Science.gov

Sample records for 1rm bench press

  1. Comparison of muscle force production using the Smith machine and free weights for bench press and squat exercises.

    PubMed

    Cotterman, Michael L; Darby, Lynn A; Skelly, William A

    2005-02-01

    The Smith machine (SM) (vertical motion of bar on fixed path; fixed-form exercise) and free weights (FWs) (free-form path) are commonly used strength training modes. Exercisers may need to alternate between types of equipment, depending on testing, training, rehabilitation, and/or the exercisers' goals. The purposes of this study were to compare muscle force production for SM and FWs using a 1 repetition maximum (1RM) for the parallel back squat and supine bench press exercises and to predict the 1RM for one mode from 1RM on the other mode. Men (n = 16) and women (n = 16) alternately completed 1RM testing for squat and bench press using SM and FWs. Analyses of variance (type of equipment x sex) and linear regression models were calculated. A significant difference was found between bench press and squat 1RMs for each mode of equipment for all participants. The squat 1RM was greater for the SM than the FWs; conversely, the bench 1RM was greater for FWs than the SM. When sex was considered, bench 1RM for FWs was greater than SM for men and women. The squat 1RM was greater for SM than FWs for women only. The 1RM on one mode of equipment was the best predictor of 1RM for the other mode. For both sexes, the equation SM bench 1RM (in kilograms) = -6.76 + 0.95 (FW bench 1RM) can be used. For women only, SM squat 1RM (in kilograms) = 28.3 + 0.73 (FW squat 1RM). These findings provide equations for converting between SM and FW equipment for training. PMID:15705030

  2. One-repetition maximum bench press performance estimated with a new accelerometer method.

    PubMed

    Rontu, Jari-Pekka; Hannula, Manne I; Leskinen, Sami; Linnamo, Vesa; Salmi, Jukka A

    2010-08-01

    The one repetition maximum (1RM) is an important method to measure muscular strength. The purpose of this study was to evaluate a new method to predict 1RM bench press performance from a submaximal lift. The developed method was evaluated by using different load levels (50, 60, 70, 80, and 90% of 1RM). The subjects were active floorball players (n = 22). The new method is based on the assumption that the estimation of 1RM can be calculated from the submaximal weight and the maximum acceleration of the submaximal weight during the lift. The submaximal bench press lift was recorded with a 3-axis accelerometer integrated to a wrist equipment and a data acquisition card. The maximum acceleration was calculated from the measurement data of the sensor and analyzed in personal computer with LabView-based software. The estimated 1RM results were compared with traditionally measured 1RM results of the subjects. An own estimation equation was developed for each load level, that is, 5 different estimation equations have been used based on the measured 1RM values of the subjects. The mean (+/-SD) of measured 1RM result was 69.86 (+/-15.72) kg. The mean of estimated 1RM values were 69.85-69.97 kg. The correlations between measured and estimated 1RM results were high (0.89-0.97; p < 0.001). The differences between the methods were very small (-0.11 to 0.01 kg) and were not significantly different from each other. The results of this study showed promising prediction accuracy for estimating bench press performance by performing just a single submaximal bench press lift. The estimation accuracy is competitive with other known estimation methods, at least with the current study population. PMID:20634755

  3. Contextual interference effects on the acquisition of skill and strength of the bench press.

    PubMed

    Naimo, Marshall A; Zourdos, Michael C; Wilson, Jacob M; Kim, Jeong-Su; Ward, Emery G; Eccles, David W; Panton, Lynn B

    2013-06-01

    The purpose of this study was to investigate contextual interference effects on skill acquisition and strength gains during the learning of the bench press movement. Twenty-four healthy, college-aged males and females were stratified to control, high contextual interference (HCI), and low contextual interference (LCI) groups. Treatment groups were provided with written and visual instruction on proper bench press form and practiced the bench press and dart throwing for four weeks. Within each session, LCI performed all bench press sets before undertaking dart-throws. HCI undertook dart-throws immediately following each set of bench press. Control only did testing. Measurements, including one repetition maximum (1RM), checklist scores based on video recordings of participants' 1RM's, and dart-throw test scores were taken at pre-test, 1 week, 2 week, post-test, and retention test. Results were consistent with the basic premise of the contextual interference effect. LCI had significant improvements in percent 1RM and checklist scores during training, but were mostly absent after training (post-test and retention test). HCI had significant improvements in percent 1RM and checklist scores both during and after training. Thus, HCI may augment strength and movement skill on the bench press since proper technique is an important component of resistance exercise movements. PMID:23726036

  4. Using bench press load to predict upper body exercise loads in physically active individuals.

    PubMed

    Wong, Del P; Ngo, Kwan-Lung; Tse, Michael A; Smith, Andrew W

    2013-01-01

    This study investigated whether loads for assistance exercises of the upper body can be predicted from the loads of the bench press exercise. Twenty-nine physically active collegiate students (age: 22.6 ± 2.5; weight training experience: 2.9 ± 2.1 years; estimated 1RM bench press: 54.31 ± 14.60 kg; 1RM: body weight ratio: 0.80 ± 0.22; BMI: 22.7 ± 2.1 kg·m(-2)) were recruited. The 6RM loads for bench press, barbell bicep curl, overhead dumbbell triceps extension, hammer curl and dumbbell shoulder press were measured. Test-retest reliability for the 5 exercises as determined by Pearson product moment correlation coefficient was very high to nearly perfect (0.82-0.98, p < 0.01). The bench press load was significantly correlated with the loads of the 4 assistance exercises (r ranged from 0.80 to 0.93, p < 0.01). Linear regression revealed that the bench press load was a significant (R(2) range from 0.64 to 0.86, p < 0.01) predictor for the loads of the 4 assistance exercises. The following 6RM prediction equations were determined: (a) Hammer curl = Bench press load (0.28) + 6.30 kg, (b) Barbell biceps curl = Bench press load (0.33) + 6.20 kg, (c) Overhead triceps extension = Bench press load (0.33) - 0.60 kg, and (d) Dumbbell shoulder press = Bench press load (0.42) + 5.84 kg. The difference between the actual load and the predicted load using the four equations ranged between 6.52% and 8.54%, such difference was not significant. Fitness professionals can use the 6RM bench press load as a time effective and accurate method to predict training loads for upper body assistance exercises. Key pointsThe bench press load was significantly correlated with the loads of the 4 assistance exercises.No significant differences were found between the actual load and the predicted load in the four equations.6RM bench press load can be a time effective and accurate method to predict training loads for upper body assistance exercises. PMID:24149723

  5. Muscular endurance repetitions to predict bench press strength in men of different training levels.

    PubMed

    Mayhew, J L; Prinster, J L; Ware, J S; Zimmer, D L; Arabas, J R; Bemben, M G

    1995-06-01

    The purpose of this study was to determine the accuracy of predicting maximal bench press (BP) strength (1-RM) from relative endurance performance in various groups of men. The subjects included untrained students (n = 35), resistance trained students (n = 28), college wrestlers (n = 21), soccer players (n = 22), football players (n = 51), high school students (n = 35), and resistance-trained middle-aged men (n = 24). Each subject performed a 1-RM test according to the same standard procedure. Within 4-10 days, the subject selected a weight to perform as many repetitions as possible to failure. Six relative endurance prediction equations produced validity coefficients of r = 0.86 to 0.98 in each group and r = 0.82 to 0.98 in the composite group (n = 220). In subjects completing < or = 10 repetitions-to-failure, three equations significantly overpredicted and two significantly underpredicted 1-RM scores. The Brzycki equation was the most accurate. In subjects completing > 10 repetitions to failure, three equations significantly overpredicted and three significantly underpredicted 1-RM scores. While caution should be used when employing relative muscular endurance performance to estimate 1-RM strength in the bench press, the average of two equations may reduce the error. PMID:7500624

  6. Effects of different vibration exercises on bench press.

    PubMed

    Marín, P J; Torres-Luque, G; Hernández-García, R; García-López, D; Garatachea, N

    2011-10-01

    This study was undertaken to analyze the effects of different vibration recovery strategies via feet or hands on the number of repetitions performed and on mean velocity, peak velocity and blood lactate concentration during consecutive bench-press sets. 9 elite judo athletes performed 3 sets of bench press at 60% of one-repetition maximum (1RM), leading to failure and allowing a 180 s rest period between sets. During the rest period, 1 of the 3 following procedures was performed: 150 s rest plus 30 s push-up vibration exercise (Push-up), 150 s rest plus 30 s squat vibration exercise (Squat) or 180 s only rest (Passive). Statistical analysis revealed that the Squat condition resulted in a significant increase in the number of repetitions achieved, in comparison with all other rest strategies. However, kinematic parameters and blood lactate concentration were not affected by vibration. These data suggest that a vibration stimulus applied to the feet, between sets, can result in positive improvements in upper body resistance exercise performance. Although the mechanisms are not fully understood, this positive effect of vibration could be due to an increased motor cortex excitability and voluntary drive. PMID:21590639

  7. Efficacy of the National Football League-225 Test to Track Changes in One Repetition Maximum Bench Press After Training in National Collegiate Athletic Association Division IA Football Players.

    PubMed

    Mann, J Bryan; Ivey, Pat A; Stoner, Josh D; Mayhew, Jerry L; Brechue, William F

    2015-11-01

    Numerous investigations have attested to the efficacy of the National Football League (NFL)-225 test to estimate one repetition maximum (1RM) bench press. However, no studies have assessed the efficacy of the test to track changes in strength across a training program. The purpose of this study was to determine the accuracy of the NFL-225 test for determining the change in 1RM bench press in National Collegiate Athletic Association Division IA college football players after training. Over a 4-year period, players (n = 203) were assessed before and after a 6-week off-season resistance program for 1RM bench press and repetitions completed with 102.3 kg (225 lbs). Test sessions typically occurred within 1 week of each other. Players significantly increased 1RM by 4.2 ± 8.6 kg and NFL-225 repetitions by 0.9 ± 2.3, although the effect size (ES) for each was trivial (ES = 0.03 and 0.07, respectively). National Football League 225 prediction equations had higher correlations with 1RM before training (intraclass correlation coefficient [ICC] = 0.95) than after training (ICC = 0.75). The correlation between the change in NFL-225 repetitions and change in 1RM was low and negative (r = -0.22, p < 0.02). Short-term heavy resistance training may alter the association between muscular strength and muscular endurance in college football players and render the NFL-225 test less effective in predicting the change in 1RM bench press strength after short-term training. PMID:25574610

  8. Free-Weight Augmentation With Elastic Bands Improves Bench Press Kinematics in Professional Rugby Players.

    PubMed

    García-López, David; Hernández-Sánchez, Sonsoles; Martín, Esperanza; Marín, Pedro J; Zarzosa, Fernando; Herrero, Azael J

    2016-09-01

    García-López, D, Hernández-Sánchez, S, Martín, E, Marín, PJ, Zarzosa, F, and Herrero, AJ. Free-weight augmentation with elastic bands improves bench press kinematics in professional rugby players. J Strength Cond Res 30(9): 2493-2499, 2016-This study aimed to investigate the effects of combining elastic bands to free weight resistance (EB + FWR) on the acceleration-deceleration and velocity profiles of the bench press in professional rugby players and recreationally trained subjects. Sixteen male subjects (8 rugby players and 8 recreationally trained subjects) were randomly assigned to complete 2 experimental conditions in a crossover fashion: EB + FWR and FWR. In both conditions, subjects performed 1 bench press set to volitional exhaustion with a load equivalent to the 85% of 1 repetition maximum (1RM). In the EB + FWR condition, the contribution of elastic resistance was approximately 20% of the selected load (85% 1RM). Results indicate that EB + FWR condition increased significantly the range of concentric movement in which the barbell is accelerated. This increase was significantly higher in rugby players (35%) in comparison with recreationally trained subjects (13%). Maximal velocity was also increased in EB + FWR (17%), when compared with FWR condition. These results suggest that when combined with variable resistance (i.e., EB), the external resistance seems to be more evenly distributed over the full range of motion, decreasing the need for dramatic deceleration at the end of the concentric phase. The present data also indicate that the kinematic benefits of an EB + FWR approach seems to be more prominent in athletes from modalities in which high level of strength and power are required (i.e., rugby players). PMID:24448004

  9. Reliability Analysis of Traditional and Ballistic Bench Press Exercises at Different Loads

    PubMed Central

    García-Ramos, Amador; Padial, Paulino; García-Ramos, Miguel; Conde-Pipó, Javier; Argüelles-Cienfuegos, Javier; Štirn, Igor; Feriche, Belén

    2015-01-01

    The purpose of this study was to determine test–retest reliability for peak barbell velocity (Vpeak) during the bench press (BP) and bench press throw (BPT) exercises for loads corresponding to 20–70% of one-repetition maximum (1RM). Thirty physically active collegiate men conducted four evaluations after a preliminary BP 1RM determination (1RM·bw-1 = 1.02 ± 0.16 kg·kg-1). In counterbalanced order, participants performed two sessions of the BP in one week and two sessions of the BPT in another week. Recovery time between sessions within the same week was 48 hours and recovery time between sessions of different weeks was 120 hours. On each day of evaluation the individual load-velocity relationship at each tenth percentile (20–70% of 1RM) in a Smith machine for the BP or BPT was determined. Participants performed three attempts per load, but only the best repetition (highest Vpeak), registered by a linear position transducer, was analysed. The BPT resulted in a significantly lower coefficient of variation (CV) for the whole load–velocity relationship, compared to the BP (2.48% vs. 3.22%; p = 0.040). Test–retest intraclass correlation coefficients (ICCs) ranged from r = 0.94–0.85 for the BPT and r = 0.91–0.71 for the BP (p < 0.001). The reduction in the biological within-subject variation in BPT exercise could be promoted by the braking phase that obligatorily occurs during a BP executed with light or moderate loads. Therefore, we recommend the BPT exercise for a most accurate assessment of upper-body velocity. PMID:26557190

  10. The Acute Effect of Upper-Body Complex Training on Power Output of Martial Art Athletes as Measured by the Bench Press Throw Exercise

    PubMed Central

    Liossis, Loudovikos Dimitrios; Forsyth, Jacky; Liossis, Ceorge; Tsolakis, Charilaos

    2013-01-01

    The purpose of this study was to examine the acute effect of upper body complex training on power output, as well as to determine the requisite preload intensity and intra-complex recovery interval needed to induce power output increases. Nine amateur-level combat/martial art athletes completed four distinct experimental protocols, which consisted of 5 bench press repetitions at either: 65% of one-repetition maximum (1RM) with a 4 min rest interval; 65% of 1RM with an 8 min rest; 85% of 1RM with a 4 min rest; or 85% of 1RM with an 8 min rest interval, performed on different days. Before (pre-conditioning) and after (post-conditioning) each experimental protocol, three bench press throws at 30% of 1RM were performed. Significant differences in power output pre-post conditioning were observed across all experimental protocols (F=26.489, partial eta2=0.768, p=0.001). Mean power output significantly increased when the preload stimulus of 65% 1RM was matched with 4 min of rest (p=0.001), and when the 85% 1RM preload stimulus was matched with 8 min of rest (p=0.001). Moreover, a statistically significant difference in power output was observed between the four conditioning protocols (F= 21.101, partial eta2=0.913, p=0.001). It was concluded that, in complex training, matching a heavy preload stimulus with a longer rest interval, and a lighter preload stimulus with a shorter rest interval is important for athletes wishing to increase their power production before training or competition. PMID:24511352

  11. The effects of grip width on sticking region in bench press.

    PubMed

    Gomo, Olav; Van Den Tillaar, Roland

    2016-01-01

    The aim of this study was to examine the occurrence of the sticking region by examining how three different grip widths affect the sticking region in powerlifters' bench press performance. It was hypothesised that the sticking region would occur at the same joint angle of the elbow and shoulder independent of grip width, indicating a poor mechanical region for vertical force production at these joint angles. Twelve male experienced powerlifters (age 27.7 ± 8.8 years, mass 91.9 ± 15.4 kg) were tested in one repetition maximum (1-RM) bench press with a narrow, medium and wide grip. Joint kinematics, timing, bar position and velocity were measured with a 3D motion capture system. All participants showed a clear sticking region with all three grip widths, but this sticking region was not found to occur at the same joint angles in all three grip widths, thereby rejecting the hypothesis that the sticking region would occur at the same joint angle of the elbow and shoulder independent of grip width. It is suggested that, due to the differences in moment arm of the barbell about the elbow joint in the sticking region, there still might be a poor mechanical region for total force production that is joint angle-specific. PMID:26055260

  12. Fracture of the Scaphoid During a Bench-Press Exercise.

    PubMed

    Mason, John S; Crowell, Michael S; Goss, Donald L

    2015-08-01

    The patient was a 21-year-old male cadet at a military academy who was evaluated by a physical therapist in a direct-access capacity for a chief complaint of left wrist pain that began 1 day after injuring his wrist while performing a bench-press exercise. Due to concern for a scaphoid fracture and because radiographic imaging was not immediately available, a physical therapist credentialed to utilize fluoroscopy evaluated the left wrist. Radiographs were subsequently ordered, which confirmed a mid-waist, nondisplaced scaphoid fracture. PMID:26232322

  13. A comparison of force curve profiles between the bench press and ballistic bench throws.

    PubMed

    Clark, Ross A; Bryant, Adam L; Humphries, Brendan

    2008-11-01

    The purpose of this study was to compare the peak force and force curve characteristics during a traditional bench press (BP) and a ballistic bench throw (BT). Eight (age = 21.0 +/- 2.3 years, height = 182.3 +/- 7.4 cm, body mass = 85.9 +/- 5.5 kg) semi-professional rugby league players with resistance and power training experience performed both BP and BT exercises at loads of 55 and 80% of their predicted one-repetition maximum. The force curves for each test were then divided into three intensity levels, set at low to moderate (0-75%), high (75-95%), and near-maximal force (95-100%). These values were obtained by determining the percentage of the range of motion (ROM) in which the force produced during each test was within these thresholds. The BT exercise produced significantly (p < 0.05) higher peak force than BP under both loading conditions. A significantly greater portion of the ROM during the 80% BT was at a high intensity in comparison with the BP. No significant differences were found between force intensity conditions at 55% loads. It can be concluded that performing the BT exercise results in a greater peak force output when compared with the traditional BP movement under both resistance training and maximal power loading conditions. Furthermore, performing the BT exercise with heavy loads results in a more efficient training method for maintaining high force levels throughout the ROM. PMID:18978630

  14. Muscle power output properties using the stretch-shortening cycle of the upper limb and their relationships with a one-repetition maximum bench press.

    PubMed

    Miyaguchi, Kazuyoshi; Demura, Shinichi

    2006-05-01

    The purpose of this study was to examine the output properties of muscle power by the dominant upper limb using SSC, and the relationships between the power output by SSC and a one-repetition maximum bench press (1 RM BP) used as a strength indicator of the upper body. Sixteen male athletes (21.4+/-0.9 yr) participated in this study. They pulled a load of 40% of maximum voluntary contraction (MVC) at a stretch by elbow flexion of the dominant upper limb in the following three preliminary conditions: static relaxed muscle state (SR condition), isometric muscle contraction state (ISO condition), and using SSC (SSC condition). The velocity with a wire load via a pulley during elbow flexion was measured accurately using a power instrument with a rotary encoder, and the muscle power curve was drawn from the product of the velocity and load. Significant differences were found among all evaluation parameters of muscle power exerted from the above three conditions and the parameters regarding early power output during concentric contraction were larger in the SSC condition than the SR and ISO conditions. The parameters on initial muscle contraction velocity when only using SSC significantly correlated with 1 RM BP (r=0.60-0.62). The use of SSC before powerful elbow flexion may contribute largely to early explosive power output during concentric contraction. Bench press capacity relates to a development of the above early power output when using SSC. PMID:16763366

  15. Effect of Fatigue Upon Performance and Electromyographic Activity in 6-RM Bench Press

    PubMed Central

    van den Tillaar, Roland; Saeterbakken, Atle

    2014-01-01

    The aim of this study was to examine the effect of fatigue during one set of 6-RM bench pressing upon the muscle patterning and performance. Fourteen resistance-trained males (age 22.5±2.0 years, stature 1.82±0.07 m, body mass 82.0±7.8 kg) conducted a 6-RM bench press protocol. Barbell kinematics and EMG activity of pectoralis major, deltoid anterior, biceps brachii, triceps brachii, rectus abdominis, oblique external and erector spinae were measured in each repetition during the 6-RM bench press. Total lifting time increased and the velocity in the ascending movement decreased (p≤0.001). However, the kinematics in the descending phase deferred: the time decreased and velocity increased during the 6-RM (p≤0.001). Generally, muscles increased their EMG amplitude during the six repetitions in the ascending movement, while only three of the seven measured muscles showed an increase over the six repetitions in the descending part in 6-RM bench pressing. It was concluded that the bench pressing performance decreased (lower barbell velocities and longer lifting times) with increasing fatigue in the 6-RM execution. Furthermore EMG increased in the prime movers and the trunk stabilizers (abdominal and spine), while the antagonist muscle (biceps) activity was not affected by fatigue during the lifting phase in a single set of 6-RM bench pressing PMID:25031673

  16. Location of Instability During a Bench Press Alters Movement Patterns and Electromyographical Activity.

    PubMed

    Nairn, Brian C; Sutherland, Chad A; Drake, Janessa D M

    2015-11-01

    Instability training devices with the bench press exercise are becoming increasingly popular. Typically, the instability device is placed at the trunk/upper body (e.g., lying on a Swiss ball); however, a recent product called the Attitube has been developed, which places the location of instability at the hands by users lifting a water-filled tube. Therefore, the purpose of this study was to analyze the effects of different instability devices (location of instability) on kinematic and electromyographical patterns during the bench press exercise. Ten healthy males were recruited and performed 1 set of 3 repetitions for 3 different bench press conditions: Olympic bar on a stable bench (BENCH), Olympic bar on a stability ball (BALL), and Attitube on a stable bench (TUBE). The eccentric and concentric phases were analyzed in 10% intervals while electromyography was recorded from 24 electrode sites, and motion capture was used to track elbow flexion angle and 3-dimensional movement trajectories and vertical velocity of the Bar/Attitube. The prime movers tended to show a reduction in muscle activity during the TUBE trials; however, pectoralis major initially showed increased activation during the eccentric phase of the TUBE condition. The trunk muscle activations were greatest during the TUBE and smallest during the BAR. In addition, the TUBE showed decreased range of elbow flexion and increased medial-lateral movement of the Attitube itself. The results further support the notion that instability devices may be more beneficial for trunk muscles rather than prime movers. PMID:25932979

  17. Bench Press Upper-Body Muscle Activation Between Stable and Unstable Loads.

    PubMed

    Dunnick, Dustin D; Brown, Lee E; Coburn, Jared W; Lynn, Scott K; Barillas, Saldiam R

    2015-12-01

    The bench press is one of the most commonly used upper-body exercises in training and is performed with many different variations, including unstable loads (ULs). Although there is much research on use of an unstable surface, there is little to none on the use of an UL. The purpose of this study was to investigate muscle activation during the bench press while using a stable load (SL) vs. UL. Twenty resistance-trained men (age = 24.1 ± 2 years; ht = 177.5 ± 5.8 cm; mass = 88.7 ± 13.7 kg) completed 2 experimental conditions (SL and UL) at 2 different intensities (60 and 80% one repetition maximum). Unstable load was achieved by hanging 16 kg kettlebells by elastic bands from the end of the bar. All trial lifts were set to a 2-second cadence with a slight pause at the bottom. Subjects had electrodes attached to 5 muscles (pectoralis major, anterior deltoid, medial deltoid, triceps brachii, and latissimus dorsi) and performed 3 isometric bench press trials to normalize electromyographic data. All 5 muscles demonstrated significantly greater activation at 80% compared with 60% load and during concentric compared with eccentric actions. These results suggest that upper body muscle activation is not different in the bench press between UL and SL. Therefore, coaches should use their preference when designing training programs. PMID:26540024

  18. An Electromyograph Comparison of an Isokenetic Bench Press at Three Speeds.

    ERIC Educational Resources Information Center

    Ridgeway, M.; And Others

    The muscle action potentials (MAP) of the anterior deltoid, pectoralis major, biceps brachii, and the triceps muscle were studied by quantitative electromyography (emg) during a bench press exercise at three controlled speeds. Bipolar surface electrodes with standard placement were employed throughout the study. Eleven volunteer college women…

  19. Effects of 5 Weeks of Bench Press Training on Muscle Synergies: A Randomized Controlled Study.

    PubMed

    Kristiansen, Mathias; Samani, Afshin; Madeleine, Pascal; Hansen, Ernst A

    2016-07-01

    Kristiansen, M, Samani, A, Madeleine, P, and Hansen, EA. Effects of 5 weeks of bench press training on muscle synergies: A randomized controlled study. J Strength Cond Res 30(7): 1948-1959, 2016-The ability to perform forceful muscle contractions has important implications in sports performance and in activities of daily living. However, there is a lack of knowledge on adaptations in intermuscular coordination after strength training. The purpose of this study was therefore to assess muscle synergies before and after 5 weeks of bench press training. Thirty untrained male subjects were randomly allocated to a training group (TRA) or a control group (CON). After the pretest, TRA completed 5 weeks of bench press training, before completing a posttest, whereas subjects in CON continued their normal life. During test sessions, surface electromyography (EMG) was recorded from 13 different muscles. Muscle synergies were extracted from EMG data using nonnegative matrix factorization. To evaluate differences between pretest and posttest, we performed a cross-correlation analysis and a cross-validation analysis, in which the synergy components extracted in the pretest session were recomputed, using the fixed synergy components from the posttest session. Two muscle synergies accounted for 90% of the total variance and reflected the concentric and eccentric phase, respectively. TRA significantly increased 3 repetition maximum in bench press with 19.0% (25th; 75th percentile, 10.3%; 21.7%) (p < 0.001), whereas no change occurred in CON. No significant differences were observed in synergy components between groups. However, decreases in correlation values for intragroup comparisons in TRA may suggest that the synergy components changed, whereas this was not the case in CON. Strength and conditioning professionals may consider monitoring changes in muscle synergies in training and rehabilitation programs as a way to benchmark changes in intermuscular coordination. PMID:26645673

  20. Effect of Different Interrepetition Rest Periods on Barbell Velocity Loss During the Ballistic Bench Press Exercise.

    PubMed

    García-Ramos, Amador; Padial, Paulino; Haff, G Gregory; Argüelles-Cienfuegos, Javier; García-Ramos, Miguel; Conde-Pipó, Javier; Feriche, Belén

    2015-09-01

    This study investigated the effect of introducing different interrepetition rest (IRR) periods on the ability to sustain maximum bench press throw velocity with a range of loads commonly used to develop upper-body power. Thirty-four physically active collegiate men (age: 21.5 ± 2.8 years; body mass: 75.2 ± 7.2 kg; height: 176.9 ± 4.9 cm) were tested during 2 consecutive weeks. During the first week, the maximum dynamic strength (repetition maximum [RM]) in bench press exercise was determined (RM = 76.7 ± 13.2 kg). The following week, 3 testing sessions were conducted with 48 hours apart in random order. In each day of evaluation, only 1 load (30%RM, 40%RM, or 50%RM) was assessed in the bench press throw exercise. With each load, subjects performed 3 single sets of 15 repetitions (15-minute interset rest) with 3 different sets configurations: continuous repetitions (CR), 6 seconds of IRR (IRR6), and 12 seconds of IRR (IRR12). The decrease of peak velocity (PV) was significantly lower for IRR12 compared with CR and IRR6 at least since the repetition 4. No differences between CR and IRR6 protocols were found until the repetition 7 at 30%RM and 40%RM and until the repetition 5 at 50%RM. The decrease of PV during the CR protocol was virtually linear for the 3 loads analyzed (r > 0.99); however, this linear relationship became weaker for IRR6 (r = 0.79-0.95) and IRR12 (r = 0.35-0.87). These results demonstrate that IRR periods allow increasing the number of repetitions before the onset of significant velocity losses. PMID:26308827

  1. Long Rest Interval Promotes Durable Testosterone Responses in High-Intensity Bench Press.

    PubMed

    Scudese, Estevão; Simão, Roberto; Senna, Gilmar; Vingren, Jakob L; Willardson, Jeffrey M; Baffi, Matheus; Miranda, Humberto

    2016-05-01

    Scudese, E, Simão, R, Senna, G, Vingren, JL, Willardson, JM, Baffi, M, and Miranda, H. Long rest interval promotes durable testosterone responses in high-intensity bench press. J Strength Cond Res 30(5): 1275-1286, 2016-The purpose of this study was to examine the influence of rest period duration (1 vs. 3 minute between sets) on acute hormone responses to a high-intensity and equal volume bench press workout. Ten resistance-trained men (25.2 ± 5.6 years; 78.2 ± 5.7 kg; 176.7 ± 5.4 cm; bench press relative strength: 1.3 ± 0.1 kg per kilogram of body mass) performed 2 bench press workouts separated by 1 week. Each workout consisted of 5 sets of 3 repetitions performed at 85% of 1 repetition maximum, with either 1- or 3-minute rest between sets. Circulating concentrations of total testosterone (TT), free testosterone (FT), cortisol (C), testosterone/cortisol ratio (TT/C), and growth hormone (GH) were measured at preworkout (PRE), and immediately (T0), 15 minutes (T15), and 30 minutes (T30) postworkout. Rating of perceived exertion was recorded before and after each set. For TT, both rest lengths enhanced all postexercise verifications (T0, T15, and T30) compared with PRE, with 1 minute showing decreases on T15 and T30 compared with T0. For FT, both 1- and 3-minute rest protocols triggered augmentations on distinct postexercise moments (T0 and T15 for 1 minute; T15 and T30 for 3-minute) compared with PRE. The C values did not change throughout any postexercise verification for either rests. The TT/C ratio was significantly elevated for both rests in all postexercise moments compared with PRE. Finally, GH values did not change for both rest lengths. In conclusion, although both short and long rest periods enhanced acute testosterone values, the longer rest promoted a long-lasting elevation for both TT and FT. PMID:26466135

  2. Validation of an optical encoder during free weight resistance movements and analysis of bench press sticking point power during fatigue.

    PubMed

    Drinkwater, Eric J; Galna, Brook; McKenna, Michael J; Hunt, Patrick H; Pyne, David B

    2007-05-01

    During the concentric movement of the bench press, there is an initial high-power push after chest contact, immediately followed by a characteristic area of low power, the so-called "sticking region." During high-intensity lifting, a decline in power can result in a failed lift attempt. The purpose of this study was to determine the validity of an optical encoder to measure power and then employ this device to determine power changes during the initial acceleration and sticking region during fatiguing repeated bench press training. Twelve subjects performed a free weight bench press, a Smith Machine back squat, and a Smith Machine 40-kg bench press throw for power validation measures. All barbell movements were simultaneously monitored using cinematography and an optical encoder. Eccentric and concentric mean and peak power were calculated using time and position data derived from each method. Validity of power measures between the video (criterion) and optical encoder scores were evaluated by standard error of the estimate (SEE) and coefficient of variation (CV). Seven subjects then performed 4 sets of 6 free weight bench press repetitions progressively increasing from 85 to 95% of their 6 repetition maximum, with each repetition continually monitored by an optical encoder. The SEE for power ranged from 3.6 to 14.4 W (CV, 1.0-3.0%; correlation, 0.97-1.00). During the free weight bench press training, peak power declined by approximately 55% (p < 0.01) during the initial acceleration phase of the final 2 repetitions of the final set. Although decreases in power of the sticking point were significant (p < 0.01), as early as repetition 5 (-40%) they reached critically low levels in the final 2 repetitions (>-95%). In conclusion, the optical encoder provided valid measures of kinetics during free weight resistance training movements. The decline in power during the initial acceleration phase appears a factor in a failed lift attempt at the sticking point. PMID

  3. The Effect of Rest Interval Length on Repetition Consistency and Perceived Exertion During Near Maximal Loaded Bench Press Sets.

    PubMed

    Scudese, Estevão; Willardson, Jeffrey M; Simão, Roberto; Senna, Gilmar; de Salles, Belmiro F; Miranda, Humberto

    2015-11-01

    The purpose of this study was to compare different rest intervals between sets on repetition consistency and ratings of perceived exertion (RPE) during consecutive bench press sets with an absolute 3RM (3 repetition maximum) load. Sixteen trained men (23.75 ± 4.21 years; 74.63 ± 5.36 kg; 175 ± 4.64 cm; bench press relative strength: 1.44 ± 0.19 kg/kg of body mass) attended 4 randomly ordered sessions during which 5 consecutive sets of the bench press were performed with an absolute 3RM load and 1, 2, 3, or 5 minutes of rest interval between sets. The results indicated that significantly greater bench press repetitions were completed with 2, 3, and 5 minutes vs. 1-minute rest between sets (p ≤ 0.05); no significant differences were noted between the 2, 3, and 5 minutes rest conditions. For the 1-minute rest condition, performance reductions (relative to the first set) were observed commencing with the second set; whereas for the other conditions (2, 3, and 5 minutes rest), performance reductions were not evident until the third and fourth sets. The RPE values before each of the successive sets were significantly greater, commencing with the second set for the 1-minute vs. the 3 and 5 minutes rest conditions. Significant increases were also evident in RPE immediately after each set between the 1 and 5 minutes rest conditions from the second through fifth sets. These findings indicate that when utilizing an absolute 3RM load for the bench press, practitioners may prescribe a time-efficient minimum of 2 minutes rest between sets without significant impairments in repetition performance. However, lower perceived exertion levels may necessitate prescription of a minimum of 3 minutes rest between sets. PMID:24045632

  4. Distorting Genetic Research about Cancer: From Bench Science to Press Release to Published News1

    PubMed Central

    Brechman, Jean M.; Lee, Chul-joo; Cappella, Joseph

    2014-01-01

    This study considered genetic research relating to cancer outcomes and behaviors, specifically investigating the extent to which claims made in press releases (N=23) and mainstream print media (N=71) were fairly derived from their original presentation in scholarly journals (N=20). Central claims expressing gene-outcome relationships were evaluated by a large pool (N=40) of genetics graduate students. Raters judged press release claims as significantly more representative of material within the original science journal article compared with news article claims. Claims originating in news articles which demonstrated contact with individuals not directly involved in the research were judged by experts to be more representative of the original science as compared with those that demonstrated contact with individuals directly involved in the research. PMID:25580022

  5. Confinement studies of reversed field pinch plasma on TPE-1RM20

    SciTech Connect

    Yagi, Yasuyuki; Hirano, Yoichi; Maejima, Yoshiki; Shimada, Toshio; Hirota, Isao

    1995-04-01

    Confinement properties of a reversed field pinch (RFP), TPE-1RM20, are intensively presented. Plasma current, I{sub p}, dependencies of confinement properties are particularly shown in comparison with the forerunner machine, TPE-1RM15. The results without any active density controls are presented in this paper. It is shown that both machines have almost the same, relatively high, I/N values (<= 12 x 10{sup -14} Am) and the poloidal beta, {Beta}{sub p} (= 0.1) and they do not change very much with I{sub p}, where N is the column density. The energy confinement time, {tau}{sub E}, linearly increases with I{sub p} and the behavior of the resistive part of the loop voltage has an important role to the I{sub p} dependence of {tau}{sub E}. 8 refs., 3 figs.

  6. LISA Optical Bench Testing

    NASA Astrophysics Data System (ADS)

    Tröbs, M.; d'Arcio, L.; Barke, S.; Bogenstahl, J.; Diekmann, C.; Fitzsimons, E. D.; Gerberding, O.; Hennig, J.; Hey, F. G.; Hogenhuis, H.; Killow, C. J.; Lieser, M.; Lucarelli, S.; Nikolov, S.; Perreur-Lloyd, M.; Pijnenburg, J.; Robertson, D. I.; Sohmer, A.; Taylor, A.; Ward, H.; Weise, D.; Heinzel, G.; Danzmann, K.

    2013-01-01

    Each LISA satellite carries optical benches, one for each test mass, that measure the distance to the local test mass and to the remote optical bench on the distant satellite. Currently, an elegant bread board of the optical bench is developed for the European Space Agency (ESA) by EADS Astrium, TNO Science and Technology, University of Glasgow and the Albert Einstein Institute. To test the optical bench the two interferometers mentioned above must be completed by an external simulator, the test mass and telescope simulator. We give an overview of the simulator layout and performance predictions.

  7. Drill Presses.

    ERIC Educational Resources Information Center

    Engelbrecht, Nancy; And Others

    These instructional materials provide an orientation to the drill press for use at the postsecondary level. The first of seven sections lists seven types of drill presses. The second section identifies 14 drill press parts. The third section lists 21 rules for safe use of drilling machines. The fourth section identifies the six procedures for…

  8. Interrelationships between different loads in resisted sprints, half-squat 1 RM and kinematic variables in trained athletes.

    PubMed

    Martínez-Valencia, María Asunción; González-Ravé, José M; Santos-García, Daniel Juárez; Alcaraz Ramón, Pedro E; Navarro-Valdivielso, Fernando

    2014-01-01

    Resisted sprint running is a common training method for improving sprint-specific strength. It is well-known that an athlete's time to complete a sled-towing sprint increases linearly with increasing sled load. However, to our knowledge, the relationship between the maximum load in sled-towing sprint and the sprint time is unknown, The main purpose of this research was to analyze the relationship between the maximum load in sled-towing sprint, half-squat maximal dynamic strength and the velocity in the acceleration phase in 20-m sprint. A second aim was to compare sprint performance when athletes ran under different conditions: un-resisted and towing sleds. Twenty-one participants (17.86 ± 2.27 years; 1.77 ± 0.06 m and 69.24 ± 7.20 kg) completed a one repetition maximum test (1 RM) from a half-squat position (159.68 ± 22.61 kg) and a series of sled-towing sprints with loads of 0, 5, 10, 15, 20, 25, 30% body mass (Bm) and the maximum resisted sprint load. No significant correlation (P<0.05) was found between half-squat 1 RM and the sprint time in different loaded conditions. Conversely, significant correlations (P<0.05) were found between maximum load in resisted sprint and sprint time (20-m sprint time, r=-0.71; 5% Bm, r=-0.73; 10% Bm, r=-0.53; 15% Bm, r=-0.55; 20% Bm, r=-0.65; 25% Bm, r=-0.44; 30% Bm, r=-0.63; MaxLoad, r= 0.93). The sprinting velocity significantly decreased by 4-22% with all load increases. Stride length (SL) also decreased (17%) significantly across all resisted conditions. In addition, there were significant differences in stride frequency (SF) with loads over 15% Bm. It could be concluded that the knowledge of the individual maximal load in resisted sprint and the effects on the sprinting kinematic with different loads, could be interesting to determinate the optimal load to improve the acceleration phase at sprint running. PMID:24444204

  9. LISA Optical Bench Testbed

    NASA Astrophysics Data System (ADS)

    Lieser, M.; d'Arcio, L.; Barke, S.; Bogenstahl, J.; Diekmann, C.; Diepholz, I.; Fitzsimons, E. D.; Gerberding, O.; Henning, J.-S.; Hewitson, M.; Hey, F. G.; Hogenhuis, H.; Killow, C. J.; Lucarelli, S.; Nikolov, S.; Perreur-Lloyd, M.; Pijnenburg, J.; Robertson, D. I.; Sohmer, A.; Taylor, A.; Tröbs, M.; Ward, H.; Weise, D.; Heinzel, G.; Danzmann, K.

    2013-01-01

    The optical bench (OB) is a part of the LISA spacecraft, situated between the telescope and the testmass. For measuring the inter-spacecraft distances there are several interferometers on the OB. The elegant breadboard of the OB for LISA is developed for the European Space Agency (ESA) by EADS Astrium, TNO Science & Industry, University of Glasgow and the Albert Einstein Intitute (AEI), the performance tests then will be done at the AEI. Here we present the testbed that will be used for the performance tests with the focus on the thermal environment and the laser infrastructure.

  10. Astrophysics on the Lab Bench

    ERIC Educational Resources Information Center

    Hughes, Stephen W.

    2010-01-01

    In this article some basic laboratory bench experiments are described that are useful for teaching high school students some of the basic principles of stellar astrophysics. For example, in one experiment, students slam a plastic water-filled bottle down onto a bench, ejecting water towards the ceiling, illustrating the physics associated with a…

  11. The Apennine Bench Formation revisited

    NASA Technical Reports Server (NTRS)

    Spudis, P. D.; Hawke, B. R.

    1985-01-01

    The Apennine Bench Formation consists of pre-mare light plains materials that crop out south of the crater Archimedes, inside the Imbrium basin. This material was ascribed to either impact or volcanic origins. The characteristics of Apollo 15 KREEP basalts and the Apennine Bench Formation are reviewed to determine whether their characteristics are compatible with a volcanic origin.

  12. Press Start

    NASA Astrophysics Data System (ADS)

    Harteveld, Casper

    This level sets the stage for the design philosophy called “Triadic Game Design” (TGD). This design philosophy can be summarized with the following sentence: it takes two to tango, but it takes three to design a meaningful game or a game with a purpose. Before the philosophy is further explained, this level will first delve into what is meant by a meaningful game or a game with a purpose. Many terms and definitions have seen the light and in this book I will specifically orient at digital games that aim to have an effect beyond the context of the game itself. Subsequently, a historical overview is given of the usage of games with a serious purpose which starts from the moment we human beings started to walk on our feet till our contemporary society. It turns out that we have been using games for all kinds of non-entertainment purposes for already quite a long time. With this introductory material in the back of our minds, I will explain the concept of TGD by means of a puzzle. After that, the protagonist of this book, the game Levee Patroller, is introduced. Based on the development of this game, the idea of TGD, which stresses to balance three different worlds, the worlds of Reality, Meaning, and Play, came into being. Interested? Then I suggest to quickly “press start!”

  13. Differences in unilateral chest press muscle activation and kinematics on a stable versus unstable surface while holding one versus two dumbbells

    PubMed Central

    Patterson, Jeffrey M.; Oppenheimer, Nicole E.; Feser, Erin H.

    2015-01-01

    Training the bench press exercise on a traditional flat bench does not induce a level of instability as seen in sport movements and activities of daily living. Twenty participants were recruited to test two forms of instability: using one dumbbell rather than two and lifting on the COR bench compared to a flat bench. Electromyography (EMG) amplitudes of the pectoralis major, middle trapezius, external oblique, and internal oblique were recorded and compared. Differences in range of motion (ROM) were evaluated by measuring an angular representation of the shoulder complex. Four separate conditions of unilateral bench press were tested while lifting on a: flat bench with one dumbbell, flat bench with two dumbbells, COR Bench with one dumbbell, and COR Bench with two dumbbells. The results imply that there are no differences in EMG amplitude or ROM between the COR bench and traditional bench. However, greater ROM was found to be utilized in the single dumbbell condition, both in the COR bench and the flat bench. PMID:26528421

  14. Astrophysics on the lab bench

    NASA Astrophysics Data System (ADS)

    Hughes, Stephen W.

    2010-05-01

    In this article some basic laboratory bench experiments are described that are useful for teaching high school students some of the basic principles of stellar astrophysics. For example, in one experiment, students slam a plastic water-filled bottle down onto a bench, ejecting water towards the ceiling, illustrating the physics associated with a type II supernova explosion. In another experiment, students roll marbles up and down a double ramp in an attempt to get a marble to enter a tube halfway up the slope, which illustrates quantum tunnelling in stellar cores. The experiments are reasonably low cost to either purchase or manufacture.

  15. The VORTEX coronagraphic test bench

    NASA Astrophysics Data System (ADS)

    Jolivet, A.; Piron, P.; Huby, E.; Absil, O.; Delacroix, C.; Mawet, D.; Surdej, J.; Habraken, S.

    2014-07-01

    In this paper, we present the infrared coronagraphic test bench of the University of Liège named VODCA (Vortex Optical Demonstrator for Coronagraphic Applications). The goal of the bench is to assess the performances of the Annular Groove Phase Masks (AGPMs) at near- to mid-infrared wavelengths. The AGPM is a subwavelength grating vortex coronagraph of charge two (SGVC2) made out of diamond. The bench is designed to be completely achromatic and will be composed of a super continuum laser source emitting in the near to mid-infrared, several parabolas, diaphragms and an infrared camera. This way, we will be able to test the different AGPMs in the M, L, K and H bands. Eventually, the bench will also allow the computation of the incident wavefront aberrations on the coronagraph. A reflective Lyot stop will send most of the stellar light to a second camera to perform low-order wavefront sensing. This second system coupled with a deformable mirror will allow the correction of the wavefront aberrations. We also aim to test other pre- and/or post-coronagraphic concepts such as optimal apodization.

  16. Reciprocating pellet press

    DOEpatents

    Jones, Charles W.

    1981-04-07

    A machine for pressing loose powder into pellets using a series of reciprocating motions has an interchangeable punch and die as its only accurately machines parts. The machine reciprocates horizontally between powder receiving and pressing positions. It reciprocates vertically to press, strip and release a pellet.

  17. The Global University Press

    ERIC Educational Resources Information Center

    Dougherty, Peter J.

    2012-01-01

    The modern world's understanding of American university press has long been shaped by university-press books. American university-press books are good international advertisements for the universities whose logos grace their spines. The growth of transnational scholarship and the expansion of digital communications networks are converging in ways…

  18. Dry pressing technical ceramics

    SciTech Connect

    Lewis, W.A. Jr.

    1996-04-01

    Dry pressing of technical ceramics is a fundamental method of producing high-quality ceramic components. The goals of dry pressing technical ceramics are uniform compact size and green density, consistent part-to-part green density and defect-free compact. Dry pressing is the axial compaction of loosely granulated dry ceramic powders (< 3% free moisture) within a die/punch arrangement. The powder, under pressure, conforms to the specific shape of the punch faces and die. Powder compaction occurs within a rigid-walled die and usually between a top and bottom punch. Press configurations include anvil, rotary, multiple-punch and multiple-action.

  19. High School Press Pressures.

    ERIC Educational Resources Information Center

    Rogers, Luella P.

    History shows that the high school press suffers through cycles that reflect economic factors and cultural climates within communities, states, and the nation. The direction of that cycle in the 1960s and early 1970s was toward more open, free-flowing information by a vigorous student press, but those economic and cultural signs now are pointing…

  20. Lyndon Johnson's Press Conferences.

    ERIC Educational Resources Information Center

    Cooper, Stephen

    Because President Lyndon Johnson understood well the publicity value of the American news media, he sought to exploit them. He saw reporters as "torch bearers" for his programs and policies and used the presidential press conference chiefly for promotional purposes. Although he met with reporters often, his press conferences were usually…

  1. Pressing Temperature and Enzyme Treatment Effects on Small Scale Blueberry Juice Recovery

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Making blueberry juice has multiple steps, and to evaluate how these steps influence juice recovery, bench top and pilot scale experiments were performed. In lab scale trials, southern highbush and rabbiteye blueberries were pressed at varying temperatures. Temperatures included fresh, frozen then ...

  2. Trashing the Press.

    ERIC Educational Resources Information Center

    McMasters, Paul

    1994-01-01

    Discusses ominous assaults on press freedom on college campuses across the United States. Laments the lack of concern about First Amendment issues involved in these incidents, in which student newspapers have been stolen, trashed, and burned. (SR)

  3. 27 CFR 9.233 - Kelsey Bench-Lake County.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Kelsey Bench-Lake County... Kelsey Bench-Lake County. (a) Name. The name of the viticultural area described in this section is “Kelsey Bench-Lake County”. For purposes of part 4 of this chapter, “Kelsey Bench-Lake County,”...

  4. Metabolic cost of aerobic dance bench stepping at varying cadences and bench heights.

    PubMed

    Grier, Tamara D; Lloyd, Lisa K; Walker, John L; Murray, Tinker D

    2002-05-01

    To determine the metabolic and cardiovascular responses of aerobic dance bench stepping (ADBS) at commonly used cadences and bench heights, 30 women (19-47 years of age) performed a graded maximal treadmill test and four 8-minute submaximal ADBS routines. Subjects followed identical videotape sequences of basic ADBS movements at cadences of 125 and 130 beats.min(-1) at bench heights of 6 and 8 in. Physiological measurements were taken during each minute of each test. Mean values calculated from the last 3 minutes were used for data analysis. Although there were no physiological differences between ADBS at the 2 cadences, there were significant physiological differences between ADBS at the 2 bench heights. On average, a 2-in. increase in bench height, increased heart rate, VO2, and rating of perceived exertion by 10 beats.min(-1), 3.09 ml.kg(-1) min(-1), and 1.53, respectively. In conclusion, it appears that bench height is more of a factor than cadence in increasing metabolic cost of ADBS. Results from this study provide information about the energy cost of ADBS at the common bench heights and cadences used in this study and, therefore, may be used to help aerobic participants select the proper bench height and cadence combination to control body weight and develop cardiorespiratory fitness safely and effectively. PMID:11991777

  5. A do-it-yourself optical bench

    NASA Astrophysics Data System (ADS)

    Dvořák, Leoš

    2011-10-01

    When teaching geometrical optics, especially the parts concerning lenses, there are many experiments that can be done just by holding the lenses in your (or your pupils') hands. But if you want to measure something, for example focal lengths, or combine two lenses to demonstrate the principle of a telescope, then something that can fix the lenses is needed. Of course, we can do such demonstrations and measurements using a commercially available optical bench. But a classical optical bench is usually a large and heavy construction that is not easy to transport. Often only one (or even none) may be available per classroom. In many school experiments something less robust, simpler, and less expensive would perhaps suit the needs better. Here we describe a simple and flexible optical bench that may be constructed by students themselves. Apart from the price of the lenses, the construction is also very cheap. So, if you have some spare lenses available, you can build a small optical bench for 10 or less. Each group of students can then use their own optical bench to do experiments.

  6. Press-On Optics

    ERIC Educational Resources Information Center

    Thorson, Jon C.

    1972-01-01

    The article discusses the design, application, and clinical uses of press-on optics which are descirbed as 1 millimeter thick, flexible lenses or prisms that may be produced in virtually any desired plus or minus dioptric power as ophthalmic lenses, or in any range of usable prism diopter power. (GW)

  7. Meet the Press

    ERIC Educational Resources Information Center

    Quick, Brian L.

    2004-01-01

    Objective: To field questions from a room of students simulating a press conference. Type of speech: Impromptu. Point value: 10 participation points. To receive all 10 points, students must (1) address three questions from the lectern and ask three questions from their seat (3 points), (2) respond thoroughly to each question by providing a…

  8. Optically Aligned Drill Press

    NASA Technical Reports Server (NTRS)

    Adderholdt, Bruce M.

    1994-01-01

    Precise drill press equipped with rotary-indexing microscope. Microscope and drill exchange places when turret rotated. Microscope axis first aligned over future hole, then rotated out of way so drill axis assumes its precise position. New procedure takes less time to locate drilling positions and produces more accurate results. Apparatus adapted to such other machine tools as milling and measuring machines.

  9. Drill Press Work Sample.

    ERIC Educational Resources Information Center

    Shawsheen Valley Regional Vocational-Technical High School, Billerica, MA.

    This manual contains a work sample intended to assess a handicapped student's interest in and to screen interested students into a training program in basic machine shop I. (The course is based on the entry level of the drill press operator.) Section 1 describes the assessment, correlates the work performed and worker traits required for…

  10. Bench-scale co-processing

    SciTech Connect

    Nafis, D.A.; Gatsis, J.G.; Lea, C.; Miller, M.A.

    1990-03-07

    The objective of this current is to extend and optimize UOP's single-stage slurry-catalyzed co-processing scheme, which has developed under previous Contract AC22-84PC70002. Particular emphasis is given to defining and improving catalyst utilization and costs, evaluating alternative and disposable slurry-catalyst systems, and improving catalyst recycle and recovery techniques. The work during this quarter involved a series of bench-scale runs using a new Mo-based slurry catalyst. The results of bench-scale Runs 24 and 25 are discussed in the following report. 7 refs., 4 figs., 3 tabs.

  11. Evaluation of a Bench Top Mechanical Delinter

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This presentation will report on current research associated with a new mechancial delinter being developed at the Cotton Production and Processing Research Unit in conjunction with Cotton Inc. A bench-top version of the new mechanical delinter was built and evaluated to determine operational speeds...

  12. An MCAO test bench for NFIRAOS

    NASA Astrophysics Data System (ADS)

    Turri, Paolo; Andersen, David R.; Véran, Jean-Pierre; Spanò, Paolo; Rosensteiner, Matthias; McVeigh, Eric A.

    2014-08-01

    At NRC Herzberg - Astronomy we are developing a closed-loop multi-conjugate adaptive optics bench to simulate a scaled-down version of NFIRAOS, the first light MCAO system on the Thirty Meter Telescope. The current bench consists of four laser guide stars, an evenly spaced array of natural guide stars, two magnetic deformable mirrors, a Shack-Hartmann wavefront sensor and a science camera at the focal plane for the evaluation of the performance and the tip-tilt measurements. Three phase screens conjugated at different altitudes simulate the atmospheric perturbation over the telescope. We can recreate the spot elongation on the SHWFS by defocusing the ground DM and at the same time modulating the intensity of the LGS spots in order to simulate the timevarying density profile of the sodium layer. The goals of this experiment are to compare the experimental performance on the bench with the predicted results of NFIRAOS models and to test the robustness of the tomographic reconstruction under conditions including the use of faint guide stars, non-uniform density profiles of the sodium layer and known non-common path aberrations. In this paper we present an update on the status of the bench and some first results.

  13. SUPERFUND TREATABILITY CLEARINGHOUSE: BENGART AND MEMEL (BENCH-SCALE), GULFPORT (BENCH AND PILOT-SCALE), MONTANA POLE (BENCH-SCALE), AND WESTERN PROCESSING (BENCH-SCALE) TREATABILITY STUDIES

    EPA Science Inventory

    This document presents summary data on the results of various treatability studies (bench and pilot scale), conducted at three different sites where soils were contaminated with dioxins or PCBs. The synopsis is meant to show rough performance levels under a variety of differen...

  14. Mathematical Lens: How Much Can You Bench?

    ERIC Educational Resources Information Center

    Bolognese, Chris A.

    2013-01-01

    "How Much Can You Bench?" appears in the "Mathematical Lens" section of "Mathematics Teacher." "Mathematical Lens" uses photographs as a springboard for mathematical inquiry and appears in every issue of "Mathematics Teacher." This month the mathematics behind the photograph includes finding areas…

  15. Acute L-arginine alpha ketoglutarate supplementation fails to improve muscular performance in resistance trained and untrained men

    PubMed Central

    2012-01-01

    Background Dietary supplements containing L-arginine are marketed to improve exercise performance, but the efficacy of such supplements is not clear. Therefore, this study examined the efficacy of acute ingestion of L-arginine alpha-ketoglutarate (AAKG) muscular strength and endurance in resistance trained and untrained men. Methods Eight resistance trained and eight untrained healthy males ingested either 3000mg of AAKG or a placebo 45 minutes prior to a resistance exercise protocol in a randomized, double-blind crossover design. One-repetition maximum (1RM) on the standard barbell bench press and leg press were obtained. Upon determination of 1RM, subjects completed repetitions to failure at 60% 1RM on both the standard barbell bench press and leg press. Heart rate was measured pre and post exercise. One week later, subjects ingested the other supplement and performed the identical resistance exercise protocol. Results Our data showed statistical significant differences (p<0.05) between resistance trained and untrained males for both 1RM and total load volume (TLV; multiply 60% of 1RM times the number of repetitions to failure) for the upper body. However, 1RM and TLV were not statistically different (p>0.05) between supplementation conditions for either resistance trained or untrained men in the bench press or leg press exercises. Heart rate was similar at the end of the upper and lower body bouts of resistance exercise with AAKG vs. placebo. Conclusion The results from our study indicate that acute AAKG supplementation provides no ergogenic benefit on 1RM or TLV as measured by the standard barbell bench press and leg press, regardless of the subjects training status. PMID:22510253

  16. Four Theories of the Press.

    ERIC Educational Resources Information Center

    Siebert, Fred S.; And Others

    A systematic understanding of the press requires an understanding of the social and political structures within which the press operates. This book discusses four theories that have determined the kind of press the Western world has had: authoritarian, libertarian, socially responsible, and Soviet communist. Each chapter discusses press…

  17. 14. SOUTHWEST TO PUMP REPAIR WORK BENCH, WITH ELECTRIC PIPE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. SOUTHWEST TO PUMP REPAIR WORK BENCH, WITH ELECTRIC PIPE THREADER AT RIGHT END OF BENCH. WOODEN BINS BENEATH THE BENCH CONTAIN THREADED PIPE, JOINTS, AND TOOLS. THE SOUTH FRONT OF THE FACTORY IS VISIBLE IN THE BACKGROUND. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

  18. BENCH SCALE SALTSTONE PROCESS DEVELOPMENT MIXING STUDY

    SciTech Connect

    Cozzi, A.; Hansen, E.

    2011-08-03

    The Savannah River National Laboratory (SRNL) was requested to develop a bench scale test facility, using a mixer, transfer pump, and transfer line to determine the impact of conveying the grout through the transfer lines to the vault on grout properties. Bench scale testing focused on the effect the transfer line has on the rheological property of the grout as it was processed through the transfer line. Rheological and other physical properties of grout samples were obtained prior to and after pumping through a transfer line. The Bench Scale Mixing Rig (BSMR) consisted of two mixing tanks, grout feed tank, transfer pump and transfer hose. The mixing tanks were used to batch the grout which was then transferred into the grout feed tank. The contents of the feed tank were then pumped through the transfer line (hose) using a progressive cavity pump. The grout flow rate and pump discharge pressure were monitored. Four sampling stations were located along the length of the transfer line at the 5, 105 and 205 feet past the transfer pump and at 305 feet, the discharge of the hose. Scaling between the full scale piping at Saltstone to bench scale testing at SRNL was performed by maintaining the same shear rate and total shear at the wall of the transfer line. The results of scaling down resulted in a shorter transfer line, a lower average velocity, the same transfer time and similar pressure drops. The condition of flow in the bench scale transfer line is laminar. The flow in the full scale pipe is in the transition region, but is more laminar than turbulent. The resulting plug in laminar flow in the bench scale results in a region of no-mixing. Hence mixing, or shearing, at the bench scale should be less than that observed in the full scale, where this plug is non existent due to the turbulent flow. The bench scale tests should be considered to be conservative due to the highly laminar condition of flow that exists. Two BSMR runs were performed. In both cases, wall

  19. ELT oriented adaptive optics demonstration bench

    NASA Astrophysics Data System (ADS)

    LeRoux, B.; NDiaye, M.; El Hadi, K.

    2011-09-01

    We are developing an Adaptive Optics bench designed to validate experimentally new instrumental concepts dedicated to Extremely Large Telescopes (ELTs). Our AO bench is being developed with three main objectives. The first one concerns the experimental study of control solutions for two levels of correction systems, such as woofer-tweeter systems. Indeed, the use of two consecutive deformable mirrors (DM), necessary for most of AO insruments on E-ELT, rises correction and command problems to be optimized. Our two mirrors (a 140 actuators DM and a Phase Modulator LCoS mirror) are being fully characterized before closing the AO loop. The second goal is the experimental validation of the Pyramid Wave Front Sensor (PWFS) in ELTs conditions with a Laser Guide Star (LGS). The design of our PWFS is undergoing and the LGS tests will take place by the end of 2013. All these studies are led in collaboration with University of Bologna, ONERA and L2TI. The third and longer term application is the experimental validation of an optimized control law dedicated to the large number of degrees of freedom, based on Kalman filtering and studied at LAM. We present the optical design of the bench, the calibrations of the elements and the first experimental results.

  20. CIDER PRESS, LOOKING SOUTHEAST ACROSS THE SCHUYLKILL RIVER. THIS PRESS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CIDER PRESS, LOOKING SOUTHEAST ACROSS THE SCHUYLKILL RIVER. THIS PRESS, CARVED OUT OF A LARGE BOULDER AT THE RIVERS EDGE, PROBABLY DATES FROM THE LIFETIME OF JOHN BARTRAM, IF NOT TO THE SWEDISH SETTLERS BEFORE HIM. THE IRON FENCE IS A NINETEENTH-CENTURY ADDITION - John Bartram House & Garden, 54th Street & Lindbergh Boulevard, Philadelphia, Philadelphia County, PA

  1. PRESS SHOP. SEVEN BLISS PRESSES STAMP OUT A VARIETY OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PRESS SHOP. SEVEN BLISS PRESSES STAMP OUT A VARIETY OF CARTRIDGE AND SHELL CASINGS. THIS DEPARTMENT WAS TRANSFORMED FROM A MONEY-LOSING OPERATION TO A PROFIT CENTER UNDER THE FIRST WORKER-MANAGED QUALITY CIRCLE IN THE PLANT. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

  2. The CIA and the Press.

    ERIC Educational Resources Information Center

    Carvalho, Bernardo A.

    The involvement of the Central Intelligence Agency (CIA) with both United States and foreign news media has been recorded in numerous publications. This report reviews the important aspects of the CIA-press relationships as they have appeared in print and discusses the implications of these relationsihps for the credibility of the press. Media…

  3. Press, Politics and Popular Government.

    ERIC Educational Resources Information Center

    Will, George F., Ed.

    A panel discussion on politics and the press was held at the convention of the American Political Science Association in September 1971. This volume contains an essay delivered at that panel on the various functions or activities of the press--adversary, surrogate, sovereign--and remarks of the three discussants. In addition, an essay especially…

  4. Driving Torque Control for a Nacelle Test Bench

    NASA Astrophysics Data System (ADS)

    Jassmann, Uwe; Reiter, Matthias; Abel, Dirk

    2014-06-01

    Recently wind industry paid a lot of attention to ground testing facilities in order to improve reliability of wind turbines by undergoing overall system tests at an early stage of development. Some experience has been gained during the last years with drive train test benches, that allow for pure mechanical and electrical tests of the turbine's components. Since the loads occurring inside a wind turbine significantly depend on its control strategy, the natural extension of drive train test benches are so-called nacelle test benches, which also include the wind turbine's controller. The worldwide first nacelle test bench was installed and launched at RWTH Aachen University in 2013. This nacelle test bench was set up as a demonstrator and has a rated power of 1 MW. For the demonstrator test bench a gearbox-based drive train concept, which does not intrinsically meet the high dynamic requirements of the real-time aerodynamics simulation, was chosen. In this paper the mechanical concept is reviewed from a control engineering point of view and a detailed control model is presented and validated using measurement data. In order to minimize the impact this mechanical limitations have and to achieve the dynamics and accuracy required, a driving torque controller is proposed. Due to the communication layout at the nacelle test bench, time delay in data transfer cannot be omitted for controller design. Experiments confirm that the driving torque controller allows to operate a wind turbine at the nacelle test bench and suppresses unrealistic, test bench-related torque dynamics.

  5. The Press Research Centre, 1956-1976.

    ERIC Educational Resources Information Center

    Press Research Centre, Krakow (Poland).

    In 1956, the Press Research Centre was established in Cracow, Poland by a group of journalists and publishers, for the purpose of instituting press research that would have practical applications. The aims of the Centre were to conduct studies on the history of the Polish press, the contemporary press, press readership, and editorial techniques.…

  6. Calibration of the MCAO Canopus Bench

    NASA Astrophysics Data System (ADS)

    Garcia-Rissmann, Aurea; Rigaut, François; Bec, Matthieu; Boccas, Maxime; Galvez, Ramon; Gausachs, Gaston; Gratadour, Damien; Neichel, Benoit

    The final phase of implementation of all optical components, as well as their integration and tests on the Canopus MCAO bench is currently underway. We present here a detailed description of the LGS and NGS WFS calibration sequences implemented through MYST (MCAO Yorick Smart Tool), a yorick+python+glade software package developed in-house which allows multiple users to control and monitor the bench remotely over the network using EPICS commands. A fine tuning of the optical setup and a better understanding of the flexure/temperature dependencies is being carried out and will allow us to build the many look-up tables to be eventually used by the system (e.g. telescope primary and secondary mirrors). Preliminary work on non-common path aberrations to account for the static aberrations in the central 60 arcsec science field of view (FoV) has been done iteratively using a science focal plane wavefront sensor and has shown good results both in individual directions as well as simultaneously over the entire FoV, the latter using the tomographic approach (presented in another paper in this conference).

  7. Manganese removal during bench-scale biofiltration.

    PubMed

    Burger, Mark S; Mercer, Stephen S; Shupe, Gordon D; Gagnon, Graham A

    2008-12-01

    As biological manganese (Mn) removal becomes a more popular water treatment technology, there is still a large gap in understanding the key mechanisms and range of operational characteristics. This research aimed to expand on previous bench-scale experiments by directly comparing small filtration columns inoculated with indigenous biofilms from a Mn filtration plant and filtration columns inoculated with a liquid suspension of Leptothrix discophora SP-6. Batch tests found that in the absence of manganese oxidizing bacteria Mn was not removed by air alone, whereas a mixed population and Leptothrix strain achieved greater than 90% removal of Mn. The bench-scale biofiltration experiments found that biological filters can be inoculated with a pure culture of L. discophora SP-6 and achieve a similar removal of indigenous biofilm. While Mn oxidizing bacteria (MOB) seem to be necessary for the auto-catalytic nature of these biological filters, Mn removal is achieved with a combination of adsorption to Mn oxides and biological oxidation. Additionally, it was demonstrated that biological Mn removal is possible over a broader "field of activity" (e.g., Mn removal occurred at a pH level as low as 6.5) than has previously been reported. The ability of this treatment technology to work over a broader range of influent conditions allows for more communities to consider biological treatment as an option to remove Mn from their drinking water. PMID:18809196

  8. Thermal motion of the STIS optical bench

    NASA Technical Reports Server (NTRS)

    Gull, Theodore R.; Taylor, Mary Jane; Shaw, Richard; Robinson, Richard; Hill, Robert S.

    1997-01-01

    Various tests have been done of the Space Telescope Imaging Spectrograph (STIS) using internal wavecals to measure thermal motion of the spectral format on the detectors. In most cases, the spectral format moves less than the specification not to exceed 0.2 pixels per hour. Primary causes of the motion are (1) changes to the thermal design dictated by the warmer Aft Shroud environment and (2) on-orbit power cycling of Multi-Anode Microchannel Arrays (MAMA) electronics to minimize the effects of radiation hits on the MAMA detectors. The rear portion of the STIS optical bench is too warm to be held at a constant temperature by internal heaters. Electronics swing in temperature with an orbital and daily frequency. The thermal drift of the optical formats is not negligible, but is well behaved in most circumstances. The observer is advised to examine the trade-off between the most accurate wavelengths with best spectral/spatial resolutions versus increased overheads that directly affect the observing times. A long term concern is that the Aft Shroud thermal environment is predicted to heat up as much as one Centigrade degree per year. Progressively more of the bench would move out of thermal control. Thus the external cooler for STIS, being considered for the Third Servicing Mission is of major importance to the long term operation of STIS.

  9. 40 CFR Appendix Vii to Part 86 - Standard Bench Cycle (SBC)

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... VII Appendix VII to Part 86—Standard Bench Cycle (SBC) 1. The standard bench aging durability procedures consist of aging a catalyst-oxygen-sensor system on an aging bench which follows the standard bench cycle (SBC) described in this appendix. 2. The SBC requires use of an aging bench with an...

  10. 40 CFR Appendix Vii to Part 86 - Standard Bench Cycle (SBC)

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... VII to Part 86—Standard Bench Cycle (SBC) 1. The standard bench aging durability procedures consist of aging a catalyst-oxygen-sensor system on an aging bench which follows the standard bench cycle (SBC) described in this appendix. 2. The SBC requires use of an aging bench with an engine as the source of...

  11. 40 CFR Appendix Vii to Part 86 - Standard Bench Cycle (SBC)

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... VII Appendix VII to Part 86—Standard Bench Cycle (SBC) 1. The standard bench aging durability procedures consist of aging a catalyst-oxygen-sensor system on an aging bench which follows the standard bench cycle (SBC) described in this appendix. 2. The SBC requires use of an aging bench with an...

  12. 40 CFR Appendix Vii to Part 86 - Standard Bench Cycle (SBC)

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... VII Appendix VII to Part 86—Standard Bench Cycle (SBC) 1. The standard bench aging durability procedures consist of aging a catalyst-oxygen-sensor system on an aging bench which follows the standard bench cycle (SBC) described in this appendix. 2. The SBC requires use of an aging bench with an...

  13. 40 CFR Appendix Vii to Part 86 - Standard Bench Cycle (SBC)

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... VII Appendix VII to Part 86—Standard Bench Cycle (SBC) 1. The standard bench aging durability procedures consist of aging a catalyst-oxygen-sensor system on an aging bench which follows the standard bench cycle (SBC) described in this appendix. 2. The SBC requires use of an aging bench with an...

  14. Investing in a Large Stretch Press

    NASA Technical Reports Server (NTRS)

    Choate, M.; Nealson, W.; Jay, G.; Buss, W.

    1986-01-01

    Press for forming large aluminum parts from plates provides substantial economies. Study assessed advantages and disadvantages of investing in large stretch-forming press, and also developed procurement specification for press.

  15. 40 CFR 89.315 - Analyzer bench checks.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Analyzer bench checks. 89.315 Section 89.315 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Emission Test Equipment Provisions § 89.315 Analyzer bench checks....

  16. 40 CFR 90.323 - Analyzer bench checks.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Analyzer bench checks. 90.323 Section 90.323 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Test Equipment Provisions § 90.323 Analyzer bench...

  17. 27. August 1974. BENCH SHOP, VIEW LOOKING NORTHWEST, SHOWING THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. August 1974. BENCH SHOP, VIEW LOOKING NORTHWEST, SHOWING THE L. POWERS & CO. JOINTER AND ITS BELT CHASE, THE PATTERNS, THE GRUBER-BUILT WHEEL BARROW, AND JACOB H. GRUBER'S WHEELWRIGHT BENCH. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  18. BENCH TEST OF A RESIDUAL GAS IONIZATION PROFILE MONITOR (RGIPM)

    SciTech Connect

    W.C. SELLYEY; J.D. GILPATRICK; R. SENIOR

    2001-06-01

    An RGIPM has been designed, constructed and bench tested to verify that all components are functioning properly and that the desired resolution of about 50 {micro}m rms can be achieved. This paper will describe major considerations that went into the bench test and some results.

  19. 40 CFR 89.315 - Analyzer bench checks.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Analyzer bench checks. 89.315 Section 89.315 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Emission Test Equipment Provisions § 89.315 Analyzer bench checks....

  20. 40 CFR 90.323 - Analyzer bench checks.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Analyzer bench checks. 90.323 Section 90.323 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Test Equipment Provisions § 90.323 Analyzer bench...

  1. 40 CFR 91.323 - Analyzer bench checks.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Analyzer bench checks. 91.323 Section 91.323 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Emission Test Equipment Provisions § 91.323 Analyzer bench checks. (a) Prior to initial...

  2. 69. (Credit JTL) View beneath marble meter bench showing hydraulic ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    69. (Credit JTL) View beneath marble meter bench showing hydraulic lines leading to water valve hydraulic control cylinders from control handles in bench; strings and pulleys activate meters. - McNeil Street Pumping Station, McNeil Street & Cross Bayou, Shreveport, Caddo Parish, LA

  3. 40 CFR 90.323 - Analyzer bench checks.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Analyzer bench checks. 90.323 Section 90.323 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... Provisions § 90.323 Analyzer bench checks. (a) Prior to initial use and after major repairs, verify that...

  4. RHIC electron lens test bench diagnostics

    SciTech Connect

    Gassner, D.; Beebe, E.; Fischer, W.; Gu, X.; Hamdi, K.; Hock, J.; Liu, C.; Miller, T.; Pikin, A.; Thieberger, P.

    2011-05-16

    An Electron Lens (E-Lens) system will be installed in RHIC to increase luminosity by counteracting the head-on beam-beam interaction. The proton beam collisions at the RHIC experimental locations will introduce a tune spread due to a difference of tune shifts between small and large amplitude particles. A low energy electron beam will be used to improve luminosity and lifetime of the colliding beams by reducing the betatron tune shift and spread. In preparation for the Electron Lens installation next year, a test bench facility will be used to gain experience with many sub-systems. This paper will discuss the diagnostics related to measuring the electron beam parameters.

  5. Alternative Bench Standards: Sample Production Report

    SciTech Connect

    N. R. Mann; T. P. Houghton; M. G. Watrous; J. G. Eisenmenger; R. K. Hague

    2012-09-01

    The INL has prepared four standards representing krypton concentrations of 1.1X, 1.54X, 10X and 100X the reported atmospheric value of 70 dpm 85Kr per cubic centimeter of Kr gas at 25 degrees C (ie. 1.1X is 1.1 x 70, or 77 dpm 85Kr per cubic centimeter of Kr gas at 25 degrees C). A t-zero date and time of January 1, 2012 at 1200 Zulu was used for all standards. The Alternative Bench Standards (ABS) of 1.1X, 1.54X, 10X and 100X, are designated by titles of ABS-A, ABS-B, ABS C and ABS-D, respectively. The concentration of Kr in air is 1.14 ppm.

  6. Neuropathic pain therapy: from bench to bedside.

    PubMed

    Backonja, Miroslav Misha

    2012-07-01

    Neuropathic pain is a result of complex interactions between peripheral and central mechanisms with multiple potential therapeutic targets. However, the complexity of these mechanisms and relative youth of translational pain research, which is in its infancy, have prevented translation of successful basic bench research to human therapy. Most of the clinically available neuropathic pain treatments are borrowed from other therapeutic areas, such as antidepressants and antiepileptics, or involve application of older therapy, such as opioids. Exceptions are ziconotide, tapentadol, and the high-concentration capsaicin patch. Similar to all other analgesic agents, these provide only partial pain relief in subsets of patients. The standard of care for patients with chronic neuropathic pain is multimodal and multidisciplinary. For most patients to achieve and maintain satisfactory pain relief a combination of therapeutic agents is necessary, providing the empiric basis for rational polypharmacy, which has become a standard approach as well. PMID:23117951

  7. Bench-scale co-processing

    SciTech Connect

    Piasecki, C.A.; Gatsis, J.G.

    1992-02-19

    The objective of this contract is to extend and optimize UOP's single-stage, slurry-catalyzed co-processing scheme. The particular emphasis is one evaluating alternative and disposable slurry-catalyst systems. During the current quarter, Lloydminster vacuum resid was processed without the presence of coal. The objective of this study was to evaluate the manner in which the resid is upgraded at high-severity conditions to help understand the function of the resid during co-processing. This report coves Bench-Scale Runs 30 to 34. In Runs 30 to 34, Lloydminster vacuum resid was processed without the presence of coal using a 0.05 wt % molybdenum-based catalyst at 465{degrees}C.

  8. Malignant pleural effusion: from bench to bedside.

    PubMed

    Psallidas, Ioannis; Kalomenidis, Ioannis; Porcel, Jose M; Robinson, Bruce W; Stathopoulos, Georgios T

    2016-06-01

    Malignant pleural effusion (MPE) is a common but serious condition that is related with poor quality of life, morbidity and mortality. Its incidence and associated healthcare costs are rising and its management remains palliative, with median survival ranging from 3 to 12 months. During the last decade there has been significant progress in unravelling the pathophysiology of MPE, as well as its diagnostics, imaging, and management. Nowadays, formerly bed-ridden patients are genotyped, phenotyped, and treated on an ambulatory basis. This article attempts to provide a comprehensive overview of current advances in MPE from bench to bedside. In addition, it highlights unanswered questions in current clinical practice and suggests future directions for basic and clinical research in the field. PMID:27246596

  9. Imaging Neuroinflammation – from Bench to Bedside

    PubMed Central

    Pulli, Benjamin; Chen, John W

    2014-01-01

    Neuroinflammation plays a central role in a variety of neurological diseases, including stroke, multiple sclerosis, Alzheimer’s disease, and malignant CNS neoplasms, among many other. Different cell types and molecular mediators participate in a cascade of events in the brain that is ultimately aimed at control, regeneration and repair, but leads to damage of brain tissue under pathological conditions. Non-invasive molecular imaging of key players in the inflammation cascade holds promise for identification and quantification of the disease process before it is too late for effective therapeutic intervention. In this review, we focus on molecular imaging techniques that target inflammatory cells and molecules that are of interest in neuroinflammation, especially those with high translational potential. Over the past decade, a plethora of molecular imaging agents have been developed and tested in animal models of (neuro)inflammation, and a few have been translated from bench to bedside. The most promising imaging techniques to visualize neuroinflammation include MRI, positron emission tomography (PET), single photon emission computed tomography (SPECT), and optical imaging methods. These techniques enable us to image adhesion molecules to visualize endothelial cell activation, assess leukocyte functions such as oxidative stress, granule release, and phagocytosis, and label a variety of inflammatory cells for cell tracking experiments. In addition, several cell types and their activation can be specifically targeted in vivo, and consequences of neuroinflammation such as neuronal death and demyelination can be quantified. As we continue to make progress in utilizing molecular imaging technology to study and understand neuroinflammation, increasing efforts and investment should be made to bring more of these novel imaging agents from the “bench to bedside.” PMID:25525560

  10. Foaming phenomenon in bench-scale anaerobic digesters.

    PubMed

    Siebels, Amanda M; Long, Sharon C

    2013-04-01

    The Madison Metropolitan Sewerage District (The District) in Madison, Wisconsin has been experiencing seasonal foaming in their anaerobic biosolids digesters, which has occurred from mid-November to late June for the past few years. The exact cause(s) of foaming is unknown. Previous research findings are unclear as to whether applications of advanced anaerobic digestion processes reduce the foaming potential of digesters. The object of this study was to investigate how configurations of thermophilic and acid phase-thermophilic anaerobic digestion would affect foaming at the bench-scale level compared to single stage mesophilic digestion for The District. Bench-scale anaerobic digesters were fed with a 4 to 4.5% by dry weight of solids content blend of waste activated sludge (WAS) and primary sludge from The District. Foaming potential was monitored using Alka-Seltzer and aeration foaming tests. The bench-scale acid phase-thermophilic digester had a higher foaming potential than the bench-scale mesophilic digester. These results indicate that higher temperatures increase the foaming potential of the bench-scale anaerobic digesters. The bench-scale acid phase-thermophilic digesters had a greater percent (approximately 5 to 10%) volatile solids destruction and a greater percent (approximately 5 to 10%) total solids destruction when compared to the bench-scale mesophilic digester. Overall, for the full-scale foaming experienced by The District, it appears that adding an acid phase or switching to thermophilic digestion would not alleviate The District's foaming issues. PMID:23697241

  11. Development of a bench scale biomass torrefier

    NASA Astrophysics Data System (ADS)

    Mohd Ja'afar, M. N.; Abd Rahman, A.; Shamsuddin, A. H.

    2013-06-01

    Cofiring biomass with coal has become very popular with power utilities to reduce fossil fuel carbon dioxide (CO2) emission. It is relatively easy to implement on most common pulverised coal plants. However, raw biomass is difficult to utilise and requires upgrading to a higher quality fuel to substitute coal. Upgrading by torrefaction can improve the properties of biomass close to low rank coals suitable for cofiring. In this study, a bench scale torrefier was developed to produce torrefied biomass samples for further studies of its properties and combustion behaviour. The torrefier was developed from a domestic 1600W electric oven. Biomass pellets was then torrefied at 250 °C for 1 hour using this torrefier. Proximate analysis and gross calorific value (GCV) of the torrefied biomass were carried out. The results showed that GCV of the torrefied biomass had increased when compared to raw. The moisture content and volatile matter had decreased, and ash content and fixed carbon had increased as expected.

  12. Optical bench elements (petals) for IXO

    NASA Astrophysics Data System (ADS)

    Kampf, Dirk; Erhard, Markus; Bavdaz, Marcos; Wallace, Kotska; Gondoin, Philippe; Collon, Maximilien J.

    2009-08-01

    X-rays at various energies can be focussed with reflective optics at grazing incidence with a well-known reflectivity achieving a high effective area by means of various designs. On XMM the high collecting area was achieved by means of thin mirror shells which were made by nickel replication combining the parabola and hyperbola sections according to the WOLTER I design in a single element. 58 of these "elements" were combined to build a mirror assembly with an effective area of 1450 cm2 @1.5 keV per mirror assembly. In order to achieve a higher effective area for IXO the density needs to be reduced. This could be achieved by pore optics elements integrated into a set of 8 petals made of Cesic as an optical bench. This design is fitting into the fairing of Ariane with a diameter of 4.2 m and achieves an effective area of 3.36 m2. It will withstand the high launch loads of up to 60 g and provide a negligible degradation to the optical performance due to thermal loads and gravitational relaxation. The design, including the interfaces to the telescope and to the pore optics, will be presented.

  13. Keep Up the Good (Bench) Work!

    PubMed

    Moreno, S N J

    2016-08-01

    Professor Silvia Moreno studies toxoplasmosis, one of the most common parasitic infections in the world, caused by Toxoplasma gondii. About one-third of the human population is chronically infected with T. gondii cysts, the dormant form of the parasite. Although most immunocompetent infected individuals remain asymptomatic throughout life, serious complications such as loss of vision, mother-to-fetus transmission, and fatal cases can occur. The drugs currently available to treat toxoplasmosis are unable to clear the cyst form of the parasite and have severe side effects like bone marrow suppression and liver toxicity. Silvia has studied parasite metabolism for more than 20 years and has been at the University of Georgia since 2005. Her goal is to uncover unique aspects of parasite metabolism that can be targeted for designing more effective, less toxic drugs against T. gondii. In this short interview, Silvia highlights the importance of staying true to one's identity and of learning to say 'no', and advises young researchers to not stay away from the bench. PMID:27133187

  14. Apollo 13 Facts: Press Conference

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Flight Director Gene Krantz gives an overview of the Apollo 13 mission as corrections are made in the power down checklist, passive thermal control, and orbital burns after the spacecraft runs into problems. He then answers questions from the press with the help of Tony England, Bill Peters, and Dick Thorson. Footage then shows newspaper headlines 'We're Not Concerned' and 'Getting Ready to Land' as people watch televisions to see if the astronauts landed safely. The press conference section of this video has sound, the headlines section does not.

  15. 125. BENCH SHOP, LOOKING SOUTHEAST AT CENTER OF ROOM SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    125. BENCH SHOP, LOOKING SOUTHEAST AT CENTER OF ROOM SHOWING TOOL SHARPENER ON RIGHT AND ELECTRIC TABLE SAW AT CENTER. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  16. 118. BENCH SHOP, NORTHWEST CORNER SHOWING ENTRANCE TO ROOM FROM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    118. BENCH SHOP, NORTHWEST CORNER SHOWING ENTRANCE TO ROOM FROM OUTSIDE. OFFICE SAFE AT CENTER. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  17. 107. BASEMENT, DRIVE SHAFT THAT RUNS JOINTER IN BENCH SHOP. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    107. BASEMENT, DRIVE SHAFT THAT RUNS JOINTER IN BENCH SHOP. BELT ON RIGHT CONNECTS TO MAIN DRIVE SHAFT. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  18. Room 113, chemistry laboratory with benches perpendicular to the long ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Room 113, chemistry laboratory with benches perpendicular to the long axis of the room. A view to the southwest. - San Bernardino Valley College, Life Science Building, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  19. 13. Interior view of individual work benches along west wall ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Interior view of individual work benches along west wall of north 1922 section of Building 59. Camera pointed NW. - Puget Sound Naval Shipyard, Pattern Shop, Farragut Avenue, Bremerton, Kitsap County, WA

  20. Detail of a storage and work bench on the north ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of a storage and work bench on the north wall at the east end of Motor Room - Wellton-Mohawk Irrigation System, Pumping Plant No. 1, Bounded by Gila River & Union Pacific Railroad, Wellton, Yuma County, AZ

  1. Room 106, A laboratory with longitudinal arrangement of benches. View ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Room 106, A laboratory with longitudinal arrangement of benches. View to west. - San Bernardino Valley College, Life Science Building, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  2. Bench seating in northwest corner of the building Fitzsimons ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Bench seating in northwest corner of the building - Fitzsimons General Hospital, Golf Course Waiting Shelter, Southwest area of Golf Course, 700 feet Northeast of intersection of West Harlow Avenue & Peoria Street, Aurora, Adams County, CO

  3. 24. July 1974. BENCH SHOP, VIEW OF THE SOUTHEAST CORNER. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. July 1974. BENCH SHOP, VIEW OF THE SOUTHEAST CORNER. NOTE VARIOUS METHODS OF STORING TOOLS AND THE ELECTRICAL SYSTEM. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  4. 7. INTERIOR VIEW, PATTERN MAKING WORK BENCH AREA WEST WALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. INTERIOR VIEW, PATTERN MAKING WORK BENCH AREA WEST WALL LOOKING WEST LATHE ON LEFT DELTA BAND SAW LEFT, DELTA 6' JOINTS AND DELTA TABLE SAW ON RIGHT. - Knight Foundry, 13 Eureka Street, Sutter Creek, Amador County, CA

  5. 13. SOUTHEAST TO SUCKER ROD WORK BENCH AND WOODEN SUCKER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. SOUTHEAST TO SUCKER ROD WORK BENCH AND WOODEN SUCKER ROD STORAGE RACKS ALONG EAST WALL OF FACTORY INTERIOR. AT THIS BENCH WORKERS RIVETED THREADED WROUGHT IRON CONNECTORS TO THE ENDS OF 20' LONG WOODEN SUCKER RODS (THE RODS WHICH EXTEND DOWNWARD IN THE WELL FROM THE GROUND SURFACE TO PISTON DISPLACEMENT PUMPS WHICH ACTUALLY ELEVATE WATER TO THE SURFACE). ROZNOR HEATER AT THE FAR RIGHT WAS ADDED CIRCA 1960. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

  6. 40 CFR Appendix Viii to Part 86 - Aging Bench Equipment and Procedures

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Aging Bench Equipment and Procedures.... VIII Appendix VIII to Part 86—Aging Bench Equipment and Procedures This appendix provides specifications for standard aging bench equipment and aging procedures which may be used to conduct bench...

  7. 40 CFR Appendix Viii to Part 86 - Aging Bench Equipment and Procedures

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Aging Bench Equipment and Procedures.... 86, App. VIII Appendix VIII to Part 86—Aging Bench Equipment and Procedures This appendix provides specifications for standard aging bench equipment and aging procedures which may be used to conduct bench...

  8. 40 CFR Appendix Viii to Part 86 - Aging Bench Equipment and Procedures

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Aging Bench Equipment and Procedures.... 86, App. VIII Appendix VIII to Part 86—Aging Bench Equipment and Procedures This appendix provides specifications for standard aging bench equipment and aging procedures which may be used to conduct bench...

  9. 40 CFR Appendix Viii to Part 86 - Aging Bench Equipment and Procedures

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Aging Bench Equipment and Procedures.... 86, App. VIII Appendix VIII to Part 86—Aging Bench Equipment and Procedures This appendix provides specifications for standard aging bench equipment and aging procedures which may be used to conduct bench...

  10. 40 CFR Appendix Viii to Part 86 - Aging Bench Equipment and Procedures

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Aging Bench Equipment and Procedures.... 86, App. VIII Appendix VIII to Part 86—Aging Bench Equipment and Procedures This appendix provides specifications for standard aging bench equipment and aging procedures which may be used to conduct bench...

  11. Modeling and simulation research on automobile ABS bench detection

    NASA Astrophysics Data System (ADS)

    Hao, Ruru; Zhao, Xiangmo; Hao, Dingkun; Zhou, Zhou

    2014-10-01

    Modeling and simulation research on automobile ABS bench detection is conducted in this paper. First, the vehicle model, wheel model, braking force model, and tire-road model on the bench are established according to the ABS bench detection scheme. Then, the Matlab/Simulink simulation model of a single wheel vehicle is built through combining the sub-models described above. Finally, simulation experiments on a variety of simulated road conditions are carried out. And the comparative analysis between the ABS bench detection and ABS road experiments is accomplished. The contrast results show that the simulation curves of bench detection and those of road experiment have high similarity, which verified the correctness and feasibility of the proposed bench detection scheme. At the request of the authors this article is being retracted. It was inadvertently published in AIP Conf. Proc. 1618: The authors intended to publish a different article, but the wrong one was submitted for publication. The article is retracted from the scientific record with effect from 8 July 2015.

  12. Gifted Education Press Quarterly, 1995.

    ERIC Educational Resources Information Center

    Fisher, Maurice D., Ed.

    1995-01-01

    This document consists of the four issues of the newsletter "Gifted Education Press Quarterly" published during 1995. This newsletter addresses issues in the education of gifted children and youth. The major articles are: (1) "Using Today's Technology: Parents Can Help Challenge Gifted Children" (Adrienne O'Neill); (2) "Outcomes-Based Education…

  13. Law and the Student Press.

    ERIC Educational Resources Information Center

    Stevens, George E.; Webster, John B.

    Court cases and legal decisions involving the student press in the late 1960s and early 1970s are brought together in this book in order to show how the law has been applied to school officials and student journalists in high school, college, and the underground. The ten chapters cover the following topics: censorship, libel, obscenity, contempt,…

  14. NATIONAL ACADEMY PRESS WEB SITE

    EPA Science Inventory

    The National Academy Press is the publisher for the National Academy of Sciences, the National Academy of Engineering, the Institute of Medicine, and the National Research Council. Through this web site, you have access to a virtual treasure trove of books, reports and publicatio...

  15. 30th Arniversary Press Conference

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Marking the occasion of the Apollo 11 30th Anniversary, members of the Apollo and Saturn astronaut programs attended festivities at Marshall Space Flight Center in Huntsville, AL. A press conference was held at the U. S. Space and Rocket Center for the visiting astronauts. Pictured are (L/R): Edgar Mitchell, Walt Cunningham, Charlie Duke, Buzz Aldrin, Dick Gordon and Owen Garriott.

  16. Peritoneal dialysis: from bench to bedside

    PubMed Central

    Krediet, Raymond T.

    2013-01-01

    Peritoneal dialysis was first employed in patients with acute renal failure in the 1940s and since the 1960s for those with end-stage renal disease. Its popularity increased enormously after the introduction of continuous ambulatory peritoneal dialysis in the end of 1970s. This stimulated both clinical and basic research. In an ideal situation, this should lead to cross-fertilization between the two. The present review describes two examples of interactions: one where it worked out very well and another where basic science missed the link with clinical findings. Those on fluid transport are examples of how old physiological findings on absorption of saline and glucose solutions were adopted in peritoneal dialysis by the use of glucose as an osmotic agent. The mechanism behind this in patients was first solved mathematically by the assumption of ultrasmall intracellular pores allowing water transport only. At the same time, basic science discovered the water channel aquaporin-1 (AQP-1), and a few years later, studies in transgenic mice confirmed that AQP-1 was the ultrasmall pore. In clinical medicine, this led to its assessment in patients and the notion of its impairment. Drugs for treatment have been developed. Research on biocompatibility is not a success story. Basic science has focussed on dialysis solutions with a low pH and lactate, and effects of glucose degradation products, although the first is irrelevant in patients and effects of continuous exposure to high glucose concentrations were largely neglected. Industry believed the bench more than the bedside, resulting in ‘biocompatible’ dialysis solutions. These solutions have some beneficial effects, but are evidently not the final answer. PMID:26120456

  17. Bench-Scale Co-Processing

    SciTech Connect

    Piasecki, C.A.; Gatsis, J.G.; Fullerton, H.E.

    1993-11-08

    This topical report is the first for the UOP Bench-Scale Co-processing contract. The objective of this contract is to extend and optimize the UOP single-stage, slurry-catalyzed co-processing scheme. UOP co-processing uses a single-stage, slurry-catalyzed scheme in which petroleum vacuum resid and coal are simultaneously upgraded to a high-quality synthetic oil. A highly active, well-dispersed catalyst permits operations at moderate- and high-severity reaction conditions with minimum detrimental thermal reactions. In this process, finely ground coal, petroleum resid, and catalyst are mixed, combined with hydrogen, and then directed to a single-stage reactor, where the simultaneous upgrading of the petroleum resid and coal occurs. The reactor effluent is directed to a series of separators, where a hydrogen-rich gas is recovered and recycled back to the reactor inlet. The balance of the material is sent to a series of separators, where the light gasses, light oil, vacuum gas on (VGO), catalyst, unconverted coal, ash, and residues are recovered. The catalyst is recycled back to the reactor. The UOP co-processing scheme is designed to be integrated into a conventional petroleum refinery. the hydrocarbon products from the co-processing unit will be sent to the refinery for final upgrading to finished products. A major focus of this contract is to investigate ways to reduce the catalyst and catalyst recovery costs and improve the overall economics of the process. This report documents the work completed under Task 2.0, Laboratory Support. The overall objective of Task 2.0 was to obtain and characterize the feedstocks for the contract and to provide a screening mechanism to test new catalyst systems prior to testing in the continuous pilot plant. The main elements of the experimental program for task 2.0 include: Feedstock procurement and analysis; catalyst improvements; and catalyst recycle screening.

  18. Hot isostatic pressing of ceramics

    NASA Technical Reports Server (NTRS)

    Honma, K.

    1985-01-01

    A mixture containing glass 70 to 95 and BN or B4C powder (0.1-10 microns) 5 to 30 vol. % is used as a secondary pressure medium in hot isostatic pressing of ceramics. Thus, Pyrex beads were mixed with 15% vol. BN powder (average diameter 2 microns), fused at 1400 deg for 2 h, cooled, crushed, and put into a graphite crucible. A Si3N4 sintered body was embedded in the powder, heated in vacuum at 1200 deg for 2 h, treated in a hot isostatic press furnace at 1700 deg and 1000 atm. for 1 h, and cooled to give a Si3N4 ceramic. It was easily separated from the crucible.

  19. A Conversation with Frank Press

    NASA Astrophysics Data System (ADS)

    Goodstein, Judith R.

    Geophysicist Frank Press was director of Caltech's Seismological Laboratory from 1957 to 1965. In this interview, he recalls his work with Maurice Ewing at Columbia's Lamont Geological Observatory; his directorship of Caltech's Seismological Laboratory and colleagues Charles Richter, Beno Gutenberg, and Hugo Benioff; his work on the free oscillations of the earth; and his part in establishing the worldwide network of seismographs for the detection of nuclear weapons testing.

  20. Radial Electromagnetic Press for IGNITOR

    NASA Astrophysics Data System (ADS)

    Cucchiaro, A.; Anzidei, L.; Capriccioli, A.; Celentano, G.; Crescenzi, C.; Gasparotto, M.; Guerrieri, A.; Pizzuto, A.; Palmieri, A.; Rita, C.; Roccella, M.; Coppi, B.

    1998-11-01

    The structural performance of the IGNITOR machine relies upon a combination of both bucking between Toroidal Field Coils (TFCs), Central Solenoid (CS) and the Central Post (CP), and wedging in a well-defined area of the TFCs and of the magnet mechanical structure (called C-Clamps). This requires a pre-loading system to enhance the load bearing capability. Several solutions have been assessed and compared with each other within the operational scenarios and eventually a radial electromagnetic press has been selected as reference(Pizzuto A. et al., ENEA Report IGN/MAC/001/96). The loading system is made up by active coils and passive restraining rings. The radial active press consists of two pairs of coils (200x200mm each), symmetrically located relative to the machine equatorial plane and seating onto the passive rings. The permanent pre--load of the rings is applied through a wedging system with a load of about 120 MN. A radial electromagnetic press has the purpose of modulating the axial pressure on the TFC inner legs during the pulse. Design aspects including stress analysis, manufacturing, assembly and operational scenarios of the selected solution are presented in this paper.

  1. The Small Book Press: A Cultural Essential.

    ERIC Educational Resources Information Center

    Henderson, Bill

    1984-01-01

    Discussion of small literary book publishers notes works of small-press authors (Thomas Paine, Washington Irving, Walt Whitman, Mark Twain, Upton Sinclair, Anais Nin); today's outstanding presses (Creative Arts Book Company, Persea Books, Full Court Press, Reed and Cannon Company, Tuumba Books); and role of little magazines. Thirty-seven…

  2. Yale University Press: Disseminating "Lux et Veritas"?

    ERIC Educational Resources Information Center

    Parrott, John B.

    2010-01-01

    America's university presses are situated within a network of over one hundred universities, learned societies, and scholarly associations. According to a pamphlet put out by the American Association of University Presses, these presses "make available to the broader public the full range and value of research generated by university faculty."…

  3. The Burger Court and the Press.

    ERIC Educational Resources Information Center

    Higdon, Philip R.

    This report discusses recent cases involving freedom of the press that have been heard before the Burger court of the United States Supreme Court. The report discerns a trend toward treating the press like an ordinary citizen; this is a reversal of the view of the Warren court that the First Amendment creates special rights for the press so that…

  4. Bench-scale screening tests for a boiling sodium-potassium alloy solar receiver

    NASA Astrophysics Data System (ADS)

    Moreno, J. B.; Moss, T. A.

    1993-06-01

    Bench-scale tests were carried out in support of the design of a second-generation 75-kW(sub t) reflux pool-boiler solar receiver. The receiver will be made from Haynes Alloy 230 and will contain the sodium-potassium alloy NaK-78. The bench-scale tests used quartz lamp heated boilers to screen candidate boiling stabilization materials and methods at temperatures up to 750 degree C. Candidates that provided stable boiling were tested for hot-restart behavior. Poor stability was obtained with single 1/4-inch diameter patches of powdered metal hot press sintered onto the wetted side of the heat-input area. Laser-drilled and electric discharge machined cavities in the heated surface also performed poorly. Small additions of xenon, and heated-surface tilt out of the vertical, dramatically improved poor boiling stability; additions of helium or oxygen did not. The most stable boiling was obtained when the entire heat-input area was covered by a powdered-metal coating. The effect of heated-area size was assessed for one coating: at low incident fluxes, when even this coating performed poorly, increasing the heated-area size markedly improved boiling stability. Good hot-restart behavior was not observed with any candidate, although results were significantly better with added xenon in a boiler shortened from 3 to 2 feet. In addition to the screening tests, flash-radiography imaging of metal-vapor bubbles during boiling was attempted. Contrary to the Cole-Rohsenow correlation, these bubble-size estimates did not vary with pressure; instead they were constant, consistent with the only other alkali metal measurements, but about 1/2 their size.

  5. Bench-scale screening tests for a boiling sodium-potassium alloy solar receiver

    SciTech Connect

    Moreno, J.B.; Moss, T.A.

    1993-06-01

    Bench-scale tests were carried out in support of the design of a second-generation 75-kW{sub t} reflux pool-boiler solar receiver. The receiver will be made from Haynes Alloy 230 and will contain the sodium-potassium alloy NaK-78. The bench-scale tests used quartz-lamp-heated boilers to screen candidate boiling-stabilization materials and methods at temperatures up to 750{degree}C. Candidates that provided stable boiling were tested for hot-restart behavior. Poor stability was obtained with single 1/4-inch diameter patches of powdered metal hot-press-sintered onto the wetted side of the heat-input area. Laser-drilled and electric-discharge-machined cavities in the heated surface also performed poorly. Small additions of xenon, and heated-surface tilt out of the vertical dramatically improved poor boiling stability; additions of helium or oxygen did not. The most stable boiling was obtained when the entire heat-input area was covered by a powdered-metal coating. The effect of heated-area size was assessed for one coating: at low incident fluxes, when even this coating performed poorly, increasing the heated-area size markedly improved boiling stability. Good hot-restart behavior was not observed with any candidate, although results were significantly better with added xenon in a boiler shortened from 3 to 2 feet. In addition to the screening tests, flash-radiography imaging of metal-vapor bubbles during boiling was attempted. Contrary to the Cole-Rohsenow correlation, these bubble-size estimates did not vary with pressure; instead they were constant, consistent with the only other alkali metal measurements, but about 1/2 their size.

  6. Object oriented hardware-software test bench for OMTF diagnosis

    NASA Astrophysics Data System (ADS)

    Drabik, Pawel; Pozniak, Krzysztof T.; Bunkowski, Karol; Zawistowski, Krystian; Byszuk, Adrian; Bluj, Michał; Doroba, Krzysztof; Górski, Maciej; Kalinowski, Artur; Kierzkowski, Krzysztof; Konecki, Marcin; Królikowski, Jan; Oklinski, Wojciech; Olszewski, Michał; Skala, Aleksander; Zabołotny, Wojciech M.

    2015-09-01

    In this paper the object oriented hardware-software model and its sample implementation of diagnostics for the Overlap Muon Track Finder trigger for the CMS experiment in CERN is described. It presents realization of test-bench for control and diagnosis class of multichannel, distributed measurement systems based on FPGA chips. The test-bench fulfills requirements for system's rapid changes, configurability and efficiency. This ability is very significant and desirable by expanded electronic systems. The solution described is a software model based on a method of address space management called the Component Internal Interface (CII). Establishment of stable link between hardware and software, as a purpose of designed and realized programming environment, is presented. The test-bench implementation and example of OMTF algorithm test is presented.

  7. Lab results from the GREGOR MCAO test bench

    NASA Astrophysics Data System (ADS)

    Schmidt, Dirk; Berkefeld, Thomas; Heidecke, Frank

    2013-12-01

    We present the performance of the GREGOR MCAO system. This MCAO system, which actually is a tripple-conjugate adaptive optics, was set up in a laboratory test bench. GREGOR is the new German 1.5-meter solar telescope, and it is currently equipped with a 256-actuators classical adaptive optics system. On-sky tests of the MCAO system are planned for this observing season. A cooktop plate was used to generate turbulence in the test bench. We present measurements of residual agile image distortion, and of wavefront errors in the 19 guide directions.

  8. Virtual bench testing to study coronary bifurcation stenting.

    PubMed

    Migliavacca, Francesco; Chiastra, Claudio; Chatzizisis, Yiannis S; Dubini, Gabriele

    2015-01-01

    Virtual bench testing is a numerical methodology which has been applied to the study of coronary interventions. It exploits the amazing growth of computer performance for scientific calculation and makes it possible to simulate very different and complex multiphysics environments and processes, including coronary bifurcation stenting. The quality of prediction from any computer model is very sensitive to the quality of the input data and assumptions. This also holds true in stent virtual bench testing. This paper reviews the state of the art in the field of bifurcation stenting modelling and identifies the current advantages and limitations of this methodology. PMID:25983167

  9. Orbit attitude processor. STS-1 bench program verification test plan

    NASA Technical Reports Server (NTRS)

    Mcclain, C. R.

    1980-01-01

    A plan for the static verification of the STS-1 ATT PROC ORBIT software requirements is presented. The orbit version of the SAPIENS bench program is used to generate the verification data. A brief discussion of the simulation software and flight software modules is presented along with a description of the test cases.

  10. 50. BELTDRIVEN LATHE AND WORK BENCH, SHOWING TOOL STORAGE BOARD ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. BELT-DRIVEN LATHE AND WORK BENCH, SHOWING TOOL STORAGE BOARD BEHIND. EEC print no. N-C-01-00043, no date. Photograph by Benjamin F. Pearson. - Santa Ana River Hydroelectric System, SAR-1 Powerhouse, Redlands, San Bernardino County, CA

  11. 26. July 1974. BENCH SHOP, VIEW LOOKING SOUTH, SHOWING THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. July 1974. BENCH SHOP, VIEW LOOKING SOUTH, SHOWING THE BORING MACHINE PURCHASED IN 1885. THE BIT MAY BE LOWERED BY THE HANGING LINKAGE OR THE TABLE RAISED BY THE FOOT PEDAL. NOTICE THE CHASE FOR THE BELTS, BUILT NO LESS CAREFULLY THAN THE MACHINE ITSELF. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  12. 40 CFR 86.320-79 - Analyzer bench check.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Analyzer bench check. 86.320-79 Section 86.320-79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for New Gasoline-Fueled and Diesel-Fueled...

  13. 40 CFR 91.323 - Analyzer bench checks.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Analyzer bench checks. 91.323 Section 91.323 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... NO converter is used, condition all new or replacement converters. The conditioning consists...

  14. 33. BENCH CORE STATION, GREY IRON FOUNDRY CORE ROOM WHERE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. BENCH CORE STATION, GREY IRON FOUNDRY CORE ROOM WHERE CORE MOLDS WERE HAND FILLED AND OFTEN PNEUMATICALLY COMPRESSED WITH A HAND-HELD RAMMER BEFORE THEY WERE BAKED. - Stockham Pipe & Fittings Company, Grey Iron Foundry, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  15. Bench vise adapter grips tubing securely and safely

    NASA Technical Reports Server (NTRS)

    Howland, B. T.; Jones, A. S., Jr.

    1966-01-01

    Plastic self-compressing adapter with grooves, attached to the jaws of a bench vise, secures thin-wall tubing vertically or horizontally during cutting and flaring operations without marring or damaging it. Magnets incorporated in both sections of the adapter prevent detachment from the jaws when the vise is opened.

  16. Optimising Microbial Growth with a Bench-Top Bioreactor

    ERIC Educational Resources Information Center

    Baker, A. M. R.; Borin, S. L.; Chooi, K. P.; Huang, S. S.; Newgas, A. J. S.; Sodagar, D.; Ziegler, C. A.; Chan, G. H. T.; Walsh, K. A. P.

    2006-01-01

    The effects of impeller size, agitation and aeration on the rate of yeast growth were investigated using bench-top bioreactors. This exercise, carried out over a six-month period, served as an effective demonstration of the importance of different operating parameters on cell growth and provided a means of determining the optimisation conditions…

  17. 40 CFR 91.323 - Analyzer bench checks.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Analyzer bench checks. 91.323 Section 91.323 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Emission Test Equipment Provisions §...

  18. Design and Control Implementation of AC Electric Power Steering System Test Bench*

    NASA Astrophysics Data System (ADS)

    Zhang, Weidong; Ai, Yibo

    Using AC motor is an important development trend of electric power steering system, and in this paper, we proposed a design of AC electric power steering system test bench. The paper introduced the bench structure, working principle and main components selection first, and then given the implementation scheme of test bench's three functions: simulation of the road resistance, power assistant control and data acquisition. The test results showed the feasibility of the test bench.

  19. Cold press sintering of simulated lunar basalt

    NASA Technical Reports Server (NTRS)

    Altemir, D. A.

    1993-01-01

    In order to predict the conditions for which the lunar regolith may be adequately sintered, experiments were conducted in which samples of simulated lunar basalt (MLS-1) were pressed at high pressures and then heated in an electric furnace. This sintering process may be referred to as cold press sintering since the material is pressed at room temperature. Although test articles were produced which possessed compressive strengths comparable to that of terrestrial concrete, the cold press sintering process requires very high press pressures and sintering temperatures in order to achieve that strength. Additionally, the prospect of poor internal heat transfer adversely affecting the quality of sintered lunar material is a major concern. Therefore, it is concluded that cold press sintering will most likely be undesirable for the production of lunar construction materials.

  20. Slurry-pressing consolidation of silicon nitride

    NASA Technical Reports Server (NTRS)

    Sanders, William A.; Kiser, James D.; Freedman, Marc R.

    1989-01-01

    A baseline slurry-pressing method for a silicon nitride material is developed. The Si3N4 composition contained 5.8 wt percent SiO2 and 6.4 wt percent Y2O3. Slurry-pressing variables included volume percent solids, application of ultrasonic energy, and pH. Twenty vol percent slurry-pressed material was approximately 11 percent stronger than both 30 vol percent slurry-pressed and dry-pressed materials. The Student's t-test showed the difference to be significant at the 99 percent confidence level. Twenty volume percent (300 h) slurry-pressed test bars exhibited strengths as high as 980 MPa. Large, columnar beta-Si3N4 grains caused failure in the highest strength specimens. The improved strength correlated with better structural uniformity as determined by radiography, optical microscopy, and image analysis.

  1. Slurry-pressing consolidation of silicon nitride

    NASA Technical Reports Server (NTRS)

    Sanders, William A.; Kiser, James D.; Freedman, Marc R.

    1988-01-01

    A baseline slurry-pressing method for a silicon nitride material is developed. The Si3N4 composition contained 5.8 wt percent SiO2 and 6.4 wt percent Y2O3. Slurry-pressing variables included volume percent solids, application of ultrasonic energy, and pH. Twenty vol percent slurry-pressed material was approximately 11 percent stronger than both 30 vol percent slurry-pressed and dry-pressed materials. The Student's t-test showed the difference to be significant at the 99 percent confidence level. Twenty volume percent (300 h) slurry-pressed test bars exhibited strengths as high as 980 MPa. Large, columnar beta-Si3N4 grains caused failure in the highest strength specimens. The improved strength correlated with better structural uniformity as determined by radiography, optical microscopy, and image analysis.

  2. NASA/MSFC Large Stretch Press Study

    NASA Technical Reports Server (NTRS)

    Choate, M. W.; Nealson, W. P.; Jay, G. C.; Buss, W. D.

    1985-01-01

    The purpose of this study was to: A. assess and document the advantages/disadvantages of a government agency investment in a large stretch form press on the order of 5000 tons capacity (per jaw); B. develop a procurement specification for the press; and C. provide trade study data that will permit an optimum site location. Tasks were separated into four major elements: cost study, user survey, site selection, and press design/procurement specification.

  3. [The press and family planning].

    PubMed

    Abraham De D'ornellas, R

    1987-01-01

    The treatment in the press of family planning hinges on two fundamental factors: the taboo of the leftist groups and the taboo of the Catholic Church, whose head is against abortion under any circumstances. Leftist views insinuate that family planning is the genocidal plan of North American imperialists against the Third World and, in particular, against Latin America. This genocidal plan is supposed to subject poor populations to international schemes. In the press family planning is often treated in a sanctimonious fashion, lumping it together with topics like pornography, sex, and violence. In 1983 the daily newspaper Expreso published a supplement running every week for almost three months about the issue of population, which dealt fairly extensively with such topics as population and housing, education, employment, and urban proliferation, as well as responsible parenthood and child survival. In addition, there was a detailed description of contraceptive methods. In October 1986 another surprising thing happened: the President of Peru talked about the topic of family planning, which at the time was an act of courage. Since then much has changed; the whole world is interested in family planning and certain aspects of population. Since October 1986 more has been published in this domain than during the preceding 20 years. In contrast, the Church reacted differently to this issue: after some initial caution, the conference of Peruvian bishops attacked all methods of modern contraceptives and private institutions of family planning. The information boom in family planning will certainly continue. At the moment this flood of articles and editorials about the issue is an expression of the anxiety of families related to uncontrolled reproduction and the fear of overpopulation in large cities devoid of minimal services. PMID:12281466

  4. The Press vs. Professional Wrestling: How the Press Covered WrestleMania III.

    ERIC Educational Resources Information Center

    Ortizano, Giacomo L.

    This paper analyzes the relationship between the press and professional wrestling. It examines professional wrestling as a business and the conflicting goals of the promoters and the press. The paper focuses on how the press covered the most widely viewed professional wrestling show of all time, WrestleMania III (looking at newspaper coverage…

  5. Modified Daily Undulating Periodization Model Produces Greater Performance Than a Traditional Configuration in Powerlifters.

    PubMed

    Zourdos, Michael C; Jo, Edward; Khamoui, Andy V; Lee, Sang-Rok; Park, Bong-Sup; Ormsbee, Michael J; Panton, Lynn B; Contreras, Robert J; Kim, Jeong-Su

    2016-03-01

    The primary aim of this study was to compare 2 daily undulating periodization (DUP) models on one-repetition maximum (1RM) strength in the squat, bench press, deadlift, total volume (TV) lifted, and temporal hormone response. Eighteen male, college-aged (21.1 ± 1.9 years) powerlifters participated in this study and were assigned to one of 2 groups: (a) traditional DUP training with a weekly training order: hypertrophy-specific, strength-specific, and power-specific training (HSP, n = 9) or (b) modified DUP training with a weekly training order: hypertrophy-specific, power-specific, and strength-specific training (HPS, n = 9). Both groups trained 3 nonconsecutive days per week for 6 weeks and performed the squat, bench press, and deadlift exercises. During hypertrophy and power sessions, subjects performed a fixed number of sets and repetitions but performed repetitions until failure at a given percentage during strength sessions to compare TV. Testosterone and cortisol were measured at pretesting and posttesting and before each strength-specific day. Hypertrophy, power, and strength produced greater TV in squat and bench press (p ≤ 0.05) than HSP, but not for deadlift (p > 0.05). For squat and deadlift, there was no difference between groups for 1RM (p > 0.05); however, HPS exhibited greater increases in 1RM bench press than HSP (p ≤ 0.05). Effect sizes (ES) showed meaningful differences (ES > 0.50) in favor of HPS for squat and bench press 1RM. Testosterone decreased (p ≤ 0.05) at weeks 5 and 6 and cortisol decline at weeks 3 and 4. However, neither hormone was different at posttesting compared with pretesting (p > 0.05). Our findings suggest that an HPS configuration of DUP has enhanced performance benefits compared with HSP. PMID:26332783

  6. Teenagers as Victims in the Press

    ERIC Educational Resources Information Center

    Andersson, Gunvor; Lundstrom, Tommy

    2007-01-01

    Research into press reporting on young people has tended to concentrate on young people as offenders. In contrast, this article focuses on press coverage of teenagers as victims. Reports in two Swedish newspapers (a morning broadsheet and an evening tabloid) were studied over a period of four months and subjected to a qualitative analysis of…

  7. Special Section: University Presses and Libraries.

    ERIC Educational Resources Information Center

    Berry, John; And Others

    1986-01-01

    Describes issues discussed at the Association of American University Presses, June 1986 meeting, as being divided between those interested in using the techniques of commercial publishers and those committed to publishing what is worthy. Chandler Grannis describes "New Directions for University Presses" and Doug Armato "The Power of 'Serious'…

  8. The Lily-White University Presses.

    ERIC Educational Resources Information Center

    Shin, Annys

    1996-01-01

    Argues that the university presses are immune from racial change and discusses the problem of using location as an argument for not being able to lure blacks into university publishing. Howard University Press is used to illustrate the problem of budget cutting and the ability to boost black recruitment efforts or establish a united black press…

  9. The Mythology of the Penny Press.

    ERIC Educational Resources Information Center

    Nerone, John C.

    1987-01-01

    Examines common scholarly characterizations of the American penny press of the 1830s and 40s that together provide a myth of origins of the contemporary U.S. press. Criticizes inaccuracies and misleading elements in this mythology and its implications for subsequent debate about U.S. journalism. (JK)

  10. The Egyptian Press: An Official Fourth Estate.

    ERIC Educational Resources Information Center

    Lawhorne, Clifton O.

    A descriptive study based on Egyptian law, printed sources, and interviews clarifies our picture of the Egyptian Press by examining its status as a constitutionally mandated "Fourth Estate." The constitutional amendment, the resultant Egyptian Press Law, and the "Law Of Shame" (all passed in 1980), are designed to create a heavily controlled press…

  11. Freedom of the Press vs. Public Access.

    ERIC Educational Resources Information Center

    Schmidt, Benno C., Jr.

    This book surveys the implications of freedom of the press for a constitutionally rooted public right of access to electronic and print media. Part one provides general perspectives on access to the media, including discussions of access in relation to the Supreme Court, to First Amendment history and theory, to current perceptions of the press,…

  12. Fracture toughness of hot-pressed beryllium

    NASA Technical Reports Server (NTRS)

    Lemon, D. D.; Brown, W. F., Jr.

    1985-01-01

    This paper presents the results of an investigation into the fracture toughness, sustained-load flaw growth, and fatigue-crack propagation resistance of S200E hot-pressed beryllium at room temperature. It also reviews the literature pertaining to the influence of various factors on the fracture toughness of hot-pressed beryllium determined using fatigue-cracked specimens.

  13. The Pedagogical Press: Problems and Trends.

    ERIC Educational Resources Information Center

    Soviet Education, 1990

    1990-01-01

    Presents a discussion by journalists, scientists, and writers on educational problems in the Soviet Union. Focuses on the the role of the pedagogical press in restructuring public education in light of perestroika. Calls for press involvement in defining and developing public education. Lists questions for consideration and invites responses. (NL)

  14. Using Maximal Isometric Force to Determine the Optimal Load for Measuring Dynamic Muscle Power

    NASA Technical Reports Server (NTRS)

    Spiering, Barry A.; Lee, Stuart M. C.; Mulavara, Ajitkumar P.; Bentley, Jason R.; Nash, Roxanne E.; Sinka, Joseph; Bloomberg, Jacob J.

    2009-01-01

    Maximal power output occurs when subjects perform ballistic exercises using loads of 30-50% of one-repetition maximum (1-RM). However, performing 1-RM testing prior to power measurement requires considerable time, especially when testing involves multiple exercises. Maximal isometric force (MIF), which requires substantially less time to measure than 1-RM, might be an acceptable alternative for determining the optimal load for power testing. PURPOSE: To determine the optimal load based on MIF for maximizing dynamic power output during leg press and bench press exercises. METHODS: Twenty healthy volunteers (12 men and 8 women; mean +/- SD age: 31+/-6 y; body mass: 72 +/- 15 kg) performed isometric leg press and bench press movements, during which MIF was measured using force plates. Subsequently, subjects performed ballistic leg press and bench press exercises using loads corresponding to 20%, 30%, 40%, 50%, and 60% of MIF presented in randomized order. Maximal instantaneous power was calculated during the ballistic exercise tests using force plates and position transducers. Repeated-measures ANOVA and Fisher LSD post hoc tests were used to determine the load(s) that elicited maximal power output. RESULTS: For the leg press power test, six subjects were unable to be tested at 20% and 30% MIF because these loads were less than the lightest possible load (i.e., the weight of the unloaded leg press sled assembly [31.4 kg]). For the bench press power test, five subjects were unable to be tested at 20% MIF because these loads were less than the weight of the unloaded aluminum bar (i.e., 11.4 kg). Therefore, these loads were excluded from analysis. A trend (p = 0.07) for a main effect of load existed for the leg press exercise, indicating that the 40% MIF load tended to elicit greater power output than the 60% MIF load (effect size = 0.38). A significant (p . 0.05) main effect of load existed for the bench press exercise; post hoc analysis indicated that the effect of

  15. Bench to beside: motivation for university industry partnership.

    PubMed

    Thakor, Nitish V

    2009-01-01

    This paper discusses the motivation for entrepreneurship in academia and for forging a relationship between an academic laboratory and a startup. University based personnel, faculty and students, priorities basic bench research. On the other side, industry, particularly startups, prioritize technology development for clinical and commercial translation. The paper presents personal experience as a case study. University based researchers, faculty and students, might participate in and benefit from such an entrepreneurial activity. A University spin off would facilitate translational of bench research ideas and results to technologies for bedside use. Attention to issues such as conflict of interest and concern and ethics of working with human subjects need to be managed by the investigators and the institution. While entrepreneurial activity is not for everyone, it does provide the benefit and satisfaction to see research reach practice. PMID:19963705

  16. Bench Test of the Vibration Compensation Interferometer for EAST Tokamak

    NASA Astrophysics Data System (ADS)

    Li, Gongshun; Yang, Yao; Liu, Haiqing; Jie, Yinxian; Zou, Zhiyong; Wang, Zhengxing; Zeng, Long; Wei, Xuechao; Li, Weiming; Lan, Ting; Zhu, Xiang; Liu, Yukai; Gao, Xiang

    2016-02-01

    A visible laser-based vibration compensation interferometer has recently been designed for the EAST tokamak and the bench test has been finished. The system was optimized for its installation on EAST. The value of the final optical power before the detectors without plasma has been calculated from the component bench test result, which is quite close to the measured value. A nanometer level displacement (of the order of the laser's wavelength) has been clearly measured by a modulation of piezoelectric ceramic unit, proving the system's capability. supported by the National Magnetic Confinement Fusion Program of China (Nos. 2014GB106002, 2014GB106003, 2014GB106004) and National Natural Science Foundation of China (Nos. 11105184, 11375237, 11505238)

  17. Liquid Metal Thermal Electric Converter bench test module

    SciTech Connect

    Lukens, L.L.; Andraka, C.E.; Moreno, J.B.

    1988-04-01

    This report describes the design, fabrication, and test of a Liquid Metal Thermal Electric Converter Bench Test Module. The work presented in this document was conducted as a part of Heat Engine Task of the US Department of Energy's (DOE) Solar Thermal Technology Program. The objective of this task is the development and evaluation of heat engine technologies applicable to distributed receiver systems, in particular, dish electric systems.

  18. The Reluctant Reformation: On Criticizing the Press in America.

    ERIC Educational Resources Information Center

    Brown , Lee

    This book examines the status of the press and the criticism surrounding it. Chapter 1 attempts to relate theories of criticism to the contemporary press, to define the public interest relative to the press, and to discuss the role of criticism and the social responsibility of the press. Chapter 2 presents a brief history of press criticism from…

  19. Acute oxygen uptake and resistance exercise performance using different rest interval lengths: the influence of maximal aerobic capacity and exercise sequence.

    PubMed

    Ratamess, Nicholas A; Rosenberg, Joseph G; Kang, Jie; Sundberg, Samantha; Izer, Kerrie A; Levowsky, Jaclyn; Rzeszutko, Christina; Ross, Ryan E; Faigenbaum, Avery D

    2014-07-01

    The purpose of this study was to examine the relationship between VO2max and acute resistance exercise performance and the acute metabolic effects of exercise sequencing. Seventeen resistance-trained men were tested for VO2max and 1 repetition maximum (1RM) strength. Subjects were randomly assigned to either a group that performed the squat first in sequence followed by the bench press (S; n = 8) or a group that performed the bench press first followed by the squat (BP; n = 9). Each group performed 3 protocols (using 1-, 2-, or 3-minute rest intervals [RIs] between sets in random order) consisting of 5 sets of each exercise with 75% of their 1RM for up to 10 repetitions while oxygen consumption was measured. Total repetitions completed were highest with 3-minute RI and lowest with 1-minute RI. Mean VO2 was significantly highest with 1-minute RI and lowest using 3-minute RI. Analysis of each exercise revealed a tendency (p = 0.07) for mean bench press VO2 to be higher when it was performed after the squat using 1- and 2-minute RIs. VO2max was significantly negatively correlated to 1RM bench press and squat (r = -0.79 and -0.60, respectively) and was significantly correlated to squat repetitions (r = 0.43-0.57) but did not correlate to bench press performance. It seems that VO2max is related to lower-body resistance exercise performance when short RIs are used, and the metabolic response to the bench press is augmented when it follows the squat in sequence using short RIs. PMID:24714546

  20. Mechanical Properties from PBX 9501 Pressing Study

    NASA Astrophysics Data System (ADS)

    Graff Thompson, Darla; Wright, Walter J.

    2004-07-01

    A PBX 9501 pressing study was conducted by researchers in ESA-WMM, LANL, to identify the hydrostatic pressing parameters most important in fabricating high-density parts with uniform density. In this study, 31 charges were pressed using a full permutation of six pressing parameters. Five charges from the set of 31 were selected for an evaluation of their mechanical properties, specifically uniaxial compression and tension. Charges were selected to 1) span the density range of the study, and 2) allow two direct comparisons of pressing parameters independent of bulk density (density has a well-established affect on some material properties). Three PBX 9501 charges pressed isostatically at Pantex Plant in Amarillo, TX were also included in the study. The tensile properties of the 8 charges varied significantly. Careful evaluation of the results suggests that an increase in pressing temperature may correlate with an increase in tensile stress (strength) and a decrease in strain (ductility). Trends in compression exist but are less pronounced. In an effort to explore the relationship between pressing temperature and tensile strength, four sheets of Estane polymer (a component of the PBX 9501 binder) were compression molded at 70, 90, 110 and 130°C. The tensile strength of Estane was observed to increase by a factor of nearly 20 when the molding temperature was increased from 70 to 90°C (strength increase was negligible beyond 90°C). We present an outline of ongoing work that will irrefutably quantify the mechanical property affects of both pressing temperature and dwell time on PBX 9501.(LA-UR 03-4842).

  1. STS-8 onboard crew press conference

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Six news reporters listen to a response from Astronaut Guion S. Bluford (note TV monitor) in a rare space-to-Earth press conference involving all the STS-8 crew. The participants are, left to right, Gary Schwitzer, Cable News Network; Morton Dean, CBS; Roy Neal, NBC; Lynn Sherr, ABC; Howard Benedict, Associated Press; Al Rossiter, United Press International. The astronauts on the monitor are Richard H. Truly, cneter left, crew commander; Daniel C. Brandenstein, lower left, pilot; and Dr. William E. Thornton, upper left, Guion S. Bluford, upper right; and Dale E. Gardner, all mission specialists.

  2. Powder pressing in a macrosonic field

    NASA Technical Reports Server (NTRS)

    Protipopescu, A.; Dragan, O.; Ciovica, D.

    1974-01-01

    An investigation was conducted to extend the technology of powder product manufacturing to new forms and sizes, to improve their quality as well as pressing efficiency and to reduce waste. In the course of metal and nonmetal powder briquette pressing, macrosounds were associated with the external static pressing force, which led to an increase in the relative height, density and physicomechanical characteristics of the briquettes. This method permits the extension of the range of products that can be manufactured from powders and the improvement of their quality.

  3. Course Does a Critical Study of Press in Capitalist Society.

    ERIC Educational Resources Information Center

    Winter, James

    1986-01-01

    Describes a course that documents in often laborious and relatively uncritical detail the history of the Canadian press and its American and British antecedents. Describes a course on the contemporary press consisting of various forms of press criticism. (HTH)

  4. Relationship between upper-body strength and bat swing speed in high-school baseball players.

    PubMed

    Miyaguchi, Kazuyoshi; Demura, Shinich

    2012-07-01

    This study aimed to clarify the relationship between upper-body strength and bat swing speed in high-school baseball players and to examine the physical characteristics of home run hitters (sluggers). The subjects were 30 male high-school baseball players with national tournament experience at the Koshien Stadium. Bat swing speed exerted by full effort was measured with a microwave-type speed-measuring instrument. One-repetition maximum (1RM) of a bench press (BP), BP power (bench power) using a light load (30 kg), and isokinetic chest press (0.4, 0.8, 1.2 m·s(-1)) were measured as upper-body strength. The relationships between bat swing speed and upper-body strength values were examined. Additionally, the t-test was used to reveal the mean differences between 14 home run hitters (group A) and 16 mediocre hitters (group B) for each measurement value. The bat swing speed showed significant and middle correlations with the 1RM BP (r = 0.59), bench power (0.41), and isokinetic chest press (0.48-0.55). Group A had significantly higher values in bench power and isokinetic chest press (high-speed) per kilogram of body weight than did group B. The swing speed showed significant correlations (r = 0.62) with the 1RM BP in group B but not in group A. In conclusion, to improve the hitting power of high-school baseball players, it may also be important to develop bench power with light loads in addition to 1RM BP. PMID:21921820

  5. Apollo 13 Facts [Post Flight Press Conference

    NASA Technical Reports Server (NTRS)

    2001-01-01

    The Apollo 13 astronauts, James Lovell, Jr., John Swigert, Jr., and Fred Haise, Jr., are seen during this post flight press conference. They describe their mission and answer questions from the audience.

  6. Student Press Law: What Lies Ahead?

    ERIC Educational Resources Information Center

    Eveslage, Thomas

    1980-01-01

    Assesses recent developments in student press rights in the areas of prior restraint, libel and obscenity, and material and substantial disruption, and predicts future trends in student rights litigation. (TJ)

  7. Gas-driven filter pressing in magmas

    USGS Publications Warehouse

    Sisson, T.W.; Bacon, C.R.

    1999-01-01

    Most silicic and some mafic magmas expand via second boiling if they crystallize at depths of about 10 km or less. The buildup of gas pressure due to second boiling can be relieved by expulsion of melt out of the region of crystallization, and this process of gas-driven filter pressing assists the crystallization differentiation of magmas. For gas-driven filter pressing to be effective, the region of crystallization must inflate slowly relative to buildup of pressure and expulsion of melt These conditions are satisfied in undercooled magmatic inclusions and in thin sheets of primitive magma underplating cooler magma reservoirs. Gas-driven filter pressing thereby adds fractionated melt to magma bodies. Gas-driven filter pressing is probably the dominant process by which highly evolved melts segregate from crystal mush to form aplitic dikes in granitic plutons; this process could also account for the production of voluminous, crystal-poor rhyolites.

  8. Thermal Conductances of Pressed Copper Contacts

    NASA Technical Reports Server (NTRS)

    Salerno, L.; Kittel, P.; Spivak, A.

    1986-01-01

    Report describes investigation of thermal conductivities of smooth copper contacts pressed together at liquid-helium temperatures. Investigation prompted by need for accurate thermal models for infrared detectors and other cryogenic instruments.

  9. Carnotite resources of San Miguel bench, Montrose County, Colorado

    USGS Publications Warehouse

    Alvord, Donald Clayton

    1955-01-01

    San Miguel bench includes about 4 square miles in the southern part of T. 48 N., R. 17 W., New Mexico principal meridian, Montrose County, Colorado. Production of carnotite ore from the area has been about 15,000 short tons having an estimated average grade of 0.31 percent U3O8 and 1.6 percent V2O5. Nearly all of the carnotite deposits occur in a single continuous sandstone bed near the top of the Salt Wash member of the Jurassic Morrison formation. These deposits consist chiefly of sandstone impregnated with uranium- and vanadium-bearing minerals. They are irregular tabular-shaped masses ranging in size from a few short tons to 30,000 short tons or more of minable carnotite ore. During the period November 27, 1951, to April 17, 1953, the U.S. Geological Survey drilled 309 holes totaling 92,194 feet on the San Miguel bench. Reserves total about 43,000 short tons of material 1 foot or more thick and contain 0.10 percent or More U3O8 or 1.0 percent or more V2O5. Of these reserves 3,300 short tons occur in private land. These reserves are in ten deposits found by Geological Survey drilling. Potential reserves (reserves based on geologic evidence only) are predicted to total about 15,000 short tons, averaging 0.30 percent U3O8 and 1.6 percent V2O5. No additional drilling in the San Miguel bench is planned by the Geological Survey. Some drilling by private enterprise is recommended.

  10. Carnotite resources of the Dolores bench, Montrose County, Colorado

    USGS Publications Warehouse

    Jobin, Daniel Alfred

    1953-01-01

    The Dolores bench is about 2 miles northwest of Uravan, Montrose County, Colo. From 1913 to November 1952 about 95,000 short tons of ore averaging 0.40 percent U3O8 and 2.0 percent V2O5 was mined from the Dolores bench. The production represents three periods of activity--1913-18, 1938-43, and 1948-52. The ore deposits are in broad sandstone lenses near the top of the Salt Wash member of the Jurassic Morrison formation. The deposits are mainly impregnations of sandstone by carnotite and vanadiferous clay minerals. The deposits are irregular tabular layers which occasionally include pod-like masses called “rolls”. The rolls as well as the mineralized areas enclosing them have a poorly defined northeast trend. Between December 4, 1951, and August 1, 1952, the U.S. Geological Survey diamond-drilled 183 holes totaling 53,654 feet. The indicated and inferred reserves of carnotite-bearing material, and the pounds of contained U3O8 and V2O5 area summarized in table 1. At the highest thickness and grade cutoffs (1 foot thick and 0.10 percent U3O8 or 1.0 percent V2O5), indicated and inferred ore reserves total 90,000 short tons, averaging 0.33 percent U3O8 and 2.11 percent V2O5. These reserves include only those discovered by U.S. Geological Survey drilling. Potential reserves, whose existence is based on geologic evidence alone, are estimated to be about 10,000 short tons, averaging about 0.30 percent U3O8 and 2.00 percent V2O5. No additional exploration of the Dolores bench is planned by the Geological Survey. Diamond drilling by claim owners is recommended in several parts of the area.

  11. Design guidelines for high dimensional stability of CFRP optical bench

    NASA Astrophysics Data System (ADS)

    Desnoyers, Nichola; Boucher, Marc-André; Goyette, Philippe

    2013-09-01

    In carbon fiber reinforced plastic (CFRP) optomechanical structures, particularly when embodying reflective optics, angular stability is critical. Angular stability or warping stability is greatly affected by moisture absorption and thermal gradients. Unfortunately, it is impossible to achieve the perfect laminate and there will always be manufacturing errors in trying to reach a quasi-iso laminate. Some errors, such as those related to the angular position of each ply and the facesheet parallelism (for a bench) can be easily monitored in order to control the stability more adequately. This paper presents warping experiments and finite-element analyses (FEA) obtained from typical optomechanical sandwich structures. Experiments were done using a thermal vacuum chamber to cycle the structures from -40°C to 50°C. Moisture desorption tests were also performed for a number of specific configurations. The selected composite material for the study is the unidirectional prepreg from Tencate M55J/TC410. M55J is a high modulus fiber and TC410 is a new-generation cyanate ester designed for dimensionally stable optical benches. In the studied cases, the main contributors were found to be: the ply angular errors, laminate in-plane parallelism (between 0° ply direction of both facesheets), fiber volume fraction tolerance and joints. Final results show that some tested configurations demonstrated good warping stability. FEA and measurements are in good agreement despite the fact that some defects or fabrication errors remain unpredictable. Design guidelines to maximize the warping stability by taking into account the main dimensional stability contributors, the bench geometry and the optical mount interface are then proposed.

  12. Design of a Test Bench for Intraocular Lens Optical Characterization

    NASA Astrophysics Data System (ADS)

    Alba-Bueno, Francisco; Vega, Fidel; Millán, María S.

    2011-01-01

    The crystalline lens is the responsible for focusing at different distances (accommodation) in the human eye. This organ grows throughout life increasing in size and rigidity. Moreover, due this growth it loses transparency through life, and becomes gradually opacified causing what is known as cataracts. Cataract is the most common cause of visual loss in the world. At present, this visual loss is recoverable by surgery in which the opacified lens is destroyed (phacoemulsification) and replaced by the implantation of an intraocular lens (IOL). If the IOL implanted is mono-focal the patient loses its natural capacity of accommodation, and as a consequence they would depend on an external optic correction to focus at different distances. In order to avoid this dependency, multifocal IOLs designs have been developed. The multi-focality can be achieved by using either, a refractive surface with different radii of curvature (refractive IOLs) or incorporating a diffractive surface (diffractive IOLs). To analyze the optical quality of IOLs it is necessary to test them in an optical bench that agrees with the ISO119679-2 1999 standard (Ophthalmic implants. Intraocular lenses. Part 2. Optical Properties and Test Methods). In addition to analyze the IOLs according to the ISO standard, we have designed an optical bench that allows us to simulate the conditions of a real human eye. To do that, we will use artificial corneas with different amounts of optical aberrations and several illumination sources with different spectral distributions. Moreover, the design of the test bench includes the possibility of testing the IOLs under off-axis conditions as well as in the presence of decentration and/or tilt. Finally, the optical imaging quality of the IOLs is assessed by using common metrics like the Modulation Transfer Function (MTF), the Point Spread Function (PSF) and/or the Strehl ratio (SR), or via registration of the IOL's wavefront with a Hartmann-Shack sensor and its

  13. Bench scale experiment of recovery of chlorine from waste gas

    SciTech Connect

    Hine, F.; Kurata, Y.; Nozaki, M.

    1984-12-01

    A bench scale experiment with a 50A cell equipped with a Nafion membrane has been conducted. Electrolyte is a mixture of HCl and CuCl/sub 2/. Chlorine is generated at the graphite anode, and cupric chloro-comple ions are reduced at the graphite cathode. The catholyte effluent is sent to the packed tower, where the cuprous ions are oxidized by chlorine in the waste gas. The cost evaluation for chlorine production in full-scale plants of various sizes is also described.

  14. Quality Assessment of Vertical Angular Deviations for Photometer Calibration Benches

    NASA Astrophysics Data System (ADS)

    Silva Ribeiro, A.; Costa Santos, A.; Alves Sousa, J.; Forbes, A. B.

    2015-02-01

    Lighting, both natural and electric, constitutes one of the most important aspects of the life of human beings, allowing us to see and perform our daily tasks in outdoor and indoor environments. The safety aspects of lighting are self-evident in areas such as road lighting, urban lighting and also indoor lighting. The use of photometers to measure lighting levels requires traceability obtained in accredited laboratories, which must provide an associated uncertainty. It is therefore relevant to study the impact of known uncertainty sources like the vertical angular deviation of photometer calibration benches, in order to define criteria to its quality assessment.

  15. Bench Crater Meteorite: Hydrated Asteroidal Material Delivered to the Moon

    NASA Technical Reports Server (NTRS)

    Joy, K. H.; Messenger, S.; Zolensky, M. E.; Frank, D. R.; Kring, D. A.

    2013-01-01

    D/H measurements from the lunar regolith agglutinates [8] indicate mixing between a low D/H solar implanted component and additional higher D/H sources (e.g., meteoritic/ cometary/volcanic gases). We have determined the range and average D/H ratio of Bench Crater meteorite, which is the first direct D/H analysis of meteoritic material delivered to the lunar surface. This result provides an important ground truth for future investigations of lunar water resources by missions to the Moon.

  16. STS-57 crewmembers examine stowage locker contents during bench review

    NASA Technical Reports Server (NTRS)

    1993-01-01

    STS-57 Endeavour, Orbiter Vehicle (OV) 105, crewmembers, wearing clean suits, examine stowage locker contents during their bench review at Boeing's Flight Equipment Processing Facility (FEPF) located near JSC. Pilot Brian J. Duffy pulls equipment from a locker while Commander Ronald J. Grabe (behind him), Mission Specialist 2 (MS2) Nancy J. Sherlock, Payload Commander (PLC) G. David Low (holding checklist), and MS3 Peter J.K. Wisoff discuss checklist procedures. The crewmembers reviewed equipment locations for OV-105 as well as the SPACEHAB-01 (Commercial Middeck Augmentation Module (CMAM)) experiment stowage locations. Photo taken by NASA JSC contract photographer Benny Benavides.

  17. STS-65 crewmembers participate in bench review at Boeing Building

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Attired in clean suits, STS-65 Payload Commander (PLC) Richard J. Hieb (left) and Payload Specialist Chiaki Mukai examine the contents of a stowage locker during a bench review at Boeing's Flight Equipment Processing Facility (FEPF) near the Johnson Space Center (JSC). In the background, Commander Robert D. Cabana inspects additional equipment to be carried aboard the Space Shuttle Columbia, Orbiter Vehicle (OV) 102, for the scheduled July flight of the second International Microgravity Laboratory (IML-2) mission. Mukai represents Japan's National Space Development Agency (NASDA). Photo taken by NASA JSC contract photographer Scott A. Wickes.

  18. A space stable optical bench structure for the space telescope wide field and planetary camera

    NASA Technical Reports Server (NTRS)

    Smith, D. D.

    1980-01-01

    The design, fabrication, and verification tests of two optical bench structures fabricated under contract to the Jet Propulsion Laboratory are discussed. It is noted that graphite-epoxy and invar have been selected as the structural materials for the bench. The ability to manufacture a precise graphite-epoxy optical system platform has been demonstrated. It is noted that the 19 channel laser interferometer was used to measure the CTE of the bench structure graphite-epoxy components and the two invar bulkheads.

  19. Willingness to join community-based health insurance among rural households of Debub Bench District, Bench Maji Zone, Southwest Ethiopia

    PubMed Central

    2014-01-01

    Background Even though Ethiopia bears high burden of diseases, utilization of modern health care services is limited. One of the reasons for low utilization of healthcare services is the user-fee charges. Moving away from out-of-pocket charges for healthcare at the time of use is an important step towards averting the financial hardship associated with paying for health service. Prepaid plans for health are not accustomed in Ethiopia. Therefore, social and community based health insurance schemes were introduced since 2010. In this study, willingness of rural households in Debub Bench District, to join community based health insurance was assessed. Method Cross-sectional community based study was conducted in Debub Bench District in March 2013 using a pretested structured questionnaire. Two stage sampling technique was used to select 845 households as study units which were allocated to the kebeles proportionately. The sampled households were selected using simple random sampling technique. Data were entered into EPIDATA 3.0 and analyzed with SPSS version 20. Result Among 845 sampled households, 808 were interviewed (95.6% response rate). About 78% of the respondents were willing to join the scheme. Most of demographic, socioeconomic variables and social capital were found to be significantly associated with willingness to join community based health insurance. Conclusion If the scheme is initiated in the district, majority of the households will enroll in the community based health insurance. Farmers, the married households, Bench ethnic groups and illiterate, the dominant segments of the population, are more likely to enroll the schemes. Therefore initiation of the scheme is beneficial in the district. PMID:24920538

  20. A laser guide star wavefront sensor bench demonstrator for TMT.

    PubMed

    Lardiere, Olivier; Conan, Rodolphe; Bradley, Colin; Jackson, Kate; Herriot, Glen

    2008-04-14

    Sodium laser guide stars (LGSs) allow, in theory, Adaptive Optics (AO) systems to reach a full sky coverage, but they have their own limitations. The artificial star is elongated due to the sodium layer thickness, and the temporal and spatial variability of the sodium atom density induces changing errors on wavefront measurements, especially with Extremely Large Telescopes (ELTs) for which the LGS elongation is larger. In the framework of the Thirty-Meter-Telescope project (TMT), the AO-Lab of the University of Victoria (UVic) has built an LGS-simulator test bed in order to assess the performance of new centroiding algorithms for LGS Shack-Hartmann wavefront sensors (SH-WFS). The design of the LGS-bench is presented, as well as laboratory SH-WFS images featuring 29x29 radially elongated spots, simulated for a 30-m pupil. The errors induced by the LGS variations, such as focus and spherical aberrations, are characterized and discussed. This bench is not limited to SH-WFS and can serve as an LGS-simulator test bed to any other LGS-AO projects for which sodium layer fluctuations are an issue. PMID:18542656

  1. The Gemini MCAO bench: system overview and lab integration

    NASA Astrophysics Data System (ADS)

    Bec, Matthieu; Rigaut, Francois J.; Galvez, Ramon; Arriagada, Gustavo; Boccas, Maxime; Gausachs, Gaston; Gratadour, Damien; James, Eric; Rojas, Roberto; Rogers, Rolando; Sheehan, Michael P.; Trancho, Gelys; Vucina, Tomislav

    2008-07-01

    We present Canopus, the AO bench for Gemini's Multi Conjugate Adaptive Optics System (GEMS), a unique facility for the Gemini South telescope located at Cerro Pachon in Chile. The MCAO system uses five laser beacons in conjunction with different natural guide stars configurations. A deployable fold mirror located in the telescope Acquisition and Guiding Unit (A&G) sends the telescope beam to the entrance of the bench. The beam is split within Canopus into three main components: two sensing paths and the output corrected science beam. Light from the laser constellation (589nm) is directed to five Shack-Hartman wave front sensors (E2V-39 CCDs read at 800Hz). Visible light from natural guide stars is sent to three independent sensors arrays (SCPM AQ4C Avalanche Photodiodes modules in quad cell arrangement) via optical fibers mounted on independent stages and a slow focus sensor (E2V-57 back-illuminated CCD). The infrared corrected beam exits Canopus and goes to instrumentation for science. The Real Time Controller (RTC) analyses wavefront signals and correct distortions using a fast tip-tilt mirror and three deformable mirrors conjugated at different altitudes. The RTC also adjusts positioning of the laser beacon (Beam Transfer Optics fast steering array), and handles miscellaneous offloads (M1 figure, M2 tip/tilt, LGS zoom and magnification corrections, NGS probes adjustments etc.). Background optimizations run on a separate dedicated server to feed new parameters into the RTC.

  2. Bench-scale Analysis of Surrogates for Anaerobic Digestion Processes.

    PubMed

    Carroll, Zachary S; Long, Sharon C

    2016-05-01

    Frequent monitoring of anaerobic digestion processes for pathogen destruction is both cost and time prohibitive. The use of surrogates to supplement regulatory monitoring may be one solution. To evaluate surrogates, a semi-batch bench-scale anaerobic digester design was tested. Bench-scale reactors were operated under mesophilic (36 °C) and thermophilic (53-55 °C) conditions, with a 15 day solids retention time. Biosolids from different facilities and during different seasons were examined. USEPA regulated pathogens and surrogate organisms were enumerated at different times throughout each experiment. The surrogate organisms included fecal coliforms, E. coli, enterococci, male-specific and somatic coliphages, Clostridium perfringens, and bacterial spores. Male-specific coliphages tested well as a potential surrogate organism for virus inactivation. None of the tested surrogate organisms correlated well with helminth inactivation under the conditions studied. There were statistically significant differences in the inactivation rates between the facilities in this study, but not between seasons. PMID:27131309

  3. Laboratory bench for the characterization of triboelectric properties of polymers

    NASA Astrophysics Data System (ADS)

    Neagoe, Bogdan; Prawatya, Yopa; Zeghloul, Thami; Souchet, Dominique; Dascalescu, Lucian

    2015-10-01

    The use of polymers as materials for sliding machine components is due to their low cost, ease of manufacturing, as well as appropriate mechanical and thermal properties. The aim of this paper is to present the experimental bench designed for the study of the triboelectric charge generated in sliding conformal contacts between flat polymer materials. The experiments were performed with 4-mm-thick samples of polystyrene and 5-mm-thick samples of poly-vinyl-chloride.The normal contact force can be adjusted using an appropriate control system and measured by a force sensor (± 50 N). The translational back-and-forth motion of the samples is produced by a crank-shaft system that generates a sinusoidal translational speed profile, with amplitudes between 12 and 50 mm/s, for strokes of 36 to 60 mm. The distribution of charge at the surface of the samples is measured by the capacitive probe of an electrostatic voltmeter (± 10 kV). The experiments pointed out that this bench enables the evaluation of the non-uniformity of the electric charge accumulated on the sliding bodies and the study of the correlations that might exists between this charge and the external forces applied to the contact.

  4. Graphic Arts: Book Three. The Press and Related Processes.

    ERIC Educational Resources Information Center

    Farajollahi, Karim; And Others

    The third of a three-volume set of instructional materials for a graphic arts course, this manual consists of nine instructional units dealing with presses and related processes. Covered in the units are basic press fundamentals, offset press systems, offset press operating procedures, offset inks and dampening chemistry, preventive maintenance…

  5. Along Freedom's Double Edge: The Arab Press Under Israeli Occupation.

    ERIC Educational Resources Information Center

    Nasser, Munir K.

    This paper examines the Arab press under Israeli occupation and presents two hypotheses: freedom of the press under occupation serves both Israeli interests and the Arab population, and freedom of the Arab press under occupation is "relative" and "controlled." By allowing freedom of expression, the Israelis achieve several aims: a free press will…

  6. Textbook Sales Drop, and University Presses Search for Reasons

    ERIC Educational Resources Information Center

    Howard, Jennifer

    2008-01-01

    This article reports that textbook sales are falling at many university presses, a trend that has accelerated in the past couple of months. That's the word from press directors anxious about the decline but unsure what's causing it or how to stop it. Not every press has been affected. Two of the biggest players, Oxford University Press and…

  7. Roller presses -- Versatile equipment for mineral processing

    SciTech Connect

    Pietsch, W.

    1995-12-31

    Roller presses were first invented in the middle of the 19th century for the economical size enlargement of coal fines as fuels. In addition to contemporary coal briquetting, in fields such as smokeless fuel and form-coke, it was found that redesigned and modernized roller presses, which are now capable of exerting high forces, are versatile machines for many tasks in mineral processing. Today they are used for: the classic pressure agglomeration and the new high pressure comminution. In pressure agglomeration, the characteristics of fine minerals are improved by forming briquettes or granulated products from compacts. During size enlargement with roller presses briquettes are directly obtained while granular materials are produced by crushing and sizing of compacted sheets. A relatively new application of roller presses in mineral processing is the utilization of the crushing effect when brittle materials pass the nip area between the rollers. It was found that this crushing mechanism is very efficient thus saving energy, particularly in grinding circuits handling large capacities. The paper introduces the fundamentals of the process and describes the design as well as applications of modern roller presses in mineral processing.

  8. Lever-press conditioning in the crab.

    PubMed

    Abramson, C I; Feinman, R D

    1990-08-01

    An operant chamber has been developed for studying lever-press conditioning in the green crab Carcinus maenas. In one series of experiments, animals were presented with a single bar and were reinforced with food for every bar press. Performance increased over time and high rates of responding were observed after 2 days of training. The response rate was always higher than that for a yoked (noncontingent) control group. When the contingencies were switched, the animals adjusted to the new conditions. Discrimination in the lever-press apparatus was demonstrated in a second experiment in which crabs had to choose between two bars, one (S+) caused food to be dispensed while the other (S-) was inactive. Experimental animals pressed the S+ bar at a significantly higher rate than the S- bar. When the contingencies associated with the lever were reversed, animals learned to switch to the correct bar by the second day. It was not necessary to reinforce every response: animals maintained high rates of responding on a schedule where every other response was reinforced. Animals used different methods of pressing the bar; the most common was extension of the claw, predominantly at the meropodite-carpopodite joint. PMID:2255730

  9. AUPress: A Comparison of an Open Access University Press with Traditional Presses

    ERIC Educational Resources Information Center

    McGreal, Rory; Chen, Nian-Shing

    2011-01-01

    This study is a comparison of AUPress with three other traditional (non-open access) Canadian university presses. The analysis is based on the rankings that are correlated with book sales on Amazon.com and Amazon.ca. Statistical methods include the sampling of the sales ranking of randomly selected books from each press. The results of one-way…

  10. A precision press-fit instrument for assembling small parts

    NASA Astrophysics Data System (ADS)

    Lou, Zhifeng; Wang, Xiaodong; You, Bo; Xu, Yang

    2015-02-01

    In the paper, a precision press-fit instrument for assembling small interference fitting parts is introduced, which includes pressing module and parts alignment module. The pressing module was used to clamp and position parts, and parts alignment module was used for the two parts' alignment. Through analyzing press-fit control method, component alignment and adjustment strategy, and machine vision device calibration method, the instrument meets the pressing requirements of precision small components. Finite element method is used to predict the reasonable range of press-fit force, and pressing result of the instrument is tested by experiments.

  11. Questions of testing rate and flexibility of rocket test benches, discussed on the basis of the test benches of Nitrochemie GMBH in Aschau

    NASA Technical Reports Server (NTRS)

    LEGRAND

    1987-01-01

    The rocket test benches are used to study burnup behavior by various methods. In the first ten months of 1966, 1578 shots were performed to test propellants, and 920 to test 14 thrust and pressure measurement projects.

  12. Machine Shop I. Learning Activity Packets (LAPs). Section C--Hand and Bench Work.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains two learning activity packets (LAPs) for the "hand and bench work" instructional area of a Machine Shop I course. The two LAPs cover the following topics: hand and bench work and pedestal grinder. Each LAP contains a cover sheet that describes its purpose, an introduction, and the tasks included in the LAP; learning steps…

  13. Measure Twice, Build Once: Bench-Scale Testing to Evaluate Bioretention Media Design

    EPA Science Inventory

    The paper discusses the utility of conducting bench-scale testing on selected bioretention media and media amendments to validate hydrologic properties before installing media and amendments in larger pilot- or full-scale rain garden installations. The bench-scale study conclude...

  14. 30 CFR 817.74 - Disposal of excess spoil: Preexisting benches.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... to a lower preexisting bench by means of gravity transport may be approved by the regulatory authority provided that— (1) The gravity transport courses are determined on a site-specific basis by the..., and downslope of the lower bench should excess spoil accidentally move; (2) All gravity...

  15. 30 CFR 816.74 - Disposal of excess spoil: Preexisting benches.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... to a lower preexisting bench by means of gravity transport may be approved by the regulatory authority provided that— (1) The gravity transport courses are determined on a site-specific basis by the..., and downslope of the lower bench should excess spoil accidentally move; (2) All gravity...

  16. Improvement of touch sensitivity by pressing.

    PubMed

    Jeong, Hie-yong; Higashimori, Mitsuru; Kaneko, Makoto

    2008-01-01

    It is really interesting to know how a blood flow has an influence on a touch sensitivity during human fingertip exploration over an environment. In this paper, we examine experimentally how the touch sensitivity is changed under the condition that the blood flow is interrupted compulsorily by pressing the proximal phalange of human finger. Through the weight discrimination test based on Weber's Law, we found that the touch sensitivity improves temporarily with the statistical significance test of below 0.1 %, when a finger proximal phalange is bound and pressed. Experimental results also show that there exists a meaningful correlationship between the stiffness of fingertip and the touch sensitivity. PMID:19163188

  17. STS-121: Discovery Post Launch Press Briefing

    NASA Technical Reports Server (NTRS)

    2006-01-01

    The briefing begins with Dean Acousta (NASA Press Secretary) introducing Michael Griffin (NASA Administrator), Bill Gerstenmaier (Associate Administrator for Space Operations) Wayne Hale (Space Shuttle Program Manager), John Shannon (Chairman, Mission Management Team, JSC), and Mike Leinbach (NASA Launch Director). The teams effort and dedication paid off in the form of a perfect launch and the weather cooperated. The Mission Management Team no problems during inspection. Debris assessment at 2 min. 47 sec. and 4 min. 50 sec. will be discussed when that information becomes available.The floor was then open for questions from the press.

  18. Aerial view of the Press Site

    NASA Technical Reports Server (NTRS)

    1998-01-01

    In this aerial view, The News Center sits beyond a large parking lot, on a hill at the northeastern end of the Launch Complex 39 Area , next to the turn basin (at left). From left, the grandstand faces the launch pads several miles away on the Atlantic seashore; behind it, the television studio is the site of media conferences; next, the large white-roofed building is the hub of information and activity for press representatives. Lined up on the right of the Press Site are various buildings and trailers, home to major news networks. The parking lot can accommodate the hundreds of media personnel who attend Space Shuttle launches.

  19. A ground-water reconnaissance of the Jacmel-Meyer Bench, Haiti

    USGS Publications Warehouse

    Taylor, George C., Jr.

    1949-01-01

    The Jacmel-Meyer bench lies on the south coast of the southern peninsula of Haiti in the Department de l'Ouest. Jacmel, at the west end of the bench, is about 40 kilometers airline southwest of Port-au-Prince. In the early part of January 1949, the writer in company with Mr. Rémy Lemoine made a reconnaissance study of the ground-water conditions of the bench. The object of the reconnaissance was to determine the availability of ground water for irrigation of the bench as well as for the public water supply of Jacmel. Irrigation is practiced on the bench, bu the existing water supplies are insufficient to cover all irrigable lands. Jacmel is at present supplied with water from a pipe line that delivers the flow of several developed springs to the city by gravity. However, this supply is inadequate and probably at times is contaminated.

  20. Medical immunology: two-way bridge connecting bench and bedside.

    PubMed

    Rijkers, Ger T; Damoiseaux, Jan G M C; Hooijkaas, Herbert

    2014-12-01

    Medical immunology in The Netherlands is a laboratory specialism dealing with immunological analyses as well as pre- and post-analytical consultation to clinicians (clinical immunologists and other specialists) involved in patients with immune mediated diseases. The scope of medical immunology includes immunodeficiencies, autoimmune diseases, allergy, transfusion and transplantation immunology, and lymphoproliferative disorders plus the monitoring of these patients. The training, professional criteria, quality control of procedures and laboratories is well organized. As examples of the bridge function of medical immunology between laboratory (bench) and patient (bedside) the contribution of medical immunologists to diagnosis and treatment of primary immunodeficiency diseases (in particular: humoral immunodeficiencies) as well as autoantibodies (anti-citrullinated proteins in rheumatoid arthritis) are given. PMID:25455599

  1. Continuous bench-scale tests to assess METHOXYCOAL process performance

    SciTech Connect

    Knight, R.A.

    1991-01-01

    Laboratory-scale research conducted at Southern Illinois University at Carbondale (SIUC) has shown that coal pyrolysis in the presence of CH{sub 4} and small quantities of O{sub 2} (the METHOXYCOAL process) can produce high yields of liquids and valuable chemicals compared to conventional pyrolysis. The addition of MgO, coal ash, and clays have been shown to further enhance coal conversion. The goal of this two-year project is to build upon that laboratory research by conducting continuous bench-scale tests at IGT. Tests are being conducted with IBC-101 coal under CH{sub 4}/O{sub 2} blends with and without added coal ash, MgO, and/or clays, at temperatures and pressures up to 1000{degrees}F and 200 psig. These tests will provide data to select preferred operating conditions for chemicals production from high-sulfur Illinois coals.

  2. From bench to patient: model systems in drug discovery.

    PubMed

    Breyer, Matthew D; Look, A Thomas; Cifra, Alessandra

    2015-10-01

    Model systems, including laboratory animals, microorganisms, and cell- and tissue-based systems, are central to the discovery and development of new and better drugs for the treatment of human disease. In this issue, Disease Models & Mechanisms launches a Special Collection that illustrates the contribution of model systems to drug discovery and optimisation across multiple disease areas. This collection includes reviews, Editorials, interviews with leading scientists with a foot in both academia and industry, and original research articles reporting new and important insights into disease therapeutics. This Editorial provides a summary of the collection's current contents, highlighting the impact of multiple model systems in moving new discoveries from the laboratory bench to the patients' bedsides. PMID:26438689

  3. Task 3 -- Bench-scale char upgrading and utilization study

    SciTech Connect

    Jha, M.C.; McCormick, R.L.

    1989-08-02

    This report describes the results of the bench-scale char upgrading study conducted as Task 3 of Development of an Advanced, Continuous Mild Gasification Process for the Production of Coproducts. A process where the char is gasified to produce methane in a first stage reactor was investigated. This methane is then decomposed to produce carbon and hydrogen for recycle in a second stage. The results indicate that both reaction steps are feasible using mild gasification char as the starting feedstock. Conditions for methanation are 700 to 800 C and 200 to 400 psig. Carbon formation conditions are 1,200 to 1,400 C at atmospheric pressure. The carbon produced has properties similar to those of carbons which are commercially marketed as carbon black.

  4. Design, fabrication, and bench testing of a solar chemical receiver

    NASA Technical Reports Server (NTRS)

    Summers, W. A.; Pierre, J. F.

    1981-01-01

    Solar thermal energy can be effectively collected, transported, stored, and utilized by means of a chemical storage and transport system employing the reversible SO2 oxidation reaction. A solar chemical receiver for SO3 thermal decomposition to SO2 and oxygen was analyzed. Bench tests of a ten foot section of a receiver module were conducted with dissociated sulfuric acid (SO3 and H2O) in an electrical furnace. Measured percent conversion of SO3 was 85% of the equilibrium value. Methods were developed to fabricate and assemble a complete receiver module. These methods included applying an aluminide coating to certain exposed surfaces, assembling concentric tubes with a wire spacer, applying a platinum catalyst to the tubing wall, and coiling the entire assembly into the desired configuration.

  5. Coal-bench architecture as a means of understanding regional changes in coal thickness and quality

    SciTech Connect

    Greb, S.F.; Eble, C.F.; Hower, J.C.

    1996-09-01

    Analysis of the Fire Creek (Westphalian B), Pond Creek (lower Westphalian B), and Stockton (Westphalian B) coals, three of the most heavily mined coals in the Central Appalachian Basin, shows that all have a similar multiple-bench architecture of at least two benches split by a regional clastic parting or durain. Coal benches beneath regionally extensive partings are generally less continuous, thinner, more palynologically variable, higher in ash yield, and higher in sulfur content than coal benches above regional partings in all three coals. Where thick, benches above regional partings tend to exhibit temporal palynological changes from lycopod- to fern-dominant. Where inertinite-rich/fern-dominant benches are overlain by additional benches, the upper benches are limited in extent, variable in thickness, high in sulfur content and ash yield, and split away from the coal. The multiple-bench architecture exhibited by these coals is interpreted to represent a cyclic mire succession that was common in the Middle Pennsylvanian. Peats began as planar mires infilling an irregular topography during rising base level. When the topography was infilled, unconfined flooding was possible and resulted in widespread partings. Ponding above these clay-rich flood deposits led to re-establishment of new planar mires with greater continuity than the underlying mires. The extent of these mires provided buffers to clastic influx and, in many cases, allowed domed conditions to develop. Doming resulted in thick, high-quality coal benches. In some cases, a third stage of planar peats, with similar characteristics to the planar peats at the base of the beds, developed on the unevenly distributed clastics that buried underlying mires during continued base-level rise.

  6. 7 CFR 58.421 - Press.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Press. 58.421 Section 58.421 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE...

  7. Does Science Get the Press It Deserves?

    ERIC Educational Resources Information Center

    Wilkie, Tom

    1991-01-01

    Discusses concerns about public understanding of science in the United Kingdom in relation to structure and content of newspapers, particularly the inadequacy of the press to be a vehicle for promoting scientific literacy within the citizenry. Argues that changes in science coverage by the media must originate from the scientific community with…

  8. When International Press Rights "Are" the News

    ERIC Educational Resources Information Center

    Freedman, Eric

    2006-01-01

    In many countries, reporters and editors face criminal prosecution, censorship, self-censorship, exile, tax audits, loss of broadcast and publication licenses, loss of jobs, assault, and even assassination based on how they practice their profession. Press rights and human rights advocacy groups try to draw media and official attention to those…

  9. Press Site Auditorium dedicated to John Holliman

    NASA Technical Reports Server (NTRS)

    1999-01-01

    A ceremony dedicated the KSC Press Site auditorium as the John Holliman Auditorium to honor the correspondent for his enthusiastic, dedicated coverage of America's space program. The auditorium was built in 1980 and has been the focal point for new coverage of Space Shuttle launches. The ceremony followed the 94th launch of a Space Shuttle, on mission STS-96, earlier this morning.

  10. Research Review: The Specialized Business Press.

    ERIC Educational Resources Information Center

    Endres, Kathleen L.

    1994-01-01

    Reviews scholarly research (from journalism, communication, business, and the humanities) on the specialized business press. Notes the lack of theory building and ties across disciplines, and anticipates that new advances in CD-ROM technology may increase research into the field as well as strengthen ties across disciplines. (SR)

  11. An Introduction to Bibliographical Press Work.

    ERIC Educational Resources Information Center

    Richardson, John V., Jr.

    This guide to the literature of bibliographical press work is comprised of brief introductory notes on the field and this bibliography, followed by citations listed in seven categories: (1) book production, (2) handmade paper, (3) printer's ink, (4) type design, (5) book design, (6) hand printing, and (7) hand bookbinding. Introductory as well as…

  12. U.S. BICENTENNIAL EXPOSITION PRESS CONFERENCE

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Fielding questions from the press concerning 3rd Century America, the Bicentennial Exposition on Science and Technology are [left to right]: Herbert J. Rowe, NASA Associate Administrator for External Affairs; Miles Ross, KSC Deputy Director and Bicentennial General Manager; Lee Scherer, KSC Director, and Paul Donnelly, KSC Director of Space Transportation System Processing and Chief of the Exposition Site Development and Operations Office.

  13. 28 CFR 540.64 - Press pools.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been... national and international news services; (2) The television and radio networks and outlets; (3) The...

  14. 28 CFR 540.64 - Press pools.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been... national and international news services; (2) The television and radio networks and outlets; (3) The...

  15. 28 CFR 540.64 - Press pools.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been... national and international news services; (2) The television and radio networks and outlets; (3) The...

  16. Student Press Corps (Use the News).

    ERIC Educational Resources Information Center

    Mahler, Susan

    1989-01-01

    Describes the Student Press Corps, a program in which high school students submit weekly columns concerning local high school events for editing and possible publication by the local newspaper. Reports that training sessions have been fully enrolled for two years and that all participants are extremely positive about the program. (RS)

  17. Being Black in America: The Press Portrayal.

    ERIC Educational Resources Information Center

    Martindale, Carolyn

    Acknowledging inadequacies of press coverage of black Americans during this century, a study examined how a medium sized Ohio daily newspaper covered blacks before, during, and after the civil rights movement. Items concerning blacks in 66 issues of the Youngstown "Vindicator" from the 1950s, 1960s, and 1970s were studied, and the findings…

  18. Strategic Elites, the Press, and Race Relations.

    ERIC Educational Resources Information Center

    Domke, David

    2000-01-01

    Examines 2 important congressional debates about race relations, and the relationship of journalism to these debates, in the late 19th century. Suggests that political elites commonly used news, opinion, and perceptions in press content and by journalists to support, defend, and buttress certain policy positions in these debates. (SR)

  19. Free Press in a Constitutional Democracy

    ERIC Educational Resources Information Center

    Lucianek, Christine

    2014-01-01

    This article describes a lesson in which students will examine several views expressed by the founders to understand the context for including freedom of the press in the First Amendment. Students will be asked to think about the role that the news media and the need to be an informed citizen continue to play in our democracy. Students will…

  20. A Journalist's Guide to the Free Press.

    ERIC Educational Resources Information Center

    Ingelhart, Louis

    1996-01-01

    Summarizes the content of the federal constitution and various state constitutions regarding freedom of the press. Examines certain borderline issues, including actions and expressions, pornography, defamation, libel, and copyrighted material. States that regulation of unprotected material must be reasonable, specific, and clear. Discusses what…

  1. Communications in Agriculture: The American Farm Press.

    ERIC Educational Resources Information Center

    Evans, James F.; Salcedo, Rodolfo N.

    This book studies communications in agriculture, focusing on the American farm press. As defined here, a commercial farm periodical is directed to farmers and supports itself through the sale of subscriptions or advertising. It includes local as well as regional and national periodicals. A 90-year analysis, from 1880 to 1970, was chosen because…

  2. 7 CFR 58.421 - Press.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Press. 58.421 Section 58.421 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE...

  3. The Press Conferences of Eleanor Roosevelt.

    ERIC Educational Resources Information Center

    Beasley, Maurine H.

    Newly discovered transcriptions of 87 of First Lady Eleanor Roosevelt's women-only press conferences held from 1933 to 1945 make possible an examination of the objectives, topics, and value of these conferences. By holding the conferences, Mrs. Roosevelt attributed to women an important function in the political communication process, and at the…

  4. College Student Press Law. Second Edition.

    ERIC Educational Resources Information Center

    Trager, Robert; Dickerson, Donna L.

    This second edition of a monograph provides updated information on court decisions concerning college student publications and underground newspapers to acquaint advisers, administrators, and students with college student press law. Chapters of the monograph examine freedom of speech on the college campus; the relationship between colleges and…

  5. The Press, Privacy, and Community Mores.

    ERIC Educational Resources Information Center

    Glasser, Theodore L.

    Because of judicial indifference and legislative inaction, the conflict between the right of privacy and the freedom of the press is no closer to a resolution than it was a century ago. William Prosser's reduction of the common law of privacy into four separate torts has not solved the problem. The concept of "newsworthiness" has not been helpful…

  6. 28 CFR 540.64 - Press pools.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been... national and international news services; (2) The television and radio networks and outlets; (3) The...

  7. 28 CFR 540.64 - Press pools.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been... national and international news services; (2) The television and radio networks and outlets; (3) The...

  8. STS-9 Spacelab 1 Press Kit

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Press information on the STS-9/SPACELAB 1 mission is provided. Launch preparations, launch window, flight objectives, experiments, life sciences baseline data collection, SPACELAB 1 payload operations and control crew and specialists, and tracking and data management are among the topics explained.

  9. Holding fixture for a hot stamping press

    NASA Technical Reports Server (NTRS)

    Harris, R. P. (Inventor)

    1983-01-01

    A hand held guide for manually positioning a work piece between the anvil rib and tool of a hot die stamping press is described. A groove completed by interchangeable cover plates attached at one end of the guide conforms to a cross sectional dimension common to similar workpieces and, with a force fit, retentively holds each of the workpieces.

  10. Eye-Pressing by Visually Impaired Children.

    ERIC Educational Resources Information Center

    Jan, James E.; And Others

    1983-01-01

    The nature of eye-pressing as a visual stimulation mannerism in children with severely impaired eyesight is examined, and a possible physiological explanation (that self-stimulation occurs when the demand of the brain for meaningful visual information is not met) is offered. (CL)

  11. Accuracy of Press Reports in Astronomy

    NASA Astrophysics Data System (ADS)

    Schaefer, B. E.; Hurley, K.; Nemiroff, R. J.; Branch, D.; Perlmutter, S.; Schaefer, M. W.; Consolmagno, G. J.; McSween, H.; Strom, R.

    1999-12-01

    Most Americans learn about modern science from press reports, while such articles have a bad reputation among scientists. We have performed a study of 403 news articles on three topics (gamma-ray astronomy, supernovae, and Mars) to quantitatively answer the questions 'How accurate are press reports of astronomy?' and 'What fraction of the basic science claims in the press are correct?' We have taken all articles on the topics from five news sources (UPI, NYT, S&T, SN, and 5 newspapers) for one decade (1987-1996). All articles were evaluated for a variety of errors, ranging from the fundamental to the trivial. For 'trivial' errors, S&T and SN were virtually perfect while the various newspapers averaged roughly one trivial error every two articles. For meaningful errors, we found that none of our 403 articles significantly mislead the reader or misrepresented the science. So a major result of our study is that reporters should be rehabilitated into the good graces of astronomers, since they are actually doing a good job. For our second question, we rated each story with the probability that its basic new science claim is correct. We found that the average probability over all stories is 70%, regardless of source, topic, importance, or quoted pundit. How do we reconcile our findings that the press does not make significant errors yet the basic science presented is 30% wrong? The reason is that the nature of news reporting is to present front-line science and the nature of front-line science is that reliable conclusions have not yet been reached. So a second major result of our study is to make the distinction between textbook science (with reliability near 100%) and front-line science which you read in the press (with reliability near 70%).

  12. Kiln for hot-pressing compacts in a continuous manner

    DOEpatents

    Reynolds, C.D Jr.

    1983-08-08

    The invention is directed to a hot pressing furnace or kiln which is capable of preheating, hot pressing, and cooling a plurality of articles in a sequential and continuous manner. The hot pressing furnace of the present invention comprises an elongated, horizontally disposed furnace capable of holding a plurality of displaceable pusher plates each supporting a die body loaded with refractory or ceramic material to be hot pressed. Each of these plates and the die body supported thereby is sequentially pushed through the preheating zone, a temperature stabilizing and a hot pressing zone, and a cooling zone so as to provide a continuous hot-pressing operation of a plurality of articles.

  13. Kiln for hot-pressing compacts in a continuous manner

    DOEpatents

    Reynolds, Jr., Carl D.

    1985-01-01

    The present invention is directed to a hot pressing furnace or kiln which is capable of preheating, hot pressing, and cooling a plurality of articles in a sequential and continuous manner. The hot pressing furnace of the present invention comprises an elongated, horizontally disposed furnace capable of holding a plurality of displaceable pusher plates each supporting a die body loaded with refractory or ceramic material to be hot pressed. Each of these plates and the die body supported thereby is sequentially pushed through the preheating zone, a temperature stabilizing and a hot pressing zone, and a cooling zone so as to provide a continuous hot-pressing operation of a plurality of articles.

  14. Bench scale demonstration and conceptual engineering for DETOX{sup SM} catalyzed wet oxidation

    SciTech Connect

    Moslander, J.; Bell, R.; Robertson, D.; Dhooge, P.; Goldblatt, S.

    1994-06-01

    Laboratory and bench scale studies of the DETOX{sup SM} catalyzed wet oxidation process have been performed with the object of developing the process for treatment of hazardous and mixed wastes. Reaction orders, apparent rates, and activation energies have been determined for a range of organic waste surrogates. Reaction intermediates and products have been analyzed. Metals` fates have been determined. Bench scale units have been designed, fabricated, and tested with solid and liquid organic waste surrogates. Results from the laboratory and bench scale studies have been used to develop conceptual designs for application of the process to hazardous and mixed wastes.

  15. 9. INTERIOR VIEW OF EYE PRESS AREA; TO LEFT IS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. INTERIOR VIEW OF EYE PRESS AREA; TO LEFT IS A TWO-BAY SLOTTED TYPE FURNACE, TO CENTER IS EYE PRESS, TO RIGHT IS CURCULAR SAW - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV

  16. 19. VIEW OF MOUNTING PRESS, showing removal of water guard ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. VIEW OF MOUNTING PRESS, showing removal of water guard prior to dismounting from press. Gary Stich, operator. - Juniata Shops, Erecting Shop & Machine Shop, East of Fourth Avenue, between Fourth & Fifth Streets, Altoona, Blair County, PA

  17. Human muscle power output during upper- and lower-body exercises.

    PubMed

    Siegel, Judith A; Gilders, Roger M; Staron, Robert S; Hagerman, Frederick C

    2002-05-01

    The purpose of this study was to evaluate the use of traditional resistance training equipment in the measurement of muscular power. This was accomplished by measuring the velocity of movement through a measured distance during maximal effort lifts using a Smith rack. The reliability of the method was established using 10 male volunteers who performed both bench press and squat exercises in a Smith rack. Maximal power output was determined at 30, 40, 50, 60, 70, 80, and 90% of the subject's 1 repetition maximum (1RM). Test-retest power values were not statistically different. Another 15 male volunteers who had previous muscle biopsy data from the vastus lateralis muscle performed the same maximal power output evaluation. There were no significant relationships between peak power outputs and fiber-type expressions when linear regressions were performed. The power curve produced by graphing power output vs. the percentage of 1RM indicates that peak power output occurs between 50 and 70% of 1RM for the squat and between 40 and 60% of 1RM for the bench press. These data indicate that this method of evaluation of muscle power is reliable, although it is not predictive of muscle fiber-type percentages. PMID:11991767

  18. METHOD FOR SOLVENT-ISOSTATIC PRESSING

    DOEpatents

    Archibald, P.B.

    1962-09-18

    This invention provides a method for producing densely compacted bodies having relatively large dimensions. The method comprises the addition of a small quantity of a suitable solvent to a powder which is to be compacted. The solvent- moistened powder is placed inside a flexible bag, and the bag is suspended in an isostatic press. The solvent is squeezed out of the powder by the isostatic pressure, and the resulting compacted body is recovered. The presence of the solvent markedly decreases the proportion of void space in the powder, thereby resulting in a denser, more homogeneous compact. Another effect of the solvent is that it allows the isostatic pressing operation to be conducted at substantially lower pressures than are conventionally employed. (AEC)

  19. Method for hot pressing beryllium oxide articles

    DOEpatents

    Ballard, Ambrose H.; Godfrey, Jr., Thomas G.; Mowery, Erb H.

    1988-01-01

    The hot pressing of beryllium oxide powder into high density compacts with little or no density gradients is achieved by employing a homogeneous blend of beryllium oxide powder with a lithium oxide sintering agent. The lithium oxide sintering agent is uniformly dispersed throughout the beryllium oxide powder by mixing lithium hydroxide in an aqueous solution with beryllium oxide powder. The lithium hydroxide is converted in situ to lithium carbonate by contacting or flooding the beryllium oxide-lithium hydroxide blend with a stream of carbon dioxide. The lithium carbonate is converted to lithium oxide while remaining fixed to the beryllium oxide particles during the hot pressing step to assure uniform density throughout the compact.

  20. Reducing VOC Press Emission from OSB Manufacturing

    SciTech Connect

    Dr. Gary D. McGinnis; Laura S. WIlliams; Amy E. Monte; Jagdish Rughani: Brett A. Niemi; Thomas M. Flicker

    2001-12-31

    Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board.

  1. [Ashi points, Ashi method and pressing reaction].

    PubMed

    Wang, Zhao-hui; Zhang, Zhi-feng; Ding, Xiao-jun; Zhou, Chang-le

    2011-04-01

    The nomination of Ashi points was reviewed, and the meaning of Ashi method was discussed in this article. On the base of further study on Huangdi Neijing (The Yellow Emperor's Canon of Internal Medicine), the general meaning of palpation at acupoints, meridians and collaterals to the process of acupoint locating were expounded. The concept of pressing reaction was proposed as well. It is held that Ashi points are a category of acupoints without specific names and definite locations. They are a kind of manifestation of reactions of acupoints, meridians and collaterals, which embody their dynamic features. Pressing reaction mainly manifested by sensations of comfort, pain, and moreover, relieving of the primary symptoms. It is the most basic evidence for us to estimate Ashi points. PMID:21528600

  2. 100 Area groundwater biodenitrification bench-scale treatability study procedures

    SciTech Connect

    Peyton, B.M.; Martin, K.R.

    1993-05-01

    This document describes the methodologies and procedures for conducting the bench-scale biodenitrification treatability tests at Pacific Northwest Laboratory{sup a} (PNL). Biodenitrification is the biological conversion of nitrate and nitrite to gaseous nitrogen. The tests will use statistically designed batch studies to determine if biodenitrification can reduce residual nitrate concentrations to 45 mg/L, the current maximum contaminant level (MCL). These tests will be carried out in anaerobic flasks with a carbon source added to demonstrate nitrate removal. At the pilot scale, an incremental amount of additional carbon will be required to remove the small amount of oxygen present in the incoming groundwater. These tests will be conducted under the guidance of Westinghouse Hanford Company (WHC) and the 100-HR-3 Groundwater Treatability Test Plan (DOE/RL-92-73) and the Treatability Study Program Plan (DOE/RL-92-48) using groundwater from 100-HR-3. In addition to the procedures, requirements for safety, quality assurance, reporting, and schedule are given. Appendices include analytical procedures, a Quality Assurance Project Plan, a Health and Safety Plan, and Applicable Material Data Safety Sheets. The procedures contained herein are designed specifically for the 100-HR-3 Groundwater Treatability Test Plan, and while the author believes that the methods described herein are scientifically valid, the procedures should not be construed or mistaken to be generally applicable to any other treatability study.

  3. Pattern Generator for Bench Test of Digital Boards

    NASA Technical Reports Server (NTRS)

    Berkun, Andrew C.; Chu, Anhua J.

    2012-01-01

    All efforts to develop electronic equipment reach a stage where they need a board test station for each board. The SMAP digital system consists of three board types that interact with each other using interfaces with critical timing. Each board needs to be tested individually before combining into the integrated digital electronics system. Each board needs critical timing signals from the others to be able to operate. A bench test system was developed to support test of each board. The test system produces all the outputs of the control and timing unit, and is delivered much earlier than the timing unit. Timing signals are treated as data. A large file is generated containing the state of every timing signal at any instant. This file is streamed out to an IO card, which is wired directly to the device-under-test (DUT) input pins. This provides a flexible test environment that can be adapted to any of the boards required to test in a standalone configuration. The problem of generating the critical timing signals is then transferred from a hardware problem to a software problem where it is more easily dealt with.

  4. Beyond bench and bedside: disentangling the concept of translational research.

    PubMed

    van der Laan, Anna Laura; Boenink, Marianne

    2015-03-01

    The label 'Translational Research' (TR) has become ever more popular in the biomedical domain in recent years. It is usually presented as an attempt to bridge a supposed gap between knowledge produced at the lab bench and its use at the clinical bedside. This is claimed to help society harvest the benefits of its investments in scientific research. The rhetorical as well as moral force of the label TR obscure, however, that it is actually used in very different ways. In this paper, we analyse the scientific discourse on TR, with the aim to disentangle and critically evaluate the different meanings of the label. We start with a brief reconstruction of the history of the concept. Subsequently, we unravel how the label is actually used in a sample of scientific publications on TR and examine the presuppositions implied by different views of TR. We argue that it is useful to distinguish different views of TR on the basis of three dimensions, related to (1) the construction of the 'translational gap'; (2) the model of the translational process; and (3) the cause of the perceived translational gap. We conclude that the motive to make society benefit from its investments in biomedical science may be laudable, but that it is doubtful whether the dominant views of TR will contribute to this end. PMID:23248053

  5. Oxygen-controlled biosurfactant production in a bench scale bioreactor.

    PubMed

    Kronemberger, Frederico de Araujo; Santa Anna, Lidia Maria Melo; Fernandes, Ana Carolina Loureiro Brito; Menezes, Reginaldo Ramos de; Borges, Cristiano Piacsek; Freire, Denise Maria Guimarães

    2008-03-01

    Rhamnolipids have been pointed out as promising biosurfactants. The most studied microorganisms for the aerobic production of these molecules are the bacteria of the genus Pseudomonas. The aim of this work was to produce a rhamnolipid-type biosurfactant in a bench-scale bioreactor by one strain of Pseudomonas aeruginosa isolated from oil environments. To study the microorganism growth and production dependency on oxygen, a nondispersive oxygenation device was developed, and a programmable logic controller (PLC) was used to set the dissolved oxygen (DO) concentration. Using the data stored in a computer and the predetermined characteristics of the oxygenation device, it was possible to evaluate the oxygen uptake rate (OUR) and the specific OUR (SOUR) of this microorganism. These rates, obtained for some different DO concentrations, were then compared to the bacterial growth, to the carbon source consumption, and to the rhamnolipid and other virulence factors production. The SOUR presented an initial value of about 60.0 mgO(2)/g(DW) h. Then, when the exponential growth phase begins, there is a rise in this rate. After that, the SOUR reduces to about 20.0 mgO(2)/g(DW) h. The carbon source consumption is linear during the whole process. PMID:18401751

  6. Bench Scale Test of Absorption Slurry-ice Maker

    NASA Astrophysics Data System (ADS)

    Sasao, Hiroyuki; Yoshida, Takashi

    Slurry ice system is desirable as cold heat source for air conditioning, because it requires less conveyance power or less pipe size. On the other hand, recently absorption refrigerator is reevaluated because it can utilize various types of waste heat and it does not use fluorocarbon refrigerant. But it had been regarded to be difficult to make ice by absorption refrigerator because the refrigerant is water. However making slurry ice is possible, of cource, if the slurry ice generated by partial freezing of water is continuously taken away from the evaporator. This method was certified experimentally with a bench scale model. For ice making continuously, ice had not to be frozen stiff at water surface or inside wall of the evaporator. Then refrigerant water in the evaporator was raised swirl flow. And inside wall of the evaporator was finished by water repellent coating, and heated from outside wall. This slurry ice was adaptable to hydraulic transportation, because ice was needle crystal with about 5 mm length and ice temperature was 0°C.

  7. A bench-scale biotreatability methodology to evaluate field bioremediation

    SciTech Connect

    Saberiyan, A.G.; MacPherson, J.R. Jr.; Moore, R.; Pruess, A.J.; Andrilenas, J.S.

    1995-12-31

    A bench-scale biotreatability methodology was designed to assess field bioremediation of petroleum contaminated soil samples. This methodology was performed successfully on soil samples from more than 40 sites. The methodology is composed of two phases, characterization and experimentation. The first phase is physical, chemical, and biological characterization of the contaminated soil sample. This phase determines soil parameters, contaminant type, presence of indigenous contaminant-degrading bacteria, and bacterial population size. The second phase, experimentation, consists of a respirometry test to measure the growth of microbes indirectly (via generation of CO{sub 2}) and the consumption of their food source directly (via contaminant loss). Based on a Monod kinetic analysis, the half-life of a contaminant can be calculated. Abiotic losses are accounted for based on a control test. The contaminant molecular structure is used to generate a stoichiometric equation. The stoichiometric equation yields a theoretical ratio for mg of contaminant degraded per mg of CO{sub 2} produced. Data collected from the respirometry test are compared to theoretical values to evaluate bioremediation feasibility.

  8. Improving optical bench radius measurements using stage error motion data

    SciTech Connect

    Schmitz, Tony L.; Gardner, Neil; Vaughn, Matthew; Medicus, Kate; Davies, Angela

    2008-12-20

    We describe the application of a vector-based radius approach to optical bench radius measurements in the presence of imperfect stage motions. In this approach, the radius is defined using a vector equation and homogeneous transformation matrix formulism. This is in contrast to the typical technique, where the displacement between the confocal and cat's eye null positions alone is used to determine the test optic radius. An important aspect of the vector-based radius definition is the intrinsic correction for measurement biases, such as straightness errors in the stage motion and cosine misalignment between the stage and displacement gauge axis, which lead to an artificially small radius value if the traditional approach is employed. Measurement techniques and results are provided for the stage error motions, which are then combined with the setup geometry through the analysis to determine the radius of curvature for a spherical artifact. Comparisons are shown between the new vector-based radius calculation, traditional radius computation, and a low uncertainty mechanical measurement. Additionally, the measurement uncertainty for the vector-based approach is determined using Monte Carlo simulation and compared to experimental results.

  9. Graphic Arts: The Press and Finishing Processes. Third Edition.

    ERIC Educational Resources Information Center

    Crummett, Dan

    This document contains teacher and student materials for a course in graphic arts concentrating on printing presses and the finishing process for publications. Seven units of instruction cover the following topics: (1) offset press systems; (2) offset inks and dampening chemistry; (3) offset press operating procedures; (4) preventive maintenance…

  10. Freedom of the Press in an International Perspective. Teaching Strategy.

    ERIC Educational Resources Information Center

    Miller, Barbara

    1997-01-01

    Presents a lesson plan that compares freedom of the press in the United States and other countries. Reveals the extent to which the First Amendment protects press freedom from abuses found in other countries. Includes a world map illustrating areas enjoying freedom of the press, and related statistical tables. (MJP)

  11. Through the Looking Glass: Press Responses to Genocide.

    ERIC Educational Resources Information Center

    Lipstadt, Deborah E.

    1991-01-01

    Examines press coverage of the Holocaust to analyze the response of the United States and the world to the Jewish extermination. Compares this coverage to earlier press responses to the Armenian genocide and Ukraine famines. Argues the press was unwilling to face the Holocaust's magnitude. Urges teachers to teach about the Holocaust and similar…

  12. The Rice University Press Initiative: An Interview with Charles Henry

    ERIC Educational Resources Information Center

    Trevitte, Chad; Henry, Charles

    2007-01-01

    In this interview Charles Henry, publisher of the Rice University Press (RUP), discusses RUP's rebirth as a fully digital university press. Henry addresses the circumstances that led to this decision, and he further outlines the RUP business model whereby the press will publish its own titles--both digitally and in print-on-demand--while…

  13. The Press, Japanese Americans, and the Concentration Camps.

    ERIC Educational Resources Information Center

    Okihiro, Gary Y.; Sly, Julie

    1983-01-01

    A study of the wartime press suggests that the plan to incarcerate Japanese Americans (under Executive Order 9066) was government-initiated, that the public and the press initially disapproved of such treatment, and that events emanating from the government influenced shifts in press and public opinion that allowed implementation of the plan.…

  14. Living Dangerously--Changing Press Law in India.

    ERIC Educational Resources Information Center

    Ryan, Timothy

    An examination of the changes in press laws after India gained its independence in 1947 shows how a free press is shaped mostly by the structure and evolution of the democratic society that it is intended to serve. The most salient features that have characterized the Indian press, from the early nineteenth century to the present day, are…

  15. The American Native Press and American Indian Studies.

    ERIC Educational Resources Information Center

    Littlefield, Daniel F., Jr.

    1986-01-01

    As product and process, the Native American press has a long history. The establishment of the first native-run press in 1828 began a press history that continues today. That history is represented by more than 2,000 periodical titles alone, two-thirds of which have been established during the past 20 years. Impressive collections of these…

  16. The Historical Importance of Jury to Press Freedom.

    ERIC Educational Resources Information Center

    Olasky, Marvin N.

    Staggered by some recent libel verdicts, many journalists are neglecting lessons about press freedom learned at great cost during the seventeenth and eighteenth centuries. Journalists then learned that state power over the press, residing in the hands of either censors or judges, leads to a decrease in press freedom. In 1986, though, many media…

  17. BENCH-SCALE RECOVERY OF LEAD USING AND ELECTRO- MEMBRANE/CHELATION PROCESS

    EPA Science Inventory

    This report presents the results of a bench-scale treatability test to investigate key process parameters influencing an innovative chelation electrodeposition process for recovery of lead from contaminated sons. thylenediamine tetraacetic acid (EDTA) and diethylenetriamine penta...

  18. ALTERNATIVE BIOLOGICAL TREATMENT PROCESSES FOR REMEDIATION OF CREOSOTE-CONTAMINATED MATERIALS: BENCH-SCALE TREATABILITY STUDIES

    EPA Science Inventory

    Bench-scale biotreatability studies were performed to determine the most effective of two bioremediation application strategies to ameliorate creosote and pentachlorophenol (PCP) contaminated soils present at the American Creosote Works Superfund site, Pensacola, Florida: olid-ph...

  19. The E-lens test bench for RHIC beam-beam compensation

    SciTech Connect

    Gu X.; Altinbas, F.Z.; Aronson, J.; Beebe, E. et al

    2012-05-20

    To compensate for the beam-beam effects from the proton-proton interactions at IP6 and IP8 in the Relativistic Heavy Ion Collider (RHIC), we are fabricating two electron lenses that we plan to install at RHIC IR10. Before installing the e-lenses, we are setting-up the e-lens test bench to test the electron gun, collector, GS1 coil, modulator, partial control system, some instrumentation, and the application software. Some e-lens power supplies, the electronics for current measurement will also be qualified on test bench. The test bench also was designed for measuring the properties of the cathode and the profile of the beam. In this paper, we introduce the layout and elements of the e-lens test bench; and we discuss its present status towards the end of this paper.

  20. The Inter American Press Association as Champion of Press Freedom: Reality or Rhetoric? The Bolivian Experience, 1952-1973.

    ERIC Educational Resources Information Center

    Knudson, Jerry W.

    Each year a committee on freedom of the press, established in 1946 by the Inter American Press Association (IAPA), exposes those countries which it feels do not have freedom of the press. In 1952 Bolivia underwent a social and economic revolution. As a result, angry mobs forced the closure of the two newspapers with the largest circulation in…

  1. 17 CFR 230.135e - Offshore press conferences, meetings with issuer representatives conducted offshore, and press...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... RULES AND REGULATIONS, SECURITIES ACT OF 1933 General § 230.135e Offshore press conferences, meetings... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Offshore press conferences, meetings with issuer representatives conducted offshore, and press-related materials released offshore....

  2. The effects of the topographic bench on ground motion from mining explosions

    SciTech Connect

    Bonner, J.L.; Blomberg, W.S.; Hopper, H.; Leidig, M.

    2005-07-01

    Understanding the effects of the bench on ground motion can improve the design of cast blasts and achieve improved blast efficiency while remaining below vibration requirements. A new dataset recorded in September 2003 from a coal mine in Arizona has allowed us to examine the excitation of short-period Rayleigh-type surface waves from four simultaneously-detonated explosions in and below a topographic bench of a mine. The explosions were recorded on a network of over 150 seismic sensors, providing an extensive understanding of the ground motion radiation patterns from these explosions. We detonated two separate explosions in the deepest pit of the mine, thus the explosions were shot to solid rock. Within 25 meters of these two explosions, we detonated two additional explosions of similar explosive yields in a bench, thus these explosions were shot to the free face. Radiation patterns and spectral ratios from the explosions show increased amplitudes at azimuths behind the bench relative to the amplitudes in front of the bench. We compared these findings to seismic observations from two {approximately} 1.5 million pound cast blasts at the same mine and found similar radiations patterns. Modeling of these blasts shows that the variations in ground motion are caused by the topographic bench as a result of 1) horizontal spalling of the rock falling into the pit and 2) non-linear scattering near the free-face. Shooting to a buffer also causes the azimuthal variations to be significantly reduced.

  3. Use of bench-top biological reactors for determining non-toxic disposal rates of wastes

    SciTech Connect

    Zaleski, R.T.; Lee, C.; Arnold, W.R.; Stewart, J.D.; Biddinger, G.R.

    1994-12-31

    During a recent turn-around in a high conversion refinery, a number of untreated waste streams were demonstrated to be toxic to rainbow trout in pre-release screening studies. The potential for these wastes to be detrimental to biomass in th facility`s biological oxidation unit (BIOX) and/or cause BIOX effluent to be toxic to the facility`s biomonitoring species was unknown. Consequently, bench-top biological reactors were used to investigate the potential effects of certain combinations of wastes on BIOX performance and final effluent toxicity. Physico-chemical parameters monitored in two control bench-top biological reactors, receiving the same input as the Refinery`s BIOX units, demonstrated that the bench-top reactors were representative surrogates for the facility`s BIOX treatment. Toxicity reductions, resulting from treatment of various waste streams using the bench scale reactors, were determined. Information from these studies was used to establish non-toxic discharge rates of the waste streams to the refinery`s BIOX. The authors will present an overview of the toxicity screening and bench scale biological reactor studies, as well as discuss the use of bench scale bioreactors in toxicity identification and prevention studies.

  4. Effect of hot pressing additives on the leachability of hot pressed sodium hydrous titanium oxide

    SciTech Connect

    Valentine, T.M.; Sambell, R.A.J.

    1980-01-01

    Sodium hydrous titanium oxide is an ion exchange resin which can be used for immobilizing medium level waste (MLW) liquors. When hot pressed, it undergoes conversion to a ceramic. Three low melting point materials (borax, bismuth trioxide, and a mixture of PbO/CuO) were added to the (Na)HTiO and the effect that each of these had on aiding densification was assessed. Hot pressing temperature, applied pressure, and percentage addition of hot pressing aid were varied. Percentage open porosity, flexural strength, and leachability were measured. There was a linear relationship between the percentage open porosity and the logarithm of the leach rate for a constant percentage addition of each additive.

  5. EX-PRESS Glaucoma Filtration Device: efficacy, safety, and predictability

    PubMed Central

    Chan, Jessica E; Netland, Peter A

    2015-01-01

    Trabeculectomy has been the traditional primary surgical therapy for open-angle glaucoma. While trabeculectomy is effective in lowering intraocular pressure, complications associated with the procedure have motivated the development of alternative techniques and devices, including the EX-PRESS Glaucoma Filtration Device. This review describes the efficacy, safety, complication rates, and potential advantages and disadvantages of the EX-PRESS Glaucoma Filtration Device. EX-PRESS implantation is technically simpler compared with that of trabeculectomy, with fewer surgical steps. Vision recovery has been more rapid after EX-PRESS implantation compared with trabeculectomy. Intraocular pressure variation is lower during the early postoperative period, indicating a more predictable procedure. While efficacy of the EX-PRESS implant has been comparable to trabeculectomy, postoperative complications appear less common after EX-PRESS implantation compared with trabeculectomy. The EX-PRESS Glaucoma Filtration Device appears to be safe and effective in the surgical management of open-angle glaucoma. PMID:26366105

  6. Bench-scale co-processing economic assessment. Final report

    SciTech Connect

    Gala, H.B.; Marker, T.L.; Miller, E.N.

    1994-11-01

    The UOP Co-Processing scheme is a single-stage slurry catalyzed process in which petroleum vacuum resid and coal are simultaneously upgraded to a high-quality synthetic oil. A highly active dispersed catalyst has been developed which enables the operation of the co-processing unit at relatively moderate and high temperatures and relatively high pressure. Under the current contract, a multi-year research program was undertaken to study the technical and economic feasibility of this technology. All the contractual tasks were completed. Autoclave experiments were carried out to evaluate dispersed vanadium catalysts, molybdenum catalysts, and a less costly UOP-proprietary catalyst preparation technique. Autoclave experiments were also carried out in support of the continuous pilot plant unit operation and to study the effects of the process variables (pressure, temperature, and metal loading on the catalyst). A total of 24 continuous pilot plant runs were made. Research and development efforts during the pilot plant operations were concentrated on addressing the cost effectiveness of the UOP single-stage slurry catalyzed co-processing concept based on UOP experience gained in the previous DOE contract. To this end, effect of catalyst metal concentration was studied and a highly-active Mo-based catalyst was developed. This catalyst enabled successful long-term operation (924 hours) of the continuous bench-scale plant at highly severe operating conditions of 3,000 psig, 465{degree}C temperature, and 2:1 resid-to-MAF (moisture- and ash-free) coal ratio with 0.1 wt % active metal. The metal loading of the catalyst was low enough to consider the catalyst as a disposable slurry catalyst. Also, liquid recycle was incorporated in the pilot plant design to increase the, reactor back mixing and to increase the flow of liquid through the reactor (to introduce turbulence in the reactor) and to represent the design of a commercial-scale reactor.

  7. Metabolic alterations and hepatitis C: From bench to bedside

    PubMed Central

    Chang, Ming-Ling

    2016-01-01

    In addition to causing cirrhosis and hepatocellular carcinoma, hepatitis C virus (HCV) is thought to cause hypolipidemia, hepatic steatosis, insulin resistance, metabolic syndrome, and diabetes. The viral life cycle of HCV depends on cholesterol metabolism in host cells. HCV core protein and nonstructural protein 5A perturb crucial lipid and glucose pathways, such as the sterol regulatory element-binding protein pathway and the protein kinase B/mammalian target of rapamycin/S6 kinase 1 pathway. Although several lines of transgenic mice expressing core or full HCV proteins exhibit hepatic steatosis and/or dyslipidemia, whether they completely reflect the metabolic alterations in humans with HCV infection remains unknown. Many cross-sectional studies have demonstrated increased prevalences of metabolic alterations and cardiovascular events in patients with chronic hepatitis C (CHC); however, conflicting results exist, primarily due to unavoidable individual variations. Utilizing anti-HCV therapy, most longitudinal cohort studies of CHC patients have demonstrated the favorable effects of viral clearance in attenuating metabolic alterations and cardiovascular risks. To determine the risks of HCV-associated metabolic alterations and associated complications in patients with CHC, it is necessary to adjust for crucial confounders, such as HCV genotype and host baseline glucose metabolism, for a long follow-up period after anti-HCV treatment. Adipose tissue is an important endocrine organ due to its release of adipocytokines, which regulate lipid and glucose metabolism. However, most data on HCV infection and adipocytokine alteration are inconclusive. A comprehensive overview of HCV-associated metabolic and adipocytokine alterations, from bench to bedside, is presented in this topic highlight. PMID:26819514

  8. BENCH-SCALE DEMONSTRATION OF HOT-GAS DESULFURIZATION TECHNOLOGY

    SciTech Connect

    1998-05-01

    The Direct Sulfur Recovery Process (DSRP) is a one- or two-stage catalytic reduction process for efficiently converting to elemental sulfur up to 98 percent or more of the sulfur dioxide (SO{sub 2}) contained in the regeneration offgas streams produced in advanced integrated gasification combined cycle (IGCC) power systems. The DSRP reacts the regeneration offgas with a small slipstream of coal gas to effect the desired reduction. In this project the DSRP was demonstrated with actual coal gas (as opposed to the simulated laboratory mixtures used in previous studies) in a 75-mm, 1-L size fixed-bed reactor. Integrated with this testing, a US Department of Energy/Research Triangle Institute (DOE/RTI) patented zinc titanate-based fluidizable sorbent formulation was tested in a 75-mm (3-in.) diameter fluidized-bed reactor, and the regeneration offgas from that test was treated with the bench-unit DSRP. The testing was conducted at the DOE Federal Energy Technology Center (FETC)-Morgantown in conjunction with test campaigns of the pilot-scale gasifier there. The test apparatus was housed in a mobile laboratory built in a specially equipped office trailer that facilitated moving the equipment from RTI in North Carolina to the West Virginia test site. A long duration test of the DSRP using actual coal gas and simulated regeneration offgas showed no degradation in efficiency of conversion to elemental sulfur after 160 h of catalyst exposure. An additional exposure (200 h) of that same catalyst charge at the General Electric pilot gasifier showed only a small decline in performance. That problem is believed to have been caused by tar and soot deposits on the catalyst, which were caused by the high tar content of the atypical fixed-bed gasifier gas. A six-fold larger, single-stage skid-mounted DSRP apparatus was fabricated for additional, larger-scale slipstream testing.

  9. EWB: The Environment WorkBench Version 4.0

    NASA Technical Reports Server (NTRS)

    1995-01-01

    The Environment WorkBench EWB is a desktop integrated analysis tool for studying a spacecraft's interactions with its environment. Over 100 environment and analysis models are integrated into the menu-based tool. EWB, which was developed for and under the guidance of the NASA Lewis Research Center, is built atop the Module Integrator and Rule-based Intelligent Analytic Database (MIRIAD) architecture. This allows every module in EWB to communicate information to other modules in a transparent manner from the user's point of view. It removes the tedious and error-prone steps of entering data by hand from one model to another. EWB runs under UNIX operating systems (SGI and SUN workstations) and under MS Windows (3.x, 95, and NT) operating systems. MIRIAD, the unique software that makes up the core of EWB, provides the flexibility to easily modify old models and incorporate new ones as user needs change. The MIRIAD approach separates the computer assisted engineering (CAE) tool into three distinct units: 1) A modern graphical user interface to present information; 2) A data dictionary interpreter to coordinate analysis; and 3) A database for storing system designs and analysis results. The user interface is externally programmable through ASCII data files, which contain the location and type of information to be displayed on the screen. This approach provides great flexibility in tailoring the look and feel of the code to individual user needs. MIRIADbased applications, such as EWB, have utilities for viewing tabulated parametric study data, XY line plots, contour plots, and three-dimensional plots of contour data and system geometries. In addition, a Monte Carlo facility is provided to allow statistical assessments (including uncertainties) in models or data.

  10. Metabolic alterations and hepatitis C: From bench to bedside.

    PubMed

    Chang, Ming-Ling

    2016-01-28

    In addition to causing cirrhosis and hepatocellular carcinoma, hepatitis C virus (HCV) is thought to cause hypolipidemia, hepatic steatosis, insulin resistance, metabolic syndrome, and diabetes. The viral life cycle of HCV depends on cholesterol metabolism in host cells. HCV core protein and nonstructural protein 5A perturb crucial lipid and glucose pathways, such as the sterol regulatory element-binding protein pathway and the protein kinase B/mammalian target of rapamycin/S6 kinase 1 pathway. Although several lines of transgenic mice expressing core or full HCV proteins exhibit hepatic steatosis and/or dyslipidemia, whether they completely reflect the metabolic alterations in humans with HCV infection remains unknown. Many cross-sectional studies have demonstrated increased prevalences of metabolic alterations and cardiovascular events in patients with chronic hepatitis C (CHC); however, conflicting results exist, primarily due to unavoidable individual variations. Utilizing anti-HCV therapy, most longitudinal cohort studies of CHC patients have demonstrated the favorable effects of viral clearance in attenuating metabolic alterations and cardiovascular risks. To determine the risks of HCV-associated metabolic alterations and associated complications in patients with CHC, it is necessary to adjust for crucial confounders, such as HCV genotype and host baseline glucose metabolism, for a long follow-up period after anti-HCV treatment. Adipose tissue is an important endocrine organ due to its release of adipocytokines, which regulate lipid and glucose metabolism. However, most data on HCV infection and adipocytokine alteration are inconclusive. A comprehensive overview of HCV-associated metabolic and adipocytokine alterations, from bench to bedside, is presented in this topic highlight. PMID:26819514

  11. Stuck at the bench: Potential natural neuroprotective compounds for concussion

    PubMed Central

    Petraglia, Anthony L.; Winkler, Ethan A.; Bailes, Julian E.

    2011-01-01

    Background: While numerous laboratory studies have searched for neuroprotective treatment approaches to traumatic brain injury, no therapies have successfully translated from the bench to the bedside. Concussion is a unique form of brain injury, in that the current mainstay of treatment focuses on both physical and cognitive rest. Treatments for concussion are lacking. The concept of neuro-prophylactic compounds or supplements is also an intriguing one, especially as we are learning more about the relationship of numerous sub-concussive blows and/or repetitive concussive impacts and the development of chronic neurodegenerative disease. The use of dietary supplements and herbal remedies has become more common place. Methods: A literature search was conducted with the objective of identifying and reviewing the pre-clinical and clinical studies investigating the neuroprotective properties of a few of the more widely known compounds and supplements. Results: There are an abundance of pre-clinical studies demonstrating the neuroprotective properties of a variety of these compounds and we review some of those here. While there are an increasing number of well-designed studies investigating the therapeutic potential of these nutraceutical preparations, the clinical evidence is still fairly thin. Conclusion: There are encouraging results from laboratory studies demonstrating the multi-mechanistic neuroprotective properties of many naturally occurring compounds. Similarly, there are some intriguing clinical observational studies that potentially suggest both acute and chronic neuroprotective effects. Thus, there is a need for future trials exploring the potential therapeutic benefits of these compounds in the treatment of traumatic brain injury, particularly concussion. PMID:22059141

  12. Method for hot press forming articles

    DOEpatents

    Baker, Robert R.; Hartsock, Dale L.

    1982-01-01

    This disclosure relates to an improved method for achieving the best bond strength and for minimizing distortion and cracking of hot pressed articles. In particular, in a method for hot press forming both an outer facing circumferential surface of and an inner portion of a hub, and of bonding that so-formed outer facing circumferential surface to an inner facing circumferential surface of a pre-formed ring thereby to form an article, the following improvement is made. Normally, in this method, the outside ring is restrained by a restraining sleeve of ring-shaped cross-section having an inside diameter. A die member, used to hot press form the hub, is so-formed as to have an outside diameter sized to engage the inside diameter of the restraining sleeve in a manner permitting relative movement therebetween. The improved method is one in which several pairs of matched restraining sleeve and die member are formed with each matched pair having a predetermined diameter. The predetermined diameter of each matched pair is different from another matched pair by stepped increments. The largest inside diameter of a restraining sleeve is equal to the diameter of the outer facing circumferential surface of the hub. Each pair of the matched restraining sleeve and die member is used to form an article in which an inside hub is bonded to an outside ring. The several samples so-formed are evaluated to determine which sample has the best bond formed between the hub and the ring with the least or no cracking or distortion in the ring portion of the article. Thereafter, the matched restraining sleeve and die member which form the article having the best bonding characteristics and least distortion cracking is then used for repeated formations of articles.

  13. Evacuated optical structure comprising optical bench mounted to sidewall of vacuum chamber in a manner which inhibits deflection and rotation of the optical bench

    DOEpatents

    Bowers, J.M.

    1994-04-19

    An improved evacuated optical structure is disclosed comprising an optical bench mounted in a vacuum vessel in a manner which inhibits transmission of movement of the vacuum vessel to the optical bench, yet provides a compact and economical structure. The vacuum vessel is mounted, through a sidewall thereof, to a support wall at four symmetrically positioned and spaced apart areas, each of which comprises a symmetrically positioned group of mounting structures passing through the sidewall of the vacuum vessel. The optical bench is pivotally secured to the vacuum vessel by four symmetrically spaced apart bolts and spherical bearings, each of which is centrally positioned within one of the four symmetrically positioned groups of vacuum vessel mounting structures. Cover plates and o-ring seals are further provided to seal the vacuum vessel mounting structures from the interior of the vacuum vessel, and venting bores are provided to vent trapped gases in the bores used to secure the cover plates and o-rings to the vacuum vessel. Provision for detecting leaks in the mounting structures from the rear surface of the vacuum vessel sidewall facing the support wall are also provided. Deflection to the optical bench within the vacuum vessel is further minimized by tuning the structure for a resonant frequency of at least 100 Hertz. 10 figures.

  14. Evacuated optical structure comprising optical bench mounted to sidewall of vacuum chamber in a manner which inhibits deflection and rotation of the optical bench

    DOEpatents

    Bowers, Joel M.

    1994-01-01

    An improved evacuated optical structure is disclosed comprising an optical bench mounted in a vacuum vessel in a manner which inhibits transmission of movement of the vacuum vessel to the optical bench, yet provides a compact and economical structure. The vacuum vessel is mounted, through a sidewall thereof, to a support wall at four symmetrically positioned and spaced apart areas, each of which comprises a symmetrically positioned group of mounting structures passing through the sidewall of the vacuum vessel. The optical bench is pivotally secured to the vacuum vessel by four symmetrically spaced apart bolts and spherical bearings, each of which is centrally positioned within one of the four symmetrically positioned groups of vacuum vessel mounting structures. Cover plates and o-ring seals are further provided to seal the vacuum vessel mounting structures from the interior of the vacuum vessel, and venting bores are provided to vent trapped gases in the bores used to secure the cover plates and o-rings to the vacuum vessel. Provision for detecting leaks in the mounting structures from the rear surface of the vacuum vessel sidewall facing the support wall are also provided. Deflection to the optical bench within the vacuum vessel is further minimized by tuning the structure for a resonant frequency of at least 100 Hertz.

  15. Press Site Auditorium dedicated to John Holliman

    NASA Technical Reports Server (NTRS)

    1999-01-01

    From left, Center Director Roy Bridges and NASA Administrator Daniel S. Goldin applaud as Jay Holliman, with the help of his mother, Mrs. Dianne Holliman, unveils a plaque honoring his father, the late John Holliman. At right is Tom Johnson, news group chairman of CNN. The occasion was the dedication of the KSC Press Site auditorium as the John Holliman Auditorium to honor the CNN national correspondent for his enthusiastic, dedicated coverage of America's space program. The auditorium was built in 1980 and has been the focal point for new coverage of Space Shuttle launches. The ceremony followed the 94th launch of a Space Shuttle, on mission STS-96, earlier this morning.

  16. Press Site Auditorium dedicated to John Holliman

    NASA Technical Reports Server (NTRS)

    1999-01-01

    NASA Administrator Daniel S. Goldin hands Mrs. Dianne Holliman a plaque honoring her late husband, John Holliman, a CNN national correspondent. Standing behind Goldin is Center Director Roy Bridges. At right is Tom Johnson, news group chairman of CNN. A ceremony dedicated the KSC Press Site auditorium as the John Holliman Auditorium to honor the correspondent for his enthusiastic, dedicated coverage of America's space program. The auditorium was built in 1980 and has been the focal point for new coverage of Space Shuttle launches. The ceremony followed the 94th launch of a Space Shuttle, on mission STS-96, earlier this morning.

  17. STS-99 / Endeavour: Launch Postponement Press Conference

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Live footage shows Ron Dittemore, the Shuttle Program Manager from Johnson Space Center (JSC), participating in a Launch Postponement Press Conference disclosing the status of the STS-99 flight. He addresses the weather condition which caused the postponement and the erroneous response from one of the Master Events Controllers (MEC). The moderator of this conference is Bruce Buckingham from NASA's Public Affairs Office. Ron answers questions from the audience about the MEC responsible for sending commands for launch, and the implications that it might have on the launch schedule.

  18. Abstracts of Suburban Press Critique Series Papers Produced by the Suburban Press Research Center from April 1966 to May 1973. Suburban Press Research Series No. 15.

    ERIC Educational Resources Information Center

    Northern Illinois Univ., De Kalb. Suburban Press Research Center.

    Abstracts of 28 articles, collected by the Suburban Press Research Center, are provided in this paper. The articles discuss various aspects of the suburban press: pretrial coverage; news coverage for adolescents, the family, and the aged; editorials; education news; business news; crime coverage; consumer information; the formation of policies…

  19. The Ebb and Flow of the Liberalization of the Jordanian Press: 1985-1997.

    ERIC Educational Resources Information Center

    Najjar, Orayb Aref

    1998-01-01

    Contributes to scholarship on the complexities of press freedom in non-Western nations. Discusses the context of press freedom in Jordan; the press before the 1989 liberalization; factors that favored press liberalization in 1989; the 1993 press law; the "Temporary Law for the Year 1997"; press reaction to the amendments; and factors mitigating…

  20. Physical and Chemical Properties of Bench Sediments in Self-Formed Agricultural Drainage Channels

    NASA Astrophysics Data System (ADS)

    Brooker, M.; Witter, J.; Islam, K. R.; Mouser, P. J.

    2014-12-01

    Two-stage ditches are a novel approach to managing agricultural drainage and are designed with floodplain benches set within the banks of a standard, trapezoidal channel. The floodplain bench serves to attenuate pollutant loads in surface waters through (1) capture of sediments, (2) nutrient assimilation by vegetation, and (3) transformation of C and residual N and P by indigenous microorganisms. Two-stage channels have been constructed in the tri-state region of Ohio-Michigan-Indiana over the last decade with initial results indicating C and P sequestration and enhanced N removal via denitrification. However, the sustainability and the net ecosystem services provided by these designs are relatively unknown beyond this timeframe. To better characterize the properties of two-stage ditches aged more than a decade, we examined the physical and chemical properties of sediments in unplanned, self-formed floodplain benches across 5 distinct Midwest ecoregions. Established benches were selected from 3 locations within each ecoregion and sampled along depth and bench-positional gradients from geo-referenced sites. The sediment-bound C, N, and P concentrations were quantified along with soil texture and channel geomorphology. Nutrient concentrations did not differ across bench position (upstream, downstream, near bank, or near channel); however, significant differences were observed between ecoregions. Steeper slopes and higher benches were associated with higher sand content than surrounding soils and promoted greater storage of C and N. Gradual slopes, on the other hand, were associated with higher clay and silt content. Across these specific ecoregions, P storage declined with increasing depth. However, this was unexplained by the particle size distribution at these depths. Further research is therefore needed to investigate whether P is released from waterlogged sediments or there is biological redistribution of this nutrient across the column depth.

  1. Apollo 11 Astronauts During Press Conference

    NASA Technical Reports Server (NTRS)

    1969-01-01

    The night before launch day, Apollo 11 crew members (R-L) Michael Collins, Neil Armstrong, and Edwin Aldrin, participated in a closed circuit press conference the night before they began their historic lunar landing mission. At far left is chief astronaut and director of flight crew operations, Donald K. Slayton. The press conference with questions via intercom, was held under semi-isolation conditions to avoid exposing the astronauts to possible illness at the last minute. The Apollo 11 mission, the first lunar landing mission, launched from the Kennedy Space Center (KSC) in Florida via the Marshall Space Flight Center (MSFC) developed Saturn V launch vehicle on July 16, 1969 and safely returned to Earth on July 24, 1969. Aboard the space craft were astronauts Neil A. Armstrong, commander; Michael Collins, Command Module (CM) pilot; and Edwin E. (Buzz) Aldrin Jr., Lunar Module (LM) pilot. The CM, 'Columbia', piloted by Collins, remained in a parking orbit around the Moon while the LM, 'Eagle'', carrying astronauts Armstrong and Aldrin, landed on the Moon. On July 20, 1969, Armstrong was the first human to ever stand on the lunar surface, followed by Aldrin. During 2½ hours of surface exploration, the crew collected 47 pounds of lunar surface material for analysis back on Earth. With the success of Apollo 11, the national objective to land men on the Moon and return them safely to Earth had been accomplished.

  2. Effect of core strength on the measure of power in the extremities.

    PubMed

    Shinkle, Justin; Nesser, Thomas W; Demchak, Timothy J; McMannus, David M

    2012-02-01

    The purpose of this study was to (a) develop a functional field test to assess the role of the core musculature and its impact on sport performance in an athletic population and (b) develop a functional field test to determine how well the core can transfer forces from the lower to the upper extremities. Twenty-five DI collegiate football players performed medicine ball throws (forward, reverse, right, and left) in static and dynamic positions. The results of the medicine ball throws were compared with several athletic performance measurements: 1 repetition maximum (1RM) squat, squat kg/bw, 1RM bench press, bench kg/bw, countermovement vertical jump (CMJ), 40-yd dash (40 yd), and proagility (PrA). Push press power (PWR) was used to measure the transfer of forces through the body. Several correlations were found in both the static and dynamic medicine ball throws when compared with the performance measures. Static reverse correlated with CMJ (r = 0.44), 40 yd (r = 0.5), and PrA (r = 0.46). Static left correlated with bench kg/bw (0.42), CMJ (0.44), 40 yd (0.62), and PrA (0.59). Static right also correlated with bench kg/bw (0.41), 40 yd (0.44), and PrA (0.65). Dynamic forward (DyFw) correlated with the 1RM squat (r = 0.45) and 1RM bench (0.41). Dynamic left and Dynamic right correlated with CMJ, r = 0.48 and r = 0.40, respectively. Push press power correlated with bench kg/bw (0.50), CMJ (0.48), and PrA (0.48). A stepwise regression for PWR prediction identified 1RM squat as the best predictor. The results indicate that core strength does have a significant effect on an athlete's ability to create and transfer forces to the extremities. Currently, plank exercises are considered an adequate method of training the core for athletes to improve core strength and stability. This is a problem because it puts the athletes in a nonfunctional static position that is very rarely replicated in the demands of sport-related activities. The core is the center of most kinetic

  3. Careers in Government: Bench Scientist to Policy Wonk

    NASA Astrophysics Data System (ADS)

    Gebbie, Katharine B.

    1998-04-01

    The U.S. system for graduate education in physics is arguably the most effective system yet devised for advanced training in physics. Focused as it is on original research, it teaches students to identify significant problems, study them in depth, and communicate the results. Because it trains them to be analytical, adaptable, persevering, and pragmatic problem solvers, it prepares them for a wide variety of nontraditional careers. Hence the demand for physicists by Wall Street and management consultant teams. Yet, as stressed in the 1995 report by the Committee on Science, Engineering and Public Policy (COSEPUP)("Reshaping the Graduate Education of Scientists and Engineers," COSEPUP; National Academy of Sciences/National Academy of Engineering/Institute of Medicine. National Academy Press, 1995), what is lacking is exposure to career information and guidance. Many students appear to be unaware of the range and richness of opportunities outside academe. In an effort to fill this gap, illustrative examples of diverse careers and career changes in government will be presented, together with examples of cooperative programs that can enhance the student's appreciation of career possibilities.

  4. Direct drive digital servo press with high parallel control

    NASA Astrophysics Data System (ADS)

    Murata, Chikara; Yabe, Jun; Endou, Junichi; Hasegawa, Kiyoshi

    2013-12-01

    Direct drive digital servo press has been developed as the university-industry joint research and development since 1998. On the basis of this result, 4-axes direct drive digital servo press has been developed and in the market on April of 2002. This servo press is composed of 1 slide supported by 4 ball screws and each axis has linearscale measuring the position of each axis with high accuracy less than μm order level. Each axis is controlled independently by servo motor and feedback system. This system can keep high level parallelism and high accuracy even with high eccentric load. Furthermore the 'full stroke full power' is obtained by using ball screws. Using these features, new various types of press forming and stamping have been obtained by development and production. The new stamping and forming methods are introduced and 'manufacturing' need strategy of press forming with high added value and also the future direction of press forming are also introduced.

  5. Post flight press conference for the STS-7 mission

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Two of the three mission specialists for STS-7 field questions from the press during the post-flight press conference in JSC's main auditorium on July 1, 1983. Left to right are John M. Fabian and Dr. Norman E. Thagard (35419); Portrait view of Fabian during the STS-7 post-flight press conference (35420); Portrait view of mission specialist Dr. Sally K. Ride during the STS-7 post-flight press conference (35421); Portrait view of STS-7 pilot Frederick H. Hauck during the post-flight press conference (35422); Portrait view of STS-7 crew commander Robert L. Crippen during the post-flight press conference (35423); Three STS-7 crew members listen to questions from news reporters. They are, left to right, Crippen, Hauck, and Ride (35424); The first five person shuttle crew and first woman crew member greet the news media. Members are, left to right, Crippen, Hauck, Ride, Fabian and Thagard (35425).

  6. The relationship between core stability and performance in division I football players.

    PubMed

    Nesser, Thomas W; Huxel, Kellie C; Tincher, Jeffrey L; Okada, Tomoko

    2008-11-01

    The purpose of this study was to identify relationships between core stability and various strength and power variables in strength and power athletes. National Collegiate Athletic Association Division I football players (height 184.0 +/- 7.1 cm, weight 100.5 +/- 22.4 kg) completed strength and performance testing before off-season conditioning. Subjects were tested on three strength variables (one-repetition maximum [1RM] bench press, 1RM squat, and 1RM power clean), four performance variables (countermovement vertical jump [CMJ], 20- and 40-yd sprints, and a 10-yd shuttle run), and core stability (back extension, trunk flexion, and left and right bridge). Significant correlations were identified between total core strength and 20-yd sprint (r = -0.594), 40-yd sprint (r = -0.604), shuttle run (r = -0.551), CMJ (r = 0.591), power clean/body weight (BW) (r = 0.622), 1RM squat (r = -0.470), bench press/BW (r = 0.369), and combined 1RM/BW (r = 0.447); trunk flexion and 20-yd sprint (r = -0.485), 40-yd sprint (r = -0.479), shuttle run (r = -0.443), CMJ (r = 0.436), power clean/BW (r = 0.396), and 1RM squat (r = -0.416); back extension and CMJ (r = 0.536), and power clean/BW (r = 0.449); right bridge and 20-yd sprint r = -0.410) and 40-yd sprint (r = -0.435), CMJ (r = 0.403), power clean/BW (r = 0.519) and bench press/BW (r = 0.372) and combined 1RM/BW (r = 0.406); and left bridge and 20-yd sprint (r = -0.376) and 40-yd sprint (r = -0.397), shuttle run (r = -0.374), and power clean/BW (r = 0.460). The results of this study suggest that core stability is moderately related to strength and performance. Thus, increases in core strength are not going to contribute significantly to strength and power and should not be the focus of strength and conditioning. PMID:18978631

  7. Effects of 4-Week Training Intervention with Unknown Loads on Power Output Performance and Throwing Velocity in Junior Team Handball Players

    PubMed Central

    Sabido, Rafael; Hernández-Davó, Jose Luis; Botella, Javier; Moya, Manuel

    2016-01-01

    Purpose To compare the effect of 4-week unknown vs known loads strength training intervention on power output performance and throwing velocity in junior team handball players. Methods Twenty-eight junior team-handball players (17.2 ± 0.6 years, 1.79 ± 0.07 m, 75.6 ± 9.4 kg)were divided into two groups (unknown loads: UL; known loads: KL). Both groups performed two sessions weekly consisting of four sets of six repetitions of the bench press throw exercise, using the 30%, 50% and 70% of subjects’ individual 1 repetition maximum (1RM). In each set, two repetitions with each load were performed, but the order of the loads was randomised. In the KL group, researchers told the subjects the load to mobilise prior each repetition, while in the UL group, researchers did not provide any information. Maximal dynamic strength (1RM bench press), power output (with 30, 50 and 70% of 1RM) and throwing velocity (7 m standing throw and 9 m jumping throw) were assessed pre- and post-training intervention. Results Both UL and KL group improved similarly their 1RM bench press as well as mean and peak power with all loads. There were significant improvements in power developed in all the early time intervals measured (150 ms) with the three loads (30, 50, 70% 1RM) in the UL group, while KL only improved with 30% 1RM (all the time intervals) and with 70% 1RM (at certain time intervals). Only the UL group improved throwing velocity in both standing (4.7%) and jumping (5.3%) throw (p > 0.05). Conclusions The use of unknown loads has led to greater gains in power output in the early time intervals as well as to increases in throwing velocity compared with known loads. Therefore unknown loads are of significant practical use to increase both strength and in-field performance in a short period of training. PMID:27310598

  8. Comparative Performance of Rear Facing Child Restraint Systems on the CMVSS 213 Bench and Vehicle Seats

    PubMed Central

    Tylko, Suzanne; Locey, Caitlin M.; Garcia-Espana, J. Felipe; Arbogast, Kristy B.; Maltese, Matthew R.

    2013-01-01

    The purpose of this study was to compare the dynamic response of rear-facing child restraint systems (RFCRS) installed on the CMVSS 213 sled bench and a selection of vehicle seats. Thirty-six sled tests were conducted: three models of rear facing CRS with an anthropomorphic test device (ATD) representing a 12 month old child (CRABI) were affixed via lower anchors (LATCH), 3 point belt without CRS base, and 3 point belt with CRS base to one of three vehicle seats or the CMVSS 213 bench seat. All CRS were subjected to an identical sled acceleration pulse. Two types of matched pair analysis: “bench-to-vehicle” and “method of attachment” were conducted. Statistically significant differences were observed in the kinematic responses of the ATD and the CRS. This is the first study to quantify differences between the regulatory bench and vehicle seats on a system level and evaluate the influence of attachment method. Our results show that the difference in RFCRS forward excursion between 3-point belt with base and LATCH installations was between 1 and 7 percent on the bench and 22 to 76 percent on the vehicle seats. When evaluating the dynamic performance of RFCRS, the use of real vehicle seats from vehicles that commonly carry children may provide valuable insight. The findings would require further confirmation using a broader selection of RFCRS and vehicle seats, before generalizable conclusions can be drawn. PMID:24406967

  9. Exercise Bouts at Three Different Intensities Fail to Potentiate Concentric Power

    PubMed Central

    CABRERA, CHAD A.; MORALES, JACOBO; GREER, FELICIA; PETTITT, ROBERT W.

    2009-01-01

    Postactivation potentiation (PAP) has been hypothesized previously to occur during voluntary, concentric actions. We tested the hypothesis that one of at least three different intensities of conditioning exercises would evoke potentiation of power during the concentric, bench press throw (BPT). Twelve men (age = 22.9 ± 2.7 years, bench press 1 repetition maximum (1RM) = 1.20 ± 0.12 kg·kg−1 body weight) completed five isotonic conditioning presses at ~55, 70, and 86% 1RM, in counterbalanced order, and on separate days. Average and peak power of the BPT using a load of 55% 1RM along with surface electromyography (EMG) of the triceps brachii were collected prior to and 4-minutes following each conditioning bout. Both average and peak power and EMG values (mean ± SD), respectively, were evaluated using two-way analyses of variance with repeated measures. Significant main effect decreases (p < 0.05) in average (−18.6 ± 4.9 W) and peak power (−37.4 ± 9.9 W) occurred across the three different intensities evaluated. No main effects or interactions were observed with the EMG data. Contrary to the previously reported hypothesis, we were unable to demonstrate that conditioning exercise, with three different intensities, can evoke potentiation of power using a load equating to that which is optimum for power production. PMID:27182310

  10. The Multianvil Press Research Facility at GSECARS

    NASA Astrophysics Data System (ADS)

    Wang, Y.; Uchida, T.; Rivers, M. L.; Sutton, S. R.; Weidner, D. J.; Durham, W. B.

    2002-12-01

    The multianvil press high pressure synchrotron research facility at the GSECARS beamlines consists of two large-volume presses (LVP): a 2.5 MN (250 ton) system at the bending magnet beamline (13-BM-D) and a 10 MN system at the insertion device beamline (13-ID-D). Both systems are now fully operational, with steadily increasing annual usage from ~70 days in 1998 to ~120 days in 2001. Here we present a system overview with brief scientific highlights illustrating the breadth of research and achievements made using this facility. Construction and operation of the facility are supported by the NSF Geosciences Instrumentation and Facilities Program. A DIA-type cubic-anvil apparatus and a split-cylinder apparatus (T-Cup) with 10 mm WC cubes are used to generate pressures and temperatures up to 24 GPa and 2400 K, on millimeter-sized samples, at 13-BM-D. In 13-ID-D, a large T-Cup apparatus with 25 mm anvils is used to reach pressure and temperature conditions of 25 GPa and 2500K simultaneously. Both high-pressure apparatus are mounted in die-sets, which can be easily transported in and out of the hydraulic press. Therefore all pressure generating apparatus can be used at any beamline, depending on research needs. A new deformation DIA (DDIA) was commissioned in August, 2002. This apparatus is capable of generating 30% strain on a 1 mm sample at pressures to ~15 GPa, allowing quantitative triaxial deformation experiments. Close to 400 runs have been carried out at our facility in a wide range of research areas: (1) P-V-T equation of state measurements on important mantle minerals, Fe alloys, and pressure standards, (2) in situ determination of phase relations of silicates, Fe alloys, and semiconductors using X-ray diffraction, (3) falling sphere measurements using radiography to determine viscosity of the silicate and metallic melts, (4) ultrasonic velocity measurements on mantle minerals, especially non-quenchable high pressure phases (e.g., high-pressure clinoenstatite

  11. 30. BUILDING NO. 527, DEHYDRATING PRESSES, LOOKING SOUTH. ALUMINUM NARROWGUAGE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. BUILDING NO. 527, DEHYDRATING PRESSES, LOOKING SOUTH. ALUMINUM NARROW-GUAGE GONDOLA CAR IN LEFT BACKGROUND BROUGHT MOISTENED GUN COTTON FROM REST HOUSE (BUILDING NO. 320-B) IN CANS. (ONE OF THESE CANS IS ON UNLOADING PLATFORM RUNNING BESIDE PRESSES). CONTENTS OF CANS WERE UNLOADED INTO PRESSES BY HAND. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  12. Validation and Reliability of a Novel Test of Upper Body Isometric Strength

    PubMed Central

    Bellar, David; Marcus, Lena; Judge, Lawrence W.

    2015-01-01

    The purpose of the present investigation was to examine the association of a novel test of upper body isometric strength against a 1RM bench press measurement. Forty college age adults (n = 20 female, n = 20 male; age 22.8 ± 2.8 years; body height 171.6 ± 10.8 cm; body mass 73.5 ± 16.3 kg; body fat 23.1 ± 5.4%) volunteered for the present investigation. The participants reported to the lab on three occasions. The first visit included anthropometric measurements and familiarization with both the upper body isometric test and bench press exercise. The final visits were conducted in a randomized order, with one being a 1RM assessment on the bench press and the other consisting of three trials of the upper body isometric assessment. For the isometric test, participants were positioned in a “push-up” style position while tethered (stainless steel chain) to a load cell (high frequency) anchored to the ground. The peak isometric force was consistent across all three trials (ICC = 0.98) suggesting good reliability. Multiple regression analysis was completed with the predictors: peak isometric force, gender, against the outcome variable 1RM bench press. The analysis resulted in a significant model (r2 = 0.861, p≤0.001) with all predictor variables attaining significance in the model (p<0.05). Isometric peak strength had the greatest effect on the model (Beta = 5.19, p≤0.001). Results from this study suggest that the described isometric upper body strength assessment is likely a valid and reliable tool to determine strength. Further research is warranted to gather a larger pool of data in regard to this assessment. PMID:26557203

  13. Hot Isostatic Pressing of 60-Nitinol

    NASA Technical Reports Server (NTRS)

    Stanford, Malcolm K.

    2015-01-01

    The effects of varying the time, temperature and pressure during consolidation of 60-Nitinol (Nickel Titanium alloy) by hot isostatic pressing (HIP) were examined. Six HIP cycles with a cycle time of either 2 or 20 hours, temperature of 900 or 1000 degrees Centigrade, and a chamber pressure of either 100 or 200 millipascals were used. The cycle representing the shortest cycle time at the highest temperature and pressure (2 hours/1000 degrees Centigrade/200 millipascals) produced material with the highest hardness (720 Vickers Pyramid Number (HV)). A modest increase in average grain size and significant porosity reduction were observed in material subjected to the longest cycle time at the highest temperature, regardless of the pressure applied. The intent of this study is to facilitate the technology transfer involved in the processing of this material.

  14. STS-114: Discovery Launch Postponement Press Briefing

    NASA Technical Reports Server (NTRS)

    2005-01-01

    This press briefing addresses the problem that occurred prior to the launch of the STS-114. Dean Acosta, Deputy Assistant Administrator of Public Affairs, introduces the panel which consists of Dr. Michael Griffin, NASA Administrator, William Readdy, Associate Administrator for Space Operations, Wayne Hale, Space Shuttle Program Deputy Manager, Steve Poulas, Orbiter Project Manager, Mike Leinbach, NASA Launch Director, and Bill Parsons, Space Shuttle Program Manager. Wayne Hale expresses that a problem occurred with one of the low level sensors in the hydrogen tank and that the cause of the problem must be identified and rectified. Steve Poulos talks about establishing a troubleshooting plan as a part of the scrub effort and Mike Leinbach describes the process of draining the external tank. Wayne Hale answers questions about the sensors and if the Space Shuttle Discovery is safe to fly and Steve Poulos answers questions about the possible suspects for this problem.

  15. STS-114: Post Launch Press Conference

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Dean Acosta, Deputy Assistant Administrator for Public Affairs hosted this post launch press conference. Present were Mike Griffin, NASA Administrator; William Ready, Associate Administrator for Space Operations; Bill Parsons, Space Shuttle Program Manager; Mike Leinbach, NASA Launch Director; and Wayne Hill, Deputy Program Manager for Space Shuttle Program. Each expressed thanks to all of NASA Officials and employees, contractors, vendors and the crew for their hard work the past two and a half years that resulted the successful and pristine launch of Space Shuttle Discovery. The Panel emphasized that through extensive technical analysis, thorough planning and tremendous amount of public support brought them full circle again to return to flight. Flight safety, debris during rocket separation, sensors, observations from the mission control, launch conditions were some of the topics discussed with the News media.

  16. STS-103 Discovery Launch Scrub Press Conference

    NASA Technical Reports Server (NTRS)

    1999-01-01

    A press conference held on December 16, 1999, to explain the reason behind NASA's decision to delay the Discovery's launching by a period of 24 hrs is presented. According to Ron Dittemore, Space Shuttle Program Manager, the STS-103 team delayed the launch because they need extra time to check one vendor's manufacturing processes, after an x-ray inspection revealed that an improper weld rod was used to weld one of the pressuring lines (called NPS lines) in the ET (external tank). Mr. Dittemore explained that since it is in the ET (not a major load carrying structure and rebuild after each flight), it did not pose any danger to the STS-103 flight. However, the same vendor also manufactured some parts of the orbiter and the team wanted to make sure that the quality of the vendor's manufacturing processes is robust before launching the orbiter to space. He also answered some reporters' questions.

  17. Publishing Outside the Box: Popular Press Books.

    PubMed

    Vyse, Stuart

    2014-10-01

    Writing and publishing popular press books requires a set of skills, not natural to basic and applied researchers trained to publish in peer-referred behavior analytic journals or to practice behavior analysis in applied settings. This article provides suggestions and examples. These include finding a distinctive idea, securing a contract, hiring an agent (or not), deciding on a publisher, and writing engagingly for a broad audience. The last is the greatest challenge. Among my recommendations are to read good prose, good models, and good books about publishing; talk to experienced colleagues; read aloud to judge the appropriateness of your vocabulary and style; and interject humor, imagery, and drama. Book publishing is a long and difficult process, but it is possible. It has a great potential for bringing behavior analytic research, practice and theory to the attention of the general public. PMID:27274959

  18. A comparative study between spiral-filter press and belt press implemented in a cloudy apple juice production process.

    PubMed

    De Paepe, Domien; Coudijzer, Katleen; Noten, Bart; Valkenborg, Dirk; Servaes, Kelly; De Loose, Marc; Diels, Ludo; Voorspoels, Stefan; Van Droogenbroeck, Bart

    2015-04-15

    In this study, advantages and disadvantages of the innovative, low-oxygen spiral-filter press system were studied in comparison with the belt press, commonly applied in small and medium size enterprises for the production of cloudy apple juice. On the basis of equivalent throughput, a higher juice yield could be achieved with spiral-filter press. Also a more turbid juice with a higher content of suspended solids could be produced. The avoidance of enzymatic browning during juice extraction led to an attractive yellowish juice with an elevated phenolic content. Moreover, it was found that juice produced with spiral-filter press demonstrates a higher retention of phenolic compounds during the downstream processing steps and storage. The results demonstrates the advantage of the use of a spiral-filter press in comparison with belt press in the production of a high quality cloudy apple juice rich in phenolic compounds, without the use of oxidation inhibiting additives. PMID:25466116

  19. Hot-bench simulation of the active flexible wing wind-tunnel model

    NASA Technical Reports Server (NTRS)

    Buttrill, Carey S.; Houck, Jacob A.

    1990-01-01

    Two simulations, one batch and one real-time, of an aeroelastically-scaled wind-tunnel model were developed. The wind-tunnel model was a full-span, free-to-roll model of an advanced fighter concept. The batch simulation was used to generate and verify the real-time simulation and to test candidate control laws prior to implementation. The real-time simulation supported hot-bench testing of a digital controller, which was developed to actively control the elastic deformation of the wind-tunnel model. Time scaling was required for hot-bench testing. The wind-tunnel model, the mathematical models for the simulations, the techniques employed to reduce the hot-bench time-scale factors, and the verification procedures are described.

  20. DIRECT LIQUEFACTION PROOF-OF-CONCEPT PROGRAM - BENCH RUN PB-10 (HTI 227-109)

    SciTech Connect

    Unknown

    1999-12-30

    This report presents the results of the bench-scale test, PB-10, performed at HTI's facilities under DOE contract (HTI Run No. 227-109). This bench test continues the work that was started in PDU testing 260-007. Previous bench test (PB-09, HTI 227-106) was performed on different seams of Chinese coal (Shenhua Ningtiaota Coal No.2 and No.3). Since another coal, Shangwan coal was selected for the liquefaction plant, PB-10 was made as approved by DOE/COR. The objective of this test was to evaluate the liquefaction performance of Shangwan coal utilizing various backend processing and recycle schemes. Additionally, this test was to collect available process data to allow for the best scale-up process design possible from this particular unit.

  1. Bench-scale treatability studies for simulated incinerator scrubber blowdown containing radioactive cesium and strontium

    SciTech Connect

    Coroneos, A.C.; Taylor, P.A.; Arnold, W.D. Jr.; Bostick, D.A.; Perona, J.J.

    1994-12-01

    The purpose of this report is to document the results of bench-scale testing completed to remove {sup 137}Cs and {sup 90}Sr from the Oak Ridge K-25 Site Toxic Substances Control Act (TSCA) Incinerator blowdown at the K-25 Site Central Neutralization Facility, a wastewater treatment facility designed to remove heavy metals and uranium from various wastewaters. The report presents results of bench-scale testing using chabazite and clinoptilolite zeolites to remove cesium and strontium; using potassium cobalt ferrocyanide (KCCF) to remove cesium; and using strontium chloride coprecipitation, sodium phosphate coprecipitation, and calcium sulfate coprecipitation to remove strontium. Low-range, average-range, and high-range concentration blowdown surrogates were used to complete the bench-scale testing.

  2. Direct liquefaction proof-of-concept program. Finaltopical report, Bench Run 4 (227-95)

    SciTech Connect

    Comolli, A.G.; Pradhan, V.R.; Lee, T.L.K.

    1997-03-01

    This report presents the results of bench-scale work, Bench Run PB-04, conducted under the DOE Proof of Concept-Bench Option Program in direct coal liquefaction at Hydrocarbon Technologies, Inc. in Lawrenceville, New Jersey. The Bench Run PB-04 was the fifth of the nine runs planned in the POC Bench Option Contract between the U.S. DOE and Hydrocarbon Technologies, Inc. Bench Run PB-04 had multiple goals. These included the evaluation of the effects of dispersed slurry catalyst system on the performance of direct liquefaction of a subbituminous Wyoming Black Thunder mine coal under extinction recycle (454{degrees}C+ recycle) condition; another goal was to investigate the effects of the combined processing of automobile shredder residue (auto-fluff) with coal and other organic waste materials. PB-04 employed a two-stage, back-mixed, slurry reactor system with an interstage V/L separator and an in-line fixed-bed hydrotreater. The HTI`s newly modified P/Fe catalyst was very effective for direct liquefaction and coprocessing of Black Thunder mine subbituminous coal with Hondo resid and auto-fluff; during `coal-only` liquefaction mode, over 93% maf coal conversion was obtained with about 90% residuum conversion and as high as 67% light distillate (C{sub 4}-975 F) yield, while during `coprocessing` mode of operation, distillate yields varied between 58 and 69%; the residuum conversions varied between 74 and 89% maf. Overall, it is concluded, based upon the yield data available from PB-04, that auto-effective as MSW plastics in improving coal hydroconversion process performance. Auto-fluff did not increase light distillate yields nor decrease light gas make and chemical hydrogen consumption in coal liquefaction, as was observed to occur with MSW plastics.

  3. Bench-scale Kinetics Study of Mercury Reactions in FGD Liquors

    SciTech Connect

    Gary Blythe; John Currie; David DeBerry

    2008-03-31

    This document is the final report for Cooperative Agreement DE-FC26-04NT42314, 'Kinetics Study of Mercury Reactions in FGD Liquors'. The project was co-funded by the U.S. DOE National Energy Technology Laboratory and EPRI. The objective of the project has been to determine the mechanisms and kinetics of the aqueous reactions of mercury absorbed by wet flue gas desulfurization (FGD) systems, and develop a kinetics model to predict mercury reactions in wet FGD systems. The model may be used to determine optimum wet FGD design and operating conditions to maximize mercury capture in wet FGD systems. Initially, a series of bench-top, liquid-phase reactor tests were conducted and mercury species concentrations were measured by UV/visible light spectroscopy to determine reactant and byproduct concentrations over time. Other measurement methods, such as atomic absorption, were used to measure concentrations of vapor-phase elemental mercury, that cannot be measured by UV/visible light spectroscopy. Next, a series of bench-scale wet FGD simulation tests were conducted. Because of the significant effects of sulfite concentration on mercury re-emission rates, new methods were developed for operating and controlling the bench-scale FGD experiments. Approximately 140 bench-scale wet FGD tests were conducted and several unusual and pertinent effects of process chemistry on mercury re-emissions were identified and characterized. These data have been used to develop an empirically adjusted, theoretically based kinetics model to predict mercury species reactions in wet FGD systems. The model has been verified in tests conducted with the bench-scale wet FGD system, where both gas-phase and liquid-phase mercury concentrations were measured to determine if the model accurately predicts the tendency for mercury re-emissions. This report presents and discusses results from the initial laboratory kinetics measurements, the bench-scale wet FGD tests, and the kinetics modeling efforts.

  4. Bench and Riser Soil Water Content on Semiarid Hillslopes with Terracettes

    NASA Astrophysics Data System (ADS)

    Heinse, R.; Corrao, M.; Eitel, J.; Link, T. E.

    2015-12-01

    Microtopographic features known as terracettes are found throughout many semiarid rangelands. These path-like features roughly perpendicular to the slope are frequently traversed by grazing animals on steep hillslopes. The soil properties and hydrologic function, however, are virtually unknown. This research aimed to identify differences in soil properties between terracette bench and riser features, and their influence on soil water content for two terracetted sites and two non-terracetted control sites (grazed and ungrazed) in Eastern Washington State. Measurements of volumetric water content (θ_v), bulk density, soil texture, saturated hydraulic conductivity, pH, and ECa_a were collected along with compaction, vegetative cover and cattle density throughout the 2013 and 2014 field seasons. Results show small but significant volumetric water content differences between terracette benches and risers in the upper 10 cm with benches exhibiting higher mean θ_v than risers throughout the year. Soil bulk density on benches (1600 kg m-3^{-3}) was significantly higher than that of risers (1300 kg m-3^{-3}) with no differences in soil texture. The saturated hydraulic conductivity on benches was roughly half of that for risers. No significant soil differences were noted below 20 cm depth. Terracetted sites showed greater field-averaged θ_v compared to non-terracetted sites suggesting a positive trend with animal stocking rates. Higher water content on terracette benches is attributed to shifts in pore size distribution with compaction, and a reduction in root-water uptake due to plant-root impedance. This increased soil water does not however increase forage production as it is not accessible to plants.

  5. A computer test bench for checking and adjusting the automatic regulators of generator excitation systems

    SciTech Connect

    Dovganyuk, I. Ya.; Labunets, I. A.; Plotnikova, T. V.; Sokur, P. V.

    2008-05-15

    A computer test bench for testing and debugging natural samples of the automatic excitation regulation systems of generators, the protection units and the power part of the excitation system is described. The bench includes a personal computer with specialized input-output circuit boards for analog and digital signals, and enables the time and cost involved in developing and checking control systems to be reduced considerably. The program employed operates in real time and enables the automatic excitation regulators of synchronous generators and generators with longitudinal-transverse excitation in a specific power system to be adjusted.

  6. Test bench HEATREC for heat loss measurement on solar receiver tubes

    NASA Astrophysics Data System (ADS)

    Márquez, José M.; López-Martín, Rafael; Valenzuela, Loreto; Zarza, Eduardo

    2016-05-01

    In Solar Thermal Electricity (STE) plants the thermal energy of solar radiation is absorbed by solar receiver tubes (HCEs) and it is transferred to a heat transfer fluid. Therefore, heat losses of receiver tubes have a direct influence on STE plants efficiency. A new test bench called HEATREC has been developed by Plataforma Solar de Almería (PSA) in order to determinate the heat losses of receiver tubes under laboratory conditions. The innovation of this test bench consists in the possibility to determine heat losses under controlled vacuum.

  7. Letting The Nasa Press Engine Work For You

    NASA Astrophysics Data System (ADS)

    Weaver, Kimberly A.

    2006-09-01

    You have an amazing result based on NASA data or a NASA mission, you have written your seminal paper and submitted it to your favorite journal. You believe it has press potential and maybe you've even gotten help from your PR folks in writing a press release. Now you would really like NASA to issue this as a press release. But how do you do that? This presentation will illustrate the steps required to engage NASA in helping promote your story. What are NASA's requirements for newsworthiness? Should your news be released as a web feature story or in the local media? Does your news rise to the level of a full-blown press conference or will it be a media teleconference? How do you obtain approval for a NASA press event? Once your result is scheduled to be issued as a press release, how can you improve your chances of getting the best possible coverage for your story? I will discuss the NASA press process and suggest how to consider factors like timing, working with your collaborating institutions in an efficient way, and not letting the cat out of the bag until the press event.

  8. 6. Interior, first floor front room. View of pressed metal ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Interior, first floor front room. View of pressed metal ceiling visible through opening in dropped ceiling. (Below the pressed metal ceiling are three wooden joists, two electrical wires and the edges of the dropped ceiling where a panel had been removed). - Ferree Building, 417 Ninth Street, Northwest, Washington, District of Columbia, DC

  9. New Realities for Scholarly Presses in Trying Economic Times

    ERIC Educational Resources Information Center

    Blakesley, David

    2014-01-01

    The author explains that Parlor Press is an independent publisher and distributor of scholarly and trade books in print and digital formats. It was founded in 2002 to address the need for an alternative scholarly, academic press attentive to emergent ideas and forms while maintaining the highest possible standards of quality, credibility, and…

  10. Westview Press: Small Is Beautiful--and Profitable.

    ERIC Educational Resources Information Center

    Evans, Nancy

    1979-01-01

    Westview Press in Boulder, Colorado, is a small independent press with an interest in scholarly publishing, especially manuscripts concerned with international and public policy. High speed and low cost are the advantages of its no-frills production method. A description of its operation and guidelines for authors are presented. (JMD)

  11. First Amendment Speech and Press Theory: Preferred Position Postulate Reexamined.

    ERIC Educational Resources Information Center

    Stonecipher, Harry W.

    If the United States Supreme Court is to exercise its historic role as guardian of the fundamental freedoms flowing from the speech and press clauses of the first amendment, it is imperative that those basic freedoms be placed in a preferred position. The preferred position doctrine provides adequate safeguards for both speech and press guarantees…

  12. 7. VIEW OF HYDRAULIC HAMMER STAMPING PRESS ON SIDE A ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. VIEW OF HYDRAULIC HAMMER STAMPING PRESS ON SIDE A OF BUILDING 883. THIS TYPE OF PRESS WAS USED FOR BOTH STAINLESS STEEL AND FOR DEPLETED URANIUM. (7/2/86) - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  13. 29 CFR 1910.217 - Mechanical power presses.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 5 2011-07-01 2011-07-01 false Mechanical power presses. 1910.217 Section 1910.217 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Machinery and Machine Guarding § 1910.217 Mechanical power presses. (a) General requirements....

  14. Korean and Japanese Press: A Study in Crisis.

    ERIC Educational Resources Information Center

    Ruidl, Richard A.

    During a time of crisis, it is instructive to examine the national press of Japan and Korea, two economic allies that view each other with suspicion. The Japanese press is relatively free and liberal-oriented on the domestic scene but is closely aligned with big business and government with regard to international concerns. The South Korean…

  15. Press Conference with Elliot L. Richardson, Secretary of HEW.

    ERIC Educational Resources Information Center

    Department of Health, Education, and Welfare, Washington, DC.

    Two documents were released to the press on January 18, 1973, by Secretary Richardson, one summarizing his term of office as Secretary of Health, Education, and Welfare, and one reporting on HEW potential for the seventies (SO 005 666, SO 005 699). In an introductory statement prior to the press conference, the question of whether or not we as a…

  16. Criticism of the Press: Its Social, Psychological and Political Origins.

    ERIC Educational Resources Information Center

    Becker, Lee B.; And Others

    This study examines data from several national polls about press coverage during the Watergate scandal, in order to assess the origins of press criticism. The polls were conducted between 28 September and 6 October 1973, during June 1974, and in August 1974. The data suggest that political variables--particularly support of Nixon, party…

  17. 6. VIEW OF THE BRIQUETTING PRESS AND CHIP CLEANING HOOD. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW OF THE BRIQUETTING PRESS AND CHIP CLEANING HOOD. SCRAPS OF ENRICHED URANIUM FROM MACHINING OPERATIONS WERE CLEANED IN A SOLVENT BATH, THEN PRESSED INTO BRIQUETTS. THE BRIQUETTS WERE USED AS FEED MATERIAL FOR THE FOUNDRY. (4/4/66) - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

  18. 9. DETAILED VIEW OF BRIQUETTING PRESS HOUSED IN A GLOVE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. DETAILED VIEW OF BRIQUETTING PRESS HOUSED IN A GLOVE BOX. THE PRESS FORMED SCRAP PLUTONIUM METAL FROM FOUNDRY AND FABRICATION PROCESSES INTO SMALL BRIQUETTES. THESE BRIQUETTES BECAME PART OF THE FEED MATERIALS FOR THE FOUNDRY. (5/6/59) - Rocky Flats Plant, Plutonium Fabrication, Central section of Plant, Golden, Jefferson County, CO

  19. 10. VIEW OF MODULE B, INSTALLATION OF A HYDRAULIC PRESS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. VIEW OF MODULE B, INSTALLATION OF A HYDRAULIC PRESS. THE PRESS WILL EVENTUALLY BE CONNECTED TO A GLOVE BOX LINE. (9/29/69) - Rocky Flats Plant, Plutonium Manufacturing Facility, North-central section of Plant, just south of Building 776/777, Golden, Jefferson County, CO

  20. Comparison of ceramic waste forms produced by hot uniaxial pressing and by cold pressing and sintering

    SciTech Connect

    Oversby, V.M.; Vance, E.R.

    1994-09-01

    Synroc C waste form specimens prepared using the Australian-developed technology are uniaxially pressed in stainless steel bellows at 1200{degrees}C and 20MPa. This produces a material with high chemical and physical durability and with the radioactivity enclosed inside both the waste form and the bellows. An alternative method of producing the ceramic product is to use cold pressing of pellets followed by reactive sintering to provide densification and mineralization. Depending on the scale of waste form preparation required and on the activity level and nature of the waste streams, the cold press and sinter method may have advantages. To evaluate the effects of production method on waste form characteristics, especially resistance to dissolution or leaching of waste elements, we have prepared two simulated waste samples for evaluation. Both samples were prepared from liquid precursor materials (alkoxides, nitrates, and colloidal silica) and then doped with waste elements. The precursor material in each case corresponded to a basic phase assemblage of 60% zirconolite, 15% nepheline, 10% spinel, 10% perovskite, and 5% rutile. One sample was doped with 25% by weight of U; the other with 10% by weight each of U and Gd. Each sample was calcined at 750{degrees}C for 1 hr. in a 3.5% H{sub 2} in N{sub 2} atmosphere. Then one portion of each sample was hot pressed at temperatures ranging from 1120 to 1250{degrees}C and 20MPa pressure in steel bellows. A separate portion of each sample was formed into pellets, cold pressed, and sintered in various atmospheres at 1200{degrees}C to produce final products about 2/3 cm in diameter. Samples were then examined to determine density of the product, grain sizes of the phases, phase assemblage, and the location of the U and Gd in the final phases. Density data indicate that sintering gives good results provided that the samples are held at 200{degrees}C for long enough to allow trapped gases to escape.

  1. Modeling of planetesimal compaction by hot pressing

    NASA Astrophysics Data System (ADS)

    Neumann, W.; Breuer, D.; Spohn, T.

    2014-07-01

    Compaction of initially porous material prior to melting is an important process that has influenced the interior structure and the thermal evolution of planetesimals in their early history. On one hand, compaction decreases the porosity resulting in a reduction of the radius. On the other hand, the loss of porosity results in an increase of the thermal conductivity of the material and, thus, in a more efficient cooling. Porosity loss by hot pressing is the most efficient process of compaction in planetesimals and can be described by creep flow, which depends on temperature and stress. Hot pressing has been repeatedly modeled using a simplified approach, for which the porosity is gradually reduced in some fixed temperature interval between ~650 K and 700 K [see e.g. 1--3]. This approach neglects the dependence of compaction on stress. In the present study [see 4], we compare this ''parametrized'' method with a self-consistent calculation of porosity loss via a ''creep-related'' approach. We use our thermal evolution model from previous studies [5] to model compaction of an initially porous ordinary chondritic body and consider four basic packings of spherical dust grains (simple cubic, orthorhombic, rhombohedral, and body-centered cubic). Depending on the grain packing, we calculate the effective stress and the associated porosity change via the thermally activated creep flow. For comparison, compaction is also modeled by simply reducing the initial porosity linearly to zero between 650 and 700 K. Since we are interested in thermal metamorphism and not melting, we only consider bodies that experience a maximum temperature below the solidus temperature of the metal phase. For the creep related approach, the temperature interval in which compaction takes place depends strongly on the size of the planetesimal and is not fixed as assumed in the parametrized approach. Depending on the radius, the initial grain size, the activation energy, the initial porosity, and the

  2. Parallelization of Rocket Engine Simulator Software (PRESS)

    NASA Technical Reports Server (NTRS)

    Cezzar, Ruknet

    1997-01-01

    Parallelization of Rocket Engine System Software (PRESS) project is part of a collaborative effort with Southern University at Baton Rouge (SUBR), University of West Florida (UWF), and Jackson State University (JSU). The second-year funding, which supports two graduate students enrolled in our new Master's program in Computer Science at Hampton University and the principal investigator, have been obtained for the period from October 19, 1996 through October 18, 1997. The key part of the interim report was new directions for the second year funding. This came about from discussions during Rocket Engine Numeric Simulator (RENS) project meeting in Pensacola on January 17-18, 1997. At that time, a software agreement between Hampton University and NASA Lewis Research Center had already been concluded. That agreement concerns off-NASA-site experimentation with PUMPDES/TURBDES software. Before this agreement, during the first year of the project, another large-scale FORTRAN-based software, Two-Dimensional Kinetics (TDK), was being used for translation to an object-oriented language and parallelization experiments. However, that package proved to be too complex and lacking sufficient documentation for effective translation effort to the object-oriented C + + source code. The focus, this time with better documented and more manageable PUMPDES/TURBDES package, was still on translation to C + + with design improvements. At the RENS Meeting, however, the new impetus for the RENS projects in general, and PRESS in particular, has shifted in two important ways. One was closer alignment with the work on Numerical Propulsion System Simulator (NPSS) through cooperation and collaboration with LERC ACLU organization. The other was to see whether and how NASA's various rocket design software can be run over local and intra nets without any radical efforts for redesign and translation into object-oriented source code. There were also suggestions that the Fortran based code be

  3. EVALUATION OF A BENCH-SCALE DRY FLUE GAS DESULFURIZATION SYSTEM FOR SCREENING POTENTIAL REAGENTS AND OPERATING CONDITIONS

    EPA Science Inventory

    The paper discusses two series of bench-scale dry flue gas desulfurization (FGD) laboratory tests, the primary objective of which was to evaluate the ability of a bench-scale dry FGD system to screen potential reagents and operating conditions in support of testing at larger pilo...

  4. T and D-Bench--Innovative Combined Support for Education and Research in Computer Architecture and Embedded Systems

    ERIC Educational Resources Information Center

    Soares, S. N.; Wagner, F. R.

    2011-01-01

    Teaching and Design Workbench (T&D-Bench) is a framework aimed at education and research in the areas of computer architecture and embedded systems. It includes a set of features not found in other educational environments. This set of features is the result of an original combination of design requirements for T&D-Bench: that the framework should…

  5. 42 CFR 84.1153 - Dust, fume, mist, and smoke tests; canister bench tests; gas masks canisters containing filters...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Dust, fume, mist, and smoke tests; canister bench..., fume, mist, and smoke tests; canister bench tests; gas masks canisters containing filters; minimum requirements. (a) Gas mask canisters containing filters for protection against dusts, fumes, mists, and...

  6. 42 CFR 84.1153 - Dust, fume, mist, and smoke tests; canister bench tests; gas masks canisters containing filters...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Dust, fume, mist, and smoke tests; canister bench..., fume, mist, and smoke tests; canister bench tests; gas masks canisters containing filters; minimum requirements. (a) Gas mask canisters containing filters for protection against dusts, fumes, mists, and...

  7. 42 CFR 84.1153 - Dust, fume, mist, and smoke tests; canister bench tests; gas masks canisters containing filters...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Dust, fume, mist, and smoke tests; canister bench..., fume, mist, and smoke tests; canister bench tests; gas masks canisters containing filters; minimum requirements. (a) Gas mask canisters containing filters for protection against dusts, fumes, mists, and...

  8. 42 CFR 84.1153 - Dust, fume, mist, and smoke tests; canister bench tests; gas masks canisters containing filters...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Dust, fume, mist, and smoke tests; canister bench..., fume, mist, and smoke tests; canister bench tests; gas masks canisters containing filters; minimum requirements. (a) Gas mask canisters containing filters for protection against dusts, fumes, mists, and...

  9. Lifting shoeprints using gelatin lifters and a hydraulic press.

    PubMed

    Shor, Yaron; Tsach, Tsadok; Vinokurov, Asya; Glattstein, Baruch; Landau, Eliezer; Levin, Nadav

    2003-03-01

    A method for lifting two-dimensional dust footwear marks on rough or porous surfaces, such as cardboard or cloth, using a hydraulic press, was examined. It was found that exerting pressure on the lifter by the press usually improves the quality of the results. When the shoeprints were on rough or soft surfaces, the prints transferred to the gelatin lifters were better than those obtained by the conventional method. In other cases, using the press did not improve the results but was much simpler to apply. Based on the results of this study, the hydraulic press/gelatin lifter method (the "press method") is used at the authors' laboratory, depending on the surface from which the shoeprint is to be lifted. It is the authors' intention to apply the method to other surfaces after finding the optimal pressure for surfaces with loose fibers. PMID:12664996

  10. Speed-invariant, on-press color quality measurements

    SciTech Connect

    Simpson, M.L.; Bliss, R.F.; McMillan, D.E.; Nodine, R.N.; Goddard, J.S.

    1991-12-03

    Color measurement is an important aspect of quality control for graphic printing press operation. Normally, measurements of color quality are performed by sampling the product off-line, in which case feedback to press operators is not available in a timely manner. On-press measurement of color quality provides timely feedback to the press operators; however, maintaining the accuracy of the measurement in a dynamic setting is not trivial. In this paper, a colorimeter measurement system using commercially available equipment is described for making reliable, on-press color measurements. The system was demonstrated on a web test bed running loops of printed graphic images. Examples of commercially printed graphic material include product labels, packaging, stamps, and wall paper. Resulting color measurements were shown to be highly sensitive to variations in color-content while maintaining invariance to web speeds as high as 500 ft/min. 6 refs.

  11. The Effects of Multiple-Joint Isokinetic Resistance Training on Maximal Isokinetic and Dynamic Muscle Strength and Local Muscular Endurance

    PubMed Central

    Ratamess, Nicholas A.; Beller, Noah A.; Gonzalez, Adam M.; Spatz, Gregory E.; Hoffman, Jay R.; Ross, Ryan E.; Faigenbaum, Avery D.; Kang, Jie

    2016-01-01

    The transfer of training effects of multiple-joint isokinetic resistance training to dynamic exercise performance remain poorly understood. Thus, the purpose of the present study was to investigate the magnitude of isokinetic and dynamic one repetition-maximum (1RM) strength and local muscular endurance increases after 6 weeks of multiple-joint isokinetic resistance training. Seventeen women were randomly assigned to either an isokinetic resistance training group (IRT) or a non-exercising control group (CTL). The IRT group underwent 6 weeks of training (2 days per week) consisting of 5 sets of 6-10 repetitions at 75-85% of subjects’ peak strength for the isokinetic chest press and seated row exercises at an average linear velocity of 0.15 m s-1 [3-sec concentric (CON) and 3-sec eccentric (ECC) phases]. Peak CON and ECC force during the chest press and row, 1RM bench press and bent-over row, and maximum number of modified push-ups were assessed pre and post training. A 2 x 2 analysis of variance with repeated measures and Tukey’s post hoc tests were used for data analysis. The results showed that 1RM bench press (from 38.6 ± 6.7 to 43.0 ± 5.9 kg), 1RM bent-over row (from 40.4 ± 7.7 to 45.5 ± 7.5 kg), and the maximal number of modified push-ups (from 39.5 ± 13.6 to 55.3 ± 13.1 repetitions) increased significantly only in the IRT group. Peak isokinetic CON and ECC force in the chest press and row significantly increased in the IRT group. No differences were shown in the CTL group for any measure. These data indicate 6 weeks of multiple-joint isokinetic resistance training increases dynamic muscle strength and local muscular endurance performance in addition to specific isokinetic strength gains in women. Key points Multiple-joint isokinetic resistance training increases dynamic maximal muscular strength, local muscular endurance, and maximal isokinetic strength in women. Multiple-joint isokinetic resistance training increased 1RM strength in the bench press

  12. STS-46 post flight press conference

    NASA Astrophysics Data System (ADS)

    1992-08-01

    At a post flight press conference, the flight crew of the STS-46 mission (Cmdr. Loren Shriver, Pilot Andrew Allen, Mission Specialists Claude Nicollier (European Space Agency (ESA)), Marsha Ivins (Flight Engineer), Jeff Hoffman (Payload Commander), Franklin Chang-Dias, and Payload Specialist Franco Malerba (Italian Space Agency (ISA))) discussed their roles in and presented video footage, slides and still photographs of the different aspects of their mission. The primary objectives of the mission were the deployment of ESA's European Retrievable Carrier (EURECA) satellite and the joint NASA/ISA deployment and testing of the Tethered Satellite System (TSS). Secondary objectives included the IMAX Camera, the Limited Duration Space Environment Candidate Materials Exposure (LDVE), and the Pituitary Growth Hormone Cell Function (PHCF) experiments. Video footage of the EURECA and TSS deployment procedures are shown. Earth views were extensive and included Javanese volcanoes, Amazon basin forest ground fires, southern Mexico, southern Bolivian volcanoes, south-west Sudan and the Sahara Desert, and Melville Island, Australia. Questions from reporters and journalists from Johnson Space Center and Kennedy Space Center were discussed.

  13. [Work disability in public press professions].

    PubMed

    Akermann, S

    2002-09-01

    In this study more than 1,000 cases of long-term disability among members of the press and media were evaluated. Mental disorders were the main cause of disability in almost every fourth case. In women psychiatric illnesses were even more important. The most common diagnosis was that of a depressive disorder which accounted for more than half of all psychiatric cases. The causes of disability of other insurance systems such as the German social security scheme and the pension and disability plan for the medical profession were compared. Mental illnesses are the leading cause of disability in white collar workers and orthopaedic illnesses, especially disorders of the vertebral column, are the leading cause in blue collar workers, as one might have expected. In females mental disorders are even more common than in men whereas men tend to have more cardiovascular problems than women. In this study also some interesting features regarding disability caused by various illnesses after long-term follow-up were found. This opens unknown perspectives allowing new assessment of diseases and eventually will enable the actuary to price medical diagnoses for disability insurance. PMID:12242775

  14. Hot isostatic press waste option study report

    SciTech Connect

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065.

  15. STS-114: Discovery Post MMT Press Conference

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Bruce Buckingham of NASA Public Affairs hosted this press conference. Wayne Hill, Space Shuttle Deputy Program Manager; John Muratore, Shuttle Systems and Integration Manager; Mike Wetmore, Director for Shuttle Processing were present. Wayne started with a video from Shuttle Logistics Depot showing details of a point sensor box commonly named the black box. Work with the trouble shooting continues on a day to day basis, no definite launching date is set. John reports that they are in a mission support mode all over the country until the sensor problem is solved. Mike reports his team will complete scrub and securing tasks through the next day, restore the facility to its normal mode, and will start to a four day process of getting back to launch once trouble shooting is completed. Tanking test, thermal environment, problem identification, engine cut-off sensor problems, sensors, risk, design reviews, test and analysis, correlation of the problem with Columbia, are some of the topics covered with the News media.

  16. [Gender and health in the daily press].

    PubMed

    Revuelta, Gemma; Alonso, Inma; Tomás, Sonia; Guerrero, Marcela; Rohlfs, Izabella

    2004-05-01

    To have a better understanding on the role of the press in the communication of gender and health issues, the content of the five most spread newspapers in Spain was studied (El País, ABC, El Mundo, La Vanguardia and El Periódico de Catalunya) for five years (1997-2001) and the electronic version of The New York Times of the period 1990-1999. An unequal distribution was observed in the responsibility as for the information related to three aspects: positions of responsibility in the newspapers (out of 71 main posts, 67 were men and 4 women); the authors of the articles on health issues (61.2% men and 38,8% women, among the articles that include the author) and the mentioned information sources (81.43% men and 17.77% women). Among the 120 health issues that were covered during the period of the study, only 20 explicitly mentioned a woman (16.67%). Those subjects that included more frequently explicit references were: ablation, iatrogenics, sterilization, sexual and reproductive health, incontinence, beauty and domestic violence. The analysis of the approach to these subjects helped to identify the stereotypes of gender inequality, in the language as well as in the approach. PMID:15171880

  17. Changes in Maximal Strength, Velocity, and Power After 8 Weeks of Training With Pneumatic or Free Weight Resistance.

    PubMed

    Frost, David M; Bronson, Stefanie; Cronin, John B; Newton, Robert U

    2016-04-01

    Frost, DM, Bronson, S, Cronin, JB, and Newton, RU. Changes in maximal strength, velocity, and power after 8 weeks of training with pneumatic or free weight resistance. J Strength Cond Res 30(4): 934-944, 2016-Because free weight (FW) and pneumatic (PN) resistance are characterized by different inertial properties, training with either resistance could afford unique strength, velocity, and power adaptations. Eighteen resistance-trained men completed baseline tests to determine their FW and PN bench press 1 repetition maximum (1RM). During the FW session, 4 explosive repetitions were performed at loads of 15, 30, 45, 60, 75, and 90% 1RM to assess force, velocity, and power. Participants were then assigned to a FW or PN training group, which involved three 90-minute sessions per week for 8 weeks. Both intervention groups completed identical periodized programs with the exception of the resistance used to perform all bench press movements. Free weight participants significantly increased their FW and PN 1RM (10.4 and 9.4%), and maximum (any load) force (9.8%), velocity (11.6%), and power (22.5%). Pneumatic-trained participants also exhibited increases in FW and PN 1RM (11.6 and 17.5%), and maximum force (8.4%), velocity (13.6%), and power (33.4%). Both interventions improved peak barbell velocity at loads of 15 and 30% 1RM; however, only the PN-trained individuals displayed improvements in peak force and power at these same loads. Training with PN resistance may offer advantages if attempting to improve power at lighter relative loads by affording an opportunity to consistently achieve higher accelerations and velocities (F = ma), in comparison with FW. Exploiting the inertial properties of the resistance, whether mass, elastic or PN, could afford an opportunity to develop mixed-method training strategies and/or elicit unique neuromuscular adaptations to suit the specific needs of athletes from sports characterized by varying demands. PMID:26418368

  18. Elastic Bands as a Component of Periodized Resistance Training.

    PubMed

    Joy, Jordan M; Lowery, Ryan P; Oliveira de Souza, Eduardo; Wilson, Jacob M

    2016-08-01

    Joy, JM, Lowery, RP, Oliveira de Souza, E, and Wilson, JM. Elastic bands as a component of periodized resistance training. J Strength Cond Res 30(8): 2100-2106, 2016-Variable resistance training (VRT) has recently become a component of strength and conditioning programs. Prior research has demonstrated increases in power and/or strength using low loads of variable resistance. However, no study has examined using high loads of variable resistance as a part of a periodized training protocol to examine VRT within the context of a periodized training program and to examine a greater load of variable resistance than has been examined in prior research. Fourteen National Collegiate Athletic Association division II male basketball players were recruited for this study. Athletes were divided equally into either a variable resistance or control group. The variable resistance group added 30% of their 1 repetition maximum (1RM) as band tension to their prescribed weight 1 session per week. Rate of power development (RPD), peak power, strength, body composition, and vertical jump height were measured pretreatment and posttreatment. No baseline differences were observed between groups for any measurement of strength, power, or body composition. A significant group by time interaction was observed for RPD, in which RPD was greater in VRT posttraining than in the control group. Significant time effects were observed for all other variables including squat 1RM, bench press 1RM, deadlift 1RM, clean 3RM, vertical jump, and lean mass. Although there were no significant group ×-time interactions, the VRT group's percent changes and effect sizes indicate a larger treatment effect in the squat and bench press 1RM values and the vertical jump performed on the force plate and vertec. These results suggest that when using variable resistance as a component of a periodized training program, power and strength can be enhanced. Therefore, athletes who add variable resistance to 1 training

  19. The Watchdog in Nineteenth Century Libel Law: A Common Law Concept of Freedom of the Press.

    ERIC Educational Resources Information Center

    Gleason, Timothy W.

    In press law, the individual right of freedom of the press frequently is linked to a public interest or "watchdog" concept of freedom of the press. This concept suggests that the basis for the constitutional protection of press freedom is the role of the press as an institution serving a collective good, as opposed to the traditional view of…

  20. MULTICOMPONENT AEROSOL DYNAMICS OF THE PB-O2 SYSTEM IN A BENCH SCALE FLAME INCINERATOR

    EPA Science Inventory

    A study was carried out to understand the formation and growth of lead particles in a flame incinerator. A bench scale flame incinerator was used to perform controlled experiments with lead acetate as a test compound. A dilution probe in conjunction with real-time aerosol instrum...

  1. EVALUATING BENCH-SCALE NANOFILTRATION STUDIES FOR PREDICTING FULL-SCALE PERFORMANCE

    EPA Science Inventory

    The Information Collection Rule (ICR) requires water utilities of a certain size and water quality to conduct bench or pilot testing of either granular activated carbon or membranes for the control of disinfection byproduct (DBP) precursors. his paper evaluates the effectiveness ...

  2. Machine Shop. Module 3: Bench Work and Material Science. Instructor's Guide.

    ERIC Educational Resources Information Center

    Walden, Charles H.; Nobles, Jack

    This document consists of materials for an 11-unit course on the following topics: (1) hacksawing; (2) filing and deburring; (3) locating centers for drilling; (4) cutting threads with tap and die; (5) using a hand reamer; (6) pedestal/bench grinder operation; (7) whetting, polishing, and lapping; (8) screw, drill, and tap extraction; (9) arbor…

  3. ETR, TRA642. BENCH MARK AND ELEVATION LOCATIONS, FLOOR LOADING DATA, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR, TRA-642. BENCH MARK AND ELEVATION LOCATIONS, FLOOR LOADING DATA, CRANE WORKING AREAS. PHILLIPS PETROLEUM COMPANY ETR-D-1584, 5/1959. INL INDEX NO. 532-0642-00-706-020323, REV. 3. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  4. STS-26 crewmembers participate in bench review at offsite Boeing Bldg

    NASA Technical Reports Server (NTRS)

    1988-01-01

    STS-26 Discovery, Orbiter Vehicle (OV) 103, crewmembers participate in bench review at the offsite Boeing Building. Mission Specialist (MS) David C. Hilmers tests an electric razor while MS George D. Nelson reviews clipboard checklist and looks over hygiene supplies (razors, deodorants, tooth paste, etc.). Photograph was taken by Keith Meyers of the NEW YORK TIMES.

  5. STS-26 crewmembers participate in bench review at offsite Boeing Bldg

    NASA Technical Reports Server (NTRS)

    1988-01-01

    STS-26 Discovery, Orbiter Vehicle (OV) 103, crewmembers participate in bench review at the offsite Boeing Building. Left to right Mission Specialist (MS) David C. Hilmers, MS George D. Nelson, Commander Frederick H. Hauck, and Pilot Richard O. Covey, holding clipboards with checklists, look over hygiene supplies (razors, deodorants, tooth paste, etc.). Photograph was taken by Keith Meyers of the NEW YORK TIMES.

  6. Measure Twice, Build Once: Bench-Scale Testing to Evaluate Bioretention Media Design - slides

    EPA Science Inventory

    The oral presentation will be at the EWRI International LID Conference in San Francisco, on April 11-14, 2010. The slides discuss the utility of conducting bench-scale testing on selected bioretention media and media amendments to validate hydrologic properties before installing...

  7. REVIEW OF BENCH-, PILOT-, AND FULL-SCALE ORIMULSION (R) COMBUSTION TESTS

    EPA Science Inventory

    The paper gives results of a review of bench-, pilot-, and full-scale Orimulsion combustion tests. A fossil fuel marketed by its producer, Petroleos de Venezuela, S.A. (PdVSA), since the late 1980s as an alternative to coal and heavy fuel oil, Orimulsion is a bitumen-in-water em...

  8. Prototype of a test bench for applied research on Extracted beams of the nuclotron accelerator complex

    NASA Astrophysics Data System (ADS)

    Baldin, A. A.; Berlev, A. I.; Bradnova, V.; Butenko, A. V.; Fedorov, A. N.; Kudashkin, I. V.

    2016-05-01

    The results of the development and testing of elements of a test bench for investigating the impact of accelerated particle beams on biological objects, electronics, and other targets are presented. The systems for beam monitoring and target positioning were tested on extracted argon beams in the framework of experiments on studying the radiation hardness of electronic components.

  9. HEU Holdup Measurements in the 321-M Draw Bench, Straightener, and Fluoroscope Components

    SciTech Connect

    Dewberry, R.A.

    2001-07-10

    The Analytical Development Section of Savannah River Technology Center (SRTC) was requested by the Facilities Disposition Division (FDD) to determine the holdup of enriched uranium in the 321-M facility as part of an overall deactivation project of the facility. This report covers holdup measurements of uranium residue on the draw bench, straightener, and the fluoroscope components of the 321-M facility.

  10. SOLVENT EXTRACTION AND SOIL WASHING TREATMENT OF CONTAMINATED SOILS FROM WOOD PRESERVING SITES: BENCH SCALE STUDIES

    EPA Science Inventory

    Bench-scale solvent extraction and soil washing studies were performed on soil samples obtained from three abandoned wood preserving sites that included in the NPL. The soil samples from these sites were contaminated with high levels of polyaromatic hydrocarbons (PAHs), pentachlo...

  11. Catalytic Pyrolysis of Oak via Pyroprobe and Bench Scale, Packed Bed Pyrolysis Reactors

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The pyrolytic conversion of oak sawdust at 500°C in flowing He over eight proprietary catalysts is described and compared to the control bed material, quartz sand. The reactions were conducted and compared in two reactors, an analytical, ug-scale pyroprobe reactor and a bench, g-scale packed bed re...

  12. Bench-Scale Evaluation Of Chemically Bonded Phosphate Ceramic Technology To Stabilize Mercury Waste Mixtures

    EPA Science Inventory

    This bench-scale study was conducted to evaluate the stabilization of mercury (Hg) and mercuric chloride-containing surrogate test materials by the chemically bonded phosphate ceramics technology. This study was performed as part of a U.S. EPA program to evaluate treatment and d...

  13. Characterization benches for neutrino telescope Optical Modules at the APC laboratory

    NASA Astrophysics Data System (ADS)

    Avgitas, Theodore; Creusot, Alexandre; Kouchner, Antoine

    2016-04-01

    As has been demonstrated by the first generation of neutrino telescopes Antares and IceCube, precise knowledge of the photon detection efficiency of optical modules is of fundamental importance for the understanding of the instrument and accurate event reconstruction. Dedicated test benches have been developed to measure all related quantities for the Digital Optical Modules of the KM3NeT neutrino telescope being currently deployed in the Mediterranean sea. The first bench is a black box with robotic arms equipped with a calibrated single photon source or laser which enable a precise mapping of the detection efficiency at arbitrary incident angles as well as precise measurements of the time delays induced by the photodetection chain. These measurement can be incorporated and compared to full GEANT MonteCarlo simulations of the optical modules. The second bench is a 2 m×2 m ×2 m water tank equipped with muon hodoscopes on top and bottom. It enables to study and measure the angular dependence of the DOM's detection efficiency of the Cherenkov light produced in water by relativistic muons, thus reproducing in situ detection conditions. We describe these two benches and present their first results and status.

  14. Bench-Scale Evaluation of Peracetic Acid and Twin Oxide ™ as Disinfectants in Drinking Water

    EPA Science Inventory

    Chlorine is widely used as an inexpensive and potent disinfectant in the United States for drinking water. However, chlorine has the potential for forming carcinogenic and mutagenic disinfection by-products (DBPs). In this study, bench scale experiments were conducted at the U.S...

  15. Measurement of wheelchair contact force with a low cost bench test.

    PubMed

    Silva, L C A; Dedini, F G; Corrêa, F C; Eckert, J J; Becker, M

    2016-02-01

    In mechanical engineering, it is well established that contact between the tire and the ground is a key parameter in characterizing the dynamic behavior of vehicles and an important factor in design control. Therefore, it is an important part of dynamic simulation models for vehicles, including wheelchairs. This work presents a bench test designed to experimentally monitor and measure the forces transmitted to the ground by a moving wheel. The test bench is composed of a table and a track with a fixed wheel structure and powertrain system. The table is an integrated structure that measures the longitudinal and lateral forces produced by tire contact. This table allows characterization of the tire and tests the tire under varying loads at different slip and camber angles. Additionally, the test bench can also be used to evaluate other tires, such as caster tires. The performances of the new device are illustrated, and the results show the differences between tires, which are related to the dynamic behaviors of wheelchair model. Finally, preliminary experiments performed using the test bench have shown that it is able to monitor and measure the forces generated by the contact between the tire and the ground. PMID:26732696

  16. BENCH SCALE FIXATION OF SOILS FROM THE TACOMA TAR PITS SUPRFUND SITE

    EPA Science Inventory

    This report documents the results of bench-scale soil fixation study conducted with materials from the Tacoma Tar Pits SuperfundSite. Chemical fixation (also called stabilization/solidification)is a relatively new technique for remediating contaminated soils. It entails both immo...

  17. Preserving a legacy for our patients: The bedside-to-bench award in translational research

    PubMed Central

    2008-01-01

    The Journal of Translational Medicine is pleased to announce a prize to recognize outstanding contributions in the field of translational medicine. This year, the Bedside-to-Bench Award was provided by an anonymous donor and supported by the Journal of Translational Medicine Editorial Board. Applications should be submitted directly to the Journal of Translational Medicine [1].

  18. BENCH-SCALE EVALUATION OF CALCIUM SORBENTS FOR ACID GAS EMISSION CONTROL

    EPA Science Inventory

    Calcium sorbents for acid gas emission control were evaluated for effectiveness in removing SO2/HCl and SO2/NO from simulated incinerator and boiler flue gases. All tests were conducted in a bench-scale reactor (fixed-bed) simulating fabric filter conditions in an acid gas remova...

  19. Issues in mass spectrometry between bench chemists and regulatory laboratory managers

    Technology Transfer Automated Retrieval System (TEKTRAN)

    At the 123rd AOAC Annual Meeting in Philadelphia, 45 residue chemists gathered for a roundtable discussion of mass spectrometry (MS) for regulatory purposes involving chemical residues analysis. The session was conceived to address current technical and communication issues about MS between “bench ...

  20. OPERATIONAL EXPERIENCE OF THE EPA OWNED BENCH SCALE PILOT PLANT FOR EVALUATING SCR DENOX CATALYSTS

    EPA Science Inventory

    The paper discusses the use of EPA's bench-scale pilot plant to evaluate catalysts used in the ammonia (NH3)-based technology and process for selective catalytic reduction (SCR) of nitrogen oxides. A key objective was to establish the performance of SCR catalysts on U.S. uels and...

  1. COMPARING RBF WITH BENCH-SCALE CONVENTIONAL TREATMENT FOR PRECURSOR REDUCTION

    EPA Science Inventory

    The reduction of disinfection by-product (DBP) precursors upon riverbank filtration (RBF) at three drinking water utilities in the mid-Western United States was compared with that obtained using a bench-scale conventional treatment train on the corresponding river waters. The riv...

  2. DEGRADATION OF POLYNUCLEAR AROMATIC HYDROCARBONS UNDER BENCH-SCALE COMPOST CONDITIONS

    EPA Science Inventory

    The relationship between biomass growth and degradation of polynuclear aromatic hydrocarbons (PAHs) in soil, and subsequent toxicity reduction, was evaluated in 10 in-vessel, bench-scale compost units. Field soil was aquired from the Reilly Tar and Chemical Company Superfund site...

  3. Catalytic Products from a Bench-Scale, Simulated Fluidized-Bed Pyrolyzer

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Biomass (e.g. lignocellulosics and lipids) were catalytically converted under thermochemical conditions to bio-based, fungible industrial chemicals and products. The focus was on high temperature catalytic conversions of feedstocks in a bench-scale reactor designed to replicate a packed- or fluidiz...

  4. Optimal load for the peak power and maximal strength of the upper body in Brazilian Jiu-Jitsu athletes.

    PubMed

    da Silva, Bruno Victor C; Simim, Mário A de Moura; Marocolo, Moacir; Franchini, Emerson; da Mota, Gustavo R

    2015-06-01

    We determined the optimal load for the peak power output (PPO) during the bench press throw (BPT) in Brazilian Jiu-Jitsu (BJJ) athletes and compared the PPO and maximal strength between advanced (AD) and nonadvanced (NA) athletes. Twenty-eight BJJ athletes (24.8 ± 5.7 years) performed the BPT at loads of 30, 40, 50, and 60% of their 1 repetition maximum (RM) in a randomized order (5-minute rest between BPTs). The PPO was determined by measuring the barbell displacement by an accelerometer (Myotest). The absolute (F = 7.25; p < 0.001; effect size [ES] = 0.21) and relative intensities were different (F = 7.11; p < 0.001; ES = 0.21) between the AD and NA. There was also a group and intensity interaction effect (F = 2.79; p = 0.046; ES = 0.10), but the differences were centered around the AD group, which achieved higher values using 40% (p = 0.001) and 50% of the 1RM (p < 0.001) than the PPO with 60% of 1RM. The AD athletes presented with higher 1RM than NA (p ≤ 0.05; ES = 1.0), but there was no difference (p > 0.05) in the PPO (30-60% 1RM). A polynomial adjustment indicated that the optimal load was ∼42% of 1RM for all groups and subgroups (R from 0.82 to 0.99). Our results suggest that there can be (1RM) differences between AD and NA BJJ athletes; however, there is no difference in the muscle power between the AD and NA groups. Additionally, ∼42% of 1RM seems to be the optimal load for developing maximal power using the BPT for the BJJ athletes. PMID:25486298

  5. Test-bench system for a borehole azimuthal acoustic reflection imaging logging tool

    NASA Astrophysics Data System (ADS)

    Liu, Xianping; Ju, Xiaodong; Qiao, Wenxiao; Lu, Junqiang; Men, Baiyong; Liu, Dong

    2016-06-01

    The borehole azimuthal acoustic reflection imaging logging tool (BAAR) is a new generation of imaging logging tool, which is able to investigate stratums in a relatively larger range of space around the borehole. The BAAR is designed based on the idea of modularization with a very complex structure, so it has become urgent for us to develop a dedicated test-bench system to debug each module of the BAAR. With the help of a test-bench system introduced in this paper, test and calibration of BAAR can be easily achieved. The test-bench system is designed based on the client/server model. The hardware system mainly consists of a host computer, an embedded controlling board, a bus interface board, a data acquisition board and a telemetry communication board. The host computer serves as the human machine interface and processes the uploaded data. The software running on the host computer is designed based on VC++. The embedded controlling board uses Advanced Reduced Instruction Set Machines 7 (ARM7) as the micro controller and communicates with the host computer via Ethernet. The software for the embedded controlling board is developed based on the operating system uClinux. The bus interface board, data acquisition board and telemetry communication board are designed based on a field programmable gate array (FPGA) and provide test interfaces for the logging tool. To examine the feasibility of the test-bench system, it was set up to perform a test on BAAR. By analyzing the test results, an unqualified channel of the electronic receiving cabin was discovered. It is suggested that the test-bench system can be used to quickly determine the working condition of sub modules of BAAR and it is of great significance in improving production efficiency and accelerating industrial production of the logging tool.

  6. Effect of compensatory acceleration training in combination with accommodating resistance on upper body strength in collegiate athletes

    PubMed Central

    Jones, Margaret T

    2014-01-01

    Purpose To determine the impact of inclusion of a band or chain compensatory acceleration training (CAT), in a 5-week training phase, on maximal upper body strength during a 14-week off-season strength and conditioning program for collegiate male athletes. Patients and methods Twenty-four National Collegiate Athletic Association (NCAA) collegiate baseball players, who were familiar with the current strength and conditioning program and had a minimum of 1 year of formal collegiate strength and conditioning experience, participated in this off-season training study. None of the men had participated in CAT before. Subjects were matched following a maximal effort (1-repetition maximum [1-RM]) bench press test in week 1, then were randomly assigned into a band-based CAT group or a chain-based CAT group and participated in a 5-week training phase that included bench pressing twice per week. Upper body strength was measured by 1-RM bench press again at week 6. A 2 × 2 mixed factorial (method × time) analysis of variance was calculated to compare differences across groups. The alpha level was set at P<0.05. Results No difference (F1,22=0.04, P=0.84) existed between the band-based CAT and chain-based CAT groups. A significant difference was observed between pre- and posttests of 1-RM bench (F1,22=88.46, P=0.001). Conclusion A 5-week band CAT or chain CAT training program used in conjunction with an off-season strength and conditioning program can increase maximal upper body strength in collegiate baseball athletes. Using band CAT and/or chain CAT as a training modality in the off-season will vary the training stimulus from the traditional and likely help to maintain the athlete’s interest. PMID:25177154

  7. Astronomy Press Releases: What We Choose To Share

    NASA Astrophysics Data System (ADS)

    Gay, Pamela L.

    2009-01-01

    Everyday, astronomy departments and facilities around the world issue press releases via the AAS Press Release service. These stories are selected for a variety of reasons that often (but do not always) include: the significance of a discover, public appeal, it is a first/last/largest/smallest discovery, and something historic has occurred (for instance, launch of a space craft). What astronomers as a field select to communicate to the public via press releases shapes public understanding of astronomy.In this poster, 6 months of press releases sent via email from the AAS Press Release service are examined to see how astronomy was communicated from January 1, 2008 through June 30, 2008. Press Releases are classified by topic using Astrophysical Journal keywords to look for trends, and the words used in the titles are studied to see what words press officers and scientists are using to communicate and to entice content providers into reporting their stories. Additionally, the first 100 discrete discoveries are examined to see which releases have more coverage within the blogisphere and trends in what is and is not covered are examined.

  8. Pressing effect in polymer solar cells with bulk heterojunction nanolayers.

    PubMed

    Park, Jiho; Nam, Sungho; Kim, Hwajeong; Kim, Youngkyoo

    2011-01-01

    We report the effect of pressing light-absorbing layers on the performance of polymer solar cells. The light-absorbing active layer was prepared on the transparent conducting oxide coated substrates from solutions that contain a mixture of regioregular poly(3-hexylthiophene) and soluble fullerene molecules. The active layers were pressed using a home-built micro-press system by controlling temperature and pressure, followed by the top electrode deposition. The surface of the active layers pressed was examined using atomic force microscope, while the photovoltaic characteristics of devices were measured under simulated solar light illumination (air mass 1.5 G, 100 mW/cm2). Results showed that the dark current of devices was noticeably increased by pressing the active layer without respect to the pressing temperature. The highest power conversion efficiency was achieved for the device with the active layer pressed under 10 kgf at 70 degrees C. The result was explained in terms of surface morphology and thermophysical effect. PMID:21446447

  9. Zinc coated sheet steel for press hardening

    NASA Astrophysics Data System (ADS)

    Ghanbari, Zahra N.

    Galvanized steels are of interest to enhance corrosion resistance of press-hardened steels, but concerns related to liquid metal embrittlement have been raised. The objective of this study was to assess the soak time and temperature conditions relevant to the hot-stamping process during which Zn penetration did or did not occur in galvanized 22MnB5 press-hardening steel. A GleebleRTM 3500 was used to heat treat samples using hold times and temperatures similar to those used in industrial hot-stamping. Deformation at both elevated temperature and room temperature were conducted to assess the coating and substrate behavior related to forming (at high temperature) and service (at room temperature). The extent of alloying between the coating and substrate was assessed on undeformed samples heat treated under similar conditions to the deformed samples. The coating transitioned from an α + Gamma1 composition to an α (bcc Fe-Zn) phase with increased soak time. This transition likely corresponded to a decrease in availability of Zn-rich liquid in the coating during elevated temperature deformation. Penetration of Zn into the substrate sheet in the undeformed condition was not observed for any of the processing conditions examined. The number and depth of cracks in the coating and substrate steel was also measured in the hot-ductility samples. The number of cracks appeared to increase, while the depth of cracks appeared to decrease, with increasing soak time and increasing soak temperature. The crack depth appeared to be minimized in the sample soaked at the highest soak temperature (900 °C) for intermediate and extended soak times (300 s or 600 s). Zn penetration into the substrate steel was observed in the hot-ductility samples soaked at each hold temperature for the shortest soak time (10 s) before being deformed at elevated temperature. Reduction of area and elongation measurements showed that the coated sample soaked at the highest temperature and longest soak time

  10. 57. ORIGINAL TILE PRESS AND EXPERIMENTAL DENTAL KILN, SECOND FLOOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    57. ORIGINAL TILE PRESS AND EXPERIMENTAL DENTAL KILN, SECOND FLOOR, NORTH WING, HENRY MERCER USED THE KILN FOR HIS EARLIEST GLAZE TESTS. THE PRESS WAS DESIGNED TO BE USED WITH METAL CASED MOLDS. SINCE ONLY THE EARLIEST TILE DESIGNS ARE IN METAL CASES. THIS TECHNIQUE WAS PROBABLY DISCONTINUED. THIS PRESS WAS, THEREFORE, PROBABLY NOT USED EXTENSIVELY AT THIS SITE. THE UPPER PART OF GLAZE KILN No. 2 IS AT THE LEFT REAR. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

  11. The Enigmatic Bench Unit of Endeavour Crater Rim in Meridiani Planum, Mars

    NASA Astrophysics Data System (ADS)

    Ruff, S. W.

    2013-12-01

    For the first 2680 sols of its mission, the Mars Exploration Rover Opportunity traversed across essentially the same rocks: sulfur-rich sandstones known as the Burns formation. On August 8, 2011 Opportunity completed a ~21 km traverse from Victoria crater to the rim of the ~22 km diameter Endeavour crater where it crossed a slightly raised smooth bench unit that surrounds an interior core of higher standing and more rugged terrain on a rim segment named Cape York. As recognized by its distinctive morphologic character evident in orbital images, the inward sloping bench feature is found associated with portions of other segments of the discontinuous raised rim of Endeavour crater. Viewed by Opportunity, it appears as platy, fractured, relatively light-toned outcrop that is fine-grained, lacks hematite concretions and in places hosts veins of Ca- and S-rich composition, likely due to precipitation of gypsum in fractures that cut the bench unit (1). The bench outcrop target named Grasberg included a grind using the Rock Abrasion Tool (RAT) to obtain a cleaner surface for the Alpha Particle X-ray Spectrometer chemistry measurement compared with the initially investigated target named Deadwood. In addition to its greater strength than Burns formation as determined by the RAT grind operation, Grasberg and other examples of the bench unit have lower S, higher Cl and other elemental characteristics that depart from typical Burns formation. Thus the 'Grasberg unit' clearly represents a distinct rock type compared to the Meridiani plains. A second unit makes up the exposed core of the Cape York rim segment. Known as Shoemaker formation, it is composed of breccias that are recognized as a suevite deposit produced from the Endeavour impact event (1). The Shoemaker formation appears to be onlapped by the Grasberg unit with Burns formation onlapping it (1). However, a well-exposed section observed in a wedge-shaped fracture known as Whim Creek on the northeast portion of the

  12. Pyrometry in the Multianvil Press: New approach for temperature measurement in large volume press experiments

    NASA Astrophysics Data System (ADS)

    Sanehira, T.; Wang, Y.; Prakapenka, V.; Rivers, M. L.

    2008-12-01

    Temperature measurement in large volume press experiments has been based on thermocouple emf, which has well known problems: unknown pressure dependence of emf [e.g., 1], chemical reaction between thermocouple and other materials, deformation related texture development in the thermocouple wires [2], and so on. Thus, different techniques to measure temperatures in large volume press experiments other than thermocouples are required to measure accurate temperatures under high pressures. Here we report a new development using pyrometry in the multianvil press, where temperatures are derived on the basis of spectral radiometry. Several high pressure runs were conducted using the 1000 ton press with a DIA module installed at 13 ID-D GSECARS beamline at Advanced Photon Source (APS) [3]. The cubic pressure medium, 14 mm edge length, was made of soft-fired pyrophyllite with a graphite furnace. A moissanite (SiC) single crystal was built inside the pressure medium as a window for the thermal emission signal to go through. An MgO disk with 1.0 mm thickness was inserted in a gap between the top of the SiC crystal and thermocouple hot junction. The bottom of the window crystal was in direct contact with the tip of the anvil, which had a 1.5 mm diameter hole drilled all the way through the anvil axis. An optical fiber was inserted in this hole and the open end of fiber was in contact with the SiC crystal. Thermal spectral radiance from the inner cell assembly was obtained via the fiber and recorded by an Ocean Optics HP2000 spectrometer. The system response of spectrometer was calibrated by a tungsten ribbon ramp (OL550S, Optronic Laboratories, Inc.) with standard of spectral radiance. The cell assembly was compressed up to target value of 15 tons and then temperature was increased up to 1573 K. Radiation spectra were mainly obtained above 873 K and typical integration time was 1 ms or 10 ms. Data collection was done in the process of increase and decrease of temperature. In

  13. Development of a lightweight near-zero CTE optical bench for the Wide-Field Camera 3 instrument

    NASA Astrophysics Data System (ADS)

    Holz, Jill M.; Kunt, Cengiz; Lashley, Chris; McGuffey, Douglas B.

    2003-02-01

    The design and development of an optical bench (OB) for Wide Field Camera 3 (WFC3), a next generation science instrument for the Hubble Space Telescope (HST) has proven a challenging task. WFC3 will replace Wide Field Planetary Camera 2 (WF/PC 2) during the next servicing mission of the HST in 2004. The WFC3 program is re-using much of the hardware from WF/PC 1, returned from the First Servicing Mission, which has added complexity to the program. This posed some significant packaging challenges, further complicated by WFC3 utilizing two, separate optical channels. The WF/PC 1 optical bench could not house the additional optical components, so a new bench was developed. The new bench had to be designed to accommodate the sometimes-conflicting requirements of the two channels, which operate over a wavelength range of 200nm to 1800nm, from Near Ultraviolet to Near Infrared. In addition, the bench had to interface to the reused WF/PC 1 hardware, which was not optimized for this mission. To aid in the design of the bench, the team used software tools to merge structural, thermal and optical models to obtain performance (STOP) of the optical systems in operation. Several iterations of this performance analysis were needed during the design process to verify the bench would meet requirements. The fabrication effort included a rigorous material characterization program and significant tooling. After assembly, the optical bench underwent an extensive qualification program to prove the design and manufacturing processes. This paper provides the details of the design and development process of this highly optimized optical bench.

  14. VIEW WEST, 1ST FLOOR, EAST ROOM, HYDRAULIC COTTON PRESS, DETAIL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW WEST, 1ST FLOOR, EAST ROOM, HYDRAULIC COTTON PRESS, DETAIL, CONTINENTAL GIN COMPANY HYDRAULIC TANK - Magnolia Plantation, Cotton Gins & Presses, LA Route 119, Natchitoches, Natchitoches Parish, LA

  15. Renovation of the hot press in the Plutonium Experimental Facility

    SciTech Connect

    Congdon, J.W.; Nelson, G.H.

    1990-03-05

    The Plutonium Experimental Facility (PEF) will be used to develop a new fuel pellet fabrication process and to evaluate equipment upgrades. The facility was used from 1978 until 1982 to optimize the parameters for fuel pellet production using a process which was developed at Los Alamos National Laboratory. The PEF was shutdown and essentially abandoned until mid-1987 when the facility renovations were initiated by the Actinide Technology Section (ATS) of SRL. A major portion of the renovation work was related to the restart of the hot press system. This report describes the renovations and modifications which were required to restart the PEF hot press. The primary purpose of documenting this work is to help provide a basis for Separations to determine the best method of renovating the hot press in the Plutonium Fuel Fabrication (PuFF) facility. This report also includes several SRL recommendations concerning the renovation and modification of the PuFF hot press. 4 refs.

  16. 41. Detail of punch press on left and large metal ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. Detail of punch press on left and large metal plate shear, Boiler Shop, located in north end of Machine Shop Building. - Thames Tow Boat Company, Foot of Farnsworth Street, New London, New London County, CT

  17. Rugged pressed disk electrode has low contact potential

    NASA Technical Reports Server (NTRS)

    Day, J. L.; Mosier, B.

    1965-01-01

    Pressed-disk electrode with low contact potential monitors physiological processes. It consists of silver and silver chloride combined with bentonitic clay. The clay affords a surface that permits use over extended periods without contact deterioration.

  18. VIEW OF INTERIOR SPACE WITH HUFFORD BULLDOZIER FORMING PRESS IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF INTERIOR SPACE WITH HUFFORD BULLDOZIER FORMING PRESS IN FOREGROUND, FACING NORTHWEST. - Douglas Aircraft Company Long Beach Plant, Aircraft Parts Shipping & Receiving Building, 3855 Lakewood Boulevard, Long Beach, Los Angeles County, CA

  19. VIEW OF INTERIOR SPACE WITH SQUARE SHAPE STRETCH PRESS CONTAINMENT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF INTERIOR SPACE WITH SQUARE SHAPE STRETCH PRESS CONTAINMENT PITS CENTER, FACING NORTH. - Douglas Aircraft Company Long Beach Plant, Aircraft Parts Shipping & Receiving Building, 3855 Lakewood Boulevard, Long Beach, Los Angeles County, CA

  20. VIEW OF INTERIOR SPACE WITH RECTANGULAR SHAPE STRETCH PRESS CONTAINMENT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF INTERIOR SPACE WITH RECTANGULAR SHAPE STRETCH PRESS CONTAINMENT PIT IN BACKGROUND, FACING NORTH. - Douglas Aircraft Company Long Beach Plant, Aircraft Parts Shipping & Receiving Building, 3855 Lakewood Boulevard, Long Beach, Los Angeles County, CA

  1. 5. FOURTH FLOOR, HOTEL SOAP LINES TO NORTHWEST: PRESS (LEFT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. FOURTH FLOOR, HOTEL SOAP LINES TO NORTHWEST: PRESS (LEFT CENTER), MANUAL CUTTERS (CENTER, RIGHT CENTER) - Colgate & Company Jersey City Plant, Building No. B-15, 90-96 Greene Street, Jersey City, Hudson County, NJ

  2. 8. Second floor front apartment showing ornately painted pressed metal ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. Second floor front apartment showing ornately painted pressed metal ceiling, as well as modern partitions and wall treatments. View looking north. - Franklin Grocery Company Building, 1 South Main Street, Franklin, Merrimack County, NH

  3. 13. RADIAL DRILL, ENGINE LATHE, DRILL PRESS, AND GRINDER (L ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. RADIAL DRILL, ENGINE LATHE, DRILL PRESS, AND GRINDER (L TO R)-LOOKING SOUTHEAST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

  4. INTERIOR VIEW WITH CARLTON RADIAL ARM DRILL PRESS (THE CARLTON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW WITH CARLTON RADIAL ARM DRILL PRESS (THE CARLTON MACHINE TOOL CO., CINCINNATI, OHIO) WITH MACHINE OPERATOR, EDDIE BURTTRAM. - O'Neal Steel, Incorporated, Fabrication Shop, 744 Forty-first Avenue North, Birmingham, Jefferson County, AL

  5. 20. VIEW OF WATSON STILHMAN DISMOUNTING WHEEL PRESS. 600 tons. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. VIEW OF WATSON STILHMAN DISMOUNTING WHEEL PRESS. 600 tons. Gary Stich, operator. - Juniata Shops, Erecting Shop & Machine Shop, East of Fourth Avenue, between Fourth & Fifth Streets, Altoona, Blair County, PA

  6. Study of pressing machine pressure relief characteristics based on AMESim

    NASA Astrophysics Data System (ADS)

    Wang, Chuanli; Zhang, Hui; Yu, Caofeng; Wu, Xiaolei

    2016-01-01

    When a working cylinder of the pressing machine working cylinder was stuck and underwent retracted conversion, pressure shock was high in working cylinder cavity and flow pulsation was distinct in the pipeline due to the high working pressure and frequent retracted transformation of the working cylinder, which not only shortened the service life of the pressing machine, but also exerted serious impacts on the machining precision and quality, especially after the pressing machine applied loads and high-pressure oil in work rod end cavity of working cylinder needed to be relieved in a short time. In order to research and analyze the better pressure relief characteristics of the two types of pressure relief circuits of the pressing machine, the paper established models, carried out simulation and analysis and then made contrastive analysis of the working cylinder rod velocity, rod acceleration and port pressure pulsation according to the simulation results.

  7. AUTOMOTIVE REPAIR SHOP, DETAIL OF FABRICATING PRESS IN EAST END ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, DETAIL OF FABRICATING PRESS IN EAST END OF MAIN WING, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  8. Methods to identify the lactate and glucose thresholds during resistance exercise for individuals with type 2 diabetes.

    PubMed

    Moreira, Sérgio R; Arsa, Gisela; Oliveira, Hildeamo B; Lima, Laila C J; Campbell, Carmen S G; Simões, Herbert G

    2008-07-01

    The purpose of this study was to compare different methods to identify the lactate threshold (LT) and glucose threshold (GT) on resistance exercise for individuals with type 2 diabetes. Nine men with type 2 diabetes (47.2 +/- 12.4 years, 87.6 +/- 20.0 kg, 174.9 +/- 5.9 cm, and 22.4 +/- 7.2% body fat) performed incremental tests (ITs) on the leg press (LP) and bench press (BP) at relative intensities of 10, 20, 25, 30, 35, 40, 50, 60, 70, 80, and 90% of one-repetition maximum (1RM) at each 1-minute stage. During the 2-minute interval between stages, 25 mul of capillary blood were collected from the earlobe for blood lactate [Lac] and blood glucose [Gluc] analysis (YSI 2700S). The LT in the LP and BP was identified at IT by the inflexion in [Lac] response as well as by an equation originated from a polynomial adjustment (LTp) of the [Lac]/% 1RM ratio responses. The lowest [Gluc] during the IT identified the GT. The analysis of variance did not show differences among the 1RM at the thresholds identified by different methods in the LP (LTLP = 31.0% +/- 5.3% 1RM; GTLP = 32.1% +/- 6.1% 1RM; LTpLP = 36.7% +/- 5.6% 1RM; p > 0.05) and BP (LTBP = 29.9% +/- 8.5% 1RM; GTBP = 32.1% +/- 8.5% 1RM; LTpBP = 31.8% +/- 6.7% 1RM; p > 0.05). It was concluded that it was possible to identify the LT and GT in resistance exercise by different methods for individuals with type 2 diabetes with no differences between them. The intensities (kg) corresponding to these thresholds were between 46% and 60% of the body weight on the LP and between 18% and 26% of the body weight on the BP, in which the exercise prescription would be done to this intensity in 3 sets of 20 to 30 repetitions each and 1 minute of rest while alternating the muscle groups for blood glucose control for individuals with characteristics similar to the participants. PMID:18545200

  9. Femoral Blood Flow and Cardiac Output During Blood Flow Restricted Leg Press Exercise

    NASA Technical Reports Server (NTRS)

    Everett, M. E.; Hackney, K.; Ploutz-Snyder, L.

    2011-01-01

    Low load blood flow restricted resistance exercise (LBFR) causes muscle hypertrophy that may be stimulated by the local ischemic environment created by the cuff pressure. However, local blood flow (BF) during such exercise is not well understood. PURPOSE: To characterize femoral artery BF and cardiac output (CO) during leg press exercise (LP) performed at a high load (HL) and low load (LL) with different levels of cuff pressure. METHODS: Eleven subjects (men/women 4/7, age 31.4+/-12.8 y, weight 68.9+/-13.2 kg, mean+/-SD) performed 3 sets of supine left LP to fatigue with 90 s of rest in 4 conditions: HL (%1-RM/cuff pressure: 80%/0); LL (20%/0); LBFR(sub DBP) (20%/1.3 x diastolic blood pressure, BP); LBFR(sub SBP) (20%/1.3 x supine systolic BP). The cuff remained inflated throughout the LBFR exercise sessions. Artery diameter, velocity time integral (VTI), and stroke volume (SV) were measured using Doppler ultrasound at rest and immediately after each set of exercise. Heart rate (HR) was monitored using a 3-lead ECG. BF was calculated as VTI x vessel cross-sectional area. CO was calculated as HR x SV. The data obtained after each set of exercise were averaged and used for analyses. Multi-level modeling was used to determine the effect of exercise condition on dependent variables. Statistical significance was set a priori at p< 0.05. RESULTS: Artery diameter did not change from baseline. BF increased (p<0.05) after exercise in each condition except LBFR(sub SBP) in the order of HL (12.73+/-1.42 cm3,mean+/-SE) > LL (9.92+/-0.82 cm3) > LBFR(sub dBP)(6.47+/-0.79 cm3) > LBFR(sub SBP) (3.51+/-0.59 cm3). Blunted exercise induced increases occurred in HR, SV, and CO after LBFR compared to HL and LL. HR increased 45% after HL and LL and 28% after LBFR (p<0.05), but SV increased (p<0.05) only after HL. Consequently, the increase (p<0.05) in CO was greater in HL and LL (approximately 3 L/min) than in LBFR (approximately 1 L/min). CONCLUSION: BF during LBFR(sub SBP) was 1/3 of

  10. 55. QUARRY TILE CUTTERS, SECOND FLOOR, NORTH WING. WORKERS PRESSED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    55. QUARRY TILE CUTTERS, SECOND FLOOR, NORTH WING. WORKERS PRESSED THE CUTTERS INTO SLABS OF CLAY, LIFTED THEM ONTO DRYING BOARDS AND PRESSED THE PLUNGERS TO RELEASE THE CUT TILES. REPRODUCTIONS CUTTERS ARE NOT USED IN PRODUCTION. WOODEN FORMS FOR PRODUCING CLAY SLABS WITH ROLLING PINS REST AGAINST THE WALL. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

  11. VIEW OF THE INSTALLATION OF AN EXTRUSION PRESS IN THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF THE INSTALLATION OF AN EXTRUSION PRESS IN THE HIGH BAY AREA OF BUILDING 865. THE EXTRUSION PRESS WAS USED TO PRODUCE CYLINDRICAL BARS, HOLLOW TUBES, AND SHAPES WITH IRREGULAR CROSS-SECTIONS BY FORCING PREHEATED METAL THROUGH A DIE ORIFICE UNDER HIGH PRESSURE. (5/22/70) - Rocky Flats Plant, Metal Research & Development Laboratory, South of Central Avenue at south end of terminus of Ninth Avenue, Golden, Jefferson County, CO

  12. Gemini 10 prime crew during post flight press conference

    NASA Technical Reports Server (NTRS)

    1966-01-01

    At podium during Gemini 10 press conference are (l-r) Dr. Robert C. Seamans, Astronauts John Young and Michael Collins and Dr. Robert R. Gilruth (39895); Wide angle view of the Manned Spacecraft Center (MSC) News Center during the Gemini 10 prime crew post flight press conference (38786); Astronaut Young draws diagram on chalk board of tethered extravehicular activity accomplished during Gemini 10 flight (39897).

  13. Low-loss binder for hot pressing boron nitride

    DOEpatents

    Maya, Leon

    1991-01-01

    Borazine derivatives used as low-loss binders and precursors for making ceramic boron nitride structures. The derivative forms the same composition as the boron nitride starting material, thereby filling the voids with the same boron nitride material upon forming and hot pressing. The derivatives have a further advantage of being low in carbon thus resulting in less volatile byproduct that can result in bubble formation during pressing.

  14. Grain refinement of aluminum using equal-channel angular pressing

    SciTech Connect

    Horita, Z.; Furukawa, M.; Nemoto, M.; Langdon, T.G.

    2000-07-01

    Using the technique of equal-channel angular (ECA) pressing, it is possible to reduce the grain size of polycrystalline materials to the submicrometer level. Thus, this processing technique has the potential for producing materials which may exhibit superplasticity. This paper describes various factors affecting the development and evolution of the microstructure produced by ECA pressing. Optimization of such factors is then presented for the advent of superplasticity.

  15. Bending strength studies on hot-pressed silicon carbide

    NASA Technical Reports Server (NTRS)

    Kriegesmann, J.

    1984-01-01

    The 4-point bending strength of 4 grades of hot-pressed SiC was determined at different temperatures. With a transgranular mode of fracture the values for bending strength are retained up to high temperatures. For intergranular fracture the decrease of strength is governed by subcritical crack growth. The intergranular fracture is caused by a high content of silicate glassy phase at the grain boundaries of hot-pressed SiC.

  16. Binderless briquetting of coals and biomass in roll press

    SciTech Connect

    Komarek, R.K.

    1996-12-31

    An analysis of the stresses in compacted materials was employed to investigate methods which can improve briquettability of coal and biomass in roll press. The special roll face design, four roll press, as well as special hot briquetting installation were tested. Experimental results are given for several different briquetted materials. In the last section of the paper, the advantages of this process as well as possibilities for commercial application are discussed.

  17. Bench-scale studies on gasification of biomass in the presence of catalysts

    SciTech Connect

    Mudge, L.K.; Baker, E.G.; Brown, M.D.; Wilcox, W.A.

    1987-11-01

    This report summarizes the results of bench-scale studies on the development of catalysts for conversion of biomass to specific gas products. The primary objective of these studies was to define operating conditions that allow long lifetimes for secondary catalysts used in biomass gasification. Nickel-based catalysts that were found to be active for conversion of wood to synthesis gases in previous studies were evaluated. These catalysts remained active indefinitely in laboratory studies but lost activity rapidly when evaluated in a process research unit. Bench-scale equipment was designed and installed to resolve the differences between laboratory and PRU results. Primary catalysts (alkali carbonates) were also evaluated for their effectiveness in improving conversion yields from biomass gasification. 21 refs., 27 figs., 19 tabs.

  18. Optical test-benches for multiple source wavefront propagation and spatiotemporal point-spread function emulation.

    PubMed

    Weddell, Stephen J; Lambert, Andrew J

    2014-12-10

    Precise measurement of aberrations within an optical system is essential to mitigate combined effects of user-generated aberrations for the study of anisoplanatic imaging using optical test benches. The optical system point spread function (PSF) is first defined, and methods to minimize the effects of the optical system are discussed. User-derived aberrations, in the form of low-order Zernike ensembles, are introduced using a liquid crystal spatial light modulator (LC-SLM), and dynamic phase maps are used to study the spatiotemporal PSF. A versatile optical test bench is described, where the Shack Hartmann and curvature wavefront sensors are used to emulate the effects of wavefront propagation over time from two independent sources. PMID:25608061

  19. A vibration monitoring acquisition and diagnostic system for helicopter drive train bench tests

    NASA Astrophysics Data System (ADS)

    Dousis, Dimitri A.

    An automated drive train test stand vibration monitoring system called VMADS has been developed by Bell Helicopter Textron, Inc., and has been installed at Bell's transmission bench test facility. VMADS provides the operator with warning and alarm indications for preselected degraded conditions, and acquires vibration data to be used by engineers to improve the diagnostics for better fault detection and fault isolation. VMADS is used as a test bed for new monitoring and diagnostic algorithm evaluation and validation, a necessary step to ensure development of accurate, reliable integrated health usage monitoring systems for the Bell rotorcraft fleet. This paper highlights the VMADS features for helicopter and tiltrotor aircraft drive train bench test monitoring and diagnostics and discusses supportive ongoing health and usage monitoring activities at BHTI, both military and commercial for enhanced safety and reduced maintenance costs. Bell is translating VMADS developed capability to airborne applications, while simultaneously enhancing the original VMADS capabilities.

  20. Integration of a UV curable polymer lens and MUMPs structures on a SOI optical bench

    NASA Astrophysics Data System (ADS)

    Hsieh, Jerwei; Hsiao, Sheng-Yi; Lai, Chun-Feng; Fang, Weileun

    2007-08-01

    This work presents the design concept of integrating a polymer lens, poly-Si MUMPs and single-crystal-silicon HARM structures on a SOI wafer to form a silicon optical bench. This approach enables the monolithic integration of various optical components on the wafer so as to improve the design flexibility of the silicon optical bench. Fabrication processes, including surface and bulk micromachining on the SOI wafer, have been established to realize bi-convex spherical polymer lenses with in-plane as well as out-of-plane optical axes. In addition, a micro device consisting of an in-plane polymer lens, a thick fiber holder and a mechanical shutter driven by an electrothermal actuator is also demonstrated using the present approach. In summary, this study significantly improves the design flexibility as well as the functions of SiOBs.

  1. ComprehensiveBench: a Benchmark for the Extensive Evaluation of Global Scheduling Algorithms

    NASA Astrophysics Data System (ADS)

    Pilla, Laércio L.; Bozzetti, Tiago C.; Castro, Márcio; Navaux, Philippe O. A.; Méhaut, Jean-François

    2015-10-01

    Parallel applications that present tasks with imbalanced loads or complex communication behavior usually do not exploit the underlying resources of parallel platforms to their full potential. In order to mitigate this issue, global scheduling algorithms are employed. As finding the optimal task distribution is an NP-Hard problem, identifying the most suitable algorithm for a specific scenario and comparing algorithms are not trivial tasks. In this context, this paper presents ComprehensiveBench, a benchmark for global scheduling algorithms that enables the variation of a vast range of parameters that affect performance. ComprehensiveBench can be used to assist in the development and evaluation of new scheduling algorithms, to help choose a specific algorithm for an arbitrary application, to emulate other applications, and to enable statistical tests. We illustrate its use in this paper with an evaluation of Charm++ periodic load balancers that stresses their characteristics.

  2. Steam Reforming, 6-in. Bench-Scale Design and Testing Project -- Technical and Functional Requirements Description

    SciTech Connect

    Losinski, Sylvester John; Marshall, Douglas William

    2002-08-01

    Feasibility studies and technology development work are currently being performed on several processes to treat radioactive liquids and solids currently stored at the Idaho Nuclear Technology and Engineering Center (INTEC), located within the Idaho National Engineering and Environmental Laboratory (INEEL). These studies and development work will be used to select a treatment process for treatment of the radioactive liquids and solids to meet treatment milestones of the Settlement Agreement between the Department of Energy and the State of Idaho. One process under consideration for treating the radioactive liquids and solids, specifically Sodium-Bearing Waste (SBW) and tank heel solids, is fluid bed steam reforming (FBSR). To support both feasibility and development studies a bench-scale FBSR is being designed and constructed. This report presents the technical and functional requirements, experimental objectives, process flow sheets, and equipment specifications for the bench-scale FBSR.

  3. Proposed SLR Optical Bench Required to Track Debris Using 1550 nm Lasers

    NASA Technical Reports Server (NTRS)

    Shappirio, M.; Coyle, D. B.; McGarry, J. F.; Bufton, J.; Cheek, J. W.; Clarke, G.; Hull, S. M.; Skillman, D. R.; Stysley, P. R.; Sun, X.; Young, R. P.; Zagwodzki, T.

    2015-01-01

    A previous study has indicated that by using approx.1550 nm wavelengths a laser ranging system can track debris objects in an "eye safe" manner, while increasing the expected return rate by a factor of approx. 2/unit area of the telescope. In this presentation we develop the optical bench required to use approx.1550nm lasers, and integration with a 532nm system. We will use the optical bench configuration for NGSLR as the baseline, and indicate a possible injection point for the 1550 nm laser. The presentation will include what elements may need to be changed for transmitting the required power on the approx.1550nm wavelength, supporting the alignment of the laser to the telescope, and possible concerns for the telescope optics.

  4. Setup of a photomultiplier tube test bench for LHAASO-KM2A

    NASA Astrophysics Data System (ADS)

    Wang, Xu; Zhang, Zhong-Quan; Tian, Ye; Du, Yan-Yan; Zhao, Xiao; Shen, Fu-Wang; Li, Chang-Yu; Sun, Yan-Sheng; Feng, Cun-Feng

    2016-08-01

    To fulfill the requirements for testing the photomultiplier tubes (PMTs) of the electromagnetic detector at the Large High Altitude Air Shower Observatory (LHAASO), a multi-functional PMT test bench with a two-dimensional scanning system has been developed. With this 2D scanning system, 16 PMTs can be scanned simultaneously for characteristics tests, including uniformity, cathode transit time difference, single photo-electron spectrum, gain vs. high voltage, linear behavior and dark noise. The programmable hardware and intelligent software of the test bench make it convenient to use and provide reliable results. The test methods are described in detail and primary results are presented. Supported by NSFC (11075096) SDNFS (ZR2011AM007), China

  5. Data Acquisition System for Electric Vehicle's Driving Motor Test Bench Based on VC++

    NASA Astrophysics Data System (ADS)

    Qiang, Song; Chenguang, Lv

    In order to solve such problems as great labor intensity, high cost, low efficiency and accuracy during the performance experiment for driving motor system of electric vehicles, and realize data acquisition automatically and synchronously, a data acquisition system for driving motor test bench based on visual instruments is designed. This data acquisition system can be used to obtain the driving motor's parameters of currents and voltages at the same time. This system's hardware is based on electric vehicle's motor test bench in Beijing Institute of Technology, and combined with PXI2010 data acquisition card from ADLINK Company. Visual c++ software is adopted as development tool. In this paper, the design and realization of the hardware and software are presented. Experiment results show that this system improves the efficiency and quality of testing task with high utility. And experiment data can be obtained accurately.

  6. Direct liquefaction proof-of-concept program: Bench Run 05 (227-97). Final report

    SciTech Connect

    Comolli, A.G.; Pradhan, V.R.; Lee, T.L.K.; Karolkiewicz, W.F.; Popper, G.

    1997-04-01

    This report presents the results Bench Run PB-05, conducted under the DOE Proof of Concept - Bench Option Program in direct coal liquefaction at Hydrocarbon Technologies, Inc. in Lawrenceville, New Jersey. Bench Run PB-05 was the fifth of the nine runs planned in the POC Bench Option Contract between the U.S. DOE and included the evaluation of the effect of using dispersed slurry catalyst in direct liquefaction of a high volatile bituminous Illinois No. 6 coal and in combined coprocessing of coal with organic wastes, such as heavy petroleum resid, MSW plastics, and auto-shredder residue. PB-05 employed a two-stage, back-mixed, slurry reactor system with an interstage V/L separator and an in-line fixed-bed hydrotreater. Coprocessing of waste plastics with Illinois No. 6 coal did not result in the improvement observed earlier with a subbituminous coal. In particular, decreases in light gas yield and hydrogen consumption were not observed with Illinois No. 6 coal as they were with Black Thunder Mine coal. The higher thermal severity during PB-05 is a possible reason for this discrepancy, plastics being more sensitive to temperatures (cracking) than either coal or heavy resid. The ASR material was poorer than MSW plastics in terms of increasing conversions and yields. HTI`s new dispersed catalyst formulation, containing phosphorus-promoted iron gel, was highly effective for the direct liquefaction of Illinois No. 6 coal under the reaction conditions employed; over 95% coal conversion was obtained, along with over 85% residuum conversion and over 73% distillate yields.

  7. A Lightweight, Precision-Deployable, Optical Bench for High Energy Astrophysics Missions

    NASA Astrophysics Data System (ADS)

    Danner, Rolf; Dailey, D.; Lillie, C.

    2011-09-01

    The small angle of total reflection for X-rays, forcing grazing incidence optics with large collecting areas to long focal lengths, has been a fundamental barrier to the advancement of high-energy astrophysics. Design teams around the world have long recognized that a significant increase in effective area beyond Chandra and XMM-Newton requires either a deployable optical bench or separate X-ray optics and instrument module on formation flying spacecraft. Here, we show that we have in hand the components for a lightweight, precision-deployable optical bench that, through its inherent design features, is the affordable path to the next generation of imaging high-energy astrophysics missions. We present our plans for a full-scale engineering model of a deployable optical bench for Explorer-class missions. We intend to use this test article to raise the technology readiness level (TRL) of the tensegrity truss for a lightweight, precision-deployable optical bench for high-energy astrophysics missions from TRL 3 to TRL 5 through a set of four well-defined technology milestones. The milestones cover the architecture's ability to deploy and control the focal point, characterize the deployed dynamics, determine long-term stability, and verify the stowed load capability. Our plan is based on detailed design and analysis work and the construction of a first prototype by our team. Building on our prior analysis and the high TRL of the architecture components we are ready to move on to the next step. The key elements to do this affordably are two existing, fully characterized, flight-quality, deployable booms. After integrating them into the test article, we will demonstrate that our architecture meets the deployment accuracy, adjustability, and stability requirements. The same test article can be used to further raise the TRL in the future.

  8. Data acquisition system time measurement capabilities using WorkBench[trademark] software

    SciTech Connect

    Coutts, D.A.

    1992-04-01

    There is an increasing interest in the ability to measure transient behavior in the Heat Transfer Laboratory (HTL). To accomplish this the timing system behavior for the Data Acquisition Systems (DAS) must be evaluated. This report discusses the evaluation of a DAS timing system using WorkBench[trademark] Software in a Macintosh II environment. It also describes a method which can be successfully used to calibrate the timing system associated with the DAS.

  9. Data acquisition system time measurement capabilities using WorkBench{trademark} software

    SciTech Connect

    Coutts, D.A.

    1992-04-01

    There is an increasing interest in the ability to measure transient behavior in the Heat Transfer Laboratory (HTL). To accomplish this the timing system behavior for the Data Acquisition Systems (DAS) must be evaluated. This report discusses the evaluation of a DAS timing system using WorkBench{trademark} Software in a Macintosh II environment. It also describes a method which can be successfully used to calibrate the timing system associated with the DAS.

  10. Dual-Band Optical Bench for Terahertz Radiometer for Outer Planet Atmospheres (TROPA)

    NASA Technical Reports Server (NTRS)

    Schlecht, Erich; Jamnejad, Vahraz

    2012-01-01

    We have developed a wide-band dual frequency spectrometer for use in deep space planetary atmospheric spectroscopy. The instrument uses a dual-band architecture, both to be able to observe spectral lines from a wide range of atmospheric species, and to allow a higher precision retrieval of temperature/pressure/partial pressure and wind profiles. This dual-band approach requires a new design for the optical bench to couple both frequencies into their respective receivers.

  11. STS-26 crewmembers participate in bench review at offsite Boeing Bldg

    NASA Technical Reports Server (NTRS)

    1988-01-01

    STS-26 Discovery, Orbiter Vehicle (OV) 103, crewmembers participate in bench review at the offsite Boeing Building. Commander Frederick H. Hauck reviews a checklist of necessary supplies with Flight Equipment Processing engineer Laura E. Duvall. Pilot Richard O. Covey makes notations on checklist in background. Hygiene supplies (razors, deodorants, brushes, combs, etc.) are displayed on table behind Hauck. Photograph was taken by Keith Meyers of the NEW YORK TIMES.

  12. STS-26 crewmembers participate in bench review at offsite Boeing Bldg

    NASA Technical Reports Server (NTRS)

    1988-01-01

    STS-26 Discovery, Orbiter Vehicle (OV) 103, crewmembers participate in bench review at the offsite Boeing Building. Left to right Mission Specialist (MS) David C. Hilmers, MS George D. Nelson, Commander Frederick H. Hauck, and Pilot Richard O. Covey, holding clipboards with checklists, look over hygiene supplies (razors, deodorants, tooth paste, etc.). Flight Equipment Processing engineer Laura E. Duvall, standing behind crew members, waits to lend a hand in the 'shopping spree'. Photograph was taken by Keith Meyers of the NEW YORK TIMES.

  13. Are the benches at Mormon Point, Death Valley, California, USA, scarps or strandlines?

    USGS Publications Warehouse

    Knott, J.R.; Tinsley, J. C., III; Wells, S.G.

    2002-01-01

    The benches and risers at Mormon Point, Death Valley, USA, have long been interpreted as strandlines cut by still-stands of pluvial lakes correlative with oxygen isotope stage (OIS) 5e/6 (120,000-186,000 yr B.P.) and OIS-2 (10,000-35,000 yr B.P.). This study presents geologic mapping and geomorphic analyses (Gilbert's criteria, longitudinal profiles), which indicate that only the highest bench at Mormon Point (~90 m above mean sea level (msl)) is a lake strandline. The other prominent benches on the north-descending slope immediately below this strandline are interpreted as fault scarps offsetting a lacustrine abrasion platform. The faults offsetting the abrasion platform most likely join downward into and slip sympathetically with the Mormon Point turtleback fault, implying late Quaternary slip on this low-angle normal fault. Our geomorphic reinterpretation implies that the OIS-5e/6 lake receded rapidly enough not to cut strandlines and was ~90 m deep. Consistent with independent core studies of the salt pan, no evidence of OIS-2 lake strandlines was found at Mormon Point, which indicates that the maximum elevation of the OIS-2 lake surface was -30 m msl. Thus, as measured by pluvial lake depth, the OIS-2 effective precipitation was significantly less than during OIS-5e/6, a finding that is more consistent with other studies in the region. The changed geomorphic context indicates that previous surface exposure dates on fault scarps and benches at Mormon Point are uninterpretable with respect to lake history. ?? 2002 University of Washington.

  14. Characterization of a graphite epoxy optical bench during thermal vacuum cycling

    NASA Technical Reports Server (NTRS)

    Hansen, Patricia A.; Jenkins, Teresa K.; Maag, Carl R.; Taylor, Daniel M.

    1988-01-01

    In-situ monitoring of the Wide-Field/Planetary Camera, a Hubble Space Telescope science instrument, was performed in a vacuum environment to better understand the formation of ice on cooled optical detectors. Several diagnostic instruments were mounted on an access plate to view the interior of the instrument housing and the graphite epoxy optical bench. The instrumentation chosen and the rationale for choosing the instrumentation are discussed. In addition, the performance of the instrumentation during monitoring operations is discussed.

  15. From bench to FDA to bedside: US regulatory trends for new stem cell therapies.

    PubMed

    Knoepfler, Paul S

    2015-03-01

    The phrase "bench-to-bedside" is commonly used to describe the translation of basic discoveries such as those on stem cells to the clinic for therapeutic use in human patients. However, there is a key intermediate step in between the bench and the bedside involving governmental regulatory oversight such as by the Food and Drug Administration (FDA) in the United States (US). Thus, it might be more accurate in most cases to describe the stem cell biological drug development process in this way: from bench to FDA to bedside. The intermediate development and regulatory stage for stem cell-based biological drugs is a multifactorial, continually evolving part of the process of developing a biological drug such as a stem cell-based regenerative medicine product. In some situations, stem cell-related products may not be classified as biological drugs in which case the FDA plays a relatively minor role. However, this middle stage is generally a major element of the process and is often colloquially referred to in an ominous way as "The Valley of Death". This moniker seems appropriate because it is at this point, and in particular in the work that ensues after Phase 1, clinical trials that most drug product development is terminated, often due to lack of funding, diseases being refractory to treatment, or regulatory issues. Not surprisingly, workarounds to deal with or entirely avoid this difficult stage of the process are evolving both inside and outside the domains of official regulatory authorities. In some cases these efforts involve the FDA invoking new mechanisms of accelerating the bench to beside process, but in other cases these new pathways bypass the FDA in part or entirely. Together these rapidly changing stem cell product development and regulatory pathways raise many scientific, ethical, and medical questions. These emerging trends and their potential consequences are reviewed here. PMID:25489841

  16. Precision-Deployable, Stable, Optical Benches for Cost-Effective Space Telescopes

    NASA Astrophysics Data System (ADS)

    Danner, Rolf; Pellegrino, S.; Dailey, D.; Marks, G.; Bookbinder, J.

    2012-05-01

    To explore the universe at the arcsecond resolution of Chandra, while increasing collecting area by at least an order of magnitude and maintaining affordability, we will need to make creative use of existing and new technology. Precision-deployable, stable, optical benches that fit inside smaller, lower-cost launch vehicles are a prime example of a technology well within current reach that will yield breakthrough benefits for future astrophysics missions. Deployable optical benches for astrophysical applications have a reputation for complexity; however, we are offering an approach, based on techniques used in space for decades, that reduces overall mission cost. Currently, deployable structures are implemented on JAXA’s Astro-H and NASA’s NuStar high-energy astrophysics missions. We believe it is now time to evolve these structures into precision, stable optical benches that are stiff, lightweight, and suitable for space telescopes with focal lengths of 20 meters or more. Such optical benches are required for advanced observatory class missions and can be scaled to Explorer and medium-class missions. To this end, we have formed a partnership between Space Structures Laboratory (SSL) at the California Institute of Technology, Northrop Grumman Aerospace Systems (NGAS), Northrop Grumman Astro Aerospace (Astro), and Smithsonian Astrophysical Observatory (SAO). Combining the expertise and tools from academia and industry is the most effective approach to take this concept to Technology Readiness Level (TRL) 6. We plan to perform small sub-scale demonstrations, functional tests, and analytical modeling in the academic environment. Using results from SSL, larger prototypes will be developed at facilities at NGAS in Redondo Beach and Carpinteria, CA.

  17. Cavitation Enhancing Nanodroplets Mediate Efficient DNA Fragmentation in a Bench Top Ultrasonic Water Bath

    PubMed Central

    Malc, Ewa P.; Jayakody, Chatura N.; Tsuruta, James K.; Mieczkowski, Piotr A.; Janzen, William P.; Dayton, Paul A.

    2015-01-01

    A perfluorocarbon nanodroplet formulation is shown to be an effective cavitation enhancement agent, enabling rapid and consistent fragmentation of genomic DNA in a standard ultrasonic water bath. This nanodroplet-enhanced method produces genomic DNA libraries and next-generation sequencing results indistinguishable from DNA samples fragmented in dedicated commercial acoustic sonication equipment, and with higher throughput. This technique thus enables widespread access to fast bench-top genomic DNA fragmentation. PMID:26186461

  18. Are the Benches at Mormon Point, Death Valley, California, USA, Scarps or Strandlines?

    NASA Astrophysics Data System (ADS)

    Knott, Jeffrey R.; Tinsley, John C.; Wells, Stephen G.

    2002-11-01

    The benches and risers at Mormon Point, Death Valley, USA, have long been interpreted as strandlines cut by still-stands of pluvial lakes correlative with oxygen isotope stage (OIS) 5e/6 (120,000-186,000 yr B.P.) and OIS-2 (10,000-35,000 yr B.P.). This study presents geologic mapping and geomorphic analyses (Gilbert's criteria, longitudinal profiles), which indicate that only the highest bench at Mormon Point (˜90 m above mean sea level (msl)) is a lake strandline. The other prominent benches on the north-descending slope immediately below this strandline are interpreted as fault scarps offsetting a lacustrine abrasion platform. The faults offsetting the abrasion platform most likely join downward into and slip sympathetically with the Mormon Point turtleback fault, implying late Quaternary slip on this low-angle normal fault. Our geomorphic reinterpretation implies that the OIS-5e/6 lake receded rapidly enough not to cut strandlines and was ˜90 m deep. Consistent with independent core studies of the salt pan, no evidence of OIS-2 lake strandlines was found at Mormon Point, which indicates that the maximum elevation of the OIS-2 lake surface was -30 m msl. Thus, as measured by pluvial lake depth, the OIS-2 effective precipitation was significantly less than during OIS-5e/6, a finding that is more consistent with other studies in the region. The changed geomorphic context indicates that previous surface exposure dates on fault scarps and benches at Mormon Point are uninterpretable with respect to lake history.

  19. Design and fabrication of a glovebox for the Plasma Hearth Process radioactive bench-scale system

    SciTech Connect

    Wahlquist, D.R.

    1996-07-01

    This paper presents some of the design considerations and fabrication techniques for building a glovebox for the Plasma Hearth Process (PHP) radioactive bench-scale system. The PHP radioactive bench-scale system uses a plasma torch to process a variety of radioactive materials into a final vitrified waste form. The processed waste will contain plutonium and trace amounts of other radioactive materials. The glovebox used in this system is located directly below the plasma chamber and is called the Hearth Handling Enclosure (HHE). The HHE is designed to maintain a confinement boundary between the processed waste and the operator. Operations that take place inside the HHE include raising and lowering the hearth using a hydraulic lift table, transporting the hearth within the HHE using an overhead monorail and hoist system, sampling and disassembly of the processed waste and hearth, weighing the hearth, rebuilding a hearth, and sampling HEPA filters. The PHP radioactive bench-scale system is located at the TREAT facility at Argonne National Laboratory-West in Idaho Falls, Idaho.

  20. Thermal inactivation of Bacillus anthracis surrogate spores in a bench-scale enclosed landfill gas flare.

    PubMed

    Tufts, Jenia A McBrian; Rosati, Jacky A

    2012-02-01

    A bench-scale landfill flare system was designed and built to test the potential for landfilled biological spores that migrate from the waste into the landfill gas to pass through the flare and exit into the environment as viable. The residence times and temperatures of the flare were characterized and compared to full-scale systems. Geobacillus stearothermophilus and Bacillus atrophaeus, nonpathogenic spores that may serve as surrogates for Bacillus anthracis, the causative agent for anthrax, were investigated to determine whether these organisms would be inactivated or remain viable after passing through a simulated landfill flare. High concentration spore solutions were aerosolized, dried, and sent through a bench-scale system to simulate the fate of biological weapon (BW)-grade spores in a landfill gas flare. Sampling was conducted downstream of the flare using a bioaerosol collection device containing sterile white mineral oil. The samples were cultured, incubated for seven days, and assessed for viability. Results showed that the bench-scale system exhibited good similarity to the real-world conditions of an enclosed standard combustor flare stack with a single orifice, forced-draft diffusion burner. All spores of G. stearothermophilus and B. atrophaeus were inactivated in the flare, indicating that spores that become re-entrained in landfill gas may not escape the landfill as viable, apparently becoming completely inactivated as they exit through a landfill flare. PMID:22442931

  1. Bench Models for Assessing the Mechanics of Mitral Valve Repair and Percutaneous Surgery.

    PubMed

    Siefert, Andrew W; Siskey, Ryan L

    2015-06-01

    Rapid preclinical evaluations of mitral valve (MV) mechanics are currently best facilitated by bench models of the left ventricle (LV). This review aims to provide a comprehensive assessment of these models to aid interpretation of their resulting data, inform future experimental evaluations, and further the translation of results to procedure and device development. For this review, two types of experimental bench models were evaluated. Rigid LV models were characterized as fluid-mechanical systems capable of testing explanted MVs under static and or pulsatile left heart hemodynamics. Passive LV models were characterized as explanted hearts whose left side is placed in series with a static or pulsatile flow-loop. In both systems, MV function and mechanics can be quantitatively evaluated. Rigid and passive LV models were characterized and evaluated. The materials and methods involved in their construction, function, quantitative capabilities, and disease modeling were described. The advantages and disadvantages of each model are compared to aid the interpretation of their resulting data and inform future experimental evaluations. Repair and percutaneous studies completed in these models were additionally summarized with perspective on future advances discussed. Bench models of the LV provide excellent platforms for quantifying MV repair mechanics and function. While exceptional work has been reported, more research and development is necessary to improve techniques and devices for repair and percutaneous surgery. Continuing efforts in this field will significantly contribute to the further development of procedures and devices, predictions of long-term performance, and patient safety. PMID:26577235

  2. Bench-scale studies of in-duct mercury capture using cupric chloride-impregnated carbons

    SciTech Connect

    Sang-Sup Lee; Joo-Youp Lee; Tim C. Keener

    2009-04-15

    A brominated activated carbon (Darco Hg-LH) and cupric chloride-impregnated activated carbon (CuCl{sub 2}-ACs) sorbent have been tested in a bench-scale entrained-flow reactor system which was developed for simulating in-flight mercury capture in ducts upstream of particulate matter control devices. The bench-scale experimental system has been operated with the conditions of a residence time of 0.75 s and a gas temperature of 140{sup o}C to simulate typical conditions in the duct of coal-fired exhaust gas. In addition, sorbent deposition on walls which can occur in a laboratory-scale system more than in a full-scale system was significantly reduced so that additional mercury capture by the deposited sorbent was minimized. In the entrained-flow system, CuCl{sub 2}-ACs demonstrated similar performance in Hg adsorption and better performance in Hg{sup 0} oxidation than Darco Hg-LH. In addition, the carbon content of those sorbents was found to determine their Hg adsorption capability in the entrained-flow system. The bench-scale entrained-flow system was able to demonstrate the important Hg adsorption and oxidation characteristics of the tested sorbents. 18 refs., 9 figs., 1 tab.

  3. Interferometric 30 m bench for calibrations of 1D scales and optical distance measuring instruments

    NASA Astrophysics Data System (ADS)

    Unkuri, J.; Rantanen, A.; Manninen, J.; Esala, V.-P.; Lassila, A.

    2012-09-01

    During construction of a new metrology building for MIKES, a 30 m interferometric bench was designed. The objective was to implement a straight, stable, adjustable and multifunctional 30 m measuring bench for calibrations. Special attention was paid to eliminating the effects of thermal expansion and inevitable concrete shrinkage. The linear guide, situated on top of a monolithic concrete beam, comprises two parallel round shafts with adjustable fixtures every 1 m. A carriage is moved along the rail and its position is followed by a reference interferometer. Depending on the measurement task, one or two retro-reflectors are fixed on the carriage. A microscope with a CCD camera and a monitor can be used to detect line mark positions on different line standards. When calibrating optical distance measuring instruments, various targets can be fixed to the carriage. For the most accurate measurements an online Abbe-error correction based on simultaneous carriage pitch measurement by a separate laser interferometer is applied. The bench is used for calibrations of machinist scales, tapes, circometers, electronic distance meters, total stations and laser trackers. The estimated expanded uncertainty for 30 m displacement for highest accuracy calibrations is 2.6 µm.

  4. Embedded Sensors and Controls to Improve Component Performance and Reliability -- Bench-scale Testbed Design Report

    SciTech Connect

    Melin, Alexander M.; Kisner, Roger A.; Drira, Anis; Reed, Frederick K.

    2015-09-01

    Embedded instrumentation and control systems that can operate in extreme environments are challenging due to restrictions on sensors and materials. As a part of the Department of Energy's Nuclear Energy Enabling Technology cross-cutting technology development programs Advanced Sensors and Instrumentation topic, this report details the design of a bench-scale embedded instrumentation and control testbed. The design goal of the bench-scale testbed is to build a re-configurable system that can rapidly deploy and test advanced control algorithms in a hardware in the loop setup. The bench-scale testbed will be designed as a fluid pump analog that uses active magnetic bearings to support the shaft. The testbed represents an application that would improve the efficiency and performance of high temperature (700 C) pumps for liquid salt reactors that operate in an extreme environment and provide many engineering challenges that can be overcome with embedded instrumentation and control. This report will give details of the mechanical design, electromagnetic design, geometry optimization, power electronics design, and initial control system design.

  5. DATA QUALITY OBJECTIVES FOR SELECTING WASTE SAMPLES FOR BENCH-SCALE REFORMER TREATABILITY STUDIES

    SciTech Connect

    BANNING DL

    2011-02-11

    This document describes the data quality objectives to select archived samples located at the 222-S Laboratory for Bench-Scale Reforming testing. The type, quantity, and quality of the data required to select the samples for Fluid Bed Steam Reformer testing are discussed. In order to maximize the efficiency and minimize the time to treat Hanford tank waste in the Waste Treatment and Immobilization Plant, additional treatment processes may be required. One of the potential treatment processes is the fluidized bed steam reformer. A determination of the adequacy of the fluidized bed steam reformer process to treat Hanford tank waste is required. The initial step in determining the adequacy of the fluidized bed steam reformer process is to select archived waste samples from the 222-S Laboratory that will be used in a bench scale tests. Analyses of the selected samples will be required to confirm the samples meet the shipping requirements and for comparison to the bench scale reformer (BSR) test sample selection requirements.

  6. High power continuous wave microwave test bench at 4.6 GHz for experimental advanced superconducting tokamak.

    PubMed

    Ma, Wendong; Hu, Huaichuan; Shan, Jiafang; Xu, Handong; Wang, Mao; Wu, Zege; Zhu, Liang

    2013-01-01

    The lower hybrid current drive (LHCD) is an effective approach for auxiliary heating and non-inductive current drive in the experimental advanced superconducting tokamak. The 6 MW/4.6 GHz LHCD system is being designed and installed with twenty-four 250 KW/4.6 GHz high power klystron amplifiers. The test bench operating at 250 KW/4.6 GHz in continuous wave mode has been set up, which can test and train microwave components for the 6 MW/4.6 GHz LHCD system. In this paper, the system architecture and software of the microwave test bench are presented. Moreover, the test results of these klystrons and microwave units are described here in detail. The long term operation of the test bench and improved performance of all microwave component samples indicated that the related technologies on test bench can be applied in the large scale LHCD systems. PMID:23387646

  7. Medicinal plant knowledge of the Bench ethnic group of Ethiopia: an ethnobotanical investigation

    PubMed Central

    2009-01-01

    Background Plants have traditionally been used as a source of medicine in Ethiopia since early times for the control of various ailments afflicting humans and their domestic animals. However, little work has been made in the past to properly document and promote the knowledge. Today medicinal plants and the associated knowledge in the country are threatened due to deforestation, environmental degradation and acculturation. Urgent ethnobotanical studies and subsequent conservation measures are, therefore, required to salvage these resources from further loss. The purpose of the present study was to record and analyse traditional medicinal plant knowledge of the Bench ethnic group in Southwest Ethiopia. Methods Semi-structured interviews were conducted with Bench informants selected during transect walks made to houses as well as those identified as knowledgeable by local administrators and elders to gather data regarding local names of medicinal plants used, parts harvested, ailments treated, remedy preparation methods, administration routes, dosage and side effects. The same method was also employed to gather information on marketability, habitat and abundance of the reported medicinal plants. Purposive sampling method was used in the selection of study sites within the study district. Fidelity Level (FL) value was calculated for each claimed medicinal plant to estimate its healing potential. Results The study revealed 35 Bench medicinal plants: 32 used against human ailments and three to treat both human and livestock ailments. The majority of Bench medicinal plants were herbs and leaf was the most frequently used part in the preparation of remedies. Significantly higher average number of medicinal plants was claimed by men, older people and illiterate ones as compared to women, younger people and literate ones, respectively. The majority of the medicinal plants used in the study area were uncultivated ones. Conclusion The study revealed acculturation as the major

  8. Development of a pyramidal wavefront sensor test-bench at INO

    NASA Astrophysics Data System (ADS)

    Turbide, Simon; Wang, Min; Gauvin, Jonny; Martin, Olivier; Savard, Maxime; Bourqui, Pascal; Veran, Jean-Pierre; Deschenes, William; Anctil, Genevieve; Chateauneuf, François

    2013-12-01

    The key technical element of the adaptive optics in astronomy is the wavefront sensing (WFS). One of the advantages of the pyramid wavefront sensor (P-WFS) over the widely used Shack-Hartmann wavefront sensor seems to be the increased sensitivity in closed-loop applications. A high-sensitivity and large dynamic-range WFS, such as P-WFS technology, still needs to be further investigated for proper justification in future Extremely Large Telescopes application. At INO, we have recently carried out the optical design, testing and performance evaluation of a P-WFS bench setup. The optical design of the bench setup mainly consists of the super-LED fiber source, source collimator, spatial light modulator (SLM), relay lenses, tip-tilt mirror, Fourier-transforming lens, and a four-faceted glass pyramid with a large vertex angle as well as pupil re-imaged optics. The phase-only SLM has been introduced in the bench setup to generate atmospheric turbulence with a maximum phase shift of more than 2π at each pixel (256 grey levels). Like a modified Foucault knife-edge test, the refractive pyramid element is used to produce four images of the entrance pupil on a CCD camera. The Fourier-transforming lens, which is used before the pyramid prism, is designed for telecentric output to allow dynamic modulation (rotation of the beam around the pyramid-prism center) from a tip-tilt mirror. Furthermore, a P-WFS diffraction-based model has been developed. This model includes most of the system limitations such as the SLM discrete voltage steps and the CCD pixel pitch. The pyramid effects (edges and tip) are considered as well. The modal wavefront reconstruction algorithm relies on the construction of an interaction matrix (one for each modulation's amplitude). Each column of the interaction matrix represents the combination of the four pupil images for a given wavefront aberration. The nice agreement between the data and the model suggest that the limitation of the system is not the P

  9. 22 CFR 9b.1 - Press access to the Department of State.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Press access to the Department of State. 9b.1 Section 9b.1 Foreign Relations DEPARTMENT OF STATE GENERAL REGULATIONS GOVERNING DEPARTMENT OF STATE PRESS BUILDING PASSES § 9b.1 Press access to the Department of State. (a) Media correspondents without valid Department of State press building...

  10. An Update of Freedom of the Press and Information in Latin America and the Caribbean.

    ERIC Educational Resources Information Center

    Garrison, Bruce; Munoz, Julio E.

    This paper is based on a review of the literature that included reports from the Inter-American Press Association's general assembly in Los Angeles in October 1984, the mid-year meeting of the Inter-American Press Association in Panama City in March 1985, and the 1983 world press freedom review of the International Press Institute. Other material…

  11. 22 CFR 9b.1 - Press access to the Department of State.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Press access to the Department of State. 9b.1 Section 9b.1 Foreign Relations DEPARTMENT OF STATE GENERAL REGULATIONS GOVERNING DEPARTMENT OF STATE PRESS BUILDING PASSES § 9b.1 Press access to the Department of State. (a) Media correspondents without valid Department of State press building...

  12. 22 CFR 9b.1 - Press access to the Department of State.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Press access to the Department of State. 9b.1 Section 9b.1 Foreign Relations DEPARTMENT OF STATE GENERAL REGULATIONS GOVERNING DEPARTMENT OF STATE PRESS BUILDING PASSES § 9b.1 Press access to the Department of State. (a) Media correspondents without valid Department of State press building...

  13. A Study on the Specifications of Cold Pressed Colza Oil.

    PubMed

    Yazdani-Nasab, Zahra; Piravi-Vanak, Zahra

    2015-01-01

    Cold pressed oil extraction is the preferred method for seeds with high contents of oil, such as colza. Generally speaking, expeller pressing is less complex, more cost efficient and safer than solvent extraction. Moreover, cold pressed oils retain their natural properties better. Cold pressed colza oil has been found to have numerous health benefits. This was an original and unique study conducted as part of the research for the international Codex standard for cold pressed fats and oils, and aims to examine the chemical properties of two varieties of Iranian colza seed, Hyola and Okapi. The studied factors included (a) chemical properties, and (b) physicochemical and quality characteristics. Based on our findings, both varieties of colza seeds in this study had satisfactory levels of oleic and linoleic acid, and no trans-fatty acids. Although both samples had good nutritional properties, the Hyola variety was higher in oleic acid, indicating better oxidative stability. Due to the considerable amounts of β-sitosterol in both varieties, they may be effective in reducing cholesterol and preventing cancer. PMID:26043928

  14. Bilberry and bilberry press cake as sources of dietary fibre

    PubMed Central

    Aura, Anna-Marja; Holopainen-Mantila, Ulla; Sibakov, Juhani; Kössö, Tuija; Mokkila, Mirja; Kaisa, Poutanen

    2015-01-01

    Background Dietary recommendations for Nordic countries urge the use of plant foods as a basis for healthy nutrition. Currently, the level of dietary fibre (DF) intake is not adequate. Berries are an elementary part of the recommended Nordic healthy diet and could be consumed in higher amounts. Materials and methods Finnish bilberries and a bilberry press cake from juice processing were studied for DF content, carbohydrate composition, and non-carbohydrate fibre content, which was analysed as sulphuric acid insoluble and soluble material. The microstructure of all samples was also studied using light microscopy and toluidine blue O, calcofluor, and acid fuchsin staining. Results The total DF contents of fresh and freeze-dried bilberries and the press cake were 3.0, 24.1, and 58.9%, respectively. Most of the DF was insoluble. Only about half of it was carbohydrate, the rest being mostly sulphuric acid–insoluble material, waxy cutin from skins, and resilient seeds. Bilberry seeds represented over half of the press cake fraction, and in addition to skin, they were the major DF sources. Microscopy revealed that skins in the press cake were intact and the surface of the seeds had thick-walled cells. Conclusions Bilberry press cake is thus a good source of insoluble non-carbohydrate DF, and could be used to provide DF-rich foods to contribute to versatile intake of DF. PMID:26652738

  15. Quality parameters for cold pressed edible argan oils.

    PubMed

    Matthäus, Bertrand

    2013-01-01

    Argan oil belongs to the high-price vegetable oils on the market. Therefore, consumers have the right to purchase a high-quality product. The quality of edible vegetable oils is defined in food standards in which sensory quality is the most important feature. Additional parameters are defined to assess the identity of oils or to evaluate their oxidative state. The sensory quality of cold pressed argan oil is altered if the production has not been performed with reasonable care regarding raw material and extraction. Only oil from roasted seeds extracted by a screw-press had a sufficient sensory quality over a period of 20 weeks without unacceptable sensory attributes. Under accelerated storage conditions oil from roasted seeds extracted by a screw-press remained below the limits given by the Codex Alimentarius or the German guideline for Edible Fats and Oils for peroxide and totox value. Oil from unroasted seeds or oil from goat-digested roasted seeds and extracted by a screw-press, as well as oil from roasted seeds traditionally extracted, exceeded these limits. Initial oxidative stability of oil from unroasted seeds was significantly lower than that of the other oils. After 35 days under accelerated storage, oil from roasted seeds obtained using a screw-press showed the highest oxidative stability. Moreover, tocopherol and phytosterol compositions are useful features of argan oil. PMID:23472455

  16. Strength and power determinants of grinding performance in America's Cup sailors.

    PubMed

    Pearson, Simon N; Hume, Patria A; Cronin, John B; Slyfield, David

    2009-09-01

    The purpose grinding is a physically demanding component of America's Cup sailing that is important to overall team performance, but little research is available on the determinants of grinding performance. We examined the relationship between various measures of muscular performance and the performance of upper-body grinding. Eleven elite male America's Cup sailors (33.9 +/- 5.5 yr, 97.8 +/- 12.5 kg, 186.0 +/- 7.1 cm) who performed grinding as part of their on-board role with extensive strength training experience participated in this study. Muscular performance testing examined the force, velocity, and power capabilities of the upper-body musculature, with upper-body push (bench press) and pull (bench pull) movements performed across loads of 10-100% of 1 repetition maximum (1RM). Functional grinding performance was examined for both forward and backward grinding and at 2 different resistances (moderate = 48 N x m, heavy = 68 N x m) using a land-based ergometer. Bench press 1RM and maximum force capability were the measures demonstrating the strongest correlation with forward grinding performance (r = 0.88-0.99 and 0.87-0.99, respectively), with the relationship increasing with grinding load. For backward grinding, there was a very strong relationship with bench pull maximum power (r = 0.85-0.98) in addition to 1RM (r = 0.90-0.95) and maximum force (r = 0.87-0.95). It appears that although maximal strength is a crucial muscular performance characteristic for grinding performance in all conditions, for backward grinding, there is the additional need to focus on the development of speed strength/power to maximize performance gains. This information was used by the Emirates Team New Zealand physical conditioner to develop a conditioning intervention to help improve grinding performance. PMID:19675468

  17. Solutions to Challenges Facing a University Digital Library and Press

    PubMed Central

    D'Alessandro, Michael P.; Galvin, Jeffrey R.; Colbert, Stephana I.; D'Alessandro, Donna M.; Choi, Teresa A.; Aker, Brian D.; Carlson, William S.; Pelzer, Gay D.

    2000-01-01

    During the creation of a university digital library and press intended to serve as a medical reference and education tool for health care providers and their patients, six distinct and complex digital publishing challenges were encountered. Over nine years, through a multidisciplinary approach, solutions were devised to the challenges of digital content ownership, management, mirroring, translation, interactions with users, and archiving. The result is a unique, author-owned, internationally mirrored, university digital library and press that serves as an authoritative medical reference and education tool for users around the world. The purpose of this paper is to share the valuable digital publishing lessons learned and outline the challenges facing university digital libraries and presses. PMID:10833161

  18. Natural Hazards and the press in the western Mediterranean region

    NASA Astrophysics Data System (ADS)

    Llasat-Botija, M.; Llasat, M. C.; López, L.

    2007-07-01

    This study analyses press articles published between 1982 and 2005 in an attempt to describe the social perception of natural hazards in Catalonia. The articles included in the database have been classified according to different types of risk. In addition, the study examines the evolution of each type of risk in the press coverage during the study period. Finally, the results have been compared to data provided by insurance companies with respect to compensations paid out for damages. Conclusions show that floods are the most important natural hazard in the region, but that the number of headlines for each event is greater in the case of snowfalls and forest fires. Factors such as the season of the year, the proximity of the affected region to the capital, the topical issues at the time, and the presence of other important news must be considered when the impact in the press is analysed.

  19. Joining of ceramics of different biofunction by hot isostatic pressing

    SciTech Connect

    Li, Jianguo . Center for Dental Technology and Biomaterials); Harmansson, L. ); Soeremark, R. . Dept. of Prosthodontics)

    1993-10-01

    Monolithic zirconia (Z) and zirconia-hydroxyapatite (Z/HA) composites were joined by cold isostatic pressing (CIP at 300 MPa) and subsequently by glass-encapsulated hot isostatic pressing (HIP at 1225 C, 1 h and 200 MPa). The physical and mechanical properties of the materials were measured. The fracture surface was studied using a light microscope. The results indicate a strength level of the joint similar to that of the corresponding composite material (Z/HA), 845 and 860 MPa, respectively. Similar experiments with monolithic alumina (A) and alumina-hydroxyapatite (A/HA) were carried out without success. Cracking occurred in the joint area during the cold isostatic pressing process. It seems that ceramics with high green strength and similar green density are essential when joining ceramics by combined CIP and HIP processes.

  20. Method for hot pressing irregularly shaped refractory articles

    DOEpatents

    Steinkamp, William E.; Ballard, Ambrose H.

    1982-01-01

    The present invention is directed to a method for hot pressing irregularly haped refractory articles with these articles of varying thickness being provided with high uniform density and dimensional accuracy. Two partially pressed compacts of the refractory material are placed in a die cavity between displaceable die punches having compact-contacting surfaces of the desired article configuration. A floating, rotatable block is disposed between the compacts. The displacement of the die punches towards one another causes the block to rotate about an axis normal to the direction of movement of the die punches to uniformly distribute the pressure loading upon the compacts for maintaining substantially equal volume displacement of the powder material during the hot pressing operation.

  1. Crack toughness evaluation of hot pressed and forged beryllium

    NASA Technical Reports Server (NTRS)

    Jones, M. H.; Bubsey, R. T.; Brown, W. F., Jr.

    1971-01-01

    Beryllium fracture toughness test specimens were fatigue cracked using reversed cycling with a compression load two to three times the tension load. In worked beryllium, textures may be produced which result in fatigue cracks that are out of plane with the starter notch. Specimens of hot pressed stock exhibited load displacement records which were nonlinear throughout their course. Fracture specimens of both hot pressed and forged stock showed essentially no reduction of thickness and the fracture surfaces were flat and normal to the load axis. However, the stress intensity factor at maximum load increased with decreasing thickness. Load-displacement and electric potential records for the hot pressed beryllium specimens exhibited several anomalies such as negative residual crack mouth displacements and a decrease in electrical potential with increasing load.

  2. Thermal conductance of pressed contacts at liquid helium temperatures

    NASA Technical Reports Server (NTRS)

    Salerno, L. J.; Kittel, P.; Spivak, A. L.

    1983-01-01

    It is pointed out that the optimum design of cryogenic instruments requires accurate thermal models. The present models are limited by a lack of knowledge of the low temperature thermal conductance of the bolted joints which are typically used in the instrument-to-system interface. In connection with studies of pressed contacts, it has been found that the thermal conductance does not obey the Wiedemann-Franz law. The present investigation is concerned with the characterization of the thermal conductance of pressed contacts at liquid helium-4 temperatures, taking into account the dependence of thermal contact conductance on applied force and temperature. It is shown that for the 0.4 micron OFHC copper pressed contact pair, the thermal conductance varies roughly as the second power of the temperature, and increases with increasing applied force.

  3. Longer Interset Rest Periods Enhance Muscle Strength and Hypertrophy in Resistance-Trained Men.

    PubMed

    Schoenfeld, Brad J; Pope, Zachary K; Benik, Franklin M; Hester, Garrett M; Sellers, John; Nooner, Josh L; Schnaiter, Jessica A; Bond-Williams, Katherine E; Carter, Adrian S; Ross, Corbin L; Just, Brandon L; Henselmans, Menno; Krieger, James W

    2016-07-01

    Schoenfeld, BJ, Pope, ZK, Benik, FM, Hester, GM, Sellers, J, Nooner, JL, Schnaiter, JA, Bond-Williams, KE, Carter, AS, Ross, CL, Just, BL, Henselmans, M, and Krieger, JW. Longer interset rest periods enhance muscle strength and hypertrophy in resistance-trained men. J Strength Cond Res 30(7): 1805-1812, 2016-The purpose of this study was to investigate the effects of short rest intervals normally associated with hypertrophy-type training versus long rest intervals traditionally used in strength-type training on muscular adaptations in a cohort of young, experienced lifters. Twenty-one young resistance-trained men were randomly assigned to either a group that performed a resistance training (RT) program with 1-minute rest intervals (SHORT) or a group that employed 3-minute rest intervals (LONG). All other RT variables were held constant. The study period lasted 8 weeks with subjects performing 3 total body workouts a week comprised 3 sets of 8-12 repetition maximum (RM) of 7 different exercises per session. Testing was performed prestudy and poststudy for muscle strength (1RM bench press and back squat), muscle endurance (50% 1RM bench press to failure), and muscle thickness of the elbow flexors, triceps brachii, and quadriceps femoris by ultrasound imaging. Maximal strength was significantly greater for both 1RM squat and bench press for LONG compared to SHORT. Muscle thickness was significantly greater for LONG compared to SHORT in the anterior thigh, and a trend for greater increases was noted in the triceps brachii (p = 0.06) as well. Both groups saw significant increases in local upper body muscle endurance with no significant differences noted between groups. This study provides evidence that longer rest periods promote greater increases in muscle strength and hypertrophy in young resistance-trained men. PMID:26605807

  4. Can Energy Cost During Low-Intensity Resistance Exercise be Predicted by the OMNI-RES Scale?

    PubMed

    Vianna, Jefferson M; Reis, Victor M; Saavedra, Francisco; Damasceno, Vinicius; Silva, Sérgio G; Goss, Fredric

    2011-09-01

    The aim of the present study was to assess the precision of the OMNI-RES scale to predict energy cost (EC) at low intensity in four resistance exercises (RE). 17 male recreational body builders (age = 26.6 ± 4.9 years; height = 177.7 ± 0.1 cm; body weight = 79.0 ± 11.1 kg and percent body fat = 10.5 ± 4.6%) served as subjects. Initially tests to determine 1RM for four resistance exercises (bench press, half squat, lat pull down and triceps extension) were administered. Subjects also performed resistance exercise at 12, 16, 20, and 24% of 1RM at a rate of 40 bpm until volitional exhaustion. Oxygen uptake (VO2) and rate of perceived exertion (RPE) using the OMNI-RES were obtained during and after all RE. EC was calculated using VO2 and the caloric values of VO2 for non-protein RER. Regression analyses were performed for every RE, using EC as the dependent and RPE as the predictor variable. The triceps extension, lat pull down and bench press, RPE correlated strongly with EC (R > 0.97) and predicted EC with a error of less than 0.2 kcal.min(-1). In conclusion, RPE using the OMNI-RES scale can be considered as an accurate indicator of EC in the bench press, lat pull down and triceps extension performed by recreational bodybuilders, provided lower intensities are used (up to 24% of 1-RM) and provided each set of exercise is performed for the maximal sustainable duration. It would be interesting in future studies to consider having the subjects exercise at low intensities for longer durations than those in the present study. PMID:23486188

  5. Can Energy Cost During Low-Intensity Resistance Exercise be Predicted by the OMNI-RES Scale?

    PubMed Central

    Vianna, Jefferson M.; Reis, Victor M.; Saavedra, Francisco; Damasceno, Vinicius; Silva, Sérgio G.; Goss, Fredric

    2011-01-01

    The aim of the present study was to assess the precision of the OMNI-RES scale to predict energy cost (EC) at low intensity in four resistance exercises (RE). 17 male recreational body builders (age = 26.6 ± 4.9 years; height = 177.7 ± 0.1 cm; body weight = 79.0 ± 11.1 kg and percent body fat = 10.5 ± 4.6%) served as subjects. Initially tests to determine 1RM for four resistance exercises (bench press, half squat, lat pull down and triceps extension) were administered. Subjects also performed resistance exercise at 12, 16, 20, and 24% of 1RM at a rate of 40 bpm until volitional exhaustion. Oxygen uptake (VO2) and rate of perceived exertion (RPE) using the OMNI-RES were obtained during and after all RE. EC was calculated using VO2 and the caloric values of VO2 for non-protein RER. Regression analyses were performed for every RE, using EC as the dependent and RPE as the predictor variable. The triceps extension, lat pull down and bench press, RPE correlated strongly with EC (R > 0.97) and predicted EC with a error of less than 0.2 kcal.min−1. In conclusion, RPE using the OMNI-RES scale can be considered as an accurate indicator of EC in the bench press, lat pull down and triceps extension performed by recreational bodybuilders, provided lower intensities are used (up to 24% of 1-RM) and provided each set of exercise is performed for the maximal sustainable duration. It would be interesting in future studies to consider having the subjects exercise at low intensities for longer durations than those in the present study. PMID:23486188

  6. New applications of roller presses in coal-related technologies

    SciTech Connect

    Pietsch, W.; Guenter, H.

    1993-12-31

    The roller press was invented around the middle of the 19th century. Its objective was to develop an economic method for the agglomeration of coal fines. The first successfully operating machine was constructed by the Belgian Louiseau and was installed in a US coal briquetting plant in the late 1870s; therefore this type of equipment was later also referred to as {open_quotes}Belgian Press{close_quotes}. Until the middle of this century many manufacturers produced roller presses and a large number of plants was built, particularly in Europe, to produce mostly egg-shaped briquettes from hard coal fines with coal tar pitch or bitumen as a binder. These briquettes were used as fuel for home and industrial heating. After other, cleaner sources of energy, such as gas, oil, and electricity, became affordable, coal briquetting lost its importance. A small number of almost historic plants is still operating but construction of new ones is scarce. Only a few manufacturers of roller presses are still offering such equipment, mostly for other applications. Recently, a renewed interest in roller presses has developed in connection with innovative coal technologies. These include: Briquetting of non-coking coal for the generation of {open_quotes}form-coke{close_quotes}; production of smoke-less coal briquettes; briquetting of coal for gasification or liquefication techniques; size enlargement by briquetting of fine, upgraded coals, e.g. dried sub-bituminous coal or products from advanced coal cleaning processes, to improve their transport and handling properties; agglomeration of by-products from flue gas desulfurization; and, last but not least, briquetting of coal ashes to allow disposal or beneficial use. In the following such new applications of roller presses for coal related technologies will be reviewed and features of modern machines which are required for their successful operations will be described.

  7. Accuracy of press reports on gamma-ray astronomy

    NASA Astrophysics Data System (ADS)

    Schaefer, Bradley E.; Nemiroff, Robert J.; Hurley, Kevin

    2000-09-01

    Most Americans learn about modern science from press reports, while such articles have a bad reputation among scientists. We have performed a study of 148 news articles on gamma-ray astronomy to quantitatively answer the questions ``How accurate are press reports of gamma-ray astronomy?'' and ``What fraction of the basic claims in the press are correct?'' We have taken all articles on the topic from five news sources (UPI, New York Times, Sky & Telescope, Science News, and five middle-sized city newspapers) for one decade (1987-1996) We found an average rate of roughly one trivial error every two articles, while none of our 148 articles significantly mislead the reader or misrepresented the science. This quantitative result is in stark contrast to the nearly universal opinion among scientists that the press frequently butchers science stories. So a major result from our study is that reporters should be rehabilitated into the good graces of astrophysicists, since they actually are doing a good job. For our second question, we rated each story with the probability that its basic new science claim is correct. We found that the average probability over all stories is 70%. Since the reporters and the scientists are both doing good jobs, then why is 30% of the science you read in the press wrong? The reason is that the nature of news reporting is to present front-line science and the nature of front-line science is that reliable conclusions have not yet been reached. The combination of these two natures forces fast breaking science news to have frequent incorrect ideas that are subsequently identified and corrected. So a second major result from our study is to make the distinction between textbook science (with reliabilities near 100%) and front-line science which you read about in the press (with reliabilities near 70%). .

  8. Process design of press hardening with gradient material property influence

    SciTech Connect

    Neugebauer, R.; Schieck, F.; Rautenstrauch, A.

    2011-05-04

    Press hardening is currently used in the production of automotive structures that require very high strength and controlled deformation during crash tests. Press hardening can achieve significant reductions of sheet thickness at constant strength and is therefore a promising technology for the production of lightweight and energy-efficient automobiles. The manganese-boron steel 22MnB5 have been implemented in sheet press hardening owing to their excellent hot formability, high hardenability, and good temperability even at low cooling rates. However, press-hardened components have shown poor ductility and cracking at relatively small strains. A possible solution to this problem is a selective increase of steel sheet ductility by press hardening process design in areas where the component is required to deform plastically during crash tests. To this end, process designers require information about microstructure and mechanical properties as a function of the wide spectrum of cooling rates and sequences and austenitizing treatment conditions that can be encountered in production environments. In the present work, a Continuous Cooling Transformation (CCT) diagram with corresponding material properties of sheet steel 22MnB5 was determined for a wide spectrum of cooling rates. Heating and cooling programs were conducted in a quenching dilatometer. Motivated by the importance of residual elasticity in crash test performance, this property was measured using a micro-bending test and the results were integrated into the CCT diagrams to complement the hardness testing results. This information is essential for the process design of press hardening of sheet components with gradient material properties.

  9. Process design of press hardening with gradient material property influence

    NASA Astrophysics Data System (ADS)

    Neugebauer, R.; Schieck, F.; Rautenstrauch, A.

    2011-05-01

    Press hardening is currently used in the production of automotive structures that require very high strength and controlled deformation during crash tests. Press hardening can achieve significant reductions of sheet thickness at constant strength and is therefore a promising technology for the production of lightweight and energy-efficient automobiles. The manganese-boron steel 22MnB5 have been implemented in sheet press hardening owing to their excellent hot formability, high hardenability, and good temperability even at low cooling rates. However, press-hardened components have shown poor ductility and cracking at relatively small strains. A possible solution to this problem is a selective increase of steel sheet ductility by press hardening process design in areas where the component is required to deform plastically during crash tests. To this end, process designers require information about microstructure and mechanical properties as a function of the wide spectrum of cooling rates and sequences and austenitizing treatment conditions that can be encountered in production environments. In the present work, a Continuous Cooling Transformation (CCT) diagram with corresponding material properties of sheet steel 22MnB5 was determined for a wide spectrum of cooling rates. Heating and cooling programs were conducted in a quenching dilatometer. Motivated by the importance of residual elasticity in crash test performance, this property was measured using a micro-bending test and the results were integrated into the CCT diagrams to complement the hardness testing results. This information is essential for the process design of press hardening of sheet components with gradient material properties.

  10. New technique of machining high precision mirror surface press roller

    NASA Astrophysics Data System (ADS)

    Hongsen, Deng

    1991-03-01

    High precision mirror surface press roller machining technique of corrosion and grinding proof is one of the key techniques that the production enterprises as well as the machining and manufacturing of the following industries sought to resolve for a long time: plastics, papermaking, rubber, film, and chip production. In Oct. 1984, a new comprehensive machining technique of metal brush coating, grinding with abrasive belt, as well as buffing was used to conduct nearly 20 experiments. In Jan. 1985, a pair of middle convex high precision mirror surface press rollers was successfully machined. The technical process is described.

  11. Properties of Hot Pressed Titanium Alloy Powders for Cryogenic Applications.

    NASA Technical Reports Server (NTRS)

    Friedman, G. I.; Kazaroff, J. M.

    1970-01-01

    Evaluation of strength and toughness of hot-pressed titanium alloy powders at room and at cryogenic temperatures. The purpose was to determine how the mechanical properties of solid bodies formed from powder would compare with wrought specimens of the same size and with the same chemical analysis. It was found that of five titanium powder-making processes investigated, only the Rotating Electrode Process (REP) was capable of producing ELI-grade titanium alloy powder. Blocks hot-pressed from spherical REP powders had tensile properties equivalent to or better than those obtained from wrought bar.

  12. 25. Paper ready for the calender presses. This picture shows ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. Paper ready for the calender presses. This picture shows the paper after it has been coated and dried, as shown on page 238, and it being rolled at the end of the coating-machine. It is now ready to be sent to the big presses which calender it (or iron it, as popular pariance would have it). The pictures on pages 238 and 239 show a continuous process over a single machine; but on account of the length of teh machine, the process is illustrated in sections. (p.239.) - Champion-International Paper Company, West bank of Spicket River at Canal Street, Lawrence, Essex County, MA

  13. Canning Of Powdered Metal For Hot Isostatic Pressing

    NASA Technical Reports Server (NTRS)

    Juhas, John J.

    1989-01-01

    Quality of specimen enhanced by improved canning process. Method developed for canning specimens for hot isostatic pressing. Specimen placed inside refractory-metal ring, then sandwiched between two refractory-metal face sheets. Assembly placed inside die, then positioned in vacuum hot press. Heated to set temperature at prescribed vacuum to burn off all of binder in specimen. Advantages: powder-metallurgy composite totally purged of binder sealed in can in single operation, maintains size, shape, and uniformity of specimen. Weld region does not recrystallize, and little possibility of cracking.

  14. Predicting Power Output of Upper Body using the OMNI-RES Scale

    PubMed Central

    Bautista, Iker J.; Chirosa, Ignacio J.; Tamayo, Ignacio Martín; González, Andrés; Robinson, Joseph E.; Chirosa, Luis J.; Robertson, Robert J.

    2014-01-01

    The main aim of this study was to determine the optimal training zone for maximum power output. This was to be achieved through estimating mean bar velocity of the concentric phase of a bench press using a prediction equation. The values for the prediction equation would be obtained using OMNI–RES scale values of different loads of the bench press exercise. Sixty males (age 23.61 2.81 year; body height 176.29 6.73 cm; body mass 73.28 4.75 kg) voluntarily participated in the study and were tested using an incremental protocol on a Smith machine to determine one repetition maximum (1RM) in the bench press exercise. A linear regression analysis produced a strong correlation (r = −0.94) between rating of perceived exertion (RPE) and mean bar velocity (Velmean). The Pearson correlation analysis between real power output (PotReal) and estimated power (PotEst) showed a strong correlation coefficient of r = 0.77, significant at a level of p = 0.01. Therefore, the OMNI–RES scale can be used to predict Velmean in the bench press exercise to control the intensity of the exercise. The positive relationship between PotReal and PotEst allowed for the identification of a maximum power-training zone. PMID:25713677

  15. Boiling behavior of sodium-potassium alloy in a bench-scale solar receiver

    SciTech Connect

    Moreno, J.B.; Andraka, C.E.; Moss, T.A.

    1992-07-01

    During 1989-90, a 75-kW{sub t} sodium reflux pool-boiler solar receiver was successfully demonstrated at Sandia National Laboratories. Significant features of this receiver include (1) boiling sodium as the heat transfer medium and (2) electric-discharge-machined (EDM) cavities as artificial nucleation sites to stabilize boiling. Since this first demonstration, design of a second-generation pool-boiler receiver that will bring the concept closer to commercialization has begun. For long life, the new receiver uses Haynes Alloy 230. For increased safety factors against film boiling and flooding, it has a refined shape and somewhat larger dimensions. To eliminate the need for trace heating, the receiver will boil the sodium-potassium alloy NaK-78 instead of sodium. To reduce manufacturing costs, it will use one of a number of alternatives to EDM cavities for stabilization of boiling. To control incipient-boiling superheats, especially during hot restarts, it will contain a small amount of inert gas. Before the new receiver design could be finalized, bench-scale tests of some of the proposed changes were necessary. A series of bench-scale pool boilers were built from Haynes Alloy 230 and filled with NaK-78. Various boiling-stabilizer candidates were incorporated into them, including laser-drilled cavities and a number of different sintered-powder-metal coatings. These bench-scale pool boilers have been operated at temperatures up to 750{degree}C, heated by quartz lamps with incident radiant fluxes up to 95 W/cm{sup 2}. The effects of various orientations and added gases have been studied. results of these studies are presented. 15 refs.

  16. Boiling behavior of sodium-potassium alloy in a bench-scale solar receiver

    SciTech Connect

    Moreno, J.B.; Andraka, C.E.; Moss, T.A.

    1992-01-01

    During 1989-90, a 75-kW{sub t} sodium reflux pool-boiler solar receiver was successfully demonstrated at Sandia National Laboratories. Significant features of this receiver include (1) boiling sodium as the heat transfer medium and (2) electric-discharge-machined (EDM) cavities as artificial nucleation sites to stabilize boiling. Since this first demonstration, design of a second-generation pool-boiler receiver that will bring the concept closer to commercialization has begun. For long life, the new receiver uses Haynes Alloy 230. For increased safety factors against film boiling and flooding, it has a refined shape and somewhat larger dimensions. To eliminate the need for trace heating, the receiver will boil the sodium-potassium alloy NaK-78 instead of sodium. To reduce manufacturing costs, it will use one of a number of alternatives to EDM cavities for stabilization of boiling. To control incipient-boiling superheats, especially during hot restarts, it will contain a small amount of inert gas. Before the new receiver design could be finalized, bench-scale tests of some of the proposed changes were necessary. A series of bench-scale pool boilers were built from Haynes Alloy 230 and filled with NaK-78. Various boiling-stabilizer candidates were incorporated into them, including laser-drilled cavities and a number of different sintered-powder-metal coatings. These bench-scale pool boilers have been operated at temperatures up to 750{degree}C, heated by quartz lamps with incident radiant fluxes up to 95 W/cm{sup 2}. The effects of various orientations and added gases have been studied. results of these studies are presented. 15 refs.

  17. Automated full-field range OPD and MTF measurement bench for automotive objective benchmark

    NASA Astrophysics Data System (ADS)

    Boucher, W.; Yonnet, M.; Brahmi, D.; Gascon, A.; Deprez, M.; Wattellier, B.; Lavergne, O.

    2015-10-01

    We present a metrology bench used to benchmark the optical quality of lenses used in automotive applications. These lenses have a wide field of view, typically larger than 180° and fast numerical apertures (F/2). Lenses are compared in terms of OPD and MTF. For this aim, interferometric solutions would require double-passing the lens. Between two field positions, it would be necessary to realign the reference sphere. This is not compatible with the requested high measurement throughput. Therefore wave front sensing is the best solution to this problem because it is able to characterize lenses in single pass configurations. We chose to measure the transmitted wave front with a QuadriWave Lateral Shearing Inferferometer wave front sensor placed directly after the focal plane. This technology is best suited in this case because it has the unique ability to measure fast diverging beams with high accuracy. It can also accept the large tilt angles due to the lens non telecentricity. Because the information needed for lens comparison is the OPD in the exit pupil, the wave front is then back-propagated to it thanks to an innovative ray-trace algorithm. This algorithm is also able to deduce the aperture transmission to take into account vignetting effects that appear at the field edges. Finally the MTF is simulated from the OPD and the pupil function. This bench is fully automated to rapidly benchmark a large number of lenses in their complete field of view. We characterized the bench according to the ISO 5725 standard. Its precision was tested with commercial lenses whereas trueness was assessed with calibrated lenses. The accuracy on MTF was found to be below 1% over the whole field of view.

  18. An Integration of Geophysical Methods to Explore Buried Structures on the Bench and in the Field

    NASA Astrophysics Data System (ADS)

    Booterbaugh, A. P.; Lachhab, A.

    2011-12-01

    In the following study, an integration of geophysical methods and devices were implemented on the bench and in the field to accurately identify buried structures. Electrical resistivity and ground penetrating radar methods, including both a fabricated electrical resistivity apparatus and an electrical resistivity device were all used in this study. The primary goal of the study was to test the accuracy and reliability of the apparatus which costs a fraction of the price of a commercially sold resistivity instrument. The apparatus consists of four electrodes, two multimeters, a 12-volt battery, a DC to AC inverter and wires. Using this apparatus, an electrical current, is injected into earth material through the outer electrodes and the potential voltage is measured across the inner electrodes using a multimeter. The recorded potential and the intensity of the current can then be used to calculate the apparent resistivity of a given material. In this study the Wenner array, which consists of four equally spaced electrodes, was used due to its higher accuracy and greater resolution when investigating lateral variations of resistivity in shallow depths. In addition, the apparatus was used with an electrical resistivity device and a ground penetrating radar unit to explore the buried building foundation of Gustavus Adolphus Hall located on Susquehanna University Campus, Selinsgrove, PA. The apparatus successfully produced consistent results on the bench level revealing the location of small bricks buried under a soil material. In the summer of 2010, seventeen electrical resistivity transects were conducted on the Gustavus Adolphus site where and revealed remnants of the foundation. In the summer of 2011, a ground penetrating radar survey and an electrical resistivity tomography survey were conducted to further explore the site. Together these methods identified the location of the foundation and proved that the apparatus was a reliable tool for regular use on the bench

  19. Sensory feedback in prosthetics: a standardized test bench for closed-loop control.

    PubMed

    Dosen, Strahinja; Markovic, Marko; Hartmann, Cornelia; Farina, Dario

    2015-03-01

    Closing the control loop by providing sensory feedback to the user of a prosthesis is an important challenge, with major impact on the future of prosthetics. Developing and comparing closed-loop systems is a difficult task, since there are many different methods and technologies that can be used to implement each component of the system. Here, we present a test bench developed in Matlab Simulink for configuring and testing the closed-loop human control system in standardized settings. The framework comprises a set of connected generic blocks with normalized inputs and outputs, which can be customized by selecting specific implementations from a library of predefined components. The framework is modular and extensible and it can be used to configure, compare and test different closed-loop system prototypes, thereby guiding the development towards an optimal system configuration. The use of the test bench was demonstrated by investigating two important aspects of closed-loop control: performance of different electrotactile feedback interfaces (spatial versus intensity coding) during a pendulum stabilization task and feedforward methods (joystick versus myocontrol) for force control. The first experiment demonstrated that in the case of trained subjects the intensity coding might be superior to spatial coding. In the second experiment, the control of force was rather poor even with a stable and precise control interface (joystick), demonstrating that inherent characteristics of the prosthesis can be an important limiting factor when considering the overall effectiveness of the closed-loop control. The presented test bench is an important instrument for investigating different aspects of human manual control with sensory feedback. PMID:25420268

  20. Screening of phenylpyruvic acid producers and optimization of culture conditions in bench scale bioreactors.

    PubMed

    Coban, Hasan B; Demirci, Ali; Patterson, Paul H; Elias, Ryan J

    2014-11-01

    Alpha keto acids are deaminated forms of amino acids that have received significant attention as feed and food additives in the agriculture and medical industries. To date, their production has been commonly performed at shake-flask scale with low product concentrations. In this study, production of phenylpyruvic acid (PPA), which is the alpha keto acid of phenylalanine was investigated. First, various microorganisms were screened to select the most efficient producer. Thereafter, growth parameters (temperature, pH, and aeration) were optimized in bench scale bioreactors to maximize both PPA and biomass concentration in bench scale bioreactors, using response surface methodology. Among the four different microorganisms evaluated, Proteus vulgaris was the most productive strain for PPA production. Optimum temperature, pH, and aeration conditions were determined as 34.5 °C, 5.12, and 0.5 vvm for PPA production, whereas 36.9 °C, pH 6.87, and 0.96 vvm for the biomass production. Under these optimum conditions, PPA concentration was enhanced to 1,054 mg/L, which was almost three times higher than shake-flask fermentation concentrations. Moreover, P. vulgaris biomass was produced at 3.25 g/L under optimum conditions. Overall, this study demonstrated that optimization of growth parameters improved PPA production in 1-L working volume bench-scale bioreactors compared to previous studies in the literature and was a first step to scale up the production to industrial production. PMID:24861313

  1. Boiling behavior of sodium-potassium alloy in a bench-scale solar receiver

    NASA Astrophysics Data System (ADS)

    Moreno, J. B.; Andraka, C. E.; Moss, T. A.

    During 1989-90, a 75-kW(sub t) sodium reflux pool-boiler solar receiver was successfully demonstrated at Sandia National Laboratories. Significant features of this receiver include the following: (1) boiling sodium as the heat transfer medium, and (2) electric-discharge-machined (EDM) cavities as artificial nucleation sites to stabilize boiling. Since this first demonstration, design of a second-generation pool-boiler receiver that will bring the concept closer to commercialization has begun. For long life, the new receiver uses Haynes Alloy 230. For increased safety factors against film boiling and flooding, it has a refined shape and somewhat larger dimensions. To eliminate the need for trace heating, the receiver will boil the sodium-potassium alloy NaK-78 instead of sodium. To reduce manufacturing costs, it will use one of a number of alternatives to EDM cavities for stabilization of boiling. To control incipient-boiling superheats, especially during hot restarts, it will contain a small amount of inert gas. Before the new receiver design could be finalized, bench-scale tests of some of the proposed changes were necessary. A series of bench-scale pool boilers were built from Haynes Alloy 230 and filled with NaK-78. Various boiling-stabilizer candidates were incorporated into them, including laser-drilled cavities and a number of different sintered-powder-metal coatings. These bench-scale pool boilers have been operated at temperatures up to 750 C, heated by quartz lamps with incident radiant fluxes up to 95 W/sq cm. The effects of various orientations and added gases have been studied. Results of these studies are presented.

  2. Acute ingestion of sugar-free red bull energy drink has no effect on upper body strength and muscular endurance in resistance trained men.

    PubMed

    Eckerson, Joan M; Bull, Anthony J; Baechle, Thomas R; Fischer, Chelsea A; O'Brien, Daniel C; Moore, Geri A; Yee, Jennifer C; Pulverenti, Timothy S

    2013-08-01

    Consumption of energy drinks by both recreational and competitive athletes has increased dramatically in recent years. The primary ingredients in many energy drinks include caffeine (CAF) in various forms and taurine. The purpose of this randomized, double-blind, crossover study was to examine the effect of sugar-free (SF) Red Bull (RB) containing CAF and taurine to a CAF only drink and a SF CAF-free placebo (PL) on 1 repetition maximum (1RM) bench press (BP) and the volume load (VL; repetitions × kg at 70% 1RM) during one BP set to failure in experienced lifters. Seventeen college-age men randomly received the following: (A) 500 mL of SF-RB containing CAF (160 mg) and taurine (2000 mg); (B) 500 mL of a SF drink containing CAF only (160 mg); or (C) a SF CAF-free 500 mL PL drink 60 minutes before testing on 3 separate occasions. After a standard warm-up, the 1RM was determined for each subject and, after 5 minutes rest, they completed repetitions to failure at 70% of their 1RM to assess VL. Differences between trials for 1RM BP and the VL were identified using repeated measures analysis of variance (p < 0.05). The results indicated that neither SF-RB nor the CAF drink had any effect on 1RM BP (115.13 ± 16.19 kg and 114.87 ± 16.16 kg, respectively) or VL (1173.08 ± 170.66 kg and 1164.14 ± 147.03 kg, respectively) compared with PL (1RM = 114.07 ± 16.09 kg; VL = 1141.46 ± 193.41 kg). Although the CAF content in the energy drinks used in the present study was low (∼2.0 mg/kg), the finding of no effect of the CAF containing energy drinks for 1RM BP are in agreement with previous studies using intakes up to 6.0 mg/kg. These findings suggest that SF-RB has no effect on upper body 1RM strength or VL in resistance trained men. PMID:23880655

  3. STS-26 crewmembers participate in bench review at offsite Boeing Bldg

    NASA Technical Reports Server (NTRS)

    1988-01-01

    STS-26 Discovery, Orbiter Vehicle (OV) 103, crewmembers participate in bench review at the offsite Boeing Building. Standing behind table filled with various items of onboard attire are (left to right) Commander Frederick H. Hauck, Mission Specialist (MS) David C. Hilmers, Pilot Richard O. Covey, MS John M. Lounge, and MS George D. Nelson. Clothing includes light blue constant wear flight coveralls and jacket, shorts (with velcro for pen and pencil pocket attachment), shirts, socks, and slippers. Table with hygiene supplies and flight coveralls hanging on rack appear in the background. Photograph was taken by Keith Meyers of the NEW YORK TIMES.

  4. Construction and Bench Testing of a Rotatable Collimator for the LHC Collimation Upgrade

    SciTech Connect

    Smith, Jeffrey Claiborne; Keller, Lewis; Lundgren, Steven; Markiewicz, Thomas; /SLAC

    2010-08-26

    The Phase II upgrade to the LHC collimation system calls for complementing the 30 high robust Phase I graphite secondary collimators with 30 high Z Phase II collimators. The Phase II collimators must be robust in various operating conditions and accident scenarios. This paper reports on the final construction and testing of the prototype collimator to be installed in the SPS (Super Proton Synchrotron) at CERN. Bench-top measurements will demonstrate that the device is fully operational and has the mechanical and vacuum characteristics acceptable for installation in the SPS.

  5. EVA tools are documented during the STS-57 bench review at Boeing's FEPF

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The contents of stowage Volume D is displayed on a table top during the STS-57 bench review conducted at Boeing's Flight Equipment Processing Facility (FEPF) near the JSC site. A diagram identifies the location of these extravehicular activity (EVA) tools within the stowage area and their specific names. Included are an antenna cutter, EURECA cable cutter, a portable foot restraint (PFR) articulating socket, PFR socket bridge fitting, a shrouded rigid screwdriver and an extension, a tool caddy, and extravehicular mobility unit (EMU) batteries. Photo taken by NASA JSC contract photographer Benny Benavides.

  6. STS-31 MS McCandless inspects HST tools during bench review at Boeing FEPF

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Clean-suited STS-31 Mission Specialist (MS) Bruce McCandless II attaches an extension which is tethered to the ratchet caddy assembly to a torque limiter during the STS-31 bench review at Boeing's Flight Equipment Processing Facility (FEPF) near the JSC site. The tools McCandless is experimenting with will be used if extravehicular activity (EVA) operations are required during the STS-31 deployment of the Hubble Space Telescope (HST) aboard Discovery, Orbiter Vehicle (OV) 103. Technicians and training personnel stand by ready to explain the equipment and its operation.

  7. Test bench for studying the outlook for industrial applications of an oxygen-iodine laser

    SciTech Connect

    Adamenkov, A A; Bakshin, V V; Bogachev, A V; Buryak, E V; Vdovkin, L A; Velikanov, S D; Vyskubenko, B A; Garanin, Sergey G; Gorbacheva, E V; Grigorovich, Sergei V; Il'in, S P; Il'kaev, R I; Ilyushin, Yurii N; Kalashnik, A M; Kolobyanin, Yu V; Leonov, M L; Svischev, V V; Troshkin, M V

    2007-07-31

    We report the development and tests of a chemical oxygen-iodine laser test bench based on a twisted-aerosol-flow singlet-oxygen generator and a supersonic laser model for studying the outlook for industrial applications of this laser. The maximal output power of the laser is {approx}65 kW (the average power is {approx}50 kW), corresponding to a specific output power of {approx}110 W cm{sup -2}. The maximal chemical efficiency is {approx}34%. (letters)

  8. STS-57 inflight maintenance (IFM) tool tray at Boeing FEPF bench review

    NASA Technical Reports Server (NTRS)

    1993-01-01

    STS-57 inflight maintenance (IFM) tool tray is displayed on a table top during the bench review at Boeing's Flight Equipment Processing Facility (FEPF) located near JSC. The tool tray will be located on Endeavour's, Orbiter Vehicle (OV) 105's, middeck in forward locker MF57K and includes pinch bar, deadblow hammer, punch, inspection mirror, speed handle assembly, robbins wrench, adjustable wrench, vise grips, connector pliers, ACCU bypass connector, connector strap wrench, locker tool, and mechanical fingers. Photo taken by NASA JSC contract photographer Benny Benavides.

  9. Method, apparatus and system for managing queue operations of a test bench environment

    DOEpatents

    Ostler, Farrell Lynn

    2016-07-19

    Techniques and mechanisms for performing dequeue operations for agents of a test bench environment. In an embodiment, a first group of agents are each allocated a respective ripe reservation and a second set of agents are each allocated a respective unripe reservation. Over time, queue management logic allocates respective reservations to agents and variously changes one or more such reservations from unripe to ripe. In another embodiment, an order of servicing agents allocated unripe reservations is based on relative priorities of the unripe reservations with respect to one another. An order of servicing agents allocated ripe reservations is on a first come, first served basis.

  10. Gene Delivery in salivary glands: from the bench to the clinic

    PubMed Central

    Samuni, Yuval; Baum, Bruce J.

    2011-01-01

    In vivo gene delivery has long been seen as providing opportunities for the development of novel treatments for disorders refractory to existing therapies. Over the last two decades, salivary glands have proven to be a useful, if somewhat unconventional, target tissue for studying several potential clinical applications of therapeutic gene delivery. Herein, we follow the progress, address some problems and assess the outlook for clinical applications of salivary gland gene delivery. Our experience with these tissues provides a roadmap for the process of moving an idea from the laboratory bench to patients. PMID:21763423

  11. CSI L2 - Reconstructing Herschel/Planck, Anomalies on the Avionics Bench

    NASA Astrophysics Data System (ADS)

    Bacchetta, Andrea; Cocito, Andrea; Oort, Marc; Procopio, Dorico

    2010-08-01

    One year after the launch of Herschel and Planck it is time to show the issues which occurred in-flight that have required dedicated analyses. In particular, the role played by the Avionics Test Bench in investigating the anomalies involving the Attitude Control is presented. This verification set-up has been used extensively initially for reproducing the observed behavior and then to validate the various solutions that have been identified and implemented. Different entities, from the equipment suppliers up to the final customer, have been involved in this process and their role is presented.

  12. Theoretical Rationale of Heating Block for Testing Bench of Aerospace Crafts Thermal Protection Elements

    NASA Astrophysics Data System (ADS)

    Petrova, Anna A.; Reznik, Sergey V.

    2016-02-01

    The theoretical rationale for the structural layout of a testing bench with zirconium dioxide heating elements on the basis of modelling radiative-conductive heat transfer are presented. The numerical simulation of radiative-conductive heat transfer for the two-dimensional scaled model of the testing segment with the finite-element analysis software package Ansys 15.0 are performed. The simulation results showed that for the selected layout of the heaters the temperature non-uniformity along the length of the sample over time will not exceed 3 % even at a temperature of 2000 K.

  13. Development of model-based fault diagnosis algorithms for MASCOTTE cryogenic test bench

    NASA Astrophysics Data System (ADS)

    Iannetti, A.; Marzat, J.; Piet-Lahanier, H.; Ordonneau, G.; Vingert, L.

    2014-12-01

    This article describes the on-going results of a fault diagnosis benchmark for a cryogenic rocket engine demonstrator. The benchmark consists in the use of classical model- based fault diagnosis methods to monitor the status of the cooling circuit of the MASCOTTE cryogenic bench. The algorithms developed are validated on real data from the last 2014 firing campaign (ATAC campaign). The objective of this demonstration is to find practical diagnosis alternatives to classical redline providing more flexible means of data exploitation in real time and for post processing.

  14. The Press, the Government, and the Ethics Vacuum.

    ERIC Educational Resources Information Center

    Merrill, John C.

    Immanuel Kant's idea of a will to do the right thing--to be ethical--is essentially a dead concept with both press and government. The reasons for this "ethics vacuum" are two-fold: the foundations of ethics in both circles are vague, confusing, and beset by relativism and pragmatism so that no system of ethics ever really coalesces; and neither…

  15. The Press and California Higher Education. A Report.

    ERIC Educational Resources Information Center

    Chance, William

    This study examined the media coverage of California higher education in the popular press in four of the state's major dailies. In particular the study examined the roles that the San Francisco Chronicle, the Sacramento Bee, the Los Angeles Times, and the San Jose Mercury News play in fostering the public debate about higher education. All the…

  16. 42. PRESSING A SLAB OF CLAY ONTO A MOSAIC MOLD. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. PRESSING A SLAB OF CLAY ONTO A MOSAIC MOLD. THE MOLD, WHICH HAS A RAISED DESIGN, LEAVES AND OUTLINE IN THE SLAB, THE PIECES THUS DEFINED, ARE THEN CUT APART TO BE FIRED SEPARATELY AND REASSEMBLED. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

  17. PRESS SITE BECOMES INTERNATIONAL GATHERING SITE FOR MEDIA

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The KSC press site becomes a busy international gathering site for the media during shuttle launch periods. Various activities are held in a number of facilities ranging in age. The news dome (shown during mission STS-41 pre-launch) was originally built as part of the 1976 Bicentennial.

  18. SOURCE ASSESSMENT: PRESSED AND BLOWN GLASS MANUFACTURING PLANTS

    EPA Science Inventory

    This report summarizes the results of a study to gather and analyze background information and technical data related to air emissions from glass manufacturers producing pressed and blown glassware. This includes all glassware except flat glass, glass containers, and fiber glass....

  19. The First Amendment, Schools and the Press: A Current Issue.

    ERIC Educational Resources Information Center

    Sasse, Mary

    While it is informative to trace the vicissitudes to which the First Amendment has been subjected since 1791, it is obvious that as far as schools are concerned, the courts have interpreted freedom of speech and the press in a limited way. For example, the courts have ruled that boards of education may remove books from school libraries on the…

  20. Argonne Director Eric Isaacs addresses the National Press Club

    ScienceCinema

    Eric Isaccs

    2010-01-08

    Argonne Director Eric Isaacs addresses the National Press Club on 9/15/2009. To build a national economy based on sustainable energy, the nation must first "reignite its innovation ecology," he said. Issacs makes the case for investing in science to secure America's future.

  1. The Press of the Soviet Union: A Bibliography.

    ERIC Educational Resources Information Center

    Bergethon, Bruce; And Others

    Compiled in response to the need for more information on the differences between the press systems of the United States and the Soviet Union, this bibliography contains 240 entries. Consisting of newspaper articles, journal articles, books, and pamphlets, the bibliography provides an overview of the different journalistic philosophies of the two…

  2. Quid Pro Quo: Tobacco Companies and the Black Press

    PubMed Central

    McCandless, Phyra M.; Yerger, Valerie B.

    2012-01-01

    Objectives. We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. Methods. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. Results. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. Conclusions. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries. PMID:21852652

  3. DETAIL VIEW OF FILTER PRESS REMAINS, BOILER, SECONDARY ORE BIN, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW OF FILTER PRESS REMAINS, BOILER, SECONDARY ORE BIN, TRAM TRESTLE AND WATER TANK, LOOKING NORTHWEST. HIS VIEW IS TAKEN FROM THE THIRD LEVEL OF THE MILL, NEARBY THE BLACKSMITH'S FORGE. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

  4. 19. Interior detail, grinder and drill press, Machine Shop, Roundhouse ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Interior detail, grinder and drill press, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to south (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  5. 18. Interior detail, drill press and grinder, Machine Shop, Roundhouse ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Interior detail, drill press and grinder, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to east (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  6. Tell Us More: Reading Comprehension, Engagement, and Conceptual Press Discourse

    ERIC Educational Resources Information Center

    McElhone, Dot

    2012-01-01

    This study examines interactions between teachers and students during reading comprehension instruction to determine how certain patterns of teacher-student talk support student comprehension achievement and reading engagement. The central focus of the study is "conceptual press discourse," a pattern of teacher response that includes requests for…

  7. Looking north at uing press of the submerged arc weld ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking north at u-ing press of the submerged arc weld (saw) line of the main pipe mill building, bay 7. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

  8. 9. VIEW OF MOLTEN SALT BATH EQUIPMENT AND ROLLER PRESSES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. VIEW OF MOLTEN SALT BATH EQUIPMENT AND ROLLER PRESSES BEING INSTALLED ON THE WEST SIDE (SIDE B) OF BUILDING 883. SIDE B OF BUILDING 883 WAS USED TO PROCESS ENRICHED URANIUM FROM 1957-66. (1/23/57) - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  9. Ethics and the Press: Readings in Mass Media Morality.

    ERIC Educational Resources Information Center

    Merrill, John C., Ed.; Barney, Ralph D., Ed.

    This collection of 35 articles addresses the topic of the ethical considerations and implications involved in reporting the news. Included in this book are such articles as: "Ethics and Journalism" by John Merrill, "Quality in Mass Communications" by Wilbur Schramm, "The American Press: Some Truths About Truths" by Edward Jay Epstein, "The New…

  10. Googling "Deaf": Deafness in the World's English-Language Press

    ERIC Educational Resources Information Center

    Power, Des

    2007-01-01

    An Internet search tool, Google Alert, was used to survey the global English-language press July-December 2005 for references to deaf people. The survey found that such references focus on people who are deaf rather than the disability itself, thus demonstrating how well deaf people fit into the mainstream. Derogatory terminology such as "deaf and…

  11. University Press Meeting Dominated by Donor Proposal and Digital Publishing

    ERIC Educational Resources Information Center

    Howard, Jennifer

    2007-01-01

    A surprise request for proposals from the Andrew W. Mellon Foundation and a forthcoming report on university publishing in the digital age were among topics discussed at the annual meeting of the Association of American University Presses. The offer from the Mellon Foundation concerns support for collaborative, monograph-centered projects in…

  12. Student Press Freedom: One View of the "Hazelwood" Decision.

    ERIC Educational Resources Information Center

    Goodman, Mark

    1988-01-01

    Reviews the "Hazelwood v. Kuhlmeier" U.S. Supreme Court decision upholding a principal's right to censor the content of a school-sponsored student publication. Explains why teachers oppose this decision, discusses liability issues, and argues for a free, uncensored student press. Includes eight legal references. (MLH)

  13. The Post-Revolutionary Portuguese Press: New Faces, Old Problems.

    ERIC Educational Resources Information Center

    Agee, Warren K.; Traquina, Nelson

    The Portuguese press is now guaranteed free access to official sources of information, professional confidentiality, freedom of publication and of competition, and the independence of the professional journalist; yet its ability to influence public opinion is limited by a traditional expectation of governmental repression and by present financial…

  14. A Community College District/University Press Copublishing Venture.

    ERIC Educational Resources Information Center

    Caraway, Georgia Kemp

    1994-01-01

    Describes cooperation between the Dallas County Community College District (DCCCD) and University of North Texas Press, resulting in the publication of a collection of short stories and a book of poetry written by DCCCD faculty and staff. Provides information on sales, marketing and promotion, classroom use of the books, and opportunities for…

  15. "...Establish the Student Press--And Stifle It!"

    ERIC Educational Resources Information Center

    McCallie, Franklin

    1990-01-01

    Presents an acceptance speech by Franklin McCallie, principal of Kirkwood High School (Missouri), for the "Administrator of the Year" award presented by the Missouri Interscholastic Press Association and the Missouri Journalism Education Association in April 1989. Discusses journalism's role in achieving the school's chief goals: student growth,…

  16. Toward a Normative Theory of Freedom of the Press.

    ERIC Educational Resources Information Center

    Jensen, Dwight Wm.

    In considering the possibility of a normative theory of freedom of the press, this paper examines arguments about such freedom in the Third World and elsewhere. Some of the arguments discussed in the paper are derived from the theories of John Locke and Karl Marx; others are drawn from the concepts of divine rights, elitism, liberal democracy, and…

  17. Extraction of proteins from pennycress seeds and press cake

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In order to more fully utilize pennycress, a potentially viable bio-diesel source, the proteinaceous components were extracted from pennycress seed and press cake. The amino acid composition of the proteins present in pennycress was typical for proteins derived from plants, with glycine, glutamic ac...

  18. The CAPRI Project: Coordinates for Astronomical Press Release Images

    NASA Astrophysics Data System (ADS)

    Frattare, Lisa M.; Ferguson, B. A.; Summers, F.; Levay, Z. G.

    2009-01-01

    The beauty and splendor of astronomical press release images has made an enormously positive impact with the media and public alike. As a leading provider of astronomical imagery and a major contributor of Hubble Space Telescope press release images, the outreach division of Space Telescope Science Institute (STScI) recognizes the importance of making press release images compliant with virtual observatory standards for inclusion in databases and repositories. Our goal is to make outreach images accessible by virtual observatory applications by calculating World Coordinate System (WCS) data for these images. We provide updated and improved software that allows observatories to easily and accurately transform coordinates on their astronomical press release images, using reference FITS files. The resultant metadata conforms to the Simple Image Access (SIA) protocol established by the International Virtual Observatory Alliance and has been used by popular end users such as Google Sky and World Wide Telescope. Several hundred images from the STScI Office of Public Outreach NewsCenter database have been processed, and their coordinates and other relevant metadata are accessible through an SIA-compliant web service.

  19. Institutional Stress: Conflicting Normative Models in the Catholic Press.

    ERIC Educational Resources Information Center

    Thorn, William; Garrison, M. Bruce

    To determine whether the diocesan newspapers of the Catholic church are based on an autonomous, adversarial model or on an institutional, public relations model of the press, a survey was conducted of 148 editors and 145 bishops or publishers of such newspapers. Results showed that the editors and bishops agreed on the three major roles of the…

  20. Skylab 4 crewmen look over notes for press conference

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The three crewmen of the third manned Skylab mission look over their notes for their upcoming post-mission press conference at JSC. They are, from left to right, Astronaut Gerald P. Carr, commander; Scientist-Astronaut Edward G. Gibson, science pilot; and Astronaut William R. Pogue, pilot. The three astronauts spent 84 days aboard the Skylab space station cluster in Earth orbit.