Science.gov

Sample records for 1x1 degree grid

  1. AntarcticCRUST-08: New crustal model of Antarctica region based on seismic data - next step for building global crustal model with resolution of 1 x 1 degree

    NASA Astrophysics Data System (ADS)

    Baranov, A. A.

    2009-04-01

    Different tectonic units cover the Antarctic territory: platform, orogen and depression structures. This structural variability is reflected both in thickness and physical properties of the crust. Previous crustal model (CRUST 2.0. Bassin et al. 2000 [1]) have 2x2 degree resolution and don't meet present-day requirements. A lot of new seismic data and regional compilations became available during last several years. We used data of deep seismic reflection, refraction and receiver functions studies as well as existing regional models (e.g. for Maud Land region, Hoffmann et al., 2003 [2]) from published papers and integrate them in a new model at a uniform grid with resolution of 1x1 degree. A new digital 3D model for the crust of Western and Eastern Antarctica and surroundings have been built. The existing data were verified and crosschecked. We present a suite of crustal models within the main tectonic units: West Antarctica rift system (WARS), the Transantarctic Mountains (TAMs), and East Antarctica (EA). As the first result, we demonstrate a new Moho map for the region. The new map demonstrates the large differences with previous models. It turns out that many regions are more heterogeneous than it was demonstrated by the previous compilations. The crustal model comprises 3 layers of crystalline crust. For each of the three basic layers the thickness and the P-wave seismic velocity (Vp) are displayed. The West Antarctic rift system is one of the largest zones of continental extension on the Earth. The seismic data show a thin extended continental crust. Crustal thickness of WARS is variable from 21 km in the Bentley subglacial trench, to 32 km in the southern flank of the Marie Byrd Land. Transantarctic Mountains: 4000 km long, peaks 4 km above Sea Level, 200-300 km wide. TAMs are characterized by the rather strong variations of the Moho depth (28-40 km). Further inland, beneath the TAM, the estimated Moho depths range from 30-33 km (30 km from the coast) to 36

  2. Alpha-Gallium (010) surface reconstruction: a LEED structural analysis of the (1x1) room temperature and (2rt2xrt2)R45 degrees low temperature structures

    SciTech Connect

    More, S.; Soares, E.A.; Van Hove, M.A.; Lizzit, S.; Baraldi, A.; Grutter, Ch.; Bilgram, J.H.

    2003-02-28

    The geometric structure of the alpha-Ga(010)-(1x1) room temperature structure and its (2rt2xrt2) R45 degrees reconstruction below 232 K have been determined using Low Energy Electron Diffraction (LEED) structure analysis. The room temperature structure conforms to the cut-dimer model, forming a two-dimensional metallic structure with only minimal lateral displacements of the atoms. The topmost interlayer distance is 1.53 Angstrom, corresponding to a spacing expansion of 2 percent from the bulk. In the low-temperature structure, the surface atoms shift to dimerize within the top two layers, resulting in a network of mostly covalent bonds, which form both parallel and perpendicular to the surface plane. The bond lengths of some of these dimers are about 10 percent shorter than the bond length found in the alpha-Ga bulk and are thus shorter than any Ga-Ga bonds reported so far.

  3. Multi-flow virtual concatenation triggered by path cascading degree in Flexi-Grid optical networks

    NASA Astrophysics Data System (ADS)

    Yang, Hui; Zhang, Jie; Zhao, Yongli; Wang, Shouyu; Gu, Wanyi; Han, Jianrui; Lin, Yi; Lee, Young

    2013-12-01

    The Flexi-Grid optical networks can elastically allocate spectrum tailored for various bandwidth requirements. In the flexible architecture, routing and spectrum allocation (RSA) is the key problem is to assign spectral resources to accommodate traffic demands. However, spectrum continuity and contiguity constraints in Flexi-Grid optical networks may cause the network fragmentation issue and lead to poor spectrum utilization. In this paper, different from defragmentation methods, we propose multi-flow virtual concatenation (MFVC) in Flexi-Grid optical networks. MFVC can utilize spectral fragments effectively and decrease blocking probability without influencing the already existing active services or wasting additional spectrum resources. We also analyze the feasibility of MFVC and present a MFVC-enabled transponder and control model implementation. For estimating the distribution and size of available fragments on a path in advance, a split-multi-flow RSA heuristic algorithm (SMF) is proposed by introducing path cascading degree (PCD) based triggered mechanism according to the proposed model. Additionally, resource assignment scheme, guard band size, maximum number of split-flow and differential delay constraint are also considered into MFVC and the performances of the proposed algorithm can be demonstrated to improve the spectral utilization and greatly decrease blocking probability through extensive simulations.

  4. Fast ultrahigh-degree global spherical harmonic synthesis on nonequispaced grid points at irregular surfaces

    NASA Astrophysics Data System (ADS)

    Moazezi, Siamak; Zomorrodian, Hossein; Siahkoohi, Hamid Reza; Azmoudeh-Ardalan, Alireza; Gholami, Ali

    2016-05-01

    In this paper, we presented a fast unified method to compute the gravity field functionals and their directional derivatives up to arbitrary orders on nonequispaced grid points at irregular surfaces using ultrahigh-degree models. The direct spherical harmonic synthesis (SHS) for computing the gravity field functionals at arbitrary locations through the Legendre functions is a time-consuming task for high-order and -degree models. Besides, to compute the derivatives of SHS in terms of latitude, the derivatives of the Legendre functions are needed. Therefore, we used Fourier coefficients of Wigner d-functions to compute the directional derivatives of SHS up to arbitrary orders. We also showed that these functions and their derivatives up to order 2 are stable up to ultrahigh-degree 2^{14} = 16{,}384 using extended double precision (i.e., 80 bits variables). Although 2D-FFT can accelerate the computation of global SHS (GSHS), it restricts the results on equispaced grid points. Hence, we used the nonequispaced FFT (NFFT) for computing GSHS on irregular grid points on the sphere that it is the fast nonequispaced GSHS (NGSHS). For maximum degree N and computing points of O(N^2) with arbitrary locations, the direct computation methods have the complexity of O(N^4) . But the presented algorithm with and without precomputed Fourier coefficients of Wigner d-functions has the complexity of O(N^2 log ^2 N + N^2 s^2) and O(N^3 + N^2 s^2) , respectively, where s is cutoff parameter of convolution in NFFT. Using a convolution technique in frequency domain, the NGSHS on the ellipsoid was computed. For computation the gravity field functionals by the NGSHS at irregular surfaces, we defined the Taylor expansion and the Padé approximation both on the sphere and on the ellipsoid. The results showed that the constructed Padé approximation on the ellipsoid provides better accuracy. Finally, we showed that the introduced unified algorithm achieves the required accuracy and that it is

  5. THE DEVELOPMENT OF A 1990 GLOBAL INVENTORY FOR SO(X) AND NO(X) ON A 1(DEGREE) X 1(DEGREE) LATITUDE-LONGITUDE GRID.

    SciTech Connect

    VAN HEYST,B.J.

    1999-10-01

    Sulfur and nitrogen oxides emitted to the atmosphere have been linked to the acidification of water bodies and soils and perturbations in the earth's radiation balance. In order to model the global transport and transformation of SO{sub x} and NO{sub x}, detailed spatial and temporal emission inventories are required. Benkovitz et al. (1996) published the development of an inventory of 1985 global emissions of SO{sub x} and NO{sub x} from anthropogenic sources. The inventory was gridded to a 1{degree} x 1{degree} latitude-longitude grid and has served as input to several global modeling studies. There is now a need to provide modelers with an update of this inventory to a more recent year, with a split of the emissions into elevated and low level sources. This paper describes the development of a 1990 update of the SO{sub x} and NO{sub x} global inventories that also includes a breakdown of sources into 17 sector groups. The inventory development starts with a gridded global default EDGAR inventory (Olivier et al, 1996). In countries where more detailed national inventories are available, these are used to replace the emissions for those countries in the global default. The gridded emissions are distributed into two height levels (0-100m and >100m) based on the final plume heights that are estimated to be typical for the various sectors considered. The sources of data as well as some of the methodologies employed to compile and develop the 1990 global inventory for SO{sub x} and NO{sub x} are discussed. The results reported should be considered to be interim since the work is still in progress and additional data sets are expected to become available.

  6. Arsenic-terminated Ge(111): An ideal 1 x 1 surface

    SciTech Connect

    Bringans, R.D.; Uhrberg, R.I.G.; Bachrach, R.Z.; Northrup, J.E.

    1985-07-29

    Arsenic interaction with the Ge(111) surface results in the replacement of the outer Ge layer with an As layer. This system has a 1 x 1 symmetry and the calculated positions of the As atoms are very close to the positions expected from bulk bond lengths. Ge(111):As is thus a model ideal surface and a comparison is made of an experimental and a theoretical determination of its fully occupied surface band.

  7. Global map of heat flow on a 2 degree grid - digitally available

    NASA Astrophysics Data System (ADS)

    Davies, J. Huw

    2014-05-01

    A global map of surface heat flow is developed on a 2° by 2° equal area grid, and is made available digitally. It is based on a global heat flow data set of over 38,000 measurements, very similar to that used in Davies & Davies (2010). The map consists of three components. Firstly, in regions of young ocean crust (<67.7Ma) the model estimate uses a half-space conduction model based on the age of the oceanic crust, using parameters of Jaupart et al., (2007). This is done since it is well known that raw data measurements are frequently influenced by significant hydrothermal circulation. Secondly in other regions of data coverage the estimate is based on data measurements. At the map resolution these two categories (young ocean, data covered) cover 65% of Earth's surface. The estimate has been developed in two different ways. In one way the mean value is used and in the second the median is used. The median estimate might be expected to be less sensitive to outliers. Thirdly, for all other regions the estimate is based on the assumption that there is a correlation between heat-flow and geology. This is undertaken using the CCGM (2000) digital geology map. This assumption is assessed and the correlation is found to provide a minor improvement over assuming that heat flow would be represented by the global average. The estimate for Antarctica is guided by proxy measurements. All the work is undertaken using GIS methods. Estimates are made of the errors for all components. The results have been made available as digital files, including shapefiles and tab-delimited and csv ASCII files. In addition to the equal area grid, the results are also available on an equal longitude grid. The map has been published -Davies (2013). The digital files are available in the supplementary information of the publication. Commission for the Geological Map of the World (2000), Geological Map of the World at 1:25000000, UNESCO/CCGM, Paris. Davies, JH, (2013) A global map of solid Earth

  8. Language Learning Actions in Two 1x1 Secondary Schools in Catalonia: The Case of Online Language Resources

    ERIC Educational Resources Information Center

    Calvo, Boris Vázquez; Cassany, Daniel

    2016-01-01

    This paper identifies and describes current attitudes towards classroom digitization and digital language learning practices under the umbrella of EduCAT 1x1, the One-Laptop-Per-Child (OLPC or 1x1) initiative in place in Catalonia. We thoroughly analyze practices worked out by six language teachers and twelve Compulsory Secondary Education (CSE)…

  9. Degradation of antibiotic amoxicillin using 1 x 1 molecular sieve-structured manganese oxide.

    PubMed

    Kuan, Wen-Hui; Hu, Ching-Yao; Liu, Bin-Sheng; Tzou, Yu-Min

    2013-01-01

    The kinetics and mechanism ofamoxicillin (AMO) degradation using a 1 x 1 molecular sieve-structured manganese oxide (MnO2) was studied. The presence of the buffer solution (i.e., NaHCO3, NaH2PO4 and KH2PO4) diminished AMO binding to MnO2, thus reducing AMO degradation in the pretest; therefore, all other experiments in this study were conducted without the addition of a buffer. Third-order rate constants, second-order on AMO and first-order on MnO2 increased with elevating pH level (2.81-7.23) from 0.54 to 9.17 M(-2) s(-1), and it decreased to 4.27 M(-2) s(-1) at pH 8.53 beyond the pk(a2) of AMO (7.3). The dissolution of the MnO2 suspension with and without AMO exhibited a similar trend; that is, Mn2+ concentration increased with decreasing pH. However, the dissolution of MnO2 with AMO was greater than that without AMO, except for the reaction occurring at pH 8.53, partially indicating that MnO2 acts as an oxidant in AMO degradation. The preliminary chromatogram data display different products with varying pH reaction s, implying that AMO elimination using this 1 x 1 molecular sieve-structured MnO2 is by adsorption as well as oxidative degradation. A complementary experiment indicates that the amount of oxidatively degraded AMO increases substantially from 65.5% at 4 h to 95% at 48 h, whereas the AMO adsorbed onto MnO2 decreases slightly from 4.5% at4 h to 2.4% at 48 h. The oxidative degradation accounted for more AMO removal than adsorption over the whole reaction course, indicating that the oxidative reaction of AMO on MnO2 dominated the AMO removal. PMID:24350501

  10. High-efficiency (6+1)x1 combiner for high power fiber lasers and amplifiers

    NASA Astrophysics Data System (ADS)

    Neugroschl, Dan; Park, Jongchul; Wlodawski, Mitchell; Singer, Jonathan; Kopp, Victor I.

    2013-02-01

    We have developed a (6+1)x1 combiner for fiber lasers and amplifiers based on a glass fusion technology. We have combined a conventional fiber fusion technology for pump channels with a new design for a single mode signal channel, which utilizes a vanishing core technology. The approach has been developed for single channel spot size converters and pitch reducing optical fiber arrays (PROFAs). Flexibility of this technology allows a custom design to match both a single or large mode area fiber at the input and a required active fiber at the output. The technology allows two parameters, mode field diameter (MFD) and taper diameter or channel spacing to be adjusted independently resulting in low loss coupling for signal channel at input and output. Utilizing this approach we have obtained better than 0.3 dB coupling for a signal channel at 1550 nm with a standard SMF28 fiber at the input and an active fiber at the output, while using six conventional 105/125 micron fibers as pump channels operating at 974 nm efficiently coupled to a double-clad fiber. Low signal loss results in high efficiency lasing or amplification suitable for high power applications. This unique technology allows excellent coupling for the signal channel as well as for the pump channels and is amenable to even more pump channels if desired.

  11. Geographic patterns of carbon dioxide emissions from fossil-fuel burning, hydraulic cement production, and gas flaring on a one degree by one degree grid cell basis: 1950 to 1990

    SciTech Connect

    Brenkert, A.L.; Andres, R.J.; Marland, G.; Fung, I. |; Matthews, E. |

    1997-03-01

    Data sets of one degree latitude by one degree longitude carbon dioxide (CO{sub 2}) emissions in units of thousand metric tons of carbon (C) per year from anthropogenic sources have been produced for 1950, 1960, 1970, 1980 and 1990. Detailed geographic information on CO{sub 2} emissions can be critical in understanding the pattern of the atmospheric and biospheric response to these emissions. Global, regional and national annual estimates for 1950 through 1992 were published previously. Those national, annual CO{sub 2} emission estimates were based on statistics on fossil-fuel burning, cement manufacturing and gas flaring in oil fields as well as energy production, consumption and trade data, using the methods of Marland and Rotty. The national annual estimates were combined with gridded one-degree data on political units and 1984 human populations to create the new gridded CO{sub 2} emission data sets. The same population distribution was used for each of the years as proxy for the emission distribution within each country. The implied assumption for that procedure was that per capita energy use and fuel mix is uniform over a political unit. The consequence of this first-order procedure is that the spatial changes observed over time are solely due to changes in national energy consumption and nation-based fuel mix. Increases in emissions over time are apparent for most areas.

  12. Interannual Variability in Global Soil Respiration on a 0.5 Degree Grid Cell Basis (1980-1994)

    SciTech Connect

    Raich, J.W.

    2003-09-15

    We used a climate-driven regression model to develop spatially resolved estimates of soil-CO{sub 2} emissions from the terrestrial land surface for each month from January 1980 to December 1994, to evaluate the effects of interannual variations in climate on global soil-to-atmosphere CO{sub 2} fluxes. The mean annual global soil-CO{sub 2} flux over this 15-y period was estimated to be 80.4 (range 79.3-81.8) Pg C. Monthly variations in global soil-CO{sub 2} emissions followed closely the mean temperature cycle of the Northern Hemisphere. Globally, soil-CO{sub 2} emissions reached their minima in February and peaked in July and August. Tropical and subtropical evergreen broad-leaved forests contributed more soil-derived CO{sub 2} to the atmosphere than did any other vegetation type ({approx}30% of the total) and exhibited a biannual cycle in their emissions. Soil-CO{sub 2} emissions in other biomes exhibited a single annual cycle that paralleled the seasonal temperature cycle. Interannual variability in estimated global soil-CO{sub 2} production is substantially less than is variability in net carbon uptake by plants (i.e., net primary productivity). Thus, soils appear to buffer atmospheric CO{sub 2} concentrations against far more dramatic seasonal and interannual differences in plant growth. Within seasonally dry biomes (savannas, bushlands, and deserts), interannual variability in soil-CO{sub 2} emissions correlated significantly with interannual differences in precipitation. At the global scale, however, annual soil-CO{sub 2} fluxes correlated with mean annual temperature, with a slope of 3.3 PgCY{sup -1} per degree Celsius. Although the distribution of precipitation influences seasonal and spatial patterns of soil-CO{sub 2} emissions, global warming is likely to stimulate CO{sub 2} emissions from soils.

  13. X1X1X2X2/X1X2Y sex chromosome systems in the Neotropical Gymnotiformes electric fish of the genus Brachyhypopomus.

    PubMed

    Cardoso, Adauto Lima; Pieczarka, Julio Cesar; Nagamachi, Cleusa Yoshiko

    2015-05-01

    Several types of sex chromosome systems have been recorded among Gymnotiformes, including male and female heterogamety, simple and multiple sex chromosomes, and different mechanisms of origin and evolution. The X1X1X2X2/X1X2Y systems identified in three species of this order are considered homoplasic for the group. In the genus Brachyhypopomus, only B. gauderio presented this type of system. Herein we describe the karyotypes of Brachyhypopomus pinnicaudatus and B. n. sp. FLAV, which have an X1X1X2X2/X1X2Y sex chromosome system that evolved via fusion between an autosome and the Y chromosome. The morphology of the chromosomes and the meiotic pairing suggest that the sex chromosomes of B. gauderio and B. pinnicaudatus have a common origin, whereas in B . n. sp. FLAV the sex chromosome system evolved independently. However, we cannot discard the possibility of common origin followed by distinct processes of differentiation. The identification of two new karyotypes with an X1X1X2X2/X1X2Y sex chromosome system in Gymnotiformes makes it the most common among the karyotyped species of the group. Comparisons of these karyotypes and the evolutionary history of the taxa indicate independent origins for their sex chromosomes systems. The recurrent emergence of the X1X1X2X2/X1X2Y system may represent sex chromosomes turnover events in Gymnotiformes. PMID:26273225

  14. Mass transport during step motion on the silicon(111) (1x1) surface studied by low energy electron microscopy

    NASA Astrophysics Data System (ADS)

    Pang, Angbo

    Atomic steps are common defects at surfaces that can play an important role in many physical phenomena. Step morphology will be affected, or even dictated, by the kinetic processes that mediate growth and its inverse, sublimation. At the same time, competing coarsening processes will occur that depend crucially upon the step line tension through the Gibbs-Thomson relation. A proper description of step morphological phenomena therefore requires accurate knowledge of step line tension, as well as step kinetic parameters. The complex interplay between step kinetic and coarsening effects was investigated on the Si(111) (1x1) surface by examining step motion during island decay using low energy electron microscopy. These investigations provide quantitative information on the step line tension, kinetic length and step permeability. It is shown that the line tension decreases linearly with increasing temperature between 1145 K and 1233 K with a temperature coefficient of .0.14 meV/A K. The kinetic length is determined to be 75a at 1163K, where a is the lattice constant. This locates step motion firmly in the diffusion-limited regime. Steps are also determined to be impermeable in the context of diffusion limited step kinetics. We also find that the role of desorption in island decay increases dramatically in the temperature range (1145--1380 K) that island decay is studied. Consequently, we generalize the current model of island decay to take account of desorption. Evaluation of the island decay time with this model referenced to the temperature-dependent line tension accurately determines activation energies that are central to mass transport and sublimation. Similar investigations of vacancy island decay were also carried out. Surprisingly, island decay and vacancy island decay behavior cannot be explained consistently using any form of model that treats mass transport exclusively in terms of the diffusion of adatoms that are generated at steps. An adatom-vacancy decay

  15. Exploring Hypersonic, Unstructured-Grid Issues through Structured Grids

    NASA Technical Reports Server (NTRS)

    Mazaheri, Ali R.; Kleb, Bill

    2007-01-01

    Pure-tetrahedral unstructured grids have been shown to produce asymmetric heat transfer rates for symmetric problems. Meanwhile, two-dimensional structured grids produce symmetric solutions and as documented here, introducing a spanwise degree of freedom to these structured grids also yields symmetric solutions. The effects of grid skewness and other perturbations of structured-grids are investigated to uncover possible mechanisms behind the unstructured-grid solution asymmetries. By using controlled experiments around a known, good solution, the effects of particular grid pathologies are uncovered. These structured-grid experiments reveal that similar solution degradation occurs as for unstructured grids, especially for heat transfer rates. Non-smooth grids within the boundary layer is also shown to produce large local errors in heat flux but do not affect surface pressures.

  16. ON JOINT DETERMINISTIC GRID MODELING AND SUB-GRID VARIABILITY CONCEPTUAL FRAMEWORK FOR MODEL EVALUATION

    EPA Science Inventory

    The general situation, (but exemplified in urban areas), where a significant degree of sub-grid variability (SGV) exists in grid models poses problems when comparing gridbased air quality modeling results with observations. Typically, grid models ignore or parameterize processes ...

  17. Rotational line intensities of the c4‧1Σu+(1)-X1Σg+(0-2) bands of N2

    NASA Astrophysics Data System (ADS)

    C.; Lavín | A., M.; | I., Velasco; Martín

    2010-02-01

    Oscillator strengths and integrated cross-sections for rotational lines of the c4'1Σu+(1)-X1Σg+(0-2) bands of N 2 have been calculated with the molecular quantum defect orbital (MQDO) method. The known strong homogeneous interaction of the c4'1Σu+(1) Rydberg state with the b' 1Σu+(4) valence state has been presently dealt with through an interaction matrix for each value of the rotational quantum number, J. Because of perturbations, the intensity distribution of the rotational lines within each of the vibronic bands deviates from the predictions based on Hönl-London factors. Band oscillator strengths are also reported and their J-dependence has been analyzed.

  18. Medium-energy ion-scattering study of the structure of clean TiO{sub 2}(110)-(1x1)

    SciTech Connect

    Parkinson, G. S.; Munoz-Marquez, M. A.; Quinn, P. D.; Gladys, M. J.; Tanner, R. E.; Woodruff, D. P.; Bailey, P.; Noakes, T. C. Q.

    2006-06-15

    100 keV H{sup +} medium-energy ion scattering has been applied to investigate the surface relaxations of the clean rutile TiO{sub 2}(110)-(1x1) surface structure. A set of blocking curves in four different incident directions show clear differences between the surface and bulk attributable to surface relaxation. Optimized values of the surface relaxation parameters to give the best fit to the surface structure are generally in quite good agreement with a recent experimental determination of this structure using quantitative low-energy electron diffraction. In particular, both solutions favor an outward relaxation of the bridging O atoms on the surface rather than the strong inward displacement favored by the only previous experimental structure determination based on surface x-ray diffraction.

  19. The SIM astronmetric grid

    NASA Technical Reports Server (NTRS)

    Swartz, R.

    2002-01-01

    The Space Interferometry Mission (SIM) is fundamentally a one-dimensional instrument with a 15-degree field-of-regard. Mission objectives require a global reference grid of thousands of well-understood stars with positions known to 4 microarcseconds which will be used to establish the instrument baseline vector during scientific observations. This accuracy will be achieved by frequently observing a set of stars throughout the mission and performing a global fit of the observations to determine position, proper motion and parallax for each star. Each star will be observed approximately 200 times with about 6.5 stars per single instrument field on the sky. We describe the nature of the reference grid, the candidate objects, and the results of simulations demonstrating grid performance, including estimates of the grid robustness when including effects such as instrument drift and possible contamination of the grid star sample by undetected binaries.

  20. Detection of subsurface core-level shifts in Si 2p core-level photoemission from Si(111)-(1x1):As

    SciTech Connect

    Paggel, J.J.; Hasselblatt, M.; Horn, K.

    1997-04-01

    The (7 x 7) reconstruction of the Si(111) surface arises from a lowering energy through the reduction of the number of dangling bonds. This reconstruction can be removed by the adsorption of atoms such as hydrogen which saturate the dangling bonds, or by the incorporation of atoms, such as arsenic which, because of the additional electron it possesses, can form three bonds and a nonreactive lone pair orbital from the remaining two electrons. Core and valence level photoemission and ion scattering data have shown that the As atoms replace the top silicon atoms. Previous core level spectra were interpreted in terms of a bulk and a single surface doublet. The authors present results demonstrate that the core level spectrum contains two more lines. The authors assign these to subsurface silicon layers which also experience changes in the charge distribution when a silicon atom is replaced by an arsenic atom. Subsurface core level shifts are not unexpected since the modifications of the electronic structure and/or of photohole screening are likely to decay into the bulk and not just to affect the top-most substrate atoms. The detection of subsurface components suggests that the adsorption of arsenic leads to charge flow also in the second double layer of the Si(111) surface. In view of the difference in atomic radius between As and Si, it was suggested that the (1 x 1): As surface is strained. The presence of charge rearrangement up to the second double layer implies that the atomic coordinates also exhibit deviations from their ideal Si(111) counterparts, which might be detected through a LEED I/V or photoelectron diffraction analysis.

  1. Grid Work

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Pointwise Inc.'s, Gridgen Software is a system for the generation of 3D (three dimensional) multiple block, structured grids. Gridgen is a visually-oriented, graphics-based interactive code used to decompose a 3D domain into blocks, distribute grid points on curves, initialize and refine grid points on surfaces and initialize volume grid points. Gridgen is available to U.S. citizens and American-owned companies by license.

  2. MAGNETIC GRID

    DOEpatents

    Post, R.F.

    1960-08-01

    An electronic grid is designed employing magnetic forces for controlling the passage of charged particles. The grid is particularly applicable to use in gas-filled tubes such as ignitrons. thyratrons, etc., since the magnetic grid action is impartial to the polarity of the charged particles and, accordingly. the sheath effects encountered with electrostatic grids are not present. The grid comprises a conductor having sections spaced apart and extending in substantially opposite directions in the same plane, the ends of the conductor being adapted for connection to a current source.

  3. The Grid

    SciTech Connect

    White, Vicky

    2003-05-21

    By now almost everyone has heard of 'The Grid', or 'Grid Computing' as it should more properly be described. There are frequent articles in both the popular and scientific press talking about 'The Grid' or about some specific Grid project. Run II Experiments, US-CMS, BTeV, the Sloane Digital Sky Survey and the Lattice QCD folks are all incorporating aspects of Grid Computing in their plans, and the Fermilab Computing Division is supporting and encouraging these efforts. Why are we doing this and what does it have to do with running a physics experiment or getting scientific results? I will explore some of these questions and try to give an overview, not so much of the technical aspects of Grid Computing, rather of what the phenomenon means for our field.

  4. Fibonacci Grids

    NASA Technical Reports Server (NTRS)

    Swinbank, Richard; Purser, James

    2006-01-01

    Recent years have seen a resurgence of interest in a variety of non-standard computational grids for global numerical prediction. The motivation has been to reduce problems associated with the converging meridians and the polar singularities of conventional regular latitude-longitude grids. A further impetus has come from the adoption of massively parallel computers, for which it is necessary to distribute work equitably across the processors; this is more practicable for some non-standard grids. Desirable attributes of a grid for high-order spatial finite differencing are: (i) geometrical regularity; (ii) a homogeneous and approximately isotropic spatial resolution; (iii) a low proportion of the grid points where the numerical procedures require special customization (such as near coordinate singularities or grid edges). One family of grid arrangements which, to our knowledge, has never before been applied to numerical weather prediction, but which appears to offer several technical advantages, are what we shall refer to as "Fibonacci grids". They can be thought of as mathematically ideal generalizations of the patterns occurring naturally in the spiral arrangements of seeds and fruit found in sunflower heads and pineapples (to give two of the many botanical examples). These grids possess virtually uniform and highly isotropic resolution, with an equal area for each grid point. There are only two compact singular regions on a sphere that require customized numerics. We demonstrate the practicality of these grids in shallow water simulations, and discuss the prospects for efficiently using these frameworks in three-dimensional semi-implicit and semi-Lagrangian weather prediction or climate models.

  5. Online Degrees.

    ERIC Educational Resources Information Center

    Dolezalek, Holly

    2003-01-01

    Discusses the trend of trainers who are getting degrees through online courses delivered via the Internet. Addresses accreditation issues and what to ask before enrolling in online degree programs. (JOW)

  6. Dishonorary Degrees

    ERIC Educational Resources Information Center

    Romano, Carlin

    2008-01-01

    If an honorary degree lacks values to begin with, does withdrawing it deliver a rebuke to the recipient? Is whatever honor that comes with the distinction embedded in the fancy paper, or is it wholly in the eye of the degree holder? Are honorary degrees really such silly things that individuals should mock their bestowal or withdrawal? The case of…

  7. Grid oscillators

    NASA Technical Reports Server (NTRS)

    Popovic, Zorana B.; Kim, Moonil; Rutledge, David B.

    1988-01-01

    Loading a two-dimensional grid with active devices offers a means of combining the power of solid-state oscillators in the microwave and millimeter-wave range. The grid structure allows a large number of negative resistance devices to be combined. This approach is attractive because the active devices do not require an external locking signal, and the combining is done in free space. In addition, the loaded grid is a planar structure amenable to monolithic integration. Measurements on a 25-MESFET grid at 9.7 GHz show power-combining and frequency-locking without an external locking signal, with an ERP of 37 W. Experimental far-field patterns agree with theoretical results obtained using reciprocity.

  8. Grid Computing

    NASA Astrophysics Data System (ADS)

    Foster, Ian

    2001-08-01

    The term "Grid Computing" refers to the use, for computational purposes, of emerging distributed Grid infrastructures: that is, network and middleware services designed to provide on-demand and high-performance access to all important computational resources within an organization or community. Grid computing promises to enable both evolutionary and revolutionary changes in the practice of computational science and engineering based on new application modalities such as high-speed distributed analysis of large datasets, collaborative engineering and visualization, desktop access to computation via "science portals," rapid parameter studies and Monte Carlo simulations that use all available resources within an organization, and online analysis of data from scientific instruments. In this article, I examine the status of Grid computing circa 2000, briefly reviewing some relevant history, outlining major current Grid research and development activities, and pointing out likely directions for future work. I also present a number of case studies, selected to illustrate the potential of Grid computing in various areas of science.

  9. AIRS Observations Based Evaluation of Relative Climate Feedback Strengths on a GCM Grid-Scale

    NASA Astrophysics Data System (ADS)

    Molnar, G. I.; Susskind, J.

    2012-12-01

    Climate feedback strengths, especially those associated with moist processes, still have a rather wide range in GCMs, the primary tools to predict future climate changes associated with man's ever increasing influences on our planet. Here, we make use of the first 10 years of AIRS observations to evaluate interrelationships/correlations of atmospheric moist parameter anomalies computed from AIRS Version 5 Level-3 products, and demonstrate their usefulness to assess relative feedback strengths. Although one may argue about the possible usability of shorter-term, observed climate parameter anomalies for estimating the strength of various (mostly moist processes related) feedbacks, recent works, in particular analyses by Dessler [2008, 2010], have demonstrated their usefulness in assessing global water vapor and cloud feedbacks. First, we create AIRS-observed monthly anomaly time-series (ATs) of outgoing longwave radiation, water vapor, clouds and temperature profile over a 10-year long (Sept. 2002 through Aug. 2012) period using 1x1 degree resolution (a common GCM grid-scale). Next, we evaluate the interrelationships of ATs of the above parameters with the corresponding 1x1 degree, as well as global surface temperature ATs. The latter provides insight comparable with more traditional climate feedback definitions (e. g., Zelinka and Hartmann, 2012) whilst the former is related to a new definition of "local (in surface temperature too) feedback strengths" on a GCM grid-scale. Comparing the correlation maps generated provides valuable new information on the spatial distribution of relative climate feedback strengths. We argue that for GCMs to be trusted for predicting longer-term climate variability, they should be able to reproduce these observed relationships/metrics as closely as possible. For this time period the main climate "forcing" was associated with the El Niño/La Niña variability (e. g., Dessler, 2010), so these assessments may not be descriptive of longer

  10. A systematic study of giant magnetoimpedance of Cr-substituted Fe 73.5-xCr xSi 13.5B 9Nb 3Au 1 ( x=1, 2, 3, 4, 5) alloys

    NASA Astrophysics Data System (ADS)

    Tho, N. D.; Chau, N.; Yu, S. C.; Lee, H. B.; The, N. D.; Hoa, N. Q.

    2006-09-01

    The magnetoimpedance of Fe 76.5-xCr xSi 13.5B 9Nb 3Au 1 ( x=1, 2, 3, 4, 5) alloys has been measured to investigate the influence of crystallization process on the soft magnetic properties and magnetic anisotropy after thermal treatment. Annealing performed at 540 and 550 °C for 30 min in a vacuum indicated that ultrasoft magnetic properties of nanocomposite materials are obtained. The magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) measurements show that the maximum values of MIR and PR increase drastically in the heat-treated samples. It means that the samples are softened by nanocrystallization. The PR curves become narrower and sharper due to the decrease of anisotropy. The MIR behavior related with the softness of magnetic properties of heat-treated samples and the incremental PR strongly changes with external magnetic field.

  11. Soft magnetic behaviour in amorphous and nanocrystalline Fe 73.5-xMn xSi 13.5B 9Nb 3Cu 1 ( x=1, 3, 5) alloys

    NASA Astrophysics Data System (ADS)

    Tho, N. D.; Chau, N.; Yu, S. C.; Lee, H. B.; Tuan, L. A.; Hoa, N. Q.

    2006-09-01

    Amorphous ribbons Fe 73.5-xMn xSi 13.5Nb 3Cu 1 ( x=1, 3, 5) were prepared by rapid quenching on a single rotated copper wheel. The X-ray patterns show that the as-cast samples are amorphous. The measurements of thermomagnetic curves indicated that the Curie temperature of the amorphous phase of the samples decreased with increasing Mn content. The optimal heat treatment was performed at Ta=535 °C for 1 h and showed that the ultrasoft magnetic properties of nanocomposite materials were obtained. The frequency dependence of magnetoimpedance was measured in the frequency range of 1-10 MHz and at a fixed current of 10 mA. The correlation between the MI effect and the soft magnetic properties is discussed.

  12. On imaging with or without grid in digital mammography

    NASA Astrophysics Data System (ADS)

    Chen, Han; Danielsson, Mats; Cederström, Björn

    2014-03-01

    The grids used in digital mammography to reduce scattered radiation from the breast are not perfect and lead to partial absorption of primary radiation at the same time as not all of the scattered radiation is absorbed. It has therefore lately been suggested to remove the grids and correct for effects of scattered radiation by post- processing the images. In this paper, we investigated the dose reduction that might be achieved if the gird were to be removed. Dose reduction is determined as a function of PMMA thickness by comparing the contrast-to-noise ratios (CNRs) of images acquired with and without grid at a constant exposure. We used a theoretical model validated with Monte Carlo simulations and phantom studies. To evaluate the CNR, we applied aluminum filters of two different sizes, 4x8 cm2 and 1x1 cm2. When the large Al filter was used, the resulting CNR value for the grid-less images was overestimated as a result of a difference in amount of scattered radiation in the background region and of the region covered by the filter, a difference that could be eliminated by selecting a region of interest close to the edge of the filter. The optimal CNR when the PMMA thickness was above about 4 cm was obtained with a grid, whereas removing the grid leaded to a dose saving in thinner PMMAs. The results suggest not removing grids in breast cancer screening.

  13. GridMan: A grid manipulation system

    NASA Technical Reports Server (NTRS)

    Eiseman, Peter R.; Wang, Zhu

    1992-01-01

    GridMan is an interactive grid manipulation system. It operates on grids to produce new grids which conform to user demands. The input grids are not constrained to come from any particular source. They may be generated by algebraic methods, elliptic methods, hyperbolic methods, parabolic methods, or some combination of methods. The methods are included in the various available structured grid generation codes. These codes perform the basic assembly function for the various elements of the initial grid. For block structured grids, the assembly can be quite complex due to a large number of clock corners, edges, and faces for which various connections and orientations must be properly identified. The grid generation codes are distinguished among themselves by their balance between interactive and automatic actions and by their modest variations in control. The basic form of GridMan provides a much more substantial level of grid control and will take its input from any of the structured grid generation codes. The communication link to the outside codes is a data file which contains the grid or section of grid.

  14. Interactive grid generation program for CAP-TSD

    NASA Technical Reports Server (NTRS)

    Bland, Samuel R.

    1990-01-01

    A grid generation program for use with the CAP-TSD transonic small disturbance code is described. The program runs interactively in FORTRAN on the Sun Workstation. A fifth-degree polynomial is used to map the grid index onto the computational coordinate. The grid is plotted to aid in the assessment of its quality and may be saved on file in NAMELIST format.

  15. Scientific Computing on the Grid

    SciTech Connect

    Allen, Gabrielle; Seidel, Edward; Shalf, John

    2001-12-12

    Computer simulations are becoming increasingly important as the only means for studying and interpreting the complex processes of nature. Yet the scope and accuracy of these simulations are severely limited by available computational power, even using today's most powerful supercomputers. As we endeavor to simulate the true complexity of nature, we will require much larger scale calculations than are possible at present. Such dynamic and large scale applications will require computational grids and grids require development of new latency tolerant algorithms, and sophisticated code frameworks like Cactus to carry out more complex and high fidelity simulations with a massive degree of parallelism.

  16. Nurbs and grid generation

    SciTech Connect

    Barnhill, R.E.; Farin, G.; Hamann, B.

    1995-12-31

    This paper provides a basic overview of NURBS and their application to numerical grid generation. Curve/surface smoothing, accelerated grid generation, and the use of NURBS in a practical grid generation system are discussed.

  17. Data Grid Management Systems

    NASA Technical Reports Server (NTRS)

    Moore, Reagan W.; Jagatheesan, Arun; Rajasekar, Arcot; Wan, Michael; Schroeder, Wayne

    2004-01-01

    The "Grid" is an emerging infrastructure for coordinating access across autonomous organizations to distributed, heterogeneous computation and data resources. Data grids are being built around the world as the next generation data handling systems for sharing, publishing, and preserving data residing on storage systems located in multiple administrative domains. A data grid provides logical namespaces for users, digital entities and storage resources to create persistent identifiers for controlling access, enabling discovery, and managing wide area latencies. This paper introduces data grids and describes data grid use cases. The relevance of data grids to digital libraries and persistent archives is demonstrated, and research issues in data grids and grid dataflow management systems are discussed.

  18. Vertical grid of retrieved atmospheric profiles

    NASA Astrophysics Data System (ADS)

    Ceccherini, Simone; Carli, Bruno; Raspollini, Piera

    2016-05-01

    The choice of the vertical grid of atmospheric profiles retrieved from remote sensing observations is discussed considering the two cases of profiles used to represent the results of individual measurements and of profiles used for subsequent data fusion applications. An ozone measurement of the MIPAS instrument is used to assess, for different vertical grids, the quality of the retrieved profiles in terms of profile values, retrieval errors, vertical resolutions and number of degrees of freedom. In the case of individual retrievals no evident advantage is obtained with the use of a grid finer than the one with a reduced number of grid points, which are optimized according to the information content of the observations. Nevertheless, this instrument dependent vertical grid, which seems to extract all the available information, provides very poor results when used for data fusion applications. A loss of about a quarter of the degrees of freedom is observed when the data fusion is made using the instrument dependent vertical grid relative to the data fusion made using a vertical grid optimized for the data fusion product. This result is explained by the analysis of the eigenvalues of the Fisher information matrix and leads to the conclusion that different vertical grids must be adopted when data fusion is the expected application.

  19. Room temperature photo-oxidation of NH{sub 4}F-prepared H-Si(111)(1x1) and H{sub x}-Si(100)

    SciTech Connect

    Morse, Kathleen A.; Pianetta, Piero

    2004-12-01

    This work discusses the room temperature photo-oxidation of hydrogen-passivated silicon surfaces. Specifically, photoemission spectroscopy is used to investigate how the factors present in cleanrooms, including ultraviolet (UV) light, oxygen (O{sub 2}), and water (H{sub 2}O), lead to the photo-oxidation of the hydrogen-passivated silicon surface. Results indicate that both the H-Si(111)(1x1) and H{sub x}-Si(100) surfaces oxidize when exposed to UV light in the presence of O{sub 2} only, H{sub 2}O only, or humid air (both O{sub 2} and H{sub 2}O). We propose that UV light assists in the photo-oxidation of the hydrogen-terminated silicon surfaces by cleaving the H-Si surface bond. This process generates silicon surface radicals that can then be scavenged by either O{sub 2} to form peroxyl radicals (Si-O-O{center_dot}) or by H{sub 2}O to form silanols (Si-OH). Results also show that photo-oxidation is most significant when the surface is exposed to both O{sub 2} and H{sub 2}O in the presence of UV light. Results from the humid air photo-oxidation experiments indicate that after the H-Si surface bond is cleaved by UV light, H{sub 2}O reacts with the generated silicon surface radical to form a silanol. This is followed by a subsequent step involving UV light and O{sub 2}.

  20. Spatial services grid

    NASA Astrophysics Data System (ADS)

    Cao, Jian; Li, Qi; Cheng, Jicheng

    2005-10-01

    This paper discusses the concept, key technologies and main application of Spatial Services Grid. The technologies of Grid computing and Webservice is playing a revolutionary role in studying the spatial information services. The concept of the SSG (Spatial Services Grid) is put forward based on the SIG (Spatial Information Grid) and OGSA (open grid service architecture). Firstly, the grid computing is reviewed and the key technologies of SIG and their main applications are reviewed. Secondly, the grid computing and three kinds of SIG (in broad sense)--SDG (spatial data grid), SIG (spatial information grid) and SSG (spatial services grid) and their relationships are proposed. Thirdly, the key technologies of the SSG (spatial services grid) is put forward. Finally, three representative applications of SSG (spatial services grid) are discussed. The first application is urban location based services gird, which is a typical spatial services grid and can be constructed on OGSA (Open Grid Services Architecture) and digital city platform. The second application is region sustainable development grid which is the key to the urban development. The third application is Region disaster and emergency management services grid.

  1. Interlocking egg-crate type grid assembly

    SciTech Connect

    Kast, Steven J.

    1987-01-01

    Disclosed is an interlocking egg-crate hexagonal grid for supporting a nuclear fuel pin in a hexagonal array. The grid is formed from strips bent at an angle of about 120.degree. at each vertex. Over some faces of each hexagonal cell the strips are coplanar but are arranged, by stacking and interlocking, to avoid any double thickness of metal in that plane. Springs and dimples are formed in the faces of each cell to hold the fuel pin substantially centered.

  2. Hybrid Grid Generation Using NW Grid

    SciTech Connect

    Jones-Oliveira, Janet B.; Oliveira, Joseph S.; Trease, Lynn L.; Trease, Harold E.; B.K. Soni, J. Hauser, J.F. Thompson, P.R. Eiseman

    2000-09-01

    We describe the development and use of a hybrid n-dimensional grid generation system called NWGRID. The Applied Mathematics Group at Pacific Northwest National Laboratory (PNNL) is developing this tool to support the Laboratory's computational science efforts in chemistry, biology, engineering and environmental (subsurface and atmospheric) modeling. NWGRID is the grid generation system, which is designed for multi-scale, multi-material, multi-physics, time-dependent, 3-D, hybrid grids that are either statically adapted or evolved in time. NWGRID'S capabilities include static and dynamic grids, hybrid grids, managing colliding surfaces, and grid optimization[using reconnections, smoothing, and adaptive mesh refinement (AMR) algorithms]. NWGRID'S data structure can manage an arbitrary number of grid objects, each with an arbitrary number of grid attributes. NWGRID uses surface geometry to build volumes by using combinations of Boolean operators and order relations. Point distributions can be input, generated using either ray shooting techniques or defined point-by-point. Connectivity matrices are then generated automatically for all variations of hybrid grids.

  3. Parallel grid population

    DOEpatents

    Wald, Ingo; Ize, Santiago

    2015-07-28

    Parallel population of a grid with a plurality of objects using a plurality of processors. One example embodiment is a method for parallel population of a grid with a plurality of objects using a plurality of processors. The method includes a first act of dividing a grid into n distinct grid portions, where n is the number of processors available for populating the grid. The method also includes acts of dividing a plurality of objects into n distinct sets of objects, assigning a distinct set of objects to each processor such that each processor determines by which distinct grid portion(s) each object in its distinct set of objects is at least partially bounded, and assigning a distinct grid portion to each processor such that each processor populates its distinct grid portion with any objects that were previously determined to be at least partially bounded by its distinct grid portion.

  4. Blue-noise halftoning for hexagonal grids.

    PubMed

    Lau, Daniel L; Ulichney, Robert

    2006-05-01

    In this paper, we closely scrutinize the spatial and spectral properties of aperiodic halftoning schemes on rectangular and hexagonal sampling grids. Traditionally, hexagonal sampling grids have been shunned due to their inability to preserve the high-frequency components of blue-noise dither patterns at gray-levels near one-half, but as will be shown, only through the introduction of diagonal correlations between dots can even rectangular sampling grids preserve these frequencies. And by allowing the sampling grid to constrain the placement of dots, a particular algorithm may introduce visual artifacts just as disturbing as excess energy below the principal frequency. If, instead, the algorithm maintains radial symmetry by introducing a minimum degree of clustering, then that algorithm can maintain its grid defiance illusion fundamental to the spirit of the blue-noise model. As such, this paper shows that hexagonal grids are preferrable because they can support gray-levels near one-half with less required clustering of minority pixels and a higher principal frequency. Along with a thorough Fourier analysis of blue-noise dither patterns on both rectangular and hexagonal sampling grids, this paper also demonstrates the construction of a blue-noise dither array for hexagonal grids. PMID:16671307

  5. Method of grid generation

    DOEpatents

    Barnette, Daniel W.

    2002-01-01

    The present invention provides a method of grid generation that uses the geometry of the problem space and the governing relations to generate a grid. The method can generate a grid with minimized discretization errors, and with minimal user interaction. The method of the present invention comprises assigning grid cell locations so that, when the governing relations are discretized using the grid, at least some of the discretization errors are substantially zero. Conventional grid generation is driven by the problem space geometry; grid generation according to the present invention is driven by problem space geometry and by governing relations. The present invention accordingly can provide two significant benefits: more efficient and accurate modeling since discretization errors are minimized, and reduced cost grid generation since less human interaction is required.

  6. Dynamic Power Grid Simulation

    2015-09-14

    GridDyn is a part of power grid simulation toolkit. The code is designed using modern object oriented C++ methods utilizing C++11 and recent Boost libraries to ensure compatibility with multiple operating systems and environments.

  7. A 10-year global gridded Aerosol Optical Thickness Reanalysis for climate and applied applications

    NASA Astrophysics Data System (ADS)

    Lynch, P.; Reid, J. S.; Zhang, J.; Westphal, D. L.; Campbell, J. R.; Curtis, C. A.; Hegg, D.; Hyer, E. J.; Sessions, W.; Shi, Y.; Turk, J.

    2013-12-01

    While standalone satellite and model aerosol products see wide utilization, there is a significant need of a best-available fused product on a regular grid for numerous climate and applied applications. Remote sensing and modeling technologies have now advanced to a point where aerosol data assimilation is an operational reality at numerous centers. It is inevitable that, like meteorological reanalyses, aerosol reanalyses will see heavy use in the near future. A first long term, 2003-2012 global 1x1 degree and 6-hourly aerosol optical thickness (AOT) reanalysis product has been generated. The goal of this effort is not only for climate applications, but to generate a dataset that can be used by the US Navy to understand operationally hindering aerosol events, aerosol impacts on numerical weather prediction, and application of electro-optical technologies. The reanalysis utilizes Navy Aerosol Analysis and Prediction System (NAAPS) at its core and assimilates quality controlled collection 5 Moderate Resolution Imaging Spectroradiometer (MODIS) AOD with minor corrections from Multi-angle Imaging SpectroRaditometer (MISR). A subset of this product includes Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) lidar assimilation since its launch in mid-2006. Surface aerosol sources, including dust and smoke, in the aerosol model have been regionally tuned so that fine and coarse mode AOTs best match those resolve by ground-based Aerosol Robotic Network (AERONET). The AOT difference between the model and satellite AOT is then used to adjust other aerosol processes, eg., sources, dry deposition, etc. Aerosol wet deposition is constrained with satellite-retrieved precipitation. The final AOT reanalysis is shown to exhibit good agreement with AERONET. Here we review the development of the reanalysis and consider issues particular to aerosol reanalyses that make them distinct from standard meteorological reanalyses. Considerations are also made for extending such work

  8. IPG Power Grid Overview

    NASA Technical Reports Server (NTRS)

    Hinke, Thomas

    2003-01-01

    This presentation will describe what is meant by grids and then cover the current state of the IPG. This will include an overview of the middleware that is key to the operation of the grid. The presentation will then describe some of the future directions that are planned for the IPG. Finally the presentation will conclude with a brief overview of the Global Grid Forum, which is a key activity that will contribute to the successful availability of grid components.

  9. Chimera Grid Tools

    NASA Technical Reports Server (NTRS)

    Chan, William M.; Rogers, Stuart E.; Nash, Steven M.; Buning, Pieter G.; Meakin, Robert

    2005-01-01

    Chimera Grid Tools (CGT) is a software package for performing computational fluid dynamics (CFD) analysis utilizing the Chimera-overset-grid method. For modeling flows with viscosity about geometrically complex bodies in relative motion, the Chimera-overset-grid method is among the most computationally cost-effective methods for obtaining accurate aerodynamic results. CGT contains a large collection of tools for generating overset grids, preparing inputs for computer programs that solve equations of flow on the grids, and post-processing of flow-solution data. The tools in CGT include grid editing tools, surface-grid-generation tools, volume-grid-generation tools, utility scripts, configuration scripts, and tools for post-processing (including generation of animated images of flows and calculating forces and moments exerted on affected bodies). One of the tools, denoted OVERGRID, is a graphical user interface (GUI) that serves to visualize the grids and flow solutions and provides central access to many other tools. The GUI facilitates the generation of grids for a new flow-field configuration. Scripts that follow the grid generation process can then be constructed to mostly automate grid generation for similar configurations. CGT is designed for use in conjunction with a computer-aided-design program that provides the geometry description of the bodies, and a flow-solver program.

  10. Grid Architecture 2

    SciTech Connect

    Taft, Jeffrey D.

    2016-01-01

    The report describes work done on Grid Architecture under the auspices of the Department of Electricity Office of Electricity Delivery and Reliability in 2015. As described in the first Grid Architecture report, the primary purpose of this work is to provide stakeholder insight about grid issues so as to enable superior decision making on their part. Doing this requires the creation of various work products, including oft-times complex diagrams, analyses, and explanations. This report provides architectural insights into several important grid topics and also describes work done to advance the science of Grid Architecture as well.

  11. FermiGrid

    SciTech Connect

    Yocum, D.R.; Berman, E.; Canal, P.; Chadwick, K.; Hesselroth, T.; Garzoglio, G.; Levshina, T.; Sergeev, V.; Sfiligoi, I.; Sharma, N.; Timm, S.; /Fermilab

    2007-05-01

    As one of the founding members of the Open Science Grid Consortium (OSG), Fermilab enables coherent access to its production resources through the Grid infrastructure system called FermiGrid. This system successfully provides for centrally managed grid services, opportunistic resource access, development of OSG Interfaces for Fermilab, and an interface to the Fermilab dCache system. FermiGrid supports virtual organizations (VOs) including high energy physics experiments (USCMS, MINOS, D0, CDF, ILC), astrophysics experiments (SDSS, Auger, DES), biology experiments (GADU, Nanohub) and educational activities.

  12. Top 100 Degree Producers.

    ERIC Educational Resources Information Center

    Borden, Victor M. H.

    2000-01-01

    Lists institutions of higher education that confer the most postsecondary degrees to students of color. Tables are provided for associate degrees (all minorities); baccalaureate degrees (all minorities); baccalaureate degrees for African Americans, American Indian, Asian American, and Hispanic; and baccalaureate degrees by subject area and…

  13. Understanding The Smart Grid

    SciTech Connect

    2007-11-15

    The report provides an overview of what the Smart Grid is and what is being done to define and implement it. The electric industry is preparing to undergo a transition from a centralized, producer-controlled network to a decentralized, user-interactive one. Not only will the technology involved in the electric grid change, but the entire business model of the industry will change too. A major objective of the report is to identify the changes that the Smart Grid will bring about so that industry participants can be prepared to face them. A concise overview of the development of the Smart Grid is provided. It presents an understanding of what the Smart Grid is, what new business opportunities or risks might come about due to its introduction, and what activities are already taking place regarding defining or implementing the Smart Grid. This report will be of interest to the utility industry, energy service providers, aggregators, and regulators. It will also be of interest to home/building automation vendors, information technology vendors, academics, consultants, and analysts. The scope of the report includes an overview of the Smart Grid which identifies the main components of the Smart Grid, describes its characteristics, and describes how the Smart Grid differs from the current electric grid. The overview also identifies the key concepts involved in the transition to the Smart Grid and explains why a Smart Grid is needed by identifying the deficiencies of the current grid and the need for new investment. The report also looks at the impact of the Smart Grid, identifying other industries which have gone through a similar transition, identifying the overall benefits of the Smart Grid, and discussing the impact of the Smart Grid on industry participants. Furthermore, the report looks at current activities to implement the Smart Grid including utility projects, industry collaborations, and government initiatives. Finally, the report takes a look at key technology

  14. Grid quality improvement by a grid adaptation technique

    NASA Technical Reports Server (NTRS)

    Lee, K. D.; Henderson, T. L.; Choo, Y. K.

    1991-01-01

    A grid adaptation technique is presented which improves grid quality. The method begins with an assessment of grid quality by defining an appropriate grid quality measure. Then, undesirable grid properties are eliminated by a grid-quality-adaptive grid generation procedure. The same concept has been used for geometry-adaptive and solution-adaptive grid generation. The difference lies in the definition of the grid control sources; here, they are extracted from the distribution of a particular grid property. Several examples are presented to demonstrate the versatility and effectiveness of the method.

  15. Navigation in Grid Space with the NAS Grid Benchmarks

    NASA Technical Reports Server (NTRS)

    Frumkin, Michael; Hood, Robert; Biegel, Bryan A. (Technical Monitor)

    2002-01-01

    We present a navigational tool for computational grids. The navigational process is based on measuring the grid characteristics with the NAS Grid Benchmarks (NGB) and using the measurements to assign tasks of a grid application to the grid machines. The tool allows the user to explore the grid space and to navigate the execution at a grid application to minimize its turnaround time. We introduce the notion of gridscape as a user view of the grid and show how it can be me assured by NGB, Then we demonstrate how the gridscape can be used with two different schedulers to navigate a grid application through a rudimentary grid.

  16. Grid enabled Service Support Environment - SSE Grid

    NASA Astrophysics Data System (ADS)

    Goor, Erwin; Paepen, Martine

    2010-05-01

    The SSEGrid project is an ESA/ESRIN project which started in 2009 and is executed by two Belgian companies, Spacebel and VITO, and one Dutch company, Dutch Space. The main project objectives are the introduction of a Grid-based processing on demand infrastructure at the Image Processing Centre for earth observation products at VITO and the inclusion of Grid processing services in the Service Support Environment (SSE) at ESRIN. The Grid-based processing on demand infrastructure is meant to support a Grid processing on demand model for Principal Investigators (PI) and allow the design and execution of multi-sensor applications with geographically spread data while minimising the transfer of huge volumes of data. In the first scenario, 'support a Grid processing on demand model for Principal Investigators', we aim to provide processing power close to the EO-data at the processing and archiving centres. We will allow a PI (non-Grid expert user) to upload his own algorithm, as a process, and his own auxiliary data from the SSE Portal and use them in an earth observation workflow on the SSEGrid Infrastructure. The PI can design and submit workflows using his own processes, processes made available by VITO/ESRIN and possibly processes from other users that are available on the Grid. These activities must be user-friendly and not requiring detailed knowledge about the underlying Grid middleware. In the second scenario we aim to design, implement and demonstrate a methodology to set up an earth observation processing facility, which uses large volumes of data from various geographically spread sensors. The aim is to provide solutions for problems that we face today, like wasting bandwidth by copying large volumes of data to one location. We will avoid this by processing the data where they are. The multi-mission Grid-based processing on demand infrastructure will allow developing and executing complex and massive multi-sensor data (re-)processing applications more

  17. Securing smart grid technology

    NASA Astrophysics Data System (ADS)

    Chaitanya Krishna, E.; Kosaleswara Reddy, T.; Reddy, M. YogaTeja; Reddy G. M., Sreerama; Madhusudhan, E.; AlMuhteb, Sulaiman

    2013-03-01

    In the developing countries electrical energy is very important for its all-round improvement by saving thousands of dollars and investing them in other sector for development. For Growing needs of power existing hierarchical, centrally controlled grid of the 20th Century is not sufficient. To produce and utilize effective power supply for industries or people we should have Smarter Electrical grids that address the challenges of the existing power grid. The Smart grid can be considered as a modern electric power grid infrastructure for enhanced efficiency and reliability through automated control, high-power converters, modern communications infrastructure along with modern IT services, sensing and metering technologies, and modern energy management techniques based on the optimization of demand, energy and network availability and so on. The main objective of this paper is to provide a contemporary look at the current state of the art in smart grid communications as well as critical issues on smart grid technologies primarily in terms of information and communication technology (ICT) issues like security, efficiency to communications layer field. In this paper we propose new model for security in Smart Grid Technology that contains Security Module(SM) along with DEM which will enhance security in Grid. It is expected that this paper will provide a better understanding of the technologies, potential advantages and research challenges of the smart grid and provoke interest among the research community to further explore this promising research area.

  18. Solar cell grid patterns

    NASA Technical Reports Server (NTRS)

    Yasui, R. K.; Berman, P. A. (Inventor)

    1976-01-01

    A grid pattern is described for a solar cell of the type which includes a semiconductive layer doped to a first polarity and a top counter-doped layer. The grid pattern comprises a plurality of concentric conductive grids of selected geometric shapes which are centered about the center of the exposed active surface of the counter-doped layer. Connected to the grids is one or more conductors which extend to the cell's periphery. For the pattern area, the grids and conductors are arranged in the pattern to minimize the maximum distance which any injected majority carriers have to travel to reach any of the grids or conductors. The pattern has a multiaxes symmetry with respect to the cell center to minimize the maximum temperature differentials between points on the cell surface and to provide a more uniform temperature distribution across the cell face.

  19. Degree variances of the earth's potential, topography and its isostatic compensation

    NASA Technical Reports Server (NTRS)

    Rapp, R. H.

    1982-01-01

    A spherical harmonic expansion of the earth's gravitational potential and equivalent rock topography to degree and order 180 is described. The potential implied by the topography considered as uncompensated and with isostatic compensation has been computed. Good agreement with the observed potential field is found when the depth of compensation in the Airy theory is assumed to be 50 km. At the higher degrees the correlation coefficient between the potential expansion and the equivalent rock topography is about 0.5. The Lachapelle equations for the topographic isostatic potential were tested using 1 x 1 deg equivalent rock topography. The degree variances agree at the lower degrees but at degree 36 the Lachapelle results using 5 deg data underestimate the potential degree variances by about one-third.

  20. Enhanced Elliptic Grid Generation

    NASA Technical Reports Server (NTRS)

    Kaul, Upender K.

    2007-01-01

    An enhanced method of elliptic grid generation has been invented. Whereas prior methods require user input of certain grid parameters, this method provides for these parameters to be determined automatically. "Elliptic grid generation" signifies generation of generalized curvilinear coordinate grids through solution of elliptic partial differential equations (PDEs). Usually, such grids are fitted to bounding bodies and used in numerical solution of other PDEs like those of fluid flow, heat flow, and electromagnetics. Such a grid is smooth and has continuous first and second derivatives (and possibly also continuous higher-order derivatives), grid lines are appropriately stretched or clustered, and grid lines are orthogonal or nearly so over most of the grid domain. The source terms in the grid-generating PDEs (hereafter called "defining" PDEs) make it possible for the grid to satisfy requirements for clustering and orthogonality properties in the vicinity of specific surfaces in three dimensions or in the vicinity of specific lines in two dimensions. The grid parameters in question are decay parameters that appear in the source terms of the inhomogeneous defining PDEs. The decay parameters are characteristic lengths in exponential- decay factors that express how the influences of the boundaries decrease with distance from the boundaries. These terms govern the rates at which distance between adjacent grid lines change with distance from nearby boundaries. Heretofore, users have arbitrarily specified decay parameters. However, the characteristic lengths are coupled with the strengths of the source terms, such that arbitrary specification could lead to conflicts among parameter values. Moreover, the manual insertion of decay parameters is cumbersome for static grids and infeasible for dynamically changing grids. In the present method, manual insertion and user specification of decay parameters are neither required nor allowed. Instead, the decay parameters are

  1. A grid amplifier

    NASA Technical Reports Server (NTRS)

    Kim, Moonil; Weikle, Robert M., II; Hacker, Jonathan B.; Delisio, Michael P.; Rutledge, David B.; Rosenberg, James J.; Smith, R. P.

    1991-01-01

    A 50-MESFET grid amplifier is reported that has a gain of 11 dB at 3.3 GHz. The grid isolates the input from the output by using vertical polarization for the input beam and horizontal polarization for the transmitted output beam. The grid unit cell is a two-MESFET differential amplifier. A simple calibration procedure allows the gain to be calculated from a relative power measurement. This grid is a hybrid circuit, but the structure is suitable for fabrication as a monolithic wafer-scale integrated circuit, particularly at millimeter wavelengths.

  2. Challenges facing production grids

    SciTech Connect

    Pordes, Ruth; /Fermilab

    2007-06-01

    Today's global communities of users expect quality of service from distributed Grid systems equivalent to that their local data centers. This must be coupled to ubiquitous access to the ensemble of processing and storage resources across multiple Grid infrastructures. We are still facing significant challenges in meeting these expectations, especially in the underlying security, a sustainable and successful economic model, and smoothing the boundaries between administrative and technical domains. Using the Open Science Grid as an example, I examine the status and challenges of Grids operating in production today.

  3. School Finance and Technology: A Case Study Using Grid and Group Theory to Explore the Connections

    ERIC Educational Resources Information Center

    Case, Stephoni; Harris, Edward L.

    2014-01-01

    Using grid and group theory (Douglas 1982, 2011), the study described in this article examined the intersections of technology and school finance in four schools located in districts differing in size, wealth, and commitment to technology integration. In grid and group theory, grid refers to the degree to which policies and role prescriptions…

  4. Geometric grid generation

    NASA Technical Reports Server (NTRS)

    Ives, David

    1995-01-01

    This paper presents a highly automated hexahedral grid generator based on extensive geometrical and solid modeling operations developed in response to a vision of a designer-driven one day turnaround CFD process which implies a designer-driven one hour grid generation process.

  5. Internet 2 Access Grid.

    ERIC Educational Resources Information Center

    Simco, Greg

    2002-01-01

    Discussion of the Internet 2 Initiative, which is based on collaboration among universities, businesses, and government, focuses on the Access Grid, a Computational Grid that includes interactive multimedia within high-speed networks to provide resources to enable remote collaboration among the research community. (Author/LRW)

  6. Security for grids

    SciTech Connect

    Humphrey, Marty; Thompson, Mary R.; Jackson, Keith R.

    2005-08-14

    Securing a Grid environment presents a distinctive set of challenges. This paper groups the activities that need to be secured into four categories: naming and authentication; secure communication; trust, policy, and authorization; and enforcement of access control. It examines the current state of the art in securing these processes and introduces new technologies that promise to meet the security requirements of Grids more completely.

  7. Data Grid Implementations

    SciTech Connect

    Moore, Reagan W.; Studham, Ronald S.; Rajasekar, Arcot; Watson, Chip; Stockinger, Heinz; Kunszt, Peter; Charlie Catlett and Ian Foster

    2002-02-27

    Data grids link distributed, heterogeneous storage resources into a coherent data management system. From a user perspective, the data grid provides a uniform name space across the underlying storage systems, while supporting retrieval and storage of files. In the high energy physics community, at least six data grids have been implemented for the storage and distribution of experimental data. Data grids are also being used to support projects as diverse as digital libraries (National Library of Medicine Visible Embryo project), federation of multiple astronomy sky surveys (NSF National Virtual Observatory project), and integration of distributed data sets (Long Term Ecological Reserve). Data grids also form the core interoperability mechanisms for creating persistent archives, in which data collections are migrated to new technologies over time. The ability to provide a uniform name space across multiple administration domains is becoming a critical component of national-scale, collaborative projects.

  8. Optimization Of A Computational Grid

    NASA Technical Reports Server (NTRS)

    Pearce, Daniel G.

    1993-01-01

    In improved method of generation of computational grid, grid-generation process decoupled from definition of geometry. Not necessary to redefine boundary. Instead, continuous boundaries in physical domain specified, and then grid points in computational domain mapped onto continuous boundaries.

  9. Top 100 Degree Producers.

    ERIC Educational Resources Information Center

    Black Issues in Higher Education, 2001

    2001-01-01

    Provides data on bachelor's degrees awarded to minority students in 1999-2000. Tables include total minority degrees and degrees awarded to African Americans, American Indians, Asian Americans, and Hispanics by type of school (uses Carnegie classification). Another table presents top disciplines by race/ethnicity. (EV)

  10. Associate Degree Preferred.

    ERIC Educational Resources Information Center

    Parnell, Dale, Ed.

    Designed to encourage dialogue and inform decision making about the associate degree, this book presents perspectives on the role of the associate degree in the nation's two-year colleges. First, "Toward a Greater Degree: A Plan of Action," by Dale Parnell, suggests a plan for preserving and enhancing the value of the education being provided by…

  11. Growing degree day calculator

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Degree-day benchmarks indicate discrete biological events in the development of insect pests. For the Sparganothis fruitworm, we have isolated all key development events and linked them to degree-day accumulations. These degree-day accumulations can greatly improve treatment timings for cranberry IP...

  12. Decentral Smart Grid Control

    NASA Astrophysics Data System (ADS)

    Schäfer, Benjamin; Matthiae, Moritz; Timme, Marc; Witthaut, Dirk

    2015-01-01

    Stable operation of complex flow and transportation networks requires balanced supply and demand. For the operation of electric power grids—due to their increasing fraction of renewable energy sources—a pressing challenge is to fit the fluctuations in decentralized supply to the distributed and temporally varying demands. To achieve this goal, common smart grid concepts suggest to collect consumer demand data, centrally evaluate them given current supply and send price information back to customers for them to decide about usage. Besides restrictions regarding cyber security, privacy protection and large required investments, it remains unclear how such central smart grid options guarantee overall stability. Here we propose a Decentral Smart Grid Control, where the price is directly linked to the local grid frequency at each customer. The grid frequency provides all necessary information about the current power balance such that it is sufficient to match supply and demand without the need for a centralized IT infrastructure. We analyze the performance and the dynamical stability of the power grid with such a control system. Our results suggest that the proposed Decentral Smart Grid Control is feasible independent of effective measurement delays, if frequencies are averaged over sufficiently large time intervals.

  13. The DESY Grid Centre

    NASA Astrophysics Data System (ADS)

    Haupt, A.; Gellrich, A.; Kemp, Y.; Leffhalm, K.; Ozerov, D.; Wegner, P.

    2012-12-01

    DESY is one of the world-wide leading centers for research with particle accelerators, synchrotron light and astroparticles. DESY participates in LHC as a Tier-2 center, supports on-going analyzes of HERA data, is a leading partner for ILC, and runs the National Analysis Facility (NAF) for LHC and ILC in the framework of the Helmholtz Alliance, Physics at the Terascale. For the research with synchrotron light major new facilities are operated and built (FLASH, PETRA-III, and XFEL). DESY furthermore acts as Data-Tier1 centre for the Neutrino detector IceCube. Established within the EGI-project DESY operates a grid infrastructure which supports a number of virtual Organizations (VO), incl. ATLAS, CMS, and LHCb. Furthermore, DESY hosts some of HEP and non-HEP VOs, such as the HERA experiments and ILC as well as photon science communities. The support of the new astroparticle physics VOs IceCube and CTA is currently set up. As the global structure of the grid offers huge resources which are perfect for batch-like computing, DESY has set up the National Analysis Facility (NAF) which complements the grid to allow German HEP users for efficient data analysis. The grid infrastructure and the NAF use the same physics data which is distributed via the grid. We call the conjunction of grid and NAF the DESY Grid Centre. In the contribution to CHEP2012 we will in depth discuss the conceptional and operational aspects of our multi-VO and multi-community Grid Centre and present the system setup. We will in particular focus on the interplay of Grid and NAF and present experiences of the operations.

  14. Trends in life science grid: from computing grid to knowledge grid

    PubMed Central

    Konagaya, Akihiko

    2006-01-01

    Background Grid computing has great potential to become a standard cyberinfrastructure for life sciences which often require high-performance computing and large data handling which exceeds the computing capacity of a single institution. Results This survey reviews the latest grid technologies from the viewpoints of computing grid, data grid and knowledge grid. Computing grid technologies have been matured enough to solve high-throughput real-world life scientific problems. Data grid technologies are strong candidates for realizing "resourceome" for bioinformatics. Knowledge grids should be designed not only from sharing explicit knowledge on computers but also from community formulation for sharing tacit knowledge among a community. Conclusion Extending the concept of grid from computing grid to knowledge grid, it is possible to make use of a grid as not only sharable computing resources, but also as time and place in which people work together, create knowledge, and share knowledge and experiences in a community. PMID:17254294

  15. Grid Computing Education Support

    SciTech Connect

    Steven Crumb

    2008-01-15

    The GGF Student Scholar program enabled GGF the opportunity to bring over sixty qualified graduate and under-graduate students with interests in grid technologies to its three annual events over the three-year program.

  16. Space Development Grid Portal

    NASA Technical Reports Server (NTRS)

    Vaziri, Arsi

    2004-01-01

    This viewgraph presentation provides information on the development of a portal to provide secure and distributed grid computing for Payload Operations Integrated Center and Mission Control Center ground services.

  17. IDL Grid Web Portal

    NASA Astrophysics Data System (ADS)

    Massimino, P.; Costa, A.

    2008-08-01

    Image Data Language is a software for data analysis, visualization and cross-platform application development. The potentiality of IDL is well-known in the academic scientific world, especially in the astronomical environment where thousands of procedures are developed by using IDL. The typical use of IDL is the interactive mode but it is also possible to run IDL programs that do not require any interaction with the user, submitting them in batch or background modality. Through the interactive mode the user immediately receives images or other data produced in the running phase of the program; in batch or background mode, the user will have to wait for the end of the program, sometime for many hours or days to obtain images or data that IDL produced as output: in fact in Grid environment it is possible to access to or retrieve data only after completion of the program. The work that we present gives flexibility to IDL procedures submitted to the Grid computer infrastructure. For this purpose we have developed an IDL Grid Web Portal to allow the user to access the Grid and to submit IDL programs granting a full job control and the access to images and data generated during the running phase, without waiting for their completion. We have used the PHP technology and we have given the same level of security that Grid normally offers to its users. In this way, when the user notices that the intermediate program results are not those expected, he can stop the job, change the parameters to better satisfy the computational algorithm and resubmit the program, without consuming the CPU time and other Grid resources. The IDL Grid Web Portal allows you to obtain IDL generated images, graphics and data tables by using a normal browser. All conversations from the user and the Grid resources occur via Web, as well as authentication phases. The IDL user has not to change the program source much because the Portal will automatically introduce the appropriate modification before

  18. Implementing Production Grids

    NASA Technical Reports Server (NTRS)

    Johnston, William E.; Ziobarth, John (Technical Monitor)

    2002-01-01

    We have presented the essence of experience gained in building two production Grids, and provided some of the global context for this work. As the reader might imagine, there were a lot of false starts, refinements to the approaches and to the software, and several substantial integration projects (SRB and Condor integrated with Globus) to get where we are today. However, the point of this paper is to try and make it substantially easier for others to get to the point where Information Power Grids (IPG) and the DOE Science Grids are today. This is what is needed in order to move us toward the vision of a common cyber infrastructure for science. The author would also like to remind the readers that this paper primarily represents the actual experiences that resulted from specific architectural and software choices during the design and implementation of these two Grids. The choices made were dictated by the criteria laid out in section 1. There is a lot more Grid software available today that there was four years ago, and various of these packages are being integrated into IPG and the DOE Grids. However, the foundation choices of Globus, SRB, and Condor would not be significantly different today than they were four years ago. Nonetheless, if the GGF is successful in its work - and we have every reason to believe that it will be - then in a few years we will see that the 28 functions provided by these packages will be defined in terms of protocols and MIS, and there will be several robust implementations available for each of the basic components, especially the Grid Common Services. The impact of the emerging Web Grid Services work is not yet clear. It will likely have a substantial impact on building higher level services, however it is the opinion of the author that this will in no way obviate the need for the Grid Common Services. These are the foundation of Grids, and the focus of almost all of the operational and persistent infrastructure aspects of Grids.

  19. Random array grid collimator

    DOEpatents

    Fenimore, E.E.

    1980-08-22

    A hexagonally shaped quasi-random no-two-holes touching grid collimator. The quasi-random array grid collimator eliminates contamination from small angle off-axis rays by using a no-two-holes-touching pattern which simultaneously provides for a self-supporting array increasng throughput by elimination of a substrate. The presentation invention also provides maximum throughput using hexagonally shaped holes in a hexagonal lattice pattern for diffraction limited applications. Mosaicking is also disclosed for reducing fabrication effort.

  20. Beyond grid security

    NASA Astrophysics Data System (ADS)

    Hoeft, B.; Epting, U.; Koenig, T.

    2008-07-01

    While many fields relevant to Grid security are already covered by existing working groups, their remit rarely goes beyond the scope of the Grid infrastructure itself. However, security issues pertaining to the internal set-up of compute centres have at least as much impact on Grid security. Thus, this talk will present briefly the EU ISSeG project (Integrated Site Security for Grids). In contrast to groups such as OSCT (Operational Security Coordination Team) and JSPG (Joint Security Policy Group), the purpose of ISSeG is to provide a holistic approach to security for Grid computer centres, from strategic considerations to an implementation plan and its deployment. The generalised methodology of Integrated Site Security (ISS) is based on the knowledge gained during its implementation at several sites as well as through security audits, and this will be briefly discussed. Several examples of ISS implementation tasks at the Forschungszentrum Karlsruhe will be presented, including segregation of the network for administration and maintenance and the implementation of Application Gateways. Furthermore, the web-based ISSeG training material will be introduced. This aims to offer ISS implementation guidance to other Grid installations in order to help avoid common pitfalls.

  1. Using Grid Benchmarks for Dynamic Scheduling of Grid Applications

    NASA Technical Reports Server (NTRS)

    Frumkin, Michael; Hood, Robert

    2003-01-01

    Navigation or dynamic scheduling of applications on computational grids can be improved through the use of an application-specific characterization of grid resources. Current grid information systems provide a description of the resources, but do not contain any application-specific information. We define a GridScape as dynamic state of the grid resources. We measure the dynamic performance of these resources using the grid benchmarks. Then we use the GridScape for automatic assignment of the tasks of a grid application to grid resources. The scalability of the system is achieved by limiting the navigation overhead to a few percent of the application resource requirements. Our task submission and assignment protocol guarantees that the navigation system does not cause grid congestion. On a synthetic data mining application we demonstrate that Gridscape-based task assignment reduces the application tunaround time.

  2. Near-Body Grid Adaption for Overset Grids

    NASA Technical Reports Server (NTRS)

    Buning, Pieter G.; Pulliam, Thomas H.

    2016-01-01

    A solution adaption capability for curvilinear near-body grids has been implemented in the OVERFLOW overset grid computational fluid dynamics code. The approach follows closely that used for the Cartesian off-body grids, but inserts refined grids in the computational space of original near-body grids. Refined curvilinear grids are generated using parametric cubic interpolation, with one-sided biasing based on curvature and stretching ratio of the original grid. Sensor functions, grid marking, and solution interpolation tasks are implemented in the same fashion as for off-body grids. A goal-oriented procedure, based on largest error first, is included for controlling growth rate and maximum size of the adapted grid system. The adaption process is almost entirely parallelized using MPI, resulting in a capability suitable for viscous, moving body simulations. Two- and three-dimensional examples are presented.

  3. Grid generation strategies for turbomachinery configurations

    NASA Astrophysics Data System (ADS)

    Lee, K. D.; Henderson, T. L.

    1991-01-01

    Turbomachinery flow fields involve unique grid generation issues due to their geometrical and physical characteristics. Several strategic approaches are discussed to generate quality grids. The grid quality is further enhanced through blending and adapting. Grid blending smooths the grids locally through averaging and diffusion operators. Grid adaptation redistributes the grid points based on a grid quality assessment. These methods are demonstrated with several examples.

  4. GRIDS: Grid-Scale Rampable Intermittent Dispatchable Storage

    SciTech Connect

    2010-09-01

    GRIDS Project: The 12 projects that comprise ARPA-E’s GRIDS Project, short for “Grid-Scale Rampable Intermittent Dispatchable Storage,” are developing storage technologies that can store renewable energy for use at any location on the grid at an investment cost less than $100 per kilowatt hour. Flexible, large-scale storage would create a stronger and more robust electric grid by enabling renewables to contribute to reliable power generation.

  5. Reference installation for the German grid initiative D-Grid

    NASA Astrophysics Data System (ADS)

    Buehler, W.; Dulov, O.; Garcia, A.; Jejkal, T.; Jrad, F.; Marten, H.; Mol, X.; Nilsen, D.; Schneider, O.

    2010-04-01

    The D-Grid reference installation is a test platform for the German grid initiative. The main task is to create the grid prototype for software and hardware components needed in the D-Grid community. For each grid-related task field different alternative middleware is included. With respect to changing demands from the community, new versions of the reference installation are released every six months.

  6. Arc Length Based Grid Distribution For Surface and Volume Grids

    NASA Technical Reports Server (NTRS)

    Mastin, C. Wayne

    1996-01-01

    Techniques are presented for distributing grid points on parametric surfaces and in volumes according to a specified distribution of arc length. Interpolation techniques are introduced which permit a given distribution of grid points on the edges of a three-dimensional grid block to be propagated through the surface and volume grids. Examples demonstrate how these methods can be used to improve the quality of grids generated by transfinite interpolation.

  7. Unstructured Grids on NURBS Surfaces

    NASA Technical Reports Server (NTRS)

    Samareh-Abolhassani, Jamshid

    1993-01-01

    A simple and efficient computational method is presented for unstructured surface grid generation. This method is built upon an advancing front technique combined with grid projection. The projection technique is based on a Newton-Raphson method. This combined approach has been successfully implemented for structured and unstructured grids. In this paper, the implementation for unstructured grid is discussed.

  8. The Benefits of Grid Networks

    ERIC Educational Resources Information Center

    Tennant, Roy

    2005-01-01

    In the article, the author talks about the benefits of grid networks. In speaking of grid networks the author is referring to both networks of computers and networks of humans connected together in a grid topology. Examples are provided of how grid networks are beneficial today and the ways in which they have been used.

  9. Smart Grid Integration Laboratory

    SciTech Connect

    Troxell, Wade

    2011-12-22

    The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSU's overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratory's focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3) Simulation of

  10. TCGRID: A three dimensional C-grid generator for turbomachinery

    NASA Technical Reports Server (NTRS)

    Chima, Rodrick V.

    1992-01-01

    A fast 3-D grid code for turbomachinery was developed. The code, TCGRID (Turbomachinery C-GRID), can generate either C or H type grids for fairly arbitrary axial or radical turbomachinery geometries. The code also has limited blocked grid capability and can generate an axisymmetric H type grid upstream of the blade row or an O type grid within the tip clearance region. Hub and tip geometries are input as a simple list of pairs. All geometric data is handled using parametric splines so that geometries that turn 90 degrees can be handled without difficulty. Blade input is in standard MERIDL or Lewis compressor design code format. TCGRID adds leading and trailing edge circles to MERIDL geometries and intersects the blade with the hub and tip if necessary using a novel intersection algorithm. The procedure used to generate the grid is given. Output is in PLOT3D format, which can also be read by the RVC3D (Rotor Viscous Code 3-D) Navier-Stokes code for turbomachinery. Intermediate 2-D or 3-D grids useful for debug and other purposes can also be output using a convenient output flag. A grid generated figure is given.

  11. The External Degree Project.

    ERIC Educational Resources Information Center

    Syracuse Univ., NY. School of Management.

    An external degree is one granted on the basis of academic work undertaken through independent and flexible study and pursued in whole or in part outside of the framework of existing college and university courses. A person's qualifications for an external degree are measured not by a list of accumulated formal courses taken and passed, but by an…

  12. What price a degree?

    PubMed

    Corbett, Kevin

    2016-05-25

    Let's face it, nurse education is big business for British universities. The lobby group of universities offering nursing degrees, the Council of Deans of health (CoDH), argues that the true cost of nursing degrees is subsidised by their members. PMID:27224609

  13. Degree Accreditation in Canada

    ERIC Educational Resources Information Center

    Marshall, Dave

    2004-01-01

    Until recently, the meaning and origin of the Canadian university degree was well understood by Canadians and around the world. Degrees were only offered by universities and the use of the label university was controlled by legislation in each of the ten provinces and three territories. Institutional membership in the Association of Universities…

  14. GridLAB-D/SG

    2011-08-30

    GridLAB-D is a new power system simulation tool that provides valuable information to users who design and operate electric power transmission and distribution systems, and to utilities that wish to take advantage of the latest smart grid technology. This special release of GridLAB-D was developed to study the proposed Smart Grid technology that is used by Battelle Memorial Institute in the AEP gridSMART demonstration project in Northeast Columbus, Ohio.

  15. An Approach for Dynamic Grids

    NASA Technical Reports Server (NTRS)

    Slater, John W.; Liou, Meng-Sing; Hindman, Richard G.

    1994-01-01

    An approach is presented for the generation of two-dimensional, structured, dynamic grids. The grid motion may be due to the motion of the boundaries of the computational domain or to the adaptation of the grid to the transient, physical solution. A time-dependent grid is computed through the time integration of the grid speeds which are computed from a system of grid speed equations. The grid speed equations are derived from the time-differentiation of the grid equations so as to ensure that the dynamic grid maintains the desired qualities of the static grid. The grid equations are the Euler-Lagrange equations derived from a variational statement for the grid. The dynamic grid method is demonstrated for a model problem involving boundary motion, an inviscid flow in a converging-diverging nozzle during startup, and a viscous flow over a flat plate with an impinging shock wave. It is shown that the approach is more accurate for transient flows than an approach in which the grid speeds are computed using a finite difference with respect to time of the grid. However, the approach requires significantly more computational effort.

  16. Complex Volume Grid Generation Through the Use of Grid Reusability

    NASA Technical Reports Server (NTRS)

    Alter, Stephen J.

    1997-01-01

    This paper presents a set of surface and volume grid generation techniques which reuse existing surface and volume grids. These methods use combinations of data manipulations to reduce grid generation time, improve grid characteristics, and increase the capabilities of existing domain discretization software. The manipulation techniques utilize physical and computational domains to produce basis function on which to operate and modify grid character and smooth grids using Trans-Finite Interpolation, a vector interpolation method and parametric re-mapping technique. With these new techniques, inviscid grids can be converted to viscous grids, multiple zone grid adaption can be performed to improve CFD solver efficiency, and topological changes to improve modeling of flow fields can be done simply and quickly. Examples of these capabilities are illustrated as applied to various configurations.

  17. NREL Smart Grid Projects

    SciTech Connect

    Hambrick, J.

    2012-01-01

    Although implementing Smart Grid projects at the distribution level provides many advantages and opportunities for advanced operation and control, a number of significant challenges must be overcome to maintain the high level of safety and reliability that the modern grid must provide. For example, while distributed generation (DG) promises to provide opportunities to increase reliability and efficiency and may provide grid support services such as volt/var control, the presence of DG can impact distribution operation and protection schemes. Additionally, the intermittent nature of many DG energy sources such as photovoltaics (PV) can present a number of challenges to voltage regulation, etc. This presentation provides an overview a number of Smart Grid projects being performed by the National Renewable Energy Laboratory (NREL) along with utility, industry, and academic partners. These projects include modeling and analysis of high penetration PV scenarios (with and without energy storage), development and testing of interconnection and microgrid equipment, as well as the development and implementation of advanced instrumentation and data acquisition used to analyze the impacts of intermittent renewable resources. Additionally, standards development associated with DG interconnection and analysis as well as Smart Grid interoperability will be discussed.

  18. An Adaptive Unstructured Grid Method by Grid Subdivision, Local Remeshing, and Grid Movement

    NASA Technical Reports Server (NTRS)

    Pirzadeh, Shahyar Z.

    1999-01-01

    An unstructured grid adaptation technique has been developed and successfully applied to several three dimensional inviscid flow test cases. The approach is based on a combination of grid subdivision, local remeshing, and grid movement. For solution adaptive grids, the surface triangulation is locally refined by grid subdivision, and the tetrahedral grid in the field is partially remeshed at locations of dominant flow features. A grid redistribution strategy is employed for geometric adaptation of volume grids to moving or deforming surfaces. The method is automatic and fast and is designed for modular coupling with different solvers. Several steady state test cases with different inviscid flow features were tested for grid/solution adaptation. In all cases, the dominant flow features, such as shocks and vortices, were accurately and efficiently predicted with the present approach. A new and robust method of moving tetrahedral "viscous" grids is also presented and demonstrated on a three-dimensional example.

  19. Grid generation and inviscid flow computation about aircraft geometries

    NASA Technical Reports Server (NTRS)

    Smith, Robert E.

    1989-01-01

    Grid generation and Euler flow about fighter aircraft are described. A fighter aircraft geometry is specified by an area ruled fuselage with an internal duct, cranked delta wing or strake/wing combinations, canard and/or horizontal tail surfaces, and vertical tail surfaces. The initial step before grid generation and flow computation is the determination of a suitable grid topology. The external grid topology that has been applied is called a dual-block topology which is a patched C (exp 1) continuous multiple-block system where inner blocks cover the highly-swept part of a cranked wing or strake, rearward inner-part of the wing, and tail components. Outer-blocks cover the remainder of the fuselage, outer-part of the wing, canards and extend to the far field boundaries. The grid generation is based on transfinite interpolation with Lagrangian blending functions. This procedure has been applied to the Langley experimental fighter configuration and a modified F-18 configuration. Supersonic flow between Mach 1.3 and 2.5 and angles of attack between 0 degrees and 10 degrees have been computed with associated Euler solvers based on the finite-volume approach. When coupling geometric details such as boundary layer diverter regions, duct regions with inlets and outlets, or slots with the general external grid, imposing C (exp 1) continuity can be extremely tedious. The approach taken here is to patch blocks together at common interfaces where there is no grid continuity, but enforce conservation in the finite-volume solution. The key to this technique is how to obtain the information required for a conservative interface. The Ramshaw technique which automates the computation of proportional areas of two overlapping grids on a planar surface and is suitable for coding was used. Researchers generated internal duct grids for the Langley experimental fighter configuration independent of the external grid topology, with a conservative interface at the inlet and outlet.

  20. Geoscientific Workflows using Grid Computing Infrastructure

    NASA Astrophysics Data System (ADS)

    Fraser, Ryan; Woodcock, Robert; Rankine, Terry

    2010-05-01

    regardless of the machines' type, manufacturer and location. Grid computing is 'middleware infrastructure', the essential catalyst that sits between a high-performance computer and a workflow client, such as the Virtual Rock Laboratory (a virtual space to crush rocks or particles) that simplifies access to high performance compute resources. Workflows were possible before the deployment of grid computing infrastructure but some required an order of magnitude longer to produce the desired outcome (differences of up to 6 months have been recorded) and typically required the user to have a degree in Computer Science. The Virtual Rock Laboratory, Geodesy Workflow and the Desktop Modelling Toolkit are all examples of workflow clients developed to enable complex scientific workflows. Grid computing has aided the development of these workflows and made it possible for scientists to process large scientific problems in record times.

  1. GATEWAYS: Degree program alternatives

    SciTech Connect

    Strong, K.R.; Thayer, M.M.

    1991-11-01

    Los Alamos National Laboratory is using non-traditional solutions to assist employees in attaining degrees required for essential Laboratory operations. Varieties of distance learning technologies have been implemented to meet some degree needs. While distance learning is not always a perfect solution, it enables the Laboratory to provide education that would otherwise not be practical for full-time employees. The Laboratory has also formed partnerships with local colleges to design programs to fill particular needs. Meeting the challenge of providing cost-effective, viable degree programs in an isolated location requires both patience and innovation.

  2. Information Power Grid Posters

    NASA Technical Reports Server (NTRS)

    Vaziri, Arsi

    2003-01-01

    This document is a summary of the accomplishments of the Information Power Grid (IPG). Grids are an emerging technology that provide seamless and uniform access to the geographically dispersed, computational, data storage, networking, instruments, and software resources needed for solving large-scale scientific and engineering problems. The goal of the NASA IPG is to use NASA's remotely located computing and data system resources to build distributed systems that can address problems that are too large or complex for a single site. The accomplishments outlined in this poster presentation are: access to distributed data, IPG heterogeneous computing, integration of large-scale computing node into distributed environment, remote access to high data rate instruments,and exploratory grid environment.

  3. The Computing Grids

    NASA Astrophysics Data System (ADS)

    Govoni, P.

    2009-12-01

    Since the beginning of the millennium, High Energy Physics research institutions like CERN and INFN pioneered several projects aimed at exploiting the synergy among computing power, storage and network resources, and creating an infrastructure of distributed computing on a worldwide scale. In the year 2000, after the Monarch project [ http://monarc.web.cern.ch/MONARC/], DataGrid started [ http://eu-datagrid.web.cern.ch/eu-datagrid/] aimed at providing High Energy Physics with the computing power needed for the LHC enterprise. This program evolved into the EU DataGrid project, that implemented the first actual prototype of a Grid middleware running on a testbed environment. The next step consisted in the application to the LHC experiments, with the LCG project [ http://lcg.web.cern.ch/LCG/], in turn followed by the EGEE [ http://www.eu-egee.org/] and EGEE II programs.

  4. Interactive surface grid generation

    NASA Technical Reports Server (NTRS)

    Luh, Raymond Ching-Chung; Pierce, Lawrence E.; Yip, David

    1991-01-01

    This paper describes a surface grid generation tool called S3D. It is the result of integrating a robust and widely applicable interpolation technique with the latest in workstation technology. Employing the use of a highly efficient and user-friendly graphical interface, S3D permits real-time interactive analyses of surface geometry data and facilitates the construction of surface grids for a wide range of applications in Computational Fluid Dynamics (CFD). The design objectives are for S3D to be stand-alone and easy to use so that CFD analysts can take a hands-on approach toward most if not all of their surface grid generation needs. Representative examples of S3D applications are presented in describing the various elements involved in the process.

  5. GridPV Toolbox

    2014-07-15

    Matlab Toolbox for simulating the impact of solar energy on the distribution grid. The majority of the functions are useful for interfacing OpenDSS and MATLAB, and they are of generic use for commanding OpenDSS from MATLAB and retrieving GridPV Toolbox information from simulations. A set of functions is also included for modeling PV plant output and setting up the PV plant in the OpenDSS simulation. The toolbox contains functions for modeling the OpenDSS distribution feedermore » on satellite images with GPS coordinates. Finally, example simulations functions are included to show potential uses of the toolbox functions.« less

  6. GridPV Toolbox

    SciTech Connect

    Broderick, Robert; Quiroz, Jimmy; Grijalva, Santiago; Reno, Matthew; Coogan, Kyle

    2014-07-15

    Matlab Toolbox for simulating the impact of solar energy on the distribution grid. The majority of the functions are useful for interfacing OpenDSS and MATLAB, and they are of generic use for commanding OpenDSS from MATLAB and retrieving GridPV Toolbox information from simulations. A set of functions is also included for modeling PV plant output and setting up the PV plant in the OpenDSS simulation. The toolbox contains functions for modeling the OpenDSS distribution feeder on satellite images with GPS coordinates. Finally, example simulations functions are included to show potential uses of the toolbox functions.

  7. A Programmable Calculator Activity, x = 1/x + 1.

    ERIC Educational Resources Information Center

    Snover, Stephen L.; Spikell, Mark A.

    An activity for secondary schools is presented and discussed which may be explored with a programmable calculator. The activity is non-standard and could not be easily explored without the use of a programmable calculator. Related activities are also discussed. Flow charts and programs for different programmable calculators are presented. (MP)

  8. Degree by Thesis

    ERIC Educational Resources Information Center

    Courtis, Barbara

    1974-01-01

    Discusses a student's experience with a research project on the synthesis and reactions of an organo-platinum complex with an organo-Group IV linkage, including the advantages and disadvantages of such a degree by thesis course. (CC)

  9. Latitude 90 Degrees North to 90 Degrees South and Longitude -180 Degrees to 0 Degrees

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The coordinates of the Lambert azimuthal equal area projection are latitude 90 degrees N. to 90 degrees S. and longitude -180 degrees to 0 degrees. The north polar residual ice cap of the Planum Boreum region, which is cut by spiral-patterned troughs, is located at top. The upper part is marked by large depression, Isidis basin, which contains light-colored plains. The upper part also includes the light-colored smooth plains of Elysium Planitia and dark plains of Vastitas Borealis. Together, these form a vast expanse of contiguous plains. Toward the bottom, on the other hand, the southern hemisphere is almost entirely made up of heavily cratered highlands. Toward the bottom, a conspicuous, relatively bright circular depression marks the ancient large Hellas impact basin.

  10. Latitude 90 Degrees North to 90 Degrees South and Longitude 0 Degrees to 180 Degrees

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The coordinates of the Lambert azimuthal equal area projection are latitude 90 degrees N. to 90 degrees S. and longitude 0 degree to 180 degrees. Both polar residual ice caps are seen at top and bottom. The central part is dominated by the four largest and youngest volcanoes on Mars--Olympus, Arsia, Pavonis, and Ascraeus Montes--and by a vast system of canyons several thousand kilometers long--Valles Marineris. Directly to the northeast of Valles Marineris, several large outflow channels terminate at a dark depression, Chryse basin. The lower-right corner is marked by the large Argyre basin, defined by an expanse of light-colored plains 800 km across.

  11. Essential Grid Workflow Monitoring Elements

    SciTech Connect

    Gunter, Daniel K.; Jackson, Keith R.; Konerding, David E.; Lee,Jason R.; Tierney, Brian L.

    2005-07-01

    Troubleshooting Grid workflows is difficult. A typicalworkflow involves a large number of components networks, middleware,hosts, etc. that can fail. Even when monitoring data from all thesecomponents is accessible, it is hard to tell whether failures andanomalies in these components are related toa given workflow. For theGrid to be truly usable, much of this uncertainty must be elim- inated.We propose two new Grid monitoring elements, Grid workflow identifiersand consistent component lifecycle events, that will make Gridtroubleshooting easier, and thus make Grids more usable, by simplifyingthe correlation of Grid monitoring data with a particular Gridworkflow.

  12. Distributed Accounting on the Grid

    NASA Technical Reports Server (NTRS)

    Thigpen, William; Hacker, Thomas J.; McGinnis, Laura F.; Athey, Brian D.

    2001-01-01

    By the late 1990s, the Internet was adequately equipped to move vast amounts of data between HPC (High Performance Computing) systems, and efforts were initiated to link together the national infrastructure of high performance computational and data storage resources together into a general computational utility 'grid', analogous to the national electrical power grid infrastructure. The purpose of the Computational grid is to provide dependable, consistent, pervasive, and inexpensive access to computational resources for the computing community in the form of a computing utility. This paper presents a fully distributed view of Grid usage accounting and a methodology for allocating Grid computational resources for use on a Grid computing system.

  13. Enabling Campus Grids with Open Science Grid Technology

    NASA Astrophysics Data System (ADS)

    Weitzel, Derek; Bockelman, Brian; Fraser, Dan; Pordes, Ruth; Swanson, David

    2011-12-01

    The Open Science Grid is a recognized key component of the US national cyber-infrastructure enabling scientific discovery through advanced high throughput computing. The principles and techniques that underlie the Open Science Grid can also be applied to Campus Grids since many of the requirements are the same, even if the implementation technologies differ. We find five requirements for a campus grid: trust relationships, job submission, resource independence, accounting, and data management. The Holland Computing Center's campus grid at the University of Nebraska-Lincoln was designed to fulfill the requirements of a campus grid. A bridging daemon was designed to bring non-Condor clusters into a grid managed by Condor. Condor features which make it possible to bridge Condor sites into a multi-campus grid have been exploited at the Holland Computing Center as well.

  14. Changing from computing grid to knowledge grid in life-science grid.

    PubMed

    Talukdar, Veera; Konar, Amit; Datta, Ayan; Choudhury, Anamika Roy

    2009-09-01

    Grid computing has a great potential to become a standard cyber infrastructure for life sciences that often require high-performance computing and large data handling, which exceeds the computing capacity of a single institution. Grid computer applies the resources of many computers in a network to a single problem at the same time. It is useful to scientific problems that require a great number of computer processing cycles or access to a large amount of data.As biologists,we are constantly discovering millions of genes and genome features, which are assembled in a library and distributed on computers around the world.This means that new, innovative methods must be developed that exploit the re-sources available for extensive calculations - for example grid computing.This survey reviews the latest grid technologies from the viewpoints of computing grid, data grid and knowledge grid. Computing grid technologies have been matured enough to solve high-throughput real-world life scientific problems. Data grid technologies are strong candidates for realizing a "resourceome" for bioinformatics. Knowledge grids should be designed not only from sharing explicit knowledge on computers but also from community formulation for sharing tacit knowledge among a community. By extending the concept of grid from computing grid to knowledge grid, it is possible to make use of a grid as not only sharable computing resources, but also as time and place in which people work together, create knowledge, and share knowledge and experiences in a community. PMID:19579217

  15. APEC Smart Grid Initiative

    SciTech Connect

    Bloyd, Cary N.

    2012-03-01

    This brief paper describes the activities of the Asia Pacific Economic Cooperation (APEC) Smart Grid Initiative (ASGI) which is being led by the U.S. and developed by the APEC Energy Working Group. In the paper, I describe the origin of the initiative and briefly mention the four major elements of the initiative along with existing APEC projects which support it.

  16. Unlocking the smart grid

    SciTech Connect

    Rokach, Joshua Z.

    2010-10-15

    The country has progressed in a relatively short time from rotary dial phones to computers, cell phones, and iPads. With proper planning and orderly policy implementation, the same will happen with the Smart Grid. Here are some suggestions on how to proceed. (author)

  17. NSTAR Smart Grid Pilot

    SciTech Connect

    Rabari, Anil; Fadipe, Oloruntomi

    2014-03-31

    NSTAR Electric & Gas Corporation (“the Company”, or “NSTAR”) developed and implemented a Smart Grid pilot program beginning in 2010 to demonstrate the viability of leveraging existing automated meter reading (“AMR”) deployments to provide much of the Smart Grid functionality of advanced metering infrastructure (“AMI”), but without the large capital investment that AMI rollouts typically entail. In particular, a central objective of the Smart Energy Pilot was to enable residential dynamic pricing (time-of-use “TOU” and critical peak rates and rebates) and two-way direct load control (“DLC”) by continually capturing AMR meter data transmissions and communicating through customer-sited broadband connections in conjunction with a standardsbased home area network (“HAN”). The pilot was supported by the U.S. Department of Energy’s (“DOE”) through the Smart Grid Demonstration program. NSTAR was very pleased to not only receive the funding support from DOE, but the guidance and support of the DOE throughout the pilot. NSTAR is also pleased to report to the DOE that it was able to execute and deliver a successful pilot on time and on budget. NSTAR looks for future opportunities to work with the DOE and others in future smart grid projects.

  18. Efficient grid generation

    NASA Technical Reports Server (NTRS)

    Seki, Rycichi

    1989-01-01

    Because the governing equations in fluid dynamics contain partial differentials and are too difficult in most cases to solve analytically, these differentials are generally replaced by finite difference terms. These terms contain terms in the solution at nearby states. This procedure discretizes the field into a finite number of states. These states, when plotted, form a grid, or mesh, of points. It is at these states, or field points, that the solution is found. The optimum choice of states, the x, y, z coordinate values, minimizes error and computational time. But the process of finding these states is made more difficult by complex boundaries, and by the need to control step size differences between the states, that is, the need to control the spacing of field points. One solution technique uses a different set of state variables, which define a different coordinate system, to generate the grid more easily. A new method, developed by Dr. Joseph Steger, combines elliptic and hyperbolic partial differential equations into a mapping function between the physical and computational coordinate systems. This system of equations offers more control than either equation provides alone. The Steger algorithm was modified in order to allow bodies with stronger concavities to be used, offering the possibility of generating a single grid about multiple bodies. Work was also done on identifying areas where grid breakdown occurs.

  19. Grid generation research at OSU

    NASA Technical Reports Server (NTRS)

    Nakamura, S.

    1992-01-01

    In the last two years, effort was concentrated on: (1) surface modeling; (2) surface grid generation; and (3) 3-D flow space grid generation. The surface modeling shares the same objectives as the surface modeling in computer aided design (CAD), so software available in CAD can in principle be used for solid modeling. Unfortunately, however, the CAD software cannot be easily used in practice for grid generation purposes, because they are not designed to provide appropriate data base for grid generation. Therefore, we started developing a generalized surface modeling software from scratch, that provides the data base for the surface grid generation. Generating surface grid is an important step in generating a 3-D space for flow space. To generate a surface grid on a given surface representation, we developed a unique algorithm that works on any non-smooth surfaces. Once the surface grid is generated, a 3-D space can be generated. For this purpose, we also developed a new algorithm, which is a hybrid of the hyperbolic and the elliptic grid generation methods. With this hybrid method, orthogonality of the grid near the solid boundary can be easily achieved without introducing empirical fudge factors. Work to develop 2-D and 3-D grids for turbomachinery blade geometries was performed, and as an extension of this research we are planning to develop an adaptive grid procedure with an interactive grid environment.

  20. World Gravity Map: a set of global complete spherical Bouguer and isostatic anomaly maps and grids

    NASA Astrophysics Data System (ADS)

    Bonvalot, S.; Balmino, G.; Briais, A.; Kuhn, M.; Peyrefitte, A.; Vales, N.; Biancale, R.; Gabalda, G.; Reinquin, F.

    2012-04-01

    We present here a set of digital maps of the Earth's gravity anomalies (surface free air, Bouguer and isostatic), computed at Bureau Gravimetric International (BGI) as a contribution to the Global Geodetic Observing Systems (GGOS) and to the global geophysical maps published by the Commission for the Geological Map of the World (CGMW) with support of UNESCO and other institutions. The Bouguer anomaly concept is extensively used in geophysical interpretation to investigate the density distributions in the Earth's interior. Complete Bouguer anomalies (including terrain effects) are usually computed at regional scales by integrating the gravity attraction of topography elements over and beyond a given area (under planar or spherical approximations). Here, we developed and applied a worldwide spherical approach aimed to provide a set of homogeneous and high resolution gravity anomaly maps and grids computed at the Earth's surface, taking into account a realistic Earth model and reconciling geophysical and geodetic definitions of gravity anomalies. This first version (1.0) has been computed by spherical harmonics analysis / synthesis of the Earth's topography-bathymetry up to degree 10800. The detailed theory of the spherical harmonics approach is given in Balmino et al., (Journal of Geodesy, 2011). The Bouguer and terrain corrections have thus been computed in spherical geometry at 1'x1' resolution using the ETOPO1 topography/bathymetry, ice surface and bedrock models from the NOAA (National Oceanic and Atmospheric Administration) and taking into account precise characteristics (boundaries and densities) of major lakes, inner seas, polar caps and of land areas below sea level. Isostatic corrections have been computed according to the Airy-Heiskanen model in spherical geometry for a constant depth of compensation of 30km. The gravity information given here is provided by the Earth Geopotential Model (EGM2008), developed at degree 2160 by the National Geospatial

  1. Current Grid operation and future role of the Grid

    NASA Astrophysics Data System (ADS)

    Smirnova, O.

    2012-12-01

    Grid-like technologies and approaches became an integral part of HEP experiments. Some other scientific communities also use similar technologies for data-intensive computations. The distinct feature of Grid computing is the ability to federate heterogeneous resources of different ownership into a seamless infrastructure, accessible via a single log-on. Like other infrastructures of similar nature, Grid functioning requires not only technologically sound basis, but also reliable operation procedures, monitoring and accounting. The two aspects, technological and operational, are closely related: weaker is the technology, more burden is on operations, and other way around. As of today, Grid technologies are still evolving: at CERN alone, every LHC experiment uses an own Grid-like system. This inevitably creates a heavy load on operations. Infrastructure maintenance, monitoring and incident response are done on several levels, from local system administrators to large international organisations, involving massive human effort worldwide. The necessity to commit substantial resources is one of the obstacles faced by smaller research communities when moving computing to the Grid. Moreover, most current Grid solutions were developed under significant influence of HEP use cases, and thus need additional effort to adapt them to other applications. Reluctance of many non-HEP researchers to use Grid negatively affects the outlook for national Grid organisations, which strive to provide multi-science services. We started from the situation where Grid organisations were fused with HEP laboratories and national HEP research programmes; we hope to move towards the world where Grid will ultimately reach the status of generic public computing and storage service provider and permanent national and international Grid infrastructures will be established. How far will we be able to advance along this path, depends on us. If no standardisation and convergence efforts will take place

  2. A grid spacing control technique for algebraic grid generation methods

    NASA Technical Reports Server (NTRS)

    Smith, R. E.; Kudlinski, R. A.; Everton, E. L.

    1982-01-01

    A technique which controls the spacing of grid points in algebraically defined coordinate transformations is described. The technique is based on the generation of control functions which map a uniformly distributed computational grid onto parametric variables defining the physical grid. The control functions are smoothed cubic splines. Sets of control points are input for each coordinate directions to outline the control functions. Smoothed cubic spline functions are then generated to approximate the input data. The technique works best in an interactive graphics environment where control inputs and grid displays are nearly instantaneous. The technique is illustrated with the two-boundary grid generation algorithm.

  3. Spectral methods on arbitrary grids

    NASA Technical Reports Server (NTRS)

    Carpenter, Mark H.; Gottlieb, David

    1995-01-01

    Stable and spectrally accurate numerical methods are constructed on arbitrary grids for partial differential equations. These new methods are equivalent to conventional spectral methods but do not rely on specific grid distributions. Specifically, we show how to implement Legendre Galerkin, Legendre collocation, and Laguerre Galerkin methodology on arbitrary grids.

  4. Ion Engine Grid Gap Measurements

    NASA Technical Reports Server (NTRS)

    Soulas, Gerge C.; Frandina, Michael M.

    2004-01-01

    A simple technique for measuring the grid gap of an ion engine s ion optics during startup and steady-state operation was demonstrated with beam extraction. The grid gap at the center of the ion optics assembly was measured with a long distance microscope that was focused onto an alumina pin that protruded through the center accelerator grid aperture and was mechanically attached to the screen grid. This measurement technique was successfully applied to a 30 cm titanium ion optics assembly mounted onto an NSTAR engineering model ion engine. The grid gap and each grid s movement during startup from room temperature to both full and low power were measured. The grid gaps with and without beam extraction were found to be significantly different. The grid gaps at the ion optics center were both significantly smaller than the cold grid gap and different at the two power levels examined. To avoid issues associated with a small grid gap during thruster startup with titanium ion optics, a simple method was to operate the thruster initially without beam extraction to heat the ion optics. Another possible method is to apply high voltage to the grids prior to igniting the discharge because power deposition to the grids from the plasma is lower with beam extraction than without. Further testing would be required to confirm this approach.

  5. Grid Interaction Technical Team Roadmap

    SciTech Connect

    2013-06-01

    The mission of the Grid Interaction Technical Team (GITT) is to support a transition scenario to large scale grid-connected vehicle charging with transformational technology, proof of concept and information dissemination. The GITT facilitates technical coordination and collaboration between vehicle-grid connectivity and communication activities among U.S. DRIVE government and industry partners.

  6. One Degree of Separation

    ERIC Educational Resources Information Center

    Johnson, Jean

    2012-01-01

    A 2011 survey of young adults conducted by Public Agenda found that a cluster of obstacles have prevented many of them from competing college. The author describes the opportunity, college awareness, and funding gaps that put a postsecondary degree out of the reach of so many young people. For example, just 3 in 10 non-college-completers are aware…

  7. Charting Journalism Degrees.

    ERIC Educational Resources Information Center

    Borden, Victor M. H.

    1998-01-01

    Data are presented on the numbers of African Americans, Hispanic Americans, Asian Americans, and total minority group members receiving associate, bachelor's, master's and doctoral degrees in journalism and mass communication in 1997-98. Colleges and universities graduating the most minorities are also ranked. (MSE)

  8. Feedback at 360 Degrees.

    ERIC Educational Resources Information Center

    Manatt, Richard P.

    2000-01-01

    Multirater or 360-degree feedback is a sampling technique that can be used at three levels: for developmental purposes, appraisal, and compensation. It was designed to be small-scale, personalized, and occasional. Implementation tips and pitfalls for districts are described. (MLH)

  9. Registered Nurse (Associate Degree).

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of registered nurse (with an associate degree), lists technical competencies and competency builders for 19 units pertinent to the health technologies cluster in general and 5 units specific to the occupation of registered nurse. The following…

  10. Top Hispanic Degree Producers

    ERIC Educational Resources Information Center

    Diverse: Issues in Higher Education, 2012

    2012-01-01

    This article presents a list of the top 100 producers of associate, bachelor's and graduate degrees awarded to minority students based on research conducted by Dr. Victor M.H. Borden, professor of educational leadership and policy students at the Indiana University Bloomington. For the year 2012, the listings focus on Hispanic students. Data for…

  11. BA Degree Handbook, 1978.

    ERIC Educational Resources Information Center

    Open Univ., Walton, Bletchley, Bucks (England).

    This 1978 Open University BA degree Handbook begins with information about the university organization, correspondence materials, assignments and examinations, television and radio broadcasts, audio-cassette loan service, books and libraries, study centers, the computing service, handicapped students, tutor-counselors and course tutors, tuition,…

  12. Cloud Computing for the Grid: GridControl: A Software Platform to Support the Smart Grid

    SciTech Connect

    2012-02-08

    GENI Project: Cornell University is creating a new software platform for grid operators called GridControl that will utilize cloud computing to more efficiently control the grid. In a cloud computing system, there are minimal hardware and software demands on users. The user can tap into a network of computers that is housed elsewhere (the cloud) and the network runs computer applications for the user. The user only needs interface software to access all of the cloud’s data resources, which can be as simple as a web browser. Cloud computing can reduce costs, facilitate innovation through sharing, empower users, and improve the overall reliability of a dispersed system. Cornell’s GridControl will focus on 4 elements: delivering the state of the grid to users quickly and reliably; building networked, scalable grid-control software; tailoring services to emerging smart grid uses; and simulating smart grid behavior under various conditions.

  13. Smart Grid Demonstration Project

    SciTech Connect

    Miller, Craig; Carroll, Paul; Bell, Abigail

    2015-03-11

    The National Rural Electric Cooperative Association (NRECA) organized the NRECA-U.S. Department of Energy (DOE) Smart Grid Demonstration Project (DE-OE0000222) to install and study a broad range of advanced smart grid technologies in a demonstration that spanned 23 electric cooperatives in 12 states. More than 205,444 pieces of electronic equipment and more than 100,000 minor items (bracket, labels, mounting hardware, fiber optic cable, etc.) were installed to upgrade and enhance the efficiency, reliability, and resiliency of the power networks at the participating co-ops. The objective of this project was to build a path for other electric utilities, and particularly electrical cooperatives, to adopt emerging smart grid technology when it can improve utility operations, thus advancing the co-ops’ familiarity and comfort with such technology. Specifically, the project executed multiple subprojects employing a range of emerging smart grid technologies to test their cost-effectiveness and, where the technology demonstrated value, provided case studies that will enable other electric utilities—particularly electric cooperatives— to use these technologies. NRECA structured the project according to the following three areas: Demonstration of smart grid technology; Advancement of standards to enable the interoperability of components; and Improvement of grid cyber security. We termed these three areas Technology Deployment Study, Interoperability, and Cyber Security. Although the deployment of technology and studying the demonstration projects at coops accounted for the largest portion of the project budget by far, we see our accomplishments in each of the areas as critical to advancing the smart grid. All project deliverables have been published. Technology Deployment Study: The deliverable was a set of 11 single-topic technical reports in areas related to the listed technologies. Each of these reports has already been submitted to DOE, distributed to co-ops, and

  14. Gridded electron reversal ionizer

    NASA Technical Reports Server (NTRS)

    Chutjian, Ara (Inventor)

    1993-01-01

    A gridded electron reversal ionizer forms a three dimensional cloud of zero or near-zero energy electrons in a cavity within a filament structure surrounding a central electrode having holes through which the sample gas, at reduced pressure, enters an elongated reversal volume. The resultant negative ion stream is applied to a mass analyzer. The reduced electron and ion space-charge limitations of this configuration enhances detection sensitivity for material to be detected by electron attachment, such as narcotic and explosive vapors. Positive ions may be generated by generating electrons having a higher energy, sufficient to ionize the target gas and pulsing the grid negative to stop the electron flow and pulsing the extraction aperture positive to draw out the positive ions.

  15. 76 FR 1153 - Atlantic Grid Operations A LLC, Atlantic Grid Operations B LLC, Atlantic Grid Operations C LLC...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-07

    ... Energy Regulatory Commission Atlantic Grid Operations A LLC, Atlantic Grid Operations B LLC, Atlantic Grid Operations C LLC, Atlantic Grid Operations D LLC and Atlantic Grid Operations E LLC; Notice of... (Commission) Rules of Practice and Procedure, 18 CFR 385.207, and Order No. 679,\\1\\ Atlantic Grid Operations...

  16. TRMM Gridded Text Products

    NASA Technical Reports Server (NTRS)

    Stocker, Erich Franz

    2007-01-01

    NASA's Tropical Rainfall Measuring Mission (TRMM) has many products that contain instantaneous or gridded rain rates often among many other parameters. However, these products because of their completeness can often seem intimidating to users just desiring surface rain rates. For example one of the gridded monthly products contains well over 200 parameters. It is clear that if only rain rates are desired, this many parameters might prove intimidating. In addition, for many good reasons these products are archived and currently distributed in HDF format. This also can be an inhibiting factor in using TRMM rain rates. To provide a simple format and isolate just the rain rates from the many other parameters, the TRMM product created a series of gridded products in ASCII text format. This paper describes the various text rain rate products produced. It provides detailed information about parameters and how they are calculated. It also gives detailed format information. These products are used in a number of applications with the TRMM processing system. The products are produced from the swath instantaneous rain rates and contain information from the three major TRMM instruments: radar, radiometer, and combined. They are simple to use, human readable, and small for downloading.

  17. Wireless Communications in Smart Grid

    NASA Astrophysics Data System (ADS)

    Bojkovic, Zoran; Bakmaz, Bojan

    Communication networks play a crucial role in smart grid, as the intelligence of this complex system is built based on information exchange across the power grid. Wireless communications and networking are among the most economical ways to build the essential part of the scalable communication infrastructure for smart grid. In particular, wireless networks will be deployed widely in the smart grid for automatic meter reading, remote system and customer site monitoring, as well as equipment fault diagnosing. With an increasing interest from both the academic and industrial communities, this chapter systematically investigates recent advances in wireless communication technology for the smart grid.

  18. Grid generation for turbomachinery problems

    NASA Technical Reports Server (NTRS)

    Steinhoff, J.; Reddy, K. C.

    1986-01-01

    The development of a computer code to generate numerical grids for complex internal flow systems such as the fluid flow inside the space shuttle main engine is outlined. The blending technique for generating a grid for stator-rotor combination at a particular radial section is examined. The computer programs which generate these grids are listed in the Appendices. These codes are capable of generating grids at different cross sections and thus providng three dimensional stator-rotor grids for the turbomachinery of the space shuttle main engine.

  19. 3D Structured Grid Adaptation

    NASA Technical Reports Server (NTRS)

    Banks, D. W.; Hafez, M. M.

    1996-01-01

    Grid adaptation for structured meshes is the art of using information from an existing, but poorly resolved, solution to automatically redistribute the grid points in such a way as to improve the resolution in regions of high error, and thus the quality of the solution. This involves: (1) generate a grid vis some standard algorithm, (2) calculate a solution on this grid, (3) adapt the grid to this solution, (4) recalculate the solution on this adapted grid, and (5) repeat steps 3 and 4 to satisfaction. Steps 3 and 4 can be repeated until some 'optimal' grid is converged to but typically this is not worth the effort and just two or three repeat calculations are necessary. They also may be repeated every 5-10 time steps for unsteady calculations.

  20. Progress in Grid Generation: From Chimera to DRAGON Grids

    NASA Technical Reports Server (NTRS)

    Liou, Meng-Sing; Kao, Kai-Hsiung

    1994-01-01

    Hybrid grids, composed of structured and unstructured grids, combines the best features of both. The chimera method is a major stepstone toward a hybrid grid from which the present approach is evolved. The chimera grid composes a set of overlapped structured grids which are independently generated and body-fitted, yielding a high quality grid readily accessible for efficient solution schemes. The chimera method has been shown to be efficient to generate a grid about complex geometries and has been demonstrated to deliver accurate aerodynamic prediction of complex flows. While its geometrical flexibility is attractive, interpolation of data in the overlapped regions - which in today's practice in 3D is done in a nonconservative fashion, is not. In the present paper we propose a hybrid grid scheme that maximizes the advantages of the chimera scheme and adapts the strengths of the unstructured grid while at the same time keeps its weaknesses minimal. Like the chimera method, we first divide up the physical domain by a set of structured body-fitted grids which are separately generated and overlaid throughout a complex configuration. To eliminate any pure data manipulation which does not necessarily follow governing equations, we use non-structured grids only to directly replace the region of the arbitrarily overlapped grids. This new adaptation to the chimera thinking is coined the DRAGON grid. The nonstructured grid region sandwiched between the structured grids is limited in size, resulting in only a small increase in memory and computational effort. The DRAGON method has three important advantages: (1) preserving strengths of the chimera grid; (2) eliminating difficulties sometimes encountered in the chimera scheme, such as the orphan points and bad quality of interpolation stencils; and (3) making grid communication in a fully conservative and consistent manner insofar as the governing equations are concerned. To demonstrate its use, the governing equations are

  1. Models of Grid Cell Spatial Firing Published 2005–2011

    PubMed Central

    Zilli, Eric A.

    2012-01-01

    Since the discovery of grid cells in rat entorhinal cortex, many models of their hexagonally arrayed spatial firing fields have been suggested. We review the models and organize them according to the mechanisms they use to encode position, update the positional code, read it out in the spatial grid pattern, and learn any patterned synaptic connections needed. We mention biological implementations of the models, but focus on the models on Marr’s algorithmic level, where they are not things to individually prove or disprove, but rather are a valuable collection of metaphors of the grid cell system for guiding research that are all likely true to some degree, with each simply emphasizing different aspects of the system. For the convenience of interested researchers, MATLAB implementations of the discussed grid cell models are provided at ModelDB accession 144006 or http://people.bu.edu/zilli/gridmodels.html. PMID:22529780

  2. Topology and vulnerability of the Iranian power grid

    NASA Astrophysics Data System (ADS)

    Saniee Monfared, Momhammad Ali; Jalili, Mahdi; Alipour, Zohreh

    2014-07-01

    In this paper we investigated the structural properties of the ultra high voltage power transmission network of Iran. We modeled the power grid as a network with 105 nodes and 142 connection links. We found that the Iranian power grid displays a relatively moderate clustering coefficient-much larger than that of corresponding random networks-and small characteristics path length comparable to that of corresponding random networks; i.e. the power grid is a small-world network with exponential degree distribution. Global efficiency was considered as an indicator of grid’s performance and the influence of random and intentional nodal failures on the efficiency was investigated. We also studied the influence of cascaded failures on the largest connected component of the network. The power grid was vulnerable against cascaded failures, which should be considered serious in redesigning the network topology.

  3. Homogeneity and EPR metrics for assessment of regular grids used in CW EPR powder simulations.

    PubMed

    Crăciun, Cora

    2014-08-01

    CW EPR powder spectra may be approximated numerically using a spherical grid and a Voronoi tessellation-based cubature. For a given spin system, the quality of simulated EPR spectra depends on the grid type, size, and orientation in the molecular frame. In previous work, the grids used in CW EPR powder simulations have been compared mainly from geometric perspective. However, some grids with similar homogeneity degree generate different quality simulated spectra. This paper evaluates the grids from EPR perspective, by defining two metrics depending on the spin system characteristics and the grid Voronoi tessellation. The first metric determines if the grid points are EPR-centred in their Voronoi cells, based on the resonance magnetic field variations inside these cells. The second metric verifies if the adjacent Voronoi cells of the tessellation are EPR-overlapping, by computing the common range of their resonance magnetic field intervals. Beside a series of well known regular grids, the paper investigates a modified ZCW grid and a Fibonacci spherical code, which are new in the context of EPR simulations. For the investigated grids, the EPR metrics bring more information than the homogeneity quantities and are better related to the grids' EPR behaviour, for different spin system symmetries. The metrics' efficiency and limits are finally verified for grids generated from the initial ones, by using the original or magnetic field-constraint variants of the Spherical Centroidal Voronoi Tessellation method. PMID:24968092

  4. Smart Grid Risk Management

    NASA Astrophysics Data System (ADS)

    Abad Lopez, Carlos Adrian

    Current electricity infrastructure is being stressed from several directions -- high demand, unreliable supply, extreme weather conditions, accidents, among others. Infrastructure planners have, traditionally, focused on only the cost of the system; today, resilience and sustainability are increasingly becoming more important. In this dissertation, we develop computational tools for efficiently managing electricity resources to help create a more reliable and sustainable electrical grid. The tools we present in this work will help electric utilities coordinate demand to allow the smooth and large scale integration of renewable sources of energy into traditional grids, as well as provide infrastructure planners and operators in developing countries a framework for making informed planning and control decisions in the presence of uncertainty. Demand-side management is considered as the most viable solution for maintaining grid stability as generation from intermittent renewable sources increases. Demand-side management, particularly demand response (DR) programs that attempt to alter the energy consumption of customers either by using price-based incentives or up-front power interruption contracts, is more cost-effective and sustainable in addressing short-term supply-demand imbalances when compared with the alternative that involves increasing fossil fuel-based fast spinning reserves. An essential step in compensating participating customers and benchmarking the effectiveness of DR programs is to be able to independently detect the load reduction from observed meter data. Electric utilities implementing automated DR programs through direct load control switches are also interested in detecting the reduction in demand to efficiently pinpoint non-functioning devices to reduce maintenance costs. We develop sparse optimization methods for detecting a small change in the demand for electricity of a customer in response to a price change or signal from the utility

  5. GridTool: A surface modeling and grid generation tool

    NASA Technical Reports Server (NTRS)

    Samareh-Abolhassani, Jamshid

    1995-01-01

    GridTool is designed around the concept that the surface grids are generated on a set of bi-linear patches. This type of grid generation is quite easy to implement, and it avoids the problems associated with complex CAD surface representations and associated surface parameterizations. However, the resulting surface grids are close to but not on the original CAD surfaces. This problem can be alleviated by projecting the resulting surface grids onto the original CAD surfaces. GridTool is designed primary for unstructured grid generation systems. Currently, GridTool supports VGRID and FELISA systems, and it can be easily extended to support other unstructured grid generation systems. The data in GridTool is stored parametrically so that once the problem is set up, one can modify the surfaces and the entire set of points, curves and patches will be updated automatically. This is very useful in a multidisciplinary design and optimization process. GridTool is written entirely in ANSI 'C', the interface is based on the FORMS library, and the graphics is based on the GL library. The code has been tested successfully on IRIS workstations running IRIX4.0 and above. The memory is allocated dynamically, therefore, memory size will depend on the complexity of geometry/grid. GridTool data structure is based on a link-list structure which allows the required memory to expand and contract dynamically according to the user's data size and action. Data structure contains several types of objects such as points, curves, patches, sources and surfaces. At any given time, there is always an active object which is drawn in magenta, or in their highlighted colors as defined by the resource file which will be discussed later.

  6. The Necessity of a New Type Test Rig for the Development of an Evaluation Method in Grid Fretting Problems

    SciTech Connect

    Lee, Young-Ho; Kim, Hyung-Kyu

    2007-07-01

    A grid fretting problem is recognized as one of the most important degradation mechanisms even though the examination results of fretting experiments could be applied to the development and design of spacer grid structures. This is because it is difficult to develop a fretting wear model for a grid fretting problem due to the various wear mechanisms involved according to the mechanical and environmental variables, the contact condition with a spring/dimple and the material properties. A number of spring shapes has been developed in KAERI and their performance tests such as fretting wear, flow-induced vibration (FIV) tests, etc. have been carried out from a part unit to a full assembly scale. From the unit part fretting test results, one of the noticeable results is that the contacting force (normal load) was gradually decreased with increasing number of fretting cycles due to a depth increase and this behavior was closely related to the contacting spring shape. When considering the actual contact condition between a fuel rod and a spring/dimple, if a fretting wear progresses due to a FIV under a specific normal load exerted on the fuel rod by an elastic deformation of the spring, the contacting force between the fuel rod and dimple that are located in the opposite side should be decreased. Consequently, an evaluation of developed spacer grids against fretting wear damage should be performed with the results of 1x1 cell unit experiments because a contacting force is one of the most important variables that influences a fretting wear mechanism. The discussion was focused on the development procedure of a new test rig and its performance by using a 1x1 cell unit test rig. (authors)

  7. Aspects and applications of patched grid calculations

    NASA Technical Reports Server (NTRS)

    Walters, R. W.; Switzer, G. F.; Thomas, J. L.

    1986-01-01

    Patched grid calculations within the framework of an implicit, flux-vector split upwind/relaxation algorithm for the Euler equations are presented. The effect of a metric-discontinuous interface on the convergence rate of the algorithm is discussed along with the spatial accuracy of the solution and the effect of curvature along an interface. Results are presented and discussed for the free-stream problem, shock reflection problem, supersonic inlet with a 5 degree ramp, aerodynamically choked inlet, and three-dimensional analytic forebody.

  8. Flow simulation on generalized grids

    SciTech Connect

    Koomullil, R.P.; Soni, B.K.; Huang, Chi Ti

    1996-12-31

    A hybrid grid generation methodology and flow simulation on grids having an arbitrary number of sided polygons is presented. A hyperbolic type marching scheme is used for generating structured grids near the solid boundaries. A local elliptic solver is utilized for smoothing the grid lines and for avoiding grid line crossing. A new method for trimming the overlaid structured grid is presented. Delaunay triangulation is employed to generate an unstructured grid in the regions away from the body. The structured and unstructured grid regions are integrated together to form a single grid for the flow solver. An edge based data structure is used to store the grid information to ease the handling of general polygons. Integral form of the Navier-Stokes equations makes up the governing equations. A Roe averaged Riemann solver is utilized to evaluate the numerical flux at cell faces. Higher order accuracy is achieved by applying Taylor`s series expansion to the conserved variables, and the gradient is calculated by using Green`s theorem. For the implicit scheme, the sparse matrix resulting from the linearization is solved using GMRES method. The flux Jacobians are calculated numerically or by an approximate analytic method. Results are presented to validate the current methodology.

  9. Evaluating the Information Power Grid using the NAS Grid Benchmarks

    NASA Technical Reports Server (NTRS)

    VanderWijngaartm Rob F.; Frumkin, Michael A.

    2004-01-01

    The NAS Grid Benchmarks (NGB) are a collection of synthetic distributed applications designed to rate the performance and functionality of computational grids. We compare several implementations of the NGB to determine programmability and efficiency of NASA's Information Power Grid (IPG), whose services are mostly based on the Globus Toolkit. We report on the overheads involved in porting existing NGB reference implementations to the IPG. No changes were made to the component tasks of the NGB can still be improved.

  10. Adventures in Computational Grids

    NASA Technical Reports Server (NTRS)

    Walatka, Pamela P.; Biegel, Bryan A. (Technical Monitor)

    2002-01-01

    Sometimes one supercomputer is not enough. Or your local supercomputers are busy, or not configured for your job. Or you don't have any supercomputers. You might be trying to simulate worldwide weather changes in real time, requiring more compute power than you could get from any one machine. Or you might be collecting microbiological samples on an island, and need to examine them with a special microscope located on the other side of the continent. These are the times when you need a computational grid.

  11. TASMANIAN Sparse Grids Module

    SciTech Connect

    and Drayton Munster, Miroslav Stoyanov

    2013-09-20

    Sparse Grids are the family of methods of choice for multidimensional integration and interpolation in low to moderate number of dimensions. The method is to select extend a one dimensional set of abscissas, weights and basis functions by taking a subset of all possible tensor products. The module provides the ability to create global and local approximations based on polynomials and wavelets. The software has three components, a library, a wrapper for the library that provides a command line interface via text files ad a MATLAB interface via the command line tool.

  12. TASMANIAN Sparse Grids Module

    2013-09-20

    Sparse Grids are the family of methods of choice for multidimensional integration and interpolation in low to moderate number of dimensions. The method is to select extend a one dimensional set of abscissas, weights and basis functions by taking a subset of all possible tensor products. The module provides the ability to create global and local approximations based on polynomials and wavelets. The software has three components, a library, a wrapper for the library thatmore » provides a command line interface via text files ad a MATLAB interface via the command line tool.« less

  13. The Volume Grid Manipulator (VGM): A Grid Reusability Tool

    NASA Technical Reports Server (NTRS)

    Alter, Stephen J.

    1997-01-01

    This document is a manual describing how to use the Volume Grid Manipulation (VGM) software. The code is specifically designed to alter or manipulate existing surface and volume structured grids to improve grid quality through the reduction of grid line skewness, removal of negative volumes, and adaption of surface and volume grids to flow field gradients. The software uses a command language to perform all manipulations thereby offering the capability of executing multiple manipulations on a single grid during an execution of the code. The command language can be input to the VGM code by a UNIX style redirected file, or interactively while the code is executing. The manual consists of 14 sections. The first is an introduction to grid manipulation; where it is most applicable and where the strengths of such software can be utilized. The next two sections describe the memory management and the manipulation command language. The following 8 sections describe simple and complex manipulations that can be used in conjunction with one another to smooth, adapt, and reuse existing grids for various computations. These are accompanied by a tutorial section that describes how to use the commands and manipulations to solve actual grid generation problems. The last two sections are a command reference guide and trouble shooting sections to aid in the use of the code as well as describe problems associated with generated scripts for manipulation control.

  14. When Graduate Degrees Prostitute the Educational Process: Degrees Gone Wild

    ERIC Educational Resources Information Center

    Lumadue, Richard T.

    2006-01-01

    Graduate degrees prostitute the educational process when they are sold to consumers by unaccredited degree/diploma mills as being equivalent to legitimate, bona-fide degrees awarded by accredited graduate schools. This article carefully analyzes the serious problems of bogus degrees and their association with the religious higher education…

  15. A grid quality manipulation system

    NASA Technical Reports Server (NTRS)

    Lu, Ning; Eiseman, Peter R.

    1991-01-01

    A grid quality manipulation system is described. The elements of the system are the measures by which quality is assessed, the computer graphic display of those measures, and the local grid manipulation to provide a response to the viewed quality indication. The display is an overlaid composite where the region is first covered with colors to reflect the values of the quality indicator, the grid is then placed on top of those colors, and finally a control net is placed on top of everything. The net represents the grid in terms of the control point form of algebraic grid generation. As a control point is moved, both the grid and the colored quality measures also move. This is a real time dynamic action so that the consequences of the manipulation are continuously seen.

  16. Prepares Overset Grids for Processing

    1998-04-22

    Many large and complex computational problems require multiple, structured, generically overlapped (overset) grids to obtain numerical solutions in a timely manner. BREAKUP significantly reduces required compute times by preparing overset grids for processing on massively parallel computers. BREAKUP subdivides the original grids for use on a user-specified number of parallel processors. Grid-to-grid and intragrid communications are maintained in the parallel environment via connectivity tables generated by BREAKUP. The subgrids are formed to be statically loadmore » balanced and to incur a minimum of communication between the subgrids. When the output of BREAKUP is submitted to an appropriately modified flow solver, subgrid solutions will be updated simultaneously. This contrasts to the much less efficient solution method of updating each original grid sequentially as done in the past.« less

  17. Smart Grid Enabled EVSE

    SciTech Connect

    None, None

    2014-10-15

    The combined team of GE Global Research, Federal Express, National Renewable Energy Laboratory, and Consolidated Edison has successfully achieved the established goals contained within the Department of Energy’s Smart Grid Capable Electric Vehicle Supply Equipment funding opportunity. The final program product, shown charging two vehicles in Figure 1, reduces by nearly 50% the total installed system cost of the electric vehicle supply equipment (EVSE) as well as enabling a host of new Smart Grid enabled features. These include bi-directional communications, load control, utility message exchange and transaction management information. Using the new charging system, Utilities or energy service providers will now be able to monitor transportation related electrical loads on their distribution networks, send load control commands or preferences to individual systems, and then see measured responses. Installation owners will be able to authorize usage of the stations, monitor operations, and optimally control their electricity consumption. These features and cost reductions have been developed through a total system design solution.

  18. LDCM Grid Prototype (LGP)

    NASA Technical Reports Server (NTRS)

    Weinstein, Beth; Lubelczyk, Jeff

    2006-01-01

    The LGP successfully demonstrated that grid technology could be used to create a collaboration among research scientists, their science development machines, and distributed data to create a science production system in a nationally distributed environment. Grid technology provides a low cost and effective method of enabling production of science products by the science community. To demonstrate this, the LGP partnered with NASA GSFC scientists and used their existing science algorithms to generate virtual Landsat-like data products using distributed data resources. LGP created 48 output composite scenes with 4 input scenes each for a total of 192 scienes processed in parallel. The demonstration took 12 hours, which beat the requirement by almost 50 percent, well within the LDCM requirement to process 250 scenes per day. The LGP project also showed the successful use of workflow tools to automate the processing. Investing in this technology has led to funding for a ROSES ACCESS proposal. The proposal intends to enable an expert science user to produce products from a number of similar distributed instrument data sets using the Land Cover Change Community-based Processing and Analysis System (LC-ComPS) Toolbox. The LC-ComPS Toolbox is a collection of science algorithms that enable the generation of data with ground resolution on the order of Landsat-class instruments.

  19. Grid-Enabled Measures

    PubMed Central

    Moser, Richard P.; Hesse, Bradford W.; Shaikh, Abdul R.; Courtney, Paul; Morgan, Glen; Augustson, Erik; Kobrin, Sarah; Levin, Kerry; Helba, Cynthia; Garner, David; Dunn, Marsha; Coa, Kisha

    2011-01-01

    Scientists are taking advantage of the Internet and collaborative web technology to accelerate discovery in a massively connected, participative environment —a phenomenon referred to by some as Science 2.0. As a new way of doing science, this phenomenon has the potential to push science forward in a more efficient manner than was previously possible. The Grid-Enabled Measures (GEM) database has been conceptualized as an instantiation of Science 2.0 principles by the National Cancer Institute with two overarching goals: (1) Promote the use of standardized measures, which are tied to theoretically based constructs; and (2) Facilitate the ability to share harmonized data resulting from the use of standardized measures. This is done by creating an online venue connected to the Cancer Biomedical Informatics Grid (caBIG®) where a virtual community of researchers can collaborate together and come to consensus on measures by rating, commenting and viewing meta-data about the measures and associated constructs. This paper will describe the web 2.0 principles on which the GEM database is based, describe its functionality, and discuss some of the important issues involved with creating the GEM database, such as the role of mutually agreed-on ontologies (i.e., knowledge categories and the relationships among these categories— for data sharing). PMID:21521586

  20. Grid Task Execution

    NASA Technical Reports Server (NTRS)

    Hu, Chaumin

    2007-01-01

    IPG Execution Service is a framework that reliably executes complex jobs on a computational grid, and is part of the IPG service architecture designed to support location-independent computing. The new grid service enables users to describe the platform on which they need a job to run, which allows the service to locate the desired platform, configure it for the required application, and execute the job. After a job is submitted, users can monitor it through periodic notifications, or through queries. Each job consists of a set of tasks that performs actions such as executing applications and managing data. Each task is executed based on a starting condition that is an expression of the states of other tasks. This formulation allows tasks to be executed in parallel, and also allows a user to specify tasks to execute when other tasks succeed, fail, or are canceled. The two core components of the Execution Service are the Task Database, which stores tasks that have been submitted for execution, and the Task Manager, which executes tasks in the proper order, based on the user-specified starting conditions, and avoids overloading local and remote resources while executing tasks.

  1. On unstructured grids and solvers

    NASA Technical Reports Server (NTRS)

    Barth, T. J.

    1990-01-01

    The fundamentals and the state-of-the-art technology for unstructured grids and solvers are highlighted. Algorithms and techniques pertinent to mesh generation are discussed. It is shown that grid generation and grid manipulation schemes rely on fast multidimensional searching. Flow solution techniques for the Euler equations, which can be derived from the integral form of the equations are discussed. Sample calculations are also provided.

  2. Algebraic grid generation using tensor product B-splines. Ph.D. Thesis

    NASA Technical Reports Server (NTRS)

    Saunders, B. V.

    1985-01-01

    Finite difference methods are more successful if the accompanying grid has lines which are smooth and nearly orthogonal. The development of an algorithm which produces such a grid when given the boundary description. Topological considerations in structuring the grid generation mapping are discussed. The concept of the degree of a mapping and how it can be used to determine what requirements are necessary if a mapping is to produce a suitable grid is examined. The grid generation algorithm uses a mapping composed of bicubic B-splines. Boundary coefficients are chosen so that the splines produce Schoenberg's variation diminishing spline approximation to the boundary. Interior coefficients are initially chosen to give a variation diminishing approximation to the transfinite bilinear interpolant of the function mapping the boundary of the unit square onto the boundary grid. The practicality of optimizing the grid by minimizing a functional involving the Jacobian of the grid generation mapping at each interior grid point and the dot product of vectors tangent to the grid lines is investigated. Grids generated by using the algorithm are presented.

  3. OGC and Grid Interoperability in enviroGRIDS Project

    NASA Astrophysics Data System (ADS)

    Gorgan, Dorian; Rodila, Denisa; Bacu, Victor; Giuliani, Gregory; Ray, Nicolas

    2010-05-01

    EnviroGRIDS (Black Sea Catchment Observation and Assessment System supporting Sustainable Development) [1] is a 4-years FP7 Project aiming to address the subjects of ecologically unsustainable development and inadequate resource management. The project develops a Spatial Data Infrastructure of the Black Sea Catchment region. The geospatial technologies offer very specialized functionality for Earth Science oriented applications as well as the Grid oriented technology that is able to support distributed and parallel processing. One challenge of the enviroGRIDS project is the interoperability between geospatial and Grid infrastructures by providing the basic and the extended features of the both technologies. The geospatial interoperability technology has been promoted as a way of dealing with large volumes of geospatial data in distributed environments through the development of interoperable Web service specifications proposed by the Open Geospatial Consortium (OGC), with applications spread across multiple fields but especially in Earth observation research. Due to the huge volumes of data available in the geospatial domain and the additional introduced issues (data management, secure data transfer, data distribution and data computation), the need for an infrastructure capable to manage all those problems becomes an important aspect. The Grid promotes and facilitates the secure interoperations of geospatial heterogeneous distributed data within a distributed environment, the creation and management of large distributed computational jobs and assures a security level for communication and transfer of messages based on certificates. This presentation analysis and discusses the most significant use cases for enabling the OGC Web services interoperability with the Grid environment and focuses on the description and implementation of the most promising one. In these use cases we give a special attention to issues such as: the relations between computational grid and

  4. Grid Generation Techniques Utilizing the Volume Grid Manipulator

    NASA Technical Reports Server (NTRS)

    Alter, Stephen J.

    1998-01-01

    This paper presents grid generation techniques available in the Volume Grid Manipulation (VGM) code. The VGM code is designed to manipulate existing line, surface and volume grids to improve the quality of the data. It embodies an easy to read rich language of commands that enables such alterations as topology changes, grid adaption and smoothing. Additionally, the VGM code can be used to construct simplified straight lines, splines, and conic sections which are common curves used in the generation and manipulation of points, lines, surfaces and volumes (i.e., grid data). These simple geometric curves are essential in the construction of domain discretizations for computational fluid dynamic simulations. By comparison to previously established methods of generating these curves interactively, the VGM code provides control of slope continuity and grid point-to-point stretchings as well as quick changes in the controlling parameters. The VGM code offers the capability to couple the generation of these geometries with an extensive manipulation methodology in a scripting language. The scripting language allows parametric studies of a vehicle geometry to be efficiently performed to evaluate favorable trends in the design process. As examples of the powerful capabilities of the VGM code, a wake flow field domain will be appended to an existing X33 Venturestar volume grid; negative volumes resulting from grid expansions to enable flow field capture on a simple geometry, will be corrected; and geometrical changes to a vehicle component of the X33 Venturestar will be shown.

  5. From the grid to the smart grid, topologically

    NASA Astrophysics Data System (ADS)

    Pagani, Giuliano Andrea; Aiello, Marco

    2016-05-01

    In its more visionary acceptation, the smart grid is a model of energy management in which the users are engaged in producing energy as well as consuming it, while having information systems fully aware of the energy demand-response of the network and of dynamically varying prices. A natural question is then: to make the smart grid a reality will the distribution grid have to be upgraded? We assume a positive answer to the question and we consider the lower layers of medium and low voltage to be the most affected by the change. In our previous work, we analyzed samples of the Dutch distribution grid (Pagani and Aiello, 2011) and we considered possible evolutions of these using synthetic topologies modeled after studies of complex systems in other technological domains (Pagani and Aiello, 2014). In this paper, we take an extra important step by defining a methodology for evolving any existing physical power grid to a good smart grid model, thus laying the foundations for a decision support system for utilities and governmental organizations. In doing so, we consider several possible evolution strategies and apply them to the Dutch distribution grid. We show how increasing connectivity is beneficial in realizing more efficient and reliable networks. Our proposal is topological in nature, enhanced with economic considerations of the costs of such evolutions in terms of cabling expenses and economic benefits of evolving the grid.

  6. NAS Grid Benchmarks: A Tool for Grid Space Exploration

    NASA Technical Reports Server (NTRS)

    Frumkin, Michael; VanderWijngaart, Rob F.; Biegel, Bryan (Technical Monitor)

    2001-01-01

    We present an approach for benchmarking services provided by computational Grids. It is based on the NAS Parallel Benchmarks (NPB) and is called NAS Grid Benchmark (NGB) in this paper. We present NGB as a data flow graph encapsulating an instance of an NPB code in each graph node, which communicates with other nodes by sending/receiving initialization data. These nodes may be mapped to the same or different Grid machines. Like NPB, NGB will specify several different classes (problem sizes). NGB also specifies the generic Grid services sufficient for running the bench-mark. The implementor has the freedom to choose any specific Grid environment. However, we describe a reference implementation in Java, and present some scenarios for using NGB.

  7. The Open Science Grid

    SciTech Connect

    Pordes, Ruth; Kramer, Bill; Olson, Doug; Livny, Miron; Roy, Alain; Avery, Paul; Blackburn, Kent; Wenaus, Torre; Wurthwein, Frank; Gardner, Rob; Wilde, Mike; /Chicago U. /Indiana U.

    2007-06-01

    The Open Science Grid (OSG) provides a distributed facility where the Consortium members provide guaranteed and opportunistic access to shared computing and storage resources. OSG provides support for and evolution of the infrastructure through activities that cover operations, security, software, troubleshooting, addition of new capabilities, and support for existing and engagement with new communities. The OSG SciDAC-2 project provides specific activities to manage and evolve the distributed infrastructure and support its use. The innovative aspects of the project are the maintenance and performance of a collaborative (shared & common) petascale national facility over tens of autonomous computing sites, for many hundreds of users, transferring terabytes of data a day, executing tens of thousands of jobs a day, and providing robust and usable resources for scientific groups of all types and sizes. More information can be found at the OSG web site: www.opensciencegrid.org.

  8. Penetration of wind electric conversion systems into the utility grid

    SciTech Connect

    Vachtsevanos, G.J.; Kalaitzakis, K.C.

    1985-07-01

    This paper is concerned with the development of appropriate models for the interconnected operation of wind generator clusters with an autonomous power system and simulation techniques for the study of the degree of penetration of such wind electric conversion devices when operating in parallel with the utility grid. The quality of the interconnected system performance is specified in terms of operational constraints and the resultant penetration strategy is implemented via a microprocessor-based control scheme. The strategy assures a satisfactory level of system performance while optimizing the available energy transfer from the wind generators to the utility grid.

  9. TIGER: Turbomachinery interactive grid generation

    NASA Technical Reports Server (NTRS)

    Soni, Bharat K.; Shih, Ming-Hsin; Janus, J. Mark

    1992-01-01

    A three dimensional, interactive grid generation code, TIGER, is being developed for analysis of flows around ducted or unducted propellers. TIGER is a customized grid generator that combines new technology with methods from general grid generation codes. The code generates multiple block, structured grids around multiple blade rows with a hub and shroud for either C grid or H grid topologies. The code is intended for use with a Euler/Navier-Stokes solver also being developed, but is general enough for use with other flow solvers. TIGER features a silicon graphics interactive graphics environment that displays a pop-up window, graphics window, and text window. The geometry is read as a discrete set of points with options for several industrial standard formats and NASA standard formats. Various splines are available for defining the surface geometries. Grid generation is done either interactively or through a batch mode operation using history files from a previously generated grid. The batch mode operation can be done either with a graphical display of the interactive session or with no graphics so that the code can be run on another computer system. Run time can be significantly reduced by running on a Cray-YMP.

  10. Grid generation using classical techniques

    NASA Technical Reports Server (NTRS)

    Moretti, G.

    1980-01-01

    A brief historical review of conformal mapping and its applications to problems in fluid mechanics and electromagnetism is presented. The use of conformal mapping as a grid generator is described. The philosophy of the 'closed form' approach and its application to a Neumann problem is discussed. Karman-Trefftz mappings and grids for ablated, three dimensional bodies are also discussed.

  11. LAPS Grid generation and adaptation

    NASA Astrophysics Data System (ADS)

    Pagliantini, Cecilia; Delzanno, Gia Luca; Guo, Zehua; Srinivasan, Bhuvana; Tang, Xianzhu; Chacon, Luis

    2011-10-01

    LAPS uses a common-data framework in which a general purpose grid generation and adaptation package in toroidal and simply connected domains is implemented. The initial focus is on implementing the Winslow/Laplace-Beltrami method for generating non-overlapping block structured grids. This is to be followed by a grid adaptation scheme based on Monge-Kantorovich optimal transport method [Delzanno et al., J. Comput. Phys,227 (2008), 9841-9864], that equidistributes application-specified error. As an initial set of applications, we will lay out grids for an axisymmetric mirror, a field reversed configuration, and an entire poloidal cross section of a tokamak plasma reconstructed from a CMOD experimental shot. These grids will then be used for computing the plasma equilibrium and transport in accompanying presentations. A key issue for Monge-Kantorovich grid optimization is the choice of error or monitor function for equi-distribution. We will compare the Operator Recovery Error Source Detector (ORESD) [Lapenta, Int. J. Num. Meth. Eng,59 (2004) 2065-2087], the Tau method and a strategy based on the grid coarsening [Zhang et al., AIAA J,39 (2001) 1706-1715] to find an ``optimal'' grid. Work supported by DOE OFES.

  12. Structured and unstructured grid generation.

    PubMed

    Thompson, J F; Weatherill, N P

    1992-01-01

    Current techniques in composite-block-structured grid generation and unstructured grid generation for general 3D geometries are summarized, including both algebraic and elliptic generation procedures for the former and Delaunay tessellations for the latter. Citations of relevant theory are given. Examples of applications for several geometries are included. PMID:1424687

  13. Intelligent automated surface grid generation

    NASA Technical Reports Server (NTRS)

    Yao, Ke-Thia; Gelsey, Andrew

    1995-01-01

    The goal of our research is to produce a flexible, general grid generator for automated use by other programs, such as numerical optimizers. The current trend in the gridding field is toward interactive gridding. Interactive gridding more readily taps into the spatial reasoning abilities of the human user through the use of a graphical interface with a mouse. However, a sometimes fruitful approach to generating new designs is to apply an optimizer with shape modification operators to improve an initial design. In order for this approach to be useful, the optimizer must be able to automatically grid and evaluate the candidate designs. This paper describes and intelligent gridder that is capable of analyzing the topology of the spatial domain and predicting approximate physical behaviors based on the geometry of the spatial domain to automatically generate grids for computational fluid dynamics simulators. Typically gridding programs are given a partitioning of the spatial domain to assist the gridder. Our gridder is capable of performing this partitioning. This enables the gridder to automatically grid spatial domains of wide range of configurations.

  14. Some Observations on Grid Convergence

    NASA Technical Reports Server (NTRS)

    Salas, manuel D.

    2006-01-01

    It is claimed that current practices in grid convergence studies, particularly in the field of external aerodynamics, are flawed. The necessary conditions to properly establish grid convergence are presented. A theoretical model and a numerical example are used to demonstrate these ideas.

  15. DNS of vibrating grid turbulence

    NASA Astrophysics Data System (ADS)

    Khujadze, G.; Oberlack, M.

    Direct numerical simulation of the turbulence generated at a grid vibrating normally to itself using spectral code [1] is presented. Due to zero mean shear there is no production of turbulence apart from the grid. Action of the grid is mimiced by the function implemented in the middle of the simulation box:f_i (x_1 ,x_2 ) = {n^2 S}/2left\\{ {left| {{δ _{i3} }/4\\cos left( {{2π }/Mx_1 } right)\\cos left. {left( {{2π }/Mx_2 } right)} right|} right.sin (nt) + {β _i }/4} right\\}, where M is the mesh size, S/2 - amplitude or stroke of the grid, n - frequency. β i are random numbers with uniform distribution. The simulations were performed for the following parameters: x 1, x 2 ∈ [-π; π], x 3 ∈ [-2π; 2π]; Re = nS 2/? = 1000; S/M = 2; Numerical grid: 128 × 128 × 256.

  16. DNS of vibrating grid turbulence

    NASA Astrophysics Data System (ADS)

    Khujadze, G.; Oberlack, M.

    Direct numerical simulation of the turbulence generated at a grid vibrating normally to itself using spectral code [1] is presented. Due to zero mean shear there is no production of turbulence apart from the grid. Action of the grid is mimiced by the function implemented in the middle of the simulation box:f_i (x_1 ,x_2 ) = {n^2 S}/2left{ {left| {{δ _{i3} }/4\\cos left( {{2π }/Mx_1 } right)\\cos left. {left( {{2π }/Mx_2 } right)} right|} right.sin (nt) + {β _i }/4} right}, where M is the mesh size, S/2 - amplitude or stroke of the grid, n - frequency. β i are random numbers with uniform distribution. The simulations were performed for the following parameters: x 1, x 2 ∈ [-π; π], x 3 ∈ [-2π; 2π]; Re = nS 2/? = 1000; S/M = 2; Numerical grid: 128 × 128 × 256.

  17. Two Universities, Two Degrees: A Dual Degree Program for Pharmacists.

    ERIC Educational Resources Information Center

    Milio, Frank

    2001-01-01

    Describes a dual degree program between Towson University and the University of Maryland School of Pharmacy, which allows a student to receive both a B.S. degree in Medicinal Chemistry and a Doctor of Pharmacy degree in a combined 7-year program. It also allows flexibility in pursuing alternate career goals. (EV)

  18. 360-degree Color Panorama

    NASA Technical Reports Server (NTRS)

    1997-01-01

    This is a 'geometrically improved' version of the 360- degree panorama heretofore known as the 'Gallery Pan', the first contiguous, uniform panorama taken by the Imager for Mars Pathfinder (IMP) over the course of Sols 8, 9, and 10. Different regions were imaged at different times over the three Martian days to acquire consistent lighting and shadow conditions for all areas of the panorama.

    The IMP is a stereo imaging system that, in its fully deployed configuration, stands 1.8 meters above the Martian surface, and has a resolution of two millimeters at a range of two meters. In this geometrically improved version of the panorama, distortion due to a 2.5 degree tilt in the IMP camera mast has been removed, effectively flattening the horizon.

    The IMP has color capability provided by 24 selectable filters -- twelve filters per 'eye'. Its red, green, and blue filters were used to take this image.

    At left is a Lander petal and a metallic mast which is a portion of the low-gain antenna. Misregistration in the antenna and other Lander features is due to parallax in the extreme foreground. On the horizon the double 'Twin Peaks' are visible, about 1-2 kilometers away. The rock 'Couch' is the dark, curved rock at right of Twin Peaks. Another Lander petal is at left-center, showing the fully deployed forward ramp at far left, and rear ramp at right, which rover Sojourner used to descend to the surface of Mars on July 5. Immediately to the left of the rear ramp is the rock 'Barnacle Bill', which scientists found to be andesitic, possibly indicating that it is a volcanic rock (a true andesite) or a physical mixture of particles. Just beyond Barnacle Bill, rover tracks lead to Sojourner, shown using its Alpha Proton X-Ray Spectrometer (APXS) instrument to study the large rock 'Yogi'. Yogi, low in quartz content, appears to be more primitive than Barnacle Bill, and appears more like the common basalts found on Earth.

    The tracks and circular pattern in the soil

  19. Grid Integration Studies: Data Requirements, Greening the Grid

    SciTech Connect

    Katz, Jessica

    2015-06-01

    A grid integration study is an analytical framework used to evaluate a power system with high penetration levels of variable renewable energy (VRE). A grid integration study simulates the operation of the power system under different VRE scenarios, identifying reliability constraints and evaluating the cost of actions to alleviate those constraints. These VRE scenarios establish where, how much, and over what timeframe to build generation and transmission capacity, ideally capturing the spatial diversity benefits of wind and solar resources. The results help build confidence among policymakers, system operators, and investors to move forward with plans to increase the amount of VRE on the grid.

  20. Single grid accelerator for an ion thrustor

    NASA Technical Reports Server (NTRS)

    Margosian, P. M.; Nakanishi, S. (Inventor)

    1973-01-01

    A single grid accelerator system for an ion thrustor is discussed. A layer of dielectric material is interposed between this metal grid and the chamber containing an ionized propellant for protecting the grid against sputtering erosion.

  1. Optimizing solar-cell grid geometry

    NASA Technical Reports Server (NTRS)

    Crossley, A. P.

    1969-01-01

    Trade-off analysis and mathematical expressions calculate optimum grid geometry in terms of various cell parameters. Determination of the grid geometry provides proper balance between grid resistance and cell output to optimize the energy conversion process.

  2. National Smart Water Grid

    SciTech Connect

    Beaulieu, R A

    2009-07-13

    The United States repeatedly experiences floods along the Midwest's large rivers and droughts in the arid Western States that cause traumatic environmental conditions with huge economic impact. With an integrated approach and solution these problems can be alleviated. Tapping into the Mississippi River and its tributaries, the world's third largest fresh water river system, during flood events will mitigate the damage of flooding and provide a new source of fresh water to the Western States. The trend of increased flooding on the Midwest's large rivers is supported by a growing body of scientific literature. The Colorado River Basin and the western states are experiencing a protracted multi-year drought. Fresh water can be pumped via pipelines from areas of overabundance/flood to areas of drought or high demand. Calculations document 10 to 60 million acre-feet (maf) of fresh water per flood event can be captured from the Midwest's Rivers and pumped via pipelines to the Colorado River and introduced upstream of Lake Powell, Utah, to destinations near Denver, Colorado, and used in areas along the pipelines. Water users of the Colorado River include the cities in southern Nevada, southern California, northern Arizona, Colorado, Utah, Indian Tribes, and Mexico. The proposed start and end points, and routes of the pipelines are documented, including information on right-of-ways necessary for state and federal permits. A National Smart Water Grid{trademark} (NSWG) Project will create thousands of new jobs for construction, operation, and maintenance and save billions in drought and flood damage reparations tax dollars. The socio-economic benefits of NWSG include decreased flooding in the Midwest; increased agriculture, and recreation and tourism; improved national security, transportation, and fishery and wildlife habitats; mitigated regional climate change and global warming such as increased carbon capture; decreased salinity in Colorado River water crossing the US

  3. High energy collimating fine grids

    NASA Technical Reports Server (NTRS)

    Arrieta, Victor M.; Tuffias, Robert H.; Laferla, Raffaele

    1995-01-01

    The objective of this project was to demonstrate the fabrication of extremely tight tolerance collimating grids using a high-Z material, specifically tungsten. The approach taken was to fabricate grids by a replication method involving the coating of a silicon grid substrate with tungsten by chemical vapor deposition (CVD). A negative of the desired grid structure was fabricated in silicon using highly wafering techniques developed for the semiconductor industry and capable of producing the required tolerances. Using diamond wafering blades, a network of accurately spaced slots was machined into a single-crystal silicon surface. These slots were then filled with tungsten by CVD, via the hydrogen reduction of tungsten hexafluoride. Following tungsten deposition, the silicon negative was etched away to leave the tungsten collimating grid structure. The project was divided into five tasks: (1) identify materials of construction for the replica and final collimating grid structures; (2) identify and implement a micromachining technique for manufacturing the negative collimator replicas (performed by NASA/JPL); (3) develop a CVD technique and processing parameters suitable for the complete tungsten densification of the collimator replicas; (4) develop a chemical etching technique for the removal of the collimator replicas after the tungsten deposition process; and (5) fabricate and deliver tungsten collimating grid specimens.

  4. GridOPTICS Software System

    SciTech Connect

    Akyol, Bora A; Ciraci, PNNL Selim; Gibson, PNNL Tara; Rice, PNNL Mark; Sharma, PNNL Poorva; Yin, PNNL Jian; Allwardt, PNNL Craig; PNNL,

    2014-02-24

    GridOPTICS Software System (GOSS) is a middleware that facilitates creation of new, modular and flexible operational and planning platforms that can meet the challenges of the next generation power grid. GOSS enables Department of Energy, power system utilities, and vendors to build better tools faster. GOSS makes it possible to integrate Future Power Grid Initiative software products/prototypes into existing power grid software systems, including the PNNL PowerNet and EIOC environments. GOSS is designed to allow power grid applications developed for different underlying software platforms installed in different utilities to communicate with ease. This can be done in compliance with existing security and data sharing policies between the utilities. GOSS not only supports one-to-one data transfer between applications, but also publisher/subscriber scheme. To support interoperability requirements of future EMS, GOSS is designed for CIM compliance. In addition to this, it supports authentication and authorization capabilities to protect the system from cyber threats. In summary, the contributions of the GOSS middleware are as follows: • A platform to support future EMS development. • A middleware that promotes interoperability between power grid applications. • A distributed architecture that separates data sources from power grid applications. • Support for data exchange with either one-to-one or publisher/subscriber interfaces. • An authentication and authorization scheme for limiting the access to data between utilities.

  5. A Java commodity grid kit.

    SciTech Connect

    von Laszewski, G.; Foster, I.; Gawor, J.; Lane, P.; Mathematics and Computer Science

    2001-07-01

    In this paper we report on the features of the Java Commodity Grid Kit. The Java CoG Kit provides middleware for accessing Grid functionality from the Java framework. Java CoG Kit middleware is general enough to design a variety of advanced Grid applications with quite different user requirements. Access to the Grid is established via Globus protocols, allowing the Java CoG Kit to communicate also with the C Globus reference implementation. Thus, the Java CoG Kit provides Grid developers with the ability to utilize the Grid, as well as numerous additional libraries and frameworks developed by the Java community to enable network, Internet, enterprise, and peer-to peer computing. A variety of projects have successfully used the client libraries of the Java CoG Kit to access Grids driven by the C Globus software. In this paper we also report on the efforts to develop server side Java CoG Kit components. As part of this research we have implemented a prototype pure Java resource management system that enables one to run Globus jobs on platforms on which a Java virtual machine is supported, including Windows NT machines.

  6. GridOPTICS Software System

    2014-02-24

    GridOPTICS Software System (GOSS) is a middleware that facilitates creation of new, modular and flexible operational and planning platforms that can meet the challenges of the next generation power grid. GOSS enables Department of Energy, power system utilities, and vendors to build better tools faster. GOSS makes it possible to integrate Future Power Grid Initiative software products/prototypes into existing power grid software systems, including the PNNL PowerNet and EIOC environments. GOSS is designed to allowmore » power grid applications developed for different underlying software platforms installed in different utilities to communicate with ease. This can be done in compliance with existing security and data sharing policies between the utilities. GOSS not only supports one-to-one data transfer between applications, but also publisher/subscriber scheme. To support interoperability requirements of future EMS, GOSS is designed for CIM compliance. In addition to this, it supports authentication and authorization capabilities to protect the system from cyber threats. In summary, the contributions of the GOSS middleware are as follows: • A platform to support future EMS development. • A middleware that promotes interoperability between power grid applications. • A distributed architecture that separates data sources from power grid applications. • Support for data exchange with either one-to-one or publisher/subscriber interfaces. • An authentication and authorization scheme for limiting the access to data between utilities.« less

  7. Absorption Oscillator Strengths for the c4‧1Σu+(3, 4, 6)-X1Σg+(v‧‧), b‧1Σu+(10, 13, 20)-X1Σg+(v‧‧), and c5‧1Σu+(1)-X1Σg+(v‧‧) Progressions in N2

    NASA Astrophysics Data System (ADS)

    Lavín, C.; Velasco, A. M.

    2016-01-01

    Absorption oscillator strengths, calculated with the molecular quantum defect orbital method, for the c4'1 Σu+(3)-X1Σg+ (v\\prime\\prime = 0-12), c4'1Σu+(4) -X1Σg+(v\\prime\\prime = 0-12), c4'1Σu+(6)- X1Σg+(v\\prime\\prime = 0-12), b\\prime 1Σu+(10)- X1Σg+(v\\prime\\prime = 0-12), b\\prime 1Σu+(13)- X1Σg+(v\\prime\\prime = 0-12), b\\prime 1Σu+(20)- X1Σg+(v\\prime\\prime = 0-12), and c5'1Σu+(1)- X1Σg+(v\\prime\\prime = 0-12) bands of molecular nitrogen are reported. The Rydberg-valence interaction between states of 1Σu+ symmetry has been treated through an interaction matrix that includes vibrational coupling. Due to the homogeneous interaction, the intensity distribution of the bands within each progression deviates from the Franck-Condon predictions. The present results for vibronic transitions from the X1Σg+(0) ground state agree rather well with reported high-resolution measurements. As far as we know, f-values for bands originating from v″ > 0 vibrational levels of the electronic ground state are reported here for the first time. These data may be useful in the interpretation of the extreme ultraviolet spectra from Earth’s and Titan’s atmospheres, in which several bands of the c4\\prime (3), c4\\prime (4), and c4\\prime (6) progressions have been identified.

  8. Chromosome studies in the red howler monkey, Alouatta seniculus stramineus (Platyrrhini, Primates): description of an X1X2Y1Y2/X1X1X2X2 sex-chromosome system and karyological comparisons with other subspecies.

    PubMed

    Lima, M M; Seuánez, H N

    1991-01-01

    In the red howler monkey, Alouatta seniculus stramineus (2n = 47, 48, or 49), variations in diploid chromosome number are due to different numbers of microchromosomes. Males exhibit a Y;autosome translocation involving the short arm of an individual biarmed autosome. Consequently, the sex-chromosome constitution in the male is X1X2Y1Y2, with X1 representing the original X chromosome, X2 the biarmed autosome (No. 7), Y1 the Y;7p translocation product, and Y2 the acrocentric homolog of 7q. In the first meiotic division, a quadrivalent with a chain configuration can be observed in spermatocytes. Females have an X1X1X2X2 sex-chromosome constitution. Chromosome heteromorphisms were observed in pair 13, due to a pericentric inversion, and pair 19, due to the presence of constitutive heterochromatin. Microchromosomes, which varied in number between individuals, were also heterochromatic. NOR-staining was observed at two separate sites on a single chromosome pair (No. 10). A comparison of A.s. stramineus with A.s. macconnelli shows that these two subspecies have identical diploid chromosome numbers (47, 48, or 49), again due to a varying number of microchromosomes, and that they share a similar sex-chromosome constitution. Their karyotypes, however, are not identical, but can be derived from each other by a reciprocal translocation. Further comparisons with other A. seniculus subspecies reported in the literature indicate that this taxon is not karyologically uniform and that substantial chromosome shuffling has occurred between populations that have been considered to be subspecies by taxonomic criteria based on their morphometric attributes. PMID:1914523

  9. Foundation Degrees: A Risky Business?

    ERIC Educational Resources Information Center

    Rowley, Jennifer

    2005-01-01

    Purpose: Foundation degrees, the new proposal for sub-degree vocational education in the UK, are characterised by innovation both in their design (curriculum, teaching, learning and assessment) and in the marketplace for which they are designed. This article argues that the development and delivery of foundation degrees carry a high level of risk,…

  10. Top 100--Graduate Degree Producers

    ERIC Educational Resources Information Center

    Borden, Victor M. H.

    2009-01-01

    The Top 100 degree tables published in this edition of Diverse, and the many more detailed tables included on the Diverse Web site, delineate the institutions that have conferred the most master's, doctoral and first professional degrees to students of color in academic year 2007-2008. Each table shows the number of degrees for a specific minority…

  11. Students' Perceptions of Foundation Degrees

    ERIC Educational Resources Information Center

    Ooms, A.; Burke, L. M.; Marks-Maran, D. J.; Webb, M.; Cooper, D.

    2012-01-01

    In 2008 there were 87,339 people enrolled on foundation degrees (FDs) in the UK (Foundation Degree Forward, 2009), and educational institutions in the UK offered 1700 different foundation degrees in over 25 subjects, with nearly 900 more in development (Action on Access, 2010). In addition, student views are seen to be of importance, as…

  12. Grid Visualization Tool

    NASA Technical Reports Server (NTRS)

    Chouinard, Caroline; Fisher, Forest; Estlin, Tara; Gaines, Daniel; Schaffer, Steven

    2005-01-01

    The Grid Visualization Tool (GVT) is a computer program for displaying the path of a mobile robotic explorer (rover) on a terrain map. The GVT reads a map-data file in either portable graymap (PGM) or portable pixmap (PPM) format, representing a gray-scale or color map image, respectively. The GVT also accepts input from path-planning and activity-planning software. From these inputs, the GVT generates a map overlaid with one or more rover path(s), waypoints, locations of targets to be explored, and/or target-status information (indicating success or failure in exploring each target). The display can also indicate different types of paths or path segments, such as the path actually traveled versus a planned path or the path traveled to the present position versus planned future movement along a path. The program provides for updating of the display in real time to facilitate visualization of progress. The size of the display and the map scale can be changed as desired by the user. The GVT was written in the C++ language using the Open Graphics Library (OpenGL) software. It has been compiled for both Sun Solaris and Linux operating systems.

  13. Symbolic Constraint Maintenance Grid

    NASA Technical Reports Server (NTRS)

    James, Mark

    2006-01-01

    Version 3.1 of Symbolic Constraint Maintenance Grid (SCMG) is a software system that provides a general conceptual framework for utilizing pre-existing programming techniques to perform symbolic transformations of data. SCMG also provides a language (and an associated communication method and protocol) for representing constraints on the original non-symbolic data. SCMG provides a facility for exchanging information between numeric and symbolic components without knowing the details of the components themselves. In essence, it integrates symbolic software tools (for diagnosis, prognosis, and planning) with non-artificial-intelligence software. SCMG executes a process of symbolic summarization and monitoring of continuous time series data that are being abstractly represented as symbolic templates of information exchange. This summarization process enables such symbolic- reasoning computing systems as artificial- intelligence planning systems to evaluate the significance and effects of channels of data more efficiently than would otherwise be possible. As a result of the increased efficiency in representation, reasoning software can monitor more channels and is thus able to perform monitoring and control functions more effectively.

  14. National transmission grid study

    SciTech Connect

    Abraham, Spencer

    2003-05-31

    The National Energy Policy Plan directed the U.S. Department of Energy (DOE) to conduct a study to examine the benefits of establishing a national electricity transmission grid and to identify transmission bottlenecks and measures to address them. DOE began by conducting an independent analysis of U.S. electricity markets and identifying transmission system bottlenecks using DOE’s Policy Office Electricity Modeling System (POEMS). DOE’s analysis, presented in Section 2, confirms the central role of the nation’s transmission system in lowering costs to consumers through increased trade. More importantly, DOE’s analysis also confirms the results of previous studies, which show that transmission bottlenecks and related transmission system market practices are adding hundreds of millions of dollars to consumers’ electricity bills each year. A more detailed technical overview of the use of POEMS is provided in Appendix A. DOE led an extensive, open, public input process and heard a wide range of comments and recommendations that have all been considered.1 More than 150 participants registered for three public workshops held in Detroit, MI (September 24, 2001); Atlanta, GA (September 26, 2001); and Phoenix, AZ (September 28, 2001).

  15. Buildings-to-Grid Technical Opportunities: From the Grid Perspective

    SciTech Connect

    Kropski, Ben; Pratt, Rob

    2014-03-28

    This paper outlines the nature of the power grid, lists challenges and barriers to the implementation of a transactive energy ecosystem, and provides concept solutions to current technological impediments.

  16. Graduate Physics Degrees: Largest Departments and Degree Distribution. Focus On

    ERIC Educational Resources Information Center

    Mulvey, Patrick J.; Nicholson, Starr

    2014-01-01

    In the 2011-12 academic year there were 751 degree-granting physics departments in the U.S. Of these, 195 offered a PhD and 62 departments offered a master's as the highest physics degree. The remaining 494 departments offered a bachelor's as their highest physics degree. There were six universities that had two doctoral-granting physics…

  17. Smart Wire Grid: Resisting Expectations

    SciTech Connect

    Ramsay, Stewart; Lowe, DeJim

    2014-03-03

    Smart Wire Grid's DSR technology (Discrete Series Reactor) can be quickly deployed on electrical transmission lines to create intelligent mesh networks capable of quickly rerouting electricity to get power where and when it's needed the most. With their recent ARPA-E funding, Smart Wire Grid has been able to move from prototype and field testing to building out a US manufacturing operation in just under a year.

  18. Smart Wire Grid: Resisting Expectations

    ScienceCinema

    Ramsay, Stewart; Lowe, DeJim

    2014-04-09

    Smart Wire Grid's DSR technology (Discrete Series Reactor) can be quickly deployed on electrical transmission lines to create intelligent mesh networks capable of quickly rerouting electricity to get power where and when it's needed the most. With their recent ARPA-E funding, Smart Wire Grid has been able to move from prototype and field testing to building out a US manufacturing operation in just under a year.

  19. Parallel Power Grid Simulation Toolkit

    SciTech Connect

    Smith, Steve; Kelley, Brian; Banks, Lawrence; Top, Philip; Woodward, Carol

    2015-09-14

    ParGrid is a 'wrapper' that integrates a coupled Power Grid Simulation toolkit consisting of a library to manage the synchronization and communication of independent simulations. The included library code in ParGid, named FSKIT, is intended to support the coupling multiple continuous and discrete even parallel simulations. The code is designed using modern object oriented C++ methods utilizing C++11 and current Boost libraries to ensure compatibility with multiple operating systems and environments.

  20. Discretization formulas for unstructured grids

    NASA Technical Reports Server (NTRS)

    Baumeister, Kenneth J.

    1988-01-01

    The Galerkin weighted residual technique using linear triangular weight functions is employed to develop finite difference formula in cartesian coordinates for the Laplacian operator, first derivative operators and the function for unstructured triangular grids. The weighted residual coefficients associated with the weak formulation of the Laplacian operator are shown to agree with the Taylor series approach on a global average. In addition, a simple algorithm is presented to determine the Voronoi (finite difference) area of an unstructured grid.

  1. Reinventing Batteries for Grid Storage

    ScienceCinema

    Banerjee, Sanjoy

    2013-05-29

    The City University of New York's Energy Institute, with the help of ARPA-E funding, is creating safe, low cost, rechargeable, long lifecycle batteries that could be used as modular distributed storage for the electrical grid. The batteries could be used at the building level or the utility level to offer benefits such as capture of renewable energy, peak shaving and microgridding, for a safer, cheaper, and more secure electrical grid.

  2. Multi baseline Grid Software Correlator

    NASA Astrophysics Data System (ADS)

    Moritaka, Kimura; Nakajima, Junichi; Kondo, Tetsuro

    Software VLBI correlation is regarded as a solution for next generation VLBI. With a flexibility of the software correlation programming, appropriate scientific correlations by scientists are possible as well as the post processing. As the first experiment to handle Gbps VLBI data, multi baseline Grid correlator have been developing at CRL. The performance of software correlation adopted multi CPUs, SIMD architectures and Grid computing technology has nearly reached hardware correlator performance.

  3. Reinventing Batteries for Grid Storage

    SciTech Connect

    Banerjee, Sanjoy

    2012-01-01

    The City University of New York's Energy Institute, with the help of ARPA-E funding, is creating safe, low cost, rechargeable, long lifecycle batteries that could be used as modular distributed storage for the electrical grid. The batteries could be used at the building level or the utility level to offer benefits such as capture of renewable energy, peak shaving and microgridding, for a safer, cheaper, and more secure electrical grid.

  4. AstroGrid-D: Grid technology for astronomical science

    NASA Astrophysics Data System (ADS)

    Enke, Harry; Steinmetz, Matthias; Adorf, Hans-Martin; Beck-Ratzka, Alexander; Breitling, Frank; Brüsemeister, Thomas; Carlson, Arthur; Ensslin, Torsten; Högqvist, Mikael; Nickelt, Iliya; Radke, Thomas; Reinefeld, Alexander; Reiser, Angelika; Scholl, Tobias; Spurzem, Rainer; Steinacker, Jürgen; Voges, Wolfgang; Wambsganß, Joachim; White, Steve

    2011-02-01

    We present status and results of AstroGrid-D, a joint effort of astrophysicists and computer scientists to employ grid technology for scientific applications. AstroGrid-D provides access to a network of distributed machines with a set of commands as well as software interfaces. It allows simple use of computer and storage facilities and to schedule or monitor compute tasks and data management. It is based on the Globus Toolkit middleware (GT4). Chapter 1 describes the context which led to the demand for advanced software solutions in Astrophysics, and we state the goals of the project. We then present characteristic astrophysical applications that have been implemented on AstroGrid-D in chapter 2. We describe simulations of different complexity, compute-intensive calculations running on multiple sites (Section 2.1), and advanced applications for specific scientific purposes (Section 2.2), such as a connection to robotic telescopes (Section 2.2.3). We can show from these examples how grid execution improves e.g. the scientific workflow. Chapter 3 explains the software tools and services that we adapted or newly developed. Section 3.1 is focused on the administrative aspects of the infrastructure, to manage users and monitor activity. Section 3.2 characterises the central components of our architecture: The AstroGrid-D information service to collect and store metadata, a file management system, the data management system, and a job manager for automatic submission of compute tasks. We summarise the successfully established infrastructure in chapter 4, concluding with our future plans to establish AstroGrid-D as a platform of modern e-Astronomy.

  5. Scalable hybrid unstructured and structured grid raycasting.

    PubMed

    Muigg, Philipp; Hadwiger, Markus; Doleisch, Helmut; Hauser, Helwig

    2007-01-01

    This paper presents a scalable framework for real-time raycasting of large unstructured volumes that employs a hybrid bricking approach. It adaptively combines original unstructured bricks in important (focus) regions, with structured bricks that are resampled on demand in less important (context) regions. The basis of this focus+context approach is interactive specification of a scalar degree of interest (DOI) function. Thus, rendering always considers two volumes simultaneously: a scalar data volume, and the current DOI volume. The crucial problem of visibility sorting is solved by raycasting individual bricks and compositing in visibility order from front to back. In order to minimize visual errors at the grid boundary, it is always rendered accurately, even for resampled bricks. A variety of different rendering modes can be combined, including contour enhancement. A very important property of our approach is that it supports a variety of cell types natively, i.e., it is not constrained to tetrahedral grids, even when interpolation within cells is used. Moreover, our framework can handle multi-variate data, e.g., multiple scalar channels such as temperature or pressure, as well as time-dependent data. The combination of unstructured and structured bricks with different quality characteristics such as the type of interpolation or resampling resolution in conjunction with custom texture memory management yields a very scalable system. PMID:17968114

  6. Grid-Optimization Program for Photovoltaic Cells

    NASA Technical Reports Server (NTRS)

    Daniel, R. E.; Lee, T. S.

    1986-01-01

    CELLOPT program developed to assist in designing grid pattern of current-conducting material on photovoltaic cell. Analyzes parasitic resistance losses and shadow loss associated with metallized grid pattern on both round and rectangular solar cells. Though performs sensitivity studies, used primarily to optimize grid design in terms of bus bar and grid lines by minimizing power loss. CELLOPT written in APL.

  7. A paradigm for parallel unstructured grid generation

    SciTech Connect

    Gaither, A.; Marcum, D.; Reese, D.

    1996-12-31

    In this paper, a sequential 2D unstructured grid generator based on iterative point insertion and local reconnection is coupled with a Delauney tessellation domain decomposition scheme to create a scalable parallel unstructured grid generator. The Message Passing Interface (MPI) is used for distributed communication in the parallel grid generator. This work attempts to provide a generic framework to enable the parallelization of fast sequential unstructured grid generators in order to compute grand-challenge scale grids for Computational Field Simulation (CFS). Motivation for moving from sequential to scalable parallel grid generation is presented. Delaunay tessellation and iterative point insertion and local reconnection (advancing front method only) unstructured grid generation techniques are discussed with emphasis on how these techniques can be utilized for parallel unstructured grid generation. Domain decomposition techniques are discussed for both Delauney and advancing front unstructured grid generation with emphasis placed on the differences needed for both grid quality and algorithmic efficiency.

  8. Ion beamlet vectoring by grid translation

    NASA Technical Reports Server (NTRS)

    Homa, J. M.; Wilbur, P. J.

    1982-01-01

    Ion beamlet vectoring is investigated by collecting deflection and divergence angle data for two-grid systems as a function of the relative displacement of these grids. Results show that at large displacements, accelerator grid impingement becomes a limiting factor and this determines the useful range of beamlet deflection. Beamlet deflection was shown to vary linearly with grid offset angle over this range. Values of deflection-to-offset angle ratio and useful range of deflection are presented as functions of grid-hole geometries, perveance levels, and accelerating voltages. It is found that the divergence of the beamlets is unaffected by deflection over the useful range of beamlet deflection. The grids of a typical dished-grid ion thruster are examined to determine where over the grid surface the grid offsets exceed the useful range, which indicates the regions on the surface where high accelerator grid impingment is probably occurring.

  9. Striped ratio grids for scatter estimation

    NASA Astrophysics Data System (ADS)

    Hsieh, Scott S.; Wang, Adam S.; Star-Lack, Josh

    2016-03-01

    Striped ratio grids are a new concept for scatter management in cone-beam CT. These grids are a modification of conventional anti-scatter grids and consist of stripes which alternate between high grid ratio and low grid ratio. Such a grid is related to existing hardware concepts for scatter estimation such as blocker-based methods or primary modulation, but rather than modulating the primary, the striped ratio grid modulates the scatter. The transitions between adjacent stripes can be used to estimate and subtract the remaining scatter. However, these transitions could be contaminated by variation in the primary radiation. We describe a simple nonlinear image processing algorithm to estimate scatter, and proceed to validate the striped ratio grid on experimental data of a pelvic phantom. The striped ratio grid is emulated by combining data from two scans with different grids. Preliminary results are encouraging and show a significant reduction of scatter artifact.

  10. CDF way to the GRID

    NASA Astrophysics Data System (ADS)

    Delli Paoli, F.

    2006-11-01

    The improvements of the peak instantaneous luminosity of the Tevatron Collider require large increases in computing requirements for the CDF experiment which has to be able to increase proportionally the amount of Monte Carlo data it produces and to satisfy the computing needs for future data analysis. This is, in turn, forcing the CDF Collaboration to move beyond the used dedicated resources and start exploiting Grid resources. CDF has been running a set of CDF Analysis Farm (CAFs), which are submission portals to dedicated pools. In this paper will be presented the CDF strategy to access Grid resources. GlideCAF, a new CAF implementation based on Condor Glide-in technology, has been developed to access resources in specific Grid Sites and is currently in production status at CNAF Tier-1 in Italy. Recently have been configured GlideCAFs also in San Diego (US), Fermilab and Lyon Tier-1 Center (France). GlideCAF model has been used also to implement OsgCAF, which is a Fermilab project to exploit OSG resources in US. LcgCAF is basically a reimplementation of the CAF model in order to access Grid resources by using the LCG/EGEE Middleware components in a total standard Grid way. LcgCAF is constituted by a set of services each of them responsible for accepting, submitting and monitoring CDF user jobs during theirs lifetimes in the Grid environment. An overview of the Grid Environment and of the specific Middleware services used will be presented; GlideCAF and LcgCAF implementations will be discussed in detail. Some details on OsgCAF project will be also given.

  11. GPM Mission Gridded Text Products Providing Surface Precipitation Retrievals

    NASA Astrophysics Data System (ADS)

    Stocker, Erich Franz; Kelley, Owen; Huffman, George; Kummerow, Christian

    2015-04-01

    constellation satellites. Both of these gridded products are generated for a .25 degree x .25 degree hourly grid, which are packaged into daily ASCII files that can downloaded from the PPS FTP site. To reduce the download size, the files are compressed using the gzip utility. This paper will focus on presenting high-level details about the gridded text product being generated from the instruments on the GPM core satellite. But summary information will also be presented about the partner radiometer gridded product. All retrievals for the partner radiometer are done using the GPROF2014 algorithm using as input the PPS generated inter-calibrated 1C product for the radiometer.

  12. Scaling Up Renewable Energy Generation: Aligning Targets and Incentives with Grid Integration Considerations, Greening The Grid

    SciTech Connect

    Katz, Jessica; Cochran, Jaquelin

    2015-05-27

    Greening the Grid provides technical assistance to energy system planners, regulators, and grid operators to overcome challenges associated with integrating variable renewable energy into the grid. This document, part of a Greening the Grid toolkit, provides power system planners with tips to help secure and sustain investment in new renewable energy generation by aligning renewable energy policy targets and incentives with grid integration considerations.

  13. Multiblock grid generation for jet engine configurations

    NASA Technical Reports Server (NTRS)

    Stewart, Mark E. M.

    1992-01-01

    The goal was to create methods for generating grids with minimal human intervention that are applicable to a wide range of problems and compatible with existing numerical methods and with existing and proposed computers. The following topics that are related to multiblock grid generation are briefly covered in viewgraph form: finding a domain decomposition, dimensioning grids, grid smoothing, manipulating grids and decompositions, and some specializations for jet engine configurations.

  14. Smart Grid Information Clearinghouse (SGIC)

    SciTech Connect

    Rahman, Saifur

    2014-08-31

    Since the Energy Independence and Security Act of 2007 was enacted, there has been a large number of websites that discusses smart grid and relevant information, including those from government, academia, industry, private sector and regulatory. These websites collect information independently. Therefore, smart grid information was quite scattered and dispersed. The objective of this work was to develop, populate, manage and maintain the public Smart Grid Information Clearinghouse (SGIC) web portal. The information in the SGIC website is comprehensive that includes smart grid information, research & development, demonstration projects, technical standards, costs & benefit analyses, business cases, legislation, policy & regulation, and other information on lesson learned and best practices. The content in the SGIC website is logically grouped to allow easily browse, search and sort. In addition to providing the browse and search feature, the SGIC web portal also allow users to share their smart grid information with others though our online content submission platform. The Clearinghouse web portal, therefore, serves as the first stop shop for smart grid information that collects smart grid information in a non-bias, non-promotional manner and can provide a missing link from information sources to end users and better serve users’ needs. The web portal is available at www.sgiclearinghouse.org. This report summarizes the work performed during the course of the project (September 2009 – August 2014). Section 2.0 lists SGIC Advisory Committee and User Group members. Section 3.0 discusses SGIC information architecture and web-based database application functionalities. Section 4.0 summarizes SGIC features and functionalities, including its search, browse and sort capabilities, web portal social networking, online content submission platform and security measures implemented. Section 5.0 discusses SGIC web portal contents, including smart grid 101, smart grid projects

  15. Notes on Accuracy of Finite-Volume Discretization Schemes on Irregular Grids

    NASA Technical Reports Server (NTRS)

    Diskin, Boris; Thomas, James L.

    2011-01-01

    Truncation-error analysis is a reliable tool in predicting convergence rates of discretization errors on regular smooth grids. However, it is often misleading in application to finite-volume discretization schemes on irregular (e.g., unstructured) grids. Convergence of truncation errors severely degrades on general irregular grids; a design-order convergence can be achieved only on grids with a certain degree of geometric regularity. Such degradation of truncation-error convergence does not necessarily imply a lower-order convergence of discretization errors. In these notes, irregular-grid computations demonstrate that the design-order discretization-error convergence can be achieved even when truncation errors exhibit a lower-order convergence or, in some cases, do not converge at all.

  16. NLN: Celebrating Associate Degree Nursing.

    ERIC Educational Resources Information Center

    Hoddick, Nancy A.

    1981-01-01

    Introduces a project celebrating the thirtieth anniversary of associate degree nursing (ADN) education. Reviews the efforts and plans of two national associations to identify and resolve recurring ADN issues and recognize the associate degree nurse's contributions. Describes the forums and publications planned to meet these objectives. Includes…

  17. Degree, Yes--Education, No

    ERIC Educational Resources Information Center

    Sheahan, Sister Dorothy

    1974-01-01

    The external degree program, based solely on test proficiency, offers to its students not an educational opportunity; not a learning situation but a schema for securing a degree, with any kind of socialization into the profession conspicuously missing from the program. (Author/DS)

  18. Top 100 Degree Producers 2001.

    ERIC Educational Resources Information Center

    Brotherton, Phaedra; Borden, Victor M. H.

    2001-01-01

    Descriptive text and numerous tables provide information on higher education degrees awarded to minority students in 1999-2000. Data are provided on masters, doctoral, and first professional degrees for minorities in 1999-2000 by gender, state, race/ethnicity, school type, individual school, and major. Data for previous years are provided for…

  19. Employers Often Distrust Online Degrees

    ERIC Educational Resources Information Center

    Carnevale, Dan

    2007-01-01

    This article explains why employers are reluctant to accept potential employees with online degrees. The results of several surveys of those who evaluate potential employees and make hiring decisions indicate a bias against online degrees, even as more and more colleges are offering programs online. To those officials, the words "online education"…

  20. Research Degrees as Professional Education?

    ERIC Educational Resources Information Center

    Barnacle, Robyn; Dall'Alba, Gloria

    2011-01-01

    There is an increasing trend within higher education and, more specifically, in higher degrees by research, to treat a professional skills set as a desirable graduate outcome. The increasing value that is being placed on a professional skills set in large part reflects growing interest around the world in the role of research degrees in labour…

  1. Six Degrees of "Visual" Separation

    ERIC Educational Resources Information Center

    Wall, Sharon

    2006-01-01

    Whether referring to psychologist Stanley Milgram's intriguing theory, John Guare's successful play and film, or Kevin Bacon's party game, six degrees of separation may also be used as a way to help students make visual connections. The six degrees of separation is the concept that everyone is connected to everyone else in the world by only six…

  2. Colorado Electrical Transmission Grid

    DOE Data Explorer

    Zehner, Richard E.

    2012-02-01

    Citation Information: Originator: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Originator: Xcel Energy Publication Date: 2012 Title: Colorado XcelEnergy NonXcel Transmission Network Edition: First Publication Information: Publication Place: Earth Science & Observation Center, Cooperative Institute for Research in Environmental Science (CIRES), University of Colorado, Boulder Publisher: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Description: This layer contains transmission network of Colorado Spatial Domain: Extent: Top: 4540689.017558 m Left: 160606.141934 m Right: 758715.946645 m Bottom: 4098910.893397m Contact Information: Contact Organization: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Contact Person: Khalid Hussein Address: CIRES, Ekeley Building Earth Science & Observation Center (ESOC) 216 UCB City: Boulder State: CO Postal Code: 80309-0216 Country: USA Contact Telephone: 303-492-6782 Spatial Reference Information: Coordinate System: Universal Transverse Mercator (UTM) WGS’1984 Zone 13N False Easting: 500000.00000000 False Northing: 0.00000000 Central Meridian: -105.00000000 Scale Factor: 0.99960000 Latitude of Origin: 0.00000000 Linear Unit: Meter Datum: World Geodetic System ’1984 (WGS ’1984) Prime Meridian: Greenwich Angular Unit: Degree Digital Form: Format Name: Shapefile

  3. POWER GRID RELIABILITY AND SECURITY

    SciTech Connect

    Bose, Anjan; Venkatasubramanian, Vaithianathan; Hauser, Carl; Bakken, David; Anderson, David; Zhao, Chuanlin; Liu, Dong; Yang, Tao; Meng, Ming; Zhang, Lin; Ning, Jiawei; Tashman, Zaid

    2014-09-30

    This project has led to the development of a real-time simulation platform for electric power grids called Grid Simulator or GridSim for simulating the dynamic and information network interactions of large- scale power systems. The platform consists of physical models of power system components including synchronous generators, loads and control, which are simulated using a modified commercial power simulator namely Transient Stability Analysis Tool (TSAT) [1] together with data cleanup components, as well as an emulated substation level and wide-area power analysis components. The platform also includes realistic representations of communication network middleware that can emulate the real-time information flow back and forth between substations and control centers in wide-area power systems. The platform has been validated on a realistic 6000-bus model of the western American power system. The simulator GridSim developed in this project is the first of its kind in its ability to simulate real-time response of large-scale power grids, and serves as a cost effective real-time stability and control simulation platform for power industry.

  4. Grid Stiffened Structure Analysis Tool

    NASA Technical Reports Server (NTRS)

    1999-01-01

    The Grid Stiffened Analysis Tool contract is contract performed by Boeing under NASA purchase order H30249D. The contract calls for a "best effort" study comprised of two tasks: (1) Create documentation for a composite grid-stiffened structure analysis tool, in the form of a Microsoft EXCEL spread sheet, that was developed by originally at Stanford University and later further developed by the Air Force, and (2) Write a program that functions as a NASTRAN pre-processor to generate an FEM code for grid-stiffened structure. In performing this contract, Task 1 was given higher priority because it enables NASA to make efficient use of a unique tool they already have; Task 2 was proposed by Boeing because it also would be beneficial to the analysis of composite grid-stiffened structures, specifically in generating models for preliminary design studies. The contract is now complete, this package includes copies of the user's documentation for Task 1 and a CD ROM & diskette with an electronic copy of the user's documentation and an updated version of the "GRID 99" spreadsheet.

  5. The CrossGrid project

    NASA Astrophysics Data System (ADS)

    Kunze, M.; CrossGrid Collaboration

    2003-04-01

    There are many large-scale problems that require new approaches to computing, such as earth observation, environmental management, biomedicine, industrial and scientific modeling. The CrossGrid project addresses realistic problems in medicine, environmental protection, flood prediction, and physics analysis and is oriented towards specific end-users: Medical doctors, who could obtain new tools to help them to obtain correct diagnoses and to guide them during operations; industries, that could be advised on the best timing for some critical operations involving risk of pollution; flood crisis teams, that could predict the risk of a flood on the basis of historical records and actual hydrological and meteorological data; physicists, who could optimize the analysis of massive volumes of data distributed across countries and continents. Corresponding applications will be based on Grid technology and could be complex and difficult to use: the CrossGrid project aims at developing several tools that will make the Grid more friendly for average users. Portals for specific applications will be designed, that should allow for easy connection to the Grid, create a customized work environment, and provide users with all necessary information to get their job done.

  6. ASCI Grid Services summary report.

    SciTech Connect

    Hiebert-Dodd, Kathie L.

    2004-03-01

    The ASCI Grid Services (initially called Distributed Resource Management) project was started under DisCom{sup 2} when distant and distributed computing was identified as a technology critical to the success of the ASCI Program. The goals of the Grid Services project has and continues to be to provide easy, consistent access to all the ASCI hardware and software resources across the nuclear weapons complex using computational grid technologies, increase the usability of ASCI hardware and software resources by providing interfaces for resource monitoring, job submission, job monitoring, and job control, and enable the effective use of high-end computing capability through complex-wide resource scheduling and brokering. In order to increase acceptance of the new technology, the goal included providing these services in both the unclassified as well as the classified user's environment. This paper summarizes the many accomplishments and lessons learned over approximately five years of the ASCI Grid Services Project. It also provides suggestions on how to renew/restart the effort for grid services capability when the situation is right for that need.

  7. An adaptive discretization of compressible flow using a multitude of moving Cartesian grids

    NASA Astrophysics Data System (ADS)

    Qiu, Linhai; Lu, Wenlong; Fedkiw, Ronald

    2016-01-01

    We present a novel method for simulating compressible flow on a multitude of Cartesian grids that can rotate and translate. Following previous work, we split the time integration into an explicit step for advection followed by an implicit solve for the pressure. A second order accurate flux based scheme is devised to handle advection on each moving Cartesian grid using an effective characteristic velocity that accounts for the grid motion. In order to avoid the stringent time step restriction imposed by very fine grids, we propose strategies that allow for a fluid velocity CFL number larger than 1. The stringent time step restriction related to the sound speed is alleviated by formulating an implicit linear system in order to find a pressure consistent with the equation of state. This implicit linear system crosses overlapping Cartesian grid boundaries by utilizing local Voronoi meshes to connect the various degrees of freedom obtaining a symmetric positive-definite system. Since a straightforward application of this technique contains an inherent central differencing which can result in spurious oscillations, we introduce a new high order diffusion term similar in spirit to ENO-LLF but solved for implicitly in order to avoid any associated time step restrictions. The method is conservative on each grid, as well as globally conservative on the background grid that contains all other grids. Moreover, a conservative interpolation operator is devised for conservatively remapping values in order to keep them consistent across different overlapping grids. Additionally, the method is extended to handle two-way solid fluid coupling in a monolithic fashion including cases (in the appendix) where solids in close proximity do not properly allow for grid based degrees of freedom in between them.

  8. Wavelet-Based Grid Generation

    NASA Technical Reports Server (NTRS)

    Jameson, Leland

    1996-01-01

    Wavelets can provide a basis set in which the basis functions are constructed by dilating and translating a fixed function known as the mother wavelet. The mother wavelet can be seen as a high pass filter in the frequency domain. The process of dilating and expanding this high-pass filter can be seen as altering the frequency range that is 'passed' or detected. The process of translation moves this high-pass filter throughout the domain, thereby providing a mechanism to detect the frequencies or scales of information at every location. This is exactly the type of information that is needed for effective grid generation. This paper provides motivation to use wavelets for grid generation in addition to providing the final product: source code for wavelet-based grid generation.

  9. Using Grid Cells for Navigation

    PubMed Central

    Bush, Daniel; Barry, Caswell; Manson, Daniel; Burgess, Neil

    2015-01-01

    Summary Mammals are able to navigate to hidden goal locations by direct routes that may traverse previously unvisited terrain. Empirical evidence suggests that this “vector navigation” relies on an internal representation of space provided by the hippocampal formation. The periodic spatial firing patterns of grid cells in the hippocampal formation offer a compact combinatorial code for location within large-scale space. Here, we consider the computational problem of how to determine the vector between start and goal locations encoded by the firing of grid cells when this vector may be much longer than the largest grid scale. First, we present an algorithmic solution to the problem, inspired by the Fourier shift theorem. Second, we describe several potential neural network implementations of this solution that combine efficiency of search and biological plausibility. Finally, we discuss the empirical predictions of these implementations and their relationship to the anatomy and electrophysiology of the hippocampal formation. PMID:26247860

  10. Grids: The Top Ten Questions

    DOE PAGESBeta

    Schopf, Jennifer M.; Nitzberg, Bill

    2002-01-01

    The design and implementation of a national computing system and data grid has become a reachable goal from both the computer science and computational science point of view. A distributed infrastructure capable of sophisticated computational functions can bring many benefits to scientific work, but poses many challenges, both technical and socio-political. Technical challenges include having basic software tools, higher-level services, functioning and pervasive security, and standards, while socio-political issues include building a user community, adding incentives for sites to be part of a user-centric environment, and educating funding sources about the needs of this community. This paper details the areasmore » relating to Grid research that we feel still need to be addressed to fully leverage the advantages of the Grid.« less

  11. Grid-free compressive beamforming.

    PubMed

    Xenaki, Angeliki; Gerstoft, Peter

    2015-04-01

    The direction-of-arrival (DOA) estimation problem involves the localization of a few sources from a limited number of observations on an array of sensors, thus it can be formulated as a sparse signal reconstruction problem and solved efficiently with compressive sensing (CS) to achieve high-resolution imaging. On a discrete angular grid, the CS reconstruction degrades due to basis mismatch when the DOAs do not coincide with the angular directions on the grid. To overcome this limitation, a continuous formulation of the DOA problem is employed and an optimization procedure is introduced, which promotes sparsity on a continuous optimization variable. The DOA estimation problem with infinitely many unknowns, i.e., source locations and amplitudes, is solved over a few optimization variables with semidefinite programming. The grid-free CS reconstruction provides high-resolution imaging even with non-uniform arrays, single-snapshot data and under noisy conditions as demonstrated on experimental towed array data. PMID:25920844

  12. Ten Years of Grid Cells.

    PubMed

    Rowland, David C; Roudi, Yasser; Moser, May-Britt; Moser, Edvard I

    2016-07-01

    The medial entorhinal cortex (MEC) creates a neural representation of space through a set of functionally dedicated cell types: grid cells, border cells, head direction cells, and speed cells. Grid cells, the most abundant functional cell type in the MEC, have hexagonally arranged firing fields that tile the surface of the environment. These cells were discovered only in 2005, but after 10 years of investigation, we are beginning to understand how they are organized in the MEC network, how their periodic firing fields might be generated, how they are shaped by properties of the environment, and how they interact with the rest of the MEC network. The aim of this review is to summarize what we know about grid cells and point out where our knowledge is still incomplete. PMID:27023731

  13. Degree Options and Requirements in Master's Degree Programs.

    ERIC Educational Resources Information Center

    Sumner, David E.

    1998-01-01

    Presents results of a survey of 158 master's degree programs in mass communication disciplines regarding: thesis, project, and coursework-only options; course requirements; and core courses most frequently required. Compares these findings with those from earlier studies. (SR)

  14. TIGGERC: Turbomachinery Interactive Grid Generator for 2-D Grid Applications and Users Guide

    NASA Technical Reports Server (NTRS)

    Miller, David P.

    1994-01-01

    A two-dimensional multi-block grid generator has been developed for a new design and analysis system for studying multiple blade-row turbomachinery problems. TIGGERC is a mouse driven, interactive grid generation program which can be used to modify boundary coordinates and grid packing and generates surface grids using a hyperbolic tangent or algebraic distribution of grid points on the block boundaries. The interior points of each block grid are distributed using a transfinite interpolation approach. TIGGERC can generate a blocked axisymmetric H-grid, C-grid, I-grid or O-grid for studying turbomachinery flow problems. TIGGERC was developed for operation on Silicon Graphics workstations. Detailed discussion of the grid generation methodology, menu options, operational features and sample grid geometries are presented.

  15. TBGG- INTERACTIVE ALGEBRAIC GRID GENERATION

    NASA Technical Reports Server (NTRS)

    Smith, R. E.

    1994-01-01

    TBGG, Two-Boundary Grid Generation, applies an interactive algebraic grid generation technique in two dimensions. The program incorporates mathematical equations that relate the computational domain to the physical domain. TBGG has application to a variety of problems using finite difference techniques, such as computational fluid dynamics. Examples include the creation of a C-type grid about an airfoil and a nozzle configuration in which no left or right boundaries are specified. The underlying two-boundary technique of grid generation is based on Hermite cubic interpolation between two fixed, nonintersecting boundaries. The boundaries are defined by two ordered sets of points, referred to as the top and bottom. Left and right side boundaries may also be specified, and call upon linear blending functions to conform interior interpolation to the side boundaries. Spacing between physical grid coordinates is determined as a function of boundary data and uniformly spaced computational coordinates. Control functions relating computational coordinates to parametric intermediate variables that affect the distance between grid points are embedded in the interpolation formulas. A versatile control function technique with smooth cubic spline functions is also presented. The TBGG program is written in FORTRAN 77. It works best in an interactive graphics environment where computational displays and user responses are quickly exchanged. The program has been implemented on a CDC Cyber 170 series computer using NOS 2.4 operating system, with a central memory requirement of 151,700 (octal) 60 bit words. TBGG requires a Tektronix 4015 terminal and the DI-3000 Graphics Library of Precision Visuals, Inc. TBGG was developed in 1986.

  16. Center is at Latitude 30 Degrees North, Longitude 30 Degrees

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Center of the orthographic projection is at latitude 30 degrees N., longitude 30 degrees. The north polar residual ice cap, which is cut by spiral-patterned troughs, is located at the top. The central part is characterized by a dark depression, Chryse basin, where several large outflow channels terminate. The lower-left corner is marked by a vast system of canyons, Valles Marineris, which extends eastward for several thousand kilometers.

  17. Center is at Latitude 30 Degrees South., Longitude 330 Degrees

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Center of the orthographic projection is at latitude 30 degrees S., longitude 330 degrees. Heavily cratered highlands dominate this view. Toward the lower right, a conspicuous light-colored circular depression marks the ancient large Hellas impact basin. Directly northeast of Hellas, several large ancient impacts dot the landscape, including Cassini, Schiaparelli, and Huygens. Several large outflow channels are located in the upper left-hand corner. The permanent, residual south polar ice cap is located near the bottom.

  18. Center is at Latitude 30 Degrees South, Longitude 210 Degrees

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Center of the orthographic projection is at latitude 30 degrees S., longitude 210 degrees. Toward the top, the lowland plains of Elysium and Utopia Planitiae are separated from the darker heavily cratered highlands by a broad escarpment. The far bottom left is marked by the large light-colored ancient Hellas impact basin. The permanent south polar residual ice cap is located near the bottom.

  19. The Design of Grids in Web Surveys

    PubMed Central

    Couper, Mick P.; Tourangeau, Roger; Conrad, Frederick G.; Zhang, Chan

    2014-01-01

    Grid or matrix questions are associated with a number of problems in Web surveys. In this paper, we present results from two experiments testing the design of grid questions to reduce breakoffs, missing data, and satisficing. The first examines dynamic elements to help guide respondent through the grid, and on splitting a larger grid into component pieces. The second manipulates the visual complexity of the grid and on simplifying the grid. We find that using dynamic feedback to guide respondents through a multi-question grid helps reduce missing data. Splitting the grids into component questions further reduces missing data and motivated underreporting. The visual complexity of the grid appeared to have little effect on performance. PMID:25258472

  20. Convectively cooled electrical grid structure

    DOEpatents

    Paterson, J.A.; Koehler, G.W.

    1980-11-10

    Undesirable distortions of electrical grid conductors from thermal cycling are minimized and related problems such as unwanted thermionic emission and structural failure from overheating are avoided by providing for a flow of fluid coolant within each conductor. The conductors are secured at each end to separate flexible support elements which accommodate to individual longitudinal expansion and contraction of each conductor while resisting lateral displacements, the coolant flow preferably being directed into and out of each conductor through passages in the flexible support elements. The grid may have a modular or divided construction which facilitates manufacture and repairs.

  1. GENI: Grid Hardware and Software

    SciTech Connect

    2012-01-09

    GENI Project: The 15 projects in ARPA-E’s GENI program, short for “Green Electricity Network Integration,” aim to modernize the way electricity is transmitted in the U.S. through advances in hardware and software for the electric grid. These advances will improve the efficiency and reliability of electricity transmission, increase the amount of renewable energy the grid can utilize, and provide energy suppliers and consumers with greater control over their power flows in order to better manage peak power demand and cost.

  2. Convectively cooled electrical grid structure

    DOEpatents

    Paterson, James A.; Koehler, Gary W.

    1982-01-01

    Undesirable distortions of electrical grid conductors (12) from thermal cycling are minimized and related problems such as unwanted thermionic emission and structural failure from overheating are avoided by providing for a flow of fluid coolant within each conductor (12). The conductors (12) are secured at each end to separate flexible support elements (16) which accommodate to individual longitudinal expansion and contraction of each conductor (12) while resisting lateral displacements, the coolant flow preferably being directed into and out of each conductor through passages (48) in the flexible support elements (16). The grid (11) may have a modular or divided construction which facilitates manufacture and repairs.

  3. Grid for Earth Science Applications

    NASA Astrophysics Data System (ADS)

    Petitdidier, Monique; Schwichtenberg, Horst

    2013-04-01

    The civil society at large has addressed to the Earth Science community many strong requirements related in particular to natural and industrial risks, climate changes, new energies. The main critical point is that on one hand the civil society and all public ask for certainties i.e. precise values with small error range as it concerns prediction at short, medium and long term in all domains; on the other hand Science can mainly answer only in terms of probability of occurrence. To improve the answer or/and decrease the uncertainties, (1) new observational networks have been deployed in order to have a better geographical coverage and more accurate measurements have been carried out in key locations and aboard satellites. Following the OECD recommendations on the openness of research and public sector data, more and more data are available for Academic organisation and SMEs; (2) New algorithms and methodologies have been developed to face the huge data processing and assimilation into simulations using new technologies and compute resources. Finally, our total knowledge about the complex Earth system is contained in models and measurements, how we put them together has to be managed cleverly. The technical challenge is to put together databases and computing resources to answer the ES challenges. However all the applications are very intensive computing. Different compute solutions are available and depend on the characteristics of the applications. One of them is Grid especially efficient for independent or embarrassingly parallel jobs related to statistical and parametric studies. Numerous applications in atmospheric chemistry, meteorology, seismology, hydrology, pollution, climate and biodiversity have been deployed successfully on Grid. In order to fulfill requirements of risk management, several prototype applications have been deployed using OGC (Open geospatial Consortium) components with Grid middleware. The Grid has permitted via a huge number of runs to

  4. Interactive solution-adaptive grid generation

    NASA Technical Reports Server (NTRS)

    Choo, Yung K.; Henderson, Todd L.

    1992-01-01

    TURBO-AD is an interactive solution-adaptive grid generation program under development. The program combines an interactive algebraic grid generation technique and a solution-adaptive grid generation technique into a single interactive solution-adaptive grid generation package. The control point form uses a sparse collection of control points to algebraically generate a field grid. This technique provides local grid control capability and is well suited to interactive work due to its speed and efficiency. A mapping from the physical domain to a parametric domain was used to improve difficulties that had been encountered near outwardly concave boundaries in the control point technique. Therefore, all grid modifications are performed on a unit square in the parametric domain, and the new adapted grid in the parametric domain is then mapped back to the physical domain. The grid adaptation is achieved by first adapting the control points to a numerical solution in the parametric domain using control sources obtained from flow properties. Then a new modified grid is generated from the adapted control net. This solution-adaptive grid generation process is efficient because the number of control points is much less than the number of grid points and the generation of a new grid from the adapted control net is an efficient algebraic process. TURBO-AD provides the user with both local and global grid controls.

  5. Grid Collector: Facilitating Efficient Selective Access from DataGrids

    SciTech Connect

    Wu, Kesheng; Gu, Junmin; Lauret, Jerome; Poskanzer, Arthur M.; Shoshani, Arie; Sim, Alexander; Zhang, Wei-Ming

    2005-05-17

    The Grid Collector is a system that facilitates the effective analysis and spontaneous exploration of scientific data. It combines an efficient indexing technology with a Grid file management technology to speed up common analysis jobs on high-energy physics data and to enable some previously impractical analysis jobs. To analyze a set of high-energy collision events, one typically specifies the files containing the events of interest, reads all the events in the files, and filters out unwanted ones. Since most analysis jobs filter out significant number of events, a considerable amount of time is wasted by reading the unwanted events. The Grid Collector removes this inefficiency by allowing users to specify more precisely what events are of interest and to read only the selected events. This speeds up most analysis jobs. In existing analysis frameworks, the responsibility of bringing files from tertiary storages or remote sites to local disks falls on the users. This forces most of analysis jobs to be performed at centralized computer facilities where commonly used files are kept on large shared file systems. The Grid Collector automates file management tasks and eliminates the labor-intensive manual file transfers. This makes it much easier to perform analyses that require data files on tertiary storages and remote sites. It also makes more computer resources available for analysis jobs since they are no longer bound to the centralized facilities.

  6. IGB grid: User's manual (A turbomachinery grid generation code)

    NASA Technical Reports Server (NTRS)

    Beach, T. A.; Hoffman, G.

    1992-01-01

    A grid generation code called IGB is presented for use in computational investigations of turbomachinery flowfields. It contains a combination of algebraic and elliptic techniques coded for use on an interactive graphics workstation. The instructions for use and a test case are included.

  7. 360-degree physician performance assessment.

    PubMed

    Dubinsky, Isser; Jennings, Kelly; Greengarten, Moshe; Brans, Amy

    2010-01-01

    Few jurisdictions have a robust common approach to assessing the quantitative and qualitative dimensions of physician performance. In this article, we examine the need for 360-degree physician performance assessment and review the literature supporting comprehensive physician assessment. An evidence-based, "best practice" approach to the development of a 360-degree physician performance assessment framework is presented, including an overview of a tool kit to support implementation. The focus of the framework is to support physician career planning and to enhance the quality of patient care. Finally, the legal considerations related to implementing 360-degree physician performance assessment are explored. PMID:20357549

  8. Killing Horizons Kill Horizon Degrees

    NASA Astrophysics Data System (ADS)

    Bergamin, L.; Grumiller, D.

    Frequently, it is argued that the microstates responsible for the Bekenstein-Hawking entropy should arise from some physical degrees of freedom located near or on the black hole horizon. In this essay, we elucidate that instead entropy may emerge from the conversion of physical degrees of freedom, attached to a generic boundary, into unobservable gauge degrees of freedom attached to the horizon. By constructing the reduced phase space, it can be demonstrated that such a transmutation indeed takes place for a large class of black holes, including Schwarzschild.

  9. caGrid 1.0: a Grid enterprise architecture for cancer research.

    PubMed

    Oster, Scott; Langella, Stephen; Hastings, Shannon; Ervin, David; Madduri, Ravi; Kurc, Tahsin; Siebenlist, Frank; Covitz, Peter; Shanbhag, Krishnakant; Foster, Ian; Saltz, Joel

    2007-01-01

    caGrid is the core Grid architecture of the NCI-sponsored cancer Biomedical Informatics Grid (caBIG) program. The current release, caGrid version 1.0, is developed as the production Grid software infrastructure of caBIG. Based on feedback from adopters of the previous version (caGrid 0.5), it has been significantly enhanced with new features and improvements to existing components. This paper presents an overview of caGrid 1.0, its main components, and enhancements over caGrid 0.5. PMID:18693901

  10. Design and Implementation of a Multi-Grid Resource Broker for Grid Computing

    NASA Astrophysics Data System (ADS)

    Yang, Chao-Tung; Hu, Wen-Jen

    Grid computing integrates geographical computing resources across multiple virtual organizations to achieve high performance computing. A single grid often could not provide huge resources, because virtual organizations have no adequate of computing resources restriction on the scale of organizations. In this paper, we present a multi-grid, new grid architecture for integrating multiple computational grids from different virtual organizations. A resource broker is built on multiple grid environments; it integrates a number of single grids from different virtual organizations without the limitation of organizations. The multiple grid resource could be utilized efficiently and precisely.

  11. Tuned grid generation with ICEM CFD

    NASA Technical Reports Server (NTRS)

    Wulf, Armin; Akdag, Vedat

    1995-01-01

    ICEM CFD is a CAD based grid generation package that supports multiblock structured, unstructured tetrahedral and unstructured hexahedral grids. Major development efforts have been spent to extend ICEM CFD's multiblock structured and hexahedral unstructured grid generation capabilities. The modules added are: a parametric grid generation module and a semi-automatic hexahedral grid generation module. A fully automatic version of the hexahedral grid generation module for around a set of predefined objects in rectilinear enclosures has been developed. These modules will be presented and the procedures used will be described, and examples will be discussed.

  12. A Method for Flow Simulation About Complex Geometries Using Both Structured and Unstructured Grids

    NASA Technical Reports Server (NTRS)

    Debonis, James R.

    1994-01-01

    A computational fluid dynamics code which utilizes both structured and unstructured grids was developed. The objective of this study was to develop and demonstrate the ability of such a code to achieve solutions about complex geometries in two dimensions. An unstructured grid generator and flow solver were incorporated into the PARC2D structured flow solver. This new unstructured grid generator capability allows for easier generation and manipulation of complex grids. Several examples of the grid generation capabilities are provided. The coupling of different grid topologies and the manipulation of individual grids is shown. Also, grids for realistic geometries, a NACA 0012 airfoil and a wing/nacelle installation, were created. The flow over a NACA 0012 airfoil was used as a test case for the flow solver. Eight separate cases were run. They were both the inviscid and viscous solutions for two freestream Mach numbers and airfoil angle of attacks of 0 to 3.86 degrees. The Mach numbers chosen were for a subsonic case, Mach 0.6, and a case where supersonic regions and a shock wave exists, Mach 0.8. These test case conditions were selected to match experimentally obtained data for code comparison. The results show that the code accurately predicts the flow field for all cases.

  13. Grid-coordinate generation program

    USGS Publications Warehouse

    Cosner, Oliver J.; Horwich, Esther

    1974-01-01

    This program description of the grid-coordinate generation program is written for computer users who are familiar with digital aquifer models. The program computes the coordinates for a variable grid -used in the 'Pinder Model' (a finite-difference aquifer simulator), for input to the CalComp GPCP (general purpose contouring program). The program adjusts the y-value by a user-supplied constant in order to transpose the origin of the model grid from the upper left-hand corner to the lower left-hand corner of the grid. The user has the options of, (1.) choosing the boundaries of the plot; (2.) adjusting the z-values (altitudes) by a constant; (3.) deleting superfluous z-values and (4.) subtracting the simulated surfaces from each other to obtain the decline. Output of this program includes the fixed format CNTL data cards and the other data cards required for input to GPCP. The output from GPCP then is used to produce a potentiometric map or a decline map by means of the CalComp plotter.

  14. Grid Logging: Best Practices Guide

    SciTech Connect

    Tierney, Brian L; Tierney, Brian L; Gunter, Dan

    2008-04-01

    The purpose of this document is to help developers of Grid middleware and application software generate log files that will be useful to Grid administrators, users, developers and Grid middleware itself. Currently, most of the currently generated log files are only useful to the author of the program. Good logging practices are instrumental to performance analysis, problem diagnosis, and security auditing tasks such as incident tracing and damage assessment. This document does not discuss the issue of a logging API. It is assumed that a standard log API such as syslog (C), log4j (Java), or logger (Python) is being used. Other custom logging API or even printf could be used. The key point is that the logs must contain the required information in the required format. At a high level of abstraction, the best practices for Grid logging are: (1) Consistently structured, typed, log events; (2) A standard high-resolution timestamp; (3) Use of logging levels and categories to separate logs by detail and purpose; (4) Consistent use of global and local identifiers; and (5) Use of some regular, newline-delimited ASCII text format. The rest of this document describes each of these recommendations in detail.

  15. Network mechanisms of grid cells.

    PubMed

    Moser, Edvard I; Moser, May-Britt; Roudi, Yasser

    2014-02-01

    One of the major breakthroughs in neuroscience is the emerging understanding of how signals from the external environment are extracted and represented in the primary sensory cortices of the mammalian brain. The operational principles of the rest of the cortex, however, have essentially remained in the dark. The discovery of grid cells, and their functional organization, opens the door to some of the first insights into the workings of the association cortices, at a stage of neural processing where firing properties are shaped not primarily by the nature of incoming sensory signals but rather by internal self-organizing principles. Grid cells are place-modulated neurons whose firing locations define a periodic triangular array overlaid on the entire space available to a moving animal. The unclouded firing pattern of these cells is rare within the association cortices. In this paper, we shall review recent advances in our understanding of the mechanisms of grid-cell formation which suggest that the pattern originates by competitive network interactions, and we shall relate these ideas to new insights regarding the organization of grid cells into functionally segregated modules. PMID:24366126

  16. Smart Grid Communications System Blueprint

    NASA Astrophysics Data System (ADS)

    Clark, Adrian; Pavlovski, Chris

    2010-10-01

    Telecommunications operators are well versed in deploying 2G and 3G wireless networks. These networks presently support the mobile business user and/or retail consumer wishing to place conventional voice calls and data connections. The electrical power industry has recently commenced transformation of its distribution networks by deploying smart monitoring and control devices throughout their networks. This evolution of the network into a `smart grid' has also motivated the need to deploy wireless technologies that bridge the communication gap between the smart devices and information technology systems. The requirements of these networks differ from traditional wireless networks that communications operators have deployed, which have thus far forced energy companies to consider deploying their own wireless networks. We present our experience in deploying wireless networks to support the smart grid and highlight the key properties of these networks. These characteristics include application awareness, support for large numbers of simultaneous cell connections, high service coverage and prioritized routing of data. We also outline our target blueprint architecture that may be useful to the industry in building wireless and fixed networks to support the smart grid. By observing our experiences, telecommunications operators and equipment manufacturers will be able to augment their current networks and products in a way that accommodates the needs of the emerging industry of smart grids and intelligent electrical networks.

  17. FermiGrid - experience and future plans

    SciTech Connect

    Chadwick, K.; Berman, E.; Canal, P.; Hesselroth, T.; Garzoglio, G.; Levshina, T.; Sergeev, V.; Sfiligoi, I.; Timm, S.; Yocum, D.; /Fermilab

    2007-09-01

    Fermilab supports a scientific program that includes experiments and scientists located across the globe. In order to better serve this community, Fermilab has placed its production computer resources in a Campus Grid infrastructure called 'FermiGrid'. The FermiGrid infrastructure allows the large experiments at Fermilab to have priority access to their own resources, enables sharing of these resources in an opportunistic fashion, and movement of work (jobs, data) between the Campus Grid and National Grids such as Open Science Grid and the WLCG. FermiGrid resources support multiple Virtual Organizations (VOs), including VOs from the Open Science Grid (OSG), EGEE and the Worldwide LHC Computing Grid Collaboration (WLCG). Fermilab also makes leading contributions to the Open Science Grid in the areas of accounting, batch computing, grid security, job management, resource selection, site infrastructure, storage management, and VO services. Through the FermiGrid interfaces, authenticated and authorized VOs and individuals may access our core grid services, the 10,000+ Fermilab resident CPUs, near-petabyte (including CMS) online disk pools and the multi-petabyte Fermilab Mass Storage System. These core grid services include a site wide Globus gatekeeper, VO management services for several VOs, Fermilab site authorization services, grid user mapping services, as well as job accounting and monitoring, resource selection and data movement services. Access to these services is via standard and well-supported grid interfaces. We will report on the user experience of using the FermiGrid campus infrastructure interfaced to a national cyberinfrastructure--the successes and the problems.

  18. The architecture of a virtual grid GIS server

    NASA Astrophysics Data System (ADS)

    Wu, Pengfei; Fang, Yu; Chen, Bin; Wu, Xi; Tian, Xiaoting

    2008-10-01

    The grid computing technology provides the service oriented architecture for distributed applications. The virtual Grid GIS server is the distributed and interoperable enterprise application GIS architecture running in the grid environment, which integrates heterogeneous GIS platforms. All sorts of legacy GIS platforms join the grid as members of GIS virtual organization. Based on Microkernel we design the ESB and portal GIS service layer, which compose Microkernel GIS. Through web portals, portal GIS services and mediation of service bus, following the principle of SoC, we separate business logic from implementing logic. Microkernel GIS greatly reduces the coupling degree between applications and GIS platforms. The enterprise applications are independent of certain GIS platforms, and making the application developers to pay attention to the business logic. Via configuration and orchestration of a set of fine-grained services, the system creates GIS Business, which acts as a whole WebGIS request when activated. In this way, the system satisfies a business workflow directly and simply, with little or no new code.

  19. Grid-scale fluctuations and forecast error in wind power

    NASA Astrophysics Data System (ADS)

    Bel, G.; Connaughton, C. P.; Toots, M.; Bandi, M. M.

    2016-02-01

    Wind power fluctuations at the turbine and farm scales are generally not expected to be correlated over large distances. When power from distributed farms feeds the electrical grid, fluctuations from various farms are expected to smooth out. Using data from the Irish grid as a representative example, we analyze wind power fluctuations entering an electrical grid. We find that not only are grid-scale fluctuations temporally correlated up to a day, but they possess a self-similar structure—a signature of long-range correlations in atmospheric turbulence affecting wind power. Using the statistical structure of temporal correlations in fluctuations for generated and forecast power time series, we quantify two types of forecast error: a timescale error ({e}τ ) that quantifies deviations between the high frequency components of the forecast and generated time series, and a scaling error ({e}\\zeta ) that quantifies the degree to which the models fail to predict temporal correlations in the fluctuations for generated power. With no a priori knowledge of the forecast models, we suggest a simple memory kernel that reduces both the timescale error ({e}τ ) and the scaling error ({e}\\zeta ).

  20. Power grid disturbances and polar cap index during geomagnetic storms

    NASA Astrophysics Data System (ADS)

    Stauning, Peter

    2013-06-01

    The strong geomagnetic storm in the evening of 30 October 2003 caused high-voltage power grid disturbances in Sweden that expanded to produce hour-long power line outage in Malmö located in the southern part of the country. This was not a unique situation. The geomagnetic storm on 13 March 1989 caused extensive disruptions of high-voltage power circuits especially in the Province of Quebec, Canada, but also to a lesser degree in Scandinavia. Similar events have occurred earlier, among others, during the great storms of 13-14 July 1982 and 8-9 February 1986. These high-voltage power grid disturbances were related to impulsive magnetic variations accompanying extraordinarily intense substorm events. The events were preceded by lengthy intervals of unusually high values of the Polar Cap (PC) index caused by enhanced transpolar ionospheric convection. The transpolar convection transports magnetic flux from the dayside to nightside which causes equatorward displacements of the region of auroral activity enabling the substorms to hit vital power grids. During the 30 October 2003 event the intense solar proton radiation disabled the ACE satellite observations widely used to provide forecast of magnetic storm events. Hence in this case the alarmingly high PC index could provide useful warning of the storm as a back-up of the missing ACE-based forecast. In further cases, monitoring the PC index level could provide supplementary storm warnings to the benefit of power grid operators.

  1. Grid computing in image analysis

    PubMed Central

    2011-01-01

    Diagnostic surgical pathology or tissue–based diagnosis still remains the most reliable and specific diagnostic medical procedure. The development of whole slide scanners permits the creation of virtual slides and to work on so-called virtual microscopes. In addition to interactive work on virtual slides approaches have been reported that introduce automated virtual microscopy, which is composed of several tools focusing on quite different tasks. These include evaluation of image quality and image standardization, analysis of potential useful thresholds for object detection and identification (segmentation), dynamic segmentation procedures, adjustable magnification to optimize feature extraction, and texture analysis including image transformation and evaluation of elementary primitives. Grid technology seems to possess all features to efficiently target and control the specific tasks of image information and detection in order to obtain a detailed and accurate diagnosis. Grid technology is based upon so-called nodes that are linked together and share certain communication rules in using open standards. Their number and functionality can vary according to the needs of a specific user at a given point in time. When implementing automated virtual microscopy with Grid technology, all of the five different Grid functions have to be taken into account, namely 1) computation services, 2) data services, 3) application services, 4) information services, and 5) knowledge services. Although all mandatory tools of automated virtual microscopy can be implemented in a closed or standardized open system, Grid technology offers a new dimension to acquire, detect, classify, and distribute medical image information, and to assure quality in tissue–based diagnosis. PMID:21516880

  2. Ultra-high degree spectral modelling of Earth and planetary topography

    NASA Astrophysics Data System (ADS)

    Rexer, Moritz; Hirt, Christian

    2016-04-01

    New methods for ultra-high degree spherical harmonic analyses and syntheses have been developed and studied over the past years. The focus group "High-resolution Gravity Modelling", established in 2013 at TU Munich, has implemented ultra-high degree spectral modelling techniques and used successfully to transform high-resolution topography grids of Earth, Moon and Mars into spherical harmonics. For Earth, a new set of 1 arc-min topography models, developed by our group and released under the name Earth2014, was expanded into a spherical harmonic series to degree 10,800. For the 15 arc-sec resolution SRTM15_plus topography and bathymetry, a spectral resolution of degree 43,200 was achieved. For Moon and Mars, topography grids from laser altimetry were harmonically analysed up to degree ~46,000. The spectral representations of the topography grids presented in this contribution are required in the context of spectral gravity forward modelling with ultra-high degree, where the topographic potential is computed as a function of the spherical harmonic series of the topography and its integer powers. References: Hirt, C., and M. Rexer (2015) Earth2014: 1 arc-min shape, topography, bedrock and ice-sheet models - available as gridded data and degree-10,800 spherical harmonics, International Journal of Applied Earth Observation and Geoinformation 39, 103-112, doi:10.1016/j.jag.2015.03.001. Rexer, M. and C. Hirt (2015), Ultra-high degree surface spherical harmonic analysis using the Gauss-Legendre and the Driscoll/Healy quadrature theorem and application to planetary topography models of Earth, Moon and Mars. Surveys in Geophysics 36(6), 803-830, doi: 10.1007/s10712-015-9345-z.

  3. Spaceflight Operations Services Grid (SOSG)

    NASA Technical Reports Server (NTRS)

    Bradford, Robert N.; Thigpen, William W.

    2004-01-01

    In an effort to adapt existing space flight operations services to new emerging Grid technologies we are developing a Grid-based prototype space flight operations Grid. This prototype is based on the operational services being provided to the International Space Station's Payload operations located at the Marshall Space Flight Center, Alabama. The prototype services will be Grid or Web enabled and provided to four user communities through portal technology. Users will have the opportunity to assess the value and feasibility of Grid technologies to their specific areas or disciplines. In this presentation descriptions of the prototype development, User-based services, Grid-based services and status of the project will be presented. Expected benefits, findings and observations (if any) to date will also be discussed. The focus of the presentation will be on the project in general, status to date and future plans. The End-use services to be included in the prototype are voice, video, telemetry, commanding, collaboration tools and visualization among others. Security is addressed throughout the project and is being designed into the Grid technologies and standards development. The project is divided into three phases. Phase One establishes the baseline User-based services required for space flight operations listed above. Phase Two involves applying Gridlweb technologies to the User-based services and development of portals for access by users. Phase Three will allow NASA and end users to evaluate the services and determine the future of the technology as applied to space flight operational services. Although, Phase One, which includes the development of the quasi-operational User-based services of the prototype, development will be completed by March 2004, the application of Grid technologies to these services will have just begun. We will provide status of the Grid technologies to the individual User-based services. This effort will result in an extensible

  4. Spaceflight Operations Services Grid (SOSG)

    NASA Technical Reports Server (NTRS)

    Bradford, Robert N.; Thigpen, William W.

    2004-01-01

    In an effort to adapt existing space flight operations services to new emerging Grid technologies we are developing a Grid-based prototype space flight operations Grid. This prototype is based on the operational services being provided to the International Space Station's Payload operations located at the Marshall Space Flight Center, Alabama. The prototype services will be Grid or Web enabled and provided to four user communities through portal technology. Users will have the opportunity to assess the value and feasibility of Grid technologies to their specific areas or disciplines. In this presentation descriptions of the prototype development, User-based services, Grid-based services and status of the project will be presented. Expected benefits, findings and observations (if any) to date will also be discussed. The focus of the presentation will be on the project in general, status to date and future plans. The End-use services to be included in the prototype are voice, video, telemetry, commanding, collaboration tools and visualization among others. Security is addressed throughout the project and is being designed into the Grid technologies and standards development. The project is divided into three phases. Phase One establishes the baseline User-based services required for space flight operations listed above. Phase Two involves applying Gridlweb technologies to the User-based services and development of portals for access by users. Phase Three will allow NASA and end users to evaluate the services and determine the future of the technology as applied to space flight operational services. Although, Phase One, which includes the development of the quasi-operational User-based services of the prototype, development will be completed by March 2004, the application of Grid technologies to these services will have just begun. We will provide status of the Grid technologies to the individual User-based services. This effort will result in an extensible

  5. On degree-degree correlations in multilayer networks

    NASA Astrophysics Data System (ADS)

    de Arruda, Guilherme Ferraz; Cozzo, Emanuele; Moreno, Yamir; Rodrigues, Francisco A.

    2016-06-01

    We propose a generalization of the concept of assortativity based on the tensorial representation of multilayer networks, covering the definitions given in terms of Pearson and Spearman coefficients. Our approach can also be applied to weighted networks and provides information about correlations considering pairs of layers. By analyzing the multilayer representation of the airport transportation network, we show that contrasting results are obtained when the layers are analyzed independently or as an interconnected system. Finally, we study the impact of the level of assortativity and heterogeneity between layers on the spreading of diseases. Our results highlight the need of studying degree-degree correlations on multilayer systems, instead of on aggregated networks.

  6. Robustness of networks of networks with degree-degree correlation

    NASA Astrophysics Data System (ADS)

    Min, Byungjoon; Canals, Santiago; Makse, Hernan

    Many real-world complex systems ranging from critical infrastructure and transportation networks to living systems including brain and cellular networks are not formed by an isolated network but by a network of networks. Randomly coupled networks with interdependency between different networks may easily result in abrupt collapse. Here, we seek a possible explanation of stable functioning in natural networks of networks including functional brain networks. Specifically, we analyze the robustness of networks of networks focused on one-to-many interconnections between different networks and degree-degree correlation. Implication of the network robustness on functional brain networks of rats is also discussed.

  7. Center is at Latitude 30 Degrees South, Longitude 90 Degrees

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Center of the orthographic projection is at latitude 30 degrees S., longitude 90 degrees. The top half is dominated by the Tharsis Montes volcanoes, the large Alba Patera shield volcano, the dark Chryse basin, and a vast canyon system, Valles Marineris. In the central part, a prominent physiographic feature, Thaumasia plateau, includes a complex array of small- and large-scale faults and ridges and ancient volcanoes. The large conspicuous Argyre basin, southeast of the Thaumasia plateau, contains a broad expanse of light-colored plains 800 km across. The permanent south polar ice cap is located near the bottom.

  8. Center is at Latitude 30 Degrees North, Longitude 150 Degrees

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Center of the orthographic projection is at latitude 30 degrees N., longitude 150 degrees. The north polar residual ice cap, which is cut by spiral-patterned troughs and surrounded by the dark lowland plains of Vastitas Borealis, is located at the top. The right-central part is dominated by the Tharsis Montes volcanoes. The most prominent of the Tharsis Montes volcanoes is the largest known volcano in the solar system, Olympus Mons. The light-colored lowland plains of Amazonis, Elysium, and Arcadia Planitiae lies north and west of Olympus Mons. The heavily cratered highlands dominate the lower one-third.

  9. Airplane Mesh Development with Grid Density Studies

    NASA Technical Reports Server (NTRS)

    Cliff, Susan E.; Baker, Timothy J.; Thomas, Scott D.; Lawrence, Scott L.; Rimlinger, Mark J.

    1999-01-01

    Automatic Grid Generation Wish List Geometry handling, including CAD clean up and mesh generation, remains a major bottleneck in the application of CFD methods. There is a pressing need for greater automation in several aspects of the geometry preparation in order to reduce set up time and eliminate user intervention as much as possible. Starting from the CAD representation of a configuration, there may be holes or overlapping surfaces which require an intensive effort to establish cleanly abutting surface patches, and collections of many patches may need to be combined for more efficient use of the geometrical representation. Obtaining an accurate and suitable body conforming grid with an adequate distribution of points throughout the flow-field, for the flow conditions of interest, is often the most time consuming task for complex CFD applications. There is a need for a clean unambiguous definition of the CAD geometry. Ideally this would be carried out automatically by smart CAD clean up software. One could also define a standard piece-wise smooth surface representation suitable for use by computational methods and then create software to translate between the various CAD descriptions and the standard representation. Surface meshing remains a time consuming, user intensive procedure. There is a need for automated surface meshing, requiring only minimal user intervention to define the overall density of mesh points. The surface mesher should produce well shaped elements (triangles or quadrilaterals) whose size is determined initially according to the surface curvature with a minimum size for flat pieces, and later refined by the user in other regions if necessary. Present techniques for volume meshing all require some degree of user intervention. There is a need for fully automated and reliable volume mesh generation. In addition, it should be possible to create both surface and volume meshes that meet guaranteed measures of mesh quality (e.g. minimum and maximum

  10. Optimizing Grid Patterns on Photovoltaic Cells

    NASA Technical Reports Server (NTRS)

    Burger, D. R.

    1984-01-01

    CELCAL computer program helps in optimizing grid patterns for different photovoltaic cell geometries and metalization processes. Five different powerloss phenomena associated with front-surface metal grid pattern on photovoltaic cells.

  11. Additional Security Considerations for Grid Management

    NASA Technical Reports Server (NTRS)

    Eidson, Thomas M.

    2003-01-01

    The use of Grid computing environments is growing in popularity. A Grid computing environment is primarily a wide area network that encompasses multiple local area networks, where some of the local area networks are managed by different organizations. A Grid computing environment also includes common interfaces for distributed computing software so that the heterogeneous set of machines that make up the Grid can be used more easily. The other key feature of a Grid is that the distributed computing software includes appropriate security technology. The focus of most Grid software is on the security involved with application execution, file transfers, and other remote computing procedures. However, there are other important security issues related to the management of a Grid and the users who use that Grid. This note discusses these additional security issues and makes several suggestions as how they can be managed.

  12. Evaluation of Grid Modification Methods for On- and Off-Track Sonic Boom Analysis

    NASA Technical Reports Server (NTRS)

    Nayani, Sudheer N.; Campbell, Richard L.

    2013-01-01

    Grid modification methods have been under development at NASA to enable better predictions of low boom pressure signatures from supersonic aircraft. As part of this effort, two new codes, Stretched and Sheared Grid - Modified (SSG) and Boom Grid (BG), have been developed in the past year. The CFD results from these codes have been compared with ones from the earlier grid modification codes Stretched and Sheared Grid (SSGRID) and Mach Cone Aligned Prism (MCAP) and also with the available experimental results. NASA's unstructured grid suite of software TetrUSS and the automatic sourcing code AUTOSRC were used for base grid generation and flow solutions. The BG method has been evaluated on three wind tunnel models. Pressure signatures have been obtained up to two body lengths below a Gulfstream aircraft wind tunnel model. Good agreement with the wind tunnel results have been obtained for both on-track and off-track (up to 53 degrees) cases. On-track pressure signatures up to ten body lengths below a Straight Line Segmented Leading Edge (SLSLE) wind tunnel model have been extracted. Good agreement with the wind tunnel results have been obtained. Pressure signatures have been obtained at 1.5 body lengths below a Lockheed Martin aircraft wind tunnel model. Good agreement with the wind tunnel results have been obtained for both on-track and off-track (up to 40 degrees) cases. Grid sensitivity studies have been carried out to investigate any grid size related issues. Methods have been evaluated for fully turbulent, mixed laminar/turbulent and fully laminar flow conditions.

  13. Power grid complex network evolutions for the smart grid

    NASA Astrophysics Data System (ADS)

    Pagani, Giuliano Andrea; Aiello, Marco

    2014-02-01

    The shift towards an energy grid dominated by prosumers (consumers and producers of energy) will inevitably have repercussions on the electricity distribution infrastructure. Today the grid is a hierarchical one delivering energy from large scale facilities to end-users. Tomorrow it will be a capillary infrastructure at the medium and low voltage levels that will support local energy trading among prosumers. We investigate how different network topologies and growth models facilitate a more efficient and reliable network, and how they can facilitate the emergence of a decentralized electricity market. We show how connectivity plays an important role in improving the properties of reliability and path-cost reduction. Our results indicate that a specific type of evolution balances best the ratio between increased connectivity and costs to achieve the network growth.

  14. Smart Grid Status and Metrics Report

    SciTech Connect

    Balducci, Patrick J.; Weimar, Mark R.; Kirkham, Harold

    2014-07-01

    To convey progress made in achieving the vision of a smart grid, this report uses a set of six characteristics derived from the National Energy Technology Laboratory Modern Grid Strategy. It measures 21 metrics to provide insight into the grid’s capacity to embody these characteristics. This report looks across a spectrum of smart grid concerns to measure the status of smart grid deployment and impacts.

  15. The fundamentals of adaptive grid movement

    NASA Technical Reports Server (NTRS)

    Eiseman, Peter R.

    1990-01-01

    Basic grid point movement schemes are studied. The schemes are referred to as adaptive grids. Weight functions and equidistribution in one dimension are treated. The specification of coefficients in the linear weight, attraction to a given grid or a curve, and evolutionary forces are considered. Curve by curve and finite volume methods are described. The temporal coupling of partial differential equations solvers and grid generators was discussed.

  16. The National Grid Project: A system overview

    NASA Technical Reports Server (NTRS)

    Gaither, Adam; Gaither, Kelly; Jean, Brian; Remotigue, Michael; Whitmire, John; Soni, Bharat; Thompson, Joe; Dannenhoffer,, John; Weatherill, Nigel

    1995-01-01

    The National Grid Project (NGP) is a comprehensive numerical grid generation software system that is being developed at the National Science Foundation (NSF) Engineering Research Center (ERC) for Computational Field Simulation (CFS) at Mississippi State University (MSU). NGP is supported by a coalition of U.S. industries and federal laboratories. The objective of the NGP is to significantly decrease the amount of time it takes to generate a numerical grid for complex geometries and to increase the quality of these grids to enable computational field simulations for applications in industry. A geometric configuration can be discretized into grids (or meshes) that have two fundamental forms: structured and unstructured. Structured grids are formed by intersecting curvilinear coordinate lines and are composed of quadrilateral (2D) and hexahedral (3D) logically rectangular cells. The connectivity of a structured grid provides for trivial identification of neighboring points by incrementing coordinate indices. Unstructured grids are composed of cells of any shape (commonly triangles, quadrilaterals, tetrahedra and hexahedra), but do not have trivial identification of neighbors by incrementing an index. For unstructured grids, a set of points and an associated connectivity table is generated to define unstructured cell shapes and neighboring points. Hybrid grids are a combination of structured grids and unstructured grids. Chimera (overset) grids are intersecting or overlapping structured grids. The NGP system currently provides a user interface that integrates both 2D and 3D structured and unstructured grid generation, a solid modeling topology data management system, an internal Computer Aided Design (CAD) system based on Non-Uniform Rational B-Splines (NURBS), a journaling language, and a grid/solution visualization system.

  17. Best Practices In Overset Grid Generation

    NASA Technical Reports Server (NTRS)

    Chan, William M.; Gomez, Reynaldo J., III; Rogers, Stuart E.; Buning, Pieter G.; Kwak, Dochan (Technical Monitor)

    2002-01-01

    Grid generation for overset grids on complex geometry can be divided into four main steps: geometry processing, surface grid generation, volume grid generation and domain connectivity. For each of these steps, the procedures currently practiced by experienced users are described. Typical problems encountered are also highlighted and discussed. Most of the guidelines are derived from experience on a variety of problems including space launch and return vehicles, subsonic transports with propulsion and high lift devices, supersonic vehicles, rotorcraft vehicles, and turbomachinery.

  18. Visual analytics for power grid contingency analysis.

    PubMed

    Pak Chung Wong; Zhenyu Huang; Yousu Chen; Mackey, Patrick; Shuangshuang Jin

    2014-01-01

    Contingency analysis employs different measures to model scenarios, analyze them, and then derive the best response to any threats. A proposed visual-analytics pipeline for power grid management can transform approximately 100 million contingency scenarios to a manageable size and form. Grid operators can examine individual scenarios and devise preventive or mitigation strategies in a timely manner. Power grid engineers have applied the pipeline to a Western Electricity Coordinating Council power grid model. PMID:24808167

  19. Generating Three-Dimensional Grids About Anything

    NASA Technical Reports Server (NTRS)

    Sorenson, Reese L.

    1991-01-01

    Three-Dimensional Grids About Anything by Poisson's Equation (3DGRAPE) computer program designed to make computational grids in or about almost any shape. Generated by solution of Poisson's differential equations in three dimensions. Program automatically finds its own values for inhomogeneous terms giving near-orthogonality and controlled grid-cell height at boundaries. Grids generated applied to both viscous and inviscid aerodynamic problems, and to problems in other areas of fluid dynamics. Written in 100 percent FORTRAN 77.

  20. The State of NASA's Information Power Grid

    NASA Technical Reports Server (NTRS)

    Johnston, William E.; Vaziri, Arsi; Tanner, Leigh Ann; Feiereisen, William J.; Thigpen, William; Biegel, Bryan (Technical Monitor)

    2001-01-01

    This viewgraph presentation transfers the concept of the power grid to information sharing in the NASA community. An information grid of this sort would be characterized as comprising tools, middleware, and services for the facilitation of interoperability, distribution of new technologies, human collaboration, and data management. While a grid would increase the ability of information sharing, it would not necessitate it. The onus of utilizing the grid would rest with the users.

  1. Image Enhancement with Polymer Grid Triode Arrays

    NASA Astrophysics Data System (ADS)

    Heeger, Alan J.; Heeger, David J.; Langan, John; Yang, Yang

    1995-12-01

    An array of polymer grid triodes connected by a common grid functions as a "plastic retina," providing local contrast gain control for image enhancement. This simple device, made from layers of conducting polymers, functions as an active resistive network that performs center-surround filtering. The polymer grid triode array with common grid is a continuous analog of the discrete approach of Mead, with a variety of fabrication advantages and significant savings in area within the unit cell of each pixel.

  2. Top 100 Degree Producers 2003. Part II: Graduate Degrees.

    ERIC Educational Resources Information Center

    Anyaso, Hilary Hurd, Ed.

    2003-01-01

    Articles in this theme issue discuss the current status of graduate education in the United States, exploring whether there is or is not a crisis and discussing economic factors that affect participation in graduate study. Featured is the annual list of the top 100 producers of graduate degrees for black students. (SLD)

  3. ITIL and Grid services at GridKa

    NASA Astrophysics Data System (ADS)

    Marten, H.; Koenig, T.

    2010-04-01

    The Steinbuch Centre for Computing (SCC) is a new organizational unit of the Karlsruhe Institute of Technology (KIT). Founded in February 2008 as a merger of the previous Institute for Scientific Computing of Forschungszentrum Karlsruhe and the Computing Centre of the Technical University Karlsruhe, SCC provides a broad spectrum of IT services for 8.000 employees and 18.000 students and carries out research and development in key areas of information technology under the same roof. SCC is also known to host the German WLCG [1] Tier-1 centre GridKa. In order to accompany the merging of the two existing computing centres located at a distance of about 10 km and to provide common first class services for science, SCC has selected the IT service management according to the industrial quasi-standard "IT Infrastructure Library (ITIL)" [3] as a strategic element. The paper discusses the implementation of a few ITIL key components from the perspective of a Scientific Computing Centre using examples of Grid services at GridKa.

  4. 21 CFR 886.1330 - Amsler grid.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Amsler grid. 886.1330 Section 886.1330 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1330 Amsler grid. (a) Identification. An Amsler grid is a...

  5. Stable boundary conditions for Cartesian grid calculations

    NASA Technical Reports Server (NTRS)

    Berger, M. J.; Leveque, R. J.

    1990-01-01

    The inviscid Euler equations in complicated geometries are solved using a Cartesian grid. This requires solid wall boundary conditions in the irregular grid cells near the boundary. Since these cells may be orders of magnitude smaller than the regular grid cells, stability is a primary concern. An approach to this problem is presented and its use is illustrated.

  6. 76 FR 46279 - Smart Grid Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-02

    ... National Institute of Standards and Technology Smart Grid Advisory Committee AGENCY: Department of Commerce, National Institute of Standards and Technology ACTION: Notice of open meeting. SUMMARY: The Smart Grid... should be sent to Office of the National Coordinator for Smart Grid Interoperability, National...

  7. 77 FR 38768 - Smart Grid Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-29

    ... National Institute of Standards and Technology Smart Grid Advisory Committee AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of open meeting. SUMMARY: The Smart Grid... the Smart Grid Interoperability Panel transition plan, review the status of the research...

  8. Multiprocessor computer overset grid method and apparatus

    DOEpatents

    Barnette, Daniel W.; Ober, Curtis C.

    2003-01-01

    A multiprocessor computer overset grid method and apparatus comprises associating points in each overset grid with processors and using mapped interpolation transformations to communicate intermediate values between processors assigned base and target points of the interpolation transformations. The method allows a multiprocessor computer to operate with effective load balance on overset grid applications.

  9. MonALISA-based Grid monitoring and control

    NASA Astrophysics Data System (ADS)

    Grigoras, C.; Voicu, R.; Tapus, N.; Legrand, I.; Carminati, F.; Betev, L.

    2011-01-01

    High-Energy Physics experiments like ALICE at LHC require petabytes of storage and thousand of CPU working in parallel to store, reconstruct and analyze the collected data. This computing power is provided by aggregating the resources of hundreds of institutes and research centers and in addition several purpose-built large computing centers. All these resources are transparently available to the users under the umbrella of ALICE Grid. To ensure smooth operation of this complex distributed machinery we have developed a set of tools to monitor and control the various services, based on the MonALISA monitoring framework. By integrating monitoring information in the system we have achieved a high degree of automation and have significantly reduced the burden on the Grid managers. In this article we present how we collect the monitoring information and a few of the tools that make use of it.

  10. Survey on Existing Science Gateways - Based on DEGREE

    NASA Astrophysics Data System (ADS)

    Schwichtenberg, Horst; Claus, Steffen

    2010-05-01

    Science Gateways gather community-developed specific tools, applications, and data that is usually combined and presented in a graphical user interface which is customized to the needs of the target user community. Science Gateways serve as a single point of entry for the users and are usually represented by fat clients or web portals. Part of the DEGREE project (Dissemination and Exploitation of Grids in Earth Science) was a state-of-the-art survey of portal usage in Earth Science (ES) applications. This survey considered a list of 29 portals, including 17 ES portals and 12 generic developments coming from outside of the ES domain. The survey identified three common usage types of ES portals, including data dissemination (e.g. observational data), collaboration as well as usage of Grid-based resources (e.g. for processing of ES datasets). Based on these three usage types, key requirements could be extracted. These requirements were furthermore used for a feature comparison with existing portal developments coming from outside of the ES domain. This presentation gives an overview of the results of the survey (including a feature comparison of ES and non-ES portals). Furthermore, three portals are discussed in detail, one for each usage type (data dissemination, collaboration, Grid-based).

  11. Spline for blade grids design

    NASA Astrophysics Data System (ADS)

    Korshunov, Andrei; Shershnev, Vladimir; Korshunova, Ksenia

    2015-08-01

    Methods of designing blades grids of power machines, such as equal thickness shape built on middle-line arc, or methods based on target stress spreading were invented long time ago, well described and still in use. Science and technology has moved far from that time and laboriousness of experimental research, which were involving unique equipment, requires development of new robust and flexible methods of design, which will determine the optimal geometry of flow passage.This investigation provides simple and universal method of designing blades, which, in comparison to the currently used methods, requires significantly less input data but still provides accurate results. The described method is purely analytical for both concave and convex sides of the blade, and therefore lets to describe the curve behavior down the flow path at any point. Compared with the blade grid designs currently used in industry, geometric parameters of the designs constructed with this method show the maximum deviation below 0.4%.

  12. Vehicle to Grid Demonstration Project

    SciTech Connect

    Willett Kempton; Meryl Gardner; Michael Hidrue; Fouad Kamilev; Sachin Kamboj; Jon Lilley; Rodney McGee; George Parsons; Nat Pearre; Keith Trnka

    2010-12-31

    This report summarizes the activities and accomplishments of a two-year DOE-funded project on Grid-Integrated Vehicles (GIV) with vehicle to grid power (V2G). The project included several research and development components: an analysis of US driving patterns; an analysis of the market for EVs and V2G-capable EVs; development and testing of GIV components (in-car and in-EVSE); interconnect law and policy; and development and filing of patents. In addition, development activities included GIV manufacturing and licensing of technologies developed under this grant. Also, five vehicles were built and deployed, four for the fleet of the State of Delaware, plus one for the University of Delaware fleet.

  13. The CMS integration grid testbed

    SciTech Connect

    Graham, Gregory E.

    2004-08-26

    The CMS Integration Grid Testbed (IGT) comprises USCMS Tier-1 and Tier-2 hardware at the following sites: the California Institute of Technology, Fermi National Accelerator Laboratory, the University of California at San Diego, and the University of Florida at Gainesville. The IGT runs jobs using the Globus Toolkit with a DAGMan and Condor-G front end. The virtual organization (VO) is managed using VO management scripts from the European Data Grid (EDG). Gridwide monitoring is accomplished using local tools such as Ganglia interfaced into the Globus Metadata Directory Service (MDS) and the agent based Mona Lisa. Domain specific software is packaged and installed using the Distribution After Release (DAR) tool of CMS, while middleware under the auspices of the Virtual Data Toolkit (VDT) is distributed using Pacman. During a continuous two month span in Fall of 2002, over 1 million official CMS GEANT based Monte Carlo events were generated and returned to CERN for analysis while being demonstrated at SC2002. In this paper, we describe the process that led to one of the world's first continuously available, functioning grids.

  14. Telemedical applications and grid technology

    NASA Astrophysics Data System (ADS)

    Graschew, Georgi; Roelofs, Theo A.; Rakowsky, Stefan; Schlag, Peter M.; Kaiser, Silvan; Albayrak, Sahin

    2005-11-01

    Due to the experience in the exploitation of previous European telemedicine projects an open Euro-Mediterranean consortium proposes the Virtual Euro-Mediterranean Hospital (VEMH) initiative. The provision of the same advanced technologies to the European and Mediterranean Countries should contribute to their better dialogue for integration. VEMH aims to facilitate the interconnection of various services through real integration which must take into account the social, human and cultural dimensions. VEMH will provide a platform consisting of a satellite and terrestrial link for the application of medical e-learning, real-time telemedicine and medical assistance. The methodologies for the VEMH are medical-needs-driven instead of technology-driven. They supply new management tools for virtual medical communities and allow management of clinical outcomes for implementation of evidence-based medicine. Due to the distributed character of the VEMH Grid technology becomes inevitable for successful deployment of the services. Existing Grid Engines provide basic computing power needed by today's medical analysis tasks but lack other capabilities needed for communication and knowledge sharing services envisioned. When it comes to heterogeneous systems to be shared by different institutions especially the high level system management areas are still unsupported. Therefore a Metagrid Engine is needed that provides a superset of functionalities across different Grid Engines and manages strong privacy and Quality of Service constraints at this comprehensive level.

  15. Certainty grids for mobile robots

    NASA Technical Reports Server (NTRS)

    Moravec, H. P.

    1987-01-01

    A numerical representation of uncertain and incomplete sensor knowledge called Certainty Grids has been used successfully in several mobile robot control programs, and has proven itself to be a powerful and efficient unifying solution for sensor fusion, motion planning, landmark identification, and many other central problems. Researchers propose to build a software framework running on processors onboard the new Uranus mobile robot that will maintain a probabilistic, geometric map of the robot's surroundings as it moves. The certainty grid representation will allow this map to be incrementally updated in a uniform way from various sources including sonar, stereo vision, proximity and contact sensors. The approach can correctly model the fuzziness of each reading, while at the same time combining multiple measurements to produce sharper map features, and it can deal correctly with uncertainties in the robot's motion. The map will be used by planning programs to choose clear paths, identify locations (by correlating maps), identify well-known and insufficiently sensed terrain, and perhaps identify objects by shape. The certainty grid representation can be extended in the same dimension and used to detect and track moving objects.

  16. Smart Grid Interoperability Maturity Model

    SciTech Connect

    Widergren, Steven E.; Levinson, Alex; Mater, J.; Drummond, R.

    2010-04-28

    The integration of automation associated with electricity resources (including transmission and distribution automation and demand-side resources operated by end-users) is key to supporting greater efficiencies and incorporating variable renewable resources and electric vehicles into the power system. The integration problems faced by this community are analogous to those faced in the health industry, emergency services, and other complex communities with many stakeholders. To highlight this issue and encourage communication and the development of a smart grid interoperability community, the GridWise Architecture Council (GWAC) created an Interoperability Context-Setting Framework. This "conceptual model" has been helpful to explain the importance of organizational alignment in addition to technical and informational interface specifications for "smart grid" devices and systems. As a next step to building a community sensitive to interoperability, the GWAC is investigating an interoperability maturity model (IMM) based on work done by others to address similar circumstances. The objective is to create a tool or set of tools that encourages a culture of interoperability in this emerging community. The tools would measure status and progress, analyze gaps, and prioritize efforts to improve the situation.

  17. Life after a Humanities Degree

    ERIC Educational Resources Information Center

    Masola, Athambile

    2016-01-01

    This article explores the experiences of a humanities graduate after leaving the academy. The author considers her own education in light of the historical changes in South Africa's education system. The article is a personal account of the questions and challenges encountered in choosing a humanities degree in a context where a tertiary education…

  18. The Top STEM Degree Producers

    ERIC Educational Resources Information Center

    Diverse: Issues in Higher Education, 2012

    2012-01-01

    This article presents a list of the top Science, Technology, Engineering, and Mathematics (STEM) degree producers in the U.S. This list is broken down into seven categories: (1) Total Minority Research/Scholarship and Other Doctoral: Mathematics and Statistics; (2) Total Minority Bachelors: Biological and Biomedical Sciences; (3) Total Minority…

  19. The Top Theological Degree Producers

    ERIC Educational Resources Information Center

    Diverse: Issues in Higher Education, 2012

    2012-01-01

    Each year, "Diverse: Issues in Higher Education" publishes a list of the Top 100 producers of associate, bachelor's and graduate degrees awarded to minority students based on research conducted by Dr. Victor M. H. Borden, professor of educational leadership and policy studies at Indiana University Bloomington. This year, for the first time, it has…

  20. Degrees of Success in Accounting.

    ERIC Educational Resources Information Center

    Bourner, Jill; Bourner, Tom

    1985-01-01

    Analysis of degree awards in Great Britain shows considerable inconsistency across disciplines and poor results in the accounting field. The implications for the labor market and accounting employment prospects are examined, and a reexamination of the application of equivalent standards across subjects is recommended. (MSE)

  1. Building the International Lattice Data Grid

    SciTech Connect

    Mark G. Beckett, Paul Coddington, Bálint Joó, Chris M. Maynard, Dirk Pleiter, Osamu Tatebe, Tomoteru Yoshie

    2011-06-01

    We present the International Lattice Data Grid (ILDG), a loosely federated grid-of-grids for sharing data from Lattice Quantum Chromodynamics (LQCD) simulations. The ILDG comprises of metadata, file-format and web-service standards, which can be used to wrap regional data-grid interfaces, allowing seamless access to catalogues and data in a diverse set of collaborating regional grids. We discuss the technological underpinnings of the ILDG, primarily the metadata and the middleware, and offer a critique of its various aspects with the hindsight of the design work and the two years of production.

  2. A 3-D chimera grid embedding technique

    NASA Technical Reports Server (NTRS)

    Benek, J. A.; Buning, P. G.; Steger, J. L.

    1985-01-01

    A three-dimensional (3-D) chimera grid-embedding technique is described. The technique simplifies the construction of computational grids about complex geometries. The method subdivides the physical domain into regions which can accommodate easily generated grids. Communication among the grids is accomplished by interpolation of the dependent variables at grid boundaries. The procedures for constructing the composite mesh and the associated data structures are described. The method is demonstrated by solution of the Euler equations for the transonic flow about a wing/body, wing/body/tail, and a configuration of three ellipsoidal bodies.

  3. Spacer grid assembly and locking mechanism

    DOEpatents

    Snyder, Jr., Harold J.; Veca, Anthony R.; Donck, Harry A.

    1982-01-01

    A spacer grid assembly is disclosed for retaining a plurality of fuel rods in substantially parallel spaced relation, the spacer grids being formed with rhombic openings defining contact means for engaging from one to four fuel rods arranged in each opening, the spacer grids being of symmetric configuration with their rhombic openings being asymmetrically offset to permit inversion and relative rotation of the similar spacer grids for improved support of the fuel rods. An improved locking mechanism includes tie bars having chordal surfaces to facilitate their installation in slotted circular openings of the spacer grids, the tie rods being rotatable into locking engagement with the slotted openings.

  4. Grid generation for 3D turbomachinery configurations

    NASA Technical Reports Server (NTRS)

    Shih, Ming-Hsin; Soni, Bharat K.

    1992-01-01

    A numerical grid generation algorithm associated with the flow field about turbomachinery geometries is presented. Graphical user interface is developed with the FORMS Library to create an interactive, user-friendly working environment. This customized algorithm reduces the man-hours required to generate a grid associated with turbomachinery geometry, as compared to those required by general-purpose grid generation softwares. Bezier curves are utilized both interactively and automatically to accomplish grid line smoothness and orthogonality. Graphical user interactions are provided in the algorithm and allow the user to design and manipulate the grid lines with a mouse.

  5. A random growth model for power grids and other spatially embedded infrastructure networks

    NASA Astrophysics Data System (ADS)

    Schultz, Paul; Heitzig, Jobst; Kurths, Jürgen

    2014-09-01

    We propose a model to create synthetic networks that may also serve as a narrative of a certain kind of infrastructure network evolution. It consists of an initialization phase with the network extending tree-like for minimum cost and a growth phase with an attachment rule giving a trade-off between cost-optimization and redundancy. Furthermore, we implement the feature of some lines being split during the grid's evolution. We show that the resulting degree distribution has an exponential tail and may show a maximum at degree two, suitable to observations of real-world power grid networks. In particular, the mean degree and the slope of the exponential decay can be controlled in partial independence. To verify to which extent the degree distribution is described by our analytic form, we conduct statistical tests, showing that the hypothesis of an exponential tail is well-accepted for our model data.

  6. A random growth model for power grids and other spatially embedded infrastructure networks

    NASA Astrophysics Data System (ADS)

    Schultz, Paul; Heitzig, Jobst; Kurths, Jürgen

    2014-10-01

    We propose a model to create synthetic networks that may also serve as a narrative of a certain kind of infrastructure network evolution. It consists of an initialization phase with the network extending tree-like for minimum cost and a growth phase with an attachment rule giving a trade-off between cost-optimization and redundancy. Furthermore, we implement the feature of some lines being split during the grid's evolution. We show that the resulting degree distribution has an exponential tail and may show a maximum at degree two, suitable to observations of real-world power grid networks. In particular, the mean degree and the slope of the exponential decay can be controlled in partial independence. To verify to which extent the degree distribution is described by our analytic form, we conduct statistical tests, showing that the hypothesis of an exponential tail is well-accepted for our model data.

  7. Center is at Latitude 30 Degrees North, Longitude 270 Degrees

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Center of the orthographic projection is at latitude 30 degrees N., longitude 270 degrees. The north polar residual ice cap of the Planum Boreum region, which is cut by spiral-patterned troughs, is located at top. The upper part is marked by a large depression, Isidis basin, which contains light-colored plains. The upper part also includes the light-colored smooth plains of Elysium Planitia and dark plains of Vastitas Borealis. Together, these form a vast expanse of contiguous plains. Toward the bottom, on the other hand, the southern hemisphere is almost entirely made up of heavily cratered highlands. At bottom left, a conspicuous, relatively bright circular depression marks the ancient large Hellas impact basin.

  8. Interactive solution-adaptive grid generation procedure

    NASA Technical Reports Server (NTRS)

    Henderson, Todd L.; Choo, Yung K.; Lee, Ki D.

    1992-01-01

    TURBO-AD is an interactive solution adaptive grid generation program under development. The program combines an interactive algebraic grid generation technique and a solution adaptive grid generation technique into a single interactive package. The control point form uses a sparse collection of control points to algebraically generate a field grid. This technique provides local grid control capability and is well suited to interactive work due to its speed and efficiency. A mapping from the physical domain to a parametric domain was used to improve difficulties encountered near outwardly concave boundaries in the control point technique. Therefore, all grid modifications are performed on the unit square in the parametric domain, and the new adapted grid is then mapped back to the physical domain. The grid adaption is achieved by adapting the control points to a numerical solution in the parametric domain using control sources obtained from the flow properties. Then a new modified grid is generated from the adapted control net. This process is efficient because the number of control points is much less than the number of grid points and the generation of the grid is an efficient algebraic process. TURBO-AD provides the user with both local and global controls.

  9. GridMol: a grid application for molecular modeling and visualization.

    PubMed

    Sun, Yanhua; Shen, Bin; Lu, Zhonghua; Jin, Zhong; Chi, Xuebin

    2008-02-01

    In this paper we present GridMol, an extensible tool for building a high performance computational chemistry platform in the grid environment. GridMol provides computational chemists one-stop service for molecular modeling, scientific computing and molecular information visualization. GridMol is not only a visualization and modeling tool but also simplifies control of remote Grid software that can access high performance computing resources. GridMol has been successfully integrated into China National Grid, the most powerful Chinese Grid Computing platform. In Section "Grid computing" of this paper, a computing example is given to show the availability and efficiency of GridMol. GridMol is coded using Java and Java3D for portability and cross-platform compatibility (Windows, Linux, MacOS X and UNIX). GridMol can run not only as a stand-alone application, but also as an applet through web browsers. In this paper, we will present the techniques for molecular visualization, molecular modeling and grid computing. GridMol is available free of charge under the GNU Public License (GPL) from our website: http://www.sccas.cn/~syh/GridMol/index.html. PMID:18231861

  10. Grid artifact reduction for direct digital radiography detectors based on rotated stationary grids with homomorphic filtering

    SciTech Connect

    Kim, Dong Sik; Lee, Sanggyun

    2013-06-15

    Purpose: Grid artifacts are caused when using the antiscatter grid in obtaining digital x-ray images. In this paper, research on grid artifact reduction techniques is conducted especially for the direct detectors, which are based on amorphous selenium. Methods: In order to analyze and reduce the grid artifacts, the authors consider a multiplicative grid image model and propose a homomorphic filtering technique. For minimal damage due to filters, which are used to suppress the grid artifacts, rotated grids with respect to the sampling direction are employed, and min-max optimization problems for searching optimal grid frequencies and angles for given sampling frequencies are established. The authors then propose algorithms for the grid artifact reduction based on the band-stop filters as well as low-pass filters. Results: The proposed algorithms are experimentally tested for digital x-ray images, which are obtained from direct detectors with the rotated grids, and are compared with other algorithms. It is shown that the proposed algorithms can successfully reduce the grid artifacts for direct detectors. Conclusions: By employing the homomorphic filtering technique, the authors can considerably suppress the strong grid artifacts with relatively narrow-bandwidth filters compared to the normal filtering case. Using rotated grids also significantly reduces the ringing artifact. Furthermore, for specific grid frequencies and angles, the authors can use simple homomorphic low-pass filters in the spatial domain, and thus alleviate the grid artifacts with very low implementation complexity.

  11. Solving Partial Differential Equations on Overlapping Grids

    SciTech Connect

    Henshaw, W D

    2008-09-22

    We discuss the solution of partial differential equations (PDEs) on overlapping grids. This is a powerful technique for efficiently solving problems in complex, possibly moving, geometry. An overlapping grid consists of a set of structured grids that overlap and cover the computational domain. By allowing the grids to overlap, grids for complex geometries can be more easily constructed. The overlapping grid approach can also be used to remove coordinate singularities by, for example, covering a sphere with two or more patches. We describe the application of the overlapping grid approach to a variety of different problems. These include the solution of incompressible fluid flows with moving and deforming geometry, the solution of high-speed compressible reactive flow with rigid bodies using adaptive mesh refinement (AMR), and the solution of the time-domain Maxwell's equations of electromagnetism.

  12. Curvilinear grids for sinuous river channels

    NASA Technical Reports Server (NTRS)

    Tatom, F. B.; Waldrop, W. R.; Smith, S. R.

    1980-01-01

    In order to effectively analyze the flow in sinuous river channels, a curvilinear grid system was developed for use in the appropriate hydrodynamic code. The CENTERLINE program was designed to generate a two dimensional grid for this purpose. The Cartesian coordinates of a series of points along the boundaries of the sinuous channel represent the primary input to CENTERLINE. The program calculates the location of the river centerline, the distance downstream along the centerline, and both radius of curvature and channel width as a function of such distance downstream. These parameters form the basis for the generation of the curvilinear grid. Based on input values for longitudinal and lateral grid spacing, the corresponding grid system is generated and a file is created containing the appropriate parameters for use in the associated explicit finite difference hydrodynamic programs. Because of the option for a nonuniform grid, grid spacing can be concentrated in areas containing the largest flow gradients.

  13. Getting a Grip on Grid Generation

    NASA Technical Reports Server (NTRS)

    2002-01-01

    GridPro is an automatic, object-oriented, multi-block grid generator that provides ease of use, high quality, rapid production, and parametric design. When paired with a 3-D graphic user interface called az- Manager, GridPro presents users with an extremely efficient, interactive capability to build topology, edit surfaces, set computational fluid dynamics (CFD) boundary conditions, and view multi-block grids. The origins of the GridPro technology date back to a 1989 SBIR contract with NASA's Glenn Research Center, in which Glenn was seeking a multi-block grid generation program that would run automatically upon identifying a pattern of grid blocks supplied by a user. The technology is currently used in many engineering fields, including aerospace, turbo- machinery, automotive, and chemical industries.

  14. Generating Composite Overlapping Grids on CAD Geometries

    SciTech Connect

    Henshaw, W.D.

    2002-02-07

    We describe some algorithms and tools that have been developed to generate composite overlapping grids on geometries that have been defined with computer aided design (CAD) programs. This process consists of five main steps. Starting from a description of the surfaces defining the computational domain we (1) correct errors in the CAD representation, (2) determine topology of the patched-surface, (3) build a global triangulation of the surface, (4) construct structured surface and volume grids using hyperbolic grid generation, and (5) generate the overlapping grid by determining the holes and the interpolation points. The overlapping grid generator which is used for the final step also supports the rapid generation of grids for block-structured adaptive mesh refinement and for moving grids. These algorithms have been implemented as part of the Overture object-oriented framework.

  15. A priori mesh quality metrics for three-dimensional hybrid grids

    SciTech Connect

    Kallinderis, Y. Fotia, S.

    2015-01-01

    Use of general hybrid grids to attain complex-geometry field simulations poses a challenge on estimation of their quality. Apart from the typical problems of non-uniformity and non-orthogonality, the change in element topology is an extra issue to address. The present work derives and evaluates an a priori mesh quality indicator for structured, unstructured, as well as hybrid grids consisting of hexahedra, prisms, tetrahedra, and pyramids. Emphasis is placed on deriving a direct relation between the quality measure and mesh distortion. The work is based on use of the Finite Volume discretization for evaluation of first order spatial derivatives. The analytic form of the truncation error is derived and applied to elementary types of mesh distortion including typical hybrid grid interfaces. The corresponding analytic expressions provide relations between the truncation error and the degree of stretching, skewness, shearing, torsion, expansion, as well as the type of grid interface.

  16. An investigation of the RCS (radar cross section) computation of grid cavities

    SciTech Connect

    Sabihi, Ahmad

    2014-12-10

    In this paper, the aperture of a cavity is covered by a metallic grid net. This metallic grid is to reduce RCS deduced by impinging radar ray on the aperture. A radar ray incident on a grid net installed on a cavity may create six types of propagation. 1-Incident rays entering inside the cavity and backscattered from it.2-Incidebnt rays on the grid net and created reection rays as an array of scatterers. These rays may create a wave with phase difference of 180 degree with respect to the exiting rays from the cavity.3-Incident rays on the grid net create surface currents owing on the net and make travelling waves, which regenerate the magnetic and electric fields. These fields make again propagated waves against incident ones.4-Creeping waves.5-Diffracted rays due to leading edges of net’s elements.6-Mutual impedance among elements of the net could be effective on the resultant RCS. Therefore, the author compares the effects of three out of six properties to a cavity without grid net. This comparison shows that RCS prediction of cavity having a grid net is much more reduced than that of without one.

  17. Globally Gridded Satellite (GridSat) Observations for Climate Studies

    NASA Technical Reports Server (NTRS)

    Knapp, Kenneth R.; Ansari, Steve; Bain, Caroline L.; Bourassa, Mark A.; Dickinson, Michael J.; Funk, Chris; Helms, Chip N.; Hennon, Christopher C.; Holmes, Christopher D.; Huffman, George J.; Kossin, James P.; Lee, Hai-Tien; Loew, Alexander; Magnusdottir, Gudrun

    2012-01-01

    Geostationary satellites have provided routine, high temporal resolution Earth observations since the 1970s. Despite the long period of record, use of these data in climate studies has been limited for numerous reasons, among them: there is no central archive of geostationary data for all international satellites, full temporal and spatial resolution data are voluminous, and diverse calibration and navigation formats encumber the uniform processing needed for multi-satellite climate studies. The International Satellite Cloud Climatology Project set the stage for overcoming these issues by archiving a subset of the full resolution geostationary data at approx.10 km resolution at 3 hourly intervals since 1983. Recent efforts at NOAA s National Climatic Data Center to provide convenient access to these data include remapping the data to a standard map projection, recalibrating the data to optimize temporal homogeneity, extending the record of observations back to 1980, and reformatting the data for broad public distribution. The Gridded Satellite (GridSat) dataset includes observations from the visible, infrared window, and infrared water vapor channels. Data are stored in the netCDF format using standards that permit a wide variety of tools and libraries to quickly and easily process the data. A novel data layering approach, together with appropriate satellite and file metadata, allows users to access GridSat data at varying levels of complexity based on their needs. The result is a climate data record already in use by the meteorological community. Examples include reanalysis of tropical cyclones, studies of global precipitation, and detection and tracking of the intertropical convergence zone.

  18. An updated global grid point surface air temperature anomaly data set: 1851--1990

    SciTech Connect

    Sepanski, R.J.; Boden, T.A.; Daniels, R.C.

    1991-10-01

    This document presents land-based monthly surface air temperature anomalies (departures from a 1951--1970 reference period mean) on a 5{degree} latitude by 10{degree} longitude global grid. Monthly surface air temperature anomalies (departures from a 1957--1975 reference period mean) for the Antarctic (grid points from 65{degree}S to 85{degree}S) are presented in a similar way as a separate data set. The data were derived primarily from the World Weather Records and the archives of the United Kingdom Meteorological Office. This long-term record of temperature anomalies may be used in studies addressing possible greenhouse-gas-induced climate changes. To date, the data have been employed in generating regional, hemispheric, and global time series for determining whether recent (i.e., post-1900) warming trends have taken place. This document also presents the monthly mean temperature records for the individual stations that were used to generate the set of gridded anomalies. The periods of record vary by station. Northern Hemisphere station data have been corrected for inhomogeneities, while Southern Hemisphere data are presented in uncorrected form. 14 refs., 11 figs., 10 tabs.

  19. Improvement to the International Bathymetric Chart of the Arctic Ocean (IBCAO): Updating the Data Base and the Grid Model

    NASA Astrophysics Data System (ADS)

    Jakobsson, M.

    2001-12-01

    has been produced as well, with a resolution of 1' x 1' for compatibility with the global grid of bathymetry that is now under construction by a working group operating under the auspices of the General Bathymetric Chart of the Oceans (GEBCO). New products include a suite of bathymetric contours derived from the grid at depths ranging from 20 metres to 5000 metres, and poster-sized Postscript maps showing isobaths printed over a shaded relief background. These latest developments reflect a commitment to maintain IBCAO as a `live' product for the foreseeable future, with periodic upgrades to improve its quality and usefulness. >http://www.ngdc.noaa.gov/mgg/bathymetry/arctic/arctic.html

  20. Six degree of freedom sensor

    DOEpatents

    Vann, Charles S.

    1999-01-01

    This small, non-contact optical sensor increases the capability and flexibility of computer controlled machines by detecting its relative position to a workpiece in all six degrees of freedom (DOF). At a fraction of the cost, it is over 200 times faster and up to 25 times more accurate than competing 3-DOF sensors. Applications range from flexible manufacturing to a 6-DOF mouse for computers. Until now, highly agile and accurate machines have been limited by their inability to adjust to changes in their tasks. By enabling them to sense all six degrees of position, these machines can now adapt to new and complicated tasks without human intervention or delay--simplifying production, reducing costs, and enhancing the value and capability of flexible manufacturing.

  1. Six degree of freedom sensor

    DOEpatents

    Vann, C.S.

    1999-03-16

    This small, non-contact optical sensor increases the capability and flexibility of computer controlled machines by detecting its relative position to a workpiece in all six degrees of freedom (DOF). At a fraction of the cost, it is over 200 times faster and up to 25 times more accurate than competing 3-DOF sensors. Applications range from flexible manufacturing to a 6-DOF mouse for computers. Until now, highly agile and accurate machines have been limited by their inability to adjust to changes in their tasks. By enabling them to sense all six degrees of position, these machines can now adapt to new and complicated tasks without human intervention or delay--simplifying production, reducing costs, and enhancing the value and capability of flexible manufacturing. 3 figs.

  2. New Associate Degree Requirements. The Advisor.

    ERIC Educational Resources Information Center

    British Columbia Council on Admissions and Transfer, Vancouver.

    This document contains a brief history of the development of the associate degree in British Columbia and reviews the degrees presently conferred. A major portion of the document focuses on newly approved (May 30, 2000) requirements for the Associate Degree of Arts (AA) and the Associate Degree of Science (AS). The associate degree formally became…

  3. Degree Attainment. Snapshot™ Report, Winter 2015

    ERIC Educational Resources Information Center

    National Student Clearinghouse, 2015

    2015-01-01

    This Snapshot Report presents information on student degree attainment in science and engineering disciplines for 2004 and 2014. It offers data on the following: (1) Science and Engineering Degrees as Percentage of All Degrees; (2) Gender Distribution of Science and Engineering Degrees by Level; (3) Gender Distribution of Bachelor's Degrees in…

  4. Survey of Volumetric Grid Generators

    NASA Technical Reports Server (NTRS)

    Woo, Alex; Volakis, John; Hulbert, Greg; Case, Jeff; Presley, Leroy L. (Technical Monitor)

    1994-01-01

    This document is the result of an Internet Survey of Volumetric grid generators. As such we have included information from only the responses which were sent to us. After the initial publication and posting of this survey, we would encourage authors and users of grid generators to send further information. Here is the initial query posted to SIGGRID@nas and the USENET group sci.physics.computational.fluid-dynamics. Date: Sun, 30 Jan 94 11:37:52 -0800 From: woo (Alex Woo x6010 227-6 rm 315) Subject: Info Sought for Survey of Grid Generators I am collecting information and reviews of both government sponsored and commercial mesh generators for large scientific calculations, both block structured and unstructured. If you send me a review of a mesh generator, please indicate its availability and cost. If you are a commercial concern with information on a product, please also include references for possible reviewers. Please email to woo@ra-next.arc.nasa.gov. I will post a summary and probably write a short note for the IEEE Antennas and Propagation Magazine. Alex Woo, MS 227-6 woo@ames.arc.nasa.gov NASA Ames Research Center NASAMAIL ACWOO Moffett Field, CA 94035-1000 SPANET 24582::W00 (415) 604-6010 (FAX) 604-4357 fhplabs,decwrl,uunet)!ames!woo Disclaimer: These are not official statements of NASA or EMCC. We did not include all the submitted text here. Instead we have created a database entry in the freely available and widely used BIBTeX format which has an Uniform Resource Locator (URL) field pointing to more details. The BIBTeX database is modeled after those available from the BIBNET project at University of Utah.

  5. A Detailed Examination of the GPM Core Satellite Gridded Text Product

    NASA Astrophysics Data System (ADS)

    Stocker, Erich Franz; Kelley, Owen; Huffman, George; Kummerow, Christian

    2015-04-01

    The Precipitation Processing System (PPS) is producing a gridded text product based on the L2 swath instantaneous precipitation retrievals from instruments aboard the Global Precipitation Measurement (GPM) mission. PPS produces instantaneous precipitation retrievals from the GPM Microwave Imager (GMI), the dual-frequency radar (DPR), and a combination of the two instruments (GMI/DPR). These swath-level retrievals are placed into separate HDF5 file for each orbit, which contain many additional parameters other than surface precipitation retrievals. Because there are so many additional parameters they are organized into related groups within the HDF5 file. This format can be intimidating to many users who are interested only in surface precipitation. They want just the appropriate parameters and they want them put into a file in a simple and easily accessible format. For this reason, scientists and PPS have collaborated to develop a gridded text product that summarizes a full day of instantaneous retrievals at the swath level by gridding the pixels of the swath products into a .25 degree x .25 degree hourly grid. All 24 hourly grids are packaged into a daily ASCII file. Data in the file is written in text lines terminated by the newline character. These products read through each the orbital files from the GPROF GMI retrieval, the DPR Ku/and dual-frequency retrieval, and the combined GMI/DPR retrieval and then grid the pixel by hour and packages them into a daily file. This paper provides the details of the core-satellite gridded product and of some tools for working with the files. It describes the calculations that were used in the gridding procedure. It provides examples of data lines. In addition, it provides examples of how the display and subsetting tool for this product can be used online and on the desktop [?? Is the browser-based online display tool that I'm working on supposed to run on the desktop too? I haven't thought about how to make it run under

  6. Insightful Workflow For Grid Computing

    SciTech Connect

    Dr. Charles Earl

    2008-10-09

    We developed a workflow adaptation and scheduling system for Grid workflow. The system currently interfaces with and uses the Karajan workflow system. We developed machine learning agents that provide the planner/scheduler with information needed to make decisions about when and how to replan. The Kubrick restructures workflow at runtime, making it unique among workflow scheduling systems. The existing Kubrick system provides a platform on which to integrate additional quality of service constraints and in which to explore the use of an ensemble of scheduling and planning algorithms. This will be the principle thrust of our Phase II work.

  7. Bootstrapping to a Semantic Grid

    SciTech Connect

    Schwidder, Jens; Talbott, Tara; Myers, James D.

    2005-02-28

    The Scientific Annotation Middleware (SAM) is a set of components and services that enable researchers, applications, problem solving environments (PSE) and software agents to create metadata and annotations about data objects and document the semantic relationships between them. Developed starting in 2001, SAM allows applications to encode metadata within files or to manage metadata at the level of individual relationships as desired. SAM then provides mechanisms to expose metadata and relation¬ships encoded either way as WebDAV properties. In this paper, we report on work to further map this metadata into RDF and discuss the role of middleware such as SAM in bridging between traditional and semantic grid applications.

  8. MSSA of globally gridded AAM

    NASA Astrophysics Data System (ADS)

    Zotov, Leonid; Schindelegger, Michael; Bizouard, Christian

    2016-04-01

    Multichannel singular spectrum analysis (MSSA) was applied to 111 years of Atmospheric Angular Momentum (AAM) grid data from ECMWMF 20th Century Reanalysis (ERA-20C) model. Components of zonal atmospheric circulation influencing Length of Day (LOD) were separated. Some of them are related to El Nino Southern Oscillation (ENSO) global circulation modes, others represent possible trends. Meridional AAM components were processed by complex MSSA. Annual, semiannual components were separated. The maps of influence in the Chandler and annual bands on Polar Motion (PM) were obtained. The regions where the torques come from, influence of friction in the mountains was also analyzed.

  9. Unstructured grid research and use at NASA Lewis Research Center

    NASA Technical Reports Server (NTRS)

    Potapczuk, Mark G.

    1993-01-01

    Computational fluid dynamics applications of grid research at LRC include inlets, nozzles, and ducts; turbomachinery; propellers - ducted and unducted; and aircraft icing. Some issues related to internal flow grid generation are resolution requirements on several boundaries, shock resolution vs. grid periodicity, grid spacing at blade/shroud gap, grid generation in turbine blade passages, and grid generation for inlet/nozzle geometries. Aircraft icing grid generation issues include (1) small structures relative to airfoil chord must be resolved; (2) excessive number of grid points in far-field using structured grid; and (3) grid must be recreated as ice shape grows.

  10. SymPix: A Spherical Grid for Efficient Sampling of Rotationally Invariant Operators

    NASA Astrophysics Data System (ADS)

    Seljebotn, D. S.; Eriksen, H. K.

    2016-02-01

    We present SymPix, a special-purpose spherical grid optimized for efficiently sampling rotationally invariant linear operators. This grid is conceptually similar to the Gauss-Legendre (GL) grid, aligning sample points with iso-latitude rings located on Legendre polynomial zeros. Unlike the GL grid, however, the number of grid points per ring varies as a function of latitude, avoiding expensive oversampling near the poles and ensuring nearly equal sky area per grid point. The ratio between the number of grid points in two neighboring rings is required to be a low-order rational number (3, 2, 1, 4/3, 5/4, or 6/5) to maintain a high degree of symmetries. Our main motivation for this grid is to solve linear systems using multi-grid methods, and to construct efficient preconditioners through pixel-space sampling of the linear operator in question. As a benchmark and representative example, we compute a preconditioner for a linear system that involves the operator \\widehat{{\\boldsymbol{D}}}+{\\widehat{{\\boldsymbol{B}}}}T{{\\boldsymbol{N}}}-1\\widehat{{\\boldsymbol{B}}}, where \\widehat{{\\boldsymbol{B}}} and \\widehat{{\\boldsymbol{D}}} may be described as both local and rotationally invariant operators, and {\\boldsymbol{N}} is diagonal in the pixel domain. For a bandwidth limit of {{\\ell }}{max} = 3000, we find that our new SymPix implementation yields average speed-ups of 360 and 23 for {\\widehat{{\\boldsymbol{B}}}}T{{\\boldsymbol{N}}}-1\\widehat{{\\boldsymbol{B}}} and \\widehat{{\\boldsymbol{D}}}, respectively, compared with the previous state-of-the-art implementation.

  11. On Efficient Parallel Implementation of Moving Body Overset Grid Methods

    NASA Technical Reports Server (NTRS)

    Wissink, Andrew M.; Meakin, Robert L.; Warmbrodt, William (Technical Monitor)

    1997-01-01

    An investigation into the parallel performance of moving-body overset grid methods will be presented. Parallel versions of the OVERFLOW flow solver, DCF3D domain connectivity software, and SIXDO six-degree-of-freedom routine are coupled with an automatic load balance routine and tested for 3D Navier-Stokes calculations on the IBM SP2. The primary source of parallel inefficiency in moving and problems are the domain connectivity costs with DCF 3D. Although this algorithm constitutes a relatively low fraction of the total solution cost (e.g. 10-20%) in calculations on serial machines, the consequently cause a significant degradation in the overall parallel performance. The paper will highlight some approaches for improving the scalability of DCF3D. The paper will present results of a proposed new load balancing scheme that seeks more equal distribution of the inter-grid boundary points in order to more evenly load balance the donor search costs associated with DCF3D. Some preliminary results will also be given from a new solution-adaption algorithm coupled with OVERFLOW which incorporates overset cartesian grids with various levels of refinement. The measured parallel performance from a descending delta-wing configuration and a generic store-separation from a wing/pylon case will be presented.

  12. Unstructured grid generation using the distance function

    NASA Technical Reports Server (NTRS)

    Bihari, Barna L.; Chakravarthy, Sukumar R.

    1991-01-01

    A new class of methods for obtaining level sets to generate unstructured grids is presented. The consecutive grid levels are computed using the distance functions, which corresponds to solving the Hamilton-Jacobi equations representing the equations of motion of fronts propagating with curvature-dependent speed. The relationship between the distance function and the governing equations will be discussed as well as its application to generating grids. Multi-ply connected domains and complex geometries are handled naturally, with a straightforward generalization to several space dimensions. The grid points for the unstructured grid are obtained simultaneously with the grid levels. The search involved in checking for overlapping triangles is minimized by triangulating the entire domain one level at a time.

  13. ARPA-E: Advancing the Electric Grid

    ScienceCinema

    Lemmon, John; Ruiz, Pablo; Sommerer, Tim; Aziz, Michael

    2014-03-13

    The electric grid was designed with the assumption that all energy generation sources would be relatively controllable, and grid operators would always be able to predict when and where those sources would be located. With the addition of renewable energy sources like wind and solar, which can be installed faster than traditional generation technologies, this is no longer the case. Furthermore, the fact that renewable energy sources are imperfectly predictable means that the grid has to adapt in real-time to changing patterns of power flow. We need a dynamic grid that is far more flexible. This video highlights three ARPA-E-funded approaches to improving the grid's flexibility: topology control software from Boston University that optimizes power flow, gas tube switches from General Electric that provide efficient power conversion, and flow batteries from Harvard University that offer grid-scale energy storage.

  14. An interactive grid generation technique for turbomachinery

    NASA Technical Reports Server (NTRS)

    Beach, Tim

    1992-01-01

    A combination algebraic/elliptic technique is presented for the generation of 3-D grids about turbomachinery blade rows for both axial and radial flow machinery. The technique is build around use of an advanced engineering workstation to construct several 2-D grids interactively on predetermined blade-to-blade surfaces. A 3-D grid is generated by interpolating these surface grids onto an axisymmetric grid. On each blade to blade surface, a grid is created using algebraic techniques near the blade to control orthogonality within the boundary layer region and elliptic techniques in the mid-passage to achieve smoothness. The interactive definition of bezier curves as internal boundaries is the key to simple construction. The approach is adapted for use with the average passage solution technique, although this is not a limitation for most other uses. A variety of examples are presented.

  15. ARPA-E: Advancing the Electric Grid

    SciTech Connect

    Lemmon, John; Ruiz, Pablo; Sommerer, Tim; Aziz, Michael

    2014-02-24

    The electric grid was designed with the assumption that all energy generation sources would be relatively controllable, and grid operators would always be able to predict when and where those sources would be located. With the addition of renewable energy sources like wind and solar, which can be installed faster than traditional generation technologies, this is no longer the case. Furthermore, the fact that renewable energy sources are imperfectly predictable means that the grid has to adapt in real-time to changing patterns of power flow. We need a dynamic grid that is far more flexible. This video highlights three ARPA-E-funded approaches to improving the grid's flexibility: topology control software from Boston University that optimizes power flow, gas tube switches from General Electric that provide efficient power conversion, and flow batteries from Harvard University that offer grid-scale energy storage.

  16. Yin-Yang-Zhong grid: An overset grid system for a sphere

    NASA Astrophysics Data System (ADS)

    Hayashi, Hiroshi; Kageyama, Akira

    2016-01-01

    For numerical simulations inside a sphere, an overset grid system, Yin-Yang-Zhong grid, is proposed. The Yin-Yang-Zhong grid is an extension of the Yin-Yang grid, which is widely used in various simulations in spherical shell geometry. The Yin-Yang grid is itself an overset grid system with two component grids, and a new component grid called Zhong is placed at the center of the Yin-Yang grid. The Zhong grid component is constructed on Cartesian coordinates. Parallelization is intrinsically embedded in the Yin-Yang-Zhong grid system because the Zhong grid points are defined with cuboid blocks that are decomposed domains for parallelization. The computational efficiency approaches the optimum as the process number increases. Quantitative test simulations are performed for a diffusion problem in a sphere with the Yin-Yang-Zhong grid. Correct decay rates are obtained by the simulations. Two other tests in magnetohydrodynamics (MHD) in a sphere are also performed. One is an MHD dynamo simulation, and the other is an MHD relaxation simulation in a sphere.

  17. Systems Engineering Building Advances Power Grid Research

    SciTech Connect

    Virden, Jud; Huang, Henry; Skare, Paul; Dagle, Jeff; Imhoff, Carl; Stoustrup, Jakob; Melton, Ron; Stiles, Dennis; Pratt, Rob

    2015-08-19

    Researchers and industry are now better equipped to tackle the nation’s most pressing energy challenges through PNNL’s new Systems Engineering Building – including challenges in grid modernization, buildings efficiency and renewable energy integration. This lab links real-time grid data, software platforms, specialized laboratories and advanced computing resources for the design and demonstration of new tools to modernize the grid and increase buildings energy efficiency.

  18. Improved nuclear fuel assembly grid spacer

    DOEpatents

    Marshall, John; Kaplan, Samuel

    1977-01-01

    An improved fuel assembly grid spacer and method of retaining the basic fuel rod support elements in position within the fuel assembly containment channel. The improvement involves attachment of the grids to the hexagonal channel and of forming the basic fuel rod support element into a grid structure, which provides a design which is insensitive to potential channel distortion (ballooning) at high fluence levels. In addition the improved method eliminates problems associated with component fabrication and assembly.

  19. Improved Gridded Aerosol Data for India

    SciTech Connect

    Gueymard, C.; Sengupta, M.

    2013-11-01

    Using point data from ground sites in and around India equipped with multiwavelength sunphotometers, as well as gridded data from space measurements or from existing aerosol climatologies, an improved gridded database providing the monthly aerosol optical depth at 550 nm (AOD550) and Angstrom exponent (AE) over India is produced. Data from 83 sunphotometer sites are used here as ground truth tocalibrate, optimally combine, and validate monthly gridded data during the period from 2000 to 2012.

  20. Unstructured grids for sonic-boom analysis

    NASA Technical Reports Server (NTRS)

    Fouladi, Kamran

    1993-01-01

    A fast and efficient unstructured grid scheme is evaluated for sonic-boom applications. The scheme is used to predict the near-field pressure signatures of a body of revolution at several body lengths below the configuration, and those results are compared with experimental data. The introduction of the 'sonic-boom grid topology' to this scheme make it well suited for sonic-boom applications, thus providing an alternative to conventional multiblock structured grid schemes.

  1. Flow Battery Solution for Smart Grid Applications

    SciTech Connect

    none,

    2014-11-30

    To address future grid requirements, a U.S. Department of Energy ARRA Storage Demonstration program was launched in 2009 to commercialize promising technologies needed for stronger and more renewables-intensive grids. Raytheon Ktech and EnerVault received a cost-share grant award from the U.S. Department of Energy to develop a grid-scale storage system based on EnerVault’s iron-chromium redox flow battery technology.

  2. FINAL REPORT - CENTER FOR GRID MODERNIZATION

    SciTech Connect

    Markiewicz, Daniel R

    2008-06-30

    The objective of the CGM was to develop high-priority grid modernization technologies in advanced sensors, communications, controls and smart systems to enable use of real-time or near real-time information for monitoring, analyzing and managing distribution and transmission grid conditions. The key strategic approach to carry out individual CGM research and development (R&D) projects was through partnerships, primarily with the GridApp™ Consortium utility members.

  3. Grids for Dummies: Featuring Earth Science Data Mining Application

    NASA Technical Reports Server (NTRS)

    Hinke, Thomas H.

    2002-01-01

    This viewgraph presentation discusses the concept and advantages of linking computers together into data grids, an emerging technology for managing information across institutions, and potential users of data grids. The logistics of access to a grid, including the use of the World Wide Web to access grids, and security concerns are also discussed. The potential usefulness of data grids to the earth science community is also discussed, as well as the Global Grid Forum, and other efforts to establish standards for data grids.

  4. A New Elliptical Grid Clustering Method

    NASA Astrophysics Data System (ADS)

    Guansheng, Zheng

    A new base on grid clustering method is presented in this paper. This new method first does unsupervised learning on the high dimensions data. This paper proposed a grid-based approach to clustering. It maps the data onto a multi-dimensional space and applies a linear transformation to the feature space instead of to the objects themselves and then approach a grid-clustering method. Unlike the conventional methods, it uses a multidimensional hyper-eclipse grid cell. Some case studies and ideas how to use the algorithms are described. The experimental results show that EGC can discover abnormity shapes of clusters.

  5. Grid data extraction algorithm for ship routing

    NASA Astrophysics Data System (ADS)

    Li, Yuankui; Zhang, Yingjun; Yue, Xingwang; Gao, Zongjiang

    2015-05-01

    With the aim of extracting environmental data around routes, as the basis of ship routing optimization and other related studies, this paper, taking wind grid data as an example, proposes an algorithm that can effectively extract the grid data around rhumb lines. According to different ship courses, the algorithm calculates the wind grid index values in eight different situations, and a common computational formula is summarised. The wind grids around a ship route can be classified into `best-fitting' grids and `additional' grids, which are stored in such a way that, for example, when the data has a high-spacing resolution, only the `best-fitting' grids around ship routes are extracted. Finally, the algorithm was implemented and simulated with MATLAB programming. As the simulation results indicate, the algorithm designed in this paper achieved wind grid data extraction in different situations and further resolved the extraction problem of meteorological and hydrogeological field grids around ship routes efficiently. Thus, it can provide a great support for optimal ship routing related to meteorological factors.

  6. Structured adaptive grid generation using algebraic methods

    NASA Technical Reports Server (NTRS)

    Yang, Jiann-Cherng; Soni, Bharat K.; Roger, R. P.; Chan, Stephen C.

    1993-01-01

    The accuracy of the numerical algorithm depends not only on the formal order of approximation but also on the distribution of grid points in the computational domain. Grid adaptation is a procedure which allows optimal grid redistribution as the solution progresses. It offers the prospect of accurate flow field simulations without the use of an excessively timely, computationally expensive, grid. Grid adaptive schemes are divided into two basic categories: differential and algebraic. The differential method is based on a variational approach where a function which contains a measure of grid smoothness, orthogonality and volume variation is minimized by using a variational principle. This approach provided a solid mathematical basis for the adaptive method, but the Euler-Lagrange equations must be solved in addition to the original governing equations. On the other hand, the algebraic method requires much less computational effort, but the grid may not be smooth. The algebraic techniques are based on devising an algorithm where the grid movement is governed by estimates of the local error in the numerical solution. This is achieved by requiring the points in the large error regions to attract other points and points in the low error region to repel other points. The development of a fast, efficient, and robust algebraic adaptive algorithm for structured flow simulation applications is presented. This development is accomplished in a three step process. The first step is to define an adaptive weighting mesh (distribution mesh) on the basis of the equidistribution law applied to the flow field solution. The second, and probably the most crucial step, is to redistribute grid points in the computational domain according to the aforementioned weighting mesh. The third and the last step is to reevaluate the flow property by an appropriate search/interpolate scheme at the new grid locations. The adaptive weighting mesh provides the information on the desired concentration

  7. The Grid-idea and its evolution.

    SciTech Connect

    von Laszewski, G.; Mathematics and Computer Science

    2005-01-01

    In this paper we review the essence of the Grid-Idea. Specifically, we explore the changing definition of the Grid and follow its evolution over the past decade. This evolution is motivated by the gradual expansion of management issues that must be addressed to make production Grids a reality and to meet user requirements for increased functionality. Additionally, we focus on the evolutionary path of the Globus Toolkit taken to address the increasing needs of the community. We also discuss the evolutionary inclusion of commodity technologies as illustrated by the Java Commodity Grid Project.

  8. Electron Backstreaming Mitigation via a Magnetic Grid

    NASA Technical Reports Server (NTRS)

    Foster, John F.; Roman, Robert F.; Soulas, George C.; Patterson, Michael J.

    2002-01-01

    Electron backstreaming due to accelerator grid hole enlargement has been identified as a failure mechanism that will limit ion thruster service lifetime. Over extended periods of time as accelerator grid apertures enlarge due to erosion, ion thrusters are required to operate at increasingly higher accelerator grid voltages in order to prevent electron backstreaming. These higher voltages give rise to higher grid erosion rates, which in turn accelerates aperture enlargement. Presented here is an approach to mitigate the backflow of electrons into the engine by using a transverse magnetic field.

  9. Software for Refining or Coarsening Computational Grids

    NASA Technical Reports Server (NTRS)

    Daines, Russell; Woods, Jody

    2002-01-01

    A computer program performs calculations for refinement or coarsening of computational grids of the type called "structured" (signifying that they are geometrically regular and/or are specified by relatively simple algebraic expressions). This program is designed to facilitate analysis of the numerical effects of changing structured grids utilized in computational fluid dynamics (CFD) software. Unlike prior grid-refinement and -coarsening programs, this program is not limited to doubling or halving: the user can specify any refinement or coarsening ratio, which can have a noninteger value. In addition to this ratio, the program accepts, as input, a grid file and the associated restart file, which is basically a file containing the most recent iteration of flow-field variables computed on the grid. The program then refines or coarsens the grid as specified, while maintaining the geometry and the stretching characteristics of the original grid. The program can interpolate from the input restart file to create a restart file for the refined or coarsened grid. The program provides a graphical user interface that facilitates the entry of input data for the grid-generation and restart-interpolation routines.

  10. Effects of grids in drift tubes

    SciTech Connect

    Okamura M.; Yamauchi, H.

    2012-05-20

    In 2011, we upgraded a 201 MHz buncher in the proton injector for the alternating gradient synchrotron (AGS) - relativistic heavy ion collider (RHIC) complex. In the buncher we installed four grids made of tungsten to improve the transit time factor. The grid installed drift tubes have 32 mm of inner diameter and the each grid consists of four quadrants. The quadrants were cut out precisely from 1mm thick tungsten plates by a computerized numerically controlled (CNC) wire cutting electrical discharge machining (EDM). The 3D electric field of the grid was simulated.

  11. Software for Refining or Coarsening Computational Grids

    NASA Technical Reports Server (NTRS)

    Daines, Russell; Woods, Jody

    2003-01-01

    A computer program performs calculations for refinement or coarsening of computational grids of the type called structured (signifying that they are geometrically regular and/or are specified by relatively simple algebraic expressions). This program is designed to facilitate analysis of the numerical effects of changing structured grids utilized in computational fluid dynamics (CFD) software. Unlike prior grid-refinement and -coarsening programs, this program is not limited to doubling or halving: the user can specify any refinement or coarsening ratio, which can have a noninteger value. In addition to this ratio, the program accepts, as input, a grid file and the associated restart file, which is basically a file containing the most recent iteration of flow-field variables computed on the grid. The program then refines or coarsens the grid as specified, while maintaining the geometry and the stretching characteristics of the original grid. The program can interpolate from the input restart file to create a restart file for the refined or coarsened grid. The program provides a graphical user interface that facilitates the entry of input data for the grid-generation and restart-interpolation routines.

  12. Workshop on Grid Generation and Related Areas

    NASA Technical Reports Server (NTRS)

    1992-01-01

    A collection of papers given at the Workshop on Grid Generation and Related Areas is presented. The purpose of this workshop was to assemble engineers and scientists who are currently working on grid generation for computational fluid dynamics (CFD), surface modeling, and related areas. The objectives were to provide an informal forum on grid generation and related topics, to assess user experience, to identify needs, and to help promote synergy among engineers and scientists working in this area. The workshop consisted of four sessions representative of grid generation and surface modeling research and application within NASA LeRC. Each session contained presentations and an open discussion period.

  13. Ion mobility spectrometer with virtual aperture grid

    DOEpatents

    Pfeifer, Kent B.; Rumpf, Arthur N.

    2010-11-23

    An ion mobility spectrometer does not require a physical aperture grid to prevent premature ion detector response. The last electrodes adjacent to the ion collector (typically the last four or five) have an electrode pitch that is less than the width of the ion swarm and each of the adjacent electrodes is connected to a source of free charge, thereby providing a virtual aperture grid at the end of the drift region that shields the ion collector from the mirror current of the approaching ion swarm. The virtual aperture grid is less complex in assembly and function and is less sensitive to vibrations than the physical aperture grid.

  14. A Moving Grid Capability for NPARC

    NASA Technical Reports Server (NTRS)

    Slater, John W.

    1998-01-01

    Version 3.1 of the NPARC computational fluid dynamics flow solver introduces a capability to solve unsteady flow on moving multi-block, structured grids with nominally second-order time accuracy. The grid motion is due to segments of the boundary grid that translate and rotate in a rigid-body manner or deform. The grid is regenerated at each time step to accommodate the boundary grid motion. The flow equations and computational models sense the moving grid through the grid velocities, which are computed from a time-difference of the grids at two consecutive time levels. For three-dimensional flow domains, it is assumed that the grid retains a planar character with respect to one coordinate. The application and accuracy of NPARC v3.1 is demonstrated for flow about a flying wedge, rotating flap, a collapsing bump in a duct, and the upstart / restart flow in a variable-geometry inlet. The results compare well with analytic and experimental results.

  15. Spaceflight Operations Services Grid (SOSG) Project

    NASA Technical Reports Server (NTRS)

    Bradford, Robert; Lisotta, Anthony

    2004-01-01

    The motivation, goals, and objectives of the Space Operations Services Grid Project (SOSG) are covered in this viewgraph presentation. The goals and objectives of SOSG include: 1) Developing a grid-enabled prototype providing Space-based ground operations end user services through a collaborative effort between NASA, academia, and industry to assess the technical and cost feasibility of implementation of Grid technologies in the Space Operations arena; 2) Provide to space operations organizations and processes, through a single secure portal(s), access to all the information technology (Grid and Web based) services necessary for program/project development, operations and the ultimate creation of new processes, information and knowledge.

  16. Image enhancement with polymer grid triode arrays

    SciTech Connect

    Heeger, A.J.; Heeger, D.J.; Langan, J.

    1995-12-08

    An array of polymer grid triodes connected by a common grid functions as a {open_quotes}plastic retina,{close_quotes} providing local contrast gain control for image enhancement. This simple device, made from layers of conducting polymers, functions as an active resistive network that performs center-surround filtering. The polymer grid triode array with common grid is a continuous analog of the discrete approach of Mead, with a variety of fabrication advantages and significant savings in area within the unit cell of each pixel. 6 refs., 4 figs.

  17. An adaptive grid with directional control

    NASA Technical Reports Server (NTRS)

    Brackbill, J. U.

    1993-01-01

    An adaptive grid generator for adaptive node movement is here derived by combining a variational formulation of Winslow's (1981) variable-diffusion method with a directional control functional. By applying harmonic-function theory, it becomes possible to define conditions under which there exist unique solutions of the resulting elliptic equations. The results obtained for the grid generator's application to the complex problem posed by the fluid instability-driven magnetic field reconnection demonstrate one-tenth the computational cost of either a Eulerian grid or an adaptive grid without directional control.

  18. Best Practices for Unstructured Grid Shock Fitting

    NASA Technical Reports Server (NTRS)

    McCloud, Peter L.

    2017-01-01

    Unstructured grid solvers have well-known issues predicting surface heat fluxes when strong shocks are present. Various efforts have been made to address the underlying numerical issues that cause the erroneous predictions. The present work addresses some of the shortcomings of unstructured grid solvers, not by addressing the numerics, but by applying structured grid best practices to unstructured grids. A methodology for robust shock detection and shock fitting is outlined and applied to production relevant cases. Results achieved by using the Loci-CHEM Computational Fluid Dynamics solver are provided.

  19. Application Note: Power Grid Modeling With Xyce.

    SciTech Connect

    Sholander, Peter E.

    2015-06-01

    This application note describes how to model steady-state power flows and transient events in electric power grids with the SPICE-compatible Xyce TM Parallel Electronic Simulator developed at Sandia National Labs. This application notes provides a brief tutorial on the basic devices (branches, bus shunts, transformers and generators) found in power grids. The focus is on the features supported and assumptions made by the Xyce models for power grid elements. It then provides a detailed explanation, including working Xyce netlists, for simulating some simple power grid examples such as the IEEE 14-bus test case.

  20. TURBOGRID - Turbomachinery applications of grid generation

    NASA Astrophysics Data System (ADS)

    Soni, Bharat K.; Shih, Ming-Hsin

    1990-07-01

    Numerical grid generation algorithm associated with the field region about turbomachinery systems is presented. The algorithm is incorporated as a module, TIGER (Turbomachinery Interactive Grid genERation) of the modular general purpose computer code GENIE. Interactive definitions of the mathematical description of blades, hub and shroud with minimal user interactions, adaption of the weighted transfinite interpolation technique for efficient generation of grid blocks/zones, automatic construction of the Bezier curves to accomplish slope continuity, and efficient utilization of IRIS-graphics capabilities are the salient features of this algorithm which results in a significant time savings for a given turbomachinery geometry-grid application.

  1. Development of a smart DC grid model

    NASA Astrophysics Data System (ADS)

    Dalimunthe, Amty Ma'rufah Ardhiyah; Mindara, Jajat Yuda; Panatarani, Camellia; Joni, I. Made

    2016-03-01

    Smart grid and distributed generation should be the solution of the global climate change and the crisis energy of the main source of electrical power generation which is fossil fuel. In order to meet the rising electrical power demand and increasing service quality demands, as well as reduce pollution, the existing power grid infrastructure should be developed into a smart grid and distributed power generation which provide a great opportunity to address issues related to energy efficiency, energy security, power quality and aging infrastructure systems. The conventional of the existing distributed generation system is an AC grid while for a renewable resources requires a DC grid system. This paper explores the model of smart DC grid by introducing a model of smart DC grid with the stable power generation give a minimal and compressed circuitry that can be implemented very cost-effectively with simple components. The PC based application software for controlling was developed to show the condition of the grid and to control the grid become `smart'. The model is then subjected to a severe system perturbation, such as incremental change in loads to test the performance of the system again stability. It is concluded that the system able to detect and controlled the voltage stability which indicating the ability of power system to maintain steady voltage within permissible rangers in normal condition.

  2. Investing in a master's degree.

    PubMed

    Hodges, L C; Ganchorre, C; Hodges, E A

    1997-10-01

    One of the most important decisions you will ever make is the decision to invest your time and money in a master's degree. It is a big investment and often requires real sacrifice for you and your family. Since this decision is of paramount importance over the life of your career, it should be approached as a major topic to research. The first step in the process is a thorough review of your own goals and career expectations. Once you decide returning to graduate school is right for you, then you must turn your attention to finding the school that meets your goals for specialized study, as well as the location that best suits your lifestyle. A good place to start the search is in the library among a number of up-to-date references on master's nursing programs. A second source is the Internet. To find out more about the school locations, two good sources are the city's chamber of commerce and the Internet. Acquiring a master's degree in nursing will be a challenge, but one that will pay big dividends in your future nursing career. PMID:9384158

  3. The Kilo-Degree Survey

    NASA Astrophysics Data System (ADS)

    de Jong, J. T. A.; Kuijken, K.; Applegate, D.; Begeman, K.; Belikov, A.; Blake, C.; Bout, J.; Boxhoorn, D.; Buddelmeijer, H.; Buddendiek, A.; Cacciato, M.; Capaccioli, M.; Choi, A.; Cordes, O.; Covone, G.; Dall'Ora, M.; Edge, A.; Erben, T.; Franse, J.; Getman, F.; Grado, A.; Harnois-Deraps, J.; Helmich, E.; Herbonnet, R.; Heymans, C.; Hildebrandt, H.; Hoekstra, H.; Huang, Z.; Irisarri, N.; Joachimi, B.; Köhlinger, F.; Kitching, T.; La Barbera, F.; Lacerda, P.; McFarland, J.; Miller, L.; Nakajima, R.; Napolitano, N. R.; Paolillo, M.; Peacock, J.; Pila-Diez, B.; Puddu, E.; Radovich, M.; Rifatto, A.; Schneider, P.; Schrabback, T.; Sifon, C.; Sikkema, G.; Simon, P.; Sutherland, W.; Tudorica, A.; Valentijn, E.; van der Burg, R.; van Uitert, E.; van Waerbeke, L.; Velander, M.; Kleijn, G. V.; Viola, M.; Vriend, W.-J.

    2013-12-01

    The Kilo-Degree Survey (KiDS), a 1500-square-degree optical imaging survey with the recently commissioned OmegaCAM wide-field imager on the VLT Survey Telescope (VST), is described. KiDS will image two fields in u-,g-,r- and i-bands and, together with the VIKING survey, produce nine-band (u- to K-band) coverage over two fields. For the foreseeable future the KiDS/VIKING combination of superb image quality with wide wavelength coverage will be unique for surveys of its size and depth. The survey has been designed to tackle some of the most fundamental questions of cosmology and galaxy formation of today. The main science driver is mapping the dark matter distribution in the Universe and putting constraints on the expansion of the Universe and the equation of state of dark energy, all through weak gravitational lensing. However, the deep and wide imaging data will facilitate a wide variety of science cases.

  4. Policy Statements for the Associate Degree, the Associate in Applied Science Degree, and the Associate Degree in Nursing.

    ERIC Educational Resources Information Center

    American Association of Community and Junior Colleges, Washington, DC.

    The policy statements contained in this document present the position of the American Association of Community and Junior Colleges (AACJC) on the Associate Degree, the Associate in Applied Science Degree (AAS), and the Associate Degree in Nursing. In its statement on the Associate Degree, the AACJC: (1) stresses the responsibility of faculty and…

  5. Hyperbolic Prismatic Grid Generation and Solution of Euler Equations on Prismatic Grids

    NASA Technical Reports Server (NTRS)

    Pandya, S. A.; Chattot, JJ; Hafez, M. M.; Kutler, Paul (Technical Monitor)

    1994-01-01

    A hyperbolic grid generation method is used to generate prismatic grids and an approach using prismatic grids to solve the Euler equations is presented. The theory of the stability and feasibility of the hyperbolic grid generation method is presented. The hyperbolic grid generation method of Steger et al for structured grids is applied to a three dimensional triangularized surface definition to generate a grid that is unstructured on each successive layer. The grid, however, retains structure in the body-normal direction and has a computational cell shaped like a triangular prism. In order to take advantage of the structure in the normal direction, a finite-volume scheme that treats the unknowns along the normal direction implicitly is introduced and the flow over a sphere is simulated.

  6. Structured background grids for generation of unstructured grids by advancing front method

    NASA Technical Reports Server (NTRS)

    Pirzadeh, Shahyar

    1991-01-01

    A new method of background grid construction is introduced for generation of unstructured tetrahedral grids using the advancing-front technique. Unlike the conventional triangular/tetrahedral background grids which are difficult to construct and usually inadequate in performance, the new method exploits the simplicity of uniform Cartesian meshes and provides grids of better quality. The approach is analogous to solving a steady-state heat conduction problem with discrete heat sources. The spacing parameters of grid points are distributed over the nodes of a Cartesian background grid by interpolating from a few prescribed sources and solving a Poisson equation. To increase the control over the grid point distribution, a directional clustering approach is used. The new method is convenient to use and provides better grid quality and flexibility. Sample results are presented to demonstrate the power of the method.

  7. Ion dispersion near parallel wire grids in orthogonal acceleration time-of-flight mass spectrometry: predicting the effect of the approach angle on resolution.

    PubMed

    Lewin, Mark; Guilhaus, Michael; Wildgoose, Jason; Hoyes, John; Bateman, Bob

    2002-01-01

    Ions experience small deflections in the vicinity of grids in accelerators and ion mirrors in time-of-flight (TOF) mass spectrometers. Recent experiments with an orthogonal acceleration (oa) TOF instrument have verified that the effect can significantly degrade resolution when ions approach grids at an angle deviating from 90 degrees. The phenomenon becomes significant only when ions have components of velocity at right angles to the wires of the grids. A model is presented in this study to predict this phenomenon for parallel wire grids. The fractional energy spread of ions (calculated in the static TOF-spectrometer frame of reference) scales directly with the approach angle of ions to the grid (as measured from normal approach). The energy spread also scales with the range of angles that is a consequence of the focusing effect in each gap between the wires of the grid. The equations imply that closely spaced parallel wire grids are best for deployment in oa-TOF systems where non-zero approach angles are unavoidable. Such grids are relatively impractical to manufacture and support but rectangular repeat cell grids with relatively few wires at right angles to the source axis are shown experimentally to introduce minimal energy spread. When these grids are rotated by 90 degrees, the resolution measured in a Q-TOF spectrometer is degraded in approximate agreement with the parallel wire model. A practical implication of this work is that grid transmissions in oa-TOF systems may be significantly increased without loss of resolution. Improvements of approximately 200% (V-mode) and approximately 400% (W-mode) in ion transmission were obtained in this study without compromising resolution. This was achieved with approximately 73% transmission grids and greater potential improvements in transmission are being realised since this study with approximately 89% transmission grids having similar geometry. PMID:11870899

  8. Data Structure and Parallel Decomposition Considerations on a Fibonacci Grid

    NASA Technical Reports Server (NTRS)

    Michalakes, John; Purser,James; Swinbank, Richard

    1999-01-01

    The Fibonacci grid, proposed by Swinbank and Purser (see companion abstract), provides attractive properties for global numerical atmospheric prediction by offering an optimally homogeneous, geometrically regular, and approximately isotropic discretization, with only the polar regions requiring special numerical treatment. It is a mathematical idealization, applied to the sphere, of the multi-spiral patterns often found in botanical structures, such as in pine cones and sunflower heads. Computationally, it is natural to organize the domain, into zones, in each of which the same pair, or triple, of "Fibonacci spirals" dominate. But the further subdivision of such zones into "tiles" of a shape and size suitable for distribution to the processors of a massively parallel computer requires very careful consideration if the subsequent spatial computations along the respective spirals, especially those computations (such as compact differencing schemes) that involve recursion, can be implemented in an efficient "load-balanced "manner without requiring excessive amounts of inter-processor communications. In this paper we show how certain "number theoretic" properties of the Fibonacci sequence (whose numbers prescribe the multiplicity of successive spirals) may be exploited in the decomposition of grid zones into tidy arrangements of triangular grid tiles, each tile possessing one side approximately parallel to the constant-latitude zone boundary. We also describe how the spatially recursive processes may be decomposed across such a tiling, and the directionality of the recursions reversed on alternate grid lines, to ensure a very high degree of load balancing throughout the execution of the computations required for one time step of a global model.

  9. DRAGON Grid: A Three-Dimensional Hybrid Grid Generation Code Developed

    NASA Technical Reports Server (NTRS)

    Liou, Meng-Sing

    2000-01-01

    Because grid generation can consume 70 percent of the total analysis time for a typical three-dimensional viscous flow simulation for a practical engineering device, payoffs from research and development could reduce costs and increase throughputs considerably. In this study, researchers at the NASA Glenn Research Center at Lewis Field developed a new hybrid grid approach with the advantages of flexibility, high-quality grids suitable for an accurate resolution of viscous regions, and a low memory requirement. These advantages will, in turn, reduce analysis time and increase accuracy. They result from an innovative combination of structured and unstructured grids to represent the geometry and the computation domain. The present approach makes use of the respective strengths of both the structured and unstructured grid methods, while minimizing their weaknesses. First, the Chimera grid generates high-quality, mostly orthogonal meshes around individual components. This process is flexible and can be done easily. Normally, these individual grids are required overlap each other so that the solution on one grid can communicate with another. However, when this communication is carried out via a nonconservative interpolation procedure, a spurious solution can result. Current research is aimed at entirely eliminating this undesired interpolation by directly replacing arbitrary grid overlapping with a nonstructured grid called a DRAGON grid, which uses the same set of conservation laws over the entire region, thus ensuring conservation everywhere. The DRAGON grid is shown for a typical film-cooled turbine vane with 33 holes and 3 plenum compartments. There are structured grids around each geometrical entity and unstructured grids connecting them. In fiscal year 1999, Glenn researchers developed and tested the three-dimensional DRAGON grid-generation tools. A flow solver suitable for the DRAGON grid has been developed, and a series of validation tests are underway.

  10. Gridded monthly temperatures over Italy

    NASA Astrophysics Data System (ADS)

    Fioravanti, G.; Toreti, A.; Fraschetti, P.; Perconti, W.; Desiato, F.

    2010-09-01

    Temperature data represent a relevant source of information for environmental modelling, which usually relies on the availability of regularly distributed datasets. The CRU and the E-OBS archives are two examples of large-scale gridded products available for temperature. In order to fill the gap of having such a dataset freely available at national level, a high resolution (1 km) dataset for the whole Italian territory has been realized, made up of gridded monthly mean temperatures over Italy from 1961 to 2008. Available temperature data are provided by several national and regional networks and are consequently rather discontinuous in time and inhomogeneous in space. For this reason, our approach is based on the use of all data available for each month; this choice limits the consistency of gridded temperatures as time series but guarantees the best possible spatial estimate for each time period. The space interpolation was implemented by means of regression-kriging, a well-known geostatistical approach. Regression kriging is a variant of kriging interpolation which allows to exploit the auxiliary information provided by external variables. In this work, altitude and latitude of the input weather stations were found to be strongly correlated with temperature data and used as independent variables in the regression model. Ordinary kriging was then applied to describe the spatial correlation structure of the regression residuals. For each map, the most appropriate variogram function was estimated by means of an objective algorithm. In order to evaluate the quality of each interpolated surface, a cross validation analysis was performed, whose results were evaluated in terms of root mean square error, mean absolute error and mean squared deviation ratio. RMSE ranges between 1.0 and 1.5 °C, and improves, as expected, over the last years when a greater number of stations are available. The RMSE as function of the season was investigated as well. The monthly maps were

  11. Multi-purpose grid-tied inverter with smart grid capabilities

    NASA Astrophysics Data System (ADS)

    Liyanagedera, Chamika Mihiranga

    Distributed energy storages play an important role in increasing the reliability and efficiency of the grid through means of peak load shaving, grid voltage support, and grid frequency support. It is important to have distributed energy storages that can utilize the functionalities of the modern smart grid to operate more effectively. The grid-tied inverter is one of the major components in a distributed energy storage that controls the power transfer between the grid and an energy storage device. In this research, a grid-tied inverter that can be used in distributed energy storage applications was designed, developed, and tested. This grid-tied inverter was designed with the capability to control both reactive and active power flow in either direction. The grid-tied inverter is equipped with communication capabilities so it can be remotely controlled by commands sent through a smart grid network. For demonstrative purposes, a user interface was developed to control and monitor the operation of the grid-tied inverter. Finally the operation of the grid-tied inverter was evaluated in accordance to IEEE 1547, the Standard for Interconnecting Distributed Resources with Electric Power Systems.

  12. Parallel Grid Manipulations in Earth Science Calculations

    NASA Technical Reports Server (NTRS)

    Sawyer, W.; Lucchesi, R.; daSilva, A.; Takacs, L. L.

    1999-01-01

    The National Aeronautics and Space Administration (NASA) Data Assimilation Office (DAO) at the Goddard Space Flight Center is moving its data assimilation system to massively parallel computing platforms. This parallel implementation of GEOS DAS will be used in the DAO's normal activities, which include reanalysis of data, and operational support for flight missions. Key components of GEOS DAS, including the gridpoint-based general circulation model and a data analysis system, are currently being parallelized. The parallelization of GEOS DAS is also one of the HPCC Grand Challenge Projects. The GEOS-DAS software employs several distinct grids. Some examples are: an observation grid- an unstructured grid of points at which observed or measured physical quantities from instruments or satellites are associated- a highly-structured latitude-longitude grid of points spanning the earth at given latitude-longitude coordinates at which prognostic quantities are determined, and a computational lat-lon grid in which the pole has been moved to a different location to avoid computational instabilities. Each of these grids has a different structure and number of constituent points. In spite of that, there are numerous interactions between the grids, e.g., values on one grid must be interpolated to another, or, in other cases, grids need to be redistributed on the underlying parallel platform. The DAO has designed a parallel integrated library for grid manipulations (PILGRIM) to support the needed grid interactions with maximum efficiency. It offers a flexible interface to generate new grids, define transformations between grids and apply them. Basic communication is currently MPI, however the interfaces defined here could conceivably be implemented with other message-passing libraries, e.g., Cray SHMEM, or with shared-memory constructs. The library is written in Fortran 90. First performance results indicate that even difficult problems, such as above-mentioned pole rotation- a

  13. Modeling and Grid Generation of Iced Airfoils

    NASA Technical Reports Server (NTRS)

    Vickerman, Mary B.; Baez, Marivell; Braun, Donald C.; Hackenberg, Anthony W.; Pennline, James A.; Schilling, Herbert W.

    2007-01-01

    SmaggIce Version 2.0 is a software toolkit for geometric modeling and grid generation for two-dimensional, singleand multi-element, clean and iced airfoils. A previous version of SmaggIce was described in Preparing and Analyzing Iced Airfoils, NASA Tech Briefs, Vol. 28, No. 8 (August 2004), page 32. To recapitulate: Ice shapes make it difficult to generate quality grids around airfoils, yet these grids are essential for predicting ice-induced complex flow. This software efficiently creates high-quality structured grids with tools that are uniquely tailored for various ice shapes. SmaggIce Version 2.0 significantly enhances the previous version primarily by adding the capability to generate grids for multi-element airfoils. This version of the software is an important step in streamlining the aeronautical analysis of ice airfoils using computational fluid dynamics (CFD) tools. The user may prepare the ice shape, define the flow domain, decompose it into blocks, generate grids, modify/divide/merge blocks, and control grid density and smoothness. All these steps may be performed efficiently even for the difficult glaze and rime ice shapes. Providing the means to generate highly controlled grids near rough ice, the software includes the creation of a wrap-around block (called the "viscous sublayer block"), which is a thin, C-type block around the wake line and iced airfoil. For multi-element airfoils, the software makes use of grids that wrap around and fill in the areas between the viscous sub-layer blocks for all elements that make up the airfoil. A scripting feature records the history of interactive steps, which can be edited and replayed later to produce other grids. Using this version of SmaggIce, ice shape handling and grid generation can become a practical engineering process, rather than a laborious research effort.

  14. IS Degrees - Sociotechnical or Technosocial?

    NASA Astrophysics Data System (ADS)

    Coady, Jenny; Pooley, Rob

    It is widely agreed that information systems is a field requiring knowledge and competence, spanning business processes, information infrastructure and technical processes, uniting these to deliver information needs of organisations. In designing curricula which will educate new IS professionals appropriately, we are faced with a daunting range and volume of material. Despite attempts to structure and scope this, the problems remain and become worse with time. We revisit such a degree course, noting that many existing courses are based in management and business schools. We, however, are based in a computer science department. We have experience of convincing technologically focused students that understanding organisational and social issues is crucial to successful software engineering and students with an interest in organisations and people that they need technical understanding of information systems. We review some key proposals for IS model curricula and conclude with a proposal suited to the students we recruit.

  15. 360-degree 3D profilometry

    NASA Astrophysics Data System (ADS)

    Song, Yuanhe; Zhao, Hong; Chen, Wenyi; Tan, Yushan

    1997-12-01

    A new method of 360 degree turning 3D shape measurement in which light sectioning and phase shifting techniques are both used is presented in this paper. A sine light field is applied in the projected light stripe, meanwhile phase shifting technique is used to calculate phases of the light slit. Thereafter wrapped phase distribution of the slit is formed and the unwrapping process is made by means of the height information based on the light sectioning method. Therefore phase measuring results with better precision can be obtained. At last the target 3D shape data can be produced according to geometric relationships between phases and the object heights. The principles of this method are discussed in detail and experimental results are shown in this paper.

  16. Professional Schools Seek Degrees of Cooperation.

    ERIC Educational Resources Information Center

    Mangan, Katherine S.

    2001-01-01

    Discusses how professional schools, faced with a shortage of students and an increased demand for cross-disciplinary training, are teaming up to offer joint degrees. Examples include joint medical and business degrees, joint social work and law degrees, and joint medical and law degrees. (EV)

  17. [Usefulness of a grid using fiber interspace material].

    PubMed

    Murakami, Junki; Nakamae, Mitsuhiro; Ueda, Mamoru

    2014-10-01

    We had the opportunity to employ an anti-scatter grid, which uses fiber as the interspace material. The X-ray transmission rate of fiber is higher than aluminum, so we predicted that the use of a fiber grid would reduce radiation exposure. The purpose of this study was to evaluate the usefulness of the fiber grid. The physical characteristics and influence of focus-grid decentering were compared between the fiber grid and three kinds of antiscatter grids that use aluminum as the interspace material (Al grid). The contrast improvement factor and selectivity of the fiber grid was higher than the Al grid, and the Bucky factor of the fiber grid was lower. The interspace material and grid ratio also influenced focus-grid decentering. The results of this study suggest the potential for reduction of radiation exposure by the use of a fiber grid. PMID:25327425

  18. Gridded meteorological data as a resource for mechanistic macroecology in coastal environments.

    PubMed

    Mislan, K A S; Wethey, David S

    2011-10-01

    Gridded weather data were evaluated as sources of forcing variables for biophysical models of intertidal animal body temperature with model results obtained using local weather station data serving as the baseline of comparison. The objective of the study was to determine which gridded data are sufficient to capture observed patterns of thermal stress. Three coastal sites in western North America were included in this analysis: Boiler Bay, Oregon; Bodega Bay, California; and Pacific Grove, California. The gridded data with the highest spatial resolution, the 32-km North American Regional Reanalysis (NARR) and the 38-km Climate Forecasting System Reanalysis (CFSR), predicted daily maximum intertidal animal temperature most similarly to the local weather Station data. Time step size was important for variables that change rapidly throughout the day, such as solar radiation. There were site-based differences in the ability of the model to predict daily maximum intertidal animal temperature, with the gridded data predictions being the closest to local weather station predictions in Boiler Bay, Oregon. In a review of gridded data used as part of ecological studies, there was broad use of the data across subject areas and ecosystems so the recent improvements in the spatial (from 2 degrees to 32 km) and temporal scales (from 6 hours to 1 hour) of gridded data will further add to the applicability within the ecological community particularly for mechanistic studies. PMID:22073652

  19. Unstructured 3D grid toolbox for modeling and simulation

    SciTech Connect

    George, D.

    1997-11-01

    Computable 3D grids that accurately represent complex multimaterial geometries are essential for both static and time-dependent modeling and simulation. LaGriT, the grid toolbox developed at Los Alamos provides a sophisticated set of initial grid generation, grid maintenance and grid optimization tools. We present example grids that demonstrate the flexibility of the grid generator. Additionally, we present the results of an electrostatic calculation and a grain growth problem that illustrate the grid optimization features and the utility of the grid server architecture.

  20. One-Dimensional Grid Turbulence

    NASA Astrophysics Data System (ADS)

    Kerstein, Alan R.; Nilsen, Vebjørn

    1998-11-01

    To capture molecular mixing and other small scale phenomena such as chemical reactions and differential diffusion, it is essential to resolve all the length (and time) scales. For large Reynolds number flows this is impossible to do in three-dimensional turbulence simulations with the current and foreseeable future computer technology. To circumvent this problem the one-dimensional turbulence (ODT) model, as the name implies, considers only one spatial dimension in which all the length scales can be resolved even at very large Reynolds numbers. To incorporate the effect of advection on a one-dimensional domain, the evolution of the velocity and scalar profiles is randomly interrupted by a sequence of profile rearrangements representing the effect of turbulent eddies. Results obtained from ODT simulations of grid turbulence with a passive scalar are presented. The decay exponents for the velocity and passive scalar fluctuations, as predicted by ODT, compare favorably with experimental data.

  1. Spaceflight Operations Services Grid Prototype

    NASA Technical Reports Server (NTRS)

    Bradford, Robert N.; Mehrotra, Piyush; Lisotta, Anthony

    2004-01-01

    NASA over the years has developed many types of technologies and conducted various types of science resulting in numerous variations of operations, data and applications. For example, operations range from deep space projects managed by JPL, Saturn and Shuttle operations managed from JSC and KSC, ISS science operations managed from MSFC and numerous low earth orbit satellites managed from GSFC that are varied and intrinsically different but require many of the same types of services to fulfill their missions. Also, large data sets (databases) of Shuttle flight data, solar system projects and earth observing data exist which because of their varied and sometimes outdated technologies are not and have not been fully examined for additional information and knowledge. Many of the applications/systems supporting operational services e.g. voice, video, telemetry and commanding, are outdated and obsolete. The vast amounts of data are located in various formats, at various locations and range over many years. The ability to conduct unified space operations, access disparate data sets and to develop systems and services that can provide operational services does not currently exist in any useful form. In addition, adding new services to existing operations is generally expensive and with the current budget constraints not feasible on any broad level of implementation. To understand these services a discussion of each one follows. The Spaceflight User-based Services are those services required to conduct space flight operations. Grid Services are those Grid services that will be used to overcome, through middleware software, some or all the problems that currently exists. In addition, Network Services will be discussed briefly. Network Services are crucial to any type of remedy and are evolving adequately to support any technology currently in development.

  2. Tech-Prep/Associate Degree Program Guide: Tech Prep Associate Degree Program, Business Administration Associate Degree Program, Office Administration Associate Degree Program, Allied Health Associate Degree Program.

    ERIC Educational Resources Information Center

    Marmaras, Judy; Neri, Pat

    The Tech-Prep Associate Degree Program (TPAD) at the Community College of Rhode Island (CCRI) in Warwick, is a high school/community college partnership providing high school students with an alternative program of study focused on goal setting, basic academic skills development, and the skills needed to pursue a career in a technical, business or…

  3. Procedure for locating 10 km UTM grid on Alabama County general highway maps

    NASA Technical Reports Server (NTRS)

    Paludan, C. T. N.

    1975-01-01

    Each county highway map has a geographic grid of degrees and tens of minutes in both longitude and latitude in the margins and within the map as intersection crosses. These will be used to locate the universal transverse mercator (UTM) grid at 10 km intervals. Since the maps used may have stretched or shrunk in height and/or width, interpolation should be done between the 10 min intersections when possible. A table of UTM coordinates of 10 min intersections is required and included. In Alabama, all eastings are referred to a false easting of 500,000 m at 87 deg W longitude (central meridian, CM).

  4. Grid generation: A view from the trenches

    NASA Technical Reports Server (NTRS)

    Ives, David; Miller, Robert; Siddons, William; Vandyke, Kevin

    1995-01-01

    This paper presents 'A view from the trenches' on CFD grid generation from a Pratt & Whitney perspective. We anticipate that other organizations have similar views. We focus on customer expectations and the consequent requirements. We enunciate a vision for grid generation, discuss issues that developers must recognize.

  5. Unstructured Grid Generation Techniques and Software

    NASA Technical Reports Server (NTRS)

    Posenau, Mary-Anne K. (Editor)

    1993-01-01

    The Workshop on Unstructured Grid Generation Techniques and Software was conducted for NASA to assess its unstructured grid activities, improve the coordination among NASA centers, and promote technology transfer to industry. The proceedings represent contributions from Ames, Langley, and Lewis Research Centers, and the Johnson and Marshall Space Flight Centers. This report is a compilation of the presentations made at the workshop.

  6. NESTED GRID MESOSCALE ATMOSPHERIC CHEMISTRY MODEL

    EPA Science Inventory

    A nested grid version of the Regional Acid Deposition Model (RADM) has been developed. he horizontal grid interval size of the nested model is 3 times smaller than that of RADM (80/3 km 26.7 km). herefore the nested model is better able to simulate mesoscale atmospheric processes...

  7. Assessing Interpersonal Perceptions Using the Interpersonal Grid

    ERIC Educational Resources Information Center

    Moskowitz, D. S.; Zuroff, David C.

    2005-01-01

    Three studies were conducted using the interpersonal grid, a method for assessing perceptions of agentic and communal behavior based on the interpersonal circumplex. The 1st examined consistency across perceivers and convergence between perceiver and the perceived person. The 2nd examined whether responses to the interpersonal grid were sensitive…

  8. Simulation of Grid-Fin Control Surfaces

    NASA Technical Reports Server (NTRS)

    Aftosmis, Michael J.

    2011-01-01

    Conference poster using previously disclosed techniques and methods (see ARC 16210 & 16212). We present simulations of grid-fin control surfaces to demonstrate geometric complexity and numerical robustness. These results have relevance to high-performance computing and performance of grid-fin-based control systems.

  9. Computing Flows Using Chimera and Unstructured Grids

    NASA Technical Reports Server (NTRS)

    Liou, Meng-Sing; Zheng, Yao

    2006-01-01

    DRAGONFLOW is a computer program that solves the Navier-Stokes equations of flows in complexly shaped three-dimensional regions discretized by use of a direct replacement of arbitrary grid overlapping by nonstructured (DRAGON) grid. A DRAGON grid (see figure) is a combination of a chimera grid (a composite of structured subgrids) and a collection of unstructured subgrids. DRAGONFLOW incorporates modified versions of two prior Navier-Stokes-equation-solving programs: OVERFLOW, which is designed to solve on chimera grids; and USM3D, which is used to solve on unstructured grids. A master module controls the invocation of individual modules in the libraries. At each time step of a simulated flow, DRAGONFLOW is invoked on the chimera portion of the DRAGON grid in alternation with USM3D, which is invoked on the unstructured subgrids of the DRAGON grid. The USM3D and OVERFLOW modules then immediately exchange their solutions and other data. As a result, USM3D and OVERFLOW are coupled seamlessly.

  10. Towards Verification of Unstructured-Grid Solvers

    NASA Technical Reports Server (NTRS)

    Thomas, James L.; Diskin, Boris; Rumsey, Christopher L.

    2008-01-01

    New methodology for verification of finite-volume computational methods using unstructured grids is presented. The discretization order properties are studied in computational windows, easily constructed within a collection of grids or a single grid. Tests are performed within each window and address a combination of problem-, solution-, and discretization/grid-related features affecting discretization error convergence. The windows can be adjusted to isolate particular elements of the computational scheme, such as the interior discretization, the boundary discretization, or singularities. Studies can use traditional grid-refinement computations within a fixed window or downscaling, a recently-introduced technique in which computations are made within windows contracting toward a focal point of interest. Grids within the windows are constrained to be consistently refined, allowing a meaningful assessment of asymptotic error convergence on unstructured grids. Demonstrations of the method are shown, including a comparative accuracy assessment of commonly-used schemes on general mixed grids and the identification of local accuracy deterioration at boundary intersections. Recommendations to enable attainment of design-order discretization errors for large-scale computational simulations are given.

  11. VGRIDSG: An unstructured surface grid generation program

    NASA Technical Reports Server (NTRS)

    Bockelie, Michael J.

    1993-01-01

    This report contains an overview of the VGRIDSG unstructured surface grid generation program. The VGRIDSG program was created from the VGRID3D unstructured grid generation program developed by Vigyan, Inc. The purpose of this report is to document the changes from the original VGRID3D program and to describe the capabilities of the new program.

  12. Grid Convergence for Turbulent Flows(Invited)

    NASA Technical Reports Server (NTRS)

    Diskin, Boris; Thomas, James L.; Rumsey, Christopher L.; Schwoppe, Axel

    2015-01-01

    A detailed grid convergence study has been conducted to establish accurate reference solutions corresponding to the one-equation linear eddy-viscosity Spalart-Allmaras turbulence model for two dimensional turbulent flows around the NACA 0012 airfoil and a flat plate. The study involved three widely used codes, CFL3D (NASA), FUN3D (NASA), and TAU (DLR), and families of uniformly refined structured grids that differ in the grid density patterns. Solutions computed by different codes on different grid families appear to converge to the same continuous limit, but exhibit different convergence characteristics. The grid resolution in the vicinity of geometric singularities, such as a sharp trailing edge, is found to be the major factor affecting accuracy and convergence of discrete solutions, more prominent than differences in discretization schemes and/or grid elements. The results reported for these relatively simple turbulent flows demonstrate that CFL3D, FUN3D, and TAU solutions are very accurate on the finest grids used in the study, but even those grids are not sufficient to conclusively establish an asymptotic convergence order.

  13. The Administrative Grid: A Leader Style Model.

    ERIC Educational Resources Information Center

    Coleman, Donald G.; Heun, Richard E.

    The Administrative Grid was developed to aid in rapid interpretation of orthogonal data on management style. The grid is a simple device for illustrating Z-score values from any instrument with orthogonality determined and scores normalized. The two dimensions, "people" and "task,"are divided into standard deviations and, by plotting perpendicular…

  14. Features of the Java commodity grid kit.

    SciTech Connect

    von Laszewski, G.; Gawor, J.; Lane, P.; Rehn, N.; Russell, M.; Mathematics and Computer Science

    2002-11-01

    In this paper we report on the features of the Java Commodity Grid Kit (Java CoG Kit). The Java CoG Kit provides middleware for accessing Grid functionality from the Java framework. Java CoG Kit middleware is general enough to design a variety of advanced Grid applications with quite different user requirements. Access to the Grid is established via Globus Toolkit protocols, allowing the Java CoG Kit to also communicate with the services distributed as part of the C Globus Toolkit reference implementation. Thus, the Java CoG Kit provides Grid developers with the ability to utilize the Grid, as well as numerous additional libraries and frameworks developed by the Java community to enable network, Internet, enterprise and peer-to-peer computing. A variety of projects have successfully used the client libraries of the Java CoG Kit to access Grids driven by the C Globus Toolkit software. In this paper we also report on the efforts to develop serverside Java CoG Kit components. As part of this research we have implemented a prototype pure Java resource management system that enables one to run Grid jobs on platforms on which a Java virtual machine is supported, including Windows NT machines.

  15. Carbon-carbon grid for ion engines

    NASA Technical Reports Server (NTRS)

    Garner, Charles E. (Inventor)

    1993-01-01

    A method and apparatus of manufacturing a grid member for use in an ion discharge apparatus provides a woven carbon fiber in a matrix of carbon. The carbon fibers are orientated to provide a negatibe coefficient of thermal expansion for at least a portion of the grid member's operative range of use.

  16. Carbon-carbon grid for ion engines

    NASA Technical Reports Server (NTRS)

    Garner, Charles E. (Inventor)

    1995-01-01

    A method and apparatus of manufacturing a grid member for use in an ion discharge apparatus provides a woven carbon fiber in a matrix of carbon. The carbon fibers are orientated to provide a negatibe coefficient of thermal expansion for at least a portion of the grid member's operative range of use.

  17. Uncertainty in gridded CO2 emissions estimates

    NASA Astrophysics Data System (ADS)

    Hogue, Susannah; Marland, Eric; Andres, Robert J.; Marland, Gregg; Woodard, Dawn

    2016-05-01

    We are interested in the spatial distribution of fossil-fuel-related emissions of CO2 for both geochemical and geopolitical reasons, but it is important to understand the uncertainty that exists in spatially explicit emissions estimates. Working from one of the widely used gridded data sets of CO2 emissions, we examine the elements of uncertainty, focusing on gridded data for the United States at the scale of 1° latitude by 1° longitude. Uncertainty is introduced in the magnitude of total United States emissions, the magnitude and location of large point sources, the magnitude and distribution of non-point sources, and from the use of proxy data to characterize emissions. For the United States, we develop estimates of the contribution of each component of uncertainty. At 1° resolution, in most grid cells, the largest contribution to uncertainty comes from how well the distribution of the proxy (in this case population density) represents the distribution of emissions. In other grid cells, the magnitude and location of large point sources make the major contribution to uncertainty. Uncertainty in population density can be important where a large gradient in population density occurs near a grid cell boundary. Uncertainty is strongly scale-dependent with uncertainty increasing as grid size decreases. Uncertainty for our data set with 1° grid cells for the United States is typically on the order of ±150%, but this is perhaps not excessive in a data set where emissions per grid cell vary over 8 orders of magnitude.

  18. Electricity grid: When the lights go out

    NASA Astrophysics Data System (ADS)

    Dobson, Ian

    2016-05-01

    The resilience of distribution power grids is put to the test by daily operations as well as by extreme weather events such as hurricanes. An analysis of blackout data in upstate New York now reveals that larger blackouts have a disproportionate effect on grid reliability.

  19. Applications of GridPix detectors

    NASA Astrophysics Data System (ADS)

    Blanco Carballo, V.; Chefdeville, M.; Decowski, M. P.; Fransen, M.; van der Graaf, H.; Koppert, W. J. C.; Schmitz, J.

    2010-02-01

    GridPix detectors provide an excellent tracking and vertex determination for internal radioactive sources with a 4π angular acceptance. In both WIMP search and neutrinoless double beta decay experiments, we expect that GridPix detectors have the ability to significantly improve the measurements.

  20. Conservative treatment of boundary interfaces for overlaid grids and multi-level grid adaptations

    NASA Technical Reports Server (NTRS)

    Moon, Young J.; Liou, Meng-Sing

    1989-01-01

    Conservative algorithms for boundaray interfaces of overlaid grids are presented. The basic method is zeroth order, and is extended to a higher order method using interpolation and subcell decomposition. The present method, strictly based on a conservative constraint, is tested with overlaid grids for various applications of unsteady and steady supersonic inviscid flows with strong shock waves. The algorithm is also applied to a multi-level grid adaptation in which the next level finer grid is overlaid on the coarse base grid with an arbitrary orientation.

  1. Conservative treatment of boundary interfaces for overlaid grids and multi-level grid adaptations

    NASA Technical Reports Server (NTRS)

    Moon, Young J.; Liou, Meng-Sing

    1989-01-01

    Conservative algorithms for boundary interfaces of overlaid grids are presented. The basic method is zeroth order, and is extended to a higher order method using interpolation and subcell decomposition. The present method, strictly based on a conservative constraint, is tested with overlaid grids for various applications of unsteady and steady supersonic inviscid flows with strong shock waves. The algorithm is also applied to a multi-level grid adaptation in which the next level finer grid is overlaid on the coarse base grid with an arbitrary orientation.

  2. X-ray grid-detector apparatus

    DOEpatents

    Boone, John M.; Lane, Stephen M.

    1998-01-27

    A hybrid grid-detector apparatus for x-ray systems wherein a microchannel plate structure has an air-interspaced grid portion and a phosphor/optical fluid-filled grid portion. The grids are defined by multiple adjacent channels separated by lead-glass septa. X-rays entering the air-interspaced grid portion at an angle of impingement upon the septa are attenuated, while non-impinging x-rays pass through to the phosphor/fluid filled portion. X-ray energy is converted to luminescent energy in the phosphor/fluid filled portion and the resultant beams of light are directed out of the phosphor/optical fluid filled portion to an imaging device.

  3. An Extensible Information Grid for Risk Management

    NASA Technical Reports Server (NTRS)

    Maluf, David A.; Bell, David G.

    2003-01-01

    This paper describes recent work on developing an extensible information grid for risk management at NASA - a RISK INFORMATION GRID. This grid is being developed by integrating information grid technology with risk management processes for a variety of risk related applications. To date, RISK GRID applications are being developed for three main NASA processes: risk management - a closed-loop iterative process for explicit risk management, program/project management - a proactive process that includes risk management, and mishap management - a feedback loop for learning from historical risks that escaped other processes. This is enabled through an architecture involving an extensible database, structuring information with XML, schemaless mapping of XML, and secure server-mediated communication using standard protocols.

  4. Smart Grid Status and Metrics Report Appendices

    SciTech Connect

    Balducci, Patrick J.; Antonopoulos, Chrissi A.; Clements, Samuel L.; Gorrissen, Willy J.; Kirkham, Harold; Ruiz, Kathleen A.; Smith, David L.; Weimar, Mark R.; Gardner, Chris; Varney, Jeff

    2014-07-01

    A smart grid uses digital power control and communication technology to improve the reliability, security, flexibility, and efficiency of the electric system, from large generation through the delivery systems to electricity consumers and a growing number of distributed generation and storage resources. To convey progress made in achieving the vision of a smart grid, this report uses a set of six characteristics derived from the National Energy Technology Laboratory Modern Grid Strategy. The Smart Grid Status and Metrics Report defines and examines 21 metrics that collectively provide insight into the grid’s capacity to embody these characteristics. This appendix presents papers covering each of the 21 metrics identified in Section 2.1 of the Smart Grid Status and Metrics Report. These metric papers were prepared in advance of the main body of the report and collectively form its informational backbone.

  5. Grid adaptation using chimera composite overlapping meshes

    NASA Technical Reports Server (NTRS)

    Kao, Kai-Hsiung; Liou, Meng-Sing; Chow, Chuen-Yen

    1994-01-01

    The objective of this paper is to perform grid adaptation using composite overlapping meshes in regions of large gradient to accurately capture the salient features during computation. The chimera grid scheme, a multiple overset mesh technique, is used in combination with a Navier-Stokes solver. The numerical solution is first converged to a steady state based on an initial coarse mesh. Solution-adaptive enhancement is then performed by using a secondary fine grid system which oversets on top of the base grid in the high-gradient region, but without requiring the mesh boundaries to join in any special way. Communications through boundary interfaces between those separated grids are carried out using trilinear interpolation. Application to the Euler equations for shock reflections and to shock wave/boundary layer interaction problem are tested. With the present method, the salient features are well-resolved.

  6. Grid adaptation using Chimera composite overlapping meshes

    NASA Technical Reports Server (NTRS)

    Kao, Kai-Hsiung; Liou, Meng-Sing; Chow, Chuen-Yen

    1993-01-01

    The objective of this paper is to perform grid adaptation using composite over-lapping meshes in regions of large gradient to capture the salient features accurately during computation. The Chimera grid scheme, a multiple overset mesh technique, is used in combination with a Navier-Stokes solver. The numerical solution is first converged to a steady state based on an initial coarse mesh. Solution-adaptive enhancement is then performed by using a secondary fine grid system which oversets on top of the base grid in the high-gradient region, but without requiring the mesh boundaries to join in any special way. Communications through boundary interfaces between those separated grids are carried out using tri-linear interpolation. Applications to the Euler equations for shock reflections and to a shock wave/boundary layer interaction problem are tested. With the present method, the salient features are well resolved.

  7. Parallel algorithms for dynamically partitioning unstructured grids

    SciTech Connect

    Diniz, P.; Plimpton, S.; Hendrickson, B.; Leland, R.

    1994-10-01

    Grid partitioning is the method of choice for decomposing a wide variety of computational problems into naturally parallel pieces. In problems where computational load on the grid or the grid itself changes as the simulation progresses, the ability to repartition dynamically and in parallel is attractive for achieving higher performance. We describe three algorithms suitable for parallel dynamic load-balancing which attempt to partition unstructured grids so that computational load is balanced and communication is minimized. The execution time of algorithms and the quality of the partitions they generate are compared to results from serial partitioners for two large grids. The integration of the algorithms into a parallel particle simulation is also briefly discussed.

  8. Security on the US Fusion Grid

    SciTech Connect

    Burruss, Justin R.; Fredian, Tom W.; Thompson, Mary R.

    2005-06-01

    The National Fusion Collaboratory project is developing and deploying new distributed computing and remote collaboration technologies with the goal of advancing magnetic fusion energy research. This work has led to the development of the US Fusion Grid (FusionGrid), a computational grid composed of collaborative, compute, and data resources from the three large US fusion research facilities and with users both in the US and in Europe. Critical to the development of FusionGrid was the creation and deployment of technologies to ensure security in a heterogeneous environment. These solutions to the problems of authentication, authorization, data transfer, and secure data storage, as well as the lessons learned during the development of these solutions, may be applied outside of FusionGrid and scale to future computing infrastructures such as those for next-generation devices like ITER.

  9. Data security on the national fusion grid

    SciTech Connect

    Burruss, Justine R.; Fredian, Tom W.; Thompson, Mary R.

    2005-06-01

    The National Fusion Collaboratory project is developing and deploying new distributed computing and remote collaboration technologies with the goal of advancing magnetic fusion energy research. This work has led to the development of the US Fusion Grid (FusionGrid), a computational grid composed of collaborative, compute, and data resources from the three large US fusion research facilities and with users both in the US and in Europe. Critical to the development of FusionGrid was the creation and deployment of technologies to ensure security in a heterogeneous environment. These solutions to the problems of authentication, authorization, data transfer, and secure data storage, as well as the lessons learned during the development of these solutions, may be applied outside of FusionGrid and scale to future computing infrastructures such as those for next-generation devices like ITER.

  10. A technique for optimizing grid blocks

    NASA Technical Reports Server (NTRS)

    Dannenhoffer, John F., III

    1995-01-01

    A new technique for automatically combining grid blocks of a given block-structured grid into logically-rectangular clusters which are 'optimal' is presented. This technique uses the simulated annealing optimization method to reorganize the blocks into an optimum configuration, that is, one which minimizes a user-defined objective function such as the number of clusters or the differential in the sizes of all the clusters. The clusters which result from applying the technique to two different two-dimensional configurations are presented for a variety of objective function definitions. In all cases, the automatically-generated clusters are significantly better than the original clusters. While this new technique can be applied to block-structured grids generated from any source, it is particularly useful for operating on block-structured grids containing many blocks, such as those produced by the emerging automatic block-structured grid generators.

  11. Towards Verification of Unstructured-Grid Solvers

    NASA Technical Reports Server (NTRS)

    Thomas, James L.; Diskin, Boris; Rumsey, Christopher L.

    2008-01-01

    New methodology for verification of computational methods using unstructured grids is presented. The discretization order properties are studied in computational windows, easily constructed within a collection of grids or a single grid. The windows can be adjusted to isolate the interior discretization, the boundary discretization, or singularities. A major component of the methodology is the downscaling test, introduced previously for studying the convergence rates of truncation and discretization errors of finite-volume discretization schemes on general unstructured grids. Demonstrations of the method are shown, including a comparative accuracy assessment of commonly-used schemes on general mixed grids and the identification of local accuracy deterioration at intersections of tangency and inflow/outflow boundaries. Recommendations for the use of the methodology in large-scale computational simulations are given.

  12. Grid adaption using Chimera composite overlapping meshes

    NASA Technical Reports Server (NTRS)

    Kao, Kai-Hsiung; Liou, Meng-Sing; Chow, Chuen-Yen

    1993-01-01

    The objective of this paper is to perform grid adaptation using composite over-lapping meshes in regions of large gradient to capture the salient features accurately during computation. The Chimera grid scheme, a multiple overset mesh technique, is used in combination with a Navier-Stokes solver. The numerical solution is first converged to a steady state based on an initial coarse mesh. Solution-adaptive enhancement is then performed by using a secondary fine grid system which oversets on top of the base grid in the high-gradient region, but without requiring the mesh boundaries to join in any special way. Communications through boundary interfaces between those separated grids are carried out using tri-linear interpolation. Applications to the Euler equations for shock reflections and to a shock wave/boundary layer interaction problem are tested. With the present method, the salient features are well resolved.

  13. Development of Mitsubishi High Thermal Performance Grid

    NASA Astrophysics Data System (ADS)

    Ikeda, Kazuo; Hoshi, Masaya

    Mitsubishi has developed a new zircalloy grid spacer for PWR fuel with higher thermal performance. Computational Fluid Dynamics (CFD) evaluation method has been applied for designing of the new lower pressure loss and higher Departure from Nucleate Boiling (DNB) benefit grid spacer. Reduction of pressure loss of grid structures has been examined by CFD. Also, CFD has been developed as a design tool to predict the coolant mixing ability of vane structures, which is to compare the relative peak spot temperatures around fuel rods at the same heat flux condition. Prototype grids were manufactured and several tests, which were pressure loss measurements, cross-flow measurements and freon DNB tests, were conducted to verify CFD predictions. It is concluded that the applicability of the CFD evaluation method for the thermal hydraulic design of the grid is confirmed.

  14. Unlocking the potential of the smart grid

    NASA Astrophysics Data System (ADS)

    Konopko, Joanna

    2015-12-01

    The smart grid refers to describe a next-generation electrical power system that is typified by the increased use of Information and Communication Technologies (ICT) in the whole delivery electrical energy process. The generation, delivery and consumption energy, all the steps for power transmission and distribution make the smart grid a complex system. The question is if the amount, diversity, and uses of such data put the smart grid in the category of Big Data applications, followed by the natural question of what is the true value of such data. In this paper an initial answer to this question is provided, the current state of data generation of the Polish grid is analyzed, and a future realistic scenario is illustrated. The analysis shows that the amount of data generated in smart grid is comparable to some of Big Data system examples.

  15. CardioGRID: a framework for the analysis of cardiological signals in GRID computing

    NASA Astrophysics Data System (ADS)

    Francisco Garcia Eijo, Juan; Risk, Marcelo; Prieto Castrillo, Francisco; Suarez Ortega, Cesar; Boton Fernandez, Maria; Pardo Diaz, Alfonso; Rubio del Solar, Manuel; Ramos Pollan, Raul

    2011-09-01

    The present paper describes the development of the CardioGRID framework into the GRID infrastructure. The core GRID services; Workload Management System (WMS), Data Management System and Grid Authentication have been implemented. Additionally, a web-based tool -the CardioGRID portal- has been developed to facilitate the user interaction with the GRID. As a result, the user is able to process the electrocardiogram (ECG) signals obtained form a portable data acquisition device and to process it on the GRID. Once the CardioGRID portal is prompted and the user identity is verified through a digital X.509 certificate, the operator may either upload new raw ECG data to the GRID Storage Elements or use already stored data. Then, subsequent analytics from these data are performed as GRID jobs and relevant medical quantities are derived through middle-ware job retrieval mechanism. In summary in this paper was described the development of a medical GRID based system, and its integration to an existing platform for Digital Repositories Infrastructure.

  16. GridOPTICS(TM): A Design for Plug-and-Play Smart Grid Software Architecture

    SciTech Connect

    Gorton, Ian; Liu, Yan; Yin, Jian

    2012-06-03

    As the smart grid becomes reality, software architectures for integrating legacy systems with new innovative approaches for grid management are needed. These architectures must exhibit flexibility, extensibility, interoperability and scalability. In this position paper, we describe our preliminary work to design such an architecture, known as GridOPTICS, that will enable the deployment and integration of new software tools in smart grid operations. Our preliminary design is based upon use cases from PNNL’s Future Power Grid Initiative, which is a developing a collection of advanced software technologies for smart grid management and control. We describe the motivations for GridOPTICS, and the preliminary design that we are currently prototyping for several distinct use cases.

  17. Doctorate nursing degree in Spain

    PubMed Central

    López-Montesinos, Mª José; Maciá-Soler, Loreto

    2015-01-01

    Analytical and descriptive study of the process of change being experienced in the Spanish university system over the last decade (2005-2014). OBJECTIVE: To describe the structural changes occurring in Nursing Education in Spain, reaching access to doctoral studies from the European Convergence Process and the subsequent legislative development. METHODOLOGY: Bibliographical review of royal decrees and reference literature on the subject of study and descriptive analysis of the situation. RESULTS: Carries various changes suffered in the curricula of nursing education in the last decade, the legislation of the European Higher Education sets the guidelines for current studies of Masters and Doctorates. CONCLUSIONS: The implementation of the Master and Doctorate stages after a basic degree, which is now possible with the new legislation. A formal beginning made of scientific nursing in order to generate their own lines of research led by Doctors of nursing who can integrate in research groups under the same condition as other researcher, yet now, from the nursing discipline itself. PMID:26312628

  18. Solar thermal energy predictability for the grid (STEP4Grid)

    NASA Astrophysics Data System (ADS)

    Fernández-León, Mercedes; Pacheco, Germán; Bolinaga, Beatriz; Campa, Luis; Lara-Fanego, Vicente; Valenzuela, José M.

    2016-05-01

    There is a growing concern about the importance of the improvement of efficiency, the dispatchability of thermosolar plants and the predictability of the energy production for electrical markets. In the current research, a new developed system denominated STEP4Grid is presented and their products are analyzed. Currently it is on operation in the thermosolar plant of Solúcar in Sanlúcar la Mayor, Seville, Spain. Forecasting Direct Normal Irradiance (DNI) and Forecasting Gross Production (FGP) have been provided by the system. This product generates different time horizon forecasts combining all-sky cameras, satellite and Numerical Weather Prediction Model (NWPM) forecasts. The sensors network installed all over the plant provides continuous meteorological and non-meteorological data, which act as an input for the energy production model. The whole system is viewable by plant operators with the help of a layout system. For the May and June of 2015 database, the FGP based on satellite and Numerical Weather Prediction Models (NWPM) DNI predictions have an rMAE for an hour-ahead horizon of 16 % (May) and 17 % (June) respectively. For all the horizons, the FGP increases their deviations the further it is from the real-time and the profile is similar to the evolution of DNI forecasting rMAE.

  19. The 3D Euler solutions using automated Cartesian grid generation

    NASA Technical Reports Server (NTRS)

    Melton, John E.; Enomoto, Francis Y.; Berger, Marsha J.

    1993-01-01

    Viewgraphs on 3-dimensional Euler solutions using automated Cartesian grid generation are presented. Topics covered include: computational fluid dynamics (CFD) and the design cycle; Cartesian grid strategy; structured body fit; grid generation; prolate spheroid; and ONERA M6 wing.

  20. OVERGRID: A Unified Overset Grid Generation Graphical Interface

    NASA Technical Reports Server (NTRS)

    Chan, William M.; Akien, Edwin W. (Technical Monitor)

    1999-01-01

    This paper presents a unified graphical interface and gridding strategy for performing overset grid generation. The interface called OVERGRID has been specifically designed to follow an efficient overset gridding strategy, and contains general grid manipulation capabilities as well as modules that are specifically suited for overset grids. General grid utilities include functions for grid redistribution, smoothing, concatenation, extraction, extrapolation, projection, and many others. Modules specially tailored for overset grids include a seam curve extractor, hyperbolic and algebraic surface grid generators, a hyperbolic volume grid generator, and a Cartesian box grid generator, Grid visualization is achieved using OpenGL while widgets are constructed with Tcl/Tk. The software is portable between various platforms from UNIX workstations to personal computers.

  1. Three-dimensional grid generation about a submarine

    NASA Technical Reports Server (NTRS)

    Abolhassani, Jamshid Samareh; Smith, Robert E.

    1988-01-01

    A systematic multiple-block grid method has been developed to compute grids about submarines. Several topologies are proposed, and an oscillatory transfinite interpolation is used in the grid construction.

  2. Computation of transonic viscous flow past the NTF 65-degree Delta Wing

    NASA Technical Reports Server (NTRS)

    Wu, Chivey

    1993-01-01

    This project is a continuation of the work performed in the summers of 1991 and 1992, during which a 9-block structured grid for the computational domain around each of the four NTF 65-degree Delta Wing models with the sting mount were created. The objective of the project is to validate and supplement the test data on the wing models by computing the viscous flow field about the models.

  3. Scalable Real Time Data Management for Smart Grid

    SciTech Connect

    Yin, Jian; Kulkarni, Anand V.; Purohit, Sumit; Gorton, Ian; Akyol, Bora A.

    2011-12-16

    This paper presents GridMW, a scalable and reliable data middleware for smart grids. Smart grids promise to improve the efficiency of power grid systems and reduce green house emissions through incorporating power generation from renewable sources and shaping demand to match the supply. As a result, power grid systems will become much more dynamic and require constant adjustments, which requires analysis and decision making applications to improve the efficiency and reliability of smart grid systems.

  4. The Complex Case of Positioning the Foundation Degree: Making Sense of a Degree That Is Not a Degree

    ERIC Educational Resources Information Center

    Kadembo, Ernest

    2008-01-01

    The Foundation degree was launched in 2001 and has enjoyed growth but remains a controversial qualification. Foundation Degree Forward, the body charged by the UK government with providing a "national network or expertise to support the development and validation of high-quality Foundation degrees" is championing the marketing of the…

  5. Physics Graduate Degrees: Results from the Enrollments and Degrees & the Degree Recipient Follow-Up Surveys. Focus On

    ERIC Educational Resources Information Center

    Mulvey, Patrick J.; Nicholson, Starr

    2011-01-01

    Each fall the Statistical Research Center conducts its Survey of Enrollments and Degrees, which asks all degree-granting physics and astronomy departments in the US and Puerto Rico to provide information concerning the number of students they have enrolled and counts of recent degree recipients. In the academic year 2007-08 there were 252…

  6. Models for the modern power grid

    NASA Astrophysics Data System (ADS)

    Nardelli, Pedro H. J.; Rubido, Nicolas; Wang, Chengwei; Baptista, Murilo S.; Pomalaza-Raez, Carlos; Cardieri, Paulo; Latva-aho, Matti

    2014-10-01

    This article reviews different kinds of models for the electric power grid that can be used to understand the modern power system, the smart grid. From the physical network to abstract energy markets, we identify in the literature different aspects that co-determine the spatio-temporal multilayer dynamics of power system. We start our review by showing how the generation, transmission and distribution characteristics of the traditional power grids are already subject to complex behaviour appearing as a result of the the interplay between dynamics of the nodes and topology, namely synchronisation and cascade effects. When dealing with smart grids, the system complexity increases even more: on top of the physical network of power lines and controllable sources of electricity, the modernisation brings information networks, renewable intermittent generation, market liberalisation, prosumers, among other aspects. In this case, we forecast a dynamical co-evolution of the smart grid and other kind of networked systems that cannot be understood isolated. This review compiles recent results that model electric power grids as complex systems, going beyond pure technological aspects. From this perspective, we then indicate possible ways to incorporate the diverse co-evolving systems into the smart grid model using, for example, network theory and multi-agent simulation.

  7. A flexible gridding scheme for reservoir simulation

    SciTech Connect

    Verma, S.

    1995-12-31

    This paper describes a new control volume based finite difference scheme for petroleum reservoir simulation which can be used with unstructured grids. The numerical scheme to model fluid flow is shown to be easily used for Voronoi grids in 2D. It can also be used with certain geometrical limitations for 3D Voronoi grids. The scheme can be used without any significant limitations for triangle or tetrahedron based grids where control volumes are constructed around their vertices. It assumes uniform properties inside such control volumes. Full, anisotropic and asymmetric permeability tensor can be easily handled with the proposed method. The permeability tensor can vary from block to block. Thus it will be of great value in modeling fluid flow in reservoirs where principal directions of permeability varies between beds or within a bed. The paper also presents an analysis of some of the published flexible gridding schemes which use a control volume type algebraic approximation and demonstrate the advantages of the method presented here. The technique for grid construction is also discussed. Test results presented here demonstrate the need for proper representation of reservoir geometry to predict the correct flow behavior. The gridding scheme described in this paper achieves that purpose.

  8. Complex Kohn calculations on an overset grid

    NASA Astrophysics Data System (ADS)

    Greenman, Loren; Lucchese, Robert; McCurdy, C. William

    2016-05-01

    An implentation of the overset grid method for complex Kohn scattering calculations is presented, along with static exchange calculations of electron-molecule scattering for small molecules including methane. The overset grid method uses multiple numerical grids, for instance Finite Element Method - Discrete Variable Representation (FEM-DVR) grids, expanded radially around multiple centers (corresponding to the individual atoms in each molecule as well as the center-of-mass of the molecule). The use of this flexible grid allows the complex angular dependence of the wavefunctions near the atomic centers to be well-described, but also allows scattering wavefunctions that oscillate rapidly at large distances to be accurately represented. Additionally, due to the use of multiple grids (and also grid shells), the method is easily parallelizable. The method has been implemented in ePolyscat, a multipurpose suite of programs for general molecular scattering calculations. It is interfaced with a number of quantum chemistry programs (including MolPro, Gaussian, GAMESS, and Columbus), from which it can read molecular orbitals and wavefunctions obtained using standard computational chemistry methods. The preliminary static exchange calculations serve as a test of the applicability.

  9. A Spatially Explicit Degree-day Model of Rift Valley Fever Transmission Risk in the Continental United States

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A degree-day model was used to assess the risk of Rift Valley Fever (RVF) transmission within five target states in the continental United States: California, Minnesota, Nebraska, New York, and Texas. Each state was evaluated on a 10-km grid using the average of historical daily temperature extreme...

  10. Towards a centralized Grid Speedometer

    NASA Astrophysics Data System (ADS)

    Dzhunov, I.; Andreeva, J.; Fajardo, E.; Gutsche, O.; Luyckx, S.; Saiz, P.

    2014-06-01

    Given the distributed nature of the Worldwide LHC Computing Grid and the way CPU resources are pledged and shared around the globe, Virtual Organizations (VOs) face the challenge of monitoring the use of these resources. For CMS and the operation of centralized workflows, the monitoring of how many production jobs are running and pending in the Glidein WMS production pools is very important. The Dashboard Site Status Board (SSB) provides a very flexible framework to collect, aggregate and visualize data. The CMS production monitoring team uses the SSB to define the metrics that have to be monitored and the alarms that have to be raised. During the integration of CMS production monitoring into the SSB, several enhancements to the core functionality of the SSB were required; They were implemented in a generic way, so that other VOs using the SSB can exploit them. Alongside these enhancements, there were a number of changes to the core of the SSB framework. This paper presents the details of the implementation and the advantages for current and future usage of the new features in SSB.

  11. Towards a centralized Grid Speedometer

    SciTech Connect

    Dzhunov, I.; Andreeva, J.; Fajardo, E.; Gutsche, O.; Luyckx, S.; Saiz, P.

    2014-01-01

    Given the distributed nature of the Worldwide LHC Computing Grid and the way CPU resources are pledged and shared around the globe, Virtual Organizations (VOs) face the challenge of monitoring the use of these resources. For CMS and the operation of centralized workflows, the monitoring of how many production jobs are running and pending in the Glidein WMS production pools is very important. The Dashboard Site Status Board (SSB) provides a very flexible framework to collect, aggregate and visualize data. The CMS production monitoring team uses the SSB to define the metrics that have to be monitored and the alarms that have to be raised. During the integration of CMS production monitoring into the SSB, several enhancements to the core functionality of the SSB were required, They were implemented in a generic way, so that other VOs using the SSB can exploit them. Alongside these enhancements, there were a number of changes to the core of the SSB framework. This paper presents the details of the implementation and the advantages for current and future usage of the new features in SSB.

  12. Dugway test grid lidar project

    NASA Astrophysics Data System (ADS)

    Johnson, D. W.; Leonard, D. A.

    1985-05-01

    The primary objective of this project is to design and build a differential absorption lidar (DIAL) system to support field tests involving chemical releases at Dugway Proving Grounds. The design goals are to create a system capable of + or - 10% accuracy measurements of agent or simulant concentrations of 0.1 to 500 mg/sub m. The desired spatial resolution is 2 m (radial, with respect to the chemical release point) and 20 m (azimuthal) with simultaneous temporal resolution of 10 sec or less over the entire plume. In addition, system performance should not be degraded significantly by the presence of dust, munitions by-products, obscurants, and other interferents. The current conceptual design calls for a pair of 100 pulse/sec, 100 mJ/pulse CO2 lasers with computer-controlled frequency agility and scanning capability. The receiving optics have not been precisely specified, but will likely be 30 to 40 cm in diameter. Direct detection and digitization of the returned waveforms at 12-bit accuracy or better is also planned. Soft targets (wire screen in an open frame) are being considered for the test grid.

  13. A grid job monitoring system

    SciTech Connect

    Dumitrescu, Catalin; Nowack, Andreas; Padhi, Sanjay; Sarkar, Subir; /INFN, Pisa /Pisa, Scuola Normale Superiore

    2010-01-01

    This paper presents a web-based Job Monitoring framework for individual Grid sites that allows users to follow in detail their jobs in quasi-real time. The framework consists of several independent components: (a) a set of sensors that run on the site CE and worker nodes and update a database, (b) a simple yet extensible web services framework and (c) an Ajax powered web interface having a look-and-feel and control similar to a desktop application. The monitoring framework supports LSF, Condor and PBS-like batch systems. This is one of the first monitoring systems where an X.509 authenticated web interface can be seamlessly accessed by both end-users and site administrators. While a site administrator has access to all the possible information, a user can only view the jobs for the Virtual Organizations (VO) he/she is a part of. The monitoring framework design supports several possible deployment scenarios. For a site running a supported batch system, the system may be deployed as a whole, or existing site sensors can be adapted and reused with the web services components. A site may even prefer to build the web server independently and choose to use only the Ajax powered web interface. Finally, the system is being used to monitor a glideinWMS instance. This broadens the scope significantly, allowing it to monitor jobs over multiple sites.

  14. Information Metacatalog for a Grid

    NASA Technical Reports Server (NTRS)

    Kolano, Paul

    2007-01-01

    SWIM is a Software Information Metacatalog that gathers detailed information about the software components and packages installed on a grid resource. Information is currently gathered for Executable and Linking Format (ELF) executables and shared libraries, Java classes, shell scripts, and Perl and Python modules. SWIM is built on top of the POUR framework, which is described in the preceding article. SWIM consists of a set of Perl modules for extracting software information from a system, an XML schema defining the format of data that can be added by users, and a POUR XML configuration file that describes how these elements are used to generate periodic, on-demand, and user-specified information. Periodic software information is derived mainly from the package managers used on each system. SWIM collects information from native package managers in FreeBSD, Solaris, and IRX as well as the RPM, Perl, and Python package managers on multiple platforms. Because not all software is available, or installed in package form, SWIM also crawls the set of relevant paths from the File System Hierarchy Standard that defines the standard file system structure used by all major UNIX distributions. Using these two techniques, the vast majority of software installed on a system can be located. SWIM computes the same information gathered by the periodic routines for specific files on specific hosts, and locates software on a system given only its name and type.

  15. Multilevel elliptic smoothing of large three-dimensional grids

    NASA Technical Reports Server (NTRS)

    Mastin, C. Wayne

    1995-01-01

    Elliptic grid generation methods have been used for many years to smooth and improve grids generated by algebraic interpolation schemes. However, the elliptic system that must be solved is nonlinear and convergence is generally very slow for large grids. In an attempt to make elliptic methods practical for large three-dimensional grids, a two-stage implementation is developed where the overall grid point locations are set using a coarse grid generated by the elliptic system. The coarse grid is then interpolated to generate a finer grid which is smoothed using only a few iterations of the elliptic system.

  16. A roadmap for caGrid, an enterprise Grid architecture for biomedical research.

    PubMed

    Saltz, Joel; Hastings, Shannon; Langella, Stephen; Oster, Scott; Kurc, Tahsin; Payne, Philip; Ferreira, Renato; Plale, Beth; Goble, Carole; Ervin, David; Sharma, Ashish; Pan, Tony; Permar, Justin; Brezany, Peter; Siebenlist, Frank; Madduri, Ravi; Foster, Ian; Shanbhag, Krishnakant; Mead, Charlie; Chue Hong, Neil

    2008-01-01

    caGrid is a middleware system which combines the Grid computing, the service oriented architecture, and the model driven architecture paradigms to support development of interoperable data and analytical resources and federation of such resources in a Grid environment. The functionality provided by caGrid is an essential and integral component of the cancer Biomedical Informatics Grid (caBIG) program. This program is established by the National Cancer Institute as a nationwide effort to develop enabling informatics technologies for collaborative, multi-institutional biomedical research with the overarching goal of accelerating translational cancer research. Although the main application domain for caGrid is cancer research, the infrastructure provides a generic framework that can be employed in other biomedical research and healthcare domains. The development of caGrid is an ongoing effort, adding new functionality and improvements based on feedback and use cases from the community. This paper provides an overview of potential future architecture and tooling directions and areas of improvement for caGrid and caGrid-like systems. This summary is based on discussions at a roadmap workshop held in February with participants from biomedical research, Grid computing, and high performance computing communities. PMID:18560123

  17. A Roadmap for caGrid, an Enterprise Grid Architecture for Biomedical Research

    PubMed Central

    Saltz, Joel; Hastings, Shannon; Langella, Stephen; Oster, Scott; Kurc, Tahsin; Payne, Philip; Ferreira, Renato; Plale, Beth; Goble, Carole; Ervin, David; Sharma, Ashish; Pan, Tony; Permar, Justin; Brezany, Peter; Siebenlist, Frank; Madduri, Ravi; Foster, Ian; Shanbhag, Krishnakant; Mead, Charlie; Hong, Neil Chue

    2012-01-01

    caGrid is a middleware system which combines the Grid computing, the service oriented architecture, and the model driven architecture paradigms to support development of interoperable data and analytical resources and federation of such resources in a Grid environment. The functionality provided by caGrid is an essential and integral component of the cancer Biomedical Informatics Grid (caBIG™) program. This program is established by the National Cancer Institute as a nationwide effort to develop enabling informatics technologies for collaborative, multi-institutional biomedical research with the overarching goal of accelerating translational cancer research. Although the main application domain for caGrid is cancer research, the infrastructure provides a generic framework that can be employed in other biomedical research and healthcare domains. The development of caGrid is an ongoing effort, adding new functionality and improvements based on feedback and use cases from the community. This paper provides an overview of potential future architecture and tooling directions and areas of improvement for caGrid and caGrid-like systems. This summary is based on discussions at a roadmap workshop held in February with participants from biomedical research, Grid computing, and high performance computing communities. PMID:18560123

  18. A Unified Overset Grid Generation Graphical Interface and New Concepts on Automatic Gridding Around Surface Discontinuities

    NASA Technical Reports Server (NTRS)

    Chan, William M.; Akien, Edwin (Technical Monitor)

    2002-01-01

    For many years, generation of overset grids for complex configurations has required the use of a number of different independently developed software utilities. Results created by each step were then visualized using a separate visualization tool before moving on to the next. A new software tool called OVERGRID was developed which allows the user to perform all the grid generation steps and visualization under one environment. OVERGRID provides grid diagnostic functions such as surface tangent and normal checks as well as grid manipulation functions such as extraction, extrapolation, concatenation, redistribution, smoothing, and projection. Moreover, it also contains hyperbolic surface and volume grid generation modules that are specifically suited for overset grid generation. It is the first time that such a unified interface existed for the creation of overset grids for complex geometries. New concepts on automatic overset surface grid generation around surface discontinuities will also be briefly presented. Special control curves on the surface such as intersection curves, sharp edges, open boundaries, are called seam curves. The seam curves are first automatically extracted from a multiple panel network description of the surface. Points where three or more seam curves meet are automatically identified and are called seam corners. Seam corner surface grids are automatically generated using a singular axis topology. Hyperbolic surface grids are then grown from the seam curves that are automatically trimmed away from the seam corners.

  19. Bus.py: A GridLAB-D Communication Interface for Smart Distribution Grid Simulations

    SciTech Connect

    Hansen, Timothy M.; Palmintier, Bryan; Suryanarayanan, Siddharth; Maciejewski, Anthony A.; Siegel, Howard Jay

    2015-07-03

    As more Smart Grid technologies (e.g., distributed photovoltaic, spatially distributed electric vehicle charging) are integrated into distribution grids, static distribution simulations are no longer sufficient for performing modeling and analysis. GridLAB-D is an agent-based distribution system simulation environment that allows fine-grained end-user models, including geospatial and network topology detail. A problem exists in that, without outside intervention, once the GridLAB-D simulation begins execution, it will run to completion without allowing the real-time interaction of Smart Grid controls, such as home energy management systems and aggregator control. We address this lack of runtime interaction by designing a flexible communication interface, Bus.py (pronounced bus-dot-pie), that uses Python to pass messages between one or more GridLAB-D instances and a Smart Grid simulator. This work describes the design and implementation of Bus.py, discusses its usefulness in terms of some Smart Grid scenarios, and provides an example of an aggregator-based residential demand response system interacting with GridLAB-D through Bus.py. The small scale example demonstrates the validity of the interface and shows that an aggregator using said interface is able to control residential loads in GridLAB-D during runtime to cause a reduction in the peak load on the distribution system in (a) peak reduction and (b) time-of-use pricing cases.

  20. Sources and Information on Transfer Associate Degrees

    ERIC Educational Resources Information Center

    Ayon, Carlos

    2012-01-01

    This chapter provides an annotated bibliography of articles about the effects of transfer associate degrees and related statewide transfer and articulation policies. It also provides links to transfer degree legislation in several states.

  1. 45 CFR 2400.41 - Degree programs.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... degree in history or political science (including government or politics), the degree of Master of Arts in Teaching in history or political science (including government or politics), or a related...

  2. 45 CFR 2400.41 - Degree programs.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... degree in history or political science (including government or politics), the degree of Master of Arts in Teaching in history or political science (including government or politics), or a related...

  3. 45 CFR 2400.41 - Degree programs.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... degree in history or political science (including government or politics), the degree of Master of Arts in Teaching in history or political science (including government or politics), or a related...

  4. 45 CFR 2400.41 - Degree programs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... degree in history or political science (including government or politics), the degree of Master of Arts in Teaching in history or political science (including government or politics), or a related...

  5. 45 CFR 2400.41 - Degree programs.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... degree in history or political science (including government or politics), the degree of Master of Arts in Teaching in history or political science (including government or politics), or a related...

  6. Multiblock grid generation with automatic zoning

    NASA Technical Reports Server (NTRS)

    Eiseman, Peter R.

    1995-01-01

    An overview will be given for multiblock grid generation with automatic zoning. We shall explore the many advantages and benefits of this exciting technology and will also see how to apply it to a number of interesting cases. The technology is available in the form of a commercial code, GridPro(registered trademark)/az3000. This code takes surface geometry definitions and patterns of points as its primary input and produces high quality grids as its output. Before we embark upon our exploration, we shall first give a brief background of the environment in which this technology fits.

  7. On automating domain connectivity for overset grids

    NASA Technical Reports Server (NTRS)

    Chiu, Ing-Tsau

    1994-01-01

    An alternative method for domain connectivity among systems of overset grids is presented. Reference uniform Cartesian systems of points are used to achieve highly efficient domain connectivity, and form the basis for a future fully automated system. The Cartesian systems are used to approximated body surfaces and to map the computational space of component grids. By exploiting the characteristics of Cartesian Systems, Chimera type hole-cutting and identification of donor elements for intergrid boundary points can be carried out very efficiently. The method is tested for a range of geometrically complex multiple-body overset grid systems.

  8. Unstructured grid methods for compressible flows

    NASA Technical Reports Server (NTRS)

    Morgan, K.; Peraire, J.; Peiro, J.

    1992-01-01

    The implementation of the finite element method on unstructured triangular grids is described and the development of centered finite element schemes for the solution of the compressible Euler equation on general triangular and tetrahedral grids is discussed. Explicit and implicit Lax-Wendroff type methods and a method based upon the use of explicit multistep timestepping are considered. In the latter case, the convergence behavior of the method is accelerated by the incorporation of a fully unstructured multigrid procedure. The advancing front method for generating unstructured grids of triangles and tetrahedra is described and the application of adaptive mesh techniques to both steady and transient flow analysis is illustrated.

  9. Cloud feedback studies with a physics grid

    SciTech Connect

    Dipankar, Anurag; Stevens, Bjorn

    2013-02-07

    During this project the investigators implemented a fully parallel version of dual-grid approach in main frame code ICON, implemented a fully conservative first-order interpolation scheme for horizontal remapping, integrated UCLA-LES micro-scale model into ICON to run parallely in selected columns, and did cloud feedback studies on aqua-planet setup to evaluate the classical parameterization on a small domain. The micro-scale model may be run in parallel with the classical parameterization, or it may be run on a "physics grid" independent of the dynamics grid.

  10. Interoperable PKI Data Distribution in Computational Grids

    SciTech Connect

    Pala, Massimiliano; Cholia, Shreyas; Rea, Scott A.; Smith, Sean W.

    2008-07-25

    One of the most successful working examples of virtual organizations, computational grids need authentication mechanisms that inter-operate across domain boundaries. Public Key Infrastructures(PKIs) provide sufficient flexibility to allow resource managers to securely grant access to their systems in such distributed environments. However, as PKIs grow and services are added to enhance both security and usability, users and applications must struggle to discover available resources-particularly when the Certification Authority (CA) is alien to the relying party. This article presents how to overcome these limitations of the current grid authentication model by integrating the PKI Resource Query Protocol (PRQP) into the Grid Security Infrastructure (GSI).

  11. Adaptive refinement tools for tetrahedral unstructured grids

    NASA Technical Reports Server (NTRS)

    Pao, S. Paul (Inventor); Abdol-Hamid, Khaled S. (Inventor)

    2011-01-01

    An exemplary embodiment providing one or more improvements includes software which is robust, efficient, and has a very fast run time for user directed grid enrichment and flow solution adaptive grid refinement. All user selectable options (e.g., the choice of functions, the choice of thresholds, etc.), other than a pre-marked cell list, can be entered on the command line. The ease of application is an asset for flow physics research and preliminary design CFD analysis where fast grid modification is often needed to deal with unanticipated development of flow details.

  12. Information Power Grid (IPG) Tutorial 2003

    NASA Technical Reports Server (NTRS)

    Meyers, George

    2003-01-01

    For NASA and the general community today Grid middleware: a) provides tools to access/use data sources (databases, instruments, ...); b) provides tools to access computing (unique and generic); c) Is an enabler of large scale collaboration. Dynamically responding to needs is a key selling point of a grid. Independent resources can be joined as appropriate to solve a problem. Provide tools to enable the building of a frameworks for application. Provide value added service to the NASA user base for utilizing resources on the grid in new and more efficient ways. Provides tools for development of Frameworks.

  13. CFD Process Automation Using Overset Grids

    NASA Technical Reports Server (NTRS)

    Buning, Pieter G.; George, Michael W. (Technical Monitor)

    1995-01-01

    This talk summarizes three applications of the overset grid method for CFD using some level of automated grid generation, flow solution and post-processing. These applications are 2D high-lift airfoil analysis (INS2D code), turbomachinery applications (ROTOR2/3 codes), and subsonic transport wing/body configurations (OVERFLOW code). These examples provide a forum for discussing the advantages and disadvantages of overset gridding for use in an automated CFD process. The goals and benefits of the automation incorporated in each application will be described, as well as the shortcomings of the approaches.

  14. Introduction to grid generation systems in turbomachinery

    NASA Astrophysics Data System (ADS)

    Camarero, R.; Ozell, B.; Reggio, M.; Caron, A.

    Body-fitted curvilinear grid generation for the numerical simulation of three dimensional flow in turbomachines is introduced. The grids yield coordinate curves aligned with the domain boundaries. The numerical scheme for the governing equations is carried out on a rectangular mesh, giving a simpler and more accurate algorithm since bondaries coincide with coordinate grids, and no interpolation is required. The geometric complexity, through the transformation, is imbedded into the coefficients of the governing equations, affording the possibility of writing generalized codes applicable to a variety of geometries. This results in a great saving in the code development effort.

  15. caGrid 1.0: An Enterprise Grid Infrastructure for Biomedical Research

    PubMed Central

    Oster, Scott; Langella, Stephen; Hastings, Shannon; Ervin, David; Madduri, Ravi; Phillips, Joshua; Kurc, Tahsin; Siebenlist, Frank; Covitz, Peter; Shanbhag, Krishnakant; Foster, Ian; Saltz, Joel

    2008-01-01

    Objective To develop software infrastructure that will provide support for discovery, characterization, integrated access, and management of diverse and disparate collections of information sources, analysis methods, and applications in biomedical research. Design An enterprise Grid software infrastructure, called caGrid version 1.0 (caGrid 1.0), has been developed as the core Grid architecture of the NCI-sponsored cancer Biomedical Informatics Grid (caBIG™) program. It is designed to support a wide range of use cases in basic, translational, and clinical research, including 1) discovery, 2) integrated and large-scale data analysis, and 3) coordinated study. Measurements The caGrid is built as a Grid software infrastructure and leverages Grid computing technologies and the Web Services Resource Framework standards. It provides a set of core services, toolkits for the development and deployment of new community provided services, and application programming interfaces for building client applications. Results The caGrid 1.0 was released to the caBIG community in December 2006. It is built on open source components and caGrid source code is publicly and freely available under a liberal open source license. The core software, associated tools, and documentation can be downloaded from the following URL: https://cabig.nci.nih.gov/workspaces/Architecture/caGrid. Conclusions While caGrid 1.0 is designed to address use cases in cancer research, the requirements associated with discovery, analysis and integration of large scale data, and coordinated studies are common in other biomedical fields. In this respect, caGrid 1.0 is the realization of a framework that can benefit the entire biomedical community. PMID:18096909

  16. First Professional Degree Awards to Women.

    ERIC Educational Resources Information Center

    Brown, George H.

    Changes in the percentage representation of women among recipients of first professional degrees are examined between the academic years 1970-71 and 1975-76. The data were collected through the annual Survey of Degrees and Other Formal Awards Conferred. A first professional degree is one that "signifies completion of the academic requirements for…

  17. The Top 100 Bachelor's Degree Conferred

    ERIC Educational Resources Information Center

    Borden, Victor M. H.

    2010-01-01

    Each year in the Top 100 series, researchers highlight the institutions that confer the most degrees to students of color. In this edition, they focus on the most prevalent degree conferred: the bachelor's degree. Among the types of colleges and universities that they examine--those that have Title IV status (recognized by the U.S. Department of…

  18. The Top 100: Graduate Degrees Conferred

    ERIC Educational Resources Information Center

    Borden, Victor M. H.

    2010-01-01

    To advance to the highest level of most professional and technical careers, an individual needs more than a bachelor's degree. The post-baccalaureate degrees recognized in this edition of "Diverse"--master's, doctoral and first professional degrees--are more than just tickets to better-paying jobs. They provide the skills and credentials needed…

  19. How Adult Online Graduates Portray Their Degree

    ERIC Educational Resources Information Center

    Hagan, Eric J.

    2013-01-01

    This qualitative case study investigated how adult graduates of online Bachelor's degree programs describe the online aspect of their degree. Online education is promoted as a method for adult students to access the benefits of a college degree. Therefore, it is important for prospective online students, higher education institutions and…

  20. Profile of the Nontraditional Doctoral Degree Student

    ERIC Educational Resources Information Center

    Offerman, Michael

    2011-01-01

    What type of individual pursues a nontraditional doctoral degree? Although answering this question is the main purpose of this chapter, there is an underlying story that provides context for how and why these individuals came to pursue a doctoral degree. The tremendous growth in the number of doctoral students and doctoral degree-granting…

  1. A User Guide to 360 Degree Feedback.

    ERIC Educational Resources Information Center

    Lassiter, David

    1996-01-01

    Describes 360-degree feedback that provides performance data from multiple points of reference. Topics include reasons for performance improvement; what needs improvement; how to improve; choosing a reliable 360-degree instrument; and applications of 360-degree feedback, including personal development, team development, change, and needs…

  2. Engineering and Technology Degrees, 1972-73

    ERIC Educational Resources Information Center

    Alden, John D.

    1974-01-01

    Presents the 1972-73 degree statistics broken down by curriculum and degree for four levels of engineering and four of technology programs. Included are a summary of degree statistics science 1949 and a list of United States engineering schools with the number of graduates and the control and accreditation status reported. (CC)

  3. Adaptive EAGLE dynamic solution adaptation and grid quality enhancement

    NASA Technical Reports Server (NTRS)

    Luong, Phu Vinh; Thompson, J. F.; Gatlin, B.; Mastin, C. W.; Kim, H. J.

    1992-01-01

    In the effort described here, the elliptic grid generation procedure in the EAGLE grid code was separated from the main code into a subroutine, and a new subroutine which evaluates several grid quality measures at each grid point was added. The elliptic grid routine can now be called, either by a computational fluid dynamics (CFD) code to generate a new adaptive grid based on flow variables and quality measures through multiple adaptation, or by the EAGLE main code to generate a grid based on quality measure variables through static adaptation. Arrays of flow variables can be read into the EAGLE grid code for use in static adaptation as well. These major changes in the EAGLE adaptive grid system make it easier to convert any CFD code that operates on a block-structured grid (or single-block grid) into a multiple adaptive code.

  4. PNNL Future Power Grid Initiative-developed GridOPTICS Software System (GOSS)

    SciTech Connect

    2014-11-03

    The power grid is changing and evolving. One aspect of this change is the growing use of smart meters and other devices, which are producing large volumes of useful data. However, in many cases, the data can’t be translated quickly into actionable guidance to improve grid performance. There's a need for innovative tools. The GridOPTICS(TM) Software System, or GOSS, developed through PNNL's Future Power Grid Initiative, is open source and became publicly available in spring 2014. The value of this middleware is that it easily integrates grid applications with sources of data and facilitates communication between them. Such a capability provides a foundation for developing a range of applications to improve grid management.

  5. Quantifying the Impact of Adverse Events on the Electricity Grid as a Function of Grid Topology

    SciTech Connect

    Coles, Garill A.; Sadovsky, Artyom; Du, Pengwei

    2011-11-30

    Abstract--Traditional approaches to the study of grid vulnerability have taken an asset based approach, which seeks to identify those assets most likely to result in grid-wide failures or disruptions in the event that they are compromised. We propose an alternative approach to the study of grid vulnerability, one based on the topological structure of the entire grid. We propose a method that will identify topological parameters most closely related to the ability of the grid to withstand an adverse event. We compare these topological parameters in terms of their impact on the vulnerability metric we have defined, referred to as the grid’s “survivability”. Our approach is motivated by Paul Baran’s work on communications networks, which also studied vulnerability in terms of network-wide parameters. Our approach is useful both as a planning model for evaluating proposed changes to a grid and as a risk assessment tool.

  6. Multigrid on unstructured grids using an auxiliary set of structured grids

    SciTech Connect

    Douglas, C.C.; Malhotra, S.; Schultz, M.H.

    1996-12-31

    Unstructured grids do not have a convenient and natural multigrid framework for actually computing and maintaining a high floating point rate on standard computers. In fact, just the coarsening process is expensive for many applications. Since unstructured grids play a vital role in many scientific computing applications, many modifications have been proposed to solve this problem. One suggested solution is to map the original unstructured grid onto a structured grid. This can be used as a fine grid in a standard multigrid algorithm to precondition the original problem on the unstructured grid. We show that unless extreme care is taken, this mapping can lead to a system with a high condition number which eliminates the usefulness of the multigrid method. Theorems with lower and upper bounds are provided. Simple examples show that the upper bounds are sharp.

  7. Tube support grid and spacer therefor

    DOEpatents

    Ringsmuth, Richard J.; Kaufman, Jay S.

    1986-01-01

    A tube support grid and spacers therefor provide radially inward preloading of heat exchange tubes to minimize stress upon base welds due to differential thermal expansion. The grid comprises a concentric series of rings and spacers with opposing concave sides for conforming to the tubes and V-shaped ends to provide resilient flexibility. The flexibility aids in assembly and in transmitting seismic vibrations from the tubes to a shroud. The tube support grid may be assembled in place to achieve the desired inwardly radial preloading of the heat exchange tubes. Tab and slot assembly further minimizes stresses in the system. The radii of the grid rings may be preselected to effect the desired radially inward preloading.

  8. IEEE 1547 Standards Advancing Grid Modernization

    SciTech Connect

    Basso, Thomas; Chakraborty, Sudipta; Hoke, Andy; Coddington, Michael

    2015-06-14

    Technology advances including development of advanced distributed energy resources (DER) and grid-integrated operations and controls functionalities have surpassed the requirements in current standards and codes for DER interconnection with the distribution grid. The full revision of IEEE Standards 1547 (requirements for DER-grid interconnection and interoperability) and 1547.1 (test procedures for conformance to 1547) are establishing requirements and best practices for state-of-the-art DER including variable renewable energy sources. The revised standards will also address challenges associated with interoperability and transmission-level effects, in addition to strictly addressing the distribution grid needs. This paper provides the status and future direction of the ongoing development focus for the 1547 standards.

  9. NURBS evaluation and utilization for grid generation

    SciTech Connect

    Yu, Tzu-Yi; Soni, B.K.

    1996-12-31

    In the last few years, Non-Uniform Rational BSpline (NURBS) has evolved as an essential tool for a semi-analytical representation of geometrical entities encountered in Computational Field Simulation (CFS). The grid generation techniques based on NURBS have been developed and reported in the literature by various researchers. However, the evaluation of NURBS for surface/volume grid point generation is time consuming and the representation of widely utilized aerodynamic shapes into NURBS is not trivial. This paper addressed these issues. An enhanced algorithm for NURBS evaluation based on the proper utilization of the basis functions is presented. An accurate representation of the widely utilized transition duct designed by using superellipse equation is developed. An example of the NURBS surface definition to a 3D volume and its utilization in grid adaptation by combing NURBS with elliptic generation system is presented. The computational example involving a flow field around a generic missile configuration is presented for demonstrating grid adaptation.

  10. In Search of Grid Converged Solutions

    NASA Technical Reports Server (NTRS)

    Lockard, David P.

    2010-01-01

    Assessing solution error continues to be a formidable task when numerically solving practical flow problems. Currently, grid refinement is the primary method used for error assessment. The minimum grid spacing requirements to achieve design order accuracy for a structured-grid scheme are determined for several simple examples using truncation error evaluations on a sequence of meshes. For certain methods and classes of problems, obtaining design order may not be sufficient to guarantee low error. Furthermore, some schemes can require much finer meshes to obtain design order than would be needed to reduce the error to acceptable levels. Results are then presented from realistic problems that further demonstrate the challenges associated with using grid refinement studies to assess solution accuracy.

  11. Emerging trends: grid technology in pathology.

    PubMed

    Bueno, Gloria; García-Rojo, Marcial; Déniz, Oscar; Fernández-Carrobles, María del Milagro; Vállez, Noelia; Salido, Jesús; García-González, Jesús

    2012-01-01

    Grid technology has enabled clustering and access to, and interaction among, a wide variety of geographically distributed resources such as supercomputers, storage systems, data sources, instruments as well as special devices and services, realizing network-centric operations. Their main applications include large scale computational and data intensive problems in science and engineering. Grids are likely to have a deep impact on health related applications. Moreover, they seem to be suitable for tissue-based diagnosis. They offer a powerful tool to deal with current challenges in many biomedical domains involving complex anatomical and physiological modeling of structures from images or large image databases assembling and analysis. This chapter analyzes the general structures and functions of a Grid environment implemented for tissue-based diagnosis on digital images. Moreover, it presents a Grid middleware implemented by the authors for diagnostic pathology applications. The chapter is a review of the work done as part of the European COST project EUROTELEPATH. PMID:22925801

  12. Turbulence decay downstream of an active grid

    NASA Astrophysics Data System (ADS)

    Bewley, Gregory; Bodenschatz, Eberhard

    2015-11-01

    A grid in a wind tunnel stirs up turbulence that has a certain large-scale structure. The moving parts in a so-called ``active grid'' can be programmed to produce different structures. We use a special active grid in which each of 129 paddles on the grid has its own position-controlled servomotor that can move independently of the others. We observe among other things that the anisotropy in the amplitude of the velocity fluctuations and in the correlation lengths can be set and varied with an algorithm that oscillates the paddles in a specified way. The variation in the anisotropies that we observe can be explained by our earlier analysis of anisotropic ``soccer ball'' turbulence (Bewley, Chang and Bodenschatz 2012, Phys. Fluids). We define the influence of this variation in structure on the downstream evolution of the turbulence. with Eberhard Bodenschatz and others.

  13. Rigel: An interactive structured grid generation system

    SciTech Connect

    Hachfeld, W.D.; Khamayseh, A.K.; Hansen, G.A.

    1998-02-01

    An interactive structured grid generation application that facilitates the construction of complex, discretized, simulation models directly from the original CAD geometry specifications is presented. The application, named Rigel, reads physical model descriptions generated by modern CAD packages. Rigel includes a suite of interactive geometry editing functions to assist the user in the construction of a topologically correct geometry from the original CAD specification. Once a topologically correct geometry is created, an interactively steered grid generation capability is provided to facilitate the construction of an appropriate discretization for the simulation. Grid quality enhancement is supported with the application of user-directed elliptic smoothing, refinement, and coarsening operators. After a grid is completed, various output filters are supplied to write an input file for the target simulation code. This paper is intended to provide an overview of the mechanics of this process and to highlight some of the novel algorithms and techniques employed.

  14. Bion's grid: a tool for transformation.

    PubMed

    Charles, Marilyn

    2002-01-01

    The author explicates the principles underlying Bion's "Grid" in a way that makes them useful for the clinician. The grid represents an attempt to provide a tool by which we might better understand the abstract rules and principles that facilitate understanding in the analytic process. Bion believed that content often obscures meaning unless we can move beyond the ostensible meaning in our attempts to understand the complexity of a statement and the uses to which it is being put. For Bion, the grid itself was not so important as the attempt to increase one's powers of observation, intuition, interpretation, and transformation. A clinical illustration is provided in which the grid provides a useful means for facilitating these endeavours. PMID:12389516

  15. Voltage collapse in complex power grids

    PubMed Central

    Simpson-Porco, John W.; Dörfler, Florian; Bullo, Francesco

    2016-01-01

    A large-scale power grid's ability to transfer energy from producers to consumers is constrained by both the network structure and the nonlinear physics of power flow. Violations of these constraints have been observed to result in voltage collapse blackouts, where nodal voltages slowly decline before precipitously falling. However, methods to test for voltage collapse are dominantly simulation-based, offering little theoretical insight into how grid structure influences stability margins. For a simplified power flow model, here we derive a closed-form condition under which a power network is safe from voltage collapse. The condition combines the complex structure of the network with the reactive power demands of loads to produce a node-by-node measure of grid stress, a prediction of the largest nodal voltage deviation, and an estimate of the distance to collapse. We extensively test our predictions on large-scale systems, highlighting how our condition can be leveraged to increase grid stability margins. PMID:26887284

  16. Computational Aerothermodynamic Simulation Issues on Unstructured Grids

    NASA Technical Reports Server (NTRS)

    Gnoffo, Peter A.; White, Jeffery A.

    2004-01-01

    The synthesis of physical models for gas chemistry and turbulence from the structured grid codes LAURA and VULCAN into the unstructured grid code FUN3D is described. A directionally Symmetric, Total Variation Diminishing (STVD) algorithm and an entropy fix (eigenvalue limiter) keyed to local cell Reynolds number are introduced to improve solution quality for hypersonic aeroheating applications. A simple grid-adaptation procedure is incorporated within the flow solver. Simulations of flow over an ellipsoid (perfect gas, inviscid), Shuttle Orbiter (viscous, chemical nonequilibrium) and comparisons to the structured grid solvers LAURA (cylinder, Shuttle Orbiter) and VULCAN (flat plate) are presented to show current capabilities. The quality of heating in 3D stagnation regions is very sensitive to algorithm options in general, high aspect ratio tetrahedral elements complicate the simulation of high Reynolds number, viscous flow as compared to locally structured meshes aligned with the flow.

  17. HEP Data Grid Applications in Korea

    NASA Astrophysics Data System (ADS)

    Cho, Kihyeon; Oh, Youngdo; Son, Dongchul; Kim, Bockjoo; Lee, Sangsan

    2003-04-01

    We will introduce the national HEP Data Grid applications in Korea. Through a five-year HEP Data Grid project (2002-2006) for CMS, AMS, CDF, PHENIX, K2K and Belle experiments in Korea, the Center for High Energy Physics, Kyungpook National University in Korea will construct the 1,000 PC cluster and related storage system such as 1,200 TByte Raid disk system. This project includes one of the master plan to construct Asia Regional Data Center by 2006 for the CMS and AMS Experiments and DCAF(DeCentralized Analysis Farm) for the CDF Experiments. During the first year of the project, we have constructed a cluster of around 200 CPU's with a 50 TBytes of a storage system. We will present our first year's experience of the software and hardware applications for HEP Data Grid of EDG and SAM Grid testbeds.

  18. Spontaneous synchrony in power-grid networks

    NASA Astrophysics Data System (ADS)

    Motter, Adilson E.; Myers, Seth A.; Anghel, Marian; Nishikawa, Takashi

    2013-03-01

    An imperative condition for the functioning of a power-grid network is that its power generators remain synchronized. Disturbances can prompt desynchronization, which is a process that has been involved in large power outages. Here we derive a condition under which the desired synchronous state of a power grid is stable, and use this condition to identify tunable parameters of the generators that are determinants of spontaneous synchronization. Our analysis gives rise to an approach to specify parameter assignments that can enhance synchronization of any given network, which we demonstrate for a selection of both test systems and real power grids. These findings may be used to optimize stability and help devise new control schemes, thus offering an additional layer of protection and contributing to the development of smart grids that can recover from failures in real time.

  19. A Detailed Examination of the GPM Core Satellite Gridded Text Product

    NASA Technical Reports Server (NTRS)

    Stocker, Erich Franz; Kelley, Owen A.; Kummerow, C.; Huffman, George; Olson, William S.; Kwiatowski, John M.

    2015-01-01

    The Global Precipitation Measurement (GPM) mission quarter-degree gridded-text product has a similar file format and a similar purpose as the Tropical Rainfall Measuring Mission (TRMM) 3G68 quarter-degree product. The GPM text-grid format is an hourly summary of surface precipitation retrievals from various GPM instruments and combinations of GPM instruments. The GMI Goddard Profiling (GPROF) retrieval provides the widest swath (800 km) and does the retrieval using the GPM Microwave Imager (GMI). The Ku radar provides the widest radar swath (250 km swath) and also provides continuity with the TRMM Ku Precipitation Radar. GPM's Ku+Ka band matched swath (125 km swath) provides a dual-frequency precipitation retrieval. The "combined" retrieval (125 km swath) provides a multi-instrument precipitation retrieval based on the GMI, the DPR Ku radar, and the DPR Ka radar. While the data are reported in hourly grids, all hours for a day are packaged into a single text file that is g-zipped to reduce file size and to speed up downloading. The data are reported on a 0.25deg x 0.25 deg grid.

  20. A perspective on unstructured grid flow solvers

    NASA Technical Reports Server (NTRS)

    Venkatakrishnan, V.

    1995-01-01

    This survey paper assesses the status of compressible Euler and Navier-Stokes solvers on unstructured grids. Different spatial and temporal discretization options for steady and unsteady flows are discussed. The integration of these components into an overall framework to solve practical problems is addressed. Issues such as grid adaptation, higher order methods, hybrid discretizations and parallel computing are briefly discussed. Finally, some outstanding issues and future research directions are presented.

  1. Computer Program For Generation Of Surface Grids

    NASA Technical Reports Server (NTRS)

    Ching, Raymond; Pierce, Lawrence

    1993-01-01

    S3D is useful computer program for generation of grids on surfaces of bodies having complicated shapes. Product of integration of robust and widely applicable interpolation technique with latest in computer-workstation technology. Incorporates highly efficient and easy-to-use graphical-interface software, enables real-time and interactive analyses of surface-geometry data and facilitates construction of surface grids.

  2. Interlocking egg-crate type grid assembly

    DOEpatents

    Kast, S.J.

    1985-03-15

    Disclosed is an interlocking egg-crate hexagonal grid for supporting a nuclear fuel pin in a hexagonal array. The grid is formed from strips bent at an angle of about 120/sup 0/ at each vertex. Over some faces of each hexagonal cell the strips are coplanar but are arranged, by stacking interlocking, to avoid any double thickness of metal in that plane. Springs and dimples are formed in the faces of each cell to hold the fuel pin substantially centered.

  3. Aspects and applications of patched grid calculations

    NASA Technical Reports Server (NTRS)

    Walters, Robert W.; Switzer, George F.; Thomas, James L.

    1991-01-01

    Patched grid calculations within the framework of an implicit, flux vector split upwind/relaxation algorithm for the Euler equations are presented. Aspects of computing on patched grids are discussed including the effect of a metric-discontinuous interface on the convergence rate of the algorithm, and the effect of curvature along an interface. Applications to a converging-diverging nozzle including effects of choking and bypass slots in two dimensions are presented.

  4. Application of the Shockley-Ramo theorem on the grid inefficiency of Frisch grid ionization chambers

    NASA Astrophysics Data System (ADS)

    Göök, A.; Hambsch, F.-J.; Oberstedt, A.; Oberstedt, S.

    2012-02-01

    The concept of grid inefficiency in Frisch grid ionization chambers and its influence on the anode pulse shape is explained in terms of the Shockley-Ramo theorem for induced charges. The grid inefficiency correction is deduced from numerically calculated weighting potentials. A method to determine the correction factor experimentally is also presented. Experimental and calculated values of the correction factor are shown to be in good agreement.

  5. Balancing Area Coordination: Efficiently Integrating Renewable Energy Into the Grid, Greening the Grid

    SciTech Connect

    Katz, Jessica; Denholm, Paul; Cochran, Jaquelin

    2015-06-01

    Greening the Grid provides technical assistance to energy system planners, regulators, and grid operators to overcome challenges associated with integrating variable renewable energy into the grid. Coordinating balancing area operation can promote more cost and resource efficient integration of variable renewable energy, such as wind and solar, into power systems. This efficiency is achieved by sharing or coordinating balancing resources and operating reserves across larger geographic boundaries.

  6. Remote-sensing based technique to account for sub-grid scale variability of land surface properties

    NASA Technical Reports Server (NTRS)

    Crosson, William L.; Laymon, Charles A.

    1995-01-01

    A method has been presented for the representation of sub-grid scale variability of surface properties within a land surface processes model. The method uses remotely-sensed data to directly or indirectly estimate probability density functions (PDF's) or key surface variables. Application of this technique in a coupled land surface-atmosphere model requires only grid-scale values of the variables of interest, obtained from low-resolution satellite imagery or surface/remote sensing data assimilation. The PDF's of each controlling surface property are superimposed on the respective grid-scale values to simulate sub-grid scale heterogeneity. Sensitivity studies will be carried out to ascertain the relative importance of the heterogeneity of several variables, and the degree to which non-linear property-process interactions impact large-scale fluxes.

  7. Degree distribution and assortativity in line graphs of complex networks

    NASA Astrophysics Data System (ADS)

    Wang, Xiangrong; Trajanovski, Stojan; Kooij, Robert E.; Van Mieghem, Piet

    2016-03-01

    Topological characteristics of links of complex networks influence the dynamical processes executed on networks triggered by links, such as cascading failures triggered by links in power grids and epidemic spread due to link infection. The line graph transforms links in the original graph into nodes. In this paper, we investigate how graph metrics in the original graph are mapped into those for its line graph. In particular, we study the degree distribution and the assortativity of a graph and its line graph. Specifically, we show, both analytically and numerically, the degree distribution of the line graph of an Erdős-Rényi graph follows the same distribution as its original graph. We derive a formula for the assortativity of line graphs and indicate that the assortativity of a line graph is not linearly related to its original graph. Additionally, line graphs of various graphs, e.g. Erdős-Rényi graphs, scale-free graphs, show positive assortativity. In contrast, we find certain types of trees and non-trees whose line graphs have negative assortativity.

  8. BOREAS RSS-10 TOMS Circumpolar One-Degree PAR Images

    NASA Technical Reports Server (NTRS)

    Dye, Dennis G.; Holben, Brent; Nickeson, Jaime (Editor); Hall, Forrest G. (Editor); Smith, David E. (Technical Monitor)

    2000-01-01

    The Boreal Ecosystem-Atmosphere Study (BOREAS) Remote Sensing Science (RSS)-10 team investigated the magnitude of daily, seasonal, and yearly variations of Photosynthetically Active Radiation (PAR) from ground and satellite observations. This data set contains satellite estimates of surface-incident PAR (400-700 nm, MJ/sq m) at one-degree spatial resolution. The spatial coverage is circumpolar from latitudes of 41 to 66 degrees north. The temporal coverage is from May through September for years 1979 through 1989. Eleven-year statistics are also provided: (1) mean, (2) standard deviation, and (3) coefficient of variation for 1979-89. The PAR estimates were derived from the global gridded ultraviolet reflectivity data product (average of 360, 380 nm) from the Nimbus-7 Total Ozone Mapping Spectrometer (TOMS). Image mask data are provided for identifying the boreal forest zone, and ocean/land and snow/ice-covered areas. The data are available as binary image format data files. The PAR data are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

  9. Infinite-degree-corrected stochastic block model.

    PubMed

    Herlau, Tue; Schmidt, Mikkel N; Mørup, Morten

    2014-09-01

    In stochastic block models, which are among the most prominent statistical models for cluster analysis of complex networks, clusters are defined as groups of nodes with statistically similar link probabilities within and between groups. A recent extension by Karrer and Newman [Karrer and Newman, Phys. Rev. E 83, 016107 (2011)] incorporates a node degree correction to model degree heterogeneity within each group. Although this demonstrably leads to better performance on several networks, it is not obvious whether modeling node degree is always appropriate or necessary. We formulate the degree corrected stochastic block model as a nonparametric Bayesian model, incorporating a parameter to control the amount of degree correction that can then be inferred from data. Additionally, our formulation yields principled ways of inferring the number of groups as well as predicting missing links in the network that can be used to quantify the model's predictive performance. On synthetic data we demonstrate that including the degree correction yields better performance on both recovering the true group structure and predicting missing links when degree heterogeneity is present, whereas performance is on par for data with no degree heterogeneity within clusters. On seven real networks (with no ground truth group structure available) we show that predictive performance is about equal whether or not degree correction is included; however, for some networks significantly fewer clusters are discovered when correcting for degree, indicating that the data can be more compactly explained by clusters of heterogenous degree nodes. PMID:25314493

  10. A computational Grid framework for immunological applications.

    PubMed

    Halling-Brown, Mark D; Moss, David S; Sansom, Clare E; Shepherd, Adrian J

    2009-07-13

    We have developed a computational Grid that enables us to exploit through a single interface a range of local, national and international resources. It insulates the user as far as possible from issues concerning administrative boundaries, passwords and different operating system features. This work has been undertaken as part of the European Union ImmunoGrid project whose aim is to develop simulations of the immune system at the molecular, cellular and organ levels. The ImmunoGrid consortium has members with computational resources on both sides of the Atlantic. By making extensive use of existing Grid middleware, our Grid has enabled us to exploit consortium and publicly available computers in a unified way, notwithstanding the diverse local software and administrative environments. We took 40 000 polypeptide sequences from 4000 avian and mammalian influenza strains and used a neural network for class I T-cell epitope prediction tools for 120 class I alleles and haplotypes to generate over 14 million high-quality protein-peptide binding predictions that we are mapping onto the three-dimensional structures of the proteins. By contrast, the Grid is also being used for developing new methods for class T-cell epitope predictions, where we have running batches of 120 molecular dynamics free-energy calculations. PMID:19487206

  11. Grid-like Processing of Imagined Navigation.

    PubMed

    Horner, Aidan J; Bisby, James A; Zotow, Ewa; Bush, Daniel; Burgess, Neil

    2016-03-21

    Grid cells in the entorhinal cortex (EC) of rodents [1] and humans [2] fire in a hexagonally distributed spatially periodic manner. In concert with other spatial cells in the medial temporal lobe (MTL) [3-6], they provide a representation of our location within an environment [7, 8] and are specifically thought to allow the represented location to be updated by self-motion [9]. Grid-like signals have been seen throughout the autobiographical memory system [10], suggesting a much more general role in memory [11, 12]. Grid cells may allow us to move our viewpoint in imagination [13], a useful function for goal-directed navigation and planning [12, 14-16], and episodic future thinking more generally [17, 18]. We used fMRI to provide evidence for similar grid-like signals in human entorhinal cortex during both virtual navigation and imagined navigation of the same paths. We show that this signal is present in periods of active navigation and imagination, with a similar orientation in both and with the specifically 6-fold rotational symmetry characteristic of grid cell firing. We therefore provide the first evidence suggesting that grid cells are utilized during movement of viewpoint within imagery, potentially underpinning our more general ability to mentally traverse possible routes in the service of planning and episodic future thinking. PMID:26972318

  12. Grid-like Processing of Imagined Navigation

    PubMed Central

    Horner, Aidan J.; Bisby, James A.; Zotow, Ewa; Bush, Daniel; Burgess, Neil

    2016-01-01

    Summary Grid cells in the entorhinal cortex (EC) of rodents [1] and humans [2] fire in a hexagonally distributed spatially periodic manner. In concert with other spatial cells in the medial temporal lobe (MTL) [3, 4, 5, 6], they provide a representation of our location within an environment [7, 8] and are specifically thought to allow the represented location to be updated by self-motion [9]. Grid-like signals have been seen throughout the autobiographical memory system [10], suggesting a much more general role in memory [11, 12]. Grid cells may allow us to move our viewpoint in imagination [13], a useful function for goal-directed navigation and planning [12, 14, 15, 16], and episodic future thinking more generally [17, 18]. We used fMRI to provide evidence for similar grid-like signals in human entorhinal cortex during both virtual navigation and imagined navigation of the same paths. We show that this signal is present in periods of active navigation and imagination, with a similar orientation in both and with the specifically 6-fold rotational symmetry characteristic of grid cell firing. We therefore provide the first evidence suggesting that grid cells are utilized during movement of viewpoint within imagery, potentially underpinning our more general ability to mentally traverse possible routes in the service of planning and episodic future thinking. PMID:26972318

  13. The Anatomy of a Grid portal

    NASA Astrophysics Data System (ADS)

    Licari, Daniele; Calzolari, Federico

    2011-12-01

    In this paper we introduce a new way to deal with Grid portals referring to our implementation. L-GRID is a light portal to access the EGEE/EGI Grid infrastructure via Web, allowing users to submit their jobs from a common Web browser in a few minutes, without any knowledge about the Grid infrastructure. It provides the control over the complete lifecycle of a Grid Job, from its submission and status monitoring, to the output retrieval. The system, implemented as client-server architecture, is based on the Globus Grid middleware. The client side application is based on a java applet; the server relies on a Globus User Interface. There is no need of user registration on the server side, and the user needs only his own X.509 personal certificate. The system is user-friendly, secure (it uses SSL protocol, mechanism for dynamic delegation and identity creation in public key infrastructures), highly customizable, open source, and easy to install. The X.509 personal certificate does not get out from the local machine. It allows to reduce the time spent for the job submission, granting at the same time a higher efficiency and a better security level in proxy delegation and management.

  14. Electron gas grid semiconductor radiation detectors

    DOEpatents

    Lee, Edwin Y.; James, Ralph B.

    2002-01-01

    An electron gas grid semiconductor radiation detector (EGGSRAD) useful for gamma-ray and x-ray spectrometers and imaging systems is described. The radiation detector employs doping of the semiconductor and variation of the semiconductor detector material to form a two-dimensional electron gas, and to allow transistor action within the detector. This radiation detector provides superior energy resolution and radiation detection sensitivity over the conventional semiconductor radiation detector and the "electron-only" semiconductor radiation detectors which utilize a grid electrode near the anode. In a first embodiment, the EGGSRAD incorporates delta-doped layers adjacent the anode which produce an internal free electron grid well to which an external grid electrode can be attached. In a second embodiment, a quantum well is formed between two of the delta-doped layers, and the quantum well forms the internal free electron gas grid to which an external grid electrode can be attached. Two other embodiments which are similar to the first and second embodiment involve a graded bandgap formed by changing the composition of the semiconductor material near the first and last of the delta-doped layers to increase or decrease the conduction band energy adjacent to the delta-doped layers.

  15. Spectral Topography Generation for Arbitrary Grids

    NASA Astrophysics Data System (ADS)

    Oh, T. J.

    2015-12-01

    A new topography generation tool utilizing spectral transformation technique for both structured and unstructured grids is presented. For the source global digital elevation data, the NASA Shuttle Radar Topography Mission (SRTM) 15 arc-second dataset (gap-filling by Jonathan de Ferranti) is used and for land/water mask source, the NASA Moderate Resolution Imaging Spectroradiometer (MODIS) 30 arc-second land water mask dataset v5 is used. The original source data is coarsened to a intermediate global 2 minute lat-lon mesh. Then, spectral transformation to the wave space and inverse transformation with wavenumber truncation is performed for isotropic topography smoothness control. Target grid topography mapping is done by bivariate cubic spline interpolation from the truncated 2 minute lat-lon topography. Gibbs phenomenon in the water region can be removed by overwriting ocean masked target coordinate grids with interpolated values from the intermediate 2 minute grid. Finally, a weak smoothing operator is applied on the target grid to minimize the land/water surface height discontinuity that might have been introduced by the Gibbs oscillation removal procedure. Overall, the new topography generation approach provides spectrally-derived, smooth topography with isotropic resolution and minimum damping, enabling realistic topography forcing in the numerical model. Topography is generated for the cubed-sphere grid and tested on the KIAPS Integrated Model (KIM).

  16. A Cosmic Dust Sensor Based on an Array of Grid Electrodes

    NASA Astrophysics Data System (ADS)

    Li, Y. W.; Bugiel, S.; Strack, H.; Srama, R.

    2014-04-01

    We described a low mass and high sensitivity cosmic dust trajectory sensor using a array of grid segments[1]. the sensor determines the particle velocity vector and the particle mass. An impact target is used for the detection of the impact plasma of high speed particles like interplanetary dust grains or high speed ejecta. Slower particles are measured by three planes of grid electrodes using charge induction. In contrast to conventional Dust Trajectory Sensor based on wire electrodes, grid electrodes a robust and sensitive design with a trajectory resolution of a few degree. Coulomb simulation and laboratory tests were performed in order to verify the instrument design. The signal shapes are used to derive the particle plane intersection points and to derive the exact particle trajectory. The accuracy of the instrument for the incident angle depends on the particle charge, the position of the intersection point and the signal-to-noise of the charge sensitive amplifier (CSA). There are some advantages of this grid-electrodes based design with respect to conventional trajectory sensor using individual wire electrodes: the grid segment electrodes show higher amplitudes (close to 100%induced charge) and the overall number of measurement channels can be reduced. This allows a compact instrument with low power and mass requirements.

  17. mantisGRID: a grid platform for DICOM medical images management in Colombia and Latin America.

    PubMed

    Garcia Ruiz, Manuel; Garcia Chaves, Alvin; Ruiz Ibañez, Carlos; Gutierrez Mazo, Jorge Mario; Ramirez Giraldo, Juan Carlos; Pelaez Echavarria, Alejandro; Valencia Diaz, Edison; Pelaez Restrepo, Gustavo; Montoya Munera, Edwin Nelson; Garcia Loaiza, Bernardo; Gomez Gonzalez, Sebastian

    2011-04-01

    This paper presents the mantisGRID project, an interinstitutional initiative from Colombian medical and academic centers aiming to provide medical grid services for Colombia and Latin America. The mantisGRID is a GRID platform, based on open source grid infrastructure that provides the necessary services to access and exchange medical images and associated information following digital imaging and communications in medicine (DICOM) and health level 7 standards. The paper focuses first on the data abstraction architecture, which is achieved via Open Grid Services Architecture Data Access and Integration (OGSA-DAI) services and supported by the Globus Toolkit. The grid currently uses a 30-Mb bandwidth of the Colombian High Technology Academic Network, RENATA, connected to Internet 2. It also includes a discussion on the relational database created to handle the DICOM objects that were represented using Extensible Markup Language Schema documents, as well as other features implemented such as data security, user authentication, and patient confidentiality. Grid performance was tested using the three current operative nodes and the results demonstrated comparable query times between the mantisGRID (OGSA-DAI) and Distributed mySQL databases, especially for a large number of records. PMID:20127269

  18. Collar grids for intersecting geometric components within the Chimera overlapped grid scheme

    NASA Technical Reports Server (NTRS)

    Parks, Steven J.; Buning, Pieter G.; Chan, William M.; Steger, Joseph L.

    1991-01-01

    A method for overcoming problems with using the Chimera overset grid scheme in the region of intersecting geometry components is presented. A 'collar grid' resolves the intersection region and provides communication between the component grids. This approach is validated by comparing computed and experimental data for a flow about a wing/body configuration. Application of the collar grid scheme to the Orbiter fuselage and vertical tail intersection in a computation of the full Space Shuttle launch vehicle demonstrates its usefulness for simulation of flow about complex aerospace vehicles.

  19. Spectral analysis of the Earth's topographic potential via 2D-DFT: a new data-based degree variance model to degree 90,000

    NASA Astrophysics Data System (ADS)

    Rexer, Moritz; Hirt, Christian

    2015-09-01

    Classical degree variance models (such as Kaula's rule or the Tscherning-Rapp model) often rely on low-resolution gravity data and so are subject to extrapolation when used to describe the decay of the gravity field at short spatial scales. This paper presents a new degree variance model based on the recently published GGMplus near-global land areas 220 m resolution gravity maps (Geophys Res Lett 40(16):4279-4283, 2013). We investigate and use a 2D-DFT (discrete Fourier transform) approach to transform GGMplus gravity grids into degree variances. The method is described in detail and its approximation errors are studied using closed-loop experiments. Focus is placed on tiling, azimuth averaging, and windowing effects in the 2D-DFT method and on analytical fitting of degree variances. Approximation errors of the 2D-DFT procedure on the (spherical harmonic) degree variance are found to be at the 10-20 % level. The importance of the reference surface (sphere, ellipsoid or topography) of the gravity data for correct interpretation of degree variance spectra is highlighted. The effect of the underlying mass arrangement (spherical or ellipsoidal approximation) on the degree variances is found to be crucial at short spatial scales. A rule-of-thumb for transformation of spectra between spherical and ellipsoidal approximation is derived. Application of the 2D-DFT on GGMplus gravity maps yields a new degree variance model to degree 90,000. The model is supported by GRACE, GOCE, EGM2008 and forward-modelled gravity at 3 billion land points over all land areas within the SRTM data coverage and provides gravity signal variances at the surface of the topography. The model yields omission errors of 9 mGal for gravity (1.5 cm for geoid effects) at scales of 10 km, 4 mGal (1 mm) at 2-km scales, and 2 mGal (0.2 mm) at 1-km scales.

  20. Privilege management infrastructure for virtual organizations in healthcare grids.

    PubMed

    Calvillo, Jorge; Román, Isabel; Rivas, Sergio; Roa, Laura M

    2011-03-01

    This paper is focused on the management of virtual organizations (VO) inside healthcare environments where grid technology is used as middleware for a healthcare services-oriented architecture (HSOA). Some of the main tasks considered for the provision of an efficient VO management are management of users, assignation of roles to users, assignation of privileges to roles, and definition of resources access policies. These tasks are extremely close to privilege management infrastructures (PMI), so we face VO management services as part of the PMI supporting access control to healthcare resources inside the HSOA. In order to achieve a completely open and interoperable PMI, we review and apply standards of security and architectural design. Moreover, semantic technologies are introduced in decision points for access control allowing the management of a high degree of descriptors by means of ontologies and infer the decision making through rules and reasoners. PMID:21216720