Science.gov

Sample records for 1990-2001 emission inventories

  1. NARSTO EMISSION INVENTORY ASSESSMENT

    EPA Science Inventory

    The NARSTO Ozone and Particulate Matter Assessments emphasized that emission inventories are critical to the success of air quality management programs and that emissions inventories in Canada, Mexico, and the United States need improvement to meet expectations for quality, timel...

  2. NARSTO EMISSION INVENTORY ASSESSMENT

    EPA Science Inventory

    The NARSTO Emission Inventory Committee has been pursuing enhancement of the emission inventory program for North American countries--Canada, Mexico, and the United States. With the completion of the NARSTO Ozone and Particulate Matter Assessments, it was recognized that emissio...

  3. NARSTO EMISSION INVENTORY WORKSHOP & ASSESSMENT

    EPA Science Inventory

    This presentation summarizes the NARSTO activities related to emission inventories in 2003-2005. The NARSTO Particulate Matter Assessment, issued in 2003, identified emission inventories as one of the critical elements of the air quality program which needs improvement if it i...

  4. Global emissions inventories

    SciTech Connect

    Dignon, J.

    1995-07-01

    Atmospheric chemistry determines the concentrations of most of the important greenhouse gases except for carbon dioxide. The rate of removal of the greenhouse gases from the atmosphere is also controlled by atmospheric chemistry. The indirect effects of chemical forcing resulting from the chemical interactions of other species can also affect the concentrations of radiatively important gases such as ozone. In order to establish the contribution of any possible climatic change attributable to individual greenhouse gases, spatially and temporally resolved estimates of their emissions need to be established. Unfortunately, for most of the radiatively important species the global magnitudes of their individual fluxes are not known to better than a factor of two and their spatial distributions are even more poorly characterized. Efforts to estimate future projections of potential impacts and to monitor international agreements will require continued research to narrow the uncertainties of magnitude and geographical distribution of emissions.

  5. GHGs emission inventory in Slovakia

    SciTech Connect

    Mareckova, K.

    1996-12-31

    The results of Country Study project in Slovakia are presented. The gases included in the inventory are CO{sub 2}, CH{sub 4}, and N{sub 2}O. While the combustion of fossil fuels accounts for about 96 percent of total Slovak carbon dioxide emissions, CO{sub 2} also results directly from industrial processes. The most relevant industrial activities in Slovakia leading to CO{sub 2} emissions were cement, magnesit, and coke production. The total CO{sub 2} emissions estimated in 1990 were 60 018 Gg and 43 449 Gg in 1994. In the forestry and land use category the net CO{sub 2} flux is estimated to have been a removal. The main sources of methane emissions are livestock, natural gas distribution networks and landfills. Total CH{sub 4} emission in 1990 were estimated to be 387 Gg respectively 315 Gg in 1994. Compared to the other GHGs the emissions of N{sub 2}O are not fully understood. The main sources are expected to be agriculture soils and waste water treatment. The 21 Gg (13.5 Gg in 1994) estimated emission is still very preliminary. To evaluate the share of different GHGs and sectors, the aggregated emissions were estimated. In the year 1990 CO{sub 2} emissions amount to 79%, CH{sub 4} emissions amount to 12%, and N{sub 2}O emissions amount to 9% of total emissions, respectively 78%, 14% and 8% in 1994.

  6. Emission Inventories and Projections

    SciTech Connect

    Streets, D. G.; van Aardenne, John; Battye, Bill; Garivait, Savitri; Grano, D.; Guenther, Alex; Klimont, Z.; Lamarque, Jean-Francois; Lu, Zifeng; Maenhout, Greet; Ohara, Toshimasa; Parrish, David J.; Smith, Steven J.; Vallack, Harry

    2011-04-21

    When the Executive Body to the Convention on Long-range Transboundary Air Pollution took the decision to establish the Task Force on Hemispheric Transport of Air Pollution (TF HTAP) in December 2004, it was on the basis of a growing understanding of the issues surrounding the hemispheric and intercontinental transport of air pollutants. It was recognised that whilst current regional emissions on their own created pollution levels that exceeded internationally-agreed air quality objectives, hemispheric transport could exacerbate local and regional air quality problems.Two particular pollutants of concern, and the focus of this report, are ozone and particulate matter (PM), known for their detrimental impacts on human health (these impacts and others are described in Chapter 5). There was well-documented evidence for the intercontinental transport of ozone and PM but, at that time, the significance of this intercontinental influence on the design of air pollution control policies was not well understood. The European Union, in drawing up its Thematic Strategy on Clean Air for Europe during 2004, became aware of the significance of intercontinental transport and the importance of sources of pollution beyond its borders and sphere of influence, in meeting its air quality goals.

  7. 40 CFR 52.1125 - Emission inventories.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Emission inventories. 52.1125 Section...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Massachusetts § 52.1125 Emission inventories... emission inventories for the Springfield nonattainment area and the Massachusetts portion of the...

  8. 40 CFR 52.1125 - Emission inventories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false Emission inventories. 52.1125 Section...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Massachusetts § 52.1125 Emission inventories... emission inventories for the Springfield nonattainment area and the Massachusetts portion of the...

  9. 40 CFR 52.384 - Emission inventories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 3 2011-07-01 2011-07-01 false Emission inventories. 52.384 Section 52...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Connecticut § 52.384 Emission inventories. (a) The Governor's designee for the State of Connecticut submitted the 1990 base year emission inventories for...

  10. 40 CFR 52.993 - Emissions inventories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 3 2011-07-01 2011-07-01 false Emissions inventories. 52.993 Section...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Louisiana § 52.993 Emissions inventories. (a) The Governor of the State of Louisiana submitted the 1990 base year emission inventories for the Baton...

  11. 40 CFR 52.1036 - Emission inventories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Implementation Plan (SIP). The 2002 base year emission inventory requirement of 40 CFR 51.915 has been satisfied... 40 Protection of Environment 4 2011-07-01 2011-07-01 false Emission inventories. 52.1036 Section...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maine § 52.1036 Emission inventories. (a)...

  12. Air Emission Inventory for the INEEL -- 1999 Emission Report

    SciTech Connect

    Zohner, Steven K

    2000-05-01

    This report presents the 1999 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradionuclide emissions estimates for stationary sources.

  13. 40 CFR 52.1391 - Emission inventories.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) The Governor of the State of Montana submitted the 1990 carbon monoxide base year emission inventories... Governor submitted the 1990 carbon monoxide base year emission inventory for Great Falls on April 23, 1997...-road sources. These 1990 base year carbon monoxide inventories satisfy the nonattainment...

  14. 40 CFR 52.1391 - Emission inventories.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) The Governor of the State of Montana submitted the 1990 carbon monoxide base year emission inventories... Governor submitted the 1990 carbon monoxide base year emission inventory for Great Falls on April 23, 1997...-road sources. These 1990 base year carbon monoxide inventories satisfy the nonattainment...

  15. 40 CFR 52.1391 - Emission inventories.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) The Governor of the State of Montana submitted the 1990 carbon monoxide base year emission inventories... Governor submitted the 1990 carbon monoxide base year emission inventory for Great Falls on April 23, 1997...-road sources. These 1990 base year carbon monoxide inventories satisfy the nonattainment...

  16. 40 CFR 52.1391 - Emission inventories.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) The Governor of the State of Montana submitted the 1990 carbon monoxide base year emission inventories... Governor submitted the 1990 carbon monoxide base year emission inventory for Great Falls on April 23, 1997...-road sources. These 1990 base year carbon monoxide inventories satisfy the nonattainment...

  17. 40 CFR 52.1391 - Emission inventories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) The Governor of the State of Montana submitted the 1990 carbon monoxide base year emission inventories... Governor submitted the 1990 carbon monoxide base year emission inventory for Great Falls on April 23, 1997...-road sources. These 1990 base year carbon monoxide inventories satisfy the nonattainment...

  18. 40 CFR 52.993 - Emissions inventories.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... inventories are for the ozone precursors which are volatile organic compounds, nitrogen oxides, and carbon... submitted a revision to the 1990 base year volatile organic compound (VOC) emissions inventory for the Baton... revision to the 1990 base year volatile organic compound (VOC) emissions inventory for the Baton...

  19. Monitoring the progress of emission inventories

    SciTech Connect

    Levy, J.A. Jr.; Solomon, D.; Husk, M.; Irving, B.; Kruger, D.; Levin. L.

    2006-12-15

    This issue of EM contains three articles which focus on the latest improvements on the emissions inventory process. The first, 'Building the national emissions inventory: challenges and plans for improvements' by Doug Solomon and Martin Husk (pages 8-11), looks at the US national emissions inventory. The next, 'Greenhouse gas inventories - a historical perspective and assessment of improvements since 1990' by Bill Irving and Dina Kruger (pages 12-19) assesses improvements in national and international greenhouse gas emissions inventories over the last 15 years. The third article, 'The global mercury emissions inventory' by Leonard Levin (pages 20-25) gives an overview of the challenges associated with conducting a worldwide inventory of mercury emissions.

  20. 40 CFR 52.1036 - Emission inventories.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Implementation Plan (SIP). The 2002 base year emission inventory requirement of 40 CFR 51.915 has been satisfied... satisfied for these areas. (b) The inventory is for the ozone precursors which are volatile...

  1. Emission Characterization and Emission Inventories for the 21st Century

    EPA Science Inventory

    Emission inventories are the foundation of cost-effective air quality management strategies. A goal of the emissions community is to develop the ultimate emission inventory which would include all significant emissions from all sources, time periods and areas, with quantified un...

  2. 40 CFR 52.1036 - Emission inventories.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Implementation Plan (SIP). The 2002 base year emission inventory requirement of 40 CFR 51.915 has been satisfied... Cumberland, Sagadahoc and York Counties. The Hancock and Waldo Counties nonattainment area is classified as... submitted a 2002 base year emission inventory for Cumberland, Sagadahoc, and York counties, to...

  3. 40 CFR 52.1036 - Emission inventories.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Implementation Plan (SIP). The 2002 base year emission inventory requirement of 40 CFR 51.915 has been satisfied... Cumberland, Sagadahoc and York Counties. The Hancock and Waldo Counties nonattainment area is classified as... submitted a 2002 base year emission inventory for Cumberland, Sagadahoc, and York counties, to...

  4. 40 CFR 52.2086 - Emission inventories.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Emission inventories. 52.2086 Section...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Rhode Island § 52.2086 Emission inventories. (a) The Governor's designee for the State of Rhode Island submitted the 1990 base year...

  5. 40 CFR 52.2086 - Emission inventories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false Emission inventories. 52.2086 Section...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Rhode Island § 52.2086 Emission inventories. (a) The Governor's designee for the State of Rhode Island submitted the 1990 base year...

  6. 40 CFR 52.1533 - Emission inventories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false Emission inventories. 52.1533 Section...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) New Hampshire § 52.1533 Emission inventories. (a) The Governor's designee for the State of New Hampshire submitted a 1990 base year...

  7. 40 CFR 52.1533 - Emission inventories.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Emission inventories. 52.1533 Section...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) New Hampshire § 52.1533 Emission inventories. (a) The Governor's designee for the State of New Hampshire submitted a 1990 base year...

  8. How to conduct an emissions inventory

    SciTech Connect

    Topazio, R.J.

    1994-07-01

    An inventory will quantify emissions through source identification, extensive data gathering, research, process investigation, emission rate calculation and control equipment efficiency determination. For most facilities, a proper inventory will take six months to complete. Add that to the time it will take to prepare the permit application and it becomes evident that action needs to be taken now. Deadlines for submitting Title V operating permit applications to state agencies are right around the corner. This paper describes the process of conducting an emissions inventory.

  9. 40 CFR 52.384 - Emission inventories.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... volatile organic compounds, nitrogen oxides, and carbon monoxide. The inventories covers point, area, non... Governor's designee for the State of Connecticut submitted the 1990 base year emission inventories for the... Hartford serious ozone nonattainment area on January 13, 1994 as revisions to the State's SIP. Revisions...

  10. 40 CFR 52.2350 - Emission inventories.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... are volatile organic compounds, nitrogen oxides, and carbon monoxide, for the Salt Lake and Davis..., 1997, the Governor of Utah submitted the 1993 Carbon Monoxide Periodic Emission Inventories for Ogden... carbon monoxide emissions from stationary point, area, non-road, and on-road mobile sources. (c) On...

  11. 40 CFR 52.2350 - Emission inventories.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... are volatile organic compounds, nitrogen oxides, and carbon monoxide, for the Salt Lake and Davis..., 1997, the Governor of Utah submitted the 1993 Carbon Monoxide Periodic Emission Inventories for Ogden... carbon monoxide emissions from stationary point, area, non-road, and on-road mobile sources. (c) On...

  12. 40 CFR 52.348 - Emission inventories.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... of the State of Colorado submitted the 1990 carbon monoxide base year emission inventories for the... emissions from point, area, on-road mobile, and non-road sources. These 1990 base year carbon monoxide... areas. (b) On September 16, 1997, the Governor of Colorado submitted the 1993 Carbon Monoxide...

  13. 40 CFR 52.2350 - Emission inventories.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... are volatile organic compounds, nitrogen oxides, and carbon monoxide, for the Salt Lake and Davis..., 1997, the Governor of Utah submitted the 1993 Carbon Monoxide Periodic Emission Inventories for Ogden... carbon monoxide emissions from stationary point, area, non-road, and on-road mobile sources. (c) On...

  14. 40 CFR 52.348 - Emission inventories.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... of the State of Colorado submitted the 1990 carbon monoxide base year emission inventories for the... emissions from point, area, on-road mobile, and non-road sources. These 1990 base year carbon monoxide... areas. (b) On September 16, 1997, the Governor of Colorado submitted the 1993 Carbon Monoxide...

  15. 40 CFR 52.348 - Emission inventories.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... of the State of Colorado submitted the 1990 carbon monoxide base year emission inventories for the... emissions from point, area, on-road mobile, and non-road sources. These 1990 base year carbon monoxide... areas. (b) On September 16, 1997, the Governor of Colorado submitted the 1993 Carbon Monoxide...

  16. 40 CFR 52.2350 - Emission inventories.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... are volatile organic compounds, nitrogen oxides, and carbon monoxide, for the Salt Lake and Davis..., 1997, the Governor of Utah submitted the 1993 Carbon Monoxide Periodic Emission Inventories for Ogden... carbon monoxide emissions from stationary point, area, non-road, and on-road mobile sources. (c) On...

  17. 40 CFR 52.2350 - Emission inventories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... are volatile organic compounds, nitrogen oxides, and carbon monoxide, for the Salt Lake and Davis..., 1997, the Governor of Utah submitted the 1993 Carbon Monoxide Periodic Emission Inventories for Ogden... carbon monoxide emissions from stationary point, area, non-road, and on-road mobile sources. (c) On...

  18. 40 CFR 52.348 - Emission inventories.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... of the State of Colorado submitted the 1990 carbon monoxide base year emission inventories for the... emissions from point, area, on-road mobile, and non-road sources. These 1990 base year carbon monoxide... areas. (b) On September 16, 1997, the Governor of Colorado submitted the 1993 Carbon Monoxide...

  19. 40 CFR 52.348 - Emission inventories.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... of the State of Colorado submitted the 1990 carbon monoxide base year emission inventories for the... emissions from point, area, on-road mobile, and non-road sources. These 1990 base year carbon monoxide... areas. (b) On September 16, 1997, the Governor of Colorado submitted the 1993 Carbon Monoxide...

  20. Regional scale evidence for improvements in surface water chemistry 1990-2001.

    PubMed

    Skjelkvåle, B L; Stoddard, J L; Jeffries, D S; Tørseth, K; Høgåsen, T; Bowman, J; Mannio, J; Monteith, D T; Mosello, R; Rogora, M; Rzychon, D; Vesely, J; Wieting, J; Wilander, A; Worsztynowicz, A

    2005-09-01

    The main aim of the international UNECE monitoring program ICP Waters under the Convention of Long-range Transboundary Air Pollution (CLRTAP) is to assess, on a regional basis, the degree and geographical extent of the impact of atmospheric pollution, in particular acidification, on surface waters. Regional trends are calculated for 12 geographical regions in Europe and North America, comprising 189 surface waters sites. From 1990-2001 sulphate concentrations decreased in all but one of the investigated regions. Nitrate increased in only one region, and decreased in three North American regions. Improvements in alkalinity and pH are widely observed. Results from the ICP Waters programme clearly show widespread improvement in surface water acid-base chemistry, in response to emissions controls programs and decreasing acidic deposition. Limited site-specific biological data suggest that continued improvement in the chemical status of acid-sensitive lakes and streams will lead to biological recovery in the future.

  1. Regional scale evidence for improvements in surface water chemistry 1990-2001.

    PubMed

    Skjelkvåle, B L; Stoddard, J L; Jeffries, D S; Tørseth, K; Høgåsen, T; Bowman, J; Mannio, J; Monteith, D T; Mosello, R; Rogora, M; Rzychon, D; Vesely, J; Wieting, J; Wilander, A; Worsztynowicz, A

    2005-09-01

    The main aim of the international UNECE monitoring program ICP Waters under the Convention of Long-range Transboundary Air Pollution (CLRTAP) is to assess, on a regional basis, the degree and geographical extent of the impact of atmospheric pollution, in particular acidification, on surface waters. Regional trends are calculated for 12 geographical regions in Europe and North America, comprising 189 surface waters sites. From 1990-2001 sulphate concentrations decreased in all but one of the investigated regions. Nitrate increased in only one region, and decreased in three North American regions. Improvements in alkalinity and pH are widely observed. Results from the ICP Waters programme clearly show widespread improvement in surface water acid-base chemistry, in response to emissions controls programs and decreasing acidic deposition. Limited site-specific biological data suggest that continued improvement in the chemical status of acid-sensitive lakes and streams will lead to biological recovery in the future. PMID:15944047

  2. The ABAG biogenic emissions inventory project

    NASA Technical Reports Server (NTRS)

    Carson-Henry, C. (Editor)

    1982-01-01

    The ability to identify the role of biogenic hydrocarbon emissions in contributing to overall ozone production in the Bay Area, and to identify the significance of that role, were investigated in a joint project of the Association of Bay Area Governments (ABAG) and NASA/Ames Research Center. Ozone, which is produced when nitrogen oxides and hydrocarbons combine in the presence of sunlight, is a primary factor in air quality planning. In investigating the role of biogenic emissions, this project employed a pre-existing land cover classification to define areal extent of land cover types. Emission factors were then derived for those cover types. The land cover data and emission factors were integrated into an existing geographic information system, where they were combined to form a Biogenic Hydrocarbon Emissions Inventory. The emissions inventory information was then integrated into an existing photochemical dispersion model.

  3. THE 1985 NAPAP EMISSIONS INVENTORY: DEVELOPMENT OF TEMPORAL ALLOCATION FACTORS

    EPA Science Inventory

    The report documents the development and processing of temporal allocation factors for the 1985 National Acid Precipitation Assessment Program (NAPAP) emissions inventory (Version 2). The NAPAP emissions inventory represents the most comprehensive emissions data base available fo...

  4. Methane emissions inventory verification in southern California

    NASA Astrophysics Data System (ADS)

    Hsu, Ying-Kuang; VanCuren, Tony; Park, Seong; Jakober, Chris; Herner, Jorn; FitzGibbon, Michael; Blake, Donald R.; Parrish, David D.

    2010-01-01

    Methane (CH 4) and carbon monoxide (CO) mixing ratios were measured at an air quality monitoring station near the Mt. Wilson (MW) Observatory in southern California starting in the spring of 2007. Diurnal variation and mixing ratio correlation ( R2 = 0.81) were observed. The correlation results observed agree with previous aircraft measurements collected over the greater Los Angeles (LA) metropolitan area. The consistent agreement between CH 4 and CO indicates these gases are well-mixed before reaching the sampling site and the emission source contributions of both compounds are reasonably constant. Since CH 4 and CO are considered non-reactive on the time scale of dispersion within the LA urban area and their emission sources are likely to be similarly distributed (e.g., associated with human activities) they are subject to similar scales of atmospheric transport and dilution. This behavior allows the relationship of CH 4 and CO to be applied for estimation of CH 4 emissions using well-documented CO emissions. Applying this relationship a "top-down" CH 4 inventory was calculated for LA County based on the measurements observed at MW and compared with the California Air Resources Board (CARB) "bottom-up" CH 4 emissions inventory based on the Intergovernmental Panel on Climate Change recommended methodologies. The "top-down" CH 4 emissions inventory is approximately one-third greater than CARB's "bottom-up" inventory for LA County. Considering the uncertainties in both methodologies, the different CH 4 emissions inventory approaches are in good agreement, although some under and/or uninventoried CH 4 sources may exist.

  5. Evaluating Global Emission Inventories of Biogenic Bromocarbons

    NASA Technical Reports Server (NTRS)

    Hossaini, Ryan; Mantle, H.; Chipperfield, M. P.; Montzka, S. A.; Hamer, P.; Ziska, F.; Quack, B.; Kruger, K.; Tegtmeier, S.; Atlas, E.; Sala, S.; Engel, A.; Bonisch, H.; Keber, T.; Oram, D.; Mills, G.; Ordonez, C.; Saiz-Lopez, A.; Warwick, N.; Liang, Q.; Feng, W.; Moore, F.; Miller, F.; Marecal, V.; Richards, N. A. D.; Dorf, M.; Pfeilsticker, K.

    2013-01-01

    Emissions of halogenated very short-lived substances (VSLS) are poorly constrained. However, their inclusion in global models is required to simulate a realistic inorganic bromine (Bry) loading in both the troposphere, where bromine chemistry perturbs global oxidizing capacity, and in the stratosphere, where it is a major sink for ozone (O3). We have performed simulations using a 3-D chemical transport model (CTM) including three top-down and a single bottom-up derived emission inventory of the major brominated VSLS bromoform (CHBr3) and dibromomethane (CH2Br2). We perform the first concerted evaluation of these inventories, comparing both the magnitude and spatial distribution of emissions. For a quantitative evaluation of each inventory, model output is compared with independent long-term observations at National Oceanic and Atmospheric Administration (NOAA) ground-based stations and with aircraft observations made during the NSF (National Science Foundation) HIAPER Pole-to-Pole Observations (HIPPO) project. For CHBr3, the mean absolute deviation between model and surface observation ranges from 0.22 (38 %) to 0.78 (115 %) parts per trillion (ppt) in the tropics, depending on emission inventory. For CH2Br2, the range is 0.17 (24 %) to 1.25 (167 %) ppt. We also use aircraft observations made during the 2011 Stratospheric Ozone: Halogen Impacts in a Varying Atmosphere (SHIVA) campaign, in the tropical western Pacific. Here, the performance of the various inventories also varies significantly, but overall the CTM is able to reproduce observed CHBr3 well in the free troposphere using an inventory based on observed sea-to-air fluxes. Finally, we identify the range of uncertainty associated with these VSLS emission inventories on stratospheric bromine loading due to VSLS (Br(VSLS/y)). Our simulations show Br(VSLS/y) ranges from approximately 4.0 to 8.0 ppt depending on the inventory. We report an optimized estimate at the lower end of this range (approximately 4 ppt

  6. 40 CFR 52.993 - Emissions inventories.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Governor of the State of Louisiana submitted the 1990 base year emission inventories for the Baton Rouge... BTR nonattainment area is classified as Serious and includes Ascension, East Baton Rouge, Iberville, Livingston, Point Coupee, and West Baton Rouge Parishes; the CAL nonattainment area is classified as...

  7. 40 CFR 52.993 - Emissions inventories.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Governor of the State of Louisiana submitted the 1990 base year emission inventories for the Baton Rouge... BTR nonattainment area is classified as Serious and includes Ascension, East Baton Rouge, Iberville, Livingston, Point Coupee, and West Baton Rouge Parishes; the CAL nonattainment area is classified as...

  8. 40 CFR 52.993 - Emissions inventories.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Governor of the State of Louisiana submitted the 1990 base year emission inventories for the Baton Rouge... BTR nonattainment area is classified as Serious and includes Ascension, East Baton Rouge, Iberville, Livingston, Point Coupee, and West Baton Rouge Parishes; the CAL nonattainment area is classified as...

  9. 40 CFR 52.1036 - Emission inventories.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Implementation Plan (SIP). The 2002 base year emission inventory requirement of 40 CFR 51.915 has been satisfied... Lincoln Counties area, the Lewiston and Auburn area, the Portland area, and the Hancock and Waldo Counties area on July 25, 1995 as a revision to the State Implementation Plan (SIP). An amendment to the...

  10. IMPROVE EMISSION INVENTORIES THROUGH ADVANCES IN METHODS AND MODELS

    EPA Science Inventory

    Emission inventories are the foundation of cost-effective air quality management strategies. The emission inventory must be complete, accurate, timely, transparent, and affordable. The general approach is to identify the largest uncertainties that can impact model outputs and a...

  11. EPA RESPONSE TO THE NARSTO EMISSION INVENTORY ASSESSMENT

    EPA Science Inventory

    NARSTO conducted an assessment of emission inventory programs and recommended actions to enhance the accuracy, quality, timeliness, and affordability of emission inventories across Canada, Mexico and the United States. This briefing provides the EPA response to the NARSTO report...

  12. Vision for Future North American Emission Inventory Programs

    EPA Science Inventory

    The NARSTO Ozone and Particulate Matter Assessments emphasized that emission inventories are critical to the success of air quality management programs and that emissions inventories in Canada, Mexico, and the United States need improvement to meet expectations for quality, timel...

  13. Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory - Calendar Year 1998 Emissions Report

    SciTech Connect

    S. K. Zohner

    1999-10-01

    This report presents the 1998 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradiological emissions estimates for stationary sources.

  14. Air emission inventory for the Idaho National Engineering Laboratory: 1994 emissions report

    SciTech Connect

    1995-07-01

    This report Presents the 1994 update of the Air Emission inventory for the Idaho National Engineering Laboratory (INEL). The INEL Air Emission Inventory documents sources and emissions of non-radionuclide pollutants from operations at the INEL. The report describes the emission inventory process and all of the sources at the INEL, and provides non-radionuclide emissions estimates for stationary sources.

  15. Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory - Calendar Year 1999 Emission Report

    SciTech Connect

    Zohner, S.K.

    2000-05-30

    This report presents the 1999 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradionuclide emissions estimates for stationary sources.

  16. GLOBAL INVENTORY OF VOLATILE COMPOUND EMISSIONS FROM ANTHROPOGENIC SOURCES

    EPA Science Inventory

    The report describes a global inventory anthropogenic volatile organic compound (VOC) emissions that includes a separate inventory for each of seven pollutant groups--paraffins, olefins, aromatics, formaldehyde, other aldehydes, other aromatics, and marginally reactive compounds....

  17. Correlates of Alaska Native Fatal and Nonfatal Suicidal Behaviors 1990-2001

    ERIC Educational Resources Information Center

    Wexler, Lisa; Hill, Ryan; Bertone-Johnson, Elizabeth; Fenaughty, Andrea

    2008-01-01

    Factors correlated with suicidal behavior in a predominately Alaska Native region of Alaska are described, and the correlates relating to fatal and nonfatal suicide behaviors in this indigenous population are distinguished. Suicide data from the region (1990-2001) were aggregated and compared to 2000 U.S. Census Data using chi-squared tests.…

  18. INNOVATIVE METHODS FOR EMISSION INVENTORY DEVELOPMENT AND EVALUATION: WORKSHOP SYNTHESIS

    EPA Science Inventory

    Emission inventories are key databases for evaluating, managing, and regulating air pollutants. Refinements and innovations in instruments that measure air pollutants, models that calculate emissions, and techniques for data management and uncertainty assessment are critical to ...

  19. 40 CFR 52.1075 - Base year emissions inventory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false Base year emissions inventory. 52.1075... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maryland § 52.1075 Base year emissions inventory. (a) EPA approves as a revision to the Maryland State Implementation Plan the 1990...

  20. 40 CFR 52.2425 - Base Year Emissions Inventory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 5 2014-07-01 2014-07-01 false Base Year Emissions Inventory. 52.2425... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Virginia § 52.2425 Base Year Emissions Inventory. (a) EPA approves as a revision to the Virginia Implementation Plan the 1990 base...

  1. 40 CFR 52.423 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.423 1990 Base Year Emission Inventory. EPA approves as a revision to the Delaware State Implementation Plan the 1990 base year...

  2. 40 CFR 52.423 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 3 2014-07-01 2014-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.423 1990 Base Year Emission Inventory. EPA approves as a revision to the Delaware State Implementation Plan the 1990 base year...

  3. 40 CFR 52.76 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 3 2014-07-01 2014-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Alaska § 52.76 1990 Base Year Emission Inventory. (a) EPA approves as a revision to the Alaska State Implementation Plan the 1990 Base Year...

  4. 40 CFR 52.76 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 3 2013-07-01 2013-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Alaska § 52.76 1990 Base Year Emission Inventory. (a) EPA approves as a revision to the Alaska State Implementation Plan the 1990 Base Year...

  5. 40 CFR 52.423 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 3 2012-07-01 2012-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.423 1990 Base Year Emission Inventory. EPA approves as a revision to the Delaware State Implementation Plan the 1990 base year...

  6. 40 CFR 52.1075 - Base year emissions inventory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 4 2013-07-01 2013-07-01 false Base year emissions inventory. 52.1075... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maryland § 52.1075 Base year emissions inventory. (a) EPA approves as a revision to the Maryland State Implementation Plan the 1990...

  7. 40 CFR 52.76 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 3 2011-07-01 2011-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Alaska § 52.76 1990 Base Year Emission Inventory. (a) EPA approves as a revision to the Alaska State Implementation Plan the 1990 Base Year...

  8. 40 CFR 52.1075 - Base year emissions inventory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 4 2012-07-01 2012-07-01 false Base year emissions inventory. 52.1075... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maryland § 52.1075 Base year emissions inventory. (a) EPA approves as a revision to the Maryland State Implementation Plan the 1990...

  9. 40 CFR 52.2531 - 1990 base year emission inventory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false 1990 base year emission inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) West Virginia § 52.2531 1990 base... 1990 base year emission inventories for the Greenbrier county ozone nonattainment area submitted by...

  10. 40 CFR 52.474 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 3 2011-07-01 2011-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS District of Columbia § 52.474 1990 Base Year... base year emission inventory for the Washington Metropolitan Statistical Area, submitted by...

  11. 40 CFR 52.2425 - Base Year Emissions Inventory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 5 2012-07-01 2012-07-01 false Base Year Emissions Inventory. 52.2425... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Virginia § 52.2425 Base Year Emissions Inventory. (a) EPA approves as a revision to the Virginia Implementation Plan the 1990 base...

  12. 40 CFR 52.423 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 3 2013-07-01 2013-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.423 1990 Base Year Emission Inventory. EPA approves as a revision to the Delaware State Implementation Plan the 1990 base year...

  13. 40 CFR 52.1075 - Base year emissions inventory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 4 2014-07-01 2014-07-01 false Base year emissions inventory. 52.1075... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maryland § 52.1075 Base year emissions inventory. (a) EPA approves as a revision to the Maryland State Implementation Plan the 1990...

  14. 40 CFR 52.2425 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Virginia § 52.2425 1990 Base Year Emission Inventory. (a) EPA approves as a revision to the Virginia Implementation Plan the 1990 base...

  15. 40 CFR 52.474 - Base Year Emissions Inventory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 3 2014-07-01 2014-07-01 false Base Year Emissions Inventory. 52.474... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS District of Columbia § 52.474 Base Year... base year emission inventory for the Washington Metropolitan Statistical Area, submitted by...

  16. 40 CFR 52.2425 - Base Year Emissions Inventory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 5 2013-07-01 2013-07-01 false Base Year Emissions Inventory. 52.2425... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Virginia § 52.2425 Base Year Emissions Inventory. (a) EPA approves as a revision to the Virginia Implementation Plan the 1990 base...

  17. 40 CFR 52.2531 - Base year emissions inventory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 5 2013-07-01 2013-07-01 false Base year emissions inventory. 52.2531... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) West Virginia § 52.2531 Base year... revision to the West Virginia State Implementation Plan the 1990 base year emission inventories for...

  18. 40 CFR 52.474 - Base Year Emissions Inventory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 3 2012-07-01 2012-07-01 false Base Year Emissions Inventory. 52.474... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS District of Columbia § 52.474 Base Year... base year emission inventory for the Washington Metropolitan Statistical Area, submitted by...

  19. 40 CFR 52.2531 - 1990 base year emission inventory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false 1990 base year emission inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) West Virginia § 52.2531 1990 base... 1990 base year emission inventories for the Greenbrier county ozone nonattainment area submitted by...

  20. 40 CFR 52.76 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Alaska § 52.76 1990 Base Year Emission Inventory. (a) EPA approves as a revision to the Alaska State Implementation Plan the 1990 Base Year...

  1. 40 CFR 52.474 - Base Year Emissions Inventory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 3 2013-07-01 2013-07-01 false Base Year Emissions Inventory. 52.474... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS District of Columbia § 52.474 Base Year... base year emission inventory for the Washington Metropolitan Statistical Area, submitted by...

  2. 40 CFR 52.2531 - 1990 base year emission inventory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 5 2012-07-01 2012-07-01 false 1990 base year emission inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) West Virginia § 52.2531 1990 base... 1990 base year emission inventories for the Greenbrier county ozone nonattainment area submitted by...

  3. 40 CFR 52.2531 - Base year emissions inventory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 5 2014-07-01 2014-07-01 false Base year emissions inventory. 52.2531... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) West Virginia § 52.2531 Base year... base year emission inventories for the Greenbrier county ozone nonattainment area submitted by...

  4. 40 CFR 52.423 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 3 2011-07-01 2011-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.423 1990 Base Year Emission Inventory. EPA approves as a revision to the Delaware State Implementation Plan the 1990 base year...

  5. 40 CFR 52.76 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 3 2012-07-01 2012-07-01 false 1990 Base Year Emission Inventory. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Alaska § 52.76 1990 Base Year Emission Inventory. (a) EPA approves as a revision to the Alaska State Implementation Plan the 1990 Base Year...

  6. 40 CFR 52.1075 - 1990 base year emission inventory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... year stationary, area, off-road mobile and on-road mobile emission inventories in the Baltimore... October 12, 1995. This submittal consist of the 1990 base year stationary, area and off-road mobile and on-road mobile emission inventories in the Washington Statistical Area for the pollutant, carbon...

  7. 40 CFR 52.2425 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... consists of the 1990 base year stationary, area and off-road mobile and on-road mobile emission inventories... December 15, 1994. These submittals consist of the 1990 base year point, area, non-road mobile, biogenic and on-road mobile source emission inventories in each area for the following pollutants:...

  8. 40 CFR 60.25 - Emission inventories, source surveillance, reports.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... electronic documents shall comply with the requirements of 40 CFR part 3—(Electronic reporting). (2) Periodic... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Emission inventories, source... State Plans for Designated Facilities § 60.25 Emission inventories, source surveillance, reports....

  9. 40 CFR 60.25 - Emission inventories, source surveillance, reports.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... electronic documents shall comply with the requirements of 40 CFR part 3—(Electronic reporting). (2) Periodic... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Emission inventories, source... State Plans for Designated Facilities § 60.25 Emission inventories, source surveillance, reports....

  10. 40 CFR 60.25 - Emission inventories, source surveillance, reports.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... electronic documents shall comply with the requirements of 40 CFR part 3—(Electronic reporting). (2) Periodic... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Emission inventories, source... State Plans for Designated Facilities § 60.25 Emission inventories, source surveillance, reports....

  11. Air emissions inventory for the Idaho National Engineering Laboratory -- 1995 emissions report

    SciTech Connect

    1996-06-01

    This report presents the 1995 update of the Air Emission Inventory for the Idaho National Engineering Laboratory (INEL). The INEL Air Emission Inventory documents sources and emissions of non-radionuclide pollutants from operations at the INEL. The report describes the emission inventory process and all of the sources at the INEL, and provides non-radionuclide emissions estimates for stationary sources. The air contaminants reported include nitrogen oxides, sulfur oxides, carbon monoxide, volatile organic compounds, particulates, and hazardous air pollutants (HAPs).

  12. 75 FR 57275 - Information Collection; Supplier Greenhouse Gas Emissions Inventory Pilot

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-20

    ... ADMINISTRATION Information Collection; Supplier Greenhouse Gas Emissions Inventory Pilot AGENCY: Federal... Supplier Greenhouse Gas (GHG) Emissions Inventory pilot. Public comments are particularly invited on... Information Collection 3090- 00XX; Supplier Greenhouse Gas Emissions Inventory Pilot, by any of the...

  13. Air Emission Inventory for the Idaho National Engineering Laboratory, 1993 emissions report

    SciTech Connect

    Not Available

    1994-06-01

    This report presents the 1993 update of the Air Emission Inventory for the Idaho National Engineering Laboratory (INEL). The purpose of the Air Emission Inventory is to commence the preparation of the permit to operate application for the INEL, as required by the recently promulgated Title V regulations of the Clean Air Act. The report describes the emission inventory process and all of the sources at the INEL and provides emissions estimates for both mobile and stationary sources.

  14. DEVELOPMENT AND SELECTION OF AMMONIA EMISSION FACTORS FOR THE 1985 NAPAP EMISSIONS INVENTORY

    EPA Science Inventory

    The report, prepared for the National Acid Precipitation Assessment Program (NAPAP), identifies the most appropriate ammonia (NH3) emission factors available for inclusion in the 1985 NAPAP Emissions Inventory. H3 emission factors developed for several new NAPAP source categories...

  15. Ammonia emission inventory for the state of Wyoming

    SciTech Connect

    Kirchstetter, Thomas W.; Maser, Colette R.; Brown, Nancy J.

    2003-12-17

    Ammonia (NH{sub 3}) is the only significant gaseous base in the atmosphere and it has a variety of impacts as an atmospheric pollutant, including the formation of secondary aerosol particles: ammonium sulfate and ammonium nitrate. NH{sub 3} preferentially forms ammonium sulfate; consequently ammonium nitrate aerosol formation may be limited by the availability of NH{sub 3}. Understanding the impact of emissions of oxides of sulfur and nitrogen on visibility, therefore, requires accurately determined ammonia emission inventories for use in air quality models, upon which regulatory and policy decisions increasingly depend. This report presents an emission inventory of NH{sub 3} for the state of Wyoming. The inventory is temporally and spatially resolved at the monthly and county level, and is comprised of emissions from individual sources in ten categories: livestock, fertilizer, domestic animals, wild animals, wildfires, soil, industry, mobile sources, humans, and publicly owned treatment works. The Wyoming NH{sub 3} inventory was developed using the Carnegie Mellon University (CMU) Ammonia Model as framework. Current Wyoming-specific activity data and emissions factors obtained from state agencies and published literature were assessed and used as inputs to the CMU Ammonia Model. Biogenic emissions from soils comprise about three-quarters of the Wyoming NH{sub 3} inventory, though emission factors from soils are highly uncertain. Published emission factors are scarce and based on limited measurements. In Wyoming, agricultural land, rangeland, and forests comprise 96% of the land area and essentially all of the estimated emissions from soils. Future research on emission rates of NH{sub 3} for these land categories may lead to a substantial change in the magnitude of soil emissions, a different inventory composition, and reduced uncertainty in the inventory. While many NH{sub 3} inventories include annual emissions, air quality modeling studies require finer temporal

  16. THE 1985 NAPAP EMISSIONS INVENTORY: DEVELOPMENT OF SPECIES ALLOCATION FACTORS

    EPA Science Inventory

    The report describes the methodologies and data bases used to develop species allocation factors and data processing software used to develop the 1985 National Acid Precipitation Assessment Program (NAPAP) Modelers' Emissions Inventory (Version 2). Species allocation factors were...

  17. AIR EMISSION INVENTORIES IN NORTH AMERICA: A CRITICAL ASSESSMENT

    EPA Science Inventory

    Although emission inventories are the foundation of air quality management and have supported substantial improvements in North American air quality, they have a number of shortcomings that can potentially lead to ineffective air quality management strategies. New technologies fo...

  18. 40 CFR 52.2086 - Emission inventories.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... precursors which are volatile organic compounds, nitrogen oxides, and carbon monoxide. The inventory covers... volatile organic compounds and nitrogen oxides, and cover point, area, non-road mobile, on-road mobile...

  19. 40 CFR 62.4622 - Emission inventories, source surveillance, reports.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... the general public. (c) Regulation for public availability of emission data. (1) Any person who cannot... 40 Protection of Environment 9 2014-07-01 2014-07-01 false Emission inventories, source surveillance, reports. 62.4622 Section 62.4622 Protection of Environment ENVIRONMENTAL PROTECTION...

  20. 40 CFR 52.474 - 1990 Base Year Emission Inventory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... submittal consist of the 1990 base year stationary, area and off-road mobile and on-road mobile emission... mobile, non-road and biogenic source emission inventories in the area for the following pollutants... consists of amendments to the 1990 base year point, area, highway mobile, and non-road source...

  1. Air Emission, Liquid Effluent Inventory and Reporting

    SciTech Connect

    Chapman, Tina

    1998-08-18

    The IES maintains an inventory of radiological air and liquid effluents released to the atmosphere. The IES utilizes the official stack numbers. Data may be entered by generators for any monitoring time period. Waste volumes released as well as their radiological constituents are tracked. The IES provides data to produce a report for NESHAPS as well as several administrative action/anomaly reports. These reports flag unusual occurences (releases) that are above normal range releases.

  2. An Emission Inventory of Polycyclic Aromatic Hydrocarbons in China

    NASA Astrophysics Data System (ADS)

    Mu, Xilong; Zhu, Xianlei; Wang, Xuesong

    2015-04-01

    Polycyclic Aromatic Hydrocarbons (PAHs) are among the most dangerous compounds due to their high carcinogenic and mutagenic character. Emission inventory provides the primary data to account for the sources of ambient PAHs and server as a necessary database for effective PAHs pollution control. China is experiencing fast economic growth and large energy consumption, which might result in a large amount of PAHs anthropogenic emissions. Therefore, based on the previous studies and combined recently field emission measurements as well as socio-economic activity data, the development of a nationwide PAHs emission inventory is needed. In this work, the emission inventory of 16 PAHs listed as U.S. Environmental Protection Agency priority pollutants in China in the year 2012 is compiled. The emission amounts of PAHs were estimated as annual rates of emission-related activities multiplied by respective emission factors. The activities such as fuel consumption, including fossil fuel and biofuel, and socio-economic statistics were obtained from yearbook released by Chinese central government and/or provincial governments, as well as related industry reports. Emission factors were derived from the related literature. Recently reported emission factors from local measurements were used. The total emissions of PAHs were 120611 ton in 2012. In China, PAHs were emitted predominantly from domestic combustion of coal and biofuel, coking industry and motor vehicles, accounting for 72% of the total amount. PAHs emission profiles were significantly different between China and the other countries. The emission profile in China featured a relatively higher portion of high molecular weight species with carcinogenic potential due to large contributions of domestic combustion and coking industry. Domestic combustion of straw, coal and firewood emitted 19464 ton, 8831 ton, and 5062 ton of PAHs, respectively, which were much higher than those in other countries. Emission per capita showed

  3. International Global Atmospheric Chemistry Programme global emissions inventory activity: Sulfur emissions from volcanoes, current status

    SciTech Connect

    Benkovitz, C.M.

    1995-07-01

    Sulfur emissions from volcanoes are located in areas of volcanic activity, are extremely variable in time, and can be released anywhere from ground level to the stratosphere. Previous estimates of global sulfur emissions from all sources by various authors have included estimates for emissions from volcanic activity. In general, these global estimates of sulfur emissions from volcanoes are given as global totals for an ``average`` year. A project has been initiated at Brookhaven National Laboratory to compile inventories of sulfur emissions from volcanoes. In order to complement the GEIA inventories of anthropogenic sulfur emissions, which represent conditions circa specific years, sulfur emissions from volcanoes are being estimated for the years 1985 and 1990.

  4. Global radioxenon emission inventory based on nuclear power reactor reports.

    PubMed

    Kalinowski, Martin B; Tuma, Matthias P

    2009-01-01

    Atmospheric radioactivity is monitored for the verification of the Comprehensive Nuclear-Test-Ban Treaty, with xenon isotopes 131mXe, 133Xe, 133mXe and 135Xe serving as important indicators of nuclear explosions. The treaty-relevant interpretation of atmospheric concentrations of radioxenon is enhanced by quantifying radioxenon emissions released from civilian facilities. This paper presents the first global radioxenon emission inventory for nuclear power plants, based on North American and European emission reports for the years 1995-2005. Estimations were made for all power plant sites for which emission data were unavailable. According to this inventory, a total of 1.3PBq of radioxenon isotopes are released by nuclear power plants as continuous or pulsed emissions in a generic year.

  5. The Global Emissions Inventory Activity (GEIA)

    NASA Astrophysics Data System (ADS)

    Middleton, P.; Guenther, A. B.; Granier, C.; Mieville, A.

    2010-12-01

    GEIA aims to bring together people, analyses, data, and tools to quantify the anthropogenic emissions and natural exchanges of trace gases and aerosols that drive earth system changes and to facilitate use of this information by the research, assessment and policy communities. This presentation provides an overview of the current activities of GEIA. The GEIA network currently includes over 1000 people around the globe, and the plan is to extend this network to different communities working on environmental changes issues. The GEIA Center (www.geiacenter.org) hosts a comprehensive set of emissions related information, and plans to maintain a new database of scientific papers as well as national and international reports dealing with emissions issues. Conclusions from the recent GEIA conference, held in October 2009, also are summarized. Given the differences often found among data sets, the formation of a GEIA working group composed of emission developers and modelers who will compare data sets and implications for modeling is discussed. It has been recognized that consistent information on emissions at the global and regional scale is required, as well as an accurate quantification of emissions in the different megacities of the world. In order to develop these perspectives, GEIA plans to begin strengthening links with different key regions through creation of regional centers in corporation with other entities and individuals working in these regions.

  6. Inventory of pesticide emissions into the air in Europe

    NASA Astrophysics Data System (ADS)

    Sarigiannis, D. A.; Kontoroupis, P.; Solomou, E. S.; Nikolaki, S.; Karabelas, A. J.

    2013-08-01

    Creation of a reliable and comprehensive emission inventory of the pesticides used in Europe is a key step towards quantitatively assessing the link between actual pesticide exposure and adverse health effects. An inventory of pesticide emissions was generated at a 1 × 1 km grid, for the year 2000. The emission model comprises three components: estimates of active substance (AS) wind drift taking into account crop type, volatilization during pesticide application and volatilization from the crop canopy. Results show that atmospheric emission of pesticides varies significantly across Europe. Different pesticide families are emitted from different parts of Europe as a function of the main crop(s) cultivated, agro-climatic conditions and production intensity. The pesticide emission inventory methodology developed herein is a valuable tool for assessing air quality in rural and peri-urban Europe, furnishing the necessary input for atmospheric modelling at different scales. Its estimates have been tested using global sensitivity and Monte Carlo analysis for uncertainty assessment and they have been validated against national and local surveys in four European countries; the results demonstrate the robustness and reliability of the inventory. The latter may therefore be readily used for exposure and health risk assessment studies targeting farmers, applicators, but also bystanders and the general population in Europe.

  7. Air Emission Inventory for the Idaho National Engineering Laboratory: 1992 emissions report

    SciTech Connect

    Stirrup, T.S.

    1993-06-01

    This report presents the 1992 Air Emission Inventory for the Idaho National Engineering Laboratory. Originally, this report was in response to the Environmental Oversight and Monitoring Agreement in 1989 between the State of Idaho and the Department of Energy Idaho Field Office, and a request from the Idaho Air Quality Bureau. The current purpose of the Air Emission Inventory is to provide the basis for the preparation of the INEL Permit-to-Operate (PTO) an Air Emission Source Application, as required by the recently promulgated Title V regulations of the Clean Air Act. This report includes emissions calculations from 1989 to 1992. The Air Emission Inventory System, an ORACLE-based database system, maintains the emissions inventory.

  8. African anthropogenic combustion emission inventory: specificities and uncertainties

    NASA Astrophysics Data System (ADS)

    Sekou, K.; Liousse, C.; Eric-michel, A.; Veronique, Y.; Thierno, D.; Roblou, L.; Toure, E. N.; Julien, B.

    2015-12-01

    Fossil fuel and biofuel emissions of gases and particles in Africa are expected to significantly increase in the near future, particularly due to the growth of African cities. In addition, African large savannah fires occur each year during the dry season, mainly for socio-economical purposes. In this study, we will present the most recent developments of African anthropogenic combustion emission inventories, stressing African specificities. (1)A regional fossil fuel and biofuel inventory for gases and particulates will be presented for Africa at a resolution of 0.25° x 0.25° from 1990 to 2012. For this purpose, the original database of Liousse et al. (2014) has been used after modification for emission factors and for updated regional fuel consumption including new emitter categories (waste burning, flaring) and new activity sectors (i.e. disaggregation of transport into sub-sectors including two wheel ). In terms of emission factors, new measured values will be presented and compared to litterature with a focus on aerosols. They result from measurement campaigns organized in the frame of DACCIWA European program for each kind of African specific anthropogenic sources in 2015, in Abidjan (Ivory Coast), Cotonou (Benin) and in Laboratoire d'Aérologie combustion chamber. Finally, a more detailed spatial distribution of emissions will be proposed at a country level to better take into account road distributions and population densities. (2) Large uncertainties still remain in biomass burning emission inventories estimates, especially over Africa between different datasets such as GFED and AMMABB. Sensitivity tests will be presented to investigate uncertainties in the emission inventories, applying methodologies used for AMMABB and GFED inventories respectively. Then, the relative importance of each sources (fossil fuel, biofuel and biomass burning inventories) on the budgets of carbon monoxide, nitrogen oxides, sulfur dioxide, black and organic carbon, and volatile

  9. Emissions inventory for the Mexico City Metropolitan Area

    SciTech Connect

    Figueroa, V.H.P.; Renteria, J.S.; Hernandez, C.G.

    1996-12-31

    The emissions inventory bears a broad relationship to the energy balance, reflecting the dependence of the emissions with reference to the use of energy. Actually the consumption of gasoline and diesel fuel in the transport sector represents collectively, the greatest comparative expense of energy and the major contributor of the ozone precursor pollutants HC, NO{sub x} and CO, relative to the total volume of emissions in the Mexico City Metropolitan Area (MCMA). Also, the industrial sector introduces significant emissions of SO{sub 2} and NO{sub x} due to its energy consumption of fuel oils and natural gas. In contrast, the great majority of suspended particulate in the MCMA emanate from degradation processes of surface soil along the periphery of the urban zone. To the federal and local authorities charged with the design of strategies for prevention and control of atmospheric pollution, the emissions inventory is a strategic tool that reflects the relative intensity of the various emitters to the load capacity of the atmosphere. A comprehensive inventory was compiled for 1995, categorizing the emissions generated by four sectors: industry, services, transport and surface soils and vegetation, considering the following pollutants: TSP, SO{sub 2}, NO{sub x}, HC and CO. The combined pollutant emissions are 4,009,628 tons/year of which 3% are generated by the industry, 10% by the services sector, 75% by the transport sector, and 12% by surface soils and vegetation.

  10. Global Commercial Aviation Emissions Inventory for 2004

    NASA Astrophysics Data System (ADS)

    Wilkerson, J.; Balasubramanian, S.; Malwitz, A.; Wayson, R.; Fleming, G.; Jacobson, M. Z.; Naiman, A.; Lele, S.

    2008-12-01

    In 2004, the global commercial aircraft fleet included more than 13,000 aircraft flying over 30 billion km, burning more than 100 million tons of fuel. All this activity incurs substantial amounts of fossil-fuel combustion products at the cruise altitude within the upper troposphere and lower stratosphere that could potentially affect the atmospheric composition and climate. These emissions; such as CO, CO2, PM, NOx, SOx, are not distributed uniformly over the earth, so understanding the temporal and spatial distributions is an important component for modeling aviation climate impacts. Previous studies for specific years have shown that nearly all activity occurs in the northern hemisphere, and most is within mid-latitudes. Simply scaling older data by the annual global industry growth of 3-5 percent may provide emission trends which are not representative of geographically varying growth in aviation sector that has been noted over the past years. India, for example, increased its domestic aviation activity recently by 46 percent in one year. Therefore, it is important that aircraft emissions are best characterized and represented in the atmospheric models for impacts analysis. Data containing all global commercial flights for 2004 was computed using the Federal Aviation Administration's Aviation Environmental Design Tool (AEDT) and provided by the Volpe National Transportation Systems Center. The following is a summary of this data which illustrates the global aviation footprint for 2004, and provides temporal and three-dimensional spatial distribution statistics of several emissions constituents.

  11. Verification of NOx emission inventories over North Korea.

    PubMed

    Kim, Na Kyung; Kim, Yong Pyo; Morino, Yu; Kurokawa, Jun-ichi; Ohara, Toshimasa

    2014-12-01

    In this study, the top-down NOx emissions estimated from satellite observations of NO2 vertical column densities over North Korea from 1996 to 2009 were analyzed. Also, a bottom-up NOx emission inventory from REAS 1.1 from 1980 to 2005 was analyzed with several statistics. REAS 1.1 was in good agreement with the top-down approach for both trend and amount. The characteristics of NOx emissions in North Korea were quite different from other developed countries including South Korea. In North Korea, emissions from industry sector was the highest followed by transportation sector in the 1980s. However, after 1990, the NOx emissions from other sector, mainly agriculture, became the 2nd highest. Also, no emission centers such as urban areas or industrial areas were distinctively observed. Finally, the monthly NOx emissions were high during the warm season.

  12. Inventory of U.S. 2012 dioxin emissions to atmosphere.

    PubMed

    Dwyer, Henri; Themelis, Nickolas J

    2015-12-01

    In 2006, the U.S. EPA published an inventory of dioxin emissions for the U.S. covering the period from 1987-2000. This paper is an updated inventory of all U.S. dioxin emissions to the atmosphere in the year 2012. The sources of emissions of polychlorinated dibenzodioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), collectively referred to in this paper as "dioxins", were separated into two classes: controlled industrial and open burning sources. Controlled source emissions decreased 95.5% from 14.0 kg TEQ in 1987 to 0.6 kg in 2012. Open burning source emissions increased from 2.3 kg TEQ in 1987 to 2.9 kg in 2012. The 2012 dioxin emissions from 53 U.S. waste-to-energy (WTE) power plants were compiled on the basis of detailed data obtained from the two major U.S. WTE companies, representing 84% of the total MSW combusted (27.4 million metric tons). The dioxin emissions of all U.S. WTE plants in 2012 were 3.4 g TEQ and represented 0.54% of the controlled industrial dioxin emissions, and 0.09% of all dioxin emissions from controlled and open burning sources.

  13. Estonian greenhouse gas emissions inventory report

    SciTech Connect

    Punning, J.M.; Ilomets, M.; Karindi, A.; Mandre, M.; Reisner, V.; Martins, A.; Pesur, A.; Roostalu, H.; Tullus, H.

    1996-07-01

    It is widely accepted that the increase of greenhouse gas concentrations in the atmosphere due to human activities would result in warming of the Earth`s surface. To examine this effect and better understand how the GHG increase in the atmosphere might change the climate in the future, how ecosystems and societies in different regions of the World should adapt to these changes, what must policymakers do for the mitigation of that effect, the worldwide project within the Framework Convention on Climate Change was generated by the initiative of United Nations. Estonia is one of more than 150 countries, which signed the Framework Convention on Climate Change at the United Nations Conference on Environment and Development held in Rio de Janeiro in June 1992. In 1994 a new project, Estonian Country Study was initiated within the US Country Studies Program. The project will help to compile the GHG inventory for Estonia, find contemporary trends to investigate the impact of climate change on the Estonian ecosystems and economy and to formulate national strategies for Estonia addressing to global climate change.

  14. POP emission inventories on different scales and their future trends

    NASA Astrophysics Data System (ADS)

    Theloke, Jochen; Breivik, Knut; Denier van der Gon, Hugo; Kugler, Ulrike; Li, Yi-Fan; Pacyna, Jozef; Panasiuk, Damian; Sundseth, Kyrre; Sweetman, Andy; Tao, Shu

    2010-05-01

    Persistent organic pollutants (POPs) are defined as organic substances that possess toxic characteristics; are persistent; bioaccumulate; are prone to long-range transboundary atmospheric transport and deposition; and are likely to cause significant adverse human health or environmental effects near to and distant from their sources. To reduce these adverse effects and for monitoring the effectiveness of existing international agreements, esp. UNECE-POP and UNEP protocols, concerning POPs the compilation of emission inventories is required. This presentation addresses emission inventories for POPs which are covered by existing protocols as well as candidate substances which are in focus for the revision of the international protocols. The following substances will be taken into account in this presentation: Dioxins and Furans (PCDD/F), PAHs, PCBs, Hexachlorbenzene (HCB), Pesticides (e.g. HCH, Dicofol and Endosulfan), Perfluoroctansulfonate (PFOS) and Polybrominated Diphenylethers (PBDEs), Hexachlorobutadiene (HCBD), Pentachlorobenzene (PeCB), Polychlorinated Naphthalenes (PCN), and Pentachlorophenols (PCPs). For all considered substances emission inventories exist with different qualities, from preliminary estimates to more complete inventories. These inventories are based on different methodologies (measurements, modelling, mass balance approaches, etc.), cover different regions (Europe, North America, Asia, China) and different spatial scales (regional, global) with different spatial resolutions. An overview will be given of the current state of the knowledge through a description of the main sources for the specific pollutants, the recent emission levels, a description of historical emission (incl. time series) and gridded data bases, if available. Furthermore, recommendations to improve POP emission inventories as well as major obstacles to achieve these improvements will be given. A further focus of this presentation will be an overview of future trends of

  15. Emission inventory estimation of an intercity bus terminal.

    PubMed

    Qiu, Zhaowen; Li, Xiaoxia; Hao, Yanzhao; Deng, Shunxi; Gao, H Oliver

    2016-06-01

    Intercity bus terminals are hotspots of air pollution due to concentrated activities of diesel buses. In order to evaluate the bus terminals' impact on air quality, it is necessary to estimate the associated mobile emission inventories. Since the vehicles' operating condition at the bus terminal varies significantly, conventional calculation of the emissions based on average emission factors suffers the loss of accuracy. In this study, we examined a typical intercity bus terminal-the Southern City Bus Station of Xi'an, China-using a multi-scale emission model-(US EPA's MOVES model)-to quantity the vehicle emission inventory. A representative operating cycle for buses within the station is constructed. The emission inventory was then estimated using detailed inputs including vehicle ages, operating speeds, operating schedules, and operating mode distribution, as well as meteorological data (temperature and humidity). Five functional areas (bus yard, platforms, disembarking area, bus travel routes within the station, and bus entrance/exit routes) at the terminal were identified, and the bus operation cycle was established using the micro-trip cycle construction method. Results of our case study showed that switching to compressed natural gas (CNG) from diesel fuel could reduce PM2.5 and CO emissions by 85.64 and 6.21 %, respectively, in the microenvironment of the bus terminal. When CNG is used, tail pipe exhaust PM2.5 emission is significantly reduced, even less than brake wear PM2.5. The estimated bus operating cycles can also offer researchers and policy makers important information for emission evaluation in the planning and design of any typical intercity bus terminals of a similar scale.

  16. Emission inventory estimation of an intercity bus terminal.

    PubMed

    Qiu, Zhaowen; Li, Xiaoxia; Hao, Yanzhao; Deng, Shunxi; Gao, H Oliver

    2016-06-01

    Intercity bus terminals are hotspots of air pollution due to concentrated activities of diesel buses. In order to evaluate the bus terminals' impact on air quality, it is necessary to estimate the associated mobile emission inventories. Since the vehicles' operating condition at the bus terminal varies significantly, conventional calculation of the emissions based on average emission factors suffers the loss of accuracy. In this study, we examined a typical intercity bus terminal-the Southern City Bus Station of Xi'an, China-using a multi-scale emission model-(US EPA's MOVES model)-to quantity the vehicle emission inventory. A representative operating cycle for buses within the station is constructed. The emission inventory was then estimated using detailed inputs including vehicle ages, operating speeds, operating schedules, and operating mode distribution, as well as meteorological data (temperature and humidity). Five functional areas (bus yard, platforms, disembarking area, bus travel routes within the station, and bus entrance/exit routes) at the terminal were identified, and the bus operation cycle was established using the micro-trip cycle construction method. Results of our case study showed that switching to compressed natural gas (CNG) from diesel fuel could reduce PM2.5 and CO emissions by 85.64 and 6.21 %, respectively, in the microenvironment of the bus terminal. When CNG is used, tail pipe exhaust PM2.5 emission is significantly reduced, even less than brake wear PM2.5. The estimated bus operating cycles can also offer researchers and policy makers important information for emission evaluation in the planning and design of any typical intercity bus terminals of a similar scale. PMID:27220506

  17. Comprehensive Black Carbon Emission Inventory of India: Uncertainty Analyses

    NASA Astrophysics Data System (ADS)

    Burkhart, J. F.; Paliwal, U.; Sharma, M.

    2015-12-01

    We present a new GIS based comprehensive high resolution grid wise emission inventory of Black carbon from India in the year 2011. The emissions have been determined at district level and were spatially distributed into grids at a resolution of 40x40 km2. The uncertainty in emissions has been estimated using Monte Carlo simulation by considering the variability in activity data and emission factors. Monthly variation of BC emissions has also been determined. The total BC annual emission for India in 2011 is determined to be 892.12 ± 151.53 Gg/yr. Domestic fuels contributed maximum (48%) followed by Industry (22%), Transport (17%), open burning (12%) and others (1%).

  18. IMPROVING EMISSION INVENTORIES FOR EFFECTIVE AIR-QUALITY MANAGEMENT ACROSS NORTH AMERICA - A NARSTO ASSESSMENT

    EPA Science Inventory

    The NARSTO Ozone and Particulate Matter Assessments emphasized that emission inventories are critical to the success of air quality management programs and that emissions inventories in Canada, Mexico, and the United States need improvement to meet expectations for quality, timel...

  19. IMPROVING EMISSION INVENTORIES FOR EFFECTIVE AIR-QUALITY MANAGMENT ACROSS NORTH AMERICA - A NARSTO ASSESSMENT

    EPA Science Inventory

    The NARSTO Ozone and Particulate Matter Assessments emphasized that emission inventories are critical to the success of air quality management programs and that emissions inventories in Canada, Mexico, and the United States need improvement to meet expectations for quality, timel...

  20. (AWMA) IMPROVING EMISSION INVENTORIES FOR EFFECTIVE AIR-QUALITY MANAGEMENT ACROSS NORTH AMERICA - A NARSTO ASSESSMENT

    EPA Science Inventory

    The NARSTO Ozone and Particulate Matter Assessments emphasized that emission inventories are critical to the success of air quality management programs and that emissions inventories in Canada, Mexico, and the United States need improvement to meet expectations for quality, timel...

  1. New national emission inventory for navigation in Denmark

    NASA Astrophysics Data System (ADS)

    Winther, Morten

    This article explains the new emission inventory for navigation in Denmark, covering national sea transport, fisheries and international sea transport. For national sea transport, the new Danish inventory distinguishes between regional ferries, local ferries and other national sea transport. Detailed traffic and technical data lie behind the fleet activity-based fuel consumption and emission calculations for regional ferries. For local ferries and other national sea transport, the new inventory is partly fleet activity based; fuel consumption estimates are calculated for single years, and full fuel consumption coverage is established in a time series by means of appropriate assumptions. For fisheries and international sea transport, the new inventory remains fuel based, using fuel sales data from the Danish Energy Authority (DEA). The new Danish inventory uses specific fuel consumption (sfc) and NO x emission factors as a function of engine type and production year. These factors, which are used directly for regional ferries and, for the remaining navigation categories, are derived by means of appropriate assumptions, serve as a major inventory improvement, necessary for making proper emission trend assessments. International sea transport is the most important fuel consumption and emission source for navigation, and the contributions are large even compared with the overall Danish totals. If the contributions from international sea transport were included in the Danish all-sector totals, the extra contributions in 2005 from fuel consumption (and CO 2), NO x and SO 2 would be 5%, 34% and 167%, respectively. The 1990-2005 changes in fuel consumption as well as NO x and SO 2 emissions for national sea transport (-45, -45, -81), fisheries (-18, 6, -18) and international sea transport (-14, 1, -14) reflect changes in fleet activity/fuel consumption and emission factors. The 2006-2020 emission forecasts demonstrate a need for stricter fuel quality and NO x emission

  2. Inventory of methane emissions from U.S. cattle

    NASA Astrophysics Data System (ADS)

    Westberg, H.; Lamb, B.; Johnson, K. A.; Huyler, M.

    2001-01-01

    Many countries, including the United States, are in the process of inventorying greenhouse gas emissions as a prerequisite for designing control strategies. We have developed a measurement-based inventory of methane emissions from cattle in the United States. Methane emission factors were established for the major livestock groups using an internal tracer method. The groups studied included cows, replacement heifers, slaughter cattle, calves, and bulls in the beef sector and cows plus replacement heifers in the dairy industry. Since methane emission is dependent on the quality and quantity of feed, diets were chosen that are representative of the feed regimes utilized by producers in the United States. Regional cattle populations, obtained from U.S. Department of Agriculture statistics, were combined with the methane emission factors to yield regional emission estimates. The methane totals from the five regions were then summed to give a U.S. inventory of cattle emissions for 1990, 1992, 1994, 1996, and 1998. Annual releases ranged from 6.50 Tg in 1990 to a high of 6.98 Tg in 1996. On a regional scale the North Central region of the United States had the largest methane emissions from livestock followed by the South Central and the West. The beef cow group released the most methane (˜2.5 Tg yr-1) followed by slaughter cattle (˜1.7 Tg yr-1) and dairy cows at about 1.5 Tg yr-1. Methane released by cattle in the United States contributes about 11% of the global cattle source.

  3. Update and improvement of the global krypton-85 emission inventory.

    PubMed

    Ahlswede, Jochen; Hebel, Simon; Ross, J Ole; Schoetter, Robert; Kalinowski, Martin B

    2013-01-01

    Krypton-85 is mainly produced in nuclear reactors by fission of uranium and plutonium and released during chopping and dissolution of spent fuel rods in nuclear reprocessing facilities. As noble gas it is suited as a passive tracer for evaluation of atmospheric transport models. Furthermore, research is ongoing to assess its quality as an indicator for clandestine reprocessing activities. This paper continues previous efforts to compile a comprehensive historic emission inventory for krypton-85. Reprocessing facilities are the by far largest emitters of krypton-85. Information on sources and calculations used to derive the annual krypton-85 emission is provided for all known reprocessing facilities in the world. In addition, the emission characteristics of two plants, Tokai (Japan) and La Hague (France), are analysed in detail using emission data with high temporal resolution. Other types of krypton-85 sources are power reactors, naval reactors and isotope production facilities. These sources contribute only little or negligible amounts of krypton-85 compared to the large reprocessing facilities. Taking the decay of krypton-85 into account, the global atmospheric inventory is estimated to about 5500 PBq at the end of 2009. The correctness if the inventory has been proven by meteorological simulations and its error is assumed to be in the range of a few percent. PMID:22858641

  4. Update and improvement of the global krypton-85 emission inventory.

    PubMed

    Ahlswede, Jochen; Hebel, Simon; Ross, J Ole; Schoetter, Robert; Kalinowski, Martin B

    2013-01-01

    Krypton-85 is mainly produced in nuclear reactors by fission of uranium and plutonium and released during chopping and dissolution of spent fuel rods in nuclear reprocessing facilities. As noble gas it is suited as a passive tracer for evaluation of atmospheric transport models. Furthermore, research is ongoing to assess its quality as an indicator for clandestine reprocessing activities. This paper continues previous efforts to compile a comprehensive historic emission inventory for krypton-85. Reprocessing facilities are the by far largest emitters of krypton-85. Information on sources and calculations used to derive the annual krypton-85 emission is provided for all known reprocessing facilities in the world. In addition, the emission characteristics of two plants, Tokai (Japan) and La Hague (France), are analysed in detail using emission data with high temporal resolution. Other types of krypton-85 sources are power reactors, naval reactors and isotope production facilities. These sources contribute only little or negligible amounts of krypton-85 compared to the large reprocessing facilities. Taking the decay of krypton-85 into account, the global atmospheric inventory is estimated to about 5500 PBq at the end of 2009. The correctness if the inventory has been proven by meteorological simulations and its error is assumed to be in the range of a few percent.

  5. 40 CFR 51.1008 - Emission inventory requirements for the PM2.5 NAAQS.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Provisions for Implementation of PM2.5 National Ambient Air Quality Standards § 51.1008 Emission inventory requirements for the PM2.5 NAAQS. (a) For purposes of meeting the emission inventory requirements of section... 40 Protection of Environment 2 2012-07-01 2012-07-01 false Emission inventory requirements for...

  6. 40 CFR 51.915 - What emissions inventory requirements apply under the 8-hour NAAQS?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... PLANS Provisions for Implementation of 8-hour Ozone National Ambient Air Quality Standard § 51.915 What... emissions inventory requirement in section 172(c)(3) of the Act shall apply, and an emission inventory SIP... emissions inventories for these areas, the ozone-relevant data element requirements under 40 CFR part...

  7. The sectoral trends of multigas emissions inventory of India

    NASA Astrophysics Data System (ADS)

    Garg, Amit; Shukla, P. R.; Kapshe, Manmohan

    This paper provides the trends of greenhouse gas (GHG) and local air pollutant emissions of India for 1985-2005. The GHGs covered are six Kyoto gases, namely carbon dioxide (CO 2), methane (CH 4), nitrous oxide (N 2O), perfluorocarbons (PFCs), hydrofluorocarbons (HFCs) and sulfur hexafluoride (SF 6). The local air pollutants are sulfur dioxide (SO 2), nitrogen oxides (NO X), carbon monoxide (CO) and total suspended particulates (TSP). These estimates incorporate some of the most recent scientific assessments for India. The multigas emissions have varied sectoral and fuel-based dominance, as well as regional distribution patterns. Coal consumption in power sector dominates CO 2 and SO 2 emissions, while power and road transport equally contribute to NO X emissions. Rice cultivation and livestock-related emissions from the agriculture sector dominate CH 4 emissions, while synthetic fertilizer use in the same sector is the major source of N 2O emissions. PFC emissions are dominated by C 2F 6 and CF 4 emissions from aluminum production. The majority of HFC emissions are contributed by HFC-23, a by-product during the production of HCFC-22 that is widely used in refrigeration industry. CO emissions have dominance from biomass burning. Particulate emissions are dominated by biomass burning (residential sector), road transport and coal combustion in large plants. These varied emission patterns provide interesting policy links and disjoints, such as—which and where mitigation flexibility for the Kyoto gases, exploring co-benefits of CO 2 and SO 2 mitigation, and technology and development pathway dependence of emissions. The present inventory assessment is a pointer to the future emission pathways for India wherein local air pollutant and GHG emissions, although connected, may not move in synchronization and therefore would require alignment through well crafted development and environment strategies.

  8. NWCF Evaporator Tank System 2001 Offgas Emissions Inventory

    SciTech Connect

    Boardman, Richard Doin; Lamb, Kenneth Mitchel; Matejka, Leon Anthony; Nenni, Joseph A

    2002-02-01

    An offgas emissions inventory and liquid stream characterization of the Idaho New Waste Calcining Facility (NWCF) Evaporator Tank System (ETS), formerly known as the High Level Liquid Waste Evaporator (HLLWE), has been completed. The emissions rates of volatile and semi-volatile organic compounds, multiple metals, particulate, and hydrochloric acid were measured in accordance with an approved Quality Assurance Project Plan (QAPjP) and Test Plan that invoked U.S. Environmental Protection Agency (EPA) standard sample collection and analysis procedures. Offgas samples were collected during the start up and at the end of evaporator batches when it was hypothesized the emissions would be at peak rates. Corresponding collection of samples from the evaporator feed overhead condensate, and bottoms was made at approximately the same time as the emissions inventory to support material balance determinations for the evaporator process. The data indicate that organic compound emissions are slightly higher at the beginning of the batch while metals emissions, including mercury, are slightly higher at the end of the evaporator batch. The maximum emissions concentrations are low for all constituents of primary concern. Mercury emissions were less than 5 ppbv, while the sum of HCl and Cl2 emissions was less than 1 ppmv. The sum of all organic emissions also was less than 1 ppmv. The estimated hazardous quotient (HQ) for the evaporator was 6.2e-6 as compared to 0.25 for the EPA target criteria. The cancer risk was 1.3e-10 compared to an EPA target of le-5.

  9. Developing Shipping Emissions Assessments, Inventories and Scenarios (Invited)

    NASA Astrophysics Data System (ADS)

    Corbett, J. J.

    2010-12-01

    Inventories of shipping have been important contributions to scientific understanding of regional pollution and transboundary transport. These inventories have also been used to evaluate global scale environmental and climate effects and trends. However, these inventories also inform policy making decisions and this role is increasingly occurring within the timescale of scientific assessment. Shipping exhibits a growth trend for uncontrolled pollutants that is highly coupled to economic activity, and historically increasing faster than many other anthropogenic sources on a global and regional scale. Shipping emissions are being regulated asymmetrically in various dimensions. Some pollutants are being controlled more than others, some regions are subject to stricter controls, and correlated changes in operations are affecting unregulated pollutant emissions. Shipping inventories require more than current assessments, including historic and future scenarios. Generally conceived as sets of business-as-usual (BAU) and high-growth scenarios, ship inventories now also need regulatory control pathways and maximum feasible reduction (MFR) scenarios. In this context, shipping inventories also present other challenges to both scientists and policymakers. Systemic bias can occur in non-shipping assessments when emissions along well-traveled shipping lanes are ignored by far offshore scientific studies, even some campaigns that control very carefully the potential influence of the shipping platforms for their measurements. Examples where shipping may contribute understood and potential biases include: a. Health impacts from transboundary pollution b. Ozone trends over the Pacific c. Sulfur emissions from biogenic sources in Northern hemisphere d. Acidification of coastal waters (potential) e. Arctic impacts on snow and ice Other challenges exist. The fuels and technology used by ships are unique from other transportation, from other stationary sources - and these are changing

  10. A high-resolution ammonia emission inventory in China

    NASA Astrophysics Data System (ADS)

    Huang, Xin; Song, Yu; Li, Mengmeng; Li, Jianfeng; Huo, Qing; Cai, Xuhui; Zhu, Tong; Hu, Min; Zhang, Hongsheng

    2012-03-01

    The existence of gas-phase ammonia (NH3) in the atmosphere and its interaction with other trace chemical species could have a substantial impact on tropospheric chemistry and global climate change. China is a large agricultural country with an enormous animal population, tremendous nitrogen fertilizer consumption and, consequently, a large emission of NH3. Despite the importance of NH3 in the global nitrogen (N) cycle, considerable inaccuracies and uncertainty exist regarding its emission in China. In this study, a comprehensive NH3 emission inventory was compiled for China on a 1 km × 1 km grid, which is suitable for input to atmospheric models. We attempted to estimate NH3 emissions accurately by taking into consideration as many native experiment results as possible and parameterizing the emission factors (EFs) by the ambient temperature, soil acidity and other factors. The total NH3emission in China was approximately 9.8 Tg in 2006. The emission sources considered included livestock excreta (5.3 Tg), fertilizer application (3.2 Tg), agricultural soil (0.2 Tg), nitrogen-fixing plants (0.05 Tg), crop residue compost (0.3 Tg), biomass burning (0.1 Tg), urine from rural populations (0.2 Tg), chemical industry (0.2 Tg), waste disposal (0.1 Tg) and traffic (0.1 Tg). The regions with the highest emission rates are located in Central and Southwest China. Seasonally, the peak ammonia emissions occur in spring and summer.

  11. Teaching migration routes to canada geese and trumpeter swans using ultralight aircraft, 1990-2001

    USGS Publications Warehouse

    Sladen, William J. L.; Lishman, W.A.; Ellis, D.H.; Shire, G.G.; Rininger, D.L.; Rees, Eileen C.; Earnst, Susan L.; Coulson, John C.

    2002-01-01

    This paper summarizes eleven years (1990-2001) of experiments to teach Canada Geese (Branta canadensis) and Trumpeter Swans (Cygnus buccinator) pre-selected migration routes using ultralight aircraft. When Canada Geese were trained to follow an ultralight aircraft for southward autumn migrations of 680 or 1,320 km, 81% (83/103) returned on their own in the next spring to near their place of training. In contrast, none returned of 21 similarly raised geese that were transported south in a closed truck over a route of 680 km. Trumpeter Swans have proven more difficult to train. However, in two experiments in which Trumpeter Swans followed an ultralight for the entire pre-selected route, one of three and two of four returned close to their training area. A stage-by-stage method, in which swans were transported in trucks between stops, flown in the vicinity and penned with a view of the night sky, has shown some promise. So far an established migration route (north and south twice) has been confirmed in only two geese

  12. The Wildland Fire Emission Inventory: emission estimates and an evaluation of uncertainty

    NASA Astrophysics Data System (ADS)

    Urbanski, S. P.; Hao, W. M.; Nordgren, B.

    2011-08-01

    We present the Wildland Fire Emission Inventory (WFEI), a high resolution model for non-agricultural open biomass burning (hereafter referred to as wildland fires) in the contiguous United States (CONUS). WFEI was used to estimate emissions of CO and PM2.5 for the western United States from 2003-2008. The estimated annual CO emitted ranged from 436 Gg yr-1 in 2004 to 3107 Gg yr-1 in 2007. The extremes in estimated annual PM2.5 emitted were 65 Gg yr-1 in 2004 and 454 Gg yr-1 in 2007. Annual wildland fire emissions were significant compared to other emission sources in the western United States as estimated in a national emission inventory. In the peak fire year of 2007, fire emissions were ~20 % of total CO emissions and ~39 % of total PM2.5 emissions. During the months with the greatest fire activity, wildland fires accounted for the majority of CO and PM2.5 emitted across the study region. The uncertainty in the inventory estimates of CO and PM2.5 emissions (ECO and EPM2.5, respectively) have been quantified across spatial and temporal scales relevant to regional and global modeling applications. The uncertainty in annual, domain wide emissions was 28 % to 51 % for CO and 40 % to 65 % for PM2.5. Sensitivity of the uncertainty in ECO and EPM2.5 to the emission model components depended on scale. At scales relevant to regional modeling applications (Δx = 10 km, Δt = 1 day) WFEI estimates 50 % of total ECO with an uncertainty <133 % and half of total EPM2.5 with an uncertainty <146 %. The uncertainty in ECO and EPM2.5 is significantly reduced at the scale of global modeling applications (Δx = 100 km, Δt = 30 day). Fifty percent of total emissions are estimated with an uncertainty <50 % for CO and <64 % for PM2.5. Uncertainty in the burned area drives the emission uncertainties at regional scales. At global scales the uncertainty in ECO is most sensitive to uncertainties in the fuel load consumed while the uncertainty in the emission factor for PM2.5 drives the

  13. The incorporation of the US national emission inventory into version 2 of the Hemispheric Transport of air Pollutants inventory

    EPA Science Inventory

    EPA's 2008 national emission inventory has been incorporated into version 2 of the Hemispheric Transport of Air Pollutants Inventory. This work involves the creation of a detailed mapping of EPA Source Classification Codes (SCC) to the International Nomenclature for Reporting Sy...

  14. U.S. broiler housing ammonia emissions inventory

    NASA Astrophysics Data System (ADS)

    Gates, R. S.; Casey, K. D.; Wheeler, E. F.; Xin, H.; Pescatore, A. J.

    Using recently published baseline ammonia emissions data for U.S. broiler chicken housing, we present a method of estimating their contribution to an annual ammonia budget that is different from that used by USEPA. Emission rate increases in a linear relationship with flock age from near zero at the start of the flock to a maximum at the end of the flock, 28-65 days later. Market weight of chickens raised for meat varies from "broilers" weighing about 2 kg to "roasters" weighing about 3 kg. Multiple flocks of birds are grown in a single house annually, with variable downtime to prepare the house between flocks. The method takes into account weight and number of chickens marketed. Uncertainty in baseline emissions estimates is used so that inventory estimates are provided with error estimates. The method also incorporates the condition of litter that birds are raised upon and the varying market weight of birds grown. Using 2003 USDA data on broiler production numbers, broiler housing is estimated to contribute 8.8-11.7 kT ammonia for new and built-up litter, respectively, in Kentucky and 240-324 kT ammonia for new and built-up litter, respectively, nationally. Results suggest that a 10% uncertainty in annual emission rate is expected for the market weight categories of broilers, heavy broilers, and roasters. A 27-47% reduction in annual housing emission rate is predicted if new rather than built-up litter were used for every flock. The estimating method can be adapted to other meat bird building emissions and future ammonia emission strategies, with suitable insertion of an age-dependent emission factor or slope into a predictive model equation. The method can be readily applied and is an alternative to that used by USEPA.

  15. Isoprene emission inventory for the BOREAS southern study area.

    PubMed

    Westberg, Hal; Lamb, Brian; Kempf, Kelly; Allwine, Gene

    2000-06-01

    An isoprene emission inventory for a section of boreal forest in central Saskatchewan was developed based on measured emission rates from the two dominant isoprene-emitting species, black spruce (Picea mariana (Mill.) BSP) and aspen (Populus tremuloides Michx.). The micrometeorological gradient technique was used to determine isoprene emission factors for establishing the inventory. Isoprene fluxes were measured during each of the three BOREAS intensive field campaigns (IFCs) during the 1994 growing season. Measured isoprene fluxes varied from 0.04 to 3.3 mg C m(-2) h(-1) over the black spruce canopy, and from 0.05 to 7.3 mg C m(-2) h(-1) above the aspen forest. Midsummer standard isoprene emission fluxes were 1.2 mg C m(-2) h(-1) and 2.3 mg C m(-2) h(-1) (at 20 degrees C and photosynthetically active radiation (PAR) of 1000 &mgr;mol m(-2) s(-1)) for black spruce and aspen, respectively. With light and temperature differences accounted for, there was an apparent seasonal effect on emissions with the highest rates in the summer months. The total amount of isoprene emitted from this section of the boreal forest was estimated to be 8.6 Gg C year(-1), which is about 1% of the net ecosystem carbon exchange for the study area. Aspen was the largest contributor, accounting for approximately 70% of the total. Branch enclosure and relaxed eddy accumulation measurements made at the black spruce site were used to define the uncertainty associated with flux measurements. Emission rates obtained by the gradient, enclosure and relaxed eddy accumulation methods showed good agreement when normalized to standard light and temperature conditions. The coefficient of variance between the three techniques was 12% for summer (IFC-2) measurements. The sensitivity of the annual isoprene emission total to the assignment of mean irradiance and temperature was also examined. If the hourly mean temperatures were increased by 1 degrees C throughout the growing season, annual carbon loss due to

  16. Towards a comprehensive greenhouse gas emissions inventory for biosolids.

    PubMed

    Alvarez-Gaitan, J P; Short, Michael D; Lundie, Sven; Stuetz, Richard

    2016-06-01

    Effective handling and treatment of the solids fraction from advanced wastewater treatment operations carries a substantial burden for water utilities relative to the total economic and environmental impacts from modern day wastewater treatment. While good process-level data for a range of wastewater treatment operations are becoming more readily available, there remains a dearth of high quality operational data for solids line processes in particular. This study seeks to address this data gap by presenting a suite of high quality, process-level life cycle inventory data covering a range of solids line wastewater treatment processes, extending from primary treatment through to biosolids reuse in agriculture. Within the study, the impacts of secondary treatment technology and key parameters such as sludge retention time, activated sludge age and primary-to-waste activated sludge ratio (PS:WAS) on the life cycle inventory data of solids processing trains for five model wastewater treatment plant configurations are presented. BioWin(®) models are calibrated with real operational plant data and estimated electricity consumption values were reconciled against overall plant energy consumption. The concept of "representative crop" is also introduced in order to reduce the uncertainty associated with nitrous oxide emissions and soil carbon sequestration offsets under biosolids land application scenarios. Results indicate that both the treatment plant biogas electricity offset and the soil carbon sequestration offset from land-applied biosolids, represent the main greenhouse gas mitigation opportunities. In contrast, fertiliser offsets are of relatively minor importance in terms of the overall life cycle emissions impacts. Results also show that fugitive methane emissions at the plant, as well as nitrous oxide emissions both at the plant and following agricultural application of biosolids, are significant contributors to the overall greenhouse gas balance and combined are

  17. Towards a comprehensive greenhouse gas emissions inventory for biosolids.

    PubMed

    Alvarez-Gaitan, J P; Short, Michael D; Lundie, Sven; Stuetz, Richard

    2016-06-01

    Effective handling and treatment of the solids fraction from advanced wastewater treatment operations carries a substantial burden for water utilities relative to the total economic and environmental impacts from modern day wastewater treatment. While good process-level data for a range of wastewater treatment operations are becoming more readily available, there remains a dearth of high quality operational data for solids line processes in particular. This study seeks to address this data gap by presenting a suite of high quality, process-level life cycle inventory data covering a range of solids line wastewater treatment processes, extending from primary treatment through to biosolids reuse in agriculture. Within the study, the impacts of secondary treatment technology and key parameters such as sludge retention time, activated sludge age and primary-to-waste activated sludge ratio (PS:WAS) on the life cycle inventory data of solids processing trains for five model wastewater treatment plant configurations are presented. BioWin(®) models are calibrated with real operational plant data and estimated electricity consumption values were reconciled against overall plant energy consumption. The concept of "representative crop" is also introduced in order to reduce the uncertainty associated with nitrous oxide emissions and soil carbon sequestration offsets under biosolids land application scenarios. Results indicate that both the treatment plant biogas electricity offset and the soil carbon sequestration offset from land-applied biosolids, represent the main greenhouse gas mitigation opportunities. In contrast, fertiliser offsets are of relatively minor importance in terms of the overall life cycle emissions impacts. Results also show that fugitive methane emissions at the plant, as well as nitrous oxide emissions both at the plant and following agricultural application of biosolids, are significant contributors to the overall greenhouse gas balance and combined are

  18. DEVELOPMENT OF SEASONAL AND ANNUAL BIOGENIC EMISSIONS INVENTORIES FOR THE U.S. AND CANADA

    EPA Science Inventory

    The report describes the development of a biogenic emissions inventory for the U.S. and Canada, to assess the role of biogenic emissions in ozone formation. Emission inventories were developed at hourly and grid (1/4 x 116 degree) level from input data at the same scales. Emissio...

  19. Emission inventory of evaporative emissions of VOCs in four metro cities in India.

    PubMed

    Srivastava, Anjali; née Som Majumdar, Dipanjali

    2010-01-01

    High concentrations of volatile organic compounds (VOCs) in ambient air of urban areas stress the need for the control of VOC emissions due to the toxic and carcinogenic nature of many VOCs commonly encountered in urban air. Emission inventories are an essential tool in the management of local air quality, which provide a listing of sources of air pollutant emissions within a specific area over a specified period of time. This study intended to provide a level IV emission inventory as par the United States Environmental Protection Agency (USEPA) definition for evaporative VOC emissions in the metro cities of India namely Delhi, Mumbai, Chennai, and Kolkata. The vehicular evaporative emissions are found to be the largest contributor to the total evaporative emissions of hydrocarbons followed by evaporative losses related to petrol loading and unloading activities. Besides vehicle-related activities, other major sources contributing to evaporative emissions of hydrocarbons are surface coating, dry cleaning, graphical art applications, printing (newspaper and computer), and the use of consumer products. Various specific preventive measures are also recommended for reducing the emissions. PMID:19093218

  20. "The Incorporation of National Emission Inventories into Version 2 of the Hemispheric Transport of Air Pollutants Inventory"

    EPA Science Inventory

    EPA’s National Emission Inventory has been incorporated into the Emission Database for Global Atmospheric Research-Hemispheric Transport of Air Pollutants (EDGAR-HTAP) version 2. This work involves the creation of a detailed mapping of EPA Source Classification Codes (SCC) to the...

  1. Comparing Emission Inventories and Model-Ready Emission Datasets between Europe and North America for the AQMEII Project

    EPA Science Inventory

    This paper highlights the similarities and differences in how emission inventories and datasets were developed and processed across North America and Europe for the Air Quality Model Evaluation International Initiative (AQMEII) project and then characterizes the emissions for the...

  2. Building the Fire Energetics and Emissions Research (FEER) Smoke Emissions Inventory Version 1.0

    NASA Technical Reports Server (NTRS)

    Ellison, Luke; Ichoku, Charles; Zhang, Feng; Wang, Jun

    2014-01-01

    The Fire Energetics and Emissions Research (FEER) group's new coefficient of emission global gridded product at 1x1 resolution that directly relates fire readiative energy (FRE) to smoke aerosol release, FEERv1.0 Ce, made its public debut in August 2013. Since then, steps have been taken to generate corresponding maps and totals of total particulate matter (PM) emissions using different sources of FRE, and subsequently to simulate the resulting PM(sub 2.5) in the WRF-Chem 3.5 model using emission rates from FEERv1.0 as well as other standard biomass burning emission inventories. An flowchart of the FEER algorithm to calculate Ce is outlined here along with a display of the resulting emissions of total PM globally and also regionally. The modeling results from the WRF-Chem3.5 simulations are also shown.

  3. Emission inventory management system for the pulp and paper industry in the State of Louisiana

    SciTech Connect

    Tyndall, C.

    1996-12-31

    The Clean Air Act Amendments of 1990 (CAAA) have caused the pulp and paper industry to be confronted with environmental regulations which require an intense expansion of emission inventories. Under Title III of the CAAA, the recently promulgated Cluster Rule has compelled pulp and paper mills to prepare a thorough emission inventory of hazardous air pollutants. Title V of the CAAA requires major source facilities to prepare and submit an operating permit application. The operating permit application must include a complete emission inventory of regulated pollutants. In addition to these regulatory requirements at the federal level, the pulp and paper industry in the state of Louisiana is subject to two annual emission inventory reporting requirements by state regulations. Subsequently, a database management system was designed to consolidate these various emission inventories. This paper examines the need for collecting and managing emission data in the pulp and paper industry and the how the database management system serves to fulfill this need.

  4. Compilation and analyses of emissions inventories for the NOAA atmospheric chemistry project. Progress report, August 1997

    SciTech Connect

    Benkovitz, C.M.

    1997-09-01

    Global inventories of anthropogenic emissions of oxides of nitrogen for circa 1985 and 1990 and non-methane volatile organic compounds (NMVOCs) for circa 1990 have been compiled by this project. Work on the inventories has been carried out under the umbrella of the Global Emissions Inventory Activity of the International Global Atmospheric Chemistry program. Global emissions of NOx for 1985 are estimated to be 21 Tg N/yr, with approximately 84% originating in the Northern Hemisphere. The global emissions for 1990 are 31 Tg N/yr for NOx and 173 Gg NMVOC/yr. Ongoing research activities for this project continue to address emissions of both NOx and NMVOCs. Future tasks include: evaluation of more detailed regional emissions estimates and update of the default 1990 inventories with the appropriate estimates; derivation of quantitative uncertainty estimates for the emission values; and development of emissions estimates for 1995.

  5. THE CLIMATE-AIR QUALITY SCALE CONTINUUM AND THE GLOBAL EMISSION INVENTORY ACTIVITY

    EPA Science Inventory

    The Global Emissions Inventory Activity (GEIA), a core program activity of the International Global Atmospheric Chemistry (IGAC) Project of the International Geosphere-Biosphere Program, develops data and other related information on key chemical emissions to the atmosphere and...

  6. INNOVATIVE METHODS FOR EMISSION-INVENTORY DEVELOPMENT AND EVALUATION: WORKSHOP SUMMARY

    EPA Science Inventory

    Emission inventories are an essential tool for evaluating, managing, and regulating air pollution. Refinements and innovations in instruments that measure air pollutants, models that calculate emissions as well as techniques for data management and uncertainty assessment are nee...

  7. Black and organic carbon emission inventories: review and application to California.

    PubMed

    Chow, Judith C; Watson, John G; Lowenthal, Douglas H; Chen, Lung-Wen Antony; Motallebi, Nehzat

    2010-04-01

    Particulate black or elemental carbon (EC) (black carbon [BC]) and organic carbon (OC) affect climate, visibility, and human health. Several "top-down" and "bottom-up" global emission inventories for these components have compiled country-wide emission factors, source profiles, and activity levels that do not necessarily reflect local conditions. Recent estimates of global BC and OC emissions range from 8 to 24 and 33 to 62 Tg (1012 g) per year, respectively. U.S. BC emissions account for 5.6% of the global total emissions. Uncertainties in global BC emission estimates are a factor of 2 or more. The U.S. National Emissions Inventory is well documented, but its major source categories are not easily related to EC- and OC-emitting source subcategories. California's bottom-up emission inventory is easily accessible at many levels of detail and provides an example of how sources can be regrouped for speciated emission rates. PM2.5 (particulate matter with aerodynamic diameters < 2.5 microm) emissions from these categories are associated with EC and OC source profiles to generate California's speciated emissions. A BC inventory for California of 38,731 t/yr was comparable to the 33,281 t/yr estimated from a bottom-up global BC inventory. However, further examination showed substantial differences among subcategories, with the global inventory BC from fossil fuel combustion at two-thirds that from the California inventory and the remainder attributed to biomass burning. Major discrepancies were found for directly emitted OC, with the global inventory estimating more than twice that of the California inventory. Most of the discrepancy was due to differences in open biomass burning (wildfires and agricultural waste) for which carbon emissions are highly variable. BC and OC emissions are sensitive to the availability and variability of existing source profiles, and profiles more specific to fuels and operating conditions are needed to increase emission accuracy. PMID

  8. The wildland fire emission inventory: western United States emission estimates and an evaluation of uncertainty

    NASA Astrophysics Data System (ADS)

    Urbanski, S. P.; Hao, W. M.; Nordgren, B.

    2011-12-01

    Biomass burning emission inventories serve as critical input for atmospheric chemical transport models that are used to understand the role of biomass fires in the chemical composition of the atmosphere, air quality, and the climate system. Significant progress has been achieved in the development of regional and global biomass burning emission inventories over the past decade using satellite remote sensing technology for fire detection and burned area mapping. However, agreement among biomass burning emission inventories is frequently poor. Furthermore, the uncertainties of the emission estimates are typically not well characterized, particularly at the spatio-temporal scales pertinent to regional air quality modeling. We present the Wildland Fire Emission Inventory (WFEI), a high resolution model for non-agricultural open biomass burning (hereafter referred to as wildland fires, WF) in the contiguous United States (CONUS). The model combines observations from the MODerate Resolution Imaging Spectroradiometer (MODIS) sensors on the Terra and Aqua satellites, meteorological analyses, fuel loading maps, an emission factor database, and fuel condition and fuel consumption models to estimate emissions from WF. WFEI was used to estimate emissions of CO (ECO) and PM2.5 (EPM2.5) for the western United States from 2003-2008. The uncertainties in the inventory estimates of ECO and EPM2.5 (uECO and uEPM2.5, respectively) have been explored across spatial and temporal scales relevant to regional and global modeling applications. In order to evaluate the uncertainty in our emission estimates across multiple scales we used a figure of merit, the half mass uncertainty, ũEX (where X = CO or PM2.5), defined such that for a given aggregation level 50% of total emissions occurred from elements with uEX ũEX. The sensitivity of the WFEI estimates of ECO and EPM2.5 to uncertainties in mapped fuel loading, fuel consumption, burned area and emission factors have also been examined

  9. Development of a Biomass Burning Emissions Inventory by Combining Satellite and Ground-based Information

    EPA Science Inventory

    A 2005 biomass burning (wildfire, prescribed, and agricultural) emission inventory has been developed for the contiguous United States using a newly developed simplified method of combining information from multiple sources for use in the US EPA’s national Emission Inventory (NEI...

  10. The IGAC activity for the development of global emissions inventories: Description and initial results. Revision

    SciTech Connect

    Benkovitz, C.M.; Graedel, T.E.

    1992-02-01

    Modeling assessments of the atmospheric chemistry, air quality and climatic conditions of the past, present and future require as input inventories of emissions of the appropriate chemical species constructed on appropriate spatial and temporal scales. The task of the Global Emissions Inventories Activity (GEIA) of the International Global Atmospheric Chemistry Project (IGAC) is the production of global inventories suitable for a range of research applications. Current GEIA programs are generally based on addressing emissions by species; these include CO{sub 2}, NH{sub 3}/N{sub 2}O, SO{sub 2}/NO{sub x}, CFC, volatile organic compounds and radioisotopes. In addition a separate program to inventory emissions from biomass burning is also being structured, plus an additional program to address data management issues for all the developing inventories. Program priorities are based on current knowledge and tasks needed to produce the desired inventories. This paper will discuss the different types of global inventories to be developed by the GEIA programs, their key characteristics, and areas to be addressed in the compilation of such inventories. Results of the first GEIA task, a survey of existing inventories and auxiliary data, will be presented. The survey included status assessments for the available inventory information for nineteen different atmospheric species or groups of species on global and regional scales and over time. Of this entire body of information, the only inventory regarded as satisfactory was that for the global emissions of CFCs. An implication of the results of these assessments is that properly gridded emissions inventories are badly needed to support atmospheric modeling calculations on a variety of spatial and temporal scales. Initial studies in the development of global inventories of sulfur dioxide, currently the most advanced GEIA program, will be presented and discussed.

  11. The IGAC activity for the development of global emissions inventories: Description and initial results

    SciTech Connect

    Benkovitz, C.M. ); Graedel, T.E. )

    1992-02-01

    Modeling assessments of the atmospheric chemistry, air quality and climatic conditions of the past, present and future require as input inventories of emissions of the appropriate chemical species constructed on appropriate spatial and temporal scales. The task of the Global Emissions Inventories Activity (GEIA) of the International Global Atmospheric Chemistry Project (IGAC) is the production of global inventories suitable for a range of research applications. Current GEIA programs are generally based on addressing emissions by species; these include CO{sub 2}, NH{sub 3}/N{sub 2}O, SO{sub 2}/NO{sub x}, CFC, volatile organic compounds and radioisotopes. In addition a separate program to inventory emissions from biomass burning is also being structured, plus an additional program to address data management issues for all the developing inventories. Program priorities are based on current knowledge and tasks needed to produce the desired inventories. This paper will discuss the different types of global inventories to be developed by the GEIA programs, their key characteristics, and areas to be addressed in the compilation of such inventories. Results of the first GEIA task, a survey of existing inventories and auxiliary data, will be presented. The survey included status assessments for the available inventory information for nineteen different atmospheric species or groups of species on global and regional scales and over time. Of this entire body of information, the only inventory regarded as satisfactory was that for the global emissions of CFCs. An implication of the results of these assessments is that properly gridded emissions inventories are badly needed to support atmospheric modeling calculations on a variety of spatial and temporal scales. Initial studies in the development of global inventories of sulfur dioxide, currently the most advanced GEIA program, will be presented and discussed.

  12. The 1977 emissions inventory for southeastern Virginia. [environment model of air quality based on exhaust emission from urban areas

    NASA Technical Reports Server (NTRS)

    Brewer, D. A.; Remsberg, E. E.; Woodbury, G. E.; Quinn, L. C.

    1979-01-01

    Regional tropospheric air pollution modeling and data compilation to simulate the time variation of species concentrations in and around an urban area is discussed. The methods used to compile an emissions inventory are outlined. Emissions factors for vehicular travel in the urban area are presented along with an analysis of the emission gases. Emission sources other than vehicular including industrial wastes, residential solid waste disposal, aircraft emissions, and emissions from the railroads are investigated.

  13. ( RTP, NC ) IMPROVING EMISSION INVENTORIES FOR EFFECTIVE AIR-QUALITY MANAGEMENT ACROSS NORTH AMERICA - A NARSTO ASSESSMENT

    EPA Science Inventory

    The NARSTO Ozone and Particulate Matter Assessments emphasized that emission inventories are critical to the success of air quality management programs and that emissions inventories in Canada, Mexico, and the United States need improvement to meet expectations for quality, timel...

  14. (NEW YORK) IMPROVING EMISSION INVENTORIES FOR EFFECTIVE AIR-QUALITY MANAGEMENT ACROSS NORTH AMERICA - A NARSTO ASSESSMENT

    EPA Science Inventory

    The NARSTO Ozone and Particulate Matter Assessments emphasized that emission inventories are critical to the success of air quality management programs and that emissions inventories in Canada, Mexico, and the United States need improvement to meet expectations for quality, timel...

  15. Improving the City-scale Emission Inventory of Anthropogenic Air Pollutants: A Case Study of Nanjing

    NASA Astrophysics Data System (ADS)

    Qiu, L.; Zhao, Y.; Xu, R.; Xie, F.; Wang, H.; Qin, H.; Wu, X.; Zhang, J.

    2014-12-01

    To evaluate the improvement of city-scale emission inventory, a high-resolution emission inventory of air pollutants for Nanjing is first developed combining detailed source information, and then justified through quantitative analysis with observations. The best available domestic emission factors and unit-/facility-based activity level data were compiled based on a thorough field survey on major emission sources. Totally 1089 individual emission sources were identified as point sources and all the emission-related parameters including burner type, combustion technology, fuel quality, and removal efficiency of pollution control devices, are carefully investigated and analyzed. Some new data such as detailed information of city fueling-gas stations, construction sites, monthly activity level, data from continuous emission monitoring systems and traffic flow information were combined to improve spatiotemporal distribution of this inventory. For SO2, NOX and CO, good spatial correlations were found between ground observation (9 state controlling air sampling sites in Nanjing) and city-scale emission inventory (R2=0.34, 0.38 and 0.74, respectively). For TSP, PM10 and PM2.5, however, poorer correlation was found due to relatively weaker accuracy in emission estimation and spatial distribution of road dust. The mixing ratios between specific pollutants including OC/EC, BC/CO and CO2/CO, are well correlated between those from ground observation and emission. Compared to MEIC (Multi-resolution Emission Inventory for China), there is a better spatial consistence between this city-scale emission inventory and NO2 measured by OMI (Ozone Monitoring Instrument). In particular, the city-scale emission inventory still correlated well with satellite observations (R2=0.28) while the regional emission inventory showed little correlation with satellite observations (R2=0.09) when grids containing power plants are excluded. It thus confirms the improvement of city-scale emission

  16. COMPILATION AND ANALYSES OF EMISSIONS INVENTORIES FOR THE NOAA ATMOSPHERIC CHEMISTRY PROJECT. PROGRESS REPORT, AUGUST 1997.

    SciTech Connect

    BENKOVITZ,C.M.

    1997-09-01

    Global inventories of anthropogenic emissions of oxides of nitrogen (NO{sub x}) for circa 1985 and 1990 and Non-Methane Volatile Organic Compounds (NMVOCs) for circa 1990 have been compiled by this project. Work on the inventories has been carried out under the umbrella of the Global Emissions Inventory Activity (GEIA) of the International Global Atmospheric Chemistry (IGAC) Program. The 1985 NO{sub x} inventory was compiled using default data sets of global emissions that were refined via the use of more detailed regional data sets; this inventory is being distributed to the scientific community at large as the GEIA Version 1A inventory. Global emissions of NO{sub x} for 1985 are estimated to be 21 Tg N y{sup -1}, with approximately 84% originating in the Northern Hemisphere. The 1990 inventories of NO{sub x} and NMVOCs were compiled using unified methodologies and data sets in collaboration with the Netherlands National Institute of Public Health and Environmental Protection (Rijksinstituut Voor Volksgezondheid en Milieuhygiene, RIVM) and the Division of Technology for Society of the Netherlands Organization for Applied Scientific Research, (IMW-TNO); these emissions will be used as the default estimates to be updated with more accurate regional data. The NMVOC inventory was gridded and speciated into 23 chemical categories. The resulting global emissions for 1990 are 31 Tg N yr{sup -1} for NO{sub x} and 173 Gg NMVOC yr{sup -1}. Emissions of NO{sub x} are highest in the populated and industrialized areas of eastern North America and across Europe, and in biomass burning areas of South America, Africa, and Asia. Emissions of NMVOCs are highest in biomass burning areas of South America, Africa, and Asia. The 1990 NO{sub x} emissions were gridded to 1{sup o} resolution using surrogate data, and were given seasonal, two-vertical-level resolution and speciated into NO and NO{sub 2} based on proportions derived from the 1985 GEIA Version 1B inventory. Global NMVOC

  17. Changing speed-VMT distributions: the effects on emissions inventories and conformity.

    PubMed

    Nanzetta, K; Niemeier, D; Utts, J M

    2000-03-01

    The emissions factor modeling component of the motor vehicle emissions inventory (MVEI) modeling suite is currently being revised by the California Air Resources Board (CARB). One of the proposed changes in modeling philosophy is a shift from using link-based travel activity data to trip-based travel data for preparing mobile emissions inventories. Also as part of the revisions, new speed correction factors (SCFs) will be developed by CARB for the revised model. The new SCFs will be derived from vehicle emissions on 15 new driving cycles, each constructed to represent a typical trip at a specific average speed. This paper discusses how the new SCFs will affect transportation conformity and emissions inventory development, and evaluates the differences in total emissions produced by trip-based and link-based distributions of speed and vehicle miles of travel (VMT). We simulated both link-based and trip-based speed-VMT distributions using travel data from the Sacramento and San Diego travel demand models. On the basis of the simulation results, there is reason to expect that mobile emissions inventories constructed using the proposed trip-based philosophy will differ markedly from those constructed in the current manner. Noting that results may vary by region, increases are expected in the CO and HC inventory levels, with concomitant decreases in the NOx mobile emissions inventories.

  18. Spatially resolved flux measurements of NOx from London suggest significantly higher emissions than predicted by inventories.

    PubMed

    Vaughan, Adam R; Lee, James D; Misztal, Pawel K; Metzger, Stefan; Shaw, Marvin D; Lewis, Alastair C; Purvis, Ruth M; Carslaw, David C; Goldstein, Allen H; Hewitt, C Nicholas; Davison, Brian; Beevers, Sean D; Karl, Thomas G

    2016-07-18

    To date, direct validation of city-wide emissions inventories for air pollutants has been difficult or impossible. However, recent technological innovations now allow direct measurement of pollutant fluxes from cities, for comparison with emissions inventories, which are themselves commonly used for prediction of current and future air quality and to help guide abatement strategies. Fluxes of NOx were measured using the eddy-covariance technique from an aircraft flying at low altitude over London. The highest fluxes were observed over central London, with lower fluxes measured in suburban areas. A footprint model was used to estimate the spatial area from which the measured emissions occurred. This allowed comparison of the flux measurements to the UK's National Atmospheric Emissions Inventory (NAEI) for NOx, with scaling factors used to account for the actual time of day, day of week and month of year of the measurement. The comparison suggests significant underestimation of NOx emissions in London by the NAEI, mainly due to its under-representation of real world road traffic emissions. A comparison was also carried out with an enhanced version of the inventory using real world driving emission factors and road measurement data taken from the London Atmospheric Emissions Inventory (LAEI). The measurement to inventory agreement was substantially improved using the enhanced version, showing the importance of fully accounting for road traffic, which is the dominant NOx emission source in London. In central London there was still an underestimation by the inventory of 30-40% compared with flux measurements, suggesting significant improvements are still required in the NOx emissions inventory.

  19. Spatially resolved flux measurements of NOx from London suggest significantly higher emissions than predicted by inventories.

    PubMed

    Vaughan, Adam R; Lee, James D; Misztal, Pawel K; Metzger, Stefan; Shaw, Marvin D; Lewis, Alastair C; Purvis, Ruth M; Carslaw, David C; Goldstein, Allen H; Hewitt, C Nicholas; Davison, Brian; Beevers, Sean D; Karl, Thomas G

    2016-07-18

    To date, direct validation of city-wide emissions inventories for air pollutants has been difficult or impossible. However, recent technological innovations now allow direct measurement of pollutant fluxes from cities, for comparison with emissions inventories, which are themselves commonly used for prediction of current and future air quality and to help guide abatement strategies. Fluxes of NOx were measured using the eddy-covariance technique from an aircraft flying at low altitude over London. The highest fluxes were observed over central London, with lower fluxes measured in suburban areas. A footprint model was used to estimate the spatial area from which the measured emissions occurred. This allowed comparison of the flux measurements to the UK's National Atmospheric Emissions Inventory (NAEI) for NOx, with scaling factors used to account for the actual time of day, day of week and month of year of the measurement. The comparison suggests significant underestimation of NOx emissions in London by the NAEI, mainly due to its under-representation of real world road traffic emissions. A comparison was also carried out with an enhanced version of the inventory using real world driving emission factors and road measurement data taken from the London Atmospheric Emissions Inventory (LAEI). The measurement to inventory agreement was substantially improved using the enhanced version, showing the importance of fully accounting for road traffic, which is the dominant NOx emission source in London. In central London there was still an underestimation by the inventory of 30-40% compared with flux measurements, suggesting significant improvements are still required in the NOx emissions inventory. PMID:27098421

  20. Development of an air emissions inventory for Oak Ridge National Laboratory

    SciTech Connect

    Skipper, D.D.

    1996-08-01

    Accurate air emissions inventory is important in an effective Clean Air Act (CAA) compliance program; without it, a facility may have difficulty proving compliance with regulations or permit conditions. An emissions inventory can also serve for evaluating the applicability of new regulations (eg, Title V of CAA) and in complying with them. Therefore it is important for the inventory to be well-planned and comprehensive. Preparation of an emissions inventory for a large R&D facility such as ORNL can be a challenging task. ORNL, a government facility managed by Lockheed Martin Energy Research Corp. for US DOE, consists of more than 300 buildings on about 1,500 acres. It has several thousand diverse emission sources, including small laboratory hoods, several wastewater treatment facilities, and a steam plant. This paper describes the development of ORNL`s emissions inventory with emphasis on setting goals and identifying the scope of the inventory, identifying the emission points, developing/implementing the inventory methodology, compiling data, and evaluating the results.

  1. Effect of different emission inventories on modeled ozone and carbon monoxide in Southeast Asia

    NASA Astrophysics Data System (ADS)

    Amnuaylojaroen, T.; Barth, M. C.; Emmons, L. K.; Carmichael, G. R.; Kreasuwun, J.; Prasitwattanaseree, S.; Chantara, S.

    2014-04-01

    In order to improve our understanding of air quality in Southeast Asia, the anthropogenic emissions inventory must be well represented. In this work, we apply different anthropogenic emission inventories in the Weather Research and Forecasting Model with Chemistry (WRF-Chem) version 3.3 using MOZART gas-phase chemistry and GOCART aerosols to examine the differences in predicted carbon monoxide (CO) and ozone (O3) surface mixing ratios for Southeast Asia in March and December 2008. The anthropogenic emission inventories include the Reanalysis of the TROpospheric chemical composition (RETRO), the Intercontinental Chemical Transport Experiment-Phase B (INTEX-B), the MACCity emissions (adapted from the Monitoring Atmospheric Composition and Climate and megacity Zoom for the Environment projects), the Southeast Asia Composition, Cloud, Climate Coupling Regional Study (SEAC4RS) emissions, and a combination of MACCity and SEAC4RS emissions. Biomass burning emissions are from the Fire Inventory from NCAR (FINNv1) model. WRF-chem reasonably predicts the 2 m temperature, 10 m wind, and precipitation. In general, surface CO is underpredicted by WRF-Chem while surface O3 is overpredicted. The NO2 tropospheric column predicted by WRF-Chem has the same magnitude as observations, but tends to underpredict NO2 column over the equatorial ocean and near Indonesia. Simulations using different anthropogenic emissions produce only a slight variability of O3 and CO mixing ratios, while biomass burning emissions add more variability. The different anthropogenic emissions differ by up to 20% in CO emissions, but O3 and CO mixing ratios differ by ~4.5% and ~8%, respectively, among the simulations. Biomass burning emissions create a substantial increase for both O3 and CO by ~29% and ~16%, respectively, when comparing the March biomass burning period to December with low biomass burning emissions. The simulations show that none of the anthropogenic emission inventories are better than the

  2. Development and validation of a lead emission inventory for the Greater Cairo area.

    PubMed

    Safar, Zeinab; Labib, Mounir W; Gertler, Alan W

    2014-09-01

    Studies that investigate the environmental health risks to Cairo residents invariably conclude that lead is one of the area's major health hazards. The Cairo Air Improvement Project (CAIP), which was implemented by a team led by Chemonics International, funded by USAID in partnership with the Egyptian Environmental Affairs Agency (EEAA), started developing a lead emission inventory for the greater Cairo (GC) area in 1998. The inventory contains a list by major source of the annual lead emissions in the GC area. Uses of the inventory and associated database include developing effective regulatory and control strategies, assessing emissions trends, and conducting modeling exercises. This paper describes the development of the current lead emissions inventory (1999-2010), along with an approach to develop site specific emission factors and measurements to validate the inventory. This paper discusses the major sources of lead in the GC area, which include lead smelters, Mazout (heavy fuel oil) combustion, lead manufacturing batteries factories, copper foundries, and cement factories. Included will be the trend in the lead emissions inventory with regard to the production capacity of each source category. In addition, the lead ambient measurements from 1999 through 2010 are described and compared with the results of Source Attribution Studies (SAS) conducted in 1999, 2002, and 2010. Due to EEAA/CAIP efforts, a remarkable decrease in more than 90% in lead emissions was attained for 2007. PMID:25685523

  3. Development and validation of a lead emission inventory for the Greater Cairo area

    PubMed Central

    Safar, Zeinab; Labib, Mounir W.; Gertler, Alan W.

    2013-01-01

    Studies that investigate the environmental health risks to Cairo residents invariably conclude that lead is one of the area’s major health hazards. The Cairo Air Improvement Project (CAIP), which was implemented by a team led by Chemonics International, funded by USAID in partnership with the Egyptian Environmental Affairs Agency (EEAA), started developing a lead emission inventory for the greater Cairo (GC) area in 1998. The inventory contains a list by major source of the annual lead emissions in the GC area. Uses of the inventory and associated database include developing effective regulatory and control strategies, assessing emissions trends, and conducting modeling exercises. This paper describes the development of the current lead emissions inventory (1999–2010), along with an approach to develop site specific emission factors and measurements to validate the inventory. This paper discusses the major sources of lead in the GC area, which include lead smelters, Mazout (heavy fuel oil) combustion, lead manufacturing batteries factories, copper foundries, and cement factories. Included will be the trend in the lead emissions inventory with regard to the production capacity of each source category. In addition, the lead ambient measurements from 1999 through 2010 are described and compared with the results of Source Attribution Studies (SAS) conducted in 1999, 2002, and 2010. Due to EEAA/CAIP efforts, a remarkable decrease in more than 90% in lead emissions was attained for 2007. PMID:25685523

  4. 40 CFR 51.915 - What emissions inventory requirements apply under the 8-hour NAAQS?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... PLANS Provisions for Implementation of 8-hour Ozone National Ambient Air Quality Standard § 51.915 What... emissions inventories for these areas, the ozone-relevant data element requirements under 40 CFR part...

  5. 40 CFR 51.915 - What emissions inventory requirements apply under the 8-hour NAAQS?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... PLANS Provisions for Implementation of 8-hour Ozone National Ambient Air Quality Standard § 51.915 What... emissions inventories for these areas, the ozone-relevant data element requirements under 40 CFR part...

  6. 40 CFR 51.915 - What emissions inventory requirements apply under the 8-hour NAAQS?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PLANS Provisions for Implementation of 8-hour Ozone National Ambient Air Quality Standard § 51.915 What... emissions inventories for these areas, the ozone-relevant data element requirements under 40 CFR part...

  7. Scheduled civil aircraft emission inventories for 1992: Database development and analysis

    NASA Technical Reports Server (NTRS)

    Baughcum, Steven L.; Tritz, Terrance G.; Henderson, Stephen C.; Pickett, David C.

    1996-01-01

    This report describes the development of a three-dimensional database of aircraft fuel burn and emissions (fuel burned, NOx, CO, and hydrocarbons) from scheduled commercial aircraft for each month of 1992. The seasonal variation in aircraft emissions was calculated for selected regions (global, North America, Europe, North Atlantic, and North Pacific). A series of parametric calculations were done to quantify the possible errors introduced from making approximations necessary to calculate the global emission inventory. The effects of wind, temperature, load factor, payload, and fuel tankering on fuel burn were evaluated to identify how they might affect the accuracy of aircraft emission inventories. These emissions inventories are available for use by atmospheric scientists conducting the Atmospheric Effects of Aviation Project (AEAP) modeling studies. Fuel burned and emissions of nitrogen oxides (NOx as N02), carbon monoxide, and hydrocarbons have been calculated on a 1 degree latitude x 1 degree longitude x 1 kilometer altitude grid and delivered to NASA as electronic files.

  8. Historical evaluation of vehicle emission control in Guangzhou based on a multi-year emission inventory

    NASA Astrophysics Data System (ADS)

    Zhang, Shaojun; Wu, Ye; Liu, Huan; Wu, Xiaomeng; Zhou, Yu; Yao, Zhiliang; Fu, Lixin; He, Kebin; Hao, Jiming

    2013-09-01

    The Guangzhou government adopted many vehicle emission control policies and strategies during the five-year preparation (2005-2009) to host the 2010 Asian Games. This study established a multi-year emission inventory for vehicles in Guangzhou during 2005-2009 and estimated the uncertainty in total vehicle emissions by taking the assumed uncertainties in fleet-average emission factors and annual mileage into account. In 2009, the estimated total vehicle emissions in Guangzhou were 313 000 (242 000-387 000) tons of CO, 60 900 (54 000-70 200) tons of THC, 65 600 (56 800-74 100) tons of NOx and 2740 (2100-3400) tons of PM10. Vehicle emissions within the urban area of Guangzhou were estimated to be responsible for ˜40% of total gaseous pollutants and ˜25% of total PM10 in the entire city. Although vehicle use intensity increased rapidly in Guangzhou during 2005-2009, vehicle emissions were estimated to have been reduced by 12% for CO, 21% for THC and 20% for PM10 relative to those in 2005. NOx emissions were estimated to have remained almost constant during this period. Compared to the "without control" scenario, 19% (15%-23%) of CO, 20% (18%-23%) of THC, 9% (8%-10%) of NOx and 16% (12%-20%) of PM10 were estimated to have been mitigated from a combination of the implementation of Euro III standards for light-duty vehicles (LDVs) and heavy-duty diesel vehicles and improvement of fuel quality. This study also evaluated several enhanced vehicle emission control actions taken recently. For example, the enhanced I/M program for LDVs was estimated to reduce 11% (9%-14%) of CO, 9% (8%-10%) of THC and 2% (2%-3%) of NOx relative to total vehicle emissions in 2009. Total emission reductions by temporary traffic controls for the Asian Games were estimated equivalent to 9% (7%-11%) of CO, 9% (8%-10%) of THC, 5% (5%-6%) of NOx and 10% (8%-13%) of PM10 estimated total vehicle emissions in 2009. Those controls are essential to further vehicle emission mitigation in Guangzhou

  9. Ammonia emission factors for the NAPAP (National Acid Precipitation Assessment Program) emission inventory. Final report, January 1985-December 1986

    SciTech Connect

    Misenheimer, D.C.; Warn, T.E.; Zelmanowitz, S.

    1987-01-01

    The report provides information on certain sources of ammonia emissions to the atmosphere for use in the National Acid Precipitation Assessment Program (NAPAP) emission inventories. Major anthropogenic sources of ammonia emissions to the atmosphere are identified, and emission factors for these sources are presented based on a review of the most recent data available. The emission factors developed are used to estimate nationwide emissions for base year 1980 and are compared to ammonia emission factors used in other emission inventories. Major anthropogenic source categories covered are cropland spreading of livestock wastes, beef cattle feedlots, fertilizer manufacture and use, fuel combustion, ammonia synthesis, petroleum refineries, and coke manufacture. Approximately 840,000 tons of ammonia is estimated to have been emitted in the U.S. in 1980; over 64% of which is estimated to have been from livestock wastes.

  10. 40 CFR 52.2036 - 1990 base year emission inventory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...—Fairless Hills 1990 VOC and NOX emissions for six emission units (no. 3 blast furnace, no.1 open hearth... from the no. 3 blast furnace are zero for both pollutants. The VOC and NOX 1990 emissions from the no... Steel Company 1990 VOC and NOX emissions for three emission units (Blast Furnace Operations,...

  11. 40 CFR 52.2036 - Base year emissions inventory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... emissions for six emission units (no. 3 blast furnace, no.1 open hearth furnace, no. 1 soaking pits and no... blast furnace are zero for both pollutants. The VOC and NOX 1990 emissions from the no. 1 open hearth... Steel Company 1990 VOC and NOX emissions for three emission units (Blast Furnace Operations,...

  12. 40 CFR 52.2036 - Base year emissions inventory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... emissions for six emission units (no. 3 blast furnace, no.1 open hearth furnace, no. 1 soaking pits and no... blast furnace are zero for both pollutants. The VOC and NOX 1990 emissions from the no. 1 open hearth... Steel Company 1990 VOC and NOX emissions for three emission units (Blast Furnace Operations,...

  13. 40 CFR 52.2036 - Base year emissions inventory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... emissions for six emission units (no. 3 blast furnace, no.1 open hearth furnace, no. 1 soaking pits and no... blast furnace are zero for both pollutants. The VOC and NOX 1990 emissions from the no. 1 open hearth... Steel Company 1990 VOC and NOX emissions for three emission units (Blast Furnace Operations,...

  14. 40 CFR 52.2036 - Base year emissions inventory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... emissions for six emission units (no. 3 blast furnace, no.1 open hearth furnace, no. 1 soaking pits and no... blast furnace are zero for both pollutants. The VOC and NOX 1990 emissions from the no. 1 open hearth... Steel Company 1990 VOC and NOX emissions for three emission units (Blast Furnace Operations,...

  15. Constructing a Spatially Resolved Methane Emission Inventory for the Barnett Shale Region.

    PubMed

    Lyon, David R; Zavala-Araiza, Daniel; Alvarez, Ramón A; Harriss, Robert; Palacios, Virginia; Lan, Xin; Talbot, Robert; Lavoie, Tegan; Shepson, Paul; Yacovitch, Tara I; Herndon, Scott C; Marchese, Anthony J; Zimmerle, Daniel; Robinson, Allen L; Hamburg, Steven P

    2015-07-01

    Methane emissions from the oil and gas industry (O&G) and other sources in the Barnett Shale region were estimated by constructing a spatially resolved emission inventory. Eighteen source categories were estimated using multiple data sets, including new empirical measurements at regional O&G sites and a national study of gathering and processing facilities. Spatially referenced activity data were compiled from federal and state databases and combined with O&G facility emission factors calculated using Monte Carlo simulations that account for high emission sites representing the very upper portion, or fat-tail, in the observed emissions distributions. Total methane emissions in the 25-county Barnett Shale region in October 2013 were estimated to be 72,300 (63,400-82,400) kg CH4 h(-1). O&G emissions were estimated to be 46,200 (40,000-54,100) kg CH4 h(-1) with 19% of emissions from fat-tail sites representing less than 2% of sites. Our estimate of O&G emissions in the Barnett Shale region was higher than alternative inventories based on the United States Environmental Protection Agency (EPA) Greenhouse Gas Inventory, EPA Greenhouse Gas Reporting Program, and Emissions Database for Global Atmospheric Research by factors of 1.5, 2.7, and 4.3, respectively. Gathering compressor stations, which accounted for 40% of O&G emissions in our inventory, had the largest difference from emission estimates based on EPA data sources. Our inventory's higher O&G emission estimate was due primarily to its more comprehensive activity factors and inclusion of emissions from fat-tail sites.

  16. Constructing a Spatially Resolved Methane Emission Inventory for the Barnett Shale Region.

    PubMed

    Lyon, David R; Zavala-Araiza, Daniel; Alvarez, Ramón A; Harriss, Robert; Palacios, Virginia; Lan, Xin; Talbot, Robert; Lavoie, Tegan; Shepson, Paul; Yacovitch, Tara I; Herndon, Scott C; Marchese, Anthony J; Zimmerle, Daniel; Robinson, Allen L; Hamburg, Steven P

    2015-07-01

    Methane emissions from the oil and gas industry (O&G) and other sources in the Barnett Shale region were estimated by constructing a spatially resolved emission inventory. Eighteen source categories were estimated using multiple data sets, including new empirical measurements at regional O&G sites and a national study of gathering and processing facilities. Spatially referenced activity data were compiled from federal and state databases and combined with O&G facility emission factors calculated using Monte Carlo simulations that account for high emission sites representing the very upper portion, or fat-tail, in the observed emissions distributions. Total methane emissions in the 25-county Barnett Shale region in October 2013 were estimated to be 72,300 (63,400-82,400) kg CH4 h(-1). O&G emissions were estimated to be 46,200 (40,000-54,100) kg CH4 h(-1) with 19% of emissions from fat-tail sites representing less than 2% of sites. Our estimate of O&G emissions in the Barnett Shale region was higher than alternative inventories based on the United States Environmental Protection Agency (EPA) Greenhouse Gas Inventory, EPA Greenhouse Gas Reporting Program, and Emissions Database for Global Atmospheric Research by factors of 1.5, 2.7, and 4.3, respectively. Gathering compressor stations, which accounted for 40% of O&G emissions in our inventory, had the largest difference from emission estimates based on EPA data sources. Our inventory's higher O&G emission estimate was due primarily to its more comprehensive activity factors and inclusion of emissions from fat-tail sites. PMID:26148553

  17. 40 CFR 62.4622 - Emission inventories, source surveillance, reports.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... not provide for the disclosure of emission data, as correlated with applicable emission standards, to... correlated with applicable emission limitations and other control measures that are part of the...

  18. 40 CFR 62.4622 - Emission inventories, source surveillance, reports.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... not provide for the disclosure of emission data, as correlated with applicable emission standards, to... correlated with applicable emission limitations and other control measures that are part of the...

  19. Modeling Ozone in the Eastern United States Using a Fuel-Based Mobile Source Emissions Inventory

    NASA Astrophysics Data System (ADS)

    Mcdonald, B. C.; Ahmadov, R.; McKeen, S. A.; Kim, S. W.; Frost, G. J.; Trainer, M.

    2015-12-01

    A fuel-based mobile source emissions inventory of nitrogen oxides (NOx) and carbon monoxide (CO) is developed for the continental US. Emissions are mapped for the year 2013, including emissions from on-road gasoline and diesel vehicles, and off-road engines. We find that mobile source emissions of NOx in the National Emissions Inventory 2011 (NEI11) are 50-60% higher than results from this study; mobile sources contribute around half of total US anthropogenic NOx emissions. We model chemistry and transport of emissions from the NEI11 and our fuel-based inventory during the Southeast Nexus (SENEX) Study period in the summer of 2013, using the Weather Research and Forecasting with Chemistry (WRF-Chem) model. In the Eastern US, there is a consistent over-prediction of tropospheric ozone (O3) levels when simulating emissions from the NEI11, with the largest biases located in the Southeastern US. Using our fuel-based inventory, we test O3 sensitivity to lower NOx emissions. We highlight results in the Southeast, a region with significant interactions between anthropogenic and biogenic emissions of ozone precursors. Model results of NOy, CO, and O3 are compared with aircraft measurements made during SENEX.

  20. Emission Inventory for PFOS in China: Review of Past Methodologies and Suggestions

    PubMed Central

    Lim, Theodore Chao; Wang, Bin; Huang, Jun; Deng, Shubo; Yu, Gang

    2011-01-01

    Perfluorooctane sulfonate (PFOS) is a persistent, bioaccumulative, and toxic chemical that has the potential for long-range transport in the environment. Its use in a wide variety of consumer products and industrial processes makes a detailed characterization of its emissions sources very challenging. These varied emissions sources all contribute to PFOS' existence within nearly all environmental media. Currently, China is the only country documented to still be producing PFOS, though there is no China PFOS emission inventory available. This study reviews the inventory methodologies for PFOS in other countries to suggest a China-specific methodology framework for a PFOS emission inventory. The suggested framework combines unknowns for PFOS-containing product penetration into the Chinese market with product lifecycle assumptions, centralizing these diverse sources into municipal sewage treatment plants. Releases from industrial sources can be quantified separately using another set of emission factors. Industrial sources likely to be relevant to the Chinese environment are identified. PMID:22125449

  1. Mapping the spatial distribution of global anthropogenic mercury atmospheric emission inventories

    NASA Astrophysics Data System (ADS)

    Wilson, Simon J.; Steenhuisen, Frits; Pacyna, Jozef M.; Pacyna, Elisabeth G.

    This paper describes the procedures employed to spatially distribute global inventories of anthropogenic emissions of mercury to the atmosphere, prepared by Pacyna, E.G., Pacyna, J.M., Steenhuisen, F., Wilson, S. [2006. Global anthropogenic mercury emission inventory for 2000. Atmospheric Environment, this issue, doi:10.1016/j.atmosenv.2006.03.041], and briefly discusses the results of this work. A new spatially distributed global emission inventory for the (nominal) year 2000, and a revised version of the 1995 inventory are presented. Emissions estimates for total mercury and major species groups are distributed within latitude/longitude-based grids with a resolution of 1×1 and 0.5×0.5°. A key component in the spatial distribution procedure is the use of population distribution as a surrogate parameter to distribute emissions from sources that cannot be accurately geographically located. In this connection, new gridded population datasets were prepared, based on the CEISIN GPW3 datasets (CIESIN, 2004. Gridded Population of the World (GPW), Version 3. Center for International Earth Science Information Network (CIESIN), Columbia University and Centro Internacional de Agricultura Tropical (CIAT). GPW3 data are available at http://beta.sedac.ciesin.columbia.edu/gpw/index.jsp). The spatially distributed emissions inventories and population datasets prepared in the course of this work are available on the Internet at www.amap.no/Resources/HgEmissions/

  2. Modelling African aerosol using updated fossil fuel and biofuel emission inventories for 2005 and 2030

    NASA Astrophysics Data System (ADS)

    Liousse, C.; Penner, J. E.; Assamoi, E.; Xu, L.; Criqui, P.; Mima, S.; Guillaume, B.; Rosset, R.

    2010-12-01

    A regional fossil fuel and biofuel emission inventory for particulates has been developed for Africa at a resolution of 0.25° x 0.25° for the year 2005. The original database of Junker and Liousse (2008) was used after modification for updated regional fuel consumption and emission factors. Consumption data were corrected after direct inquiries conducted in Africa, including a new emitter category (i.e. two-wheel vehicles including “zemidjans”) and a new activity sector (i.e. power plants) since both were not considered in the previous emission inventory. Emission factors were measured during the 2005 AMMA campaign (Assamoi and Liousse, 2010) and combustion chamber experiments. Two prospective inventories for 2030 are derived based on this new regional inventory and two energy consumption forecasts by the Prospective Outlook on Long-term Energy Systems (POLES) model (Criqui, 2001). The first is a reference scenario, where no emission controls beyond those achieved in 2003 are taken into account, and the second is for a "clean" scenario where possible and planned policies for emission control are assumed to be effective. BC and OCp emission budgets for these new inventories will be discussed and compared to the previous global dataset. These new inventories along with the most recent open biomass burning inventory (Liousse et al., 2010) have been tested in the ORISAM-TM5 global chemistry-climate model with a focus over Africa at a 1° x 1° resolution. Global simulations for BC and primary OC for the years 2005 and 2030 are carried out and the modelled particulate concentrations for 2005 are compared to available measurements in Africa. Finally, BC and OC radiative properties (aerosol optical depths and single scattering albedo) are calculated and the direct radiative forcing is estimated using an off line model (Wang and Penner, 2009). Results of sensitivity tests driven with different emission scenarios will be presented.

  3. Dynamic Evaluation of Regional Air Quality Model's Response to Emission Reductions in the Presence of Uncertain Emission Inventories

    EPA Science Inventory

    A method is presented and applied for evaluating an air quality model’s changes in pollutant concentrations stemming from changes in emissions while explicitly accounting for the uncertainties in the base emission inventory. Specifically, the Community Multiscale Air Quality (CMA...

  4. A comparative analysis of two highly spatially resolved European atmospheric emission inventories

    NASA Astrophysics Data System (ADS)

    Ferreira, J.; Guevara, M.; Baldasano, J. M.; Tchepel, O.; Schaap, M.; Miranda, A. I.; Borrego, C.

    2013-08-01

    A reliable emissions inventory is highly important for air quality modelling applications, especially at regional or local scales, which require high resolutions. Consequently, higher resolution emission inventories have been developed that are suitable for regional air quality modelling. This research performs an inter-comparative analysis of different spatial disaggregation methodologies of atmospheric emission inventories. This study is based on two different European emission inventories with different spatial resolutions: 1) the EMEP (European Monitoring and Evaluation Programme) inventory and 2) an emission inventory developed by the TNO (Netherlands Organisation for Applied Scientific Research). These two emission inventories were converted into three distinct gridded emission datasets as follows: (i) the EMEP emission inventory was disaggregated by area (EMEParea) and (ii) following a more complex methodology (HERMES-DIS - High-Elective Resolution Modelling Emissions System - DISaggregation module) to understand and evaluate the influence of different disaggregation methods; and (iii) the TNO gridded emissions, which are based on different emission data sources and different disaggregation methods. A predefined common grid with a spatial resolution of 12 × 12 km2 was used to compare the three datasets spatially. The inter-comparative analysis was performed by source sector (SNAP - Selected Nomenclature for Air Pollution) with emission totals for selected pollutants. It included the computation of difference maps (to focus on the spatial variability of emission differences) and a linear regression analysis to calculate the coefficients of determination and to quantitatively measure differences. From the spatial analysis, greater differences were found for residential/commercial combustion (SNAP02), solvent use (SNAP06) and road transport (SNAP07). These findings were related to the different spatial disaggregation that was conducted by the TNO and HERMES

  5. A Self-Consistent Global Emissions Inventory Spanning 1850-2050 – Why We Need One

    EPA Science Inventory

    While emissions inventory development has advanced significantly in recent years, the scientific community still lacks a global inventory utilizing consistent estimation approaches spanning multiple centuries. In this analysis, we investigate the strengths and weakness of curre...

  6. Improving high resolution emission inventories with local proxies and urban eddy covariance flux measurements

    NASA Astrophysics Data System (ADS)

    Gioli, Beniamino; Gualtieri, Giovanni; Busillo, Caterina; Calastrini, Francesca; Zaldei, Alessandro; Toscano, Piero

    2015-08-01

    Emission inventories are the fundamental official data on atmospheric emissions of pollutants and greenhouse gases at a variety of spatial and temporal scales worldwide. This study makes use of direct CO2 emission measurements made with the eddy covariance technique over a completely urbanized area, with no confounding effect of vegetation, where emissions are mostly controlled by natural gas combustion processes and road traffic. Objectives are: i) to validate top-down spatially and temporally disaggregated emission inventories at yearly, monthly, weekly and hourly time scales; ii) to quantify the improvement achieved in official inventories when replacing built-in temporal disaggregation proxies with customized proxies based on local data of road traffic and natural gas consumption. We demonstrate that the overall performance of official inventory at yearly scale is rather good with an emission of 3.08 g CO2 m-2 h-1 against a measured emission of 3.21 ± 0.12 g CO2 m-2 h-1. When temporally disaggregating annual emissions, the agreement between inventory and observations always significantly improves when using local proxies, by 47% (from 0.70 to 0.37 g CO2 m-2 h-1 RMSE) at monthly scale, by 26% (from 0.58 to 0.43 g CO2 m-2 h-1 RMSE) at weekly scale, and by 32% (from 1.26 to 0.85 g CO2 m-2 h-1 RMSE), at hourly scale. The validity of this analysis goes beyond CO2 since the temporal proxies used by the inventories mimic the intensity of specific emission processes, therefore species emitted in the same processes as CO2, would benefit from the improved parameterization of temporal proxies shown here. These results indicate that effort should be put into developing improved temporal proxies based on local rather than national scale data, that can better mimic site dependent behaviors.

  7. Updated emission inventories for speciated atmospheric mercury from anthropogenic sources in China.

    PubMed

    Zhang, Lei; Wang, Shuxiao; Wang, Long; Wu, Ye; Duan, Lei; Wu, Qingru; Wang, Fengyang; Yang, Mei; Yang, Hai; Hao, Jiming; Liu, Xiang

    2015-03-01

    China is the largest contributor to global atmospheric mercury (Hg), and accurate emission inventories in China are needed to reduce large gaps existing in global Hg mass balance estimates and assess Hg effects on various ecosystems. The China Atmospheric Mercury Emission (CAME) model was developed in this study using probabilistic emission factors generated from abundant on-site measurements and literature data. Using this model, total anthropogenic Hg emissions were estimated to be continuously increasing from 356 t in 2000 to 538 t in 2010 with an average annual increase rate of 4.2%. Industrial coal combustion, coal-fired power plants, nonferrous metal smelting, and cement production were identified to be the dominant Hg emission sources in China. The ten largest contributing provinces accounted for nearly 60% of the total Hg emissions in 2010. Speciated Hg emission inventory was developed over China with a grid-resolution of 36 × 36 km, providing needed emission fields for Hg transport models. In this new inventory, the sectoral Hg speciation profiles were significantly improved based on the latest data from field measurements and more detailed technology categorization. The overall uncertainties of the newly developed inventory were estimated to be in the range of -20% to +23%.

  8. TEMPORALLY-RESOLVED AMMONIA EMISSION INVENTORIES: CURRENT ESTIMATES, EVALUATION TOOLS, AND MEASUREMENT NEEDS

    EPA Science Inventory

    In this study, we evaluate the suitability of a three-dimensional chemical transport model (CTM) as a tool for assessing ammonia emission inventories, calculate the improvement in CTM performance owing to recent advances in temporally-varying ammonia emission estimates, and ident...

  9. Monthly and spatially resolved black carbon emission inventory of India: uncertainty analysis

    NASA Astrophysics Data System (ADS)

    Paliwal, Umed; Sharma, Mukesh; Burkhart, John F.

    2016-10-01

    Black carbon (BC) emissions from India for the year 2011 are estimated to be 901.11 ± 151.56 Gg yr-1 based on a new ground-up, GIS-based inventory. The grid-based, spatially resolved emission inventory includes, in addition to conventional sources, emissions from kerosene lamps, forest fires, diesel-powered irrigation pumps and electricity generators at mobile towers. The emissions have been estimated at district level and were spatially distributed onto grids at a resolution of 40 × 40 km2. The uncertainty in emissions has been estimated using a Monte Carlo simulation by considering the variability in activity data and emission factors. Monthly variation of BC emissions has also been estimated to account for the seasonal variability. To the total BC emissions, domestic fuels contributed most significantly (47 %), followed by industry (22 %), transport (17 %), open burning (12 %) and others (2 %). The spatial and seasonal resolution of the inventory will be useful for modeling BC transport in the atmosphere for air quality, global warming and other process-level studies that require greater temporal resolution than traditional inventories.

  10. CHANGES TO THE BIOGENIC EMISSION INVENTORY SYSTEM VERSION 3 (BEIS3)

    EPA Science Inventory

    This extended abstract describes recent changes to the Biogenic Emissions Inventory System (BEIS3) that were completed in preparation for the 2005 release of the Community Multiscale Air Quality model. Changes to the model affect the calculated emissions of isoprene and monoterp...

  11. Evaluating BC and NOx emission inventories for the Paris region from MEGAPOLI aircraft measurements

    NASA Astrophysics Data System (ADS)

    Petetin, H.; Beekmann, M.; Colomb, A.; Denier van der Gon, H. A. C.; Dupont, J.-C.; Honoré, C.; Michoud, V.; Morille, Y.; Perrussel, O.; Schwarzenboeck, A.; Sciare, J.; Wiedensohler, A.; Zhang, Q. J.

    2015-09-01

    High uncertainties affect black carbon (BC) emissions, and, despite its important impact on air pollution and climate, very few BC emissions evaluations are found in the literature. This paper presents a novel approach, based on airborne measurements across the Paris, France, plume, developed in order to evaluate BC and NOx emissions at the scale of a whole agglomeration. The methodology consists in integrating, for each transect, across the plume observed and simulated concentrations above background. This allows for several error sources (e.g., representativeness, chemistry, plume lateral dispersion) to be minimized in the model used. The procedure is applied with the CHIMERE chemistry-transport model to three inventories - the EMEP inventory and the so-called TNO and TNO-MP inventories - over the month of July 2009. Various systematic uncertainty sources both in the model (e.g., boundary layer height, vertical mixing, deposition) and in observations (e.g., BC nature) are discussed and quantified, notably through sensitivity tests. Large uncertainty values are determined in our results, which limits the usefulness of the method to rather strongly erroneous emission inventories. A statistically significant (but moderate) overestimation is obtained for the TNO BC emissions and the EMEP and TNO-MP NOx emissions, as well as for the BC / NOx emission ratio in TNO-MP. The benefit of the airborne approach is discussed through a comparison with the BC / NOx ratio at a ground site in Paris, which additionally suggests a spatially heterogeneous error in BC emissions over the agglomeration.

  12. Emissions Inventory of PM2.5 Trace Elements across the United States

    EPA Science Inventory

    This paper presents the first National Emissions Inventory (NEI) of fine particulate matter (PM2.5) that includes the full suite of PM2.5 trace elements (atomic number >10) measured at ambient monitoring sites across the U.S. PM 2.5 emissions in ...

  13. Inventory of Alabama greenhouse gas emissions and sinks: 1990

    SciTech Connect

    Li, Chumeng; Herz, W.J.; Griffin, R.A.

    1996-12-31

    Greenhouse gas concentrations in the atmosphere have been increasing since the industrial revolution. Worldwide efforts are being made to study anthropogenic greenhouse gas emissions. This study quantified the anthropogenic greenhouse gas emissions in Alabama in 1990. Alabama anthropogenic greenhouse gas emissions and sinks from 13 sources were studied. 1990 Alabama total anthropogenic greenhouse gas emissions and sinks were estimated to be 153.42 and 21.66 million tons of carbon dioxide equivalent. As a result, the net total greenhouse gas emissions were estimated to be 131.76 million tons of carbon dioxide equivalent. Fossil fuel combustion is the major source of emissions, representing approximately 78 percent. Coal mining and landfills are other two significant emission sources, representing approximately 10 and 6 percent of the total emissions respectively. Forests in Alabama represent the major sink, offsetting approximately 14 percent of the total emissions. On a per capita basis, Alabama`s emission rate is 32.3 tons of carbon dioxide equivalent per capita in 1990, compared to the national per capita average of 23.4 tons of carbon dioxide equivalent. The high emission rate is attributed to higher emissions than the national average from fossil fuel combustion, from coal mining and landfills in Alabama.

  14. Development of emission factors and emission inventories for motorcycles and light duty vehicles in the urban region in Vietnam.

    PubMed

    Tung, H D; Tong, H Y; Hung, W T; Anh, N T N

    2011-06-15

    This paper reports on a 2-year emissions monitoring program launched by the Centre for Environmental Monitoring of the Vietnam Environment Administration which aimed at determining emission factors and emission inventories for two typical types of vehicle in Hanoi, Vietnam. The program involves four major activities. A database for motorcycles and light duty vehicles (LDV) in Hanoi was first compiled through a questionnaire survey. Then, two typical driving cycles were developed for the first time for motorcycles and LDVs in Hanoi. Based on this database and the developed driving cycles for Hanoi, a sample of 12 representative test vehicles were selected to determine vehicle specific fuel consumption and emission factors (CO, HC, NOx and CO(2)). This set of emission factors were developed for the first time in Hanoi with due considerations of local driving characteristics. In particular, it was found that the emission factors derived from Economic Commission for Europe (ECE) driving cycles and adopted in some previous studies were generally overestimated. Eventually, emission inventories for motorcycles and LDVs were derived by combining the vehicle population data, the developed vehicle specific emission factors and vehicle kilometre travelled (VKT) information from the survey. The inventory suggested that motorcycles contributed most to CO, HC and NOx emissions while LDVs appeared to be more fuel consuming.

  15. Methodology for Airborne Quantification of NOx fluxes over Central London and Comparison to Emission Inventories

    NASA Astrophysics Data System (ADS)

    Vaughan, A. R.; Lee, J. D.; Lewis, A. C.; Purvis, R.; Carslaw, D.; Misztal, P. K.; Metzger, S.; Beevers, S.; Goldstein, A. H.; Hewitt, C. N.; Shaw, M.; Karl, T.; Davison, B.

    2015-12-01

    The emission of pollutants is a major problem in today's cities. Emission inventories are a key tool for air quality management, with the United Kingdom's National and London Atmospheric Emission Inventories (NAEI & LAEI) being good examples. Assessing the validity of such inventoried is important. Here we report on the technical methodology of matching flux measurements of NOx over a city to inventory estimates. We used an eddy covariance technique to directly measure NOx fluxes from central London on an aircraft flown at low altitude. NOx mixing ratios were measured at 10 Hz time resolution using chemiluminescence (to measure NO) and highly specific photolytic conversion of NO2 to NO (to measure NO2). Wavelet transformation was used to calculate instantaneous fluxes along the flight track for each flight leg. The transformation allows for both frequency and time information to be extracted from a signal, where we quantify the covariance between the de-trended vertical wind and concentration to derive a flux. Comparison between the calculated fluxes and emission inventory data was achieved using a footprint model, which accounts for contributing source. Using both a backwards lagrangian model and cross-wind dispersion function, we find the footprint extent ranges from 5 to 11 Km in distance from the sample point. We then calculate a relative weighting matrix for each emission inventory within the calculated footprint. The inventories are split into their contributing source sectors with each scaled using up to date emission factors, giving a month; day and hourly scaled estimate which is then compared to the measurement.

  16. Spatially Resolved Emissions of NOx and VOCs and Comparison to Inventories.

    NASA Astrophysics Data System (ADS)

    Vaughan, A. R.; Lee, J. D.; Lewis, A. C.; Shaw, M.; Purvis, R.; Carslaw, D.; Hewitt, C. N.; Misztal, P. K.; Metzger, S.; Beevers, S.; Goldstein, A. H.; Karl, T.; Davison, B.

    2015-12-01

    Recent trends in ambient concentrations of NOx in the UK (and other European countries) have shown a general decrease over the period 1990 to 2002, followed by largely static concentrations from 2004 - present. This is not in line with the decreases predicted based on bottom up emission inventories and has lead to widespread non-compliance with EU Air Quality Directives. We present a method to quantify the geographic variability of emission of NOx and selected VOCs at a city scale (London) using an aircraft platform. High frequency observations of NOx and VOCs (10 Hz and 2 Hz, respectively) were made using low altitude flights across London and combined with 20 Hz micro-meteorological data to provide an emission flux using the aircraft eddy covariance technique. A continuous wavelet transformation was used to produce instantaneous fluxes along the flight transect and a parameterisation of a backward Lagrangian model used to calculate the flux footprint, attributing emission rates to specific areas in Greater London (see figure). The observed flux was compared to the UK National Atmospheric Emission Inventory (NAEI), which takes a "bottom up" approach to calculating emissions, involving estimates from different source sectors to produce yearly emission estimates. These were then modified using factors specific to each source to reflect the actual month, day and time of the flight, to provide a more meaningful comparison to the observation. A significant underestimation in the inventory NOx was observed ranging from 150-200% in outer London, to 300% in the central area. Potential reasons for this are discussed, including the poor treatment of real world emissions of NOx from diesel vehicles in the inventory. We also compare measurements to the London Atmospheric Emissions Inventory (LAEI), which provides a more explicit treatment of the traffic emissions specific to London and which shows better agreement with the measurements.

  17. A comprehensive approach for the evaluation and comparison of emission inventories in Madrid

    NASA Astrophysics Data System (ADS)

    Vedrenne, Michel; Borge, Rafael; Lumbreras, Julio; Rodríguez, María Encarnación; de la Paz, David; Pérez, Javier; Manuel de Andrés, Juan; Quaassdorff, Christina

    2016-11-01

    Emission inventories provide a description of the polluting activities that occur across a specific geographic domain, and are widely used as input for air quality modelling for the assessment of compliance with environmental legislation. The spatial scale to which these inventories are referred has an influence in the representativeness of the emission estimates, as these are underpinned by a number of considerations and data with different levels of granularity. This study proposes a comprehensive framework for the evaluation of emission inventories that allows identifying methodological issues by examining differences in performance to a chemical transport model (CTM) when such inventories are used as input. To demonstrate the approach, a comparison between the national and regional emissions inventories for the Autonomous Community of Madrid (ACM) was carried out (NEI and REI respectively). The analysis revealed discrepancies in compilation methodologies for the domestic sector (SNAP 02), industrial combustion (SNAP 03), road traffic (SNAP 07) and other mobile sources (SNAP 08); most of the differences were originally caused by taking into account different activity variables, fuel mixes, and spatial disaggregation and allocation proxies. The granularity of the base data (statistics, fuel consumption, facilities, etc.) proved to be an essential limiting factor, which means that whenever bottom-up approaches were followed, the description of emission sectors tended to be more accurate.

  18. An Evaluation of Aircraft Emissions Inventory Methodology by Comparisons with Reported Airline Data

    NASA Technical Reports Server (NTRS)

    Daggett, D. L.; Sutkus, D. J.; DuBois, D. P.; Baughcum, S. L.

    1999-01-01

    This report provides results of work done to evaluate the calculation methodology used in generating aircraft emissions inventories. Results from the inventory calculation methodology are compared to actual fuel consumption data. Results are also presented that show the sensitivity of calculated emissions to aircraft payload factors. Comparisons of departures made, ground track miles flown and total fuel consumed by selected air carriers were made between U.S. Dept. of Transportation (DOT) Form 41 data reported for 1992 and results of simplified aircraft emissions inventory calculations. These comparisons provide an indication of the magnitude of error that may be present in aircraft emissions inventories. To determine some of the factors responsible for the errors quantified in the DOT Form 41 analysis, a comparative study of in-flight fuel flow data for a specific operator's 747-400 fleet was conducted. Fuel consumption differences between the studied aircraft and the inventory calculation results may be attributable to several factors. Among these are longer flight times, greater actual aircraft weight and performance deterioration effects for the in-service aircraft. Results of a parametric study on the variation in fuel use and NOx emissions as a function of aircraft payload for different aircraft types are also presented.

  19. Development of a stationary carbon emission inventory for Shanghai using pollution source census data

    NASA Astrophysics Data System (ADS)

    Li, Xianzhe; Jiang, Ping; Zhang, Yan; Ma, Weichun

    2016-03-01

    This study utilizes 521,631 activity data points from the 2007 Shanghai Pollution Source Census to compile a stationary carbon emission inventory for Shanghai. The inventory generated from our dataset shows that a large portion of Shanghai's total energy use consists of coal-oriented energy consumption. The electricity and heat production industries, iron and steel mills, and the petroleum refining industry are the main carbon emitters. In addition, most of these industries are located in Baoshan District, which is Shanghai's largest contributor of carbon emissions. Policy makers can use the enterpriselevel carbon emission inventory and the method designed in this study to construct sound carbon emission reduction policies. The carbon trading scheme to be established in Shanghai based on the developed carbon inventory is also introduced in this paper with the aim of promoting the monitoring, reporting and verification of carbon trading. Moreover, we believe that it might be useful to consider the participation of industries, such as those for food processing, beverage, and tobacco, in Shanghai's carbon trading scheme. Based on the results contained herein, we recommend establishing a comprehensive carbon emission inventory by inputting data from the pollution source census used in this study.

  20. An approach for verifying biogenic greenhouse gas emissions inventories with atmospheric CO 2 concentration data

    DOE PAGES

    Ogle, Stephen; Davis, Kenneth J.; Lauvaux, Thomas; Schuh, Andrew E.; Cooley, Dan; West, Tristram O.; Heath, L.; Miles, Natasha; Richardson, S. J.; Breidt, F. Jay; et al

    2015-03-10

    Verifying national greenhouse gas (GHG) emissions inventories is a critical step to ensure that reported emissions data to the United Nations Framework Convention on Climate Change (UNFCCC) are accurate and representative of a country’s contribution to GHG concentrations in the atmosphere. Verification could include a variety of evidence, but arguably the most convincing verification would be confirmation of a change in GHG concentrations in the atmosphere that is consistent with reported emissions to the UNFCCC. We report here on a case study evaluating this option based on a prototype atmospheric CO2 measurement network deployed in the Mid-Continent Region of themore » conterminous United States. We found that the atmospheric CO2 measurement data did verify the accuracy of the emissions inventory within the confidence limits of the emissions estimates, suggesting that this technology could be further developed and deployed more widely in the future for verifying reported emissions.« less

  1. Temporal and spatial distribution of atmospheric antimony emission inventories from coal combustion in China.

    PubMed

    Tian, H Z; Zhao, D; He, M C; Wang, Y; Cheng, K

    2011-06-01

    A multiple-year inventory of atmospheric antimony (Sb) emissions from coal combustion in China for the period of 1980-2007 has been calculated for the first time. Specifically, the emission inventories of Sb from 30 provinces and 4 economic sectors (thermal power, industry, residential use, and others) are evaluated and analyzed in detail. It shows that the total Sb emissions released from coal combustion in China have increased from 133.19 t in 1980 to 546.67 t in 2007, at an annually average growth rate of 5.4%. The antimony emissions are largely emitted by industrial sector and thermal power generation sector, contributing 53.6% and 26.9% of the totals, respectively. At provincial level, the distribution of Sb emissions shows significant variation. Between 2005 and 2007, provinces always rank at the top five largest Sb emissions are: Guizhou, Hunan, Hebei, Shandong, and Anhui.

  2. Ammonia emissions in Europe, part I: Development of a dynamical ammonia emission inventory

    NASA Astrophysics Data System (ADS)

    Backes, Anna; Aulinger, Armin; Bieser, Johannes; Matthias, Volker; Quante, Markus

    2016-04-01

    Nitrogen input from agricultural ammonia emissions into the environment causes numerous environmental and health problems. The purpose of this study is to present and evaluate an improved ammonia emission inventory based on a dynamical temporal parameterization suitable to compare and assess ammonia abatement strategies. The setup of the dynamical time profile (DTP) consists of individual temporal profiles for ammonia emissions, calculated for each model grid cell, depending on temperature, crop type, fertilizer and manure application, as well as on local legislation. It is based on the method of Skjøth et al., 2004 and Gyldenkærne et al., 2005. The method has been modified to cover the study area and to improve the performance of the emission model. To compare the results of the dynamical approach with the results of the static time profile (STP) the ammonia emission parameterizations have been implemented in the SMOKE for Europe emission model. Furthermore, the influence on secondary aerosol formation in the North Sea region and possible changes triggered through the use of a modified temporal distribution of ammonia emissions were analysed with the CMAQ chemistry transport model. The results were evaluated with observations of the European Monitoring and Evaluation Programme (EMEP). The correlation coefficient of NH3 improved significantly for 12 out of 16 EMEP measurement stations and an improvement in predicting the Normalized Mean Error can be seen for particulate NH4+ and NO3-. The prediction of the 95th percentile of the daily average concentrations has improved for NH3, NH4+ and NO3-. The NH3 concentration modelled with the STP is 157% higher in winter, and about 22% lower in early summer than the one modelled with the new DTP. Consequently, the influence of the DTP on the formation of secondary aerosols is particularly noticeable in winter, when the PM2.5 concentration is 25% lower in comparison to the use of STP for temporal disaggregation. Besides

  3. Effect of different emission inventories on modeled ozone and carbon monoxide in Southeast Asia

    NASA Astrophysics Data System (ADS)

    Amnuaylojaroen, T.; Barth, M. C.; Emmons, L. K.; Carmichael, G. R.; Kreasuwun, J.; Prasitwattanaseree, S.; Chantara, S.

    2014-12-01

    In order to improve our understanding of air quality in Southeast Asia, the anthropogenic emissions inventory must be well represented. In this work, we apply different anthropogenic emission inventories in the Weather Research and Forecasting Model with Chemistry (WRF-Chem) version 3.3 using Model for Ozone and Related Chemical Tracers (MOZART) gas-phase chemistry and Global Ozone Chemistry Aerosol Radiation and Transport (GOCART) aerosols to examine the differences in predicted carbon monoxide (CO) and ozone (O3) surface mixing ratios for Southeast Asia in March and December 2008. The anthropogenic emission inventories include the Reanalysis of the TROpospheric chemical composition (RETRO), the Intercontinental Chemical Transport Experiment-Phase B (INTEX-B), the MACCity emissions (adapted from the Monitoring Atmospheric Composition and Climate and megacity Zoom for the Environment projects), the Southeast Asia Composition, Cloud, Climate Coupling Regional Study (SEAC4RS) emissions, and a combination of MACCity and SEAC4RS emissions. Biomass-burning emissions are from the Fire Inventory from the National Center for Atmospheric Research (NCAR) (FINNv1) model. WRF-Chem reasonably predicts the 2 m temperature, 10 m wind, and precipitation. In general, surface CO is underpredicted by WRF-Chem while surface O3 is overpredicted. The NO2 tropospheric column predicted by WRF-Chem has the same magnitude as observations, but tends to underpredict the NO2 column over the equatorial ocean and near Indonesia. Simulations using different anthropogenic emissions produce only a slight variability of O3 and CO mixing ratios, while biomass-burning emissions add more variability. The different anthropogenic emissions differ by up to 30% in CO emissions, but O3 and CO mixing ratios averaged over the land areas of the model domain differ by ~4.5% and ~8%, respectively, among the simulations. Biomass-burning emissions create a substantial increase for both O3 and CO by ~29% and ~16

  4. IES. Air Emission, Liquid Effluent Inventory and Reporting

    SciTech Connect

    Chapman, T.

    1996-10-01

    The IES maintains an inventory of radiological air and liquid effluents released to the atmosphere. The IES utilizes the official stack numbers. Data may be entered by generators for any monitoring time period. Waste volumes released as well as their radiological constituents are tracked. The IES provides data to produce a report for NESHAPS as well as several administrative action/anomaly reports. These reports flag unusual occurences (releases) that are above normal range releases.

  5. Development of Future Scenario Emission Inventories for East Asia in Support of Multiple Modeling Studies

    NASA Astrophysics Data System (ADS)

    Kim, Y.; Woo, J. H.; Choi, K. C.; Lee, J. B.; Song, C. K.; Kim, S. K.; Hong, J.; Hong, S. C.; Zhang, Q.; Hong, C.; Tong, D.

    2015-12-01

    Future emission scenarios based on up-to-date regional socio-economic and control policy information were developed in support of climate-air quality integrated modeling research over East Asia. Two IPCC-participated Integrated Assessment Models(IAMs) were used to developed those scenario pathways. The two emission processing systems, KU-EPS and SMOKE-Asia, were used to convert these future scenario emissions to comprehensive chemical transport model-ready form. The NIER/KU-CREATE (Comprehensive Regional Emissions inventory for Atmospheric Transport Experiment) served as the regional base-year emission inventory. For anthropogenic emissions, it has 54 fuel classes, 201 sub-sectors and 13 pollutants, including CO2, CH4, N2O, SO2, NOx, CO, NMVOC, NH3, OC, BC, PM10, PM2.5, and mercury. Fast energy growth and aggressive penetration of the control measures make emissions projection very active for East Asia. Despite of more stringent air pollution control policies by the governments, however, air quality over the region seems not been improved as much - even worse in many cases. The needs of more scientific understanding of inter-relationship among emissions, transport, chemistry over the region are very high to effectively protect public health and ecosystems against ozone, fine particles, and other toxic pollutants in the air. After developing these long-term future emissions, therefore, we also tried to apply our future scenarios to develop the present emissions inventory for chemical weather forecasting and aircraft field campaign. On site, we will present; 1) the future scenario development framework and process methodologies, 2) initial development results of the future emission pathways, 3) present emission inventories from short-term projection, and 4) air quality modeling performance improvements over the region.

  6. A Global inventory of volatile organic compound emissions from anthropogenic sources

    NASA Astrophysics Data System (ADS)

    Piccot, Stephen D.; Watson, Joel J.; Jones, Julian W.

    1992-06-01

    As part of an effort to assess the potential impacts associated with global climate change, the U.S. Environmental Protection Agency's Office of Research and Development is supporting global atmospheric chemistry research by developing global scale estimates of volatile organic compound (VOC) emissions (excluding methane). Atmospheric chemistry models require, as one input, an emissions inventory of VOCs. Consequently, a global inventory of anthropogenic VOC emissions has been developed. The inventory includes VOC estimates for seven classes of VOCs: paraffins, olefins, aromatics (benzene, toluene, xylene), formaldehyde, other aldehydes, other aromatics, and marginally reactive compounds. These classes represent general classes of VOC compounds which possess different chemical reactivities in the atmosphere. The technical approach used to develop this inventory involved four major steps. The first step was to identify the major anthropogenic sources of VOC emissions in the United States and to group these sources into 28 general source groups. Source groups were developed to represent general categories such as "sources associated with oil and natural gas production" and more specific categories such as savanna buming. Emission factors for these source groups were then developed using different techniques and data bases. For example, emission factors for oil and natural gas production were estimated by dividing the United States' emissions from oil and gas production operations by the amount of oil and natural gas produced in the United States. Multiplication of these emission factors by production/consumption statistics for other countries yielded global VOC emission estimates for specific source groups within those countries. The final step in development of the VOC inventory was to distribute emissions into 10° by 10° grid cells using detailed maps of population and industrial activity. The results of this study show total global anthropogenic VOC emissions of

  7. Development of an organic vapor emission inventory for polyester resin/fiberglass fabrication processes in California

    SciTech Connect

    Rogozen, M.B.

    1982-01-01

    The production of reinforced plastics through the combination of polyester resin/styrene mixtures and glass fibers results in the release of significant uncontrolled organic vapor emissions. Because styrene and other compounds used as cross-linking agents in polyester resin are photochemically reactive, there is concern that their release may contribute to oxidant formation. An attempt has been made to locate and characterize as many sources of polyester resin/fiberglass process emissions in California as possible. An emission inventory based upon more realistic emission factors has been established. The technology for controlling organic vapor emissions from this industry has been reviewed. 12 references, 5 figures, 3 tables.

  8. Evaluating policy-relevant emission inventories for transportation and electricity (Invited)

    NASA Astrophysics Data System (ADS)

    Holloway, T.; Meier, P.; Bickford, E. E.

    2013-12-01

    We explore the challenges and opportunities in evaluating bottom-up emission inventories for transportation and electricity. These anthropogenic emissions respond in complex ways to technology and activity changes. Thus, it is essential that inventories capture historic emissions consistent with observations, as well as future emissions consistent with policy scenarios. For transportation, we focus on freight-related trucking emissions, represented by the Wisconsin Inventory for Freight Emissions (WIFE), developed with activity data from the U.S. Federal Highway Administration Freight Analysis Framework and emission factors from the EPA MOVES model. Because WIFE is linked to commodity flows and roadway speeds, it offers a useful data set to evaluate policy changes such as truck-to-rail modal shifts and alternative fuel choices. However, the value of the inventory in assessing these scenarios depends on its skill in calculating frieght-related emissions. Satellite data of nitrogen dioxide (NO2) from the OMI instrument aboard the NASA Aura satellite is used to evaluate truck and rail NOx emissions, especially on rural highways away from ground-based monitors. For electricity, we use the MyPower electricity dispatch model to calculate emissions and power generation in response to policy and technology changes. These include renewable portfolio standards, conservation, increased natural gas, and response to building demand. To evaluate MyPower, we compare with the Clean Air Markets database, and 2007 calculated daily afternoon emissions with satellite-derived NO2 from OMI. Drawing on the results of these studies, we discuss strategies to meet the information demands of both historically correct air quality inputs and future-relevant policy scenarios.

  9. Development of a US Carbon Dioxide Emission Inventory with High Spatial and Temporal Resolution

    NASA Astrophysics Data System (ADS)

    Frost, G. J.; Petron, G.; McKeen, S.; Capps, S.; Trainer, M.

    2006-12-01

    Power generation and transportation are responsible for about 40 percent and 33 percent, respectively, of the CO2 generated from US fossil fuel combustion. We are developing a US CO2 emission inventory of the power generation and on-road motor vehicle sectors that incorporates the high spatial and temporal resolution available in a variety of data sets. CO2 emission data with up to hourly resolution are measured by continuous emission monitors installed at most US power generation facilities. CO2 emissions from on-road motor vehicles are determined from annual Federal Highway Administration statistics on gasoline and diesel sales in every US state. These statewide data are spatially allocated to 4-km resolution using the EPA's National Emission Inventory estimates of NOx and CO emissions from on-road gasoline and diesel combustion. The inventory incorporating these highly resolved components is compared with other available bottom-up estimates of CO2 sources for the US. Comparisons are also made between this inventory and atmospheric measurements from air quality field studies during the past decade.

  10. A preliminary compilation and evaluation of a comprehensive emission inventory for polychlorinated biphenyls in China.

    PubMed

    Cui, Song; Fu, Qiang; Ma, Wan-Li; Song, Wei-Wei; Liu, Li-Yan; Li, Yi-Fan

    2015-11-15

    Emission inventories for polychlorinated biphenyls (PCBs) are crucial input data for atmospheric transport modeling and for the study of source-receptor relationships and the environmental behavior of these chemicals. Three types of primary PCB sources are considered in this study: intentionally produced PCBs (IP-PCBs), unintentionally produced PCBs (UP-PCBs), and PCB emissions from two e-waste sites (EW-PCBs). This study presents the historical emissions of all IP-, UP- and EW-PCBs into the air in China and the gridded Chinese emission inventories at a resolution of 1/6° latitude×1/4° longitude from 1950 to 2010. The UP-TPCB emissions from 1950 to 2010 were re-estimated to be 8.56t from eight emission sources comprising 96.3% of the Chinese UP-TPCB emissions. The EW-TPCB emissions from 1990 to 2010 were estimated to be 103.5 t, of which 7.1t and 12.3t were EW-PCB28 and EW-7PCB congeners (i.e., indicator-PCB28, 52, 101, 118, 138, 153, 180), respectively. The IP-PCB28 and IP-7PCB congener emissions from 1965 to 2010 were estimated to be 57.4 t and 130.1t, respectively. A significant correlation was found between congener PCB28 and 7PCBs (R(2)=0.988 and P=0.000), which suggests that PCB28 is a good marker congener for describing the emission trends of all 7PCB emission sources. The gridded emission data were compared with published measured atmospheric concentrations for 2004 and 2008, and a significant correlation was found between the modeled emissions and monitoring data. To our knowledge, this study presents the first comprehensive gridded emission inventories that include all IP-, UP-, and EW-PCBs on a national scale.

  11. A preliminary compilation and evaluation of a comprehensive emission inventory for polychlorinated biphenyls in China.

    PubMed

    Cui, Song; Fu, Qiang; Ma, Wan-Li; Song, Wei-Wei; Liu, Li-Yan; Li, Yi-Fan

    2015-11-15

    Emission inventories for polychlorinated biphenyls (PCBs) are crucial input data for atmospheric transport modeling and for the study of source-receptor relationships and the environmental behavior of these chemicals. Three types of primary PCB sources are considered in this study: intentionally produced PCBs (IP-PCBs), unintentionally produced PCBs (UP-PCBs), and PCB emissions from two e-waste sites (EW-PCBs). This study presents the historical emissions of all IP-, UP- and EW-PCBs into the air in China and the gridded Chinese emission inventories at a resolution of 1/6° latitude×1/4° longitude from 1950 to 2010. The UP-TPCB emissions from 1950 to 2010 were re-estimated to be 8.56t from eight emission sources comprising 96.3% of the Chinese UP-TPCB emissions. The EW-TPCB emissions from 1990 to 2010 were estimated to be 103.5 t, of which 7.1t and 12.3t were EW-PCB28 and EW-7PCB congeners (i.e., indicator-PCB28, 52, 101, 118, 138, 153, 180), respectively. The IP-PCB28 and IP-7PCB congener emissions from 1965 to 2010 were estimated to be 57.4 t and 130.1t, respectively. A significant correlation was found between congener PCB28 and 7PCBs (R(2)=0.988 and P=0.000), which suggests that PCB28 is a good marker congener for describing the emission trends of all 7PCB emission sources. The gridded emission data were compared with published measured atmospheric concentrations for 2004 and 2008, and a significant correlation was found between the modeled emissions and monitoring data. To our knowledge, this study presents the first comprehensive gridded emission inventories that include all IP-, UP-, and EW-PCBs on a national scale. PMID:26172591

  12. Ammonia emissions in tropical biomass burning regions: Comparison between satellite-derived emissions and bottom-up fire inventories

    NASA Astrophysics Data System (ADS)

    Whitburn, S.; Van Damme, M.; Kaiser, J. W.; van der Werf, G. R.; Turquety, S.; Hurtmans, D.; Clarisse, L.; Clerbaux, C.; Coheur, P.-F.

    2015-11-01

    Vegetation fires emit large amounts of nitrogen compounds in the atmosphere, including ammonia (NH3). These emissions are still subject to large uncertainties. In this study, we analyze time series of monthly NH3 total columns (molec cm-2) from the IASI sounder on board MetOp-A satellite and their relation with MODIS fire radiative power (MW) measurements. We derive monthly NH3 emissions estimates for four regions accounting for a major part of the total area affected by fires (two in Africa, one in central South America and one in Southeast Asia), using a simplified box model, and we compare them to the emissions from both the GFEDv3.1 and GFASv1.0 biomass burning emission inventories. In order to strengthen the analysis, we perform a similar comparison for carbon monoxide (CO), also measured by IASI and for which the emission factors used in the inventories to convert biomass burned to trace gas emissions are thought to be more reliable. In general, a good correspondence between NH3 and CO columns and the FRP is found, especially for regions in central South America with correlation coefficients of 0.82 and 0.66, respectively. The comparison with the two biomass burning emission inventories GFASv1.0 and GFEDv3.1 shows good agreements, particularly in the time of the maximum of emissions for the central South America region and in the magnitude for the region of Africa south of the equator. We find evidence of significant non-pyrogenic emissions for the regions of Africa north of the equator (for NH3) and Southeast Asia (for NH3 and CO). On a yearly basis, total emissions calculated from IASI measurements for the four regions reproduce fairly well the interannual variability from the GFEDv3.1 and GFASv1.0 emissions inventories for NH3 but show values about 1.5-2 times higher than emissions given by the two biomass burning emission inventories, even when assuming a fairly long lifetime of 36 h for that species.

  13. A spatial ammonia emission inventory for pig farming

    NASA Astrophysics Data System (ADS)

    Rebolledo, Boris; Gil, Antonia; Pallarés, Javier

    2013-01-01

    Atmospheric emissions of ammonia (NH3) from the agricultural sector have become a significant environmental and public concern as they have impacts on human health and ecosystems. This work proposes an improved methodology in order to identify administrative regions with high NH3 emissions from pig farming and calculates an ammonia density map (kg NH3-N ha-1), based on the number of pigs and available agricultural land, terrain slopes, groundwater bodies, soil permeability, zones sensitive to nitrate pollution and surface water buffer zones. The methodology has been used to construct a general tool for locating ammonia emissions from pig farming when detailed information of livestock farms is not available.

  14. Investigations for Heavy Metals and POPs Emission Inventory Improvement in Belarus

    NASA Astrophysics Data System (ADS)

    Kakareka, S.; Kukharchyk, T.

    2003-04-01

    Emission fluxes assessment acts as starting point of air pollution interpretation. The paper presents results of a 7-years activity on identification and estimation of heavy metals and POPs emission sources in Belarus, most of which are poorly inventoried. Methodology based on sources testing and emission factors has been used. The following heavy metals emission sources have been evaluated: stationary fuel combustion, ferrous industry, cement production, glass production, phosphate fertilizers production, road transport, other mobile sources and machinery, cremation, waste incineration. We can generalize that on the territory of Belarus stationary fuel combustion is the main source of emission of arsenic and nickel. Cement production is the main source of mercury, and an essential source of cadmium and lead. Electric arc furnace steel plant provides main part of zinc emissions, and significant share of cadmium and lead. In the 90s the steady reduction heavy metals emissions on the territory of Belarus occured. It especially typical for lead emissions - from in 798 tonnes in 1990 tonnes to 46 tonnes in 2000 because of prohibition of ethylated gasoline usage. As the result of POPs sources identification and estimation it was detected that main contribution into dioxin emission have non-industrial solid fuel combustion (firewood and peat), electric arc furnace and waste incineration. Firewood and peat combustion and mobile sources were revealed to make the largest contribution in PAH emissions in Belarus. Pesticides from POPs Protocol to Geneva Convention and Stockholm POPs Convention (such as DDT, lindane, hexachlorobenzene, toxaphen, endrin, dieldrine, mirex, heptachlor et. al.) are not used now in Belarus. But a large amount of them are stored in various burial sites and storage places which cause significant ecological problems due to pollutants infiltration and spills. Leakage from transformers and damaged capacitors were estimated as the main source of

  15. The Mexico greenhouse gases emissions inventory: Results and methodology contributions on agriculture and land use change

    SciTech Connect

    Ruiz-Suarez, L.G.; Gonzalez, E.; Masera, O.

    1996-12-31

    The 1990 Preliminary Greenhouse Gases Emissions Inventory was released in October 1995. It was carried out with sponsorship of the US CSSP and UNEP. It was the product of a partnership between government and academic institutions. Total emissions of CO{sub 2} are 433,721 Gg. Land use change emissions of CO{sub 2} are 111,784 Gg which accounts for 25.8% of the national total. Methane is the second largest greenhouse gas, 3,801 Gg. When its warming potential is accounted for, it is equivalent to 18% of total greenhouse gases emissions. Livestock is the source of 51.3% of these emissions. Methane emissions from cattle and CO{sub 2} emissions from land use change are strongly associated. Besides the results on emission estimates, the inventory work allowed them to use and to improve on IPCC methodologies. Serious miscalculations may result from straightforward application of Tier 1 or even and even of Tier 2 IPPC methodologies for methane emissions from cattle. The need for nation specific forest categories and for more detailed information on the dynamics of land use change was shown. An analysis of emission trends shows the possibility of associated mitigation options for methane and CO{sub 2} from these two sources. A comparative analysis for mitigation potential of methane emissions from large and small scale cattle raising is under way.

  16. Global Gridded Emission Inventories of Pentabrominated Diphenyl Ether (PeBDE)

    NASA Astrophysics Data System (ADS)

    Li, Yi-Fan; Tian, Chongguo; Yang, Meng; Jia, Hongliang; Ma, Jianmin; Li, Dacheng

    2010-05-01

    Polybrominated diphenyl ethers (PBDEs) are flame retardants widely used in many everyday products such as cars, furniture, textiles, and other electronic equipment. The commercial PBDEs have three major technical mixtures: penta-(PeBDE), octa-(OBDE) and decabromodiphenyl ethers (DeBDE). PeBDE is a mixture of several BDE congeners, such as BDE-47, -99, and -100, and has been included as a new member of persistent organic pollutants (POPs) under the 2009 Stockholm Convention. In order to produce gridded emission inventories of PeBDE on a global scale, information of production, consumption, emission, and physiochemical properties of PeBDE have been searched for published papers, government reports, and internet publications. A methodology to estimate the emissions of PeBDE has been developed and global gridded emission inventories of 2 major congener in PeBDE mixture, BDE-47 and -99, on a 1 degree by 1degree latitude/longitude resolution for 2005 have been compiled. Using these emission inventories as input data, the Canadian Model for Environmental Transport of Organochlorine Pesticides (CanMETOP) model was used to simulate the transport of these chemicals and their concentrations in air were calculated for the year of 2005. The modeled air concentration of BDE-47 and -99 were compared with the monitoring air concentrations of these two congeners in the same year obtained from renowned international/national monitoring programs, such as Global Atmospheric Passive Sampling (GAPS), the Integrated Atmospheric Deposition Network (IADN), and the Chinese POPs Soil and Air Monitoring Program (SAMP), and significant correlations between the modeled results and the monitoring data were found, indicating the high quality of the produced emission inventories of BDE-47 and -99. Keywords: Pentabrominated Diphenyl Ether (PeBDE), Emission Inventories, Global, Model

  17. Validation of the Swiss methane emission inventory by atmospheric observations and inverse modelling

    NASA Astrophysics Data System (ADS)

    Henne, S.; Brunner, D.; Oney, B.; Leuenberger, M.; Eugster, W.; Bamberger, I.; Meinhardt, F.; Steinbacher, M.; Emmenegger, L.

    2015-12-01

    Atmospheric inverse modelling has the potential to provide observation-based estimates of greenhouse gas emissions at the country scale, thereby allowing for an independent validation of national emission inventories. Here, we present a regional scale inverse modelling study to quantify the emissions of methane (CH4) from Switzerland, making use of the newly established CarboCount-CH measurement network and a high resolution Lagrangian transport model. Overall we estimate national CH4 emissions to be 196 ± 18 Gg yr-1 for the year 2013 (1σ uncertainty). This result is in close agreement with the recently revised "bottom-up" estimate of 206 ± 33 Gg yr-1 published by the Swiss Federal Office for the Environment as part of the Swiss Greenhouse Gas Inventory (SGHGI). Results from sensitivity inversions using alternative prior emissions, covariance settings, baseline treatments, two different inverse algorithms (Bayesian and extended Kalman Filter), and two different transport models confirms the robustness and independent character of our estimate. According to the latest "bottom-up" inventory the main CH4 source categories in Switzerland are agriculture (78 %), waste handling (15 %) and natural gas distribution and combustion (6 %). The spatial distribution and seasonal variability of our posterior emissions suggest an overestimation of agricultural CH4 emissions by 10 to 20 % in the most recent national inventory, which is likely due to an overestimation of emissions from manure handling. Urban areas do not appear as emission hotspots in our posterior results suggesting that leakages from natural gas disribution are only a minor source of CH4 in Switzerland. This is consistent with rather low emissions of 8.4 Gg yr-1 reported by the SGHGI but inconsistent with the much higher value of 32 Gg yr-1 implied by the EDGARv4.2 inventory for this sector. Increased CH4 emissions (up to 30 % compared to the prior) were deduced for the north-eastern parts of Switzerland. This

  18. An approach for verifying biogenic greenhouse gas emissions inventories with atmospheric CO2 concentration data

    NASA Astrophysics Data System (ADS)

    Ogle, Stephen M.; Davis, Kenneth; Lauvaux, Thomas; Schuh, Andrew; Cooley, Dan; West, Tristram O.; Heath, Linda S.; Miles, Natasha L.; Richardson, Scott; Breidt, F. Jay; Smith, James E.; McCarty, Jessica L.; Gurney, Kevin R.; Tans, Pieter; Denning, A. Scott

    2015-03-01

    Verifying national greenhouse gas (GHG) emissions inventories is a critical step to ensure that reported emissions data to the United Nations Framework Convention on Climate Change (UNFCCC) are accurate and representative of a country’s contribution to GHG concentrations in the atmosphere. Furthermore, verifying biogenic fluxes provides a check on estimated emissions associated with managing lands for carbon sequestration and other activities, which often have large uncertainties. We report here on the challenges and results associated with a case study using atmospheric measurements of CO2 concentrations and inverse modeling to verify nationally-reported biogenic CO2 emissions. The biogenic CO2 emissions inventory was compiled for the Mid-Continent region of United States based on methods and data used by the US government for reporting to the UNFCCC, along with additional sources and sinks to produce a full carbon balance. The biogenic emissions inventory produced an estimated flux of -408 ± 136 Tg CO2 for the entire study region, which was not statistically different from the biogenic flux of -478 ± 146 Tg CO2 that was estimated using the atmospheric CO2 concentration data. At sub-regional scales, the spatial density of atmospheric observations did not appear sufficient to verify emissions in general. However, a difference between the inventory and inversion results was found in one isolated area of West-central Wisconsin. This part of the region is dominated by forestlands, suggesting that further investigation may be warranted into the forest C stock or harvested wood product data from this portion of the study area. The results suggest that observations of atmospheric CO2 concentration data and inverse modeling could be used to verify biogenic emissions, and provide more confidence in biogenic GHG emissions reporting to the UNFCCC.

  19. Monte Carlo analysis of uncertainties in the Netherlands greenhouse gas emission inventory for 1990-2004

    NASA Astrophysics Data System (ADS)

    Ramírez, Andrea; de Keizer, Corry; Van der Sluijs, Jeroen P.; Olivier, Jos; Brandes, Laurens

    This paper presents an assessment of the value added of a Monte Carlo analysis of the uncertainties in the Netherlands inventory of greenhouse gases over a Tier 1 analysis. It also examines which parameters contributed the most to the total emission uncertainty and identified areas of high priority for the further improvement of the accuracy and quality of the inventory. The Monte Carlo analysis resulted in an uncertainty range in total GHG emissions of 4.1% in 2004 and 5.4% in 1990 (with LUCF) and 5.3% (in 1990) and 3.9% (in 2004) for GHG emissions without LUCF. Uncertainty in the trend was estimated at 4.5%. The values are in the same order of magnitude as those estimated in the Tier 1. The results show that accounting for correlation among parameters is important, and for the Netherlands inventory it has a larger impact on the uncertainty in the trend than on the uncertainty in the total GHG emissions. The main contributors to overall uncertainty are found to be related to N 2O emissions from agricultural soils, the N 2O implied emission factors of Nitric Acid Production, CH 4 from managed solid waste disposal on land, and the implied emission factor of CH 4 from manure management from cattle.

  20. Industrial surface coatings: Wood furniture and fixtures emission inventory development. Final report

    SciTech Connect

    Anex, R.P.; Lund, J.R.; Chang, D.P.Y.

    1998-06-01

    The purpose of this study is to update the methods for estimating emissions from the industrial coatings subcategory of wood furniture and fixtures. The wood furniture and fixture industry encompasses the manufacture of diverse products including cabinets, office furniture, store fixtures, and residential furniture. Specific objectives of this work are to: (1) estimate the amount of coating used in the industrial surface coating of wood furniture and fixtures; (2) develop emissions factors for each coating application category; (3) estimate variability of both coating use and emission factors; and (4) specify a source of information and method to revise and update the industrial coating of wood furniture and fixtures emission inventory.

  1. Emissions inventories for MSW landfills under Title V

    SciTech Connect

    Vogt, W.G.; Peyser, T.R.; Hamilton, S.M.

    1996-05-01

    In the past, many states were either not concerned with, or unaware that, municipal solid waste landfills (MSWLFs) were potential sources of regulated air pollutants. This philosophy is rapidly changing, in part due to US EPA policy documents concerning (and defining) fugitive and non-fugitive emissions from MSWLFs, the attention given to the newly released New Source Performance Standards and a recent lawsuit that gained national notoriety involving landfill air emissions and air permitting applicability issues. Most states now recognize that MSWLFs are sources of regulated air pollutants and are subject to permitting requirements (and pollutant emission fees) as other industries; i.e., state-level minor- and major-source operating permit programs, and the 1990 Clean Air Act Amendments Title V Operating Permits Program (Title V).

  2. Assessment of fire emission inventories during the South American Biomass Burning Analysis (SAMBBA) experiment

    NASA Astrophysics Data System (ADS)

    Pereira, Gabriel; Siqueira, Ricardo; Rosário, Nilton E.; Longo, Karla L.; Freitas, Saulo R.; Cardozo, Francielle S.; Kaiser, Johannes W.; Wooster, Martin J.

    2016-06-01

    Fires associated with land use and land cover changes release large amounts of aerosols and trace gases into the atmosphere. Although several inventories of biomass burning emissions cover Brazil, there are still considerable uncertainties and differences among them. While most fire emission inventories utilize the parameters of burned area, vegetation fuel load, emission factors, and other parameters to estimate the biomass burned and its associated emissions, several more recent inventories apply an alternative method based on fire radiative power (FRP) observations to estimate the amount of biomass burned and the corresponding emissions of trace gases and aerosols. The Brazilian Biomass Burning Emission Model (3BEM) and the Fire Inventory from NCAR (FINN) are examples of the first, while the Brazilian Biomass Burning Emission Model with FRP assimilation (3BEM_FRP) and the Global Fire Assimilation System (GFAS) are examples of the latter. These four biomass burning emission inventories were used during the South American Biomass Burning Analysis (SAMBBA) field campaign. This paper analyzes and inter-compared them, focusing on eight regions in Brazil and the time period of 1 September-31 October 2012. Aerosol optical thickness (AOT550 nm) derived from measurements made by the Moderate Resolution Imaging Spectroradiometer (MODIS) operating on board the Terra and Aqua satellites is also applied to assess the inventories' consistency. The daily area-averaged pyrogenic carbon monoxide (CO) emission estimates exhibit significant linear correlations (r, p > 0.05 level, Student t test) between 3BEM and FINN and between 3BEM_ FRP and GFAS, with values of 0.86 and 0.85, respectively. These results indicate that emission estimates in this region derived via similar methods tend to agree with one other. However, they differ more from the estimates derived via the alternative approach. The evaluation of MODIS AOT550 nm indicates that model simulation driven by 3BEM and FINN

  3. 40 CFR 60.25 - Emission inventories, source surveillance, reports.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... electronic documents shall comply with the requirements of 40 CFR part 3—(Electronic reporting). (2) Periodic... shall be correlated with applicable emission standards. As used in this subpart, “correlated” means... information obtained by the State under paragraph (b) of this section shall be correlated with...

  4. 40 CFR 60.25 - Emission inventories, source surveillance, reports.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... electronic documents shall comply with the requirements of 40 CFR part 3—(Electronic reporting). (2) Periodic... shall be correlated with applicable emission standards. As used in this subpart, “correlated” means... information obtained by the State under paragraph (b) of this section shall be correlated with...

  5. Inventory of emissions from boating sources in California. Final report

    SciTech Connect

    Parker, N.R.; Dale, D.A.; Taback, H.J.

    1980-07-01

    This final report presents the distribution of boating fuel consumption and associated emissions in California, by waterway, county, and air basin. Two classes of small boats are considered. Pleasure boats are those craft owned by individuals and companies; used for cruising, water skiing, sport fishing and other recreational activities; and are powered by both gasoline and diesel engines. Commercial boats are those used for public transportation, commercial fishing, and other work functions such as tugboats, U.S. Coast Guard cutters, personnel and cargo hauling boats, etc. Commercial boats are powered primarily by diesel engines but there are a few gasoline powered craft. For the base year 1977, the statewide consumption of gasoline was 96,000,000 gallons and the consumption of diesel fuel was 36,000,000 gallons. The pollutant emission totals for 1977 were: SOx, 770 tons; CO, 105,000 tons; HC 26,000 tons; NOx, 3,600 tons and particulate matter 530 tons. Seasonal average daily emissions for winter and summer are shown in the report. The emission factors used in this study were obtained from EPA publication AP-42.

  6. 40 CFR Appendix D to Part 60 - Required Emission Inventory Information

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... D Appendix D to Part 60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES (CONTINUED) Pt. 60, App. D Appendix D to Part 60—Required Emission Inventory Information (a) Completed NEDS point source form(s)...

  7. “Summary of the Emission Inventories compiled for the AQMEII phase 2 Simulations”

    EPA Science Inventory

    We present a summary of the emission inventories from the US, Canada, and Mexico developed for the second phase of the Air Quality Model Evaluation International Initiative (AQMEII). Activities in this second phase are focused on the application and evaluation of coupled meteorol...

  8. 40 CFR Appendix D to Part 60 - Required Emission Inventory Information

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... D Appendix D to Part 60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES (CONTINUED) Pt. 60, App. D Appendix D to Part 60—Required Emission Inventory Information (a) Completed NEDS point source form(s)...

  9. 40 CFR 51.1008 - Emission inventory requirements for the PM2.5 NAAQS.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... PM2.5 NAAQS. 51.1008 Section 51.1008 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Provisions for Implementation of PM2.5 National Ambient Air Quality Standards § 51.1008 Emission inventory... 172(c)(3) of the Act for nonattainment areas, the State shall, no later than three years...

  10. 40 CFR 51.915 - What emissions inventory requirements apply under the 8-hour NAAQS?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... emissions inventories for these areas, the ozone-relevant data element requirements under 40 CFR part 51... nonattainment area subject only to title I, part D, subpart 1 of the Act in accordance with § 51.902(b), the... apply under the 8-hour NAAQS? 51.915 Section 51.915 Protection of Environment ENVIRONMENTAL...

  11. 40 CFR 51.1008 - Emission inventory requirements for the PM2.5 NAAQS.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 2 2011-07-01 2011-07-01 false Emission inventory requirements for the PM2.5 NAAQS. 51.1008 Section 51.1008 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS REQUIREMENTS FOR PREPARATION, ADOPTION, AND SUBMITTAL OF IMPLEMENTATION PLANS Provisions for Implementation of PM2.5...

  12. Inventory and forecasting of maritime emissions in the Belgian sea territory, an activity-based emission model

    NASA Astrophysics Data System (ADS)

    Schrooten, Liesbeth; De Vlieger, Ina; Int Panis, Luc; Styns, Karel; Torfs, Rudi

    Air quality policy has focussed on land-based emissions for decades. In recent years, it has become increasingly clear that emissions from sea-going vessels can no longer be ignored. There is a growing need for detailed emission inventories to evaluate the impact of this transport mode on air quality and health. In this paper we present MOPSEA, an activity-based emission model to determine emissions from sea-going vessels. The model considers shipping activities of sea-going vessels on Belgian territory, combined with individual vessel characteristics. We apply this model to study the effects of recent international efforts to reduce emissions from sea-going vessels in Belgian territorial waters for the current fleet and for two scenarios up to 2010. The emission model for Belgium, based on different vessel operating areas, reveals that most maritime emissions from the main engines will increase. CO 2 emissions will increase by 2-9% over the 2004-2010 period due to an increase in shipping activity. NO X emissions are projected to rise between 1% and 8% because the increase in activity offsets the reductions from the international maritime organisation (IMO) and European regulations. In contrast, SO 2 emissions will decrease by at least 50% in 6 years time. The switch of auxiliaries from heavy fuel oil to diesel oil at berth results in a large emission reduction (33%) for PM and small reductions for CO 2, NO X, CO and HC (4-5%). The choice between a bottom-up versus top-down approach can have important implications for the allocation of maritime emissions. The MOPSEA bottom-up model allocates only 0.7 Mton CO 2 to Belgium, compared to 24.2 Mton CO 2 based on bunker fuel inventories.

  13. High-resolution Inventory of Rural Residential Emissions in China in 2010

    NASA Astrophysics Data System (ADS)

    Peng, L.; Zhang, Q.; Yao, Z.; Kang, S.; Du, Z.; He, K.

    2015-12-01

    We developed a bottom-up emission inventory for Chinese rural residential sector. Emissions are estimated with an empirical model which established the relationship between solid fuel-use pattern and meteorological, geographic, and income factors for rural residential households in China using the ~17,000 samples collected by questionnaire survey in 2010. At the same time, an improved emission factors database is also compiled in this work by collecting most recent local measurements. Driven by the increase of income, household residents prefer to choose fossil fuel than biofuel. The estimated aggregated consumptions of coal and crop residues for rural residential are higher by 58% and lower by 47% compare to the official energy statistics, respectively. Emissions from China's rural residential sector in 2010 are estimated to be 2.2 Tg SO2, 0.4 Tg NOx, 40.0 Tg CO, 2.1 Tg NMVOC, 3.1 Tg PM2.5, 0.5 Tg BC and 1.2 Tg OC respectively. The developed inventory improves the fuel consumption data availability for rural residential and represent the differences in fuel use patterns among provinces. This work is important to understand the characteristics of rural residential fuel activities and emissions by providing the valuable first-hand solid fuel-use pattern data for rural residential in China and will be helpful to improve the accuracy of bottom-up emission inventory over China.

  14. EDGAR_v4.3: a global air pollutant emission inventory from 1970 to 2010

    NASA Astrophysics Data System (ADS)

    Crippa, M.; Janssens-Maenhout, G.; Guizzardi, D.; Muntean, M.; Schaaf, E.; Olivier, J. G.; Denier Van Der Gon, H.; Dentener, F. J.

    2014-12-01

    The Emission Database for Global Atmospheric Research (EDGAR) provides consistent gridded anthropogenic emissions of greenhouse gases, precursor gases and aerosols from 1970 to 2010. Since EDGAR's first release in 1996 (EDGARv2), a continuous improvement and upgrade of the emission data resulted in a sequence of releases. Here we present EDGAR_v4.3 (2014), which features new information on emission factors and an extension to 2009-2010 data compared to EDGAR_v4.2. EDGAR_v4.2 was used in many inverse modeling studies in EU, US, Africa and Asia yielding regional refinement of emission factors and adjustments of technology penetration (e.g. coal mining, power plants) and proxy data for geospatial distribution (e.g. passenger car transport). We focus on SO2, NOx, CO, NMVOC, NH3, PM10, PM2.5, BC and OC emissions for the most recent year (2010), and compare them to two global inventories used in global modeling, as well as the regional inventories included in them. HTAP_v2 is a harmonized, global, gridded, emission database for 2010, developed for global and regional model tasks within the Task Force Hemispheric Transport Air pollution. It uses officially reported, gridded national inventories, complemented with science based data, partly gap-filled with EDGAR. However, since HTAP_v2 is relying on (sub-)national statistics, it may not be as consistent across countries and regions, as a globally calculated inventory using international statistics and global geospatial distributions. Another available global inventory is MACCity, covering the years 1980-2010. We compare EDGAR_v4.3 with HTAP_v2 and MACCity in order to explain differences from national estimates and address emission inventory uncertainties, indicating weaknesses and strengths of these databases. We present the geospatial distribution of emissions at 0.1x0.1 degree resolution, comparing the contribution of developing and emerging countries with industrialized regions, both as absolute and per capita data.

  15. A high-resolution emission inventory of primary pollutants for the Huabei region, China

    NASA Astrophysics Data System (ADS)

    Zhao, B.; Wang, P.; Ma, J. Z.; Zhu, S.; Pozzer, A.; Li, W.

    2012-01-01

    Huabei, located between 32° N and 42° N, is part of eastern China and includes administratively the Beijing and Tianjin Municipalities, Hebei and Shanxi Provinces, and Inner-Mongolia Autonomous Region. Over the past decades, the region has experienced dramatic changes in air quality and climate, and has become a major focus of environmental research in China. Here we present a new inventory of air pollutant emissions in Huabei for the year 2003 developed as part of the project Influence of Pollution on Aerosols and Cloud Microphysics in North China (IPAC-NC). Our estimates are based on data from the statistical yearbooks of the state, provinces and local districts, including major sectors and activities of power generation, industrial energy consumption, industrial processing, civil energy consumption, crop straw burning, oil and solvent evaporation, manure, and motor vehicles. The emission factors are selected from a variety of literature and those from local measurements in China are used whenever available. The estimated total emissions in the Huabei administrative region in 2003 are 4.73 Tg SO2, 2.72 Tg NOx (in equivalent NO2), 1.77 Tg VOC, 24.14 Tg CO, 2.03 Tg NH3, 4.57 Tg PM10, 2.42 Tg PM2.5, 0.21 Tg EC, and 0.46 Tg OC. For model convenience, we consider a larger Huabei region with Shandong, Henan and Liaoning Provinces included in our inventory. The estimated total emissions in the larger Huabei region in 2003 are: 9.55 Tg SO2, 5.27 Tg NOx (in equivalent NO2), 3.82 Tg VOC, 46.59 Tg CO, 5.36 Tg NH3, 10.74 Tg PM10, 5.62 Tg PM2.5, 0.41 Tg EC, and 0.99 Tg OC. The estimated emission rates are projected into grid cells at a horizontal resolution of 0.1° latitude by 0.1° longitude. Our gridded emission inventory consists of area sources, which are classified into industrial, civil, traffic, and straw burning sectors, and large industrial point sources, which include 345 sets of power plants, iron and steel plants, cement plants, and chemical plants. The

  16. Gridded atmospheric emission inventory of 2,3,7,8-TCDD in China

    NASA Astrophysics Data System (ADS)

    Huang, Tao; Tian, Chongguo; Zhang, Kai; Gao, Hong; Li, Yi-Fan; Ma, Jianmin

    2015-05-01

    Establishment of the dioxins emission inventory has been considered as a crucial step toward risk assessment and elimination of dioxins contaminations. Based on a total dioxin emission inventory in China from different emission categories in 2004, this study created a gridded emission inventory of 2,3,7,8-TCDD, the most toxic congener in dioxins, in China in 2009 with a 1/4° longitude by 1/4° latitude resolution. It was estimated that annually total 371 ± 53 g (average ± standard deviation) of 2,3,7,8-TCDD was released into the atmosphere in 2009 over China, increasing approximately by 37% compared with its emission in 2004. Differing from most developed countries where municipal waste incinerations were regarded as a major atmospheric emission source, in China ferrous and non-ferrous metal production made the largest contribution to 2,3,7,8-TCDD air emission (138 ± 16 g), followed by waste incineration (109 ± 12 g), power and heating generation (62 ± 9 g), and production of mineral products (47 ± 8 g). The rest of sources contributed approximately 3% to the total 2,3,7,8-TCDD emission in 2009. Iron and steel industries are mainly located in Beijing-Tianjin-Hebei (BTH) and Yangtze River Delta (YRD) regions, whereas waste incinerators are mainly located in Pearl River Delta (PRD) region. Higher 2,3,7,8-TCDD emissions were found in these three regions. While the BTH, YRD, and PRD accounted for only about 4% of total land area of China, they contributed approximately 14%, 15%, and 5% to the total 2,3,7,8-TCDD emission in 2009 in China, respectively.

  17. Energy-Dominated Local Carbon Emissions in Beijing 2007: Inventory and Input-Output Analysis

    PubMed Central

    Guo, Shan; Liu, J. B.; Shao, Ling; Li, J. S.; An, Y. R.

    2012-01-01

    For greenhouse gas (GHG) emissions by Beijing economy 2007, a concrete emission inventory covering carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) is presented and associated with an input-output analysis to reveal the local GHG embodiment in final demand and trade without regard to imported emissions. The total direct GHG emissions amount to 1.06E + 08 t CO2-eq, of which energy-related CO2 emissions comprise 90.49%, non-energy-related CO2 emissions 6.35%, CH4 emissions 2.33%, and N2O emissions 0.83%, respectively. In terms of energy-related CO2 emissions, the largest source is coal with a percentage of 53.08%, followed by coke with 10.75% and kerosene with 8.44%. Sector 26 (Construction Industry) holds the top local emissions embodied in final demand of 1.86E + 07 t CO2-eq due to its considerable capital, followed by energy-intensive Sectors 27 (Transport and Storage) and 14 (Smelting and Pressing of Ferrous and Nonferrous Metals). The GHG emissions embodied in Beijing's exports are 4.90E + 07 t CO2-eq, accounting for 46.01% of the total emissions embodied in final demand. The sound scientific database totally based on local emissions is an important basis to make effective environment and energy policies for local decision makers. PMID:23193385

  18. HFC-134a Emissions in China: An Inventory for 1995-2030

    NASA Astrophysics Data System (ADS)

    Su, Shenshen; Fang, Xuekun; Wu, Jing; Li, Li; Hu, Jianxin; Han, Jiarui

    2014-05-01

    HFC-134a is the most important substitute of CFC-12 used in the mobile air-conditioner in China since 1995. The bottom-up method was used to estimate HFC-134a emissions in China, from 1995 to 2030, basing on updated automobile industry data and latest emission characters. From 1995, total HFC-134a emission has kept a high growth rate of nearly 60% per year, and reached 16,414.3 Mg (11,959.4-20,834.5 Mg) in 2010, which was equivalent to 23.5 Mt CO2-eq emissions. Furthermore, the emissions in China accounted for nearly half of total emissions of Non-AnnexI countries in 2008. As for provincial emissions in 2010, provinces with emission greater than 1,000 Mg are Guangdong, Shandong, Jiangsu and Beijing. Quantitative relationship between provincial HFC-134a emissions and GRP of the Tertiary Industry was used to estimate HFC-134a emissions at county level, and Hangzhou municipal district held the maximum emission intensity (4,605 Mg/10,000 km2). For HFC-134a, emissions calculated from the observations within 46 cities through Euler box model are in good agreement with the corresponding emissions estimated from the bottom-up method, verifying that the emission inventory at county level adequately describes the emission spatial pattern. For the future emissions of HFC-134a, projected emissions will reach 89,370.4 Mg (65,959.7- 114,068.2 Mg) in 2030 under the Business-as-usual (BAU) Scenario, but under the Alternative Scenario, a emission reduction potential of 88.6% of the projected BAU emissions would be obtained.

  19. Emissions Inventory Report Summary for Los Alamos National Laboratory for Calendar Year 2006

    SciTech Connect

    Ecology and Air Quality Group

    2007-09-28

    Los Alamos National Laboratory (LANL) is subject to annual emissions reporting requirements for regulated air pollutants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), Notice of Intent and Emissions Inventory Requirements. The applicability of the requirements is based on the Laboratory's potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. Additionally, on April 30, 2004, LANL was issued a Title V Operating Permit from the New Mexico Environment Department, Air Quality Bureau, under 20.2.70 NMAC. Modification Number 1 to this Title V Operating Permit was issued on June 15, 2006 (Permit No P-100M1) and includes emission limits and operating limits for all regulated sources of air pollution at LANL. The Title V Operating Permit also requires semi-annual emissions reporting for all sources included in the permit. This report summarizes both the annual emissions inventory reporting and the semi-annual emissions reporting for LANL for calendar year 2006. LANL's 2006 emissions are well below the emission limits in the Title V Operating Permit.

  20. Emissions Inventory Report Summary for Los Alamos National Laboratory for Calendar Year 2004

    SciTech Connect

    M. Stockton

    2005-10-01

    Los Alamos National Laboratory (LANL) is subject to annual emissions reporting requirements for regulated air pollutants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), ''Notice of Intent and Emissions Inventory Requirements''. The applicability of the requirements is based on the Laboratory's potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. Additionally, on April 30, 2004, LANL was issued a Title V Operating Permit from the New Mexico Environment Department, Air Quality Bureau, under 20.2.70 NMAC. This Title V Operating Permit (Permit No. P-100) includes emission limits and operating limits for all regulated sources of air pollution at LANL. The Title V Operating Permit also requires semi-annual emissions reporting for all sources included in the permit. This report summarizes both the annual emissions inventory reporting and the semi-annual emissions reporting for LANL for calendar year 2004. LANL's 2004 emissions are well below the emission limits in the Title V Operating Permit.

  1. Inventory of PCBs in Chicago and Opportunities for Reduction in Airborne Emissions and Human Exposure.

    PubMed

    Shanahan, Caitlin E; Spak, Scott N; Martinez, Andres; Hornbuckle, Keri C

    2015-12-01

    Urban areas are important regional sources of airborne polychlorinated biphenyls (PCBs) and population-scale airborne exposure, yet a comprehensive bottom-up source inventory of PCB emissions has never been quantified at urban scales in the United States. Here we report a comprehensive parcel level inventory of PCB stocks and emissions for Chicago, Illinois, developed with a transferable method from publicly available data. Chicago's legacy stocks hold 276 ± 147 tonnes ∑PCBs, with 0.2 tonnes added annually. Transformers and building sealants represent the largest legacy categories at 250 and 20 tonnes, respectively. From these stocks, annual emissions rates of 203 kg for ∑PCBs and 3 kg for PCB 11 explain observed concentrations in Chicago air. Sewage sludge drying contributes 25% to emissions, soils 31%, and transformers 21%. Known contaminated sites account for <1% of stocks and 17% of emissions to air. Paint is responsible for 0.00001% of stocks but up to 7% of ∑PCBs emissions. Stocks and emissions are highly concentrated and not correlated with population density or demographics at the neighborhood scale. Results suggest that strategies to further reduce exposure and ecosystem deposition must focus on the largest emissions sources rather than the most contaminated sites or the largest closed source legacy stocks.

  2. Emissions Inventory Report Summary for Los Alamos National Laboratory for Calendar Year 2009

    SciTech Connect

    Environmental Stewardship Group

    2010-10-01

    Los Alamos National Laboratory (LANL) is subject to annual emissions reporting requirements for regulated air pollutants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), Notice of Intent and Emissions Inventory Requirements. The applicability of the requirements is based on the Laboratory's potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. Additionally, on April 30, 2004, LANL was issued a Title V Operating Permit from the New Mexico Environment Department/Air Quality Bureau, under 20.2.70 NMAC. This permit was modified and reissued on July 16, 2007. This Title V Operating Permit (Permit No. P-100M2) includes emission limits and operating limits for all regulated sources of air pollution at LANL. The Title V Operating Permit also requires semiannual emissions reporting for all sources included in the permit. This report summarizes both the annual emissions inventory reporting and the semiannual emissions reporting for LANL for calendar year 2009. LANL's 2009 emissions are well below the emission limits in the Title V Operating Permit.

  3. Emissions inventory report summary for Los Alamos National Laboratory for calendar year 2008

    SciTech Connect

    Ecology and Air Quality Group

    2009-10-01

    Los Alamos National Laboratory (LANL) is subject to annual emissions reporting requirements for regulated air pollutants under Title 20 of the New Mexico Administrative Code, Chapter 2, Part 73 (20.2.73 NMAC), Notice of Intent and Emissions Inventory Requirements. The applicability of the requirements is based on the Laboratory’s potential to emit 100 tons per year of suspended particulate matter, nitrogen oxides, carbon monoxide, sulfur oxides, or volatile organic compounds. Additionally, on April 30, 2004, LANL was issued a Title V Operating Permit from the New Mexico Environment Department/Air Quality Bureau, under 20.2.70 NMAC. This permit was modified and reissued on July 16, 2007. This Title V Operating Permit (Permit No. P-100M2) includes emission limits and operating limits for all regulated sources of air pollution at LANL. The Title V Operating Permit also requires semiannual emissions reporting for all sources included in the permit. This report summarizes both the annual emissions inventory reporting and the semiannual emissions reporting for LANL for calendar year 2008. LANL’s 2008 emissions are well below the emission limits in the Title V Operating Permit.

  4. Emissions inventory and scenario analyses of air pollutants in Guangdong Province, China

    NASA Astrophysics Data System (ADS)

    Chen, Hui; Meng, Jing

    2016-03-01

    Air pollution, causing significantly adverse health impacts and severe environmental problems, has raised great concerns in China in the past few decades. Guangdong Province faces major challenges to address the regional air pollution problem due to the lack of an emissions inventory. To fill this gap, an emissions inventory of primary fine particles (PM2.5) is compiled for the year 2012, and the key precursors (sulfur dioxide, nitrogen oxides) are identified. Furthermore, policy packages are simulated during the period of 2012-2030 to investigate the potential mitigation effect. The results show that in 2012, SO2, NO x , and PM2.5 emissions in Guangdong Province were as high as (951.7, 1363.6, and 294.9) kt, respectively. Industrial production processes are the largest source of SO2 and PM2.5 emissions, and transport is the top contributor of NO x emissions. Both the baseline scenario and policy scenario are constructed based on projected energy growth and policy designs. Under the baseline scenario, SO2, NO x , and PM2.5 emissions will almost double in 2030 without proper emissions control policies. The suggested policies are categorized into end-of-pipe control in power plants (ECP), end-of-pipe control in industrial processes (ECI), fuel improvement (FI), energy efficiency improvement (EEI), substitution-pattern development (SPD), and energy saving options (ESO). With the implementation of all these policies, SO2, NO x , and PM2.5 emissions are projected to drop to (303.1, 585.4, and 102.4) kt, respectively, in 2030. This inventory and simulated results will provide deeper insights for policy makers to understand the present situation and the evolution of key emissions in Guangdong Province.

  5. Emission inventories and modeling requirements for the development of air quality plans. Application to Madrid (Spain).

    PubMed

    Borge, Rafael; Lumbreras, Julio; Pérez, Javier; de la Paz, David; Vedrenne, Michel; de Andrés, Juan Manuel; Rodríguez, Ma Encarnación

    2014-01-01

    Modeling is an essential tool for the development of atmospheric emission abatement measures and air quality plans. Most often these plans are related to urban environments with high emission density and population exposure. However, air quality modeling in urban areas is a rather challenging task. As environmental standards become more stringent (e.g. European Directive 2008/50/EC), more reliable and sophisticated modeling tools are needed to simulate measures and plans that may effectively tackle air quality exceedances, common in large urban areas across Europe, particularly for NO₂. This also implies that emission inventories must satisfy a number of conditions such as consistency across the spatial scales involved in the analysis, consistency with the emission inventories used for regulatory purposes and versatility to match the requirements of different air quality and emission projection models. This study reports the modeling activities carried out in Madrid (Spain) highlighting the atmospheric emission inventory development and preparation as an illustrative example of the combination of models and data needed to develop a consistent air quality plan at urban level. These included a series of source apportionment studies to define contributions from the international, national, regional and local sources in order to understand to what extent local authorities can enforce meaningful abatement measures. Moreover, source apportionment studies were conducted in order to define contributions from different sectors and to understand the maximum feasible air quality improvement that can be achieved by reducing emissions from those sectors, thus targeting emission reduction policies to the most relevant activities. Finally, an emission scenario reflecting the effect of such policies was developed and the associated air quality was modeled.

  6. High resolution inventory of GHG emissions of the road transport sector in Argentina

    NASA Astrophysics Data System (ADS)

    Puliafito, Salvador Enrique; Allende, David; Pinto, Sebastián; Castesana, Paula

    2015-01-01

    Air quality models require the use of extensive background information, such as land use and topography maps, meteorological data and emission inventories of pollutant sources. This challenge increases when considering the vehicular sources. The available international databases have uneven resolution for all countries including some areas with low spatial resolution associated with large districts (several hundred km). A simple procedure is proposed in order to develop an inventory of emissions with high resolution (9 km) for the transport sector based on a geographic information system using readily available information applied to Argentina. The basic variable used is the vehicle activity (vehicle - km transported) estimated from fuel consumption and fuel efficiency. This information is distributed to a spatial grid according to a road hierarchy and segment length assigned to each street within the cell. Information on fuel is obtained from district consumption, but weighted using the DMSP-OLS satellite "Earth at night" image. The uncertainty of vehicle estimation and emission calculations was tested using sensitivity Montecarlo analysis. The resulting inventory is calibrated using annual average daily traffic counts in around 850 measuring points all over the country leading to an uncertainty of 20%. Uncertainties in the emissions calculation at pixel level can be estimated to be less than 12%. Comparison with international databases showed a better spatial distribution of greenhouse gases (GHG) emissions in the transport sector, but similar total national values.

  7. Inventory of Carbon Dioxide (CO2) Emissions at Pacific Northwest National Laboratory

    SciTech Connect

    Judd, Kathleen S.; Kora, Angela R.; Shankle, Steve A.; Fowler, Kimberly M.

    2009-06-29

    The Carbon Management Strategic Initiative (CMSI) is a lab-wide initiative to position the Pacific Northwest National Laboratory (PNNL) as a leader in science, technology and policy analysis required to understand, mitigate and adapt to global climate change as a nation. As part of an effort to walk the talk in the field of carbon management, PNNL conducted its first carbon dioxide (CO2) emissions inventory for the 2007 calendar year. The goal of this preliminary inventory is to provide PNNL staff and management with a sense for the relative impact different activities at PNNL have on the lab’s total carbon footprint.

  8. Validation of the Swiss methane emission inventory by atmospheric observations and inverse modelling

    NASA Astrophysics Data System (ADS)

    Henne, Stephan; Brunner, Dominik; Oney, Brian; Leuenberger, Markus; Eugster, Werner; Bamberger, Ines; Meinhardt, Frank; Steinbacher, Martin; Emmenegger, Lukas

    2016-03-01

    Atmospheric inverse modelling has the potential to provide observation-based estimates of greenhouse gas emissions at the country scale, thereby allowing for an independent validation of national emission inventories. Here, we present a regional-scale inverse modelling study to quantify the emissions of methane (CH4) from Switzerland, making use of the newly established CarboCount-CH measurement network and a high-resolution Lagrangian transport model. In our reference inversion, prior emissions were taken from the "bottom-up" Swiss Greenhouse Gas Inventory (SGHGI) as published by the Swiss Federal Office for the Environment in 2014 for the year 2012. Overall we estimate national CH4 emissions to be 196 ± 18 Gg yr-1 for the year 2013 (1σ uncertainty). This result is in close agreement with the recently revised SGHGI estimate of 206 ± 33 Gg yr-1 as reported in 2015 for the year 2012. Results from sensitivity inversions using alternative prior emissions, uncertainty covariance settings, large-scale background mole fractions, two different inverse algorithms (Bayesian and extended Kalman filter), and two different transport models confirm the robustness and independent character of our estimate. According to the latest SGHGI estimate the main CH4 source categories in Switzerland are agriculture (78 %), waste handling (15 %) and natural gas distribution and combustion (6 %). The spatial distribution and seasonal variability of our posterior emissions suggest an overestimation of agricultural CH4 emissions by 10 to 20 % in the most recent SGHGI, which is likely due to an overestimation of emissions from manure handling. Urban areas do not appear as emission hotspots in our posterior results, suggesting that leakages from natural gas distribution are only a minor source of CH4 in Switzerland. This is consistent with rather low emissions of 8.4 Gg yr-1 reported by the SGHGI but inconsistent with the much higher value of 32 Gg yr-1 implied by the EDGARv4.2 inventory for

  9. Demonstration of a Mobile Flux Laboratory for the Atmospheric Measurement of Emissions (FLAME) to Assess Emission Inventories

    NASA Astrophysics Data System (ADS)

    Moore, T. O.; Doughty, D. C.; Marr, L. C.

    2008-12-01

    As a critical input to climate and air quality models, emission inventories enable the advancement of atmospheric science and the development of effective policies to improve environmental quality. Independent verification of emissions is needed to ensure their accuracy and to identify uncertainties in them. In response to the need for new approaches to quantifying emissions, we have designed a mobile Flux Lab for the Atmospheric Measurement of Emissions (FLAME) that uses eddy covariance for the direct measurement of anthropogenic emissions at the neighborhood scale. To demonstrate the FLAME's capabilities, we have deployed it in both urban and rural settings in ozone nonattainment areas of the southeastern US. Experiments focused on carbon dioxide (CO2), nitrogen oxides (NOx), and fine particulate matter (PM2.5). Fluxes measured at three sites in a small Appalachian town dominated by coal transport were mainly positive. Compared to the state's official inventory, the measured CO2 fluxes were 1.25-50 times higher, and PM2.5 fluxes were 5-60 times higher. The FLAME can also be used to measure emission factors from specific sources. Spikes in CO2 and NOx concentrations were correlated with the passage of trains and barges through the FLAME's footprint. Calculated barge emission factors ranged from 49 to 76 kg NOx per tonne of fuel and agreed well with previously published values. In a field campaign during July 2008, we measured fluxes at 16 sites across a 12 km square in Norfolk, Virginia. The results will show the typical magnitude of greenhouse gas and criteria pollutant fluxes, their temporal and spatial variability, and relationships among different pollutants. We also compare the measurements against a 12 km gridded emission inventory developed for air quality modeling of the southeastern US. This research demonstrates that a mobile eddy covariance system can be used successfully to measure fluxes of multiple pollutants in a variety of settings. This

  10. Hydrofluorocarbon (HFC) Emissions in China: An Inventory for 2005-2013 and Projections to 2050.

    PubMed

    Fang, Xuekun; Velders, Guus J M; Ravishankara, A R; Molina, Mario J; Hu, Jianxin; Prinn, Ronald G

    2016-02-16

    Many hydrofluorocarbons (HFCs) that are widely used as substitutes for ozone-depleting substances (now regulated under the Montreal Protocol) are very potent greenhouse gases (GHGs). China's past and future HFC emissions are of great interest because China has emerged as a major producer and consumer of HFCs. Here, we present for the first time a comprehensive inventory estimate of China's HFC emissions during 2005-2013. Results show a rapid increase in HFC production, consumption, and emissions in China during the period and that the emissions of HFC with a relatively high global warming potential (GWP) grew faster than those with a relatively low GWP. The proportions of China's historical HFC CO2-equivalent emissions to China's CO2 emissions or global HFC CO2-equivalent emissions increased rapidly during 2005-2013. Using the "business-as-usual" (BAU) scenario, in which HFCs are used to replace a significant fraction of hydrochlorofluorocarbons (HCFCs) in China (to date, there are no regulations on HFC uses in China), emissions of HFCs are projected to be significant components of China's and global future GHG emissions. However, potentials do exist for minimizing China's HFC emissions (for example, if regulations on HFC uses are established in China). Our findings on China's historical and projected HFC emission trajectories could also apply to other developing countries, with important implications for mitigating global GHG emissions.

  11. Hydrofluorocarbon (HFC) Emissions in China: An Inventory for 2005-2013 and Projections to 2050.

    PubMed

    Fang, Xuekun; Velders, Guus J M; Ravishankara, A R; Molina, Mario J; Hu, Jianxin; Prinn, Ronald G

    2016-02-16

    Many hydrofluorocarbons (HFCs) that are widely used as substitutes for ozone-depleting substances (now regulated under the Montreal Protocol) are very potent greenhouse gases (GHGs). China's past and future HFC emissions are of great interest because China has emerged as a major producer and consumer of HFCs. Here, we present for the first time a comprehensive inventory estimate of China's HFC emissions during 2005-2013. Results show a rapid increase in HFC production, consumption, and emissions in China during the period and that the emissions of HFC with a relatively high global warming potential (GWP) grew faster than those with a relatively low GWP. The proportions of China's historical HFC CO2-equivalent emissions to China's CO2 emissions or global HFC CO2-equivalent emissions increased rapidly during 2005-2013. Using the "business-as-usual" (BAU) scenario, in which HFCs are used to replace a significant fraction of hydrochlorofluorocarbons (HCFCs) in China (to date, there are no regulations on HFC uses in China), emissions of HFCs are projected to be significant components of China's and global future GHG emissions. However, potentials do exist for minimizing China's HFC emissions (for example, if regulations on HFC uses are established in China). Our findings on China's historical and projected HFC emission trajectories could also apply to other developing countries, with important implications for mitigating global GHG emissions. PMID:26731627

  12. A high-resolution emission inventory of primary pollutants for the Huabei region, China

    NASA Astrophysics Data System (ADS)

    Zhao, B.; Wang, P.; Ma, J. Z.; Zhu, S.; Pozzer, A.; Li, W.

    2011-07-01

    Huabei is a part of eastern China located between 32° N and 42° N latitude. Administratively it is a region including Beijing and Tianjin Municipalities, Hebei and Shanxi Provinces, and Inner-Mongolia Autonomous Region. Over the past decades, the region has experienced dramatic changes in air quality and climate, and has become a major focus of environmental research in China. Here we present a new inventory of air pollutant emissions in Huabei for the year 2003 developed as part of the project Influence of Pollution on Aerosols and Cloud Microphysics in North China (IPAC-NC). Our estimates are based on the data from the statistical yearbooks of state and provinces as well as local districts including major sectors and activities of power generation, industrial energy consumption, industrial processing, civil energy consumption, crop straw burning, oil and solvent evaporation, manure, and motor vehicles. The emission factors are selected from a variety of literature and those from local measurements in China are used whenever available. The estimated total emissions in the Huabei administrative region in 2003 are 4.73 Tg SO2, 2.72 Tg NOx (in equivalent NO2), 1.77 Tg VOC, 24.14 Tg CO, 2.03 Tg NH3, 4.57 Tg PM10, 2.42 Tg PM2.5, 0.21 Tg EC, and 0.46 Tg OC. For model convenience, we consider a larger Huabei region with Shandong, Henan and Liaoning Provinces included in our inventory. The estimated total emissions in the larger Huabei region in 2003 are: 9.55 Tg SO2, 5.27 Tg NOx (in equivalent NO2), 3.82 Tg VOC, 46.59 Tg CO, 5.36 Tg NH3, 10.74 Tg PM10, 5.62 Tg PM2.5, 0.41 Tg EC, and 0.99 Tg OC. The estimated emission rates are projected into grid cells at a horizontal resolution of 0.1° latitude by 0.1° longitude. Our gridded emission inventory consists of area sources, which are classified into industrial, civil, traffic, and straw burning sectors, and large industrial point sources, which include 345 sets of power plants, iron and steel plants, cement plants, and

  13. Emission inventory of anthropogenic air pollutants and VOC species in the Yangtze River Delta region, China

    NASA Astrophysics Data System (ADS)

    Huang, C.; Chen, C. H.; Li, L.; Cheng, Z.; Wang, H. L.; Huang, H. Y.; Streets, D. G.; Wang, Y. J.; Zhang, G. F.; Chen, Y. R.

    2011-05-01

    The purpose of this study is to develop an emission inventory for major anthropogenic air pollutants and VOC species in the Yangtze River Delta (YRD) region for the year 2007. A "bottom-up" methodology was adopted to compile the inventory based on major emission sources in the sixteen cities of this region. Results show that the emissions of SO2, NOx, CO, PM10, PM2.5, VOCs, and NH3 in the YRD region for the year 2007 are 2392 kt, 2293 kt, 6697 kt, 3116 kt, 1511 kt, 2767 kt, and 459 kt, respectively. Ethylene, mp-xylene, o-xylene, toluene, 1,2,4-trimethylbenzene, 2,4-dimethylpentane, ethyl benzene, propylene, 1-pentene, and isoprene are the key species contributing 77 % to the total ozone formation potential (OFP). The spatial distribution of the emissions shows the emissions and OFPs are mainly concentrated in the urban and industrial areas along the Yangtze River and around Hangzhou Bay. The industrial sources, including power plants other fuel combustion facilities, and non-combustion processes contribute about 97 %, 86 %, 89 %, 91 %, and 69 % of the total SO2, NOx, PM10, PM2.5, and VOC emissions. Vehicles take up 12.3 % and 12.4 % of the NOx and VOC emissions, respectively. Regarding OFPs, the chemical industry, domestic use of paint & printing, and gasoline vehicles contribute 38 %, 24 %, and 12 % to the ozone formation in the YRD region.

  14. Emissions of Methane from the Los Angeles Basin and Comparisons to Inventories

    NASA Astrophysics Data System (ADS)

    Peischl, J.; Ryerson, T. B.; Andrews, A. E.; Commane, R.; Daube, B.; Diskin, G. S.; Dlugokencky, E. J.; Frost, G. J.; Holloway, J. S.; Kofler, J.; Kort, E. A.; Lang, P.; Masarie, K.; McKeen, S. A.; Novelli, P. C.; Sachse, G. W.; Santoni, G. W.; Trainer, M.; Vay, S. A.; Wofsy, S. C.; Xiang, B.; Parrish, D. D.

    2011-12-01

    Airborne measurements of methane (CH4), carbon dioxide (CO2), and carbon monoxide (CO) were made aboard the NOAA P-3 during the CalNex (California Research at the Nexus of Air Quality and Climate Change) field campaign based out of Ontario, California in May and June, 2010. Additionally, measurements of these three trace gas species were made twice daily at the Mount Wilson Observatory. The emission ratio of CH4/CO from observations in the Los Angeles (L.A.) basin was higher than expected from inventories, consistent with past published works (Hsu et al., 2009; Wunch et al., 2009). We examine emission ratios of CH4/CO, CH4/CO2, and CO/CO2 over time, and conclude that emissions of CO in the L.A. basin are decreasing faster than emissions of CH4. CH4 emissions relative to CO2 are decreasing, as well. We further examine CH4 emissions from point sources in the L.A. basin and compare these emissions to point source inventories of the California Air Resources Board.

  15. Emission inventory of primary air pollutants in 2010 from industrial processes in Turkey.

    PubMed

    Alyuz, Ummugulsum; Alp, Kadir

    2014-08-01

    The broad objective of this study was to develop CO2, PM, SOx, CO, NOx, VOC, NH3 and N2O emission inventory of organic and inorganic chemicals, mineral products, metallurgical, petroleum refining, wood products, food industries of Turkey for 2010 for both co]ntrolled and uncontrolled conditions. In this study, industries were investigated in 7 main categories and 53 sub-sectors and a representative number of pollutants per sub-sector were considered. Each industry was evaluated in terms of emitted emissions only from industrial processes, and fuel combustion activities were excluded (except cement industry). The study employed an approach designed in four stages; identification of key categories; activity data & emission factor search; emission factor analyzing; calculation of emissions. Emission factor analyzing required aggregate and firm analysis of sectors and sub-sectors and deeper insights into underlying specific production methods used in the industry to decide on the most representative emission factor. Industry specific abatement technologies were considered by using open-source documents and industry specific reports. Regarding results of this study, mineral industry and iron & steel industry were determined as important contributors of industrial emissions in Turkey in 2010. Respectively, organic chemicals, petroleum refining, and pulp & paper industries had serious contributions to Turkey's air pollutant emission inventory from industrial processes. The results showed that calculated CO2 emissions for year 2010 was 55,124,263 t, also other emissions were 48,853 t PM, 24,533 t SOx, 79,943 t NOx, 31,908 t VOC, 454 t NH3 and 2264 t N2O under controlled conditions.

  16. Emission inventory of primary air pollutants in 2010 from industrial processes in Turkey.

    PubMed

    Alyuz, Ummugulsum; Alp, Kadir

    2014-08-01

    The broad objective of this study was to develop CO2, PM, SOx, CO, NOx, VOC, NH3 and N2O emission inventory of organic and inorganic chemicals, mineral products, metallurgical, petroleum refining, wood products, food industries of Turkey for 2010 for both co]ntrolled and uncontrolled conditions. In this study, industries were investigated in 7 main categories and 53 sub-sectors and a representative number of pollutants per sub-sector were considered. Each industry was evaluated in terms of emitted emissions only from industrial processes, and fuel combustion activities were excluded (except cement industry). The study employed an approach designed in four stages; identification of key categories; activity data & emission factor search; emission factor analyzing; calculation of emissions. Emission factor analyzing required aggregate and firm analysis of sectors and sub-sectors and deeper insights into underlying specific production methods used in the industry to decide on the most representative emission factor. Industry specific abatement technologies were considered by using open-source documents and industry specific reports. Regarding results of this study, mineral industry and iron & steel industry were determined as important contributors of industrial emissions in Turkey in 2010. Respectively, organic chemicals, petroleum refining, and pulp & paper industries had serious contributions to Turkey's air pollutant emission inventory from industrial processes. The results showed that calculated CO2 emissions for year 2010 was 55,124,263 t, also other emissions were 48,853 t PM, 24,533 t SOx, 79,943 t NOx, 31,908 t VOC, 454 t NH3 and 2264 t N2O under controlled conditions. PMID:24576652

  17. A spatially resolved fuel-based inventory of Utah and Colorado oil and natural gas emissions

    NASA Astrophysics Data System (ADS)

    Gorchov Negron, A.; McDonald, B. C.; De Gouw, J. A.; Frost, G. J.

    2015-12-01

    A fuel-based approach is presented for estimating emissions from US oil and natural gas production that utilizes state-level fuel surveys of oil and gas engine activity, well-level production data, and emission factors for oil and gas equipment. Emissions of carbon dioxide (CO2) and nitrogen oxides (NOx) are mapped on a 4 km x 4 km horizontal grid for 2013-14 in Utah and Colorado. Emission sources include combustion from exploration (e.g., drilling), production (e.g., heaters, dehydrators, and compressor engines), and natural gas processing plants, which comprise a large fraction of the local combustion activity in oil and gas basins. Fuel-based emission factors of NOx are from the U.S. Environmental Protection Agency, and applied to spatially-resolved maps of CO2 emissions. Preliminary NOx emissions from this study are estimated for the Uintah Basin, Utah, to be ~5300 metric tons of NO2-equivalent in 2013. Our result compares well with an observations-based top-down emissions estimate of NOx derived from a previous study, ~4200 metric tons of NO2-equivalent. By contrast, the 2011 National Emissions Inventory estimates oil and gas emissions of NOx to be ~3 times higher than our study in the Uintah Basin. We intend to expand our fuel-based approach to map combustion-related emissions in other U.S. oil and natural gas basins and compare with additional observational datasets.

  18. Spatial representation of a current NOx emission inventory over China: A satellite perspective

    NASA Astrophysics Data System (ADS)

    Geng, G.; Zhang, Q.; Wang, S.; He, K.; Martin, R. V.; Lamsal, L. N.; Zheng, B.

    2012-12-01

    The top-down approach provides valuable constraints to bottom-up emission inventories. In this work, we evaluated the spatial representation of a current NOx emission inventory over China using NO2 retrievals from the Ozone Monitoring Instrument (OMI) and the nested-grid GEOS-Chem model. Comparison between model simulations and satellite observations showed that modeled NO2 columns were underestimated in most medium-sized cities, while good agreement was found in megacities such as Beijing, Shanghai. Large discrepancies between model simulations and satellite retrievals were found in grids with high Gross domestic product (GDP) value across different regions of China. We also found that the growth rates of NO2 columns have slowed in Chinese megacities over recent years, in contrast with medium-sized cities where the NO2 columns were soaring. Sensitivity simulations using emissions allocated by different spatial surrogates (e.g. population density, location, nighttime light, industrial GDP, road networks) indicated that the uncertainties in spatial representation of the current emission inventory might be caused by inappropriate spatial proxies.

  19. Evaluation of national emissions inventories of anthropogenic air pollutants for Brunei Darussalam

    NASA Astrophysics Data System (ADS)

    Dotse, Sam-Quarcoo; Dagar, Lalit; Petra, Mohammad Iskandar; De Silva, Liyanage C.

    2016-05-01

    Haze and other air pollution related problems are getting more significant in Brunei Darussalam but till date there is absence of comprehensive national emission inventory for Brunei Darussalam. Although there are few regional and global inventories available for Brunei Darussalam, large variations in the emission estimates exist in these datasets. Therefore, there is an important need for an updated inventory, based on data available from government and other sources. This study presents a sector-wise anthropogenic emission estimates and trends (2001-2012) for the pollutants CO2, CH4, N2O, NOX, NMVOC, CO, SOX, and PM10. The results suggest no significant contributions from residential sector (<1%) whilst road transport is the main contributor for most of the pollutants. CO2 is largely emitted by power plants (∼72% in 2001 and∼ 62% in 2012) and the main source of CH4 is Solid waste disposal and wastewater handling (∼92%). There were also significant contributions from industrial processes and solvent use to NMVOC and PM10 emissions (∼74% and ∼45% respectively).

  20. High-global warming potential F-gas emissions in California: comparison of ambient-based versus inventory-based emission estimates, and implications of refined estimates.

    PubMed

    Gallagher, Glenn; Zhan, Tao; Hsu, Ying-Kuang; Gupta, Pamela; Pederson, James; Croes, Bart; Blake, Donald R; Barletta, Barbara; Meinardi, Simone; Ashford, Paul; Vetter, Arnie; Saba, Sabine; Slim, Rayan; Palandre, Lionel; Clodic, Denis; Mathis, Pamela; Wagner, Mark; Forgie, Julia; Dwyer, Harry; Wolf, Katy

    2014-01-21

    To provide information for greenhouse gas reduction policies, the California Air Resources Board (CARB) inventories annual emissions of high-global-warming potential (GWP) fluorinated gases, the fastest growing sector of greenhouse gas (GHG) emissions globally. Baseline 2008 F-gas emissions estimates for selected chlorofluorocarbons (CFC-12), hydrochlorofluorocarbons (HCFC-22), and hydrofluorocarbons (HFC-134a) made with an inventory-based methodology were compared to emissions estimates made by ambient-based measurements. Significant discrepancies were found, with the inventory-based emissions methodology resulting in a systematic 42% under-estimation of CFC-12 emissions from older refrigeration equipment and older vehicles, and a systematic 114% overestimation of emissions for HFC-134a, a refrigerant substitute for phased-out CFCs. Initial, inventory-based estimates for all F-gas emissions had assumed that equipment is no longer in service once it reaches its average lifetime of use. Revised emission estimates using improved models for equipment age at end-of-life, inventories, and leak rates specific to California resulted in F-gas emissions estimates in closer agreement to ambient-based measurements. The discrepancies between inventory-based estimates and ambient-based measurements were reduced from -42% to -6% for CFC-12, and from +114% to +9% for HFC-134a. PMID:24328112

  1. Ship emissions inventory, social cost and eco-efficiency in Shanghai Yangshan port

    NASA Astrophysics Data System (ADS)

    Song, Su

    2014-01-01

    This study estimated both the in-port ship emissions inventory (CO2, CH4, N2O, PM10, PM2.5, NOx, SOx, CO, and HC) and the emission associated social cost in Yangshan port of Shanghai. A sophisticated activity-based methodology, supported by the ship-by-ship and real-time data from the modern automatic identification system (AIS), was introduced to obtain accurate estimates of ship emissions. The detailed spatial and temporal emission inventories can be used as input for air quality dispersion modeling in the port and vicinities. The social cost of the emission impact on the Yangshan port coastal regions was then assessed based on the emissions inventories. The social cost covers the impact on human health, the environment, and the climate of the coastal community. Finally, the ship emissions was combined with port's basic operation profiles, i.e. container throughput, ship calls, and port revenue, in an attempt to assess the port's “eco-efficiency”, which indicates the port performance with social-economic and environmental concerns. This study filled the gap of previous studies by providing the AIS-supported activity-based emission inventory to facilitate the social cost-benefit analysis for the emission abatement policies. The result shows that i) the amount of in-port ship emissions of CO2, CH4, N2O, PM10, PM2.5, NOx, SOx, CO, and HC in Yangshan port area was 578,444 tons, 10 tons, 33 tons, 1078 tons (PM10, inducing PM2.5), 859 tons (PM2.5 only), 10,758 tons, 5623 tons, 1136 tons, and 519 tons, respectively, with ii) a total social cost of 287 million; iii) the values of the three parameters of the port eco-efficiency performance were 36,528 per 1,000 TEU throughput, 43,993 per ship call, and 44 million per billion US$ port revenue (4.4% of port revenue), respectively in 2009.

  2. Impact of an improved Cuban emissions inventory on air quality simulations

    NASA Astrophysics Data System (ADS)

    Sanchez Gacita, M.; Alonso, M. F.; Longo, K. M.; de Freitas, S. R.

    2010-12-01

    The energy sector in the Central America and Caribbean regions is primarily fossil fuel based and one of the major sources of air pollution in the region. In Cuba, energy production is responsible for 99% of SO2 emissions, 98% of NOX and 94% of CO, with emissions in 2000 of 588.59 Gg, 149.57 Gg and 536.42 Gg, respectively, according to the Cuban National Inventory - CNI. Electric power generation plants, the most important sub-sector, are highlighted as point sources of high emissions, in particular, SO2. Global inventories are shown to be inaccurate for Cuba. RETRO has non-zero data for just one cell, over the city of Havana. EDGAR has deficiencies in its geographical distribution, with no emissions over the city of Havana, and the distribution of emissions by sectors is unrealistic according to the CNI: for instance, in the case of SO2, it distributes emissions nearly equally between electricity generation and the remaining sectors, which is inaccurate. More importantly, emissions are overestimated, with the notable exception of SO2 and NMVOC. The most important reasons are the particularities of Cuba, including the extensive employ of fossil fuels with little refining and high sulfur content in energy production and industrial processes such as asphalt production, and the use of low efficiency technologies. This work presents an improved emissions inventory with CNI data and detailed emissions for all major power generation plants. The impact of this improvement was assessed through numerical air quality simulations of the transport and transformation of these emissions from a regional perspective, conducted with the CCATT-BRAMS 3D atmospheric chemical transport model, developed and maintained by INPE, Brazil. Boundary conditions were supplied by global model MOCAGE with chemistry scheme RELACS. Simulations with the new inventory were conducted with CATT-BRAMS using chemical mechanism RELACS, incorporated as part of this work, for two months (January and August

  3. NICKEL SPECIES EMISSION INVENTORY FOR OIL-FIRED BOILERS

    SciTech Connect

    Kevin C. Galbreath; Richard L. Schulz; Donald L. Toman; Carolyn M. Nyberg

    2004-01-01

    Representative duplicate fly ash samples were obtained from the stacks of 400-MW and 385-MW utility boilers (Unit A and Unit B, respectively) using a modified U.S. Environmental Protection Agency (EPA) Method 17 sampling train assembly as they burned .0.9 and 0.3 wt% S residual oils, respectively, during routine power plant operations. Residual oil fly ash (ROFA) samples were analyzed for nickel (Ni) concentrations and speciation using inductively coupled plasma-atomic emission spectroscopy, x-ray absorption fine structure (XAFS) spectroscopy, x-ray diffraction (XRD), and a water-soluble Ni extraction method. ROFA water extraction residues were also analyzed for Ni speciation using XAFS and XRD. Total Ni concentrations in the ROFAs were similar, ranging from 1.3 to 1.5 wt%; however, stack gas Ni concentrations in the Unit A were {approx}990 {micro}g/Nm{sup 3} compared to {approx}620 {micro}g/Nm{sup 3} for Unit B because of the greater residual oil feed rates employed at Unit A to attain higher load (i.e., MW) conditions with a lower heating value oil. Ni speciation analysis results indicate that ROFAs from Unit A contain about 3 wt% NiSO{sub 4} {center_dot} xH{sub 2}O (where x is assumed to be 6 for calculation purposes) and a Ni-containing spinel compound, similar in composition to (Mg,Ni)(Al,Fe){sub 2}O{sub 4}. ROFAs from Unit B contain on average 2.0 wt% NiSO{sub 4} {center_dot} 6H{sub 2}O and 1.1 wt% NiO. XAFS and XRD analyses did not detect any nickel sulfide compounds, including nickel subsulfide (Ni{sub 3}S{sub 2}) (XAFS detection limit is 5% of the total Ni concentration). In addition, XAFS measurements indicated that inorganic sulfate and organic thiophene species account for >97% of the total sulfur in the ROFAs. The presence of NiSO{sub 4} {center_dot} xH{sub 2}O and nickel oxide compound mixtures and lack of carcinogenic Ni{sub 3}S{sub 2} or nickel sulfide compounds (e.g., NiS, NiS{sub 2}) in ROFAs stack-sampled from 400- and 385-MW boilers are contrary

  4. GHG emissions inventory for on-road transportation in the town of Sassari (Sardinia, Italy)

    NASA Astrophysics Data System (ADS)

    Sanna, Laura; Ferrara, Roberto; Zara, Pierpaolo; Duce, Pierpaolo

    2016-04-01

    The IPCC Fifth Assessment Report (AR5) accounts an increase of the total annual anthropogenic GHG emissions between 2000 and 2010 that directly came from the transport sector. In 2010, 14% of GHG emissions were released by transport and fossil-fuel-related CO2 emissions reached about 32 GtCO2 per year. The report also considers adaptation and mitigation as complementary strategies for reducing the risks of climate change for sustainable development of urban areas. This paper describes the on-road traffic emission estimated in the framework of a Sardinian regional project [1] for the town of Sassari (Sardinia, Italy), one of the Sardinian areas where the fuel consumption for on-road transportation purposes is higher [2]. The GHG emissions have been accounted (a) by a calculation-based methodology founded on a linear relationship between source activity and emission, and (b) by the COPERT IV methodology through the EMITRA (EMIssions from road TRAnsport) software tool [3]. Inventory data for annual fossil fuel consumption associated with on-road transportation (diesel, gasoline, gas) have been collected through the Dogane service, the ATP and ARST public transport services and vehicle fleet data are available from the Public Vehicle Database (PRA), using 2010 as baseline year. During this period, the estimated CO2 emissions accounts for more than 180,000 tCO2. The calculation of emissions due to on-road transport quantitatively estimates CO2 and other GHG emissions and represents a useful baseline to identify possible adaptation and mitigation strategies to face the climate change risks at municipal level. Acknowledgements This research was funded by the Sardinian Regional Project "Development, functional checking and setup of an integrated system for the quantification of CO2 net exchange and for the evaluation of mitigation strategies at urban and territorial scale", (Legge Regionale 7 agosto 2007, No. 7). References [1] Sanna L., Ferrara R., Zara P. & Duce P. (2014

  5. Improving the accuracy of vehicle emissions profiles for urban transportation greenhouse gas and air pollution inventories.

    PubMed

    Reyna, Janet L; Chester, Mikhail V; Ahn, Soyoung; Fraser, Andrew M

    2015-01-01

    Metropolitan greenhouse gas and air emissions inventories can better account for the variability in vehicle movement, fleet composition, and infrastructure that exists within and between regions, to develop more accurate information for environmental goals. With emerging access to high quality data, new methods are needed for informing transportation emissions assessment practitioners of the relevant vehicle and infrastructure characteristics that should be prioritized in modeling to improve the accuracy of inventories. The sensitivity of light and heavy-duty vehicle greenhouse gas (GHG) and conventional air pollutant (CAP) emissions to speed, weight, age, and roadway gradient are examined with second-by-second velocity profiles on freeway and arterial roads under free-flow and congestion scenarios. By creating upper and lower bounds for each factor, the potential variability which could exist in transportation emissions assessments is estimated. When comparing the effects of changes in these characteristics across U.S. cities against average characteristics of the U.S. fleet and infrastructure, significant variability in emissions is found to exist. GHGs from light-duty vehicles could vary by -2%-11% and CAP by -47%-228% when compared to the baseline. For heavy-duty vehicles, the variability is -21%-55% and -32%-174%, respectively. The results show that cities should more aggressively pursue the integration of emerging big data into regional transportation emissions modeling, and the integration of these data is likely to impact GHG and CAP inventories and how aggressively policies should be implemented to meet reductions. A web-tool is developed to aide cities in improving emissions uncertainty. PMID:25438089

  6. Improving the accuracy of vehicle emissions profiles for urban transportation greenhouse gas and air pollution inventories.

    PubMed

    Reyna, Janet L; Chester, Mikhail V; Ahn, Soyoung; Fraser, Andrew M

    2015-01-01

    Metropolitan greenhouse gas and air emissions inventories can better account for the variability in vehicle movement, fleet composition, and infrastructure that exists within and between regions, to develop more accurate information for environmental goals. With emerging access to high quality data, new methods are needed for informing transportation emissions assessment practitioners of the relevant vehicle and infrastructure characteristics that should be prioritized in modeling to improve the accuracy of inventories. The sensitivity of light and heavy-duty vehicle greenhouse gas (GHG) and conventional air pollutant (CAP) emissions to speed, weight, age, and roadway gradient are examined with second-by-second velocity profiles on freeway and arterial roads under free-flow and congestion scenarios. By creating upper and lower bounds for each factor, the potential variability which could exist in transportation emissions assessments is estimated. When comparing the effects of changes in these characteristics across U.S. cities against average characteristics of the U.S. fleet and infrastructure, significant variability in emissions is found to exist. GHGs from light-duty vehicles could vary by -2%-11% and CAP by -47%-228% when compared to the baseline. For heavy-duty vehicles, the variability is -21%-55% and -32%-174%, respectively. The results show that cities should more aggressively pursue the integration of emerging big data into regional transportation emissions modeling, and the integration of these data is likely to impact GHG and CAP inventories and how aggressively policies should be implemented to meet reductions. A web-tool is developed to aide cities in improving emissions uncertainty.

  7. Compilation and analyses of emissions inventories for NOAA`s atmospheric chemistry project. Progress report, August 1997

    SciTech Connect

    Benkovitz, C.M.; Mubaraki, M.A.

    1997-09-01

    Global inventories of anthropogenic emissions of oxides of nitrogen (NO{sub x}) for circa 1985 and 1990 and Non-Methane Volatile Organic Compounds (NMVOCs) for circa 1990 have been compiled by this project. Work on the inventories has been carried out under the umbrella of the Global Emissions Inventory Activity (GEIA) of the International Global Atmospheric Chemistry (IGAC) Program. The 1985 NO{sub x} inventory was compiled using default data sets of global emissions that were refined via the use of more detailed regional data sets; this inventory is being distributed to the scientific community at large as the GEIA Version 1A inventory. Global emissions of NO{sub x} for 1985 are estimated to be 21 Tg N y{sup -1}, with approximately 84% originating in the Northern Hemisphere. The 1990 inventories of NO{sub x} and NMVOCs were compiled using unified methodologies and data sets in collaboration with the Netherlands National Institute of Public Health and Environmental Protection (Rijksinstituut Voor Volksgezondheid en Milieuhygiene, RIVM) and the Division of Technology for Society of the Netherlands Organization for Applied Scientific Research, (IMW-TNO); these emissions will be used as the default estimates to be updated with more accurate regional data. The NMVOC inventory was gridded and speciated into 23 chemical categories.

  8. Emissions inventory of PM2.5 trace elements across the United States.

    PubMed

    Reff, Adam; Bhave, Prakash V; Simon, Heather; Pace, Thompson G; Pouliot, George A; Mobley, J David; Houyoux, Marc

    2009-08-01

    This paper presents the first National Emissions Inventory (NEI) of fine particulate matter (PM2.5) that includes the full suite of PM2.5 trace elements (atomic number > 10) measured at ambient monitoring sites across the U.S. PM2.5 emissions in the NEI were organized and aggregated into a set of 84 source categories for which chemical speciation profiles are available (e.g., Unpaved Road Dust Agricultural Soil, Wildfires). Emission estimates for ten metals classified as Hazardous Air Pollutants (HAP) were refined using data from a recent HAP NEI. All emissions were spatially gridded, and U.S. emissions maps for dozens of trace elements (e.g., Fe, Ti) are presented for the first time. Nationally, the trace elements emitted in the highest quantities are silicon (3.8 x 10(5) ton/yr), aluminum (1.4 x 10(5) ton/yr), and calcium (1.3 x 10(5) ton/yr). Our chemical characterization of the PM2.5 inventory shows that most of the previously unspeciated emissions are comprised of crustal elements, potassium, sodium, chlorine, and metal-bound oxygen. This work also reveals that the largest PM2.5 sources lacking specific speciation data are off-road diesel-powered mobile equipment, road construction dust, marine vessels, gasoline-powered boats, and railroad locomotives. PMID:19731678

  9. On-Road Diesel Truck Emissions Measurement and Inventory Development in Chengdu City of China

    NASA Astrophysics Data System (ADS)

    Chen, J.; Ye, H.

    2014-12-01

    Real-world emission tests of three diesel trucks were conducted using SEMTECH-EcoStar gas analyzer produced by the US Sensors Company and Mi2 particle analyzer produced by the Finland Pegasor Company. The test duration was one day for each truck and 8813, 10407 and 11102 sets of effective post-processed data were collected for analyzing. The influence of vehicle speed, driving mode and vehicle mass on emission was analyzed and emission rates were calculated. Light-duty and heavy-duty truck activities in Chengdu were studied by survey and statistical analysis. The population of trucks was acquired from the Public Security Department of Sichuan province. Based on the test data and local collected data, this paper calculated an emission inventory of diesel trucks in Chengdu, the economic center of southwestern china. Results showed that the emission rates of CO, NO, THC and PM for the selected vehicles were(0.95~7.54)g/km,(1.03~3.97)g/km,(0.64~0.81)g/km and (0.01~0.07)g/km respectively. The annual vehicle activities of light-duty and heavy-duty trucks in Chengdu were 30,000 km and 44,000 km. The emission inventory of CO, NO, THC and PM in Chengdu were 23,000t/a, 15,000t/a, 4,000t/a and 200t/a.

  10. Emissions inventory of PM2.5 trace elements across the United States

    SciTech Connect

    Adam Reff; Prakash V. Bhave; Heather Simon; Thompson G. Pace; George A. Pouliot; J. David Mobley; Marc Houyoux

    2009-08-15

    This paper presents the first National Emissions Inventory (NEI) of fine particulate matter (PM2.5) that includes the full suite of PM2.5 trace elements (atomic number >10) measured at ambient monitoring sites across the U.S. PM2.5 emissions in the NEI were organized and aggregated into a set of 84 source categories for which chemical speciation profiles are available (e.g., Unpaved Road Dust, Agricultural Soil, Wildfires). Emission estimates for ten metals classified as Hazardous Air Pollutants (HAP) were refined using data from a recent HAP NEI. All emissions were spatially gridded, and U.S. emissions maps for dozens of trace elements (e.g., Fe, Ti) are presented for the first time. Nationally, the trace elements emitted in the highest quantities are silicon (3.8 x 10{sup 5} ton/yr), aluminium (1.4 x 10{sup 5} ton/yr), and calcium (1.3 x 10{sup 5} ton/yr). Our chemical characterization of the PM2.5 inventory shows that most of the previously unspeciated emissions are comprised of crustal elements, potassium, sodium, chlorine, and metal-bound oxygen. Coal combustion is the largest source of S, Se, Sr, Hg and primary sulfates. This work also reveals that the largest PM2.5 sources lacking specific speciation data are off-road diesel-powered mobile equipment, road construction dust, marine vessels, gasoline-powered boats, and railroad locomotives. 28 refs., 4 figs.

  11. A comprehensive inventory of ship traffic exhaust emissions in the European sea areas in 2011

    NASA Astrophysics Data System (ADS)

    Jalkanen, J.-P.; Johansson, L.; Kukkonen, J.

    2016-01-01

    Emissions originating from ship traffic in European sea areas were modelled using the Ship Traffic Emission Assessment Model (STEAM), which uses Automatic Identification System data to describe ship traffic activity. We have estimated the emissions from ship traffic in the whole of Europe in 2011. We report the emission totals, the seasonal variation, the geographical distribution of emissions, and their disaggregation between various ship types and flag states. The total ship emissions of CO2, NOx, SOx, CO, and PM2.5 in Europe for year 2011 were estimated to be 121, 3.0, 1.2, 0.2, and 0.2 million tons, respectively. The emissions of CO2 from the Baltic Sea were evaluated to be more than a half (55 %) of the emissions of the North Sea shipping; the combined contribution of these two sea regions was almost as high (88 %) as the total emissions from ships in the Mediterranean. As expected, the shipping emissions of SOx were significantly lower in the SOx Emission Control Areas, compared with the corresponding values in the Mediterranean. Shipping in the Mediterranean Sea is responsible for 40 and 49 % of the European ship emitted CO2 and SOx emissions, respectively. In particular, this study reported significantly smaller emissions of NOx, SOx, and CO for shipping in the Mediterranean than the EMEP inventory; however, the reported PM2.5 emissions were in a fairly good agreement with the corresponding values reported by EMEP. The vessels registered to all EU member states are responsible for 55 % of the total CO2 emitted by ships in the study area. The vessels under the flags of convenience were responsible for 25 % of the total CO2 emissions.

  12. A comprehensive inventory of ship traffic exhaust emissions in the European sea areas in 2011

    NASA Astrophysics Data System (ADS)

    Jalkanen, J.-P.; Johansson, L.; Kukkonen, J.

    2015-03-01

    Emissions originated from ship traffic in European sea areas were modelled using the Ship Traffic Emission Assessment Model (STEAM), which uses Automatic Identification System data to describe ship traffic activity. We have estimated the emissions from ship traffic in the whole of Europe in 2011. We report the emission totals, the seasonal variation, the geographical distribution of emissions, and their disaggregation between various ship types and flag states. The total ship emissions of CO2, NOx, SOx, CO and PM2.5 in Europe for year 2011 were estimated to be 131, 2.9, 1.2, 0.2 and 0.3 million tons, respectively. The emissions of CO2 from Baltic Sea were evaluated to be more than a half (58%) of the emissions of the North Sea shipping; the combined contribution of these two sea regions was almost as high (96%) as the total emissions from ships in the Mediterranean. As expected, the shipping emissions of SOx were significantly lower in the SOx Emission Control Areas, compared with the corresponding values in the Mediterranean. Shipping in the Mediterranean Sea is responsible for 39 and 49% of the European ship emitted CO2 and SOx emissions, respectively. In particular, this study reported significantly smaller emissions of NOx, SOx and CO for shipping in the Mediterranean than the EMEP inventory; however, the reported PM2.5 emissions were in a fairly good agreement with the corresponding values reported by EMEP. The vessels registered to all EU member states are responsible for 55% of the total CO2 emitted by ships in the study area. The vessels under the flags of convenience were responsible for 25% of the total CO2 emissions.

  13. Historical variations of biogenic volatile organic compound emission inventories in China, 1981-2003

    NASA Astrophysics Data System (ADS)

    Li, L. Y.; Xie, S. D.

    2014-10-01

    To evaluate the variations in temporal and spatial distribution of biogenic volatile organic compound (BVOC) emissions in China, historical BVOC emission inventories at a spatial resolution of 36 km × 36 km for the period of 1981-2003 were developed firstly. Based on the time-varying statistical data and Vegetation Atlas of China (1:1,000,000), emissions of isoprene, 37 monoterpenes, 32 sesquiterpenes, and other volatile organic compounds (OVOCs) were estimated using MEGANv2.1 driven by WRF model. Results show China's BVOC emissions had increased by 28.01% at an annual average rate of 1.27% from 37.89 Tg in 1981 to 48.50 Tg in 2003. Emissions of isoprene, monoterpenes, sesquiterpenes, and OVOCs had increased by 41.60%, 34.78%, 41.05%, and 4.89%, respectively. With fixed meteorological variables, the estimated BVOC emissions would increase by 19.25%, resulting from the increasing of vegetation biomass during the last 23 years. On average, isoprene, monoterpenes, sesquiterpenes, and OVOCs were responsible for 52.40%, 12.73%, 2.58%, and 32.29% of the national BVOC emissions, respectively. β-pinene and α-pinene, farnesene and caryophyllene were the largest contributors to the total monoterpene and sesquiterpene emissions, respectively. The highest emissions were found over northeastern, southeastern, southwestern China, Qinling Mountain, and Hainan and Taiwan provinces. The regions with high emissions had been expanding over the years, especially in the Changbai Mountain, southern China, and southwestern forest regions. The lowest emissions in southern China occurred in 1984-1988. Almost all the provinces had experienced increasing emissions, but their contributions to the national emissions differed significantly over the past 23 years. Yunnan, Guangxi, Heilongjiang, Jiangxi, Fujian, Guangdong, and Sichuan provinces always dominated the national BVOC emissions, excluding in 1977-1981, when the three northeastern provinces had relatively lower emissions.

  14. [Emission Inventory of Crop Residues Field Burning and Its Temporal and Spatial Distribution in Sichuan Province].

    PubMed

    He, Min; Wang, Xing-rui; Han, Li; Feng, Xiao-qiong; Mao, Xue

    2015-04-01

    Based on the collected activity data, the 2012 emission inventory of crop residues field burning in Sichuan province was developed through the emission factor approach. Besides, the temporal and spatial distribution of pollutant emissions was also analysed in this paper. The results showed that the total emissions of SO2, NO(x), NH3, CH4, NMVOC, CO, PM2.5, EC and OC from crop residues field burning in Sichuan province in the year of 2012 were 1 210, 12 185, 2 827, 20 659, 40 463, 292 671, 39 277, 1 984 and 10 215 t, respectively; The rice straw, wheat straw, corn straw and oil rape straw were four major contributors to pollutant emissions, with a total contribution about 88% - 94%; Crop residues field burning emissions were affected by agricultural harvesting. Temporally, the emissions were concentrated in July and August with a small peak in May; Spatially, the Chengdu plain, the Northern area and the Eastern area of Sichuan province were the highest emission areas, while the Western area had relatively low emissions; The key uncertain sources included emission factors and parameters used for estimating crop burning amounts.

  15. Dynamic evaluation of regional air quality model’s response to emission reductions in the presence of uncertain emission inventories

    NASA Astrophysics Data System (ADS)

    Napelenok, Sergey L.; Foley, Kristen M.; Kang, Daiwen; Mathur, Rohit; Pierce, Thomas; Rao, S. Trivikrama

    2011-08-01

    A method is presented and applied for evaluating an air quality model's changes in pollutant concentrations stemming from changes in emissions while explicitly accounting for the uncertainties in the base emission inventory. Specifically, the Community Multiscale Air Quality (CMAQ) model is evaluated for its ability to simulate the change in ozone (O 3) levels in response to significant reductions in nitric oxide (NO x = NO + NO 2) emissions from the NO x State Implementation Plan (SIP) Call and vehicle fleet turnover between the years of 2002 and 2005. The dynamic model evaluation (i.e., the evaluation of a model's ability to predict changes in pollutant levels given changes in emissions) differs from previous approaches by explicitly accounting for known uncertainties in the NO x emissions inventories. Uncertainty in three sectors of NO x emissions is considered - area sources, mobile sources, and point sources - and is propagated using sensitivity coefficients calculated by the decoupled direct method in three dimensions (DDM-3D). The change in O 3 levels between 2002 and 2005 is estimated based on differences in the empirical distributions of the modeled and observed data during the two years. Results indicate that the CMAQ model is able to reproduce the observed change in daily maximum 8-hr average O 3 levels at more than two-thirds of Air Quality System (AQS) monitoring locations when a relatively moderate amount of uncertainty (50%) is assumed in area and mobile emissions of NO x together with a low amount of uncertainty (3%) in the utility sector (elevated point sources) emissions. The impact of other sources of uncertainty in the model is also briefly explored.

  16. Development of a United States - Mexico emissions inventory for the Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study

    SciTech Connect

    Hampden Kuhns; Eladio M. Knipping; Jeffrey M. Vukovich,

    2005-05-01

    The Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study investigated the sources of haze at Big Bend National Park in southwest Texas. The modeling domain includes most of the continental United States and Mexico. The BRAVO emissions inventory was constructed from the 1999 National Emission Inventory for the United States, modified to include finer-resolution data for Texas and 13 U.S. states in close proximity. The inventory includes emissions for CO, nitrogen oxides, sulfur dioxide, volatile organic compounds (VOCs), ammonia, particulate matter (PM) {lt}10 {mu}m in aerodynamic diameter, and PM {lt}2.5 {mu}m in aerodynamic diameter. The SMOKE modeling system was used to generate gridded emissions fields for use with the Regional Modeling System for Aerosols and Deposition (REMSAD) and the Community Multiscale Air Quality model modified with the Model of Aerosol Dynamics, Reaction, Ionization and Dissolution (CMAQ-MADRID). The compilation of the inventory, supporting model input data, and issues encountered during the development of the inventory are documented. A comparison of the BRAVO emissions inventory for Mexico with other emerging Mexican emission inventories illustrates their uncertainty. 65 refs., 4 figs., 9 tabs.

  17. Air pollution monitoring using emission inventories combined with the moss bag approach.

    PubMed

    Iodice, P; Adamo, P; Capozzi, F; Di Palma, A; Senatore, A; Spagnuolo, V; Giordano, S

    2016-01-15

    Inventory of emission sources and biomonitoring with moss transplants are two different methods to evaluate air pollution. In this study, for the first time, both these approaches were simultaneously applied in five municipalities in Campania (southern Italy), deserving attention for health-oriented interventions as part of a National Interest Priority Site. The pollutants covered by the inventory were CO, NOx, particulate matter (PM10), volatile organic compounds (VOCs), and some heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb, Se, and Zn). The biomonitoring survey was based on the use of the devitalized moss Hypnum cupressiforme transplanted into bags, following a harmonized protocol. The exposure covered 40 agricultural and urban/residential sites, with half of them located in proximity to roads. The pollutants monitored were Al, As, Cd, Cr, Cu, Fe, Hg, Ni, Pb, Se, and Zn, as well as total polycyclic aromatic hydrocarbons (PAHs) only in five sites. Using the emission inventory approach, high emission loads were detected for all the major air pollutants and the following heavy metals: Cr, Cu, Ni, Pb and Zn, over the entire study area. Arsenic, Pb, and Zn were the elements most accumulated by moss. Total PAH postexposure contents were higher than the preexposure values (~20-50% of initial value). Moss uptakes did not differ substantially among municipalities or within exposure sites. In the five municipalities, a similar spatial pattern was evidenced for Pb by emission inventory and moss accumulation. Both approaches indicated the same most polluted municipality, suggesting their combined use as a valuable resource to reveal contaminants that are not routinely monitored.

  18. Air pollution monitoring using emission inventories combined with the moss bag approach.

    PubMed

    Iodice, P; Adamo, P; Capozzi, F; Di Palma, A; Senatore, A; Spagnuolo, V; Giordano, S

    2016-01-15

    Inventory of emission sources and biomonitoring with moss transplants are two different methods to evaluate air pollution. In this study, for the first time, both these approaches were simultaneously applied in five municipalities in Campania (southern Italy), deserving attention for health-oriented interventions as part of a National Interest Priority Site. The pollutants covered by the inventory were CO, NOx, particulate matter (PM10), volatile organic compounds (VOCs), and some heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb, Se, and Zn). The biomonitoring survey was based on the use of the devitalized moss Hypnum cupressiforme transplanted into bags, following a harmonized protocol. The exposure covered 40 agricultural and urban/residential sites, with half of them located in proximity to roads. The pollutants monitored were Al, As, Cd, Cr, Cu, Fe, Hg, Ni, Pb, Se, and Zn, as well as total polycyclic aromatic hydrocarbons (PAHs) only in five sites. Using the emission inventory approach, high emission loads were detected for all the major air pollutants and the following heavy metals: Cr, Cu, Ni, Pb and Zn, over the entire study area. Arsenic, Pb, and Zn were the elements most accumulated by moss. Total PAH postexposure contents were higher than the preexposure values (~20-50% of initial value). Moss uptakes did not differ substantially among municipalities or within exposure sites. In the five municipalities, a similar spatial pattern was evidenced for Pb by emission inventory and moss accumulation. Both approaches indicated the same most polluted municipality, suggesting their combined use as a valuable resource to reveal contaminants that are not routinely monitored. PMID:26479914

  19. Development of a United States-Mexico Emissions Inventory for the Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study.

    PubMed

    Kuhns, Hampden; Knipping, Eladio M; Vukovich, Jeffrey M

    2005-05-01

    The Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study was commissioned to investigate the sources of haze at Big Bend National Park in southwest Texas. The modeling domain of the BRAVO Study includes most of the continental United States and Mexico. The BRAVO emissions inventory was constructed from the 1999 National Emission Inventory for the United States, modified to include finer-resolution data for Texas and 13 U.S. states in close proximity. The first regional-scale Mexican emissions inventory designed for air-quality modeling applications was developed for 10 northern Mexican states, the Tula Industrial Park in the state of Hidalgo, and the Popocatépetl volcano in the state of Puebla. Emissions data were compiled from numerous sources, including the U.S. Environmental Protection Agency (EPA), the Texas Natural Resources Conservation Commission (now Texas Commission on Environmental Quality), the Eastern Research Group, the Minerals Management Service, the Instituto Nacional de Ecología, and the Instituto Nacional de Estadistica Geografía y Informática. The inventory includes emissions for CO, nitrogen oxides, sulfur dioxide, volatile organic compounds (VOCs), ammonia, particulate matter (PM) < 10 microm in aerodynamic diameter, and PM < 2.5 microm in aerodynamic diameter. Wind-blown dust and biomass burning were not included in the inventory, although high concentrations of dust and organic PM attributed to biomass burning have been observed at Big Bend National Park. The SMOKE modeling system was used to generate gridded emissions fields for use with the Regional Modeling System for Aerosols and Deposition (REMSAD) and the Community Multiscale Air Quality model modified with the Model of Aerosol Dynamics, Reaction, Ionization and Dissolution (CMAQ-MADRID). The compilation of the inventory, supporting model input data, and issues encountered during the development of the inventory are documented. A comparison of the BRAVO emissions

  20. Development of a United States-Mexico Emissions Inventory for the Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study.

    PubMed

    Kuhns, Hampden; Knipping, Eladio M; Vukovich, Jeffrey M

    2005-05-01

    The Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study was commissioned to investigate the sources of haze at Big Bend National Park in southwest Texas. The modeling domain of the BRAVO Study includes most of the continental United States and Mexico. The BRAVO emissions inventory was constructed from the 1999 National Emission Inventory for the United States, modified to include finer-resolution data for Texas and 13 U.S. states in close proximity. The first regional-scale Mexican emissions inventory designed for air-quality modeling applications was developed for 10 northern Mexican states, the Tula Industrial Park in the state of Hidalgo, and the Popocatépetl volcano in the state of Puebla. Emissions data were compiled from numerous sources, including the U.S. Environmental Protection Agency (EPA), the Texas Natural Resources Conservation Commission (now Texas Commission on Environmental Quality), the Eastern Research Group, the Minerals Management Service, the Instituto Nacional de Ecología, and the Instituto Nacional de Estadistica Geografía y Informática. The inventory includes emissions for CO, nitrogen oxides, sulfur dioxide, volatile organic compounds (VOCs), ammonia, particulate matter (PM) < 10 microm in aerodynamic diameter, and PM < 2.5 microm in aerodynamic diameter. Wind-blown dust and biomass burning were not included in the inventory, although high concentrations of dust and organic PM attributed to biomass burning have been observed at Big Bend National Park. The SMOKE modeling system was used to generate gridded emissions fields for use with the Regional Modeling System for Aerosols and Deposition (REMSAD) and the Community Multiscale Air Quality model modified with the Model of Aerosol Dynamics, Reaction, Ionization and Dissolution (CMAQ-MADRID). The compilation of the inventory, supporting model input data, and issues encountered during the development of the inventory are documented. A comparison of the BRAVO emissions

  1. Agricultural soil greenhouse gas emissions: a review of national inventory methods.

    PubMed

    Lokupitiya, Erandathie; Paustian, Keith

    2006-01-01

    Parties to the United Nations Framework Convention on Climate Change (UNFCCC) are required to submit national greenhouse gas (GHG) inventories, together with information on methods used in estimating their emissions. Currently agricultural activities contribute a significant portion (approximately 20%) of global anthropogenic GHG emissions, and agricultural soils have been identified as one of the main GHG source categories within the agricultural sector. However, compared to many other GHG sources, inventory methods for soils are relatively more complex and have been implemented only to varying degrees among member countries. This review summarizes and evaluates the methods used by Annex 1 countries in estimating CO2 and N2O emissions in agricultural soils. While most countries utilize the Intergovernmental Panel on Climate Change (IPCC) default methodology, several Annex 1 countries are developing more advanced methods that are tailored for specific country circumstances. Based on the latest national inventory reporting, about 56% of the Annex 1 countries use IPCC Tier 1 methods, about 26% use Tier 2 methods, and about 18% do not estimate or report N2O emissions from agricultural soils. More than 65% of the countries do not report CO2 emissions from the cultivation of mineral soils, organic soils, or liming, and only a handful of countries have used country-specific, Tier 3 methods. Tier 3 methods usually involve process-based models and detailed, geographically specific activity data. Such methods can provide more robust, accurate estimates of emissions and removals but require greater diligence in documentation, transparency, and uncertainty assessment to ensure comparability between countries. Availability of detailed, spatially explicit activity data is a major constraint to implementing higher tiered methods in many countries.

  2. Global atmospheric emission inventory of polycyclic aromatic hydrocarbons (PAHs) for 2004

    NASA Astrophysics Data System (ADS)

    Zhang, Yanxu; Tao, Shu

    The global atmospheric emissions of the 16 polycyclic aromatic hydrocarbons (PAHs) listed as the US EPA priority pollutants were estimated using reported emission activity and emission factor data for the reference year 2004. A database for emission factors was compiled, and their geometric means and frequency distributions applied for emission calculation and uncertainty analysis, respectively. The results for 37 countries were compared with other PAH emission inventories. It was estimated that the total global atmospheric emission of these 16 PAHs in 2004 was 520 giga grams per year (Gg y -1) with biofuel (56.7%), wildfire (17.0%) and consumer product usage (6.9%) as the major sources, and China (114 Gg y -1), India (90 Gg y -1) and United States (32 Gg y -1) were the top three countries with the highest PAH emissions. The PAH sources in the individual countries varied remarkably. For example, biofuel burning was the dominant PAH source in India, wildfire emissions were the dominant PAH source in Brazil, while consumer products were the major PAH emission source in the United States. In China, in addition to biomass combustion, coke ovens were a significant source of PAHs. Globally, benzo(a)pyrene accounted for 0.05% to 2.08% of the total PAH emission, with developing countries accounting for the higher percentages. The PAH emission density varied dramatically from 0.0013 kg km -2 y in the Falkland Islands to 360 kg km -2 y in Singapore with a global mean value of 3.98 kg km -2 y. The atmospheric emission of PAHs was positively correlated to the country's gross domestic product and negatively correlated with average income. Finally, a linear bivariate regression model was developed to explain the global PAH emission data.

  3. Verifying the UK N_{2}O emission inventory with tall tower measurements

    NASA Astrophysics Data System (ADS)

    Carnell, Ed; Meneguz, Elena; Skiba, Ute; Misselbrook, Tom; Cardenas, Laura; Arnold, Tim; Manning, Alistair; Dragosits, Ulli

    2016-04-01

    Nitrous oxide (N2O) is a key greenhouse gas (GHG), with a global warming potential ˜300 times greater than that of CO2. N2O is emitted from a variety of sources, predominantly from agriculture. Annual UK emission estimates are reported, to comply with government commitments under the United Nations Framework Convention on Climate Change (UNFCCC). The UK N2O inventory follows internationally agreed protocols and emission estimates are derived by applying emission factors to estimates of (anthropogenic) emission sources. This approach is useful for comparing anthropogenic emissions from different countries, but does not capture regional differences and inter-annual variability associated with environmental factors (such as climate and soils) and agricultural management. In recent years, the UK inventory approach has been refined to include regional information into its emissions estimates (e.g. agricultural management data), in an attempt to reduce uncertainty. This study attempts to assess the difference between current published inventory methodology (default IPCC methodology) and a revised approach, which incorporates the latest thinking, using data from recent work. For 2013, emission estimates made using the revised approach were 30 % lower than those made using default IPCC methodology, due to the use of lower emission factors suggested by recent projects (www.ghgplatform.org.uk, Defra projects: AC0116, AC0213 and MinNO). The 2013 emissions estimates were disaggregated on a monthly basis using agricultural management (e.g. sowing dates), climate data and soil properties. The temporally disaggregated emission maps were used as input to the Met Office atmospheric dispersion model NAME, for comparison with measured N2O concentrations, at three observation stations (Tacolneston, E England; Ridge Hill, W England; Mace Head, W Ireland) in the UK DECC network (Deriving Emissions linked to Climate Change). The Mace Head site, situated on the west coast of Ireland, was

  4. High-Resolution Spatially Gridded Biomass Burning Emissions Inventory In Asia

    NASA Astrophysics Data System (ADS)

    Vadrevu, K. P.; Lau, W. K.; da Silva, A.; Justice, C. O.

    2012-12-01

    Biomass burning is long recognized an important source of greenhouse gas (GHG) emissions (CO2, CO, CH4, H2, CH3Cl, NO, HCN, CH3CN, COS, etc) and aerosols. In the Asian region, the current estimates of greenhouse gas emissions and aerosols from biomass burning are severely constrained by the lack of reliable statistics on fire distribution and frequency, and the lack of accurate estimates of area burned, fuel load, etc. As a part of NASA funded interdisciplinary research project entitled "Effects of biomass burning on water cycle and climate in the monsoon Asia", we initially developed a high resolution spatially gridded emissions inventory from the biomass burning for Indo-Ganges region and then extended the inventory to the entire Asia. Active fires from MODIS as well as high resolution LANDSAT data have been used to fine-tune the MODIS burnt area products for estimating the emissions. Locally based emission factors were used to refine the gaseous emissions. The resulting emissions data has been gridded at 5-minute intervals. We also compared our emission estimates with the other emission products such as Global Fire Assimilation System (GFAS), Quick fire emissions database (QFED) and Global Fire Emissions Database (GFED). Our results revealed significant vegetation fires from Myanmar, India, Indonesia, China, Laos, Thailand, Cambodia and Vietnam. These seven countries accounted for 92.4% of all vegetation fires in the Asian region. Satellite-based vegetation fire analysis showed the highest fire occurrence in the closed to open shrub land category, (19%) followed by closed to open, broadleaved evergreen-semi deciduous forest (16%), rain fed croplands (17%), post flooded or irrigated croplands (12%), mosaic cropland vegetation (11%), mosaic vegetation/cropland (10%). Emission contribution from agricultural fires was significant, however, showed discrepancies due to low confidence in burnt areas and lack of crop specific emission factors. Further, our results

  5. Life cycle inventory energy consumption and emissions for biodiesel versus petroleum diesel fueled construction vehicles.

    PubMed

    Pang, Shih-Hao; Frey, H Christopher; Rasdorf, William J

    2009-08-15

    Substitution of soy-based biodiesel fuels for petroleum diesel will alter life cycle emissions for construction vehicles. A life cycle inventory was used to estimate fuel cycle energy consumption and emissions of selected pollutants and greenhouse gases. Real-world measurements using a portable emission measurement system (PEMS) were made forfive backhoes, four front-end loaders, and six motor graders on both fuels from which fuel consumption and tailpipe emission factors of CO, HC, NO(x), and PM were estimated. Life cycle fossil energy reductions are estimated it 9% for B20 and 42% for B100 versus petroleum diesel based on the current national energy mix. Fuel cycle emissions will contribute a larger share of total life cycle emissions as new engines enter the in-use fleet. The average differences in life cycle emissions for B20 versus diesel are: 3.5% higher for NO(x); 11.8% lower for PM, 1.6% higher for HC, and 4.1% lower for CO. Local urban tailpipe emissions are estimated to be 24% lower for HC, 20% lower for CO, 17% lower for PM, and 0.9% lower for NO(x). Thus, there are environmental trade-offs such as for rural vs urban areas. The key sources of uncertainty in the B20 LCI are vehicle emission factors.

  6. Development of a high temporal-spatial resolution vehicle emission inventory based on NRT traffic data and its impact on air pollution in Beijing - Part 1: Development and evaluation of vehicle emission inventory

    NASA Astrophysics Data System (ADS)

    Jing, B. Y.; Wu, L.; Mao, H. J.; Gong, S. L.; He, J. J.; Zou, C.; Song, G. H.; Li, X. Y.; Wu, Z.

    2015-10-01

    As the ownership of vehicles and frequency of utilization increase, vehicle emissions have become an important source of air pollution in Chinese cities. An accurate emission inventory for on-road vehicles is necessary for numerical air quality simulation and the assessment of implementation strategies. This paper presents a bottom-up methodology based on the local emission factors, complemented with the widely used emission factors of Computer Programme to Calculate Emissions from Road Transport (COPERT) model and near real time (NRT) traffic data on road segments to develop a high temporal-spatial resolution vehicle emission inventory (HTSVE) for the urban Beijing area. To simulate real-world vehicle emissions accurately, the road has been divided into segments according to the driving cycle (traffic speed) on this road segment. The results show that the vehicle emissions of NOx, CO, HC and PM were 10.54 × 104, 42.51 × 104 and 2.13 × 104 and 0.41 × 104 Mg, respectively. The vehicle emissions and fuel consumption estimated by the model were compared with the China Vehicle Emission Control Annual Report and fuel sales thereafter. The grid-based emissions were also compared with the vehicular emission inventory developed by the macro-scale approach. This method indicates that the bottom-up approach better estimates the levels and spatial distribution of vehicle emissions than the macro-scale method, which relies on more information. Additionally, the on-road vehicle emission inventory model and control effect assessment system in Beijing, a vehicle emission inventory model, was established based on this study in a companion paper (He et al., 2015).

  7. USER'S GUIDE TO THE PERSONAL COMPUTER VERSION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (PC-BEIS2)

    EPA Science Inventory

    The document is a user's guide for an updated Personal Computer version of the Biogenic Emissions Inventory System (PC-BEIS2), allowing users to estimate hourly emissions of biogenic volatile organic compounds (BVOCs) and soil nitrogen oxide emissions for any county in the contig...

  8. INTEGRATION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (BEIS3) INTO THE COMMUNITY MULTISCALE AIR QUALITY MODELING SYSTEM

    EPA Science Inventory

    The importance of biogenic emissions for regional air quality modeling is generally recognized [Guenther et al., 2000]. Since the 1980s, biogenic emission estimates have been derived from algorithms such as the Biogenic Emissions Inventory System (BEIS) [Pierce et. al., 1998]....

  9. A Comparison of Inventoried and Measured U.S. Urban/Industrial Hg Emission Factors during the NOMADSS Experiment

    NASA Astrophysics Data System (ADS)

    Ambrose, J. L., II; Gratz, L.; Jaffe, D. A.; Apel, E. C.; Campos, T. L.; Flocke, F. M.; Guenther, A. B.; Hornbrook, R. S.; Karl, T.; Kaser, L.; Knapp, D. J.; Weinheimer, A. J.; Cantrell, C. A.; Mauldin, L.; Yuan, B.

    2014-12-01

    We performed an airborne survey of some large anthropogenic mercury (Hg) emission sources in the Southeast U.S. during the 2013 Nitrogen, Oxidants, Mercury and Aerosol Distribution, Sources, and Sinks (NOMADSS) experiment. The observations included speciated atmospheric Hg, and tracers of urban/industrial emissions and associated photochemistry (e.g., carbon monoxide, CO; carbon dioxide, CO2; sulfur dioxide, SO2; nitrogen oxides (NOx); volatile organic compounds, VOCs; ozone, O3; hydroxyl radical, HO·; sulfuric acid, H2SO4) and were made from the National Science Foundation's/National Center for Atmospheric Research's C-130 research aircraft. Mercury was measured using the University of Washington's Detector for Oxidized Hg Species. We derived Hg emission factors (EF) for several U.S. urban areas and large industrial point sources, including coal-fired power plants (CFPPs) in Louisiana, Pennsylvania, Texas, and West Virginia. We compared our measured Hg EFs with inventory-based values from two separate Hg emission inventories provided by the U.S. Environmental Protection Agency - the National Emissions Inventory (NEI) and the Toxics Release Inventory (TRI). We also performed an inter-comparison of the inventory-based Hg EFs. For the CFPPs sampled, we find that actual Hg emissions differed from inventoried values by more than a factor of two in some cases. Measured Hg EFs were weakly correlated with values reported in the NEI: m = 0.71; r2 = 0.47 (p = 0.06; n = 8), whereas EFs derived from the TRI were not meaningfully predictive of the measured values: m = -3.3; r2 = 0.61 (p < 0.05; n = 8). Median absolute differences between measured and inventory-based EFs were ≥50%, relative to the inventory values. The median absolute average difference between the Hg EFs reported in the two inventories was approximately 40%. Our results place quantitative constraints on uncertainties associated with the inventoried Hg emissions. Additionally, our results suggest that the

  10. Evaluating NOx emission inventories for regulatory air quality modeling using satellite and air quality model data

    NASA Astrophysics Data System (ADS)

    Kemball-Cook, Susan; Yarwood, Greg; Johnson, Jeremiah; Dornblaser, Bright; Estes, Mark

    2015-09-01

    The purpose of this study was to assess the accuracy of NOx emissions in the Texas Commission on Environmental Quality's (TCEQ) State Implementation Plan (SIP) modeling inventories of the southeastern U.S. We used retrieved satellite tropospheric NO2 columns from the Ozone Monitoring Instrument (OMI) together with NO2 columns from the Comprehensive Air Quality Model with Extensions (CAMx) to make top-down NOx emissions estimates using the mass balance method. Two different top-down NOx emissions estimates were developed using the KNMI DOMINO v2.0 and NASA SP2 retrievals of OMI NO2 columns. Differences in the top-down NOx emissions estimates made with these two operational products derived from the same OMI radiance data were sufficiently large that they could not be used to constrain the TCEQ NOx emissions in the southeast. The fact that the two available operational NO2 column retrievals give such different top-down NOx emissions results is important because these retrievals are increasingly being used to diagnose air quality problems and to inform efforts to solve them. These results reflect the fact that NO2 column retrievals are a blend of measurements and modeled data and should be used with caution in analyses that will inform policy development. This study illustrates both benefits and challenges of using satellite NO2 data for air quality management applications. Comparison with OMI NO2 columns pointed the way toward improvements in the CAMx simulation of the upper troposphere, but further refinement of both regional air quality models and the NO2 column retrievals is needed before the mass balance and other emission inversion methods can be used to successfully constrain NOx emission inventories used in U.S. regulatory modeling.

  11. Characterization of road freight transportation and its impact on the national emission inventory in China

    NASA Astrophysics Data System (ADS)

    Yang, X. F.; Liu, H.; Man, H. Y.; He, K. B.

    2014-06-01

    Mobile source emission inventories serve as critical input for atmospheric chemical transport models, which are used to simulate air quality and understand the role of mobile source emissions. The significance of mobile sources is even more important in China because the country has the largest vehicle population in the world, and that population continues to grow rapidly. Estimating emissions from diesel trucks is a critical work in mobile source emission inventories due to the importance and difficulties associated with estimating emissions from diesel trucks. Although diesel trucks are major contributors of nitrogen oxide (NOx) and primary particulate matter smaller than 2.5 μm (PM2.5), there are still more obstacles on the existing estimation of diesel truck emissions compared with that of cars; long-range freight transportation activities are complicated, and much of the basic data remain unclear. Most of existing inventories were based on local registration number. However, according to our research, a large number of trucks are conducting long-distance inter-city or inter province transportation. Instead of the local registration number based approach, a road emission intensity-based (REIB) approach is introduced in this research. To provide efficient data for the REIB approach, 1060 questionnaire responses and approximately 1.7 million valid seconds of onboard GPS monitoring data were collected. Both the questionnaire answers and GPS monitoring results indicated that the driving conditions on different types of road have significant impacts on the emission levels of freight trucks. We present estimated emissions of NOx and primary PM2.5 from diesel freight trucks for China in 2011. Using the REIB approach, the activity level and distribution data are obtained from the questionnaire answers. Emission factors are calculated with the International Vehicle Emission (IVE) model that interpolated local on-board measurement results in China according to the GPS

  12. Including indoor offgassed emissions in the life cycle inventories of wood products.

    PubMed

    Chaudhary, Abhishek; Hellweg, Stefanie

    2014-12-16

    Volatile organic compounds (VOCs) that negatively affect human health are emitted from wood products used indoors. However, the existing life cycle inventories of these products only document the emissions occurring during production and disposal phases. Consequently, the life cycle assessment (LCA) of indoor wooden products conducted using these inventories neglect the use-phase impacts from exposure to offgassed VOCs and therefore underestimate the product's total environmental impact. This study demonstrates a methodology to calculate the use phase inventory and the corresponding human health impacts resulting from indoor use of any VOC emitting product. For the five most commonly used types of boards used in indoor wood products, the mass of each VOC emitted into the indoor compartment over their service life was calculated by statistically analyzing data from 50 published chamber testing studies. Uncertainty was assessed using Monte Carlo simulations. The calculated inventory data were used in a case study to calculate and compare the health impacts of five different wooden floorings made of above materials. The results show that the use-phase human-toxicity impacts are an order of magnitude higher than those occurring during the rest of the flooring's life cycle. The factors influencing the offgassing of VOCs from wood products and measures to reduce exposure are discussed.

  13. Including indoor offgassed emissions in the life cycle inventories of wood products.

    PubMed

    Chaudhary, Abhishek; Hellweg, Stefanie

    2014-12-16

    Volatile organic compounds (VOCs) that negatively affect human health are emitted from wood products used indoors. However, the existing life cycle inventories of these products only document the emissions occurring during production and disposal phases. Consequently, the life cycle assessment (LCA) of indoor wooden products conducted using these inventories neglect the use-phase impacts from exposure to offgassed VOCs and therefore underestimate the product's total environmental impact. This study demonstrates a methodology to calculate the use phase inventory and the corresponding human health impacts resulting from indoor use of any VOC emitting product. For the five most commonly used types of boards used in indoor wood products, the mass of each VOC emitted into the indoor compartment over their service life was calculated by statistically analyzing data from 50 published chamber testing studies. Uncertainty was assessed using Monte Carlo simulations. The calculated inventory data were used in a case study to calculate and compare the health impacts of five different wooden floorings made of above materials. The results show that the use-phase human-toxicity impacts are an order of magnitude higher than those occurring during the rest of the flooring's life cycle. The factors influencing the offgassing of VOCs from wood products and measures to reduce exposure are discussed. PMID:25405704

  14. Characterization of road freight transportation and its impact on the national emission inventory in China

    NASA Astrophysics Data System (ADS)

    Yang, X. F.; Liu, H.; Man, H. Y.; He, K. B.

    2015-02-01

    Diesel trucks are major contributors of nitrogen oxides (NOx) and primary particulate matter smaller than 2.5 μm (PM2.5) in the transportation sector. However, there are more obstacles to existing estimations of diesel-truck emissions compared with those of cars. The obstacles include both inappropriate methodology and missing basic data in China. According to our research, a large number of trucks are conducting long-distance intercity or interprovincial transportation. Thus, the method used by most existing inventories, based on local registration number, is inappropriate. A road emission intensity-based (REIB) approach is introduced in this research instead of registration-population-based approach. To provide efficient data for the REIB approach, 1060 questionnaire responses and approximately 1.7 million valid seconds of onboard GPS monitoring data were collected in China. The estimated NOx and PM2.5 emissions from diesel freight trucks in China were 5.0 (4.8-7.2) million tonnes and 0.20 (0.17-0.22) million tonnes, respectively, in 2011. The province-based emission inventory is also established using the REIB approach. It was found that the driving conditions on different types of road have significant impacts on the emission levels of freight trucks. The largest differences among the emission factors (in g km-1) on different roads exceed 70 and 50% for NOx and PM2.5, respectively. A region with more intercity freeways or national roads tends to have more NOx emissions, while urban streets play a more important role in primary PM2.5 emissions from freight trucks. Compared with the inventory of the Ministry of Environment Protection, which allocates emissions according to local truck registration number and neglects interregional long-distance transport trips, the differences for NOx and PM2.5 are +28 and -57%, respectively. The REIB approach matches better with traffic statistical data on a provincial level. Furthermore, the different driving conditions on the

  15. Assessment of Air Pollutants and Greenhouse Gases Emission Over East Asia : A Bottom-up Inventory Perspective

    NASA Astrophysics Data System (ADS)

    Woo, J. H.; Kim, Y.; Lee, Y. M.; Choi, K. C.; Zhang, Q.; Kurokawa, J. I.; Lee, J. B.; Song, C. K.; Kim, S.

    2014-12-01

    Air pollutants (SLCPs) such as tropospheric ozone and aerosols are mainly affected by meteorological variables and emissions. East Asia is one of important source regions of both anthropogenic and natural air pollutants and GHGs. Therefore, significant environmental changes are expected in the future and air quality modeling is the important methodology to quantitatively evaluate them. Multiple emission inventories with various spatio-temporal resolutions are necessary in support of many different air quality modeling and future climate chage researches. Many emission inventories have been developed for Asia and for Globe, such as TRACE-P, INTEX, REAS, CREATE, MICS-Asia, HTAP, SRES, RCP. Those inventories have been successfully used for many international researches, but also have several limitations including relatively old base year, limited number of pollutants/types, and low transparency of sector/fuel information. Understanding discrepancies and similarities among those intentories would give us a better insights to understand not only present status regional emissions amounts but structures of society and policy that link to the future emissions. To understand these, we; 1) selected several base-year bottom-up anthropogenic emission inventories over East Asia, 2) inter-compare emission inventories with more comprehensive sector/fuel classification, 3) explorer emissions change with more updated acvities, emission factors, and control options. The tentative results show that more than 50% of emission amount could be differ by inventory selection and more than 30% of emissions could be changed by emissions factor and/or control options. More findings regarding to these objectives will be presented on site

  16. A Modeling Comparison of Mercury Deposition from Current Anthropogenic Mercury Emission Inventories.

    PubMed

    Simone, Francesco De; Gencarelli, Christian N; Hedgecock, Ian M; Pirrone, Nicola

    2016-05-17

    Human activities have altered the biogeochemical cycle of mercury (Hg) since precolonial times, and anthropogenic activities will continue to perturb the natural cycle of Hg. Current estimates suggest the atmospheric burden is three to five times greater than precolonial times. Hg in the upper ocean is estimated to have doubled over the same period. The Minamata convention seeks to reduce the impact human activities have on Hg releases to the environment. A number of the Articles in the Convention concern the development of detailed inventories for Hg emissions and releases. Using the global Hg chemical transport model, ECHMERIT, the influence of the anthropogenic emission inventory (AMAP/UNEP, EDGAR, STREETS) on global Hg deposition patterns has been investigated. The results suggest that anthropogenic Hg emissions contribute 20-25% to present-day Hg deposition, and roughly two-thirds of primary anthropogenic Hg is deposited to the world's oceans. Anthropogenic Hg deposition is significant in the North Pacific, Mediterranean and Arctic. The results indicate immediate reductions in Hg emissions would produce benefits in the short term, as well as in the long term. The most impacted regions would be suitable to assess changes in Hg deposition resulting from implementation of the Minamata convention. PMID:27120197

  17. [Inventories of atmospheric arsenic emissions from coal combustion in China, 2005].

    PubMed

    Tian, He-Zhong; Qu, Yi-Ping

    2009-04-15

    Anthropogenic arsenic (As) emitted from coal combustion is one of key trace elements leading to negative air pollution and national economy loss. It is of great significance to estimate the atmospheric arsenic emission for proposing relevant laws or regulations and selecting proper pollution control technologies. The inventories of atmospheric arsenic emissions from coal combustion in China were evaluated by adopting the emission factor method based on fuel consumption. Arsenic emission sources were firstly classified into several categories by economic sectors, combustion types and pollution control technologies. Then, according to provincial coal consumption and averaged arsenic concentration in the feed fuel, the inventories of atmospheric arsenic emission from coal combustion in China in 2005 were established. Coal outputand consumption in China in 2005 were 2,119.8 and 2,099.8 Mt, respectively. The total emissions of arsenic released into the atmosphere in 2005 in China were estimated at about 1,564.4 t, and Shandong ranked the largest province with 144.4 t arsenic release, followed by Hunan (141.1 t), Hebei (108.5 t), Henan (77.7 t), and Jiangsu (77.0 t), which were mainly concentrated in the eastern and central provinces of China. The arsenic emissions were largely emitted by industry sector (818.8 t) and thermal power generation sector (303.4 t), contributing 52.3% and 19.4% of the totals, respectively. About 375.5 t arsenic was estimated to be released into the atmosphere in the form of gas phase in China in 2005, with a share of 24% of the totals. In general, arsenic pollution control from coal combustion should be highlighted for the power and industry sectors in the whole country. However, arsenic poisoning caused by residential coal burning should also be paid great attention in some areas such as Xinjiang, Gansu, Qinghai and Guishou.

  18. [Emission inventory of greenhouse gases from agricultural residues combustion: a case study of Jiangsu Province].

    PubMed

    Liu, Li-hua; Jiang, Jing-yan; Zong, Liang-gang

    2011-05-01

    Burning of agricultural crop residues was a major source greenhouse gases. In this study, the proportion of crop straws (rice, wheat, maize, oil rape, cotton and soja) in Jiangsu used as household fuel and direct open burning in different periods (1990-1995, 1996-2000, 2001-2005 and 2006-2008) was estimated through questionnaire. The emission factors of CO2, CO, CH4 and NO20 from the above six types of crop straws were calculated by the simulated burning experiment. Thus the emission inventory of greenhouse gases from crop straws burning was established according to above the burning percentages and emission factors, ratios of dry residues to production and crop productions of different periods in Jiangsu province. Results indicated that emission factors of CO2, CO, CH4 and N2O depended on crop straw type. The emission factors of CO2 and CH4 were higher for oil rape straw than the other straws, while the maize and the rice straw had the higher N2O and CO emission factor. Emission inventory of greenhouse gases from agricultural residues burning in Jiangsu province showed, the annual average global warming potential (GWP) of six tested crop straws were estimated to be 9.18 (rice straw), 4.35 (wheat straw), 2.55 (maize straw), 1.63 (oil rape straw), 0.55 (cotton straw) and 0. 39 (soja straw) Tg CO2 equivalent, respectively. Among the four study periods, the annual average GWP had no obvious difference between the 1990-1995 and 2006-2008 periods, while the maximal annual average GWP (23.83 Tg CO2 equivalent) happened in the 1996-2000 period, and the minimum (20.30 Tg CO2 equivalent) in 1996-2000 period.

  19. International Global Atmospheric Chemistry Programme global emissions inventory activity: Working group on anthropogenic emissions of SO{sub 2} and NO{sub x}, current status

    SciTech Connect

    Benkovitz, C.M.

    1995-07-01

    This report addresses the compilation of global, gridded inventories of anthropogenic emissions of sulfur dioxide and nitrogen oxides for 1985 and sulfur dioxide for 1990. In 1985 version 1 of the global gridded inventories were completed and have been released to the scientific community. Version 1A includes annual emissions. Version 1B includes seasonal emissions by industrial sector and with two vertical levels (above and below 100m). The inventories are distributed to a 1{degree}x1{degree} longitude/latitude grid and include the most current information for the United States, Canada, Europe, Asia, Australia, and South Africa. In addition, a collaborative effort between The Netherlands and Brookhaven National Laboratory is addressing the compilation of an inventory of anthropogenic emissions of sulfur dioxide for 1990.

  20. Emission Inventory of Halogenated greenhouse gases in China during 1980-2050

    NASA Astrophysics Data System (ADS)

    Fang, X.; Velders, G. J. M.; Ravishankara, A. R.; Molina, M.; Su, S.; Zhang, J.; Zhou, X.; Hu, J.; Prinn, R. G.

    2015-12-01

    China is currently the largest producer and consumer of ozone-depleting substances (ODSs) which are regulated by the Montreal Protocol (MP). Many ODSs are also powerful greenhouse gases (GHGs). The Multilateral Fund has subsidized ~1 billion US dollars for the ODS phase out in China, and thus the return on this investment is of great interest. This study gives a comprehensive emission inventory in China from 1980 to 2013 of halocarbons including ODSs and their alternatives, the hydrofluorocarbons (HFCs) that are also greenhouse gases. We then project these emissions up to 2050 according to the MP and several policy options. Total emissions of ODS and HFCs were estimated to be ~500 CO2-eq Tg/yr in 2013 which are equivalent to ~5% of total GHG emissions in China including fossil fuel CO2 emissions. Our estimate shows that China has succeeded in substantially reducing CFC-11-equivalent emissions (to protect the ozone layer), and CO2-equivalent emissions (to protect climate) of ODSs since the mid-1990s when their phase out started in China in compliance with the MP. Furthermore, the avoided CO2-eq emissions due to compliance with the MP are even greater compared to the reduced emissions, for example net cumulative avoided emissions during 19 year period between 1995-2013 are comparable to the current one year CO2 emissions from fossil fuels in China. We find that HFC CO2-eq emissions increased rapidly in last decade, which make up ~2% in 2005 to ~20% of total halocarbon CO2-eq emissions in 2013. Under a baseline scenario in which HFCs are used as alternatives in the ongoing phase out of HCFCs in China, emissions of HFCs are predicted to be important components of both China's and global future GHG emissions. However, potential exists for minimizing China's HFC emissions under mitigation scenarios. Our conclusions about China's past and future ODS and HFC emission trajectories are likely to apply to other developing countries, with important implications for mitigating

  1. A new inventory for two-wheel vehicle emissions in West Africa for 2002

    NASA Astrophysics Data System (ADS)

    Assamoi, Eric-Michel; Liousse, Catherine

    2010-10-01

    Rather surprisingly, urban atmospheric particulate levels in West Africa compare with measured concentrations in Europe and Asia megacities (Liousse, C., Galy-Lacaux, C., Assamoi, E.-M., Ndiaye, A., Diop, B., Cachier, H., Doumbia, T., Gueye, P., Yoboue, V., Lacaux, J.-P., Guinot, B., Guillaume, B., Rosset, R., Castera, P., Gardrat, E., Zouiten, C., Jambert, C., Diouf, A., Koita, O., Baeza, A., Annesi-Maesano, I., Didier, A., Audry, S., Konare, A., 2009. Integrated Focus on West African Cities (Cotonou, Bamako, Dakar, Ouagadougou, Abidjan, Niamey): Emissions, Air Quality and Health Impacts of Gases and Aerosols. Third International AMMA Conference on Predictability of the West African Moosoon Weather, Climate and Impacts. Ouagadougou, Burkina Faso. July 20-24). This pollution mainly derives from road traffic emissions with, in some capitals (e.g. Cotonou), the strong contribution of two-wheel vehicles. Two key questions arise: are presently available emission inventories (e.g. Junker, C., Liousse, C., 2008. A global emission inventory of carbonaceous aerosol from historic records of fossil fuel and biofuel consumption for the period 1860-1997. Atmospheric Chemistry Physics, 8, 1-13; Bond, T.C., Streets, D.G., Yarber, K.F., Nelson, S.M., Woo, J.H., Klimont, Z., 2004. A technology-based global inventory of black and organic carbon emissions from combustion. Journal of Geophysical Research, 1009, D14203, DOI:10.1029/2003JD003697) able to account for these emissions? And, if not, how can we remedy this? The aim of this paper is to develop a methodology to estimate emissions produced by two-wheel vehicles in West Africa for 2002 in a context where reliable information is hardly available. Fuel consumption ratios between two-wheel engines (in this work) and all vehicles issued from UN database ( http://data.un.org/Data.aspx?d=EDATA&f=cmID%3aMO%3btrID%3a1221) are as high as 169%, 264% and 628%, for Burkina Faso, Mali and Chad respectively, indicating that this global

  2. Development of North American emission inventories for air quality modeling under climate change

    SciTech Connect

    Jung-Hun Woo; Shan He; Efthimios Tagaris; Kuo-Jen Liao; Kasemsan Manomaiphiboon; Praveen Amar; Armistead G. Russell

    2008-11-15

    An approach that integrates the impact of both the current regulations and the longer-term national and global trends is developed to construct an emissions inventory (EI) for North America for the mid-century in support of a regional modeling study of ozone and particulate matter (PM) less than or equal to 2.5 {mu}m (PM2.5). Because the time horizon of such a distant projection is beyond that of EIs used in typical modeling studies, it is necessary to identify a practical approach that allows the emission projections to account for emission controls and climatic and energy-use changes. However, a technical challenge arises because this requires integration of various different types of information with which emissions from human activities are associated. The method developed here is based on data availability, spatiotemporal coverage and resolution, and future-scenario consistency (i.e., Intergovernmental Panel on Climate Change Special Report on Emissions Scenarios A1B), and consists of two major steps: (1) near-future EI projection (to the year 2020), and (2) longer-term EI projection (to mid-century). For the United States, the year-2050 emissions for nitrogen oxides (NOx), sulfur dioxide (SO{sub 2}), PM2.5, anthropogenic volatile organic compounds (VOCs), and ammonia are projected to change by 55, 55, 30, 40, and 20%, respectively, compared with 2001. NOx and SO{sub 2} Emission changes are very similar in total amount but different in sectoral contribution. The projected emission trends for Canada and Mexico differ considerably. After taking into account the modeled climate changes, biogenic VOC emission increases from three countries overwhelm the decreases in anthropogenic VOC emissions, leading to a net small increase (2%) in overall VOC emissions. 16 refs., 8 figs., 4 tabs.

  3. A comprehensive global inventory of atmospheric Antimony emissions from anthropogenic activities, 1995-2010.

    PubMed

    Tian, Hezhong; Zhou, JunRui; Zhu, Chuanyong; Zhao, Dan; Gao, Jiajia; Hao, Jiming; He, Mengchang; Liu, Kaiyun; Wang, Kun; Hua, Shenbing

    2014-09-01

    Antimony (Sb) and its compounds are considered as global pollutants due to their health risks and long-range transport characteristics. A comprehensive global inventory of atmospheric antimony emissions from anthropogenic activities during the period of 1995-2010 has been developed with specific estimation methods based on the relevant data available for different continents and countries. Our results indicate that the global antimony emissions have increased to a peak at about 2232 t (t) in 2005 and then declined gradually. Global antimony emissions in 2010 are estimated at about 1904 t (uncertainty of a 95% confidence interval (CI): -30% ∼ 67%), with fuel combustion as the major source category. Asia and Europe account for about 57% and 24%, respectively, of the global total emissions, and China, the United States, and Japan rank as the top three emitting countries. Furthermore, global antimony emissions are distributed into gridded cells with a resolution of 1° × 1°. Regions with high Sb emissions are generally concentrated in the Southeastern Asia and Western Europe, while South Africa, economically developed regions in the eastern U.S., and Mexico are also responsible for the high antimony emission intensity.

  4. Scheduled Civil Aircraft Emission Inventories for 1976 and 1984: Database Development and Analysis

    NASA Technical Reports Server (NTRS)

    Baughcum, Steven L.; Henderson, Stephen C.; Tritz, Terrance G.

    1996-01-01

    This report describes the development of a three-dimensional database of aircraft fuel burn and emissions (fuel burned, NOx, CO, and hydrocarbons) from scheduled commercial aircraft for four months (February, May, August, and November) of 1976 and 1984. Combining this data with earlier published data for 1990 and 1992, trend analyses for fuel burned, NOx, carbon monoxide, and hydrocarbons were calculated for selected regions (global, North America, Europe, North Atlantic, and North Pacific). These emissions inventories are available for use by atmospheric scientists conducting the Atmospheric Effects of Aviation Project (AEAP) modeling studies. Fuel burned and emissions of nitrogen oxides (NOx as NO2), carbon monoxide, and hydrocarbons have been calculated on a 1 degree latitude x 1 degree longitude x 1 kilometer altitude grid and delivered to NASA as electronic files.

  5. High-resolution ammonia emissions inventories in China from 1980-2012

    NASA Astrophysics Data System (ADS)

    Kang, Y.; Liu, M.; Song, Y.; Huang, X.; Yao, H.; Cai, X.; Zhang, H.; Kang, L.; Liu, X.; Yan, X.; He, H.; Shao, M.; Zhu, T.

    2015-10-01

    Ammonia (NH3) can interact in the atmosphere with other trace chemical species, which can lead to detrimental environmental consequences, such as the formation of fine particulates and ultimately global climate change. China is a major agricultural country, and livestock numbers and nitrogen fertilizer use have increased drastically since 1978, following the rapid economic and industrial development experienced by the country. In this study, comprehensive NH3 emissions inventories were compiled for China for 1980-2012. In a previous study, we parameterized emissions factors (EFs) considering ambient temperature, soil acidity, and the method and rate of fertilizer application. In this study, we refined these EFs by adding the effects of wind speed and new data from field experiments of NH3 flux in cropland in northern China. We found that total NH3 emissions in China increased from 5.9 to 11.2 Tg from 1980 to 1996, and then decreased to 9.5 Tg in 2012. The two major contributors were livestock manure and synthetic fertilizer application, which contributed 80-90 % of the total emissions. Emissions from livestock manure rose from 2.87 Tg (1980) to 6.17 Tg (2005), and then decreased to 5.0 Tg (2012); beef cattle were the largest source followed by laying hens and pigs. The remarkable downward trend in livestock emissions that occurred in 2007 was attributed to a decrease in the numbers of various livestock animals, including beef cattle, goats, and sheep. Meanwhile, emissions from synthetic fertilizer ranged from 2.1 Tg (1980) to 4.7 Tg (1996), and then declined to 2.8 Tg (2012). Urea and ammonium bicarbonate (ABC) dominated this category of emissions, and a decline in ABC application led to the decrease in emissions that took place from the mid-1990s onwards. High emissions were concentrated in eastern and southwestern China. Seasonally, peak NH3 emissions occurred in spring and summer. The inventories had a monthly temporal resolution and a spatial resolution of 1000

  6. High-resolution ammonia emissions inventories in China from 1980 to 2012

    NASA Astrophysics Data System (ADS)

    Kang, Yaning; Liu, Mingxu; Song, Yu; Huang, Xin; Yao, Huan; Cai, Xuhui; Zhang, Hongsheng; Kang, Ling; Liu, Xuejun; Yan, Xiaoyuan; He, Hong; Zhang, Qiang; Shao, Min; Zhu, Tong

    2016-02-01

    Ammonia (NH3) can interact in the atmosphere with other trace chemical species, which can lead to detrimental environmental consequences, such as the formation of fine particulates and ultimately global climate change. China is a major agricultural country, and livestock numbers and nitrogen fertilizer use have increased drastically since 1978, following the rapid economic and industrial development experienced by the country. In this study, comprehensive NH3 emissions inventories were compiled for China for 1980-2012. In a previous study, we parameterized emissions factors (EFs) considering ambient temperature, soil acidity, and the method and rate of fertilizer application. In this study, we refined these EFs by adding the effects of wind speed and new data from field experiments of NH3 flux in cropland in northern China. We found that total NH3 emissions in China increased from 5.9 to 11.1 Tg from 1980 to 1996, and then decreased to 9.7 Tg in 2012. The two major contributors were livestock manure and synthetic fertilizer application, which contributed 80-90 % of the total emissions. Emissions from livestock manure rose from 2.86 Tg (1980) to 6.16 Tg (2005), and then decreased to 5.0 Tg (2012); beef cattle were the largest source followed by laying hens and pigs. The remarkable downward trend in livestock emissions that occurred in 2007 was attributed to a decrease in the numbers of various livestock animals, including beef cattle, goats, and sheep. Meanwhile, emissions from synthetic fertilizer ranged from 2.1 Tg (1980) to 4.7 Tg (1996), and then declined to 2.8 Tg (2012). Urea and ammonium bicarbonate (ABC) dominated this category of emissions, and a decline in ABC application led to the decrease in emissions that took place from the mid-1990s onwards. High emissions were concentrated in eastern and southwestern China. Seasonally, peak NH3 emissions occurred in spring and summer. The inventories had a monthly temporal resolution and a spatial resolution of 1000

  7. GHG and black carbon emission inventories from Mezquital Valley: The main energy provider for Mexico Megacity.

    PubMed

    Montelongo-Reyes, M M; Otazo-Sánchez, E M; Romo-Gómez, C; Gordillo-Martínez, A J; Galindo-Castillo, E

    2015-09-15

    The greenhouse gases and black carbon emission inventory from IPCC key category Energy was accomplished for the Mezquital Valley, one of the most polluted regions in Mexico, as the Mexico City wastewater have been continuously used in agricultural irrigation for more than a hundred years. In addition, thermoelectric, refinery, cement and chemistry industries are concentrated in the southern part of the valley, near Mexico City. Several studies have reported air, soil, and water pollution data and its main sources for the region. Paradoxically, these sources contaminate the valley, but boosted its economic development. Nevertheless, no research has been done concerning GHG emissions, or climate change assessment. This paper reports inventories performed by the 1996 IPCC methodology for the baseline year 2005. Fuel consumption data were derived from priority sectors such as electricity generation, refineries, manufacturing & cement industries, transportation, and residential use. The total CO2 emission result was 13,894.9 Gg, which constituted three-quarters of Hidalgo statewide energy category. The principal CO2 sources were energy transformation (69%) and manufacturing (19%). Total black carbon emissions were estimated by a bottom-up method at 0.66 Gg. The principal contributor was on-road transportation (37%), followed by firewood residential consumption (26%) and cocked brick manufactures (22%). Non-CO2 gas emissions were also significant, particularly SO2 (255.9 Gg), which accounts for 80% of the whole Hidalgo State emissions. Results demonstrated the negative environmental impact on Mezquital Valley, caused by its role as a Megacity secondary fuel and electricity provider, as well as by the presence of several cement industries. PMID:25981943

  8. GHG and black carbon emission inventories from Mezquital Valley: The main energy provider for Mexico Megacity.

    PubMed

    Montelongo-Reyes, M M; Otazo-Sánchez, E M; Romo-Gómez, C; Gordillo-Martínez, A J; Galindo-Castillo, E

    2015-09-15

    The greenhouse gases and black carbon emission inventory from IPCC key category Energy was accomplished for the Mezquital Valley, one of the most polluted regions in Mexico, as the Mexico City wastewater have been continuously used in agricultural irrigation for more than a hundred years. In addition, thermoelectric, refinery, cement and chemistry industries are concentrated in the southern part of the valley, near Mexico City. Several studies have reported air, soil, and water pollution data and its main sources for the region. Paradoxically, these sources contaminate the valley, but boosted its economic development. Nevertheless, no research has been done concerning GHG emissions, or climate change assessment. This paper reports inventories performed by the 1996 IPCC methodology for the baseline year 2005. Fuel consumption data were derived from priority sectors such as electricity generation, refineries, manufacturing & cement industries, transportation, and residential use. The total CO2 emission result was 13,894.9 Gg, which constituted three-quarters of Hidalgo statewide energy category. The principal CO2 sources were energy transformation (69%) and manufacturing (19%). Total black carbon emissions were estimated by a bottom-up method at 0.66 Gg. The principal contributor was on-road transportation (37%), followed by firewood residential consumption (26%) and cocked brick manufactures (22%). Non-CO2 gas emissions were also significant, particularly SO2 (255.9 Gg), which accounts for 80% of the whole Hidalgo State emissions. Results demonstrated the negative environmental impact on Mezquital Valley, caused by its role as a Megacity secondary fuel and electricity provider, as well as by the presence of several cement industries.

  9. VOC species and emission inventory from vehicles and their SOA formation potentials estimation in Shanghai, China

    NASA Astrophysics Data System (ADS)

    Huang, C.; Wang, H. L.; Li, L.; Wang, Q.; Lu, Q.; de Gouw, J. A.; Zhou, M.; Jing, S. A.; Lu, J.; Chen, C. H.

    2015-03-01

    VOC species from vehicle exhaust and gas evaporation were investigated by chassis dynamometer and on-road measurements of 9 gasoline vehicles, 7 diesel vehicles, 5 motorcycles, and 4 gas evaporation samples. The SOA mass yields of gasoline, diesel, motorcycle exhausts, and gas evaporation were calculated based on the mixing ratio of individual VOC species. The SOA mass yields of gasoline and motorcycle exhaust were similar to the results of the published smog chamber study with the exception of that of diesel exhaust was 20% lower than experimental data (Gordon et al., 2013, 2014a, b). This suggests the requirement for further research on SVOC or LVOC emissions. A vehicular emission inventory was compiled based on a local survey of vehicle mileage traveled and real-world measurements of vehicle emission factors. The inventory-based vehicular initial emission ratio of OA to CO was 15.6 μg m-3 ppmv-1. The OA production rate reached 22.3 and 42.7 μg m-3 ppmv-1 under high-NOx and low-NOx conditions, respectively. To determine the vehicular contribution to OA pollution, the inventory-based OA formation ratios for vehicles were calculated with a photochemical-age-based parameterization method and compared with the observation-based OA formation ratios in the urban atmosphere of Shanghai. The results indicated that VOC emissions from vehicle exhaust and gas evaporation only explained 15 and 22% of the total organic aerosols observed in summer and winter, respectively. SOA production only accounted for 25 and 18% of the total vehicular OA formation in summer and winter. VOC emissions from gasoline vehicles contribute 21-38% of vehicular OA formation after 6-24 h of photochemical aging. The results suggest that vehicle emissions are an important contributor to OA pollution in the urban atmosphere of Shanghai. However, a large number of OA mass in the atmosphere still cannot be explained in this study. SOA formation contributions from other sources (e.g. coal burning

  10. High-resolution inventory of ammonia emissions from agricultural fertilizer in China from 1978 to 2008

    NASA Astrophysics Data System (ADS)

    Xu, P.; Liao, Y. J.; Lin, Y. H.; Zhao, C. X.; Yan, C. H.; Cao, M. N.; Wang, G. S.; Luan, S. J.

    2016-02-01

    The quantification of ammonia (NH3) emissions is essential to the more accurate quantification of atmospheric nitrogen deposition, improved air quality and the assessment of ammonia-related agricultural policy and climate mitigation strategies. The quantity, geographic distribution and historical trends of these emissions remain largely uncertain. In this paper, a new Chinese agricultural fertilizer NH3 (CAF_NH3) emissions inventory has been compiled that exhibits the following improvements: (1) a 1 × 1 km gridded map on the county level was developed for 2008; (2) a combined bottom-up and top-down method was used for the local correction of emission factors (EFs) and parameters; (3) the temporal patterns of historical time trends for 1978-2008 were estimated and the uncertainties were quantified for the inventories; and (4) a sensitivity test was performed in which a province-level disaggregated map was compared with CAF_NH3 emissions for 2008. The total CAF_NH3 emissions for 2008 were 8.4 TgNH3 yr-1 (a 6.6-9.8 Tg interquartile range). From 1978 to 2008, annual NH3 emissions fluctuated with three peaks (1987, 1996 and 2005), and total emissions increased from 3.2 to 8.4 Tg at an annual rate of 3.0 %. During the study period, the contribution of livestock manure spreading increased from 37.0 to 45.5 % because of changing fertilization practices and the rapid increase in egg, milk, and meat consumption. The average contribution of synthetic fertilizer, which has a positive effect on crop yields, was approximately 38.3 % (minimum: 33.4 %; maximum: 42.7 %). With rapid urbanization causing a decline in the rural population, the contribution of the rural excrement sector varied widely between 20.3 % and 8.5 %. The average contributions of cake fertilizer and straw returning were approximately 3.8 and 4.5 %, respectively, thus small and stable. Collectively, the CAF_NH3 emissions reflect the nation's agricultural policy to a certain extent. An effective approach to

  11. Toward observationally constrained high space and time resolution CO2 urban emission inventories

    NASA Astrophysics Data System (ADS)

    Maness, H.; Teige, V. E.; Wooldridge, P. J.; Weichsel, K.; Holstius, D.; Hooker, A.; Fung, I. Y.; Cohen, R. C.

    2013-12-01

    The spatial patterns of greenhouse gas (GHG) emission and sequestration are currently studied primarily by sensor networks and modeling tools that were designed for global and continental scale investigations of sources and sinks. In urban contexts, by design, there has been very limited investment in observing infrastructure, making it difficult to demonstrate that we have an accurate understanding of the mechanism of emissions or the ability to track processes causing changes in those emissions. Over the last few years, our team has built a new high-resolution observing instrument to address urban CO2 emissions, the BErkeley Atmospheric CO2 Observing Network (BEACON). The 20-node network is constructed on a roughly 2 km grid, permitting direct characterization of the internal structure of emissions within the San Francisco East Bay. Here we present a first assessment of BEACON's promise for evaluating the effectiveness of current and upcoming local emissions policy. Within the next several years, a variety of locally important changes are anticipated--including widespread electrification of the motor vehicle fleet and implementation of a new power standard for ships at the port of Oakland. We describe BEACON's expected performance for detecting these changes, based on results from regional forward modeling driven by a suite of projected inventories. We will further describe the network's current change detection capabilities by focusing on known high temporal frequency changes that have already occurred; examples include a week of significant freeway traffic congestion following the temporary shutdown of the local commuter rail (the Bay Area Rapid Transit system).

  12. Development and Evaluation of the Biogenic Emissions Inventory System (BEIS) Model v3.5

    NASA Astrophysics Data System (ADS)

    Bash, J. O.; Baker, K. R.; Pouliot, G.

    2014-12-01

    Atmospheric biogenic volatile organic compounds (BVOC) influences ozone and organic aerosol formation and can enhance the impact that anthropogenic pollutants have on ambient air-quality and climate. BVOC emissions are estimated to be approximately an order of magnitude higher than anthropogenic sources of volatile organic compounds. Despite the importance of BVOC emissions on air-quality and climate, considerable uncertainty remains in the parametrization emission algorithms and emission factors from different land uses and vegetation species. We will present three updates to the the BEIS model. (1) The BEIS canopy model has been updated with explicit estimates of leaf temperature coupled to the driving meteorological model's energy balance implemented in. (2) The Biogenic Emission Landuse Database (BELD) was updated with year specific satellite derrived land use, U.S. Department of Agriculture (USDA) crop survey data, and U.S. Forest Service forest Forest Inventory Analyssis (FIA) survayed tree speceis to develop a tree species specific land use data set. (3) A survey of published flux measurements were used to update the BEIS BVOC normalized emission factors. Incremental updates to the BEIS model are evaluated against surface and aircraft based field campain measurements and network observations in Community Multiscale Air Quality (CMAQ) model v5.0.2 simulations. Prelimilar model simulations result in improvements in model O3, isoprene, oxidized nitrogen, and aerosol performance over the contenental U.S.

  13. A self-consistent global emissions inventory spanning 1850-2050 – why we need one and why we do not have one

    EPA Science Inventory

    While emissions inventory development has advanced significantly in recent years, the scientific community still lacks a global inventory utilizing consistent estimation approaches spanning multiple centuries. In this analysis, we investigate the strengths and weaknesses of cur...

  14. Emission Inventories for Ocean-Going Vessels Using Category 3 Propulsion Engines in or Near the United States; Technical Support Document

    EPA Science Inventory

    This report describes the development of emission inventories for ocean-going vessels using Category 3 propulsion engines within the U.S. Exclusive Economic Zone. Inventories are presented for the 2002, 2020, and 2030 calendar years.

  15. Emission inventories of NOx from commercial energy consumption in China, 1995-1998.

    PubMed

    Hao, Jiming; Tian, Hezhong; Lu, Yongqi

    2002-02-15

    Emissions of nitrogen oxides (NOx) in China are of great concern because of their impact on local air pollution as well as on regional environmental risks such as acid rain, eutrophication, tropospheric ozone, fine particulate matter, and loss of biodiversity. In this paper, total anthropogenic emissions of NOx in China during the past two decades are estimated on the basis of commercial energy consumption and NOx emission factors of different sectors and fuel types. Specifically, emission inventories of NOx from 31 provinces, 7 economic sectors, and 11 fuel types from 1995 to 1998 are evaluated and analyzed in detail, and the distribution of provincial-based average NOx emission intensity in 1998 is presented. It can be seen that the calculated national total emissions of NOx have rapidly increased from 4.76 Mt in 1980 to a peak value of about 12.03 Mt in 1996, with an average annual growth rate of 6%. However, instead of increasing, NOx emissions in 1997 and 1998 decreased by 0.37 Mt and 0.85 Mt, respectively, as compared to the peak in 1996. In short, NOx emissions caused by energy use are mainly concentrated in the more populated and industrialized areas of China, i.e., the Eastern Central and Southeastern areas. These results imply that China's NOx emissions in the future may not become as high as previously expected which will be helpful for policy making to control local NOx pollution as well as to reduce acid rain and tropospheric ozone in East Asia.

  16. Beyond the Inventory: An Interagency Collaboration to Reduce Greenhouse Gas Emissions in the Greater Yellowstone Area

    SciTech Connect

    Kandt, A.; Hotchkiss, E.; Fiebig, M.

    2010-10-01

    As one of the largest, intact ecosystems in the continental United States, land managers within the Greater Yellowstone Area (GYA) have recognized the importance of compiling and understanding agency greenhouse gas (GHG) emissions. The 10 Federal units within the GYA have taken an active role in compiling GHG inventories on a unit- and ecosystem-wide level, setting goals for GHG mitigation, and identifying mitigation strategies for achieving those goals. This paper details the processes, methodologies, challenges, solutions, and lessons learned by the 10 Federal units within the GYA throughout this ongoing effort.

  17. A combined approach for the evaluation of a volatile organic compound emissions inventory.

    PubMed

    Choi, Yu-Jin; Calabrese, Richard V; Ehrman, Sheryl H; Dickerson, Russell R; Stehr, Jeffrey W

    2006-02-01

    Emissions inventories significantly affect photochemical air quality model performance and the development of effective control strategies. However, there have been very few studies to evaluate their accuracy. Here, to evaluate a volatile organic compound (VOC) emissions inventory, we implemented a combined approach: comparing the ratios of carbon bond (CB)-IV VOC groups to nitrogen oxides (NOx) or carbon monoxide (CO) using an emission preprocessing model, comparing the ratios of VOC source contributions from a source apportionment technique to NOx or CO, and comparing ratios of CB-IV VOC groups to NOx or CO and the absolute concentrations of CB-IV VOC groups using an air quality model, with the corresponding ratios and concentrations observed at three sites (Maryland, Washington, DC, and New Jersey). The comparisons of the ethene/NOx ratio, the xylene group (XYL)/NOx ratio, and ethene and XYL concentrations between estimates and measurements showed some differences, depending on the comparison approach, at the Maryland and Washington, DC sites. On the other hand, consistent results at the New Jersey site were observed, implying a possible overestimation of vehicle exhaust. However, in the case of the toluene group (TOL), which is emitted mainly from surface coating and printing sources in the solvent utilization category, the ratios of TOL/ NOx or CO, as well as the absolute concentrations revealed an overestimate of these solvent sources by a factor of 1.5 to 3 at all three sites. In addition, the overestimate of these solvent sources agreed with the comparisons of surface coating and printing source contributions relative to NOx from a source apportionment technique to the corresponding value of estimates at the Maryland site. Other studies have also suggested an overestimate of solvent sources, implying a possibility of inaccurate emission factors in estimating VOC emissions from surface coating and printing sources. We tested the impact of these overestimates

  18. VOC species and emission inventory from vehicles and their SOA formation potentials estimation in Shanghai, China

    NASA Astrophysics Data System (ADS)

    Huang, C.; Wang, H. L.; Li, L.; Wang, Q.; Lu, Q.; de Gouw, J. A.; Zhou, M.; Jing, S. A.; Lu, J.; Chen, C. H.

    2015-10-01

    Volatile organic compound (VOC) species from vehicle exhausts and gas evaporation were investigated by chassis dynamometer and on-road measurements of nine gasoline vehicles, seven diesel vehicles, five motorcycles, and four gas evaporation samples. The secondary organic aerosol (SOA) mass yields of gasoline, diesel, motorcycle exhausts, and gas evaporation were estimated based on the mixing ratio of measured C2-C12 VOC species and inferred carbon number distributions. High aromatic contents were measured in gasoline exhausts and contributed comparatively more SOA yield. A vehicular emission inventory was compiled based on a local survey of on-road traffic in Shanghai and real-world measurements of vehicle emission factors from previous studies in the cities of China. The inventory-based vehicular organic aerosol (OA) productions to total CO emissions were compared with the observed OA to CO concentrations (ΔOA / ΔCO) in the urban atmosphere. The results indicate that vehicles dominate the primary organic aerosol (POA) emissions and OA production, which contributed about 40 and 60 % of OA mass in the urban atmosphere of Shanghai. Diesel vehicles, which accounted for less than 20 % of vehicle kilometers of travel (VKT), contribute more than 90 % of vehicular POA emissions and 80-90 % of OA mass derived by vehicles in urban Shanghai. Gasoline exhaust could be an important source of SOA formation. Tightening the limit of aromatic content in gasoline fuel will be helpful to reduce its SOA contribution. Intermediate-volatile organic compounds (IVOCs) in vehicle exhausts greatly contribute to SOA formation in the urban atmosphere of China. However, more experiments need to be conducted to determine the contributions of IVOCs to OA pollution in China.

  19. Comparison of global inventories of CO2 emissions from biomass burning during 2002-2011 derived from multiple satellite products.

    PubMed

    Shi, Yusheng; Matsunaga, Tsuneo; Saito, Makoto; Yamaguchi, Yasushi; Chen, Xuehong

    2015-11-01

    This study compared five widely used globally gridded biomass burning emissions inventories for the 2002-2011 period (Global Fire Emissions Database 3 (GFED3), Global Fire Emissions Database 4 (GFED4), Global Fire Assimilation System 1.0 (GFAS1.0), Fire INventory from NCAR 1.0 (FINN1.0) and Global Inventory for Chemistry-Climate studies-GFED4 (G-G)). Average annual CO2 emissions range from 6521.3 to 9661.5 Tg year(-1) for five inventories, with extensive amounts in Africa, South America and Southeast Asia. Coefficient of Variation for Southern America, Northern and Southern Africa are 30%, 39% and 48%. Globally, the majority of CO2 emissions are released from savanna burnings, followed by forest and cropland burnings. The largest differences among the five inventories are mainly attributable to the overestimation of CO2 emissions by FINN1.0 in Southeast Asia savanna and cropland burning, and underestimation in Southern Africa savanna and Amazon forest burning. The overestimation in Africa by G-G also contributes to the differences.

  20. Top-down estimate of anthropogenic emission inventories and their interannual variability in Houston using a mesoscale inverse modeling technique

    SciTech Connect

    Brioude, J.; Kim, S. W.; Angevine, Wayne M.; Frost, G. J.; Lee, S. H.; McKeen, S. A.; Trainer, Michael; Fehsenfeld, Fred C.; Holloway, J. S.; Ryerson, T. B.; Williams, E. J.; Petron, Gabrielle; Fast, Jerome D.

    2011-10-31

    The 2000 and 2006 Texas Air Quality Study (TexAQS 2000 and 2006) field campaigns took place in eastern Texas in August-October of 2000 and 2006. Several flights of the National Oceanic and Atmospheric Administration (NOAA) and National Center for Atmospheric Research (NCAR) research aircraft were dedicated to characterizing anthropogenic emissions over Houston. Houston is known for having serious problems with non-attainment of air quality standards. We present a method that uses three models and aircraft observations to assess and improve existing emission inventories using an inverse modeling technique. We used 3-dimensional and 4-dimensional variational (3D-VAR and 4D-VAR) inverse modeling techniques based on a least-squares method to improve the spatial and temporal distribution of CO, NOy (sum of all reactive nitrogen compounds), and SO2 emissions predicted by the 4-km-resolution U.S. Environmental Protection Agency (EPA) National Emission Inventory (NEI) for 2005. Differences between the prior and posterior inventories are discussed in detail. We found that in 2006 the prior daytime emissions in the urban area of Houston have to be reduced by 40% {+-} 12% for CO and 7% {+-} 13% for NOy. Over the Houston Ship Channel, where industrial emissions are predominant, the prior emissions have to be reduced by 41% {+-} 15% for CO and 51% {+-} 9% for NOy. Major ports around Houston have their NOy emissions reduced as well, probably due to uncertainties in near-shore ship emissions in the EPA NEI inventory. Using the measurements from the two field campaigns, we assessed the interannual emission variability between 2000 and 2006. Daytime CO emissions from the Houston urban area have been reduced by 8% {+-} 20%, while the NOy emissions have increased by 20% {+-} 12% from 2000 to 2006. In the Houston Ship Channel, the daytime NOy emissions have increased by 13% {+-} 17%. Our results show qualitative consistencies with known changes in Houston emissions sources.

  1. Greenhouse gases emissions from waste management practices using Life Cycle Inventory model.

    PubMed

    Chen, Tsao-Chou; Lin, Cheng-Fang

    2008-06-30

    When exploring the correlation between municipal solid waste management and green house gas emission, the volume and physical composition of the waste matter must be taken into account. Due to differences in local environments and lifestyles the quantity and composition of waste often vary. This leads to differences in waste treatment methods and causes different volumes of greenhouse gases (GHGs), highlighting the need for local research. In this study the Life Cycle Inventory method was used with global warming indicator GHGs as the variables. By quantifying the data and adopting a region-based approach, this created a model of household MSWM in Taipei City, a metropolitan region in Taiwan. To allow analysis and comparison a compensatory system was then added to expand the system boundary. The results of the analysis indicated that out of all the solid waste management sub-models for a function unit, recycling was the most effective method for reducing GHG emissions while using kitchen food waste as swine feeding resulted in the most GHG emissions. As for the impact of waste collection vehicles on emissions, if the efficiency of transportation could be improved and energy consumption reduced, this will help solid waste management to achieve its goal of reducing GHG emissions.

  2. Emission inventories for ships in the arctic based on satellite sampled AIS data

    NASA Astrophysics Data System (ADS)

    Winther, Morten; Christensen, Jesper H.; Plejdrup, Marlene S.; Ravn, Erik S.; Eriksson, Ómar F.; Kristensen, Hans Otto

    2014-07-01

    This paper presents a detailed BC, NOx and SO2 emission inventory for ships in the Arctic in 2012 based on satellite AIS data, ship engine power functions and technology stratified emission factors. Emission projections are presented for the years 2020, 2030 and 2050. Furthermore, the BC, SO2 and O3 concentrations and the deposition of BC are calculated for 2012 and for two arctic shipping scenarios - with or without arctic diversion routes due to a possible polar sea ice extent in the future. In 2012, the largest shares of Arctic ships emissions are calculated for fishing ships (45% for BC, 38% for NOx, 23% for SO2) followed by passenger ships (20%, 17%, 25%), tankers (9%, 13%, 15%), general cargo (8%, 11%, 12%) and container ships (5%, 7%, 8%). In 2050, without arctic diversion routes, the total emissions of BC, NOx and SO2 are expected to change by +16%, -32% and -63%, respectively, compared to 2012. The results for fishing ships are the least certain, caused by a less precise engine power - sailing speed relation. The calculated BC, SO2, and O3 surface concentrations and BC deposition contributions from ships are low as a mean for the whole Arctic in 2012, but locally BC additional contributions reach up to 20% around Iceland, and high additional contributions (100-300%) are calculated in some sea areas for SO2. In 2050, the arctic diversion routes highly influence the calculated surface concentrations and the deposition of BC in the Arctic. During summertime navigation contributions become very visible for BC (>80%) and SO2 (>1000%) along the arctic diversion routes, while the O3 (>10%) and BC deposition (>5%) additional contributions, respectively, get highest over the ocean east of Greenland and in the High Arctic. The geospatial ship type specific emission results presented in this paper have increased the accuracy of the emission inventories for ships in the Arctic. The methodology can be used to estimate shipping emissions in other regions of the world

  3. Mercury Emission Inventory Analysis in Wisconsin using Inverse Modeling and Meso-scale Particle Trajectories

    NASA Astrophysics Data System (ADS)

    de Foy, B.; Schauer, J. J.

    2011-12-01

    Speciated measurements of mercury concentrations were performed at a rural and urban site in Wisconsin for year-long time periods with an hourly time resolution. These are used to evaluate existing emission inventories with an inverse method based on hourly back-trajectories. WRF-Flexpart reverse particle trajectories are calculated at the local to regional scale for every data point in the time series. In addition, we perform forward Eulerian simulations of biomass burning impacts at the receptor site. A least-squares inversion on both the forward impacts and the gridded back-trajectories is used to identify potential source locations and emission factors. Error analysis is performed using bootstrapping on the input grids and time series. Results suggest a combination of impacts from local, regional and biomass burning sources.

  4. Analysis of the Emission Inventories and Model-Ready Emission Datasets of Europe and North America for Phase 2 of the AQMEII Project

    EPA Science Inventory

    This paper highlights the development of the emission inventories and emission processing for Europe (EU) and North America (NA) in the second phase of the Air Quality Model Evaluation International Initiative (AQMEII) project. The main purpose of the second phase of the AQMEII...

  5. Establishment of a high-resolution emission inventory and its impact assessment on air quality modeling in Jiangsu Province, China

    NASA Astrophysics Data System (ADS)

    Zhou, Y.; Zhao, Y.

    2015-12-01

    A high-resolution emission inventory of Jiangsu Province was developed for 2012, using the bottom-up method with the best available domestic emission factors and activity data incorporated. Information of over 6,000 point sources including geographical location, fuel type, burner type and removal efficiency were investigated from various available data sources. The point sources were estimated to account for 83.9%, 71.2%, 63.7% and 54.5% of the total SO2, NOx, PM2.5 and VOCs emissions respectively. Improvement of this provincial emission inventory was assessed by comparisons with emission estimation at national level. For SO2 from power plants, NOx from transportation and PM2.5 from industry, correlation coefficients were 0.703, 0.814 and 0.335, indicated other than power plants and transportation, there was an improvement in estimation of small industrial pollution sources which were usually estimated as area sources in national emission inventory. Correlation analysis of NOx emission and tropospheric NO2 vertical column density measured by Ozone Monitoring Instrument (OMI) were also conducted. The correlation coefficient rose from 0.52 to 0.57 after revisions on geographical locations of 20 large point sources. Such result indicated the local source information from Environmental Statistics should be carefully examined before it can be applied for emission inventory development. In order to assess the improvement in spatial distribution and emission estimation on air quality modeling, the provincial and national emission inventory were input to Community Multi-scale Air Quality Model (CMAQ) simulations. Simulations performed better when emissions were updated from Multi-resolution Emission Inventory for China (MEIC) to provincial inventory, indicating the necessity of improved spatial and temporal distribution of emissions on air quality modeling, especially for gaseous pollutants. For SO2, the normalized mean bias (NMB) and normalized mean error (NME) decreased

  6. International Assistance for Low-Emission Development Planning: Coordinated Low Emissions Assistance Network (CLEAN) Inventory of Activities and Tools--Preliminary Trends

    SciTech Connect

    Cox, S.; Benioff, R.

    2011-05-01

    The Coordinated Low Emissions Assistance Network (CLEAN) is a voluntary network of international practitioners supporting low-emission planning in developing countries. The network seeks to improve quality of support through sharing project information, tools, best practices and lessons, and by fostering harmonized assistance. CLEAN has developed an inventory to track and analyze international technical support and tools for low-carbon planning activities in developing countries. This paper presents a preliminary analysis of the inventory to help identify trends in assistance activities and tools available to support developing countries with low-emission planning.

  7. Simulating aerosols over Arabian Peninsula with CHIMERE: Sensitivity to soil, surface parameters and anthropogenic emission inventories

    NASA Astrophysics Data System (ADS)

    Beegum, S. Naseema; Gherboudj, Imen; Chaouch, Naira; Couvidat, Florian; Menut, Laurent; Ghedira, Hosni

    2016-03-01

    A three dimensional chemistry transport model, CHIMERE, was used to simulate the aerosol optical depths (AOD) over the Arabian Peninsula desert with an offline coupling of Weather Research and Forecasting (WRF) model. The simulations were undertaken with: (i) different horizontal and vertical configurations, (ii) new datasets derived for soil/surface properties, and (iii) EDGAR-HTAP anthropogenic emissions inventories. The model performance evaluations were assessed: (i) qualitatively using MODIS (Moderate-Resolution Imaging Spectroradiometer) deep blue (DB) AOD data for the two local dust events of August 6th and 23rd (2013), and (ii) quantitatively using AERONET (Aerosol Robotic Network) AOD observations, CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) aerosol extinction profiles, and AOD simulations from various forecast models. The model results were observed to be highly sensitive to erodibility and aerodynamic surface roughness length. The use of new datasets on soil erodibility, derived from the MODIS reflectance, and aerodynamic surface roughness length (z0), derived from the ERA-Interim datasets, significantly improved the simulation results. Simulations with the global EDGAR-HTAP anthropogenic emission inventories brought the simulated AOD values closer to the observations. Performance testing of the adapted model for the Arabian Peninsula domain with improved datasets showed good agreement between AERONET AOD measurements and CHIMERE simulations, where the correlation coefficient (R) is 0.6. Higher values of the correlation coefficients and slopes were observed for the dusty periods compared to the non-dusty periods.

  8. Inventory and treatment of compost maturation emissions in a municipal solid waste treatment facility.

    PubMed

    Dorado, Antonio D; Husni, Shafik; Pascual, Guillem; Puigdellivol, Carles; Gabriel, David

    2014-02-01

    Emissions of volatile organic compounds (VOCs) from the compost maturation building in a municipal solid waste treatment facility were inventoried by solid phase microextraction and gas chromatography-mass spectrometry. A large diversity of chemical classes and compounds were found. The highest concentrations were found for n-butanol, methyl ethyl ketone and limonene (ppmv level). Also, a range of compounds exceeded their odor threshold evidencing that treatment was needed. Performance of a chemical scrubber followed by two parallel biofilters packed with an advanced packing material and treating an average airflow of 99,300 m(3) h(-1) was assessed in the treatment of the VOCs inventoried. Performance of the odor abatement system was evaluated in terms of removal efficiency by comparing inlet and outlet abundances. Outlet concentrations of selected VOCs permitted to identify critical odorants emitted to the atmosphere. In particular, limonene was found as the most critical VOC in the present study. Only six compounds from the odorant group were removed with efficiencies higher than 90%. Low removal efficiencies were found for most of the compounds present in the emission showing a significant relation with their chemical properties (functionality and solubility) and operational parameters (temperature, pH and inlet concentration). Interestingly, benzaldehyde and benzyl alcohol were found to be produced in the treatment system.

  9. A laboratory study of agricultural crop residue combustion in China: Emission factors and emission inventory

    NASA Astrophysics Data System (ADS)

    Zhang, Hefeng; Ye, Xingnan; Cheng, Tiantao; Chen, Jianmin; Yang, Xin; Wang, Lin; Zhang, Renyi

    The burning of agricultural crop residue represents a major source of trace gases (CO, CO 2, NO, NO 2, and NO x) and particulate matter on a regional and global scale. This study investigates the gaseous and particulate emissions from the burning of rice, wheat and corn straws, which are three major agricultural crop residues in China, using a self-built burning stove and an aerosol chamber. Emission factors of CO 2, CO, NO, NO 2 and NO x were measured to be 791.3, 64.2, 1.02, 0.79 and 1.81 g kg -1 for rice straw, 1557.9, 141.2, 0.79, 0.32 and 1.12 g kg -1 for wheat straw, and 1261.5, 114.7, 0.85, 0.43 and 1.28 g kg -1 for corn straw, respectively. The corresponding emission factors of particle number are 1.8 × 10 13, 1.0 × 10 13, and 1.7 × 10 13 particles kg -1, respectively. The total emissions of CO, CO 2, and NO x from rice, wheat and corn straw burnings in China for the year 2004 were estimated to be 22.59, 252.92, and 0.28 Tg, respectively. The percentages of CO, CO 2, and NO x to the total emissions were 13.9%, 15.3%, and 31.4% for rice straw, 32.9%, 32.5%, and 20.9% for wheat straw, and 53.2%, 52.2%, and 47.6% for corn straw, respectively. In addition, the emission allocations of agricultural crop residue burning were also plotted in different regions of China using a simple geographic information system (GIS).

  10. An approach for verifying biogenic greenhouse gas emissions inventories with atmospheric CO 2 concentration data

    SciTech Connect

    Ogle, Stephen; Davis, Kenneth J.; Lauvaux, Thomas; Schuh, Andrew E.; Cooley, Dan; West, Tristram O.; Heath, L.; Miles, Natasha; Richardson, S. J.; Breidt, F. Jay; Smith, Jim; McCarty, Jessica L.; Gurney, Kevin R.; Tans, P. P.; Denning, Scott

    2015-03-10

    Verifying national greenhouse gas (GHG) emissions inventories is a critical step to ensure that reported emissions data to the United Nations Framework Convention on Climate Change (UNFCCC) are accurate and representative of a country’s contribution to GHG concentrations in the atmosphere. Verification could include a variety of evidence, but arguably the most convincing verification would be confirmation of a change in GHG concentrations in the atmosphere that is consistent with reported emissions to the UNFCCC. We report here on a case study evaluating this option based on a prototype atmospheric CO2 measurement network deployed in the Mid-Continent Region of the conterminous United States. We found that the atmospheric CO2 measurement data did verify the accuracy of the emissions inventory within the confidence limits of the emissions estimates, suggesting that this technology could be further developed and deployed more widely in the future for verifying reported emissions.

  11. Odour emission inventory of German wastewater treatment plants--odour flow rates and odour emission capacity.

    PubMed

    Frechen, F-B

    2004-01-01

    Wastewater Treatment plants can cause odour emissions that may lead to significant odour annoyance in their vicinity. Thus, over the past 20 years, several measurements were taken of the odour emissions that occur at WWTPs of different sizes, treatment technology, plant design and under different operating conditions. The specific aspects of odour sampling and measurement have to be considered. I presented some of the results of my odour emission measurements 11 years ago. However, it is now necessary to update the figures by evaluating newer measurement results obtained from measurements taken from 1994 to 2003. These are presented in this paper. Also, the paper highlights the odour emission capacity (OEC) measurement technique which characterises liquids and can be used to assess the results achieved by different types of treatment in the liquid phase, e.g. in a sewerage system. In addition, the OEC is a suitable parameter to set standards for the odorant content of industrial wastewaters that are discharged into the publicly owned sewerage system.

  12. Development of a vehicle emission inventory with high temporal-spatial resolution based on NRT traffic data and its impact on air pollution in Beijing - Part 1: Development and evaluation of vehicle emission inventory

    NASA Astrophysics Data System (ADS)

    Jing, Boyu; Wu, Lin; Mao, Hongjun; Gong, Sunning; He, Jianjun; Zou, Chao; Song, Guohua; Li, Xiaoyu; Wu, Zhong

    2016-03-01

    This paper presents a bottom-up methodology based on the local emission factors, complemented with the widely used emission factors of Computer Programme to Calculate Emissions from Road Transport (COPERT) model and near-real-time traffic data on road segments to develop a vehicle emission inventory with high temporal-spatial resolution (HTSVE) for the Beijing urban area. To simulate real-world vehicle emissions accurately, the road has been divided into segments according to the driving cycle (traffic speed) on this road segment. The results show that the vehicle emissions of NOx, CO, HC and PM were 10.54 × 104, 42.51 × 104 and 2.13 × 104 and 0.41 × 104 Mg respectively. The vehicle emissions and fuel consumption estimated by the model were compared with the China Vehicle Emission Control Annual Report and fuel sales thereafter. The grid-based emissions were also compared with the vehicular emission inventory developed by the macro-scale approach. This method indicates that the bottom-up approach better estimates the levels and spatial distribution of vehicle emissions than the macro-scale method, which relies on more information. Based on the results of this study, improved air quality simulation and the contribution of vehicle emissions to ambient pollutant concentration in Beijing have been investigated in a companion paper (He et al., 2016).

  13. A Wildland Fire Emission Inventory for the Western United States -Uncertainty Across Spatial and Temporal Scales

    NASA Astrophysics Data System (ADS)

    Urbanski, S. P.; Hao, W.

    2010-12-01

    Emissions of trace gases and aerosols by biomass burning (BB) have a significant influence on the chemical composition of the atmosphere, air quality, and climate. BB emissions depend on a range of variables including burned area, fuels, meteorology, combustion completeness, and emission factors (EF). Emission algorithms provide BB emission inventories (EI) which serve as critical input for Chemical Transport Models (CTM) employed in atmospheric sciences in a wide array of studies. Many different BB EI are commonly used and agreement among these EI is often poor. In general, the sensitivity of the emission estimates to the algorithm components is not well characterized and the performance of most algorithms have not been examined across the scales they are used. Understanding the sensitivity of EI to algorithm component uncertainties is crucial for assessing their impact on CTM simulations. We examine the spatial and temporal sensitivity of BB emission estimates of CO to uncertainties in mapped fuel loading, fuel consumption, burned area and emission factors. The study focuses on wildland fire in the western United States(2003 - 2008). Two fuel loading maps and 2 fuel consumption models provided 4 fuel load consumption emission scenarios with identical burned area and meteorology. The burned area used in the study was mapped using a MODIS burn scar algorithm. The emission algorithm was run at 1-day and 1-km2. Each of the 4 EI was aggregated across multiple spatial (dx= 10 - 200km2) and temporal (dt= 5day - 1yr) scales to evaluate the algorithm sensitivity to scale. At each (dx, dt) the native scale EI of the 4 scenarios were averaged to provide a ‘best estimate’ EI. The uncertainty associated with fuel load consumption (Uflc) was taken as half the range of emissions predicted by the 4 scenarios at each (dx, dt). Estimated uncertainties for the burned area (Ua) and EF (Uef) were combined with Uflc to provide the CO emissions uncertainty (U). The sensitivity of U

  14. Developing a high-resolution vehicular emission inventory by integrating an emission model and a traffic model: Part 2--A case study in Beijing.

    PubMed

    Wang, Haikun; Fu, Lixin; Chen, Jinchuan

    2010-12-01

    A grid-based, bottom-up method has been proposed by combining a vehicle emission model and a travel demand model to develop a high-resolution vehicular emission inventory for Chinese cities. Beijing is used as a case study in which the focus is on fuel consumption and emissions from hot-stabilized activities of light-duty gasoline vehicles (LGVs) in 2005. The total quantity of emissions, emission intensity, and spatial distribution of emissions at 1- by 1-km resolution are presented and compared with results from other inventory methods commonly used in China. The results show that the total daily fuel consumption and vehicular emissions of carbon dioxide, carbon monoxide, hydrocarbons, and oxides of nitrogen from LGVs in the Beijing urban area in 2005 were 1.95 x 10(7) L, 4.28 x 10(4) t, 1.97 x 10(3) t, 0.28 x 10(3) t, and 0.14 x 10(3) t, respectively. Vehicular fuel consumption and emissions show spatial variations that are consistent with the traffic characteristics. The grid-based inventory developed in this study reflects the influence of traffic conditions on vehicle emissions at the microscale and may be applied to evaluate the effectiveness of traffic-related measures on emission control in China.

  15. [Anthropogenic VOC emission inventory and contribution from industrial sources in Ningbo].

    PubMed

    Li, Xuan; Wang, Xue-Song; Liu, Zhong; Wu, Liang; Weng, Yan-Bo; Hu, Jie

    2014-07-01

    Ningbo is an important industrial city in eastern China and is also the economic center in the south wing of the Yangtze River Delta (YRD). Recently, the VOC emissions from the local industrial activities and its effects on both the regional air quality and people's health were getting more and more attention. The anthropogenic VOC emission inventory of Ningbo in 2010 was established with collecting comprehensive activity data of anthropogenic sources. Furthermore, the industrial sectors were studied and the significant industries were identified with their contribution quantified. The result shows that the amount of anthropogenic VOC emission in Ningbo in 2010 is 176 kt. Industry, transportation and residential source are the most important VOC anthropogenic sources in Ningbo, which accounted for 62.0%, 17.2% and 15.5% respectively. Synthetic materials manufacturing and refined petroleum products manufacturing are the most important VOC emitting industries, which contributed 18.6% and 13.1% of the total VOC amount respectively, signifying the influence of these two industries to the VOC emissions in Ningbo.

  16. An emission inventory of agricultural internal combustion engines for California`s San Joaquin Valley

    SciTech Connect

    Coe, D.; Chinkin, L.; Reiss, R.

    1996-12-31

    Previous work concluded that stationary agricultural internal combustion (IC) engines are a substantial source of criteria pollutants the San Joaquin Valley (SJV). However, due to time and resource restrictions, earlier work did not include a rigorous survey of engine users. Instead, emission estimates were based on interviews with a few knowledgeable experts (e.g., Department of Agricultural Engineering at U.C. Davis, the Agriculture Extension office of U.C. Davis, Farm Bureau, and Water District offices) or were extrapolated from data designed for other purposes. The purpose of the current study, which was sponsored by the San Joaquin Valley Unified Air Pollution Control District, was to improve the estimate of emissions from this source category by conducting a more comprehensive inventory of this source type based on data collected via a telephone survey of engine users. These survey data were then used to estimate and seasonally allocate emissions for this source category. The findings of this current work show that these emissions are much lower than previously estimated.

  17. Evaluating 2012 Ozone Impacts of Natural Gas Development in the Haynesville Shale with an Updated Emission Inventory

    NASA Astrophysics Data System (ADS)

    Kemball-Cook, S. R.; Bar-Ilan, A.; Yarwood, G.

    2013-12-01

    The Haynesville Shale, located approximately 10,000-13,000 feet beneath Northeast Texas and Northwest Louisiana contains very large recoverable reserves of natural gas. Development of the Haynesville began in 2008, and since then, more than 3,000 wells have been drilled. The development of natural gas resources in the Haynesville is economically important, but also generates emissions of ozone precursors in a region with several ozone monitors that are close to or exceeding the 2008 National Ambient Air Quality Standard. During 2009, we developed an emission inventory of ozone precursors for projected future Haynesville Shale development from 2009 through 2020. Photochemical modeling with the 2012 emission inventory showed significant ozone impacts within Northeast Texas and Northwest Louisiana as a result of Haynesville emissions, with projected 8-hour ozone design value increases up to 5 ppb at area monitors. The original emission inventory was assembled during spring 2009, early in the development of the Haynesville when available data were limited. Since then, development in the Haynesville has continued, and additional data are now available and were used to refine the development projections and emission inventory through the year 2020. The updated 2012 emission inventory is now based on actual data rather than projections made in 2009. The number of drilling rigs operating in 2012 was lower than projected, but the well count was higher due intensive drilling activity in 2010-2011 that exceeded projections. The updated emission inventory draws on more Haynesville-specific data than the previous inventory. Energy producers currently active in the Haynesville were surveyed and provided information that included well drilling times, equipment used for well construction, production equipment present at typical Haynesville wells, and produced gas composition analyses. Producers provided information on the amount of truck traffic associated with transport of

  18. Assessment of China's virtual air pollution transport embodied in trade by a consumption-based emission inventory

    NASA Astrophysics Data System (ADS)

    Zhao, H. Y.; Zhang, Q.; Davis, S. J.; Guan, D.; Liu, Z.; Huo, H.; Lin, J. T.; Liu, W. D.; He, K. B.

    2014-10-01

    High anthropogenic emissions from China have resulted in serious air pollution, and it has attracted considerable academic and public concern. The physical transport of air pollutants in the atmosphere has been extensively investigated, however, understanding the mechanisms how the pollutants were transferred through economic and trade activities remains challenge. In this work, we assessed China's virtual air pollutant transport embodied in trade, by using consumption-based accounting approach. We first constructed a consumption-based emission inventory for China's four key air pollutants (primary PM2.5, sulfur dioxide (SO2), nitrogen oxides (NOx) and non-methane volatile organic compounds (NMVOC)) in 2007, based on the bottom-up sectoral emission inventory concerning their production activities - a production-based inventory. We used a multiregional input-output (MRIO) model to integrate the sectoral production-based emissions and the associated economic and trade activities, and finally obtained consumption-based inventory. Unlike the production-based inventory, the consumption-based inventory tracked emissions throughout the supply chain related to the consumption of goods and services and hereby identified the emission flows followed the supply chains. From consumption-based perspective, emissions were significantly redistributed among provinces due to interprovincial trade. Large amount of emissions were embodied in the net imports of east regions from northern and central regions; these were determined by differences in the regional economic status and environmental policies. We also calculated the emissions embodied in exported and imported goods and services. It is found that 15-23% of China's pollutant emissions were related to exports for foreign consumption; that proportion was much higher for central and export-oriented coastal regions. It is suggested that measures should be introduced to reduce air pollution by integrating cross-regional consumers

  19. Crowd-Sourcing Management Activity Data to Drive GHG Emission Inventories in the Land Use Sector

    NASA Astrophysics Data System (ADS)

    Paustian, K.; Herrick, J.

    2015-12-01

    Greenhouse gas (GHG) emissions from the land use sector constitute the largest source category for many countries in Africa. Enhancing C sequestration and reducing GHG emissions on managed lands in Africa has to potential to attract C financing to support adoption of more sustainable land management practices that, in addition to GHG mitigation, can provide co-benefits of more productive and climate-resilient agroecosystems. However, robust systems to measure and monitor C sequestration/GHG reductions are currently a significant barrier to attracting more C financing to land use-related mitigation efforts.Anthropogenic GHG emissions are driven by a variety of environmental factors, including climate and soil attributes, as well as human-activities in the form of land use and management practices. GHG emission inventories typically use empirical or process-based models of emission rates that are driven by environmental and management variables. While a lack of field-based flux and C stock measurements are a limiting factor for GHG estimation, we argue that an even greater limitation may be availabiity of data on the management activities that influence flux rates, particularly in developing countries in Africa. In most developed countries there is a well-developed infrastructure of agricultural statistics and practice surveys that can be used to drive model-based GHG emission estimations. However, this infrastructure is largely lacking in developing countries in Africa. While some activity data (e.g. land cover change) can be derived from remote sensing, many key data (e.g., N fertilizer practices, residue management, manuring) require input from the farmers themselves. The explosive growth in cellular technology, even in many of the poorest parts of Africa, suggests the potential for a new crowd-sourcing approach and direct engagement with farmers to 'leap-frog' the land resource information model of developed countries. Among the many benefits of this approach

  20. Global emissions of hydrogen chloride and chloromethane from coal combustion, incineration and industrial activities: Reactive Chlorine Emissions Inventory

    NASA Astrophysics Data System (ADS)

    McCulloch, Archie; Aucott, Michael L.; Benkovitz, Carmen M.; Graedel, Thomas E.; Kleiman, Gary; Midgley, Pauline M.; Li, Yi-Fan

    1999-04-01

    Much if not all of the chlorine present in fossil fuels is released into the atmosphere as hydrogen chloride (HCl) and chloromethane (CH3Cl, methyl chloride). The chlorine content of oil-based fuels is so low that these sources can be neglected, but coal combustion provides significant releases. On the basis of national statistics for the quantity and quality of coal burned during 1990 in power and heat generation, industrial conversion and residential and commercial heating, coupled with information on the chlorine contents of coals, a global inventory of national HCl emissions from this source has been constructed. This was combined with an estimate of the national emissions of HCl from waste combustion (both large-scale incineration and trash burning) which was based on an estimate of the global quantity released from this source expressed per head of population. Account was taken of reduced emissions where flue gases were processed, for example to remove sulphur dioxide. The HCl emitted in 1990, comprising 4.6 ± 4.3 Tg Cl from fossil fuel and 2 ± 1.9 Tg Cl from waste burning, was spatially distributed using available information on point sources such as power generation utilities and population density by default. Also associated with these combustion sources are chloromethane emissions, calculated to be 0.075 ± 0.07 Tg as Cl (equivalent) from fossil fuels and 0.032 ± 0.023 Tg Cl (equivalent) from waste combustion. These were distributed spatially exactly as the HCl emissions, and a further 0.007 Tg Cl in chloromethane from industrial process activity was distributed by point sources.

  1. Land cover change mapping using MODIS time series to improve emissions inventories

    NASA Astrophysics Data System (ADS)

    López-Saldaña, Gerardo; Quaife, Tristan; Clifford, Debbie

    2016-04-01

    MELODIES is an FP7 funded project to develop innovative and sustainable services, based upon Open Data, for users in research, government, industry and the general public in a broad range of societal and environmental benefit areas. Understanding and quantifying land surface changes is necessary for estimating greenhouse gas and ammonia emissions, and for meeting air quality limits and targets. More sophisticated inventories methodologies for at least key emission source are needed due to policy-driven air quality directives. Quantifying land cover changes on an annual basis requires greater spatial and temporal disaggregation of input data. The main aim of this study is to develop a methodology for using Earth Observations (EO) to identify annual land surface changes that will improve emissions inventories from agriculture and land use/land use change and forestry (LULUCF) in the UK. First goal is to find the best sets of input features that describe accurately the surface dynamics. In order to identify annual and inter-annual land surface changes, a times series of surface reflectance was used to capture seasonal variability. Daily surface reflectance images from the Moderate Resolution Imaging Spectroradiometer (MODIS) at 500m resolution were used to invert a Bidirectional Reflectance Distribution Function (BRDF) model to create the seamless time series. Given the limited number of cloud-free observations, a BRDF climatology was used to constrain the model inversion and where no high-scientific quality observations were available at all, as a gap filler. The Land Cover Map 2007 (LC2007) produced by the Centre for Ecology & Hydrology (CEH) was used for training and testing purposes. A land cover product was created for 2003 to 2015 and a bayesian approach was created to identified land cover changes. We will present the results of the time series development and the first exercises when creating the land cover and land cover changes products.

  2. Colorado State Emissions Inventory Trends 2000-2011 and relevance to the FRAPPE/Discover-AQ Studies

    NASA Astrophysics Data System (ADS)

    Bon, D.; Adelman, Z.; Moore, T.; Wells, D.; Briggs, K. R.

    2015-12-01

    The Intermountain West Data Warehouse (IWDW) was created through joint efforts of Federal agencies (Land Managers and EPA), and State Air Quality Program Managers to address regional scale modeling analysis and planning needs. The IWDW contains monitoring, emissions, and air quality modeling data and analysis tools to support regulatory, research, and academic applications. As one of the participants, the State of Colorado uses the data from the IWDW for a variety of regulatory efforts including modeling efforts to support the development of State Implementation Plans and for air quality research efforts such as the Front Range Air Pollution and Photochemistry Experiment (FRAPPE). The emissions inventories developed for the IWDW are highly detailed and much more suitable to local modeling efforts than the EPA National Emission Inventory. Here we present an overview of the 2011 statewide IWDW emissions inventory for Colorado and examine historic trends in statewide inventories used for modeling, planning and analysis. The IWDW 2011 inventory should prove highly useful to modeling, regulatory, research and policy needs for participating agencies.

  3. A new gridded on-road CO2 emissions inventory for the United States, 1980-2011

    NASA Astrophysics Data System (ADS)

    Gately, C.; Hutyra, L.; Sue Wing, I.

    2013-12-01

    On-road transportation is responsible for 28% of all U.S. fossil fuel CO2 emissions. However, mapping vehicle emissions at regional scales is challenging due to data limitations. Existing emission inventories have used spatial proxies such as population and road density to downscale national or state level data, which may introduce errors where the proxy variables and actual emissions are weakly correlated. We have developed a national on-road emissions inventory product based on roadway-level traffic data obtained from the Highway Performance Monitoring System. We produce annual estimates of on-road CO2 emissions at a 1km spatial resolution for the contiguous United States for the years 1980 through 2011. For the year 2011 we also produce an hourly emissions product at the 1km scale using hourly traffic volumes from hundreds of automated traffic counters across the country. National on-road emissions rose at roughly 2% per year from 1980 to 2006, with emissions peaking at 1.71 Tg CO2 in 2007. However, while national emissions have declined 6% since the peak, we observe considerable regional variation in emissions trends post-2007. While many states show stable or declining on-road emissions, several states and metropolitan areas in the Midwest, mountain west and south had emissions increases of 3-10% from 2008 to 2011. Our emissions estimates are consistent with state-reported totals of gasoline and diesel fuel consumption. This is in contrast to on-road CO2 emissions estimated by the Emissions Database of Global Atmospheric Research (EDGAR), which we show to be inconsistent in matching on-road emissions to published fuel consumption at the scale of U.S. states, due to the non-linear relationships between emissions and EDGAR's chosen spatial proxies at these scales. Since our emissions estimates were generated independent of population density and other demographic data, we were able to conduct a panel regression analysis to estimate the relationship between these

  4. Industrial process data and estimating potential to emit (PTE): The effects of process chemistry on PTE and the emissions inventory

    SciTech Connect

    Najjar, R.C.; Podsiadlo, K.

    1997-12-31

    Title V of the Clean Air Act Amendments of 1990 (Title V) requires facilities to perform an inventory of their air pollutant emissions to determine if a Title V air permit is required. Facilities emitting air pollutants below applicable Title V thresholds (i.e., particulates, oxides of sulfur (SO{sub x}), oxides of nitrogen (NO{sub x}), carbon monoxide, ozone, volatile organic compounds (VOCs), lead, and hazardous air pollutants (HAPs)) still must show proof to the regulatory agencies that the Title V permitting requirements do not apply. Recently, the authors have performed several emissions inventories for some large industrial facilities in New York State with up to 250 air emissions sources. As a result, they have identified several reoccurring process/chemistry data issues that have impacted the estimation of PTE, the current New York State (NYS) point source permit compliance, and the potential Title V application status. Although there are many training courses that focus on how environmental managers should perform a comprehensive facility air emissions inventory and should prepare Title V applications, these courses generally assume that all emission source data are readily available. However, to the authors` knowledge, no one has communicated key process/chemistry issues and obstacles encountered in completing emissions inventories at large facilities or recommended potential solutions. The authors will highlight their experience with reoccurring facility emission data and data management shortfalls found during the performance of several large facility inventories. This includes their findings of apparently systemic loose practices, procedures, data management, and utilization of process data and chemistry for estimation of potential emissions needed for Title V compliance.

  5. Emission inventories for ships in the Arctic based on satellite sampled AIS data

    NASA Astrophysics Data System (ADS)

    Christensen, J. H.; Winther, M.; Plejdrup, M. S.; Ravn, E. S.; Eriksson, O. M.; Kristensen, H. O.

    2013-12-01

    Emissions from ships inside Arctic are an important source of the Arctic pollution as e.g. SO2, NOx and Black Carbon (BC). This paper presents a detailed BC, NOx and SO2 emission inventory for ships in the Arctic for the year 2012 based on satellite AIS data, ship engine power functions and technology stratified emission factors. Emission projections are presented for the years 2020, 2030 and 2050 combined with emission from polar diversion routes as given by Corbett et al. (2010). Furthermore the Danish Eulerian Hemispheric Model (Christensen, 1997; Brandt et al., 2012), which is 3-d Chemical Transport Model covering the Northern hemisphere was use to study the transport of BC, SO2 and O3 and estimate BC deposition results in order to study then current and future contribution from Arctic ship traffics to atmospheric concentrations and deposition of pollutants in the Arctic. In 2012, the largest emission contributions of Artic ships emissions are from fishing ships (45% for BC, 38% for NOx and 23% for SO2) followed by passenger ships (20%, 17%, 25%), tankers (9%, 13%, 15%), general cargo (8%, 11%, 12%) and container ships (5%, 7%, 8%). Without diverted traffic from 2012 to 2050 the total BC, NOx and SO2 emissions are expected to change by 16 %, -32 % and -63 %, respectively. For the year 2012 the average calculated contributions for ships of BC, SO, and O3 concentrations and BC deposition become low and similar for the emissions projections without diverted traffic of the years 2020, 2030 and 2050, but with diverted traffic the contributions for ships to the BC, SO, and O3 concentrations and BC deposition becomes significantly higher especially for the year 2050 and especially during the summer season over the areas, where the diverted traffic are assumed to occur. These high forecasted values for BC sea-ice deposition close to the Polar routes are of main concern due to decreases in the albedo which in turn enhances the melting of sea-ice.

  6. Evaluating greenhouse gas emissions inventories for agricultural burning using satellite observations of active fires.

    PubMed

    Lin, Hsiao-Wen; Jin, Yufang; Giglio, Louis; Foley, Jonathan A; Randerson, James T

    2012-06-01

    Fires in agricultural ecosystems emit greenhouse gases and aerosols that influence climate on multiple spatial and temporal scales. Annex 1 countries of the United Nations Framework Convention on Climate Change (UNFCCC), many of which ratified the Kyoto Protocol, are required to report emissions of CH4 and N2O from these fires annually. In this study, we evaluated several aspects of this reporting system, including the optimality of the crops targeted by the UNFCCC globally and within Annex 1 countries, and the consistency of emissions inventories among different countries. We also evaluated the success of individual countries in capturing interannual variability and long-term trends in agricultural fire activity. In our approach, we combined global high-resolution maps of crop harvest area and production, derived from satellite maps and ground-based census data, with Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) measurements of active fires. At a global scale, we found that adding ground nuts (e.g., peanuts), cocoa, cotton and oil palm, and removing potato, oats, rye, and pulse other from the list of 14 crops targeted by the UNFCCC increased the percentage of active fires covered by the reporting system by 9%. Optimization led to a different recommended list for Annex 1 countries, requiring the addition of sunflower, cotton, rapeseed, and alfalfa and the removal of beans, sugarcane, pulse others, and tuber-root others. Extending emissions reporting to all Annex 1 countries (from the current set of 19 countries) would increase the efficacy of the reporting system from 6% to 15%, and further including several non-Annex 1 countries (Argentina, Brazil, China, India, Indonesia, Thailand, Kazakhstan, Mexico, and Nigeria) would capture over 55% of active fires in croplands worldwide. Analyses of interannual trends from the United States and Australia showed the importance of both intensity of fire use and crop production in controlling year

  7. Evaluating greenhouse gas emissions inventories for agricultural burning using satellite observations of active fires.

    PubMed

    Lin, Hsiao-Wen; Jin, Yufang; Giglio, Louis; Foley, Jonathan A; Randerson, James T

    2012-06-01

    Fires in agricultural ecosystems emit greenhouse gases and aerosols that influence climate on multiple spatial and temporal scales. Annex 1 countries of the United Nations Framework Convention on Climate Change (UNFCCC), many of which ratified the Kyoto Protocol, are required to report emissions of CH4 and N2O from these fires annually. In this study, we evaluated several aspects of this reporting system, including the optimality of the crops targeted by the UNFCCC globally and within Annex 1 countries, and the consistency of emissions inventories among different countries. We also evaluated the success of individual countries in capturing interannual variability and long-term trends in agricultural fire activity. In our approach, we combined global high-resolution maps of crop harvest area and production, derived from satellite maps and ground-based census data, with Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) measurements of active fires. At a global scale, we found that adding ground nuts (e.g., peanuts), cocoa, cotton and oil palm, and removing potato, oats, rye, and pulse other from the list of 14 crops targeted by the UNFCCC increased the percentage of active fires covered by the reporting system by 9%. Optimization led to a different recommended list for Annex 1 countries, requiring the addition of sunflower, cotton, rapeseed, and alfalfa and the removal of beans, sugarcane, pulse others, and tuber-root others. Extending emissions reporting to all Annex 1 countries (from the current set of 19 countries) would increase the efficacy of the reporting system from 6% to 15%, and further including several non-Annex 1 countries (Argentina, Brazil, China, India, Indonesia, Thailand, Kazakhstan, Mexico, and Nigeria) would capture over 55% of active fires in croplands worldwide. Analyses of interannual trends from the United States and Australia showed the importance of both intensity of fire use and crop production in controlling year

  8. Anthropogenic emissions of trichloromethane (chloroform, CHCl3) and chlorodifluoromethane (HCFC-22): Reactive Chlorine Emissions Inventory

    NASA Astrophysics Data System (ADS)

    Aucott, M. L.; McCulloch, A.; Graedel, T. E.; Kleiman, G.; Midgley, P.; Li, Yi-Fan

    1999-04-01

    Anthropogenic emissions of trichloromethane (CHCl3, chloroform) in 1990 have been estimated with a variety of methods specific to the source category. The largest source category for CHCl3 was found to be pulp and paper manufacturing, responsible for an estimated 30±8 Gg yr-1 reactive chlorine in the form of CHCl3. Water treatment of various types was estimated to contribute another 19±12 Gg. Manufacturing facilities of products other than pulp or paper and other relatively minor sources were estimated to emit an additional 13±5 Gg yr-1, for a total of 62±25 Gg yr-1 reactive chlorine in the form of CHCl3. The global flux of chlorodifluoromethane (HCFC-22) is well characterized from industrial and regulatory data to have been 195 Gg in 1990, equivalent to 80±0.6 Gg yr-1 as active chlorine. The fluxes of reactive chlorine from CHCl3 and HCFC-22, distributed globally in a 1° latitude times 1° longitude grid, revealed areas highest in emissions.

  9. Emission inventory of primary pollutants and chemical speciation in 2010 for the Yangtze River Delta region, China

    NASA Astrophysics Data System (ADS)

    Fu, Xiao; Wang, Shuxiao; Zhao, Bin; Xing, Jia; Cheng, Zhen; Liu, Huan; Hao, Jiming

    2013-05-01

    We developed a high-resolution emission inventory of primary air pollutants for Yangtze River Delta (YRD) region, which included Shanghai plus 24 cities in the provinces of Jiangsu and Zhejiang. The emissions of SO2, NOX, PM10, PM2.5, NMVOCs and NH3 in the year of 2010 were estimated as 2147 kt, 2776 kt, 1006 kt, 643 kt, 3822 kt and 1439 kt, respectively. Power plants are the largest emission sources for SO2 and NOX, which contributes 44.1% and 37.3% of total SO2 and NOX emissions. Emissions from industrial process accounted for 26.9%, 28.9% and 33.7% of the total PM10, PM2.5 and NMVOCs respectively. Besides, 37.3% of NMVOCs emissions were contributed by solvent use. Livestock and fertilizer application contribute over 90% of NH3 emissions. High emission densities are visible in Shanghai and the area around Tai Lake. This emission inventory includes the speciation of PM2.5 for the YRD region for the first time, which is important to source apportionment and secondary-pollution analysis. In 2010, emissions of three major PM2.5 species, namely OC, EC and sulfate, are 136.9 kt, 75.0 kt and 76.2 kt, respectively. Aromatics and alkanes are the main NMVOC species, accounting for 30.4% and 20.3% of total VOCs. Non-road transportation and biomass burning were main uncertain sources because of a lack of proper activity and emission factor data. Compared with other pollutants, NMVOCs and NH3 have higher uncertainty. From 2000 to 2010, emissions of all pollutants have changed significantly, suggesting that the newly updated and high-resolution emission inventory will be useful for the identification of air pollution sources in YRD.

  10. The contribution of evaporative emissions from gasoline vehicles to the volatile organic compound inventory in Mexico City.

    PubMed

    Schifter, I; Díaz, L; Rodríguez, R; González-Macías, C

    2014-06-01

    The strategy for decreasing volatile organic compound emissions in Mexico has been focused much more on tailpipe emissions than on evaporative emissions, so there is very little information on the contribution of evaporative emissions to the total volatile organic compound inventory. We examined the magnitudes of exhaust and evaporative volatile organic compound emissions, and the species emitted, in a representative fleet of light-duty gasoline vehicles in the Metropolitan Area of Mexico City. The US "FTP-75" test protocol was used to estimate volatile organic compound emissions associated with diurnal evaporative losses, and when the engine is started and a journey begins. The amount and nature of the volatile organic compounds emitted under these conditions have not previously been accounted in the official inventory of the area. Evaporative emissions from light-duty vehicles in the Metropolitan Area of Mexico City were estimated to be 39 % of the total annual amount of hydrocarbons emitted. Vehicles built before 1992 (16 % of the fleet) were found to be responsible for 43 % of the total hydrocarbon emissions from exhausts and 31 % of the evaporative emissions of organic compounds. The relatively high amounts of volatile organic compounds emitted from older vehicles found in this study show that strong emission controls need to be implemented in order to decrease the contribution of evaporative emissions of this fraction of the fleet. PMID:24526614

  11. The contribution of evaporative emissions from gasoline vehicles to the volatile organic compound inventory in Mexico City.

    PubMed

    Schifter, I; Díaz, L; Rodríguez, R; González-Macías, C

    2014-06-01

    The strategy for decreasing volatile organic compound emissions in Mexico has been focused much more on tailpipe emissions than on evaporative emissions, so there is very little information on the contribution of evaporative emissions to the total volatile organic compound inventory. We examined the magnitudes of exhaust and evaporative volatile organic compound emissions, and the species emitted, in a representative fleet of light-duty gasoline vehicles in the Metropolitan Area of Mexico City. The US "FTP-75" test protocol was used to estimate volatile organic compound emissions associated with diurnal evaporative losses, and when the engine is started and a journey begins. The amount and nature of the volatile organic compounds emitted under these conditions have not previously been accounted in the official inventory of the area. Evaporative emissions from light-duty vehicles in the Metropolitan Area of Mexico City were estimated to be 39 % of the total annual amount of hydrocarbons emitted. Vehicles built before 1992 (16 % of the fleet) were found to be responsible for 43 % of the total hydrocarbon emissions from exhausts and 31 % of the evaporative emissions of organic compounds. The relatively high amounts of volatile organic compounds emitted from older vehicles found in this study show that strong emission controls need to be implemented in order to decrease the contribution of evaporative emissions of this fraction of the fleet.

  12. Analysis of long-term observations of NOx and CO in megacities and application to constraining emissions inventories

    NASA Astrophysics Data System (ADS)

    Hassler, Birgit; McDonald, Brian C.; Frost, Gregory J.; Borbon, Agnes; Carslaw, David C.; Civerolo, Kevin; Granier, Claire; Monks, Paul S.; Monks, Sarah; Parrish, David D.; Pollack, Ilana B.; Rosenlof, Karen H.; Ryerson, Thomas B.; Schneidemesser, Erika; Trainer, Michael

    2016-09-01

    Long-term atmospheric NOx/CO enhancement ratios in megacities provide evaluations of emission inventories. A fuel-based emission inventory approach that diverges from conventional bottom-up inventory methods explains 1970-2015 trends in NOx/CO enhancement ratios in Los Angeles. Combining this comparison with similar measurements in other U.S. cities demonstrates that motor vehicle emissions controls were largely responsible for U.S. urban NOx/CO trends in the past half century. Differing NOx/CO enhancement ratio trends in U.S. and European cities over the past 25 years highlights alternative strategies for mitigating transportation emissions, reflecting Europe's increased use of light-duty diesel vehicles and correspondingly slower decreases in NOx emissions compared to the U.S. A global inventory widely used by global chemistry models fails to capture these long-term trends and regional differences in U.S. and Europe megacity NOx/CO enhancement ratios, possibly contributing to these models' inability to accurately reproduce observed long-term changes in tropospheric ozone.

  13. Compilation and application of Japanese inventories for energy consumption and air pollutant emissions using input-output tables.

    PubMed

    Nansai, Keisuke; Moriguchi, Yuichi; Tohno, Susumu

    2003-05-01

    Preparing emission inventories is essential to the assessment and management of our environment. In this study, Japanese air pollutant emissions, energy consumption, and CO2 emissions categorized by approximately 400 sectors (as classified by Japanese input-output tables in 1995) were estimated, and the contributions of each sector to the total amounts were analyzed. The air pollutants examined were nitrogen oxides (NOx), sulfur oxides (SOx), and suspended particulate matter (SPM). Consumptions of about 20 fossil fuels and five other fuels were estimated according to sector. Air pollutant emission factors for stationary sources were calculated from the results of a survey on air pollution prevention in Japan. Pollutant emissions from mobile sources were estimated taking into consideration vehicle types, traveling speeds, and distances. This work also counted energy supply and emissions from seven nonfossil fuel sources, including nonthermal electric power, and CO2 emissions from limestone (for example, during cement production). The total energy consumption in 1995 was concluded to be 18.3 EJ, and the annual total emissions of CO2, NOx, SOx, and SPM were, respectively, 343 Mt-C, 3.51 Mt, 1.87 Mt, and 0.32 Mt. An input-output analysis of the emission inventories was used to calculate the amounts of energy consumption and emissions induced in each sector by the economic final demand. PMID:12775078

  14. Towards an inventory of methane emissions from manure management that is responsive to changes on Canadian farms

    NASA Astrophysics Data System (ADS)

    VanderZaag, A. C.; MacDonald, J. D.; Evans, L.; Vergé, X. P. C.; Desjardins, R. L.

    2013-09-01

    Methane emissions from manure management represent an important mitigation opportunity, yet emission quantification methods remain crude and do not contain adequate detail to capture changes in agricultural practices that may influence emissions. Using the Canadian emission inventory methodology as an example, this letter explores three key aspects for improving emission quantification: (i) obtaining emission measurements to improve and validate emission model estimates, (ii) obtaining more useful activity data, and (iii) developing a methane emission model that uses the available farm management activity data. In Canada, national surveys to collect manure management data have been inconsistent and not designed to provide quantitative data. Thus, the inventory has not been able to accurately capture changes in management systems even between manure stored as solid versus liquid. To address this, we re-analyzed four farm management surveys from the past decade and quantified the significant change in manure management which can be linked to the annual agricultural survey to create a continuous time series. In the dairy industry of one province, for example, the percentage of manure stored as liquid increased by 300% between 1991 and 2006, which greatly affects the methane emission estimates. Methane emissions are greatest from liquid manure, but vary by an order of magnitude depending on how the liquid manure is managed. Even if more complete activity data are collected on manure storage systems, default Intergovernmental Panel on Climate Change (IPCC) guidance does not adequately capture the impacts of management decisions to reflect variation among farms and regions in inventory calculations. We propose a model that stays within the IPCC framework but would be more responsive to farm management by generating a matrix of methane conversion factors (MCFs) that account for key factors known to affect methane emissions: temperature, retention time and inoculum. This

  15. A gridded version of the US EPA inventory of methane emissions for use as a priori and reference in methane source inversions

    NASA Astrophysics Data System (ADS)

    Maasakkers, J. D.; Jacob, D. J.; Payer Sulprizio, M.; Turner, A. J.; Weitz, M.; Wirth, T. C.; Hight, C.; DeFigueiredo, M.; Desai, M.; Schmeltz, R.; Hockstad, L.; Bloom, A. A.; Bowman, K. W.

    2015-12-01

    The US EPA produces annual estimates of national anthropogenic methane emissions in the Inventory of US Greenhouse Gas Emissions and Sinks (EPA inventory). These are reported to the UN and inform national climate policy. The EPA inventory uses best available information on emitting processes (IPCC Tier 2/3 approaches). However, inversions of atmospheric observations suggest that the inventory could be too low. These inversions rely on crude bottom-up estimates as a priori because the EPA inventory is only available as national totals for most sources. Reliance on an incorrect a priori greatly limits the value of inversions for testing and improving the EPA inventory as allocation of methane emissions by source types and regions can vary greatly between different bottom-up inventories. Here we present a 0.1° × 0.1° monthly version of the EPA inventory to serve as a priori for inversions of atmospheric data and to interpret inversion results. We use a wide range of process-specific information to allocate emissions, incorporating facility-level data reported through the EPA Greenhouse Gas Reporting Program where possible. As an illustration of used gridding strategies, gridded livestock emissions are based on EPA emission data per state, USDA livestock inventories per county, and USDA weighted land cover maps for sub-county localization. Allocation of emissions from natural gas systems incorporates monthly well-level production data, EIA compressor station and processing plant databases, and information on pipelines. Our gridded EPA inventory shows large differences in spatial emission patterns compared to the EDGAR v4.2 global inventory used as a priori in previous inverse studies. Our work greatly enhances the potential of future inversions to test and improve the EPA inventory and more broadly to improve understanding of the factors controlling methane concentrations and their trends. Preliminary inversion results using GOSAT satellite data will be presented.

  16. A Sub-category Disaggregated Greenhouse Gas Emission Inventory for the Bogota Region, Colombia

    NASA Astrophysics Data System (ADS)

    Pulido-Guio, A. D.; Rojas, A. M.; Ossma, L. J.; Jimenez-Pizarro, R.

    2012-12-01

    estimated at 22.96±1.25 (1-sigma) Tg of CO2 equivalent (10.46±0.93 Tg CO2-e from Cundinamarca and 12.51±0.83 Tg CO2-eq from Bogota). 63% of Cundinamarca's GHG emissions are due to road transportation, agricultural soil management, enteric fermentation and fuel use in the cement industry. The road transportation and waste disposal sectors share 62% of emissions in Bogota. These activity sectors are considered to be the main GHG mitigation assessment targets. The calculated per capita emissions, 1.7 ton CO2-eq/hab-year for Bogota and 4.4 ton CO2-eq/hab-year for Cundinamarca (excluding emissions due to land-use change), do not reflect the fact that Cundinamarca provides goods and services to the city of Bogota. A deeper analysis is thus required to quantitatively account for Bogota's urban metabolism, including GHG emissions associated with consumption patterns. It is expected that the developed and applied methodologies, and the systematic compilation of the gathered information, will facilitate the development of GHG inventories for other regions of Colombia.

  17. COMPARISON OF THE 1985 NAPAP EMISSIONS INVENTORY WITH THE 1985 EPA TRENDS ESTIMATE FOR INDUSTRIAL SO2 SOURCES

    EPA Science Inventory

    The report gives results of analysis of 1985 industrial sulfur dioxide (SO2) emissions from two data sources: the National Acid Precipitation Assessment Program (NAPAP) inventory and the EPA TRENDS report. These analyses conclude that the two data sources estimate comparable emis...

  18. A process-based inventory model for landfill CH4 emissions inclusive of seasonal soil microclimate and CH4 oxidation

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We have developed and field-validated an annual inventory model for California landfill CH4 emissions that incorporates both site-specific soil properties and soil microclimate modeling coupled to 0.5o scale global climatic models. Based on 1-D diffusion, CALMIM (California Landfill Methane Inventor...

  19. Aircraft Emission Inventories Projected in Year 2015 for a High Speed Civil Transport (HSCT) Universal Airline Network. Final report

    SciTech Connect

    Baughcum, S.L.; Henderson, S.C.

    1995-07-01

    This report describes the development of a three-dimensional database of aircraft fuel burn and emissions (fuel burned, NOx, CO, and hydrocarbons) from projected fleets of high speed civil transports (HSCT`s) on a universal airline network. Inventories for 500 and 1000 HSCT fleets, as well as the concurrent subsonic fleets, were calculated. The objective of this work was to evaluate the changes in geographical distribution of the HSCT emissions as the fleet size grew from 500 to 1000 HSCT`s. For this work, a new expanded HSCT network was used and flights projected using a market penetration analysis rather than assuming equal penetration as was done in the earlier studies. Emission inventories on this network were calculated for both Mach 2.0 and Mach 2.4 HSCT fleets with NOx cruise emission indices of approximately 5 and 15 grams NOx/kg fuel. These emissions inventories are available for use by atmospheric scientists conducting the Atmospheric Effects of Stratospheric Aircraft (AESA) modeling studies. Fuel burned and emissions of nitrogen oxides (NOx as NO2), carbon monoxide, and hydrocarbons have been calculated on a 1 degree latitude x 1 degree longitude x 1 kilometer attitude grid and delivered to NASA as electronic files.

  20. Aircraft Emission Inventories Projected in Year 2015 for a High Speed Civil Transport (HSCT) Universal Airline Network

    NASA Technical Reports Server (NTRS)

    Baughcum, Steven L.; Henderson, Stephen C.

    1995-01-01

    This report describes the development of a three-dimensional database of aircraft fuel burn and emissions (fuel burned, NOx, CO, and hydrocarbons) from projected fleets of high speed civil transports (HSCT's) on a universal airline network.Inventories for 500 and 1000 HSCT fleets, as well as the concurrent subsonic fleets, were calculated. The objective of this work was to evaluate the changes in geographical distribution of the HSCT emissions as the fleet size grew from 500 to 1000 HSCT's. For this work, a new expanded HSCT network was used and flights projected using a market penetration analysis rather than assuming equal penetration as was done in the earlier studies. Emission inventories on this network were calculated for both Mach 2.0 and Mach 2.4 HSCT fleets with NOx cruise emission indices of approximately 5 and 15 grams NOx/kg fuel. These emissions inventories are available for use by atmospheric scientists conducting the Atmospheric Effects of Stratospheric Aircraft (AESA) modeling studies. Fuel burned and emissions of nitrogen oxides (NOx as NO2), carbon monoxide, and hydrocarbons have been calculated on a 1 degree latitude x 1 degree longitude x 1 kilometer attitude grid and delivered to NASA as electronic files.

  1. Inventory of China's Energy-Related CO2 Emissions in 2008

    SciTech Connect

    Fridley, David; Zheng, Nina; Qin, Yining

    2011-03-31

    Although China became the world's largest emitter of energy-related CO{sub 2} emissions in 2007, China does not publish annual estimates of CO{sub 2} emissions and most published estimates of China's emissions have been done by other international organizations. Undertaken at the request of the Energy Information Administration (EIA) of the US Department of Energy, this study examines the feasibility of applying the EIA emissions inventory methodology to estimate China's emissions from published Chinese data. Besides serving as a proof of concept, this study also helps develop a consistent and transparent method for estimating China's CO{sub 2} emissions using an Excel model and identified China-specific data issues and areas for improvement. This study takes a core set of data from the energy balances published in the China Energy Statistical Yearbook 2009 and China Petrochemical Corporation Yearbook 2009 and applies the EIA's eight-step methodology to estimate China's 2008 CO{sub 2} emissions. First, China's primary and secondary fuel types and consumption by end use are determined with slight discrepancies identified between the two data sources and inconsistencies in product categorization with the EIA. Second, energy consumption data are adjusted to eliminate double counting in the four potential areas identified by EIA; consumption data from China's Special Administrative Regions are not included. Physical fuel units are then converted to energy equivalents using China's standard energy measure of coal equivalent (1 kilogram = 29.27 MJ) and IPCC carbon emissions coefficients are used to calculate each fuel's carbon content. Next, carbon sequestration is estimated following EIA conventions for other petroleum products and non-energy use of secondary fuels. Emissions from international bunker fuels are also subtracted under the 'reference' calculation of estimating apparent energy consumption by fuel type and the 'sectoral' calculation of summing emissions

  2. Policy change driven by an AIS-assisted marine emission inventory in Hong Kong and the Pearl River Delta

    NASA Astrophysics Data System (ADS)

    Ng, Simon K. W.; Loh, Christine; Lin, Chubin; Booth, Veronica; Chan, Jimmy W. M.; Yip, Agnes C. K.; Li, Ying; Lau, Alexis K. H.

    2013-09-01

    A new exhaust emission inventory of ocean-going vessels (OGVs) was compiled for Hong Kong by using Automatic Identification System (AIS) data for the first time to determine typical main engine load factors, through vessel speed and operation mode characterization. It was found that in 2007, container vessel was the top emitting vessel type, contributing 9,886, 11,480, 1,173, 521 and 1166 tonnes of SO2, NOx, PM10, VOC and CO, respectively, or about 80%-82% of the emissions. The top five, which also included ocean cruise, oil tanker, conventional cargo vessel and dry bulk carrier, accounted for about 98% of emissions. Emission maps, which add a new spatial dimension to the inventory, show the key emission hot spots in Hong Kong and suggest that a significant portion of emissions were emitted at berth. Scientific evidence about the scale and distribution of ship emissions has contributed in raising public awareness and facilitating stakeholder engagement about the issue. Fair Winds Charter, the world's first industry-led voluntary emissions reduction initiative, is a perfect example of how careful scientific research can be used in public engagement and policy deliberation to help drive voluntary industry actions and then government proposals to control and regulate marine emissions in Hong Kong and the Pearl River Delta region.

  3. Present-day and future global bottom-up ship emission inventories including polar routes.

    PubMed

    Paxian, Andreas; Eyring, Veronika; Beer, Winfried; Sausen, Robert; Wright, Claire

    2010-02-15

    We present a global bottom-up ship emission algorithm that calculates fuel consumption, emissions, and vessel traffic densities for present-day (2006) and two future scenarios (2050) considering the opening of Arctic polar routes due to projected sea ice decline. Ship movements and actual ship engine power per individual ship from Lloyd's Marine Intelligence Unit (LMIU) ship statistics for six months in 2006 and further mean engine data from literature serve as input. The developed SeaKLIM algorithm automatically finds the most probable shipping route for each combination of start and destination port of a certain ship movement by calculating the shortest path on a predefined model grid while considering land masses, sea ice, shipping canal sizes, and climatological mean wave heights. The resulting present-day ship activity agrees well with observations. The global fuel consumption of 221 Mt in 2006 lies in the range of previously published inventories when undercounting of ship numbers in the LMIU movement database (40,055 vessels) is considered. Extrapolated to 2007 and ship numbers per ship type of the recent International Maritime Organization (IMO) estimate (100,214 vessels), a fuel consumption of 349 Mt is calculated which is in good agreement with the IMO total of 333 Mt. The future scenarios show Arctic polar routes with regional fuel consumption on the Northeast and Northwest Passage increasing by factors of up to 9 and 13 until 2050, respectively. PMID:20088494

  4. Present-day and future global bottom-up ship emission inventories including polar routes.

    PubMed

    Paxian, Andreas; Eyring, Veronika; Beer, Winfried; Sausen, Robert; Wright, Claire

    2010-02-15

    We present a global bottom-up ship emission algorithm that calculates fuel consumption, emissions, and vessel traffic densities for present-day (2006) and two future scenarios (2050) considering the opening of Arctic polar routes due to projected sea ice decline. Ship movements and actual ship engine power per individual ship from Lloyd's Marine Intelligence Unit (LMIU) ship statistics for six months in 2006 and further mean engine data from literature serve as input. The developed SeaKLIM algorithm automatically finds the most probable shipping route for each combination of start and destination port of a certain ship movement by calculating the shortest path on a predefined model grid while considering land masses, sea ice, shipping canal sizes, and climatological mean wave heights. The resulting present-day ship activity agrees well with observations. The global fuel consumption of 221 Mt in 2006 lies in the range of previously published inventories when undercounting of ship numbers in the LMIU movement database (40,055 vessels) is considered. Extrapolated to 2007 and ship numbers per ship type of the recent International Maritime Organization (IMO) estimate (100,214 vessels), a fuel consumption of 349 Mt is calculated which is in good agreement with the IMO total of 333 Mt. The future scenarios show Arctic polar routes with regional fuel consumption on the Northeast and Northwest Passage increasing by factors of up to 9 and 13 until 2050, respectively.

  5. Verification of CORINAIR 90 emission inventory by comparison with ambient air measurements

    SciTech Connect

    Pulles, T.; Esser, P.; Mareckova, K.; Kozakovic, L.

    1996-12-31

    This study aims at a validation of the CORINAIR 90 emission inventory by a comparison with measured air quality in the Netherlands and in the Slovak Republic. A regional scale atmospheric transport model (Lows) has been used to calculate air quality on a {+-} 60 {times} 60 km{sup 2} grid over Europe, using the CORINAIR 90 emissions database. The calculations have been performed for the 1990 meteorological situation. Application of the model results in calculated yearly averaged wind direction dependent concentrations of NO{sub x}, SO{sub 2} and CO. These results are statistically compared with measurements of national air quality monitoring networks in both countries. Due to characteristics of the monitoring networks in the Netherlands and in the Slovak Republic, the results of this comparison are more conclusive for the Netherlands as compared to the Slovak Republic. Slovak measuring sites seem to be influenced by local effects to such an extent that comparison with the relatively course spatial resolution of the model does not yield clear results. Within the Netherlands a fair agreement between calculated and measured air pollutant concentrations is observed for SO{sub 2} no clear pattern is recognized in the comparison. Differences between measurements and calculations are mainly attributed to local influences. NO{sub x} and CO concentrations appear to be underestimated at south-easterly wind directions. At many grid cells calculated concentrations are lower than the measured ones. The difference seems to be larger for NO{sub x} than for CO.

  6. A process-based inventory model for landfill CH4 emissions inclusive of seasonal soil microclimate and CH4 oxidation

    NASA Astrophysics Data System (ADS)

    Spokas, K.; Bogner, J.; Chanton, J.

    2011-12-01

    We have developed and field-validated an annual inventory model for California landfill CH4 emissions that incorporates both site-specific soil properties and soil microclimate modeling coupled to 0.5° scale global climatic models. Based on 1-D diffusion, CALMIM (California Landfill Methane Inventory Model) is a freely available JAVA tool which models a typical annual cycle for CH4 emissions from site-specific daily, intermediate, and final landfill cover designs. Literature over the last decade has emphasized that the major factors controlling emissions in these highly managed soil systems are the presence or absence of engineered gas extraction, gaseous transport rates as affected by the thickness and physical properties of cover soils, and methanotrophic CH4 oxidation in cover materials as a function of seasonal soil microclimate. Moreover, current IPCC national inventory models for landfill CH4 emissions based on theoretical gas generation have high uncertainties and lack comprehensive field validation. This new approach, which is compliant with IPCC "Tier III" criteria, has been field-validated at two California sites (Monterey County; Los Angeles County), with limited field validation at three additional California sites. CALMIM accurately predicts soil temperature and moisture trends with emission predictions within the same order of magnitude as field measurements, indicating an acceptable initial model comparison in the context of published literature on measured CH4 emissions spanning 7 orders of magnitude. In addition to regional defaults for inventory purposes, CALMIM permits user-selectable parameters and boundary conditions for more rigorous site-specific applications where detailed CH4 emissions, meteorological, and soil microclimate data exist.

  7. High resolution wetland mapping in West Siberian taiga zone for methane emission inventory

    NASA Astrophysics Data System (ADS)

    Terentieva, I. E.; Glagolev, M. V.; Lapshina, E. D.; Sabrekov, A. F.; Maksyutov, S. S.

    2015-12-01

    High latitude wetlands are important for understanding climate change risks because these environments sink carbon and emit methane. Fine scale heterogeneity of wetland landscapes pose challenges for producing the greenhouse gas flux inventories based on point observations. To reduce uncertainties at the regional scale, we mapped wetlands and water bodies in the taiga zone of West Siberia on a scene-by-scene basis using a supervised classification of Landsat imagery. The training dataset was based on high-resolution images and field data that were collected at 28 test areas. Classification scheme was aimed at methane inventory applications and included 7 wetland ecosystem types composing 9 wetland complexes in different proportions. Accuracy assessment based on 1082 validation polygons of 10 × 10 pixels indicated an overall map accuracy of 79 %. The total area of the wetlands and water bodies was estimated to be 52.4 Mha or 4-12 % of the global wetland area. Ridge-hollow complexes prevail in WS's taiga, occupying 33 % of the domain, followed by forested bogs or "ryams" (23 %), ridge-hollow-lake complexes (16 %), open fens (8 %), palsa complexes (7 %), open bogs (5 %), patterned fens (4 %), and swamps (4 %). Various oligotrophic environments are dominant among the wetland ecosystems, while fens cover only 14 % of the area. Because of the significant update in the wetland ecosystem coverage, a considerable revaluation of the total CH4 emissions from the entire region is expected. A new Landsat-based map of WS's taiga wetlands provides a benchmark for validation of coarse-resolution global land cover products and wetland datasets in high latitudes.

  8. Air quality in China from 1850 to 2050 simulated using the IPCC AR5 emissions inventories

    NASA Astrophysics Data System (ADS)

    Chang, W.; Liao, H.

    2011-12-01

    Understanding the changes in regional air quality is central for air quality planning and for understanding the climatic effects of air pollutants. This study applies a fully coupled global chemistry-aerosol-climate model to investigate the interdecadal changes in air pollutants in China from 1850 to 2050. The model includes a detailed simulation of tropospheric O3-NOx-hydrocarbon chemistry, as well as sulfate, nitrate, ammonium, black carbon (BC), primary organic aerosol (POA), and secondary organic aerosol (SOA). The simulations are performed based on the IPCC AR5 historical emissions inventories and four future scenarios (RCP2.6, RCP4.5, RCP6.0, and RCP8.5). Model results show that the global mean surface-layer PM2.5 aerosol concentration peaked in 1980 with a global mean value of 2.61μg m-3, and then has been decreasing afterwards. A large fraction of the decrease can be explained by the reductions in sulfate aerosol over Europe and North America. The surface-layer PM2.5 concentration in China, however, showed monotonous increase since the preindustrial time. Averaged over eastern China, sulfate aerosol is found to have a relatively stable concentration of 5.5μg m-3 after 1980, whereas the year 2000 concentrations of nitrate, ammonium, BC, POA, and SOA are, respectively, 3.0, 1.6, 1.8, 1.4, and 1.5 times the 1980 values. As a result, the ratio of sulfate to PM2.5 in eastern China decreased from 49% in 1980 to 37% in 2000. These preliminary results indicate that, besides the emission control for SO2, a complex emission reduction strategy targeting other aerosol species is necessary for improving air quality in China.

  9. Direct Top-down Estimates of Biomass Burning CO Emissions Using TES and MOPITT Versus Bottom-up GFED Inventory

    NASA Technical Reports Server (NTRS)

    Pechony, Olga; Shindell, Drew T.; Faluvegi, Greg

    2013-01-01

    In this study, we utilize near-simultaneous observations from two sets of multiple satellite sensors to segregate Tropospheric Emission Spectrometer (TES) and Measurements of Pollution in the Troposphere (MOPITT) CO observations over active fire sources from those made over clear background. Hence, we obtain direct estimates of biomass burning CO emissions without invoking inverse modeling as in traditional top-down methods. We find considerable differences between Global Fire Emissions Database (GFED) versions 2.1 and 3.1 and satellite-based emission estimates in many regions. Both inventories appear to greatly underestimate South and Southeast Asia emissions, for example. On global scales, however, CO emissions in both inventories and in the MOPITT-based analysis agree reasonably well, with the largest bias (30%) found in the Northern Hemisphere spring. In the Southern Hemisphere, there is a one-month shift between the GFED and MOPITT-based fire emissions peak. Afternoon tropical fire emissions retrieved from TES are about two times higher than the morning MOPITT retrievals. This appears to be both a real difference due to the diurnal fire activity variations, and a bias due to the scarcity of TES data.

  10. The Fire INventory from NCAR (FINN) - a high resolution global model to estimate the emissions from open burning

    NASA Astrophysics Data System (ADS)

    Wiedinmyer, C.; Akagi, S. K.; Yokelson, R. J.; Emmons, L. K.; Al-Saadi, J. A.; Orlando, J. J.; Soja, A. J.

    2010-12-01

    The Fire INventory from NCAR version 1.0 (FINNv1) provides daily, 1 km resolution, global estimates of the trace gas and particle emissions from open burning of biomass, which includes wildfire, agricultural fires, and prescribed burning and does not include biofuel use and trash burning. Emission factors used in the calculations have been updated with recent data, particularly for the non-methane organic compounds (NMOC). The resulting global annual NMOC emission estimates are as much as a factor of 5 greater than some prior estimates. Chemical speciation profiles, necessary to allocate the total NMOC emission estimates to lumped species for use by chemical transport models, are provided for three widely used chemical mechanisms: SAPRC99, GEOS-CHEM, and MOZART-4. Using these profiles, FINNv1 also provides global estimates of key organic compounds, including formaldehyde and methanol. The uncertainty in the FINNv1 emission estimates are about a factor of two; but, the estimates agree closely with other global inventories of biomass burning emissions for CO, CO2, and other species with less variable emission factors. FINNv1 emission estimates have been developed specifically for modeling atmospheric chemistry and air quality in a consistent framework at scales from local to global. The product is unique because of the high temporal and spatial resolution, global coverage, and the number of species estimated. FINNv1 can be used for both hindcast and forecast or near-real time model applications and the results are being critically evaluated with models and observations whenever possible.

  11. Evaluating uncertainties in nitrous oxide emission inventories with multi-scale observations for an agriculture-dominated region

    NASA Astrophysics Data System (ADS)

    Zhang, X.; Lee, X.; Griffis, T. J.; Baker, J. M.

    2014-12-01

    Although agriculture accounts for about 80% of the global anthropogenic nitrous oxide (N2O) emissions, large uncertainties exist in regional inventories of N2O emissions from agriculture. The uncertainties mainly include poorly quantified plant flux, large heterogeneity of direct N2O emissions from cropland, and underestimated N2O lost through leaching and run off. To evaluate these uncertainties we conducted observations on three contrasting scales in the Midwest U.S., an agriculture dominated region (Zhang et al., 2014a). Observations at the plant, ecosystem, and regional scales include: 1) N2O flux measurements from the aboveground section of corn and soybean plants using newly designed plant chamber; 2) N2O flux-gradient measurements in a soybean-corn rotation field; and 3) N2O concentration measurements at 3 m and 200 m level on a communication tower (KCMP tower, 44°41'19''N, 93°4'22''W) that were used to estimate regional N2O fluxes with boundary layer methods (Zhang et al., 2014b). With these observations we evaluated the uncertainties in two frequently-used N2O inventories: EDGAR42 (Emission Database for Global Atmospheric Research, release version 4.2); and a national GHG inventory (U.S. EPA, 2014). The results indicate that EDGAR42 and EPA inventory underestimated N2O emissions for the region around the KCMP tower at least by a factor of three and two respectively. The underestimation is not likely caused by neglecting N2O flux from crops since N2O fluxes from unfertilized soybean and fertilized corn plants were about one magnitude lower than N2O emissions from the soil-plant ecosystem. The direct N2O emissions from cropland accounted for less than 20% of the regional flux, suggesting a significant influence by other sources and indirect emissions in the regional N2O budget. ReferencesU.S. EPA (2014) Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2012, 529 pp., Washington, D.C.. X Zhang, X Lee, TJ Griffis, AE Andrews, JM Baker, MD Erickson

  12. Integrating Source Apportionment Tracers into a Bottom-up Inventory of Methane Emissions in the Barnett Shale Hydraulic Fracturing Region.

    PubMed

    Townsend-Small, Amy; Marrero, Josette E; Lyon, David R; Simpson, Isobel J; Meinardi, Simone; Blake, Donald R

    2015-07-01

    A growing dependence on natural gas for energy may exacerbate emissions of the greenhouse gas methane (CH4). Identifying fingerprints of these emissions is critical to our understanding of potential impacts. Here, we compare stable isotopic and alkane ratio tracers of natural gas, agricultural, and urban CH4 sources in the Barnett Shale hydraulic fracturing region near Fort Worth, Texas. Thermogenic and biogenic sources were compositionally distinct, and emissions from oil wells were enriched in alkanes and isotopically depleted relative to natural gas wells. Emissions from natural gas production varied in δ(13)C and alkane ratio composition, with δD-CH4 representing the most consistent tracer of natural gas sources. We integrated our data into a bottom-up inventory of CH4 for the region, resulting in an inventory of ethane (C2H6) sources for comparison to top-down estimates of CH4 and C2H6 emissions. Methane emissions in the Barnett are a complex mixture of urban, agricultural, and fossil fuel sources, which makes source apportionment challenging. For example, spatial heterogeneity in gas composition and high C2H6/CH4 ratios in emissions from conventional oil production add uncertainty to top-down models of source apportionment. Future top-down studies may benefit from the addition of δD-CH4 to distinguish thermogenic and biogenic sources.

  13. A harmonised dataset of greenhouse gas emissions inventories from cities under the EU Covenant of Mayors initiative

    NASA Astrophysics Data System (ADS)

    Iancu, A.; Martelli, S.; Cerutti, A. K.; Janssens-Maenhout, G.; Melica, G.; Rivas-Calvete, S.; Kona, A.; Zancanella, P.; Bertoldi, P.

    2015-06-01

    The realization of national climate change commitments, as agreed through international negotiations, requires local action. However, data is still insufficient to make accurate statements about the scale of urban emissions (UNHABITAT, 2011). The need of comparable emission inventories at city level, including smaller cities, is widely recognized to develop evidence-based policies accounting for the relation between emissions and institutional, socio-economic and demographic characteristics at city level. This paper presents a collection of harmonized greenhouse gases (GHG) emission inventories (the "CoM sample 2013") at municipal level directly computed by the cities and towns that participate in the EU Covenant of Mayors initiative. This is the mainstream European movement of local and regional authorities who voluntarily commit to reduce GHG emissions by 20 % or more by 2020. The "CoM sample 2013" (http://edgar.jrc.ec.europa.eu/com/data/index.php?SECURE=123, doi:10.2904/EDGARcom2013) has been carefully checked to ensure its internal consistency and its congruity with respect to internationally accepted guide values for emission factors. Overall, it provides valuable data for the analysis of the heterogeneity of final energy consumption and greenhouse gas emissions of cities.

  14. Integrating Source Apportionment Tracers into a Bottom-up Inventory of Methane Emissions in the Barnett Shale Hydraulic Fracturing Region.

    PubMed

    Townsend-Small, Amy; Marrero, Josette E; Lyon, David R; Simpson, Isobel J; Meinardi, Simone; Blake, Donald R

    2015-07-01

    A growing dependence on natural gas for energy may exacerbate emissions of the greenhouse gas methane (CH4). Identifying fingerprints of these emissions is critical to our understanding of potential impacts. Here, we compare stable isotopic and alkane ratio tracers of natural gas, agricultural, and urban CH4 sources in the Barnett Shale hydraulic fracturing region near Fort Worth, Texas. Thermogenic and biogenic sources were compositionally distinct, and emissions from oil wells were enriched in alkanes and isotopically depleted relative to natural gas wells. Emissions from natural gas production varied in δ(13)C and alkane ratio composition, with δD-CH4 representing the most consistent tracer of natural gas sources. We integrated our data into a bottom-up inventory of CH4 for the region, resulting in an inventory of ethane (C2H6) sources for comparison to top-down estimates of CH4 and C2H6 emissions. Methane emissions in the Barnett are a complex mixture of urban, agricultural, and fossil fuel sources, which makes source apportionment challenging. For example, spatial heterogeneity in gas composition and high C2H6/CH4 ratios in emissions from conventional oil production add uncertainty to top-down models of source apportionment. Future top-down studies may benefit from the addition of δD-CH4 to distinguish thermogenic and biogenic sources. PMID:26148556

  15. Prospective air pollutant emissions inventory for the development and production of unconventional natural gas in the Karoo basin, South Africa

    NASA Astrophysics Data System (ADS)

    Altieri, Katye E.; Stone, Adrian

    2016-03-01

    The increased use of horizontal drilling and hydraulic fracturing techniques to produce gas from unconventional deposits has led to concerns about the impacts to local and regional air quality. South Africa has the 8th largest technically recoverable shale gas reserve in the world and is in the early stages of exploration of this resource. This paper presents a prospective air pollutant emissions inventory for the development and production of unconventional natural gas in South Africa's Karoo basin. A bottom-up Monte Carlo assessment of nitrogen oxides (NOx = NO + NO2), particulate matter less than 2.5 μm in diameter (PM2.5), and non-methane volatile organic compound (NMVOC) emissions was conducted for major categories of well development and production activities. NOx emissions are estimated to be 68 tons per day (±42; standard deviation), total NMVOC emissions are 39 tons per day (±28), and PM2.5 emissions are 3.0 tons per day (±1.9). NOx and NMVOC emissions from shale gas development and production would dominate all other regional emission sources, and could be significant contributors to regional ozone and local air quality, especially considering the current lack of industrial activity in the region. Emissions of PM2.5 will contribute to local air quality, and are of a similar magnitude as typical vehicle and industrial emissions from a large South African city. This emissions inventory provides the information necessary for regulatory authorities to evaluate emissions reduction opportunities using existing technologies and to implement appropriate monitoring of shale gas-related activities.

  16. A high-resolution emission inventory for coal-fired power plants in China, 1990-2010

    NASA Astrophysics Data System (ADS)

    Liu, F.; He, K.; Zhang, Q.; Lei, Y.

    2012-12-01

    A new emission inventory of China's coal-fired power plants with high spatial and temporal resolution is developed for the period of 1990-2010, based on detailed unit-level information, including capacity, technology, fuel consumption, location, and the time it came into operation and shut down. The high-resolution emission inventory allows a close examination of temporal and spatial variations of power plant emissions in China and their driving forces during last two decades, and contributes to improvement of chemical transport model simulations and satellite retrieval. Emissions from China's coal-fired power plants in 2010 were estimated as follows: 8.00 Tg SO2, 9.00 Tg NOx, 3091 Tg CO2, 0.89 Tg PM2.5 and 1.39 Tg PM10, representing a growth of 92%, 306% and 484%, and a decline of 18% and 16% from 1990, respectively, compared to 558% growth of power generation during the same period. SO2 emissions were peaked in 2005 at 16.62 Tg, and then decreased by 52% between 2005 and 2010, as the subsequence of installation of flue-gas desulfurization (FGD) equipment. Although low-NOx burners (LNB) have been widely installed in power plants after 2006, it failed to curb the increase trend of NOx emissions. CO2 emissions kept increasing, but carbon emission intensity declined induced by the optimization of unit size structure. PM emissions fluctuated during the past 20 years, as a result of the interaction between emission control equipment and increased coal usage. An anomaly of monthly variations in emissions was detected during 2008-2010, reflecting the abnormity of economy and energy activity, such as financial crisis.

  17. Inverse Modeling to Improve Emission Inventory for PM10 Forecasting in East Asia Region Focusing on Korea.

    NASA Astrophysics Data System (ADS)

    Koo, Y. S.; Choi, D.; Kwon, H. Y.; Han, J.

    2014-12-01

    The aerosol transports from China and Mongolia along the Northwestern wind have large influence on the air quality in Korea and the assessment of the emission in the East Asia region is an important factor in air quality forecasting in Korea. In order to obtain working PM10 emission inventory for the PM10 forecast modeling over East Asia, the Bayesian approach with CAMx (Comprehensive Air-quality Model with extension) forward model was applied. The surface observations of PM10 from EANET (Acid Deposition Monitoring Network in East Asia), API (Air Pollution Index) sites over China and AAQMS (Ambient Air Quality Monitoring Stations) in Korea were used for the inverse modelling. The predicted PM10 concentrations with a priori emission were compared with observations at monitoring sites in China and Korea. The comparison showed that PM10 concentrations with a priori emissions were generally under-predicted. The result also indicated that anthropogenic PM10 emissions in the industrialized and urbanized areas in China were under-estimated in particular. Optimized a posteriori PM10 emissions over East Asia from inverse modelling analysis ware proposed. A posteriori PM10 emissions were much lower than the a priori emission where the soil dust emissions were prevailing. This implied that the dust emission module still had large uncertainty and it was necessary to further research on the improvement of in-line emission modelling for the soil dust. In contrast, a posteriori anthropogenic emissions from industrialized areas such as Beijing and Shenyang sites were slightly higher than a priori emission at regions. Especially, a posteriori PM10 emissions increased in Korea and in Northeast region of China. The predictions of PM10 with proposed a posteriori emission showed better agreement with the observations, implying that the inverse modelling minimized the discrepancies in the model estimation by improving PM10 emissions in East Asia. Further details of inverse modeling

  18. A new method to compare vehicle emissions measured by remote sensing and laboratory testing: high-emitters and potential implications for emission inventories.

    PubMed

    Smit, Robin; Bluett, Jeff

    2011-06-01

    A new method is presented which is designed to investigate whether laboratory test data used in the development of vehicle emission models adequately reflects emission distributions, and in particular the influence of high-emitting vehicles. The method includes the computation of a 'high-emitter' or 'emission distribution' correction factor for use in emission inventories. In order to make a valid comparison we control for a number of factors such as vehicle technology, measurement technique and driving conditions and use a variable called 'Pollution Index' (g/kg). Our investigation into one vehicle class has shown that laboratory and remote sensing data are substantially different for CO, HC and NO(x) emissions, both in terms of their distributions as well as in their mean and 99-percentile values. Given that the remote sensing data has larger mean values for these pollutants, the analysis suggests that high-emitting vehicles may not be adequately captured in the laboratory test data. The paper presents two different methods for the computation of weighted correction factors for use in emission inventories based on laboratory test data: one using mean values for six 'power bins' and one using multivariate regression functions. The computed correction factors are substantial leading to an increase for laboratory-based emission factors with a factor of 1.7-1.9 for CO, 1.3-1.6 for HC and 1.4-1.7 for NO(x) (actual value depending on the method). However, it also clear that there are points that require further examination before these correction factors should be applied. One important step will be to include a comparison with other types of validation studies such as tunnel studies and near-road air quality assessments to examine if these correction factors are confirmed. If so, we would recommend using the correction factors in emission inventories for motor vehicles.

  19. Iterative Inverse Modeling for Reconciliation of Emission Inventories during the 2006 TexAQS Intensive Field Campaign

    NASA Astrophysics Data System (ADS)

    Xiao, X.; Cohan, D. S.

    2009-12-01

    Substantial uncertainties in current emission inventories have been detected by the Texas Air Quality Study 2006 (TexAQS 2006) intensive field program. These emission uncertainties have caused large inaccuracies in model simulations of air quality and its responses to management strategies. To improve the quantitative understanding of the temporal, spatial, and categorized distributions of primary pollutant emissions by utilizing the corresponding measurements collected during TexAQS 2006, we implemented both the recursive Kalman filter and a batch matrix inversion 4-D data assimilation (FDDA) method in an iterative inverse modeling framework of the CMAQ-DDM model. Equipped with the decoupled direct method, CMAQ-DDM enables simultaneous calculation of the sensitivity coefficients of pollutant concentrations to emissions to be used in the inversions. Primary pollutant concentrations measured by the multiple platforms (TCEQ ground-based, NOAA WP-3D aircraft and Ronald H. Brown vessel, and UH Moody Tower) during TexAQS 2006 have been integrated for the use in the inverse modeling. Firstly pseudo-data analyses have been conducted to assess the two methods, taking a coarse spatial resolution emission inventory as a case. Model base case concentrations of isoprene and ozone at arbitrarily selected ground grid cells were perturbed to generate pseudo measurements with different assumed Gaussian uncertainties expressed by 1-sigma standard deviations. Single-species inversions have been conducted with both methods for isoprene and NOx surface emissions from eight states in the Southeastern United States by using the pseudo measurements of isoprene and ozone, respectively. Utilization of ozone pseudo data to invert for NOx emissions serves only for the purpose of method assessment. Both the Kalman filter and FDDA methods show good performance in tuning arbitrarily shifted a priori emissions to the base case “true” values within 3-4 iterations even for the nonlinear

  20. Research on the Emission Inventory of Major Air Pollutants in 2012 for the Sichuan City Cluster in China

    NASA Astrophysics Data System (ADS)

    Qian, J.; He, Q.

    2014-12-01

    This paper developed a high resolution emission inventory of major pollutants in city cluster of Sichuan Basin, one of the most polluted regions in China. The city cluster included five cities, which were Chengdu, Deyang, Mianyang, Meishan and Ziyang. Pollution source census and field measurements were conducted for the major emission sources such as the industry sources, on-road mobile sources, catering sources and the dust sources. The inventory results showed that in the year of 2012, the emission of SO2、NOX、CO、PM10、PM2.5、VOCs and NH3 in the region were 143.5、251.9、1659.9、299.3、163.5、464.1 and 995kt respectively. Chengdu, the provincial capital city, had the largest emission load of every pollutant among the cities. The industry sources, including power plants, fuel combustion facilities and non-combustion processes were the largest emission sources for SO2、NOX and CO, contributing to 84%, 46.5%, 35% of total SO2, NOX and CO emissions. On-road mobile sources accounted for 46.5%, 33%, 16% of the total NOx, CO, PM2.5 emissions and 28% of the anthropogenic VOCs emission. Dust and industry sources contributed to 42% and 23% of the PM10 emission with the dust sources also as the largest source of PM2.5, contributing to 27%. Anthropogenic and biogenic sources took 75% and 25% of the total VOCs emission while 36% of anthropogenic VOCs emission was owing to solvent use. Livestock contributed to 62% of NH3 emissions, followed by nitrogen fertilizer application whose contribution was 23%. Based on the developed emission inventory and local meteorological data, the regional air quality modeling system WRF-CMAQ was applied to simulate the status of PM2.5 pollution in a regional scale. The results showed that high PM2.5 concentration was distributed over the urban area of Chengdu and Deyang. On-road mobile sources and dust sources were two major contributors to the PM2.5 pollution in Chengdu, both had an contribution ratio of 27%. In Deyang, Mianyang

  1. An elaborate high resolution emission inventory of primary air pollutants for the Central Plain Urban Agglomeration of China

    NASA Astrophysics Data System (ADS)

    Qiu, Peipei; Tian, Hezhong; Zhu, Chuanyong; Liu, Kaiyun; Gao, Jiajia; Zhou, Junrui

    2014-04-01

    A high resolution emission inventory of primary air pollutants was developed based on the detailed collected activity data and the latest source-specific emission factors for the year 2010 in the Central Plain Urban Agglomeration (CPUA) region of China. The total emissions of SO2, NOx, PM10, PM2.5, CO, VOCs, and NH3 were estimated to be about 863.7 kt, 1058.2 kt, 1180.4 kt, 753.2 kt, 2854.3 kt, 466.1 kt, and 496.0 kt, respectively. Therein, power plants were demonstrated to be the largest sources for NOx, contributing about 36.1% of total emissions; industrial processes and biomass burning sources were proved to be the two major contributors of PM10, PM2.5 and VOCs emissions, together accounting for about 71.1%, 79.2% and 56.9% of the total emissions respectively. Besides, 18.4% of VOCs emissions can be explained by VOCs product-related sources. Other stationary combustion sources accounted for 57.7% of SO2 and 30.3% of CO emissions, respectively. Livestock and N-fertilizer application sources contributed about 81.0% of NH3 emissions together. Further, the emissions were spatially distributed into grid cells with a resolution of 3 km × 3 km, by using spatial allocation surrogates such as high resolution gridded population density and regional GDP. This inventory will benefit for policymakers and researchers to better understand the current situation of complex air pollution in the CPUA region of China and supply important necessary input for regional air quality modeling and policymaking.

  2. The Fire INventory from NCAR (FINN): a high resolution global model to estimate the emissions from open burning

    NASA Astrophysics Data System (ADS)

    Wiedinmyer, C.; Akagi, S. K.; Yokelson, R. J.; Emmons, L. K.; Al-Saadi, J. A.; Orlando, J. J.; Soja, A. J.

    2011-07-01

    The Fire INventory from NCAR version 1.0 (FINNv1) provides daily, 1 km resolution, global estimates of the trace gas and particle emissions from open burning of biomass, which includes wildfire, agricultural fires, and prescribed burning and does not include biofuel use and trash burning. Emission factors used in the calculations have been updated with recent data, particularly for the non-methane organic compounds (NMOC). The resulting global annual NMOC emission estimates are as much as a factor of 5 greater than some prior estimates. Chemical speciation profiles, necessary to allocate the total NMOC emission estimates to lumped species for use by chemical transport models, are provided for three widely used chemical mechanisms: SAPRC99, GEOS-CHEM, and MOZART-4. Using these profiles, FINNv1 also provides global estimates of key organic compounds, including formaldehyde and methanol. Uncertainties in the emissions estimates arise from several of the method steps. The use of fire hot spots, assumed area burned, land cover maps, biomass consumption estimates, and emission factors all introduce error into the model estimates. The uncertainty in the FINNv1 emission estimates are about a factor of two; but, the global estimates agree reasonably well with other global inventories of biomass burning emissions for CO, CO2, and other species with less variable emission factors. FINNv1 emission estimates have been developed specifically for modeling atmospheric chemistry and air quality in a consistent framework at scales from local to global. The product is unique because of the high temporal and spatial resolution, global coverage, and the number of species estimated. FINNv1 can be used for both hindcast and forecast or near-real time model applications and the results are being critically evaluated with models and observations whenever possible.

  3. A high-resolution and multi-year emissions inventory for biomass burning in Southeast Asia during 2001-2010

    NASA Astrophysics Data System (ADS)

    Shi, Yusheng; Yamaguchi, Yasushi

    2014-12-01

    Biomass burning (BB) emissions from forest fires, agricultural waste burning, and peatland combustion contain large amounts of greenhouse gases (e.g., CO2, CH4, and N2O), which significantly impact ecosystem productivity, global atmospheric chemistry, and climate change. With the help of recently released satellite products, biomass density based on satellite and observation data, and spatiotemporal variable combustion factors, this study developed a new high-resolution and multi-year emissions inventory for BB in Southeast Asia (SEA) during 2001-2010. The 1-km grid was effective for quantifying emissions from small-sized fires that were frequently misinterpreted by coarse grid data due to their large smoothed pixels. The average annual BB emissions in SEA during 2001-2010 were 277 Gg SO2, 1125 Gg NOx, 55,388 Gg CO, 3831 Gg NMVOC, 553 Gg NH3, 324 Gg BC, 2406 Gg OC, 3832 Gg CH4, 817,809 Gg CO2, and 99 Gg N2O. Emissions were high in western Myanmar, Northern Thailand, eastern Cambodia, northern Laos, and South Sumatra and South Kalimantan of Indonesia. Emissions from forest burning were the dominant contributor to the total emissions among all land types. The spatial pattern of BB emissions was consistent with that of the burned areas. In addition, BB emissions exhibited similar temporal trends from 2001 to 2010, with strong interannual and intraannual variability. Interannual and intraannual emission peaks were seen during 2004, 2007, 2010, and January-March and August-October, respectively.

  4. Quantitative comparisons of various air pollutant emission sources of ozone precursors in East Tennessee - a study evaluated from the emission inventory development

    SciTech Connect

    Bandyopadhyay, N.

    1996-12-31

    The United States Department of the Interior has raised concerns regarding air pollution impacts in the Great Smoky Mountains National Park (GSMNP). The formation of the Southern Appalachian Mountains Initiative (SAMI) is regional effort to understand the air quality impacts of emission sources upon the Appalachian Mountains. The Tennessee Division of Air Pollution Control (TDAPC) has recently committed additional resources for the analyses of proposals for increased emissions of air pollutants in East Tennessee. The TDAPC has planned to assess these effects by conducting an air quality modeling project. The United States Environmental Protection Agency`s (US EPA`s) Urban Airshed Model (UAM) has been used as the primary air quality model for this purpose. The purpose of this project will be to evaluate the expected impact of any major new or modified air pollution source located in Tennessee on ozone in the GSMNP. An accurate emission inventory is essential to any air quality modeling analysis. A modeling inventory has been developed by the TDAPC for the base year 1993. The modeling area includes 40 counties in East and Middle Tennessee and 42 counties in neighboring states. For the counties in Tennessee, a detailed inventory of the point sources was prepared. For the other states inside the modeling domain, the EPA`s Aerometric Information Retrieval System (AIRS)-AIRS Facility Subsystem (AFS) was used to obtain point source data, The accuracy of the AFS data for the other states was not addressed, A detailed quantitative analysis has been conducted with the emission inventory developed for Tennessee counties. The purpose of this study is to quantify the relative contributions of the emissions of Volatile Organic Compounds (VOCs) and Nitrogen Oxides (NO{sub x}) from different point, area, mobile and biogenic sources to ozone formation in the vicinity of the GSMNP.

  5. Advantages of city-scale emission inventory for urban air quality research and policy: the case of Nanjing, a typical industrial city in the Yangtze River Delta, China

    NASA Astrophysics Data System (ADS)

    Zhao, Y.; Qiu, L.; Xu, R.; Xie, F.; Zhang, Q.; Yu, Y.; Nielsen, C. P.; Qin, H.; Wang, H.; Wu, X.; Li, W.; Zhang, J.

    2015-07-01

    With most eastern Chinese cities facing major air quality challenges, there is a strong need for city-scale emission inventories for use in both chemical transport modeling and the development of pollution control policies. In this paper, a high-resolution emission inventory of air pollutants and CO2 for Nanjing, a typical large city in the Yangtze River Delta, is developed incorporating the best available information on local sources. Emission factors and activity data at the unit or facility level are collected and compiled using a thorough onsite survey of major sources. Over 900 individual plants, which account for 97 % of the city's total coal consumption, are identified as point sources, and all of the emission-related parameters including combustion technology, fuel quality, and removal efficiency of air pollution control devices (APCD) are analyzed. New data-collection approaches including continuous emission monitoring systems and real-time monitoring of traffic flows are employed to improve spatiotemporal distribution of emissions. Despite fast growth of energy consumption between 2010 and 2012, relatively small inter-annual changes in emissions are found for most air pollutants during this period, attributed mainly to benefits of growing APCD deployment and the comparatively strong and improving regulatory oversight of the large point sources that dominate the levels and spatial distributions of Nanjing emissions overall. The improvement of this city-level emission inventory is indicated by comparisons with observations and other inventories at larger spatial scale. Relatively good spatial correlations are found for SO2, NOx, and CO between the city-scale emission estimates and concentrations at 9 state-opertated monitoring sites (R = 0.58, 0.46, and 0.61, respectively). The emission ratios of specific pollutants including BC to CO, OC to EC, and CO2 to CO compare well to top-down constraints from ground observations. The inter-annual variability and

  6. Development of a road transport emission inventory for Greece and the Greater Athens Area: effects of important parameters.

    PubMed

    Fameli, K M; Assimakopoulos, V D

    2015-02-01

    Traffic is considered one of the major polluting sectors and as a consequence a significant cause for the measured exceedances of ambient air quality limit values mainly in urban areas. The Greater Athens Area (located in Attica), the most populated area in Greece, faces severe air pollution problems due to the combination of high road traffic emissions, complex topography and local meteorological conditions. Even though several efforts were made to construct traffic emission inventories for Greece and Attica, still there is not a spatially and temporally resolved one, based on data from relevant authorities and organisations. The present work aims to estimate road emissions in Greece and Attica based on the top down approach. The programme COPERT 4 was used to calculate the annual total emissions from the road transport sector for the period 2006-2010 and an emission inventory for Greece and Attica was developed with high spatial (6 × 6 km(2) for Greece and 2 × 2 km(2) for Attica) and temporal (1-hour) resolutions. The results revealed that about 40% of national CO₂, CO, VOC and NMVOC values and 30% of NOx and particles are emitted in Attica. The fuel consumption and the subsequent reduction of annual mileage driven in combination with the import of new engine anti-pollution technologies affected CO₂, CO, VOC and NMVOC emissions. The major part of CO (56.53%) and CO₂ (66.15%) emissions was due to passenger cars (2010), while heavy duty vehicles (HDVs) were connected with NOx, PM₂.₅ and PM₁₀ emissions with 51.27%, 43.97% and 38.13% respectively (2010). The fleet composition, the penetration of diesel fuelled cars, the increase of urban average speed and the fleet renewal are among the most effective parameters towards the emission reduction strategies. PMID:25461080

  7. Development of a road transport emission inventory for Greece and the Greater Athens Area: effects of important parameters.

    PubMed

    Fameli, K M; Assimakopoulos, V D

    2015-02-01

    Traffic is considered one of the major polluting sectors and as a consequence a significant cause for the measured exceedances of ambient air quality limit values mainly in urban areas. The Greater Athens Area (located in Attica), the most populated area in Greece, faces severe air pollution problems due to the combination of high road traffic emissions, complex topography and local meteorological conditions. Even though several efforts were made to construct traffic emission inventories for Greece and Attica, still there is not a spatially and temporally resolved one, based on data from relevant authorities and organisations. The present work aims to estimate road emissions in Greece and Attica based on the top down approach. The programme COPERT 4 was used to calculate the annual total emissions from the road transport sector for the period 2006-2010 and an emission inventory for Greece and Attica was developed with high spatial (6 × 6 km(2) for Greece and 2 × 2 km(2) for Attica) and temporal (1-hour) resolutions. The results revealed that about 40% of national CO₂, CO, VOC and NMVOC values and 30% of NOx and particles are emitted in Attica. The fuel consumption and the subsequent reduction of annual mileage driven in combination with the import of new engine anti-pollution technologies affected CO₂, CO, VOC and NMVOC emissions. The major part of CO (56.53%) and CO₂ (66.15%) emissions was due to passenger cars (2010), while heavy duty vehicles (HDVs) were connected with NOx, PM₂.₅ and PM₁₀ emissions with 51.27%, 43.97% and 38.13% respectively (2010). The fleet composition, the penetration of diesel fuelled cars, the increase of urban average speed and the fleet renewal are among the most effective parameters towards the emission reduction strategies.

  8. INVENTORY OF U.S. GREENHOUSE GAS EMISSIONS AND SINKS 1990-2011

    EPA Science Inventory

    The Environmental Protection Agency submits the U.S. greenhouse gas inventory as an annual reporting requirement under UNFCCC, which the United States and other developed countries signed June 1992 at the Rio Earth Summit. The EPA has submitted the greenhouse gas inventory to the...

  9. A comprehensive emission inventory of biogenic volatile organic compounds in Europe: improved seasonality and land-cover

    NASA Astrophysics Data System (ADS)

    Oderbolz, D. C.; Aksoyoglu, S.; Keller, J.; Barmpadimos, I.; Steinbrecher, R.; Skjøth, C. A.; Plaß-Dülmer, C.; Prévôt, A. S. H.

    2013-02-01

    Biogenic volatile organic compounds (BVOC) emitted from vegetation are important for the formation of secondary pollutants such as ozone and secondary organic aerosols (SOA) in the atmosphere. Therefore, BVOC emission are an important input for air quality models. To model these emissions with high spatial resolution, the accuracy of the underlying vegetation inventory is crucial. We present a BVOC emission model that accommodates different vegetation inventories and uses satellite-based measurements of greenness instead of pre-defined vegetation periods. This approach to seasonality implicitly treats effects caused by water or nutrient availability, altitude and latitude on a plant stand. Additionally, we test the influence of proposed seasonal variability in enzyme activity on BVOC emissions. In its present setup, the emission model calculates hourly emissions of isoprene, monoterpenes, sesquiterpenes and the oxygenated volatile organic compounds (OVOC) methanol, formaldehyde, formic acid, ethanol, acetaldehyde, acetone and acetic acid. In this study, emissions based on three different vegetation inventories are compared with each other and diurnal and seasonal variations in Europe are investigated for the year 2006. Two of these vegetation inventories require information on tree-cover as an input. We compare three different land-cover inventories (USGS GLCC, GLC2000 and Globcover 2.2) with respect to tree-cover. The often-used USGS GLCC land-cover inventory leads to a severe reduction of BVOC emissions due to a potential miss-attribution of broad-leaved trees and reduced tree-cover compared to the two other land-cover inventories. To account for uncertainties in the land-cover classification, we introduce land-cover correction factors for each relevant land-use category to adjust the tree-cover. The results are very sensitive to these factors within the plausible range. For June 2006, total monthly BVOC emissions decreased up to -27% with minimal and increased

  10. High-resolution historical emission inventories of crop residue burning in fields in China for the period 1990-2013

    NASA Astrophysics Data System (ADS)

    Li, Jing; Li, Yaqi; Bo, Yu; Xie, Shaodong

    2016-08-01

    High-resolution historical emission inventories of crop residue burning in fields in China were developed for the period 1990-2013. More accurate time-varying statistical data and locally observed emission factors were utilized to estimate crop residue open burning emissions at provincial level. Then pollutants emissions were allocated to a high spatial resolution of 10 km × 10 km and a high temporal resolution of 1 day based on the Moderate Resolution Imaging Spectroradiometer (MODIS) Fire Product (MOD/MYD14A1). Results show that China's CO emissions have increased by 5.67 times at an annual average rate of 24% from 1.06 Tg in 1990 to 7.06 Tg in 2013; the emissions of CO2, CH4, NMVOCs, N2O, NOx, NH3, SO2, PM2.5, OC, and BC have increased by 595%, 500%, 608%, 584%, 600%, 600%, 543%, 571%, 775%, and 500%, respectively, over the past 24 years. Spatially, the regions with high emissions had been notable expanding over the years, especially in the central eastern districts, the Northeastern of China, and the Sichuan Basin. Strong temporal pattern were observed with the highest emissions in June, followed by March to May and October. This work provides a better understanding of the spatiotemporal representation of agricultural fire emissions in China and can benefit both air quality modeling and management with improved accuracy.

  11. The biogenic volatile organic compounds emission inventory in France: application to plant ecosystems in the Berre-Marseilles area (France).

    PubMed

    Simon, Valérie; Dumergues, Laurent; Ponche, Jean-Luc; Torres, Liberto

    2006-12-15

    An inventory describing the fluxes of volatile organic compounds (VOCs), isoprene and monoterpenes, and other VOCs (OVOCs) from the biosphere to the atmosphere, has been constructed within the framework of the ESCOMPTE project (fiEld experimentS to COnstrain Models of atmospheric Pollution and Transport of Emissions). The area concerned, located around Berre-Marseilles, is a Mediterranean region frequently subject to high ozone concentrations. The inventory has been developed using a fine scale land use database for the year 1999, forest composition statistics, emission potentials from individual plant species, biomass distribution, temperature and light intensity. The seasonal variations in emission potentials and biomass were also taken into account. Hourly meteorological data for 1999 were calculated from ALADIN data and these were used to predict the hourly isoprene, monoterpene and OVOC fluxes for the area on a 1 kmx1 km spatial grid. Estimates of annual biogenic isoprene, monoterpene and OVOC fluxes for the reference year 1999 were 20.6, 38.9 and 13.3 kt, respectively, Quercus pubescens, Quercus ilex, Pinus halepensis and garrigue vegetation are the dominant emitting species of the area. VOC emissions from vegetation in this region contribute approximately 94% to the NMVOC (non-methane volatile organic compounds) of natural origin and are of the same order of magnitude as NMVOC emissions from anthropogenic sources. These results complete the global ESCOMPTE database needed to make an efficient strategy for tropospheric ozone reduction policy. PMID:17011024

  12. Global Xenon-133 Emission Inventory Caused by Medical Isotope Production and Derived from the Worldwide Technetium-99m Demand

    NASA Astrophysics Data System (ADS)

    Kalinowski, Martin B.; Grosch, Martina; Hebel, Simon

    2014-03-01

    Emissions from medical isotope production are the most important source of background for atmospheric radioxenon measurements, which are an essential part of nuclear explosion monitoring. This article presents a new approach for estimating the global annual radioxenon emission inventory caused by medical isotope production using the amount of Tc-99m applications in hospitals as the basis. Tc-99m is the most commonly used isotope in radiology and dominates the medical isotope production. This paper presents the first estimate of the global production of Tc-99m. Depending on the production and transport scenario, global xenon emissions of 11-45 PBq/year can be derived from the global isotope demand. The lower end of this estimate is in good agreement with other estimations which are making use of reported releases and realistic process simulations. This proves the validity of the complementary assessment method proposed in this paper. It may be of relevance for future emission scenarios and for estimating the contribution to the global source term from countries and operators that do not make sufficient radioxenon release information available. It depends on sound data on medical treatments with radio-pharmaceuticals and on technical information on the production process of the supplier. This might help in understanding the apparent underestimation of the global emission inventory that has been found by atmospheric transport modelling.

  13. A GIS based emissions inventory at 1 km × 1 km spatial resolution for air pollution analysis in Delhi, India

    NASA Astrophysics Data System (ADS)

    Guttikunda, Sarath K.; Calori, Giuseppe

    2013-03-01

    In Delhi, between 2008 and 2011, at seven monitoring stations, the daily average of particulates with diameter <2.5 μm (PM2.5) was 123 ± 87 μg m-3 and particulates with diameter <10 μm (PM10) was 208 ± 137 μg m-3. The bulk of the pollution is due to motorization, power generation, and construction activities. In this paper, we present a multi-pollutant emissions inventory for the National Capital Territory of Delhi, covering the main district and its satellite cities - Gurgaon, Noida, Faridabad, and Ghaziabad. For the base year 2010, we estimate emissions (to the nearest 000's) of 63,000 tons of PM2.5, 114,000 tons of PM10, 37,000 tons of sulfur dioxide, 376,000 tons of nitrogen oxides, 1.42 million tons of carbon monoxide, and 261,000 tons of volatile organic compounds. The inventory is further spatially disaggregated into 80 × 80 grids at 0.01° resolution for each of the contributing sectors, which include vehicle exhaust, road dust re-suspension, domestic cooking and heating, power plants, industries (including brick kilns), diesel generator sets and waste burning. The GIS based spatial inventory coupled with temporal resolution of 1 h, was utilized for chemical transport modeling using the ATMoS dispersion model. The modeled annual average PM2.5 concentrations were 122 ± 10 μg m-3 for South Delhi; 90 ± 20 μg m-3 for Gurgaon and Dwarka; 93 ± 26 μg m-3 for North-West Delhi; 93 ± 23 μg m-3 for North-East Delhi; 42 ± 10 μg m-3 for Greater Noida; 77 ± 11 μg m-3 for Faridabad industrial area. The results have been compared to measured ambient PM pollution to validate the emissions inventory.

  14. The visualization and dissemination of the Great Lakes Regional Toxic Air Emissions Inventory: Using geographic information systems and interactive Internet mapping applications

    SciTech Connect

    Conley, R.M.

    1997-12-31

    The eight Great Lakes states, the Canadian province of Ontario and the Great Lakes Commission are involved in a collective effort to develop a regional inventory of toxic air emissions for 49 targeted toxic pollutants from point and area sources. The regional inventory will soon be expanded to include emissions from mobile sources. The inventory, when aggregated for all eight states and Ontario, will eventually reside at the US Environmental Protection Agency (EPA), Great Lakes National Program Office (GLNPO). To aid in the understanding and interpretation of the inventory`s data, an effort has been undertaken to generate two map series for the entire region: (1) choropleth maps of total toxic air emissions at the county level of geography and (2) dot maps showing facility locations. To ensure an effective and efficient dissemination process among the province and various states, an interactive Internet mapping interface prototype was modified and used for the project. With an interactive online visualization tool, the inventory collectors, managers and researchers can quickly and effectively view the inventory`s data on maps, charts or spreadsheets. These graphics can be used as: (1) a QA/QC function for the inventory collectors, (2) a simple communication of complex data to support managers decision making and (3) a means for easy access to complex data and information about any geographic area in the region for the researchers or general public. This paper describes the development and use of PC Arc/Info, ArcView and MapInfo geographic information systems (GIS), mapping and Internet interfacing applications to visualize, disseminate and convey the emissions inventory data in a meaningful and useful manner. The various methods developed and implemented to convert, process and prepare the inventory data and Internet interface for use with a standard Internet web browser also are described in this paper.

  15. Sulfur hexafluoride (SF6) emission estimates for China: an inventory for 1990-2010 and a projection to 2020.

    PubMed

    Fang, Xuekun; Hu, Xia; Janssens-Maenhout, Greet; Wu, Jing; Han, Jiarui; Su, Shenshen; Zhang, Jianbo; Hu, Jianxin

    2013-04-16

    Sulfur hexafluoride (SF6) is the most potent greenhouse gas regulated under the Kyoto Protocol, with a high global warming potential. In this study, SF6 emissions from China were inventoried for 1990-2010 and projected to 2020. Results reveal that the highest SF6 emission contribution originates from the electrical equipment sector (about 70%), followed by the magnesium production sector, the semiconductor manufacture sector and the SF6 production sector (each about 10%). Both agreements and discrepancies were found in comparisons of our estimates with previously published data. An accelerated growth rate was found for Chinese SF6 emissions during 1990-2010. Because the relative growth rate of SF6 emissions is estimated to be much higher than those of CO2, CH4, and N2O, SF6 will play an increasing role in greenhouse gas emissions in China. Global contributions from China increased rapidly from 0.9 ± 0.3% in 1990 to 22.8 ± 6.3% in 2008, making China one of the crucial contributors to the recent growth in global emissions. Under the examined Business-as-usual (BAU) Scenario, projected emissions will reach 4270 ± 1020 t in 2020, but a reduction of about 90% of the projected BAU emissions would be obtained under the Alternative Scenario.

  16. Sulfur hexafluoride (SF6) emission estimates for China: an inventory for 1990-2010 and a projection to 2020.

    PubMed

    Fang, Xuekun; Hu, Xia; Janssens-Maenhout, Greet; Wu, Jing; Han, Jiarui; Su, Shenshen; Zhang, Jianbo; Hu, Jianxin

    2013-04-16

    Sulfur hexafluoride (SF6) is the most potent greenhouse gas regulated under the Kyoto Protocol, with a high global warming potential. In this study, SF6 emissions from China were inventoried for 1990-2010 and projected to 2020. Results reveal that the highest SF6 emission contribution originates from the electrical equipment sector (about 70%), followed by the magnesium production sector, the semiconductor manufacture sector and the SF6 production sector (each about 10%). Both agreements and discrepancies were found in comparisons of our estimates with previously published data. An accelerated growth rate was found for Chinese SF6 emissions during 1990-2010. Because the relative growth rate of SF6 emissions is estimated to be much higher than those of CO2, CH4, and N2O, SF6 will play an increasing role in greenhouse gas emissions in China. Global contributions from China increased rapidly from 0.9 ± 0.3% in 1990 to 22.8 ± 6.3% in 2008, making China one of the crucial contributors to the recent growth in global emissions. Under the examined Business-as-usual (BAU) Scenario, projected emissions will reach 4270 ± 1020 t in 2020, but a reduction of about 90% of the projected BAU emissions would be obtained under the Alternative Scenario. PMID:23506443

  17. 40 CFR 51.1008 - Emission inventory requirements for the PM2.5 NAAQS.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ....5 precursors. For purposes of defining the data elements for these inventories, the PM2.5 and PM2.5 precursor-relevant data element requirements under subpart A of this part shall apply. (2) Submit...

  18. Carbon emissions and resources use by Chinese economy 2007: A 135-sector inventory and input-output embodiment

    NASA Astrophysics Data System (ADS)

    Chen, G. Q.; Chen, Z. M.

    2010-11-01

    A 135-sector inventory and embodiment analysis for carbon emissions and resources use by Chinese economy 2007 is presented in this paper by an ecological input-output modeling based on the physical entry scheme. Included emissions and resources belong to six categories as: (1) greenhouse gas (GHG) in terms of CO 2, CH 4, and N 2O; (2) energy in terms of coal, crude oil, natural gas, hydropower, nuclear power, and firewood; (3) water in terms of freshwater; (4) exergy in terms of coal, crude oil, natural gas, grain, bean, tuber, cotton, peanut, rapeseed, sesame, jute, sugarcane, sugar beet, tobacco, silkworm feed, tea, fruits, vegetables, wood, bamboo, pulp, meat, egg, milk, wool, aquatic products, iron ore, copper ore, bauxite, lead ore, zinc ore, pyrite, phosphorite, gypsum, cement, nuclear fuel, and hydropower; (5) and (6) solar and cosmic emergies in terms of sunlight, wind power, deep earth heat, chemical power of rain, geopotential power of rain, chemical power of stream, geopotential power of stream, wave power, geothermal power, tide power, topsoil loss, coal, crude oil, natural gas, ferrous metal ore, non-ferrous metal ore, non-metal ore, cement, and nuclear fuel. Accounted based on the embodied intensities are carbon emissions and resources use embodied in the final use as rural consumption, urban consumption, government consumption, gross fixed capital formation, change in inventories, and export, as well as in the international trade balance. The resulted database is basic to environmental account of carbon emissions and resources use at various levels.

  19. The study of emission inventory on anthropogenic air pollutants and VOC species in the Yangtze River Delta region, China

    NASA Astrophysics Data System (ADS)

    Huang, C.; Chen, C. H.; Li, L.; Cheng, Z.; Wang, H. L.; Huang, H. Y.; Streets, D. G.; Wang, Y. J.

    2011-01-01

    The purpose of this study is to develop an emission inventory for major anthropogenic air pollutants and VOC species in the Yangtze River Delta (YRD) region for the year 2007. A "bottom-up" methodology was adopted to compile the inventory based on major emission sources in the sixteen cities of this region. Results show that the emissions of SO2, NOx, CO, PM10, PM2.5, VOCs, and NH3 in the YRD region for the year 2007 are 2391.8 kt, 2292.9 kt, 6697.1 kt, 3115.7 kt, 1510.8 kt, 2767.4 kt, and 458.9 kt, respectively. Ethylene, mp-xylene, o-xylene, toluene, and 1,2,4-trimethylbenzene, 2,4-dimethylpentane, ethyl benzene, propylene, 1-pentene, and isoprene are the key species contributing 77% to the total OFPs. The spatial distribution of the emissions shows the emissions and OFPs are mainly concentrated in the urban and industrial areas along the Yangtze River and around the Hangzhou Bay. The industrial sources including power plant, other fuel combustion facilities, and non-combustion processes contribute about 97%, 86%, 89%, 91%, and 69% of the total SO2, NOx, PM10, PM2.5, and VOC emissions. Vehicles take up 12.3% and 12.4% of the NOx and VOC emissions, respectively. Regarding OFPs, chemical industry, domestic use of paint and printing, and gasoline vehicle contribute 38.2%, 23.9%, and 11.6% to the ozone formation in the YRD region.

  20. [Analysis on Emission Inventory and Temporal-Spatial Characteristics of Pollutants from Key Coal-Fired Stationary Sources in Jiangsu Province by On-Line Monitoring Data].

    PubMed

    Zhang, Ying-jie; Kong, Shao-fei; Tang, Li-li; Zhao, Tian-liang; Han, Yong-xiang; Yu, Hong-xia

    2015-08-01

    Emission inventory of air pollutants is the key to understand the spatial and temporal distribution of atmospheric pollutants and to accurately simulate the ambient air quality. The currently established emission inventories are still limited on spatial and temporal resolution which greatly influences the numerical prediction accuracy of air quality. With coal-fired stationary sources considered, this study analyzed the total emissions and monthly variation of main pollutants from them in 2012 as the basic year, by collecting the on-line monitoring data for power plants and atmospheric verifiable accounting tables of Jiangsu Province. Emission factors in documents are summarized and adopted. Results indicated that the emission amounts of SO2, NOx, TSP, PM10, PM2.5, CO, EC, OC, NMVOC and NH3 were 106.0, 278.3, 40.9, 32.7, 21.7, 582.0, 3.6, 2.5, 17.3 and 2.2 kt, respectively. They presented monthly variation with high emission amounts in February, March, July, August and December and low emissions in September and October. The reason may be that more coal are consumed which leads to the increase of pollutants emitted, to satisfy the needs, of heat and electricity power supply in cold and hot periods. Local emission factors are needed for emission inventory studies and the monthly variation should be considered when emission inventories are used in air quality simulation. PMID:26592003

  1. [Analysis on Emission Inventory and Temporal-Spatial Characteristics of Pollutants from Key Coal-Fired Stationary Sources in Jiangsu Province by On-Line Monitoring Data].

    PubMed

    Zhang, Ying-jie; Kong, Shao-fei; Tang, Li-li; Zhao, Tian-liang; Han, Yong-xiang; Yu, Hong-xia

    2015-08-01

    Emission inventory of air pollutants is the key to understand the spatial and temporal distribution of atmospheric pollutants and to accurately simulate the ambient air quality. The currently established emission inventories are still limited on spatial and temporal resolution which greatly influences the numerical prediction accuracy of air quality. With coal-fired stationary sources considered, this study analyzed the total emissions and monthly variation of main pollutants from them in 2012 as the basic year, by collecting the on-line monitoring data for power plants and atmospheric verifiable accounting tables of Jiangsu Province. Emission factors in documents are summarized and adopted. Results indicated that the emission amounts of SO2, NOx, TSP, PM10, PM2.5, CO, EC, OC, NMVOC and NH3 were 106.0, 278.3, 40.9, 32.7, 21.7, 582.0, 3.6, 2.5, 17.3 and 2.2 kt, respectively. They presented monthly variation with high emission amounts in February, March, July, August and December and low emissions in September and October. The reason may be that more coal are consumed which leads to the increase of pollutants emitted, to satisfy the needs, of heat and electricity power supply in cold and hot periods. Local emission factors are needed for emission inventory studies and the monthly variation should be considered when emission inventories are used in air quality simulation.

  2. Emissions of biogenic VOC from forest ecosystems in central Europe: estimation and comparison with anthropogenic emission inventory.

    PubMed

    Zemankova, Katerina; Brechler, Josef

    2010-02-01

    This paper describes a method of estimating emission fluxes of biogenic volatile organic compounds (BVOCs) based on the approach proposed by Guenther et al. (1995) and the high-resolution Corine land-cover 2000 database (1x1km resolution). The computed emission fluxes for the Czech Republic (selected for analysis as being representative of a heavily cultivated, central European country) are compared with anthropogenic emissions, both for the entire country and for individual administrative regions. In some regions, BVOC emissions are as high as anthropogenic emissions; however, in most regions the BVOC emissions are approximately 50% of the anthropogenic emissions. The yearly course of BVOC emissions (represented by monoterpenes and isoprene) is presented, along with the spatial distribution of annual mean values. Differences in emission distributions during winter (January) and summer (June) are also considered. PMID:19773106

  3. Eddy Covariance Flux Measurements of Pollutant Gases in the Mexico City Urban Area: a Useful Technique to Evaluate Emissions inventories

    NASA Astrophysics Data System (ADS)

    Velasco, E.; Grivicke, R.; Pressley, S.; Allwine, G.; Jobson, T.; Westberg, H.; Lamb, B.; Ramos, R.; Molina, L.

    2007-12-01

    Direct measurements of emissions of pollutant gases that include all major and minor emissions sources in urban areas are a missing requirement to improve and evaluate emissions inventories. The quality of an urban emissions inventory relies on the accuracy of the information of anthropogenic activities, which in many cases is not available, in particular in urban areas of developing countries. As part of the MCMA-2003 field campaign, we demonstrated the feasibility of using eddy covariance (EC) techniques coupled with fast-response sensors to measure fluxes of volatile organic compounds (VOCs) and CO2 from a residential district of Mexico City. Those flux measurements demonstrated to be also a valuable tool to evaluate the emissions inventory used for air quality modeling. With the objective to confirm the representativeness of the 2003 flux measurements in terms of magnitude, composition and diurnal distribution, as well to evaluate the most recent emissions inventory, a second flux system was deployed in a different district of Mexico City during the 2006 MILAGRO field campaign. This system was located in a busy district surrounded by congested avenues close to the center of the city. In 2003 and 2006 fluxes of olefins and CO2 were measured by the EC technique using a Fast Isoprene Sensor calibrated with a propylene standard and an open path Infrared Gas Analyzer (IRGA), respectively. Fluxes of aromatic and oxygenated VOCs were analyzed by Proton Transfer Reaction-Mass Spectroscopy (PTR-MS) and the disjunct eddy covariance (DEC) technique. In 2006 the number of VOCs was extended using a disjunct eddy accumulation (DEA) system. This system collected whole air samples as function of the direction of the vertical wind component, and the samples were analyzed on site by gas chromatography / flame ionization detection (GC-FID). In both studies we found that the urban surface is a net source of CO2 and VOCs. The diurnal patterns were similar, but the 2006 fluxes

  4. A novel approach to produce road-level inventories of on-road greenhouse gas and air pollutant emissions

    NASA Astrophysics Data System (ADS)

    Powell, J.; Butenhoff, C. L.

    2015-12-01

    Emissions inventories are an important tool often built by governments tomanage and assess greenhouse gases and other air pollutants. High resolutioninventories, both in space and time, are necessary to capture localcharacteristics of on-road transportation emissions in particular. Emissionsvary widely due to the local nature of the fleet, fuel, and roads and thisheterogeneity must inform effective emissions modeling on the urban level. Inaddition, widespread availability of low-cost computing now makes highresolution climate and air quality modeling feasible, but efforts to improveinventories have not kept pace. There currently is a lack of inventories atcomparable resolutions. This motivated similar work such as the VULCAN projectwhich used county-level data to estimate on-road emissions. We are motivatedto improve upon this by using site-level traffic count data where available.Here we show a new high resolution model of CO2 emissions for the Portland,OR metropolitan region. The backbone is an archive of traffic counterrecordings taken by the Portland Bureau of Transportation intermittently at9,352 sites over 21 years and continuing today (1986-2006 data are summarizedhere) and by The Portland Regional Transportation Archive Listing at 309freeway sites. We constructed a regression model to fill in traffic networkgaps using GIS data such as road class and population density. After stepwisetesting of each of eighteen road classes (from minor streets to freeway), wewere able to select ten variables that are significant (P < 0.001) predictorsof traffic; particularly freeway, unimproved road, and minor streets. Themodel was tested by holding back one-third of the data. The R2 for the linearmodel (based on road class and land use) is 0.84. The EPA MOVES model was thenused to estimate transportation CO2 emissions using local fleet, traffic, andmeteorology data.

  5. High-resolution inventory of technologies, activities, and emissions of coal-fired power plants in China from 1990 to 2010

    NASA Astrophysics Data System (ADS)

    Liu, F.; Zhang, Q.; Tong, D.; Zheng, B.; Li, M.; Huo, H.; He, K. B.

    2015-07-01

    This paper, which focuses on emissions from China's coal-fired power plants during 1990-2010, is the second in a series of papers that aims to develop high-resolution emission inventory for China. This is the first time that emissions from China's coal-fired power plants were estimated at unit level for a 20 year period. This inventory is constructed from a unit-based database compiled in this study, named the China coal-fired Power plant Emissions Database (CPED), which includes detailed information on the technologies, activity data, operation situation, emission factors, and locations of individual units and supplements with aggregated data where unit-based information is not available. Between 1990 and 2010, compared to a 479 % growth in coal consumption, emissions from China's coal-fired power plants increased by 56, 335 and 442 % for SO2, NOx and CO2, respectively, and decreased by 23 % for PM2.5. Driven by the accelerated economy growth, large power plants were constructed throughout the country after 2000, resulting in dramatic growth in emissions. Growth trend of emissions has been effective curbed since 2005 due to strengthened emission control measures including the installation of flue-gas desulfurization (FGD) systems and the optimization of the generation fleet mix by promoting large units and decommissioning small ones. Compared to previous emission inventories, CPED significantly improved the spatial resolution and temporal profile of power plant emission inventory in China by extensive use of underlying data at unit level. The new inventory developed in this study will enable a close examination for temporal and spatial variations of power plant emissions in China and will help to improve the performances of chemical transport models by providing more accurate emission data.

  6. High-resolution inventory of technologies, activities, and emissions of coal-fired power plants in China from 1990 to 2010

    NASA Astrophysics Data System (ADS)

    Liu, F.; Zhang, Q.; Tong, D.; Zheng, B.; Li, M.; Huo, H.; He, K. B.

    2015-12-01

    This paper, which focuses on emissions from China's coal-fired power plants during 1990-2010, is the second in a series of papers that aims to develop a high-resolution emission inventory for China. This is the first time that emissions from China's coal-fired power plants were estimated at unit level for a 20-year period. This inventory is constructed from a unit-based database compiled in this study, named the China coal-fired Power plant Emissions Database (CPED), which includes detailed information on the technologies, activity data, operation situation, emission factors, and locations of individual units and supplements with aggregated data where unit-based information is not available. Between 1990 and 2010, compared to a 479 % growth in coal consumption, emissions from China's coal-fired power plants increased by 56, 335, and 442 % for SO2, NOx, and CO2, respectively, and decreased by 23 and 27 % for PM2.5 and PM10 respectively. Driven by the accelerated economic growth, large power plants were constructed throughout the country after 2000, resulting in a dramatic growth in emissions. The growth trend of emissions has been effectively curbed since 2005 due to strengthened emission control measures including the installation of flue gas desulfurization (FGD) systems and the optimization of the generation fleet mix by promoting large units and decommissioning small ones. Compared to previous emission inventories, CPED significantly improved the spatial resolution and temporal profile of the power plant emission inventory in China by extensive use of underlying data at unit level. The new inventory developed in this study will enable a close examination of temporal and spatial variations of power plant emissions in China and will help to improve the performances of chemical transport models by providing more accurate emission data.

  7. Highlighting Uncertainty and Recommendations for Improvement of Black Carbon Biomass Fuel-Based Emission Inventories in the Indo-Gangetic Plain Region.

    PubMed

    Soneja, Sutyajeet I; Tielsch, James M; Khatry, Subarna K; Curriero, Frank C; Breysse, Patrick N

    2016-03-01

    Black carbon (BC) is a major contributor to hydrological cycle change and glacial retreat within the Indo-Gangetic Plain (IGP) and surrounding region. However, significant variability exists for estimates of BC regional concentration. Existing inventories within the IGP suffer from limited representation of rural sources, reliance on idealized point source estimates (e.g., utilization of emission factors or fuel-use estimates for cooking along with demographic information), and difficulty in distinguishing sources. Inventory development utilizes two approaches, termed top down and bottom up, which rely on various sources including transport models, emission factors, and remote sensing applications. Large discrepancies exist for BC source attribution throughout the IGP depending on the approach utilized. Cooking with biomass fuels, a major contributor to BC production has great source apportionment variability. Areas requiring attention tied to research of cookstove and biomass fuel use that have been recognized to improve emission inventory estimates include emission factors, particulate matter speciation, and better quantification of regional/economic sectors. However, limited attention has been given towards understanding ambient small-scale spatial variation of BC between cooking and non-cooking periods in low-resource environments. Understanding the indoor to outdoor relationship of BC emissions due to cooking at a local level is a top priority to improve emission inventories as many health and climate applications rely upon utilization of accurate emission inventories.

  8. Source apportionment vs. emission inventories of non-methane hydrocarbons (NMHC) in an urban area of the Middle East: local and global perspectives

    NASA Astrophysics Data System (ADS)

    Salameh, Thérèse; Sauvage, Stéphane; Afif, Charbel; Borbon, Agnès; Locoge, Nadine

    2016-03-01

    We applied the positive matrix factorization model to two large data sets collected during two intensive measurement campaigns (summer 2011 and winter 2012) at a sub-urban site in Beirut, Lebanon, in order to identify NMHC (non-methane hydrocarbons) sources and quantify their contribution to ambient levels. Six factors were identified in winter and five factors in summer. PMF-resolved source profiles were consistent with source profiles established by near-field measurements. The major sources were traffic-related emissions (combustion and gasoline evaporation) in winter and in summer accounting for 51 and 74 wt %, respectively, in agreement with the national emission inventory. The gasoline evaporation related to traffic source had a significant contribution regardless of the season (22 wt % in winter and 30 wt % in summer). The NMHC emissions from road transport are estimated from observations and PMF results, and compared to local and global emission inventories. The PMF analysis finds reasonable differences on emission rates, of 20-39 % higher than the national road transport inventory. However, global inventories (ACCMIP, EDGAR, MACCity) underestimate the emissions up to a factor of 10 for the transportation sector. When combining emission inventory to our results, there is strong evidence that control measures in Lebanon should be targeted on mitigating the NMHC emissions from the traffic-related sources. From a global perspective, an assessment of VOC (volatile organic compounds) anthropogenic emission inventories for the Middle East region as a whole seems necessary as these emissions could be much higher than expected at least from the road transport sector.

  9. Analysis of the emission inventories and model-ready emission datasets of Europe and North America for phase 2 of the AQMEII project

    NASA Astrophysics Data System (ADS)

    Pouliot, George; Denier van der Gon, Hugo A. C.; Kuenen, Jeroen; Zhang, Junhua; Moran, Michael D.; Makar, Paul A.

    2015-08-01

    This paper highlights the development of the emission inventories and emission processing for Europe (EU) and North America (NA) in the second phase of the Air Quality Model Evaluation International Initiative (AQMEII) project. The main purpose of the second phase of the AQMEII project is to understand the importance of coupled meteorological-chemical models in our understanding of the feedback of chemistry on the meteorology. A second purpose of the second phase of the AQMEII project is to explore the differences between EU and NA in a dynamic evaluation of two modeling years (2006 and 2010). The first phase of AQMEII also considered the modeling year 2006. Comparing the two AQMEII phases, for the EU domain, there were substantial decreases in CO (-19%), NH3 (-11%), and SO2 (-12%) emissions between the phase 2 and phase 1 emissions used for 2006. For the NA domain, there were decreases in CO (-10%), non-methane hydrocarbons (-5%), PM2.5 (-8%), PM10 (-18%), SO2 (-12%), with an increase of 4% in NOx. For the 2010 modeling year, 2009 emissions were used as a proxy for 2010 emissions in the EU domain. Between 2006 and 2009, considerable emission reductions were achieved for 17 EU countries, Norway and Switzerland as well as EU-Non-Member States, for all emitted species aside from NH3, which remained almost stable. Non-EU countries showed little change in emissions levels, though this may be a result of poor data quality. Shipping emissions decreased for PM and SO2 due to Sulfur Emission Control Areas on the North Sea and the Baltic Sea, while increasing for other species. Overall for the EU domain between 2006 and 2009, estimated NOx emissions decreased by 10%, SO2 by 18%, CO by 12%, PM2.5 by 5%, PM10 by 6%, NMVOC by 11%, and NH3 by 1%. Between the 2006 and 2010 modeling years, estimated US NOx emissions decreased by 17%, SO2 by 29%, CO by 21%, PM2.5 by 12%, PM10 by 7%, NMHC by 4% and NH3 by 2% while Canadian and Mexican emissions were assumed to remain constant

  10. High resolution inventory of re-estimating ammonia emissions from agricultural fertilizer in China from 1978 to 2008

    NASA Astrophysics Data System (ADS)

    Xu, P.; Lin, Y. H.; Liao, Y. J.; Zhao, C. X.; Wang, G. S.; Luan, S. J.

    2015-09-01

    The quantification of ammonia (NH3) emissions is essential to the more accurate quantification of atmospheric nitrogen deposition, improved air quality and the assessment of ammonia-related agricultural policy and climate mitigation strategies. The quantity, geographic distribution and historical trends of these emissions remain largely uncertain. In this paper, a new Chinese agricultural fertilizer NH3 (CAF_NH3) emissions inventory has been compiled that exhibits the following improvements: (1) a 1 km × 1 km gridded map on the county level was developed for 2008, (2) a combined bottom-up and top-down method was used for the local correction of emission factors (EFs) and parameters, (3) the spatial and temporal patterns of historical time trends for 1978-2008 were estimated and the uncertainties were quantified for the inventories, and (4) a sensitivity test was performed in which a province-level disaggregated map was compared with CAF_NH3 emissions for 2008. The total CAF_NH3 emissions for 2008 were 8.4 Tg NH3 yr-1 (a 6.6-9.8 Tg interquartile range). From 1978 to 2008, annual NH3 emissions fluctuated with three peaks (1987, 1996 and 2005), and total emissions increased from 3.2 to 8.4 Tg at an annual rate of 3.0 %. During the study period, the contribution of livestock manure spreading increased from 37.0 to 45.5 % because of changing fertilization practices and the rapid increase in egg, milk and meat consumption. The average contribution of synthetic fertilizer, which has a positive effect on crop yields, was approximately 38.3 % (minimum: 33.4 %; maximum: 42.7 %). With rapid urbanization causing a decline in the rural population, the contribution of the rural excrement sector varied widely between 20.3 and 8.5 %. The average contributions of cake fertilizer and straw returning were approximately 3.8 and 4.5 %, respectively, thus small and stable. Collectively, the CAF_NH3 emissions reflect the nation's agricultural policy to a certain extent. An effective

  11. Estimate of sulfur, arsenic, mercury, fluorine emissions due to spontaneous combustion of coal gangue: An important part of Chinese emission inventories.

    PubMed

    Wang, Shaobin; Luo, Kunli; Wang, Xing; Sun, Yuzhuang

    2016-02-01

    A rough estimate of the annual amount of sulfur, arsenic, mercury and fluoride emission from spontaneous combustion of coal gangue in China was determined. The weighted mean concentrations of S, As, Hg, and F in coal gangue are 1.01%, 7.98, 0.18, and 365.54 mg/kg, respectively. Amounts of S, As, Hg, and F emissions from coal gangue spontaneous combustion show approximately 1.13 Mt, and 246, 45, and 63,298 tons in 2013, respectively. The atmospheric release amount of sulfur from coal gangue is more than one tenth of this from coal combustion, and the amounts of As, Hg, and F are close to or even exceed those from coal combustion. China's coal gangue production growth from 1992 to 2013 show an obvious growth since 2002. It may indicate that Chinese coal gangue has become a potential source of air pollution, which should be included in emission inventories.

  12. Assessment of China's virtual air pollution transport embodied in trade by using a consumption-based emission inventory

    NASA Astrophysics Data System (ADS)

    Zhao, H. Y.; Zhang, Q.; Guan, D. B.; Davis, S. J.; Liu, Z.; Huo, H.; Lin, J. T.; Liu, W. D.; He, K. B.

    2015-05-01

    Substantial anthropogenic emissions from China have resulted in serious air pollution, and this has generated considerable academic and public concern. The physical transport of air pollutants in the atmosphere has been extensively investigated; however, understanding the mechanisms how the pollutant was transferred through economic and trade activities remains a challenge. For the first time, we quantified and tracked China's air pollutant emission flows embodied in interprovincial trade, using a multiregional input-output model framework. Trade relative emissions for four key air pollutants (primary fine particle matter, sulfur dioxide, nitrogen oxides and non-methane volatile organic compounds) were assessed for 2007 in each Chinese province. We found that emissions were significantly redistributed among provinces owing to interprovincial trade. Large amounts of emissions were embodied in the imports of eastern regions from northern and central regions, and these were determined by differences in regional economic status and environmental policy. It is suggested that measures should be introduced to reduce air pollution by integrating cross-regional consumers and producers within national agreements to encourage efficiency improvement in the supply chain and optimize consumption structure internationally. The consumption-based air pollutant emission inventory developed in this work can be further used to attribute pollution to various economic activities and final demand types with the aid of air quality models.

  13. Mobile Laboratory Measurements of Black Carbon and Polycyclic Aromatic Hydrocarbon Emissions in Mexico City: A New Method for Motor Vehicle Emission Inventory Calculations

    NASA Astrophysics Data System (ADS)

    Jiang, M.; Marr, L. C.; Dunlea, E.; Herndon, S.; Jayne, J.; Rogers, T.; Knighton, B.; Zavala, M.; Molina, L. T.; Molina, M. J.

    2004-12-01

    Aerosol black carbon (BC) and polycyclic aromatic hydrocarbons (PAHs) are two products of carbonaceous fuel combustion that are of major concern for urban air quality and global climate change. As part of the Mexico City Metropolitan Area field campaign in April 2003 (MCMA-2003), a mobile laboratory drove throughout the city and chased vehicles to measure pollutants in their exhaust emissions. The laboratory is a van designed and built by Aerodyne Research, Inc. and is equipped with a suite of gas and particle analyzers, including an aethalometer that measures BC and a photoemission aerosol sensor that measures particle-bound PAHs. The main goal of this research is to determine fuel-based emission factors, or the mass of BC and PAH emitted per volume of fuel burned, for Mexico City¡_s vehicle fleet. We can then calculate the megacity¡_s emission inventory of these compounds, which is important on both the urban and global scales. In previous analyses, the mobile laboratory has been used to target emissions from specific vehicles. While chasing events can be analyzed to obtain emission factors for specific vehicles, data from the entire time period while the lab is driving through the streets, whether chasing individual vehicles or not, can also provide valuable information about mobile source emissions. The laboratory continuously samples ambient air from an inlet at the front of the van, and it is always ¡°seeing¡± exhaust plumes from the vehicles around it. This ¡°macroscopic¡± approach that considers all vehicles on the road, similar to tunnel and remote sensing studies, complements the ¡°microscopic¡± approach that focuses on individual vehicles. We have developed a method that automatically identifies exhaust plumes and quantifies emission factors from data collected by the mobile lab. While 200 individual chasing events were identified during the field campaign, over 40,000 exhaust plume points were identified using the macroscopic approach. The

  14. Evaluation of black carbon emission inventories using a Lagrangian dispersion model - a case study over Southern India

    NASA Astrophysics Data System (ADS)

    Gadhavi, H. S.; Renuka, K.; Kiran, V. Ravi; Jayaraman, A.; Stohl, A.; Klimont, Z.; Beig, G.

    2014-10-01

    We evaluated three emission inventories of black carbon (BC) using Lagrangian particle dispersion model simulations and BC observations from a rural site in Southern India (Gadanki; 13.48° N, 79.18° E) from 2008 to 2012. We found that 93 to 95% of the BC load at the observation site originated from emissions in India and the rest from the neighbouring countries and shipping. A substantial fraction (33 to 43%) of the BC was transported from Northern India. Wet deposition is found to play a minor role in reducing BC mass at the site because of its proximity to BC sources during rainy season and relatively short rainy season over western and northern parts of India. Seasonally, the highest BC concentration (approx. 3.3 μg m-3) is observed during winter, followed by spring (approx. 2.8 μg m-3). While the model reproduced well the seasonal cycle, the modelled BC concentrations are significantly lower than observed values, especially in spring. The model bias is correlated to fire radiative power - a proxy of open biomass burning activity. Using potential emission sensitivity maps derived using the model, we suggest that underestimation of BC mass in the model during spring is due to the underestimation of BC fluxes over Southern India (possibly from open-biomass-burning/forest-fires). The overall performance of the model simulations using three different emission inventories (SAFAR-India, ECLIPSE and RETRO) is similar, with ECLIPSE and SAFAR-India performing marginally better as both have about 30% higher emissions for India than RETRO. The ratio of observed to modelled annual mean BC concentration was estimated as 1.5 for SAFAR, 1.7 for ECLIPSE and 2.4 for RETRO.

  15. Evaluation of black carbon emission inventories using a Lagrangian dispersion model - a case study over southern India

    NASA Astrophysics Data System (ADS)

    Gadhavi, H. S.; Renuka, K.; Kiran, V. Ravi; Jayaraman, A.; Stohl, A.; Klimont, Z.; Beig, G.

    2015-02-01

    We evaluated three emission inventories of black carbon (BC) using Lagrangian particle dispersion model simulations and BC observations from a rural site in southern India (Gadanki; 13.48° N, 79.18° E) from 2008 to 2012. We found that 93 to 95% of the BC load at the observation site originated from emissions in India and the rest from the neighbouring countries and shipping. A substantial fraction (33 to 43%) of the BC was transported from northern India. Wet deposition is found to play a minor role in reducing BC mass at the site because of its proximity to BC sources during rainy season and relatively short rainy season over western and northern parts of India. Seasonally, the highest BC concentration (approx. 3.3 μg m-3) is observed during winter, followed by spring (approx. 2.8 μg m-3). While the model reproduced well the seasonal cycle, the modelled BC concentrations are significantly lower than observed values, especially in spring. The model bias is correlated to fire radiative power - a proxy of open biomass burning activity. Using potential emission sensitivity maps derived using the model, we suggest that underestimation of BC mass in the model during spring is due to the underestimation of BC fluxes over southern India (possibly from open-biomass-burning/forest-fires). The overall performance of the model simulations using three different emission inventories (SAFAR-India, ECLIPSE and RETRO) is similar, with ECLIPSE and SAFAR-India performing marginally better as both have about 30% higher emissions for India than RETRO. The ratio of observed to modelled annual mean BC concentration was estimated as 1.5 for SAFAR, 1.7 for ECLIPSE and 2.4 for RETRO.

  16. 75 FR 12232 - Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2008

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-15

    ... recommended by the Intergovernmental Panel on Climate Change (IPCC), and reported in a format consistent with the United Nations Framework Convention on Climate Change (UNFCCC) reporting guidelines. The Inventory... Protection Agency, Climate Change Division (6207J), 1200 Pennsylvania Ave., NW., Washington, DC 20460,...

  17. 78 FR 12310 - Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2011

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-22

    ... recommended by the Intergovernmental Panel on Climate Change (IPCC), and reported in a format consistent with the United Nations Framework Convention on Climate Change (UNFCCC) reporting guidelines. The Inventory... Protection Agency, Climate Change Division (6207J), 1200 Pennsylvania Ave., NW., Washington, DC 20460,...

  18. 76 FR 10026 - Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2009

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-23

    ... recommended by the Intergovernmental Panel on Climate Change (IPCC), and reported in a format consistent with the United Nations Framework Convention on Climate Change (UNFCCC) reporting guidelines. The Inventory... Protection Agency, Climate Change Division (6207J), 1200 Pennsylvania Ave., NW., Washington, DC 20460,...

  19. Source attribution using FLEXPART and carbon monoxide emission inventories for the IAGOS In-situ Observation database

    NASA Astrophysics Data System (ADS)

    Fontaine, Alain; Sauvage, Bastien; Pétetin, Hervé; Auby, Antoine; Boulanger, Damien; Thouret, Valerie

    2016-04-01

    Since 1994, the IAGOS program (In-Service Aircraft for a Global Observing System http://www.iagos.org) and its predecessor MOZAIC has produced in-situ measurements of the atmospheric composition during more than 46000 commercial aircraft flights. In order to help analyzing these observations and further understanding the processes driving their evolution, we developed a modelling tool SOFT-IO quantifying their source/receptor link. We improved the methodology used by Stohl et al. (2003), based on the FLEXPART plume dispersion model, to simulate the contributions of anthropogenic and biomass burning emissions from the ECCAD database (http://eccad.aeris-data.fr) to the measured carbon monoxide mixing ratio along each IAGOS flight. Thanks to automated processes, contributions are simulated for the last 20 days before observation, separating individual contributions from the different source regions. The main goal is to supply add-value products to the IAGOS database showing pollutants geographical origin and emission type. Using this information, it may be possible to link trends in the atmospheric composition to changes in the transport pathways and to the evolution of emissions. This tool could be used for statistical validation as well as for inter-comparisons of emission inventories using large amounts of data, as Lagrangian models are able to bring the global scale emissions down to a smaller scale, where they can be directly compared to the in-situ observations from the IAGOS database.

  20. Compilation of a Global Emission Inventory from 1980 to 2000 for Global Model Simulations of the Long-term Trend of Tropospheric Aerosols

    NASA Technical Reports Server (NTRS)

    Diehl, Thomas L.; Chin, Mian; Bond, Tami C.; Carn, SImon A.; Duncan, Bryan N.; Krotkov, Nickolay A.; Streets, David G.

    2006-01-01

    The approach to create a comprehensive emission inventory for the time period 1980 to 2000 is described in this paper. We have recently compiled an emission database, which we will use for a 21 year simulation of tropospheric aerosols with the GOCART model. Particular attention was paid to the time-dependent SO2, black carbon and organic carbon aerosol emissions. For the emission of SO2 from sporadically erupting volcanoes, we assembled emission data from the Global Volcanism Program of the Smithsonian Institution, using the VEI to derive the volcanic cloud height and the SO2 amount, and amended this dataset by the SO2 emission data from the TOMS instrument when available. 3-dimensional aircraft emission data was obtained for a number of years from the AEAP project, converted from burned fuel to SO2 and interpolated to each year, taking the sparsity of the flight patterns into account. Other anthropogenic SO2 emissions are based on gridded emissions from the EDGAR 2000 database (excluding sources from aircraft, biomass burning and international ship traffic), which were scaled to individual years with country/regional based emission inventories. Gridded SO2 emissions from international ship traffic for 2000 and the scaling factors for other years are from [Eyring et al., 2005]. We used gridded anthropogenic black and organic carbon emissions for 1996 [Bond et al., 2005], again excluding aircraft, biomass burning and ship sources. These emissions were scaled with regional based emission inventories from 1980 to 2000 to derive gridded emissions for each year. The biomass burning emissions are based on a climatology, which is scaled with regional scaling factors derived from the TOMS aerosol index and the AVHRR/ASTR fire counts to each year [Duncan et al., 2003]. Details on the integration of the information from the various sources will be provided and the distribution patterns and total emissions in the final product will be discussed.

  1. Compilation of a Global Emission Inventory from 1980 to 2000 for Global Model Simulations of the Long-term Trend of Tropospheric Aerosols

    NASA Technical Reports Server (NTRS)

    Diehl, T. L.; Mian, Chin; Bond, T. C.; Carn, S. A.; Duncan, B. N.; Krotkov, N. A.; Streets, D. G.

    2007-01-01

    The approach to create a comprehensive emission inventory for the time period 1980 to 2000 is described in this paper. We have recently compiled an emission database, which we will use for a 21 year simulation of tropospheric aerosols with the GOCART model. Particular attention was paid to the time-dependent SO2, black carbon and organic carbon aerosol emissions. For the emission of SO2 from sporadically erupting volcanoes, we assembled emission data from the Global Volcanism Program of the Smithsonian Institution, using the VEI to derive the volcanic cloud height and the SO2 amount, and amended this dataset by the SO2 emission data from the TOMS instrument when available. 3-dimensional aircraft emission data was obtained for a number of years from the AEAP project, converted from burned fuel to SO2 and interpolated to each year, taking the sparsity of the flight patterns into account. Other anthopogenic SO2 emissions are based on gridded emissions from the EDGAR 2000 database (excluding sources from aircraft, biomass burning and international ship traffic), which were scaled to individual years with country/regional based emission inventories. Gridded SO2 emissions from international ship traffic for 2000 and the scaling factors for other years are from [Eyring et al., 2005]. We used gridded anthropogenic black and organic carbon emissions for 1996 [Bond et al., 2005], again excluding aircraft, biomass burning and ship sources. These emissions were scaled with regional based emission inventories from 1980 to 2000 to derive gridded emissions for each year. The biomass burning emissions are based on a climatology, which is scaled with regional scaling factors derived from the TOMS aerosol index and the AVHRR/ATSR fire counts to each year [Duncan et al., 2003]. Details on the integration of the information from the various sources will be provided and the distribution patterns and total emissions in the final product will be discussed.

  2. An inventory of the emission of ammonia from agricultural fertilizer application in China for 2010 and its high-resolution spatial distribution

    NASA Astrophysics Data System (ADS)

    Xu, Peng; Zhang, Yisheng; Gong, Weiwei; Hou, Xikang; Kroeze, Carolien; Gao, Wei; Luan, Shengji

    2015-08-01

    In an agricultural county like China, agricultural fertilizers are the source of ammonia (NH3) emissions. However, the spatial variability in NH3 emissions is large, and the associated uncertainties affect the reliability of total NH3 emission estimates. In this study, an inventory is presented for NH3 emissions from China's agricultural fertilizer application at the city-level, and on a 1 × 1 km grid for croplands in 2010. We present NH3 emissions by source, the temporal and spatial patterns, and the associated uncertainties. The inventory is based on high-resolution activity data, regional emission factors (EFs) and related parameters that are derived from local studies. We compare our emissions estimates with previous inventories from EDGAR and other studies. The total NH3 emissions from China's agricultural fertilizer is 10.7 (8.9-12.3) TgNH3·yr-1. Livestock manure spreading contributes 47.5% to the total emissions, and synthetic fertilizer use by 41.9%. Rural excrement (5.0%) and cake fertilizer (5.5%) are relatively small sources. The spatial pattern of NH3 emissions from China's agricultural fertilizer were primarily concentrated in the North China Plain, the Songliao Plain, the Huaihe River Basin, the Middle-Lower Yangtze Plain, the Pearl River Delta Plain, the Sichuan Basin, the Tarim basin and the Leizhou Peninsula. Approximately 50% of the emissions are from only 76 cities. Our temporal analysis reveals a clear seasonal pattern in NH3 emissions: highest and lowest emissions are calculated for summer and winter, accounting for 42% and 14% of the total emissions, respectively. Peak emissions are calculated for July (1.7 TgNH3·yr-1) and lowest emissions for January (0.5 TgNH3·yr-1). The emissions are correlated with temperature, planting time and cultivation practices.

  3. Meso-scale on-road vehicle emission inventory approach: a study on Dhaka City of Bangladesh supporting the 'cause-effect' analysis of the transport system.

    PubMed

    Iqbal, Asif; Allan, Andrew; Zito, Rocco

    2016-03-01

    The study aims to develop an emission inventory (EI) approach and conduct an inventory for vehicular sources in Dhaka City, Bangladesh. A meso-scale modelling approach was adopted for the inventory; the factors that influence the emissions and the magnitude of emission variation were identified and reported on, which was an innovative approach to account emissions unlike the conventional inventory approaches. Two techniques for the emission inventory were applied, viz. (i) a combined top-down and bottom-up approach that considered the total vehicle population and the average diurnal on-road vehicle speed profile in the city and (ii) a bottom-up approach that accounted for road link-specific emissions of the city considering diurnal traffic volume and speed profiles of the respective roads. For the bottom-up approach, road link-specific detailed data were obtained through field survey in 2012, where mid-block traffic count of the day, vehicle speed profile, road network and congestion data were collected principally. The emission variances for the change in transport system characteristics (like change in fuel type, AC usage pattern, increased speed and reduced congestion/stopping) were predicted and analysed in this study; congestion influenced average speed of the vehicles, and fuel types in the vehicles were identified as the major stressors. The study performance was considered reasonable when comparing with the limited number of similar studies conducted earlier. Given the increasing trend of private vehicles each year coupled with increasing traffic congestion, the city is under threat of increased vehicular emissions unless a good management strategy is implemented. Although the inventory is conducted for Dhaka and the result may be important locally, the approach adopted in this research is innovative in nature to be followed for conducting research on other urban transport systems.

  4. Meso-scale on-road vehicle emission inventory approach: a study on Dhaka City of Bangladesh supporting the 'cause-effect' analysis of the transport system.

    PubMed

    Iqbal, Asif; Allan, Andrew; Zito, Rocco

    2016-03-01

    The study aims to develop an emission inventory (EI) approach and conduct an inventory for vehicular sources in Dhaka City, Bangladesh. A meso-scale modelling approach was adopted for the inventory; the factors that influence the emissions and the magnitude of emission variation were identified and reported on, which was an innovative approach to account emissions unlike the conventional inventory approaches. Two techniques for the emission inventory were applied, viz. (i) a combined top-down and bottom-up approach that considered the total vehicle population and the average diurnal on-road vehicle speed profile in the city and (ii) a bottom-up approach that accounted for road link-specific emissions of the city considering diurnal traffic volume and speed profiles of the respective roads. For the bottom-up approach, road link-specific detailed data were obtained through field survey in 2012, where mid-block traffic count of the day, vehicle speed profile, road network and congestion data were collected principally. The emission variances for the change in transport system characteristics (like change in fuel type, AC usage pattern, increased speed and reduced congestion/stopping) were predicted and analysed in this study; congestion influenced average speed of the vehicles, and fuel types in the vehicles were identified as the major stressors. The study performance was considered reasonable when comparing with the limited number of similar studies conducted earlier. Given the increasing trend of private vehicles each year coupled with increasing traffic congestion, the city is under threat of increased vehicular emissions unless a good management strategy is implemented. Although the inventory is conducted for Dhaka and the result may be important locally, the approach adopted in this research is innovative in nature to be followed for conducting research on other urban transport systems. PMID:26857254

  5. Impacts of updated emission inventories on source apportionment of fine particle and ozone over the southeastern U.S.

    NASA Astrophysics Data System (ADS)

    Zhang, Yang; Wang, Wei; Wu, Shiang-Yuh; Wang, Kai; Minoura, Hiroaki; Wang, Zifa

    2014-05-01

    As the U.S. Environmental Protection Agency updates the National Emission Inventory (NEI), the source contributions (SC) of major source sectors to major pollutants based on source apportionment techniques should be periodically reassessed to reflect changes in SCs due to changes in emissions. This work assesses emission updates from the 1999 NEI version 2 (NEI99v2) and the 2005 NEI (NEI05) and the resulting differences in SCs using the two inventories. Large differences exist in the emissions of nitrogen oxide, formaldehyde, ammonia, terpene, and primary PM2.5 between NEI99v2 and NEI05. Differences in emissions lead to differences in model performance and source appointment. SCs of ten major source categories to fine particulate matter (PM2.5) are estimated using the Community Multiscale Air Quality modeling system with the Brute Force Method (CMAQ/BFM) andNEI05and compared with those obtained previously using CMAQ/BFM with NEI99v2. In January, compared to CMAQ/BFM (NEI99v2), CMAQ/BFM (NEI05) shows that miscellaneous areas, biomass burning, and coal combustion remain the top three contributors to PM2.5 but with different ranking and higher SCs (17.7%, 16.0%, and 14.1% for NEI05 vs. 11.8%, 13.7%, and 10.8% for NEI99v2, respectively). In July, coal combustion, miscellaneous areas, and industrial processes remain the top three with higher SCs (41.9%, 14.1%, and 8.8% for NEI05 vs.30.8%, 8.9%, and 6.9% for NEI99v2, respectively). Those changes in SCs are attributed to increased primary PM2.5 (PPM) emissions in NEI05 and increases in relative contributions of miscellaneous areas and coal combustion to the emissions of PPM, NH3, and SO2.SCs from diesel and gasoline vehicles decrease in both months, due to decreased contributions of gasoline vehicles to SO2 and NH3 emissions and those of diesel vehicles to NOx and PPM emissions. Compared with CMAQ/BFM (NEI99v2), SCs from other combustion and biomass burning are higher in Florida, due to substantial increases in

  6. Development of a web GIS application for emissions inventory spatial allocation based on open source software tools

    NASA Astrophysics Data System (ADS)

    Gkatzoflias, Dimitrios; Mellios, Giorgos; Samaras, Zissis

    2013-03-01

    Combining emission inventory methods and geographic information systems (GIS) remains a key issue for environmental modelling and management purposes. This paper examines the development of a web GIS application as part of an emission inventory system that produces maps and files with spatial allocated emissions in a grid format. The study is not confined in the maps produced but also presents the features and capabilities of a web application that can be used by every user even without any prior knowledge of the GIS field. The development of the application was based on open source software tools such as MapServer for the GIS functions, PostgreSQL and PostGIS for the data management and HTML, PHP and JavaScript as programming languages. In addition, background processes are used in an innovative manner to handle the time consuming and computational costly procedures of the application. Furthermore, a web map service was created to provide maps to other clients such as the Google Maps API v3 that is used as part of the user interface. The output of the application includes maps in vector and raster format, maps with temporal resolution on daily and hourly basis, grid files that can be used by air quality management systems and grid files consistent with the European Monitoring and Evaluation Programme Grid. Although the system was developed and validated for the Republic of Cyprus covering a remarkable wide range of pollutant and emissions sources, it can be easily customized for use in other countries or smaller areas, as long as geospatial and activity data are available.

  7. A refined 2010-based VOC emission inventory and its improvement on modeling regional ozone in the Pearl River Delta Region, China.

    PubMed

    Yin, Shasha; Zheng, Junyu; Lu, Qing; Yuan, Zibing; Huang, Zhijiong; Zhong, Liuju; Lin, Hui

    2015-05-01

    Accurate and gridded VOC emission inventories are important for improving regional air quality model performance. In this study, a four-level VOC emission source categorization system was proposed. A 2010-based gridded Pearl River Delta (PRD) regional VOC emission inventory was developed with more comprehensive source coverage, latest emission factors, and updated activity data. The total anthropogenic VOC emission was estimated to be about 117.4 × 10(4)t, in which on-road mobile source shared the largest contribution, followed by industrial solvent use and industrial processes sources. Among the industrial solvent use source, furniture manufacturing and shoemaking were major VOC emission contributors. The spatial surrogates of VOC emission were updated for major VOC sources such as industrial sectors and gas stations. Subsector-based temporal characteristics were investigated and their temporal variations were characterized. The impacts of updated VOC emission estimates and spatial surrogates were evaluated by modeling O₃ concentration in the PRD region in the July and October of 2010, respectively. The results indicated that both updated emission estimates and spatial allocations can effectively reduce model bias on O₃ simulation. Further efforts should be made on the refinement of source classification, comprehensive collection of activity data, and spatial-temporal surrogates in order to reduce uncertainty in emission inventory and improve model performance. PMID:25687669

  8. Emissions inventory of anthropogenic PM 2.5 and PM 10 in Delhi during Commonwealth Games 2010

    NASA Astrophysics Data System (ADS)

    Sahu, Saroj Kumar; Beig, Gufran; Parkhi, Neha S.

    2011-11-01

    As part of the System of Air quality Forecasting and Research (SAFAR) project developed for air quality forecasting during the Commonwealth Games (CWG) - 2010, a high resolution Emission Inventory (EI) of PM 10 and PM 2.5 has been developed for the metropolitan city Delhi for the year 2010. The comprehensive inventory involves detailed activity data and developed for a domain of 70 km × 65 km with a 1.67 km × 1.67 km resolution covering Delhi and surrounding region using Geographical Information System (GIS) technique. The major sectors considered are, transport, thermal power plants, industries, residential and commercial cooking along with windblown road dust which is found to play a major role for Delhi environment. It has been found that total emissions of PM 10 and PM 2.5 including wind blown dust over the study area are found to be 236 Gg yr -1 and 94 Gg yr -1 respectively. The contribution of windblown road dust is found to be as high as 131 Gg yr -1 for PM 10.

  9. Comparison of near-surface CO from multispectral measurements from MOPITT with WRF-Chem simulations using emissions inventory for the Beijing 2008 Olympics

    NASA Astrophysics Data System (ADS)

    Worden, H. M.; Cheng, Y.; Pfister, G.; Carmichael, G.; Deeter, M. N.; Edwards, D. P.; Gille, J. C.; Zhang, Q.; Streets, D. G.

    2010-12-01

    We present initial comparisons of MOPITT multispectral (TIR + NIR) CO measurements with WRF-Chem simulations for the Beijing Olympics in August 2008. The Chinese government made a significant effort to improve air quality during the Olympics by controlling pollution emissions around Beijing before and during Olympics. A new emissions inventory has been created to account for these controls and implemented in WRF-chem. The inventory is specific for pollution sectors such as power, industry, transport and domestic, with corresponding emission factors. By comparing to the MOPITT data, we can test the model predictions for CO and derive improved emissions estimates, then potentially use the emission factors to infer the corresponding reduction in CO2 emissions during the Olympics.

  10. Remote Sensing Based Methane Emission Inventory Vis-A-Vis Rice Cultural Types Of South Asia

    NASA Astrophysics Data System (ADS)

    Manjunath, K. R.; More, R.; Chauhan, P.; Vyas, A.; Panigrahy, S.; Parihar, J. S.

    2014-11-01

    Rice cultivation has been recognized as one of the major anthropogenic source for methane (CH4) emissions which is a microbial mediated anaerobic activity, mainly favoured by the flooded conditions in the rice fields. Information available on CH4 emission is limited, especially in a spatial domain, mainly because of the complexity involved in generating such data. The current approach demonstrates the use of secondary data sources available on the methane emission scaling factors, coupled with the information derived on rice cultural types and crop calendar. Methane emission from each type of rice field was firstly calculated by multiplying the emission factor by the corresponding cultivation area and length of cropping period. The values were then extrapolated over each country with respect to the rice area and crop duration for under each cultural type. The rice cultural type wise methane emission value for South Asia was derived by summation of individual emission values for the respective cultural type within each country. The total methane emission derived for South Asia region is (4.7817 Tg/yr). The mean methane emission estimates derived for each country are viz. India (3.3860 Tg/yr), Bangladesh (0.9136 Tg/yr), Pakistan (0.2675 Tg/yr), Sri Lanka (0.1073 Tg/yr) and Nepal (0.1074 Tg/yr). The derived methane emission estimates could be used to study the regional variations within the country and also to adopt the mitigation strategies to combat the high methane emission values within specific cultural type by means of altering the farming practise or water regime.

  11. A Statistical Method for Estimating Missing GHG Emissions in Bottom-Up Inventories: The Case of Fossil Fuel Combustion in Industry in the Bogota Region, Colombia

    NASA Astrophysics Data System (ADS)

    Jimenez-Pizarro, R.; Rojas, A. M.; Pulido-Guio, A. D.

    2012-12-01

    The development of environmentally, socially and financially suitable greenhouse gas (GHG) mitigation portfolios requires detailed disaggregation of emissions by activity sector, preferably at the regional level. Bottom-up (BU) emission inventories are intrinsically disaggregated, but although detailed, they are frequently incomplete. Missing and erroneous activity data are rather common in emission inventories of GHG, criteria and toxic pollutants, even in developed countries. The fraction of missing and erroneous data can be rather large in developing country inventories. In addition, the cost and time for obtaining or correcting this information can be prohibitive or can delay the inventory development. This is particularly true for regional BU inventories in the developing world. Moreover, a rather common practice is to disregard or to arbitrarily impute low default activity or emission values to missing data, which typically leads to significant underestimation of the total emissions. Our investigation focuses on GHG emissions by fossil fuel combustion in industry in the Bogota Region, composed by Bogota and its adjacent, semi-rural area of influence, the Province of Cundinamarca. We found that the BU inventories for this sub-category substantially underestimate emissions when compared to top-down (TD) estimations based on sub-sector specific national fuel consumption data and regional energy intensities. Although both BU inventories have a substantial number of missing and evidently erroneous entries, i.e. information on fuel consumption per combustion unit per company, the validated energy use and emission data display clear and smooth frequency distributions, which can be adequately fitted to bimodal log-normal distributions. This is not unexpected as industrial plant sizes are typically log-normally distributed. Moreover, our statistical tests suggest that industrial sub-sectors, as classified by the International Standard Industrial Classification (ISIC

  12. Use of Historical Measurements to Constrain a Black Carbon Emission Inventory of the United States from 1960s to 2000s

    NASA Astrophysics Data System (ADS)

    Sun, T.; Bond, T. C.; Liu, L.; Flanner, M.; Kirchstetter, T.; Jiao, C.; Preble, C.; Chang, W.

    2015-12-01

    We use historical coefficient of haze measurements in California and New Jersey to evaluate and constrain a black carbon (BC) emission inventory for the period 1960-2000. We estimate the relationship between emissions and ambient air concentrations of BC using the Community Atmosphere Model to create source-receptor that allow reconstruction of ambient, time-varying concentrations. We adjust this matrix to account for errors in modeled mixing height with observations. We also apply Heating Degree Days (HDD) data to estimate seasonal variation in emissions. However, HDDs do not fully explain the seasonal variation trend of the measurement. The emission inventory used in this work is based on U.S. Energy Information Administration fuel use data published in 2010. We calculate BC emissions with Speciated Pollutant Emissions Wizard (SPEW). Modifications to previous work include use of the SPEW-Trend vehicle fleet model to compute vehicle emissions, incorporating parameters of vehicle type, age, retirement rate, and the number of superemitters. Analyzing the discrepancy between reconstructed and measured BC concentrations of California and New Jersey identifies potential errors in historical emissions. Acknowledging the resolution difference between the reconstructed concentrations based on global model simulation and the urban measurements, we rely more on the discrepancies in trends than in absolute discrepancies. Although the observations decreased throughout this time period, the reconstructed concentrations peaked in the 1980s. Fuel use and emission factors for specific technologies and sectors in the BC emission inventory are analyzed to isolate those sectors most likely to cause the discrepancy. The modified emission inventory for the period 1960-2000 is presented.

  13. Development and uncertainty analysis of a high-resolution NH3 emissions inventory and its implications with precipitation over the Pearl River Delta region, China

    NASA Astrophysics Data System (ADS)

    Zheng, J. Y.; Yin, S. S.; Kang, D. W.; Che, W. W.; Zhong, L. J.

    2012-08-01

    Detailed NH3 emission inventories are important to understand various atmospheric processes, air quality modeling studies, air pollution management, and related environmental and ecological issues. A high-resolution NH3 emission inventory was developed based on state-of-the-science techniques, up-to-date information, and advanced expert knowledge for the Pearl River Delta region, China. To provide model-ready emissions input, this NH3 emissions inventory was spatially allocated to 3 km × 3 km grid cells using source-based spatial surrogates with geographical information system (GIS) technology. For NH3 emissions, 9 source categories and 45 subcategories were identified in this region, and detailed spatial and temporal characteristics were investigated. Results show that livestock is by far the most important NH3 emission source by contributing about 61.7% of the total NH3 emissions in this region, followed by nitrogen fertilizer applications (~23.7%) and non-agricultural sources (~14.6%). Uncertainty analysis reveals that the uncertainties associated with different sources vary from source to source and the magnitude of the uncertainty associated with a specific source mainly depends on the degree of accuracy of the emission factors and activity data as well as the technique used to perform the estimate. Further studies should give priority to the hog, broiler, goose subsectors of the livestock source and N fertilizer application source in order to reduce uncertainties of ammonia emission estimates in this region. The validity of the NH3 emissions inventory is justified by the trend analysis of local precipitation compositions, such as pH values, the Ca2++NH4+/SO42-+ NO3- ratios, and NH4+ concentrations which are directly or indirectly related to NH3 emissions.

  14. Development and Evaluation of the Biogenic Emissions Inventory System (BEIS) Model v3.6

    EPA Science Inventory

    We have developed new canopy emission algorithms and land use data for BEIS v3.6. Simulations with BEIS v3.4 and BEIS v3.6 in CMAQ v5.0.2 are compared these changes to the Model of Emissions of Gases and Aerosols from Nature (MEGAN) and evaluated the simulations against observati...

  15. "Updates to Model Algorithms & Inputs for the Biogenic Emissions Inventory System (BEIS) Model"

    EPA Science Inventory

    We have developed new canopy emission algorithms and land use data for BEIS. Simulations with BEIS v3.4 and these updates in CMAQ v5.0.2 are compared these changes to the Model of Emissions of Gases and Aerosols from Nature (MEGAN) and evaluated the simulations against observatio...

  16. AN IMPROVED INVENTORY OF METHANE EMISSIONS FROM COAL MINING IN THE UNITED STATES

    EPA Science Inventory

    Past efforts to estimate methane emissions from underground mines surface mines, and other coal mine operations have been hampered, to different degrees, by a lack of direct emissions data. Direct measurements have been completely unavailable for several important coal mining ope...

  17. Development of a local carbon dioxide emissions inventory based on energy demand and waste production

    SciTech Connect

    Joao Gomes; Joana Nascimento; Helena Rodrigues

    2007-09-15

    The paper describes the study that led to the development of a carbon dioxide emissions matrix for the Oeiras municipality, one of the largest Portuguese municipalities, located in the metropolitan area of Lisbon. This matrix takes into account the greenhouse gas (GHG) emissions due to an increase of electricity demand in buildings as well as solid and liquid wastes treatment from the domestic and services sectors. Using emission factors that were calculated from the relationship between the electricity produced and amount of treated wastes, the GHC emissions in the Oeiras municipality were estimated for a time series of 6 yr (1998 - 2003). The obtained results showed that the electricity sector accounts for approximately 75% of the municipal emissions in 2003. This study was developed to obtain tools to base options and actions to be undertaken by local authorities such as energy planning and also public information. 11 refs., 12 tabs.

  18. Inventory and mitigation opportunities for HFC-134a emissions from nonprofessional automotive service

    NASA Astrophysics Data System (ADS)

    Zhan, Tao; Potts, Winston; Collins, John F.; Austin, Jeff

    2014-12-01

    Many vehicle owners in the United States recharge their vehicles' air conditioning systems with small containers of hydrofluorocarbon-134a (HFC-134a, CH2FCF3), at a frequency estimated to be once every year on average. Such nonprofessional service produces immediate emissions of this potent greenhouse gas during service and from the residual heel in partially used containers. The nonprofessional operations are also associated with increased delayed refrigerant emissions that occur because owners are less likely to repair leaks than professional technicians. In California, an estimated 1.3 million nonprofessional service operations performed each year generate 0.27 ± 0.07 million metric ton CO2 equivalent (MMTCO2e) of immediate emissions and 0.54 ± 0.08 MMTCO2e of delayed emissions, using a Global Warming Potential of 1300 for HFC-134a. The immediate emissions can be largely mitigated by a regulation that requires self-sealing valves and improved labeling instructions on the containers, a deposit-return-recycling program for the containers, and a consumer education program. If 95% of the used containers were to be returned by consumers for recycling of the container heel, the annual immediate emissions would be reduced by 0.26 ± 0.07 MMTCO2e. In the United States, an estimated 24 million nonprofessional service operations are performed each year, generating 5.1 ± 1.4 MMTCO2e of immediate emissions and 10.4 ± 1.5 MMTCO2e of delayed emissions. Mitigation measures equivalent to the California regulation would reduce nationwide immediate emissions by 4.9 ± 1.4 MMTCO2e, if 95% of the used cans were returned for recycling. These business-as-usual emissions and mitigation potentials are projected to stay approximately constant until around 2022, and remain at significant levels into the 2030s.

  19. Qualitative assessment of methane emission inventory from municipal solid waste disposal sites: a case study

    NASA Astrophysics Data System (ADS)

    Kumar, Sunil; Mondal, A. N.; Gaikwad, S. A.; Devotta, Sukumar; Singh, R. N.

    2004-09-01

    In developing countries like India, urban solid waste (SW) generation is increasing enormously and most of the SWs are disposed off by land filling in low-lying areas, resulting into generation of large quantities of biogas. Methane, the major constituent gas is known to cause global warming due to green house gas (GHG) effect. There is a need to study the ever-increasing contribution of SW to the global GHG effect. To assess the impacts, estimation of GHG emission is must and to avoid misguidance by these emission-data, qualitative assessment of the estimated GHG is a must. In this paper, methane emission is estimated for a particular landfill site, using default methodology and modified triangular methodology. Total methane generation is same for both theoretical methodologies, but the modified triangular method has an upper hand as it provides a time-dependent emission profile that reflects the true pattern of the degradation process. To check the quality of calculated emission-data, extensive sampling is carried out for different seasons in a year. Field results show a different trend as compared to theoretical results, this compels for logical thinking. Each methane emission-data is backed up by the uncertainty associated with it, this further strengthens the quality check of these data. Uncertainty calculation is done using Monte Carlo simulation technique, recommended in IPCC Guideline. In the due course of qualitative assessment of methane emission-data, many site-specific sensitive parameters are discovered and are briefly discussed in this paper.

  20. A methodology to estimate greenhouse gases emissions in Life Cycle Inventories of wastewater treatment plants

    SciTech Connect

    Rodriguez-Garcia, G.; Moreira, M.T.

    2012-11-15

    The main objective of this paper is to present the Direct Emissions Estimation Model (DEEM), a model for the estimation of CO{sub 2} and N{sub 2}O emissions from a wastewater treatment plant (WWTP). This model is consistent with non-specific but widely used models such as AS/AD and ASM no. 1 and presents the benefits of simplicity and application over a common WWTP simulation platform, BioWin Registered-Sign , making it suitable for Life Cycle Assessment and Carbon Footprint studies. Its application in a Spanish WWTP indicates direct N{sub 2}O emissions to be 8 times larger than those associated with electricity use and thus relevant for LCA. CO{sub 2} emissions can be of similar importance to electricity-associated ones provided that 20% of them are of non-biogenic origin. - Highlights: Black-Right-Pointing-Pointer A model has been developed for the estimation of GHG emissions in WWTP. Black-Right-Pointing-Pointer Model was consistent with both ASM no. 1 and AS/AD. Black-Right-Pointing-Pointer N{sub 2}O emissions are 8 times more relevant than the one associated with electricity. Black-Right-Pointing-Pointer CO{sub 2} emissions are as important as electricity if 20% of it is non-biogenic.

  1. Wildland Fire Emission Inventories - Sensitivity to Assumptions in Fuel Mapping and Loading

    NASA Astrophysics Data System (ADS)

    Urbanski, S. P.; Hao, W. M.; Nordgren, B.

    2009-12-01

    Emissions of trace gases and aerosols by biomass burning have a significant influence on the chemical composition of the atmosphere, air quality, and the climate system. Biomass burning emissions depend on a wide range of variables including burned area, the type, loading, and condition of fuels, meteorological conditions, combustion completeness, and specific emission factors. There exists a wide range of variability among the algorithms employed to provide fire emission estimates for Chemical Transport Models. The sensitivity of emission estimates to the various algorithm components is not well characterized. Understanding the sensitivity of emission estimates to assumptions and uncertainties associated with each input to emission algorithms - burned area, fuel map, fuel load, fuel consumption, and emission factors, is crucial for properly assessing the impact these assumptions may have on the simulation results of Chemical Transport Models. We examine the spatial and temporal sensitivity of emission estimates of CO2, CO, CH4, and PM2.5 to assumptions in vegetation mapping and fuel loading. The study focuses on wildland fire in the western United States from 2003 - 2008. Three fuel maps and three fuel loading models have been used to provide seven fire emission scenarios employing identical burned area, meteorological conditions, and fuel consumption modeling. As fuel mapping assumptions the study used a vegetation map and a preliminary map of the Lutes et al. (2009) Fuel Loading Models (FLM), both produced by the Landfire project (http://www.landfire.gov), and the Fuel Characteristic Classification System (FCCS) map (McKenzie et al., 2007). The FLM, FCCS, and First Order Fire Effects Model (FOFEM, http://fire.org/) reference fuel loading database provided the different fuel loading states. The study finds the variability in annual emissions associated with the choice of fuel map (with fixed fuel loading) or fuel loading model (with fixed fuel mapping) exceeds 30

  2. QA procedures and emissions from nonstandard sources in AQUIS, a PC-based emission inventory and air permit manager

    SciTech Connect

    Smith, A.E.; Tschanz, J.; Monarch, M.

    1996-05-01

    The Air Quality Utility Information System (AQUIS) is a database management system that operates under dBASE IV. It runs on an IBM-compatible personal computer (PC) with MS DOS 5.0 or later, 4 megabytes of memory, and 30 megabytes of disk space. AQUIS calculates emissions for both traditional and toxic pollutants and reports emissions in user-defined formats. The system was originally designed for use at 7 facilities of the Air Force Materiel Command, and now more than 50 facilities use it. Within the last two years, the system has been used in support of Title V permit applications at Department of Defense facilities. Growth in the user community, changes and additions to reference emission factor data, and changing regulatory requirements have demanded additions and enhancements to the system. These changes have ranged from adding or updating an emission factor to restructuring databases and adding new capabilities. Quality assurance (QA) procedures have been developed to ensure that emission calculations are correct even when databases are reconfigured and major changes in calculation procedures are implemented. This paper describes these QA and updating procedures. Some user facilities include light industrial operations associated with aircraft maintenance. These facilities have operations such as fiberglass and composite layup and plating operations for which standard emission factors are not available or are inadequate. In addition, generally applied procedures such as material balances may need special treatment to work in an automated environment, for example, in the use of oils and greases and when materials such as polyurethane paints react chemically during application. Some techniques used in these situations are highlighted here. To provide a framework for the main discussions, this paper begins with a description of AQUIS.

  3. Source apportionment of PAHs in atmospheric particulates of Dalian: Factor analysis with nonnegative constraints and emission inventory analysis

    NASA Astrophysics Data System (ADS)

    Wan, Xianlie; Chen, Jingwen; Tian, Fulin; Sun, Weijun; Yang, Fenglin; Saiki, Kaoru

    Levels of 12 PAH species, phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[e]pyrene, benzo[a]pyrene, perylene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene, in atmospheric particulates from urban area of Dalian, China, were determined. The sampling was performed at 15 sites in 1998. For wintertime and summertime, the summation of the 12 PAHs (ΣPAHs) averaged 167 (53.3-561) and 17.9 (1.6-48.9) ng m -3, respectively, which were much higher than the levels in other cities worldwide. Factor analysis with nonnegative constraints was used for source apportionment, which showed that PAHs originated from coal-related sources mainly (87%) and traffic emission as a second source (13%) in wintertime, and in summertime, coal-related sources (70%), traffic-related sources (27%), and wood burning (3%). The source apportionment results agree with the actual municipal and industrial layout well. Inventory analysis estimated the total amount of the 12 PAHs emitted by regulated stationary and mobile sources was 9940 kg in 1998. Qualitatively, consistent source apportionment results were obtained from the factor analysis with nonnegative constraints and inventory analysis.

  4. Spatial distribution of vehicle emission inventories in the Federal District, Brazil

    NASA Astrophysics Data System (ADS)

    Réquia, Weeberb João; Koutrakis, Petros; Roig, Henrique Llacer

    2015-07-01

    Air pollution poses an important public health risk, especially in large urban areas. Information about the spatial distribution of air pollutants can be used as a tool for developing public policies to reduce source emissions. Air pollution monitoring networks provide information about pollutant concentrations; however, they are not available in every urban area. Among the 5570 cities in Brazil, for example, only 1.7% of them have air pollution monitoring networks. In this study we assess vehicle emissions for main traffic routes of the Federal District (state of Brazil) and characterize their spatial patterns. Toward this end, we used a bottom-up method to predict emissions and to characterize their spatial patterns using Global Moran's (Spatial autocorrelation analysis) and Getis-Ord General G (High/Low cluster analysis). Our findings suggested that light duty vehicles are primarily responsible for the vehicular emissions of CO (68.9%), CH4 (93.6%), and CO2 (57.9%), whereas heavy duty vehicles are primarily responsible for the vehicular emissions of NMHC (92.9%), NOx (90.7%), and PM (97.4%). Furthermore, CO2 is the pollutant with the highest emissions, over 30 million tons/year. In the spatial autocorrelation analysis was identified cluster (p < 0.01) for all types of vehicles and for all pollutants. However, we identified high cluster only for the light vehicles.

  5. 75 FR 9411 - Official Release of the MOVES2010 Motor Vehicle Emissions Model for Emissions Inventories in SIPs...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-02

    ... replaces the previous emissions model, MOBILE6.2, which was released in 2004 (69 FR 28830).\\1\\ \\1\\ Today's... analyses for transportation conformity (73 FR 3464). MOVES2010 improves upon MOBILE6.2 in several key... Register on May 19, 2004, 69 FR 28830-28832. Also see EPA's memoranda: ``Policy Guidance on the Use of...

  6. Nitrogen isotopic composition of coal-fired power plant NOx: influence of emission controls and implications for global emission inventories.

    PubMed

    Felix, J David; Elliott, Emily M; Shaw, Stephanie L

    2012-03-20

    Despite the potential use of δ(15)N as a tracer of NO(x) source contributions, prior documentation of δ(15)N of various NO(x) emission sources is exceedingly limited. This manuscript presents the first measurements of the nitrogen isotopic composition of NO(x) (δ(15)N-NO(x)) emitted from coal-fired power plants in the U.S. at typical operating conditions with and without the presence of selective catalytic reduction (SCR) and selective noncatalytic reduction (SNCR) technology. To accomplish this, a novel method for collection and isotopic analysis of coal-fired stack NO(x) emission samples was developed based on modifications of a historic U.S. EPA stack sampling method. At the power plants included in this study, large differences exist in the isotopic composition of NO(x) emitted with and without SCRs and SNCRs; further the isotopic composition of power plant NO(x) is higher than that of other measured NO(x) emission sources confirming its use as an environmental tracer. These findings indicate that gradual implementation of SCRs at power plants will result in an industry-wide increase in δ(15)N values of NO(x) and NO(y) oxidation products from this emission source.

  7. DEVELOPMENT OF COUNTY-LEVEL WIND EROSION AND UNPAVED ROAD ALKALINE EMISSION ESTIMATES FOR THE 1985 NAPAP EMISSIONS INVENTORY

    EPA Science Inventory

    The report details the methods used and the result of the conversion of the National Acid Precipitation Assessment Program's (NAPAP's) alkaline material emissions information for wind erosion, unpaved roads, and dust devils from the' current spatial resolution to county-level res...

  8. U.S. Natural Gas System Methane Emissions: State of Knowledge from LCAs, Inventories, and Atmospheric Measurements (Presentation)

    SciTech Connect

    Heath, G.

    2014-04-01

    Natural gas (NG) is a potential "bridge fuel" during transition to a decarbonized energy system: It emits less carbon dioxide during combustion than other fossil fuels and can be used in many industries. However, because of the high global warming potential of methane (CH4, the major component of NG), climate benefits from NG use depend on system leakage rates. Some recent estimates of leakage have challenged the benefits of switching from coal to NG, a large near-term greenhouse gas (GHG) reduction opportunity. During this presentation, Garvin will review evidence from multiple perspectives - life cycle assessments (LCAs), inventories and measurements - about NG leakage in the US. Particular attention will be paid to a recent article in Science magazine which reviewed over 20 years of published measurements to better understand what we know about total methane emissions and those from the oil and gas sectors. Scientific and policy implications of the state of knowledge will be discussed.

  9. A comprehensive ammonia emission inventory with high-resolution and its evaluation in the Beijing-Tianjin-Hebei (BTH) region, China

    NASA Astrophysics Data System (ADS)

    Zhou, Ying; Shuiyuan Cheng; Lang, Jianlei; Chen, Dongsheng; Zhao, Beibei; Liu, Chao; Xu, Ran; Li, Tingting

    2015-04-01

    A comprehensive ammonia (NH3) emission inventory for the Beijing-Tianjin-Hebei (BTH) region was developed based on the updated source-specific emission factors (EFs) and the county-level activity data obtained from a full-coverage investigation launched in the BTH region for the first time. The NH3 emission inventory within 1 km × 1 km grid was generated using source-based spatial surrogates with geographical information system (GIS) technology. The total NH3 emission was 1573.7 Gg for the year 2010. The contributions from livestock, farmland, human, biomass burning, chemical industry, fuel combustion, waste disposal and on-road mobile source were approximately 56.6%, 28.6%, 7.2%, 3.4%, 1.1%, 1.3%, 1.0% and 0.8%, respectively. Among different cities, Shijiazhang, Handan, Xingtai, Tangshan and Cangzhou had higher NH3 emissions. Statistical analysis aiming at county-level emission of 180 counties in BTH indicated that the NH3 emission in most of the counties were less than 16 Gg. The maximum value of the county level emission was approximately 25.5 Gg. Higher NH3 emission was concentrated in the areas with more rural and agricultural activity. Monthly, higher NH3 emission occurred during the period from April to September, which could be attributed to the temperature and timing of planting practice. The validity of the estimated emissions were further evaluated from multiple perspectives covering (1) uncertainty analysis based on Monte Carlo simulation, (2) comparison with other studies, (3) quantitative analysis of improvement in spatial resolution of activity data, and (4) verification based on a comparison of the simulated and observed surface concentrations of ammonium. The detailed and validated ammonia emission inventory could provide valuable information for understanding air pollution formation mechanisms and help guide decision-making with respect to control strategies.

  10. The new open Flexible Emission Inventory for Greece and the Greater Athens Area (FEI-GREGAA): Account of pollutant sources and their importance from 2006 to 2012

    NASA Astrophysics Data System (ADS)

    Fameli, Kyriaki-Maria; Assimakopoulos, Vasiliki D.

    2016-07-01

    Photochemical and particulate pollution problems persist in Athens as they do in various European cities, despite measures taken. Although, for many cities, organized and updated pollutant emissions databases exist, as well as infrastructure for the support of policy implementation, this is not the case for Greece and Athens. So far abstract efforts to create inventories from temporal and spatial annual low resolution data have not lead to the creation of a useful database. The objective of this study was to construct an emission inventory in order to examine the emission trends in Greece and the Greater Athens Area for the period 2006-2012 on a spatial scale of 6 × 6 km2 and 2 × 2 km2, respectively and on a temporal scale of 1 h. Emissions were calculated from stationary combustion sources, transportation (road, navigation and aviation), agriculture and industry obtained from official national and European sources. Moreover, new emission factors were calculated for road transport and aviation. The final database named F.E.I. - GREGAA (Flexible Emission Inventory for GREece and the GAA) is open-structured so as to receive data updates, new pollutants, various emission scenarios and/or different emission factors and be transformed for any grid spacing. Its main purpose is to be used in applications with photochemical models to contribute to the investigation on the type of sources and activities that lead to the configuration of air quality. Results showed a decreasing trend in CO, NOx and VOCs-NMVOCs emissions and an increasing trend from 2011 onwards in PM10 emissions. Road transport and small combustion contribute most to CO emissions, road transport and navigation to NOx and small combustion and industries to PM10. The onset of the economic crisis can be seen from the reduction of emissions from industry and the increase of biomass burning for heating purposes.

  11. Scheduled Civil Aircraft Emission Inventories for 1999: Database Development and Analysis

    NASA Technical Reports Server (NTRS)

    Sutkus, Donald J., Jr.; Baughcum, Steven L.; DuBois, Douglas P.

    2001-01-01

    This report describes the development of a three-dimensional database of aircraft fuel burn and emissions (NO(x), CO, and hydrocarbons) for the scheduled commercial aircraft fleet for each month of 1999. Global totals of emissions and fuel burn for 1999 are compared to global totals from 1992 and 2015 databases. 1999 fuel burn, departure and distance totals for selected airlines are compared to data reported on DOT Form 41 to evaluate the accuracy of the calculations. DOT Form T-100 data were used to determine typical payloads for freighter aircraft and this information was used to model freighter aircraft more accurately by using more realistic payloads. Differences in the calculation methodology used to create the 1999 fuel burn and emissions database from the methodology used in previous work are described and evaluated.

  12. Estimate of sulfur, arsenic, mercury, fluorine emissions due to spontaneous combustion of coal gangue: An important part of Chinese emission inventories.

    PubMed

    Wang, Shaobin; Luo, Kunli; Wang, Xing; Sun, Yuzhuang

    2016-02-01

    A rough estimate of the annual amount of sulfur, arsenic, mercury and fluoride emission from spontaneous combustion of coal gangue in China was determined. The weighted mean concentrations of S, As, Hg, and F in coal gangue are 1.01%, 7.98, 0.18, and 365.54 mg/kg, respectively. Amounts of S, As, Hg, and F emissions from coal gangue spontaneous combustion show approximately 1.13 Mt, and 246, 45, and 63,298 tons in 2013, respectively. The atmospheric release amount of sulfur from coal gangue is more than one tenth of this from coal combustion, and the amounts of As, Hg, and F are close to or even exceed those from coal combustion. China's coal gangue production growth from 1992 to 2013 show an obvious growth since 2002. It may indicate that Chinese coal gangue has become a potential source of air pollution, which should be included in emission inventories. PMID:26650082

  13. Evaluation of on-road vehicle CO and NOx National Emission Inventories using an urban-scale source-oriented air quality model

    NASA Astrophysics Data System (ADS)

    Kota, Sri Harsha; Zhang, Hongliang; Chen, Gang; Schade, Gunnar W.; Ying, Qi

    2014-03-01

    The MOBILE6.2 model was replaced by the Motor Vehicle Emission Simulator (MOVES) in 2012 as an official tool recommended by the United States Environmental Protection Agency (US EPA) to predict vehicular pollutant emission factors. In this study, on-road vehicle emission inventories of CO and NOx for Southeast Texas generated by MOVES and MOBILE6.2 in two versions of the 2005 National Emission Inventory (NEI) were studied by comparing predicted CO and NOx using the EPA's Community Multiscale Air Quality (CMAQ) Model incorporated with a source-oriented gas phase chemical mechanism with measurements made at six urban and industrial sites in Southeast Texas. The source tracing technique allows direct determination of contributions of on-road vehicles to overall CO and NOx concentrations and identification of ambient concentration measurements which are mostly impacted by vehicle emissions. By grouping the fractional bias (FB) values of the hourly predictions based on vehicle contributions to total CO or NOx concentrations, clear trends in the FB were observed, indicating systematic biases in the emission inventory for these species. Data points dominated by vehicle emissions suggest that surface CO concentrations due to vehicle exhaust are significantly over-estimated by a factor of 2 using either MOVES or MOBILE6.2. NOx concentrations are overestimated by approximately 20-35% and 70% by using the MOBILE6.2 and MOVES emissions, respectively. Emission scaling runs show that a domain-wide reduction of MOBILE6.2 CO emissions by 60% and NOx emissions by 15-25% leads to better model performance of exhaust CO and NOx concentrations in the current study.

  14. Assessing Satellite-based Fire Data for use in the National Emissions Inventory

    EPA Science Inventory

    Biomass burning is significant to emission estimated because: (1) it can be a major contributor of particulate matter and other pollutants; (2) it is one of the most poorly documented of all sources; (3) it can adversely affect human health; and (4) it has been identified as a si...

  15. UNITED STATES LAND USE INVENTORY FOR ESTIMATING BIOGENIC OZONE PRECURSOR EMISSIONS

    EPA Science Inventory

    The U.S. Geological Survey's (USGS) Earth Resources Observation System (EROS) Data Center's (EDC) 1-km classified land cover data are combined with other land use data using a Geographic Information System (GIS) to create the Biogenic Emissions Landcover Database (BELD). The land...

  16. Emission factors, size distributions, and emission inventories of carbonaceous particulate matter from residential wood combustion in rural China.

    PubMed

    Guofeng, Shen; Siye, Wei; Wen, Wei; Yanyan, Zhang; Yujia, Min; Bin, Wang; Rong, Wang; Wei, Li; Huizhong, Shen; Ye, Huang; Yifeng, Yang; Wei, Wang; Xilong, Wang; Xuejun, Wang; Shu, Tao

    2012-04-01

    Published emission factors (EFs) often vary significantly, leading to high uncertainties in emission estimations. There are few reliable EFs from field measurements of residential wood combustion in China. In this study, 17 wood fuels and one bamboo were combusted in a typical residential stove in rural China to measure realistic EFs of particulate matter (PM), organic carbon (OC), and elemental carbon (EC), as well as to investigate the influence of fuel properties and combustion conditions on the EFs. Measured EFs of PM, OC, and EC (EF(PM), EF(OC), and EF(EC), respectively) were in the range of 0.38-6.4, 0.024-3.0, and 0.039-3.9 g/kg (dry basis), with means and standard derivation of 2.2 ± 1.2, 0.62 ± 0.64, and 0.83 ± 0.69 g/kg, respectively. Shrubby biomass combustion produced higher EFs than tree woods, and both species had lower EFs than those of indoor crop residue burning (p < 0.05). Significant correlations between EF(PM), EF(OC), and EF(EC) were expected. By using a nine-stage cascade impactor, it was shown that size distributions of PM emitted from tree biomass combustions were unimodal with peaks at a diameter less than 0.4 μm (PM(0.4)), much finer than the PM from indoor crop residue burning. Approximately 79.4% of the total PM from tree wood combustion was PM with a diameter less than 2.1 μm (PM(2.1)). PM size distributions for shrubby biomasses were slightly different from those for tree fuels. On the basis of the measured EFs, total emissions of PM, OC, and EC from residential wood combustion in rural China in 2007 were estimated at about 303, 75.7, and 92.0 Gg. PMID:22380753

  17. A global emission inventory of carbonaceous aerosol from historic records of fossil fuel and biofuel consumption for the period 1860-1997

    NASA Astrophysics Data System (ADS)

    Junker, C.; Liousse, C.

    2006-06-01

    Country by country emission inventories for carbonaceous aerosol for the period 1860 to 1997 have been constructed on the basis of historic fuel production, use and trade data sets published by the United Nation's Statistical Division UNSTAT (1997), Etemad et al. (1991) and Mitchell (1992, 1993, 1995). The inventories use emission factors variable over time, which have been determined according to changes in technological development. The results indicate that the industrialisation period since 1860 was accompanied by a steady increase in black carbon (BC) and organic carbon (OC) emissions up to 1910. The calculations show a moderate decrease of carbonaceous aerosol emissions between 1920 and 1930, followed by an increase up to 1990, the year when emissions began to decrease again. Changes in BC and OC emissions prior to the year 1950 are essentially driven by the USA, Germany and the UK. The USSR, China and India become substantial contributors to carbonaceous aerosol emissions after 1950. Emission maps have been generated with a 1°×1° resolution based on the relative population density in each country. They will provide a helpful tool for assessing the effect of carbonaceous aerosol emissions on observed climate changes of the past.

  18. A global emission inventory of carbonaceous aerosol from historic records of fossil fuel and biofuel consumption for the period 1860-1997

    NASA Astrophysics Data System (ADS)

    Junker, C.; Liousse, C.

    2008-03-01

    Country by country emission inventories for carbonaceous aerosol for the period 1860 to 1997 have been constructed on the basis of historic fuel production, use and trade data sets published by the United Nation's Statistical Division UNSTAT (1997), Etemad et al. (1991) and Mitchell (1992, 1993, 1995). The inventories use emission factors variable over time, which have been determined according to changes in technological development. The results indicate that the industrialisation period since 1860 was accompanied by a steady increase in black carbon (BC) and primary organic carbon (POC) emissions up to 1910. The calculations show a moderate decrease of carbonaceous aerosol emissions between 1920 and 1930, followed by an increase up to 1990, the year when emissions began to decrease again. Changes in BC and POC emissions prior to the year 1950 are essentially driven by the USA, Germany and the UK. The USSR, China and India become substantial contributors to carbonaceous aerosol emissions after 1950. Emission maps have been generated with a 1°×1° resolution based on the relative population density in each country. They will provide a helpful tool for assessing the effect of carbonaceous aerosol emissions on observed climate changes of the past.

  19. Method to establish the emission inventory of anthropogenic volatile organic compounds in China and its application in the period 2008-2012

    NASA Astrophysics Data System (ADS)

    Wu, Rongrong; Bo, Yu; Li, Jing; Li, Lingyu; Li, Yaqi; Xie, Shaodong

    2016-02-01

    A method was developed to establish a comprehensive anthropogenic VOC emission inventory in China, in which a four-level source categorization was proposed, and an emission factor determination system together with a reference database were developed. And this was applied to establish VOC emission inventories for the period 2008-2012. Results show China's anthropogenic VOC emissions increased from 22.45 Tg in 2008 to 29.85 Tg in 2012 at an annual average rate of 7.38%, with Shandong, Guangdong, Jiangsu, Zhejiang and Hebei provinces being the largest emitters. Industrial processes, transportation and solvent utilization were the key sources, accounting for 39.3%, 25.6%, and 14.9% of the total emissions in 2012, respectively. Passenger cars, biofuel combustion, coke production, field burning of biomass, and raw chemical manufacturing were the primary VOC sources nationwide. The key sources for each province were different because of the disparate industry and energy structure. China's VOC emissions displayed remarkable spatial variation, with emissions in the east and southeast regions being much larger than in the northwest, and the high emission areas mainly centered in the Bohai Economic Rim, the Yangtze River Delta, the Pearl River Delta and the Sichuan Basin. The size of high emission areas expanded over the period 2008-2012, with heavily polluted city clusters gradually emerging.

  20. Socio-demographic Differences in Toxic Release Inventory Siting and Emissions in Metro Atlanta

    PubMed Central

    Johnson, Ryan; Ramsey-White, Kim; Fuller, Christina H.

    2016-01-01

    Prior research has found that low socioeconomic status (SES) populations and minorities in some areas reside in communities with disproportionate exposure to hazardous chemicals. The objectives of this study were to evaluate the relevance of socio-demographic characteristics on the presence of Toxic Release Inventory (TRI) facilities, air releases, and prevalence and resolution of air quality complaints in the 20-county Atlanta Metropolitan Statistical Area (MSA). We found that there were 4.7% more minority residents in census tracts where TRI facilities were located. The odds ratio (OR) for the presence of a TRI facility was 0.89 (p < 0.01) for each 1% increase of females with a college degree and 2.4 (p < 0.01) for households with an income of $22,000–$55,000. The estimated reduction in the amount of chemicals emitted per release associated with population of females with a college degree was 18.53 pounds (p < 0.01). Complaints took longer to resolve in census tracts with higher Hispanic populations (OR = 1.031, 95% CI: 1.010–1.054). Overall, results indicate that SES and race/ethnicity are related to TRI facility siting, releases, and complaints in the Atlanta area. These findings have not been documented previously and suggest that lower SES and non-White communities may be disproportionately exposed. PMID:27455302

  1. Socio-demographic Differences in Toxic Release Inventory Siting and Emissions in Metro Atlanta.

    PubMed

    Johnson, Ryan; Ramsey-White, Kim; Fuller, Christina H

    2016-01-01

    Prior research has found that low socioeconomic status (SES) populations and minorities in some areas reside in communities with disproportionate exposure to hazardous chemicals. The objectives of this study were to evaluate the relevance of socio-demographic characteristics on the presence of Toxic Release Inventory (TRI) facilities, air releases, and prevalence and resolution of air quality complaints in the 20-county Atlanta Metropolitan Statistical Area (MSA). We found that there were 4.7% more minority residents in census tracts where TRI facilities were located. The odds ratio (OR) for the presence of a TRI facility was 0.89 (p < 0.01) for each 1% increase of females with a college degree and 2.4 (p < 0.01) for households with an income of $22,000-$55,000. The estimated reduction in the amount of chemicals emitted per release associated with population of females with a college degree was 18.53 pounds (p < 0.01). Complaints took longer to resolve in census tracts with higher Hispanic populations (OR = 1.031, 95% CI: 1.010-1.054). Overall, results indicate that SES and race/ethnicity are related to TRI facility siting, releases, and complaints in the Atlanta area. These findings have not been documented previously and suggest that lower SES and non-White communities may be disproportionately exposed. PMID:27455302

  2. Socio-demographic Differences in Toxic Release Inventory Siting and Emissions in Metro Atlanta.

    PubMed

    Johnson, Ryan; Ramsey-White, Kim; Fuller, Christina H

    2016-07-23

    Prior research has found that low socioeconomic status (SES) populations and minorities in some areas reside in communities with disproportionate exposure to hazardous chemicals. The objectives of this study were to evaluate the relevance of socio-demographic characteristics on the presence of Toxic Release Inventory (TRI) facilities, air releases, and prevalence and resolution of air quality complaints in the 20-county Atlanta Metropolitan Statistical Area (MSA). We found that there were 4.7% more minority residents in census tracts where TRI facilities were located. The odds ratio (OR) for the presence of a TRI facility was 0.89 (p < 0.01) for each 1% increase of females with a college degree and 2.4 (p < 0.01) for households with an income of $22,000-$55,000. The estimated reduction in the amount of chemicals emitted per release associated with population of females with a college degree was 18.53 pounds (p < 0.01). Complaints took longer to resolve in census tracts with higher Hispanic populations (OR = 1.031, 95% CI: 1.010-1.054). Overall, results indicate that SES and race/ethnicity are related to TRI facility siting, releases, and complaints in the Atlanta area. These findings have not been documented previously and suggest that lower SES and non-White communities may be disproportionately exposed.

  3. Data Build-up for the Construction of Korean Specific Greenhouse Gas Emission Inventory in Livestock Categories

    PubMed Central

    Won, S. G.; Cho, W. S.; Lee, J. E.; Park, K. H.; Ra, C. S.

    2014-01-01

    Many studies on methane (CH4) and nitrous oxide (N2O) emissions from livestock industries have revealed that livestock production directly contributes to greenhouse gas (GHG) emissions through enteric fermentation and manure management, which causes negative impacts on animal environment sustainability. In the present study, three essential values for GHG emission were measured; i.e., i) maximum CH4 producing capacity at mesophilic temperature (37°C) from anaerobically stored manure in livestock category (B0,KM, Korean livestock manure for B0), ii) EF3(s) value representing an emission factor for direct N2O emissions from manure management system S in the country, kg N2O-N kg N−1, at mesophilic (37°C) and thermophilic (55°C) temperatures, and iii) Nex(T) emissions showing annual N excretion for livestock category T, kg N animal−1 yr−1, from different livestock manure. Static incubation with and without aeration was performed to obtain the N2O and CH4 emissions from each sample, respectively. Chemical compositions of pre- and post-incubated manure were analyzed. Contents of total solids (% TS) and volatile solid (% VS), and the ratio of carbon to nitrogen (C/N) decrease significantly in all the samples by C-containing biogas generation, whereas moisture content (%) and pH increased after incubation. A big difference of total nitrogen content was not observed in pre- and post-incubation during CH4 and N2O emissions. CH4 emissions (g CH4 kg VS−1) from all the three manures (sows, layers and Korean cattle) were different and high C/N ratio resulted in high CH4 emission. Similarly, N2O emission was found to be affected by % VS, pH, and temperature. The B0,KM values for sows, layers, and Korean cattle obtained at 37°C are 0.0579, 0.0006, and 0.0828 m3 CH4 kg VS−1, respectively, which are much less than the default values in IPCC guideline (GL) except the value from Korean cattle. For sows and Korean cattle, Nex(T) values of 7.67 and 28.19 kg N yr−1

  4. 500 years of mercury production: global annual inventory by region until 2000 and associated emissions.

    PubMed

    Hylander, Lars D; Meili, Markus

    2003-03-20

    Since pre-industrial times, anthropogenic emissions of Hg have at least doubled global atmospheric Hg deposition rates. In order to minimize environmental and human health effects, efforts have been made to reduce Hg emissions from industries and power plants, while less attention has been paid to Hg mining. This paper is a compilation of available data on primary Hg production and associated emissions with regional and annual resolution since colonial times. Globally, approximately one million tons of metallic Hg has been extracted from cinnabar and other ores during the past five centuries, half already before 1925. Roughly half has been used for mining of gold and silver, but the annual Hg production peaked during a short period of recent industrial uses. Comparison with total historic Hg deposition from global anthropogenic emissions (0.1-0.2 Mtons) suggests that only a few percent of all mined Hg have escaped to the atmosphere thus far. While production of primary Hg has changed dramatically over time and among mines, the global production has always been dominant in the region of the mercuriferous belt between the western Mediterranean and central Asia, but appears to be shifting to the east. Roughly half of the registered Hg has been extracted in Europe, where Spanish mines alone have contributed one third of the world's mined Hg. Approximately one fourth has been mined in the Americas, and most of the remaining registered Hg in Asia. However, the Asian figures may be largely underestimated. Presently, the dominant Hg mines are in Almadén in Spain (236 t of Hg produced in 2000), Khaydarkan in Kyrgyzstan (550 t), Algeria (estimated 240 t) and China (ca. 200 t). Mercury by-production from mining of other metals (e.g. copper, zinc, gold, silver) in 2000 includes 48 t from Peru, 45 t from Finland and at least 15 t from the USA. Since 1970, the recorded production of primary Hg has been reduced by almost an order of magnitude to approximately 2000 t in the year

  5. Speciated OVOC and VOC emission inventories and their implications for reactivity-based ozone control strategy in the Pearl River Delta region, China.

    PubMed

    Ou, Jiamin; Zheng, Junyu; Li, Rongrong; Huang, Xiaobo; Zhong, Zhuangmin; Zhong, Liuju; Lin, Hui

    2015-10-15

    The increasing ground-ozone (O3) levels, accompanied by decreasing SO2, NO2, PM10 and PM2.5 concentrations benefited from air pollution control measures implemented in recent years, initiated a serious challenge to control Volatile Organic Compound (VOC) emissions in the Pearl River Delta (PRD) region, China. Speciated VOC emission inventory is fundamental for estimating Ozone Formation Potentials (OFPs) to identify key reactive VOC species and sources in order to formulate efficient O3 control strategies. With the use of the latest bulk VOC emission inventory and local source profiles, this study developed the PRD regional speciated Oxygenated Volatile Organic Compound (OVOC) and VOC emission inventories to identify the key emission-based and OFP-based VOC sources and species. Results showed that: (1) Methyl alcohol, acetone and ethyl acetate were the major constituents in the OVOC emissions from industrial solvents, household solvents, architectural paints and biogenic sources; (2) from the emission-based perspective, aromatics, alkanes, OVOCs and alkenes made up 39.2%, 28.2%, 15.9% and 10.9% of anthropogenic VOCs; (3) from the OFP-based perspective, aromatics and alkenes become predominant with contributions of 59.4% and 25.8% respectively; (4) ethene, m/p-xylene, toluene, 1,2,4-trimethyl benzene and other 24 high OFP-contributing species were the key reactive species that contributed to 52% of anthropogenic emissions and up to 80% of OFPs; and (5) industrial solvents, industrial process, gasoline vehicles and motorcycles were major emission sources of these key reactive species. Policy implications for O3 control strategy were discussed. The OFP cap was proposed to regulate VOC control policies in the PRD region due to its flexibility in reducing the overall OFP of VOC emission sources in practice.

  6. Estimating Policy-Driven Greenhouse Gas Emissions Trajectories in California: The California Greenhouse Gas Inventory Spreadsheet (GHGIS) Model

    SciTech Connect

    Greenblatt, Jeffery B.

    2013-10-10

    A California Greenhouse Gas Inventory Spreadsheet (GHGIS) model was developed to explore the impact of combinations of state policies on state greenhouse gas (GHG) and regional criteria pollutant emissions. The model included representations of all GHG- emitting sectors of the California economy (including those outside the energy sector, such as high global warming potential gases, waste treatment, agriculture and forestry) in varying degrees of detail, and was carefully calibrated using available data and projections from multiple state agencies and other sources. Starting from basic drivers such as population, numbers of households, gross state product, numbers of vehicles, etc., the model calculated energy demands by type (various types of liquid and gaseous hydrocarbon fuels, electricity and hydrogen), and finally calculated emissions of GHGs and three criteria pollutants: reactive organic gases (ROG), nitrogen oxides (NOx), and fine (2.5 ?m) particulate matter (PM2.5). Calculations were generally statewide, but in some sectors, criteria pollutants were also calculated for two regional air basins: the South Coast Air Basin (SCAB) and the San Joaquin Valley (SJV). Three scenarios were developed that attempt to model: (1) all committed policies, (2) additional, uncommitted policy targets and (3) potential technology and market futures. Each scenario received extensive input from state energy planning agencies, in particular the California Air Resources Board. Results indicate that all three scenarios are able to meet the 2020 statewide GHG targets, and by 2030, statewide GHG emissions range from between 208 and 396 MtCO2/yr. However, none of the scenarios are able to meet the 2050 GHG target of 85 MtCO2/yr, with emissions ranging from 188 to 444 MtCO2/yr, so additional policies will need to be developed for California to meet this stringent future target. A full sensitivity study of major scenario assumptions was also performed. In terms of criteria pollutants

  7. Assessing Satellite-Based Fire Data for use in the National Emissions Inventory

    NASA Technical Reports Server (NTRS)

    Soja, Amber J.; Al-Saadi, Jassim; Giglio, Louis; Randall, Dave; Kittaka, Chieko; Pouliot, George; Kordzi, Joseph J.; Raffuse, Sean; Pace, Thompson G.; Pierce, Thomas E.; Moore, Tom; Biswadev, Roy; Pierce, R. Bradley; Szykman, James J.

    2009-01-01

    Biomass burning is significant to emission estimates because: (1) it can be a major contributor of particulate matter and other pollutants; (2) it is one of the most poorly documented of all sources; (3) it can adversely affect human health; and (4) it has been identified as a significant contributor to climate change through feedbacks with the radiation budget. Additionally, biomass burning can be a significant contributor to a regions inability to achieve the National Ambient Air Quality Standards for PM 2.5 and ozone, particularly on the top 20% worst air quality days. The United States does not have a standard methodology to track fire occurrence or area burned, which are essential components to estimating fire emissions. Satellite imagery is available almost instantaneously and has great potential to enhance emission estimates and their timeliness. This investigation compares satellite-derived fire data to ground-based data to assign statistical error and helps provide confidence in these data. The largest fires are identified by all satellites and their spatial domain is accurately sensed. MODIS provides enhanced spatial and temporal information, and GOES ABBA data are able to capture more small agricultural fires. A methodology is presented that combines these satellite data in Near-Real-Time to produce a product that captures 81 to 92% of the total area burned by wildfire, prescribed, agricultural and rangeland burning. Each satellite possesses distinct temporal and spatial capabilities that permit the detection of unique fires that could be omitted if using data from only one satellite.

  8. Derivation of a New Smoke Emissions Inventory using Remote Sensing, and Its Implications for Near Real-Time Air Quality Applications

    NASA Technical Reports Server (NTRS)

    Ellison, Luke; Ichoku, Charles

    2012-01-01

    A new emissions inventory of particulate matter (PM) is being derived mainly from remote sensing data using fire radiative power (FRP) and aerosol optical depth (AOD) retrievals from the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument, as well as wind data from the Modern Era Retrospective-Analysis for Research and Applications (MERRA) reanalysis dataset, which spans the satellite era. This product is generated using a coefficient of emission, C(sub e), that has been produced on a 1x1 degree global grid such that, when it is multiplied with satellite measurements of FRP or its time-integrated equivalent fire radiative energy (FRE) retrieved over a given area and time period, the corresponding PM emissions are estimated. This methodology of using C(sub e) to derive PM emissions is relatively new and advantageous for near real-time air quality applications compared to current methods based on post-fire burned area that may not provide emissions in a timely manner. Furthermore, by using FRP to characterize a fire s output, it will represent better accuracy than the use of raw fire pixel counts, since fires in individual pixels can differ in size and strength by orders of magnitude, resulting in similar differences in emission rates. Here we will show examples of this effect and how this new emission inventory can properly account for the differing emission rates from fires of varying strengths. We also describe the characteristics of the new emissions inventory, and propose the process chain of incorporating it into models for air quality applications.

  9. Producing remote sensing-based emission estimates of prescribed burning in the contiguous United States for the U.S. Environmental Protection Agency 2011 National Emissions Inventory

    NASA Astrophysics Data System (ADS)

    McCarty, J. L.; Pouliot, G. A.; Soja, A. J.; Miller, M. E.; Rao, T.

    2013-12-01

    Prescribed fires in agricultural landscapes generally produce smaller burned areas than wildland fires but are important contributors to emissions impacting air quality and human health. Currently, there are a variety of available satellite-based estimates of crop residue burning, including the NOAA/NESDIS Hazard Mapping System (HMS) the Satellite Mapping Automated Reanalysis Tool for Fire Incident Reconciliation (SMARTFIRE 2), the Moderate Resolution Imaging Spectroradiometer (MODIS) Official Burned Area Product (MCD45A1)), the MODIS Direct Broadcast Burned Area Product (MCD64A1) the MODIS Active Fire Product (MCD14ML), and a regionally-tuned 8-day cropland differenced Normalized Burn Ratio product for the contiguous U.S. The purpose of this NASA-funded research was to refine the regionally-tuned product utilizing higher spatial resolution crop type data from the USDA NASS Cropland Data Layer and burned area training data from field work and high resolution commercial satellite data to improve the U.S. Environmental Protection Agency's (EPA) National Emissions Inventory (NEI). The final product delivered to the EPA included a detailed database of 25 different atmospheric emissions at the county level, emission distributions by crop type and seasonality, and GIS data. The resulting emission databases were shared with the U.S. EPA and regional offices, the National Wildfire Coordinating Group (NWGC) Smoke Committee, and all 48 states in the contiguous U.S., with detailed error estimations for Wyoming and Indiana and detailed analyses of results for Florida, Minnesota, North Dakota, Oklahoma, and Oregon. This work also provided opportunities in discovering the different needs of federal and state partners, including the various geospatial abilities and platforms across the many users and how to incorporate expert air quality, policy, and land management knowledge into quantitative earth observation-based estimations of prescribed fire emissions. Finally, this work

  10. Modeling global atmospheric CO2 with improved emission inventories and CO2 production from the oxidation of other carbon species

    SciTech Connect

    Nassar, Ray; Jones, DBA; Suntharalingam, P; Chen, j.; Andres, Robert Joseph; Wecht, K. J.; Yantosca, R. M.; Kulawik, SS; Bowman, K; Worden, JR; Machida, T; Matsueda, H

    2010-01-01

    The use of global three-dimensional (3-D) models with satellite observations of CO2 in inverse modeling studies is an area of growing importance for understanding Earth s carbon cycle. Here we use the GEOS-Chem model (version 8-02-01) CO2 mode with multiple modifications in order to assess their impact on CO2 forward simulations. Modifications include CO2 surface emissions from shipping (0.19 PgC yr 1), 3-D spatially-distributed emissions from aviation (0.16 PgC yr 1), and 3-D chemical production of CO2 (1.05 PgC yr 1). Although CO2 chemical production from the oxidation of CO, CH4 and other carbon gases is recognized as an important contribution to global CO2, it is typically accounted for by conversion from its precursors at the surface rather than in the free troposphere. We base our model 3-D spatial distribution of CO2 chemical production on monthly-averaged loss rates of CO (a key precursor and intermediate in the oxidation of organic carbon) and apply an associated surface correction for inventories that have counted emissions of CO2 precursors as CO2. We also explore the benefit of assimilating satellite observations of CO into GEOS-Chem to obtain an observation-based estimate of the CO2 chemical source. The CO assimilation corrects for an underestimate of atmospheric CO abundances in the model, resulting in increases of as much as 24% in the chemical source during May June 2006, and increasing the global annual estimate of CO2 chemical production from 1.05 to 1.18 Pg C. Comparisons of model CO2 with measurements are carried out in order to investigate the spatial and temporal distributions that result when these new sources are added. Inclusion of CO2 emissions from shipping and aviation are shown to increase the global CO2 latitudinal gradient by just over 0.10 ppm (3%), while the inclusion of CO2 chemical production (and the surface correction) is shown to decrease the latitudinal gradient by about 0.40 ppm (10%) with a complex spatial structure

  11. HCFC-142b emissions in China: An inventory for 2000 to 2050 basing on bottom-up and top-down methods

    NASA Astrophysics Data System (ADS)

    Han, Jiarui; Li, Li; Su, Shenshen; Hu, Jianxin; Wu, Jing; Wu, Yusheng; Fang, Xuekun

    2014-05-01

    1-Chloro-1,1-difluoroethane (HCFC-142b) is both ozone depleting substance included in the Montreal Protocol on Substances that Deplete the Ozone Layer (Montreal Protocol) and potent greenhouse gas with high global warming potential. As one of the major HCFC-142b consumption and production countries in the world, China's control action will contribute to both mitigating climate change and protecting ozone layer. Estimating China's HCFC-142b emission is a crucial step for understanding its emission status, drawing up phasing-out plan and evaluating mitigation effect. Both the bottom-up and top-down method were adopted in this research to estimate HCFC-142b emissions from China. Results basing on different methods were compared to test the effectiveness of two methods and validate inventory's reliability. Firstly, a national bottom-up emission inventory of HCFC-142b for China during 2000-2012 was established based on the 2006 IPCC Guidelines for National Greenhouse Gas Inventories and the Montreal Protocol, showing that in contrast to the downward trend revealed by existing results, HCFC-142b emissions kept increasing from 0.1 kt/yr in 2000 to the peak of 14.4 kt/yr in 2012. Meanwhile a top-down emission estimation was also developed using interspecies correlation method. By correlating atmospheric mixing ratio data of HCFC-142b and reference substance HCFC-22 sampled from four representative cities (Beijing, Hangzhou, Lanzhou and Guangzhou, for northern, eastern, western and southern China, respectively), China's HCFC-142b emission in 2012 was calculated. It was 16.24(13.90-18.58) kt, equivalent to 1.06 kt ODP and 37 Tg CO2-eq, taking up 9.78% (ODP) of total HCFCs emission in China or 30.5% of global HCFC-142b emission. This result was 12.7% higher than that in bottom-up inventory. Possible explanations were discussed. The consistency of two results lend credit to methods effectiveness and results reliability. Finally, future HCFC-142b emission was projected to 2050

  12. Sub-region (district) and sector level SO 2 and NO x emissions for India: assessment of inventories and mitigation flexibility

    NASA Astrophysics Data System (ADS)

    Garg, A.; Shukla, P. R.; Bhattacharya, S.; Dadhwal, V. K.

    Sub-regional and sector level distribution of SO 2 and NO x emissions inventories for India have been estimated for all the 466 Indian districts using base data for years 1990 and 1995. Although, national level emissions provide general guidelines for assessing mitigation alternatives, but significant regional and sectoral variability exist in Indian emissions. Districts reasonably capture this variability to a fine grid as 80% of these districts are smaller than 1°×1° resolution with 60% being smaller than even 1/2°×1/2°. Moreover, districts in India have well-established administrative and institutional mechanisms that would be useful for implementing and monitoring measures. District level emission estimates thus offer a finer regional scale inventory covering the combined interests of the scientific community and policy makers. The inventory assessment methodology adopted is similar to that prescribed by the Intergovernmental Panel on Climate Change (IPCC) for greenhouse gas (GHG) emissions. The sectoral decomposition at district level includes emissions from fossil fuel combustion, non-energy emissions from industrial activities and agriculture. Total SO 2 and NO x emissions from India were 3542 and 2636 Gg, respectively (1990) and 4638 and 3462 Gg (1995) growing at annual rate of around 5.5%. The sectoral composition of SO 2 emissions indicates a predominance of electric power generation sector (46%). Power and transport sector emissions equally dominate NO x emissions contributing nearly 30% each. However, majority of power plants are situated in predominantly rural districts while the latter are concentrated in large urban centers. Mitigation efforts for transport sector NO x emissions would therefore be higher. The district level analysis indicates diverse spatial distribution with the top 5% emitting districts contributing 46.5 and 33.3% of total national SO 2 and NO x emissions, respectively. This skewed emission pattern, with a few districts

  13. A comprehensive emission inventory of multiple air pollutants from iron and steel industry in China: Temporal trends and spatial variation characteristics.

    PubMed

    Wang, Kun; Tian, Hezhong; Hua, Shenbing; Zhu, Chuanyong; Gao, Jiajia; Xue, Yifeng; Hao, Jiming; Wang, Yong; Zhou, Junrui

    2016-07-15

    China has become the largest producer of iron and steel throughout the world since 1996. However, as an energy-and-pollution intensive manufacturing sector, a detailed comprehensive emission inventory of air pollutants for iron and steel industry of China is still not available. To obtain and better understand the temporal trends and spatial variation characteristics of typical hazardous air pollutants (HAPs) emissions from iron and steel production in China, a comprehensive emission inventory of multiple air pollutants, including size segregated particulate matter (TSP/PM10/PM2.5), gaseous pollutants (SO2, NOx, CO), heavy metals (Pb, Cd, Hg, As, Cr, Ni etc.), as well as the more dangerous PCDD/Fs, is established with the unit-based annual activity, specific dynamic emission factors for the historical period of 1978-2011, and the future potential trends till to 2050 are forecasted by using scenario analysis. Our results show that emissions of gaseous pollutants and particulate matter have experienced a gradual increase tendency since 2000, while emissions of priority-controlled heavy metals (Hg, Pb, As, Cd, Cr, and Ni) have exhibited a short-term fluctuation during the period of 1990 to 2005. With regard to the spatial distribution of HAPs emissions in base year 2011, Bohai economic circle is identified as the top emission intensity region where iron and steel smelting plants are densely built; within iron and steel industry, blast furnaces contribute the majority of PM emissions, sinter plants account for most of gaseous pollutants and the majority of PCDD/Fs, whereas steel making processes are responsible for the majority of heavy metal emissions. Moreover, comparisons of future emission trends under three scenarios indicate that advanced technologies and integrated whole process management strategies are in great need to further diminish various hazardous air pollutants from iron and steel industry in the future. PMID:27054489

  14. A comprehensive emission inventory of multiple air pollutants from iron and steel industry in China: Temporal trends and spatial variation characteristics.

    PubMed

    Wang, Kun; Tian, Hezhong; Hua, Shenbing; Zhu, Chuanyong; Gao, Jiajia; Xue, Yifeng; Hao, Jiming; Wang, Yong; Zhou, Junrui

    2016-07-15

    China has become the largest producer of iron and steel throughout the world since 1996. However, as an energy-and-pollution intensive manufacturing sector, a detailed comprehensive emission inventory of air pollutants for iron and steel industry of China is still not available. To obtain and better understand the temporal trends and spatial variation characteristics of typical hazardous air pollutants (HAPs) emissions from iron and steel production in China, a comprehensive emission inventory of multiple air pollutants, including size segregated particulate matter (TSP/PM10/PM2.5), gaseous pollutants (SO2, NOx, CO), heavy metals (Pb, Cd, Hg, As, Cr, Ni etc.), as well as the more dangerous PCDD/Fs, is established with the unit-based annual activity, specific dynamic emission factors for the historical period of 1978-2011, and the future potential trends till to 2050 are forecasted by using scenario analysis. Our results show that emissions of gaseous pollutants and particulate matter have experienced a gradual increase tendency since 2000, while emissions of priority-controlled heavy metals (Hg, Pb, As, Cd, Cr, and Ni) have exhibited a short-term fluctuation during the period of 1990 to 2005. With regard to the spatial distribution of HAPs emissions in base year 2011, Bohai economic circle is identified as the top emission intensity region where iron and steel smelting plants are densely built; within iron and steel industry, blast furnaces contribute the majority of PM emissions, sinter plants account for most of gaseous pollutants and the majority of PCDD/Fs, where