Science.gov

Sample records for 1st mtp joint

  1. The Effect of Foot Structure on 1st Metatarsophalangeal Joint Flexibility and Hallucal Loading

    PubMed Central

    Rao, Smita; Song, Jinsup; Kraszewski, Andrew; Backus, Sherry; Ellis, Scott J.; Deland, Jonathan T.; Hillstrom, Howard J.

    2011-01-01

    The purpose of our study was to examine 1st metatarsophalangeal (MTP) joint motion and flexibility and plantar loads in individuals with high, normal and low arch foot structure. Asymptomatic individuals (n=61), with high, normal and low arches participated in this study. Foot structure was quantified using malleolar valgus index (MVI) and arch height index (AHI). First MTP joint flexibility was measured using a specially constructed jig. Peak pressure under the hallux, 1st and 2nd metatarsals during walking was assessed using a pedobarograph. A one-way ANOVA with Bonferroni-adjusted post-hoc comparisons was used to assess between-group differences in MVI, AHI, Early and Late 1st MTP joint flexibility in sitting and standing, peak dorsiflexion (DF), and peak pressure under the hallux, 1st and 2nd metatarsals. Stepwise linear regression was used to identify predictors of hallucal loading. Significant between-group differences were found in MVI (F2,56=15.4, p<0.01), 1st MTP late flexibility in sitting (F2,57=3.7, p=0.03), and standing (F2,57=3.7, p=0.03). Post-hoc comparisons demonstrated that 1st MTP late flexibility in sitting was significantly higher in individuals with low arch compared to high arch structure, and that 1st MTP late flexibility in standing was significantly higher in individuals with low arch compared to normal arch structure. Stepwise regression analysis indicated that MVI and 1st MTP joint early flexibility in sitting explain about 20% of the variance in hallucal peak pressure. Our results provide objective evidence indicating that individuals with low arches show increased 1st MTP joint late flexibility compared to individuals with normal arch structure, and that hindfoot alignment and 1st MTP joint flexibility affect hallucal loading. PMID:21536440

  2. Minimally Invasive Arthrodesis of 1st Metatarsophalangeal Joint for Hallux Rigidus.

    PubMed

    Sott, A H

    2016-09-01

    First metatarsophalangeal joint arthrodesis plays a significant role in the management of symptomatic hallux rigidus/osteoarthritis of the 1st metatarsophalangeal joint. Several open and few percutaneous techniques have been described in the literature. This article describes and discusses a percutaneous technique that has been successfully used to achieve a pain-free stable and functional 1st metatarsophalangeal joint. All aspects of surgical indication and operative technique and details of patient-reported outcomes are presented with a referenced discussion. PMID:27524706

  3. A case-series study to explore the efficacy of foot orthoses in treating first metatarsophalangeal joint pain

    PubMed Central

    2010-01-01

    Background First metatarsophalangeal (MTP) joint pain is a common foot complaint which is often considered to be a consequence of altered mechanics. Foot orthoses are often prescribed to reduce 1st MTP joint pain with the aim of altering dorsiflexion at propulsion. This study explores changes in 1st MTP joint pain and kinematics following the use of foot orthoses. Methods The effect of modified, pre-fabricated foot orthoses (X-line®) were evaluated in thirty-two patients with 1st MTP joint pain of mechanical origin. The primary outcome was pain measured at baseline and 24 weeks using the pain subscale of the foot function index (FFI). In a small sub-group of patients (n = 9), the relationship between pain and kinematic variables was explored with and without their orthoses, using an electromagnetic motion tracking (EMT) system. Results A significant reduction in pain was observed between baseline (median = 48 mm) and the 24 week endpoint (median = 14.50 mm, z = -4.88, p < 0.001). In the sub-group analysis, we found no relationship between pain reduction and 1st MTP joint motion, and no significant differences were found between the 1st MTP joint maximum dorsiflexion or ankle/subtalar complex maximum eversion, with and without the orthoses. Conclusions This observational study demonstrated a significant decrease in 1st MTP joint pain associated with the use of foot orthoses. Change in pain was not shown to be associated with 1st MTP joint dorsiflexion nor with altered ankle/subtalar complex eversion. Further research into the effect of foot orthoses on foot function is indicated. PMID:20799935

  4. PROCEEDINGS: JOINT SYMPOSIUM ON DRY SO2 AND SIMULTANEOUS SO2/NOX CONTROL TECHNOLOGIES (1ST). VOLUME 1. FUNDAMENTAL RESEARCH AND PROCESS DEVELOPMENT

    EPA Science Inventory

    Forty six papers describing recent advances in dry sorbent injection technologies for SO2 control were presented at the 1st Joint Symposium on Dry SO2 and Simultaneous SO2/NOx Control Technologies. These papers covered the following topics: fundamental research; pilot-scale devel...

  5. Membrane Transport Phenomena (MTP)

    NASA Technical Reports Server (NTRS)

    Mason, Larry W.

    1997-01-01

    The activities during the fourth semi-annual period of the MTP project have involved the completion of the Science Concept Review (SCR) presentation and peer review, continuation of analyses for the mass transfer coefficients measured from MTA experiment data, and development of the second generation (MTP-II) instrument. The SCR panel members were generated several recommendations for the MTP project recommendations are : Table 1 Summary of Primary SCR Panel Recommendations (1) Continue and refine development of mass transfer coefficient analyses (2) Refine and upgrade analytical modeling associated with the MTP experiment. (3) Increase resolution of measurements in proximity of the membrane interface. (4) Shift emphasis to measurement of coupled transport effects (i.e., development of MTP phase II experiment concept).

  6. Membrane Transport Phenomena (MTP)

    NASA Technical Reports Server (NTRS)

    Mason, Larry W.

    1997-01-01

    The third semi-annual period of the MTP project has been involved with performing experiments using the Membrane Transport Apparatus (MTA), development of analysis techniques for the experiment results, analytical modeling of the osmotic transport phenomena, and completion of a DC-9 microgravity flight to test candidate fluid cell geometries. Preparations were also made for the MTP Science Concept Review (SCR), held on 13 June 1997 at Lockheed Martin Astronautics in Denver. These activities are detailed in the report.

  7. JANNAF 25th Airbreathing Propulsion Subcommittee, 37th Combustion Subcommittee and 1st Modeling and Simulation Subcommittee Joint Meeting. Volume 1

    NASA Technical Reports Server (NTRS)

    Fry, Ronald S.; Becker, Dorothy L.

    2000-01-01

    Volume I, the first of three volumes, is a compilation of 24 unclassified/unlimited-distribution technical papers presented at the Joint Army-Navy-NASA-Air Force (JANNAF) 25th Airbreathing Propulsion Subcommittee, 37th Combustion Subcommittee and 1st Modeling and Simulation Subcommittee (MSS) meeting held jointly with the 19th Propulsion Systems Hazards Subcommittee. The meeting was held 13-17 November 2000 at the Naval Postgraduate School and Hyatt Regency Hotel, Monterey, California. Topics covered include: a Keynote Address on Future Combat Systems, a review of the new JANNAF Modeling and Simulation Subcommittee, and technical papers on Hyper-X propulsion development and verification; GTX airbreathing launch vehicles; Hypersonic technology development, including program overviews, fuels for advanced propulsion, ramjet and scramjet research, hypersonic test medium effects; and RBCC engine design and performance, and PDE and UCAV advanced and combined cycle engine technologies.

  8. Status of MTP Data Analysis for TCSP

    NASA Technical Reports Server (NTRS)

    Mahoney, Michael J.

    2006-01-01

    Topics covered include: a) MTP temperature calibration and data analysis; b) Background for interpreting MTP data; c) Large amplitude temperature structure; d) Gravity waves (GWs) in MTP data; and e) Subsidence over hurricanes.

  9. PROCEEDINGS: JOINT SYMPOSIUM ON DRY SO2 AND SIMULTANEOUS SO2/NOX CONTROL TECHNOLOGIES (1ST): VOLUME 2. POWER PLANT INTEGRATION, ECONOMICS, AND FULL-SCALE EXPERIENCE

    EPA Science Inventory

    The proceedings document the First Joint Symposium on Dry SO2 and Simultaneous SO2/NOx Control Technologies, held November 13-16, 1984, in San Diego, CA. The symposium, sponsored jointly by EPRI and EPA, was the first meeting of its kind devoted solely to the discussion of emissi...

  10. Proceeding of the ACM/IEEE-CS Joint Conference on Digital Libraries (1st, Roanoke, Virginia, June 24-28, 2001).

    ERIC Educational Resources Information Center

    Association for Computing Machinery, New York, NY.

    Papers in this Proceedings of the ACM/IEEE-CS Joint Conference on Digital Libraries (Roanoke, Virginia, June 24-28, 2001) discuss: automatic genre analysis; text categorization; automated name authority control; automatic event generation; linked active content; designing e-books for legal research; metadata harvesting; mapping the…

  11. MTP: An atomic multicast transport protocol

    NASA Technical Reports Server (NTRS)

    Freier, Alan O.; Marzullo, Keith

    1990-01-01

    Multicast transport protocol (MTP); a reliable transport protocol that utilizes the multicast strategy of applicable lower layer network architectures is described. In addition to transporting data reliably and efficiently, MTP provides the client synchronization necessary for agreement on the receipt of data and the joining of the group of communicants.

  12. Geophysica MTP observations during the EUPLEX campaign

    NASA Technical Reports Server (NTRS)

    Mahoney, M. J.; Gary, Bruce

    2003-01-01

    The Jet Propulsion Laboratory (JPL) Microwave Temperature Profiler (MTP) was the first United States instrument to fly on the Russian Geophysica high-altitude research aircraft. Careful comparison of MTP measurements with radiosondes launched near the Geophysica flight track has allowed us to establish the flight level temperature to an accuracy of 0.2K.

  13. DC-8 MTP calibration for SOLVE-2

    NASA Technical Reports Server (NTRS)

    Mahoney, M. J.

    2003-01-01

    The Jet Propulsion Laboratory (JPL) Microwave Temperature Profiler (MTP) was the only instrument making temperature measurements at and below flight level on the DC-8 during the SOLVE-2 campaign. Many years of careful comparison of MTP measurements with radiosondes near the DC-8 flight track have shown that the flight level temperature can be determined to an accuracy of 0.2K relative to radiosondes.

  14. Antibiotic Spacer Arthroplasty for Revision MTP Arthrodesis: A Novel Means to Build the Implant: A Case Report

    PubMed Central

    Bitterman, Adam; Patel, Milap; Gurtowski, James P

    2016-01-01

    Metatarsophalangeal (MTP) joint osteoarthritis (OA), also known as hallux rigidus (HR), is the most common degenerative arthropathy of the foot and is often the result of trauma. There are multiple methods of addressing the patient’s pain and limited function. Arthrodesis is the gold standard to manage severe MTP arthritis with a highly significant union rate. With various techniques of arthrodesis available, ranging from cannulated screw fixation, Kirschner wires, as well as plate and screw fixation, the orthopedic surgeon has multiple modalities to address this ailment; however, when these fail due to infection, the armament is limited. Through the idea of articulating antibiotic spacers in other regions of the body such as the knee and hip, we present a novel technique to the creation of an antibiotic spacer in the setting of a failed infected MTP arthrodesis.  PMID:27114892

  15. Antibiotic Spacer Arthroplasty for Revision MTP Arthrodesis: A Novel Means to Build the Implant: A Case Report.

    PubMed

    Bitterman, Adam; Mathew, Cristin; Patel, Milap; Gurtowski, James P

    2016-01-01

    Metatarsophalangeal (MTP) joint osteoarthritis (OA), also known as hallux rigidus (HR), is the most common degenerative arthropathy of the foot and is often the result of trauma. There are multiple methods of addressing the patient's pain and limited function. Arthrodesis is the gold standard to manage severe MTP arthritis with a highly significant union rate. With various techniques of arthrodesis available, ranging from cannulated screw fixation, Kirschner wires, as well as plate and screw fixation, the orthopedic surgeon has multiple modalities to address this ailment; however, when these fail due to infection, the armament is limited. Through the idea of articulating antibiotic spacers in other regions of the body such as the knee and hip, we present a novel technique to the creation of an antibiotic spacer in the setting of a failed infected MTP arthrodesis. PMID:27114892

  16. Golgi localized barley MTP8 proteins facilitate Mn transport.

    PubMed

    Pedas, Pai; Schiller Stokholm, Michaela; Hegelund, Josefine Nymark; Ladegård, Anne Hald; Schjoerring, Jan Kofod; Husted, Søren

    2014-01-01

    Many metabolic processes in plants are regulated by manganese (Mn) but limited information is available on the molecular mechanisms controlling cellular Mn homeostasis. In this study, a yeast assay was used to isolate and characterize two genes, MTP8.1 and MTP8.2, which encode membrane-bound proteins belonging to the cation diffusion facilitator (CDF) family in the cereal species barley (Hordeum vulgare). Transient expression in onion epidermal cells showed that MTP8.1 and MTP8.2 proteins fused to the green fluorescent protein (GFP) are localized to Golgi. When heterologously expressed in yeast, MTP8.1 and MTP8.2 were found to be Mn transporters catalysing Mn efflux in a similar manner as the Golgi localized endogenous yeast protein Pmr1p. The level of MTP8.1 transcripts in barley roots increased with external Mn supply ranging from deficiency to toxicity, while MTP8.2 transcripts decreased under the same conditions, indicating non-overlapping functions for the two genes. In barley leaves, the expression of both MTP8 genes declined in response to toxic Mn additions to the roots suggesting a role in ensuring proper delivery of Mn to Golgi. Based on the above we suggest that barley MTP8 proteins are involved in Mn loading to the Golgi apparatus and play a role in Mn homeostasis by delivering Mn to Mn-dependent enzymes and/or by facilitating Mn efflux via secretory vesicles. This study highlights the importance of MTP transporters in Mn homeostasis and is the first report of Golgi localized Mn2+ transport proteins in a monocot plant species. PMID:25486417

  17. Golgi Localized Barley MTP8 Proteins Facilitate Mn Transport

    PubMed Central

    Pedas, Pai; Schiller Stokholm, Michaela; Hegelund, Josefine Nymark; Ladegård, Anne Hald; Schjoerring, Jan Kofod; Husted, Søren

    2014-01-01

    Many metabolic processes in plants are regulated by manganese (Mn) but limited information is available on the molecular mechanisms controlling cellular Mn homeostasis. In this study, a yeast assay was used to isolate and characterize two genes, MTP8.1 and MTP8.2, which encode membrane-bound proteins belonging to the cation diffusion facilitator (CDF) family in the cereal species barley (Hordeum vulgare). Transient expression in onion epidermal cells showed that MTP8.1 and MTP8.2 proteins fused to the green fluorescent protein (GFP) are localized to Golgi. When heterologously expressed in yeast, MTP8.1 and MTP8.2 were found to be Mn transporters catalysing Mn efflux in a similar manner as the Golgi localized endogenous yeast protein Pmr1p. The level of MTP8.1 transcripts in barley roots increased with external Mn supply ranging from deficiency to toxicity, while MTP8.2 transcripts decreased under the same conditions, indicating non-overlapping functions for the two genes. In barley leaves, the expression of both MTP8 genes declined in response to toxic Mn additions to the roots suggesting a role in ensuring proper delivery of Mn to Golgi. Based on the above we suggest that barley MTP8 proteins are involved in Mn loading to the Golgi apparatus and play a role in Mn homeostasis by delivering Mn to Mn-dependent enzymes and/or by facilitating Mn efflux via secretory vesicles. This study highlights the importance of MTP transporters in Mn homeostasis and is the first report of Golgi localized Mn2+ transport proteins in a monocot plant species. PMID:25486417

  18. MTP Observations During the ATTREX Integration and Test Flight

    NASA Technical Reports Server (NTRS)

    Mahoney, Michael J.

    2012-01-01

    MTP temperature calibration is excellent and agrees with the MMS calbration (or MMS agrees with MTP, since its calibration was com pleted long before that of MMS!) center dot Having radiosondes laun ched from the Global Hawk base is extremely important for accurate tem pe rature calibration in radiosonde - sparse oceanic regions center. The MTP measurement of the cold-point will make an important contribution to the future ATTREX field campaigns because the demonstrated sp ati al variation of cold- point requires continuous measurements which only the MTP can provide. Profiling with the aircraft is not adequate. The MTP-measured isentropes will be important in studying atmospheric dynamics in the TTL, and how t his dynamics affects both the composition and (possibly) the thermal structure of the TTL.

  19. National Sea Grant College Program Authorization Act of 1991. Joint Report of the Senate Committee on Commerce, Science, and Transportation and Senate Committee on Labor and Human Resources, S. 1563, 102D Congress, 1st Session.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. Senate Committee on Commerce, Science, and Transportation.

    A joint report by members of two Congressional Committees examined the proposed bill to carry out the National Sea Grant College Program Act and recommended that the bill be passed. The Sea Grant College Program Act authorizes appropriations for the National Sea Grant Program, which provides grants to support university-based marine research,…

  20. "Hard Science" for Gifted 1st Graders

    ERIC Educational Resources Information Center

    DeGennaro, April

    2006-01-01

    "Hard Science" is designed to teach 1st grade gifted students accurate and high level science concepts. It is based upon their experience of the world and attempts to build a foundation for continued love and enjoyment of science. "Hard Science" provides field experiences and opportunities for hands-on discovery working beside experts in the field…

  1. Modulated Tool-Path (MTP) Chip Breaking System

    SciTech Connect

    Graham, K. B.

    2010-04-01

    The Modulated Tool-Path (MTP) Chip Breaking System produces user-selectable chip lengths and workpiece finishes and is compatible with any material, workpiece shape, and depth of cut. The MTP chip breaking system consistently creates the desired size of chips regardless of workpiece size, shape, or material, and the machine operator does not need to make any adjustments during the machining operation. The system's programmer configures the part program that commands the machine tool to move in a specific fashion to deliver the desired part size, shape, chip length, and workpiece surface finish. The MTP chip breaking system helps manufacturers avoid the detrimental effects of continuous chips, including expensive repair costs, delivery delays, and hazards to personnel.

  2. Lock No. 1 St. Lucie Canal. Sector gates, internal struts ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Lock No. 1- St. Lucie Canal. Sector gates, internal struts- nose beams. - St. Lucie Canal, St. Lucie Lock No. 1, St. Lucie, Cross State Canal, Okeechobee Intracoastal Waterway, Stuart, Martin County, FL

  3. Postinfective skin contracture: a rare cause of fifth metatarsophalangeal joint subluxation

    PubMed Central

    Prakash, Jatin; Mehtani, Anil

    2014-01-01

    Dislocation or subluxation of the metatarsophalangeal joint (MTP) is common and usually follows a traumatic event. Non-traumatic causes usually include inflammatory arthritis (rheumatoid arthritis), connective tissue disorders, crowded shoewear or flexor digitorum longus tendon contracture. We present a very unusual case of subluxation of the fifth MTP joint following a postboil skin contracture. The case was treated with the release of contracture by Z-plasty. It resulted in concentric reduction of the joint and normal skin healing. PMID:25199201

  4. Postinfective skin contracture: a rare cause of fifth metatarsophalangeal joint subluxation.

    PubMed

    Prakash, Jatin; Mehtani, Anil

    2014-01-01

    Dislocation or subluxation of the metatarsophalangeal joint (MTP) is common and usually follows a traumatic event. Non-traumatic causes usually include inflammatory arthritis (rheumatoid arthritis), connective tissue disorders, crowded shoewear or flexor digitorum longus tendon contracture. We present a very unusual case of subluxation of the fifth MTP joint following a postboil skin contracture. The case was treated with the release of contracture by Z-plasty. It resulted in concentric reduction of the joint and normal skin healing. PMID:25199201

  5. Rescue of Mtp siRNA-induced hepatic steatosis by DGAT2 siRNA silencing.

    PubMed

    Tep, Samnang; Mihaila, Radu; Freeman, Alexander; Pickering, Victoria; Huynh, Felicia; Huyhn, Felicia; Tadin-Strapps, Marija; Stracks, Allison; Hubbard, Brian; Caldwell, Jeremy; Flanagan, W Michael; Kuklin, Nelly A; Ason, Brandon

    2012-05-01

    Microsomal triglyceride transfer protein (Mtp) inhibitors represent a novel therapeutic approach to lower circulating LDL cholesterol, although therapeutic development has been hindered by the observed increase in hepatic triglycerides and liver steatosis following treatment. Here, we used small interfering RNAs (siRNA) targeting Mtp to achieve target-specific silencing to study this phenomenon and to determine to what extent liver steatosis is induced by changes in Mtp expression. We observed that Mtp silencing led to a decrease in many genes involved in hepatic triglyceride synthesis. Given the role of diacylglycerol O-acyltransferase 2 (Dgat2) in regulating hepatic triglyceride synthesis, we then evaluated whether target-specific silencing of both Dgat2 and Mtp were sufficient to attenuate Mtp silencing-induced liver steatosis. We showed that the simultaneous inhibition of Dgat2 and Mtp led to a decrease in plasma cholesterol and a reduction in the accumulation of hepatic triglycerides caused by the inhibition of Mtp. Collectively, these findings provide a proof-of-principle for a triglyceride synthesis/Mtp inhibitor combination and represent a potentially novel approach for therapeutic development in which targeting multiple pathways can achieve the desired response. PMID:22355095

  6. Functional analysis of the rice vacuolar zinc transporter OsMTP1

    PubMed Central

    Menguer, Paloma K.; Farthing, Emily; Peaston, Kerry A.; Ricachenevsky, Felipe Klein; Fett, Janette Palma; Williams, Lorraine E.

    2013-01-01

    Heavy metal homeostasis is maintained in plant cells by specialized transporters which compartmentalize or efflux metal ions, maintaining cytosolic concentrations within a narrow range. OsMTP1 is a member of the cation diffusion facilitator (CDF)/metal tolerance protein (MTP) family of metal cation transporters in Oryza sativa, which is closely related to Arabidopsis thaliana MTP1. Functional complementation of the Arabidopsis T-DNA insertion mutant mtp1-1 demonstrates that OsMTP1 transports Zn in planta and localizes at the tonoplast. When heterologously expressed in the yeast mutant zrc1 cot1, OsMTP1 complemented its Zn hypersensitivity and was also localized to the vacuole. OsMTP1 alleviated, to some extent, the Co sensitivity of this mutant, rescued the Fe hypersensitivity of the ccc1 mutant at low Fe concentrations, and restored growth of the Cd-hypersensitive mutant ycf1 at low Cd concentrations. These results suggest that OsMTP1 transports Zn but also Co, Fe, and Cd, possibly with lower affinity. Site-directed mutagenesis studies revealed two substitutions in OsMTP1 that alter the transport function of this protein. OsMTP1 harbouring a substitution of Leu82 to a phenylalanine can still transport low levels of Zn, with an enhanced affinity for Fe and Co, and a gain of function for Mn. A substitution of His90 with an aspartic acid completely abolishes Zn transport but improves Fe transport in OsMTP1. These amino acid residues are important in determining substrate specificity and may be a starting point for refining transporter activity in possible biotechnological applications, such as biofortification and phytoremediation. PMID:23761487

  7. ISS Update: 1st Annual ISS R&D Conference

    NASA Video Gallery

    NASA Public Affairs Officer Kelly Humphries talks by phone on Wednesday with Julie Robinson, ISS Program Scientist, about the 1st Annual International Space Station Research and Development Confere...

  8. EMSL Quarterly Highlights Report: 1st Quarter, Fiscal Year 2009

    SciTech Connect

    Showalter, Mary Ann; Kathmann, Loel E.; Manke, Kristin L.

    2009-02-02

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2008 - December 2008) of Fiscal Year 2009.

  9. Electronic Health Records Place 1st at Indy 500

    MedlinePlus

    ... Navigation Bar Home Current Issue Past Issues EHR Electronic Health Records Place 1st at Indy 500 Past ... last May's Indy 500 had thousands of personal Electronic Health Records on hand for those attending—and ...

  10. 1st HPV Test for Use with Preservative Fluid

    MedlinePlus

    ... https://medlineplus.gov/news/fullstory_159789.html 1st HPV Test for Use With Preservative Fluid Human papillomavirus ... Food and Drug Administration has approved Roche's cobas HPV Test -- the first diagnostic to be used with ...

  11. EMSL Quarterly Highlights Report: 1st Quarter, FY08

    SciTech Connect

    Showalter, Mary Ann

    2008-01-28

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2007 - December 2007) of Fiscal Year 2008.

  12. The mtp40 gene is not present in all strains of Mycobacterium tuberculosis.

    PubMed Central

    Weil, A; Plikaytis, B B; Butler, W R; Woodley, C L; Shinnick, T M

    1996-01-01

    A multiple PCR-based assay that targets IS6110 and the mtp40 gene was evaluated for the rapid differentiation of Mycobacterium bovis and M. tuberculosis, two of the causative agents of tuberculosis. The IS6110 target is present in both species, whereas the mtp40 gene was thought to be specific for M.tuberculosis (P.Del Portillo, L.A. Murillo, and M.E. Patarroyo, J. Clin. Microbiol. 29:2163-2168, 1991). However, the mtp-40 gene is not present in all M. tuberculosis strains and, hence, is not useful for differentiating M.tuberculosis and M.bovis. PMID:8862608

  13. The Vacuolar Manganese Transporter MTP8 Determines Tolerance to Iron Deficiency-Induced Chlorosis in Arabidopsis.

    PubMed

    Eroglu, Seckin; Meier, Bastian; von Wirén, Nicolaus; Peiter, Edgar

    2016-02-01

    Iron (Fe) deficiency is a widespread nutritional disorder on calcareous soils. To identify genes involved in the Fe deficiency response, Arabidopsis (Arabidopsis thaliana) transfer DNA insertion lines were screened on a high-pH medium with low Fe availability. This approach identified METAL TOLERANCE PROTEIN8 (MTP8), a member of the Cation Diffusion Facilitator family, as a critical determinant for the tolerance to Fe deficiency-induced chlorosis, also on soil substrate. Subcellular localization to the tonoplast, complementation of a manganese (Mn)-sensitive Saccharomyces cerevisiae yeast strain, and Mn sensitivity of mtp8 knockout mutants characterized the protein as a vacuolar Mn transporter suitable to prevent plant cells from Mn toxicity. MTP8 expression was strongly induced on low-Fe as well as high-Mn medium, which were both strictly dependent on the transcription factor FIT, indicating that high-Mn stress induces Fe deficiency. mtp8 mutants were only hypersensitive to Fe deficiency when Mn was present in the medium, which further suggested an Mn-specific role of MTP8 during Fe limitation. Under those conditions, mtp8 mutants not only translocated more Mn to the shoot than did wild-type plants but suffered in particular from critically low Fe concentrations and, hence, Fe chlorosis, although the transcriptional Fe deficiency response was up-regulated more strongly in mtp8. The diminished uptake of Fe from Mn-containing low-Fe medium by mtp8 mutants was caused by an impaired ability to boost the ferric chelate reductase activity, which is an essential process in Fe acquisition. These findings provide a mechanistic explanation for the long-known interference of Mn in Fe nutrition and define the molecular processes by which plants alleviate this antagonism. PMID:26668333

  14. MTP Amendment Bill, 2014: towards re-imagining abortion care.

    PubMed

    Krishnan, Shweta

    2015-01-01

    In India, the 1971 Medical Termination of Pregnancy Act, while allowing abortions under a broad range of circumstances, can be considered a conservative law from a feminist perspective. The Act allows healthcare providers rather than women seeking abortion to have the final say on abortion, and creates an environment within which women are made dependent on their healthcare providers. On October 29, 2014, the Ministry of Health and Family Welfare released a draft of the MTP (Amendment) Bill 2014, which proposes changes that could initiate a shift in the focus of the Indian abortion discourse from healthcare providers to women. Such a shift would decrease the vulnerability of women within the clinical setting and free them from subjective interpretations of the law. The Bill also expands the base of healthcare providers by including mid-level and non-allopathic healthcare providers. While the medical community has resisted this inclusion, the author is in favour of it, arguing that in the face of the high rates of unsafe abortion, such a step is both ethical and necessary. Additionally, the clause extending the gestational limit could trigger ethical debates on eugenic abortions and sex-selective abortions. This paper argues that neither of these should be used to limit access to late-trimester termination, and should, instead, be dealt with separately and in a way that enquires into why such pregnancies are considered unwanted. PMID:25716439

  15. Design and construction of the 1st proton CT scanner

    NASA Astrophysics Data System (ADS)

    Coutrakon, G.; Bashkirov, V.; Hurley, F.; Johnson, R.; Rykalin, V.; Sadrozinski, H.; Schulte, R.

    2013-04-01

    This paper discusses the design and operation of the 1st proton CT scanner for 3D imaging. Reduction of proton range uncertainties and improved dose accuracy in the patient for treatment planning are central goals. A central CT slice acquired by reconstruction of 134 million proton tracks through a 14 cm spherical polystyrene phantom with high and low density inserts is presented.

  16. Microsomal Triglyceride Transfer Protein (MTP) Associates with Cytosolic Lipid Droplets in 3T3-L1 Adipocytes

    PubMed Central

    Robinson, Delia B.; Harris, Carla M.; Johnson, Joyce E.; Mohler, Peter J.; Jerome, W. Gray; Swift, Larry L.

    2015-01-01

    Lipid droplets are intracellular energy storage organelles composed of a hydrophobic core of neutral lipid, surrounded by a monolayer of phospholipid and a diverse array of proteins. The function of the vast majority of these proteins with regard to the formation and/or turnover of lipid droplets is unknown. Our laboratory was the first to report that microsomal triglyceride transfer protein (MTP), a lipid transfer protein essential for the assembly of triglyceride-rich lipoproteins, was expressed in adipose tissue of humans and mice. In addition, our studies suggested that MTP was associated with lipid droplets in both brown and white fat. Our observations led us to hypothesize that MTP plays a key role in lipid droplet formation and/or turnover. The objective of these studies was to gain insight into the function of MTP in adipocytes. Using molecular, biochemical, and morphologic approaches we have shown: 1) MTP protein levels increase nearly five-fold as 3T3-L1 cells differentiate into adipocytes. 2) As 3T3-L1 cells undergo differentiation, MTP moves from the juxtanuclear region of the cell to the surface of lipid droplets. MTP and perilipin 2, a major lipid droplet surface protein, are found on the same droplets; however, MTP does not co-localize with perilipin 2. 3) Inhibition of MTP activity has no effect on the movement of triglyceride out of the cell either as a lipid complex or via lipolysis. 4) MTP is found associated with lipid droplets within hepatocytes from human fatty livers, suggesting that association of MTP with lipid droplets is not restricted to adipocytes. In summary, our data demonstrate that MTP is a lipid droplet-associated protein. Its location on the surface of the droplet in adipocytes and hepatocytes, coupled with its known function as a lipid transfer protein and its increased expression during adipocyte differentiation suggest a role in lipid droplet biology. PMID:26267806

  17. First metatarsophalangeal joint arthrodesis.

    PubMed

    Yu, Gerard V; Gorby, Paul O

    2004-01-01

    First MTP joint arthrodesis continues to be a time-honored, effective, and valuable procedure as a primary or secondary surgery for various pathologies afflicting the first ray segment. Though commonly thought of as a salvage procedure, it has proven beneficial in the management of primary hallux limitus and rigidus, geriatric hallux valgus deformity, severe arthritis of any etiology, and conditions in which joint instability or deformity are not readily correctable by more traditional approaches. Since its initial description in the 1800s, the procedure has continued to be popular among orthopedic and podiatric surgeons. Success of the procedure is highly dependent on the position of fusion. Though surgeons are often fascinated and at times obsessed with a particular fixation technique, it cannot be over-emphasized that this takes a back seat to the importance of achieving proper position to meet the needs of an individual patient. Unlike joint resection or implant arthroplasty procedures, which commonly leave the hallux lacking stability and propulsion, first MPJ fusion has been shown to be effective during weight bearing and propulsion. The success enjoyed by the senior author continues to reinforce that motion is not necessary at the first MTP joint for good, pain-free function. PMID:15012033

  18. [Granuloma Gravidarum in a 37-year-old 1st Gravida, 1st Para--A Case Report].

    PubMed

    Findeklee, S

    2015-10-01

    The granuloma gravidarum is a rare benign tumour with gingival origin. It occurs in circa 0.2% of pregnancies. Mostly we see an asymptomatic course of disease terminated by hormonal changes after delivery. If the granuloma is associated with complaints of the pregnant woman, for example masticational pain or recurrent bleedings, therapeutic options are conservative therapy, surgery or delivery. We report the case of a 37-year-old 1st gravida, 1st para who had an induced delivery in the 39+2 gestational week because of a symptomatic granuloma gravidarum. We saw a spontaneous remission of the granuloma within 3 months post partum. The case report underlines the importance of suitable information for pregnant women about oral hygiene and the necessity of regular dental controls during pregnancy for prophylaxis of granuloma gravidarum. PMID:26402852

  19. News & Information President Chen Yiyu Meets with Omi Professor Wang Jie Meets with NSF Assistant Director Vice President Sun Jiaguang Visited Japan and Germany on International Evaluation Vice President Shen Wenqing Meets JST Delegation Vice President Wang Jie Meets with Vice President of the Royal Society of Edinburgh 12th Meeting of China-Korea Joint Committee for Basic Scientific Research Held Further Implement the Scientific Outlook for Development and Open up a New Prospect for Science Funding Panel Meeting for A3 Foresight Program 2008 held in Hangzhou Department Director's Fund for Earthquake Relief Vice President Shen Wenqing Meets IRRI Officials President Chen Yiyu Visits Taiwan Province NSFC VIP Attends the NSFC-JST Workshop 1st NSFC-JST Joint Evaluation for Funded Projects Ends Successfully NSFC Delegation Visits the U.S. Top Heads Meet at China-US Computer Science Leadership Summit President Chen Yiyu Met with Her Royal Highness Princess Maha Chari Sirindhorn of Thailand

    NASA Astrophysics Data System (ADS)

    2008-01-01

    President Chen Yiyu Meets with Omi Professor Wang Jie Meets with NSF Assistant Director Vice President Sun Jiaguang Visited Japan and Germany on International Evaluation Vice President Shen Wenqing Meets JST Delegation Vice President Wang Jie Meets with Vice President of the Royal Society of Edinburgh 12th Meeting of China-Korea Joint Committee for Basic Scientific Research Held Further Implement the Scientific Outlook for Development and Open up a New Prospect for Science Funding Panel Meeting for A3 Foresight Program 2008 held in Hangzhou Department Director's Fund for Earthquake Relief Vice President Shen Wenqing Meets IRRI Officials President Chen Yiyu Visits Taiwan Province NSFC VIP Attends the NSFC-JST Workshop 1st NSFC-JST Joint Evaluation for Funded Projects Ends Successfully NSFC Delegation Visits the U.S. Top Heads Meet at China-US Computer Science Leadership Summit President Chen Yiyu Met with Her Royal Highness Princess Maha Chari Sirindhorn of Thailand

  20. ["1st Therapeutic Red Cross Hospital" during the civil war].

    PubMed

    Simonenko, V B; Abashin, V G

    2014-04-01

    The article presents the documentary information about the founding, the establishment and early years of the 1st Therapeutic Red Cross Hospital - in the future - Mandryka Central Military Clinical Hospital of the Ministry of Defence of the Russian Federation. Presented the work of the Hospital during the dificult period of the Civil War, typhus epidemic, famine and devastation. Specified its staffing structure, command, medical and administrative staff, travel and accommodation till the moment of the deployment in the Silver Lane in Moscow. PMID:25051792

  1. The 1st All-Russian Workshop on Archaeoastronomy

    NASA Astrophysics Data System (ADS)

    Bochkarev, Nikolai G.

    2007-08-01

    The 1st All-Russia Workshop on Archaeoastronomy “Astronomical and World-Outlook Meaning of the Archaeological Monuments of South Ural” was held on June 19-25, 2006, at the ground of the archaeological center “Arkaim” (Chelyabinsk Region). Besides about 30 talks, astronomical measurements were performed at two archaeological objects under intensive study: Arkaim Site (Bronze Epoch, XVIII-XVI c. B.C.) and tumuli “with whiskers” complex Kondurovsky (V-VIII c. A.D.). The promising character of the megalithic complex on the Vera Island (Lake Turgoyak) was stated.

  2. Establishment and characterization of a new feline mammary cancer cell line, FkMTp.

    PubMed

    Borges, Ana; Adega, Filomena; Chaves, Raquel

    2016-08-01

    Studies on tumours in domestic animals are believed to greatly contribute to a better understanding of similar diseases in humans. Comparative studies have shown that feline mammary carcinomas share important features with human breast cancers, including a similar biological behaviour and histological appearance. In the present study we have established and characterized at different cellular levels one feline mammary cancer cell line, FkMTp, derived from a cat mammary carcinoma. The FkMTp cell line revealed to be a promising resource and tool to study tumour microevolution and all the mechanisms and processes involved in carcinogenesis from the tumour (primary culture) to the immortalized cell line. Several assays were conducted to assess the growth behaviour, differentiated morphology, anchorage independent growth in soft agar, wound-healing invasion and migration of the cell line across time (from the primary culture until the 160th passage). FkMTp revealed increased levels of anchorage independence, migration and invasion according to the course of time as well as different numbers of ploidy. These results demonstrate and validate the in vitro tumorigenicity of the FkMTp cell line. During the cell line establishment, it was cryopreserved approximately every six passages, including the tumour primary culture, allowing now the possibility to access almost any specific momento of the tumour progression. PMID:26883919

  3. An Evaluation of the Manufacturing Technology Partnership (MTP) Program. Technical Report No. 96-007.

    ERIC Educational Resources Information Center

    Hollenbeck, Kevin

    The Manufacturing Technology Program (MTP) is a partnership between General Motors, the United Auto Workers, and the public schools in Flint, Michigan, that originated as a preapprenticeship program and has since expanded into a program preparing youth for manufacturing. The programs' effectiveness was examined through a comparison group-based…

  4. MTP Gene Variants and Response to Lomitapide in Patients with Homozygous Familial Hypercholesterolemia.

    PubMed

    Kolovou, Genovefa D; Kolovou, Vana; Papadopoulou, Anna; Watts, Gerald F

    2016-07-01

    Homozygous familial hypercholesterolemia (HoFH) is a rare genetic disorder, which leads to premature cardiovascular diseases. Microsomal triglyceride transport protein (MTP) inhibitors, such as lomitapide, offer a new therapeutic approach for treating these patients. We evaluated the lipid lowering (LL) efficacy of lomitapide according to several gene variants in MTP. Four clinically and/or molecularly defined HoFH patients were treated with lomitapide in addition to conventional high intensity LL therapy and regular lipoprotein apheresis. Two patients responded to the therapy, with a significant reduction of LDL cholesterol (LDL-C>50%, hyper-responders). Sequencing of all exonic and intronic flanking regions of the MTP gene in all patients revealed 36 different variants. The hyper-responders to lomitapide shared six common variants: rs17533489, rs79194015, rs745075, rs41275715, rs1491246, and rs17533517, which were not seen in hypo-responders (reduction in LDL-C<50%). We suggest that in HoFH variants in the MTP gene may impact on the therapeutic response to lomitapide, but this requires further investigation. PMID:27170061

  5. 78 FR 65675 - Proposed Collection; 60-Day Comment Request; Multidisciplinary Treatment Planning (MTP) Within...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-01

    ... on multidisciplinary care in cancer. A total of 21 hospitals participating in the NCCCP through June...; Multidisciplinary Treatment Planning (MTP) Within the National Cancer Institute (NCI) Community Cancer Centers... Cancer Institute (NCI), National Institutes of Health (NIH), will publish periodic summaries of...

  6. Roles of plant metal tolerance proteins (MTP) in metal storage and potential use in biofortification strategies

    PubMed Central

    Ricachenevsky, Felipe K.; Menguer, Paloma K.; Sperotto, Raul A.; Williams, Lorraine E.; Fett, Janette P.

    2013-01-01

    Zinc (Zn) is an essential micronutrient for plants, playing catalytic or structural roles in enzymes, transcription factors, ribosomes, and membranes. In humans, Zn deficiency is the second most common mineral nutritional disorder, affecting around 30% of the world's population. People living in poverty usually have diets based on milled cereals, which contain low Zn concentrations. Biofortification of crops is an attractive cost-effective solution for low mineral dietary intake. In order to increase the amounts of bioavailable Zn in crop edible portions, it is necessary to understand how plants take up, distribute, and store Zn within their tissues, as well as to characterize potential candidate genes for biotechnological manipulation. The metal tolerance proteins (MTP) were described as metal efflux transporters from the cytoplasm, transporting mainly Zn2+ but also Mn2+, Fe2+, Cd2+, Co2+, and Ni2+. Substrate specificity appears to be conserved in phylogenetically related proteins. MTPs characterized so far in plants have a role in general Zn homeostasis and tolerance to Zn excess; in tolerance to excess Mn and also in the response to iron (Fe) deficiency. More recently, the first MTPs in crop species have been functionally characterized. In Zn hyperaccumulator plants, the MTP1 protein is related to hypertolerance to elevated Zn concentrations. Here, we review the current knowledge on this protein family, as well as biochemical functions and physiological roles of MTP transporters in Zn hyperaccumulators and non-accumulators. The potential applications of MTP transporters in biofortification efforts are discussed. PMID:23717323

  7. Mars Technology Program (MTP) Communications and Tracking Technologies for Mars Exploration

    NASA Technical Reports Server (NTRS)

    Antsos, Dimitrios

    2006-01-01

    The MTP Communications and Tracking Technology Development Program aims to develop critical enabling technology components and products that will make the future high capacity communications links from Mars possible. It comprises ten technology development tasks. This paper briefly describes each task and gives a summary of the current state of the research and future recommendations.

  8. Mn tolerance in rice is mediated by MTP8.1, a member of the cation diffusion facilitator family

    PubMed Central

    Ueno, Daisei

    2013-01-01

    Manganese (Mn) is an essential micronutrient for plants, but is toxic when present in excess. The rice plant (Oryza sativa L.) accumulates high concentrations of Mn in the aerial parts; however, the molecular basis for Mn tolerance is poorly understood. In the present study, genes encoding Mn tolerance were screened for by expressing cDNAs of genes from rice shoots in Saccharomyces cerevisiae. A gene encoding a cation diffusion facilitator (CDF) family member, OsMTP8.1, was isolated, and its expression was found to enhance Mn accumulation and tolerance in S. cerevisiae. In plants, OsMTP8.1 and its transcript were mainly detected in shoots. High or low supply of Mn moderately induced an increase or decrease in the accumulation of OsMTP8.1, respectively. OsMTP8.1 was detected in all cells of leaf blades through immunohistochemistry. OsMTP8.1 fused to green fluorescent protein was localized to the tonoplast. Disruption of OsMTP8.1 resulted in decreased chlorophyll levels, growth inhibition in the presence of high concentrations of Mn, and decreased accumulation of Mn in shoots and roots. However, there was no difference in the accumulation of other metals, including Zn, Cu, Fe, Mg, Ca, and K. These results suggest that OsMTP8.1 is an Mn-specific transporter that sequesters Mn into vacuoles in rice and is required for Mn tolerance in shoots. PMID:23963678

  9. Evaluation of the role of Mycobacterium tuberculosis pili (MTP) as an adhesin, invasin, and cytokine inducer of epithelial cells.

    PubMed

    Ramsugit, Saiyur; Pillay, Balakrishna; Pillay, Manormoney

    2016-01-01

    This study was undertaken in order to assess the involvement of Mycobacterium tuberculosis pili (MTP) as an adhesin, invasin, and cytokine inducer in the M. tuberculosis-epithelial cell interaction. A MTP-deficient strain of M. tuberculosis demonstrated a significant reduction of 69.39% (p=0.047) and 56.20% (p=0.033) in its ability to adhere to and invade A549 pulmonary epithelial cells, respectively, in comparison with the wild-type strain. Complementation of the MTP-deficient mutant restored its adhesion and invasion capacity back to the wild-type levels. Overall, it was found that similar concentrations of IL-1β, IL-4, IL-6, IL-8, G-CSF, IFN-γ, MCP-1, and TNF-α were induced in A549 cells infected with the MTP-proficient and MTP-deficient strains. However, at 48h post-infection, the MTP-deficient mutant induced significantly lower levels of TNF-α than the wild-type strain (p=0.033). Furthermore, at 72h post-infection, the mutant induced significantly higher levels of IL-8 than the wild-type (p=0.005). We conclude that MTP is an adhesin/invasin of epithelial cells and, while playing a role in M. tuberculosis entry, they do not appear to largely influence the epithelial cell cytokine response. PMID:26748229

  10. Mifamurtide: CGP 19835, CGP 19835A, L-MTP-PE, liposomal MTP-PE, MLV 19835A, MTP-PE, muramyltripeptide phosphatidylethanolamine.

    PubMed

    2008-01-01

    Mifamurtide is a conjugate of muramyl tripeptide linked to dipalmitoyl phosphatidyl ethanolamine; the phospholipid facilitates incorporation of the peptide into liposomes. The agent stimulates macrophages to seek out and destroy cancer cells. The compound was originated by Novartis (formerly CIBA-Geigy), and is being developed by IDM Pharma for osteosarcoma. Mifamurtide is being reviewed by regulatory authorities in the US and EU for this indication.CIBA-Geigy originally developed mifamurtide in the early 1980s and the agent was subsequently outlicensed to Jenner Biotherapies in the 1990s. IDM Pharma acquired the rights to the drug from Jenner in April 2003.IDM and Genesis Pharma have entered into an exclusive licensing and marketing agreement for mifamurtide in South East Europe. Under the agreement terms, IDM will receive an upfront fee from Genesis, as well as milestone payments on reaching certain sales levels in the territory. Medison Pharma signed an agreement with IDM Pharma for the sales and marketing of mifamurtide in Israel. IDM will receive an upfront license fee from Medison and will be entitled to receive a milestone payment upon regulatory approval of the agent in Israel, as well as royalties on net sales.IDM outlicensed exclusive marketing rights for mifamurtide in the UK and Ireland to Cambridge Laboratories in June 2005. In exchange, IDM is entitled to an upfront license fee and milestone payments prior to launch, as well as royalties calculated on product sales.Previously, Chiron Vaccines (a joint venture between Novartis and Chiron formed in 1995) investigated mifamurtide as an adjuvant in HIV gp120 vaccine; however, development has been discontinued.IDM Pharma will purchase approximately 7.1 million shares of its common stock to raise approximately $US23.5 million in net proceeds. The company intends to use the funds for working capital and corporate purposes, including the company's activities related to gaining marketing approval of

  11. Does specific footwear facilitate energy storage and return at the metatarsophalangeal joint in running?

    PubMed

    Willwacher, Steffen; König, Manuel; Potthast, Wolfgang; Brüggemann, Gert-Peter

    2013-10-01

    Longitudinal midsole bending stiffness and elasticity are two critical features in the construction of running shoes. Stiff elastic materials (eg, carbon fiber) can be used to alter the midsole bending behavior. The purpose of this study was to investigate the effects of midsole stiffness and elasticity manipulation on metatarsophalangeal (MTP) joint mechanics during running in 19 male subjects at 3.5 m/s. Midsole bending stiffness and elasticity were modified by means of carbon fiber insoles of varying thickness. Stiffening the shoe structures around the MTP joint caused a shift of the point of force application toward the front edge of the shoe-ground interface. Negative work was significantly reduced for the stiffest shoe condition and at the same time a significant increase of positive work at the MTP joint was found. It seems plausible that the increase in positive work originates from the reutilization of elastic energy that was stored inside the passive elastic structures of the shoe and toe flexing muscle tendon units. Further, an increase in midsole longitudinal bending stiffness seems to alter the working conditions and mechanical power generation capacities of the MTP plantar flexing muscle tendon units by changing ground reaction force leverage and MTP angular velocity. PMID:24203172

  12. Ultrasonographic Assessment of Fifth Metatarsophalangeal Joint Erosion in Rheumatoid Arthritis: Which Aspect Is Better?

    PubMed

    Inanc, Nevsun; Ozen, Gulsen; Aydin, Sibel Zehra; Kasapoglu-Gunal, Esen; Direskeneli, Haner

    2016-04-01

    In this study, the best ultrasound (US) aspect for detection of fifth metatarsophalangeal (MTP) joint erosions, the most frequently eroded joint, in rheumatoid arthritis (RA) patients is investigated. Forty-eight RA patients (F/M = 35/13, mean age and disease durations 50.3 ± 11.8 and 7.9 ± 6.9 y, respectively) were evaluated by B-mode US for erosion. Images were obtained from the dorsal, lateral and plantar aspect of the fifth MTP joint, in longitudinal and transverse scans. The fifth MTP erosions were detected in 36 of 48 patients (75%) and 67 of 96 feet (69.8%). Of the erosions, 15 (22.4%), 53 (79.1%) and 59 (88.0%) were observed at dorsal, lateral and plantar aspects, respectively. Despite not being statistically different, the detection rate of fifth MTP erosions was numerically higher in the plantar aspect than both the lateral and dorsal aspects. In conclusion, the fifth MTP erosions in RA patients are more commonly detected in the plantar aspect US than in dorsal and lateral assessments. PMID:26742892

  13. Transcriptional activation and localization of expression of Brassica juncea putative metal transport protein BjMTP1

    PubMed Central

    Muthukumar, Balasubramaniam; Yakubov, Bakhtiyor; Salt, David E

    2007-01-01

    Background Metal hyperaccumulators, including various Thlaspi species, constitutively express the putative metal transporter MTP1 to high levels in shoots. Here we present data on the transcriptional regulation and localization of expression of the homologous gene BjMTP1 in Brassica juncea. Though B. juncea lacks the ability to hyperaccumulate metals, its relatively high biomass, rapid growth and relatedness to true metal hyperaccumulating plants makes it a promising starting point for the development of plants for phytoremediation. Our goal in this study is to determine the transcriptional regulation of MTP1 in order to start to better understanding the physiological role of MTP1 in B. juncea. Results Steady-state mRNA levels of BjMTP1 were found to be enhanced 8.8, 5.9, and 1.6-fold in five-day-old B. juncea seedlings after exposure to Ni2+, Cd2+ or Zn2+, respectively. This was also reflected in enhanced GUS activity in B. juncea seedlings transformed with BjMTP1 promoter::GUSPlus after exposure to these metals over a similar range of toxicities from mild to severe. However, no increase in GUS activity was observed after exposure of seedlings to cold or heat stress, NaCl or hydrogen peroxide. GUS expression in Ni2+ treated seedlings was localized in roots, particularly in the root-shoot transition zone. In four- week- old transgenic plants BjMTP1 promoter activity also primarily increased in roots in response to Ni2+ or Cd2+ in plants transformed with either GUS or mRFP1 as reporter genes, and expression was localized to the secondary xylem parenchyma. In leaves, BjMTP1 promoter activity in response to Ni2+ or Cd2+ spiked after 24 h then decreased. In shoots GUS expression was prominently present in the vasculature of leaves, and floral parts. Conclusion Our studies establish that a 983 bp DNA fragment upstream of the BjMTP1 translational start site is sufficient for the specific activation by Ni2+ and Cd2+ of BjMTP1 expression primarily in roots. Activation of

  14. Cucumber metal transport protein MTP8 confers increased tolerance to manganese when expressed in yeast and Arabidopsis thaliana

    PubMed Central

    Migocka, Magdalena; Papierniak, Anna; Maciaszczyk-Dziubińska, Ewa; Poździk, Piotr; Posyniak, Ewelina; Garbiec, Arnold; Filleur, Sophie

    2014-01-01

    Cation diffusion facilitator (CDF) proteins are ubiquitous divalent cation transporters that have been proved to be essential for metal homeostasis and tolerance in Archaebacteria, Bacteria, and Eukaryota. In plants, CDFs are designated as metal tolerance proteins (MTPs). Due to the lack of genomic resources, studies on MTPs in other plants, including cultivated crops, are lacking. Here, the identification and organization of genes encoding members of the MTP family in cucumber are described. The first functional characterization of a cucumber gene encoding a member of the Mn-CDF subgroup of CDF proteins, designated as CsMTP8 based on the highest homology to plant MTP8, is also presented. The expression of CsMTP8 in Saccharomyces cerevisiae led to increased Mn accumulation in yeast cells and fully restored the growth of mutants hypersensitive to Mn in Mn excess. Similarly, the overexpression of CsMTP8 in Arabidopsis thaliana enhanced plant tolerance to high Mn in nutrition media as well as the accumulation of Mn in plant tissues. When fused to green fluorescent protein (GFP), CsMTP8 localized to the vacuolar membranes in yeast cells and to Arabidopsis protoplasts. In cucumber, CsMTP8 was expressed almost exclusively in roots, and the level of gene transcript was markedly up-regulated or reduced under elevated Mn or Mn deficiency, respectively. Taken together, the results suggest that CsMTP8 is an Mn transporter localized in the vacuolar membrane, which participates in the maintenance of Mn homeostasis in cucumber root cells. PMID:25039075

  15. The Vacuolar Manganese Transporter MTP8 Determines Tolerance to Iron Deficiency-Induced Chlorosis in Arabidopsis1[OPEN

    PubMed Central

    2016-01-01

    Iron (Fe) deficiency is a widespread nutritional disorder on calcareous soils. To identify genes involved in the Fe deficiency response, Arabidopsis (Arabidopsis thaliana) transfer DNA insertion lines were screened on a high-pH medium with low Fe availability. This approach identified METAL TOLERANCE PROTEIN8 (MTP8), a member of the Cation Diffusion Facilitator family, as a critical determinant for the tolerance to Fe deficiency-induced chlorosis, also on soil substrate. Subcellular localization to the tonoplast, complementation of a manganese (Mn)-sensitive Saccharomyces cerevisiae yeast strain, and Mn sensitivity of mtp8 knockout mutants characterized the protein as a vacuolar Mn transporter suitable to prevent plant cells from Mn toxicity. MTP8 expression was strongly induced on low-Fe as well as high-Mn medium, which were both strictly dependent on the transcription factor FIT, indicating that high-Mn stress induces Fe deficiency. mtp8 mutants were only hypersensitive to Fe deficiency when Mn was present in the medium, which further suggested an Mn-specific role of MTP8 during Fe limitation. Under those conditions, mtp8 mutants not only translocated more Mn to the shoot than did wild-type plants but suffered in particular from critically low Fe concentrations and, hence, Fe chlorosis, although the transcriptional Fe deficiency response was up-regulated more strongly in mtp8. The diminished uptake of Fe from Mn-containing low-Fe medium by mtp8 mutants was caused by an impaired ability to boost the ferric chelate reductase activity, which is an essential process in Fe acquisition. These findings provide a mechanistic explanation for the long-known interference of Mn in Fe nutrition and define the molecular processes by which plants alleviate this antagonism. PMID:26668333

  16. Association of L-FABP T94A and MTP I128T polymorphisms with hyperlipidemia in Chinese subjects.

    PubMed

    Tian, Yingying; Li, Hui; Wang, Shanbo; Yan, Jin; Chen, Zhiheng; Li, Zhenyu; Feng, Han; Zhou, Honghao; Ouyang, Dongsheng

    2015-03-01

    The purpose of this study was to evaluate the relation between the L-FABP T94A and MTP I128T polymorphisms and hyperlipidemia in Chinese subjects. We recruited 390 volunteers: 201 hyperlipidemic and 189 healthy volunteers. The L-FABP T94A and MTP I128T polymorphisms were genotyped using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Anthropometry, lipid profile, and liver function of the subjects were determined. We observed that male carriers of the L-FABP A94 allele had significantly higher body weight (P = 0.012), higher body mass index (BMI) (P = 0.014), and higher plasma triacylglycerol levels (TAG) (P = 0.033) and lower ratios of high-density lipoprotein cholesterol (HDL-C) to total cholesterol (TC) (P = 0.008) than T94 homozygotes. The MTP T128 allele was associated with significantly lower serum TC (P < 0.001) and low-density lipoprotein cholesterol (LDL-C) (P < 0.001) levels in males. There was a direct correlation between the MTP T128 allele and a decreased risk of hyperlipidemia after adjusting for body mass index (OR = 0.327, 95 % CI: 0.178-0.600, P < 0.001). In conclusion, both the MTP I128T and the L-FABP T94A polymorphisms can affect serum lipid levels in the Chinese population. The MTP T128 allele offers protection against hyperlipidemia in the Chinese population. PMID:25663234

  17. Some characteristics of inversions in Tomsk according to MTP-5 temperature profiler

    NASA Astrophysics Data System (ADS)

    Akhmetshina, A. S.; Kizhner, L. I.; Gorbatenko, V. P.; Zuev, V. V.; Shelekhov, A. P.; Shelekhova, E. A.

    2014-11-01

    Data on temperature inversions in the vicinity of Tomsk on the basis of MTP-5PE profiler data carried out at the IMCES SB RAS were summarized. It is shown that during persistent long-lived powerful anticyclones there is high recurrence of temperature inversions - they occur every day, or 90% of the time. A few characteristics of inversions observed in the region of the Bogashevo airport are presented.

  18. Evaluation of mtp40 genomic fragment amplification for specific detection of Mycobacterium tuberculosis in clinical specimens.

    PubMed Central

    Herrera, E A; Segovia, M

    1996-01-01

    A PCR assay based on the species-specific mtp40 genomic fragment was developed for the specific detection and identification of Mycobacterium tuberculosis in different uncultured clinical specimens. The aim of the study was to evaluate the clinical applicability of this target DNA in comparison with those of conventional microbiological methods and to compare the results obtained with those obtained after amplification with the IS6110 repetitive element. Discrepant results were interpreted in conjunction with the patients' clinical data, medical histories, and response to therapy. A total of 172 specimens from 162 patients with respiratory symptoms were tested, 101 specimens were obtained from 92 patients clinically suspected of having tuberculosis, and 71 specimens were obtained from 70 patients without known mycobacterial infection. The results of our study suggest that PCR amplification with the mtp40 genomic fragment provides a highly sensitive and specific technique for the detection of M. tuberculosis strains in clinical samples. It allows for the differentiation between M. tuberculosis and other related mycobacteria, including M. bovis, and is more specific than the IS6110 target. For these and other reasons, we propose that the mtp40 assay is a possible alternative for the specific direct detection of M. tuberculosis in clinical laboratories. PMID:8727885

  19. 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop

    SciTech Connect

    none,

    2011-10-01

    The U.S. marine energy industry is actively pursuing development of offshore wind and marine hydrokinetic (MHK) energy systems. Experience in the wind energy sector demonstrates that new technology development requires thorough measurement and characterization of the environmental conditions prevalent at installation sites and of technology operating in the field. Presently, there are no turn-key instrumentation system solutions that meet the measurement needs of the marine energy industry. The 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop brought together technical experts from government laboratories, academia, and industry representatives from marine energy, wind, offshore oil and gas, and instrumentation developers to present and discuss the instrumentation needs of the marine energy industry. The goals of the meeting were to: 1. Share the latest relevant knowledge among technical experts; 2. Review relevant state-of-the-art field measurement technologies and methods; 3. Review lessons learned from recent field deployments; 4. Identify synergies across different industries; 5. Identify gaps between existing and needed instrumentation capabilities; 6. Understand who are the leading experts; 7. Provide a forum where stakeholders from the marine energy industry could provide substantive input in the development of new marine energy field deployable instrumentation packages.

  20. THEOS: The1st Thailand EO System and

    NASA Astrophysics Data System (ADS)

    Peanvijarnpong, Chanchai

    Thailand has engaged in remote sensing satellite technological and scientific development many years since early 1980s. Thailand Landsat Station was established as a regional center of data processing and dissemination for Thai scientists for data applications. Over the years, GISTDA and Thai user community have been gaining technical experience and expertise in satellite data applications around the country such natural resources and environmental management, forest inventory, forest change detections, soil mapping, land-use and land cover mapping, crop type mapping, coastal shrimp farming, flood zone mapping, base mapping, water and drought management. The Government of Thailand realizes that remote sensing satellite technology is an important mechanism for social and economic development of the country. So the 1st Thailand Earth Observation System (THEOS) development program was approved by the Government since 2003. THEOS system is sub-synchronous satellite orbiting around the earth at 822 km. altitude same as SPOT satellites. It carries two imaging instruments; 2-m Panchromatic telescope with 22 km. swath width and 15-m resolution camera with four-multi-spectral band and 90-km swath wide. THEOS is scheduled to launch around March 2008. A number of technological and scientific activities has been implementing for Thailand and international scientific user community. Therefore THEOS is strong endorsement from the Government of Thailand on the value of remote sensing technology. This paper presents Thailand EO activities including THEOS System and its plans.

  1. 1st Joint European Conference on Therapeutic Targets and Medicinal Chemistry (TTMC 2015)

    PubMed Central

    Le Borgne, Marc; Haidar, Samer; Duval, Olivier; Wünsch, Bernhard; Jose, Joachim

    2015-01-01

    The European Conference on Therapeutic Targets and Medicinal Chemistry is a new two-day meeting on drug discovery that is focused on therapeutic targets and the use of tools to explore all fields of drug discovery and drug design such as molecular modelling, bioorganic chemistry, NMR studies, fragment screening, in vitro assays, in vivo assays, structure activity relationships, autodisplay. Abstracts of keynote lectures, plenary lectures, junior lectures, flash presentations, and posters presented during the meeting are collected in this report. PMID:26712767

  2. 1st Joint European Conference on Therapeutic Targets and Medicinal Chemistry (TTMC 2015).

    PubMed

    Le Borgne, Marc; Haidar, Samer; Duval, Olivier; Wünsch, Bernhard; Jose, Joachim

    2015-01-01

    The European Conference on Therapeutic Targets and Medicinal Chemistry is a new two-day meeting on drug discovery that is focused on therapeutic targets and the use of tools to explore all fields of drug discovery and drug design such as molecular modelling, bioorganic chemistry, NMR studies, fragment screening, in vitro assays, in vivo assays, structure activity relationships, autodisplay. Abstracts of keynote lectures, plenary lectures, junior lectures, flash presentations, and posters presented during the meeting are collected in this report. PMID:26712767

  3. VIEW WEST, 1ST FLOOR, EAST ROOM, HYDRAULIC COTTON PRESS, DETAIL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW WEST, 1ST FLOOR, EAST ROOM, HYDRAULIC COTTON PRESS, DETAIL, CONTINENTAL GIN COMPANY HYDRAULIC TANK - Magnolia Plantation, Cotton Gins & Presses, LA Route 119, Natchitoches, Natchitoches Parish, LA

  4. 94. DETAIL, SAME BEAN AS ABOVE, MARKED 'PATENTED DEC. 1ST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    94. DETAIL, SAME BEAN AS ABOVE, MARKED 'PATENTED DEC. 1ST 1857' - Smithsonian Institution Building, 1000 Jefferson Drive, between Ninth & Twelfth Streets, Southwest, Washington, District of Columbia, DC

  5. Foreword to Selected presentations from the 1st European Hip Sport Meeting.

    PubMed

    Dallari, Dante; Ribas, Manuel

    2016-05-14

    Recent years have witnessed a growing number of people practising sports both at professional and amateur level. This trend led to a progressive rise in the incidence and prevalence of acute and chronic hip damage. The treatment of hip disease in subjects practising sports is a major challenge for the orthopaedic surgeon. The evaluation of patients, in particular those of young age with high functional demands, is inevitably complex and should be performed with a multidisciplinary approach; from a surgical point of view, it is essential to carefully assess whether the indication is towards conservative surgery or hip replacement surgery. The advent of arthroscopic surgery in recent years has allowed us to improve our knowledge of hip joint diseases, such as femoroacetabular impingement that is typical of sports and overuse activity. A correct and early diagnosis of the disease can direct the patient promptly to a conservative surgical treatment that could reduce the progression of degenerative pathology. However, when the joint is permanently damaged, the only reliable solution remains prosthetic surgery, leading to a series of issues that the orthopaedic surgeon should be able to master, leading to a thoughtful decision on, for example, which implant to use, which biomaterials, which surgical approach or which sport to practise after surgery. This supplement contains selected contributions stemming from the work performed by internationally recognised experts in the field and presented during the 1st European Hip Sport Meeting held in Bologna on May 19th, 20th, 2016 that we had the honour to co-chair. We hope that these contributions will help the orthopaedic surgeon, the sports physician and physiotherapist in their day-to-day practice, and will help in fulfilling our ultimate aim to improve the knowledge of the hip pathology related to sports and overuse activities. PMID:27174057

  6. Operation WIGWAM, series volume, oceanic test. 1st edition

    SciTech Connect

    Weary, S.E.; Ozeroff, W.J.; Sperling, J.L.; Collins, B.

    1980-05-30

    This report describes the activities of DoD participants in the atmospheric nuclear test series, Operation WIGWAM, which involved only one deep underwater shot in the Pacific, approximately 500 miles southwest of San Diego, CA. WIGWAM was essentially a single service operation with minimal AEC and contractor participation. The various levels at which Dod personnel participated within the Joint Task Group 7 are identified.

  7. Kindergarten to 1st Grade: Classroom Characteristics and the Stability and Change of Children's Classroom Experiences

    ERIC Educational Resources Information Center

    La Paro, Karen M.; Rimm-Kaufman, Sara E.; Pianta, Robert C.

    2006-01-01

    This study examines the classroom experiences of 192 children followed longitudinally from kindergarten to 1st grade. Time-sampled observations of children were conducted to compare learning formats, teaching activities, and children's engagement in activities between kindergarten and 1st grade. Classroom observations also were conducted to…

  8. Proceedings of the 1st Puerto Rico Biobanking Workshop

    PubMed Central

    Mora, Edna; Robb, James A.; Stefanoff, Gustavo; Mellado, Robert Hunter; Coppola, Domenico; Muñoz-Antonia, Teresita; Flores, Idhaliz

    2015-01-01

    The 1st Puerto Rico Biobanking Workshop took place on August 20th, 2014 in the Auditorium of the Comprehensive Cancer Center of the University of Puerto Rico, Medical Sciences Campus in San Juan Puerto Rico. The program for this 1-day, live workshop included lectures by three biobanking experts, followed by presentations from existing biobanks in Puerto Rico and audience discussion. The need for increasing biobanking expertise in Puerto Rico stems from the fact that Hispanics in general are underrepresented in the biobanks in existence in the US, which limits the research conducted specifically to understand the molecular differences in cancer cells compared to other better studied populations. In turn, this lack of information impairs the development of better diagnostic and therapeutic approaches for our population. Dr. James Robb, M.D., F.C.A.P., consulting pathologist to the National Cancer Institute (NCI) and the Office of Biorepositories and Biospecimen Research (OBBR), opened the workshop with a discussion on the basic aspects of the science of biobanking (e.g., what is a biobank; its goals and objectives; protocols and procedures) in his talk addressing the importance of banking tissues for advancing biomedical research. Next, Dr. Gustavo Stefanoff, from the Cancer Institutes Network of Latin America (RINC by its name in Spanish), explained the mission, objectives, and structure of the Network of Latin-American and Caribbean Biobanks (REBLAC by its name in Spanish), which despite limited resources and many challenges, currently accrue high quality human tissue specimens and data to support cancer research in the region. Dr. Robert Hunter-Mellado, Professor of Internal Medicine, Universidad Central del Caribe, followed with an examination of the ethical and regulatory aspects of biobanking tissues for future research, including informed consent of subjects; protection of human subjects rights; and balancing risks and benefit ratios. In the afternoon, the

  9. Proceedings of the 1st Puerto Rico Biobanking Workshop.

    PubMed

    Mora, Edna; Robb, James A; Stefanoff, Gustavo; Mellado, Robert Hunter; Coppola, Domenico; Muñoz-Antonia, Teresita; Flores, Idhaliz

    2014-01-01

    The 1st Puerto Rico Biobanking Workshop took place on August 20st, 2014 in the Auditorium of the Comprehensive Cancer Center of the University of Puerto Rico, Medical Sciences Campus in San Juan Puerto Rico. The program for this 1-day, live workshop included lectures by three biobanking experts, followed by presentations from existing biobanks in Puerto Rico and audience discussion. The need for increasing biobanking expertise in Puerto Rico stems from the fact that Hispanics in general are underrepresented in the biobanks in existence in the US, which limits the research conducted specifically to understand the molecular differences in cancer cells compared to other better studied populations. In turn, this lack of information impairs the development of better diagnostic and therapeutic approaches for our population. Dr. James Robb, M.D., F.C.A.P., consulting pathologist to the National Cancer Institute (NCI) and the Office of Biorepositories and Biospecimen Research (OBBR), opened the workshop with a discussion on the basic aspects of the science of biobanking (e.g., what is a biobank; its goals and objectives; protocols and procedures) in his talk addressing the importance of banking tissues for advancing biomedical research. Next, Dr. Gustavo Stefanoff, from the Cancer Institutes Network of Latin America (RINC by its name in Spanish), explained the mission, objectives, and structure of the Network of Latin-American and Caribbean Biobanks (REBLAC by its name in Spanish), which despite limited resources and many challenges, currently accrue high quality human tissue specimens and data to support cancer research in the region. Dr. Robert Hunter-Mellado, Professor of Internal Medicine, Universidad Central del Caribe, followed with an examination of the ethical and regulatory aspects of biobanking tissues for future research, including informed consent of subjects; protection of human subjects rights; and balancing risks and benefit ratios. In the afternoon, the

  10. Analgesic Effects of 1st Generation Anti-histamines in Mice.

    PubMed

    Takahashi, Mebae; Shima, Kazuhiro; Tsuchiya, Masahiro; Hagiwara, Yoshihiro; Mizoguchi, Hirokazu; Sakurada, Shinobu; Sugawara, Shunji; Fujita, Takuo; Tadano, Takeshi; Watanabe, Makoto; Fukumoto, Satoshi; Endo, Yasuo

    2016-01-01

    Pain is sensed, transmitted, and modified by a variety of mediators and receptors. Histamine is a well-known mediator of pain. In addition to their anti-histaminic effects, the classical, or 1st generation, anti-histamines (1st AHs) possess, to various degrees, anti-muscarinic, anti-serotonergic, anti-adrenergic, and other pharmacologic effects. Although there have been attempts to use 1st AHs as analgesics and/or analgesic adjuvants, the advent of non-steroidal anti-inflammatory drugs (NSAIDs) discouraged such trials. We previously reported that in patients with temporomandibular disorders, osteoporosis, and/or osteoarthritis, the analgesic effects of certain 1st AHs (chlorpheniramine and diphenhydramine) are superior to those of the NSAIDs flurbiprofen and indomethacin. Here, we compared analgesic effects among 1st AHs and NSAIDs against responses shown by mice to intraperitoneally injected 0.7% acetic acid. Since 1st AHs are water soluble, we selected water-soluble NSAIDs. For direct comparison, drugs were intravenously injected 30 min before the above tests. Histamine-H1-receptor-deficient (H1R-KO) mice were used for evaluating H1-receptor-independent effects. The tested 1st AHs (especially cyproheptadine) displayed or tended to display analgesic effects comparable to those of NSAIDs in normal and H1R-KO mice. Our data suggest that the anti-serotonergic and/or anti-adrenergic effects of 1st AHs make important contributions to their analgesic effects. Moreover, combination of a 1st AH with an NSAID (cyclooxygenase-1 inhibitor) produced remarkably potent analgesic effects. We propose that a 1st AH, by itself or in combination with a cyclooxygenase-1 inhibitor, should undergo testing to evaluate its usefulness in analgesia. PMID:27040636

  11. 7. DETAIL, NOTCHED ROUGH HEWN JOINTS AND BEAMS PLUS WINDOW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. DETAIL, NOTCHED ROUGH HEWN JOINTS AND BEAMS PLUS WINDOW UNDER 1ST FLOOR PORCH, SOUTH ELEVATION, LOOKING NORTH-NORTHWEST. - Fort Leavenworth, Building No. 17, 20-22 Sumner Place, Leavenworth, Leavenworth County, KS

  12. Muramyl tripeptide-phosphatidyl ethanolamine encapsulated in liposomes (L-MTP-PE) in the treatment of osteosarcoma.

    PubMed

    Meyers, Paul A; Chou, Alexander J

    2014-01-01

    Bacille Calmette-Guerin (BCG) has been used for decades as an immune stimulant to treat cancer. Early work by Fidler and Kleinerman identified muramyl dipeptide (MDP) as a critical component of the BCG cell wall which retained most of the immunostimulatory properties of the native BCG. Addition of a peptide to MDP resulted in muramyl tripeptide (MTP) which allowed incorporation into liposomal membranes. The resulting pharmaceutical, liposomal muramyl tripeptide phosphatidyl ethanolamine (L-MTP-PE or mifamurtide) showed activity in preclinical models of human cancers. Phase I studies documented the safety of the compound for human administration. These trials did not reach a maximally tolerated dose (MTD), and the dose chosen for phase II trials was a biologically optimized dose, not an MTD. Phase II studies showed decreased risk of further recurrence in patients who received mifamurtide after surgical ablation of metastatic osteosarcoma. A phase III prospective randomized trial demonstrated a statistically significant reduction in the risk of death from osteosarcoma when MTP was added to systemic chemotherapy for the treatment of localized osteosarcoma. The same trial allowed treatment of patients who presented with initially metastatic disease. While the overall and event-free survival was improved in patients with metastatic osteosarcoma who received L-MTP-PE, the sample size was small and the improvement did not achieve conventional statistical significance. From 2008 to 2012, patients with metastatic and recurrent osteosarcoma were given L-MTP-PE in an expanded access trial, and the results suggest a decreased risk of subsequent recurrence and death with the inclusion of L-MTP-PE in the treatment strategy for these high-risk patients. PMID:24924182

  13. Macroscopic lithotype characterisation of the 1st Middle-Polish (1st Lusatian) Lignite Seam in the Miocene of central Poland

    NASA Astrophysics Data System (ADS)

    Widera, Marek

    2012-03-01

    The 1st Middle-Polish (1st Lusatian) Lignite Seam is exploited in open-cast mines in central Poland. A large number of lignite lithotypes, grouped in four lithotype associations, are distinguished: xylitic, detritic, xylo-detritic and detro-xylitic lithotype associations, which show various structures. Each lithotype association was produced under specific peat-forming environmental conditions. In the case of the lignite seams under study they represent all the main environments that are known from Neogene mires, i.e.: fen or open water, bush moor, wet forest swamp and dry forest swamp. For a simple and practical description in the field of both the lignite sections and borehole cores, a new codification for lignite lithotypes is proposed. It is based on the codification of clastic deposits (lithofacies). The practical value of the new lignite lithotype codification is examined in three vertical sections of the 1st Middle-Polish Lignite Seam.

  14. VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT CASCADES TOWARDS FILTRATION PLANT AND LOS ANGELES RESERVOIR - Los Angeles Aqueduct, Cascades Structures, Los Angeles, Los Angeles County, CA

  15. MAGAZINE E30. VIEW FROM BETWEEN 1ST AND 2ND BLAST WALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MAGAZINE E-30. VIEW FROM BETWEEN 1ST AND 2ND BLAST WALL LOOKING TO THE REAR OF THE MAGAZINE. - Naval Magazine Lualualei, Waikele Branch, Tunnel Magazine Type, Waikakalaua & Kipapa Gulches, Pearl City, Honolulu County, HI

  16. 14. Building 105, Facilities Engineering Building, 1830, interior, 1st floor, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Building 105, Facilities Engineering Building, 1830, interior, 1st floor, crib area of building, showing electrical and plumbing cribs, wall and ceiling detail, looking S. - Watervliet Arsenal, Building 105, South Broadway, on Hudson River, Watervliet, Albany County, NY

  17. 4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND VERTICAL BRACED DOUBLE ANGLES, DIAGONAL BRACING AND CROSS BRACED RAILING - Thirty-Sixth Street Bridge, Spanning Rabbit River, Hamilton, Allegan County, MI

  18. 62. Neg. No. F75A, Jun 18, 1930, INTERIORWAREHOUSE, 1ST FLOOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    62. Neg. No. F-75A, Jun 18, 1930, INTERIOR-WAREHOUSE, 1ST FLOOR, STORAGE OF AUTOMOBILE COMPONENTS - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA

  19. 1st International consensus guidelines for advanced breast cancer (ABC 1).

    PubMed

    Cardoso, F; Costa, A; Norton, L; Cameron, D; Cufer, T; Fallowfield, L; Francis, P; Gligorov, J; Kyriakides, S; Lin, N; Pagani, O; Senkus, E; Thomssen, C; Aapro, M; Bergh, J; Di Leo, A; El Saghir, N; Ganz, P A; Gelmon, K; Goldhirsch, A; Harbeck, N; Houssami, N; Hudis, C; Kaufman, B; Leadbeater, M; Mayer, M; Rodger, A; Rugo, H; Sacchini, V; Sledge, G; van't Veer, L; Viale, G; Krop, I; Winer, E

    2012-06-01

    The 1st international Consensus Conference for Advanced Breast Cancer (ABC 1) took place on November 2011, in Lisbon. Consensus guidelines for the management of this disease were developed. This manuscript summarizes these international consensus guidelines. PMID:22425534

  20. 19. Detail of brick courses 116, back side, between 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Detail of brick courses 1-16, back side, between 1st and 2nd windows from the right - Oklahoma State University, Boys Dormitory, Northwest corner of Hester Street & Athletic Avenue, Stillwater, Payne County, OK

  1. 20. Detail of brick courses 4675, back side, between 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. Detail of brick courses 46-75, back side, between 1st and 2nd windows from the right - Oklahoma State University, Boys Dormitory, Northwest corner of Hester Street & Athletic Avenue, Stillwater, Payne County, OK

  2. 45. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Turn span from SE. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  3. 46. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Overall view, from S. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  4. 28. ENGINE CLUSTER OF 1ST STAGE OF A SATURN I ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. ENGINE CLUSTER OF 1ST STAGE OF A SATURN I ROCKET ENGINE LOCATED ON NORTH SIDE OF STATIC TEST STAND. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

  5. BLOEDNER MONUMENT (32ND INDIANA, 1ST GERMAN MONUMENT), SECTION C, FRONT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BLOEDNER MONUMENT (32ND INDIANA, 1ST GERMAN MONUMENT), SECTION C, FRONT ELEVATION DETAIL OF GERMAN TEXT. VIEW TO NORTHEAST. - Cave Hill National Cemetery, 701 Baxter Avenue, Louisville, Jefferson County, KY

  6. Draft Genome Sequence of a Thermophilic Cyanobacterium from the Family Oscillatoriales (Strain MTP1) from the Chalk River, Colorado

    PubMed Central

    Grogger, Melanie; Mraz, Megan; Veverka, Donald

    2016-01-01

    The draft genome (57.7% GC, 7,647,882 bp) of the novel thermophilic cyanobacterium MTP1 was determined by metagenomics of an enrichment culture. The genome shows that it is in the family Oscillatoriales and encodes multiple heavy metal resistances as well as the capacity to make exopolysaccharides. PMID:26893415

  7. Draft Genome Sequence of a Thermophilic Cyanobacterium from the Family Oscillatoriales (Strain MTP1) from the Chalk River, Colorado.

    PubMed

    Hallenbeck, Patrick C; Grogger, Melanie; Mraz, Megan; Veverka, Donald

    2016-01-01

    The draft genome (57.7% GC, 7,647,882 bp) of the novel thermophilic cyanobacterium MTP1 was determined by metagenomics of an enrichment culture. The genome shows that it is in the family Oscillatoriales and encodes multiple heavy metal resistances as well as the capacity to make exopolysaccharides. PMID:26893415

  8. 1st- and 2nd-order motion and texture resolution in central and peripheral vision

    NASA Technical Reports Server (NTRS)

    Solomon, J. A.; Sperling, G.

    1995-01-01

    STIMULI. The 1st-order stimuli are moving sine gratings. The 2nd-order stimuli are fields of static visual texture, whose contrasts are modulated by moving sine gratings. Neither the spatial slant (orientation) nor the direction of motion of these 2nd-order (microbalanced) stimuli can be detected by a Fourier analysis; they are invisible to Reichardt and motion-energy detectors. METHOD. For these dynamic stimuli, when presented both centrally and in an annular window extending from 8 to 10 deg in eccentricity, we measured the highest spatial frequency for which discrimination between +/- 45 deg texture slants and discrimination between opposite directions of motion were each possible. RESULTS. For sufficiently low spatial frequencies, slant and direction can be discriminated in both central and peripheral vision, for both 1st- and for 2nd-order stimuli. For both 1st- and 2nd-order stimuli, at both retinal locations, slant discrimination is possible at higher spatial frequencies than direction discrimination. For both 1st- and 2nd-order stimuli, motion resolution decreases 2-3 times more rapidly with eccentricity than does texture resolution. CONCLUSIONS. (1) 1st- and 2nd-order motion scale similarly with eccentricity. (2) 1st- and 2nd-order texture scale similarly with eccentricity. (3) The central/peripheral resolution fall-off is 2-3 times greater for motion than for texture.

  9. Treatment of the Secondary Defect on the First Metatarsophalangeal Joint Using the Medial Plantar Hallucal Artery Dorsal Perforator Flap.

    PubMed

    Zhang, Xu; Bai, Guangqi; Zhang, Zhihong; Chen, Chao; Yu, Yadong; Shao, Xinzhong

    2016-05-01

    Injuries or burns to the dorsum of the first metatarsophalangeal (MTP) joint may develop scar formation, resulting in hyperextension contracture. Surgical correction of the deformity often produces a secondary defect. The purpose of this study is to report on the use of the medial plantar hallucal artery dorsal perforator flap for the treatment of such defect. From February 2010 to June 2011, 16 patients were treated. The mean preoperative hyperextension of the first MTP joint was 48 degrees. The mean size of the defects was 3.6 × 6 cm. The mean flap size was 4 × 6.5 cm. The mean pedicle length was 4 cm. All flaps survived completely. Patient follow-up lasted a mean of 14 months. At the final follow-up, the mean hyperextension of the first MTP joint was 9 degrees. After surgery, the mean Foot Function Index improved from 62 to 7. Almost all patients were satisfied with the results. Transferring the medial plantar hallucal artery dorsal perforator flap is a useful and reliable technique for the reconstruction of the secondary defect on the first MTP joint. PMID:25275474

  10. PREFACE: 1st Franco-Algerian Workshop on Neutrino Physics

    NASA Astrophysics Data System (ADS)

    Mebarki, N.; Mimouni, J.; Vanucci, F.; Aissaoui, H.

    2015-04-01

    The first Franco-Algerian workshop on neutrino physics was held on 22-23 October 2013 at the University of Mentouri, Constantine, Algeria. It was jointly organized by the Laboratory of Mathematical and Subatomic Physics (LPMS) and the Direction of Scientific Research (DGRSTD) for the Algerian side, and for the French part by the IN2P3, CNRS and CEA IRFU. It is one of a series of international scientific meetings organized every two years by the LPMS at Constantine on high energy physics (theoretical, nuclear physics, classical and quantum cosmology, astrophysics, mathematical physics and quantum computing etc...) to maintain a high quality in scientific research and education at Algerian universities. This specific meeting brought together experts in particle physics, astrophysics and cosmology from France and Algeria. It touched upon several theoretical, phenomenological as well as experimental aspects of the neutrinos. The workshop participants were mostly young researchers from many universities and research institutes in Algeria. The physics of neutrinos is a very active field in particle physics, hence the importance for the High Energy community in Algeria to gain expertise in this ''strategic'' area at the intersection of various topics in theoretical physics and high energy astrophysics (SM physics, CP violation, in general, SNe explosions, baryogenesis...). The neutrino proposed by Pauli back in 1930 as a ''desperate remedy'' to save the law of energy conservation in beta decay had a bright early history. Discovered in 1956 in the Cowan-Reines experiment despite all odds, this elusive particle which enabled us to understand the chiral nature of the weak interactions which later lead to the electro-weak unification finally appears to hold a key role in understanding subatomic physics as well as the structure and structuration of the Universe. It is also, after the discovery of the Higgs particle at the LHC in 2012, the only grey area left today in the

  11. Camphene, a Plant Derived Monoterpene, Exerts Its Hypolipidemic Action by Affecting SREBP-1 and MTP Expression.

    PubMed

    Vallianou, Ioanna; Hadzopoulou-Cladaras, Margarita

    2016-01-01

    The control of hyperlipidemia plays a central role in cardiovascular disease. Previously, we have shown that camphene, a constituent of mastic gum oil, lowers cholesterol and triglycerides (TG) in the plasma of hyperlipidemic rats without affecting HMG-CoA reductase activity, suggesting that its hypocholesterolemic and hypotriglyceridemic effects are associated with a mechanism of action different than that of statins. In the present study, we examine the mechanism by which camphene exerts its hypolipidemic action. We evaluated the effect of camphene on the de novo synthesis of cholesterol and TG from [14C]-acetate in HepG2 cells, along with the statin mevinolin. Camphene inhibited the biosynthesis of cholesterol in a concentration-dependent manner, and a maximal inhibition of 39% was observed at 100 μM while mevinolin nearly abolished cholesterol biosynthesis. Moreover, treatment with camphene reduced TG by 34% and increased apolipoprotein AI expression. In contrast, mevinolin increased TG by 26% and had a modest effect on apolipoprotein AI expression. To evaluate the mode of action of camphene, we examined its effects on the expression of SREBP-1, which affects TG biosynthesis and SREBP-2, which mostly affects sterol synthesis. Interestingly, camphene increased the nuclear translocation of the mature form of SREBP-1 while mevinolin was found to increase the amount of the mature form of SREBP-2. The effect of camphene is most likely regulated through SREBP-1 by affecting MTP levels in response to a decrease in the intracellular cholesterol. We propose that camphene upregulates SREBP-1 expression and MTP inhibition is likely to be a probable mechanism whereby camphene exerts its hypolipidemic effect. PMID:26784701

  12. Camphene, a Plant Derived Monoterpene, Exerts Its Hypolipidemic Action by Affecting SREBP-1 and MTP Expression

    PubMed Central

    Vallianou, Ioanna; Hadzopoulou-Cladaras, Margarita

    2016-01-01

    The control of hyperlipidemia plays a central role in cardiovascular disease. Previously, we have shown that camphene, a constituent of mastic gum oil, lowers cholesterol and triglycerides (TG) in the plasma of hyperlipidemic rats without affecting HMG-CoA reductase activity, suggesting that its hypocholesterolemic and hypotriglyceridemic effects are associated with a mechanism of action different than that of statins. In the present study, we examine the mechanism by which camphene exerts its hypolipidemic action. We evaluated the effect of camphene on the de novo synthesis of cholesterol and TG from [14C]-acetate in HepG2 cells, along with the statin mevinolin. Camphene inhibited the biosynthesis of cholesterol in a concentration-dependent manner, and a maximal inhibition of 39% was observed at 100 μM while mevinolin nearly abolished cholesterol biosynthesis. Moreover, treatment with camphene reduced TG by 34% and increased apolipoprotein AI expression. In contrast, mevinolin increased TG by 26% and had a modest effect on apolipoprotein AI expression. To evaluate the mode of action of camphene, we examined its effects on the expression of SREBP-1, which affects TG biosynthesis and SREBP-2, which mostly affects sterol synthesis. Interestingly, camphene increased the nuclear translocation of the mature form of SREBP-1 while mevinolin was found to increase the amount of the mature form of SREBP-2. The effect of camphene is most likely regulated through SREBP-1 by affecting MTP levels in response to a decrease in the intracellular cholesterol. We propose that camphene upregulates SREBP-1 expression and MTP inhibition is likely to be a probable mechanism whereby camphene exerts its hypolipidemic effect. PMID:26784701

  13. Traumatic Floating 1st Metacarpal in a 14-Year-Old Boy Managed by Close Reduction and Thumb Spica Immobilization: A Rare Case Report

    PubMed Central

    Tyagi, Himanshu Ravindra; Kamat, Nandan; Wajekar, Sagar; Mandalia, Saumil H

    2014-01-01

    Introduction: Double dislocation of thumb metacarpal (MC) is a rare injury which may be secondarily complicated by growth plate injury in children. The management of floating 1st MC is also controversial since the treatment ranges from simple reduction to complex reconstruction surgeries. It is also important to understand the long-term results of different management strategies (close reduction, K-wire fixation, ligament reconstruction) as any residual stiffness or instability of thumb may result in severe disability of the hand. Case Report: A 14-year-old boy with an alleged history of injury to the thumb due to a fall. The postulated mechanism of injury was forced hyperextension of thumb and axial loading of hand in the prone position. On examination, there was prominent bony swelling over the dorsal aspect of carpometacarpal (CMC) and metacarpophalangeal (MCP) joints which was very tender with diffuse swelling over entire thumb. X-ray showed dorsal dislocation of both MCP and CMC joints, without any fracture (bony avulsion) or volar plate avulsion. Treatment was by way of closed reduction performed by axial traction followed by forced flexion at MCP joint with continuous pressure over the dorsal aspect of the joint. The reduction of CMC joint was done by direct pressure over the dorsal aspect and full abduction of thumb. Following reduction, the thumb was immobilized in a thumb spica. Conclusion: Thus, we conclude it is possible to manage a case of floating 1st MC by closed reduction and immobilization, using proper reduction technique. However, a careful clinical and radiological assessment should be done beforehand for signs of bony injury or ligamentous instability. PMID:27299001

  14. Monitoring North Korea Explosions: Status and Result of 1st and 2nd Tests (Invited)

    NASA Astrophysics Data System (ADS)

    Chi, H.; Lee, H.; Shin, J.; Park, J.; Sheen, D.; Kim, G.; Che, I.; Lim, I.; Kim, T.

    2009-12-01

    Through data exchanging with China, Russia and Japan, KIGAM could monitor North Korea explosion tests in near real time with azimuthal full coverage from the test site. Except for the East Sea (Japan Sea) side, the seismic stations are distributed uniformly along the boundaries of North Korea and adjacent countries, and only stations with the distance of 200 to 550 Km from the test site were considered. Irrespective of azimuthal directions of stations from the test site, the conventional discrimination, Pn/Lg spectral ratio clearly showed that both tests were explosion. But mb-Ms discrimination did not show apparently the known pattern of explosion for both tests. Body wave magnitude, mb(Pn) of 2nd test, which was evaluated as 4.5 by KIGAM, varies with directional location of stations widely from 4.1 to 5.2. The magnitude obtained from Lg, mb(Lg), showed narrow variation between 4.3 to 4.7 with the average of 4.5. In the case of 1st test, both mb(Pn) and mb(Lg) showed equivalently large variation with directional station location. The error ellipses of epicentral determination of test site for 1st and 2nd tests showed almost identical pattern if they were separately calculated with the same configuration of stations. But the combined use of 1st and 2nd test data showed that 2nd test site was moved approximately 2 Km westward from 1st site. The cut-off frequencies of P wave of 1st and 2nd tests showed no or negligible difference even though the estimated yield of 2nd test were much larger than that of 1st one. The ratio of 1st and 2nd P-wave amplitudes showed from 2 to 3.1 times. Correspondingly the estimated energy or yield were ranged from 4 to roughly 10 times. KIGAM evaluated the yield of 2nd test were 8 times in the average larger than that of 1st one.

  15. First Carpometacarpal Joint Dislocation and Review of Literatures

    PubMed Central

    Lahiji, Farivar; Zandi, Reza; Maleki, Arash

    2015-01-01

    Dislocation of the first carpometacarpal (CMC) is a rare occurrence. Treatment of this dislocation varies from closed reduction and casting to ligament repair. Neglected dislocation or incomplete reduction of the 1st CMC cause chronic instability and painful arthritis, muscle imbalance and decreased grip force. In our study 6 patients is evaluated that were visited in less than 24 hours from their injury. All were primarily reduced and except one patient later injured ligament were repaired. All patient after 6 months had normal range of motion without pain and they had not any complaint. Stability at the 1st CMC joint is dependent on static and dynamic forces. However, dislocation of the 1st CMC occur rare, but important function of the thumb specially in gripping and grasping makes it a significant problem. Injured ligament should repair for increased stability of 1st CMC joint, because neglected dislocation or incomplete reduction cause chronic instability and painful arthritis. PMID:26550598

  16. How Many Attempts Until Success in Some Core 1st. Year Disciplines?

    ERIC Educational Resources Information Center

    Fernandes, Graça Leão; Andrade e Silva, João; Lopes, Margarida Chagas

    2012-01-01

    Due to a general development in education brought about by democracy, Portugal has witnessed tremendous development in Higher Education (HE) since the beginning of the 1980s. Nevertheless, the percentage of graduates among the Portuguese population still ranks far below most European countries. This is why academic performance in HE 1st cycle…

  17. 130. Post1911. Photograph labeled, 'SEASON 1913. CAPTAIN, 1st MATE, SUPT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    130. Post-1911. Photograph labeled, 'SEASON 1913. CAPTAIN, 1st MATE, SUPT AND STOREKEEPER, A.P. ASS'N CANNERY, SHIP STAR OF ALASKA.' View forward from mizzenmast, post side. - Ship BALCLUTHA, 2905 Hyde Street Pier, San Francisco, San Francisco County, CA

  18. First-Generation College Students' 1st-Year College Experiences: Challenges Attending a Private University

    ERIC Educational Resources Information Center

    Reid, Josephine

    2013-01-01

    First-generation college students (FGCS) face challenges when switching from high school to college and during their 1st-year in college. Additionally, FGCS may have difficulty understanding the steps required to prepare for and enroll in postsecondary education. The social capital theory examines support of social, academic, and cultural networks…

  19. 25. PRIMARY POWER TRANSMISSION BELT HOLES IN 1st FLOOR MILL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. PRIMARY POWER TRANSMISSION BELT HOLES IN 1st FLOOR MILL NO. 1 CEILING. WATER-POWERED MACHINERY LOCATED IN BASEMENT RAN LEATHER BELTS THROUGH THESE HOLES. POWER WAS THEN TRANSMITTED TO SHAFTS AND PULLEYS TO RUN MACHINERY ON MILL FLOORS. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  20. 77 FR 22574 - Filing Dates for the Washington Special Election In the 1st Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-16

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the Washington Special Election In the 1st Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special election. SUMMARY: Washington has...

  1. 76 FR 51366 - Filing Dates for the Oregon Special Election in the 1st Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-18

    ... information on these requirements, see Federal Register Notice 2009-03, 74 FR 7285 (February 17, 2009... November 8, 2011, and January 31, 2012, to fill the U.S. House seat in the 1st Congressional District... forms: One form to cover 2011 activity, labeled as the Year-End Report; and the other form to cover...

  2. Perceptual Narrowing of Linguistic Sign Occurs in the 1st Year of Life

    ERIC Educational Resources Information Center

    Palmer, Stephanie Baker; Fais, Laurel; Golinkoff, Roberta Michnick; Werker, Janet F.

    2012-01-01

    Over their 1st year of life, infants' "universal" perception of the sounds of language narrows to encompass only those contrasts made in their native language (J. F. Werker & R. C. Tees, 1984). This research tested 40 infants in an eyetracking paradigm and showed that this pattern also holds for infants exposed to seen language--American Sign…

  3. 26. Photograph of original Fresnel lens a 1st order fixed ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. Photograph of original Fresnel lens a 1st order fixed white light. (Installed 1874 and first illuminated Feb. 1, 1875. This is the only known photograph of this lens - - removed in 1929.)ca. 1918. - Block Island Southeast Light, Spring Street & Mohegan Trail at Mohegan Bluffs, New Shoreham, Washington County, RI

  4. Highlights of the 1st Student Symposium of the ISCB RSG UK

    PubMed Central

    Rahman, Farzana; Farmer, Rohit; Das, Sayoni; Vayani, Fatima; Hassan, Mehedi

    2015-01-01

    This short report summarises the scientific content and activities of a student-led event, the 1st student symposium by the UK Regional Student Group of the International Society for Computational Biology. The event took place on the 8th of October 2014. PMID:26998223

  5. 48. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms Latching mechanism, E end of turn span, view from N. Sarcone Photography, Columbus, MS. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  6. 42. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Copy of postcard ca. 1900. Copy owned and made by Jack Donnell, Columbus, Ms. Shows two-span steel truss, built by Phoenix Bridge Co. in 1878. Negative copied by: Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  7. 49. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    49. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Top of pier and underside of w end of turn span. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  8. 47. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    47. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Latching mechanism, E end of turn span, viewed from W. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  9. The Course of Psychological Disorders in the 1st Year After Cancer Diagnosis

    ERIC Educational Resources Information Center

    Kangas, Maria; Henry, Jane L.; Bryant, Richard A.

    2005-01-01

    This study investigated the relationship between acute stress disorder (ASD) and posttraumatic stress disorder (PTSD) and comorbid anxiety, depressive, and substance use disorders over the first 12-month period following a cancer diagnosis. Individuals recently diagnosed with 1st onset head and neck or lung malignancy were assessed for ASD within…

  10. Education and Research in the SEENET-MTP Regional Framework for Higher Education in Physics

    NASA Astrophysics Data System (ADS)

    Constantinescu, R.; Djordjevic, G. S.

    2010-01-01

    Southeastern European countries undergo significant changes in the demand/supply ratio on the labour market and in the structure of professional competences that are necessary for undertaking a professional activity. In addition, brain-drain process and decrease of interest for a career in basic sciences put many challenges for our community. Consequently, based on the activity of the Southeastern European Network in Mathematical and Theoretical Physics (SEENET MTP Network) in connecting groups and persons working in mathematics and theoretical physics, we investigate specific qualifications recognized in these fields in all the countries from the region, and the related competences necessary for practising the respective occupations. A list of new possible occupations will be promoted for inclusion in the National Qualifications Register for Higher Education. Finally, we analyze the vision existing in this region on the higher education qualifications against the European vision and experience, in particular in training of Master students, PhD students, and senior teaching and research staff through the Network, i.e. multilateral and bilateral programs.

  11. Molecular cloning and characterisation of in vitro immune response against astacin-like metalloprotease Ace-MTP-2 from Ancylostoma ceylanicum.

    PubMed

    Bąska, Piotr; Wiśniewski, Marcin; Krzyżowska, Małgorzata; Długosz, Ewa; Zygner, Wojciech; Górski, Paweł; Wędrychowicz, Halina

    2013-04-01

    Ancylostoma ceylanicum belongs to the group of parasites commonly known as hookworms, blood-sucking nematodes which infect around 576 million people and hundreds of millions of animals. The interactions between these parasites and host immune systems are complicated and yet to be determined. Hookworm infections are usually long lasting and recurrent, due in part to their ability to synthesize macromolecules capable of modulating the host immune response. The interaction of parasite proteins with host immune systems has been proven, but so far there is no data describing the influence of astacin-like metalloproteases (expressed among different parasitic nematodes) on the human immune system. The cDNA encoding A. ceylanicum metalloprotease 2 (Ace-mtp-2) was cloned using RACE-PCR. Computational analysis was used to examine the immunogenicity and recombinant Ace-MTP-2 was used to investigate its influence on human THP-1 monocytes and macrophages. The Ace-mtp-2 gene encodes an astascin-like metalloprotease, with a theoretical molecular mass of 26.7 kDa. The protease has a putative signal peptide, 11 potential phosphorylation sites, and two disulfide bridges revealed by computational analysis. Maximal expression of Ace-mtp-2 by A. ceylanicum occurs in the adult stage of the parasite, and Western blot indicates the secretory nature of the protease. This suggests the protease is working at the host-parasite interface and would likely be exposed to the hosts immune response. Recombinant protein were expressed in Escherichia coli and Pichia pastoris. Recombinant Ace-MTP-2 amplified the in vitro release of TNFα and induced release of IFNγ by lipopolysaccharide activated THP-1 macrophages. The presence of Ace-MTP-2 in secretory products of the adult parasite and the induction of IFNγ release may suggest an important role for Ace-MTP-2 in host-parasite interactions since IFNγ is suggested to be responsible for the protective immune response against adult hookworms. PMID

  12. Enhanced cadmium accumulation and tolerance in transgenic tobacco overexpressing rice metal tolerance protein gene OsMTP1 is promising for phytoremediation.

    PubMed

    Das, Natasha; Bhattacharya, Surajit; Maiti, Mrinal K

    2016-08-01

    One of the most grievous heavy metal pollutants in the environment is cadmium (Cd), which is not only responsible for the crop yield loss owing to its phytotoxicity, but also for the human health hazards as the toxic elements usually accumulate in the consumable parts of crop plants. In the present study, we aimed to isolate and functionally characterize the OsMTP1 gene from indica rice (Oryza sativa L. cv. IR64) to study its potential application for efficient phytoremediation of Cd. The 1257 bp coding DNA sequence (CDS) of OsMTP1 encodes a ∼46 kDa protein belonging to the cation diffusion facilitator (CDF) or metal tolerance/transport protein (MTP) family. The OsMTP1 transcript in rice plant was found to respond during external Cd stress. Heterologous expression of OsMTP1 in tobacco resulted in the reduction of Cd stress-induced phytotoxic effects, including growth inhibition, lipid peroxidation, and cell death. Compared to untransformed control, the transgenic tobacco plants showed enhanced vacuolar thiol content, indicating vacuolar localization of the sequestered Cd. The transgenic tobacco plants exhibited significantly higher biomass growth (2.2-2.8-folds) and hyperaccumulation of Cd (1.96-2.22-folds) compared to untransformed control under Cd exposure. The transgenic plants also showed moderate tolerance and accumulation of arsenic (As) upon exogenous As stress, signifying broad substrate specificity of OsMTP1. Together, findings of our research suggest that the transgenic tobacco plants overexpressing OsMTP1 with its hyperaccumulating activity and increased growth rate could be useful for future phytoremediation applications to clean up the Cd-contaminated soil. PMID:27214086

  13. Regional Observations of North Korea Explosions: 1st and 2nd Tests

    NASA Astrophysics Data System (ADS)

    Chi, Heon Cheol; Shin, Jin Soo; Lee, Hee-Il; Park, Jung Ho; Sheen, Dong-Hoon; Kim, Geunyoung; Kim, Tea Sung; Che, Il-Young; Lim, In-Seub

    2010-05-01

    Through data exchanging with China, Russia and Japan, KIGAM could monitor North Korea explosion tests in near real time with azimuthally full coverage from the test site. Except for the East Sea (Japan Sea) side, the seismic stations are distributed uniformly along the boundaries of North Korea and adjacent countries. The error ellipses of epicentral determination of test site for 1st and 2nd tests showed almost identical pattern if they were separately calculated with the same configuration of stations. But the combined use of the 1st and the 2nd test data showed that the 2nd test site was moved approximately 2 Km westward from 1st site. The Pn/Lg spectral ratio clearly discriminate these events from two nearby natural earthquakes above 4 Hz. Full moment tensor inversion also indicate the 2nd test had a very large isotropic component. But mb-Ms discrimination, which has been considered one of the most reliable discriminants for separating explosions and earthquakes, did not show apparently the known pattern of explosion for both tests. Body wave magnitude, mb(Pn) of the 2nd test, which was evaluated as 4.5 by KIGAM, varies with directional location of stations widely from 4.1 to 5.2. The magnitude obtained from Lg, mb(Lg), showed narrow variation between 4.3 to 4.7 with the average of 4.5. In the case of both 1st and 2nd tests, both mb(Pn) and mb(Lg) showed equivalently large variation with directional station location. These variations are mainly due to lateral variation of crustal structures surrounding the test site. Remarkably mb(Lg) showed very linear relationship with mb(Pn). By considering attenuation characteristics according to the propagation path, the variations could be effectively reduced. The cut-off frequencies of P wave of both tests showed no or negligible difference even though the estimated yield of the 2nd test were much larger than that of the 1st one. The ratio of P-wave amplitudes of two tests showed from 2 to 3.1 times. Correspondingly the

  14. Joint swelling

    MedlinePlus

    Swelling of a joint ... Joint swelling may occur along with joint pain . The swelling may cause the joint to appear larger or abnormally shaped. Joint swelling can cause pain or stiffness. After an ...

  15. Idaho National Laboratory Quarterly Performance Analysis - 1st Quarter FY2015

    SciTech Connect

    Mitchell, Lisbeth A.

    2015-03-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 73 reportable events (27 from the 1St Qtr FY-15 and 46 from the prior three reporting quarters), as well as 38 other issue reports (including nine not reportable events and Significant Category A and B conditions reported during the1st Qtr FY-15) identified at INL during the past 12 months.

  16. 46. NORTH END OF MILL NO. 2, 1st FLOOR, BELOW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. NORTH END OF MILL NO. 2, 1st FLOOR, BELOW PICKER AND CLOTH ROOM AREA. FUNCTION OF THIS SPACE UNKNOWN AT PRESENT. NOTE THAT EYE BEAM REPLACES ORIGINAL WALL OF 1892 PICKER HOUSE. CENTER (OR LEFT) DOOR IS ENTRY TO MILL NO. 2. RIGHT DOOR IS ENTRY TO 1892 NAPPER ROOM. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  17. 1st Central and Eastern European Proteomic Conference and 3rd Czech Proteomic Conference.

    PubMed

    Kovarova, Hana; Gadher, Suresh Jivan; Archakov, Alexander

    2008-02-01

    The 1st Central and Eastern European Proteomic Conference was organized together with the 3rd Czech Proteomic Conference in the TOP Hotel, Prague in the Czech Republic from the 29th to the 31st October, 2007. The aim was to strengthen links with scientists from Central and Eastern Europe including Russia, which until now have been weak or nonexistent, and to highlight the emergence of excellent proteomic studies from various countries, which until now were not visible. PMID:18282121

  18. 7. Photographic copy of original construction drawing, ELECTRICAL 1ST AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photographic copy of original construction drawing, ELECTRICAL 1ST AND 2ND FLOOR PLANS, SHEET 10 of 11, DRAWING NO. 35-03-05 SF 5/1677, U.S. Army Engineer District, Detroit, Corps of Engineers, 9 June, 1959, on file Selfridge Base Museum. - Selfridge Field, Building No. 1041, West of E Street, north of D Street, Mount Clemens, Macomb County, MI

  19. Ruthenium indenylidene “1st generation” olefin metathesis catalysts containing triisopropyl phosphite

    PubMed Central

    Guidone, Stefano; Nahra, Fady; Slawin, Alexandra M Z

    2015-01-01

    Summary The reaction of triisopropyl phosphite with phosphine-based indenylidene pre-catalysts affords “1st generation” cis-complexes. These have been used in olefin metathesis reactions. The cis-Ru species exhibit noticeable differences with the trans-Ru parent complexes in terms of structure, thermal stability and reactivity. Experimental data underline the importance of synergistic effects between phosphites and L-type ligands. PMID:26425210

  20. 1st International Symposium on Stress-Associated RNA Granules in Human Disease and Viral Infection

    PubMed Central

    Banfield, Bruce W.; Mouland, Andrew J.; McCormick, Craig

    2014-01-01

    In recent years, important linkages have been made between RNA granules and human disease processes. On June 8-10 of this year, we hosted a new symposium, dubbed the 1st International Symposium on Stress-Associated RNA Granules in Human Disease and Viral Infection. This symposium brought together experts from diverse research disciplines ranging from cancer and neuroscience to infectious disease. This report summarizes speaker presentations and highlights current challenges in the field. PMID:25256393

  1. 43. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    43. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Copy of photo 1900. Shows 1878 M&O RR bridge. The steamboat, 'Gopher,' in foreground, was an archeological survey vessel from the Franklin Institute in Philadelphia. Published in Art in Mississippi (1901). Credit: Copied from print in Lowndes Co. Public Library by Sarcone Photography, Columbus, Ms. 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  2. 44. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Detail from Camille Drie's map: A Bird's Eye View of Columbus, Mississippi ca. 1875-76. Shows M&O RR bridge before the Phoenix Bridge Co. erected iron truss spans in 1878. Credit: Photostat of map in Lowndes Co. Public Library Sarcone Photography, Columbus, Ms. 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  3. Magnetic field induced 1st order transitions: Recent studies, and some new concepts

    NASA Astrophysics Data System (ADS)

    Chaddah, P.

    2015-05-01

    Phase transitions are caused by varying temperature, or pressure, or magnetic field. The observation of 1st order magneto-structural transitions has created application possibilities based on magnetoresistance, magnetocaloric effect, magnetic shape memory effect, and magneto-dielectric effect. Magnetic field induced transitions, and phase coexistence of competing magnetic phases down to the lowest temperature, gained prominence over a decade ago with theoretical models suggesting that the ground state is not homogeneous. Researchers at Indore pushed an alternative view that this phase coexistence could be due to glasslike "kinetic arrest" of a disorder-broadened first-order magnetic transition between two states with long-range magnetic order, resulting in phase coexistence down to the lowest temperatures. The CHUF (cooling and heating in unequal field) protocol created at Indore allows the observation of `devitrification', followed by `melting'. I show examples of measurements establishing kinetic arrest in various materials, emphasizing that glasslike arrest of 1st order magnetic transitions may be as ubiquitous as glass formation following the arrest of 1st order structural transitions.

  4. The radiation tolerance of MTP and LC optical fibre connectors to 500 kGy(Si) of gamma radiation

    NASA Astrophysics Data System (ADS)

    Hall, D. C.; Hamilton, P.; Huffman, B. T.; Teng, P. K.; Weidberg, A. R.

    2012-04-01

    The LHC luminosity upgrade, known as the High Luminosity LHC (HL-LHC), will require high-speed optical links to read out data from the detectors. The optical fibre connectors contained within such a link must have a small form factor and be capable of operating in the harsh radiation environment at the HL-LHC. MTP ribbon fibre connectors and LC single fibre connectors were exposed to 500 kGy(Si) of gamma radiation and their radiation hardness was investigated. Neither type of connector exhibited evidence for any significant radiation damage and both connectors could be qualified for use at HL-LHC detectors.

  5. A Further Study of High Air Pollution Episodes in Taiwan Using the Microwave Temperature Profiler (MTP-5HE)

    NASA Astrophysics Data System (ADS)

    Chang, Che-Ming; Chang, Long-Nan; Hsiao, Hui-Chuan; Lu, Fang-Chuan; Shieh, Ping-Fei; Chen, Chi-Nan; Lu, Shish-Chong

    In the metropolitan areas of Taiwan with high population density, heavy traffic, and/or zones of heavy industries, serious air pollution episodes may occur during stable weather conditions. The information of mixing height is therefore essential to the air pollution control in this area. In this study, diurnal variation of the mixing height derived using the newly established EPA-Taiwan microwave temperature profiler (MTP-5HE) and that obtained through the CWB soundings are compared. The relationships between the air quality and the diurnal variation of the mixing height is discussed during different air pollution episodes.

  6. Joint U.S./Japan Conference on Adaptive Structures, 1st, Maui, HI, Nov. 13-15, 1990, Proceedings

    NASA Technical Reports Server (NTRS)

    Wada, Ben K. (Editor); Fanson, James L. (Editor); Miura, Koryo (Editor)

    1991-01-01

    The present volume of adaptive structures discusses the development of control laws for an orbiting tethered antenna/reflector system test scale model, the sizing of active piezoelectric struts for vibration suppression on a space-based interferometer, the control design of a space station mobile transporter with multiple constraints, and optimum configuration control of an intelligent truss structure. Attention is given to the formulation of full state feedback for infinite order structural systems, robustness issues in the design of smart structures, passive piezoelectric vibration damping, shape control experiments with a functional model for large optical reflectors, and a mathematical basis for the design optimization of adaptive trusses in precision control. Topics addressed include approaches to the optimal adaptive geometries of intelligent truss structures, the design of an automated manufacturing system for tubular smart structures, the Sandia structural control experiments, and the zero-gravity dynamics of space structures in parabolic aircraft flight.

  7. A mutagenic study identifying critical residues for the structure and function of rice manganese transporter OsMTP8.1

    PubMed Central

    Chen, Xi; Li, Jiyu; Wang, Lihua; Ma, Gang; Zhang, Wei

    2016-01-01

    Rice (Oryza sativa) MTP8.1 (OsMTP8.1) is a tonoplast-localized manganese transporter of the cation diffusion facilitator family. Here we present a structure-function analysis of OsMTP8.1 based on the site-directed and random mutagenesis and complementation assays in manganese hypersensitive yeast, in combination with three-dimensional (3D) structure modeling based on the crystal structure of the Escherichia coli CDF family member, EcYiiP. Two metal-binding sites are conserved in OsMTP8.1 with EcYiiP, one is between transmembrane helices TM2 and TM5, the other is the cytoplasmic C-terminus. In addition to these two metal-binding sites, there may exist other Mn-binding sites such as that at the very end of the CTD. Two residues (R167 and L296) may play an important role for the hinge-like movement of CTDs. Several mutations such as E357A and V374D may affect dimer formation, and S132A may induce a conformational change, resulting in a loss of transport function or modification in metal selectivity. The N-terminus of OsMTP8.1 was not functional for Mn transport activity, and the real function of NTD remains to be investigated in the future. The findings of the present study illustrate the structure-function relationship of OsMTP8.1 in Mn transport activity, which may also be applied to other plant Mn-CDF proteins. PMID:27555514

  8. Hypolipidemic action of the SERM acolbifene is associated with decreased liver MTP and increased SR-BI and LDL receptors.

    PubMed

    Lemieux, Christian; Gélinas, Yves; Lalonde, Josée; Labrie, Fernand; Cianflone, Katherine; Deshaies, Yves

    2005-06-01

    This study aimed to identify the mechanisms of the hypolipidemic action of the selective estrogen receptor modulator (SERM) acolbifene (ACOL). Four weeks of treatment with ACOL reduced fasting and postprandial plasma triglycerides (TGs), an effect associated with lower VLDL-TG secretion rate (-25%), and decreased mRNA of microsomal triglyceride transfer protein (MTP; -29%). ACOL increased liver TG concentration (+100%) and amplified the feeding-induced increase in the master lipogenic regulators sterol-regulatory element binding protein-1a (SREBP-1a) and SREBP-1c. ACOL decreased total, HDL, and non-HDL cholesterol (CHOL) by 50%. SREBP-2 mRNA and HMG-CoA reductase activity were minimally affected by ACOL. However, in the fasted state, liver concentration of scavenger receptor class B type I (SR-BI) protein, but not mRNA, was 3-fold higher in ACOL-treated than in control animals and correlated with plasma HDL-CHOL levels (r = 0.80, P < 0.002). Liver LDL receptor (LDLR) protein, but not mRNA, was increased 2-fold by ACOL, independently of the nutritional status. This study demonstrates that ACOL possesses the unique ability among SERMs to reduce VLDL-TG secretion, likely by reducing MTP expression, and strongly suggests that the robust hypocholesterolemic action of ACOL is related to increased removal of CHOL from the circulation as a consequence of enhanced liver SR-BI and LDLR abundance. PMID:15741653

  9. Characterization of a 12-channel optical fiber ribbon cable with MTP array connector assembly for space flight environments

    NASA Astrophysics Data System (ADS)

    Ott, Melanie N.; Macmurphy, Shawn L.; Friedberg, Patricia R.

    2002-07-01

    Presented here is the second set of testing conducted by the Technology Validation Laboratory for Photonics at NASA Goddard Space Flight Center on the twelve optical fiber ribbon cable with MTP array connector for space flight environments. In the first set of testing the commercial 62.5/125 cable assembly was characterized using space flight parameters (published in SPIE Vol. 3440). The testing showed that the cable assembly would survive a typical space flight mission with the exception of a vacuum environment. Two enhancements were conducted to the existing technology to better suit the vacuum environment as well as the existing optoelectronics and increase the reliability of the assembly during vibration. The MTP assembly characterized here has a 100/140 optical commercial fiber and non outgassing connector and cable components. The characterization for this enhanced fiber optic cable assembly involved vibration, thermal and radiation testing. The data and results of this characterization study are presented which include optical in-situ testing.

  10. Cucumber metal tolerance protein CsMTP9 is a plasma membrane H⁺-coupled antiporter involved in the Mn²⁺ and Cd²⁺ efflux from root cells.

    PubMed

    Migocka, Magdalena; Papierniak, Anna; Kosieradzka, Anna; Posyniak, Ewelina; Maciaszczyk-Dziubinska, Ewa; Biskup, Robert; Garbiec, Arnold; Marchewka, Tadeusz

    2015-12-01

    Members of the plant metal tolerance protein (MTP) family have been classified into three major groups - Zn-CDF, Mn-CDF and Zn/Fe-CDF - however, the selectivity of most of the MTPs has not been confirmed yet. Cucumber gene CsMTP9 encoding a putative CDF transporter homologous to members of the Mn-CDF cluster is expressed exclusively in roots. The relative abundance of CsMTP9 transcript and protein in roots is significantly increased under Mn excess and Cd. Immunolocalization with specific antibodies revealed that CsMTP9 is a plasma membrane transporter that localizes to the inner PM domain of root endodermal cells. The plasma membrane localization of CsMTP9 was confirmed by the expression of the fusion proteins of GFP (green fluorescent protein) and CsMTP9 in yeast and protoplasts prepared from Arabidopsis cells. In yeast, CsMTP9 transports Mn(2+) and Cd(2+) via a proton-antiport mechanism with an apparent Km values of approximately 10 μm and 2.5 μm for Mn(2+) and Cd(2+) , respectively. In addition, CsMTP9 expression in yeast rescues the Mn- and Cd-hypersensitive phenotypes through the enhanced efflux of Mn(2+) and Cd(2+) from yeast cells. Similarly, the overexpression of CsMTP9 in A. thaliana confers increased resistance of plants to Mn excess and Cd but not to other heavy metals and leads to the enhanced translocation of manganese and cadmium from roots to shoots. These findings indicate that CsMTP9 is a plasma membrane H(+) -coupled Mn(2+) and Cd(2+) antiporter involved in the efflux of manganese and cadmium from cucumber root cells by the transport of both metals from endodermis into vascular cylinder. PMID:26485215

  11. The plant CDF family member TgMTP1 from the Ni/Zn hyperaccumulator Thlaspi goesingense acts to enhance efflux of Zn at the plasma membrane when expressed in Saccharomyces cerevisiae.

    PubMed

    Kim, Donggiun; Gustin, Jeffery L; Lahner, Brett; Persans, Michael W; Baek, Dongwon; Yun, Dae-Jin; Salt, David E

    2004-07-01

    To avoid metal toxicity, organisms have evolved mechanisms including efflux of metal ions from cells and sequestration into internal cellular compartments. Members of the ubiquitous cation diffusion facilitator (CDF) family are known to play an important role in these processes. Overexpression of the plant CDF family member metal tolerance protein 1 (MTP1) from the Ni/Zn hyperaccumulator Thlaspi goesingense (TgMTP1), in the Saccharomyces cerevisiaeDelta zinc resistance conferring (zrc)1Delta cobalt transporter (cot)1 double mutant, suppressed the Zn sensitivity of this strain. T. goesingense was found to contain several allelic variants of TgMTP1, all of which confer similar resistance to Zn in Deltazrc1Deltacot1. Similarly, MTP1 from various hyperaccumulator and non-accumulator species also confer similar resistance to Zn. Deltazrc1Deltacot1 lacks the ability to accumulate Zn in the vacuole and has lower accumulation of Zn after either long- or short-term Zn exposure. Expression of TgMTP1 in Deltazrc1Deltacot1 leads to further lowering of Zn accumulation and an increase in Zn efflux from the cells. Expression of TgMTP1 in a V-type ATPase-deficient S. cerevisiae strain also confers increased Zn resistance. In vivo and in vitro immunological staining of hemagglutinin (HA)-tagged TgMTP1::HA reveals the protein to be localized in both the S. cerevisiae vacuolar and plasma membranes. Taken together, these data are consistent with MTP1 functioning to enhance plasma membrane Zn efflux, acting to confer Zn resistance independent of the vacuole in S. cerevisiae. Transient expression in Arabidopsis thaliana protoplasts also reveals that TgMTP1::green fluorescent protein (GFP) is localized at the plasma membrane, suggesting that TgMTP1 may also enhance Zn efflux in plants. PMID:15225288

  12. Dipolar interactions and hydrogen bonding in supramolecular aggregates: understanding cooperative phenomena for 1st hyperpolarizability.

    PubMed

    Datta, Ayan; Pati, Swapan K

    2006-12-01

    Weak intermolecular forces like dipolar interactions and hydrogen-bonding lead to a variety of different packing arrangements of molecules in crystals and self-assemblies. Such differences in the arrangements change the extent of excitonic splitting and excitation spectra in the multichromophore aggregates. In this tutorial review, the role of such interactions in fine tuning the linear and 1st non-linear optical (NLO) responses in molecular aggregates are discussed. The non-additivity of these optical properties arise specifically due to such cooperative interactions. Calculations performed on dimers, trimers and higher aggregates for model systems provide insights into the interaction mechanisms and strategies to enhance the 1st hyperpolarizabilities of pi-conjugated molecular assemblies. Flexible dipole orientations in the alkane bridged chromophores show odd-even variations in their second-harmonic responses that are explained through their dipolar interactions in different conformations. Parameters for the optical applications of molecules arranged in constrained geometry, like in Calix[n]arene, have been elucidated. We also highlight the recent developments in this field of research together with their future prospects. PMID:17225890

  13. Autopsy as a tool for learning gross anatomy during 1st year MBBS

    PubMed Central

    Goyal, Parmod Kumar; Gupta, Monika; Kaur, Jaswinder

    2016-01-01

    Introduction: Embalmed cadavers are the primary tool for teaching anatomy. However, difficulties are encountered due to changed color/texture of organs, hardening of tissues, and smell of formaldehyde. To overcome these difficulties, dissections on a fresh human body were shown to the 1st year MBBS students, and their perception was noted. Materials and Methods: After taking universal precautionary measures, postmortem dissections were shown to students on voluntary donated bodies in the dissection hall, in addition to the traditional teaching on embalmed cadavers. Feedback was taken from students and faculty regarding the utility of these sessions. Results: Better appreciation of texture, orientation, location, and relations of organs in fresh body, integration of teaching, awareness of the process and laws related to body donations were the outcomes of the study. However, the smell and sight of blood was felt to be nauseating by some students, and some students were worried about the spread of infectious diseases. Conclusions: Visualizing single fresh body dissection during 1st year professional MBBS is recommended either on medicolegal autopsy or on voluntarily-donated bodies. PMID:27563594

  14. Mechanisms underlying hypertriglyceridemia in rats with monosodium L-glutamate-induced obesity: evidence of XBP-1/PDI/MTP axis activation.

    PubMed

    França, Lucas Martins; Freitas, Larissa Nara Costa; Chagas, Vinicyus Teles; Coêlho, Caio Fernando Ferreira; Barroso, Wermerson Assunção; Costa, Graciomar Conceição; Silva, Lucilene Amorim; Debbas, Victor; Laurindo, Francisco Rafael Martins; Paes, Antonio Marcus de Andrade

    2014-01-10

    Non-alcoholic fatty liver disease (NAFLD) is intimately associated with insulin resistance and hypertriglyceridemia, whereas many of the mechanisms underlying this association are still poorly understood. In the present study, we investigated the relationship between microsomal triglyceride transfer protein (MTP) and markers of endoplasmic reticulum (ER) stress in the liver of rats subjected to neonatal monosodium L-glutamate (MSG)-induced obesity. At age 120 days old, the MSG-obese animals exhibited hyperglycemia, hypertriglyceridemia, insulin resistance, and liver steatosis, while the control (CTR) group did not. Analysis using fast protein liquid chromatography of the serum lipoproteins revealed that the triacylglycerol content of the very low-density lipoprotein (VLDL) particles was twice as high in the MSG animals compared with the CTR animals. The expression of ER stress markers, GRP76 and GRP94, was increased in the MSG rats, promoting a higher expression of X-box binding protein 1 (XBP-1), protein disulfide isomerase (PDI), and MTP. As the XBP-1/PDI/MTP axis has been suggested to represent a significant lipogenic mechanism in the liver response to ER stress, our data indicate that hypertriglyceridemia and liver steatosis occurring in the MSG rats are associated with increased MTP expression. PMID:24333444

  15. Crystallization and preliminary X-ray diffraction studies of maleylacetate reductase from Rhizobium sp. strain MTP-10005

    SciTech Connect

    Fujii, Tomomi; Goda, Yuko; Yoshida, Masahiro; Oikawa, Tadao; Hata, Yasuo

    2008-08-01

    Maleylacetate reductase from Rhizobium sp. strain MTP-10005 has been crystallized using the sitting-drop vapour-diffusion method and microseeding. The crystals contained one dimeric molecule per asymmetric unit and diffracted to 1.79 Å resolution. Maleylacetate reductase (EC 1.3.1.32), which catalyzes the reduction of maleylacetate to 3-oxoadipate, plays an important role in the aerobic microbial catabolism of resorcinol. The enzyme has been crystallized at 293 K by the sitting-drop vapour-diffusion method supplemented with a microseeding technique, using ammonium sulfate as the precipitating agent. The crystal belonged to the monoclinic space group C2, with unit-cell parameters a = 56.85, b = 121.13, c = 94.09 Å, β = 101.48°, and contained one dimeric molecule in the asymmetric unit. It diffracted to 1.79 Å resolution.

  16. Small-scale gravity waves in ER-2 MMS/MTP wind and temperature measurements during CRYSTAL-FACE

    NASA Astrophysics Data System (ADS)

    Wang, L.; Alexander, M. J.; Bui, T. P.; Mahoney, M. J.

    2005-11-01

    ER-2 MMS and MTP wind and temperature measurements during the CRYSTAL-FACE campaign in July 2002 were analyzed to retrieve information on small scale gravity waves (GWs) at aircraft's flight level. For a given flight segment, the S-transform was used to search for and identify small horizontal scale GW events, and to estimate the apparent horizontal wavelengths of the events. The horizontal propagation directions of the events were determined using the Stokes parameters method combined with the cross S-transform analysis. The MTP temperature gradient method was used to determine the vertical wavelengths of the events. GW momentum fluxes were calculated from the cross S-transform. Other wave parameters such as intrinsic frequencies were calculated using the GW dispersion relation. More than 100 GW events were identified. They were generally short horizontal scale and high frequency waves with λz of ~5 km and λh generally shorter than 20 km. Their intrinsic propagation directions were predominantly toward the east, whereas their ground-based propagation directions were primarily toward the west. Among the events, ~20% of them had very short horizontal wavelength (<10 km), very high intrinsic frequency (ω/N≥0.8), and relatively small momentum fluxes, and thus they were likely trapped in the lower stratosphere. The averaged magnitude of vertical flux of horizontal momentum was ~0.026 kg m-1 s-2, and the maximum magnitude was ~0.13 kg m-1 s-2. Using the estimated GW parameters and the background winds and stabilities from the NCAR/NCEP reanalysis data, we were able to trace the sources of the events using a simple reverse ray-tracing. More than 70% of the events were traced back to convective sources in the troposphere, and the sources were generally located upstream to the events. Finally, a probability density function of GW cooling rates was obtained in this study, which may be used in cirrus cloud models.

  17. EDITORIAL: The 1st International Conference on Nanomanufacturing (NanoMan2008) The 1st International Conference on Nanomanufacturing (NanoMan2008)

    NASA Astrophysics Data System (ADS)

    Luo, Jack Jiqui; Fang, Fengzhou

    2009-05-01

    Nanomanufacturing is an emerging technology in the field of synthesis of nanomaterials, manufacture of nanodevices, nanosystems and the relevant characterization technologies, and will greatly impact our society and environment: speeding up scientific discovery, technological development, improving healthcare and living standards and slowing down the exhaustion of energy resources, to name but few. The 1st International Conference on Nanomanufacturing (NanoMan2008) was held on the 13-16 July 2008 in Singapore in conjunction with ThinFilm2008 (The 4th International Conference on Technological Advances of Thin Films & Surface Coatings). Approximately 140 delegates from all over the world have participated in the conference and presented their latest discoveries and technological developments. The main focuses of the conference were modern nanomanufacturing by laser machining, focused ion beam fabrication, nano/micro-molding/imprinting, nanomaterial synthesis and characterization, nanometrology and nano/microsystems fabrication and characterization. There was also great interest in applications of nanomanufacturing technologies in traditional areas such as free form machining, polishing and grinding with nano-scale precision and the smoothness of surfaces of objects, and applications in space exploration, military and medicine. This special issue is devoted to NanoMan2008 with a collection of 9 invited talks presented at the conference, covering all the topics of nanomanufacturing technology and development. These papers have been upgraded by the authors with new results and discoveries since the preparation of the conference manuscripts, hence presenting the latest developments. We would like to take this opportunity to thank all the delegates who attended the conference and made the conference successful, and to the authors who contributed papers to this special issue. Thanks also go to the conference committee for their efforts and devotion to the conference. We

  18. Correlates and Phenomenology of 1st and 3rd Person Memories

    PubMed Central

    Sutin, Angelina R.; Robins, Richard W.

    2010-01-01

    The present research addressed fundamental questions about the visual perspective of autobiographical memories: Are stable personality characteristics associated with visual perspective? Does visual perspective influence the memory's phenomenological qualities? Participants in Study 1 (N = 1,684) completed individual-difference measures and indicated the perspective from which they generally retrieve memories. Participants in Study 2 (N = 706) retrieved a memory from their natural or manipulated perspective, rated its phenomenology, and completed the same individual-difference measures. Dissociation and anxiety were associated with 3rd person retrieval style; the Big Five personality traits were primarily unrelated to perspective. Compared to 3rd person memories, naturally-occurring 1st person memories were higher on Vividness, Coherence, Accessibility, Sensory Detail, Emotional Intensity, and Time Perspective and lower on Distancing; manipulating perspective eliminated these differences. Visual perspective is associated with clinically-relevant constructs and, although associated with the memory's phenomenology, perspective does not shape it. PMID:20665336

  19. Meeting report for the 1st skin microbiota workshop, boulder, CO October 15-16 2012

    PubMed Central

    2014-01-01

    This report details the outcome of the 1st Skin Microbiota Workshop, Boulder, CO, held on October 15th-16th 2012. The workshop was arranged to bring Department of Defense personnel together with experts in microbial ecology, human skin physiology and anatomy, and computational techniques for interrogating the microbiome to define research frontiers at the intersection of these important areas. The workshop outlined a series of questions and created several working groups to address those questions, specifically to promote interdisciplinary activity and potential future collaboration. The US Army provided generous grant support and the meeting was organized and hosted by the University of Colorado at Boulder. A primary forward vision of the meeting was the importance of understanding skin microbial communities to improve the health and stealth of US Army warfighters.

  20. Statistical Ring Opening Metathesis Copolymerization of Norbornene and Cyclopentene by Grubbs' 1st-Generation Catalyst.

    PubMed

    Nikovia, Christiana; Maroudas, Andreas-Philippos; Goulis, Panagiotis; Tzimis, Dionysios; Paraskevopoulou, Patrina; Pitsikalis, Marinos

    2015-01-01

    Statistical copolymers of norbornene (NBE) with cyclopentene (CP) were prepared by ring-opening metathesis polymerization, employing the 1st-generation Grubbs' catalyst, in the presence or absence of triphenylphosphine, PPh₃. The reactivity ratios were estimated using the Finemann-Ross, inverted Finemann-Ross, and Kelen-Tüdos graphical methods, along with the computer program COPOINT, which evaluates the parameters of binary copolymerizations from comonomer/copolymer composition data by integrating a given copolymerization equation in its differential form. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions and the mean sequence length, which were derived using the monomer reactivity ratios. The kinetics of thermal decomposition of the copolymers along with the respective homopolymers was studied by thermogravimetric analysis within the framework of the Ozawa-Flynn-Wall and Kissinger methodologies. Finally, the effect of triphenylphosphine on the kinetics of copolymerization, the reactivity ratios, and the kinetics of thermal decomposition were examined. PMID:26343620

  1. PREFACE: 1st European Conference on Gas Micro Flows (GasMems 2012)

    NASA Astrophysics Data System (ADS)

    Frijns, Arjan; Valougeorgis, Dimitris; Colin, Stéphane; Baldas, Lucien

    2012-05-01

    The aim of the 1st European Conference on Gas Micro Flows is to advance research in Europe and worldwide in the field of gas micro flows as well as to improve global fundamental knowledge and to enable technological applications. Gas flows in microsystems are of great importance and touch almost every industrial field (e.g. fluidic microactuators for active control of aerodynamic flows, vacuum generators for extracting biological samples, mass flow and temperature micro-sensors, pressure gauges, micro heat-exchangers for the cooling of electronic components or for chemical applications, and micro gas analyzers or separators). The main characteristic of gas microflows is their rarefaction, which for device design often requires modelling and simulation both by continuous and molecular approaches. In such flows various non-equilibrium transport phenomena appear, while the role played by the interaction between the gas and the solid device surfaces becomes essential. The proposed models of boundary conditions often need an empirical adjustment strongly dependent on the micro manufacturing technique. The 1st European Conference on Gas Micro Flows is organized under the umbrella of the recently established GASMEMS network (www.gasmems.eu/) consisting of 13 participants and six associate members. The main objectives of the network are to structure research and train researchers in the fields of micro gas dynamics, measurement techniques for gaseous flows in micro experimental setups, microstructure design and micro manufacturing with applications in lab and industry. The conference takes place on June 6-8 2012, at the Skiathos Palace Hotel, on the beautiful island of Skiathos, Greece. The conference has received funding from the European Community's Seventh Framework Programme FP7/2007-2013 under grant agreement ITN GASMEMS no. 215504. It owes its success to many people. We would like to acknowledge the support of all members of the Scientific Committee and of all

  2. PREFACE: 1st International Conference on Rheology and Modeling of Materials

    NASA Astrophysics Data System (ADS)

    Gömze, László A.

    2015-04-01

    Understanding the rheological properties of materials and their rheological behaviors during their manufacturing processes and in their applications in many cases can help to increase the efficiency and competitiveness not only of the finished goods and products but the organizations and societies also. The more scientific supported and prepared organizations develop more competitive products with better thermal, mechanical, physical, chemical and biological properties and the leading companies apply more competitive knowledge, materials, equipment and technology processes. The idea to organize in Hungary the 1st International Conference on Rheology and Modeling of Materials we have received from prospective scientists, physicists, chemists, mathematicians and engineers from Asia, Europe, North and South America including India, Korea, Russia, Turkey, Estonia, France, Italy, United Kingdom, Chile, Mexico and USA. The goals of ic-rmm1 the 1st International Conference on Rheology and Modeling of Materials are the following: • Promote new methods and results of scientific research in the fields of modeling and measurements of rheological properties and behavior of materials under processing and applications. • Change information between the theoretical and applied sciences as well as technical and technological implantations. • Promote the communication between the scientists of different disciplines, nations, countries and continents. The international conference ic-rmm1 provides a platform among the leading international scientists, researchers, PhD students and engineers for discussing recent achievements in measurement, modeling and application of rheology in materials technology and materials science of liquids, melts, solids, crystals and amorphous structures. Among the major fields of interest are the influences of material structures, mechanical stresses temperature and deformation speeds on rheological and physical properties, phase transformation of

  3. Characterization of the Twelve Channel 100/140 Micron Optical Fiber, Ribbon Cable and MTP Array Connector Assembly for Space Flight Environments

    NASA Technical Reports Server (NTRS)

    Ott, Melanie N.; Macmurphy, Shawn; Friedberg, Patricia; Day, John H. (Technical Monitor)

    2002-01-01

    Presented here is the second set of testing conducted by the Technology Validation Laboratory for Photonics at NASA Goddard Space Flight Center on the 12 optical fiber ribbon cable with MTP array connector for space flight environments. In the first set of testing the commercial 62.5/125 cable assembly was characterized using space flight parameters. The testing showed that the cable assembly would survive a typical space flight mission with the exception of a vacuum environment. Two enhancements were conducted to the existing technology to better suit the vacuum environment as well as the existing optoelectronics and increase the reliability of the assembly during vibration. The MTP assembly characterized here has a 100/140 optical commercial fiber and non outgassing connector and cable components. The characterization for this enhanced fiber optic cable assembly involved vibration, thermal and radiation testing. The data and results of this characterization study are presented which include optical in-situ testing.

  4. 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop: April 5-7, 2011

    SciTech Connect

    Not Available

    2011-10-01

    The U.S. marine energy industry is actively pursuing development of offshore wind and marine hydrokinetic (MHK) energy systems. Experience in the wind energy sector demonstrates that new technology development requires thorough measurement and characterization of the environmental conditions prevalent at installation sites and of technology operating in the field. Presently, there are no turn-key instrumentation system solutions that meet the measurement needs of the marine energy industry. The 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop brought together technical experts from government laboratories, academia, and industry representatives from marine energy, wind, offshore oil and gas, and instrumentation developers to present and discuss the instrumentation needs of the marine energy industry. The goals of the meeting were to: (1) Share the latest relevant knowledge among technical experts; (2) Review relevant state-of-the-art field measurement technologies and methods; (3) Review lessons learned from recent field deployments; (4) Identify synergies across different industries; (5) Identify gaps between existing and needed instrumentation capabilities; (6) Understand who are the leading experts; (7) Provide a forum where stakeholders from the marine energy industry could provide substantive input in the development of new marine energy field deployable instrumentation packages.

  5. PROPAGATION AND EVOLUTION OF THE JUNE 1st 2008 CME IN THE INTERPLANETARY MEDIUM

    NASA Astrophysics Data System (ADS)

    Nieves-Chinchilla, T.; Lamb, D. A.; Davila, J. M.; Vinas, A. F.; Moestl, C.; Hidalgo, M. A.; Farrugia, C. J.; Malandraki, O.; Dresing, N.; Gómez-Herrero, R.

    2009-12-01

    In this work we present a study of the coronal mass ejection (CME) of June 1st of 2008 in the interplanetary medium. This event has been extensively studied by others because of its favorable geometry and the possible consequences of its peculiar initiation for space weather forecasting. We show an analysis of the evolution of the CME in the interplanetary medium in order to shed some light on the propagation mechanism of the ICME. We have determined the typical shock associated characteristics of the ICME in order to understand the propagation properties. Using two different non force-free models of the magnetic cloud allows us to incorporate expansion of the cloud. We use in-situ measurements from STEREO B/IMPACT to characterize the ICME. In addition, we use images from STEREO A/SECCHI-HI to analyze the propagation and visual evolution of the associated flux rope in the interplanetary medium. We compare and contrast these observations with the results of the analytical models.

  6. Wind-US Results for the AIAA 1st Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Yoder, Dennis; Dippold, Vance, III; Georgiadis, Nicholas

    2012-01-01

    This presentation contains Wind-US results presented at the 1st Propulsion Aerodynamics Workshop. The The workshop was organized by the American Institute of Aeronautics and Astronautics, Air Breathing Propulsion Propulsion Systems Integration Technical Committee with the purpose of assessing the accuracy of computational computational fluid dynamics for air breathing propulsion applications. Attendees included representatives from representatives from government, industry, academia, and commercial software companies. Participants were were encouraged to explore and discuss all aspects of the simulation process including the effects of mesh type and mesh type and refinement, solver numerical schemes, and turbulence modeling. The first set of challenge cases involved computing the thrust and discharge coefficients for a series of convergent convergent nozzles for a range of nozzle pressure ratios between 1.4 and 7.0. These configurations included a included a reference axisymmetric nozzle as well as 15deg , 25deg , and 40deg conical nozzles. Participants were also asked also asked to examine the plume shock structure for two cases where the 25deg conical nozzle was bifurcated by a bifurcated by a solid plate. The final test case was a serpentine inlet diffuser with an outlet to inlet area ratio of 1.52 ratio of 1.52 and an offset of 1.34 times the inlet diameter. Boundary layer profiles, wall static pressure, and total and total pressure at downstream rake locations were examined.

  7. 1st paleomagnetic investigation of Nubia Sandstone at Kalabsha, south Western Desert of Egypt

    NASA Astrophysics Data System (ADS)

    Mostafa, R.; Khashaba, A.; El-Hemaly, I. A.; Takla, E. M.; Abdel Aal, E.; Odah, H.

    2016-06-01

    Two profiles have been sampled from the Nubia Sandstone at Aswan, south Western Desert: the 1st profile has been taken from Abu Aggag Formation and the 2nd one was from Sabaya Formation (23.25 °N, 32.75 °E). 136 oriented cores (from 9 sites) have been sampled. Abu Aggag Formation is of Late Cretaceous (Turonian) and Sabaya Formation is of early Cretaceous (Albian-Cenomanian). The studied rocks are subjected to rock magnetic measurements as well as demagnetization treatment. It has been found that hematite is the main magnetic mineral in both formations. Four profile sections from Abu Aggag Formation, yielded a magnetic component with D = 352.7°, I = 36.6° with α95 = 5.2° and the corresponding pole lies at Lat. = 82.8 °N and Long. = 283.1 °E. Five profile sections from Sabaya Formation, yielded a magnetic component with D = 348.6°, I = 33.3° with α95 = 5.8° and the corresponding pole lies at Lat. = 78.3 °N and Long. = 280.4 °E. The obtained paleopole for the two formations lies at Lat. = 80.5 °N and Long. = 281.7 °E. The obtaind magnetic components are considered primary and the corresponding paleopole reflects the age of Nubia Sandstone when compared with the previously obtained Cretaceous poles for Egypt.

  8. [Struggle against typhus in the Caucasian front during the 1st World War].

    PubMed

    Karatepe, Mustafa

    2002-01-01

    As an infectious disease, typhus has triggered many epidemics during the course of wars and caused thousands of death all through the ages. The French physician Charles Nicolle (1886-1936) defined its agent as a louse transferring the disease from man to man in 1909 and was awarded the Nobel Prize in 1928. Many cases were reported during the 1st World War both in the European and the Ottoman armies; and one of the most severe epidemics broke in the Caucasian front; a great number of civilians and soldiers died at winter in 1914 and 1915. Lice had to be destroyed in order to prevent the epidemic, but etuves in the Caucasian front was too few to achieve it. Clothes were cleansed in ovens by means of a method proposed by Dr. Abdülkadir Noyan (1886-1977). On March 28, 1915 the first typhus vaccination, obtained from the infected blood of the patients, was applied by Dr. Tevfik Salim (Saklam) (1882-1963). In 1916 Dr. Ahmet Fikri Tüzer discovered a disinfection apparatus called "buğu sandiği" (vapour box) which was widely used in the Caucasian front after 1917. This apparatus was highly useful in controlling the typhus epidemics. 164 health officers lost their lifes in the Caucasian front between 1914-1918, in addition, 7310 military casualties were recorded from 1915 to the end of the war. PMID:17152154

  9. Identifying 1st instar larvae for three forensically important blowfly species using "fingerprint" cuticular hydrocarbon analysis.

    PubMed

    Moore, Hannah E; Adam, Craig D; Drijfhout, Falko P

    2014-07-01

    Calliphoridae are known to be the most forensically important insects when it comes to establishing the minimum post mortem interval (PMImin) in criminal investigations. The first step in calculating the PMImin is to identify the larvae present to species level. Accurate identification which is conventionally carried out by morphological analysis is crucial because different insects have different life stage timings. Rapid identification in the immature larvae stages would drastically cut time in criminal investigations as it would eliminate the need to rear larvae to adult flies to determine the species. Cuticular hydrocarbon analysis on 1st instar larvae has been applied to three forensically important blowflies; Lucilia sericata, Calliphora vicina and Calliphora vomitoria, using gas chromatography-mass spectrometry (GC-MS) and principal component analysis (PCA). The results show that each species holds a distinct "fingerprint" hydrocarbon profile, allowing for accurate identification to be established in 1-day old larvae, when it can be challenging to apply morphological criteria. Consequently, this GC-MS based technique could accelerate and strengthen the identification process, not only for forensically important species, but also for other entomological samples which are hard to identify using morphological features. PMID:24815992

  10. [POPIN Advisory Committee, 1st session. Geneva, March 22-25, 1982: report].

    PubMed

    1982-09-01

    A report of the POPIN, (International Population Information Network), Advisory Committee on its 1st session. The chairman presented a progress report on the activities of the Network in general and the POPIN coordinating unit in particular. More active participation by the developing countries was stressed to share information. The working group reported the efforts made by various groups for the translation of the population multilingual thesaurus into other languages. It also reviewed the draft manuscript on inventory and evaluation of training materials to identify gaps and make suggestions for improvement. The advisory committee suggested the development of a series of shorter guides which would deal with specific subjects. The development of a common classification scheme was considered of utmost importance since it would facilitate the processing, retrieval and exchange of information. A proposed work plan for 1983 and 1984 was discussed. This included publication of the POPIN Bulletin and newsletter, preparation of documentations for the sessions of the Advisory Committee, publication of the specific guides and a directory of POPIN members. Recommendations of the committee included measures for expansion of membership, publication of Popline multilingual thesaurus and guides for specific subjects. The committee considered and adopted the recommendations. Annexes include, 1) list of participants, documents and agenda, 2) recommendations of the POPIN working group on the management of the population multilingual thesaurus, and 3) recommendations on the inventory and evaluation of teaching materials for population information services. PMID:12279381

  11. The relation between 1st grade grey matter volume and 2nd grade math competence.

    PubMed

    Price, Gavin R; Wilkey, Eric D; Yeo, Darren J; Cutting, Laurie E

    2016-01-01

    Mathematical and numerical competence is a critical foundation for individual success in modern society yet the neurobiological sources of individual differences in math competence are poorly understood. Neuroimaging research over the last decade suggests that neural mechanisms in the parietal lobe, particularly the intraparietal sulcus (IPS) are structurally aberrant in individuals with mathematical learning disabilities. However, whether those same brain regions underlie individual differences in math performance across the full range of math abilities is unknown. Furthermore, previous studies have been exclusively cross-sectional, making it unclear whether variations in the structure of the IPS are caused by or consequences of the development of math skills. The present study investigates the relation between grey matter volume across the whole brain and math competence longitudinally in a representative sample of 50 elementary school children. Results show that grey matter volume in the left IPS at the end of 1st grade relates to math competence a year later at the end of 2nd grade. Grey matter volume in this region did not change over that year, and was still correlated with math competence at the end of 2nd grade. These findings support the hypothesis that the IPS and its associated functions represent a critical foundation for the acquisition of mathematical competence. PMID:26334946

  12. Jordanian Kindergarten and 1st-Grade Teachers' Beliefs about Child-Based Dimensions of School Readiness

    ERIC Educational Resources Information Center

    Fayez, Merfat; Ahmad, Jamal Fathi; Oliemat, Enass

    2016-01-01

    The purpose of this study was to explore the beliefs of Jordanian kindergarten and 1st-grade teachers regarding six child-based dimensions of school readiness: academic knowledge, basic thinking skills, socioemotional maturity, physical well-being and motor development, self-discipline, and communication skills. Questionnaires were used to collect…

  13. Laying a Foundation for Lifelong Learning: Case Studies of E-Assessment in Large 1st-Year Classes

    ERIC Educational Resources Information Center

    Nicol, David

    2007-01-01

    Concerns about noncompletion and the quality of the 1st-year student experience have been linked to recent changes in higher education such as modularisation, increased class sizes, greater diversity in the student intake and reduced resources. Improving formative assessment and feedback processes is seen as one way of addressing academic failure,…

  14. 78 FR 7781 - Filing Dates for the South Carolina Special Elections in the 1st Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-04

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the South Carolina Special Elections in the 1st Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special elections. SUMMARY: South Carolina...

  15. Addressing the Effects of Reciprocal Teaching on the Receptive and Expressive Vocabulary of 1st-Grade Students

    ERIC Educational Resources Information Center

    Mandel, Eliana; Osana, Helena P.; Venkatesh, Vivek

    2013-01-01

    This study evaluated the effects of Adapted Reciprocal Teaching (ART) on the receptive and expressive flight-word vocabulary of 1st-grade students. During ART, classroom interactions produced narrative contexts within which students assumed responsibility for applying new flight words in personally meaningful ways. Students in the control group…

  16. Predictive value of tender joints compared to synovitis for structural damage in rheumatoid arthritis

    PubMed Central

    Cheung, Peter P; Mari, Karine; Devauchelle-Pensec, Valérie; Jousse-Joulin, Sandrine; D'Agostino, Maria Antonietta; Chalès, Gérard; Gaudin, Philippe; Mariette, Xavier; Saraux, Alain; Dougados, Maxime

    2016-01-01

    Objective To evaluate the predictive value of tender joints compared to synovitis for structural damage in rheumatoid arthritis (RA). Methods A post hoc analysis was performed on a prospective 2-year study of 59 patients with active RA starting on antitumour necrosis factor (TNF). Tenderness and synovitis was assessed clinically at baseline, followed by blinded ultrasound assessment (B-mode and power Doppler ultrasound (PDUS)) on the hands and feet (2 wrists, 10 metacarpophalangeal, 10 proximal interphalangeal and 10 metatarsophalangeal (MTP) joints). Radiographs of these joints were performed at baseline and at 2 years. The risk of radiographic progression with respect to the presence of baseline tenderness or synovitis, as well as its persistence (after 4 months of anti-TNF), was estimated by OR (95% CI). Results Baseline tender joints were the least predictive for radiographic progression (OR=1.53 (95% CI 1.02 to 2.29) p<0.04), when compared to synovitis (clinical OR=2.08 (95% CI 1.39 to 3.11) p<0.001 or PDUS OR=1.80 (95% CI 1.20 to 2.71) p=0.005, respectively). Tender joints with the presence of synovitis were predictive of radiographic progression (OR=1.89 (95% CI 1.25 to 2.85) p=0.002), especially seen in the MTP joints. Non-tender joints with no synovitis were negatively predictive (OR=0.57 (95% CI 0.39 to 0.82) p=0.003). Persistence of tender joints was negatively predictive (OR=0.38 (95% CI 0.18 to 0.78) p=0.009) while persistence of synovitis was predictive (OR=2.41 (95% CI 1.24 to 4.67) p=0.01) of radiographic progression. Conclusions Synovitis is better than tenderness to predict for subsequent structural progression. However, coexistence of tenderness and synovitis at the level of an individual joint is predictive of structural damage, particularly in the MTP joints. Trial registration number NCT00444691. PMID:27042336

  17. PREFACE: 1st Conference on Light and Particle Beams in Materials Science 2013 (LPBMS2013)

    NASA Astrophysics Data System (ADS)

    Kumai, Reiji; Murakami, Youichi

    2014-04-01

    From 29-31 August 2013, the 1st International Conference on Light and Particle Beams in Materials Science, LPBMS 2013, took place in the Tsukuba International Congress Center in the city of Tsukuba, Japan. The conference was a continuation of the international series Synchrotron Radiation in Materials Science (SRMS), which started in 1994. The last one, SRMS-7, was held in Oxford UK 11-14 July 2010, where the International Advisory Committee (IAC) recommended the conference be enlarged to incorporate Materials Research from Neutron, Muon, and Slow Positron Sources, as well as the science emerging from Synchrotron Light Sources. The conference brought together contributions from academics and industrial researchers with a diverse background and experience from the physics, chemistry and engineering communities. The topics covered in the LPBMS2013 include strongly correlated electron systems, magnetism and magnetic materials, soft matter, interface and surface defects, catalysts, biomaterials, and ceramics. In the 3-day scientific program, the conference consisted of 9 plenary talks, 33 invited talks, 20 oral presentations, and 126 poster presentations. We are pleased to publish the proceedings of the LPBMS2013 in this volume of Journal of Physics: Conference Series. This volume contains 58 papers representing the work that was presented and discussed at the conference. We hope that this volume will promote further development of this interdisciplinary materials research emerging from synchrotron light, neutron, muon, and slow positron sciences. Finally, we would like to thank the International Advisory Committee (Chair: Professor G N Greaves), sponsors, all the participants and contributors for making possible this international meeting of researchers. Reiji Kumai & Youichi Murakami Conference photograph Details of the program and organizing committees are available in the pdf

  18. Computational Simulations of Convergent Nozzles for the AIAA 1st Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Dippold, Vance F., III

    2014-01-01

    Computational Fluid Dynamics (CFD) simulations were completed for a series of convergent nozzles in participation of the American Institute of Aeronautics and Astronautics (AIAA) 1st Propulsion Aerodynamics Workshop. The simulations were performed using the Wind-US flow solver. Discharge and thrust coefficients were computed for four axisymmetric nozzles with nozzle pressure ratios (NPR) ranging from 1.4 to 7.0. The computed discharge coefficients showed excellent agreement with available experimental data; the computed thrust coefficients captured trends observed in the experimental data, but over-predicted the thrust coefficient by 0.25 to 1.0 percent. Sonic lines were computed for cases with NPR >= 2.0 and agreed well with experimental data for NPR >= 2.5. Simulations were also performed for a 25 deg. conic nozzle bifurcated by a flat plate at NPR = 4.0. The jet plume shock structure was compared with and without the splitter plate to the experimental data. The Wind-US simulations predicted the shock structure well, though lack of grid resolution in the plume reduced the sharpness of the shock waves. Unsteady Reynolds-Averaged Navier-Stokes (URANS) simulations and Detached Eddy Simulations (DES) were performed at NPR = 1.6 for the 25 deg conic nozzle with splitter plate. The simulations predicted vortex shedding from the trailing edge of the splitter plate. However, the vortices of URANS and DES solutions appeared to dissipate earlier than observed experimentally. It is believed that a lack of grid resolution in the region of the vortex shedding may have caused the vortices to break down too soon

  19. Patterns of Irregular Burials in Western Europe (1st-5th Century A.D.)

    PubMed Central

    Milella, Marco; Mariotti, Valentina; Belcastro, Maria Giovanna; Knüsel, Christopher J.

    2015-01-01

    Background Irregular burials (IB—burials showing features that contrast with the majority of others in their geographic and chronological context) have been the focus of archaeological study because of their relative rarity and enigmatic appearance. Interpretations of IB often refer to supposed fear of the dead or to social processes taking place in time-specific contexts. However, a comprehensive and quantitative analysis of IB for various geographical contexts is still lacking, a fact that hampers any discussion of these burials on a larger scale. Methods Here, we collected a bibliographic dataset of 375 IB from both Britain and Continental Europe, altogether spanning a time period from the 1st to the 5th century AD. Each burial has been coded according to ten dichotomous variables, further analyzed by means of chi-squared tests on absolute frequencies, non-metric multidimensional scaling, and cluster analysis. Results Even acknowledging the limits of this study, and in particular the bias represented by the available literature, our results point to interesting patterns. Geographically, IB show a contrast between Britain and Continental Europe, possibly related to historical processes specific to these regions. Different types of IB (especially prone depositions and depositions with the cephalic extremity displaced) present a series of characteristics and associations between features that permit a more detailed conceptualization of these occurrences from a socio-cultural perspective that aids to elucidate their funerary meaning. Conclusions and Significance Altogether, the present work stresses the variability of IB, and the need to contextualize them in a proper archaeological and historical context. It contributes to the discussion of IB by providing a specific geographic and chronological frame of reference that supports a series of hypotheses about the cultural processes possibly underlying their occurrence. PMID:26115408

  20. Hypermobile joints

    MedlinePlus

    ... too far. In children with hypermobility syndrome, those ligaments are loose or weak. This may lead to: Arthritis, which may develop over time Dislocated joints, which is a separation of two bones where they meet at a joint Sprains and strains Children with hypermobile joints also often have flat ...

  1. Joint Disorders

    MedlinePlus

    A joint is where two or more bones come together, like the knee, hip, elbow, or shoulder. Joints can be damaged by many types of injuries or diseases, including Arthritis - inflammation of a joint. It causes pain, stiffness, and swelling. Over time, ...

  2. Adaptive and Effortful Control and Academic Self-Efficacy Beliefs on Achievement: A Longitudinal Study of 1st through 3rd Graders

    ERIC Educational Resources Information Center

    Liew, Jeffrey; McTigue, Erin M.; Barrois, Lisa; Hughes, Jan N.

    2008-01-01

    The linkages between self-regulatory processes and achievement were examined across 3 years in 733 children beginning at 1st grade (M = 6.57 years, S.D. = 0.39 at 1st grade) who were identified as lower achieving in literacy. Accounting for consistencies in measures (from 1 year prior) and for influences of child's age, gender, IQ, ethnicity and…

  3. Effects of the April 1st, 2014 GLONASS Outage on GNSS Receivers

    NASA Astrophysics Data System (ADS)

    Blume, F.; Berglund, H. T.; Romero, I.; D'Anastasio, E.

    2014-12-01

    The use of multi-constellation GNSS receivers has been assumed as a way to increase system integrity both by increased coverage during normal operations and failover redundancy in the event of a constellation failure. At approximately 21:00 UTC on April 1st the entire GLONASS constellation was disrupted as illegal ephemeris uploaded to each satellite took effect simultaneously. The outage continued for more than 10 hours. While ephemeris were incorrect, pseudoranges were correctly broadcast on both L1 and L2 and carrier phases were not affected; in the best case, GNSS receivers could be expected to continue to track all signals including GLONASS and at the worst to continue to track GPS and other constellations. It became clear to operators of the GeoNet network in New Zealand that the majority of their 79 GLONASS-enabled receivers experienced total tracking failures. Further detailed analysis of data from these and 315 additional GLONASS-enabled stations worldwide showed that receiver tracking behavior was affected for most receiver brands and models, both for GLONASS and GPS. Findings regarding the impacts of the GLONASS outage on receiver behavior will be highlighted. We use data recorded by GLONASS enabled global sites for the days during, preceding and following the outage to evaluate the impact of the outage on tracking and positioning performance. We observe that for some receiver types the onboard receiver autonomous integrity monitoring (RAIM) failed to ignore the incorrect messages, resulting in degraded GLONASS and GPS tracking and in some cases complete tracking failures and significant data loss. In addition, many of the receivers with clock steering enabled showed outliers in their receiver clock bias estimates that also coincided with the outage. Our results show in detail how different brands, configurations, and distributions of receivers were affected to varying extents, but no common factors are apparent. This event shows that many manufacturers

  4. PREFACE: 1st International Conference on Mechanical Engineering Research 2011 (ICMER2011)

    NASA Astrophysics Data System (ADS)

    Abu Bakar, Rosli

    2012-09-01

    The year 2010 represented a significant milestone in the history of the Mechanical Engineering community with the organization of the first and second national level conferences (National Conference in Mechanical Engineering for Research, 1st and 2nd NCMER) at Universiti Malaysia Pahang on 26-27 May and 3-4 December 2010. The conferences attracted a large number of delegates from different premier academic and research institutions in the country to participate and share their research experiences at the conference. The International Conference on Mechanical Engineering Research (ICMER 2011) followed on from the first and second conferences due to good support from researchers. The ICMER 2011 is a good platform for researchers and postgraduate students to present their latest finding in research. The conference covers a wide range of topics including the internal combustion engine, machining processes, heat and mass transfer, fuel, biomechanical analysis, aerodynamic analysis, thermal comfort, computational techniques, design and simulation, automotive transmission, optimization techniques, hybrid electric vehicles, engine vibration, heat exchangers, finite element analysis, computational fluid dynamics, green energy, vehicle dynamics renewable energy, combustion, design, product development, advanced experimentation techniques, to name but a few. The international conference has helped to bridge the gap between researchers working at different institutions and in different countries to share their knowledge and has helped to motivate young scientists with their research. This has also given some clear direction for further research from the deliberations of the conference. Several people have contributed in different ways to the success of the conference. We thank the keynote speakers and all authors of the contributed papers, for the cooperation rendered to us in the publication of the CD conference proceedings. In particular, we would like to place on record our

  5. PREFACE: 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies

    NASA Astrophysics Data System (ADS)

    Shuja Syed, Ahmed

    2013-12-01

    The 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies (ICSICCST-2013), took place in Karachi, Pakistan, from 24-26 June 2013. It was organized by Indus University, Karachi, in collaboration with HEJ Research Institute of Chemistry, University of Karachi, Karachi. More than 80 abstracts were submitted to the conference and were double blind-reviewed by an international scientific committee. The topics of the Conference were: Video, Image & Voice Sensing Sensing for Industry, Environment, and Health Automation and Controls Laser Sensors and Systems Displays for Innovative Applications Emerging Technologies Unmanned, Robotic, and Layered Systems Sensing for Defense, Homeland Security, and Law Enforcement The title of the conference, 'Sensing for Industry, Control, Communication & Security Technologies' is very apt in capturing the main issues facing the industry of Pakistan and the world. We believe the sensing industry, particularly in Pakistan, is currently at a critical juncture of its development. The future of the industry will depend on how the industry players choose to respond to the challenge of global competition and opportunities arising from strong growth in the Asian region for which we are pleased to note that the conference covered a comprehensive spectrum of issues with an international perspective. This will certainly assist industry players to make informed decisions in shaping the future of the industry. The conference gathered qualified researchers from developed countries like USA, UK, Sweden, Saudi Arabia, China, South Korea and Malaysia etc whose expertise resulting from the research can be drawn upon to build an exploitable area of new technology that has potential Defense, Homeland Security, and Military applicability. More than 250 researchers/students attended the event and made the event great success as the turnout was 100%. An exceptional line-up of speakers spoke at the occasion. We want

  6. PREFACE: 1st-2nd Young Researchers Meetings in Rome - Proceedings

    NASA Astrophysics Data System (ADS)

    YRMR Organizing Committee; Cannuccia, E.; Mazzaferro, L.; Migliaccio, M.; Pietrobon, D.; Stellato, F.; Veneziani, M.

    2011-03-01

    Students in science, particularly in physics, face a fascinating and challenging future. Scientists have proposed very interesting theories, which describe the microscopic and macroscopic world fairly well, trying to match the quantum regime with cosmological scales. Between the extremes of this scenario, biological phenomena in all their complexity take place, challenging the laws we observe in the atomic and sub-atomic world. More and more accurate and complex experiments have been devised and these are now going to test the paradigms of physics. Notable experiments include: the Large Hadronic Collider (LHC), which is going to shed light on the physics of the Standard Model of Particles and its extensions; the Planck-Herschel satellites, which target a very precise measurement of the properties of our Universe; and the Free Electron Lasers facilities, which produce high-brilliance, ultrafast X-ray pulses, allowing the investigation of the fundamental processes of solid state physics, chemistry, and biology. These projects are the result of huge collaborations spread across the world, involving scientists belonging to different and complementary research fields: physicists, chemists, biologists and others, keen to make the best of these extraordinary laboratories. Even though each branch of science is experiencing a process of growing specialization, it is very important to keep an eye on the global picture, remaining aware of the deep interconnections between inherent fields. This is even more crucial for students who are beginning their research careers. These considerations motivated PhD students and young post-docs connected to the Roman scientific research area to organize a conference, to establish the background and the network for interactions and collaborations. This resulted in the 1st and 2nd Young Researchers Meetings in Rome (http://ryrm.roma2.infn.it), one day conferences aimed primarily at graduate students and post-docs, working in physics in Italy

  7. Teachers' Spatial Anxiety Relates to 1st-and 2nd-Graders' Spatial Learning

    ERIC Educational Resources Information Center

    Gunderson, Elizabeth A.; Ramirez, Gerardo; Beilock, Sian L.; Levine, Susan C.

    2013-01-01

    Teachers' anxiety about an academic domain, such as math, can impact students' learning in that domain. We asked whether this relation held in the domain of spatial skill, given the importance of spatial skill for success in math and science and its malleability at a young age. We measured 1st-and 2nd-grade teachers' spatial anxiety…

  8. Gene-Environment Interaction Effects on the Development of Immune Responses in the 1st Year of Life

    PubMed Central

    Hoffjan, Sabine; Nicolae, Dan; Ostrovnaya, Irina; Roberg, Kathy; Evans, Michael; Mirel, Daniel B.; Steiner, Lori; Walker, Karen; Shult, Peter; Gangnon, Ronald E.; Gern, James E.; Martinez, Fernando D.; Lemanske, Robert F.; Ober, Carole

    2005-01-01

    Asthma is a common disease that results from both genetic and environmental risk factors. Children attending day care in the 1st year of life have lower risks for developing asthma, although the mechanism for this “day care” effect is largely unknown. We investigated the interactions between day care exposure in the 1st 6 mo of life and genotypes for 72 polymorphisms at 45 candidate loci and their effects on cytokine response profiles and on the development of atopic phenotypes in the 1st year of life in the Childhood Onset of Asthma (COAST) cohort of children. Six interactions (at four polymorphisms in three loci) with “day care” that had an effect on early-life immune phenotypes were significant at P<.001. The estimated false-discovery rate was 33%, indicating that an estimated four P values correspond to true associations. Moreover, the “day care” effect at some loci was accounted for by the increased number of viral infections among COAST children attending day care, whereas interactions at other loci were independent of the number of viral infections, indicating the presence of additional risk factors associated with day care environment. This study identified significant gene-environment interactions influencing the early patterning of the immune system and the subsequent development of asthma and highlights the importance of considering environmental risk factors in genetic analyses. PMID:15726497

  9. Overexpression of the transporters AtZIP1 and AtMTP1 in cassava changes zinc accumulation and partitioning

    PubMed Central

    Gaitán-Solís, Eliana; Taylor, Nigel J.; Siritunga, Dimuth; Stevens, William; Schachtman, Daniel P.

    2015-01-01

    Zinc deficiency in humans is a serious problem worldwide with an estimated one third of populations at risk for insufficient zinc in diet, which leads to impairment of cognitive abilities and immune system function. The goal of this research was to increase the bioavailable zinc in the edible portion of cassava roots to improve the overall zinc nutrition of populations that rely on cassava as a dietary staple. To increase zinc concentrations, two Arabidopsis thaliana genes coding for ZIP1 and MTP1 were overexpressed with a tuber-specific or constitutive promoter. Eighteen transgenic events from four constructs, out of a total of 73 events generated, showed significantly higher zinc concentrations in the edible portion of the storage root compared to the non-transgenic controls. The zinc content in the transgenic lines ranged from 4 to 73 mg/kg dry weight (DW) as compared to the non-transgenic control which contained 8 mg/kg. Striking changes in whole plant phenotype such as smaller plant size and chlorotic leaves were observed in transgenic lines that over accumulated zinc. In a confined field trial five transgenic events grown for 12 months showed a range of zinc concentrations from 18 to 217 mg/kg DW. Although the overexpression of zinc transporters was successful in increasing the zinc concentrations in 25% of the transgenic lines generated, it also resulted in a decrease in plant and tuber size and overall yield due to what appears to be zinc deficiency in the aerial parts of the plant. PMID:26217349

  10. [1st National Meeting of Multidisciplinary Work in Oncogeriatrics: expert consensus document].

    PubMed

    Antonio, Maite; Saldaña, Juana; Formiga, Francesc; Lozano, Alicia; González-Barboteo, Jesús; Fernández, Paz; Arias, Fernando; Arribas, Lorena; Barbero, Elisabeth; Bescós, María del Mar; Boya, Maria Jesús; Bueso, Pilar; Casas, Ana; Dotor, Emma; Fort, Eduard; García-Alfonso, Pilar; Herruzo, Ismael; Llonch, Mireia; Morlans, Germà; Murillo, Maria Teresa; Ossola, Gustavo; Peiró, Inma; Saiz, Fabiola; Sanz, Javier; Serra, José Antonio; Trelis, Jordi; Yuste, Antonio

    2012-01-01

    On 2nd of June 2011 the Institut Català d' Oncologia l'Hospitalet--Hospital Duran i Reynals hosted the first Meeting of Multidisciplinary Work in Oncogeriatrics. The reason for the meeting, which follows on from an initiative of the Medical Societies of Radiotherapy, Oncology, Geriatrics and Gerontology and Palliative Care and Medical Oncology, was to initiate a joint line of work among the different specialties that generally take part in the handling of the elderly patient suffering from oncologic pathologies. This document summarises the different subjects covered during the Meeting. PMID:23044361

  11. The theoretical simulation on electrostatic distribution of 1st proximity region in proximity focusing low-light-level image intensifier

    NASA Astrophysics Data System (ADS)

    Zhang, Liandong; Bai, Xiaofeng; Song, De; Fu, Shencheng; Li, Ye; Duanmu, Qingduo

    2015-03-01

    Low-light-level night vision technology is magnifying low light level signal large enough to be seen by naked eye, which uses the photons - photoelectron as information carrier. Until the micro-channel plate was invented, it has been possibility for the realization of high performance and miniaturization of low-light-level night vision device. The device is double-proximity focusing low-light-level image intensifier which places a micro-channel plate close to photocathode and phosphor screen. The advantages of proximity focusing low-light-level night vision are small size, light weight, small power consumption, no distortion, fast response speed, wide dynamic range and so on. It is placed parallel to each other for Micro-channel plate (both sides of it with metal electrode), the photocathode and the phosphor screen are placed parallel to each other. The voltage is applied between photocathode and the input of micro-channel plate when image intensifier works. The emission electron excited by photo on the photocathode move towards to micro-channel plate under the electric field in 1st proximity focusing region, and then it is multiplied through the micro-channel. The movement locus of emission electrons can be calculated and simulated when the distributions of electrostatic field equipotential lines are determined in the 1st proximity focusing region. Furthermore the resolution of image tube can be determined. However the distributions of electrostatic fields and equipotential lines are complex due to a lot of micro-channel existing in the micro channel plate. This paper simulates electrostatic distribution of 1st proximity region in double-proximity focusing low-light-level image intensifier with the finite element simulation analysis software Ansoft maxwell 3D. The electrostatic field distributions of 1st proximity region are compared when the micro-channel plates' pore size, spacing and inclination angle ranged. We believe that the electron beam movement

  12. PREFACE: PAGES 1st Young Scientists Meeting (YSM) - 'Retrospective views on our planet's future'

    NASA Astrophysics Data System (ADS)

    Margrethe Basse, Ellen

    2010-03-01

    more recent pollution. The concept and format of the 1st PAGES YSM worked very well, and

  13. The 1st October 2009 Messina debris flows: first analysis for a susceptibility model

    NASA Astrophysics Data System (ADS)

    Agnesi, Valerio; Cappadonia, Chiara; Conoscenti, Christian; Costanzo, Dario; Pino, Paolo; Puglisi, Claudio; Rotigliano, Edoardo

    2010-05-01

    In the evening of the 1st of October 2009, a sector of the Messina district (Sicily, Italy) was struck by a number of debris flows, triggered by extraordinary intense rainfall that, from 2 pm to 10 pm, discharged an amount of more than 160 mm and that followed the ones of September 23-24 (more than 200 mm in 10 hours). A number of villages (Altolia, Briga, Giampilieri, Guidomandri, Itala, Molino, Pezzolo, Scaletta), suffered for severe damages, including the destruction of houses and small buildings and more of 30 deaths. The area is located South from the city of Messina and mainly includes five short fluvial basins, that from the Peloritanian chain drain south-eastward for some kilometres to the Ionian sea. The area is characterized by the outcropping of metamorphic rocks and, due to the closeness of the chain (ranging up to 1200 meters a.s.l.) to the sea, the steepness of the slopes is typically very high. The debris flows involved the shallow layer made up of colluvial/eluvial and landslide deposits, having a thickness of some decimetres; both pure debris flow and debris slide movements have been inferred at the initiation zones, in light of the morphologic features of the source area (scarps). Also, according to the specific patterns recognized for the flow track zone, four typologies have been distinguished: ribbon-shaped, triangular, arch-shaped and multi-lobed debris flow. The landslides moved fast, as single or multiple/successive confluent style, so that already at the medium sector of the slopes, where the villages are, huge volumes of the debris flowed. Due to the shallowness of the failure zone, the high water content and velocity, the tracks of the debris flows have been highly controlled by hydrography, reaching, where no obstacles were present, the valley floor, with kilometric run-out distances. To each of the 379 recognized debris flows, which produced a total landslide area of about 7 km2, a landslide identification point (LIP) has been assigned

  14. The importance of considering the evidence in the MTP 2014 Amendment debate in India - unsubstantiated arguments should not impede improved access to safe abortion.

    PubMed

    Paul, Mandira; Danielsson, Kristina Gemzell; Essén, Birgitta; Allvin, Marie Klingberg

    2015-01-01

    With the objective to improve access to safe abortion services in India, the Ministry of Health and Welfare, with approval of the Law Ministry, published draft amendments of the MTP Act on October 29, 2014. Instead of the expected support, the amendments created a heated debate within professional medical associations of India. In this commentary, we review the evidence in response to the current discourse with regard to the amendments. It would be unfortunate if unsubstantiated one-sided arguments would impede the intention of improving access to safe abortion care in India. PMID:25828071

  15. The importance of considering the evidence in the MTP 2014 Amendment debate in India – unsubstantiated arguments should not impede improved access to safe abortion

    PubMed Central

    Paul, Mandira; Danielsson, Kristina Gemzell; Essén, Birgitta; Allvin, Marie Klingberg

    2015-01-01

    With the objective to improve access to safe abortion services in India, the Ministry of Health and Welfare, with approval of the Law Ministry, published draft amendments of the MTP Act on October 29, 2014. Instead of the expected support, the amendments created a heated debate within professional medical associations of India. In this commentary, we review the evidence in response to the current discourse with regard to the amendments. It would be unfortunate if unsubstantiated one-sided arguments would impede the intention of improving access to safe abortion care in India. PMID:25828071

  16. Ceramic joints

    DOEpatents

    Miller, Bradley J.; Patten, Jr., Donald O.

    1991-01-01

    Butt joints between materials having different coefficients of thermal expansion are prepared having a reduced probability of failure of stress facture. This is accomplished by narrowing/tapering the material having the lower coefficient of thermal expansion in a direction away from the joint interface and not joining the narrow-tapered surface to the material having the higher coefficient of thermal expansion.

  17. Goniometrie evaluation of standing extension and maximum flexion joint angles of llamas and alpacas.

    PubMed

    Walters, Amy L; Semevolos, Stacy A; Baker, Rose E

    2016-09-01

    OBJECTIVE To determine and compare mean standing extension and maximum flexion angles of various joints in healthy adult alpacas and llamas, and determine the reliability of goniometric data within and between 2 observers for each joint of interest. SAMPLE 6 healthy adult llamas and 6 healthy adult alpacas. PROCEDURES The shoulder joint, elbow joint, carpal, and metacarpophalangeal (MCP) joints of the forelimbs and the hip joint, stifle joint, tarsal, and metatarsophalangeal (MTP) joints of the hind limbs were investigated. Each articulation was measured with a universal goniometer by 2 observers, who each obtained 2 measurements when each joint was maintained in standing extension and in maximal passive flexion. Two sample (unpaired) t tests were performed for comparisons of mean standing extension and maximum passive flexion angles between alpacas and llamas. Intraclass correlation coefficients were calculated for each articulation to assess interobserver and intra-observer reliability of measurements. RESULTS Llamas had larger mean standing extension angles than alpacas for the tarsal and elbow joint, but there were no significant differences between species for all other joints. For all joints, flexion measurements did not differ significantly between the 2 species. For most joints, the reliability of goniometric data between observers was good to excellent (intraclass correlation coefficients, 0.6 to 0.95) CONCLUSIONS AND CLINICAL RELEVANCE Except for the elbow joint and tarsus in extension, the angle of limb articulations during flexion and extension can be considered similar for alpacas and llamas. These measurements have relevance for veterinary surgeons when assessing joint mobility and conformation and determining appropriate angles for arthrodesis. PMID:27580112

  18. PREFACE: PAGES 1st Young Scientists Meeting (YSM) - 'Retrospective views on our planet's future'

    NASA Astrophysics Data System (ADS)

    Cléroux, Caroline; Fehrenbacher, Jennifer; Phipps, Steven; Rupper, Summer; Williams, Branwen; Kiefer, Thorsten

    2010-03-01

    more recent pollution. The concept and format of the 1st PAGES YSM worked very well, and created a high degree of enthusiasm and stimulation among the participants (as is demonstrated by this special issue). The 2nd YSM is therefore firmly planned to take place in 2013, back-to-back with the 4th PAGES OSM. Crucial and gratefully acknowledged contributions to the success of the YSM were made by the numerous co-sponsors (see logos below), who provided the financial basis for the YSM and supported the attendance of many early-career researchers from various parts of the world. Furthermore, we cordially thank all reviewers for shaping this proceeding issue with their insightful and helpful reviews. Conference photograph

  19. When should orthostatic blood pressure changes be evaluated in elderly: 1st, 3rd or 5th minute?

    PubMed

    Soysal, Pinar; Aydin, Ali Ekrem; Koc Okudur, Saadet; Isik, Ahmet Turan

    2016-01-01

    Detection of orthostatic hypotension (OH) is very important in geriatric practice, since OH is associated with mortality, ischemic stroke, falls, cognitive failure and depression. It was aimed to determine the most appropriate time for measuring blood pressure in transition from supine to upright position in order to diagnose OH in elderly. Comprehensive geriatric assessment (CGA) including Head up Tilt Table (HUT) test was performed in 407 geriatric patients. Orthostatic changes were assessed separately for the 1st, 3rd and 5th minutes (HUT1, HUT3 and HUT5, respectively) taking the data in supine position as the basis. The mean age, recurrent falls, presence of dementia and Parkinson's disease, number of drugs, alpha-blocker and anti-dementia drug use, and fasting blood glucose levels were significantly higher in the patients with versus without OH; whereas, albumin and 25-hydroxy vitamin D levels were significantly lower (p<0.05). However, different from HUT3 and HUT5, Charlson Comorbidity Index and the prevalence of diabetes mellitus were higher, the use of antidiabetics, antipsychotics, benzodiazepine, opioid and levodopa were more common (p<0.05). Statistical significance of the number of drugs and fasting blood glucose level was prominent in HUT1 as compared to HUT3 (p<0.01, p<0.05). Comparison of the patients that had OH only in HUT1, HUT3or HUT5 revealed no difference in terms of CGA parameters. These results suggests that orthostatic blood pressure changes determined at the 1st minute might be more important for geriatric practice. Moreover, 1st minute measurement might be more convenient in the elderly as it requires shorter time in practice. PMID:27077324

  20. Educational impact of a clinical anatomy workshop on 1st-year orthopedic and rheumatology fellows in Mexico City.

    PubMed

    Saavedra, M A; Villaseñor-Ovies, P; Harfush, L A; Navarro-Zarza, J E; Canoso, J J; Cruz-Domínguez, P; Vargas, A; Hernández-Díaz, C; Chiapas-Gasca, K; Camacho-Galindo, J; Alvarez-Nemegyei, J; Kalish, R A

    2016-05-01

    We aim to study the educational impact of a clinical anatomy workshop in 1st-year orthopedic and rheumatology fellows. First-year rheumatology fellows (N = 17) and a convenience sample of 1st-year orthopedic fellows (N = 14) from Mexico City in the 9th month of training participated in the study. The pre- and the post- workshop tests included the same 20 questions that had to be answered by identification or demonstration of relevant anatomical items. The questions, arranged by anatomical regions, were asked in five dynamic stations. Overall, the 31 participants showed an increase of correct answers, from a median of 6 (range 1 to 12) in the pre-workshop test, to a median of 14 (range 7 to 19) in the post-workshop test. In the pre-workshop test, the correct median answers were 7 (range 2 to 12) in the orthopedic fellows and 5 (range 1 to 10) in the rheumatology fellows (p = 0.297). Corresponding scores in the post-workshop were 15 (range 10 to 19) and 12 (range 7 to 18) (p = 0.026) showing a significant difference favoring the orthopedic group. Our clinical anatomy workshop was efficacious, in the short term, as a teaching instrument for 1st-year orthopedic and rheumatology fellows. The post-workshop scores, although significantly improved in both groups, particularly in the orthopedic fellows, were still suboptimal. Further refinements of our workshop might yield better results. PMID:26400643

  1. Temporomandibular Joint, Closed

    MedlinePlus

    ... Oral Health > The Temporomandibular Joint, Closed The Temporomandibular Joint, Closed Main Content Title: The Temporomandibular Joint, Closed Description: The temporomandibular joint connects the lower ...

  2. Membrane Transfer Phenomena (MTP)

    NASA Technical Reports Server (NTRS)

    Mason, Larry

    1996-01-01

    Progress has been made in several areas of the definition, design, and development of the Membrane Transport Apparatus (MTA) instrument and associated sensors and systems. Progress is also reported in the development of software modules for instrument control, experimental image and data acquisition, and data analysis.

  3. Membrane Transport Phenomena (MTP)

    NASA Technical Reports Server (NTRS)

    Mason, Larry W.

    1996-01-01

    The development of the seal between the membrane and the Fluid Optical Cells (FOC) has been a high priority activity. This seal occurs at an interface in the instrument where three key functions must be realized: (1) physical membrane support, (2) fluid sealing, and (3) unobscured optical transmission.

  4. Joint Problems

    MedlinePlus

    ... ankles and toes. Other types of arthritis include gout or pseudogout. Sometimes, there is a mechanical problem ... for more information on osteoarthritis, rheumatoid arthritis and gout. How Common are Joint Problems? Osteoarthritis, which affects ...

  5. Joint pain

    MedlinePlus

    ... or conditions. It may be linked to arthritis , bursitis , and muscle pain . No matter what causes it, ... Autoimmune diseases such as rheumatoid arthritis and lupus Bursitis Chondromalacia patellae Crystals in the joint: gout (especially ...

  6. Compliant joint

    NASA Technical Reports Server (NTRS)

    Eklund, Wayne D. (Inventor); Kerley, James J. (Inventor)

    1990-01-01

    A compliant joint is provided for prosthetic and robotic devices which permits rotation in three different planes. The joint provides for the controlled use of cable under motion. Perpendicular outer mounting frames are joined by swaged cables that interlock at a center block. Ball bearings allow for the free rotation of the second mounting frame relative to the first mounting frame within a predetermined angular rotation that is controlled by two stop devices. The cables allow for compliance at the stops and the cables allow for compliance in six degrees of freedom enabling the duplication or simulation of the rotational movement and flexibility of a natural hip or knee joint, as well as the simulation of a joint designed for a specific robotic component for predetermined design parameters.

  7. Identification and Characterization of Zebrafish SULT1 ST9, SULT3 ST4, and SULT3 ST5

    PubMed Central

    Mohammed, Yasir I.; Kurogi, Katsuhisa; Shaban, Amani Al; Xu, Zheng; Liu, Ming-Yih; Williams, Frederick E.; Sakakibara, Yoichi; Suiko, Masahito; Bhuiyan, Shakhawat; Liu, Ming-Cheh

    2012-01-01

    By searching the GenBank database, we identified sequences encoding three new zebrafish cytosolic sulfotransferases (SULTs). These three new zebrafish SULTs, designated SULT1 ST9, SULT3 ST4, and SULT3 ST5, were cloned, expressed, purified, and characterized. SULT1 ST9 appeared to be mostly involved in the metabolism and detoxification of xenobiotics such as β-naphthol, β-naphthylamine, caffeic acid and gallic acid. SULT3 ST4 showed strong activity toward endogenous compound such as dehydroepiandrosterone (DHEA), pregnenolone, and 17β-estradiol. SULT3 ST5 showed weaker, but significant, activities toward endogenous compounds such as DHEA and corticosterone, as well as xenobiotics including mestranol, β-naphthylamine, β-naphthol, and butylated hydroxyl anisole (BHA). pH-dependency and kinetic constants of these three enzymes were determined with DHEA, β-naphthol, and 17β-estradiol as substrates. Reverse transcription-polymerase chain reaction (RT-PCR) was performed to examine the expression of these three new zebrafish SULTs at different developmental stages during embryogenesis, through larval development, and on to maturity. PMID:22360938

  8. Attitudes towards General Practice: a comparative cross-sectional survey of 1st and 5th year medical students

    PubMed Central

    Kruschinski, Carsten; Wiese, Birgitt; Hummers-Pradier, Eva

    2012-01-01

    Objective: Positive attitudes towards General Practice can be understood as a prerequisite for becoming a General Practitioner (GP) and for collaboration with GPs later on. This study aimed to assess attitudes of medical students at the beginning and the end of medical school. Methods: A total of 160 1st year students at Hannover Medical School were surveyed. Their attitudes were compared to those of 287 5th year students. Descriptive, bi- and multivariate analyses were performed to investigate influences of year of study and gender. Results: Year of study and gender both were associated with the attitudes towards General Practice. The interest in General Practice and patient-orientation (communication, care of older patients with chronic diseases) was higher in 1st year students compared to more advanced students. Female students valued such requirements more than male students, the differences in attitudes between the years of study being more pronounced in male students. Conclusion: Despite some limitations caused by the cross-sectional design, the attitudes towards General Practice competencies changed to their disadvantage during medical school. This suggests a formative influence of the strategies used in medical education. Educational strategies, however, could be used to bring about a change of attitudes in the other direction. PMID:23255966

  9. BMI differences in 1st and 2nd generation immigrants of Asian and European origin to Australia.

    PubMed

    Hauck, Katharina; Hollingsworth, Bruce; Morgan, Lawrie

    2011-01-01

    We estimate assimilation of immigrants' body mass index (BMI) to the host population of Australia over one generation, conducting separate analyses for immigrants from 7 regions of Europe and Asia. We use quantile regressions to allow for differing impact of generational status across 19 quantiles of BMI from under-weight to morbidly obese individuals. We find that 1st generation South European immigrants have higher, and South and East Asian immigrants have lower BMI than Australians, but have assimilated to the BMI of their hosts in the 2nd generation. There are no or only small BMI differences between Australians and 1st and 2nd generation immigrants from East Europe, North-West Europe, Middle East and Pacific regions. We conclude that both upward and downward assimilation in some immigrant groups is most likely caused by factors which can change over one generation (such as acculturation), and not factors which would take longer to change (such as genetics). Our results suggest that public health policies targeting the lifestyles of well educated Asian immigrants may be effective in preventing BMI increase in this subgroup. PMID:20869292

  10. A Preliminary Analysis of Cometary Dust in the 1st Year of the NEOWISE Restarted Mission

    NASA Astrophysics Data System (ADS)

    Kramer, Emily A.; Bauer, James M.; Fernández, Yanga R.; Mainzer, Amy K.; Grav, Tommy; Masiero, Joseph R.; Nugent, Carolyn R.; Sonnett, Sarah; Cutri, Roc; Stevenson, Rachel

    2015-11-01

    As some of the most pristine objects in the Solar System, comets present an opportunity to understand the mechanics and chemistry of the planetary formation era. By studying a large number of comets in different dynamical classes, we can better understand the ensemble properties of the different classes, and begin to characterize the evolution that may have occurred since their formation.In late 2013, the WISE spacecraft was brought out of hibernation, and renamed NEOWISE with a renewed goal to detect and characterize small bodies using its 3.4 and 4.6-micron bands. Survey operations began in December 2013 [1], and the first year of data was publicly released in March 2015 [2]. During the course of the first year of the restarted mission, over 60 comets were serendipitously detected by NEOWISE at heliocentric distances between ~1-7.5 AU, including 3 newly discovered comets. The comets detected were split roughly evenly between short-period and long-period comets, and many displayed extended dust structures. Several of the comets were detected multiple times over the course of the year, and some were also seen during the prime WISE mission. This long baseline allows for an intriguing analysis of long-term cometary behavior.NEOWISE has sampled the behavior of these comet dynamical sub-types over the thermal infrared and near-infrared reflected-light regimes, where effects from different particle size ranges of dust may dominate the morphologies and observed fluxes. We present a preliminary analysis of the cometary dust seen in these data, including dynamical models to constrain the sizes and ages of the dust particles. We discuss how these results compare to those obtained for the comets seen in the 12 and 22-micron WISE prime mission data.Acknowledgments: This publication makes use of data products from (1) WISE, which is a joint project of UCLA and JPL/Caltech, funded by NASA; and (2) NEOWISE, which is a project of JPL/Caltech, funded by the Planetary Science

  11. A comparison of 3-T magnetic resonance imaging and computed tomography arthrography to identify structural cartilage defects of the fetlock joint in the horse.

    PubMed

    Hontoir, Fanny; Nisolle, Jean-François; Meurisse, Hubert; Simon, Vincent; Tallier, Max; Vanderstricht, Renaud; Antoine, Nadine; Piret, Joëlle; Clegg, Peter; Vandeweerd, Jean-Michel

    2014-01-01

    Articular cartilage defects are prevalent in metacarpo/metatarsophalangeal (MCP/MTP) joints of horses. The aim of this study was to determine and compare the sensitivity and specificity of 3-Tesla magnetic resonance imaging (3-T MRI) and computed tomography arthrography (CTA) to identify structural cartilage defects in the equine MCP/MTP joint. Forty distal cadaver limbs were imaged by CTA (after injection of contrast medium) and by 3-T MRI using specific sequences, namely, dual-echo in the steady-state (DESS), and sampling perfection with application-optimised contrast using different flip-angle evolutions (SPACE). Gross anatomy was used as the gold standard to evaluate sensitivity and specificity of both imaging techniques. CTA sensitivity and specificity were 0.82 and 0.96, respectively, and were significantly higher than those of MRI (0.41 and 0.93, respectively) in detecting overall cartilage defects (no defect vs. defect). The intra and inter-rater agreements were 0.96 and 0.92, respectively, and 0.82 and 0.88, respectively, for CT and MRI. The positive predictive value for MRI was low (0.57). CTA was considered a valuable tool for assessing cartilage defects in the MCP/MTP joint due to its short acquisition time, its specificity and sensitivity, and it was also more accurate than MRI. However, MRI permits assessment of soft tissues and subchondral bone and is a useful technique for joint evaluation, although clinicians should be aware of the limitations of this diagnostic technique, including reduced accuracy. PMID:24321368

  12. Impact of volcanic eruptions on the climate of the 1st millennium AD in a comprehensive climate simulation

    NASA Astrophysics Data System (ADS)

    Wagner, Sebastian; Zorita, Eduardo

    2015-04-01

    The climate of the 1st millennium AD shows some remarkable differences compared to the last millennium concerning variation in external forcings. Together with an orbitally induced increased solar insolation during the northern hemisphere summer season and a general lack of strong solar minima, the frequency and intensity of large tropical and extratropical eruptions is decreased. Here we present results of a new climate simulation carried out with the comprehensive Earth System Model MPI-ESM-P forced with variations in orbital, solar, volcanic and greenhouse gas variations and land use changes for the last 2,100 years. The atmospheric model has a horizontal resolution of T63 (approx. 125x125 km) and therefore also allows investigations of regional-to-continental scale climatic phenomena. The volcanic forcing was reconstructed based on a publication by Sigl et al. (2013) using the sulfate records of the NEEM and WAIS ice cores. To obtain information on the aerosol optical depth (AOD) these sulfate records were scaled to an established reconstruction from Crowley and Unterman (2010), which is also a standard forcing in the framework of CMIP5/PMIP3. A comparison between the newly created data set with the Crowley and Unterman dataset reveals that the new reconstruction shows in general weaker intensities, especially of the large tropical outbreaks and fewer northern hemispheric small-to-medium scale eruptions. However, the general pattern in the overlapping period is similar. A hypothesis that can be tested with the simulation is whether the reduced volcanic intensity of the 1st millennium AD contributed to the elevated temperature levels over Europe, evident within a new proxy-based reconstruction. On the other hand, the few but large volcanic eruptions, e.g. the 528 AD event, also induced negative decadal-scale temperature anomalies. Another interesting result of the simulation relates to the 79 AD eruption of the Vesuvius, which caused the collapse of the city of

  13. Plasma properties from the multi-wavelength analysis of the November 1st 2003 CME/shock event

    PubMed Central

    Benna, Carlo; Mancuso, Salvatore; Giordano, Silvio; Gioannini, Lorenzo

    2012-01-01

    The analysis of the spectral properties and dynamic evolution of a CME/shock event observed on November 1st 2003 in white-light by the LASCO coronagraph and in the ultraviolet by the UVCS instrument operating aboard SOHO, has been performed to compute the properties of some important plasma parameters in the middle corona below about 2R⊙. Simultaneous observations obtained with the MLSO/Mk4 white-light coronagraph, providing both the early evolution of the CME expansion in the corona and the pre-shock electron density profile along the CME front, were also used to study this event. By combining the above information with the analysis of the metric type II radio emission detected by ground-based radio spectrographs, we finally derive estimates of the values of the local Alfvén speed and magnetic field strength in the solar corona. PMID:25685432

  14. Levels of innate immune factors in preterm and term mothers' breast milk during the 1st month postpartum.

    PubMed

    Trend, Stephanie; Strunk, Tobias; Lloyd, Megan L; Kok, Chooi Heen; Metcalfe, Jessica; Geddes, Donna T; Lai, Ching Tat; Richmond, Peter; Doherty, Dorota A; Simmer, Karen; Currie, Andrew

    2016-04-14

    There is a paucity of data on the effect of preterm birth on the immunological composition of breast milk throughout the different stages of lactation. We aimed to characterise the effects of preterm birth on the levels of immune factors in milk during the 1st month postpartum, to determine whether preterm milk is deficient in antimicrobial factors. Colostrum (days 2-5 postpartum), transitional milk (days 8-12) and mature milk (days 26-30) were collected from mothers of extremely preterm (<28 weeks of gestation, n 15), very preterm (28-<32 weeks of gestation, n 15), moderately preterm (32-<37 weeks of gestation, n 15) and term infants (37-41 weeks of gestation, n 15). Total protein, lactoferrin, secretory IgA, soluble CD14 receptor (sCD14), transforming growth factor-β2 (TGF-β2), α defensin 5 (HD5), β defensins 1 (HBD1) and 2, IL-6, IL-10, IL-13, interferon-γ, TNF-α and lysozyme (LZ) were quantified in milk. We examined the effects of lactation stage, gestational age, volume of milk expressed, mode of delivery, parity and maternal infection on milk immune factor concentrations using repeated-measures regression analysis. The concentrations of all factors except LZ and HD5 decreased over the 1st month postpartum. Extremely preterm mothers had significantly higher concentrations of HBD1 and TGF-β2 in colostrum than term mothers did. After controlling for other variables in regression analyses, preterm birth was associated with higher concentrations of HBD1, LZ and sCD14 in milk samples. In conclusion, preterm breast milk contains significantly higher concentrations of some immune proteins than term breast milk. PMID:26891901

  15. Boundary layer stability and transition to turbulence; Proceedings of the Symposium, ASME and JSME Joint Fluids Engineering Conference, 1st, Portland, OR, June 23-27, 1991

    NASA Technical Reports Server (NTRS)

    Reda, D. C. (Editor); Reed, H. L. (Editor); Kobayashi, R. (Editor)

    1991-01-01

    The papers presented at the conference provide an overview of current research related to the mechanisms of the laminar-turbulent transition. The principal topics discussed include receptivity, bypass mechanisms, curvature, three-dimensionality, nonlinearities, breakdown, and control. Papers are included on linear and nonlinear receptivity to vortical free-stream disturbances; initiation of boundary-layer disturbances by nonlinear mode interactions; stability and transition to turbulence of thin liquid film flow along a rotating disk; and turbulent intermittency measurements for turbomachinery flows.

  16. JANNAF 25Th Airbreathing Propulsion Subcommittee, 37Th Combustion Subcommittee and 1St Modeling and Simulation Subcommittee Joint Meeting. Volume 1

    NASA Technical Reports Server (NTRS)

    Fry, Ronald S. (Editor); Becker, Dorothy L. (Editor)

    2000-01-01

    Contents include the following: 1. Hyper-X program: Propulsion development and verification. 2. GTX program: Airbreathing launch vehicles. 3. Hypersonic technology development: Technology program overviews. Ramjet/scramjet research. 4. Hypersonic test methods: Test medium effects. 5. Advanced propulsion: RBCC engine design and performance assessments. Advanced and combined cycle engine technology.

  17. Towards big data science in the decade ahead from ten years of InCoB and the 1st ISCB-Asia Joint Conference

    PubMed Central

    2011-01-01

    The 2011 International Conference on Bioinformatics (InCoB) conference, which is the annual scientific conference of the Asia-Pacific Bioinformatics Network (APBioNet), is hosted by Kuala Lumpur, Malaysia, is co-organized with the first ISCB-Asia conference of the International Society for Computational Biology (ISCB). InCoB and the sequencing of the human genome are both celebrating their tenth anniversaries and InCoB’s goalposts for the next decade, implementing standards in bioinformatics and globally distributed computational networks, will be discussed and adopted at this conference. Of the 49 manuscripts (selected from 104 submissions) accepted to BMC Genomics and BMC Bioinformatics conference supplements, 24 are featured in this issue, covering software tools, genome/proteome analysis, systems biology (networks, pathways, bioimaging) and drug discovery and design. PMID:22372736

  18. FY-2015 FES (Fusion and Energy Sciences) Joint Research Target: Final Report for the Period October 1st, 2014, through September 30th, 2015

    SciTech Connect

    Podesta, M.; Holcomb, C.; Wallace, G.; Gerhardt, S. P.; Scott, S. D.; Solomon, W.

    2015-09-30

    Annual JRT-15 Target: Conduct experiments and analysis to quantify the impact of broadened current and pressure profiles on tokamak plasma confinement and stability. Broadened pressure profiles generally improve global stability but can also affect transport and confinement, while broadened current profiles can have both beneficial and adverse impacts on confinement and stability. This research will examine a variety of heating and current drive techniques in order to validate theoretical models of both the actuator performance and the transport and global stability response to varied heating and current drive deposition.

  19. Joint lubrication.

    PubMed

    McCutchen, C W

    1983-01-01

    The fine-pored, easily compressed articular cartilage provides animal joints with self-pressurized hydrostatic (weeping) lubrication. The solid skeletons of the cartilages press against each other, but so lightly that their rubbing is lubricated successfully by synovial fluid--a boundary lubricant too weak to lubricate ordinary bearings. PMID:6317095

  20. Social and moral norm differences among Portuguese 1st and 6th year medical students towards their intention to comply with hand hygiene.

    PubMed

    Roberto, Magda S; Mearns, Kathryn; Silva, Silvia A

    2012-01-01

    This study examines social and moral norms towards the intention to comply with hand hygiene among Portuguese medical students from 1st and 6th years (N = 175; 121 from the 1st year, 54 from the 6th year). The study extended the theory of planned behaviour theoretical principles and hypothesised that both subjective and moral norms will be the best predictors of 1st and 6th year medical students' intention to comply with hand hygiene; however, these predictors ability to explain intention variance will change according to medical students' school year. Results indicated that the subjective norm, whose referent focuses on professors, is a relevant predictor of 1st year medical students' intention, while the subjective norm that emphasises the relevance of colleagues predicts the intentions of medical students from the 6th year. In terms of the moral norm, 6th year students' intention is better predicted by a norm that interferes with compliance; whereas intentions from 1st year students are better predicted by a norm that favours compliance. Implications of the findings highlight the importance of role models and mentors as key factors in teaching hand hygiene in medical undergraduate curricula. PMID:22111788

  1. Flexion strength of the toes in the normal foot. An evaluation using magnetic resonance imaging.

    PubMed

    Green, S M; Briggs, P J

    2013-12-01

    Flexion of the toes may be active from muscle contraction or passive from the reversed windlass function of the plantar aponeurosis. The aim of this study was to estimate the flexion moments the muscles of the foot and long digital flexors may be capable of generating and compare these calculations with published data. Magnetic resonance images were used to measure the maximal cross-sectional area of the foot muscles and long digital flexors, along with the radius of curvature of the metatarsal heads. Using known physiological data the maximal flexion moments the muscles may be able to generate at the metatarsophalangeal (MTP) joints were calculated. The methodology overestimates muscle strength and flexion moments at the metatarsophalangeal joints. The calculated maximal flexion moment at the 1st MTP joint is 4.27-6.84 Nm, for the 2nd, 3rd and 4th MTP joints 3.06-4.91 Nm, and the 5th MTP joint 0.47-0.75 Nm. The flexion moments the muscles may generate at the MTP joints do not account for the flexion forces seen in normal walking. Given that maximal strength is not used in normal walking, we conclude that the reversed windlass mechanism of the plantar aponeurosis must be important in normal function of the toes. PMID:23954110

  2. Adaptive and Effortful Control and Academic Self-efficacy Beliefs on Achievement: A Longitudinal Study of 1st through 3rd Graders

    PubMed Central

    Liew, Jeffrey; McTigue, Erin; Barrois, Lisa; Hughes, Jan

    2009-01-01

    The linkages between self-regulatory processes and achievement were examined across three years in 733 children beginning at 1st grade (M = 6.57 years, SD = .39 at 1st grade) who were identified as lower achieving in literacy. Accounting for consistencies in measures (from one year prior) and for influences of child’s age, gender, IQ, ethnicity and economic adversity on achievement, results indicate that adaptive/effortful control at 1st grade contributed to both academic self-efficacy beliefs at 2nd grade, and reading (but not math) achievement at 3rd grade. Although academic self-efficacy did not partially mediate the linkage between adaptive/effortful control and achievement, academic self-efficacy beliefs were positively correlated with reading and math. Results support the notion that early efforts to promote children’s self-regulatory skills would enhance future academic self-beliefs and achievement, particularly in literacy. PMID:19169387

  3. Joint assembly

    NASA Technical Reports Server (NTRS)

    Wilson, Andrew (Inventor); Punnoose, Andrew (Inventor); Strausser, Katherine (Inventor); Parikh, Neil (Inventor)

    2010-01-01

    A joint assembly is provided which includes a drive assembly and a swivel mechanism. The drive assembly features a motor operatively associated with a plurality of drive shafts for driving auxiliary elements, and a plurality of swivel shafts for pivoting the drive assembly. The swivel mechanism engages the swivel shafts and has a fixable element that may be attached to a foundation. The swivel mechanism is adapted to cooperate with the swivel shafts to pivot the drive assembly with at least two degrees of freedom relative to the foundation. The joint assembly allows for all components to remain encased in a tight, compact, and sealed package, making it ideal for space, exploratory, and commercial applications.

  4. Case Study of Severe Lightning Activity Prior to and During the Outbreak of the June 1st Greenbelt Tornado

    NASA Astrophysics Data System (ADS)

    Barnum, B. H.; Badesha, S.; Shishineh, A.; Adams, N. H.

    2012-12-01

    Surges in lightning activity have been known to be associated with the outbreak of tornado activity. We present a case study of a tornado that touched down near Greenbelt Maryland during the evening of June 1st 2012. Preceding the tornado touchdown, two single point lightning detection systems, a Boltek LD-250 and Vaisala SA20, recorded very high lightning activity rates. An electric field mill (EFM) was also making measurements and recorded large, rapid amplitude oscillations in the vertical electric fields. These electric field oscillations quickly subsided after the initial tornado touchdown. The lightning activity also generated significant RF interference in the S-band dish antenna operated at the Applied Physics Laboratory. It was somewhat surprising that the lightning activity produced enough radiation at these frequencies to cause measured levels of interference which could potentially impair satellite communications. Our interpretation of the EFM data is that intensive vertical forcing and rotation in the thunderstorm during the tornado formation caused the observed rapid electric field oscillations. At the same time, the vertical mixing in the storm caused a surge in lightning activity rates recorded by the Boltek and Vaisala sensors. Following the tornado touchdown, there was a rapid decrease in the lightning rates from the sensors. The EFM oscillations also abruptly ceased and went to a more normal slow-varying pattern typically observed during other thunderstorms without associated tornado activity. It is suggested that a network of field mills could provide realtime warning of imminent tornado activity.

  5. A learning skills course for the 1st year medical students: an experience at a Saudi medical school

    PubMed Central

    Siddiqui, Imran A; Bin Abdulrahman, Khalid A; Alsultan, Mohammed A

    2015-01-01

    Background Every year nearly 1,500 students enter into medical program after passing high school and national aptitude exams. However, many students experience frustration, failure, and psychological morbidities like stress, depression, and anxiety because they are not aware of their learning styles or do not have effective learning skills and strategies. The College of Medicine of Al-Imam Muhammad ibn Saud Islamic University has adopted the outcome based, community oriented, Spiral Curriculum. Although the curriculum is innovative, on the other hand, it is very demanding. Objective The purpose of this paper is to share educational structure and evaluation results of the course on effective learning and study skills for the 1st year medical students. Methods To prepare our students in order to cope with this demanding but promising curriculum, we conducted an effective and comprehensive learning skills course for 16 weeks in the first semester of year 1 in the medical program. Performance of each student was assessed and the course evaluation was done by students at the end of the course. Results The attendance of the students throughout the course was over 90%. The average performance of students in the summative assessment was 78% and the course was generally liked by the students. Discussion Students overall had a positive attitude toward the learning skills course. Majority of the students showed interest in attending the sessions regularly and realized the significance of this course to improve their learning skills. PMID:25848332

  6. Synthesis of nanomagnetic fluids and their UV spectrophotometric response with aliphatic organic acids and 1st tier dendrimers

    NASA Astrophysics Data System (ADS)

    Pandya, Shivani R.; Singh, Man

    2016-04-01

    Synthesis of Magnetic nanoparticles were made using coprecipitation method on mixing Fe+3 and Fe+2 in 2:1 ratio with aqueous 8M NaOH which on heating at 90°C for 2 h has yielded 85% magnetic (Fe3O4) nanoparticles (MNPs), characterized by XRD, VSM, SEM, and HR-TEM. The formic acid (FA), oxalic acid (OA) and citric acid (CA), the series of aliphatic organic acids along with Trimesoyl 1, 3, 5 tridimethyl malonate (TTDMM), trimesoyl 1, 3, 5 tridiethyl malonate (TTDEM), trimesoyl 1, 3, 5 tridipropyl malonate (TTDPM), trimesoyl 1, 3, 5 tridibutyl malonate (TTDBM) and trimesoyl 1, 3, 5 tridihexyl malonate (TTDHM) 1st tier dendrimers were used separately for preparing nanomagnetic fluid. From 25 to 150 µM MNPs at an interval of 25 µM were dispersed in 150 µM of acids and dendrimers separately with DMSO. UV-VIS spectrophotometry showed a maximum MNPs dispersion with TTDMM against others and found to be most stable nanomagnetic fluid on account of capping type mechanism of acids.

  7. Stem Cell Gene Therapy for Fanconi Anemia: Report from the 1st International Fanconi Anemia Gene Therapy Working Group Meeting

    PubMed Central

    Tolar, Jakub; Adair, Jennifer E; Antoniou, Michael; Bartholomae, Cynthia C; Becker, Pamela S; Blazar, Bruce R; Bueren, Juan; Carroll, Thomas; Cavazzana-Calvo, Marina; Clapp, D Wade; Dalgleish, Robert; Galy, Anne; Gaspar, H Bobby; Hanenberg, Helmut; Von Kalle, Christof; Kiem, Hans-Peter; Lindeman, Dirk; Naldini, Luigi; Navarro, Susana; Renella, Raffaele; Rio, Paula; Sevilla, Julián; Schmidt, Manfred; Verhoeyen, Els; Wagner, John E; Williams, David A; Thrasher, Adrian J

    2011-01-01

    Survival rates after allogeneic hematopoietic cell transplantation (HCT) for Fanconi anemia (FA) have increased dramatically since 2000. However, the use of autologous stem cell gene therapy, whereby the patient's own blood stem cells are modified to express the wild-type gene product, could potentially avoid the early and late complications of allogeneic HCT. Over the last decades, gene therapy has experienced a high degree of optimism interrupted by periods of diminished expectation. Optimism stems from recent examples of successful gene correction in several congenital immunodeficiencies, whereas diminished expectations come from the realization that gene therapy will not be free of side effects. The goal of the 1st International Fanconi Anemia Gene Therapy Working Group Meeting was to determine the optimal strategy for moving stem cell gene therapy into clinical trials for individuals with FA. To this end, key investigators examined vector design, transduction method, criteria for large-scale clinical-grade vector manufacture, hematopoietic cell preparation, and eligibility criteria for FA patients most likely to benefit. The report summarizes the roadmap for the development of gene therapy for FA. PMID:21540837

  8. Child gender and weight status moderate the relation of maternal feeding practices to body esteem in 1st grade children.

    PubMed

    Shriver, Lenka H; Hubbs-Tait, Laura; Harrist, Amanda W; Topham, Glade; Page, Melanie

    2015-06-01

    Prevention of body dissatisfaction development is critical for minimizing adverse effects of poor body esteem on eating behaviors, self-esteem, and overall health. Research has examined body esteem and its correlates largely in pre-adolescents and adolescents; however, important questions remain about factors influencing body esteem of younger children. The main purpose of this study was to test moderation by children's gender and weight status of the relation of maternal controlling feeding practices to 1st graders' body esteem. The Body Esteem Scale (BES) and anthropometric measurements were completed during one-on-one child interviews at school. Mothers completed the Child Feeding Questionnaire (restriction, monitoring, concern, self-assessed maternal weight). A total of 410 mother/child dyads (202 girls) participated. Percent of children classified as overweight (BMI-for-age ≥85th) was: girls - 29%; boys - 27%. Gender moderated the relation between restriction and body esteem (β = -.140, p = .05), with maternal restriction predicting body esteem in girls but not boys. The hypothesized three-way interaction among gender, child weight status, and monitoring was confirmed. Monitoring was significantly inversely related to body esteem only for overweight/obese girls (b = -1.630). The moderating influence of gender or gender and weight status on the link between maternal feeding practices and body esteem suggests the importance of body esteem interventions for girls as early as first grade. PMID:25624022

  9. Frontline nilotinib in patients with chronic myeloid leukemia in chronic phase: results from the European ENEST1st study.

    PubMed

    Hochhaus, A; Rosti, G; Cross, N C P; Steegmann, J L; le Coutre, P; Ossenkoppele, G; Petrov, L; Masszi, T; Hellmann, A; Griskevicius, L; Wiktor-Jedrzejczak, W; Rea, D; Coriu, D; Brümmendorf, T H; Porkka, K; Saglio, G; Gastl, G; Müller, M C; Schuld, P; Di Matteo, P; Pellegrino, A; Dezzani, L; Mahon, F-X; Baccarani, M; Giles, F J

    2016-01-01

    The Evaluating Nilotinib Efficacy and Safety in Clinical Trials as First-Line Treatment (ENEST1st) study included 1089 patients with newly diagnosed chronic myeloid leukemia in chronic phase. The rate of deep molecular response (MR(4) (BCR-ABL1⩽0.01% on the International Scale or undetectable BCR-ABL1 with ⩾10,000 ABL1 transcripts)) at 18 months was evaluated as the primary end point, with molecular responses monitored by the European Treatment and Outcome Study network of standardized laboratories. This analysis was conducted after all patients had completed 24 months of study treatment (80.9% of patients) or discontinued early. In patients with typical BCR-ABL1 transcripts and ⩽3 months of prior imatinib therapy, 38.4% (404/1052) achieved MR(4) at 18 months. Six patients (0.6%) developed accelerated or blastic phase, and 13 (1.2%) died. The safety profile of nilotinib was consistent with that of previous studies, although the frequencies of some nilotinib-associated adverse events were lower (for example, rash, 21.4%). Ischemic cardiovascular events occurred in 6.0% of patients. Routine monitoring of lipid and glucose levels was not mandated in the protocol. These results support the use of frontline nilotinib, particularly when achievement of a deep molecular response (a prerequisite for attempting treatment-free remission in clinical trials) is a treatment goal. PMID:26437782

  10. Frontline nilotinib in patients with chronic myeloid leukemia in chronic phase: results from the European ENEST1st study

    PubMed Central

    Hochhaus, A; Rosti, G; Cross, N C P; Steegmann, J L; le Coutre, P; Ossenkoppele, G; Petrov, L; Masszi, T; Hellmann, A; Griskevicius, L; Wiktor-Jedrzejczak, W; Rea, D; Coriu, D; Brümmendorf, T H; Porkka, K; Saglio, G; Gastl, G; Müller, M C; Schuld, P; Di Matteo, P; Pellegrino, A; Dezzani, L; Mahon, F-X; Baccarani, M; Giles, F J

    2016-01-01

    The Evaluating Nilotinib Efficacy and Safety in Clinical Trials as First-Line Treatment (ENEST1st) study included 1089 patients with newly diagnosed chronic myeloid leukemia in chronic phase. The rate of deep molecular response (MR4 (BCR-ABL1⩽0.01% on the International Scale or undetectable BCR-ABL1 with ⩾10 000 ABL1 transcripts)) at 18 months was evaluated as the primary end point, with molecular responses monitored by the European Treatment and Outcome Study network of standardized laboratories. This analysis was conducted after all patients had completed 24 months of study treatment (80.9% of patients) or discontinued early. In patients with typical BCR-ABL1 transcripts and ⩽3 months of prior imatinib therapy, 38.4% (404/1052) achieved MR4 at 18 months. Six patients (0.6%) developed accelerated or blastic phase, and 13 (1.2%) died. The safety profile of nilotinib was consistent with that of previous studies, although the frequencies of some nilotinib-associated adverse events were lower (for example, rash, 21.4%). Ischemic cardiovascular events occurred in 6.0% of patients. Routine monitoring of lipid and glucose levels was not mandated in the protocol. These results support the use of frontline nilotinib, particularly when achievement of a deep molecular response (a prerequisite for attempting treatment-free remission in clinical trials) is a treatment goal. PMID:26437782

  11. 1st Quarter Transportation Report FY 2015: Radioactive Waste Shipments to and from the Nevada National Security Site (NNSS)

    SciTech Connect

    Gregory, Louis

    2015-02-20

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to and from the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the 1st quarter of Fiscal Year (FY) 2015 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report include minor volumes of non-radioactive classified waste/material that were approved for disposal (non-radioactive classified or nonradioactive classified hazardous). Volume reports showing cubic feet generated using the Low-Level Waste Information System may vary slightly due to rounding conventions for volumetric conversions from cubic meters to cubic feet.

  12. Embryonic development of chicken (Gallus Gallus Domesticus) from 1st to 19th day-ectodermal structures.

    PubMed

    Toledo Fonseca, Erika; De Oliveira Silva, Fernanda Menezes; Alcântara, Dayane; Carvalho Cardoso, Rafael; Luís Franciolli, André; Sarmento, Carlos Alberto Palmeira; Fratini, Paula; José Piantino Ferreira, Antônio; Miglino, Maria Angélica

    2013-12-01

    Birds occupy a prominent place in the Brazilian economy not only in the poultry industry but also as an animal model in many areas of scientific research. Thus the aim of this study was to provide a description of macro and microscopic aspects of the ectoderm-derived structures in chicken embryos / fetuses poultry (Gallus gallus domesticus) from 1st to 19th day of incubation. 40 fertilized eggs, from a strain of domestic chickens, with an incubation period of 2-19 days were subjected to macroscopic description, biometrics, light, and scanning microscopy. All changes observed during the development were described. The nervous system, skin and appendages and organs related to vision and hearing began to be identified, both macro and microscopically, from the second day of incubation. The vesicles from the primitive central nervous system-forebrain, midbrain, and hindbrain-were identified on the third day of incubation. On the sixth day of incubation, there was a clear vascularization of the skin. The optic vesicle was first observed fourth day of development and on the fifth day there was the beginning of the lens formation. Although embryonic development is influenced by animal line as well as external factors such as incubation temperature, this paper provides a chronological description for chicken (Gallus gallus domesticus) during its embryonic development. PMID:24019213

  13. Ultrasound-detected activity in rheumatoid arthritis on methotrexate therapy: Which joints and tendons should be assessed to predict unstable remission?

    PubMed

    Janta, Iustina; Valor, Lara; De la Torre, Inmaculada; Martínez-Estupiñán, Lina; Nieto, Juan Carlos; Ovalles-Bonilla, Juan Gabriel; Martínez-Barrio, Julia; Bello, Natalia; Hinojosa, Michelle; Montoro, María; González, Carlos Manuel; López-Longo, Javier; Monteagudo, Indalecio; Carreño, Luis; Naredo, Esperanza

    2016-03-01

    The aim of the study was to investigate the predictive value of different reduced joint ultrasound (US) assessments of synovitis and tenosynovitis in relation to unstable remission in a cohort of rheumatoid arthritis (RA) patients on methotrexate therapy. Forty-seven RA patients (38 women, 9 men), being treated with methotrexate (MTX), in clinical remission as judged by their consultant rheumatologist were evaluated for disease activity according to the Disease Activity Score (DAS) 28 at baseline and 6 months. Sustained remission and unstable remission were defined according to the baseline and 6-month DAS28 and changes in RA therapy during the follow-up. Each patient underwent at baseline a B-mode and power Doppler (PD) assessment of 44 joints and 20 tendons/tendon compartments by a rheumatologist blinded to the clinical and laboratory data. B-mode synovial hypertrophy (SH), synovial PD signal, B-mode tenosynovitis, and Doppler tenosynovitis were scored 0-3. The presence and index of synovial PD signal in 44 joints [odds ratio (OR) 8.21 (p = 0.016) and OR 2.20 (p = 0.049), respectively] and in 12 joints [OR 5.82 (p = 0.041) and OR 4.19 (p = 0.020), respectively], the presence of SH in wrist and MCP joints [OR 4.79 (p = 0.045)], and the presence of synovial PD signal in wrist-MCP-ankle-MTP joints [OR 4.62 (p = 0.046)] were predictors of unstable remission. The 12-joint or wrist-hand-ankle-MTP US assessments can predict unstable remission in RA patients in apparent clinical remission being treated with MTX. PMID:26712373

  14. The Impact of Gender-Fair versus Gender-Stereotyped Basal Readers on 1st-Grade Children's Gender Stereotypes: A Natural Experiment

    ERIC Educational Resources Information Center

    Karniol, Rachel; Gal-Disegni, Michal

    2009-01-01

    Israeli 1st-grade children in two different schools in the same neighborhood who were using either a gender-stereotyped or a gender-fair basal reader were asked to judge for a series of female-stereotyped, male-stereotyped, and gender-neutral activities whether they were characteristic of females, of males, or of both. Children using the…

  15. Moving beyond the Lone Scientist: Helping 1st-Grade Students Appreciate the Social Context of Scientific Work Using Stories about Scientists

    ERIC Educational Resources Information Center

    Sharkawy, Azza

    2009-01-01

    While several studies have documented young children's (K-2) stereotypic views of scientists and scientific work, few have examined students' views of the social nature of scientific work and the strategies effective in broadening these views. The purpose of this study is to examine how stories about scientists influence 1st-grade students' views…

  16. Diagnostic Online Assessment of Basic IT Skills in 1st-Year Undergraduates in the Medical Sciences Division, University of Oxford

    ERIC Educational Resources Information Center

    Sieber, Vivien

    2009-01-01

    Attitude, experience and competence (broadly covered by the European Computer Driving Licence syllabus) in information technology (IT) were assessed in 846 1st-year Medical Sciences Division undergraduates (2003-06) at the start of their first term. Online assessments delivered during induction workshops were presented as an opportunity for…

  17. Cognitive-based approach in teaching 1st year Physics for Life Sciences, including Atmospheric Physics and Climate Change components

    NASA Astrophysics Data System (ADS)

    Petelina, S. V.

    2009-12-01

    Most 1st year students who take the service course in Physics - Physics for Life Sciences - in Australia encounter numerous problems caused by such factors as no previous experience with this subject; general perception that Physics is hard and only very gifted people are able to understand it; lack of knowledge of elementary mathematics; difficulties encountered by lecturers in teaching university level Physics to a class of nearly 200 students with no prior experience, diverse and sometime disadvantageous backgrounds, different majoring areas, and different learning abilities. As a result, many students either drop, or fail the subject. In addition, many of those who pass develop a huge dislike towards Physics, consider the whole experience as time wasted, and spread this opinion among their peers and friends. The above issues were addressed by introducing numerous changes to the curriculum and modifying strategies and approaches in teaching Physics for Life Sciences. Instead of a conventional approach - teaching Physics from simple to complicated, topic after topic, the students were placed in the world of Physics in the same way as a newborn child is introduced to this world - everything is seen all the time and everywhere. That created a unique environment where a bigger picture and all details were always present and interrelated. Numerous concepts of classical and modern physics were discussed, compared, and interconnected all the time with “Light” being a key component. Our primary field of research is Atmospheric Physics, in particular studying the atmospheric composition and structure using various satellite and ground-based data. With this expertise and also inspired by an increasing importance of training a scientifically educated generation who understands the challenges of the modern society and responsibilities that come with wealth, a new section on environmental physics has been developed. It included atmospheric processes and the greenhouse

  18. Small airway dysfunction by impulse oscillometry in asthmatic patients with normal forced expiratory volume in the 1st second values.

    PubMed

    Pisi, Roberta; Tzani, Panagiota; Aiello, Marina; Martinelli, Enrico; Marangio, Emilio; Nicolini, Gabriele; Olivieri, Dario; Chetta, Alfredo

    2013-01-01

    Small airways are relevant to the pathophysiology of asthma. We investigated whether in asthmatic patients with normal forced expiratory volume in the 1st second (FEV(1)) values, impulse oscillometry system (IOS), as a measure of small airway function, contributed additional information to spirometry either at baseline or after bronchodilator, and whether it was related to the disease control. The fall in resistance from 5 to 20 Hz (R5-R20) and reactance at 5 Hz (X5) by IOS and spirometry measures of small airway function (forced expiratory flow at 25-75% [FEF(25-75)] and forced vital capacity/slow inspiratory vital capacity [FVC/SVC]) at baseline and after 400 micrograms of salbutamol were prospectively measured in 33 asthmatic patients (18 women; age range, 18-66 years). Disease control was assessed by the Asthma Control Test (ACT). R5-R20 but not X5 values were significantly related to FEF(25-75) and FVC/SVC values (p < 0.05 for both correlations). When the bronchodilator response was assessed, no correlation was found among IOS and spirometry changes. ACT scores were related to R5-R20, FEF(25-75), and FVC/SVC values (p < 0.01 for all correlations). In asthmatic patients with normal FEV(1) values, R5-R20 values were related to spirometry measures of small airway function. However, when the bronchodilator response was assessed, IOS and spirometry provided quite different results. Moreover, small airway dysfunction, as assessed by IOS and spirometry, was associated with poor disease control and history of asthma exacerbations. The results of this study confirm the value of IOS, as an investigative tool, and suggest that in asthmatic patients with normal FEV(1) values and poor disease control, small airway function should be investigated. PMID:23406931

  19. New approaches for improving the production of the 1st and 2nd generation ethanol by yeast.

    PubMed

    Kurylenko, Olena; Semkiv, Marta; Ruchala, Justyna; Hryniv, Orest; Kshanovska, Barbara; Abbas, Charles; Dmytruk, Kostyantyn; Sibirny, Andriy

    2016-01-01

    Increase in the production of 1st generation ethanol from glucose is possible by the reduction in the production of ethanol co-products, especially biomass. We have developed a method to reduce biomass accumulation of Saccharomyces cerevisiae by the manipulation of the intracellular ATP level due to overexpression of genes of alkaline phosphatase, apyrase or enzymes involved in futile cycles. The strains constructed accumulated up to 10% more ethanol on a cornmeal hydrolysate medium. Similar increase in ethanol accumulation was observed in the mutants resistant to the toxic inhibitors of glycolysis like 3-bromopyruvate and others. Substantial increase in fuel ethanol production will be obtained by the development of new strains of yeasts that ferment sugars of the abundant lignocellulosic feedstocks, especially xylose, a pentose sugar. We have found that xylose can be fermented under elevated temperatures by the thermotolerant yeast, Hansenula polymorpha. We combined protein engineering of the gene coding for xylose reductase (XYL1) along with overexpression of the other two genes responsible for xylose metabolism in yeast (XYL2, XYL3) and the deletion of the global transcriptional activator CAT8, with the selection of mutants defective in utilizing ethanol as a carbon source using the anticancer drug, 3-bromopyruvate. Resulted strains accumulated 20-25 times more ethanol from xylose at the elevated temperature of 45°C with up to 12.5 g L(-1) produced. Increase in ethanol yield and productivity from xylose was also achieved by overexpression of genes coding for the peroxisomal enzymes: transketolase (DAS1) and transaldolase (TAL2), and deletion of the ATG13 gene. PMID:26619255

  20. FOREWORD: 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications/1st International Conference on Fusion Energy Materials Science 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications/1st International Conference on Fusion Energy Materials Science

    NASA Astrophysics Data System (ADS)

    Jacob, Wolfgang; Linsmeier, Christian; Rubel, Marek

    2011-12-01

    The 13th International Workshop on Plasma-Facing Materials and Components (PFMC-13) jointly organized with the 1st International Conference on Fusion Energy Materials Science (FEMaS-1) was held in Rosenheim (Germany) on 9-13 May 2011. PFMC-13 is a successor of the International Workshop on Carbon Materials for Fusion Applications series. Between 1985 and 2003 ten 'Carbon Workshops' were organized in Jülich, Stockholm and Hohenkammer. Then it was time for a change and redefinition of the scope of the symposium to reflect the new requirements of ITER and the ongoing evolution in the field. Under the new name (PFMC-11), the workshop was first organized in 2006 in Greifswald, Germany and PFMC-12 took place in Jülich in 2009. Initially starting in 1985 with about 40 participants as a 1.5 day workshop, the event has continuously grown to about 220 participants at PFMC-12. Due to the joint organization with FEMaS-1, PFMC-13 set a new record with more than 280 participants. The European project Fusion Energy Materials Science, FEMaS, coordinated by the Max-Planck-Institut für Plasmaphysik (IPP), organizes and stimulates cooperative research activities which involve large-scale research facilities as well as other top-level materials characterization laboratories. Five different fields are addressed: benchmarking experiments for radiation damage modelling, the application of micro-mechanical characterization methods, synchrotron and neutron radiation-based techniques and advanced nanoscopic analysis based on transmission electron microscopy. All these fields need to be exploited further by the fusion materials community for timely materials solutions for a DEMO reactor. In order to integrate these materials research fields, FEMaS acted as a co-organizer for the 2011 workshop and successfully introduced a number of participants from research labs and universities into the PFMC community. Plasma-facing materials experience particularly hostile conditions as they are

  1. Symposium introduction: the first joint American Chemical Society Agricultural and Food Chemistry Division and the American Chemical Society International Chemical Sciences Chapter in Thailand

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The American Chemical Society (ACS) Agricultural and Food Chemistry Division (AGFD) and the ACS International Chemical Sciences Chapter in Thailand (ICSCT) worked together to stage the “1st Joint ACS AGFD - ACS ICSCT Symposium on Agricultural and Food Chemistry,” which was held in Bangkok, Thailand ...

  2. Joint instability and osteoarthritis.

    PubMed

    Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

    2015-01-01

    Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA. PMID:25741184

  3. Joint x-ray

    MedlinePlus

    X-ray - joint; Arthrography; Arthrogram ... x-ray technologist will help you position the joint to be x-rayed on the table. Once in place, pictures are taken. The joint may be moved into other positions for more ...

  4. Joint Instability and Osteoarthritis

    PubMed Central

    Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

    2015-01-01

    Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA. PMID:25741184

  5. PREFACE: 1st International School and Conference "Saint Petersburg OPEN 2014" on Optoelectronics, Photonics, Engineering and Nanostructures

    NASA Astrophysics Data System (ADS)

    2014-09-01

    Dear Colleagues, 1st International School and Conference "Saint Petersburg OPEN 2014" on Optoelectronics, Photonics, Engineering and Nanostructures was held on March 25 - 27, 2014 at St. Petersburg Academic University - Nanotechnology Research and Education Centre of the Russian Academy of Sciences. The School and Conference included a series of invited talks given by leading professors with the aim to introduce young scientists with actual problems and major advances in physics and technology. The keynote speakers were: Mikhail Glazov (Ioffe Physico-Technical Institute RAS, Russia) Vladimir Dubrovskii (Saint Petersburg Academic University RAS, Russia) Alexey Kavokin (University of Southampton, United Kingdom and St. Petersburg State University, Russia) Vladimir Korenev (Ioffe Physico-Technical Institute RAS, Russia) Sergey Kukushkin (Institute of Problems of Mechanical Engineering RAS, Russia) Nikita Pikhtin (Ioffe Physico-Technical Institute RAS, Russia and "Elfolum" Ltd., Russia) Dmitry Firsov (Saint Petersburg State Polytechnical University, Russia) During the poster session all undergraduate and graduate students attending the conference presented their works. Sufficiently large number of participants with more than 160 student attendees from all over the world allowed the Conference to provide a fertile ground for the fruitful discussions between the young scientists as well as to become a perfect platform for the valuable discussions between student authors and highly experienced scientists. The best student papers, which were selected by the Program Committee and by the invited speakers basing on the theses and their poster presentation, were awarded with diplomas of the conference - see the photos. This year's School and Conference is supported by SPIE (The International Society for Optics and Photonics), OSA (The Optical Society), St. Petersburg State Polytechnical University and by Skolkovo Foundation. It is a continuation of the annual schools and

  6. Creating Research-Rich Learning Experiences and Quantitative Skills in a 1st Year Earth Systems Course

    NASA Astrophysics Data System (ADS)

    King, P. L.; Eggins, S.; Jones, S.

    2014-12-01

    We are creating a 1st year Earth Systems course at the Australian National University that is built around research-rich learning experiences and quantitative skills. The course has top students including ≤20% indigenous/foreign students; nonetheless, students' backgrounds in math and science vary considerably posing challenges for learning. We are addressing this issue and aiming to improve knowledge retention and deep learning by changing our teaching approach. In 2013-2014, we modified the weekly course structure to a 1hr lecture; a 2hr workshop with hands-on activities; a 2hr lab; an assessment piece covering all face-to-face activities; and a 1hr tutorial. Our new approach was aimed at: 1) building student confidence with data analysis and quantitative skills through increasingly difficult tasks in science, math, physics, chemistry, climate science and biology; 2) creating effective learning groups using name tags and a classroom with 8-person tiered tables; 3) requiring students to apply new knowledge to new situations in group activities, two 1-day field trips and assessment items; 4) using pre-lab and pre-workshop exercises to promote prior engagement with key concepts; 5) adding open-ended experiments to foster structured 'scientific play' or enquiry and creativity; and 6) aligning the assessment with the learning outcomes and ensuring that it contains authentic and challenging southern hemisphere problems. Students were asked to design their own ocean current experiment in the lab and we were astounded by their ingenuity: they simulated the ocean currents off Antarctica; varied water density to verify an equation; and examined the effect of wind and seafloor topography on currents. To evaluate changes in student learning, we conducted surveys in 2013 and 2014. In 2014, we found higher levels of student engagement with the course: >~80% attendance rates and >~70% satisfaction (20% neutral). The 2014 cohort felt that they were more competent in writing

  7. Analysis and study of the in situ observation of the June 1st 2008 CME by STEREO

    NASA Astrophysics Data System (ADS)

    Nieves-Chinchilla, T.; Gómez-Herrero, R.; Viñas, A. F.; Malandraki, O.; Dresing, N.; Hidalgo, M. A.; Opitz, A.; Sauvaud, J.-A.; Lavraud, B.; Davila, J. M.

    2011-07-01

    In this work we present a combined study of the counterpart of the coronal mass ejection (CME) of June 1st of 2008 in the interplanetary medium. This event has been largely studied because of its peculiar initiation and its possible forecasting consequences for space weather. We show an in situ analysis (on days June 6th-7th of 2008) of the CME in the interplanetary medium in order to shed some light on the propagation and evolution mechanisms of the interplanetary CME (ICME). The goals of this work are twofold: gathering the whole in situ data from PLASTIC and IMPACT onboard STEREO B in order to provide a complete characterization of the ICME, and to present a model where the thermal plasma pressure is included. The isolated ICME features show a clear forward shock which we identify as an oblique forward fast shock accelerating ions to a few-hundred keV during its passage. Following the shock, a flux rope is easily defined as a magnetic cloud (MC) by the magnetic field components and magnitude, and the low proton plasma-β. During the spacecraft passage through the MC, the energetic ion intensity shows a pronounced decrease, suggesting a closed magnetic topology, and the suprathermal electron population shows a density and temperature increase, demonstrating the importance of the electrons in the MC description. The in situ evidence suggests that there is no direct magnetic connection between the forward shock and the MC, and the characteristics of the reverse shock determined suggest that the shock pair is a consequence of the propagation of the ICME in the interplanetary medium. The energetic ions measured by the SEPT instrument suggest that their enhancement is not related to any solar event, but is solely due to the interplanetary shock consistent with the fact that no flares are observed on the Sun. The changes in the polarity of the interplanetary magnetic field in the vicinity of the ICME observed by electron PADs from SWEA are in accordance with the idea

  8. Spacesuit mobility knee joints

    NASA Technical Reports Server (NTRS)

    Vykukal, H. C. (Inventor)

    1979-01-01

    Pressure suit mobility joints are for use in interconnecting adjacent segments of an hermetically sealed spacesuit in which low torques, low leakage and a high degree of reliability are required. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics and includes linkages which restrain the joint from longitudinal distension and includes a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

  9. Spacesuit mobility joints

    NASA Technical Reports Server (NTRS)

    Vykukal, H. C. (Inventor)

    1978-01-01

    Joints for use in interconnecting adjacent segments of an hermetically sealed spacesuit which have low torques, low leakage and a high degree of reliability are described. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics. Linkages which restrain the joint from longitudinal distension and a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli are featured. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

  10. The crystal structure of maleylacetate reductase from Rhizobium sp. strain MTP-10005 provides insights into the reaction mechanism of enzymes in its original family.

    PubMed

    Fujii, Tomomi; Sato, Ai; Okamoto, Yuko; Yamauchi, Takae; Kato, Shiro; Yoshida, Masahiro; Oikawa, Tadao; Hata, Yasuo

    2016-08-01

    Maleylacetate reductase plays a crucial role in catabolism of resorcinol by catalyzing the NAD(P)H-dependent reduction of maleylacetate, at a carbon-carbon double bond, to 3-oxoadipate. The crystal structure of maleylacetate reductase from Rhizobium sp. strain MTP-10005, GraC, has been elucidated by the X-ray diffraction method at 1.5 Å resolution. GraC is a homodimer, and each subunit consists of two domains: an N-terminal NADH-binding domain adopting an α/β structure and a C-terminal functional domain adopting an α-helical structure. Such structural features show similarity to those of the two existing families of enzymes in dehydroquinate synthase-like superfamily. However, GraC is distinct in dimer formation and activity expression mechanism from the families of enzymes. Two subunits in GraC have different structures from each other in the present crystal. One subunit has several ligands mimicking NADH and the substrate in the cleft and adopts a closed domain arrangement. In contrast, the other subunit does not contain any ligand causing structural changes and adopts an open domain arrangement. The structure of GraC reveals those of maleylacetate reductase both in the coenzyme, substrate-binding state and in the ligand-free state. The comparison of both subunit structures reveals a conformational change of the Tyr326 loop for interaction with His243 on ligand binding. Structures of related enzymes suggest that His243 is likely a catalytic residue of GraC. Mutational analyses of His243 and Tyr326 support the catalytic roles proposed from structural information. The crystal structure of GraC characterizes the maleylacetate reductase family as a third family in the dehydroquinate synthase-like superfamily. Proteins 2016; 84:1029-1042. © 2016 Wiley Periodicals, Inc. PMID:27040018

  11. PREFACE: 1st Nano-IBCT Conference 2011 - Radiation Damage of Biomolecular Systems: Nanoscale Insights into Ion Beam Cancer Therapy

    NASA Astrophysics Data System (ADS)

    Huber, Bernd A.; Malot, Christiane; Domaracka, Alicja; Solov'yov, Andrey V.

    2012-07-01

    The 1st Nano-IBCT Conference entitled 'Radiation Damage in Biomolecular Systems: Nanoscale Insights into Ion Beam Cancer Therapy' was held in Caen, France, in October 2011. The Meeting was organised in the framework of the COST Action MP1002 (Nano-IBCT) which was launched in December 2010 (http://fias.uni-frankfurt.de/nano-ibct). This action aims to promote the understanding of mechanisms and processes underlying the radiation damage of biomolecular systems at the molecular and nanoscopic level and to use the findings to improve the strategy of Ion Beam Cancer Therapy. In the hope of achieving this, participants from different disciplines were invited to represent the fields of physics, biology, medicine and chemistry, and also included those from industry and the operators of hadron therapy centres. Ion beam therapy offers the possibility of excellent dose localization for treatment of malignant tumours, minimizing radiation damage in normal healthy tissue, while maximizing cell killing within the tumour. Several ion beam cancer therapy clinical centres are now operating in Europe and elsewhere. However, the full potential of such therapy can only be exploited by better understanding the physical, chemical and biological mechanisms that lead to cell death under ion irradiation. Considering a range of spatio-temporal scales, the proposed action therefore aims to combine the unique experimental and theoretical expertise available within Europe to acquire greater insight at the nanoscopic and molecular level into radiation damage induced by ion impact. Success in this endeavour will be both an important scientific breakthrough and give great impetus to the practical improvement of this innovative therapeutic technique. Ion therapy potentially provides an important advance in cancer therapy and the COST action MP1002 will be very significant in ensuring Europe's leadership in this field, providing the scientific background, required data and mechanistic insight which

  12. Joint fluid Gram stain

    MedlinePlus

    Gram stain of joint fluid ... A sample of joint fluid is needed. The fluid sample is sent to a lab where a small drop is placed in a ... on how to prepare for the removal of joint fluid, see joint fluid aspiration .

  13. Butt Joint Tool Commissioning

    SciTech Connect

    Martovetsky, N N

    2007-12-06

    ITER Central Solenoid uses butt joints for connecting the pancakes in the CS module. The principles of the butt joining of the CICC were developed by the JAPT during CSMC project. The difference between the CSMC butt joint and the CS butt joint is that the CS butt joint is an in-line joint, while the CSMC is a double joint through a hairpin jumper. The CS butt joint has to carry the hoop load. The straight length of the joint is only 320 mm, and the vacuum chamber around the joint has to have a split in the clamp shell. These requirements are challenging. Fig.1 presents a CSMC joint, and Fig.2 shows a CS butt joint. The butt joint procedure was verified and demonstrated. The tool is capable of achieving all specified parameters. The vacuum in the end was a little higher than the target, which is not critical and readily correctable. We consider, tentatively that the procedure is established. Unexpectedly, we discover significant temperature nonuniformity in the joint cross section, which is not formally a violation of the specs, but is a point of concern. All testing parameters are recorded for QA purposes. We plan to modify the butt joining tool to improve its convenience of operation and provide all features necessary for production of butt joints by qualified personnel.

  14. Three-dimensional analysis of the distal movement of maxillary 1st molars in patients fitted with mini-implant-aided trans-palatal arches

    PubMed Central

    Miresmaeili, Amirfarhang; Sajedi, Ahmad; Moghimbeigi, Abbas

    2015-01-01

    Objective The aim of this study was to investigate three-dimensional molar displacement after distalization via miniscrews and a horizontal modification of the trans-palatal-arch (TPA). Methods The subjects in this clinical trial were 26 Class II patients. After the preparation of a complete set of diagnostic records, miniscrews were inserted between the maxillary 2nd premolar and 1st molar on the palatal side. Elastic modules connected to the TPA exerting an average force of 150-200 g/side parallel to the occlusal plane were applied. Cone-beam computed tomography was utilized to evaluate the position of the miniscrews relative to the adjacent teeth and maxillary sinus, and the direction of force relative to molar furcation. The distances from the central point of the incisive papilla to the mesiopalatal cusps of the 1st maxillary molars and the distances between the mesiopalatal cusps of the left and right molars were measured to evaluate displacement of the maxillary molars on the horizontal plane. Interocclusal space was used to evaluate vertical changes. Results Mean maxillary 1st molar distalization was 2.3 ± 1.1 mm, at a rate of 0.4 ± 0.2 mm/month, and rotation was not significant. Intermolar width increased by 2.9 ± 1.8 mm. Molars were intruded relative to the neighboring teeth, from 0.1 to 0.8 mm. Conclusions Distalization of molars was possible without extrusion, using the appliance investigated. The intrusive component of force reduced the rate of distal movement. PMID:26445718

  15. [Influence of hypocaloric diet with addition of a vitamin-mineral complex on status of patients with obesity 1st and 2nd degrees].

    PubMed

    Sharafetdinov, Kh Kh; Plotnikova, O A; Zykina, V V; Mal'tsev, G Iu; Sokol'nikov, A A; Kaganov, B S

    2011-01-01

    Addition of a vitamin-mineral complex (VMC) to a standard hypocaloric diet leads to a positive dynamics of antropometric characteristics in patients with obesity 1st and 2nd degrees which is comparable to effectiveness of standard dietotherapy (dietary treatment) traditionally used in complex treatment of obesity. Addition of 1,8 mg of vitamin B2 as part of VMC to a hypocaloric diet is shown to be inadequate in eradication of marginal provision of riboflavin when using diets reduced in calories. PMID:22232885

  16. The Earth Microbiome Project: The Meeting Report for the 1st International Earth Microbiome Project Conference, Shenzhen, China, June 13th-15th 2011

    PubMed Central

    Gilbert, Jack A.; Bailey, Mark; Field, Dawn; Fierer, Noah; Fuhrman, Jed A.; Hu, Bin; Jansson, Janet; Knight, Rob; Kowalchuk, George A.; Kyrpides, Nikos C.; Meyer, Folker; Stevens, Rick

    2011-01-01

    This report details the outcome of the 1st International Earth Microbiome Project Conference. The 2-day conference was held at the Kingkey Palace Hotel, Shenzhen, China, on the 14th-15th June 2011, and was hosted by BGI (formally the Beijing Genomics Institute). The conference was arranged as a formal launch for the Earth Microbiome Project, to highlight some of the exciting research projects, results of the preliminary pilot studies, and to provide a discussion forum for the types of technology and experimental approaches that will come to define the standard operating procedures of this project.

  17. A Comparison of In-Channel Dead Zone and Hyporheic Zone Transient Storage Parameter Estimates Between a 1st and 5th Order Stream

    NASA Astrophysics Data System (ADS)

    Briggs, M.; Gooseff, M.; Morkeski, K.; Wollheim, W.; Hopkinson, C.; Peterson, B.; Vorosmarty, C.

    2007-12-01

    A major enhancement to our understanding of how watersheds function would be the ability to discriminate between in-channel dead zone ( DZ) and hyporheic zone ( HZ) transient storage, and an evaluation of how these properties scale across stream orders. The nature of DZ storage is to display faster exchange rates with the main channel and less overall sediment contact time than HZ storage. These differences have great significance to many in-stream processes such as nutrient cycling. The combination of high slope, coarse bed material and fluvial structure endemic to many 1st order streams can provide greater forcing of hyporheic flow paths than occurs within the lower gradient 5th order streams. Conversely many 5th order reaches exhibit large side pool and back eddy DZ areas not common along 1st order streams. This study builds on existing methods to delineate the DZ and HZ from the integrated signal of a conservative solute's breakthrough curve ( BTC). Data for this comparison were collected over the summer of 2007 within the Ipswich River watershed, a basin which drains into Plum Island Sound on the north shore of Massachusetts, USA. The conservative solute NaCl was injected into both a 1st order medium gradient stream and a 5th order low gradient stream. The BTCs collected in thalwegs from the NaCl injections were simulated using a version of the solute transport model OTIS containing two zones of transient storage. Hydrometric measurements of stream velocity were used to estimate average main channel cross sectional area ( A) and DZ cross sectional area ( ASDZ) for each reach to constrain parameter estimates and avoid model equifinality between the storage zones. Initial values for the exchange rate between main channel flow and DZ storage ( αDZ) were estimated from DZ BTCs. Our results indicate that although the overall storage zone is much larger in proportion to the main channel for the 1st order reach than for the 5th order reach, the percentage of median

  18. Metatarsal phalangeal joint arthroscopy.

    PubMed

    Shonka, T E

    1991-01-01

    An overview of metatarsophalangeal joint (MPJ) arthroscopy is presented. Indications, technique, and perioperative management are discussed. The author believes it is the operative treatment of choice for various pathology encountered in this joint. PMID:2002183

  19. Culture - joint fluid

    MedlinePlus

    Joint fluid culture ... fungi, or viruses grow. This is called a culture. If these germs are detected, other tests may ... is no special preparation needed for the lab culture. How to prepare for the removal of joint ...

  20. Hip joint replacement - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100006.htm Hip joint replacement - series—Normal anatomy To use the sharing ... to slide 5 out of 5 Overview The hip joint is made up of two major parts: the ...

  1. Hip joint injection

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007633.htm Hip joint injection To use the sharing features on this ... injection is a shot of medicine into the hip joint. The medicine helps relieve pain and inflammation. It ...

  2. Hip joint replacement

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002975.htm Hip joint replacement To use the sharing features on this page, please enable JavaScript. Hip joint replacement is surgery to replace all or part ...

  3. Knee joint replacement - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100088.htm Knee joint replacement - series—Normal anatomy To use the sharing ... of 4 Overview The knee is a complex joint. It contains the distal end of the femur ( ...

  4. Knee joint replacement

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002974.htm Knee joint replacement To use the sharing features on this page, please enable JavaScript. Knee joint replacement is a surgery to replace a knee ...

  5. Large displacement spherical joint

    DOEpatents

    Bieg, Lothar F.; Benavides, Gilbert L.

    2002-01-01

    A new class of spherical joints has a very large accessible full cone angle, a property which is beneficial for a wide range of applications. Despite the large cone angles, these joints move freely without singularities.

  6. Temporomandibular Joint Dysfunction

    MedlinePlus

    The temporomandibular joint (TMJ) connects your jaw to the side of your head. When it works well, it enables you to ... For people with TMJ dysfunction, problems with the joint and muscles around it may cause Pain that ...

  7. Sacroiliac joint pain - aftercare

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000610.htm Sacroiliac joint pain - aftercare To use the sharing features on this page, please enable JavaScript. The sacroiliac joint (SIJ) is a term used to describe the ...

  8. Clinical Performance of the 1st American Academy of Orthopaedic Surgeons Clinical Guideline on Prevention of Symptomatic Pulmonary Embolism after Total Knee Arthroplasty in Korean Patients

    PubMed Central

    2015-01-01

    We sought to document the clinical performance of the 1st American Academy of Orthopaedic Surgeons (AAOS) guideline on the prevention of symptomatic pulmonary embolism (PE) after total knee arthroplasty (TKA) in Korean patients, in terms of the proportions of the each risk-stratified group, efficacy and safety. Consecutive 328 patients underwent TKA were preoperatively assessed for the risks of PE and bleeding and categorized into 4 groups: 1) standard risk, 2) high risk for PE, 3) high risk for bleeding, and 4) high risks both for PE and bleeding. One of three options was administered according to the groups (aspirin in group 1 or 4; enoxaparin and following aspirin in group 2; antithrombotic stocking in group 3). Incidences of symptomatic deep vein thrombosis (DVT) and PE, and major or minor bleeding complications were evaluated. Majority of the patients (86%) were assessed to be with standard risks both for PE and bleeding. No patient experienced symptomatic DVT or PE and major bleeding. Eleven percent of the patients discontinued chemoprophylaxis because of bleeding-related wound complication. In conclusion, the 1st AAOS guideline functions successfully in Korean patients undergoing TKA in terms of prevention of symptomatic DVT and PE while avoiding major bleeding complications. PMID:26713064

  9. Sacroiliac joint imaging.

    PubMed

    Tuite, Michael J

    2008-03-01

    The sacroiliac (SI) joint has several unique anatomical features that make it one of the more challenging joints to image. The joint is difficult to profile well on radiographic views, and therefore the radiographic findings of sacroiliitis are often equivocal. Computed tomography images can usually show the findings of sacroiliitis and osteoarthritis earlier than radiographs. Magnetic resonance imaging performed with proper sequences is excellent for diagnosing even very early sacroiliitis and for following treatment response. The SI joint is often involved in patients with osteoarthritis or one of the inflammatory spondyloarthritides, most notably ankylosing spondylitis. Ankylosing spondylitis often presents with sacroiliitis, which appears as erosions, sclerosis, and joint space narrowing, eventually leading to ankylosis. Several disorders can cause sacroiliitis-like changes of the joint, including hyperparathyroidism and repetitive shear-stress injuries in athletes. The joint can become painful during pregnancy as it widens and develops increased motion, and some postpartum women develop iliac sclerosis adjacent to the joint termed osteitis condensans ilii. Another cause of SI joint pain is a disorder called sacroiliac joint dysfunction, which typically has few abnormal imaging findings. Patients with SI joint dysfunction, as well as sacroiliitis, often get relief from image-guided SI joint therapeutic injections. PMID:18382946

  10. Joint Enrollment Report, 2014

    ERIC Educational Resources Information Center

    Iowa Department of Education, 2014

    2014-01-01

    The Iowa Department of Education collects information on joint enrollment in Iowa's 15 community colleges. Jointly enrolled students are high school students enrolled in community college credit coursework. Most jointly enrolled students enroll through Senior Year Plus (SYP) programs such as Postsecondary Enrollment Options (PSEO) and concurrent…

  11. Arch & Chord Joint Detail; Crossbracing Center Joint Detail; Chord, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Arch & Chord Joint Detail; Crossbracing Center Joint Detail; Chord, Panel Post, Tie & Diagonal Brace Joint Detail; Chord, Panel Post, Tie & Crossbracing Joint Detail - Dunlapsville Covered Bridge, Spanning East Fork Whitewater River, Dunlapsville, Union County, IN

  12. Local slope, hillslope length and upslope unstable area as 1st order controls on co-seismic landslide hazard.

    NASA Astrophysics Data System (ADS)

    Milledge, D.; Densmore, A. L.; Petley, D. N.; Bellugi, D. G.; Li, G.

    2015-12-01

    Many communities in mountainous areas have limited access to and/or understanding of co-seismic landslide hazard maps. Furthermore these maps rarely provide the information that a community seeks: Where is safest? How big could the landslide be? Geomorphic intuition suggests that: 1) on the ridges one is less likely to be hit by a landslide than elsewhere in the landscape; 2) hazard increases with the amount of upslope unstable area; 3) longer slopes contain more candidate landslides and are also capable of producing larger landslides thus they constitute a more severe hazard. These observations could help communities in siting infrastructure or making earthquake plans but have not, to our knowledge, been tested against past landslide inventories. Co-seismic landslide models make no attempt to predict landslide size and focus on initiation, ignoring the runout which is critical in the slope length control on hazard. Here we test our intuitive hypotheses using an inventory of co-seismic landslides from the 2008 Wenchuan earthquake. The inventory is mapped from high-resolution remote imagery using an automated algorithm and manual delineation and does not distinguish between source and runout zones. Discretizing the study area into 30 m cells we define landslide hazard as the probability that a cell is within a mapped landslide polygon (p(ls)). We find that p(ls) increases rapidly with increasing slope and upslope area. Locations with low local slope (<10˚) or upslope area (<900 m2/m) have p(ls) less than one third of the areal average. The joint p(ls) conditional on local slope and upslope area identifies long steep slopes as particularly hazardous and ridges (where slope and upslope area are both low) as particularly low hazard. Examining the slope lengths associated with each landslide in the inventory we find that hillslope length sets an upper limit on landslide size but that its influence on the detailed size distribution is more difficult to untangle. Finally

  13. Correlation and fractional analysis of synovial fluid microscopic images for diagnostics and differentiation of pathological conditions in joints

    NASA Astrophysics Data System (ADS)

    Kvasniuk, D. I.; Vasyuk, V. L.

    2011-09-01

    In this paper, was given the basis of the method of spectral Stokes polarimetry of human synovial fluid. The optical model of polycrystalline networks of human knee joint synovial fluid is suggested. The results of investigating the interrelation between the values of statistical (statistical moments of the 1st-4th order), correlation (correlation area, asymmetry coefficient and autocorrelation function excess) and fractal (dispersion of logarithmic dependencies of power spectra) parameters are presented. They characterize spectral distributions of polarization azimuth and ellipticity of the body's electromagnetic radiation and dynamics of change in optical anisotropy of this biological object. The diagnostic criteria of human knee joint inflammation processes are determined.

  14. Correlation and fractional analysis of synovial fluid microscopic images for diagnostics and differentiation of pathological conditions in joints

    NASA Astrophysics Data System (ADS)

    Kvasniuk, D. I.; Vasyuk, V. L.

    2012-01-01

    In this paper, was given the basis of the method of spectral Stokes polarimetry of human synovial fluid. The optical model of polycrystalline networks of human knee joint synovial fluid is suggested. The results of investigating the interrelation between the values of statistical (statistical moments of the 1st-4th order), correlation (correlation area, asymmetry coefficient and autocorrelation function excess) and fractal (dispersion of logarithmic dependencies of power spectra) parameters are presented. They characterize spectral distributions of polarization azimuth and ellipticity of the body's electromagnetic radiation and dynamics of change in optical anisotropy of this biological object. The diagnostic criteria of human knee joint inflammation processes are determined.

  15. Effect of milk feed source, frequency of feeding and age at turnout on calf performance, live-weight at mating and 1st lactation milk production

    PubMed Central

    2012-01-01

    Female calves (n = 108) were assigned to 6 cold milk feeding treatments in two experiments for a 70-day period. Live-weight (LW) was measured weekly, with an additional LW taken at day 410 and post-calving for animals in experiment 1. In Experiment 1, the effect of feeding frequency and age of turnout to pasture on calf performance and 1st lactation milk yields were evaluated. The whole milk (WM) feeding treatments applied were (i) once daily feeding (OD), (ii) twice daily feeding (TD), (iii) OD feeding, outdoors at 38 days (ODO). In Experiment 2, the effects of feeding milk replacer (MR) as opposed to WM and age of turnout to pasture on calf performance were evaluated. The treatments applied were (i) OD feeding with WM (OD), (ii) OD feeding with milk replacer (MR) (ODMR), (iii) OD feeding with MR, outdoors at 38 days (ODMRO). Experiment 1: There were no differences (P > 0.05) in LW or average daily gain between TD and OD calves at day 80 or 410. ODO calves had lower LW at day 80 as compared to OD or TD (P < 0.001). Calf LW at day 80 was 86, 89 and 85 kg and at day 410 was 304, 309 and 316 kg for OD, TD and ODO, respectively. Milk feeding frequency or time of calf turnout had no effect on LW post calving, milk composition or 1st lactation milk yields. Experiment 2: Total LW at day 80 was higher (P < 0.05) for ODMR compared to OD or ODMRO calves. Calf LW was 87, 95, and 88 kg for OD, ODMR and ODMRO, respectively. However, LW at day 410 did not differ between treatments. This study showed that while some differences were observed in calf LW at day 80, these differences had no effect on LW at day 410 or 1st lactation milk yield. It can be concluded that calves can be successfully reared when fed OD with WM or MR, indoors and when turned out to pasture at 38 days of age. PMID:23078871

  16. Spatial epidemiology in zoonotic parasitic diseases: insights gained at the 1st International Symposium on Geospatial Health in Lijiang, China, 2007

    PubMed Central

    Zhou, Xiao-Nong; Lv, Shan; Yang, Guo-Jing; Kristensen, Thomas K; Bergquist, N Robert; Utzinger, Jürg; Malone, John B

    2009-01-01

    The 1st International Symposium on Geospatial Health was convened in Lijiang, Yunnan province, People's Republic of China from 8 to 9 September, 2007. The objective was to review progress made with the application of spatial techniques on zoonotic parasitic diseases, particularly in Southeast Asia. The symposium featured 71 presentations covering soil-transmitted and water-borne helminth infections, as well as arthropod-borne diseases such as leishmaniasis, malaria and lymphatic filariasis. The work made public at this occasion is briefly summarized here to highlight the advances made and to put forth research priorities in this area. Approaches such as geographical information systems (GIS), global positioning systems (GPS) and remote sensing (RS), including spatial statistics, web-based GIS and map visualization of field investigations, figured prominently in the presentation. PMID:19193214

  17. Pipeline joint protector

    SciTech Connect

    Baker, R.

    1989-02-28

    This patent describes a weight coated pipeline joint protective apparatus for protecting pipeline joints against impact or high stress concentrations. It consists of a high density plastic sheet wrapped around a pipeline joint with the opposite edges of such sheet overlaying the weight of coat material on the abutting pipes forming the joint. The first end of the sheet overlaps the wrapped sheet with means for securing such first end to the sheet surface near or adjacent to the opposite end of such sheet.

  18. Compound solder joints

    NASA Technical Reports Server (NTRS)

    Batista, R. I.; Simonson, R. B.

    1976-01-01

    Joining technique prevents contamination, may be used to join dissimilar metal tubes, minimizes fluid and gas entrapment, expedites repairs, and can yield joints having leakage rates less than 0.000001 standard cubic cm He/min. Components of joint are solder sleeve, two solder rings, Teflon sleeve, and tubing to be joined.

  19. Wedge Joints for Trusses

    NASA Technical Reports Server (NTRS)

    Wood, Kenneth E.

    1987-01-01

    Structure assembled rapidly with simple hand tools. Proposed locking wedge joints enable rapid assembly of lightweight beams, towers, scaffolds, and other truss-type structures. Lightweight structure assembled from tubular struts joined at nodes by wedge pins fitting into mating slots. Joint assembled rapidly by seating wedge pin in V-shaped slots and deforming end of strut until primary pawl engages it.

  20. "Nonfloating" universal joint

    NASA Technical Reports Server (NTRS)

    Appleberry, W. T.

    1978-01-01

    Modified crowned-spline joint is lightweight, durable, and requires minimum of parts. It does not use rubber cushions to limit play and is useful over wide temperature range. It has inner ball and socket to provide rigid connection with no axial play. Joint can be adapted to form pinned connection between segmented torque tubes.

  1. Sacroiliac joint pain - aftercare

    MedlinePlus

    The sacroiliac joint (SIJ) is a term used to describe the place where the sacrum and the iliac bones join. The ... The main purpose of the joint is to connect the spine and the pelvis. As a result, there is very little movement at the SIJ. Major reasons ...

  2. FOREWORD: 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications/1st International Conference on Fusion Energy Materials Science 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications/1st International Conference on Fusion Energy Materials Science

    NASA Astrophysics Data System (ADS)

    Jacob, Wolfgang; Linsmeier, Christian; Rubel, Marek

    2011-12-01

    The 13th International Workshop on Plasma-Facing Materials and Components (PFMC-13) jointly organized with the 1st International Conference on Fusion Energy Materials Science (FEMaS-1) was held in Rosenheim (Germany) on 9-13 May 2011. PFMC-13 is a successor of the International Workshop on Carbon Materials for Fusion Applications series. Between 1985 and 2003 ten 'Carbon Workshops' were organized in Jülich, Stockholm and Hohenkammer. Then it was time for a change and redefinition of the scope of the symposium to reflect the new requirements of ITER and the ongoing evolution in the field. Under the new name (PFMC-11), the workshop was first organized in 2006 in Greifswald, Germany and PFMC-12 took place in Jülich in 2009. Initially starting in 1985 with about 40 participants as a 1.5 day workshop, the event has continuously grown to about 220 participants at PFMC-12. Due to the joint organization with FEMaS-1, PFMC-13 set a new record with more than 280 participants. The European project Fusion Energy Materials Science, FEMaS, coordinated by the Max-Planck-Institut für Plasmaphysik (IPP), organizes and stimulates cooperative research activities which involve large-scale research facilities as well as other top-level materials characterization laboratories. Five different fields are addressed: benchmarking experiments for radiation damage modelling, the application of micro-mechanical characterization methods, synchrotron and neutron radiation-based techniques and advanced nanoscopic analysis based on transmission electron microscopy. All these fields need to be exploited further by the fusion materials community for timely materials solutions for a DEMO reactor. In order to integrate these materials research fields, FEMaS acted as a co-organizer for the 2011 workshop and successfully introduced a number of participants from research labs and universities into the PFMC community. Plasma-facing materials experience particularly hostile conditions as they are

  3. MISR JOINT_AS Data

    Atmospheric Science Data Center

    2014-07-21

    Joint Aerosol Product (JOINT_AS) The MISR Level 3 Products are global or regional ... field campaigns at daily and monthly time scales. The Joint Aerosol product provides a monthly global statistical summary of MISR ...

  4. Putting the Students 1st

    ERIC Educational Resources Information Center

    Ziegler, Elizabeth

    2005-01-01

    This article profiles Randy Jensen, the 2005 MetLife/NASSP National Middle Level Principal of the Year. As the principal of William Thomas Middle School in American Falls, Idaho, Jensen is a committed advocate for his students as they grapple with the challenges that come with being an adolescent and has adopted an open-door policy with his school…

  5. GALEX 1st Light Compilation

    NASA Technical Reports Server (NTRS)

    2003-01-01

    This compilation shows the constellation Hercules, as imaged on May 21 and 22 by NASA's Galaxy Evolution Explorer. The images were captured by the two channels of the spacecraft camera during the mission's 'first light' milestone.

    The Galaxy Evolution Explorer first light images are dedicated to the crew of the Space Shuttle Columbia. The Hercules region was directly above Columbia when it made its last contact with NASA Mission Control on February 1, over the skies of Texas.

    The Galaxy Evolution Explorer launched on April 28 on a mission to map the celestial sky in the ultraviolet and determine the history of star formation in the universe over the last 10 billion years.

  6. Pressure vessel flex joint

    NASA Technical Reports Server (NTRS)

    Kahn, Jon B. (Inventor)

    1992-01-01

    An airtight, flexible joint is disclosed for the interfacing of two pressure vessels such as between the Space Station docking tunnel and the Space Shuttle Orbiter bulkhead adapter. The joint provides for flexibility while still retaining a structural link between the two vessels required due to the loading created by the internal/external pressure differential. The joint design provides for limiting the axial load carried across the joint to a specific value, a function returned in the Orbiter/Station tunnel interface. The flex joint comprises a floating structural segment which is permanently attached to one of the pressure vessels through the use of an inflatable seal. The geometric configuration of the joint causes the tension between the vessels created by the internal gas pressure to compress the inflatable seal. The inflation pressure of the seal is kept at a value above the internal/external pressure differential of the vessels in order to maintain a controlled distance between the floating segment and pressure vessel. The inflatable seal consists of either a hollow torus-shaped flexible bladder or two rolling convoluted diaphragm seals which may be reinforced by a system of straps or fabric anchored to the hard structures. The joint acts as a flexible link to allow both angular motion and lateral displacement while it still contains the internal pressure and holds the axial tension between the vessels.

  7. First metatarsophalangeal joint arthrodesis.

    PubMed

    Rajczy, Robert M; McDonald, Patrick R; Shapiro, Howard S; Boc, Steven F

    2012-01-01

    Arthrodesis of the first metatarsophalangeal joint (MTPJ) is used primarily for end-stage hallux rigidus whereby pain, crepitus, and limitation of motion is noted at the joint. Arthrodesis at the first MTPJ also has it uses as a primary procedure for rheumatoid arthritis when severe deformity is present, as well as for salvage procedures for failed joint arthroplasties with or without implant, fractures with intra-articular extension, avascular necrosis, and infection management. A first MTPJ arthrodesis should provide stable fixation, attain suitable positioning for a reasonable gait, maintain adequate length, and create a stable platform for a plantigrade foot type. PMID:22243568

  8. Compliant Joints For Robots

    NASA Technical Reports Server (NTRS)

    Kerley, James J., Jr.

    1990-01-01

    Compliant joints devised to accommodate misalignments of tools and/or workpieces with respect to robotic manipulators. Has characteristics and appearance of both universal-joint and cable-spring-type flexible shaft coupling. Compliance derived from elastic properties of short pieces of cable. Compliance of joint determined by lengths, distances between, relative orientations, thickness of strands, number of strands, material, amount of pretwist, and number of short pieces of cable. Worm-drive mechanism used to adjust lengths to vary compliance as needed during operation.

  9. Stable isotopic evidence for diet at the Imperial Roman coastal site of Velia (1st and 2nd centuries AD) in Southern Italy.

    PubMed

    Craig, Oliver E; Biazzo, Marco; O'Connell, Tamsin C; Garnsey, Peter; Martinez-Labarga, Cristina; Lelli, Roberta; Salvadei, Loretana; Tartaglia, Gianna; Nava, Alessia; Renò, Lorena; Fiammenghi, Antonella; Rickards, Olga; Bondioli, Luca

    2009-08-01

    Here we report on a stable isotope palaeodietary study of a Imperial Roman population interred near the port of Velia in Southern Italy during the 1st and 2nd centuries AD. Carbon and nitrogen stable isotope analyses were performed on collagen extracted from 117 adult humans as well as a range of fauna to reconstruct individual dietary histories. For the majority of individuals, we found that stable isotope data were consistent with a diet high in cereals, with relatively modest contributions of meat and only minor contributions of marine fish. However, substantial isotopic variation was found within the population, indicating that diets were not uniform. We suggest that a number of individuals, mainly but not exclusively males, had greater access to marine resources, especially high trophic level fish. However, the observed dietary variation did not correlate with burial type, number of grave goods, nor age at death. Also, individuals buried at the necropolis at Velia ate much less fish overall compared with the contemporaneous population from the necropolis of Portus at Isola Sacra, located on the coast close to Rome. Marine and riverine transport and commerce dominated the economy of Portus, and its people were in a position to supplement their own stocks of fish with imported goods in transit to Rome, whereas at Velia marine exploitation existed side-by-side with land-based economic activities. PMID:19280672

  10. Report on: "The 1st Workshop on National Immunization Programs and Vaccine Coverage in ASEAN Countries, April 30, 2015, Pattaya, Thailand".

    PubMed

    Hattasingh, Weerawan; Pengsaa, Krisana; Thisyakorn, Usa

    2016-03-01

    The 1st Workshop on National Immunization Programs and Vaccine Coverage in Association of Southeast Asian Nations (ASEAN) Countries Group (WNIPVC-ASEAN) held a meeting on April 30, 2015, Pattaya, Thailand under the auspices of the Pediatric Infectious Diseases Society and the World Health Organization (WHO). Reports on the current status and initiatives of the national immunization program (NIP) in each ASEAN countries that attended were presented. These reports along with survey data collected from ministries of health in ASEAN countries NIPs demonstrate that good progress has been made toward the goal of the Global Vaccine Action Plan (GVAP). However, some ASEAN countries have fragile health care systems that still have insufficient vaccine coverage of some basic EPI antigens. Most ASEAN countries still do not have national coverage of some new and underused vaccines, and raising funds for the expansion of NIPs is challenging. Also, there is insufficient research into disease burden of vaccine preventable diseases and surveillance. Health care workers must advocate NIPs to government policy makers and other stakeholders as well as improve research and surveillance to achieve the goals of the GVAP. PMID:26805596

  11. Report from the 1st Cardiovascular Outcome Trial (CVOT) Summit of the Diabetes & Cardiovascular Disease (D&CVD) EASD Study Group.

    PubMed

    Schnell, Oliver; Standl, Eberhard; Catrinoiu, Doina; Genovese, Stefano; Lalic, Nebojsa; Skra, Jan; Valensi, Paul; Ceriello, Antonio

    2016-01-01

    The 1st Cardiovascular Outcome Trial (CVOT) Summit of the Diabetes & Cardiovascular Disease (D&CVD) EASD Study Group was held during the annual meeting on 30 October 2015 in Munich. This summit was organized in light of recently published and numerous ongoing CVOTs on diabetes, which have emerged in response to the FDA and the EMA Guidelines. The CVOT Summit stands as a novel conference setup, with the aim of serving as a reference meeting for all topics related to CVOTs in diabetes. Members of the steering committee of the D&CVD EASD Study Group constitute the backbone of the summit. It included presentations of key results on DPP-4 inhibitors, GLP-1-Analogues, SGLT-2 inhibitors, acarbose and insulins. Diabetologists' and cardiologists' perspective on the potential need of new study designs were also highlighted. Furthermore, panel discussions on the design of CVOTs on diabetes were included in the program. The D&CVD EASD Study Group will continue its activity. In-depth discussions and presentations of new CVOTs like LEADER, will be resumed at the 2nd CVOT on diabetes of the D&CVD EASD Study Group, which will be held from 20-22 October 2016 in Munich ( http://www.dcvd.org). PMID:26892706

  12. Improved orthopedic arm joint

    NASA Technical Reports Server (NTRS)

    Dane, D. H.

    1971-01-01

    Joint permits smooth and easy movement of disabled arm and is smaller, lighter and less expensive than previous models. Device is interchangeable and may be used on either arm at the shoulder or at the elbow.

  13. Knee joint replacement

    MedlinePlus

    The results of a total knee replacement are often excellent. The operation relieves pain for most people. Most people do not need help walking after they fully recover. Most artificial knee joints last 10 ...

  14. Joint fluid Gram stain

    MedlinePlus

    Gram stain of joint fluid ... result means no bacteria are present on the Gram stain. Normal value ranges may vary slightly among ... Abnormal results mean bacteria were seen on the Gram stain. This may be a sign of a ...

  15. Temporomandibular Joint Disorder

    MedlinePlus

    ... 2008 Previous Next Related Articles: Temporomandibular Joint Disorder (TMD) Are You Biting Off More Than You Can Chew? Equilibration May Lessen TMD Pain Fender-benders: Source of TMD? First Comes ...

  16. A symptomatic coracoclavicular joint.

    PubMed

    Cheung, T F S; Boerboom, A L; Wolf, R F E; Diercks, R L

    2006-11-01

    Bilateral coracoclavicular joints were found in a 44-year-old male patient following a fall. He had an Indonesian mother and a Dutch father. Prior to the injury he was asymptomatic and had full range of movement in both shoulders but the trauma resulted in pain and limitation of movement in the left shoulder which required resection of the anomalous joint, after which full pain-free movement was restored. PMID:17075101

  17. High pressure ceramic joint

    DOEpatents

    Ward, M.E.; Harkins, B.D.

    1993-11-30

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures. 4 figures.

  18. High pressure ceramic joint

    DOEpatents

    Ward, Michael E.; Harkins, Bruce D.

    1993-01-01

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

  19. Panel Post & Diagonal Brace Joint Detail; Crossbracing Center Joint ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Panel Post & Diagonal Brace Joint Detail; Crossbracing Center Joint Detail; Chord, Panel Post, Tie Bar, & Diagonal Brace Joint Detail; Chord, Tie Bar, & Crossbracing Joint Detail - Medora Bridge, Spanning East Fork of White River at State Route 235, Medora, Jackson County, IN

  20. PROSPECTIVE CHANGES IN SOCIETY BY 1980, INCLUDING SOME IMPLICATIONS FOR EDUCATION, REPORTS PREPARED FOR THE AREA CONFERENCE (1ST, DENVER, JUNE 29-JULY 1, 1966).

    ERIC Educational Resources Information Center

    MORPHET, EDGAR L.; RYAN, CHARLES O.

    FIFTEEN PAPERS RELATED TO VARIOUS ASPECTS OF PROJECTED SOCIAL CHANGE WERE PRESENTED AT THE FIRST AREA CONFERENCE OF "DESIGNING EDUCATION FOR THE FUTURE," AN EIGHT-STATE PROJECT OF JOINT ACTION BY ARIZONA, COLORADO, IDAHO, MONTANA, NEVADA, NEW MEXICO, UTAH, AND WYOMING. THE 15-YEAR PROJECTION FOCUSED UPON IMPLICATIONS FOR EDUCATION IN THE ROCKY…

  1. PREFACE: 1st International Workshop on Theoretical and Computational Physics: Condensed Matter, Soft Matter and Materials Physics & 38th National Conference on Theoretical Physics

    NASA Astrophysics Data System (ADS)

    2014-09-01

    This volume contains selected papers presented at the 38th National Conference on Theoretical Physics (NCTP-38) and the 1st International Workshop on Theoretical and Computational Physics: Condensed Matter, Soft Matter and Materials Physics (IWTCP-1). Both the conference and the workshop were held from 29 July to 1 August 2013 in Pullman hotel, Da Nang, Vietnam. The IWTCP-1 was a new activity of the Vietnamese Theoretical Physics Society (VTPS) organized in association with the 38th National Conference on Theoretical Physics (NCTP-38), the most well-known annual scientific forum dedicated to the dissemination of the latest development in the field of theoretical physics within the country. The IWTCP-1 was also an External Activity of the Asia Pacific Center for Theoretical Physics (APCTP). The overriding goal of the IWTCP is to provide an international forum for scientists and engineers from academia to share ideas, problems and solution relating to the recent advances in theoretical physics as well as in computational physics. The main IWTCP motivation is to foster scientific exchanges between the Vietnamese theoretical and computational physics community and world-wide scientists as well as to promote high-standard level of research and education activities for young physicists in the country. About 110 participants coming from 10 countries participated in the conference and the workshop. 4 invited talks, 18 oral contributions and 46 posters were presented at the conference. In the workshop we had one keynote lecture and 9 invited talks presented by international experts in the fields of theoretical and computational physics, together with 14 oral and 33 poster contributions. The proceedings were edited by Nguyen Tri Lan, Trinh Xuan Hoang, and Nguyen Ai Viet. We would like to thank all invited speakers, participants and sponsors for making the conference and the workshop successful. Nguyen Ai Viet Chair of NCTP-38 and IWTCP-1

  2. Present status of the global change observation mission 1st - water 'SHIZUKU' (GCOM-W1) and the advanced microwave scanning radiometer 2 (AMSR2)

    NASA Astrophysics Data System (ADS)

    Tsutsui, Hiroyuki; Imaoka, Keiji; Kachi, Misako; Maeda, Takeshi; Kasahara, Marehito; Ito, Norimasa; Oki, Taikan; Shimoda, Haruhisa

    2014-11-01

    The Global Change Observation Mission 1st - Water (CGOM-W1) or "SHIZUKU" was launched on May 18, 2012 (JST) from the JAXA's Tanegashima Space Center. Subsequently, the GCOM-W1 satellite was joined to the NASA's A-train orbit since June 29, 2012 to succeed observation by the Advanced Microwave Scanning Radiometer for EOS (AMSR-E) and to provide combined utilization with other A-train satellites. The Advanced Microwave Scanning Radiometer 2 (AMSR2), which is a successor of AMSR-E, onboard GCOM-W1 has started its scientific observation since July 3, 2012. AMSR-E was halted its scientific observation on October 4, 2011, but has restarted observation in slow antenna rotation rate since December 4, 2012 for cross-calibration with AMSR2. AMSR2 has multi-frequency, total-power microwave radiometer systems with dual polarization channels for all frequency bands, and continues AMSR-E observations: 1) Water vapor, 2) Cloud liquid water, 3) Precipitation, 4) SST, 5) Sea surface wind speed, 6) Sea ice concentration, 7) Snow depth, 8) Soil moisture. JAXA opened the AMSR2's brightness temperature products to the public since January 2013 after initial calibration/validation period by the GCOM-W1 Data Providing Service (https://gcomwl.jaxa.jp/). Thereafter, the retrieval algorithms of standard geophysical products for water vapor, cloud liquid water, precipitation, sea surface temperature, sea surface wind speed, sea ice concentration, snow depth and soil moisture were modified, and JAXA opened these standard geophysical products to the public since May 2013. In this paper, we present the present operation status of AMSR2.

  3. The truth about the 1st cycle Coulombic efficiency of LiNi1/3Co1/3Mn1/3O2 (NCM) cathodes.

    PubMed

    Kasnatscheew, J; Evertz, M; Streipert, B; Wagner, R; Klöpsch, R; Vortmann, B; Hahn, H; Nowak, S; Amereller, M; Gentschev, A-C; Lamp, P; Winter, M

    2016-02-01

    The 1st cycle Coulombic efficiency (CE) of LiNi1/3Co1/3Mn1/3O2 (NCM) at 4.6 V vs. Li/Li(+) has been extensively investigated in NCM/Li half cells. It could be proven that the major part of the observed overall specific capacity loss (in total 36.3 mA h g(-1)) is reversible and induced by kinetic limitations, namely an impeded lithiation reaction during discharge. A measure facilitating the lithiation reaction, i.e. a constant potential (CP) step at the discharge cut-off potential, results in an increase in specific discharge capacity of 22.1 mA h g(-1). This capacity increase during the CP step could be proven as a relithiation process by Li(+) content determination in NCM via an ICP-OES measurement. In addition, a specific capacity loss of approx. 4.2 mA h g(-1) could be determined as an intrinsic reaction to the NCM cathode material at room temperature (RT). In total, less than 10.0 mA h g(-1) (=28% of the overall capacity loss) can be attributed to irreversible reactions, mainly to irreversible structural changes of NCM. Thus, the impact of parasitic reactions, such as oxidative electrolyte decomposition, on the irreversible capacity is negligible and could also be proven by on-line MS. As a consequence, the determination of the amount of extracted Li(+) ("Li(+) extraction ratio") so far has been incorrect and must be calculated by the charge capacity (=delithiation amount) divided by the theoretical capacity. In a NCM/graphite full cell the relithiation amount during the constant voltage (CV) step is smaller than in the half cell, due to irreversible Li(+) loss at graphite. PMID:26771035

  4. Source Process of the Solomon Islands Earthquake of April 1st, 2007 (Mw8.1) Based on SAR Data and its Tectonic Implications

    NASA Astrophysics Data System (ADS)

    Mori, M.; Kato, T.; Furuya, M.; Ochi, T.; Miyazaki, S.; Aoki, Y.

    2008-12-01

    We analyzed SAR (Synthetic Aperture Radar) data to derive the crustal deformation due to the Solomon Islands earthquake (Mw8.1) that occurred on April 1st, 2007. Three tracks that cover the source areas were used and the image data taken before and after the earthquake were processed to make interferograms. Then, we examined the obtained interferograms if the previous two source models that were obtained by seismic wave form inversion analyses could reproduce them. However, none of the models were able to reproduce the crustal deformations derived from the SAR data analysis. Then, we tried to construct a source model that explains the observed crustal deformations well. We considered some geophysical data to constrain the source geometry; the multichannel reflection data and observed vertical deformations using coral reef survey. Considering these lines of evidence, we introduced two possible source geometries; one is single-segment model that assumes only shallow-dipping (10 deg.) main thrust ruptured, and the other is two-segment model that assumes both a high angle spray fault of 30 degree dip and the main thrust fault slipped. The comparison of models based on inversion analyses suggested that the two-segment model would be preferable. This result suggests that the Solomon Islands earthquake would be the first observed earthquake on a steeply dipping splay fault that ruptured off the main converging plate boundary. If this is the case, this earthquake might provide us with an important clue for understanding the mechanisms of land formation such as landward titling of the coastal terraces.

  5. [The clinical significance of reverse redistribution of Tl-201 SPECT at rest in the 1st month after the onset of acute myocardial infarction].

    PubMed

    Umamoto, I; Sugihara, H; Harada, Y; Sawada, T; Matsumuro, A; Matsubara, K; Shiga, K; Nakagawa, T; Oonishi, K; Nakamura, T

    1991-07-01

    The pattern of Thallium-201 reverse redistribution (r-RD) at rest has been reported in some patients with acute myocardial infarction (AMI) in the acute phase. But there is no report of this pattern in the later phase. To investigate the significance of Thallium-201 reverse redistribution in the subacute phase, 37 patients with AMI underwent Thallium-201 SPECT at rest a month after the onset. The patients were classified into three groups visually and 19 of 37 patients (51%) showed the persistent defect pattern (Group PD), and the remaining 18 patients (49%) had the reverse redistribution pattern (Group r-RD). None of them had the redistribution pattern. Coronary reflow was earlier and the incidence of the scintigraphic overlap on Dual SPECT image of 99mTc-PYP/201TlCl in the acute phase was more frequent in Group r-RD than in Group PD. A decrease in thallium defect size of patients with r-RD from the acute phase to one month after the onset represented improvement more significantly than that with PD. Initial %Tl uptake of the infarcted region of Group r-RD was greater than that of Group PD. The degree of stenosis of the infarct-related coronary artery in Group r-RD was less severe than that in Group PD. And corresponding regional wall motion of Group r-RD was less impaired. The Thallium-201 washout in the infarcted region with r-RD was significantly faster than that in the normal region. It is concluded that the r-RD pattern at rest in the 1st month after the onset of AMI may be a sign of viable myocardium. PMID:1833574

  6. American Women Workers in a Full Employment Economy. A Compendium of Papers Submitted to the Subcommittee on Economic Growth and Stabilization of the Joint Economic Committee, Congress of the United States, 95th Congress, 1st Session, September 15, 1977.

    ERIC Educational Resources Information Center

    Joint Economic Committee, Washington, DC.

    This compendium of seventeen papers discusses women's overall role in a full employment economy and their problems in fulfilling that role. It begins with a comprehensive summary of the authors' views and then presents the papers in six sections: (1) overview; (2) overcoming barriers; (3) support services and adjusted conditions; (4) education and…

  7. Economic Problems of Rural America. Hearings Before the Subcommittee on Economic Growth and Stabilization of the Joint Economic Committee, Congress of the United States, 95th Congress, 1st Session (June 7 and 15, 1977).

    ERIC Educational Resources Information Center

    Joint Economic Committee, Washington, DC.

    The purpose of the two-day hearings (Senator Lloyd Bentsen of Texas presiding) was to provide a forum to examine the whole range of rural economic problems and to educate members of the House and Senate as to the seriousness and need for comprehensive rural development programs. The proceedings contain remarks and prepared statements by the…

  8. Doing Drugs and Dropping Out: A Report Prepared for the Use of the Subcommittee on Economic Growth, Trade, and Taxes of the Joint Economic Committee, Congress of the United States. 102d Congress, 1st Session.

    ERIC Educational Resources Information Center

    Joint Economic Committee, Washington, DC.

    This report assesses the societal costs of substance abuse--especially cocaine and crack addition--and dropping out of school. It is organized around three themes: (1) the impact of cocaine and crack abuse in terms of crime, public spending, and lost productivity; (2) policies that move addicts away from crack; and (3) policies that reduce the…

  9. Distal radioulnar joint injuries.

    PubMed

    Thomas, Binu P; Sreekanth, Raveendran

    2012-09-01

    Distal radioulnar joint is a trochoid joint relatively new in evolution. Along with proximal radioulnar joint, forearm bones and interosseous membrane, it allows pronosupination and load transmission across the wrist. Injuries around distal radioulnar joint are not uncommon, and are usually associated with distal radius fractures,fractures of the ulnar styloid and with the eponymous Galeazzi or Essex_Lopresti fractures. The injury can be purely involving the soft tissue especially the triangular fibrocartilage or the radioulnar ligaments. The patients usually present with ulnar sided wrist pain, features of instability, or restriction of rotation. Difficulty in carrying loads in the hand is a major constraint for these patients. Thorough clinical examination to localize point of tenderness and appropriate provocative tests help in diagnosis. Radiology and MRI are extremely useful, while arthroscopy is the gold standard for evaluation. The treatment protocols are continuously evolving and range from conservative, arthroscopic to open surgical methods. Isolated dislocation are uncommon. Basal fractures of the ulnar styloid tend to make the joint unstable and may require operative intervention. Chronic instability requires reconstruction of the stabilizing ligaments to avoid onset of arthritis. Prosthetic replacement in arthritis is gaining acceptance in the management of arthritis. PMID:23162140

  10. Dissimilar metals joint evaluation

    NASA Technical Reports Server (NTRS)

    Wakefield, M. E.; Apodaca, L. E.

    1974-01-01

    Dissimilar metals tubular joints between 2219-T851 aluminum alloy and 304L stainless steel were fabricated and tested to evaluate bonding processes. Joints were fabricated by four processes: (1) inertia (friction) weldings, where the metals are spun and forced together to create the weld; (2) explosive welding, where the metals are impacted together at high velocity; (3) co-extrusion, where the metals are extruded in contact at high temperature to promote diffusion; and (4) swaging, where residual stresses in the metals after a stretching operation maintain forced contact in mutual shear areas. Fifteen joints of each type were prepared and evaluated in a 6.35 cm (2.50 in.) O.D. size, with 0.32 cm (0.13 in.) wall thickness, and 7.6 cm (3.0 in) total length. The joints were tested to evaluate their ability to withstand pressure cycle, thermal cycle, galvanic corrosion and burst tests. Leakage tests and other non-destructive test techniques were used to evaluate the behavior of the joints, and the microstructure of the bond areas was analyzed.

  11. Stress fractures of the sesamoid bones of the first metatarsophalangeal joint in athletes.

    PubMed

    Hulkko, A; Orava, S; Pellinen, P; Puranen, J

    1985-01-01

    Over a period of 11 years 15 cases of stress fractures of the sesamoid bones of the first metatarsophalangeal (MTP) joint were treated in athletes. The mean age of the patients was 22.3 years, and there were 9 males and 6 females in the series. All patients were athletes, who began to suffer from the symptoms during training without any trauma. Eight fractures were located in the medial, six in the lateral sesamoid bone, and in one case both sesamoids were affected. The diagnosis was performed on the basis of the history, symptoms, clinical examination, and radiological, or isotope scanning findings. Ten of the patients were treated conservatively by prescribing an avoidance of excessive physical activity and better training shoes. In five cases surgical excision of the fragmented painful sesamoid bone was performed. There were no complications in the series and the athletes could start gradually training 6-8 weeks after the operation. The histology showed fibrotic non-union at the fracture site and supported the diagnosis of stress fracture. Three of the conservatively treated athletes had mild symptoms in intensive training, others had a good end result. PMID:4051695

  12. Periprosthetic joint infection.

    PubMed

    Kapadia, Bhaveen H; Berg, Richard A; Daley, Jacqueline A; Fritz, Jan; Bhave, Anil; Mont, Michael A

    2016-01-23

    Periprosthetic joint infections are a devastating complication after arthroplasty and are associated with substantial patient morbidity. More than 25% of revisions are attributed to these infections, which are expected to increase. The increased prevalence of obesity, diabetes, and other comorbidities are some of the reasons for this increase. Recognition of the challenge of surgical site infections in general, and periprosthetic joint infections particularly, has prompted implementation of enhanced prevention measures preoperatively (glycaemic control, skin decontamination, decolonisation, etc), intraoperatively (ultraclean operative environment, blood conservation, etc), and postoperatively (refined anticoagulation, improved wound dressings, etc). Additionally, indications for surgical management have been refined. In this Review, we assess risk factors, preventive measures, diagnoses, clinical features, and treatment options for prosthetic joint infection. An international consensus meeting about such infections identified the best practices and further research needs. Orthopaedics could benefit from enhanced preventive, diagnostic, and treatment methods. PMID:26135702

  13. Quick acting gimbal joint

    NASA Technical Reports Server (NTRS)

    Wood, William B. (Inventor); Krch, Gary D. (Inventor)

    1993-01-01

    The present invention relates to an adjustable linkage assembly for selectively retaining the position of one member pivotable with respect to another member. More specifically, the invention relates to a linkage assembly commonly referred to as a gimbal joint, and particularly to a quick release or quick acting gimbal joint. The assembly is relatively simple in construction, compact in size, and has superior locking strength in any selected position. The device can be quickly and easily actuated, without separate tooling, by inexperienced personnel or by computer controlled equipment. It also is designed to prevent inadvertent actuation.

  14. Prosthetic Joint Infection

    PubMed Central

    Tande, Aaron J.

    2014-01-01

    SUMMARY Prosthetic joint infection (PJI) is a tremendous burden for individual patients as well as the global health care industry. While a small minority of joint arthroplasties will become infected, appropriate recognition and management are critical to preserve or restore adequate function and prevent excess morbidity. In this review, we describe the reported risk factors for and clinical manifestations of PJI. We discuss the pathogenesis of PJI and the numerous microorganisms that can cause this devastating infection. The recently proposed consensus definitions of PJI and approaches to accurate diagnosis are reviewed in detail. An overview of the treatment and prevention of this challenging condition is provided. PMID:24696437

  15. Joint for deployable structures

    NASA Technical Reports Server (NTRS)

    Craighead, N. D., II; Preliasco, R. J.; Hult, T. D. (Inventor)

    1985-01-01

    A joint is described for connecting a pair of beams to pivot them between positions in alignment or beside one another, which is of light weight and which operates in a controlled manner. The joint includes a pair of fittings and at least one center link having opposite ends pivotally connected to opposite fittings and having axes that pass through centerplates of the fittings. A control link having opposite ends pivotally connected to the different fittings controls their relative orientations, and a toggle assemly holds the fittings in the deployed configuration wherein they are aligned. The fittings have stops that lie on one side of the centerplane opposite the toggle assembly.

  16. Ichnological analysis of the Upper Miocene in the ANH-Tumaco-1-ST-P well: assessing paleoenvironmental conditions at the Tumaco Basin, in the Colombian Pacific

    NASA Astrophysics Data System (ADS)

    Giraldo-Villegas, Carlos A.; Celis, Sergio A.; Rodríguez-Tovar, Francisco J.; Pardo-Trujillo, Andrés; Vallejo-Hincapié, Diego F.; Trejos-Tamayo, Raúl A.

    2016-11-01

    Tumaco is a frontier basin located on the SW Colombian Pacific coast. It is composed of a thick siliciclastic sequence up to reach 10,000 m-thick. In recent years, the National Hydrocarbon Agency-ANH has promoted new exploration wells in order to understand the sedimentary dynamic and its relationship with petroleum systems. One of them, the ANH-Tumaco-1-ST-P well has ∼3000 m (12,000 feet). We carried out sedimentological, geochemical, and micropaleontological detailed analyses with special attention to the ichnology on a 55 m-cored interval (from 1695.3 to 1640.4 m = 5563-5382 ft) in order to assess paleoenvironmental conditions. Beds are composed of green and gray mudrocks interbedded with lithic sandstones and fine-grained tuffs. Calcareous microfossil assemblages defined by the recovery of Uvigerina carapitana, Uvigerina laviculata, Uvigerina pigmaea, Globigerina woodi,Globigerionoides obliquus, Discoaster bellus gr., Catinaster coalitus, Reticulofenestra pseudoumbilicus and Sphenolithus abies indicated a Tortonian age, between CN6/CN7 biozones. Six sedimentary facies were identified: (1, 2) massive and laminated mudrocks, (3, 4) massive and normal-graded sandstones, (5) heterolithic beds, and in some cases (6) sandstones with soft-deformation structures. These rocks were accumulated in a shallowing platform-prodelta environment with continuous volcanic influence. Ichnotaxonomic analysis, conducted for the first time in the Colombian Pacific, allowed the identification of eighteen ichnogenera: Alcyonidiopsis, Asterosoma, Chondrites, Conichnus, Cylindrichnus, Diplocraterion, Ophiomorpha, Palaeophycus, Phycosiphon, Planolites, Rhyzocorallium, Schaubcylindrichnus, Scolicia, Siphonichnus, Taeinidum, Teichichnus, Thalassinoides, and Zoophycos. The ichnological association belongs to the archetypal Cruziana ichnofacies and its "distal" expression. By integrating lithofacies and ichnological results, two segments have been distinguished: 1) the lower one (1695

  17. Development of China Hydrogeology Exploring Techniques in 30 Years --Comparison of Handbook of Hydrogeology of 1st and 2nd Edition

    NASA Astrophysics Data System (ADS)

    Tong, Y.

    2013-12-01

    Handbook of Hydrogeology (2nd edition) is supported by one program from China Geological Survey (CGS): Research of Technical Methods of Hydrogeological Survey and Revision of Handbook of Hydrogeology. It is a reference book for those who are engaged in hydrogeological survey and research in China and covers fundamental principles, theories, survey and exploring techniques, and traditional experiences and achievements in hydrogeology. By comparing the 1st (1978) and 2nd (2012) edition of Handbook of Hydrogeology (in Chinese), this paper analyses the development of China hydrogeological survey and exploring techniques in last 30 years, especially the great change and progress in survey techniques of hydro-remote sensing and hydro-geophysical prospecting. In the first edition of Handbook of Hydrogeology, hydro-remote sensing was only mentioned as an interpretation of aerial pictures in a hydrogeological way, but had not yet formed an independent system and discipline. In the second edition, hydro-remote sensing is an important and independent chapter as one of the hydrogeological techniques. In it, various survey techniques of hydro-remote sensing and types and features of remote sensing data are classified. General systems of interpretation marks of remote sensing images are established, including marks of landform and Quaternary sediment, bedrock, structure types, water yield property, environmental elements of hydrogeology, aquifer group and so on. Systematic workflow is constructed, esp. in remote sensing images mapping and interpreting techniques. GPS and GIS are integrated into remote sensing. Remote sensing exploring instruments and interpreting softwares are also introduced and classified. Although hydro-geophysical prospecting, in the first edition of Handbook of Hydrogeology, was one independent chapter, there were only 10 exploring techniques. Equipments and instruments were simple and lagged in comparison to those in the second edition. The precision and

  18. Flux distributions in jointed ? tapes

    NASA Astrophysics Data System (ADS)

    Koblischka, M. R.; Johansen, T. H.; Bratsberg, H.; Vase, P.

    1998-06-01

    Superconducting joints between monofilamentary, Ag-sheathed 0953-2048/11/6/005/img8 tapes were investigated by means of magneto-optic imaging. Two types of joint were studied; one joint with direct contact between the tape cores, and the other one with an Ag layer between them. The local flux distributions directly reveal the obstacles hindering the current flow through the joints. The direct contact of the tape cores provides joints which can carry about 80% of the current of the original tape, whereas the joints with the Ag layer are considerably worse. This difference becomes even more drastic in applied magnetic fields.

  19. Human temporomandibular joint morphogenesis.

    PubMed

    Carini, Francesco; Scardina, Giuseppe Alessandro; Caradonna, Carola; Messina, Pietro; Valenza, Vincenzo

    2007-01-01

    Temporomandibular joint morphogenesis was studied. Ranging in age of fetuses examined was from 6 to14 weeks' gestation. Our results showed the condyle so first element that appear between 6 degrees and 8 degrees week (condylar blastema). After a week appear temporal elements. Disk appear at the same time of glenoid blastema and it reaches an advanced differentation before of the condyle and temporal element, so these don't effect machanical compression on mesenchyma where we find the disk. So we think that the disk result of genetic expression and it isn't the result of mechanical compression. The inferior joint cavity appear to 12 week. The superior joint cavity appear to 13-14 week. In conclusion, the appearance of the condyle is the first event during TMJ morphogenesis, with its initial bud, in form of a mesenchymal thickening, becoming detectable between the sixth and eight week of development, when all the large joints of the limbs are already well defined. PMID:18333411

  20. Imaging the temporomandibular joint

    SciTech Connect

    Katzberg, R.W.; Manzione, J.V.; Westesson, P.L.

    1988-01-01

    This book encompasses all imaging modalities as they apply to the Temporomandibular Joint and its disorders. The volume employs correlative line drawings to elaborate on diagnostic images. It helps teach methods of TMJ imaging and describes findings identified by different imaging modalities to both radiologists and dental clinicians.

  1. New Joint Sealants. Criteria, Design and Materials.

    ERIC Educational Resources Information Center

    Building Research Inst., Inc., Washington, DC.

    Contents include--(1) sealing concrete joints, (2) sealing glass and metal joints, (3) metal and glass joint sealants from a fabricator's viewpoint, (4) a theory of adhesion for joint sealants, (5) geometry of simple joint seals under strain, (6) joint sealant specifications from a manufacturer's viewpoint, (7) joint sealant requirements from an…

  2. Shoulder Joint For Protective Suit

    NASA Technical Reports Server (NTRS)

    Kosmo, Joseph J.; Smallcombe, Richard D.

    1994-01-01

    Shoulder joint allows full range of natural motion: wearer senses little or no resisting force or torque. Developed for space suit, joint offers advantages in protective garments for underwater work, firefighting, or cleanup of hazardous materials.

  3. Determination of Parachute Joint Factors using Seam and Joint Testing

    NASA Technical Reports Server (NTRS)

    Mollmann, Catherine

    2015-01-01

    This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

  4. Simplified Radiographic Damage Index for Affected Joints in Chronic Gouty Arthritis

    PubMed Central

    2016-01-01

    The aim of this study was to develop and validate a new radiographic damage scoring method (DAmagE index of GoUt; DAEGU) in chronic gout using plain radiography. Two independent observers scored foot x-rays from 15 patients with chronic gout according to the DAEGU method and the modified Sharp/van der Heijde (SvdH) method. The 10 metatarsophalangeal (MTP) and 2 interphalangeal (IP) joints of the first toes of both feet were scored to assess the degrees of erosion and joint space narrowing (JSN). The intraobserver and interobserver reliabilities were analyzed by calculating the intraclass correlation coefficient (ICC) and minimal detectable change (MDC). The correlation between the DAEGU and SvdH methods was analyzed by calculating the Spearman's rho correlation coefficients and Kappa coefficients. The DAEGU method was found to be highly reproducible (0.945–0.987 for the intraobserver and 0.993–0.996 for the interobserver ICC values). The erosion, JSN, and total scores exhibited strong positive correlations between the DAEGU and SvdH methods and also within each method (r = 0.860–0.969, P < 0.001 for all parameters). The DAEGU and SvdH methods were in very good agreement as determined by Kappa coefficient analysis [0.732 (0.387–1.000) for erosion and 1.000 (1.000–1.000) for JSN]. In conclusion, this study revealed that DAEGU method was a reliable and feasible tool in the assessment of radiographic damage in chronic gout. The DAEGU method may provide a more easy assessment of structural damage in chronic gout in the real clinical practice. PMID:26955246

  5. Simplified Radiographic Damage Index for Affected Joints in Chronic Gouty Arthritis.

    PubMed

    Son, Chang-Nam; Kim, Tae Eun; Park, Kyungmin; Hwang, Jun Hyun; Kim, Seong-Kyu

    2016-03-01

    The aim of this study was to develop and validate a new radiographic damage scoring method (DAmagE index of GoUt; DAEGU) in chronic gout using plain radiography. Two independent observers scored foot x-rays from 15 patients with chronic gout according to the DAEGU method and the modified Sharp/van der Heijde (SvdH) method. The 10 metatarsophalangeal (MTP) and 2 interphalangeal (IP) joints of the first toes of both feet were scored to assess the degrees of erosion and joint space narrowing (JSN). The intraobserver and interobserver reliabilities were analyzed by calculating the intraclass correlation coefficient (ICC) and minimal detectable change (MDC). The correlation between the DAEGU and SvdH methods was analyzed by calculating the Spearman's rho correlation coefficients and Kappa coefficients. The DAEGU method was found to be highly reproducible (0.945-0.987 for the intraobserver and 0.993-0.996 for the interobserver ICC values). The erosion, JSN, and total scores exhibited strong positive correlations between the DAEGU and SvdH methods and also within each method (r = 0.860-0.969, P < 0.001 for all parameters). The DAEGU and SvdH methods were in very good agreement as determined by Kappa coefficient analysis [0.732 (0.387-1.000) for erosion and 1.000 (1.000-1.000) for JSN]. In conclusion, this study revealed that DAEGU method was a reliable and feasible tool in the assessment of radiographic damage in chronic gout. The DAEGU method may provide a more easy assessment of structural damage in chronic gout in the real clinical practice. PMID:26955246

  6. Cellular Pressure-Actuated Joint

    NASA Technical Reports Server (NTRS)

    McGuire, John R.

    2003-01-01

    A modification of a pressure-actuated joint has been proposed to improve its pressure actuation in such a manner as to reduce the potential for leakage of the pressurizing fluid. The specific joint for which the modification is proposed is a field joint in a reusable solid-fuel rocket motor (RSRM), in which the pressurizing fluid is a mixture of hot combustion gases. The proposed modification could also be applicable to other pressure-actuated joints of similar configuration.

  7. Achieving joint benefits from joint implementation

    SciTech Connect

    Moomaw, W.R.

    1995-11-01

    Joint Implementation (JI) appears to have been born with Applied Energy Services Guatemala project in 1988. That project, to plant 52 million trees, protect existing forests from cutting and fire, and enhance rural development, is being implemented by CARE Guatemala to offset 120 per cent of the emissions of a small coal burning power plant that has been built in Connecticut. Since that time, several utilities and governments have initiated additional projects. Not all of these necessarily consist of tree planting in other countries, but may consist of energy efficiency or energy conservation programs designed to reduce carbon emissions by at least as much as the additional releases from a new facility. All JI projects share the characteristic of linking the release of greenhouse gases in an industrial country with an offset that reduces or absorbs a comparable amount in another country. The emitter in the industrial country is willing to pay for the reduction elsewhere because costs are less than they would be at home.

  8. Swivel Joint For Liquid Nitrogen

    NASA Technical Reports Server (NTRS)

    Milner, James F.

    1988-01-01

    Swivel joint allows liquid-nitrogen pipe to rotate through angle of 100 degree with respect to mating pipe. Functions without cracking hard foam insulation on lines. Pipe joint rotates on disks so mechanical stress not transmitted to thick insulation on pipes. Inner disks ride on fixed outer disks. Disks help to seal pressurized liquid nitrogen flowing through joint.

  9. Double slotted socket spherical joint

    DOEpatents

    Bieg, Lothar F.; Benavides, Gilbert L.

    2001-05-22

    A new class of spherical joints is disclosed. These spherical joints are capable of extremely large angular displacements (full cone angles in excess of 270.degree.), while exhibiting no singularities or dead spots in their range of motion. These joints can improve or simplify a wide range of mechanical devices.

  10. Method for reinforcing tubing joints

    NASA Technical Reports Server (NTRS)

    Kinzler, J.; Lee, W. S.

    1968-01-01

    Joint repair technique uses a longitudinally split aluminum shield over the joint ferrule and immediately adjacent tubing to reseal or reinforce leaking or weak joints in small tubing. Epoxy resin coating on inside surfaces of the two shield halves provides a tightly sealed bond between shield and tubing.

  11. Phase 1 Program Joint Report

    NASA Technical Reports Server (NTRS)

    Nield, George C. (Editor); Vorobiev, Pavel Mikhailovich (Editor)

    1999-01-01

    This report consists of inputs from each of the Phase I Program Joint Working Groups. The Working Groups were tasked to describe the organizational structure and work processes that they used during the program, joint accomplishments, lessons learned, and applications to the International Space Station Program. This report is a top-level joint reference document that contains information of interest to both countries.

  12. Joint hypermobility syndrome pain.

    PubMed

    Grahame, Rodney

    2009-12-01

    Joint hypermobility syndrome (JHS) was initially defined as the occurrence of musculoskeletal symptoms in the presence of joint laxity and hypermobility in otherwise healthy individuals. It is now perceived as a commonly overlooked, underdiagnosed, multifaceted, and multisystemic heritable disorder of connective tissue (HDCT), which shares many of the phenotypic features of other HDCTs such as Marfan syndrome and Ehlers-Danlos syndrome. Whereas the additional flexibility can confer benefits in terms of mobility and agility, adverse effects of tissue laxity and fragility can give rise to clinical consequences that resonate far beyond the confines of the musculoskeletal system. There is hardly a clinical specialty to be found that is not touched in one way or another by JHS. Over the past decade, it has become evident that of all the complications that may arise in JHS, chronic pain is arguably the most menacing and difficult to treat. PMID:19889283

  13. Analysis of minor fractures associated with joints and faulted joints

    NASA Astrophysics Data System (ADS)

    Cruikshank, Kenneth M.; Zhao, Guozhu; Johnson, Arvid M.

    In this paper, we use fracture mechanics to interpret conditions responsible for secondary cracks that adorn joints and faulted joints in the Entrada Sandstone in Arches National Park, U.S.A. Because the joints in most places accommodated shearing offsets of a few mm to perhaps 1 dm, and thus became faulted joints, some of the minor cracks are due to faulting. However, in a few places where the shearing was zero, one can examine minor cracks due solely to interaction of joint segments at the time they formed. We recognize several types of minor cracks associated with subsequent faulting of the joints. One is the kink, a crack that occurs at the termination of a straight joint and whose trend is abruptly different from that of the joint. Kinks are common and should be studied because they contain a great deal of information about conditions during fracturing. The sense of kinking indicates the sense of shear during faulting: a kink that turns clockwise with respect to the direction of the main joint is a result of right-lateral shear, and a kink that turns counterclockwise is a result of left-lateral shear. Furthermore, the kink angle is related to the ratio of the shear stress responsible for the kinking to the normal stress responsible for the opening of the joint. The amount of opening of a joint at the time it faulted or even at the time the joint itself formed can be estimated by measuring the kink angle and the amount of strike-slip at some point along the faulted joint. Other fractures that form near terminations of pre-existing joints in response to shearing along the joint are horsetail fractures. Similar short fractures can occur anywhere along the length of the joints. The primary value in recognizing these fractures is that they indicate the sense of faulting accommodated by the host fracture and the direction of maximum tension. Even where there has been insignificant regional shearing in the Garden Area, the joints can have ornate terminations. Perhaps

  14. Optimized bolted joint

    NASA Technical Reports Server (NTRS)

    Hart-Smith, L. J.; Bunin, B. L.; Watts, D. J. (Inventor)

    1986-01-01

    A method is disclosed for joining segments of the skin of an aircraft. The ends of the skin are positioned in close proximity or abutt each other. The skin is of constant thickness throughout the joint and is sandwiched between splice plates, which taper in thickness from the last to the first bolt rows in order to reduce the stiffness of the splice plate and thereby reduce the load transfer at the location where bypass loads are the highest.

  15. Prosthetic elbow joint

    NASA Technical Reports Server (NTRS)

    Weddendorf, Bruce C. (Inventor)

    1994-01-01

    An artificial, manually positionable elbow joint for use in an upper extremity, above-elbow, prosthetic is described. The prosthesis provides a locking feature that is easily controlled by the wearer. The instant elbow joint is very strong and durable enough to withstand the repeated heavy loadings encountered by a wearer who works in an industrial, construction, farming, or similar environment. The elbow joint of the present invention comprises a turntable, a frame, a forearm, and a locking assembly. The frame generally includes a housing for the locking assembly and two protruding ears. The forearm includes an elongated beam having a cup-shaped cylindrical member at one end and a locking wheel having a plurality of holes along a circular arc on its other end with a central bore for pivotal attachment to the protruding ears of the frame. The locking assembly includes a collar having a central opening with a plurality of internal grooves, a plurality of internal cam members each having a chamfered surface at one end and a V-shaped slot at its other end; an elongated locking pin having a crown wheel with cam surfaces and locking lugs secured thereto; two coiled compression springs; and a flexible filament attached to one end of the elongated locking pin and extending from the locking assembly for extending and retracting the locking pin into the holes in the locking wheel to permit selective adjustment of the forearm relative to the frame. In use, the turntable is affixed to the upper arm part of the prosthetic in the conventional manner, and the cup-shaped cylindrical member on one end of the forearm is affixed to the forearm piece of the prosthetic in the conventional manner. The elbow joint is easily adjusted and locked between maximum flex and extended positions.

  16. Temporomandibular joint dislocation.

    PubMed

    Sharma, Naresh Kumar; Singh, Akhilesh Kumar; Pandey, Arun; Verma, Vishal; Singh, Shreya

    2015-01-01

    Temporomandibular joint (TMJ) dislocation is an uncommon but debilitating condition of the facial skeleton. The condition may be acute or chronic. Acute TMJ dislocation is common in clinical practice and can be managed easily with manual reduction. Chronic recurrent TMJ dislocation is a challenging situation to manage. In this article, we discuss the comprehensive review of the different treatment modalities in managing TMJ dislocation. PMID:26668447

  17. Temporomandibular joint dislocation

    PubMed Central

    Sharma, Naresh Kumar; Singh, Akhilesh Kumar; Pandey, Arun; Verma, Vishal; Singh, Shreya

    2015-01-01

    Temporomandibular joint (TMJ) dislocation is an uncommon but debilitating condition of the facial skeleton. The condition may be acute or chronic. Acute TMJ dislocation is common in clinical practice and can be managed easily with manual reduction. Chronic recurrent TMJ dislocation is a challenging situation to manage. In this article, we discuss the comprehensive review of the different treatment modalities in managing TMJ dislocation. PMID:26668447

  18. The neuropathic joint.

    PubMed

    Sequeira, W

    1994-01-01

    Neuropathic arthritis is a destructive arthropathy frequently associated with loss of proprioception. A third of patients, however, may have no demonstrable neurological deficit. Patients with diabetes, syphilis, syringomyelia and other neuropathies are particularly prone to developing this joint disease. The diagnosis of Charcot's joints should be considered in anyone who develops what appears to be a severe osteoarthritis or a transverse fracture of the tibia or fibula after minor trauma. Scoliosis with particularly destructive changes on radiography should prompt a search for syringomyelia or syphilis. The most common radiographic abnormalities are those of distension in 3D (Dislocation, Destruction and Degeneration). An atrophic form with resorption of the proximal humerus, most frequently described in syringomyelia, has been observed in diabetes. Loss of the distal end of the clavicle has not been described before in the neuropathies. These changes coupled with speckled calcification or shards of bone in the periarticular soft tissue confirm the diagnosis. Infection and CPPD crystal disease can be difficult to exclude. The joint fluid may be inflammatory and infection may be a complication. Treatment includes anti-inflammatories and splinting. Indications for surgery are limited. PMID:8070170

  19. Formation of tough composite joints

    SciTech Connect

    Brun, M.K.

    1997-05-01

    Joints which exhibit tough fracture behavior were formed in a composite with a Si/SiC matrix reinforced with Textron SCS-6 fibers with either boron nitride or silicon nitride fiber coatings. In composites with BN coatings fibers were aligned uniaxially, while composites with Si{sub 3}N{sub 4}-coated fibers had a 0/90{degree} architecture. Lapped joints (joints with overlapping fingers) were necessary to obtain tough behavior. Geometrical requirements necessary to avoid brittle joint failure have been proposed. Joints with a simple overlap geometry (only a few fingers) would have to be very long in order to prevent brittle failure. Typical failure in these joints is caused by a crack propagating along the interfaces between the joint fingers. Joints of the same overall length, but with geometry changed to be symmetric about the joint centerline and with an extra shear surface exhibited tough fractures accompanied with extensive fiber pullout. The initial matrix cracking of these joints was relatively low because cracks propagated easily through the ends of the fingers. Joints with an optimized stepped sawtooth geometry produced composite-like failures with the stress/strain curves containing an elastic region followed by a region of rising stress with an increase of strain. Increasing the fiber/matrix interfacial strength from 9 to 25 MPa, by changing the fiber coating, increased matrix cracking and ultimate strength of the composite significantly. The best joints had matrix cracking stress and ultimate strength of 138 and 240 MPa, respectively. Joint failure was preceded by multiple matrix cracking in the entire composite. The high strength of the joints will permit building of structures containing joints with only a minor reduction of design stresses.

  20. Improved high-temperature gimbal joint

    NASA Technical Reports Server (NTRS)

    Winemiller, J. R.; Yee, S. T.; Neal, B. H.

    1972-01-01

    Development and characteristics of bellows gimbal joint for reduction of thermal stress effects are discussed. Reactions of designed joint to changes in temperature are described. Illustrations of conventional gimbal joint and improved gimbal joint are provided.

  1. Formation of tough composite joints

    SciTech Connect

    Brun, M.K.

    1998-12-01

    Joints that exhibited tough fracture behavior were formed in a Si/SiC matrix reinforced with Textron SCS-6 fibers with either boron nitride or silicon nitride fiber coatings. Lapped joints (joints with overlapping fingers) were necessary to obtain tough behavior. Geometrical requirements necessary to avoid brittle joint failure were proposed. Joints with a simple overlap geometry (only a few fingers) had to be very long in order to prevent brittle failure. Joints with an optimized stepped sawtooth geometry produced composite-like failures with the stress/strain curves containing an elastic region followed by a region of rising stress with an increase of strain. Increasing the fiber/matrix interfacial strength, by changing the fiber coating, significantly increased matrix cracking and ultimate strength of the joints. The best joints had matrix cracking stress and ultimate strength of 138 and 240 MPa, respectively. Joint failure was preceded by multiple matrix cracking in the entire composite. The high strength of the joints should permit building of structures containing joints with only a minor reduction of design stresses.

  2. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  3. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Rail joints. 213.351 Section 213.351... Rail joints. (a) Each rail joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for the rail on which it is applied. (b) If a joint bar is cracked,...

  4. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Rail joints. 213.351 Section 213.351... Rail joints. (a) Each rail joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for the rail on which it is applied. (b) If a joint bar is cracked,...

  5. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 17 Commodity and Securities Exchanges 3 2012-04-01 2012-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  6. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Rail joints. 213.351 Section 213.351... Rail joints. (a) Each rail joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for the rail on which it is applied. (b) If a joint bar is cracked,...

  7. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 3 2013-04-01 2013-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  8. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 17 Commodity and Securities Exchanges 4 2014-04-01 2014-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  9. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Rail joints. 213.351 Section 213.351... Rail joints. (a) Each rail joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for the rail on which it is applied. (b) If a joint bar is cracked,...

  10. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 17 Commodity and Securities Exchanges 3 2011-04-01 2011-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  11. Small joint arthroscopy in foot and ankle.

    PubMed

    Lui, Tun Hing; Yuen, Chi Pan

    2015-03-01

    The clinical application of small joint arthroscopies (metatarsophalangeal joint, Lisfranc joint, Chopart joint, and interphlangeal joint) in the foot has seen significant advancements in the past decades. This article reviews the clinical indications, technical details, outcomes, and potential complications of small joint arthroscopies of the foot. PMID:25726488

  12. Joint bone radiobiology workshop

    SciTech Connect

    Tomich, P.A.

    1991-01-01

    The Joint Bone Radiobiology Workshop was held on July 12--13, 1991 in Toronto, Canada. This document contains the papers presented at the meeting. The five sections were: Dose-effects, Endogenous Cofactors, Tumorigenesis, New Methods and Medical Implications. The papers covered risk assessment, tissue distribution of radionuclides, lifetime studies, biological half-lifes, the influence of age at time of exposure, tumor induction by different radionuclides, microscopic localization of radionuclides, and nuclear medicine issues including tissue distribution in the skeleton and bone marrow transplantation. (MHB)

  13. Joint hypermobility syndrome.

    PubMed

    Fikree, Asma; Aziz, Qasim; Grahame, Rodney

    2013-05-01

    Although perceived as a rare condition, joint hypermobility syndrome is common. Its prevalence in rheumatology clinics is extremely high. Early estimates suggest that it may be the most common of all rheumatologic conditions. The problem lies in the general lack of awareness of the syndrome, its means of recognition, and the resultant failure to diagnose it correctly when present. It is a worldwide problem. This article provides an overview of hypermobility and hypermobility syndrome, stressing its multisystemic nature and the negative impact that it may have on quality of life, with particular reference to gastrointestinal involvement. PMID:23597972

  14. Tarsometatarsal/Lisfranc joint.

    PubMed

    DiDomenico, Lawrence A; Cross, Davi

    2012-04-01

    Accurate early diagnosis with adequate reduction and maintenance of anatomic alignment of the dislocation or fracture within the Lisfranc joint complex have been found to be the key to successful outcomes regarding this injury. Because of the anatomic variations, the thin soft tissue envelop, and the abundance of ligamentous and capsular structures in the region, repair of these injuries can be a challenge. The classification systems used to describe these injuries aid in describing the mechanism of injury or displacement type present, which may aid in determining what treatment modality can provide the best outcome. PMID:22424486

  15. Posttraumatic temporomandibular joint disorders.

    PubMed

    Giannakopoulos, Helen E; Quinn, Peter D; Granquist, Eric; Chou, Joli C

    2009-05-01

    The temporomandibular joint (TMJ) has many essential functions. None of its components are exempt from injury. Facial asymmetry, malocclusion, disturbances in growth, osteoarthritis, and ankylosis can manifest as complications from trauma to the TMJ. The goals of initial treatment include achievement of pretraumatic function, restoration of facial symmetry, and resolution of pain. These same objectives hold true for late repairs and reconstruction of the TMJ apparatus. Treatment is demanding, and with opposing approaches. The following article explores various treatment options for problems presenting as a result of a history of trauma to the TMJ. PMID:22110802

  16. Optical rotary joint

    NASA Astrophysics Data System (ADS)

    May, R. G., Jr.

    1982-06-01

    The primary objective of this contract is the design, fabrication, and testing of an optical rotary joint which permits transmission of signals through optical fibers across the interface of two environments rotating relative to each other. Outstanding optical performance is achieved through the use of gradient index lenses to couple radiation across the separation between two fibers. The salient features of this device are bidirectional operation at two wavelengths (850 nm and 1300 nm), low insertion loss, low rotationally induced variation of attenuation, a seven-circuit electrical slip-ring assembly, and rugged construction. The device is designed to facilitate the application of future designs to pressurized, subsea environments.

  17. Bladder operated robotic joint

    NASA Technical Reports Server (NTRS)

    Robertson, Glen A. (Inventor)

    1993-01-01

    This invention is a robotic joint which is operated by inflatable bladders and which can be used in applications where it is desired to move or hold an object. A support block supports an elongated plate to which is pivotally attached a finger. A tension strip passes over a lever attached to the finger and is attached at its ends to the support block on opposite sides of the plate. Bladders positioned between the plate and the tension strip on opposite sides of the plate can be inflated by pumps to pivot the finger, with one of the bladders being inflated while the other is being deflated.

  18. Joint-sparing Corrections in Malunited Lisfranc Joint Injuries.

    PubMed

    Nery, Caio; Raduan, Fernando; Baumfeld, Daniel

    2016-03-01

    Lisfranc fracture-dislocations are very serious and potentially disabling injuries. Unfortunately, they are often misdiagnosed. Multiplanar midfoot deformities that result from these fracture-dislocations are precursors of joint degeneration and significant functional disabilities. Anatomic reduction with different types of internal fixation is an efficient method to reconstruct midfoot alignment and stability. Joint-preserving reconstruction techniques emerge as a viable alternative to corrective fusion as they achieve stable joint realignment with preserved motion. PMID:26915786

  19. On representations for joint moments using a joint coordinate system.

    PubMed

    O'Reilly, Oliver M; Sena, Mark P; Feeley, Brian T; Lotz, Jeffrey C

    2013-11-01

    In studies of the biomechanics of joints, the representation of moments using the joint coordinate system has been discussed by several authors. The primary purpose of this technical brief is to emphasize that there are two distinct, albeit related, representations for moment vectors using the joint coordinate system. These distinct representations are illuminated by exploring connections between the Euler and dual Euler bases, the "nonorthogonal projections" presented in a recent paper by Desroches et al. (2010, "Expression of Joint Moment in the Joint Coordinate System," ASME J. Biomech. Eng., 132(11), p. 11450) and seminal works by Grood and Suntay (Grood and Suntay, 1983, "A Joint Coordinate System for the Clinical Description of Three-Dimensional Motions: Application to the Knee," ASME J. Biomech. Eng., 105(2), pp. 136-144) and Fujie et al. (1996, "Forces and Moment in Six-DOF at the Human Knee Joint: Mathematical Description for Control," Journal of Biomechanics, 29(12), pp. 1577-1585) on the knee joint. It is also shown how the representation using the dual Euler basis leads to straightforward definition of joint stiffnesses. PMID:24008987

  20. Joint collaborative technology experiment

    NASA Astrophysics Data System (ADS)

    Wills, Michael; Ciccimaro, Donny; Yee, See; Denewiler, Thomas; Stroumtsos, Nicholas; Messamore, John; Brown, Rodney; Skibba, Brian; Clapp, Daniel; Wit, Jeff; Shirts, Randy J.; Dion, Gary N.; Anselmo, Gary S.

    2009-05-01

    Use of unmanned systems is rapidly growing within the military and civilian sectors in a variety of roles including reconnaissance, surveillance, explosive ordinance disposal (EOD), and force-protection and perimeter security. As utilization of these systems grows at an ever increasing rate, the need for unmanned systems teaming and inter-system collaboration becomes apparent. Collaboration provides a means of enhancing individual system capabilities through relevant data exchange that contributes to cooperative behaviors between systems and enables new capabilities not possible if the systems operate independently. A collaborative networked approach to development holds the promise of adding mission capability while simultaneously reducing the workload of system operators. The Joint Collaborative Technology Experiment (JCTE) joins individual technology development efforts within the Air Force, Navy, and Army to demonstrate the potential benefits of interoperable multiple system collaboration in a force-protection application. JCTE participants are the Air Force Research Laboratory, Materials and Manufacturing Directorate, Airbase Technologies Division, Force Protection Branch (AFRL/RXQF); the Army Aviation and Missile Research, Development, and Engineering Center Software Engineering Directorate (AMRDEC SED); and the Space and Naval Warfare Systems Center - Pacific (SSC Pacific) Unmanned Systems Branch operating with funding provided by the Joint Ground Robotics Enterprise (JGRE). This paper will describe the efforts to date in system development by the three partner organizations, development of collaborative behaviors and experimentation in the force-protection application, results and lessons learned at a technical demonstration, simulation results, and a path forward for future work.

  1. Jointly Sponsored Research Program

    SciTech Connect

    Everett A. Sondreal; John G. Hendrikson; Thomas A. Erickson

    2009-03-31

    U.S. Department of Energy (DOE) Cooperative Agreement DE-FC26-98FT40321 funded through the Office of Fossil Energy and administered at the National Energy Technology Laboratory (NETL) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy & Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying highly efficient, nonpolluting energy systems that meet the nation's requirements for clean fuels, chemicals, and electricity in the 21st century. The EERC in partnership with its nonfederal partners jointly performed 131 JSRP projects for which the total DOE cost share was $22,716,634 (38%) and the nonfederal share was $36,776,573 (62%). Summaries of these projects are presented in this report for six program areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, and (6) advanced materials. The work performed under this agreement addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration; near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources.

  2. [The flagship of the national naval medical science (on the 80th anniversary of establishment of the 1st Central Research Institute of the Defense Ministry of Russian Federation)].

    PubMed

    Chumakov, Vl V; Arkhipov, A V; Borodavko, V K; Vasil'kov, A M; Groshilin, S M; Ivanov, A O; Smurov, A V

    2013-02-01

    The article is devoted to the 80th anniversary of the formation of the naval medical science subunit, which is the part of the 1st Central Research Institute of the Defense Ministry of Russian Federation. In the 30th years of XX century, a group of naval doctors formulated the main directions of preventive naval medicine. For eight decades, several generations of medical scientists have developed and ensured implementation of regulatory requirements for habitability and ergonomics of Navy ships. At the present stage, this work focuses on promising directions of the development of the domestic military shipbuilding and the use of advanced and innovative biomedical technologies. PMID:23808207

  3. The Hospital Microbiome Project: Meeting Report for the 1st Hospital Microbiome Project Workshop on sampling design and building science measurements, Chicago, USA, June 7th-8th 2012

    PubMed Central

    Smith, Daniel; Alverdy, John; An, Gary; Coleman, Maureen; Garcia-Houchins, Sylvia; Green, Jessica; Keegan, Kevin; Kelley, Scott T.; Kirkup, Benjamin C.; Kociolek, Larry; Levin, Hal; Landon, Emily; Olsiewski, Paula; Knight, Rob; Siegel, Jeffrey; Weber, Stephen; Gilbert, Jack

    2013-01-01

    This report details the outcome of the 1st Hospital Microbiome Project workshop held on June 7th-8th, 2012 at the University of Chicago, USA. The workshop was arranged to determine the most appropriate sampling strategy and approach to building science measurement to characterize the development of a microbial community within a new hospital pavilion being built at the University of Chicago Medical Center. The workshop made several recommendations and led to the development of a full proposal to the Alfred P. Sloan Foundation as well as to the creation of the Hospital Microbiome Consortium. PMID:23961316

  4. [Fractures of the elbow joint].

    PubMed

    Nowak, T E; Dietz, S O; Burkhart, K J; Müller, L P; Rommens, P M

    2012-02-01

    Fractures around the elbow joint comprise fractures of the distal humerus, the radial head, the olecranon and the coronoid process. Combined lesions are particularly demanding for the surgeon. Accurate knowledge of the anatomy and of the biomechanics is an essential requirement for a specific diagnosis and therapy. A stable and painless movable elbow joint is essential for most of the activities of daily living. Risk factors for the development of posttraumatic elbow joint arthrosis are non-anatomically reconstructed joint surfaces, axial malalignment of the joint axis and untreated concomitant injuries. Modern angular stable and anatomically preshaped implants facilitate a biomechanically adequate osteosynthesis and avoid or decrease functional impairment. In consideration of an increasing number of osteoporotic elbow joint fractures, endoprosthetic replacement has gained significance. PMID:22271056

  5. Strength of Welded Aircraft Joints

    NASA Technical Reports Server (NTRS)

    Brueggeman, W C

    1937-01-01

    This investigation is a continuation of work started in 1928 and described in NACA-TR-348 which shows that the insertion of gusset plates was the most satisfactory way of strengthening a joint. Additional tests of the present series show that joints of this type could be improved by cutting out the portion of the plate between the intersecting tubes. T and lattice joints in thin-walled tubing 1 1/2 by 0.020 inch have somewhat lower strengths than joints in tubing of greater wall thickness because of failure by local buckling. In welding the thin-walled tubing, the recently developed "carburizing flux" process was found to be the only method capable of producing joints free from cracks. The "magnetic powder" inspection was used to detect cracks in the joints and flaws in the tubing.

  6. Metal to ceramic sealed joint

    DOEpatents

    Lasecki, J.V.; Novak, R.F.; McBride, J.R.

    1991-08-27

    A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system. 11 figures.

  7. Metal to ceramic sealed joint

    DOEpatents

    Lasecki, John V.; Novak, Robert F.; McBride, James R.

    1991-01-01

    A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system.

  8. Nonlinear random motion analysis of coupled heave-pitch motions of a spar platform considering 1st-order and 2nd-order wave loads

    NASA Astrophysics Data System (ADS)

    Liu, Shuxiao; Tang, Yougang; Li, Wei

    2016-06-01

    In this study, we consider first- and second-order random wave loads and the effects of time-varying displacement volume and transient wave elevation to establish motion equations of the Spar platform's coupled heave-pitch. We generated random wave loads based on frequency-domain wave load transfer functions and the Joint North Sea Wave Project (JONSWAP) wave spectrum, designed program codes to solve the motion equations, and then simulated the coupled heave-pitch motion responses of the platform in the time domain. We then calculated and compared the motion responses in different sea conditions and separately investigated the effects of second-order random wave loads and transient wave elevation. The results show that the coupled heave-pitch motion responses of the platform are primarily dominated by wave height and the characteristic wave period, the latter of which has a greater impact. Second-order mean wave loads mainly affect the average heave value. The platform's pitch increases after the second-order low frequency wave loads are taken into account. The platform's heave is underestimated if the transient wave elevation term in the motion equations is neglected.

  9. Ball-joint grounding ring

    NASA Technical Reports Server (NTRS)

    Aperlo, P. J. A.; Buck, P. A.; Weldon, V. A.

    1981-01-01

    In ball and socket joint where electrical insulator such as polytetrafluoroethylene is used as line to minimize friction, good electrical contact across joint may be needed for lightning protection or to prevent static-charge build-up. Electrical contact is maintained by ring of spring-loaded fingers mounted in socket. It may be useful in industry for cranes, trailers, and other applications requiring ball and socket joint.

  10. Passive Ball Capture Joint

    NASA Technical Reports Server (NTRS)

    Cloyd, Richard A. (Inventor); Bryan, Thomas C. (Inventor)

    2003-01-01

    A passive ball capture joint has a sleeve with a plurality of bores distributed about a circumference thereof and formed therethrough at an acute angle relative to the sleeve's longitudinal axis. A spring-loaded retainer is slidingly fitted in each bore and is biased such that, if allowed, will extend at least partially into the sleeve to retain a ball therein. A ring, rotatably mounted about the bores, has an interior wall defining a plurality of shaped races that bear against the spring-loaded retainers. A mechanized rotational force producer is coupled to the ring. The ring can be rotated from a first position (that presses the retainers into the sleeve to lock the ball in place) to a second position (that allows the retainers to springback out of the sleeve to release the ball).

  11. CRUCIFORM CONTROL ROD JOINT

    DOEpatents

    Thorp, A.G. II

    1962-08-01

    An invention is described which relates to nuclear reactor control rod components and more particularly to a joint between cruciform control rod members and cruciform control rod follower members. In one embodiment this invention provides interfitting crossed arms at adjacent ends of a control rod and its follower in abutting relation. This holds the members against relative opposite longitudinal movement while a compression member keys the arms against relative opposite rotation around a common axis. Means are also provided for centering the control rod and its follower on a common axis and for selectively releasing the control rod from its follower for the insertion of a replacement of the control rod and reuse of the follower. (AEC)

  12. Corynebacterium Prosthetic Joint Infection

    PubMed Central

    Cazanave, Charles; Greenwood-Quaintance, Kerryl E.; Hanssen, Arlen D.

    2012-01-01

    Identification of Corynebacterium species may be challenging. Corynebacterium species are occasional causes of prosthetic joint infection (PJI), but few data are available on the subject. Based on the literature, C. amycolatum, C. aurimucosum, C. jeikeium, and C. striatum are the most common Corynebacterium species that cause PJI. We designed a rapid PCR assay to detect the most common human Corynebacterium species, with a specific focus on PJI. A polyphosphate kinase gene identified using whole-genome sequence was targeted. The assay differentiates the antibiotic-resistant species C. jeikeium and C. urealyticum from other species in a single assay. The assay was applied to a collection of human Corynebacterium isolates from multiple clinical sources, and clinically relevant species were detected. The assay was then tested on Corynebacterium isolates specifically associated with PJI; all were detected. We also describe the first case of C. simulans PJI. PMID:22337986

  13. Inaudible temporomandibular joint vibrations.

    PubMed

    Widmalm, Sven E; Bae, Hanna E K; Djurdjanovic, Dragan; McKay, Duane C

    2006-07-01

    The aim was to test the hypothesis that inaudible vibrations with significant amounts of energy increasing during jaw movements can be recorded in the temporomandibular joint (TMJ) area. Twenty one subjects, who could perform wide opening movements without feeling discomfort, 12 with and 9 without TMJ sounds audible at conventional auscultation with a stethoscope, were included. Recordings were made during opening-closing, 2/s without tooth contact, and during mandibular rest, using accelerometers with a flat frequency response between the filter cutoff frequencies 0.1 Hz and 1000 Hz. The signals were digitized using a 24 bits card and sampled with the rate 96000 Hz. Power spectral analyses, and independent and paired samples t-tests were used in the analysis of the vibration power observed in frequency bands corresponding to audible and inaudible frequencies. An alpha-level of 5% was chosen for accepting a difference as being significant. In the group with audible sounds, about 47% of the total vibration energy was in the inaudible area below 20 Hz during opening-closing and about 76% during mandibular rest. In the group without audible sounds, the corresponding proportions were significantly different, 85% vs. 69%. The energy content of the vibrations, both those below and those above 20 Hz, increased significantly during jaw movement in both groups. Furthermore, percentage of signal energy above 20 Hz showed a noticeable increase in the group of subjects with audible sounds. This can physically be explained by decreased damping properties of damaged tissues surrounding the TMJ. Vibrations in the TMJ area can be observed with significant portions in the inaudible area below 20 Hz both during mandibular rest and during jaw movements whether or not the subjects have audible joint sounds. Further studies are needed to identify sources and evaluate possible diagnostic value. PMID:16933462

  14. Bone and Joint Infections in Older Adults.

    PubMed

    Mears, Simon C; Edwards, Paul K

    2016-08-01

    Bone and joint infections in the elderly patient include septic native joints, osteomyelitis, and prosthetic joint infection. Infections are difficult to treat and require a team approach. Surgical debridement and intravenous antibiotics are the keys to treatment. Prosthetic joint infections often need a two-stage approach to treatment. First the infected joint is removed and the infection treated, then a second prosthetic joint is placed. Prosthetic joint infection is becoming the most common complication after joint replacement surgery. Outcomes of treatment of bone and joint infections are related to the severity of the infection and condition of the host. Because the elderly are often frail, treatment is challenging. PMID:27394023

  15. Robotic joint experiments under ultravacuum

    NASA Technical Reports Server (NTRS)

    Borrien, A.; Petitjean, L.

    1988-01-01

    First, various aspects of a robotic joint development program, including gearbox technology, electromechanical components, lubrication, and test results, are discussed. Secondly, a test prototype of the joint allowing simulation of robotic arm dynamic effects is presented. This prototype is tested under vacuum with different types of motors and sensors to characterize the functional parameters: angular position error, mechanical backlash, gearbox efficiency, and lifetime.

  16. Exercise and the Knee Joint.

    ERIC Educational Resources Information Center

    Clarke, H. Harrison, Ed.

    1976-01-01

    This report by the President's Council on Physical Fitness and Sports examines the effects of various forms of physical exercise on the knee joint which, because of its vulnerability, is especially subject to injury. Discussion centers around the physical characteristics of the joint, commonly used measurements for determining knee stability,…

  17. 20 CFR 410.645 - Joint hearings.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Joint hearings. 410.645 Section 410.645..., Finality of Decisions, and Representation of Parties § 410.645 Joint hearings. When two or more hearings... joint hearing, a joint hearing may not be held. Where joint hearings are held, a single record of...

  18. 14 CFR 27.935 - Shafting joints.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Shafting joints. 27.935 Section 27.935... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation must...

  19. 37 CFR 1.45 - Joint inventors.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2012-07-01 2012-07-01 false Joint inventors. 1.45 Section... Patent § 1.45 Joint inventors. (a) Joint inventors must apply for a patent jointly and each must make the... joint application under 35 U.S.C. 116. If multiple inventors are named in a provisional...

  20. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  1. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  2. 14 CFR 29.935 - Shafting joints.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Shafting joints. 29.935 Section 29.935... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation...

  3. 14 CFR 29.935 - Shafting joints.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Shafting joints. 29.935 Section 29.935... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation...

  4. 14 CFR 29.935 - Shafting joints.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Shafting joints. 29.935 Section 29.935... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation...

  5. 14 CFR 27.935 - Shafting joints.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Shafting joints. 27.935 Section 27.935... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation must...

  6. 14 CFR 27.935 - Shafting joints.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Shafting joints. 27.935 Section 27.935... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation must...

  7. 14 CFR 27.935 - Shafting joints.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Shafting joints. 27.935 Section 27.935... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation must...

  8. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  9. 14 CFR 29.935 - Shafting joints.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Shafting joints. 29.935 Section 29.935... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation...

  10. 14 CFR 29.935 - Shafting joints.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Shafting joints. 29.935 Section 29.935... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation...

  11. 20 CFR 410.645 - Joint hearings.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Joint hearings. 410.645 Section 410.645..., Finality of Decisions, and Representation of Parties § 410.645 Joint hearings. When two or more hearings... joint hearing, a joint hearing may not be held. Where joint hearings are held, a single record of...

  12. 37 CFR 1.45 - Joint inventors.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Joint inventors. 1.45 Section... Patent § 1.45 Joint inventors. (a) Joint inventors must apply for a patent jointly and each must make the... joint application under 35 U.S.C. 116. If multiple inventors are named in a provisional...

  13. 14 CFR 27.935 - Shafting joints.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Shafting joints. 27.935 Section 27.935... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation must...

  14. 37 CFR 1.45 - Joint inventors.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Joint inventors. 1.45 Section... Patent § 1.45 Joint inventors. (a) Joint inventors must apply for a patent jointly and each must make the... joint application under 35 U.S.C. 116. If multiple inventors are named in a provisional...

  15. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  16. Arthritis at the shoulder joint.

    PubMed

    Sankaye, Prashant; Ostlere, Simon

    2015-07-01

    The shoulder is a complex joint with numerous structures contributing to mobility and stability. Shoulder pain is a common clinical complaint that may be due to a wide spectrum of disorders including rotator cuff disease, instability, and arthropathy. Primary osteoarthritis of the shoulder joint is uncommon because it is a non-weight-bearing joint. Significant osteoarthritis of the glenohumeral joint is unusual in the absence of trauma, and the detection of advanced degenerative changes in patients without a known history of trauma should alert the clinician to search for other disorders. This article reviews the pathogenesis, clinical manifestations, and key imaging findings of the common categories of the arthritis affecting the glenohumeral joint. PMID:26021591

  17. Method of forming a joint

    DOEpatents

    Butt, Darryl Paul; Cutler, Raymond Ashton; Rynders, Steven Walton; Carolan, Michael Francis

    2006-08-22

    A method of joining at least two sintered bodies to form a composite structure, including providing a first multicomponent metallic oxide having a perovskitic or fluorite crystal structure; providing a second sintered body including a second multicomponent metallic oxide having a crystal structure of the same type as the first; and providing at an interface a joint material containing at least one metal oxide containing at least one metal identically contained in at least one of the first and second multicomponent metallic oxides. The joint material is free of cations of Si, Ge, Sn, Pb, P and Te and has a melting point below the sintering temperatures of both sintered bodies. The joint material is heated to a temperature above the melting point of the metal oxide(s) and below the sintering temperatures of the sintered bodies to form the joint. Structures containing such joints are also disclosed.

  18. Space Station alpha joint bearing

    NASA Technical Reports Server (NTRS)

    Everman, Michael R.; Jones, P. Alan; Spencer, Porter A.

    1987-01-01

    Perhaps the most critical structural system aboard the Space Station is the Solar Alpha Rotary Joint which helps align the power generation system with the sun. The joint must provide structural support and controlled rotation to the outboard transverse booms as well as power and data transfer across the joint. The Solar Alpha Rotary Joint is composed of two transition sections and an integral, large diameter bearing. Alpha joint bearing design presents a particularly interesting problem because of its large size and need for high reliability, stiffness, and on orbit maintability. The discrete roller bearing developed is a novel refinement to cam follower technology. It offers thermal compensation and ease of on-orbit maintenance that are not found in conventional rolling element bearings. How the bearing design evolved is summarized. Driving requirements are reviewed, alternative concepts assessed, and the selected design is described.

  19. Shock transmissibility of threaded joints

    SciTech Connect

    Hansen, N.R.; Bateman, V.I.; Brown, F.A.

    1996-12-31

    Sandia National Laboratories (SNL) designs mechanical systems with threaded joints that must survive high shock environments. These mechanical systems include penetrators that must survive soil and rock penetration; drilling pipe strings that must survive rock-cutting, shock environments; and laydown weapons that must survive delivery impact shock. This paper summarizes an analytical study and an experimental evaluation of compressive, one-dimensional, shock transmission through a threaded joint in a split Hopkinson bar configuration. Thread geometries were scaled to simulate large diameter threaded joints with loadings parallel to the axis of the threads. Both strain and acceleration were evaluated with experimental measurements and analysis. Analytical results confirm the experimental conclusions that in this split Hopkinson bar configuration, the change in the one-dimensional shock wave by the threaded joint is localized to a length equal to a few diameters` length beyond the threaded joint.

  20. Joint services electronics program

    NASA Astrophysics Data System (ADS)

    Peters, Leon, Jr.

    1992-11-01

    The report represents the fifteenth annual summary of The Ohio State University Joint Services Electronics Program (JSEP). The transfer of the compact range identification technology initiated under JSEP support for time domain studies continues to make large advances. We are also assisting Rockwell (Tulsa) to update their RCS facilities. This work is on a subcontract to the ESL from the Air Force. This has lead to involvement in the study of Ultra Wide Band radar systems. The research activities devoted to the Generalized Ray and Gaussian Beams continues. Our JSEP research continues to be expanded by external funding. This program is being expanded by use of such funds which are more focussed on the requirements of the sponsors which includes both the Air Force and the Navy. Our JSEP research continues to focus on electromagnetic related topics. There are four major electromagnetics areas that were pursued in the past year. The Diffraction Studies Work Unit has initiated research on a time domain version of the Uniform Theory of Diffraction. A second topic under the Diffraction Studies Work Unit involves further extensions of the generalized resistive boundary condition and the generalized impedance boundary condition. These have been applied to scattering from a chiral slab. A third topic of interest is the diffraction from a corner. A fourth task involves the reflection/diffraction of a Gaussian beam. This represents an approach to replace the usual ray optics solution for very complex geometries where the versatile ray optics solution becomes cumbersome.

  1. Well pipe joint

    SciTech Connect

    Ortloff, D.J.; Landriault, L.S.

    1987-08-25

    For use in forming a pipe joint, a threaded tubular member adapted for connecting to another threaded member to form a threaded connection between the two members is described comprising a tubular body, a projecting helical rib on the body forming screw threads having load flanks shaped to have clearance between the flanks of the thread and the load flanks of the threads of the threaded member to which the member is adapted to be connected and a torque shoulder on the body to engage a torque shoulder on the other threaded member as the connection is being made up to limit the distance one of the members can enter the other for a given make-up torque. The threads are formed on the body so that selected threads away from the torque shoulder will have less clearance between them and the mating threads on the other member than do the threads on the member adjacent the torque shoulder and the mating threads on the other member when the torque shoulders engage so that the selected threads will engage the mating threads on the other member before the other threads adjacent the torque shoulder and the mating threads on the other member engage to cause the selected threads to be loaded initially to provide the initial force between the torque shoulders and to more uniformly load all of the threads when the connection is made-up and additional external loads are applied.

  2. Acromioclavicular joint cyst formation.

    PubMed

    Hiller, Andrew D; Miller, Joshua D; Zeller, John L

    2010-03-01

    Acromioclavicular joint (ACJ) cysts are an uncommon and unusual sequela associated with shoulder pathophysiology. The majority of literature on ACJ cysts consists of individual case reports with no definitive literature review currently available. In addition to a comprehensive literature review, four clinical cases are presented in this report. First described by Craig (1984), a total of 41 cases have been previously reported in the literature. Of these cases, five occurred with the rotator cuff musculature intact. The remaining 36 cases of ACJ cysts occurred in patients with a complete tear/avulsion of the rotator cuff. Previous attempts at compiling a complete record of all reported cases have combined several distinct conditions into a single category. This article presents two distinct etiologies for the pathogenesis of ACJ cyst formation. In the presence of an intact rotator cuff, a Type 1 cyst can form superficially and be limited to the ACJ. Following a massive or traumatic tear of the rotator cuff, mechanical instability of the humeral head can cause a deterioration of the inferior acromioclavicular capsule (cuff tear arthropathy) and an overproduction of synovial fluid. Overtime, a "geyser" of fluid can form between the glenohumeral and the ACJ, forming a Type 2 cyst. This differentiation and categorization is essential for appropriate classification and treatment. PMID:20069645

  3. Qualification of improved joint heaters

    NASA Technical Reports Server (NTRS)

    Cook, M.

    1989-01-01

    Qualification testing of the Redesigned Solid Rocket Motor improved igniter-to-case joint and field joint heaters was conducted on the fired TEM-04 static test motor and was completed on 7 Sep. 1989. The purpose of the test was to certify the installation and performance of the improved joint heaters for use on flight motors. The changes incorporated in the improved heaters improve durability and should reduce handling damage. The igniter-to-case joint and field joint primary heater circuits were subjected to five 20-hr ON cycles. The heater redundant circuits were then subjected to one 20-hr ON cycle. Voltage, current, and temperature set point values were maintained within the specified limits for both heaters during each ON cycle. When testing was complete, both heaters were removed and inspected. No discolorations or any other anomalies were found on either of the heaters. Based on the successful completion of this test, it is recommended that the improved igniter-to-case joint and field joint heaters be used on future flight motors.

  4. Common Bolted Joint Analysis Tool

    NASA Technical Reports Server (NTRS)

    Imtiaz, Kauser

    2011-01-01

    Common Bolted Joint Analysis Tool (comBAT) is an Excel/VB-based bolted joint analysis/optimization program that lays out a systematic foundation for an inexperienced or seasoned analyst to determine fastener size, material, and assembly torque for a given design. Analysts are able to perform numerous what-if scenarios within minutes to arrive at an optimal solution. The program evaluates input design parameters, performs joint assembly checks, and steps through numerous calculations to arrive at several key margins of safety for each member in a joint. It also checks for joint gapping, provides fatigue calculations, and generates joint diagrams for a visual reference. Optimum fastener size and material, as well as correct torque, can then be provided. Analysis methodology, equations, and guidelines are provided throughout the solution sequence so that this program does not become a "black box:" for the analyst. There are built-in databases that reduce the legwork required by the analyst. Each step is clearly identified and results are provided in number format, as well as color-coded spelled-out words to draw user attention. The three key features of the software are robust technical content, innovative and user friendly I/O, and a large database. The program addresses every aspect of bolted joint analysis and proves to be an instructional tool at the same time. It saves analysis time, has intelligent messaging features, and catches operator errors in real time.

  5. Sideline Management of Joint Dislocations.

    PubMed

    Schupp, Christian M; Rand, Scott E; Hanson, Travis W; Lee, Bryan M; Jafarnia, Korsh; Jia, Yuhang; Moseley, J Bruce; Seaberg, John P; Seelhoefer, Gregory M

    2016-01-01

    Athletes can sustain a large variety of injuries from simple soft tissue sprains to complex fractures and joint dislocations. This article reviews and provides the most recent information for sports medicine professionals on the management of simple and complex joint dislocations, i.e., irreducible and/or associated with a fracture, from the sidelines without the benefit of imaging. For each joint, the relevant anatomy, common mechanisms, sideline assessment, reduction techniques, initial treatment, and potential complications will be discussed, which allow for the safe and prompt return of athletes to the field of play. PMID:27172077

  6. Compliant Prosthetic Or Robotic Joint

    NASA Technical Reports Server (NTRS)

    Kerley, James J.; Eklund, Wayne D.

    1989-01-01

    Rotation partly free and partly restrained by resilience and damping. Joint includes U-shaped x- and y-axis frames joined by cables that cross in at center piece. The y-axis frame rotates about y-axis on roller bearing within predetermined angular range. The y-axis frame rotates slightly farther when arm strikes stop, because cables can twist. This mimics compliant resistance of knee joint reaching limit of its forward or backward motion. Used in prosthetic device to replace diseased or damage human joint, or in robot linkage to limit movement and cushion overloads.

  7. Characteristics of temporomandibular joint in patients with temporomandibular joint complaint

    PubMed Central

    Li, Yanfeng; Guo, Xiaoqian; Sun, Xiaoxue; Wang, Ning; Xie, Min; Zhang, Jianqiang; Lv, Yuan; Han, Weili; Hu, Min; Liu, Hongchen

    2015-01-01

    Introduction: This study was to investigate whether there was statistical difference between the bilateral temporomandibular joint (TMJ) in patients with unilateral TMJ pain or joint sounds, using cone beam computed tomography (CBCT). Methods: TMJ CBCT images of 123 cases were used to preliminarily determine the indicators suitable for the measuring method. TMJ CBCT image reconstruction was performed and 19 indicators were measured. Thirty-six cases without TMJ complaint served as controls. The comparison of bilateral TMJs was analyzed by paired t-test to find out the indicators without statistical significance. Twenty-nine patients with unilateral TMJ pain or joint sounds who underwent CBCT at the hospital were enrolled for the comparative study. The measured values were analyzed by paired t-test to determine the indicators with statistical difference. Results: In the control group, only radius value of bilateral TMJ was different statistically (P < 0.05). In the TMJ complaint group, the vertical 60° joint space of the bilateral TMJ was statistically different (P < 0.05) and the rest of the measured values showed no statistical difference. Conclusions: In the patients with unilateral TMJ pain or joint sounds, the vertical 60° joint space of the symptomatic side was significantly increased comparing with the asymptomatic side. PMID:26629112

  8. Developing, enabling and facilitating practice-based research in primary dental care. Report of a one-day seminar, held at the Royal College of Surgeons of England on Friday, 1st February 2008.

    PubMed

    Eaton, Kenneth A; Narain, Amrita; Batchelor, Paul

    2008-07-01

    As part of the Faculty of General Dental Practice (UK)'s strategy to develop a research base for primary dental care, a one-day seminar was held at The Royal College of Surgeons of England on Friday, 1st February 2008. The aims for the day were to bring together the Divisional Research Contacts (DRCs), Faculty members with an interest in research, and regional and national leaders in primary care research; to update DRCs and Faculty members on developments and opportunities in primary care research; and to raise awareness of the Faculty's work among the leaders of primary care research. Of the 33 who attended the seminar, 12 were DRCs. PMID:18755058

  9. Campus/Industry Joint Ventures.

    ERIC Educational Resources Information Center

    McDonald, Eugene J.

    1985-01-01

    Opportunities for joint economic ventures of colleges and industry are discussed, and a variety of ventures undertaken by Duke University are outlined, including a health club, hotel, and office building. Tax and financing considerations are noted. (MSE)

  10. Joint probabilities and quantum cognition

    SciTech Connect

    Acacio de Barros, J.

    2012-12-18

    In this paper we discuss the existence of joint probability distributions for quantumlike response computations in the brain. We do so by focusing on a contextual neural-oscillator model shown to reproduce the main features of behavioral stimulus-response theory. We then exhibit a simple example of contextual random variables not having a joint probability distribution, and describe how such variables can be obtained from neural oscillators, but not from a quantum observable algebra.

  11. Joint probabilities and quantum cognition

    NASA Astrophysics Data System (ADS)

    de Barros, J. Acacio

    2012-12-01

    In this paper we discuss the existence of joint probability distributions for quantumlike response computations in the brain. We do so by focusing on a contextual neural-oscillator model shown to reproduce the main features of behavioral stimulus-response theory. We then exhibit a simple example of contextual random variables not having a joint probability distribution, and describe how such variables can be obtained from neural oscillators, but not from a quantum observable algebra.

  12. Pyrothermal treatment of welded joints

    SciTech Connect

    Serikov, S.V.; Idiyatullin, R.S.; Myakushkin, S.N.; Yaufman, V.V.

    1992-03-01

    The results of investigation of the structure and distribution of residual stresses in welded joints in pipes after heat treatment, which includes heating of the surface being treated due to combustion of plates formed from a thermite-type material of pyrotechnic composition, placed around the perimeter of the welded joint, and also an assessment of the level of residual stresses prior to and after pyrotechnic treatment demonstrated the promising nature of the proposed method. 5 refs., 5 figs.

  13. 47 CFR 76.912 - Joint certification.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Joint certification. 76.912 Section 76.912... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities may apply for joint certification and may engage in joint regulation, including, but not limited...

  14. 47 CFR 76.912 - Joint certification.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 4 2012-10-01 2012-10-01 false Joint certification. 76.912 Section 76.912... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities may apply for joint certification and may engage in joint regulation, including, but not limited...

  15. 42 CFR 422.1040 - Joint hearings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 3 2011-10-01 2011-10-01 false Joint hearings. 422.1040 Section 422.1040 Public...) MEDICARE PROGRAM MEDICARE ADVANTAGE PROGRAM Appeal procedures for Civil Money Penalties § 422.1040 Joint... conference or hearing and conduct all proceedings jointly. If joint hearings are held, a single record of...

  16. 32 CFR 536.54 - Joint tortfeasors.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 3 2013-07-01 2013-07-01 false Joint tortfeasors. 536.54 Section 536.54... AGAINST THE UNITED STATES Investigation and Processing of Claims § 536.54 Joint tortfeasors. When joint... United States rather than pay the claim in full and then bring suit against the joint tortfeasor...

  17. 32 CFR 536.54 - Joint tortfeasors.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 3 2012-07-01 2009-07-01 true Joint tortfeasors. 536.54 Section 536.54 National... UNITED STATES Investigation and Processing of Claims § 536.54 Joint tortfeasors. When joint tortfeasors... United States rather than pay the claim in full and then bring suit against the joint tortfeasor...

  18. 21 CFR 26.73 - Joint Committee.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Joint Committee. 26.73 Section 26.73 Food and...Frameworkâ Provisions § 26.73 Joint Committee. (a) A Joint Committee consisting of representatives of the United States and the European Community (EC) will be established. The Joint Committee shall...

  19. 32 CFR 536.54 - Joint tortfeasors.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 3 2011-07-01 2009-07-01 true Joint tortfeasors. 536.54 Section 536.54 National... UNITED STATES Investigation and Processing of Claims § 536.54 Joint tortfeasors. When joint tortfeasors... United States rather than pay the claim in full and then bring suit against the joint tortfeasor...

  20. 49 CFR 234.233 - Rail joints.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Rail joints. 234.233 Section 234.233... joints. Each non-insulated rail joint located within the limits of a highway-rail grade crossing train detection circuit shall be bonded by means other than joint bars and the bonds shall be maintained in...

  1. 42 CFR 422.1040 - Joint hearings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Joint hearings. 422.1040 Section 422.1040 Public...) MEDICARE PROGRAM MEDICARE ADVANTAGE PROGRAM Appeal procedures for Civil Money Penalties § 422.1040 Joint... conference or hearing and conduct all proceedings jointly. If joint hearings are held, a single record of...

  2. 14 CFR 23.693 - Joints.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Joints. 23.693 Section 23.693 Aeronautics... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings,...

  3. 42 CFR 422.1040 - Joint hearings.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 3 2012-10-01 2012-10-01 false Joint hearings. 422.1040 Section 422.1040 Public....1040 Joint hearings. When two or more affected parties have requested hearings and the same or... the prehearing conference or hearing and conduct all proceedings jointly. If joint hearings are...

  4. 32 CFR 536.54 - Joint tortfeasors.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 3 2014-07-01 2014-07-01 false Joint tortfeasors. 536.54 Section 536.54... AGAINST THE UNITED STATES Investigation and Processing of Claims § 536.54 Joint tortfeasors. When joint... United States rather than pay the claim in full and then bring suit against the joint tortfeasor...

  5. 49 CFR 234.233 - Rail joints.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Rail joints. 234.233 Section 234.233... joints. Each non-insulated rail joint located within the limits of a highway-rail grade crossing train detection circuit shall be bonded by means other than joint bars and the bonds shall be maintained in...

  6. 14 CFR 23.693 - Joints.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Joints. 23.693 Section 23.693 Aeronautics... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings,...

  7. 14 CFR 23.693 - Joints.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Joints. 23.693 Section 23.693 Aeronautics... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings,...

  8. 21 CFR 26.73 - Joint Committee.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Joint Committee. 26.73 Section 26.73 Food and...Frameworkâ Provisions § 26.73 Joint Committee. (a) A Joint Committee consisting of representatives of the United States and the European Community (EC) will be established. The Joint Committee shall...

  9. 14 CFR 23.693 - Joints.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Joints. 23.693 Section 23.693 Aeronautics... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings,...

  10. 12 CFR 347.107 - Joint ventures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Joint ventures. 347.107 Section 347.107 Banks... INTERNATIONAL BANKING § 347.107 Joint ventures. (a) Joint ventures. If a bank, directly or indirectly, acquires or holds an equity interest in a foreign organization that is a joint venture, and the bank or...

  11. 49 CFR 234.233 - Rail joints.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Rail joints. 234.233 Section 234.233..., Inspection, and Testing Maintenance Standards § 234.233 Rail joints. Each non-insulated rail joint located... than joint bars and the bonds shall be maintained in such condition to ensure electrical conductivity....

  12. 12 CFR 347.107 - Joint ventures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Joint ventures. 347.107 Section 347.107 Banks... INTERNATIONAL BANKING § 347.107 Joint ventures. (a) Joint ventures. If a bank, directly or indirectly, acquires or holds an equity interest in a foreign organization that is a joint venture, and the bank or...

  13. 14 CFR 23.693 - Joints.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Joints. 23.693 Section 23.693 Aeronautics... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings,...

  14. 12 CFR 347.107 - Joint ventures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Joint ventures. 347.107 Section 347.107 Banks... INTERNATIONAL BANKING § 347.107 Joint ventures. (a) Joint ventures. If a bank, directly or indirectly, acquires or holds an equity interest in a foreign organization that is a joint venture, and the bank or...

  15. 42 CFR 423.1040 - Joint hearings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Joint hearings. 423.1040 Section 423.1040 Public... § 423.1040 Joint hearings. When two or more affected parties have requested hearings and the same or... the prehearing conference or hearing and conduct all proceedings jointly. If joint hearings are...

  16. 21 CFR 26.73 - Joint Committee.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Joint Committee. 26.73 Section 26.73 Food and...Frameworkâ Provisions § 26.73 Joint Committee. (a) A Joint Committee consisting of representatives of the United States and the European Community (EC) will be established. The Joint Committee shall...

  17. 12 CFR 347.107 - Joint ventures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Joint ventures. 347.107 Section 347.107 Banks... INTERNATIONAL BANKING § 347.107 Joint ventures. (a) Joint ventures. If a bank, directly or indirectly, acquires or holds an equity interest in a foreign organization that is a joint venture, and the bank or...

  18. 12 CFR 347.107 - Joint ventures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Joint ventures. 347.107 Section 347.107 Banks... INTERNATIONAL BANKING § 347.107 Joint ventures. (a) Joint ventures. If a bank, directly or indirectly, acquires or holds an equity interest in a foreign organization that is a joint venture, and the bank or...

  19. 49 CFR 234.233 - Rail joints.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Rail joints. 234.233 Section 234.233..., Inspection, and Testing Maintenance Standards § 234.233 Rail joints. Each non-insulated rail joint located... than joint bars and the bonds shall be maintained in such condition to ensure electrical conductivity....

  20. 47 CFR 76.912 - Joint certification.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Joint certification. 76.912 Section 76.912... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities may apply for joint certification and may engage in joint regulation, including, but not limited...

  1. 21 CFR 26.73 - Joint Committee.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Joint Committee. 26.73 Section 26.73 Food and...Frameworkâ Provisions § 26.73 Joint Committee. (a) A Joint Committee consisting of representatives of the United States and the European Community (EC) will be established. The Joint Committee shall...

  2. 21 CFR 26.73 - Joint Committee.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Joint Committee. 26.73 Section 26.73 Food and...Frameworkâ Provisions § 26.73 Joint Committee. (a) A Joint Committee consisting of representatives of the United States and the European Community (EC) will be established. The Joint Committee shall...

  3. 47 CFR 76.912 - Joint certification.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Joint certification. 76.912 Section 76.912... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities may apply for joint certification and may engage in joint regulation, including, but not limited...

  4. 47 CFR 76.912 - Joint certification.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Joint certification. 76.912 Section 76.912... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities may apply for joint certification and may engage in joint regulation, including, but not limited...

  5. 32 CFR 536.54 - Joint tortfeasors.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Joint tortfeasors. 536.54 Section 536.54 National... UNITED STATES Investigation and Processing of Claims § 536.54 Joint tortfeasors. When joint tortfeasors... United States rather than pay the claim in full and then bring suit against the joint tortfeasor...

  6. 42 CFR 422.1040 - Joint hearings.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 3 2014-10-01 2014-10-01 false Joint hearings. 422.1040 Section 422.1040 Public....1040 Joint hearings. When two or more affected parties have requested hearings and the same or... the prehearing conference or hearing and conduct all proceedings jointly. If joint hearings are...

  7. 42 CFR 423.1040 - Joint hearings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 3 2011-10-01 2011-10-01 false Joint hearings. 423.1040 Section 423.1040 Public... § 423.1040 Joint hearings. When two or more affected parties have requested hearings and the same or... the prehearing conference or hearing and conduct all proceedings jointly. If joint hearings are...

  8. 42 CFR 422.1040 - Joint hearings.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 3 2013-10-01 2013-10-01 false Joint hearings. 422.1040 Section 422.1040 Public....1040 Joint hearings. When two or more affected parties have requested hearings and the same or... the prehearing conference or hearing and conduct all proceedings jointly. If joint hearings are...

  9. 49 CFR 234.233 - Rail joints.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Rail joints. 234.233 Section 234.233... joints. Each non-insulated rail joint located within the limits of a highway-rail grade crossing train detection circuit shall be bonded by means other than joint bars and the bonds shall be maintained in...

  10. Condylar hyperplasia following unilateral temporomandibular joint replacement.

    PubMed

    Machon, V; Levorova, J; Hirjak, D; Foltan, R

    2015-06-01

    Total joint replacement of the temporomandibular joint (TJR) can be associated with intraoperative and postoperative complications. We report herein the occurrence of a postoperative open bite malocclusion, the result of condylar hyperplasia affecting the non-operated joint at 1 year after unilateral total joint replacement. PMID:25662429

  11. Simplified procedures for designing composite bolted joints

    NASA Technical Reports Server (NTRS)

    Chamis, Christos C.

    1988-01-01

    Simplified procedures are described to design and analyze single and multi-bolt composite joints. Numerical examples illustrate the use of these methods. Factors affecting composite bolted joints are summarized. References are cited where more detailed discussion is presented on specific aspects of composite bolted joints. Design variables associated with these joints are summarized in the appendix.

  12. Management of acromioclavicular joint injuries.

    PubMed

    Li, Xinning; Ma, Richard; Bedi, Asheesh; Dines, David M; Altchek, David W; Dines, Joshua S

    2014-01-01

    Acromioclavicular joint injuries are among the most common shoulder girdle injuries in athletes and most commonly result from a direct force to the acromion with the arm in an adducted position. Acromioclavicular joint injuries often present with associated injuries to the glenohumeral joint, including an increased incidence of superior labrum anterior posterior (SLAP) tears that may warrant further evaluation and treatment. Anteroposterior stability of the acromioclavicular joint is conferred by the capsule and acromioclavicular ligaments, of which the posterior and superior ligaments are the strongest. Superior-inferior stability is maintained by the coracoclavicular (conoid and trapezoid) ligaments. Type-I or type-II acromioclavicular joint injuries have been treated with sling immobilization, early shoulder motion, and physical therapy, with favorable outcomes. Return to activity can occur when normal shoulder motion and strength are obtained and the shoulder is asymptomatic as compared with the contralateral normal extremity. The management of type-III injuries remains controversial and is individualized. While a return to the previous level of functional activity with nonsurgical treatment has been documented in a number of case series, surgical reduction and coracoclavicular ligament reconstruction has been associated with a favorable outcome and can be considered in patients who place high functional demands on their shoulders or in athletes who participate in overhead sports. Surgical management is indicated for high-grade (≥type IV) acromioclavicular joint injuries to achieve anatomic reduction of the acromioclavicular joint, reconstruction of the coracoclavicular ligaments, and repair of the deltotrapezial fascia. Outcomes after surgical reconstruction of the coracoclavicular ligaments have been satisfactory with regard to achieving pain relief and return to functional activities, but further improvements in the biomechanical strength of these

  13. Disorders of the distal radioulnar joint.

    PubMed

    Houdek, Matthew T; Wagner, Eric R; Moran, Steven L; Berger, Richard A

    2015-01-01

    The distal radioulnar joint is responsible for stable forearm rotation. Injury to this joint can occur following a variety of mechanisms, including wrist fractures, ligamentous damage, or degenerative wear. Accurate diagnosis requires a clear understanding of the anatomy and mechanics of the ulnar aspect of the wrist. Injuries can be divided into three major categories for diagnostic purposes, and these include pain without joint instability, pain with joint instability, and joint arthritis. New advancements in imaging and surgical technique can allow for earlier detection of injuries, potentially preserving joint function. In this article, the authors review the pertinent anatomy, biomechanics, and major abnormality involving the distal radioulnar joint. PMID:25285686

  14. Migrating bone shards in dissecting Charcot joints.

    PubMed

    Forrester, D M; Magre, G

    1978-06-01

    Extensive periarticular calcification is characteristic of Charcot joints. Fragmentation of the articular margins of bone contributes to the bony detritus, but the majority forms de novo in the joint capsule. Occasionally the calcific debris is seen far removed from the joint. Dissection of a chronically distended joint along muscle planes is most commonly associated with the inflammatory joint disease of rheumatoid arthritis. Its occurrence in Charcot joints is documented by arthrography, which demonstrates continuity of the joint space and the distant calcifications. PMID:418652

  15. Encapsulated Ruffini-like endings in human lumbar facet joints

    PubMed Central

    VANDENABEELE, F.; CREEMERS, J.; LAMBRICHTS, I.; LIPPENS, P.; JANS, M.

    1997-01-01

    The innervation of the human lumbar facet joint capsule was studied by light and electron microscopy. Small numbers of encapsulated corpuscular endings were identified in the dense fibrous layer. Clusters of 2 types of endings were found: small cylindrical corpuscles (type 1) and large fusiform corpuscles (type 2). The corpuscles were classified structurally as Ruffini-type endings. The 1st type was predominant and characterised by a compartmentalised receptor complex, a thin perineurial capsule and a narrow subcapsular space. The 2nd type was characterised by a thicker perineurial capsule, a ‘spindle-like’ receptive complex, and an extensive subcapsular space with capillaries and concentrically oriented fibroblast-like cells. Both types of endings were innervated mainly by thinly myelinated group III (A delta) and unmyelinated group IV (C) nerve fibres that branched and terminated in the receptor complex. Their sensory endings were intimately related to the collagen fibre bundles as multiple enlarged axonal segments (‘beads’) with ultrastructural features which were characteristic of receptive sites: an accumulation of mitochondria and vesicles, and ‘bare’ areas of axolemma lacking a Schwann cell investment but covered by a thin basal lamina. Some beads in the 2nd type of ending contained granular vesicles, 30–60 mm in diameter, resembling sympathetic nerve endings. Small diameter collagen fibrils situated within multilayered basal laminae were found among the multiple receptive sites in the receptive complex in both types of ending. Their possible functional significance in mechanoreception is discussed. Particular attention has been given to their apparent variable orientation to the mechanoreceptive site. PMID:9449076

  16. Strength evaluation of socket joints

    NASA Technical Reports Server (NTRS)

    Rash, Larry C.

    1994-01-01

    This report documents the development of a set of equations that can be used to provide a relatively simple solution for identifying the strength of socket joints and for most cases avoid the need of more lengthy analyses. The analytical approach was verified by comparison of the contact load distributions to results obtained from a finite element analysis. The contacting surfaces for the specific joint in this analysis are in the shape of frustrums of a cone and are representative of the tapered surfaces in the socket-type joints used to join segments of model support systems for wind tunnels. The results are in the form of equations that can be used to determine the contact loads and stresses in the joint from the given geometry and externally applied loads. Equations were determined to define the bending moments and stresses along the length of the joints based on strength and materials principles. The results have also been programmed for a personal computer and a copy of the program is included.

  17. An analysis of a joint shear model for jointed media with orthogonal joint sets; Yucca Mountain Site Characterization Project

    SciTech Connect

    Koteras, J.R.

    1991-10-01

    This report describes a joint shear model used in conjunction with a computational model for jointed media with orthogonal joint sets. The joint shear model allows nonlinear behavior for both joint sets. Because nonlinear behavior is allowed for both joint sets, a great many cases must be considered to fully describe the joint shear behavior of the jointed medium. An extensive set of equations is required to describe the joint shear stress and slip displacements that can occur for all the various cases. This report examines possible methods for simplifying this set of equations so that the model can be implemented efficiently form a computational standpoint. The shear model must be examined carefully to obtain a computationally efficient implementation that does not lead to numerical problems. The application to fractures in rock is discussed. 5 refs., 4 figs.

  18. Rheumatoid arthritis affecting temporomandibular joint

    PubMed Central

    Sodhi, Amandeep; Naik, Shobha; Pai, Anuradha; Anuradha, Ardra

    2015-01-01

    Rheumatoid arthritis (RA) is a chronic, systemic, autoimmune inflammatory disorder that is characterized by joint inflammation, erosive properties and symmetric multiple joint involvement. Temporomandibular joint (TMJ) is very rare to be affected in the early phase of the disease, thus posing diagnostic challenges for the dentist. Conventional radiographs fail to show the early lesions due to its limitations. More recently cone-beam computed tomography (CBCT) has been found to diagnose the early degenerative changes of TMJ and hence aid in the diagnosis of the lesions more accurately. Our case highlights the involvement of TMJ in RA and the role of advanced imaging (CBCT) in diagnosing the bony changes in the early phase of the disease. PMID:25684928

  19. Denervation of the wrist joint.

    PubMed

    Buck-Gramcko, D

    1977-01-01

    A collective review was made of the results of denervation of the wrist joint for painful restrictiorn of motion done in 313 patients and follow-up studies on 195 (average 4.1 years, ranging from 9 months to 14 years). Complete denervation was done in only 30, partial denervation in the others being done after testing with local anesthetic blocks. Sixty-nine of the patients retained a moble wrist without pain or with slight pain with heavy work. No evidence of Charcot-like joints was seen. Poorest results followed when the operation was done for sequelae of intra-articular fracture of the radius, fracture dislocations, unstable ligamentous support, joint surface destruction, or for those required to do heavy manual labor. Arthrodesis was done secondarily in nine patients. PMID:839055

  20. Rothia prosthetic knee joint infection.

    PubMed

    Trivedi, Manish N; Malhotra, Prashant

    2015-08-01

    Rothia species - Gram-positive pleomorphic bacteria that are part of the normal oral and respiratory flora - are commonly associated with dental cavities and periodontal disease although systemic infections have been described. We describe a 53-year-old female with rheumatoid arthritis complicated by prosthetic knee joint infection due to Rothia species, which was successfully treated by surgical removal of prosthesis and prolonged antimicrobial therapy. The issue of antibiotic prophylaxis before dental procedures among patients with prosthetic joint replacements is discussed. PMID:23357608

  1. Solder Joint Health Monitoring Testbed

    NASA Technical Reports Server (NTRS)

    Delaney, Michael M.; Flynn, James G.; Browder, Mark E.

    2009-01-01

    A method of monitoring the health of selected solder joints, called SJ-BIST, has been developed by Ridgetop Group Inc. under a Small Business Innovative Research (SBIR) contract. The primary goal of this research program is to test and validate this method in a flight environment using realistically seeded faults in selected solder joints. An additional objective is to gather environmental data for future development of physics-based and data-driven prognostics algorithms. A test board is being designed using a Xilinx FPGA. These boards will be tested both in flight and on the ground using a shaker table and an altitude chamber.

  2. [Divorce and joint physical custody].

    PubMed

    Golse, B

    2014-04-01

    This work first recalls the definition of joint physical custody, as well as the current legal procedure for obtaining it, its practical implementation, the financial implications for parents, and finally some statistics. Some psychological and psychopathological reflections on the impact of divorce on children are then presented before considering the question of joint physically custody with regard to attachment theory and depending on the age of the child (a great caution seems to be required before three years). The article concludes with a brief discussion of parental alienation syndrome. PMID:24630624

  3. [Pathobiochemistry of joint destruction in inflammatory and degenerative joint diseases].

    PubMed

    Greiling, H; Kleesiek, K; Reinards, R

    1987-08-01

    While the biochemical mechanism which leads to the destruction of joints in the course of degenerative and inflammatory arthropathies has not been cleared up completely to this day, basic differences have been noted in the way the two types of arthropathy affect the articular cartilage. The differences are described from the viewpoint of pathobiochemistry as they are fundamental to causal therapy. PMID:3314203

  4. FRF based joint dynamics modeling and identification

    NASA Astrophysics Data System (ADS)

    Mehrpouya, Majid; Graham, Eldon; Park, Simon S.

    2013-08-01

    Complex structures, such as machine tools, are comprised of several substructures connected to each other through joints to form the assembled structures. Joints can have significant contributions on the behavior of the overall assembly and ignoring joint effects in the design stage may result in considerable deviations from the actual dynamic behavior. The identification of joint dynamics enables us to accurately predict overall assembled dynamics by mathematically combining substructure dynamics through the equilibrium and compatibility conditions at the joint. The essence of joint identification is the determination of the difference between the measured overall dynamics and the rigidly coupled substructure dynamics. In this study, we investigate the inverse receptance coupling (IRC) method and the point-mass joint model, which considers the joint as lumped mass, damping and stiffness elements. The dynamic properties of the joint are investigated using both methods through a finite element (FE) simulation and experimental tests. `100

  5. The 1st Grade Plant Museum.

    ERIC Educational Resources Information Center

    Wallach, Christine; Callahan, Susan

    1994-01-01

    A Saint Louis school experimenting with applying multiple intelligences theory to curricula and instruction defines "genuine understanding" as using information in novel ways. By surveying area museums and designing user-friendly botanical exhibits for a community-based project, first graders developed a better understanding of their own varied…

  6. GALEX 1st Light Near Ultraviolet -50

    NASA Technical Reports Server (NTRS)

    2003-01-01

    This image was taken May 21 and 22 by NASA's Galaxy Evolution Explorer. The image was made from data gathered by the two channels of the spacecraft camera during the mission's 'first light' milestone. It shows about 50 celestial objects in the constellation Hercules. The reddish objects represent those detected by the camera's near ultraviolet channel over a 5-minute period, while bluish objects were detected over a 3-minute period by the camera's far ultraviolet channel. Deeper imaging may confirm the apparent existence in this field of galaxy pairs and triplets or individual star formation regions in single galaxies.

    The Galaxy Evolution Explorer's first light images are dedicated to the crew of the Space Shuttle Columbia. The Hercules region was directly above Columbia when it made its last contact with NASA Mission Control on February 1, over the skies of Texas.

    The Galaxy Evolution Explorer launched on April 28 on a mission to map the celestial sky in the ultraviolet and determine the history of star formation in the universe over the last 10 billion years.

  7. GALEX 1st Light Near Ultraviolet

    NASA Technical Reports Server (NTRS)

    2003-01-01

    This image was taken on May 21 and 22 by NASA's Galaxy Evolution Explorer. The image was made from data gathered during the missions 'first light' milestone, and shows celestial objects in the constellation Hercules. The objects shown represent those detected by the camera's near ultraviolet channel over a 5-minute period. The radial streaks at the edge of the image are due to stars reflecting from the near ultraviolet detector window.

    The Galaxy Evolution Explorer's first light images are dedicated to the crew of the Space Shuttle Columbia. The Hercules region was directly above Columbia when it made its last contact with NASA Mission Control on February 1, over the skies of Texas.

    The Galaxy Evolution Explorer launched on April 28 on a mission to map the celestial sky in the ultraviolet and determine the history of star formation in the universe over the last 10 billion years.

  8. GALEX 1st Light Far Ultraviolet

    NASA Technical Reports Server (NTRS)

    2003-01-01

    This image was taken May 21 and 22 by NASA's Galaxy Evolution Explorer. The image was made from data gathered by the far ultraviolet channel of the spacecraft camera during the mission's 'first light' milestone. It shows about 400 celestial objects, appearing in blue, detected over a 3-minute, 20-second period in the constellation Hercules.

    The Galaxy Evolution Explorer's first light images are dedicated to the crew of the Space Shuttle Columbia. The Hercules region was directly above Columbia when it made its last contact with NASA Mission Control on February 1, over the skies of Texas.

    The Galaxy Evolution Explorer launched on April 28 on a mission to map the celestial sky in the ultraviolet and determine the history of star formation in the universe over the last 10 billion years.

  9. Dewarless Logging Tool - 1st Generation

    SciTech Connect

    HENFLING,JOSEPH A.; NORMANN,RANDY A.

    2000-08-01

    This report focuses on Sandia National Laboratories' effort to create high-temperature logging tools for geothermal applications without the need for heat shielding. One of the mechanisms for failure in conventional downhole tools is temperature. They can only survive a limited number of hours in high temperature environments. For the first time since the evolution of integrated circuits, components are now commercially available that are qualified to 225 C with many continuing to work up to 300 C. These components are primarily based on Silicon-On-Insulator (SOI) technology. Sandia has developed and tested a simple data logger based on this technology that operates up to 300 C with a few limiting components operating to only 250 C without thermal protection. An actual well log to 240 C without shielding is discussed. The first prototype high-temperature tool measures pressure and temperature using a wire-line for power and communication. The tool is based around the HT83C51 microcontroller. A brief discussion of the background and status of the High Temperature Instrumentation program at Sandia, objectives, data logger development, and future project plans are given.

  10. The Rationale for Joint Mobilization.

    ERIC Educational Resources Information Center

    Burkhardt, Sandy

    This paper presents an overview of the functions of connective tissue and the mechanisms of joint injury and contracture formation in relation to therapeutic exercise. The components of connective tissue operation are explained, including fibroblasts, macrophages, plasma cells, and collagen. An examination of the histology of connective tissue as…

  11. Knee joint replacement prosthesis (image)

    MedlinePlus

    A prosthesis is a device designed to replace a missing part of the body, or to make a part of the body work better. The metal prosthetic device in knee joint replacement surgery replaces cartilage and bone which is damaged from disease or aging.

  12. Joint BioEnergy Institute

    SciTech Connect

    Keasling, Jay; Simmons, Blake; Tartaglino, Virginia; Baidoo, Edward; Kothari, Ankita

    2015-06-15

    The Joint BioEnergy Institute (JBEI) is a U.S. Department of Energy (DOE) Bioenergy Research Center dedicated to developing advanced biofuels—liquid fuels derived from the solar energy stored in plant biomass that can replace gasoline, diesel and jet fuels.

  13. Threaded joint design for composites

    SciTech Connect

    Hahn, H.T.; Kallas, M.N. . Composites Mfg. Technology Center)

    1989-06-01

    This report summarizes work on the design of a composite threaded joint. Although the project was for a year, it was placed on hold about half way through the program at the stage of model refinement. Thus, the report provides only partial results on the design of a threaded joint. Composite joining is one of the major obstacles preventing composites from side usage. The difficulties in joining composite structures arise from factors associated with the anisotropic nature of these materials which are strong and stiff in the fiber direction and very weak in the transverse direction. One well known type of joints is the threaded joint which is used extensively in metallic structures. Among the common thread types is the buttress thread which has advantages when loading is in one direction only. The flank of the thread which almost takes all the thrust is referred to as the pressure flank. It is nearly perpendicular to the thread axis so that the radial component of the thrust is almost zero. Therefore, this form of thread is particularly applicable where tubular members are screwed together as in the case of breech mechanisms of large guns and airplane propeller hubs. In this report, we use a buttress type thread in a composite laminate. The following sections will define the problem and describe the finite element model proposed to solve the problem. Some preliminary results are also included in the report.

  14. An Introduction to Joint Control

    ERIC Educational Resources Information Center

    Lowenkron, Barry

    2006-01-01

    Lowenkron and colleagues (Lowenkron, 1984; 1991; 1998; 2006; Lowenkron and Colvin, 1992) describe a model that explains complex behavior using only well-established behavioral principles, concepts and terms. The model, called "joint control," is especially useful for understanding complex and delayed discriminations within a purely behavioral…

  15. Stress-relieved solder joints

    NASA Technical Reports Server (NTRS)

    Zemenick, C. J.

    1980-01-01

    Mechanical stress on solder joints is reduced by procedure for soldering electronic components to circuit boards. Procedure was developed for radio-frequency (RF) strip-line circuits, for which dimensions must be carefully controlled to minimize parasitic capacitance and inductance. Procedure consists of loosening component from its mounting after each lead is soldered relieving induced stresses before next soldering step.

  16. Cryopumping Field Joint Can Testing

    NASA Technical Reports Server (NTRS)

    Johnson, Wesley L.; Fesmire, James E.; Meneghelli, Barry E.

    2011-01-01

    For long installations, vacuum jacketed piping often comes in 40 foot sections that are butt welded together in the field. A short can is then welded over the bare pipe connection to allow for insulation to be protected from the environment. Traditionally, the field joint is insulated with multilayer insulation and a vacuum is pulled on the can to minimize heat leak through the bare section and prevent frost from forming on the pipe section. The vacuum jacketed lines for the Ares I mobile launch platform were to be a combined 2000 feet long, with 60+ pipe sections and field joint cans. Historically, Kennedy Space Center has drilled a hole in the long sections to create a common vacuum with the field joint can to minimize maintenance on the vacuum jacketed piping. However, this effort looked at ways to use a passive system that didn't require a vacuum, but may cryopump to create its own vacuum. Various forms of aerogel, multilayer insulations, and combinations thereof were tested to determine the best method of insulating the field joint while minimizing maintenance and thermal losses.

  17. The Joint Accomplishment of Identity

    ERIC Educational Resources Information Center

    Hand, Victoria; Gresalfi, Melissa

    2015-01-01

    Identity has become a central concept in the analysis of learning from social perspectives. In this article, we draw on a situative perspective to conceptualize identity as a "joint accomplishment" between individuals and their interactions with norms, practices, cultural tools, relationships, and institutional and cultural contexts.…

  18. Current practice of epidemiology in Africa: highlights of the 3rd conference of the African epidemiological association and 1st conference of the Cameroon society of epidemiology, Yaoundé, Cameroon, 2014

    PubMed Central

    Nkwescheu, Armand Seraphin; Fokam, Joseph; Tchendjou, Patrice; Nji, Akindeh; Ngouakam, Hermann; Andre, Bita Fouda; Joelle, Sobngwi; Uzochukwu, Benjamin; Akinroye, Kingsley; Mbacham, Wilfred; Colizzi, Vittorio; Leke, Rose; Victora, Cesar

    2015-01-01

    As the study of disease occurrence and health indicators in human populations, Epidemiology is a dynamic field that evolves with time and geographical context. In order to update African health workers on current epidemiological practices and to draw awareness of early career epidemiologists on concepts and opportunities in the field, the 3rd African Epidemiology Association and the 1st Cameroon Society of Epidemiology Conference was organized in June 2-6, 2014 at the Yaoundé Mont Febe Hotel, in Cameroon. Under the theme«Practice of Epidemiology in Africa: Stakes, Challenges and Perspectives», the conference attracted close to five hundred guest and participants from all continents. The two main programs were the pre-conference course for capacity building of African Early Career epidemiologists, and the conference itself, providing a forum for scientific exchanges on recent epidemiological concepts, encouraging the use of epidemiological methods in studying large disease burden and neglected tropical diseases; and highlighting existing opportunities. PMID:26523191

  19. 2014 Female Athlete Triad Coalition Consensus Statement on Treatment and Return to Play of the Female Athlete Triad: 1st International Conference held in San Francisco, California, May 2012 and 2nd International Conference held in Indianapolis, Indiana, May 2013.

    PubMed

    De Souza, Mary Jane; Nattiv, Aurelia; Joy, Elizabeth; Misra, Madhusmita; Williams, Nancy I; Mallinson, Rebecca J; Gibbs, Jenna C; Olmsted, Marion; Goolsby, Marci; Matheson, Gordon

    2014-02-01

    The Female Athlete Triad is a medical condition often observed in physically active girls and women, and involves three components: (1) low energy availability with or without disordered eating, (2) menstrual dysfunction and (3) low bone mineral density. Female athletes often present with one or more of the three Triad components, and an early intervention is essential to prevent its progression to serious endpoints that include clinical eating disorders, amenorrhoea and osteoporosis. This consensus statement represents a set of recommendations developed following the 1st (San Francisco, California, USA) and 2nd (Indianapolis, Indiana, USA) International Symposia on the Female Athlete Triad. It is intended to provide clinical guidelines for physicians, athletic trainers and other healthcare providers for the screening, diagnosis and treatment of the Female Athlete Triad and to provide clear recommendations for return to play. The 2014 Female Athlete Triad Coalition Consensus Statement on Treatment and Return to Play of the Female Athlete Triad expert panel has proposed a risk stratification point system that takes into account magnitude of risk to assist the physician in decision-making regarding sport participation, clearance and return to play. Guidelines are offered for clearance categories, management by a multidisciplinary team and implementation of treatment contracts. This consensus paper has been endorsed by the Female Athlete Triad Coalition, an International Consortium of leading Triad researchers, physicians and other healthcare professionals, the American College of Sports Medicine and the American Medical Society for Sports Medicine. PMID:24463911

  20. Arthritis Mechanisms May Vary by Joint

    MedlinePlus

    ... Molecular differences between knee and hip joints with rheumatoid arthritis may inform more personal treatment strategies. Sebastian Kaulitzki/Hemera/Thinkstock Knee and hip joints with rheumatoid arthritis have differing genetic markers linked to inflammation, suggesting ...

  1. Shear-Joint Capability Versus Bolt Clearance

    NASA Technical Reports Server (NTRS)

    Lee, H. M.

    1994-01-01

    NASA Technical Memorandum presents theoretical study of relationships between load-bearing capabilities of shear joints that comprise plates clamped together by multiple bolts and clearances between bolts and boltholes in those joints.

  2. Aging changes in the bones - muscles - joints

    MedlinePlus

    ... the skin and hair are also common. The skeleton provides support and structure to the body. Joints ... areas where bones come together. They allow the skeleton to be flexible for movement. In a joint, ...

  3. Osteoarthritis Basics: The Joint and Its Parts

    MedlinePlus

    ... on. Feature: Osteoarthritis Osteoarthritis Basics: The Joint and Its Parts Past Issues / Winter 2013 Table of Contents ... type of arthritis. More common in older people, it is sometimes called degenerative joint disease. Osteoarthritis most ...

  4. Seismic response of rock joints and jointed rock mass

    SciTech Connect

    Ghosh, A.; Hsiung, S.M.; Chowdhury, A.H.

    1996-06-01

    Long-term stability of emplacement drifts and potential near-field fluid flow resulting from coupled effects are among the concerns for safe disposal of high-level nuclear waste (HLW). A number of factors can induce drift instability or change the near-field flow patterns. Repetitive seismic loads from earthquakes and thermal loads generated by the decay of emplaced waste are two significant factors. One of two key technical uncertainties (KTU) that can potentially pose a high risk of noncompliance with the performance objectives of 10 CFR Part 60 is the prediction of thermal-mechanical (including repetitive seismic load) effects on stability of emplacement drifts and the engineered barrier system. The second KTU of concern is the prediction of thermal-mechanical-hydrological (including repetitive seismic load) effects on the host rock surrounding the engineered barrier system. The Rock Mechanics research project being conducted at the Center for Nuclear Waste Regulatory Analyses (CNWRA) is intended to address certain specific technical issues associated with these two KTUs. This research project has two major components: (i) seismic response of rock joints and a jointed rock mass and (ii) coupled thermal-mechanical-hydrological (TMH) response of a jointed rock mass surrounding the engineered barrier system (EBS). This final report summarizes the research activities concerned with the repetitive seismic load aspect of both these KTUs.

  5. Joint laxity in the performing arts.

    PubMed

    Bird, H

    2016-01-01

    Traditional scoring systems for the assessment of joint flexibility are reviewed and reasons for variation in joint laxity are defined. The value of controlled joint laxity in the hands and arms of musicians is then discussed as well as the desirability of adjusting laxity at the various joints used in the different styles of dance, some of them ethnic, that depend on the specific articular characteristics of each different dancer. PMID:27245523

  6. Uncalcified Synovial Chondromatosis in the Pisotriquetral Joint.

    PubMed

    Kim, Hyo-Kon; Ha, Sung-Han; Lee, Gi-Jun; Yu, Sun-O; Kim, Jung-Rae

    2015-09-01

    Synovial chondromatosis is a rare lesion in the wrist, but some cases in the distal radioulnar joint have been reported and previous case reports emphasize joint calcifications, shown on preoperative plain radiographs. We report an extremely uncommon case of synovial chondromatosis in the pisotriquetral joint, in which radiographs and magnetic resonance imaging did not demonstrate apparent calcified bodies. In our case, for the accurate diagnosis and treatment, surgical exploration of the joint and synovectomy with removal of loose bodies was performed. PMID:26330969

  7. Uncalcified Synovial Chondromatosis in the Pisotriquetral Joint

    PubMed Central

    Kim, Hyo-Kon; Lee, Gi-Jun; Yu, Sun-O; Kim, Jung-Rae

    2015-01-01

    Synovial chondromatosis is a rare lesion in the wrist, but some cases in the distal radioulnar joint have been reported and previous case reports emphasize joint calcifications, shown on preoperative plain radiographs. We report an extremely uncommon case of synovial chondromatosis in the pisotriquetral joint, in which radiographs and magnetic resonance imaging did not demonstrate apparent calcified bodies. In our case, for the accurate diagnosis and treatment, surgical exploration of the joint and synovectomy with removal of loose bodies was performed. PMID:26330969

  8. Revamped, joint ventures make a comeback.

    PubMed

    Peters, G R

    1991-08-01

    After a period of declining popularity, joint ventures are beginning to re-emerge as viable solution to challenges facing health care. Future joint ventures likely will be different, however, in response to problems and resulting legislation. Healthcare providers interested in starting a joint venture should consider five basic formats and some guidelines for developing them. Joint ventures ultimately may become a focal point for renewed efforts at regional healthcare planning. PMID:10145473

  9. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Rail joints. 213.351 Section 213.351 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Train Operations at Track Classes 6 and Higher § 213.351 Rail joints. (a) Each rail joint, insulated...

  10. Navigating Joint Projects in Telephone Conversations

    ERIC Educational Resources Information Center

    Bangerter, Adrian; Clark, Herbert H.; Katz, Anna R.

    2004-01-01

    Conversation coordinates joint activities and the joint projects that compose them. Participants coordinate (1) vertical transitions on entering and exiting joint projects; and (2) horizontal transitions in continuing within them. Transitions are coordinated using project markers such as uh-huh, yeah, right, and okay. In the authors' proposal,…

  11. 46 CFR 385.38 - Joint funding.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Joint funding. 385.38 Section 385.38 Shipping MARITIME... AGREEMENTS REGULATIONS General Policies § 385.38 Joint funding. (a) Pursuant to section 10(c) of the Act, MarAd is authorized to participate in joint funded projects with other Federal agencies in any...

  12. 46 CFR 385.38 - Joint funding.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Joint funding. 385.38 Section 385.38 Shipping MARITIME... AGREEMENTS REGULATIONS General Policies § 385.38 Joint funding. (a) Pursuant to section 10(c) of the Act, MarAd is authorized to participate in joint funded projects with other Federal agencies in any...

  13. 46 CFR 385.38 - Joint funding.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Joint funding. 385.38 Section 385.38 Shipping MARITIME... AGREEMENTS REGULATIONS General Policies § 385.38 Joint funding. (a) Pursuant to section 10(c) of the Act, MarAd is authorized to participate in joint funded projects with other Federal agencies in any...

  14. 46 CFR 385.38 - Joint funding.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Joint funding. 385.38 Section 385.38 Shipping MARITIME... AGREEMENTS REGULATIONS General Policies § 385.38 Joint funding. (a) Pursuant to section 10(c) of the Act, MarAd is authorized to participate in joint funded projects with other Federal agencies in any...

  15. 46 CFR 385.38 - Joint funding.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Joint funding. 385.38 Section 385.38 Shipping MARITIME... AGREEMENTS REGULATIONS General Policies § 385.38 Joint funding. (a) Pursuant to section 10(c) of the Act, MarAd is authorized to participate in joint funded projects with other Federal agencies in any...

  16. Effects of joints in truss structures

    NASA Technical Reports Server (NTRS)

    Ikegami, R.

    1988-01-01

    The response of truss-type structures for future space applications, such as Large Deployable Reflector (LDR), will be directly affected by joint performance. Some of the objectives of research at BAC were to characterize structural joints, establish analytical approaches that incorporate joint characteristics, and experimentally establish the validity of the analytical approaches. The test approach to characterize joints for both erectable and deployable-type structures was based upon a Force State Mapping Technique. The approach pictorially shows how the nonlinear joint results can be used for equivalent linear analysis. Testing of the Space Station joints developed at LaRC (a hinged joint at 2 Hz and a clevis joint at 2 Hz) successfully revealed the nonlinear characteristics of the joints. The Space Station joints were effectively linear when loaded to plus or minus 500 pounds with a corresponding displacement of about plus or minus 0.0015 inch. It was indicated that good linear joints exist which are compatible with errected structures, but that difficulty may be encountered if nonlinear-type joints are incorporated in the structure.

  17. 38 CFR 4.66 - Sacroiliac joint.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2012-07-01 2012-07-01 false Sacroiliac joint. 4.66... DISABILITIES Disability Ratings The Musculoskeletal System § 4.66 Sacroiliac joint. The common cause of... in this location are decrease or obliteration of the joint space, with the appearance of...

  18. 38 CFR 4.66 - Sacroiliac joint.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2013-07-01 2013-07-01 false Sacroiliac joint. 4.66... DISABILITIES Disability Ratings The Musculoskeletal System § 4.66 Sacroiliac joint. The common cause of... in this location are decrease or obliteration of the joint space, with the appearance of...

  19. 38 CFR 4.45 - The joints.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2011-07-01 2011-07-01 false The joints. 4.45 Section 4.45 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS SCHEDULE FOR RATING DISABILITIES Disability Ratings The Musculoskeletal System § 4.45 The joints. As regards the joints the factors of disability reside in reductions...

  20. 38 CFR 4.66 - Sacroiliac joint.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2014-07-01 2014-07-01 false Sacroiliac joint. 4.66... DISABILITIES Disability Ratings The Musculoskeletal System § 4.66 Sacroiliac joint. The common cause of... in this location are decrease or obliteration of the joint space, with the appearance of...

  1. 38 CFR 4.66 - Sacroiliac joint.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Sacroiliac joint. 4.66... DISABILITIES Disability Ratings The Musculoskeletal System § 4.66 Sacroiliac joint. The common cause of... in this location are decrease or obliteration of the joint space, with the appearance of...

  2. 77 FR 39560 - International Joint Commission

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-03

    ... International Joint Commission International Joint Commission Invites Public Comment on Upper Great Lakes Report The International Joint Commission (IJC) announced today that it is inviting public comment on the final report of its International Upper Great Lakes Study Board, Lake Superior Regulation:...

  3. 30 CFR 36.24 - Engine joints.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Construction and Design Requirements § 36.24 Engine joints. (a) Cylinder head. The joint between the cylinder head and block of the engine shall be fitted with a metal or metal-clad gasket satisfactory to MSHA... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Engine joints. 36.24 Section 36.24...

  4. 30 CFR 36.24 - Engine joints.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Construction and Design Requirements § 36.24 Engine joints. (a) Cylinder head. The joint between the cylinder head and block of the engine shall be fitted with a metal or metal-clad gasket satisfactory to MSHA... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Engine joints. 36.24 Section 36.24...

  5. 49 CFR 178.338-4 - Joints.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Joints. 178.338-4 Section 178.338-4 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers for Motor Vehicle Transportation § 178.338-4 Joints. (a) All joints in the tank, and in the...

  6. 42 CFR 498.54 - Joint hearings.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 5 2014-10-01 2014-10-01 false Joint hearings. 498.54 Section 498.54 Public Health... PROGRAM Hearings § 498.54 Joint hearings. When two or more affected parties have requested hearings and... joint hearings are held, a single record of the proceedings is made and a separate decision issued...

  7. 14 CFR 297.4 - Joint loading.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Joint loading. 297.4 Section 297.4... REGULATIONS FOREIGN AIR FREIGHT FORWARDERS AND FOREIGN COOPERATIVE SHIPPERS ASSOCIATIONS General § 297.4 Joint loading. Nothing in this part shall preclude joint loading, meaning the pooling of shipments and...

  8. 29 CFR 791.2 - Joint employment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Joint employment. 791.2 Section 791.2 Labor Regulations... INTERPRETATION NOT DIRECTLY RELATED TO REGULATIONS JOINT EMPLOYMENT RELATIONSHIP UNDER FAIR LABOR STANDARDS ACT OF 1938 § 791.2 Joint employment. (a) A single individual may stand in the relation of an employee...

  9. 14 CFR 296.4 - Joint loading.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Joint loading. 296.4 Section 296.4... REGULATIONS INDIRECT AIR TRANSPORTATION OF PROPERTY General § 296.4 Joint loading. Nothing in this part shall preclude joint loading, meaning the pooling of shipments and their delivery to a direct air carrier...

  10. 49 CFR 192.233 - Miter joints.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Miter joints. 192.233 Section 192.233... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192.233 Miter joints. (a) A miter joint on steel pipe to be operated at a pressure that produces a hoop stress of...

  11. 29 CFR 791.2 - Joint employment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 3 2014-07-01 2014-07-01 false Joint employment. 791.2 Section 791.2 Labor Regulations... INTERPRETATION NOT DIRECTLY RELATED TO REGULATIONS JOINT EMPLOYMENT RELATIONSHIP UNDER FAIR LABOR STANDARDS ACT OF 1938 § 791.2 Joint employment. (a) A single individual may stand in the relation of an employee...

  12. 11 CFR 9034.8 - Joint fundraising.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 11 CFR 110.11, a joint fundraising notice shall be included with every solicitation for contributions... CFR 100.5; (B) The allocation formula to be used for distributing joint fundraising proceeds; (C) A... as defined in 11 CFR 110.3 prior to the joint fundraising activity and are not committees of the...

  13. 11 CFR 9034.8 - Joint fundraising.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 11 CFR 110.11, a joint fundraising notice shall be included with every solicitation for contributions... CFR 100.5; (B) The allocation formula to be used for distributing joint fundraising proceeds; (C) A... as defined in 11 CFR 110.3 prior to the joint fundraising activity and are not committees of the...

  14. 42 CFR 498.54 - Joint hearings.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 5 2013-10-01 2013-10-01 false Joint hearings. 498.54 Section 498.54 Public Health... PROGRAM Hearings § 498.54 Joint hearings. When two or more affected parties have requested hearings and... joint hearings are held, a single record of the proceedings is made and a separate decision issued...

  15. 49 CFR 1112.5 - Joint pleadings.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 8 2014-10-01 2014-10-01 false Joint pleadings. 1112.5 Section 1112.5... OF TRANSPORTATION RULES OF PRACTICE MODIFIED PROCEDURES § 1112.5 Joint pleadings. Parties with common interests are encouraged to prepare joint pleadings whenever possible....

  16. 14 CFR 25.693 - Joints.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Joints. 25.693 Section 25.693 Aeronautics... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Control Systems § 25.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion, except those in ball and...

  17. 18 CFR 154.307 - Joint facilities.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Joint facilities. 154... Changes § 154.307 Joint facilities. The Statements required by § 154.312 must show all costs (investment... in the subject rate change and are associated with joint facilities. The methods used in making...

  18. 7 CFR 1956.110 - Joint debtors.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Joint debtors. 1956.110 Section 1956.110 Agriculture... REGULATIONS (CONTINUED) DEBT SETTLEMENT Debt Settlement-Community and Business Programs § 1956.110 Joint debtors. Settlements may not be approved for one joint debtor unless approved for all debtors....

  19. 7 CFR 1400.203 - Joint operations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 10 2014-01-01 2014-01-01 false Joint operations. 1400.203 Section 1400.203... AND SUBSEQUENT CROP, PROGRAM, OR FISCAL YEARS Payment Eligibility § 1400.203 Joint operations. (a) A member of a joint operation will be considered to be actively engaged in farming with respect to...

  20. 49 CFR 178.345-4 - Joints.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Joints. 178.345-4 Section 178.345-4 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers for Motor Vehicle Transportation § 178.345-4 Joints. (a) All joints between the cargo tank...