatest potential to reduce costs. The analysis using this model has helped direct research sponsored by the program. Finally, Chapter 4 provides an overview of the Aquatic Species Program and describes current research. 28 refs., 17 figs.

  16. Torsional rheometer for granular materials slurries and gas-solid mixtures and related methods

    DOEpatents

    Rajagopal, C.; Rajagopal, K.R.; Yalamanchili, R.C.

    1997-03-11

    A torsional rheometer apparatus for determining rheological properties of a specimen is provided. A stationary plate and a rotatable plate are in generally coaxial position and structured to receive a specimen there between. In one embodiment, at least one of the plates and preferably both have roughened specimen engaging surfaces to serve to reduce undesired slippage between the plate and the specimen. A motor is provided to rotate the rotatable plate and a transducer for monitoring forces applied to the stationary plate and generating output signals to a computer which determines the desired rheological properties are provided. In one embodiment, the roughened surfaces consist of projections extending toward the specimen. Where granular material is being evaluated, it is preferred that the roughness of the plate is generally equal to the average size of the granular material being processed. In another embodiment, an air-solid mixture is processed and the roughened portions are pore openings in the plates. Air flows through the region between the two pore containing plates to maintain the solid materials in suspension. In yet another embodiment, the base of the stationary plate is provided with a deformable capacitance sensor and associated electronic means. 17 figs.

  17. Constrained space camera assembly

    DOEpatents

    Heckendorn, F.M.; Anderson, E.K.; Robinson, C.W.; Haynes, H.B.

    1999-05-11

    A constrained space camera assembly which is intended to be lowered through a hole into a tank, a borehole or another cavity is disclosed. The assembly includes a generally cylindrical chamber comprising a head and a body and a wiring-carrying conduit extending from the chamber. Means are included in the chamber for rotating the body about the head without breaking an airtight seal formed therebetween. The assembly may be pressurized and accompanied with a pressure sensing means for sensing if a breach has occurred in the assembly. In one embodiment, two cameras, separated from their respective lenses, are installed on a mounting apparatus disposed in the chamber. The mounting apparatus includes means allowing both longitudinal and lateral movement of the cameras. Moving the cameras longitudinally focuses the cameras, and moving the cameras laterally away from one another effectively converges the cameras so that close objects can be viewed. The assembly further includes means for moving lenses of different magnification forward of the cameras. 17 figs.

  18. An electron microscopical study of chronic ulcers of the colon in rats.

    PubMed Central

    Reeve, D. R.

    1977-01-01

    Chronic colonic ulcers in the rat were produced by the administration of a hydrogen peroxide enema. Lesions of up to 10 months' duration were obtained by this method and a selection was examined ultrastructurally. It was hoped that the study would reveal causes for the chronicity of the lesions. From previous work it appeared that there was no failure of epithelial migration from the edge of the wound. The majority of cells at the ulcer margins demonstrated features of regeneration similar to those seen in other tissues, and that there were no specific changes concomitant with chronic ulceration. The majority of epithelial cells at the ulcer edge showed features of differentiation which indicated that there was no obvious fault in this process so essential to the basic requirements of tissue repair. It is possible that chronicity is produced by a failure of the epithelio-mesenchymal interaction mechanisms which, potentiated by an ischaemia resulting from submucosal vascular damage, results in the consequential death of migrating epithelial cells. This hypothesis is supported by the appearance of a squamous metaplasia in the healing lesions, a process which is commonly attributed to a chronic inflammatory response which may be induced by a relative vascular insufficiency. Images Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 1 Fig. 2 Fig. 3 Fig. 8 Fig. 9 Fig. 10 PMID:836769

  19. Protective supplied breathing air garment

    DOEpatents

    Childers, E.L.; Hortenau, E.F. von.

    1984-07-10

    A breathing air garment is disclosed for isolating a wearer from hostile environments containing toxins or irritants includes a suit and a separate head protective enclosure or hood engaging a suit collar in sealing attachment. The hood and suit collar are cylindrically shaped and dimensioned to enable the wearer to withdraw his hands from the suit sleeves to perform manual tasks within the hood interior. Breathing air is supplied from an external air line with an air delivery hose attached to the hood interior. The hose feeds air into an annular halo-like fiber-filled plenum having spaced discharge orifices attached to the hood top wall. A plurality of air exhaust/check valves located at the suit extremities cooperate with the hood air delivery system to provide a cooling flow of circulating air from the hood throughout the suit interior. A suit entry seal provided on the suit rear torso panel permits access into the suit and is sealed with an adhesive sealing flap. 17 figs.

  20. In-Home Performance of Exempt Pellet Stoves in Medford, Oregon.

    SciTech Connect

    Barnett, Stockton G.; Fields, Paula G.

    1991-07-05

    Pellet stoves that are considered exempt'' operate at an air-to-fuel ratio in excess of 35:1. They therefore qualify for exemption from the emissions certification process. A primary goal of this project was to determine how a sample of such stoves, operated in homes, would perform compared to their certified cousins,'' which were evaluated the previous year. In-home performance data documenting emissions from exempt stoves and net delivered efficiencies was particularly desired. This project evaluated six pellet stoves representing three major brands in Medford, Oregon. There were three Breckwell model P24FS, one Horizon Eclipse, one Horizon Destiny, and one Earth Stove TP40. The stoves were monitored for four week-long intervals in January and February 1991, for a total of 24 tests. Evaluations were conducted for particulate, CO (carbon monoxide) and PAH (polycyclic aromatic hydrocarbon) emissions and net efficiency. Monitoring was conducted using the AWES (automated woodstove emissions sampler) sampling system. A new data logger, developed for this project, was used to control the AWES and record real time data. 22 refs., 17 figs., 6 tabs.

  1. Long-term performance assessment of grouted phosphate/sulfate waste from N Reactor operations

    SciTech Connect

    Sewart, G.H.; Farris, W.T.; Huizenga, D.G.; McMakin, A.H.; Streile, G.P.; Treat, R.L.

    1987-04-01

    Phosphate sulfate waste (PSW) is a low-level liquid generated by activities associated with N Reactor operations. The waste will be mixed with dry solids and permanently disposed of as a cementitious grout in sub-surface concrete vaults at Hanford's 200-East Area. Categories of scenarios were analyzed that could cause humans to be exposed to radionuclides and chemicals from the grouted waste include contaminated groundwater and direct intrusion. In the groundwater scenario, contaminants are released from the buried grout monoliths, then eventually transported via the groundwater to the Columbia River. As modeled, the contaminants are assumed to leach out of the monoliths at a constant rate over a 10,000-year period. The other category of exposure involves intruders who inadvertently contact the waste directly, either by drilling, excavating, or gardening. Long-term impacts that could result from disposal of PSW grout were expressed in terms of incremental increases of chemical concentrations in the groundwater and surface waters, and radiation doses. None of the calculated impacts exceeded the corresponding regulatory limits set by Washington State, the Department of Energy, or the Nuclear Regulatory Commission. 38 refs., 17 figs., 27 tabs.

  2. New industrial heat pump applications to fructose production

    SciTech Connect

    Not Available

    1990-04-01

    An energy cost reduction study of the American Fructose Decatur,Inc. High Fructose Corn Syrup process has been completed. The objective was to find cost effective energy cost reduction projects and to develop a coherent strategy for realizing the savings. There are many possible options for reducing energy cost. To facilitate a fair comparison of the options, Pinch Technology was used to identify appropriate heat recovery, heat pumping and cogeneration options. Of particular interest were the opportunities for utilizing heat pumps, for energy cost reduction or other profit increasing uses. Therefore, where a heat pumping scheme was identified, its merits relative to other potential projects was carefully evaluated to ensure that the heat pump was technically and economically sound. It is felt that the results obtained in this study are applicable to other wet corn milling sites which include a refinery section, due to the similarity of processes throughout the industry. This study and others indicate that reductions in thermal energy consumption of 15--25% can be expected through increased heat recovery. Also, the use of MVR and thermocompression evaporators is appropriate and additional economically viable opportunities exist for using industrial heat pumps to increase even further the level of energy cost reduction achievable. 17 figs., 4 tabs.

  3. Environmental surveillance data report for the third quarter of 1987

    SciTech Connect

    Daniels, K.L.; Goldberg, P.Y.; Horwedel, B.M.; McCollough, I.L.; Osborne-Lee, A.E.; Owenby, R.K.; Watson, J.B.; Wilson, M.M.

    1987-12-01

    During the third quarter of 1987, over 1600 samples which represent more than 5000 analyses and measurements were collected by the Environmental Monitoring and Compliance (EMC) Department. Uranium concentrations measured on air filters near the Y-12 plant were higher than normal due to a release from that facility in May. More than 60% of the noncompliances with the NPDES permit for the third quarter occurred in July. These were primarily in total suspended solids at the Sewage Treatment Plant. The cause of these high concentrations has been explored with the plant operating staff but is currently unresolved. Because of past noncompliances in fecal coliform and chlorine concentrations at the Sewage Treatment Plant, an engineering review has been initiated to examine the present chlorination system. This review is intended to provide a permanent solution to these types of problems. Maximum concentrations of total radioactive strontium (/sup 89/Sr + /sup 90/Sr) in bluegill were lower than those measured during the second quarter. There were not significant differences in the total radioactive strontium in blue gill at any of the Clinch River locations. 17 figs., 45 tabs.

  4. Ultrastructural Changes in Chick Cerebellum Induced by Polyinosinic Polycytidylic Acid

    PubMed Central

    Yu, Mang C.; Young, Paul A.; Yu, Wan-Hua Amy

    1971-01-01

    The ultrastructural changes in cerebellar encephalopathy induced by intravenous injection of poly I:C in young chickens were studied. The neuroglia and the small blood vessels showed the most severe injury. In the astroglia, initial alterations consisted of a mild cytoplasmic swelling whereas terminally, evagination of the outer nuclear membrane, formation of large vacuoles, and mitochondrial swelling occurred. In the cortex, oligodendroglial alterations consisted of dilatation of the nuclear membranes and of the endoplasmic reticulum, whereas in the white matter, the interfascicular oligodendroglia exhibited clumping and coagulation of the chromatin material. Some small blood vessels appeared normal, while others showed massive erosion of the endothelium resulting in aneurysm-like ballooning of the vascular wall. The granule cells displayed marked edema. The myelin of nerve fibers showed an accumulation of fluid initially, with splitting occurring in the terminal stages. These studies indicated a severe cytotoxic effect of poly I:C on the cerebella of young chickens. ImagesFig 16Fig 17Fig 13Fig 14Fig 15Fig 5Fig 6Fig 7Fig 8Fig 9Fig 10Fig 11Fig 12Fig 1Fig 2Fig 3Fig 4 PMID:5142269

  5. Test design description for the Fusion Materials Open Test Assembly (Fusion MOTA-2A): Volume 1A, Part 1

    SciTech Connect

    Bauer, R.E.

    1988-11-01

    This document encompasses the test requirements, hardware design, fabrication, and safety analysis for the Fusion Materials Open Test Assembly experiment for irradiation in FFTF Cycle 11 (Fusion MOTA-2A). Fusion MOTA is equally shared by the US Fusion Material (DOE), Japanese Fusion Materials (MONBUSHO), and BEATRIX-II (IEA) programs. In the interest of providing optimum use of the irradiation space in the Fusion MOTA-2A and LMR MOTA-1G, eight of the Fusion MOTA canisters will be placed in MOTA-1G and an equal number of LMR canisters placed in Fusion MOTA-2A (Powell/Doran 1988). This eliminates the need to process Fusion MOTA-2A through the IEM cell prior to insertion for FFTF Cycle 11A. The LMR MOTA design and safety analysis (Greenslade 1984) is the basis for much of this design and safety analysis report. This design description and safety analysis for the Fusion MOTA-2A is presented per the outline given in Chapter IV of the FTR User`s Guide (Taylor 1978). 35 refs., 17 figs., 9 tabs.

  6. A method for designing a redirector/reconcentrator for use at the Central Receiver Test Facility (CRTF)

    SciTech Connect

    Ghanbari, C.M.; Mulholland, G.P.; Otts, J.V.

    1989-01-01

    The Central Receiver Test Facility (CRTF), operated for the Department of Energy by Sandia National Laboratories in Albuquerque, New Mexico, was constructed to evaluate design concepts for solar central receivers. The facility consists of an array of 222 heliostats in a northfield configuration that reflects and focuses the sun's energy toward a tower 60 m high. Throughout the history of the CRTF, there has been an interest in beam redirectors or reconcentrators. The objective of this paper is to discuss the numerous code modifications required for the facility code HELIOS to be able to model the redirector-radome configuration. This model simulates the solar flux-density pattern from reflecting concentrators and follows the incident solar radiation through the atmosphere, the collection system, and finally onto the target. The model includes most pertinent factors that influence the optical performance of a collector system. Although the standard output contains information concerning sun shape distributions and atmospheric attenuation, probably the most useful output is the flux-density pattern at a grid of points on a receiver surface and the integral of this distribution over the surface to obtain power. 3 refs., 17 figs.

  7. Mechanical integrity test methods for Class 2 injection wells

    SciTech Connect

    Smith, K.P.

    1991-03-01

    Mechanical integrity testing of injection wells to ensure that they do not threaten an underground source of drinking water (USDW) is a key component of the Underground Injection Control (UIC) program of the Safe Drinking Water Act of 1974. Approximately 55% of all active injection wells are classified as Class II wells. These wells are used by the oil and gas industry primarily to dispose of waste fluids or to enhance production of hydrocarbons. Mechanical integrity is defined as the absence of significant leaks in the casing, tubing, or packers (internal integrity); and the absence of significant fluid movement into a USDW through cement channels behind the casing (external integrity). A wide variety of mechanical integrity test (MIT) methods have been developed to meet federal and primacy state program requirements. The internal mechanical integrity of standard injection wells can be evaluated by radioactive tracer surveys, standard annular pressure tests, annulus pressure monitoring, and continuous injection pressure versus injection rate monitoring. These tests are listed in order of decreasing reliability and increasing detection limits. 28 refs., 17 figs., 6 tabs.

  8. A study of surfactant-assisted waterflooding

    SciTech Connect

    Scamehorn, J F; Harwell, J H

    1990-09-01

    In surfactant-assisted waterflooding, a surfactant slug is injected into a reservoir, followed by a brine spacer, followed by second surfactant slug. The charge on the surfactant in the first slug has opposite sign to that in the second slug. When the two slugs mix in the reservoir, a precipitate or coacervate is formed which plugs the permeable region of the reservoir. Subsequently injected water or brine is forced through the low permeability region of the reservoir, increasing sweep efficiency of the waterflood, compared to a waterflood not using surfactants. In this part of the work, two major tasks are performed. First, core floods are performed with oil present to demonstrate the improvement in incremental oil production, as well as permeability modification. Second, a reservoir simulation model will be proposed to further delineate the optimum strategy for implementation of the surfactant-assisted waterflooding, as well as indicate the reservoir types for which it would be most effective. Surfactants utilized were sodium dodecyl sulfate and dodecyl pyridinium chloride. 44 refs., 17 figs., 3 tabs.

  9. Details: MHD topping cycle analysis and component design. Volume II. Final report

    SciTech Connect

    Not Available

    1984-06-01

    The MHD generator performances were calculated for the prototype retrofit MHD power system and for the 50 MW/sub th/ and 80 MW/sub th/ CDIF MHD power systems. The generators were all designed to operate with preheated (1200/sup 0/F) oxygen-enriched air and Montana Rosebud coal dried to 5% moisture content. Fuel-rich conditions were used in the MHD combustion process for NO/sub x/ emission control with an oxidizer/fuel equivalence ratio of 0.9. The seed concentration was 1% potassium by weight of the total combustion gas. Table 1 summarizes the important parameters for the three selected MHD generator designs. The basic calculational procedure adopted in APT Task I is followed in the present analyses in order to determine the operating conditions of the MHD generator. This procedure was used to ensure that the generator will produce optimum power output consistent with a set of prescribed generator constraints. In all generator designs, the critical electrical and thermal stresses of the channel and its gasdynamic design parameters were limited to values which are reasonable based on the experience gained from long duration MHD channel testing. 17 figs., 6 tabs.

  10. Chaos of Wolbachia Sequences Inside the Compact Fig Syconia of Ficus benjamina (Ficus: Moraceae)

    PubMed Central

    Niu, Li-Ming; Ma, Guang-Chang; Cook, James M.; Bian, Sheng-Nan; Fu, Yue-Guan; Huang, Da-Wei

    2012-01-01

    Figs and fig wasps form a peculiar closed community in which the Ficus tree provides a compact syconium (inflorescence) habitat for the lives of a complex assemblage of Chalcidoid insects. These diverse fig wasp species have intimate ecological relationships within the closed world of the fig syconia. Previous surveys of Wolbachia, maternally inherited endosymbiotic bacteria that infect vast numbers of arthropod hosts, showed that fig wasps have some of the highest known incidences of Wolbachia amongst all insects. We ask whether the evolutionary patterns of Wolbachia sequences in this closed syconium community are different from those in the outside world. In the present study, we sampled all 17 fig wasp species living on Ficus benjamina, covering 4 families, 6 subfamilies, and 8 genera of wasps. We made a thorough survey of Wolbachia infection patterns and studied evolutionary patterns in wsp (Wolbachia Surface Protein) sequences. We find evidence for high infection incidences, frequent recombination between Wolbachia strains, and considerable horizontal transfer, suggesting rapid evolution of Wolbachia sequences within the syconium community. Though the fig wasps have relatively limited contact with outside world, Wolbachia may be introduced to the syconium community via horizontal transmission by fig wasps species that have winged males and visit the syconia earlier. PMID:23145008

  11. The International Coal Statistics Data Base operations guide

    SciTech Connect

    Not Available

    1991-04-01

    The International Coal Statistics Data base (ICSD) is a micro- computer based system which contains informations related to international coal trade. This includes coal production, consumption, imports and exports information. The ICSD is a secondary data base, meaning that information contained therein is derived entirely from other primary sources. It uses dBase 3+ and Lotus 1-2-3 to locate, report and display data. The system is used for analysis in preparing the Annual Prospects for World Coal Trade (DOE/EIA-0363) publication. The ICSD system is menu driven, and also permits the user who is familiar with dBase and Lotus operations to leave the menu structure to perform independent queries. Documentation for the ICSD consists of three manuals -- the User's Guide, the Operations Manual and the Program Maintenance Manual. This Operations Manual explains how to install the programs, how to obtain reports on coal trade, what systems requirements apply, and how to update the major data files. It also explains file naming conventions, what each file does, and the programming procedures used to make the system work. The Operations Manual explains how to make the system respond to customized queries. It is organized around the ICSD menu structure and describes what each selection will do. Sample reports and graphs generated from individual menu selection are provided to acquaint the user with the various types of output. 17 figs.

  12. Development of a current collection loss management system for SDI homopolar power supplies

    SciTech Connect

    Brown, D.W.

    1989-01-01

    High speed, high power density current collection systems have been identified as an enabling technology required to construct homopolar power supplies to meet SDI missions. This work is part of a three-year effort directed towards the analysis, experimental verification, and prototype construction of a current collection system designed to operate continuously at 2 kA/cm{sup 2}, at a rubbing speed of 200 m/s, and with acceptable losses in a space environment. To data, no system has achieved these conditions simultaneously. This is the annual report covering the second year period of performance on DOE contract DE-AC03-86SF16518. Major areas covered include design, construction and operation of a cryogenically cooled brush test rig, design and construction of a high speed brush test rig, optimization study for homopolar machines, loss analysis of the current collection system, and an application study which defines the air-core homopolar construction necessary to achieve the goal of 80--90 kW/kg generator power density. 17 figs., 2 tabs.

  13. Chaos of Wolbachia sequences inside the compact fig syconia of Ficus benjamina (Ficus: moraceae).

    PubMed

    Yang, Chun-Yan; Xiao, Jin-Hua; Niu, Li-Ming; Ma, Guang-Chang; Cook, James M; Bian, Sheng-Nan; Fu, Yue-Guan; Huang, Da-Wei

    2012-01-01

    Figs and fig wasps form a peculiar closed community in which the Ficus tree provides a compact syconium (inflorescence) habitat for the lives of a complex assemblage of Chalcidoid insects. These diverse fig wasp species have intimate ecological relationships within the closed world of the fig syconia. Previous surveys of Wolbachia, maternally inherited endosymbiotic bacteria that infect vast numbers of arthropod hosts, showed that fig wasps have some of the highest known incidences of Wolbachia amongst all insects. We ask whether the evolutionary patterns of Wolbachia sequences in this closed syconium community are different from those in the outside world. In the present study, we sampled all 17 fig wasp species living on Ficus benjamina, covering 4 families, 6 subfamilies, and 8 genera of wasps. We made a thorough survey of Wolbachia infection patterns and studied evolutionary patterns in wsp (Wolbachia Surface Protein) sequences. We find evidence for high infection incidences, frequent recombination between Wolbachia strains, and considerable horizontal transfer, suggesting rapid evolution of Wolbachia sequences within the syconium community. Though the fig wasps have relatively limited contact with outside world, Wolbachia may be introduced to the syconium community via horizontal transmission by fig wasps species that have winged males and visit the syconia earlier.

  14. Apparatus for measuring minority carrier lifetimes in semiconductor materials

    DOEpatents

    Ahrenkiel, R.K.

    1999-07-27

    An apparatus for determining the minority carrier lifetime of a semiconductor sample includes a positioner for moving the sample relative to a coil. The coil is connected to a bridge circuit such that the impedance of one arm of the bridge circuit is varied as sample is positioned relative to the coil. The sample is positioned relative to the coil such that any change in the photoconductance of the sample created by illumination of the sample creates a linearly related change in the input impedance of the bridge circuit. In addition, the apparatus is calibrated to work at a fixed frequency so that the apparatus maintains a consistently high sensitivity and high linearly for samples of different sizes, shapes, and material properties. When a light source illuminates the sample, the impedance of the bridge circuit is altered as excess carriers are generated in the sample, thereby producing a measurable signal indicative of the minority carrier lifetimes or recombination rates of the sample. 17 figs.

  15. Geochemical and geologic factors effecting the formulation of gas hydrate: Task No. 5, Final report

    SciTech Connect

    Kvenvolden, K.A.; Claypool, G.E.

    1988-01-01

    The main objective of our work has been to determine the primary geochemical and geological factors controlling gas hydrate information and occurrence and particularly in the factors responsible for the generation and accumulation of methane in oceanic gas hydrates. In order to understand the interrelation of geochemical/geological factors controlling gas hydrate occurrence, we have undertaken a multicomponent program which has included (1) comparison of available information at sites where gas hydrates have been observed through drilling by the Deep Sea Drilling Project (DSDP) on the Blake Outer Ridge and Middle America Trench; (2) regional synthesis of information related to gas hydrate occurrences of the Middle America Trench; (3) development of a model for the occurrence of a massive gas hydrate as DSDP Site 570; (4) a global synthesis of gas hydrate occurrences; and (5) development of a predictive model for gas hydrate occurrence in oceanic sediment. The first three components of this program were treated as part of a 1985 Department of Energy Peer Review. The present report considers the last two components and presents information on the worldwide occurrence of gas hydrates with particular emphasis on the Circum-Pacific and Arctic basins. A model is developed to account for the occurrence of oceanic gas hydrates in which the source of the methane is from microbial processes. 101 refs., 17 figs., 6 tabs.

  16. Mechanisms for selective agglomeration of coals

    SciTech Connect

    Wheelock, T.D.; Drzymala, J.; Allen, R.W.; Hu, Y.-C.; Tyson, D.; Xiaoping, Qiu; Lessa, A.

    1989-05-01

    Work continued on the basic mechanisms which underlie various processes for beneficiating aqueous suspensions of coal by selective agglomeration with oil. A new method was demonstrated for characterizing the agglomerability of coal suspensions. This method utilizes a photometric dispersion analyzer to monitor changes in the turbidity of a particle suspension as increasing amounts of oil are added to the suspension in a batch agglomeration test. Agglomeration of the particles leads to a marked decrease in the turbidity of the suspension. Another experimental technique was also demonstrated for characterizing oil agglomeration. This technique involves measuring the rate of growth of agglomerates in a continuous flow system operating under stead-state conditions. The data are analyzed by means of a population balance. The results of a preliminary set of experiments in which Indiana V seam coal was agglomerated with tetralin seemed to fit a particular growth model very well. Equipment was also constructed for studying the kinetics of agglomeration in a batch process. While earlier work showed that quebracho (a commercially available dispersant) is a strong agglomeration depressant for pyrite, recent experiments with mixtures of Upper Freeport coal and mineral pyrite showed that quebracho does not appear to be sufficiently selective. Further consideration was given to the separation of mixtures of coal and pyrite agglomeration with heptane. 2 refs., 17 figs., 1 tab.

  17. Micromechanisms of deformation and fracture in ordered intermetallic alloys: 1, Strengthening mechanisms. [Ni/sub 3/Al and CuZn

    SciTech Connect

    Yoo, M.H.; Horton, J.A.; Liu, C.T.

    1988-07-01

    The stability and mobility of active slip and twin modes in superlattice structures, for both cubic and noncubic crystals, are theoretically investigated based on the energetics and kinetics of dislocation dissociations. The main concept of the force couplet model for the positive temperature dependence of yield and flow stresses is introduced. Two sources of the glide resistance in ordered lattices are the fault dragging mechanism and the cross-slip pinning mechanism. The effective fault energy consists of two terms related to the chemical and mechanical instability of a shear fault (antiphase boundary, superlattice intrinsic stacking fault, or microtwin). Dependence of the yield stress on the orientation and the sense of applied stress stems from the signs and magnitudes of the glide and nonglide stresses. As the effective fault energy is altered by solute segregation and/or high nonglide stress, the two glide resistance mechanisms are affected differently. In Ni/sub 3/Al and ..beta..-CuZn, the major aspects of anomalous yield strength, strain rate sensitivity, in situ deformation transmission electron microscopy observations, microtwinning, and nonstoichiometry effect are discussed in view of the present model. In addition, the order twinning-slip conjugate relationship is identified, in all the superlattice structures considered, which will influence the deformation behavior by viscous glide at high temperatures. 106 refs., 17 figs., 5 tabs.

  18. Development of on-farm oil recovery and processing methods: Final report

    SciTech Connect

    Goodrum, J.W.; Kilgo, M.B.

    1987-09-02

    Using supercritical carbon dioxide (SC-CO2), peanut oil was extracted from ground peanuts at pressures of 2000 to 10,000 psi and temperatures of 25-120/degree/ C. Above 6000 psi, increasing the temperature to the maximum possible without heavily charring the peanuts (120/degree/C) significantly increased the initial extraction rate. Increasing the pressure at constant temperature increased the rate. At higher temperatures (75/degree/ C and above) roasting began to occur, however, this was not detrimental to the extraction rate or overall oil recovery. Decreasing the particle size increases the overall yield per batch of peanuts as seen in both the half factorial and particle size experiments. Increasing the moisture increases the amount of volatiles lost. The flow rate does not affect the solubility, percent oil recovered or volatiles lost for flow rates of 40 to 60 liters CO2/minute at STP. Recovery of peanut and rapeseed oil with a combined process of partial recovery in a screw press plus extraction of the remaining oil with SC-CO2 is technically a viable alternative to other oil recovery methods. Oil recoveries of 95% (peanuts) and 75% (rapeseed) have been demonstrated. The initial extraction rate for rapeseed was consistently lower than the rate for peanuts at the same extraction temperature and pressure. No differences in SC-CO2 extraction rates or yields were found between Dwarf Essex and Cascade varieties of rapeseed. 8 refs., 17 figs., 5 tabs.

  19. Depositional and diagenetic history of a Pennsylvanian algal-mound complex: Bug and Papoose Canyon fields, Paradox basin, Utah and Colorado

    SciTech Connect

    Roylance, M.H.

    1990-07-01

    During the Middle Pennsylvanian (Desmoinesian), the Paradox basin was an enclosed, evaporitic basin consisting of a deep trough with a shallow shelf rimming its south and west side. During Desert Creek deposition, at least two large phylloid algal-mound complexes flourished on or at the edge of the shelf. One complex is now delineated by Aneth field and the other is partly delineated by Bug and Papoose Canyon fields. In the Bug-Papoose Canyon algal-mound complex of southeastern Utah and southwestern Colorado, carbonate mud mounds grew by accumulation of platy algal fragments, by baffling and trapping of fine sediment by the algae, and by precipitation of botryoidal aragonite cement between fragments. Extensive diagenesis of the accumulations began with syndepositional precipitation of botryoidal cement, inferred to have been aragonite, on phylloid algal plates, creating a topographically prominent, rigid framework containing abundant pore space. Brecciation during compaction created more pores. Parts of voids were subsequently filled by internal sediment and by calcite and gypsum cements. Finally, the algal-mound accumulations were extensively dolomitized and their porosity increased by dissolution. The relationship of these algal mounds to the Desert Creek shelf edge suggests that delineation of the shelf edge holds the promise of further discoveries of algal mounds as it is traced to the west and east of Bug and Papoose Canyon fields. 17 figs., 1 tab.

  20. Fuel savings in the heavy trucking industry through cool storage

    SciTech Connect

    Carr, P.

    1991-09-15

    Overnight idling wastes considerable amounts of fuel, contributes to noise and air pollution and adds significantly to trucker's operating costs. Costs are increased because of both the fuel wasted and the additional maintenance required on the engine as a result of extended idling. In winter, idling not only allows a resting driver to keep warm but prevents cold weather battery, fuel gelling and engine starting problems. In the summer, however, the only reason for overnight idling is to keep the sleeper compartment habitable for the resting driver and diesel engine idling to accomplish this is a massive overkill. A novel, patented, cool storage system has been developed by the Instatherm Company. This system allows comfortable summer resting conditions for the driver without having to idle the engine or having to start or run any other auxiliary engine. The operating principle is very straightforward -- store cool'' from the truck air conditioning system, while the vehicle is driven on the highway and to use this stored cool'' to air condition the sleeper compartment while the driver rests. 17 figs.

  1. Effect of rapid solidification on stainless steel weld metal microstructures and its implications on the Schaeffler diagram

    SciTech Connect

    David, S.A.; Vitek, J.M.; Reed, R.W.; Hebble, T.L.

    1987-09-01

    An investigation was carried out to determine the effect of rapid solidification on the weld metal microstructure of austenitic stainless steels and its implication on the ferrite constitution diagram. A wide variety of stainless steels were laser welded at different welding speeds and laser power levels. Results indicate that both weld pool cooling rate and the postsolidification solid state cooling rates have a profound effect on the microstructures. For the steels investigated, the microstructures ranged from duplex austenite (..gamma..) + ferrite (delta) to fully austenitic or fully ferritic. These microstructures were found to be sensitive to both cooling rates and composition. The observed results are rationalized based on rapid solidification theory. This investigation indicates that solidification rates and postsolidification cooling rates have a profound effect on the observed microstructures, thus making it impossible to predict the microstructures of rapidly cooled weld metal from the conventional constitution diagrams. The influence of the observations made in this investigation on the Schaeffler diagram is demonstrated, and possible corrections to the constitution diagram incorporating the cooling rate effects are proposed. 23 refs., 17 figs., 4 tabs.

  2. A coupled heat and water flow apparatus

    SciTech Connect

    Mohamed, A.M.O.; Caporouscio, F.; Yong, R.N. ); Cheung, C.H. ); Kjartanson, B.H. )

    1993-03-01

    Safe and permanent disposal of radioactive waste requires isolation of a number of diverse chemical elements form the environment. The Canadian Nuclear Fuel Waste Management Program is assessing the concept of disposing of waste in a vault excavated at a depth of 500 to 1000 m below the ground surface in plutonic rock of the Canadian Shield. The temperatures and hydraulic potential in the buffer and back fill material were investigated. To study the performance of a compacted buffer material under thermal and isothermal conditions, a coupled heat and water flow apparatus is designed and presented. In the preliminary design, a one-dimensional flow of heat and water was not achieved. however, control of temperature gradient, existence of one-dimensional flow, and uniformity of temperature and volumetric water content distributions at any cross section within the specimen are achieved in the modified design. Experimental results have shown that the temperature stabilizes very rapidly after a period of approximately 0. 107 days. The moisture moves away from the hot end along the longitudinal direction of the specimen due to imposed thermal gradient. The time required for moisture to stabilize is in order of days. 17 refs., 17 figs., 3 tabs.

  3. Gas-phase thermal dissociation of uranium hexafluoride: Investigation by the technique of laser-powered homogeneous pyrolysis

    SciTech Connect

    Bostick, W.D.; McCulla, W.H.; Trowbridge, L.D.

    1987-04-01

    In the gas-phase, uranium hexafluoride decomposes thermally in a quasi-unimolecular reaction to yield uranium pentafluoride and atomic fluorine. We have investigated this reaction using the relatively new technique of laser-powered homogeneous pyrolysis, in which a megawatt infrared laser is used to generate short pulses of high gas temperatures under strictly homogeneous conditions. In our investigation, SiF/sub 4/ is used as the sensitizer to absorb energy from a pulsed CO/sub 2/ laser and to transfer this energy by collisions with the reactant gas. Ethyl chloride is used as an external standard ''thermometer'' gas to permit estimation of the unimolecular reaction rate constants by a relative rate approach. When UF/sub 6/ is the reactant, CF/sub 3/Cl is used as reagent to trap atomic fluorine reaction product, forming CF/sub 4/ as a stable indicator which is easily detected by infrared spectroscopy. Using these techniques, we estimate the UF/sub 6/ unimolecular reaction rate constant near the high-pressure limit. In the Appendix, we describe a computer program, written for the IBM PC, which predicts unimolecular rate constants based on the Rice-Ramsperger-Kassel theory. Parameterization of the theoretical model is discussed, and recommendations are made for ''appropriate'' input parameters for use in predicting the gas-phase unimolecular reaction rate for UF/sub 6/ as a function of temperature and gas composition and total pressure. 85 refs., 17 figs., 14 tabs.

  4. A Novel Method of Natural Cryoprotection 1

    PubMed Central

    Hirsh, Allen G.; Williams, Robert J.; Meryman, Harold T.

    1985-01-01

    Correlating measurements from differential scanning calorimetry, freeze-fracture freeze-etch electron microscopy, and survival of twigs after two-step cooling experiments, we provide strong evidence that winter-hardened Populus balsamifera v. virginiana (Sarg.) resists the stresses of freezing below −28°C by amorphous solidification (glass formation) of most of its intracellular contents during slow cooling (≤5°C per hour). It is shown that other components of the intracellular medium go through glass transitions during slow cooling at about −45°C and below −70°C. This `three glass' model was then used to predict the results of differential scanning calorimetry, freeze-fracture freeze-etch electron microscopy, and biological experiments. This model is the first definitive explanation for the resistance of a woody plant to liquid N2 temperatures even if quench cooling (1200°C per minute) begins at temperatures as high as −20°C and warming is very slow (≤5°C per hour). It is also the first time high temperature natural intracellular glass formation has been demonstrated. Images Fig. 15 Fig. 16 Fig. 17 Fig. 18 PMID:16664400

  5. Halbach array DC motor/generator

    DOEpatents

    Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

    1998-01-06

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

  6. Thermochemical properties of gibbsite, bayerite, boehmite, diaspore, and the aluminate ion between 0 and 350/degree/C

    SciTech Connect

    Apps, J.A.; Neil, J.M.; Jun, C.H.

    1989-01-01

    A requirement for modelling the chemical behavior of groundwater in a nuclear waste repository is accurate thermodynamic data pertaining to the participating minerals and aqueous species. In particular, it is important that the thermodynamic properties of the aluminate ion be accurately determined, because most rock forming minerals in the earth's crust are aluminosilicates, and most groundwaters are neutral to slightly alkaline, where the aluminate ion is the predominant aluminum species in solution. Without a precise knowledge of the thermodynamic properties of the aluminate ion aluminosilicate mineral solubilities cannot be determined. The thermochemical properties of the aluminate ion have been determined from the solubilities of the aluminum hydroxides and oxyhydroxides in alkaline solutions between 20 and 350/degree/C. An internally consistent set of thermodynamic properties have been determined for gibbsite, boehmite, diaspore and corundum. The thermodynamic properties of bayerite have been provisionally estimated and a preliminary value for ..delta..G/sub f, 298//sup 0/ of nordstrandite has been determined. 205 refs., 17 figs., 25 tabs.

  7. Design and performance of the constructed wetland wastewater treatment system at Phillips High School, Bear Creek, Alabama

    SciTech Connect

    Not Available

    1990-05-01

    A constructed wetlands waste water treatment system has been constructed at Phillips High School, Bear Creek, Alabama, to polish the effluent from the school's extended aeration package treatment plant. The project is a demonstration of innovative technology under the Congressionally appropriated Bear Creek Floatway projects. Construction was completed in August 1988 at a cost of $36,266. Monitoring results for the period October 1988 through July 1989 reveal that the system has been very effective in polishing the effluent from the package treatment plant. The effectiveness is attributed primarily to maintenance of an overall oxidizing environment within the gravel substrate. Average monthly removals during the first year of operation exceeded 90 percent for BOD, TSS, organic nitrogen, total phosphorus, dissolved phosphorus, and fecal coliforms. Average removal percentages ranged in the 80s for ammonia and total nitrogen and in the 70s for nitrate + nitrite nitrogen and dissolved BOD. The prevalence of oxidizing conditions is probably the result of low carbonaceous demand, the low inlet hydraulic loading rate, and the combination of the shallow gravel depth and the excellent plant coverage and root depths during the first year of operation. 11 refs., 17 figs., 2 tabs.

  8. The role of <100> edge dislocations in nucleating radiation-induced colloid particles in sodium chloride

    SciTech Connect

    Teutonico, L.J.

    1982-09-01

    A theoretical program to investigate the role of dislocations in the nucleation of sodium colloids in irradiated rock salt has been outlined. As the first study in the investigation the interaction of radiation-produced defects with the <001> edge dislocation in rock salt, i.e., the edge dislocation in the principal slip system of NaCl, has been considered. The interaction potential between a symmetric defect and the <001> edge dislocation has been determined on the basis of anisotropic elasticity theory. The potential arises from the interaction between the long-range stress field of the dislocation and the displacements around the point defect. The corresponding flow lines, i.e., the lines along which the defects flow to the dislocation, have also been determined. In general, the flow lines are closed loops passing through the center of the dislocation. One of the novel features introduced by anisotropy is the possibility of open flow lines for certain elastic constant values. Along some of these open flow lines defects are attracted to the dislocation, whereas long others defects are repelled from the dislocation of common plane. 33 refs., 17 figs.

  9. Structural definition of synthetic fuels: H-coal distillates

    SciTech Connect

    Schmidt, C.E.; Perry, M.B.; White, C.M.; Gibbon, G.A.; Retcofsky, H.L.

    1986-01-01

    This work describes the progress made on a Pittsburgh Energy Technology Center research project titled ''Structural Definition of Synthetic Fuels.'' An H-Coal product consisting of a blend of ''light'' and ''heavy'' oils was distilled into 50/sup 0/F boiling cuts. Mid-boiling temperature, specific gravity, molecular weight by several techniques, refractive index, and viscosity were determined for each H-Coal distillate. Structural parameters for each 50/sup 0/F distillate cut were elucidated from nuclear magnetic resonance and low-voltage, high-resolution mass spectrometric analyses. Preparative liquid chromatography was used to obtain functionality enriched fractions of saturates, aromatics, acids, and bases from the H-Coal distillates. Several correlations have been found from these extensive data sets and are discussed and interpreted in terms of findings from previous investigations. The potential for developing mathematical models relating the aromaticity from nuclear magnetic resonance results and the structural parameter, Z, from mass spectrometry with the inspection properties of the H-Coal pseudocomponents is demonstrated. Average chemical structures for each distillate are proposed based on the analytical results. 25 refs., 17 figs., 13 tabs.

  10. HERB: A production system for programming with hierarchical expert rule bases: User's manual, HERB Version 1. 0

    SciTech Connect

    Hummel, K.E.

    1987-12-01

    Expert systems are artificial intelligence programs that solve problems requiring large amounts of heuristic knowledge, based on years of experience and tradition. Production systems are domain-independent tools that support the development of rule-based expert systems. This document describes a general purpose production system known as HERB. This system was developed to support the programming of expert systems using hierarchically structured rule bases. HERB encourages the partitioning of rules into multiple rule bases and supports the use of multiple conflict resolution strategies. Multiple rule bases can also be placed on a system stack and simultaneously searched during each interpreter cycle. Both backward and forward chaining rules are supported by HERB. The condition portion of each rule can contain both patterns, which are matched with facts in a data base, and LISP expressions, which are explicitly evaluated in the LISP environment. Properties of objects can also be stored in the HERB data base and referenced within the scope of each rule. This document serves both as an introduction to the principles of LISP-based production systems and as a user's manual for the HERB system. 6 refs., 17 figs.

  11. Sensitivity of a GCM climate simulation to differences in continental versus maritime cloud drop size

    SciTech Connect

    Kiehl, J.T.

    1994-11-20

    Extensive observations indicate a distinct difference between maritime and continental effective drop size, r{sub e}, for warm clouds. The latest version of the NCAR Community Climate Model (CCM2) is used to explore the sensitivity of differentiating between continental and maritime r{sub e} on the simulated climate. The results of this study indicate that the smaller drop size over continents leads to a reduction of surface-absorbed solar radiation from 20 to 60 W m{sup {minus}2}. This reduction in surface solar flux leads to a cooling of the continents by up to {minus}3.5 K. The reduction in surface solar flux and temperature also leads to a reduction in latent heat flux and precipitation over land. In the January simulation, there is a significant shift in tropical precipitation associated with the Australian monsoon. This shift leads to a response in the extra tropical geopotential height field over the western United States. All of these changes reduce biases in the current version of CCM2. 24 refs., 17 figs., 1 tab.

  12. Evaluation of Lower Umatilla River Channel Modifications Below Three Mile Dam, 1984 Annual Progress Report.

    SciTech Connect

    Nigro, Anthony A.; Ward, David L.

    1985-05-01

    This report summarizes results of the first year of a study initiated in September 1984 to evaluate the adequacy of channel modifications made in the lower Umatilla River to improve adult anadromous salmonid passage to Three Mile Dam (RKm 5.6), determine if fish passage or delay problems exist at Three Mile Dam and recommend site specific corrective measures if needed. Movements of steelhead (Salmo gairdneri) were monitored using mark and recapture and radio telemetry techniques. Thirty-four steelhead were marked with T-anchor tags and released in the lower river. Fifteen of those marked were also fitted with radio transmitters. Three radiotagged steelhead migrated through channel modifications to Three Mile Dam. Two of these fish migrated to the dam in less than 26 hours, but held just below the dam for 7 and 10 days before entering the ladders. The third steelhead delayed for 30 days and entered the west ladder within 24 hours of arrival at the dam. Two other radiotagged steelhead moved upstream through some of the channel modifications but did not migrate to the dam. Only one of 19 marked steelhead not fitted with transmitters was recovered at Three Mile Dam. 14 refs., 18 figs., 3 tabs.

  13. Description of the Northwest hazardous waste site data base and preliminary analysis of site characteristics

    SciTech Connect

    Woodruff, D.L.; Hartz, K.E.; Triplett, M.B.

    1988-08-01

    The Northwest Hazardous Waste RD and D Center (the Center) conducts research, development, and demonstration (RD and D) activities for hazardous and radioactive mixed-waste technologies applicable to remediating sites in the states of Idaho, Montana, Oregon, and Washington. To properly set priorities for these RD and D activities and to target development efforts it is necessary to understand the nature of the sites requiring remediation. A data base of hazardous waste site characteristics has been constructed to facilitate this analysis. The data base used data from EPA's Region X Comprehensive Environmental Response, Compensation, and Liability Information System (CERCLIS) and from Preliminary Assessment/Site Investigation (PA/SI) forms for sites in Montana. The Center's data base focuses on two sets of sites--those on the National Priorities List (NPL) and other sites that are denoted as ''active'' CERCLIS sites. Active CERCLIS sites are those sites that are undergoing active investigation and analysis. The data base contains information for each site covering site identification and location, type of industry associated with the site, waste categories present (e.g., heavy metals, pesticides, etc.), methods of disposal (e.g., tanks, drums, land, etc.), waste forms (e.g., liquid, solid, etc.), and hazard targets (e.g., surface water, groundwater, etc.). As part of this analysis, the Northwest region was divided into three geographic subregions to identify differences in disposal site characteristics within the Northwest. 2 refs., 18 figs., 5 tabs.

  14. Automated microscopy methods for measuring pyritic sulfur content of coal and determining degree of liberation of pyrite in coal: Final report

    SciTech Connect

    Chaparro, L.F.

    1987-07-25

    The objective of this project is to develop an automated procedure, to be implemented in an IBAS image analyzer, to determine size, shape and degree of liberation of pyrite particles in a coal matrix. This procedure is to work in real time conditions and with minimal intervention from the operator. Our approach is to create from the original microscopic image a three level image with the following components: epoxy, coal macerals and pyrite to simplify the calculations. Enhancing the original image by histogram scaling and median filtering, we segment it and form the three level image. After the boundaries of the pyrite particles are defined, we mask the surroundings of the particle to estimate the degree of liberation. The percentage of epoxy included in the mask is defined as the degree of liberation of the particle. Size and shape factor values are simultaneously calculated for each of the analyzed particles. These particles are classified according to their maximum diameter, shape factor and degree of liberation by the program. 6 refs., 18 figs.

  15. Diesel fuel detergent additive performance and assessment

    SciTech Connect

    Vincent, M.W.; Papachristos, M.J.; Williams, D.; Burton, J.

    1994-10-01

    Diesel fuel detergent additives are increasingly linked with high quality automotive diesel fuels. Both in Europe and in the USA, field problems associated with fuel injector coking or fouling have been experienced. In Europe indirect injection (IDI) light duty engines used in passenger cars were affected, while in the USA, a direct injection (DI) engine in heavy duty truck applications experienced field problems. In both cases, a fuel additive detergent performance test has evolved using an engine linked with the original field problem, although engine design modifications employed by the manufacturers have ensured improved operation in service. Increasing awareness of the potential for injector nozzle coking to cause deterioration in engine performance is coupled with a need to meet ever more stringent exhaust emissions legislation. These two requirements indicate that the use of detergency additives will continue to be associated with high quality diesel fuels. The paper examines detergency performance evaluated in a range of IDI and DI engines and correlates performance in the two most widely recognised test engines, namely the Peugeot 1.9 litre IDI, and Cummins L10 DI engines. 17 refs., 18 figs., 5 tabs.

  16. R D for the storage, transport, and handling of coal-based fuels

    SciTech Connect

    Not Available

    1990-01-01

    The product of several advanced physical coal cleaning processes is a dry, ultrafine coal (DUC), in the order of 10 microns mean mass diameter. Environmentally safe systems must be provided for the storage, transport, and handling of this fuel. The objective of the project is the development of total logistics systems for DUC, including experimental verification of key features. The systems to be developed will provide for safe, economic, and environmentally protective storage and delivery of DUC for residential, commercial, and industrial uses. Work this quarter entailed: obtaining all of the test coals including 10 lbs of Illinois No. 6 cleaned by the LICADO process. Installation of the test system for the Residential Storage Tank including piping and the components required to recycle the ultrafine coal. Completion of the design of the scale model test of the Industrial/Commercial Storage System. Piping and supports for the porous fluidization plates in the floor of the tanks have been completed. Preliminary results with the Illinois No. 6 coal cleaned by the Bechtel heptane/asphalt process indicate that this material is cohesive and difficult to fluidize. Studies of dune formation have been made with the Illinois No. 6 coal. These data provide information on the minimum velocity which will transport the particles. 11 refs., 18 figs.

  17. Spin-mapping of coal structures with ESE and ENDOR

    SciTech Connect

    Belford, R.L.; Clarkson, R.B.

    1989-09-01

    The broad goals of this project are to determine by nondestructive means -- magnetic resonance techniques -- aspects of chemical and physical structures of organic parts of native and treated coals. We also hope to use related methods to follow the course of certain coal cleaning processes with microscopic spatial resolution. Specific goals include: the nondestructive determination of atomic and molecular structure of sulfur-containing organic species in coal both in its natural state and at various stages during desulfurization; determination of interatomic distances, numbers, and orientations in individual macerals with differing sulfur content by pulsed EPR microscopy; development of nondestructive high-resolution microscopic images of internal structure in coal, including chemical information on the location and distribution of sulfur-containing compounds; determination of sulfur compound chemical structure from highly localized regions in a whole coal sample; by means of the techniques used to accomplish the above goals, to measure the effects of various coal cleaning methods on the molecular forms and spatial distribution of organic sulfur, and on internal structural characteristics like pore size and maceral density; following by these microscopic methods the rate and extent of solvent intrusion into the pores and matrix of whole coals and separated macerals. The work carried out this year mainly addressed goals 1, 2, 3, and 6. 24 refs., 18 figs.

  18. Salt Repository Project shaft design guide: Revision 0

    SciTech Connect

    Not Available

    1987-12-01

    The Salt Repository Project (SRP) Shaft Design Guide (SDG) and the accompanying SRP Input to Seismic Design define the basic approach for developing appropriate shaft designs for a high-level nuclear waste repository in salt at a proposed site in Deaf Smith County, Texas. The SDG is based on current mining industry standards and practices enhanced to meet the special needs of an underground nuclear waste repository. It provides a common approach for design of both the exploratory and repository shafts. The SDG defines shaft lining and material concepts and presents methods for calculating the loads and displacements that will be imposed on lining structures. It also presents the methodology and formulae for sizing lining components. The SDG directs the shaft designer to sources of geoscience and seismic design data for the Deaf Smith County, Texas repository site. In addition, the SDG describes methods for confirming shaft lining design by means of computer analysis, and it discusses performance monitoring needs that must be considered in the design. 113 refs., 18 figs., 14 tabs.

  19. Arctic ice shelves and ice islands: Origin, growth and disintegration, physical characteristics, structural-stratigraphic variability, and dynamics

    SciTech Connect

    Jeffries, M.O. )

    1992-08-01

    Ice shelves are thick, floating ice masses most often associated with Antarctica where they are seaward extensions of the grounded Antarctic ice sheet and sources of many icebergs. However, there are also ice shelves in the Arctic, primarily located along the north coast of Ellesmere Island in the Canadian High Arctic. The only ice shelves in North America and the most extensive in the north polar region, the Ellesmere ice shelves originate from glaciers and from sea ice and are the source of ice islands, the tabular icebergs of the Arctic Ocean. The present state of knowledge and understanding of these ice features is summarized in this paper. It includes historical background to the discovery and early study of ice shelves and ice islands, including the use of ice islands as floating laboratories for polar geophysical research. Growth mechanisms and age, the former extent and the twentieth century disintegration of the Ellesmere ice shelves, and the processes and mechanisms of ice island calving are summarized. Surface features, thickness, thermal regime, and the size, shape, and numbers of ice islands are discussed. The structural-stratigraphic variability of ice islands and ice shelves and the complex nature of their growth and development are described. Large-scale and small-scale dynamics of ice islands are described, and the results of modeling their drift and recurrence intervals are presented. The conclusion identifies some unanswered questions and future research opportunities and needs. 97 refs., 18 figs.

  20. Lightweight extendable and retractable pole

    DOEpatents

    Warren, J.L.; Brandt, J.E.

    1994-08-02

    A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole. 18 figs.

  1. Method and apparatus for powering an electrodeless lamp with reduced radio frequency interference

    DOEpatents

    Simpson, J.E.

    1999-06-08

    An electrodeless lamp waveguide structure includes tuned absorbers for spurious RF signals. A lamp waveguide with an integral frequency selective attenuation includes resonant absorbers positioned within the waveguide to absorb spurious out-of-band RF energy. The absorbers have a negligible effect on energy at the selected frequency used to excite plasma in the lamp. In a first embodiment, one or more thin slabs of lossy magnetic material are affixed to the sidewalls of the waveguide at approximately one quarter wavelength of the spurious signal from an end wall of the waveguide. The positioning of the lossy material optimizes absorption of power from the spurious signal. In a second embodiment, one or more thin slabs of lossy magnetic material are used in conjunction with band rejection waveguide filter elements. In a third embodiment, one or more microstrip filter elements are tuned to the frequency of the spurious signal and positioned within the waveguide to couple and absorb the spurious signal's energy. All three embodiments absorb negligible energy at the selected frequency and so do not significantly diminish the energy efficiency of the lamp. 18 figs.

  2. Health effects models for nuclear power plant accident consequence analysis: Low LET radiation

    SciTech Connect

    Evans, J.S. . School of Public Health)

    1990-01-01

    This report describes dose-response models intended to be used in estimating the radiological health effects of nuclear power plant accidents. Models of early and continuing effects, cancers and thyroid nodules, and genetic effects are provided. Weibull dose-response functions are recommended for evaluating the risks of early and continuing health effects. Three potentially lethal early effects -- the hematopoietic, pulmonary, and gastrointestinal syndromes -- are considered. In addition, models are included for assessing the risks of several nonlethal early and continuing effects -- including prodromal vomiting and diarrhea, hypothyroidism and radiation thyroiditis, skin burns, reproductive effects, and pregnancy losses. Linear and linear-quadratic models are recommended for estimating cancer risks. Parameters are given for analyzing the risks of seven types of cancer in adults -- leukemia, bone, lung, breast, gastrointestinal, thyroid, and other.'' The category, other'' cancers, is intended to reflect the combined risks of multiple myeloma, lymphoma, and cancers of the bladder, kidney, brain, ovary, uterus and cervix. Models of childhood cancers due to in utero exposure are also developed. For most cancers, both incidence and mortality are addressed. The models of cancer risk are derived largely from information summarized in BEIR III -- with some adjustment to reflect more recent studies. 64 refs., 18 figs., 46 tabs.

  3. Repeat sequence chromosome specific nucleic acid probes and methods of preparing and using

    DOEpatents

    Weier, H.U.G.; Gray, J.W.

    1995-06-27

    A primer directed DNA amplification method to isolate efficiently chromosome-specific repeated DNA wherein degenerate oligonucleotide primers are used is disclosed. The probes produced are a heterogeneous mixture that can be used with blocking DNA as a chromosome-specific staining reagent, and/or the elements of the mixture can be screened for high specificity, size and/or high degree of repetition among other parameters. The degenerate primers are sets of primers that vary in sequence but are substantially complementary to highly repeated nucleic acid sequences, preferably clustered within the template DNA, for example, pericentromeric alpha satellite repeat sequences. The template DNA is preferably chromosome-specific. Exemplary primers and probes are disclosed. The probes of this invention can be used to determine the number of chromosomes of a specific type in metaphase spreads, in germ line and/or somatic cell interphase nuclei, micronuclei and/or in tissue sections. Also provided is a method to select arbitrarily repeat sequence probes that can be screened for chromosome-specificity. 18 figs.

  4. X-ray laser related experiments and theory at Princeton

    SciTech Connect

    Suckewer, S.

    1989-04-01

    This paper describes a new system for the development of an x-ray laser in the wavelength region from 5 nm to 1 nm utilizing a Powerful Sub-Picosecond Laser (PP-Laser) of expected peak power up to 0.5 TW in a 300 fs pulse. Soft x-ray spectra generated by the interaction of the PP-Laser beam with different targets are presented and compared to the spectra generated by a much less intense laser beam (20--30 GW). A theoretical model for the interaction of atoms with such a strong laser EM field is also briefly discussed. The development of additional amplifiers for the recombining soft x-ray laser and the design of a cavity are presented from the point of view of applications for x-ray microscopy and microlithography. This overview concludes with the presentation of recent results on the quenching of spontaneous emission radiation and its possible effect on the absolute intensity calibration of soft x-ray spectrometers. 26 refs., 18 figs.

  5. User interface in ORACLE for the Worldwide Household Goods Information System for Transportation Modernization (WHIST-MOD)

    SciTech Connect

    James, T. ); Loftis, J. )

    1990-07-01

    The Directorate of Personal Property of the Military Traffic Management Command (MTMC) requested that Oak Ridge National laboratory (ORNL) design a prototype decision support system, the Worldwide Household Goods Information System for Transportation Modernization (WHIST-MOD). This decision support system will automate current tasks and provide analysis tools for evaluating the Personal Property Program, predicting impacts to the program, and planning modifications to the program to meet the evolving needs of military service members and the transportation industry. The system designed by ORNL consists of three application modules: system dictionary applications, data acquisition and administration applications, and user applications. The development of the user applications module is divided into two phases. Round 1 is the data selection front-end interface, and Round 2 is the output or back-end interface. This report describes the prototyped front-end interface for the user application module. It discusses user requirements and the prototype design. The information contained in this report is the product of in-depth interviews with MTMC staff, prototype meetings with the users, and the research and design work conducted at ORNL. 18 figs., 2 tabs.

  6. Sea otter abundance, distribution, and pup production in Prince William Sound following the Exxon Valdez oil spill

    SciTech Connect

    Johnson, C.B.; Garshelis, D.L.

    1995-12-31

    The authors investigated effects of the 1989 Exxon Valdez oil spill on the abundance, distribution, and pup production of sea otters (Enhydra lutris) in prince William Sound (PWS) by comparing counts made during 1990 and 1991 with counts made by researchers 5--12 years before the spill. The authors observed no evidence of avoidance or attraction to spill-affected shorelines 1--2 years after the spill. Despite a substantial loss of sea otters immediately following the spill, the authors counted fewer otters than prespill investigators at only one of three heavily oiled islands, and from 1990 to 1991 the counts at this one site increased to a level equivalent to the latest (1985) prespill count. The authors followed the methods of prespill investigators and found close agreement between the counts of otters and those of two other concurrent investigations using the same survey technique. This agreement among counts, and the involvement in counts made prespill, suggested that inter-observer variability could not explain the unexpected high counts at oiled sites. 52 refs., 18 figs., 5 tabs.

  7. High-performance, extrusion-cast explosives with low sensitivity: Interim report No. 2

    SciTech Connect

    Scribner, K.J.; von Holtz, E.; Simpson, R.L.

    1989-01-10

    Lawrence Livermore National Laboratory (LLNL) has developed a class of explosives having both high performance for modern precision munitions and greater safety for reduced vulnerability of launch platforms (ships, planes, ammunition storage sites) to enemy fire or accidents. Known as extrusion-cast explosives (ECXs), they have demonstrated performance levels equivalent to the most powerful now available, but test results indicate they are far less sensitive than the conventional high-energy explosives. Specifically, in a sympathetic-detonation test, ECX that was immediately adjacent to a deliberately-detonated donor charge did not detonate in two of three tests, whereas Comp B did detonate sympathetically in this test. Also, this ECX provided performance equivalent to that of the high-performance explosive LX-14, when tested in the TOW (tube-launched, optically-sighted, wire-guided) missile. This report describes the performance, vulnerability, and processing (at this stage of development) of this class of explosives. 9 refs., 18 figs., 11 tabs.

  8. Mitigation of bird collisions with transmission lines: Final report

    SciTech Connect

    Beaulaurier, D.L.

    1981-09-11

    In this study removal of overhead groundwires was evaluated as a technique for mitigating bird collisions with transmission lines. Groundwires were removed by BPA from a 500 kV double circuit line at Bybee Lake in Portland, Oregon. Earlier studies at these sites had documented small but measurable collision rates (i.e., No. collisions/No. flights) attributed primarily to collisions with groundwires. Observations of bird flights and searches for dead birds in the vicinity of the lines constituted the primary methods of data collection during pre- and post-removal studies. Field work was conducted from October 1980 through March 1981. A total of seven dead birds and eight feather spots were found after groundwire removal. Species found were green-winged teal, pintail, greater scaup, American wigeon, glaucous-winged gull, starling, red-winged blackbird and song sparrow. No collisions with transmission lines were observed. During pre-removal studies at these two sites, a total of 53 dead birds and 22 feather spots were found over two years of study. It was necessary to document flight intensity (No. flights/day) during pre- and post-removal studies, in order to determine if the number of dead birds found changed because of groundwire removal or simply because of changes in flight intensity. 41 refs., 18 figs., 22 tabs.

  9. Solid propellant flame structure

    SciTech Connect

    Parr, T.P.; Hanson-Parr, D.M.

    1996-07-01

    Planar Laser Induced Fluorescence (PLIF), UV/Vis Absorption, and thermocouple measurements were done for HNF, RDX, HMX, and XM39 deflagration with and without CO{sub 2} laser-support. RDX and especially HNF have very short self-deflagration flame length scales. HMX and XM39 have taller self-deflagration flames. XM39 has a marked dark zone with plateau temperature about 1,400 K. RDX`s dark zone, present under laser supported deflagration, collapses when the external laser flux is removed. PLIF was used to measure the 2D NH, OH, and CN species profiles for these materials and OH temperature profile for RDX and HNF under non-laser supported conditions. The best spatial resolution for the RDX PLIF was about 4 {micro}m. Sandwiches of HNF and various binders were studied with PLIF and while obvious diffusion flames were present at low pressure, they are weak and are not expected to be burn rate controlling. 34 refs., 18 figs.

  10. Modular hydropower demonstration

    SciTech Connect

    Not Available

    1988-09-01

    The modular approach has been developed for the construction of small hydro projects in order to reduce the costs and to shorten procurement and construction schedules that occur when designs and equipment selection more applicable to large projects are used. The modular approach aims to maximize the use of ''off-the-shelf'' and readily available components. A key feature is the replacement of the conventional purpose-designed hydroelectric turbine by a pump used in reverse as a turbine with fixed blades and vanes. Other features are the use of siphon penstocks, induction generators, prefabricated structures, and automated control equipment. The New York State Energy Research and Development Authority contracted with Acres International Corporation to study two small hydro projects designed and built using the modular approach, and compare each one with an equivalent conventional design. Equipment procurement and installation costs, general construction costs, and energy production were estimated. Economic analyses were prepared. Preliminary data on operation and maintenance was recorded. The methodology and results of the study are contained in this report. 18 figs., 20 tabs.

  11. Coal liquefaction process streams characterization and evaluation

    SciTech Connect

    Robbins, G.A.; Winshel, R.A.; Burke, F.P.

    1990-10-01

    Consol R D is conducting a three-year program to characterize process and product streams from direct coal liquefaction process development projects. The program objectives are two-fold: (1) to obtain and provide appropriate samples of coal liquids for the evaluation of analytical methodology, and (2) to support ongoing DOE-sponsored coal liquefaction process development efforts. The first objective will utilize analytical techniques which have not been fully demonstrated; the second objective involves more previously proven methods. This quarter, two feed coals and 39 process oils from Wilsonville Run 258 were analyzed to provide information on process performance. Run 258 was operated in the thermal/catalytic Close-Coupled Integrated Two-Stage Liquefaction (CC-ITSL) mode with ash recycle. The subbituminous feed coals were from the Spring Creek Mine (Anderson and Dietz seams) and from the Black Thunder Mine (Wyodak and Anderson seams). Shell 324 catalyst was used in the second stage. Various coal samples related to Wilsonville Run 259 were analyzed for chemical and petrographic composition. These results will be given in a future report, which covers all of Run 259. 18 figs., 24 tabs.

  12. Design guidelines and procedures for guided horizontal drilling

    SciTech Connect

    Kirby, M.J.; Kramer, S.R.; Pittard, G.T.; Mamoun, M.

    1996-08-01

    Jason Consultants International, Inc., under the sponsorship of the Gas Research Institute (GRI), has developed guidelines, procedures and software, which are described in this paper, for the installation of polyethylene gas pipe using guided horizontal drilling. Jason was aided in this development by two key subcontractors; Maurer Engineering who wrote the software and NICOR Technologies who reviewed the software and guidelines from a utility perspective. This program resulted in the development of commerically viable software for utilities, contractors, engineering firms, and others involved with the installation of pipes using guided horizontal drilling. The software is an interactive design tool that allows the user to enter ground elevation data, alignment information and pipe data. The software aides the engineer in designing a drill path and provides plan and profile views along with tabular data for pipe depth and surface profile. Finally, the software calculates installation loads and pipe stresses, compares these values against pipe manufacturer`s recommendations, and provides this information graphically and in tabular form. 5 refs., 18 figs., 2 tabs.

  13. Paleoclimatic controls on sedimentation, diagnesis, and reservior quality: Lessons from Miocene carbonates

    SciTech Connect

    Sun, S.Q. ); Esteban, M. )

    1994-04-01

    Miocene carbonates worldwide were deposited in a wide range of paleogeographic and tectonic settings and form important reservoirs in several regions. The reservoir quality of these carbonates appears to have been primarily controlled by the prevailing paleoclimate, which exerted a major control of both the depositional patterns and diagenetic pathways. Two end members are discussed here: (1) humid, oceanic tropical-subtropical settings, and (2) arid, land-locked temperate-subtropical settings. In humid, oceanic tropical-subtropical settings (e.g., Miocene of Southeast Asia), a warming trend paralleled by generally rising sea level allowed thick coral reefs and skeletal banks to develop, most of which are seismically resolvable. These carbonates typically represent several stages or cycles of development (largely third-order) separated by discontinuities in platform growth with episodic subaerial exposure. Development of economic reservoirs is mainly related to relative sea level falls and associated meteoric diagenesis. Trends and patterns of reservoir distribution can be predicted within a sequence stratigraphic framework. Basal transgressive carbonates are mostly tight because of their relatively fine-grained textures, intense compaction, and isolation from meteoric water influence. Best reservoir quality is commonly developed beneath subaerial unconformities in highstand buildups where effect of meteoric water leaching and karstification are most intense. 80 refs., 18 figs., 1 tab.

  14. Late paleozoic tectonic amalgamation of northwestern China. Sedimentary record of the northern Tarim, northwestern Turpan, and southern Junggar basins

    SciTech Connect

    Carroll, A.R.; Graham, S.A.; Hendrix, M.S.; Ying, D.; Zhou, D.

    1995-05-01

    This study focuses on areas adjacent to the Tian Shan (shan is Chinese for mountains) in Xinjiang Uygur Autonomous Region, northwestern China, and provides new field data on Carboniferous and Permian outcrop exposures of sedimentary rocks of the southern Junggar, northwestern Turpan, and northern Tarim basins that bear directly on the history of late Paleozoic tectonic amalgamation. We present here a multifaceted sedimentary basin analysis, including sedimentary facies, paleocurrent, and sandstone provenance analyses, and reconstructions of late Paleozoic basin subsidence. These data provide a unique record not only of the basins themselves, but also of the evolution of the adjacent orogenic belts. This study is based on fieldwork during the summers of 1987, 1988, 1991, and 1992 by workers from Stanford University, the Chinese Academy of Geological Sciences, and the Xinjiang Bureau of Geology and Mineral Resources. Although reconnaissance in nature, the data presented here provide a basis for evaluating alternative hypotheses for the evolution of northwestern China and provide a starting point for more comprehensive future studies. 72 refs., 18 figs., 1 tab.

  15. High resolution amorphous silicon radiation detectors

    DOEpatents

    Street, R.A.; Kaplan, S.N.; Perez-Mendez, V.

    1992-05-26

    A radiation detector employing amorphous Si:H cells in an array with each detector cell having at least three contiguous layers (n-type, intrinsic, p-type), positioned between two electrodes to which a bias voltage is applied. An energy conversion layer atop the silicon cells intercepts incident radiation and converts radiation energy to light energy of a wavelength to which the silicon cells are responsive. A read-out device, positioned proximate to each detector element in an array allows each such element to be interrogated independently to determine whether radiation has been detected in that cell. The energy conversion material may be a layer of luminescent material having a columnar structure. In one embodiment a column of luminescent material detects the passage therethrough of radiation to be detected and directs a light beam signal to an adjacent a-Si:H film so that detection may be confined to one or more such cells in the array. One or both electrodes may have a comb structure, and the teeth of each electrode comb may be interdigitated for capacitance reduction. The amorphous Si:H film may be replaced by an amorphous Si:Ge:H film in which up to 40 percent of the amorphous material is Ge. Two dimensional arrays may be used in X-ray imaging, CT scanning, crystallography, high energy physics beam tracking, nuclear medicine cameras and autoradiography. 18 figs.

  16. Nuclear research emulsion neutron spectrometry at the Little-Boy replica

    SciTech Connect

    Gold, R.; Roberts, J.H.; Preston, C.C.

    1985-10-01

    Nuclear research emulsions (NRE) have been used to characterize the neutron spectrum emitted by the Little-Boy replica. NRE were irradiated at the Little-Boy surface as well as approximately 2 m from the center of the Little-Boy replica using polar angles of 0/sup 0/, 30/sup 0/, 60/sup 0/ and 90/sup 0/. For the NRE exposed at 2 m, neutron background was determined using shadow shields of borated polyethylene. Emulsion scanning to date has concentrated exclusively on the 2-m, 0/sup 0/ and 2-m, 90/sup 0/ locations. Approximately 5000 proton-recoil tracks have been measured in NRE irradiated at each of these locations. Neutron spectra obtained from these NRE proton-recoil spectra are compared with both liquid scintillator neutron spectrometry and Monte Carlo calculations. NRE and liquid scintillator neutron spectra generally agree within experimental uncertainties at the 2-m, 90/sup 0/ location. However, at the 2-m, 0/sup 0/ location, the neutron spectra derived from these two independent experimental methods differ significantly. NRE spectra and Monte Carlo calculations exhibit general agreement with regard to both intensity as well as energy dependence. Better agreement is attained between theory and experiment at the 2-m, 90/sup 0/ location, where the neutron intensity is considerably higher. 14 refs., 18 figs., 11 tabs.

  17. A new species of the genus Hermanella Needham & Murphy (Ephemeroptera: Leptophlebiidae) from Northeastern Brazil.

    PubMed

    Almeida, Everlin; Costa, Sabrina; Mariano, Rodolfo

    2016-01-01

    Hermanella angeli sp. nov. (Holotype male deposited in MZUSP: Itacaré municipality, Cachoeira Bom Sossego, 14°20'05.2"S, 39°01'27.4"W, 31.VII.2012, Mariano, R, Almeida, E & Costa, S. leg.) is described based on imagos and nymphs from the State of Bahia, Brazil. The new species can be distinguished by the following combination of characteristics, in male imagos: (1) costal and subcostal area of forewing brown (Fig. 5b); (2) thorax and abdominal terga predominantly brown (Fig. 2-3); (3) penes divided in apical 1/8 (Fig. 8); (4) penis lobe with ventral, long, curved spine (Fig. 7); (5) prosternum narrow (Fig. 1). In nymphs: (1) tarsal claws with 2-3 accessory denticles (Fig. 19); (2) mandible without setae near basal articulation (Fig. 13a); (3) prostheca of left mandible with spines on inner margin (Fig. 13b); (4) plate-like gills terminated in a finger-like process (Fig. 11). PMID:27395966

  18. Nucleic acid detection methods

    DOEpatents

    Smith, C.L.; Yaar, R.; Szafranski, P.; Cantor, C.R.

    1998-05-19

    The invention relates to methods for rapidly determining the sequence and/or length a target sequence. The target sequence may be a series of known or unknown repeat sequences which are hybridized to an array of probes. The hybridized array is digested with a single-strand nuclease and free 3{prime}-hydroxyl groups extended with a nucleic acid polymerase. Nuclease cleaved heteroduplexes can be easily distinguish from nuclease uncleaved heteroduplexes by differential labeling. Probes and target can be differentially labeled with detectable labels. Matched target can be detected by cleaving resulting loops from the hybridized target and creating free 3-hydroxyl groups. These groups are recognized and extended by polymerases added into the reaction system which also adds or releases one label into solution. Analysis of the resulting products using either solid phase or solution. These methods can be used to detect characteristic nucleic acid sequences, to determine target sequence and to screen for genetic defects and disorders. Assays can be conducted on solid surfaces allowing for multiple reactions to be conducted in parallel and, if desired, automated. 18 figs.

  19. Global climate change and the mitigation challenge

    SciTech Connect

    Frank Princiotta

    2009-10-15

    Anthropogenic emissions of greenhouse gases, especially carbon dioxide (CO{sub 2}), have led to increasing atmospheric concentrations, very likely the primary cause of the 0.8{sup o}C warming the Earth has experienced since the Industrial Revolution. With industrial activity and population expected to increase for the rest of the century, large increases in greenhouse gas emissions are projected, with substantial global additional warming predicted. This paper examines forces driving CO{sub 2} emissions, a concise sector-by-sector summary of mitigation options, and research and development (R&D) priorities. To constrain warming to below approximately 2.5{sup o}C in 2100, the recent annual 3% CO{sub 2} emission growth rate needs to transform rapidly to an annual decrease rate of from 1 to 3% for decades. Furthermore, the current generation of energy generation and end-use technologies are capable of achieving less than half of the emission reduction needed for such a major mitigation program. New technologies will have to be developed and deployed at a rapid rate, especially for the key power generation and transportation sectors. Current energy technology research, development, demonstration, and deployment (RDD&D) programs fall far short of what is required. 20 refs., 18 figs., 4 tabs.

  20. Sequence stratigraphy of the lower Ordovician Prairie du Chien Group on the Wisconsin arch and in the Michigan basin

    SciTech Connect

    Smith, G.L. ); Byers, C.W.; Dott, R.H. Jr. )

    1993-01-01

    Mixed carbonate-siliciclastic sediments of the Prairie du Chien Group were largely deposited in shallow tropical seas. Sedimentologic indices of shallow-water deposition and a moderately diverse Early Ordovician macrofauna and mid-continent conodont fauna indicate that shallow-marine conditions prevailed across the Wisconsin arch and Michigan basin throughout most of Prairie du Chien deposition. Although the Wisconsin arch and Michigan basin were weakly active structural features, tectonism does not appear to have appreciably influenced water depths. The Michigan basin was not a bathymetric basin during the Early Ordovician as it became during the Silurian. The Prairie du Chien Group contains two major depositional sequences, the Oneota and Shakopee formations, both of which are bounded by type 1 sequence boundaries. On the Wisconsin arch, type 1 sequence boundaries are associated with karsting and silicification of underlying carbonates, indicating unconformity development during prolonged subaerial exposure. In the central Michigan basin, formation contacts are sharp and appear disconformable. The contacts between the two lithostratigraphic members comprising each formation in outcrop do not appear to be subaerial unconformities and are interpreted as type 2 sequence boundaries. 87 refs., 18 figs.

  1. Natural Phenomena Hazards Modeling Project: Flood hazard models for Department of Energy sites

    SciTech Connect

    Savy, J.B.; Murray, R.C.

    1988-05-01

    For eight sites, the evaluation of flood hazards was considered in two steps. First, a screening assessment was performed to determine whether flood hazards may impact DOE operations. The screening analysis consisted of a preliminary flood hazard assessment that provides an initial estimate of the site design basis. The second step involves a review of the vulnerability of on-site facilities by the site manager; based on the results of the preliminary flood hazard assessment and a review of site operations, the manager can decide whether flood hazards should be considered a part of the design basis. The scope of the preliminary flood hazard analysis was restricted to evaluating the flood hazards that may exist in proximity to a site. The analysis does not involve an assessment of the potential of encroachment of flooding at specific on-site locations. Furthermore, the screening analysis does not consider localized flooding at a site due to precipitation (i.e., local run-off, storm sewer capacity, roof drainage). These issues were reserved for consideration by the DOE site manager. 9 refs., 18 figs.

  2. Runoff and sediment yield model for predicting nuclide transport in watersheds using BIOTRAN

    SciTech Connect

    Gallegos, A.F.; Wenzel, W.J.

    1990-09-01

    The environmental risk simulation model BIOTRAN was interfaced with a series of new subroutines (RUNOFF, GEOFLX, EROSON, and AQUIFER) to predict the movement of nuclides, elements, and pertinent chemical compounds in association with sediments through lateral and channel flow of runoff water. In addition, the movement of water into and out of segmented portions of runoff channels was modeled to simulate the dynamics of moisture flow through specified aquifers within the watershed. The BIOTRAN soil water flux subroutine, WATFLX, was modified to interface the relationships found in the SPUR model for runoff and sediment transport into channels with the particle sorting relationships to predict radionuclide enrichment and movement in watersheds. The new subroutines were applied specifically to Mortandad Canyon within Los Alamos National Laboratory by simultaneous simulation of eight surface vegetational subdivisions and associated channel and aquifer segments of this watershed. This report focuses on descriptions of the construction and rationale for the new subroutines and on discussing both input characteristics and output relationships to known runoff events from Mortandad Canyon. Limitations of the simplified input on model behavior are also discussed. Uranium-238 was selected as the nuclide for demonstration of the model because it could be assumed to be homogeneously distributed over the watershed surface. 22 refs., 18 figs., 9 tabs.

  3. The Beam Break-Up Numerical Simulator

    SciTech Connect

    Travish, G.A.

    1989-11-01

    Beam Break-Up (BBU) is a severe constraint in accelerator design, limiting beam current and quality. The control of BBU has become the focus of much research in the design of the next generation collider, recirculating and linear induction accelerators and advanced accelerators. Determining the effect on BBU of modifications to cavities, the focusing elements or the beam is frequently beyond the ability of current analytic models. A computer code was written to address this problem. The Beam Break-Up Numerical Simulator (BBUNS) was designed to numerically solve for beam break-up (BBU) due to an arbitrary transverse wakefield. BBUNS was developed to be as user friendly as possible on the Cray computer series. The user is able to control all aspects of input and output by using a single command file. In addition, the wakefield is specified by the user and read in as a table. The program can model energy variations along and within the beam, focusing magnetic field profiles can be specified, and the graphical output can be tailored. In this note we discuss BBUNS, its structure and application. Included are detailed instructions, examples and a sample session of BBUNS. This program is available for distribution. 50 refs., 18 figs., 5 tabs.

  4. Filtering apparatus

    DOEpatents

    Haldipur, G.B.; Dilmore, W.J.

    1992-09-01

    A vertical vessel is described having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas. 18 figs.

  5. Benchmark study of the I-DYNEV evacuation time estimate computer code

    SciTech Connect

    Urbanik, T. II; Moeller, M.P.; Barnes, K.

    1988-06-01

    This report compares observed vehicle movement on a highway network during periods of peak computer traffic with a simulation of the traffic flow made with the I-DYNEV computer model. The purpose of the comparison is to detemine if the model can accurately simulate the patterns of vehicular movement and delay during congested commuter traffic. The results indicate that the I-DYNEV model adequately simulates the pattens of vehicular movement and delay associated with an evacuation, provided that the model's capacity reduction factor is an input parameter. The current I-DYNEV model automatically reduces capacity by 15% of input capacity to account for congestion-induced losses in capacity reduction due to congestion, the model underestimated capacity during congestion. Therefore, the use of a capacity reduction factor should be a decision made by the analysts, not the model. When I-DYNEV was used with a capacity reduction factor appropriate to the data set used (i.e., no reduction in capacity), I-DYNEV produced reasonable results. 3 refs., 18 figs., 3 tabs.

  6. Evaluation of charged-particle reactions for fusion applications

    SciTech Connect

    White, R.M.; Resler, D.A.; Warshaw, S.I.

    1991-01-01

    New evaluations of the total reaction cross sections for {sup 2}H(d,n){sup 3}He, {sup 2}H(d,p){sup 3}H, {sup 3}H(t,2n){sup 4}He,{sup 3}H(d,n){sup 4}He, and {sup 3}He(d,p){sup 4}He have been completed. These evaluations are based on all known published data from 1946 to 1990 and include over 1150 measured data points from 67 references. The purpose of this work is to provide a consistent and well-documented set of cross sections for use in calculations relating to fusion energy research. A new thermonuclear data file, TDF, and a library of FORTRAN subprograms to read the file have been developed. Calculated from the new evaluations, the TDF file contains information on the Maxwellian-averaged reaction rates as a function of reaction and plasma temperature and the Maxwellian-averaged average energy of the interacting particles and reaction products. Routines are included that provide thermally-broadened spectral information for the secondary reaction products. 67 refs., 18 figs.

  7. Performance testing of radiobioassay laboratories: In vivo measurements, Final Report

    SciTech Connect

    MacLellan, J.A.; Traub, R.J.; Olsen, P.C.

    1990-04-01

    A study of two rounds of in vivo laboratory performance testing was undertaken by Pacific Northwest Laboratory (PNL) to determine the appropriateness of the in vivo performance criteria of draft American National Standards Institute (ANSI) standard ANSI N13.3, Performance Criteria for Bioassay.'' The draft standard provides guidance to in vivo counting facilities regarding the sensitivity, precision, and accuracy of measurements for certain categories of commonly assayed radionuclides and critical regions of the body. This report concludes the testing program by presenting the results of the Round Two testing. Testing involved two types of measurements: chest counting for radionuclide detection in the lung, and whole body counting for detection of uniformly distributed material. Each type of measurement was further divided into radionuclide categories as defined in the draft standard. The appropriateness of the draft standard criteria by measuring a laboratory's ability to attain them were judged by the results of both round One and Round Two testing. The testing determined that performance criteria are set at attainable levels, and the majority of in vivo monitoring facilities passed the criteria when complete results were submitted. 18 refs., 18 figs., 15 tabs.

  8. Calorimetric system and method

    DOEpatents

    Gschneidner, K.A. Jr.; Pecharsky, V.K.; Moorman, J.O.

    1998-09-15

    Apparatus is described for measuring heat capacity of a sample where a series of measurements are taken in succession comprises a sample holder in which a sample to be measured is disposed, a temperature sensor and sample heater for providing a heat pulse thermally connected to the sample, and an adiabatic heat shield in which the sample holder is positioned and including an electrical heater. An electrical power supply device provides an electrical power output to the sample heater to generate a heat pulse. The electrical power from a power source to the heat shield heater is adjusted by a control device, if necessary, from one measurement to the next in response to a sample temperature-versus-time change determined before and after a previous heat pulse to provide a subsequent sample temperature-versus-time change that is substantially linear before and after the subsequent heat pulse. A temperature sensor is used and operable over a range of temperatures ranging from approximately 3K to 350K depending upon the refrigerant used. The sample optionally can be subjected to dc magnetic fields such as from 0 to 12 Tesla (0 to 120 kOe). 18 figs.

  9. Recognition and source correlation of migrated hydrocarbons in Upper Jurassic Hareelv Formation, Jameson Land, east Greenland

    SciTech Connect

    Requejo, A.G.; Hollywood, J.; Halpern, H.I. )

    1989-09-01

    Organic geochemical analysis of an interbedded shales and sandstone sequence from the Upper Jurassic Hareelv Formation, Jameson Land, East Greenland, has revealed oil shows in the sandstones, consistent with petroleum generation and migration. A comparison of the molecular characteristics of extractable material from the sandstones with those of kerogen and bitumen from the shales indicates that the most likely origin of these shows is generation within the shales with expulsion and short-range migration into the sandstones. This conclusion is based on comparisons of biological marker distributions, stable carbon isotopic compositions of extractable material and kerogen, and pyrolysate compositions of kerogen and asphaltenes. Oil from a seep in the Savoia Halvo region south of Jameson Land can be correlated to the Jurassic sandstone oil shows based on similar isotopic compositions and asphaltene pyrolysate distributions. Impregnation of both sandstones and shales throughout the sequence by products generated at higher maturities is considered unlikely, but cannot be ruled out by the existing data. 18 figs., 6 tabs.

  10. Influence of orographic and canopy conditions on friction velocities observed during frontal events using Doppler sodar observations

    SciTech Connect

    Kotroni, V.; Amory-Mazaudier, C. )

    1993-03-01

    Sodar friction velocities, obtained during frontal events traversing areas characterized by different orographic and canopy conditions (flat, bare ground, small hills and valleys with agricultural crops and trees, agricultural crops and forest on a flat ground, bare ground on the side of a mountain), are compared in order to identify the influence of topography on this parameter. For some case studies, sounding and sodar data are combined in order to provide a relation between the friction velocity and the low-level jet presence. For the cases analyzed in this paper, the following results are obtained: the frontal passage is associated with a decrease of the horizontal wind speed (about 50% in magnitude) in the surface layer, and an increase of the friction velocity before the frontal passage followed by a decrease just at the time of the frontal passage or with a little delay. Friction velocity is more intense in the cold side of the low-level jet and its maximum represents 2% of the low-level jet maximum magnitude. As it concerns the influence of the terrain conditions on friction velocity, mountain effects yield to more intense friction-velocity values and to a superposition of an oscillating behavior on the time variation of friction velocity, while forest effects induce a shift of the frontal signature on the time variation of friction velocity at higher height levels. 25 refs., 18 figs., 3 tabs.

  11. Reference concepts for a space-based hydrogen-oxygen combustion, turboalternator, burst power system

    SciTech Connect

    Edenburn, M.W.

    1990-07-01

    This report describes reference concepts for a hydrogen-oxygen combustion, turboalternator power system that supplies power during battle engagement to a space-based, ballistic missile defense platform. All of the concepts are open''; that is, they exhaust hydrogen or a mixture of hydrogen and water vapor into space. We considered the situation where hydrogen is presumed to be free to the power system because it is also needed to cool the platform's weapon and the situation where hydrogen is not free and its mass must be added to that of the power system. We also considered the situation where water vapor is an acceptable exhaust and the situation where it is not. The combination of these two sets of situations required four different power generation systems, and this report describes each, suggests parameter values, and estimates masses for each of the four. These reference concepts are expected to serve as a baseline'' to which other types of power systems can be compared, and they are expected to help guide technology development efforts in that they suggest parameter value ranges that will lead to optimum system designs. 7 refs., 18 figs., 5 tabs.

  12. Modelling the rheological behavior of high solids CWM systems using a new rheological equation

    SciTech Connect

    Hafaiedh, A.; Dinger, D.R.; Funk, J.E.

    1986-05-01

    The understanding of the rheology of concentrated suspensions is an important part of the control and preparation of ceramic slips and pastes and coal water slurries. Many studies have been conducted on concentrated suspensions; many attempts have been made to formulate equations which describe their behavior; and many attempts have been made to use these equations to predict the behavior of slurries and slips. This paper describes a modification to one of the more commonly used rheological equations, the Bingham equation (E.C. Bingham, ''An Investigation of the Laws of Plastic Flow'', Bulletin of the Bureau of Standards'', Volume 13, pp. 309-353 (1916-1917)), and the initial attempts to use it to understand and model the rheological behavior of high solids CWM. The paper will include the description of the new equation, its derivation, and examples of the various forms of the resulting rheograms. Then in the second part of the paper, the equation will be used to analyze the behavior of some typical CWM systems made from Cedar Grove and Moss seam coals. 8 refs., 18 figs.

  13. Characteristics of spent fuel, high-level waste, and other radioactive wastes which may require long-term isolation

    SciTech Connect

    1987-12-01

    The purpose of this report, and the information contained in the associated computerized data bases, is to establish the DOE/OCRWM reference characteristics of the radioactive waste materials that may be accepted by DOE for emplacement in the mined geologic disposal system. This report provides relevant technical data for use by DOE and its supporting contractors and is not intended to be a policy document. This document is backed up by five PC-compatible data bases, written in a user-oriented, menu-driven format, which were developed for this purpose. The data bases are the LWR Assemblies Data Base; the LWR Radiological Data Base; the LWR Quantities Data Base; the LWR NFA Hardware Data Base; and the High-Level Waste Data Base. The above data bases may be ordered using the included form. An introductory information diskette can be found inside the back cover of this report. It provides a brief introduction to each of these five PC data bases. 116 refs., 18 figs., 67 tabs.

  14. Core structure heat-up and material relocation in a BWR short-term station blackout accident

    SciTech Connect

    Schmidt, R.C.; Dosanjh, S.S.

    1990-01-01

    This paper presents an analytical and numerical analysis which evaluates the core-structure heat-up and subsequent relocation of molten core materials during a NWR short-term station blackout accident with ADS. A simplified one-dimensional approach coupled with bounding arguments is first presented to establish an estimate of the temperature differences within a BWR assembly at the point when structural material first begins to melt. This analysis leads to the conclusions that the control blade will be the first structure to melt and that at this point in time, overall temperature differences across the canister-blade region will not be more than 200 K. Next, a three-dimensional heat-transfer model of the canister-blade region within the core is presented that uses a diffusion approximation for the radiation heat transfer. This is compared to the one-dimensional analysis to establish its compatibility. Finally, the extension of the three-dimensional model to include melt relocation using a porous media type approximation is described. The results of this analysis suggest that under these conditions significant amounts of material will relocate to the core plate region and refreeze, potentially forming a significant blockage. The results also indicate that a large amount of lateral spreading of the melted blade and canister material into the fuel rod regions will occur during the melt progression process. 22 refs., 18 figs., 1 tab.

  15. The Idaho National Engineering Laboratory Site environmental report for calendar Year 1990

    SciTech Connect

    Hoff, D.L.; Mitchell, R.G.; Moore, R.; Shaw, R.M.

    1991-06-01

    The results of the various monitoring programs for 1990 indicate that most radioactivity from the Idaho National Engineering Laboratory (INEL) operations could not be distinguished from worldwide fallout and natural radioactivity in the region surrounding the INEL Site. Although some radioactive materials were discharged during Site operations, concentrations and doses to the surrounding population were of no health consequence and were far less than State of Idaho and Federal health protection guidelines. The first section of the report summarizes Calendar Year 1990 and January 1 through April 1, 1991, INEL activities related to compliance with environmental regulations and laws. The balance of the report describes the surveillance program, the collection of foodstuffs at the INEL boundary and distant offsite locations, and the collection of air and water samples at onsite locations and offsite boundary and distant locations. The report also compares and evaluates the sample results and discusses implications, if any. Nonradioactive and radioactive effluent monitoring at the Site, and the US Geological Survey (USGS) ground-water monitoring program are also summarized. 33 refs., 18 figs., 29 tabs.

  16. Environmental radiological studies in 1989 near the Rancho Seco Nuclear Power Generating Station

    SciTech Connect

    Robison, W.L.; Wong, Kai M.; Jones, H.E.

    1990-11-01

    In December 1988, the Sacramento Municipal Utilities District (SMUD) asked the Lawrence Livermore National Laboratory's (LLNL) Environmental Sciences Division (ENV) to collect sediment, water,and fish samples downstream from the Rancho Seco Nuclear Power Generating Station for analysis of radionuclides to compare with results from earlier surveys in 1984 through 1987 (1--8). ENV was, however, asked to reduce the total number of sample collections to a minimum in this study because of financial constraints. The proposal ENV submitted for the 1989 Environmental Radiological Studies downstream of the Rancho Seco Nuclear Power Generating Station reflected this reduction, but we believe, nevertheless, the 1989 efforts do allow us to make some meaningful comparisons with the previous studies. Cesium-137 is the most significant radionuclide still observed downstream from the Rancho Seco Nuclear Power Plant. Only occasionally is {sup 134}Cs or {sup 60}CO observed. In 1989, the concentration of {sup 137}Cs in the water and fish decreased with distance from the plant to the same level that is was in 1987, and was lower than it had been from 1984 through 1986. The concentration ratio (CR) for {sup 137}Cs in fish is between 1000 and 1500, which is below the NRC default value of 2000. Physical mixing in the creek environment has moved the {sup 137}Cs deeper into the sediment column, thereby reducing the concentration in the top 12 cm relative to that in previous years. 8 refs., 18 figs., 9 tabs.

  17. Joint remodelling and the evolution of the human hand.

    PubMed Central

    Lewis, O J

    1977-01-01

    A funtional morphological study has been made of the joints of the primate hand, particular emphasis being placed upon the carpometacarpal and metacarpophalangeal joints. The presumptive evolutionary history of these joints has been charted by reference to a comparative series of mammals. It has been demonstrated that the human joints have been quite strikingly modified in a number of ways, and that these evolutionary changes may be logically correlated with the refined functional attributes of the human hand. The morphological background thus established has been applied in a preliminary study of the hand bones of various fossil hominids. Images Fig. 7 Fig. 8 Figs. 15 and 16 Figs. 17 and 18 Figs. 19 and 20 Fig. 21 Fig. 22 Fig. 23 Figs. 24 and 25 Figs. 26 and 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 Fig. 36 Fig. 37 Fig. 38 Fig. 39 Fig. 40 Fig. 41 Fig. 42 Fig. 43 Fig. 44 Fig. 45 PMID:402345

  18. Study on collection efficiency of fission products by spray: Experimental device and modelling

    SciTech Connect

    Ducret, D.; Roblot, D.; Vendel, J.; Billarand, Y.

    1997-08-01

    Consequences of an hypothetical overheating reactor accident in nuclear power plants can be limited by spraying cold water drops into containment building. The spray reduces the pressure and the temperature levels by condensation of steam and leads to the washout of fission products (aerosols and gaseous iodine). The present study includes a large program devoted to the evaluation of realistic washout rates. An experimental device (named CARAIDAS) was designed and built in order to determine the collection efficiency of aerosols and iodine absorption by drops with representative conditions of post-accident atmosphere. This experimental device is presented in the paper and more particularly: (1) the experimental enclosure in which representative thermodynamic conditions can be achieved, (2) the monosized drops generator, the drops diameter measurement and the drops collector, (3) the cesium iodide aerosols generator and the aerosols measurements. Modelling of steam condensation on drops aerosols collection and iodine absorption are described. First experimental and code results on drops and aerosols behaviour are compared. 8 refs., 18 figs.

  19. Borehole magnetostratigraphy, absolute age dating, and correlation of sedimentary rocks, with examples from the Paris Basin, France

    SciTech Connect

    Bouisset, P.M. ); Augustin, A.M. )

    1993-04-01

    Total and CEA have conceived and developed two new logging tools which allow continuous, precise, and accurate in-situ magnetic measurements within weakly magnetized sedimentary rocks encountered in uncased industry drilled wells. The combination of these magnetic measurements permits for the first time continuous determination of natural remanent magnetization (NRM) polarities occurring in the logged section. The resulting well magnetostratigraphic sequence (WMS) which may be recognized from well to well (magnetostratigraphic correlations), may also be correlative to a geomagnetic polarity time scale (GPTS) of reference magnetostratigraphic scale (RMS), given adequate dating tie points and lack of noticeable remagnetizations. Application of this method to the Upper Jurrasic formation in four wells of the Paris basin has yielded promising results for both stratigraphic and near absolute age correlations as well as determination of facies diachronisms. The comparison of results obtained from magnetic measurements and from sequence stratigraphy analysis shows that third-order sequence boundaries may be correlative to geomagnetic reversals, but may also be diachronous in wells 80 km or less apart. The potential of borehole magnetic measurements as presented in this paper is still under investigation. However, these encouraging initial results show that this new investigating and dating method could be of great help in the analysis of subsurface stratigraphy by extending the concepts of magnetostratigraphy from the outcrops and laboratory directly into borehole logging. 81 refs., 18 figs.

  20. Fiber optics spectrochemical emission sensors

    DOEpatents

    Griffin, J.W.; Olsen, K.B.

    1992-02-04

    A method is described of in situ monitoring of a body of a fluid stored in a tank or groundwater or vadose zone gases in a well for the presence of selected chemical species. The method uses a probe insertable into the well or tank via a cable and having an electrical apparatus for exciting selected chemical species in the body of fluid. The probe can have a pair of electrodes for initiating a spark or a plasma cell for maintaining a plasma to excite the selected chemical species. The probe also has an optical apparatus for receiving optical emissions emitted by the excited species and optically transmitting the emissions via the cable to an analysis location outside the well. The analysis includes detecting a selected wavelength in the emissions indicative of the presence of the selected chemical species. A plurality of probes can be suspended at an end of a respective cable, with the transmitting and analyzing steps for each probe being synchronized sequentially for one set of support equipment and instrumentation to monitor at multiple test points. The optical apparatus is arranged about the light guide axis so that the selected chemical species are excited in the fluid in alignment with the light guide axis. Optical emissions are received from the excited chemical species along such axis. 18 figs.

  1. Computation and control with neural nets

    SciTech Connect

    Corneliusen, A.; Terdal, P.; Knight, T.; Spencer, J.

    1989-10-04

    As energies have increased exponentially with time so have the size and complexity of accelerators and control systems. NN may offer the kinds of improvements in computation and control that are needed to maintain acceptable functionality. For control their associative characteristics could provide signal conversion or data translation. Because they can do any computation such as least squares, they can close feedback loops autonomously to provide intelligent control at the point of action rather than at a central location that requires transfers, conversions, hand-shaking and other costly repetitions like input protection. Both computation and control can be integrated on a single chip, printed circuit or an optical equivalent that is also inherently faster through full parallel operation. For such reasons one expects lower costs and better results. Such systems could be optimized by integrating sensor and signal processing functions. Distributed nets of such hardware could communicate and provide global monitoring and multiprocessing in various ways e.g. via token, slotted or parallel rings (or Steiner trees) for compatibility with existing systems. Problems and advantages of this approach such as an optimal, real-time Turing machine are discussed. Simple examples are simulated and hardware implemented using discrete elements that demonstrate some basic characteristics of learning and parallelism. Future microprocessors' are predicted and requested on this basis. 19 refs., 18 figs.

  2. Safety assessment: Pinellas Plant Child Development Center/Partnership School

    SciTech Connect

    Not Available

    1990-06-21

    This document describes the Child Development Center/Partnership School and its unique relationship to the Pinellas Plant. The school and its operation are described in detail, along with the administrative and engineering controls in place to ensure the safety of the facility. Special emphasis is placed on the analyses of potential risks to school operations and personnel which may be posed by their close proximity to the plant. A recent Safety Systems Management Assay (SSMA) was used as a guide in describing both routine operations and potential credible accident scenarios at the Pinellas Plant site. The Safety Assessment concluded that, although potential accidents at the Pinellas Plant could result in injury to personnel on the school site, the low probability of these incidents would make operation of the school an acceptable risk. The risks associated with routine operations at the plant are similar to those encountered at a large-scale electronics manufacturing plant. Numerous safeguards are in place to limit the effects of any credible accident on the Pinellas Plant and school site. 32 refs., 18 figs., 33 tabs.

  3. Powered air-purifying respirator study: Final report

    SciTech Connect

    da Roza, R.A.; Cadena-Fix, C.A.; Kramer, J.E.

    1986-07-01

    Three brands of powered air-purifying respirators were subjected to a simulated-work-place study. They were worn by six human subjects while working at 80% of their cardiac reserve on a treadmill. The air flow into the respirator was controlled to match that of a respirator with a newly charged battery and with various stages of battery discharge and filter plugging. The simulation took place in a large quantitative fit test chamber containing PEG 400 aerosol. The penetration of aerosol into the breathing zone of the respirator, the pressure in it, and the air flow were monitored while the subject was warming up as well as during the 80% tests. The exercises recommended in ANSI Z88.2 for helmets were also used after the 80% tests were completed. The subjects were tested clean shaven, with three days' growth of stubble, and with a two-month beard growth. A striking result was that the aerosol penetration into the two-helmet respirators increased dramatically as the subjects work rate increased. On the other hand, penetration into the half mask did not change with work rate. The penetration increased as the air flow was decreased in all cases for the helmets and for beard and stubble cases for the half mask. However, for he tight-fitting half mask on a clean-shaven face, the average penetration stayed below 0.001 for all flows. 18 figs, 5 tabs.

  4. A history of central collisions at the Bevalac

    SciTech Connect

    Poskanzer, A.M.

    1989-07-01

    You have heard a great deal about Plastic Ball results at this conference. There were talks on the first morning by Hans-Georg Ritter and Karl-Heinz Kampert on the Plastic Ball at Berkeley, there will be a talk next week by Rudi Schmidt on the Plastic Ball at CERN, and many other speakers have mentioned Plastic Ball results. The young students may think that when the new field of relativistic heavy ion physics opened up, an ideal detector was designed and built, data immediately analyzed, and results produced. The theme of my talk is to show that this is incorrect. The experiments proceeded in logical stages, one building upon the other, increasing in complexity and sophistication. The analysis techniques and the theory developed along with the experiments. If the more senior people in the audience easily remember this history of the development of the relativistic heavy ion field, they may spend their time during this talk thinking about what is happening now and what will happen in the future in the ultrarelativistic heavy ion field, where I believe history is repeating itself. 18 refs., 18 figs.

  5. Bioconversion of coal-derived synthesis gas to liquid fuels. [Butyribacterium methylotrophicum

    SciTech Connect

    Jain, M.K.

    1991-01-01

    The use of coal-derived synthesis gas as an industrial feedstock for production of fuels and chemicals has become an increasingly attractive alternative to present petroleum-based chemicals production. However, one of the major limitations in developing such a process is the required removal of catalyst poisons such as hydrogen sulfide (H{sub 2}S), carbonyl sulfide (COS), and other trace contaminants from the synthesis gas. Purification steps necessary to remove these are energy intensive and add significantly to the production cost, particularly for coals having a high sulfur content such as Illinois coal. A two-stage, anaerobic bioconversion process requiring little or no sulfur removal is proposed, where in the first stage the carbon monoxide (CO) gas is converted to butyric and acetic acids by the CO strain of Butyribacterium methylotrophicum. In the second stage, these acids along with the hydrogen (H{sub 2}) gas are converted to butanol, ethanol, and acetone by an acid utilizing mutant of Clostridium acetobutylicum. 18 figs., 18 tabs.

  6. Bioconversion of coal-derived synthesis gas to liquid fuels. Final technical report, September 1, 1990--August 31, 1991

    SciTech Connect

    Jain, M.K.

    1991-12-31

    The use of coal-derived synthesis gas as an industrial feedstock for production of fuels and chemicals has become an increasingly attractive alternative to present petroleum-based chemicals production. However, one of the major limitations in developing such a process is the required removal of catalyst poisons such as hydrogen sulfide (H{sub 2}S), carbonyl sulfide (COS), and other trace contaminants from the synthesis gas. Purification steps necessary to remove these are energy intensive and add significantly to the production cost, particularly for coals having a high sulfur content such as Illinois coal. A two-stage, anaerobic bioconversion process requiring little or no sulfur removal is proposed, where in the first stage the carbon monoxide (CO) gas is converted to butyric and acetic acids by the CO strain of Butyribacterium methylotrophicum. In the second stage, these acids along with the hydrogen (H{sub 2}) gas are converted to butanol, ethanol, and acetone by an acid utilizing mutant of Clostridium acetobutylicum. 18 figs., 18 tabs.

  7. Electro-optic voltage sensor for sensing voltage in an E-field

    DOEpatents

    Woods, G.K.; Renak, T.W.

    1999-04-06

    A miniature electro-optic voltage sensor system capable of accurate operation at high voltages is disclosed. The system employs a transmitter, a sensor disposed adjacent to but out of direct electrical contact with a conductor on which the voltage is to be measured, a detector, and a signal processor. The transmitter produces a beam of electromagnetic radiation which is routed into the sensor where the beam undergoes the Pockels electro-optic effect. The electro-optic effect causes phase shifting in the beam, which is in turn converted to a pair of independent beams, from which the voltage of a system based on its E-field is determined when the two beams are normalized by the signal processor. The sensor converts the beam by splitting the beam in accordance with the axes of the beam`s polarization state (an ellipse whose ellipticity varies between -1 and +1 in proportion to voltage) into at least two AM signals. These AM signals are fed into a signal processor and processed to determine the voltage between a ground conductor and the conductor on which voltage is being measured. 18 figs.

  8. Solar-driven coal gasification in a thermally irradiated packed-bed reactor

    SciTech Connect

    Nicolas Piatkowski; Aldo Steinfeld

    2008-05-15

    Coal gasification for high-quality synthesis gas production is considered using concentrated solar energy as the source of high-temperature process heat. The solar reactor consists of two cavities separated by a radiant emitter plate, with the upper one serving as the solar absorber and the lower one containing the reacting packed bed that shrinks as the reaction progresses. A 5 kW prototype reactor with an 8 cm depth, 14.3 cm diameter cylindrical bed was fabricated and tested in a high-flux solar furnace, subjected to solar flux concentrations up to 2600 suns and packed-bed temperatures up to 1440 K. The reactor is modeled by formulating the 1D unsteady energy conservation equation that couples conductive-radiative heat transfer with the reaction kinetics and solving it by the finite volume technique for a transient shrinking domain. The overall reaction rate was determined experimentally by thermogravimetry, while the effective thermal conductivity was determined experimentally in a radial heat flow oven. Model validation was accomplished in terms of bed temperatures, gasified mass, and bed shrink rates measured in solar experiments conducted with beech charcoal. Heat transfer through the bed proved to be the rate-controlling mechanism, indicating an ablation regime. 31 refs., 18 figs.

  9. Work plan for the remedial investigation/feasibility study-environmental assessment for the Colonie site, Colonie, New York

    SciTech Connect

    Not Available

    1990-06-01

    This work plan has been prepared to document the scoping and planning process performed by the US Department of Energy (DOE) to support remedial action activities at the Colonie site. The site is located in eastern New York State in the town of Colonie near the city of Albany. Remedial action of the Colonie site is being planned as part of DOE's Formerly Utilized Sites Remedial Action Program. The DOE is responsible for controlling the release of all radioactive and chemical contaminants from the site. Under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), a remedial investigation/feasibility study (RI/FS) must be prepared to support the decision-making process for evaluating remedial action alternatives. This work plan contains a summary of information known about the site as of January 1988, presents a conceptual site model that identifies potential routes of human exposure to site containments, identifies data gaps, and summarizes the process and proposed studies that will be used to fill the data gaps. In addition, DOE activities must be conducted in compliance with the National Environmental Policy Act (NEPA), which requires consideration of the environmental consequences of a proposed action as part of its decision-making process. This work also describes the approach that will be used to evaluate potential remedial action alternatives and includes a description of the organization, project controls, and task schedules that will be employed to fulfill the requirements of both CERCLA and NEPA. 48 refs., 18 figs., 25 tabs.

  10. Mechanism of stress-corrosion cracking of Alloy X-750 in high purity water

    SciTech Connect

    Grove, C.A.; Petzold, L.D.

    1985-11-01

    The high strength Ni-base Alloy X-750 is susceptible to stress-corrosion cracking (SCC) in high purity, deaerated water. Crack initiation occurs at high temperatures (>400F). Crack propagation occurs in both high-temperature and low-temperature (<300F) water. High-temperature crack growth rates are on the order of mils/day. Low-temperature cracking is extremely rapid (approx.100 in./day). Three heat treatments of Alloy X-750 are investigated: (1) Stress Equalized - 1625F/24 hr + 1300F/20 hr, (2) Direct Aged - 1300F/24 hr, and (3) Solution Annealed and Direct Aged - 2000F/1 hr + 1300F/20 hr. Stress-equalized Alloy X-750 is most susceptible to SCC; solution-annealed and direct-aged Alloy X-750 is least susceptible. A Hydrogen Embrittlement Model of SCC is developed that predicts SCC performance on the basis of grain boundary chemistry and grain boundary carbides. Phosphorus segregates to the grain boundary in concentrations of up to approx.100 times the bulk concentration during processing and heat treatment. Phosphorus at the grain boundaries increases susceptibility to high- and low-temperature SCC. The presence of M23C6-type carbides and/or the absence of MC-type carbides at the grain boundaries improves SCC performance in high-temperature water. 18 figs., 5 tabs.

  11. Recovery process for electroless plating baths

    DOEpatents

    Anderson, R.W.; Neff, W.A.

    1992-05-12

    A process is described for removing, from spent electroless metal plating bath solutions, accumulated byproducts and counter-ions that have deleterious effects on plating. The solution, or a portion thereof, is passed through a selected cation exchange resin bed in hydrogen form, the resin selected from strong acid cation exchangers and combinations of intermediate acid cation exchangers with strong acid cation exchangers. Sodium and nickel ions are sorbed in the selected cation exchanger, with little removal of other constituents. The remaining solution is subjected to sulfate removal through precipitation of calcium sulfate hemihydrate using, sequentially, CaO and then CaCO[sub 3]. Phosphite removal from the solution is accomplished by the addition of MgO to form magnesium phosphite trihydrate. The washed precipitates of these steps can be safely discarded in nontoxic land fills, or used in various chemical industries. Finally, any remaining solution can be concentrated, adjusted for pH, and be ready for reuse. The plating metal can be removed from the exchanger with sulfuric acid or with the filtrate from the magnesium phosphite precipitation forming a sulfate of the plating metal for reuse. The process is illustrated as applied to processing electroless nickel plating baths. 18 figs.

  12. Time-dependent two-dimensional radiation hydrodynamics of accreting matter onto highly magnetized neutron stars

    SciTech Connect

    Klein, R.I. . Dept. of Astronomy Lawrence Livermore National Lab., CA California Univ., Los Angeles, CA . Inst. of Geophysics and Planetary Physics); Arons, J. . Dept. of Astronomy California Univ., Los Angeles, CA . Inst. of Geophysics and Planetary Physics CEA Centre d'Etudes Nucleaires de Saclay, 91 -

    1989-11-24

    We present for the first time, the self-consistent solution of the two-dimensional, time-dependent equations of radiation-hydrodynamics governing the accretion of matter onto the highly magnetized polar caps of luminous x-ray pulsars. The calculations show a structure in the accretion column very different from previous one-zone uniform models. We have included all the relevant magnetic field corrections to both the hydrodynamics and the radiative transport. We include a new theory for the diffusion and advection of both radiation energy density and photon number density. For initially uniformly accreting models with super-Eddington flows, we have uncovered evidence of strong radiation-driven outflowing optically thin radiation filled regions of the accretion column embedded in optically-thick inflowing plasma. The development of these photon bubbles'' have growth times on the order of a millisecond and show fluctuations on sub-millisecond timescales. The photon bubbles are likely to be a consequence of convective over-stability and may result in observable fluctuations in the emitted luminosity leading to luminosity dependent changes in the pulse profile. This may provide important new diagnostics for conditions in accreting x-ray pulsars. 13 refs., 18 figs.

  13. Identification of hydrocarbon sources in the benthic sediments of Prince William Sound and the Gulf of Alaska following the Exxon Valdez oil spill

    SciTech Connect

    Page, D.S.; Boehm, P.D.; Douglas, G.S.; Bence, A.E.

    1995-12-31

    Advanced hydrocarbon fingerprinting methods and improved analytical methods make possible the quantitative discrimination of the multiple sources of hydrocarbons in the benthic sediments of Prince William Sound (PWS) and the Gulf of Alaska. These methods measure an extensive range of polycyclic aromatic hydrocarbons (PAH) at detection levels that are as much as two orders of magnitude lower than those obtained by standard Environmental Protection Agency methods. Nineteen hundred thirty six subtidal sediment samples collected in the sound and the eastern Gulf of Alaska in 1989, 1990, and 1991 were analyzed. Fingerprint analyses of gas chromatography-mass spectrometry data reveal a natural background of petrogenic and biogenic PAH. Exxon Valdez crude, its weathering products, and diesel fuel refined from Alaska North Slope crude are readily distinguished from the natural seep petroleum background and from each other because of their distinctive PAH distributions. Mixing models were developed to calculate the PAH contributions from each source to each sediment sample. These calculations show that most of the seafloor in PWS contains no detectable hydrocarbons from the Exxon Valdez spill, although elevated concentrations of PAH from seep sources are widespread. In those areas where they were detected, spill hydrocarbons were generally a small increment to the natural petroleum hydrocarbon background. Low levels of Exxon Valdez crude residue were present in 1989 and again in 1990 in nearshore subtidal sediments off some shorelines that had been heavily oiled. By 1991 these crude residues were heavily degraded and even more sporadically distributed. 58 refs., 18 figs., 5 tabs.

  14. Advanced technology and manufacturing practices for machining and inspecting metal matrix composites. Final CRADA report for CRADA number Y-1292-0092

    SciTech Connect

    Fell, H.A.; Shelton, J.E.; LaMance, G.M.; Kennedy, C.R.

    1995-02-26

    Lockheed Martin Energy Systems, Inc. (Energy Systems) and the Lanxide Corporation (Lanxide) negotiated a Cooperative Research and Development Agreement (CRADA) to develop advanced technology and manufacturing practices for machining and inspecting metal matrix composites (MMC). The objective of this CRADA was to develop machining parameters to allow manufacturing of automotive components from MMCs. These parts exhibit a range of shapes and dimensional tolerances and require a large number of machining operations. The common characteristic of the components is the use of the light weight MMC materials to replace heavier materials. This allows smaller and lighter moving parts and supporting structural components thereby increasing fuel mileage. The CRADA was divided into three areas: basic investigation of cutting parameters, establishment of a mock production line for components, and optimization of parameters in the mock facility. This report covers the manufacturing of MMCs and preliminary Phase I testing for silicon carbide having various loading percentages and extensive Phase I testing of cutting parameters on 30% alumina loaded aluminum. On January 26, 1995, a letter from the vice president, technology at Lanxide was issued terminating the CRADA due to changes in business. 9 refs., 18 figs., 3 tabs.

  15. Relativistic nuclear many-body theory

    SciTech Connect

    Serot, B.D. ); Walecka, J.D. . Continuous Electron Beam Accelerator Facility)

    1991-09-11

    Nonrelativistic models of nuclear systems have provided important insight into nuclear physics. In future experiments, nuclear systems will be examined under extreme conditions of density and temperature, and their response will be probed at momentum and energy transfers larger than the nucleon mass. It is therefore essential to develop reliable models that go beyond the traditional nonrelativistic many-body framework. General properties of physics, such as quantum mechanics, Lorentz covariance, and microscopic causality, motivate the use of quantum field theories to describe the interacting, relativistic, nuclear many-body system. Renormalizable models based on hadronic degrees of freedom (quantum hadrodynamics) are presented, and the assumptions underlying this framework are discussed. Some applications and successes of quantum hadrodynamics are described, with an emphasis on the new features arising from relativity. Examples include the nuclear equation of state, the shell model, nucleon-nucleus scattering, and the inclusion of zero-point vacuum corrections. Current issues and problems are also considered, such as the construction of improved approximations, the full role of the quantum vacuum, and the relationship between quantum hadrodynamics and quantum chromodynamics. We also speculate on future developments. 103 refs., 18 figs.

  16. The effects of a perturbed source on contaminant transport near the Weldon Spring quarry

    SciTech Connect

    Tomasko, D.

    1989-03-01

    The effects of a perturbed contamination source at the Weldon Spring quarry in St. Charles County, Missouri, on downstream solute concentrations were investigated using one-dimensional analytical solutions to an advection-dispersion equation developed for both constant-strength and multiple-stepped source functions. A sensitivity study using parameter base-case values and ranges consistent with the geologic conceptualization of the quarry area indicates that the parameters having the greatest effect on predicted concentrations are the distance from the quarry to the point of interest, the average linear groundwater velocity, the contaminant retardation coefficient, and the amplitude and duration of the source perturbation caused by response action activities. Use of base-case parameter value and realistic values for the amplitude and duration of the source perturbation produced a small effect on solute concentrations near the western extremity of the nearby municipal well field, as well as small uncertainties in the predicted results for the assumed model. The effect of simplifying assumptions made in deriving the analytic solution is unknown: use of a multidimensional flow and transport model and additional field work are needed to validate the model. 13 refs., 18 figs.

  17. Photon beam position monitor

    DOEpatents

    Kuzay, T.M.; Shu, D.

    1995-02-07

    A photon beam position monitor is disclosed for use in the front end of a beamline of a high heat flux and high energy photon source such as a synchrotron radiation storage ring detects and measures the position and, when a pair of such monitors are used in tandem, the slope of a photon beam emanating from an insertion device such as a wiggler or an undulator inserted in the straight sections of the ring. The photon beam position monitor includes a plurality of spaced blades for precisely locating the photon beam, with each blade comprised of chemical vapor deposition (CVD) diamond with an outer metal coating of a photon sensitive metal such as tungsten, molybdenum, etc., which combination emits electrons when a high energy photon beam is incident upon the blade. Two such monitors are contemplated for use in the front end of the beamline, with the two monitors having vertically and horizontally offset detector blades to avoid blade ''shadowing''. Provision is made for aligning the detector blades with the photon beam and limiting detector blade temperature during operation. 18 figs.

  18. Transition-metal doped sulfide, selenide, and telluride laser crystal and lasers

    DOEpatents

    Krupke, W.F.; Page, R.H.; DeLoach, L.D.; Payne, S.A.

    1996-07-30

    A new class of solid state laser crystals and lasers are formed of transition metal doped sulfide, selenide, and telluride host crystals which have four fold coordinated substitutional sites. The host crystals include II-VI compounds. The host crystal is doped with a transition metal laser ion, e.g., chromium, cobalt or iron. In particular, Cr{sup 2+}-doped ZnS and ZnSe generate laser action near 2.3 {micro}m. Oxide, chloride, fluoride, bromide and iodide crystals with similar structures can also be used. Important aspects of these laser materials are the tetrahedral site symmetry of the host crystal, low excited state absorption losses and high luminescence efficiency, and the d{sup 4} and d{sup 6} electronic configurations of the transition metal ions. The same materials are also useful as saturable absorbers for passive Q-switching applications. The laser materials can be used as gain media in amplifiers and oscillators; these gain media can be incorporated into waveguides and semiconductor lasers. 18 figs.

  19. Studies on a novel approach for the separation of L-phenylalanine amino acid from fermentation broth using a newly developed charged ultrafiltration membrane. I. Single solute system

    SciTech Connect

    Agarwal, A.K.; Huang, R.Y.M. )

    1994-01-01

    A newly developed thin-film composite (TFC) ultrafiltration membrane made of sulfonated poly(phenylene oxide) (SPPO) was used to establish the feasibility of separating L-phenylalanine from the fermentation broth containing a number of dissolved inorganic and organic solutes as an alternative approach to the currently used complex and uneconomical conventional ion-exchange schemes. It was found that the rejection of inorganic salts in a single component system was highly dependent on the feed solution concentration and varied inversely with it. The pH of the feed solution was found to have a strong effect on the rejection of L-phenylalanine, changing it from - 10 to 90%. This rejection behavior was identical for the two TFC-SPPO membrane samples which had molecular weight cutoff ratings of 10,000 and 20,000, respectively, although the permeate flux of the latter sample was almost twice that of the former sample. It was found that glucose molecules were not rejected by the membrane. 11 refs., 18 figs., 2 tab.

  20. Impact of air and refrigerant maldistributions on the performance of finned-tube evaporators with R-22 and R-407C. Final Report

    SciTech Connect

    Lee, Jangho; Domanski, P.A.

    1997-07-01

    The report presents basic features of the evaporator model, EVAP5M, and simulation results for an evaporator operating with R-22 and R-407C at non-uniform air and refrigerant distributions. EVAP5M was developed under this project to provide a tool for simulating a finned-tube air-to refrigerant evaporator operating with single-component refrigerants and refrigerant mixtures. The tube-by-tube modeling approach allowed for one-dimensional non-uniformity in the air velocity profile and arbitrary maldistribution on the refrigerant side. The model uses the Carnahan-Starling-DeSantis equation of state for calculating refrigerant thermodynamic properties. Simulations were performed for three evaporator slabs with different refrigerant circuitry designs. For the maldistributions studied, maldistributed air caused much more significant capacity degradation than maldistributed refrigerant. In some cases capacity decreased to as low as 57 percent of the value obtained for uniform velocity profile. Simulation results showed that R-22 and R-407C have similar susceptibility to capacity degradation. Relative change of capacity varied depending on the evaporator design and maldistribution studied. 17 refs., 18 figs., 9 tabs.

  1. Drilling, completion, and testing of geothermal wells CD-1 and CD-2, Caliente, Nevada

    SciTech Connect

    Larson, K.; Flynn, T.

    1982-01-01

    Two geothermal test wells were drilled in January 1983, in Antelope Canyon to access the potential for resource utilization by the City of Caliente's proposed space heating district. Both holes, drilled into bedrock at 220 feet, encountered hot water in the upper part of the hole (40 to 100 feet) and cooler water below (100 to 210 feet). A series of pumping tests were completed in February 1983, including pump-efficiency tests, stepped draw-down tests, and 1-, 2-, and 3-day sustained pumping tests. The test results indicated that the transmissivity of the thermal aquifer is very, very high. Five water samples were collected for chemical analyses during the course of CD-1 pump tests. The samples were collected to determine the water quality for the proposed space heating district and possible reinjection, and to establish a water chemistry base-line for comparative analysis of fluid chemistry during the course of the pumping and from subsequent development. 7 refs., 18 figs., 3 tabs.

  2. Multiaxial graphite test specimen

    SciTech Connect

    1988-09-01

    A multiaxial test program is to be conducted by Oak Ridge National Laboratory (ORNL) on the core component graphite. The objectives of the tests are to obtain failure data under uniaxial and biaxial states of stress in order to construct a failure surface in a two-dimensional stress space. These data will be used in verifying the accuracy of the maximum stress failure theory being proposed for use in designing the core graphite components. Tubular specimens are proposed to be used and are either loaded axially and/or subjected to internal pressure. This report includes a study on three specimen configurations. The conclusions of that study indicate that an elliptical transition geometry procedures the smallest discontinuity effects. Several loading combustions were studied using the elliptical transition specimen. The primary purpose is to establish the location of the highest stress state and its relation to the gage section for all of the loading conditions. The tension/internal pres sure loading condition (1:1) indicated that the high stress area is just outside the gage section but still should be acceptable. 5 refs., 18 figs.

  3. Scale length study in TFTR (Tokamak Fusion Test Reactor)

    SciTech Connect

    Hiroe, S.; Goldston, R.J.; Bitter, M.; Bush, C.E.; Efthimion, P.C.; Grek, B.; Johnson, D.W.; Murakami, M.; Schivell, J.; Towner, H.H.

    1988-12-01

    The scale lengths of the electron density (L/sub n//sub e/), temperature (L/sub T//sub e/), and pressure (L/sub p//sub e/) gradients were investigated during the 1985 operating period of the Tokamak Fusion Test Reactor (TFTR) for gas-fueled plasmas with neutral beam injection and movable limiter. Although the global energy confinement time degrades as the heating power increases or the plasma current decreases, the radial profiles of the scale lengths (L/sub T//sub e/ and L/sup p//sub e/) remain unchanged. Especially, the electron pressure profile is constrained not to change. This trend appears to hold over a fairly wide range of TFTR operational regimes. The radial profiles of L/sub n//sub e/ and /eta//sub e/ (= L/sub n//sub e//L/sub T//sub e/) also appear to remain unchanged, although the uncertainties of the experimental data for these quantities are greater than those for L/sub T//sub e/ and L/sub p//sub e/. The experimental parameters are used to evaluate theoretical predictions of the electron thermal diffusivity, and the results are compared with the empirical thermal diffusivity. 34 refs., 18 figs., 2 tabs.

  4. Advanced Materials Development Program: Ceramic Technology for Advanced Heat Engines program plan, 1983--1993

    SciTech Connect

    Not Available

    1990-07-01

    The purpose of the Ceramic Technology for Advanced Heat Engines (CTAHE) Project is the development of an industrial technology base capable of providing reliable and cost-effective high temperature ceramic components for application in advanced heat engines. There is a deliberate emphasis on industrial'' in the purpose statement. The project is intended to support the US ceramic and engine industries by providing the needed ceramic materials technology. The heat engine programs have goals of component development and proof-of-concept. The CTAHE Project is aimed at developing generic basic ceramic technology and does not involve specific engine designs and components. The materials research and development efforts in the CTAHE Project are focused on the needs and general requirements of the advanced gas turbine and low heat rejection diesel engines. The CTAHE Project supports the DOE Office of Transportation Systems' heat engine programs, Advanced Turbine Technology Applications (ATTAP) and Heavy Duty Transport (HDT) by providing the basic technology required for development of reliable and cost-effective ceramic components. The heat engine programs provide the iterative component design, fabrication, and test development logic. 103 refs., 18 figs., 11 tabs.

  5. Bias in peak clad temperature predictions due to uncertainties in modeling of ECC bypass and dissolved non-condensable gas phenomena

    SciTech Connect

    Rohatgi, U.S.; Neymotin, L.Y.; Jo, J.; Wulff, W. )

    1990-09-01

    This report describes a general method for estimating the effect on the Reflood Phase PCT from systematic errors (biases) associated with the modelling of the ECCS and dissolved nitrogen, and the application of this method in estimating biases in the Reflood Phase PCT (second PCT) predicted by the TRAC/PF1/MOD1, Version 14.3. The bias in the second PCT due to the uncertainty in the existing code models for ECCS related phenomena is {minus}19{degree}K ({minus}34{degree}F). The negative bias implies that the code models for this phenomena are conservative. The bias in the second PCT due to the lack of modelling of dissolved N{sub 2} in the code is estimated to be 9.9{degree}K (17.8{degree}F). The positive bias implies that the absence of dissolved N{sub 2} model makes the code prediction of PCT non-conservative. The bias estimation in this report is a major exception among all other uncertainty and bias assessments performed in conjunction with the CSAU methodology demonstration, because this bias estimation benefitted from using full-scale test data from the full-scale Upper Plenum Test Facility (UPTF). Thus, the bias estimates presented here are unaffected by scale distortions in test facilities. Data from small size facilities were also available and an estimate of bias based on these data will be conservative. 35 refs., 18 figs., 5 tabs.

  6. Northwest Hazardous Waste Research, Development, and Demonstration Center: Program Plan. [Contains glossary

    SciTech Connect

    Not Available

    1988-02-01

    The Northwest Hazardous Waste Research, Development, and Demonstration Center was created as part of an ongoing federal effort to provide technologies and methods that protect human health and welfare and environment from hazardous wastes. The Center was established by the Superfund Amendments and Reauthorization Act (SARA) to develop and adapt innovative technologies and methods for assessing the impacts of and remediating inactive hazardous and radioactive mixed-waste sites. The Superfund legislation authorized $10 million for Pacific Northwest Laboratory to establish and operate the Center over a 5-year period. Under this legislation, Congress authorized $10 million each to support research, development, and demonstration (RD and D) on hazardous and radioactive mixed-waste problems in Idaho, Montana, Oregon, and Washington, including the Hanford Site. In 1987, the Center initiated its RD and D activities and prepared this Program Plan that presents the framework within which the Center will carry out its mission. Section 1.0 describes the Center, its mission, objectives, organization, and relationship to other programs. Section 2.0 describes the Center's RD and D strategy and contains the RD and D objectives, priorities, and process to be used to select specific projects. Section 3.0 contains the Center's FY 1988 operating plan and describes the specific RD and D projects to be carried out and their budgets and schedules. 9 refs., 18 figs., 5 tabs.

  7. Testing the effectiveness of mobile home weatherization measures in a controlled environment: The SERI CMFERT (Collaborative Manufactured Buildings Facility for Energy Research and Training) Project

    SciTech Connect

    Judkoff, R.D.; Hancock, C.E.; Franconi, E.

    1990-03-01

    For several years the Solar Energy Research Institute has been testing the effectiveness of mobile home weatherization measures, with the support of the US DOE Office of State and Local Assistance Programs Weatherization Assistance Program, the DOE Office of Buildings and Community Systems, the seven states within the federal Weatherization Region 7, the Colorado Division of Housing, and the DOE Denver Support Office. During the winter of 1988--89, several weatherization measures were thermally tested on three mobile homes under controlled conditions inside a large environmental enclosure. The effects of each weatherization measure on conduction losses, infiltration losses, and combined furnace and duct-delivered heat efficiency were monitored. The retrofit options included air sealing, duct repair, furnace tune-up, interior storm panels, floor insulation, and roof insulation. The study demonstrated that cost-effective heating energy savings of about 20% to 50% are possible if weatherization techniques adapted to the special construction details in mobile homes are applied. 24 refs., 18 figs., 9 tabs.

  8. Remote installation of risers on underground nuclear waste storage tanks

    SciTech Connect

    Jackson, J.P.; Gessner, R.F.

    1988-03-01

    The West Valley Demonstration Project was established to solidify 2120 m/sup 3/ (560,000) gallons of high-level nuclear waste generated during six years of commercial nuclear fuel reprocessing. This liquid will be processed to remove radioactive elements which, with the remaining sludge, will be combined with glass formers and be converted into borosilicate glass. Risers were installed on the high-level tank for installation of pumps which will be used to remove the liquid and sludge. The extensive use of remote technology was required to install the risers and to minimize operator exposure to high levels of radiation and contamination. The riser installation required remotely: drilling through two feet of concrete shielding; installing pump access pipes which are welded to the tank top; and cutting holes in tanks located 3658 mm (12) feet below ground. These operations were successfully completed 13 times without exposing personnel to high-level radiation or contamination. Specially designed remote equipment was developed for each step of this operation. Extensive operator training in the use of this equipment was performed on a tank with low radiation prior to work on the high-level tank. This paper discusses the application of remote technology that assured a quality job was safely accomplished. 3 refs., 18 figs., 2 tabs.

  9. Theory of bulk and interface constant phase elements in electrode- electrolyte systems

    SciTech Connect

    Liu, S.H.

    1991-01-01

    This paper summarizes the progress gained in the last few years in our understanding of bulk and interface constant-phase-angle (CPA) behavior in electrode-electrolyte systems. It is now fairly well established that the interface constant-phase element originates from the fractal nature of the interface. The complex geometry gives rise to a fractal distribution of parallel current paths, and the competition between these paths results in the fractional power law behavior of the impedance across the interface. On the other hand, the early hope of relating the CPA exponent to the fractal dimension of the interface has been shown to be unattainable. Our understanding of the bulk CPA behavior, which is most prevalent in solid electrolytes, is only tentative. It is illustrated using a simple model that, under nonlinear dynamical laws that govern the flow of ions in the electrolyte, a current in the solid can generate a fractal distribution of vacancies which tend to impede the flow. The current is forced to negotiate a complex path through the solid, and the resulting fluctuation in path length and flow rate could be a source of the CPA behavior. 32 refs., 18 figs.

  10. Ceramic fabrication R D

    SciTech Connect

    Not Available

    1990-01-01

    This project is separated into three tasks. The first task is a design and modeling effort to be carried out by MSE, Inc. The purpose of this task is to develop and analyze designs for various cohesive ceramic fabrication (CCF) components. This quarter, the advanced molybdenum disicilide MHD electrode design was essentially completed. Final refinements will be made after molybdenum disilicide processing results are available and the final layer compositions are established. Work involving whisker incorporation was initiated on the high stress component. It is unlikely that whiskers will become low cost, so particulate reinforcement will be pursued. Modeling work will resume once a suitable aluminum oxide/silicon carbide composition is selected that can be fired to acceptable densities by pressureless sintering. Task 2, subcontracted to Applied Technology Laboratories (ATL), is principally directed at establishing a property data base for monolithic and laminated alumina fabricated using the CCF process. This quarter, ATL demonstrated that the CCF process does not compromise the flexure strength of alumina. Task 3, subcontracted to Ceramics Binder Systems, Inc., focused on CCF silicon carbide particulate reinforced alumina and on the development of processing procedures for nonoxide molybdenum disilicide. Preliminary results indicate that achieving high densities in silicon carbide particulate reinforced aluminum oxide will be difficult. Molybdenum disilicide results are encouraging, and it is clear that the CCF process will work with this nonoxide material. 3 refs., 18 figs., 4 tabs.

  11. Material selection for electrooptic deflectors

    SciTech Connect

    Not Available

    1988-09-01

    The selection of a material for a practical device is generally guided by a number of criteria, including cost, size, difficulty of fabrication, durability, driver requirements, and system constraints. A quantitative analysis can usually be made for comparison, or a figure of merit can be computed. In the case of materials for electrooptical (EO) devices the choice is often made based on the availability of materials meeting some minimum system requirement. For fast EO deflectors, where a large number of resolvable spots is required, the choice of materials is quite limited. A model of just such a device is proposed; it is based on the resolution of 400 spots and reasonable boundary conditions. The model predicts that to be successful, an EO material must be chosen that has a linear EO coefficient (r/sub 33/) of at least 336 pm/V. A survey was conducted of the EO materials which are generally available. Based on the model and the survey, Czochralski crystal growth of strontium barium niobate (SBN:60) is recommended. Although SBN:60 does not have the largest EO coefficient, it may be the easiest to grow in the required size and optical quality, thus satisfying the availability criterion. It should be borne in mind that many materials may be grown by this technique and there are many new and potential applications for EO materials. 92 refs., 18 figs., 14 tabs.

  12. Metallic phase-change materials for solar dynamic energy storage systems

    SciTech Connect

    Lauf, R.J.; Hamby, C. Jr.

    1990-12-01

    Solar (thermal) dynamic power systems for satellites require a heat storage system that is capable of operating the engine during eclipse. The conventional approach to this thermal storage problem is to use the latent heat of fluoride salts, which would melt during insolation and freeze during eclipse. Although candidate fluorides have large heats of fusion per unit mass, their poor thermal conductivity limits the rate at which energy can be transferred to and from the storage device. System performance is further limited by the high parasitic mass of the superalloy canisters needed to contain the salt. This report describes a new thermal storage system in which the phase-change material (PCM) is a metal (typically germanium) contained in modular graphite canisters. These modules exhibit good thermal conductivity and low parasitic mass, and they are physically and chemically stable. Prototype modules have survived over 600 melt/freeze cycles without degradation. Advanced concepts to further improve performance are described. These concepts include the selection of ternary eutectic alloys to provide a wider range of useful melting temperatures and the use of infiltration to control the location of liquid alloy and to compensate for differences in thermal expansion. 13 refs., 18 figs.

  13. RAMONA-4B a computer code with three-dimensional neutron kinetics for BWR and SBWR system transient - user`s manual

    SciTech Connect

    Rohatgi, U.S.; Cheng, H.S.; Khan, H.J.; Mallen, A.N.; Neymotin, L.Y.

    1998-03-01

    This document is the User`s Manual for the Boiling Water Reactor (BWR), and Simplified Boiling Water Reactor (SBWR) systems transient code RAMONA-4B. The code uses a three-dimensional neutron-kinetics model coupled with a multichannel, nonequilibrium, drift-flux, phase-flow model of the thermal hydraulics of the reactor vessel. The code is designed to analyze a wide spectrum of BWR core and system transients. Chapter 1 gives an overview of the code`s capabilities and limitations; Chapter 2 describes the code`s structure, lists major subroutines, and discusses the computer requirements. Chapter 3 is on code, auxillary codes, and instructions for running RAMONA-4B on Sun SPARC and IBM Workstations. Chapter 4 contains component descriptions and detailed card-by-card input instructions. Chapter 5 provides samples of the tabulated output for the steady-state and transient calculations and discusses the plotting procedures for the steady-state and transient calculations. Three appendices contain important user and programmer information: lists of plot variables (Appendix A) listings of input deck for sample problem (Appendix B), and a description of the plotting program PAD (Appendix C). 24 refs., 18 figs., 11 tabs.

  14. Heavy-Section Steel Technology Program fracture issues

    SciTech Connect

    Pennell, W.E.

    1991-01-01

    Large-scale fracture mechanics tests have resulted in the identification of a number of fracture-technology issues. Identification of additional issues has come from the reactor vessel materials-irradiation test program and from reactor operating experience. This paper provides a review of fracture issues with an emphasis on their potential impact on a reactor vessel pressurized-thermal-shock (PTS) analysis. Mixed-mode crack propagation emerges as a major issue, due in large measure to the poor performance of existing models for the prediction of ductile tearing. Rectification of ductile tearing technology deficiencies may require extending the technology to include a more complete treatment of stress-state and loading history effects. The effect of cladding on vessel fracture remains uncertain to the point that it is not possible to determine at this time if the net effect will be positive or negative. Enhanced fracture toughness for shallow flaws has been demonstrated for low-strength structural steels. Demonstration of a similar effect in reactor pressure vessel steels could have a significant beneficial effect on the probabilistic analysis of reactor vessel fracture. Further development of existing fracture-mechanics models and concepts is required to meet the special requirements for fracture evaluation of circumferential flaws in the welds of ring-forged vessels. Fracture technology advances required to address the issues discussed in this paper are the major objective for the ongoing Heavy-Section Steel Technology (HSST) Program at Oak Ridge National Laboratory (ORNL). 22 refs., 18 figs.

  15. Competitive position of natural gas: Steel reheat applications: Topical report

    SciTech Connect

    Williams, J.H.; Koch, G.S.; McDermott, H.; Klareich, F.H.

    1986-08-01

    Natural gas is by far the preferred fuel for steel reheat applications, accounting for approximately 135 x 10/sup 12/ Btu per year of a 187 x 10/sup 12/ Btu per year total reheat fuels market based on 1984 production figures. However, changes in the steel industry over the next 20 years could substantially reduce the traditional steel reheat market and affect the competitiveness of present natural gas-fueled technologies. Process innovations such as hot charging, direct rolling, thin slab and thin strip casting, and powdered metals are being pursued by both mini-mill and integrated producers. Each of these processes reduce or eliminate the need for reheat. When reheat is needed, the process usually requires much less fuel, as well as an ability to rapidly reheat thin products in a continuous, lower-scale-loss reheat cycle than can be provided by conventional gas furnaces. Therefore, new gas-fired rapid heating technologies will need to be developed if gas is to remain competitive with electric induction systems that offer relatively fast and low-scale-loss reheat cycles. The changing structure of the steel industry will also affect the use of natural gas for reheat applications, as the domestic steel industry is downsized over the next few years. Also, the relative share of mini-mill production is expected to continue to grow, especially if mini-mills are able to capture part of the sheet market, which now represents 67% of integrated mill shipments. In comparison to integrated mills, mini-mills are more likely to adopt hot charging, direct rolling, thin steel casting, and other new technologies that minimize steel reheat needs. This study provides insights into the technological and important factors influencing the reheat future competitiveness of natural gas-fueled reheat furnaces. 59 refs., 19 figs., 38 tabs.

  16. Development of acoustic flow instruments for solid/gas pipe flows

    SciTech Connect

    Sheen, S.H.; Raptis, A.C.

    1986-05-01

    Two nonintrusive acoustic flow sensing techniques are reported. One technique, passive in nature, simply measures the bandpassed acoustic noise level produced by particle/particle and particle/wall collisions. The noise levels, given in true RMS voltages or in autocorrelations, show a linear relationship to particle velocity but increase with solid concentration. Therefore, the passive technique requires calibration and a separate measure of solid concentration before it can be used to monitor the particle velocity. The second technique is based on the active cross-correlation principle. It measures particle velocity directly by correlating flow-related signatures at two sensing stations. The velocity data obtained by this technique are compared with measurements by a radioactive-particle time-of-flight (TOF) method. A multiplier of 1.53 is required to bring the acoustic data into agreement with the radioactive TOF result. The difference may originate from the difference in flow fields where particles are detected. The radioactive method senses particles mainly in the turbulent region and essentially measures average particle velocity across the pipe, while the acoustic technique detects particles near the pipe wall, and so measures the particle velocity in the viscous sublayer. Both techniques were tested in flows of limestone and air and 1-mm glass beads and air at the Argonne National Laboratory Solid/Gas Test Facility (SGFTF). The test matrix covered solid velocities of 20 to 30 m/s in a 2-in. pipe and solid-to-gas loading ratios of 6 to 22. 37 refs., 19 figs., 4 tabs.

  17. Theoretical effects of geomagnetic activity on thermospheric tides

    SciTech Connect

    Fesen, C.G.; Richmond, A.D.; Roble, R.G.

    1993-09-01

    The theoretical effects of auroral activity on thermospheric tides during equinox solar cycle minimum are investigated using simulations from the National Center for Atmospheric Research thermosphere-ionosphere general circulation model. One set of model runs examined the effects of increasing levels of geomagnetic activity on the neutral horizontal winds and temperatures. A second set of model runs examined the generation of diurnal and semidiurnal waves in the neutral horizontal winds and temperatures by solar forcing, auroral forcing, and waves propagating vertically from the lower atmosphere. The model simulations were made for four levels of geomagnetic activity, parameterized principally by the total hemispheric power index and the potential drop across the polar cap. The resulting neutral horizontal wind and temperature fields were examined at geographic latitudes of 17.5{degrees}N, 42.5{degrees}N, and 67.5{degrees}N at 70{degrees}W longitude. The modeled response to the level of geomagnetic activity varies with altitude and latitude: the effects tend to maximize at high altitudes and high latitudes and penetrate lower in altitude as geomagnetic activity increases. The simulated mean temperatures increase and the mean winds become more southward and westward at all latitudes with increasing auroral activity. In the upper thermosphere, the model diurnal temperature amplitudes decrease with increasing activity, while the diurnal meridional wind amplitudes increase. The modeled semidiurnal winds are strongly affected by the level of geomagnetic activity, while the semidiurnal temperatures are not. Analysis of the second set of model simulations focusing on the generation of the tidal waves indicates that the tidal response to auroral activity is largely determined by the interference between the waves due to upward propagating tides and in situ solar forcing and those generated by the auroral momentum and energy sources. 28 refs., 19 figs.

  18. Analysis of capsule HFR-B1 graphite-corrosion data

    SciTech Connect

    Richards, M.B.; Gillespie, A.G.

    1991-01-01

    The recently completed irradiation of capsule HFR-B1 in the high-flux reactor at the Pitten Establishment in The Netherlands provided some excellent data for fission-product release. The data were obtained under irradiation and temperature conditions close to those expected during normal operation of the Modular High-Temperature Gas-cooled Reactor (MHTGR). Some of the tests at Petten were designed to measure release of fission gases during hydrolysis of failed fuel. Hydrolysis was initiated by injecting known amounts of water vapor into the capsule sweep gas. The measured concentrations of CO and CO{sub 2} in the capsule sweep gas indicated that a non-negligible amount of graphite corrosion was also occurring during the hydrolysis tests. Hence, these measurements provide some unique data for in-pile corrosion of grade H-4541 graphite by steam. In the present report, an analysis of graphite corrosion during the Petten hydrolysis tests is described. The calculations were performed using the REACT program, which is based on an improved corrosion model. The REACT program was developed as part of a research program at the University of California, San Diego, and is in operational status in the General Atomics (GA) Production Code Library. Predictions obtained with REACT show excellent agreement with the Petten graphite-corrosion data. This good agreement indicates that the currently used correlation for the steam-graphite reaction rate, which was obtained from out-of-pile measurements, may also be used to predict in-pile corrosion with good accuracy. 8 refs., 19 figs., 2 tabs.

  19. Modeling the surface heat flux response to long-lived SST anomalies in the North Atlantic

    SciTech Connect

    Power, S.B.; Kleeman, R.; Colman, R.A.

    1995-09-01

    An atmospheric general circulation model (AGCM), a simplified atmospheric model (SAM) of surface heat flux, and various idealized analytic models have been used to investigate the atmospheric response over the North Atlantic to SST anomalies, including a general cooling associated with a weakened thermohaline circulation. Latent heating dominates the surface heat flux response, while sensible heating plays an important secondary role. The total heat flux response is weaker than presumed in recent studies using ocean models under highly idealized surface boundary conditions. This implies that stability of the thermohaline circulation to high-latitude freshening in more sophisticated coupled systems (that incorporate either AGCMs or models like SAM) will be increased. All three kinds of atmospheric models exhibit nonrestorative behavior away from the anomaly peak that is primarily associated with the advection of cooled air eastward. This simple picture is complicated in the AGCM by the fact that the winds weaken over the SST anomaly, which helps to moderate the response. Analytic models for atmospheric temperature forced using imposed surface temperature anomalies highlight conditions under which a nonrestorative response can arise. Previous work has shown that the length scale of spatially periodic anomalies partially determines the magnitude of the response in a diffusive atmosphere. Here the authors show that this scale dependence has much wider applicability by considering more localized anomalies and by the inclusion of advective transport processes. The modification of the response by sea ice changes and the absence of any statistically significant change in the basin-averaged hydrological cycle are also discussed. 62 refs., 19 figs.

  20. Late Pleistocene landslide-dammed lakes along the Rio Grande, White Rock Canyon, New Mexico

    SciTech Connect

    Reneau, S.L.; Dethier, D.P.

    1996-11-01

    Massive slump complexes composed of Pliocene basaltic rocks and underlying Miocene and Pliocene sediments flank the Rio Grande along 16 km of northern White Rock Canyon, New Mexico. The toe area of at least one slump complex was active in the late Pleistocene, damming the Rio Grande at least four times during the period from 18 to 12 {sup 14}C ka and impounding lakes that extended 10-20 km upriver. Stratigraphic relationships and radiocarbon age constraints indicate that three separate lakes formed between 13.7 and 12.4 {sup 14}C ka. The age and dimensions of the ca. 12.4 ka lake are best constrained; it had an estimated maximum depth of {approx}30 m, a length of {approx}13 km, a surface area of {approx}2.7 km{sup 2}, and an initial volume of {approx}2.5 x 10{sup 7} m{sup 3}. The youngest landslide-dammed lakes formed during a period of significantly wetter regional climate, strongly suggesting that climate changes were responsible for reactivation of the slump complexes. We are not certain about the exact triggering mechanisms for these landslides, but they probably involved removal of lateral support due to erosion of the slope base by the Rio Grande during periods of exceptionally high flood discharge or rapid incision; increased pore pressures associated with higher water tables; higher seepage forces at sites of ground-water discharge; or some combination of these processes. Seismic shaking could also have contributed to triggering of some of the landslides, particularly if aided by wet antecedent conditions. 54 refs., 19 figs., 3 tabs.