Science.gov

Sample records for 1st floor plan

  1. Third Floor Plan, Second Floor Plan, First Floor Plan, Ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Third Floor Plan, Second Floor Plan, First Floor Plan, Ground Floor Plan, West Bunkhouse - Kennecott Copper Corporation, On Copper River & Northwestern Railroad, Kennicott, Valdez-Cordova Census Area, AK

  2. 14. Building 105, Facilities Engineering Building, 1830, interior, 1st floor, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Building 105, Facilities Engineering Building, 1830, interior, 1st floor, crib area of building, showing electrical and plumbing cribs, wall and ceiling detail, looking S. - Watervliet Arsenal, Building 105, South Broadway, on Hudson River, Watervliet, Albany County, NY

  3. 7. 1ST FLOOR, LOOKING SOUTH SHOWING DINING ROOM FIREPLACE (LEFT); ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. 1ST FLOOR, LOOKING SOUTH SHOWING DINING ROOM FIREPLACE (LEFT); ENTRY SITTING ROOM FIREPLACE (RIGHT) AND LIVING ROOM (BACKGROUND). - Fort Riley, Building No. 4, 4 Barry Avenue, Riley, Riley County, KS

  4. 62. Neg. No. F75A, Jun 18, 1930, INTERIORWAREHOUSE, 1ST FLOOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    62. Neg. No. F-75A, Jun 18, 1930, INTERIOR-WAREHOUSE, 1ST FLOOR, STORAGE OF AUTOMOBILE COMPONENTS - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA

  5. 24. OVERALL OF 1st FLOOR OF MILL NO. 1. PALLETS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. OVERALL OF 1st FLOOR OF MILL NO. 1. PALLETS HELD CLOTH IN STORAGE IN LATE 20th CENTURY. IRON POSTS IN LEFT DISTANCE FRONTED CLOTH BINS. HISTORIAN LEEANN LANDS IN BACKGROUND WITH LIGHT. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  6. 46. NORTH END OF MILL NO. 2, 1st FLOOR, BELOW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. NORTH END OF MILL NO. 2, 1st FLOOR, BELOW PICKER AND CLOTH ROOM AREA. FUNCTION OF THIS SPACE UNKNOWN AT PRESENT. NOTE THAT EYE BEAM REPLACES ORIGINAL WALL OF 1892 PICKER HOUSE. CENTER (OR LEFT) DOOR IS ENTRY TO MILL NO. 2. RIGHT DOOR IS ENTRY TO 1892 NAPPER ROOM. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  7. STIRLING'S QUARTERS SMALL BARN: FIRST FLOOR PLAN; SECOND FLOOR PLAN; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STIRLING'S QUARTERS SMALL BARN: FIRST FLOOR PLAN; SECOND FLOOR PLAN; SOUTH ELEVATION; EAST ELEVATION; NORTH ELEVATION; WEST ELEVATION. - Stirling's Quarters, 555 Yellow Springs Road, Tredyffrin Township, Valley Forge, Chester County, PA

  8. Floor Plans: Section "AA", Section "BB"; Floor Framing Plans: Section ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Floor Plans: Section "A-A", Section "B-B"; Floor Framing Plans: Section "A-A", Section "B-B" - Fort Washington, Fort Washington Light, Northeast side of Potomac River at Fort Washington Park, Fort Washington, Prince George's County, MD

  9. Floor-plan radar

    NASA Astrophysics Data System (ADS)

    Falconer, David G.; Ueberschaer, Ronald M.

    2000-07-01

    Urban-warfare specialists, law-enforcement officers, counter-drug agents, and counter-terrorism experts encounter operational situations where they must assault a target building and capture or rescue its occupants. To minimize potential casualties, the assault team needs a picture of the building's interior and a copy of its floor plan. With this need in mind, we constructed a scale model of a single- story house and imaged its interior using synthetic-aperture techniques. The interior and exterior walls nearest the radar set were imaged with good fidelity, but the distal ones appear poorly defined and surrounded by ghosts and artifacts. The latter defects are traceable to beam attenuation, wavefront distortion, multiple scattering, traveling waves, resonance phenomena, and other effects not accounted for in the traditional (noninteracting, isotropic point scatterer) model for radar imaging.

  10. Two and Three Bedroom Units: First Floor Plan, Second Floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Two and Three Bedroom Units: First Floor Plan, Second Floor Plan, South Elevation (As Built), North Elevation (As Built), East Elevation (As Built), East Elevation (Existing), North Elevation (Existing) - Aluminum City Terrace, East Hill Drive, New Kensington, Westmoreland County, PA

  11. Southwest elevation, roof plan, site plan & main floor plan, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Southwest elevation, roof plan, site plan & main floor plan, loft plan, section looking east, north window head detail - Richard Buckminster Fuller & Anne Hewlett Fuller Dome Home, 407 South Forest Avenue, Carbondale, Jackson County, IL

  12. 21. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR WAS USED FOR DEPLETED AND ENRICHED URANIUM FABRICATION. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  13. 22. VIEW OF THE SECOND FLOOR PLAN. THE SECOND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. VIEW OF THE SECOND FLOOR PLAN. THE SECOND FLOOR CONTAINS THE AIR PLENUM ND SOME OFFICE SPACE. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  14. statement of significance, site plan, floor plan, elevations, perspective, exploded ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    statement of significance, site plan, floor plan, elevations, perspective, exploded construction diagram, door detail, hardware detail. - Floral Hall, City Park, Conneaut Avenue, Bowling Green, Wood County, OH

  15. Photocopy of ground floor plan, ca. 12939. Plans and renovations ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of ground floor plan, ca. 12939. Plans and renovations required for the 1940-1941 addition are overlaid on the original plan - Stamford Post Office, 421 Atlantic Street, Stamford, Fairfield County, CT

  16. Floor Plans Foundation Plan at Bedrock and Subgrade Level ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Floor Plans - Foundation Plan at Bedrock and Subgrade Level Plan - Marshall Space Flight Center, F-1 Engine Static Test Stand, On Route 565 between Huntsville and Decatur, Huntsville, Madison County, AL

  17. Photocopy of first floor plan dated July 31, 1939. Plans ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of first floor plan dated July 31, 1939. Plans and renovations required for the 1940-1941 addition are overlaid on the original plan - Stamford Post Office, 421 Atlantic Street, Stamford, Fairfield County, CT

  18. 76 FR 7098 - Dealer Floor Plan Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-09

    ... ADMINISTRATION 13 CFR Parts 120 and 121 Dealer Floor Plan Pilot Program AGENCY: U.S. Small Business... Dealer Floor Plan Pilot Program to make available 7(a) loan guaranties for lines of credit that provide floor plan financing. This new Dealer Floor Plan Pilot Program was created in the Small Business...

  19. 19. MOTOR FLOOR PLAN, GRAIN ELEVATOR. Plan No. 18069, 1904 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. MOTOR FLOOR PLAN, GRAIN ELEVATOR. Plan No. 18069, 1904 Conrail Microfilm MF004866 - West Shore Railroad, Pier 7 Grain Elevator, Hudson River & Pershing Road vicinity, West New York, Hudson County, NJ

  20. location plan, floor plan, west elevation, east elevation Chopawamsic ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    location plan, floor plan, west elevation, east elevation - Chopawamsic Recreational Demonstration Area - Cabin Camp 1, Main Arts and Crafts Lodge, Prince William Forest Park, Triangle, Prince William County, VA

  1. Refrigeration Plant, North Elevation, Second Floor Plan, East Elevation, Ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Refrigeration Plant, North Elevation, Second Floor Plan, East Elevation, Ground Floor Plan, Section A-A - Kennecott Copper Corporation, On Copper River & Northwestern Railroad, Kennicott, Valdez-Cordova Census Area, AK

  2. Elevations and Floor Plan of Shed No. 1, Elevations and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Elevations and Floor Plan of Shed No. 1, Elevations and Floor Plan of Work Shed, Elevations and Floor Plan of Garage - Roberts-Dolezal Farmstead, 75 miles northeast of the intersection of CR27 and FM 1722, Garrett, Ellis County, TX

  3. 75 FR 70061 - Dealer Floor Plan Pilot Program Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-16

    ... ADMINISTRATION Dealer Floor Plan Pilot Program Meeting AGENCY: U.S. Small Business Administration (SBA). ACTION... agenda for a meeting regarding the Dealer Floor Plan Pilot Program established in the Small Business Jobs Act of 2010. The meeting will be open to the public. DATES: The Dealer Floor Plan Pilot...

  4. Side Elevation; 1/4 Plans of Floor Framing, Floor Planking, Roof ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Side Elevation; 1/4 Plans of Floor Framing, Floor Planking, Roof Framing and Roof; Longitudinal Section, Cross Section, End Elevation - Eames Covered Bridge, Spanning Henderson Creek, Oquawka, Henderson County, IL

  5. Second floor plan. (Also includes a roof plan and finish ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Second floor plan. (Also includes a roof plan and finish schedule.) March Air Force Base, Riverside, California, Combat Operations Center, Combat Operations Building. By Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 13, approved March, 1962; specifications no. OCI-62-66; D.O. series AW 1596/13, Rev. "C"; file drawer 1290. Last revised 7 February 1984. Roof plan scale one-sixteenth inch to one foot; second floor plan scale one-eighth inch to one foot. 28.75x41 inches. pencil on paper - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

  6. 29. Historic American Buildings Survey Ground floor Plan Framing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. Historic American Buildings Survey Ground floor Plan - Framing and seating Original Plan by Benjamin H. Latrobe 1816 Copy of plan in Church Office - St. John's Church, Sixteenth & H Streets Northwest, Washington, District of Columbia, DC

  7. Equipment Location Plan, partial first floor plan. (Includes identification of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Equipment Location Plan, partial first floor plan. (Includes identification of each separate CPU, tape drive, hard drive, printer, keyboard, etc., within the data processing center in the southwest part of the first floor.) March Air Force Base, Riverside, California, Combat Operations Center, 465-L EDTCC/EDLCC. By International Electric Corporation, Paramus, New Jersey (3/5/62); for Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 85, approved March, 1962; specifications no. OCI-62-66; D.O. series AW 1596/85, Rev. "A"; file drawer 1290. Last revised 3 October 1966. Scale one-quarter inch to one foot. 28.75x40.5 inches. ink on linen - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

  8. 9. Photographic copy of first and second floor plans, undated, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Photographic copy of first and second floor plans, undated, Department of the Air Force, Air Defense Command Installations, Washington, D.C., in possession of Selfridge Base Museum, Mt. Clemens, Michigan. FLOOR PLANS. - Selfridge Field, Building No. 509, Sugarbush Road east of West Perimeter Road, Mount Clemens, Macomb County, MI

  9. 6. Photographic copy of floor plan drawing, dated August 18, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Photographic copy of floor plan drawing, dated August 18, 1968, Department of the Air Force Air Defense Command Installations, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. FLOOR PLAN BLDG. 1585. - Selfridge Field, Building No. 1585, South of East Joy Boulevard, west of Taxiway C, Mount Clemens, Macomb County, MI

  10. Photographic copy of floor plan drawing, dated March 7, 1968, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of floor plan drawing, dated March 7, 1968, Department of the Air Force Air Defense Command Installations, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. FLOOR PLAN BLDG. 1575 - Selfridge Field, Building No. 1575, South of East Joy Boulevard, west of Taxiway C, Mount Clemens, Macomb County, MI

  11. 7. Photographic copy of floor plan drawing, dated September 26, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photographic copy of floor plan drawing, dated September 26, 1975, Selfridge ANG Base, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. FLOOR PLAN BLDG. 1583. - Selfridge Field, Building Nos. 1582, 1583, 1584, South of East Joy Boulevard, west of Taxiway C, Mount Clemens, Macomb County, MI

  12. 6. Photographic copy of floor plan drawing, dated August 10, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Photographic copy of floor plan drawing, dated August 10, 1968, Selfridge ANG Base, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. FLOOR PLANS BLDGS. 1582 & 1584. - Selfridge Field, Building Nos. 1582, 1583, 1584, South of East Joy Boulevard, west of Taxiway C, Mount Clemens, Macomb County, MI

  13. Floor Plans Fuel Tank Support, Fuel Platform, and LOX ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Floor Plans - Fuel Tank Support, Fuel Platform, and LOX Platform Plans - Marshall Space Flight Center, F-1 Engine Static Test Stand, On Route 565 between Huntsville and Decatur, Huntsville, Madison County, AL

  14. ETR, TRA642. FLOOR PLAN UNDER BALCONY ON CONSOLE FLOOR. MOTORGENERATOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR, TRA-642. FLOOR PLAN UNDER BALCONY ON CONSOLE FLOOR. MOTOR-GENERATOR SETS AND OTHER ELECTRICAL EQUIPMENT. PHILLIPS PETROLEUM COMPANY ETR-D-1781, 7/1960. INL INDEX NO. 532-0642-00-706-020384, REV. 1. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  15. ETR ELECTRICAL BUILDING, TRA648. FLOOR PLANS FOR FIRST FLOOR AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR ELECTRICAL BUILDING, TRA-648. FLOOR PLANS FOR FIRST FLOOR AND BASEMENT. SECTIONS. KAISER ETR-5528-MTR-648-A-2, 12/1955. INL INDEX NO. 532-0648-00-486-101402, REV. 6. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  16. 29. FLOOR PLAN OF WASTE CALCINATION FACILITY SHOWING MAIN ABOVEGRADE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. FLOOR PLAN OF WASTE CALCINATION FACILITY SHOWING MAIN ABOVE-GRADE FLOOR LEVEL. INEEL DRAWING NUMBER 200-0633-00-287-106354. FLUOR NUMBER 5775-CPP-633-A-4. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

  17. Floor Plan, Axonometric View, Site Location Key, Cesar Chavez Fasting ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Floor Plan, Axonometric View, Site Location Key, Cesar Chavez Fasting Room Diagram - Forty Acres, Tomasa Zapata Mireles Co-op Building , 30168 Garces Highway (Northwest Corner of Garces Highway and Mettler Avenue), Delano, Kern County, CA

  18. One Bedroom Units: Floor Plan, South Elevation (As Built), North ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    One Bedroom Units: Floor Plan, South Elevation (As Built), North Elevation (As Built), Section A-A (As Built), Section AA (Existing) - Aluminum City Terrace, East Hill Drive, New Kensington, Westmoreland County, PA

  19. 9. BUILDING 65 ADDITION. LASER SAFETY TEAM. FLOOR PLAN, ELEVATIONS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. BUILDING 65 ADDITION. LASER SAFETY TEAM. FLOOR PLAN, ELEVATIONS, ETC. March 21, 1973 - Frankford Arsenal, Building No. 65, South of Tacony Street between Bridge Street & tracks of former Pennsylvania Railroad, Philadelphia, Philadelphia County, PA

  20. STRUCTURAL FLOOR PLAN, SHEET 2 OF 6. Oregon Inlet ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STRUCTURAL FLOOR PLAN, SHEET 2 OF 6. - Oregon Inlet Coast Guard Station, Northern end of Pea Island, East side of State Road 1257, 0.3 mile North of North Carolina Highway 12, Rodanthe, Dare County, NC

  1. Plan of the entresol (third floor) of James H. Windrim ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Plan of the entresol (third floor) of James H. Windrim and George Summers’s competition design for the New Masonic Temple, Philadelphia, 1867 - Masonic Temple, 1 North Broad Street, Philadelphia, Philadelphia County, PA

  2. Photographic copy of floor plan, undated, Civil Engineers Office, in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of floor plan, undated, Civil Engineers Office, in possession of Selfridge Base Civil Engineers Office, Mt. Clemens, Michigan - Selfridge Field, Building No. 833, West of Mulberry Street north of George Avenue, Mount Clemens, Macomb County, MI

  3. 8. Photocopy of Station Grounding drawing showing floor plans (from ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. Photocopy of Station Grounding drawing showing floor plans (from the BPA Engineering Vault, Drawing 005319, 3 May 1939) - Bonneville Power Administration South Bank Substation, I-84, South of Bonneville Dam Powerhouse, Bonneville, Multnomah County, OR

  4. 75. SAC control center underground structure middle floor plan, drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    75. SAC control center underground structure middle floor plan, drawing number 32-02-03, dated 1 February, 1955 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  5. 72. SAC control center underground structure lower floor plan, drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    72. SAC control center underground structure lower floor plan, drawing number 32-02-03, dated 1 February 1955 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  6. 77. SAC control center administrative section basement floor plan, drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    77. SAC control center administrative section basement floor plan, drawing number not listed, dated 1 February, 1955 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  7. 78. SAC control center aboveground addition partial first floor plan, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    78. SAC control center aboveground addition partial first floor plan, drawing number AW30-02-09, dated 15 October, 1962 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  8. 76. SAC control center underground structure upper floor plan, drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    76. SAC control center underground structure upper floor plan, drawing number 32-02-03, dated 1 February, 1955 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  9. 79. SAC control center administration section first floor plan, drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    79. SAC control center administration section first floor plan, drawing number 32-02-03, dated 1 February, 1955 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  10. 80. SAC control center administration section third floor plan, drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    80. SAC control center administration section third floor plan, drawing number 32-02-03, dated 1 February, 1955 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  11. 9. PHOTOCOPY, FOUNDATION AND FLOORING PLANS FOR ADMINISTRATION BUILDING. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. PHOTOCOPY, FOUNDATION AND FLOORING PLANS FOR ADMINISTRATION BUILDING. - NIKE Missile Base SL-40, Administration Building, East central portion of base, southeast of Mess Hall, northeast of HIPAR Equipment Building, Hecker, Monroe County, IL

  12. 18. Power plant engine piping floor plan, sheet 71 of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Power plant engine piping floor plan, sheet 71 of 130 - Naval Air Station Fallon, Power Plant, 800 Complex, off Carson Road near intersection of Pasture & Berney Roads, Fallon, Churchill County, NV

  13. 8. PHOTOCOPY, ARCHITECTURAL FLOOR PLAN AND DETAIL DRAWING OF UNDERGROUND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. PHOTOCOPY, ARCHITECTURAL FLOOR PLAN AND DETAIL DRAWING OF UNDERGROUND STORAGE MAGAZINES AND LAUNCHER-LOADER ASSEMBLIES. - NIKE Missile Base SL-40, Underground Storage Magazines & Launcher-Loader Assemblies, Southwesternmost end of launch area, Hecker, Monroe County, IL

  14. A&M. TAN607 floor plans. Shows three floor levels of pool, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 floor plans. Shows three floor levels of pool, hot shop, and warm shop. Includes view of pool vestibule, personnel labyrinth, location of floor rails, and room numbers of office areas, labs, instrument rooms, and stairways. This drawing was re-drawn to show as-built features in 1993. Ralph M. Parsons 902-3-ANP-607-A 96. Date of original: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106748 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  15. FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP601), SECOND FLOOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP-601), SECOND FLOOR SHOWING PROCESS MAKEUP AREA AND EIGHTEEN CELLS AND ADJOINING REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING COLD LAB, DECONTAMINATION ROOM, MULTICURIE CELL ROOM, AND OFFICES. TO LEFT ARE LABORATORY BUILDING (CPP-602) AND MAINTENANCE BUILDING (CPP-630). INL DRAWING NUMBER 200-0601-00-706-051980. ALTERNATE ID NUMBER CPP-E-1980. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  16. FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP601), FIRST FLOOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP-601), FIRST FLOOR SHOWING SAMPLE CORRIDORS AND EIGHTEEN CELLS AND ADJOINING REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING REMOTE ANALYTICAL FACILITIES LAB, DECONTAMINATION ROOM, AND MULTICURIE CELL ROOM. TO LEFT ARE LABORATORY BUILDING (CPP-602) AND MAINTENANCE BUILDING (CPP-630). INL DRAWING NUMBER 200-0601-00-706-051979. ALTERNATE ID NUMBER CPP-E-1979. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  17. FIRST FLOOR PLAN AND SCHEDULES. United Engineering Company Ltd., Alameda ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR PLAN AND SCHEDULES. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. First floor plan, door transom schedule, interior finish schedule, sash schedule, exterior color schedule, and location plot plan. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. Al of 8 sheets, Plan no. 10,007. Scale 1/8 inch to the foot. March 18, 1942, last revised 9/25/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Office Building No. 137, 2900 Main Street, Alameda, Alameda County, CA

  18. SECOND FLOOR AND ROOF PLANS. United Engineering Company Ltd., Alameda ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SECOND FLOOR AND ROOF PLANS. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. Second floor plan, and roof plan. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. A2 of 8 sheets, Plan no. 10,007. Scale 1/8 inch to the foot. March 18, 1942, last revised 9/22/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Office Building No. 137, 2900 Main Street, Alameda, Alameda County, CA

  19. 5. Photographic copy of architectural floor plans for Officers' Quarters ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photographic copy of architectural floor plans for Officers' Quarters "A" & "B": Taylor & Barnes, Architects & Engineers, 803 W. Third Street, Los Angeles California, O.C.E. Office of Civil Engineer Job No. Muroc ESA 210-48 and 210-49, Military Construction: Muroc Flight Test Base, Muroc, California, Warehouses and Additional Housing for Officers: Officers Quarters, Floor Plan, Foundation Plan & Details, Sheet No. 12 of 16, May 1945. Reproduced from the holdings of the National Archives, Pacific Southwest Region - Edwards Air Force Base, North Base, Officers' Quarters A, North Base Road, Boron, Kern County, CA

  20. 24. VIEW OF THE SECOND FLOOR PLAN. ENRICHED URANIUM AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. VIEW OF THE SECOND FLOOR PLAN. ENRICHED URANIUM AND STAINLESS STEEL WEAPONS COMPONENT PRODUCTION-RELATED ACTIVITIES OCCURRED PRIMARILY ON THE SECOND FLOOR. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

  1. 9. Historic American Buildings Survey Photocopy PRINCIPAL FLOOR PLAN, CHAMBER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Historic American Buildings Survey Photocopy PRINCIPAL FLOOR PLAN, CHAMBER PLAN, ORIGINAL DRAWINGS, HENRY AUSTIN, ARCHITECT Restricted: Permission for use must be obtained in writing from Beinecke Rare Book Library, Yale University, New Haven, Connecticut. - James Dwight Dana House, 24 Hillhouse Avenue, New Haven, New Haven County, CT

  2. 11. Historic American Buildings Survey Photocopy PRINCIPAL FLOOR PLAN, SOUTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. Historic American Buildings Survey Photocopy PRINCIPAL FLOOR PLAN, SOUTH SIDE ELEVATION ARCHITECT'S ORIGINAL PLAN Restricted: Not to be reproduced without written permission from Beinecke Rare Books Library, Yale University, New Haven, Connecticut - John Pitkin Norton House, 52 Hillhouse Avenue, New Haven, New Haven County, CT

  3. 5. ARCHITECTURAL ELEVATIONS AND FLOOR PLAN OF GAS HOUSE, SHEET ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. ARCHITECTURAL ELEVATIONS AND FLOOR PLAN OF GAS HOUSE, SHEET 1 OF 1, 8' X 10' NEGATIVE AND PRINT MADE FROM COPIES OF ORIGINAL PLANS, MAY 18, 1936, WALLOWA-WHITMAN NATIONAL FOREST SUPERVISOR'S, OFFICE, BAKER CITY, OREGON. - Wallowa Ranger Station, Gas House, 602 First Street, Wallowa, Wallowa County, OR

  4. 8. FLOOR PLANS OF FIRE EQUIPMENT BUILDING, SHEET 2 OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. FLOOR PLANS OF FIRE EQUIPMENT BUILDING, SHEET 2 OF 2, 8' X 10' NEGATIVE AND PRINT MADE FROM COPIES OF ORIGINAL PLANS, MAY 6, 1936, WALLOWA-WHITMAN NATIONAL FOREST SUPERVISOR'S OFFICE, BAKER CITY, OREGON. - Wallowa Ranger Station, Fire Equipment Building, 602 First Street, Wallowa, Wallowa County, OR

  5. 18. Photographic copy of floor plan, dated January 5, 1958, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Photographic copy of floor plan, dated January 5, 1958, Howard, Needled, Tammen & Bergendoff, Architects-Engineers, Kansas City, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. ALERT HANGAR 566 GENERAL PLAN AND SECTION (SHEET 22 OF 43). - Selfridge Field, Building No. 3566, Ammo Road northeast of Taxiway A, Mount Clemens, Macomb County, MI

  6. Towards Object Driven Floor Plan Extraction from Laser Point Cloud

    NASA Astrophysics Data System (ADS)

    Babacan, K.; Jung, J.; Wichmann, A.; Jahromi, B. A.; Shahbazi, M.; Sohn, G.; Kada, M.

    2016-06-01

    During the last years, the demand for indoor models has increased for various purposes. As a provisional step to proceed towards higher dimensional indoor models, powerful and flexible floor plans can be utilised. Therefore, several methods have been proposed that provide automatically generated floor plans from laser point clouds. The prevailing methodology seeks to attain semantic enhancement of a model (e.g. the identification and labelling of its components) built upon already reconstructed (a priori) geometry. In contrast, this paper demonstrates preliminary research on the possibility to directly incorporate semantic knowledge, which is itself derived from the raw data during the extraction, into the geometric modelling process. In this regard, we propose a new method to automatically extract floor plans from raw point clouds. It is based on a hierarchical space partitioning of the data, integrated with primitive selection actuated by object detection. First, planar primitives corresponding to vertical architectural structures are extracted using M-estimator SAmple and Consensus (MSAC). The set of the resulting line segments are refined by a selection process through a novel door detection algorithm, considering optimization of prior information and fitness to the data. The selected lines are used as hyperlines to partition the space into enclosed areas. Finally, a floor plan is extracted from these partitions by Minimum Description Length (MDL) hypothesis ranking. The algorithm is applied on a real mobile laser scanner dataset and the results are evaluated both in terms of door detection and consecutive floor plan extraction.

  7. MTRETR MAINTENANCE SHOP, TRA653. FLOOR PLAN FOR FIRST FLOOR: MACHINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR-ETR MAINTENANCE SHOP, TRA-653. FLOOR PLAN FOR FIRST FLOOR: MACHINE SHOP, ELECTRICAL AND INSTRUMENT SHOP, TOOL CRIB, ELECTRONIC SHOP, LOCKER ROOM, SPECIAL TEMPERATURE CONTROLLED ROOM, AND OFFICES. "NEW" ON DRAWING REFERS TO REVISION OF 11/1956 DRAWING ON WHICH AREAS WERE DESIGNATED AS "FUTURE." HUMMEL HUMMEL & JONES 810-MTR-ETR-653-A-7, 5/1957. INL INDEX NO. 532-0653-00-381-101839, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  8. A&M. TAN607 floor plan for first floor. Shows stepped door ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 floor plan for first floor. Shows stepped door plug design from hot shop into special services cubicle, cubicle windows, and other details. This drawing was re-drawn to show as-built conditions in 1985. Ralph M. Parsons 902-3-ANP-607-A 99. Date of original: January 1955. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106751 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  9. 4. FLOOR PLAN AND SECTIONS, ADDITION TO POWER HOUSE. United ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. FLOOR PLAN AND SECTIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., Alameda Shipyard. Also includes plot plan at 1 inch to 100 feet. John Hudspeth, architect, foot of Main Street, Alameda, California. Sheet 3. Plan no. 10,548. Scale 1/4 inch and h inch to the foot. April 30, 1945, last revised 6/22/45. pencil on vellum - United Engineering Company Shipyard, Boiler House, 2900 Main Street, Alameda, Alameda County, CA

  10. This photographic copy of an engineering drawing shows floor plans, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    This photographic copy of an engineering drawing shows floor plans, sections and elevations of Building E-86, with details typical of the steel frame and "Transite" building construction at JPL Edwards Facility. California Institute of Technology, Jet Propulsion Laboratory, Facilities Engineering and Construction Office: "Casting & Curing, Building E-86, Floor Plan, Elevations & Section," drawing no. E86/6, 25 February 1977. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California - Jet Propulsion Laboratory Edwards Facility, Casting & Curing Building, Edwards Air Force Base, Boron, Kern County, CA

  11. Floor Plans Engine Removal Platform, Hold Down Arm Platform, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Floor Plans - Engine Removal Platform, Hold Down Arm Platform, Hydraulic Equipment Platforms, Isometric Cutaway of Engine Removal Platform, Isometric Cutaway of Hold Down Arm Platform, Isometric Cutaway of Hydraulic Platforms and Engine Support System Access - Marshall Space Flight Center, Saturn V S-IC Static Test Facility, West Test Area, Huntsville, Madison County, AL

  12. ARCHITECTURAL FLOOR PLAN OF PROCESS AND ACCESS AREAS HOT PILOT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ARCHITECTURAL FLOOR PLAN OF PROCESS AND ACCESS AREAS HOT PILOT PLANT (CPP-640). INL DRAWING NUMBER 200-0640-00-279-111679. ALTERNATE ID NUMBER 8952-CPP-640-A-2. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  13. 41. 'Firing Pier, Second Floor Plan, Section No. 2,' submitted ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. 'Firing Pier, Second Floor Plan, Section No. 2,' submitted 29 December 1941 by John Brackett, Consulting Engineer, to Public Works Department, Bureau of Yards & Docks. PW Drawing 3867-46, Y&D Drawing 190841. Scale 1/4' = 1'. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  14. 40. 'Firing Pier, Second Floor Plan, Section No. 1,' submitted ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    40. 'Firing Pier, Second Floor Plan, Section No. 1,' submitted 29 December 1941 by John Brackett, Consulting Engineer, to Public Works Department, Bureau of Yards & Docks. PW Drawing 3866-46, Y&D Drawing 190840. Scale 1/4' = 1'. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  15. 39. 'Firing Pier, First Floor Plan, Section No. 4,' submitted ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    39. 'Firing Pier, First Floor Plan, Section No. 4,' submitted 29 December 1941 by John Brackett, Consulting Engineer, to Public Works Department, Bureau of Yards & Docks. PW Drawing 3865-46, Y&D Drawing 190839. Scale 1/4' = 1'. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  16. 36. 'Firing Pier, First Floor Plan, Section No. 1,' submitted ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    36. 'Firing Pier, First Floor Plan, Section No. 1,' submitted 29 December 1941 by John Brackett, Consulting Engineer, to Public Works Department, Bureau of Yards & Docks. PW Drawing 3862-46, Y&D Drawing 190836. Scale 1/4' = 1'. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  17. 38. 'Firing Pier, First Floor Plan, Section No. 3,' submitted ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    38. 'Firing Pier, First Floor Plan, Section No. 3,' submitted 29 December 1941 by John Brackett, Consulting Engineer, to Public Works Department, Bureau of Yards & Docks. PW Drawing 3864-46, Y&D Drawing 190838. Scale 1/4' = 1'. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  18. 42. 'Firing Pier, Second Floor Plan, Section No. 3,' submitted ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. 'Firing Pier, Second Floor Plan, Section No. 3,' submitted 29 December 1941 by John Brackett, Consulting Engineer, to Public Works Department, Bureau of Yards & Docks. PW Drawing 3868-46, Y&D Drawing 190842. Scale 1/4' = 1'. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  19. 37. 'Firing Pier, First Floor Plan, Section No. 2,' submitted ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. 'Firing Pier, First Floor Plan, Section No. 2,' submitted 29 December 1941 by John Brackett, Consulting Engineer, to Public Works Department, Bureau of Yards & Docks. PW Drawing 3863-46, Y&D Drawing 190837. Scale 1/4' = 1. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  20. 43. 'Firing Pier, Third and Fourth Floors and Roof Plan,' ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    43. 'Firing Pier, Third and Fourth Floors and Roof Plan,' submitted 29 December 1941 by John Brackett, Consulting Engineer, to Public Works Department, Bureau of Yards & Docks. PW Drawing 3869-46, Y&D Drawing 190843. Scale 1/4' = 1'. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  1. Plan of the principal (second) floor of James H. Windrim ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Plan of the principal (second) floor of James H. Windrim and George Summers’s competition design for the New Masonic Temple, Philadelphia, 1867. The exterior wall outline of the architects’ Early Norman alternative design is shown overlaid across the left third of the drawing. - Masonic Temple, 1 North Broad Street, Philadelphia, Philadelphia County, PA

  2. 7. Photographic copy of floor plan sketch, undated, Selfridge Air ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photographic copy of floor plan sketch, undated, Selfridge Air National Guard Base Civil Engineers Office in possession of Selfridge Base Civil Engineers Office, Mt. Clemens, Michigan. - Selfridge Field, Building No. 1514, Schoolhouse Road north of South Perimeter Road, Mount Clemens, Macomb County, MI

  3. Photographic copy of floor plan drawing, dated August 10, 1968, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of floor plan drawing, dated August 10, 1968, Department of the Air Force Air Defense Command Installations, in possession of Selfridge Base Museum, Mt. Clemens, Michigan - Selfridge Field, Building No. 1580, South of East Joy Boulevard, west of Taxiway C, Mount Clemens, Macomb County, MI

  4. 6. Photographic copy of floor plan, dated August 10, 1968, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Photographic copy of floor plan, dated August 10, 1968, Department of the Air Force Air Defense Command Installation, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. - Selfridge Field, Building No. 1576, South of East Joy Boulevard, west of Taxiway C, Mount Clemens, Macomb County, MI

  5. 7. Photographic copy of floor plan drawing, dated August 10, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photographic copy of floor plan drawing, dated August 10, 1968, Department of the Air Force Air Defense Command Installations, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. - Selfridge Field, Building No. 592, South of East Joy Boulevard, west of Taxiway C, Mount Clemens, Macomb County, MI

  6. 35. Photographic copy of second floor plan of Bowditch Hall, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    35. Photographic copy of second floor plan of Bowditch Hall, Alfred Hopkins & Associates, 1943. Drawing on file at Caretaker Site Office, Naval Undersea Warfare Center, New London. Copyright-free. - Naval Undersea Warfare Center, Bowditch Hall, 600 feet east of Smith Street & 350 feet south of Columbia Cove, West bank of Thames River, New London, New London County, CT

  7. 36. Photographic copy of third floor plan of Bowditch Hall, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    36. Photographic copy of third floor plan of Bowditch Hall, Alfred Hopkins & Associates, 1943. Drawing on file at Caretaker Site Office, Naval Undersea Warfare Center, New London. Copyright-free. - Naval Undersea Warfare Center, Bowditch Hall, 600 feet east of Smith Street & 350 feet south of Columbia Cove, West bank of Thames River, New London, New London County, CT

  8. 34. Photographic copy of first floor plan of Bowditch Hall, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. Photographic copy of first floor plan of Bowditch Hall, Alfred Hopkins & Associates, 1943. Drawing on file at Caretaker Site Office, Naval Undersea Warfare Center, New London. Copyright-free. - Naval Undersea Warfare Center, Bowditch Hall, 600 feet east of Smith Street & 350 feet south of Columbia Cove, West bank of Thames River, New London, New London County, CT

  9. 18. EXISTING FIRST FLOOR PLAN. MONOMOY POINT LT. STATION, MASS., ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. EXISTING FIRST FLOOR PLAN. MONOMOY POINT LT. STATION, MASS., SHOWING PROPOSED ALTERATION AND IMPROVEMENT OF DWELLING. No. 1343. Sheet 5 of 5. July 1899. - Monomoy Point Light Station, Approximately 3500 feet Northeast Powder Hole Pond, Monomoy National Wildlife Refuge, Chatham, Barnstable County, MA

  10. 15. SECOND FLOOR PLAN. MONOMOY POINT LT. STATION, MASS., SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. SECOND FLOOR PLAN. MONOMOY POINT LT. STATION, MASS., SHOWING PROPOSED ALTERATION AND IMPROVEMENT OF DWELLING. No. 1343. SHEET 2 OF 5. July 1899. - Monomoy Point Light Station, Approximately 3500 feet Northeast Powder Hole Pond, Monomoy National Wildlife Refuge, Chatham, Barnstable County, MA

  11. 14. FIRST FLOOR PLAN. MONOMOY POINT LT. STATION, MASS., SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. FIRST FLOOR PLAN. MONOMOY POINT LT. STATION, MASS., SHOWING PROPOSED ALTERATION AND IMPROVEMENT OF DWELLING. No. 1343. SHEET 1 of 5. July 1899. - Monomoy Point Light Station, Approximately 3500 feet Northeast Powder Hole Pond, Monomoy National Wildlife Refuge, Chatham, Barnstable County, MA

  12. 1. FLOOR PLANS (from sheet of drawings titled 'Alterations for ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. FLOOR PLANS (from sheet of drawings titled 'Alterations for Miss Alice Lee, San Diego California, 1911.' Original in the Art Galleries, University of California, Santa Barbara. Copied for the HABS Collection, 1975) - Alice Lee House, 3578 Seventh Avenue, San Diego, San Diego County, CA

  13. 61. Photocopy of Engine Room Floor Plan, White Alder. The ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    61. Photocopy of Engine Room Floor Plan, White Alder. The Niagara Shipbuilding Corp. Engineering Department, Buffalo, New York. Coast Guard Headquarters Drawing No. 540-WAGL-1604-10, dated February 1943; revised January 1963. Original drawing property of the U.S. Coast Guard. - U.S. Coast Guard Cutter WHITE HEATH, USGS Integrated Support Command Boston, 427 Commercial Street, Boston, Suffolk County, MA

  14. South elevation and main floor plan. San Bernardino Valley Union ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    South elevation and main floor plan. San Bernardino Valley Union Junior College, Science Building. Includes chemistry and botany departments. Howard E. Jones, Architect, San Bernardino, California. Sheet 2, job no. 311. Scale 1/8 inch to the foot. February 15, 1927. - San Bernardino Valley College, Life Science Building, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  15. 28. Photograph of a line drawing. 'ARCHITECTURAL FLOOR PLANS, SECTIONS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. Photograph of a line drawing. 'ARCHITECTURAL FLOOR PLANS, SECTIONS & ELEVATIONS, BUILDING C, PLANT B.' Holston Ordnance Works, Tennessee Eastman Corporation. July 7, 1942. Delineator: F. F. Stone. Drawing # 7651-1003.001. - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

  16. 25. Photographic copy of First Floor Plan (The Ballinger Company, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. Photographic copy of First Floor Plan (The Ballinger Company, April 12, 1955). In files of the City of Philadelphia, Division of Aviation, Terminal E, Philadelphia International Airport. Reprinted with permission of the Division of Aviation. - TWA Maintenance Hangar, South side of Tinicum Island Road, Philadelphia International Airport, Philadelphia, Philadelphia County, PA

  17. 26. Photographic copy of Second Floor Plan (The Ballinger Company, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. Photographic copy of Second Floor Plan (The Ballinger Company, April 12, 1955), In files of the City of Philadelphia. Division of Aviation, Terminal E. Philadelphia International Airport. Reprinted with permission of Division of Aviation. - TWA Maintenance Hangar, South side of Tinicum Island Road, Philadelphia International Airport, Philadelphia, Philadelphia County, PA

  18. 21. VIEW OF THE FIRST FLOOR PLAN. THE ORIGINAL DRAWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. VIEW OF THE FIRST FLOOR PLAN. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Non-Nuclear Production Facility, South of Cottonwood Avenue, west of Seventh Avenue & east of Building 460, Golden, Jefferson County, CO

  19. 31. FLOOR PLANS OF WASTE CALCINATION FACILITY. SHOWS ACCESS CORRIDOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    31. FLOOR PLANS OF WASTE CALCINATION FACILITY. SHOWS ACCESS CORRIDOR AT MEZZANINE AND LOWER LEVELS. INEEL DRAWING NUMBER 200-0633-00-287-106352. FLUOR NUMBER 5775-CPP-633-A-2. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

  20. 30. FLOOR PLANS OF WASTE CALCINATION FACILITY. SHOWS LEVELS ABOVE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. FLOOR PLANS OF WASTE CALCINATION FACILITY. SHOWS LEVELS ABOVE GRADE AND AT LEVEL OF OPERATING CORRIDOR. INEEL DRAWING NUMBER 200-0633-00-287-106351. FLUOR NUMBER 5775-CPP-633-A-1. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

  1. TEMPORARY STORAGE BUILDING NO. 776; FLOOR PLAN, SECTION, AND ELECTRIC ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    TEMPORARY STORAGE BUILDING NO. 776; FLOOR PLAN, SECTION, AND ELECTRIC LIGHTING SERVICE (Also includes a plot plan). Navy Yard, Mare Island, California. P.W. (Public Works) drawing no. 18048-1, approved May 5, 1942; file no. 776-CR-1. Various scales. Revised May 19, 1942. 42 cm x 72 cm. Pencil on velllum. - Mare Island Naval Shipyard, Temporary Storage, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

  2. Weather support area, floor plan and details. ("Alter COC, Bldg. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Weather support area, floor plan and details. ("Alter COC, Bldg. 2605, Weather Support Area, Floor Plan & Details" Also includes a site plan and a finish schedule. The exact location of this construction is obscure, but it appears to be the enclosure of space at the north end of room 101, the "Display Area" or "War Room") Strategic Air Command, Civil Engineering. Drawing no. B-1081, sheet no. 1 of 2, 9 July 1968; project no. MAR-132-8; CE-562; file drawer 2605-9, also 1315. Various scales. 29x41 inches. pencil on paper - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

  3. This photocopy of an engineering drawing shows the floor plan ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    This photocopy of an engineering drawing shows the floor plan of the Liner Lab, including room functions. Austin, Field & Fry, Architects Engineers, 22311 West Third Street, Los Angeles 57, California: Edwards Test Station Complex Phase II, Jet Propulsion Laboratory, California Institute of Technology, Edwards Air Force Base, Edwards, California: "Liner Laboratory, Floor Plan and Schedules," drawing no. E33/4-2, 26 June 1962. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California - Jet Propulsion Laboratory Edwards Facility, Liner Laboratory, Edwards Air Force Base, Boron, Kern County, CA

  4. GUARD HOUSE AND BARRACKS; SECOND FLOOR PLAN AND DOOR FRAME ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GUARD HOUSE AND BARRACKS; SECOND FLOOR PLAN AND DOOR FRAME AND WINDOW DETAILS. Navy Department, Bureau of Yards & Docks, Navy Yard, Mar Island, CA. Albert F. Roller, Architect, San Francisco, CA. H.J. Brunnier, Structural Engineer, Sharon Building, San Francisco, CA. Sheet 2 of 15, accompanying specification Noy-4675. Submitted May 8, 1941, last revised July 14, 1941. Yards & Docks drawing no. 160687; P.W. (Public Works) drawing no. 10388-26; file no. 930-CR-4. Scale one eighth inch to one foot (floor plan) and 3 inches to one foot (details). 73 cm x 129 cm. Ink on vellum - Mare Island Naval Shipyard, Guard House & Barracks, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

  5. North elevation and second floor plan. San Bernardino Valley Union ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    North elevation and second floor plan. San Bernardino Valley Union Junior College, Science Building. Includes physics, geology, and zoology departments shelving. Howard E. Jones, Architect, San Bernardino, California. Sheet 4, job no. 311. Scales 1/8 inch to the foot (elevations) and 1/2 inch to the foot (shelving). February 15, 1927. - San Bernardino Valley College, Life Science Building, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  6. 8. "TEST STAND, ARCHITECTURAL, FLOOR PLANS AND SCHEDULES." Specifications No. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. "TEST STAND, ARCHITECTURAL, FLOOR PLANS AND SCHEDULES." Specifications No. ENG-04-353-55-72; Drawing No. 60-0912; sheet 22 of 148; file no. 1320/73. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract no. 4338, no change. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  7. Repair Air Conditioning, COC Bldg 2605, First Floor Plan. By ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Repair Air Conditioning, COC Bldg 2605, First Floor Plan. By Strategic Air Command, Civil Engineering. Drawing no. R-156, sheet no. 2 of 4, 15 August 1968; project no. MAR-125-8;CE-572; file drawer 2605-6. Scale one-eighth inch to one foot. 29x41 inches. pencil on paper 405 - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

  8. 3. Photograph of a line drawing. SHEET 3, FLOOR PLAN, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Photograph of a line drawing. SHEET 3, FLOOR PLAN, DETAILS OF S EAST AND S WEST CORNERS, TYPICAL DETAIL AT COLUMN U-49 and U-25, TYPICAL SECTION THRU R. R. TRACK IN S WEST CORNER, SECTION THRU PIPE PIT AT COLUMN #P-1; 9-16-1940. Assembly Building for Tank Plant for the Chrysler Corporation, Macomb County, Michigan. Delineator: H. C. B. - Detroit Arsenal, 6501 East Eleven Mile Road, Warren, Macomb County, MI

  9. Second floor plan. San Bernardino Valley Union Junior College, Auditorium ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Second floor plan. San Bernardino Valley Union Junior College, Auditorium Building. G. Stanley Wilson, Architect, A.I.A., Riverside, California. Sheet 4, job no. 692. Scale 1/8 inch to the foot. March 27, 1936. Application no. 1446, approved by the State of California, Department of Public Works, Division of Architecture, April 22, 1936. - San Bernardino Valley College, Auditorium, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  10. 7. "CONTROL BUILDING; FLOOR PLAN, ELEVATIONS AND DETAILS." Specifications No. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. "CONTROL BUILDING; FLOOR PLAN, ELEVATIONS AND DETAILS." Specifications No. OC1-59-53; Drawing No. 5841-A-1; D.O. SERIES AW1525/2 Rev. B. Stamped: RECORD DRAWING AS CONSTRUCTED. Below stamp: Contract No. 5619, Rev. B. Date: 7-8-59. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Firing Control Building, Test Area 1-100, northeast end of Test Area 1-100 Road, Boron, Kern County, CA

  11. 22. VIEW OF THE BASEMENT FLOOR PLAN. THE BASEMENT TUNNELS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. VIEW OF THE BASEMENT FLOOR PLAN. THE BASEMENT TUNNELS WERE DESIGNED AS FALLOUT SHELTERS AND USED FOR STORAGE. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

  12. 22. VIEW OF THE BASEMENT AND MEZZANINE FLOOR PLANS. ALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. VIEW OF THE BASEMENT AND MEZZANINE FLOOR PLANS. ALL MECHANICAL AND ELECTRICAL UTILITY EQUIPMENT IS CONTAINED IN THE BASEMENT. THE MEZZANINE CONTAINS OFFICES. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Non-Nuclear Production Facility, South of Cottonwood Avenue, west of Seventh Avenue & east of Building 460, Golden, Jefferson County, CO

  13. Third floor plan. San Bernardino Valley Union Junior College, Auditorium ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Third floor plan. San Bernardino Valley Union Junior College, Auditorium Building. Also includes one small detail drawing of ladder from fly gallery to grid iron. G. Stanley Wilson, Architect, A.I.A., Riverside, California. Sheet 5, Job no. 692. Scales 1/8 inch to the foot (main plan) and 3/4 inch to the foot for the detail. March 27, 1936. Application no. 1446, approved by the State of California, Department of Public Works, Division of Architecture, April 22, 1936. - San Bernardino Valley College, Auditorium, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  14. Floor plan and front elevation. San Bernardino Valley Union Junior ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Floor plan and front elevation. San Bernardino Valley Union Junior College, Library Building. Also includes detail of concrete grille; sections QQ and TT; and detail of bulletin board. Howard E. Jones, Architect, San Bernardino, California. Sheet 2, job no. 315. Scales 1/8 inch to the foot (plan, elevation), 1/2 inch to the foot (sections), and 1/4 inch to the foot (bulletin board). No date given on sheet (probably March or April, 1927). - San Bernardino Valley College, Library, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  15. First floor plan. San Bernardino Valley Union Junior College, Auditorium. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    First floor plan. San Bernardino Valley Union Junior College, Auditorium. Also includes six small detail drawings. G. Stanley Wilson, Architect, A.I.A., Riverside, California. Sheet 3, Job no. 692. Scales 1/8 inch to the foot (main plan) and various scales for the details. March 27, 1936. Application no. 1446, approved by the State of California, Department of Public Works, Division of Architecture, April 22, 1936. - San Bernardino Valley College, Auditorium, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  16. Photographic copy of floor plans for Bachelor Officers' Quarters (Tl) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of floor plans for Bachelor Officers' Quarters (T-l) known as the "Desert Rat Hotel" in the early days of the Muroc Flight Test Base (North Base). The plans show the layout of quarters, lavatories, mess as well as, the cooling system installation. Contract W-509-Eng 2937, Military Construction; Muroc Bombing Range, Muroc Lake, Calif; Materiel Test Site, Officers Quarters, Evaporative Coolers, Sheet 5 of 11, May 1942. Reproduced from the holdings of the National Archives, Pacific Southwest Region - Edwards Air Force Base, North Base, Bachelor Officers' Quarters T-1, Second & C Streets, Boron, Kern County, CA

  17. 7. FLOOR PLAN, PLOT PLAN, ELEVATIONS, SHEET NO. 11044/1 OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. FLOOR PLAN, PLOT PLAN, ELEVATIONS, SHEET NO. 1-10-44/1 OF 11. (NOTE: BUILDINGS 821-823 WERE CONSTRUCTED FROM A SINGLE SET OF PLANS. SOME DRAWINGS ARE TYPICAL OF ALL 3 STRUCTURES, CERTAIN OTHER DRAWINGS IN THE SAME SET ARE BUILDING-SPECIFIC.) - Oakland Army Base, Storehouse Type, Ukraine & Maritime Streets, Oakland, Alameda County, CA

  18. 20. VIEW OF THE BASEMENT FLOOR PLAN. THE BASEMENT AREA ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. VIEW OF THE BASEMENT FLOOR PLAN. THE BASEMENT AREA INCLUDES A UTILITY ROOM, PROCESS WASTE STORAGE AND MAINTENANCE AREAS, AND THE ENTRANCE TO AN UNDERGROUND TUNNEL LEADING TO BUILDING 881. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  19. First Floor Plan U.S. Veterans Hospital, Jefferson Barracks, Therapeutic ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    First Floor Plan - U.S. Veterans Hospital, Jefferson Barracks, Therapeutic Exercise Building, VA Medical Center, Jefferson Barracks Division 1 Jefferson Barracks Drive, Saint Louis, Independent City, MO

  20. First floor plan. (Also includes a door schedule and door ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    First floor plan. (Also includes a door schedule and door elevations). March Air Force Base, Riverside, California, Combat Operations Center, Combat Operations Building. By Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 12, approved March 1962; specifications no. OCI-62-66; D.O. series AW 1596/12, Rev. "C"; file drawer 1290. Last revised 25 August 1975. Scale one-eighth inch to one foot. 28.5x 41 inches. pencil on paper - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

  1. Sustainable green inner-wall design for flexible floor plan

    NASA Astrophysics Data System (ADS)

    Tawil, N. M.; Husaini, H. A.; Ani, A. I.; Basri, H.; Saleh, R. M.

    2013-06-01

    The rises of house price in the market is so drastic that it effects the younger generation nowadays especially young executives and young couples who could not afford to buy their first home. The factors that determine the house price presumably are the interior and exterior structural of the house itself. So to lessen the house price, we have to minimize the usage of wet construction thus the idea of having a sustainable green inner-wall implemented into the house with a flexible floor plan. This concept is user-friendly as it is built on needs and the ownership's affordability. They can design the interior of the house however they want with using minimal cost because it does not involve wet construction.

  2. 137. ARAII Building ARA602 floor plan as it appeared in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    137. ARA-II Building ARA-602 floor plan as it appeared in 1980 when electrical modifications were being made. Shows partial layout of floor plan. EG&G Idaho, Inc. 1570-ARA-II-602-E-3. Date: April 1980. Ineel index code no. 070--0602-10-220-159761. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  3. Middle-Level Preservice Mathematics Teachers' Mental Representations of Classroom Floor Plans

    ERIC Educational Resources Information Center

    Matteson, Shirley M.; Ganesh, Bibi S.; Coward, Fanni L.; Patrick, Patricia

    2012-01-01

    This study reports the results of an innovative assignment in which preservice teachers' mental representations were examined through drawing floor plans of an "ideal middle-level mathematics classroom." The 41 middle-level mathematics preservice teachers created two floor plans, one at the beginning of the semester and the other for the course…

  4. 7. Photographic copy of original construction drawing, ELECTRICAL 1ST AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photographic copy of original construction drawing, ELECTRICAL 1ST AND 2ND FLOOR PLANS, SHEET 10 of 11, DRAWING NO. 35-03-05 SF 5/1677, U.S. Army Engineer District, Detroit, Corps of Engineers, 9 June, 1959, on file Selfridge Base Museum. - Selfridge Field, Building No. 1041, West of E Street, north of D Street, Mount Clemens, Macomb County, MI

  5. LOFT. Containment and service building (TAN650) ground floor plan. Penetrations ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LOFT. Containment and service building (TAN-650) ground floor plan. Penetrations in dome wall. Shielded personnel maze at airlock door. Reactor chamber floor hatches and holddowns. Rails in concrete floor. Kaiser engineers 6413-11-STEP/LOFT-650-A-2. Date: October 1964. INEEL index code no. 036-650-00-486-122214 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  6. PROCESS WATER BUILDING, TRA605. FIRST FLOOR PLAN WITH STRUCTURAL DETAILS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PROCESS WATER BUILDING, TRA-605. FIRST FLOOR PLAN WITH STRUCTURAL DETAILS. FLOOR SLABS AND HATCHES. SHOWER/LOCKER ROOM. STAIRWAYS. TWENTY-INCH-THICK WALL DIVIDES SUMP AND SEAL TANK CHAMBERS FROM REST OF FLOOR. BLAW-KNOX 3150-805-3, 1/1951. INL INDEX NO. 531-0605-62-098-100659, REV. 1. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  7. HOT CELL BUILDING, TRA632. FIRST FLOOR FOUNDATION PLAN SHOWS SECTIONALIZED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    HOT CELL BUILDING, TRA-632. FIRST FLOOR FOUNDATION PLAN SHOWS SECTIONALIZED FLOOR LOADINGS AND CONCRETE SLAB THICKNESSES, A TYPICAL FEATURE OF NUCLEAR ARCHITECTURE. IDAHO OPERATIONS OFFICE MTR-632-IDO-2, 11/1952. INL INDEX NO. 531-0632-62-396-110561, REV. 1. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  8. ETR CONTROL BUILDING, TRA647. FLOOR PLANS FOR BASEMENT, FIRST AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR CONTROL BUILDING, TRA-647. FLOOR PLANS FOR BASEMENT, FIRST AND SECOND FLOORS. METAL PANEL WALL. NAMES OF ROOMS. STAIRWAYS. WALL CONSTRUCTION LEGEND. KAISER ETR-5528-MTR-647-A-6, 12/1955. INL INDEX NO. 532-0647-00-486-101357, REV. 9. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  9. Ground Floor Plan (Section B) U.S. Veterans Hospital, Jefferson ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Ground Floor Plan (Section B) - U.S. Veterans Hospital, Jefferson Barracks, Spinal Cord Injury Unit and Tuberculosis Neuropsychiatric Building, VA Medical Center, Jefferson Barracks Division 1 Jefferson Barracks Drive, Saint Louis, Independent City, MO

  10. Second Floor Plan (Section B) U.S. Veterans Hospital, Jefferson ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Second Floor Plan (Section B) - U.S. Veterans Hospital, Jefferson Barracks, Spinal Cord Injury Unit and Tuberculosis Neuropsychiatric Building, VA Medical Center, Jefferson Barracks Division 1 Jefferson Barracks Drive, Saint Louis, Independent City, MO

  11. First Floor Plan (Section B) U.S. Veterans Hospital, Jefferson ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    First Floor Plan (Section B) - U.S. Veterans Hospital, Jefferson Barracks, Spinal Cord Injury Unit and Tuberculosis Neuropsychiatric Building, VA Medical Center, Jefferson Barracks Division 1 Jefferson Barracks Drive, Saint Louis, Independent City, MO

  12. Second Floor Plan (Section A) U.S. Veterans Hospital, Jefferson ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Second Floor Plan (Section A) - U.S. Veterans Hospital, Jefferson Barracks, Spinal Cord Injury Unit and Tuberculosis Neuropsychiatric Building, VA Medical Center, Jefferson Barracks Division 1 Jefferson Barracks Drive, Saint Louis, Independent City, MO

  13. Ground Floor Plan (Section A) U.S. Veterans Hospital, Jefferson ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Ground Floor Plan (Section A) - U.S. Veterans Hospital, Jefferson Barracks, Spinal Cord Injury Unit and Tuberculosis Neuropsychiatric Building, VA Medical Center, Jefferson Barracks Division 1 Jefferson Barracks Drive, Saint Louis, Independent City, MO

  14. First Floor Plan (Section A) U.S. Veterans Hospital, Jefferson ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    First Floor Plan (Section A) - U.S. Veterans Hospital, Jefferson Barracks, Spinal Cord Injury Unit and Tuberculosis Neuropsychiatric Building, VA Medical Center, Jefferson Barracks Division 1 Jefferson Barracks Drive, Saint Louis, Independent City, MO

  15. 12. Architectural Floor Plans, 233S, U.S. Atomic Energy Commission, Hanford ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Architectural Floor Plans, 233-S, U.S. Atomic Energy Commission, Hanford Atomic Products Operations, General Electric Company, Dwg. H-2-30464, 1956. - Reduction-Oxidation Complex, Plutonium Concentration Facility, 200 West Area, Richland, Benton County, WA

  16. Floor Plans and Stair Section U.S. Veterans Hospital, Jefferson ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Floor Plans and Stair Section - U.S. Veterans Hospital, Jefferson Barracks, Medical Officer in Charge Residence, VA Medical Center, Jefferson Barracks Division 1 Jefferson Barracks Drive, Saint Louis, Independent City, MO

  17. Photocopy of floor plan of the C.B. & Q. R.R ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of floor plan of the C.B. & Q. R.R roundhouse and locomotive shops. June 1980. - Chicago, Burlington & Quincy Railroad, Roundhouse & Shops, Broadway & Spring Streets, Aurora, Kane County, IL

  18. 73. New addition building 500 floor plan, drawing number AW600201, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    73. New addition building 500 floor plan, drawing number AW-60-02-01, dated 26 January, 1970 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  19. PUMP HOUSE FOR MTR WELL NO. 1, TRA601. FLOOR PLAN, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PUMP HOUSE FOR MTR WELL NO. 1, TRA-601. FLOOR PLAN, ELEVATIONS, SECTION SHOWING WELL CASING, ROOF FRAMING PLAN. AS BUILT. WELL HOUSE FOR WELL NO. 2, TRA-602, WAS IDENTICAL IN ALL PARTICULARS EXCEPT FLOOR DIMENSIONS AND ARRANGEMENT OF PUMP AND ELECTRICAL EQUIPMENT INSIDE. IDAHO OPERATIONS OFFICE MTR-601-IDO-1, 12/1954. INL INDEX NO. 531-0601-00-396-110463, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  20. 131. ARAII Administration building (ARA613) floor plans for first and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    131. ARA-II Administration building (ARA-613) floor plans for first and second floors. Includes roof plan. Shows use of rooms as offices, laboratory, conference room. F.C. Torkelson Company 842-area/SL-1-613-A-1. Date: October 1958. Ineel index code no. 070-0613-00-851-150718. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  1. A Novel Method of Orbital Floor Reconstruction Using Virtual Planning, 3-Dimensional Printing, and Autologous Bone.

    PubMed

    Vehmeijer, Maarten; van Eijnatten, Maureen; Liberton, Niels; Wolff, Jan

    2016-08-01

    Fractures of the orbital floor are often a result of traffic accidents or interpersonal violence. To date, numerous materials and methods have been used to reconstruct the orbital floor. However, simple and cost-effective 3-dimensional (3D) printing technologies for the treatment of orbital floor fractures are still sought. This study describes a simple, precise, cost-effective method of treating orbital fractures using 3D printing technologies in combination with autologous bone. Enophthalmos and diplopia developed in a 64-year-old female patient with an orbital floor fracture. A virtual 3D model of the fracture site was generated from computed tomography images of the patient. The fracture was virtually closed using spline interpolation. Furthermore, a virtual individualized mold of the defect site was created, which was manufactured using an inkjet printer. The tangible mold was subsequently used during surgery to sculpture an individualized autologous orbital floor implant. Virtual reconstruction of the orbital floor and the resulting mold enhanced the overall accuracy and efficiency of the surgical procedure. The sculptured autologous orbital floor implant showed an excellent fit in vivo. The combination of virtual planning and 3D printing offers an accurate and cost-effective treatment method for orbital floor fractures. PMID:27137437

  2. A Novel Method of Orbital Floor Reconstruction Using Virtual Planning, 3-Dimensional Printing, and Autologous Bone.

    PubMed

    Vehmeijer, Maarten; van Eijnatten, Maureen; Liberton, Niels; Wolff, Jan

    2016-08-01

    Fractures of the orbital floor are often a result of traffic accidents or interpersonal violence. To date, numerous materials and methods have been used to reconstruct the orbital floor. However, simple and cost-effective 3-dimensional (3D) printing technologies for the treatment of orbital floor fractures are still sought. This study describes a simple, precise, cost-effective method of treating orbital fractures using 3D printing technologies in combination with autologous bone. Enophthalmos and diplopia developed in a 64-year-old female patient with an orbital floor fracture. A virtual 3D model of the fracture site was generated from computed tomography images of the patient. The fracture was virtually closed using spline interpolation. Furthermore, a virtual individualized mold of the defect site was created, which was manufactured using an inkjet printer. The tangible mold was subsequently used during surgery to sculpture an individualized autologous orbital floor implant. Virtual reconstruction of the orbital floor and the resulting mold enhanced the overall accuracy and efficiency of the surgical procedure. The sculptured autologous orbital floor implant showed an excellent fit in vivo. The combination of virtual planning and 3D printing offers an accurate and cost-effective treatment method for orbital floor fractures.

  3. HOT CELL BUILDING, TRA632. FLOOR PLAN OF EXPANSION SHOWS LOCATION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    HOT CELL BUILDING, TRA-632. FLOOR PLAN OF EXPANSION SHOWS LOCATION OF NEW CELLS, "HEAVY" CELL AT WEST END, "LIGHT" CELLS AT EAST. MOCK-UP AND STORAGE AREAS IN SOUTH HALF OF FLOOR. H.K. FERGUSON 895-MTR-ETR-632-A1, 12/1958. INL INDEX NO. 531-0632-00-279-101924, REV. 4. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  4. ETR, TRA642 AND TRA647. FLOOR PLANS FOR FIRST AND SECOND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR, TRA-642 AND TRA-647. FLOOR PLANS FOR FIRST AND SECOND FLOORS OF THE OFFICE AND CONTROL BUILDING ALONG THE NORTH WALL OF THE ETR BUILDING. HEALTH PHYSICS, OPERATIONS, AND CONTROL ROOM. AIRLOCK DOOR. OFFICES. STAIRWAY LOCATIONS. KAISER ETR-5528-MTR-642-A-3, 10/1955. INL INDEX NO. 532-0642-00-100911, REV. 0. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  5. PROCESS WATER BUILDING, TRA605. FLOOR AND ROOF PLANS FOR SECOND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PROCESS WATER BUILDING, TRA-605. FLOOR AND ROOF PLANS FOR SECOND FLOOR. DETAILS OF CONCRETE ROOF SLABS. FLASH EVAPORATOR SUPPORTS AND PIPE OPENINGS TO TANKS BELOW. NOTE SPECIFIES THAT EQUIPMENT IS TO BE INSTALLED BEFORE ERECTION OF ROOF AND WALLS. BLAW-KNOX 3150-805-4, 1/1951. INL INDEX NO. 531-0605-62-098-100660, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  6. ADM. Fuel Pump House (TAN611). Elevations, floor plan. Drawing includes ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ADM. Fuel Pump House (TAN-611). Elevations, floor plan. Drawing includes elevation and plans for "H.M." structures (Hose Storage?). Ralph M. Parsons 902-2-ANP-611-A 78 Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 035-0611-00-693-106741 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  7. ETR, TRA642. CONSOLE FLOOR ALLOCATION PLAN CA. 1958. GENERAL ELECTRIC ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR, TRA-642. CONSOLE FLOOR ALLOCATION PLAN CA. 1958. GENERAL ELECTRIC (GEFP) AND KNOLLS ATOMIC POWER LABORATORY (KAPL) CONSUME MOST OF THE SPACE. PHILLIPS PETROLEUM COMPANY ETR-D-1293, 1958. INL INDEX NO. 532-0642-00-706-020209, REV. K. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  8. SAFETY AND SECURITY BUILDING, TRA614. FLOOR, ROOF, AND FOUNDATION PLANS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SAFETY AND SECURITY BUILDING, TRA-614. FLOOR, ROOF, AND FOUNDATION PLANS. ROOM FUNCTIONS. DOOR AND ROOM FINISH SCHEDULE. BLAW-KNOX 3150-814-1, 3/1950. INL INDEX NO. 531-0614-00-098-100702, REV. 6. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  9. 6. PHOTOCOPY, FOUNDATION AND FLOOR PLAN DRAWING OF E.M. BARRACKS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. PHOTOCOPY, FOUNDATION AND FLOOR PLAN DRAWING OF E.M. BARRACKS, N.C.O. AND OFFICERS QUARTERS. - NIKE Missile Base SL-40, Barracks No. 1, North end of base, southest of Basketball Court & northwest of Barracks No. 2, Hecker, Monroe County, IL

  10. 10. Fifth floor plan,published in 'Architectural Record',Vol 31,No. 4, April ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Fifth floor plan,published in 'Architectural Record',Vol 31,No. 4, April 1912,p. 356 (?),courtesy of Art Institute of Chicago, permission to duplicate courtesy of 'Architectural Record' - Chicago City Hall, 121 North LaSalle Street, Chicago, Cook County, IL

  11. 9. First floor plan,published in 'Architectural Record',Vol 31,No. 4, April ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. First floor plan,published in 'Architectural Record',Vol 31,No. 4, April 1912,p 356,courtesy of the Art Institute of Chicago,permission to duplicate courtesy of'Architectural Record' - Chicago City Hall, 121 North LaSalle Street, Chicago, Cook County, IL

  12. ETR HEAT EXCHANGER BUILDING, TRA644. FLOOR PLAN AND SECTIONS. PUMP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR HEAT EXCHANGER BUILDING, TRA-644. FLOOR PLAN AND SECTIONS. PUMP CUBICLES WITH PUMP MOTORS OUTSIDE CUBICLES. HEAT EXCHANGER EQUIPMENT. COOLANT PIPE TUNNEL ENTERS FROM REACTOR BUILDING. KAISER ETR-5582-MTR-644-A-3, 2/1956. INL INDEX NO. 532-0644-00-486-101294, REV. 6. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  13. 148. ARAIII Reactor building (ARA608) Floor plan. Shows location of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    148. ARA-III Reactor building (ARA-608) Floor plan. Shows location of reactor, heater, and mechanical loop pits; mechanical and electrical equipment rooms; and other work areas. Aerojet-general 880-area/GCRE-608-A-1. Date: February 1958. Ineel index code no. 063-0608-00-013-102612. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  14. FAST CHOPPER DETECTOR HOUSE, TRA665. SECOND FLOOR ADDITION: PLAN, SECTIONS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FAST CHOPPER DETECTOR HOUSE, TRA-665. SECOND FLOOR ADDITION: PLAN, SECTIONS AND DETAILS AS ADDED TO THE EXISTING CHOPPER HOUSE IN 1962. F.C. TORKELSON 842-MTR-665-S-3, 4/1962. INL INDEX NO. 531-0665-60-851-150997, REV. 3. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  15. FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP601) BASEMENT SHOWING PROCESS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP-601) BASEMENT SHOWING PROCESS CORRIDOR AND EIGHTEEN CELLS. TO LEFT IS LABORATORY BUILDING (CPP-602). INL DRAWING NUMBER 200-0601-00-706-051981. ALTERNATE ID NUMBER CPP-E-1981. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  16. ARCHITECTURAL FLOOR PLAN OF OPERATING AREA HOT PILOT PLANT (CPP640). ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ARCHITECTURAL FLOOR PLAN OF OPERATING AREA HOT PILOT PLANT (CPP-640). INL DRAWING NUMBER 200-0640-00-279-111678. ALTERNATE ID NUMBER 8952-CPP-640-A-1. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  17. FIRST FLOOR PLAN OF REMOTE ANALYTICAL FACILITY (CPP627) SHOWING REMOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR PLAN OF REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING REMOTE ANALYTICAL LABORATORY, DECONTAMINATION ROOM, AND MULTICURIE CELL ROOM. INL DRAWING NUMBER 200-0627-00-008-105065. ALTERNATE ID NUMBER 4272-14-102. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  18. LPT. EBOR (TAN646). Floor plan for new helium management wing. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LPT. EBOR (TAN-646). Floor plan for new helium management wing. Detail of sample vault and basement switch room. Kaiser engineers EBOR/GA-646-A-101. Date: May 1963. INEEL index code no. 037-0646-00-486-119115 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  19. ADM. Warehouse (TAN604) Floor plan. General warehouse and chemical storage. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ADM. Warehouse (TAN-604) Floor plan. General warehouse and chemical storage. Ralph M. Parsons 902-2-ANP-604-A 55. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 035-0604-00-693-106727 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  20. A&M. Demineralization plant, TAN649. Floor plan, elevation details. Ralph M. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. Demineralization plant, TAN-649. Floor plan, elevation details. Ralph M. Parsons 1480-4-ANP/GE-3-649-A-1. Date: October 1958. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0649-00-693-107439 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  1. LPT. Guard House (TAN642). Elevations, floor plan, sections, details. Ralph ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LPT. Guard House (TAN-642). Elevations, floor plan, sections, details. Ralph M. Parsons 1229-12 ANP/GE-7-642-A-S-H7V-1. November 1956. Approved by INEEL Classification Office for public release. INEEL index code no. 038-0642-00-693-107306 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  2. A&M. TAN607. Foundation plan for hot shop floor and pool. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607. Foundation plan for hot shop floor and pool. Tunnels to turntable. Motor pit. Ralph M. Parsons 902-3-ANP-607-S128. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-62-693-160722 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  3. FET. Control and equipment building, TAN630. Main floor plan. Control ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FET. Control and equipment building, TAN-630. Main floor plan. Control room. Room numbers and functions. Ralph M. Parsons. 1229-2-ANP/GE-5-630-A-2. Date: March 1957. Approved by INEEL Classification Office for public release. INEEL index code no. 036-0630-00-693-107081 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  4. IET. Control and equipment building (TAN620) floor plan. Schedule of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    IET. Control and equipment building (TAN-620) floor plan. Schedule of furniture and equipment. Ralph M. Parsons 902-4-ANP-A 320. Date: February 1954. Approved by INEEL Classification Office for public release. INEEL index code no. 035-0620-00-693-106905 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  5. LPT. Shield test facility (TAN645 and 646). Floor plan and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LPT. Shield test facility (TAN-645 and -646). Floor plan and room names. Ralph M. Parsons 1229-17 ANP/GE-6-645-A-1. April 1957. Approved by INEEL Classification Office for public release. INEEL index code no. 037-0645/0646-00-693-107347 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  6. ADM. Change House (TAN606). Elevations and floor plan. Room Names. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ADM. Change House (TAN-606). Elevations and floor plan. Room Names. Ralph M. Parsons 902-2-ANP-606-A 65. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 035-0606-00-693-106733 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  7. MTR WING, TRA604. FIRST FLOOR PLAN. ENTRY LOBBY, MACHINE SHOP, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR WING, TRA-604. FIRST FLOOR PLAN. ENTRY LOBBY, MACHINE SHOP, INSTRUMENT SHOP, COUNTING ROOM, HEALTH PHYSICS LAB, LABS AND OFFICES, STORAGE, SHIPPING AND RECEIVING. BLAW-KNOX 3150-4-2, 7/1950. INL INDEX NO. 053-604-00-099-100008, REV. 7. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  8. MTR, TRA603. SUBBASEMENT FLOOR PLAN. INLET/OUTLET TUNNELS FOR COOLANT WATER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR, TRA-603. SUB-BASEMENT FLOOR PLAN. INLET/OUTLET TUNNELS FOR COOLANT WATER (NORTH SIDE) AND AIR (SOUTH SIDE). RABBIT CANAL AND BULKHEADS. SUMPS AND DRAINS. BLAW-KNOX 3150-3-7, 3/1950. INL INDEX NO. 531-0603-00-098-100006, REV. 4. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  9. Using Claris CAD To Develop a Floor Plan. High-Technology Training Module.

    ERIC Educational Resources Information Center

    Pawlowicz, Bruce; Johnson, Tom

    This learning module for a high school architectural drafting course introduces students to the use of Claris CAD (Computer Aided Drafting) to develop a floor plan. The six sections of the module are the following: module objectives, content outline, teaching methods, student activities, resource list, and evaluation (pretest, posttest). Student…

  10. 16. Photocopy of drawing, floor system plan, Bridge No. 79B, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Photocopy of drawing, floor system plan, Bridge No. 79B, Main & Washington Sts., So. Norwalk, Ct., N. Y. Division, N.Y., N.H. and H.R.R., dated April 23, 1895. Original on file with Metro North Commuter Railroad. - South Norwalk Railroad Bridge, South Main & Washington Streets, Norwalk, Fairfield County, CT

  11. MTR, TRA603. BASEMENT FLOOR PLAN. REACTOR SHIELDING, CANAL AND RABBIT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR, TRA-603. BASEMENT FLOOR PLAN. REACTOR SHIELDING, CANAL AND RABBIT CANAL, DEEP WELL STORAGE. DECONTAMINATION ROOM, VAULT, MONITOR ROOM, OFFICE, STAIRWAYS. BLAW-KNOX 3150-803-1, 7/1950. INL INDEX NO. 531-0603-00-098-100560, REV. 6. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  12. CAFETERIA, TRA616. FLOOR PLAN SEATING 70. EAST AND SOUTH ELEVATIONS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAFETERIA, TRA-616. FLOOR PLAN SEATING 70. EAST AND SOUTH ELEVATIONS. SPECIFICATION NOTES. BLAW-KNOX 3150-816-1, 3/1951. INL INDEX NO. 531-0616-00-098-100704, REV. 1. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  13. A&M. Actuator Building, TAN615. Floor plan, elevations, sections. Test and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. Actuator Building, TAN-615. Floor plan, elevations, sections. Test and decontamination areas. Pits. Change room. General electric IDA-615-1070. Date: December 1956. INEEL index no. 034-0615-00-309-217511 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  14. 48. Master plan of 7th floor, building 1, U.S. Naval ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. Master plan of 7th floor, building 1, U.S. Naval supply activities, New York, Brooklyn, New York, public works department, March 2, 1953. Drawing #BK-S1-7. Scale 1/16=1. - U.S. Navy Fleet Supply Base, Storehouse No. 1, 830 Third Avenue, Brooklyn, Kings County, NY

  15. STEAM PLANT, TRA609. FIRST FLOOR PLAN. STEAM UNITS, OFFICE, MAINTENANCE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STEAM PLANT, TRA-609. FIRST FLOOR PLAN. STEAM UNITS, OFFICE, MAINTENANCE AREA, UTILITY ROOM FOR ELECTRIC GEAR, AIR INTAKE AND FILTERING, DIESEL GENERATOR. BLAW-KNOX 3150-809-2, 8/1950. INL INDEX NO. 531-0609-00-098-100684, REV. 3. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  16. 138. ARAII Building ARA606 floor plan for remodel as Inel ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    138. ARA-II Building ARA-606 floor plan for remodel as Inel Welding Laboratory. Shows room divisions and welding stations to be installed. Aerojet Nuclear Company 1375-ARA-II-606-E-2. Date: June 1976. Ineel index code no. 070-0606-10-400-156552. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  17. SECOND FLOOR PLAN OF REMOTE ANALYTICAL FACILITY (CPP627) WARM LABORATORY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SECOND FLOOR PLAN OF REMOTE ANALYTICAL FACILITY (CPP-627) WARM LABORATORY ROOM, DECONTAMINATION ROOM, HOT CHEMISTRY LABORATORY, AND MULTICURIE CELL ROOM. INL DRAWING NUMBER 200-0627-00-098-105066. ALTERNATE ID NUMBER 4272-14-103. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  18. A&M. TAN607 second floor plan for cold assembly area. Metallurgical ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 second floor plan for cold assembly area. Metallurgical lab, chemistry lab, nuclear instrument lab, equipment rooms. Ralph M. Parsons 902-ANP-607-A 102. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-693-106754 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  19. LOFT. Containment and service building (TAN650) basement floor plan. Basement ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LOFT. Containment and service building (TAN-650) basement floor plan. Basement airlock, shielded roadway, service areas, connection to control building. Kaiser engineers 6413-11-STEP/LOFT-650-A-1. Date: October 1964. INEEL index code no. 036-650-00-416-122213 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  20. ADM. Service Building (TAN603). Floor plan. Names of functional areas. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ADM. Service Building (TAN-603). Floor plan. Names of functional areas. Ralph M. Parsons 902-2-ANY-603-A 43. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 033-0603-00-693-106718 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  1. REACTOR SERVICES BUILDING, TRA635. FIRST FLOOR PLAN. MOCKUP AND PRESSURE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    REACTOR SERVICES BUILDING, TRA-635. FIRST FLOOR PLAN. MOCK-UP AND PRESSURE TEST AREAS. ISSUE ROOM, LAUNDRY, STORAGE. IDO MTR-635-IDO-5-A, 6/1953. INL INDEX NO. 531-0635-00-396-110588, REV. 6. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  2. REACTOR SERVICES BUILDING, TRA635. SECOND FLOOR PLAN. WOMEN'S REST ROOM. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    REACTOR SERVICES BUILDING, TRA-635. SECOND FLOOR PLAN. WOMEN'S REST ROOM. IDO MTR-635-IDO-6-A, 6/1953. INL INDEX NO. 531-0635-00-396-110589, REV. 1. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  3. A&M. Technical service laboratory in administration building (TAN602). Floor plan, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. Technical service laboratory in administration building (TAN-602). Floor plan, reception desk, door and finish schedules. Ralph M. Parsons 1480-12-ANP/GE-3-602-A-1. INEEL index code no. 033-0602-00-693-107488 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  4. FET. Control and equipment building (TAN630). Basement floor plan. Tunnel ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FET. Control and equipment building (TAN-630). Basement floor plan. Tunnel to hangar (TAN-629). Electrical and chemical services. Ralph M. Parsons 1229-2 ANP/GE-630-A-1. Date: March 1957. Approved by INEEL Classification Office for public release. INEEL index code no. 036-0630-00-693-107080 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  5. 13. Architectural First Floor Plan Buildings 185189 D, U.S. Atomic ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Architectural First Floor Plan Buildings 185-189 D, U.S. Atomic Energy Commission, General Electric Company, Dwg. NO. H-1-11825, 1959. - D-Reactor Complex, Deaeration Plant-Refrigeration Buildings, Area 100-D, Richland, Benton County, WA

  6. The Generation of Building Floor Plans Using Portable and Unmanned Aerial Vehicle Mapping Systems

    NASA Astrophysics Data System (ADS)

    Tsai, G. J.; Chen, Y. L.; Chiang, K. W.; Lai, Y. C.

    2016-06-01

    Indoor navigation or positioning systems have been widely developed for Location-Based Services (LBS) applications and they come along with a keen demand of indoor floor plans for displaying results even improving the positioning performance. Generally, the floor plans produced by robot mapping focus on perceiving the environment to avoid obstacles and using the feature landmarks to update the robot position in the relative coordinate frame. These maps are not accurate enough to incorporate to the indoor positioning system. This study aims at developing Indoor Mobile Mapping System (Indoor MMS) and concentrates on generating the highly accurate floor plans based on the robot mapping technique using the portable, robot and Unmanned Aerial Vehicles (UAV) platform. The proposed portable mapping system prototype can be used in the chest package and the handheld approach. In order to evaluate and correct the generated floor plans from robot mapping techniques, this study builds the testing and calibration field using the outdoor control survey method implemented in the indoor environments. Based on control points and check points from control survey, this study presents the map rectification method that uses the affine transformation to solve the scale and deformation problems and also transfer the local coordinate system into world standard coordinate system. The preliminary results illustrate that the final version of the building floor plan reach 1 meter absolute positioning accuracy using the proposed mapping systems that combines with the novel map rectification approach proposed. These maps are well geo-referenced with world coordinate system thus it can be applied for future seamless navigation applications including indoor and outdoor scenarios.

  7. SPERTI Terminal Building (PER604). Floor plan and sections. Heating system ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SPERT-I Terminal Building (PER-604). Floor plan and sections. Heating system was improved a few months after original proved inadequate. Section A-A shows profile of metal building with low-sloped gable roof. IDO Drawing PER-604-IDO-5. Date: September 1955. INEEL index no. 761-0604-00-396-109180 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

  8. A&M. TAN633. Hot cell floor plans, elevations, sections. Hole schedule ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-633. Hot cell floor plans, elevations, sections. Hole schedule (penetrations through concrete). Swing-door details. Ralph M. Parsons 1229-13-ANP/GE-3-633-A-3. Date: December 1956. Approved by INEEL Classification Office for public release. INNEL index code no. 034-0633-00-693-107317 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  9. A&M. Hot cell addition (TAN633). Floor plan, elevations. Arrangement of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. Hot cell addition (TAN-633). Floor plan, elevations. Arrangement of monorail along corridor, four hot cells, plug access openings, viewing windows, photo darkroom. Ralph M. Parsons 1229-13-ANP/GE-3-633-A-1. Date: December 1956 as redrawn in August 1998. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0633-00-693-107315 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  10. A&M. TAN607 second floor plan for hot shop. Roof of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 second floor plan for hot shop. Roof of pool. Viewing window locations. Special equipment room. This drawing was re-drawn to show conditions in 1994. Ralph M. Parsons 902-3-ANP-607-A 101. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-060-00-693-106753 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  11. A&M. TAN607 third floor plan for hot shop. Crane control ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 third floor plan for hot shop. Crane control rooms and their shielding windows. Plenum. Wall rack for manipulators in hot shop. Ralph M. Parsons 902-3-ANP-607-A 103. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106755 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  12. LPT. Low power test (TAN640 and 641) floor plan. Cells ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LPT. Low power test (TAN-640 and -641) floor plan. Cells 101 and 102, control rooms, shielded counting room, generator room, list of room numbers and names. Door details. Ralph M. Parsons 1229-12 ANP/GE-7-640-A-1. November 1956. Approved by INEEL Classification Office for public release. INEEL index code no. 038-0640-00-693-107274 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  13. 143. ARAIII Control building (ARA607) Floor plan. Shows control room, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    143. ARA-III Control building (ARA-607) Floor plan. Shows control room, contaminated work area, counting and computer room, health physics room, instrument repair room, offices, and other rooms. Aerojet-general 880-area/GCRE-607-A-1. Date: February 1958. Ineel index code no. 063-0607-00-013-102546. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  14. 17. 'Plan of Shafting and Flooring for 1 236'0' ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. 'Plan of Shafting and Flooring for 1 - 236'-0' Single Tr. Thro Draw Span over Sacramento River at Tehama Cal, So. Pac. Co., Phoenix Bridge Co. C.O. 952, Drwg #4, Eng. F.G.L., Scale 1/4' = 1', May 21st, 1898.' - Southern Pacific Railroad Shasta Route, Bridge No. 210.52, Milepost 210.52, Tehama, Tehama County, CA

  15. Instrumentation and control building, architectural, floor plans. Specifications no. Eng043535572; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Instrumentation and control building, architectural, floor plans. Specifications no. Eng-04-353-55-72; Drawing No. 60-09-12' sheet 64 of 148; file no. 1321/15. Stamped: record drawing - as constructed. Below stamp: Contract no. 4338, no change. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Control Center, Test Area 1-115, near Altair & Saturn Boulevards, Boron, Kern County, CA

  16. LPT. Shield test facility (TAN646). Floor plan for water treatment ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LPT. Shield test facility (TAN-646). Floor plan for water treatment room on west facade, tank and filter locations in basement along service tunnel and in coupling station. Ralph M. Parsons 1229-17 ANP/GE-6-646-P-2. April 1957. INEEL Index code no. 037-0645/0646-51-693-107387 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  17. PROCESS WATER BUILDING, TRA605. FLOOR PLAN AND SECTION OF FLASH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PROCESS WATER BUILDING, TRA-605. FLOOR PLAN AND SECTION OF FLASH EVAPORATOR ROOM SHOWING ITS LOCATION ABOVE THE SEAL AND SUMP TANKS. PIPING TAKES WATER FROM SEAL TANK UPWARD TO FLASH EVAPORATORS AND THEN BACK DOWN TO SUMP TANK. BLAW-KNOX 3150-5-6, 8/1950. INL INDEX NO. 531-605-00-098-100011, REV. 3. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  18. Proceedings of the National Conference on the Delivery of Family Planning Services in Rural America (1st, Atlanta, Georgia, October, 1977).

    ERIC Educational Resources Information Center

    Alan Guttmacher Inst., New York, NY.

    Although family planning services in rural America are becoming more accessible to women who need and want them, only one-fourth of low- and marginal-income nonmetropolitan women at risk of unintended pregnancy have been served by organized family planning programs. About 150 participants, generally providers of family planning services in…

  19. PROCESS WATER BUILDING, TRA605. BASEMENT FLOOR PLAN AND STRUCTURAL DETAILS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PROCESS WATER BUILDING, TRA-605. BASEMENT FLOOR PLAN AND STRUCTURAL DETAILS. SUMP TANK (DIAMETER 33 FEET; CAPACITY 100,000 GALLONS) LOCATION IN HIGH ROOF SECTION ON WEST SIDE. REPAIR SHOP AND STORAGE AREA IN LOW-ROOF AREA. WALL DETAILS: THICKNESS OF REINFORCED CONCRETE RANGES FROM 1'-6" TO 2' THICK. FOUNDATIONS FOR FIVE CELLS ENCLOSING PUMPS. BLAW-KNOX 3150-805-2, 12/1950. INL INDEX NO. 531-0605-62-098-100658, REV. 3. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  20. FAST CHOPPER DETECTOR HOUSE, TRA665. FIRST FLOOR, PLAN AND SECTION, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FAST CHOPPER DETECTOR HOUSE, TRA-665. FIRST FLOOR, PLAN AND SECTION, AS PROPOSED FOR MODIFICATION IN 1962. CONCRETE WALLS THREE FEET THICK. EXISTING WINDOWS IN MTR AND DETECTOR HOUSE WALLS WERE TO BE FILLED IN WITH HIGH-DENSITY BRICK. NOTE 20-METER MARK, WHERE THE FAST CHOPPER DETECTOR HAD BEEN LOCATED. F.C. TORKELSON 842-MTR-665-S-2, 4/1962. INL INDEX NO. 531-0665-60-851-150996, REV. 5. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  1. a Schema for Extraction of Indoor Pedestrian Navigation Grid Network from Floor Plans

    NASA Astrophysics Data System (ADS)

    Niu, Lei; Song, Yiquan

    2016-06-01

    The requirement of the indoor navigation related tasks such emergency evacuation calls for efficient solutions for handling data sources. Therefore, the navigation grid extraction from existing floor plans draws attentions. To this, we have to thoroughly analyse the source data, such as Autocad dxf files. Then, we could establish a sounding navigation solution, which firstly complements the basic navigation rectangle boundaries, secondly subdivides these rectangles and finally generates accessible networks with these refined rectangles. Test files are introduced to validate the whole workflow and evaluate the solution performance. In conclusion, we have achieved the preliminary step of forming up accessible network from the navigation grids.

  2. MTR, TRA603. FIRST FLOOR PLAN. REACTOR AT CENTER. TWENTYMETER CHOPPER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR, TRA-603. FIRST FLOOR PLAN. REACTOR AT CENTER. TWENTY-METER CHOPPER HOUSE. COFFIN TURNING ROLLS. REMOVABLE PANEL OVER CANAL ON EAST SIDE. NEW PLUG STORAGE ACCESS. DOOR SCHEDULE INDICATES STEEL (FOR VAULT), WIRE MESH, AND HOLLOW METAL TYPES. STORAGE AND ISSUE ROOM. SAFETY SHOWERS. DOORWAY TO WING, TRA-604. BLAW-KNOX 3150-803-2, 7/1950. INL INDEX NO. 531-0603-00-098-100561, REV. 10. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  3. A&M. TAN607 first floor plan for cold assembly area. Shows ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 first floor plan for cold assembly area. Shows special source vaults, X-ray room, instrument shops, and positions of large machines in component test laboratory. This drawing was re-drawn to show conditions in 1994. Ralph M. Parsons 902-3-ANP-607-A 100. Date of original: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-060-00-693-106752 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  4. BUILDING A196 BARRACKS, SECOND FLOOR PLAN. Naval Guided Missile and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BUILDING A-196 BARRACKS, SECOND FLOOR PLAN. Naval Guided Missile and Tactical Data System School, Naval Schools Command, Mare Island, CA. Milton T. Pflueger, Architect, 580 Market Street, San Francisco, CA. Sheet 127 to 145, specification 36050/61, approved for the Bureau of Yards and Docks, October 26, 1961. Yards and Docks drawing no. 892275; DPWO drawing no. B-75275; file no. 930-CR-2. 72 cm x 98 cm. Sepia tone print - Mare Island Naval Shipyard, Guard House & Barracks, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

  5. BUILDING A196 BARRACKS, FIRST FLOOR PLAN. Naval Guided Missile and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BUILDING A-196 BARRACKS, FIRST FLOOR PLAN. Naval Guided Missile and Tactical Data System School, Naval Schools Command, Mare Island, California. Milton T. Pflueger, Architect, 580 Market Street, San Francisco, CA. Sheet 126 of 145, specification 36050-61, approved for the Bureau of Yards and Docks, October 26, 1961. Yards and Docks drawing no. 892274; DPWO drawing no. B-75274; file no. 930-CR-1. 72 cm x 98 xm. Sepia tone print - Mare Island Naval Shipyard, Guard House & Barracks, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

  6. Notes on the Psychological Basis of Environmental Design: The Right-Left Dimension in Apartment Floor Plans

    ERIC Educational Resources Information Center

    Cunningham, Michael R.

    1977-01-01

    The previously recognized right-left asymmetry in aesthetic balance was applied to preferences in architectural design. Preferences for right-and left-oriented apartments in apartment floor plan layouts were noted in sophomore psychology students. Data examined from preferences of 67 right-handed and 5 left-handed students revealed that…

  7. Hot spot mitigation in microprocessors by application of single phase microchannel heat sink and microprocessor floor planning

    NASA Astrophysics Data System (ADS)

    Chauhan, Anjali

    Poor thermal management in high frequency microprocessors results in thermal and mechanical stresses in the chip due to leakage losses, occurrence of hot spots and large temperature gradients. A micro-fluidics based cooling scheme of single phase microchannel heat sinks is found to be most promising cooling solution. Microchannel heat sinks have high cooling capability because of its high surface area to volume ratio and high heat transfer coefficient. Besides the fluid flow, heat transfer mechanism in microchannel heat sinks is affected by its installation on the microprocessor chip. Since microchannel heat sinks are capable of reducing only the average temperature rise of the microprocessor chip, technique of microprocessor floor planning can be applied to reduce hot spot temperature, mitigate multiple hot spots and reduce large temperature gradients on the surface of microprocessor chip. In this study, adequate installation of the microchannel heat sink on the processor chip has been proposed to extract maximum heat from the device. Microprocessor floor planning has also been explored to obtain an optimum chip floor plan on grounds of low performance penalty, low hot spot temperature and minimum number hot spots. The dependence of maximum hot spot temperature of the chip on pressure gradient across the microchannels has also been discussed.

  8. 40 CFR Table 5 to Subpart IIIii of... - Required Elements of Floor-Level Mercury Vapor Measurement and Cell Room Monitoring Plans

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Mercury Vapor Measurement and Cell Room Monitoring Plans 5 Table 5 to Subpart IIIII of Part 63 Protection... Hazardous Air Pollutants: Mercury Emissions From Mercury Cell Chlor-Alkali Plants Pt. 63, Subpt. IIIII... and Cell Room Monitoring Plans Your Floor-Level Mercury Vapor Measurement Plan required by §...

  9. 40 CFR Table 5 to Subpart IIIii of... - Required Elements of Floor-Level Mercury Vapor Measurement and Cell Room Monitoring Plans

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Mercury Vapor Measurement and Cell Room Monitoring Plans 5 Table 5 to Subpart IIIII of Part 63 Protection... Hazardous Air Pollutants: Mercury Emissions From Mercury Cell Chlor-Alkali Plants Pt. 63, Subpt. IIIII... and Cell Room Monitoring Plans Your Floor-Level Mercury Vapor Measurement Plan required by §...

  10. 40 CFR Table 5 to Subpart IIIii of... - Required Elements of Floor-Level Mercury Vapor Measurement and Cell Room Monitoring Plans

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Mercury Vapor Measurement and Cell Room Monitoring Plans 5 Table 5 to Subpart IIIII of Part 63 Protection... Hazardous Air Pollutants: Mercury Emissions From Mercury Cell Chlor-Alkali Plants Pt. 63, Subpt. IIIII... and Cell Room Monitoring Plans Your Floor-Level Mercury Vapor Measurement Plan required by §...

  11. 40 CFR Table 5 to Subpart IIIii of... - Required Elements of Floor-Level Mercury Vapor Measurement and Cell Room Monitoring Plans

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Mercury Vapor Measurement and Cell Room Monitoring Plans 5 Table 5 to Subpart IIIII of Part 63 Protection... Hazardous Air Pollutants: Mercury Emissions From Mercury Cell Chlor-Alkali Plants Pt. 63, Subpt. IIIII... and Cell Room Monitoring Plans Your Floor-Level Mercury Vapor Measurement Plan required by §...

  12. 40 CFR Table 5 to Subpart IIIii of... - Required Elements of Floor-Level Mercury Vapor Measurement and Cell Room Monitoring Plans

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Mercury Vapor Measurement and Cell Room Monitoring Plans 5 Table 5 to Subpart IIIII of Part 63 Protection... Hazardous Air Pollutants: Mercury Emissions From Mercury Cell Chlor-Alkali Plants Pt. 63, Subpt. IIIII... and Cell Room Monitoring Plans Your Floor-Level Mercury Vapor Measurement Plan required by §...

  13. RadShield: semiautomated shielding design using a floor plan driven graphical user interface.

    PubMed

    DeLorenzo, Matthew C; Wu, Dee H; Yang, Kai; Rutel, Isaac B

    2016-09-08

    The purpose of this study was to introduce and describe the development of RadShield, a Java-based graphical user interface (GUI), which provides a base design that uniquely performs thorough, spatially distributed calculations at many points and reports the maximum air-kerma rate and barrier thickness for each barrier pursuant to NCRP Report 147 methodology. Semiautomated shielding design calculations are validated by two approaches: a geometry-based approach and a manual approach. A series of geometry-based equations were derived giv-ing the maximum air-kerma rate magnitude and location through a first derivative root finding approach. The second approach consisted of comparing RadShield results with those found by manual shielding design by an American Board of Radiology (ABR)-certified medical physicist for two clinical room situations: two adjacent catheterization labs, and a radiographic and fluoroscopic (R&F) exam room. RadShield's efficacy in finding the maximum air-kerma rate was compared against the geometry-based approach and the overall shielding recommendations by RadShield were compared against the medical physicist's shielding results. Percentage errors between the geometry-based approach and RadShield's approach in finding the magnitude and location of the maximum air-kerma rate was within 0.00124% and 14 mm. RadShield's barrier thickness calculations were found to be within 0.156 mm lead (Pb) and 0.150 mm lead (Pb) for the adjacent catheteriza-tion labs and R&F room examples, respectively. However, within the R&F room example, differences in locating the most sensitive calculation point on the floor plan for one of the barriers was not considered in the medical physicist's calculation and was revealed by the RadShield calculations. RadShield is shown to accurately find the maximum values of air-kerma rate and barrier thickness using NCRP Report 147 methodology. Visual inspection alone of the 2D X-ray exam distribution by a medical physicist may not

  14. RadShield: semiautomated shielding design using a floor plan driven graphical user interface.

    PubMed

    DeLorenzo, Matthew C; Wu, Dee H; Yang, Kai; Rutel, Isaac B

    2016-01-01

    The purpose of this study was to introduce and describe the development of RadShield, a Java-based graphical user interface (GUI), which provides a base design that uniquely performs thorough, spatially distributed calculations at many points and reports the maximum air-kerma rate and barrier thickness for each barrier pursuant to NCRP Report 147 methodology. Semiautomated shielding design calculations are validated by two approaches: a geometry-based approach and a manual approach. A series of geometry-based equations were derived giv-ing the maximum air-kerma rate magnitude and location through a first derivative root finding approach. The second approach consisted of comparing RadShield results with those found by manual shielding design by an American Board of Radiology (ABR)-certified medical physicist for two clinical room situations: two adjacent catheterization labs, and a radiographic and fluoroscopic (R&F) exam room. RadShield's efficacy in finding the maximum air-kerma rate was compared against the geometry-based approach and the overall shielding recommendations by RadShield were compared against the medical physicist's shielding results. Percentage errors between the geometry-based approach and RadShield's approach in finding the magnitude and location of the maximum air-kerma rate was within 0.00124% and 14 mm. RadShield's barrier thickness calculations were found to be within 0.156 mm lead (Pb) and 0.150 mm lead (Pb) for the adjacent catheteriza-tion labs and R&F room examples, respectively. However, within the R&F room example, differences in locating the most sensitive calculation point on the floor plan for one of the barriers was not considered in the medical physicist's calculation and was revealed by the RadShield calculations. RadShield is shown to accurately find the maximum values of air-kerma rate and barrier thickness using NCRP Report 147 methodology. Visual inspection alone of the 2D X-ray exam distribution by a medical physicist may not

  15. "Hard Science" for Gifted 1st Graders

    ERIC Educational Resources Information Center

    DeGennaro, April

    2006-01-01

    "Hard Science" is designed to teach 1st grade gifted students accurate and high level science concepts. It is based upon their experience of the world and attempts to build a foundation for continued love and enjoyment of science. "Hard Science" provides field experiences and opportunities for hands-on discovery working beside experts in the field…

  16. 6. 2nd floor where stables used to be; note bottom ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. 2nd floor where stables used to be; note bottom of truss with suspension rods for floor which results in clear span on 1st level - Diebolt Brewing Company Stable, 2695 Pittsburgh Avenue, Cleveland, Cuyahoga County, OH

  17. Sampling and analysis plan for the consolidated sludge samples from the canisters and floor of the 105-K East basin

    SciTech Connect

    BAKER, R.B.

    1999-02-18

    This Sampling and Analysis Plan (SAP) provides direction for sampling of fuel canister and floor Sludge from the K East Basin to complete the inventory of samples needed for Sludge treatment process testing. Sample volumes and sources consider recent reviews made by the Sludge treatment subproject. The representative samples will be characterized to the extent needed for the material to be used effectively for testing. Sampling equipment used allows drawing of large volume sludge samples and consolidation of sample material from a number of basin locations into one container. Once filled, the containers will be placed in a cask and transported to Hanford laboratories for recovery and evaluation. Included in the present SAP are the logic for sample location selection, laboratory analysis procedures required, and reporting needed to meet the Data Quality Objectives (DQOs) for this initiative.

  18. Sampling and analysis plan for sludge located on the floor and in the pits of the 105-K basins

    SciTech Connect

    BAKER, R.B.

    1998-11-20

    This Sampling and Analysis Plan (SAP) provides direction for the sampling of the sludge found on the floor and in the remote pits of the 105-K Basins to provide: (1) basic data for the sludges that have not been characterized to-date and (2) representative Sludge material for process tests to be made by the SNF Project/K Basins sludge treatment process subproject. The sampling equipment developed will remove representative samples of the radioactive sludge from underwater at the K Basins, depositing them in shielded containers for transport to the Hanford Site laboratories. Included in the present document is the basic background logic for selection of the samples to meet the requirements established in the Data Quality Objectives (DQO), HNF-2033, for this sampling activity. The present document also includes the laboratory analyses, methods, procedures, and reporting that will be required to meet the DQO.

  19. Lock No. 1 St. Lucie Canal. Sector gates, internal struts ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Lock No. 1- St. Lucie Canal. Sector gates, internal struts- nose beams. - St. Lucie Canal, St. Lucie Lock No. 1, St. Lucie, Cross State Canal, Okeechobee Intracoastal Waterway, Stuart, Martin County, FL

  20. Performance Plan: Progress Report, 1st Quarter, Fiscal Year 2000.

    ERIC Educational Resources Information Center

    Department of Education, Washington, DC. Student Financial Assistance.

    This report by the Department of Education examines the progress made by the Student Financial Assistance (SFA) program in reaching its objectives. The report notes that for objective 1, customer satisfaction, more than 4 million direct loan records have been processed and over 1 million updates applied since winter 1999; that 84 percent of school…

  1. THEOS: The1st Thailand EO System and

    NASA Astrophysics Data System (ADS)

    Peanvijarnpong, Chanchai

    Thailand has engaged in remote sensing satellite technological and scientific development many years since early 1980s. Thailand Landsat Station was established as a regional center of data processing and dissemination for Thai scientists for data applications. Over the years, GISTDA and Thai user community have been gaining technical experience and expertise in satellite data applications around the country such natural resources and environmental management, forest inventory, forest change detections, soil mapping, land-use and land cover mapping, crop type mapping, coastal shrimp farming, flood zone mapping, base mapping, water and drought management. The Government of Thailand realizes that remote sensing satellite technology is an important mechanism for social and economic development of the country. So the 1st Thailand Earth Observation System (THEOS) development program was approved by the Government since 2003. THEOS system is sub-synchronous satellite orbiting around the earth at 822 km. altitude same as SPOT satellites. It carries two imaging instruments; 2-m Panchromatic telescope with 22 km. swath width and 15-m resolution camera with four-multi-spectral band and 90-km swath wide. THEOS is scheduled to launch around March 2008. A number of technological and scientific activities has been implementing for Thailand and international scientific user community. Therefore THEOS is strong endorsement from the Government of Thailand on the value of remote sensing technology. This paper presents Thailand EO activities including THEOS System and its plans.

  2. EMSL Quarterly Highlights Report: 1st Quarter, FY08

    SciTech Connect

    Showalter, Mary Ann

    2008-01-28

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2007 - December 2007) of Fiscal Year 2008.

  3. EMSL Quarterly Highlights Report: 1st Quarter, Fiscal Year 2009

    SciTech Connect

    Showalter, Mary Ann; Kathmann, Loel E.; Manke, Kristin L.

    2009-02-02

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2008 - December 2008) of Fiscal Year 2009.

  4. ISS Update: 1st Annual ISS R&D Conference

    NASA Video Gallery

    NASA Public Affairs Officer Kelly Humphries talks by phone on Wednesday with Julie Robinson, ISS Program Scientist, about the 1st Annual International Space Station Research and Development Confere...

  5. 1st Baby Born with DNA from 3 Parents

    MedlinePlus

    ... news/fullstory_161176.html 1st Baby Born With DNA From 3 Parents Technique designed to help couples ... be born using a controversial technique that combines DNA from three people -- two women and a man. ...

  6. FDA OKs 1st Drug to Treat Duchenne Muscular Dystrophy

    MedlinePlus

    ... html FDA OKs 1st Drug to Treat Duchenne Muscular Dystrophy Exondys 51 seems to fill unmet need for ... the first drug for a rare form of muscular dystrophy. Exondys 51 (eteplirsen) was granted accelerated approval to ...

  7. Valley Floor

    NASA Technical Reports Server (NTRS)

    2003-01-01

    MGS MOC Release No. MOC2-529, 30 October 2003

    This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows the floor of an ancient valley located near the Pyrrhae Chaos region of Mars. This valley might have been carved by liquid water, but today no evidence remains that a fluid ever flowed through it. Long after the valley formed, its floor was covered by large, windblown, ripple-like dunes. This picture is located near 13.0oS, 31.2oW. The image is illuminated by sunlight from the upper left and covers an area 3 km (1.9 mi) wide.

  8. Dewarless Logging Tool - 1st Generation

    SciTech Connect

    HENFLING,JOSEPH A.; NORMANN,RANDY A.

    2000-08-01

    This report focuses on Sandia National Laboratories' effort to create high-temperature logging tools for geothermal applications without the need for heat shielding. One of the mechanisms for failure in conventional downhole tools is temperature. They can only survive a limited number of hours in high temperature environments. For the first time since the evolution of integrated circuits, components are now commercially available that are qualified to 225 C with many continuing to work up to 300 C. These components are primarily based on Silicon-On-Insulator (SOI) technology. Sandia has developed and tested a simple data logger based on this technology that operates up to 300 C with a few limiting components operating to only 250 C without thermal protection. An actual well log to 240 C without shielding is discussed. The first prototype high-temperature tool measures pressure and temperature using a wire-line for power and communication. The tool is based around the HT83C51 microcontroller. A brief discussion of the background and status of the High Temperature Instrumentation program at Sandia, objectives, data logger development, and future project plans are given.

  9. Antoniadi's Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    16 February 2005 This Mars Global Surveyor (MGS) Orbiter Camera (MOC) image shows landforms on the floor of Antoniadi Crater. The circular features were once meteor impact craters that have been almost completely eroded away.

    Location near: 21.6oN, 297.4oW Image width: 3.0 km (1.9 mi) Illumination from: upper left Season: Northern Summer

  10. Trough Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    3 March 2005 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows boulders on the floor of a wide trough in Memnonia Fossae.

    Location near: 18.8oS, 150.3oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Southern Winter

  11. Floor Chemical Basics.

    ERIC Educational Resources Information Center

    Shaw, Richard

    1998-01-01

    Discusses the issues to consider when selecting floor-care chemicals, including the floor-finish systems for hard-surface floors and the care of carpeted floors. Provides thoughts on cleaning chemical usage and environmental awareness. (GR)

  12. Floors: Selection and Maintenance.

    ERIC Educational Resources Information Center

    Berkeley, Bernard

    Flooring for institutional, commercial, and industrial use is described with regard to its selection, care, and maintenance. The following flooring and subflooring material categories are discussed--(1) resilient floor coverings, (2) carpeting, (3) masonry floors, (4) wood floors, and (5) "formed-in-place floors". The properties, problems,…

  13. Rubber Flooring Impact on Health of Dairy Cows

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Use of rubber flooring in dairies has become popular because of perceived cow comfort. The objective of this longitudinal study was to evaluate locomotion, health, production, and immunity over the first 180d of each of the 1st and 2nd lactations of cows assigned to free-stall housing with either r...

  14. 1st HPV Test for Use with Preservative Fluid

    MedlinePlus

    ... 159789.html 1st HPV Test for Use With Preservative Fluid Human papillomavirus responsible for 70 percent of ... Roberts Friday, July 8, 2016 FRIDAY, July 8, 2016 (HealthDay News) -- The U.S. Food and Drug Administration has approved Roche's cobas HPV ...

  15. Scalloped Floor

    NASA Technical Reports Server (NTRS)

    2006-01-01

    13 July 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows erosional remnants of layered rock and large windblown ripples on the floor of a crater in the Tyrrhena Terra region of Mars. The layered rocks are most likely sedimentary.

    Location near: 15.5oS, 270.5oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Southern Autumn

  16. Tiled Floor

    NASA Technical Reports Server (NTRS)

    2006-01-01

    30 April 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a variety of materials found on the floor of an impact crater northwest of Hellas Planitia. The discontinuous, dark-toned ridges, typically running diagonally across the scene, are windblown ripples which overlie light-toned rock that is heavily fractured and cratered.

    Location near: 25.0oS, 322.9oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Southern Summer

  17. ["1st Therapeutic Red Cross Hospital" during the civil war].

    PubMed

    Simonenko, V B; Abashin, V G

    2014-04-01

    The article presents the documentary information about the founding, the establishment and early years of the 1st Therapeutic Red Cross Hospital - in the future - Mandryka Central Military Clinical Hospital of the Ministry of Defence of the Russian Federation. Presented the work of the Hospital during the dificult period of the Civil War, typhus epidemic, famine and devastation. Specified its staffing structure, command, medical and administrative staff, travel and accommodation till the moment of the deployment in the Silver Lane in Moscow. PMID:25051792

  18. The 1st All-Russian Workshop on Archaeoastronomy

    NASA Astrophysics Data System (ADS)

    Bochkarev, Nikolai G.

    2007-08-01

    The 1st All-Russia Workshop on Archaeoastronomy “Astronomical and World-Outlook Meaning of the Archaeological Monuments of South Ural” was held on June 19-25, 2006, at the ground of the archaeological center “Arkaim” (Chelyabinsk Region). Besides about 30 talks, astronomical measurements were performed at two archaeological objects under intensive study: Arkaim Site (Bronze Epoch, XVIII-XVI c. B.C.) and tumuli “with whiskers” complex Kondurovsky (V-VIII c. A.D.). The promising character of the megalithic complex on the Vera Island (Lake Turgoyak) was stated.

  19. [The 1st International Youth Ecologist Forum in China, 2009: a review].

    PubMed

    Xiong, You-cai; Xiong, Jun-lan; Li, Pu-fang; Li, Zhi-hua; Kong, Hai-yan; Wang, Shao-ming

    2011-04-01

    To promote the communication and cooperation between Chinese and overseas youth ecologists, a conference entitled "The 1st International Young Ecologist Forum" was held at Lanzhou University in June 29-30, 2009. This conference was organized by outstanding overseas ecologists and hosted by Lanzhou University. The presentations covered broad areas of ecology, including plant-soil interactions, structure and function of regional ecosystems, ecological security and ecological planning, global change ecology, and environmental sustainability, demonstrating that the development of China ecology is gradually from traditional basic research transforming into applied research. The presentations also reflected in some extent the development characteristics, evolution direction, and distribution pattern of China ecological research. China ecological research has gradually formed four centers, the Northeast, North, Northwest, and Southeast China, and each of them has its definite regional characteristics. Some suggestions about the organization form and future planning of the forum were put forward.

  20. RETURN TO DIVISION IA FOOTBALL FOLLOWING A 1ST METATARSOPHALANGEAL JOINT DORSAL DISLOCATION

    PubMed Central

    Cook, Chad; Zarzour, Hap; Moorman, Claude T.

    2010-01-01

    Background. Although rare in occurrence, a dorsal dislocation of the 1st metatarsophalangeal (MTP) joint has been successfully treated using surgical and/or non-operative treatment. No descriptions of conservative intervention following a dorsal dislocation of the MTP joint in an athlete participating in a high contact sport are present in the literature. Objectives. The purpose of this case report is to describe the intervention and clinical reasoning during the rehabilitative process of a collegiate football player diagnosed with a 1st MTP joint dorsal dislocation. The plan of care and return to play criteria used for this athlete are presented. Case Description. The case involved a 19-year-old male Division IA football player, who suffered a traumatic dorsal dislocation of the 1st MTP joint during practice. The dislocation was initially treated on-site by closed reduction. Non-operative management included immobilization, therapeutic exercises, non-steroidal anti-inflammatories, manual treatment, modalities, prophylactic athletic taping, gait training, and a sport specific progression program for full return to Division IA football. Outcomes. Discharge from physical therapy occurred after six weeks of treatment. At discharge, no significant deviations existed during running, burst, and agility related drills. At a six-month follow-up, the patient reported full return to all football activities including contact drills without restrictions. Discussion. This case describes an effective six-week rehabilitation intervention for a collegiate football player who sustained a traumatic great toe dorsal dislocation. Further study is suggested to evaluate the intervention strategies and timeframe for return to contact sports. PMID:21589669

  1. 1st Stage Separation Aerodynamics Of VEGA Launcher

    NASA Astrophysics Data System (ADS)

    Genito, M.; Paglia, F.; Mogavero, A.; Barbagallo, D.

    2011-05-01

    VEGA is an European launch vehicle under development by the Prime Contractor ELV S.p.A. in the frame of an ESA contract. It is constituted by four stages, dedicated to the scientific/commercial market of small satellites (300 ÷ 2500 kg) into Low Earth Orbits, with inclinations ranging from 5.2° up to Sun Synchronous Orbits and with altitude ranging from 300 to 1500 km. Aim of this paper is to present a study of flow field due to retro-rockets impingement during the 1st stage VEGA separation phase. In particular the main goal of the present work is to present the aerodynamic activities performed for the justification of the separation phase.

  2. Cleaning up Floor Care.

    ERIC Educational Resources Information Center

    Carr, Richard; McLean, Doug

    1995-01-01

    Discusses how educational-facility maintenance departments can cut costs in floor cleaning through careful evaluation of floor equipment and products. Tips for choosing carpet detergents are highlighted. (GR)

  3. Mixed-Up Floors.

    ERIC Educational Resources Information Center

    Shaw, Richard

    2001-01-01

    Examines the maintenance management problems inherent in cleaning multiple flooring materials revealing the need for school officials to keep it simple when choosing flooring types. Also highlighted is a carpet recycling program used by Wright State University (Ohio). (GR)

  4. LOFT, TAN650. Service building preamp tower, top three floors. Floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LOFT, TAN-650. Service building pre-amp tower, top three floors. Floor plan, cable mazes, duct labyrinth. Borated water tank enclosure on roof. Kaiser engineers 6413-11-STEP/LOFT-650-A-3. Date: October 1964. INEEL index code no. 036-650-00-486-122215 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  5. FIRST FLOOR FRONT ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR FRONT ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS (THE LATTER FLOOR WAS REMOVED MANY YEARS AGO), See also PA-1436 B-12 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  6. 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop

    SciTech Connect

    none,

    2011-10-01

    The U.S. marine energy industry is actively pursuing development of offshore wind and marine hydrokinetic (MHK) energy systems. Experience in the wind energy sector demonstrates that new technology development requires thorough measurement and characterization of the environmental conditions prevalent at installation sites and of technology operating in the field. Presently, there are no turn-key instrumentation system solutions that meet the measurement needs of the marine energy industry. The 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop brought together technical experts from government laboratories, academia, and industry representatives from marine energy, wind, offshore oil and gas, and instrumentation developers to present and discuss the instrumentation needs of the marine energy industry. The goals of the meeting were to: 1. Share the latest relevant knowledge among technical experts; 2. Review relevant state-of-the-art field measurement technologies and methods; 3. Review lessons learned from recent field deployments; 4. Identify synergies across different industries; 5. Identify gaps between existing and needed instrumentation capabilities; 6. Understand who are the leading experts; 7. Provide a forum where stakeholders from the marine energy industry could provide substantive input in the development of new marine energy field deployable instrumentation packages.

  7. 94. DETAIL, SAME BEAN AS ABOVE, MARKED 'PATENTED DEC. 1ST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    94. DETAIL, SAME BEAN AS ABOVE, MARKED 'PATENTED DEC. 1ST 1857' - Smithsonian Institution Building, 1000 Jefferson Drive, between Ninth & Twelfth Streets, Southwest, Washington, District of Columbia, DC

  8. Social and moral norm differences among Portuguese 1st and 6th year medical students towards their intention to comply with hand hygiene.

    PubMed

    Roberto, Magda S; Mearns, Kathryn; Silva, Silvia A

    2012-01-01

    This study examines social and moral norms towards the intention to comply with hand hygiene among Portuguese medical students from 1st and 6th years (N = 175; 121 from the 1st year, 54 from the 6th year). The study extended the theory of planned behaviour theoretical principles and hypothesised that both subjective and moral norms will be the best predictors of 1st and 6th year medical students' intention to comply with hand hygiene; however, these predictors ability to explain intention variance will change according to medical students' school year. Results indicated that the subjective norm, whose referent focuses on professors, is a relevant predictor of 1st year medical students' intention, while the subjective norm that emphasises the relevance of colleagues predicts the intentions of medical students from the 6th year. In terms of the moral norm, 6th year students' intention is better predicted by a norm that interferes with compliance; whereas intentions from 1st year students are better predicted by a norm that favours compliance. Implications of the findings highlight the importance of role models and mentors as key factors in teaching hand hygiene in medical undergraduate curricula. PMID:22111788

  9. Building Trades. Block III. Floor Framing.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This document contains three units of a course on floor framing to be used as part of a building trades program. Each unit consists, first, of an informational lesson, with complete lesson plan for the teacher's use. Included in each lesson plan are the lesson aim; lists of teaching aids, materials, references, and prerequisites for students;…

  10. Proceedings of the 1st Puerto Rico Biobanking Workshop

    PubMed Central

    Mora, Edna; Robb, James A.; Stefanoff, Gustavo; Mellado, Robert Hunter; Coppola, Domenico; Muñoz-Antonia, Teresita; Flores, Idhaliz

    2015-01-01

    The 1st Puerto Rico Biobanking Workshop took place on August 20th, 2014 in the Auditorium of the Comprehensive Cancer Center of the University of Puerto Rico, Medical Sciences Campus in San Juan Puerto Rico. The program for this 1-day, live workshop included lectures by three biobanking experts, followed by presentations from existing biobanks in Puerto Rico and audience discussion. The need for increasing biobanking expertise in Puerto Rico stems from the fact that Hispanics in general are underrepresented in the biobanks in existence in the US, which limits the research conducted specifically to understand the molecular differences in cancer cells compared to other better studied populations. In turn, this lack of information impairs the development of better diagnostic and therapeutic approaches for our population. Dr. James Robb, M.D., F.C.A.P., consulting pathologist to the National Cancer Institute (NCI) and the Office of Biorepositories and Biospecimen Research (OBBR), opened the workshop with a discussion on the basic aspects of the science of biobanking (e.g., what is a biobank; its goals and objectives; protocols and procedures) in his talk addressing the importance of banking tissues for advancing biomedical research. Next, Dr. Gustavo Stefanoff, from the Cancer Institutes Network of Latin America (RINC by its name in Spanish), explained the mission, objectives, and structure of the Network of Latin-American and Caribbean Biobanks (REBLAC by its name in Spanish), which despite limited resources and many challenges, currently accrue high quality human tissue specimens and data to support cancer research in the region. Dr. Robert Hunter-Mellado, Professor of Internal Medicine, Universidad Central del Caribe, followed with an examination of the ethical and regulatory aspects of biobanking tissues for future research, including informed consent of subjects; protection of human subjects rights; and balancing risks and benefit ratios. In the afternoon, the

  11. Psychiatric Diagnosis and Concomitant Medical Treatment for 1st and 2nd Grade Children

    ERIC Educational Resources Information Center

    Cornell-Swanson, La Vonne; Frankenberger, William; Ley, Katie; Bowman, Krista

    2007-01-01

    This study examined the proportion of children in 1st and 2nd grade classes who were currently prescribed medication for psychotropic disorders. The study also examined the attitudes of 1st and 2nd grade teachers toward diagnosis of psychiatric disorders and use of psychiatric medication to treat children. Results of the current study indicate…

  12. Floors: Care and Maintenance.

    ERIC Educational Resources Information Center

    Post Office Dept., Washington, DC.

    Guidelines, methods and policies regarding the care and maintenance of post office building floors are overviewed in this handbook. Procedures outlined are concerned with maintaining a required level of appearance without wasting manpower. Flooring types and characteristics and the particular cleaning requirements of each type are given along with…

  13. School Flooring Factors

    ERIC Educational Resources Information Center

    McGrath, John

    2012-01-01

    With all of the hype that green building is receiving throughout the school facility-management industry, it's easy to overlook some elements that may not be right in front of a building manager's nose. It is helpful to examine the role floor covering plays in a green building project. Flooring is one of the most significant and important systems…

  14. Maximizing Hard Floor Maintenance.

    ERIC Educational Resources Information Center

    Steger, Michael

    2000-01-01

    Explains the maintenance options available for hardwood flooring that can help ensure long life cycles and provide inviting spaces. Developing a maintenance system, knowing the type of traffic that the floor must endure, using entrance matting, and adhering to manufacturers guidelines are discussed. Daily, monthly or quarterly, and long-term…

  15. Study of Effort to Exclude Planned Parenthood from Participation in Combined Federal Campaign. Report Prepared by the Staff of the Subcommittee on Civil Service of the Committee on Post Office and Civil Service. House of Representatives, 98th Congress, 1st Session. Committee Print No. 98-8.

    ERIC Educational Resources Information Center

    1983

    Presented in this report is an account of the attempt made by the Director of the United States Office of Personnel Managment (OPM) to exclude the Planned Parenthood Federation of America (PPFA) from participation in the Combined Federal Campaign (CFC). The CFC is the annual charitable fundraising drive conducted among federal employees and…

  16. FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS AT LEFT. See also PA-1436 B-6 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  17. FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS AT LEFT. See also PA-1436 B-13 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  18. Pet Care Teaching Unit: 1st-3rd Grades.

    ERIC Educational Resources Information Center

    Peninsula Humane Society, San Mateo, CA.

    Activities in this unit are designed to familiarize primary grade students with the responsibilities involved in pet ownership. Teaching plans are provided for a total of 12 lessons involving social studies, language arts, math, and health sciences. Activities adaptable for readers and non-readers focus on pet overpopulation, care of pets when…

  19. From Seattle to Novosibirsk: A 1st Grade Exchange.

    ERIC Educational Resources Information Center

    McLane, Jane

    1991-01-01

    In Seattle, Washington, an interdisciplinary Soviet-American curriculum exchange (the Kids to Kids project) was created by three dedicated teachers, who planned and implemented the project and finally visited the Siberian town of Novosibirsk. This friendship exchange helped participants appreciate similarities, celebrate differences, and become…

  20. Macroscopic lithotype characterisation of the 1st Middle-Polish (1st Lusatian) Lignite Seam in the Miocene of central Poland

    NASA Astrophysics Data System (ADS)

    Widera, Marek

    2012-03-01

    The 1st Middle-Polish (1st Lusatian) Lignite Seam is exploited in open-cast mines in central Poland. A large number of lignite lithotypes, grouped in four lithotype associations, are distinguished: xylitic, detritic, xylo-detritic and detro-xylitic lithotype associations, which show various structures. Each lithotype association was produced under specific peat-forming environmental conditions. In the case of the lignite seams under study they represent all the main environments that are known from Neogene mires, i.e.: fen or open water, bush moor, wet forest swamp and dry forest swamp. For a simple and practical description in the field of both the lignite sections and borehole cores, a new codification for lignite lithotypes is proposed. It is based on the codification of clastic deposits (lithofacies). The practical value of the new lignite lithotype codification is examined in three vertical sections of the 1st Middle-Polish Lignite Seam.

  1. Total pelvic floor ultrasound for pelvic floor defaecatory dysfunction: a pictorial review.

    PubMed

    Hainsworth, Alison J; Solanki, Deepa; Schizas, Alexis M P; Williams, Andrew B

    2015-01-01

    Total pelvic floor ultrasound is used for the dynamic assessment of pelvic floor dysfunction and allows multicompartmental anatomical and functional assessment. Pelvic floor dysfunction includes defaecatory, urinary and sexual dysfunction, pelvic organ prolapse and pain. It is common, increasingly recognized and associated with increasing age and multiparity. Other options for assessment include defaecation proctography and defaecation MRI. Total pelvic floor ultrasound is a cheap, safe, imaging tool, which may be performed as a first-line investigation in outpatients. It allows dynamic assessment of the entire pelvic floor, essential for treatment planning for females who often have multiple diagnoses where treatment should address all aspects of dysfunction to yield optimal results. Transvaginal scanning using a rotating single crystal probe provides sagittal views of bladder neck support anteriorly. Posterior transvaginal ultrasound may reveal rectocoele, enterocoele or intussusception whilst bearing down. The vaginal probe is also used to acquire a 360° cross-sectional image to allow anatomical visualization of the pelvic floor and provides information regarding levator plate integrity and pelvic organ alignment. Dynamic transperineal ultrasound using a conventional curved array probe provides a global view of the anterior, middle and posterior compartments and may show cystocoele, enterocoele, sigmoidocoele or rectocoele. This pictorial review provides an atlas of normal and pathological images required for global pelvic floor assessment in females presenting with defaecatory dysfunction. Total pelvic floor ultrasound may be used with complementary endoanal ultrasound to assess the sphincter complex, but this is beyond the scope of this review. PMID:26388109

  2. Texas Reports 1st U.S. Case of Zika from Travel to Another State

    MedlinePlus

    ... 160450.html Texas Reports 1st U.S. Case of Zika From Travel to Another State Resident had recently ... what appears to be the first case of Zika infection traveling across state lines, Texas health officials ...

  3. 45. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Turn span from SE. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  4. 46. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Overall view, from S. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  5. BLOEDNER MONUMENT (32ND INDIANA, 1ST GERMAN MONUMENT), SECTION C, FRONT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BLOEDNER MONUMENT (32ND INDIANA, 1ST GERMAN MONUMENT), SECTION C, FRONT ELEVATION DETAIL OF GERMAN TEXT. VIEW TO NORTHEAST. - Cave Hill National Cemetery, 701 Baxter Avenue, Louisville, Jefferson County, KY

  6. U.S. Premature Births Rise for 1st Time in 8 Years

    MedlinePlus

    ... 161792.html U.S. Premature Births Rise for 1st Time in 8 Years March of Dimes' report finds ... United States increased in 2015 for the first time in eight years, and rates are especially high ...

  7. 28. ENGINE CLUSTER OF 1ST STAGE OF A SATURN I ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. ENGINE CLUSTER OF 1ST STAGE OF A SATURN I ROCKET ENGINE LOCATED ON NORTH SIDE OF STATIC TEST STAND. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

  8. VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT CASCADES TOWARDS FILTRATION PLANT AND LOS ANGELES RESERVOIR - Los Angeles Aqueduct, Cascades Structures, Los Angeles, Los Angeles County, CA

  9. 4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND VERTICAL BRACED DOUBLE ANGLES, DIAGONAL BRACING AND CROSS BRACED RAILING - Thirty-Sixth Street Bridge, Spanning Rabbit River, Hamilton, Allegan County, MI

  10. Florida Reports 1st Locally Transmitted Zika Infections in U.S.

    MedlinePlus

    ... fullstory_160151.html Florida Reports 1st Locally Transmitted Zika Infections in U.S. 4 cases likely originated from ... apparently experiencing its first local outbreak of the Zika virus, with four human infections reported in South ...

  11. MAGAZINE E30. VIEW FROM BETWEEN 1ST AND 2ND BLAST WALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MAGAZINE E-30. VIEW FROM BETWEEN 1ST AND 2ND BLAST WALL LOOKING TO THE REAR OF THE MAGAZINE. - Naval Magazine Lualualei, Waikele Branch, Tunnel Magazine Type, Waikakalaua & Kipapa Gulches, Pearl City, Honolulu County, HI

  12. 19. Detail of brick courses 116, back side, between 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Detail of brick courses 1-16, back side, between 1st and 2nd windows from the right - Oklahoma State University, Boys Dormitory, Northwest corner of Hester Street & Athletic Avenue, Stillwater, Payne County, OK

  13. 20. Detail of brick courses 4675, back side, between 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. Detail of brick courses 46-75, back side, between 1st and 2nd windows from the right - Oklahoma State University, Boys Dormitory, Northwest corner of Hester Street & Athletic Avenue, Stillwater, Payne County, OK

  14. If 1st Baby's Early, 2nd Will Be Too: Study

    MedlinePlus

    ... If 1st Baby's Early, 2nd Will Be Too: Study Chances just as high for women who go ... it really is a potent factor," said senior study author Laura Jelliffe-Pawlowski. She is associate director ...

  15. 1st- and 2nd-order motion and texture resolution in central and peripheral vision

    NASA Technical Reports Server (NTRS)

    Solomon, J. A.; Sperling, G.

    1995-01-01

    STIMULI. The 1st-order stimuli are moving sine gratings. The 2nd-order stimuli are fields of static visual texture, whose contrasts are modulated by moving sine gratings. Neither the spatial slant (orientation) nor the direction of motion of these 2nd-order (microbalanced) stimuli can be detected by a Fourier analysis; they are invisible to Reichardt and motion-energy detectors. METHOD. For these dynamic stimuli, when presented both centrally and in an annular window extending from 8 to 10 deg in eccentricity, we measured the highest spatial frequency for which discrimination between +/- 45 deg texture slants and discrimination between opposite directions of motion were each possible. RESULTS. For sufficiently low spatial frequencies, slant and direction can be discriminated in both central and peripheral vision, for both 1st- and for 2nd-order stimuli. For both 1st- and 2nd-order stimuli, at both retinal locations, slant discrimination is possible at higher spatial frequencies than direction discrimination. For both 1st- and 2nd-order stimuli, motion resolution decreases 2-3 times more rapidly with eccentricity than does texture resolution. CONCLUSIONS. (1) 1st- and 2nd-order motion scale similarly with eccentricity. (2) 1st- and 2nd-order texture scale similarly with eccentricity. (3) The central/peripheral resolution fall-off is 2-3 times greater for motion than for texture.

  16. 3. FIRST FLOOR, FRONT ROOM (WHERE MARTIN LUTHER KING MADE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. FIRST FLOOR, FRONT ROOM (WHERE MARTIN LUTHER KING MADE PLANS FOR HIS MOVEMENT) - Penn School Historic District, Arnett House, SC Route 37, 1 mile South of Frogmore, St. Helena Island, Frogmore, Beaufort County, SC

  17. Cooling Floor AC Systems

    NASA Astrophysics Data System (ADS)

    Jun, Lu; Hao, Ding; Hong, Zhang; Ce, Gao Dian

    The present HVAC equipments for the residential buildings in the Hot-summer-and-Cold-winter climate region are still at a high energy consuming level. So that the high efficiency HVAC system is an urgently need for achieving the preset government energy saving goal. With its advantage of highly sanitary, highly comfortable and uniform of temperature field, the hot-water resource floor radiation heating system has been widely accepted. This paper has put forward a new way in air-conditioning, which combines the fresh-air supply unit and such floor radiation system for the dehumidification and cooling in summer or heating in winter. By analyze its advantages and limitations, we found that this so called Cooling/ Heating Floor AC System can improve the IAQ of residential building while keep high efficiency quality. We also recommend a methodology for the HVAC system designing, which will ensure the reduction of energy cost of users.

  18. Highly efficient -1st-order reflection in Littrow mounted dielectric double-groove grating

    NASA Astrophysics Data System (ADS)

    Ito, Kota; Iizuka, Hideo

    2013-06-01

    We show that in a silicon double-groove grating with two different groove widths per period attached on top of a semi-infinite SiO2 substrate, almost 100% reflectivity is achieved for the -1st-order reflection with an incident angle of 60° in the Littrow mounting condition. The modal analysis reveals that modes propagating in the upward and downward directions have nearly the same amplitudes at resonance. They are added constructively for the -1st-order reflection and destructively for the 0th-order reflection and the -1st-order and 0th-order transmission. The asymmetric structure with a dielectric material poses a unique feature as a four port device.

  19. 5. Interior, second floor. Pressed metal ceiling, and wooden floors ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Interior, second floor. Pressed metal ceiling, and wooden floors visible. Overhead light source toward rear of building indicates location of skylight. - 25-27 East Hanover Street (Commercial Building), 25-27 East Hanover Street, Trenton, Mercer County, NJ

  20. 16. STATIC TEST TOWER REMOVABLE FLOOR LEVEL VIEW OF FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. STATIC TEST TOWER REMOVABLE FLOOR LEVEL VIEW OF FLOOR THAT FOLDS BACK TO ALLOW ROCKET PLACEMENT. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

  1. Report of the 1st Planning Workshop for CELSS Flight Experimentation

    NASA Technical Reports Server (NTRS)

    Tremor, John W.; Macelroy, Robert D.

    1988-01-01

    A workshop held March 23 and 24, 1987 to establish a base upon which a CELSS flight experiment program will be developed, is summarized. The kind of information necessary for productivity assessment was determined. In addition, generic experiments necessary to gather that information were identified and prioritized. General problems of hardware and equipment were defined. The need for the hardware to provide a stress-free environment, not only for productivity, but also to make more readily identifiable disturbing mission factors, was recognized.

  2. Minimally Invasive Arthrodesis of 1st Metatarsophalangeal Joint for Hallux Rigidus.

    PubMed

    Sott, A H

    2016-09-01

    First metatarsophalangeal joint arthrodesis plays a significant role in the management of symptomatic hallux rigidus/osteoarthritis of the 1st metatarsophalangeal joint. Several open and few percutaneous techniques have been described in the literature. This article describes and discusses a percutaneous technique that has been successfully used to achieve a pain-free stable and functional 1st metatarsophalangeal joint. All aspects of surgical indication and operative technique and details of patient-reported outcomes are presented with a referenced discussion. PMID:27524706

  3. CAST FLOOR WITH VIEW OF TORPEDO LADLE (BENEATH CAST FLOOR) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAST FLOOR WITH VIEW OF TORPEDO LADLE (BENEATH CAST FLOOR) AND KEEPERS OF THE CAST HOUSE FLOOR, S.L. KIMBROUGH AND DAVID HOLMES. - U.S. Steel, Fairfield Works, Blast Furnace No. 8, North of Valley Road, West of Ensley-Pleasant Grove Road, Fairfield, Jefferson County, AL

  4. 130. Post1911. Photograph labeled, 'SEASON 1913. CAPTAIN, 1st MATE, SUPT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    130. Post-1911. Photograph labeled, 'SEASON 1913. CAPTAIN, 1st MATE, SUPT AND STOREKEEPER, A.P. ASS'N CANNERY, SHIP STAR OF ALASKA.' View forward from mizzenmast, post side. - Ship BALCLUTHA, 2905 Hyde Street Pier, San Francisco, San Francisco County, CA

  5. 47. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    47. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Latching mechanism, E end of turn span, viewed from W. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  6. 42. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Copy of postcard ca. 1900. Copy owned and made by Jack Donnell, Columbus, Ms. Shows two-span steel truss, built by Phoenix Bridge Co. in 1878. Negative copied by: Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  7. 48. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms Latching mechanism, E end of turn span, view from N. Sarcone Photography, Columbus, MS. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  8. 49. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    49. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Top of pier and underside of w end of turn span. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  9. The Student View of 1st Year Laboratory Work in the Biosciences--Score Gamma?

    ERIC Educational Resources Information Center

    Collis, Mike; Gibson, Alan; Hughes, Ian; Sayers, Gill; Todd, Martin

    2008-01-01

    Students registered on 1st year bioscience courses in 9 universities were surveyed for their views on the laboratory classes they were taking. Returns were obtained from 695 (70%). Student views were varied, some viewing particular features of laboratory classes as "good" while others viewed the same features as "bad". Students identified as the…

  10. How Many Attempts Until Success in Some Core 1st. Year Disciplines?

    ERIC Educational Resources Information Center

    Fernandes, Graça Leão; Andrade e Silva, João; Lopes, Margarida Chagas

    2012-01-01

    Due to a general development in education brought about by democracy, Portugal has witnessed tremendous development in Higher Education (HE) since the beginning of the 1980s. Nevertheless, the percentage of graduates among the Portuguese population still ranks far below most European countries. This is why academic performance in HE 1st cycle…

  11. First-Generation College Students' 1st-Year College Experiences: Challenges Attending a Private University

    ERIC Educational Resources Information Center

    Reid, Josephine

    2013-01-01

    First-generation college students (FGCS) face challenges when switching from high school to college and during their 1st-year in college. Additionally, FGCS may have difficulty understanding the steps required to prepare for and enroll in postsecondary education. The social capital theory examines support of social, academic, and cultural networks…

  12. 77 FR 22574 - Filing Dates for the Washington Special Election In the 1st Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-16

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the Washington Special Election In the 1st Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special election. SUMMARY: Washington has...

  13. The Course of Psychological Disorders in the 1st Year After Cancer Diagnosis

    ERIC Educational Resources Information Center

    Kangas, Maria; Henry, Jane L.; Bryant, Richard A.

    2005-01-01

    This study investigated the relationship between acute stress disorder (ASD) and posttraumatic stress disorder (PTSD) and comorbid anxiety, depressive, and substance use disorders over the first 12-month period following a cancer diagnosis. Individuals recently diagnosed with 1st onset head and neck or lung malignancy were assessed for ASD within…

  14. Perceptual Narrowing of Linguistic Sign Occurs in the 1st Year of Life

    ERIC Educational Resources Information Center

    Palmer, Stephanie Baker; Fais, Laurel; Golinkoff, Roberta Michnick; Werker, Janet F.

    2012-01-01

    Over their 1st year of life, infants' "universal" perception of the sounds of language narrows to encompass only those contrasts made in their native language (J. F. Werker & R. C. Tees, 1984). This research tested 40 infants in an eyetracking paradigm and showed that this pattern also holds for infants exposed to seen language--American Sign…

  15. Requirement of copper for 1st-log growth of the yeast Saccharomyces cerevisiae

    SciTech Connect

    Como, S.A.; Valerio, V.; Nickless, S.; Connelly, J.L.

    1986-05-01

    Routine evaluation of the role of copper (Cu) in the growth of various mutants of the yeast Saccharomyces Cerevisiae disclosed an unexpected effect of Cu on the fermentative first-log growth. The authors subsequent studies are attempting to ascertain the nature and significance of this observation. Cells are grown on glucose in a supplemented minimal media at 29/sup 0/C for 48-72 hrs. using New Brunswick incubator shaking at 200 rpm. Cu concentration was varied by addition of Cu salts or bathocuproine disulfonate (BC), a highly specific Cu chelator. Samples were removed periodically from flasks and dry weights were determined. Growth curve plots of normal yeasts grown in the presence of 1mM to 38mM Cu showed little variation in the expected 1st log; diauxi; 2nd log; stationary phase picture. However, in the presence of BC growth rate in the 1st log was significantly slowed and as expected 2nd log growth was essentially stopped. The low 1st log growth rate could be titrated to normal (+Cu) levels by increments of added Cu but not by added iron. The effect was not seen when Rho-minus strains were used nor when growth was followed under anaerobic conditions. Results to date implicate a mitochondrial protein, oxygen and copper in the 1st log growth of S Cerevisiae. The character of the protein agent and the possible contribution of cytochrome oxidase activity to the lst log growth are being evaluated.

  16. Chronic pelvic floor dysfunction.

    PubMed

    Hartmann, Dee; Sarton, Julie

    2014-10-01

    The successful treatment of women with vestibulodynia and its associated chronic pelvic floor dysfunctions requires interventions that address a broad field of possible pain contributors. Pelvic floor muscle hypertonicity was implicated in the mid-1990s as a trigger of major chronic vulvar pain. Painful bladder syndrome, irritable bowel syndrome, fibromyalgia, and temporomandibular jaw disorder are known common comorbidities that can cause a host of associated muscular, visceral, bony, and fascial dysfunctions. It appears that normalizing all of those disorders plays a pivotal role in reducing complaints of chronic vulvar pain and sexual dysfunction. Though the studies have yet to prove a specific protocol, physical therapists trained in pelvic dysfunction are reporting success with restoring tissue normalcy and reducing vulvar and sexual pain. A review of pelvic anatomy and common findings are presented along with suggested physical therapy management.

  17. Polygons on Crater Floor

    NASA Technical Reports Server (NTRS)

    2003-01-01

    MGS MOC Release No. MOC2-357, 11 May 2003

    This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) picture shows a pattern of polygons on the floor of a northern plains impact crater. These landforms are common on crater floors at high latitudes on Mars. Similar polygons occur in the arctic and antarctic regions of Earth, where they indicate the presence and freeze-thaw cycling of ground ice. Whether the polygons on Mars also indicate water ice in the ground is uncertain. The image is located in a crater at 64.8oN, 292.7oW. Sunlight illuminates the scene from the lower left.

  18. Floor of Hellas Basin

    NASA Technical Reports Server (NTRS)

    2002-01-01

    [figure removed for brevity, see original site]

    With a diameter of roughly 2000 km and a depth of over 7 km, the Hellas Basin is the largest impact feature on Mars. Because of its great depth, there is significantly more atmosphere to peer through in order to see its floor, reducing the quality of the images taken from orbit. This THEMIS image straddles a scarp between the Hellas floor and an accumulation of material at least a half kilometer thick that covers much of the floor. The southern half of the image contains some of this material. Strange ovoid landforms are present here that give the appearance of flow. It is possible that water ice or even liquid water was present in the deposits and somehow responsible for the observed landscape. The floor of Hellas remains a poorly understood portion of the planet that should benefit from the analysis of new THEMIS data.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in

  19. [Kweichow planned parenthood conference].

    PubMed

    1978-12-15

    On December 5th the Kweichow Provincial Planned Parenthood Leadership Group held its 1st conference to discuss the problems of planned parenthood in the province. Miao Chun-ting, deputy secretary of the provincial CCP committee and head of the provincial planned parenthood leadership group, presided over the conference.

  20. Modular Flooring System

    NASA Technical Reports Server (NTRS)

    Thate, Robert

    2012-01-01

    The modular flooring system (MFS) was developed to provide a portable, modular, durable carpeting solution for NASA fs Robotics Alliance Project fs (RAP) outreach efforts. It was also designed to improve and replace a modular flooring system that was too heavy for safe use and transportation. The MFS was developed for use as the flooring for various robotics competitions that RAP utilizes to meet its mission goals. One of these competitions, the FIRST Robotics Competition (FRC), currently uses two massive rolls of broadloom carpet for the foundation of the arena in which the robots are contained during the competition. The area of the arena is approximately 30 by 72 ft (approximately 9 by 22 m). This carpet is very cumbersome and requires large-capacity vehicles, and handling equipment and personnel to transport and deploy. The broadloom carpet sustains severe abuse from the robots during a regular three-day competition, and as a result, the carpet is not used again for competition. Similarly, broadloom carpets used for trade shows at convention centers around the world are typically discarded after only one use. This innovation provides a green solution to this wasteful practice. Each of the flooring modules in the previous system weighed 44 lb (.20 kg). The improvements in the overall design of the system reduce the weight of each module by approximately 22 lb (.10 kg) (50 %), and utilize an improved "module-to-module" connection method that is superior to the previous system. The MFS comprises 4-by-4-ft (.1.2-by- 1.2-m) carpet module assemblies that utilize commercially available carpet tiles that are bonded to a lightweight substrate. The substrate surface opposite from the carpeted surface has a module-to-module connecting interface that allows for the modules to be connected, one to the other, as the modules are constructed. This connection is hidden underneath the modules, creating a smooth, co-planar flooring surface. The modules are stacked and strapped

  1. Floor of Baldet Crater

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 13 June 2002) The Science This THEMIS visible image shows a remarkable array of dunes on the floor of a large impact crater named Baldet located near 22.8o N. Many of the dunes in this region are isolated features, with large, sand-free 'interdune' surfaces between the individual dunes. These isolated dunes typically occur in regions where there is a limited supply of sand. Any sand that is present moves rapidly across the interdune surfaces, which in many cases are hardened surfaces over which the sand can easily bounce, or 'saltate.' When this loose sand lands on a dune it cannot travel as quickly and is trapped within the dune. In some areas within this sand mass the dunes have grown together to form crescent dunes and dune ridges. The dunes in this image are likely active today, slowly migrating across the crater floor. THEMIS will re-image this and other dunes throughout the Mars Odyssey mission to search for any evidence of dune motion over time. Based on the asymmetrical shape of the dunes, the wind direction over much of the dune field appears to be from the right (west) or upper right (northwest). However, the topography of the crater floor apparently produces complex wind patterns within the dune field, as can be seen by the different orientations of the dunes. For example the dunes in the lower portion of the image appear to be somewhat symmetrical and aligned east-west, suggesting that the wind in this region blows from both the north (top) and south (bottom). The Story A fuzzy 'carpet' of sand dunes covers the floor of a large impact crater, which you can see almost in full in the context image to the right. While the dunes give this area a plush, tufted look, there actually isn't a lot of sand in this area. How can you tell? Large, sand-free spaces exist in between the dunes, and those usually occur when sand particles are sparse. You can see these 'interdune spaces' better if you click on the image for the more detailed view. The sand that

  2. Crater Wall and Floor

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    3D Projection onto MOLA data [figure removed for brevity, see original site]

    The impact crater observed in this THEMIS image taken in Terra Cimmeria suggests sediments have filled the crater due to the flat and smooth nature of the floor compared to rougher surfaces at higher elevations. The abundance of several smaller impact craters on the floor of the larger crater indicate however that the flat surface has been exposed for an extended period of time. The smooth surface of the crater floor and rougher surfaces at higher elevations are observed in the 3-D THEMIS image that is draped over MOLA topography (2X vertical exaggeration).

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

    Image information: VIS instrument. Latitude -22.9, Longitude 155.7 East (204.3 West). 19 meter/pixel resolution.

  3. Reull Vallis Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows the odd patterns of erosion on the floor of Reull Vallis, a major valley system east of the Hellas Basin in the martian southern hemisphere. Somewhat circular features in this image may have once been meteor craters that were eroded and deformed by erosive processes. This image is located near 42.1oS, 254.5oW. The picture covers an area about 3 km (1.9 mi) wide. Sunlight illuminates the scene from the upper left.

  4. Mesas on Depression Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    3 August 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows mesas and buttes on the floor of a depression in the Labyrinthus Noctis region of Mars. This is part of the western Valles Marineris. Each mesa is a remnant of a formerly more extensive sequence of rock. The image is located near 7.0oS, 99.2oW. It covers an area about 3 km (1.9 mi) across; sunlight illuminates the scene from the lower left.

  5. Rippled Valley Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    15 September 2005 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a ripple-covered valley floor in the Hyblaeus Fossae region. Winds blowing up and down the length of the valley have helped to concentrate windblown grains to form these large, megaripples.

    Location near: 26.3oN, 225.1oW Image width: width: 3 km (1.9 mi) Illumination from: lower left Season: Northern Autumn

  6. Crater Floor Yardangs

    NASA Technical Reports Server (NTRS)

    2004-01-01

    1 December 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a group of semi-parallel ridges--yardangs--etched by wind into layered sedimentary rock on the floor of an unnamed crater in Terra Cimmeria. Many craters on Mars have been the sites of sedimentation. Over time, these sediments have become lithified. This picture is located near 31.3oS, 214.6oW. The image covers an area approximately 3 km (1.9 mi) across. Sunlight illuminates the scene from the left/upper left.

  7. Concentric Crater Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    8 July 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows the interior of a typical crater in northern Acidalia Planitia. The floor is covered by material that forms an almost concentric pattern. In this case, the semi-concentric rings might be an expression of eroded layered material, although this interpretation is uncertain. The crater is located near 44.0oN, 27.7oW, and covers an area about 3 km (1.9 mi) wide. Sunlight illuminates the scene from the lower left.

  8. [Pelvic floor muscle training and pelvic floor disorders in women].

    PubMed

    Thubert, T; Bakker, E; Fritel, X

    2015-05-01

    Our goal is to provide an update on the results of pelvic floor rehabilitation in the treatment of urinary incontinence and genital prolapse symptoms. Pelvic floor muscle training allows a reduction of urinary incontinence symptoms. Pelvic floor muscle contractions supervised by a healthcare professional allow cure in half cases of stress urinary incontinence. Viewing this contraction through biofeedback improves outcomes, but this effect could also be due by a more intensive and prolonged program with the physiotherapist. The place of electrostimulation remains unclear. The results obtained with vaginal cones are similar to pelvic floor muscle training with or without biofeedback or electrostimulation. It is not known whether pelvic floor muscle training has an effect after one year. In case of stress urinary incontinence, supervised pelvic floor muscle training avoids surgery in half of the cases at 1-year follow-up. Pelvic floor muscle training is the first-line treatment of post-partum urinary incontinence. Its preventive effect is uncertain. Pelvic floor muscle training may reduce the symptoms associated with genital prolapse. In conclusion, pelvic floor rehabilitation supervised by a physiotherapist is an effective short-term treatment to reduce the symptoms of urinary incontinence or pelvic organ prolapse.

  9. 9. LOOKING FROM FLOOR 1 UP THROUGH OPENING TO FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. LOOKING FROM FLOOR 1 UP THROUGH OPENING TO FLOOR 2; OPENING IN THE FLOOR IS TO ALLOW THE RUNNER STONES TO BE FLIPPED OVER FOR SHARPENING; AT THE FIRST FLOOR ARE THE POSTS SUPPORTING THE BRIDGEBEAMS ON WHICH THE BRIDGE TREES PIVOT; THE CENTER POST RISES ABOVE THE STONES TO RECEIVE THE FOOT BEARING OF THE UPRIGHT SHAFT; ALSO SEEN ARE THE STONE SPINDLWS, UNDER SIDES OF THE BED STONES, STONE NUT AND GREAT SPUR WHEEL. - Pantigo Windmill, James Lane, East Hampton, Suffolk County, NY

  10. Idaho National Laboratory Quarterly Performance Analysis - 1st Quarter FY2015

    SciTech Connect

    Mitchell, Lisbeth A.

    2015-03-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 73 reportable events (27 from the 1St Qtr FY-15 and 46 from the prior three reporting quarters), as well as 38 other issue reports (including nine not reportable events and Significant Category A and B conditions reported during the1st Qtr FY-15) identified at INL during the past 12 months.

  11. Effect of 1st-trimester loss on restoration of the hypothalamic-pituitary-ovarian axis.

    PubMed

    Elkas, J C; Cunningham, D S

    1995-01-01

    This randomized prospective study was conducted to determine the length of time required for re-establishment of the reproductive axis following a 1st-trimester spontaneous abortion. The spontaneous gonadotropin secretion was significantly depressed during the first menstrual cycle after pregnancy loss, while the estradiol levels had normalized. Provocative testing revealed blunted gonadotropin release in the first menstrual cycle with return to normal during the first menstrual cycle after a spontaneous abortion. Endometrial biopsy specimens were also abnormal during the first menstrual cycle with normal histological characteristics by the second menstrual cycle. Therefore, restoration of the hypothalamic-pituitary- ovarian axis after a 1st-trimester loss is achieved within two menstrual cycles, as determined by return of normal pituitary function.

  12. 44. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Detail from Camille Drie's map: A Bird's Eye View of Columbus, Mississippi ca. 1875-76. Shows M&O RR bridge before the Phoenix Bridge Co. erected iron truss spans in 1878. Credit: Photostat of map in Lowndes Co. Public Library Sarcone Photography, Columbus, Ms. 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  13. 43. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    43. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Copy of photo 1900. Shows 1878 M&O RR bridge. The steamboat, 'Gopher,' in foreground, was an archeological survey vessel from the Franklin Institute in Philadelphia. Published in Art in Mississippi (1901). Credit: Copied from print in Lowndes Co. Public Library by Sarcone Photography, Columbus, Ms. 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  14. Ruthenium indenylidene "1(st) generation" olefin metathesis catalysts containing triisopropyl phosphite.

    PubMed

    Guidone, Stefano; Nahra, Fady; Slawin, Alexandra M Z; Cazin, Catherine S J

    2015-01-01

    The reaction of triisopropyl phosphite with phosphine-based indenylidene pre-catalysts affords "1(st) generation" cis-complexes. These have been used in olefin metathesis reactions. The cis-Ru species exhibit noticeable differences with the trans-Ru parent complexes in terms of structure, thermal stability and reactivity. Experimental data underline the importance of synergistic effects between phosphites and L-type ligands.

  15. Ruthenium indenylidene “1st generation” olefin metathesis catalysts containing triisopropyl phosphite

    PubMed Central

    Guidone, Stefano; Nahra, Fady; Slawin, Alexandra M Z

    2015-01-01

    Summary The reaction of triisopropyl phosphite with phosphine-based indenylidene pre-catalysts affords “1st generation” cis-complexes. These have been used in olefin metathesis reactions. The cis-Ru species exhibit noticeable differences with the trans-Ru parent complexes in terms of structure, thermal stability and reactivity. Experimental data underline the importance of synergistic effects between phosphites and L-type ligands. PMID:26425210

  16. Ruthenium indenylidene "1(st) generation" olefin metathesis catalysts containing triisopropyl phosphite.

    PubMed

    Guidone, Stefano; Nahra, Fady; Slawin, Alexandra M Z; Cazin, Catherine S J

    2015-01-01

    The reaction of triisopropyl phosphite with phosphine-based indenylidene pre-catalysts affords "1(st) generation" cis-complexes. These have been used in olefin metathesis reactions. The cis-Ru species exhibit noticeable differences with the trans-Ru parent complexes in terms of structure, thermal stability and reactivity. Experimental data underline the importance of synergistic effects between phosphites and L-type ligands. PMID:26425210

  17. Canyon Floor Deposits

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Context image for PIA03598 Canyon Floor Deposits

    The layered and wind eroded deposits seen in this VIS image occur on the floor of Chandor Chasma.

    Image information: VIS instrument. Latitude 5.2S, Longitude 283.4E. 17 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  18. Floor of Juventae Chasma

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 30 May 2002) Juventae Chasma is an enormous box canyon (250 km X 100 km) which opens to the north and forms the outflow channel Maja Vallis. Most Martian outflow channels such as Maja, Kasei, and Ares Valles begin at point sources such as box canyons and chaotic terrain and then flow unconfined into a basin region. This image captures a portion of the western floor of Juventae Chasma and shows a wide variety of landforms. Conical hills, mesas, buttes and plateaus of layered material dominate this scene and seem to be 'swimming' in vast sand sheets. The conical hills have a spur and gully topography associated with them while the flat topped buttes and mesas do not. This may be indicative of different materials that compose each of these landforms or it could be that the flat-topped layer has been completely eroded off of the conical hills thereby exposing a different rock type. Both the conical hills and flat-topped buttes and mesas have extensive scree slopes (heaps of eroded rock and debris). Ripples, which are inferred to be dunes, can also be seen amongst the hills. No impact craters can be seen in this image, indicating that the erosion and transport of material down the canyon wall and across the floor is occurring at a relatively rapid rate, so that any craters that form are rapidly buried or eroded.

  19. Fretted Terrain Valley Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    30 December 2003 This December 2003 Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows lineated textures on the floor of a valley in the Deuteronilus region of Mars. Deuteronilus, and neighboring Protonilus and Nilosyrtis, have been known since the Mariner 9 mission as regions of 'fretted terrain.' In this context, 'fretted' does not mean 'worried,' it means 'eroded.' The fretted terrains of Mars are regions along the boundary between cratered highlands and northern lowland plains that have been broken-down into mesas, buttes, and valleys. On the floors of some of these valleys occurs a distinctive lineated and pitted texture--like the example shown here. The cause of the textures is not known, although for decades some scientists have speculated that ice is involved. While this is possible, it is far from a demonstrated fact. This picture is located near 40.1oN, 335.1oW, and covers an area approximately 3 km (1.9 mi) wide; sunlight illuminates the scene from the lower left.

  20. Candor Chasma Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Context image for PIA03080 Candor Chasma Floor

    This VIS image shows part of the layered and wind sculpted deposit that occurs on the floor of Candor Chasma.

    Image information: VIS instrument. Latitude 6.6S, Longitude 284.4E. 17 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  1. Spallanzani Cr. Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Context image for PIA03632 Spallanzani Cr. Floor

    This image was taken by one of the Mars Student Imaging Project (MSIP) teams. Their target is the unusual floor deposits in Spallanzani Crater. The wind may have affected the surface of the layered deposit. Small dunes have formed near the southern margin.

    Image information: VIS instrument. Latitude 57.9S, Longitude 86.5E. 17 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  2. Pelvic floor muscle training exercises

    MedlinePlus

    Kegel exercises ... Pelvic floor muscle training exercises are recommended for: Women with urinary stress incontinence Men with urinary stress incontinence after prostate surgery People who have fecal ...

  3. Do Open Floor Plans Invite Overeating?

    MedlinePlus

    ... college, school and workplace cafeterias; and buffet-style restaurants. "[Our] study results may also have important implications ... front of us, whether it's in a kitchen, restaurant, cafeteria or even on TV, it makes us ...

  4. 18. MAIN FLOOR HOLDING TANKS Main floor, looking at ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. MAIN FLOOR - HOLDING TANKS Main floor, looking at holding tanks against the west wall, from which sluice gates are seen protruding. Right foreground-wooden holding tanks. Note narrow wooden flumes through which fish were sluiced into holding and brining tanks. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  5. 18. FOURTH FLOOR BLDG. 28, RAISED CONCRETE SLAB FLOOR WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. FOURTH FLOOR BLDG. 28, RAISED CONCRETE SLAB FLOOR WITH BLOCKS AND PULLEYS OVERHEAD LOOKING NORTHEAST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  6. 13. Bottom floor, tower interior showing concrete floor and cast ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Bottom floor, tower interior showing concrete floor and cast iron bases for oil butts (oil butts removed when lighthouse lamp was converted to electric power.) - Block Island Southeast Light, Spring Street & Mohegan Trail at Mohegan Bluffs, New Shoreham, Washington County, RI

  7. Sea floor magnetic observatory

    NASA Astrophysics Data System (ADS)

    Korepanov, V.; Prystai, A.; Vallianatos, F.; Makris, J.

    2003-04-01

    The electromagnetic precursors of seismic hazards are widely accepted as strong evidence of the approaching earthquake or volcano eruption. The monitoring of these precursors are of main interest in densely populated areas, what creates serious problems to extract them at the strong industrial noise background. An interesting possibility to improve signal-to-noise ratio gives the installation of the observation points in the shelf zones near the possible earthquake places, what is fairly possible in most seismically active areas in Europe, e. g. in Greece and Italy. The serious restriction for this is the cost of the underwater instrumentation. To realize such experiments it requires the unification of efforts of several countries (e. g., GEOSTAR) or of the funds of some great companies (e. g., SIO magnetotelluric instrument). The progress in electronic components development as well as the appearance of inexpensive watertight glass spheres made it possible to decrease drastically the price of recently developed sea floor magnetic stations. The autonomous vector magnetometer LEMI-301 for sea bed application is described in the report. It is produced on the base of three-component flux-gate sensor. Non-magnetic housing and minimal magnetism of electronic components enable the instrument to be implemented as a monoblock construction where the electronic unit is placed close to the sensor. Automatic circuit provides convenient compensation of the initial field offset and readings of full value (6 digits) of the measured field. Timing by internal clock provides high accuracy synchronization of data. The internal flash memory assures long-term autonomous data storage. The system also has two-axes tilt measurement system. The methodological questions of magnetometer operation at sea bed were studied in order to avoid two types of errors appearing at such experimental cases. First is sea waving influence and second one magnetometer orientation at its random positioning on

  8. Stripped Crater Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    10 February 2004 This full-resolution Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows details on the floor of an ancient meteor crater in the northeastern part of Noachis Terra. After the crater formed, layers of material--perhaps sediment--were deposited in the crater. These materials became somewhat solidified, but later were eroded to form the patterns shown here. Many windblown ripples in the scene indicate the presence of coarse-grained sediment that was not completely stripped away by wind. The picture is located near 22.1oS, 307.0oW. Sunlight illuminates this scene from the left/upper left; the image covers an area 3 km (1.9 mi) wide.

  9. Flow Along Valley Floors

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    Released 9 May 2003

    Lines indicative of flow in a valley floor (east to west) cut across similar lines in a slightly smaller valley (southeast to northwest), indicating both that material flowed along the valley floor (as opposed to across it) and that relative flow ages may be determined from crosscutting relationships.

    Image information: VIS instrument. Latitude 39.6, Longitude 31.1East (328.9). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  10. What's New in Floor Care.

    ERIC Educational Resources Information Center

    Griffin, William R.

    1999-01-01

    Examines some of the new equipment, chemicals, and procedures in floor care to help educational facility managers develop floor care programs and improve performance. Trends include more mechanization, higher concentrations and environmentally preferable products for cleaning, and the use of written cleaning procedures. (GR)

  11. The Ocean Floor

    NASA Astrophysics Data System (ADS)

    Fox, Paul J.

    Over a relatively short period of time Bruce Heezen made significant, imaginative and timely contributions to our understanding of the processes that govern the origin and evolution of oceanic crust in space and time. It is certainly fitting that someone of Heezen's stature be honored by a memorial volume and the collection of papers in The Ocean Floor were gathered together for this purpose. Bruce was a gifted scientist with a wide-ranging appetite for all facets of earth science, and in this respect he would have appreciated the pot pourri of marine geological topics covered in the book (e.g., continental margin investigations, sedimentological processes, plate tectonic models). Unfortunately, the book does not have an overall impact that measures up to the man that it commemorates. Too many of the papers read as if the authors, after having agreed to contribute to the volume, reached deep into their files to dredge up a neglected manuscript on one subject or another. As a consequence, many of the papers lack zest and fail to stimulate interest beyond their narrowly focused themes.

  12. Waterproof Raised Floor Makes Utility Lines Accessible

    NASA Technical Reports Server (NTRS)

    Cohen, M. M.

    1984-01-01

    Floor for laboratories, hospitals and factories waterproof yet allows access to subfloor utilities. Elevated access floor system designed for installations with multitude of diverse utility systems routed under and up through floor and requirement of separation of potentially conflicting utility services. Floor covered by continuous sheet of heat resealable vinyl. Floor system cut open when changes are made in utility lines and ducts. After modifications, floor covering resealed to protect subfloor utilities from spills and leaks.

  13. Low floor mass transit vehicle

    DOEpatents

    Emmons, J. Bruce; Blessing, Leonard J.

    2004-02-03

    A mass transit vehicle includes a frame structure that provides an efficient and economical approach to providing a low floor bus. The inventive frame includes a stiff roof panel and a stiff floor panel. A plurality of generally vertical pillars extend between the roof and floor panels. A unique bracket arrangement is disclosed for connecting the pillars to the panels. Side panels are secured to the pillars and carry the shear stresses on the frame. A unique seating assembly that can be advantageously incorporated into the vehicle taking advantage of the load distributing features of the inventive frame is also disclosed.

  14. Autopsy as a tool for learning gross anatomy during 1st year MBBS

    PubMed Central

    Goyal, Parmod Kumar; Gupta, Monika; Kaur, Jaswinder

    2016-01-01

    Introduction: Embalmed cadavers are the primary tool for teaching anatomy. However, difficulties are encountered due to changed color/texture of organs, hardening of tissues, and smell of formaldehyde. To overcome these difficulties, dissections on a fresh human body were shown to the 1st year MBBS students, and their perception was noted. Materials and Methods: After taking universal precautionary measures, postmortem dissections were shown to students on voluntary donated bodies in the dissection hall, in addition to the traditional teaching on embalmed cadavers. Feedback was taken from students and faculty regarding the utility of these sessions. Results: Better appreciation of texture, orientation, location, and relations of organs in fresh body, integration of teaching, awareness of the process and laws related to body donations were the outcomes of the study. However, the smell and sight of blood was felt to be nauseating by some students, and some students were worried about the spread of infectious diseases. Conclusions: Visualizing single fresh body dissection during 1st year professional MBBS is recommended either on medicolegal autopsy or on voluntarily-donated bodies. PMID:27563594

  15. Maintenance of Vinyl Asbestos and Asphalt Tile Floors in Institutional, Industrial and Commercial Buildings.

    ERIC Educational Resources Information Center

    Asphalt and Vinyl Asbestos Tile Inst., New York, NY.

    The claim is made that proper planning and modest outlays of time, labor, and material costs can provide and maintain a high appearance level for floors in institutional, commercial, and industrial buildings. Instructions for four basic steps in maintaining the good looks of vinyl asbestos and asphalt tile floors are treated in the booklet--(1)…

  16. 74. SAC control center addition sect 9top three floors, first ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    74. SAC control center addition sect 9-top three floors, first floor plan, drawing number AS-BLT.AW30-02-03, dated May, 1958 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  17. 106. Historic American Buildings Survey ORIGINAL DRAWING OF GROUND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    106. Historic American Buildings Survey ORIGINAL DRAWING OF GROUND FLOOR PLAN PHOTOCOPY OF PLATE FROM IRVIN L. SCOTT, 'MARALAGO', THE AMERICAN ARCHITECT (JUNE 20, 1928), P. 798 - Mar-a-Lago, 1100 South Ocean Boulevard, Palm Beach, Palm Beach County, FL

  18. 107. Historic American Buildings Survey ORIGINAL DRAWING OF SECOND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    107. Historic American Buildings Survey ORIGINAL DRAWING OF SECOND FLOOR PLAN PHOTOCOPY OF PLATE FROM IRVIN L. SCOTT, 'MARALAGO', THE AMERICAN ARCHITECT (JUNE 20, 1928), P. 798 - Mar-a-Lago, 1100 South Ocean Boulevard, Palm Beach, Palm Beach County, FL

  19. 36 CFR 910.60 - Gross floor area.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Gross floor area. 910.60 Section 910.60 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA...

  20. 36 CFR 910.60 - Gross floor area.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Gross floor area. 910.60 Section 910.60 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA...

  1. 36 CFR 910.60 - Gross floor area.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Gross floor area. 910.60 Section 910.60 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA...

  2. 6. Photocopy of measured drawing dated December, 1947 FIRST FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Photocopy of measured drawing dated December, 1947 FIRST FLOOR PLAN An addendum to Hanson-Cramer House, Sea Street, south end, Rockport, Knox County, Maine - Hanson-Cramer House, End of Sea Street (moved from Pascal's Avenue), Rockport, Knox County, ME

  3. 7. Photocopy of measured drawing dated December, 1947 SECOND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photocopy of measured drawing dated December, 1947 SECOND FLOOR PLAN An addendum to Hanson-Cramer House, Sea Street, south end, Rockport, Knox County, Maine - Hanson-Cramer House, End of Sea Street (moved from Pascal's Avenue), Rockport, Knox County, ME

  4. 36 CFR 910.60 - Gross floor area.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Gross floor area. 910.60 Section 910.60 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA...

  5. PREFACE: PAGES 1st Young Scientists Meeting (YSM) - 'Retrospective views on our planet's future'

    NASA Astrophysics Data System (ADS)

    Margrethe Basse, Ellen

    2010-03-01

    more recent pollution. The concept and format of the 1st PAGES YSM worked very well, and created a high degree of enthusiasm and stimulation among the participants (as is demonstrated by this special issue). The 2nd YSM is therefore firmly planned to take place in 2013, back-to-back with the 4th PAGES OSM. Crucial and gratefully acknowledged contributions to the success of the YSM were made by the numerous co-sponsors (see logos below), who provided the financial basis for the YSM and supported the attendance of many early-career researchers from various parts of the world. Furthermore, we cordially thank all reviewers for shaping this proceeding issue with their insightful and helpful reviews. Conference photograph

  6. Channel Floor Yardangs

    NASA Technical Reports Server (NTRS)

    2004-01-01

    [figure removed for brevity, see original site]

    Released 19 July 2004 The atmosphere of Mars is a dynamic system. Water-ice clouds, fog, and hazes can make imaging the surface from space difficult. Dust storms can grow from local disturbances to global sizes, through which imaging is impossible. Seasonal temperature changes are the usual drivers in cloud and dust storm development and growth.

    Eons of atmospheric dust storm activity has left its mark on the surface of Mars. Dust carried aloft by the wind has settled out on every available surface; sand dunes have been created and moved by centuries of wind; and the effect of continual sand-blasting has modified many regions of Mars, creating yardangs and other unusual surface forms.

    The yardangs in this image are forming in channel floor deposits. The channel itself is funneling the wind to cause the erosion.

    Image information: VIS instrument. Latitude 4.5, Longitude 229.7 East (133.3 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are

  7. EDITORIAL: The 1st International Conference on Nanomanufacturing (NanoMan2008) The 1st International Conference on Nanomanufacturing (NanoMan2008)

    NASA Astrophysics Data System (ADS)

    Luo, Jack Jiqui; Fang, Fengzhou

    2009-05-01

    Nanomanufacturing is an emerging technology in the field of synthesis of nanomaterials, manufacture of nanodevices, nanosystems and the relevant characterization technologies, and will greatly impact our society and environment: speeding up scientific discovery, technological development, improving healthcare and living standards and slowing down the exhaustion of energy resources, to name but few. The 1st International Conference on Nanomanufacturing (NanoMan2008) was held on the 13-16 July 2008 in Singapore in conjunction with ThinFilm2008 (The 4th International Conference on Technological Advances of Thin Films & Surface Coatings). Approximately 140 delegates from all over the world have participated in the conference and presented their latest discoveries and technological developments. The main focuses of the conference were modern nanomanufacturing by laser machining, focused ion beam fabrication, nano/micro-molding/imprinting, nanomaterial synthesis and characterization, nanometrology and nano/microsystems fabrication and characterization. There was also great interest in applications of nanomanufacturing technologies in traditional areas such as free form machining, polishing and grinding with nano-scale precision and the smoothness of surfaces of objects, and applications in space exploration, military and medicine. This special issue is devoted to NanoMan2008 with a collection of 9 invited talks presented at the conference, covering all the topics of nanomanufacturing technology and development. These papers have been upgraded by the authors with new results and discoveries since the preparation of the conference manuscripts, hence presenting the latest developments. We would like to take this opportunity to thank all the delegates who attended the conference and made the conference successful, and to the authors who contributed papers to this special issue. Thanks also go to the conference committee for their efforts and devotion to the conference. We

  8. Tangential Floor in a Classroom Setting

    ERIC Educational Resources Information Center

    Marti, Leyla

    2012-01-01

    This article examines floor management in two classroom sessions: a task-oriented computer lesson and a literature lesson. Recordings made in the computer lesson show the organization of floor when a task is given to students. Temporary or "incipient" side floors (Jones and Thornborrow, 2004) emerge beside the main floor. In the literature lesson,…

  9. 49 CFR 393.84 - Floors.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Floors. 393.84 Section 393.84 Transportation Other... Miscellaneous Parts and Accessories § 393.84 Floors. The flooring in all motor vehicles shall be substantially... fumes, exhaust gases, or fire. Floors shall not be permeated with oil or other substances likely...

  10. 49 CFR 393.84 - Floors.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Floors. 393.84 Section 393.84 Transportation Other... Miscellaneous Parts and Accessories § 393.84 Floors. The flooring in all motor vehicles shall be substantially... fumes, exhaust gases, or fire. Floors shall not be permeated with oil or other substances likely...

  11. Perceptual narrowing of linguistic sign occurs in the 1st year of life.

    PubMed

    Palmer, Stephanie Baker; Fais, Laurel; Golinkoff, Roberta Michnick; Werker, Janet F

    2012-01-01

    Over their 1st year of life, infants'"universal" perception of the sounds of language narrows to encompass only those contrasts made in their native language (J. F. Werker & R. C. Tees, 1984). This research tested 40 infants in an eyetracking paradigm and showed that this pattern also holds for infants exposed to seen language-American Sign Language (ASL). Four-month-old, English-only, hearing infants discriminated an ASL handshape distinction, while 14-month-old hearing infants did not. Fourteen-month-old ASL-learning infants, however, did discriminate the handshape distinction, suggesting that, as in heard language, exposure to seen language is required for maintenance of visual language discrimination. Perceptual narrowing appears to be a ubiquitous learning mechanism that contributes to language acquisition. PMID:22277043

  12. Meeting report for the 1st skin microbiota workshop, boulder, CO October 15-16 2012

    PubMed Central

    2014-01-01

    This report details the outcome of the 1st Skin Microbiota Workshop, Boulder, CO, held on October 15th-16th 2012. The workshop was arranged to bring Department of Defense personnel together with experts in microbial ecology, human skin physiology and anatomy, and computational techniques for interrogating the microbiome to define research frontiers at the intersection of these important areas. The workshop outlined a series of questions and created several working groups to address those questions, specifically to promote interdisciplinary activity and potential future collaboration. The US Army provided generous grant support and the meeting was organized and hosted by the University of Colorado at Boulder. A primary forward vision of the meeting was the importance of understanding skin microbial communities to improve the health and stealth of US Army warfighters.

  13. 1st ESMO Consensus Conference in lung cancer; Lugano 2010: small-cell lung cancer.

    PubMed

    Stahel, R; Thatcher, N; Früh, M; Le Péchoux, C; Postmus, P E; Sorensen, J B; Felip, E

    2011-09-01

    The 1st ESMO Consensus Conference on lung cancer was held in Lugano, Switzerland on 21st and 22nd May 2010 with the participation of a multidisciplinary panel of leading professionals in pathology and molecular diagnostics and medical, surgical and radiation oncology. Before the conference, the expert panel prepared clinically relevant questions concerning five areas as follows: early and locally advanced non-small-cell lung cancer (NSCLC), first-line metastatic NSCLC, second-/third-line NSCLC, NSCLC pathology and molecular testing, and small-cell lung cancer (SCLC) to be addressed through discussion at the Consensus Conference. All relevant scientific literature for each question was reviewed in advance. During the Consensus Conference, the panel developed recommendations for each specific question. The consensus agreement in SCLC is reported in this article. The recommendations detailed here are based on an expert consensus after careful review of published data. All participants have approved this final update.

  14. 4th generation of the 1st level surface detector trigger in the Pierre Auger Observator

    NASA Astrophysics Data System (ADS)

    Szadkowski, Z.

    The proposal of a new 4th generation of the Front-End with the advanced 1st level triggers for the Infill Array of the Pierre Auger Observatory and for the Auger North is described. Newest FPGA chips offer much higher capacity of logic registers and memories, as well as DSP blocks. The calibration channel, previously supported by an external dual-port RAM, has been fully implemented into FPGA chip, through a large internal memory. In turn DSP blocks allowed on implementation of much more sophisticated spectral trigger algorithms. A single chip simplified board design, newer architecture of FPGA reduced resouces utilization and power consumption. Higher sampling in the new Front- End in comparison with previous 40 MHz designs as well as free resources for new detection algotithms can be a good platform for CR radio detection technique at Auger enhancing a duty cycle for the detection of UHECR’s.

  15. 17 CFR 1.62 - Contract market requirement for floor broker and floor trader registration.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... for floor broker and floor trader registration. 1.62 Section 1.62 Commodity and Securities Exchanges....62 Contract market requirement for floor broker and floor trader registration. (a)(1) Each contract... granted a temporary license as a floor broker; or (ii) Purchase or sell solely for such person's...

  16. 17 CFR 1.62 - Contract market requirement for floor broker and floor trader registration.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... for floor broker and floor trader registration. 1.62 Section 1.62 Commodity and Securities Exchanges....62 Contract market requirement for floor broker and floor trader registration. (a)(1) Each contract... granted a temporary license as a floor broker; or (ii) Purchase or sell solely for such person's...

  17. Functional anatomy of pelvic floor.

    PubMed

    Rocca Rossetti, Salvatore

    2016-03-31

    Generally, descriptions of the pelvic floor are discordant, since its complex structures and the complexity of pathological disorders of such structures; commonly the descriptions are sectorial, concerning muscles, fascial developments, ligaments and so on. On the contrary to understand completely nature and function of the pelvic floor it is necessary to study it in the most unitary view and in the most global aspect, considering embriology, philogenesy, anthropologic development and its multiple activities others than urological, gynaecological and intestinal ones. Recent acquirements succeeded in clarifying many aspects of pelvic floor activity, whose musculature has been investigated through electromyography, sonography, magnetic resonance, histology, histochemistry, molecular research. Utilizing recent research concerning not only urinary and gynecologic aspects but also those regarding statics and dynamics of pelvis and its floor, it is now possible to study this important body part as a unit; that means to consider it in the whole body economy to which maintaining upright position, walking and behavior or physical conduct do not share less than urinary, genital, and intestinal functions. It is today possible to consider the pelvic floor as a musclefascial unit with synergic and antagonistic activity of muscular bundles, among them more or less interlaced, with multiple functions and not only the function of pelvic cup closure.

  18. 26. VIEW OF CUT AWAY FLOOR BUILDING 23 2ND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. VIEW OF CUT AWAY FLOOR BUILDING 23 2ND FLOOR SHOWING TYPICAL MILL CONSTRUCTION (SECTION OF FLOOR CONTAMINATED WITH HAZARDOUS MATERIAL WAS REMOVED FOR DISPOSAL) - Bryant Electric Company, 1421 State Street, Bridgeport, Fairfield County, CT

  19. PREFACE: 1st European Conference on Gas Micro Flows (GasMems 2012)

    NASA Astrophysics Data System (ADS)

    Frijns, Arjan; Valougeorgis, Dimitris; Colin, Stéphane; Baldas, Lucien

    2012-05-01

    The aim of the 1st European Conference on Gas Micro Flows is to advance research in Europe and worldwide in the field of gas micro flows as well as to improve global fundamental knowledge and to enable technological applications. Gas flows in microsystems are of great importance and touch almost every industrial field (e.g. fluidic microactuators for active control of aerodynamic flows, vacuum generators for extracting biological samples, mass flow and temperature micro-sensors, pressure gauges, micro heat-exchangers for the cooling of electronic components or for chemical applications, and micro gas analyzers or separators). The main characteristic of gas microflows is their rarefaction, which for device design often requires modelling and simulation both by continuous and molecular approaches. In such flows various non-equilibrium transport phenomena appear, while the role played by the interaction between the gas and the solid device surfaces becomes essential. The proposed models of boundary conditions often need an empirical adjustment strongly dependent on the micro manufacturing technique. The 1st European Conference on Gas Micro Flows is organized under the umbrella of the recently established GASMEMS network (www.gasmems.eu/) consisting of 13 participants and six associate members. The main objectives of the network are to structure research and train researchers in the fields of micro gas dynamics, measurement techniques for gaseous flows in micro experimental setups, microstructure design and micro manufacturing with applications in lab and industry. The conference takes place on June 6-8 2012, at the Skiathos Palace Hotel, on the beautiful island of Skiathos, Greece. The conference has received funding from the European Community's Seventh Framework Programme FP7/2007-2013 under grant agreement ITN GASMEMS no. 215504. It owes its success to many people. We would like to acknowledge the support of all members of the Scientific Committee and of all

  20. PREFACE: 1st International Conference on Rheology and Modeling of Materials

    NASA Astrophysics Data System (ADS)

    Gömze, László A.

    2015-04-01

    Understanding the rheological properties of materials and their rheological behaviors during their manufacturing processes and in their applications in many cases can help to increase the efficiency and competitiveness not only of the finished goods and products but the organizations and societies also. The more scientific supported and prepared organizations develop more competitive products with better thermal, mechanical, physical, chemical and biological properties and the leading companies apply more competitive knowledge, materials, equipment and technology processes. The idea to organize in Hungary the 1st International Conference on Rheology and Modeling of Materials we have received from prospective scientists, physicists, chemists, mathematicians and engineers from Asia, Europe, North and South America including India, Korea, Russia, Turkey, Estonia, France, Italy, United Kingdom, Chile, Mexico and USA. The goals of ic-rmm1 the 1st International Conference on Rheology and Modeling of Materials are the following: • Promote new methods and results of scientific research in the fields of modeling and measurements of rheological properties and behavior of materials under processing and applications. • Change information between the theoretical and applied sciences as well as technical and technological implantations. • Promote the communication between the scientists of different disciplines, nations, countries and continents. The international conference ic-rmm1 provides a platform among the leading international scientists, researchers, PhD students and engineers for discussing recent achievements in measurement, modeling and application of rheology in materials technology and materials science of liquids, melts, solids, crystals and amorphous structures. Among the major fields of interest are the influences of material structures, mechanical stresses temperature and deformation speeds on rheological and physical properties, phase transformation of

  1. Ploughing the deep sea floor.

    PubMed

    Puig, Pere; Canals, Miquel; Company, Joan B; Martín, Jacobo; Amblas, David; Lastras, Galderic; Palanques, Albert

    2012-09-13

    Bottom trawling is a non-selective commercial fishing technique whereby heavy nets and gear are pulled along the sea floor. The direct impact of this technique on fish populations and benthic communities has received much attention, but trawling can also modify the physical properties of seafloor sediments, water–sediment chemical exchanges and sediment fluxes. Most of the studies addressing the physical disturbances of trawl gear on the seabed have been undertaken in coastal and shelf environments, however, where the capacity of trawling to modify the seafloor morphology coexists with high-energy natural processes driving sediment erosion, transport and deposition. Here we show that on upper continental slopes, the reworking of the deep sea floor by trawling gradually modifies the shape of the submarine landscape over large spatial scales. We found that trawling-induced sediment displacement and removal from fishing grounds causes the morphology of the deep sea floor to become smoother over time, reducing its original complexity as shown by high-resolution seafloor relief maps. Our results suggest that in recent decades, following the industrialization of fishing fleets, bottom trawling has become an important driver of deep seascape evolution. Given the global dimension of this type of fishery, we anticipate that the morphology of the upper continental slope in many parts of the world’s oceans could be altered by intensive bottom trawling, producing comparable effects on the deep sea floor to those generated by agricultural ploughing on land. PMID:22951970

  2. Flooring for Schools: Unsightly Walkways

    ERIC Educational Resources Information Center

    Baxter, Mark

    2011-01-01

    Many mattress manufacturers recommend that consumers rotate their mattresses at least twice a year to help prevent soft spots from developing and increase the product's life span. It's unfortunate that the same kind of treatment can't be applied to flooring for schools, such as carpeting, especially in hallways. Being able to flip or turn a carpet…

  3. Ploughing the deep sea floor.

    PubMed

    Puig, Pere; Canals, Miquel; Company, Joan B; Martín, Jacobo; Amblas, David; Lastras, Galderic; Palanques, Albert

    2012-09-13

    Bottom trawling is a non-selective commercial fishing technique whereby heavy nets and gear are pulled along the sea floor. The direct impact of this technique on fish populations and benthic communities has received much attention, but trawling can also modify the physical properties of seafloor sediments, water–sediment chemical exchanges and sediment fluxes. Most of the studies addressing the physical disturbances of trawl gear on the seabed have been undertaken in coastal and shelf environments, however, where the capacity of trawling to modify the seafloor morphology coexists with high-energy natural processes driving sediment erosion, transport and deposition. Here we show that on upper continental slopes, the reworking of the deep sea floor by trawling gradually modifies the shape of the submarine landscape over large spatial scales. We found that trawling-induced sediment displacement and removal from fishing grounds causes the morphology of the deep sea floor to become smoother over time, reducing its original complexity as shown by high-resolution seafloor relief maps. Our results suggest that in recent decades, following the industrialization of fishing fleets, bottom trawling has become an important driver of deep seascape evolution. Given the global dimension of this type of fishery, we anticipate that the morphology of the upper continental slope in many parts of the world’s oceans could be altered by intensive bottom trawling, producing comparable effects on the deep sea floor to those generated by agricultural ploughing on land.

  4. Identifying 1st instar larvae for three forensically important blowfly species using "fingerprint" cuticular hydrocarbon analysis.

    PubMed

    Moore, Hannah E; Adam, Craig D; Drijfhout, Falko P

    2014-07-01

    Calliphoridae are known to be the most forensically important insects when it comes to establishing the minimum post mortem interval (PMImin) in criminal investigations. The first step in calculating the PMImin is to identify the larvae present to species level. Accurate identification which is conventionally carried out by morphological analysis is crucial because different insects have different life stage timings. Rapid identification in the immature larvae stages would drastically cut time in criminal investigations as it would eliminate the need to rear larvae to adult flies to determine the species. Cuticular hydrocarbon analysis on 1st instar larvae has been applied to three forensically important blowflies; Lucilia sericata, Calliphora vicina and Calliphora vomitoria, using gas chromatography-mass spectrometry (GC-MS) and principal component analysis (PCA). The results show that each species holds a distinct "fingerprint" hydrocarbon profile, allowing for accurate identification to be established in 1-day old larvae, when it can be challenging to apply morphological criteria. Consequently, this GC-MS based technique could accelerate and strengthen the identification process, not only for forensically important species, but also for other entomological samples which are hard to identify using morphological features.

  5. The relation between 1st grade grey matter volume and 2nd grade math competence.

    PubMed

    Price, Gavin R; Wilkey, Eric D; Yeo, Darren J; Cutting, Laurie E

    2016-01-01

    Mathematical and numerical competence is a critical foundation for individual success in modern society yet the neurobiological sources of individual differences in math competence are poorly understood. Neuroimaging research over the last decade suggests that neural mechanisms in the parietal lobe, particularly the intraparietal sulcus (IPS) are structurally aberrant in individuals with mathematical learning disabilities. However, whether those same brain regions underlie individual differences in math performance across the full range of math abilities is unknown. Furthermore, previous studies have been exclusively cross-sectional, making it unclear whether variations in the structure of the IPS are caused by or consequences of the development of math skills. The present study investigates the relation between grey matter volume across the whole brain and math competence longitudinally in a representative sample of 50 elementary school children. Results show that grey matter volume in the left IPS at the end of 1st grade relates to math competence a year later at the end of 2nd grade. Grey matter volume in this region did not change over that year, and was still correlated with math competence at the end of 2nd grade. These findings support the hypothesis that the IPS and its associated functions represent a critical foundation for the acquisition of mathematical competence. PMID:26334946

  6. The relation between 1st grade grey matter volume and 2nd grade math competence.

    PubMed

    Price, Gavin R; Wilkey, Eric D; Yeo, Darren J; Cutting, Laurie E

    2016-01-01

    Mathematical and numerical competence is a critical foundation for individual success in modern society yet the neurobiological sources of individual differences in math competence are poorly understood. Neuroimaging research over the last decade suggests that neural mechanisms in the parietal lobe, particularly the intraparietal sulcus (IPS) are structurally aberrant in individuals with mathematical learning disabilities. However, whether those same brain regions underlie individual differences in math performance across the full range of math abilities is unknown. Furthermore, previous studies have been exclusively cross-sectional, making it unclear whether variations in the structure of the IPS are caused by or consequences of the development of math skills. The present study investigates the relation between grey matter volume across the whole brain and math competence longitudinally in a representative sample of 50 elementary school children. Results show that grey matter volume in the left IPS at the end of 1st grade relates to math competence a year later at the end of 2nd grade. Grey matter volume in this region did not change over that year, and was still correlated with math competence at the end of 2nd grade. These findings support the hypothesis that the IPS and its associated functions represent a critical foundation for the acquisition of mathematical competence.

  7. The U.S. Naval Observatory Robotic Astrometric Telescope 1st Catalog (URAT1)

    NASA Astrophysics Data System (ADS)

    Zacharias, Norbert; Finch, Charlie T.; Subasavage, John P.; Tilleman, Trudy; DiVittorio, Mike; Harris, Hugh C.; Rafferty, Ted; Wieder, Gary; Eric Ferguson, Chris Kilian, Albert Rhodes, Mike Schultheis

    2015-01-01

    The 1st USNO Robotic Astrometric Telescope Catalog (URAT1) is about tobe released. It contains accurate positions (typically 10 to 30 mas std.error) of 220 million stars, mainly on the northern hemisphere. Propermotions were obtained for 85% of these stars utilizing the 2MASS as 1stepoch. URAT1 is supplemented by 2MASS and APASS photometry. The URAT1catalog was derived from 2 years of operations (April 2012 to April 2014)of the USNO "redlens" astrograph with its 474 Mpx 4-shooter camera at theNaval Observatory Flagstaff Station (NOFS) in a joint effort betweenUSNO's Astrometry Department and NOFS. Due to a combination of longexposures and short exposures with objective grating, URAT1 observationscover the large 3 to 18.5 magnitude range in a single 680-750 nm bandpass.The catalog properties are presented together with a brief summary ofobservations and reductions methods. URAT1 has on average about 4-timesthe number of stars per square degree and is 4-times more accurate thanUCAC4. URAT1 will serve as the currently most accurate astrometric anddeep photometric optical reference star catalog until the delivery ofthe Gaia catalog.

  8. 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop: April 5-7, 2011

    SciTech Connect

    Not Available

    2011-10-01

    The U.S. marine energy industry is actively pursuing development of offshore wind and marine hydrokinetic (MHK) energy systems. Experience in the wind energy sector demonstrates that new technology development requires thorough measurement and characterization of the environmental conditions prevalent at installation sites and of technology operating in the field. Presently, there are no turn-key instrumentation system solutions that meet the measurement needs of the marine energy industry. The 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop brought together technical experts from government laboratories, academia, and industry representatives from marine energy, wind, offshore oil and gas, and instrumentation developers to present and discuss the instrumentation needs of the marine energy industry. The goals of the meeting were to: (1) Share the latest relevant knowledge among technical experts; (2) Review relevant state-of-the-art field measurement technologies and methods; (3) Review lessons learned from recent field deployments; (4) Identify synergies across different industries; (5) Identify gaps between existing and needed instrumentation capabilities; (6) Understand who are the leading experts; (7) Provide a forum where stakeholders from the marine energy industry could provide substantive input in the development of new marine energy field deployable instrumentation packages.

  9. 1st paleomagnetic investigation of Nubia Sandstone at Kalabsha, south Western Desert of Egypt

    NASA Astrophysics Data System (ADS)

    Mostafa, R.; Khashaba, A.; El-Hemaly, I. A.; Takla, E. M.; Abdel Aal, E.; Odah, H.

    2016-06-01

    Two profiles have been sampled from the Nubia Sandstone at Aswan, south Western Desert: the 1st profile has been taken from Abu Aggag Formation and the 2nd one was from Sabaya Formation (23.25 °N, 32.75 °E). 136 oriented cores (from 9 sites) have been sampled. Abu Aggag Formation is of Late Cretaceous (Turonian) and Sabaya Formation is of early Cretaceous (Albian-Cenomanian). The studied rocks are subjected to rock magnetic measurements as well as demagnetization treatment. It has been found that hematite is the main magnetic mineral in both formations. Four profile sections from Abu Aggag Formation, yielded a magnetic component with D = 352.7°, I = 36.6° with α95 = 5.2° and the corresponding pole lies at Lat. = 82.8 °N and Long. = 283.1 °E. Five profile sections from Sabaya Formation, yielded a magnetic component with D = 348.6°, I = 33.3° with α95 = 5.8° and the corresponding pole lies at Lat. = 78.3 °N and Long. = 280.4 °E. The obtained paleopole for the two formations lies at Lat. = 80.5 °N and Long. = 281.7 °E. The obtaind magnetic components are considered primary and the corresponding paleopole reflects the age of Nubia Sandstone when compared with the previously obtained Cretaceous poles for Egypt.

  10. Wind-US Results for the AIAA 1st Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Yoder, Dennis; Dippold, Vance, III; Georgiadis, Nicholas

    2012-01-01

    This presentation contains Wind-US results presented at the 1st Propulsion Aerodynamics Workshop. The The workshop was organized by the American Institute of Aeronautics and Astronautics, Air Breathing Propulsion Propulsion Systems Integration Technical Committee with the purpose of assessing the accuracy of computational computational fluid dynamics for air breathing propulsion applications. Attendees included representatives from representatives from government, industry, academia, and commercial software companies. Participants were were encouraged to explore and discuss all aspects of the simulation process including the effects of mesh type and mesh type and refinement, solver numerical schemes, and turbulence modeling. The first set of challenge cases involved computing the thrust and discharge coefficients for a series of convergent convergent nozzles for a range of nozzle pressure ratios between 1.4 and 7.0. These configurations included a included a reference axisymmetric nozzle as well as 15deg , 25deg , and 40deg conical nozzles. Participants were also asked also asked to examine the plume shock structure for two cases where the 25deg conical nozzle was bifurcated by a bifurcated by a solid plate. The final test case was a serpentine inlet diffuser with an outlet to inlet area ratio of 1.52 ratio of 1.52 and an offset of 1.34 times the inlet diameter. Boundary layer profiles, wall static pressure, and total and total pressure at downstream rake locations were examined.

  11. PROPAGATION AND EVOLUTION OF THE JUNE 1st 2008 CME IN THE INTERPLANETARY MEDIUM

    NASA Astrophysics Data System (ADS)

    Nieves-Chinchilla, T.; Lamb, D. A.; Davila, J. M.; Vinas, A. F.; Moestl, C.; Hidalgo, M. A.; Farrugia, C. J.; Malandraki, O.; Dresing, N.; Gómez-Herrero, R.

    2009-12-01

    In this work we present a study of the coronal mass ejection (CME) of June 1st of 2008 in the interplanetary medium. This event has been extensively studied by others because of its favorable geometry and the possible consequences of its peculiar initiation for space weather forecasting. We show an analysis of the evolution of the CME in the interplanetary medium in order to shed some light on the propagation mechanism of the ICME. We have determined the typical shock associated characteristics of the ICME in order to understand the propagation properties. Using two different non force-free models of the magnetic cloud allows us to incorporate expansion of the cloud. We use in-situ measurements from STEREO B/IMPACT to characterize the ICME. In addition, we use images from STEREO A/SECCHI-HI to analyze the propagation and visual evolution of the associated flux rope in the interplanetary medium. We compare and contrast these observations with the results of the analytical models.

  12. 78 FR 47698 - Notice to all Interested Parties of the Termination of the Receivership of 10183, 1st American...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-06

    ... From the Federal Register Online via the Government Publishing Office FEDERAL DEPOSIT INSURANCE CORPORATION Notice to all Interested Parties of the Termination of the Receivership of 10183, 1st American State Bank of Minnesota Hancock, MN Notice is hereby given that the Federal Deposit...

  13. Laying a Foundation for Lifelong Learning: Case Studies of E-Assessment in Large 1st-Year Classes

    ERIC Educational Resources Information Center

    Nicol, David

    2007-01-01

    Concerns about noncompletion and the quality of the 1st-year student experience have been linked to recent changes in higher education such as modularisation, increased class sizes, greater diversity in the student intake and reduced resources. Improving formative assessment and feedback processes is seen as one way of addressing academic failure,…

  14. 78 FR 7781 - Filing Dates for the South Carolina Special Elections in the 1st Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-04

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the South Carolina Special Elections in the 1st Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special elections. SUMMARY: South Carolina...

  15. Bills to Increase Employment Opportunities through the Youth Conservation Corps and Other Means, 95th Congress, 1st Session.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC.

    This packet contains nine Senate bills and eight House bills from the 95th Congress, 1st session, all dealing with various means of increasing employment opportunities. Most of the bills deal with the creation of new jobs or with programs for job training, counseling, or placement. Seven of the bills constitute amendments to the Youth Conservation…

  16. Jordanian Kindergarten and 1st-Grade Teachers' Beliefs about Child-Based Dimensions of School Readiness

    ERIC Educational Resources Information Center

    Fayez, Merfat; Ahmad, Jamal Fathi; Oliemat, Enass

    2016-01-01

    The purpose of this study was to explore the beliefs of Jordanian kindergarten and 1st-grade teachers regarding six child-based dimensions of school readiness: academic knowledge, basic thinking skills, socioemotional maturity, physical well-being and motor development, self-discipline, and communication skills. Questionnaires were used to collect…

  17. Maternal Sleep-Related Cognitions and Infant Sleep: A Longitudinal Study from Pregnancy through the 1st Year

    ERIC Educational Resources Information Center

    Tikotzky, Liat; Sadeh, Avi

    2009-01-01

    Infant sleep is a major source of concern for many parents. The aims of this longitudinal study were to assess: (a) the development of sleep patterns among infants, (b) the development of maternal cognitions regarding infant sleep, and (c) the relations between these domains during the 1st year of life. Eighty-five mothers were recruited during…

  18. Addressing the Effects of Reciprocal Teaching on the Receptive and Expressive Vocabulary of 1st-Grade Students

    ERIC Educational Resources Information Center

    Mandel, Eliana; Osana, Helena P.; Venkatesh, Vivek

    2013-01-01

    This study evaluated the effects of Adapted Reciprocal Teaching (ART) on the receptive and expressive flight-word vocabulary of 1st-grade students. During ART, classroom interactions produced narrative contexts within which students assumed responsibility for applying new flight words in personally meaningful ways. Students in the control group…

  19. Raise the Floor When Remodeling Science Labs

    ERIC Educational Resources Information Center

    Nation's Schools, 1972

    1972-01-01

    A new remodeling idea adopts the concept of raised floor covering gas, water, electrical, and drain lines. The accessible floor has removable panels set into an adjustable support frame 24 inches above a concrete subfloor. (Author)

  20. Sea-Floor Spreading and Transform Faults

    ERIC Educational Resources Information Center

    Armstrong, Ronald E.; And Others

    1978-01-01

    Presents the Crustal Evolution Education Project (CEEP) instructional module on Sea-Floor Spreading and Transform Faults. The module includes activities and materials required, procedures, summary questions, and extension ideas for teaching Sea-Floor Spreading. (SL)

  1. Creating Research-Rich Learning Experiences and Quantitative Skills in a 1st Year Earth Systems Course

    NASA Astrophysics Data System (ADS)

    King, P. L.; Eggins, S.; Jones, S.

    2014-12-01

    We are creating a 1st year Earth Systems course at the Australian National University that is built around research-rich learning experiences and quantitative skills. The course has top students including ≤20% indigenous/foreign students; nonetheless, students' backgrounds in math and science vary considerably posing challenges for learning. We are addressing this issue and aiming to improve knowledge retention and deep learning by changing our teaching approach. In 2013-2014, we modified the weekly course structure to a 1hr lecture; a 2hr workshop with hands-on activities; a 2hr lab; an assessment piece covering all face-to-face activities; and a 1hr tutorial. Our new approach was aimed at: 1) building student confidence with data analysis and quantitative skills through increasingly difficult tasks in science, math, physics, chemistry, climate science and biology; 2) creating effective learning groups using name tags and a classroom with 8-person tiered tables; 3) requiring students to apply new knowledge to new situations in group activities, two 1-day field trips and assessment items; 4) using pre-lab and pre-workshop exercises to promote prior engagement with key concepts; 5) adding open-ended experiments to foster structured 'scientific play' or enquiry and creativity; and 6) aligning the assessment with the learning outcomes and ensuring that it contains authentic and challenging southern hemisphere problems. Students were asked to design their own ocean current experiment in the lab and we were astounded by their ingenuity: they simulated the ocean currents off Antarctica; varied water density to verify an equation; and examined the effect of wind and seafloor topography on currents. To evaluate changes in student learning, we conducted surveys in 2013 and 2014. In 2014, we found higher levels of student engagement with the course: >~80% attendance rates and >~70% satisfaction (20% neutral). The 2014 cohort felt that they were more competent in writing

  2. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor surfaces on aisles, places for standees, and...

  3. 14 CFR 25.793 - Floor surfaces.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Floor surfaces. 25.793 Section 25.793 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Personnel and Cargo Accommodations § 25.793 Floor surfaces. The floor surface of...

  4. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor surfaces on aisles, places for standees, and...

  5. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 1 2014-10-01 2014-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor surfaces on aisles, places for standees, and...

  6. 7 CFR 2902.39 - Floor strippers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Floor strippers. (a) Definition. Products that are formulated to loosen waxes, resins, or varnishes from floor surfaces. They can be in either liquid or gel form, and may also be used with or without... 7 Agriculture 15 2010-01-01 2010-01-01 false Floor strippers. 2902.39 Section 2902.39...

  7. 7 CFR 993.107 - Floor inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Floor inspection. 993.107 Section 993.107 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Administrative Rules and Regulations Definitions § 993.107 Floor inspection. Floor inspection means inspection...

  8. 7 CFR 993.505 - Floor inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Floor inspection. 993.505 Section 993.505 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Pack Specification as to Size Definitions § 993.505 Floor inspection. Floor inspection means...

  9. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor...

  10. 7 CFR 993.505 - Floor inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Floor inspection. 993.505 Section 993.505 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Pack Specification as to Size Definitions § 993.505 Floor inspection. Floor inspection means...

  11. 14 CFR 25.793 - Floor surfaces.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Floor surfaces. 25.793 Section 25.793 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Floor surfaces. The floor surface of all areas which are likely to become wet in service must have...

  12. 7 CFR 993.107 - Floor inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Floor inspection. 993.107 Section 993.107 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Administrative Rules and Regulations Definitions § 993.107 Floor inspection. Floor inspection means inspection...

  13. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE... Rail Vehicles and Systems § 1192.59 Floor surfaces. Floor surfaces on aisles, places for standees,...

  14. 14 CFR 25.793 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Floor surfaces. 25.793 Section 25.793 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Floor surfaces. The floor surface of all areas which are likely to become wet in service must have...

  15. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE... Rail Vehicles and Systems § 1192.59 Floor surfaces. Floor surfaces on aisles, places for standees,...

  16. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor...

  17. PREFACE: 1st Conference on Light and Particle Beams in Materials Science 2013 (LPBMS2013)

    NASA Astrophysics Data System (ADS)

    Kumai, Reiji; Murakami, Youichi

    2014-04-01

    From 29-31 August 2013, the 1st International Conference on Light and Particle Beams in Materials Science, LPBMS 2013, took place in the Tsukuba International Congress Center in the city of Tsukuba, Japan. The conference was a continuation of the international series Synchrotron Radiation in Materials Science (SRMS), which started in 1994. The last one, SRMS-7, was held in Oxford UK 11-14 July 2010, where the International Advisory Committee (IAC) recommended the conference be enlarged to incorporate Materials Research from Neutron, Muon, and Slow Positron Sources, as well as the science emerging from Synchrotron Light Sources. The conference brought together contributions from academics and industrial researchers with a diverse background and experience from the physics, chemistry and engineering communities. The topics covered in the LPBMS2013 include strongly correlated electron systems, magnetism and magnetic materials, soft matter, interface and surface defects, catalysts, biomaterials, and ceramics. In the 3-day scientific program, the conference consisted of 9 plenary talks, 33 invited talks, 20 oral presentations, and 126 poster presentations. We are pleased to publish the proceedings of the LPBMS2013 in this volume of Journal of Physics: Conference Series. This volume contains 58 papers representing the work that was presented and discussed at the conference. We hope that this volume will promote further development of this interdisciplinary materials research emerging from synchrotron light, neutron, muon, and slow positron sciences. Finally, we would like to thank the International Advisory Committee (Chair: Professor G N Greaves), sponsors, all the participants and contributors for making possible this international meeting of researchers. Reiji Kumai & Youichi Murakami Conference photograph Details of the program and organizing committees are available in the pdf

  18. Foreword to Selected presentations from the 1st European Hip Sport Meeting.

    PubMed

    Dallari, Dante; Ribas, Manuel

    2016-05-14

    Recent years have witnessed a growing number of people practising sports both at professional and amateur level. This trend led to a progressive rise in the incidence and prevalence of acute and chronic hip damage. The treatment of hip disease in subjects practising sports is a major challenge for the orthopaedic surgeon. The evaluation of patients, in particular those of young age with high functional demands, is inevitably complex and should be performed with a multidisciplinary approach; from a surgical point of view, it is essential to carefully assess whether the indication is towards conservative surgery or hip replacement surgery. The advent of arthroscopic surgery in recent years has allowed us to improve our knowledge of hip joint diseases, such as femoroacetabular impingement that is typical of sports and overuse activity. A correct and early diagnosis of the disease can direct the patient promptly to a conservative surgical treatment that could reduce the progression of degenerative pathology. However, when the joint is permanently damaged, the only reliable solution remains prosthetic surgery, leading to a series of issues that the orthopaedic surgeon should be able to master, leading to a thoughtful decision on, for example, which implant to use, which biomaterials, which surgical approach or which sport to practise after surgery. This supplement contains selected contributions stemming from the work performed by internationally recognised experts in the field and presented during the 1st European Hip Sport Meeting held in Bologna on May 19th, 20th, 2016 that we had the honour to co-chair. We hope that these contributions will help the orthopaedic surgeon, the sports physician and physiotherapist in their day-to-day practice, and will help in fulfilling our ultimate aim to improve the knowledge of the hip pathology related to sports and overuse activities. PMID:27174057

  19. Patterns of Irregular Burials in Western Europe (1st-5th Century A.D.)

    PubMed Central

    Milella, Marco; Mariotti, Valentina; Belcastro, Maria Giovanna; Knüsel, Christopher J.

    2015-01-01

    Background Irregular burials (IB—burials showing features that contrast with the majority of others in their geographic and chronological context) have been the focus of archaeological study because of their relative rarity and enigmatic appearance. Interpretations of IB often refer to supposed fear of the dead or to social processes taking place in time-specific contexts. However, a comprehensive and quantitative analysis of IB for various geographical contexts is still lacking, a fact that hampers any discussion of these burials on a larger scale. Methods Here, we collected a bibliographic dataset of 375 IB from both Britain and Continental Europe, altogether spanning a time period from the 1st to the 5th century AD. Each burial has been coded according to ten dichotomous variables, further analyzed by means of chi-squared tests on absolute frequencies, non-metric multidimensional scaling, and cluster analysis. Results Even acknowledging the limits of this study, and in particular the bias represented by the available literature, our results point to interesting patterns. Geographically, IB show a contrast between Britain and Continental Europe, possibly related to historical processes specific to these regions. Different types of IB (especially prone depositions and depositions with the cephalic extremity displaced) present a series of characteristics and associations between features that permit a more detailed conceptualization of these occurrences from a socio-cultural perspective that aids to elucidate their funerary meaning. Conclusions and Significance Altogether, the present work stresses the variability of IB, and the need to contextualize them in a proper archaeological and historical context. It contributes to the discussion of IB by providing a specific geographic and chronological frame of reference that supports a series of hypotheses about the cultural processes possibly underlying their occurrence. PMID:26115408

  20. Computational Simulations of Convergent Nozzles for the AIAA 1st Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Dippold, Vance F., III

    2014-01-01

    Computational Fluid Dynamics (CFD) simulations were completed for a series of convergent nozzles in participation of the American Institute of Aeronautics and Astronautics (AIAA) 1st Propulsion Aerodynamics Workshop. The simulations were performed using the Wind-US flow solver. Discharge and thrust coefficients were computed for four axisymmetric nozzles with nozzle pressure ratios (NPR) ranging from 1.4 to 7.0. The computed discharge coefficients showed excellent agreement with available experimental data; the computed thrust coefficients captured trends observed in the experimental data, but over-predicted the thrust coefficient by 0.25 to 1.0 percent. Sonic lines were computed for cases with NPR >= 2.0 and agreed well with experimental data for NPR >= 2.5. Simulations were also performed for a 25 deg. conic nozzle bifurcated by a flat plate at NPR = 4.0. The jet plume shock structure was compared with and without the splitter plate to the experimental data. The Wind-US simulations predicted the shock structure well, though lack of grid resolution in the plume reduced the sharpness of the shock waves. Unsteady Reynolds-Averaged Navier-Stokes (URANS) simulations and Detached Eddy Simulations (DES) were performed at NPR = 1.6 for the 25 deg conic nozzle with splitter plate. The simulations predicted vortex shedding from the trailing edge of the splitter plate. However, the vortices of URANS and DES solutions appeared to dissipate earlier than observed experimentally. It is believed that a lack of grid resolution in the region of the vortex shedding may have caused the vortices to break down too soon

  1. Modelling the pelvic floor for investigating difficulties during childbirth

    NASA Astrophysics Data System (ADS)

    Li, Xinshan; Kruger, Jennifer A.; Chung, Jae-Hoon; Nash, Martyn P.; Nielsen, Poul M. F.

    2008-03-01

    Research has suggested that athletes involved in high-intensity sports for sustained periods have a higher probability of experiencing prolonged second stage of labour compared to non-athletes. The mechanism responsible for this complication is unknown but may depend on the relative size or tone of the pelvic floor muscles. Prolonged training can result in enlargement and stiffening of these muscles, providing increased resistance as the fetal head descends through the birth canal during a vaginal birth. On the other hand, recent studies have suggested an association between increased muscle bulk in athletes and higher distensibility. This project aims to use mathematical modelling to study the relationship between the size and tone of the pelvic floor muscles and the level of difficulty during childbirth. We obtained sets of magnetic resonance (MR) images of the pelvic floor region for a female athlete and a female non-athlete. Thirteen components of the pelvic floor were segmented and used to generate finite element (FE) models. The fetal head data was obtained by laser scanning a skull replica and a FE model was fitted to these data. We used contact mechanics to simulate the motion of the fetal head moving through the pelvic floor, constructed from the non-athlete data. A maximum stretch ratio of 3.2 was induced in the muscle at the left lateral attachment point to the pubis. We plan to further improve our modelling framework to include active muscle contraction and fetal head rotations in order to address the hypotheses that there is a correlation between the level of difficulty and the size or tone of the pelvic floor muscles.

  2. SOUTH FIRE HOUSE, FIRST FLOOR FRAMING AND DETAILS, BUILDING NO. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SOUTH FIRE HOUSE, FIRST FLOOR FRAMING AND DETAILS, BUILDING NO. 726 (Also includes a foundation plan). Navy Yard, Mare Island, CA. Y & D (Yards & Docks) drawing no. 282852, approved October 22, 194_ (year not given); file no. 726-S-1; stamped "Record drawing to accompany technical report on contract no. 4550, project no. 16." Various scales. 71 cm x 86 cm. Ink on vellum. - Mare Island Naval Shipyard, South Fire Station, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

  3. PREFACE: 1st International Conference on Mechanical Engineering Research 2011 (ICMER2011)

    NASA Astrophysics Data System (ADS)

    Abu Bakar, Rosli

    2012-09-01

    The year 2010 represented a significant milestone in the history of the Mechanical Engineering community with the organization of the first and second national level conferences (National Conference in Mechanical Engineering for Research, 1st and 2nd NCMER) at Universiti Malaysia Pahang on 26-27 May and 3-4 December 2010. The conferences attracted a large number of delegates from different premier academic and research institutions in the country to participate and share their research experiences at the conference. The International Conference on Mechanical Engineering Research (ICMER 2011) followed on from the first and second conferences due to good support from researchers. The ICMER 2011 is a good platform for researchers and postgraduate students to present their latest finding in research. The conference covers a wide range of topics including the internal combustion engine, machining processes, heat and mass transfer, fuel, biomechanical analysis, aerodynamic analysis, thermal comfort, computational techniques, design and simulation, automotive transmission, optimization techniques, hybrid electric vehicles, engine vibration, heat exchangers, finite element analysis, computational fluid dynamics, green energy, vehicle dynamics renewable energy, combustion, design, product development, advanced experimentation techniques, to name but a few. The international conference has helped to bridge the gap between researchers working at different institutions and in different countries to share their knowledge and has helped to motivate young scientists with their research. This has also given some clear direction for further research from the deliberations of the conference. Several people have contributed in different ways to the success of the conference. We thank the keynote speakers and all authors of the contributed papers, for the cooperation rendered to us in the publication of the CD conference proceedings. In particular, we would like to place on record our

  4. PREFACE: 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies

    NASA Astrophysics Data System (ADS)

    Shuja Syed, Ahmed

    2013-12-01

    The 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies (ICSICCST-2013), took place in Karachi, Pakistan, from 24-26 June 2013. It was organized by Indus University, Karachi, in collaboration with HEJ Research Institute of Chemistry, University of Karachi, Karachi. More than 80 abstracts were submitted to the conference and were double blind-reviewed by an international scientific committee. The topics of the Conference were: Video, Image & Voice Sensing Sensing for Industry, Environment, and Health Automation and Controls Laser Sensors and Systems Displays for Innovative Applications Emerging Technologies Unmanned, Robotic, and Layered Systems Sensing for Defense, Homeland Security, and Law Enforcement The title of the conference, 'Sensing for Industry, Control, Communication & Security Technologies' is very apt in capturing the main issues facing the industry of Pakistan and the world. We believe the sensing industry, particularly in Pakistan, is currently at a critical juncture of its development. The future of the industry will depend on how the industry players choose to respond to the challenge of global competition and opportunities arising from strong growth in the Asian region for which we are pleased to note that the conference covered a comprehensive spectrum of issues with an international perspective. This will certainly assist industry players to make informed decisions in shaping the future of the industry. The conference gathered qualified researchers from developed countries like USA, UK, Sweden, Saudi Arabia, China, South Korea and Malaysia etc whose expertise resulting from the research can be drawn upon to build an exploitable area of new technology that has potential Defense, Homeland Security, and Military applicability. More than 250 researchers/students attended the event and made the event great success as the turnout was 100%. An exceptional line-up of speakers spoke at the occasion. We want

  5. Effects of the April 1st, 2014 GLONASS Outage on GNSS Receivers

    NASA Astrophysics Data System (ADS)

    Blume, F.; Berglund, H. T.; Romero, I.; D'Anastasio, E.

    2014-12-01

    The use of multi-constellation GNSS receivers has been assumed as a way to increase system integrity both by increased coverage during normal operations and failover redundancy in the event of a constellation failure. At approximately 21:00 UTC on April 1st the entire GLONASS constellation was disrupted as illegal ephemeris uploaded to each satellite took effect simultaneously. The outage continued for more than 10 hours. While ephemeris were incorrect, pseudoranges were correctly broadcast on both L1 and L2 and carrier phases were not affected; in the best case, GNSS receivers could be expected to continue to track all signals including GLONASS and at the worst to continue to track GPS and other constellations. It became clear to operators of the GeoNet network in New Zealand that the majority of their 79 GLONASS-enabled receivers experienced total tracking failures. Further detailed analysis of data from these and 315 additional GLONASS-enabled stations worldwide showed that receiver tracking behavior was affected for most receiver brands and models, both for GLONASS and GPS. Findings regarding the impacts of the GLONASS outage on receiver behavior will be highlighted. We use data recorded by GLONASS enabled global sites for the days during, preceding and following the outage to evaluate the impact of the outage on tracking and positioning performance. We observe that for some receiver types the onboard receiver autonomous integrity monitoring (RAIM) failed to ignore the incorrect messages, resulting in degraded GLONASS and GPS tracking and in some cases complete tracking failures and significant data loss. In addition, many of the receivers with clock steering enabled showed outliers in their receiver clock bias estimates that also coincided with the outage. Our results show in detail how different brands, configurations, and distributions of receivers were affected to varying extents, but no common factors are apparent. This event shows that many manufacturers

  6. Teachers' Spatial Anxiety Relates to 1st-and 2nd-Graders' Spatial Learning

    ERIC Educational Resources Information Center

    Gunderson, Elizabeth A.; Ramirez, Gerardo; Beilock, Sian L.; Levine, Susan C.

    2013-01-01

    Teachers' anxiety about an academic domain, such as math, can impact students' learning in that domain. We asked whether this relation held in the domain of spatial skill, given the importance of spatial skill for success in math and science and its malleability at a young age. We measured 1st-and 2nd-grade teachers' spatial anxiety…

  7. Educational impact of a clinical anatomy workshop on 1st-year orthopedic and rheumatology fellows in Mexico City.

    PubMed

    Saavedra, M A; Villaseñor-Ovies, P; Harfush, L A; Navarro-Zarza, J E; Canoso, J J; Cruz-Domínguez, P; Vargas, A; Hernández-Díaz, C; Chiapas-Gasca, K; Camacho-Galindo, J; Alvarez-Nemegyei, J; Kalish, R A

    2016-05-01

    We aim to study the educational impact of a clinical anatomy workshop in 1st-year orthopedic and rheumatology fellows. First-year rheumatology fellows (N = 17) and a convenience sample of 1st-year orthopedic fellows (N = 14) from Mexico City in the 9th month of training participated in the study. The pre- and the post- workshop tests included the same 20 questions that had to be answered by identification or demonstration of relevant anatomical items. The questions, arranged by anatomical regions, were asked in five dynamic stations. Overall, the 31 participants showed an increase of correct answers, from a median of 6 (range 1 to 12) in the pre-workshop test, to a median of 14 (range 7 to 19) in the post-workshop test. In the pre-workshop test, the correct median answers were 7 (range 2 to 12) in the orthopedic fellows and 5 (range 1 to 10) in the rheumatology fellows (p = 0.297). Corresponding scores in the post-workshop were 15 (range 10 to 19) and 12 (range 7 to 18) (p = 0.026) showing a significant difference favoring the orthopedic group. Our clinical anatomy workshop was efficacious, in the short term, as a teaching instrument for 1st-year orthopedic and rheumatology fellows. The post-workshop scores, although significantly improved in both groups, particularly in the orthopedic fellows, were still suboptimal. Further refinements of our workshop might yield better results.

  8. Gene-Environment Interaction Effects on the Development of Immune Responses in the 1st Year of Life

    PubMed Central

    Hoffjan, Sabine; Nicolae, Dan; Ostrovnaya, Irina; Roberg, Kathy; Evans, Michael; Mirel, Daniel B.; Steiner, Lori; Walker, Karen; Shult, Peter; Gangnon, Ronald E.; Gern, James E.; Martinez, Fernando D.; Lemanske, Robert F.; Ober, Carole

    2005-01-01

    Asthma is a common disease that results from both genetic and environmental risk factors. Children attending day care in the 1st year of life have lower risks for developing asthma, although the mechanism for this “day care” effect is largely unknown. We investigated the interactions between day care exposure in the 1st 6 mo of life and genotypes for 72 polymorphisms at 45 candidate loci and their effects on cytokine response profiles and on the development of atopic phenotypes in the 1st year of life in the Childhood Onset of Asthma (COAST) cohort of children. Six interactions (at four polymorphisms in three loci) with “day care” that had an effect on early-life immune phenotypes were significant at P<.001. The estimated false-discovery rate was 33%, indicating that an estimated four P values correspond to true associations. Moreover, the “day care” effect at some loci was accounted for by the increased number of viral infections among COAST children attending day care, whereas interactions at other loci were independent of the number of viral infections, indicating the presence of additional risk factors associated with day care environment. This study identified significant gene-environment interactions influencing the early patterning of the immune system and the subsequent development of asthma and highlights the importance of considering environmental risk factors in genetic analyses. PMID:15726497

  9. [Functional aspects of pelvic floor surgery].

    PubMed

    Wagenlehner, F M E; Gunnemann, A; Liedl, B; Weidner, W

    2009-11-01

    Pelvic floor dysfunctions are frequently seen in females. The human pelvic floor is a complex structure and heavily stressed throughout female life. Recent findings in the functional anatomy of the pelvic floor have led to a much better understand-ing, on the basis of which enormous improvements in the therapeutic options have arisen. The pelvic floor activity is regulated by three main muscular forces that are responsible for vaginal tension and suspension of the pelvic floor -organs, bladder and rectum. For different reasons laxity in the vagina or its supporting ligaments as a result of altered connective tissue can distort this functional anatomy. A variety of symptoms can derive from these pelvic floor dysfunctions, such as urinary urge and stress incontinence, abnormal bladder emptying, faecal incontinence, obstructive bowel disease syndrome and pelvic pain. Pelvic floor reconstruction is nowadays driven by the concept that in the case of pelvic floor symptoms restoration of the anatomy will translate into restoration of the physiology and ultimately improve the patients' symptoms. The exact surgical reconstruction of the anatomy is there-fore almost exclusively focused on the restoration of the lax pelvic floor ligaments. An exact identification of the anatomic lesions preoperatively is eminently necessary, to allow for an exact anatomic reconstruction with respect to the muscular forces of the pelvic floor.

  10. Scaling on a limestone flooring

    NASA Astrophysics Data System (ADS)

    Carmona-Quiroga, P. M.; Blanco-Varela, M. T.; Martínez-Ramírez, S.

    2012-04-01

    Natural stone can be use on nearly every surface, inside and outside buildings, but decay is more commonly reported from the ones exposed to outdoor aggressively conditions. This study instead, is an example of limestone weathering of uncertain origin in the interior of a residential building. The stone, used as flooring, started to exhibit loss of material in the form of scaling. These damages were observed before the building, localized in the South of Spain (Málaga), was inhabited. Moreover, according to the company the limestone satisfies the following European standards UNE-EN 1341: 2002, UNE-EN 1343: 2003; UNE-EN 12058: 2004 for floorings. Under these circumstances the main objective of this study was to assess the causes of this phenomenon. For this reason the composition of the mortar was determined and the stone was characterized from a mineralogical and petrological point of view. The last material, which is a fossiliferous limestone from Egypt with natural fissure lines, is mainly composed of calcite, being quartz, kaolinite and apatite minor phases. Moreover, under different spectroscopic and microscopic techniques (FTIR, micro-Raman, SEM-EDX, etc) samples of the weathered, taken directly from the buildings, and unweathered limestone tiles were examined and a new mineralogical phase, trona, was identified at scaled areas which are connected with the natural veins of the stone. In fact, through BSE-mapping the presence of sodium has been detected in these veins. This soluble sodium carbonate would was dissolved in the natural waters from which limestone was precipitated and would migrate with the ascendant capilar humidity and crystallized near the surface of the stone starting the scaling phenomenon which in historic masonry could be very damaging. Therefore, the weathering of the limestone would be related with the hygroscopic behaviour of this salt, but not with the constructive methods used. This makes the limestone unable to be used on restoration

  11. PREFACE: PAGES 1st Young Scientists Meeting (YSM) - 'Retrospective views on our planet's future'

    NASA Astrophysics Data System (ADS)

    Margrethe Basse, Ellen

    2010-03-01

    more recent pollution. The concept and format of the 1st PAGES YSM worked very well, and

  12. National Congress on Rural Education Proceedings (1st, Traverse City, Michigan, October 11, 1992).

    ERIC Educational Resources Information Center

    Gregory, Leonard, Comp.

    The first National Congress on Rural Education, organized and conducted in conjunction with the 84th annual convention of the National Rural Education Association, convened an assembly of 458 advocates of rural education which came together to analyze common problems that tend to disaffect education in rural America and to plan corrective action.…

  13. Refinishing contamination floors in Spent Nuclear Fuels storage basins

    SciTech Connect

    Huang, F.F.; Moore, F.W.

    1997-07-11

    The floors of the K Basins at the Hanford Site are refinished to make decontamination easier if spills occur as the spent nuclear fuel (SNF) is being unloaded from the basins for shipment to dry storage. Without removing the contaminated existing coating, the basin floors are to be coated with an epoxy coating material selected on the basis of the results of field tests of several paint products. The floor refinishing activities must be reviewed by a management review board to ensure that work can be performed in a controlled manner. Major documents prepared for management board review include a report on maintaining radiation exposure as low as reasonably achievable, a waste management plan, and reports on hazard classification and unreviewed safety questions. To protect personnel working in the radiation zone, Operational Health Physics prescribed the required minimum protective methods and devices in the radiological work permit. Also, industrial hygiene safety must be analyzed to establish respirator requirements for persons working in the basins. The procedure and requirements for the refinishing work are detailed in a work package approved by all safety engineers. After the refinishing work is completed, waste materials generated from the refinishing work must be disposed of according to the waste management plan.

  14. Crash Tests of Protective Airplane Floors

    NASA Technical Reports Server (NTRS)

    Carden, H. D.

    1986-01-01

    Energy-absorbing floors reduce structural buckling and impact forces on occupants. 56-page report discusses crash tests of energy-absorbing aircraft floors. Describes test facility and procedures; airplanes, structural modifications, and seats; crash dynamics; floor and seat behavior; and responses of anthropometric dummies seated in airplanes. Also presents plots of accelerations, photographs and diagrams of test facility, and photographs and drawings of airplanes before, during, and after testing.

  15. STATISTICAL ANALYSIS OF TANK 18F FLOOR SAMPLE RESULTS

    SciTech Connect

    Harris, S.

    2010-09-02

    Representative sampling has been completed for characterization of the residual material on the floor of Tank 18F as per the statistical sampling plan developed by Shine [1]. Samples from eight locations have been obtained from the tank floor and two of the samples were archived as a contingency. Six samples, referred to in this report as the current scrape samples, have been submitted to and analyzed by SRNL [2]. This report contains the statistical analysis of the floor sample analytical results to determine if further data are needed to reduce uncertainty. Included are comparisons with the prior Mantis samples results [3] to determine if they can be pooled with the current scrape samples to estimate the upper 95% confidence limits (UCL{sub 95%}) for concentration. Statistical analysis revealed that the Mantis and current scrape sample results are not compatible. Therefore, the Mantis sample results were not used to support the quantification of analytes in the residual material. Significant spatial variability among the current sample results was not found. Constituent concentrations were similar between the North and South hemispheres as well as between the inner and outer regions of the tank floor. The current scrape sample results from all six samples fall within their 3-sigma limits. In view of the results from numerous statistical tests, the data were pooled from all six current scrape samples. As such, an adequate sample size was provided for quantification of the residual material on the floor of Tank 18F. The uncertainty is quantified in this report by an upper 95% confidence limit (UCL{sub 95%}) on each analyte concentration. The uncertainty in analyte concentration was calculated as a function of the number of samples, the average, and the standard deviation of the analytical results. The UCL{sub 95%} was based entirely on the six current scrape sample results (each averaged across three analytical determinations).

  16. STATISTICAL ANALYSIS OF TANK 19F FLOOR SAMPLE RESULTS

    SciTech Connect

    Harris, S.

    2010-09-02

    Representative sampling has been completed for characterization of the residual material on the floor of Tank 19F as per the statistical sampling plan developed by Harris and Shine. Samples from eight locations have been obtained from the tank floor and two of the samples were archived as a contingency. Six samples, referred to in this report as the current scrape samples, have been submitted to and analyzed by SRNL. This report contains the statistical analysis of the floor sample analytical results to determine if further data are needed to reduce uncertainty. Included are comparisons with the prior Mantis samples results to determine if they can be pooled with the current scrape samples to estimate the upper 95% confidence limits (UCL95%) for concentration. Statistical analysis revealed that the Mantis and current scrape sample results are not compatible. Therefore, the Mantis sample results were not used to support the quantification of analytes in the residual material. Significant spatial variability among the current scrape sample results was not found. Constituent concentrations were similar between the North and South hemispheres as well as between the inner and outer regions of the tank floor. The current scrape sample results from all six samples fall within their 3-sigma limits. In view of the results from numerous statistical tests, the data were pooled from all six current scrape samples. As such, an adequate sample size was provided for quantification of the residual material on the floor of Tank 19F. The uncertainty is quantified in this report by an UCL95% on each analyte concentration. The uncertainty in analyte concentration was calculated as a function of the number of samples, the average, and the standard deviation of the analytical results. The UCL95% was based entirely on the six current scrape sample results (each averaged across three analytical determinations).

  17. PREFACE: 1st Nano-IBCT Conference 2011 - Radiation Damage of Biomolecular Systems: Nanoscale Insights into Ion Beam Cancer Therapy

    NASA Astrophysics Data System (ADS)

    Huber, Bernd A.; Malot, Christiane; Domaracka, Alicja; Solov'yov, Andrey V.

    2012-07-01

    The 1st Nano-IBCT Conference entitled 'Radiation Damage in Biomolecular Systems: Nanoscale Insights into Ion Beam Cancer Therapy' was held in Caen, France, in October 2011. The Meeting was organised in the framework of the COST Action MP1002 (Nano-IBCT) which was launched in December 2010 (http://fias.uni-frankfurt.de/nano-ibct). This action aims to promote the understanding of mechanisms and processes underlying the radiation damage of biomolecular systems at the molecular and nanoscopic level and to use the findings to improve the strategy of Ion Beam Cancer Therapy. In the hope of achieving this, participants from different disciplines were invited to represent the fields of physics, biology, medicine and chemistry, and also included those from industry and the operators of hadron therapy centres. Ion beam therapy offers the possibility of excellent dose localization for treatment of malignant tumours, minimizing radiation damage in normal healthy tissue, while maximizing cell killing within the tumour. Several ion beam cancer therapy clinical centres are now operating in Europe and elsewhere. However, the full potential of such therapy can only be exploited by better understanding the physical, chemical and biological mechanisms that lead to cell death under ion irradiation. Considering a range of spatio-temporal scales, the proposed action therefore aims to combine the unique experimental and theoretical expertise available within Europe to acquire greater insight at the nanoscopic and molecular level into radiation damage induced by ion impact. Success in this endeavour will be both an important scientific breakthrough and give great impetus to the practical improvement of this innovative therapeutic technique. Ion therapy potentially provides an important advance in cancer therapy and the COST action MP1002 will be very significant in ensuring Europe's leadership in this field, providing the scientific background, required data and mechanistic insight which

  18. Pelvic floor muscle rehabilitation using biofeedback.

    PubMed

    Newman, Diane K

    2014-01-01

    Pelvic floor muscle exercises have been recommended for urinary incontinence since first described by obstetrician gynecologist Dr. Arnold Kegel more than six decades ago. These exercises are performed to strengthen pelvic floor muscles, provide urethral support to prevent urine leakage, and suppress urgency. In clinical urology practice, expert clinicians also teach patients how to relax the muscle to improve bladder emptying and relieve pelvic pain caused by muscle spasm. When treating lower urinary tract symptoms, an exercise training program combined with biofeedback therapy has been recommended as first-line treatment. This article provides clinical application of pelvic floor muscle rehabilitation using biofeedback as a technique to enhance pelvic floor muscle training.

  19. 17. 4th floor roof, view south, 4th and 5th floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. 4th floor roof, view south, 4th and 5th floor setback to left and atrium structure to right - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  20. Assessment of the orbits from the 1st IGS reprocessing campaign (Invited)

    NASA Astrophysics Data System (ADS)

    Griffiths, J.; Gendt, G.; Nischan, T.; Ray, J.

    2009-12-01

    All eight Finals Analysis Centers (ACs) of the International GNSS Service (IGS), plus three allied groups, for a total of eleven contributing ACs, are using the latest models and methodology to reanalyze the history of Global Positioning System (GPS) data collected since 1994 by a global network of tracking stations. The solutions from the contributing ACs will be used to form a fully consistent, long-term set of official IGS products, specifically Earth orientation parameters, clocks, orbits and station coordinates. This is the first such reprocessing campaign by the IGS, which is expected to be complete by mid-November, 2009. A second reprocessing campaign will follow as further updates and improvements are made to the models and methodology. This paper, then, focuses on assessing the reliability and quality of the combined orbits from this first campaign, and making recommendations to be considered in preparation for the second campaign. In our preliminary assessment of the reliability of the combined orbits, we have examined the reprocessed AC orbit estimates from the 1025 days of results until the end of 2007. Each daily AC satellite ephemeris for each pair of consecutive days has been fitted to the extended CODE orbit model, extrapolated to the mid-point epoch between the days, and the geocentric satellite position differences computed to give time series of orbit repeatabilities. Occasional data gaps have been filled by linear interpolation, FFT power spectra computed, and the spectra stacked over the full GPS constellation and lightly smoothed. This preliminary analysis of the midnight discontinuities reveals considerable diversity among AC orbits. Several show broad semi-annual and fortnightly spectral peaks, as well as even harmonics of the GPS draconitic year (1.040 cpy) with varying amplitudes. High-frequency white noise floors can be detected in most AC orbit spectra, with an average sigma of 14 mm and larger. The statistics from preliminary orbit

  1. Eastern Floor of Holden Crater

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 15 April 2002) The Science Today's THEMIS image covers territory on the eastern floor of Holden Crater, which is located in region of the southern hemisphere called Noachis Terra. Holden Crater is 154 km in diameter and named after American Astronomer Edward Holden (1846-1914). This image shows a mottled surface with channels, hills, ridges and impact craters. The largest crater seen in this image is 5 km in diameter. This crater has gullies and what appears to be horizontal layers in its walls. The Story With its beautiful symmetry and gullies radially streaming down to the floor, the dominant crater in this image is an impressive focal point. Yet, it is really just a small crater within a much larger one named Holden Crater. Take a look at the context image to the right to see just how much bigger Holden Crater is. Then come back to the image strip that shows the mottled surface of Holden Crater's eastern floor in greater detail, and count how many hills, ridges, channels, and small impact craters can be seen. No perfectly smooth terrain abounds there, that's for sure. The textured terrain of Holden Crater has been particularly intriguing ever since the Mars Orbital Camera on the Mars Global Surveyor spacecraft found evidence of sedimentary rock layers there that might have formed in lakes or shallow seas in Mars' ancient past. This finding suggests that Mars may have been more like Earth long ago, with water on its surface. Holden Crater might even have held a lake long ago. No one knows for sure, but it's an exciting possibility. Why? If water was once on the surface of Mars long enough to form sedimentary materials, maybe it was there long enough for microbial life to have developed too. (Life as we know it just isn't possible without the long-term presence of liquid water.) The question of life on the red planet is certainly tantalizing, but scientists will need to engage in a huge amount of further investigation to begin to know the answer. That

  2. Report on: "The 1st Workshop on National Immunization Programs and Vaccine Coverage in ASEAN Countries, April 30, 2015, Pattaya, Thailand".

    PubMed

    Hattasingh, Weerawan; Pengsaa, Krisana; Thisyakorn, Usa

    2016-03-01

    The 1st Workshop on National Immunization Programs and Vaccine Coverage in Association of Southeast Asian Nations (ASEAN) Countries Group (WNIPVC-ASEAN) held a meeting on April 30, 2015, Pattaya, Thailand under the auspices of the Pediatric Infectious Diseases Society and the World Health Organization (WHO). Reports on the current status and initiatives of the national immunization program (NIP) in each ASEAN countries that attended were presented. These reports along with survey data collected from ministries of health in ASEAN countries NIPs demonstrate that good progress has been made toward the goal of the Global Vaccine Action Plan (GVAP). However, some ASEAN countries have fragile health care systems that still have insufficient vaccine coverage of some basic EPI antigens. Most ASEAN countries still do not have national coverage of some new and underused vaccines, and raising funds for the expansion of NIPs is challenging. Also, there is insufficient research into disease burden of vaccine preventable diseases and surveillance. Health care workers must advocate NIPs to government policy makers and other stakeholders as well as improve research and surveillance to achieve the goals of the GVAP.

  3. 16. THIRD FLOOR BLDG. 28A, DETAIL CUTOUT IN FLOOR FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. THIRD FLOOR BLDG. 28A, DETAIL CUTOUT IN FLOOR FOR WOOD BLOCK FLOORING LOOKING EAST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  4. [Functional rehabilitation of the pelvic floor].

    PubMed

    Minschaert, M

    2003-09-01

    Pelvic floor revalidation is devoted to conserve perineal functions as statics, urinary continence and sexual harmony. The therapeutics includes preventive and curative actions, and is based upon muscular and neuromuscular properties of pelvic floor. The different steps are: information, local muscular work, behavioral education, biofeedback, functional electrostimulation, intraabdominal pressure control. The therapeutics is only continued if clinical improvement is demonstrated after 10 sessions.

  5. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  6. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  7. Floor Time: Rethinking Play in the Classroom

    ERIC Educational Resources Information Center

    Kordt-Thomas, Chad; Lee, Ilene M.

    2006-01-01

    Floor time is a play-based, one-to-one approach to helping children develop relationships, language, and thinking. Developed by child psychiatrist Stanley Greenspan, floor time is helpful not only for children with special needs but also for children who are developing typically. It can be used by teachers, caregivers, and families in brief…

  8. Learning4Life on the Exhibit Floor

    ERIC Educational Resources Information Center

    Sullivan, Margaret

    2009-01-01

    The exhibit floor is a wealth of knowledge. One can read, view, and listen to information presented in many formats. Somewhere on the exhibit floor there are experts on every topic, ready and waiting for one's questions. But like any research topic, frequently a structured search is required to find the best answers. This article discusses how to…

  9. 36 CFR 910.60 - Gross floor area.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Gross floor area. 910.60... DEVELOPMENT AREA Glossary of Terms § 910.60 Gross floor area. Gross floor area is defined in section 1201... of the several floors from the ground floor up of all buildings of a development occurring on a...

  10. [Analysis of reconstruction procedures for defects of the mouth floor. Report of 96 cases].

    PubMed

    Michelet, V; Duroux, S; Majoufre, C; Caix, P; Siberchicot, F

    1996-12-01

    The aim of this study was to assess the reconstruction of floor of the mouth defects after cancer surgery. The medical records of 140 patients treated between January 1st, 1987 and December 31st, 1995 were reviewed. Ninety-six patients had primary reconstruction: there were 82 cutaneous or osteomyocutaneous flaps and 14 microsurgical transfers. Among these patients 15 had titanium mandibular reconstruction plates. The reconstruction procedures and postoperative follow-up were evaluated. Healing by first intention is appropriate for superficial soft tissue defects. The nasolabial flap is used only for small mucosal defects. A forearm flap should be the first choice treatment for large soft tissue defects owing to its plasticity and reliable vessels. Segmental mandibular resections often imply mandibular reconstruction. Titanium plates may be used alone or with a cutaneous flap. Tolerance of plates after radiotherapy is very good and they are an effective method of reconstruction for fragile patients. PMID:9768172

  11. Male pelvic floor: history and update.

    PubMed

    Dorey, Grace

    2005-08-01

    Our understanding of the male pelvic floor has evolved over more than 2,000 years. Gradually medical science has sought to dispel ancient myths and untruths. The male pelvic floor has many diverse functions. Importantly, it helps to support the abdominal contents, maintains urinary and fecal continence, and plays a major role in gaining and maintaining penile erection. Weakness of the male pelvic floor muscles may cause urinary and fecal incontinence and erectile dysfunction. Function may be restored in each of these areas by a comprehensive pelvic floor muscle training program. Spasm of the pelvic floor muscles may produce pain and require relaxation techniques. Additional research is needed to add further evidence to our knowledge base.

  12. BMI differences in 1st and 2nd generation immigrants of Asian and European origin to Australia.

    PubMed

    Hauck, Katharina; Hollingsworth, Bruce; Morgan, Lawrie

    2011-01-01

    We estimate assimilation of immigrants' body mass index (BMI) to the host population of Australia over one generation, conducting separate analyses for immigrants from 7 regions of Europe and Asia. We use quantile regressions to allow for differing impact of generational status across 19 quantiles of BMI from under-weight to morbidly obese individuals. We find that 1st generation South European immigrants have higher, and South and East Asian immigrants have lower BMI than Australians, but have assimilated to the BMI of their hosts in the 2nd generation. There are no or only small BMI differences between Australians and 1st and 2nd generation immigrants from East Europe, North-West Europe, Middle East and Pacific regions. We conclude that both upward and downward assimilation in some immigrant groups is most likely caused by factors which can change over one generation (such as acculturation), and not factors which would take longer to change (such as genetics). Our results suggest that public health policies targeting the lifestyles of well educated Asian immigrants may be effective in preventing BMI increase in this subgroup.

  13. Attitudes towards General Practice: a comparative cross-sectional survey of 1st and 5th year medical students

    PubMed Central

    Kruschinski, Carsten; Wiese, Birgitt; Hummers-Pradier, Eva

    2012-01-01

    Objective: Positive attitudes towards General Practice can be understood as a prerequisite for becoming a General Practitioner (GP) and for collaboration with GPs later on. This study aimed to assess attitudes of medical students at the beginning and the end of medical school. Methods: A total of 160 1st year students at Hannover Medical School were surveyed. Their attitudes were compared to those of 287 5th year students. Descriptive, bi- and multivariate analyses were performed to investigate influences of year of study and gender. Results: Year of study and gender both were associated with the attitudes towards General Practice. The interest in General Practice and patient-orientation (communication, care of older patients with chronic diseases) was higher in 1st year students compared to more advanced students. Female students valued such requirements more than male students, the differences in attitudes between the years of study being more pronounced in male students. Conclusion: Despite some limitations caused by the cross-sectional design, the attitudes towards General Practice competencies changed to their disadvantage during medical school. This suggests a formative influence of the strategies used in medical education. Educational strategies, however, could be used to bring about a change of attitudes in the other direction. PMID:23255966

  14. Ultrasonic Inspection Of The LTAB Floor

    SciTech Connect

    Thomas, G

    2001-07-31

    The National Ignition Facility's (NIF) floor is damaged by transporter operations. Two basic operations, rotating the wheels in place and traversing the floor numerous times can cause failure in the grout layer. The floor is composed of top wear surface (Stonhard) and an osmotic grout layer on top of concrete, Fig. 1. An ultrasonic technique was implemented to assess the condition of the floor as part of a study to determine the damage mechanisms. The study considered damage scenarios and ways to avoid the damage. A possible solution is to install thin steel plates where the transporter traverses on the floor. These tests were conducted with a fully loaded transporter that applies up to 1300 psi loads to the floor. A contact ultrasonic technique evaluated the condition of the grout layer in NIF's floor. Figure 1 displays the configuration of the ultrasonic transducer on the floor. We inspected the floor after wheel rotation damage and after wheel traversal damage. Figure 2a and 2b are photographs of the portable ultrasonic system and data acquisition. We acquired ultrasonic signals in a known pristine area and a damaged area to calibrate the inspection. Figure 3 is a plot of the typical ultrasonic response from an undamaged area (black) overlapped with a signal (red) from a damaged area. The damage area data was acquired at a location next to a hole in the floor that was caused by the transporter. Five megahertz pulses are propagated from the transducer and through a Plexiglas buffer rod into the floor. The ultrasonic pulse reflects from each discontinuity in the floor. The ultrasonic signal reflects from the top surface, the Stonhard-to-grout interface, and the grout to concrete interface. We expect to see reflections from each of these interfaces in an undamaged floor. If the grout layer pulverizes then the high frequency signal cannot traverse the layer and the grout to concrete interface signal will decrease or vanish. The more damage to the grout the more the

  15. 41. Ground level photograph of two floors of skeleton complete ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. Ground level photograph of two floors of skeleton complete with 3rd and 4th floors being started,upper floors of county bldg visible - Chicago City Hall, 121 North LaSalle Street, Chicago, Cook County, IL

  16. Typical Newel Post, First Floor Newel Post, Typical Baluster, Typical ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Typical Newel Post, First Floor Newel Post, Typical Baluster, Typical Nosing, First Floor Stringer Profile, Second Floor Stringer Profile - National Home for Disabled Volunteer Soldiers - Battle Mountain Sanitarium, Treasurer's Quarters, 500 North Fifth Street, Hot Springs, Fall River County, SD

  17. Pelvic floor and sexual male dysfunction.

    PubMed

    Pischedda, Antonella; Fusco, Ferdinando; Curreli, Andrea; Grimaldi, Giovanni; Pirozzi Farina, Furio

    2013-04-19

    The pelvic floor is a complex multifunctional structure that corresponds to the genito-urinary-anal area and consists of muscle and connective tissue. It supports the urinary, fecal, sexual and reproductive functions and pelvic statics. The symptoms caused by pelvic floor dysfunction often affect the quality of life of those who are afflicted, worsening significantly more aspects of daily life. In fact, in addition to providing support to the pelvic organs, the deep floor muscles support urinary continence and intestinal emptying whereas the superficial floor muscles are involved in the mechanism of erection and ejaculation. So, conditions of muscle hypotonia or hypertonicity may affect the efficiency of the pelvic floor, altering both the functionality of the deep and superficial floor muscles. In this evolution of knowledge it is possible imagine how the rehabilitation techniques of pelvic floor muscles, if altered and able to support a voiding or evacuative or sexual dysfunction, may have a role in improving the health and the quality of life.

  18. Dunes in a Crater Floor

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    Released 6 August 2003

    This image shows the floor of a crater just north of the Argyre basin in the southern hemisphere. Dark dunes have been pushed up against the northeastern interior rim of the crater, indicating that the prevailing winds blow from the southwest.

    Image information: VIS instrument. Latitude -35.7, Longitude 324.1 East (35.9 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  19. Ultrasound Imaging of the Pelvic Floor.

    PubMed

    Stone, Daniel E; Quiroz, Lieschen H

    2016-03-01

    This article discusses the background and appraisal of endoluminal ultrasound of the pelvic floor. It provides a detailed anatomic assessment of the muscles and surrounding organs of the pelvic floor. Different anatomic variability and pathology, such as prolapse, fecal incontinence, urinary incontinence, vaginal wall cysts, synthetic implanted material, and pelvic pain, are easily assessed with endoluminal vaginal ultrasound. With pelvic organ prolapse in particular, not only is the prolapse itself seen but the underlying cause related to the anatomic and functional abnormalities of the pelvic floor muscle structures are also visualized.

  20. 15. Photographic copy of construction plan (No 291) dated February ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Photographic copy of construction plan (No 29-1) dated February 25, 1964 on file at the Department of Veterans Affairs Dwight D. Eisenhower Medical Center Engineering Services. First floor plan (library) and basement floor plan prior to partitions - National Home for Disabled Volunteer Soldiers Western Branch, Ward Memorial Building, Franklin Avenue, southeast of Intersection with Rowland Avenue, Leavenworth, Leavenworth County, KS

  1. Impact of volcanic eruptions on the climate of the 1st millennium AD in a comprehensive climate simulation

    NASA Astrophysics Data System (ADS)

    Wagner, Sebastian; Zorita, Eduardo

    2015-04-01

    The climate of the 1st millennium AD shows some remarkable differences compared to the last millennium concerning variation in external forcings. Together with an orbitally induced increased solar insolation during the northern hemisphere summer season and a general lack of strong solar minima, the frequency and intensity of large tropical and extratropical eruptions is decreased. Here we present results of a new climate simulation carried out with the comprehensive Earth System Model MPI-ESM-P forced with variations in orbital, solar, volcanic and greenhouse gas variations and land use changes for the last 2,100 years. The atmospheric model has a horizontal resolution of T63 (approx. 125x125 km) and therefore also allows investigations of regional-to-continental scale climatic phenomena. The volcanic forcing was reconstructed based on a publication by Sigl et al. (2013) using the sulfate records of the NEEM and WAIS ice cores. To obtain information on the aerosol optical depth (AOD) these sulfate records were scaled to an established reconstruction from Crowley and Unterman (2010), which is also a standard forcing in the framework of CMIP5/PMIP3. A comparison between the newly created data set with the Crowley and Unterman dataset reveals that the new reconstruction shows in general weaker intensities, especially of the large tropical outbreaks and fewer northern hemispheric small-to-medium scale eruptions. However, the general pattern in the overlapping period is similar. A hypothesis that can be tested with the simulation is whether the reduced volcanic intensity of the 1st millennium AD contributed to the elevated temperature levels over Europe, evident within a new proxy-based reconstruction. On the other hand, the few but large volcanic eruptions, e.g. the 528 AD event, also induced negative decadal-scale temperature anomalies. Another interesting result of the simulation relates to the 79 AD eruption of the Vesuvius, which caused the collapse of the city of

  2. 56. Photograph of Original Plan (original plans in the possession ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    56. Photograph of Original Plan (original plans in the possession of the Los Angeles Union Passenger Terminal Corporation) BAGGAGE AND EXPRESS UNIT, MAIN FLOOR AND BOILER ROOM PLANS, SECTIONS IV-V - Los Angeles Union Passenger Terminal, Tracks & Shed, 800 North Alameda Street, Los Angeles, Los Angeles County, CA

  3. 55. Photograph of Original Plan (original plans in the possession ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    55. Photograph of Original Plan (original plans in the possession of the Los Angeles Union Passenger Terminal Corporation) BAGGAGE AND EXPRESS UNITY, STREET LEVEL FLOOR PLAN, SECTION III - Los Angeles Union Passenger Terminal, Tracks & Shed, 800 North Alameda Street, Los Angeles, Los Angeles County, CA

  4. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... composite material diagonally scored one-half inch deep may be used on iron decks instead of wooden flooring... aft with flat side down, and so placed as to provide in-between spaces of 12, 14, 26, and 14...

  5. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... composite material diagonally scored one-half inch deep may be used on iron decks instead of wooden flooring... aft with flat side down, and so placed as to provide in-between spaces of 12, 14, 26, and 14...

  6. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... composite material diagonally scored one-half inch deep may be used on iron decks instead of wooden flooring... aft with flat side down, and so placed as to provide in-between spaces of 12, 14, 26, and 14...

  7. Magnetic Resonance Imaging (MRI): Dynamic Pelvic Floor

    MedlinePlus

    ... a powerful magnetic field, radio waves and a computer to produce detailed pictures of the pelvic floor, ... powerful magnetic field, radio frequency pulses and a computer to produce detailed pictures of organs, soft tissues, ...

  8. Floor Fractured Craters around Syrtis Major, Mars

    NASA Astrophysics Data System (ADS)

    Bamberg, M.; Jaumann, R.; Asche, H.

    2012-04-01

    Craters around Syrtis Major are eroded and/or refilled. Syrtis Major is one of the large Hesperian-aged volcanic regions on Mars. Basaltic deposits originating from nearby Syrtis Major cover the floor of impact craters. In particular some craters exhibit a fractured floor. Floor Fractured Craters can be divided in types. The grade of erosion and the geologic process, which formed the crater, can be different. Type 1: Crater floor affected by pit chains or narrow crevices which are sometimes discontinuous. Type 2: More developed and dense networks of crevices as type 1. Crevices are wide and deep enough to be detected. A circular moat starts to develop as crevices concentrate along the rim. Type 3: Mainly distinguished from type 2 by the presence of a fully developed circular moat. The flat central part is divided into several blocks by crevices. Type 4: They show also a continuous moat along the rim but the central part consists of many flat-top blocks and small conical mounds. Type 5: Crater floor has many mounds of irregular sizes, but the flattop blocks are absent. It should be noted that the knobby surface shows typical characteristics of chaotic terrains and could be alternatively classified as such. Type 6: Crater without a circular moat, crevices are not fully developed, flat-top blocks are present. Fractured floor could have been reshaped through geologic processes. Floor fractured craters can be found in three different areas. The first area is located in the south-eastern part of Syrtis Major, bordering to the highlands. Volcanic features like lava flow fronts, lava flows and wrinkle ridges dominate this region. The crater floor is separated in sharp-edged plates and the interior seems to be flooded by basaltic material. The second area is in the north of Syrtis Major and transcend to the chaotic terrain further north. Near the martian dichotomy boundary fluvial activity was the decisive process. The crater rims are highly eroded, channels are cutting

  9. Improving conversion yield of fermentable sugars into fuel ethanol in 1st generation yeast-based production processes.

    PubMed

    Gombert, Andreas K; van Maris, Antonius J A

    2015-06-01

    Current fuel ethanol production using yeasts and starch or sucrose-based feedstocks is referred to as 1st generation (1G) ethanol production. These processes are characterized by the high contribution of sugar prices to the final production costs, by high production volumes, and by low profit margins. In this context, small improvements in the ethanol yield on sugars have a large impact on process economy. Three types of strategies used to achieve this goal are discussed: engineering free-energy conservation, engineering redox-metabolism, and decreasing sugar losses in the process. Whereas the two former strategies lead to decreased biomass and/or glycerol formation, the latter requires increased process and/or yeast robustness.

  10. Plasma properties from the multi-wavelength analysis of the November 1st 2003 CME/shock event

    PubMed Central

    Benna, Carlo; Mancuso, Salvatore; Giordano, Silvio; Gioannini, Lorenzo

    2012-01-01

    The analysis of the spectral properties and dynamic evolution of a CME/shock event observed on November 1st 2003 in white-light by the LASCO coronagraph and in the ultraviolet by the UVCS instrument operating aboard SOHO, has been performed to compute the properties of some important plasma parameters in the middle corona below about 2R⊙. Simultaneous observations obtained with the MLSO/Mk4 white-light coronagraph, providing both the early evolution of the CME expansion in the corona and the pre-shock electron density profile along the CME front, were also used to study this event. By combining the above information with the analysis of the metric type II radio emission detected by ground-based radio spectrographs, we finally derive estimates of the values of the local Alfvén speed and magnetic field strength in the solar corona. PMID:25685432

  11. Side Elevation, End Elevation, Cross Section, 1/2 Roof Plan, 1/2 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Side Elevation, End Elevation, Cross Section, 1/2 Roof Plan, 1/2 Reflected Plan, 1/2 Floor Plan, 1/2 Reflected Plan - Jack's Mill Covered Bridge, Spanning Henderson Creek, Oquawka, Henderson County, IL

  12. [Epidermoid cyst of the mouth floor].

    PubMed

    Sanjuán Rodríguez, S; Morán Penco, J M; Ruiz Orpez, A; Santamaria Ossorio, J I; Berchi García, F J

    2003-07-01

    The epidermoid cysts are frequent during childhood, however mouth floor location are very unusual, because of their more difficult diagnosis and therapeutic approach. We present a 5 years old male, symptoms free until a week before, when his parents noticed a well defined mass in the mouth floor. A physical examination leaded to the diagnosis of possible epidermoid cyst. The tumor was excised through an introral approach. A review of different diagnostic means and surgical management are undertaken.

  13. [Functional rehabilitation of the pelvic floor].

    PubMed

    Minschaert, M

    2003-09-01

    Pelvic floor revalidation is devoted to conserve perineal functions as statics, urinary continence and sexual harmony. The therapeutics includes preventive and curative actions, and is based upon muscular and neuromuscular properties of pelvic floor. The different steps are: information, local muscular work, behavioral education, biofeedback, functional electrostimulation, intraabdominal pressure control. The therapeutics is only continued if clinical improvement is demonstrated after 10 sessions. PMID:14606287

  14. CFD wind tunnel test: Field velocity patterns of wind on a building with a refuge floor

    NASA Astrophysics Data System (ADS)

    Cheng, C. K.; Yuen, K. K.; Lam, K. M.; Lo, S. M.

    2005-10-01

    This paper reports a CFD wind tunnel study of wind patterns on a square-plan building with a refuge floor at its mid-height level. In this study, a technique of using calibrated power law equations of velocity and turbulent intensity applied as the boundary conditions in CFD wind tunnel test is being evaluated by the physical wind tunnel data obtained by the Principal Author with wind blowing perpendicularly on the building without a refuge floor. From the evaluated results, an optimised domain of flow required to produce qualitative agreement between the wind tunnel data and simulated results is proposed in this paper. Simulated results with the evaluated technique are validated by the wind tunnel data obtained by the Principal Author. The results contribute to an understanding of the fundamental behaviour of wind flow in a refuge floor when wind is blowing perpendicularly on the building. Moreover, the results reveal that the designed natural ventilation of a refuge floor may not perform desirably when the wind speed on the level is low. Under this situation, the refuge floor may become unsafe if smoke was dispersed in the leeward side of the building at a level immediately below the refuge floor.

  15. Levels of innate immune factors in preterm and term mothers' breast milk during the 1st month postpartum.

    PubMed

    Trend, Stephanie; Strunk, Tobias; Lloyd, Megan L; Kok, Chooi Heen; Metcalfe, Jessica; Geddes, Donna T; Lai, Ching Tat; Richmond, Peter; Doherty, Dorota A; Simmer, Karen; Currie, Andrew

    2016-04-14

    There is a paucity of data on the effect of preterm birth on the immunological composition of breast milk throughout the different stages of lactation. We aimed to characterise the effects of preterm birth on the levels of immune factors in milk during the 1st month postpartum, to determine whether preterm milk is deficient in antimicrobial factors. Colostrum (days 2-5 postpartum), transitional milk (days 8-12) and mature milk (days 26-30) were collected from mothers of extremely preterm (<28 weeks of gestation, n 15), very preterm (28-<32 weeks of gestation, n 15), moderately preterm (32-<37 weeks of gestation, n 15) and term infants (37-41 weeks of gestation, n 15). Total protein, lactoferrin, secretory IgA, soluble CD14 receptor (sCD14), transforming growth factor-β2 (TGF-β2), α defensin 5 (HD5), β defensins 1 (HBD1) and 2, IL-6, IL-10, IL-13, interferon-γ, TNF-α and lysozyme (LZ) were quantified in milk. We examined the effects of lactation stage, gestational age, volume of milk expressed, mode of delivery, parity and maternal infection on milk immune factor concentrations using repeated-measures regression analysis. The concentrations of all factors except LZ and HD5 decreased over the 1st month postpartum. Extremely preterm mothers had significantly higher concentrations of HBD1 and TGF-β2 in colostrum than term mothers did. After controlling for other variables in regression analyses, preterm birth was associated with higher concentrations of HBD1, LZ and sCD14 in milk samples. In conclusion, preterm breast milk contains significantly higher concentrations of some immune proteins than term breast milk.

  16. Physical therapy for female pelvic floor disorders.

    PubMed

    Bourcier, A P

    1994-08-01

    Non-surgical, non-pharmacological treatment for female pelvic floor dysfunction is represented by rehabilitation in urogynecology. Since Kegel, in 1948, who proposed the concept of functional restoration of the perineal muscles, no specific term has actually been established. Owing to the number of specialists involved in the management of female pelvic floor disorders (such as gynecologists, urologists, coloproctologists, and neurologists) and the different types of health care providers concerned (such as physicians, physical therapists, nurses, and midwives), it is difficult to make the proper choice between 'physical therapy for pelvic floor', 'pelvic floor rehabilitation', 'pelvic muscle re-education', and 'pelvic floor training'. Because muscle re-education is under the control of physical therapists, we have chosen the term of physical therapy for female pelvic floor disorders. Muscle re-education has an important role in the primary treatment of lower urinary tract dysfunction. A multidisciplinary collaboration may be of particular interest, and a thorough evaluation is useful for a proper selection of patients.

  17. ETRA, TRA642. ON BASEMENT FLOOR. IBEAM COLUMNS SUPPORTING CONSOLE FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETRA, TRA-642. ON BASEMENT FLOOR. I-BEAM COLUMNS SUPPORTING CONSOLE FLOOR HAVE BEEN SURROUNDED BY CONCRETE IN RECTANGULAR PILLARS. BASEMENT FLOOR IS BEING PREPARED FOR PLACEMENT OF CONCRETE. ABOVE CEILING IS CONSOLE FLOOR, IN WHICH CUT-OUT HAS PRESERVED SPACE FOR REACTOR AND ITS SHIELDING. CIRCULAR FORM IN REACTOR AREA IS CONCRETE FORMING. NOTE VERTICAL CONDUIT AT INTERVALS AROUND REACTOR PITS. INL NEGATIVE NO. 56-1237. Jack L. Anderson, Photographer, 4/17/1956 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  18. 117. ARAI Shop and maintenance (ARA627) building roof and floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    117. ARA-I Shop and maintenance (ARA-627) building roof and floor plan. Includes room finish and equipment schedule. Norman Engineering Company 961-area/SF-627-A-1. Date: January 1959. Ineel index code no. 068-0627-00-613-102759. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  19. MTR BLOWER AND FAN HOUSE, TRA610. FIRST FLOOR, ROOF AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR BLOWER AND FAN HOUSE, TRA-610. FIRST FLOOR, ROOF AND FOUNDATION PLANS. DOOR SCHEDULE AND LOCATION OF STRUCTURAL STEEL AND HOLLOW METAL DOORS. BLAW-KNOX 3150-810-1, 1/1951. INL INDEX NO. 531-0610-00-098-100688, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  20. 127. ARAII Administrative and technical support building (ARA606) ground floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    127. ARA-II Administrative and technical support building (ARA-606) ground floor plan. Indicates use of rooms for classrooms, offices, and lunch room. C.A. Sundberg and Associates 866-area-ALPR-606-A-2. Date: June 1958. Ineel index code no. 070-0606-00-822-102825. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  1. System design description for the consolidated sludge sampling system for K Basins floor and fuel canisters

    SciTech Connect

    HECHT, S.L.

    1999-02-18

    This System Design Description describes the Consolidated Sludge Sampling System used in the gathering of sludge samples from K Basin floor and fuel canisters. This document provides additional information on the need for the system, the functions and requirements of the systems, the operations of the system, and the general work plan used in its' design and development.

  2. 2. VIEW OF LOWER MILL FLOOR FOUNDATION, SHOWING, LEFT TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. VIEW OF LOWER MILL FLOOR FOUNDATION, SHOWING, LEFT TO RIGHT, EDGE OF MILLING FLOOR, TABLE FLOOR, VANNING FLOOR, LOADING LEVEL, TAILINGS POND IN RIGHT BACKGROUND. VIEW IS LOOKING FROM THE NORTHWEST - Mountain King Gold Mine & Mill, 4.3 Air miles Northwest of Copperopolis, Copperopolis, Calaveras County, CA

  3. Indirect orbital floor fractures: a meta-analysis.

    PubMed

    Gonzalez, Mithra O; Durairaj, Vikram D

    2010-04-01

    Orbit fractures are common in the context of orbital trauma. Fractures of the orbital floor without orbital rim involvement are known as indirect orbital floor fractures, pure internal floor fractures, and orbital blowout fractures. In this paper, we have reported a meta-analysis of orbital floor fractures focusing on indications and timing of surgical repair, outcomes, and complications. PMID:20616920

  4. 24. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING NORTH. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  5. 23. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING WEST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  6. Nasal Floor Elevation with Transcrestal Hydrodynamic Approach Combined with Dental Implant Placement: A Case Report.

    PubMed

    Sentineri, Rosario; Lombardi, Teresa; Celauro, Andrea; Stacchi, Claudio

    2016-01-01

    Severe atrophy of the anterior maxilla represents a major challenge for the clinician when planning an implant-supported rehabilitation. Several surgical options are available for augmenting bone volume in this area, including onlay or interpositional bone grafts, guided bone regeneration, distraction osteogenesis, and nasal floor augmentation. This case report describes a novel approach to nasal floor elevation using ultrasonic instruments to prepare the implant sites followed by transcrestal hydrodynamic nasal mucosa elevation and grafting with a collagenized xenogeneic biomaterial. This minimally invasive technique allowed for vertical augmentation of the atrophic anterior maxilla together with implant placement in a single-stage surgery. PMID:27100805

  7. Evaluation of cage floor systems for production of commercial broilers.

    PubMed

    Akpobome, G O; Fanguy, R C

    1992-02-01

    Flooring materials evaluated consisted of three types of mesh (wire, steel, and plastic), three types of perforated floor (wood, styrofoam, and plastic), and three types of doweling (rigid, rotating, and padded). A solid wood floor with wood shavings litter served as a control. Parameters measured included body weight at 4, 6, and 8 wk and dressed carcass weight. Breast blisters, feather soilage, broken bones, feed consumption, percentage abdominal fat, and mortality rate for each floor type were also evaluated. Birds grown on wire mesh floors experienced a significant reduction in live body weight at 6 and 8 wk of age when compared with all other floor types tested. The remaining experimental floor types were comparable to the litter floor control group when using body weight as the performance criterion. The mesh floors experienced the highest incidence of breast blisters and the padded dowel group experienced the least. Feather soilage was a problem only with the perforated wood and styrofoam floor systems. Abdominal fat did not seem to be related to experimental floor type. The incidence of wing breakage during processing was significantly greater than leg breakage for all floor systems tested. Mortality was only a problem with the birds reared on wire mesh floors. The overall data suggests that a padded dowel floor system can be used to produce cage broilers about 2,500 g in weight without leg or breast damage and that these birds will be equivalent to those currently produced by the industry on a litter floor system.

  8. Synthetic biomaterials for pelvic floor reconstruction.

    PubMed

    Karlovsky, Matthew E; Kushner, Leslie; Badlani, Gopal H

    2005-09-01

    Pelvic organ prolapse and stress urinary incontinence increase with age. The increasing proportion of the aging female population is likely to result in a demand for care of pelvic floor prolapse and incontinence. Experimental evidence of altered connective tissue metabolism may predispose to pelvic floor dysfunction, supporting the use of biomaterials, such as synthetic mesh, to correct pelvic fascial defects. Re-establishing pelvic support and continence calls for a biomaterial to be inert, flexible, and durable and to simultaneously minimize infection and erosion risk. Mesh as a biomaterial has evolved considerably throughout the past half century to the current line that combines ease of use, achieves good outcomes, and minimizes risk. This article explores the biochemical basis for pelvic floor attenuation and reviews various pelvic reconstructive mesh materials, their successes, failures, complications, and management.

  9. Pathophysiology of pelvic floor hypertonic disorders.

    PubMed

    Butrick, Charles W

    2009-09-01

    The pelvic floor represents the neuromuscular unit that provides support and functional control for the pelvic viscera. Its integrity, both anatomic and functional, is the key in some of the basic functions of life: storage of urine and feces, evacuation of urine and feces, support of pelvic organs, and sexual function. When this integrity is compromised, the results lead to many of the problems seen by clinicians. Pelvic floor dysfunction can involve weakness and result in stress incontinence, fecal incontinence, and pelvic organ prolapse. Pelvic floor dysfunction can also involve the development of hypertonic, dysfunctional muscles. This article discusses the pathophysiology of hypertonic disorders that often result in elimination problems, chronic pelvic pain, and bladder disorders that include bladder pain syndromes, retention, and incontinence. The hypertonic disorders are very common and are often not considered in the evaluation and management of patients with these problems.

  10. Frontline nilotinib in patients with chronic myeloid leukemia in chronic phase: results from the European ENEST1st study

    PubMed Central

    Hochhaus, A; Rosti, G; Cross, N C P; Steegmann, J L; le Coutre, P; Ossenkoppele, G; Petrov, L; Masszi, T; Hellmann, A; Griskevicius, L; Wiktor-Jedrzejczak, W; Rea, D; Coriu, D; Brümmendorf, T H; Porkka, K; Saglio, G; Gastl, G; Müller, M C; Schuld, P; Di Matteo, P; Pellegrino, A; Dezzani, L; Mahon, F-X; Baccarani, M; Giles, F J

    2016-01-01

    The Evaluating Nilotinib Efficacy and Safety in Clinical Trials as First-Line Treatment (ENEST1st) study included 1089 patients with newly diagnosed chronic myeloid leukemia in chronic phase. The rate of deep molecular response (MR4 (BCR-ABL1⩽0.01% on the International Scale or undetectable BCR-ABL1 with ⩾10 000 ABL1 transcripts)) at 18 months was evaluated as the primary end point, with molecular responses monitored by the European Treatment and Outcome Study network of standardized laboratories. This analysis was conducted after all patients had completed 24 months of study treatment (80.9% of patients) or discontinued early. In patients with typical BCR-ABL1 transcripts and ⩽3 months of prior imatinib therapy, 38.4% (404/1052) achieved MR4 at 18 months. Six patients (0.6%) developed accelerated or blastic phase, and 13 (1.2%) died. The safety profile of nilotinib was consistent with that of previous studies, although the frequencies of some nilotinib-associated adverse events were lower (for example, rash, 21.4%). Ischemic cardiovascular events occurred in 6.0% of patients. Routine monitoring of lipid and glucose levels was not mandated in the protocol. These results support the use of frontline nilotinib, particularly when achievement of a deep molecular response (a prerequisite for attempting treatment-free remission in clinical trials) is a treatment goal. PMID:26437782

  11. Stem Cell Gene Therapy for Fanconi Anemia: Report from the 1st International Fanconi Anemia Gene Therapy Working Group Meeting

    PubMed Central

    Tolar, Jakub; Adair, Jennifer E; Antoniou, Michael; Bartholomae, Cynthia C; Becker, Pamela S; Blazar, Bruce R; Bueren, Juan; Carroll, Thomas; Cavazzana-Calvo, Marina; Clapp, D Wade; Dalgleish, Robert; Galy, Anne; Gaspar, H Bobby; Hanenberg, Helmut; Von Kalle, Christof; Kiem, Hans-Peter; Lindeman, Dirk; Naldini, Luigi; Navarro, Susana; Renella, Raffaele; Rio, Paula; Sevilla, Julián; Schmidt, Manfred; Verhoeyen, Els; Wagner, John E; Williams, David A; Thrasher, Adrian J

    2011-01-01

    Survival rates after allogeneic hematopoietic cell transplantation (HCT) for Fanconi anemia (FA) have increased dramatically since 2000. However, the use of autologous stem cell gene therapy, whereby the patient's own blood stem cells are modified to express the wild-type gene product, could potentially avoid the early and late complications of allogeneic HCT. Over the last decades, gene therapy has experienced a high degree of optimism interrupted by periods of diminished expectation. Optimism stems from recent examples of successful gene correction in several congenital immunodeficiencies, whereas diminished expectations come from the realization that gene therapy will not be free of side effects. The goal of the 1st International Fanconi Anemia Gene Therapy Working Group Meeting was to determine the optimal strategy for moving stem cell gene therapy into clinical trials for individuals with FA. To this end, key investigators examined vector design, transduction method, criteria for large-scale clinical-grade vector manufacture, hematopoietic cell preparation, and eligibility criteria for FA patients most likely to benefit. The report summarizes the roadmap for the development of gene therapy for FA. PMID:21540837

  12. Embryonic development of chicken (Gallus Gallus Domesticus) from 1st to 19th day-ectodermal structures.

    PubMed

    Toledo Fonseca, Erika; De Oliveira Silva, Fernanda Menezes; Alcântara, Dayane; Carvalho Cardoso, Rafael; Luís Franciolli, André; Sarmento, Carlos Alberto Palmeira; Fratini, Paula; José Piantino Ferreira, Antônio; Miglino, Maria Angélica

    2013-12-01

    Birds occupy a prominent place in the Brazilian economy not only in the poultry industry but also as an animal model in many areas of scientific research. Thus the aim of this study was to provide a description of macro and microscopic aspects of the ectoderm-derived structures in chicken embryos / fetuses poultry (Gallus gallus domesticus) from 1st to 19th day of incubation. 40 fertilized eggs, from a strain of domestic chickens, with an incubation period of 2-19 days were subjected to macroscopic description, biometrics, light, and scanning microscopy. All changes observed during the development were described. The nervous system, skin and appendages and organs related to vision and hearing began to be identified, both macro and microscopically, from the second day of incubation. The vesicles from the primitive central nervous system-forebrain, midbrain, and hindbrain-were identified on the third day of incubation. On the sixth day of incubation, there was a clear vascularization of the skin. The optic vesicle was first observed fourth day of development and on the fifth day there was the beginning of the lens formation. Although embryonic development is influenced by animal line as well as external factors such as incubation temperature, this paper provides a chronological description for chicken (Gallus gallus domesticus) during its embryonic development. PMID:24019213

  13. 1st Quarter Transportation Report FY 2015: Radioactive Waste Shipments to and from the Nevada National Security Site (NNSS)

    SciTech Connect

    Gregory, Louis

    2015-02-20

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to and from the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the 1st quarter of Fiscal Year (FY) 2015 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report include minor volumes of non-radioactive classified waste/material that were approved for disposal (non-radioactive classified or nonradioactive classified hazardous). Volume reports showing cubic feet generated using the Low-Level Waste Information System may vary slightly due to rounding conventions for volumetric conversions from cubic meters to cubic feet.

  14. A collaborative study to establish the 1st WHO International Standard for human cytomegalovirus for nucleic acid amplification technology.

    PubMed

    Fryer, Jacqueline F; Heath, Alan B; Minor, Philip D

    2016-07-01

    Variability in the performance of nucleic acid amplification technology (NAT)-based assays presents a significant problem in the diagnosis and management of human cytomegalovirus (HCMV) infections. Here we describe a collaborative study to evaluate the suitability of candidate reference materials to harmonize HCMV viral load measurements in a wide range of NAT assays. Candidate materials comprised lyophilized Merlin virus, liquid Merlin virus, liquid AD169 virus, and purified HCMV Merlin DNA cloned into a bacterial artificial chromosome. Variability in the laboratory mean HCMV concentrations determined for virus samples across the different assays was 2 log10. Variability for the purified DNA sample was higher (>3 log10). The agreement between laboratories was markedly improved when the potencies of the liquid virus samples were expressed relative to the lyophilized virus candidate. In contrast, the agreement between laboratories for the purified DNA sample was not improved. Results indicated the suitability of the lyophilized Merlin virus preparation as the 1st WHO International Standard for HCMV for NAT. It was established in October 2010, with an assigned potency of 5 × 10(6) International Units (IU) (NIBSC code 09/162). It is intended to be used to calibrate secondary references, used in HCMV NAT assays, in IU. PMID:27179913

  15. Embryonic development of chicken (Gallus Gallus Domesticus) from 1st to 19th day-ectodermal structures.

    PubMed

    Toledo Fonseca, Erika; De Oliveira Silva, Fernanda Menezes; Alcântara, Dayane; Carvalho Cardoso, Rafael; Luís Franciolli, André; Sarmento, Carlos Alberto Palmeira; Fratini, Paula; José Piantino Ferreira, Antônio; Miglino, Maria Angélica

    2013-12-01

    Birds occupy a prominent place in the Brazilian economy not only in the poultry industry but also as an animal model in many areas of scientific research. Thus the aim of this study was to provide a description of macro and microscopic aspects of the ectoderm-derived structures in chicken embryos / fetuses poultry (Gallus gallus domesticus) from 1st to 19th day of incubation. 40 fertilized eggs, from a strain of domestic chickens, with an incubation period of 2-19 days were subjected to macroscopic description, biometrics, light, and scanning microscopy. All changes observed during the development were described. The nervous system, skin and appendages and organs related to vision and hearing began to be identified, both macro and microscopically, from the second day of incubation. The vesicles from the primitive central nervous system-forebrain, midbrain, and hindbrain-were identified on the third day of incubation. On the sixth day of incubation, there was a clear vascularization of the skin. The optic vesicle was first observed fourth day of development and on the fifth day there was the beginning of the lens formation. Although embryonic development is influenced by animal line as well as external factors such as incubation temperature, this paper provides a chronological description for chicken (Gallus gallus domesticus) during its embryonic development.

  16. Child gender and weight status moderate the relation of maternal feeding practices to body esteem in 1st grade children.

    PubMed

    Shriver, Lenka H; Hubbs-Tait, Laura; Harrist, Amanda W; Topham, Glade; Page, Melanie

    2015-06-01

    Prevention of body dissatisfaction development is critical for minimizing adverse effects of poor body esteem on eating behaviors, self-esteem, and overall health. Research has examined body esteem and its correlates largely in pre-adolescents and adolescents; however, important questions remain about factors influencing body esteem of younger children. The main purpose of this study was to test moderation by children's gender and weight status of the relation of maternal controlling feeding practices to 1st graders' body esteem. The Body Esteem Scale (BES) and anthropometric measurements were completed during one-on-one child interviews at school. Mothers completed the Child Feeding Questionnaire (restriction, monitoring, concern, self-assessed maternal weight). A total of 410 mother/child dyads (202 girls) participated. Percent of children classified as overweight (BMI-for-age ≥85th) was: girls - 29%; boys - 27%. Gender moderated the relation between restriction and body esteem (β = -.140, p = .05), with maternal restriction predicting body esteem in girls but not boys. The hypothesized three-way interaction among gender, child weight status, and monitoring was confirmed. Monitoring was significantly inversely related to body esteem only for overweight/obese girls (b = -1.630). The moderating influence of gender or gender and weight status on the link between maternal feeding practices and body esteem suggests the importance of body esteem interventions for girls as early as first grade. PMID:25624022

  17. Dynamics of the 1st order phase transition between the nuclear ordered phases of solid 3He

    NASA Astrophysics Data System (ADS)

    Tanaka, Takayoshi; Ito, Hideaki; Sasaki, Yutaka; Mizusaki, Takao

    2005-08-01

    Dynamics of the 1st order phase transition between the U2D2 and the high field phases (HFP) was studied by field-cycling method between these phases by using ultra low temperature magnetic resonance imaging (ULT-MRI). Single Crystal of U2D2 3He was produced at the bottom of compressional cell in superfluid 3He-B at about 0.5 mK. Domain distribution in the U2D2 crystal was examined by ULT-MRI. We have measured the NMR signal intensity to extract the time-evolution of the HFP, after the static magnetic field was swept quickly through the critical field BC1 and was stayed at B=BC1+ΔB. The volume concentration of the U2D2 decreased exponentially in time during the early stage of the phase transition. The rate constant depended positively on ΔB. After the phase transition to the HFP was completed, the static field decreased through BC1 and was fixed at B=BC1-ΔB. The observed rate constant was similar to the value in the opposite direction with identical ΔB. This exponential evolution and ΔB dependence of its rate suggest that the early stage of the phase transition is controlled by the nucleation process.

  18. Synthesis of nanomagnetic fluids and their UV spectrophotometric response with aliphatic organic acids and 1st tier dendrimers

    NASA Astrophysics Data System (ADS)

    Pandya, Shivani R.; Singh, Man

    2016-04-01

    Synthesis of Magnetic nanoparticles were made using coprecipitation method on mixing Fe+3 and Fe+2 in 2:1 ratio with aqueous 8M NaOH which on heating at 90°C for 2 h has yielded 85% magnetic (Fe3O4) nanoparticles (MNPs), characterized by XRD, VSM, SEM, and HR-TEM. The formic acid (FA), oxalic acid (OA) and citric acid (CA), the series of aliphatic organic acids along with Trimesoyl 1, 3, 5 tridimethyl malonate (TTDMM), trimesoyl 1, 3, 5 tridiethyl malonate (TTDEM), trimesoyl 1, 3, 5 tridipropyl malonate (TTDPM), trimesoyl 1, 3, 5 tridibutyl malonate (TTDBM) and trimesoyl 1, 3, 5 tridihexyl malonate (TTDHM) 1st tier dendrimers were used separately for preparing nanomagnetic fluid. From 25 to 150 µM MNPs at an interval of 25 µM were dispersed in 150 µM of acids and dendrimers separately with DMSO. UV-VIS spectrophotometry showed a maximum MNPs dispersion with TTDMM against others and found to be most stable nanomagnetic fluid on account of capping type mechanism of acids.

  19. Child gender and weight status moderate the relation of maternal feeding practices to body esteem in 1st grade children.

    PubMed

    Shriver, Lenka H; Hubbs-Tait, Laura; Harrist, Amanda W; Topham, Glade; Page, Melanie

    2015-06-01

    Prevention of body dissatisfaction development is critical for minimizing adverse effects of poor body esteem on eating behaviors, self-esteem, and overall health. Research has examined body esteem and its correlates largely in pre-adolescents and adolescents; however, important questions remain about factors influencing body esteem of younger children. The main purpose of this study was to test moderation by children's gender and weight status of the relation of maternal controlling feeding practices to 1st graders' body esteem. The Body Esteem Scale (BES) and anthropometric measurements were completed during one-on-one child interviews at school. Mothers completed the Child Feeding Questionnaire (restriction, monitoring, concern, self-assessed maternal weight). A total of 410 mother/child dyads (202 girls) participated. Percent of children classified as overweight (BMI-for-age ≥85th) was: girls - 29%; boys - 27%. Gender moderated the relation between restriction and body esteem (β = -.140, p = .05), with maternal restriction predicting body esteem in girls but not boys. The hypothesized three-way interaction among gender, child weight status, and monitoring was confirmed. Monitoring was significantly inversely related to body esteem only for overweight/obese girls (b = -1.630). The moderating influence of gender or gender and weight status on the link between maternal feeding practices and body esteem suggests the importance of body esteem interventions for girls as early as first grade.

  20. Case Study of Severe Lightning Activity Prior to and During the Outbreak of the June 1st Greenbelt Tornado

    NASA Astrophysics Data System (ADS)

    Barnum, B. H.; Badesha, S.; Shishineh, A.; Adams, N. H.

    2012-12-01

    Surges in lightning activity have been known to be associated with the outbreak of tornado activity. We present a case study of a tornado that touched down near Greenbelt Maryland during the evening of June 1st 2012. Preceding the tornado touchdown, two single point lightning detection systems, a Boltek LD-250 and Vaisala SA20, recorded very high lightning activity rates. An electric field mill (EFM) was also making measurements and recorded large, rapid amplitude oscillations in the vertical electric fields. These electric field oscillations quickly subsided after the initial tornado touchdown. The lightning activity also generated significant RF interference in the S-band dish antenna operated at the Applied Physics Laboratory. It was somewhat surprising that the lightning activity produced enough radiation at these frequencies to cause measured levels of interference which could potentially impair satellite communications. Our interpretation of the EFM data is that intensive vertical forcing and rotation in the thunderstorm during the tornado formation caused the observed rapid electric field oscillations. At the same time, the vertical mixing in the storm caused a surge in lightning activity rates recorded by the Boltek and Vaisala sensors. Following the tornado touchdown, there was a rapid decrease in the lightning rates from the sensors. The EFM oscillations also abruptly ceased and went to a more normal slow-varying pattern typically observed during other thunderstorms without associated tornado activity. It is suggested that a network of field mills could provide realtime warning of imminent tornado activity.

  1. Asbestos release during removal of resilient floor covering materials by recommended work practices of the resilient floor covering institute.

    PubMed

    Williams, Marion Glenn; Crossman, Robert N

    2003-06-01

    The release of asbestos during maintenance and removal of resilient floor covering is of concern to health professionals and many regulators. This study assesses the asbestos levels observed during removal of resilient floor covering products using the "Recommended Work Practices" (1995) of the Resilient Floor Covering Institute or other methods requiring containment (Controls). The 1995 "work practices" require wet removal or dry heat removal but do not require the use of respirators. Wet removals of sheet vinyl/separated backing, 12" x 12" vinyl asbestos tile/mastic, and 9" x 9" asphalt tiles/mastic were conducted and the air was sampled during each procedure. Settled dust samples were collected at the sites of RFCI square tile removal and pieces of each type of tile were broken in a mini-enclosure to evaluate asbestos emissions. Analyses of the air samples collected during the removals showed that the RFCI methods did not produce asbestos counts significantly different from the Control methods requiring containment. Only a small number (0.7%) of fibers and structures, counted and measured by Analytical Transmission Electron Microscopy, would have been counted using the rules for Phase Contrast Microscopy in the 7400 method specified by Occupational Safety and Health Administration regulations. This indicates workers in similar situations without respirators are likely to have unknown exposure levels. A high percentage of these fibers and structures are 5 micrometers or less in length, smaller than 0.5 micrometer in diameter, and are easily inhaled. The RFCI air sample and settled dust data may cause regulators to consider requiring respiratory protection, cleanup procedures, and methods to control asbestos migration. Other areas that might be addressed are clearance levels and their measurement, removal area size, bulk sample analysis by transmission electron microscopy if polarized light microscopy reports less than 1 percent asbestos, better worker exposure

  2. The Impact of Gender-Fair versus Gender-Stereotyped Basal Readers on 1st-Grade Children's Gender Stereotypes: A Natural Experiment

    ERIC Educational Resources Information Center

    Karniol, Rachel; Gal-Disegni, Michal

    2009-01-01

    Israeli 1st-grade children in two different schools in the same neighborhood who were using either a gender-stereotyped or a gender-fair basal reader were asked to judge for a series of female-stereotyped, male-stereotyped, and gender-neutral activities whether they were characteristic of females, of males, or of both. Children using the…

  3. Moving beyond the Lone Scientist: Helping 1st-Grade Students Appreciate the Social Context of Scientific Work Using Stories about Scientists

    ERIC Educational Resources Information Center

    Sharkawy, Azza

    2009-01-01

    While several studies have documented young children's (K-2) stereotypic views of scientists and scientific work, few have examined students' views of the social nature of scientific work and the strategies effective in broadening these views. The purpose of this study is to examine how stories about scientists influence 1st-grade students' views…

  4. Diagnostic Online Assessment of Basic IT Skills in 1st-Year Undergraduates in the Medical Sciences Division, University of Oxford

    ERIC Educational Resources Information Center

    Sieber, Vivien

    2009-01-01

    Attitude, experience and competence (broadly covered by the European Computer Driving Licence syllabus) in information technology (IT) were assessed in 846 1st-year Medical Sciences Division undergraduates (2003-06) at the start of their first term. Online assessments delivered during induction workshops were presented as an opportunity for…

  5. Hybrid distributed Raman amplification combining random fiber laser based 2nd-order and low-noise LD based 1st-order pumping.

    PubMed

    Jia, Xin-Hong; Rao, Yun-Jiang; Yuan, Cheng-Xu; Li, Jin; Yan, Xiao-Dong; Wang, Zi-Nan; Zhang, Wei-Li; Wu, Han; Zhu, Ye-Yu; Peng, Fei

    2013-10-21

    A configuration of hybrid distributed Raman amplification (H-DRA), that is formed by incorporating a random fiber laser (RFL) based 2nd-order pump and a low-noise laser-diode (LD) based 1st-order pump, is proposed in this paper. In comparison to conventional bi-directional 1st-order DRA, the effective noise figure (ENF) is found to be lower by amount of 0 to 4 dB due to the RFL-based 2nd-order pump, depending on the on-off gain, while the low-noise 1st-order Raman pump is used for compensating the worsened signal-to-noise ratio (SNR) in the vicinity towards the far end of the fiber and avoiding the potential nonlinear impact induced by excess injection of pump power and suppressing the pump-signal relative intensity noise (RIN) transfer. As a result, the gain distribution can be optimized along ultra-long fiber link, due to combination of the 2nd-order RFL and low-noise 1st-order pumping, making the transmission distance be extended significantly. We utilized such a configuration to achieve ultra-long-distance distributed sensing based on Brillouin optical time-domain analysis (BOTDA). A repeater-less sensing distance record of up to 154.4 km with 5 m spatial resolution and ~ ± 1.4 °C temperature uncertainty is successfully demonstrated.

  6. THERMAL EVALUATION OF CONTAMINATED LIQUID ONTO CELL FLOORS

    SciTech Connect

    , J

    2009-05-04

    For the Salt Disposition Integration Project (SDIP), postulated events in the new Salt Waste Processing Facility (SWPF) can result in spilling liquids that contain Cs-137 and organics onto cell floors. The parameters of concern are the maximum temperature of the fluid following a spill and the time required for the maximum fluid temperature to be reached. Control volume models of the various process cells have been developed using standard conduction and natural convection relationships. The calculations are performed using the Mathcad modeling software. The results are being used in Consolidated Hazards Analysis Planning (CHAP) to determine the controls that may be needed to mitigate the potential impact of liquids containing Cs-137 and flammable organics that spill onto cell floors. Model development techniques and the ease of making model changes within the Mathcad environment are discussed. The results indicate that certain fluid spills result in overheating of the fluid, but the times to reach steady-state are several hundred hours. The long times allow time for spill clean up without the use of expensive mitigation controls.

  7. Sea Floor off San Diego, California

    USGS Publications Warehouse

    Dartnell, Peter; Gibbons, Helen

    2009-01-01

    Ocean-floor image generated from multibeam-bathymetry data acquired by the U.S. Geological Survey (USGS); Woods Hole Oceanographic Institution; Scripps Institution of Oceanography; California State University, Monterey Bay; and Fugro Pelagos. To learn more, visit http://pubs.usgs.gov/sim/2007/2959/.

  8. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 1192.59...

  9. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 1192.59...

  10. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 1192.59...

  11. Lead exposures from varnished floor refinishing.

    PubMed

    Schirmer, Joseph; Havlena, Jeff; Jacobs, David E; Dixon, Sherry; Ikens, Robert

    2012-01-01

    We evaluated the presence of lead in varnish and factors predicting lead exposure from floor refinishing and inexpensive dust suppression control methods. Lead in varnish, settled dust, and air were measured using XRF, laboratory analysis of scrape and wipe samples, and National Institute for Occupational Safety and Health (NIOSH) Method 7300, respectively, during refinishing (n = 35 homes). Data were analyzed using step-wise logistic regression. Compared with federal standards, no lead in varnish samples exceeded 1.0 mg/cm(2), but 52% exceeded 5000 ppm and 70% of settled dust samples after refinishing exceeded 40 μg/ft(2). Refinishing pre-1930 dwellings or stairs predicted high lead dust on floors. Laboratory analysis of lead in varnish was significantly correlated with airborne lead (r = 0.23, p = 0.014). Adding dust collection bags into drum sanders and HEPA vacuums to edgers and buffers reduced mean floor lead dust by 8293 μg Pb/ft(2) (p<0.05) on floors and reduced most airborne lead exposures to less than 50 μg/m(3). Refinishing varnished surfaces in older housing produces high but controllable lead exposures. PMID:22494405

  12. Seeing Results in Flooring for Schools

    ERIC Educational Resources Information Center

    Simmons, Brian

    2011-01-01

    Operations staffs at education facilities of all sizes are tasked with selecting a hard floor cleaning program that is cost-effective, efficient and highly productive. With an increased focus on the sustainability of an environment, facility managers also must select a program that meets sustainability goals while maintaining a healthful, safe…

  13. Concentric Crater Floor Deposits in Daedalia Planum

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    Released 3 September 2003

    Concentric crater floor deposits in Daedalia Planum. Lava flows appear to be converging on this crater from the northeast as well as on the crater floor. The concentric floor deposits may be the result of exposed and eroded layers of sediment that make up the crater floor.

    Image information: VIS instrument. Latitude -22.3, Longitude 221.5 East (138.5 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  14. Performance Support on the Shop Floor.

    ERIC Educational Resources Information Center

    Kasvi, Jyrki J. J.; Vartiainen, Matti

    2000-01-01

    Discussion of performance support on the shop floor highlights four support systems for assembly lines that incorporate personal computer workstations in local area networks and use multimedia documents. Considers new customer-focused production paradigms; organizational learning; knowledge development; and electronic performance support systems…

  15. Nontraumatic orbital floor fracture after nose blowing.

    PubMed

    Sandhu, Ranjit S; Shah, Akash D

    2016-03-01

    A 40-year-old woman with no history of trauma or prior surgery presented to the emergency department with headache and left eye pain after nose blowing. Noncontrast maxillofacial computed tomography examination revealed an orbital floor fracture that ultimately required surgical repair. There are nontraumatic causes of orbital blowout fractures, and imaging should be obtained irrespective of trauma history. PMID:26973725

  16. 14. Photograph of line drawing in possession of Engineering Plans ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Photograph of line drawing in possession of Engineering Plans and Services Division, Rock Island Arsenal. FIRST FLOOR PLAN, 1920. - Rock Island Arsenal, Building No. 90, East Avenue between North Avenue & King Drive, Rock Island, Rock Island County, IL

  17. 15. Photograph of line drawing in possession of Engineering Plans ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Photograph of line drawing in possession of Engineering Plans and Services Division, Rock Island Arsenal. SECOND FLOOR PLAN, 1920. - Rock Island Arsenal, Building No. 90, East Avenue between North Avenue & King Drive, Rock Island, Rock Island County, IL

  18. 16. Photograph of line drawing in possession of Engineering Plans ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Photograph of line drawing in possession of Engineering Plans and Services Division, Rock Island Arsenal. FIRST FLOOR PLAN, 1936. - Rock Island Arsenal, Building No. 360, Gillespie Avenue between Rodman Avenue & North Avenue, Rock Island, Rock Island County, IL

  19. 17. Photograph of line drawing in possession of Engineering Plans ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. Photograph of line drawing in possession of Engineering Plans and Services Division, Rock Island Arsenal. SECOND FLOOR PLAN, 1936. - Rock Island Arsenal, Building No. 360, Gillespie Avenue between Rodman Avenue & North Avenue, Rock Island, Rock Island County, IL

  20. New approaches for improving the production of the 1st and 2nd generation ethanol by yeast.

    PubMed

    Kurylenko, Olena; Semkiv, Marta; Ruchala, Justyna; Hryniv, Orest; Kshanovska, Barbara; Abbas, Charles; Dmytruk, Kostyantyn; Sibirny, Andriy

    2016-01-01

    Increase in the production of 1st generation ethanol from glucose is possible by the reduction in the production of ethanol co-products, especially biomass. We have developed a method to reduce biomass accumulation of Saccharomyces cerevisiae by the manipulation of the intracellular ATP level due to overexpression of genes of alkaline phosphatase, apyrase or enzymes involved in futile cycles. The strains constructed accumulated up to 10% more ethanol on a cornmeal hydrolysate medium. Similar increase in ethanol accumulation was observed in the mutants resistant to the toxic inhibitors of glycolysis like 3-bromopyruvate and others. Substantial increase in fuel ethanol production will be obtained by the development of new strains of yeasts that ferment sugars of the abundant lignocellulosic feedstocks, especially xylose, a pentose sugar. We have found that xylose can be fermented under elevated temperatures by the thermotolerant yeast, Hansenula polymorpha. We combined protein engineering of the gene coding for xylose reductase (XYL1) along with overexpression of the other two genes responsible for xylose metabolism in yeast (XYL2, XYL3) and the deletion of the global transcriptional activator CAT8, with the selection of mutants defective in utilizing ethanol as a carbon source using the anticancer drug, 3-bromopyruvate. Resulted strains accumulated 20-25 times more ethanol from xylose at the elevated temperature of 45°C with up to 12.5 g L(-1) produced. Increase in ethanol yield and productivity from xylose was also achieved by overexpression of genes coding for the peroxisomal enzymes: transketolase (DAS1) and transaldolase (TAL2), and deletion of the ATG13 gene. PMID:26619255