Science.gov

Sample records for 1st order components

  1. 1st- and 2nd-order motion and texture resolution in central and peripheral vision

    NASA Technical Reports Server (NTRS)

    Solomon, J. A.; Sperling, G.

    1995-01-01

    STIMULI. The 1st-order stimuli are moving sine gratings. The 2nd-order stimuli are fields of static visual texture, whose contrasts are modulated by moving sine gratings. Neither the spatial slant (orientation) nor the direction of motion of these 2nd-order (microbalanced) stimuli can be detected by a Fourier analysis; they are invisible to Reichardt and motion-energy detectors. METHOD. For these dynamic stimuli, when presented both centrally and in an annular window extending from 8 to 10 deg in eccentricity, we measured the highest spatial frequency for which discrimination between +/- 45 deg texture slants and discrimination between opposite directions of motion were each possible. RESULTS. For sufficiently low spatial frequencies, slant and direction can be discriminated in both central and peripheral vision, for both 1st- and for 2nd-order stimuli. For both 1st- and 2nd-order stimuli, at both retinal locations, slant discrimination is possible at higher spatial frequencies than direction discrimination. For both 1st- and 2nd-order stimuli, motion resolution decreases 2-3 times more rapidly with eccentricity than does texture resolution. CONCLUSIONS. (1) 1st- and 2nd-order motion scale similarly with eccentricity. (2) 1st- and 2nd-order texture scale similarly with eccentricity. (3) The central/peripheral resolution fall-off is 2-3 times greater for motion than for texture.

  2. 26. Photograph of original Fresnel lens a 1st order fixed ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. Photograph of original Fresnel lens a 1st order fixed white light. (Installed 1874 and first illuminated Feb. 1, 1875. This is the only known photograph of this lens - - removed in 1929.)ca. 1918. - Block Island Southeast Light, Spring Street & Mohegan Trail at Mohegan Bluffs, New Shoreham, Washington County, RI

  3. Magnetic field induced 1st order transitions: Recent studies, and some new concepts

    NASA Astrophysics Data System (ADS)

    Chaddah, P.

    2015-05-01

    Phase transitions are caused by varying temperature, or pressure, or magnetic field. The observation of 1st order magneto-structural transitions has created application possibilities based on magnetoresistance, magnetocaloric effect, magnetic shape memory effect, and magneto-dielectric effect. Magnetic field induced transitions, and phase coexistence of competing magnetic phases down to the lowest temperature, gained prominence over a decade ago with theoretical models suggesting that the ground state is not homogeneous. Researchers at Indore pushed an alternative view that this phase coexistence could be due to glasslike "kinetic arrest" of a disorder-broadened first-order magnetic transition between two states with long-range magnetic order, resulting in phase coexistence down to the lowest temperatures. The CHUF (cooling and heating in unequal field) protocol created at Indore allows the observation of `devitrification', followed by `melting'. I show examples of measurements establishing kinetic arrest in various materials, emphasizing that glasslike arrest of 1st order magnetic transitions may be as ubiquitous as glass formation following the arrest of 1st order structural transitions.

  4. Euclidean Dynamical Triangulation revisited: is the phase transition really 1st order?

    NASA Astrophysics Data System (ADS)

    Rindlisbacher, Tobias; de Forcrand, Philippe

    2015-05-01

    The transition between the two phases of 4D Euclidean Dynamical Triangulation [1] was long believed to be of second order until in 1996 first order behavior was found for sufficiently large systems [5, 9]. However, one may wonder if this finding was affected by the numerical methods used: to control volume fluctuations, in both studies [5, 9] an artificial harmonic potential was added to the action and in [9] measurements were taken after a fixed number of accepted instead of attempted moves which introduces an additional error. Finally the simulations suffer from strong critical slowing down which may have been underestimated.

  5. Polymer desorption under pulling a 1st - order phase transition without phase coexistence

    NASA Astrophysics Data System (ADS)

    Milchev, A.; Rostiashvili, V. G.; Bhattacharya, S.; Vilgis, T. A.

    2010-02-01

    We show that when a self-avoiding polymer chain is pulled off a sticky surface by force applied to the end segment, it undergoes a first-order thermodynamic phase transition albeit without phase coexistence. This unusual feature is demonstrated analytically by means of a Grand Canonical Ensemble (GCE) description of adsorbed macromolecules as well as by Monte Carlo simulations of an off-lattice bead-spring model of a polymer chain. Theoretical treatment and computer experiment can be carried out both in the constant force statistical ensembl whereby at fixed pulling force f one measures the mean height < h > of the chain end above the adsorbing plane, and in the constant-height ensemble where for a given height h one monitors the resulting force < f > applied at the last segment. We find that the force-assisted desorption undergoes a first-order dichotomic phase transition whereby phase coexistence between adsorbed and desorbed states does not exist. In the f-ensemble the order parameter (the fraction of chain contacts with the surface) is characterized by huge fluctuations when the pulling force attains a critical value fD. In the h-ensemble, in contrast, fluctuations are always finite at the critical height hD. The derived analytical expressions for the probability distributions of the basic structural units of an adsorbed polymer, such as loops, trains and tails, in terms of the adhesive potential and f, or h, provide a full description of the polymer structure and behavior upon force-assisted detachment. In addition, one finds that the hitherto controversial value of the universal critical adsorption exponent ϕ depends essentially on the extent of interaction between the loops adsorbed chain so that ϕ may vary within the limits 0.34 ≤ ϕ ≤ 0.59.

  6. 1st Order Modeling of a SAW Delay Line using MathCAD(Registered)

    NASA Technical Reports Server (NTRS)

    Wilson, William C.; Atkinson, Gary M.

    2007-01-01

    To aid in the development of SAW sensors for Integrated Vehicle Health Monitoring applications, a first order model of a SAW Delay line has been created using MathCadA. The model implements the Impulse Response method to calculate the frequency response, impedance, and insertion loss. This paper presents the model and the results from the model for a SAW delay line design. Integrated Vehicle Health Monitoring (IVHM) of aerospace vehicles requires rugged sensors having reduced volume, mass, and power that can be used to measure a variety of phenomena. Wireless systems are preferred when retro-fitting sensors onto existing vehicles [1]. Surface Acoustic Wave (SAW) devices are capable of sensing: temperature, pressure, strain, chemical species, mass loading, acceleration, and shear stress. SAW technology is low cost, rugged, lightweight, and extremely low power. Passive wireless sensors have been developed using SAW technology. For these reasons new SAW sensors are being investigated for aerospace applications.

  7. Cognitive-based approach in teaching 1st year Physics for Life Sciences, including Atmospheric Physics and Climate Change components

    NASA Astrophysics Data System (ADS)

    Petelina, S. V.

    2009-12-01

    Most 1st year students who take the service course in Physics - Physics for Life Sciences - in Australia encounter numerous problems caused by such factors as no previous experience with this subject; general perception that Physics is hard and only very gifted people are able to understand it; lack of knowledge of elementary mathematics; difficulties encountered by lecturers in teaching university level Physics to a class of nearly 200 students with no prior experience, diverse and sometime disadvantageous backgrounds, different majoring areas, and different learning abilities. As a result, many students either drop, or fail the subject. In addition, many of those who pass develop a huge dislike towards Physics, consider the whole experience as time wasted, and spread this opinion among their peers and friends. The above issues were addressed by introducing numerous changes to the curriculum and modifying strategies and approaches in teaching Physics for Life Sciences. Instead of a conventional approach - teaching Physics from simple to complicated, topic after topic, the students were placed in the world of Physics in the same way as a newborn child is introduced to this world - everything is seen all the time and everywhere. That created a unique environment where a bigger picture and all details were always present and interrelated. Numerous concepts of classical and modern physics were discussed, compared, and interconnected all the time with “Light” being a key component. Our primary field of research is Atmospheric Physics, in particular studying the atmospheric composition and structure using various satellite and ground-based data. With this expertise and also inspired by an increasing importance of training a scientifically educated generation who understands the challenges of the modern society and responsibilities that come with wealth, a new section on environmental physics has been developed. It included atmospheric processes and the greenhouse

  8. A Comparison of In-Channel Dead Zone and Hyporheic Zone Transient Storage Parameter Estimates Between a 1st and 5th Order Stream

    NASA Astrophysics Data System (ADS)

    Briggs, M.; Gooseff, M.; Morkeski, K.; Wollheim, W.; Hopkinson, C.; Peterson, B.; Vorosmarty, C.

    2007-12-01

    A major enhancement to our understanding of how watersheds function would be the ability to discriminate between in-channel dead zone ( DZ) and hyporheic zone ( HZ) transient storage, and an evaluation of how these properties scale across stream orders. The nature of DZ storage is to display faster exchange rates with the main channel and less overall sediment contact time than HZ storage. These differences have great significance to many in-stream processes such as nutrient cycling. The combination of high slope, coarse bed material and fluvial structure endemic to many 1st order streams can provide greater forcing of hyporheic flow paths than occurs within the lower gradient 5th order streams. Conversely many 5th order reaches exhibit large side pool and back eddy DZ areas not common along 1st order streams. This study builds on existing methods to delineate the DZ and HZ from the integrated signal of a conservative solute's breakthrough curve ( BTC). Data for this comparison were collected over the summer of 2007 within the Ipswich River watershed, a basin which drains into Plum Island Sound on the north shore of Massachusetts, USA. The conservative solute NaCl was injected into both a 1st order medium gradient stream and a 5th order low gradient stream. The BTCs collected in thalwegs from the NaCl injections were simulated using a version of the solute transport model OTIS containing two zones of transient storage. Hydrometric measurements of stream velocity were used to estimate average main channel cross sectional area ( A) and DZ cross sectional area ( ASDZ) for each reach to constrain parameter estimates and avoid model equifinality between the storage zones. Initial values for the exchange rate between main channel flow and DZ storage ( αDZ) were estimated from DZ BTCs. Our results indicate that although the overall storage zone is much larger in proportion to the main channel for the 1st order reach than for the 5th order reach, the percentage of median

  9. FOREWORD: 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications/1st International Conference on Fusion Energy Materials Science 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications/1st International Conference on Fusion Energy Materials Science

    NASA Astrophysics Data System (ADS)

    Jacob, Wolfgang; Linsmeier, Christian; Rubel, Marek

    2011-12-01

    The 13th International Workshop on Plasma-Facing Materials and Components (PFMC-13) jointly organized with the 1st International Conference on Fusion Energy Materials Science (FEMaS-1) was held in Rosenheim (Germany) on 9-13 May 2011. PFMC-13 is a successor of the International Workshop on Carbon Materials for Fusion Applications series. Between 1985 and 2003 ten 'Carbon Workshops' were organized in Jülich, Stockholm and Hohenkammer. Then it was time for a change and redefinition of the scope of the symposium to reflect the new requirements of ITER and the ongoing evolution in the field. Under the new name (PFMC-11), the workshop was first organized in 2006 in Greifswald, Germany and PFMC-12 took place in Jülich in 2009. Initially starting in 1985 with about 40 participants as a 1.5 day workshop, the event has continuously grown to about 220 participants at PFMC-12. Due to the joint organization with FEMaS-1, PFMC-13 set a new record with more than 280 participants. The European project Fusion Energy Materials Science, FEMaS, coordinated by the Max-Planck-Institut für Plasmaphysik (IPP), organizes and stimulates cooperative research activities which involve large-scale research facilities as well as other top-level materials characterization laboratories. Five different fields are addressed: benchmarking experiments for radiation damage modelling, the application of micro-mechanical characterization methods, synchrotron and neutron radiation-based techniques and advanced nanoscopic analysis based on transmission electron microscopy. All these fields need to be exploited further by the fusion materials community for timely materials solutions for a DEMO reactor. In order to integrate these materials research fields, FEMaS acted as a co-organizer for the 2011 workshop and successfully introduced a number of participants from research labs and universities into the PFMC community. Plasma-facing materials experience particularly hostile conditions as they are

  10. Nonlinear random motion analysis of coupled heave-pitch motions of a spar platform considering 1st-order and 2nd-order wave loads

    NASA Astrophysics Data System (ADS)

    Liu, Shuxiao; Tang, Yougang; Li, Wei

    2016-06-01

    In this study, we consider first- and second-order random wave loads and the effects of time-varying displacement volume and transient wave elevation to establish motion equations of the Spar platform's coupled heave-pitch. We generated random wave loads based on frequency-domain wave load transfer functions and the Joint North Sea Wave Project (JONSWAP) wave spectrum, designed program codes to solve the motion equations, and then simulated the coupled heave-pitch motion responses of the platform in the time domain. We then calculated and compared the motion responses in different sea conditions and separately investigated the effects of second-order random wave loads and transient wave elevation. The results show that the coupled heave-pitch motion responses of the platform are primarily dominated by wave height and the characteristic wave period, the latter of which has a greater impact. Second-order mean wave loads mainly affect the average heave value. The platform's pitch increases after the second-order low frequency wave loads are taken into account. The platform's heave is underestimated if the transient wave elevation term in the motion equations is neglected.

  11. FOREWORD: 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications/1st International Conference on Fusion Energy Materials Science 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications/1st International Conference on Fusion Energy Materials Science

    NASA Astrophysics Data System (ADS)

    Jacob, Wolfgang; Linsmeier, Christian; Rubel, Marek

    2011-12-01

    The 13th International Workshop on Plasma-Facing Materials and Components (PFMC-13) jointly organized with the 1st International Conference on Fusion Energy Materials Science (FEMaS-1) was held in Rosenheim (Germany) on 9-13 May 2011. PFMC-13 is a successor of the International Workshop on Carbon Materials for Fusion Applications series. Between 1985 and 2003 ten 'Carbon Workshops' were organized in Jülich, Stockholm and Hohenkammer. Then it was time for a change and redefinition of the scope of the symposium to reflect the new requirements of ITER and the ongoing evolution in the field. Under the new name (PFMC-11), the workshop was first organized in 2006 in Greifswald, Germany and PFMC-12 took place in Jülich in 2009. Initially starting in 1985 with about 40 participants as a 1.5 day workshop, the event has continuously grown to about 220 participants at PFMC-12. Due to the joint organization with FEMaS-1, PFMC-13 set a new record with more than 280 participants. The European project Fusion Energy Materials Science, FEMaS, coordinated by the Max-Planck-Institut für Plasmaphysik (IPP), organizes and stimulates cooperative research activities which involve large-scale research facilities as well as other top-level materials characterization laboratories. Five different fields are addressed: benchmarking experiments for radiation damage modelling, the application of micro-mechanical characterization methods, synchrotron and neutron radiation-based techniques and advanced nanoscopic analysis based on transmission electron microscopy. All these fields need to be exploited further by the fusion materials community for timely materials solutions for a DEMO reactor. In order to integrate these materials research fields, FEMaS acted as a co-organizer for the 2011 workshop and successfully introduced a number of participants from research labs and universities into the PFMC community. Plasma-facing materials experience particularly hostile conditions as they are

  12. Reduced order component models for flexible multibody dynamics simulations

    NASA Technical Reports Server (NTRS)

    Tsuha, Walter S.; Spanos, John T.

    1990-01-01

    Many flexible multibody dynamics simulation codes require some form of component description that properly characterizes the dynamic behavior of the system. A model reduction procedure for producing low order component models for flexible multibody simulation is described. Referred to as projection and assembly, the method is a Rayleigh-Ritz approach that uses partitions of the system modal matrix as component Ritz transformation matrices. It is shown that the projection and assembly method yields a reduced system model that preserves a specified set of the full order system modes. Unlike classical component mode synthesis methods, the exactness of the method described is obtained at the expense of having to compute the full order system modes. The paper provides a comprehensive description of the method, a proof of exactness, and numerical results demonstrating the method's effectiveness.

  13. Optimal allocation under partial ordering of lifetimes of components

    NASA Astrophysics Data System (ADS)

    El-Neweihi, Emad; Sethuraman, Jayaram

    1992-08-01

    Assembly of systems to maximize reliability when certain components of the systems can be bolstered in different ways is an important theme in reliability theory. This is done under assumptions of various stochastic orderings among the lifetimes of the components and the spares used to bolster them. The powerful techniques of Schur and AI functions are used in this paper to pinpoint optimal allocation results in different settings involving active and standby redundancy allocation, minimal repair and shock, threshold models.

  14. 62. Neg. No. F75A, Jun 18, 1930, INTERIORWAREHOUSE, 1ST FLOOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    62. Neg. No. F-75A, Jun 18, 1930, INTERIOR-WAREHOUSE, 1ST FLOOR, STORAGE OF AUTOMOBILE COMPONENTS - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA

  15. "Hard Science" for Gifted 1st Graders

    ERIC Educational Resources Information Center

    DeGennaro, April

    2006-01-01

    "Hard Science" is designed to teach 1st grade gifted students accurate and high level science concepts. It is based upon their experience of the world and attempts to build a foundation for continued love and enjoyment of science. "Hard Science" provides field experiences and opportunities for hands-on discovery working beside experts in the field…

  16. The combined use of order tracking techniques for enhanced Fourier analysis of order components

    NASA Astrophysics Data System (ADS)

    Wang, K. S.; Heyns, P. S.

    2011-04-01

    Order tracking is one of the most important vibration analysis techniques for diagnosing faults in rotating machinery. It can be performed in many different ways, each of these with distinct advantages and disadvantages. However, in the end the analyst will often use Fourier analysis to transform the data from a time series to frequency or order spectra. It is therefore surprising that the study of the Fourier analysis of order-tracked systems seems to have been largely ignored in the literature. This paper considers the frequently used Vold-Kalman filter-based order tracking and computed order tracking techniques. The main pros and cons of each technique for Fourier analysis are discussed and the sequential use of Vold-Kalman filtering and computed order tracking is proposed as a novel idea to enhance the results of Fourier analysis for determining the order components. The advantages of the combined use of these order tracking techniques are demonstrated numerically on an SDOF rotor simulation model. Finally, the approach is also demonstrated on experimental data from a real rotating machine.

  17. Lock No. 1 St. Lucie Canal. Sector gates, internal struts ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Lock No. 1- St. Lucie Canal. Sector gates, internal struts- nose beams. - St. Lucie Canal, St. Lucie Lock No. 1, St. Lucie, Cross State Canal, Okeechobee Intracoastal Waterway, Stuart, Martin County, FL

  18. Component architecture in HIS: a drug order entry case study.

    PubMed

    Schlesinger, J M; Blumenfeld, B; Broverman, C

    1997-01-01

    Historically, many healthcare information systems (HIS) have been designed around monolithic architectures that rely upon a single organization to provide most, if not all, of the system's business logic. Recent advances in distributed systems technology and healthcare standards make a component-based architecture feasible in building today's HIS. The First DataBank Drug Toolkit is used as a case study for the role of components in the design of a HIS. Several technical challenges associated with building truly plug and play components are discussed. PMID:10175372

  19. Magnetic measurements with fluxgate 3-components magnetometers in archaeology. Multi-sensor device and associated potential field operators for large scale to centimetre investigations on the 1st millennium BC site of Qasr ʿAllam in the western desert of

    NASA Astrophysics Data System (ADS)

    Gavazzi, Bruno; Alkhatib-Alkontar, Rozan; Munschy, Marc; Colin, Frédéric; Duvette, Catherine

    2016-04-01

    Fluxgate 3-components magnetometers allow vector measurements of the magnetic field. Moreover, they are the magnetometers measuring the intensity of the magnetic field with the lightest weight and the lowest power consumption. Vector measurements make them the only kind of magnetometer allowing compensation of magnetic perturbations due to the equipment carried with the magnetometer. Fluxgate 3-components magnetometers are common in space magnetometry and in aero-geophysics but are never used in archaeology due to the difficulty to calibrate them. This problem is overcome by the use of a simple calibration and compensation procedure on the field developed initially for space research (after calibration and compensation, rms noise is less than 1 nT). It is therefore possible to build a multi-sensor (up to 8) and georeferenced device for investigations at different scales down to the centimetre: because the locus of magnetic measurements is less than a cubic centimetre, magnetic profiling or mapping can be performed a few centimetres outside magnetized bodies. Such an equipment is used in a context of heavy sediment coverage and uneven topography on the 1st millennium BC site of Qasr ʿAllam in the western desert of Egypt. Magnetic measurements with a line spacing of 0.5 m allow to compute a magnetic grid. Interpretation using potential field operators such as double reduction to the pole and fractional vertical derivatives reveals a widespread irrigation system and a vast cultic facility. In some areas, magnetic profiling with a 0.1 m line spacing and at 0.1 m above the ground is performed. Results of interpretations give enough proof to the local authorities to enlarge the protection of the site against the threatening progression of agricultural fields.

  20. Recovering four-component solutions by the inverse transformation of the infinite-order two-component wave functions

    SciTech Connect

    Barysz, Maria; Mentel, Lukasz; Leszczynski, Jerzy

    2009-04-28

    The two-component Hamiltonian of the infinite-order two-component (IOTC) theory is obtained by a unitary block-diagonalizing transformation of the Dirac-Hamiltonian. Once the IOTC spin orbitals are calculated, they can be back transformed into four-component solutions. The transformed four component solutions are then used to evaluate different moments of the electron density distribution. This formally exact method may, however, suffer from certain approximations involved in its numerical implementation. As shown by the present study, with sufficiently large basis set of Gaussian functions, the Dirac values of these moments are fully recovered in spite of using the approximate identity resolution into eigenvectors of the p{sup 2} operator.

  1. ISS Update: 1st Annual ISS R&D Conference

    NASA Video Gallery

    NASA Public Affairs Officer Kelly Humphries talks by phone on Wednesday with Julie Robinson, ISS Program Scientist, about the 1st Annual International Space Station Research and Development Confere...

  2. EMSL Quarterly Highlights Report: 1st Quarter, Fiscal Year 2009

    SciTech Connect

    Showalter, Mary Ann; Kathmann, Loel E.; Manke, Kristin L.

    2009-02-02

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2008 - December 2008) of Fiscal Year 2009.

  3. Electronic Health Records Place 1st at Indy 500

    MedlinePlus

    ... Navigation Bar Home Current Issue Past Issues EHR Electronic Health Records Place 1st at Indy 500 Past ... last May's Indy 500 had thousands of personal Electronic Health Records on hand for those attending—and ...

  4. 1st HPV Test for Use with Preservative Fluid

    MedlinePlus

    ... https://medlineplus.gov/news/fullstory_159789.html 1st HPV Test for Use With Preservative Fluid Human papillomavirus ... Food and Drug Administration has approved Roche's cobas HPV Test -- the first diagnostic to be used with ...

  5. EMSL Quarterly Highlights Report: 1st Quarter, FY08

    SciTech Connect

    Showalter, Mary Ann

    2008-01-28

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2007 - December 2007) of Fiscal Year 2008.

  6. Dewarless Logging Tool - 1st Generation

    SciTech Connect

    HENFLING,JOSEPH A.; NORMANN,RANDY A.

    2000-08-01

    This report focuses on Sandia National Laboratories' effort to create high-temperature logging tools for geothermal applications without the need for heat shielding. One of the mechanisms for failure in conventional downhole tools is temperature. They can only survive a limited number of hours in high temperature environments. For the first time since the evolution of integrated circuits, components are now commercially available that are qualified to 225 C with many continuing to work up to 300 C. These components are primarily based on Silicon-On-Insulator (SOI) technology. Sandia has developed and tested a simple data logger based on this technology that operates up to 300 C with a few limiting components operating to only 250 C without thermal protection. An actual well log to 240 C without shielding is discussed. The first prototype high-temperature tool measures pressure and temperature using a wire-line for power and communication. The tool is based around the HT83C51 microcontroller. A brief discussion of the background and status of the High Temperature Instrumentation program at Sandia, objectives, data logger development, and future project plans are given.

  7. Design and construction of the 1st proton CT scanner

    NASA Astrophysics Data System (ADS)

    Coutrakon, G.; Bashkirov, V.; Hurley, F.; Johnson, R.; Rykalin, V.; Sadrozinski, H.; Schulte, R.

    2013-04-01

    This paper discusses the design and operation of the 1st proton CT scanner for 3D imaging. Reduction of proton range uncertainties and improved dose accuracy in the patient for treatment planning are central goals. A central CT slice acquired by reconstruction of 134 million proton tracks through a 14 cm spherical polystyrene phantom with high and low density inserts is presented.

  8. Regional Observations of North Korea Explosions: 1st and 2nd Tests

    NASA Astrophysics Data System (ADS)

    Chi, Heon Cheol; Shin, Jin Soo; Lee, Hee-Il; Park, Jung Ho; Sheen, Dong-Hoon; Kim, Geunyoung; Kim, Tea Sung; Che, Il-Young; Lim, In-Seub

    2010-05-01

    Through data exchanging with China, Russia and Japan, KIGAM could monitor North Korea explosion tests in near real time with azimuthally full coverage from the test site. Except for the East Sea (Japan Sea) side, the seismic stations are distributed uniformly along the boundaries of North Korea and adjacent countries. The error ellipses of epicentral determination of test site for 1st and 2nd tests showed almost identical pattern if they were separately calculated with the same configuration of stations. But the combined use of the 1st and the 2nd test data showed that the 2nd test site was moved approximately 2 Km westward from 1st site. The Pn/Lg spectral ratio clearly discriminate these events from two nearby natural earthquakes above 4 Hz. Full moment tensor inversion also indicate the 2nd test had a very large isotropic component. But mb-Ms discrimination, which has been considered one of the most reliable discriminants for separating explosions and earthquakes, did not show apparently the known pattern of explosion for both tests. Body wave magnitude, mb(Pn) of the 2nd test, which was evaluated as 4.5 by KIGAM, varies with directional location of stations widely from 4.1 to 5.2. The magnitude obtained from Lg, mb(Lg), showed narrow variation between 4.3 to 4.7 with the average of 4.5. In the case of both 1st and 2nd tests, both mb(Pn) and mb(Lg) showed equivalently large variation with directional station location. These variations are mainly due to lateral variation of crustal structures surrounding the test site. Remarkably mb(Lg) showed very linear relationship with mb(Pn). By considering attenuation characteristics according to the propagation path, the variations could be effectively reduced. The cut-off frequencies of P wave of both tests showed no or negligible difference even though the estimated yield of the 2nd test were much larger than that of the 1st one. The ratio of P-wave amplitudes of two tests showed from 2 to 3.1 times. Correspondingly the

  9. Idaho National Laboratory Quarterly Performance Analysis - 1st Quarter FY2015

    SciTech Connect

    Mitchell, Lisbeth A.

    2015-03-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 73 reportable events (27 from the 1St Qtr FY-15 and 46 from the prior three reporting quarters), as well as 38 other issue reports (including nine not reportable events and Significant Category A and B conditions reported during the1st Qtr FY-15) identified at INL during the past 12 months.

  10. Communication: Explicitly correlated four-component relativistic second-order Møller-Plesset perturbation theory.

    PubMed

    Ten-no, Seiichiro; Yamaki, Daisuke

    2012-10-01

    We propose explicitly correlated Ansatz for four-component relativistic methods within the framework of the no-pair approximation. Kinetically balanced geminal basis is derived to satisfy the cusp conditions in the non-relativistic limit based on the Lévy-Leblend-like equation. Relativistic variants of strong-orthogonality projection operator (Ansätze 2α and 2β) suitable for practical calculations are introduced by exploiting the orthogonal complement of the large-component basis. A pilot implementation is performed for the second order Møller-Plesset perturbation theory. PMID:23039576

  11. Component mode synthesis for model order reduction of nonclassically damped systems

    NASA Technical Reports Server (NTRS)

    Craig, Roy R., Jr.; Ni, Zhenhau

    1989-01-01

    Based on a component mode synthesis approach, a model-order-reduction method for linear structures with arbitrary linear damping has been developed. Projection matrices are introduced to make the method applicable to systems having rigid-body freedom. To test the method, eigenvalues of a reduced-order model of a free-free beam with nonproportional damping were compared to exact eigenvalues and to eigenvalues obtained using two other model-reduction strategies. The present model-reduction strategy proved to be decidedly superior.

  12. [Granuloma Gravidarum in a 37-year-old 1st Gravida, 1st Para--A Case Report].

    PubMed

    Findeklee, S

    2015-10-01

    The granuloma gravidarum is a rare benign tumour with gingival origin. It occurs in circa 0.2% of pregnancies. Mostly we see an asymptomatic course of disease terminated by hormonal changes after delivery. If the granuloma is associated with complaints of the pregnant woman, for example masticational pain or recurrent bleedings, therapeutic options are conservative therapy, surgery or delivery. We report the case of a 37-year-old 1st gravida, 1st para who had an induced delivery in the 39+2 gestational week because of a symptomatic granuloma gravidarum. We saw a spontaneous remission of the granuloma within 3 months post partum. The case report underlines the importance of suitable information for pregnant women about oral hygiene and the necessity of regular dental controls during pregnancy for prophylaxis of granuloma gravidarum. PMID:26402852

  13. Magnetic unmixing of first-order reversal curve diagrams using principal component analysis

    NASA Astrophysics Data System (ADS)

    Lascu, Ioan; Harrison, Richard J.; Li, Yuting; Muraszko, Joy R.; Channell, James E. T.; Piotrowski, Alexander M.; Hodell, David A.

    2015-09-01

    We describe a quantitative magnetic unmixing method based on principal component analysis (PCA) of first-order reversal curve (FORC) diagrams. For PCA, we resample FORC distributions on grids that capture diagnostic signatures of single-domain (SD), pseudosingle-domain (PSD), and multidomain (MD) magnetite, as well as of minerals such as hematite. Individual FORC diagrams are recast as linear combinations of end-member (EM) FORC diagrams, located at user-defined positions in PCA space. The EM selection is guided by constraints derived from physical modeling and imposed by data scatter. We investigate temporal variations of two EMs in bulk North Atlantic sediment cores collected from the Rockall Trough and the Iberian Continental Margin. Sediments from each site contain a mixture of magnetosomes and granulometrically distinct detrital magnetite. We also quantify the spatial variation of three EM components (a coarse silt-sized MD component, a fine silt-sized PSD component, and a mixed clay-sized component containing both SD magnetite and hematite) in surficial sediments along the flow path of the North Atlantic Deep Water (NADW). These samples were separated into granulometric fractions, which helped constrain EM definition. PCA-based unmixing reveals systematic variations in EM relative abundance as a function of distance along NADW flow. Finally, we apply PCA to the combined data set of Rockall Trough and NADW sediments, which can be recast as a four-EM mixture, providing enhanced discrimination between components. Our method forms the foundation of a general solution to the problem of unmixing multicomponent magnetic mixtures, a fundamental task of rock magnetic studies.

  14. The order of importance of component parts of the Biblical worldview in Christian high school students

    NASA Astrophysics Data System (ADS)

    van Meter, Kenneth G.

    This micro-ethnographic study is an exploration of the relative degree of importance of the several components of a worldview as articulated by a purposive sample of fourteen upper division students currently enrolled in advance placement classes in ACSI and WASC accredited Christian high schools in Northern California. The research design uses an original questionnaire followed up with a semi-structured interview of the student using the responses on the questionnaire as a guide for the interview. The questionnaire uses a Likert scale in asking the students to rate the importance of seven components of a worldview and then to rank those same components in order of importance. Results suggest that the subjects of God, morality and truth are of highest importance, and the human predicament and origins are of least importance. The subjects of the purpose of human existence and the resolution to the human predicament were intermediate in importance. Additional themes of temporal immediacy and the ability to connect worldview components into a comprehensive whole were also identified. The influence of the family unit as of primary importance in worldview development was affirmed. Suggestions for strengthening instructional practices and curriculum for Christian school educators are provided.

  15. Pairing and coherence order parameters in a three-component ultracold Fermi gas

    SciTech Connect

    Chung, Chun Kit; Law, C. K.

    2010-09-15

    We investigate the mean-field ground state of a homogeneous three-component attractive Fermi gas at zero temperature. This is achieved by deriving a set of Bogoliubov-de Gennes (BdG) equations of the three-component system, including pairing both order parameters {Delta}{sub ij} and coherence order parameters <{psi}{sub i}{sup {dagger}{psi}}{sub j}> (i{ne}j), where {psi}{sub j} is the field operator for spin level j. Ward-Takahashi identities are obtained to constrain these order parameters. In addition, we present an explicit analytic mean-field solution for symmetric systems and verify that the quasiparticle excitations consist of both gapped and gapless spectra, which correspond to the excitations of paired and unpaired atoms. We further point out that the omission of <{psi}{sub i}{sup {dagger}{psi}}{sub j}> in BdG equations could lead to an overestimation of {Delta}{sub ij} in the strong coupling regime.

  16. Anomalous NMR Relaxation in Cartilage Matrix Components and Native Cartilage: Fractional-Order Models

    PubMed Central

    Magin, Richard L.; Li, Weiguo; Velasco, M. Pilar; Trujillo, Juan; Reiter, David A.; Morgenstern, Ashley; Spencer, Richard G.

    2011-01-01

    We present a fractional-order extension of the Bloch equations to describe anomalous NMR relaxation phenomena (T1 and T2). The model has solutions in the form of Mittag-Leffler and stretched exponential functions that generalize conventional exponential relaxation. Such functions have been shown by others to be useful for describing dielectric and viscoelastic relaxation in complex, heterogeneous materials. Here, we apply these fractional-order T1 and T2 relaxation models to experiments performed at 9.4 and 11.7 Tesla on type I collagen gels, chondroitin sulfate mixtures, and to bovine nasal cartilage (BNC), a largely isotropic and homogeneous form of cartilage. The results show that the fractional-order analysis captures important features of NMR relaxation that are typically described by multi-exponential decay models. We find that the T2 relaxation of BNC can be described in a unique way by a single fractional-order parameter (α), in contrast to the lack of uniqueness of multi-exponential fits in the realistic setting of a finite signal-to-noise ratio. No anomalous behavior of T1 was observed in BNC. In the single-component gels, for T2 measurements, increasing the concentration of the largest components of cartilage matrix, collagen and chondroitin sulfate, results in a decrease in α, reflecting a more restricted aqueous environment. The quality of the curve fits obtained using Mittag-Leffler and stretched exponential functions are in some cases superior to those obtained using mono- and bi-exponential models. In both gels and BNC, α appears to account for microstructural complexity in the setting of an altered distribution of relaxation times. This work suggests the utility of fractional-order models to describe T2 NMR relaxation processes in biological tissues. PMID:21498095

  17. Anomalous NMR relaxation in cartilage matrix components and native cartilage: fractional-order models.

    PubMed

    Magin, Richard L; Li, Weiguo; Pilar Velasco, M; Trujillo, Juan; Reiter, David A; Morgenstern, Ashley; Spencer, Richard G

    2011-06-01

    We present a fractional-order extension of the Bloch equations to describe anomalous NMR relaxation phenomena (T(1) and T(2)). The model has solutions in the form of Mittag-Leffler and stretched exponential functions that generalize conventional exponential relaxation. Such functions have been shown by others to be useful for describing dielectric and viscoelastic relaxation in complex, heterogeneous materials. Here, we apply these fractional-order T(1) and T(2) relaxation models to experiments performed at 9.4 and 11.7 Tesla on type I collagen gels, chondroitin sulfate mixtures, and to bovine nasal cartilage (BNC), a largely isotropic and homogeneous form of cartilage. The results show that the fractional-order analysis captures important features of NMR relaxation that are typically described by multi-exponential decay models. We find that the T(2) relaxation of BNC can be described in a unique way by a single fractional-order parameter (α), in contrast to the lack of uniqueness of multi-exponential fits in the realistic setting of a finite signal-to-noise ratio. No anomalous behavior of T(1) was observed in BNC. In the single-component gels, for T(2) measurements, increasing the concentration of the largest components of cartilage matrix, collagen and chondroitin sulfate, results in a decrease in α, reflecting a more restricted aqueous environment. The quality of the curve fits obtained using Mittag-Leffler and stretched exponential functions are in some cases superior to those obtained using mono- and bi-exponential models. In both gels and BNC, α appears to account for micro-structural complexity in the setting of an altered distribution of relaxation times. This work suggests the utility of fractional-order models to describe T(2) NMR relaxation processes in biological tissues. PMID:21498095

  18. Disorder-Induced Order in Two-Component Bose-Einstein Condensates

    SciTech Connect

    Niederberger, A.; Schulte, T.; Wehr, J.; Lewenstein, M.; Sanchez-Palencia, L.; Sacha, K.

    2008-01-25

    We propose and analyze a general mechanism of disorder-induced order in two-component Bose-Einstein condensates, analogous to corresponding effects established for XY spin models. We show that a random Raman coupling induces a relative phase of {pi}/2 between the two BECs and that the effect is robust. We demonstrate it in one, two, and three dimensions at T=0 and present evidence that it persists at small T>0. Applications to phase control in ultracold spinor condensates are discussed.

  19. Unmixing Multi-Component Magnetic Mixtures in Geologic Materials Using First Order Reversal Curve Diagrams

    NASA Astrophysics Data System (ADS)

    Lascu, I.; Harrison, R. J.; Li, Y.; Muraszko, J.; Channell, J. E. T.; Piotrowski, A. M.; Hodell, D. A.; Necula, C.; Panaiotu, C. G.

    2015-12-01

    We have developed a magnetic unmixing method based on principal component analysis (PCA) of first-order reversal curve (FORC) diagrams. PCA provides an objective and robust statistical framework for unmixing, because it represents data variability as a linear combination of a limited number of principal components that are derived purely on the basis of natural variations contained within the dataset. For PCA we have resampled FORC distributions on grids that capture diagnostic signatures of magnetic domain states. Individual FORC diagrams were then recast as linear combinations of end-member (EM) FORC diagrams, located at user-defined positions in PCA space. The EM selection is guided by constraints derived from physical modeling, and is imposed by data scatter. To test our model, we have investigated temporal variations of two EMs in bulk North Atlantic sediment cores collected from the Rockall Trough and the Iberian Continental Margin. Sediments from these sites contain a mixture of magnetosomes and granulometrically distinct detrital magnetite. We have also quantified the spatial variation of three EM components in surficial sediments along the flow path of the North Atlantic Deep Water (NADW). These samples were separated into granulometric fractions, which also assisted in constraining EM definition. The unmixing model reveals systematic variations in EM relative abundance as a function of distance along NADW flow. Finally, we have applied PCA to the combined dataset of Rockall Trough and NADW sediments, which can be recast as a four-EM mixture, providing enhanced discrimination between components. Our method forms the foundation of a general solution to the problem of unmixing multi-component magnetic mixtures, a fundamental task of rock magnetic studies.

  20. ["1st Therapeutic Red Cross Hospital" during the civil war].

    PubMed

    Simonenko, V B; Abashin, V G

    2014-04-01

    The article presents the documentary information about the founding, the establishment and early years of the 1st Therapeutic Red Cross Hospital - in the future - Mandryka Central Military Clinical Hospital of the Ministry of Defence of the Russian Federation. Presented the work of the Hospital during the dificult period of the Civil War, typhus epidemic, famine and devastation. Specified its staffing structure, command, medical and administrative staff, travel and accommodation till the moment of the deployment in the Silver Lane in Moscow. PMID:25051792

  1. The 1st All-Russian Workshop on Archaeoastronomy

    NASA Astrophysics Data System (ADS)

    Bochkarev, Nikolai G.

    2007-08-01

    The 1st All-Russia Workshop on Archaeoastronomy “Astronomical and World-Outlook Meaning of the Archaeological Monuments of South Ural” was held on June 19-25, 2006, at the ground of the archaeological center “Arkaim” (Chelyabinsk Region). Besides about 30 talks, astronomical measurements were performed at two archaeological objects under intensive study: Arkaim Site (Bronze Epoch, XVIII-XVI c. B.C.) and tumuli “with whiskers” complex Kondurovsky (V-VIII c. A.D.). The promising character of the megalithic complex on the Vera Island (Lake Turgoyak) was stated.

  2. Magnetic unmixing of first-order reversal curve diagrams using principal component analysis

    NASA Astrophysics Data System (ADS)

    Lascu, Ioan; Harrison, Richard; Li, Yuting; Piotrowski, Alexander; Channell, James; Muraszko, Joy; Hodell, David

    2015-04-01

    We have developed a magnetic unmixing method based on principal component analysis (PCA) of entire first-order reversal curve (FORC) diagrams. FORC diagrams are an advanced hysteresis technique that allows the quantitative characterisation of magnetic grain size, domain state, coercivity and spatial distribution of ensembles of particles within a sample. PCA has been previously applied on extracted central ridges from FORC diagrams of sediment samples containing single domain (SD) magnetite produced by magnetotactic bacteria (Heslop et al., 2014). We extend this methodology to the entire FORC space, which incorporates additional SD signatures, pseudo-single domain (PSD) and multi domain (MD) magnetite signatures, as well as fingerprints of other minerals, such as hematite (HEM). We apply the PCA by resampling the FORC distribution on a regular grid designed to encompass all significant features. Typically 80-90% of the variability within the FORC dataset is described by one or two principal components. Individual FORCs are recast as linear combinations of physically distinct end-member FORCs defined using the principal components and constraints derived from physical modelling. In a first case study we quantify the spatial variation of end-member components in surficial sediments along the North Atlantic Deep Water (NADW) from Iceland to Newfoundland. The samples have been physically separated into granulometric fractions, which added a further constraint in determining three end members used to model the magnetic ensemble, namely a coarse silt-sized MD component, a fine silt-sized PSD component, and a mixed clay-sized component containing both SD magnetite and hematite (SD+HEM). Sediments from core tops proximal to Iceland are dominated by the SD+HEM component, whereas those closer to Greenland and Canada are increasingly dominated by MD grains. Iceland sediments follow a PSD to SD+HEM trend with increasing grain-size fraction, whereas the Greenland and North

  3. Mott Transitions and Staggered Orders in the Three-Component Fermionic System: Variational Cluster Approach

    NASA Astrophysics Data System (ADS)

    Hasunuma, Takumi; Kaneko, Tatsuya; Miyakoshi, Shohei; Ohta, Yukinori

    2016-07-01

    The variational cluster approximation is used to study the ground-state properties and single-particle spectra of the three-component fermionic Hubbard model defined on the two-dimensional square lattice at half filling. First, we show that either a paired Mott state or color-selective Mott state is realized in the paramagnetic system, depending on the anisotropy in the interaction strengths, except around the SU(3) symmetric point, where a paramagnetic metallic state is maintained. Then, by introducing Weiss fields to observe spontaneous symmetry breakings, we show that either a color-density-wave state or color-selective antiferromagnetic state is realized depending on the interaction anisotropy and that the first-order phase transition between these two states occurs at the SU(3) point. We moreover show that these staggered orders originate from the gain in potential energy (or Slater mechanism) near the SU(3) point but originate from the gain in kinetic energy (or Mott mechanism) when the interaction anisotropy is strong. The staggered orders near the SU(3) point disappear when the next-nearest-neighbor hopping parameters are introduced, indicating that these orders are fragile, protected only by the Fermi surface nesting.

  4. 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop

    SciTech Connect

    none,

    2011-10-01

    The U.S. marine energy industry is actively pursuing development of offshore wind and marine hydrokinetic (MHK) energy systems. Experience in the wind energy sector demonstrates that new technology development requires thorough measurement and characterization of the environmental conditions prevalent at installation sites and of technology operating in the field. Presently, there are no turn-key instrumentation system solutions that meet the measurement needs of the marine energy industry. The 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop brought together technical experts from government laboratories, academia, and industry representatives from marine energy, wind, offshore oil and gas, and instrumentation developers to present and discuss the instrumentation needs of the marine energy industry. The goals of the meeting were to: 1. Share the latest relevant knowledge among technical experts; 2. Review relevant state-of-the-art field measurement technologies and methods; 3. Review lessons learned from recent field deployments; 4. Identify synergies across different industries; 5. Identify gaps between existing and needed instrumentation capabilities; 6. Understand who are the leading experts; 7. Provide a forum where stakeholders from the marine energy industry could provide substantive input in the development of new marine energy field deployable instrumentation packages.

  5. THEOS: The1st Thailand EO System and

    NASA Astrophysics Data System (ADS)

    Peanvijarnpong, Chanchai

    Thailand has engaged in remote sensing satellite technological and scientific development many years since early 1980s. Thailand Landsat Station was established as a regional center of data processing and dissemination for Thai scientists for data applications. Over the years, GISTDA and Thai user community have been gaining technical experience and expertise in satellite data applications around the country such natural resources and environmental management, forest inventory, forest change detections, soil mapping, land-use and land cover mapping, crop type mapping, coastal shrimp farming, flood zone mapping, base mapping, water and drought management. The Government of Thailand realizes that remote sensing satellite technology is an important mechanism for social and economic development of the country. So the 1st Thailand Earth Observation System (THEOS) development program was approved by the Government since 2003. THEOS system is sub-synchronous satellite orbiting around the earth at 822 km. altitude same as SPOT satellites. It carries two imaging instruments; 2-m Panchromatic telescope with 22 km. swath width and 15-m resolution camera with four-multi-spectral band and 90-km swath wide. THEOS is scheduled to launch around March 2008. A number of technological and scientific activities has been implementing for Thailand and international scientific user community. Therefore THEOS is strong endorsement from the Government of Thailand on the value of remote sensing technology. This paper presents Thailand EO activities including THEOS System and its plans.

  6. Antiferromagnetic Ordering in the Single-Component Molecular Conductor [Pd(tmdt)2].

    PubMed

    Ogura, Satomi; Idobata, Yuki; Zhou, Biao; Kobayashi, Akiko; Takagi, Rina; Miyagawa, Kazuya; Kanoda, Kazushi; Kasai, Hidetaka; Nishibori, Eiji; Satoko, Chikatoshi; Delley, Bernard

    2016-08-01

    Crystals of [Pd(tmdt)2] (tmdt = trimethylenetetrathiafulvalenedithiolate) were prepared in order to investigate their physical properties. The electrical resistivity of [Pd(tmdt)2] was measured on single crystals using two-probe methods and showed that the room-temperature conductivity was 100 S·cm(-1). The resistivity behaviors implied that [Pd(tmdt)2] was a semimetal at approximately room temperature and became narrow-gap semiconducting as the temperature was decreased to the lowest temperature. X-ray structural studies on small single crystals of [Pd(tmdt)2] at temperatures of 20-300 K performed using synchrotron radiation at SPring-8 showed no distinct structural change over this temperature region. However, small anomalies were observed at approximately 100 K. Electron spin resonance (ESR) spectra were measured over the temperature range of 2.7-301 K. The ESR intensity increased as the temperature decreased to 100 K and then decreased linearly as the temperature was further decreased to 50 K, where an abrupt decrease in the intensity was observed. To investigate the magnetic state, (1)H nuclear magnetic resonance (NMR) measurements were performed in the temperature range of 2.5-271 K, revealing broadening below 100 K. The NMR relaxation rate gradually increased below 100 K and formed a broad peak at approximately 50 K, followed by a gradual decrease down to the lowest temperature. These results suggest that most of the sample undergoes the antiferromagnetic transition at approximately 50 K with the magnetic ordering temperatures distributed over a wide range up to 100 K. These electric and magnetic properties of [Pd(tmdt)2] are quite different from those of the single-component molecular (semi)metals [Ni(tmdt)2] and [Pt(tmdt)2], which retain their stable metallic states down to extremely low temperatures. The experimental results and the band structure calculations at the density functional theory level showed that [Pd(tmdt)2] may be an antiferromagnetic Mott

  7. VIEW WEST, 1ST FLOOR, EAST ROOM, HYDRAULIC COTTON PRESS, DETAIL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW WEST, 1ST FLOOR, EAST ROOM, HYDRAULIC COTTON PRESS, DETAIL, CONTINENTAL GIN COMPANY HYDRAULIC TANK - Magnolia Plantation, Cotton Gins & Presses, LA Route 119, Natchitoches, Natchitoches Parish, LA

  8. 94. DETAIL, SAME BEAN AS ABOVE, MARKED 'PATENTED DEC. 1ST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    94. DETAIL, SAME BEAN AS ABOVE, MARKED 'PATENTED DEC. 1ST 1857' - Smithsonian Institution Building, 1000 Jefferson Drive, between Ninth & Twelfth Streets, Southwest, Washington, District of Columbia, DC

  9. 1st paleomagnetic investigation of Nubia Sandstone at Kalabsha, south Western Desert of Egypt

    NASA Astrophysics Data System (ADS)

    Mostafa, R.; Khashaba, A.; El-Hemaly, I. A.; Takla, E. M.; Abdel Aal, E.; Odah, H.

    2016-06-01

    Two profiles have been sampled from the Nubia Sandstone at Aswan, south Western Desert: the 1st profile has been taken from Abu Aggag Formation and the 2nd one was from Sabaya Formation (23.25 °N, 32.75 °E). 136 oriented cores (from 9 sites) have been sampled. Abu Aggag Formation is of Late Cretaceous (Turonian) and Sabaya Formation is of early Cretaceous (Albian-Cenomanian). The studied rocks are subjected to rock magnetic measurements as well as demagnetization treatment. It has been found that hematite is the main magnetic mineral in both formations. Four profile sections from Abu Aggag Formation, yielded a magnetic component with D = 352.7°, I = 36.6° with α95 = 5.2° and the corresponding pole lies at Lat. = 82.8 °N and Long. = 283.1 °E. Five profile sections from Sabaya Formation, yielded a magnetic component with D = 348.6°, I = 33.3° with α95 = 5.8° and the corresponding pole lies at Lat. = 78.3 °N and Long. = 280.4 °E. The obtained paleopole for the two formations lies at Lat. = 80.5 °N and Long. = 281.7 °E. The obtaind magnetic components are considered primary and the corresponding paleopole reflects the age of Nubia Sandstone when compared with the previously obtained Cretaceous poles for Egypt.

  10. Novel Framework for Reduced Order Modeling of Aero-engine Components

    NASA Astrophysics Data System (ADS)

    Safi, Ali

    The present study focuses on the popular dynamic reduction methods used in design of complex assemblies (millions of Degrees of Freedom) where numerous iterations are involved to achieve the final design. Aerospace manufacturers such as Rolls Royce and Pratt & Whitney are actively seeking techniques that reduce computational time while maintaining accuracy of the models. This involves modal analysis of components with complex geometries to determine the dynamic behavior due to non-linearity and complicated loading conditions. In such a case the sub-structuring and dynamic reduction techniques prove to be an efficient tool to reduce design cycle time. The components whose designs are finalized can be dynamically reduced to mass and stiffness matrices at the boundary nodes in the assembly. These matrices conserve the dynamics of the component in the assembly, and thus avoid repeated calculations during the analysis runs for design modification of other components. This thesis presents a novel framework in terms of modeling and meshing of any complex structure, in this case an aero-engine casing. In this study the affect of meshing techniques on the run time are highlighted. The modal analysis is carried out using an extremely fine mesh to ensure all minor details in the structure are captured correctly in the Finite Element (FE) model. This is used as the reference model, to compare against the results of the reduced model. The study also shows the conditions/criteria under which dynamic reduction can be implemented effectively, proving the accuracy of Criag-Bampton (C.B.) method and limitations of Static Condensation. The study highlights the longer runtime needed to produce the reduced matrices of components compared to the overall runtime of the complete unreduced model. Although once the components are reduced, the assembly run is significantly. Hence the decision to use Component Mode Synthesis (CMS) is to be taken judiciously considering the number of

  11. Kindergarten to 1st Grade: Classroom Characteristics and the Stability and Change of Children's Classroom Experiences

    ERIC Educational Resources Information Center

    La Paro, Karen M.; Rimm-Kaufman, Sara E.; Pianta, Robert C.

    2006-01-01

    This study examines the classroom experiences of 192 children followed longitudinally from kindergarten to 1st grade. Time-sampled observations of children were conducted to compare learning formats, teaching activities, and children's engagement in activities between kindergarten and 1st grade. Classroom observations also were conducted to…

  12. Proceedings of the 1st Puerto Rico Biobanking Workshop

    PubMed Central

    Mora, Edna; Robb, James A.; Stefanoff, Gustavo; Mellado, Robert Hunter; Coppola, Domenico; Muñoz-Antonia, Teresita; Flores, Idhaliz

    2015-01-01

    The 1st Puerto Rico Biobanking Workshop took place on August 20th, 2014 in the Auditorium of the Comprehensive Cancer Center of the University of Puerto Rico, Medical Sciences Campus in San Juan Puerto Rico. The program for this 1-day, live workshop included lectures by three biobanking experts, followed by presentations from existing biobanks in Puerto Rico and audience discussion. The need for increasing biobanking expertise in Puerto Rico stems from the fact that Hispanics in general are underrepresented in the biobanks in existence in the US, which limits the research conducted specifically to understand the molecular differences in cancer cells compared to other better studied populations. In turn, this lack of information impairs the development of better diagnostic and therapeutic approaches for our population. Dr. James Robb, M.D., F.C.A.P., consulting pathologist to the National Cancer Institute (NCI) and the Office of Biorepositories and Biospecimen Research (OBBR), opened the workshop with a discussion on the basic aspects of the science of biobanking (e.g., what is a biobank; its goals and objectives; protocols and procedures) in his talk addressing the importance of banking tissues for advancing biomedical research. Next, Dr. Gustavo Stefanoff, from the Cancer Institutes Network of Latin America (RINC by its name in Spanish), explained the mission, objectives, and structure of the Network of Latin-American and Caribbean Biobanks (REBLAC by its name in Spanish), which despite limited resources and many challenges, currently accrue high quality human tissue specimens and data to support cancer research in the region. Dr. Robert Hunter-Mellado, Professor of Internal Medicine, Universidad Central del Caribe, followed with an examination of the ethical and regulatory aspects of biobanking tissues for future research, including informed consent of subjects; protection of human subjects rights; and balancing risks and benefit ratios. In the afternoon, the

  13. Proceedings of the 1st Puerto Rico Biobanking Workshop.

    PubMed

    Mora, Edna; Robb, James A; Stefanoff, Gustavo; Mellado, Robert Hunter; Coppola, Domenico; Muñoz-Antonia, Teresita; Flores, Idhaliz

    2014-01-01

    The 1st Puerto Rico Biobanking Workshop took place on August 20st, 2014 in the Auditorium of the Comprehensive Cancer Center of the University of Puerto Rico, Medical Sciences Campus in San Juan Puerto Rico. The program for this 1-day, live workshop included lectures by three biobanking experts, followed by presentations from existing biobanks in Puerto Rico and audience discussion. The need for increasing biobanking expertise in Puerto Rico stems from the fact that Hispanics in general are underrepresented in the biobanks in existence in the US, which limits the research conducted specifically to understand the molecular differences in cancer cells compared to other better studied populations. In turn, this lack of information impairs the development of better diagnostic and therapeutic approaches for our population. Dr. James Robb, M.D., F.C.A.P., consulting pathologist to the National Cancer Institute (NCI) and the Office of Biorepositories and Biospecimen Research (OBBR), opened the workshop with a discussion on the basic aspects of the science of biobanking (e.g., what is a biobank; its goals and objectives; protocols and procedures) in his talk addressing the importance of banking tissues for advancing biomedical research. Next, Dr. Gustavo Stefanoff, from the Cancer Institutes Network of Latin America (RINC by its name in Spanish), explained the mission, objectives, and structure of the Network of Latin-American and Caribbean Biobanks (REBLAC by its name in Spanish), which despite limited resources and many challenges, currently accrue high quality human tissue specimens and data to support cancer research in the region. Dr. Robert Hunter-Mellado, Professor of Internal Medicine, Universidad Central del Caribe, followed with an examination of the ethical and regulatory aspects of biobanking tissues for future research, including informed consent of subjects; protection of human subjects rights; and balancing risks and benefit ratios. In the afternoon, the

  14. Encoding order and developmental dyslexia: a family of skills predicting different orthographic components.

    PubMed

    Romani, Cristina; Tsouknida, Effie; Olson, Andrew

    2015-01-01

    We investigated order encoding in developmental dyslexia using a task that presented nonalphanumeric visual characters either simultaneously or sequentially--to tap spatial and temporal order encoding, respectively--and asked participants to reproduce their order. Dyslexic participants performed poorly in the sequential condition, but normally in the simultaneous condition, except for positions most susceptible to interference. These results are novel in demonstrating a selective difficulty with temporal order encoding in a dyslexic group. We also tested the associations between our order reconstruction tasks and: (a) lexical learning and phonological tasks; and (b) different reading and spelling tasks. Correlations were extensive when the whole group of participants was considered together. When dyslexics and controls were considered separately, different patterns of association emerged between orthographic tasks on the one side and tasks tapping order encoding, phonological processing, and written learning on the other. These results indicate that different skills support different aspects of orthographic processing and are impaired to different degrees in individuals with dyslexia. Therefore, developmental dyslexia is not caused by a single impairment, but by a family of deficits loosely related to difficulties with order. Understanding the contribution of these different deficits will be crucial to deepen our understanding of this disorder. PMID:25246235

  15. Encoding order and developmental dyslexia: A family of skills predicting different orthographic components

    PubMed Central

    Romani, Cristina; Tsouknida, Effie; Olson, Andrew

    2015-01-01

    We investigated order encoding in developmental dyslexia using a task that presented nonalphanumeric visual characters either simultaneously or sequentially—to tap spatial and temporal order encoding, respectively—and asked participants to reproduce their order. Dyslexic participants performed poorly in the sequential condition, but normally in the simultaneous condition, except for positions most susceptible to interference. These results are novel in demonstrating a selective difficulty with temporal order encoding in a dyslexic group. We also tested the associations between our order reconstruction tasks and: (a) lexical learning and phonological tasks; and (b) different reading and spelling tasks. Correlations were extensive when the whole group of participants was considered together. When dyslexics and controls were considered separately, different patterns of association emerged between orthographic tasks on the one side and tasks tapping order encoding, phonological processing, and written learning on the other. These results indicate that different skills support different aspects of orthographic processing and are impaired to different degrees in individuals with dyslexia. Therefore, developmental dyslexia is not caused by a single impairment, but by a family of deficits loosely related to difficulties with order. Understanding the contribution of these different deficits will be crucial to deepen our understanding of this disorder. PMID:25246235

  16. Product Evaluation of the Counseling and Career Guidance Component of the Detroit Desegregation Court Order.

    ERIC Educational Resources Information Center

    Fisher, Arnold

    The goal of the Counseling and Career Guidance Component of the Detroit (Michigan) school desegregation plan was to improve student effectiveness in the areas of personal, social, academic, and career development. Major program functions included individual and group counseling, program selection and placement guidance, career guidance, and…

  17. The Order of Importance of Component Parts of the Biblical Worldview in Christian High School Students

    ERIC Educational Resources Information Center

    Van Meter, Kenneth G.

    2009-01-01

    This micro-ethnographic study is an exploration of the relative degree of importance of the several components of a worldview as articulated by a purposive sample of fourteen upper division students currently enrolled in advance placement classes in ACSI and WASC accredited Christian high schools in Northern California. The research design uses an…

  18. Analgesic Effects of 1st Generation Anti-histamines in Mice.

    PubMed

    Takahashi, Mebae; Shima, Kazuhiro; Tsuchiya, Masahiro; Hagiwara, Yoshihiro; Mizoguchi, Hirokazu; Sakurada, Shinobu; Sugawara, Shunji; Fujita, Takuo; Tadano, Takeshi; Watanabe, Makoto; Fukumoto, Satoshi; Endo, Yasuo

    2016-01-01

    Pain is sensed, transmitted, and modified by a variety of mediators and receptors. Histamine is a well-known mediator of pain. In addition to their anti-histaminic effects, the classical, or 1st generation, anti-histamines (1st AHs) possess, to various degrees, anti-muscarinic, anti-serotonergic, anti-adrenergic, and other pharmacologic effects. Although there have been attempts to use 1st AHs as analgesics and/or analgesic adjuvants, the advent of non-steroidal anti-inflammatory drugs (NSAIDs) discouraged such trials. We previously reported that in patients with temporomandibular disorders, osteoporosis, and/or osteoarthritis, the analgesic effects of certain 1st AHs (chlorpheniramine and diphenhydramine) are superior to those of the NSAIDs flurbiprofen and indomethacin. Here, we compared analgesic effects among 1st AHs and NSAIDs against responses shown by mice to intraperitoneally injected 0.7% acetic acid. Since 1st AHs are water soluble, we selected water-soluble NSAIDs. For direct comparison, drugs were intravenously injected 30 min before the above tests. Histamine-H1-receptor-deficient (H1R-KO) mice were used for evaluating H1-receptor-independent effects. The tested 1st AHs (especially cyproheptadine) displayed or tended to display analgesic effects comparable to those of NSAIDs in normal and H1R-KO mice. Our data suggest that the anti-serotonergic and/or anti-adrenergic effects of 1st AHs make important contributions to their analgesic effects. Moreover, combination of a 1st AH with an NSAID (cyclooxygenase-1 inhibitor) produced remarkably potent analgesic effects. We propose that a 1st AH, by itself or in combination with a cyclooxygenase-1 inhibitor, should undergo testing to evaluate its usefulness in analgesia. PMID:27040636

  19. The Effect of Foot Structure on 1st Metatarsophalangeal Joint Flexibility and Hallucal Loading

    PubMed Central

    Rao, Smita; Song, Jinsup; Kraszewski, Andrew; Backus, Sherry; Ellis, Scott J.; Deland, Jonathan T.; Hillstrom, Howard J.

    2011-01-01

    The purpose of our study was to examine 1st metatarsophalangeal (MTP) joint motion and flexibility and plantar loads in individuals with high, normal and low arch foot structure. Asymptomatic individuals (n=61), with high, normal and low arches participated in this study. Foot structure was quantified using malleolar valgus index (MVI) and arch height index (AHI). First MTP joint flexibility was measured using a specially constructed jig. Peak pressure under the hallux, 1st and 2nd metatarsals during walking was assessed using a pedobarograph. A one-way ANOVA with Bonferroni-adjusted post-hoc comparisons was used to assess between-group differences in MVI, AHI, Early and Late 1st MTP joint flexibility in sitting and standing, peak dorsiflexion (DF), and peak pressure under the hallux, 1st and 2nd metatarsals. Stepwise linear regression was used to identify predictors of hallucal loading. Significant between-group differences were found in MVI (F2,56=15.4, p<0.01), 1st MTP late flexibility in sitting (F2,57=3.7, p=0.03), and standing (F2,57=3.7, p=0.03). Post-hoc comparisons demonstrated that 1st MTP late flexibility in sitting was significantly higher in individuals with low arch compared to high arch structure, and that 1st MTP late flexibility in standing was significantly higher in individuals with low arch compared to normal arch structure. Stepwise regression analysis indicated that MVI and 1st MTP joint early flexibility in sitting explain about 20% of the variance in hallucal peak pressure. Our results provide objective evidence indicating that individuals with low arches show increased 1st MTP joint late flexibility compared to individuals with normal arch structure, and that hindfoot alignment and 1st MTP joint flexibility affect hallucal loading. PMID:21536440

  20. 78 FR 40506 - Certain Toner Cartridges and Components Thereof; Issuance of General Exclusion Order and Cease...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-05

    ... 23, 2012. 77 FR 11586 (Feb. 27, 2012). The complaint alleged violations of section 337 of the Tariff..., Tennessee; and Zinyaw LLC (d/b/a TonerPirate.com ) of Houston, Texas. Order No. 14 (nonreviewed October...

  1. Macroscopic lithotype characterisation of the 1st Middle-Polish (1st Lusatian) Lignite Seam in the Miocene of central Poland

    NASA Astrophysics Data System (ADS)

    Widera, Marek

    2012-03-01

    The 1st Middle-Polish (1st Lusatian) Lignite Seam is exploited in open-cast mines in central Poland. A large number of lignite lithotypes, grouped in four lithotype associations, are distinguished: xylitic, detritic, xylo-detritic and detro-xylitic lithotype associations, which show various structures. Each lithotype association was produced under specific peat-forming environmental conditions. In the case of the lignite seams under study they represent all the main environments that are known from Neogene mires, i.e.: fen or open water, bush moor, wet forest swamp and dry forest swamp. For a simple and practical description in the field of both the lignite sections and borehole cores, a new codification for lignite lithotypes is proposed. It is based on the codification of clastic deposits (lithofacies). The practical value of the new lignite lithotype codification is examined in three vertical sections of the 1st Middle-Polish Lignite Seam.

  2. Exploring Mathematical Reasoning of the Order of Operations: Rearranging the Procedural Component PEMDAS

    ERIC Educational Resources Information Center

    Lee, Jae Ki; Licwinko, Susan; Taylor-Buckner, Nicole

    2013-01-01

    PEMDAS is a mnemonic device to memorize the order in which to calculate an expression that contains more than one operation. However, students frequently make calculation errors with expressions, which have either multiplication and division or addition and subtraction next to each other. This article explores the mathematical reasoning of the…

  3. A new constrained fixed-point algorithm for ordering independent components

    NASA Astrophysics Data System (ADS)

    Zhang, Hongjuan; Guo, Chonghui; Shi, Zhenwei; Feng, Enmin

    2008-10-01

    Independent component analysis (ICA) aims to recover a set of unknown mutually independent components (ICs) from their observed mixtures without knowledge of the mixing coefficients. In the classical ICA model there exists ICs' indeterminacy on permutation and dilation. Constrained ICA is one of methods for solving this problem through introducing constraints into the classical ICA model. In this paper we first present a new constrained ICA model which composed of three parts: a maximum likelihood criterion as an objective function, statistical measures as inequality constraints and the normalization of demixing matrix as equality constraints. Next, we incorporate the new fixed-point (newFP) algorithm into this constrained ICA model to construct a new constrained fixed-point algorithm. Computation simulations on synthesized signals and speech signals demonstrate that this combination both can eliminate ICs' indeterminacy to a certain extent, and can provide better performance. Moreover, comparison results with the existing algorithm verify the efficiency of our new algorithm furthermore, and show that it is more simple to implement than the existing algorithm due to its advantage of not using the learning rate. Finally, this new algorithm is also applied for the real-world fetal ECG data, experiment results further indicate the efficiency of the new constrained fixed-point algorithm.

  4. Angular fluctuations of a multi-component order describe the pseudogap regime of the cuprate superconductors

    NASA Astrophysics Data System (ADS)

    Sachdev, Subir

    2014-03-01

    The hole-doped cuprate high temperature superconductors enter the pseudogap regime as their superconducting critical temperature, Tc, falls with decreasing hole density. Experiments have probed this regime for over two decades, but we argue that decisive new information has emerged from recent X-ray scattering experiments. The experiments observe incommensurate charge density wave fluctuations whose strength rises gradually over a wide temperature range above Tc, but then decreases as the temperature is lowered below Tc. We propose a theory in which the superconducting and charge-density wave orders exhibit angular fluctuations in a 6-dimensional space. The theory provides a natural quantitative fit to the X-ray data, and is consistent with other observed characteristics of the pseudogap. Results will also be presented on the microscopic origins of these order parameters. Work in collaboration with Lauren Hayward, Roger Melko, David Hawthorn, and Jay Sau.

  5. Conversion of Component-Based Point Definition to VSP Model and Higher Order Meshing

    NASA Technical Reports Server (NTRS)

    Ordaz, Irian

    2011-01-01

    Vehicle Sketch Pad (VSP) has become a powerful conceptual and parametric geometry tool with numerous export capabilities for third-party analysis codes as well as robust surface meshing capabilities for computational fluid dynamics (CFD) analysis. However, a capability gap currently exists for reconstructing a fully parametric VSP model of a geometry generated by third-party software. A computer code called GEO2VSP has been developed to close this gap and to allow the integration of VSP into a closed-loop geometry design process with other third-party design tools. Furthermore, the automated CFD surface meshing capability of VSP are demonstrated for component-based point definition geometries in a conceptual analysis and design framework.

  6. PROPAGATION AND EVOLUTION OF THE JUNE 1st 2008 CME IN THE INTERPLANETARY MEDIUM

    NASA Astrophysics Data System (ADS)

    Nieves-Chinchilla, T.; Lamb, D. A.; Davila, J. M.; Vinas, A. F.; Moestl, C.; Hidalgo, M. A.; Farrugia, C. J.; Malandraki, O.; Dresing, N.; Gómez-Herrero, R.

    2009-12-01

    In this work we present a study of the coronal mass ejection (CME) of June 1st of 2008 in the interplanetary medium. This event has been extensively studied by others because of its favorable geometry and the possible consequences of its peculiar initiation for space weather forecasting. We show an analysis of the evolution of the CME in the interplanetary medium in order to shed some light on the propagation mechanism of the ICME. We have determined the typical shock associated characteristics of the ICME in order to understand the propagation properties. Using two different non force-free models of the magnetic cloud allows us to incorporate expansion of the cloud. We use in-situ measurements from STEREO B/IMPACT to characterize the ICME. In addition, we use images from STEREO A/SECCHI-HI to analyze the propagation and visual evolution of the associated flux rope in the interplanetary medium. We compare and contrast these observations with the results of the analytical models.

  7. VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT CASCADES TOWARDS FILTRATION PLANT AND LOS ANGELES RESERVOIR - Los Angeles Aqueduct, Cascades Structures, Los Angeles, Los Angeles County, CA

  8. MAGAZINE E30. VIEW FROM BETWEEN 1ST AND 2ND BLAST WALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MAGAZINE E-30. VIEW FROM BETWEEN 1ST AND 2ND BLAST WALL LOOKING TO THE REAR OF THE MAGAZINE. - Naval Magazine Lualualei, Waikele Branch, Tunnel Magazine Type, Waikakalaua & Kipapa Gulches, Pearl City, Honolulu County, HI

  9. 14. Building 105, Facilities Engineering Building, 1830, interior, 1st floor, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Building 105, Facilities Engineering Building, 1830, interior, 1st floor, crib area of building, showing electrical and plumbing cribs, wall and ceiling detail, looking S. - Watervliet Arsenal, Building 105, South Broadway, on Hudson River, Watervliet, Albany County, NY

  10. 4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND VERTICAL BRACED DOUBLE ANGLES, DIAGONAL BRACING AND CROSS BRACED RAILING - Thirty-Sixth Street Bridge, Spanning Rabbit River, Hamilton, Allegan County, MI

  11. 1st International consensus guidelines for advanced breast cancer (ABC 1).

    PubMed

    Cardoso, F; Costa, A; Norton, L; Cameron, D; Cufer, T; Fallowfield, L; Francis, P; Gligorov, J; Kyriakides, S; Lin, N; Pagani, O; Senkus, E; Thomssen, C; Aapro, M; Bergh, J; Di Leo, A; El Saghir, N; Ganz, P A; Gelmon, K; Goldhirsch, A; Harbeck, N; Houssami, N; Hudis, C; Kaufman, B; Leadbeater, M; Mayer, M; Rodger, A; Rugo, H; Sacchini, V; Sledge, G; van't Veer, L; Viale, G; Krop, I; Winer, E

    2012-06-01

    The 1st international Consensus Conference for Advanced Breast Cancer (ABC 1) took place on November 2011, in Lisbon. Consensus guidelines for the management of this disease were developed. This manuscript summarizes these international consensus guidelines. PMID:22425534

  12. 19. Detail of brick courses 116, back side, between 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Detail of brick courses 1-16, back side, between 1st and 2nd windows from the right - Oklahoma State University, Boys Dormitory, Northwest corner of Hester Street & Athletic Avenue, Stillwater, Payne County, OK

  13. 20. Detail of brick courses 4675, back side, between 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. Detail of brick courses 46-75, back side, between 1st and 2nd windows from the right - Oklahoma State University, Boys Dormitory, Northwest corner of Hester Street & Athletic Avenue, Stillwater, Payne County, OK

  14. 45. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Turn span from SE. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  15. 46. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Overall view, from S. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  16. 28. ENGINE CLUSTER OF 1ST STAGE OF A SATURN I ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. ENGINE CLUSTER OF 1ST STAGE OF A SATURN I ROCKET ENGINE LOCATED ON NORTH SIDE OF STATIC TEST STAND. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

  17. BLOEDNER MONUMENT (32ND INDIANA, 1ST GERMAN MONUMENT), SECTION C, FRONT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BLOEDNER MONUMENT (32ND INDIANA, 1ST GERMAN MONUMENT), SECTION C, FRONT ELEVATION DETAIL OF GERMAN TEXT. VIEW TO NORTHEAST. - Cave Hill National Cemetery, 701 Baxter Avenue, Louisville, Jefferson County, KY

  18. Model-order reduction of magneto-harmonic problems based on POD: application to planar magnetic components

    NASA Astrophysics Data System (ADS)

    Taylor, Laurent; Henneron, Thomas; Margueron, Xavier; Le Menach, Yvonnick; Le Moigne, Philippe

    2016-04-01

    Predetermination of losses and inductance values in the design phase, is necessary for the development of high-performance magnetic components for power electronics. Numerical modeling, based on the finite element method (FEM) can be used to determine the characteristics of a particular component with a complex geometry in high frequency (HF). These models are very accurate but the computation time required is high compared to analytical models. The model order reduction (MOR) methods can be applied to reduce the computation time while maintaining high accuracy. Nowadays, the proper orthogonal decomposition (POD) is the most popular of MOR approaches. This technique has been applied to study problems in many fields of engineering. In this paper, the POD method is developed to solve magneto-harmonic problems in order to study a HF planar magnetic inductor. Contribution to the topical issue "Numelec 2015-Elected submissions", edited by Adel Razek

  19. Short and medium range order in two-component silica glasses by positron annihilation spectroscopy

    SciTech Connect

    Inoue, K.; Kataoka, H.; Nagai, Y.; Hasegawa, M.; Kobayashi, Y.

    2014-05-28

    The dependence of chemical composition on the average sizes of subnanometer-scale intrinsic structural open spaces surrounded by glass random networks in two-component silica-based glasses was investigated systematically using positronium (Ps) confined in the open spaces. The average sizes of the open spaces for SiO{sub 2}-B{sub 2}O{sub 3} and SiO{sub 2}-GeO{sub 2} glasses are only slightly dependent on the chemical compositions because the B{sub 2}O{sub 3} and GeO{sub 2} are glass network formers that are incorporated into the glass network of the base SiO{sub 2}. However, the open space sizes for all SiO{sub 2}-R{sub 2}O (R = Li, Na, K) glasses, where R{sub 2}O is a glass network modifier that occupies the open spaces, decrease rapidly with an increase in the R{sub 2}O concentration. Despite the large difference in the ionic radii of the alkali metal (R) atoms, the open space sizes decrease similarly for all the alkali metal atoms studied. This dependence of the chemical composition on the open space sizes in SiO{sub 2}-R{sub 2}O observed by Ps shows that the alkali metal atoms do not randomly occupy the structural open spaces, but filling of the open spaces by R{sub 2}O proceeds selectively from the larger to the smaller open spaces as the R{sub 2}O concentrations are increased.

  20. Identifying 1st instar larvae for three forensically important blowfly species using "fingerprint" cuticular hydrocarbon analysis.

    PubMed

    Moore, Hannah E; Adam, Craig D; Drijfhout, Falko P

    2014-07-01

    Calliphoridae are known to be the most forensically important insects when it comes to establishing the minimum post mortem interval (PMImin) in criminal investigations. The first step in calculating the PMImin is to identify the larvae present to species level. Accurate identification which is conventionally carried out by morphological analysis is crucial because different insects have different life stage timings. Rapid identification in the immature larvae stages would drastically cut time in criminal investigations as it would eliminate the need to rear larvae to adult flies to determine the species. Cuticular hydrocarbon analysis on 1st instar larvae has been applied to three forensically important blowflies; Lucilia sericata, Calliphora vicina and Calliphora vomitoria, using gas chromatography-mass spectrometry (GC-MS) and principal component analysis (PCA). The results show that each species holds a distinct "fingerprint" hydrocarbon profile, allowing for accurate identification to be established in 1-day old larvae, when it can be challenging to apply morphological criteria. Consequently, this GC-MS based technique could accelerate and strengthen the identification process, not only for forensically important species, but also for other entomological samples which are hard to identify using morphological features. PMID:24815992

  1. PREFACE: 1st European Conference on Gas Micro Flows (GasMems 2012)

    NASA Astrophysics Data System (ADS)

    Frijns, Arjan; Valougeorgis, Dimitris; Colin, Stéphane; Baldas, Lucien

    2012-05-01

    The aim of the 1st European Conference on Gas Micro Flows is to advance research in Europe and worldwide in the field of gas micro flows as well as to improve global fundamental knowledge and to enable technological applications. Gas flows in microsystems are of great importance and touch almost every industrial field (e.g. fluidic microactuators for active control of aerodynamic flows, vacuum generators for extracting biological samples, mass flow and temperature micro-sensors, pressure gauges, micro heat-exchangers for the cooling of electronic components or for chemical applications, and micro gas analyzers or separators). The main characteristic of gas microflows is their rarefaction, which for device design often requires modelling and simulation both by continuous and molecular approaches. In such flows various non-equilibrium transport phenomena appear, while the role played by the interaction between the gas and the solid device surfaces becomes essential. The proposed models of boundary conditions often need an empirical adjustment strongly dependent on the micro manufacturing technique. The 1st European Conference on Gas Micro Flows is organized under the umbrella of the recently established GASMEMS network (www.gasmems.eu/) consisting of 13 participants and six associate members. The main objectives of the network are to structure research and train researchers in the fields of micro gas dynamics, measurement techniques for gaseous flows in micro experimental setups, microstructure design and micro manufacturing with applications in lab and industry. The conference takes place on June 6-8 2012, at the Skiathos Palace Hotel, on the beautiful island of Skiathos, Greece. The conference has received funding from the European Community's Seventh Framework Programme FP7/2007-2013 under grant agreement ITN GASMEMS no. 215504. It owes its success to many people. We would like to acknowledge the support of all members of the Scientific Committee and of all

  2. Single-molecule imaging of a three-component ordered actin disassembly mechanism

    PubMed Central

    Jansen, Silvia; Collins, Agnieszka; Chin, Samantha M.; Ydenberg, Casey A.; Gelles, Jeff; Goode, Bruce L.

    2015-01-01

    The mechanisms by which cells destabilize and rapidly disassemble filamentous actin networks have remained elusive; however, Coronin, Cofilin and AIP1 have been implicated in this process. Here using multi-wavelength single-molecule fluorescence imaging, we show that mammalian Cor1B, Cof1 and AIP1 work in concert through a temporally ordered pathway to induce highly efficient severing and disassembly of actin filaments. Cor1B binds to filaments first, and dramatically accelerates the subsequent binding of Cof1, leading to heavily decorated, stabilized filaments. Cof1 in turn recruits AIP1, which rapidly triggers severing and remains bound to the newly generated barbed ends. New growth at barbed ends generated by severing was blocked specifically in the presence of all three proteins. This activity enabled us to reconstitute and directly visualize single actin filaments being rapidly polymerized by formins at their barbed ends while simultanteously being stochastically severed and capped along their lengths, and disassembled from their pointed ends. PMID:25995115

  3. Modulation of Higher-Order Olfaction Components on Executive Functions in Humans

    PubMed Central

    Fagundo, Ana B.; Jiménez-Murcia, Susana; Giner-Bartolomé, Cristina; Islam, Mohammed Anisul; de la Torre, Rafael; Pastor, Antoni; Casanueva, Felipe F.; Crujeiras, Ana B.; Granero, Roser; Baños, Rosa; Botella, Cristina; Fernández-Real, Jose M.; Frühbeck, Gema; Gómez-Ambrosi, Javier; Menchón, José M.; Tinahones, Francisco J.; Fernández-Aranda, Fernando

    2015-01-01

    The prefrontal (PFC) and orbitofrontal cortex (OFC) appear to be associated with both executive functions and olfaction. However, there is little data relating olfactory processing and executive functions in humans. The present study aimed at exploring the role of olfaction on executive functioning, making a distinction between primary and more cognitive aspects of olfaction. Three executive tasks of similar difficulty were used. One was used to assess hot executive functions (Iowa Gambling Task-IGT), and two as a measure of cold executive functioning (Stroop Colour and Word Test-SCWT and Wisconsin Card Sorting Test-WCST). Sixty two healthy participants were included: 31 with normosmia and 31 with hyposmia. Olfactory abilities were assessed using the ‘‘Sniffin’ Sticks’’ test and the olfactory threshold, odour discrimination and odour identification measures were obtained. All participants were female, aged between 18 and 60. Results showed that participants with hyposmia displayed worse performance in decision making (IGT; Cohen’s-d = 0.91) and cognitive flexibility (WCST; Cohen’s-d between 0.54 and 0.68) compared to those with normosmia. Multiple regression adjusted by the covariates participants’ age and education level showed a positive association between odour identification and the cognitive inhibition response (SCWT-interference; Beta = 0.29; p = .034). The odour discrimination capacity was not a predictor of the cognitive executive performance. Our results suggest that both hot and cold executive functions seem to be associated with higher-order olfactory functioning in humans. These results robustly support the hypothesis that olfaction and executive measures have a common neural substrate in PFC and OFC, and suggest that olfaction might be a reliable cognitive marker in psychiatric and neurologic disorders. PMID:26083418

  4. Meanings associated with the core component of clubhouse life: the work-ordered day.

    PubMed

    Tanaka, Kimiko; Davidson, Larry

    2015-06-01

    Despite the clubhouse model's 60-year existence internationally, the central nature of its core program, the "work-ordered day" (WOH) (Beard et al. in Psychosocial Rehabilitation Journal 5:47-53, 1982), is not well understood; hence, the primary focus of the present study was to explore members' experiences of the nature and meaning of the WOH. The study drew on qualitative interview data collected in 2009-2013 through open-ended questions and probes with 102 members and 24 staff from 5 Clubhouse International-certified clubhouses (2 US and 3 Finnish). Participant observation supplemented the interviews and all data were analyzed using a grounded theory approach (Charmaz in Rethinking methods in psychology, 1995; Glaser and Strauss in The discovery of grounded theory: strategies for qualitative research, 1967). Two major themes clustered around: (a) WOH in service of autonomy (things to do, sense of accomplishment, respite, development of occupational skills) and (b) WOH in service of relationships (receiving support; collaboration; and making contributions to the clubhouse community). Clubhouse members appeared to experience the WOH as meaningful because it helps them, as its best, reconstruct a life, develop their occupational self and skill sets, and experientially learn and live what parallels a good life in the general community. It appears that these experiences, interconnecting with the fundamental human needs for autonomy and relationship, point to wellbeing and recovery as part of personal growth. These findings can guide clubhouse daily practice in assessing members' psychosocial strengths and needs pertaining to recovery. Future research should elaborate on influences of sources of meaning, including work designs and the contributions of everyday socio-cultural interactive and reciprocal processes to these meanings. PMID:25417121

  5. HOTCFGM-2D: A Coupled Higher-Order Theory for Cylindrical Structural Components with Bi-Directionally Components with Bi-Directionally Graded Microstructures

    NASA Technical Reports Server (NTRS)

    Pindera, Marek-Jerzy; Aboudi, Jacob

    2000-01-01

    The objective of this two-year project was to develop and deliver to the NASA-Glenn Research Center a two-dimensional higher-order theory, and related computer codes, for the analysis and design of cylindrical functionally graded materials/structural components for use in advanced aircraft engines (e.g., combustor linings, rotor disks, heat shields, brisk blades). To satisfy this objective, two-dimensional version of the higher-order theory, HOTCFGM-2D, and four computer codes based on this theory, for the analysis and design of structural components functionally graded in the radial and circumferential directions were developed in the cylindrical coordinate system r-Theta-z. This version of the higher-order theory is a significant generalization of the one-dimensional theory, HOTCFGM-1D, developed during the FY97 for the analysis and design of cylindrical structural components with radially graded microstructures. The generalized theory is applicable to thin multi-phased composite shells/cylinders subjected to steady-state thermomechanical, transient thermal and inertial loading applied uniformly along the axial direction such that the overall deformation is characterized by a constant average axial strain. The reinforcement phases are uniformly distributed in the axial direction, and arbitrarily distributed in the radial and circumferential direction, thereby allowing functional grading of the internal reinforcement in the r-Theta plane. The four computer codes fgmc3dq.cylindrical.f, fgmp3dq.cylindrical.f, fgmgvips3dq.cylindrical.f, and fgmc3dq.cylindrical.transient.f are research-oriented codes for investigating the effect of functionally graded architectures, as well as the properties of the multi-phase reinforcement, in thin shells subjected to thermomechanical and inertial loading, on the internal temperature, stress and (inelastic) strain fields. The reinforcement distribution in the radial and circumferential directions is specified by the user. The thermal

  6. [Struggle against typhus in the Caucasian front during the 1st World War].

    PubMed

    Karatepe, Mustafa

    2002-01-01

    As an infectious disease, typhus has triggered many epidemics during the course of wars and caused thousands of death all through the ages. The French physician Charles Nicolle (1886-1936) defined its agent as a louse transferring the disease from man to man in 1909 and was awarded the Nobel Prize in 1928. Many cases were reported during the 1st World War both in the European and the Ottoman armies; and one of the most severe epidemics broke in the Caucasian front; a great number of civilians and soldiers died at winter in 1914 and 1915. Lice had to be destroyed in order to prevent the epidemic, but etuves in the Caucasian front was too few to achieve it. Clothes were cleansed in ovens by means of a method proposed by Dr. Abdülkadir Noyan (1886-1977). On March 28, 1915 the first typhus vaccination, obtained from the infected blood of the patients, was applied by Dr. Tevfik Salim (Saklam) (1882-1963). In 1916 Dr. Ahmet Fikri Tüzer discovered a disinfection apparatus called "buğu sandiği" (vapour box) which was widely used in the Caucasian front after 1917. This apparatus was highly useful in controlling the typhus epidemics. 164 health officers lost their lifes in the Caucasian front between 1914-1918, in addition, 7310 military casualties were recorded from 1915 to the end of the war. PMID:17152154

  7. Analysis and study of the in situ observation of the June 1st 2008 CME by STEREO

    NASA Astrophysics Data System (ADS)

    Nieves-Chinchilla, T.; Gómez-Herrero, R.; Viñas, A. F.; Malandraki, O.; Dresing, N.; Hidalgo, M. A.; Opitz, A.; Sauvaud, J.-A.; Lavraud, B.; Davila, J. M.

    2011-07-01

    In this work we present a combined study of the counterpart of the coronal mass ejection (CME) of June 1st of 2008 in the interplanetary medium. This event has been largely studied because of its peculiar initiation and its possible forecasting consequences for space weather. We show an in situ analysis (on days June 6th-7th of 2008) of the CME in the interplanetary medium in order to shed some light on the propagation and evolution mechanisms of the interplanetary CME (ICME). The goals of this work are twofold: gathering the whole in situ data from PLASTIC and IMPACT onboard STEREO B in order to provide a complete characterization of the ICME, and to present a model where the thermal plasma pressure is included. The isolated ICME features show a clear forward shock which we identify as an oblique forward fast shock accelerating ions to a few-hundred keV during its passage. Following the shock, a flux rope is easily defined as a magnetic cloud (MC) by the magnetic field components and magnitude, and the low proton plasma-β. During the spacecraft passage through the MC, the energetic ion intensity shows a pronounced decrease, suggesting a closed magnetic topology, and the suprathermal electron population shows a density and temperature increase, demonstrating the importance of the electrons in the MC description. The in situ evidence suggests that there is no direct magnetic connection between the forward shock and the MC, and the characteristics of the reverse shock determined suggest that the shock pair is a consequence of the propagation of the ICME in the interplanetary medium. The energetic ions measured by the SEPT instrument suggest that their enhancement is not related to any solar event, but is solely due to the interplanetary shock consistent with the fact that no flares are observed on the Sun. The changes in the polarity of the interplanetary magnetic field in the vicinity of the ICME observed by electron PADs from SWEA are in accordance with the idea

  8. World commercial aircraft accidents: 1st edition, 1946--1991

    SciTech Connect

    Kimura, C.Y.

    1992-02-01

    This report is a compilation of all accidents world-wide involving aircraft in commercial service which resulted in the loss of the airframe or one or more fatality, or both. This information has been gathered in order to present a complete inventory of commercial aircraft accidents. Events involving military action, sabotage, terrorist bombings, hijackings, suicides, and industrial ground accidents are included within this list. This report is organized into six chapters. The first chapter is the introduction. The second chapter contains the compilation of accidents involving world commercial jet aircraft from 1952 to 1991. The third chapter presents a compilation of accidents involving world commercial turboprop aircraft from 1952 to 1991. The fourth chapter presents a compilation of accidents involving world commercial pistonprop aircraft with four or more engines from 1946 to 1991. Each accident compilation or database in chapters two, three and four is presented in chronological order. Each accident is presented with information the following categories: date of accident, airline or operator and its flight number (if known), type of flight, type of aircraft and model, aircraft registration number, construction number/manufacturers serial number, aircraft damage resulting from accident, accident flight phase, accident location, number of fatalities, number of occupants, references used to compile the information, and finally cause, remarks, or description (brief) of the accident. The fifth chapter presents a list of all commercial aircraft accidents for all aircraft types with 100 or more fatalities in order of decreasing number of fatalities. Chapter six presents the commercial aircraft accidents for all aircraft types by flight phase. Future editions of this report will have additional follow-on chapters which will present other studies still in preparation at the time this edition was being prepared.

  9. INL FY2014 1st Quarterly Performance Analysis

    SciTech Connect

    Loran Kinghorn

    2014-07-01

    This report is published quarterly by the Idaho National Laboratory (INL) Performance Assurance Organization. The Department of Energy Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2 “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 76 occurrence reports and over 16 other deficiency reports (including not reportable events) identified at the INL during the period of October 2013 through December 2013. Battelle Energy Alliance (BEA) operates the INL under contract DE AC 07 051D14517

  10. When should orthostatic blood pressure changes be evaluated in elderly: 1st, 3rd or 5th minute?

    PubMed

    Soysal, Pinar; Aydin, Ali Ekrem; Koc Okudur, Saadet; Isik, Ahmet Turan

    2016-01-01

    Detection of orthostatic hypotension (OH) is very important in geriatric practice, since OH is associated with mortality, ischemic stroke, falls, cognitive failure and depression. It was aimed to determine the most appropriate time for measuring blood pressure in transition from supine to upright position in order to diagnose OH in elderly. Comprehensive geriatric assessment (CGA) including Head up Tilt Table (HUT) test was performed in 407 geriatric patients. Orthostatic changes were assessed separately for the 1st, 3rd and 5th minutes (HUT1, HUT3 and HUT5, respectively) taking the data in supine position as the basis. The mean age, recurrent falls, presence of dementia and Parkinson's disease, number of drugs, alpha-blocker and anti-dementia drug use, and fasting blood glucose levels were significantly higher in the patients with versus without OH; whereas, albumin and 25-hydroxy vitamin D levels were significantly lower (p<0.05). However, different from HUT3 and HUT5, Charlson Comorbidity Index and the prevalence of diabetes mellitus were higher, the use of antidiabetics, antipsychotics, benzodiazepine, opioid and levodopa were more common (p<0.05). Statistical significance of the number of drugs and fasting blood glucose level was prominent in HUT1 as compared to HUT3 (p<0.01, p<0.05). Comparison of the patients that had OH only in HUT1, HUT3or HUT5 revealed no difference in terms of CGA parameters. These results suggests that orthostatic blood pressure changes determined at the 1st minute might be more important for geriatric practice. Moreover, 1st minute measurement might be more convenient in the elderly as it requires shorter time in practice. PMID:27077324

  11. National Institute for Rocket Propulsion Systems 1st Annual Workshop

    NASA Technical Reports Server (NTRS)

    Doreswamy, Rajiv; Fry, Emma; Swindell, Tina

    2012-01-01

    The National Institute for Rocket Propulsion Systems (NIRPS) is a Government -wide initiative that seeks to ensure the resiliency of the Nation fs rocket propulsion community in order for the enterprise to remain vibrant and capable of providing reliable and affordable propulsion systems for the nation fs defense, civil and commercial needs. Recognizing that rocket propulsion is a multi-use technology that ensures the nation fs leadership in aerospace, the Government has a vested interest in maintaining this strategic capability through coordinated and synchronized acquisition programs and continual investments in research and development. NIRPS is a resource for collaboration and integration between all sectors of the U.S. propulsion enterprise, supporting policy development options, identifying technology requirements, and offering solutions that maximize national resources while ensuring that capability exists to meet future demand. NIRPS functions as a multi ]agency organization that our nation fs decision makers can look to for comprehensive information regarding all issues concerning the propulsion enterprise.

  12. Evidence for a nematic component to the Hidden Order parameter in URu2Si2 from differential elastoresistance measurements

    NASA Astrophysics Data System (ADS)

    Shapiro, Maxwell; Riggs, Scott; Maharaj, Akash; Raghu, Srinivas; Bauer, Eric; Baumbach, Ryan; Giraldo-Gallo, Paula; Wartenbe, Mark; Fisher, Ian

    2015-03-01

    In this work, we use a novel piezo actuator technique to measure the differential elastoresistance of the unconventional heavy fermion superconductor URu2Si2. Prior to the onset of superconductivity (Tc ~ 1 . 5 K), URu2Si2 undergoes a phase transition to a novel ``Hidden Order'' state which has defied comprehensive understanding for over 30 years. By tracking the temperature dependence of various elastoresistivity coefficients (proportional to the nematic susceptibility in the limit of linear response) above the Hidden Order transition temperature (THO ~ 17 . 5 K), our measurements reveal an extended nematic fluctuation regime at high temperatures and a strong anomalous divergence (which scales as the singular contribution to the heat capacity) proximate to the Hidden Order transition. Understood within a Ginzburg-Landau framework for coupled order parameters, these measurements imply that the Hidden Order parameter is a two-component vector oriented in the [110] crystallographic direction which breaks the underlying four-fold symmetry of the lattice (in addition to other symmetries).

  13. Sound Classification and Call Discrimination Are Decoded in Order as Revealed by Event-Related Potential Components in Frogs.

    PubMed

    Fang, Guangzhan; Yang, Ping; Xue, Fei; Cui, Jianguo; Brauth, Steven E; Tang, Yezhong

    2015-01-01

    Species that use communication sounds to coordinate social and reproductive behavior must be able to distinguish vocalizations from nonvocal sounds as well as to identify individual vocalization types. In this study we sought to identify the neural localization of the processes involved and the temporal order in which they occur in an anuran species, the music frog Babina daunchina. To do this we measured telencephalic and mesencephalic event-related potentials (ERPs) elicited by synthesized white noise (WN), highly sexually attractive (HSA) calls produced by males from inside nests and male calls of low sexual attractiveness (LSA) produced outside of nests. Each stimulus possessed similar temporal structures. The results showed the following: (1) the amplitudes of the first negative ERP component (N1) at ∼ 100 ms differed significantly between WN and conspecific calls but not between HSA and LSA calls, indicating that discrimination between conspecific calls and nonvocal sounds occurs in ∼ 100 ms, (2) the amplitudes of the second positive ERP component (P2) at ∼ 200 ms in the difference waves between HSA calls and WN were significantly higher than between LSA calls and WN in the right telencephalon, implying that call characteristic identification occurs in ∼ 200 ms and (3) WN evoked a larger third positive ERP component (P3) at ∼ 300 ms than conspecific calls, suggesting the frogs had classified the conspecific calls into one category and perceived WN as novel. Thus, both the detection of sounds and the identification of call characteristics are accomplished quickly in a specific temporal order, as reflected by ERP components. In addition, the most dynamic ERP patterns appeared in the left mesencephalon and the right telencephalon, indicating the two brain regions might play key roles in anuran vocal communication. PMID:26613526

  14. Robust Data Driven Model Order Estimation for Independent Component Analysis of fMRI Data with Low Contrast to Noise

    PubMed Central

    Majeed, Waqas; Avison, Malcolm J.

    2014-01-01

    Independent component analysis (ICA) has been successfully utilized for analysis of functional MRI (fMRI) data for task related as well as resting state studies. Although it holds the promise of becoming an unbiased data-driven analysis technique, a few choices have to be made prior to performing ICA, selection of a method for determining the number of independent components (nIC) being one of them. Choice of nIC has been shown to influence the ICA maps, and various approaches (mostly relying on information theoretic criteria) have been proposed and implemented in commonly used ICA analysis packages, such as MELODIC and GIFT. However, there has been no consensus on the optimal method for nIC selection, and many studies utilize arbitrarily chosen values for nIC. Accurate and reliable determination of true nIC is especially important in the setting where the signals of interest contribute only a small fraction of the total variance, i.e. very low contrast-to-noise ratio (CNR), and/or very focal response. In this study, we evaluate the performance of different model order selection criteria and demonstrate that the model order selected based upon bootstrap stability of principal components yields more reliable and accurate estimates of model order. We then demonstrate the utility of this fully data-driven approach to detect weak and focal stimulus-driven responses in real data. Finally, we compare the performance of different multi-run ICA approaches using pseudo-real data. PMID:24788636

  15. Analytic calculation of second-order electric response properties with the normalized elimination of the small component (NESC) method

    NASA Astrophysics Data System (ADS)

    Zou, Wenli; Filatov, Michael; Cremer, Dieter

    2012-08-01

    Analytic second derivatives of the relativistic energy for the calculation of electric response properties are derived utilizing the normalized elimination of the small component (NESC) method. Explicit formulas are given for electric static dipole polarizabilities and infrared intensities by starting at the NESC representation of electric dipole moments. The analytic derivatives are implemented in an existing NESC program and applied to calculate dipole moments, polarizabilities, and the infrared spectra of gold- and mercury-containing molecules as well as some actinide molecules. Comparison with experiment reveals the accuracy of NESC second order electric response properties.

  16. Performance indicators for 1st quarter CY 1993

    SciTech Connect

    Not Available

    1993-08-01

    The Department of Energy (DOE) has established a Department-wide Performance Indicator (PI) Program for trending and analysis of operational data as directed by DOE Order 5480.26. The PI Program was established to provide a means for monitoring the environment, safety, and health (ES&H) performance of the DOE at the Secretary and other management levels. This is the ninth in a series of quarterly reports generated for the Department of Energy Field Office, Idaho (DOE-ID) by EG&G Idaho, Inc. to meet the requirements of the PI Program as directed by the DOE Standard. DOE-STD-1048-92 identifies four general areas of PIs. They are: Personnel Safety, Operational Incidents, Environment and Management. These four areas have been subdivided into 26 performance indicators. Approximately 115 performance indicator control and distribution charts comprise the body of this report A brief summary of PIs contained in each of these general areas is provided in the following pages. The four EG&G facilities whose performance is charted herein are as follows: (1) The Advanced Test Reactor (ATR); (2) The Radioactive Waste Management Complex (RWMC); (3) The Waste Experimental Reduction Facility (WERF) and (4) The Test Reactor Area (TRA) Hot Cells.

  17. HOTCFGM-1D: A Coupled Higher-Order Theory for Cylindrical Structural Components with Through-Thickness Functionally Graded Microstructures

    NASA Technical Reports Server (NTRS)

    Pindera, Marek-Jerzy; Aboudi, Jacob

    1998-01-01

    The objective of this three-year project was to develop and deliver to NASA Lewis one-dimensional and two-dimensional higher-order theories, and related computer codes, for the analysis, optimization and design of cylindrical functionally graded materials/structural components for use in advanced aircraft engines (e.g., combustor linings, rotor disks, heat shields, blisk blades). To satisfy this objective, a quasi one-dimensional version of the higher-order theory, HOTCFGM-1D, and four computer codes based on this theory, for the analysis, design and optimization of cylindrical structural components functionally graded in the radial direction were developed. The theory is applicable to thin multi-phased composite shell/cylinders subjected to macroscopically axisymmetric thermomechanical and inertial loading applied uniformly along the axial direction such that the overall deformation is characterized by a constant average axial strain. The reinforcement phases are uniformly distributed in the axial and circumferential directions, and arbitrarily distributed in the radial direction, thereby allowing functional grading of the internal reinforcement in this direction.

  18. Minimally Invasive Arthrodesis of 1st Metatarsophalangeal Joint for Hallux Rigidus.

    PubMed

    Sott, A H

    2016-09-01

    First metatarsophalangeal joint arthrodesis plays a significant role in the management of symptomatic hallux rigidus/osteoarthritis of the 1st metatarsophalangeal joint. Several open and few percutaneous techniques have been described in the literature. This article describes and discusses a percutaneous technique that has been successfully used to achieve a pain-free stable and functional 1st metatarsophalangeal joint. All aspects of surgical indication and operative technique and details of patient-reported outcomes are presented with a referenced discussion. PMID:27524706

  19. Monitoring North Korea Explosions: Status and Result of 1st and 2nd Tests (Invited)

    NASA Astrophysics Data System (ADS)

    Chi, H.; Lee, H.; Shin, J.; Park, J.; Sheen, D.; Kim, G.; Che, I.; Lim, I.; Kim, T.

    2009-12-01

    Through data exchanging with China, Russia and Japan, KIGAM could monitor North Korea explosion tests in near real time with azimuthal full coverage from the test site. Except for the East Sea (Japan Sea) side, the seismic stations are distributed uniformly along the boundaries of North Korea and adjacent countries, and only stations with the distance of 200 to 550 Km from the test site were considered. Irrespective of azimuthal directions of stations from the test site, the conventional discrimination, Pn/Lg spectral ratio clearly showed that both tests were explosion. But mb-Ms discrimination did not show apparently the known pattern of explosion for both tests. Body wave magnitude, mb(Pn) of 2nd test, which was evaluated as 4.5 by KIGAM, varies with directional location of stations widely from 4.1 to 5.2. The magnitude obtained from Lg, mb(Lg), showed narrow variation between 4.3 to 4.7 with the average of 4.5. In the case of 1st test, both mb(Pn) and mb(Lg) showed equivalently large variation with directional station location. The error ellipses of epicentral determination of test site for 1st and 2nd tests showed almost identical pattern if they were separately calculated with the same configuration of stations. But the combined use of 1st and 2nd test data showed that 2nd test site was moved approximately 2 Km westward from 1st site. The cut-off frequencies of P wave of 1st and 2nd tests showed no or negligible difference even though the estimated yield of 2nd test were much larger than that of 1st one. The ratio of 1st and 2nd P-wave amplitudes showed from 2 to 3.1 times. Correspondingly the estimated energy or yield were ranged from 4 to roughly 10 times. KIGAM evaluated the yield of 2nd test were 8 times in the average larger than that of 1st one.

  20. Superfluidity and solid order in a two-component Bose gas with dipolar interactions in an optical lattice

    NASA Astrophysics Data System (ADS)

    Kuno, Yoshihito; Suzuki, Keita; Ichinose, Ikuo

    2014-12-01

    In this paper, we study an extended bosonic t-J model in an optical lattice, which describes two-component hard-core bosons with nearest-neighbor pseudospin interactions and, also, inter- and intraspecies dipole-dipole interactions. In particular, we focus on the case in which two-component hard-core bosons have antiparallel polarized dipoles with each other. The global phase diagram is studied by means of the Gutzwiller variational method and also quantum Monte Carlo (QMC) simulations. Both calculations show that a striped solid order, besides a checkerboard one, appears as a result of the dipole-dipole interactions. By QMC, we find that two kinds of supersolids (SSs) form, i.e., checkerboard SS and striped SS, and we also verify the existence of an exotic phase between the striped solid and the checkerboard SS. Finally, by QMC, we study the t-J-like model, which was recently realized experimentally by A. de Paz et al. [Phys. Rev. Lett. 111, 185305 (2013), 10.1103/PhysRevLett.111.185305].

  1. How Many Attempts Until Success in Some Core 1st. Year Disciplines?

    ERIC Educational Resources Information Center

    Fernandes, Graça Leão; Andrade e Silva, João; Lopes, Margarida Chagas

    2012-01-01

    Due to a general development in education brought about by democracy, Portugal has witnessed tremendous development in Higher Education (HE) since the beginning of the 1980s. Nevertheless, the percentage of graduates among the Portuguese population still ranks far below most European countries. This is why academic performance in HE 1st cycle…

  2. 130. Post1911. Photograph labeled, 'SEASON 1913. CAPTAIN, 1st MATE, SUPT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    130. Post-1911. Photograph labeled, 'SEASON 1913. CAPTAIN, 1st MATE, SUPT AND STOREKEEPER, A.P. ASS'N CANNERY, SHIP STAR OF ALASKA.' View forward from mizzenmast, post side. - Ship BALCLUTHA, 2905 Hyde Street Pier, San Francisco, San Francisco County, CA

  3. First-Generation College Students' 1st-Year College Experiences: Challenges Attending a Private University

    ERIC Educational Resources Information Center

    Reid, Josephine

    2013-01-01

    First-generation college students (FGCS) face challenges when switching from high school to college and during their 1st-year in college. Additionally, FGCS may have difficulty understanding the steps required to prepare for and enroll in postsecondary education. The social capital theory examines support of social, academic, and cultural networks…

  4. 25. PRIMARY POWER TRANSMISSION BELT HOLES IN 1st FLOOR MILL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. PRIMARY POWER TRANSMISSION BELT HOLES IN 1st FLOOR MILL NO. 1 CEILING. WATER-POWERED MACHINERY LOCATED IN BASEMENT RAN LEATHER BELTS THROUGH THESE HOLES. POWER WAS THEN TRANSMITTED TO SHAFTS AND PULLEYS TO RUN MACHINERY ON MILL FLOORS. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  5. 77 FR 22574 - Filing Dates for the Washington Special Election In the 1st Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-16

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the Washington Special Election In the 1st Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special election. SUMMARY: Washington has...

  6. 76 FR 51366 - Filing Dates for the Oregon Special Election in the 1st Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-18

    ... information on these requirements, see Federal Register Notice 2009-03, 74 FR 7285 (February 17, 2009... November 8, 2011, and January 31, 2012, to fill the U.S. House seat in the 1st Congressional District... forms: One form to cover 2011 activity, labeled as the Year-End Report; and the other form to cover...

  7. Perceptual Narrowing of Linguistic Sign Occurs in the 1st Year of Life

    ERIC Educational Resources Information Center

    Palmer, Stephanie Baker; Fais, Laurel; Golinkoff, Roberta Michnick; Werker, Janet F.

    2012-01-01

    Over their 1st year of life, infants' "universal" perception of the sounds of language narrows to encompass only those contrasts made in their native language (J. F. Werker & R. C. Tees, 1984). This research tested 40 infants in an eyetracking paradigm and showed that this pattern also holds for infants exposed to seen language--American Sign…

  8. Highlights of the 1st Student Symposium of the ISCB RSG UK

    PubMed Central

    Rahman, Farzana; Farmer, Rohit; Das, Sayoni; Vayani, Fatima; Hassan, Mehedi

    2015-01-01

    This short report summarises the scientific content and activities of a student-led event, the 1st student symposium by the UK Regional Student Group of the International Society for Computational Biology. The event took place on the 8th of October 2014. PMID:26998223

  9. 48. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms Latching mechanism, E end of turn span, view from N. Sarcone Photography, Columbus, MS. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  10. 42. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Copy of postcard ca. 1900. Copy owned and made by Jack Donnell, Columbus, Ms. Shows two-span steel truss, built by Phoenix Bridge Co. in 1878. Negative copied by: Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  11. 49. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    49. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Top of pier and underside of w end of turn span. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  12. 47. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    47. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Latching mechanism, E end of turn span, viewed from W. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  13. The Course of Psychological Disorders in the 1st Year After Cancer Diagnosis

    ERIC Educational Resources Information Center

    Kangas, Maria; Henry, Jane L.; Bryant, Richard A.

    2005-01-01

    This study investigated the relationship between acute stress disorder (ASD) and posttraumatic stress disorder (PTSD) and comorbid anxiety, depressive, and substance use disorders over the first 12-month period following a cancer diagnosis. Individuals recently diagnosed with 1st onset head and neck or lung malignancy were assessed for ASD within…

  14. Transient tracking of low and high-order eccentricity-related components in induction motors via TFD tools

    NASA Astrophysics Data System (ADS)

    Climente-Alarcon, V.; Antonino-Daviu, J.; Riera-Guasp, M.; Pons-Llinares, J.; Roger-Folch, J.; Jover-Rodriguez, P.; Arkkio, A.

    2011-02-01

    The present work is focused on the diagnosis of mixed eccentricity faults in induction motors via the study of currents demanded by the machine. Unlike traditional methods, based on the analysis of stationary currents (Motor Current Signature Analysis (MCSA)), this work provides new findings regarding the diagnosis approach proposed by the authors in recent years, which is mainly focused on the fault diagnosis based on the analysis of transient quantities, such as startup or plug stopping currents (Transient Motor Current Signature Analysis (TMCSA)), using suitable time-frequency decomposition (TFD) tools. The main novelty of this work is to prove the usefulness of tracking the transient evolution of high-order eccentricity-related harmonics in order to diagnose the condition of the machine, complementing the information obtained with the low-order components, whose transient evolution was well characterised in previous works. Tracking of high-order eccentricity-related harmonics during the transient, through their associated patterns in the time-frequency plane, may significantly increase the reliability of the diagnosis, since the set of fault-related patterns arising after application of the corresponding TFD tool is very unlikely to be caused by other faults or phenomena. Although there are different TFD tools which could be suitable for the transient extraction of these harmonics, this paper makes use of a Wigner-Ville distribution (WVD)-based algorithm in order to carry out the time-frequency decomposition of the startup current signal, since this is a tool showing an excellent trade-off between frequency resolution at both high and low frequencies. Several simulation results obtained with a finite element-based model and experimental results show the validity of this fault diagnosis approach under several faulty and operating conditions. Also, additional signals corresponding to the coexistence of the eccentricity and other non-fault related phenomena making

  15. Synchronization of memristor-based recurrent neural networks with two delay components based on second-order reciprocally convex approach.

    PubMed

    Chandrasekar, A; Rakkiyappan, R; Cao, Jinde; Lakshmanan, S

    2014-09-01

    We extend the notion of Synchronization of memristor-based recurrent neural networks with two delay components based on second-order reciprocally convex approach. Some sufficient conditions are obtained to guarantee the synchronization of the memristor-based recurrent neural networks via delay-dependent output feedback controller in terms of linear matrix inequalities (LMIs). The activation functions are assumed to be of further common descriptions, which take a broad view and recover many of those existing methods. A Lyapunov-Krasovskii functional (LKF) with triple-integral terms is addressed in this paper to condense conservatism in the synchronization of systems with additive time-varying delays. Jensen's inequality is applied in partitioning the double integral terms in the derivation of LMIs and then a new kind of linear combination of positive functions weighted by the inverses of squared convex parameters has emerged. Meanwhile, this paper puts forward a well-organized method to manipulate such a combination by extending the lower bound lemma. The obtained conditions not only have less conservatism but also less decision variables than existing results. Finally, numerical results and its simulations are given to show the effectiveness of the proposed memristor-based synchronization control scheme. PMID:24953308

  16. 46. NORTH END OF MILL NO. 2, 1st FLOOR, BELOW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. NORTH END OF MILL NO. 2, 1st FLOOR, BELOW PICKER AND CLOTH ROOM AREA. FUNCTION OF THIS SPACE UNKNOWN AT PRESENT. NOTE THAT EYE BEAM REPLACES ORIGINAL WALL OF 1892 PICKER HOUSE. CENTER (OR LEFT) DOOR IS ENTRY TO MILL NO. 2. RIGHT DOOR IS ENTRY TO 1892 NAPPER ROOM. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  17. 1st Central and Eastern European Proteomic Conference and 3rd Czech Proteomic Conference.

    PubMed

    Kovarova, Hana; Gadher, Suresh Jivan; Archakov, Alexander

    2008-02-01

    The 1st Central and Eastern European Proteomic Conference was organized together with the 3rd Czech Proteomic Conference in the TOP Hotel, Prague in the Czech Republic from the 29th to the 31st October, 2007. The aim was to strengthen links with scientists from Central and Eastern Europe including Russia, which until now have been weak or nonexistent, and to highlight the emergence of excellent proteomic studies from various countries, which until now were not visible. PMID:18282121

  18. 7. Photographic copy of original construction drawing, ELECTRICAL 1ST AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photographic copy of original construction drawing, ELECTRICAL 1ST AND 2ND FLOOR PLANS, SHEET 10 of 11, DRAWING NO. 35-03-05 SF 5/1677, U.S. Army Engineer District, Detroit, Corps of Engineers, 9 June, 1959, on file Selfridge Base Museum. - Selfridge Field, Building No. 1041, West of E Street, north of D Street, Mount Clemens, Macomb County, MI

  19. Ruthenium indenylidene “1st generation” olefin metathesis catalysts containing triisopropyl phosphite

    PubMed Central

    Guidone, Stefano; Nahra, Fady; Slawin, Alexandra M Z

    2015-01-01

    Summary The reaction of triisopropyl phosphite with phosphine-based indenylidene pre-catalysts affords “1st generation” cis-complexes. These have been used in olefin metathesis reactions. The cis-Ru species exhibit noticeable differences with the trans-Ru parent complexes in terms of structure, thermal stability and reactivity. Experimental data underline the importance of synergistic effects between phosphites and L-type ligands. PMID:26425210

  20. 1st International Symposium on Stress-Associated RNA Granules in Human Disease and Viral Infection

    PubMed Central

    Banfield, Bruce W.; Mouland, Andrew J.; McCormick, Craig

    2014-01-01

    In recent years, important linkages have been made between RNA granules and human disease processes. On June 8-10 of this year, we hosted a new symposium, dubbed the 1st International Symposium on Stress-Associated RNA Granules in Human Disease and Viral Infection. This symposium brought together experts from diverse research disciplines ranging from cancer and neuroscience to infectious disease. This report summarizes speaker presentations and highlights current challenges in the field. PMID:25256393

  1. 43. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    43. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Copy of photo 1900. Shows 1878 M&O RR bridge. The steamboat, 'Gopher,' in foreground, was an archeological survey vessel from the Franklin Institute in Philadelphia. Published in Art in Mississippi (1901). Credit: Copied from print in Lowndes Co. Public Library by Sarcone Photography, Columbus, Ms. 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  2. 44. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Detail from Camille Drie's map: A Bird's Eye View of Columbus, Mississippi ca. 1875-76. Shows M&O RR bridge before the Phoenix Bridge Co. erected iron truss spans in 1878. Credit: Photostat of map in Lowndes Co. Public Library Sarcone Photography, Columbus, Ms. 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  3. Higher-order contributions to ion-acoustic solitary waves in a multicomponent plasma consisting of warm ions and two-component nonisothermal electrons

    SciTech Connect

    Das, K.P.; Majumdar, S.R.; Paul, S.N. ||

    1995-05-01

    An integrated form of the governing equations in terms of pseudopotential higher-order nonlinear and dispersive effects is obtained by applying the reductive perturbation method for ion-acoustic solitary waves in a collisionless unmagnetized multicomponent plasma having warm ions and two-component nonisothermal electrons. The present method is advantageous because instead of solving an inhomogeneous second-order differential equation at each order, as in the standard procedure, we solve a first-order inhomogeneous equation at each order except at the lowest. The expressions of both Mach number and width of the solitary wave are obtained as a function of the amplitude of the wave for third-order nonlinear and dispersive effects. The variations of potential, width, and Mach number against soliton amplitude are shown graphically, taking into consideration the nonisothermality of two-component electrons in the plasma.

  4. PREFACE: PAGES 1st Young Scientists Meeting (YSM) - 'Retrospective views on our planet's future'

    NASA Astrophysics Data System (ADS)

    Margrethe Basse, Ellen

    2010-03-01

    more recent pollution. The concept and format of the 1st PAGES YSM worked very well, and

  5. The 1st October 2009 Messina debris flows: first analysis for a susceptibility model

    NASA Astrophysics Data System (ADS)

    Agnesi, Valerio; Cappadonia, Chiara; Conoscenti, Christian; Costanzo, Dario; Pino, Paolo; Puglisi, Claudio; Rotigliano, Edoardo

    2010-05-01

    In the evening of the 1st of October 2009, a sector of the Messina district (Sicily, Italy) was struck by a number of debris flows, triggered by extraordinary intense rainfall that, from 2 pm to 10 pm, discharged an amount of more than 160 mm and that followed the ones of September 23-24 (more than 200 mm in 10 hours). A number of villages (Altolia, Briga, Giampilieri, Guidomandri, Itala, Molino, Pezzolo, Scaletta), suffered for severe damages, including the destruction of houses and small buildings and more of 30 deaths. The area is located South from the city of Messina and mainly includes five short fluvial basins, that from the Peloritanian chain drain south-eastward for some kilometres to the Ionian sea. The area is characterized by the outcropping of metamorphic rocks and, due to the closeness of the chain (ranging up to 1200 meters a.s.l.) to the sea, the steepness of the slopes is typically very high. The debris flows involved the shallow layer made up of colluvial/eluvial and landslide deposits, having a thickness of some decimetres; both pure debris flow and debris slide movements have been inferred at the initiation zones, in light of the morphologic features of the source area (scarps). Also, according to the specific patterns recognized for the flow track zone, four typologies have been distinguished: ribbon-shaped, triangular, arch-shaped and multi-lobed debris flow. The landslides moved fast, as single or multiple/successive confluent style, so that already at the medium sector of the slopes, where the villages are, huge volumes of the debris flowed. Due to the shallowness of the failure zone, the high water content and velocity, the tracks of the debris flows have been highly controlled by hydrography, reaching, where no obstacles were present, the valley floor, with kilometric run-out distances. To each of the 379 recognized debris flows, which produced a total landslide area of about 7 km2, a landslide identification point (LIP) has been assigned

  6. Dipolar interactions and hydrogen bonding in supramolecular aggregates: understanding cooperative phenomena for 1st hyperpolarizability.

    PubMed

    Datta, Ayan; Pati, Swapan K

    2006-12-01

    Weak intermolecular forces like dipolar interactions and hydrogen-bonding lead to a variety of different packing arrangements of molecules in crystals and self-assemblies. Such differences in the arrangements change the extent of excitonic splitting and excitation spectra in the multichromophore aggregates. In this tutorial review, the role of such interactions in fine tuning the linear and 1st non-linear optical (NLO) responses in molecular aggregates are discussed. The non-additivity of these optical properties arise specifically due to such cooperative interactions. Calculations performed on dimers, trimers and higher aggregates for model systems provide insights into the interaction mechanisms and strategies to enhance the 1st hyperpolarizabilities of pi-conjugated molecular assemblies. Flexible dipole orientations in the alkane bridged chromophores show odd-even variations in their second-harmonic responses that are explained through their dipolar interactions in different conformations. Parameters for the optical applications of molecules arranged in constrained geometry, like in Calix[n]arene, have been elucidated. We also highlight the recent developments in this field of research together with their future prospects. PMID:17225890

  7. Autopsy as a tool for learning gross anatomy during 1st year MBBS

    PubMed Central

    Goyal, Parmod Kumar; Gupta, Monika; Kaur, Jaswinder

    2016-01-01

    Introduction: Embalmed cadavers are the primary tool for teaching anatomy. However, difficulties are encountered due to changed color/texture of organs, hardening of tissues, and smell of formaldehyde. To overcome these difficulties, dissections on a fresh human body were shown to the 1st year MBBS students, and their perception was noted. Materials and Methods: After taking universal precautionary measures, postmortem dissections were shown to students on voluntary donated bodies in the dissection hall, in addition to the traditional teaching on embalmed cadavers. Feedback was taken from students and faculty regarding the utility of these sessions. Results: Better appreciation of texture, orientation, location, and relations of organs in fresh body, integration of teaching, awareness of the process and laws related to body donations were the outcomes of the study. However, the smell and sight of blood was felt to be nauseating by some students, and some students were worried about the spread of infectious diseases. Conclusions: Visualizing single fresh body dissection during 1st year professional MBBS is recommended either on medicolegal autopsy or on voluntarily-donated bodies. PMID:27563594

  8. Three-dimensional analysis of the distal movement of maxillary 1st molars in patients fitted with mini-implant-aided trans-palatal arches

    PubMed Central

    Miresmaeili, Amirfarhang; Sajedi, Ahmad; Moghimbeigi, Abbas

    2015-01-01

    Objective The aim of this study was to investigate three-dimensional molar displacement after distalization via miniscrews and a horizontal modification of the trans-palatal-arch (TPA). Methods The subjects in this clinical trial were 26 Class II patients. After the preparation of a complete set of diagnostic records, miniscrews were inserted between the maxillary 2nd premolar and 1st molar on the palatal side. Elastic modules connected to the TPA exerting an average force of 150-200 g/side parallel to the occlusal plane were applied. Cone-beam computed tomography was utilized to evaluate the position of the miniscrews relative to the adjacent teeth and maxillary sinus, and the direction of force relative to molar furcation. The distances from the central point of the incisive papilla to the mesiopalatal cusps of the 1st maxillary molars and the distances between the mesiopalatal cusps of the left and right molars were measured to evaluate displacement of the maxillary molars on the horizontal plane. Interocclusal space was used to evaluate vertical changes. Results Mean maxillary 1st molar distalization was 2.3 ± 1.1 mm, at a rate of 0.4 ± 0.2 mm/month, and rotation was not significant. Intermolar width increased by 2.9 ± 1.8 mm. Molars were intruded relative to the neighboring teeth, from 0.1 to 0.8 mm. Conclusions Distalization of molars was possible without extrusion, using the appliance investigated. The intrusive component of force reduced the rate of distal movement. PMID:26445718

  9. A learning skills course for the 1st year medical students: an experience at a Saudi medical school

    PubMed Central

    Siddiqui, Imran A; Bin Abdulrahman, Khalid A; Alsultan, Mohammed A

    2015-01-01

    Background Every year nearly 1,500 students enter into medical program after passing high school and national aptitude exams. However, many students experience frustration, failure, and psychological morbidities like stress, depression, and anxiety because they are not aware of their learning styles or do not have effective learning skills and strategies. The College of Medicine of Al-Imam Muhammad ibn Saud Islamic University has adopted the outcome based, community oriented, Spiral Curriculum. Although the curriculum is innovative, on the other hand, it is very demanding. Objective The purpose of this paper is to share educational structure and evaluation results of the course on effective learning and study skills for the 1st year medical students. Methods To prepare our students in order to cope with this demanding but promising curriculum, we conducted an effective and comprehensive learning skills course for 16 weeks in the first semester of year 1 in the medical program. Performance of each student was assessed and the course evaluation was done by students at the end of the course. Results The attendance of the students throughout the course was over 90%. The average performance of students in the summative assessment was 78% and the course was generally liked by the students. Discussion Students overall had a positive attitude toward the learning skills course. Majority of the students showed interest in attending the sessions regularly and realized the significance of this course to improve their learning skills. PMID:25848332

  10. Higher order nonlinear effects on wave structures in a four-component dusty plasma with nonisothermal electrons

    SciTech Connect

    Singh Gill, Tarsem; Bedi, Chanchal; Saini, Nareshpal Singh

    2011-04-15

    The higher order solutions of dust acoustic wave in dusty plasma consisting of positively charged warm adiabatic dust, negatively charged cold dust, and nonisothermally distributed electrons are studied. The Schamel-KdV equation is derived using reductive perturbation method (RPM). RPM is further extended to include the contributions of higher order terms and a generalized KdV equation is derived to observe the deviation from isothermality. Effects of nonisothermal parameter, mass and charge ratio, ratio of ion to electron temperatures, and ratio of dust to ion temperatures have been thoroughly studied. By using the renormalization method of Kodama and Taniuti [J. Phys. Soc. Jpn. 45, 298 (1978)], authors have also discussed characteristics of the dressed solitons.

  11. Modal Characterization using Principal Component Analysis: application to Bessel, higher-order Gaussian beams and their superposition

    PubMed Central

    Mourka, A.; Mazilu, M.; Wright, E. M.; Dholakia, K.

    2013-01-01

    The modal characterization of various families of beams is a topic of current interest. We recently reported a new method for the simultaneous determination of both the azimuthal and radial mode indices for light fields possessing orbital angular momentum. The method is based upon probing the far-field diffraction pattern from a random aperture and using the recorded data as a ‘training set'. We then transform the observed data into uncorrelated variables using the principal component analysis (PCA) algorithm. Here, we show the generic nature of this approach for the simultaneous determination of the modal parameters of Hermite-Gaussian and Bessel beams. This reinforces the widespread applicability of this method for applications including information processing, spectroscopy and manipulation. Additionally, preliminary results demonstrate reliable decomposition of superpositions of Laguerre-Gaussians, yielding the intensities and relative phases of each constituent mode. Thus, this approach represents a powerful method for characterizing the optical multi-dimensional Hilbert space. PMID:23478330

  12. Local slope, hillslope length and upslope unstable area as 1st order controls on co-seismic landslide hazard.

    NASA Astrophysics Data System (ADS)

    Milledge, D.; Densmore, A. L.; Petley, D. N.; Bellugi, D. G.; Li, G.

    2015-12-01

    Many communities in mountainous areas have limited access to and/or understanding of co-seismic landslide hazard maps. Furthermore these maps rarely provide the information that a community seeks: Where is safest? How big could the landslide be? Geomorphic intuition suggests that: 1) on the ridges one is less likely to be hit by a landslide than elsewhere in the landscape; 2) hazard increases with the amount of upslope unstable area; 3) longer slopes contain more candidate landslides and are also capable of producing larger landslides thus they constitute a more severe hazard. These observations could help communities in siting infrastructure or making earthquake plans but have not, to our knowledge, been tested against past landslide inventories. Co-seismic landslide models make no attempt to predict landslide size and focus on initiation, ignoring the runout which is critical in the slope length control on hazard. Here we test our intuitive hypotheses using an inventory of co-seismic landslides from the 2008 Wenchuan earthquake. The inventory is mapped from high-resolution remote imagery using an automated algorithm and manual delineation and does not distinguish between source and runout zones. Discretizing the study area into 30 m cells we define landslide hazard as the probability that a cell is within a mapped landslide polygon (p(ls)). We find that p(ls) increases rapidly with increasing slope and upslope area. Locations with low local slope (<10˚) or upslope area (<900 m2/m) have p(ls) less than one third of the areal average. The joint p(ls) conditional on local slope and upslope area identifies long steep slopes as particularly hazardous and ridges (where slope and upslope area are both low) as particularly low hazard. Examining the slope lengths associated with each landslide in the inventory we find that hillslope length sets an upper limit on landslide size but that its influence on the detailed size distribution is more difficult to untangle. Finally, we combine local slope and upslope unstable area in a simple mechanistic rule-based model of landslide runout hazard and test its ability to predict p(ls). Our findings support the intuitive view that long steep slopes are among the most hazardous locations while ridges are the least hazardous locations in terms of co-seismic landslides.

  13. EDITORIAL: The 1st International Conference on Nanomanufacturing (NanoMan2008) The 1st International Conference on Nanomanufacturing (NanoMan2008)

    NASA Astrophysics Data System (ADS)

    Luo, Jack Jiqui; Fang, Fengzhou

    2009-05-01

    Nanomanufacturing is an emerging technology in the field of synthesis of nanomaterials, manufacture of nanodevices, nanosystems and the relevant characterization technologies, and will greatly impact our society and environment: speeding up scientific discovery, technological development, improving healthcare and living standards and slowing down the exhaustion of energy resources, to name but few. The 1st International Conference on Nanomanufacturing (NanoMan2008) was held on the 13-16 July 2008 in Singapore in conjunction with ThinFilm2008 (The 4th International Conference on Technological Advances of Thin Films & Surface Coatings). Approximately 140 delegates from all over the world have participated in the conference and presented their latest discoveries and technological developments. The main focuses of the conference were modern nanomanufacturing by laser machining, focused ion beam fabrication, nano/micro-molding/imprinting, nanomaterial synthesis and characterization, nanometrology and nano/microsystems fabrication and characterization. There was also great interest in applications of nanomanufacturing technologies in traditional areas such as free form machining, polishing and grinding with nano-scale precision and the smoothness of surfaces of objects, and applications in space exploration, military and medicine. This special issue is devoted to NanoMan2008 with a collection of 9 invited talks presented at the conference, covering all the topics of nanomanufacturing technology and development. These papers have been upgraded by the authors with new results and discoveries since the preparation of the conference manuscripts, hence presenting the latest developments. We would like to take this opportunity to thank all the delegates who attended the conference and made the conference successful, and to the authors who contributed papers to this special issue. Thanks also go to the conference committee for their efforts and devotion to the conference. We

  14. Correlates and Phenomenology of 1st and 3rd Person Memories

    PubMed Central

    Sutin, Angelina R.; Robins, Richard W.

    2010-01-01

    The present research addressed fundamental questions about the visual perspective of autobiographical memories: Are stable personality characteristics associated with visual perspective? Does visual perspective influence the memory's phenomenological qualities? Participants in Study 1 (N = 1,684) completed individual-difference measures and indicated the perspective from which they generally retrieve memories. Participants in Study 2 (N = 706) retrieved a memory from their natural or manipulated perspective, rated its phenomenology, and completed the same individual-difference measures. Dissociation and anxiety were associated with 3rd person retrieval style; the Big Five personality traits were primarily unrelated to perspective. Compared to 3rd person memories, naturally-occurring 1st person memories were higher on Vividness, Coherence, Accessibility, Sensory Detail, Emotional Intensity, and Time Perspective and lower on Distancing; manipulating perspective eliminated these differences. Visual perspective is associated with clinically-relevant constructs and, although associated with the memory's phenomenology, perspective does not shape it. PMID:20665336

  15. Meeting report for the 1st skin microbiota workshop, boulder, CO October 15-16 2012

    PubMed Central

    2014-01-01

    This report details the outcome of the 1st Skin Microbiota Workshop, Boulder, CO, held on October 15th-16th 2012. The workshop was arranged to bring Department of Defense personnel together with experts in microbial ecology, human skin physiology and anatomy, and computational techniques for interrogating the microbiome to define research frontiers at the intersection of these important areas. The workshop outlined a series of questions and created several working groups to address those questions, specifically to promote interdisciplinary activity and potential future collaboration. The US Army provided generous grant support and the meeting was organized and hosted by the University of Colorado at Boulder. A primary forward vision of the meeting was the importance of understanding skin microbial communities to improve the health and stealth of US Army warfighters.

  16. Statistical Ring Opening Metathesis Copolymerization of Norbornene and Cyclopentene by Grubbs' 1st-Generation Catalyst.

    PubMed

    Nikovia, Christiana; Maroudas, Andreas-Philippos; Goulis, Panagiotis; Tzimis, Dionysios; Paraskevopoulou, Patrina; Pitsikalis, Marinos

    2015-01-01

    Statistical copolymers of norbornene (NBE) with cyclopentene (CP) were prepared by ring-opening metathesis polymerization, employing the 1st-generation Grubbs' catalyst, in the presence or absence of triphenylphosphine, PPh₃. The reactivity ratios were estimated using the Finemann-Ross, inverted Finemann-Ross, and Kelen-Tüdos graphical methods, along with the computer program COPOINT, which evaluates the parameters of binary copolymerizations from comonomer/copolymer composition data by integrating a given copolymerization equation in its differential form. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions and the mean sequence length, which were derived using the monomer reactivity ratios. The kinetics of thermal decomposition of the copolymers along with the respective homopolymers was studied by thermogravimetric analysis within the framework of the Ozawa-Flynn-Wall and Kissinger methodologies. Finally, the effect of triphenylphosphine on the kinetics of copolymerization, the reactivity ratios, and the kinetics of thermal decomposition were examined. PMID:26343620

  17. PREFACE: PAGES 1st Young Scientists Meeting (YSM) - 'Retrospective views on our planet's future'

    NASA Astrophysics Data System (ADS)

    Cléroux, Caroline; Fehrenbacher, Jennifer; Phipps, Steven; Rupper, Summer; Williams, Branwen; Kiefer, Thorsten

    2010-03-01

    more recent pollution. The concept and format of the 1st PAGES YSM worked very well, and created a high degree of enthusiasm and stimulation among the participants (as is demonstrated by this special issue). The 2nd YSM is therefore firmly planned to take place in 2013, back-to-back with the 4th PAGES OSM. Crucial and gratefully acknowledged contributions to the success of the YSM were made by the numerous co-sponsors (see logos below), who provided the financial basis for the YSM and supported the attendance of many early-career researchers from various parts of the world. Furthermore, we cordially thank all reviewers for shaping this proceeding issue with their insightful and helpful reviews. Conference photograph

  18. Two-component energy spectrum of cuprates in the pseudogap phase and its evolution with temperature and at charge ordering

    PubMed Central

    Gor'kov, Lev P.; Teitel'baum, Gregory B.

    2015-01-01

    In the search for mechanisms of high-temperature superconductivity it is critical to know the electronic spectrum in the pseudogap phase from which superconductivity evolves. The lack of angle-resolved photoemission data for every cuprate family precludes an agreement as to its structure, doping and temperature dependence and the role of charge ordering. Here we show that, in the entire Fermi-liquid-like regime that is ubiquitous in underdoped cuprates, the spectrum consists of holes on the Fermi arcs and an electronic pocket. We argue that experiments on the Hall coefficient identify the latter as a permanent feature at doped hole concentration x > 0.08–0.10, in contrast to the idea of the Fermi surface reconstruction via charge ordering. The longstanding issue of the origin of the negative Hall coefficient in YBCO and Hg1201 at low temperature is resolved: the electronic contribution prevails as mobility of the latter (evaluated by the Dingle temperature) becomes temperature independent, while the mobility of holes scattered by the short-wavelength charge density waves decreases. PMID:25688011

  19. Two-component energy spectrum of cuprates in the pseudogap phase and its evolution with temperature and at charge ordering.

    PubMed

    Gor'kov, Lev P; Teitel'baum, Gregory B

    2015-01-01

    In the search for mechanisms of high-temperature superconductivity it is critical to know the electronic spectrum in the pseudogap phase from which superconductivity evolves. The lack of angle-resolved photoemission data for every cuprate family precludes an agreement as to its structure, doping and temperature dependence and the role of charge ordering. Here we show that, in the entire Fermi-liquid-like regime that is ubiquitous in underdoped cuprates, the spectrum consists of holes on the Fermi arcs and an electronic pocket. We argue that experiments on the Hall coefficient identify the latter as a permanent feature at doped hole concentration x > 0.08-0.10, in contrast to the idea of the Fermi surface reconstruction via charge ordering. The longstanding issue of the origin of the negative Hall coefficient in YBCO and Hg1201 at low temperature is resolved: the electronic contribution prevails as mobility of the latter (evaluated by the Dingle temperature) becomes temperature independent, while the mobility of holes scattered by the short-wavelength charge density waves decreases. PMID:25688011

  20. Second-Order Inelastic Dynamic Analysis of 3D Semi-Rigid Steel Frames Under Earthquake Loads with Three Components

    SciTech Connect

    Ozakgul, Kadir

    2008-07-08

    In this study, it has been presented an algorithm for second-order elastoplastic dynamic time-history analysis of three dimensional frames that have steel members with semirigid joints. The proposed analysis accounts for material, geometric and connection nonlinearities. Material nonlinearity have been modeled by the Ramberg-Osgood relation. While the geometric nonlinearity caused by axial force has been described by the use of the geometric stiffness matrix, the nonlinearity caused by the interaction between the axial force and bending moment has been also described by the use of the stability functions. The independent hardening model has been used to describe the nonlinear behaviour of semi-rigid connections. Dynamic equation of motion has been solved by Newmark's constant acceleration method in time history domain.

  1. PREFACE: 1st International Conference on Rheology and Modeling of Materials

    NASA Astrophysics Data System (ADS)

    Gömze, László A.

    2015-04-01

    Understanding the rheological properties of materials and their rheological behaviors during their manufacturing processes and in their applications in many cases can help to increase the efficiency and competitiveness not only of the finished goods and products but the organizations and societies also. The more scientific supported and prepared organizations develop more competitive products with better thermal, mechanical, physical, chemical and biological properties and the leading companies apply more competitive knowledge, materials, equipment and technology processes. The idea to organize in Hungary the 1st International Conference on Rheology and Modeling of Materials we have received from prospective scientists, physicists, chemists, mathematicians and engineers from Asia, Europe, North and South America including India, Korea, Russia, Turkey, Estonia, France, Italy, United Kingdom, Chile, Mexico and USA. The goals of ic-rmm1 the 1st International Conference on Rheology and Modeling of Materials are the following: • Promote new methods and results of scientific research in the fields of modeling and measurements of rheological properties and behavior of materials under processing and applications. • Change information between the theoretical and applied sciences as well as technical and technological implantations. • Promote the communication between the scientists of different disciplines, nations, countries and continents. The international conference ic-rmm1 provides a platform among the leading international scientists, researchers, PhD students and engineers for discussing recent achievements in measurement, modeling and application of rheology in materials technology and materials science of liquids, melts, solids, crystals and amorphous structures. Among the major fields of interest are the influences of material structures, mechanical stresses temperature and deformation speeds on rheological and physical properties, phase transformation of

  2. Method and software for using m-sequences to characterize parallel components of higher-order visual tracking behavior in Drosophila.

    PubMed

    Aptekar, Jacob W; Keles, Mehmet F; Mongeau, Jean-Michel; Lu, Patrick M; Frye, Mark A; Shoemaker, Patrick A

    2014-01-01

    A moving visual figure may contain first-order signals defined by variation in mean luminance, as well as second-order signals defined by constant mean luminance and variation in luminance envelope, or higher-order signals that cannot be estimated by taking higher moments of the luminance distribution. Separating these properties of a moving figure to experimentally probe the visual subsystems that encode them is technically challenging and has resulted in debated mechanisms of visual object detection by flies. Our prior work took a white noise systems identification approach using a commercially available electronic display system to characterize the spatial variation in the temporal dynamics of two distinct subsystems for first- and higher-order components of visual figure tracking. The method relied on the use of single pixel displacements of two visual stimuli according to two binary maximum length shift register sequences (m-sequences) and cross-correlation of each m-sequence with time-varying flight steering measurements. The resultant spatio-temporal action fields represent temporal impulse responses parameterized by the azimuthal location of the visual figure, one STAF for first-order and another for higher-order components of compound stimuli. Here we review m-sequence and reverse correlation procedures, then describe our application in detail, provide Matlab code, validate the STAFs, and demonstrate the utility and robustness of STAFs by predicting the results of other published experimental procedures. This method has demonstrated how two relatively modest innovations on classical white noise analysis--the inclusion of space as a way to organize response kernels and the use of linear decoupling to measure the response to two channels of visual information simultaneously--could substantially improve our basic understanding of visual processing in the fly. PMID:25400550

  3. Method and software for using m-sequences to characterize parallel components of higher-order visual tracking behavior in Drosophila

    PubMed Central

    Aptekar, Jacob W.; Keles, Mehmet F.; Mongeau, Jean-Michel; Lu, Patrick M.; Frye, Mark A.; Shoemaker, Patrick A.

    2014-01-01

    A moving visual figure may contain first-order signals defined by variation in mean luminance, as well as second-order signals defined by constant mean luminance and variation in luminance envelope, or higher-order signals that cannot be estimated by taking higher moments of the luminance distribution. Separating these properties of a moving figure to experimentally probe the visual subsystems that encode them is technically challenging and has resulted in debated mechanisms of visual object detection by flies. Our prior work took a white noise systems identification approach using a commercially available electronic display system to characterize the spatial variation in the temporal dynamics of two distinct subsystems for first- and higher-order components of visual figure tracking. The method relied on the use of single pixel displacements of two visual stimuli according to two binary maximum length shift register sequences (m-sequences) and cross-correlation of each m-sequence with time-varying flight steering measurements. The resultant spatio-temporal action fields represent temporal impulse responses parameterized by the azimuthal location of the visual figure, one STAF for first-order and another for higher-order components of compound stimuli. Here we review m-sequence and reverse correlation procedures, then describe our application in detail, provide Matlab code, validate the STAFs, and demonstrate the utility and robustness of STAFs by predicting the results of other published experimental procedures. This method has demonstrated how two relatively modest innovations on classical white noise analysis—the inclusion of space as a way to organize response kernels and the use of linear decoupling to measure the response to two channels of visual information simultaneously—could substantially improve our basic understanding of visual processing in the fly. PMID:25400550

  4. HWMA/RCRA CLOSURE PLAN FOR THE MATERIALS TEST REACTOR WING (TRA-604) LABORATORY COMPONENTS VOLUNTARY CONSENT ORDER ACTION PLAN VCO-5.8 D REVISION2

    SciTech Connect

    KIRK WINTERHOLLER

    2008-02-25

    This Hazardous Waste Management Act/Resource Conservation and Recovery Act closure plan was developed for the laboratory components of the Test Reactor Area Catch Tank System (TRA-630) that are located in the Materials Test Reactor Wing (TRA-604) at the Reactor Technology Complex, Idaho National Laboratory Site, to meet a further milestone established under Voluntary Consent Order Action Plan VCO-5.8.d. The TRA-604 laboratory components addressed in this closure plan were deferred from the TRA-630 Catch Tank System closure plan due to ongoing laboratory operations in the areas requiring closure actions. The TRA-604 laboratory components include the TRA-604 laboratory warm wastewater drain piping, undersink drains, subheaders, and the east TRA-604 laboratory drain header. Potentially contaminated surfaces located beneath the TRA-604 laboratory warm wastewater drain piping and beneath the island sinks located in Laboratories 126 and 128 (located in TRA-661) are also addressed in this closure plan. The TRA-604 laboratory components will be closed in accordance with the interim status requirements of the Hazardous Waste Management Act/Resource Conservation and Recovery Act as implemented by the Idaho Administrative Procedures Act 58.01.05.009 and 40 Code of Federal Regulations 265, Subparts G and J. This closure plan presents the closure performance standards and the methods for achieving those standards.

  5. 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop: April 5-7, 2011

    SciTech Connect

    Not Available

    2011-10-01

    The U.S. marine energy industry is actively pursuing development of offshore wind and marine hydrokinetic (MHK) energy systems. Experience in the wind energy sector demonstrates that new technology development requires thorough measurement and characterization of the environmental conditions prevalent at installation sites and of technology operating in the field. Presently, there are no turn-key instrumentation system solutions that meet the measurement needs of the marine energy industry. The 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop brought together technical experts from government laboratories, academia, and industry representatives from marine energy, wind, offshore oil and gas, and instrumentation developers to present and discuss the instrumentation needs of the marine energy industry. The goals of the meeting were to: (1) Share the latest relevant knowledge among technical experts; (2) Review relevant state-of-the-art field measurement technologies and methods; (3) Review lessons learned from recent field deployments; (4) Identify synergies across different industries; (5) Identify gaps between existing and needed instrumentation capabilities; (6) Understand who are the leading experts; (7) Provide a forum where stakeholders from the marine energy industry could provide substantive input in the development of new marine energy field deployable instrumentation packages.

  6. Wind-US Results for the AIAA 1st Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Yoder, Dennis; Dippold, Vance, III; Georgiadis, Nicholas

    2012-01-01

    This presentation contains Wind-US results presented at the 1st Propulsion Aerodynamics Workshop. The The workshop was organized by the American Institute of Aeronautics and Astronautics, Air Breathing Propulsion Propulsion Systems Integration Technical Committee with the purpose of assessing the accuracy of computational computational fluid dynamics for air breathing propulsion applications. Attendees included representatives from representatives from government, industry, academia, and commercial software companies. Participants were were encouraged to explore and discuss all aspects of the simulation process including the effects of mesh type and mesh type and refinement, solver numerical schemes, and turbulence modeling. The first set of challenge cases involved computing the thrust and discharge coefficients for a series of convergent convergent nozzles for a range of nozzle pressure ratios between 1.4 and 7.0. These configurations included a included a reference axisymmetric nozzle as well as 15deg , 25deg , and 40deg conical nozzles. Participants were also asked also asked to examine the plume shock structure for two cases where the 25deg conical nozzle was bifurcated by a bifurcated by a solid plate. The final test case was a serpentine inlet diffuser with an outlet to inlet area ratio of 1.52 ratio of 1.52 and an offset of 1.34 times the inlet diameter. Boundary layer profiles, wall static pressure, and total and total pressure at downstream rake locations were examined.

  7. [POPIN Advisory Committee, 1st session. Geneva, March 22-25, 1982: report].

    PubMed

    1982-09-01

    A report of the POPIN, (International Population Information Network), Advisory Committee on its 1st session. The chairman presented a progress report on the activities of the Network in general and the POPIN coordinating unit in particular. More active participation by the developing countries was stressed to share information. The working group reported the efforts made by various groups for the translation of the population multilingual thesaurus into other languages. It also reviewed the draft manuscript on inventory and evaluation of training materials to identify gaps and make suggestions for improvement. The advisory committee suggested the development of a series of shorter guides which would deal with specific subjects. The development of a common classification scheme was considered of utmost importance since it would facilitate the processing, retrieval and exchange of information. A proposed work plan for 1983 and 1984 was discussed. This included publication of the POPIN Bulletin and newsletter, preparation of documentations for the sessions of the Advisory Committee, publication of the specific guides and a directory of POPIN members. Recommendations of the committee included measures for expansion of membership, publication of Popline multilingual thesaurus and guides for specific subjects. The committee considered and adopted the recommendations. Annexes include, 1) list of participants, documents and agenda, 2) recommendations of the POPIN working group on the management of the population multilingual thesaurus, and 3) recommendations on the inventory and evaluation of teaching materials for population information services. PMID:12279381

  8. The relation between 1st grade grey matter volume and 2nd grade math competence.

    PubMed

    Price, Gavin R; Wilkey, Eric D; Yeo, Darren J; Cutting, Laurie E

    2016-01-01

    Mathematical and numerical competence is a critical foundation for individual success in modern society yet the neurobiological sources of individual differences in math competence are poorly understood. Neuroimaging research over the last decade suggests that neural mechanisms in the parietal lobe, particularly the intraparietal sulcus (IPS) are structurally aberrant in individuals with mathematical learning disabilities. However, whether those same brain regions underlie individual differences in math performance across the full range of math abilities is unknown. Furthermore, previous studies have been exclusively cross-sectional, making it unclear whether variations in the structure of the IPS are caused by or consequences of the development of math skills. The present study investigates the relation between grey matter volume across the whole brain and math competence longitudinally in a representative sample of 50 elementary school children. Results show that grey matter volume in the left IPS at the end of 1st grade relates to math competence a year later at the end of 2nd grade. Grey matter volume in this region did not change over that year, and was still correlated with math competence at the end of 2nd grade. These findings support the hypothesis that the IPS and its associated functions represent a critical foundation for the acquisition of mathematical competence. PMID:26334946

  9. The Two-Component Camassa-Holm Equations CH(2,1) and CH(2,2): First-Order Integrating Factors and Conservation Laws

    NASA Astrophysics Data System (ADS)

    Euler, Marianna; Euler, Norbert; Wolf, Thomas

    2012-10-01

    Recently, Holm and Ivanov, proposed and studied a class of multi-component generalizations of the Camassa-Holm equations [D. D. Holm and R. I. Ivanov, Multi-component generalizations of the CH equation: geometrical aspects, peakons and numerical examples, J. Phys A: Math. Theor.43 (2010) 492001 (20pp)]. We consider two of those systems, denoted by Holm and Ivanov by CH(2,1) and CH(2,2), and report a class of integrating factors and its corresponding conservation laws for these two systems. In particular, we obtain the complete set of first-order integrating factors for the systems in Cauchy-Kovalevskaya form and evaluate the corresponding sets of conservation laws for CH(2,1) and CH(2,2).

  10. Jordanian Kindergarten and 1st-Grade Teachers' Beliefs about Child-Based Dimensions of School Readiness

    ERIC Educational Resources Information Center

    Fayez, Merfat; Ahmad, Jamal Fathi; Oliemat, Enass

    2016-01-01

    The purpose of this study was to explore the beliefs of Jordanian kindergarten and 1st-grade teachers regarding six child-based dimensions of school readiness: academic knowledge, basic thinking skills, socioemotional maturity, physical well-being and motor development, self-discipline, and communication skills. Questionnaires were used to collect…

  11. Laying a Foundation for Lifelong Learning: Case Studies of E-Assessment in Large 1st-Year Classes

    ERIC Educational Resources Information Center

    Nicol, David

    2007-01-01

    Concerns about noncompletion and the quality of the 1st-year student experience have been linked to recent changes in higher education such as modularisation, increased class sizes, greater diversity in the student intake and reduced resources. Improving formative assessment and feedback processes is seen as one way of addressing academic failure,…

  12. 78 FR 7781 - Filing Dates for the South Carolina Special Elections in the 1st Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-04

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the South Carolina Special Elections in the 1st Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special elections. SUMMARY: South Carolina...

  13. Addressing the Effects of Reciprocal Teaching on the Receptive and Expressive Vocabulary of 1st-Grade Students

    ERIC Educational Resources Information Center

    Mandel, Eliana; Osana, Helena P.; Venkatesh, Vivek

    2013-01-01

    This study evaluated the effects of Adapted Reciprocal Teaching (ART) on the receptive and expressive flight-word vocabulary of 1st-grade students. During ART, classroom interactions produced narrative contexts within which students assumed responsibility for applying new flight words in personally meaningful ways. Students in the control group…

  14. Foreword to Selected presentations from the 1st European Hip Sport Meeting.

    PubMed

    Dallari, Dante; Ribas, Manuel

    2016-05-14

    Recent years have witnessed a growing number of people practising sports both at professional and amateur level. This trend led to a progressive rise in the incidence and prevalence of acute and chronic hip damage. The treatment of hip disease in subjects practising sports is a major challenge for the orthopaedic surgeon. The evaluation of patients, in particular those of young age with high functional demands, is inevitably complex and should be performed with a multidisciplinary approach; from a surgical point of view, it is essential to carefully assess whether the indication is towards conservative surgery or hip replacement surgery. The advent of arthroscopic surgery in recent years has allowed us to improve our knowledge of hip joint diseases, such as femoroacetabular impingement that is typical of sports and overuse activity. A correct and early diagnosis of the disease can direct the patient promptly to a conservative surgical treatment that could reduce the progression of degenerative pathology. However, when the joint is permanently damaged, the only reliable solution remains prosthetic surgery, leading to a series of issues that the orthopaedic surgeon should be able to master, leading to a thoughtful decision on, for example, which implant to use, which biomaterials, which surgical approach or which sport to practise after surgery. This supplement contains selected contributions stemming from the work performed by internationally recognised experts in the field and presented during the 1st European Hip Sport Meeting held in Bologna on May 19th, 20th, 2016 that we had the honour to co-chair. We hope that these contributions will help the orthopaedic surgeon, the sports physician and physiotherapist in their day-to-day practice, and will help in fulfilling our ultimate aim to improve the knowledge of the hip pathology related to sports and overuse activities. PMID:27174057

  15. PREFACE: 1st Conference on Light and Particle Beams in Materials Science 2013 (LPBMS2013)

    NASA Astrophysics Data System (ADS)

    Kumai, Reiji; Murakami, Youichi

    2014-04-01

    From 29-31 August 2013, the 1st International Conference on Light and Particle Beams in Materials Science, LPBMS 2013, took place in the Tsukuba International Congress Center in the city of Tsukuba, Japan. The conference was a continuation of the international series Synchrotron Radiation in Materials Science (SRMS), which started in 1994. The last one, SRMS-7, was held in Oxford UK 11-14 July 2010, where the International Advisory Committee (IAC) recommended the conference be enlarged to incorporate Materials Research from Neutron, Muon, and Slow Positron Sources, as well as the science emerging from Synchrotron Light Sources. The conference brought together contributions from academics and industrial researchers with a diverse background and experience from the physics, chemistry and engineering communities. The topics covered in the LPBMS2013 include strongly correlated electron systems, magnetism and magnetic materials, soft matter, interface and surface defects, catalysts, biomaterials, and ceramics. In the 3-day scientific program, the conference consisted of 9 plenary talks, 33 invited talks, 20 oral presentations, and 126 poster presentations. We are pleased to publish the proceedings of the LPBMS2013 in this volume of Journal of Physics: Conference Series. This volume contains 58 papers representing the work that was presented and discussed at the conference. We hope that this volume will promote further development of this interdisciplinary materials research emerging from synchrotron light, neutron, muon, and slow positron sciences. Finally, we would like to thank the International Advisory Committee (Chair: Professor G N Greaves), sponsors, all the participants and contributors for making possible this international meeting of researchers. Reiji Kumai & Youichi Murakami Conference photograph Details of the program and organizing committees are available in the pdf

  16. Computational Simulations of Convergent Nozzles for the AIAA 1st Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Dippold, Vance F., III

    2014-01-01

    Computational Fluid Dynamics (CFD) simulations were completed for a series of convergent nozzles in participation of the American Institute of Aeronautics and Astronautics (AIAA) 1st Propulsion Aerodynamics Workshop. The simulations were performed using the Wind-US flow solver. Discharge and thrust coefficients were computed for four axisymmetric nozzles with nozzle pressure ratios (NPR) ranging from 1.4 to 7.0. The computed discharge coefficients showed excellent agreement with available experimental data; the computed thrust coefficients captured trends observed in the experimental data, but over-predicted the thrust coefficient by 0.25 to 1.0 percent. Sonic lines were computed for cases with NPR >= 2.0 and agreed well with experimental data for NPR >= 2.5. Simulations were also performed for a 25 deg. conic nozzle bifurcated by a flat plate at NPR = 4.0. The jet plume shock structure was compared with and without the splitter plate to the experimental data. The Wind-US simulations predicted the shock structure well, though lack of grid resolution in the plume reduced the sharpness of the shock waves. Unsteady Reynolds-Averaged Navier-Stokes (URANS) simulations and Detached Eddy Simulations (DES) were performed at NPR = 1.6 for the 25 deg conic nozzle with splitter plate. The simulations predicted vortex shedding from the trailing edge of the splitter plate. However, the vortices of URANS and DES solutions appeared to dissipate earlier than observed experimentally. It is believed that a lack of grid resolution in the region of the vortex shedding may have caused the vortices to break down too soon

  17. Patterns of Irregular Burials in Western Europe (1st-5th Century A.D.)

    PubMed Central

    Milella, Marco; Mariotti, Valentina; Belcastro, Maria Giovanna; Knüsel, Christopher J.

    2015-01-01

    Background Irregular burials (IB—burials showing features that contrast with the majority of others in their geographic and chronological context) have been the focus of archaeological study because of their relative rarity and enigmatic appearance. Interpretations of IB often refer to supposed fear of the dead or to social processes taking place in time-specific contexts. However, a comprehensive and quantitative analysis of IB for various geographical contexts is still lacking, a fact that hampers any discussion of these burials on a larger scale. Methods Here, we collected a bibliographic dataset of 375 IB from both Britain and Continental Europe, altogether spanning a time period from the 1st to the 5th century AD. Each burial has been coded according to ten dichotomous variables, further analyzed by means of chi-squared tests on absolute frequencies, non-metric multidimensional scaling, and cluster analysis. Results Even acknowledging the limits of this study, and in particular the bias represented by the available literature, our results point to interesting patterns. Geographically, IB show a contrast between Britain and Continental Europe, possibly related to historical processes specific to these regions. Different types of IB (especially prone depositions and depositions with the cephalic extremity displaced) present a series of characteristics and associations between features that permit a more detailed conceptualization of these occurrences from a socio-cultural perspective that aids to elucidate their funerary meaning. Conclusions and Significance Altogether, the present work stresses the variability of IB, and the need to contextualize them in a proper archaeological and historical context. It contributes to the discussion of IB by providing a specific geographic and chronological frame of reference that supports a series of hypotheses about the cultural processes possibly underlying their occurrence. PMID:26115408

  18. 78 FR 39255 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Advance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-01

    ... Countervailing Duty Orders; Policy Bulletin, 63 FR 18871 (April 16, 1998). The Notice of Initiation of Five-Year... Magnets from Jennifer Moats China (A-570-922) (1st (202) 482-5047 Review). Raw Flexible Magnets from David... Magnets from Jennifer Moats China (C-570-923) (1st (202) 482-5047 Review). Suspended Investigations...

  19. Adaptive and Effortful Control and Academic Self-Efficacy Beliefs on Achievement: A Longitudinal Study of 1st through 3rd Graders

    ERIC Educational Resources Information Center

    Liew, Jeffrey; McTigue, Erin M.; Barrois, Lisa; Hughes, Jan N.

    2008-01-01

    The linkages between self-regulatory processes and achievement were examined across 3 years in 733 children beginning at 1st grade (M = 6.57 years, S.D. = 0.39 at 1st grade) who were identified as lower achieving in literacy. Accounting for consistencies in measures (from 1 year prior) and for influences of child's age, gender, IQ, ethnicity and…

  20. Experience from the 1st Year running a Massive High Quality Videoconferencing Service for the LHC

    NASA Astrophysics Data System (ADS)

    Fernandes, Joao; Baron, Thomas; Bompastor, Bruno

    2014-06-01

    In the last few years, we have witnessed an explosion of visual collaboration initiatives in the industry. Several advances in video services and also in their underlying infrastructure are currently improving the way people collaborate globally. These advances are creating new usage paradigms: any device in any network can be used to collaborate, in most cases with an overall high quality. To keep apace with this technology progression, the CERN IT Department launched a service based on the Vidyo product. This new service architecture introduces Adaptive Video Layering, which dynamically optimizes the video for each endpoint by leveraging the H.264 Scalable Video Coding (SVC)-based compression technology. It combines intelligent AV routing techniques with the flexibility of H.264 SVC video compression, in order to achieve resilient video collaboration over the Internet, 3G and WiFi. We present an overview of the results that have been achieved after this major change. In particular, the first year of operation of the CERN Vidyo service will be described in terms of performance and scale: The service became part of the daily activity of the LHC collaborations, reaching a monthly usage of more than 3200 meetings with a peak of 750 simultaneous connections. We also present some key features such as the integration with CERN Indico. LHC users can now join a Vidyo meeting either from their personal computer or a CERN videoconference room simply from an Indico event page, with the ease of a single click. The roadmap for future improvements, service extensions and core infrastructure tendencies such as cloud based services and virtualization of system components will also be discussed. Vidyo's strengths allowed us to build a universal service (it is accessible from PCs, but also videoconference rooms, traditional phones, tablets and smartphones), developed with 3 key ideas in mind: ease of use, full integration and high quality.

  1. Effects of the April 1st, 2014 GLONASS Outage on GNSS Receivers

    NASA Astrophysics Data System (ADS)

    Blume, F.; Berglund, H. T.; Romero, I.; D'Anastasio, E.

    2014-12-01

    The use of multi-constellation GNSS receivers has been assumed as a way to increase system integrity both by increased coverage during normal operations and failover redundancy in the event of a constellation failure. At approximately 21:00 UTC on April 1st the entire GLONASS constellation was disrupted as illegal ephemeris uploaded to each satellite took effect simultaneously. The outage continued for more than 10 hours. While ephemeris were incorrect, pseudoranges were correctly broadcast on both L1 and L2 and carrier phases were not affected; in the best case, GNSS receivers could be expected to continue to track all signals including GLONASS and at the worst to continue to track GPS and other constellations. It became clear to operators of the GeoNet network in New Zealand that the majority of their 79 GLONASS-enabled receivers experienced total tracking failures. Further detailed analysis of data from these and 315 additional GLONASS-enabled stations worldwide showed that receiver tracking behavior was affected for most receiver brands and models, both for GLONASS and GPS. Findings regarding the impacts of the GLONASS outage on receiver behavior will be highlighted. We use data recorded by GLONASS enabled global sites for the days during, preceding and following the outage to evaluate the impact of the outage on tracking and positioning performance. We observe that for some receiver types the onboard receiver autonomous integrity monitoring (RAIM) failed to ignore the incorrect messages, resulting in degraded GLONASS and GPS tracking and in some cases complete tracking failures and significant data loss. In addition, many of the receivers with clock steering enabled showed outliers in their receiver clock bias estimates that also coincided with the outage. Our results show in detail how different brands, configurations, and distributions of receivers were affected to varying extents, but no common factors are apparent. This event shows that many manufacturers

  2. PREFACE: 1st International Conference on Mechanical Engineering Research 2011 (ICMER2011)

    NASA Astrophysics Data System (ADS)

    Abu Bakar, Rosli

    2012-09-01

    The year 2010 represented a significant milestone in the history of the Mechanical Engineering community with the organization of the first and second national level conferences (National Conference in Mechanical Engineering for Research, 1st and 2nd NCMER) at Universiti Malaysia Pahang on 26-27 May and 3-4 December 2010. The conferences attracted a large number of delegates from different premier academic and research institutions in the country to participate and share their research experiences at the conference. The International Conference on Mechanical Engineering Research (ICMER 2011) followed on from the first and second conferences due to good support from researchers. The ICMER 2011 is a good platform for researchers and postgraduate students to present their latest finding in research. The conference covers a wide range of topics including the internal combustion engine, machining processes, heat and mass transfer, fuel, biomechanical analysis, aerodynamic analysis, thermal comfort, computational techniques, design and simulation, automotive transmission, optimization techniques, hybrid electric vehicles, engine vibration, heat exchangers, finite element analysis, computational fluid dynamics, green energy, vehicle dynamics renewable energy, combustion, design, product development, advanced experimentation techniques, to name but a few. The international conference has helped to bridge the gap between researchers working at different institutions and in different countries to share their knowledge and has helped to motivate young scientists with their research. This has also given some clear direction for further research from the deliberations of the conference. Several people have contributed in different ways to the success of the conference. We thank the keynote speakers and all authors of the contributed papers, for the cooperation rendered to us in the publication of the CD conference proceedings. In particular, we would like to place on record our

  3. PREFACE: 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies

    NASA Astrophysics Data System (ADS)

    Shuja Syed, Ahmed

    2013-12-01

    The 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies (ICSICCST-2013), took place in Karachi, Pakistan, from 24-26 June 2013. It was organized by Indus University, Karachi, in collaboration with HEJ Research Institute of Chemistry, University of Karachi, Karachi. More than 80 abstracts were submitted to the conference and were double blind-reviewed by an international scientific committee. The topics of the Conference were: Video, Image & Voice Sensing Sensing for Industry, Environment, and Health Automation and Controls Laser Sensors and Systems Displays for Innovative Applications Emerging Technologies Unmanned, Robotic, and Layered Systems Sensing for Defense, Homeland Security, and Law Enforcement The title of the conference, 'Sensing for Industry, Control, Communication & Security Technologies' is very apt in capturing the main issues facing the industry of Pakistan and the world. We believe the sensing industry, particularly in Pakistan, is currently at a critical juncture of its development. The future of the industry will depend on how the industry players choose to respond to the challenge of global competition and opportunities arising from strong growth in the Asian region for which we are pleased to note that the conference covered a comprehensive spectrum of issues with an international perspective. This will certainly assist industry players to make informed decisions in shaping the future of the industry. The conference gathered qualified researchers from developed countries like USA, UK, Sweden, Saudi Arabia, China, South Korea and Malaysia etc whose expertise resulting from the research can be drawn upon to build an exploitable area of new technology that has potential Defense, Homeland Security, and Military applicability. More than 250 researchers/students attended the event and made the event great success as the turnout was 100%. An exceptional line-up of speakers spoke at the occasion. We want

  4. PREFACE: 1st-2nd Young Researchers Meetings in Rome - Proceedings

    NASA Astrophysics Data System (ADS)

    YRMR Organizing Committee; Cannuccia, E.; Mazzaferro, L.; Migliaccio, M.; Pietrobon, D.; Stellato, F.; Veneziani, M.

    2011-03-01

    Students in science, particularly in physics, face a fascinating and challenging future. Scientists have proposed very interesting theories, which describe the microscopic and macroscopic world fairly well, trying to match the quantum regime with cosmological scales. Between the extremes of this scenario, biological phenomena in all their complexity take place, challenging the laws we observe in the atomic and sub-atomic world. More and more accurate and complex experiments have been devised and these are now going to test the paradigms of physics. Notable experiments include: the Large Hadronic Collider (LHC), which is going to shed light on the physics of the Standard Model of Particles and its extensions; the Planck-Herschel satellites, which target a very precise measurement of the properties of our Universe; and the Free Electron Lasers facilities, which produce high-brilliance, ultrafast X-ray pulses, allowing the investigation of the fundamental processes of solid state physics, chemistry, and biology. These projects are the result of huge collaborations spread across the world, involving scientists belonging to different and complementary research fields: physicists, chemists, biologists and others, keen to make the best of these extraordinary laboratories. Even though each branch of science is experiencing a process of growing specialization, it is very important to keep an eye on the global picture, remaining aware of the deep interconnections between inherent fields. This is even more crucial for students who are beginning their research careers. These considerations motivated PhD students and young post-docs connected to the Roman scientific research area to organize a conference, to establish the background and the network for interactions and collaborations. This resulted in the 1st and 2nd Young Researchers Meetings in Rome (http://ryrm.roma2.infn.it), one day conferences aimed primarily at graduate students and post-docs, working in physics in Italy

  5. Natural gas leak location with K-L divergence-based adaptive selection of Ensemble Local Mean Decomposition components and high-order ambiguity function

    NASA Astrophysics Data System (ADS)

    Sun, Jiedi; Xiao, Qiyang; Wen, Jiangtao; Zhang, Ying

    2015-07-01

    In this study, a time-delay estimation method based on Ensemble Local Mean Decomposition (ELMD) method and high-order ambiguity function (HAF) is proposed for locating natural gas pipeline leaks. The leakage signals were decomposed using ELMD, and numerous production functions (PFs) were obtained. An adaptive selection method based on Kullback-Leibler (K-L) divergence was proposed to process these PF components and choose the characteristic PFs that contain most of the leakage information. The HAF was employed to analyze the instantaneous parameters of the characteristic PFs and calculate the difference in arrival time of characteristic frequencies. From the time difference and the signal propagation speed, the natural gas pipeline leakage location can be determined. The experiment results show that the proposed method can locate leaks with higher accuracy than cross-correlation method.

  6. Teachers' Spatial Anxiety Relates to 1st-and 2nd-Graders' Spatial Learning

    ERIC Educational Resources Information Center

    Gunderson, Elizabeth A.; Ramirez, Gerardo; Beilock, Sian L.; Levine, Susan C.

    2013-01-01

    Teachers' anxiety about an academic domain, such as math, can impact students' learning in that domain. We asked whether this relation held in the domain of spatial skill, given the importance of spatial skill for success in math and science and its malleability at a young age. We measured 1st-and 2nd-grade teachers' spatial anxiety…

  7. Gene-Environment Interaction Effects on the Development of Immune Responses in the 1st Year of Life

    PubMed Central

    Hoffjan, Sabine; Nicolae, Dan; Ostrovnaya, Irina; Roberg, Kathy; Evans, Michael; Mirel, Daniel B.; Steiner, Lori; Walker, Karen; Shult, Peter; Gangnon, Ronald E.; Gern, James E.; Martinez, Fernando D.; Lemanske, Robert F.; Ober, Carole

    2005-01-01

    Asthma is a common disease that results from both genetic and environmental risk factors. Children attending day care in the 1st year of life have lower risks for developing asthma, although the mechanism for this “day care” effect is largely unknown. We investigated the interactions between day care exposure in the 1st 6 mo of life and genotypes for 72 polymorphisms at 45 candidate loci and their effects on cytokine response profiles and on the development of atopic phenotypes in the 1st year of life in the Childhood Onset of Asthma (COAST) cohort of children. Six interactions (at four polymorphisms in three loci) with “day care” that had an effect on early-life immune phenotypes were significant at P<.001. The estimated false-discovery rate was 33%, indicating that an estimated four P values correspond to true associations. Moreover, the “day care” effect at some loci was accounted for by the increased number of viral infections among COAST children attending day care, whereas interactions at other loci were independent of the number of viral infections, indicating the presence of additional risk factors associated with day care environment. This study identified significant gene-environment interactions influencing the early patterning of the immune system and the subsequent development of asthma and highlights the importance of considering environmental risk factors in genetic analyses. PMID:15726497

  8. Toward Realistic Simulation of low-Level Clouds Using a Multiscale Modeling Framework With a Third-Order Turbulence Closure in its Cloud-Resolving Model Component

    NASA Technical Reports Server (NTRS)

    Xu, Kuan-Man; Cheng, Anning

    2010-01-01

    This study presents preliminary results from a multiscale modeling framework (MMF) with an advanced third-order turbulence closure in its cloud-resolving model (CRM) component. In the original MMF, the Community Atmosphere Model (CAM3.5) is used as the host general circulation model (GCM), and the System for Atmospheric Modeling with a first-order turbulence closure is used as the CRM for representing cloud processes in each grid box of the GCM. The results of annual and seasonal means and diurnal variability are compared between the modified and original MMFs and the CAM3.5. The global distributions of low-level cloud amounts and precipitation and the amounts of low-level clouds in the subtropics and middle-level clouds in mid-latitude storm track regions in the modified MMF show substantial improvement relative to the original MMF when both are compared to observations. Some improvements can also be seen in the diurnal variability of precipitation.

  9. Speeding up spin-component-scaled third-order pertubation theory with the chain of spheres approximation: the COSX-SCS-MP3 method

    NASA Astrophysics Data System (ADS)

    Izsák, Róbert; Neese, Frank

    2013-07-01

    The 'chain of spheres' approximation, developed earlier for the efficient evaluation of the self-consistent field exchange term, is introduced here into the evaluation of the external exchange term of higher order correlation methods. Its performance is studied in the specific case of the spin-component-scaled third-order Møller--Plesset perturbation (SCS-MP3) theory. The results indicate that the approximation performs excellently in terms of both computer time and achievable accuracy. Significant speedups over a conventional method are obtained for larger systems and basis sets. Owing to this development, SCS-MP3 calculations on molecules of the size of penicillin (42 atoms) with a polarised triple-zeta basis set can be performed in ∼3 hours using 16 cores of an Intel Xeon E7-8837 processor with a 2.67 GHz clock speed, which represents a speedup by a factor of 8-9 compared to the previously most efficient algorithm. Thus, the increased accuracy offered by SCS-MP3 can now be explored for at least medium-sized molecules.

  10. The theoretical simulation on electrostatic distribution of 1st proximity region in proximity focusing low-light-level image intensifier

    NASA Astrophysics Data System (ADS)

    Zhang, Liandong; Bai, Xiaofeng; Song, De; Fu, Shencheng; Li, Ye; Duanmu, Qingduo

    2015-03-01

    Low-light-level night vision technology is magnifying low light level signal large enough to be seen by naked eye, which uses the photons - photoelectron as information carrier. Until the micro-channel plate was invented, it has been possibility for the realization of high performance and miniaturization of low-light-level night vision device. The device is double-proximity focusing low-light-level image intensifier which places a micro-channel plate close to photocathode and phosphor screen. The advantages of proximity focusing low-light-level night vision are small size, light weight, small power consumption, no distortion, fast response speed, wide dynamic range and so on. It is placed parallel to each other for Micro-channel plate (both sides of it with metal electrode), the photocathode and the phosphor screen are placed parallel to each other. The voltage is applied between photocathode and the input of micro-channel plate when image intensifier works. The emission electron excited by photo on the photocathode move towards to micro-channel plate under the electric field in 1st proximity focusing region, and then it is multiplied through the micro-channel. The movement locus of emission electrons can be calculated and simulated when the distributions of electrostatic field equipotential lines are determined in the 1st proximity focusing region. Furthermore the resolution of image tube can be determined. However the distributions of electrostatic fields and equipotential lines are complex due to a lot of micro-channel existing in the micro channel plate. This paper simulates electrostatic distribution of 1st proximity region in double-proximity focusing low-light-level image intensifier with the finite element simulation analysis software Ansoft maxwell 3D. The electrostatic field distributions of 1st proximity region are compared when the micro-channel plates' pore size, spacing and inclination angle ranged. We believe that the electron beam movement

  11. Behavioral components of impulsivity.

    PubMed

    Stahl, Christoph; Voss, Andreas; Schmitz, Florian; Nuszbaum, Mandy; Tüscher, Oliver; Lieb, Klaus; Klauer, Karl Christoph

    2014-04-01

    Acting in accord with long-term goals requires control of interfering impulses, the success of which depends on several different processes. Using a structural-equation modeling approach, we investigated 5 behavioral components of impulsivity: the control of stimulus interference, proactive interference, and response interference, as well as decisional and motivational impulsivity. Results support the existence of 5 correlated but separable components of impulsive behavior. The present study is the 1st to demonstrate the separability of stimulus and response interference. It also supports the notion that control of response-related interference is not a unitary construct: Response-selection demands were separable from those of withholding or stopping. Relations between behavioral impulsivity components and self-report measures of impulsivity were largely absent. We conclude that as the construct of impulsivity has been extended to describe an increasingly diverse set of phenomena and processes, it has become too broad to be helpful in guiding future research. PMID:23957282

  12. A TWO-COMPONENT POWER LAW COVERING NEARLY FOUR ORDERS OF MAGNITUDE IN THE POWER SPECTRUM OF SPITZER FAR-INFRARED EMISSION FROM THE LARGE MAGELLANIC CLOUD

    SciTech Connect

    Block, David L.; Puerari, Ivanio; Elmegreen, Bruce G.; Bournaud, Frederic

    2010-07-20

    Power spectra of Large Magellanic Cloud (LMC) emission at 24, 70, and 160 {mu}m observed with the Spitzer Space Telescope have a two-component power-law structure with a shallow slope of -1.6 at low wavenumber, k, and a steep slope of -2.9 at high k. The break occurs at k {sup -1} {approx} 100-200 pc, which is interpreted as the line-of-sight thickness of the LMC disk. The slopes are slightly steeper for longer wavelengths, suggesting the cooler dust emission is smoother than the hot emission. The power spectrum (PS) covers {approx}3.5 orders of magnitude, and the break in the slope is in the middle of this range on a logarithmic scale. Large-scale driving from galactic and extragalactic processes, including disk self-gravity, spiral waves, and bars, presumably causes the low-k structure in what is effectively a two-dimensional geometry. Small-scale driving from stellar processes and shocks causes the high-k structure in a three-dimensional geometry. This transition in dimensionality corresponds to the observed change in PS slope. A companion paper models the observed power law with a self-gravitating hydrodynamics simulation of a galaxy like the LMC.

  13. Application of principal component analysis (PCA) and improved joint probability distributions to the inverse first-order reliability method (I-FORM) for predicting extreme sea states

    DOE PAGESBeta

    Eckert-Gallup, Aubrey C.; Sallaberry, Cédric J.; Dallman, Ann R.; Neary, Vincent S.

    2016-01-06

    Environmental contours describing extreme sea states are generated as the input for numerical or physical model simulations as a part of the standard current practice for designing marine structures to survive extreme sea states. These environmental contours are characterized by combinations of significant wave height (Hs) and either energy period (Te) or peak period (Tp) values calculated for a given recurrence interval using a set of data based on hindcast simulations or buoy observations over a sufficient period of record. The use of the inverse first-order reliability method (I-FORM) is a standard design practice for generating environmental contours. This papermore » develops enhanced methodologies for data analysis prior to the application of the I-FORM, including the use of principal component analysis (PCA) to create an uncorrelated representation of the variables under consideration as well as new distribution and parameter fitting techniques. As a result, these modifications better represent the measured data and, therefore, should contribute to the development of more realistic representations of environmental contours of extreme sea states for determining design loads for marine structures.« less

  14. Educational impact of a clinical anatomy workshop on 1st-year orthopedic and rheumatology fellows in Mexico City.

    PubMed

    Saavedra, M A; Villaseñor-Ovies, P; Harfush, L A; Navarro-Zarza, J E; Canoso, J J; Cruz-Domínguez, P; Vargas, A; Hernández-Díaz, C; Chiapas-Gasca, K; Camacho-Galindo, J; Alvarez-Nemegyei, J; Kalish, R A

    2016-05-01

    We aim to study the educational impact of a clinical anatomy workshop in 1st-year orthopedic and rheumatology fellows. First-year rheumatology fellows (N = 17) and a convenience sample of 1st-year orthopedic fellows (N = 14) from Mexico City in the 9th month of training participated in the study. The pre- and the post- workshop tests included the same 20 questions that had to be answered by identification or demonstration of relevant anatomical items. The questions, arranged by anatomical regions, were asked in five dynamic stations. Overall, the 31 participants showed an increase of correct answers, from a median of 6 (range 1 to 12) in the pre-workshop test, to a median of 14 (range 7 to 19) in the post-workshop test. In the pre-workshop test, the correct median answers were 7 (range 2 to 12) in the orthopedic fellows and 5 (range 1 to 10) in the rheumatology fellows (p = 0.297). Corresponding scores in the post-workshop were 15 (range 10 to 19) and 12 (range 7 to 18) (p = 0.026) showing a significant difference favoring the orthopedic group. Our clinical anatomy workshop was efficacious, in the short term, as a teaching instrument for 1st-year orthopedic and rheumatology fellows. The post-workshop scores, although significantly improved in both groups, particularly in the orthopedic fellows, were still suboptimal. Further refinements of our workshop might yield better results. PMID:26400643

  15. The chromosomal order of genes controlling the major histocompatibility complex, properdin factor B, and deficiency of the second component of complement.

    PubMed Central

    Raum, D; Glass, D; Carpenter, C B; Alper, C A; Schur, P H

    1976-01-01

    The relationship of the genes coding for HLA to those coding for properdin Factor B allotypes and for deficiency of the second component of complement (C2) was studied in families of patients with connective tissue disorders. Patients were selected because they were heterozygous or homozygous for C2 deficiency. 12 families with 15 matings informative for C2 deficiency were found. Of 57 informative meioses, two crossovers were noted between the C2 deficiency gene and the HLA-B gene, with a recombinant fraction of 0.035. A lod score of 13 was calculated for linkage between C2 deficiency and HLA-B at a maximum likelihood value of the recombinant fraction of 0.04. 18 families with 21 informative matings for both properdin Factor B allotype and HLA-B were found. Of 72 informative meioses, three recombinants were found, giving a recombinant fraction of 0.042. A lod score of 16 between HLA-B and Factor B allotypes was calculated at a maximum likelihood value of the recombinant fraction of 0.04. A crossover was shown to have occurred between genes for Factor B and HLA-D, in which HLA-D segregared with HLA-A and B. These studies suggest that the genes for Factor B and C2 deficiency are located outside those for HLA, that the order of genese is HLA-A, -B, -D, Factor B allotype, C2 deficiency, that the genes coding for C2 deficiency and Factor B allotypes are approximately 3--5 centimorgans from the HLA-A and HLA-B loci, and that the apparent lack of recombinants between the Factor B gene and C2 deficiency gene suggests that these two genes lie in close proximity to one another. PMID:993342

  16. Identification and Characterization of Zebrafish SULT1 ST9, SULT3 ST4, and SULT3 ST5

    PubMed Central

    Mohammed, Yasir I.; Kurogi, Katsuhisa; Shaban, Amani Al; Xu, Zheng; Liu, Ming-Yih; Williams, Frederick E.; Sakakibara, Yoichi; Suiko, Masahito; Bhuiyan, Shakhawat; Liu, Ming-Cheh

    2012-01-01

    By searching the GenBank database, we identified sequences encoding three new zebrafish cytosolic sulfotransferases (SULTs). These three new zebrafish SULTs, designated SULT1 ST9, SULT3 ST4, and SULT3 ST5, were cloned, expressed, purified, and characterized. SULT1 ST9 appeared to be mostly involved in the metabolism and detoxification of xenobiotics such as β-naphthol, β-naphthylamine, caffeic acid and gallic acid. SULT3 ST4 showed strong activity toward endogenous compound such as dehydroepiandrosterone (DHEA), pregnenolone, and 17β-estradiol. SULT3 ST5 showed weaker, but significant, activities toward endogenous compounds such as DHEA and corticosterone, as well as xenobiotics including mestranol, β-naphthylamine, β-naphthol, and butylated hydroxyl anisole (BHA). pH-dependency and kinetic constants of these three enzymes were determined with DHEA, β-naphthol, and 17β-estradiol as substrates. Reverse transcription-polymerase chain reaction (RT-PCR) was performed to examine the expression of these three new zebrafish SULTs at different developmental stages during embryogenesis, through larval development, and on to maturity. PMID:22360938

  17. Attitudes towards General Practice: a comparative cross-sectional survey of 1st and 5th year medical students

    PubMed Central

    Kruschinski, Carsten; Wiese, Birgitt; Hummers-Pradier, Eva

    2012-01-01

    Objective: Positive attitudes towards General Practice can be understood as a prerequisite for becoming a General Practitioner (GP) and for collaboration with GPs later on. This study aimed to assess attitudes of medical students at the beginning and the end of medical school. Methods: A total of 160 1st year students at Hannover Medical School were surveyed. Their attitudes were compared to those of 287 5th year students. Descriptive, bi- and multivariate analyses were performed to investigate influences of year of study and gender. Results: Year of study and gender both were associated with the attitudes towards General Practice. The interest in General Practice and patient-orientation (communication, care of older patients with chronic diseases) was higher in 1st year students compared to more advanced students. Female students valued such requirements more than male students, the differences in attitudes between the years of study being more pronounced in male students. Conclusion: Despite some limitations caused by the cross-sectional design, the attitudes towards General Practice competencies changed to their disadvantage during medical school. This suggests a formative influence of the strategies used in medical education. Educational strategies, however, could be used to bring about a change of attitudes in the other direction. PMID:23255966

  18. BMI differences in 1st and 2nd generation immigrants of Asian and European origin to Australia.

    PubMed

    Hauck, Katharina; Hollingsworth, Bruce; Morgan, Lawrie

    2011-01-01

    We estimate assimilation of immigrants' body mass index (BMI) to the host population of Australia over one generation, conducting separate analyses for immigrants from 7 regions of Europe and Asia. We use quantile regressions to allow for differing impact of generational status across 19 quantiles of BMI from under-weight to morbidly obese individuals. We find that 1st generation South European immigrants have higher, and South and East Asian immigrants have lower BMI than Australians, but have assimilated to the BMI of their hosts in the 2nd generation. There are no or only small BMI differences between Australians and 1st and 2nd generation immigrants from East Europe, North-West Europe, Middle East and Pacific regions. We conclude that both upward and downward assimilation in some immigrant groups is most likely caused by factors which can change over one generation (such as acculturation), and not factors which would take longer to change (such as genetics). Our results suggest that public health policies targeting the lifestyles of well educated Asian immigrants may be effective in preventing BMI increase in this subgroup. PMID:20869292

  19. Orbital-optimized third-order Møller-Plesset perturbation theory and its spin-component and spin-opposite scaled variants: Application to symmetry breaking problems

    NASA Astrophysics Data System (ADS)

    Bozkaya, Uǧur

    2011-12-01

    In this research, orbital-optimized third-order Møller-Plesset perturbation theory (OMP3) and its spin-component and spin-opposite scaled variants (SCS-OMP3 and SOS-OMP3) are introduced. Using a Lagrangian-based approach, an efficient, quadratically convergent algorithm for variational optimization of the molecular orbitals (MOs) for third-order Møller-Plesset perturbation theory (MP3) is presented. Explicit equations for response density matrices, the MO gradient, and Hessian are reported in spin-orbital form. The OMP3, SCS-OMP3, and SOS-OMP3 approaches are compared with the second-order Møller-Plesset perturbation theory (MP2), MP3, coupled-cluster doubles (CCD), optimized-doubles (OD), and coupled-cluster singles and doubles (CCSD) methods. All these methods are applied to the O4 +, O3, and seven diatomic molecules. Results demonstrate that the OMP3 and its variants provide significantly better vibrational frequencies than MP3, CCSD, and OD for the molecules where the symmetry-breaking problems are observed. For O4 +, the OMP3 prediction, 1343 cm-1, for ω6 (b3u) mode, where symmetry-breaking appears, is even better than presumably more reliable methods such as Brueckner doubles (BD), 1194 cm-1, and OD, 1193 cm-1, methods (the experimental value is 1320 cm-1). For O3, the predictions of SCS-OMP3 (1143 cm-1) and SOS-OMP3 (1165 cm-1) are remarkably better than the more robust OD method (1282 cm-1); the experimental value is 1089 cm-1. For the seven diatomics, again the SCS-OMP3 and SOS-OMP3 methods provide the lowest average errors, |Δωe| = 44 and |Δωe| = 35 cm-1, respectively, while for OD, |Δωe| = 161 cm-1and CCSD |Δωe| = 106 cm-1. Hence, the OMP3 and especially its spin-scaled variants perform much better than the MP3, CCSD, and more robust OD approaches for considered test cases. Therefore, considering both the computational cost and the reliability, SCS-OMP3 and SOS-OMP3 appear to be the best methods for the symmetry-breaking cases, based on

  20. 77 FR 39215 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Advance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-02

    ... Countervailing Duty Orders; Policy Bulletin, 63 FR 18871 (April 16, 1998). The Notice of Initiation of Five-Year... Investigations Lemon Juice from Argentina (A-357-818) (1st Sally Gannon Review). (202) 482-0162 Lemon Juice...

  1. 77 FR 5485 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Advance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-03

    ... Five-Year Sunset Reviews. Antidumping Duty Proceedings Activated Carbon From China (A-570-904) (1st... Countervailing Duty Orders; Policy Bulletin, 63 FR 18871 (April 16, 1998). The Notice of Initiation of...

  2. 78 FR 46575 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Advance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-01

    ... (``Sunset'') Reviews of Antidumping and Countervailing Duty Orders; Policy Bulletin, 63 FR 18871 (April 16... Garment Hangers Jennifer Moats (202) 482-5047. from China (A-570-918) (1st Review). Countervailing...

  3. The efficiency of second order orientation coherence detection.

    PubMed

    Baldwin, Alex S; Husk, Jesse S; Edwards, Lauren; Hess, Robert F

    2015-04-01

    Neurons in early visual cortex respond to both luminance- (1st order) and contrast-modulated (2nd order) local features in the visual field. In later extra-striate areas neurons with larger receptive fields integrate information across the visual field. For example, local luminance-defined features can be integrated into contours and shapes. Evidence for the global integration of features defined by contrast-modulation is less well established. While good performance in some shape tasks has been demonstrated with 2nd order stimuli, the integration of contours fails with 2nd order elements. Recently we developed a global orientation coherence task that is more basic than contour integration, bearing similarity to the well-established global motion coherence task. Similar to our previous 1st order result for this task, we find 2nd order coherence detection to be scale-invariant. There was a small but significant threshold elevation for 2nd order relative to 1st order. We used a noise masking approach to compare the efficiency of orientation integration for the 1st and 2nd order. We find a significant deficit for 2nd order detection at both the local and global level, however the small size of this effect stands in stark contrast against previous results from contour-integration experiments, which are almost impossible with 2nd order stimuli. PMID:25749675

  4. Impact of volcanic eruptions on the climate of the 1st millennium AD in a comprehensive climate simulation

    NASA Astrophysics Data System (ADS)

    Wagner, Sebastian; Zorita, Eduardo

    2015-04-01

    The climate of the 1st millennium AD shows some remarkable differences compared to the last millennium concerning variation in external forcings. Together with an orbitally induced increased solar insolation during the northern hemisphere summer season and a general lack of strong solar minima, the frequency and intensity of large tropical and extratropical eruptions is decreased. Here we present results of a new climate simulation carried out with the comprehensive Earth System Model MPI-ESM-P forced with variations in orbital, solar, volcanic and greenhouse gas variations and land use changes for the last 2,100 years. The atmospheric model has a horizontal resolution of T63 (approx. 125x125 km) and therefore also allows investigations of regional-to-continental scale climatic phenomena. The volcanic forcing was reconstructed based on a publication by Sigl et al. (2013) using the sulfate records of the NEEM and WAIS ice cores. To obtain information on the aerosol optical depth (AOD) these sulfate records were scaled to an established reconstruction from Crowley and Unterman (2010), which is also a standard forcing in the framework of CMIP5/PMIP3. A comparison between the newly created data set with the Crowley and Unterman dataset reveals that the new reconstruction shows in general weaker intensities, especially of the large tropical outbreaks and fewer northern hemispheric small-to-medium scale eruptions. However, the general pattern in the overlapping period is similar. A hypothesis that can be tested with the simulation is whether the reduced volcanic intensity of the 1st millennium AD contributed to the elevated temperature levels over Europe, evident within a new proxy-based reconstruction. On the other hand, the few but large volcanic eruptions, e.g. the 528 AD event, also induced negative decadal-scale temperature anomalies. Another interesting result of the simulation relates to the 79 AD eruption of the Vesuvius, which caused the collapse of the city of

  5. Plasma properties from the multi-wavelength analysis of the November 1st 2003 CME/shock event

    PubMed Central

    Benna, Carlo; Mancuso, Salvatore; Giordano, Silvio; Gioannini, Lorenzo

    2012-01-01

    The analysis of the spectral properties and dynamic evolution of a CME/shock event observed on November 1st 2003 in white-light by the LASCO coronagraph and in the ultraviolet by the UVCS instrument operating aboard SOHO, has been performed to compute the properties of some important plasma parameters in the middle corona below about 2R⊙. Simultaneous observations obtained with the MLSO/Mk4 white-light coronagraph, providing both the early evolution of the CME expansion in the corona and the pre-shock electron density profile along the CME front, were also used to study this event. By combining the above information with the analysis of the metric type II radio emission detected by ground-based radio spectrographs, we finally derive estimates of the values of the local Alfvén speed and magnetic field strength in the solar corona. PMID:25685432

  6. Levels of innate immune factors in preterm and term mothers' breast milk during the 1st month postpartum.

    PubMed

    Trend, Stephanie; Strunk, Tobias; Lloyd, Megan L; Kok, Chooi Heen; Metcalfe, Jessica; Geddes, Donna T; Lai, Ching Tat; Richmond, Peter; Doherty, Dorota A; Simmer, Karen; Currie, Andrew

    2016-04-14

    There is a paucity of data on the effect of preterm birth on the immunological composition of breast milk throughout the different stages of lactation. We aimed to characterise the effects of preterm birth on the levels of immune factors in milk during the 1st month postpartum, to determine whether preterm milk is deficient in antimicrobial factors. Colostrum (days 2-5 postpartum), transitional milk (days 8-12) and mature milk (days 26-30) were collected from mothers of extremely preterm (<28 weeks of gestation, n 15), very preterm (28-<32 weeks of gestation, n 15), moderately preterm (32-<37 weeks of gestation, n 15) and term infants (37-41 weeks of gestation, n 15). Total protein, lactoferrin, secretory IgA, soluble CD14 receptor (sCD14), transforming growth factor-β2 (TGF-β2), α defensin 5 (HD5), β defensins 1 (HBD1) and 2, IL-6, IL-10, IL-13, interferon-γ, TNF-α and lysozyme (LZ) were quantified in milk. We examined the effects of lactation stage, gestational age, volume of milk expressed, mode of delivery, parity and maternal infection on milk immune factor concentrations using repeated-measures regression analysis. The concentrations of all factors except LZ and HD5 decreased over the 1st month postpartum. Extremely preterm mothers had significantly higher concentrations of HBD1 and TGF-β2 in colostrum than term mothers did. After controlling for other variables in regression analyses, preterm birth was associated with higher concentrations of HBD1, LZ and sCD14 in milk samples. In conclusion, preterm breast milk contains significantly higher concentrations of some immune proteins than term breast milk. PMID:26891901

  7. A decadal gridded hyperspectral infrared record for climate Sep 1st 2002--Aug 31st 2012

    NASA Astrophysics Data System (ADS)

    Chapman, David Raymond

    We present a gridded Fundamental Decadal Data Record (FDDR) of Brightness Temperatures (BT) from the NASA Atmospheric Infrared Sounder (AIRS) from ten years of hyperspectral Infrared Radiances onboard the NASA EOS Aqua satellite. Although global surface temperature data records are available for over 130 years, it was not until 1978 when the Microwave Sounding Unit (MSU) was the first instrument series to reliably monitor long-term trends of the upper atmosphere. AIRS, operational on September 1, 2002 is the first successful hyperspectral satellite weather instrument of more than 1 year, and provides a 10 year global hyperspectral IR radiance data record. Our contribution was to prepare a gridded decadal data record of climate resolution from the AIRS Outgoing Longwave Spectrum (OLS). In order to do this, we developed a robust software infrastructure "Gridderama" using large multivariate array storage to facilitate this multi-terabyte parallel data processing task while ensuring integrity, tracking provenance, logging errors, and providing extensive visualization. All of our data, code, logs and visualizations are freely available online and browsable via a real-time "Data Catalog" interface. We show that these global all-sky trends are consistent with the expected radiative forcings from an increase in greenhouse gasses. We have also measured high global correlations with the GISS global surface air temperatures as well as high regional anticorrelations with the NOAA ONI index of El Niño phase. In addition, we have performed inter-annual inter-comparisons with the Moderate Resolution Spectro-radiometer (MODIS) on the same Aqua satellite to examine the relative consistency of their calibrations. The comparisons of the two instruments for the 4µ spectral channels (between 3.9µ and 4.1µ) indicate an inter-annual warming of 0.13K per decade of AIRS more than MODIS. This decadal relative drift is small compared to inter-annual variability but on the order of

  8. Compact first and second order polarization mode dispersion emulator

    NASA Astrophysics Data System (ADS)

    Zhang, Yang; Li, Shiguang; Yang, Changxi

    2005-08-01

    We propose a 1st and 2nd order polarization mode dispersion emulator (PMDE) with one variable differential group delay (DGD) element using birefringence crystals and four polarization controllers (PCs). Monte Carlo simulations demonstrate that the output 1st and 2nd order polarization mode dispersion (PMD) generated by the PMDE consists with statistic theory. Compared with former PMDEs, this design is tunable, lower-cost, and more integrated for fabrication, which shows response time of 150 ?s, response frequency of 3.8 kHz, working wavelength of 1550 nm, total power consumption of less than 3 W, working range of 0---84 ps and 0---3600 ps2 for 1st and 2nd order PMD emulation, respectively. Also, it is programmable and can be controlled by either singlechip or computer. It can be applied to study the outage probability of optical communication systems due to PMD effect and the effectiveness of PMD compensation.

  9. Social and moral norm differences among Portuguese 1st and 6th year medical students towards their intention to comply with hand hygiene.

    PubMed

    Roberto, Magda S; Mearns, Kathryn; Silva, Silvia A

    2012-01-01

    This study examines social and moral norms towards the intention to comply with hand hygiene among Portuguese medical students from 1st and 6th years (N = 175; 121 from the 1st year, 54 from the 6th year). The study extended the theory of planned behaviour theoretical principles and hypothesised that both subjective and moral norms will be the best predictors of 1st and 6th year medical students' intention to comply with hand hygiene; however, these predictors ability to explain intention variance will change according to medical students' school year. Results indicated that the subjective norm, whose referent focuses on professors, is a relevant predictor of 1st year medical students' intention, while the subjective norm that emphasises the relevance of colleagues predicts the intentions of medical students from the 6th year. In terms of the moral norm, 6th year students' intention is better predicted by a norm that interferes with compliance; whereas intentions from 1st year students are better predicted by a norm that favours compliance. Implications of the findings highlight the importance of role models and mentors as key factors in teaching hand hygiene in medical undergraduate curricula. PMID:22111788

  10. Evaluation of measured and simulated turbulent components of a snow cover energy balance model in order to refine the turbulent transfer algorithm

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Energy balance models use physically based principles to simulate snow cover accumulation and melt. Snobal, a snow cover energy balance model, uses a flux-profile approach to calculating the turbulent flux (sensible and latent heat flux) components of the energy balance. Historically, validation dat...

  11. First- and second-order contrast sensitivity functions reveal disrupted visual processing following mild traumatic brain injury.

    PubMed

    Spiegel, Daniel P; Reynaud, Alexandre; Ruiz, Tatiana; Laguë-Beauvais, Maude; Hess, Robert; Farivar, Reza

    2016-05-01

    Vision is disrupted by traumatic brain injury (TBI), with vision-related complaints being amongst the most common in this population. Based on the neural responses of early visual cortical areas, injury to the visual cortex would be predicted to affect both 1(st) order and 2(nd) order contrast sensitivity functions (CSFs)-the height and/or the cut-off of the CSF are expected to be affected by TBI. Previous studies have reported disruptions only in 2(nd) order contrast sensitivity, but using a narrow range of parameters and divergent methodologies-no study has characterized the effect of TBI on the full CSF for both 1(st) and 2(nd) order stimuli. Such information is needed to properly understand the effect of TBI on contrast perception, which underlies all visual processing. Using a unified framework based on the quick contrast sensitivity function, we measured full CSFs for static and dynamic 1(st) and 2(nd) order stimuli. Our results provide a unique dataset showing alterations in sensitivity for both 1(st) and 2(nd) order visual stimuli. In particular, we show that TBI patients have increased sensitivity for 1(st) order motion stimuli and decreased sensitivity to orientation-defined and contrast-defined 2(nd) order stimuli. In addition, our data suggest that TBI patients' sensitivity for both 1(st) order stimuli and 2(nd) order contrast-defined stimuli is shifted towards higher spatial frequencies. PMID:27036098

  12. Adaptive and Effortful Control and Academic Self-efficacy Beliefs on Achievement: A Longitudinal Study of 1st through 3rd Graders

    PubMed Central

    Liew, Jeffrey; McTigue, Erin; Barrois, Lisa; Hughes, Jan

    2009-01-01

    The linkages between self-regulatory processes and achievement were examined across three years in 733 children beginning at 1st grade (M = 6.57 years, SD = .39 at 1st grade) who were identified as lower achieving in literacy. Accounting for consistencies in measures (from one year prior) and for influences of child’s age, gender, IQ, ethnicity and economic adversity on achievement, results indicate that adaptive/effortful control at 1st grade contributed to both academic self-efficacy beliefs at 2nd grade, and reading (but not math) achievement at 3rd grade. Although academic self-efficacy did not partially mediate the linkage between adaptive/effortful control and achievement, academic self-efficacy beliefs were positively correlated with reading and math. Results support the notion that early efforts to promote children’s self-regulatory skills would enhance future academic self-beliefs and achievement, particularly in literacy. PMID:19169387

  13. Time decay of object, place and temporal order memory in a paradigm assessing simultaneously episodic-like memory components in mice.

    PubMed

    Belblidia, Hassina; Abdelouadoud, Abdelmalek; Jozet-Alves, Christelle; Dumas, Hélène; Freret, Thomas; Leger, Marianne; Schumann-Bard, Pascale

    2015-06-01

    A common trait of numerous memory disorders is the impairment of episodic memory. Episodic memory is a delay-dependant memory, especially associating three components, the "what", "where" and "when" of a unique event. To investigate underlying mechanisms of such memory, several tests, mainly based on object exploration behaviour, have been set up in rodents. Recently, a three-trial object recognition task has been proposed to evaluate simultaneously the different components of episodic-like memory in rodents. However, to date, the time course of each memory component in this paradigm is not known. We characterised here the time course of memory decay in adult mice during the three-trial object recognition task, with inter-trial interval (ITI) ranging from 1h to 4h. We found that, with 1h and 2h, but not 4h ITI, mice spent more time to explore the displaced "old object" relative to the displaced "recent object", reflecting memory for "what and when". Concomitantly, animals exhibited more exploration time for the displaced "old object" relative to the stationary "old object", reflecting memory for "what and where". These results provide strong evidence that mice establish an integrated memory for unique experience consisting of the "what", "where" and "when" that can persist until 2h ITI. PMID:25732955

  14. Canonical angles in a compact binary star system with spinning components: Approximative solution through next-to-leading-order spin-orbit interaction for circular orbits

    NASA Astrophysics Data System (ADS)

    Tessmer, Manuel; Steinhoff, Jan; Schäfer, Gerhard

    2013-03-01

    This paper will deal with an explicit determination of the time evolution of the spin orientation axes and the evolution of the orbital phase in the case of circular orbits under next-to-leading-order spin-orbit interactions. We modify the method of Schneider and Cui proposed [Theoreme über Bewegungsintegrale und ihre Anwendung in Bahntheorien, A Theoretische Geodäsie Vol. 121 (Verlag der Bayerischen Akademie der Wissenschaften, München, Germany, 2005)] to iteratively remove oscillatory terms in the equations of motion for different masses that were not present in the case of equal masses. Our smallness parameter is chosen to be the difference of the symmetric mass ratio to the value 1/4. Before the first Lie transformation, the set of conserved quantities consists of the total angular momentum J and the amplitudes of the orbital angular momentum and of the spins, L, S1, and S2. In contrast, S≔|S1+S2| is not conserved, and we wish to shift its nonconservation to higher orders of the smallness parameter. We perform the iterations explicitly to first order, while performing higher orders would mean no structural difference or harder mathematical difficulties. To apply this method, we develop a canonical system of spin variables reduced by the conservation law of total angular momentum, which is imposed on the phase space as a constraint. The result is an asymptotic series in ɛ that may be truncated appropriately by considering the physical properties of the regarded system.

  15. Path-Integral Monte Carlo Determination of the Fourth-Order Virial Coefficient for a Unitary Two-Component Fermi Gas with Zero-Range Interactions

    NASA Astrophysics Data System (ADS)

    Yan, Yangqian; Blume, D.

    2016-06-01

    The unitary equal-mass Fermi gas with zero-range interactions constitutes a paradigmatic model system that is relevant to atomic, condensed matter, nuclear, particle, and astrophysics. This work determines the fourth-order virial coefficient b4 of such a strongly interacting Fermi gas using a customized ab initio path-integral Monte Carlo (PIMC) algorithm. In contrast to earlier theoretical results, which disagreed on the sign and magnitude of b4 , our b4 agrees within error bars with the experimentally determined value, thereby resolving an ongoing literature debate. Utilizing a trap regulator, our PIMC approach determines the fourth-order virial coefficient by directly sampling the partition function. An on-the-fly antisymmetrization avoids the Thomas collapse and, combined with the use of the exact two-body zero-range propagator, establishes an efficient general means to treat small Fermi systems with zero-range interactions.

  16. Path-Integral Monte Carlo Determination of the Fourth-Order Virial Coefficient for a Unitary Two-Component Fermi Gas with Zero-Range Interactions.

    PubMed

    Yan, Yangqian; Blume, D

    2016-06-10

    The unitary equal-mass Fermi gas with zero-range interactions constitutes a paradigmatic model system that is relevant to atomic, condensed matter, nuclear, particle, and astrophysics. This work determines the fourth-order virial coefficient b_{4} of such a strongly interacting Fermi gas using a customized ab initio path-integral Monte Carlo (PIMC) algorithm. In contrast to earlier theoretical results, which disagreed on the sign and magnitude of b_{4}, our b_{4} agrees within error bars with the experimentally determined value, thereby resolving an ongoing literature debate. Utilizing a trap regulator, our PIMC approach determines the fourth-order virial coefficient by directly sampling the partition function. An on-the-fly antisymmetrization avoids the Thomas collapse and, combined with the use of the exact two-body zero-range propagator, establishes an efficient general means to treat small Fermi systems with zero-range interactions. PMID:27341213

  17. Path integral Monte Carlo determination of the fourth-order virial coefficient for unitary two-component Fermi gas with zero-range interactions

    NASA Astrophysics Data System (ADS)

    Yan, Yangqian; Blume, D.

    2016-05-01

    The unitary equal-mass Fermi gas with zero-range interactions constitutes a paradigmatic model system that is relevant to atomic, condensed matter, nuclear, particle, and astro physics. This work determines the fourth-order virial coefficient b4 of such a strongly-interacting Fermi gas using a customized ab inito path integral Monte Carlo (PIMC) algorithm. In contrast to earlier theoretical results, which disagreed on the sign and magnitude of b4, our b4 agrees with the experimentally determined value, thereby resolving an ongoing literature debate. Utilizing a trap regulator, our PIMC approach determines the fourth-order virial coefficient by directly sampling the partition function. An on-the-fly anti-symmetrization avoids the Thomas collapse and, combined with the use of the exact two-body zero-range propagator, establishes an efficient general means to treat small Fermi systems with zero-range interactions. We gratefully acknowledge support by the NSF.

  18. Case Study of Severe Lightning Activity Prior to and During the Outbreak of the June 1st Greenbelt Tornado

    NASA Astrophysics Data System (ADS)

    Barnum, B. H.; Badesha, S.; Shishineh, A.; Adams, N. H.

    2012-12-01

    Surges in lightning activity have been known to be associated with the outbreak of tornado activity. We present a case study of a tornado that touched down near Greenbelt Maryland during the evening of June 1st 2012. Preceding the tornado touchdown, two single point lightning detection systems, a Boltek LD-250 and Vaisala SA20, recorded very high lightning activity rates. An electric field mill (EFM) was also making measurements and recorded large, rapid amplitude oscillations in the vertical electric fields. These electric field oscillations quickly subsided after the initial tornado touchdown. The lightning activity also generated significant RF interference in the S-band dish antenna operated at the Applied Physics Laboratory. It was somewhat surprising that the lightning activity produced enough radiation at these frequencies to cause measured levels of interference which could potentially impair satellite communications. Our interpretation of the EFM data is that intensive vertical forcing and rotation in the thunderstorm during the tornado formation caused the observed rapid electric field oscillations. At the same time, the vertical mixing in the storm caused a surge in lightning activity rates recorded by the Boltek and Vaisala sensors. Following the tornado touchdown, there was a rapid decrease in the lightning rates from the sensors. The EFM oscillations also abruptly ceased and went to a more normal slow-varying pattern typically observed during other thunderstorms without associated tornado activity. It is suggested that a network of field mills could provide realtime warning of imminent tornado activity.

  19. Synthesis of nanomagnetic fluids and their UV spectrophotometric response with aliphatic organic acids and 1st tier dendrimers

    NASA Astrophysics Data System (ADS)

    Pandya, Shivani R.; Singh, Man

    2016-04-01

    Synthesis of Magnetic nanoparticles were made using coprecipitation method on mixing Fe+3 and Fe+2 in 2:1 ratio with aqueous 8M NaOH which on heating at 90°C for 2 h has yielded 85% magnetic (Fe3O4) nanoparticles (MNPs), characterized by XRD, VSM, SEM, and HR-TEM. The formic acid (FA), oxalic acid (OA) and citric acid (CA), the series of aliphatic organic acids along with Trimesoyl 1, 3, 5 tridimethyl malonate (TTDMM), trimesoyl 1, 3, 5 tridiethyl malonate (TTDEM), trimesoyl 1, 3, 5 tridipropyl malonate (TTDPM), trimesoyl 1, 3, 5 tridibutyl malonate (TTDBM) and trimesoyl 1, 3, 5 tridihexyl malonate (TTDHM) 1st tier dendrimers were used separately for preparing nanomagnetic fluid. From 25 to 150 µM MNPs at an interval of 25 µM were dispersed in 150 µM of acids and dendrimers separately with DMSO. UV-VIS spectrophotometry showed a maximum MNPs dispersion with TTDMM against others and found to be most stable nanomagnetic fluid on account of capping type mechanism of acids.

  20. Stem Cell Gene Therapy for Fanconi Anemia: Report from the 1st International Fanconi Anemia Gene Therapy Working Group Meeting

    PubMed Central

    Tolar, Jakub; Adair, Jennifer E; Antoniou, Michael; Bartholomae, Cynthia C; Becker, Pamela S; Blazar, Bruce R; Bueren, Juan; Carroll, Thomas; Cavazzana-Calvo, Marina; Clapp, D Wade; Dalgleish, Robert; Galy, Anne; Gaspar, H Bobby; Hanenberg, Helmut; Von Kalle, Christof; Kiem, Hans-Peter; Lindeman, Dirk; Naldini, Luigi; Navarro, Susana; Renella, Raffaele; Rio, Paula; Sevilla, Julián; Schmidt, Manfred; Verhoeyen, Els; Wagner, John E; Williams, David A; Thrasher, Adrian J

    2011-01-01

    Survival rates after allogeneic hematopoietic cell transplantation (HCT) for Fanconi anemia (FA) have increased dramatically since 2000. However, the use of autologous stem cell gene therapy, whereby the patient's own blood stem cells are modified to express the wild-type gene product, could potentially avoid the early and late complications of allogeneic HCT. Over the last decades, gene therapy has experienced a high degree of optimism interrupted by periods of diminished expectation. Optimism stems from recent examples of successful gene correction in several congenital immunodeficiencies, whereas diminished expectations come from the realization that gene therapy will not be free of side effects. The goal of the 1st International Fanconi Anemia Gene Therapy Working Group Meeting was to determine the optimal strategy for moving stem cell gene therapy into clinical trials for individuals with FA. To this end, key investigators examined vector design, transduction method, criteria for large-scale clinical-grade vector manufacture, hematopoietic cell preparation, and eligibility criteria for FA patients most likely to benefit. The report summarizes the roadmap for the development of gene therapy for FA. PMID:21540837

  1. Child gender and weight status moderate the relation of maternal feeding practices to body esteem in 1st grade children.

    PubMed

    Shriver, Lenka H; Hubbs-Tait, Laura; Harrist, Amanda W; Topham, Glade; Page, Melanie

    2015-06-01

    Prevention of body dissatisfaction development is critical for minimizing adverse effects of poor body esteem on eating behaviors, self-esteem, and overall health. Research has examined body esteem and its correlates largely in pre-adolescents and adolescents; however, important questions remain about factors influencing body esteem of younger children. The main purpose of this study was to test moderation by children's gender and weight status of the relation of maternal controlling feeding practices to 1st graders' body esteem. The Body Esteem Scale (BES) and anthropometric measurements were completed during one-on-one child interviews at school. Mothers completed the Child Feeding Questionnaire (restriction, monitoring, concern, self-assessed maternal weight). A total of 410 mother/child dyads (202 girls) participated. Percent of children classified as overweight (BMI-for-age ≥85th) was: girls - 29%; boys - 27%. Gender moderated the relation between restriction and body esteem (β = -.140, p = .05), with maternal restriction predicting body esteem in girls but not boys. The hypothesized three-way interaction among gender, child weight status, and monitoring was confirmed. Monitoring was significantly inversely related to body esteem only for overweight/obese girls (b = -1.630). The moderating influence of gender or gender and weight status on the link between maternal feeding practices and body esteem suggests the importance of body esteem interventions for girls as early as first grade. PMID:25624022

  2. Frontline nilotinib in patients with chronic myeloid leukemia in chronic phase: results from the European ENEST1st study.

    PubMed

    Hochhaus, A; Rosti, G; Cross, N C P; Steegmann, J L; le Coutre, P; Ossenkoppele, G; Petrov, L; Masszi, T; Hellmann, A; Griskevicius, L; Wiktor-Jedrzejczak, W; Rea, D; Coriu, D; Brümmendorf, T H; Porkka, K; Saglio, G; Gastl, G; Müller, M C; Schuld, P; Di Matteo, P; Pellegrino, A; Dezzani, L; Mahon, F-X; Baccarani, M; Giles, F J

    2016-01-01

    The Evaluating Nilotinib Efficacy and Safety in Clinical Trials as First-Line Treatment (ENEST1st) study included 1089 patients with newly diagnosed chronic myeloid leukemia in chronic phase. The rate of deep molecular response (MR(4) (BCR-ABL1⩽0.01% on the International Scale or undetectable BCR-ABL1 with ⩾10,000 ABL1 transcripts)) at 18 months was evaluated as the primary end point, with molecular responses monitored by the European Treatment and Outcome Study network of standardized laboratories. This analysis was conducted after all patients had completed 24 months of study treatment (80.9% of patients) or discontinued early. In patients with typical BCR-ABL1 transcripts and ⩽3 months of prior imatinib therapy, 38.4% (404/1052) achieved MR(4) at 18 months. Six patients (0.6%) developed accelerated or blastic phase, and 13 (1.2%) died. The safety profile of nilotinib was consistent with that of previous studies, although the frequencies of some nilotinib-associated adverse events were lower (for example, rash, 21.4%). Ischemic cardiovascular events occurred in 6.0% of patients. Routine monitoring of lipid and glucose levels was not mandated in the protocol. These results support the use of frontline nilotinib, particularly when achievement of a deep molecular response (a prerequisite for attempting treatment-free remission in clinical trials) is a treatment goal. PMID:26437782

  3. Frontline nilotinib in patients with chronic myeloid leukemia in chronic phase: results from the European ENEST1st study

    PubMed Central

    Hochhaus, A; Rosti, G; Cross, N C P; Steegmann, J L; le Coutre, P; Ossenkoppele, G; Petrov, L; Masszi, T; Hellmann, A; Griskevicius, L; Wiktor-Jedrzejczak, W; Rea, D; Coriu, D; Brümmendorf, T H; Porkka, K; Saglio, G; Gastl, G; Müller, M C; Schuld, P; Di Matteo, P; Pellegrino, A; Dezzani, L; Mahon, F-X; Baccarani, M; Giles, F J

    2016-01-01

    The Evaluating Nilotinib Efficacy and Safety in Clinical Trials as First-Line Treatment (ENEST1st) study included 1089 patients with newly diagnosed chronic myeloid leukemia in chronic phase. The rate of deep molecular response (MR4 (BCR-ABL1⩽0.01% on the International Scale or undetectable BCR-ABL1 with ⩾10 000 ABL1 transcripts)) at 18 months was evaluated as the primary end point, with molecular responses monitored by the European Treatment and Outcome Study network of standardized laboratories. This analysis was conducted after all patients had completed 24 months of study treatment (80.9% of patients) or discontinued early. In patients with typical BCR-ABL1 transcripts and ⩽3 months of prior imatinib therapy, 38.4% (404/1052) achieved MR4 at 18 months. Six patients (0.6%) developed accelerated or blastic phase, and 13 (1.2%) died. The safety profile of nilotinib was consistent with that of previous studies, although the frequencies of some nilotinib-associated adverse events were lower (for example, rash, 21.4%). Ischemic cardiovascular events occurred in 6.0% of patients. Routine monitoring of lipid and glucose levels was not mandated in the protocol. These results support the use of frontline nilotinib, particularly when achievement of a deep molecular response (a prerequisite for attempting treatment-free remission in clinical trials) is a treatment goal. PMID:26437782

  4. 1st Quarter Transportation Report FY 2015: Radioactive Waste Shipments to and from the Nevada National Security Site (NNSS)

    SciTech Connect

    Gregory, Louis

    2015-02-20

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to and from the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the 1st quarter of Fiscal Year (FY) 2015 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report include minor volumes of non-radioactive classified waste/material that were approved for disposal (non-radioactive classified or nonradioactive classified hazardous). Volume reports showing cubic feet generated using the Low-Level Waste Information System may vary slightly due to rounding conventions for volumetric conversions from cubic meters to cubic feet.

  5. Embryonic development of chicken (Gallus Gallus Domesticus) from 1st to 19th day-ectodermal structures.

    PubMed

    Toledo Fonseca, Erika; De Oliveira Silva, Fernanda Menezes; Alcântara, Dayane; Carvalho Cardoso, Rafael; Luís Franciolli, André; Sarmento, Carlos Alberto Palmeira; Fratini, Paula; José Piantino Ferreira, Antônio; Miglino, Maria Angélica

    2013-12-01

    Birds occupy a prominent place in the Brazilian economy not only in the poultry industry but also as an animal model in many areas of scientific research. Thus the aim of this study was to provide a description of macro and microscopic aspects of the ectoderm-derived structures in chicken embryos / fetuses poultry (Gallus gallus domesticus) from 1st to 19th day of incubation. 40 fertilized eggs, from a strain of domestic chickens, with an incubation period of 2-19 days were subjected to macroscopic description, biometrics, light, and scanning microscopy. All changes observed during the development were described. The nervous system, skin and appendages and organs related to vision and hearing began to be identified, both macro and microscopically, from the second day of incubation. The vesicles from the primitive central nervous system-forebrain, midbrain, and hindbrain-were identified on the third day of incubation. On the sixth day of incubation, there was a clear vascularization of the skin. The optic vesicle was first observed fourth day of development and on the fifth day there was the beginning of the lens formation. Although embryonic development is influenced by animal line as well as external factors such as incubation temperature, this paper provides a chronological description for chicken (Gallus gallus domesticus) during its embryonic development. PMID:24019213

  6. Polarizabilities and second hyperpolarizabilities of hydrogen chains using the spin-component-scaled Møller-Plesset second-order method

    NASA Astrophysics Data System (ADS)

    Champagne, Benoît; Kirtman, Bernard

    Static longitudinal polarizabilities (α) and second hyperpolarizabilities (γ) of model H2 chains have been calculated at different ab initio levels to address the performance of the recently proposed spin-component-scaled MP2 (SCS-MP2) method (Grimme, J. Chem Phys 2003, 118, 9095). For both α and γ, the SCS-MP2 method improves over the MP2 results in comparison with reference values evaluated at the CCSD(T) level. Differences from the reference are in the range of 4-6% for α and 1-4% for γ. In the case of γ, the SCS-MP2 scheme improves not only over MP2 but also MP4 and CCSD. Further studies are needed on π-conjugated systems to evaluate the generality of these results.

  7. PROCEEDINGS: JOINT SYMPOSIUM ON DRY SO2 AND SIMULTANEOUS SO2/NOX CONTROL TECHNOLOGIES (1ST). VOLUME 1. FUNDAMENTAL RESEARCH AND PROCESS DEVELOPMENT

    EPA Science Inventory

    Forty six papers describing recent advances in dry sorbent injection technologies for SO2 control were presented at the 1st Joint Symposium on Dry SO2 and Simultaneous SO2/NOx Control Technologies. These papers covered the following topics: fundamental research; pilot-scale devel...

  8. The Impact of Gender-Fair versus Gender-Stereotyped Basal Readers on 1st-Grade Children's Gender Stereotypes: A Natural Experiment

    ERIC Educational Resources Information Center

    Karniol, Rachel; Gal-Disegni, Michal

    2009-01-01

    Israeli 1st-grade children in two different schools in the same neighborhood who were using either a gender-stereotyped or a gender-fair basal reader were asked to judge for a series of female-stereotyped, male-stereotyped, and gender-neutral activities whether they were characteristic of females, of males, or of both. Children using the…

  9. Moving beyond the Lone Scientist: Helping 1st-Grade Students Appreciate the Social Context of Scientific Work Using Stories about Scientists

    ERIC Educational Resources Information Center

    Sharkawy, Azza

    2009-01-01

    While several studies have documented young children's (K-2) stereotypic views of scientists and scientific work, few have examined students' views of the social nature of scientific work and the strategies effective in broadening these views. The purpose of this study is to examine how stories about scientists influence 1st-grade students' views…

  10. Diagnostic Online Assessment of Basic IT Skills in 1st-Year Undergraduates in the Medical Sciences Division, University of Oxford

    ERIC Educational Resources Information Center

    Sieber, Vivien

    2009-01-01

    Attitude, experience and competence (broadly covered by the European Computer Driving Licence syllabus) in information technology (IT) were assessed in 846 1st-year Medical Sciences Division undergraduates (2003-06) at the start of their first term. Online assessments delivered during induction workshops were presented as an opportunity for…

  11. Small airway dysfunction by impulse oscillometry in asthmatic patients with normal forced expiratory volume in the 1st second values.

    PubMed

    Pisi, Roberta; Tzani, Panagiota; Aiello, Marina; Martinelli, Enrico; Marangio, Emilio; Nicolini, Gabriele; Olivieri, Dario; Chetta, Alfredo

    2013-01-01

    Small airways are relevant to the pathophysiology of asthma. We investigated whether in asthmatic patients with normal forced expiratory volume in the 1st second (FEV(1)) values, impulse oscillometry system (IOS), as a measure of small airway function, contributed additional information to spirometry either at baseline or after bronchodilator, and whether it was related to the disease control. The fall in resistance from 5 to 20 Hz (R5-R20) and reactance at 5 Hz (X5) by IOS and spirometry measures of small airway function (forced expiratory flow at 25-75% [FEF(25-75)] and forced vital capacity/slow inspiratory vital capacity [FVC/SVC]) at baseline and after 400 micrograms of salbutamol were prospectively measured in 33 asthmatic patients (18 women; age range, 18-66 years). Disease control was assessed by the Asthma Control Test (ACT). R5-R20 but not X5 values were significantly related to FEF(25-75) and FVC/SVC values (p < 0.05 for both correlations). When the bronchodilator response was assessed, no correlation was found among IOS and spirometry changes. ACT scores were related to R5-R20, FEF(25-75), and FVC/SVC values (p < 0.01 for all correlations). In asthmatic patients with normal FEV(1) values, R5-R20 values were related to spirometry measures of small airway function. However, when the bronchodilator response was assessed, IOS and spirometry provided quite different results. Moreover, small airway dysfunction, as assessed by IOS and spirometry, was associated with poor disease control and history of asthma exacerbations. The results of this study confirm the value of IOS, as an investigative tool, and suggest that in asthmatic patients with normal FEV(1) values and poor disease control, small airway function should be investigated. PMID:23406931

  12. New approaches for improving the production of the 1st and 2nd generation ethanol by yeast.

    PubMed

    Kurylenko, Olena; Semkiv, Marta; Ruchala, Justyna; Hryniv, Orest; Kshanovska, Barbara; Abbas, Charles; Dmytruk, Kostyantyn; Sibirny, Andriy

    2016-01-01

    Increase in the production of 1st generation ethanol from glucose is possible by the reduction in the production of ethanol co-products, especially biomass. We have developed a method to reduce biomass accumulation of Saccharomyces cerevisiae by the manipulation of the intracellular ATP level due to overexpression of genes of alkaline phosphatase, apyrase or enzymes involved in futile cycles. The strains constructed accumulated up to 10% more ethanol on a cornmeal hydrolysate medium. Similar increase in ethanol accumulation was observed in the mutants resistant to the toxic inhibitors of glycolysis like 3-bromopyruvate and others. Substantial increase in fuel ethanol production will be obtained by the development of new strains of yeasts that ferment sugars of the abundant lignocellulosic feedstocks, especially xylose, a pentose sugar. We have found that xylose can be fermented under elevated temperatures by the thermotolerant yeast, Hansenula polymorpha. We combined protein engineering of the gene coding for xylose reductase (XYL1) along with overexpression of the other two genes responsible for xylose metabolism in yeast (XYL2, XYL3) and the deletion of the global transcriptional activator CAT8, with the selection of mutants defective in utilizing ethanol as a carbon source using the anticancer drug, 3-bromopyruvate. Resulted strains accumulated 20-25 times more ethanol from xylose at the elevated temperature of 45°C with up to 12.5 g L(-1) produced. Increase in ethanol yield and productivity from xylose was also achieved by overexpression of genes coding for the peroxisomal enzymes: transketolase (DAS1) and transaldolase (TAL2), and deletion of the ATG13 gene. PMID:26619255

  13. Ichnological analysis of the Upper Miocene in the ANH-Tumaco-1-ST-P well: assessing paleoenvironmental conditions at the Tumaco Basin, in the Colombian Pacific

    NASA Astrophysics Data System (ADS)

    Giraldo-Villegas, Carlos A.; Celis, Sergio A.; Rodríguez-Tovar, Francisco J.; Pardo-Trujillo, Andrés; Vallejo-Hincapié, Diego F.; Trejos-Tamayo, Raúl A.

    2016-11-01

    Tumaco is a frontier basin located on the SW Colombian Pacific coast. It is composed of a thick siliciclastic sequence up to reach 10,000 m-thick. In recent years, the National Hydrocarbon Agency-ANH has promoted new exploration wells in order to understand the sedimentary dynamic and its relationship with petroleum systems. One of them, the ANH-Tumaco-1-ST-P well has ∼3000 m (12,000 feet). We carried out sedimentological, geochemical, and micropaleontological detailed analyses with special attention to the ichnology on a 55 m-cored interval (from 1695.3 to 1640.4 m = 5563-5382 ft) in order to assess paleoenvironmental conditions. Beds are composed of green and gray mudrocks interbedded with lithic sandstones and fine-grained tuffs. Calcareous microfossil assemblages defined by the recovery of Uvigerina carapitana, Uvigerina laviculata, Uvigerina pigmaea, Globigerina woodi,Globigerionoides obliquus, Discoaster bellus gr., Catinaster coalitus, Reticulofenestra pseudoumbilicus and Sphenolithus abies indicated a Tortonian age, between CN6/CN7 biozones. Six sedimentary facies were identified: (1, 2) massive and laminated mudrocks, (3, 4) massive and normal-graded sandstones, (5) heterolithic beds, and in some cases (6) sandstones with soft-deformation structures. These rocks were accumulated in a shallowing platform-prodelta environment with continuous volcanic influence. Ichnotaxonomic analysis, conducted for the first time in the Colombian Pacific, allowed the identification of eighteen ichnogenera: Alcyonidiopsis, Asterosoma, Chondrites, Conichnus, Cylindrichnus, Diplocraterion, Ophiomorpha, Palaeophycus, Phycosiphon, Planolites, Rhyzocorallium, Schaubcylindrichnus, Scolicia, Siphonichnus, Taeinidum, Teichichnus, Thalassinoides, and Zoophycos. The ichnological association belongs to the archetypal Cruziana ichnofacies and its "distal" expression. By integrating lithofacies and ichnological results, two segments have been distinguished: 1) the lower one (1695

  14. Two-component multi-configurational second-order perturbation theory with Kramers restricted complete active space self-consistent field reference function and spin-orbit relativistic effective core potential

    NASA Astrophysics Data System (ADS)

    Kim, Inkoo; Lee, Yoon Sup

    2014-10-01

    We report the formulation and implementation of KRCASPT2, a two-component multi-configurational second-order perturbation theory based on Kramers restricted complete active space self-consistent field (KRCASSCF) reference function, in the framework of the spin-orbit relativistic effective core potential. The zeroth-order Hamiltonian is defined as the sum of nondiagonal one-electron operators with generalized two-component Fock matrix elements as scalar factors. The Kramers symmetry within the zeroth-order Hamiltonian is maintained via the use of a state-averaged density, allowing a consistent treatment of degenerate states. The explicit expressions are derived for the matrix elements of the zeroth-order Hamiltonian as well as for the perturbation vector. The use of a fully variational reference function and nondiagonal operators in relativistic multi-configurational perturbation theory is reported for the first time. A series of initial calculations are performed on the ionization potential and excitation energies of the atoms of the 6p-block; the results display a significant improvement over those from KRCASSCF, showing a closer agreement with experimental results. Accurate atomic properties of the superheavy elements of the 7p-block are also presented, and the electronic structures of the low-lying excited states are compared with those of their lighter homologues.

  15. PREFACE: 1st International School and Conference "Saint Petersburg OPEN 2014" on Optoelectronics, Photonics, Engineering and Nanostructures

    NASA Astrophysics Data System (ADS)

    2014-09-01

    Dear Colleagues, 1st International School and Conference "Saint Petersburg OPEN 2014" on Optoelectronics, Photonics, Engineering and Nanostructures was held on March 25 - 27, 2014 at St. Petersburg Academic University - Nanotechnology Research and Education Centre of the Russian Academy of Sciences. The School and Conference included a series of invited talks given by leading professors with the aim to introduce young scientists with actual problems and major advances in physics and technology. The keynote speakers were: Mikhail Glazov (Ioffe Physico-Technical Institute RAS, Russia) Vladimir Dubrovskii (Saint Petersburg Academic University RAS, Russia) Alexey Kavokin (University of Southampton, United Kingdom and St. Petersburg State University, Russia) Vladimir Korenev (Ioffe Physico-Technical Institute RAS, Russia) Sergey Kukushkin (Institute of Problems of Mechanical Engineering RAS, Russia) Nikita Pikhtin (Ioffe Physico-Technical Institute RAS, Russia and "Elfolum" Ltd., Russia) Dmitry Firsov (Saint Petersburg State Polytechnical University, Russia) During the poster session all undergraduate and graduate students attending the conference presented their works. Sufficiently large number of participants with more than 160 student attendees from all over the world allowed the Conference to provide a fertile ground for the fruitful discussions between the young scientists as well as to become a perfect platform for the valuable discussions between student authors and highly experienced scientists. The best student papers, which were selected by the Program Committee and by the invited speakers basing on the theses and their poster presentation, were awarded with diplomas of the conference - see the photos. This year's School and Conference is supported by SPIE (The International Society for Optics and Photonics), OSA (The Optical Society), St. Petersburg State Polytechnical University and by Skolkovo Foundation. It is a continuation of the annual schools and

  16. Creating Research-Rich Learning Experiences and Quantitative Skills in a 1st Year Earth Systems Course

    NASA Astrophysics Data System (ADS)

    King, P. L.; Eggins, S.; Jones, S.

    2014-12-01

    We are creating a 1st year Earth Systems course at the Australian National University that is built around research-rich learning experiences and quantitative skills. The course has top students including ≤20% indigenous/foreign students; nonetheless, students' backgrounds in math and science vary considerably posing challenges for learning. We are addressing this issue and aiming to improve knowledge retention and deep learning by changing our teaching approach. In 2013-2014, we modified the weekly course structure to a 1hr lecture; a 2hr workshop with hands-on activities; a 2hr lab; an assessment piece covering all face-to-face activities; and a 1hr tutorial. Our new approach was aimed at: 1) building student confidence with data analysis and quantitative skills through increasingly difficult tasks in science, math, physics, chemistry, climate science and biology; 2) creating effective learning groups using name tags and a classroom with 8-person tiered tables; 3) requiring students to apply new knowledge to new situations in group activities, two 1-day field trips and assessment items; 4) using pre-lab and pre-workshop exercises to promote prior engagement with key concepts; 5) adding open-ended experiments to foster structured 'scientific play' or enquiry and creativity; and 6) aligning the assessment with the learning outcomes and ensuring that it contains authentic and challenging southern hemisphere problems. Students were asked to design their own ocean current experiment in the lab and we were astounded by their ingenuity: they simulated the ocean currents off Antarctica; varied water density to verify an equation; and examined the effect of wind and seafloor topography on currents. To evaluate changes in student learning, we conducted surveys in 2013 and 2014. In 2014, we found higher levels of student engagement with the course: >~80% attendance rates and >~70% satisfaction (20% neutral). The 2014 cohort felt that they were more competent in writing

  17. 2014 Female Athlete Triad Coalition Consensus Statement on Treatment and Return to Play of the Female Athlete Triad: 1st International Conference held in San Francisco, California, May 2012 and 2nd International Conference held in Indianapolis, Indiana, May 2013.

    PubMed

    De Souza, Mary Jane; Nattiv, Aurelia; Joy, Elizabeth; Misra, Madhusmita; Williams, Nancy I; Mallinson, Rebecca J; Gibbs, Jenna C; Olmsted, Marion; Goolsby, Marci; Matheson, Gordon

    2014-02-01

    The Female Athlete Triad is a medical condition often observed in physically active girls and women, and involves three components: (1) low energy availability with or without disordered eating, (2) menstrual dysfunction and (3) low bone mineral density. Female athletes often present with one or more of the three Triad components, and an early intervention is essential to prevent its progression to serious endpoints that include clinical eating disorders, amenorrhoea and osteoporosis. This consensus statement represents a set of recommendations developed following the 1st (San Francisco, California, USA) and 2nd (Indianapolis, Indiana, USA) International Symposia on the Female Athlete Triad. It is intended to provide clinical guidelines for physicians, athletic trainers and other healthcare providers for the screening, diagnosis and treatment of the Female Athlete Triad and to provide clear recommendations for return to play. The 2014 Female Athlete Triad Coalition Consensus Statement on Treatment and Return to Play of the Female Athlete Triad expert panel has proposed a risk stratification point system that takes into account magnitude of risk to assist the physician in decision-making regarding sport participation, clearance and return to play. Guidelines are offered for clearance categories, management by a multidisciplinary team and implementation of treatment contracts. This consensus paper has been endorsed by the Female Athlete Triad Coalition, an International Consortium of leading Triad researchers, physicians and other healthcare professionals, the American College of Sports Medicine and the American Medical Society for Sports Medicine. PMID:24463911

  18. PREFACE: 1st Nano-IBCT Conference 2011 - Radiation Damage of Biomolecular Systems: Nanoscale Insights into Ion Beam Cancer Therapy

    NASA Astrophysics Data System (ADS)

    Huber, Bernd A.; Malot, Christiane; Domaracka, Alicja; Solov'yov, Andrey V.

    2012-07-01

    The 1st Nano-IBCT Conference entitled 'Radiation Damage in Biomolecular Systems: Nanoscale Insights into Ion Beam Cancer Therapy' was held in Caen, France, in October 2011. The Meeting was organised in the framework of the COST Action MP1002 (Nano-IBCT) which was launched in December 2010 (http://fias.uni-frankfurt.de/nano-ibct). This action aims to promote the understanding of mechanisms and processes underlying the radiation damage of biomolecular systems at the molecular and nanoscopic level and to use the findings to improve the strategy of Ion Beam Cancer Therapy. In the hope of achieving this, participants from different disciplines were invited to represent the fields of physics, biology, medicine and chemistry, and also included those from industry and the operators of hadron therapy centres. Ion beam therapy offers the possibility of excellent dose localization for treatment of malignant tumours, minimizing radiation damage in normal healthy tissue, while maximizing cell killing within the tumour. Several ion beam cancer therapy clinical centres are now operating in Europe and elsewhere. However, the full potential of such therapy can only be exploited by better understanding the physical, chemical and biological mechanisms that lead to cell death under ion irradiation. Considering a range of spatio-temporal scales, the proposed action therefore aims to combine the unique experimental and theoretical expertise available within Europe to acquire greater insight at the nanoscopic and molecular level into radiation damage induced by ion impact. Success in this endeavour will be both an important scientific breakthrough and give great impetus to the practical improvement of this innovative therapeutic technique. Ion therapy potentially provides an important advance in cancer therapy and the COST action MP1002 will be very significant in ensuring Europe's leadership in this field, providing the scientific background, required data and mechanistic insight which

  19. Proceedings of the International Congress on Clinical Pharmacy Education. (1st, Minneapolis, Minnesota, July 13-16, 1976).

    ERIC Educational Resources Information Center

    American Association of Colleges of Pharmacy, Bethesda, MD.

    The proceedings of the First International Congress on Clinical Pharmacy Education, which introduced pharmacy educators from outside of North America to the U.S. clinical pharmacy component of education and practice are presented in more than 20 separate papers. The program's objectives were: (1) to provide a historical overview of the development…

  20. 1st stage seed-cotton cleaning system PM10 emission factors and rates for cotton gins

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This manuscript is part of a series of manuscripts that characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study was...

  1. Moral Judgment and Its Relation to Second-Order Theory of Mind

    ERIC Educational Resources Information Center

    Fu, Genyue; Xiao, Wen S.; Killen, Melanie; Lee, Kang

    2014-01-01

    Recent research indicates that moral judgment and 1st-order theory of mind abilities are related. What is not known, however, is how 2nd-order theory of mind is related to moral judgment. In the present study, we extended previous findings by administering a morally relevant theory of mind task (an accidental transgressor) to 4- to 7-year-old…

  2. [Influence of hypocaloric diet with addition of a vitamin-mineral complex on status of patients with obesity 1st and 2nd degrees].

    PubMed

    Sharafetdinov, Kh Kh; Plotnikova, O A; Zykina, V V; Mal'tsev, G Iu; Sokol'nikov, A A; Kaganov, B S

    2011-01-01

    Addition of a vitamin-mineral complex (VMC) to a standard hypocaloric diet leads to a positive dynamics of antropometric characteristics in patients with obesity 1st and 2nd degrees which is comparable to effectiveness of standard dietotherapy (dietary treatment) traditionally used in complex treatment of obesity. Addition of 1,8 mg of vitamin B2 as part of VMC to a hypocaloric diet is shown to be inadequate in eradication of marginal provision of riboflavin when using diets reduced in calories. PMID:22232885

  3. The Earth Microbiome Project: The Meeting Report for the 1st International Earth Microbiome Project Conference, Shenzhen, China, June 13th-15th 2011

    PubMed Central

    Gilbert, Jack A.; Bailey, Mark; Field, Dawn; Fierer, Noah; Fuhrman, Jed A.; Hu, Bin; Jansson, Janet; Knight, Rob; Kowalchuk, George A.; Kyrpides, Nikos C.; Meyer, Folker; Stevens, Rick

    2011-01-01

    This report details the outcome of the 1st International Earth Microbiome Project Conference. The 2-day conference was held at the Kingkey Palace Hotel, Shenzhen, China, on the 14th-15th June 2011, and was hosted by BGI (formally the Beijing Genomics Institute). The conference was arranged as a formal launch for the Earth Microbiome Project, to highlight some of the exciting research projects, results of the preliminary pilot studies, and to provide a discussion forum for the types of technology and experimental approaches that will come to define the standard operating procedures of this project.

  4. Fabrication of Three-Layer-Component Organoclay Hybrid Films with Reverse Deposition Orders by a Modified Langmuir-Schaefer Technique and Their Pyroelectric Currents Measured by a Noncontact Method.

    PubMed

    Hirahara, Masanari; Umemura, Yasushi

    2015-08-01

    In an aqueous clay mineral (montmorillonite) dispersion at a low concentration, isolated clay nanosheets with negative charges were suspended. When a solution of amphiphilic octadecylammonium chloride (ODAH(+)Cl(-)) was spread on an air-dispersion interface, the clay nanosheets were adsorbed on the ODAH(+) cations at the interface to form a stable ultrathin floating film. The floating film was transferred onto a substrate by the Schaefer method, and then the film was immersed in a [Ru(dpp)3]Cl2 (dpp = 4,7-diphenyl-1,10-phenanthroline) solution. The Ru(II) complex cations were adsorbed on the film surface because the film surface possessed a cation-exchange ability. The layers of ODAH(+), clay nanosheets, and [Ru(dpp)3](2+) were deposited in this order. By repeating these procedures, three-layer-component films were fabricated (OCR films). In a similar way, three-layer-component films in which the layers of [Ru(dpp)3](2+), clay nanosheets, and ODAH(+) were deposited in the reverse order (RCO films) were prepared by spreading a [Ru(dpp)3](ClO4)2 solution and immersing the films in an ODAH(+)Cl(-) solution. Both OCR and RCO films were characterized by surface pressure-molecular area (π-A) curve measurements, IR and visible spectroscopy, and the XRD method. The OCR and RCO film systems possessed nearly the same properties in the densities of ODAH(+) and [Ru(dpp)3](2+) and the tilt angle of the Ru(II) complex cation, although the layer distance for the RCO film was a little longer than that for the OCR film and the layered structure for the RCO film was less ordered than that for the OCR film. Pyroelectric currents for the films were measured by a noncontact method using an (241)Am radioactive electrode. When the films were heated, the pyroelectric currents were observed and the current directions for the OCR and RCO films were different. This was clear evidence that the layer order in the OCR film was reverse of that in the RCO film. PMID:26196531

  5. Evidence for age-associated disinhibition of the wake drive provided by scoring principal components of the resting EEG spectrum in sleep-provoking conditions.

    PubMed

    Putilov, Arcady A; Donskaya, Olga G

    2016-01-01

    Age-associated changes in different bandwidths of the human electroencephalographic (EEG) spectrum are well documented, but their functional significance is poorly understood. This spectrum seems to represent summation of simultaneous influences of several sleep-wake regulatory processes. Scoring of its orthogonal (uncorrelated) principal components can help in separation of the brain signatures of these processes. In particular, the opposite age-associated changes were documented for scores on the two largest (1st and 2nd) principal components of the sleep EEG spectrum. A decrease of the first score and an increase of the second score can reflect, respectively, the weakening of the sleep drive and disinhibition of the opposing wake drive with age. In order to support the suggestion of age-associated disinhibition of the wake drive from the antagonistic influence of the sleep drive, we analyzed principal component scores of the resting EEG spectra obtained in sleep deprivation experiments with 81 healthy young adults aged between 19 and 26 and 40 healthy older adults aged between 45 and 66 years. At the second day of the sleep deprivation experiments, frontal scores on the 1st principal component of the EEG spectrum demonstrated an age-associated reduction of response to eyes closed relaxation. Scores on the 2nd principal component were either initially increased during wakefulness or less responsive to such sleep-provoking conditions (frontal and occipital scores, respectively). These results are in line with the suggestion of disinhibition of the wake drive with age. They provide an explanation of why older adults are less vulnerable to sleep deprivation than young adults. PMID:27253971

  6. Clinical Performance of the 1st American Academy of Orthopaedic Surgeons Clinical Guideline on Prevention of Symptomatic Pulmonary Embolism after Total Knee Arthroplasty in Korean Patients

    PubMed Central

    2015-01-01

    We sought to document the clinical performance of the 1st American Academy of Orthopaedic Surgeons (AAOS) guideline on the prevention of symptomatic pulmonary embolism (PE) after total knee arthroplasty (TKA) in Korean patients, in terms of the proportions of the each risk-stratified group, efficacy and safety. Consecutive 328 patients underwent TKA were preoperatively assessed for the risks of PE and bleeding and categorized into 4 groups: 1) standard risk, 2) high risk for PE, 3) high risk for bleeding, and 4) high risks both for PE and bleeding. One of three options was administered according to the groups (aspirin in group 1 or 4; enoxaparin and following aspirin in group 2; antithrombotic stocking in group 3). Incidences of symptomatic deep vein thrombosis (DVT) and PE, and major or minor bleeding complications were evaluated. Majority of the patients (86%) were assessed to be with standard risks both for PE and bleeding. No patient experienced symptomatic DVT or PE and major bleeding. Eleven percent of the patients discontinued chemoprophylaxis because of bleeding-related wound complication. In conclusion, the 1st AAOS guideline functions successfully in Korean patients undergoing TKA in terms of prevention of symptomatic DVT and PE while avoiding major bleeding complications. PMID:26713064

  7. COERC 2002: Appreciating Scholarship. Proceedings of the Annual College of Education Research Conference (1st, Miami, Florida, April 27, 2002).

    ERIC Educational Resources Information Center

    Nielsen, Sarah M., Ed.; Rocco, Tonette S., Ed.

    This conference was designed to offer a view to novice scholars of what scholarship is and provide insights on how to share knowledge with others. The keynote speech by Lisa Delpit, "The Role of Scholarship," is not included in this volume. Other conference papers, presented in alphabetical order by first author, include: (1) "Social Studies in…

  8. Weather Education. Proceedings of the International Conference on School and Popular Meteorological Education (1st, Oxford, England, July 1984).

    ERIC Educational Resources Information Center

    Walker, J. M., Ed.

    The First International Conference on School and Popular Meteorological Education was designed to: (1) examine the need for the general public to be educated in science and mathematics in order to live in today's high technological society; (2) note special attributes that meteorology possesses as a vehicle to teach science and mathematics to all…

  9. Current practice of epidemiology in Africa: highlights of the 3rd conference of the African epidemiological association and 1st conference of the Cameroon society of epidemiology, Yaoundé, Cameroon, 2014

    PubMed Central

    Nkwescheu, Armand Seraphin; Fokam, Joseph; Tchendjou, Patrice; Nji, Akindeh; Ngouakam, Hermann; Andre, Bita Fouda; Joelle, Sobngwi; Uzochukwu, Benjamin; Akinroye, Kingsley; Mbacham, Wilfred; Colizzi, Vittorio; Leke, Rose; Victora, Cesar

    2015-01-01

    As the study of disease occurrence and health indicators in human populations, Epidemiology is a dynamic field that evolves with time and geographical context. In order to update African health workers on current epidemiological practices and to draw awareness of early career epidemiologists on concepts and opportunities in the field, the 3rd African Epidemiology Association and the 1st Cameroon Society of Epidemiology Conference was organized in June 2-6, 2014 at the Yaoundé Mont Febe Hotel, in Cameroon. Under the theme«Practice of Epidemiology in Africa: Stakes, Challenges and Perspectives», the conference attracted close to five hundred guest and participants from all continents. The two main programs were the pre-conference course for capacity building of African Early Career epidemiologists, and the conference itself, providing a forum for scientific exchanges on recent epidemiological concepts, encouraging the use of epidemiological methods in studying large disease burden and neglected tropical diseases; and highlighting existing opportunities. PMID:26523191

  10. Exogenous attention enhances 2nd-order contrast sensitivity.

    PubMed

    Barbot, Antoine; Landy, Michael S; Carrasco, Marisa

    2011-05-11

    Natural scenes contain a rich variety of contours that the visual system extracts to segregate the retinal image into perceptually coherent regions. Covert spatial attention helps extract contours by enhancing contrast sensitivity for 1st-order, luminance-defined patterns at attended locations, while reducing sensitivity at unattended locations, relative to neutral attention allocation. However, humans are also sensitive to 2nd-order patterns such as spatial variations of texture, which are predominant in natural scenes and cannot be detected by linear mechanisms. We assess whether and how exogenous attention--the involuntary and transient capture of spatial attention--affects the contrast sensitivity of channels sensitive to 2nd-order, texture-defined patterns. Using 2nd-order, texture-defined stimuli, we demonstrate that exogenous attention increases 2nd-order contrast sensitivity at the attended location, while decreasing it at unattended locations, relative to a neutral condition. By manipulating both 1st- and 2nd-order spatial frequency, we find that the effects of attention depend both on 2nd-order spatial frequency of the stimulus and the observer's 2nd-order spatial resolution at the target location. At parafoveal locations, attention enhances 2nd-order contrast sensitivity to high, but not to low 2nd-order spatial frequencies; at peripheral locations attention also enhances sensitivity to low 2nd-order spatial frequencies. Control experiments rule out the possibility that these effects might be due to an increase in contrast sensitivity at the 1st-order stage of visual processing. Thus, exogenous attention affects 2nd-order contrast sensitivity at both attended and unattended locations. PMID:21356228

  11. Exogenous attention enhances 2nd-order contrast sensitivity

    PubMed Central

    Barbot, Antoine; Landy, Michael S.; Carrasco, Marisa

    2011-01-01

    Natural scenes contain a rich variety of contours that the visual system extracts to segregrate the retinal image into perceptually coherent regions. Covert spatial attention helps extract contours by enhancing contrast sensitivity for 1st-order, luminance-defined patterns at attended locations, while reducing sensitivity at unattended locations, relative to neutral attention allocation. However, humans are also sensitive to 2nd-order patterns such as spatial variations of texture, which are predominant in natural scenes and cannot be detected by linear mechanisms. We assess whether and how exogenous attention—the involuntary and transient capture of spatial attention—affects the contrast sensitivity of channels sensitive to 2nd-order, texture-defined patterns. Using 2nd-order, texture-defined stimuli, we demonstrate that exogenous attention increases 2nd-order contrast sensitivity at the attended location, while decreasing it at unattended locations, relative to a neutral condition. By manipulating both 1st- and 2nd-order spatial frequency, we find that the effects of attention depend both on 2nd-order spatial frequency of the stimulus and the observer’s 2nd-order spatial resolution at the target location. At parafoveal locations, attention enhances 2nd-order contrast sensitivity to high, but not to low 2nd-order spatial frequencies; at peripheral locations attention also enhances sensitivity to low 2nd-order spatial frequencies. Control experiments rule out the possibility that these effects might be due to an increase in contrast sensitivity at the 1st-order stage of visual processing. Thus, exogenous attention affects 2nd-order contrast sensitivity at both attended and unattended locations. PMID:21356228

  12. The transient nature of 2nd-order stereopsis.

    PubMed

    Hess, Robert F; Wilcox, Laurie M

    2008-05-01

    There are currently two competing dichotomies used to describe how local stereoscopic information is processed by the human visual system. The first is in terms of the type of the spatial filtering operations used to extract relevant image features prior to stereoscopic analysis (i.e. 1st- vs 2nd-order stereo; [Hess, R. F., & Wilcox, L. M. (1994). Linear and non-linear filtering in stereopsis. Vision Research, 34, 2431-2438]). The second is in terms of the temporal properties of the mechanisms used to process stereoscopic information (i.e. sustained vs transient stereo; [Schor, C. M., Edwards, M., & Pope, D. R. (1998). Spatial-frequency and contrast tuning of the transient-stereopsis system. Vision Research, 38(20), 3057-3068]). Here we compare the dynamics of 1st- and 2nd-order stereopsis using several types of stimuli and find a clear dissociation in which 1st-order stimuli exhibit sustained properties while 2nd-order patterns show more transient properties. Our results and analyses unify and simplify two complimentary bodies of work. PMID:18407312

  13. Effect of milk feed source, frequency of feeding and age at turnout on calf performance, live-weight at mating and 1st lactation milk production

    PubMed Central

    2012-01-01

    Female calves (n = 108) were assigned to 6 cold milk feeding treatments in two experiments for a 70-day period. Live-weight (LW) was measured weekly, with an additional LW taken at day 410 and post-calving for animals in experiment 1. In Experiment 1, the effect of feeding frequency and age of turnout to pasture on calf performance and 1st lactation milk yields were evaluated. The whole milk (WM) feeding treatments applied were (i) once daily feeding (OD), (ii) twice daily feeding (TD), (iii) OD feeding, outdoors at 38 days (ODO). In Experiment 2, the effects of feeding milk replacer (MR) as opposed to WM and age of turnout to pasture on calf performance were evaluated. The treatments applied were (i) OD feeding with WM (OD), (ii) OD feeding with milk replacer (MR) (ODMR), (iii) OD feeding with MR, outdoors at 38 days (ODMRO). Experiment 1: There were no differences (P > 0.05) in LW or average daily gain between TD and OD calves at day 80 or 410. ODO calves had lower LW at day 80 as compared to OD or TD (P < 0.001). Calf LW at day 80 was 86, 89 and 85 kg and at day 410 was 304, 309 and 316 kg for OD, TD and ODO, respectively. Milk feeding frequency or time of calf turnout had no effect on LW post calving, milk composition or 1st lactation milk yields. Experiment 2: Total LW at day 80 was higher (P < 0.05) for ODMR compared to OD or ODMRO calves. Calf LW was 87, 95, and 88 kg for OD, ODMR and ODMRO, respectively. However, LW at day 410 did not differ between treatments. This study showed that while some differences were observed in calf LW at day 80, these differences had no effect on LW at day 410 or 1st lactation milk yield. It can be concluded that calves can be successfully reared when fed OD with WM or MR, indoors and when turned out to pasture at 38 days of age. PMID:23078871

  14. [Evolution of knowledge on blood and its movement. 1st Part. Integration of circulatory doctrine. Iatrophysics of blood].

    PubMed

    de Micheli, Alfredo; Izaguirre-Avila, Raúl

    2004-01-01

    Under the light of the evolution of human knowledge, we present a short historic outline of the integrating steps of the blood circulation doctrine and its components, a starting point for ulterior studies on the function of blood in the economy of an organism. The different steps of the process leading to the integration and diffusion of the blood circulation doctrine are described. These go from the first descriptions of the heart structures by authors of the ancient world to the careful anatomical observations of Renaissance scientists, such as Leonardo da Vinci. Towards the middle of the sixteenth century, the first well-known descriptions of pulmonary circulation were made independently by Miguel Servet and Realdo Colombo. Later, William Harvey, based on the experimental quantitative method according to Galileo's thought, described and studied systemic circulation. The vicissitudes encountered by the circulation doctrine are also disclosed. At the beginning, this concept was rejected by the traditional milieu--such as the Sorbonne of Paris--, but was accepted by the young and innovative researchers in both England and Continental Europe. In the second half of the seventeenth century and the first half of the eighteenth, the blood circulation doctrine was finally accepted and spread throughout Europe and the American continent. Furthermore, this doctrine inspired the medical practice of intravenous injections and blood transfusions. Its evolution, as generally occurs in the evolution of scientific thinking, allowed to reject some believes deeply rooted in the doctrine's constituent structure, i.e., the Renaissance spell of circularity. PMID:15791915

  15. Joint U.S./Japan Conference on Adaptive Structures, 1st, Maui, HI, Nov. 13-15, 1990, Proceedings

    NASA Technical Reports Server (NTRS)

    Wada, Ben K. (Editor); Fanson, James L. (Editor); Miura, Koryo (Editor)

    1991-01-01

    The present volume of adaptive structures discusses the development of control laws for an orbiting tethered antenna/reflector system test scale model, the sizing of active piezoelectric struts for vibration suppression on a space-based interferometer, the control design of a space station mobile transporter with multiple constraints, and optimum configuration control of an intelligent truss structure. Attention is given to the formulation of full state feedback for infinite order structural systems, robustness issues in the design of smart structures, passive piezoelectric vibration damping, shape control experiments with a functional model for large optical reflectors, and a mathematical basis for the design optimization of adaptive trusses in precision control. Topics addressed include approaches to the optimal adaptive geometries of intelligent truss structures, the design of an automated manufacturing system for tubular smart structures, the Sandia structural control experiments, and the zero-gravity dynamics of space structures in parabolic aircraft flight.

  16. Experimental First Order Pairing Phase Transition in Atomic Nuclei

    NASA Astrophysics Data System (ADS)

    Moretto, L. G.; Larsen, A. C.; Giacoppo, F.; Guttormsen, M.; Siem, S.

    2015-02-01

    The natural log of experimental nuclear level densities at low energy is linear with energy. This can be interpreted in terms of a nearly 1st order phase transition from a superfluid to an ideal gas of quasi particles. The transition temperature coincides with the BCS critical temperature and yields gap parameters in good agreement with the values extracted from even- odd mass differences from rotational states. This converging evidence supports the relevance of the BCS theory to atomic nuclei.

  17. Spatial epidemiology in zoonotic parasitic diseases: insights gained at the 1st International Symposium on Geospatial Health in Lijiang, China, 2007

    PubMed Central

    Zhou, Xiao-Nong; Lv, Shan; Yang, Guo-Jing; Kristensen, Thomas K; Bergquist, N Robert; Utzinger, Jürg; Malone, John B

    2009-01-01

    The 1st International Symposium on Geospatial Health was convened in Lijiang, Yunnan province, People's Republic of China from 8 to 9 September, 2007. The objective was to review progress made with the application of spatial techniques on zoonotic parasitic diseases, particularly in Southeast Asia. The symposium featured 71 presentations covering soil-transmitted and water-borne helminth infections, as well as arthropod-borne diseases such as leishmaniasis, malaria and lymphatic filariasis. The work made public at this occasion is briefly summarized here to highlight the advances made and to put forth research priorities in this area. Approaches such as geographical information systems (GIS), global positioning systems (GPS) and remote sensing (RS), including spatial statistics, web-based GIS and map visualization of field investigations, figured prominently in the presentation. PMID:19193214

  18. JANNAF 25th Airbreathing Propulsion Subcommittee, 37th Combustion Subcommittee and 1st Modeling and Simulation Subcommittee Joint Meeting. Volume 1

    NASA Technical Reports Server (NTRS)

    Fry, Ronald S.; Becker, Dorothy L.

    2000-01-01

    Volume I, the first of three volumes, is a compilation of 24 unclassified/unlimited-distribution technical papers presented at the Joint Army-Navy-NASA-Air Force (JANNAF) 25th Airbreathing Propulsion Subcommittee, 37th Combustion Subcommittee and 1st Modeling and Simulation Subcommittee (MSS) meeting held jointly with the 19th Propulsion Systems Hazards Subcommittee. The meeting was held 13-17 November 2000 at the Naval Postgraduate School and Hyatt Regency Hotel, Monterey, California. Topics covered include: a Keynote Address on Future Combat Systems, a review of the new JANNAF Modeling and Simulation Subcommittee, and technical papers on Hyper-X propulsion development and verification; GTX airbreathing launch vehicles; Hypersonic technology development, including program overviews, fuels for advanced propulsion, ramjet and scramjet research, hypersonic test medium effects; and RBCC engine design and performance, and PDE and UCAV advanced and combined cycle engine technologies.

  19. Traumatic Floating 1st Metacarpal in a 14-Year-Old Boy Managed by Close Reduction and Thumb Spica Immobilization: A Rare Case Report

    PubMed Central

    Tyagi, Himanshu Ravindra; Kamat, Nandan; Wajekar, Sagar; Mandalia, Saumil H

    2014-01-01

    Introduction: Double dislocation of thumb metacarpal (MC) is a rare injury which may be secondarily complicated by growth plate injury in children. The management of floating 1st MC is also controversial since the treatment ranges from simple reduction to complex reconstruction surgeries. It is also important to understand the long-term results of different management strategies (close reduction, K-wire fixation, ligament reconstruction) as any residual stiffness or instability of thumb may result in severe disability of the hand. Case Report: A 14-year-old boy with an alleged history of injury to the thumb due to a fall. The postulated mechanism of injury was forced hyperextension of thumb and axial loading of hand in the prone position. On examination, there was prominent bony swelling over the dorsal aspect of carpometacarpal (CMC) and metacarpophalangeal (MCP) joints which was very tender with diffuse swelling over entire thumb. X-ray showed dorsal dislocation of both MCP and CMC joints, without any fracture (bony avulsion) or volar plate avulsion. Treatment was by way of closed reduction performed by axial traction followed by forced flexion at MCP joint with continuous pressure over the dorsal aspect of the joint. The reduction of CMC joint was done by direct pressure over the dorsal aspect and full abduction of thumb. Following reduction, the thumb was immobilized in a thumb spica. Conclusion: Thus, we conclude it is possible to manage a case of floating 1st MC by closed reduction and immobilization, using proper reduction technique. However, a careful clinical and radiological assessment should be done beforehand for signs of bony injury or ligamentous instability. PMID:27299001

  20. Superacid Catalyzed Coal Conversion Chemistry. 1st and 2nd Quarterly Technical Progress Reports, September 1, 1983-March 30, 1984.

    DOE R&D Accomplishments Database

    Olah, G. A.

    1984-01-01

    In our laboratories we have previously developed a mild coal conversion process. This involves the use of a superacid system consisting of HF and BF{sub 3} in presence of hydrogen and/or a hydrogen donor solvent. In order to understand the chemistry involved in the process of depolymerization of coal by the HF:BF{sub 3}:H{sub 2} system we are carrying out a systematic study of a number of coal model compounds. The model compounds selected for present study have two benzene rings connected with various bridging units such as alkylidene, ether, sulfide etc. From studies so far carried out it appears that high pyridine extractibilities achieved by treating coal at temperature below 100 degrees C results from the cleavage of bridges such as present in bibenzyl, diphenyl methane, dibenzyl ether, dibenzyl sulfide etc. On the other hand the increased cyclohexane extractibility and distillability observed at relatively higher temperatures and hydrogen pressures reflects the hydrogenation and cleavage of the aromatic backbone in coal structure similar to what is seen in the conversion of model compounds such as biphenyl, diphenyl ether, diphenyl sulfide, anthracene, etc.

  1. Preparing for introduction of a dengue vaccine: recommendations from the 1st Dengue v2V Asia-Pacific Meeting.

    PubMed

    Lam, Sai Kit; Burke, Donald; Capeding, Maria Rosario; Chong, Chee Keong; Coudeville, Laurent; Farrar, Jeremy; Gubler, Duane; Hadinegoro, Sri Rezeki; Hanna, Jeffrey; Lang, Jean; Lee, Han Lim; Leo, Yee Sin; Luong, Chan Quang; Mahoney, Richard; McBride, John; Mendez-Galvan, Jorge; Ng, Lee Ching; Nimmannitya, Suchitra; Ooi, Eng Eong; Shepard, Donald; Smit, Jaco; Teyssou, Rémy; Thomas, Laurent; Torresi, Joseph; Vasconcelos, Pedro; Wirawan, Dewa Nyoman; Yoksan, Sutee

    2011-11-28

    Infection with dengue virus is a major public health problem in the Asia-Pacific region and throughout tropical and sub-tropical regions of the world. Vaccination represents a major opportunity to control dengue and several candidate vaccines are in development. Experts in dengue and in vaccine introduction gathered for a two day meeting during which they examined the challenges inherent to the introduction of a dengue vaccine into the national immunisation programmes of countries of the Asia-Pacific. The aim was to develop a series of recommendations to reduce the delay between vaccine licensure and vaccine introduction. Major recommendations arising from the meeting included: ascertaining and publicising the full burden and cost of dengue; changing the perception of dengue in non-endemic countries to help generate global support for dengue vaccination; ensuring high quality active surveillance systems and diagnostics; and identifying sustainable sources of funding, both to support vaccine introduction and to maintain the vaccination programme. The attendees at the meeting were in agreement that with the introduction of an effective vaccine, dengue is a disease that could be controlled, and that in order to ensure a vaccine is introduced as rapidly as possible, there is a need to start preparing now. PMID:21864627

  2. Variation of the intensity of the Earth's magnetic field in Portugal in the 1st millennium BC

    NASA Astrophysics Data System (ADS)

    Nachasova, I. E.; Burakov, K. S.

    2009-07-01

    The study of magnetization of the ceramic material from 21 archeological monuments of Portugal (the Evora province), dated archeologically from the Bronze Age to the end of the Iron Age has been carried out. For the purpose of more detailed timing of the material from the monuments the method of ceramic age dating on the basis of its porosity has been used. In order to take into account the distorted factors in the determination of the parameters of the ancient geomagnetic field with the aim of the maximal approximation to the actual values the diagnostic features of magnetite weathering have been considered and the level of weathering of the magnetic fraction in the ceramics from archeological monuments has been determined. The data of geomagnetic field-strength variation in the time interval of the 12th century BC to the beginning of the Common Era have been obtained. The field-strength at this time interval varied in the range of 60-90 micro Tesla with the maximal values in the 9th, 8th, and the second half of the 5th to the beginning of the 4th century BC. In addition, the timing of the ceramic material from the urns of the megalithic complex Monte de Tera of the Evora province has been clarified.

  3. PREFACE: 1st METECH workshop - From deep-sea to coastal zones: Methods and Techniques for studying Palaeoenvironments

    NASA Astrophysics Data System (ADS)

    Veiga-Pires, C.; St-Onge, G.

    2008-10-01

    Reconstructing past climate and past ocean circulation demands the highest possible precision and accuracy which urges the scientific community to look at different sediment records such as the ones from coastal zones to deep-sea with a more complete set of technical and methodological tools. However, the information given by each tool varies in precision, accuracy and in significance according to their environmental settings. It is therefore essential to compare tools. With that in mind, and as part of the International year of Planet Earth, a workshop entitled `From deep-sea to coastal zones: Methods and Techniques for studying palaeoenvironments' took place in Faro (Portugal), from 25-29 February 2008 in order to: present several methods and techniques that can be used for studying sediments from deep-sea to coastal zones, namely for reconstructing palaeoenvironments in order to document past climatic changes and short to long-term environmental processes; allow cross experience between different fields and specialties, either from deep-sea to coastal zones or from micropaleontology to geochemistry; give the opportunity to students from different universities and countries to attend the workshop; publish a special volume on the presented methods and techniques during the workshop. The workshop was organized in four non-parallel sessions dealing with the use of micropaleontology, isotopes, biogeochemistry and sedimentology, as tools for palaeoenvironmental studies. The present IOP Conference Series: Earth and Environmental Science proceedings reflect this organization and papers are published in each theme. The papers are either short reviews or case studies and are highlighted below. The remains of microorganisms found in sediments are the main proxies used in micropaleontological studies. However, the link between fossilized remains and their living origin is not easy to reconstruct only based on the geologic/sedimentary record. Accordingly, Barbosa presents a

  4. 78 FR 60252 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Advance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-01

    ... Five-year (``Sunset'') Reviews of Antidumping and Countervailing Duty Orders; Policy Bulletin, 63 FR...) (3rd Review). Ferrovanadium from South Africa (A-791-815) David Goldberger, (202) 482-4136. (2nd Review... Innerspring Units from South Africa David Goldberger, (202) 482-4136. (A-791-821) (1st Review)....

  5. Construction and 1st Experiment of the 500-meter and 1000-meter DC Superconducting Power Cable in Ishikari

    NASA Astrophysics Data System (ADS)

    Yamaguchi, S.; Ivanov, Y.; Watanabe, H.; Chikumoto, N.; Koshiduka, H.; Hayashi, K.; Sawamura, T.

    Ishikari project constructs two lines. The length of the Line 1 is 500 m, and connects the photovoltaic cell to the internet-data center. The other line is 1 km length, and it is a test facility and called Line 2. The structures of the cable systems are not same to test their performance. The construction was started from 2014 in the field, the Line 1 was completed in May 2015, and it was cooled down and do the current experiment, and warmed up. The Line 2 is almost complete in October 2015. It will be tested in November and December, 2015. In order to reduce the stress of the cable induced by the thermal expansion and contraction, we adopted the way of the helical deformation of the cable. The force of the cable is reduced to 1/3 of an usual cable test. Because the cryogenic pipes are welded in the field and we cannot use the baking of the vacuum chamber of the cryogenic pipe, a new vacuum pumping method was proposed and tested for the cryogenic pipe. Since the straight pipes are used to compose the cryogenic pipe, the pressure drop of the circulation would be 1/100 of the corrugated pipe in the present condition, and it is suitable for longer cable system. The heat leak of the cryogenic pipe is ∼1.4W/m including the cable pipe's and the return pipe's. The heat leak of the current lead is ∼30W/kA in the test bench. Finally the current of 6kA/3 sec and the current of 5kA/15 min were achieved in Line 1. The reduction of heat leak will be a major subject of the longer cable system. The cost of the construction will be almost twice higher than that of the copper and aluminum over-head line with the iron tower in the present Japan. The cost construction of the over-head line is an average value, and depends on the newspaper.

  6. Climate, people, fire and vegetation: new insights into vegetation dynamics in the Eastern Mediterranean since the 1st century AD

    NASA Astrophysics Data System (ADS)

    Bakker, J.; Paulissen, E.; Kaniewski, D.; Poblome, J.; De Laet, V.; Verstraeten, G.; Waelkens, M.

    2012-08-01

    Ottoman times. The pollen data reveals that the old model of a fast rise in Pinus pollen after the end of the Beyşehir Occupation Phase is not necessarily accurate. The notion of high Pinus pollen percentages indicating an open landscape incapable of countering the influx of pine pollen is also deemed unrealistic. While multiple fires occurred in the region through time, they were never a major influence on vegetation dynamics and were mostly linked to increased abundance of pine forests, rather than the presence of human impact or of specifically wet or dry environmental conditions. While this study reveals much new information concerning the impact of climate change and human occupation on the environment, more studies from SW turkey are required in order to properly quantify the range of the observed phenomena and the magnitude of their impacts.

  7. Volume 1, 1st Edition, Multiscale Tailoring of Highly Active and Stable Nanocomposite Catalysts, Final Technical Report

    SciTech Connect

    Veser, Goetz

    2009-08-31

    Nanomaterials have gained much attention as catalysts since the discovery of exceptional CO oxidation activity of nanoscale gold by Haruta. However, many studies avoid testing nanomaterials at the high-temperatures relevant to reactions of interest for the production of clean energy (T > 700°C). The generally poor thermal stability of catalytically active noble metals has thus far prevented significant progress in this area. We have recently overcome the poor thermal stability of nanoparticles by synthesizing a platinum barium-hexaaluminate (Pt-BHA) nanocomposite which combines the high activity of noble metal nanoparticles with the thermal stability of hexaaluminates. This Pt-BHA nanocomposite demonstrates excellent activity, selectivity, and long-term stability in CPOM. Pt-BHA is anchored onto a variety of support structures in order to improve the accessibility, safety, and reactivity of the nanocatalyst. Silica felts prove to be particularly amenable to this supporting procedure, with the resulting supported nanocatalyst proving to be as active and stable for CPOM as its unsupported counterpart. Various pre-treatment conditions are evaluated to determine their effectiveness in removing residual surfactant from the active nanoscale platinum particles. The size of these particles is measured across a wide temperature range, and the resulting “plateau” of stability from 600-900°C can be linked to a particle caging effect due to the structure of the supporting ceramic framework. The nanocomposites are used to catalyze the combustion of a dilute methane stream, and the results indicate enhanced activity for both Pt-BHA as well as ceria-doped BHA, as well as an absence of internal mass transfer limitations at the conditions tested. In water-gas shift reaction, nanocomposite Pt-BHA shows stability during prolonged WGS reaction and no signs of deactivation during start-up/shut-down of the reactor. The chemical and thermal stability, low molecular weight, and

  8. Climate, people, fire and vegetation: new insights into vegetation dynamics in the Eastern Mediterranean since the 1st century AD

    NASA Astrophysics Data System (ADS)

    Bakker, J.; Paulissen, E.; Kaniewski, D.; Poblome, J.; De Laet, V.; Verstraeten, G.; Waelkens, M.

    2013-01-01

    times. The pollen data reveal that a fast rise in Pinus pollen after the end of the Beyşehir Occupation Phase need not always occur. The notion of high Pinus pollen percentages indicating an open landscape incapable of countering the influx of pine pollen is also deemed unrealistic. While multiple fires occurred in the region through time, extended fire periods, as had occurred during the Bronze Age and Beyşehir Occupation Phase, did not occur, and no signs of local fire activity were observed. Fires were never a major influence on vegetation dynamics. While no complete overview of post-BO Phase fire events can be presented, the available data indicates that fires in the vicinity of Gravgaz may have been linked to anthropogenic activity in the wider surroundings of the marsh. Fires in the vicinity of Bereket appeared to be linked to increased abundance of pine forests. There was no link with specifically wet or dry environmental conditions at either site. While this study reveals much new information concerning the impact of climate change and human occupation on the environment, more studies from SW Turkey are required in order to properly quantify the range of the observed phenomena and the magnitude of their impacts.

  9. Prominent Higher-Order Contributions to Electronic Recombination

    SciTech Connect

    Beilmann, C.; Mokler, P. H.; Bernitt, S.; Keitel, C. H.; Ullrich, J.; Lopez-Urrutia, J. R. Crespo; Harman, Z.

    2011-09-30

    Intershell higher-order (HO) electronic recombination is reported for highly charged Ar, Fe, and Kr ions, where simultaneous excitation of one K-shell electron and one or two additional L-shell electrons occurs upon resonant capture of a free electron. For the mid-Z region, HO resonance strengths grow unexpectedly strong with decreasing atomic number Z ({proportional_to}Z{sup -4}), such that, for Ar ions the 2nd-order overwhelms the 1st-order resonant recombination considerably. The experimental findings are confirmed by multiconfiguration Dirac-Fock calculations including hitherto neglected excitation pathways.

  10. Putting the Students 1st

    ERIC Educational Resources Information Center

    Ziegler, Elizabeth

    2005-01-01

    This article profiles Randy Jensen, the 2005 MetLife/NASSP National Middle Level Principal of the Year. As the principal of William Thomas Middle School in American Falls, Idaho, Jensen is a committed advocate for his students as they grapple with the challenges that come with being an adolescent and has adopted an open-door policy with his school…

  11. GALEX 1st Light Compilation

    NASA Technical Reports Server (NTRS)

    2003-01-01

    This compilation shows the constellation Hercules, as imaged on May 21 and 22 by NASA's Galaxy Evolution Explorer. The images were captured by the two channels of the spacecraft camera during the mission's 'first light' milestone.

    The Galaxy Evolution Explorer first light images are dedicated to the crew of the Space Shuttle Columbia. The Hercules region was directly above Columbia when it made its last contact with NASA Mission Control on February 1, over the skies of Texas.

    The Galaxy Evolution Explorer launched on April 28 on a mission to map the celestial sky in the ultraviolet and determine the history of star formation in the universe over the last 10 billion years.

  12. Order Up

    ERIC Educational Resources Information Center

    Gibeault, Michael

    2005-01-01

    Change orders. The words can turn the stomachs of administrators. Horror stories about change orders create fear and distrust among school officials, designers and builders. Can change orders be avoided? If car manufacturers can produce millions of intricately designed vehicles, why can't the same quality control be achieved on a construction…

  13. First and second-order-motion perception after focal human brain lesions

    PubMed Central

    Rizzo, Matthew; Nawrot, Mark; Sparks, JonDavid; Dawson, Jeffrey

    2011-01-01

    Perception of visual motion includes a 1st-order mechanism sensitive to luminance changes and a 2nd-order motion mechanism sensitive to contrast changes. We studied neural substrates for these motion types in 142 subjects with visual cortex lesions, 68 normal controls and 28 brain lesion controls. On 1st-order motion, the visual cortex lesion group performed significantly worse than normal controls overall and in each hemifield, but 2nd-order motion did not differ. Only 1 individual showed a selective 2nd-order motion deficit. Motion deficits were seen with lesions outside the small occipitotemporal region thought to contain a human homolog of motion processing area MT (V5), suggesting that many areas of human brain process visual motion. PMID:18440580

  14. Brain components

    MedlinePlus Videos and Cool Tools

    The brain is composed of more than a thousand billion neurons. Specific groups of them, working in concert, provide ... of information. The 3 major components of the brain are the cerebrum, cerebellum, and brain stem. The ...

  15. Stable isotopic evidence for diet at the Imperial Roman coastal site of Velia (1st and 2nd centuries AD) in Southern Italy.

    PubMed

    Craig, Oliver E; Biazzo, Marco; O'Connell, Tamsin C; Garnsey, Peter; Martinez-Labarga, Cristina; Lelli, Roberta; Salvadei, Loretana; Tartaglia, Gianna; Nava, Alessia; Renò, Lorena; Fiammenghi, Antonella; Rickards, Olga; Bondioli, Luca

    2009-08-01

    Here we report on a stable isotope palaeodietary study of a Imperial Roman population interred near the port of Velia in Southern Italy during the 1st and 2nd centuries AD. Carbon and nitrogen stable isotope analyses were performed on collagen extracted from 117 adult humans as well as a range of fauna to reconstruct individual dietary histories. For the majority of individuals, we found that stable isotope data were consistent with a diet high in cereals, with relatively modest contributions of meat and only minor contributions of marine fish. However, substantial isotopic variation was found within the population, indicating that diets were not uniform. We suggest that a number of individuals, mainly but not exclusively males, had greater access to marine resources, especially high trophic level fish. However, the observed dietary variation did not correlate with burial type, number of grave goods, nor age at death. Also, individuals buried at the necropolis at Velia ate much less fish overall compared with the contemporaneous population from the necropolis of Portus at Isola Sacra, located on the coast close to Rome. Marine and riverine transport and commerce dominated the economy of Portus, and its people were in a position to supplement their own stocks of fish with imported goods in transit to Rome, whereas at Velia marine exploitation existed side-by-side with land-based economic activities. PMID:19280672

  16. Report on: "The 1st Workshop on National Immunization Programs and Vaccine Coverage in ASEAN Countries, April 30, 2015, Pattaya, Thailand".

    PubMed

    Hattasingh, Weerawan; Pengsaa, Krisana; Thisyakorn, Usa

    2016-03-01

    The 1st Workshop on National Immunization Programs and Vaccine Coverage in Association of Southeast Asian Nations (ASEAN) Countries Group (WNIPVC-ASEAN) held a meeting on April 30, 2015, Pattaya, Thailand under the auspices of the Pediatric Infectious Diseases Society and the World Health Organization (WHO). Reports on the current status and initiatives of the national immunization program (NIP) in each ASEAN countries that attended were presented. These reports along with survey data collected from ministries of health in ASEAN countries NIPs demonstrate that good progress has been made toward the goal of the Global Vaccine Action Plan (GVAP). However, some ASEAN countries have fragile health care systems that still have insufficient vaccine coverage of some basic EPI antigens. Most ASEAN countries still do not have national coverage of some new and underused vaccines, and raising funds for the expansion of NIPs is challenging. Also, there is insufficient research into disease burden of vaccine preventable diseases and surveillance. Health care workers must advocate NIPs to government policy makers and other stakeholders as well as improve research and surveillance to achieve the goals of the GVAP. PMID:26805596

  17. Report from the 1st Cardiovascular Outcome Trial (CVOT) Summit of the Diabetes & Cardiovascular Disease (D&CVD) EASD Study Group.

    PubMed

    Schnell, Oliver; Standl, Eberhard; Catrinoiu, Doina; Genovese, Stefano; Lalic, Nebojsa; Skra, Jan; Valensi, Paul; Ceriello, Antonio

    2016-01-01

    The 1st Cardiovascular Outcome Trial (CVOT) Summit of the Diabetes & Cardiovascular Disease (D&CVD) EASD Study Group was held during the annual meeting on 30 October 2015 in Munich. This summit was organized in light of recently published and numerous ongoing CVOTs on diabetes, which have emerged in response to the FDA and the EMA Guidelines. The CVOT Summit stands as a novel conference setup, with the aim of serving as a reference meeting for all topics related to CVOTs in diabetes. Members of the steering committee of the D&CVD EASD Study Group constitute the backbone of the summit. It included presentations of key results on DPP-4 inhibitors, GLP-1-Analogues, SGLT-2 inhibitors, acarbose and insulins. Diabetologists' and cardiologists' perspective on the potential need of new study designs were also highlighted. Furthermore, panel discussions on the design of CVOTs on diabetes were included in the program. The D&CVD EASD Study Group will continue its activity. In-depth discussions and presentations of new CVOTs like LEADER, will be resumed at the 2nd CVOT on diabetes of the D&CVD EASD Study Group, which will be held from 20-22 October 2016 in Munich ( http://www.dcvd.org). PMID:26892706

  18. Order Nidovirales

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This chapter, entitled "Order Nidovirales", is for inclusion in the Ninth Report of the International Committee on Taxonomy of Viruses (ICTV), to be published as both a single volume text and online. The chapter details the taxonomy of members of the Nidovirus order, including family Arteriviridae o...

  19. PREFACE: 1st International Workshop on Theoretical and Computational Physics: Condensed Matter, Soft Matter and Materials Physics & 38th National Conference on Theoretical Physics

    NASA Astrophysics Data System (ADS)

    2014-09-01

    This volume contains selected papers presented at the 38th National Conference on Theoretical Physics (NCTP-38) and the 1st International Workshop on Theoretical and Computational Physics: Condensed Matter, Soft Matter and Materials Physics (IWTCP-1). Both the conference and the workshop were held from 29 July to 1 August 2013 in Pullman hotel, Da Nang, Vietnam. The IWTCP-1 was a new activity of the Vietnamese Theoretical Physics Society (VTPS) organized in association with the 38th National Conference on Theoretical Physics (NCTP-38), the most well-known annual scientific forum dedicated to the dissemination of the latest development in the field of theoretical physics within the country. The IWTCP-1 was also an External Activity of the Asia Pacific Center for Theoretical Physics (APCTP). The overriding goal of the IWTCP is to provide an international forum for scientists and engineers from academia to share ideas, problems and solution relating to the recent advances in theoretical physics as well as in computational physics. The main IWTCP motivation is to foster scientific exchanges between the Vietnamese theoretical and computational physics community and world-wide scientists as well as to promote high-standard level of research and education activities for young physicists in the country. About 110 participants coming from 10 countries participated in the conference and the workshop. 4 invited talks, 18 oral contributions and 46 posters were presented at the conference. In the workshop we had one keynote lecture and 9 invited talks presented by international experts in the fields of theoretical and computational physics, together with 14 oral and 33 poster contributions. The proceedings were edited by Nguyen Tri Lan, Trinh Xuan Hoang, and Nguyen Ai Viet. We would like to thank all invited speakers, participants and sponsors for making the conference and the workshop successful. Nguyen Ai Viet Chair of NCTP-38 and IWTCP-1

  20. Present status of the global change observation mission 1st - water 'SHIZUKU' (GCOM-W1) and the advanced microwave scanning radiometer 2 (AMSR2)

    NASA Astrophysics Data System (ADS)

    Tsutsui, Hiroyuki; Imaoka, Keiji; Kachi, Misako; Maeda, Takeshi; Kasahara, Marehito; Ito, Norimasa; Oki, Taikan; Shimoda, Haruhisa

    2014-11-01

    The Global Change Observation Mission 1st - Water (CGOM-W1) or "SHIZUKU" was launched on May 18, 2012 (JST) from the JAXA's Tanegashima Space Center. Subsequently, the GCOM-W1 satellite was joined to the NASA's A-train orbit since June 29, 2012 to succeed observation by the Advanced Microwave Scanning Radiometer for EOS (AMSR-E) and to provide combined utilization with other A-train satellites. The Advanced Microwave Scanning Radiometer 2 (AMSR2), which is a successor of AMSR-E, onboard GCOM-W1 has started its scientific observation since July 3, 2012. AMSR-E was halted its scientific observation on October 4, 2011, but has restarted observation in slow antenna rotation rate since December 4, 2012 for cross-calibration with AMSR2. AMSR2 has multi-frequency, total-power microwave radiometer systems with dual polarization channels for all frequency bands, and continues AMSR-E observations: 1) Water vapor, 2) Cloud liquid water, 3) Precipitation, 4) SST, 5) Sea surface wind speed, 6) Sea ice concentration, 7) Snow depth, 8) Soil moisture. JAXA opened the AMSR2's brightness temperature products to the public since January 2013 after initial calibration/validation period by the GCOM-W1 Data Providing Service (https://gcomwl.jaxa.jp/). Thereafter, the retrieval algorithms of standard geophysical products for water vapor, cloud liquid water, precipitation, sea surface temperature, sea surface wind speed, sea ice concentration, snow depth and soil moisture were modified, and JAXA opened these standard geophysical products to the public since May 2013. In this paper, we present the present operation status of AMSR2.

  1. The truth about the 1st cycle Coulombic efficiency of LiNi1/3Co1/3Mn1/3O2 (NCM) cathodes.

    PubMed

    Kasnatscheew, J; Evertz, M; Streipert, B; Wagner, R; Klöpsch, R; Vortmann, B; Hahn, H; Nowak, S; Amereller, M; Gentschev, A-C; Lamp, P; Winter, M

    2016-02-01

    The 1st cycle Coulombic efficiency (CE) of LiNi1/3Co1/3Mn1/3O2 (NCM) at 4.6 V vs. Li/Li(+) has been extensively investigated in NCM/Li half cells. It could be proven that the major part of the observed overall specific capacity loss (in total 36.3 mA h g(-1)) is reversible and induced by kinetic limitations, namely an impeded lithiation reaction during discharge. A measure facilitating the lithiation reaction, i.e. a constant potential (CP) step at the discharge cut-off potential, results in an increase in specific discharge capacity of 22.1 mA h g(-1). This capacity increase during the CP step could be proven as a relithiation process by Li(+) content determination in NCM via an ICP-OES measurement. In addition, a specific capacity loss of approx. 4.2 mA h g(-1) could be determined as an intrinsic reaction to the NCM cathode material at room temperature (RT). In total, less than 10.0 mA h g(-1) (=28% of the overall capacity loss) can be attributed to irreversible reactions, mainly to irreversible structural changes of NCM. Thus, the impact of parasitic reactions, such as oxidative electrolyte decomposition, on the irreversible capacity is negligible and could also be proven by on-line MS. As a consequence, the determination of the amount of extracted Li(+) ("Li(+) extraction ratio") so far has been incorrect and must be calculated by the charge capacity (=delithiation amount) divided by the theoretical capacity. In a NCM/graphite full cell the relithiation amount during the constant voltage (CV) step is smaller than in the half cell, due to irreversible Li(+) loss at graphite. PMID:26771035

  2. Source Process of the Solomon Islands Earthquake of April 1st, 2007 (Mw8.1) Based on SAR Data and its Tectonic Implications

    NASA Astrophysics Data System (ADS)

    Mori, M.; Kato, T.; Furuya, M.; Ochi, T.; Miyazaki, S.; Aoki, Y.

    2008-12-01

    We analyzed SAR (Synthetic Aperture Radar) data to derive the crustal deformation due to the Solomon Islands earthquake (Mw8.1) that occurred on April 1st, 2007. Three tracks that cover the source areas were used and the image data taken before and after the earthquake were processed to make interferograms. Then, we examined the obtained interferograms if the previous two source models that were obtained by seismic wave form inversion analyses could reproduce them. However, none of the models were able to reproduce the crustal deformations derived from the SAR data analysis. Then, we tried to construct a source model that explains the observed crustal deformations well. We considered some geophysical data to constrain the source geometry; the multichannel reflection data and observed vertical deformations using coral reef survey. Considering these lines of evidence, we introduced two possible source geometries; one is single-segment model that assumes only shallow-dipping (10 deg.) main thrust ruptured, and the other is two-segment model that assumes both a high angle spray fault of 30 degree dip and the main thrust fault slipped. The comparison of models based on inversion analyses suggested that the two-segment model would be preferable. This result suggests that the Solomon Islands earthquake would be the first observed earthquake on a steeply dipping splay fault that ruptured off the main converging plate boundary. If this is the case, this earthquake might provide us with an important clue for understanding the mechanisms of land formation such as landward titling of the coastal terraces.

  3. [The clinical significance of reverse redistribution of Tl-201 SPECT at rest in the 1st month after the onset of acute myocardial infarction].

    PubMed

    Umamoto, I; Sugihara, H; Harada, Y; Sawada, T; Matsumuro, A; Matsubara, K; Shiga, K; Nakagawa, T; Oonishi, K; Nakamura, T

    1991-07-01

    The pattern of Thallium-201 reverse redistribution (r-RD) at rest has been reported in some patients with acute myocardial infarction (AMI) in the acute phase. But there is no report of this pattern in the later phase. To investigate the significance of Thallium-201 reverse redistribution in the subacute phase, 37 patients with AMI underwent Thallium-201 SPECT at rest a month after the onset. The patients were classified into three groups visually and 19 of 37 patients (51%) showed the persistent defect pattern (Group PD), and the remaining 18 patients (49%) had the reverse redistribution pattern (Group r-RD). None of them had the redistribution pattern. Coronary reflow was earlier and the incidence of the scintigraphic overlap on Dual SPECT image of 99mTc-PYP/201TlCl in the acute phase was more frequent in Group r-RD than in Group PD. A decrease in thallium defect size of patients with r-RD from the acute phase to one month after the onset represented improvement more significantly than that with PD. Initial %Tl uptake of the infarcted region of Group r-RD was greater than that of Group PD. The degree of stenosis of the infarct-related coronary artery in Group r-RD was less severe than that in Group PD. And corresponding regional wall motion of Group r-RD was less impaired. The Thallium-201 washout in the infarcted region with r-RD was significantly faster than that in the normal region. It is concluded that the r-RD pattern at rest in the 1st month after the onset of AMI may be a sign of viable myocardium. PMID:1833574

  4. Second order Standard Model

    NASA Astrophysics Data System (ADS)

    Espin, Johnny; Krasnov, Kirill

    2015-06-01

    It is known, though not commonly, that one can describe fermions using a second order in derivatives Lagrangian instead of the first order Dirac one. In this description the propagator is scalar, and the complexity is shifted to the vertex, which contains a derivative operator. In this paper we rewrite the Lagrangian of the fermionic sector of the Standard Model in such second order form. The new Lagrangian is extremely compact, and is obtained from the usual first order Lagrangian by integrating out all primed (or dotted) 2-component spinors. It thus contains just half of the 2-component spinors that appear in the usual Lagrangian, which suggests a new perspective on unification. We sketch a natural in this framework SU (2) × SU (4) ⊂ SO (9) unified theory.

  5. A complete theoretical description of the first-order delta-sigma modulation for analog-to-NRZ binary conversion

    NASA Astrophysics Data System (ADS)

    Siahmakoun, A.; Reeves, E.; Costanzo-Caso, P.

    2015-03-01

    A novel photonic analog-to-digital converter (ADC) based on asynchronous delta-sigma modulation (ADSM) has been investigated. The architecture utilizes an optical leaky integrator, optoelectronic bistable quantizer, and positive corrective feedback for a non-interferometric optical implementation of ADSM. The principles of the proposed 1st -order ADSM are mathematically modeled and simulated.

  6. Orthogonal Higher Order Structure and Confirmatory Factor Analysis of the French Wechsler Adult Intelligence Scale (WAIS-III)

    ERIC Educational Resources Information Center

    Golay, Philippe; Lecerf, Thierry

    2011-01-01

    According to the most widely accepted Cattell-Horn-Carroll (CHC) model of intelligence measurement, each subtest score of the Wechsler Intelligence Scale for Adults (3rd ed.; WAIS-III) should reflect both 1st- and 2nd-order factors (i.e., 4 or 5 broad abilities and 1 general factor). To disentangle the contribution of each factor, we applied a…

  7. Component separations.

    PubMed

    Heller, Lior; McNichols, Colton H; Ramirez, Oscar M

    2012-02-01

    Component separation is a technique used to provide adequate coverage for midline abdominal wall defects such as a large ventral hernia. This surgical technique is based on subcutaneous lateral dissection, fasciotomy lateral to the rectus abdominis muscle, and dissection on the plane between external and internal oblique muscles with medial advancement of the block that includes the rectus muscle and its fascia. This release allows for medial advancement of the fascia and closure of up to 20-cm wide defects in the midline area. Since its original description, components separation technique underwent multiple modifications with the ultimate goal to decrease the morbidity associated with the traditional procedure. The extensive subcutaneous lateral dissection had been associated with ischemia of the midline skin edges, wound dehiscence, infection, and seroma. Although the current trend is to proceed with minimally invasive component separation and to reinforce the fascia with mesh, the basic principles of the techniques as described by Ramirez et al in 1990 have not changed over the years. Surgeons who deal with the management of abdominal wall defects are highly encouraged to include this technique in their collection of treatment options. PMID:23372455

  8. Hyperfrequency components

    NASA Astrophysics Data System (ADS)

    1994-09-01

    The document has a collection of 19 papers (11 on technologies, 8 on applications) by 26 authors and coauthors. Technological topics include: evolution from conventional HEMT's double heterojunction and planar types of pseudomorphic HEMT's; MMIC R&D and production aspects for very-low-noise, low-power, and very-low-noise, high-power applications; hyperfrequency CAD tools; parametric measurements of hyperfrequency components on plug-in cards for design and in-process testing uses; design of Class B power amplifiers and millimetric-wave, bigrid-transistor mixers, exemplifying combined use of three major types of physical simulation in electrical modeling of microwave components; FET's for power amplification at up to 110 GHz; production, characterization, and nonlinear applications of resonant tunnel diodes. Applications topics include: development of active modules for major European programs; tubes versus solid-state components in hyperfrequency applications; status and potentialities of national and international cooperative R&D on MMIC's and CAD of hyperfrequency circuitry; attainable performance levels in multifunction MMIC applications; state of the art relative of MESFET power amplifiers (Bands S, C, X, Ku); creating a hyperfrequency functions library, of parametrizable reference cells or macrocells; and design of a single-stage, low-noise, band-W amplifier toward development of a three-stage amplifier.

  9. Data Descriptions and Vertical Structure Plots for Mean, Diurnal, and Semidurnal Components of Eastward and Northward (ordered by Latitude). Mean Winds and Tides over Poker Flat, Alaska (65 Deg N, 147 Deg W), During November 1981

    NASA Technical Reports Server (NTRS)

    Avery, S. K.

    1985-01-01

    The mean zonal and meridional winds and the amplitude and phase structures for the tidal harmonics for the month of November, 1981 are given. The mean winds are weak westerlies and weak southerlies. The westerlies are approximately 10 ms (-1) lower than those during November 1980 and 1982. The diurnal amplitudes are small in both the zonal and meridional wind components. The diurnal phase structures are characteristic of a propagating wave having a ertical wavelength of approximately 50 km. The semidiurnal tidal harmonic amplitudes are slightly larger than the diurnal amplitudes. However, the phase structures are different for the zonal and meridional components. The meridional phase structure appears evanescent. The zonal phase structure has a phase reversal at 88 km with downward phase progression below that level and upward phase progression above that level. The vertical wavelength is roximately 12 km. This short vertical wavelength occurs during other months of the year but longer wavelengths are more common.

  10. Evidence for a genetic component in familial sarcoidosis

    SciTech Connect

    Rybicki, B.A.; Harrington, D.; Major, M.

    1994-09-01

    Sarcoidosis is a disease with reported familial clustering, but a putative hereditary component has not been established. We analyzed 33 sarcoid index cases with a positive family history and their 596 1st and 2nd degree relatives to determine if the distribution of disease was consistent with a genetic etiology. Prevalence of sarcoidosis was twice as high in 1st degree relatives of index cases compared to 2nd degree relatives (8.5% vs. 3.9%; p=0.016). Recurrence risk ratios (defined as the risk of disease in relatives divided by the population prevalence) were calculated in 2nd degree relatives after making an ascertainment correction. A single gene model fit the observed results better than a polygenic model for a range of sarcoidosis prevalance. A greater shared environment among siblings compared to parents and offspring did not appear to increase risk of sarcoidosis based on a higher prevalance of disease in the latter (7.1% vs. 10.7%; p=0.313). However, the age of diagnosis in affected parent-offspring pairs was more consistent with a combined genetic and environmental etiology than either component alone. In summary, these results suggest a genetic component, possibly a single gene, increases disease risk in family members of sarcoidosis cases. A segregation analysis is planned to more thoroughly evaluate the evidence for both genetic and non-genetic transmission of sarcoidosis in these families.

  11. GCS component development cycle

    NASA Astrophysics Data System (ADS)

    Rodríguez, Jose A.; Macias, Rosa; Molgo, Jordi; Guerra, Dailos; Pi, Marti

    2012-09-01

    The GTC1 is an optical-infrared 10-meter segmented mirror telescope at the ORM observatory in Canary Islands (Spain). First light was at 13/07/2007 and since them it is in the operation phase. The GTC control system (GCS) is a distributed object & component oriented system based on RT-CORBA8 and it is responsible for the management and operation of the telescope, including its instrumentation. GCS has used the Rational Unified process (RUP9) in its development. RUP is an iterative software development process framework. After analysing (use cases) and designing (UML10) any of GCS subsystems, an initial component description of its interface is obtained and from that information a component specification is written. In order to improve the code productivity, GCS has adopted the code generation to transform this component specification into the skeleton of component classes based on a software framework, called Device Component Framework. Using the GCS development tools, based on javadoc and gcc, in only one step, the component is generated, compiled and deployed to be tested for the first time through our GUI inspector. The main advantages of this approach are the following: It reduces the learning curve of new developers and the development error rate, allows a systematic use of design patterns in the development and software reuse, speeds up the deliverables of the software product and massively increase the timescale, design consistency and design quality, and eliminates the future refactoring process required for the code.

  12. Component-specific modeling

    NASA Technical Reports Server (NTRS)

    Hirschbein, M. S.

    1982-01-01

    The ability to accurately structurally analyze engine components to assure that they can survive for their designed lifetime in an increasingly harsh environment is discussed. Under the HOST (HOt Section Technology) program, advanced component-specific modeling methods, with built-in analysis capability, will be developed separately for burner liners, turbine blades and vanes. These modeling methods will make maximum use of, but will not rely solely on, existing analysis methods and techniques, to analyze the three identified components. Nor will the complete structural analysis of a component necessarily be performed as a single analysis. The approach to be taken will develop complete software analysis packages with internal, component-specific, self-adaptive solution strategies. Each package will contain a set of modeling and analysis tools. The selection and order of specific methods and techniques within the set to be applied will depend on the specific-component, the current thermo-mechanical loading, and the current state of the component. All modeling and analysis decisions will be made internally based on developed decision criteria within the solution strategies; minimal user intervention will be required.

  13. Discriminant Incoherent Component Analysis.

    PubMed

    Georgakis, Christos; Panagakis, Yannis; Pantic, Maja

    2016-05-01

    Face images convey rich information which can be perceived as a superposition of low-complexity components associated with attributes, such as facial identity, expressions, and activation of facial action units (AUs). For instance, low-rank components characterizing neutral facial images are associated with identity, while sparse components capturing non-rigid deformations occurring in certain face regions reveal expressions and AU activations. In this paper, the discriminant incoherent component analysis (DICA) is proposed in order to extract low-complexity components, corresponding to facial attributes, which are mutually incoherent among different classes (e.g., identity, expression, and AU activation) from training data, even in the presence of gross sparse errors. To this end, a suitable optimization problem, involving the minimization of nuclear-and l1 -norm, is solved. Having found an ensemble of class-specific incoherent components by the DICA, an unseen (test) image is expressed as a group-sparse linear combination of these components, where the non-zero coefficients reveal the class(es) of the respective facial attribute(s) that it belongs to. The performance of the DICA is experimentally assessed on both synthetic and real-world data. Emphasis is placed on face analysis tasks, namely, joint face and expression recognition, face recognition under varying percentages of training data corruption, subject-independent expression recognition, and AU detection by conducting experiments on four data sets. The proposed method outperforms all the methods that are compared with all the tasks and experimental settings. PMID:27008268

  14. Development of China Hydrogeology Exploring Techniques in 30 Years --Comparison of Handbook of Hydrogeology of 1st and 2nd Edition

    NASA Astrophysics Data System (ADS)

    Tong, Y.

    2013-12-01

    Handbook of Hydrogeology (2nd edition) is supported by one program from China Geological Survey (CGS): Research of Technical Methods of Hydrogeological Survey and Revision of Handbook of Hydrogeology. It is a reference book for those who are engaged in hydrogeological survey and research in China and covers fundamental principles, theories, survey and exploring techniques, and traditional experiences and achievements in hydrogeology. By comparing the 1st (1978) and 2nd (2012) edition of Handbook of Hydrogeology (in Chinese), this paper analyses the development of China hydrogeological survey and exploring techniques in last 30 years, especially the great change and progress in survey techniques of hydro-remote sensing and hydro-geophysical prospecting. In the first edition of Handbook of Hydrogeology, hydro-remote sensing was only mentioned as an interpretation of aerial pictures in a hydrogeological way, but had not yet formed an independent system and discipline. In the second edition, hydro-remote sensing is an important and independent chapter as one of the hydrogeological techniques. In it, various survey techniques of hydro-remote sensing and types and features of remote sensing data are classified. General systems of interpretation marks of remote sensing images are established, including marks of landform and Quaternary sediment, bedrock, structure types, water yield property, environmental elements of hydrogeology, aquifer group and so on. Systematic workflow is constructed, esp. in remote sensing images mapping and interpreting techniques. GPS and GIS are integrated into remote sensing. Remote sensing exploring instruments and interpreting softwares are also introduced and classified. Although hydro-geophysical prospecting, in the first edition of Handbook of Hydrogeology, was one independent chapter, there were only 10 exploring techniques. Equipments and instruments were simple and lagged in comparison to those in the second edition. The precision and

  15. Kinetics and mechanism of bacterial inactivation by ultrasound waves and sonoprotective effect of milk components.

    PubMed

    Gera, N; Doores, S

    2011-03-01

    Inactivation of Escherichia coli and Listeria monocytogenes were investigated in buffer and milk upon treatment with ultrasound waves (USW). In addition, sonoprotective effect of milk components and ultrasound-induced changes in bacterial cells were investigated using scanning electron microscopy (SEM). Bacterial cells were added to phosphate buffer, whole milk, skim milk, or simulated milk ultrafiltrate (SMUF). To determine the sonoprotective effect of milk components, lactose (5%), casein (3%), or β lactoglobulin (0.3%) was added to SMUF. Samples were sonicated with 24 kHz pulse USW while maintaining the system temperature between 30 to 35 °C. Aliquots were drawn at set times during sonication and bacteria were enumerated by surface plating appropriate dilutions on selective and nonselective media plates. Escherichia coli exhibited significantly higher D values in whole (2.43 min) and skim milk (2.41 min) than phosphate buffer (2.19 min). Listeria monocytogenes also showed higher D values in whole (9.31 min) and skim milk (8.61 min) compared to phosphate buffer (7.63 min). Data suggest that milk exerts a sonoprotective effect on these bacteria. Escherichia coli exhibited a log-linear inactivation kinetics followed by tailing whereas L. monocytogenes showed 1st-order kinetics throughout. Among the milk components tested, presence of lactose in SMUF resulted in significantly higher D values than SMUF for both organisms suggesting that lactose was exerting a protective effect on bacteria. SEM images showed that USW caused mechanical damage to the cell wall and cell membrane of bacteria leading to their inactivation. PMID:21535773

  16. Hysteretic behavior of Fe(phen){sub 2}(NCS){sub 2} spin-transition microparticles vs. the environment: A huge reversible component resolved by first order reversal curves

    SciTech Connect

    Tanasa, Radu; Stancu, Alexandru; Enachescu, Cristian; Laisney, Jérôme; Boillot, Marie-Laure

    2014-01-20

    We discuss the influence of the embedding matrix on the thermal hysteretic behavior of spin transition microparticles of Fe(phen){sub 2}(NCS){sub 2} by using a series of experimental first order reversal curves (FORCs). The shape of FORCs supports the hypothesis considering additional interactions between the spin-transition microparticles and the embedding matrix, which compares to a negative pressure on the particles. A mean-field approach based on negative variable external pressures, together with a cut off/switch on of particles-matrix interactions accounts for the experimental features.

  17. EDITORIAL: Special section: Selected papers from OMS'05, the 1st Topical Meeting of the European Optical Society on Optical Microsystems (OMS)

    NASA Astrophysics Data System (ADS)

    Rendina, Ivo; Fazio, Eugenio; Ferraro, Pietro

    2006-07-01

    OMS'05 is the first international conference wholly dedicated to optical microsystems. It was organized by the European Optical Society (EOS) in the frame of its international topical meeting activity and was held in Italy, September 2005, amidst the wonderful scenery of the Island of Capri. A possible definition of an optical microsystem is a complex system, able to perform one or more sensing and actuation functions, where optical devices are integrated in a smart way with electronic, mechanical and sensing components by taking advantage of the progress in micro- and nano-technologies. The increasing interest in this field arises from the expected applications that would significantly improve the quality of life. The list of possibilities offered by the optical microsystem enabling technologies is very long and seems to increase day by day. We are not only thinking about the next generation of optical telecommunication networks and computers, but also about low-cost, compact microsystems for environmental monitoring, in order to improve safety in the avionic and automotive fields, medical diagnostics and proteomic/genomic studies, or just finding general applications in several industrial fields. The goal of the conference was to involve scientists and young researchers from the main public and private laboratories, giving them the opportunity to present new scientific results and compare their know-how in the exciting and emerging field of optical microsystems. We believe that we succeeded in this. More than 200 scientists from all over the world attended the conference. We had more than 100 oral presentations and approximately 20 from the keynote lectures and invited speeches. It was an opportunity to define the most recent progress carried out in the field and to outline the possible road-map leading to the expected results in the industrial and social fields. We strongly believe that research and technology are closely interconnected at present and cannot

  18. X-ray diffraction study on ordered, disordered and reconstituted intercellular lipid lamellar structure in stratum corneum.

    PubMed

    Hatta, I; Ohta, N; Ban, S; Tanaka, H; Nakata, S

    2001-02-15

    From small angle X-ray diffraction for the stratum corneum of hairless mouse, it was obtained that in the normal stratum corneum, the 1st, 2nd and 3rd order diffraction peaks for the intercellular lipid lamellar structure appear at 13.8, 6.87 and 4.59 nm, respectively and also a broad hump for the 4th order reflection appears as observed by the previous researchers. In the damaged stratum corneum prepared by the treatment of sodium dodecyl sulfate, these small-angle diffraction peaks disappear and only the broad maxima remain around the 1st, 2nd and 3rd order diffraction peaks. These facts indicate that in the normal stratum the lamellar structure is ordered and in the damaged stratum corneum the lamellar structure is disordered. Furthermore, in the reconstituted lamellar structure obtained by immersing into the dilute suspension of the mixture of ceramide 3, cholesterol and stearic acid, the 1st, 2nd and 3rd order diffraction peaks reappear at 13.3, 6.67 and 4.44 nm, respectively. This fact indicates that the reorganization of the ordered lamellar structure takes place by adding the mixture to the damaged stratum corneum. PMID:11254216

  19. School-to-Work Opportunities Act of 1993. Report together with Supplemental Views [To Accompany H.R. 2884.] House of Representatives, 103D Congress, 1st Session.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. House.

    This document contains the text of the legislation called the "School-to-Work Opportunities Act of 1993," the amendment proposed for the pending legislation, and supplemental views, including cost estimate. Sections of the proposed legislation include the following: table of contents, basic program components, implementation grants to states,…

  20. [The flagship of the national naval medical science (on the 80th anniversary of establishment of the 1st Central Research Institute of the Defense Ministry of Russian Federation)].

    PubMed

    Chumakov, Vl V; Arkhipov, A V; Borodavko, V K; Vasil'kov, A M; Groshilin, S M; Ivanov, A O; Smurov, A V

    2013-02-01

    The article is devoted to the 80th anniversary of the formation of the naval medical science subunit, which is the part of the 1st Central Research Institute of the Defense Ministry of Russian Federation. In the 30th years of XX century, a group of naval doctors formulated the main directions of preventive naval medicine. For eight decades, several generations of medical scientists have developed and ensured implementation of regulatory requirements for habitability and ergonomics of Navy ships. At the present stage, this work focuses on promising directions of the development of the domestic military shipbuilding and the use of advanced and innovative biomedical technologies. PMID:23808207

  1. The Hospital Microbiome Project: Meeting Report for the 1st Hospital Microbiome Project Workshop on sampling design and building science measurements, Chicago, USA, June 7th-8th 2012

    PubMed Central

    Smith, Daniel; Alverdy, John; An, Gary; Coleman, Maureen; Garcia-Houchins, Sylvia; Green, Jessica; Keegan, Kevin; Kelley, Scott T.; Kirkup, Benjamin C.; Kociolek, Larry; Levin, Hal; Landon, Emily; Olsiewski, Paula; Knight, Rob; Siegel, Jeffrey; Weber, Stephen; Gilbert, Jack

    2013-01-01

    This report details the outcome of the 1st Hospital Microbiome Project workshop held on June 7th-8th, 2012 at the University of Chicago, USA. The workshop was arranged to determine the most appropriate sampling strategy and approach to building science measurement to characterize the development of a microbial community within a new hospital pavilion being built at the University of Chicago Medical Center. The workshop made several recommendations and led to the development of a full proposal to the Alfred P. Sloan Foundation as well as to the creation of the Hospital Microbiome Consortium. PMID:23961316

  2. Attitude Control Propulsion Components, Volume 2

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Attitude control propulsion components are described, including hydrazine thrusters, hydrazine thruster and cold gas jet valves, and pressure and temperature transducers. Component-ordered data are presented in tabular form; the manufacturer and specific space program are included.

  3. Orthogonal higher order structure and confirmatory factor analysis of the French Wechsler Adult Intelligence Scale (WAIS-III).

    PubMed

    Golay, Philippe; Lecerf, Thierry

    2011-03-01

    According to the most widely accepted Cattell-Horn-Carroll (CHC) model of intelligence measurement, each subtest score of the Wechsler Intelligence Scale for Adults (3rd ed.; WAIS-III) should reflect both 1st- and 2nd-order factors (i.e., 4 or 5 broad abilities and 1 general factor). To disentangle the contribution of each factor, we applied a Schmid-Leiman orthogonalization transformation (SLT) to the standardization data published in the French technical manual for the WAIS-III. Results showed that the general factor accounted for 63% of the common variance and that the specific contributions of the 1st-order factors were weak (4.7%-15.9%). We also addressed this issue by using confirmatory factor analysis. Results indicated that the bifactor model (with 1st-order group and general factors) better fit the data than did the traditional higher order structure. Models based on the CHC framework were also tested. Results indicated that a higher order CHC model showed a better fit than did the classical 4-factor model; however, the WAIS bifactor structure was the most adequate. We recommend that users do not discount the Full Scale IQ when interpreting the index scores of the WAIS-III because the general factor accounts for the bulk of the common variance in the French WAIS-III. The 4 index scores cannot be considered to reflect only broad ability because they include a strong contribution of the general factor. PMID:21171782

  4. Impedance of accelerator components

    SciTech Connect

    Corlett, J.N.

    1996-05-01

    As demands for high luminosity and low emittance particle beams increase, an understanding of the electromagnetic interaction of these beams with their vacuum chamber environment becomes more important in order to maintain the quality of the beam. This interaction is described in terms of the wake field in time domain, and the beam impedance in frequency domain. These concepts are introduced, and related quantities such as the loss factor are presented. The broadband Q = 1 resonator impedance model is discussed. Perturbation and coaxial wire methods of measurement of real components are reviewed.

  5. 1st, 2nd and 3rd Generation Implementations of an eLearning Design: Re-Use from Postgraduate Law to Block/Online Engineering Course

    ERIC Educational Resources Information Center

    Lambert, Sarah; Brewer, Chris

    2007-01-01

    In order to meet the demands of postgraduate students who were time poor and unable to regularly attend face-to-face classes, one lecturer in the Faculty Law at the University of Wollongong (UOW) sought the assistance of a Learning Designer to redesign the Postgraduate Practical Legal Training (PLT) program into a flexible blended learning format,…

  6. International Conference on Hypersonic Flight in the 21st Century, 1st, University of North Dakota, Grand Forks, Sept. 20-23, 1988, Proceedings

    SciTech Connect

    Higbea, M.E.; Vedda, J.A.

    1988-01-01

    The present conference on the development status of configurational concepts and component technologies for hypersonic-cruise and transatmospheric vehicles discusses topics relating to the U.S. National Aerospace Plane program, ESA-planned aerospace vehicles, Japanese spaceplane concepts, the integration of hypersonic aircraft into existing infrastructures, hypersonic airframe designs, hypersonic avionics and cockpit AI systems, hypersonic-regime CFD techniques, the economics of hypersonic vehicles, and possible legal implications of hypersonic flight. Also discussed are Soviet spaceplane concepts, propulsion systems involving laser power sources and hypervelocity launch technologies, and the management of support systems operations for hypersonic vehicles.

  7. Artificial polarization components

    NASA Astrophysics Data System (ADS)

    Cescato, L.; Gluch, Ekkehard; Stork, Wilhelm; Streibl, Norbert

    1990-07-01

    High frequency surface relief structures are optically anisotropic and show interesting polarisation properties 1 . These properties can be used to produce polarizations components such as wave plates polarizers. polarizing beamsplitters etc. Our experimental results show that even gratings with relatively low spatial frequency ( periods A ) exhibit a strong phase retardation and can be used as quarter-wave plates. k INTRODUC11ON The artificial birefringence exhibited by ultrahigh frequency gratings of dielectric materials can be used to produce various polarization components2 . Such components have applications in integrated optics as well as in free space optics. In order to produce the high spatial frequencies complex processes such as electron-beam lithography and reactive ion etching are needed. We show in this paper that sinusoidal holographic gratings in photoresist exhibit also a strong phase ret even at relatively long periods. L EXPERIMENTAL MEASUREMENTS To obtain the phase retardation of a lower frequency ( period A ) grating a simple setup as used by Enger and 2 can be applied. In our case however there are three measurements necessary to obtain the phase retardation because transmission of the two perpendicularly polarized beams is different from each other. I GRATING PRODUCTION grating 2 3 4 5 6 7 8 9 period (pmj 0. 74 0. 74 0. 61 0. 54 0. 46 0. 32 0. 54 0. 54 0. 54 ne (sec) 60

  8. Oligorotaxane Radicals under Orders.

    PubMed

    Wang, Yuping; Frasconi, Marco; Liu, Wei-Guang; Sun, Junling; Wu, Yilei; Nassar, Majed S; Botros, Youssry Y; Goddard, William A; Wasielewski, Michael R; Stoddart, J Fraser

    2016-02-24

    A strategy for creating foldameric oligorotaxanes composed of only positively charged components is reported. Threadlike components-namely oligoviologens-in which different numbers of 4,4'-bipyridinium (BIPY(2+)) subunits are linked by p-xylylene bridges, are shown to be capable of being threaded by cyclobis(paraquat-p-phenylene) (CBPQT(4+)) rings following the introduction of radical-pairing interactions under reducing conditions. UV/vis/NIR spectroscopic and electrochemical investigations suggest that the reduced oligopseudorotaxanes fold into highly ordered secondary structures as a result of the formation of BIPY(•+) radical cation pairs. Furthermore, by installing bulky stoppers at each end of the oligopseudorotaxanes by means of Cu-free alkyne-azide cycloadditions, their analogous oligorotaxanes, which retain the same stoichiometries as their progenitors, can be prepared. Solution-state studies of the oligorotaxanes indicate that their mechanically interlocked structures lead to the enforced interactions between the dumbbell and ring components, allowing them to fold (contract) in their reduced states and unfold (expand) in their fully oxidized states as a result of Coulombic repulsions. This electrochemically controlled reversible folding and unfolding process, during which the oligorotaxanes experience length contractions and expansions, is reminiscent of the mechanisms of actuation associated with muscle fibers. PMID:27163033

  9. FY-2015 FES (Fusion and Energy Sciences) Joint Research Target: Final Report for the Period October 1st, 2014, through September 30th, 2015

    SciTech Connect

    Podesta, M.; Holcomb, C.; Wallace, G.; Gerhardt, S. P.; Scott, S. D.; Solomon, W.

    2015-09-30

    Annual JRT-15 Target: Conduct experiments and analysis to quantify the impact of broadened current and pressure profiles on tokamak plasma confinement and stability. Broadened pressure profiles generally improve global stability but can also affect transport and confinement, while broadened current profiles can have both beneficial and adverse impacts on confinement and stability. This research will examine a variety of heating and current drive techniques in order to validate theoretical models of both the actuator performance and the transport and global stability response to varied heating and current drive deposition.

  10. Applications of ICP magnetic sector multicollector mass spectrometry to basic energy research. Final report for period December 1st, 1993 - May 31st, 2000

    SciTech Connect

    Halliday, A.N.

    2002-05-01

    The primary aims of this research were threefold: to develop and utilize the new technique of multiple collector inductively coupled plasma mass spectrometry and apply it to problems in the earth, ocean, and environmental sciences; to develop new chronometers and improve existing chronometers to allow the accurate determination of the ages of geological features and processes; and to study natural fluid-mediated mass transfer processes and source of components in the crust and the oceans. This technique has now become the preferred method for the determination of the isotopic compositions of a variety of elements in the periodic table. The prototype instrument was used to explore a vast array of isotopic systems and demonstrate applicability to problems as different as the origin of the solar system and smelting methods in the Bronze Age. Highlights of the program are briefly summarized under the following topics: tungsten isotopes and the early solar system; trace siderophile and chalcophile element geochemistry; hafnium isotopes and the early development of the continents; evolution of lead isotopic compositions of the oceans; the isotopic composition and residence time of Hf in seawater; the isotopic compositions of Sr, Hf, Pb, and Nd in dust; U-Th disequilibrium dating of carbonates and soils; in situ U-Th disequilibrium dating of opal.

  11. Post waterflood CO2 miscible flood in light oil fluvial - dominated deltaic reservoirs. Technical progress report, October 1, 1994--December 30, 1994. 1st Quarter, fiscal year 1995

    SciTech Connect

    1994-01-15

    Production is averaging about 450 BOPD for the quarter. The fluctuation was primarily due to a temporary shutdown of CO{sub 2} delivery and maturing of the first WAG cycle. CO{sub 2} and water injection were reversed again in order to optimize changing yields and water cuts in the producing wells. Measured BHP was close to the anticipated value. A limited CO{sub 2} volume of 120 MMCF was injected to stimulate well Kuhn No. 6 to test the Huff-Puff process, since the well did not respond to CO{sub 2} injection from the main reservoir. The well will be placed on February 1, 1995. Total CO{sub 2} injection averaged this quarter about 8.8 MMCFD, including 3.6 MMCFD purchased CO{sub 2} from Cardox. The stratigraphy of the sand deposits is also discussed.

  12. High order sideband generation in terahertz quantum cascade lasers

    NASA Astrophysics Data System (ADS)

    Cavalié, P.; Freeman, J.; Maussang, K.; Strupiechonski, E.; Xu, G.; Colombelli, R.; Li, L.; Davies, A. G.; Linfield, E. H.; Tignon, J.; Dhillon, S. S.

    2013-06-01

    We demonstrate the generation of high order terahertz (THz) frequency sidebands (up to 3rd order) on a near infrared (NIR) optical carrier within a THz quantum cascade laser (QCL). The NIR carrier is resonant with the interband transition of the quantum wells composing the QCL, allowing the nonlinearity to be enhanced and leading to frequency mixing. A phonon depopulation based QCL with a double metal cavity was used to enhance the intracavity power density and to demonstrate the higher order sidebands. The 1st order sideband intensity shows a linear dependence with THz power corresponding to a single THz photon, while the second order sideband has a quadratic dependence implying a two THz photon interaction and hence a third order susceptibility. These measurements are compared to the photoluminescence and the QCL bandstructure to identify the states involved, with the lowest conduction band states contributing the most to the sideband intensity. We also show that the interaction for the second order sideband corresponds to an enhanced direct third order susceptibility χ(3) of ˜7 × 10-16(m/V)2, two orders of magnitude greater than the bulk value.

  13. Developing, enabling and facilitating practice-based research in primary dental care. Report of a one-day seminar, held at the Royal College of Surgeons of England on Friday, 1st February 2008.

    PubMed

    Eaton, Kenneth A; Narain, Amrita; Batchelor, Paul

    2008-07-01

    As part of the Faculty of General Dental Practice (UK)'s strategy to develop a research base for primary dental care, a one-day seminar was held at The Royal College of Surgeons of England on Friday, 1st February 2008. The aims for the day were to bring together the Divisional Research Contacts (DRCs), Faculty members with an interest in research, and regional and national leaders in primary care research; to update DRCs and Faculty members on developments and opportunities in primary care research; and to raise awareness of the Faculty's work among the leaders of primary care research. Of the 33 who attended the seminar, 12 were DRCs. PMID:18755058

  14. MRS International Meeting on Advanced Materials, 1st, Tokyo, Japan, May 31-June 3, 1988, Proceedings. Volume 5 - Structural ceramics/Fracture mechanics

    SciTech Connect

    Hamano, Yoshiteru; Kamigaito, Osami; Kishi, Teruo; Sakai, Mototsugu.

    1989-01-01

    Papers on structural ceramics and fracture mechanics are presented, covering topics such as the effects of additives on sintering silicon oxynitride, toughening Y-tetragonal zirconia polycrystal, stress-induced transformation in Mg-PSZ, and the properties of fine-grained zirconia-toughened alumina, nitride ceramics, sintered silicon nitride, and SiC. Other topics include processing Si{sub 3}N{sub 4}-SiC composites, whisker reinforced glass-ceramics, Al{sub 2}O{sub 3} ceramics, black and machinable glass ceramics in the CaO-Y{sub 2}O{sub 3}-Al{sub 2}O{sub 3}-SiO{sub 2}-TR(x)O(y) system, grinding technologies, advanced materials for heat engine components, ceramic composites for high-temperature gas turbines, toughening brittle matrix composites, crack resistance measurements, dynamic fracture toughenss in ceramics and on brittle materials, softening in MgAl2O4 single crystal, computer simulation of fracture in small crystals, stress triaxiality effects on fracture morphology in Al-Zn-Mg-Cu alloys, crack identification by acoustic emission and boundary element method, the micromechanics of dilatancy in brittle materials, nonlinear stress-strain behavior predictions, erosive wear of Si{sub 3}N{sub 4}-SiC composites, whisker/glass composites fabricated from hydrothermally oxidized Si{sub 3}N{sub 4} whisker, subcritical crack extension in ceramics, and crack propagation behavior of sintered Si{sub 3}N{sub 4} under static and cyclic load.

  15. All Roads Lead to Rome: Exploring Human Migration to the Eternal City through Biochemistry of Skeletons from Two Imperial-Era Cemeteries (1st-3rd c AD).

    PubMed

    Killgrove, Kristina; Montgomery, Janet

    2016-01-01

    Migration within the Roman Empire occurred at multiple scales and was engaged in both voluntarily and involuntarily. Because of the lengthy tradition of classical studies, bioarchaeological analyses must be fully contextualized within the bounds of history, material culture, and epigraphy. In order to assess migration to Rome within an updated contextual framework, strontium isotope analysis was performed on 105 individuals from two cemeteries associated with Imperial Rome-Casal Bertone and Castellaccio Europarco-and oxygen and carbon isotope analyses were performed on a subset of 55 individuals. Statistical analysis and comparisons with expected local ranges found several outliers who likely immigrated to Rome from elsewhere. Demographics of the immigrants show men and children migrated, and a comparison of carbon isotopes from teeth and bone samples suggests the immigrants may have significantly changed their diet. These data represent the first physical evidence of individual migrants to Imperial Rome. This case study demonstrates the importance of employing bioarchaeology to generate a deeper understanding of a complex ancient urban center. PMID:26863610

  16. All Roads Lead to Rome: Exploring Human Migration to the Eternal City through Biochemistry of Skeletons from Two Imperial-Era Cemeteries (1st-3rd c AD)

    PubMed Central

    Killgrove, Kristina; Montgomery, Janet

    2016-01-01

    Migration within the Roman Empire occurred at multiple scales and was engaged in both voluntarily and involuntarily. Because of the lengthy tradition of classical studies, bioarchaeological analyses must be fully contextualized within the bounds of history, material culture, and epigraphy. In order to assess migration to Rome within an updated contextual framework, strontium isotope analysis was performed on 105 individuals from two cemeteries associated with Imperial Rome—Casal Bertone and Castellaccio Europarco—and oxygen and carbon isotope analyses were performed on a subset of 55 individuals. Statistical analysis and comparisons with expected local ranges found several outliers who likely immigrated to Rome from elsewhere. Demographics of the immigrants show men and children migrated, and a comparison of carbon isotopes from teeth and bone samples suggests the immigrants may have significantly changed their diet. These data represent the first physical evidence of individual migrants to Imperial Rome. This case study demonstrates the importance of employing bioarchaeology to generate a deeper understanding of a complex ancient urban center. PMID:26863610

  17. Variability of Polychaete Secondary Production in Intertidal Creek Networks along a Stream-Order Gradient

    PubMed Central

    Chu, Tianjiang; Sheng, Qiang; Wang, Sikai; Wu, Jihua

    2014-01-01

    Dendritic tidal creek networks are important habitats for sustaining biodiversity and ecosystem functioning in salt marsh wetlands. To evaluate the importance of creek heterogeneity in supporting benthic secondary production, we assess the spatial distribution and secondary production of a representative polychaete species (Dentinephtys glabra) in creek networks along a stream-order gradient in a Yangtze River estuarine marsh. Density, biomass, and secondary production of polychaetes were found to be highest in intermediate order creeks. In high order (3rd and 4th) creeks, the density and biomass of D. glabra were higher in creek edge sites than in creek bottom sites, whereas the reverse was true for low order (1st and 2nd) creeks. Secondary production was highest in 2nd order creeks (559.7 mg AFDM m−2 year−1) and was ca. 2 folds higher than in 1st and 4th order creeks. Top fitting AIC models indicated that the secondary production of D. glabra was mainly associated with geomorphological characters including cross-sectional area and bank slope. This suggests that hydrodynamic forces are essential factors influencing secondary production of macrobenthos in salt marshes. This study emphasizes the importance of microhabitat variability when evaluating secondary production and ecosystem functions. PMID:24817092

  18. Lifing of Engine Components

    NASA Technical Reports Server (NTRS)

    2005-01-01

    The successful development of advanced aerospace engines depends greatly on the capabilities of high performance materials and structures. Advanced materials, such as nickel based single crystal alloys, metal foam, advanced copper alloys, and ceramics matrix composites, have been engineered to provide higher engine temperature and stress capabilities. Thermal barrier coatings have been developed to improve component durability and fuel efficiency, by reducing the substrate hot wall metal temperature and protecting against oxidation and blanching. However, these coatings are prone to oxidation and delamination failures. In order to implement the use of these materials in advanced engines, it is necessary to understand and model the evolution of damage of the metal substrate as well as the coating under actual engine conditions. The models and the understanding of material behavior are utilized in the development of a life prediction methodology for hot section components. The research activities were focused on determining the stress and strain fields in an engine environment under combined thermo-mechanical loads to develop life prediction methodologies consistent with the observed damage formation of the coating and the substrates.

  19. Activity-guided isolation and identification of anti-staphylococcal components from Senecio tenuifolius Burm. F. leaf extracts

    PubMed Central

    Manubolu, Manjunath; Goodla, Lavanya; Ravilla, Sivajyothi; Obulum, Vijayasarathi Reddy

    2013-01-01

    Objective To investigate activity-guided isolation and identification of anti-Staphylococcus aures components from Senecio tenuifolius Burm. F. (S. tenuifolius). Methods Hexane, chloroform, ethyl acetate, methanol and aqueous extracts of S. tenuifolius were prepared by soxilation for antimicrobial activity against one registered Staphylococcus aureus (S. aureus) (ATCC No: 25923) and two clinical isolates, methicillin resistant and methicillin sensitive S. aureus. NCCL standard methods were followed for antibacterial activity. GC-MS was performed to identify the chemical composition of bio active fraction. Results Among all solvent extracts, methanol extract significantly reduced the growth of S. aureus (ATCC No: 25923), methicillin resistant and methicillin sensitive S. aureus with the best zone of inhibition at 16.23, 14.06 and 15.23 mm and minimum inhibition concentration (MIC) values at 426.16, 683.22 and 512.12 µg/mL, respectively. In order to detect the active component in methanol extract, it was further purified by column chromatography, which yielded four fractions (St1, St2, St3, and St4). Among these four fractions, St3 was effective against the tested strains of S. aures, with the best zone of inhibition at 15.09, 13.25 and 14.12 mm and with best MIC values at 88.16, 128.11 and 116.12 µg/mL, respectively. Effective fraction partially purified from S. tenuifolius (St3) yielded MIC's that were at least 20 fold less when compared to crude extract. GC-MS analysis of St3 revealed the presence of 3-[methyl-6,7-dihydro benzofuran-4 (5H)-one], 1,2-benzenedicarboxylic acid, hydroquinone, methyl ester and 3 unknown compounds. Conclusions The study provides scientific evidence for traditional and folklore medicinal use of S. tenuifolius in skin infections treatment. PMID:23620836

  20. Computerized Physician Order Entry

    PubMed Central

    Khanna, Raman; Yen, Tony

    2014-01-01

    Computerized physician order entry (CPOE) has been promoted as an important component of patient safety, quality improvement, and modernization of medical practice. In practice, however, CPOE affects health care delivery in complex ways, with benefits as well as risks. Every implementation of CPOE is associated with both generally recognized and unique local factors that can facilitate or confound its rollout, and neurohospitalists will often be at the forefront of such rollouts. In this article, we review the literature on CPOE, beginning with definitions and proceeding to comparisons to the standard of care. We then proceed to discuss clinical decision support systems, negative aspects of CPOE, and cultural context of CPOE implementation. Before concluding, we follow the experiences of a Chief Medical Information Officer and neurohospitalist who rolled out a CPOE system at his own health care organization and managed the resulting workflow changes and setbacks. PMID:24381708

  1. Oligorotaxane Radicals under Orders

    PubMed Central

    2016-01-01

    A strategy for creating foldameric oligorotaxanes composed of only positively charged components is reported. Threadlike components—namely oligoviologens—in which different numbers of 4,4′-bipyridinium (BIPY2+) subunits are linked by p-xylylene bridges, are shown to be capable of being threaded by cyclobis(paraquat-p-phenylene) (CBPQT4+) rings following the introduction of radical-pairing interactions under reducing conditions. UV/vis/NIR spectroscopic and electrochemical investigations suggest that the reduced oligopseudorotaxanes fold into highly ordered secondary structures as a result of the formation of BIPY•+ radical cation pairs. Furthermore, by installing bulky stoppers at each end of the oligopseudorotaxanes by means of Cu-free alkyne–azide cycloadditions, their analogous oligorotaxanes, which retain the same stoichiometries as their progenitors, can be prepared. Solution-state studies of the oligorotaxanes indicate that their mechanically interlocked structures lead to the enforced interactions between the dumbbell and ring components, allowing them to fold (contract) in their reduced states and unfold (expand) in their fully oxidized states as a result of Coulombic repulsions. This electrochemically controlled reversible folding and unfolding process, during which the oligorotaxanes experience length contractions and expansions, is reminiscent of the mechanisms of actuation associated with muscle fibers. PMID:27163033

  2. First- and second-order PMD mitigation using 3R regeneration

    NASA Astrophysics Data System (ADS)

    Pan, Shilong; Huo, Li; Yang, Yanfu; Lou, Caiyun; Gao, Yizhi

    2005-11-01

    We experimentally studied the PMD mitigation schemes using two different optical 3R regenerators. One is based on synchronous modulation and the other using an optical decision gate based on an electroabsorption modulator. The experimental results show that both schemes are useful to mitigate the signal quality degeneration induced by both first and second order PMD. System performance without and with 3R regeneration was separately studied by eye analysis and BER measurements. The signal quality was significantly improved by 3R regeneration under serious 1st-order PMD (up to 40% of the bit interval) combined with 2nd-order PMD (up to ~520ps2). We compared the performance between the two different 3R regenerators. The results show that 3R regenerator using an optical decision gate has a superior performance in synchronously mitigating 1st-order and 2nd-order PMD. Moreover, 3R based on EAM performs wavelength conversion simultaneously, which can be used to avoid wavelength blocking at nodes of the optical networks. Further studies indicate that 3R regenerators have the potential to combat with the effects of PMD combined with PDL and PHB. The limitation of the two schemes is also discussed.

  3. Component Fragility Research Program: Phase 1 component prioritization

    SciTech Connect

    Holman, G.S.; Chou, C.K.

    1987-06-01

    Current probabilistic risk assessment (PRA) methods for nuclear power plants utilize seismic ''fragilities'' - probabilities of failure conditioned on the severity of seismic input motion - that are based largely on limited test data and on engineering judgment. Under the NRC Component Fragility Research Program (CFRP), the Lawrence Livermore National Laboratory (LLNL) has developed and demonstrated procedures for using test data to derive probabilistic fragility descriptions for mechanical and electrical components. As part of its CFRP activities, LLNL systematically identified and categorized components influencing plant safety in order to identify ''candidate'' components for future NRC testing. Plant systems relevant to safety were first identified; within each system components were then ranked according to their importance to overall system function and their anticipated seismic capacity. Highest priority for future testing was assigned to those ''very important'' components having ''low'' seismic capacity. This report describes the LLNL prioritization effort, which also included application of ''high-level'' qualification data as an alternate means of developing probabilistic fragility descriptions for PRA applications.

  4. Variable Order and Distributed Order Fractional Operators

    NASA Technical Reports Server (NTRS)

    Lorenzo, Carl F.; Hartley, Tom T.

    2002-01-01

    Many physical processes appear to exhibit fractional order behavior that may vary with time or space. The continuum of order in the fractional calculus allows the order of the fractional operator to be considered as a variable. This paper develops the concept of variable and distributed order fractional operators. Definitions based on the Riemann-Liouville definitions are introduced and behavior of the operators is studied. Several time domain definitions that assign different arguments to the order q in the Riemann-Liouville definition are introduced. For each of these definitions various characteristics are determined. These include: time invariance of the operator, operator initialization, physical realization, linearity, operational transforms. and memory characteristics of the defining kernels. A measure (m2) for memory retentiveness of the order history is introduced. A generalized linear argument for the order q allows the concept of "tailored" variable order fractional operators whose a, memory may be chosen for a particular application. Memory retentiveness (m2) and order dynamic behavior are investigated and applications are shown. The concept of distributed order operators where the order of the time based operator depends on an additional independent (spatial) variable is also forwarded. Several definitions and their Laplace transforms are developed, analysis methods with these operators are demonstrated, and examples shown. Finally operators of multivariable and distributed order are defined in their various applications are outlined.

  5. The 1st Grade Plant Museum.

    ERIC Educational Resources Information Center

    Wallach, Christine; Callahan, Susan

    1994-01-01

    A Saint Louis school experimenting with applying multiple intelligences theory to curricula and instruction defines "genuine understanding" as using information in novel ways. By surveying area museums and designing user-friendly botanical exhibits for a community-based project, first graders developed a better understanding of their own varied…

  6. GALEX 1st Light Near Ultraviolet -50

    NASA Technical Reports Server (NTRS)

    2003-01-01

    This image was taken May 21 and 22 by NASA's Galaxy Evolution Explorer. The image was made from data gathered by the two channels of the spacecraft camera during the mission's 'first light' milestone. It shows about 50 celestial objects in the constellation Hercules. The reddish objects represent those detected by the camera's near ultraviolet channel over a 5-minute period, while bluish objects were detected over a 3-minute period by the camera's far ultraviolet channel. Deeper imaging may confirm the apparent existence in this field of galaxy pairs and triplets or individual star formation regions in single galaxies.

    The Galaxy Evolution Explorer's first light images are dedicated to the crew of the Space Shuttle Columbia. The Hercules region was directly above Columbia when it made its last contact with NASA Mission Control on February 1, over the skies of Texas.

    The Galaxy Evolution Explorer launched on April 28 on a mission to map the celestial sky in the ultraviolet and determine the history of star formation in the universe over the last 10 billion years.

  7. GALEX 1st Light Near Ultraviolet

    NASA Technical Reports Server (NTRS)

    2003-01-01

    This image was taken on May 21 and 22 by NASA's Galaxy Evolution Explorer. The image was made from data gathered during the missions 'first light' milestone, and shows celestial objects in the constellation Hercules. The objects shown represent those detected by the camera's near ultraviolet channel over a 5-minute period. The radial streaks at the edge of the image are due to stars reflecting from the near ultraviolet detector window.

    The Galaxy Evolution Explorer's first light images are dedicated to the crew of the Space Shuttle Columbia. The Hercules region was directly above Columbia when it made its last contact with NASA Mission Control on February 1, over the skies of Texas.

    The Galaxy Evolution Explorer launched on April 28 on a mission to map the celestial sky in the ultraviolet and determine the history of star formation in the universe over the last 10 billion years.

  8. GALEX 1st Light Far Ultraviolet

    NASA Technical Reports Server (NTRS)

    2003-01-01

    This image was taken May 21 and 22 by NASA's Galaxy Evolution Explorer. The image was made from data gathered by the far ultraviolet channel of the spacecraft camera during the mission's 'first light' milestone. It shows about 400 celestial objects, appearing in blue, detected over a 3-minute, 20-second period in the constellation Hercules.

    The Galaxy Evolution Explorer's first light images are dedicated to the crew of the Space Shuttle Columbia. The Hercules region was directly above Columbia when it made its last contact with NASA Mission Control on February 1, over the skies of Texas.

    The Galaxy Evolution Explorer launched on April 28 on a mission to map the celestial sky in the ultraviolet and determine the history of star formation in the universe over the last 10 billion years.

  9. Robotic component preparation

    SciTech Connect

    Dokos, J.R.

    1986-04-01

    This report provides information on the preparation of robotic components. Component preparation includes pretinning or solder dipping, preforming, and pretrimming of component leads. Since about 70% of all components are axial-leaded resistor-type components, it was decided to begin with them and then later develop capabilities to handle other types. The first workcell is the first phase of an overall system to pretin, preform, and pretrim all components and to feed them to an automatic insertion system. Before use of the robot, a Unimation PUMA Modal 260, pretinning and preforming was done by first hand with a shield and vented booth.

  10. Software component quality evaluation

    NASA Technical Reports Server (NTRS)

    Clough, A. J.

    1991-01-01

    The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

  11. Reactor component automatic grapple

    SciTech Connect

    Greenaway, P.R.

    1982-12-07

    A grapple for handling nuclear reactor components in a medium such as liquid sodium which, upon proper seating and alignment of the grapple with the component as sensed by a mechanical logic integral to the grapple, automatically seizes the component. The mechanical logic system also precludes seizure in the absence of proper seating and alignment.

  12. Reactor component automatic grapple

    DOEpatents

    Greenaway, Paul R.

    1982-01-01

    A grapple for handling nuclear reactor components in a medium such as liquid sodium which, upon proper seating and alignment of the grapple with the component as sensed by a mechanical logic integral to the grapple, automatically seizes the component. The mechanical logic system also precludes seizure in the absence of proper seating and alignment.

  13. Solid tags for identifying failed reactor components

    DOEpatents

    Bunch, Wilbur L.; Schenter, Robert E.

    1987-01-01

    A solid tag material which generates stable detectable, identifiable, and measurable isotopic gases on exposure to a neutron flux to be placed in a nuclear reactor component, particularly a fuel element, in order to identify the reactor component in event of its failure. Several tag materials consisting of salts which generate a multiplicity of gaseous isotopes in predetermined ratios are used to identify different reactor components.

  14. Perceptual quantization of chromatic components

    NASA Astrophysics Data System (ADS)

    Saadane, Abdelhakim; Bedat, Laurent; Barba, Dominique

    1998-07-01

    In order to achieve a color image coding based on the human visual system features, we have been interested by the design of a perceptually based quantizer. The cardinal directions Ach, Cr1 and Cr2, designed by Krauskopf from habituation experiments and validated in our lab from spatial masking experiments, have been used to characterize color images. The achromatic component, already considered in previous study, will not be considered here. The same methodology has been applied to the two chromatic components to specify the decision thresholds and the reconstruction levels which ensure that the degradations induced will be lower than their visibility thresholds. Two observers have been used for each of the two components. From the values obtained for Cr1 component one should notice that the decision thresholds and reconstruction levels follow a linear law even at higher levels. However, for Cr2 component the values seem following a monotonous increasing function. To determine if these behaviors are frequency dependent, further experiments have been conducted with stimulus frequencies varying from 1cy/deg to 4cy/deg. The measured values show no significant variations. Finally, instead of sinusoidal stimuli, filtered textures have been used to take into account the spatio-frequential combination. The same laws (linear for Cr1 and monotonous increasing for Cr2) have been observed even if a variation in the quantization intervals is reported.

  15. Order-parameter scaling in fluctuation-dominated phase ordering.

    PubMed

    Kapri, Rajeev; Bandyopadhyay, Malay; Barma, Mustansir

    2016-01-01

    In systems exhibiting fluctuation-dominated phase ordering, a single order parameter does not suffice to characterize the order, and it is necessary to monitor a larger set. For hard-core sliding particles on a fluctuating surface and the related coarse-grained depth (CD) models, this set comprises the long-wavelength Fourier components of the density profile, which capture the breakup and remerging of particle-rich regions. We study both static and dynamic scaling laws obeyed by the Fourier modes Q_{mL} and find that the mean value obeys the static scaling law 〈Q_{mL}〉∼L^{-ϕ}f(m/L) with ϕ≃2/3 and ϕ≃3/5 for Edwards-Wilkinson (EW) and Kardar-Parisi-Zhang (KPZ) surface evolution, respectively, and ϕ≃3/4 for the CD model. The full probability distribution P(Q_{mL}) exhibits scaling as well. Further, time-dependent correlation functions such as the steady-state autocorrelation and cross-correlations of order-parameter components are scaling functions of t/L^{z}, where L is the system size and z is the dynamic exponent, with z=2 for EW and z=3/2 for KPZ surface evolution. In addition we find that the CD model shows temporal intermittency, manifested in the dynamical structure functions of the density and the weak divergence of the flatness as the scaled time approaches 0. PMID:26871034

  16. Local pressure components and interfacial tensions of a liquid film in the vicinity of a solid surface with a nanometer-scale slit pore obtained by the perturbative method

    SciTech Connect

    Fujiwara, K.; Shibahara, M.

    2015-03-07

    A classical molecular dynamics simulation was conducted for a liquid-solid interfacial system with a nanometer-scale slit pore in order to reveal local thermodynamic states: local pressure components and interfacial tensions of a liquid film in the vicinity of the slit. The simulation also examined the transition mechanism between the two states of the liquid film: (a) liquid film on the slit and (b) liquid film in the slit, based on the local thermodynamic quantities from a molecular point of view. An instantaneous expression of the local pressure components and interfacial tensions, which is based on a volume perturbation, was presented to investigate time-dependent phenomena in molecular dynamics simulations. The interactions between the particles were described by the 12-6 Lennard-Jones potential, and effects of the fluid-solid interaction intensity on the local pressure components and interfacial tensions of the fluid in the vicinity of the slit were examined in detail by the presented perturbative method. The results revealed that the local pressure components tangential to the solid surface in the vicinity of the 1st fluid layer from the solid surface are different in a two dimensional plane, and the difference became pronounced in the vicinity of the corner of the slit, for cases where the fluid-solid interaction intensities are relatively strong. The results for the local interfacial tensions of the fluid inside the slit suggested that the local interfacial tensions in the vicinity of the 2nd and 3rd layers of the solid atoms from the entrance of the slit act as a trigger for the transition between the two states under the influence of a varying fluid-solid interaction.

  17. Density functional theory calculations on the active site of biotin synthase: mechanism of S transfer from the Fe(2)S(2) cluster and the role of 1st and 2nd sphere residues.

    PubMed

    Rana, Atanu; Dey, Subal; Agrawal, Amita; Dey, Abhishek

    2015-10-01

    Density functional theory (DFT) calculations are performed on the active site of biotin synthase (BS) to investigate the sulfur transfer from the Fe(2)S(2) cluster to dethiobiotin (DTB). The active site is modeled to include both the 1st and 2nd sphere residues. Molecular orbital theory considerations and calculation on smaller models indicate that only an S atom (not S²⁻) transfer from an oxidized Fe(2)S(2) cluster leads to the formation of biotin from the DTB using two adenosyl radicals generated from S-adenosyl-L-methionine. The calculations on larger protein active site model indicate that a 9-monothiobiotin bound reduced cluster should be an intermediate during the S atom insertion from the Fe(2)S(2) cluster consistent with experimental data. The Arg260 bound to Fe1, being a weaker donor than cysteine bound to Fe(2), determines the geometry and the electronic structure of this intermediate. The formation of this intermediate containing the C9-S bond is estimated to have a ΔG(≠) of 17.1 kcal/mol while its decay by the formation of the 2nd C6-S bond is calculated to have a ΔG(≠) of 29.8 kcal/mol, i.e. the 2nd C-S bond formation is calculated to be the rate determining step in the cycle and it leads to the decay of the Fe(2)S(2) cluster. Significant configuration interaction (CI), present in these transition states, helps lower the barrier of these reactions by ~30-25 kcal/mol relative to a hypothetical outer-sphere reaction. The conserved Phe285 residue near the Fe(2)S(2) active site determines the stereo selectivity at the C6 center of this radical coupling reaction. Reaction mechanism of BS investigated using DFT calculations. Strong CI and the Phe285 residue control the kinetic rate and stereochemistry of the product. PMID:26369537

  18. Results of Primary Total Hip Arthroplasty Using 36 mm Femoral Heads on 1st Generation Highly Cross Linked Polyethylene in Patients 50 Years and Less with Minimum Five Year Follow-up

    PubMed Central

    Choi, Won-Kee; Kim, Hee-soo; Nam, Jun-Ho; Chae, Seung-Bum

    2016-01-01

    Purpose We evaluated the clinical and radiographic midterm results of primary total hip arthroplasty (THA) using a 36 mm diameter femoral head on 1st generation highly cross-linked polyethylene (HXLPE) in patients 50 years and less with minimum five year follow-up. Materials and Methods We retrospectively reviewed 31 patients (41 hips) aged 50 years and less underwent primary THA with a 36 mm diameter femoral head on HXLPE between 2004 and 2010. Clinical follow-ups included specific measurements like modified Harris hip scores (HHS) and Merle d'Aubigne and Postel score. For radiologic evaluations, together with position of acetabular cup at six weeks later of postoperation, we separately calculated the penentrations of femoral head into polyethylene liners during postoperation and one year later check-ups, and during one year later check-ups and final check-ups. Results There were no major complications except for one case of dislocation. Average modified HHS at final follow-up was 88 (81-98), and Merle d'Aubigne and Postel scores were more than 15. Mean acetabular cup inclination and anteversion were 45.81°(36.33°-54.91°) and 13.26°(6.72°-27.71°), respectively. Average femoral head penetration of steady-state wear rate determined using radiographs taken at one-year postoperatively and at latest follow-up was 0.042±0.001 mm/year. Conclusion Based on minimum 5 years clinical results, we think 36 mm metal head coupling with HXLPE as the good alternate articulation surface when planning THA for patients aged 50 years and less. PMID:27536648

  19. Cvode component user guidelines.

    SciTech Connect

    Ray, Jaideep; Allan, Benjamin A.; Smith, Kylene J.

    2003-05-01

    This report describes the wrapping of cvode, a serial library of BDF-based solvers for stiff ODE systems, into a CCA component. It also gives examples of how one loads In the Cvode Component into the CCA framework, (Sandia's dccafe) as well as how the interface to the component (called CvodePort) is used. The report concludes with some timing results whereby we empirically show that componentization results in a maximum 2% performance degradation on a single CPU. The component can be obtained from Jaideep Ray (jairav@ca.sandia.gov, 925-294-3638)

  20. Order Theoretical Semantic Recommendation

    SciTech Connect

    Joslyn, Cliff A.; Hogan, Emilie A.; Paulson, Patrick R.; Peterson, Elena S.; Stephan, Eric G.; Thomas, Dennis G.

    2013-07-23

    Mathematical concepts of order and ordering relations play multiple roles in semantic technologies. Discrete totally ordered data characterize both input streams and top-k rank-ordered recommendations and query output, while temporal attributes establish numerical total orders, either over time points or in the more complex case of startend temporal intervals. But also of note are the fully partially ordered data, including both lattices and non-lattices, which actually dominate the semantic strcuture of ontological systems. Scalar semantic similarities over partially-ordered semantic data are traditionally used to return rank-ordered recommendations, but these require complementation with true metrics available over partially ordered sets. In this paper we report on our work in the foundations of partial order measurement in ontologies, with application to top-k semantic recommendation in workflows.

  1. Generalized Structured Component Analysis

    ERIC Educational Resources Information Center

    Hwang, Heungsun; Takane, Yoshio

    2004-01-01

    We propose an alternative method to partial least squares for path analysis with components, called generalized structured component analysis. The proposed method replaces factors by exact linear combinations of observed variables. It employs a well-defined least squares criterion to estimate model parameters. As a result, the proposed method…

  2. Design of Critical Components

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.; Zaretsky, Erwin V.

    2001-01-01

    Critical component design is based on minimizing product failures that results in loss of life. Potential catastrophic failures are reduced to secondary failures where components removed for cause or operating time in the system. Issues of liability and cost of component removal become of paramount importance. Deterministic design with factors of safety and probabilistic design address but lack the essential characteristics for the design of critical components. In deterministic design and fabrication there are heuristic rules and safety factors developed over time for large sets of structural/material components. These factors did not come without cost. Many designs failed and many rules (codes) have standing committees to oversee their proper usage and enforcement. In probabilistic design, not only are failures a given, the failures are calculated; an element of risk is assumed based on empirical failure data for large classes of component operations. Failure of a class of components can be predicted, yet one can not predict when a specific component will fail. The analogy is to the life insurance industry where very careful statistics are book-kept on classes of individuals. For a specific class, life span can be predicted within statistical limits, yet life-span of a specific element of that class can not be predicted.

  3. The Elusive Third Component

    NASA Technical Reports Server (NTRS)

    Meyers, James F.

    2004-01-01

    The historical development of techniques for measuring three velocity components using laser velocimetry is presented. The techniques are described and their relative merits presented. Many of the approaches currently in use based on the fringe laser velocimeter have yielded inaccurate measurements of turbulence intensity in the on-axis component. A possible explanation for these inaccuracies is presented along with simulation results.

  4. IRRIGATION SYSTEM COMPONENTS

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The common components of a irrigation system are defined in terms of the diversion, delivery, distribution and drainage subsystems. Irrigation systems can be defined on at least three different levels: project, farm and field. Each level will have the same basic set of components regardless of sca...

  5. Expandable Metal Liner For Downhole Components

    DOEpatents

    Hall, David R.; Fox, Joe R.

    2004-10-05

    A liner for an annular downhole component is comprised of an expandable metal tube having indentations along its surface. The indentations are formed in the wall of the tube either by drawing the tube through a die, by hydroforming, by stamping, or roll forming and may extend axially, radially, or spirally along its wall. The indentations accommodate radial and axial expansion of the tube within the downhole component. The tube is inserted into the annular component and deformed to match an inside surface of the component. The tube may be expanded using a hydroforming process or by drawing a mandrel through the tube. The tube may be expanded in such a manner so as to place it in compression against the inside wall of the component. The tube is useful for improving component hydraulics, shielding components from contamination, inhibiting corrosion, and preventing wear to the downhole component during use. It may also be useful for positioning conduit and insulated conductors within the component. An insulating material may be disposed between the tube and the component in order to prevent galvanic corrosion of the downhole component.

  6. Minimal Orderings Revisited

    SciTech Connect

    Peyton, B.W.

    1999-07-01

    When minimum orderings proved too difficult to deal with, Rose, Tarjan, and Leuker instead studied minimal orderings and how to compute them (Algorithmic aspects of vertex elimination on graphs, SIAM J. Comput., 5:266-283, 1976). This paper introduces an algorithm that is capable of computing much better minimal orderings much more efficiently than the algorithm in Rose et al. The new insight is a way to use certain structures and concepts from modern sparse Cholesky solvers to re-express one of the basic results in Rose et al. The new algorithm begins with any initial ordering and then refines it until a minimal ordering is obtained. it is simple to obtain high-quality low-cost minimal orderings by using fill-reducing heuristic orderings as initial orderings for the algorithm. We examine several such initial orderings in some detail.

  7. Principal Component Analysis of breast DCE-MRI Adjusted with a Model Based Method

    PubMed Central

    Eyal, Erez.; Badikhi, Daria; Furman-Haran, Edna; Kelcz, Fredrick; Kirshenbaum, Kevin J.; Degani, Hadassa

    2010-01-01

    Purpose To investigate a fast, objective and standardized method for analyzing breast DCE-MRI applying principal component analysis (PCA) adjusted with a model based method. Materials and Methods 3D gradient-echo dynamic contrast-enhanced breast images of 31 malignant and 38 benign lesions, recorded on a 1.5 Tesla scanner were retrospectively analyzed by PCA and by the model based three-time-point (3TP) method. Results Intensity scaled (IS) and enhancement scaled (ES) datasets were reduced by PCA yielding a 1st IS-eigenvector that captured the signal variation between fat and fibroglandular tissue; two IS-eigenvectors and the two first ES-eigenvectors that captured contrast-enhanced changes, whereas the remaining eigenvectors captured predominantly noise changes. Rotation of the two contrast related eigenvectors led to a high congruence between the projection coefficients and the 3TP parameters. The ES-eigenvectors and the rotation angle were highly reproducible across malignant lesions enabling calculation of a general rotated eigenvector base. ROC curve analysis of the projection coefficients of the two eigenvectors indicated high sensitivity of the 1st rotated eigenvector to detect lesions (AUC>0.97) and of the 2nd rotated eigenvector to differentiate malignancy from benignancy (AUC=0.87). Conclusion PCA adjusted with a model-based method provided a fast and objective computer-aided diagnostic tool for breast DCE-MRI. PMID:19856419

  8. Study of T-wave morphology parameters based on Principal Components Analysis during acute myocardial ischemia

    NASA Astrophysics Data System (ADS)

    Baglivo, Fabricio Hugo; Arini, Pedro David

    2011-12-01

    Electrocardiographic repolarization abnormalities can be detected by Principal Components Analysis of the T-wave. In this work we studied the efect of signal averaging on the mean value and reproducibility of the ratio of the 2nd to the 1st eigenvalue of T-wave (T21W) and the absolute and relative T-wave residuum (TrelWR and TabsWR) in the ECG during ischemia induced by Percutaneous Coronary Intervention. Also, the intra-subject and inter-subject variability of T-wave parameters have been analyzed. Results showed that TrelWR and TabsWR evaluated from the average of 10 complexes had lower values and higher reproducibility than those obtained from 1 complex. On the other hand T21W calculated from 10 complexes did not show statistical diferences versus the T21W calculated on single beats. The results of this study corroborate that, with a signal averaging technique, the 2nd and the 1st eigenvalue are not afected by noise while the 4th to 8th eigenvalues are so much afected by this, suggesting the use of the signal averaged technique before calculation of absolute and relative T-wave residuum. Finally, we have shown that T-wave morphology parameters present high intra-subject stability.

  9. Infant temperament: stability by age, gender, birth order, term status, and socioeconomic status.

    PubMed

    Bornstein, Marc H; Putnick, Diane L; Gartstein, Maria A; Hahn, Chun-Shin; Auestad, Nancy; O'Connor, Deborah L

    2015-01-01

    Two complementary studies focused on stability of infant temperament across the 1st year and considered infant age, gender, birth order, term status, and socioeconomic status (SES) as moderators. Study 1 consisted of 73 mothers of firstborn term girls and boys queried at 2, 5, and 13 months of age. Study 2 consisted of 335 mothers of infants of different gender, birth order, term status, and SES queried at 6 and 12 months. Consistent positive and negative affectivity factors emerged at all time points across both studies. Infant temperament proved stable and robust across gender, birth order, term status, and SES. Stability coefficients for temperament factors and scales were medium to large for shorter (< 9 months) interassessment intervals and small to medium for longer (> 10 months) intervals. PMID:25865034

  10. Higher order Godunov schemes for isothermal hydrodynamics

    NASA Technical Reports Server (NTRS)

    Balsara, Dinshaw S.

    1994-01-01

    In this paper we construct higher order Godunov schemes for isothermal flow. Isothermal hydrodynamics serves as a good representation for several systems of astrophysical interest. The schemes designed here have second-order accuracy in space and time and some are third-order accurate for advection. Moreover, several ingredients of these schemes are essential components of even higher order. The methods designed here have excellent ability to represent smooth flow yet capture shocks with high resolution. Several test problems are presented. The algorithms presented here are compared with other algorithms having a comparable formal order of accuracy.

  11. Infants Communicate in Order to Be Understood

    ERIC Educational Resources Information Center

    Grosse, Gerlind; Behne, Tanya; Carpenter, Malinda; Tomasello, Michael

    2010-01-01

    Infants intentionally communicate with others from before their 1st birthday. But there is some question about how they understand the communicative process. Do they understand that for their request to work the recipient must both understand the request and be cooperatively disposed to fulfill it? On the basis of the study by Shwe and Markman…

  12. Scientific Software Component Technology

    SciTech Connect

    Kohn, S.; Dykman, N.; Kumfert, G.; Smolinski, B.

    2000-02-16

    We are developing new software component technology for high-performance parallel scientific computing to address issues of complexity, re-use, and interoperability for laboratory software. Component technology enables cross-project code re-use, reduces software development costs, and provides additional simulation capabilities for massively parallel laboratory application codes. The success of our approach will be measured by its impact on DOE mathematical and scientific software efforts. Thus, we are collaborating closely with library developers and application scientists in the Common Component Architecture forum, the Equation Solver Interface forum, and other DOE mathematical software groups to gather requirements, write and adopt a variety of design specifications, and develop demonstration projects to validate our approach. Numerical simulation is essential to the science mission at the laboratory. However, it is becoming increasingly difficult to manage the complexity of modern simulation software. Computational scientists develop complex, three-dimensional, massively parallel, full-physics simulations that require the integration of diverse software packages written by outside development teams. Currently, the integration of a new software package, such as a new linear solver library, can require several months of effort. Current industry component technologies such as CORBA, JavaBeans, and COM have all been used successfully in the business domain to reduce software development costs and increase software quality. However, these existing industry component infrastructures will not scale to support massively parallel applications in science and engineering. In particular, they do not address issues related to high-performance parallel computing on ASCI-class machines, such as fast in-process connections between components, language interoperability for scientific languages such as Fortran, parallel data redistribution between components, and massively

  13. First-order inflation

    NASA Technical Reports Server (NTRS)

    Kolb, Edward W.

    1991-01-01

    In the original proposal, inflation occurred in the process of a strongly first-order phase transition. This model was soon demonstrated to be fatally flawed. Subsequent models for inflation involved phase transitions that were second-order, or perhaps weakly first-order; some even involved no phase transition at all. Recently the possibility of inflation during a strongly first-order phase transition has been revived. In this talk I will discuss some models for first-order inflation, and emphasize unique signatures that result if inflation is realized in a first-order transition. Before discussing first-order inflation, I will briefly review some of the history of inflation to demonstrate how first-order inflation differs from other models.

  14. First-order inflation

    SciTech Connect

    Kolb, E.W. Chicago Univ., IL . Enrico Fermi Inst.)

    1990-09-01

    In the original proposal, inflation occurred in the process of a strongly first-order phase transition. This model was soon demonstrated to be fatally flawed. Subsequent models for inflation involved phase transitions that were second-order, or perhaps weakly first-order; some even involved no phase transition at all. Recently the possibility of inflation during a strongly first-order phase transition has been revived. In this talk I will discuss some models for first-order inflation, and emphasize unique signatures that result in inflation is realized in a first-order transition. Before discussing first-order inflation, I will briefly review some of the history of inflation to demonstrate how first-order inflation differs from other models. 58 refs., 3 figs.

  15. Component-specific modeling

    NASA Technical Reports Server (NTRS)

    Mcknight, R. L.

    1985-01-01

    Accomplishments are described for the second year effort of a 3-year program to develop methodology for component specific modeling of aircraft engine hot section components (turbine blades, turbine vanes, and burner liners). These accomplishments include: (1) engine thermodynamic and mission models; (2) geometry model generators; (3) remeshing; (4) specialty 3-D inelastic stuctural analysis; (5) computationally efficient solvers, (6) adaptive solution strategies; (7) engine performance parameters/component response variables decomposition and synthesis; (8) integrated software architecture and development, and (9) validation cases for software developed.

  16. Ceramic component for electrodes

    DOEpatents

    Marchant, David D.

    1979-01-01

    A ceramic component suitable for preparing MHD generator electrodes consists of HfO.sub.2 and sufficient Tb.sub.4 O.sub.7 to stabilize at least 60 volume percent of the HfO.sub.2 into the cubic structure. The ceramic component may also contain a small amount of PrO.sub.2, Yb.sub.2 O.sub.3 or a mixture of both to improve stability and electronic conductivity of the electrode. The component is highly resistant to corrosion by molten potassium seed and molten coal slag in the MHD fluid and exhibits both ionic and electronic conductivity.

  17. Structural materials and components

    NASA Technical Reports Server (NTRS)

    Gagliani, John (Inventor); Lee, Raymond (Inventor)

    1982-01-01

    High density structural (blocking) materials composed of a polyimide filled with glass microballoons. Structural components such as panels which have integral edgings and/or other parts made of the high density materials.

  18. Structural materials and components

    NASA Technical Reports Server (NTRS)

    Gagliani, John (Inventor); Lee, Raymond (Inventor)

    1982-01-01

    High density structural (blocking) materials composed of a polyimide filled with glass microballoons and methods for making such materials. Structural components such as panels which have integral edgings and/or other parts made of the high density materials.

  19. Component Fixturing Method

    NASA Technical Reports Server (NTRS)

    Kling, Daniel (Inventor)

    2014-01-01

    An end-configuration of components to be moved or positioned is first obtained. This end-configuration determines the relative positioning and orientation of the components with respect to each other when in a final, desired configuration. A folding pattern is then obtained that is formed by interior vertices defining corresponding tessellation facets. The folding pattern can be induced to transition from a first folded configuration to a second folded configuration. When in the second folded configuration mounting facets, which are a subset of the tessellation facets, are arranged by the geometry of the folding pattern into positions and orientations with respect to each other that correspond to the end-configuration of the components. A foldable structure is then obtained that folds in accordance with the folding pattern, and the components are affixed to their respective mounting facets.

  20. Structural materials and components

    NASA Technical Reports Server (NTRS)

    Gagliani, John (Inventor); Lee, Raymond (Inventor)

    1983-01-01

    High density structural (blocking) materials composed of a polyimide filled with glass microballoons. Structural components such as panels which have integral edgings and/or other parts made of the high density materials.

  1. On the order of general linear methods.

    SciTech Connect

    Constantinescu, E. M.; Mathematics and Computer Science

    2009-09-01

    General linear (GL) methods are numerical algorithms used to solve ODEs. The standard order conditions analysis involves the GL matrix itself and a starting procedure; however, a finishing method (F) is required to extract the actual ODE solution. The standard order analysis and stability are sufficient for the convergence of any GL method. Nonetheless, using a simple GL scheme, we show that the order definition may be too restrictive. Specifically, the order for GL methods with low order intermediate components may be underestimated. In this note we explore the order conditions for GL schemes and propose a new definition for characterizing the order of GL methods, which is focused on the final result--the outcome of F--and can provide more effective algebraic order conditions.

  2. Develop a Model Component

    NASA Technical Reports Server (NTRS)

    Ensey, Tyler S.

    2013-01-01

    During my internship at NASA, I was a model developer for Ground Support Equipment (GSE). The purpose of a model developer is to develop and unit test model component libraries (fluid, electrical, gas, etc.). The models are designed to simulate software for GSE (Ground Special Power, Crew Access Arm, Cryo, Fire and Leak Detection System, Environmental Control System (ECS), etc. .) before they are implemented into hardware. These models support verifying local control and remote software for End-Item Software Under Test (SUT). The model simulates the physical behavior (function, state, limits and 110) of each end-item and it's dependencies as defined in the Subsystem Interface Table, Software Requirements & Design Specification (SRDS), Ground Integrated Schematic (GIS), and System Mechanical Schematic.(SMS). The software of each specific model component is simulated through MATLAB's Simulink program. The intensiv model development life cycle is a.s follows: Identify source documents; identify model scope; update schedule; preliminary design review; develop model requirements; update model.. scope; update schedule; detailed design review; create/modify library component; implement library components reference; implement subsystem components; develop a test script; run the test script; develop users guide; send model out for peer review; the model is sent out for verifictionlvalidation; if there is empirical data, a validation data package is generated; if there is not empirical data, a verification package is generated; the test results are then reviewed; and finally, the user. requests accreditation, and a statement of accreditation is prepared. Once each component model is reviewed and approved, they are intertwined together into one integrated model. This integrated model is then tested itself, through a test script and autotest, so that it can be concluded that all models work conjointly, for a single purpose. The component I was assigned, specifically, was a

  3. Component fragility research program

    SciTech Connect

    Tsai, N.C.; Mochizuki, G.L.; Holman, G.S.; Lawrence Livermore National Lab., CA )

    1989-11-01

    To demonstrate how high-level'' qualification test data can be used to estimate the ultimate seismic capacity of nuclear power plant equipment, we assessed in detail various electrical components tested by the Pacific Gas Electric Company for its Diablo Canyon plant. As part of our Phase I Component Fragility Research Program, we evaluated seismic fragility for five Diablo Canyon components: medium-voltage (4kV) switchgear; safeguard relay board; emergency light battery pack; potential transformer; and station battery and racks. This report discusses our Phase II fragility evaluation of a single Westinghouse Type W motor control center column, a fan cooler motor controller, and three local starters at the Diablo Canyon nuclear power plant. These components were seismically qualified by means of biaxial random motion tests on a shaker table, and the test response spectra formed the basis for the estimate of the seismic capacity of the components. The seismic capacity of each component is referenced to the zero period acceleration (ZPA) and, in our Phase II study only, to the average spectral acceleration (ASA) of the motion at its base. For the motor control center, the seismic capacity was compared to the capacity of a Westinghouse Five-Star MCC subjected to actual fragility tests by LLNL during the Phase I Component Fragility Research Program, and to generic capacities developed by the Brookhaven National Laboratory for motor control center. Except for the medium-voltage switchgear, all of the components considered in both our Phase I and Phase II evaluations were qualified in their standard commercial configurations or with only relatively minor modifications such as top bracing of cabinets. 8 refs., 67 figs., 7 tabs.

  4. Complete Sequence of pEC012, a Multidrug-Resistant IncI1 ST71 Plasmid Carrying blaCTX-M-65, rmtB, fosA3, floR, and oqxAB in an Avian Escherichia coli ST117 Strain

    PubMed Central

    Pan, Yu-Shan; Zong, Zhi-Yong; Yuan, Li; Du, Xiang-Dang; Huang, Hui; Zhong, Xing-Hao; Hu, Gong-Zheng

    2016-01-01

    A 139,622-bp IncI1 ST71 conjugative plasmid pEC012 from an avian Escherichia coli D-ST117 strain was sequenced, which carried five IS26-bracketed resistance modules: IS26-fosA3-orf1-orf2-Δorf3-IS26, IS26-fip-ΔISEcp1-blaCTX-M-65-IS903D-iroN-IS26, IS26-ΔtnpR-blaTEM-1-rmtB-IS26, IS26-oqxAB-IS26, and IS26-floR-aac(3)-IV-IS26. The backbone of pEC012 was similar to that of several other IncI1 ST71 plasmids: pV408, pM105, and pC271, but these plasmids had different arrangements of multidrug resistance region. In addition, the novel ISEc57 element was identified, which is in the IS21 family. The stepwise emergence of multi-resistance regions demonstrated the accumulation of different resistance determinants through homologous recombination. To the best of our knowledge, this is the first study to identify a multidrug-resistant IncI1 ST71 plasmid carrying blaCTX-M-65, rmtB, fosA3, floR, and oqxAB in an avian E. coli ST117 strain. PMID:27486449

  5. Extended-spectrum beta-lactamase-producing Shiga toxin gene (stx1)-positive Escherichia coli O91:H14 carrying blaCTX-M-15 on an IncI1-ST31 plasmid isolated from a human patient in Germany.

    PubMed

    Arvand, Mardjan; Bettge-Weller, Gudrun; Fruth, Angelika; Uphoff, Helmut; Pfeifer, Yvonne

    2015-05-01

    In 2011, the Shiga toxin- and extended-spectrum β-lactamase (ESBL)-producing Escherichia coli O104:H4 caused a serious outbreak of gastroenteritis in Germany. This strain carried bla(CTX-M-15) and bla(TEM-1) on an IncI1-ST31 plasmid. During screening of individuals at risk for acquisition of the epidemic E. coli O104:H4, we isolated another ESBL-producing and Shiga toxin-positive E. coli belonging to serotype O91:H14 from feces of a human patient. Interestingly, the patient also carried a further ESBL-producing but Shiga toxin-negative E. coli. Both strains harbored bla(CTX-M-15) and bla(TEM-1) on an IncI1-ST31 plasmid, which was indistinguishable regarding size and plasmid restriction pattern from the plasmid of the epidemic E. coli O104:H4 strain. The patient had traveled to India 6 months prior to the isolation of the E. coli strains. This is the first report of an ESBL-producing, Shiga toxin-positive E. coli of serogroup O91. Our data suggest a high propensity of the IncI1-ST31 plasmid to spread in the human and/or animal population. PMID:25801683

  6. Complete Sequence of pEC012, a Multidrug-Resistant IncI1 ST71 Plasmid Carrying bla CTX-M-65, rmtB, fosA3, floR, and oqxAB in an Avian Escherichia coli ST117 Strain.

    PubMed

    Pan, Yu-Shan; Zong, Zhi-Yong; Yuan, Li; Du, Xiang-Dang; Huang, Hui; Zhong, Xing-Hao; Hu, Gong-Zheng

    2016-01-01

    A 139,622-bp IncI1 ST71 conjugative plasmid pEC012 from an avian Escherichia coli D-ST117 strain was sequenced, which carried five IS26-bracketed resistance modules: IS26-fosA3-orf1-orf2-Δorf3-IS26, IS26-fip-ΔISEcp1-bla CTX-M-65-IS903D-iroN-IS26, IS26-ΔtnpR-bla TEM-1-rmtB-IS26, IS26-oqxAB-IS26, and IS26-floR-aac(3)-IV-IS26. The backbone of pEC012 was similar to that of several other IncI1 ST71 plasmids: pV408, pM105, and pC271, but these plasmids had different arrangements of multidrug resistance region. In addition, the novel ISEc57 element was identified, which is in the IS21 family. The stepwise emergence of multi-resistance regions demonstrated the accumulation of different resistance determinants through homologous recombination. To the best of our knowledge, this is the first study to identify a multidrug-resistant IncI1 ST71 plasmid carrying bla CTX-M-65, rmtB, fosA3, floR, and oqxAB in an avian E. coli ST117 strain. PMID:27486449

  7. Crystallization in two-component Coulomb systems.

    PubMed

    Bonitz, M; Filinov, V S; Fortov, V E; Levashov, P R; Fehske, H

    2005-12-01

    The analysis of Coulomb crystallization is extended from one-component to two-component plasmas. Critical parameters for the existence of Coulomb crystals are derived for both classical and quantum crystals. In the latter case, a critical mass ratio of the two charged components is found, which is of the order of 80. Thus, holes in semiconductors with sufficiently flat valence bands are predicted to spontaneously order into a regular lattice. Such hole crystals are intimately related to ion Coulomb crystals in white dwarf and neutron stars as well as to ion crystals produced in the laboratory. A unified phase diagram of two-component Coulomb crystals is presented and is verified by first-principles computer simulations. PMID:16384315

  8. NASTRAN component-mode synthesis

    NASA Technical Reports Server (NTRS)

    Guyan, R. J.

    1976-01-01

    Procedure for dynamic substructuring analysis technique is generally as follows: calculation of component modes; selection of component normal modes, calculation of component generalized matrices, assembly of system matrices, and computation of normal modes; and retrieval of component response.

  9. Phase transitions three-component superfluid

    NASA Astrophysics Data System (ADS)

    Carlstrom, Johan; Babaev, Egor

    2014-03-01

    We discuss phase transitions in three-component models of superfluidity and superconductivity. We present Monte Carlo simulations showing that for certain types of inter-component interactions, these systems exhibit novel types of first order phase transitions that are driven by spin-waves. Supported by NSF CAREER Award DMR-0955902, Knut and Alice Wallenberg Foundation through the Royal Swedish Academy of Sciences andSwedish Research Council.

  10. Encyclopedia of Software Components

    NASA Technical Reports Server (NTRS)

    Warren, Lloyd V. (Inventor); Beckman, Brian C. (Inventor)

    1997-01-01

    Intelligent browsing through a collection of reusable software components is facilitated with a computer having a video monitor and a user input interface such as a keyboard or a mouse for transmitting user selections, by presenting a picture of encyclopedia volumes with respective visible labels referring to types of software, in accordance with a metaphor in which each volume includes a page having a list of general topics under the software type of the volume and pages having lists of software components for each one of the generic topics, altering the picture to open one of the volumes in response to an initial user selection specifying the one volume to display on the monitor a picture of the page thereof having the list of general topics and altering the picture to display the page thereof having a list of software components under one of the general topics in response to a next user selection specifying the one general topic, and then presenting a picture of a set of different informative plates depicting different types of information about one of the software components in response to a further user selection specifying the one component.

  11. Scientific Component Technology Initiative

    SciTech Connect

    Kohn, S; Bosl, B; Dahlgren, T; Kumfert, G; Smith, S

    2003-02-07

    The laboratory has invested a significant amount of resources towards the development of high-performance scientific simulation software, including numerical libraries, visualization, steering, software frameworks, and physics packages. Unfortunately, because this software was not designed for interoperability and re-use, it is often difficult to share these sophisticated software packages among applications due to differences in implementation language, programming style, or calling interfaces. This LDRD Strategic Initiative investigated and developed software component technology for high-performance parallel scientific computing to address problems of complexity, re-use, and interoperability for laboratory software. Component technology is an extension of scripting and object-oriented software development techniques that specifically focuses on the needs of software interoperability. Component approaches based on CORBA, COM, and Java technologies are widely used in industry; however, they do not support massively parallel applications in science and engineering. Our research focused on the unique requirements of scientific computing on ASCI-class machines, such as fast in-process connections among components, language interoperability for scientific languages, and data distribution support for massively parallel SPMD components.

  12. Encyclopedia of software components

    NASA Technical Reports Server (NTRS)

    Vanwarren, Lloyd (Inventor); Beckman, Brian C. (Inventor)

    1991-01-01

    Intelligent browsing through a collection of reusable software components is facilitated with a computer having a video monitor and a user input interface such as a keyboard or a mouse for transmitting user selections, by presenting a picture of encyclopedia volumes with respective visible labels referring to types of software, in accordance with a metaphor in which each volume includes a page having a list of general topics under the software type of the volume and pages having lists of software components for each one of the generic topics, altering the picture to open one of the volumes in response to an initial user selection specifying the one volume to display on the monitor a picture of the page thereof having the list of general topics and altering the picture to display the page thereof having a list of software components under one of the general topics in response to a next user selection specifying the one general topic, and then presenting a picture of a set of different informative plates depicting different types of information about one of the software components in response to a further user selection specifying the one component.

  13. Multiple ordering in magnetite.

    NASA Technical Reports Server (NTRS)

    Cullen, J. R.; Callen, E. R.

    1973-01-01

    Results of a self-consistent band calculation of the ground-state energy and charge orderings based on a tight-binding scheme in magnetite are presented. They show that below a critical (about 2.2) value of the ratio of interatomic Coulomb energy to bandwidth the lowest energy state has no order. Between this critical value and 2.5, the preferred state is multiply ordered.

  14. After order 636

    SciTech Connect

    Katz, M.G.

    1995-02-01

    Through its Order 636, the Federal Energy Regulatory Commission (FERC) completed a restructuring of the natural gas industry. The order severed the last links in the chain linking gas producers to pipeline companies to local gas distribution companies (LDCs) to customers. Before Order 636 took effect, many predicted electric power generation, particularly by cogenerators and independent power producers (IPPs), would be a major growth area for natural gas. In fact, what Order 636 has shown is, that timing is everything, and that it`s difficult to sort out the effect of one agent of change when many others are at work.

  15. Order, Disorder and Confinement

    SciTech Connect

    D'Elia, M.; Di Giacomo, A.; Pica, C.

    2006-01-12

    Studying the order of the chiral transition for Nf = 2 is of fundamental importance to understand the mechanism of color confinement. We present results of a numerical investigation on the order of the transition by use of a novel strategy in finite size scaling analysis. The specific heat and a number of susceptibilities are compared with the possible critical behaviours. A second order transition in the O(4) and O(2) universality classes are excluded. Substantial evidence emerges for a first order transition. Results are in agreement with those found by studying the scaling properties of a disorder parameter related to the dual superconductivity mechanism of color confinement.

  16. Component-specific modeling

    NASA Technical Reports Server (NTRS)

    Mcknight, R. L.

    1985-01-01

    A series of interdisciplinary modeling and analysis techniques that were specialized to address three specific hot section components are presented. These techniques will incorporate data as well as theoretical methods from many diverse areas including cycle and performance analysis, heat transfer analysis, linear and nonlinear stress analysis, and mission analysis. Building on the proven techniques already available in these fields, the new methods developed will be integrated into computer codes to provide an accurate, and unified approach to analyzing combustor burner liners, hollow air cooled turbine blades, and air cooled turbine vanes. For these components, the methods developed will predict temperature, deformation, stress and strain histories throughout a complete flight mission.

  17. Components in the Pipeline

    SciTech Connect

    Gorton, Ian; Wynne, Adam S.; Liu, Yan; Yin, Jian

    2011-02-24

    Scientists commonly describe their data processing systems metaphorically as software pipelines. These pipelines input one or more data sources and apply a sequence of processing steps to transform the data and create useful results. While conceptually simple, pipelines often adopt complex topologies and must meet stringent quality of service requirements that place stress on the software infrastructure used to construct the pipeline. In this paper we describe the MeDICi Integration Framework, which is a component-based framework for constructing complex software pipelines. The framework supports composing pipelines from distributed heterogeneous software components and provides mechanisms for controlling qualities of service to meet demanding performance, reliability and communication requirements.

  18. Blood Component Therapy

    PubMed Central

    Kelton, J. G.

    1984-01-01

    Human blood has been transfused for about 60-70 years. Over this time, the practice of blood transfusion has changed dramatically. One major change is the separation of blood into its various components. As a result, the patient can receive only the blood component in which he is deficient. In this way, the risk of side effects—particularly hepatitis—is lessened. This article briefly reviews the various blood products, the indications for their use, and some associated risks. These products include oxygen-carrying products, plasma products, blood products used to correct hemostatic defects, and immune globulin. PMID:21279096

  19. Ceramic component for electrodes

    DOEpatents

    Marchant, David D.; Bates, J. Lambert

    1980-01-01

    A ceramic component suitable for preparing MHD generator electrodes having the compositional formula: Y.sub.x (Mg.sub.y Cr.sub.z).sub.w Al.sub.(1-w) O.sub.3 where x=0.9 to 1.05, y=0.02 to 0.2, z=0.8 to 1.05 and w=1.0 to 0.5. The component is resistant to the formation of hydration products in an MHD environment, has good electrical conductivity and exhibits a lower electrochemical corrosion rate than do comparable compositions of lanthanum chromite.

  20. Bioregions and World Order.

    ERIC Educational Resources Information Center

    Breakthrough, 1985

    1985-01-01

    What bioregions can do to contribute to world order and security is discussed in this newsletter. A bioregion is defined as an identifiable geographical area of interacting life-systems that is relatively self-sustaining in the ever-renewing processes of nature. Articles included are: "Bioregionalism and World Order" (Gerald Mische); "Bioregions:…

  1. ASDC Order Tools

    Atmospheric Science Data Center

    2012-04-17

    ... users to search our data holdings without logging in to the system. The user, however, must log in before ordering the data. ... Reverb, developed by Earth Science Data and Information System (ESDIS), gives the user community an improved search and order ...

  2. On mechanisms triggering the levees failure along the Foenna stream on 1st January 2006 and which caused the flooding in the urban area of Sinalunga, Tuscany Region (Italy). A case study

    NASA Astrophysics Data System (ADS)

    Camici, Stefania; Moramarco, Tommaso; Brocca, Luca; Melone, Florisa; Lapenna, Vincenzo; Perrone, Angela; Loperte, Antonio

    2010-05-01

    On 1st January 2006, during an ordinary flood event, a levee failure along the Foenna stream caused the flooding in the urban area of Sinalunga, a small town located in Tuscany region (Italy). The event was monitored by a public agency with the responsibility for the control and maintenance of the natural channel networks. Long time before of flooding, people living in the surrounding area of the stream blamed the presence of wild animals and of numerous burrows along the levees. Although the numerous actions of maintenance along the levees mainly for removing the burrows, a levee seepage occurred during that flood. The presence of an outflow located on the downstream face, almost 2 m below the levee top, caused the spurt of brown water denoting the presence of sediment erosion. On the upstream face of levee, a little hole of about 30 cm at the same height of the outflow was discovered. Although the agency workers tried to close the hole by using appropriate blankets, in short time the top of the levee subsided and the overtopping flow caused a trapezoidal breach typical for an earth-fill embankment. The formation of breach was so fast that in a little more of one hour the urban area near to the Foenna stream was flooded causing high economic damages. Mechanisms triggered the levees failure are the object of this work. The analysis of the event has been first addressed to assess the state of-fact of levees conditions along the Foenna stream, thus to understand how much the activity of wild animals, in particular that of porcupine, may have affected the hydraulic safety of the embankment. At the purpose, after the event, topographical surveys of cross sections have been done along with tomographic surveys by geoelectric technique for investigating the possible presence, besides of burrows, also of tunnels dug into the levees by animals. Then, the analysis of hydrometeorological conditions of the event has allowed to better understand the evolution of the flood and

  3. Informed Test Component Weighting.

    ERIC Educational Resources Information Center

    Rudner, Lawrence M.

    2001-01-01

    Identifies and evaluates alternative methods for weighting tests. Presents formulas for composite reliability and validity as a function of component weights and suggests a rational process that identifies and considers trade-offs in determining weights. Discusses drawbacks to implicit weighting and explicit weighting and the difficulty of…

  4. Revisiting Wilson's Moral Components.

    ERIC Educational Resources Information Center

    Straughan, Roger

    2000-01-01

    Discusses the reasons why educational researchers and teachers never embraced the ideas of John Wilson as they related to his components of morality in moral education. States that through this examination, the strengths and weaknesses of Wilson's approach can be appraised. (CMK)

  5. Molecular Models Candy Components

    ERIC Educational Resources Information Center

    Coleman, William F.

    2007-01-01

    An explanation of various principles of chemistry in a paper by Fanny Ennever by the use of candy is described. The paper explains components of sucrose and the invert sugar that results from the hydrolysis of sucrose and will help students in determining whether the products are indeed hydrates of carbon.

  6. Revealing Optical Components

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The Optical Vector Analyzer (OVA) 1550 significantly reduces the time and cost of testing sophisticated optical components. The technology grew from the research Luna Technologies' Dr. Mark Froggatt conducted on optical fiber strain measurement while working at Langley Research Center. Dr. Froggatt originally developed the technology for non- destructive evaluation testing at Langley. The new technique can provide 10,000 independent strain measurements while adding less than 10 grams to the weight of the vehicle. The OVA is capable of complete linear characterization of single-mode optical components used in high- bit-rate applications. The device can test most components over their full range in less than 30 seconds, compared to the more than 20 minutes required by other testing methods. The dramatically shortened measurement time results in increased efficiency in final acceptance tests of optical devices, and the comprehensive data produced by the instrument adds considerable value for component consumers. The device eliminates manufacturing bottlenecks, while reducing labor costs and wasted materials during production.

  7. Liquid rocket valve components

    NASA Technical Reports Server (NTRS)

    1973-01-01

    A monograph on valves for use with liquid rocket propellant engines is presented. The configurations of the various types of valves are described and illustrated. Design criteria and recommended practices for the various valves are explained. Tables of data are included to show the chief features of valve components in use on operational vehicles.

  8. Developing a Model Component

    NASA Technical Reports Server (NTRS)

    Fields, Christina M.

    2013-01-01

    The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

  9. Developing a Model Component

    NASA Technical Reports Server (NTRS)

    Fields, Christina M.

    2013-01-01

    The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is,. responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) is a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The purpose of the UCTS is to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems s:luring their development. As an intern at KSC, my assignment was to develop a model component for the UCTS. I was given a fluid component (drier) to model in Matlab. The drier was a Catch All replaceable core type filter-drier. The filter-drier provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-drier also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. I completed training for UNIX and Simulink to help aid in my assignment. The filter-drier was modeled by determining affects it has on the pressure, velocity and temperature of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my model filter-drier in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements.

  10. Court Ordered Desegregation

    ERIC Educational Resources Information Center

    Reber, Sarah J.

    2005-01-01

    The effect of the court ordered desegregation plans, on trends in segregation and white flight, are estimated. The effect of availability of school districts and other factors on the white flight across districts is also mentioned.

  11. 'Good palliative care' orders.

    PubMed

    Maddocks, I

    1993-01-01

    A Select Committee of the Parliament of South Australia, considering revisions to legislation governing care of the dying, did not support allowing doctors to assist suicide. They recommended that no liability attach to the provision of reasonable palliative care which happens to shorten life. The Committee affirmed the suggestion that positive open orders to provide 'good palliative care' should replace 'do not resuscitate' orders. PMID:7506978

  12. Component-specific modeling

    NASA Technical Reports Server (NTRS)

    Mcknight, R. L.

    1984-01-01

    A series of interdisciplinary modeling and analysis techniques that were specialized to address three specific hot section components are presented. These techniques will incorporate data as well as theoretical methods from many diverse areas including cycle and performance analysis, heat transfer analysis, linear and nonlinear stress analysis, and mission analysis. Building on the proven techniques already available in these fields, the new methods developed will be integrated into computer codes to provide an accurate, efficient and unified approach to analyzing combustor burner liners, hollow air-cooled turbine blades and air-cooled turbine vanes. For these components, the methods developed will predict temperature, deformation, stress and strain histories throughout a complete flight mission.

  13. Bacterial Cell Wall Components

    NASA Astrophysics Data System (ADS)

    Ginsberg, Cynthia; Brown, Stephanie; Walker, Suzanne

    Bacterial cell-surface polysaccharides cells are surrounded by a variety of cell-surface structures that allow them to thrive in extreme environments. Components of the cell envelope and extracellular matrix are responsible for providing the cells with structural support, mediating intercellular communication, allowing the cells to move or to adhere to surfaces, protecting the cells from attack by antibiotics or the immune system, and facilitating the uptake of nutrients. Some of the most important cell wall components are polysaccharide structures. This review discusses the occurrence, structure, function, and biosynthesis of the most prevalent bacterial cell surface polysaccharides: peptidoglycan, lipopolysaccharide, arabinogalactan, and lipoarabinomannan, and capsular and extracellular polysaccharides. The roles of these polysaccharides in medicine, both as drug targets and as therapeutic agents, are also described.

  14. Diffusion bonding aeroengine components

    NASA Astrophysics Data System (ADS)

    Fitzpatrick, G. A.; Broughton, T.

    1988-10-01

    The use of diffusion bonding processes at Rolls-Royce for the manufacture of titanium-alloy aircraft engine components and structures is described. A liquid-phase diffusion bonding process called activated diffusion bonding has been developed for the manufacture of the hollow titanium wide chord fan blade. In addition, solid-state diffusion bonding is being used in the manufacture of hollow vane/blade airfoil constructions mainly in conjunction with superplastic forming and hot forming techniques.

  15. Components for solar energy

    NASA Technical Reports Server (NTRS)

    1973-01-01

    A requirement for the direct technological utilization of solar energy is a device for capturing and absorbing the available sunlight. These devices are commonly termed collectors. Because of the highly variable nature of sunlight, a facility for storing the collected energy is often essential. A device for direct conversion of light into electricity, which depends for operation on incident sunlight, is the photovoltaic cell. These components for solar energy systems are considered.

  16. Component for thermoelectric generator

    DOEpatents

    Purdy, David L.

    1977-01-01

    In a thermoelectric generator, a component comprises a ceramic insulator, having over limited areas thereof, each area corresponding to a terminal end of thermoelectric wires, a coating of a first metal which adheres to the insulator, and an electrical thermoelectric junction including a second metal which wets said first metal and adheres to said terminal ends but does not wet said insulator, and a cloth composed of electrically insulating threads interlaced with thermoelectric wires.

  17. MEA Component Durability

    SciTech Connect

    Frisk, J. W.; Hicks, M.T.; Atanasoski, R. T.; Boand, W. M.; Schmoeckel, A. K.; Kurkowski, M. J.

    2004-11-01

    Membrane electrode assembly (MEA) lifetime of greater than 40,000 hours remains a goal of the fuel cell industry. However, there is a lack of fundamental understanding of the mechanisms of MEA degradation. Specifically, the relationship between component physical property changes and MEA performance decay has not been established. We report preliminary data relating changes in gas diffusion layer (GDL) physical properties to fuel cell performance decay.

  18. Solid state lighting component

    DOEpatents

    Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

    2010-10-26

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  19. Solid state lighting component

    DOEpatents

    Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

    2012-07-10

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  20. Injection molded component

    SciTech Connect

    James, Allister W; Arrell, Douglas J

    2014-09-30

    An intermediate component includes a first wall member, a leachable material layer, and a precursor wall member. The first wall member has an outer surface and first connecting structure. The leachable material layer is provided on the first wall member outer surface. The precursor wall member is formed adjacent to the leachable material layer from a metal powder mixed with a binder material, and includes second connecting structure.

  1. Chondrites and Their Components

    NASA Astrophysics Data System (ADS)

    Scott, E. R. D.; Krot, A. N.

    Chondrites are extraordinary mixtures of materials with diverse origins that formed around other stars, in the solar nebula, and in their parent asteroids. Most chondrites were so severely altered by aqueous fluids, thermal metamorphism, and impacts that the original characteristics of their components have been largely erased. But a few pristine chondrites have preserved an exquisite mineralogical, chemical, isotopic, and chronological record of the first few million years of solar system history. The properties of diverse types of carbonaceous, ordinary, and enstatite chondrites focusing on the most pristine samples are reviewed to establish the chemical, isotopic, and mineralogical properties and origins of their components and to elucidate the asteroidal processes that modified them. Refractory inclusions - amoeboid olivine aggregates and Ca-Al-rich inclusions - were the first solids to form in the solar nebula near to the protosun. Chondrules and associated metallic Fe-Ni grains were still forming several million years later when the earliest planetesimals, which melted due to heat from 26Al decay, were colliding. In the least-altered chondrites, matrix material, which coats chondrules and other components, is largely composed of micrometer-sized silicates and amorphous materials, which formed at high temperatures, plus small amounts (up to 200 ppm) of presolar oxides and silicates.

  2. Surface mount component jig

    DOEpatents

    Kronberg, James W.

    1990-08-07

    A device for bending and trimming the pins of a dual-inline-package component and the like for surface mounting rather than through mounting to a circuit board comprises, in a first part, in pin cutter astride a holder having a recess for holding the component, a first spring therebetween, and, in a second part, two flat members pivotally interconnected by a hinge and urged to an upward peaked position from a downward peaked position by a second spring. As a downward force is applied to the pin cutter it urges the holder downward, assisted by the first spring and a pair of ridges riding on shoulders of the holder, to carry the component against the upward peaked flat members which guide the pins outwardly. As the holder continues downwardly, the flat members pivot to the downward peaked position bending the pins upwardly against the sides of the holder. When the downward movement is met with sufficient resistance, the ridges of the pin cutter ride over the holder's shoulders to continue downward to cut any excess length of pin.

  3. Energetic component treatability study

    SciTech Connect

    Gildea, P.D.; Brandon, S.L.; Brown, B.G.

    1997-11-01

    The effectiveness of three environmentally sound processes for small energetic component disposal was examined experimentally in this study. The three destruction methods, batch reactor supercritical water oxidation, sodium hydroxide base hydrolysis and calcium carbonate cookoff were selected based on their potential for producing a clean solid residue and minimum release of toxic gases after component detonation. The explosive hazard was destroyed by all three processes. Batch supercritical water oxidation destroyed both the energetics and organics. Further development is desired to optimize process parameters. Sodium hydroxide base hydrolysis and calcium carbonate cookoff results indicated the potential for scrubbing gaseous detonation products. Further study and testing are needed to quantify the effectiveness of these later two processes for full-scale munition destruction. The preliminary experiments completed in this study have demonstrated the promise of these three processes as environmentally sound technologies for energetic component destruction. Continuation of these experimental programs is strongly recommended to optimize batch supercritical water oxidation processing, and to fully develop the sodium hydroxide base hydrolysis and calcium carbonate cookoff technologies.

  4. Inkjet deposited circuit components

    NASA Astrophysics Data System (ADS)

    Bidoki, S. M.; Nouri, J.; Heidari, A. A.

    2010-05-01

    All-printed electronics as a means of achieving ultra-low-cost electronic circuits has attracted great interest in recent years. Inkjet printing is one of the most promising techniques by which the circuit components can be ultimately drawn (i.e. printed) onto the substrate in one step. Here, the inkjet printing technique was used to chemically deposit silver nanoparticles (10-200 nm) simply by ejection of silver nitrate and reducing solutions onto different substrates such as paper, PET plastic film and textile fabrics. The silver patterns were tested for their functionality to work as circuit components like conductor, resistor, capacitor and inductor. Different levels of conductivity were achieved simply by changing the printing sequence, inks ratio and concentration. The highest level of conductivity achieved by an office thermal inkjet printer (300 dpi) was 5.54 × 105 S m-1 on paper. Inkjet deposited capacitors could exhibit a capacitance of more than 1.5 nF (parallel plate 45 × 45 mm2) and induction coils displayed an inductance of around 400 µH (planar coil 10 cm in diameter). Comparison of electronic performance of inkjet deposited components to the performance of conventionally etched items makes the technique highly promising for fabricating different printed electronic devices.

  5. Higher Order Thinking in the Dance Studio

    ERIC Educational Resources Information Center

    Moffett, Ann-Thomas

    2012-01-01

    The author identifies higher order thinking as an essential component of dance training for students of all ages and abilities. Weaving together insights from interviews with experts in the field of dance education with practical pedagogical applications within an Improvisation and Composition class for talented and gifted youth, this article…

  6. Arguments from Developmental Order.

    PubMed

    Stöckle-Schobel, Richard

    2016-01-01

    In this article, I investigate a special type of argument regarding the role of development in theorizing about psychological processes and cognitive capacities. Among the issues that developmental psychologists study, discovering the ontogenetic trajectory of mechanisms or capacities underpinning our cognitive functions ranks highly. The order in which functions are developed or capacities are acquired is a matter of debate between competing psychological theories, and also philosophical conceptions of the mind - getting the role and the significance of the different steps in this order right could be seen as an important virtue of such theories. Thus, a special kind of strategy in arguments between competing philosophical or psychological theories is using developmental order in arguing for or against a given psychological claim. In this article, I will introduce an analysis of arguments from developmental order, which come in two general types: arguments emphasizing the importance of the early cognitive processes and arguments emphasizing the late cognitive processes. I will discuss their role in one of the central tools for evaluating scientific theories, namely in making inferences to the best explanation. I will argue that appeal to developmental order is, by itself, an insufficient criterion for theory choice and has to be part of an argument based on other core explanatory or empirical virtues. I will end by proposing a more concerted study of philosophical issues concerning (cognitive) development, and I will present some topics that also pertain to a full-fledged 'philosophy of development.' PMID:27242648

  7. Birth Order and Psychopathology

    PubMed Central

    Risal, Ajay; Tharoor, Hema

    2012-01-01

    Context: Ordinal position the child holds within the sibling ranking of a family is related to intellectual functioning, personality, behavior, and development of psychopathology. Aim: To study the association between birth order and development of psychopathology in patients attending psychiatry services in a teaching hospital. Settings and Design: Hospital-based cross-sectional study. Materials and Methods: Retrospective file review of three groups of patients was carried out. Patient-related variables like age of onset, birth order, family type, and family history of mental illness were compared with psychiatry diagnosis (ICD-10) generated. Statistical Analysis: SPSS 13; descriptive statistics and one-way analysis of variance (ANOVA) were used. Results: Mean age of onset of mental illness among the adult general psychiatry patients (group I, n = 527) was found to be 33.01 ± 15.073, while it was 11.68 ± 4.764 among the child cases (group II, n = 47) and 26.74 ± 7.529 among substance abuse cases (group III, n = 110). Among group I patients, commonest diagnosis was depression followed by anxiety and somatoform disorders irrespective of birth order. Dissociative disorders were most prevalent in the first born child (36.7%) among group II patients. Among group III patients, alcohol dependence was maximum diagnosis in all birth orders. Conclusions: Depression and alcohol dependence was the commonest diagnosis in adult group irrespective of birth order. PMID:24479023

  8. Arguments from Developmental Order

    PubMed Central

    Stöckle-Schobel, Richard

    2016-01-01

    In this article1, I investigate a special type of argument regarding the role of development in theorizing about psychological processes and cognitive capacities. Among the issues that developmental psychologists study, discovering the ontogenetic trajectory of mechanisms or capacities underpinning our cognitive functions ranks highly. The order in which functions are developed or capacities are acquired is a matter of debate between competing psychological theories, and also philosophical conceptions of the mind – getting the role and the significance of the different steps in this order right could be seen as an important virtue of such theories. Thus, a special kind of strategy in arguments between competing philosophical or psychological theories is using developmental order in arguing for or against a given psychological claim. In this article, I will introduce an analysis of arguments from developmental order, which come in two general types: arguments emphasizing the importance of the early cognitive processes and arguments emphasizing the late cognitive processes. I will discuss their role in one of the central tools for evaluating scientific theories, namely in making inferences to the best explanation. I will argue that appeal to developmental order is, by itself, an insufficient criterion for theory choice and has to be part of an argument based on other core explanatory or empirical virtues. I will end by proposing a more concerted study of philosophical issues concerning (cognitive) development, and I will present some topics that also pertain to a full-fledged ‘philosophy of development.’ PMID:27242648

  9. Logistic equation of arbitrary order

    NASA Astrophysics Data System (ADS)

    Grabowski, Franciszek

    2010-08-01

    The paper is concerned with the new logistic equation of arbitrary order which describes the performance of complex executive systems X vs. number of tasks N, operating at limited resources K, at non-extensive, heterogeneous self-organization processes characterized by parameter f. In contrast to the classical logistic equation which exclusively relates to the special case of sub-extensive homogeneous self-organization processes at f=1, the proposed model concerns both homogeneous and heterogeneous processes in sub-extensive and super-extensive areas. The parameter of arbitrary order f, where -∞component of the system during the service of each task, Si is the time of serving the task by the ith component, and Z is the think time of a given process. In the general case of complex system, parameters Vi, Si, i and Z can have values in the range from 0 to +∞. In this way the new equation includes all possible cases of a complex executive system’s operation. Furthermore, it allows us to define the optimal matching point between X and N with f as the parameter. It also helps to balance the load in complex systems and to equip artificial systems with self-optimization mechanisms similar to those observed in natural systems.

  10. Concomitant Ordering and Symmetry Lowering

    ERIC Educational Resources Information Center

    Boo, William O. J.; Mattern, Daniell L.

    2008-01-01

    Examples of concomitant ordering include magnetic ordering, Jahn-Teller cooperative ordering, electronic ordering, ionic ordering, and ordering of partially-filled sites. Concomitant ordering sets in when a crystal is cooled and always lowers the degree of symmetry of the crystal. Concomitant ordering concepts can also be productively applied to…

  11. Acoustic wave levitation: Handling of components

    NASA Astrophysics Data System (ADS)

    Vandaele, Vincent; Delchambre, Alain; Lambert, Pierre

    2011-06-01

    Apart from contact micromanipulation, there exists a large variety of levitation techniques among which standing wave levitation will be proposed as a way to handle (sub)millimetric components. This paper will compare analytical formulas to calculate the order of magnitude of the levitation force. It will then describe digital simulation and experimental levitation setup. Stable levitation of various components (cardboard, steel washer, ball, ceramic capacity, water droplet) was shown along 5 degrees of freedom: The only degree of freedom that could not be mastered was the rotation about the symmetry axis of the acoustic field. More importantly, the present work will show the modification of the orientation of the radial force component in the presence of an object disturbing the acoustic field. This property can be used as a new feeding strategy as it means that levitating components are spontaneously pushed toward grippers in an acoustic plane standing wave.

  12. Older Americans Act Amendments of 1987: A Summary of Provisions. Public Law 100-175. An Information Paper Prepared for Use by the Special Committee on Aging. United States Senate, 100th Congress, 1st Session.

    ERIC Educational Resources Information Center

    O'Shaughnessy, Carol

    The Older American Act Amendments of 1987 (Public Law 100-175) contain no major overhaul of the Act, but new provisions do significantly expand certain service components of the state and area agency on aging program under title III to address the special needs of certain populations, including the frail elderly living at home, residents of…

  13. High temperature two component explosive

    DOEpatents

    Mars, James E.; Poole, Donald R.; Schmidt, Eckart W.; Wang, Charles

    1981-01-01

    A two component, high temperature, thermally stable explosive composition comprises a liquid or low melting oxidizer and a liquid or low melting organic fuel. The oxidizer and fuel in admixture are incapable of substantial spontaneous exothermic reaction at temperatures on the order of 475.degree. K. At temperatures on the order of 475.degree. K., the oxidizer and fuel in admixture have an activation energy of at least about 40 kcal/mol. As a result of the high activation energy, the preferred explosive compositions are nondetonable as solids at ambient temperature, and become detonable only when heated beyond the melting point. Preferable oxidizers are selected from alkali or alkaline earth metal nitrates, nitrites, perchlorates, and/or mixtures thereof. Preferred fuels are organic compounds having polar hydrophilic groups. The most preferred fuels are guanidinium nitrate, acetamide and mixtures of the two. Most preferred oxidizers are eutectic mixtures of lithium nitrate, potassium nitrate and sodium nitrate, of sodium nitrite, sodium nitrate and potassium nitrate, and of potassium nitrate, calcium nitrate and sodium nitrate.

  14. Land and World Order.

    ERIC Educational Resources Information Center

    Mische, Patricia, Ed.; And Others

    1982-01-01

    The papers in this publication discuss the land and how what happens to the land affects us. The publication is one in a series of monographs that examine the linkages between local and global concerns and explore alternative world futures. Examples of topics discussed in the papers follow. The paper "Land and World Order" examines implications of…

  15. The Order Pseudonocardiales

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Order Pseudonocardiales is made of up a single family Pseudonocardiaceae which forms a distinct cluster between the Frankineae and Streptomycineae when members of the taxa are subjected to 16S rRNA gene phylogenetic analysis. The family contains 26 genera including Pseudonocardia, Actinoalloteic...

  16. Memory for Serial Order.

    ERIC Educational Resources Information Center

    Lewandowsky, Stephan; Murdock, Bennet B., Jr.

    1989-01-01

    An extension to Murdock's Theory of Distributed Associative Memory, based on associative chaining between items, is presented. The extended theory is applied to several serial order phenomena, including serial list learning, delayed recall effects, partial report effects, and buildup and release from proactive interference. (TJH)

  17. The Birth Order Puzzle.

    ERIC Educational Resources Information Center

    Zajonc, R. B.; And Others

    1979-01-01

    Discusses the controversy of the relationship between birth order and intellectual performance through a detailed evaluation of the confluence model which assumes that the rate of intellectual growth is a function of the intellectual environment within the family and associated with the special circumstances of last children. (CM)

  18. Birth Order Debate Resolved?

    ERIC Educational Resources Information Center

    Zajonc, R. B.

    2001-01-01

    Critiques Rodgers et al.'s June 2000 research on the relation between birth order and intelligence, which suggests that it is a methodological illusion. Explains how the intellectual environment and the teaching function (whereby older children tutor younger ones) contribute to the growth of intellectual maturity, the first negatively and the…

  19. Order Lepidoptera Linnaeus, 1758.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Based on two recent molecular analyses, augmented by the discovery of several published or unpublished novel morphological synapomorphies, a new classification is proposed for the order Lepidoptera. The new classification is more consistent with our growing knowledge of the phylogeny of the group an...

  20. Education and World Order

    ERIC Educational Resources Information Center

    Jones, Phillip W.

    2007-01-01

    The impact on educational analysis of mainstream international relations (IR) theories is yet to realize its full potential. The problem of education in relation to the construction of world order is considered in relation to core developments in IR theory since the Second World War. In particular, the global architecture of education is seen as a…

  1. Advanced Power Electronics Components

    NASA Technical Reports Server (NTRS)

    Schwarze, Gene E.

    2004-01-01

    This paper will give a description and status of the Advanced Power Electronics Materials and Components Technology program being conducted by the NASA Glenn Research Center for future aerospace power applications. The focus of this research program is on the following: 1) New and/or significantly improved dielectric materials for the development of power capacitors with increased volumetric efficiency, energy density, and operating temperature. Materials being investigated include nanocrystalline and composite ceramic dielectrics and diamond-like carbon films; 2) New and/or significantly improved high frequency, high temperature, low loss soft magnetic materials for the development of transformers/inductors with increased power/energy density, electrical efficiency, and operating temperature. Materials being investigated include nanocrystalline and nanocomposite soft magnetic materials; 3) Packaged high temperature, high power density, high voltage, and low loss SiC diodes and switches. Development of high quality 4H- and 6H- SiC atomically smooth substrates to significantly improve device performance is a major emphasis of the SiC materials program; 4) Demonstration of high temperature (> 200 C) circuits using the components developed above.

  2. Prognostics for Microgrid Components

    NASA Technical Reports Server (NTRS)

    Saxena, Abhinav

    2012-01-01

    Prognostics is the science of predicting future performance and potential failures based on targeted condition monitoring. Moving away from the traditional reliability centric view, prognostics aims at detecting and quantifying the time to impending failures. This advance warning provides the opportunity to take actions that can preserve uptime, reduce cost of damage, or extend the life of the component. The talk will focus on the concepts and basics of prognostics from the viewpoint of condition-based systems health management. Differences with other techniques used in systems health management and philosophies of prognostics used in other domains will be shown. Examples relevant to micro grid systems and subsystems will be used to illustrate various types of prediction scenarios and the resources it take to set up a desired prognostic system. Specifically, the implementation results for power storage and power semiconductor components will demonstrate specific solution approaches of prognostics. The role of constituent elements of prognostics, such as model, prediction algorithms, failure threshold, run-to-failure data, requirements and specifications, and post-prognostic reasoning will be explained. A discussion on performance evaluation and performance metrics will conclude the technical discussion followed by general comments on open research problems and challenges in prognostics.

  3. Interactions between photodegradation components

    PubMed Central

    2012-01-01

    Background The interactions of p-cresol photocatalytic degradation components were studied by response surface methodology. The study was designed by central composite design using the irradiation time, pH, the amount of photocatalyst and the p-cresol concentration as variables. The design was performed to obtain photodegradation % as actual responses. The actual responses were fitted with linear, two factor interactions, cubic and quadratic model to select an appropriate model. The selected model was validated by analysis of variance which provided evidences such as high F-value (845.09), very low P-value (<.0.0001), non-significant lack of fit, the coefficient of R-squared (R2 = 0.999), adjusted R-squared (Radj2 = 0.998), predicted R-squared (Rpred2 = 0.994) and the adequate precision (95.94). Results From the validated model demonstrated that the component had interaction with irradiation time under 180 min of the time while the interaction with pH was above pH 9. Moreover, photocatalyst and p-cresol had interaction at minimal amount of photocatalyst (< 0.8 g/L) and 100 mg/L p-cresol. Conclusion These variables are interdependent and should be simultaneously considered during the photodegradation process, which is one of the advantages of the response surface methodology over the traditional laboratory method. PMID:22967885

  4. Laser generating metallic components

    NASA Astrophysics Data System (ADS)

    McLean, Marc A.; Shannon, G. J.; Steen, William M.

    1997-04-01

    Recent developments in rapid prototyping have led to the concept of laser generating, the first additive manufacturing technology. This paper presents an innovative process of depositing multi-layer tracks, by fusing successive powder tracks, to generate three dimensional components, thereby offering an alternative to casting for small metal component manufacture. A coaxial nozzle assembly has been designed and manufactured enabling consistent omni-directional multi-layer deposition. In conjunction with this the software route from a CAD drawing to machine code generation has been established. The part is manufactured on a six axes machining center incorporating a 1.8 kW carbon-dioxide laser, providing an integrated opto-mechanical workstation. The part build-up program is controlled by a P150 host computer, linked directly to the DNC machining center. The direct manufacturing route is shown, including initial examples of simple objects (primitives -- cube, cylinder, cone) leading to more complex turbine blade generation, incorporating build-up techniques and the associated mechanical properties.

  5. High-order random Raman lasing in a PM fiber with ultimate efficiency and narrow bandwidth.

    PubMed

    Babin, Sergey A; Zlobina, Ekaterina A; Kablukov, Sergey I; Podivilov, Evgeniy V

    2016-01-01

    Random Raman lasers attract now a great deal of attention as they operate in non-active turbid or transparent scattering media. In the last case, single mode fibers with feedback via Rayleigh backscattering generate a high-quality unidirectional laser beam. However, such fiber lasers have rather poor spectral and polarization properties, worsening with increasing power and Stokes order. Here we demonstrate a linearly-polarized cascaded random Raman lasing in a polarization-maintaining fiber. The quantum efficiency of converting the pump (1.05 μm) into the output radiation is almost independent of the Stokes order, amounting to 79%, 83%, and 77% for the 1(st) (1.11 μm), 2(nd) (1.17 μm) and 3(rd) (1.23 μm) order, respectively, at the polarization extinction ratio >22 dB for all orders. The laser bandwidth grows with increasing order, but it is almost independent of power in the 1-10 W range, amounting to ~1, ~2 and ~3 nm for orders 1-3, respectively. So, the random Raman laser exhibits no degradation of output characteristics with increasing Stokes order. A theory adequately describing the unique laser features has been developed. Thus, a full picture of the cascaded random Raman lasing in fibers is shown. PMID:26940082

  6. High-order random Raman lasing in a PM fiber with ultimate efficiency and narrow bandwidth

    PubMed Central

    Babin, Sergey A.; Zlobina, Ekaterina A.; Kablukov, Sergey I.; Podivilov, Evgeniy V.

    2016-01-01

    Random Raman lasers attract now a great deal of attention as they operate in non-active turbid or transparent scattering media. In the last case, single mode fibers with feedback via Rayleigh backscattering generate a high-quality unidirectional laser beam. However, such fiber lasers have rather poor spectral and polarization properties, worsening with increasing power and Stokes order. Here we demonstrate a linearly-polarized cascaded random Raman lasing in a polarization-maintaining fiber. The quantum efficiency of converting the pump (1.05 μm) into the output radiation is almost independent of the Stokes order, amounting to 79%, 83%, and 77% for the 1st (1.11 μm), 2nd (1.17 μm) and 3rd (1.23 μm) order, respectively, at the polarization extinction ratio >22 dB for all orders. The laser bandwidth grows with increasing order, but it is almost independent of power in the 1–10 W range, amounting to ~1, ~2 and ~3 nm for orders 1–3, respectively. So, the random Raman laser exhibits no degradation of output characteristics with increasing Stokes order. A theory adequately describing the unique laser features has been developed. Thus, a full picture of the cascaded random Raman lasing in fibers is shown. PMID:26940082

  7. Component model reduction via the projection and assembly method

    NASA Technical Reports Server (NTRS)

    Bernard, Douglas E.

    1989-01-01

    The problem of acquiring a simple but sufficiently accurate model of a dynamic system is made more difficult when the dynamic system of interest is a multibody system comprised of several components. A low order system model may be created by reducing the order of the component models and making use of various available multibody dynamics programs to assemble them into a system model. The difficulty is in choosing the reduced order component models to meet system level requirements. The projection and assembly method, proposed originally by Eke, solves this difficulty by forming the full order system model, performing model reduction at the the system level using system level requirements, and then projecting the desired modes onto the components for component level model reduction. The projection and assembly method is analyzed to show the conditions under which the desired modes are captured exactly; to the numerical precision of the algorithm.

  8. [Donation of blood components].

    PubMed

    Ladrón Llorente, Yolanda; Rández Alvero, Mónica; Carrascosa Ridruejo, Ana Isabel; Bregua García, Judith; Blanco Sotés, Carmelo; Calavia Lacarra, Jesús

    2004-06-01

    The donation of blood by means of aphaeresis by means of a cellular separator is a procedure through which one obtains blood components in the most efficient manner, yielding the best quality in the final product although this procedure requires special characteristics on behalf of the donor and consequently has a higher cost. The authors have analyzed the characteristics of 81 donors who used this procedure and who voluntarily came to our blood bank over a 17 month period from January 2002 until May 2003; 287 such procedures were carried out. The quality of the product obtained, as a benefit for the possible receptor, compensates the greater dedication by the donor and the high cost of this technique. PMID:15315098

  9. Economic components of grief.

    PubMed

    Corden, Anne; Hirst, Michael

    2013-09-01

    This article investigates the nature, context, and impact of economic stressors associated with loss, drawing on a mixed-methods study of changes in financial circumstances and economic roles following death of a life partner. Findings show how economic changes, and the practicalities of dealing with such transitions, shaped individual responses to the death. Perceived decline in financial wellbeing was associated with increased risk of poor psychological health following bereavement. The findings underline the theoretical importance of financial risk factors for anticipating the duration, pattern, and timing of bereavement outcomes. A challenge for service providers and professionals is how to bring understanding of economic components within emotional and practical support for people preparing for death and those who are bereaved. PMID:24521030

  10. Component failure data handbook

    SciTech Connect

    Gentillon, C.D.

    1991-04-01

    This report presents generic component failure rates that are used in reliability and risk studies of commercial nuclear power plants. The rates are computed using plant-specific data from published probabilistic risk assessments supplemented by selected other sources. Each data source is described. For rates with four or more separate estimates among the sources, plots show the data that are combined. The method for combining data from different sources is presented. The resulting aggregated rates are listed with upper bounds that reflect the variability observed in each rate across the nuclear power plant industry. Thus, the rates are generic. Both per hour and per demand rates are included. They may be used for screening in risk assessments or for forming distributions to be updated with plant-specific data.

  11. Hyaluronan: A Matrix Component

    NASA Astrophysics Data System (ADS)

    Rügheimer, Louise

    2008-09-01

    The glucosaminoglycan hyaluronan is a key component of the extracellular matrix. It is a large, negatively charged molecule that can act as an ion exchange reservoir for positive ions. Hyaluronan is involved in renomedullary water handling through its water-binding capacity. In the renal medulla, the main source for hyaluronan production is the renomedullary interstitial cells. Hyaluronan synthases are found in the inner part of the plasma membrane and polymerize hyaluronan chains which are extruded into the extracellular space. Hyaluronidases are a family of enzymes involved in the degradation of hyaluronan. They have a wide range of properties, including differences in size, inhibitor sensitivities, catalytic mechanisms, substrate specificities and pH optima.

  12. The Single Component Superinsulation

    NASA Astrophysics Data System (ADS)

    Getmanets, V. F.; Goncharenko, L. G.; Mikhalchenko, R. S.; Pershin, N. P.; Stears, H.

    Many up-to-date space and ground-based applications require a superinsulation characterized by low outgassing rate, minimal emission of particles and extremely low heat conductivity. All these qualities are featured by a single- component superinsulation blankets composed of metallized film-screens provided with small "dimples" and perforations of very specific size. Our team has optimized and produced material such as this as a result of a great number of multiple successful laboratory tests. We have characterized and documented all of the relevant parameters of such a superinsulation. We have also developed, manufactured and tested a machine intended for large- scale industrial production of "dimpled" and perforated superinsulation. Within this report are presented results of tests for the new superinsulation as related to cryovessels. Resultant data shows that this superinsulation type is the best appropriate one for outer space and terrestrial applications where maximum contamination concerns are present. Several US organizations are presently performing independent evaluation of our material.

  13. Sprayed skin turbine component

    DOEpatents

    Allen, David B

    2013-06-04

    Fabricating a turbine component (50) by casting a core structure (30), forming an array of pits (24) in an outer surface (32) of the core structure, depositing a transient liquid phase (TLP) material (40) on the outer surface of the core structure, the TLP containing a melting-point depressant, depositing a skin (42) on the outer surface of the core structure over the TLP material, and heating the assembly, thus forming both a diffusion bond and a mechanical interlock between the skin and the core structure. The heating diffuses the melting-point depressant away from the interface. Subsurface cooling channels (35) may be formed by forming grooves (34) in the outer surface of the core structure, filling the grooves with a fugitive filler (36), depositing and bonding the skin (42), then removing the fugitive material.

  14. Optical communication components

    NASA Astrophysics Data System (ADS)

    Eldada, Louay

    2004-03-01

    We review and contrast key technologies developed to address the optical components market for communication applications. We first review the component requirements from a network perspective. We then look at different material systems, compare their properties, and describe the functions achieved to date in each of them. The material systems reviewed include silica fiber, silica on silicon, silicon on insulator, silicon oxynitride, sol-gels, polymers, thin-film dielectrics, lithium niobate, indium phosphide, gallium arsenide, magneto-optic materials, and birefringent crystals. We then describe the most commonly used classes of optical device technology and present their pros and cons as well as the functions achieved to date in each of them. The technologies reviewed include passive, actuation, and active technologies. The passive technologies described include fused fibers, dispersion-compensating fiber, beam steering, Bragg gratings, diffraction gratings, holographic elements, thin-film filters, photonic crystals, microrings, and birefringent elements. The actuation technologies include thermo-optics, electro-optics, acousto-optics, magneto-optics, electroabsorption, liquid crystals, total internal reflection technologies, and mechanical actuation. The active technologies include heterostructures, quantum wells, rare-earth doping, dye doping, Raman amplification, and semiconductor amplification. We also investigate the use of different material systems and device technologies to achieve building-block functions, including lasers, amplifiers, detectors, modulators, polarization controllers, couplers, filters, switches, attenuators, isolators, circulators, wavelength converters, chromatic dispersion compensators, and polarization mode dispersion compensators. Some of the technologies presented are well established in the industry and in some cases have reached the commodity stage, others have recently become ready for commercial introduction, while some others

  15. Competing Orders and Anomalies.

    PubMed

    Moon, Eun-Gook

    2016-01-01

    A conservation law is one of the most fundamental properties in nature, but a certain class of conservation "laws" could be spoiled by intrinsic quantum mechanical effects, so-called quantum anomalies. Profound properties of the anomalies have deepened our understanding in quantum many body systems. Here, we investigate quantum anomaly effects in quantum phase transitions between competing orders and striking consequences of their presence. We explicitly calculate topological nature of anomalies of non-linear sigma models (NLSMs) with the Wess-Zumino-Witten (WZW) terms. The non-perturbative nature is directly related with the 't Hooft anomaly matching condition: anomalies are conserved in renormalization group flow. By applying the matching condition, we show massless excitations are enforced by the anomalies in a whole phase diagram in sharp contrast to the case of the Landau-Ginzburg-Wilson theory which only has massive excitations in symmetric phases. Furthermore, we find non-perturbative criteria to characterize quantum phase transitions between competing orders. For example, in 4D, we show the two competing order parameter theories, CP(1) and the NLSM with WZW, describe different universality class. Physical realizations and experimental implication of the anomalies are also discussed. PMID:27499184

  16. Audiotactile temporal order judgments.

    PubMed

    Zampini, Massimiliano; Brown, Timothy; Shore, David I; Maravita, Angelo; Röder, Brigitte; Spence, Charles

    2005-03-01

    We report a series of three experiments in which participants made unspeeded 'Which modality came first?' temporal order judgments (TOJs) to pairs of auditory and tactile stimuli presented at varying stimulus onset asynchronies (SOAs) using the method of constant stimuli. The stimuli were presented from either the same or different locations in order to explore the potential effect of redundant spatial information on audiotactile temporal perception. In Experiment 1, the auditory and tactile stimuli had to be separated by nearly 80 ms for inexperienced participants to be able to judge their temporal order accurately (i.e., for the just noticeable difference (JND) to be achieved), no matter whether the stimuli were presented from the same or different spatial positions. More experienced psychophysical observers (Experiment 2) also failed to show any effect of relative spatial position on audiotactile TOJ performance, despite having much lower JNDs (40 ms) overall. A similar pattern of results was found in Experiment 3 when silent electrocutaneous stimulation was used rather than vibrotactile stimulation. Thus, relative spatial position seems to be a less important factor in determining performance for audiotactile TOJ than for other modality pairings (e.g., audiovisual and visuotactile). PMID:15698825

  17. Competing Orders and Anomalies

    NASA Astrophysics Data System (ADS)

    Moon, Eun-Gook

    2016-08-01

    A conservation law is one of the most fundamental properties in nature, but a certain class of conservation “laws” could be spoiled by intrinsic quantum mechanical effects, so-called quantum anomalies. Profound properties of the anomalies have deepened our understanding in quantum many body systems. Here, we investigate quantum anomaly effects in quantum phase transitions between competing orders and striking consequences of their presence. We explicitly calculate topological nature of anomalies of non-linear sigma models (NLSMs) with the Wess-Zumino-Witten (WZW) terms. The non-perturbative nature is directly related with the ’t Hooft anomaly matching condition: anomalies are conserved in renormalization group flow. By applying the matching condition, we show massless excitations are enforced by the anomalies in a whole phase diagram in sharp contrast to the case of the Landau-Ginzburg-Wilson theory which only has massive excitations in symmetric phases. Furthermore, we find non-perturbative criteria to characterize quantum phase transitions between competing orders. For example, in 4D, we show the two competing order parameter theories, CP(1) and the NLSM with WZW, describe different universality class. Physical realizations and experimental implication of the anomalies are also discussed.

  18. Competing Orders and Anomalies

    PubMed Central

    Moon, Eun-Gook

    2016-01-01

    A conservation law is one of the most fundamental properties in nature, but a certain class of conservation “laws” could be spoiled by intrinsic quantum mechanical effects, so-called quantum anomalies. Profound properties of the anomalies have deepened our understanding in quantum many body systems. Here, we investigate quantum anomaly effects in quantum phase transitions between competing orders and striking consequences of their presence. We explicitly calculate topological nature of anomalies of non-linear sigma models (NLSMs) with the Wess-Zumino-Witten (WZW) terms. The non-perturbative nature is directly related with the ’t Hooft anomaly matching condition: anomalies are conserved in renormalization group flow. By applying the matching condition, we show massless excitations are enforced by the anomalies in a whole phase diagram in sharp contrast to the case of the Landau-Ginzburg-Wilson theory which only has massive excitations in symmetric phases. Furthermore, we find non-perturbative criteria to characterize quantum phase transitions between competing orders. For example, in 4D, we show the two competing order parameter theories, CP(1) and the NLSM with WZW, describe different universality class. Physical realizations and experimental implication of the anomalies are also discussed. PMID:27499184

  19. Feasibility of Higher-Order Differential Ion Mobility Separations Using New Asymmetric Waveforms

    PubMed Central

    Shvartsburg, Alexandre A.; Mashkevich, Stefan V.; Smith, Richard D.

    2011-01-01

    Technologies for separating and characterizing ions based on their transport properties in gases have been around for three decades. The early method of ion mobility spectrometry (IMS) distinguished ions by absolute mobility that depends on the collision cross section with buffer gas atoms. The more recent technique of field asymmetric waveform IMS (FAIMS) measures the difference between mobilities at high and low electric fields. Coupling IMS and FAIMS to soft ionization sources and mass spectrometry (MS) has greatly expanded their utility, enabling new applications in biomedical and nanomaterials research. Here, we show that time-dependent electric fields comprising more than two intensity levels could, in principle, effect an infinite number of distinct differential separations based on the higher-order terms of expression for ion mobility. These analyses could employ the hardware and operational procedures similar to those utilized in FAIMS. Methods up to the 4th or 5th order (where conventional IMS is 1st order and FAIMS is 2nd order) should be practical at field intensities accessible in ambient air, with still higher orders potentially achievable in insulating gases. Available experimental data suggest that higher-order separations should be largely orthogonal to each other and to FAIMS, IMS, and MS. PMID:16494377

  20. Ordering Interfluves: a Simple Proposal for Understanding Critical Zone Evolution and Function

    NASA Astrophysics Data System (ADS)

    Brecheisen, Z. S.; Richter, D., Jr.; Moon, S.; Halpin, P. N.

    2015-12-01

    A geomorphic interfluve ordering system, a reciprocal to the Hortonian-Strahler stream network order, is envisioned at the Calhoun Critical Zone Observatory (CCZO) in the South Carolina Piedmont. In this system the narrowest and most highly dissected interfluves (gentle ridges and hilltops) are 1st order and increase in rank dendritically through interfluve branching and broadening. Interfluve order attends to the structure, function, and management of residual porous-solid systems in the transport of water, solutes, and eroded solids in our deeply weathered (>30m soil/saprolite) critical zone. Recently generated geospatial data regarding the interactions of geomorphology, human land use, and forest ecology further strengthen the utility of this system. These upland networks and corresponding "land-sheds" have potential in linking recent work in the fields of geophysics and geomorphology regarding bedrock weathering front dynamics. Patterns of bedrock weathering depth, landcover & land-use change, and soil erosion are considered as they correspond to interfluve order. With LiDAR mapping and the burgeoning development and utilization of geophysical techniques and models enabling new quantitative research of critical zone landscape structure and function, many physiographic regions could benefit from a system that delineates and orders interfluve networks.

  1. Search for the First-Order Liquid-to-Liquid Phase Transition in Low-Temperature Confined Water by Neutron Scattering

    SciTech Connect

    Chen, Sow-Hsin; Wang, Zhe; Kolesnikov, Alexander I; Zhang, Yang; Liu, Kao-Hsiang

    2013-01-01

    It has been conjectured that a 1st order liquid-to-liquid (L-L) phase transition (LLPT) between high density liquid (HDL) and low density liquid (LDL) in supercooled water may exist, as a thermodynamic extension to the liquid phase of the 1st order transition established between the two bulk solid phases of amorphous ice, the high density amorphous ice (HDA) and the low density amorphous ice (LDA). In this paper, we first recall our previous attempts to establish the existence of the 1st order L-L phase transition through the use of two neutron scattering techniques: a constant Q elastic diffraction study of isobaric temperature scan of the D2O density, namely, the equation of state (EOS) measurements. A pronounced density hysteresis phenomenon in the temperature scan of the density above P = 1500 bar is observed which gives a plausible evidence of crossing the 1st order L-L phase transition line above this pressure; an incoherent quasi-elastic scattering measurements of temperature-dependence of the alpha-relaxation time of H2O at a series of pressures, namely, the study of the Fragile-to-Strong dynamic crossover (FSC) phenomenon as a function of pressure which we interpreted as the results of crossing the Widom line in the one-phase region. In this new experiment, we used incoherent inelastic neutron scattering (INS) to measure the density of states (DOS) of H atoms in H2O molecules in confined water as function of temperature and pressure, through which we may be able to follow the emergence of the LDL and HDL phases at supercooled temperature and high pressures. We here report for the first time the differences of librational and translational DOSs between the hypothetical HDL and LDL phases, which are similar to the corresponding differences between the well-established HDA and LDA ices. This is plausible evidence that the HDL and LDL phases are the thermodynamic extensions of the corresponding amorphous solid water HDA and LDA ices.

  2. Search for the first-order liquid-to-liquid phase transition in low-temperature confined water by neutron scattering

    NASA Astrophysics Data System (ADS)

    Chen, Sow-Hsin; Wang, Zhe; Kolesnikov, Alexander I.; Zhang, Yang; Liu, Kao-Hsiang

    2013-02-01

    It has been conjectured that a 1st order liquid-to-liquid (L-L) phase transition (LLPT) between high density liquid (HDL) and low density liquid (LDL) in supercooled water may exist, as a thermodynamic extension to the liquid phase of the 1st order transition established between the two bulk solid phases of amorphous ice, the high density amorphous ice (HDA) and the low density amorphous ice (LDA). In this paper, we first recall our previous attempts to establish the existence of the 1st order L-L phase transition through the use of two neutron scattering techniques: a constant Q elastic diffraction study of isobaric temperature scan of the D2O density, namely, the equation of state (EOS) measurements. A pronounced density hysteresis phenomenon in the temperature scan of the density above P = 1500 bar is observed which gives a plausible evidence of crossing the 1st order L-L phase transition line above this pressure; an incoherent quasi-elastic scattering measurements of temperature-dependence of the α-relaxation time of H2O at a series of pressures, namely, the study of the Fragile-to-Strong dynamic crossover (FSC) phenomenon as a function of pressure which we interpreted as the results of crossing the Widom line in the one-phase region. In this new experiment, we used incoherent inelastic neutron scattering (INS) to measure the density of states (DOS) of H atoms in H2O molecules in confined water as function of temperature and pressure, through which we may be able to follow the emergence of the LDL and HDL phases at supercooled temperature and high pressures. We here report for the first time the differences of librational and translational DOSs between the hypothetical HDL and LDL phases, which are similar to the corresponding differences between the well-established HDA and LDA ices. This is plausible evidence that the HDL and LDL phases are the thermodynamic extensions of the corresponding amorphous solid water HDA and LDA ices.

  3. CO component estimation based on the independent component analysis

    SciTech Connect

    Ichiki, Kiyotomo; Kaji, Ryohei; Yamamoto, Hiroaki; Takeuchi, Tsutomu T.; Fukui, Yasuo

    2014-01-01

    Fast Independent Component Analysis (FastICA) is a component separation algorithm based on the levels of non-Gaussianity. Here we apply FastICA to the component separation problem of the microwave background, including carbon monoxide (CO) line emissions that are found to contaminate the PLANCK High Frequency Instrument (HFI) data. Specifically, we prepare 100 GHz, 143 GHz, and 217 GHz mock microwave sky maps, which include galactic thermal dust, NANTEN CO line, and the cosmic microwave background (CMB) emissions, and then estimate the independent components based on the kurtosis. We find that FastICA can successfully estimate the CO component as the first independent component in our deflection algorithm because its distribution has the largest degree of non-Gaussianity among the components. Thus, FastICA can be a promising technique to extract CO-like components without prior assumptions about their distributions and frequency dependences.

  4. Three components of 'Taurids'

    NASA Astrophysics Data System (ADS)

    Koseki, Masahiro

    2012-08-01

    Observations and the estimated activity profile both show the 'Taurids' are not a single entity but consist of three showers. It is necessary to study ecliptic streams such as 'Taurids' very carefully, because they are located near the ANT area, where sporadic or minor activities continue the whole year round. Nevertheless, photographic and CCD observations show a clear dip in the activity against the background and further analysis permits the discrimination of three components at the following solar longitudes and with the following radiants and geocentric velocities: SE activity (36.5 deg, +98 deg) Vgeo 28.6, mean solar longitude 202.6 deg SF activity (53.0 deg, +139 deg) Vgeo 27.0, mean solar longitude 223.4 deg Northern activity (55.5 deg, +213 deg) Vgeo 28.7, mean solar longitude 226.3 deg Observations might suggest other weaker activities exist but they are buried in the background activity. It is said that the 'Taurid' activity interval may extend from September to December, but the observations and analysis presented here argue against a single stream and in favor of a mixture of three independent streams and sporadic activities.

  5. Initial Ada components evaluation

    NASA Technical Reports Server (NTRS)

    Moebes, Travis

    1989-01-01

    The SAIC has the responsibility for independent test and validation of the SSE. They have been using a mathematical functions library package implemented in Ada to test the SSE IV and V process. The library package consists of elementary mathematical functions and is both machine and accuracy independent. The SSE Ada components evaluation includes code complexity metrics based on Halstead's software science metrics and McCabe's measure of cyclomatic complexity. Halstead's metrics are based on the number of operators and operands on a logical unit of code and are compiled from the number of distinct operators, distinct operands, and total number of occurrences of operators and operands. These metrics give an indication of the physical size of a program in terms of operators and operands and are used diagnostically to point to potential problems. McCabe's Cyclomatic Complexity Metrics (CCM) are compiled from flow charts transformed to equivalent directed graphs. The CCM is a measure of the total number of linearly independent paths through the code's control structure. These metrics were computed for the Ada mathematical functions library using Software Automated Verification and Validation (SAVVAS), the SSE IV and V tool. A table with selected results was shown, indicating that most of these routines are of good quality. Thresholds for the Halstead measures indicate poor quality if the length metric exceeds 260 or difficulty is greater than 190. The McCabe CCM indicated a high quality of software products.

  6. Filter Component Assessment

    SciTech Connect

    Alvin, M.A.; Lippert, T.E.; Diaz, E.S.; Smeltzer, E.E.

    1996-12-31

    Advanced particulate filtration systems are currently being developed at Westinghouse for use in both coal-fired Integrated Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) systems. To date, Westinghouse has demonstrated 5855 hours of successful operation of first generation monolithic filter elements in PFBC applications when ash bridging or process thermal transient excursions are avoided. Alternate advanced monolithic and second generation fiber reinforced, filament wound and vacuum infiltrated filters are also being developed which are considered to have enhanced high temperature creep resistance, improved fracture toughness, or enhanced thermal shock characteristics, respectively. Mechanical and component fabrication improvements, as well as degradation mechanisms for each filter element have been identified by Westinghouse during exposure to simulated PFBC operating conditions and alkali-containing steam/air environments. Additional effort is currently being focused on determining the stability of the advanced monolithic high temperature creep resistant clay bonded silicon carbide (SiC) materials, alumina/mullite, and chemically vapor infiltrated (CVI) SiC materials during operation in the Westinghouse Advanced Particulate Filtration (W-APF) system at Foster Wheeler`s pressurized circulating fluidized-bed combustion (PCFBC) test facility in Karhula, Finland. Select advanced filter materials are being defined for additional long-term exposure in integrated gasification combined cycle (IGCC) gas streams. The results of these efforts are summarized in this paper. 6 refs., 7 figs., 11 tabs.

  7. Localization protected quantum order

    NASA Astrophysics Data System (ADS)

    Nandkishore, Rahul

    2015-03-01

    Many body localization occurs in isolated quantum systems, usually with strong disorder, and is marked by absence of dissipation, absence of thermal equilibration, and a memory of the initial conditions that survives in local observables for arbitrarily long times. The many body localized regime is a non-equilibrium, strongly disordered, non-self averaging regime that presents a new frontier for quantum statistical mechanics. In this talk, I point out that there exists a vast zoo of correlated many body localized states of matter, which may be classified using familiar notions of spontaneous symmetry breaking and topological order. I will point out that in the many body localized regime, spontaneous symmetry breaking can occur even at high energy densities in one dimensional systems, and topological order can occur even without a bulk gap. I will also discuss the phenomenology of imperfectly isolated many body localized systems, which are weakly coupled to a heat bath. I will conclude with a brief discussion of how these phenomena may best be detected in experiments. Collaborators: David Huse, S.L. Sondhi, Arijeet Pal, Vadim Oganesyan, A.C. Potter, Sarang Gopalakrishnan, S. Johri, R.N. Bhatt.

  8. Fractional order junctions

    NASA Astrophysics Data System (ADS)

    Machado, J. Tenreiro

    2015-01-01

    Gottfried Leibniz generalized the derivation and integration, extending the operators from integer up to real, or even complex, orders. It is presently recognized that the resulting models capture long term memory effects difficult to describe by classical tools. Leon Chua generalized the set of lumped electrical elements that provide the building blocks in mathematical models. His proposal of the memristor and of higher order elements broadened the scope of variables and relationships embedded in the development of models. This paper follows the two directions and proposes a new logical step, by generalizing the concept of junction. Classical junctions interconnect system elements using simple algebraic restrictions. Nevertheless, this simplistic approach may be misleading in the presence of unexpected dynamical phenomena and requires including additional "parasitic" elements. The novel γ -junction includes, as special cases, the standard series and parallel connections and allows a new degree of freedom when building models. The proposal motivates the search for experimental and real world manifestations of the abstract conjectures.

  9. Hybrid N-order Lagrangian interpolation Eulerian-Lagrangian method for salinity calculation

    NASA Astrophysics Data System (ADS)

    Wu, Yan-cheng; Zhu, Shou-xian; Zhou, Lin; You, Xiao-bao; Zhang, Wen-jing

    2016-04-01

    The Eulerian-Lagrangian method (ELM) has been used by many ocean models as the solution of the advection equation, but the numerical error caused by interpolation imposes restriction on its accuracy. In the present study, hybrid N-order Lagrangian interpolation ELM (LiELM) is put forward in which the N-order Lagrangian interpolation is used at first, then the lower order Lagrangian interpolation is applied in the points where the interpolation results are abnormally higher or lower. The calculation results of a step-shaped salinity advection model are analyzed, which show that higher order ( N=3-8) LiELM can reduce the mean numerical error of salinity calculation, but the numerical oscillation error is still significant. Even number order LiELM makes larger numerical oscillation error than its adjacent odd number order LiELM. Hybrid N-order LiELM can remove numerical oscillation, and it significantly reduces the mean numerical error when N is even and the current is in fixed direction, while it makes less effect on mean numerical error when N is odd or the current direction changes periodically. Hybrid odd number order LiELM makes less mean numerical error than its adjacent even number order LiELM when the current is in the fixed direction, while the mean numerical error decreases as N increases when the current direction changes periodically, so odd number of N may be better for application. Among various types of Hybrid N-order LiELM, the scheme reducing N-order directly to 1st-order may be the optimal for synthetic selection of accuracy and computational efficiency.

  10. 2014 Female Athlete Triad Coalition consensus statement on treatment and return to play of the female athlete triad: 1st International Conference held in San Francisco, CA, May 2012, and 2nd International Conference held in Indianapolis, IN, May 2013.

    PubMed

    De Souza, Mary Jane; Nattiv, Aurelia; Joy, Elizabeth; Misra, Madhusmita; Williams, Nancy I; Mallinson, Rebecca J; Gibbs, Jenna C; Olmsted, Marion; Goolsby, Marci; Matheson, Gordon

    2014-03-01

    The Female Athlete Triad is a medical condition often observed in physically active girls and women, and involves 3 components: (1) low energy availability with or without disordered eating, (2) menstrual dysfunction, and (3) low bone mineral density. Female athletes often present with 1 or more of the 3 Triad components, and an early intervention is essential to prevent its progression to serious endpoints that include clinical eating disorders, amenorrhea, and osteoporosis. This consensus statement represents a set of recommendations developed following the first (San Francisco, California) and second (Indianapolis, Indianna) International Symposia on the Female Athlete Triad. It is intended to provide clinical guidelines for physicians, athletic trainers, and other health care providers for the screening, diagnosis, and treatment of the Female Athlete Triad and to provide clear recommendations for return to play. The 2014 Female Athlete Triad Coalition Consensus Statement on Treatment and Return to Play of the Female Athlete Triad Expert Panel has proposed a risk stratification point system that takes into account magnitude of risk to assist the physician in decision-making regarding sport participation, clearance, and return to play. Guidelines are offered for clearance categories, management by a multidisciplinary team, and implementation of treatment contracts. This consensus paper has been endorsed by The Female Athlete Triad Coalition, an International Consortium of leading Triad researchers, physicians, and other health care professionals, the American College of Sports Medicine, and the American Medical Society for Sports Medicine. PMID:24569429

  11. Component external leakage and rupture frequency estimates

    SciTech Connect

    Eide, S.A.; Khericha, S.T.; Calley, M.B.; Johnson, D.A.; Marteeny, M.L.

    1991-11-01

    In order to perform detailed internal flooding risk analyses of nuclear power plants, external leakage and rupture frequencies are needed for various types of components - piping, valves, pumps, flanges, and others. However, there appears to be no up-to-date, comprehensive source for such frequency estimates. This report attempts to fill that void. Based on a comprehensive search of Licensee Event Reports (LERs) contained in Nuclear Power Experience (NPE), and estimates of component populations and exposure times, component external leakage and rupture frequencies were generated. The remainder of this report covers the specifies of the NPE search for external leakage and rupture events, analysis of the data, a comparison with frequency estimates from other sources, and a discussion of the results.

  12. Component evaluation testing and analysis algorithms.

    SciTech Connect

    Hart, Darren M.; Merchant, Bion John

    2011-10-01

    The Ground-Based Monitoring R&E Component Evaluation project performs testing on the hardware components that make up Seismic and Infrasound monitoring systems. The majority of the testing is focused on the Digital Waveform Recorder (DWR), Seismic Sensor, and Infrasound Sensor. In order to guarantee consistency, traceability, and visibility into the results of the testing process, it is necessary to document the test and analysis procedures that are in place. Other reports document the testing procedures that are in place (Kromer, 2007). This document serves to provide a comprehensive overview of the analysis and the algorithms that are applied to the Component Evaluation testing. A brief summary of each test is included to provide the context for the analysis that is to be performed.

  13. Component placement optimization in the brain.

    PubMed

    Cherniak, C

    1994-04-01

    This computational neuroanatomy study evaluates how well some formalisms derived from combinatorial network optimization theory fit as models for brain structure. At multiple hierarchical levels--brain, ganglion, individual cell--physical placement of neural components appears consistent with a single, simple goal: minimize cost of connections among the components. The most dramatic instance of this "save wire" organizing principle is reported for adjacencies among ganglia in the nematode nervous system; among about 40,000,000 alternative layout orderings, the actual ganglion placement in fact requires the least total connection length. In addition, evidence supports a component placement optimization hypothesis for positioning of individual neurons in the nematode, and also for positioning of mammalian cortical areas. PMID:8158278

  14. Notch Signaling Components

    PubMed Central

    Liu, Zhi-Yan; Wu, Tao; Li, Qing; Wang, Min-Cong; Jing, Li; Ruan, Zhi-Ping; Yao, Yu; Nan, Ke-Jun; Guo, Hui

    2016-01-01

    Abstract Non-small-cell lung cancer (NSCLC) is a lethal and aggressive malignancy. Currently, the identities of prognostic and predictive makers of NSCLC have not been fully established. Dysregulated Notch signaling has been implicated in many human malignancies, including NSCLC. However, the prognostic value of measuring Notch signaling and the utility of developing Notch-targeted therapies in NSCLC remain inconclusive. The present study investigated the association of individual Notch receptor and ligand levels with lung adenocarcinoma (ADC) and squamous cell carcinoma (SCC) prognosis using the Kaplan-Meier plotte database. This online database encompasses 2437 lung cancer samples. Hazard ratios with 95% confidence intervals were calculated. The results showed that higher Notch1, Notch2, JAG1, and DLL1 mRNA expression predicted better overall survival (OS) in lung ADC, but showed no significance in SCC patients. Elevated Notch3, JAG2, and DLL3 mRNA expression was associated with poor OS of ADC patients, but not in SCC patients. There was no association between Notch4 and OS in either lung ADC or SCC patients. In conclusion, the set of Notch1, Notch2, JAG1, DLL1 and that of Notch3, JAG2, DLL3 played opposing prognostic roles in lung ADC patients. Neither set of Notch receptors and ligands was indicative of lung SCC prognosis. Notch signaling could serve as promising marker to predict outcomes in lung ADC patients. The distinct features of lung cancer subtypes and Notch components should be considered when developing future Notch-targeted therapies. PMID:27196489

  15. GOATS - Orbitology Component

    NASA Technical Reports Server (NTRS)

    Haber, Benjamin M.; Green, Joseph J.

    2010-01-01

    The GOATS Orbitology Component software was developed to specifically address the concerns presented by orbit analysis tools that are often written as stand-alone applications. These applications do not easily interface with standard JPL first-principles analysis tools, and have a steep learning curve due to their complicated nature. This toolset is written as a series of MATLAB functions, allowing seamless integration into existing JPL optical systems engineering modeling and analysis modules. The functions are completely open, and allow for advanced users to delve into and modify the underlying physics being modeled. Additionally, this software module fills an analysis gap, allowing for quick, high-level mission analysis trades without the need for detailed and complicated orbit analysis using commercial stand-alone tools. This software consists of a series of MATLAB functions to provide for geometric orbit-related analysis. This includes propagation of orbits to varying levels of generalization. In the simplest case, geosynchronous orbits can be modeled by specifying a subset of three orbit elements. The next case is a circular orbit, which can be specified by a subset of four orbit elements. The most general case is an arbitrary elliptical orbit specified by all six orbit elements. These orbits are all solved geometrically, under the basic problem of an object in circular (or elliptical) orbit around a rotating spheroid. The orbit functions output time series ground tracks, which serve as the basis for more detailed orbit analysis. This software module also includes functions to track the positions of the Sun, Moon, and arbitrary celestial bodies specified by right ascension and declination. Also included are functions to calculate line-of-sight geometries to ground-based targets, angular rotations and decompositions, and other line-of-site calculations. The toolset allows for the rapid execution of orbit trade studies at the level of detail required for the

  16. Definition of Contravariant Velocity Components

    NASA Technical Reports Server (NTRS)

    Hung, Ching-moa; Kwak, Dochan (Technical Monitor)

    2002-01-01

    In this paper we have reviewed the basics of tensor analysis in an attempt to clarify some misconceptions regarding contravariant and covariant vector components as used in fluid dynamics. We have indicated that contravariant components are components of a given vector expressed as a unique combination of the covariant base vector system and, vice versa, that the covariant components are components of a vector expressed with the contravariant base vector system. Mathematically, expressing a vector with a combination of base vector is a decomposition process for a specific base vector system. Hence, the contravariant velocity components are decomposed components of velocity vector along the directions of coordinate lines, with respect to the covariant base vector system. However, the contravariant (and covariant) components are not physical quantities. Their magnitudes and dimensions are controlled by their corresponding covariant (and contravariant) base vectors.

  17. Birth order and myopia

    PubMed Central

    Guggenheim, Jeremy A.; McMahon, George; Northstone, Kate; Mandel, Yossi; Kaiserman, Igor; Stone, Richard A.; Lin, Xiaoyu; Saw, Seang Mei; Forward, Hannah; Mackey, David A.; Yazar, Seyhan; Young, Terri L.; Williams, Cathy

    2013-01-01

    Purpose An association between birth order and reduced unaided vision (a surrogate for myopia) has been observed previously. We examined the association between birth order and myopia directly in 4 subject groups. Methods Subject groups were participants in 1) the Avon Longitudinal Study of Parents and Children (ALSPAC; UK; age 15 years; N=4,401), 2) the Singapore Cohort Study of Risk Factors for Myopia (SCORM; Singapore; age 13 years; N=1,959), 3) the Raine Eye Health Study (REHS; Australia; age 20 years; N=1,344), and 4) Israeli Defense Force recruitment candidates (IDFC; Israel; age 16-22 years; N=888,277). Main outcome: Odds ratio (OR) for myopia in first born versus non-first born individuals after adjusting for potential risk factors. Results The prevalence of myopia was numerically higher in first-born versus non-first-born individuals in all study groups, but the strength of evidence varied widely. The adjusted ORs (95% CI) were: ALSPAC, 1.31 (1.05-1.64); SCORM, 1.25 (0.89-1.77); REHS, 1.18 (0.90-1.55); IDFC, 1.04 (1.03-1.06). In the large IDFC sample, the effect size was greater (a) for the first born versus fourth or higher born comparison than for the first born versus second/third born comparison (P<0.001) and (b) with increasing myopia severity (P<0.001). Conclusions Across all studies, the increased risk of myopia in first born individuals was low (OR <1.3). Indeed, only the studies with >4000 participants provided strong statistical support for the association. The available evidence suggested the relationship was independent of established risk factors such as time outdoors/reading, and thus may arise through a different causal mechanism. PMID:24168726

  18. Order without design.

    PubMed

    Kurakin, Alexei

    2010-01-01

    Experimental reality in molecular and cell biology, as revealed by advanced research technologies and methods, is manifestly inconsistent with the design perspective on the cell, thus creating an apparent paradox: where do order and reproducibility in living systems come from if not from design? I suggest that the very idea of biological design (whether evolutionary or intelligent) is a misconception rooted in the time-honored and thus understandably precious error of interpreting living systems/organizations in terms of classical mechanics and equilibrium thermodynamics. This error, introduced by the founders and perpetuated due to institutionalization of science, is responsible for the majority of inconsistencies, contradictions, and absurdities plaguing modern sciences, including one of the most startling paradoxes - although almost everyone agrees that any living organization is an open nonequilibrium system of continuous energy/matter flow, almost everyone interprets and models living systems/organizations in terms of classical mechanics, equilibrium thermodynamics, and engineering, i.e., in terms and concepts that are fundamentally incompatible with the physics of life. The reinterpretation of biomolecules, cells, organisms, ecosystems, and societies in terms of open nonequilibrium organizations of energy/matter flow suggests that, in the domain of life, order and reproducibility do not come from design. Instead, they are natural and inevitable outcomes of self-organizing activities of evolutionary successful, and thus persistent, organizations co-evolving on multiple spatiotemporal scales as biomolecules, cells, organisms, ecosystems, and societies. The process of self-organization on all scales is driven by economic competition, obeys empirical laws of nonequilibrium thermodynamics, and is facilitated and, thus, accelerated by memories of living experience persisting in the form of evolutionary successful living organizations and their constituents. PMID

  19. Order without design

    PubMed Central

    2010-01-01

    Experimental reality in molecular and cell biology, as revealed by advanced research technologies and methods, is manifestly inconsistent with the design perspective on the cell, thus creating an apparent paradox: where do order and reproducibility in living systems come from if not from design? I suggest that the very idea of biological design (whether evolutionary or intelligent) is a misconception rooted in the time-honored and thus understandably precious error of interpreting living systems/organizations in terms of classical mechanics and equilibrium thermodynamics. This error, introduced by the founders and perpetuated due to institutionalization of science, is responsible for the majority of inconsistencies, contradictions, and absurdities plaguing modern sciences, including one of the most startling paradoxes - although almost everyone agrees that any living organization is an open nonequilibrium system of continuous energy/matter flow, almost everyone interprets and models living systems/organizations in terms of classical mechanics, equilibrium thermodynamics, and engineering, i.e., in terms and concepts that are fundamentally incompatible with the physics of life. The reinterpretation of biomolecules, cells, organisms, ecosystems, and societies in terms of open nonequilibrium organizations of energy/matter flow suggests that, in the domain of life, order and reproducibility do not come from design. Instead, they are natural and inevitable outcomes of self-organizing activities of evolutionary successful, and thus persistent, organizations co-evolving on multiple spatiotemporal scales as biomolecules, cells, organisms, ecosystems, and societies. The process of self-organization on all scales is driven by economic competition, obeys empirical laws of nonequilibrium thermodynamics, and is facilitated and, thus, accelerated by memories of living experience persisting in the form of evolutionary successful living organizations and their constituents. PMID

  20. IT Infrastructure Components for Biobanking

    PubMed Central

    Prokosch, H.U.; Beck, A.; Ganslandt, T.; Hummel, M.; Kiehntopf, M.; Sax, U.; Ückert, F.; Semler, S.

    2010-01-01

    Objective Within translational research projects in the recent years large biobanks have been established, mostly supported by homegrown, proprietary software solutions. No general requirements for biobanking IT infrastructures have been published yet. This paper presents an exemplary biobanking IT architecture, a requirements specification for a biorepository management tool and exemplary illustrations of three major types of requirements. Methods We have pursued a comprehensive literature review for biobanking IT solutions and established an interdisciplinary expert panel for creating the requirements specification. The exemplary illustrations were derived from a requirements analysis within two university hospitals. Results The requirements specification comprises a catalog with more than 130 detailed requirements grouped into 3 major categories and 20 subcategories. Special attention is given to multitenancy capabilities in order to support the project-specific definition of varying research and bio-banking contexts, the definition of workflows to track sample processing, sample transportation and sample storage and the automated integration of preanalytic handling and storage robots. Conclusion IT support for biobanking projects can be based on a federated architectural framework comprising primary data sources for clinical annotations, a pseudonymization service, a clinical data warehouse with a flexible and user-friendly query interface and a biorepository management system. Flexibility and scalability of all such components are vital since large medical facilities such as university hospitals will have to support biobanking for varying monocentric and multicentric research scenarios and multiple medical clients. PMID:23616851

  1. 40 CFR 305.27 - Accelerated order, order to dismiss.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 28 2014-07-01 2014-07-01 false Accelerated order, order to dismiss... Prehearing Procedures § 305.27 Accelerated order, order to dismiss. (a) General. The Presiding Officer, upon motion of any party or sua sponte, may at any time render an accelerated order in favor of the...

  2. Cooling system for electronic components

    DOEpatents

    Anderl, William James; Colgan, Evan George; Gerken, James Dorance; Marroquin, Christopher Michael; Tian, Shurong

    2016-05-17

    Embodiments of the present invention provide for non interruptive fluid cooling of an electronic enclosure. One or more electronic component packages may be removable from a circuit card having a fluid flow system. When installed, the electronic component packages are coincident to and in a thermal relationship with the fluid flow system. If a particular electronic component package becomes non-functional, it may be removed from the electronic enclosure without affecting either the fluid flow system or other neighboring electronic component packages.

  3. Cooling system for electronic components

    SciTech Connect

    Anderl, William James; Colgan, Evan George; Gerken, James Dorance; Marroquin, Christopher Michael; Tian, Shurong

    2015-12-15

    Embodiments of the present invention provide for non interruptive fluid cooling of an electronic enclosure. One or more electronic component packages may be removable from a circuit card having a fluid flow system. When installed, the electronic component packages are coincident to and in a thermal relationship with the fluid flow system. If a particular electronic component package becomes non-functional, it may be removed from the electronic enclosure without affecting either the fluid flow system or other neighboring electronic component packages.

  4. Ordered transport and identification of particles

    DOEpatents

    Shera, E. Brooks

    1993-01-01

    A method and apparatus are provided for application of electrical field gradients to induce particle velocities to enable particle sequence and identification information to be obtained. Particle sequence is maintained by providing electroosmotic flow for an electrolytic solution in a particle transport tube. The transport tube and electrolytic solution are selected to provide an electroosmotic radius of >100 so that a plug flow profile is obtained for the electrolytic solution in the transport tube. Thus, particles are maintained in the same order in which they are introduced in the transport tube. When the particles also have known electrophoretic velocities, the field gradients introduce an electrophoretic velocity component onto the electroosmotic velocity. The time that the particles pass selected locations along the transport tube may then be detected and the electrophoretic velocity component calculated for particle identification. One particular application is the ordered transport and identification of labeled nucleotides sequentially cleaved from a strand of DNA.

  5. Ordered transport and identification of particles

    DOEpatents

    Shera, E.B.

    1993-05-11

    A method and apparatus are provided for application of electrical field gradients to induce particle velocities to enable particle sequence and identification information to be obtained. Particle sequence is maintained by providing electroosmotic flow for an electrolytic solution in a particle transport tube. The transport tube and electrolytic solution are selected to provide an electroosmotic radius of >100 so that a plug flow profile is obtained for the electrolytic solution in the transport tube. Thus, particles are maintained in the same order in which they are introduced in the transport tube. When the particles also have known electrophoretic velocities, the field gradients introduce an electrophoretic velocity component onto the electroosmotic velocity. The time that the particles pass selected locations along the transport tube may then be detected and the electrophoretic velocity component calculated for particle identification. One particular application is the ordered transport and identification of labeled nucleotides sequentially cleaved from a strand of DNA.

  6. Higher order diffractions from a circular disk

    NASA Technical Reports Server (NTRS)

    Marsland, Diane P.; Balanis, Constantine A.; Brumley, Stephen A.

    1987-01-01

    The backscattering from a circular disk is analyzed using the geometrical theory of diffraction. First-, second-, and third-order diffractions are included in the hard polarization analysis, while first-, second-, and third-order slope diffractions are included for soft polarization. Improvements in the prediction of the monostatic radar cross section over previous works are noted. For hard polarization, an excellent agreement is exhibited between experimental and theoretical results, while a very good agreement is noted for soft polarization. To further improve the soft polarization results for wide angles, a model for the creeping wave or circulating current on the edge of the disk is obtained and used to find an additional component of the backscattered field. The addition of this component significantly improves the results for wide angles, leading to excellent agreement for soft polarization also. An axial-caustic correction method using equivalent currents is also included in the analysis.

  7. 48 CFR 53.216-1 - Delivery orders and orders under basic ordering agreements (OF 347).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... under basic ordering agreements (OF 347). 53.216-1 Section 53.216-1 Federal Acquisition Regulations... Delivery orders and orders under basic ordering agreements (OF 347). OF 347, Order for Supplies or Services. OF 347, prescribed in 53.213(f), (or an approved agency form) may be used to place orders...

  8. National Forum on the Future of Automated Materials Processing in US Industry: The Role of Sensors. Report of a workshop (1st) held at Santa Barbara, California on December 16-17, 1985

    NASA Astrophysics Data System (ADS)

    Yolken, H. T.; Mehrabian, R.

    1985-12-01

    These are the proceedings of the workshop A National Forum on the Future of Automated Materials Processing in U.S. Industry - The Role of Sensors. This is the first of two workshops to be sponsored by the Industrial Research Institute and the White House Office of Science and Technology Policy, Committee on Materials Working Group on Automation of Materials Processing. The second workshop will address the other two key components required for automated materials processing, process models and artificial intelligence coupled with computer integration of the system. The objective of these workshops is to identify and assess important issues afecting the competitive position of U.S. industry related to its ability to automate production processes for basic and advanced materials and to develop approaches for improved capability through cooperative R&D and associated efforts.

  9. Components of Swarm Intelligence

    SciTech Connect

    David Bruemmer; Donald Dudenhoeffer; Matthew Anderson; Mark McKay

    2004-03-01

    This paper discusses the successes and failures over the past three years as efforts at the Idaho National Engineering and Environmental Laboratory (INEEL) have developed and evaluated robot behaviors that promote the emergence of swarm intelligence. Using a team of 12 small robots with the ability to respond to light and sound, the INEEL has investigated the fundamental advantages of swarm behavior as well as the limitations of this approach. The paper discusses the ways in which biology has inspired this work and the ways in which adherence to the biological model has proven to be both a benefit and hindrance to developing a fieldable system. The paper outlines how a hierarchical command and control structure can be imposed in order to permit human control at a level of group abstraction and discusses experimental results that show how group performance scales as different numbers of robots are utilized. Lastly, the paper outlines the applications for which the resulting capabilities have been applied and demonstrated.

  10. Advanced ordered intermetallic alloy deployment

    SciTech Connect

    Liu, C.T.; Maziasz, P.J.; Easton, D.S.

    1997-04-01

    The need for high-strength, high-temperature, and light-weight materials for structural applications has generated a great deal of interest in ordered intermetallic alloys, particularly in {gamma}-based titanium aluminides {gamma}-based TiAl alloys offer an attractive mix of low density ({approximately}4g/cm{sup 3}), good creep resistance, and high-temperature strength and oxidation resistance. For rotating or high-speed components. TiAl also has a high damping coefficient which minimizes vibrations and noise. These alloys generally contain two phases. {alpha}{sub 2} (DO{sub 19} structure) and {gamma} (L 1{sub 0}), at temperatures below 1120{degrees}C, the euticoid temperature. The mechanical properties of TiAl-based alloys are sensitive to both alloy compositions and microstructure. Depending on heat-treatment and thermomechanical processing, microstructures with near equiaxed {gamma}, a duplex structure (a mix of the {gamma} and {alpha}{sub 2} phases) can be developed in TiAl alloys containing 45 to 50 at. % Al. The major concern for structural use of TiAl alloys is their low ductility and poor fracture resistance at ambient temperatures. The purpose of this project is to improve the fracture toughness of TiAl-based alloys by controlling alloy composition, microstructure and thermomechanical treatment. This work is expected to lead to the development of TiAl alloys with significantly improved fracture toughness and tensile ductility for structural use.

  11. The solvent component of macromolecular crystals

    PubMed Central

    Weichenberger, Christian X.; Afonine, Pavel V.; Kantardjieff, Katherine; Rupp, Bernhard

    2015-01-01

    The mother liquor from which a biomolecular crystal is grown will contain water, buffer molecules, native ligands and cofactors, crystallization precipitants and additives, various metal ions, and often small-molecule ligands or inhibitors. On average, about half the volume of a biomolecular crystal consists of this mother liquor, whose components form the disordered bulk solvent. Its scattering contributions can be exploited in initial phasing and must be included in crystal structure refinement as a bulk-solvent model. Concomitantly, distinct electron density originating from ordered solvent components must be correctly identified and represented as part of the atomic crystal structure model. Herein, are reviewed (i) probabilistic bulk-solvent content estimates, (ii) the use of bulk-solvent density modification in phase improvement, (iii) bulk-solvent models and refinement of bulk-solvent contributions and (iv) modelling and validation of ordered solvent constituents. A brief summary is provided of current tools for bulk-solvent analysis and refinement, as well as of modelling, refinement and analysis of ordered solvent components, including small-molecule ligands. PMID:25945568

  12. The solvent component of macromolecular crystals.

    PubMed

    Weichenberger, Christian X; Afonine, Pavel V; Kantardjieff, Katherine; Rupp, Bernhard

    2015-05-01

    The mother liquor from which a biomolecular crystal is grown will contain water, buffer molecules, native ligands and cofactors, crystallization precipitants and additives, various metal ions, and often small-molecule ligands or inhibitors. On average, about half the volume of a biomolecular crystal consists of this mother liquor, whose components form the disordered bulk solvent. Its scattering contributions can be exploited in initial phasing and must be included in crystal structure refinement as a bulk-solvent model. Concomitantly, distinct electron density originating from ordered solvent components must be correctly identified and represented as part of the atomic crystal structure model. Herein, are reviewed (i) probabilistic bulk-solvent content estimates, (ii) the use of bulk-solvent density modification in phase improvement, (iii) bulk-solvent models and refinement of bulk-solvent contributions and (iv) modelling and validation of ordered solvent constituents. A brief summary is provided of current tools for bulk-solvent analysis and refinement, as well as of modelling, refinement and analysis of ordered solvent components, including small-molecule ligands. PMID:25945568

  13. 78 FR 54234 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Advance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-03

    ..., 63 FR 18871 (April 16, 1998). The Notice of Initiation of Five-Year (``Sunset'') Reviews provides.... Lightweight Thermal Paper from China (A-570-920) David Goldberger (202) (1st Review). 482-4136. Lightweight.... Countervailing Duty Proceedings Lightweight Thermal Paper from China (1st David Goldberger (202) Review)...

  14. 78 FR 13857 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Advance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-01

    ...; Policy Bulletin, 63 FR 18871 (April 16, 1998). The Notice of Initiation of Five-Year (``Sunset'') Reviews... Tube from Dana Mermelstein, (202) 482-1391. Korea (A-580-859) (1st Review). Light-Walled Rectangular Pipe and Tube from Dana Mermelstein, (202) 482-1391. Mexico (A-201-836) (1st Review)....

  15. 14 CFR 13.20 - Orders of compliance, cease and desist orders, orders of denial, and other orders.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Orders of compliance, cease and desist orders, orders of denial, and other orders. 13.20 Section 13.20 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Legal Enforcement Actions § 13.20 Orders...

  16. Analysis of Performance of Jet Engine from Characteristics of Components II : Interaction of Components as Determined from Engine Operation

    NASA Technical Reports Server (NTRS)

    Goldstein, Arthur W; Alpert, Sumner; Beede, William; Kovach, Karl

    1949-01-01

    In order to understand the operation and the interaction of jet-engine components during engine operation and to determine how component characteristics may be used to compute engine performance, a method to analyze and to estimate performance of such engines was devised and applied to the study of the characteristics of a research turbojet engine built for this investigation. An attempt was made to correlate turbine performance obtained from engine experiments with that obtained by the simpler procedure of separately calibrating the turbine with cold air as a driving fluid in order to investigate the applicability of component calibration. The system of analysis was also applied to prediction of the engine and component performance with assumed modifications of the burner and bearing characteristics, to prediction of component and engine operation during engine acceleration, and to estimates of the performance of the engine and the components when the exhaust gas was used to drive a power turbine.

  17. Spectral Components Analysis of Diffuse Emission Processes

    SciTech Connect

    Malyshev, Dmitry; /KIPAC, Menlo Park

    2012-09-14

    We develop a novel method to separate the components of a diffuse emission process based on an association with the energy spectra. Most of the existing methods use some information about the spatial distribution of components, e.g., closeness to an external template, independence of components etc., in order to separate them. In this paper we propose a method where one puts conditions on the spectra only. The advantages of our method are: 1) it is internal: the maps of the components are constructed as combinations of data in different energy bins, 2) the components may be correlated among each other, 3) the method is semi-blind: in many cases, it is sufficient to assume a functional form of the spectra and determine the parameters from a maximization of a likelihood function. As an example, we derive the CMB map and the foreground maps for seven yeas of WMAP data. In an Appendix, we present a generalization of the method, where one can also add a number of external templates.

  18. Heavy Water Components Test Reactor Decommissioning - Major Component Removal

    SciTech Connect

    Austin, W.; Brinkley, D.

    2010-05-05

    experienced cladding failures as operational capabilities of the different designs were being established. In addition, numerous spills of heavy water occurred within the facility. Currently, radiation and radioactive contamination levels are low within HWCTR with most of the radioactivity contained within the reactor vessel. There are no known insults to the environment, however with the increasing deterioration of the facility, the possibility exists that contamination could spread outside the facility if it is not decommissioned. An interior panoramic view of the ground floor elevation taken in August 2009 is shown in Figure 2. The foreground shows the transfer coffin followed by the reactor vessel and control rod drive platform in the center. Behind the reactor vessel is the fuel pool. Above the ground level are the polar crane and the emergency deluge tank at the top of the dome. Note the considerable rust and degradation of the components and the interior of the containment building. Alternative studies have concluded that the most environmentally safe, cost effective option for final decommissioning is to remove the reactor vessel, steam generators, and all equipment above grade including the dome. Characterization studies along with transport models have concluded that the remaining below grade equipment that is left in place including the transfer coffin will not contribute any significant contamination to the environment in the future. The below grade space will be grouted in place. A concrete cover will be placed over the remaining footprint and the groundwater will be monitored for an indefinite period to ensure compliance with environmental regulations. The schedule for completion of decommissioning is late FY2011. This paper describes the concepts planned in order to remove the major components including the dome, the reactor vessel (RV), the two steam generators (SG), and relocating the transfer coffin (TC).

  19. Complete solutions of zoom curves of three-component zoom lenses with the second component fixed.

    PubMed

    Chen, Chaohsien

    2014-10-10

    Purely algebraic algorithms are presented for solving the zoom curves of a three-component zoom lens of which the second component is fixed on zooming. Two separated algorithms for infinite and finite conjugate imaging conditions are provided. For the infinite-conjugate condition, the transverse magnifications of the second and third components are solved to match the required system focal length, resulting in solving a quadratic equation. For the finite-conjugate condition, three nonlinear simultaneous equations regarding the system magnification, the object-to-image thickness, and the position of the second component are combined into a fourth-order polynomial equation. The roots can all be directly obtained by simple algebraic calculations. As a result, the proposed algebraic algorithms provide a more efficient and complete method than do earlier algorithms adopting scanning procedures. PMID:25322432

  20. Isotropic sequence order learning.

    PubMed

    Porr, Bernd; Wörgötter, Florentin

    2003-04-01

    In this article, we present an isotropic unsupervised algorithm for temporal sequence learning. No special reward signal is used such that all inputs are completely isotropic. All input signals are bandpass filtered before converging onto a linear output neuron. All synaptic weights change according to the correlation of bandpass-filtered inputs with the derivative of the output. We investigate the algorithm in an open- and a closed-loop condition, the latter being defined by embedding the learning system into a behavioral feedback loop. In the open-loop condition, we find that the linear structure of the algorithm allows analytically calculating the shape of the weight change, which is strictly heterosynaptic and follows the shape of the weight change curves found in spike-time-dependent plasticity. Furthermore, we show that synaptic weights stabilize automatically when no more temporal differences exist between the inputs without additional normalizing measures. In the second part of this study, the algorithm is is placed in an environment that leads to closed sensor-motor loop. To this end, a robot is programmed with a prewired retraction reflex reaction in response to collisions. Through isotropic sequence order (ISO) learning, the robot achieves collision avoidance by learning the correlation between his early range-finder signals and the later occurring collision signal. Synaptic weights stabilize at the end of learning as theoretically predicted. Finally, we discuss the relation of ISO learning with other drive reinforcement models and with the commonly used temporal difference learning algorithm. This study is followed up by a mathematical analysis of the closed-loop situation in the companion article in this issue, "ISO Learning Approximates a Solution to the Inverse-Controller Problem in an Unsupervised Behavioral Paradigm" (pp. 865-884). PMID:12689389

  1. Do-not-resuscitate order

    MedlinePlus

    ... order; DNR; DNR order; Advance care directive - DNR; Health care agent - DNR; Health care proxy - DNR; End-of-life - DNR; Living ... medical order written by a doctor. It instructs health care providers not to do cardiopulmonary resuscitation (CPR) ...

  2. Component-specific modeling. [jet engine hot section components

    NASA Technical Reports Server (NTRS)

    Mcknight, R. L.; Maffeo, R. J.; Tipton, M. T.; Weber, G.

    1992-01-01

    Accomplishments are described for a 3 year program to develop methodology for component-specific modeling of aircraft hot section components (turbine blades, turbine vanes, and burner liners). These accomplishments include: (1) engine thermodynamic and mission models, (2) geometry model generators, (3) remeshing, (4) specialty three-dimensional inelastic structural analysis, (5) computationally efficient solvers, (6) adaptive solution strategies, (7) engine performance parameters/component response variables decomposition and synthesis, (8) integrated software architecture and development, and (9) validation cases for software developed.

  3. Magnetism in Parent Iron Chalcogenides: Quantum Fluctuations Select Plaquette Order

    NASA Astrophysics Data System (ADS)

    Ducatman, Samuel; Perkins, Natalia B.; Chubukov, Andrey

    2012-10-01

    We analyze magnetic order in Fe chalcogenide Fe1+yTe, the parent compound of the high-temperature superconductor Fe1+yTe1-xSex. Experiments show that magnetic order in this material contains components with momentum Q1=(π/2,π/2) and Q2=(π/2,-π/2) in the Fe only Brillouin zone. The actual spin order depends on the interplay between these two components. Previous works assumed that the ordered state has a single Q (either Q1 or Q2). In such a state, spins form double stripes along one of the diagonals breaking the rotational C4 symmetry. We show that quantum fluctuations actually select another order—a double Q plaquette state with equal weight of Q1 and Q2 components, which preserves C4 symmetry. We argue that the order in Fe1+yTe is determined by the competition between quantum fluctuations and magnetoelastic coupling.

  4. 49 CFR 453.3 - Detention orders and other orders.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Detention orders and other orders. 453.3 Section 453.3 Transportation Other Regulations Relating to Transportation (Continued) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS CONTROL AND ENFORCEMENT § 453.3 Detention orders and other orders. (a) The terms of...

  5. 49 CFR 453.3 - Detention orders and other orders.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 6 2011-10-01 2011-10-01 false Detention orders and other orders. 453.3 Section 453.3 Transportation Other Regulations Relating to Transportation (Continued) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS CONTROL AND ENFORCEMENT § 453.3 Detention orders and other orders. (a) The terms of...

  6. 48 CFR 53.216-1 - Delivery orders and orders under basic ordering agreements (OF 347).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 2 2014-10-01 2014-10-01 false Delivery orders and orders under basic ordering agreements (OF 347). 53.216-1 Section 53.216-1 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS Prescription of Forms 53.216-1 Delivery orders and orders under...

  7. Block-Krylov component synthesis method for structural model reduction

    NASA Technical Reports Server (NTRS)

    Craig, Roy R., Jr.; Hale, Arthur L.

    1988-01-01

    A new analytical method is presented for generating component shape vectors, or Ritz vectors, for use in component synthesis. Based on the concept of a block-Krylov subspace, easily derived recurrence relations generate blocks of Ritz vectors for each component. The subspace spanned by the Ritz vectors is called a block-Krylov subspace. The synthesis uses the new Ritz vectors rather than component normal modes to reduce the order of large, finite-element component models. An advantage of the Ritz vectors is that they involve significantly less computation than component normal modes. Both 'free-interface' and 'fixed-interface' component models are derived. They yield block-Krylov formulations paralleling the concepts of free-interface and fixed-interface component modal synthesis. Additionally, block-Krylov reduced-order component models are shown to have special disturbability/observability properties. Consequently, the method is attractive in active structural control applications, such as large space structures. The new fixed-interface methodology is demonstrated by a numerical example. The accuracy is found to be comparable to that of fixed-interface component modal synthesis.

  8. The linear stochastic order and directed inference for multivariate ordered distributions

    PubMed Central

    Davidov, Ori; Peddada, Shyamal

    2013-01-01

    Researchers are often interested in drawing inferences regarding the order between two experimental groups on the basis of multivariate response data. Since standard multivariate methods are designed for two sided alternatives they may not be ideal for testing for order between two groups. In this article we introduce the notion of the linear stochastic order and investigate its properties. Statistical theory and methodology are developed to both estimate the direction which best separates two arbitrary ordered distributions and to test for order between the two groups. The new methodology generalizes Roy's classical largest root test to the nonparametric setting and is applicable to random vectors with discrete and/or continuous components. The proposed methodology is illustrated using data obtained from a 90–day pre–chronic rodent cancer bioassay study conducted by the National Toxicology Program (NTP). PMID:23543786

  9. Family size, birth order, and intelligence in a large South American sample.

    PubMed

    Velandia, W; Grandon, G M; Page, E B

    1978-01-01

    The confluence theory, which hypothesizes a relationship between intellectual development birth order, and family size, was examined in a colombian study of more than 36,000 college applicants. The results of the study did not support the confluence theory. The confluence theory states that the intellectual development of a child is related to average mental age of the members of his family at the time of his birth. The mental age of the parents is always assigned a value of 30 and siblings are given scores equivalent to their chronological age at the birth of the subject. Therefore, the average mental age of family members for a 1st born child is 30, or 60 divided by 2. If a subject is born into a family consisting of 2 parents and a 6-year old sibling, the average mental age of family members tends, therefore, to decrease with each birth order. The hypothesis derived from the confluence theory states that there is a positive relationship between average mental age of a subject's family and the subject's performance on intelligence tests. In the Colombian study, data on family size, birth order and socioeconomic status was derived from college application forms. Intelligence test scores for each subject was obtained from college entrance exams. The mental age of each applicant's family at the time of the applicant's birth was calculated. Multiple correlation analysis and path analysis were used to assess the relationship. Results were 1) the test scores of subjects from families with 2,3,4, and 5 children were higher than test scores of the 1st born subjects; 2) the rank order of intelligence by family size was 3,4,5,2,6,1 instead of the hypothesized 1,2,3,4,5,6; and 3) only 1% of the variability in test scores was explained by the variables of birth order and family size. Further analysis indicated that socioeconomic status was a far more powerful explanatory variable than family size. PMID:12266293

  10. Mechanical vs. informational components of price impact

    NASA Astrophysics Data System (ADS)

    Doyne Farmer, J.; Zamani, N.

    2007-01-01

    We study the problem of what causes prices to change. It is well known that trading impacts prices — orders to buy drive the price up, and orders to sell drive it down. We introduce a means of decomposing the total impact of trading into two components, defining the mechanical impact of a trading order as the change in future prices in the absence of any future changes in decision making, and the informational impact as the remainder of the total impact once mechanical impact is removed. This decomposition is performed using order book data from the London Stock Exchange. The average mechanical impact of a market order decays to zero as a function of time, at an asymptotic rate that is consistent with a power law with an exponent of roughly 1.7. In contrast the average informational impact builds to approach a constant value. Initially the impact is entirely mechanical, and is about half as big as the asymptotic informational impact. The size of the informational impact is positively correlated to mechanical impact. For cases where the mechanical impact is zero for all times, we find that the informational impact is negative, i.e. buy market orders that have no mechanical impact at all generate strong negative price responses.

  11. Multi-component assembly casting

    SciTech Connect

    James, Allister W.

    2015-10-13

    Multi-component vane segment and method for forming the same. Assembly includes: positioning a pre-formed airfoil component (12) and a preformed shroud heat resistant material (18) in a mold, wherein the airfoil component (12) and the shroud heat resistant material (18) each comprises an interlocking feature (24); preheating the mold; introducing molten structural material (46) into the mold; and solidifying the molten structural material such that it interlocks the pre-formed airfoil component (12) with respect to the preformed shroud heat resistant material (18) and is effective to provide structural support for the shroud heat resistant material (18). Surfaces between the airfoil component (12) and the structural material (46), between the airfoil component (12) and the shroud heat resistant material (18), and between the shroud heat resistant material (18) and the structural material (46) are free of metallurgical bonds.

  12. Geological & Geophysical findings from seismic, well log and core data for marine gas hydrate deposits at the 1st offshore methane hydrate production test site in the eastern Nankai Trough, offshore Japan: An overview

    NASA Astrophysics Data System (ADS)

    Fujii, T.; Noguchi, S.; Takayama, T.; Suzuki, K.; Yamamoto, K.

    2012-12-01

    In order to evaluate productivity of gas from marine gas hydrate by the depressurization method, Japan Oil, Gas and Metals National Corporation is planning to conduct a full-scale production test in early 2013 at the AT1 site in the north slope of Daini-Atsumi Knoll in the eastern Nankai Trough, Japan. The test location was determined using the combination of detailed 3D seismic reflection pattern analysis, high-density velocity analysis, and P-impedance inversion analysis, which were calibrated using well log data obtained in 2004. At the AT1 site, one production well (AT1-P) and two monitoring wells (AT1-MC and MT1) were drilled from February to March 2012, followed by 1 coring well (AT1-C) from June to July 2012. An extensive logging program with logging while drilling (LWD) and wireline-logging tools, such as GeoVISION (resistivity image), EcoScope (neutron/density porosity, mineral spectroscopy etc.), SonicScanner (Advanced Sonic tool), CMR/ProVISION (Nuclear Magnetic Resonance Tools), XPT (formation pressure, fluid mobility), and IsolationScanner (ultrasonic cement evaluation tools) was conducted at AT1-MC well to evaluate physical reservoir properties of gas hydrate-bearing sediments, to determine production test interval in 2013, and to evaluate cement bonding. Methane hydrate concentrated zone (MHCZ) confirmed by the well logging at AT1-MC was thin turbidites (tens of centimeters to few meters) with 60 m of gross thickness, which is composed of lobe type sequences in the upper part of it and channel sand sequences in the lower part. The gross thickness of MHCZ in the well is thicker than previous wells in 2004 (A1, 45 m) located around 150 m northeast, indicating that the prediction given by seismic inversion analysis was reasonable. Well-to-well correlation between AT1-MC and MT1 wells within 40 m distance exhibited that lateral continuity of these sand layers (upper part of reservoir) are fairly good, which representing ideal reservoir for the production

  13. Magnetic Levitators With Superconductive Components

    NASA Technical Reports Server (NTRS)

    Dolgin, Benjamin P.

    1995-01-01

    Magnetic noncontact levitators that include superconductive components provide vibration-damping suspension for cryogenic instruments, according to proposal. Because superconductive components attached to levitated cryogenic instruments, no additional coolant liquid or refrigeration power needed. Also because vibration-damping components of levitators located outside cold chambers, in ambient environment, not necessary to waste coolant liquid or refrigeration power on dissipation of vibrational energy. At least three levitating magnets and three superconductors necessary for stable levitation.

  14. EP component identification and measurement by principal components analysis.

    PubMed

    Chapman, R M; McCrary, J W

    1995-04-01

    Between the acquisition of Evoked Potential (EP) data and their interpretation lies a major problem: What to measure? An approach to this kind of problem is outlined here in terms of Principal Components Analysis (PCA). An important second theme is that experimental manipulation is important to functional interpretation. It would be desirable to have a system of EP measurement with the following characteristics: (1) represent the data in a concise, parsimonous way; (2) determine EP components from the data without assuming in advance any particular waveforms for the components; (3) extract components which are independent of each other; (4) measure the amounts (contributions) of various components in observed EPs; (5) use measures that have greater reliability than measures at any single time point or peak; and (6) identify and measure components that overlap in time. PCA has these desirable characteristics. Simulations are illustrated. PCA's beauty also has some warts that are discussed. In addition to discussing the usual two-mode model of PCA, an extension of PCA to a three-mode model is described that provides separate parameters for (1) waveforms over time, (2) coefficients for spatial distribution, and (3) scores telling the amount of each component in each EP. PCA is compared with more traditional approaches. Some biophysical considerations are briefly discussed. Choices to be made in applying PCA are considered. Other issues include misallocation of variance, overlapping components, validation, and latency changes. PMID:7626278

  15. Component separation in abdominal trauma.

    PubMed

    Rawstorne, Edward; Smart, Christopher J; Fallis, Simon A; Suggett, Nigel

    2014-01-01

    Component separation is established for complex hernia repairs. This case presents early component separation and release of the anterior and posterior sheath to facilitate closure of the abdominal wall following emergency laparotomy, reinforcing the repair with a biological mesh. On Day 11 following an emergency laparotomy for penetrating trauma, this patient underwent component separation and release of the anterior and posterior sheath. An intra-abdominal biological mesh was secured, and the fascia and skin closed successfully. Primary abdominal closure can be achieved in patients with penetrating abdominal trauma with the use of component separation and insertion of intra-abdominal biological mesh, where standard closure is not possible. PMID:24876334

  16. Methods of component mode synthesis

    NASA Technical Reports Server (NTRS)

    Craig, R. R., Jr.

    1977-01-01

    A generalized substructure coupling, or component mode synthesis, procedure is described. Specific methods, applications, and such special topics as damping and experimental verification are surveyed.

  17. Spacetime encodings. III. Second order Killing tensors

    SciTech Connect

    Brink, Jeandrew

    2010-01-15

    This paper explores the Petrov type D, stationary axisymmetric vacuum (SAV) spacetimes that were found by Carter to have separable Hamilton-Jacobi equations, and thus admit a second-order Killing tensor. The derivation of the spacetimes presented in this paper borrows from ideas about dynamical systems, and illustrates concepts that can be generalized to higher-order Killing tensors. The relationship between the components of the Killing equations and metric functions are given explicitly. The origin of the four separable coordinate systems found by Carter is explained and classified in terms of the analytic structure associated with the Killing equations. A geometric picture of what the orbital invariants may represent is built. Requiring that a SAV spacetime admits a second-order Killing tensor is very restrictive, selecting very few candidates from the group of all possible SAV spacetimes. This restriction arises due to the fact that the consistency conditions associated with the Killing equations require that the field variables obey a second-order differential equation, as opposed to a fourth-order differential equation that imposes the weaker condition that the spacetime be SAV. This paper introduces ideas that could lead to the explicit computation of more general orbital invariants in the form of higher-order Killing tensors.

  18. Superacid catalyzed coal conversion chemistry. 1st and 2nd quarterly technical progress reports, September 1, 1983-March 30, 1984. [Model compound consisting of 2 benzene rings connected with various bridging units such as alkylidene, ether, sulfide, etc

    SciTech Connect

    Olah, G.A.

    1984-01-01

    In our laboratories we have previously developed a mild coal conversion process. This involves the use of a superacid system consisting of HF and BF/sub 3/ in presence of hydrogen and/or a hydrogen donor solvent. In order to understand the chemistry involved in the process of depolymerization of coal by the HF:BF/sub 3/:H/sub 2/ system we are carrying out a systematic study of a number of coal model compounds. The model compounds selected for present study have two benzene rings connected with various bridging units such as alkylidene, ether, sulfide etc. From studies so far carried out it appears that high pyridine extractibilities achieved by treating coal at temperature below 100/sup 0/C results from the cleavage of bridges such as present in bibenzyl, diphenyl methane, dibenzyl ether, dibenzyl sulfide etc. On the other hand the increased cyclohexane extractibility and distillability observed at relatively higher temperatures and hydrogen pressures reflects the hydrogenation and cleavage of the aromatic backbone in coal structure similar to what is seen in the conversion of model compounds such as biphenyl, diphenyl ether, diphenyl sulfide, anthracene, etc.

  19. Topology in Ordered Phases

    NASA Astrophysics Data System (ADS)

    Tanda, Satoshi; Matsuyama, Toyoki; Oda, Migaku; Asano, Yasuhiro; Yakubo, Kousuke

    2006-08-01

    .]. Nanofibers of hydrogen storage alloy / I. Saita ... [et al.]. Synthesis of stable icosahedral quasicrystals in Zn-Sc based alloys and their magnetic properties / S. Kashimoto and T. Ishimasa. One-armed spiral wave excited by eam pressure in accretion disks in Be/X-Ray binaries / K. Hayasaki and A. T. Okazaki -- IV. Topological defects and excitations. Topological excitations in the ground state of charge density wave systems / P. Monceau. Soliton transport in nanoscale charge-density-wave systems / K. Inagaki, T. Toshima and S. Tanda. Topological defects in triplet superconductors UPt3, Sr[symbol]RuO[symbol], etc. / K. Maki ... [et al.]. Microscopic structure of vortices in type II superconductors / K. Machida ... [et al.]. Microscopic neutron investigation of the Abrikosov state of high-temperature superconductors / J. Mesot. Energy dissipation at nano-scale topological defects of high-Tc superconductors: microwave study / A. Maeda. Pressure induced topological phase transition in the heavy Fermion compound CeAl[symbol] / H. Miyagawa ... [et al.]. Explanation for the unusual orientation of LSCO square vortex lattice in terms of nodal superconductivity / M. Oda. Local electronic states in Bi[symbol]Sr[symbol]CaCu[symbol]O[symbol] / A. Hashimoto ... [et al.] -- V. Topology in quantum phenomena. Topological vortex formation in a Bose-Einstein condensate of alkali-metal atoms / M. Nakahara. Quantum phase transition of [symbol]He confined in nano-porous media / K. Shirahama, K. Yamamoto and Y. Shibayama. A new mean-field theory for Bose-Einstein condensates / T. Kita. Spin current in topological cristals / Y. Asano. Antiferromagnetic defects in non-magnetic hidden order of the heavy-electron system URu[symbol]Si[symbol] / H. Amitsuka, K. Tenya and M. Yokoyama. Magnetic-field dependences of thermodynamic quantities in the vortex state of Type-II superconductors / K. Watanabe, T. Kita and M. Arai. Three-magnon-mediated nuclear spin relaxation in quantum ferrimagnets of topological

  20. Understanding the Cu-Zn brass alloys using a short-range-order cluster model: significance of specific compositions of industrial alloys.

    PubMed

    Hong, H L; Wang, Q; Dong, C; Liaw, Peter K

    2014-01-01

    Metallic alloys show complex chemistries that are not yet understood so far. It has been widely accepted that behind the composition selection lies a short-range-order mechanism for solid solutions. The present paper addresses this fundamental question by examining the face-centered-cubic Cu-Zn α-brasses. A new structural approach, the cluster-plus-glue-atom model, is introduced, which suits specifically for the description of short-range-order structures in disordered systems. Two types of formulas are pointed out, [Zn-Cu12]Zn(1~6) and [Zn-Cu12](Zn,Cu)6, which explain the α-brasses listed in the American Society for Testing and Materials (ASTM) specifications. In these formulas, the bracketed parts represent the 1(st)-neighbor cluster, and each cluster is matched with one to six 2nd-neighbor Zn atoms or with six mixed (Zn,Cu) atoms. Such a cluster-based formulism describes the 1st- and 2nd-neighbor local atomic units where the solute and solvent interactions are ideally satisfied. The Cu-Ni industrial alloys are also explained, thus proving the universality of the cluster-formula approach in understanding the alloy selections. The revelation of the composition formulas for the Cu-(Zn,Ni) industrial alloys points to the common existence of simple composition rules behind seemingly complex chemistries of industrial alloys, thus offering a fundamental and practical method towards composition interpretations of all kinds of alloys. PMID:25399835

  1. Understanding the Cu-Zn brass alloys using a short-range-order cluster model: significance of specific compositions of industrial alloys

    PubMed Central

    Hong, H. L.; Wang, Q.; Dong, C.; Liaw, Peter K.

    2014-01-01

    Metallic alloys show complex chemistries that are not yet understood so far. It has been widely accepted that behind the composition selection lies a short-range-order mechanism for solid solutions. The present paper addresses this fundamental question by examining the face-centered-cubic Cu-Zn α-brasses. A new structural approach, the cluster-plus-glue-atom model, is introduced, which suits specifically for the description of short-range-order structures in disordered systems. Two types of formulas are pointed out, [Zn-Cu12]Zn1~6 and [Zn-Cu12](Zn,Cu)6, which explain the α-brasses listed in the American Society for Testing and Materials (ASTM) specifications. In these formulas, the bracketed parts represent the 1st-neighbor cluster, and each cluster is matched with one to six 2nd-neighbor Zn atoms or with six mixed (Zn,Cu) atoms. Such a cluster-based formulism describes the 1st- and 2nd-neighbor local atomic units where the solute and solvent interactions are ideally satisfied. The Cu-Ni industrial alloys are also explained, thus proving the universality of the cluster-formula approach in understanding the alloy selections. The revelation of the composition formulas for the Cu-(Zn,Ni) industrial alloys points to the common existence of simple composition rules behind seemingly complex chemistries of industrial alloys, thus offering a fundamental and practical method towards composition interpretations of all kinds of alloys. PMID:25399835

  2. An atlas of Rapp's 180-th order geopotential.

    NASA Astrophysics Data System (ADS)

    Melvin, P. J.

    1986-08-01

    Deprit's 1979 approach to the summation of the spherical harmonic expansion of the geopotential has been modified to spherical components and normalized Legendre polynomials. An algorithm has been developed which produces ten fields at the users option: the undulations of the geoid, three anomalous components of the gravity vector, or six components of the Hessian of the geopotential (gravity gradient). The algorithm is stable to high orders in single precision and does not treat the polar regions as a special case. Eleven contour maps of components of the anomalous geopotential on the surface of the ellipsoid are presented to validate the algorithm.

  3. 78 FR 56245 - Certain Wireless Consumer Electronics Devices and Components Thereof; Notice of Request for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-12

    ... COMMISSION Certain Wireless Consumer Electronics Devices and Components Thereof; Notice of Request for... limited exclusion order against certain wireless consumer electronics devices and components thereof... Corporation of Kyoto, Japan; Kyocera Communications, Inc. of San Diego, California; LG Electronics, Inc....

  4. Robust Correlated and Individual Component Analysis.

    PubMed

    Panagakis, Yannis; Nicolaou, Mihalis A; Zafeiriou, Stefanos; Pantic, Maja

    2016-08-01

    Recovering correlated and individual components of two, possibly temporally misaligned, sets of data is a fundamental task in disciplines such as image, vision, and behavior computing, with application to problems such as multi-modal fusion (via correlated components), predictive analysis, and clustering (via the individual ones). Here, we study the extraction of correlated and individual components under real-world conditions, namely i) the presence of gross non-Gaussian noise and ii) temporally misaligned data. In this light, we propose a method for the Robust Correlated and Individual Component Analysis (RCICA) of two sets of data in the presence of gross, sparse errors. We furthermore extend RCICA in order to handle temporal incongruities arising in the data. To this end, two suitable optimization problems are solved. The generality of the proposed methods is demonstrated by applying them onto 4 applications, namely i) heterogeneous face recognition, ii) multi-modal feature fusion for human behavior analysis (i.e., audio-visual prediction of interest and conflict), iii) face clustering, and iv) thetemporal alignment of facial expressions. Experimental results on 2 synthetic and 7 real world datasets indicate the robustness and effectiveness of the proposed methodson these application domains, outperforming other state-of-the-art methods in the field. PMID:26552077

  5. Principal component structuring of the non-REM Sleep EEG spectrum in older adults yields age-related changes in the sleep and wake drives.

    PubMed

    Putilov, Arcady A; Münch, Mirjam Y; Cajochen, Christian

    2013-12-01

    Age-related disturbances of the sleep-wake cycle can reflect ontogenetic changes in regulatory mechanisms underlying normal and pathological aging, but the exact nature of these changes remains unclear. The present report is the first attempt to apply principal component analysis to the electroencephalographic (EEG) spectrum to examine of whether the observed age-related changes in the objective sleep measures can be linked to the opponent sleep-promoting and wake-promoting processes. The EEG indicators of these processes--scores on the 1st and 2nd principal components of the EEG spectrum, respectively--were compared in 15 older (57-74 years) and 16 younger (20-31 years) healthy volunteers. The scores were calculated for non-REM sleep episodes which occurred during ten 75-min naps scheduled every 150 min throughout a 40-h constant routine protocol. Both, a decrease of the 1st principal component score and an increase of the 2nd principal component score were found to contribute to such most obvious age-related modification of the sleep EEG spectrum as attenuation of EEG slow-wave activity in older people. Therefore, we concluded that the normal aging process can reflect both a weakening of the sleep-promoting process and a strengthening of the wake-promoting process, respectively. Such bidirectional changes in chronoregulatory processes may explain why sleep of older people is characterized by the few profitable and a number of detrimental features (i.e., a better ability to cope with daytime sleepiness and sleep loss vs. difficulty of falling asleep, decreased total nighttime sleep, "lightened" and fragmentized sleep, unwanted early morning awakenings, etc.). PMID:23855458

  6. RTI Essential Components Integrity Worksheet

    ERIC Educational Resources Information Center

    National Center on Response to Intervention, 2011

    2011-01-01

    The Response to Intervention (RTI) Essential Components Integrity Rubric and the RTI Essential Components Integrity Worksheet are for use by individuals responsible for monitoring the school-level fidelity of Response to Intervention (RTI) implementation. They may also be used by schools for self-appraisal; however, they were not designed for…

  7. RTI Essential Components Integrity Rubric

    ERIC Educational Resources Information Center

    National Center on Response to Intervention, 2011

    2011-01-01

    The Response to Intervention (RTI) Essential Components Integrity Rubric is for use by individuals who are responsible for monitoring school-level fidelity of RTI implementation. The rubric is aligned with "Essential Components of RTI: A Closer Look at Response to Intervention" (National Center on Response to Intervention, 2010). Subjects covered…

  8. Nonnutrient Components of Fish Diets

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Though the various dietary nutrients are the primary concerns of nutritionists when formulating feeds for intensively cultured tilapia, the inclusion of dietary components that do not have nutritional value can have profound effects on the performance of fish fed these diets. These components may be...

  9. Heat treating of manufactured components

    DOEpatents

    Ripley, Edward B.

    2012-05-22

    An apparatus for heat treating manufactured components using microwave energy and microwave susceptor material is disclosed. The system typically includes an insulating vessel placed within a microwave applicator chamber. A moderating material is positioned inside the insulating vessel so that a substantial portion of the exterior surface of each component for heat treating is in contact with the moderating material.

  10. Nickel-hydrogen component development

    NASA Technical Reports Server (NTRS)

    Charleston, J. A.

    1983-01-01

    Light weight energy storage systems for future space missions are investigated. One of the systems being studied is the nickel hydrogen battery. This battery is designed to achieve longer life, improve performance, and higher energy densities for space applications. The nickel hydrogen component development is discussed. Test data from polarization measurements of the hydrogen electrode component is presented.

  11. Components of Successful Magnet Schools.

    ERIC Educational Resources Information Center

    Bryant, Faye B.

    This paper identifies and discusses components of successful magnet programs. It is based on a review of existing research literature and information gathered directly from school districts. First, the paper discusses separately the following elements, which are considered "core components": (1) leadership; (2) organizational structure; (3)…

  12. Regularized Generalized Structured Component Analysis

    ERIC Educational Resources Information Center

    Hwang, Heungsun

    2009-01-01

    Generalized structured component analysis (GSCA) has been proposed as a component-based approach to structural equation modeling. In practice, GSCA may suffer from multi-collinearity, i.e., high correlations among exogenous variables. GSCA has yet no remedy for this problem. Thus, a regularized extension of GSCA is proposed that integrates a ridge…

  13. Multi-Velocity Component LDV

    NASA Technical Reports Server (NTRS)

    Johnson, Dennis A. (Inventor)

    1996-01-01

    A laser doppler velocimeter uses frequency shifting of a laser beam to provide signal information for each velocity component. A composite electrical signal generated by a light detector is digitized and a processor produces a discrete Fourier transform based on the digitized electrical signal. The transform includes two peak frequencies corresponding to the two velocity components.

  14. Semantic Annotation of Computational Components

    NASA Technical Reports Server (NTRS)

    Vanderbilt, Peter; Mehrotra, Piyush

    2004-01-01

    This paper describes a methodology to specify machine-processable semantic descriptions of computational components to enable them to be shared and reused. A particular focus of this scheme is to enable automatic compositon of such components into simple work-flows.

  15. Order sets utilization in a clinical order entry system.

    PubMed

    Cowden, Daniel; Barbacioru, Catalin; Kahwash, Eiad; Saltz, Joel

    2003-01-01

    An order set is a predefined template that has been utilized in the standard care of hospitals for many years. While in the past, it took the form of pen and paper, today, it is, indeed, electronic. Within order sets are distinct ordering patterns that may yield fruitful results for clinicians and informaticians, alike. Protocols like there electronic counterpart, order sets, provide an 'indication' identifying the clinical scenario of the patient's condition when the ordering event occurred. This 'indication' is rarely captured by individual orders, and provides difficult challenges to developers of information systems. While mandating an 'indication' be entered for every medication or lab order makes the job much more tasking on the physician provider, it is appealing to researchers and accountants. We have attempted to bypasses that consideration by identifying ordering patterns that predict diagnostic related codes (DRGs) and diagnostic codes which would greatly facilitate the information gathering process and still provide a flexible and user friendly physician interface. PMID:14728324

  16. Development of hermetic, fiberoptic components

    SciTech Connect

    Kramer, D.P.; Beckman, T.M.; Ewick, D.W.

    1990-04-30

    The fabrication of hermetic, fiberoptic components using a variety of novel processing techniques has been demonstrated. These processing techniques are based on standard sealing technologies and include the sealing of optical ``pin`` feedthrough components and the sealing of lengths of optical fibers. Various types of optical fibers including typical, plastic-buffered fibers and metal-coated fibers, have been hermetically sealed into components. Background research has disclosed that the temperatures necessary for seal formation do not degrade the properties of the optical fibers. A series of pyrotechnic test components has been fabricated using one of the newly developed processing techniques, and the firing characteristics of these ``full- up`` components have been determined. 7 refs., 21 figs.

  17. Multi-Component Dark Matter

    SciTech Connect

    Zurek, Kathryn M.

    2008-11-01

    We explore multi-component dark matter models where the dark sector consists of multiple stable states with different mass scales, and dark forces coupling these states further enrich the dynamics. The multi-component nature of the dark matter naturally arises in supersymmetric models, where both R parity and an additional symmetry, such as a Z{sub 2}, is preserved. We focus on a particular model where the heavier component of dark matter carries lepton number and annihilates mostly to leptons. The heavier component, which is essentially a sterile neutrino, naturally explains the PAMELA, ATIC and synchrotron signals, without an excess in antiprotons which typically mars other models of weak scale dark matter. The lighter component, which may have a mass from a GeV to a TeV, may explain the DAMA signal, and may be visible in low threshold runs of CDMS and XENON, which search for light dark matter.

  18. Protective orders: questions and conundrums.

    PubMed

    Logan, T K; Shannon, Lisa; Walker, Robert; Faragher, Teri Marie

    2006-07-01

    Current media portrayal of protective orders is often negative, focusing on weaknesses in how protective orders are obtained and enforced. This review of research findings on protective orders examines issues and suggests areas in need of future research to clarify and improve public policy. More specifically, this review has five main objectives: (a) to provide background information about partner violence and the need for protective orders; (b) to describe what protective orders are, how many women obtain them, and the advantages and disadvantages of obtaining protective orders; (c) to examine characteristics of women who seek protective orders; (d) to explore research on whether protective orders actually increase women's safety; and (e) to highlight opportunities and gaps in the practice and research literature regarding the use of protective orders for women with violent partners or ex-partners. PMID:16785286

  19. A reference architecture for the component factory

    NASA Technical Reports Server (NTRS)

    Basili, Victor R.; Caldiera, Gianluigi; Cantone, Giovanni

    1992-01-01

    Software reuse can be achieved through an organization that focuses on utilization of life cycle products from previous developments. The component factory is both an example of the more general concepts of experience and domain factory and an organizational unit worth being considered independently. The critical features of such an organization are flexibility and continuous improvement. In order to achieve these features we can represent the architecture of the factory at different levels of abstraction and define a reference architecture from which specific architectures can be derived by instantiation. A reference architecture is an implementation and organization independent representation of the component factory and its environment. The paper outlines this reference architecture, discusses the instantiation process, and presents some examples of specific architectures by comparing them in the framework of the reference model.

  20. Complex Principal Components for Robust Motion Estimation

    PubMed Central

    Mauldin, F. William; Viola, Francesco; Walker, William F.

    2010-01-01

    Bias and variance errors in motion estimation result from electronic noise, decorrelation, aliasing, and inherent algorithm limitations. Unlike most error sources, decorrelation is coherent over time and has the same power spectrum as the signal. Thus, reducing decorrelation is impossible through frequency domain filtering or simple averaging and must be achieved through other methods. In this paper, we present a novel motion estimator, termed the principal component displacement estimator (PCDE), which takes advantage of the signal separation capabilities of principal component analysis (PCA) to reject decorrelation and noise. Furthermore, PCDE only requires the computation of a single principal component, enabling computational speed that is on the same order of magnitude or faster than the commonly used Loupas algorithm. Unlike prior PCA strategies, PCDE uses complex data to generate motion estimates using only a single principal component. The use of complex echo data is critical because it allows for separation of signal components based on motion, which is revealed through phase changes of the complex principal components. PCDE operates on the assumption that the signal component of interest is also the most energetic component in an ensemble of echo data. This assumption holds in most clinical ultrasound environments. However, in environments where electronic noise SNR is less than 0 dB or in blood flow data for which the wall signal dominates the signal from blood flow, the calculation of more than one PC is required to obtain the signal of interest. We simulated synthetic ultrasound data to assess the performance of PCDE over a wide range of imaging conditions and in the presence of decorrelation and additive noise. Under typical ultrasonic elasticity imaging conditions (0.98 signal correlation, 25 dB SNR, 1 sample shift), PCDE decreased estimation bias by more than 10% and standard deviation by more than 30% compared with the Loupas method and normalized