Science.gov

Sample records for 17kw downflow laboratory

  1. HAZARDOUS WASTE INCINERATION: THE IN-SITU CAPTURE OF LEAD BY SORBENTS IN A LABORATORY DOWNFLOW COMBUSTOR

    EPA Science Inventory

    The paper discusses experiments on a 17-kW downflow combustor to determine how sorbent injection into the postflame influenced the particle size distribution of a lead (Pb) aerosol formed from a surrogate Pb-containing waste. n the absence of chlorine (CI), the Pb aerosol size di...

  2. Downflow limestone beds for treatment of net-acidic, oxic, iron-laden drainage from a flooded anthracite mine, Pennsylvania, USA: 2. Laboratory evaluation

    USGS Publications Warehouse

    Cravotta, C.A.; Ward, S.J.; Hammarstrom, J.M.

    2008-01-01

    Acidic mine drainage (AMD) containing elevated concentrations of dissolved iron and other metals can be neutralized to varying degrees by reactions with limestone in passive treatment systems. We evaluated the chemical and mineralogical characteristics and the effectiveness of calcitic and dolomitic limestone for the neutralization of net-acidic, oxic, iron-laden AMD from a flooded anthracite mine. The calcitic limestone, with CaCO3 and MgCO3 contents of 99.8 and <0.1 wt%, respectively, and the dolomitic limestone, with CaCO3 and MgCO3 contents of 60.3 and 40.2 wt%, were used to construct a downflow treatment system in 2003 at the Bell Mine, a large source of AMD and baseflow to the Schuylkill River in the Southern Anthracite Coalfield, in east-central Pennsylvania. In the winter of 2002-2003, laboratory neutralization-rate experiments evaluated the evolution of effluent quality during 2 weeks of continuous contact between AMD from the Bell Mine and the crushed calcitic or dolomitic limestone in closed, collapsible containers (cubitainers). The cubitainer tests showed that: (1) net-alkaline effluent could be achieved with detention times greater than 3 h, (2) effluent alkalinities and associated dissolution rates were equivalent for uncoated and Fe(OH)3-coated calcitic limestone, and (3) effluent alkalinities and associated dissolution rates for dolomitic limestone were about half those for calcitic limestone. The dissolution rate data for the cubitainer tests were used with data on the volume of effuent and surface area of limestone in the treatment system at the Bell Mine to evaluate the water-quality data for the first 1.5 years of operation of the treatment system. These rate models supported the interpretation of field results and indicated that treatment benefits were derived mainly from the dissolution of calcitic limestone, despite a greater quantity of dolomitic limestone within the treatment system. The dissolution-rate models were extrapolated on a

  3. SUPERSONIC DOWNFLOWS IN A SUNSPOT LIGHT BRIDGE

    SciTech Connect

    Louis, Rohan E.; Mathew, Shibu K.; Venkatakrishnan, P.; Bellot Rubio, Luis R.

    2009-10-10

    We report the discovery of supersonic downflows in a sunspot light bridge using measurements taken with the spectropolarimeter onboard the Hinode satellite. The downflows occur in small patches close to regions where the vector magnetic field changes orientation rapidly, and are associated with anomalous circular polarization profiles. An inversion of the observed Stokes spectra reveals velocities of up to 10 km s{sup -1}, making them the strongest photospheric flows ever measured in light bridges. Some (but not all) of the downflowing patches are cospatial and cotemporal with brightness enhancements in chromospheric Ca II H filtergrams. We suggest that these flows are due to magnetic reconnection in the upper photosphere/lower chromosphere, although other mechanisms cannot be ruled out.

  4. A DROPLET MODEL OF QUIESCENT PROMINENCE DOWNFLOWS

    SciTech Connect

    Haerendel, G.; Berger, T.

    2011-04-20

    Observations of quiescent prominences with the Solar Optical Telescope on the Hinode satellite have revealed the ubiquitous existence of downflows forming coherent thin and highly structured vertically oriented threads with velocities between 10 and 20 km s{sup -1}. Their widths range between 300 and 500 km. They are often initiated at the top of the visible prominence, but sometimes also at intermediate level. We propose that the downflows are made of plasma packets that squeeze themselves through the dominantly horizontal field under the action of gravity. Their origin is assumed to be hot plasma supplied from either inside or the immediate vicinity of the prominence and condensing at its top. Under compression and further cooling, the matter overflows to the flanks of the prominence dragging its magnetic field with it. Under the increasing action of gravity, vertical structures are forming which eventually disconnect from the field of the inflow channel thus forming finite plasma packets. This process is reminiscent of water flowing over a mountain ridge and breaking up into a multitude of droplets. Like water droplets being subject to air drag, the falling plasma droplets experience a drag force by the horizontal prominence field and assume a steady vertical velocity. This happens via the excitation of Alfven waves. Lateral confinement by the prominence field determines their spatial extent. The small scales of the droplets and the directional balance of their internal tangled magnetic fields can explain the absence of appreciable vertical components in magnetic field measurements. On the basis of the observed width and vertical speed of the downflows and by adopting a prominence field of about 8 G, we derive central density and temperature of the droplets, which turn out to be quite consistent with known prominence characteristics. In the formulation of the drag force a dimensionless 'magnetic drag coefficient' has been introduced with a value well below unity.

  5. Numerical Modeling of Supra-Arcade Downflows

    NASA Astrophysics Data System (ADS)

    Huang, Y. M.; Bhattacharjee, A.; Guo, L.; Innes, D.

    2015-12-01

    Abstract Supra-arcade downflows (SADs) are elongated features usually observed above post-eruption flare arcades, with low emission, low density, and high temperature. Although SADs have been observed and studied extensively, their physical interpretation and mechanism remain not well understood and controversial. In our recent numerical and observational studies, we suggest that SADs may be due to Rayleigh-Taylor type instabilities occurring at the front of reconnection outflow jets as they encounter the underlying arcades (Innes et al. Astrophys. J. 796, 27; Guo et al. Astrophys. J. Lett., 796, L29). In this work, we further improve our three-dimensional magnetohydrodynamic model of SADs by incorporating viscous and resistive heating, anisotropic heat conduction, as well as line-tied lower boundary conditions. Synthetic SDO AIA emission measure profiles are calculated from simulation data and compared with observations.

  6. SUPERSONIC DOWNFLOWS AT THE UMBRA-PENUMBRA BOUNDARY OF SUNSPOTS

    SciTech Connect

    Louis, Rohan E.; Mathew, Shibu K.; Venkatakrishnan, P.; Bellot Rubio, Luis R.

    2011-01-20

    High-resolution spectropolarimetric observations of three sunspots taken with Hinode demonstrate the existence of supersonic downflows at or close to the umbra-penumbra boundary which have not been reported before. These downflows are confined to large patches, usually encompassing bright penumbral filaments, and have lifetimes of more than 14 hr. The presence of strong downflows in the center-side penumbra near the umbra rules out an association with the Evershed flow. Chromospheric filtergrams acquired close to the time of the spectropolarimetric measurements show large, strong, and long-lived brightenings in the neighborhood of the downflows. The photospheric intensity also exhibits persistent brightenings comparable to the quiet Sun. Interestingly, the orientation of the penumbral filaments at the site of the downflows is similar to that resulting from the reconnection process described by Ryutova et al. The existence of such downflows in the inner penumbra represents a challenge for numerical models of sunspots because they have to explain them in terms of physical processes likely affecting the chromosphere.

  7. Supersonic Downflows at the Umbra-Penumbra Boundary of Sunspots

    NASA Astrophysics Data System (ADS)

    Louis, Rohan E.; Bellot Rubio, Luis R.; Mathew, Shibu K.; Venkatakrishnan, P.

    2011-01-01

    High-resolution spectropolarimetric observations of three sunspots taken with Hinode demonstrate the existence of supersonic downflows at or close to the umbra-penumbra boundary which have not been reported before. These downflows are confined to large patches, usually encompassing bright penumbral filaments, and have lifetimes of more than 14 hr. The presence of strong downflows in the center-side penumbra near the umbra rules out an association with the Evershed flow. Chromospheric filtergrams acquired close to the time of the spectropolarimetric measurements show large, strong, and long-lived brightenings in the neighborhood of the downflows. The photospheric intensity also exhibits persistent brightenings comparable to the quiet Sun. Interestingly, the orientation of the penumbral filaments at the site of the downflows is similar to that resulting from the reconnection process described by Ryutova et al. The existence of such downflows in the inner penumbra represents a challenge for numerical models of sunspots because they have to explain them in terms of physical processes likely affecting the chromosphere.

  8. LATERAL DOWNFLOWS IN SUNSPOT PENUMBRAL FILAMENTS AND THEIR TEMPORAL EVOLUTION

    SciTech Connect

    Esteban Pozuelo, S.; Rubio, L. R. Bellot; Rodríguez, J. de la Cruz

    2015-04-20

    We study the temporal evolution of downflows observed at the lateral edges of penumbral filaments in a sunspot located very close to the disk center. Our analysis is based on a sequence of nearly diffraction-limited scans of the Fe i 617.3 nm line taken with the CRisp Imaging Spectro-Polarimeter instrument at the Swedish 1 m Solar Telescope. We compute Dopplergrams from the observed intensity profiles using line bisectors and filter the resulting velocity maps for subsonic oscillations. Lateral downflows appear everywhere in the center-side penumbra as small, weak patches of redshifts next to or along the edges of blueshifted flow channels. These patches have an intermittent life and undergo mergings and fragmentations quite frequently. The lateral downflows move together with the hosting filaments and react to their shape variations, very much resembling the evolution of granular convection in the quiet Sun. There is a good relation between brightness and velocity in the center-side penumbra, with downflows being darker than upflows on average, which is again reminiscent of quiet Sun convection. These results point to the existence of overturning convection in sunspot penumbrae, with elongated cells forming filaments where the flow is upward but very inclined, and weak lateral downward flows. In general, the circular polarization profiles emerging from the lateral downflows do not show sign reversals, although sometimes we detect three-lobed profiles that are suggestive of opposite magnetic polarities in the pixel.

  9. Lateral Downflows in Sunspot Penumbral Filaments and their Temporal Evolution

    NASA Astrophysics Data System (ADS)

    Esteban Pozuelo, S.; Bellot Rubio, L. R.; de la Cruz Rodríguez, J.

    2015-04-01

    We study the temporal evolution of downflows observed at the lateral edges of penumbral filaments in a sunspot located very close to the disk center. Our analysis is based on a sequence of nearly diffraction-limited scans of the Fe i 617.3 nm line taken with the CRisp Imaging Spectro-Polarimeter instrument at the Swedish 1 m Solar Telescope. We compute Dopplergrams from the observed intensity profiles using line bisectors and filter the resulting velocity maps for subsonic oscillations. Lateral downflows appear everywhere in the center-side penumbra as small, weak patches of redshifts next to or along the edges of blueshifted flow channels. These patches have an intermittent life and undergo mergings and fragmentations quite frequently. The lateral downflows move together with the hosting filaments and react to their shape variations, very much resembling the evolution of granular convection in the quiet Sun. There is a good relation between brightness and velocity in the center-side penumbra, with downflows being darker than upflows on average, which is again reminiscent of quiet Sun convection. These results point to the existence of overturning convection in sunspot penumbrae, with elongated cells forming filaments where the flow is upward but very inclined, and weak lateral downward flows. In general, the circular polarization profiles emerging from the lateral downflows do not show sign reversals, although sometimes we detect three-lobed profiles that are suggestive of opposite magnetic polarities in the pixel.

  10. On the instability of a buoyancy-driven downflow

    NASA Astrophysics Data System (ADS)

    Dai, Albert

    2015-09-01

    Gravity currents flowing downslope, namely downflows, were observed to have a larger scale instability on high slope angles and such violent instability was absent for downflows on low slope angles. By linear theory, it is found that two branches of instability occur for slope angle in the range of 0° < θ < 90°. The ensuing instability is on the upper branch for low slope angles and on the lower branch for high slope angles. There also exists a transitional slope angle, θE ≈ 0.04°, at which the onset instability switches from one branch to the other. The scale of instability is found to increase and tend to skew towards the upper edge of the downflow as the ensuing instability switches from the upper branch to the lower one. Our findings surprisingly resonate with previously reported observations. Critical Reynolds number, below which the flow is stable to infinitesimal disturbances, is found to increase as the slope angle decreases. The role played by the bottom slope is essentially twofold. On one hand, the downslope component of gravity acts as the driving force for downflows. On the other hand, the wall-normal component of gravity acts for the stratification effect. Therefore, as the slope angle decreases, the driving force diminishes and the stratification intensifies, which can explain that the critical Reynolds number increases as the slope angle decreases. When a downflow propagates onto a sufficiently low slope angle, the low driving force and intensified stratification effect would make the downflow less prone to sustain a turbulent state of flow, which ultimately leads to the final stage of a gravity current event.

  11. Improved Accuracy for Two-Phase Downflow Scenarios

    SciTech Connect

    Cliff B. Davis

    2012-10-01

    Problems have been reported for very high downflows in small and intermediate pipes in the bubbly and slug flow regimes. When the flow rate is near critical, the calculated mass flow rate depends strongly on the flow orientation for small and intermediate pipes, whereas the flow rate is nearly independent of flow direction for large pipes. At very high flow rates, the flow is expected to be nearly homogenous and hence to be nearly independent of flow direction. The flow rates calculated by RELAP5-3D agree with this expectation except for downflow in small and intermediate pipes, where the calculated flows in the downward direction are about 20% lower than the flows in the upward and horizontal directions. The problem was traced to an extrapolation of the EPRI drift flux correlation beyond the range of its database. The problem was corrected by creating a very high downflow regime. The EPRI correlation is replaced by the Zuber-Findlay churn turbulent and Kataoka-Ishii drift flux correlations in the very high downflow regime for small and intermediate pipes.

  12. Method of producing gaseous products using a downflow reactor

    SciTech Connect

    Cortright, Randy D; Rozmiarek, Robert T; Hornemann, Charles C

    2014-09-16

    Reactor systems and methods are provided for the catalytic conversion of liquid feedstocks to synthesis gases and other noncondensable gaseous products. The reactor systems include a heat exchange reactor configured to allow the liquid feedstock and gas product to flow concurrently in a downflow direction. The reactor systems and methods are particularly useful for producing hydrogen and light hydrocarbons from biomass-derived oxygenated hydrocarbons using aqueous phase reforming. The generated gases may find used as a fuel source for energy generation via PEM fuel cells, solid-oxide fuel cells, internal combustion engines, or gas turbine gensets, or used in other chemical processes to produce additional products. The gaseous products may also be collected for later use or distribution.

  13. Magnetic loops, downflows, and convection in the solar corona

    NASA Technical Reports Server (NTRS)

    Foukal, P.

    1978-01-01

    Optical and extreme-ultraviolet observations of solar loop structures show that flows of cool plasma from condensations near the loop apex are a common property of loops associated with radiations whose maximum temperature is greater than approximately 7000 K and less than approximately 3,000,000 K. It is suggested that the mass balance of these structures indicates reconnection by means of plasma motion across field lines under rather general circumstances (not only after flares). It is shown that the cool material has lower gas pressure than the surrounding coronal medium. The density structure of the bright extreme ultraviolet loops suggests that downflows of cool gas result from isobaric condensation of plasma that is either out of thermal equilibrium with the local energy deposition rate into the corona, or is thermally unstable. The evidence is thought to indicate that magnetic fields act to induce a pattern of forced convection.

  14. Down-flow moving-bed gasifier with catalyst recycle

    DOEpatents

    Halow, John S.

    1999-01-01

    The gasification of coal and other carbonaceous materials by an endothermic gasification reaction is achieved in the presence of a catalyst in a down-flow, moving-bed gasifier. Catalyst is removed along with ash from the gasifier and is then sufficiently heated in a riser/burner by the combustion of residual carbon in the ash to volatilize the catalyst. This volatilized catalyst is returned to the gasifier where it uniformly contacts and condenses on the carbonaceous material. Also, the hot gaseous combustion products resulting from the combustion of the carbon in the ash along with excess air are introduced into the gasifier for providing heat energy used in the endothermic reaction.

  15. Down-flow moving-bed gasifier with catalyst recycle

    DOEpatents

    Halow, J.S.

    1999-04-20

    The gasification of coal and other carbonaceous materials by an endothermic gasification reaction is achieved in the presence of a catalyst in a down-flow, moving-bed gasifier. Catalyst is removed along with ash from the gasifier and is then sufficiently heated in a riser/burner by the combustion of residual carbon in the ash to volatilize the catalyst. This volatilized catalyst is returned to the gasifier where it uniformly contacts and condenses on the carbonaceous material. Also, the hot gaseous combustion products resulting from the combustion of the carbon in the ash along with excess air are introduced into the gasifier for providing heat energy used in the endothermic reaction. 1 fig.

  16. Detection of convective downflows in a sunspot penumbra.

    PubMed

    Scharmer, G B; Henriques, V M J; Kiselman, D; de la Cruz Rodríguez, J

    2011-07-15

    The fine structure and dynamics of sunspots and the strong outflow in their outer filamentary part--the penumbra--have puzzled astronomers for more than a century. Recent theoretical models and three-dimensional numerical simulations explain the penumbral filaments and their radiative energy output as the result of overturning convection. Here, we describe the detection of ubiquitous, relatively dark downward flows of up to 1 kilometer per second (km/s) in the interior penumbra, using imaging spectropolarimetric data from the Swedish 1-meter Solar Telescope. The dark downflows are omnipresent in the interior penumbra, distinguishing them from flows in arched flux tubes, and are associated with strong (3 to 3.5 km/s) radial outflows. They are thus part of a penumbral convective flow pattern, with the Evershed flow representing the horizontal component of that convection. PMID:21636742

  17. Observations of Supersonic Downflows in a Sunspot Light Bridge as Revealed by Hinode

    NASA Astrophysics Data System (ADS)

    Louis, R. E.; Rubio, L. R. B.; Mathew, S. K.; Venkatakrishnan, P.

    2012-08-01

    Recent high resolution spectropolarimetric observations from Hinode detected the presence of supersonic downflows in a sunspot light bridge (Louis et al. 2009). These downflows occurred in localized patches, close to regions where the field azimuth changed by a large value. This apparent discontinuity in the field azimuth was seen along a thin ridge running along the western edge of the light bridge. Some, but not all, of these downflowing patches were co-spatial with chromospheric brightness enhancements seen in Ca II H filtergrams. The presence of magnetic inhomogeneities at scales of 0.″3 could facilitate the reconnection of field lines in the lower chromosphere whose signatures might be the supersonic downflows and the brightness enhancements that have been observed.

  18. Supra-Arcade Downflows: Observations and MHD Simulations

    NASA Astrophysics Data System (ADS)

    Guo, L.; Innes, D.; Bhattacharjee, A.; Huang, Y.

    2013-12-01

    Supra-arcade downflows (hereafter referred to as SADs) are low-emission, elongated features usually observed above post-eruption coronal arcades. Although SADs have been observed for decades, the mechanism for their formation remains unclear. It has been suggested that SADs are shrinking loops or wakes following shrinking loops in the exhaust region of magnetic reconnection. We have undertaken a detailed comparison between numerical simulation and observation to test these ideas. Using data from SDO/AIA, we study four flare events with SADs, and show distinct differences between reconnected loops and SADs. The observations also exhibit downward moving SADs intertwined with bright upward moving spikes. Whereas SADs are dark, hot voids, spikes are brighter, slightly cooler structures. In our high-Lundquist-number 3D resistive MHD simulations, we demonstrate that secondary ballooning/interchange instabilities develop in the downstream region of a reconnecting current sheet. The instability results in the formation of low-density coherent structures that resemble SADs, and high-density structures that look like the spikes. Comparison between the simulation results and observations suggests that secondary interchange/ballooning instabilities of reconnecting current sheets provide a plausible mechanism for the observed features of SADs and spikes.

  19. On the penetration of the 660 km phase change by mantle downflows

    NASA Technical Reports Server (NTRS)

    Bercovici, David; Schubert, Gerald; Tackley, Paul J.

    1993-01-01

    We present a simple analytic model of the interaction of cold convective downwelling currents with an endothermic phase change. The model describes the ponding and lateral spreading of downflows along the phase transition interface. A simple comparison of the vertical forces on the ponding material provides a necessary condition for a downflow to penetrate the phase boundary. This condition is fundamentally dependent on the geometry of the downflow. For planar downwellings, the model predicts a minimum ponding time before the structure can penetrate the phase boundary. For columnar (axisymmetric) downflows, there is no minimum time of spreading required before penetration can proceed. The model thus provides an explanation for the observation that in numerical models of three-dimensional convection with an endothermic phase change, cylindrical downflows penetrate the phase interface while planar ones do not. Since descending slabs in the Earth's mantle display a wide spectrum of geometries between planar and cylindrical (given various trench curvatures, as well as intersections of two or more subduction zones), this phenomenon may explain, in part, why some slabs appear to extend into the lower mantle while others are deflected at the 660 km discontinuity.

  20. HELIOSEISMIC SIGNATURE OF CHROMOSPHERIC DOWNFLOWS IN ACOUSTIC TRAVEL-TIME MEASUREMENTS FROM HINODE

    SciTech Connect

    Nagashima, Kaori; Sekii, Takashi; Kosovichev, Alexander G.; Zhao Junwei; Tarbell, Theodore D.

    2009-04-01

    We report on a signature of chromospheric downflows in two emerging flux regions detected by time-distance helioseismology analysis. We use both chromospheric intensity oscillation data in the Ca II H line and photospheric Dopplergrams in the Fe I 557.6 nm line obtained by Hinode/SOT for our analyses. By cross-correlating the Ca II oscillation signals, we have detected a travel-time anomaly in the plage regions; outward travel times are shorter than inward travel times by 0.5-1 minute. However, such an anomaly is absent in the Fe I data. These results can be interpreted as evidence of downflows in the lower chromosphere. The downflow speed is estimated to be below 10 km s{sup -1}. This result demonstrates a new possibility of studying chromospheric flows by time-distance analysis.

  1. Observations of Supersonic Downflows near the Umbra-Penumbra Boundary of Sunspots as Revealed by Hinode

    NASA Astrophysics Data System (ADS)

    Louis, R. E.; Bellot Rubio, L. R.; Mathew, S. K.; Venkatakrishnan, P.

    2012-05-01

    High resolution spectropolarimetric observations by Hinode have revealed the existence of supersonic downflows at the umbra-penumbra boundary of 3 sunspots (Louis et al. 2011). These downflows are observed to be co-spatial with bright penumbral filaments and occupy an area greater than 1.6 arcsec2. They are located at the center-side penumbra and have the same polarity as the sunspot which suggests that they are not associated with the Evershed flow. In this paper we describe the supersonic velocities observed in NOAA AR 10923 and discuss the photospheric as well as chromospheric brightenings that lie close to the downflowing areas. Our observations suggest that this phenomenon is driven by dynamic and energetic physical processes in the inner penumbra which affect the chromosphere, providing new constraints to numerical models of sunspots.

  2. A steady-state supersonic downflow in the transition region above a sunspot umbra

    NASA Astrophysics Data System (ADS)

    Straus, Thomas; Fleck, Bernhard; Andretta, Vincenzo

    2015-10-01

    We investigate a small-scale (~1.5 Mm along the slit), supersonic downflow of about 90 km s-1 in the transition region above the lightbridged sunspot umbra in AR 11836. The observations were obtained with the Interface Region Spectrograph (IRIS) on 2013 September 2 from 16:40 to 17:59 UT. The downflow shows up as redshifted "satellite" lines of the Si iv and O iv transition region lines and is remarkably steady over the observing period of nearly 80 min. The downflow is not visible in the chromospheric lines, which only show an intensity enhancement at the location of the downflow. The density inferred from the line ratio of the redshifted satellites of the O iv lines (Ne = 1010.6 ± 0.25 cm-3) is only a factor 2 smaller than the one inferred from the main components (Ne = 1010.95 ± 0.20 cm-3). Consequently, this implies a substantial mass flux (~5 × 10-7 g cm-2 s-1), which would evacuate the overlying corona on timescales close to 10 s. We interpret these findings as evidence of a stationary termination shock of a supersonic siphon flow in a cool loop that is rooted in the central umbra of the spot. The movie is available in electronic form at http://www.aanda.org

  3. Using Supra-Arcade Downflows as Probes of Particle Acceleration in Solar Flares

    NASA Technical Reports Server (NTRS)

    Savage, Sabrina

    2012-01-01

    Extracting information from coronal features above flares has become more reliable with the availability of increasingly higher spatial- and temporal-resolution data in recent decades. We are now able to sufficiently probe the region high above long-duration flaring active regions where reconnection is expected to be continually occurring. Flows in the supra-arcade region, first observed with Yohkoh/SXT, have been theorized to be associated with newly-reconnected outflowing loops. High resolution data appears to confirm these assertions. Assuming that these flows are indeed reconnection outflows, then the detection of those directed toward the solar surface (i.e. downflowing) should be associated with particle acceleration between the current sheet and the loop footpoints rooted in the chromosphere. RHESSI observations of highly energetic particles with respect to downflow detections could potentially constrain electron acceleration models. We provide measurements of these supra-arcade downflows (SADs) in relation to reconnection model parameters and present preliminary findings comparing the downflow timings with high-energy RHESSI lightcurves.

  4. Using Supra-Arcade Downflows as Probes of Electron Acceleration During Solar Flares

    NASA Technical Reports Server (NTRS)

    Savage, Sabrina L.

    2011-01-01

    Extracting information from coronal features above flares has become more reliable with the availability of increasingly higher spatial and temporal-resolution data in recent decades. We are now able to sufficiently probe the region high above long-duration flaring active regions where reconnection is expected to be continually occurring. Flows in the supra-arcade region, first observed with Yohkoh/SXT, have been theorized to be associated with newly-reconnected outflowing loops. High resolution data appears to confirm these assertions. Assuming that these flows are indeed reconnection outflows, then the detection of those directed toward the solar surface (i.e. downflowing) should be associated with particle acceleration between the current sheet and the loop footpoints rooted in the chromosphere. RHESSI observations of highly energetic particles with respect to downflow detections could potentially constrain electron acceleration models. I will discuss measurements of these supra-arcade downflows (SADs) in relation to reconnection model parameters and present preliminary findings comparing the downflow timings with high-energy RHESSI lightcurves.

  5. Passive treatment of acid mine drainage in down-flow limestone systems

    SciTech Connect

    Watzlaf, G.R.

    1997-12-31

    Passive down-flow systems, consisting of compost and/or limestone layers, may be well suited for treatment of acidic mine drainage containing ferric iron and/or aluminum. Two columns were constructed and operated in the laboratory. The first column simulated a downward, vertical-flow anaerobic wetland, also referred to as successive alkalinity-producing systems (SAPS), and has received mine drainage for 97 weeks. The 0.16-m diameter column was vertically oriented and (from bottom to top) consisted of a 0.30-m thick layer of limestone, a 0.76-m thick layer of spent mushroom compost, and 0.91 m of free standing water. Water flowed vertically downward through the system. A second column, filled with only limestone, received water from the same source as the first column. This limestone column contained a 1.06-m thick layer of limestone and 0.91 m of free standing water and has received water for 55 weeks. Actual acid mine drainage (pH = 3.1, acidity = 200 mg/L (as CaCO{sub 3}), SO{sub 4}{sup 2-} = 600 mg/L, Total Fe = 10 mg/L, Mn = 14 mg/L, and Al = 18 mg/L) was collected every two weeks from a nearby abandoned deep mine and applied to these columns at a rate of 3.8 mL/min. For the compost/limestone column, effluent pH remained above 6.2 (6.2-7.9); however, pH at a depth of 0.38 m in the compost (halfway) dropped to < 4 after 28 weeks (net acidic). At the bottom of the compost pH remained > 4.5 for all 97 weeks. Alkalinity was generated by a combination of limestone dissolution and sulfate reduction. Over the 97 week period, the column generated an average of 330 mg/L of alkalinity, mostly due to limestone dissolution. Bacterial sulfate reduction displayed an ever decreasing trend, initially accounting for more than 200 mg/L of alkalinity and after 40 weeks only accounting for about 50 mg/L.

  6. QUANTITATIVE EXAMINATION OF A LARGE SAMPLE OF SUPRA-ARCADE DOWNFLOWS IN ERUPTIVE SOLAR FLARES

    SciTech Connect

    Savage, Sabrina L.

    2011-04-01

    Sunward-flowing voids above post-coronal mass ejection flare arcades were first discovered using the soft X-ray telescope aboard Yohkoh and have since been observed with TRACE (extreme ultraviolet (EUV)), SOHO/LASCO (white light), SOHO/SUMER (EUV spectra), and Hinode/XRT (soft X-rays). Supra-arcade downflow (SAD) observations suggest that they are the cross-sections of thin flux tubes retracting from a reconnection site high in the corona. Supra-arcade downflowing loops (SADLs) have also been observed under similar circumstances and are theorized to be SADs viewed from a perpendicular angle. Although previous studies have focused on dark flows because they are easier to detect and complementary spectral data analysis reveals their magnetic nature, the signal intensity of the flows actually ranges from dark to bright. This implies that newly reconnected coronal loops can contain a range of hot plasma density. Previous studies have presented detailed SAD observations for a small number of flares. In this paper, we present a substantial SADs and SADLs flare catalog. We have applied semi-automatic detection software to several of these events to detect and track individual downflows thereby providing statistically significant samples of parameters such as velocity, acceleration, area, magnetic flux, shrinkage energy, and reconnection rate. We discuss these measurements (particularly the unexpected result of the speeds being an order of magnitude slower than the assumed Alfven speed), how they were obtained, and potential impact on reconnection models.

  7. Probing downflows in solar magnetic elements: the Fe II test

    NASA Astrophysics Data System (ADS)

    Bellot Rubio, L. R.; Ruiz Cobo, B.; Collados, M.

    1999-01-01

    In an attempt to assess the physical realism of the plage flux tube model derived by Bellot Rubio, Ruiz Cobo & Collados (\\cite{brc}, \\cite{bellot}) we extend its predictions to the Stokes V zero-crossing shifts of a number of Fe ii lines. For this analysis, accurate Fe ii central wavelengths are required. We have devised a procedure for bringing the available Fe ii laboratory wavelengths to the system of accurate Fe i wavelengths of Nave et al. (\\cite{nav}). It is shown that, relative to this system, the Fe ii system of Kurucz (\\cite{kur}) is shifted by 6.4 m Angstroms/ towards longer wavelengths. Some lines, however, are displaced by more than 10 m Angstroms/. Corrected central wavelengths have been used to extract the observed Stokes V zero-crossing shifts of 16 Fe ii lines. Comparison with the values resulting from the model of Bellot Rubio et al. (\\cite{brc}, \\cite{bellot}) suggests that the velocity gradients derived by these authors are esentially correct.

  8. Observations of a Steady-State Supersonic Downflow in the Transition Region above a Sunspot Umbra

    NASA Astrophysics Data System (ADS)

    Fleck, Bernhard; Straus, Thomas; Andretta, Vincenzo

    2015-04-01

    Sunspots have been an area of intense research ever since Hale's discovery of strong magnetic fields in these structures. Here we report on the detection of a particular sunspot phenomenon: a small-scale (~ 1.5 Mm), supersonic downflow of about 90 km/s in the transition region above a light-bridged sunspot umbra. The observations were obtained with the Interface Imaging Region Spectrograph (IRIS) on 2 September 2013 from 16:39 to 17:58 UT in the sunspot of AR 11836 near disk center. Slit length and width were 68” and 0.166”, respectively. The cadence of the time series was 3 s, with exposure times of 2 s. The observations comprise nine spectral windows: C II 1336, Fe XII 1349, Cl I 1352, O I 1356, Si IV 1394, Si IV 1403, NUV at 2786 and 2831, and Mg II h and k 2796. The spectral window containing the Si IV 1403 line also includes the O IV 1400, 1401, and 1405 lines, the last one blended with a S IV line. The downflow shows up as red-shifted, well-separated “satellite” lines of the Si IV and O IV transition region lines and is remarkably steady over the observing period of nearly 80 min. The satellite lines do not participate in the 3-min shock wave Doppler maneuvres of the main component. The downflow is not visible in the chromospheric lines, which only show an intensity enhancement at the location of the downflow. The density inferred from the line ratio of the redshifted satellites of the O IV lines (Ne=1010.5 ±0.3 cm-3) is only a factor 2.5 smaller than the one inferred from the main components (Ne=1010.9 ±0.2 cm-3). Consequently, this implies a substantial mass flux (~ 4×10-7 g cm-2 s-1), which would evacuate the overlying corona on time scales of the order of 10 s. We interpret these findings as evidence of a stationary termination shock of a supersonic siphon flow in a cool loop rooted in the central umbra of the spot. Such stationary shocks have been predicted for siphon flows in hot coronal loops by Noci (1981).

  9. Chaotic, subduction-like downflows in a spherical model of convection in the earth's mantle

    NASA Technical Reports Server (NTRS)

    Glatzmaier, Gary A.; Schubert, Gerald; Bercovici, Dave

    1990-01-01

    Model calculations are described for a compressible fluid in a three-dimensional spherical shell with 80 percent of the surface heat flow generated within the model mantle. The numerical solutions are strongly chaotic, with surface planforms dominated by long curvilinear downflows reminiscent of the descending slabs in the earth's mantle. The results suggest that descending slabs play an important part in driving mantle convection, and that their chaotic evolution may influence the spatial and temporal behavior of plates and thus the dispersal and aggregation of continents.

  10. A One-dimensional Transient Model of Down-flow Through a Swelling Packed Porous Bed

    SciTech Connect

    SHADDAY, MARTIN

    2004-08-13

    A transient model of down-flow through an ion exchange column in which the resin swells has been developed. The model is herein described and results are presented. Wall friction can lead to high bed stresses when the resin in columns with high length to diameter ratios swells. These stresses can lead to high and potentially excursive hydraulic pressure drops along a column. A non-dimensional grouping that effectively correlates the final steady-state hydraulic behavior of a column with the resin compressibility, column geometric, and flow parameters has been determined.

  11. DETECTION OF SUPERSONIC DOWNFLOWS AND ASSOCIATED HEATING EVENTS IN THE TRANSITION REGION ABOVE SUNSPOTS

    SciTech Connect

    Kleint, L.; Martínez-Sykora, J.; Antolin, P.; Tian, H.; Testa, P.; Reeves, K. K.; McKillop, S.; Saar, S.; Golub, L.; Judge, P.; Carlsson, M.; Hansteen, V.; Jaeggli, S.; and others

    2014-07-10

    Interface Region Imaging Spectrograph data allow us to study the solar transition region (TR) with an unprecedented spatial resolution of 0.''33. On 2013 August 30, we observed bursts of high Doppler shifts suggesting strong supersonic downflows of up to 200 km s{sup –1} and weaker, slightly slower upflows in the spectral lines Mg II h and k, C II 1336, Si IV 1394 Å, and 1403 Å, that are correlated with brightenings in the slitjaw images (SJIs). The bursty behavior lasts throughout the 2 hr observation, with average burst durations of about 20 s. The locations of these short-lived events appear to be the umbral and penumbral footpoints of EUV loops. Fast apparent downflows are observed along these loops in the SJIs and in the Atmospheric Imaging Assembly, suggesting that the loops are thermally unstable. We interpret the observations as cool material falling from coronal heights, and especially coronal rain produced along the thermally unstable loops, which leads to an increase of intensity at the loop footpoints, probably indicating an increase of density and temperature in the TR. The rain speeds are on the higher end of previously reported speeds for this phenomenon, and possibly higher than the free-fall velocity along the loops. On other observing days, similar bright dots are sometimes aligned into ribbons, resembling small flare ribbons. These observations provide a first insight into small-scale heating events in sunspots in the TR.

  12. Observation and analysis of ballistic downflows in a M-class flare using IRIS

    NASA Astrophysics Data System (ADS)

    Brannon, Sean

    2016-05-01

    Despite significant advances in instrumentation, there remain no studies that analyze observations of on-disk flare loop plasma flows covering the entire evolution from chromospheric evaporation, through plasma cooling, to draining downflows. We present results from an imaging and spectroscopic observation from the Interface Region Imaging Spectrograph (IRIS) of the SOL2015-03-12T11:50:00 M-class flare, at high spatial resolution and time cadence. Our analysis of this event reveals initial plasma evaporation at flare temperatures indicated by 100-200 km/s blueshifts in the Fe XXI line. We subsequently observe plasma cooling into chromospheric lines (Si IV and O IV) with ~11 minute delay, followed by loop draining at ~40 km/s as indicated by a ``C''-shaped redshift structure and significant (~60 km/s) non-thermal broadening. We use density sensitive lines to calculate a plasma density for the flare loops, and estimate a theoretical cooling time approximately equal to the observed delay. Finally, we use a simple elliptical free-fall draining model to construct synthetic spectra, and perform what we believe to be the first direct comparison of such synthetic spectra to observations of draining downflows in flare loops.

  13. Supra Arcade Downflows with XRT Informed by Dipolarization Fronts with THEMIS

    NASA Technical Reports Server (NTRS)

    Kobelski, Adam; Savage, Sabrina Leah; Malaspina, David

    2016-01-01

    Magnetic reconnection can rapidly reconfigure the magnetic field of the corona, accelerating plasma through the site of reconnection. Ambiguities due to the nature of remote sensing have complicated the interpretation of observations of the inflowing and outflowing plasma in reconnecting regions. In particular, the interpretation of sunward moving density depletions above flare arcades (known as Supra Arcade Downflows - SADs) is still debated. Hinode/XRT has provided a wealth of observations for SADs and helped inform our current understanding of these structures. SADs have been interpreted as wakes behind newly reconnected and outflowing loops (Supra Arcade Downflowing Loops - SADLs). Models have shown the plausibility of this interpretation, though this interpretation has not yet been fully accepted. We present here observations of newly reconnected outflowing loops observed via in situ instruments in the magnetosphere. These observations, provided by five THEMIS spacecraft, show that around retracting loops (dipolarization fronts in this context) similar dynamic temperature and density structures are found as seen in SADs. We compare data from multiple SADs and dipolarization fronts to show that the observational signatures implied in the corona can be directly observed in similar plasma regimes in the magnetosphere, strongly favoring the interpretation of SADs as wakes behind retracting loops.

  14. A downflow hanging sponge (DHS) reactor for faecal coliform removal from an upflow anaerobic sludge blanket (UASB) effluent.

    PubMed

    Yaya Beas, Rosa Elena; Kujawa-Roeleveld, Katarzyna; van Lier, Jules B; Zeeman, Grietje

    2015-01-01

    This research was conducted to study the faecal coliforms removal capacity of downflow hanging sponge (DHS) reactors as a post-treatment for an upflow anaerobic sludge blanket (UASB) reactor. Three long-term continuous laboratory-scale DHS reactors, i.e. a reactor with cube type sponges without recirculation, a similar one with recirculation and a reactor with curtain type sponges, were studied. The porosities of the applied medium were 91%, 87% and 47% respectively. The organic loading rates were 0.86 kgCOD m(-3) d(-1), 0.53 kgCOD m(-3) d(-1) and 0.24 kgCOD m(-3) d(-1) correspondingly at hydraulic loading rates of 1.92 m3 m(-2) d(-1), 2.97 m3 m(-2) d(-1) and 1.32 m3 m(-2) d(-1), respectively (COD: chemical oxygen demand). The corresponding averages for faecal coliform removal were 99.997%, 99.919% and 92.121% respectively. The 1989 WHO guidelines standards, in terms of faecal coliform content for unrestricted irrigation (category A), was achieved with the effluent of the cube type DHS (G1) without recirculation. Restricted irrigation, category B and C, is assigned to the effluent of the cube type with recirculation and the curtain type, respectively. Particularly for organic compounds, the effluent of evaluated DHS reactors complies with USEPA standards for irrigation of so called non-food crops like pasture for milking animals, fodder, fibre, and seed crops. PMID:26606098

  15. 3D MHD SIMULATION OF FLARE SUPRA-ARCADE DOWNFLOWS IN A TURBULENT CURRENT SHEET MEDIUM

    SciTech Connect

    Cécere, M.; Zurbriggen, E.; Costa, A.; Schneiter, M.

    2015-07-01

    Supra-arcade downflows (SADs) are sunward, generally dark, plasma density depletions originated above posteruption flare arcades. In this paper, using 3D MHD simulations we investigate whether the SAD cavities can be produced by a direct combination of the tearing mode and Kelvin–Helmholtz instabilities leading to a turbulent current sheet (CS) medium or if the current sheet is merely the background where SADs are produced, triggered by an impulsive deposition of energy. We find that to give an account of the observational dark lane structures an addition of local energy, provided by a reconnection event, is required. We suggest that there may be a closed relation between characteristic SAD sizes and CS widths that must be satisfied to obtain an observable SAD.

  16. Swarm observations of kilometer-scale low-altitude cusp/cleft ion upflow and downflow

    NASA Astrophysics Data System (ADS)

    Burchill, J. K.; Knudsen, D. J.; Buchert, S. C.

    2015-12-01

    The European Space Agency's Swarm mission is used to study the physics of the F region cusp/cleft ion fountain. In brief, the cleft ion fountain is a region where large fluxes of terrestrial plasma, including relatively heavy ions such as oxygen, are observed to escape into space. Such atmospheric loss is driven by and can influence magnetospheric processes. The three Swarm satellites are well-suited for investigating the properties of the low-altitude ionospheric reservoir thought to be significant in supplying plasma for high-altitude outflows. Each satellite is instrumented to measure ion velocity, plasma density and temperature, and electric and magnetic fields at cadences of 2 samples/s and higher. We probe the structuring of ion upflow and downflow at kilometer scales by investigating the relationship between upflow and ion heating, electron heating, and field-aligned electric currents.

  17. TREATMENT OF METHANOLIC WASTEWATER BY ANAEROBIC DOWN-FLOW HANGING SPONGE (ANDHS) REACTOR AND UASB REACTOR

    NASA Astrophysics Data System (ADS)

    Sumino, Haruhiko; Wada, Keiji; Syutsubo, Kazuaki; Yamaguchi, Takashi; Harada, Hideki; Ohashi, Akiyoshi

    Anaerobic down-flow hanging sponge (AnDHS) reactor and UASB reactor were operated at 30℃ for over 400 days in order to investigate the process performance and the sludge characteristics of treating methanolic wastewater (2 gCOD/L). The settings OLR of AnDHS reactor and of UASB reactor were 5.0 -10.0 kgCOD/m3/d and 5.0 kgCOD/m3/d. The average of the COD removal demonstrated by both reactors were over 90% throughout the experiment. From the results of methane producing activities and the PCR-DGGE method, most methanol was directly converted to methane in both reactors. The conversion was carried out by different methanogens: one closely related to Methanomethylovorans hollandica in the AnDHS retainted sludge and the other closely related to Methanosarcinaceae and Metanosarciales in the UASB retainted sludge.

  18. Heat transfer and pressure drop in an annular channel with downflow

    NASA Astrophysics Data System (ADS)

    Dolan, F. X.; Crowley, C. J.; Qureshi, Z. H.

    The onset of a flow instability (OFI) determines the minimum flow rate for cooling in the flow channels of a nuclear fuel assembly. A test facility was constructed with full-scale models (length and diameter) of annular flow channels incorporating many instruments to measure heat transfer and pressure drop with downflow in the annulus. Tests were performed both with and without axial centering ribs at prototypical values of pressure, flow rate and uniform wall heat flux. The axial ribs have the effect of subdividing the annulus into quadrants, so the problem becomes one of parallel channel flow, unlike previous experiments in tubes (upflow and downflow). Other tests were performed to determine the effects if any of asymmetric and non-uniform circumferential wall heating, operating pressure level and dissolved gas concentration. Data from the tests are compared with models for channel heat transfer and pressure drop profiles in several regimes of wall heating from single-phase forced convection through partially and fully developed nucleate boiling. Minimum stable flow rates were experimentally determined as a function of wall heat flux and heat distribution and compared with the model for the transition to fully developed boiling which is a key criterion in determining the OFI condition in the channel. The heat transfer results in the channel without ribs are in excellent agreement with predictions from a computer model of the flow in the annulus and with empirical correlations developed from similar tests. The test results with centering ribs show that geometrical variations between the channels can lead to differences in subchannel behavior which can make the effect of the ribs and the geometry an important factor when assessing the power level at which the fuel assembly (and the reactor) can be operated to prevent overheating in the event of a loss-of-coolant-accident (LOCA).

  19. Flow regime mapping of vertical two-phase downflow in a ribbed annulus

    SciTech Connect

    Kielpinski, A.L.

    1992-12-01

    Two-phase flow regimes have been mapped for vertical, cocurrent downflow in a narrow annulus which is partially segmented by the presence of longitudinal ribs. This geometry and flow condition has application to the analysis of a Large-Break Loss of Coolant Accident (LB-LOCA) in the production K-Reactor at the Savannah River Site (SRS). The ribbed annular geometry, particularly the presence of non-sealing ribs, gives rise to some unique phenomenological features. The flow behavior is influenced by the partial segmentation of the annulus into four quadrants or subchannels. A random element is induced by the natural bowing of the slender tubes; the width of the azimuthal flow path between two subchannels at a given axial location is indeterminate, and can take on any value between zero and the maximum clearance of 7.6 {times} l0{sup {minus}4} m. When the rib gap is zero at a given location, it is at a maximum 180P away at the same axial location. The range of rib gaps is spanned in a single test section, as it would be also in a reactor assembly. As a result of these effects, flow regime maps obtained by other researchers for downflow in annuli are not accurate for defining flow regimes in a ribbed annulus. Flow regime transitions similar to those noted by, e.g., Bamea, were observed; the locations of these transitions were displaced with respect to the transition equations derived by Bamea. Experimental bubble rise velocity measurements were also obtained in the same test section. The bubble rise velocities were much higher than expected from the theory developed for slug bubbles in tubes, unribbed annuli, and rectangular channels. An elliptical-cap bubble rises faster than a slug bubble of the same area. Large, slug-shaped bubbles injected into the test section were observed to reduce in size as they rose, due to interaction with a longitudinal rib. They thereby adopted a shape more like an elliptical-cap bubble, hence rising faster than the original slug bubble.

  20. Flow regime mapping of vertical two-phase downflow in a ribbed annulus

    SciTech Connect

    Kielpinski, A.L.

    1992-01-01

    Two-phase flow regimes have been mapped for vertical, cocurrent downflow in a narrow annulus which is partially segmented by the presence of longitudinal ribs. This geometry and flow condition has application to the analysis of a Large-Break Loss of Coolant Accident (LB-LOCA) in the production K-Reactor at the Savannah River Site (SRS). The ribbed annular geometry, particularly the presence of non-sealing ribs, gives rise to some unique phenomenological features. The flow behavior is influenced by the partial segmentation of the annulus into four quadrants or subchannels. A random element is induced by the natural bowing of the slender tubes; the width of the azimuthal flow path between two subchannels at a given axial location is indeterminate, and can take on any value between zero and the maximum clearance of 7.6 [times] l0[sup [minus]4] m. When the rib gap is zero at a given location, it is at a maximum 180P away at the same axial location. The range of rib gaps is spanned in a single test section, as it would be also in a reactor assembly. As a result of these effects, flow regime maps obtained by other researchers for downflow in annuli are not accurate for defining flow regimes in a ribbed annulus. Flow regime transitions similar to those noted by, e.g., Bamea, were observed; the locations of these transitions were displaced with respect to the transition equations derived by Bamea. Experimental bubble rise velocity measurements were also obtained in the same test section. The bubble rise velocities were much higher than expected from the theory developed for slug bubbles in tubes, unribbed annuli, and rectangular channels. An elliptical-cap bubble rises faster than a slug bubble of the same area. Large, slug-shaped bubbles injected into the test section were observed to reduce in size as they rose, due to interaction with a longitudinal rib. They thereby adopted a shape more like an elliptical-cap bubble, hence rising faster than the original slug bubble.

  1. Influence of pre-existing topography on downflow lava discharge rates estimated from thermal infrared airborne data

    NASA Astrophysics Data System (ADS)

    Lombardo, V.

    2016-04-01

    Remote sensing thermal data of active lava flows allow the evaluation of effusion rates. This is made possible by a simple formula relating the lava effusion rate to the heat flux radiated per unit time from the surface of the flow. Due to the assumptions of the model, this formula implies that heat flux, surface temperature and lava temperature vary as a function of the flow thickness. These relationships, never verified or validated before, have been used by several authors as a proof of the weakness of the model. Here, multispectral infrared and visible imaging spectrometer (MIVIS) high spatial resolution (5-10 m) thermal data acquired during Etna's 2001 eruption were used to investigate downflow heat flux variations in the lava flow emitted from a vent located at 2100 m a.s.l. A high correlation between the downflow heat flux and the lava flow thickness (measured from a pre-existing digital elevation model) was found. Topography beneath the flow appears to play an important role both in lava emplacement mechanisms and flow dynamics. MIVIS-derived downflow effusion rates are consistent with the law of conservation of mass assessing the reliability of remote sensing techniques.

  2. Dynamical Thermal Structure of Super-arcade Downflows in Solar Flares

    NASA Astrophysics Data System (ADS)

    Chen, Xin; Liu, Rui; Deng, Na; Wang, Haimin

    2015-04-01

    Super­-arcade downflows (SADs) have been frequently observed during the gradual phase of flares near the limb. In coronal emission lines sensitive to flaring plasmas, they appear as tadpole-like dark voids against the bright fan-shape “haze” above the well-defined flare arcade and flow toward the arcade. We carefully studied several selected SADs from two flare events using data observed by Solar Dynamic Observatory / Atmospheric Imaging Assembly and calculated their differential emission measures (DEMs) as well as the DEM-weighted temperature. Our analysis shows that SADs are associated with a substantially decreased DEMs, by 1~3 order of magnitude, compared with the surrounding plasma. None of the SADs indicate DEM solutions above 20 MK, which implies that SADs are indeed density depletion rather than very hot plasma. This depression in DEMs rapidly recovers as SADs pass through, generally in a few minutes. In addition, we found that SADs in one event appear spatio-temporally associated with the formation of postflare loops. These results are examined against models and numerical simulations.

  3. Hydrodynamic studies of post dryout two-phase downflow in narrow channels

    SciTech Connect

    Eberle, C.S.; Ishii, M.; Revankar, S.T.

    1995-07-01

    An experimental study of the hydrodynamics of a narrow channel was performed in order to obtain the heat transfer mechanisms and influences contributing to the flow regime transition from inverted annular to inverted slug flows for post dryout downflow. The experimental series consisted of both adiabatic and diabatic visualization tests over a wide range of fluid and thermal parameters. The system inlet gas velocities ranged from 0 to 14 meters per second while the inlet fluid velocities ranged from 1 to 3 meters per second. Full extent visualization of the flow regime was possible due to a quartz tube in tube construction with a clear heating fluid. Constant temperature heating of the freon was accomplished at bulk fluid temperatures above the critical heat flux temperature. For each hydrodynamic flow condition, one to three minuets of VHS-video filming was performed to acquire both flow regime and break-up length data. In addition to this the flow field parameters were recorded simultaneously with the filming.

  4. Recovery of partial nitrification in a down-flow hanging sponge reactor by salt shock loading.

    PubMed

    Matsubayashi, Miri; Harada, Hideki; Okubo, Tsutomu; Uemura, Shigeki

    2016-01-01

    Partial nitrification of ammonium-containing artificial wastewater was achieved using a down-flow hanging sponge (DHS) reactor with a hydraulic retention time (HRT) of 2 h by adjusting the influent salinity to 25 g Cl L(-1) with NaCl. The effect of HRT on partial nitrification was examined by varying HRT from 1 to 4 h. Extending HRT from 2 to 4 h had the effect of decreasing nitrite production and increasing nitrates. Since partial nitrification was not completely recovered after returning the HRT to 2 h, we examined the effect of salt shock loading on the recovery of partial nitrification. Salt shock loading with 150 gCl L(-1) for 72 h resulted in the fraction of NO2-N to total inorganic nitrogen in the effluent reaching 83.0% as much as 83 days after returning the salinity to the original level. Thus, despite the time required for the restoration of partial nitrification, the effectiveness of salt shock loading to achieve this aim was verified. PMID:26653861

  5. Stratified ecology techniques in the startup of an anaerobic downflow fixed film percolating reactor

    SciTech Connect

    Canovas-Diaz, M.; Howell, J.A.

    1987-01-01

    A two-column pilot scale downflow percolating fixed film (DPFF) anaerobic reactor treating deproteinized cheese whey (DPW) was used in this study. The system was operated at one-third of the maximum working volume in an attempt to avoid mass transfer limitations of the gas products (since two-thirds of the immobilized microbial culture was unsubmerged), as well as to minimize the effects of localized high volatile fatty acids (VFA) levels and low pH on its methanogenic activity. A new method to shorten the start-up period was used by growing methanogenic and acetogenic (H2-producers) bacteria on a synthetic medium until reaching a stable methane production rate and then switching the reactor over to DPW and allowing acidogenic growth. The start-up period was reduced to 35 days as a result of this operational mode. The reactor was able to handle 8 kg COD/cubic m density after 35 days of operation. (Refs. 24).

  6. Thermal structure of current sheets and supra-arcade downflows in the solar corona

    SciTech Connect

    Hanneman, Will J.; Reeves, Katharine K. E-mail: kreeves@cfa.harvard.edu

    2014-05-10

    After the peak intensity of many large solar flares, magnetic and thermodynamic processes give rise to a phenomenon known as supra-arcade downflows (SADs). SADs are sunward flowing density depletions, often observed in post-flare plasma sheets. Some models have suggested that the plasma in the dark lanes is heated to temperatures of 20-80 MK, which is much hotter than temperatures of the surrounding plasma. In this work, we use data from the Atmospheric Imaging Assembly on the Solar Dynamics Observatory and the X-Ray Telescope on the Hinode satellite to determine the thermal structure of SADs in the solar corona. We examine four flares that took place on 2011 October 22, 2012 January 14, 2012 January 16, and 2012 January 27. Differential emission measures are calculated for each flare and we compare the temperatures in the SADs to those of the surrounding plasma. We find that the SADs are hotter than the background, but cooler than the surrounding plasma in most cases, with only 1 out of the 11 SADs examined here having a slightly higher temperature than its surroundings.

  7. Performance of down-flow hanging sponge (DHS) reactor coupled with up-flow anaerobic sludge blanket (UASB) reactor for treatment of onion dehydration wastewater.

    PubMed

    El-Kamah, Hala; Mahmoud, Mohamed; Tawfik, Ahmed

    2011-07-01

    In this study, a promising system consisting of up-flow anaerobic sludge blanket (UASB) reactor followed by down-flow hanging sponge (DHS) reactor was investigated for onion dehydration wastewater treatment. Laboratory experiments were conducted at two different phases, i.e., phase (1) at overall hydraulic retention time (HRT) of 11h (UASB reactor: 6h and DHS reactor: 5h) and phase (2) at overall HRT of 9.4h (UASB reactor: 5.2h and DHS reactor: 4.2h). Long-term operation results of the proposed system showed that its overall TCOD, TBOD, TSS, TKN and NH(4)-N removal efficiencies were 92 ± 5, 95 ± 2, 95 ± 2, 72 ± 6 and 99 ± 1.3%, respectively (phase 1). Corresponding values for the 2nd phase were 85.4 ± 5, 86 ± 3, 87 ± 6, 65 ± 8 and 95 ± 2.8%. Based on the available results, the proposed system could be more viable option for treatment of wastewater generated from onion dehydration industry in regions with tropical or sub-tropical climates and with stringent discharge standards.

  8. Mixing characteristics and startup of anaerobic downflow stationary fixed film (DSFF) reactors

    SciTech Connect

    Samson, R.; van den Berg, L.; Kennedy, K.J.

    1985-01-01

    Tests to determine the mixing characteristics of the anaerobic downflow stationary fixed film (DSFF) reactor during startup showed that mixing characteristics affected performance. Different mixing profiles were obtained by keeping the same flow distribution system and by varying the number of clay channels (1, 4, and 25) in the DSFF reactors (2-32 l). Results with a clean bed reactor indicated a plug flow pattern with a relatively large extent of dispersion. Recirculation dramatically improved the mixing and the residence time distribution (RTD) changed to that of the completely mixed type. Multiple-channel reactors exhibited a dead space of ca. 12% of the total volume, likely a result of a less than optimally designed flow distributor. A startup period of 90 days was necessary to achieve a maximum loading rate of between 10 and 15 kg COD/cubic m day, a volumetric methane production rate of up to 3 cubic m (STP)/cubic m day and a COD reduction efficiency of up to 90%. For the first 50 days of operation, the difference in achievable volumetric loading rate and volumetric methane production rate was only related to the surface-to-volume ratio of the reactors and was not affected by the number of channels present. After 90 days, the bacterial growth on the support material was sufficient to dramatically increase the amount of dead space in the reactors, especially in multiple-channel reactors (up to 55% of their volume). As a result, the performance of these reactors deteriorated and overloading characteristics were observed.

  9. RE-INTERPRETATION OF SUPRA-ARCADE DOWNFLOWS IN SOLAR FLARES

    SciTech Connect

    Savage, Sabrina L.; Reeves, Katharine K.

    2012-03-10

    Following the eruption of a filament from a flaring active region, sunward-flowing voids are often seen above developing post-eruption arcades. First discovered using the soft X-ray telescope aboard Yohkoh, these supra-arcade downflows (SADs) are now an expected observation of extreme ultra-violet and soft X-ray coronal imagers and spectrographs (e.g, TRACE, SOHO/SUMER, Hinode/XRT, SDO/AIA). Observations made prior to the operation of AIA suggested that these plasma voids (which are seen in contrast to bright, high-temperature plasma associated with current sheets) are the cross-sections of evacuated flux tubes retracting from reconnection sites high in the corona. The high temperature imaging afforded by AIA's 131, 94, and 193 Angstrom-Sign channels coupled with the fast temporal cadence allows for unprecedented scrutiny of the voids. For a flare occurring on 2011 October 22, we provide evidence suggesting that SADs, instead of being the cross-sections of relatively large, evacuated flux tubes, are actually wakes (i.e., trailing regions of low density) created by the retraction of much thinner tubes. This re-interpretation is a significant shift in the fundamental understanding of SADs, as the features once thought to be identifiable as the shrinking loops themselves now appear to be 'side effects' of the passage of the loops through the supra-arcade plasma. In light of the fact that previous measurements have attributed to the shrinking loops characteristics that may instead belong to their wakes, we discuss the implications of this new interpretation on previous parameter estimations and on reconnection theory.

  10. High-resolution Observation of Downflows at One End of A Pre-eruption Filament

    NASA Astrophysics Data System (ADS)

    Li, Qin

    2016-05-01

    Studying the dynamics of pre-eruption filaments can shed important light on the precursor of eruptive events. Such studies in high-resolution (in the order of 0.1") are highly demanded yet very rare so far. In this work, we present a detailed observation of a pre-eruption filament obtained by the 1.6 m New Solar Telescope (NST) at the Big Bear Solar Observatory (BBSO). One end of the filament anchored at the sunspot in AR11515, which was observed by NST H-alpha offbands 4 hours before till 1 hour after its eruption and an associated C7.4 flare. The other end of the filament anchored at a weak field region about 121,000 kms away from the AR. We observed persistent downflowing materials along threads in the filament at the AR end during the 4 hours before the eruption. We traced the trajectories of plasma blobs along couple of threads and obtained a measured average apparent velocity of 52 km/s. We further estimated the real velocities of the down flows and the altitude of the filament by matching the observed threads with field lines extrapolated from a nonlinear force-free field (NLFFF) model. We also observed chromospheric footpoint brightenings impacted by those falling plasma blobs. Larger FOV observations from BBSO full disc H-alpha images show that the AR end of the filament started ascending four hours before the flare eruption while the other end kept steady. We attribute the down flows observed at the end of the filament to the draining effect of the rising prior to its eruption, which could be an important precursor of eruptive events.

  11. High temperature air-blown woody biomass gasification model for the estimation of an entrained down-flow gasifier.

    PubMed

    Kobayashi, Nobusuke; Tanaka, Miku; Piao, Guilin; Kobayashi, Jun; Hatano, Shigenobu; Itaya, Yoshinori; Mori, Shigekatsu

    2009-01-01

    A high temperature air-blown gasification model for woody biomass is developed based on an air-blown gasification experiment. A high temperature air-blown gasification experiment on woody biomass in an entrained down-flow gasifier is carried out, and then the simple gasification model is developed based on the experimental results. In the experiment, air-blown gasification is conducted to demonstrate the behavior of this process. Pulverized wood is used as the gasification fuel, which is injected directly into the entrained down-flow gasifier by the pulverized wood banner. The pulverized wood is sieved through 60 mesh and supplied at rates of 19 and 27kg/h. The oxygen-carbon molar ratio (O/C) is employed as the operational condition instead of the air ratio. The maximum temperature achievable is over 1400K when the O/C is from 1.26 to 1.84. The results show that the gas composition is followed by the CO-shift reaction equilibrium. Therefore, the air-blown gasification model is developed based on the CO-shift reaction equilibrium. The simple gasification model agrees well with the experimental results. From calculations in large-scale units, the cold gas is able to achieve 80% efficiency in the air-blown gasification, when the woody biomass feedrate is over 1000kg/h and input air temperature is 700K.

  12. Quantification of organic and nitrogen removal in downflow hanging sponge (DHS) systems as a post-treatment of UASB effluent.

    PubMed

    Wichitsathian, B; Racho, P

    2010-01-01

    The aim of this research was to investigate the nature and composition of organic substrate in two down-flow hanging sponge (DHS) systems using mixed fungal (FDHS) and bacterial (BDHS) cultures treatment for UASB effluent of tapioca starch wastewater, evaluated by COD fractionations and two material balances. The random type DHS reactors were operated as modular columns consisting of four identical segments connected vertically. Results of the wastewater characterization showed that carbonaceous fractions were varied on a function of DHS height. Two balances applied to experimental data were for chemical oxygen demand (COD) and nitrogen (N). Results of mass balance calculations can also be used to examine the process behavior of two DHS systems to improve the organic and nitrogen removal mechanisms.

  13. Investigation of hydrodynamics and heat transfer at liquid metal downflow in a rectangular duct in a coplanar magnetic field

    NASA Astrophysics Data System (ADS)

    Poddubnyi, I. I.; Razuvanov, N. G.

    2016-02-01

    Hydrodynamics and heat transfer in a liquid metal downflow in a rectangular duct with an aspect ratio of approximately 3/1 in a coplanar magnetic field (MF) are studied upon inhomogeneous (one-sided) heating of the duct. The flow in the heat-transfer duct of the cooling system of a liquid-metal blanket module of the tokamak-type thermonuclear reactor is modeled. Experiments were carried out at the mercury magnetohydrodynamic (MHD) test facility, which is a part of the MHD-complex of Moscow Power Engineering Institute-Joint Institute for High Temperatures of the Russian Academy of Sciences. A probe technique is used for measurements in the flow. The studies are performed within the following ranges of regime parameters: Reynolds numbers Re = 10000-55000, Hartmann numbers Ha = 0-800, and Grashof numbers Grq = 0-6 × 108. Averaged profiles of velocity, temperature, temperature fluctuations of the flow, and duct wall temperature are presented for two typical flow regimes. Detailed measurements are performed in the duct cross-section distant from the heating beginning in the region of homogeneous MF. MF leads to the turbulent transport suppression, owing to which the temperature on the heated wall increases. A considerable influence of the heat-gravitational counter-convection, the interaction of which with the external MF leads in some regimes to the appearance and development of instabilities in the laminarized flow, is revealed under the downflow conditions. Generation of large-scale secondary vortices with the axis parallel to the MF induction causes temperature fluctuations of the abnormal intensity that considerably exceeds the level of turbulent fluctuations. Such temperature fluctuations easily penetrate into the duct wall and can lead to the fatigue breakdown of thermonuclear reactor cooling paths. Ranges of unallowable regime parameters are determined and the boundary in coordinates Gr-Re is presented, where this effect is revealed or vanishes. The numerical

  14. Optimization of operating parameters of hybrid vertical down-flow constructed wetland systems for domestic sewerage treatment.

    PubMed

    Huang, Zhujian; Zhang, Xianning; Cui, Lihua; Yu, Guangwei

    2016-09-15

    In this work, three hybrid vertical down-flow constructed wetland (HVDF-CW) systems with different compound substrates were fed with domestic sewage and their pollutants removal performance under different hydraulic loading and step-feeding ratio was investigated. The results showed that the hydraulic loading and step-feeding ratio were two crucial factors determining the removal efficiency of most pollutants, while substrate types only significantly affected the removal of COD and NH4(+)-N. Generally, the lower the hydraulic loading, the better removal efficiency of all contaminants, except for TN. By contrast, the increase of step-feeding ratio would slightly reduce the removal rate of ammonium and TP but obviously promoted the TN removal. Therefore, the optimal operation of this CWs could be achieved with low hydraulic loading combined with 50% of step-feeding ratio when TN removal is the priority, whereas medium or low hydraulic loading without step-feeding would be suitable when TN removal is not taken into consideration. The obtained results in this study can provide us with a guideline for design and optimization of hybrid vertical flow constructed wetland systems to improve the pollutants removal from domestic sewage.

  15. Anaerobic digestion of corn ethanol thin stillage in batch and by high-rate down-flow fixed film reactors.

    PubMed

    Wilkinson, A; Kennedy, K J

    2012-01-01

    Thin stillage (CTS) from a dry-grind corn ethanol plant was evaluated as a carbon source for anaerobic digestion (AD) by batch and high rate semi-continuous down-flow stationary fixed film (DSFF) reactors. Biochemical methane potential (BMP) assays were carried out with CTS concentrations ranging from approximately 2,460-27,172 mg total chemical oxygen demand (TCOD) per litre, achieved by diluting CTS with clean water or a combination of clean water and treated effluent. High TCOD, SCOD and volatile solids (VS) removal efficiencies of 85 ± 2, 94 ± 0 and 82 ± 1% were achieved for CTS diluted with only clean water at an organic concentration of 21,177 mg TCOD per litre, with a methane yield of 0.30 L methane per gram TCOD(removed) at standard temperature and pressure (STP, 0 °C and 1 atmosphere). Batch studies investigating the use of treated effluent for dilution showed promising results. Continuous studies employed two mesophilic DSFF anaerobic digesters treating thin stillage, operated at hydraulic retention times (HRT) of 20, 14.3, 8.7, 6.3, 5 and 4.2 d. Successful digestion was achieved up to an organic loading rate (OLR) of approximately 7.4 g TCOD L(-1)d(-1) at a 5 d HRT with a yield of 2.05 LCH(4) L(-1)d(-1) (at STP) and TCOD and VS removal efficiencies of 89 ± 3 and 85 ± 3%, respectively.

  16. Bacterial community involved in the nitrogen cycle in a down-flow sponge-based trickling filter treating UASB effluent.

    PubMed

    Mac Conell, E F A; Almeida, P G S; Martins, K E L; Araújo, J C; Chernicharo, C A L

    2015-01-01

    The bacterial community composition of a down-flow sponge-based trickling filter treating upflow anaerobic sludge blanket (UASB) effluent was investigated by pyrosequencing. Bacterial community composition considerably changed along the reactor and over the operational period. The dominant phyla detected were Proteobacteria, Verrucomicrobia, and Planctomycetes. The abundance of denitrifiers decreased from the top to the bottom and it was consistent with the organic matter concentration gradients. At lower loadings (organic and nitrogen loading rates), the abundance of anammox bacteria was higher than that of the ammonium-oxidizing bacteria in the upper portion of the reactor, suggesting that aerobic and anaerobic ammonium oxidation occurred. Nitrification occurred in all the compartments, while anammox bacteria prominently appeared even in the presence of high organic carbon to ammonia ratios (around 1.0-2.0 gCOD gN(-1)). The results suggest that denitrifiers, nitrifiers, and anammox bacteria coexisted in the reactor; thus, different metabolic pathways were involved in ammonium removal in the post-UASB reactor sponge-based.

  17. Removal of diclofenac and sulfamethoxazole from synthetic municipal waste water in microcosm downflow constructed wetlands: Start-up results.

    PubMed

    Nowrotek, Monika; Sochacki, Adam; Felis, Ewa; Miksch, Korneliusz

    2016-01-01

    The objectives of this study were to investigate the start-up removal of pharmaceutical compounds diclofenac and sulfamethoxazole in microcosm downflow constructed wetlands and their effect on the performance of the studied constructed wetlands, and also to assess the effect of plants on the removal of these compounds. The experimental system that was used in this 86-day experiment consisted of 24 columns filled up to 70 cm with predominantly sandy material. Four types of columns were used (six replicates) depending on the presence of plants (Phalaris arundinacea L. var. picta L.) and the presence of pharmaceutical compounds in the influent. The influent was synthetic municipal waste water to which a mixture of 5 mg/L of diclofenac and 5 mg/L of sulfamethoxazole was added. The observed removal of diclofenac was moderate (approx. 50%) and the removal of sulfamethoxazole was relatively low (24-30%). It was found that the removal of diclofenac and sulfamethoxazole was not affected by the vegetation. The presence of diclofenac and sulfamethoxazole in the influent had significant effect on the effluent concentration of N-NO3 and the water loss in the columns, which in both cases were lower than in the control columns. The scope for further research was discussed. PMID:26247111

  18. Removal of diclofenac and sulfamethoxazole from synthetic municipal waste water in microcosm downflow constructed wetlands: Start-up results.

    PubMed

    Nowrotek, Monika; Sochacki, Adam; Felis, Ewa; Miksch, Korneliusz

    2016-01-01

    The objectives of this study were to investigate the start-up removal of pharmaceutical compounds diclofenac and sulfamethoxazole in microcosm downflow constructed wetlands and their effect on the performance of the studied constructed wetlands, and also to assess the effect of plants on the removal of these compounds. The experimental system that was used in this 86-day experiment consisted of 24 columns filled up to 70 cm with predominantly sandy material. Four types of columns were used (six replicates) depending on the presence of plants (Phalaris arundinacea L. var. picta L.) and the presence of pharmaceutical compounds in the influent. The influent was synthetic municipal waste water to which a mixture of 5 mg/L of diclofenac and 5 mg/L of sulfamethoxazole was added. The observed removal of diclofenac was moderate (approx. 50%) and the removal of sulfamethoxazole was relatively low (24-30%). It was found that the removal of diclofenac and sulfamethoxazole was not affected by the vegetation. The presence of diclofenac and sulfamethoxazole in the influent had significant effect on the effluent concentration of N-NO3 and the water loss in the columns, which in both cases were lower than in the control columns. The scope for further research was discussed.

  19. Bacterial community involved in the nitrogen cycle in a down-flow sponge-based trickling filter treating UASB effluent.

    PubMed

    Mac Conell, E F A; Almeida, P G S; Martins, K E L; Araújo, J C; Chernicharo, C A L

    2015-01-01

    The bacterial community composition of a down-flow sponge-based trickling filter treating upflow anaerobic sludge blanket (UASB) effluent was investigated by pyrosequencing. Bacterial community composition considerably changed along the reactor and over the operational period. The dominant phyla detected were Proteobacteria, Verrucomicrobia, and Planctomycetes. The abundance of denitrifiers decreased from the top to the bottom and it was consistent with the organic matter concentration gradients. At lower loadings (organic and nitrogen loading rates), the abundance of anammox bacteria was higher than that of the ammonium-oxidizing bacteria in the upper portion of the reactor, suggesting that aerobic and anaerobic ammonium oxidation occurred. Nitrification occurred in all the compartments, while anammox bacteria prominently appeared even in the presence of high organic carbon to ammonia ratios (around 1.0-2.0 gCOD gN(-1)). The results suggest that denitrifiers, nitrifiers, and anammox bacteria coexisted in the reactor; thus, different metabolic pathways were involved in ammonium removal in the post-UASB reactor sponge-based. PMID:26114279

  20. Optimization of operating parameters of hybrid vertical down-flow constructed wetland systems for domestic sewerage treatment.

    PubMed

    Huang, Zhujian; Zhang, Xianning; Cui, Lihua; Yu, Guangwei

    2016-09-15

    In this work, three hybrid vertical down-flow constructed wetland (HVDF-CW) systems with different compound substrates were fed with domestic sewage and their pollutants removal performance under different hydraulic loading and step-feeding ratio was investigated. The results showed that the hydraulic loading and step-feeding ratio were two crucial factors determining the removal efficiency of most pollutants, while substrate types only significantly affected the removal of COD and NH4(+)-N. Generally, the lower the hydraulic loading, the better removal efficiency of all contaminants, except for TN. By contrast, the increase of step-feeding ratio would slightly reduce the removal rate of ammonium and TP but obviously promoted the TN removal. Therefore, the optimal operation of this CWs could be achieved with low hydraulic loading combined with 50% of step-feeding ratio when TN removal is the priority, whereas medium or low hydraulic loading without step-feeding would be suitable when TN removal is not taken into consideration. The obtained results in this study can provide us with a guideline for design and optimization of hybrid vertical flow constructed wetland systems to improve the pollutants removal from domestic sewage. PMID:27262033

  1. Improvement of hydrogen production via ethanol-type fermentation in an anaerobic down-flow structured bed reactor.

    PubMed

    Anzola-Rojas, Mélida del Pilar; Zaiat, Marcelo; De Wever, Heleen

    2016-02-01

    Although a novel anaerobic down-flow structured bed reactor has shown feasibility and stable performance for a long-term compared to other anaerobic fixed bed systems for continuous hydrogen production, the volumetric rates and yields have so far been too low. In order to improve the performance, an operation strategy was applied by organic loading rate (OLR) variation (12-96 g COD L(-1) d(-1)). Different volumetric hydrogen rates, and yields at the same OLR indicated that the system was mainly driven by the specific organic load (SOL). When SOL was kept between 3.8 and 6.2 g sucrose g(-1) VSS d(-1), the volumetric rates raised from 0.1 to 8.9 L H2 L(-1) d(-1), and the yields were stable around 2.0 mol H2 mol(-1) converted sucrose. Furthermore, hydrogen was produced mainly via ethanol-type fermentation, reaching a total energy conversion rate of 23.40 kJ h(-1) L(-1) based on both hydrogen and ethanol production.

  2. Sugarcane molasses-based bio-ethanol wastewater treatment by two-phase multi-staged up-flow anaerobic sludge blanket (UASB) combination with up-flow UASB and down-flow hanging sponge.

    PubMed

    Choeisai, P; Jitkam, N; Silapanoraset, K; Yubolsai, C; Yoochatchaval, W; Yamaguchi, T; Onodera, T; Syutsubo, K

    2014-01-01

    This study was designed to evaluate a treatment system for high strength wastewater (vinasse) from a sugarcane molasses-based bio-ethanol plant in Thailand. A laboratory-scale two-phase treatment system composed of a sulfate reducing (SR) tank and multi-staged up-flow anaerobic sludge blanket (MS-UASB) reactor was used as the pre-treatment unit. Conventional UASB and down-flow hanging sponge (DHS) reactors were used as the post-treatment unit. The treatment system was operated for 300 days under ambient temperature conditions (24.6-29.6 °C). The hydraulic retention time (HRT) in each unit was kept at 25 h for the two-phase system and 23 h for the UASB&DHS. The influent concentration was allowed to reach up to 15,000 mg chemical oxygen demand (COD)/L. COD removal efficiency (based on influent COD) of the two-phase MS-UASB and the UASB&DHS was 54.9 and 18.7%, respectively. Due to the effective removal of sulfide in the SR tank, the MS-UASB achieved a high methane conversion ratio of up to 97%. In DHS, nitrification occurred at the outside portion of the sponge media while denitrification occurred at the inside. Consequently, 27% of the total nitrogen (TN) was removed. An amount of 32% of residual nitrogen (28 mgN/L) was in the form of nitrate, a better nitrogen state for fertilizer. PMID:24647181

  3. The dissolved chemical and isotopic signature downflow the confluence of two large rivers: The case of the Parana and Paraguay rivers

    NASA Astrophysics Data System (ADS)

    Campodonico, Verena Agustina; García, María Gabriela; Pasquini, Andrea Inés

    2015-09-01

    The Paraná River basin is one of the largest hydrological systems in South America (∼2.6 × 106 km2). Downflow the confluence of tributaries, most large rivers exhibit transverse and longitudinal inhomogeneities that can be detected for tens or even hundreds of kilometers. Concordantly, a noticeable cross-sectional chemical asymmetry in the dissolved load was distinguished in the Middle Paraná River, after the confluence of its main tributaries (i.e., the Paraguay and Upper Paraná rivers). Water chemistry and isotopic signature in three cross-sections along the Middle Paraná River, as well as from main and minor tributaries, and some deep (∼105 m bs) and shallow boreholes (∼15 m bs) located near both river banks, were analyzed in order to define the extent of mixing and identify possible contributions from groundwater discharges. Downflow the confluence of the Upper Paraná and Paraguay rivers a chemical and isotopic asymmetry was observed, mainly through the values of EC, major ions (Ca2+, Na+, Mg2+, Cl- and SO42-), some trace elements (Fe, U, Th, Ba, Sr, As and REE) and stable isotopes (δ18O and δ2H). Toward its western margin, higher elemental concentrations which resembled that of the Paraguay River were measured, whereas at the eastern border, waters were more diluted and preserved the chemical signature of the Upper Paraná River. This variability remained detectable at least until ∼225 km downflow the confluence, where differences between western and eastern margins were less evident. At ∼580 km downflow the confluence, a slight inversion in the transverse chemical asymmetry was observed. This trend switch can be the result of the input of solutes from minor tributaries that reach the main channel from the East and/or may be due to higher groundwater discharges from the East bank. A mass balance model was applied, as a first approach, to estimate the groundwater inflow using the geochemical tracer 222Rn. The results indicate that groundwater

  4. Fate of parasites and pathogenic bacteria in an anaerobic hybrid reactor followed by downflow hanging sponge system treating domestic wastewater.

    PubMed

    Tawfik, A; El-Zamel, T; Herrawy, A; El-Taweel, G

    2015-08-01

    Treatment of domestic wastewater in a pilot-scale upflow anaerobic hybrid (AH) reactor (0.9 m(3)) in combination with downflow hanging sponge (DHS) system (1.3 m(3)) was investigated. The combined system was operated at a hydraulic retention time (HRT) of 6.0 h for AH and 3.2 h for DHS system. The total process achieved a substantial reduction of COD(total) resulting in an average effluent concentration of only 39 ± 12 mg/l. Moreover, 90 ± 7% of ammonia was eliminated in the DHS system. Nitrate and nitrite data revealed that 49 ± 3.2% of the ammonia removal occurred through nitrification process. The removal efficiency of total coliform (TC), fecal coliform (FC), and fecal streptococci (FS) was relatively low in the AH reactor. The major portion of TC, FC, and FS was removed in the DHS system resulting to an average count of 1.7 × 10(5) ± 1.1 × 10(2)/100 ml for TC, 7.1 × 10(4) ± 1.2 × 10(2)/100 ml for FC, and 7.5 × 10(4) ± 1.3 × 10(2)/100 ml for FS in the final effluent. Likely, the combined system was very efficient for the removal of protozoological species such as sarcodins (Entamoeba cysts), flagellates (Giardia cysts), and ciliates (Balantidium cysts). This was not the case for coccidia (Cryptosporidium oocysts), where 36.4 and 27.3% were detected in the effluent of AH and DHS system, respectively. Only 10% of intestinal nematode and cestode ova were recorded in the effluent of AH reactor and were completely removed in the DHS system.

  5. Construction and demolition waste: Comparison of standard up-flow column and down-flow lysimeter leaching tests.

    PubMed

    Butera, Stefania; Hyks, Jiri; Christensen, Thomas H; Astrup, Thomas F

    2015-09-01

    Five samples of construction and demolition waste (C&DW) were investigated in order to quantify leaching of inorganic elements under percolation conditions according to two different experimental setups: standardised up-flow saturated columns (<4mm particle size) and unsaturated, intermittent down-flow lysimeters (<40mm particle size). While standardised column tests are meant primarily to provide basic information on characteristic leaching properties and mechanisms and not to reproduce field conditions, the lysimeters were intended to mimic the actual leaching conditions when C&DW is used in unbound geotechnical layers. In practice, results from standardised percolation tests are often interpreted as estimations of actual release from solid materials in percolation scenarios. In general, the two tests yielded fairly similar results in terms of cumulative release at liquid-to-solid ratio (L/S) 10l·kgTS; however, significant differences were observed for P, Pb, Ba, Mg and Zn. Further differences emerged in terms of concentration in the early eluates (L/S<5l·kg(-1)TS) for Al, As, Ba, Cd, Cu, DOC, Mg, Mn, Ni, P, Pb, Sb, Se, Si, Zn. Observed differences between tests are likely to be due to differences in pH related to crushing and exposure of fresh particle surfaces, as well as in equilibrium conditions. In the case of C&DW, the standardised column tests, which are more practical, are considered to acceptably describe cumulative releases at L/S 10l·kg(-1)TS in percolation scenarios. However, when the focus is on estimation of initial concentrations for (for example) risk assessment, data from standardised column tests may not be fully applicable, and data from lysimeters may be used for validation purposes. Se, Cr and, to a lesser extent, SO4 and Sb were leaching from C&DW in critical amounts compared with existing limit values. PMID:26031330

  6. Effect of hydraulic retention time on the performance of down-flow hanging sponge system treating grey wastewater.

    PubMed

    Tawfik, Ahmed; Wahab, Rifaat Abdel; Al-Asmer, Azza; Matary, Fatma

    2011-08-01

    Grey wastewater (GW) treatment via down-flow hanging sponge (DHS) system was the subject of the study. The reactor was operated at different hydraulic retention times (HRTs) of 11.7, 5.8 and 2.9 h, corresponding to organic loading rates (OLRs) of 1.9, 3.6 and 6.8 kgCOD/m3 day, respectively. The results obtained revealed that decreasing the HRT from 11.7 to 2.9 h negatively affected on the performance of the DHS system. COD(total), COD(soluble), COD(particulate) and detergent removal efficiency were reduced from 96 ± 2.4 to 90 ± 2.3%, from 83 ± 10 to 69 ± 8%, from 98 ± 2 to 94 ± 3% and from 96 ± 12 to 88 ± 6.9%, respectively. However, the removal efficiency of the distinguished COD fractions and detergent remained unaffected when decreasing the HRT from 11.7 to 5.8 h. The DHS system provided a removal efficiency of 95 ± 1% for COD(total), 79 ± 8% for COD(soluble), 98 ± 2 for COD(particulate) and 94.7% for detergent at an HRT of 5.8 h. Based on these results, it is recommended to operate such a system at an HRT of 5.8 h and OLR not exceeding 3.6 kgCOD/m3 day for producing an effluent quality complying for reuse in unrestricted irrigation purposes. The removal of TKj-N and nitrification efficiency in the DHS system was significantly affected by increasing the OLR from 1.9 to 3.6 kgCOD/m3 day and from 3.6 to 6.8 kgCOD/m3 day. At an OLR of 1.9 kgCOD/m3 day, the DHS system removed 80 ± 12% of TKj-N and 91 ± 22% of ammonia which is significantly higher than that at an OLR of 3.6 (58.5 ± 13%) and 6.8 kgCOD/m3 day (26.8 ± 16%). Similar results were recorded for the removal of total coliform (TC), viz., the efficiencies dropped for TC from 99.8 ± 0.2 to 99.4 ± 0.8% and from 99.4 ± 0.8 to 90.0 ± 7.6%, respectively. DHS profile results showed that the major part of COD was removed in the upper portion of the system while the nitrification process was taken place in the lower part of the DHS system at OLR of 1.9 kgCOD/m3 day and HRT of 11.7 h. PMID:21359535

  7. Effect of hydraulic retention time on the performance of down-flow hanging sponge system treating grey wastewater.

    PubMed

    Tawfik, Ahmed; Wahab, Rifaat Abdel; Al-Asmer, Azza; Matary, Fatma

    2011-08-01

    Grey wastewater (GW) treatment via down-flow hanging sponge (DHS) system was the subject of the study. The reactor was operated at different hydraulic retention times (HRTs) of 11.7, 5.8 and 2.9 h, corresponding to organic loading rates (OLRs) of 1.9, 3.6 and 6.8 kgCOD/m3 day, respectively. The results obtained revealed that decreasing the HRT from 11.7 to 2.9 h negatively affected on the performance of the DHS system. COD(total), COD(soluble), COD(particulate) and detergent removal efficiency were reduced from 96 ± 2.4 to 90 ± 2.3%, from 83 ± 10 to 69 ± 8%, from 98 ± 2 to 94 ± 3% and from 96 ± 12 to 88 ± 6.9%, respectively. However, the removal efficiency of the distinguished COD fractions and detergent remained unaffected when decreasing the HRT from 11.7 to 5.8 h. The DHS system provided a removal efficiency of 95 ± 1% for COD(total), 79 ± 8% for COD(soluble), 98 ± 2 for COD(particulate) and 94.7% for detergent at an HRT of 5.8 h. Based on these results, it is recommended to operate such a system at an HRT of 5.8 h and OLR not exceeding 3.6 kgCOD/m3 day for producing an effluent quality complying for reuse in unrestricted irrigation purposes. The removal of TKj-N and nitrification efficiency in the DHS system was significantly affected by increasing the OLR from 1.9 to 3.6 kgCOD/m3 day and from 3.6 to 6.8 kgCOD/m3 day. At an OLR of 1.9 kgCOD/m3 day, the DHS system removed 80 ± 12% of TKj-N and 91 ± 22% of ammonia which is significantly higher than that at an OLR of 3.6 (58.5 ± 13%) and 6.8 kgCOD/m3 day (26.8 ± 16%). Similar results were recorded for the removal of total coliform (TC), viz., the efficiencies dropped for TC from 99.8 ± 0.2 to 99.4 ± 0.8% and from 99.4 ± 0.8 to 90.0 ± 7.6%, respectively. DHS profile results showed that the major part of COD was removed in the upper portion of the system while the nitrification process was taken place in the lower part of the DHS system at OLR of 1.9 kgCOD/m3 day and HRT of 11.7 h.

  8. Downflow limestone beds for treatment of net-acidic, oxic, iron-laden drainage from a flooded Anthracite Mine, Pennsylvania, USA: 1. Field evaluation

    USGS Publications Warehouse

    Cravotta, C.A.; Ward, S.J.

    2008-01-01

    Passive-treatment systems that route acidic mine drainage (AMD) through crushed limestone and/or organic-rich substrates have been used to remove the acidity and metals from various AMD sources, with a wide range of effects. This study evaluates treatment of net-acidic, oxic, iron-laden AMD with limestone alone, and with organic-rich compost layered with the limestone. In the fall of 2003, a treatment system consisting of two parallel, 500-m2 downflow cells followed by a 400-m2 aerobic settling pond and wetland was installed to neutralize the AMD from the Bell Mine, a large source of AMD and baseflow to the Schuylkill River in the Southern Anthracite Coalfield, in east-central Pennsylvania. Each downflow cell consisted of a lower substrate layer of 1,090 metric tons (t) of dolomitic limestone (60 wt% CaCO3) and an upper layer of 300 t of calcitic limestone (95 wt% CaCO3); one of the downflow cells also included a 0.3 m thick layer of mushroom compost over the limestone. AMD with pH of 3.5-4.3, dissolved oxygen of 6.6-9.9 mg/L, iron of 1.9-5.4 mg/L, and aluminum of 0.8-1.9 mg/L flooded each cell to a depth 0.65 m above the treatment substrates, percolated through the substrates to underlying, perforated outflow pipes, and then flowed through the aerobic pond and wetland before discharging to the Schuylkill River. Data on the flow rates and chemistry of the effluent for the treatment system indicated substantial neutralization by the calcitic limestone but only marginal effects from the dolomitic limestone or compost. Because of its higher transmissivity, the treatment cell containing only limestone neutralized greater quantities of acidity than the cell containing compost and limestone. On average, the treatment system removed 62% of the influent acidity, 47% of the dissolved iron, 34% of the dissolved aluminum, and 8% of the dissolved manganese. Prior to treatment of the Bell Discharge, the Schuylkill River immediately below its confluence with the discharge had p

  9. RAYLEIGH-TAYLOR TYPE INSTABILITIES IN THE RECONNECTION EXHAUST JET AS A MECHANISM FOR SUPRA-ARCADE DOWNFLOWS IN THE SUN

    SciTech Connect

    Guo, L.-J.; Huang, Y.-M.; Bhattacharjee, A.; Innes, D. E. E-mail: amitava@princeton.edu E-mail: innes@mps.mpg.de

    2014-12-01

    Supra-arcade downflows (hereafter referred to as SADs) are low-emission, elongated, finger-like features observed in active region coronae above post-eruption flare arcades. Observations exhibit downward moving SADs intertwined with bright upward growing spikes. Whereas SADs are dark voids, spikes are brighter, denser structures. Although SADs have been observed for more than a decade, the mechanism of the formation of SADs remains an open issue. Using three-dimensional resistive magnetohydrodynamic simulations, we demonstrate that Rayleigh-Taylor-type instabilities develop in the downstream region of a reconnecting current sheet. The instabilities result in the formation of low-density coherent structures that resemble SADs, and high-density structures that appear to be spike-like. Comparison between the simulation results and observations suggests that Rayleigh-Taylor-type instabilities in the exhaust of reconnecting current sheets provide a plausible mechanism for observed SADs.

  10. Rayleigh-Taylor Type Instabilities in the Reconnection Exhaust Jet as a Mechanism for Supra-arcade Downflows in the Sun

    NASA Astrophysics Data System (ADS)

    Guo, L.-J.; Huang, Y.-M.; Bhattacharjee, A.; Innes, D. E.

    2014-12-01

    Supra-arcade downflows (hereafter referred to as SADs) are low-emission, elongated, finger-like features observed in active region coronae above post-eruption flare arcades. Observations exhibit downward moving SADs intertwined with bright upward growing spikes. Whereas SADs are dark voids, spikes are brighter, denser structures. Although SADs have been observed for more than a decade, the mechanism of the formation of SADs remains an open issue. Using three-dimensional resistive magnetohydrodynamic simulations, we demonstrate that Rayleigh-Taylor-type instabilities develop in the downstream region of a reconnecting current sheet. The instabilities result in the formation of low-density coherent structures that resemble SADs, and high-density structures that appear to be spike-like. Comparison between the simulation results and observations suggests that Rayleigh-Taylor-type instabilities in the exhaust of reconnecting current sheets provide a plausible mechanism for observed SADs.

  11. Evaluation of the resilience of a full-scale down-flow hanging sponge reactor to long-term outages at a sewage treatment plant in India.

    PubMed

    Onodera, Takashi; Takayama, Daisuke; Ohashi, Akiyoshi; Yamaguchi, Takashi; Uemura, Shigeki; Harada, Hideki

    2016-10-01

    Resilience to process outages is an essential requirement for sustainable wastewater treatment systems in developing countries. In this study, we evaluated the ability of a full-scale down-flow hanging sponge (DHS) reactor to recover after a 10-day outage. The DHS tested in this study uses polyurethane sponge as packing material. This full-scale DHS reactor has been tested over a period of about 4 years in India with a flow rate of 500 m(3)/day. Water was not supplied to the DHS reactor that was subjected to the 10-day outage; however, the biomass did not dry out because the sponge was able to retain enough water. Soon after the reactor was restarted, a small quantity of biomass, amounting to only 0.1% of the total retained biomass, was eluted. The DHS effluent achieved satisfactory removal of suspended solids, chemical oxygen demand, and ammonium nitrogen within 90, 45, and 90 min, respectively. Conversely, fecal coliforms in the DHS effluent did not reach satisfactory levels within 540 min; instead, the normal levels of fecal coliforms were achieved within 3 days. Overall, the tests demonstrated that the DHS reactor was sufficiently robust to withstand long-term outages and achieved steady state soon after restart. This reinforces the suitability of this technology for developing countries. PMID:27450993

  12. Biological oxidation of Mn(II) coupled with nitrification for removal and recovery of minor metals by downflow hanging sponge reactor.

    PubMed

    Cao, Linh Thi Thuy; Kodera, Hiroya; Abe, Kenichi; Imachi, Hiroyuki; Aoi, Yoshiteru; Kindaichi, Tomonori; Ozaki, Tomonori; Ohashi, Akiyoshi

    2015-01-01

    Biogenic manganese oxides (bio-MnO₂) have been shown to absorb minor metals. Bioreactor cultivation of heterotrophic manganese oxidizing bacteria (MnOB), which produce bio-MnO₂ via oxidation of Mn (II), can be expected to be involved in a promising system for removal and recovery of minor metals from wastewater. However, MnOB enrichment in wastewater treatment is difficult. This study investigated whether MnOB can be cultivated when coupled with nitrification in a system in which soluble microbial products (SMP) from nitrifiers are provided to MnOB as a substrate. A downflow hanging sponge (DHS) reactor was applied for MnOB cultivation with ammonium (NH₄⁺) and Mn (II) continuously supplied. During long-term operation, Mn (II) oxidation was successfully established at a rate of 48 g Mn m⁻³ d⁻¹ and bio-MnO₂ that formed on the sponges were recovered from the bottom of the reactor. The results also revealed that Ni and Co added to the influent were simultaneously removed. Microbial 16S rRNA gene clone analysis identified nitrifiers supporting MnOB growth and showed that only one clone of Bacillus subtilis, which was affiliated with a known MnOB cluster, was present, suggesting the existence of other novel bacteria with the ability to oxidize Mn (II).

  13. Evaluation of the resilience of a full-scale down-flow hanging sponge reactor to long-term outages at a sewage treatment plant in India.

    PubMed

    Onodera, Takashi; Takayama, Daisuke; Ohashi, Akiyoshi; Yamaguchi, Takashi; Uemura, Shigeki; Harada, Hideki

    2016-10-01

    Resilience to process outages is an essential requirement for sustainable wastewater treatment systems in developing countries. In this study, we evaluated the ability of a full-scale down-flow hanging sponge (DHS) reactor to recover after a 10-day outage. The DHS tested in this study uses polyurethane sponge as packing material. This full-scale DHS reactor has been tested over a period of about 4 years in India with a flow rate of 500 m(3)/day. Water was not supplied to the DHS reactor that was subjected to the 10-day outage; however, the biomass did not dry out because the sponge was able to retain enough water. Soon after the reactor was restarted, a small quantity of biomass, amounting to only 0.1% of the total retained biomass, was eluted. The DHS effluent achieved satisfactory removal of suspended solids, chemical oxygen demand, and ammonium nitrogen within 90, 45, and 90 min, respectively. Conversely, fecal coliforms in the DHS effluent did not reach satisfactory levels within 540 min; instead, the normal levels of fecal coliforms were achieved within 3 days. Overall, the tests demonstrated that the DHS reactor was sufficiently robust to withstand long-term outages and achieved steady state soon after restart. This reinforces the suitability of this technology for developing countries.

  14. Influence of plants on microbial activity in a vertical-downflow wetland system treating waste activated sludge with high organic matter concentrations.

    PubMed

    Wang, Runying; Baldy, Virginie; Périssol, Claude; Korboulewsky, Nathalie

    2012-03-01

    The rhizosphere is a key zone for pollutant removal in treatment wetlands; therefore, studies on microbial activity may provide helpful information for a better understanding of purification processes. We studied microbial activity in a vertical-downflow constructed wetland system treating waste activated sludge with high organic matter concentrations, under Mediterranean climate. The aims of the work were to study the influence of (i) the presence of plants, (ii) the plant species (Phragmites australis Cav., Typha latifolia L., Iris pseudacorus L.), and (iii) the plant growth stage (plant senescence and plant fast growing stage) on total respiration rate and phosphatase activity in the substrate (intented here as the solid support on which the plants grow). The presence of plants had a positive influence on microbial activity, since substrate respiration and both acid and alkaline phosphatase activity were always higher in planted than in unplanted mesocosms. Among the three tested species, Phragmites was the one that most stimulated both substrate respiration rate and phosphatase activity, followed by Typha and Iris. These differences of microbial activity between mesocosms were corresponding to differences of removal efficiency. Substrate respiration and phosphatase activity were of similar magnitude at the two growth stages, while the stimulating effect of plants seemed to have been delayed and microbial activity showed higher fluctuations at plant fast growing stage than at plant senescence.

  15. Protection of biomass from snail overgrazing in a trickling filter using sponge media as a biomass carrier: down-flow hanging sponge system.

    PubMed

    Onodera, Takashi; Syutsubo, Kazuaki; Yoochatchaval, Wilasinee; Sumino, Haruhiko; Mizuochi, Motoyuki; Harada, Hideki

    2015-01-01

    This study investigated down-flow hanging sponge (DHS) technology as a promising trickling filter (TF) using sponge media as a biomass carrier with an emphasis on protection of the biomass against macrofauna overgrazing. A pilot-scale DHS reactor fed with low-strength municipal sewage was operated under ambient temperature conditions for 1 year at a sewage treatment plant in Bangkok, Thailand. The results showed that snails (macrofauna) were present on the surface of the sponge media, but could not enter into it, because the sponge media with smaller pores physically protected the biomass from the snails. As a result, the sponge media maintained a dense biomass, with an average value of 22.3 gVSS/L sponge (58.1 gTSS/L sponge) on day 370. The snails could graze biomass on the surface of the sponge media. The DHS reactor process performance was also successful. The DHS reactor requires neither chemical treatments nor specific operations such as flooding for snail control. Overall, the results of this study indicate that the DHS reactor is able to protect biomass from snail overgrazing.

  16. Treatment of natural rubber processing wastewater using a combination system of a two-stage up-flow anaerobic sludge blanket and down-flow hanging sponge system.

    PubMed

    Tanikawa, D; Syutsubo, K; Hatamoto, M; Fukuda, M; Takahashi, M; Choeisai, P K; Yamaguchi, T

    2016-01-01

    A pilot-scale experiment of natural rubber processing wastewater treatment was conducted using a combination system consisting of a two-stage up-flow anaerobic sludge blanket (UASB) and a down-flow hanging sponge (DHS) reactor for more than 10 months. The system achieved a chemical oxygen demand (COD) removal efficiency of 95.7% ± 1.3% at an organic loading rate of 0.8 kg COD/(m(3).d). Bacterial activity measurement of retained sludge from the UASB showed that sulfate-reducing bacteria (SRB), especially hydrogen-utilizing SRB, possessed high activity compared with methane-producing bacteria (MPB). Conversely, the acetate-utilizing activity of MPB was superior to SRB in the second stage of the reactor. The two-stage UASB-DHS system can reduce power consumption by 95% and excess sludge by 98%. In addition, it is possible to prevent emissions of greenhouse gases (GHG), such as methane, using this system. Furthermore, recovered methane from the two-stage UASB can completely cover the electricity needs for the operation of the two-stage UASB-DHS system, accounting for approximately 15% of the electricity used in the natural rubber manufacturing process.

  17. Development of a sixth-generation down-flow hanging sponge (DHS) reactor using rigid sponge media for post-treatment of UASB treating municipal sewage.

    PubMed

    Onodera, Takashi; Tandukar, Madan; Sugiyana, Doni; Uemura, Shigeki; Ohashi, Akiyoshi; Harada, Hideki

    2014-01-01

    A sixth-generation down-flow hanging sponge reactor (DHS-G6), using rigid sponge media, was developed as a novel aerobic post-treatment unit for upflow anaerobic sludge blanket (UASB) treating municipal sewage. The rigid sponge media were manufactured by copolymerizing polyurethane with epoxy resin. The UASB and DHS system had a hydraulic retention time (HRT) of 10.6 h (8.6 h for UASB and 2 h for DHS) when operated at 10-28 °C. The system gave reasonable organic and nitrogen removal efficiencies. The final effluent had a total biochemical oxygen demand of only 12 mg/L and a total Kjeldahl nitrogen content of 6 mg/L. The DHS reactor gave particularly good nitrification performance, which was attributed to the new rigid sponge media. The sponge media helped to provide a sufficient HRT, and retained a high biomass concentration, extending the solids retention time. The DHS reactor maintained a high dissolved oxygen concentration under natural ventilation.

  18. Protection of biomass from snail overgrazing in a trickling filter using sponge media as a biomass carrier: down-flow hanging sponge system.

    PubMed

    Onodera, Takashi; Syutsubo, Kazuaki; Yoochatchaval, Wilasinee; Sumino, Haruhiko; Mizuochi, Motoyuki; Harada, Hideki

    2015-01-01

    This study investigated down-flow hanging sponge (DHS) technology as a promising trickling filter (TF) using sponge media as a biomass carrier with an emphasis on protection of the biomass against macrofauna overgrazing. A pilot-scale DHS reactor fed with low-strength municipal sewage was operated under ambient temperature conditions for 1 year at a sewage treatment plant in Bangkok, Thailand. The results showed that snails (macrofauna) were present on the surface of the sponge media, but could not enter into it, because the sponge media with smaller pores physically protected the biomass from the snails. As a result, the sponge media maintained a dense biomass, with an average value of 22.3 gVSS/L sponge (58.1 gTSS/L sponge) on day 370. The snails could graze biomass on the surface of the sponge media. The DHS reactor process performance was also successful. The DHS reactor requires neither chemical treatments nor specific operations such as flooding for snail control. Overall, the results of this study indicate that the DHS reactor is able to protect biomass from snail overgrazing. PMID:25746642

  19. Pilot-scale experiment of down-flow hanging sponge for direct treatment of low-strength municipal wastewater in Bangkok, Thailand.

    PubMed

    Onodera, Takashi; Yoochatchaval, Wilasinee; Sumino, Haruhiko; Mizuochi, Motoyuki; Okadera, Tomohiro; Fujita, Tsuyoshi; Banjongproo, Pathan; Syutsubo, Kazuaki

    2014-11-01

    A pilot-scale experiment of a down-flow hanging sponge (DHS) reactor for treatment of low-strength municipal wastewater was conducted over 1 year in Bangkok, Thailand, to establish an appropriate method for treatment under tropical climate conditions. Municipal wastewater with an average BOD of 19 mg/L was fed directly into the DHS reactor. Superior effluent quality (5.1 ± 3.4 mg/L TSS, 21.1 ± 9.0 mg/L COD, 2.8 ± 1.4 mg/L BOD, and 4.1 ± 1.0 mg/L TN) was achieved at a hydraulic retention time (HRT) of 1 h under an average temperature of 30 °C. The DHS reactor reached an actual HRT of 19.0 min, indicating good contact efficiency between wastewater and retained sludge. The DHS reactor retained dense sludge at 15.3-26.4 g VSS/L based on the sponge media volume. The sludge activity in terms of specific oxygen uptake rate was good. Excess sludge was produced as 0.051 g TSS/g COD removed (0.11 g TSS/g BOD removed), and a good SVI of 28 mL/g was observed. The sufficient performance was attributed to dense sludge with high activity, regardless of the low-strength wastewater. Overall, the DHS was advantageous owing to its simple operation, lack of operational problems, and low power consumption. PMID:24817263

  20. Treatment of natural rubber processing wastewater using a combination system of a two-stage up-flow anaerobic sludge blanket and down-flow hanging sponge system.

    PubMed

    Tanikawa, D; Syutsubo, K; Hatamoto, M; Fukuda, M; Takahashi, M; Choeisai, P K; Yamaguchi, T

    2016-01-01

    A pilot-scale experiment of natural rubber processing wastewater treatment was conducted using a combination system consisting of a two-stage up-flow anaerobic sludge blanket (UASB) and a down-flow hanging sponge (DHS) reactor for more than 10 months. The system achieved a chemical oxygen demand (COD) removal efficiency of 95.7% ± 1.3% at an organic loading rate of 0.8 kg COD/(m(3).d). Bacterial activity measurement of retained sludge from the UASB showed that sulfate-reducing bacteria (SRB), especially hydrogen-utilizing SRB, possessed high activity compared with methane-producing bacteria (MPB). Conversely, the acetate-utilizing activity of MPB was superior to SRB in the second stage of the reactor. The two-stage UASB-DHS system can reduce power consumption by 95% and excess sludge by 98%. In addition, it is possible to prevent emissions of greenhouse gases (GHG), such as methane, using this system. Furthermore, recovered methane from the two-stage UASB can completely cover the electricity needs for the operation of the two-stage UASB-DHS system, accounting for approximately 15% of the electricity used in the natural rubber manufacturing process. PMID:27120630

  1. Pilot-scale experiment of down-flow hanging sponge for direct treatment of low-strength municipal wastewater in Bangkok, Thailand.

    PubMed

    Onodera, Takashi; Yoochatchaval, Wilasinee; Sumino, Haruhiko; Mizuochi, Motoyuki; Okadera, Tomohiro; Fujita, Tsuyoshi; Banjongproo, Pathan; Syutsubo, Kazuaki

    2014-11-01

    A pilot-scale experiment of a down-flow hanging sponge (DHS) reactor for treatment of low-strength municipal wastewater was conducted over 1 year in Bangkok, Thailand, to establish an appropriate method for treatment under tropical climate conditions. Municipal wastewater with an average BOD of 19 mg/L was fed directly into the DHS reactor. Superior effluent quality (5.1 ± 3.4 mg/L TSS, 21.1 ± 9.0 mg/L COD, 2.8 ± 1.4 mg/L BOD, and 4.1 ± 1.0 mg/L TN) was achieved at a hydraulic retention time (HRT) of 1 h under an average temperature of 30 °C. The DHS reactor reached an actual HRT of 19.0 min, indicating good contact efficiency between wastewater and retained sludge. The DHS reactor retained dense sludge at 15.3-26.4 g VSS/L based on the sponge media volume. The sludge activity in terms of specific oxygen uptake rate was good. Excess sludge was produced as 0.051 g TSS/g COD removed (0.11 g TSS/g BOD removed), and a good SVI of 28 mL/g was observed. The sufficient performance was attributed to dense sludge with high activity, regardless of the low-strength wastewater. Overall, the DHS was advantageous owing to its simple operation, lack of operational problems, and low power consumption.

  2. Secondary Rayleigh-Taylor Instabilities in the Reconnection Exhaust Jet: A Mechanism for Supra-Arcade Downflows in the Solar Corona

    NASA Astrophysics Data System (ADS)

    Guo, L.; Bhattacharjee, A.; Huang, Y. M.; Innes, D.

    2014-12-01

    Supra-arcade downflows (hereafter referred to as SADs) are low-emission, elongated, finger-like features usually observed in active-region coronae above post-eruption flare arcades. Observations exhibit downward moving SADs intertwined with bright, upward moving spikes. Whereas SADs are dark voids, spikes are brighter, denser structures. Although SADs have been observed for decades, the mechanism for formation of SADs remains an open issue. Using high-Lundquist-number three-dimensional resistive MHD simulations, we demonstrate that secondary Rayleigh-Taylor type instabilities develop in the downstream region of a reconnecting current sheet. The instability results in the formation of low-density coherent structures that resemble SADs, intertwined with high-density structures that appear to be spike-like. Using SDO/AIA images, we highlight features that have been previously unexplained, such as the splitting of SADs at their heads, but are a natural consequence of instabilities above the arcade. Comparison with siumlations suggest that secondary Rayleigh-Taylor type instabilities in the exhaust of reconnecting current sheets provide a plausible mechanism for observed SADs and spikes. Although the plasma conditions are vastly different, analogous phenomena also occur in the Earth's magnetotail during reconnection.

  3. Long-term performance evaluation of down-flow hanging sponge reactor regarding nitrification in a full-scale experiment in India.

    PubMed

    Onodera, Takashi; Okubo, Tsutomu; Uemura, Shigeki; Yamaguchi, Takashi; Ohashi, Akiyoshi; Harada, Hideki

    2016-03-01

    The first full-scale down-flow hanging sponge (DHS) reactor applied to post-treatment of effluent from an upflow anaerobic sludge blanket (UASB) reactor for the treatment of municipal sewage was evaluated, with emphasis on nitrification. The full-scale DHS reactor was successfully operated at a hydraulic retention time of 1.5h for over 1800 days in India. The DHS reactor produced effluent with 6 mg L(-1) ammonium nitrogen, corresponding to 79% removal efficiency. The total nitrogen removal by the DHS reactor was 65%. The high process performance of the DHS reactor was supported by its distinctive characteristics of (1) high dissolved oxygen of 5.4 mg L(-1) in the DHS effluent without forced ventilation, (2) dense retained sludge in the range of 23-46 gVSS Lsponge(-1), and (3) adequate sludge activity of 52 mgN gVSS(-1) day(-1) for nitrification. The full-scale experiment has proven that the DHS reactor has practical applicability to developing countries.

  4. Field evaluation of wood bark-based down-flow biofilters for mitigation of odor, ammonia, and hydrogen sulfide emissions from confined swine nursery barns.

    PubMed

    Kafle, Gopi Krishna; Chen, Lide; Neibling, Howard; Brian He, B

    2015-01-01

    Two down-flow wood bark-based biofilters were evaluated for their effectiveness in treating odor, NH3 and H2S under actual swine farm conditions. The water requirement for maintaining proper media moisture contents (MC) under different ventilation rates and intervals were determined. The effect of media depth and MC on the biofilters' performance was also evaluated. The aerodynamic resistance on biofilters was studied using computational fluid dynamics (CFD) software. Water requirements for biofilters were obtained in the range of 3.8-556.0 L/m(3)/d for ventilation duration of 1-24 h/d (depending on the age of the pig and environmental conditions). The highest reductions in odor, NH3 and H2S, obtained in this study at empty bed residence times (EBRT) of 1.6-3.1 s, were 73.5-76.9%, 95.2-97.9% and 95.8-100.0%, respectively. The pressure drop was 28.8-68.8 Pa for a media depth of 381 mm at an EBRT of 1.6-3.1 s and an MC of 64-65%. The pressure drop followed a secondary order polynomial line with both airflow rate and media MC (R(2) = 0.927-0.982). The results of odor, NH3 and H2S reduction efficiency and pressure drop suggest a media depth of ≥254 mm, MC ≥ 35-50% and EBRT of 2-3 s for successful operations of the wood bark-based biofilters. A high correlation was found between the measured and predicted pressured drops obtained using CFD software (R(2) = 0.921, RMSE = 0.145).

  5. BMP FILTERS: UPFLOW VS. DOWNFLOW

    EPA Science Inventory

    Filtration methods have been found to be effective in reducing pollutant levels in stormwater. The main drawback of these methods is that the filters get clogged frequently and require periodical maintenance. In stormwater treatment, because of the cost of pumping, the filters ar...

  6. On-site evaluation of the performance of a full-scale down-flow hanging sponge reactor as a post-treatment process of an up-flow anaerobic sludge blanket reactor for treating sewage in India.

    PubMed

    Okubo, Tsutomu; Onodera, Takashi; Uemura, Shigeki; Yamaguchi, Takashi; Ohashi, Akiyoshi; Harada, Hideki

    2015-10-01

    A down-flow hanging sponge (DHS) reactor is a novel, unaerated, aerobic, biofilm reactor that is used to polish effluent received from an up-flow anaerobic sludge blanket (UASB) reactor for treating municipal sewage. A full-scale DHS reactor was constructed for post-treatment of a full-scale UASB reactor at a municipal sewage treatment plant in India. Performance of the DHS reactor was evaluated with respect to organic removal over 1800 days of continuous operation. The UASB+DHS system consistently produced effluent with chemical oxygen demand (COD), biochemical oxygen demand (BOD), and suspended solids (SS) values of 37, 6.0 and 19 mg L(-1), on average, respectively. The sludge yield of the DHS reactor was estimated to be 0.04 kg SS kg(-1) COD removed or 0.12 kg SS kg(-1) BOD removed, which is considerably lower than other aerobic treatment methods that have been employed for polishing UASB effluent.

  7. Laboratory Tests

    MedlinePlus

    Laboratory tests check a sample of your blood, urine, or body tissues. A technician or your doctor ... compare your results to results from previous tests. Laboratory tests are often part of a routine checkup ...

  8. Development of a new non-aeration-based sewage treatment technology: Performance evaluation of a full-scale down-flow hanging sponge reactor employing third-generation sponge carriers.

    PubMed

    Okubo, Tsutomu; Kubota, Kengo; Yamaguchi, Takashi; Uemura, Shigeki; Harada, Hideki

    2016-10-01

    A practical-scale down-flow hanging sponge (DHS) reactor using third-generation (G3) sponge carriers was applied for treatment of the effluent from an up-flow anaerobic sludge blanket (UASB) reactor treating municipal sewage. The process performance of the DHS reactor filled with G3 sponge carriers (DHS-G3) was evaluated by conducting an on-site experiment in India over one year. The performance of the DHS-G3 for removal of organic matter and ammonium-nitrogen at a relatively short hydraulic retention time (HRT) of only 0.66 h satisfied the Indian effluent quality standards except for fecal coliform. The removal rate constants for total biochemical oxygen demand (BOD) and fecal coliform determined based on the water quality profiles along the DHS-G3 almost reached equilibrium approximately four months after the start of operation, i.e., 2.45 h(-1) for BOD and 2.30 h(-1) for fecal coliform, respectively. The oxygen utilization activity of retained sludge was determined to assess the distribution of heterotrophic and autotrophic bacteria along the DHS-G3. Nitrification was promoted in the lower portion of the DHS-G3 reactor in the duration with low organic load, while it decreased when the organic load was increased, probably due to proliferation of heterotrophic bacteria. PMID:27340815

  9. Performance evaluation of the sulfur-redox-reaction-activated up-flow anaerobic sludge blanket and down-flow hanging sponge anaerobic/anoxic sequencing batch reactor system for municipal sewage treatment.

    PubMed

    Hatamoto, Masashi; Ohtsuki, Kota; Maharjan, Namita; Ono, Shinya; Dehama, Kazuya; Sakamoto, Kenichi; Takahashi, Masanobu; Yamaguchi, Takashi

    2016-03-01

    A sulfur-redox-reaction-activated up-flow anaerobic sludge blanket (UASB) and down-flow hanging sponge (DHS) system, combined with an anaerobic/anoxic sequencing batch reactor (A2SBR), has been used for municipal sewage treatment for over 2 years. The present system achieved a removal rate of 95±14% for BOD, 74±22% for total nitrogen, and 78±25% for total phosphorus, including low water temperature conditions. Sludge conversion rates during the operational period were 0.016 and 0.218 g-VSS g-COD-removed(-1) for the UASB, and DHS, respectively, which are similar to a conventional UASB-DHS system, which is not used of sulfur-redox-reaction, for sewage treatment. Using the sulfur-redox reaction made advanced treatment of municipal wastewater with minimal sludge generation possible, even in winter. Furthermore, the occurrence of a unique phenomenon, known as the anaerobic sulfur oxidation reaction, was confirmed in the UASB reactor under the winter season. PMID:26773951

  10. Performance evaluation of the sulfur-redox-reaction-activated up-flow anaerobic sludge blanket and down-flow hanging sponge anaerobic/anoxic sequencing batch reactor system for municipal sewage treatment.

    PubMed

    Hatamoto, Masashi; Ohtsuki, Kota; Maharjan, Namita; Ono, Shinya; Dehama, Kazuya; Sakamoto, Kenichi; Takahashi, Masanobu; Yamaguchi, Takashi

    2016-03-01

    A sulfur-redox-reaction-activated up-flow anaerobic sludge blanket (UASB) and down-flow hanging sponge (DHS) system, combined with an anaerobic/anoxic sequencing batch reactor (A2SBR), has been used for municipal sewage treatment for over 2 years. The present system achieved a removal rate of 95±14% for BOD, 74±22% for total nitrogen, and 78±25% for total phosphorus, including low water temperature conditions. Sludge conversion rates during the operational period were 0.016 and 0.218 g-VSS g-COD-removed(-1) for the UASB, and DHS, respectively, which are similar to a conventional UASB-DHS system, which is not used of sulfur-redox-reaction, for sewage treatment. Using the sulfur-redox reaction made advanced treatment of municipal wastewater with minimal sludge generation possible, even in winter. Furthermore, the occurrence of a unique phenomenon, known as the anaerobic sulfur oxidation reaction, was confirmed in the UASB reactor under the winter season.

  11. Laboratory Building.

    SciTech Connect

    Herrera, Joshua M.

    2015-03-01

    This report is an analysis of the means of egress and life safety requirements for the laboratory building. The building is located at Sandia National Laboratories (SNL) in Albuquerque, NM. The report includes a prescriptive-based analysis as well as a performance-based analysis. Following the analysis are appendices which contain maps of the laboratory building used throughout the analysis. The top of all the maps is assumed to be north.

  12. LANGUAGE LABORATORIES.

    ERIC Educational Resources Information Center

    BRUBAKER, CHARLES WILLIAM

    THE USE OF THE LANGUAGE LABORATORY HAS GIVEN MANY THOUSANDS OF INDIVIDUALS GOOD LISTENING AND SPEAKING PRACTICE AND HAS BECOME AN EFFECTIVE LEARNING TOOL. THE BASIC PIECE OF EQUIPMENT OF THE LANGUAGE LABORATORY IS THE TAPE RECORDER-AND-PLAYBACK, DESIGNED TO BE USED WITH AUDIOPASSIVE STUDY, AUDIOACTIVE STUDY, AUDIOACTIVE-COMPARATIVE STUDY, AND…

  13. Learning Laboratory.

    ERIC Educational Resources Information Center

    Hay, Lyn; Callison, Daniel

    2000-01-01

    Considers the school library media center as an information learning laboratory. Topics include information literacy; Kuhlthau's Information Search Process model; inquiry theory and approach; discovery learning; process skills of laboratory science; the information scientist; attitudes of media specialists, teachers, and students; displays and Web…

  14. Laboratory Tests

    MedlinePlus

    ... Home Medical Devices Products and Medical Procedures In Vitro Diagnostics Lab Tests Laboratory Tests Share Tweet Linkedin ... Approved Home and Lab Tests Find All In Vitro Diagnostic Products and Decision Summaries Since November 2003 ...

  15. Lunar laboratory

    SciTech Connect

    Keaton, P.W.; Duke, M.B.

    1986-01-01

    An international research laboratory can be established on the Moon in the early years of the 21st Century. It can be built using the transportation system now envisioned by NASA, which includes a space station for Earth orbital logistics and orbital transfer vehicles for Earth-Moon transportation. A scientific laboratory on the Moon would permit extended surface and subsurface geological exploration; long-duration experiments defining the lunar environment and its modification by surface activity; new classes of observations in astronomy; space plasma and fundamental physics experiments; and lunar resource development. The discovery of a lunar source for propellants may reduce the cost of constructing large permanent facilities in space and enhance other space programs such as Mars exploration. 29 refs.

  16. Laboratory accreditation

    SciTech Connect

    Pettit, R.B.

    1998-08-01

    Accreditation can offer many benefits to a testing or calibration laboratory, including increased marketability of services, reduced number of outside assessments, and improved quality of services. Compared to ISO 9000 registration, the accreditation process includes a review of the entire quality system, but in addition a review of testing or calibration procedures by a technical expert and participation in proficiency testing in the areas of accreditation. Within the DOE, several facilities have recently become accredited in the area of calibration, including Sandia National Laboratories, Oak Ridge, AlliedSignal FM and T; Lockheed Martin Idaho Technologies Co., and Pacific Northwest National Lab. At the national level, a new non-profit organization was recently formed called the National Cooperation for Laboratory Accreditation (NACLA). The goal of NACLA is to develop procedures, following national and international requirements, for the recognition of competent accreditation bodies in the US. NACLA is a voluntary partnership between the public and private sectors with the goal of a test or calibration performed once and accepted world wide. The NACLA accreditation body recognition process is based on the requirements of ISO Guide 25 and Guide 58. A membership drive will begin some time this fall to solicit organizational members and an election of a permanent NACLA Board of Directors will follow later this year or early 1999.

  17. Theme: Laboratory Facilities Improvement.

    ERIC Educational Resources Information Center

    Miller, Glen M.; And Others

    1993-01-01

    Includes "Laboratory Facilities Improvement" (Miller); "Remodeling Laboratories for Agriscience Instruction" (Newman, Johnson); "Planning for Change" (Mulcahy); "Laboratory Facilities Improvement for Technology Transfer" (Harper); "Facilities for Agriscience Instruction" (Agnew et al.); "Laboratory Facility Improvement" (Boren, Dwyer); and…

  18. When Is a Laboratory a Laboratory?

    ERIC Educational Resources Information Center

    Roy, Ken

    1999-01-01

    Gives advice on the legal necessity of safety planning for school science (or other) laboratories. Recommends looking into governmental definitions of the term "laboratory" to determine which educational activities should be covered by safety planning. (WRM)

  19. Chemistry Laboratory Safety Check

    ERIC Educational Resources Information Center

    Patnoe, Richard L.

    1976-01-01

    An accident prevention/safety check list for chemistry laboratories is printed. Included are checks of equipment, facilities, storage and handling of chemicals, laboratory procedures, instruction procedures, and items to be excluded from chemical laboratories. (SL)

  20. [Theme: Using Laboratories.

    ERIC Educational Resources Information Center

    Pritchard, Jack; Braker, Clifton

    1982-01-01

    Pritchard discusses the opportunities for applied learning afforded by laboratories. Braker describes the evaluation of cognitive, affective, and psychomotor skills in the agricultural mechanics laboratory. (SK)

  1. Laboratory Information Systems.

    PubMed

    Henricks, Walter H

    2015-06-01

    Laboratory information systems (LISs) supply mission-critical capabilities for the vast array of information-processing needs of modern laboratories. LIS architectures include mainframe, client-server, and thin client configurations. The LIS database software manages a laboratory's data. LIS dictionaries are database tables that a laboratory uses to tailor an LIS to the unique needs of that laboratory. Anatomic pathology LIS (APLIS) functions play key roles throughout the pathology workflow, and laboratories rely on LIS management reports to monitor operations. This article describes the structure and functions of APLISs, with emphasis on their roles in laboratory operations and their relevance to pathologists.

  2. An Electronics "Unit Laboratory"

    ERIC Educational Resources Information Center

    Davies, E. R.; Penton, S. J.

    1976-01-01

    Describes a laboratory teaching technique in which a single topic (in this case, bipolar junction transistors) is studied over a period of weeks under the supervision of one staff member, who also designs the laboratory work. (MLH)

  3. Successful Laboratory Assessment.

    ERIC Educational Resources Information Center

    Doran, Rodney L.; And Others

    1992-01-01

    Describes the selection and implementation of an authentic assessment model for evaluating students' science laboratory knowledge and skills. Provides sample problems and a scoring form for the performance-based science laboratory test. (MDH)

  4. EPA Environmental Chemistry Laboratory

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The Environmental Protection Agency's (EPA) Chemistry Laboratory (ECL) is a national program laboratory specializing in residue chemistry analysis under the jurisdiction of the EPA's Office of Pesticide Programs in Washington, D.C. At Stennis Space Center, the laboratory's work supports many federal anti-pollution laws. The laboratory analyzes environmental and human samples to determine the presence and amount of agricultural chemicals and related substances. Pictured, ECL chemists analyze environmental and human samples for the presence of pesticides and other pollutants.

  5. Employment at National Laboratories

    SciTech Connect

    E. S. Peterson; C. A. Allen

    2007-04-01

    Scientists enter the National Laboratory System for many different reasons. For some, faculty positions are scarce, so they take staff-scientist position at national laboratories (i.e. Pacific Northwest, Idaho, Los Alamos, and Brookhaven). Many plan to work at the National Laboratory for 5 to 7 years and then seek an academic post. For many (these authors included), before they know it it’s 15 or 20 years later and they never seriously considered leaving the laboratory system.

  6. INL Laboratory Scale Atomizer

    SciTech Connect

    C.R. Clark; G.C. Knighton; R.S. Fielding; N.P. Hallinan

    2010-01-01

    A laboratory scale atomizer has been built at the Idaho National Laboratory. This has proven useful for laboratory scale tests and has been used to fabricate fuel used in the RERTR miniplate experiments. This instrument evolved over time with various improvements being made ‘on the fly’ in a trial and error process.

  7. Undergraduate Chemistry Laboratory

    ERIC Educational Resources Information Center

    Bretz, Stacey Lowery; Fay, Michael; Bruck, Laura B.; Towns, Marcy H.

    2013-01-01

    Forty chemistry faculty from American Chemical Society-approved departments were interviewed to determine their goals for undergraduate chemistry laboratory. Faculty were stratified by type of institution, departmental success with regard to National Science Foundation funding for laboratory reform, and level of laboratory course. Interview…

  8. Laboratory Ventilation and Safety.

    ERIC Educational Resources Information Center

    Steere, Norman V.

    1965-01-01

    In order to meet the needs of both safety and economy, laboratory ventilation systems must effectively remove air-borne toxic and flammable materials and at the same time exhaust a minimum volume of air. Laboratory hoods are the most commonly used means of removing gases, dusts, mists, vapors, and fumed from laboratory operations. To be effective,…

  9. Laboratory Activities in Israel

    ERIC Educational Resources Information Center

    Mamlok-Naaman, Rachel; Barnea, Nitza

    2012-01-01

    Laboratory activities have long had a distinctive and central role in the science curriculum, and science educators have suggested that many benefits accrue from engaging students in science laboratory activities. Many research studies have been conducted to investigate the educational effectiveness of laboratory work in science education in…

  10. Laboratory Equipment Criteria.

    ERIC Educational Resources Information Center

    State Univ. Construction Fund, Albany, NY.

    Requirements for planning, designing, constructing and installing laboratory furniture are given in conjunction with establishing facility criteria for housing laboratory equipment. Furniture and equipment described include--(1) center tables, (2) reagent racks, (3) laboratory benches and their mechanical fixtures, (4) sink and work counters, (5)…

  11. Improving Laboratory Efficiency.

    ERIC Educational Resources Information Center

    Shively, Michael Jay

    1979-01-01

    Factors that influence the efficiency of laboratory experiences include: size of laboratory group, length of session, discussion, special tools, and applications of knowledge learned. It is suggested that these variables may be altered to insure that students gain from their time spent in the laboratory. (BH)

  12. Theme: Laboratory Instruction.

    ERIC Educational Resources Information Center

    Bruening, Thomas H.; And Others

    1992-01-01

    A series of theme articles discuss setting up laboratory hydroponics units, the school farm at the Zuni Pueblo in New Mexico, laboratory experiences in natural resources management and urban horticulture, the development of teaching labs at Derry (PA) High School, management of instructional laboratories, and industry involvement in agricultural…

  13. The Instructional Development Laboratory.

    ERIC Educational Resources Information Center

    Towle, Nelson J.

    The Instructional Development Laboratory of Florida State University's Center for Educational Design (CED) is described. Among the major projects of the Laboratory has been the design and implementation of the PLATO computer-assisted instruction system. Included in the report are descriptions of (1) the facilities layout of the Laboratory, (2) the…

  14. Good Laboratory Practice

    NASA Astrophysics Data System (ADS)

    Hadjicostas, Evsevios

    The principles of Good Laboratory Practice (GLP) in conjunction with the principles of Total Quality Management (see chapter 6) ensure the quality and reliability of the laboratory results, which in turn help to ensure the protection of the environment and human health and safety. A step further is the accreditation of laboratories to ISO 17025 (see chapter 2) to perform specified activities.

  15. Skylab mobile laboratory

    NASA Technical Reports Server (NTRS)

    Primeaux, G. R.; Larue, M. A.

    1975-01-01

    The Skylab mobile laboratory was designed to provide the capability to obtain necessary data on the Skylab crewmen 30 days before lift-off, within 1 hour after recovery, and until preflight physiological baselines were reattained. The mobile laboratory complex consisted of six laboratories that supported cardiovascular, metabolic, nutrition and endocrinology, operational medicine, blood, and microbiology experiments; a utility package; and two shipping containers. The objectives and equipment requirements of the Skylab mobile laboratory and the data acquisition systems are discussed along with processes such as permanently mounting equipment in the individual laboratories and methods of testing and transporting the units. The operational performance, in terms of amounts of data collected, and the concept of mobile laboratories for medical and scientific experiments are evaluated. The Skylab mobile laboratory succeeded in facilitating the data collection and sample preservation associated with the three Skylab manned flights.

  16. Standards Laboratory environments

    SciTech Connect

    Braudaway, D.W.

    1990-09-01

    Standards Laboratory environments need to be carefully selected to meet the specific mission of each laboratory. The mission of the laboratory depends on the specific work supported, the measurement disciplines required and the level of uncertainty required in the measurements. This document reproduces the contents of the Sandia National Laboratories Primary Standards Laboratory Memorandum Number 3B (PSLM-3B) which was issued on May 16, 1988, under the auspices of the Department of Energy, Albuquerque Operations Office, to guide the laboratories of the Nuclear Weapons Complex in selecting suitable environments. Because of both general interest and specific interest in Standards Laboratory environments this document is being issued in a more available form. The purpose of this document is to provide guidance in selection of laboratory environments suitable for standards maintenance and calibration operations. It is not intended to mandate a specific environment for a specific calibration but to direct selection of the environment and to offer suggestions on how to extend precision in an existing and/or achievable (practical) environment. Although this documents pertains specifically to standards laboratories, it can be applied to any laboratory requiring environmental control.

  17. Medical Laboratory Assistant. Laboratory Occupations Cluster.

    ERIC Educational Resources Information Center

    Michigan State Univ., East Lansing. Coll. of Agriculture and Natural Resources Education Inst.

    This task-based curriculum guide for medical laboratory assistant is intended to help the teacher develop a classroom management system where students learn by doing. Introductory materials include a Dictionary of Occupational Titles job code and title sheet, a career ladder, a matrix relating duty/task numbers to job titles, and a task list. Each…

  18. Sandia National Laboratories

    NASA Technical Reports Server (NTRS)

    Gilliom, Laura R.

    1992-01-01

    Sandia National Laboratories has identified technology transfer to U.S. industry as a laboratory mission which complements our national security mission and as a key component of the Laboratory's future. A number of technology transfer mechanisms - such as CRADA's, licenses, work-for-others, and consortia - are identified and specific examples are given. Sandia's experience with the Specialty Metals Processing Consortium is highlighted with a focus on the elements which have made it successful. A brief discussion of Sandia's potential interactions with NASA under the Space Exploration Initiative was included as an example of laboratory-to-NASA technology transfer. Viewgraphs are provided.

  19. Laboratory Astrophysics White Paper

    NASA Technical Reports Server (NTRS)

    Brickhouse, Nancy; Federman, Steve; Kwong, Victor; Salama, Farid; Savin, Daniel; Stancil, Phillip; Weingartner, Joe; Ziurys, Lucy

    2006-01-01

    Laboratory astrophysics and complementary theoretical calculations are the foundations of astronomical and planetary research and will remain so for many generations to come. From the level of scientific conception to that of the scientific return, it is our understanding of the underlying processes that allows us to address fundamental questions regarding the origins and evolution of galaxies, stars, planetary systems, and life in the cosmos. In this regard, laboratory astrophysics is much like detector and instrument development at NASA and NSF; these efforts are necessary for the astronomical research being funded by the agencies. The NASA Laboratory Astrophysics Workshop met at the University of Nevada, Las Vegas (UNLV) from 14-16 February, 2006 to identify the current laboratory data needed to support existing and future NASA missions and programs in the Astrophysics Division of the Science Mission Directorate (SMD). Here we refer to both laboratory and theoretical work as laboratory astrophysics unless a distinction is necessary. The format for the Workshop involved invited talks by users of laboratory data, shorter contributed talks and poster presentations by both users and providers that highlighted exciting developments in laboratory astrophysics, and breakout sessions where users and providers discussed each others' needs and limitations. We also note that the members of the Scientific Organizing Committee are users as well as providers of laboratory data. As in previous workshops, the focus was on atomic, molecular, and solid state physics.

  20. Biotechnology Laboratory Methods.

    ERIC Educational Resources Information Center

    Davis, Robert H.; Kompala, Dhinakar S.

    1989-01-01

    Describes a course entitled "Biotechnology Laboratory" which introduces a variety of laboratory methods associated with biotechnology. Describes the history, content, and seven experiments of the course. The seven experiments are selected from microbiology and molecular biology, kinetics and fermentation, and downstream processing-bioseparations.…

  1. Laboratory for Oceans

    NASA Technical Reports Server (NTRS)

    1988-01-01

    A review is made of the activities of the Laboratory for Oceans. The staff and the research activities are nearly evenly divided between engineering and scientific endeavors. The Laboratory contributes engineering design skills to aircraft and ground based experiments in terrestrial and atmospheric sciences in cooperation with scientists from labs in Earth sciences.

  2. The Virtual Robotics Laboratory

    SciTech Connect

    Kress, R.L.; Love, L.J.

    1999-09-01

    The growth of the Internet has provided a unique opportunity to expand research collaborations between industry, universities, and the national laboratories. The Virtual Robotics Laboratory (VRL) is an innovative program at Oak Ridge National Laboratory (ORNL) that is focusing on the issues related to collaborative research through controlled access of laboratory equipment using the World Wide Web. The VRL will provide different levels of access to selected ORNL laboratory secondary education programs. In the past, the ORNL Robotics and Process Systems Division has developed state-of-the-art robotic systems for the Army, NASA, Department of Energy, Department of Defense, as well as many other clients. After proof of concept, many of these systems sit dormant in the laboratories. This is not out of completion of all possible research topics. but from completion of contracts and generation of new programs. In the past, a number of visiting professors have used this equipment for their own research. However, this requires that the professor, and possibly his/her students, spend extended periods at the laboratory facility. In addition, only a very exclusive group of faculty can gain access to the laboratory and hardware. The VRL is a tool that enables extended collaborative efforts without regard to geographic limitations.

  3. On National Laboratory Organization.

    ERIC Educational Resources Information Center

    Miller, James O.; And Others

    This paper discusses the problems and issues involved in the organizational structure of the National Laboratory on Early Childhood Education. The National Laboratory, which consisted of a coordination center and six university based research and development centers, was organized for the purpose of planning, sponsoring and conducting research and…

  4. The Virtual Robotics Laboratory

    SciTech Connect

    Kress, R.L.; Love, L.J.

    1997-03-01

    The growth of the Internet has provided a unique opportunity to expand research collaborations between industry, universities, and the national laboratories. The Virtual Robotics Laboratory (VRL) is an innovative program at Oak Ridge National Laboratory (ORNL) that is focusing on the issues related to collaborative research through controlled access of laboratory equipment using the World Wide Web. The VRL will provide different levels of access to selected ORNL laboratory equipment to outside universities, industrial researchers, and elementary and secondary education programs. In the past, the ORNL Robotics and Process Systems Division (RPSD) has developed state-of-the-art robotic systems for the Army, NASA, Department of Energy, Department of Defense, as well as many other clients. After proof of concept, many of these systems sit dormant in the laboratories. This is not out of completion of all possible research topics, but from completion of contracts and generation of new programs. In the past, a number of visiting professors have used this equipment for their own research. However, this requires that the professor, and possibly his students, spend extended periods at the laboratory facility. In addition, only a very exclusive group of faculty can gain access to the laboratory and hardware. The VRL is a tool that enables extended collaborative efforts without regard to geographic limitations.

  5. Quality in Teaching Laboratories.

    ERIC Educational Resources Information Center

    Stubington, John F.

    1995-01-01

    Describes a Japanese process-oriented approach called KAIZEN for improving the quality of existing teaching laboratories. It provides relevant quality measurements and indicates how quality can be improved. Use of process criteria sidesteps the difficulty of defining quality for laboratory experiments and allows separation of student assessment…

  6. Hoods for Science Laboratories.

    ERIC Educational Resources Information Center

    Horowitz, Harold; and others

    Detailed discussions are presented dealing with the selection and design of fume hoods for science laboratories. Areas covered include--(1) air flow design, (2) materials properties, (3) location in the laboratory, (4) testing and adjustment, (5) exhaust systems, and (6) hazards of fume discharges. (JT)

  7. Dental Laboratory Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of dental laboratory technician, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 8 units to the occupation of dental laboratory technician. The following skill areas…

  8. Independent vs. Laboratory Papers.

    ERIC Educational Resources Information Center

    Wilson, Clint C., II

    1981-01-01

    Comparisons of independent and laboratory newspapers at selected California colleges indicated that (1) the independent newspapers were superior in editorial opinion and leadership characteristics; (2) the laboratory newspapers made better use of photography, art, and graphics; and (3) professional journalists highly rated their laboratory…

  9. The Language Laboratory.

    ERIC Educational Resources Information Center

    Hocking, Elton

    This condensed article on the language laboratory describes educational and financial possibilities and limitations, often citing the foreign language program at Purdue University as an example. The author discusses: (1) costs and amortization, (2) preventive maintenance, (3) laboratory design, (4) the multichannel recorder, and (5) visuals. Other…

  10. Medical Laboratory Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of medical laboratory technician, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general and 8 units specific to the occupation of medical laboratory technician. The following…

  11. Tethered gravity laboratories study

    NASA Technical Reports Server (NTRS)

    Lucchetti, F.

    1989-01-01

    Information on the Tethered Gravity Laboratory on the International Space Station is given in viewgraph form. Topics covered include active control, low gravity processes identification, systems analysis, tether interfaces with the Laboratory, elevator and payload configurations, elevator subsystems, and accelerometer technology requirements.

  12. LANGUAGE ARTS LABORATORY.

    ERIC Educational Resources Information Center

    ROBERTS, HERMESE E.

    THE LANGUAGE ARTS LABORATORY WAS ESTABLISHED TO IMPROVE READING ABILITY AND OTHER LANGUAGE ARTS SKILLS AS AN AID IN THE PREVENTION OF DROPOUTS. THE LABORATORY WAS OPERATED ON A SUMMER SCHEDULE WITH A FLEXIBLE PROGRAM OF FROM 45 MINUTES TO 2 1/2 HOURS DAILY. ALL PUPILS WERE 14 YEARS OF AGE OR OLDER, AND EXPRESSED A DESIRE TO IMPROVE THEIR READING…

  13. Dental Laboratory Technology.

    ERIC Educational Resources Information Center

    Department of the Air Force, Washington, DC.

    The Air Force dental laboratory technology manual is designed as a basic training text as well as a reference source for dental laboratory technicians, a specialty occupation concerned with the design, fabrication, and repair of dental prostheses. Numerous instructive diagrams and photographs are included throughout the manual. The comprehensive…

  14. NVLAP calibration laboratory program

    SciTech Connect

    Cigler, J.L.

    1993-12-31

    This paper presents an overview of the progress up to April 1993 in the development of the Calibration Laboratories Accreditation Program within the framework of the National Voluntary Laboratory Accreditation Program (NVLAP) at the National Institute of Standards and Technology (NIST).

  15. Primary Standards Laboratory report

    SciTech Connect

    Not Available

    1990-12-01

    Sandia National Laboratories operates the Primary Standards Laboratory (PSL) for the Department of Energy, Albuquerque Operations Office (DOE/AL). This report summarizes metrology activities that received emphasis in the first half of 1990 and provides information pertinent to the operation of the DOE/AL system-wide Standards and Calibration Program.

  16. [Accreditation of medical laboratories].

    PubMed

    Horváth, Andrea Rita; Ring, Rózsa; Fehér, Miklós; Mikó, Tivadar

    2003-07-27

    In Hungary, the National Accreditation Body was established by government in 1995 as an independent, non-profit organization, and has exclusive rights to accredit, amongst others, medical laboratories. The National Accreditation Body has two Specialist Advisory Committees in the health care sector. One is the Health Care Specialist Advisory Committee that accredits certifying bodies, which deal with certification of hospitals. The other Specialist Advisory Committee for Medical Laboratories is directly involved in accrediting medical laboratory services of health care institutions. The Specialist Advisory Committee for Medical Laboratories is a multidisciplinary peer review group of experts from all disciplines of in vitro diagnostics, i.e. laboratory medicine, microbiology, histopathology and blood banking. At present, the only published International Standard applicable to laboratories is ISO/IEC 17025:1999. Work has been in progress on the official approval of the new ISO 15189 standard, specific to medical laboratories. Until the official approval of the International Standard ISO 15189, as accreditation standard, the Hungarian National Accreditation Body has decided to progress with accreditation by formulating explanatory notes to the ISO/IEC 17025:1999 document, using ISO/FDIS 15189:2000, the European EC4 criteria and CPA (UK) Ltd accreditation standards as guidelines. This harmonized guideline provides 'explanations' that facilitate the application of ISO/IEC 17025:1999 to medical laboratories, and can be used as a checklist for the verification of compliance during the onsite assessment of the laboratory. The harmonized guideline adapted the process model of ISO 9001:2000 to rearrange the main clauses of ISO/IEC 17025:1999. This rearrangement does not only make the guideline compliant with ISO 9001:2000 but also improves understanding for those working in medical laboratories, and facilitates the training and education of laboratory staff. With the

  17. The Gran Sasso Laboratory

    NASA Astrophysics Data System (ADS)

    Votano, L.

    2012-09-01

    The Gran Sasso underground laboratory is one of the four national laboratories run by the INFN (Istituto Nazionale di Fisica Nucleare). It is located under the Gran Sasso massif, in central Italy, between the cities of L'Aquila and Teramo, 120 km far from Rome. It is the largest underground laboratory for astroparticle physics in the world and the most advanced in terms of complexity and completeness of its infrastructures. The scientific program at the Gran Sasso National Laboratories (Laboratori Nazionali del Gran Sasso, LNGS)is mainly focused on astroparticle, particle and nuclear physics. The laboratory presently hosts many experiments as well as R&D activities, including world-leading research in the fields of solar neutrinos, accelerator neutrinos (CNGS neutrino beam from CERN to Gran Sasso), dark matter, neutrinoless double-beta decay and nuclear cross-section of astrophysical interest. Associate sciences like earth physics, biology and fundamental physics complement the activities. The laboratory is operated as an international science facility and hosts experiments whose scientific merit is assessed by an international advisory Scientific Committee. A review of the main experiments carried out at LNGS will be given, together with the most recent and relevant scientific results achieved.

  18. Carbon Characterization Laboratory Report

    SciTech Connect

    David Swank; William Windes; D.C. Haggard; David Rohrbaugh; Karen Moore

    2009-03-01

    The newly completed Idaho National Laboratory (INL) Carbon Characterization Laboratory (CCL) is located in Lab-C20 of the Idaho National Laboratory Research Center. This laboratory was established under the Next Generation Nuclear Plant (NGNP) Project to support graphite research and development activities. The CCL is designed to characterize and test carbon-based materials such as graphite, carbon-carbon composites, and silicon-carbide composite materials. The laboratory is fully prepared to measure material properties for nonirradiated carbon-based materials. Plans to establish the laboratory as a radiological facility within the next year are definitive. This laboratory will be modified to accommodate irradiated materials, after which it can be used to perform material property measurements on both irradiated and nonirradiated carbon-based material. Instruments, fixtures, and methods are in place for preirradiation measurements of bulk density, thermal diffusivity, coefficient of thermal expansion, elastic modulus, Young’s modulus, Shear modulus, Poisson ratio, and electrical resistivity. The measurement protocol consists of functional validation, calibration, and automated data acquisition.

  19. Laboratory Automation and Middleware.

    PubMed

    Riben, Michael

    2015-06-01

    The practice of surgical pathology is under constant pressure to deliver the highest quality of service, reduce errors, increase throughput, and decrease turnaround time while at the same time dealing with an aging workforce, increasing financial constraints, and economic uncertainty. Although not able to implement total laboratory automation, great progress continues to be made in workstation automation in all areas of the pathology laboratory. This report highlights the benefits and challenges of pathology automation, reviews middleware and its use to facilitate automation, and reviews the progress so far in the anatomic pathology laboratory.

  20. Sonication standard laboratory module

    DOEpatents

    Beugelsdijk, Tony; Hollen, Robert M.; Erkkila, Tracy H.; Bronisz, Lawrence E.; Roybal, Jeffrey E.; Clark, Michael Leon

    1999-01-01

    A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

  1. Laboratory Accreditation in Argentina

    PubMed Central

    Collino, Cesar; Chiabrando, Gustavo A.

    2015-01-01

    Laboratory accreditation is an essential element in the healthcare system since it contributes substantially to decision-making, in the prevention, diagnosis, treatment and follow-up of the health status of the patients, as well as in the organization and management of public healthcare. Therefore, the clinical biochemistry professional works continuously to provide reliable results and contributes to the optimization of operational logistics and integration of a laboratory into the health system. ISO 15189 accreditation, ensures compliance of the laboratory to minimize instances of error through the planning, prevention, implementation, evaluation and improvement of its procedures, which provides skill areas that involve both training undergraduate and graduate professionals in clinical biochemistry.

  2. RAS Laboratory Groups

    Cancer.gov

    The RAS Initiative uses multiple technologies to attack RAS-driven cancers. The resources of the Frederick National Lab allocated to the RAS Hub are organized into seven laboratory groups, each contributing to the collaborative effort.

  3. Safety in Science Laboratories.

    ERIC Educational Resources Information Center

    Education in Science, 1978

    1978-01-01

    Presents 12 amendments to the second edition of Safety in Science Laboratories. Covers topics such as regular inspection of equipment, wearing safety glasses, dating stock chemicals, and safe use of chemicals. (MA)

  4. Ecosystems in the Laboratory

    ERIC Educational Resources Information Center

    Madders, M.

    1975-01-01

    Describes the materials and laboratory techniques for the study of food chains and food webs, pyramids of numbers and biomass, energy pyramids, and oxygen gradients. Presents a procedure for investigating the effects of various pollutants on an entire ecosystem. (GS)

  5. Organic Laboratory Experiments.

    ERIC Educational Resources Information Center

    Smith, Sherrel

    1990-01-01

    Detailed is a method in which short pieces of teflon tubing may be used for collection tubes for collecting preparative fractions from gas chromatographs. Material preparation, laboratory procedures, and results of this method are discussed. (CW)

  6. Understanding Laboratory Tests

    MedlinePlus

    ... and Drug Administration (FDA) regulates the development and marketing of all laboratory tests that use test kits ... at the National Institutes of Health FOLLOW US Facebook Twitter Instagram YouTube Google+ LinkedIn GovDelivery RSS CONTACT ...

  7. NETL - Thermogravimetric Analysis Laboratory

    SciTech Connect

    Richards, George

    2013-06-12

    Researchers in NETL's Thermal Analysis Laboratory are investigating chemical looping combustion. As a clean and efficient fossil fuel technology, chemical looping combustion controls CO2 emissions and offers a promising alternative to traditional combustion.

  8. Tethered gravity laboratories study

    NASA Technical Reports Server (NTRS)

    Lucchetti, F.

    1989-01-01

    Variable Gravity Laboratory studies are discussed. The following subject areas are covered: (1) conceptual design and engineering analysis; (2) control strategies (fast crawling maneuvers, main perturbations and their effect upon the acceleration level); and (3) technology requirements.

  9. The Microscale Laboratory.

    ERIC Educational Resources Information Center

    Zipp, Arden P., Ed.

    1990-01-01

    Described are two microscale chemistry laboratory experiments including "Microscale Syntheses of Heterocyclic Compounds," and "Microscale Acid-Base Extraction--A Colorful Introduction." Materials, procedures and probable results are discussed. (CW)

  10. Physics Laboratory in UEC

    NASA Astrophysics Data System (ADS)

    Takada, Tohru; Nakamura, Jin; Suzuki, Masaru

    All the first-year students in the University of Electro-Communications (UEC) take "Basic Physics I", "Basic Physics II" and "Physics Laboratory" as required subjects; Basic Physics I and Basic Physics II are calculus-based physics of mechanics, wave and oscillation, thermal physics and electromagnetics. Physics Laboratory is designed mainly aiming at learning the skill of basic experimental technique and technical writing. Although 95% students have taken physics in the senior high school, they poorly understand it by connecting with experience, and it is difficult to learn Physics Laboratory in the university. For this reason, we introduced two ICT (Information and Communication Technology) systems of Physics Laboratory to support students'learning and staff's teaching. By using quantitative data obtained from the ICT systems, we can easily check understanding of physics contents in students, and can improve physics education.

  11. Tethered gravity laboratories study

    NASA Technical Reports Server (NTRS)

    Lucchetti, F.

    1989-01-01

    The following subject areas are covered: (1) thermal control issues; (2) attitude control sybsystem; (3) configuration constraints; (4) payload; (5) acceleration requirements on Variable Gravity Laboratory (VGL); and (6) VGL configuration highlights.

  12. Retainer for laboratory animals

    NASA Technical Reports Server (NTRS)

    Lee, R. W.

    1979-01-01

    Bio-retainer holds laboratory animals in fixed position for research and clinical experiments. Retainer allows full access to animals and can be rapidly opened and closed to admit and release specimens.

  13. Theory and laboratory astrophysics

    NASA Technical Reports Server (NTRS)

    Schramm, David N.; Mckee, Christopher F.; Alcock, Charles; Allamandola, Lou; Chevalier, Roger A.; Cline, David B.; Dalgarno, Alexander; Elmegreen, Bruce G.; Fall, S. Michael; Ferland, Gary J.

    1991-01-01

    Science opportunities in the 1990's are discussed. Topics covered include the large scale structure of the universe, galaxies, stars, star formation and the interstellar medium, high energy astrophysics, and the solar system. Laboratory astrophysics in the 1990's is briefly surveyed, covering such topics as molecular, atomic, optical, nuclear and optical physics. Funding recommendations are given for the National Science Foundation, NASA, and the Department of Energy. Recommendations for laboratory astrophysics research are given.

  14. Passive treatment of acid mine drainage in systems containing compost and limestone: Laboratory and field results

    SciTech Connect

    Watzlaf, G.R.; Pappas, D.M.

    1996-12-31

    Passive, down-flow systems, consisting of compost and limestone layers, termed successive alkalinity producing systems (SAPS), may be well suited for treatment of mine drainage containing ferric iron and/or aluminum. A column, simulating a SAPS, has been operated in the laboratory for 52 weeks. The 0.16-m diameter column consisted of a 0.30-m thick layer of limestone, a 0.76-m thick layer of spent mushroom compost thick layer of limestone, a 0.76-m thick layer of spent mushroom compost and 0.91 m of free standing water. Actual AMD (pH = 3.02, acidity = 218 mg/L (as CaCO{sub 3}), SO{sub 4} = 600 mg/L, Fe = 16.0 mg/L, Mn = 12.1 mg/L, and Al = 17.1 mg/L) was applied to the column at a rate of 3.8 mL/min. Effluent pH has remained above 6.2 (6.2-7.9) in the column system. A SAPS located in Jefferson County, PA has been monitored for the past 4.5 years. The SAPS has an approximate area of 1000 m{sup 2} and contains a 0.4-m thick layer of limestone, a 0.2-m thick layer of spent mushroom compost, and 1.5 m of free standing water. Mine water (acidity = 335 mg/L (as CaCO{sub 3}), SO{sub 4} = 1270 mg/L, Fe = 246 mg/L, Mn = 38.4 mg/L, and Al = <0.2 mg/L) flowed into the SAPS at a rate of 140 L/min. Water samples from the field and laboratory systems have been collected at strategic locations on a regular basis and analyzed for pH, alkalinity, acidity, Fe{sup 2+}, total Fe, Mn, Al, SO{sub 4}, Ca, Mg, Na, Co, Ni, and Zn. Alkalinity has been generated in both field and laboratory systems by a combination of limestone dissolution and sulfate reduction. The column generated an average of 378 mg/L of alkalinity; 74% due to limestone dissolution and 26% due to bacterial reduction of sulfate. The field SAPS generated an average of 231 mg/L of alkalinity and exhibited seasonal trends.

  15. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - GEOCHEMISTRY LABORATORY AT SANDIA NATIONAL LABORATORIES

    EPA Science Inventory

    These reports summarize pollution prevention opportunity assessments conducted jointly by EPA and DOE at the Geochemistry Laboratory and the Manufacturing and Fabrication Repair Laboratory at the Department of Energy's Sandia National Laboratories facility in Albuquerque, New Mex...

  16. [Laboratory medicine in Taiwan].

    PubMed

    Chen, J S

    1998-07-01

    Laboratory medicine and hospital central laboratory system were adopted in Taiwan after World War II. In medical schools, laboratory medicine or clinical pathology teaching is allocated to junior students. Three years of clinical pathology or four years of anatomical pathology training is required for pathology resident. Recent trend indicates that both the hospitals and the young doctors favor the five years combined C.P. (two-years) and A.P. (three years) training program. At present, 75 clinical pathologists and 213 anatomical pathologists are qualified. Approximately 70% of them work in medical centers and medical schools. Consequently, the medium and small size hospitals suffer from serious shortage of pathologist. Studies during the part 50 years indicate substantial difference in the improvement of laboratory medicine and central laboratory before and after 1975. Significant improvement in the working space, facility, equipment, staff, quality control and productivity was evident after 1975. The three health care policies contributing to the overall improvement are: 1. hospital accreditation project, 2. medical care network plan, and 3. medical specialist system.

  17. Laboratory safety handbook

    USGS Publications Warehouse

    Skinner, E.L.; Watterson, C.A.; Chemerys, J.C.

    1983-01-01

    Safety, defined as 'freedom from danger, risk, or injury,' is difficult to achieve in a laboratory environment. Inherent dangers, associated with water analysis and research laboratories where hazardous samples, materials, and equipment are used, must be minimized to protect workers, buildings, and equipment. Managers, supervisors, analysts, and laboratory support personnel each have specific responsibilities to reduce hazards by maintaining a safe work environment. General rules of conduct and safety practices that involve personal protection, laboratory practices, chemical handling, compressed gases handling, use of equipment, and overall security must be practiced by everyone at all levels. Routine and extensive inspections of all laboratories must be made regularly by qualified people. Personnel should be trained thoroughly and repetitively. Special hazards that may involve exposure to carcinogens, cryogenics, or radiation must be given special attention, and specific rules and operational procedures must be established to deal with them. Safety data, reference materials, and texts must be kept available if prudent safety is to be practiced and accidents prevented or minimized.

  18. [Laboratory animal; allergy; asthma].

    PubMed

    Corradi, M; Romano, C; Mutti, A

    2011-01-01

    Laboratory animal allergy (LAA) may develop when susceptible persons are exposed to allergens produced by laboratory animals. LAA is associated with exposure to urine, fur, and salivae of rats, guinea pigs, dogs and rabbits. Approximately 30% of persons who are exposed to laboratory animals may develop LAA and some will also develop asthma. LAA is most likely to occur in persons with previously known allergies, especially to domestic pets. The majority of LAA sufferers experience symptoms within six months their first exposure to laboratory animals; almost all develop symptoms within three years. The most common symptoms are watery eyes and an itchy, runny nose, although skin symptoms and lower respiratory tract symptoms may also occur. Feeding and handling laboratory animals or cleaning their cages generates ten times the amount of allergens compared with undisturbed conditions. Prevention of animal allergy depends on control of allergenic material in the work environment and on organizational and individual protection measures. Pre-placement evaluation and periodic medical surveillance of workers are important pieces of the overall occupational health programme. The emphasis of these medical evaluations should be on counselling and early disease detection.

  19. Space Food Systems Laboratory

    NASA Technical Reports Server (NTRS)

    Perchonok, Michele; Russo, Dane M. (Technical Monitor)

    2001-01-01

    The Space Food Systems Laboratory (SFSL) is a multipurpose laboratory responsible for space food and package research and development. It is located on-site at Johnson Space Center in Building 17. The facility supports the development of flight food, menus, packaging and food related hardware for Shuttle, International Space Station, and Advanced Life Support food systems. All foods used to support NASA ground tests and/or missions must meet the highest standards before they are 'accepted' for use on actual space flights. The foods are evaluated for nutritional content, sensory acceptability, safety, storage and shelf life, and suitability for use in micro-gravity. The food packaging is also tested to determine its functionality and suitability for use in space. Food Scientist, Registered Dieticians, Packaging Engineers, Food Systems Engineers, and Technicians staff the Space Food Systems Laboratory.

  20. Laboratory Accreditation in Argentina.

    PubMed

    Acuña, María Amelia; Collino, Cesar; Chiabrando, Gustavo A

    2015-11-01

    Laboratory accreditation is an essential element in the healthcare system since it contributes substantially to decision-making, in the prevention, diagnosis, treatment and follow-up of the health status of the patients, as well as in the organization and management of public healthcare. Therefore, the clinical biochemistry professional works continuously to provide reliable results and contributes to the optimization of operational logistics and integration of a laboratory into the health system. ISO 15189 accreditation, ensures compliance of the laboratory to minimize instances of error through the planning, prevention, implementation, evaluation and improvement of its procedures, which provides skill areas that involve both training undergraduate and graduate professionals in clinical biochemistry. PMID:27683497

  1. Laboratory Accreditation in Argentina

    PubMed Central

    Collino, Cesar; Chiabrando, Gustavo A.

    2015-01-01

    Laboratory accreditation is an essential element in the healthcare system since it contributes substantially to decision-making, in the prevention, diagnosis, treatment and follow-up of the health status of the patients, as well as in the organization and management of public healthcare. Therefore, the clinical biochemistry professional works continuously to provide reliable results and contributes to the optimization of operational logistics and integration of a laboratory into the health system. ISO 15189 accreditation, ensures compliance of the laboratory to minimize instances of error through the planning, prevention, implementation, evaluation and improvement of its procedures, which provides skill areas that involve both training undergraduate and graduate professionals in clinical biochemistry. PMID:27683497

  2. Evaluating Astronomy Laboratories

    NASA Astrophysics Data System (ADS)

    Zirbel, E. L.

    2002-12-01

    A set of non-traditional astronomy laboratories for non-science majors will be presented along with evaluations of lab technicians (these labs were originally developed at the College of Staten Island of the City University of New York). The goal of these labs is twofold: (a) to provide the students with hands-on experiences of scientific methodology and (b) to provoke critical thinking. Because non-science majors are often rather resistant to learning the relevant methodology - and especially to thinking critically - this manual is structured differently. It does not only provide traditional cook-book recipes but also contains several leading questions to make the students realize why they are doing what. The students are encouraged to write full sentences and explain how they reach which conclusions. This poster summarizes the experiences of the laboratory assistants that worked with the instructor and presents how they judge the effectiveness of the laboratories.

  3. Analytical laboratory quality audits

    SciTech Connect

    Kelley, William D.

    2001-06-11

    Analytical Laboratory Quality Audits are designed to improve laboratory performance. The success of the audit, as for many activities, is based on adequate preparation, precise performance, well documented and insightful reporting, and productive follow-up. Adequate preparation starts with definition of the purpose, scope, and authority for the audit and the primary standards against which the laboratory quality program will be tested. The scope and technical processes involved lead to determining the needed audit team resources. Contact is made with the auditee and a formal audit plan is developed, approved and sent to the auditee laboratory management. Review of the auditee's quality manual, key procedures and historical information during preparation leads to better checklist development and more efficient and effective use of the limited time for data gathering during the audit itself. The audit begins with the opening meeting that sets the stage for the interactions between the audit team and the laboratory staff. Arrangements are worked out for the necessary interviews and examination of processes and records. The information developed during the audit is recorded on the checklists. Laboratory management is kept informed of issues during the audit so there are no surprises at the closing meeting. The audit report documents whether the management control systems are effective. In addition to findings of nonconformance, positive reinforcement of exemplary practices provides balance and fairness. Audit closure begins with receipt and evaluation of proposed corrective actions from the nonconformances identified in the audit report. After corrective actions are accepted, their implementation is verified. Upon closure of the corrective actions, the audit is officially closed.

  4. Consolidated clinical microbiology laboratories.

    PubMed

    Sautter, Robert L; Thomson, Richard B

    2015-05-01

    The manner in which medical care is reimbursed in the United States has resulted in significant consolidation in the U.S. health care system. One of the consequences of this has been the development of centralized clinical microbiology laboratories that provide services to patients receiving care in multiple off-site, often remote, locations. Microbiology specimens are unique among clinical specimens in that optimal analysis may require the maintenance of viable organisms. Centralized laboratories may be located hours from patient care settings, and transport conditions need to be such that organism viability can be maintained under a variety of transport conditions. Further, since the provision of rapid results has been shown to enhance patient care, effective and timely means for generating and then reporting the results of clinical microbiology analyses must be in place. In addition, today, increasing numbers of patients are found to have infection caused by pathogens that were either very uncommon in the past or even completely unrecognized. As a result, infectious disease specialists, in particular, are more dependent than ever on access to high-quality diagnostic information from clinical microbiology laboratories. In this point-counterpoint discussion, Robert Sautter, who directs a Charlotte, NC, clinical microbiology laboratory that provides services for a 40-hospital system spread over 3 states in the southeastern United States explains how an integrated clinical microbiology laboratory service has been established in a multihospital system. Richard (Tom) Thomson of the NorthShore University HealthSystem in Evanston, IL, discusses some of the problems and pitfalls associated with large-scale laboratory consolidation.

  5. Underground laboratories in Asia

    SciTech Connect

    Lin, Shin Ted; Yue, Qian

    2015-08-17

    Deep underground laboratories in Asia have been making huge progress recently because underground sites provide unique opportunities to explore the rare-event phenomena for the study of dark matter searches, neutrino physics and nuclear astrophysics as well as the multi-disciplinary researches based on the low radioactive environments. The status and perspectives of Kamioda underground observatories in Japan, the existing Y2L and the planned CUP in Korea, India-based Neutrino Observatory (INO) in India and China JinPing Underground Laboratory (CJPL) in China will be surveyed.

  6. National Media Laboratory

    NASA Technical Reports Server (NTRS)

    Clark, Robert

    1992-01-01

    A review of the National Media Laboratory (NML) is presented. The mission of the NML is to support current government user data storage needs and assist them in getting the most efficient 'commercial' solutions in the future. The motivation for a National Media Laboratory is as follows: recording systems are the major government image and data exploitation bottleneck; government data recording performance and storage requirements lead commercial practice by 3-5 years; the supporting commercial recorder industry is large but principally focused on video not data formats; lack of standards; and lack of transfer of commercial knowledge base to program offices and operational sites.

  7. USGS Scientific Visualization Laboratory

    USGS Publications Warehouse

    ,

    1995-01-01

    The U.S. Geological Survey's (USGS) Scientific Visualization Laboratory at the National Center in Reston, Va., provides a central facility where USGS employees can use state-of-the-art equipment for projects ranging from presentation graphics preparation to complex visual representations of scientific data. Equipment including color printers, black-and-white and color scanners, film recorders, video equipment, and DOS, Apple Macintosh, and UNIX platforms with software are available for both technical and nontechnical users. The laboratory staff provides assistance and demonstrations in the use of the hardware and software products.

  8. Note On The Ross Sea Shelf Water Downflow Processes (antarctica)

    NASA Astrophysics Data System (ADS)

    Bergamasco, A.; Defendi, V.; Spezie, G.; Budillon, G.; Carniel, S.

    In the framework of the CLIMA Project of the Italian National Program for Research in Antarctica, three different experimental data sets were acquired along the continental shelf break; two of them (in 1997 and 2001) close to Cape Adare, the 1998 one in the middle of the Ross Sea (i.e. 75 S, 177 W). The investigations were chosen in order to explore the downslope flow of the bottom waters produced in the Ross Sea, namely the High Salinity Shelf Water (HSSW, the densest water mass of the southern ocean coming from its formation site in the polynya region in Terra Nova bay), and the Ice Shelf Water (ISW, originated below the Ross Ice Shelf and outflowing northward). Both bottom waters spill over the shelf edge and mix with the Circumpolar Deep Water (CDW) contributing to the formation of the Antarctic Bottom Waters (AABW). Interpreting temperature, salinity and density maps in terms of cascading processes, both HSSW and ISW overflows are evidenced during, respectively, 1997 and 1998. During the 2001 acquisition there is no presence of HSSW along the shelf break, nevertheless distribution captures the evidence of a downslope flow process.

  9. Combination downflow-upflow vapor-liquid separator

    DOEpatents

    Kidwell, John H.; Prueter, William P.; Eaton, Andrew M.

    1987-03-10

    An improved vapor-liquid separator having a vertically disposed conduit for flow of a mixture. A first, second and third plurality of curved arms penetrate and extend within the conduit. A cylindrical member is radially spaced from the conduit forming an annulus therewith and having perforations and a retaining lip at its upper end.

  10. Introductory Materials Laboratory.

    ERIC Educational Resources Information Center

    Ritter, John E., Jr.

    Described is an introductory materials science laboratory program which emphasizes crystal structure both on the atomistic and microscopic scale and the dependence of materials properties on structure. The content of this program is classified into four major areas: (1) materials science, (2) mechanical behavior of materials, (3) materials testing…

  11. Introducing Laboratory Safety.

    ERIC Educational Resources Information Center

    DeLorenzo, Ronald

    1985-01-01

    Presents a simple, 10-item quiz designed to make students aware that they must learn laboratory safety. The items include questions on acid/base accidents, several types of fire extinguishers, and safety glassses. Answers and some explanations are included. (DH)

  12. Microcomputers in the Laboratory.

    ERIC Educational Resources Information Center

    Rafert, Bruce; Nicklin, R. C.

    1982-01-01

    A one-semester hour laboratory course introduced junior and senior physics majors to assembly language programing and to interfacing KIM-1 microcomputer to experiments. A general purpose interface to a standard breadboard was developed. Course details, apparatus, and some interfacing projects are given. (Author/SK)

  13. Laboratory investigation of hypercoagulability.

    PubMed

    Francis, J L

    1998-01-01

    For many years, the laboratory investigation of patients with thrombophilia has lagged behind that of patients with bleeding diathesis. Improved understanding of the mechanisms that control and regulate coagulation, and the resultant recognition of new defects, have greatly stimulated clinical laboratory interest in this area. Assays to detect resistance to activated protein C; deficiencies of antithrombin, protein C, and protein S; and the presence of antiphospholipid antibodies are widely available and should form part of the investigation of patients that present with idiopathic thrombosis. Such a work-up will likely provide an explanation for thrombosis in 40 to 60% of patients. Abnormalities of fibrinogen and fibrinolysis may explain still more, although such defects are currently considered rare. In addition, presently unrecognized defects almost certainly exist, and the identification of such individuals will undoubtedly improve our understanding of the hemostatic mechanism. Laboratory tests to define the hypercoagulable state are continually being developed. They include whole blood coagulation and platelet function tests and novel activation markers. However, acceptance of these approaches by clinical laboratories has been slow.

  14. Simulating Laboratory Procedures.

    ERIC Educational Resources Information Center

    Baker, J. E.; And Others

    1986-01-01

    Describes the use of computer assisted instruction in a medical microbiology course. Presents examples of how computer assisted instruction can present case histories in which the laboratory procedures are simulated. Discusses an authoring system used to prepare computer simulations and provides one example of a case history dealing with fractured…

  15. RUNNING A LANGUAGE LABORATORY.

    ERIC Educational Resources Information Center

    REES, ALUN L.W.

    THIS ARTICLE DESCRIBES THE LANGUAGE LABORATORY AT THE NATIONAL UNIVERSITY OF TRUJILLO AS IT IS USED IN THE FIVE-YEAR ENGLISH TEACHER TRAINING PROGRAM. THE FIRST TWO YEARS OF THIS COURSE ARE INTENSIVE, BASED ON A STUDY OF ENGLISH USING LADO-FRIES MATERIALS (FOR LATIN AMERICAN LEARNERS) WHICH REQUIRE FIVE HOURS OF CLASSWORK A WEEK SUPPLEMENTED BY…

  16. Laboratory analysis of stardust.

    PubMed

    Zinner, Ernst

    2013-02-01

    Tiny dust grains extracted from primitive meteorites are identified to have originated in the atmospheres of stars on the basis of their anomalous isotopic compositions. Although isotopic analysis with the ion microprobe plays a major role in the laboratory analysis of these stardust grains, many other microanalytical techniques are applied to extract the maximum amount of information.

  17. Aquatic Microbiology Laboratory Manual.

    ERIC Educational Resources Information Center

    Cooper, Robert C.; And Others

    This laboratory manual presents information and techniques dealing with aquatic microbiology as it relates to environmental health science, sanitary engineering, and environmental microbiology. The contents are divided into three categories: (1) ecological and physiological considerations; (2) public health aspects; and (3)microbiology of water…

  18. Energy Systems Laboratory Groundbreaking

    ScienceCinema

    Hill, David; Otter, C.L.; Simpson, Mike; Rogers, J.W.

    2016-07-12

    INL recently broke ground for a research facility that will house research programs for bioenergy, advanced battery systems, and new hybrid energy systems that integrate renewable, fossil and nuclear energy sources. Here's video from the groundbreaking ceremony for INL's new Energy Systems Laboratory. You can learn more about CAES research at http://www.facebook.com/idahonationallaboratory.

  19. Instrumental Analysis Chemistry Laboratory

    ERIC Educational Resources Information Center

    Munoz de la Pena, Arsenio; Gonzalez-Gomez, David; Munoz de la Pena, David; Gomez-Estern, Fabio; Sequedo, Manuel Sanchez

    2013-01-01

    designed for automating the collection and assessment of laboratory exercises is presented. This Web-based system has been extensively used in engineering courses such as control systems, mechanics, and computer programming. Goodle GMS allows the students to submit their results to a…

  20. Computerized Cognition Laboratory.

    ERIC Educational Resources Information Center

    Motes, Michael A.; Wiegmann, Douglas A.

    1999-01-01

    Describes a software package entitled the "Computerized Cognition Laboratory" that helps integrate the teaching of cognitive psychology and research methods. Allows students to explore short-term memory, long-term memory, and decision making. Can also be used to teach the application of several statistical procedures. (DSK)

  1. Laboratory investigation of hypercoagulability.

    PubMed

    Francis, J L

    1998-01-01

    For many years, the laboratory investigation of patients with thrombophilia has lagged behind that of patients with bleeding diathesis. Improved understanding of the mechanisms that control and regulate coagulation, and the resultant recognition of new defects, have greatly stimulated clinical laboratory interest in this area. Assays to detect resistance to activated protein C; deficiencies of antithrombin, protein C, and protein S; and the presence of antiphospholipid antibodies are widely available and should form part of the investigation of patients that present with idiopathic thrombosis. Such a work-up will likely provide an explanation for thrombosis in 40 to 60% of patients. Abnormalities of fibrinogen and fibrinolysis may explain still more, although such defects are currently considered rare. In addition, presently unrecognized defects almost certainly exist, and the identification of such individuals will undoubtedly improve our understanding of the hemostatic mechanism. Laboratory tests to define the hypercoagulable state are continually being developed. They include whole blood coagulation and platelet function tests and novel activation markers. However, acceptance of these approaches by clinical laboratories has been slow. PMID:9579632

  2. Green Building Research Laboratory

    SciTech Connect

    Sailor, David Jean

    2013-12-29

    This project provided support to the Green Building Research Laboratory at Portland State University (PSU) so it could work with researchers and industry to solve technical problems for the benefit of the green building industry. It also helped to facilitate the development of PSU’s undergraduate and graduate-level training in building science across the curriculum.

  3. Microcomputers and Introductory Laboratories

    ERIC Educational Resources Information Center

    Rinard, Phillip M.; Calvert, James W.

    1973-01-01

    Describes the use of Marchant 1016PR with a magnetic tape reader, Monroe 1665 with a punchcard reader, and Hewlett-Packard 9820A with an X-Y plotter to conduct introductory physics laboratory programs. Indicates that the course allows more physics to be done in the same amount of time. (CC)

  4. Writing the Laboratory Notebook.

    ERIC Educational Resources Information Center

    Kanare, Howard M.

    The purpose of this book is to teach the principles of proper scientific notekeeping. The principles presented in this book are goals for which working scientists must strive. Chapter 1, "The Reasons for Notekeeping," is an overview of the process of keeping a laboratory notebook. Chapter 2, "The Hardware of Notekeeping," is intended especially…

  5. Water Chemistry Laboratory Manual.

    ERIC Educational Resources Information Center

    Jenkins, David; And Others

    This manual of laboratory experiments in water chemistry serves a dual function of illustrating fundamental chemical principles of dilute aqueous systems and of providing the student with some familiarity with the chemical measurements commonly used in water and wastewater analysis. Experiments are grouped in categories on the basis of similar…

  6. Energy Systems Laboratory Groundbreaking

    SciTech Connect

    Hill, David; Otter, C.L.; Simpson, Mike; Rogers, J.W.

    2011-01-01

    INL recently broke ground for a research facility that will house research programs for bioenergy, advanced battery systems, and new hybrid energy systems that integrate renewable, fossil and nuclear energy sources. Here's video from the groundbreaking ceremony for INL's new Energy Systems Laboratory. You can learn more about CAES research at http://www.facebook.com/idahonationallaboratory.

  7. Microgravity Materials Science Laboratory

    NASA Technical Reports Server (NTRS)

    Grisaffe, S. J.

    1985-01-01

    A Microgravity Materials Science Laboratory (MMSL) has been planned, designed, and is being developed. This laboratory will support related efforts to define the requirements for the Microgravity and Materials Processing Laboratory (MMPF) and the MMPF Test Bed for the Space Station. The MMSL will serve as a check out and training facility for science mission specialists for STS, Spacelab and Space Station prior to the full operation of the MMPF Test Bed. The focus of the MMSL will be on experiments related to the understanding of metal/ceramic/glass solidification, high perfection crystal growth and fluid physics. This ground-based laboratory will be used by university/industry/government researchers to examine and become familiar with the potential of new microgravity materials science concepts and to conduct longer term studies aimed at fully developing a l-g understanding of materials and processing phenomena. Such research will help create new high quality concepts for space experiments and will provide the basis for modeling, theories, and hypotheses upon which key space experiments can be defined and developed.

  8. Revitalizing chemistry laboratory instruction

    NASA Astrophysics Data System (ADS)

    McBride, Phil Blake

    This dissertation involves research in three major domains of chemical education as partial fulfillment of the requirements for the Ph.D. program in chemistry at Miami University with a major emphasis on chemical education, and concurrent study in organic chemistry. Unit I, Development and Assessment of a Column Chromatography Laboratory Activity, addresses the domain of Instructional Materials Development and Testing. This unit outlines the process of developing a publishable laboratory activity, testing and revising that activity, and subsequently sharing that activity with the chemical education community. A laboratory activity focusing on the separation of methylene blue and sodium fluorescein was developed to demonstrate the effects of both the stationary and mobile phase in conducting a separation. Unit II, Bringing Industry to the Laboratory, addresses the domain of Curriculum Development and Testing. This unit outlines the development of the Chemistry of Copper Mining module, which is intended for use in high school or undergraduate college chemistry. The module uses the learning cycle approach to present the chemistry of the industrial processes of mining copper to the students. The module includes thirteen investigations (three of which are web-based and ten which are laboratory experiments) and an accompanying interactive CD-ROM, which provides an explanation of the chemistry used in copper mining with a virtual tour of an operational copper mine. Unit III, An Alternative Method of Teaching Chemistry. Integrating Lecture and the Laboratory, is a project that addresses the domain of Research in Student Learning. Fundamental Chemistry was taught at Eastern Arizona College as an integrated lecture/laboratory course that met in two-hour blocks on Monday, Wednesday, and Friday. The students taking this integrated course were compared with students taking the traditional 1-hour lectures held on Monday, Wednesday, and Friday, with accompanying 3-hour lab on

  9. Laboratory Waste Management. A Guidebook.

    ERIC Educational Resources Information Center

    American Chemical Society, Washington, DC.

    A primary goal of the American Chemical Society Task Force on Laboratory Waste Management is to provide laboratories with the information necessary to develop effective strategies and training programs for managing laboratory wastes. This book is intended to present a fresh look at waste management from the laboratory perspective, considering both…

  10. Smart Grid Integration Laboratory

    SciTech Connect

    Troxell, Wade

    2011-12-22

    The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSU's overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratory's focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3) Simulation of

  11. Procedures of Exercise Physiology Laboratories

    NASA Technical Reports Server (NTRS)

    Bishop, Phillip A.; Fortney, Suzanne; Greenisen, Michael; Siconolfi, Steven F.; Bamman, Marcas M.; Moore, Alan D., Jr.; Squires, William

    1998-01-01

    This manual describes the laboratory methods used to collect flight crew physiological performance data at the Johnson Space Center. The Exercise Countermeasures Project Laboratory is a standard physiology laboratory; only the application to the study of human physiological adaptations to spaceflight is unique. In the absence of any other recently published laboratory manual, this manual should be a useful document staffs and students of other laboratories.

  12. The Indiana laboratory system: focus on environmental laboratories.

    PubMed

    Madlem, Jyl M; Hammes, Kara R; Matheson, Shelley R; Lovchik, Judith C

    2013-01-01

    The Indiana State Department of Health (ISDH) Laboratories are working to improve Indiana's state public health laboratory system. Environmental laboratories are key stakeholders in this system, but their needs have been largely unaddressed prior to this project. In an effort to identify and engage these laboratories, the ISDH Laboratories organized and hosted the First Annual Environmental Laboratories Meeting. The focus of this meeting was on water-testing laboratories throughout the state. Meeting objectives included issue identification, disaster recovery response, and communication efforts among system partners. Common concerns included the need for new technology and updated methods, analyst training, certification programs for analysts and sample collectors, electronic reporting, and regulation interpretation and inspection consistency. Now that these issues have been identified, they can be addressed through a combination of laboratory workgroups and collaboration with Indiana's regulatory agencies. Participants were overwhelmingly positive about the meeting's outcomes and were willing to help with future laboratory system improvement projects.

  13. The Indiana Laboratory System: Focus on Environmental Laboratories

    PubMed Central

    Hammes, Kara R.; Matheson, Shelley R.; Lovchik, Judith C.

    2013-01-01

    The Indiana State Department of Health (ISDH) Laboratories are working to improve Indiana's state public health laboratory system. Environmental laboratories are key stakeholders in this system, but their needs have been largely unaddressed prior to this project. In an effort to identify and engage these laboratories, the ISDH Laboratories organized and hosted the First Annual Environmental Laboratories Meeting. The focus of this meeting was on water-testing laboratories throughout the state. Meeting objectives included issue identification, disaster recovery response, and communication efforts among system partners. Common concerns included the need for new technology and updated methods, analyst training, certification programs for analysts and sample collectors, electronic reporting, and regulation interpretation and inspection consistency. Now that these issues have been identified, they can be addressed through a combination of laboratory workgroups and collaboration with Indiana's regulatory agencies. Participants were overwhelmingly positive about the meeting's outcomes and were willing to help with future laboratory system improvement projects. PMID:23997304

  14. Remote Sensing Laboratory - RSL

    SciTech Connect

    2014-11-06

    One of the primary resources supporting homeland security is the Remote Sensing Laboratory, or RSL. The Laboratory creates advanced technologies for emergency response operations, radiological incident response, and other remote sensing activities. RSL emergency response teams are on call 24-hours a day, and maintain the capability to deploy domestically and internationally in response to threats involving the loss, theft, or release of nuclear or radioactive material. Such incidents might include Nuclear Power Plant accidents, terrorist incidents involving nuclear or radiological materials, NASA launches, and transportation accidents involving nuclear materials. Working with the US Department of Homeland Security, RSL personnel equip, maintain, and conduct training on the mobile detection deployment unit, to provide nuclear radiological security at major national events such as the super bowl, the Indianapolis 500, New Year's Eve celebrations, presidential inaugurations, international meetings and conferences, just about any event where large numbers of people will gather.

  15. Remote Sensing Laboratory - RSL

    ScienceCinema

    None

    2016-07-12

    One of the primary resources supporting homeland security is the Remote Sensing Laboratory, or RSL. The Laboratory creates advanced technologies for emergency response operations, radiological incident response, and other remote sensing activities. RSL emergency response teams are on call 24-hours a day, and maintain the capability to deploy domestically and internationally in response to threats involving the loss, theft, or release of nuclear or radioactive material. Such incidents might include Nuclear Power Plant accidents, terrorist incidents involving nuclear or radiological materials, NASA launches, and transportation accidents involving nuclear materials. Working with the US Department of Homeland Security, RSL personnel equip, maintain, and conduct training on the mobile detection deployment unit, to provide nuclear radiological security at major national events such as the super bowl, the Indianapolis 500, New Year's Eve celebrations, presidential inaugurations, international meetings and conferences, just about any event where large numbers of people will gather.

  16. Space Radiation Effects Laboratory

    NASA Technical Reports Server (NTRS)

    1969-01-01

    The SREL User's Handbook is designed to provide information needed by those who plan experiments involving the accelerators at this laboratory. Thus the Handbook will contain information on the properties of the machines, the beam parameters, the facilities and services provided for experimenters, etc. This information will be brought up to date as new equipment is added and modifications accomplished. This Handbook is influenced by the many excellent models prepared at other accelerator laboratories. In particular, the CERN Synchrocyclotron User's Handbook (November 1967) is closely followed in some sections, since the SREL Synchrocyclotron is a duplicate of the CERN machine. We wish to thank Dr. E. G. Michaelis for permission to draw so heavily on his work, particularly in Section II of this Handbook. We hope that the Handbook will prove useful, and will welcome suggestions and criticism.

  17. Laboratory monitoring of haemostasis.

    PubMed

    Fowler, A; Perry, D J

    2015-01-01

    Peri-operative coagulation monitoring should begin with the assessment of individual bleeding risk using a standardised bleeding history before the surgical procedure. Laboratory testing should be performed if this history is abnormal or peri-operative bleeding is anticipated. This process sensitively identifies those at risk of peri-operative bleeding and therefore minimises their peri-operative risk, without costly and time-consuming population testing. There are multiple potential causes of haemostatic derangement within the peri-operative period, and an understanding of both normal haemostasis and the coagulation tests available to detect coagulopathy is required to optimise patient management. In bleeding patients, routine coagulation tests should be requested, but one should be aware of the major limitations that exist. Delay whilst waiting for these laboratory results, which, in turn, aggravates coagulopathy, bleeding, blood product requirements, length of surgery and overall morbidity and mortality.

  18. Princeton Plasma Physics Laboratory:

    SciTech Connect

    Phillips, C.A.

    1986-01-01

    This paper discusses progress on experiments at the Princeton Plasma Physics Laboratory. The projects and areas discussed are: Principal Parameters Achieved in Experimental Devices, Tokamak Fusion Test Reactor, Princeton Large Torus, Princeton Beta Experiment, S-1 Spheromak, Current-Drive Experiment, X-ray Laser Studies, Theoretical Division, Tokamak Modeling, Spacecraft Glow Experiment, Compact Ignition Tokamak, Engineering Department, Project Planning and Safety Office, Quality Assurance and Reliability, and Administrative Operations.

  19. The flight robotics laboratory

    NASA Technical Reports Server (NTRS)

    Tobbe, Patrick A.; Williamson, Marlin J.; Glaese, John R.

    1988-01-01

    The Flight Robotics Laboratory of the Marshall Space Flight Center is described in detail. This facility, containing an eight degree of freedom manipulator, precision air bearing floor, teleoperated motion base, reconfigurable operator's console, and VAX 11/750 computer system, provides simulation capability to study human/system interactions of remote systems. The facility hardware, software and subsequent integration of these components into a real time man-in-the-loop simulation for the evaluation of spacecraft contact proximity and dynamics are described.

  20. Portable Laser Laboratory

    SciTech Connect

    Weir, J.T.

    1994-07-01

    A Portable Laser Laboratory (PLL) is being designed and built for the CALIOPE Program tests which will begin in October of 1994. The PLL is designed to give maximum flexibility for evolving laser experiments and can be readily moved by loading it onto a standard truck trailer. The internal configuration for the October experiments will support a two line DIAL system running in the mid-IR. Brief descriptions of the laser and detection systems are included.

  1. Constructing laboratory courses

    NASA Astrophysics Data System (ADS)

    Carlson, Edward H.

    1986-11-01

    I present an orderly, top-down scheme for constructing laboratory courses. Start by choosing and defining an explicit set of goals. Take special care with such higher level goals as organizational skills, work habits, communication, and ``maturity.'' Then evaluate the needed degree of coverage of the various goals, pick methods of instruction, and design the units of the course so each goal receives the appropriate relative emphasis. In all stages, be guided by recent results in the field of cognitive science.

  2. Hanford cultural resources laboratory

    SciTech Connect

    Wright, M.K.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report describes activities of the Hanford Cultural Resources Laboratory (HCRL) which was established by the Richland Operations Office in 1987 as part of PNL.The HCRL provides support for the management of the archaeological, historical, and traditional cultural resources of the site in a manner consistent with the National Historic Preservation Act, the Native American Graves Protection and Repatriation Act, and the American Indian Religious Freedom Act.

  3. Cleanroom laboratory challenge overcome.

    PubMed

    Quinn, Ronan

    2010-10-01

    Ronan Quinn, managing director of interior construction specialist Ardmac, describes the challenges of building and fitting out a new cleanroom laboratory for blood and bone marrow therapeutic treatment at Our Lady's Children's Hospital Crumlin in Dublin. The "state-of-the-art" facility, which fully complies with the recent EU Directive concerning human tissues and cells, has been well received by the client and end-users alike, but, as he explains, there were many obstacles to overcome during its completion.

  4. Automated Microbial Metabolism Laboratory

    NASA Technical Reports Server (NTRS)

    1973-01-01

    Development of the automated microbial metabolism laboratory (AMML) concept is reported. The focus of effort of AMML was on the advanced labeled release experiment. Labeled substrates, inhibitors, and temperatures were investigated to establish a comparative biochemical profile. Profiles at three time intervals on soil and pure cultures of bacteria isolated from soil were prepared to establish a complete library. The development of a strategy for the return of a soil sample from Mars is also reported.

  5. Exploration Laboratory Analysis

    NASA Technical Reports Server (NTRS)

    Krihak, M.; Ronzano, K.; Shaw, T.

    2016-01-01

    The Exploration Laboratory Analysis (ELA) project supports the Exploration Medical Capability (ExMC) risk to minimize or reduce the risk of adverse health outcomes and decrements in performance due to in-flight medical capabilities on human exploration missions. To mitigate this risk, the availability of inflight laboratory analysis instrumentation has been identified as an essential capability for manned exploration missions. Since a single, compact space-ready laboratory analysis capability to perform all exploration clinical measurements is not commercially available, the ELA project objective is to demonstrate the feasibility of emerging operational and analytical capability as a biomedical diagnostics precursor to long duration manned exploration missions. The initial step towards ground and flight demonstrations in fiscal year (FY) 2015 was the down selection of platform technologies for demonstrations in the space environment. The technologies selected included two Small Business Innovation Research (SBIR) performers: DNA Medicine Institutes rHEALTH X and Intelligent Optical Systems later flow assays combined with Holomics smartphone analyzer. The selection of these technologies were based on their compact size, breadth of analytical capability and favorable ability to process fluids in a space environment, among several factors. These two technologies will be advanced to meet ground and flight demonstration success criteria and requirements that will be finalized in FY16. Also, the down selected performers will continue the technology development phase towards meeting prototype deliverables in either late 2016 or 2017.

  6. Laboratory Diagnosis of Amebiasis

    PubMed Central

    Tanyuksel, Mehmet; Petri, William A.

    2003-01-01

    The detection of Entamoeba histolytica, the causative agent of amebiasis, is an important goal of the clinical microbiology laboratory. To assess the scope of E. histolytica infection, it is necessary to utilize accurate diagnostic tools. As more is discovered about the molecular and cell biology of E. histolytica, there is great potential for further understanding the pathogenesis of amebiasis. Molecular biology-based diagnosis may become the technique of choice in the future because establishment of these protozoa in culture is still not a routine clinical laboratory process. In all cases, combination of serologic tests with detection of the parasite (by antigen detection or PCR) offers the best approach to diagnosis, while PCR techniques remain impractical in many developing country settings. The detection of amebic markers in serum in patients with amebic colitis and liver abscess appears promising but is still only a research tool. On the other hand, stool antigen detection tests offer a practical, sensitive, and specific way for the clinical laboratory to detect intestinal E. histolytica. All the current tests suffer from the fact that the antigens detected are denatured by fixation of the stool specimen, limiting testing to fresh or frozen samples. PMID:14557296

  7. Sandia National Laboratories

    SciTech Connect

    Not Available

    1991-01-01

    Sandia National Laboratories is a multiprogram engineering laboratory that serves the nation through the Department of Energy (DOE), both in its programs and those of other agencies. Major research and development responsibilities cover nuclear weapons, arms control, energy, environment and other areas of strategic importance to national security. The principal mission is to support national defense policies by ensuring that the nuclear weapon stockpile meets the highest standards of safety, security, control and military performance. In May of 1968, the Albuquerque Office of DOE (then AEC) assigned the Quality Assurance function to Sandia Laboratories on all products for which Sandia has design responsibility. The Sandia Quality Improvement Plan presents a Quality Management System that integrates the Sandia quality policies and several independent improvement processes into a cohesive structure. This structure guides day-to-day operations toward strategic objectives. The Sandia Quality Policy provides the underlying principles for the management of our research and engineering efforts and establishes our customers as the central focus of our Sandia quality improvement efforts. Operationally, these efforts are centered around quality improvement processes based on good management practices developed by AT T, and progress is measured against the Malcolm Baldridge National Quality Award criteria. Developing a comprehensive plan based on these processes requires that we determine where we are, where we want to be, and how we measure our progress. 1 fig. (JF)

  8. PHYSIOLAB: A cardiovascular laboratory

    NASA Astrophysics Data System (ADS)

    Cauquil, D.; Laffaye, C.; Camus, A. L.; Weerts, G.; Gratchev, V.; Alferova, I.; Kotovskaya, A.

    PHYSIOLAB is a cardio-vascular laboratory designed by CNES in cooperation with IMBP, with double scientific and medical goals: • a better understanding of the basic mechanisms involved in blood pressure and heart rate regulation, in order to predict and control the phenomenon of cardio-vascular deconditionning. • a real-time monitoring of cosmonauts during functionnal tests. Launched to the MIR station in 1996, this laboratory was set up and used for the first time by Claudie André-Deshays during the French mission ≪ Cassiopeia ≫. The scientific program is performed pre, post and in-flight to study phenomena related to the transition to microgravity as well as the return to the earth conditions. Particular emphasis was placed on the development of the real-time telemetry to monitor LBNP test. This function was successfull during the Cassiopeia mission, providing the medical team at TSOUP (MIR Control Center in Moscow) with efficient means to control the physiological state of the cosmonaut. Based on the results of this first mission, IMBP and CNES will go on using Physiolab with Russian crews. CNES will take advantage of the upcoming French missions on MIR to improve the system, and intends to develop a new laboratory for the International Space Station.

  9. High Resolution Laboratory Spectroscopy

    NASA Astrophysics Data System (ADS)

    Brünken, S.; Schlemmer, S.

    2016-05-01

    In this short review we will highlight some of the recent advancements in the field of high-resolution laboratory spectroscopy that meet the needs dictated by the advent of highly sensitive and broadband telescopes like ALMA and SOFIA. Among these is the development of broadband techniques for the study of complex organic molecules, like fast scanning conventional absorption spectroscopy based on multiplier chains, chirped pulse instrumentation, or the use of synchrotron facilities. Of similar importance is the extension of the accessible frequency range to THz frequencies, where many light hydrides have their ground state rotational transitions. Another key experimental challenge is the production of sufficiently high number densities of refractory and transient species in the laboratory, where discharges have proven to be efficient sources that can also be coupled to molecular jets. For ionic molecular species sensitive action spectroscopic schemes have recently been developed to overcome some of the limitations of conventional absorption spectroscopy. Throughout this review examples demonstrating the strong interplay between laboratory and observational studies will be given.

  10. Economic Education Laboratory: Initiating a Meaningful Economic Learning through Laboratory

    ERIC Educational Resources Information Center

    Noviani, Leny; Soetjipto, Budi Eko; Sabandi, Muhammad

    2015-01-01

    Laboratory is considered as one of the resources in supporting the learning process. The laboratory can be used as facilities to deepen the concepts, learning methods and enriching students' knowledge and skills. Learning process by utilizing the laboratory facilities can help lecturers and students in grasping the concept easily, constructing the…

  11. Purdue Hydrogen Systems Laboratory

    SciTech Connect

    Jay P Gore; Robert Kramer; Timothee L Pourpoint; P. V. Ramachandran; Arvind Varma; Yuan Zheng

    2011-12-28

    The Hydrogen Systems Laboratory in a unique partnership between Purdue University's main campus in West Lafayette and the Calumet campus was established and its capabilities were enhanced towards technology demonstrators. The laboratory engaged in basic research in hydrogen production and storage and initiated engineering systems research with performance goals established as per the USDOE Hydrogen, Fuel Cells, and Infrastructure Technologies Program. In the chemical storage and recycling part of the project, we worked towards maximum recycling yield via novel chemical selection and novel recycling pathways. With the basic potential of a large hydrogen yield from AB, we used it as an example chemical but have also discovered its limitations. Further, we discovered alternate storage chemicals that appear to have advantages over AB. We improved the slurry hydrolysis approach by using advanced slurry/solution mixing techniques. We demonstrated vehicle scale aqueous and non-aqueous slurry reactors to address various engineering issues in on-board chemical hydrogen storage systems. We measured the thermal properties of raw and spent AB. Further, we conducted experiments to determine reaction mechanisms and kinetics of hydrothermolysis in hydride-rich solutions and slurries. We also developed a continuous flow reactor and a laboratory scale fuel cell power generation system. The biological hydrogen production work summarized as Task 4.0 below, included investigating optimal hydrogen production cultures for different substrates, reducing the water content in the substrate, and integrating results from vacuum tube solar collector based pre and post processing tests into an enhanced energy system model. An automated testing device was used to finalize optimal hydrogen production conditions using statistical procedures. A 3 L commercial fermentor (New Brunswick, BioFlo 115) was used to finalize testing of larger samples and to consider issues related to scale up. Efforts

  12. Laboratory for Extraterrestrial Physics

    NASA Technical Reports Server (NTRS)

    Vondrak, Richard R. (Technical Monitor)

    2001-01-01

    The NASA Goddard Space Flight Center (GSFC) Laboratory for Extraterrestrial Physics (LEP) performs experimental and theoretical research on the heliosphere, the interstellar medium, and the magnetospheres and upper atmospheres of the planets, including Earth. LEP space scientists investigate the structure and dynamics of the magnetospheres of the planets including Earth. Their research programs encompass the magnetic fields intrinsic to many planetary bodies as well as their charged-particle environments and plasma-wave emissions. The LEP also conducts research into the nature of planetary ionospheres and their coupling to both the upper atmospheres and their magnetospheres. Finally, the LEP carries out a broad-based research program in heliospheric physics covering the origins of the solar wind, its propagation outward through the solar system all the way to its termination where it encounters the local interstellar medium. Special emphasis is placed on the study of solar coronal mass ejections (CME's), shock waves, and the structure and properties of the fast and slow solar wind. LEP planetary scientists study the chemistry and physics of planetary stratospheres and tropospheres and of solar system bodies including meteorites, asteroids, comets, and planets. The LEP conducts a focused program in astronomy, particularly in the infrared and in short as well as very long radio wavelengths. We also perform an extensive program of laboratory research, including spectroscopy and physical chemistry related to astronomical objects. The Laboratory proposes, develops, fabricates, and integrates experiments on Earth-orbiting, planetary, and heliospheric spacecraft to measure the characteristics of planetary atmospheres and magnetic fields, and electromagnetic fields and plasmas in space. We design and develop spectrometric instrumentation for continuum and spectral line observations in the x-ray, gamma-ray, infrared, and radio regimes; these are flown on spacecraft to study

  13. Laboratory and Industrial Ventilation

    NASA Technical Reports Server (NTRS)

    1972-01-01

    This handbook supplements the Facilities Engineering Handbook (NHB 7320.1) and provides additional policies and criteria for uniform application to ventilation systems. It expands basic requirements, provides additional design and construction guidance, and places emphasis on those design considerations which will provide for greater effectiveness in the use of these systems. The provisions of this handbook are applicable to all NASA field installations and the Jet Propulsion Laboratory. Since supply of this handbook is limited, abstracts of the portion or portions applicable to a given requirement will be made for the individual specific needs encountered rather than supplying copies of the handbook as has been past practice.

  14. Nano-G Laboratory

    NASA Technical Reports Server (NTRS)

    Von Bun, Friedrich O.; Garriott, O. K.

    1990-01-01

    Freely floating platform isolated from all but gravity gradient forces. Report discribes conceptual orbiting spacecraft laboratory that creates environment where acceleration does not exceed 10 to the negative 9th power that of normal acceleration at surface of Earth. Consists of two parts: outer part (spacecraft) and separable inner free-floating part housing experimental apparatus. Equipped with radio and/or optical communication links for control of experiment and recording of data. Used for research in such delicate phenomena as the lambda transition in helium, growth of crystals, and formation of alloys separating into constituents before solidification if gravitation (G) present.

  15. Virtual holographic laboratory

    NASA Astrophysics Data System (ADS)

    Calvo, M. L.; Alieva, T.; Rodrigo, J. A.; Martínez-Matos, O.; Moreno, A.; Aliev, T.

    2007-06-01

    In this work we present a Virtual Holographic Laboratory for educational purposes. This project is edited on DVD support and it has been designed to be interactive: schemes, pictures, videos in order to clarify the theoretical description of the phenomena improving the understanding of its fundamental concepts. We believe that this project is helpful for undergraduate and graduate students in physics and engineering to obtain the solid knowledge about holography and to prepare for practical lessons on holography or partially substitute the lasts in the case of absence of appropriated technical base at a specific university level.

  16. Materials Science Laboratory

    NASA Technical Reports Server (NTRS)

    Jackson, Dionne

    2005-01-01

    The NASA Materials Science Laboratory (MSL) provides science and engineering services to NASA and Contractor customers at KSC, including those working for the Space Shuttle. International Space Station. and Launch Services Programs. These services include: (1) Independent/unbiased failure analysis (2) Support to Accident/Mishap Investigation Boards (3) Materials testing and evaluation (4) Materials and Processes (M&P) engineering consultation (5) Metrology (6) Chemical analysis (including ID of unknown materials) (7) Mechanical design and fabrication We provide unique solutions to unusual and urgent problems associated with aerospace flight hardware, ground support equipment and related facilities.

  17. The hydrologic laboratory

    USGS Publications Warehouse

    Johnson, A.I.

    1963-01-01

    The knowledge of soil and rock testing, including the application of the test or analysis data to field problems, is still in its infancy. By learning more about the basic laws and principles of nature we can more accurately predict hydrologic phenomena of the future, as well as solve more efficiently the hydrologic problems of the present Our reservoir of fundamental facts and basic knowledge has been, and can be even more fully, increased by the analysis and research work of the Hydrologic Laboratory.

  18. Gait Analysis Laboratory

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Complete motion analysis laboratory has evolved out of analyzing walking patterns of crippled children at Stanford Children's Hospital. Data is collected by placing tiny electrical sensors over muscle groups of child's legs and inserting step-sensing switches in soles of shoes. Miniature radio transmitters send signals to receiver for continuous recording of abnormal walking pattern. Engineers are working to apply space electronics miniaturization techniques to reduce size and weight of telemetry system further as well as striving to increase signal bandwidth so analysis can be performed faster and more accurately using a mini-computer.

  19. Princeton Plasma Physics Laboratory

    SciTech Connect

    Not Available

    1990-01-01

    This report discusses the following topics: principal parameters achieved in experimental devices fiscal year 1990; tokamak fusion test reactor; compact ignition tokamak; Princeton beta experiment- modification; current drive experiment-upgrade; international collaboration; x-ray laser studies; spacecraft glow experiment; plasma processing: deposition and etching of thin films; theoretical studies; tokamak modeling; international thermonuclear experimental reactor; engineering department; project planning and safety office; quality assurance and reliability; technology transfer; administrative operations; PPPL patent invention disclosures for fiscal year 1990; graduate education; plasma physics; graduate education: plasma science and technology; science education program; and Princeton Plasma Physics Laboratory reports fiscal year 1990.

  20. [Accreditation of forensic laboratories].

    PubMed

    Sołtyszewski, Ireneusz

    2010-01-01

    According to the framework decision of the European Union Council, genetic laboratories which perform tests for the benefit of the law enforcement agencies and the administration of justice are required to obtain a certificate of accreditation testifying to compliance with the PN EN ISO/IEC 17025:2005 standard. The certificate is the official confirmation of the competence to perform research, an acknowledgement of credibility, impartiality and professional independence. It is also the proof of establishment, implementation and maintenance of an appropriate management system. The article presents the legal basis for accreditation, the procedure of obtaining the certificate of accreditation and selected elements of the management system. PMID:21863740

  1. The Physics Laboratory in Honduras.

    ERIC Educational Resources Information Center

    Zuniga, M. A.

    1979-01-01

    This paper, presented at the conference on the role of the laboratory in physics education, which was held in Oxford, England in July 1978, describes the role of the laboratory in school and university physics in Honduras. (HM)

  2. EPA LABORATORIES IMPLEMENT EMS PROGRAM

    EPA Science Inventory

    This paper highlights the breadth and magnitude of carrying out an effective Environmental Management System (EMS) program at the U.S. EPA's research and development laboratories. Federal research laboratories have unique operating challenges compared to more centralized industr...

  3. How Reliable Is Laboratory Testing?

    MedlinePlus

    ... to day in a laboratory. The other two, sensitivity and specificity, deal with how well the test ... are frequently monitored by the professional laboratory personnel. Sensitivity and specificity data are determined by research studies ...

  4. Nanophotonics at Sandia National Laboratories.

    SciTech Connect

    McCormick, Frederick Bossert

    2008-10-01

    Sandia National Laboratories is leveraging the extensive CMOS, MEMS, compound semiconductor, and nanotechnology fabrication and test resources at Sandia National Laboratories to explore new science and technology in photonic crystals, plasmonics, metamaterials, and silicon photonics.

  5. EM laboratories for linear coupling

    SciTech Connect

    King, R.J.; Hudson, H.G.; McLeod R.R.

    1987-01-01

    Broadband, well calibrated, sensitive, and automated laboratories are essential for conducting meaningful phenomenology and susceptibility characterization studies. This presentation gives an overview reflecting the facilities and experiences at Lawrence Livermore National Laboratory.

  6. The Laboratory in Professional Education.

    ERIC Educational Resources Information Center

    Kaplan, Harold N.

    1979-01-01

    The role of laboratory experience in professional education is discussed. Although laboratory experiments are often expensive and demanding on faculty time, they can offer a unique experience to the veterinary medicine student. (BH)

  7. Mobile Energy Laboratory Procedures

    SciTech Connect

    Armstrong, P.R.; Batishko, C.R.; Dittmer, A.L.; Hadley, D.L.; Stoops, J.L.

    1993-09-01

    Pacific Northwest Laboratory (PNL) has been tasked to plan and implement a framework for measuring and analyzing the efficiency of on-site energy conversion, distribution, and end-use application on federal facilities as part of its overall technical support to the US Department of Energy (DOE) Federal Energy Management Program (FEMP). The Mobile Energy Laboratory (MEL) Procedures establish guidelines for specific activities performed by PNL staff. PNL provided sophisticated energy monitoring, auditing, and analysis equipment for on-site evaluation of energy use efficiency. Specially trained engineers and technicians were provided to conduct tests in a safe and efficient manner with the assistance of host facility staff and contractors. Reports were produced to describe test procedures, results, and suggested courses of action. These reports may be used to justify changes in operating procedures, maintenance efforts, system designs, or energy-using equipment. The MEL capabilities can subsequently be used to assess the results of energy conservation projects. These procedures recognize the need for centralized NM administration, test procedure development, operator training, and technical oversight. This need is evidenced by increasing requests fbr MEL use and the economies available by having trained, full-time MEL operators and near continuous MEL operation. DOE will assign new equipment and upgrade existing equipment as new capabilities are developed. The equipment and trained technicians will be made available to federal agencies that provide funding for the direct costs associated with MEL use.

  8. Tethered gravity laboratories study

    NASA Technical Reports Server (NTRS)

    Lucchetti, F.

    1990-01-01

    The scope of the study is to investigate ways of controlling the microgravity environment of the International Space Station by means of a tethered system. Four main study tasks were performed. First, researchers analyzed the utilization of the tether systems to improve the lowest possible steady gravity level on the Space Station and the tether capability to actively control the center of gravity position in order to compensate for activities that would upset the mass distribution of the Station. The purpose of the second task was to evaluate the whole of the experiments performable in a variable gravity environment and the related beneficial residual accelerations, both for pure and applied research in the fields of fluid, materials, and life science, so as to assess the relevance of a variable g-level laboratory. The third task involves the Tethered Variable Gravity Laboratory. The use of the facility that would crawl along a deployed tether and expose experiments to varying intensities of reduced gravity is discussed. Last, a study performed on the Attitude Tether Stabilizer concept is discussed. The stabilization effect of ballast masses tethered to the Space Station was investigated as a means of assisting the attitude control system of the Station.

  9. Laboratory diagnosis of Leishmania.

    PubMed

    Palma, G; Gutierrez, Y

    1991-12-01

    Leishmaniasis should be considered in the differential diagnosis of individuals living in or with a history of having traveled to known endemic areas and who present with signs and symptoms of visceral infection or with cutaneous or mucosal lesions. Because leishmaniae are capable of producing a wide spectrum of disease in humans, the clinical manifestations overlap with many other diseases. Definitive diagnosis of Leishmania infection in the laboratory requires demonstration of the parasite in smears, in biopsies, or by isolation of the organism in culture media or in experimental animals. Many other methods for demonstration of parasites (histochemical and immunohistochemical) or for detecting the presence of antibodies against leishmaniae (serologic) have been described. Many advances have been made in these areas, but the methodology and the technology involved in immunohistochemistry and serology remain outside the reach of the standard clinical diagnostic laboratory, which both in developed and less developed countries still relies on demonstration of the parasites in smears stained with Giemsa stain and on biopsy specimens processed and stained with hematoxylin and eosin stain. The newer serologic techniques, such as ELISA with several variations, IFAT, and others, are largely research tools with the greatest use in seroepidemiologic surveys.

  10. Roles of laboratories and laboratory systems in effective tuberculosis programmes.

    PubMed

    Ridderhof, John C; van Deun, Armand; Kam, Kai Man; Narayanan, P R; Aziz, Mohamed Abdul

    2007-05-01

    Laboratories and laboratory networks are a fundamental component of tuberculosis (TB) control, providing testing for diagnosis, surveillance and treatment monitoring at every level of the health-care system. New initiatives and resources to strengthen laboratory capacity and implement rapid and new diagnostic tests for TB will require recognition that laboratories are systems that require quality standards, appropriate human resources, and attention to safety in addition to supplies and equipment. To prepare the laboratory networks for new diagnostics and expanded capacity, we need to focus efforts on strengthening quality management systems (QMS) through additional resources for external quality assessment programmes for microscopy, culture, drug susceptibility testing (DST) and molecular diagnostics. QMS should also promote development of accreditation programmes to ensure adherence to standards to improve both the quality and credibility of the laboratory system within TB programmes. Corresponding attention must be given to addressing human resources at every level of the laboratory, with special consideration being given to new programmes for laboratory management and leadership skills. Strengthening laboratory networks will also involve setting up partnerships between TB programmes and those seeking to control other diseases in order to pool resources and to promote advocacy for quality standards, to develop strategies to integrate laboratories functions and to extend control programme activities to the private sector. Improving the laboratory system will assure that increased resources, in the form of supplies, equipment and facilities, will be invested in networks that are capable of providing effective testing to meet the goals of the Global Plan to Stop TB.

  11. Introductory Archaeology: The Inexpensive Laboratory.

    ERIC Educational Resources Information Center

    Rice, Patricia C.

    1990-01-01

    Describes a number of student-focused laboratory exercises that are inexpensive, yet show the scientific character of archaeology. Describes the environmental laboratory exercise which includes the following analysis topics: (1) pollen; (2) earth core; (3) microfaunal; and (4) microwear. Describes the ceramic laboratory which involves…

  12. Chemistry laboratory safety manual available

    NASA Technical Reports Server (NTRS)

    Elsbrock, R. G.

    1968-01-01

    Chemistry laboratory safety manual outlines safe practices for handling hazardous chemicals and chemistry laboratory equipment. Included are discussions of chemical hazards relating to fire, health, explosion, safety equipment and procedures for certain laboratory techniques and manipulations involving glassware, vacuum equipment, acids, bases, and volatile solvents.

  13. Laboratory Materials: Affordances or Constraints?

    ERIC Educational Resources Information Center

    Jordan, Rebecca C.; Ruibal-Villasenor, Maria; Hmelo-Silver, Cindy E.; Etkina, Eugenia

    2011-01-01

    Laboratory instruction is critical to the understanding of biology and is a central piece of biological sciences instruction. Although much investigation has focused on the content of biology laboratory exercises, we contend that understanding the extent to which the laboratory materials can aid or limit experimental investigation is of equal…

  14. Diversifying the Introductory Physics Laboratory.

    ERIC Educational Resources Information Center

    Jewett, John W., Jr.; Lessie, Douglas

    1983-01-01

    Describes a two-semester laboratory program designed to motivate students. The program consists of computer-oriented modules and discovery approach laboratory exercises. Students complete similar computer/laboratory material during the first semester but elect one of three tracks during the second semester (computer, every-day life, and…

  15. Laboratory for Radiokrypton Dating

    NASA Astrophysics Data System (ADS)

    Lu, Z.; Bailey, K.; Jiang, W.; Müller, P.; O'Connor, T. P.; Zappala, J. C.

    2013-12-01

    Due to its simple production and transport processes in the terrestrial environment, the long-lived noble-gas isotope 81Kr (half-life = 230 kyr) is the ideal tracer for studying old water and ice in the age range of 10^5-10^6 years, a range beyond the reach of 14C. 81Kr dating, a concept pursued in the past four decades by numerous laboratories employing a variety of techniques, is now available for the first time to the earth science community at large. This is made possible by the development of ATTA-3 (Jiang et al., GCA 91, 1-6; 2012), an efficient and selective atom counter based on the Atom Trap Trace Analysis method (Chen et al., Science 286, 1139-1141; 1999). The instrument is capable of measuring both 81Kr/Kr and 85Kr/Kr ratios of environmental samples in the range of 10^-14-10^-10. For 81Kr-dating in the age range of 150 - 1,500 kyr, the required sample size is 5 - 10 micro-L STP of krypton gas, which can be extracted from approximately 100 - 200 kg of water or 40 - 80 kg of ice. For 85Kr/Kr analysis, the required sample size is generally smaller by an order of magnitude because of the isotope's higher initial abundance in the atmosphere. The Laboratory for Radiokrypton Dating is currently equipped to analyze up to 120 samples per year. With future equipment upgrades, this limit can be increased as demand grows. In the period since November 2011, the Laboratory has measured both 81Kr/Kr and 85Kr/Kr ratios in over 50 samples that had been extracted by collaborators from six different continents. The samples were from groundwater wells in the Great Artesian Basin (Australia), Guarani Aquifer (Brazil), and Locust Grove (Maryland); from brine wells of the Waste Isolation Pilot Plant (New Mexico); from geothermal steam vents in Yellowstone National Park; from near-surface ice at Taylor Glacier, Antarctica; and from deep mines in South Africa. Sample collection and purification was performed by groups including the University of Illinois at Chicago, University

  16. Laboratory maintenance of Agrobacterium.

    PubMed

    Morton, Elise R; Fuqua, Clay

    2012-02-01

    Agrobacterium species are plant-associated relatives of the rhizobia. Several species cause plant diseases such as crown gall and hairy root, although there are also avirulent species. A. tumefaciens is the most intensively studied species and causes crown gall, a neoplastic disease that occurs on a variety of plants. Virulence is specified by large plasmids, and in the case of A. tumefaciens this is called the Ti (tumor-inducing) plasmid. During pathogenesis, virulent agrobacteria copy a segment of the Ti plasmid and transfer it to the plant, where it subsequently integrates into the plant genome and expresses genes that result in the disease symptoms. A. tumefaciens has been used extensively as a plant genetic engineering tool, and is also a model microorganism that has been well studied for host-microbe associations, horizontal gene transfer, cell-cell communication, and biofilm formation. This unit describes standard protocols for laboratory cultivation of A. tumefaciens. PMID:22307549

  17. Computer integrated laboratory testing

    NASA Technical Reports Server (NTRS)

    Dahl, Charles C.

    1992-01-01

    The objective is the integration of computers into the Engineering Materials Science Laboratory course, where existing test equipment is not computerized. The first lab procedure is to demonstrate and produce a material phase change curve. The second procedure is a demonstration of the modulus of elasticity and related stress-strain curve, plastic performance, maximum and failure strength. The process of recording data by sensors that are connected to a data logger which adds a time base, and the data logger in turn connected to a computer, places the materials labs into a computer integrated mode with minimum expense and maximum flexibility. The sensor signals are input into a spread sheet for tabular records, curve generation, and graph printing.

  18. First International Microgravity Laboratory

    NASA Astrophysics Data System (ADS)

    McMahan, Tracy; Shea, Charlotte; Wiginton, Margaret; Neal, Valerie; Gately, Michele; Hunt, Lila; Graben, Jean; Tiderman, Julie; Accardi, Denise

    This colorful booklet presents capsule information on every aspect of the International Microgravity Laboratory (IML). As part of Spacelab, IML is divided into Life Science Experiments and Materials Science Experiments. Because the life and materials sciences use different Spacelab resources, they are logically paired on the IML missions. Life science investigations generally require significant crew involvement, and crew members often participate as test subjects or operators. Materials missions capitalize on these complementary experiments. International cooperation consists in participation by the European Space Agency, Canada, France, Germany, and Japan who are all partners in developing hardware and experiments of IML missions. IML experiments are crucial to future space ventures, like the development of Space Station Freedom, the establishment of lunar colonies, and the exploration of other planets. Principal investigators are identified for each experiment.

  19. First International Microgravity Laboratory

    NASA Technical Reports Server (NTRS)

    Mcmahan, Tracy; Shea, Charlotte; Wiginton, Margaret; Neal, Valerie; Gately, Michele; Hunt, Lila; Graben, Jean; Tiderman, Julie; Accardi, Denise

    1990-01-01

    This colorful booklet presents capsule information on every aspect of the International Microgravity Laboratory (IML). As part of Spacelab, IML is divided into Life Science Experiments and Materials Science Experiments. Because the life and materials sciences use different Spacelab resources, they are logically paired on the IML missions. Life science investigations generally require significant crew involvement, and crew members often participate as test subjects or operators. Materials missions capitalize on these complementary experiments. International cooperation consists in participation by the European Space Agency, Canada, France, Germany, and Japan who are all partners in developing hardware and experiments of IML missions. IML experiments are crucial to future space ventures, like the development of Space Station Freedom, the establishment of lunar colonies, and the exploration of other planets. Principal investigators are identified for each experiment.

  20. Cloning the laboratory mouse.

    PubMed

    Wakayama, T; Yanagimachi, R

    1999-06-01

    A brief account is given of early attempts to clone mammals (mice) by transferring cells (nuclei) of preimplantation embryos into enucleated oocytes, zygotes or blastomeres of two-cell embryos. This is followed by a brief review of recent successes using adult somatic cells: mammary gland cells for sheep, muscle cells for cattle and cumulus cells for mice. We have developed a technique for cloning the laboratory mouse by transferring cumulus cell nuclei into enucleated oocytes. With this technique, we have produced a population of over 80 cloned animals, and have carried the process over four generations. Development and fertility of these appear normal. However, the yield is very low; only approximately 1% of injected oocytes are carried to term. The challenge is now to understand the reason for this high loss. Is it a problem of technique, genomic reprogramming, somatic mutation, imprinting or incompatible cell cycle phases?

  1. Mars Science Laboratory Drill

    NASA Technical Reports Server (NTRS)

    Okon, Avi B.

    2010-01-01

    The Drill for the Mars Science Laboratory mission is a rotary-percussive sample acquisition device with an emphasis on toughness and robustness to handle the harsh environment on Mars. The unique challenges associated with autonomous drilling from a mobile robot are addressed. A highly compressed development schedule dictated a modular design architecture that satisfies the functional and load requirements while allowing independent development and testing of the Drill subassemblies. The Drill consists of four actuated mechanisms: a spindle that rotates the bit, a chuck that releases and engages bits, a novel voice-coil-based percussion mechanism that hammers the bit, and a linear translation mechanism. The Drill has three passive mechanisms: a replaceable bit assembly that acquires and collects sample, a contact sensor / stabilizer mechanism, and, lastly a flex harness service loop. This paper describes the various mechanisms that makeup the Drill and discusses the solutions to their unique design and development challenges.

  2. Tochilinite Produced in Laboratory

    NASA Astrophysics Data System (ADS)

    Kozerenko, S. V.; Organova, N. J.; Fadeev, V. V.; Magazina, L. O.; Kolpakova, N. N.; Kopneva, L. A.

    1996-03-01

    Tochilinite was firstly identified in the serpentinites from Voronezh region, Russia, in 1971. Later this mineral was recognized to be a major matrix phase of the most primitive carbonaceous chondrites (CI, CM) where tochilinite as a mixed-layer structure occurs among serpentine group minerals, olivine, pyroxene, pyrrhotite etc. Terrestrial tochilinite has been suggested to result from low-temperature hydrothermal alteration of serpentinite. The origin of the chondritic tochilinite is still not known, partly because of failure to synthesis this mineral. As for as we know, since 1971, there was no publication about successful synthesis of tochilinite. Here we present results of the first laboratory synthesis of tochilinite as a product of interaction of Fe(II) hydroxides with H2S at 80 degrees C, and total concentration of reduced sulfur ions in solution lower than 10-4M at pH 7.8 and lower than 1M at pH 11.5.

  3. An Organoleptic Laboratory Experiment

    NASA Astrophysics Data System (ADS)

    Risley, John M.

    1996-12-01

    Flavorings in foods and fragrances in personal care products is a topic often discussed in chemistry classes designed for the general education of non-science majors. A laboratory experiment has been designed to accompany the lecture topic. Compounds in ten different classes of organic molecules that are used in the fragrance and food industry are provided to students. Students whiff the vapors of each compound and describe the organoleptic properties using a set of terms utilized in the fragrance and food industry. A set of questions guides students to an understanding of the relationship between structure of molecules and smell. Students are permitted to create their own fragrance based on the results of the experiment. Student response has been favorable. The experiment rectifies misconceptions students have about structure and odor, and gives positive reinforcement to the lecture material.

  4. Los Alamos National Laboratory

    SciTech Connect

    Dogliani, Harold O

    2011-01-19

    The purpose of the briefing is to describe general laboratory technical capabilities to be used for various groups such as military cadets or university faculty/students and post docs to recruit into a variety of Los Alamos programs. Discussed are: (1) development and application of high leverage science to enable effeictive, predictable and reliability outcomes; (2) deter, detect, characterize, reverse and prevent the proliferation of weapons of mass destruction and their use by adversaries and terrorists; (3) modeling and simulation to define complex processes, predict outcomes, and develop effective prevention, response, and remediation strategies; (4) energetic materials and hydrodynamic testing to develop materials for precise delivery of focused energy; (5) materials cience focused on fundamental understanding of materials behaviors, their quantum-molecular properties, and their dynamic responses, and (6) bio-science to rapidly detect and characterize pathogens, to develop vaccines and prophylactic remedies, and to develop attribution forensics.

  5. The autonomic laboratory

    NASA Technical Reports Server (NTRS)

    Low, P. A.; Opfer-Gehrking, T. L.

    1999-01-01

    The autonomic nervous system can now be studied quantitatively, noninvasively, and reproducibly in a clinical autonomic laboratory. The approach at the Mayo Clinic is to study the postganglionic sympathetic nerve fibers of peripheral nerve (using the quantitative sudomotor axon reflex test [QSART]), the parasympathetic nerves to the heart (cardiovagal tests), and the regulation of blood pressure by the baroreflexes (adrenergic tests). Patient preparation is extremely important, since the state of the patient influences the results of autonomic function tests. The autonomic technologist in this evolving field needs to have a solid core of knowledge of autonomic physiology and autonomic function tests, followed by training in the performance of these tests in a standardized fashion. The range and utilization of tests of autonomic function will likely continue to evolve.

  6. FORT Molecular Ecology Laboratory

    USGS Publications Warehouse

    Oyler-McCance, Sara J.; Stevens, P.D.

    2011-01-01

    The mission of the U.S. Geological Survey (USGS) at the Fort Collins Science Center Molecular Ecology Laboratory is to use the tools and concepts of molecular genetics to address a variety of complex management questions and conservation issues facing the management of the Nation's fish and wildlife resources. Together with our partners, we design and implement studies to document genetic diversity and the distribution of genetic variation among individuals, populations, and species. Information from these studies is used to support wildlife-management planning and conservation actions. Current and past studies have provided information to assess taxonomic boundaries, inform listing decisions made under the Endangered Species Act, identify unique or genetically depauperate populations, estimate population size or survival rates, develop management or recovery plans, breed wildlife in captivity, relocate wildlife from one location to another, and assess the effects of environmental change.

  7. [ISO 15189 medical laboratory accreditation].

    PubMed

    Aoyagi, Tsutomu

    2004-10-01

    This International Standard, based upon ISO/IEC 17025 and ISO 9001, provides requirements for competence and quality that are particular to medical laboratories. While this International Standard is intended for use throughout the currently recognized disciplines of medical laboratory services, those working in other services and disciplines will also find it useful and appropriate. In addition, bodies engaged in the recognition of the competence of medical laboratories will be able to use this International Standard as the basis for their activities. The Japan Accreditation Board for Conformity Assessment (AB) and the Japanese Committee for Clinical Laboratory Standards (CCLS) are jointly developing the program of accreditation of medical laboratories. ISO 15189 requirements consist of two parts, one is management requirements and the other is technical requirements. The former includes the requirements of all parts of ISO 9001, moreover it includes the requirement of conformity assessment body, for example, impartiality and independence from any other party. The latter includes the requirements of laboratory competence (e.g. personnel, facility, instrument, and examination methods), moreover it requires that laboratories shall participate proficiency testing(s) and laboratories' examination results shall have traceability of measurements and implement uncertainty of measurement. Implementation of ISO 15189 will result in a significant improvement in medical laboratories management system and their technical competence. The accreditation of medical laboratory will improve medical laboratory service and be useful for patients.

  8. Interaction between clinic and laboratory.

    PubMed

    Armstrong, Elina; Joutsi-Korhonen, Lotta; Lassila, Riitta

    2011-01-01

    Clinicians order laboratory tests to diagnose, monitor, and screen for diseases, to evaluate or confirm previously abnormal results and to develop prognoses. The rigorous quality assurance programs, large automated processes and economic constraints may induce direct challenges to tailored diagnosis. Clinicians will have to gain an understanding of the underlying principles of laboratory technologies without losing their ability to practice 'the art of medicine' at their primary focus - the patient. Specialized laboratory services and expertise play especially important roles in coagulation hematology. Assays are technically demanding and often based on functional properties of proteins, producing results that are far more than plain numbers. Interpretation of laboratory data poses many challenges, such as pre-analytical and patient-dependent factors, of which the laboratory is often not well informed, but which the clinicians are required to take into account. The laboratory scientist needs to understand the multiple clinical circumstances causing variance or interference in the laboratory results. Direct interaction between clinic and laboratory is needed. When laboratory-specific issues are uncertain to the clinician, the laboratory scientist should become the clinician's primary consultant. The better the education and knowledge of both directions, the better the outcome. Regular multidisciplinary rounds by the clinicians and the laboratory scientists are of great benefit. This interaction at its best fosters research and development by identifying new mechanisms and tools. PMID:21193109

  9. [ISO 15189 medical laboratory accreditation].

    PubMed

    Aoyagi, Tsutomu

    2004-10-01

    This International Standard, based upon ISO/IEC 17025 and ISO 9001, provides requirements for competence and quality that are particular to medical laboratories. While this International Standard is intended for use throughout the currently recognized disciplines of medical laboratory services, those working in other services and disciplines will also find it useful and appropriate. In addition, bodies engaged in the recognition of the competence of medical laboratories will be able to use this International Standard as the basis for their activities. The Japan Accreditation Board for Conformity Assessment (AB) and the Japanese Committee for Clinical Laboratory Standards (CCLS) are jointly developing the program of accreditation of medical laboratories. ISO 15189 requirements consist of two parts, one is management requirements and the other is technical requirements. The former includes the requirements of all parts of ISO 9001, moreover it includes the requirement of conformity assessment body, for example, impartiality and independence from any other party. The latter includes the requirements of laboratory competence (e.g. personnel, facility, instrument, and examination methods), moreover it requires that laboratories shall participate proficiency testing(s) and laboratories' examination results shall have traceability of measurements and implement uncertainty of measurement. Implementation of ISO 15189 will result in a significant improvement in medical laboratories management system and their technical competence. The accreditation of medical laboratory will improve medical laboratory service and be useful for patients. PMID:15624503

  10. The Laboratory for Terrestrial Physics

    NASA Technical Reports Server (NTRS)

    2003-01-01

    The Laboratory for Terrestrial Physics is dedicated to the advancement of knowledge in Earth and planetary science, by conducting innovative research using space technology. The Laboratory's mission and activities support the work and new initiatives at NASA's Goddard Space Flight Center (GSFC). The Laboratory's success contributes to the Earth Science Directorate as a national resource for studies of Earth from Space. The Laboratory is part of the Earth Science Directorate based at the GSFC in Greenbelt, MD. The Directorate itself is comprised of the Global Change Data Center (GCDC), the Space Data and Computing Division (SDCD), and four science Laboratories, including Laboratory for Terrestrial Physics, Laboratory for Atmospheres, and Laboratory for Hydrospheric Processes all in Greenbelt, MD. The fourth research organization, Goddard Institute for Space Studies (GISS), is in New York, NY. Relevant to NASA's Strategic Plan, the Laboratory ensures that all work undertaken and completed is within the vision of GSFC. The philosophy of the Laboratory is to balance the completion of near term goals, while building on the Laboratory's achievements as a foundation for the scientific challenges in the future.

  11. Creating the laboratory`s future; A strategy for Lawrence Livermore National Laboratory

    SciTech Connect

    1997-09-01

    ``Creating The Laboratory`s Future`` describes Livermore`s roles and responsibilities as a Department of Energy (DOE) national laboratory and sets the foundation for decisions about the Laboratory`s programs and operations. It summarizes Livermore`s near-term strategy, which builds on recent Lab achievements and world events affecting their future. It also discusses their programmatic and operational emphases and highlights program areas that the authors believe can grow through application of Lab science and technology. Creating the Laboratory`s Future reflects their very strong focus on national security, important changes in the character of their national security work, major efforts are under way to overhaul their administrative and operational systems, and the continuing challenge of achieving national consensus on the role of the government in energy, environment, and the biosciences.

  12. Laboratory development TPV generator

    NASA Astrophysics Data System (ADS)

    Holmquist, Glenn A.; Wong, Eva M.; Waldman, Cye H.

    1996-02-01

    A laboratory model of a TPV generator in the kilowatt range was developed and tested. It was based on methane/oxygen combustion and a spectrally matched selective emitter/collector pair (ytterbia emitter-silicon PV cell). The system demonstrated a power output of 2.4 kilowatts at an overall efficiency of 4.5% without recuperation of heat from the exhaust gases. Key aspects of the effort include: 1) process development and fabrication of mechanically strong selective emitter ceramic textile materials; 2) design of a stirred reactor emitter/burner capable of handling up to 175,000 Btu/hr fuel flows; 3) support to the developer of the production silicon concentrator cells capable of withstanding TPV environments; 4) assessing the apparent temperature exponent of selective emitters; and 5) determining that the remaining generator efficiency improvements are readily defined combustion engineering problems that do not necessitate breakthrough technology. The fiber matrix selective emitter ceramic textile (felt) was fabricated by a relic process with the final heat-treatment controlling the grain growth in the porous ceramic fiber matrix. This textile formed a cylindrical cavity for a stirred reactor. The ideal stirred reactor is characterized by constant temperature combustion resulting in a uniform reactor temperature. This results in a uniform radiant emission from the emitter. As a result of significant developments in the porous emitter matrix technology, a TPV generator burner/emitter was developed that produced kilowatts of radiant energy.

  13. Laboratory experiments on fronts

    NASA Astrophysics Data System (ADS)

    Chia, F.; Griffiths, R. W.; Linden, P. F.

    We describe a laboratory model of an upwelling front in a two-layer stratification. In the model the interface between the two layers slopes upwards toward a vertical boundary (or coastline) and can intersect the free surface to produce a front. Fluid motion in each layer is density driven and, in the undisturbed state, is in quasi-geostrophic balance. The front is observed to be unstable to (ageostrophic) disturbances with an along-front wavelength proportional to the Rossby radius of deformation. At very large amplitudes these unstable waves form closed circulations. However, in contrast to the behaviour of fronts far from vertical boundaries, where cyclone-anticyclone vortex pairs are formed, the presence of the coastline inhibits formation of anticyclonic eddies in the upper layer and enhances cyclonic rings of upper layer fluid which lie above cyclonic eddies in the lower layer. The cyclones move away from the vertical boundary and (as is also the case when no vertical boundary is present) they appear at the surface as eddies containing lower layer fluid on the seaward side of the mean frontal position.

  14. Laboratory Alluvial Rivers

    NASA Astrophysics Data System (ADS)

    Devauchelle, O.; Abramian, A.; Seizilles, G.; Lajeunesse, E.

    2015-12-01

    By which physical mechanisms does a river select its shape and size? We investigate this question using small laboratory rivers formed by laminar flows.In its simplest form, this experiment consists in a flow of glycerol over a uniform layer of plastic sediments. After a few hours, a channel forms spontaneously, and eventually reaches a stable geometry. This equilibrium state corresponds accurately to the force balance proposed by Henderson (1961).If we impose a sediment discharge at the inlet of the experiment, the river adjusts to this boundary condition by widening its channel. Observation suggests that this new equilibrium results from the balance between gravity, which pulls the entrained grains towards the center of the channel, and bedload diffusion, which returns them towards the banks. This balance explains why experimental rivers get wider and shallower as their sediment load increases.However, to test quantitatively this theory against observation, we need to evaluate independently the effect of transverse slope on bedload transport. We propose to use an instability generated by bedload diffusion to do so.

  15. Automated Microbial Metabolism Laboratory

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The Automated Microbial Metabolism Laboratory (AMML) 1971-1972 program involved the investigation of three separate life detection schemes. The first was a continued further development of the labeled release experiment. The possibility of chamber reuse without inbetween sterilization, to provide comparative biochemical information was tested. Findings show that individual substrates or concentrations of antimetabolites may be sequentially added to a single test chamber. The second detection system which was investigated for possible inclusion in the AMML package of assays, was nitrogen fixation as detected by acetylene reduction. Thirdly, a series of preliminary steps were taken to investigate the feasibility of detecting biopolymers in soil. A strategy for the safe return to Earth of a Mars sample prior to manned landings on Mars is outlined. The program assumes that the probability of indigenous life on Mars is unity and then broadly presents the procedures for acquisition and analysis of the Mars sample in a manner to satisfy the scientific community and the public that adequate safeguards are being taken.

  16. Errors in clinical laboratories or errors in laboratory medicine?

    PubMed

    Plebani, Mario

    2006-01-01

    Laboratory testing is a highly complex process and, although laboratory services are relatively safe, they are not as safe as they could or should be. Clinical laboratories have long focused their attention on quality control methods and quality assessment programs dealing with analytical aspects of testing. However, a growing body of evidence accumulated in recent decades demonstrates that quality in clinical laboratories cannot be assured by merely focusing on purely analytical aspects. The more recent surveys on errors in laboratory medicine conclude that in the delivery of laboratory testing, mistakes occur more frequently before (pre-analytical) and after (post-analytical) the test has been performed. Most errors are due to pre-analytical factors (46-68.2% of total errors), while a high error rate (18.5-47% of total errors) has also been found in the post-analytical phase. Errors due to analytical problems have been significantly reduced over time, but there is evidence that, particularly for immunoassays, interference may have a serious impact on patients. A description of the most frequent and risky pre-, intra- and post-analytical errors and advice on practical steps for measuring and reducing the risk of errors is therefore given in the present paper. Many mistakes in the Total Testing Process are called "laboratory errors", although these may be due to poor communication, action taken by others involved in the testing process (e.g., physicians, nurses and phlebotomists), or poorly designed processes, all of which are beyond the laboratory's control. Likewise, there is evidence that laboratory information is only partially utilized. A recent document from the International Organization for Standardization (ISO) recommends a new, broader definition of the term "laboratory error" and a classification of errors according to different criteria. In a modern approach to total quality, centered on patients' needs and satisfaction, the risk of errors and mistakes

  17. Whole Class Laboratories: More Examples

    NASA Astrophysics Data System (ADS)

    Kouh, Minjoon

    2016-03-01

    Typically, introductory physics courses are taught with a combination of lectures and laboratories in which students have opportunities to discover the natural laws through hands-on activities in small groups. This article reports the use of Google Drive, a free online document-sharing tool, in physics laboratories for pooling experimental data from the whole class. This pedagogical method was reported earlier, and the present article offers a few more examples of such "whole class" laboratories.

  18. Ethical Inspection about laboratory animals.

    PubMed

    Yang, Nai-bin; Pan, Xiao-jun; Cheng, Jing-jing; Lin, Jia-qiang; Zhu, Jia-yin

    2015-11-01

    Laboratory animals and animal experiments are foundations and important support conditions for life sciences, especially for medical research. The animal experiments have drawn extensive attention from the society because of the ethical issue. This paper takes Wenzhou Medical University as an example to give a brief introduction to the ethical review about laboratory animals in the university so as to further draw attention and concerns from the public about the ethical issue of laboratory animals. We successively introduce its scientific projects, nurturing environment and ethical review of laboratory animals.

  19. Ethical Inspection about laboratory animals.

    PubMed

    Yang, Nai-bin; Pan, Xiao-jun; Cheng, Jing-jing; Lin, Jia-qiang; Zhu, Jia-yin

    2015-11-01

    Laboratory animals and animal experiments are foundations and important support conditions for life sciences, especially for medical research. The animal experiments have drawn extensive attention from the society because of the ethical issue. This paper takes Wenzhou Medical University as an example to give a brief introduction to the ethical review about laboratory animals in the university so as to further draw attention and concerns from the public about the ethical issue of laboratory animals. We successively introduce its scientific projects, nurturing environment and ethical review of laboratory animals. PMID:27215017

  20. [Laboratory accreditation and proficiency testing].

    PubMed

    Kuwa, Katsuhiko

    2003-05-01

    ISO/TC 212 covering clinical laboratory testing and in vitro diagnostic test systems will issue the international standard for medical laboratory quality and competence requirements, ISO 15189. This standard is based on the ISO/IEC 17025, general requirements for competence of testing and calibration laboratories and ISO 9001, quality management systems-requirements. Clinical laboratory services are essential to patient care and therefore should be available to meet the needs of all patients and clinical personnel responsible for human health care. If a laboratory seeks accreditation, it should select an accreditation body that operates according to this international standard and in a manner which takes into account the particular requirements of clinical laboratories. Proficiency testing should be available to evaluate the calibration laboratories and reference measurement laboratories in clinical medicine. Reference measurement procedures should be of precise and the analytical principle of measurement applied should ensure reliability. We should be prepared to establish a quality management system and proficiency testing in clinical laboratories. PMID:12806918

  1. Mice examined in Animal Laboratory of Lunar Receiving Laboratory

    NASA Technical Reports Server (NTRS)

    1969-01-01

    Landrum Young (seated), Brown and Root-Northrup, and Russell Stullken, Manned Spacecraft Center, examine mice in the Animal laboratory of the Lunar Receiving Laboratory which have been inoculated with lunar sample material. wish for peace for all mankind. astronauts will be released from quarantine on August 11, 1969. Donald K. Slayton (right), MSC Director of Flight Crew Operations; and Lloyd Reeder, training coordinator.

  2. 75 FR 80011 - Good Laboratory Practice for Nonclinical Laboratory Studies

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-21

    ..., 1978 (43 FR 60013). As stated in its scope (Sec. 58.1), this regulation prescribes good laboratory... regulation in 1978. For example, it is presently common for nonclinical laboratory studies to be conducted... ensuring the integrity of resulting data. FDA is considering whether to include in the regulations a...

  3. Wentworth Institute Mechanical Engineering Laboratory Manual. Laboratory Study Guide.

    ERIC Educational Resources Information Center

    Avakian, Harry; And Others

    This publication is a laboratory study guide designed for mechanical engineering students. All of the experiments (with the exception of experiment No. 1) contained in the Mechanical Engineering Laboratory Manual have been included in this guide. Brief theoretical backgrounds, examples and their solutions, charts, graphs, illustrations, and…

  4. Alternative Fuels Research Laboratory

    NASA Technical Reports Server (NTRS)

    Surgenor, Angela D.; Klettlinger, Jennifer L.; Nakley, Leah M.; Yen, Chia H.

    2012-01-01

    NASA Glenn has invested over $1.5 million in engineering, and infrastructure upgrades to renovate an existing test facility at the NASA Glenn Research Center (GRC), which is now being used as an Alternative Fuels Laboratory. Facility systems have demonstrated reliability and consistency for continuous and safe operations in Fischer-Tropsch (F-T) synthesis and thermal stability testing. This effort is supported by the NASA Fundamental Aeronautics Subsonic Fixed Wing project. The purpose of this test facility is to conduct bench scale F-T catalyst screening experiments. These experiments require the use of a synthesis gas feedstock, which will enable the investigation of F-T reaction kinetics, product yields and hydrocarbon distributions. Currently the facility has the capability of performing three simultaneous reactor screening tests, along with a fourth fixed-bed reactor for catalyst activation studies. Product gas composition and performance data can be continuously obtained with an automated gas sampling system, which directly connects the reactors to a micro-gas chromatograph (micro GC). Liquid and molten product samples are collected intermittently and are analyzed by injecting as a diluted sample into designated gas chromatograph units. The test facility also has the capability of performing thermal stability experiments of alternative aviation fuels with the use of a Hot Liquid Process Simulator (HLPS) (Ref. 1) in accordance to ASTM D 3241 "Thermal Oxidation Stability of Aviation Fuels" (JFTOT method) (Ref. 2). An Ellipsometer will be used to study fuel fouling thicknesses on heated tubes from the HLPS experiments. A detailed overview of the test facility systems and capabilities are described in this paper.

  5. Laboratory diagnosis of thalassemia.

    PubMed

    Brancaleoni, V; Di Pierro, E; Motta, I; Cappellini, M D

    2016-05-01

    The thalassemias can be defined as α- or β-thalassemias depending on the defective globin chain and on the underlying molecular defects. The recognition of carriers is possible by hematological tests. Both α- and β-thalassemia carriers (heterozygotes) present with microcytic hypochromic parameters with or without mild anemia. Red cell indices and morphology followed by separation and measurement of Hb fractions are the basis for identification of carriers. In addition, iron status should be ascertained by ferritin or zinc protoporphyrin measurements and the iron/total iron-binding capacity/saturation index. Mean corpuscular volume and mean corpuscular hemoglobin are markedly reduced (mean corpuscular volume: 60-70 fl; MCH: 19-23 pg) in β-thalassemia carriers, whereas a slight to relevant reduction is usually observed in α-carriers. HbA2 determination is the most decisive test for β-carrier detection although it can be disturbed by the presence of δ-thalassemia defects. In α-thalassemia, HbA2 can be lower than normal and it assumes significant value when iron deficiency is excluded. Several algorithms have been introduced to discriminate from thalassemia carriers and subjects with iron-deficient anemia; because the only discriminating parameter is the red cell counts, these formulas must be used consciously. Molecular analysis is not required to confirm the diagnosis of β-carrier, but it is necessary to confirm the α-thalassemia carrier status. The molecular diagnosis is essential to predict severe transfusion-dependent and intermediate-to-mild non-transfusion-dependent cases. DNA analysis on chorionic villi is the approach for prenatal diagnosis and the methods are the same used for mutations detection, according to the laboratory facilities and expertise. PMID:27183541

  6. Laboratory singing sand avalanches.

    PubMed

    Dagois-Bohy, Simon; Ngo, Sandrine; du Pont, Sylvain Courrech; Douady, Stéphane

    2010-02-01

    Some desert sand dunes have the peculiar ability to emit a loud sound up to 110 dB, with a well-defined frequency: this phenomenon, known since early travelers (Darwin, Marco Polo, etc.), has been called the song of dunes. But only in late 19th century scientific observations were made, showing three important characteristics of singing dunes: first, not all dunes sing, but all the singing dunes are composed of dry and well-sorted sand; second, this sound occurs spontaneously during avalanches on a slip face; third this is not the only way to produce sound with this sand. More recent field observations have shown that during avalanches, the sound frequency does not depend on the dune size or shape, but on the grain diameter only, and scales as the square root of g/d--with g the gravity and d the diameter of the grains--explaining why all the singing dunes in the same vicinity sing at the same frequency. We have been able to reproduce these singing avalanches in laboratory on a hard plate, which made possible to study them more accurately than on the field. Signals of accelerometers at the flowing surface of the avalanche are compared to signals of microphones placed above, and it evidences a very strong vibration of the flowing layer at the same frequency as on the field, responsible for the emission of sound. Moreover, other characteristics of the booming dunes are reproduced and analyzed, such as a threshold under which no sound is produced, or beats in the sound that appears when the flow is too large. Finally, the size of the coherence zones emitting sound has been measured and discussed.

  7. Laboratory for Radiokrypton Dating

    NASA Astrophysics Data System (ADS)

    Zappala, J. C.; Jiang, W.; Bailey, K. G.; Lu, Z. T.; Mueller, P.; O'Connor, T. P.

    2015-12-01

    Due to its simple production and transport in the terrestrial environment, 81Kr (half-life = 230,000 yr) is the ideal tracer for old water and ice with mean residence times in the range of 105-106 years, a range beyond the reach of 14C. 81Kr-dating is now available to the earth science community at large thanks to the development of an efficient and selective atom counter based on the Atom Trap Trace Analysis (ATTA) method. ATTA is a laser-based atom counting method where individual neutral atoms of the desired isotope are selectively captured by laser beams, and their fluorescence detected via a CCD camera. ATTA is unique among trace analysis techniques in that it is free of interferences from any other isotopes, isobars, atomic or molecular species. The ATTA instrument at Argonne's Laboratory for Radiokrypton Dating is capable of measuring both 81Kr/Kr and 85Kr/Kr ratios of environmental samples in the range of 10-14-10-10. For 81Kr-dating in the age range of 150 kyr - 1500 kyr, the required sample size is 5 micro-L STP of krypton gas, which can be extracted from approximately 100 kg of water or 40 kg of ice. For 85Kr/Kr analysis, the sample size can be smaller by an order of magnitude. We are continually developing the method towards higher counting efficiency, smaller sample sizes requirements, and higher sample throughput rates. In the past four years, we have performed radiokrypton analysis of over 150 groundwater and ice samples extracted by collaborators from all seven continents. Sample collection and purification was performed by groups including the University of Chicago, the University of Illinois at Chicago, the University of Bern, and the International Atomic Energy Agency. This work is supported by the U.S. DOE, Office of Nuclear Physics, under contract DE-AC02-06CH11357.

  8. Teaching laboratory neuroscience at bowdoin: the laboratory instructor perspective.

    PubMed

    Hauptman, Stephen; Curtis, Nancy

    2009-01-01

    Bowdoin College is a small liberal arts college that offers a comprehensive Neuroscience major. The laboratory experience is an integral part of the major, and many students progress through three stages. A core course offers a survey of concepts and techniques. Four upper-level courses function to give students more intensive laboratory research experience in neurophysiology, molecular neurobiology, social behavior, and learning and memory. Finally, many majors choose to work in the individual research labs of the Neuroscience faculty. We, as laboratory instructors, are vital to the process, and are actively involved in all aspects of the lab-based courses. We provide student instruction in state of the art techniques in neuroscience research. By sharing laboratory teaching responsibilities with course professors, we help to prepare students for careers in laboratory neuroscience and also support and facilitate faculty research programs.

  9. Laboratory volcano geodesy

    NASA Astrophysics Data System (ADS)

    Færøvik Johannessen, Rikke; Galland, Olivier; Mair, Karen

    2014-05-01

    Magma transport in volcanic plumbing systems induces surface deformation, which can be monitored by geodetic techniques, such as GPS and InSAR. These geodetic signals are commonly analyzed through geodetic models in order to constrain the shape of, and the pressure in, magma plumbing systems. These models, however, suffer critical limitations: (1) the modelled magma conduit shapes cannot be compared with the real conduits, so the geodetic models cannot be tested nor validated; (2) the modelled conduits only exhibit shapes that are too simplistic; (3) most geodetic models only account for elasticity of the host rock, whereas substantial plastic deformation is known to occur. To overcome these limitations, one needs to use a physical system, in which (1) both surface deformation and the shape of, and pressure in, the underlying conduit are known, and (2) the mechanical properties of the host material are controlled and well known. In this contribution, we present novel quantitative laboratory results of shallow magma emplacement. Fine-grained silica flour represents the brittle crust, and low viscosity vegetable oil is an analogue for the magma. The melting temperature of the oil is 31°C; the oil solidifies in the models after the end of the experiments. At the time of injection the oil temperature is 50°C. The oil is pumped from a reservoir using a volumetric pump into the silica flour through a circular inlet at the bottom of a 40x40 cm square box. The silica flour is cohesive, such that oil intrudes it by fracturing it, and produces typical sheet intrusions (dykes, cone sheets, etc.). During oil intrusion, the model surface deforms, mostly by doming. These movements are measured by an advanced photogrammetry method, which uses 4 synchronized fixed cameras that periodically image the surface of the model from different angles. We apply particle tracking method to compute the 3D ground deformation pattern through time. After solidification of the oil, the

  10. Australia's marine virtual laboratory

    NASA Astrophysics Data System (ADS)

    Proctor, Roger; Gillibrand, Philip; Oke, Peter; Rosebrock, Uwe

    2014-05-01

    In all modelling studies of realistic scenarios, a researcher has to go through a number of steps to set up a model in order to produce a model simulation of value. The steps are generally the same, independent of the modelling system chosen. These steps include determining the time and space scales and processes of the required simulation; obtaining data for the initial set up and for input during the simulation time; obtaining observation data for validation or data assimilation; implementing scripts to run the simulation(s); and running utilities or custom-built software to extract results. These steps are time consuming and resource hungry, and have to be done every time irrespective of the simulation - the more complex the processes, the more effort is required to set up the simulation. The Australian Marine Virtual Laboratory (MARVL) is a new development in modelling frameworks for researchers in Australia. MARVL uses the TRIKE framework, a java-based control system developed by CSIRO that allows a non-specialist user configure and run a model, to automate many of the modelling preparation steps needed to bring the researcher faster to the stage of simulation and analysis. The tool is seen as enhancing the efficiency of researchers and marine managers, and is being considered as an educational aid in teaching. In MARVL we are developing a web-based open source application which provides a number of model choices and provides search and recovery of relevant observations, allowing researchers to: a) efficiently configure a range of different community ocean and wave models for any region, for any historical time period, with model specifications of their choice, through a user-friendly web application, b) access data sets to force a model and nest a model into, c) discover and assemble ocean observations from the Australian Ocean Data Network (AODN, http://portal.aodn.org.au/webportal/) in a format that is suitable for model evaluation or data assimilation, and

  11. Medical Laboratory Assistant. Student's Manual.

    ERIC Educational Resources Information Center

    Barnett, Sara

    This student's manual for the medical laboratory student is one of a series of self-contained, individualized instructional materials for students enrolled in training within the allied health field. It is intended to provide study materials and learning activities that are general enough for all medical laboratory students to use to enhance their…

  12. Laboratory Manual, Electrical Engineering 25.

    ERIC Educational Resources Information Center

    Syracuse Univ., NY. Dept. of Electrical Engineering.

    Developed as part of a series of materials in the electrical engineering sequence developed under contract with the United States Office of Education, this laboratory manual provides nine laboratory projects suitable for a second course in electrical engineering. Dealing with resonant circuits, electrostatic fields, magnetic devices, and…

  13. Laboratory Activities for Introductory Astronomy

    ERIC Educational Resources Information Center

    Kruglak, Haym

    1973-01-01

    Presents sample laboratory activities designed for use in astronomy teaching, including naked eye observations, instrument construction, student projects, and cloudy weather activities. Appended are bibliographies of journal articles and reference books and lists of films, laboratory manuals, and distributors of apparatus and teaching aids. (CC)

  14. Whole Class Laboratories: More Examples

    ERIC Educational Resources Information Center

    Kouh, Minjoon

    2016-01-01

    Typically, introductory physics courses are taught with a combination of lectures and laboratories in which students have opportunities to discover the natural laws through hands-on activities in small groups. This article reports the use of Google Drive, a free online document-sharing tool, in physics laboratories for pooling experimental data…

  15. Testing in the Language Laboratory.

    ERIC Educational Resources Information Center

    Irving, Evelyn Uhrhan

    General guidelines for test preparation and use of the language laboratory are developed in this paper. Comparisons between written tests and oral language laboratory tests underscore the importance of clarity in test item preparation. This study examines: (1) test construction, (2) types of questions, (3) test administration, (4) test scoring,…

  16. LABORATORY DESIGN CONSIDERATIONS FOR SAFETY.

    ERIC Educational Resources Information Center

    National Safety Council, Chicago, IL. Campus Safety Association.

    THIS SET OF CONSIDERATIONS HAS BEEN PREPARED TO PROVIDE PERSONS WORKING ON THE DESIGN OF NEW OR REMODELED LABORATORY FACILITIES WITH A SUITABLE REFERENCE GUIDE TO DESIGN SAFETY. THERE IS NO DISTINCTION BETWEEN TYPES OF LABORATORY AND THE EMPHASIS IS ON GIVING GUIDES AND ALTERNATIVES RATHER THAN DETAILED SPECIFICATIONS. AREAS COVERED INCLUDE--(1)…

  17. Boltzmann's constant: A laboratory experiment

    NASA Astrophysics Data System (ADS)

    Kruglak, Haym

    1989-03-01

    The mean-square displacement of a latex microsphere is determined from its projection on a TV monitor. The distribution of displacement is shown to be Gaussian. Boltzmann's constant, calculated from the pooled data of several observers, is in excellent agreement with the accepted value. The experiment is designed for one laboratory period in the advanced undergraduate laboratory.

  18. OCCUPATION--LANGUAGE LABORATORY DIRECTOR.

    ERIC Educational Resources Information Center

    TURNER, DAYMOND

    TRUE PROFESSIONAL STATUS FOR A LABORATORY DIRECTOR, PLUS ADMINISTRATIVE SUPPORT OF SUCH INSTRUCTION, WILL GIVE COLLEGES AND UNIVERSITIES ADEQUATE RETURN FOR THEIR INVESTMENT IN ELECTRONIC EQUIPMENT. BY BEING INVOLVED IN IMPORTANT RESEARCH AND INSTRUCTIONAL ACTIVITIES, THE DIRECTOR OF A LANGUAGE LABORATORY CAN SERVE ALSO TO FREE THE TEACHER AND…

  19. A laboratory animal science pioneer.

    PubMed

    Kostomitsopoulos, Nikolaos

    2014-11-01

    Nikolaos Kostomitsopoulos, DVM, PhD, is Head of Laboratory Animal Facilities and Designated Veterinarian, Center of Clinical, Experimental Surgery and Translational Research, Biomedical Research Foundation of the Academy of Athens, Athens, Greece. Dr. Kostomitsopoulos discusses his successes in implementing laboratory animal science legislation and fostering collaboration among scientists in Greece.

  20. Dental Laboratory Technology Program Guide.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Dept. of Vocational Education.

    This program guide contains the standard dental laboratory technology curriculum for both diploma programs and associate degree programs in technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the dental laboratory technology field. The general information section contains the…

  1. Three Puzzles for Organic Laboratory.

    ERIC Educational Resources Information Center

    Todd, David; Pickering, Miles

    1988-01-01

    Notes that laboratory work should be more oriented towards puzzle solving rather than technique or illustration. Offers three organic laboratory puzzles which can be solved by melting point alone. Involves lab work at the 100-200-mg scale but still uses conventional glassware. (MVL)

  2. Pollution prevention in laboratory operations

    SciTech Connect

    Phifer, R.W.

    1995-09-01

    The scale of chemical usage has the most significant impact on pollution prevention efforts in the laboratory. The average chemical laboratory facility, particularly one involved in the academic or industrial research area, uses thousands of chemicals. Instead of a few chemicals in significant quantities, laboratories use many chemicals in small quantities. This results in both unique problems and unique solutions for those involved in any aspect of pollution prevention. The Occupational Safety and Health Administration (OSHA) defines a laboratory as a workplace where relatively small quantities of hazardous chemicals are used on a non-production basis. This includes facilities for teaching, quality control, environmental testing, chemical and medical research and development, and clinical testing. As in other facilities that use chemicals, pollution prevention in the laboratory means source reduction, waste minimization, recycling, and reclamation. Nonetheless, how these procedures are implemented varies significantly from other chemical activities.

  3. Mars Science Laboratory Drill

    NASA Technical Reports Server (NTRS)

    Okon, Avi B.; Brown, Kyle M.; McGrath, Paul L.; Klein, Kerry J.; Cady, Ian W.; Lin, Justin Y.; Ramirez, Frank E.; Haberland, Matt

    2012-01-01

    This drill (see Figure 1) is the primary sample acquisition element of the Mars Science Laboratory (MSL) that collects powdered samples from various types of rock (from clays to massive basalts) at depths up to 50 mm below the surface. A rotary-percussive sample acquisition device was developed with an emphasis on toughness and robustness to handle the harsh environment on Mars. It is the first rover-based sample acquisition device to be flight-qualified (see Figure 2). This drill features an autonomous tool change-out on a mobile robot, and novel voice-coil-based percussion. The drill comprises seven subelements. Starting at the end of the drill, there is a bit assembly that cuts the rock and collects the sample. Supporting the bit is a subassembly comprising a chuck mechanism to engage and release the new and worn bits, respectively, and a spindle mechanism to rotate the bit. Just aft of that is a percussion mechanism, which generates hammer blows to break the rock and create the dynamic environment used to flow the powdered sample. These components are mounted to a translation mechanism, which provides linear motion and senses weight-on-bit with a force sensor. There is a passive-contact sensor/stabilizer mechanism that secures the drill fs position on the rock surface, and flex harness management hardware to provide the power and signals to the translating components. The drill housing serves as the primary structure of the turret, to which the additional tools and instruments are attached. The drill bit assembly (DBA) is a passive device that is rotated and hammered in order to cut rock (i.e. science targets) and collect the cuttings (powder) in a sample chamber until ready for transfer to the CHIMRA (Collection and Handling for Interior Martian Rock Analysis). The DBA consists of a 5/8-in. (.1.6- cm) commercial hammer drill bit whose shank has been turned down and machined with deep flutes designed for aggressive cutting removal. Surrounding the shank of the

  4. Making Laboratories Count -- Better Integration of Laboratories in Physics Courses

    NASA Astrophysics Data System (ADS)

    Sizemore, Jim

    2011-10-01

    The quality of K-12 education leaves something to be desired and presents higher education faculty with the challenge of instructing under-prepared students. However, by their own admission, students from many institutions inform us that laboratory sections in science classes, including physics, consist mostly of showing up, going through the motions, and getting grades that boost their overall grade. This work presents laboratories that challenge students to take their laboratory work more seriously including specific rubrics enforcing SOLVE and Bloom's Taxonomy, pre-lab preparation work, and quizzes on pre-lab preparation. Early results are encouraging revealing greater student progress with better integration of laboratory with the rest of a complete physics course.

  5. OSHA Laboratory Standard: Driving Force for Laboratory Safety!

    ERIC Educational Resources Information Center

    Roy, Kenneth R.

    2000-01-01

    Discusses the Occupational Safety and Health Administration's (OSHA's) Laboratory Safety Standards as the major driving force in establishing and maintaining a safe working environment for teachers and students. (Author)

  6. Inter-laboratory comparison measurements of radiochemical laboratories in Slovakia.

    PubMed

    Meresová, J; Belanová, A; Vrsková, M

    2010-01-01

    The first inter-laboratory comparison organized by the radiochemistry laboratory of Water Research Institute (WRI) in Bratislava was carried out in 1993 and since then is it realized on an annual basis and about 10 radiochemical laboratories from all over Slovakia are participating. The gross alpha and gross beta activities, and the activity concentrations of (222)Rn, tritium, and (226)Ra, and U(nat) concentration in synthetic water samples are compared. The distributed samples are covering the concentration range prevailing in potable and surface waters and are prepared by dilution of certified reference materials. Over the course of the years 1993-2008, we observed the improvement in the quality of results for most of the laboratories. However, the success rate of the gross alpha determination activity is not improving as much as the other parameters.

  7. Safety in the Chemical Laboratory. Safety in the Analytical Laboratory.

    ERIC Educational Resources Information Center

    Ewing, Galen W.

    1990-01-01

    Safety issues specifically related to the analytical laboratory are discussed including hazardous reagents, transferring samples, cleaning apparatus, eye protection, and equipment damage. Special attention is given to techniques which not only endanger the technician but also endanger expensive equipment. (CW)

  8. Clinical laboratory accreditation in India.

    PubMed

    Handoo, Anil; Sood, Swaroop Krishan

    2012-06-01

    Test results from clinical laboratories must ensure accuracy, as these are crucial in several areas of health care. It is necessary that the laboratory implements quality assurance to achieve this goal. The implementation of quality should be audited by independent bodies,referred to as accreditation bodies. Accreditation is a third-party attestation by an authoritative body, which certifies that the applicant laboratory meets quality requirements of accreditation body and has demonstrated its competence to carry out specific tasks. Although in most of the countries,accreditation is mandatory, in India it is voluntary. The quality requirements are described in standards developed by many accreditation organizations. The internationally acceptable standard for clinical laboratories is ISO15189, which is based on ISO/IEC standard 17025. The accreditation body in India is the National Accreditation Board for Testing and Calibration Laboratories, which has signed Mutual Recognition Agreement with the regional cooperation the Asia Pacific Laboratory Accreditation Cooperation and with the apex cooperation the International Laboratory Accreditation Cooperation. PMID:22727005

  9. Laboratory reengineering facilitates cost management.

    PubMed

    Ellis, J E; Moser, L H

    1998-08-01

    In 1993, The Medical University of South Carolina (MUSC) in Charleston undertook a change management initiative to achieve a more cost-competitive position in its market and become a more attractive partner for a possible future affiliation with another provider organization. A key element of this change process was a reorganization of the medical center's laboratory department. Through consolidation of MUSC's separate laboratories and the introduction of a new, more efficient chemistry analyzer system, the medical center realized annual laboratory savings of approximately $1.3 million.

  10. Microwave remote sensing laboratory design

    NASA Technical Reports Server (NTRS)

    Friedman, E.

    1979-01-01

    Application of active and passive microwave remote sensing to the study of ocean pollution is discussed. Previous research efforts, both in the field and in the laboratory were surveyed to derive guidance for the design of a laboratory program of research. The essential issues include: choice of radar or radiometry as the observational technique; choice of laboratory or field as the research site; choice of operating frequency; tank sizes and material; techniques for wave generation and appropriate wavelength spectrum; methods for controlling and disposing of pollutants used in the research; and pollutants other than oil which could or should be studied.

  11. Issues for laboratory outreach programs.

    PubMed

    1994-01-01

    As we saw in the last "As We See It," many hospitals have begun outreach programs. We explored why outreach programs are established, the steps needed to develop a program, and the way to establish the proper business culture in a hospital laboratory for running a successful program. In this issue we identify the new skills laboratory managers need to be outreach managers, show how some programs maintain a competitive advantage, and explain some of the effects health-care reform will have on outreach services, as we ask: What are the requirements and issues involved in operating a successful laboratory outreach program?

  12. Mars Science Laboratory at Sunset

    NASA Technical Reports Server (NTRS)

    2003-01-01

    December 2, 2003

    Sunset on Mars catches NASA's Mars Science Laboratory in the foreground in this artist's concept. The mission is under development for launch in 2009 and a precision landing on Mars in 2010.

    Once on the ground, the Mars Science Laboratory would analyze dozens of samples scooped up from the soil and cored from rocks as it explores with greater range than any previous Mars rover. It would investigate the past or present ability of Mars to support life. NASA is considering nuclear energy for powering the rover to give it a long operating lifespan.

    NASA's Jet Propulsion Laboratory, Pasadena, Calif., is managing development of the Mars Smart Laboratory for the NASA Office of Space Science, Washington, D.C.

  13. Mars Science Laboratory at Canyon

    NASA Technical Reports Server (NTRS)

    2003-01-01

    December 2, 2003

    NASA's Mars Science Laboratory travels near a canyon on Mars in this artist's concept. The mission is under development for launch in 2009 and a precision landing on Mars in 2010.

    Once on the ground, the Mars Science Laboratory would analyze dozens of samples scooped up from the soil and cored from rocks as it explores with greater range than any previous Mars rover. It would investigate the past or present ability of Mars to support life. NASA is considering nuclear energy for powering the rover to give it a long operating lifespan.

    NASA's Jet Propulsion Laboratory, Pasadena, Calif., is managing development of the Mars Smart Laboratory for the NASA Office of Space Science, Washington, D.C.

  14. Condensed Laboratory Experiences for Nonmajors

    ERIC Educational Resources Information Center

    Thorne, James M.

    1975-01-01

    Describes the use of laboratory experiments termed hands-on demonstrations that are designed to reinforce the concepts covered in lecture with emphasis on maximizing the sense content (sight, smell, hearing) to improve retention by the student. (GS)

  15. A Combustion Laboratory for Undergraduates.

    ERIC Educational Resources Information Center

    Peters, James E.

    1985-01-01

    Describes a combustion laboratory facility and experiments for a senior-level (undergraduate) course in mechanical engineering. The experiment reinforces basic thermodynamic concepts and provides many students with their first opportunity to work with a combustion system. (DH)

  16. NASA Dryden Flight Loads Laboratory

    NASA Technical Reports Server (NTRS)

    Horn, Tom

    2008-01-01

    This viewgraph presentation reviews the work of the Dryden Flight Loads Laboratory. The capabilities and research interests of the lab are: Structural, thermal, & dynamic analysis; Structural, thermal, & dynamic ground-test techniques; Advanced structural instrumentation; and Flight test support.

  17. Laboratory Techniques for the Blind

    ERIC Educational Resources Information Center

    Tombaugh, Dorothy

    1972-01-01

    Describes modifications of laboratory procedures for the BSCS Green Version biology, including dissection, microbiology, animal behavior, physiology, biochemistry, and genetics that make the methods suitable for direct experimentation by blind students. Discusses models as substitutes for microscopy. (AL)

  18. National Water Quality Laboratory Profile

    USGS Publications Warehouse

    Raese, Jon W.

    1994-01-01

    The National Water Quality Laboratory determines organic and inorganic constituents in samples of surface and ground water, river and lake sediment, aquatic plant and animal material, and precipitation collected throughout the United States and its territories by the U.S. Geological Survey. In water year 1994, the Laboratory produced more than 900,000 analytical results for about 65,000 samples. The Laboratory also coordinates an extensive network of contract laboratories for the determination of radiochemical and stable isotopes and work for the U.S. Department of Defense Environmental Contamination Hydrology Program. Heightened concerns about water quality and about the possible effects of toxic chemicals at trace and ultratrace levels have contributed to an increased demand for impartial, objective, and independent data.

  19. LABCON - Laboratory Job Control program

    NASA Technical Reports Server (NTRS)

    Reams, L. T.

    1969-01-01

    Computer program LABCON controls the budget system in a component test laboratory whose workload is made up from many individual budget allocations. A common denominator is applied to an incoming job, to which all effort is charged and accounted for.

  20. Laboratory directed research and development

    SciTech Connect

    Not Available

    1991-11-15

    The purposes of Argonne's Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel concepts, enhance the Laboratory's R D capabilities, and further the development of its strategic initiatives. Among the aims of the projects supported by the Program are establishment of engineering proof-of-principle''; development of an instrumental prototype, method, or system; or discovery in fundamental science. Several of these project are closely associated with major strategic thrusts of the Laboratory as described in Argonne's Five Year Institutional Plan, although the scientific implications of the achieved results extend well beyond Laboratory plans and objectives. The projects supported by the Program are distributed across the major programmatic areas at Argonne. Areas of emphasis are (1) advanced accelerator and detector technology, (2) x-ray techniques in biological and physical sciences, (3) advanced reactor technology, (4) materials science, computational science, biological sciences and environmental sciences. Individual reports summarizing the purpose, approach, and results of projects are presented.

  1. Commissioning a materials research laboratory

    SciTech Connect

    SAVAGE,GERALD A.

    2000-03-28

    This presentation covers the process of commissioning a new 150,000 sq. ft. research facility at Sandia National Laboratories. The laboratory being constructed is a showcase of modern design methods being built at a construction cost of less than $180 per sq. ft. This is possible in part because of the total commissioning activities that are being utilized for this project. The laboratory's unique approach to commissioning will be presented in this paper. The process will be followed through from the conceptual stage on into the actual construction portion of the laboratory. Lessons learned and cost effectiveness will be presented in a manner that will be usable for others making commissioning related decisions. Commissioning activities at every stage of the design will be presented along with the attributed benefits. Attendees will hear answers to the what, when, who, and why questions associated with commissioning of this exciting project.

  2. Contact Lenses in the Laboratory.

    ERIC Educational Resources Information Center

    Kingston, David W.

    1981-01-01

    Summarizes results of a three-item questionnaire returned by 43 Michigan institutions expressing views on wearing contact lenses in chemical laboratories. Questions focused on eye protection, type of protection, and use of contact lenses. (SK)

  3. Laboratory Workhorse: The Analytical Balance.

    ERIC Educational Resources Information Center

    Clark, Douglas W.

    1979-01-01

    This report explains the importance of various analytical balances in the water or wastewater laboratory. Stressed is the proper procedure for utilizing the equipment as well as the mechanics involved in its operation. (CS)

  4. Practical Interfacing in the Laboratory

    NASA Astrophysics Data System (ADS)

    Derenzo, Stephen E.

    2003-05-01

    This text describes in practical terms how to use a desk-top computer to monitor and control laboratory experiments. The author clearly explains how to design electronic circuits and write computer programs to sense, analyse and display real-world quantities, including displacement, temperature, force, sound, light, and biomedical potentials. The book includes numerous laboratory exercises and appendices that provide practical information on microcomputer architecture and interfacing, including complete circuit diagrams and component lists. Topics include analog amplification and signal processing, digital-to-analog and analog-to-digital conversion, electronic sensors and actuators, digital and analog interfacing circuits, and programming. Only a very basic knowledge of electronics is assumed, making it ideal for college-level laboratory courses and for practising engineers and scientists. Everything you need to know about using a PC to monitor and control laboratory experiments Full of practical circuit designs and C-code examples Ideal for students and practising scientists

  5. [Quality management in medical laboratories].

    PubMed

    Fritzer-Szekeres, M

    2010-05-01

    During the 20th century understanding for quality has changed and international and national requirements for quality have been published. Therefore also medical branches started to establish quality management systems. Quality assurance has always been important for medical laboratories. Certification according to the standard ISO 9001 and accreditation according to the standard ISO 17025 have been the proof of fulfilling quality requirements. The relatively new standard ISO 15189 is the first standard for medical laboratories. This standard includes technical and management requirements for the medical laboratory. The main focus is the proof of competence within the personnel. As this standard is accepted throughout the European Union an increase in accreditations of medical laboratories is predictable. PMID:20454753

  6. Extending the Marine Microcosm Laboratory

    ERIC Educational Resources Information Center

    Ryswyk, Hal Van; Hall, Eric W.; Petesch, Steven J.; Wiedeman, Alice E.

    2007-01-01

    The traditional range of marine microcosm laboratory experiments is presented as an ideal environment to teach the entire analysis process. The microcosm lab provides student-centered approach with opportunities for collaborative learning and to develop critical communication skills.

  7. A Laboratory Investigation of Groupthink.

    ERIC Educational Resources Information Center

    Courtright, John A.

    1978-01-01

    Examines the groupthink phenomenon under controlled, laboratory conditions. Results indicate that the presence or absence of disagreement (conflict, hostility) among members may be the best discriminator between groupthink and nongroupthink groups. (JMF)

  8. Los Alamos National Laboratory Overview

    SciTech Connect

    Neu, Mary

    2010-06-02

    Mary Neu, Associate Director for Chemistry, Life and Earth Sciences at Los Alamos National Laboratory, delivers opening remarks at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM

  9. Gallium Safety in the Laboratory

    SciTech Connect

    Lee C. Cadwallader

    2003-06-01

    A university laboratory experiment for the US Department of Energy magnetic fusion research program required a simulant for liquid lithium. The simulant choices were narrowed to liquid gallium and galinstan (Ga-In-Sn) alloy. Safety information on liquid gallium and galinstan were compiled, and the choice was made to use galinstan. A laboratory safety walkthrough was performed in the fall of 2002 to support the galinstan experiment. The experiment has been operating successfully since early 2002.

  10. Gallium Safety in the Laboratory

    SciTech Connect

    Cadwallader, L.C.

    2003-05-07

    A university laboratory experiment for the US Department of Energy magnetic fusion research program required a simulant for liquid lithium. The simulant choices were narrowed to liquid gallium and galinstan (Ga-In-Sn) alloy. Safety information on liquid gallium and galinstan were compiled, and the choice was made to use galinstan. A laboratory safety walkthrough was performed in the fall of 2002 to support the galinstan experiment. The experiment has been operating successfully since early 2002.

  11. Phoenix's Wet Chemistry Laboratory Units

    NASA Technical Reports Server (NTRS)

    2008-01-01

    This image shows four Wet Chemistry Laboratory units, part of the Microscopy, Electrochemistry, and Conductivity Analyzer (MECA) instrument on board NASA's Phoenix Mars Lander. This image was taken before Phoenix's launch on August 4, 2007.

    The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  12. [Errors in laboratory daily practice].

    PubMed

    Larrose, C; Le Carrer, D

    2007-01-01

    Legislation set by GBEA (Guide de bonne exécution des analyses) requires that, before performing analysis, the laboratory directors have to check both the nature of the samples and the patients identity. The data processing of requisition forms, which identifies key errors, was established in 2000 and in 2002 by the specialized biochemistry laboratory, also with the contribution of the reception centre for biological samples. The laboratories follow a strict criteria of defining acceptability as a starting point for the reception to then check requisition forms and biological samples. All errors are logged into the laboratory database and analysis report are sent to the care unit specifying the problems and the consequences they have on the analysis. The data is then assessed by the laboratory directors to produce monthly or annual statistical reports. This indicates the number of errors, which are then indexed to patient files to reveal the specific problem areas, therefore allowing the laboratory directors to teach the nurses and enable corrective action.

  13. 15 CFR 280.103 - Laboratory accreditation.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Laboratory accreditation. 280.103... QUALITY Petitions, Affirmations, and Laboratory Accreditation § 280.103 Laboratory accreditation. A laboratory may be accredited by any laboratory accreditation program that may be established by any entity...

  14. 27 CFR 22.108 - Other laboratories.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Other laboratories. 22.108... Other laboratories. Laboratories, other than pathological laboratories specified in § 22.107, may... products resulting from the use of tax-free alcohol shall be confined strictly to the laboratory...

  15. 42 CFR 493.1850 - Laboratory registry.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Laboratory registry. 493.1850 Section 493.1850... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Enforcement Procedures § 493.1850 Laboratory... laboratories, including the following: (1) A list of laboratories that have been convicted, under Federal...

  16. 42 CFR 493.1850 - Laboratory registry.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false Laboratory registry. 493.1850 Section 493.1850... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Enforcement Procedures § 493.1850 Laboratory... laboratories, including the following: (1) A list of laboratories that have been convicted, under Federal...

  17. 15 CFR 280.103 - Laboratory accreditation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Laboratory accreditation. 280.103... QUALITY Petitions, Affirmations, and Laboratory Accreditation § 280.103 Laboratory accreditation. A laboratory may be accredited by any laboratory accreditation program that may be established by any entity...

  18. 15 CFR 280.103 - Laboratory accreditation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Laboratory accreditation. 280.103... QUALITY Petitions, Affirmations, and Laboratory Accreditation § 280.103 Laboratory accreditation. A laboratory may be accredited by any laboratory accreditation program that may be established by any entity...

  19. 42 CFR 493.1850 - Laboratory registry.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 5 2014-10-01 2014-10-01 false Laboratory registry. 493.1850 Section 493.1850... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Enforcement Procedures § 493.1850 Laboratory... laboratories, including the following: (1) A list of laboratories that have been convicted, under Federal...

  20. 27 CFR 22.108 - Other laboratories.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Other laboratories. 22.108... Other laboratories. Laboratories, other than pathological laboratories specified in § 22.107, may... products resulting from the use of tax-free alcohol shall be confined strictly to the laboratory...

  1. 27 CFR 22.108 - Other laboratories.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Other laboratories. 22.108... Other laboratories. Laboratories, other than pathological laboratories specified in § 22.107, may... products resulting from the use of tax-free alcohol shall be confined strictly to the laboratory...

  2. 15 CFR 280.103 - Laboratory accreditation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Laboratory accreditation. 280.103... QUALITY Petitions, Affirmations, and Laboratory Accreditation § 280.103 Laboratory accreditation. A laboratory may be accredited by any laboratory accreditation program that may be established by any entity...

  3. 42 CFR 493.1850 - Laboratory registry.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 5 2013-10-01 2013-10-01 false Laboratory registry. 493.1850 Section 493.1850... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Enforcement Procedures § 493.1850 Laboratory... laboratories, including the following: (1) A list of laboratories that have been convicted, under Federal...

  4. 15 CFR 280.103 - Laboratory accreditation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Laboratory accreditation. 280.103... QUALITY Petitions, Affirmations, and Laboratory Accreditation § 280.103 Laboratory accreditation. A laboratory may be accredited by any laboratory accreditation program that may be established by any entity...

  5. 42 CFR 493.1850 - Laboratory registry.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 5 2012-10-01 2012-10-01 false Laboratory registry. 493.1850 Section 493.1850... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Enforcement Procedures § 493.1850 Laboratory... laboratories, including the following: (1) A list of laboratories that have been convicted, under Federal...

  6. 27 CFR 22.108 - Other laboratories.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Other laboratories. 22.108... Other laboratories. Laboratories, other than pathological laboratories specified in § 22.107, may... products resulting from the use of tax-free alcohol shall be confined strictly to the laboratory...

  7. 27 CFR 22.108 - Other laboratories.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Other laboratories. 22.108... Other laboratories. Laboratories, other than pathological laboratories specified in § 22.107, may... products resulting from the use of tax-free alcohol shall be confined strictly to the laboratory...

  8. Lawrence Livermore National Laboratory hot spot mobile laboratory

    SciTech Connect

    Buddemeier, B

    1999-08-27

    Gross alpha/beta/tritium liquid The Hot Spot Mobile Laboratory is an asset used to analyze samples (some high hazard) from the field. Field laboratories allow the quick turnaround of samples needed to establish weapon condition and hazard assessment for the protection of responders and the public. The Hot Spot Lab is configured to fly anywhere in the world and is staffed by expert scientists and technicians from Lawrence Livermore National Laboratory who perform similar functions in their routine jobs. The Hot Spot Team carries sample control kits to provide responding field teams with the procedures, tools, and equipment for sample collection and field measurements. High-hazard samples brought back from the field are prepared for analysis in HEPA-filtered gloveboxes staffed by technicians from LLNL's Plutonium Facility. The samples are passed on to the Mobile Laboratory which carries a variety of radiological and chemical analytical equipment in portable configuration for use in the field. Equipment and personnel can also deploy special assets to local hospitals or the field for detection of plutonium in a lung or wound. Quick assessment of personnel contamination is essential for time-critical medical intervention. In addition to pulling the trailer, the Hot Spot Truck also stores some of the equipment, consumables, and a PTO generator. The Hot Spot Laboratory has the capability to be self-sufficient for several weeks when deployed to determine Pu uptake.

  9. Commercialization of a DOE Laboratory

    SciTech Connect

    Stephenson, Barry A.

    2008-01-15

    On April 1, 1998, Materials and Chemistry Laboratory, Inc. (MCLinc) began business as an employee-owned, commercial, applied research laboratory offering services to both government and commercial clients. The laboratory had previously been a support laboratory to DoE's gaseous diffusion plant in Oak Ridge (K-25). When uranium enrichment was halted at the site, the laboratory was expanded to as an environmental demonstration center and served from 1992 until 1997 as a DOE Environmental User Facility. In 1997, after the laboratory was declared surplus, it was made available to the employee group who operated the laboratory for DOE as a government-owned, contractor-operated facility. This paper describes briefly the process of establishing the business. Attributes that contributed to the success of MCLinc are described. Some attention is given to lessons learned and to changes that could facilitate future attempts to make similar transitions. Lessons learnt: as with any business venture, operation over time has revealed that some actions taken by the laboratory founders have contributed to its successful operation while others were not so successful. Observations are offered in hopes that lessons learned may suggest actions that will facilitate future attempts to make similar transitions. First, the decision to vest significant ownership of the business in the core group of professionals operating the business is key to its success. Employee-owners of the laboratory have consistently provided a high level of service to its customers while conducting business in a cost-efficient manner. Secondly, an early decision to provide business support services in-house rather than purchasing them from support contractors on site have proven cost-effective. Laboratory employees do multiple tasks and perform overhead tasks in addition to their chargeable technical responsibilities. Thirdly, assessment of technical capabilities in view of market needs and a decision to offer these

  10. Interpretation of laboratory data and need for reference laboratories.

    PubMed

    Pengo, V; Denas, G; Banzato, A; Bison, E; Bracco, A; Visentin, M S; Hoxha, A; Ruffatti, A

    2012-06-01

    A single positive laboratory test among those exploring the presence of antiphospholipid antibodies is not associated with thromboembolic events and does not identify patients with antiphospholipid syndrome. On the other hand, more than one laboratory test positive, and in particular all three tests positive, is strongly associated to thromboembolic events and identifies high risk patients. Triple positivity is in fact related to the presence of a specific anti-β2-glycoprotein I (anti-Domain I) antibody, also able to prolong coagulation tests. Monoclonal antibodies against Domain I with Lupus Anticoagulant activity might be candidate material for standardization of antiphospholipid assays. Much work remains to be done in this field.

  11. An Atmospheric Cloud Physics Laboratory for the Space Laboratory

    NASA Technical Reports Server (NTRS)

    Smith, R.; Anderson, J.; Schrick, B.; Ellsworth, C.; Davis, M.

    1976-01-01

    Results of research and engineering analyses to date show that it is feasible to develop and fly on the first Spacelab mission a multipurpose laboratory in which experiments can be performed on the microphysical processes in atmospheric clouds. The paper presents a series of tables on the Atmospheric Cloud Physics Laboratory, with attention given to experiment classes, the preliminary equipment list (particle generators, optical and imaging devices, particle detectors and characterizers, etc.), initial equipment (scientific equipment subsystems and flight support subsystems), and scientific functional requirements (the expansion chamber, the continuous flow diffusion chamber, the static diffusion chamber, the humidifier, and particle generators).

  12. Radioactive Standards Laboratory ININ as a reference laboratory in Mexico.

    PubMed

    GarcíaDíaz, O; MartínezAyala, L; HerreraValadez, L; TovarM, V; Karam, L

    2016-03-01

    The Radioactive Standards Laboratory of the National Institute of Nuclear Research is the National reference laboratory for the measurement of radioactivity in Mexico. It has a gamma-ray spectrometry system with a high-purity Ge-detector for measurements from 50 keV to 2000 keV, and develops standardized radioactive (beta-particle and gamma-ray emitting) sources in different geometries with uncertainties less than or equal to 5% for applications such as the calibration of radionuclide calibrators (clinically used dose calibrators), Ge-detectors and NaI(Tl) detectors. PMID:27358942

  13. The Robotic Edge Finishing Laboratory

    SciTech Connect

    Loucks, C.S.; Selleck, C.B.

    1990-08-01

    The Robotic Edge Finishing Laboratory at Sandia National Laboratories is developing four areas of technology required for automated deburring, chamfering, and blending of machined edges: (1) the automatic programming of robot trajectories and deburring processes using information derived from a CAD database, (2) the use of machine vision for locating the workpiece coupled with force control to ensure proper tool contact, (3) robotic deburring, blending, and machining of precision chamfered edges, and (4) in-process automated inspection of the formed edge. The Laboratory, its components, integration, and results from edge finishing experiments to date are described here. Also included is a discussion of the issues regarding implementation of the technology in a production environment. 24 refs., 17 figs.

  14. Virtual Laboratories and Virtual Worlds

    NASA Astrophysics Data System (ADS)

    Hut, Piet

    2008-05-01

    Since we cannot put stars in a laboratory, astrophysicists had to wait till the invention of computers before becoming laboratory scientists. For half a century now, we have been conducting experiments in our virtual laboratories. However, we ourselves have remained behind the keyboard, with the screen of the monitor separating us from the world we are simulating. Recently, 3D on-line technology, developed first for games but now deployed in virtual worlds like Second Life, is beginning to make it possible for astrophysicists to enter their virtual labs themselves, in virtual form as avatars. This has several advantages, from new possibilities to explore the results of the simulations to a shared presence in a virtual lab with remote collaborators on different continents. I will report my experiences with the use of Qwaq Forums, a virtual world developed by a new company (see http://www.qwaq.com).

  15. Laboratory aspects of Lyme borreliosis.

    PubMed Central

    Barbour, A G

    1988-01-01

    Lyme borreliosis (Lyme disease), a common tick-borne disorder of people and domestic animals in North America and Europe, is caused by the spirochete Borrelia burgdorferi. Following the discovery and initial propagation of this agent in 1981 came revelations that other tick-associated infectious disorders are but different forms of Lyme borreliosis. A challenge for the clinician and microbiology laboratory is confirmation that a skin rash, a chronic meningitis, an episode of myocarditis, or an arthritic joint is the consequence of B. burgdorferi infection. The diagnosis of Lyme borreliosis may be established by (i) directly observing the spirochete in host fluid or tissue, (ii) recovering the etiologic spirochete from the patient in culture medium or indirectly through inoculation of laboratory animals, or (iii) carrying out serologic tests with the patient's serum or cerebrospinal fluid. The last method, while lacking in discriminatory power, is the most efficacious diagnostic assay for most laboratories at present. Images PMID:3069200

  16. Laboratory eating behavior in obesity.

    PubMed

    Laessle, Reinhold G; Lehrke, Sonja; Dückers, Sabine

    2007-09-01

    The eating behavior of 49 obese and 47 normal weight controls of both sexes was compared in laboratory. A universal eating monitor according to the Kissileff-instrument was used to obtain cumulative intake curves with chocolate pudding as laboratory food. Compared to controls the obese had a significantly higher initial eating rate (p<.002), larger spoonfuls (p<.005), and a greater total intake (p<.03) for the laboratory food. For initial eating rate a significant sex x weight interaction was found (p<.04). Higher values for males emerged only for overweight, but not for normal weight subjects. On the one hand, these data suggest an eating behavior of obese, which will promote a high energy intake in the natural environment. On the other hand, the observed differences can also be interpreted as a consequence of cognitive factors, impacting the eating behavior of obese under specific conditions.

  17. Los Alamos National Laboratory A National Science Laboratory

    SciTech Connect

    Chadwick, Mark B.

    2012-07-20

    Our mission as a DOE national security science laboratory is to develop and apply science, technology, and engineering solutions that: (1) Ensure the safety, security, and reliability of the US nuclear deterrent; (2) Protect against the nuclear threat; and (3) Solve Energy Security and other emerging national security challenges.

  18. Regional Educational Laboratories: History and Prospect. Laboratory Policy Paper.

    ERIC Educational Resources Information Center

    Guthrie, James

    Regional Educational Laboratories were created in the early 1960s as a federally funded link between research and development efforts in education and school districts. The labs were conceived to be sensitive to the practical needs of administrators and teachers for educational innovations that could be implemented locally. However, over a quarter…

  19. Exploration Laboratory Analysis FY13

    NASA Technical Reports Server (NTRS)

    Krihak, Michael; Perusek, Gail P.; Fung, Paul P.; Shaw, Tianna, L.

    2013-01-01

    The Exploration Laboratory Analysis (ELA) project supports the Exploration Medical Capability (ExMC) risk, which is stated as the Risk of Inability to Adequately Treat an Ill or Injured Crew Member, and ExMC Gap 4.05: Lack of minimally invasive in-flight laboratory capabilities with limited consumables required for diagnosing identified Exploration Medical Conditions. To mitigate this risk, the availability of inflight laboratory analysis instrumentation has been identified as an essential capability in future exploration missions. Mission architecture poses constraints on equipment and procedures that will be available to treat evidence-based medical conditions according to the Space Medicine Exploration Medical Conditions List (SMEMCL), and to perform human research studies on the International Space Station (ISS) that are supported by the Human Health and Countermeasures (HHC) element. Since there are significant similarities in the research and medical operational requirements, ELA hardware development has emerged as a joint effort between ExMC and HHC. In 2012, four significant accomplishments were achieved towards the development of exploration laboratory analysis for medical diagnostics. These achievements included (i) the development of high priority analytes for research and medical operations, (ii) the development of Level 1 functional requirements and concept of operations documentation, (iii) the selection and head-to-head competition of in-flight laboratory analysis instrumentation, and (iv) the phase one completion of the Small Business Innovation Research (SBIR) projects under the topic Smart Phone Driven Blood-Based Diagnostics. To utilize resources efficiently, the associated documentation and advanced technologies were integrated into a single ELA plan that encompasses ExMC and HHC development efforts. The requirements and high priority analytes was used in the selection of the four in-flight laboratory analysis performers. Based upon the

  20. Chemical Kinetics Laboratory Discussion Worksheet.

    PubMed

    Demoin, Dustin Wayne; Jurisson, Silvia S

    2013-09-10

    A laboratory discussion worksheet and its answer key provide instructors and students a discussion model to further the students' understanding of chemical kinetics. This discussion worksheet includes a section for students to augment their previous knowledge about chemical kinetics measurements, an initial check on students' understanding of basic concepts, a group participation model where students work on solving complex-conceptual problems, and a conclusion to help students connect this discussion to their laboratory or lecture class. Additionally, the worksheet has a detailed solution to a more advanced problem to help students understand how the concepts they have put together relate to problems they will encounter during later formal assessments.

  1. Laboratory Diagnosis of Congenital Toxoplasmosis

    PubMed Central

    Pomares, Christelle

    2016-01-01

    Recent studies have demonstrated that screening and treatment for toxoplasmosis during gestation result in a decrease of vertical transmission and clinical sequelae. Early treatment was associated with improved outcomes. Thus, laboratory methods should aim for early identification of infants with congenital toxoplasmosis (CT). Diagnostic approaches should include, at least, detection of Toxoplasma IgG, IgM, and IgA and a comprehensive review of maternal history, including the gestational age at which the mother was infected and treatment. Here, we review laboratory methods for the diagnosis of CT, with emphasis on serological tools. A diagnostic algorithm that takes into account maternal history is presented. PMID:27147724

  2. Argonne National Laboratory 1985 publications

    SciTech Connect

    Kopta, J.A.; Hale, M.R.

    1987-08-01

    This report is a bibliography of scientific and technical 1985 publications of Argonne National Laboratory. Some are ANL contributions to outside organizations' reports published in 1985. This compilation, prepared by the Technical Information Services Technical Publications Section (TPB), lists all nonrestricted 1985 publications submitted to TPS by Laboratory's Divisions. The report is divided into seven parts: Journal Articles - Listed by first author, ANL Reports - Listed by report number, ANL and non-ANL Unnumbered Reports - Listed by report number, Non-ANL Numbered Reports - Listed by report number, Books and Book Chapters - Listed by first author, Conference Papers - Listed by first author, Complete Author Index.

  3. A Wet Chemistry Laboratory Cell

    NASA Technical Reports Server (NTRS)

    2008-01-01

    This picture of NASA's Phoenix Mars Lander's Wet Chemistry Laboratory (WCL) cell is labeled with components responsible for mixing Martian soil with water from Earth, adding chemicals and measuring the solution chemistry. WCL is part of the Microscopy, Electrochemistry, and Conductivity Analyzer (MECA) instrument suite on board the Phoenix lander.

    The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  4. Laboratory Diagnosis of Congenital Toxoplasmosis.

    PubMed

    Pomares, Christelle; Montoya, Jose G

    2016-10-01

    Recent studies have demonstrated that screening and treatment for toxoplasmosis during gestation result in a decrease of vertical transmission and clinical sequelae. Early treatment was associated with improved outcomes. Thus, laboratory methods should aim for early identification of infants with congenital toxoplasmosis (CT). Diagnostic approaches should include, at least, detection of Toxoplasma IgG, IgM, and IgA and a comprehensive review of maternal history, including the gestational age at which the mother was infected and treatment. Here, we review laboratory methods for the diagnosis of CT, with emphasis on serological tools. A diagnostic algorithm that takes into account maternal history is presented.

  5. [Guidelines concerning stat laboratory process].

    PubMed

    Challine, D; Dhondt, J L; Szymanowicz, A

    2010-12-01

    After a definition of the various emergency situations, vital or organizational, the paper describes the process of urgent laboratory tests requests from the medical prescription until the return of the interpreted results to the clinician. The intervention options of the various professionals to optimize and assure the control of the process 24 hours a day and 7 days/7 are presented. Then, a list of validated available stat tests is proposed. It recovers the main disciplines which have a direct link to bring the help to the clinical teams in responsibilities of critical situations. These propositions must be adapted to the conditions of laboratory local environment.

  6. A Laboratory Safety Trivia Game

    NASA Astrophysics Data System (ADS)

    Gublo, Kristin I.

    2003-04-01

    At the start of each semester, our department begins our chemistry seminar series with a presentation on laboratory safety. All chemistry faculty, staff, graduate students, undergraduate research students, and student laboratory assistants are required to attend. Many of these individuals have sat through these seminars for several years; they feel the seminars are boring and repetitive. In order to enliven these safety presentations, I have created a cooperative online trivia game. It has been my experience that the lab safety trivia game is an effective and entertaining way to teach lab safety.

  7. Laboratory Identification of Arthropod Ectoparasites

    PubMed Central

    Pritt, Bobbi S.

    2014-01-01

    SUMMARY The collection, handling, identification, and reporting of ectoparasitic arthropods in clinical and reference diagnostic laboratories are discussed in this review. Included are data on ticks, mites, lice, fleas, myiasis-causing flies, and bed bugs. The public health importance of these organisms is briefly discussed. The focus is on the morphological identification and proper handling and reporting of cases involving arthropod ectoparasites, particularly those encountered in the United States. Other arthropods and other organisms not of public health concern, but routinely submitted to laboratories for identification, are also briefly discussed. PMID:24396136

  8. Laboratory Course on Drift Chambers

    NASA Astrophysics Data System (ADS)

    García-Ferreira, Ix-B.; García-Herrera, J.; Villaseñor, L.

    2006-09-01

    Drift chambers play an important role in particle physics experiments as tracking detectors. We started this laboratory course with a brief review of the theoretical background and then moved on to the the experimental setup which consisted of a single-sided, single-cell drift chamber. We also used a plastic scintillator paddle, standard P-10 gas mixture (90% Ar, 10% CH4) and a collimated 90Sr source. During the laboratory session the students performend measurements of the following quantities: a) drift velocities and their variations as function of the drift field; b) gas gains and c) diffusion of electrons as they drifted in the gas.

  9. [Laboratory diagnosis of growth hormone].

    PubMed

    Macchia, V; Mariano, A

    1993-09-01

    The role of Clinical Pathology Laboratory in normal and altered growth hormone secretion is discussed. In particular, it is reported that the normal GH secretion can be studied by serum and urine GH determinations whereas the diagnosis of GH deficiency rests upon the demonstration of an inadequate rise serum GH after provocative stimuli and serum measurement of somatomedins (IGF-I) by radioimmunoassay method. As it concerns increase GH secretion the diagnosis is clinically made (acromegaly and gigantism) and the laboratory has only the role to confirm it by the assessment of basal and stimulated GH secretion. PMID:7910655

  10. Laboratory Diagnosis of Congenital Toxoplasmosis.

    PubMed

    Pomares, Christelle; Montoya, Jose G

    2016-10-01

    Recent studies have demonstrated that screening and treatment for toxoplasmosis during gestation result in a decrease of vertical transmission and clinical sequelae. Early treatment was associated with improved outcomes. Thus, laboratory methods should aim for early identification of infants with congenital toxoplasmosis (CT). Diagnostic approaches should include, at least, detection of Toxoplasma IgG, IgM, and IgA and a comprehensive review of maternal history, including the gestational age at which the mother was infected and treatment. Here, we review laboratory methods for the diagnosis of CT, with emphasis on serological tools. A diagnostic algorithm that takes into account maternal history is presented. PMID:27147724

  11. Laboratory identification of arthropod ectoparasites.

    PubMed

    Mathison, Blaine A; Pritt, Bobbi S

    2014-01-01

    The collection, handling, identification, and reporting of ectoparasitic arthropods in clinical and reference diagnostic laboratories are discussed in this review. Included are data on ticks, mites, lice, fleas, myiasis-causing flies, and bed bugs. The public health importance of these organisms is briefly discussed. The focus is on the morphological identification and proper handling and reporting of cases involving arthropod ectoparasites, particularly those encountered in the United States. Other arthropods and other organisms not of public health concern, but routinely submitted to laboratories for identification, are also briefly discussed. PMID:24396136

  12. Federal laboratories for the 21st century

    SciTech Connect

    Gover, J.; Huray, P.G.

    1998-04-01

    Federal laboratories have successfully filled many roles for the public; however, as the 21st Century nears it is time to rethink and reevaluate how Federal laboratories can better support the public and identify new roles for this class of publicly-owned institutions. The productivity of the Federal laboratory system can be increased by making use of public outcome metrics, by benchmarking laboratories, by deploying innovative new governance models, by partnerships of Federal laboratories with universities and companies, and by accelerating the transition of federal laboratories and the agencies that own them into learning organizations. The authors must learn how government-owned laboratories in other countries serve their public. Taiwan`s government laboratory, Industrial Technology Research Institute, has been particularly successful in promoting economic growth. It is time to stop operating Federal laboratories as monopoly institutions; therefore, competition between Federal laboratories must be promoted. Additionally, Federal laboratories capable of addressing emerging 21st century public problems must be identified and given the challenge of serving the public in innovative new ways. Increased investment in case studies of particular programs at Federal laboratories and research on the public utility of a system of Federal laboratories could lead to increased productivity of laboratories. Elimination of risk-averse Federal laboratory and agency bureaucracies would also have dramatic impact on the productivity of the Federal laboratory system. Appropriately used, the US Federal laboratory system offers the US an innovative advantage over other nations.

  13. On cosmology in the laboratory

    PubMed Central

    Leonhardt, Ulf

    2015-01-01

    In transformation optics, ideas from general relativity have been put to practical use for engineering problems. This article asks the question how this debt can be repaid. In discussing a series of recent laboratory experiments, it shows how insights from wave phenomena shed light on the quantum physics of the event horizon. PMID:26217062

  14. Kinesiology Workbook and Laboratory Manual.

    ERIC Educational Resources Information Center

    Harris, Ruth W.

    This manual is written for students in anatomy, kinesiology, or introductory biomechanics courses. The book is divided into two sections, a kinesiology workbook and a laboratory manual. The two sections parallel each other in content and format. Each is divided into three corresponding sections: (1) Anatomical bases for movement description; (2)…

  15. LABORATORY VOICE DATA ENTRY SYSTEM.

    SciTech Connect

    PRAISSMAN,J.L.SUTHERLAND,J.C.

    2003-04-01

    We have assembled a system using a personal computer workstation equipped with standard office software, an audio system, speech recognition software and an inexpensive radio-based wireless microphone that permits laboratory workers to enter or modify data while performing other work. Speech recognition permits users to enter data while their hands are holding equipment or they are otherwise unable to operate a keyboard. The wireless microphone allows unencumbered movement around the laboratory without a ''tether'' that might interfere with equipment or experimental procedures. To evaluate the potential of voice data entry in a laboratory environment, we developed a prototype relational database that records the disposal of radionuclides and/or hazardous chemicals Current regulations in our laboratory require that each such item being discarded must be inventoried and documents must be prepared that summarize the contents of each container used for disposal. Using voice commands, the user enters items into the database as each is discarded. Subsequently, the program prepares the required documentation.

  16. Laboratory Procedures for Medical Assistants.

    ERIC Educational Resources Information Center

    Johnson, Pauline

    The purpose of the manual is to provide the medical assisting student a text which presents the common laboratory procedures in use today in physician's offices. The procedures for performing a complete urinalysis are outlined, along with those for carrying out various hematological tests. Information is also presented to help the student learn to…

  17. CBRN mobile laboratories in Italy

    NASA Astrophysics Data System (ADS)

    Mari, Giorgio; Giraudi, Giampaolo; Bellino, Mariarosa; Pazienza, Michele; Garibaldi, Claudio; Lancia, Corrado

    2009-05-01

    The paper describes the experiences in Italy with the CBRN (Chemical Biological Radiological Nuclear) defense mobile laboratories. These laboratories were constructed by the Italian Army and the Italian Fire Brigades. The purpose of these mobile laboratories is to allow quick transport of the labs to the area of crisis in order to support emergency response in case of CBRN events. The differences between two alternative solutions will be developed in the paper. The first solution is when the lab is to be located in the "dangerous area" (this solution was chosen by the Italian Army) and the alternative approach is to place the mobile lab just outside the dangerous area (this approach was selected by the Italian Fire Brigades). One of the most important devices inside the lab is the isolator (also called "glove box") which allows safe ingress and handling of the "suspicious" samples from the external environment. The isolator has a special chamber for transfer of the sample from the outside. The pressure of the isolator is permanently kept below the air pressure inside the lab by means of one (or more) fan. The operators perform the sample preparations or part of the analysis by handling the sample with the gloves. The material flow inside the lab will be described depending on the kind of identification analysis to be done on the samples. Other devices installed on the mobile CBRN laboratories are: biohazard hood (UE regulation, containment level 2); autoclave; freezer; cleaning skid (tanks, pumps, etc.).

  18. On cosmology in the laboratory.

    PubMed

    Leonhardt, Ulf

    2015-08-28

    In transformation optics, ideas from general relativity have been put to practical use for engineering problems. This article asks the question how this debt can be repaid. In discussing a series of recent laboratory experiments, it shows how insights from wave phenomena shed light on the quantum physics of the event horizon. PMID:26217062

  19. Laboratory Animal Welfare Supplement IV.

    ERIC Educational Resources Information Center

    Gluckstein, Fritz P., Comp.

    This document is the fourth supplement to a 1984 bibliography on laboratory animal welfare. Items presented were selected because they represent some of the most significant of those providing recent information or because they were considered useful. The period covered is October, 1986 through October, 1987. Monographs, conference proceedings,…

  20. In-Flight Laboratory Analysis

    NASA Technical Reports Server (NTRS)

    Baumann, David; Perusek, Gail; Nelson, Emily; Krihak, Michael; Brown, Dan

    2012-01-01

    One-year study objectives align with HRP requirements. HRP requirements include measurement panels for research and medical operations - These measurement panels are distinctly different. Instrument requirements are defined - Power, volume and mass not quite a critical limitation as for medical operations (deep space exploration missions). One-year evaluation goals will lead HHC towards in-flight laboratory analysis capability.

  1. Laboratory Syntheses of Insect Pheromones.

    ERIC Educational Resources Information Center

    Cormier, Russell A.; Hoban, James N.

    1984-01-01

    Provides background information and procedures for the multi-step synthesis of tiger moth and boll weevil pheromones (sex attractants). These syntheses require several laboratory periods. The tiger moth pheromone synthesis is suitable for introductory organic chemistry while the boll weevil pheromone is recommended for an advanced laboratory…

  2. Engineering Water Analysis Laboratory Activity.

    ERIC Educational Resources Information Center

    Schlenker, Richard M.

    The purposes of water treatment in a marine steam power plant are to prevent damage to boilers, steam-operated equipment, and steam and condensate lives, and to keep all equipment operating at the highest level of efficiency. This laboratory exercise is designed to provide students with experiences in making accurate boiler water tests and to…

  3. Business Classroom and Laboratory Equipment.

    ERIC Educational Resources Information Center

    Jorgensen, Carl E.; Campbell, Melvin E.

    1983-01-01

    This catalog, intended to enable business educators to furnish classrooms and laboratories for business and office education, lists appropriate equipment, office furniture, and specialty items. Each category identifies vendors' names and addresses and describes their product lines and price ranges. (SK)

  4. Laboratory Design for Microbiological Safety

    PubMed Central

    Phillips, G. Briggs; Runkle, Robert S.

    1967-01-01

    Of the large amount of funds spent each year in this country on construction and remodeling of biomedical research facilities, a significant portion is directed to laboratories handling infectious microorganisms. This paper is intended for the scientific administrators, architects, and engineers concerned with the design of new microbiological facilities. It develops and explains the concept of primary and secondary barriers for the containment of microorganisms. The basic objectives of a microbiological research laboratory, (i) protection of the experimenter and staff, (ii) protection of the surrounding community, and (iii) maintenance of experimental validity, are defined. In the design of a new infectious-disease research laboratory, early identification should be made of the five functional zones of the facility and their relation to each other. The following five zones and design criteria applicable to each are discussed: clean and transition, research area, animal holding and research area, laboratory support, engineering support. The magnitude of equipment and design criteria which are necessary to integrate these five zones into an efficient and safe facility are delineated. Images Fig. 1 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:4961771

  5. SAFETY IN THE CHEMICAL LABORATORY.

    ERIC Educational Resources Information Center

    STEERE, NORMAN V.

    MONTHLY ARTICLES ON LABORATORY SAFETY THAT APPEARED IN THE "JOURNAL OF CHEMICAL EDUCATION" BETWEEN JANUARY 1964, AND JANUARY 1967, ARE COMBINED IN THIS MANUAL FOR HIGH SCHOOL AND COLLEGE CHEMISTRY TEACHERS. A GENERAL SECTION DEALS WITH (1) RESPONSIBILITY FOR ACCIDENT PREVENTION, (2) SAFETY CONSIDERATION IN RESEARCH PROPOSALS, (3) A SAFETY…

  6. Stationary Engineering Laboratory Manual--2.

    ERIC Educational Resources Information Center

    Steingress, Frederick M.; Frost, Harold J.

    The Stationary Engineering Laboratory Manual 2 was designed for vocational/technical high school students who have received instruction in the basics of stationary engineering. It was developed for students who will be operating a live plant and who will be responsible for supplying steam for heating, cooking, and baking. Each lesson in the manual…

  7. Guide for Science Laboratory Safety.

    ERIC Educational Resources Information Center

    McDermott, John J.

    General and specific safety procedures and recommendations for secondary school science laboratories are provided in this guide. Areas of concern include: (1) chemicals (storage, disposal, toxicity, unstable and incompatible chemicals); (2) microorganisms; (3) plants; (4) animals; (5) electricity; (6) lasers; (7) rockets; (8) eye safety and…

  8. The "Green" Root Beer Laboratory

    ERIC Educational Resources Information Center

    Clary, Renee; Wandersee, James

    2010-01-01

    No, your students will not be drinking green root beer for St. Patrick's Day--this "green" root beer laboratory promotes environmental awareness in the science classroom, and provides a venue for some very sound science content! While many science classrooms incorporate root beer-brewing activities, the root beer lab presented in this article has…

  9. Safety in the Chemical Laboratory

    ERIC Educational Resources Information Center

    Steere, Norman V., Ed.

    1974-01-01

    Discusses the offering of a course in chemical and industrial hazards for junior and senior chemistry majors at City College of New York in 1972. Suggests inclusion of laboratory and industrial safety education as a formal part of chemistry or science curricula. (CC)

  10. Oklahoma's Mobile Computer Graphics Laboratory.

    ERIC Educational Resources Information Center

    McClain, Gerald R.

    This Computer Graphics Laboratory houses an IBM 1130 computer, U.C.C. plotter, printer, card reader, two key punch machines, and seminar-type classroom furniture. A "General Drafting Graphics System" (GDGS) is used, based on repetitive use of basic coordinate and plot generating commands. The system is used by 12 institutions of higher education…

  11. Objectives for Engineering Laboratory Instruction

    ERIC Educational Resources Information Center

    Rice, Stephen L.

    1975-01-01

    Contains a checklist of 36 non-operationally stated items and an evaluation of each by a faculty group of 30. Reports the need for non-cookbook experience, an emphasis on knowledge of specific instruments, and the essential function of laboratory as a teacher of the theory and process of experimentation. (GH)

  12. Laboratory Renovation: The Hidden Cost.

    ERIC Educational Resources Information Center

    Manicone, Santo

    2000-01-01

    Provides an overview of the variety of problems that may be incurred, and the series of procedures that can be used, to manage science laboratory renovation activities. The planning, decontamination and moving, construction and renovation, and moving in stages are examined. (GR)

  13. The Columbia River Research Laboratory

    USGS Publications Warehouse

    Waste, Steve; Reagan, Rachel

    2012-01-01

    The mission of the Columbia River Research Laboratory is to serve the public by providing scientific information to support the stewardship of our Nation's fish and aquatic resources, with emphasis on the Columbia River basin. As a part of the U.S. Geological Survey (USGS) Western Fisheries Research Center, we conduct objective, relevant research and seek partnerships to help fulfill this mission.

  14. Laboratory Manual, Electrical Engineering 24.

    ERIC Educational Resources Information Center

    Syracuse Univ., NY. Dept. of Electrical Engineering.

    Part of a series of materials in the electrical engineering sequence developed under contract with the United States Office of Education, this laboratory manual provides 10 projects dealing with basic electrical instrumentation and measurement that would be appropriate for a first course. Exercises include activities involving (1) voltmeters,…

  15. Laboratory Maintenance of Rickettsia rickettsii

    PubMed Central

    Beier-Sexton, Magda; Azad, Abdu F.

    2009-01-01

    This unit includes protocols for the laboratory maintenance of the obligate intracellular bacterium Rickettsia rickettsii, including propagation in mammalian cell cultures, as well as isolation, counting, and storage procedures. Regulations for working with R. rickettsii in biosafety level 3 containment are also discussed. PMID:19016440

  16. An Integrated Cardiovascular Teaching Laboratory.

    ERIC Educational Resources Information Center

    Peterson, Nils S.; And Others

    1985-01-01

    Describes computer strategies designed to emphasize teaching of an integrative view of cardiovascular physiology. They include: (1) a group of simulated laboratories which emphasize an explicit integration of ideas; (2) fault-finding exercises in which those ideas are put to use; and (3) a novel testing device for measuring student progress. (JN)

  17. Neuroscience Laboratory and Classroom Activities.

    ERIC Educational Resources Information Center

    Bellamy, Mary Louise Ed.; Frame, Kathy Ed.

    This publication is part of a larger project involving partnerships between high school biology teachers and neuroscientists. It contains neuroscience laboratories and classroom activities, most of which provide opportunities for students to design and conduct their own experiments. Each lab contains directions for both teachers and students and…

  18. Biological Laboratory, Ann Arbor, Michigan

    USGS Publications Warehouse

    Moffett, James W.

    1963-01-01

    This laboratory located about 40 miles west of Detroit, near the intersection of highways I-94 and US-23, can be reached by bus, railroad, or via commercial airlines to Detroit Willow Run or Metropolitan airports. Field biological stations are located in Wisconsin at Ashland; in Ohio at Sandusky; and in Michigan at Ludington, Marquette, Millersburg, and Northville.

  19. Local Government: The Learning Laboratory.

    ERIC Educational Resources Information Center

    Degelman, Charles, Ed.

    2001-01-01

    This issue of "Service-Learning Network" looks at the ways that service learning can transform local government into a learning laboratory for civic education. The first article, "Creating the Missing Link: Local Government, Service Learning, and Civic Education" (Todd Clark), introduces the issue. "Service Learning and Local Government" (Ann…

  20. Pollution Microbiology, A Laboratory Manual.

    ERIC Educational Resources Information Center

    Finstein, Melvin S.

    This manual is designed for use in the laboratory phase of courses dealing with microbial aspects of pollution. It attempts to cover the subject area broadly in four major categories: (1) microorganisms in clean and polluted waters, (2) carbonaceous pollutants, (3) nitrogen, phosphorus, iron, and sulfur as pollutants, and (4) sanitary…

  1. Research and Development. Laboratory Activities.

    ERIC Educational Resources Information Center

    Gallaway, Ann, Ed.

    Research and Development is a laboratory-oriented course that includes the appropriate common essential elements for industrial technology education plus concepts and skills related to research and development. This guide provides teachers of the course with learning activities for secondary students. Introductory materials include an…

  2. Computer-Assisted Laboratory Stations.

    ERIC Educational Resources Information Center

    Snyder, William J., Hanyak, Michael E.

    1985-01-01

    Describes the advantages and features of computer-assisted laboratory stations for use in a chemical engineering program. Also describes a typical experiment at such a station: determining the response times of a solid state humidity sensor at various humidity conditions and developing an empirical model for the sensor. (JN)

  3. Laboratory Connections. Gas Monitoring Transducers.

    ERIC Educational Resources Information Center

    Powers, Michael H.

    1988-01-01

    Discusses three types of sensors; pressure, gas detection, and relative humidity. Explains their use for laboratory measurements of gas pressure and detection of specific gaseous species. Shows diagrams of devices and circuits along with examples and applications including microcomputer interfacing. (RT)

  4. Neutron metrology laboratory facility simulation.

    PubMed

    Pereira, Mariana; Salgado, Ana P; Filho, Aidano S; Pereira, Walsan W; Patrão, Karla C S; Fonseca, Evaldo S

    2014-10-01

    The Neutron Low Scattering Laboratory in Brazil has been completely rebuilt. Evaluation of air attenuation parameters and neutron component scattering in the room was done using Monte Carlo simulation code. Neutron fields produced by referenced neutron source were used to calculate neutron scattering and air attenuation.

  5. On cosmology in the laboratory.

    PubMed

    Leonhardt, Ulf

    2015-08-28

    In transformation optics, ideas from general relativity have been put to practical use for engineering problems. This article asks the question how this debt can be repaid. In discussing a series of recent laboratory experiments, it shows how insights from wave phenomena shed light on the quantum physics of the event horizon.

  6. Planning for Shops and Laboratories.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Instruction, Raleigh. Div. of School Planning.

    General guidelines for educators and architects in planning for industrial education, shops, and laboratory facilities necessary to the instructional program, are provided. Characteristics of the environment discussed are as follows--(1) spatial, (2) thermal, (3) visual, (4) sonic, and (5) aesthetic. Utility services covered are electrical power,…

  7. Neutron metrology laboratory facility simulation.

    PubMed

    Pereira, Mariana; Salgado, Ana P; Filho, Aidano S; Pereira, Walsan W; Patrão, Karla C S; Fonseca, Evaldo S

    2014-10-01

    The Neutron Low Scattering Laboratory in Brazil has been completely rebuilt. Evaluation of air attenuation parameters and neutron component scattering in the room was done using Monte Carlo simulation code. Neutron fields produced by referenced neutron source were used to calculate neutron scattering and air attenuation. PMID:24864318

  8. Laboratory Maintenance of Acinetobacter baumannii.

    PubMed

    Jacobs, Anna C; Zurawski, Daniel V

    2014-01-01

    Acinetobacter baumannii has recently drawn great interest in the microbiology research community due to the increase in clinical antibiotic resistance of this organism, and persistence of this bacterial species in the hospital environment. This unit outlines protocols for the growth and maintenance of A. baumannii in the laboratory. PMID:25367273

  9. Laboratory Exercise on Active Transport.

    ERIC Educational Resources Information Center

    Stalheim-Smith, Ann; Fitch, Greg K.

    1985-01-01

    Describes a laboratory exercise which demonstrates qualitatively the specificity of the transport mechanism, including a consideration of the competitive inhibition, and the role of adenosine triphosphate (ATP) in active transport. The exercise, which can be completed in two to three hours by groups of four students, consistently produces reliable…

  10. A Unified Introductory Chemistry Laboratory

    ERIC Educational Resources Information Center

    Splittgerber, A. G.; And Others

    1971-01-01

    Laboratory procedures are explained for taking benzoic acid and using it or one of its derivatives throughout an introductory lab course. Synthesis, purification, weight determination, identification of an acid, equilibrium constant, salt preparation, salt analysis, and salt solubility measurements are involved in the semester's experience. (DS)

  11. School Chemistry Laboratory Safety Guide

    ERIC Educational Resources Information Center

    Brundage, Patricia; Palassis, John

    2006-01-01

    The guide presents information about ordering, using, storing, and maintaining chemicals in the high school laboratory. The guide also provides information about chemical waste, safety and emergency equipment, assessing chemical hazards, common safety symbols and signs, and fundamental resources relating to chemical safety, such as Material…

  12. Aeroshell for Mars Science Laboratory

    NASA Technical Reports Server (NTRS)

    2008-01-01

    This image from July 2008 shows the aeroshell for NASA's Mars Science Laboratory while it was being worked on by spacecraft technicians at Lockheed Martin Space Systems Company near Denver.

    This hardware was delivered in early fall of 2008 to NASA's Jet Propulsion Laboratory, Pasadena, Calif., where the Mars Science Laboratory spacecraft is being assembled and tested.

    The aeroshell encapsulates the mission's rover and descent stage during the journey from Earth to Mars and shields them from the intense heat of friction with that upper atmosphere during the initial portion of descent.

    The aeroshell has two main parts: the backshell, which is on top in this image and during the descent, and the heat shield, on the bottom. The heat shield in this image is an engineering unit for testing. The heat shield to be used in flight will be substituted later. The heat shield has a diameter of about 15 feet. For comparison, the heat shields for NASA's Mars Exploraton Rovers Spirit and Opportunity were 8.5 feet and the heat shields for the Apollo capsules that protected astronauts returning to Earth from the moon were just under 13 feet.

    In addition to protecting the Mars Science Laboratory rover, the backshell provides structural support for the descent stage's parachute and sky crane, a system that will lower the rover to a soft landing on the surface of Mars. The backshell for the Mars Science Laboratory is made of an aluminum honeycomb structure sandwiched between graphite-epoxy face sheets. It is covered with a thermal protection system composed of a cork/silicone super light ablator material that originated with the Viking landers of the 1970s. This ablator material has been used on the heat shields of all NASA Mars landers in the past, but this mission is the first Mars mission using it on the backshell.

    The heat shield for Mars Science Laboratory's flight will use tiles made of phenolic impregnated carbon ablator. The engineering unit in

  13. 40 CFR 141.705 - Approved laboratories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Cryptosporidium analysis by an equivalent State laboratory certification program. (b) E. coli. Any laboratory... coliform or fecal coliform analysis under § 141.74 is approved for E. coli analysis under this subpart when the laboratory uses the same technique for E. coli that the laboratory uses for § 141.74....

  14. 40 CFR 141.705 - Approved laboratories.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Cryptosporidium analysis by an equivalent State laboratory certification program. (b) E. coli. Any laboratory... coliform or fecal coliform analysis under § 141.74 is approved for E. coli analysis under this subpart when the laboratory uses the same technique for E. coli that the laboratory uses for § 141.74....

  15. 40 CFR 141.705 - Approved laboratories.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Cryptosporidium analysis by an equivalent State laboratory certification program. (b) E. coli. Any laboratory... coliform or fecal coliform analysis under § 141.74 is approved for E. coli analysis under this subpart when the laboratory uses the same technique for E. coli that the laboratory uses for § 141.74....

  16. 40 CFR 141.705 - Approved laboratories.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Cryptosporidium analysis by an equivalent State laboratory certification program. (b) E. coli. Any laboratory... coliform or fecal coliform analysis under § 141.74 is approved for E. coli analysis under this subpart when the laboratory uses the same technique for E. coli that the laboratory uses for § 141.74....

  17. 40 CFR 141.705 - Approved laboratories.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Cryptosporidium analysis by an equivalent State laboratory certification program. (b) E. coli. Any laboratory... coliform or fecal coliform analysis under § 141.74 is approved for E. coli analysis under this subpart when the laboratory uses the same technique for E. coli that the laboratory uses for § 141.74....

  18. 21 CFR 606.140 - Laboratory controls.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Laboratory controls. 606.140 Section 606.140 Food... CURRENT GOOD MANUFACTURING PRACTICE FOR BLOOD AND BLOOD COMPONENTS Laboratory Controls § 606.140 Laboratory controls. Laboratory control procedures shall include: (a) The establishment of...

  19. 7 CFR 983.1 - Accredited laboratory.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., ARIZONA, AND NEW MEXICO Definitions § 983.1 Accredited laboratory. An accredited laboratory is a laboratory that has been approved or accredited by the U.S. Department of Agriculture. ... 7 Agriculture 8 2013-01-01 2013-01-01 false Accredited laboratory. 983.1 Section 983.1...

  20. 7 CFR 996.21 - USDA laboratory.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false USDA laboratory. 996.21 Section 996.21 Agriculture... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.21 USDA laboratory. USDA laboratory means laboratories of the Science and Technology Programs, Agricultural...

  1. 7 CFR 996.21 - USDA laboratory.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false USDA laboratory. 996.21 Section 996.21 Agriculture... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.21 USDA laboratory. USDA laboratory means laboratories of the Science and Technology Programs, Agricultural...

  2. 7 CFR 996.21 - USDA laboratory.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false USDA laboratory. 996.21 Section 996.21 Agriculture... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.21 USDA laboratory. USDA laboratory means laboratories of the Science and Technology Programs, Agricultural...

  3. 7 CFR 996.21 - USDA laboratory.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false USDA laboratory. 996.21 Section 996.21 Agriculture... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.21 USDA laboratory. USDA laboratory means laboratories of the Science and Technology Programs, Agricultural...

  4. 7 CFR 983.1 - Accredited laboratory.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., ARIZONA, AND NEW MEXICO Definitions § 983.1 Accredited laboratory. An accredited laboratory is a laboratory that has been approved or accredited by the U.S. Department of Agriculture. ... 7 Agriculture 8 2014-01-01 2014-01-01 false Accredited laboratory. 983.1 Section 983.1...

  5. 7 CFR 996.21 - USDA laboratory.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false USDA laboratory. 996.21 Section 996.21 Agriculture... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.21 USDA laboratory. USDA laboratory means laboratories of the Science and Technology Programs, Agricultural...

  6. 7 CFR 983.1 - Accredited laboratory.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., ARIZONA, AND NEW MEXICO Definitions § 983.1 Accredited laboratory. An accredited laboratory is a laboratory that has been approved or accredited by the U.S. Department of Agriculture. ... 7 Agriculture 8 2012-01-01 2012-01-01 false Accredited laboratory. 983.1 Section 983.1...

  7. 7 CFR 983.1 - Accredited laboratory.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., ARIZONA, AND NEW MEXICO Definitions § 983.1 Accredited laboratory. An accredited laboratory is a laboratory that has been approved or accredited by the U.S. Department of Agriculture. ... 7 Agriculture 8 2011-01-01 2011-01-01 false Accredited laboratory. 983.1 Section 983.1...

  8. 21 CFR 226.58 - Laboratory controls.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Laboratory controls. 226.58 Section 226.58 Food... Laboratory controls. Laboratory controls shall include the establishment of adequate specifications and test... standards of identity, strength, quality, and purity. Laboratory controls shall include: (a)...

  9. 27 CFR 22.107 - Pathological laboratories.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Pathological laboratories... Pathological laboratories. (a) Pathological laboratories, not operated by a hospital or sanitarium, may... sanitariums. If a pathological laboratory does not exclusively conduct analyses or tests for hospitals...

  10. 21 CFR 226.58 - Laboratory controls.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Laboratory controls. 226.58 Section 226.58 Food... Laboratory controls. Laboratory controls shall include the establishment of adequate specifications and test... standards of identity, strength, quality, and purity. Laboratory controls shall include: (a)...

  11. 21 CFR 226.58 - Laboratory controls.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Laboratory controls. 226.58 Section 226.58 Food... Laboratory controls. Laboratory controls shall include the establishment of adequate specifications and test... standards of identity, strength, quality, and purity. Laboratory controls shall include: (a)...

  12. 27 CFR 22.107 - Pathological laboratories.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Pathological laboratories... Pathological laboratories. (a) Pathological laboratories, not operated by a hospital or sanitarium, may... sanitariums. If a pathological laboratory does not exclusively conduct analyses or tests for hospitals...

  13. 21 CFR 606.140 - Laboratory controls.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 7 2012-04-01 2012-04-01 false Laboratory controls. 606.140 Section 606.140 Food... CURRENT GOOD MANUFACTURING PRACTICE FOR BLOOD AND BLOOD COMPONENTS Laboratory Controls § 606.140 Laboratory controls. Laboratory control procedures shall include: (a) The establishment of...

  14. 21 CFR 606.140 - Laboratory controls.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 7 2014-04-01 2014-04-01 false Laboratory controls. 606.140 Section 606.140 Food... CURRENT GOOD MANUFACTURING PRACTICE FOR BLOOD AND BLOOD COMPONENTS Laboratory Controls § 606.140 Laboratory controls. Laboratory control procedures shall include: (a) The establishment of...

  15. 21 CFR 606.140 - Laboratory controls.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 7 2013-04-01 2013-04-01 false Laboratory controls. 606.140 Section 606.140 Food... CURRENT GOOD MANUFACTURING PRACTICE FOR BLOOD AND BLOOD COMPONENTS Laboratory Controls § 606.140 Laboratory controls. Laboratory control procedures shall include: (a) The establishment of...

  16. 21 CFR 226.58 - Laboratory controls.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Laboratory controls. 226.58 Section 226.58 Food... Laboratory controls. Laboratory controls shall include the establishment of adequate specifications and test... standards of identity, strength, quality, and purity. Laboratory controls shall include: (a)...

  17. 27 CFR 22.107 - Pathological laboratories.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Pathological laboratories... Pathological laboratories. (a) Pathological laboratories, not operated by a hospital or sanitarium, may... sanitariums. If a pathological laboratory does not exclusively conduct analyses or tests for hospitals...

  18. 30 CFR 795.10 - Qualified laboratories.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Qualified laboratories. 795.10 Section 795.10... laboratories. (a) Basic qualifications. To be designated a qualified laboratory, a firm shall demonstrate that... necessary field samples and making hydrologic field measurements and analytical laboratory determinations...

  19. 21 CFR 211.194 - Laboratory records.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Laboratory records. 211.194 Section 211.194 Food... Laboratory records. (a) Laboratory records shall include complete data derived from all tests necessary to..., including all graphs, charts, and spectra from laboratory instrumentation, properly identified to show...

  20. 21 CFR 606.140 - Laboratory controls.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 7 2011-04-01 2010-04-01 true Laboratory controls. 606.140 Section 606.140 Food... CURRENT GOOD MANUFACTURING PRACTICE FOR BLOOD AND BLOOD COMPONENTS Laboratory Controls § 606.140 Laboratory controls. Laboratory control procedures shall include: (a) The establishment of...

  1. 30 CFR 795.10 - Qualified laboratories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Qualified laboratories. 795.10 Section 795.10... laboratories. (a) Basic qualifications. To be designated a qualified laboratory, a firm shall demonstrate that... necessary field samples and making hydrologic field measurements and analytical laboratory determinations...

  2. 27 CFR 22.107 - Pathological laboratories.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Pathological laboratories... Pathological laboratories. (a) Pathological laboratories, not operated by a hospital or sanitarium, may... sanitariums. If a pathological laboratory does not exclusively conduct analyses or tests for hospitals...

  3. 30 CFR 795.10 - Qualified laboratories.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Qualified laboratories. 795.10 Section 795.10... laboratories. (a) Basic qualifications. To be designated a qualified laboratory, a firm shall demonstrate that... necessary field samples and making hydrologic field measurements and analytical laboratory determinations...

  4. 30 CFR 795.10 - Qualified laboratories.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Qualified laboratories. 795.10 Section 795.10... laboratories. (a) Basic qualifications. To be designated a qualified laboratory, a firm shall demonstrate that... necessary field samples and making hydrologic field measurements and analytical laboratory determinations...

  5. 21 CFR 226.58 - Laboratory controls.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Laboratory controls. 226.58 Section 226.58 Food... Laboratory controls. Laboratory controls shall include the establishment of adequate specifications and test... standards of identity, strength, quality, and purity. Laboratory controls shall include: (a)...

  6. 27 CFR 22.107 - Pathological laboratories.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Pathological laboratories... Pathological laboratories. (a) Pathological laboratories, not operated by a hospital or sanitarium, may... sanitariums. If a pathological laboratory does not exclusively conduct analyses or tests for hospitals...

  7. Informatics and the clinical laboratory.

    PubMed

    Jones, Richard G; Johnson, Owen A; Batstone, Gifford

    2014-08-01

    The nature of pathology services is changing under the combined pressures of increasing workloads, cost constraints and technological advancement. In the face of this, laboratory systems need to meet new demands for data exchange with clinical electronic record systems for test requesting and results reporting. As these needs develop, new challenges are emerging especially with respect to the format and content of the datasets which are being exchanged. If the potential for the inclusion of intelligent systems in both these areas is to be realised, the continued dialogue between clinicians and laboratory information specialists is of paramount importance. Requirements of information technology (IT) in pathology, now extend well beyond the provision of purely analytical data. With the aim of achieving seamless integration of laboratory data into the total clinical pathway, 'Informatics' - the art and science of turning data into useful information - is becoming increasingly important in laboratory medicine. Informatics is a powerful tool in pathology - whether in implementing processes for pathology modernisation, introducing new diagnostic modalities (e.g. proteomics, genomics), providing timely and evidence-based disease management, or enabling best use of limited and often costly resources. Providing appropriate information to empowered and interested patients - which requires critical assessment of the ever-increasing volume of information available - can also benefit greatly from appropriate use of informatics in enhancing self-management of long term conditions. The increasing demands placed on pathology information systems in the context of wider developmental change in healthcare delivery are explored in this review. General trends in medical informatics are reflected in current priorities for laboratory medicine, including the need for unified electronic records, computerised order entry, data security and recovery, and audit. We conclude that there is a

  8. Informatics and the Clinical Laboratory

    PubMed Central

    Jones, Richard G; Johnson, Owen A; Batstone, Gifford

    2014-01-01

    The nature of pathology services is changing under the combined pressures of increasing workloads, cost constraints and technological advancement. In the face of this, laboratory systems need to meet new demands for data exchange with clinical electronic record systems for test requesting and results reporting. As these needs develop, new challenges are emerging especially with respect to the format and content of the datasets which are being exchanged. If the potential for the inclusion of intelligent systems in both these areas is to be realised, the continued dialogue between clinicians and laboratory information specialists is of paramount importance. Requirements of information technology (IT) in pathology, now extend well beyond the provision of purely analytical data. With the aim of achieving seamless integration of laboratory data into the total clinical pathway, ‘Informatics’ – the art and science of turning data into useful information – is becoming increasingly important in laboratory medicine. Informatics is a powerful tool in pathology – whether in implementing processes for pathology modernisation, introducing new diagnostic modalities (e.g. proteomics, genomics), providing timely and evidence-based disease management, or enabling best use of limited and often costly resources. Providing appropriate information to empowered and interested patients – which requires critical assessment of the ever-increasing volume of information available – can also benefit greatly from appropriate use of informatics in enhancing self-management of long term conditions. The increasing demands placed on pathology information systems in the context of wider developmental change in healthcare delivery are explored in this review. General trends in medical informatics are reflected in current priorities for laboratory medicine, including the need for unified electronic records, computerised order entry, data security and recovery, and audit. We conclude that

  9. [Clinical laboratory in the 21st century].

    PubMed

    Kawai, T

    1991-03-01

    Alvin Toffler has predicted that the "Third Wave" will be a society which be decentralized, diversified and customized, computer-dependent. Medical care and also clinical laboratory will be revolutionalized in a more or less similar direction to that predicted by him. Laboratory physicians and scientists should try to improve laboratory services, particularly establishment of adequate normal values, common expression of various laboratory results, introduction of medical decision making and recommended guideline for laboratory use in primary health care.

  10. Pacific Northwest Laboratory CALIOPE overview

    SciTech Connect

    McDowell, R.S.; Kelly, J.F.; Sharpe, S.W.

    1995-03-01

    This overview covers progress in the following areas in which Pacific Northwest Laboratory contributes to the CALIOPE Program: (1) Fabrication of electro-optic modulators to generate FM-coding on IR lasers in the 8-12 and 3-5 {mu}m regions. (2) IR spectroscopy of signature species, abnormal isotopic distributions, hydrolysis and kinetics of effluents interacting with the atmosphere, and reflectance measurements of natural surfaces. (3) Systems analysis of FM-DIAL concepts, including lateral phase coherence and MTF measurements, and laboratory tests of detector technology and demodulation methods. (4) Field tests of FM-DIAL, covering field validation of portable diode laser concepts, FM-CO{sub 2} interrogation of Hanford sites, and signal returns from natural specular surfaces. (5) Ancillary matters: ground-truthing at Hanford (and RSTR?), countermeasures, and new laser design concepts.

  11. Micromachined probes for laboratory plasmas

    NASA Astrophysics Data System (ADS)

    Chiang, Franklin Changta

    As we begin to find more applications for plasmas in our everyday lives, the ability to characterize and understand their inner workings becomes increasingly important. Much of our current understanding of plasma physics comes from investigations conducted in diffuse, outer space plasmas where experimenters have no control over the environment or experimental conditions and one measures interesting phenomena only by chance when the spacecraft or satellite passes through them. Ideally, experiments should be performed in a controlled environment, where plasma events can be deliberately and reliably created when wanted and probes placed precisely within the plasma. Unfortunately, often due to their size, probes used in outer space are unsuitable for use in high-density laboratory plasmas, and constructing probes that can be used in terrestrial plasmas is a considerable challenge. This dissertation presents the development, implementation, and experimental results of three micromachined probes capable of measuring voltage and electric field, ion energies, and changing magnetic fields (B-dot) in laboratory plasmas.

  12. Argonne National Laboratory 1986 publications

    SciTech Connect

    Kopta, J.A.; Springer, C.J.

    1987-12-01

    This report is a bibliography of scientific and technical 1986 publications of Argonne National Laboratory. Some are ANL contributions to outside organizations' reports published in 1986. This compilation, prepared by the Technical Information Services Technical Publications Section (TPS), lists all nonrestricted 1986 publications submitted to TPS by the Laboratory's Divisions. Author indexes list ANL authors only. If a first author is not an ANL employee, an asterisk in the bibliographic citation indicates the first ANL author. The report is divided into seven parts: Journal Articles -- Listed by first author; ANL Reports -- Listed by report number; ANL and non-ANL Unnumbered Reports -- Listed by report number; Non-ANL Numbered Reports -- Listed by report number; Books and Book Chapters -- Listed by first author; Conference Papers -- Listed by first author; and Complete Author Index.

  13. [Surgical laboratory in pregraduate medicine.

    PubMed

    Tapia-Jurado, Jesús

    2011-01-01

    Surgical laboratory in pregraduate students in medicine is beneficial and improves learning processes in cognitive aspects and skills acquisition. It is also an early initiation into scientific research. The laboratory is the introductory pathway into basic concepts of medical science (meaningful learning). It is also where students gain knowledge in procedures and abilities to obtain professional skills, an interactive teacher-student process. Medicine works rapidly to change from an art to a science. This fact compromises all schools and medical faculties to analyze their actual lesson plans. Simulators give students confidence and ability and save time, money and resources, eliminating at the same time the ethical factor of using live animals and the fear of patient safety. Multimedia programs may give a cognitive context evolving logically with an explanation based on written and visual animation followed by a clinical problem and its demonstration in a simulator, all before applying knowledge to the patient.

  14. SESAME/Environmental Research Laboratories

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The Environmental Research Laboratories (ERL) have been designated as the basic research group of the National Oceanic and Atmospheric Administration (NOAA). ERL performs an integrated program of research and research services directed toward understanding the geophysical environment, protecting the environment, and improving the forecasting ability of NOAA. Twenty-four laboratories located throughout the United States comprise ERL. The Project SESAME (Severe Environmental Storms and Mesoscale Experiment) Planning Office is a project office within ERL. SESAME is conceived as a joint effort involving NOAA, NASA, NSF, and the atmospheric science community to lay the foundation for improved prediction of severe convective storms. The scientific plan for SESAME includes a phased buildup of analysis, modeling, instrumentation development and procurement, and limited-scale observational activities.

  15. The APL image processing laboratory

    NASA Technical Reports Server (NTRS)

    Jenkins, J. O.; Randolph, J. P.; Tilley, D. G.; Waters, C. A.

    1984-01-01

    The present and proposed capabilities of the Central Image Processing Laboratory, which provides a powerful resource for the advancement of programs in missile technology, space science, oceanography, and biomedical image analysis, are discussed. The use of image digitizing, digital image processing, and digital image output permits a variety of functional capabilities, including: enhancement, pseudocolor, convolution, computer output microfilm, presentation graphics, animations, transforms, geometric corrections, and feature extractions. The hardware and software of the Image Processing Laboratory, consisting of digitizing and processing equipment, software packages, and display equipment, is described. Attention is given to applications for imaging systems, map geometric correction, raster movie display of Seasat ocean data, Seasat and Skylab scenes of Nantucket Island, Space Shuttle imaging radar, differential radiography, and a computerized tomographic scan of the brain.

  16. [Surgical laboratory in pregraduate medicine.

    PubMed

    Tapia-Jurado, Jesús

    2011-01-01

    Surgical laboratory in pregraduate students in medicine is beneficial and improves learning processes in cognitive aspects and skills acquisition. It is also an early initiation into scientific research. The laboratory is the introductory pathway into basic concepts of medical science (meaningful learning). It is also where students gain knowledge in procedures and abilities to obtain professional skills, an interactive teacher-student process. Medicine works rapidly to change from an art to a science. This fact compromises all schools and medical faculties to analyze their actual lesson plans. Simulators give students confidence and ability and save time, money and resources, eliminating at the same time the ethical factor of using live animals and the fear of patient safety. Multimedia programs may give a cognitive context evolving logically with an explanation based on written and visual animation followed by a clinical problem and its demonstration in a simulator, all before applying knowledge to the patient. PMID:21477522

  17. Quality in pathology laboratory practice.

    PubMed

    Weinstein, S

    1995-06-01

    Quality refers not only to analytical quality control, a traditional area of laboratory excellence, but to the entire science of quality management. As measures of quality, structural indicators refer to staffing and physical facilities, process indicators to the institutions operations and, perhaps most importantly, outcome indicators address the ultimate patient care uses that pathology information is put to. Comparison of performance to peer laboratories, external quality control, is a practical, if limited, yardstick of performance. Customer satisfaction and turn-around-time of tests are receiving more recent attention as quality measures. Blood banking, because of its inherently complex cycle from donor phlebotomy to product infusion, requires special considerations with regard to quality management. Reporting of anatomical pathology, where the only gold standard is a consensus of experts, also does not lend itself to classical numerical quality assessment. PMID:7670717

  18. Savannah River Laboratory monthly report

    SciTech Connect

    Not Available

    1985-12-01

    Efforts in the area of nuclear reactors and scientific computations are reported, including: robotics; reactor irradiation of nonend-bonded target slugs; computer link with Los Alamos National Laboratory; L-reactor thermal mitigation; aging of carbon in SRP reactor airborne activity confinement systems; and reactor risk assessment for earthquakes. Activities in chemical processes and environmental technology are reported, including: solids formation in a plutonium product stream; revised safety analysis reporting for F and H-Canyon operations; organic carbon analysis of DWPF samples; applications of Fourier transform infrared spectrometry; water chemistry analyzer for SRP reactors; and study of a biological community in Par Pond. Defense waste and laboratory operations activities include: Pu-238 waste incinerator startup; experimental canister frit blaster; saltstone disposal area design; powder metallurgy core diameter measurement; and a new maintenance shop facility. Nuclear materials planning encompasses decontamination and decommissioning of SRP facilities and a comprehensive compilation of environmental and nuclear safety issues. (LEW)

  19. Documenting Laboratory Procedures with Video

    PubMed Central

    Wyttenbach, Robert A.

    2015-01-01

    Demonstrating laboratory procedures in person during class time can be time-consuming. When procedures are done under a microscope, live demonstration is also impractical because of the limited number of students who can view the demonstration at once. Creating videos beforehand, which students can watch before class and review during lab sessions, solves both of these problems. This article suggests ways to make and distribute high quality video of microscopic procedures. PMID:26240520

  20. Photometrics at Sandia National Laboratories

    SciTech Connect

    McWilliams, J.Y.; Hill, R.A.; Hughes, R.L.

    1990-07-01

    This report highlights Sandia National Laboratories' work in the following areas: photometrics and optical development; still and time-lapse photography; real-time motion photography; high-speed photography; image-motion photography; schlieren photography; ultra-high-speed photography; electronic imaging; shuttered video and high-speed video; infrared imaging radiometry; exoatmospheric photography and videography; microdensitometry and image analysis; and optical system design and development.

  1. Laboratory chemistry and stratospheric clouds

    NASA Technical Reports Server (NTRS)

    Molina, Mario J.

    1989-01-01

    Results are presented from laboratory experiments on the chemistry of ice particles to study the role of HCl and ClONO2 from CFCs in stratospheric ozone depletion over Antarctica. It is found that gaseous HCl is scavenged with high efficiency by the ice and the gas phase chlorine nitrate may react with the HCL-containing ice to produce Cl2. Also, consideration is given ot the behavior of solid nitric acid trihydrate and sulfuric acid aerosols.

  2. Oak Ridge National Laboratory Review

    SciTech Connect

    Krause, C.; Pearce, J.; Zucker, A.

    1992-01-01

    This report presents brief descriptions of the following programs at Oak Ridge National Laboratory: The effects of pollution and climate change on forests; automation to improve the safety and efficiency of rearming battle tanks; new technologies for DNA sequencing; ORNL probes the human genome; ORNL as a supercomputer research center; paving the way to superconcrete made with polystyrene; a new look at supercritical water used in waste treatment; and small mammals as environmental monitors.

  3. Laboratory studies of volcanic jets.

    USGS Publications Warehouse

    Kieffer, S.W.; Sturtevant, B.

    1984-01-01

    Laboratory experiments to study the fluid dynamics of violent volcanic eruptions employed pure gases erupted from small reservoirs. The gases used were Freon 12 and Freon 22, both of high molecular weight and high density, to model heavy, particulate- laden volcanic gases; nitrogen, a moderate molecular weight and density gas with well known thermodynamic properties; and He, a low molecular weight and density gas used as an analogue of steam, the dominant gas of most volcanic eruptions.-W.H.B.

  4. The Columbia River Research Laboratory

    USGS Publications Warehouse

    Maule, Alec

    2005-01-01

    The U.S. Geological Survey's Columbia River Research Laboratory (CRRL) was established in 1978 at Cook, Washington, in the Columbia River Gorge east of Portland, Oregon. The CRRL, as part of the Western Fisheries Research Center, conducts research on fishery issues in the Columbia River Basin. Our mission is to: 'Serve the public by providing scientific information to support the stewardship of our Nation's fish and aquatic resources...by conducting objective, relevant research'.

  5. Purdue Solar Energy Utilization Laboratory

    SciTech Connect

    Agrawal, Rakesh

    2014-01-21

    The objective of this project is to establish and set-up a laboratory that will facilitate research and development of new low-cost and high-efficiency solar energy utilization technologies at Purdue University. The outcome will help spur the creation of solar energy start-up companies and eventually a solar energy industry in Indiana that can help fulfill the growing national demand for solar energy.

  6. Laboratory and Space Plasma Studies

    NASA Astrophysics Data System (ADS)

    Hyman, Ellis

    1996-08-01

    The work performed by Science Applications International Corporation (SAIC) on this contract, 'Laboratory and Space Plasma Studies,' Contract Number N00014-93-C-2178, SAIC Project Number 01-0157-03-6984, encompasses a wide range of topics in experimental, computational, and analytical laboratory and space plasma physics. The accomplishments described in this report have been in support of the programs of the Laser Plasma Branch (Code 6730) and other segments of the Plasma Physics Division at the Naval Research Laboratory (NRL) and cover the period 27 September 1993 to August 1, 1996. SAIC's efforts have been supported by subcontracts or consulting agreements with Pulse Sciences, Inc., Clark Richardson, and Biskup Consulting Engineers, Pharos Technical Enterprises, Plex Corporation, Cornell University, Stevens Institute of Technology, the University of Connecticut, Plasma Materials and Technologies, Inc., and GaSonics International, Inc. In the following discussions section we will describe each of the topics investigated and the results obtained. Much of the research work has resulted in journal publications and NRL Memorandum Reports in which the investigation is described in detail. These reports are included as Appendices to this Final Report.

  7. Scientific Assistant Virtual Laboratory (SAVL)

    NASA Astrophysics Data System (ADS)

    Alaghband, Gita; Fardi, Hamid; Gnabasik, David

    2007-03-01

    The Scientific Assistant Virtual Laboratory (SAVL) is a scientific discovery environment, an interactive simulated virtual laboratory, for learning physics and mathematics. The purpose of this computer-assisted intervention is to improve middle and high school student interest, insight and scores in physics and mathematics. SAVL develops scientific and mathematical imagination in a visual, symbolic, and experimental simulation environment. It directly addresses the issues of scientific and technological competency by providing critical thinking training through integrated modules. This on-going research provides a virtual laboratory environment in which the student directs the building of the experiment rather than observing a packaged simulation. SAVL: * Engages the persistent interest of young minds in physics and math by visually linking simulation objects and events with mathematical relations. * Teaches integrated concepts by the hands-on exploration and focused visualization of classic physics experiments within software. * Systematically and uniformly assesses and scores students by their ability to answer their own questions within the context of a Master Question Network. We will demonstrate how the Master Question Network uses polymorphic interfaces and C# lambda expressions to manage simulation objects.

  8. [Quality standards for medical laboratories].

    PubMed

    Pascal, P; Beyerle, F

    2006-07-01

    In France, medical laboratories must engage a quality approach according to the standard guide de bonne exécution des analyses (GBEA) and, for hospital laboratories, according to the Agence nationale d'évaluation en santé (Anaes). Except the GBEA and the Anaes handbook, which are obligatory standards by regulations, the biologists can choose, for a complementary and voluntary quality process, between the standards ISO 9001, ISO 17025 or ISO 15189. Our aim is to shed light on the advantages of these five standards by realizing a comparative study of their requirements. This work enabled us to highlight a great number of similarities and to raise the characteristics of these five standards. According to their objectives, the biologists will choose a recognition of their quality management system with an ISO 9001 certification or a recognition extended to the technical skills with an ISO 17025 or ISO 15189 accreditation. The contents of these last two documents are rather close and both integrate requirements of the standard ISO 9001. The standard ISO 17025 is, at first sight, rather distant from the biological analysis, requiring many efforts of adaptation, just like the ISO 9001 standard. The standard ISO 15189 seems to be well adapted but more constraining seeing the details requirements level needed. It necessitates a perfect control of the preanalytical phase, which is difficult to acquire in a clinical framework where the biological fluids are not taken by the laboratory staff.

  9. Laboratory Studies Towards Understanding Comets

    NASA Astrophysics Data System (ADS)

    Gudipati, Murthy S.; Abou Mrad, Ninette; Blum, Jürgen; Charnley, Steven B.; Chiavassa, Thierry; Cordiner, Martin A.; Mousis, Olivier; Danger, Grégoire; Duvernay, Fabrice; Gundlach, Bastian; Hartogh, Paul; Marboeuf, Ulysse; Simonia, Irakli; Simonia, Tsitsino; Theulé, Patrice; Yang, Rui

    2015-12-01

    This review presents some of the recent advancements in our understanding of comets facilitated by laboratory studies, need for new laboratory simulations, and predictions for future explorations. With the spacecraft Rosetta at the comet 67P/Churyumov-Gerasimenko, a large volume of science data is expected to follow early results that have been published recently. The most surprising of them being hard ice shell that bounced the lander Philae a couple of times before settling on the comet. Long evaded molecular nitrogen has now been detected in the comet 67P/CG. The observed density of 470 kg m^{- 3} is in line with other comet observations, whereas the nature and composition of hydrocarbons detected on the surface are still a puzzle. Observation of D/H ratio that deviates significantly from Earth's water D/H ratio brings back to the table the long-standing question whether or not water on Earth was delivered by comet impacts. Our review summarizes some of the critical laboratory work that helps improve our understanding of cometary interior (whether amorphous or crystalline or containing clathrates), cometary surface (rich of complex organics), cometary coma and tail (D/H ratio, negative ions, and photoluminescence). Outstanding questions are also discussed.

  10. Japanese macaques as laboratory animals.

    PubMed

    Isa, Tadashi; Yamane, Itaru; Hamai, Miya; Inagaki, Haruhisa

    2009-10-01

    The Japanese macaque (Macaca fuscata), along with rhesus and long-tailed macaques, is one of the macaca species. In Japan, it has been preferred for use as a laboratory animal, particularly in the field of neuroscience, because of its high level of intelligence and its gentle nature. In addition, the species has a relatively homogeneous genetic background and field researchers have accumulated abundant information on the social behavior of wild Japanese macaques. As future neuroscience research will undoubtedly be more focused on the higher cognitive functions of the brain, including social behavior among multiple individuals, the Japanese macaque can be expected to become even more valuable as a laboratory animal in the near future. The Ministry of Education, Culture, Sports, Science and Technology has launched a National BioResource Project (NBRP) to establish a stable breeding and supply system for Japanese macaques for laboratory use. The project is in progress and should lead to the establishment of a National Primate Center in Japan, which will support the supply of monkeys as well as social outreach and handling of animal welfare issues.

  11. Laboratory Diagnosis of Bacterial Gastroenteritis

    PubMed Central

    Humphries, Romney M.

    2015-01-01

    SUMMARY Bacterial gastroenteritis is a disease that is pervasive in both the developing and developed worlds. While for the most part bacterial gastroenteritis is self-limiting, identification of an etiological agent by bacterial stool culture is required for the management of patients with severe or prolonged diarrhea, symptoms consistent with invasive disease, or a history that may predict a complicated course of disease. Importantly, characterization of bacterial enteropathogens from stool cultures in clinical laboratories is one of the primary means by which public health officials identify and track outbreaks of bacterial gastroenteritis. This article provides guidance for clinical microbiology laboratories that perform stool cultures. The general characteristics, epidemiology, and clinical manifestations of key bacterial enteropathogens are summarized. Information regarding optimal specimen collection, transport, and processing and current diagnostic tests and testing algorithms is provided. This article is an update of Cumitech 12A (P. H. Gilligan, J. M. Janda, M. A. Karmali, and J. M. Miller, Cumitech 12A, Laboratory diagnosis of bacterial diarrhea, 1992). PMID:25567220

  12. A Networked Desktop Synoptic Laboratory.

    NASA Astrophysics Data System (ADS)

    Ramamurthy, Mohan K.; Bowman, Kenneth P.; Jewett, Brian F.; Kemp, John G.; Kline, Charles

    1992-07-01

    Over the past several years, the Department of Atmospheric Sciences at the University of Illinois has developed a computerized weather laboratory that permits interactive access to real-time data from observing sites around the United States and to output from numerical weather prediction models at the operational centers. Such a setup, with timely access to observations and numerical model forecasts from any networked terminal, personal computer, or workstation, is a valuable tool for education and research in meteorology. The University of Illinois system acts as a real-time, on-line, in-class instructional meteorology laboratory for students. The data-display software is based on the X-windows protocol, which is network transparent and system independent.In addition to software packages distributed by the University Data Project (UNIDATA), software tools developed by the National Center for Supercomputing Applications and the University of Illinois are used to display, animate, and manipulate conventional maps, satellite images, and radar summaries. The underlying idea is to bring every product from a traditional synoptic laboratory to any desktop computer residing on the network.An overview of the University of Illinois prototype for a paperless, desktop synoptic lab, together with the details of the hardware and software involved, is presented here, along with some examples of its use in teaching and research.

  13. Laboratory diagnosis of bacterial meningitis.

    PubMed Central

    Gray, L D; Fedorko, D P

    1992-01-01

    Bacterial meningitis is relatively common, can progress rapidly, and can result in death or permanent debilitation. This infection justifiably elicits strong emotional reactions and, hopefully, immediate medical intervention. This review is a brief presentation of the pathogenesis of bacterial meningitis and a review of current knowledge, literature, and recommendations on the subject of laboratory diagnosis of bacterial meningitis. Those who work in clinical microbiology laboratories should be familiar with the tests used in detecting bacteria and bacterial antigens in cerebrospinal fluid (CSF) and should always have the utmost appreciation for the fact that results of such tests must always be reported immediately. Academic and practical aspects of the laboratory diagnosis of bacterial meningitis presented in this review include the following: anatomy of the meninges; pathogenesis; changes in the composition of CSF; etiological agents; processing CSF; microscopic examination of CSF; culturing CSF; methods of detecting bacterial antigens and bacterial components in CSF (counter-immunoelectrophoresis, coagglutination, latex agglutination, enzyme-linked immunosorbent assay, Limulus amebocyte lysate assay, and gas-liquid chromatography); use of the polymerase chain reaction; and practical considerations for testing CSF for bacterial antigens. PMID:1576585

  14. MDMA effects consistent across laboratories

    PubMed Central

    Kirkpatrick, Matthew G.; Baggott, Matthew J.; Mendelson, John E.; Galloway, Gantt P.; Liechti, Matthias E.; Hysek, Cédric M.; de Wit, Harriet

    2014-01-01

    Rationale Several laboratories have conducted placebo-controlled drug challenge studies with MDMA, providing a unique source of data to examine the reliability of the acute effects of the drug across subject samples and settings. We examined the subjective and physiological responses to the drug across three different laboratories, and investigated the influence of prior MDMA use. Methods Overall, 220 healthy volunteers with varying levels of previous MDMA experience participated in laboratory-based studies in which they received placebo or oral MDMA (1.5 mg/kg or 125 mg fixed dose) under double blind conditions. Cardiovascular and subjective effects were assessed before and repeatedly after drug administration. The studies were conducted independently by investigators in Basel, San Francisco and Chicago. Results Despite methodological differences between the studies and differences in the subjects' drug use histories, MDMA produced very similar cardiovascular and subjective effects across the sites. The participants' prior use of MDMA was inversely related to feeling `Any Drug Effect' only at sites testing more experienced users. Conclusions These data indicate that the pharmacological effects of MDMA are robust and highly reproducible across settings. There was also modest evidence for tolerance to the effects of MDMA in regular users. PMID:24633447

  15. [Quality standards for medical laboratories].

    PubMed

    Pascal, P; Beyerle, F

    2006-07-01

    In France, medical laboratories must engage a quality approach according to the standard guide de bonne exécution des analyses (GBEA) and, for hospital laboratories, according to the Agence nationale d'évaluation en santé (Anaes). Except the GBEA and the Anaes handbook, which are obligatory standards by regulations, the biologists can choose, for a complementary and voluntary quality process, between the standards ISO 9001, ISO 17025 or ISO 15189. Our aim is to shed light on the advantages of these five standards by realizing a comparative study of their requirements. This work enabled us to highlight a great number of similarities and to raise the characteristics of these five standards. According to their objectives, the biologists will choose a recognition of their quality management system with an ISO 9001 certification or a recognition extended to the technical skills with an ISO 17025 or ISO 15189 accreditation. The contents of these last two documents are rather close and both integrate requirements of the standard ISO 9001. The standard ISO 17025 is, at first sight, rather distant from the biological analysis, requiring many efforts of adaptation, just like the ISO 9001 standard. The standard ISO 15189 seems to be well adapted but more constraining seeing the details requirements level needed. It necessitates a perfect control of the preanalytical phase, which is difficult to acquire in a clinical framework where the biological fluids are not taken by the laboratory staff. PMID:16530349

  16. National Laboratories and Internatioanl Partnering

    SciTech Connect

    Eagan, R.J.; Gauster, W.B.; Hartley, D.L.; Jones, G.J.

    1998-12-07

    For nearly fifty years the US held a dominant position in research and development in the free world. The situation has changed dramatically in the last decade. Countries around the world realize that to foster sustainable economic growth, they must build and maintain a foundation in science and technology. The time in which a country could base its gross national product solely on extraction of raw materials or on people-intensive manufacturing is drawing to a close. The funding for research and development has been growing in the rest of the world, while US expenditures have not kept pace. In 1961, the United States funded 71 `?40 of the world's R&D. It is estimated that the US contribution to research and development fimding today has reached the 3 3o/0 level, and will drop to 26o/0 of the world's total by 2003.1 In 1981 US government spending per capita on non-defense research and development was nearly fifty percent above our major competitors; by 2002 it is projected to be f@ percent below them.2 This trend has a profound impact on how research and development institutions in the United States plan for their future technical growth. Sandia National Laboratories, as one of the largest US-government tided research establishments, has been watching this trend for some time. %ndi~ focusing on the Laboratories' missions in nuclear weapons and related defense systems, energy security, environmental integrity, and emerging national challenges, is committed to bringing the best in world-class technology to bear on the nation's problems. We realize maintaining our state-of-the-art technolo=~ base requires we look not only to domestic sources in universities, industries and other laboratories, but also to sources overseas. The realization that we must be "worldwide gatherers of technology" has led Sandia National Laboratories to consider the question of international partnering in some detaiI. As a national laboratory with a national security mission we are well aware

  17. 42 CFR 414.510 - Laboratory date of service for clinical laboratory and pathology specimens.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 3 2013-10-01 2013-10-01 false Laboratory date of service for clinical laboratory... B MEDICAL AND OTHER HEALTH SERVICES Payment for New Clinical Diagnostic Laboratory Tests § 414.510 Laboratory date of service for clinical laboratory and pathology specimens. The date of service for either...

  18. 42 CFR 414.510 - Laboratory date of service for clinical laboratory and pathology specimens.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 3 2014-10-01 2014-10-01 false Laboratory date of service for clinical laboratory... B MEDICAL AND OTHER HEALTH SERVICES Payment for New Clinical Diagnostic Laboratory Tests § 414.510 Laboratory date of service for clinical laboratory and pathology specimens. The date of service for either...

  19. Lawrence Berkeley Laboratory Affirmative Action Program. Revised

    SciTech Connect

    1995-06-01

    The Lawrence Berkeley Laboratory`s Affirmative Action Program (AAP) serves as a working document that describes current policies, practices, and results in the area of affirmative action. It represents the Laboratory`s framework for an affirmative approach to increasing the representation of people of color and women in segments of our work force where they have been underrepresented and taking action to increase the employment of persons with disabilities and special disabled and Vietnam era veterans. The AAP describes the hierarchy of responsibility for Laboratory affirmative action, the mechanisms that exist for full Laboratory participation in the AAP, the policies and procedures governing recruitment at all levels, the Laboratory`s plan for monitoring, reporting, and evaluating affirmative action progress, and a description of special affirmative action programs and plans the Laboratory has used and will use in its efforts to increase the representation and retention of groups historically underrepresented in our work force.

  20. Decommissioning of a tritium-contaminated laboratory

    SciTech Connect

    Harper, J.R.; Garde, R.

    1981-11-01

    A tritium laboratory facility at the Los Alamos National Laboratory, Los Alamos, New Mexico, was decommissioned in 1979. The project involved dismantling the laboratory equipment and disposing of the equipment and debris at an on-site waste disposal/storage area. The laboratory was constructed in 1953 and was in service for tritium research and fabrication of lithium tritide components until 1974. The major features of the laboratory included some 25 meters of gloveboxes and hoods, associated vacuum lines, utility lines, exhaust ducts, electrodryers, blowers, and laboratory benches. This report presents details on the decommissioning, health physics, waste management, environmental surveillance, and costs for the operation.

  1. TRITIUM LABORATORY, TRA666, INTERIOR. INSIDE LABORATORY 102, CAMERA FACING NORTH. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    TRITIUM LABORATORY, TRA-666, INTERIOR. INSIDE LABORATORY 102, CAMERA FACING NORTH. INL NEGATIVE NO. HD46-24-2. Mike Crane, Photographer, 2/2005 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  2. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - MANUFACTURING AND FABRICATION REPAIR LABORATORY AT SANDIA NATIONAL LABORATORIES

    EPA Science Inventory

    These reports summarize pollution prevention opportunity assessments conducted jointly by EPA and DOE at the Geochemistry Laboratory and the Manufacturing and Fabrication Repair Laboratory at the Department of Energy's Sandia National Laboratories facility in Albuquerque, New Mex...

  3. Definition of experiments and instruments for a communication/navigation research laboratory. Volume 3: Laboratory descriptions

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The following study objectives are covered: (1) identification of major laboratory equipment; (2) systems and operations analysis in support of the laboratory design; and (3) conceptual design of the comm/nav research laboratory.

  4. Undergraduate Laboratory for Surface Science

    NASA Astrophysics Data System (ADS)

    Okumura, Mitchio; Beauchamp, Jesse L.; Dickert, Jeffrey M.; Essy, Blair R.; Claypool, Christopher L.

    1996-02-01

    Surface science has developed into a multidisciplinary field of research with applications ranging from heterogeneous catalysis to semiconductor etching (1). Aspects of surface chemistry are now included in physical chemistry textbooks (2) and undergraduate curricula (3), but the perceived cost and complexity of equipment has deterred the introduction of surface science methods in undergraduate laboratories (4). Efforts to expose chemistry undergraduates to state-of-the-art surface instrumentation have just begun (5). To provide our undergraduates with hands-on experience in using standard techniques for characterizing surface morphology, adsorbates, kinetics, and reaction mechanisms, we have developed a set of surface science experiments for our physical chemistry laboratory sequence. The centerpiece of the laboratory is an ultrahigh vacuum (UHV) chamber for studies of single crystal surfaces. This instrument, shown in the figure, has surface analysis capabilities including low energy electron diffraction (LEED), Auger spectroscopy, and temperature-programmed desorption (TPD). The laboratory exercises involve experiments on the well-studied Pt(111) surface. Students prepare a previously mounted single crystal sample by sputtering it with an argon ion gun and heating it under O2. Electron diffraction patterns from the cleaned surface are then obtained with a reverse view LEED apparatus (Princeton Instruments). Images are captured by a charge-coupled device (CCD) camera interfaced to a personal computer for easy downloading and subsequent analysis. Although the LEED images from a Pt(111) surface can be readily interpreted using simple diffraction arguments, this lab provides an excellent context for introducing Miller indices and reciprocal lattices (6). The surface chemical composition can be investigated by Auger spectroscopy, using the LEED apparatus as a simple energy analyzer. The temperature programmed desorption experiment, which is nearly complete, will be

  5. District, state or regional veterinary diagnostic laboratories.

    PubMed

    Gosser, H S; Morehouse, L G

    1998-08-01

    The district, regional or state laboratory is the local laboratory to which veterinarian practitioners usually submit samples, and consequently these laboratories are usually the first to observe a suspected disease problem. In most countries, these laboratories are under the jurisdiction of the State or region in which they are located. In the United States of America (USA), most veterinary diagnostic laboratories are State-associated and operate under the aegis of either the State Department of Agriculture or a university. The national laboratory provides reference assistance to the State laboratories. In the USA, the national Laboratory (the National Veterinary Services Laboratories) acts as a consultant to confirm difficult diagnoses and administer performance tests for State-associated laboratories. District, state or regional laboratories need to share information regarding technological advances in diagnostic procedures. This need was met in the USA by the formation of the American Association of Veterinary Laboratory Diagnosticians (AAVLD) in the late 1950s. Another requirement of district, state or regional diagnostic laboratories is a method to confirm quality assurance, which was fulfilled in the USA by an accreditation programme established through the AAVLD. The Accreditation Committee evaluates laboratories (on request) in terms of organisation, personnel, physical facilities and equipment, records, finance and budget. Those laboratories which meet the standards as established in the 'Essential Requirements for Accreditation' are given accreditation status, which indicates that they have the expertise and facilities to perform tests on food-producing animals for shipment in national or international commerce and on companion, laboratory or zoo animals. While confidentiality of test records is most important, it is becoming necessary to release certain types of animal disease test information if a country is to participate in the exportation of animals

  6. Active SWIR laboratory testing methodology

    NASA Astrophysics Data System (ADS)

    Webb, Curtis M.; White, Steve; Rich, Brian

    2013-06-01

    Active Short Wave InfraRed (SWIR) imaging presents unique challenges to laboratory testing. It is always important to have laboratory testing that will directly relate to field performance. This paper will present the modeling and corresponding laboratory testing that was developed for these types of systems. The paper will present the modeling that was used to derive the lab metric used for verification testing of the system and provide details into the design of the lab equipment that was necessary to ensure accurate lab testing. The Noise Limited Resolution (NLR) test, first developed for low light imaging systems in the 1960s, serves as the basic lab metric for the evaluation of the active SWIR system. This test serves well for a quick test (go-no go) and is used to evaluate this system during production testing. The test derivation will be described and shown how it relates to the modeling results. The test equipment developed by Santa Barbara InfraRed (SBIR) for this application allows for accurate uniform radiance levels from an integrating sphere for both 1.06um and 1.57um imaging applications. The source has the ability to directly mimic any laser system and can provide pulsed laser source radiation from 20 nanoseconds to 500 nanoseconds resulting in levels from 0.4 to 85 nJ/cm2/sr, peak radiance levels. The light source can be triggered to replicate a laser return at any range from 100m to 100,000m. Additionally, the source provides the ability to output Mid Wave IR (MWIR) illumination through the use of a small extended area IR source in the integrating sphere. This is useful for boresighting the active SWIR sensor with other sensors such as Forward Looking IR (FLIR).

  7. Microgravity Science Laboratory (MSL-1)

    NASA Technical Reports Server (NTRS)

    Robinson, M. B. (Compiler)

    1998-01-01

    The MSL-1 payload first flew on the Space Shuttle Columbia (STS-83) April 4-8, 1997. Due to a fuel cell problem, the mission was cut short, and the payload flew again on Columbia (STS-94) July 1-17, 1997. The MSL-1 investigations were performed in a pressurized Spacelab module and the Shuttle middeck. Twenty-nine experiments were performed and represented disciplines such as fluid physics, combustion, materials science, biotechnology, and plant growth. Four accelerometers were used to record and characterize the microgravity environment. The results demonstrate the range of quality science that can be conducted utilizing orbital laboratories in microgravity.

  8. Laboratory testing for antiphospholipid syndrome.

    PubMed

    Pengo, V; Banzato, A; Bison, E; Denas, G; Zoppellaro, G; Bracco, A; Padayattil Jose, S; Hoxha, A; Ruffatti, A

    2016-05-01

    This is a practical report on laboratory tests for the diagnosis of antiphospholipid syndrome (APS). After a general definition of APS, this study deals with appropriateness and timing in requesting the determination of antiphospholipid (aPL) antibodies. Lupus anticoagulant (LAC), anticardiolipin (aCL), and anti β2-glycoprotein I (aβGPI) are the mandatory tests to be performed, while other tests are not yet validated for clinical use. Interpretation of results is an important discussed issue that implies a close liaison between clinical pathologists and clinicians. Finally, a personal definition of APS according to aPL antibody profile closes the manuscript. PMID:27161602

  9. Aseptic laboratory techniques: plating methods.

    PubMed

    Sanders, Erin R

    2012-05-11

    Microorganisms are present on all inanimate surfaces creating ubiquitous sources of possible contamination in the laboratory. Experimental success relies on the ability of a scientist to sterilize work surfaces and equipment as well as prevent contact of sterile instruments and solutions with non-sterile surfaces. Here we present the steps for several plating methods routinely used in the laboratory to isolate, propagate, or enumerate microorganisms such as bacteria and phage. All five methods incorporate aseptic technique, or procedures that maintain the sterility of experimental materials. Procedures described include (1) streak-plating bacterial cultures to isolate single colonies, (2) pour-plating and (3) spread-plating to enumerate viable bacterial colonies, (4) soft agar overlays to isolate phage and enumerate plaques, and (5) replica-plating to transfer cells from one plate to another in an identical spatial pattern. These procedures can be performed at the laboratory bench, provided they involve non-pathogenic strains of microorganisms (Biosafety Level 1, BSL-1). If working with BSL-2 organisms, then these manipulations must take place in a biosafety cabinet. Consult the most current edition of the Biosafety in Microbiological and Biomedical Laboratories (BMBL) as well as Material Safety Data Sheets (MSDS) for Infectious Substances to determine the biohazard classification as well as the safety precautions and containment facilities required for the microorganism in question. Bacterial strains and phage stocks can be obtained from research investigators, companies, and collections maintained by particular organizations such as the American Type Culture Collection (ATCC). It is recommended that non-pathogenic strains be used when learning the various plating methods. By following the procedures described in this protocol, students should be able to: Perform plating procedures without contaminating media. Isolate single bacterial colonies by the streak

  10. Aid for the Medical Laboratory

    NASA Technical Reports Server (NTRS)

    1986-01-01

    A process for separating chemical compounds in fluids resulted from a Jet Propulsion Laboratory (JPL)/LAPD project. The technique involves pouring a blood or urine sample into an extraction tube where packing material contained in a disposable tube called an "extraction column" absorbs water and spreads the specimen as a thin film, making it easy to identify specific components. When a solvent passes through the packing material, the desired compound dissolves and exits through the tube's bottom stem and is collected. Called AUDRI, Automated Drug Identification, it is commercially produced by Analytichem International which has successfully advanced the original technology.

  11. Aids in designing laboratory flumes

    USGS Publications Warehouse

    Williams, Garnett P.

    1971-01-01

    The upsurge of interest in our environment has caused research and instruction in the flow of water along open channels to become increasingly popular in universities and institutes. This, in turn, has brought a greater demand for properly-designed laboratory flumes. Whatever the reason for your interest, designing and building the flume will take a little preparation. You may choose a pattern exactly like a previous design, or you may follow the more time-consuming method of studying several existing flumes and combine the most desirable features of each.

  12. Aseptic Laboratory Techniques: Plating Methods

    PubMed Central

    Sanders, Erin R.

    2012-01-01

    Microorganisms are present on all inanimate surfaces creating ubiquitous sources of possible contamination in the laboratory. Experimental success relies on the ability of a scientist to sterilize work surfaces and equipment as well as prevent contact of sterile instruments and solutions with non-sterile surfaces. Here we present the steps for several plating methods routinely used in the laboratory to isolate, propagate, or enumerate microorganisms such as bacteria and phage. All five methods incorporate aseptic technique, or procedures that maintain the sterility of experimental materials. Procedures described include (1) streak-plating bacterial cultures to isolate single colonies, (2) pour-plating and (3) spread-plating to enumerate viable bacterial colonies, (4) soft agar overlays to isolate phage and enumerate plaques, and (5) replica-plating to transfer cells from one plate to another in an identical spatial pattern. These procedures can be performed at the laboratory bench, provided they involve non-pathogenic strains of microorganisms (Biosafety Level 1, BSL-1). If working with BSL-2 organisms, then these manipulations must take place in a biosafety cabinet. Consult the most current edition of the Biosafety in Microbiological and Biomedical Laboratories (BMBL) as well as Material Safety Data Sheets (MSDS) for Infectious Substances to determine the biohazard classification as well as the safety precautions and containment facilities required for the microorganism in question. Bacterial strains and phage stocks can be obtained from research investigators, companies, and collections maintained by particular organizations such as the American Type Culture Collection (ATCC). It is recommended that non-pathogenic strains be used when learning the various plating methods. By following the procedures described in this protocol, students should be able to: ● Perform plating procedures without contaminating media. ● Isolate single bacterial colonies by the

  13. Shuttle bioresearch laboratory breadboard simulations

    NASA Technical Reports Server (NTRS)

    Taketa, S. T.

    1975-01-01

    Laboratory breadboard simulations (Tests I and II) were conducted to test concepts and assess problems associated with bioresearch support equipment, facilities, and operational integration for conducting manned earth orbital Shuttle missions. This paper describes Test I and discusses the major observations made in Test II. The tests emphasized candidate experiment protocols and requirements: Test I for biological research and Test II for crew members (simulated), subhuman primates, and radioisotope tracer studies on lower organisms. The procedures and approaches developed for these simulation activities could form the basis for Spacelab simulations and developing preflight integration, testing, and logistics of flight payloads.

  14. Utilization of Educationally Oriented Microcomputer Based Laboratories

    ERIC Educational Resources Information Center

    Fitzpatrick, Michael J.; Howard, James A.

    1977-01-01

    Describes one approach to supplying engineering and computer science educators with an economical portable digital systems laboratory centered around microprocessors. Expansion of the microcomputer based laboratory concept to include Learning Resource Aided Instruction (LRAI) systems is explored. (Author)

  15. Organic Laboratory Experiments: Micro vs. Conventional.

    ERIC Educational Resources Information Center

    Chloupek-McGough, Marge

    1989-01-01

    Presents relevant statistics accumulated in a fall organic laboratory course. Discusses laboratory equipment setup to lower the amount of waste. Notes decreased solid wastes were produced compared to the previous semester. (MVL)

  16. Medical and Clinical Laboratory Technologists and Technicians

    MedlinePlus

    ... examine and identify bacteria and other microorganisms. Molecular biology technologists perform complex protein and nucleic acid tests ... medical laboratory scientist degree, includes courses in chemistry, biology, microbiology, math, and statistics. Coursework emphasizes laboratory skills, ...

  17. HEW to Set Laboratory Safety Standards.

    ERIC Educational Resources Information Center

    Chemical and Engineering News, 1978

    1978-01-01

    Describes Department of Health, Education and Welfare (HEW) proposed guidelines for laboratories using chemical carcinogens. The guidelines are designed to provide protection for laboratory workers and their environment from exposure to all types of carcinogenic agents. (GA)

  18. Procedures For Microbial-Ecology Laboratory

    NASA Technical Reports Server (NTRS)

    Huff, Timothy L.

    1993-01-01

    Microbial Ecology Laboratory Procedures Manual provides concise and well-defined instructions on routine technical procedures to be followed in microbiological laboratory to ensure safety, analytical control, and validity of results.

  19. Next Red Planet Rover: Mars Science Laboratory

    NASA Video Gallery

    Did Mars once have an environment capable of supporting life? NASA's next rover -- the Mars Science Laboratory, or Curiosity, will further unravel that mystery. The rover carries a whole laboratory...

  20. BROOKHAVEN NATIONAL LABORATORY WILDLIFE MANAGEMENT PLAN.

    SciTech Connect

    NAIDU,J.R.

    2002-10-22

    The purpose of the Wildlife Management Plan (WMP) is to promote stewardship of the natural resources found at the Brookhaven National Laboratory (BNL), and to integrate their protection with pursuit of the Laboratory's mission.

  1. Laboratory Applications of the Vortex Tube.

    ERIC Educational Resources Information Center

    Bruno, Thomas J.

    1987-01-01

    Discussed are a brief explanation of the function of the vortex tube and some applications for the chemistry laboratory. It is a useful and inexpensive solution to many small-scale laboratory heating and cooling applications. (RH)

  2. Safety VI: Hazards in Physics Laboratories.

    ERIC Educational Resources Information Center

    Orton, R. J. J.

    1985-01-01

    Summarizes advice from the Laboratory Safeguards Subcommittee of the Association for Science Education related to flames and heat, hazardous chemicals, electricity and dangerous voltages, and mechanical hazards. Knowledge is cited as the key to preventing accidents in physics laboratories. (DH)

  3. Research programs at the Department of Energy National Laboratories. Volume 2: Laboratory matrix

    SciTech Connect

    1994-12-01

    For nearly fifty years, the US national laboratories, under the direction of the Department of Energy, have maintained a tradition of outstanding scientific research and innovative technological development. With the end of the Cold War, their roles have undergone profound changes. Although many of their original priorities remain--stewardship of the nation`s nuclear stockpile, for example--pressing budget constraints and new federal mandates have altered their focus. Promotion of energy efficiency, environmental restoration, human health, and technology partnerships with the goal of enhancing US economic and technological competitiveness are key new priorities. The multiprogram national laboratories offer unparalleled expertise in meeting the challenge of changing priorities. This volume aims to demonstrate each laboratory`s uniqueness in applying this expertise. It describes the laboratories` activities in eleven broad areas of research that most or all share in common. Each section of this volume is devoted to a single laboratory. Those included are: Argonne National Laboratory; Brookhaven National Laboratory; Idaho National Engineering Laboratory; Lawrence Berkeley Laboratory; Lawrence Livermore National Laboratory; Los Alamos National Laboratory; National Renewable Energy Laboratory; Oak Ridge National Laboratory; Pacific Northwest Laboratory; and Sandia National Laboratories. The information in this volume was provided by the multiprogram national laboratories and compiled at Lawrence Berkeley Laboratory.

  4. Educational ultrasound nondestructive testing laboratory.

    PubMed

    Genis, Vladimir; Zagorski, Michael

    2008-09-01

    The ultrasound nondestructive evaluation (NDE) of materials course was developed for applied engineering technology students at Drexel University's Goodwin College of Professional Studies. This three-credit, hands-on laboratory course consists of two parts: the first part with an emphasis on the foundations of NDE, and the second part during which ultrasound NDE techniques are utilized in the evaluation of parts and materials. NDE applications are presented and applied through real-life problems, including calibration and use of the latest ultrasonic testing instrumentation. The students learn engineering and physical principles of measurements of sound velocity in different materials, attenuation coefficients, material thickness, and location and dimensions of discontinuities in various materials, such as holes, cracks, and flaws. The work in the laboratory enhances the fundamentals taught during classroom sessions. This course will ultimately result in improvements in the educational process ["The greater expectations," national panel report, http://www.greaterexpectations.org (last viewed February, 2008); R. M. Felder and R. Brent "The intellectual development of Science and Engineering Students. Part 2: Teaching to promote growth," J. Eng. Educ. 93, 279-291 (2004)] since industry is becoming increasingly reliant on the effective application of NDE technology and the demand on NDE specialists is increasing. NDE curriculum was designed to fulfill levels I and II NDE in theory and training requirements, according to American Society for Nondestructive Testing, OH, Recommended Practice No. SNT-TC-1A (2006).

  5. Energy efficient laboratory fume hood

    DOEpatents

    Feustel, Helmut E.

    2000-01-01

    The present invention provides a low energy consumption fume hood that provides an adequate level of safety while reducing the amount of air exhausted from the hood. A low-flow fume hood in accordance with the present invention works on the principal of providing an air supply, preferably with low turbulence intensity, in the face of the hood. The air flow supplied displaces the volume currently present in the hood's face without significant mixing between the two volumes and with minimum injection of air from either side of the flow. This air flow provides a protective layer of clean air between the contaminated low-flow fume hood work chamber and the laboratory room. Because this protective layer of air will be free of contaminants, even temporary mixing between the air in the face of the fume hood and room air, which may result from short term pressure fluctuations or turbulence in the laboratory, will keep contaminants contained within the hood. Protection of the face of the hood by an air flow with low turbulence intensity in accordance with a preferred embodiment of the present invention largely reduces the need to exhaust large amounts of air from the hood. It has been shown that exhaust air flow reductions of up to 75% are possible without a decrease in the hood's containment performance.

  6. Mobile Energy Laboratory Use Plan

    SciTech Connect

    Not Available

    1989-04-01

    This document provides a framework for the use of four Mobile Energy Laboratories (MELs) by federal agencies. These laboratories are made available by the US Department of Energy Federal Energy Management Program (FEMP) to measure and analyze the efficiency of on-site energy conversion, distribution, and end-use application. The MELs are customized passenger buses converted to provide transportation and storage of sophisticated energy monitoring, auditing, and analysis equipment. The MELs also provide mobile work space for specially trained engineers and technicians. One MEL is currently assigned to each of the following agencies: Department of the Army, Department of the Air Force, Department of the Navy, and Department of Energy. Experience over the past five years has indicated the need for centralized MEL administration, application scheduling, test procedure development, user training, and technical oversight. This need is evidenced by increasing requests for MEL use and the economies available by having trained full-time MEL operators and near continuous MEL operation. Other evidence suggests that a regional, rather than Departmental, administration can reduce the costs of MEL relocation.

  7. Laboratory-produced ball lightning

    NASA Astrophysics Data System (ADS)

    Golka, Robert K., Jr.

    1994-05-01

    For 25 years I have actively been searching for the true nature of ball lightning and attempting to reproduce it at will in the laboratory. As one might expect, many unidentified lights in the atmosphere have been called ball lightning, including Texas Maffa lights (automobile headlights), flying saucers (UFOs), swamp gas in Ann Arbor, Michigan, etc. For 15 years I thought ball lightning was strictly a high-voltage phenomenon. It was not until 1984 when I was short-circuiting the electrical output of a diesel electric railroad locomotive that I realized that the phenomenon was related more to a high current. Although I am hoping for some other types of ball lightning to emerge such as strictly electrostatic-electromagnetic manifestations, I have been unlucky in finding laboratory provable evidence. Cavity-formed plasmodes can be made by putting a 2-inch burning candle in a home kitchen microwave oven. The plasmodes float around for as long as the microwave energy is present.

  8. Environmental enrichment for laboratory rodents.

    PubMed

    Hutchinson, Eric; Avery, Anne; Vandewoude, Sue

    2005-01-01

    Modernization of housing and husbandry techniques for rodents has minimized confounding variables. The result has been vastly improved health maintenance and reproducibility of research findings, advances that have decreased the numbers of animals needed to attain statistically significant results. Even though not all aspects of rodent manipulation have been strictly defined, as housing and handling procedures have become increasingly standardized, many animal care personnel have recognized the lack of complexity of the rodents' environment. Concern for this aspect of animal well-being has led many research facilities to provide "environmental enrichment" for rodents. Additionally, regulatory agencies in the United States and Europe have also been increasingly concerned about this issue relative to laboratory animal husbandry. However, little is known about the influence such husbandry modifications may have on biological parameters. In this article, laws and guidelines relating to rodent enrichment are reviewed, the natural behaviors of select rodent species are discussed, and an overview of widely used types of enrichment in laboratory rodent management is provided. The literature evaluating effects of rodent enrichment is reviewed both in terms of neurological development and as an experimental variable, and results of a study evaluating the effect of enrichment on immune and physiological parameters are reported. Survey data on current enrichment practices in a large multi-institutional organization are presented, and practical aspects requiring consideration when devising a rodent enrichment program are discussed.

  9. Eta Carinae: an Astrophysical Laboratory

    NASA Astrophysics Data System (ADS)

    Nielsen, Krister E.; Gull, Theodore R.

    2009-05-01

    Eta Carinae provides a unique example to investigate a massive star in a late evolutionary phase and how CNO-processed material is ejected and mixed with the interstellar medium. The absorbing gas surrounding Eta Carinae (η Car) shows similar characteristics to the intervening gas in spectra of gamma ray burst progenitors. Consequently, the η Car spectrum may provide clues about the nature of other extreme objects such as hypernovae and supernova impostors. In the 1840s, η Car underwent a massive ejection, which was repeated to a lesser extent in the 1890s. Today we see the Homunculus, a bipolar expanding neutral shell, and the Little Homunculus, an interior, spectroscopically time-variable, ionized structure. The η Car system is ideal as a laboratory for absorption and emission line spectroscopy. In the line-of-sight towards η Car, multiple narrow absorption lines are observed from environments with densities around 107 cm- 3 and temperatures ranging from 60 to 7000 K. Thousands of neutral/singly ionized metal lines are identified, in addition to molecular lines in species such as H2, CH, OH and NH. The input from the laboratory spectroscopy community has furthered the analysis of η Car. Future observations of η Car in the infrared through radio wavelength region will enable new detections of atomic and molecular transitions, most notably of hydrides and nitrides. We will demonstrate how experimentally derived atomic data have improved our spectral analysis, and illuminate where future work is needed.

  10. Laboratory Measurements of Celestial Solids

    NASA Technical Reports Server (NTRS)

    Sievers, A. J.; Beckwith, S. V. W.

    1997-01-01

    Our experimental study has focused on laboratory measurements of the low temperature optical properties of a variety of astronomically significant materials in the infrared and mm-wave region of the spectrum. Our far infrared measurements of silicate grains with an open structure have produced a variety of unusual results: (1) the low temperature mass opacity coefficient of small amorphous 2MgO(central dot)SiO2 and MgO(central dot)2SiO2 grains are many times larger than the values previously used for interstellar grain material; (2) all of the amorphous silicate grains studied possess the characteristic temperature dependent signature associated with two level systems in bulk glass; and (3) a smaller but nonzero two level temperature dependence signature is also observed for crystalline particles, its physical origin is unclear. These laboratory measurements yield surprisingly large and variable values for the mm-wave absorption coefficients of small silicate particles similar to interstellar grains, and suggest that the bulk absorptivity of interstellar dust at these long wavelengths will not be well known without such studies. Furthermore, our studies have been useful to better understand the physics of the two level absorption process in amorphous and crystalline grains to gain confidence in the wide applicability of these results.

  11. Laboratory and Space Plasma Studies

    NASA Astrophysics Data System (ADS)

    Hyman, Ellis

    1996-08-01

    The work performed by Science Applications International Corporation (SAIC), encompasses a wide range of topics in experimental, computational, and analytical laboratory and space plasma physics. The accomplishments described in this report have been in support of the programs of the Laser Plasma Branch (Code 6730) and other segments of the Plasma Physics Division at the Naval Research Laboratory (NRL) and cover the period 27 September 1993 to August 1, 1996. SAIC's efforts have been supported by sub-contracts or consulting agreements with Pulse Sciences, Inc., Clark Richardson, and Biskup Consulting Engineers, Pharos Technical Enterprises, Plex Corporation, Cornell University, Stevens Institute of Technology, the University of Connecticut, Plasma Materials and Technologies, Inc., and GaSonics International, Inc. In the following discussions section we will describe each of the topics investigated and the results obtained. Much of the research work has resulted in journal publications and NRL Memorandum Reports in which the investigation is described in detail. These reports are included as Appendices to this Final Report.

  12. Analytical laboratory quality control charting

    SciTech Connect

    O'Bryan, Ervin F.

    2001-06-11

    In life the importance of setting goals is stressed. The desired end result must be envisioned to chart a path and determine indicators to provide feedback on the process. Quality does not happen by accident but is achieved through a constant process of setting goals, process development, monitoring process indicators, fine tuning the process, and achieving results. These goals are to be focused and clearly measurable. In industry and life the setting of goals with clear process indicators is often difficult because of the variable end result and scarcity of measurements. Laboratories are fortunate in that they have a plethora of measurements with known or desired end results (controls) to monitor the process and give instantaneous feedback on quality. A key quality tool used by the laboratory to monitor and evaluate the lab processes is control charting. When properly utilized Quality Control (QC) Charts allow labs to be proactive in addressing problems rather than reactive. Several methods are available for control charting and some are listed in the references/information sources. The content for this paper is based on the control-charting program utilized at the Department of Energy's Fernald site. This control-charting program has specific areas of emphasis, simple charts, trend analyses, and effective follow-up.

  13. Purdue Rare Isotope Measurement Laboratory

    NASA Astrophysics Data System (ADS)

    Caffee, M.; Elmore, D.; Granger, D.; Muzikar, P.

    2002-12-01

    The Purdue Rare Isotope Measurement Laboratory (PRIME Lab) is a dedicated research and service facility for accelerator mass spectrometry. AMS is an ultra-sensitive analytical technique used to measure low levels of long-lived cosmic-ray-produced and anthropogenic radionuclides, and rare trace elements. We measure 10Be (T1/2 = 1.5 My), 26Al (.702 My), 36Cl (.301 My), and 129I (16 My), in geologic samples. Applications include dating the cosmic-ray-exposure time of rocks on Earth's surface, determining rock and sediment burial ages, measuring the erosion rates of rocks and soils, and tracing and dating ground water. We perform sample preparation and separation chemistries for these radio-nuclides for our internal research activities and for those external researchers not possessing this capability. Our chemical preparation laboratories also serve as training sites for members of the geoscience community developing these techniques at their institutions. Research at Purdue involves collaborators among members of the Purdue Departments of Physics, Earth and Atmospheric Sciences, Chemistry, Agronomy, and Anthropology. We also collaborate and serve numerous scientists from other institutions. We are currently in the process of modernizing the facility with the goals of higher precision for routinely measured radio-nuclides, increased sample throughput, and the development of new measurement capabilities for the geoscience community.

  14. The world deep underground laboratories

    NASA Astrophysics Data System (ADS)

    Bettini, A.

    2012-09-01

    This paper is an introduction to a series of coordinated articles of an EPJ Plus Focus Point on underground physics laboratories, written by the directors of the larger ones and by the coordinators of the principal new projects. The paper is largely based on the text of my lecture Perspectives of underground physics, given at the Enrico Fermi Varenna International School, Course CLXXXII (2011), Neutrino physics and astrophysics, reproduced here by permission of the Italian Physical Society. Underground laboratories provide the low radioactive background environment necessary to explore the highest energy scales that cannot be reached with accelerators, by searching for extremely rare phenomena. Experiments range from the direct search of the dark-matter particles that constitute the largest fraction of matter in the Universe, to the exploration of the properties of the neutrinos, the most elusive of the known particles and which might be particle and antiparticle at the same time, to the investigation on why our universe contains only matter and almost no antimatter, and much more.

  15. International aspects of Oak Ridge National Laboratory

    SciTech Connect

    Trivelpiece, A.W.

    1990-01-01

    The national laboratories of the Department of Energy can rightly claim to be called international laboratories because of their role in international research and development activities. These laboratories have staff that pursue internationally acclaimed research with both national and international colleagues and have facilities that support these endeavors.

  16. Harmonization of Clinical Laboratory Test Results.

    PubMed

    2016-02-01

    Clinical laboratory testing is now a global activity with laboratories no longer working in isolation but as regional and national networks, and often at international levels. We now have all of the electronic gadgetry via internet technology at our fingertips to rapidly and accurately measure and report on laboratory testing but are our test results harmonized? PMID:27683501

  17. BASIC STEPS IN DESIGNING SCIENCE LABORATORIES.

    ERIC Educational Resources Information Center

    WHITNEY, FRANK L.

    PLANNERS OF CURRENT UNIVERSITY LABORATORIES OFTEN MAKE THE SAME MISTAKES MADE BY INDUSTRIAL LABORATORIES 20 YEARS AGO. THIS CAN BE REMEDIED BY INCREASED COMMUNICATION BETWEEN SCIENTISTS AND DESIGNERS IN SEMINARS DEFINING THE BASIC NEEDS OF A PARTICULAR LABORATORY SITUATION. ELECTRONIC AND MECHANICAL EQUIPMENT ACCOUNT FOR OVER 50 PER CENT OF TOTAL…

  18. Protein Laboratories in Single Location | Poster

    Cancer.gov

    By Andrew Stephen, Timothy Veenstra, and Gordon Whiteley, Guest Writers, and Ken Michaels, Staff Writer The Laboratory of Proteomics and Analytical Technologies (LPAT), Antibody Characterization Laboratory (ACL), and Protein Chemistry Laboratory (PCL), previously located on different floors or in different buildings, are now together on the first floor of C wing in the ATRF.

  19. Physics 152 Laboratory Manual, 8th Edition.

    ERIC Educational Resources Information Center

    MacIssac, Dan; And Others

    This document is the laboratory manual for the Physics 152 course at Purdue University. It includes a laboratory introduction, hardware and software guide, and laboratory report guide. Labs include: (1) "Measurement Uncertainty and Propagation"; (2) "Introduction to Computer Data Acquisition and Relationships between Position, Velocity, and…

  20. Harmonization of Clinical Laboratory Test Results

    PubMed Central

    2016-01-01

    EDITORIAL Clinical laboratory testing is now a global activity with laboratories no longer working in isolation but as regional and national networks, and often at international levels. We now have all of the electronic gadgetry via internet technology at our fingertips to rapidly and accurately measure and report on laboratory testing but are our test results harmonized? PMID:27683501