Science.gov

Sample records for 2-d optical phase

  1. Compact optical true time delay beamformer for a 2D phased array antenna using tunable dispersive elements.

    PubMed

    Ye, Xingwei; Zhang, Fangzheng; Pan, Shilong

    2016-09-01

    A hardware-compressive optical true time delay architecture for 2D beam steering in a planar phased array antenna is proposed using fiber-Bragg-grating-based tunable dispersive elements (TDEs). For an M×N array, the proposed system utilizes N TDEs and M wavelength-fixed optical carriers to control the time delays. Both azimuth and elevation beam steering are realized by programming the settings of the TDEs. An experiment is carried out to demonstrate the delay controlling in a 2×2 array, which is fed by a wideband pulsed signal. Radiation patterns calculated from the experimentally measured waveforms at the four antennas match well with the theoretical results.

  2. 2D Hilbert transform for phase retrieval of speckle fields

    NASA Astrophysics Data System (ADS)

    Gorsky, M. P.; Ryabyi, P. A.; Ivanskyi, D. I.

    2016-09-01

    The paper presents principal approaches to diagnosing the structure forming skeleton of the complex optical field. An analysis of optical field singularity algorithms depending on intensity discretization and image resolution has been carried out. An optimal approach is chosen, which allows to bring much closer the solution of the phase problem of localization speckle-field special points. The use of a "window" 2D Hilbert transform for reconstruction of the phase distribution of the intensity of a speckle field is proposed. It is shown that the advantage of this approach consists in the invariance of a phase map to a change of the position of the kernel of transformation and in a possibility to reconstruct the structure-forming elements of the skeleton of an optical field, including singular points and saddle points. We demonstrate the possibility to reconstruct the equi-phase lines within a narrow confidence interval, and introduce an additional algorithm for solving the phase problem for random 2D intensity distributions.

  3. 2D optical beam splitter using diffractive optical elements (DOE)

    NASA Astrophysics Data System (ADS)

    Wen, Fung J.; Chung, Po S.

    2006-09-01

    A novel approach for optical beam distribution into a 2-dimensional (2-D) packaged fiber arrays using 2-D Dammann gratings is investigated. This paper focuses on the design and fabrication of the diffractive optical element (DOE) and investigates the coupling efficiencies of the beamlets into a packaged V-grooved 2x2 fibre array. We report for the first time experimental results of a 2-D optical signal distribution into a packaged 2x2 fibre array using Dammann grating. This grating may be applicable to the FTTH network as it can support sufficient channels with good output uniformity together with low polarization dependent loss (PDL) and acceptable insertion loss. Using an appropriate optimization algorithm (the steepest descent algorithm in this case), the optimum profile for the gratings can be calculated. The gratings are then fabricated on ITO glass using electron-beam lithography. The overall performance of the design shows an output uniformity of around 0.14 dB and an insertion loss of about 12.63 dB, including the DOE, focusing lens and the packaged fiber array.

  4. New optical 2D modulator jacketed in rotational plastic optics

    NASA Astrophysics Data System (ADS)

    Heinol, Horst G.; Xu, Z.; Schwarte, Rudolf; Loffeld, Otmar

    1995-12-01

    Optical and therefore nontactile 3D-measurement techniques are of increasing interest in industrial automation, especially in quality control and guidance of automotive vehicles. In connection with these demands, a new type of optical modulator jacketed in rotational plastic optics is introduced in the paper. Furthermore first results obtained by simulation studies will be presented. A simple nevertheless effective way of obtaining 3D information is to illuminate the whole 3D object or scene simultaneously with rf-modulated light. This can be well achieved by using the suggested optical modulator that incorporates the properties of a high aperture and minimum aberration in the 3D-imaging process. The mentioned modulator makes use of the effect of Frustrated Total Reflection (FTR). To exploit this FTR effect in an optical 2D mixer, the gap width between media of higher dense has to be modulated by an rf-voltage applied to a piezo crystal as an rf-controlled tuning medium. Considering the limited modulation bandwidth due to the parasitic capacity of the piezo crystal, the geometrical dimension of the modulator must be made as small as possible. Therefore the spot of the light is collimated at the focal point of the jacketing rotational ellipsoid. The integrated component made of plastic optics and piezo crystal plays a substantial role for the optical modulation and imaging. Some simulation results of this optical device show that the inherent non-linearity of the FTR modulator may be neglected in practical applications, thus yielding a high modulation depth. Furthermore, a 3D-image system adopting this plastic-made optics is also depicted in the paper, which is robust and handy for several industrial applications.

  5. Competing coexisting phases in 2D water

    NASA Astrophysics Data System (ADS)

    Zanotti, Jean-Marc; Judeinstein, Patrick; Dalla-Bernardina, Simona; Creff, Gaëlle; Brubach, Jean-Blaise; Roy, Pascale; Bonetti, Marco; Ollivier, Jacques; Sakellariou, Dimitrios; Bellissent-Funel, Marie-Claire

    2016-05-01

    The properties of bulk water come from a delicate balance of interactions on length scales encompassing several orders of magnitudes: i) the Hydrogen Bond (HBond) at the molecular scale and ii) the extension of this HBond network up to the macroscopic level. Here, we address the physics of water when the three dimensional extension of the HBond network is frustrated, so that the water molecules are forced to organize in only two dimensions. We account for the large scale fluctuating HBond network by an analytical mean-field percolation model. This approach provides a coherent interpretation of the different events experimentally (calorimetry, neutron, NMR, near and far infra-red spectroscopies) detected in interfacial water at 160, 220 and 250 K. Starting from an amorphous state of water at low temperature, these transitions are respectively interpreted as the onset of creation of transient low density patches of 4-HBonded molecules at 160 K, the percolation of these domains at 220 K and finally the total invasion of the surface by them at 250 K. The source of this surprising behaviour in 2D is the frustration of the natural bulk tetrahedral local geometry and the underlying very significant increase in entropy of the interfacial water molecules.

  6. Competing coexisting phases in 2D water

    PubMed Central

    Zanotti, Jean-Marc; Judeinstein, Patrick; Dalla-Bernardina, Simona; Creff, Gaëlle; Brubach, Jean-Blaise; Roy, Pascale; Bonetti, Marco; Ollivier, Jacques; Sakellariou, Dimitrios; Bellissent-Funel, Marie-Claire

    2016-01-01

    The properties of bulk water come from a delicate balance of interactions on length scales encompassing several orders of magnitudes: i) the Hydrogen Bond (HBond) at the molecular scale and ii) the extension of this HBond network up to the macroscopic level. Here, we address the physics of water when the three dimensional extension of the HBond network is frustrated, so that the water molecules are forced to organize in only two dimensions. We account for the large scale fluctuating HBond network by an analytical mean-field percolation model. This approach provides a coherent interpretation of the different events experimentally (calorimetry, neutron, NMR, near and far infra-red spectroscopies) detected in interfacial water at 160, 220 and 250 K. Starting from an amorphous state of water at low temperature, these transitions are respectively interpreted as the onset of creation of transient low density patches of 4-HBonded molecules at 160 K, the percolation of these domains at 220 K and finally the total invasion of the surface by them at 250 K. The source of this surprising behaviour in 2D is the frustration of the natural bulk tetrahedral local geometry and the underlying very significant increase in entropy of the interfacial water molecules. PMID:27185018

  7. 2D Materials for Optical Modulation: Challenges and Opportunities.

    PubMed

    Yu, Shaoliang; Wu, Xiaoqin; Wang, Yipei; Guo, Xin; Tong, Limin

    2017-02-21

    Owing to their atomic layer thickness, strong light-material interaction, high nonlinearity, broadband optical response, fast relaxation, controllable optoelectronic properties, and high compatibility with other photonic structures, 2D materials, including graphene, transition metal dichalcogenides and black phosphorus, have been attracting increasing attention for photonic applications. By tuning the carrier density via electrical or optical means that modifies their physical properties (e.g., Fermi level or nonlinear absorption), optical response of the 2D materials can be instantly changed, making them versatile nanostructures for optical modulation. Here, up-to-date 2D material-based optical modulation in three categories is reviewed: free-space, fiber-based, and on-chip configurations. By analysing cons and pros of different modulation approaches from material and mechanism aspects, the challenges faced by using these materials for device applications are presented. In addition, thermal effects (e.g., laser induced damage) in 2D materials, which are critical to practical applications, are also discussed. Finally, the outlook for future opportunities of these 2D materials for optical modulation is given.

  8. phase_space_cosmo_fisher: Fisher matrix 2D contours

    NASA Astrophysics Data System (ADS)

    Stark, Alejo

    2016-11-01

    phase_space_cosmo_fisher produces Fisher matrix 2D contours from which the constraints on cosmological parameters can be derived. Given a specified redshift array and cosmological case, 2D marginalized contours of cosmological parameters are generated; the code can also plot the derivatives used in the Fisher matrix. In addition, this package can generate 3D plots of qH^2 and other cosmological quantities as a function of redshift and cosmology.

  9. 2D Magneto-Optical Trapping of Diatomic Molecules

    NASA Astrophysics Data System (ADS)

    Hummon, Matthew T.; Yeo, Mark; Stuhl, Benjamin K.; Collopy, Alejandra L.; Xia, Yong; Ye, Jun

    2013-04-01

    We demonstrate one- and two-dimensional transverse laser cooling and magneto-optical trapping of the polar molecule yttrium (II) oxide (YO). In a 1D magneto-optical trap (MOT), we characterize the magneto-optical trapping force and decrease the transverse temperature by an order of magnitude, from 25 to 2 mK, limited by interaction time. In a 2D MOT, we enhance the intensity of the YO beam and reduce the transverse temperature in both transverse directions. The approach demonstrated here can be applied to many molecular species and can also be extended to 3D.

  10. Robust 2D phase unwrapping based on multiresolution

    NASA Astrophysics Data System (ADS)

    Davidson, Gordon W.; Bamler, Richard

    1996-12-01

    An approach to 2D phase unwrapping for SAR interferometry is presented, based on separate steps of coarse phase and fine phase estimation. The coarse phase is constructed from instantaneous frequency estimates obtained using adaptive multiresolution, in which estimation is done of difference frequencies between resolution levels, and the frequency differences are summed over resolution levels such that a conservative phase gradient field is maintained. This allows a smoothed coarse unwrapped phase, which achieves the full terrain height, to be obtained with an unweighted least squares phase construction. The coarse phase is used to remove the bulk of the phase variation of the interferogram, allowing more accurate multilooking, and the resulting fine phase in unwrapped with weighted least squares. The unwrapping approach is verified on simulated interferograms.

  11. The use of 2D Hilbert transform for phase retrieval of speckle fields

    NASA Astrophysics Data System (ADS)

    Angelsky, O. V.; Zenkova, C. Yu.; Riabyi, P. A.

    2016-12-01

    The use of a "window" 2D Hilbert transform for reconstruction of the phase distribution of remote objects is proposed. It is shown that the advantage of this approach consists in the invariance of a phase map to a change of the position of the kernel of transformation and in a possibility to reconstruct the structure-forming elements of the skeleton of an optical field, including singular points and saddle points. We demonstrate the possibility to reconstruct the equi-phase lines within a narrow confidence interval, and introduce a new algorithm for solving the phase problem for random 2D intensity distributions.

  12. D2-D1 phase transition of columnar liquid crystals

    NASA Astrophysics Data System (ADS)

    Sun, Y. F.; Swift, J.

    1986-04-01

    The D2-D1 phase transition in columnar liquid crystals of the HAT series [e.g., HAT11 (triphenelene hexa-n-dodecanoate)] is discussed within the framework of Landau theory. The order parameters which describe the transition are abstracted from a tensor density function, and are associated with two irreducible representations of the symmetry group of the high-temperature D2 phase. A mechanism for a first-order transition is then suggested in accordance with both theoretical considerations and the experimental result for the D2-D1 transition. Two possible arrangements of the herringbone structure of the D1 phase are obtained, each of which gives six orientational states in the low-temperature D1 phase.

  13. Multi-resonant optical parametric oscillator based on 2D-PPLT nonlinear photonic crystal.

    PubMed

    Lazoul, Mohamed; Boudrioua, Azzedine; Simohamed, Lotfy-Mokhtar; Peng, Lung-Han

    2015-04-15

    The aim of this work is to achieve an optical parametric oscillator based on two-dimensional periodically poled lithium tantalate (2D-PPLT) crystals that are designed to allow multiple reciprocal lattice-vector contribution to the quasi-phase matching scheme. We are particularly interested in the effect of the multi-wavelength parametric generation performed by the 2D nonlinear photonic crystal to achieve a multi-resonant optical parametric oscillator. The performances are studied in terms of generation efficiency and multi-wavelength generation.

  14. Optical diffraction by ordered 2D arrays of silica microspheres

    NASA Astrophysics Data System (ADS)

    Shcherbakov, A. A.; Shavdina, O.; Tishchenko, A. V.; Veillas, C.; Verrier, I.; Dellea, O.; Jourlin, Y.

    2017-03-01

    The article presents experimental and theoretical studies of angular dependent diffraction properties of 2D monolayer arrays of silica microspheres. High-quality large area defect-free monolayers of 1 μm diameter silica microspheres were deposited by the Langmuir-Blodgett technique under an accurate optical control. Measured angular dependencies of zeroth and one of the first order diffraction efficiencies produced by deposited samples were simulated by the rigorous Generalized Source Method taking into account particle size dispersion and lattice nonideality.

  15. Joint 2D and 3D phase processing for quantitative susceptibility mapping: application to 2D echo-planar imaging.

    PubMed

    Wei, Hongjiang; Zhang, Yuyao; Gibbs, Eric; Chen, Nan-Kuei; Wang, Nian; Liu, Chunlei

    2017-04-01

    Quantitative susceptibility mapping (QSM) measures tissue magnetic susceptibility and typically relies on time-consuming three-dimensional (3D) gradient-echo (GRE) MRI. Recent studies have shown that two-dimensional (2D) multi-slice gradient-echo echo-planar imaging (GRE-EPI), which is commonly used in functional MRI (fMRI) and other dynamic imaging techniques, can also be used to produce data suitable for QSM with much shorter scan times. However, the production of high-quality QSM maps is difficult because data obtained by 2D multi-slice scans often have phase inconsistencies across adjacent slices and strong susceptibility field gradients near air-tissue interfaces. To address these challenges in 2D EPI-based QSM studies, we present a new data processing procedure that integrates 2D and 3D phase processing. First, 2D Laplacian-based phase unwrapping and 2D background phase removal are performed to reduce phase inconsistencies between slices and remove in-plane harmonic components of the background phase. This is followed by 3D background phase removal for the through-plane harmonic components. The proposed phase processing was evaluated with 2D EPI data obtained from healthy volunteers, and compared against conventional 3D phase processing using the same 2D EPI datasets. Our QSM results were also compared with QSM values from time-consuming 3D GRE data, which were taken as ground truth. The experimental results show that this new 2D EPI-based QSM technique can produce quantitative susceptibility measures that are comparable with those of 3D GRE-based QSM across different brain regions (e.g. subcortical iron-rich gray matter, cortical gray and white matter). This new 2D EPI QSM reconstruction method is implemented within STI Suite, which is a comprehensive shareware for susceptibility imaging and quantification. Copyright © 2016 John Wiley & Sons, Ltd.

  16. Black liquor gasification phase 2D final report

    SciTech Connect

    Kohl, A.L.; Stewart, A.E.

    1988-06-01

    This report covers work conducted by Rockwell International under Amendment 5 to Subcontract STR/DOE-12 of Cooperative Agreement DE-AC-05-80CS40341 between St. Regis Corporation (now Champion International) and the Department of Energy (DOE). The work has been designated Phase 2D of the overall program to differentiate it from prior work under the same subcontract. The overall program is aimed at demonstrating the feasibility of and providing design data for the Rockwell process for gasifying Kraft black liquor. In this process, concentrated black liquor is converted into low-Btu fuel gas and reduced melt by reaction with air in a specially designed gasification reactor.

  17. Phase diagram of split 2D dipolar spin ice

    NASA Astrophysics Data System (ADS)

    Roscilde, Tommaso; Henry, Louis-Paul

    2013-03-01

    Long-ranged dipolar interactions, which are very natural in artificial square-lattice spin ice, can mask some of the most relevant aspects of spin-ice physics, as they remove the extensive degeneracy of the ground state manifold to give a unique ground state, and they bind monopole pairs into localized spin flips. Following an earlier idea of G. Möller and R. Moessner [Phys. Rev. Lett. 96, 237202 (2006)] we investigate how adding a third direction to square ice allows to recover fundamental traits of spin-ice physics even in the presence of dipolar interactions. Using Monte Carlo simulations based on a generalized loop algorithm, we explore the phase diagram of square dipolar spin ice in which horizontal and vertical dipoles are spatially separated in a third direction (split 2D spin ice). As a function of the splitting we recover a two-fold degenerate staggered state for coplanar dipoles, and a four-fold degenerate ``Manhattan'' state for strongly split dipoles, separated by a first order transition. The competition between the two states at intermediate splitting leads to a strong suppression of the ordering transition temperatures, and makes space for the observation of a hallmark of spin-ice physics in the paramagnetic phase: pinch points in the static structure factor.

  18. Automatic angle measurement of a 2D object using optical correlator-neural networks hybrid system

    NASA Astrophysics Data System (ADS)

    Manivannan, N.; Neil, M. A. A.

    2011-04-01

    In this paper a novel method is proposed and demonstrated for automatic rotation angle measurement of a 2D object using a hybrid architecture, consisting of a 4f optical correlator with a binary phase only multiplexed matched filter and a single layer neural network. The hybrid set-up can be considered as a two-layer perceptron-like neural network; an optical correlator is the first layer and the standard single layer neural network is the second layer. The training scheme used to train the hybrid architecture is a combination of a Direct Binary Search algorithm, to train the optical correlator, and an Error Back Propagation algorithm, to train the neural network. The aim is to perform the major information processing by the optical correlator with a small additional processing by the neural network stage. This allows the system to be used for real-time applications as optics has the inherent ability to process information in a parallel manner at high speed. The neural network stage gives an extra dimension of freedom so that complicated tasks like automatic rotation angle measurement can be achieved. Results of both computer simulation and experimental set-up are presented for rotation angle measurement of an English alphabetic character as a 2D object. The experimental set-up consists of a real optical correlator using two spatial light modulators for both input and frequency plane representations and a PC based model of a single layer network.

  19. Blue Phosphorene Oxide: Strain-Tunable Quantum Phase Transitions and Novel 2D Emergent Fermions

    NASA Astrophysics Data System (ADS)

    Zhu, Liyan; Wang, Shan-Shan; Guan, Shan; Liu, Ying; Zhang, Tingting; Chen, Guibin; Yang, Shengyuan A.

    2016-10-01

    Tunable quantum phase transitions and novel emergent fermions in solid state materials are fascinating subjects of research. Here, we propose a new stable two-dimensional (2D) material, the blue phosphorene oxide (BPO), which exhibits both. Based on first-principles calculations, we show that its equilibrium state is a narrow-bandgap semiconductor with three bands at low energy. Remarkably, a moderate strain can drive a semiconductor-to-semimetal quantum phase transition in BPO. At the critical transition point, the three bands cross at a single point at Fermi level, around which the quasiparticles are a novel type of 2D pseudospin-1 fermions. Going beyond the transition, the system becomes a symmetry-protected semimetal, for which the conduction and valence bands touch quadratically at a single Fermi point that is protected by symmetry, and the low-energy quasiparticles become another novel type of 2D double Weyl fermions. We construct effective models characterizing the phase transition and these novel emergent fermions, and we point out several exotic effects, including super Klein tunneling, supercollimation, and universal optical absorbance. Our result reveals BPO as an intriguing platform for the exploration of fundamental properties of quantum phase transitions and novel emergent fermions, and also suggests its great potential in nanoscale device applications.

  20. Optical Multiplications With Single Element 2-D Acousto-Optic Laser Beam Deflector

    NASA Astrophysics Data System (ADS)

    Soos, Jolanta I.; Leepa, Douglas C.; Rosemeier, Ronald G.

    1989-05-01

    With the current need for developing very fast computers in comparison to conventional digital chip based systems, the future for optical based signal processing is very bright. Attention has turned to a different application of optics utilizing mathematical operations, in which case operations are numerical, sometimes discrete, and often algebraic in nature. Interest has been so vigorous that many view it as a small revolution in optics, whereby optical signal processing is beginning to encompass what is frequently described as optical computing. The term is fully intended to imply a close comparison with the operations performed by scientific digital canputers. This paper will describe the applications of single element 2-D acousto-optic deflectors for optical multiplication systems.

  1. Quantum simulation of 2D topological physics in a 1D array of optical cavities.

    PubMed

    Luo, Xi-Wang; Zhou, Xingxiang; Li, Chuan-Feng; Xu, Jin-Shi; Guo, Guang-Can; Zhou, Zheng-Wei

    2015-07-06

    Orbital angular momentum of light is a fundamental optical degree of freedom characterized by unlimited number of available angular momentum states. Although this unique property has proved invaluable in diverse recent studies ranging from optical communication to quantum information, it has not been considered useful or even relevant for simulating nontrivial physics problems such as topological phenomena. Contrary to this misconception, we demonstrate the incredible value of orbital angular momentum of light for quantum simulation by showing theoretically how it allows to study a variety of important 2D topological physics in a 1D array of optical cavities. This application for orbital angular momentum of light not only reduces required physical resources but also increases feasible scale of simulation, and thus makes it possible to investigate important topics such as edge-state transport and topological phase transition in a small simulator ready for immediate experimental exploration.

  2. Optical and Electronic Properties of 2D Graphitic Carbon-Nitride and Carbon Enriched Alloys

    NASA Astrophysics Data System (ADS)

    Therrien, Joel; Li, Yancen; Schmidt, Daniel; Masaki, Michael; Syed, Abdulmannan

    The two-dimensional form of graphitic carbon-nitride (gCN) has been successfully synthesized using a simple CVD process. In it's pure form, the carbon to nitrogen ratio is 0.75. By adding a carbon bearing gas to the growth environment, the C/N ratio can be increased, ultimately reaching the pure carbon form: graphene. Unlike attempts at making a 2D alloy system out of BCN, the CN system does not suffer from phase segregation and thus forms a homogeneous alloy. The synthesis approach and electronic and optical properties will be presented for the pure gCN and a selection of alloy compositions.

  3. Acousto-Optic Processing of 2-D Signals Using Temporal and Spatial Integration.

    DTIC Science & Technology

    1986-04-29

    AD-AI?3 411 ACOUSTO - OPTIC PROCESSING OF 2-D SIGNALS USING TEMPORAL 1/ AND SPATIAL INTEGR..(U) CRLIFORNIA INST OF TECH PASADENA DEPT OF ELECTRICAL...LECTE 3 FINAL REORT4 Submitted to: Al FORCE OFFICE OF SCIENTIFIC RESEARCH Grant Number AFOSR-82-0128 :A of % ACOUSTO - OPTIC PROCISSING OF 2-D SIGNALS...Psaltis, Applied Optics, Vol. 21, No. 3, 1 February 1982. (3) " Acousto - Optic /CCD Image Processor, Demetri Psaltis, Eung Gi Paek and Santosh Venkatesh

  4. 2-D Acousto-Optic Signal Processors for Simultaneous Spectrum Analysis and Direction Finding

    DTIC Science & Technology

    1990-11-01

    National Dfense Defence nationale 2-D ACOUSTO - OPTIC SIGNAL PROCESSORS FOR SIMULTANEOUS SPECTRUM ANALYSIS 00 AND DIRECTION FINDING (U) by NM Jim P.Y...Wr pdft .1w I0~1111191 3 05089 National DIfense Defence nationale 2-D ACOUSTO - OPTIC SIGNAL PROCESSORS FOR SIMULTANEOUS SPECTRUM ANALYSIS AND DIRECTION...Processing, J.T. Tippet et al., Eds., Chapter 38, pp. 715-748, MIT Press, Cambridge 1965. [6] A.E. Spezio," Acousto - optics for Electronic Warfare

  5. 2-D weighted least-squares phase unwrapping

    DOEpatents

    Ghiglia, D.C.; Romero, L.A.

    1995-06-13

    Weighted values of interferometric signals are unwrapped by determining the least squares solution of phase unwrapping for unweighted values of the interferometric signals; and then determining the least squares solution of phase unwrapping for weighted values of the interferometric signals by preconditioned conjugate gradient methods using the unweighted solutions as preconditioning values. An output is provided that is representative of the least squares solution of phase unwrapping for weighted values of the interferometric signals. 6 figs.

  6. 2-D weighted least-squares phase unwrapping

    DOEpatents

    Ghiglia, Dennis C.; Romero, Louis A.

    1995-01-01

    Weighted values of interferometric signals are unwrapped by determining the least squares solution of phase unwrapping for unweighted values of the interferometric signals; and then determining the least squares solution of phase unwrapping for weighted values of the interferometric signals by preconditioned conjugate gradient methods using the unweighted solutions as preconditioning values. An output is provided that is representative of the least squares solution of phase unwrapping for weighted values of the interferometric signals.

  7. Hexatic and Microemulsion Phases in the 2d Quantum Plasma

    NASA Astrophysics Data System (ADS)

    Clark, Bryan; Casula, Michele; Ceperley, David

    2009-03-01

    It has been long known that the two-dimensional one component plasma supports both a Wigner-crystal and liquid phase. Classically [1,2], it is known that a hexatic phase exists but it is not known how this hexatic phase extends into the quantum regime. Moreover, at low temperature, phenomenological arguments [3] from Jamei, et. al. suggest the existence of microemulsion phases including stripes and bubbles. We use diffusion and path integral Monte Carlo to map out this phase diagram. We are able to extend the hexatic phase into the quantum regime as well as quantify the nature of the defects and exponents in the long range quantum system. We also specify the the nature, extent and existence (or lack thereof) of the expected low-T microemulsion phases. [0pt] [1] Muto, S. & Aoki, H. Crystallization of a classical two-dimensional electron system: Positional and orientational orders. Phys. Rev. B 59, 14911(1999).[0pt] [2] He, W.J. et al. Phase transition in a classical two-dimensional electron system. Phys. Rev. B 68, 195104(2003).[0pt] [3] Jamei, R., Kivelson, S. & Spivak, B. Universal Aspects of Coulomb-Frustrated Phase Separation. Phys. Rev. Lett. 94, 056805-4(2005).

  8. Quantum spin Hall phase in 2D trigonal lattice

    PubMed Central

    Wang, Z. F.; Jin, Kyung-Hwan; Liu, Feng

    2016-01-01

    The quantum spin Hall (QSH) phase is an exotic phenomena in condensed-matter physics. Here we show that a minimal basis of three orbitals (s, px, py) is required to produce a QSH phase via nearest-neighbour hopping in a two-dimensional trigonal lattice. Tight-binding model analyses and calculations show that the QSH phase arises from a spin–orbit coupling (SOC)-induced s–p band inversion or p–p bandgap opening at Brillouin zone centre (Γ point), whose topological phase diagram is mapped out in the parameter space of orbital energy and SOC. Remarkably, based on first-principles calculations, this exact model of QSH phase is shown to be realizable in an experimental system of Au/GaAs(111) surface with an SOC gap of ∼73 meV, facilitating the possible room-temperature measurement. Our results will extend the search for substrate supported QSH materials to new lattice and orbital types. PMID:27599580

  9. Development of 2-D-MAX-DOAS and retrievals of trace gases and aerosols optical properties

    NASA Astrophysics Data System (ADS)

    Ortega, Ivan

    satellites and atmospheric models. Chapter 3 presents an innovative retrieval approach to measure AOD430 and the aerosol phase function parameter, g, without the need for absolute radiance calibration; the retrieval is based on solar azimuth distributions of the Raman Scattering Probability (RSP), the near-absolute Rotational Raman Scattering (RRS) intensity, during the Department of Energy Two Column Aerosol Project (TCAP) at Cape Cod, MA. Furthermore, the TCAP field campaign provides a unique dataset to evaluate innovative retrieval algorithms and perform radiation closure studies. In Chapters 4 I describe the effect of persistent elevated aerosol layers on the apparent absorption of the collision induced absorption of oxygen (O2-O2, or O4) as seen by the ground based 2-D-MAX-DOAS. Chapter 5 discusses the effect of chemical composition of aerosols for optical closure of aerosol extinction as characterized by ground based (2-D-MAX-DOAS) and airborne remote sensing instruments (HSRL-2) and in-situ observations of aerosol optical properties calculated from size distributions measured aboard the DoE G-1 aircraft. Chapter 5 also includes a discussion on the effects of dry, moist, and size-corrections that need to be applied to the in-situ observations in order to infer extinction in the atmosphere. In the final Chapter 6, I present a comprehensive analysis of CHOCHO, HCHO, and NO2 column measurements obtained in multiple field deployments of MAX-DOAS under different NOx (NO + NO2) conditions and VOC precursors. In particular, I assess the magnitude of the ratio of CHOCHO to HCHO (RGF), which has been proposed as a metric to distinguish biogenic and/or anthropogenic VOC (BVOC/AVOC) influences, and show with box-modeling that the concentration of NO2 and dictates the value of RGF . I proposed a new metric of RGF based on box-modeling and field measurements to distinguish AVOC/BVOC influences and split in BVOCs.

  10. Acousto-Optic Processing of 2-D Signals Using Temporal and Spatial Integration.

    DTIC Science & Technology

    1983-05-31

    Documents includes data on: Architectures; Coherence Properties of Pulsed Laser Diodes; Acousto - optic device data; Dynamic Range Issues; Image correlation; Synthetic aperture radar; 2-D Fourier transform; and Moments.

  11. Quasiparticle Spectrum of 2-d Dirac Vortices in Optical Lattices

    NASA Astrophysics Data System (ADS)

    Haddad, Laith

    2009-10-01

    Bose-Einstein condensates in a honeycomb optical lattice are described by a nonlinear Dirac equaton (NLDE) in the long wavelength, mean field limit [1]. The upper and lower two-spinor equations decouple and superficially resemble the equations of previously studied NLDE's such as the Soler model for extended fermions. Although much work has been done on NLDE's, the bulk of the literature deals with models with Poincare invariant nonlinearites. In contrast our equations break Poincare symmetry providing an opportunity to study phenomenological models in cosmology and particle physics where this symmetry is not manifest. We obtain and classify localized solutions to our equations for both repulsive and attractive contact interactions. We also derive analogs of the Bogoliubov-de Gennes equations for the lattice and use these to study the stability and low energy spectrum of our solutions showing the existence of stable exotic structures such as vortices with fractional statistics.[4pt] [1] L. H. Haddad and L. D. Carr, ``The Nonlinear Dirac Equation in Bose-Einstein Condensates: Foundation and Symmetries,'' Physica D: Nonlinear Phenomena, v. 238, p. 1413 (2009). http://arxiv.org/pdf/0803.3039v1

  12. Surface Tension Components Based Selection of Cosolvents for Efficient Liquid Phase Exfoliation of 2D Materials.

    PubMed

    Shen, Jianfeng; Wu, Jingjie; Wang, Man; Dong, Pei; Xu, Jingxuan; Li, Xiaoguang; Zhang, Xiang; Yuan, Junhua; Wang, Xifan; Ye, Mingxin; Vajtai, Robert; Lou, Jun; Ajayan, Pulickel M

    2016-05-01

    A proper design of direct liquid phase exfoliation (LPE) for 2D materials as graphene, MoS2 , WS2 , h-BN, Bi2 Se3 , MoSe2 , SnS2 , and TaS2 with common cosolvents is carried out based on considering the polar and dispersive components of surface tensions of various cosolvents and 2D materials. It has been found that the exfoliation efficiency is enhanced by matching the ratio of surface tension components of cosolvents to that of the targeted 2D materials, based on which common cosolvents composed of IPA/water, THF/water, and acetone/water can be designed for sufficient LPE process. In this context, the library of low-toxic and low-cost solvents with low boiling points for LPE is infinitely enlarged when extending to common cosolvents. Polymer-based composites reinforced with a series of different 2D materials are compared with each other. It is demonstrated that the incorporation of cosolvents-exfoliated 2D materials can substantially improve the mechanical and thermal properties of polymer matrices. Typically, with the addition of 0.5 wt% of such 2D material as MoS2 nanosheets, the tensile strength and Young's modulus increased up to 74.85% and 136.97%, respectively. The different enhancement effect of 2D materials is corresponded to the intrinsic properties and LPE capacity of 2D materials.

  13. Toward a 2-D magneto-optical trap for polar molecules

    NASA Astrophysics Data System (ADS)

    Hummon, Matthew; Stuhl, Benjamin; Yeo, Mark; Collopy, Alejandra; Ye, Jun

    2012-06-01

    The additional structure that arises from the rotational degree of freedom in diatomic molecules makes difficult the adaptation of a traditional atomic magneto-optical trap (MOT) for use with molecules. We describe progress toward development of a 2-D MOT for laser cooled yttrium monoxide molecules based on a resonant LC baseball coil geometry.

  14. Optical fiber phase discriminator.

    PubMed

    Danielson, B L

    1978-11-15

    Phase discriminators are devices widely used at rf and microwave frequencies to convert phase, or frequency, changes to amplitude changes. They find widespread use in generating audio feedback signals for frequency stabilization of oscillators and in angle demodulation applications. This paper demonstrates that similar devices, with similar functions, can be constructed in the visible region using optical fibers as delay-line elements. The operating principles of an optical-fiber delay-line phase discriminator are discussed. The sensitivity is shown to be proportional to the fiber propagation-delay time. A device working at 0.6328 microm is described and compared with predictions.

  15. Mirror effects and optical meta-surfaces in 2d atomic arrays

    NASA Astrophysics Data System (ADS)

    Shahmoon, Ephraim; Wild, Dominik; Lukin, Mikhail; Yelin, Susanne

    2016-05-01

    Strong optical response of natural and artificial (meta-) materials typically relies on the fact that the lattice constant that separates their constituent particles (atoms or electromagnetic resonators, respectively) is much smaller than the optical wavelength. Here we consider a single layer of a 2d atom array with a lattice constant on the order of an optical wavelength, which can be thought of as a highly dilute 2d metamaterial (meta-surface). Our theoretical analysis shows how strong scattering of resonant incoming light off the array can be controlled by choosing its lattice constant, e.g. allowing the array to operate as a perfect mirror or a retro-reflector for most incident angles of the incoming light. We discuss the prospects for quantum metasurfaces, i.e. the ability to shape the output quantum state of light by controlling the atomic states, and the possible generality of our results as a universal wave phenomena.

  16. Optical design of wavelength selective CPVT system with 3D/2D hybrid concentration

    NASA Astrophysics Data System (ADS)

    Ahmad, N.; Ijiro, T.; Yamada, N.; Kawaguchi, T.; Maemura, T.; Ohashi, H.

    2012-10-01

    Optical design of a concentrating photovoltaic/thermal (CPVT) system is carried out. Using wavelength-selective optics, the system demonstrates 3-D concentration onto a solar cell and 2-D concentration onto a thermal receiver. Characteristics of the two types of concentrator systems are examined with ray-tracing analysis. The first system is a glazed mirror-based concentrator system mounted on a 2-axis pedestal tracker. The size of the secondary optical element is minimized to decrease the cost of the system, and it has a wavelength-selective function for performing 3-D concentration onto a solar cell and 2-D concentration onto a thermal receiver. The second system is a non-glazed beamdown concentrator system containing parabolic mirrors in the lower part. The beam-down selective mirror performs 3-D concentration onto a solar cell placed above the beam-down selective mirror, and 2-D concentration down to a thermal receiver placed at the bottom level. The system is mounted on a two-axis carousel tracker. A parametric study is performed for those systems with different geometrical 2-D/3-D concentration ratios. Wavelength-selective optics such as hot/cold mirrors and spectrum-splitting technologies are taken into account in the analysis. Results show reduced heat load on the solar cell and increased total system efficiency compared to a non-selective CPV system. Requirements for the wavelength-selective properties are elucidated. It is also shown that the hybrid concept with 2-D concentration onto a thermal receiver and 3-D concentration onto a solar cell has an advantageous geometry because of the high total system efficiency and compatibility with the piping arrangement of the thermal receiver.

  17. Digital phase-stepping holographic interferometry in measuring 2-D density fields

    NASA Astrophysics Data System (ADS)

    Lanen, T. A. W. M.; Nebbeling, C.; van Ingen, J. L.

    1990-06-01

    This paper presents a holographic interferometer technique for measuring transparent (2-D or quasi 2-D) density fields. To be able to study the realization of such a field at a certain moment of time, the field is “frozen” on a holographic plate. During the reconstruction of the density field from the hologram the length of the path traversed by the reconstruction beam is diminished in equal steps by applying a computer controlled voltage to a piezo-electric crystal that translates a mirror. Four phase-stepped interferograms resulting from this pathlength variation are digitized and serve as input to an algorithm for computing the phase surface. The method is illustrated by measuring the basically 2-D density field existing around a heated horizontal cylinder in free convection.

  18. A 2D-ELDOR study of the liquid ordered phase in multilamellar vesicle membranes.

    PubMed

    Costa-Filho, Antonio J; Shimoyama, Yuhei; Freed, Jack H

    2003-04-01

    2D-ELDOR spectroscopy has been employed to study the dynamic structure of the liquid-ordered (Lo) phase versus that of the liquid-crystalline (Lc) phase in multibilayer phospholipid vesicles without (Lc) and with (Lo) cholesterol, using end-chain and headgroup labels and spin-labeled cholestane. The spectra are in most cases found to be dramatically different for these two phases. Thus, visual inspection of the 2D-ELDOR spectra provides a convenient way to distinguish the two phases in membranes. Detailed analysis shows these observations are due to increased ordering in the Lo phase and modified reorientation rates. In the Lo phase, acyl chains undergo a faster rotational diffusion and higher ordering than in the Lc phase, whereas spin-labeled cholestane exhibits slower rotational diffusion and higher ordering. On the other hand, the choline headgroup in the Lo phase exhibits faster motion and reduced but realigned ordering versus the Lc phase. The microscopic translational diffusion rates in the Lo phase are significantly reduced in the presence of cholesterol. These results are compared with previous studies, and a consistent model is provided for interpreting them in terms of the differences in the dynamic structure of the Lo and Lc phases.

  19. A 2D-ELDOR Study of the Liquid Ordered Phase in Multilamellar Vesicle Membranes

    PubMed Central

    Costa-Filho, Antonio J.; Shimoyama, Yuhei; Freed, Jack H.

    2003-01-01

    2D-ELDOR spectroscopy has been employed to study the dynamic structure of the liquid-ordered (Lo) phase versus that of the liquid-crystalline (Lc) phase in multibilayer phospholipid vesicles without (Lc) and with (Lo) cholesterol, using end-chain and headgroup labels and spin-labeled cholestane. The spectra are in most cases found to be dramatically different for these two phases. Thus, visual inspection of the 2D-ELDOR spectra provides a convenient way to distinguish the two phases in membranes. Detailed analysis shows these observations are due to increased ordering in the Lo phase and modified reorientation rates. In the Lo phase, acyl chains undergo a faster rotational diffusion and higher ordering than in the Lc phase, whereas spin-labeled cholestane exhibits slower rotational diffusion and higher ordering. On the other hand, the choline headgroup in the Lo phase exhibits faster motion and reduced but realigned ordering versus the Lc phase. The microscopic translational diffusion rates in the Lo phase are significantly reduced in the presence of cholesterol. These results are compared with previous studies, and a consistent model is provided for interpreting them in terms of the differences in the dynamic structure of the Lo and Lc phases. PMID:12668470

  20. Optical CDMA system using 2-D run-length limited code

    NASA Astrophysics Data System (ADS)

    Liu, Maw-Yang; Jiang, Joe-Air

    2010-10-01

    In this paper, time-spreading wavelength-hopping optical CDMA system using 2-D run-length limited code is investigated. The run-length limited code we use here is predicated upon spatial coding scheme, which can improve system performance significantly. In our proposed system, we employ carrier-hopping prime code and its shifted version as signature sequences. Based on the zero auto-correlation sidelobes property of signature sequence, we propose a two-state trellis coding architecture, which utilizes 2-D parallel detection scheme. The proposed scheme is compact and simple that can be applied to more complicated trellis to further enhance system performance. Multiple access interference is the main deterioration factor in optical CDMA system that affects system performance adversely. Aside from the multiple access interference, some of the adverse impacts of system performance are also taken into consideration, which include thermal noise, shot noise, relative intensity noise, and beat noise.

  1. Phase states of a 2D easy-plane ferromagnet with strong inclined anisotropy

    SciTech Connect

    Fridman, Yu. A. Klevets, F. N.; Gorelikov, G. A.; Meleshko, A. G.

    2012-12-15

    We investigate the spin states of a 2D film exhibiting easy-axis anisotropy and a strong single-ion inclined anisotropy whose axis forms a certain angle with the normal to the film surface. Such a system may have an angular ferromagnetic phase, a spatially inhomogeneous state, and a quadrupole phase, whose realization depends substantially on the inclined anisotropy and the orientation of the wavevector in the film plane.

  2. Optically interconnected phased arrays

    NASA Technical Reports Server (NTRS)

    Bhasin, Kul B.; Kunath, Richard R.

    1988-01-01

    Phased-array antennas are required for many future NASA missions. They will provide agile electronic beam forming for communications and tracking in the range of 1 to 100 GHz. Such phased arrays are expected to use several hundred GaAs monolithic integrated circuits (MMICs) as transmitting and receiving elements. However, the interconnections of these elements by conventional coaxial cables and waveguides add weight, reduce flexibility, and increase electrical interference. Alternative interconnections based on optical fibers, optical processing, and holography are under evaluation as possible solutions. In this paper, the current status of these techniques is described. Since high-frequency optical components such as photodetectors, lasers, and modulators are key elements in these interconnections, their performance and limitations are discussed.

  3. Pulse Propagation Effects in Optical 2D Fourier-Transform Spectroscopy: Theory.

    PubMed

    Spencer, Austin P; Li, Hebin; Cundiff, Steven T; Jonas, David M

    2015-04-30

    A solution to Maxwell's equations in the three-dimensional frequency domain is used to calculate rephasing two-dimensional Fourier transform (2DFT) spectra of the D2 line of atomic rubidium vapor in argon buffer gas. Experimental distortions from the spatial propagation of pulses through the sample are simulated in 2DFT spectra calculated for the homogeneous Bloch line shape model. Spectral features that appear at optical densities of up to 3 are investigated. As optical density increases, absorptive and dispersive distortions start with peak shape broadening, progress to peak splitting, and ultimately result in a previously unexplored coherent transient twisting of the split peaks. In contrast to the low optical density limit, where the 2D peak shape for the Bloch model depends only on the total dephasing time, these distortions of the 2D peak shape at finite optical density vary with the waiting time and the excited state lifetime through coherent transient effects. Experiment-specific conditions are explored, demonstrating the effects of varying beam overlap within the sample and of pseudo-time domain filtering. For beam overlap starting at the sample entrance, decreasing the length of beam overlap reduces the line width along the ωτ axis but also reduces signal intensity. A pseudo-time domain filter, where signal prior to the center of the last excitation pulse is excluded from the FID-referenced 2D signal, reduces propagation distortions along the ωt axis. It is demonstrated that 2DFT rephasing spectra cannot take advantage of an excitation-detection transformation that can eliminate propagation distortions in 2DFT relaxation spectra. Finally, the high optical density experimental 2DFT spectrum of rubidium vapor in argon buffer gas [J. Phys. Chem. A 2013, 117, 6279-6287] is quantitatively compared, in line width, in depth of peak splitting, and in coherent transient peak twisting, to a simulation with optical density higher than that reported.

  4. Evidence for a New Intermediate Phase in a Strongly Correlated 2D System near Wigner Crystallization

    NASA Astrophysics Data System (ADS)

    Gao, Xuan; Qiu, Richard; Goble, Nicholas; Serafin, Alex; Yin, Liang; Xia, Jian-Sheng; Sullivan, Neil; Pfeiffer, Loren; West, Ken

    How the two dimensional (2D) quantum Wigner crystal (WC) transforms into the metallic liquid phase remains an outstanding problem in physics. In theories considering the 2D WC to liquid transition in the clean limit, it was suggested that a number of intermediate phases might exist. We have studied the transformation between the metallic fluid phase and the low magnetic field reentrant insulating phase (RIP) which was interpreted as due to the WC [Qiu et al., PRL 108, 106404 (2012)], in a strongly correlated 2D hole system in GaAs quantum well with large interaction parameter rs (~20-30) and high mobility. Instead of a sharp transition, we found that increasing density (or lowering rs) drives the RIP into a state where the incipient RIP coexists with Fermi liquid. This apparent mixture phase intermediate between Fermi liquid and WC also exhibits a non-trivial temperature dependent resistivity behavior which can be qualitatively understood by the reversed melting of WC in the mixture, in analogy to the Pomeranchuk effect in the solid-liquid mixture of Helium-3. X.G. thanks NSF (DMR-0906415) for supporting work at CWRU. Experiments at the NHMFL High B/T Facility were supported by NSF Grant 0654118 and the State of Florida. L.P. thanks the Gordon and Betty Moore Foundation and NSF MRSEC (DMR-0819860) for support.

  5. Metastable phases of 2D boron sheets on Ag(1 1 1)

    NASA Astrophysics Data System (ADS)

    Zhong, Qing; Zhang, Jin; Cheng, Peng; Feng, Baojie; Li, Wenbin; Sheng, Shaoxiang; Li, Hui; Meng, Sheng; Chen, Lan; Wu, Kehui

    2017-03-01

    Two reproducible new phases of 2D boron sheets have been found on Ag(1 1 1). One of them shares the identical atomic structure of the previously reported S1 phase (β 12 sheet) but has a different rotational relationship with the substrate, and thus exhibits very different features in scanning tunneling microscopy (STM) images. The other new phase has a hexagonal symmetry and is proposed to be the long-expected α-sheet. Both of these two boron sheets are confirmed to be metallic by scanning tunneling spectroscopy.

  6. Single-shot and phase-shifting digital holographic microscopy using a 2-D grating.

    PubMed

    Yang, Taeseok Daniel; Kim, Hyung-Jin; Lee, Kyoung J; Kim, Beop-Min; Choi, Youngwoon

    2016-05-02

    We demonstrate digital holographic microscopy that, while being based on phase-shifting interferometry, is capable of single-shot measurements. A two-dimensional (2-D) diffraction grating placed in a Fourier plane of a standard in-line holographic phase microscope generates multiple copies of a sample image on a camera sensor. The identical image copies are spatially separated with different overall phase shifts according to the diffraction orders. The overall phase shifts are adjusted by controlling the lateral position of the grating. These phase shifts are then set to be multiples of π/2. Interferograms composed of four image copies combined with a parallel reference beam are acquired in a single shot. The interferograms are processed through a phase-shifting algorithm to produce a single complex image. By taking advantage of the higher sampling capacity of the in-line holography, we can increase the imaging information density by a factor of 3 without compromising the imaging acquisition speed.

  7. Analysis of the antiferromagnetic phase transitions of the 2D Kondo lattice

    NASA Astrophysics Data System (ADS)

    Jones, Barbara

    2010-03-01

    The Kondo lattice continues to present an interesting and relevant challenge, with its interactions between Kondo, RKKY, and coherent order. We present our study[1] of the antiferromagnetic quantum phase transitions of a 2D Kondo-Heisenberg square lattice. Starting from the nonlinear sigma model as a model of antiferromagnetism, we carry out a renormalization group analysis of the competing Kondo-RKKY interaction to one-loop order in an ɛ-expansion. We find a new quantum critical point (QCP) strongly affected by Kondo fluctuations. Near this QCP, there is a breakdown of hydrodynamic behavior, and the spin waves are logarithmically frozen out. The renormalization group results allow us to propose a new phase diagram near the antiferromagnetic fixed point of this 2D Kondo lattice model. The T=0 phase diagram contains four phases separated by a tetracritical point, the new QCP. For small spin fluctuations, we find a stable local magnetic moment antiferromagnet. For stronger coupling, region II is a metallic quantum disordered paramagnet. We find in region III a paramagnetic phase driven by Kondo interactions, with possible ground states of a heavy fermion liquid or a Kondo driven spin-liquid. The fourth phase is a spiral phase, or a large-Fermi-surface antiferromagnetic phase. We will describe these phases in more detail, including possible experimental confirmation of the spiral phase. The existence of the tetracritical point found here would be expected to affect the phase diagram at finite temperatures as well. In addition, It is hoped that these results, and particularly the Kondo interaction paramagnetic phase, will serve to bridge to solutions starting from the opposite limit, of a Kondo effect leading to a heavy fermion ground state. Work in collaboration with T. Tzen Ong. [4pt] [1] T. Ong and B. A. Jones, Phys. Rev. Lett. 103, 066405 (2009).

  8. Modeling and simulation of ultrasound fields generated by 2D phased array transducers for medical applications.

    PubMed

    Matrone, G; Quaglia, F; Magenes, G

    2010-01-01

    Modern ultrasound imaging instrumentation for clinical applications allows real-time volumetric scanning of the patients' body. 4D imaging has been made possible thanks to the development of new echographic probes which consist in 2D phased arrays of piezoelectric transducers. In these new devices it is the system electronics which properly drives the matrix elements and focuses the beam in order to obtain a sequence of volumetric images. This paper introduces an ultrasound field simulator based on the Spatial Impulse Response method which is being properly developed to analyze the characteristics of the ultrasound field generated by a 2D phased array of transducers. Thanks to its high configurability by the user, it will represent a very useful tool for electronics designers in developing 4D ultrasound imaging systems components.

  9. 2D Superexchange-mediated magnetization dynamics in an optical lattice

    NASA Astrophysics Data System (ADS)

    Goldschmidt, Elizabeth; Brown, Roger; Wyllie, Robert; Koller, Silvio; Foss-Feig, Michael; Porto, Trey

    2015-05-01

    The interplay of magnetic exchange interactions and tunneling underlies many complex quantum phenomena observed in real materials. We study nonequilibrium magnetization dynamics in an extended 2D system by loading effective spin-1/2 bosons into a spin-dependent optical lattice, and we use the lattice to separately control the resonance conditions for tunneling and superexchange. After preparing a nonequilibrium antiferromagnetically ordered state, we observe relaxation dynamics governed by two well-separated rates, which scale with the underlying Hamiltonian parameters associated with superexchange and tunneling. Remarkably, with tunneling off-resonantly suppressed, we are able to observe superexchange-dominated dynamics over two orders of magnitude in magnetic coupling strength, despite the presence of vacancies. In this regime, the measured timescales are in agreement with simple theoretical estimates, but the detailed dynamics of this 2D, strongly-correlated, and far-from-equilibrium quantum system remain out of reach of current computational techniques. Now at Georgia Tech Research Institute.

  10. Fundamental performance assessment of 2-D myocardial elastography in a phased-array configuration.

    PubMed

    Luo, Jianwen; Lee, Wei-Ning; Konofagou, Elisa E

    2009-10-01

    Two-dimensional myocardial elastography, an RF-based, speckle-tracking technique, uses 1-D cross-correlation and recorrelation methods in a 2-D search, and can estimate and image the 2-D transmural motion and deformation of the myocardium so as to characterize the cardiac function. Based on a 3-D finite-element (FE) canine left-ventricular model, a theoretical framework was previously developed by our group to evaluate the estimation quality of 2-D myocardial elastography using a linear array. In this paper, an ultrasound simulation program, Field II, was used to generate the RF signals of a model of the heart in a phased-array configuration and under 3-D motion conditions; thus simulating a standard echocardiography exam. The estimation method of 2-D myocardial elastography was adapted for use with such a configuration. All elastographic displacements and strains were found to be in good agreement with the FE solutions, as indicated by the mean absolute error (MAE) between the two. The classified first and second principal strains approximated the radial and circumferential strains, respectively, in the phased-array configuration. The results at different sonographic signal-to-noise ratios (SNR(s)) showed that the MAEs of the axial, lateral, radial, and circumferential strains remained relatively constant when the SNR(s) was equal to or higher than 20 dB. The MAEs of the strain estimation were not significantly affected when the acoustic attenuation was included in the simulations. A significantly reduced number of scatterers could be used to speed up the simulation, without sacrificing the estimation quality.The proposed framework can further be used to assess the estimation quality, explore the theoretical limitation and investigate the effects of various parameters in 2-D myocardial elastography under more realistic conditions.

  11. BKT phase transition in a 2D system with long-range dipole-dipole interaction

    NASA Astrophysics Data System (ADS)

    Fedichev, P. O.; Men'shikov, L. I.

    2012-01-01

    We consider phase transitions in 2D XY-like systems with long-range dipole-dipole interactions and demonstrate that BKT-type phase transition always occurs separating the ordered (ferroelectric) and the disordered (paraelectric) phases. The low-temperature phase corresponds to a thermal state with bound vortex-antivortex pairs characterized by linear attraction at large distances. Using the Maier-Schwabl topological charge model, we show that bound vortex pairs polarize and screen the vortex-antivortex interaction, leaving only the logarithmic attraction at sufficiently large separations between the vortices. At higher temperatures the pairs dissociate and the phase transition similar to BKT occurs, though at a larger temperature than in a system without the dipole-dipole interaction.

  12. Application of Fresnel diffraction from a 2D array of reflective disks in optical profilometry of a flat surface

    NASA Astrophysics Data System (ADS)

    Darudi, Ahmad; Asgari, Pegah; Pourvais, Yousef

    2015-05-01

    Optical methods of three-dimensional profilometry have been of growing interest in both industrial and scientific applications. These techniques provide absolutely non-destructive measurement due to their non-contact nature and maintain their high precision in a large field of view. Most of these techniques however, are based on interferometry which happens to be considerably sensitive to environmental noises such as turbulence and vibration. We have used the phenomena of Fresnel diffraction from phase-steps instead of interferometry to maintain a higher precision and reduce sensitivity to environmental noises. This phenomena has been recently introduced as a method for precise measurement of wavelength, thickness and refractive index. A 2D array of reflective disks are placed above the test surface to provide the required phase-steps. In this paper, theoretical principles of Fresnel diffraction from phase-steps are discussed and the experimental results of testing an optical flat surface are presented. A flat mirror surface has been tested as an optical test surface and is been profiled. The results show that the method is precise and is not sensitive to environmental noises such as vibration and turbulence. Furthermore, the method seems to be a powerful means for testing of curved surfaces, too.

  13. A New Family of 2-D Optical Orthogonal Codes and Analysis of Its Performance in Optical CDMA Access Networks

    NASA Astrophysics Data System (ADS)

    Shurong, Sun; Yin, Hongxi; Wang, Ziyu; Xu, Anshi

    2006-04-01

    A new family of two-dimensional optical orthogonal code (2-D OOC), one-coincidence frequency hop code (OCFHC)/OOC, which employs OCFHC and OOC as wavelengthhopping and time-spreading patterns, respectively, is proposed in this paper. In contrary to previously constructed 2-D OOCs, OCFHC/OOC provides more choices on the number of available wavelengths and its cardinality achieves the upper bound in theory without sacrificing good auto-and-cross correlation properties, i.e., the correlation properties of the code is still ideal. Meanwhile, we utilize a new method, called effective normalized throughput, to compare the performance of diverse codes applicable to optical code division multiple access (OCDMA) systems besides conventional measure bit error rate, and the results indicate that our code performs better than obtained OCDMA codes and is truly applicable to OCDMA networks as multiaccess codes and will greatly facilitate the implementation of OCDMA access networks.

  14. Inspection design using 2D phased array, TFM and cueMAP software

    SciTech Connect

    McGilp, Ailidh; Dziewierz, Jerzy; Lardner, Tim; Mackersie, John; Gachagan, Anthony

    2014-02-18

    A simulation suite, cueMAP, has been developed to facilitate the design of inspection processes and sparse 2D array configurations. At the core of cueMAP is a Total Focusing Method (TFM) imaging algorithm that enables computer assisted design of ultrasonic inspection scenarios, including the design of bespoke array configurations to match the inspection criteria. This in-house developed TFM code allows for interactive evaluation of image quality indicators of ultrasonic imaging performance when utilizing a 2D phased array working in FMC/TFM mode. The cueMAP software uses a series of TFM images to build a map of resolution, contrast and sensitivity of imaging performance of a simulated reflector, swept across the inspection volume. The software takes into account probe properties, wedge or water standoff, and effects of specimen curvature. In the validation process of this new software package, two 2D arrays have been evaluated on 304n stainless steel samples, typical of the primary circuit in nuclear plants. Thick section samples have been inspected using a 1MHz 2D matrix array. Due to the processing efficiency of the software, the data collected from these array configurations has been used to investigate the influence sub-aperture operation on inspection performance.

  15. Inspection design using 2D phased array, TFM and cueMAP software

    NASA Astrophysics Data System (ADS)

    McGilp, Ailidh; Dziewierz, Jerzy; Lardner, Tim; Mackersie, John; Gachagan, Anthony

    2014-02-01

    A simulation suite, cueMAP, has been developed to facilitate the design of inspection processes and sparse 2D array configurations. At the core of cueMAP is a Total Focusing Method (TFM) imaging algorithm that enables computer assisted design of ultrasonic inspection scenarios, including the design of bespoke array configurations to match the inspection criteria. This in-house developed TFM code allows for interactive evaluation of image quality indicators of ultrasonic imaging performance when utilizing a 2D phased array working in FMC/TFM mode. The cueMAP software uses a series of TFM images to build a map of resolution, contrast and sensitivity of imaging performance of a simulated reflector, swept across the inspection volume. The software takes into account probe properties, wedge or water standoff, and effects of specimen curvature. In the validation process of this new software package, two 2D arrays have been evaluated on 304n stainless steel samples, typical of the primary circuit in nuclear plants. Thick section samples have been inspected using a 1MHz 2D matrix array. Due to the processing efficiency of the software, the data collected from these array configurations has been used to investigate the influence sub-aperture operation on inspection performance.

  16. Interplay between Ferroelastic and Metal-Insulator Phase Transitions in Strained Quasi-2D VO[subscript 2] Nanoplatelets

    SciTech Connect

    Tselev, Alexander; Strelcov, Evgheni; Luk’yanchuk, Igor A.; Budai, John D.; Tischler, Jonathan Z.; Ivanov, Ilia N.; Jones, Keith; Proksch, Roger; Kalinin, Sergei V.; Kolmakov, Aandrei

    2010-07-06

    Formation of ferroelastic twin domains in vanadium dioxide (VO{sub 2}) nanosystems can strongly affect local strain distributions, and hence couple to the strain-controlled metal-insulator transition. Here we report polarized-light optical and scanning microwave microscopy studies of interrelated ferroelastic and metal-insulator transitions in single-crystalline VO{sub 2} quasi-two-dimensional (quasi-2D) nanoplatelets (NPls). In contrast to quasi-1D single-crystalline nanobeams, the 2D geometric frustration results in emergence of several possible families of ferroelastic domains in NPls, thus allowing systematic studies of strain-controlled transitions in the presence of geometrical frustration. We demonstrate the possibility of controlling the ferroelastic domain population by the strength of the NPl-substrate interaction, mechanical stress, and by the NPl lateral size. Ferroelastic domain species and domain walls are identified based on standard group-theoretical considerations. Using variable temperature microscopy, we imaged the development of domains of metallic and semiconducting phases during the metal-insulator phase transition and nontrivial strain-driven reentrant domain formation. A long-range reconstruction of ferroelastic structures accommodating metal-insulator domain formation has been observed. These studies illustrate that a complete picture of the phase transitions in single-crystalline and disordered VO{sub 2} structures can be drawn only if both ferroelastic and metal-insulator strain effects are taken into consideration and understood.

  17. Interplay between Ferroelastic and Metal-Insulator Phase Transitions in Strained Quasi-2D VO[subscript 2] Nanoplatelets

    SciTech Connect

    Tselev, Alexander; Strelcov, Evgheni; Luk’yanchuk, Igor A.; Budai, John D.; Tischler, Jonathan Z.; Ivanov, Ilia N.; Jones, Keith; Proksch, Roger; Kalinin, Sergei V.; Kolmakov, Andrei

    2011-08-09

    Formation of ferroelastic twin domains in vanadium dioxide (VO{sub 2}) nanosystems can strongly affect local strain distributions, and hence couple to the strain-controlled metal-insulator transition. Here we report polarized-light optical and scanning microwave microscopy studies of interrelated ferroelastic and metal-insulator transitions in single-crystalline VO{sub 2} quasi-two-dimensional (quasi-2D) nanoplatelets (NPls). In contrast to quasi-1D single-crystalline nanobeams, the 2D geometric frustration results in emergence of several possible families of ferroelastic domains in NPls, thus allowing systematic studies of strain-controlled transitions in the presence of geometrical frustration. We demonstrate the possibility of controlling the ferroelastic domain population by the strength of the NPl-substrate interaction, mechanical stress, and by the NPl lateral size. Ferroelastic domain species and domain walls are identified based on standard group-theoretical considerations. Using variable temperature microscopy, we imaged the development of domains of metallic and semiconducting phases during the metal-insulator phase transition and nontrivial strain-driven reentrant domain formation. A long-range reconstruction of ferroelastic structures accommodating metal-insulator domain formation has been observed. These studies illustrate that a complete picture of the phase transitions in single-crystalline and disordered VO{sub 2} structures can be drawn only if both ferroelastic and metal-insulator strain effects are taken into consideration and understood.

  18. Quantum-dot systems prepared by 2D organization of nanoclusters preformed in the gas phase on functionalized substrates

    NASA Astrophysics Data System (ADS)

    Perez, A.; Bardotti, L.; Prevel, B.; Jensen, P.; Treilleux, M.; Mélinon, P.; Gierak, J.; Faini, G.; Mailly, D.

    2002-10-01

    The low-energy cluster beam deposition (LECBD) technique is used to deposit gold nanoclusters preformed in the gas phase on functionalized graphite substrates (highly oriented pyrolitic graphite (HOPG)), to prepare 2D-organized arrays of cluster assembled dots. Functionalized HOPG substrates are obtained using the focused ion beam (FIB) nanoengraving technique to pattern 2D-organized arrays of defects (nanoholes, nanobumps) which act as traps for the diffusing clusters. Depending on the deposition conditions (nature, size and fluence of the deposited clusters) and the functionalized substrates (nature and size of the FIB-induced defects, geometry of the 2D array of defects and temperature during deposition) high-quality quantum-dot arrays can be obtained with well controlled and reproducible morphologies. Kinetic Monte Carlo simulations of the cluster deposition experiments on functionalized substrates allow us to obtain quite good fits of the experimental images performed by tapping mode atomic force microscopy (TMAFM), leading to systematic investigations of the best conditions to realize high-quality quantum dots systems. This combined top-down-bottom-up approach (LECBD-FIB) seems a promising method for preparing high-integration-density devices (~Tbit cm-2) well suited for future applications to data storage, nanoelectronics, nano-optics, nanomagnetic systems.

  19. Graphene and graphene-like 2D materials for optical biosensing and bioimaging: a review

    NASA Astrophysics Data System (ADS)

    Zhu, Chengzhou; Du, Dan; Lin, Yuehe

    2015-09-01

    The increasing demands of bioassay and biomedical applications have significantly promoted the rational design and fabrication of a wide range of functional nanomaterials. Coupling these advanced nanomaterials with biomolecule recognition events leads to novel sensing and diagnostic platforms. Because of their unique structures and multifunctionalities, two-dimensional nanomaterials, such as graphene and graphene-like materials (e.g., graphitic carbon nitride, transition metal dichalcogenides, boron nitride, and transition metal oxides), have stimulated great interest in the field of optical biosensors and imaging because of their innovative mechanical, physicochemical and optical properties. Depending on the different applications, the graphene and graphene-like nanomaterials can be tailored to form either fluorescent emitters or efficient fluorescence quenchers, making them powerful platforms for fabricating a series of optical biosensors to sensitively detect various targets including ions, small biomolecules, DNA/RNA and proteins. This review highlights the recent progress in optical biosensors based on graphene and graphene-like 2D materials and their imaging applications. Finally, the opportunities and some critical challenges in this field are also addressed.

  20. Low-frequency phased-array 2D fluorescence localization in breast cancer detection

    NASA Astrophysics Data System (ADS)

    Liu, Qian; Chen, Yu; Chance, Britton; Luo, Qingming

    2003-12-01

    A method for rapid, non-invasive 2D fluorescence localization of breast cancer using low frequency phased array near-infrared technique is presented in this article. In our study, we have developed a dual-channel fluorescence detection system to locate breast cancer. This system consists two pair of in-phase and out-of-phase light emitting diodes (LEDs) as the light sources and Photomultiplier Tube (PMT) as the detector. Two null planes generated by cancellation of diffusion photon density waves (DPDW) will indicate the 2D position of breast cancer with exogenous contrast agents. The fluorescent contrast agent used in this study is Indocyanine Green (ICG) and the minimum amount of ICG detected by our system is 0.5 μM. With the 2 cm separation of sources and detector, the maximum depth our system can detect is 10 mm. The whole system is in compact size and portable. Phantom experiments show that the system can provide real time detection and localization of small hidden absorbing-fluorescent objects inside the highly scattering medium with high accuracy of +/-3 mm. The potential application is that it is low-cost and can be used for breast cancer localization as operation aid and self-examination.

  1. Stability of superfluid phases in the 2D spin-polarized attractive Hubbard model

    NASA Astrophysics Data System (ADS)

    Kujawa-Cichy, A.; Micnas, R.

    2011-08-01

    We study the evolution from the weak coupling (BCS-like limit) to the strong coupling limit of tightly bound local pairs (LPs) with increasing attraction, in the presence of the Zeeman magnetic field (h) for d=2, within the spin-polarized attractive Hubbard model. The broken symmetry Hartree approximation as well as the strong coupling expansion are used. We also apply the Kosterlitz-Thouless (KT) scenario to determine the phase coherence temperatures. For spin-independent hopping integrals (t↑=t↓), we find no stable homogeneous polarized superfluid (SCM) state in the ground state for the strong attraction and obtain that for a two-component Fermi system on a 2D lattice with population imbalance, phase separation (PS) is favoured for a fixed particle concentration, even on the LP (BEC) side. We also examine the influence of spin-dependent hopping integrals (mass imbalance) on the stability of the SCM phase. We find a topological quantum phase transition (Lifshitz type) from the unpolarized superfluid phase (SC0) to SCM and tricritical points in the h-|U| and t↑/t↓-|U| ground-state phase diagrams. We also construct the finite temperature phase diagrams for both t↑=t↓ and t↑≠t↓ and analyze the possibility of occurrence of a spin-polarized KT superfluid.

  2. CHEM2D: a two-dimensional, three-phase, nine-component chemical flood simulator. Volume I. CHEM2D technical description and FORTRAN code

    SciTech Connect

    Fanchi, J.R.

    1985-04-01

    Under the sponsorship of the US Department of Energy, a publicly available chemical simulator has been evaluated and substantially enhanced to serve as a useful tool for projecting polymer or chemical flood performance. The program, CHEM2D, is a two-dimensional, three-phase, nine-component finite-difference numerical simulator. It can model primary depletion, waterfloods, polymer floods, and micellar/polymer floods using heterogeneous linear, areal, or cross-sectional reservoir descriptions. The user may specify well performance as either pressure or rate constrained. Both a constant time step size and a variable time step size based on extrapolation of concentration changes are available as options. A solution technique which is implicit in pressure and explicit in saturations and concentrations is used. The major physical mechanisms that are modeled include adsorption, capillary trapping, cation exchange, dilution, dispersion, interfacial tension, binary or ternary phase behavior, non-Newtonian polymer rheology, and two-phase or three-phase relative permeability. Typical components include water, oil, surfactant, polymer, and three ions (chloride, calcium, and sodium). Components may partition amongst the aqueous, oleic, and microemulsion phases. Volume I of this report provides a discussion of the formulation and algorithms used within CHEM2D. Included in Volume I are a number of validation and illustrative examples, as well as the FORTRAN code. The CHEM2D user's manual, Volume II, contains both the input data sets for the examples presented in Volume I and an example output. All appendices and a phase behavior calculation program are collected in Volume III. 20 references.

  3. Interferometric Approach to Measuring Band Topology in 2D Optical Lattices

    NASA Astrophysics Data System (ADS)

    Abanin, Dmitry A.; Kitagawa, Takuya; Bloch, Immanuel; Demler, Eugene

    2013-04-01

    Recently, optical lattices with nonzero Berry’s phases of Bloch bands have been realized. New approaches for measuring Berry’s phases and topological properties of bands with experimental tools appropriate for ultracold atoms need to be developed. In this Letter, we propose an interferometric method for measuring Berry’s phases of two-dimensional Bloch bands. The key idea is to use a combination of Ramsey interference and Bloch oscillations to measure Zak phases, i.e., Berry’s phases for closed trajectories corresponding to reciprocal lattice vectors. We demonstrate that this technique can be used to measure the Berry curvature of Bloch bands, the π Berry’s phase of Dirac points, and the first Chern number of topological bands. We discuss several experimentally feasible realizations of this technique, which make it robust against low-frequency magnetic noise.

  4. Refractive effects on optical measurement of alveolar volume: a 2-D ray-tracing approach.

    PubMed

    Golabchi, Fatemeh N; Brooks, Dana H; Gouldstone, Andrew; DiMarzio, Charles A

    2011-01-01

    Lung imaging and assessment of alveoli geometry in the lung tissue is of great importance. Optical coherence tomography (OCT) is a real-time imaging technique used for this purpose, based on near-infrared interferometry, that can image several layers of distal alveoli in the lung tissue. The OCT measurements use low coherence interferometry, where light reflections from surfaces in the tissue are used to construct 2D images of the tissue. OCT images provide better depth compared to other optical microscopy techniques such as confocal reflectance and two-photon microscopy. Therefore, it is important to detect and verify optical distortions that happens with OCT, including refractive effect at the tissue-air alveoli wall interface which is not taken into account in the OCT imaging model. In this paper, the refractive effect at the tissue-air interface of the alveoli wall is modeled using exact ray tracing and direct implementation of Snell's law, and differences between alveoli area computed from OCT imaging and those measured by exact ray tracing of the OCT signal are analyzed.

  5. Optical Signatures from Magnetic 2-D Electron Gases in High Magnetic Fields to 60 Tesla

    SciTech Connect

    Crooker, S.A.; Kikkawa, J.M.; Awschalom, D.D.; Smorchikova, I.P.; Samarth, N.

    1998-11-08

    We present experiments in the 60 Tesla Long-Pulse magnet at the Los Alamos National High Magnetic Field Lab (NHMFL) focusing on the high-field, low temperature photoluminescence (PL) from modulation-doped ZnSe/Zn(Cd,Mn)Se single quantum wells. High-speed charge-coupled array detectors and the long (2 second) duration of the magnet pulse permit continuous acquisition of optical spectra throughout a single magnet shot. High-field PL studies of the magnetic 2D electron gases at temperatures down to 350mK reveal clear intensity oscillations corresponding to integer quantum Hall filling factors, from which we determine the density of the electron gas. At very high magnetic fields, steps in the PL energy are observed which correspond to the partial unlocking of antiferromagnetically bound pairs of Mn2+ spins.

  6. Optical and electrical study of organic solar cells with a 2D grating anode.

    PubMed

    Sha, Wei E I; Choy, Wallace C H; Wu, Yumao; Chew, Weng Cho

    2012-01-30

    We investigate both optical and electrical properties of organic solar cells (OSCs) incorporating 2D periodic metallic back grating as an anode. Using a unified finite-difference approach, the multiphysics modeling framework for plasmonic OSCs is established to seamlessly connect the photon absorption with carrier transport and collection by solving the Maxwell's equations and semiconductor equations (Poisson, continuity, and drift-diffusion equations). Due to the excited surface plasmon resonance, the significantly nonuniform and extremely high exciton generation rate near the metallic grating are strongly confirmed by our theoretical model. Remarkably, the nonuniform exciton generation indeed does not induce more recombination loss or smaller open-circuit voltage compared to 1D multilayer standard OSC device. The increased open-circuit voltage and reduced recombination loss by the plasmonic OSC are attributed to direct hole collections at the metallic grating anode with a short transport path. The work provides an important multiphysics understanding for plasmonic organic photovoltaics.

  7. Backscattering from a statistically rough 2-D surface: Diffraction corrections to geometrical optics cross sections

    NASA Astrophysics Data System (ADS)

    Fuks, Iosif M.

    2007-12-01

    Diffraction corrections (up to terms ˜1/k2) to the geometric optics backscattering cross sections from a statistically rough 2-D perfectly conducting surface were derived for TE- and TM-polarized electromagnetic waves based on the high-frequency asymptotic expansions of electric and magnetic fields at the surface obtained by Fuks (2004). It was shown that at steep incident angles, where the specular reflections play the main part in scattering, diffraction results can be interpreted as scattering by a fictitious surface, the roughness of which is gentler that the real surface at HH polarization and steeper at VV polarization. The HH/VV polarization ratio (dB), being positive at steep incident angles, gradually decreases as the incident angle increases, and it becomes negative for moderate incident angles.

  8. Titanium trisulfide (TiS3): a 2D semiconductor with quasi-1D optical and electronic properties

    NASA Astrophysics Data System (ADS)

    Island, Joshua O.; Biele, Robert; Barawi, Mariam; Clamagirand, José M.; Ares, José R.; Sánchez, Carlos; van der Zant, Herre S. J.; Ferrer, Isabel J.; D’Agosta, Roberto; Castellanos-Gomez, Andres

    2016-03-01

    We present characterizations of few-layer titanium trisulfide (TiS3) flakes which, due to their reduced in-plane structural symmetry, display strong anisotropy in their electrical and optical properties. Exfoliated few-layer flakes show marked anisotropy of their in-plane mobilities reaching ratios as high as 7.6 at low temperatures. Based on the preferential growth axis of TiS3 nanoribbons, we develop a simple method to identify the in-plane crystalline axes of exfoliated few-layer flakes through angle resolved polarization Raman spectroscopy. Optical transmission measurements show that TiS3 flakes display strong linear dichroism with a magnitude (transmission ratios up to 30) much greater than that observed for other anisotropic two-dimensional (2D) materials. Finally, we calculate the absorption and transmittance spectra of TiS3 in the random-phase-approximation (RPA) and find that the calculations are in qualitative agreement with the observed experimental optical transmittance.

  9. Titanium trisulfide (TiS3): a 2D semiconductor with quasi-1D optical and electronic properties

    PubMed Central

    Island, Joshua O.; Biele, Robert; Barawi, Mariam; Clamagirand, José M.; Ares, José R.; Sánchez, Carlos; van der Zant, Herre S. J.; Ferrer, Isabel J.; D’Agosta, Roberto; Castellanos-Gomez, Andres

    2016-01-01

    We present characterizations of few-layer titanium trisulfide (TiS3) flakes which, due to their reduced in-plane structural symmetry, display strong anisotropy in their electrical and optical properties. Exfoliated few-layer flakes show marked anisotropy of their in-plane mobilities reaching ratios as high as 7.6 at low temperatures. Based on the preferential growth axis of TiS3 nanoribbons, we develop a simple method to identify the in-plane crystalline axes of exfoliated few-layer flakes through angle resolved polarization Raman spectroscopy. Optical transmission measurements show that TiS3 flakes display strong linear dichroism with a magnitude (transmission ratios up to 30) much greater than that observed for other anisotropic two-dimensional (2D) materials. Finally, we calculate the absorption and transmittance spectra of TiS3 in the random-phase-approximation (RPA) and find that the calculations are in qualitative agreement with the observed experimental optical transmittance. PMID:26931161

  10. Dynamic molecular structure and phase diagram of DPPC-cholesterol binary mixtures: a 2D-ELDOR study.

    PubMed

    Chiang, Yun-Wei; Costa-Filho, Antonio J; Freed, Jack H

    2007-09-27

    This paper is an application of 2D electron-electron double resonance (2D-ELDOR) with the "full Sc- method" to study model membranes. We obtain and confirm the phase diagram of 1,2-dipalmitoyl-sn-glycerophosphatidylcholine (DPPC)-cholesterol binary mixtures versus temperature and provide quantitative descriptions for its dynamic molecular structure using 2D-ELDOR at the Ku band. The spectra from the end-chain 16-PC spin label in multilamellar phospholipid vesicles are obtained for cholesterol molar concentrations ranging from 0 to 50% and from 25 to 60 degrees C. This phase diagram consists of liquid-ordered, liquid-disordered, and gel phases and phase coexistence regions. The phase diagram is carefully examined according to the spectroscopic evidence, and the rigorous interpretation for the line shape changes. We show that the 2D-ELDOR spectra differ markedly with variation in the composition. The extensive line shape changes in the 2D-plus-mixing-time representation provide useful information to define and characterize the membrane phases with respect to their dynamic molecular structures and to determine the phase boundaries. The homogeneous T2's are extracted from the pure absorption spectra and are used to further distinguish the membrane phases. These results show 2D-ELDOR to be naturally suitable for probing and reporting the dynamic structures of microdomains in model membrane systems and, moreover, providing a very detailed picture of their molecular dynamic structure, especially with the aid of the "full Sc- method".

  11. Simulating ultrasound fields for 2D phased-array probes design optimization.

    PubMed

    Matrone, Giulia; Quaglia, Fabio; Magenes, Giovanni

    2011-01-01

    Nowadays, ultrasound diagnostic imaging is one of the non-invasive techniques mostly used in the clinical practice. Recent advances in this field have brought to the development of small and portable systems. New bidimensional probes consisting of 2D phased arrays, allow to obtain real-time 3D representations of moving organs and blood vessels anatomy. Being the complexity of such 4D ultrasound imaging systems significantly increased, new challenges concerning electronics integration arise for designers. In this paper a software simulator is described, which has been developed in order to model ultrasound wave generation, pressure field distribution and echoes reception, with the aim to become a useful tool for optimizing the probe design. The paper mainly focuses on linear ultrasound field modeling; preliminary results on non-linear interactions with contrast agents are also here introduced.

  12. Melting in 2D Lennard-Jones Systems: What Type of Phase Transition?

    SciTech Connect

    Patashinski, Alexander Z.; Orlik, Rafal; Mitus, Antonio C.; Grzybowski, Bartosz A.; Ratner, Mark A.

    2010-12-09

    A typical configuration of an equilibrium 2D system of 2500 Lennard-Jones particles at melting is found to be a mosaic of crystallites and amorphous clusters. This mosaic significantly changed at times around the period τ of local vibrations, while most particles retain their nearest neighbors for times much longer than τ. In a system of 2500 particles, we found no phase separation for length scales larger than that of a crystallite. With decreasing density, the number of small amorphous clusters increased, and proliferation and percolation of amorphous matter separated the crystalline-ordered parts so that correlations between local order orientations of remote crystallites disappeared. We suggest that the mosaic is a manifestation of diminished stability of the crystalline structure resulting from competition between attraction and repulsion forces.

  13. 2D-Visualization of metabolic activity with planar optical chemical sensors (optodes)

    NASA Astrophysics Data System (ADS)

    Meier, R. J.; Liebsch, G.

    2015-12-01

    Microbia plays an outstandingly important role in many hydrologic compartments, such as e.g. the benthic community in sediments, or biologically active microorganisms in the capillary fringe, in ground water, or soil. Oxygen, pH, and CO2 are key factors and indicators for microbial activity. They can be measured using optical chemical sensors. These sensors record changing fluorescence properties of specific indicator dyes. The signals can be measured in a non-contact mode, even through transparent walls, which is important for many lab-experiments. They can measure in closed (transparent) systems, without sampling or intruding into the sample. They do not consume the analytes while measuring, are fully reversible and able to measure in non-stirred solutions. These sensors can be applied as high precision fiberoptic sensors (for profiling), robust sensor spots, or as planar sensors for 2D visualization (imaging). Imaging enables to detect thousands of measurement spots at the same time and generate 2D analyte maps over a region of interest. It allows for comparing different regions within one recorded image, visualizing spatial analyte gradients, or more important to identify hot spots of metabolic activity. We present ready-to-use portable imaging systems for the analytes oxygen, pH, and CO2. They consist of a detector unit, planar sensor foils and a software for easy data recording and evaluation. Sensors foils for various analytes and measurement ranges enable visualizing metabolic activity or analyte changes in the desired range. Dynamics of metabolic activity can be detected in one shot or over long time periods. We demonstrate the potential of this analytical technique by presenting experiments on benthic disturbance-recovery dynamics in sediments and microbial degradation of organic material in the capillary fringe. We think this technique is a new tool to further understand how microbial and geochemical processes are linked in (not solely) hydrologic

  14. 2D focal-field aberration dependence on time/phase screen position and correlation lengths

    NASA Astrophysics Data System (ADS)

    Näsholm, Sven Peter

    2004-05-01

    For high-frequency annular array transducers used in medical ultrasound imaging, aberrations due to tissue and body wall have a significant effect on energy transfer from the main lobe to the sidelobes of the acoustic field: that is, the aberrations make the total sidelobe level increase. This effect makes the ultrasound image poor when imaging heterogeneous organs. This study performs an analysis of the focal-field quality as a function of time/phase screen z position and time/phase screen correlation length. It establishes some rules of thumb which indicate when the focal-field sidelobe energy is at its highest. It also introduces a simple screen-scaling model which is useful as long as the screen position is not closer to the focus than a certain limit distance. The scaling model allows the real screen at a depth z=zscreen to be treated as a scaled screen at the position z=ztransd. 2D sound fields after 3D propagation from the annular arrays to the focal plane have been simulated using an angular spectrum method. The aberrators are represented by amplitude and phase/time screens.

  15. Magnetic phase diagram of quasi-2D quantum Heisenberg antiferromagnets with XY anisotropy

    NASA Astrophysics Data System (ADS)

    Xiao, Fan; Landee, Christopher; Turnbull, Mark; Fortune, Nathanael; Hannahs, Scott

    2012-02-01

    The magnetic phase diagram of a quasi-2D quantum Heisenberg antiferromagnetic compound Cu(pz)2(ClO4)2 [1] has been determined by experimental measurements; TN shows a strong field dependence. The data reveal the presence of a small (0.5%) amount of XY anisotropy. QMC simulations have been performed to examine the role of the anisotropy and the interlayer exchange (') upon the phase diagram [2,3]. Comparison of the QMC results with the experimental phase diagram will be presented. [4pt] [1] F. Xiao, F. M. Woodward, C. P. Landee, M. M. Turnbull, C. Mielke, N. Harrison, T. Lancaster, S. J. Blundell, P. J. Baker, P. Babkevich, and F. L. Pratt. Phys. Rev. B, 79(13): 134412 (2009) [0pt] [2] A. Cuccoli, T. Roscilde, R. Vaia, and P. Verrucchi. Phys. Rev. B, 68(6):060402 (2003). [0pt] [3] A. Cuccoli, T. Roscilde, R. Vaia, and P. Verrucchi. Phys. Rev. Lett., 90(16): 167205 (2003).

  16. Prestack depth migration for complex 2D structure using phase-screen propagators

    SciTech Connect

    Roberts, P.; Huang, Lian-Jie; Burch, C.; Fehler, M.; Hildebrand, S.

    1997-11-01

    We present results for the phase-screen propagator method applied to prestack depth migration of the Marmousi synthetic data set. The data were migrated as individual common-shot records and the resulting partial images were superposed to obtain the final complete Image. Tests were performed to determine the minimum number of frequency components required to achieve the best quality image and this in turn provided estimates of the minimum computing time. Running on a single processor SUN SPARC Ultra I, high quality images were obtained in as little as 8.7 CPU hours and adequate images were obtained in as little as 4.4 CPU hours. Different methods were tested for choosing the reference velocity used for the background phase-shift operation and for defining the slowness perturbation screens. Although the depths of some of the steeply dipping, high-contrast features were shifted slightly the overall image quality was fairly insensitive to the choice of the reference velocity. Our jests show the phase-screen method to be a reliable and fast algorithm for imaging complex geologic structures, at least for complex 2D synthetic data where the velocity model is known.

  17. Phase-preserved optical elevator

    PubMed Central

    Luo, Yuan; Zhang, Baile; Han, Tiancheng; Chen, Zhi; Duan, Yubo; Chu, Chia-Wei; Barbastathis, George; Qiu, Cheng Wei

    2013-01-01

    The unique superiority of transformation optics devices designed from coordinate transformation is their capability of recovering both ray trajectory and optical path length in light manipulation. However, very few experiments have been done so far to verify this dual-recovery property from viewpoints of both ray trajectory and optical path length simultaneously. The experimental difficulties arise from the fact that most previous optical transformation optics devices only work at the nano-scale; the lack of intercomparison between data from both optical path length and ray trajectory measurement in these experiments obscured the fact that the ray path was subject to a subwavelength lateral shift that was otherwise not easily perceivable and, instead, was pointed out theoretically [B. Zhang et al. Phys. Rev. Lett. 104, 233903, (2010)]. Here, we use a simple macroscopic transformation optics device of phase-preserved optical elevator, which is a typical birefringent optical phenomenon that can virtually lift an optical image by a macroscopic distance, to demonstrate decisively the unique optical path length preservation property of transformation optics. The recovery of ray trajectory is first determined with no lateral shift in the reflected ray. The phase preservation is then verified with incoherent white-light interferometry without ambiguity and phase unwrapping. PMID:23546046

  18. Compact optical microfiber phase modulator.

    PubMed

    Zhang, Xueliang; Belal, M; Chen, G Y; Song, Zhangqi; Brambilla, G; Newson, T P

    2012-02-01

    A compact optical microfiber phase modulator with MHz bandwidth is presented. A micrometer-diameter microfiber is wound on a millimeter-diameter piezoelectric ceramic rod with two electrodes. When a voltage is applied to the piezoelectric ceramic, the rod is strained, leading to a phase change along the microfiber; because of the small size, the optical microfiber phase modulator can have as high as a few MHz bandwidth response.

  19. Addressable, large-field second harmonic generation microscopy based on 2D acousto-optical deflector and spatial light modulator.

    PubMed

    Shao, Yonghong; Liu, Honghai; Qin, Wan; Qu, Junle; Peng, Xiang; Niu, Hanben; Gao, Bruce Z

    2012-09-01

    We present an addressable, large-field second harmonic generation microscope by combining a 2D acousto-optical deflector with a spatial light modulator. The SLM shapes an incoming mode-locked, near-infrared Ti:Sapphire laser beam into a multifocus array, which can be rapidly scanned by changing the incident angle of the laser beam using a 2D acousto-optical deflector. Compared to the single-beam-scan technique, the multifocus array scan can increase the scanning rate and the field-of-view size with the multi-region imaging ability.

  20. Addressable, large-field second harmonic generation microscopy based on 2D acousto-optical deflector and spatial light modulator

    PubMed Central

    Shao, Yonghong; Liu, Honghai; Qin, Wan; Qu, Junle; Peng, Xiang; Niu, Hanben

    2013-01-01

    We present an addressable, large-field second harmonic generation microscope by combining a 2D acousto-optical deflector with a spatial light modulator. The SLM shapes an incoming mode-locked, near-infrared Ti:Sapphire laser beam into a multifocus array, which can be rapidly scanned by changing the incident angle of the laser beam using a 2D acousto-optical deflector. Compared to the single-beam-scan technique, the multifocus array scan can increase the scanning rate and the field-of-view size with the multi-region imaging ability. PMID:24307756

  1. Wide Angle Liquid Crystal Optical Phased Array

    NASA Technical Reports Server (NTRS)

    Wang, Xing-Hua; Wang, Bin; Bos, Philip J.; Anderson, James E.; Pouch, John J.; Miranda, Felix A.; McManamon, Paul F.

    2004-01-01

    Accurate modeling of a high resolution, liquid crystal (LC) based, optical phased array (OPA) is shown. The simulation shows excellent agreement with a test 2-D LC OPA. The modeling method is extendable to cases where the array element size is close to the wavelength of light. The fringing fields of such a device are first studied, and subsequently reduced. This results in a device that demonstrates plus or minus 7.4 degrees of continuous beam steering at a wavelength of 1550 nm, and a diffraction efficiency (DE) higher than 72%.

  2. Optical contrast of 2D InSe on SiO2/Si and transparent substrates using bandpass filters.

    PubMed

    Brotons-Gisbert, M; Andres-Penares, D; Martínez-Pastor, J P; Cros, A; Sánchez-Royo, J F

    2017-03-17

    The particular optical and electronic properties recently reported for 2D InSe depict this 2D material as being very versatile for future electronic and optoelectronic devices with tunable and optimized functionalities. For its fundamental study and the development of practical applications, rapid and accurate identification methods of atomically thin InSe are essential. Here, we demonstrate an enhancement of the optical contrast between InSe nanosheets and the underlying SiO2/Si substrate by illuminating with a 40 nm wide bandpass filter centered at 500 nm. Moreover, we study the optical contrast of 2D InSe on transparent substrates. Our results suggest that a good optical contrast is achieved for transparent substrates with low real refractive indices such as LiF or a viscoelastic polydimethylsiloxane stamp. In this case, an optimum optical contrast would be achieved by using a bandpass filter centered at 450 nm. These results can be very useful for speeding up the continuously growing research on 2D InSe and its applications.

  3. Optical contrast of 2D InSe on SiO2/Si and transparent substrates using bandpass filters

    NASA Astrophysics Data System (ADS)

    Brotons-Gisbert, M.; Andres-Penares, D.; Martínez-Pastor, J. P.; Cros, A.; Sánchez-Royo, J. F.

    2017-03-01

    The particular optical and electronic properties recently reported for 2D InSe depict this 2D material as being very versatile for future electronic and optoelectronic devices with tunable and optimized functionalities. For its fundamental study and the development of practical applications, rapid and accurate identification methods of atomically thin InSe are essential. Here, we demonstrate an enhancement of the optical contrast between InSe nanosheets and the underlying SiO2/Si substrate by illuminating with a 40 nm wide bandpass filter centered at 500 nm. Moreover, we study the optical contrast of 2D InSe on transparent substrates. Our results suggest that a good optical contrast is achieved for transparent substrates with low real refractive indices such as LiF or a viscoelastic polydimethylsiloxane stamp. In this case, an optimum optical contrast would be achieved by using a bandpass filter centered at 450 nm. These results can be very useful for speeding up the continuously growing research on 2D InSe and its applications.

  4. Surface wave phase velocities from 2-D surface wave tomography studies in the Anatolian plate

    NASA Astrophysics Data System (ADS)

    Arif Kutlu, Yusuf; Erduran, Murat; Çakır, Özcan; Vinnik, Lev; Kosarev, Grigoriy; Oreshin, Sergey

    2014-05-01

    We study the Rayleigh and Love surface wave fundamental mode propagation beneath the Anatolian plate. To examine the inter-station phase velocities a two-station method is used along with the Multiple Filter Technique (MFT) in the Computer Programs in Seismology (Herrmann and Ammon, 2004). The near-station waveform is deconvolved from the far-station waveform removing the propagation effects between the source and the station. This method requires that the near and far stations are aligned with the epicentre on a great circle path. The azimuthal difference of the earthquake to the two-stations and the azimuthal difference between the earthquake and the station are restricted to be smaller than 5o. We selected 3378 teleseismic events (Mw >= 5.7) recorded by 394 broadband local stations with high signal-to-noise ratio within the years 1999-2013. Corrected for the instrument response suitable seismogram pairs are analyzed with the two-station method yielding a collection of phase velocity curves in various period ranges (mainly in the range 25-185 sec). Diffraction from lateral heterogeneities, multipathing, interference of Rayleigh and Love waves can alter the dispersion measurements. In order to obtain quality measurements, we select only smooth portions of the phase velocity curves, remove outliers and average over many measurements. We discard these average phase velocity curves suspected of suffering from phase wrapping errors by comparing them with a reference Earth model (IASP91 by Kennett and Engdahl, 1991). The outlined analysis procedure yields 3035 Rayleigh and 1637 Love individual phase velocity curves. To obtain Rayleigh and Love wave travel times for a given region we performed 2-D tomographic inversion for which the Fast Marching Surface Tomography (FMST) code developed by N. Rawlinson at the Australian National University was utilized. This software package is based on the multistage fast marching method by Rawlinson and Sambridge (2004a, 2004b). The

  5. Creation of quantum-degenerate gases of ytterbium in a compact 2D-/3D-magneto-optical trap setup

    SciTech Connect

    Doerscher, Soeren; Thobe, Alexander; Hundt, Bastian; Kochanke, Andre; Le Targat, Rodolphe; Windpassinger, Patrick; Becker, Christoph; Sengstock, Klaus

    2013-04-15

    We report on the first experimental setup based on a 2D-/3D-magneto-optical trap (MOT) scheme to create both Bose-Einstein condensates and degenerate Fermi gases of several ytterbium isotopes. Our setup does not require a Zeeman slower and offers the flexibility to simultaneously produce ultracold samples of other atomic species. Furthermore, the extraordinary optical access favors future experiments in optical lattices. A 2D-MOT on the strong {sup 1}S{sub 0}{yields}{sup 1}P{sub 1} transition captures ytterbium directly from a dispenser of atoms and loads a 3D-MOT on the narrow {sup 1}S{sub 0}{yields}{sup 3}P{sub 1} intercombination transition. Subsequently, atoms are transferred to a crossed optical dipole trap and cooled evaporatively to quantum degeneracy.

  6. Integrated optical phase locked loop.

    SciTech Connect

    Lentine, Anthony L.; Kim, Jungwon; Trotter, Douglas Chandler; DeRose, Christopher T.; Kartner, Franz X.; Byun, Hyunil; Nejadmalayeri, Amir H.; Watts, Michael R.; Zortman, William A.

    2010-12-01

    A silicon photonics based integrated optical phase locked loop is utilized to synchronize a 10.2 GHz voltage controlled oscillator with a 509 MHz mode locked laser, achieving 32 fs integrated jitter over 300 kHz bandwidth.

  7. Face recognition based on the band fusion of generalized phase spectrum of 2D-FrFT

    NASA Astrophysics Data System (ADS)

    Wang, Xu; Qi, Lin; Tie, Yun; Chen, Enqing; Sun, Huijing

    2017-02-01

    In this paper, we propose a novel feature extraction method for face recognition based on two dimensional fractional Fourier transform (2D-FrFT). First, we extract the phase information of facial image in 2D-FrFT, which is called the generalized phase spectra (GPS). Then, we present an improved two-dimensional separability judgment (I2DSJ) to select appropriate order parameters for discrete fractional Fourier transform. Finally, multiple orders' generalized phase spectrum bands (MGPSB) fusion is proposed. In order to make full use of the discriminative information from different orders for face recognition, the proposed approach merges different orders' generalized phase spectra (GPS) of 2D-FrFT. The proposed method is no need to construct the subspace through the feature extraction methods and has less computation cost. Experimental results on the public face databases demonstrate that our method outperforms the representative methods.

  8. Hydrogen-bonding-induced polymorphous phase transitions in 2D organic nanostructures.

    PubMed

    Xu, Li; Miao, Xinrui; Zha, Bao; Deng, Wenli

    2013-05-01

    The 2D self-assembly of various 2-hydroxy-7-alkoxy-9-fluorenone (HAF) molecules has been investigated by scanning tunneling microscopy (STM) at the liquid/solid interface. A systematic study revealed that HAF molecules with different numbers of carbon atoms in their alkoxy chains could form two or three different kinds of nanostructures, that is, less-ordered, flower-like, and zig-zag patterns, owing to the formation of different types of intermolecular hydrogen bonds. The observed structural transition was found to be driven by molecular thermodynamics, surface diffusion, and the voltage pulse that was applied to the STM tip. The zig-zag pattern was the most stable of these configurations. An odd-even effect on the flower-like structure, as induced by the odd and even number of carbon atoms in the side chain, was observed by STM. The influence of the odd-even effect on the melting point has a close relationship with the molecular self-assembled pattern. Our results are significant for understanding the influence of hydrogen-bonding interactions on the dominant adsorption behavior on the surface and provide a new visual approach for observing the influence of the odd-even effect on the phase transition.

  9. Topologically induced swarming phase transition on a 2D percolated lattice

    NASA Astrophysics Data System (ADS)

    Quint, David A.; Gopinathan, Ajay

    2015-07-01

    The emergence of collective motion, or swarming, in groups of moving individuals who orient themselves using only information from their neighbors is a very general phenomenon that occurs at multiple spatio-temporal scales. Swarms that occur in natural environments typically have to contend with spatial disorder such as obstacles that can hinder an individual’s motion or can disrupt communication with neighbors. We study swarming agents, possessing both aligning and mutually avoiding repulsive interactions, in a 2D percolated network representing a topologically disordered environment. We numerically find a phase transition from a collectively moving swarm to a disordered gas-like state above a critical value of the topological or environmental disorder. For agents that utilize only alignment interactions, we find that the swarming transition does not exist in the large system size limit, while the addition of a mutually repulsive interaction can restore the existence of the transition at a finite critical value of disorder. We find there is a finite range of topological disorder where swarming can occur and that this range can be maximized by an optimal amount of mutual repulsion.

  10. Sparsity and level set regularization for diffuse optical tomography using a transport model in 2D

    NASA Astrophysics Data System (ADS)

    Prieto, Kernel; Dorn, Oliver

    2017-01-01

    In this paper we address an inverse problem for the time-dependent linear transport equation (or radiative transfer equation) in 2D having in mind applications in diffuse optical tomography (DOT). We propose two new reconstruction algorithms which so far have not been applied to such a situation and compare their performances in certain practically relevant situations. The first of these reconstruction algorithms uses a sparsity promoting regularization scheme, whereas the second one uses a simultaneous level set reconstruction scheme for two parameters of the linear transport equation. We will also compare the results of both schemes with a third scheme which is a more traditional L 2-based Landweber-Kaczmarz scheme. We focus our attention on the DOT application of imaging the human head of a neonate where the simpler diffusion approximation is not well-suited for the inversion due to the presence of a clear layer beneath the skull which is filled with ‘low-scattering’ cerebrospinal fluid. This layer, even if its location and characteristics are known a priori, poses significant difficulties for most reconstruction schemes due to its ‘wave-guiding’ property which reduces sensitivity of the data to the interior regions. A further complication arises due to the necessity to reconstruct simultaneously two different parameters of the linear transport equation, the scattering and the absorption cross-section, from the same data set. A significant ‘cross-talk’ between these two parameters is usually expected. Our numerical experiments indicate that each of the three considered reconstruction schemes do have their merits and perform differently but reasonably well when the clear layer is a priori known. We also demonstrate the behavior of the three algorithms in the particular situation where the clear layer is unknown during the reconstruction.

  11. Parametric phase information based 2D Cepstrum PSF estimation method for blind de-convolution of ultrasound imaging

    NASA Astrophysics Data System (ADS)

    Kang, Jooyoung; Park, Sung-Chan; Kim, Jung-ho; Song, Jongkeun

    2014-02-01

    In the ultrasound imaging system, blurring which occurs after passing through ultrasound scanner system, represents point spread function (PSF) that describes the response of the ultrasound imaging system to a point source distribution. So, de-blurring can be achieved by de-convolving the ultrasound images with an estimated of corresponding PSF. However, it is hard to attain an accurate estimation of PSF due to the unknown properties of the tissues of the human body through the ultrasound signal propagates. In this paper, we present a new method for PSF estimation in the Fourier domain (FD) based on parametric minimum phase information, and simultaneously, it performs fast 2D de-convolution in the ultrasound imaging system. Although most of complex cepstrum methods [14], are obtained using complex 2D phase unwrapping [18] [19] in order to estimate the FD-phase information of PSF, our algorithm estimates the 2D PSF using 2D FD-phase information with the parametric weighting factor α and β. They affect the feature of PSF shapes.This makes the computations much simpler and the estimation more accurate. Our algorithm works on the beam-formed uncompressed radio-frequency data, with pre-measured and estimated 2D PSFs database from actual probe used. We have tested our algorithm with vera-sonic system and commercial ultrasound scanner (Philips C4-2), in known speed of sound phantoms and unknown speeds in vivo scans.

  12. Phase in Optical Image Processing

    NASA Astrophysics Data System (ADS)

    Naughton, Thomas J.

    2010-04-01

    The use of phase has a long standing history in optical image processing, with early milestones being in the field of pattern recognition, such as VanderLugt's practical construction technique for matched filters, and (implicitly) Goodman's joint Fourier transform correlator. In recent years, the flexibility afforded by phase-only spatial light modulators and digital holography, for example, has enabled many processing techniques based on the explicit encoding and decoding of phase. One application area concerns efficient numerical computations. Pushing phase measurement to its physical limits, designs employing the physical properties of phase have ranged from the sensible to the wonderful, in some cases making computationally easy problems easier to solve and in other cases addressing mathematics' most challenging computationally hard problems. Another application area is optical image encryption, in which, typically, a phase mask modulates the fractional Fourier transformed coefficients of a perturbed input image, and the phase of the inverse transform is then sensed as the encrypted image. The inherent linearity that makes the system so elegant mitigates against its use as an effective encryption technique, but we show how a combination of optical and digital techniques can restore confidence in that security. We conclude with the concept of digital hologram image processing, and applications of same that are uniquely suited to optical implementation, where the processing, recognition, or encryption step operates on full field information, such as that emanating from a coherently illuminated real-world three-dimensional object.

  13. Smart time-pulse coding photoconverters as basic components 2D-array logic devices for advanced neural networks and optical computers

    NASA Astrophysics Data System (ADS)

    Krasilenko, Vladimir G.; Nikolsky, Alexander I.; Lazarev, Alexander A.; Michalnichenko, Nikolay N.

    2004-04-01

    The article deals with a conception of building arithmetic-logic devices (ALD) with a 2D-structure and optical 2D-array inputs-outputs as advanced high-productivity parallel basic operational training modules for realization of basic operation of continuous, neuro-fuzzy, multilevel, threshold and others logics and vector-matrix, vector-tensor procedures in neural networks, that consists in use of time-pulse coding (TPC) architecture and 2D-array smart optoelectronic pulse-width (or pulse-phase) modulators (PWM or PPM) for transformation of input pictures. The input grayscale image is transformed into a group of corresponding short optical pulses or time positions of optical two-level signal swing. We consider optoelectronic implementations of universal (quasi-universal) picture element of two-valued ALD, multi-valued ALD, analog-to-digital converters, multilevel threshold discriminators and we show that 2D-array time-pulse photoconverters are the base elements for these devices. We show simulation results of the time-pulse photoconverters as base components. Considered devices have technical parameters: input optical signals power is 200nW_200μW (if photodiode responsivity is 0.5A/W), conversion time is from tens of microseconds to a millisecond, supply voltage is 1.5_15V, consumption power is from tens of microwatts to a milliwatt, conversion nonlinearity is less than 1%. One cell consists of 2-3 photodiodes and about ten CMOS transistors. This simplicity of the cells allows to carry out their integration in arrays of 32x32, 64x64 elements and more.

  14. Colloids in Flatland: a perspective on 2D phase-separated systems, characterisation methods, and lineactant design.

    PubMed

    Bernardini, C; Stoyanov, S D; Arnaudov, L N; Cohen Stuart, M A

    2013-03-07

    In 1861 Thomas Graham gave birth to a new field of science, today known as colloid science. Nowadays, the notion "colloid" is often used referring to systems consisting of two immiscible phases, one of which is finely dispersed into the other. Research on colloids deals mostly with sols (solids dispersed in a liquid), emulsions (liquids dispersed in liquid), and foams (gas dispersed in a liquid). Because the dispersed particles are small, there is a lot of interface per unit mass. Not surprisingly, therefore, the properties of the interface have often a decisive effect on the behaviour of colloids. Water-air interfaces have a special relevance in this field: many water-insoluble molecules can be spread on water and, given the right spreading conditions and enough available surface area, their spreading proceeds until a monolayer (a one-molecule thick layer) eventually remains. Several 2D phases have been identified for such monolayers, like "gas", "liquid expanded", "liquid condensed", and "solid". The central question of this review is whether these 2D phases can also exist as colloidal systems, and what stabilizes the dispersed state in such systems. We shall present several systems capable of yielding 2D phase separation, from those based on either natural or fluorinated amphiphiles, to polymer-based ones. We shall seek for analogies in 3D and we shall try to clarify if the lines between these 2D objects play a similar role as the interfaces between 3D colloidal systems. In particular, we shall consider the special role of molecules that tend to accumulate at the phase boundaries, that is, at the contact lines, which will therefore be denoted "line-actants" (molecules that adsorb at a 1D interface, separating two 2D colloidal entities), by analogy to the term "surfactant" (which indicates a molecule that adsorbs at a 2D interface separating two 3D colloidal entities).

  15. Phase Conjugate Optics.

    DTIC Science & Technology

    1982-11-01

    multimode fibers. We have developed a detailed model of the photorefractive effect which will be used as a basis for comparing photorefractive materials...of our system. The preliminary results indicate that a resolution of 5 lines/mm was obtained ( compared with a resolution without the fiber of "u20...for comparing photorefractive materials for nonlinear phase conjugation. Preliminary results of four materials surveyed indicate that KNbO3 and BaTiO3

  16. 2D Optical Streaking for Ultra-Short Electron Beam Diagnostics

    SciTech Connect

    Ding, Y.T.; Huang, Z.; Wang, L.; /SLAC

    2011-12-14

    field ionization, which occurs in plasma case, gases species with high field ionization threshold should be considered. For a linear polarized laser, the kick to the ionized electrons depends on the phase of the laser when the electrons are born and the unknown timing jitter between the electron beam and laser beam makes the data analysis very difficult. Here we propose to use a circular polarized laser to do a 2-dimensional (2D) streaking (both x and y) and measure the bunch length from the angular distribution on the screen, where the phase jitter causes only a rotation of the image on the screen without changing of the relative angular distribution. Also we only need to know the laser wavelength for calibration. A similar circular RF deflecting mode was used to measure long bunches. We developed a numerical particle-in-Cell (PIC) code to study the dynamics of ionization electrons with the high energy beam and the laser beam.

  17. NIF optics phase gradient specfication

    SciTech Connect

    Williams, W.; Auerbach, J.; Hunt, J.; Lawson, L.; Manes, K.; Orth, C.; Sacks, R.; Trenholme, J.; Wegner, P.

    1997-05-02

    A root-mean-square (rms) phase gradient specification seems to allow a good connection between the NIP optics quality and focal spot requirements. Measurements on Beamlet optics individually, and as a chain, indicate they meet the assumptions necessary to use this specification, and that they have a typical rms phase gradient of {approximately}80 {angstrom}/cm. This may be sufficient for NIP to meet the proposed Stockpile Stewardship Management Program (SSMP) requirements of 80% of a high- power beam within a 200-250 micron diameter spot. Uncertainties include, especially, the scale length of the optics phase noise, the ability of the adaptive optic to correct against pump-induced distortions and optics noise, and the possibility of finding mitigation techniques against whole-beam self-focusing (e.g. a pre- correction optic). Further work is needed in these areas to better determine the NIF specifications. This memo is a written summary of a presentation on this topic given by W. Williams 24 April 1997 to NIP and LS&T personnel.

  18. Phase-Resolved Heterodyne-Detected Transient Grating Enhances the Capabilities of 2D IR Echo Spectroscopy.

    PubMed

    Jin, Geun Young; Kim, Yung Sam

    2017-02-09

    2D IR echo spectroscopy, with high sensitivity and femtosecond time resolution, enables us to understand structure and ultrafast dynamics of molecular systems. Application of this experimental technique on weakly absorbing samples, however, had been limited by the precise and unambiguous phase determination of the echo signals. In this study, we propose a new experimental scheme that significantly increases the phase stability of the involved IR pulses. We have demonstrated that the incorporation of phase-resolved heterodyne-detected transient grating (PR-HDTG) spectroscopy greatly enhances the capabilities of 2D IR spectroscopy. The new experimental scheme has been used to obtain 2D IR spectra on weakly absorbing azide ions (N3(-)) in H2O (absorbance ∼0.025), free of phase ambiguity even at large waiting times. We report the estimated spectral diffusion time scale (1.056 ps) of azide ions in aqueous solution from the 2D IR spectra and the vibrational lifetime (750 ± 3 fs) and the reorientation time (1108 ± 24 fs) from the PR-HDTG spectra.

  19. Hubbard Model study of Off Diagonally Confined fermions in a 2D Optical Lattice

    NASA Astrophysics Data System (ADS)

    Cone, Dave; Chiesa, Simone; Scalettar, Richard; Batrouni, George

    2010-03-01

    We report Quantum Monte Carlo simulations of a Hubbard Hamiltonian which incorporates a proposed new method for confining atoms in an optical lattice employing an inhomogeneous array of hopping matrix elements which trap atoms by going to zero at the lattice edges. This has been termed ``Off Diagonal Confinement (ODC)'' [1] to distinguish it from the more conventional use of a parabolic trap coupling to (diagonal) density operators. It has the advantage of producing systems which, while still being inhomogeneous, are entirely in the Mott phase, and allow simulations which are free of the sign problem at low temperatures. We analyze the effects of using ODC traps on the local density, density fluctuation, spin, and pairing correlation functions. Finally, we will discuss the advantages and importance of this new confinement technique for modeling correlated systems. Research supported by the Department of Energy, Office of Science SCIDAC program, DOE-DE-FC0206ER25793. [1] V.G. Rousseau et al., arXiv:0909.3543

  20. The 2005 Vazcun Valley Lahar: Evaluation of the TITAN2D Two-Phase Flow Model Using an Actual Event.

    NASA Astrophysics Data System (ADS)

    Williams, R.; Stinton, A. J.; Sheridan, M. F.

    2005-12-01

    TITAN2D is a depth-averaged, thin-layer computational fluid dynamics (CFD) code, suitable for simulating a variety of geophysical mass flows. TITAN2D output data include pile thickness and flow momentum at each time step for all cells traversed by the flow during the simulation. From this the flow limit, run-out path, pile velocity, deposit thickness, and travel time can be calculated. Results can be visualized in the open source GRASS GIS software or with the built-in TITAN2D viewer. A new two-phase TITAN2D version allows simulation of flows containing various mixtures of water and solids. The purpose of this study is to compare simulations by the two-phase flow version of TITAN2D with an actual event. The chosen natural flow is a small ash-rich lahar (volume approximately 60,000 m3) that occurred on 12 February 2005 in the Vazcún Valley, located on the north-east flank of Volcán Tungurahua, Ecuador. Lahars and pyroclastic flows along this valley could potentially threaten the 20,000 inhabitants living in and near the city of Baños. A variety of data sources exist for this lahar, including: pre- and post-event meter-scale topography, and photographic, video, seismic and acoustic flow monitoring (AFM) records from during the event. These data permit detailed comparisons between the dynamics of the actual lahar and those of the TITAN2D simulated flow. In particular, detailed comparisons are made between run-up heights, flow velocity, inundation area, and deposit area and thickness. Simulations utilize a variety of data derived from field observations such as lahar volume, solid to pore-fluid ratio and pre-event topography. TITAN2D is important in modeling lahars because it allows assessment of the impact of the flows on buildings and infrastructure lifelines located near drainages that descend from volcanoes.

  1. Optical method of measuring angular displacement using a 2-D charge coupled device.

    PubMed

    Sato, K; Yamamoto, S; Ami, M; Fukushima, K

    1990-08-10

    We investigated a quick noncontact method of measuring angular displacement with a simple system comprising a 2-D CCD and a personal computer. According to this method the angular displacement can be measured even when the rotational axis is not known, and even when the system moves parallel to the plane.

  2. c2d Spitzer IRS spectra of embedded low-mass young stars: gas-phase emission lines

    NASA Astrophysics Data System (ADS)

    Lahuis, F.; van Dishoeck, E. F.; Jørgensen, J. K.; Blake, G. A.; Evans, N. J.

    2010-09-01

    Context. A survey of mid-infrared gas-phase emission lines of H2, H2O and various atoms toward a sample of 43 embedded low-mass young stars in nearby star-forming regions is presented. The sources are selected from the Spitzer “Cores to Disks” (c2d) legacy program. Aims: The environment of embedded protostars is complex both in its physical structure (envelopes, outflows, jets, protostellar disks) and the physical processes (accretion, irradiation by UV and/or X-rays, excitation through slow and fast shocks) which take place. The mid-IR spectral range hosts a suite of diagnostic lines which can distinguish them. A key point is to spatially resolve the emission in the Spitzer-IRS spectra to separate extended PDR and shock emission from compact source emission associated with the circumstellar disk and jets. Methods: An optimal extraction method is used to separate both spatially unresolved (compact, up to a few hundred AU) and spatially resolved (extended, thousand AU or more) emission from the IRS spectra. The results are compared with the c2d disk sample and literature PDR and shock models to address the physical nature of the sources. Results: Both compact and extended emission features are observed. Warm (T_ex few hundred K) H2, observed through the pure rotational H2 S(0), S(1) and S(2) lines, and [S i] 25 μm emission is observed primarily in the extended component. [S i] is observed uniquely toward truly embedded sources and not toward disks. On the other hand hot (T_ex ⪆ 700 K) H2, observed primarily through the S(4) line, and [Ne ii] emission is seen mostly in the spatially unresolved component. [Fe ii] and [Si ii] lines are observed in both spatial components. Hot H2O emission is found in the spatially unresolved component of some sources. Conclusions: The observed emission on ≥1000 AU scales is characteristic of PDR emission and likely originates in the outflow cavities in the remnant envelope created by the stellar wind and jets from the embedded

  3. Auto- and hetero-associative memory using a 2-D optical logic gate

    NASA Technical Reports Server (NTRS)

    Chao, Tien-Hsin

    1989-01-01

    An optical associative memory system suitable for both auto- and hetero-associative recall is demonstrated. This system utilizes Hamming distance as the similarity measure between a binary input and a memory image with the aid of a two-dimensional optical EXCLUSIVE OR (XOR) gate and a parallel electronics comparator module. Based on the Hamming distance measurement, this optical associative memory performs a nearest neighbor search and the result is displayed in the output plane in real-time. This optical associative memory is fast and noniterative and produces no output spurious states as compared with that of the Hopfield neural network model.

  4. Dynamic photorefractive self-amplified angular-multiplex 2-D optical beam-array generation

    NASA Astrophysics Data System (ADS)

    Zhou, Shaomin; Yeh, Pochi; Liu, Hua-Kuang

    1993-01-01

    A real-time 2-D angular-multiplex beam-array holographic storage and reconstruction technique using electrically-addressed spatial light modulators(E-SLM's) and photorefractive crystals is described. Using a liquid crystal television (LCTV) spatial light modulator (SLM) for beam steering and lithium niobate photorefractive crystal for holographic recording, experimental results of generating large and complicated arrays of laser beams with high diffraction efficiency and good uniformity are presented.

  5. 2-1/2-D electromagnetic modeling of nodular defects in high-power multilayer optical coatings

    SciTech Connect

    Molau, N.E.; Brand, H.R.; Kozlowski, M.R.; Shang, C.C.

    1996-07-01

    Advances in the design and production of high damage threshold optical coatings for use in mirrors and polarizers have been driven by the design requirements of high-power laser systems such as the proposed 1.8-MJ National Ignition Facility (NIF) and the prototype 12- kJ Beamlet laser system. The present design of the NIF will include 192 polarizers and more than 1100 mirrors. Currently, the material system of choice for high-power multilayer optical coatings with high damage threshold applications near 1.06 {mu}m are e-beam deposited HfO{sub 2}/Si0{sub 2} coatings. However, the optical performance and laser damage thresholds of these coatings are limited by micron-scale defects and insufficient control over layer thickness. In this report, we will discuss the results of our 2-1/2-D finite-element time- domain (FDTD) EM modeling effort for rotationally-symmetric nodular defects in multilayer dielectric HR coatings. We have added a new diagnostic to the 2-1/2-D FDTD EM code, AMOS, that enables us to calculate the peak steady-state electric fields throughout a 2-D planar region containing a 2-D r-z cross-section of the axisymmetric nodular defect and surrounding multilayer dielectric stack. We have also generated a series of design curves to identify the range of loss tangents for Si0{sub 2} and HfO{sub 2} consistent with the experimentally determined power loss of the HR coatings. In addition, we have developed several methods to provide coupling between the EM results and the thermal-mechanical simulation effort.

  6. 2D Larkin-Imry-Ma state of deformed ABM phase of superfluid 3He in ``ordered'' aerogel

    NASA Astrophysics Data System (ADS)

    Dmitriev, Vladimir; Senin, Andrey; Yudin, Alexey

    2014-03-01

    We report NMR studies of high temperature superfluid phase of 3He in so called ``ordered'' aerogel1 which strands are almost parallel to each other. Previously, it was found that the NMR properties of this phase depend on whether it is obtained on cooling from the normal phase or on warming from the low temperature phase2. These two types of high temperature phase (called as ESP1 and ESP2) correspond to Anderson-Brinkman-Morel (ABM) phase with large polar distortion and with orbital vector being in 2D Larkin-Imry-Ma (LIM) state. Here we present results which show that the observed difference in NMR signatures of the ESP1 and the ESP2 states is due to that the corresponding 2D LIM states can be anisotropic. In the ESP1 phase the anisotropy is absent or small, while in the ESP2 phase the anisotropy is large. NMR data have allowed us to estimate values of these anisotropies.

  7. Optical properties of GaAs 2D hexagonal and cubic photonic crystal

    SciTech Connect

    Arab, F. Assali, A.; Grain, R.; Kanouni, F.

    2015-03-30

    In this paper we present our theoretical study of 2D hexagonal and cubic rods GaAs in air, with plan wave expansion (PWE) and finite difference time domain (FDTD) by using BandSOLVE and FullWAVE of Rsoft photonic CAD package. In order to investigate the effect of symmetry and radius, we performed calculations of the band structures for both TM and TE polarization, contour and electromagnetic propagation and transmission spectra. Our calculations show that the hexagonal structure gives a largest band gaps compare to cubic one for a same filling factor.

  8. Design and implementation of a 2-D endoscopic optical fiber scanner

    NASA Astrophysics Data System (ADS)

    Liu, Zhihai; Fu, Ling; Gao, Fei; Zhang, Xiongbo

    2008-12-01

    We have designed a small type of endoscopic 2D fiber scanner probe to incorporate OCT with endoscopy imaging. The new probe consists with two piezoelectric ceramics plated with electrode, a conductive thin-film with non-inverse piezoelectric effect and a piece of nude fiber with coating layers removed. To accomplish the scanning, the only thing need to be done is to drive the two piezoelectric ceramic sheets which provides simpler structure and at the same time minimizes the probe effectively. Here we have obtained some preliminary results and verified the feasibility of the program.

  9. Terahertz all-optical NOR and AND logic gates based on 2D photonic crystals

    NASA Astrophysics Data System (ADS)

    Parandin, Fariborz; Karkhanehchi, Mohammad Mehdi

    2017-01-01

    Usually, photonic crystals are used in designing optical logic gates. This study focuses on the design and simulation of an all optical NOR and AND logic gates based on two dimensional photonic crystals. The simplicity of the proposed structure is a characteristic feature of this designation. Finite Difference Time Domain (FDTD) as well as Plane Wave Expansion (PWE) methods have been used for this structural analysis. The simulation results revealed an increase in the interval between "zero" and "one" logic levels. Also, the simple structure and its small size demonstrate the usefulness of this structure in optical integrated circuits. The proposed optical gates can operate with a bit rate of about 1.54 Tbit/s.

  10. 2D optical manipulation and assembly of shape-complementary planar microstructures.

    PubMed

    Rodrigo, Peter John; Kelemen, Lóránd; Alonzo, Carlo Amadeo; Perch-Nielsen, Ivan R; Dam, Jeppe Seidelin; Ormos, Pál; Glückstad, Jesper

    2007-07-09

    Optical trapping and manipulation offer great flexibility as a non-contact microassembly tool. Its application to the assembly of microscale building blocks may open new doors for micromachine technology. In this work, we demonstrate all-optical assembly of microscopic puzzle pieces in a fluidic environment using programmable arrays of trapping beams. Identical shape-complimentary pieces are optically fabricated with submicron resolution using two-photon polymerization (2PP) technique. These are efficiently assembled into space-filling tessellations by a multiple-beam optical micromanipulation system. The flexibility of the system allows us to demonstrate both user-interactive and computer-automated modes of serial and parallel assembly of microscale objects with high spatial and angular positioning precision.

  11. Characterization of the bistable wideband optical filter on the basis of nonlinear 2D photonic crystal

    SciTech Connect

    Guryev, I. V. Sukhoivanov, I. A. Andrade Lucio, J. A. Manzano, O. Ibarra Rodriguez, E. Vargaz Gonzales, D. Claudio Chavez, R. I. Mata Gurieva, N. S.

    2014-05-15

    In our work, we investigated the wideband optical filter on the basis of nonlinear photonic crystal. The all-optical flip-flop using ultra-short pulses with duration lower than 200 fs is obtained in such filters. Here we pay special attention to the stability problem of the nonlinear element. To investigate this problem, the temporal response demonstrating the flip-flop have been computed within the certain range of the wavelengths as well as at different input power.

  12. Optical nanostructures in 2D for wide-diameter and broadband beam collimation.

    PubMed

    Clark, James; Anguita, José V; Chen, Ying; Silva, S Ravi P

    2016-01-06

    Eliminating curved refracting lensing components used in conventional projection, imaging and sensing optical assemblies, is critical to enable compactness and miniaturisation of optical devices. A suitable means is replacing refracting lenses with two-dimensional optical media in flat-slab form, to achieve an equivalent optical result. One approach, which has been the focus of intense research, uses a Veselago lens which features a negative-index metamaterial. However, practical implementations rely on resonance techniques, thus broadband operation at optical frequencies imposes significant technical challenges that have been difficult to overcome. Here, we demonstrate a highly-collimated, broadband, wide-diameter beam from a compact source in flat-slab form, based on light collimation using nanomaterials ordered in patterns and embedded into flexible polymers. These provide a highly anisotropic absorption coefficient due to patterns created by vertical carbon nanotube structures grown on glass, and the anisotropic electrical conductivity of the nanotubes. We show this nanostructure strongly absorbs unwanted off-axis light rays, whilst transmitting the desired on-axis rays, to achieve the required optical effect over broadband, from visible to short-infrared, thus circumventing some technical limitations of negative-index metamaterials. We further show a low substrate-temperature system for nanotube growth, allowing direct implementation into heat-sensitive large-area devices.

  13. Optical nanostructures in 2D for wide-diameter and broadband beam collimation

    NASA Astrophysics Data System (ADS)

    Clark, James; Anguita, José V.; Chen, Ying; Silva, S. Ravi P.

    2016-01-01

    Eliminating curved refracting lensing components used in conventional projection, imaging and sensing optical assemblies, is critical to enable compactness and miniaturisation of optical devices. A suitable means is replacing refracting lenses with two-dimensional optical media in flat-slab form, to achieve an equivalent optical result. One approach, which has been the focus of intense research, uses a Veselago lens which features a negative-index metamaterial. However, practical implementations rely on resonance techniques, thus broadband operation at optical frequencies imposes significant technical challenges that have been difficult to overcome. Here, we demonstrate a highly-collimated, broadband, wide-diameter beam from a compact source in flat-slab form, based on light collimation using nanomaterials ordered in patterns and embedded into flexible polymers. These provide a highly anisotropic absorption coefficient due to patterns created by vertical carbon nanotube structures grown on glass, and the anisotropic electrical conductivity of the nanotubes. We show this nanostructure strongly absorbs unwanted off-axis light rays, whilst transmitting the desired on-axis rays, to achieve the required optical effect over broadband, from visible to short-infrared, thus circumventing some technical limitations of negative-index metamaterials. We further show a low substrate-temperature system for nanotube growth, allowing direct implementation into heat-sensitive large-area devices.

  14. Optical nanostructures in 2D for wide-diameter and broadband beam collimation

    PubMed Central

    Clark, James; Anguita, José V.; Chen, Ying; Silva, S. Ravi P.

    2016-01-01

    Eliminating curved refracting lensing components used in conventional projection, imaging and sensing optical assemblies, is critical to enable compactness and miniaturisation of optical devices. A suitable means is replacing refracting lenses with two-dimensional optical media in flat-slab form, to achieve an equivalent optical result. One approach, which has been the focus of intense research, uses a Veselago lens which features a negative-index metamaterial. However, practical implementations rely on resonance techniques, thus broadband operation at optical frequencies imposes significant technical challenges that have been difficult to overcome. Here, we demonstrate a highly-collimated, broadband, wide-diameter beam from a compact source in flat-slab form, based on light collimation using nanomaterials ordered in patterns and embedded into flexible polymers. These provide a highly anisotropic absorption coefficient due to patterns created by vertical carbon nanotube structures grown on glass, and the anisotropic electrical conductivity of the nanotubes. We show this nanostructure strongly absorbs unwanted off-axis light rays, whilst transmitting the desired on-axis rays, to achieve the required optical effect over broadband, from visible to short-infrared, thus circumventing some technical limitations of negative-index metamaterials. We further show a low substrate-temperature system for nanotube growth, allowing direct implementation into heat-sensitive large-area devices. PMID:26732851

  15. Analysis of 2D Phase Contrast MRI in Renal Arteries by Self Organizing Maps

    NASA Astrophysics Data System (ADS)

    Zöllner, Frank G.; Schad, Lothar R.

    We present an approach based on self organizing maps to segment renal arteries from 2D PC Cine MR, images to measure blood velocity and flow. Such information are important in grading renal artery stenosis and support the decision on surgical interventions like percu-tan transluminal angioplasty. Results show that the renal arteries could be extracted automatically. The corresponding velocity profiles show high correlation (r=0.99) compared those from manual delineated vessels. Furthermore, the method could detect possible blood flow patterns within the vessel.

  16. 2D harmonic filtering of MR phase images in multicenter clinical setting: toward a magnetic signature of cerebral microbleeds.

    PubMed

    Kaaouana, Takoua; de Rochefort, Ludovic; Samaille, Thomas; Thiery, Nathalie; Dufouil, Carole; Delmaire, Christine; Dormont, Didier; Chupin, Marie

    2015-01-01

    Cerebral microbleeds (CMBs) have emerged as a new imaging marker of small vessel disease. Composed of hemosiderin, CMBs are paramagnetic and can be detected with MRI sequences sensitive to magnetic susceptibility (typically, gradient recalled echo T2* weighted images). Nevertheless, their identification remains challenging on T2* magnitude images because of confounding structures and lesions. In this context, T2* phase image may play a key role in better characterizing CMBs because of its direct relationship with local magnetic field variations due to magnetic susceptibility difference. To address this issue, susceptibility-based imaging techniques were proposed, such as Susceptibility Weighted Imaging (SWI) and Quantitative Susceptibility Mapping (QSM). But these techniques have not yet been validated for 2D clinical data in multicenter settings. Here, we introduce 2DHF, a fast 2D phase processing technique embedding both unwrapping and harmonic filtering designed for data acquired in 2D, even with slice-to-slice inconsistencies. This method results in internal field maps which reveal local field details due to magnetic inhomogeneity within the region of interest only. This technique is based on the physical properties of the induced magnetic field and should yield consistent results. A synthetic phantom was created for numerical simulations. It simulates paramagnetic and diamagnetic lesions within a 'brain-like' tissue, within a background. The method was evaluated on both this synthetic phantom and multicenter 2D datasets acquired in standardized clinical setting, and compared with two state-of-the-art methods. It proved to yield consistent results on synthetic images and to be applicable and robust on patient data. As a proof-of-concept, we finally illustrate that it is possible to find a magnetic signature of CMBs and CMCs on internal field maps generated with 2DHF on 2D clinical datasets that give consistent results with CT-scans in a subsample of 10 subjects

  17. Optoelectronic Infrastructure for Radio Frequency and Optical Phased Arrays

    NASA Technical Reports Server (NTRS)

    Cai, Jianhong

    2015-01-01

    Optoelectronic integrated circuits offer radiation-hardened solutions for satellite systems in addition to improved size, weight, power, and bandwidth characteristics. ODIS, Inc., has developed optoelectronic integrated circuit technology for sensing and data transfer in phased arrays. The technology applies integrated components (lasers, amplifiers, modulators, detectors, and optical waveguide switches) to a radio frequency (RF) array with true time delay for beamsteering. Optical beamsteering is achieved by controlling the current in a two-dimensional (2D) array. In this project, ODIS integrated key components to produce common RF-optical aperture operation.

  18. All-optical XNOR gate based on 2D photonic-crystal ring resonators

    NASA Astrophysics Data System (ADS)

    Moniem, Tamer A.

    2017-02-01

    A novel all-optical XNOR gate is proposed, which combines the nonlinear Kerr effect with photonic-crystal ring resonators (PCRRs). The total size of the proposed optical XNOR gate based on photonic crystals with a square lattice of silicon rods is equal to 35 × 21 μm. The proposed structure has a bandgap in the range from 0.32 to 0.44. To confirm the operation and feasibility of the overall system use is made of analytical and numerical simulation using the dimensional finite difference time domain (FDTD) and plane wave expansion (PWE) methods.

  19. The optical system design and application of micro 2D barcode

    NASA Astrophysics Data System (ADS)

    Zhu, Yi-jia; Li, Liang-liang; Qian, Cheng; Liang, Zhong-cheng

    2010-11-01

    We show an optical system of micro visual tag which is based on the principle of microscope and the property of QR Code. Unlike current optical tag, such as barcodes, must be read within a short rang and occupy valuable physical space on products, the new tags can be shrunk to several millimeters and captured from a distance of over 0.5 meters. We design the transmitter according to the parameters of camera lens. We also take the detection range and apertures into account, meanwhile conduct simulations and experiments. The result shows that: the tag can be captured from a long distance, and the amplified image is able to accurately be decoded.

  20. Optical signatures of a hypercritical 1D potential in a 2D Dirac metal

    NASA Astrophysics Data System (ADS)

    Jiang, Bor-Yuan; Ni, Guangxin; Pan, Cheng; Fei, Zhe; Cheng, Bin; Lau, Chun Ning; Bockrath, Marc; Basov, Dimitri; Fogler, Michael

    Generation of quasi-bound states in graphene near strong charged perturbations is a solid-state analog of atomic collapse of superheavy elements or particle production by hypothetical cosmic strings. We show, for the case of a linelike perturbation, that as the perturbation grows in strength, quasi-bound states are generated sequentially. Each of these critical events is signaled by a sharp change in the local optical conductivity. Tunable linelike perturbations can be realized in experiment using nanowire or nanotube electrostatic gates. We report measurements of local conductivity for such systems obtained through near-field optical microscopy.

  1. Optical signal to noise ratio monitoring using variable phase difference phase portrait with software synchronization.

    PubMed

    Yu, Yi; Yu, Changyuan

    2015-05-04

    In this paper, a novel optical signal to noise ratio (OSNR) monitoring method using 2-dimension (2-D) phase portrait is proposed and demonstrated, which is generated by using a single low-speed sampling channel with software synchronization technique. Moreover, variable phase difference is proposed to generate the X-Y pairs, which increases the tolerance of synchronization accuracy significantly. This method is a cost effective solution with simple system setup.

  2. Optical position feedback of quasi-static 2D MOEMS mirrors

    NASA Astrophysics Data System (ADS)

    Tortschanoff, A.; Baumgart, M.; Holzmann, D.; Lenzhofer, M.; Sandner, T.; Kenda, A.

    2013-05-01

    Recently, we have realized a new position sensing device for MOEMS mirrors applicable to arbitrary trajectories, which is based on the measurement of a reflected light beam with a quadrant diode. In this work we present the characteristics of this device, showing first experimental results obtained with a test set-up, but also theoretical considerations and optical ray-tracing simulations.

  3. Solid-solid phase transformations induced through cation exchange and strain in 2D heterostructured copper sulfide nanocrystals.

    PubMed

    Ha, Don-Hyung; Caldwell, Andrew H; Ward, Matthew J; Honrao, Shreyas; Mathew, Kiran; Hovden, Robert; Koker, Margaret K A; Muller, David A; Hennig, Richard G; Robinson, Richard D

    2014-12-10

    We demonstrate dual interface formation in nanocrystals (NCs) through cation exchange, creating epitaxial heterostructures within spherical NCs. The thickness of the inner-disk layer can be tuned to form two-dimensional (2D), single atomic layers (<1 nm). During the cation exchange reaction from copper sulfide to zinc sulfide (ZnS), we observe a solid-solid phase transformation of the copper sulfide phase in heterostructured NCs. As the cation exchange reaction is initiated, Cu ions replaced by Zn ions at the interfaces are accommodated in intrinsic Cu vacancy sites present in the initial roxbyite (Cu1.81S) phase of copper sulfide, inducing a full phase transition to djurleite (Cu1.94S)/low chalcocite (Cu2S), a more thermodynamically stable phase than roxbyite. As the reaction proceeds and reduces the size of the copper sulfide layer, the epitaxial strain at the interfaces between copper sulfide and ZnS increases and is maximized for a copper sulfide disk ∼ 5 nm thick. To minimize this strain energy, a second phase transformation occurs back to the roxbyite phase, which shares a similar sulfur sublattice to wurtzite ZnS. The observation of a solid-solid phase transformation in our unique heterostructured NCs provides a new pathway to control desired phases and an insight into the influence of cation exchange on nanoscale phase transitions in heterostructured materials.

  4. Room-temperature subnanosecond waveguide lasers in Nd:YVO4 Q-switched by phase-change VO2: A comparison with 2D materials

    PubMed Central

    Nie, Weijie; Li, Rang; Cheng, Chen; Chen, Yanxue; Lu, Qingming; Romero, Carolina; Vázquez de Aldana, Javier R.; Hao, Xiaotao; Chen, Feng

    2017-01-01

    We report on room-temperature subnanosecond waveguide laser operation at 1064 nm in a Nd:YVO4 crystal waveguide through Q-switching of phase-change nanomaterial vanadium dioxide (VO2). The unique feature of VO2 nanomaterial from the insulating to metallic phases offers low-saturation-intensity nonlinear absorptions of light for subnanosecond pulse generation. The low-loss waveguide is fabricated by using the femtosecond laser writing with depressed cladding geometry. Under optical pump at 808 nm, efficient pulsed laser has been achieved in the Nd:YVO4 waveguide, reaching minimum pulse duration of 690 ps and maximum output average power of 66.7 mW. To compare the Q-switched laser performances by VO2 saturable absorber with those based on two-dimensional materials, the 1064-nm laser pulses have been realized in the same waveguide platform with either graphene or transition metal dichalcogenide (in this work, WS2) coated mirror. The results on 2D material Q-switched waveguide lasers have shown that the shortest pulses are with 22-ns duration, whilst the maximum output average powers reach ~161.9 mW. This work shows the obvious difference on the lasing properties based on phase-change material and 2D materials, and suggests potential applications of VO2 as low-cost saturable absorber for subnanosecond laser generation. PMID:28383017

  5. Fiber optic phase stepping system for interferometry

    NASA Technical Reports Server (NTRS)

    Mercer, Carolyn R.; Beheim, Glenn

    1991-01-01

    A closed loop phase control system using an all-fiber optical configuration has been developed for use in phase-stepping interferometry. This system drives the relative phase of two interfering beams through a sequence of pi/2 rad increments so that the initial relative phase of these beams can be determined. This phase-stepping system uses optical fibers to provide spatially uniform phase steps from a flexible, easily aligned optical configuration. In addition, this system uses phase feedback to eliminate phase modulator errors and to compensate for phase drifts caused by environmental disturbances.

  6. The CU 2-D-MAX-DOAS instrument - Part 2: Raman scattering probability measurements and retrieval of aerosol optical properties

    NASA Astrophysics Data System (ADS)

    Ortega, Ivan; Coburn, Sean; Berg, Larry K.; Lantz, Kathy; Michalsky, Joseph; Ferrare, Richard A.; Hair, Johnathan W.; Hostetler, Chris A.; Volkamer, Rainer

    2016-08-01

    The multiannual global mean of aerosol optical depth at 550 nm (AOD550) over land is ˜ 0.19, and that over oceans is ˜ 0.13. About 45 % of the Earth surface shows AOD550 smaller than 0.1. There is a need for measurement techniques that are optimized to measure aerosol optical properties under low AOD conditions. We present an inherently calibrated retrieval (i.e., no need for radiance calibration) to simultaneously measure AOD and the aerosol phase function parameter, g, based on measurements of azimuth distributions of the Raman scattering probability (RSP), the near-absolute rotational Raman scattering (RRS) intensity. We employ radiative transfer model simulations to show that for solar azimuth RSP measurements at solar elevation and solar zenith angle (SZA) smaller than 80°, RSP is insensitive to the vertical distribution of aerosols and maximally sensitive to changes in AOD and g under near-molecular scattering conditions. The University of Colorado two-dimensional Multi-AXis Differential Optical Absorption Spectroscopy (CU 2-D-MAX-DOAS) instrument was deployed as part of the Two Column Aerosol Project (TCAP) at Cape Cod, MA, during the summer of 2012 to measure direct sun spectra and RSP from scattered light spectra at solar relative azimuth angles (SRAAs) between 5 and 170°. During two case study days with (1) high aerosol load (17 July, 0.3 < AOD430 < 0.6) and (2) near-molecular scattering conditions (22 July, AOD430 < 0.13) we compare RSP-based retrievals of AOD430 and g with data from a co-located CIMEL sun photometer, Multi-Filter Rotating Shadowband Radiometer (MFRSR), and an airborne High Spectral Resolution Lidar (HSRL-2). The average difference (relative to DOAS) for AOD430 is +0.012 ± 0.023 (CIMEL), -0.012 ± 0.024 (MFRSR), -0.011 ± 0.014 (HSRL-2), and +0.023 ± 0.013 (CIMELAOD - MFRSRAOD) and yields the following expressions for correlations between different instruments

  7. Auto and hetero-associative memory using a 2-D optical logic gate

    NASA Technical Reports Server (NTRS)

    Chao, Tien-Hsin (Inventor)

    1992-01-01

    An optical system for auto-associative and hetero-associative recall utilizing Hamming distance as the similarity measure between a binary input image vector V(sup k) and a binary image vector V(sup m) in a first memory array using an optical Exclusive-OR gate for multiplication of each of a plurality of different binary image vectors in memory by the input image vector. After integrating the light of each product V(sup k) x V(sup m), a shortest Hamming distance detection electronics module determines which product has the lowest light intensity and emits a signal that activates a light emitting diode to illuminate a corresponding image vector in a second memory array for display. That corresponding image vector is identical to the memory image vector V(sup m) in the first memory array for auto-associative recall or related to it, such as by name, for hetero-associative recall.

  8. Leveraging Nanocavity Harmonics for Control of Optical Processes in 2D Semiconductors.

    PubMed

    Akselrod, Gleb M; Ming, Tian; Argyropoulos, Christos; Hoang, Thang B; Lin, Yuxuan; Ling, Xi; Smith, David R; Kong, Jing; Mikkelsen, Maiken H

    2015-05-13

    Optical cavities with multiple tunable resonances have the potential to provide unique electromagnetic environments at two or more distinct wavelengths--critical for control of optical processes such as nonlinear generation, entangled photon generation, or photoluminescence (PL) enhancement. Here, we show a plasmonic nanocavity based on a nanopatch antenna design that has two tunable resonant modes in the visible spectrum separated by 350 nm and with line widths of ∼60 nm. The importance of utilizing two resonances simultaneously is demonstrated by integrating monolayer MoS2, a two-dimensional semiconductor, into the colloidally synthesized nanocavities. We observe a 2000-fold enhancement in the PL intensity of MoS2--which has intrinsically low absorption and small quantum yield--at room temperature, enabled by the combination of tailored absorption enhancement at the first harmonic and PL quantum-yield enhancement at the fundamental resonance.

  9. Optical properties of two-dimensional (2D) CdSe nanostructures

    NASA Astrophysics Data System (ADS)

    Cherevkov, S. A.; Baranov, A. V.; Fedorov, A. V.; Litvin, A. P.; Artemyev, M. V.; Prudnikau, A. V.

    2013-09-01

    The resonant and off-resonant Raman spectra of optical phonons in two-dimensional CdSe nanocrystals of 5, 6, and 7 monolayers are analysed. The spectra are dominated by SO and LO phonon bands of CdSe, whose frequencies are thickness-independent in the off-resonant Raman scattering but demonstrate an evident thickness dependence in the case of the resonant Raman scattering.

  10. Integrated packaging of 2D MOEMS mirrors with optical position feedback

    NASA Astrophysics Data System (ADS)

    Baumgart, M.; Lenzhofer, M.; Kremer, M. P.; Tortschanoff, A.

    2015-02-01

    Many applications of MOEMS microscanners rely on accurate position feedback. For MOEMS devices which do not have intrinsic on-chip feedback, position information can be provided with optical methods, most simply by using a reflection from the backside of a MOEMS scanner. By measuring the intensity distribution of the reflected beam across a quadrant diode, one can precisely detect the mirror's deflection angles. Previously, we have presented a position sensing device, applicable to arbitrary trajectories, which is based on the measurement of the position of the reflected laser beam with a quadrant diode. In this work, we present a novel setup, which comprises the optical position feedback functionality integrated into the device package itself. The new device's System-in-Package (SiP) design is based on a flip-folded 2.5D PCB layout and fully assembled as small as 9.2×7×4 mm³ in total. The device consists of four layers, which supply the MOEMS mirror, a spacer to provide the required optical path length, the quadrant photo-diode and a laser diode to serve as the light source. In addition to describing the mechanical setup of the novel device, we will present first experimental results and optical simulation studies. Accurate position feedback is the basis for closed-loop control of the MOEMS devices, which is crucial for some applications as image projection for example. Position feedback and the possibility of closed-loop control will significantly improve the performance of these devices.

  11. Optical Observation of Plasmonic Nonlocal Effects in a 2D Superlattice of Ultrasmall Gold Nanoparticles.

    PubMed

    Shen, Hao; Chen, Li; Ferrari, Lorenzo; Lin, Meng-Hsien; Mortensen, N Asger; Gwo, Shangjr; Liu, Zhaowei

    2017-04-12

    The advances in recent nanofabrication techniques have facilitated explorations of metal structures into nanometer scales, where the traditional local-response Drude model with hard-wall boundary conditions fails to accurately describe their optical responses. The emerging nonlocal effects in single ultrasmall silver nanoparticles have been experimentally observed in single-particle spectroscopy enabled by the unprecedented high spatial resolution of electron energy loss spectroscopy (EELS). However, the unambiguous optical observation of such new effects in gold nanoparticles has yet not been reported, due to the extremely weak scattering and the obscuring fingerprint of strong interband transitions. Here we present a nanosystem, a superlattice monolayer formed by sub-10 nm gold nanoparticles. Plasmon resonances are spectrally well-separated from interband transitions, while exhibiting clearly distinguishable blueshifts compared to predictions by the classical local-response model. Our far-field spectroscopy was performed by a standard optical transmission and reflection setup, and the results agreed excellently with the hydrodynamic nonlocal model, opening a simple and widely accessible way for addressing quantum effects in nanoplasmonic systems.

  12. Enhanced Doppler reflectometry power response: physical optics and 2D full wave modelling

    NASA Astrophysics Data System (ADS)

    Pinzón, J. R.; Happel, T.; Blanco, E.; Conway, G. D.; Estrada, T.; Stroth, U.

    2017-03-01

    The power response of a Doppler reflectometer is investigated by means of the physical optics model; a simple model which considers basic scattering processes at the reflection layer. Apart from linear and saturated scattering regimes, non-linear regimes with an enhanced backscattered power are found. The different regimes are characterized and understood based on analytical calculations. The power response is also studied with two-dimensional full wave simulations, where the enhanced backscattered power regimes are also found in qualitative agreement with the physical optics results. The ordinary and extraordinary modes are compared for the same angle of incidence, with the conclusion that the ordinary mode is better suited for Doppler reflectometry turbulence level measurements due to the linearity of its response. The scattering efficiency is studied and a first approximation to describe it is proposed. At the end, the application of the physical optics results to experimental data analysis is discussed. In particular, a formula to assess the linearity of Doppler reflectometry measurements is provided.

  13. Algorithm of Shaping Multiple-beam Braggs Acousto-optic Diffraction Laser Field Into 1D and 2D Patterns

    NASA Astrophysics Data System (ADS)

    Zakharchenko, S.; Baturin, A.

    2015-09-01

    Algorithm of solving a direct problem of acousto-optic interaction between laser emission and acoustic signal consisting of a set of equidistant frequency components is proposed. An infinite system of coupled wave differential equations is reduced to eigenvalue problem. The contribution of the higher rediffraction orders is analyzed separately. Inverse problem of finding an optimal set of equidistant frequency components of a driving acoustic signal to form the objective diffraction pattern is also considered and a few optimization approaches are analyzed. A naïve heuristic method of splitting 2D pattern into subframes, each suitable for simultaneous projection by two acousto-optical deflectors driven by multifrequency composite signal, is developed.

  14. A Pedestrian Detection Scheme Using a Coherent Phase Difference Method Based on 2D Range-Doppler FMCW Radar.

    PubMed

    Hyun, Eugin; Jin, Young-Seok; Lee, Jong-Hun

    2016-01-20

    For an automotive pedestrian detection radar system, fast-ramp based 2D range-Doppler Frequency Modulated Continuous Wave (FMCW) radar is effective for distinguishing between moving targets and unwanted clutter. However, when a weak moving target such as a pedestrian exists together with strong clutter, the pedestrian may be masked by the side-lobe of the clutter even though they are notably separated in the Doppler dimension. To prevent this problem, one popular solution is the use of a windowing scheme with a weighting function. However, this method leads to a spread spectrum, so the pedestrian with weak signal power and slow Doppler may also be masked by the main-lobe of clutter. With a fast-ramp based FMCW radar, if the target is moving, the complex spectrum of the range- Fast Fourier Transform (FFT) is changed with a constant phase difference over ramps. In contrast, the clutter exhibits constant phase irrespective of the ramps. Based on this fact, in this paper we propose a pedestrian detection for highly cluttered environments using a coherent phase difference method. By detecting the coherent phase difference from the complex spectrum of the range-FFT, we first extract the range profile of the moving pedestrians. Then, through the Doppler FFT, we obtain the 2D range-Doppler map for only the pedestrian. To test the proposed detection scheme, we have developed a real-time data logging system with a 24 GHz FMCW transceiver. In laboratory tests, we verified that the signal processing results from the proposed method were much better than those expected from the conventional 2D FFT-based detection method.

  15. A Pedestrian Detection Scheme Using a Coherent Phase Difference Method Based on 2D Range-Doppler FMCW Radar

    PubMed Central

    Hyun, Eugin; Jin, Young-Seok; Lee, Jong-Hun

    2016-01-01

    For an automotive pedestrian detection radar system, fast-ramp based 2D range-Doppler Frequency Modulated Continuous Wave (FMCW) radar is effective for distinguishing between moving targets and unwanted clutter. However, when a weak moving target such as a pedestrian exists together with strong clutter, the pedestrian may be masked by the side-lobe of the clutter even though they are notably separated in the Doppler dimension. To prevent this problem, one popular solution is the use of a windowing scheme with a weighting function. However, this method leads to a spread spectrum, so the pedestrian with weak signal power and slow Doppler may also be masked by the main-lobe of clutter. With a fast-ramp based FMCW radar, if the target is moving, the complex spectrum of the range- Fast Fourier Transform (FFT) is changed with a constant phase difference over ramps. In contrast, the clutter exhibits constant phase irrespective of the ramps. Based on this fact, in this paper we propose a pedestrian detection for highly cluttered environments using a coherent phase difference method. By detecting the coherent phase difference from the complex spectrum of the range-FFT, we first extract the range profile of the moving pedestrians. Then, through the Doppler FFT, we obtain the 2D range-Doppler map for only the pedestrian. To test the proposed detection scheme, we have developed a real-time data logging system with a 24 GHz FMCW transceiver. In laboratory tests, we verified that the signal processing results from the proposed method were much better than those expected from the conventional 2D FFT-based detection method. PMID:26805835

  16. Ultra-low power threshold for laser induced changes in optical properties of 2D molybdenum dichalcogenides

    NASA Astrophysics Data System (ADS)

    Cadiz, Fabian; Robert, Cedric; Wang, Gang; Kong, Wilson; Fan, Xi; Blei, Mark; Lagarde, Delphine; Gay, Maxime; Manca, Marco; Taniguchi, Takashi; Watanabe, Kenji; Amand, Thierry; Marie, Xavier; Renucci, Pierre; Tongay, Sefaattin; Urbaszek, Bernhard

    2016-12-01

    The optical response of traditional semiconductors depends on the laser excitation power used in experiments. For two-dimensional (2D) semiconductors, laser excitation effects are anticipated to be vastly different due to complexity added by their ultimate thinness, high surface to volume ratio, and laser-membrane interaction effects. We show in this article that under laser excitation the optical properties of 2D materials undergo irreversible changes in vacuum. Most surprisingly these effects take place even at low steady state excitation, which is commonly thought to be non-intrusive. In low temperature photoluminescence (PL) we show for monolayer (ML) MoSe2 samples grown by different techniques that laser treatment increases significantly the trion (i.e. charged exciton) contribution to the emission compared to the neutral exciton emission. Comparison between samples exfoliated onto different substrates shows that laser induced doping is more efficient for ML MoSe2 on SiO2/Si compared to h-BN and gold. For ML MoS2 we show that exposure to laser radiation with an average power in the μW μm- 2 range does not just increase the trion-to-exciton PL emission ratio, but may result in the irreversible disappearance of the neutral exciton PL emission and a shift of the main PL peak to lower energy.

  17. Optical phased-array ladar.

    PubMed

    Montoya, Juan; Sanchez-Rubio, Antonio; Hatch, Robert; Payson, Harold

    2014-11-01

    We demonstrate a ladar with 0.5 m class range resolution obtained by integrating a continuous-wave optical phased-array transmitter with a Geiger-mode avalanche photodiode receiver array. In contrast with conventional ladar systems, an array of continuous-wave sources is used to effectively pulse illuminate a target by electro-optically steering far-field fringes. From the reference frame of a point in the far field, a steered fringe appears as a pulse. Range information is thus obtained by measuring the arrival time of a pulse return from a target to a receiver pixel. This ladar system offers a number of benefits, including broad spectral coverage, high efficiency, small size, power scalability, and versatility.

  18. Variable FOV optical illumination system with constant aspect ratio for 2-D array lasers diodes

    NASA Astrophysics Data System (ADS)

    Arasa, J.; de la Fuente, M. C.; Ibañez, C.

    2008-09-01

    In this contribution we present a compact system to create an illumination distribution with a constant aspect ratio 3:4 and FOV from 0.4 to 1 degree. Besides, the system must delivery 40 W from 170 individual laser diodes placed in a regular 2-D array distribution of 10 x 20 mm. The main problem that must be solved is the high asymmetry of the individual sources; emission divergence's ratio 3:73 (0.3 vs. 7.4 degree) combined with the flux holes due to the laser's heat drain. In one axis (divergence of 0.3º) the best design strategy approach is a Galileo telescope but in the other axis a collimator configuration is the best solution. To manage both solutions at the same time is the aim of this contribution. Unfortunately for the Galileo strategy, source dimensions are too large so aspheric surfaces are needed, and the collimator configuration requires an EFL that must change from 573 to 1432 mm. The presented solution uses a set of three fixed anamorphic lenses, two of them pure cylinders, combined with a wheel of anamorphic lenses that have the function to change the FOV of the system. The most important contribution of the design is to obtain a constant final ratio 3:4 from an initial ratio of 3:73 with no losses of energy. The proposed solution produces an illumination pattern with peaks and valleys lower than 40%. This pattern distribution might be unacceptable for a standard illumination solution. However, the actual FOV is used to illuminate far away targets thus air turbulence is enough to homogenize the distribution on the target.

  19. Registration of 2D to 3D joint images using phase-based mutual information

    NASA Astrophysics Data System (ADS)

    Dalvi, Rupin; Abugharbieh, Rafeef; Pickering, Mark; Scarvell, Jennie; Smith, Paul

    2007-03-01

    Registration of two dimensional to three dimensional orthopaedic medical image data has important applications particularly in the area of image guided surgery and sports medicine. Fluoroscopy to computer tomography (CT) registration is an important case, wherein digitally reconstructed radiographs derived from the CT data are registered to the fluoroscopy data. Traditional registration metrics such as intensity-based mutual information (MI) typically work well but often suffer from gross misregistration errors when the image to be registered contains a partial view of the anatomy visible in the target image. Phase-based MI provides a robust alternative similarity measure which, in addition to possessing the general robustness and noise immunity that MI provides, also employs local phase information in the registration process which makes it less susceptible to the aforementioned errors. In this paper, we propose using the complex wavelet transform for computing image phase information and incorporating that into a phase-based MI measure for image registration. Tests on a CT volume and 6 fluoroscopy images of the knee are presented. The femur and the tibia in the CT volume were individually registered to the fluoroscopy images using intensity-based MI, gradient-based MI and phase-based MI. Errors in the coordinates of fiducials present in the bone structures were used to assess the accuracy of the different registration schemes. Quantitative results demonstrate that the performance of intensity-based MI was the worst. Gradient-based MI performed slightly better, while phase-based MI results were the best consistently producing the lowest errors.

  20. Reorientation of the Stripe Phase of 2D Electrons by a Minute Density Modulation

    NASA Astrophysics Data System (ADS)

    Mueed, M. A.; Hossain, Md. Shafayat; Pfeiffer, L. N.; West, K. W.; Baldwin, K. W.; Shayegan, M.

    2016-08-01

    Interacting two-dimensional electrons confined in a GaAs quantum well exhibit isotropic transport when the Fermi level resides in the first excited (N =1 ) Landau level. Adding an in-plane magnetic field (B||) typically leads to an anisotropic, stripelike (nematic) phase of electrons with the stripes oriented perpendicular to the B|| direction. Our experimental data reveal how a periodic density modulation, induced by a surface strain grating from strips of negative electron-beam resist, competes against the B||-induced orientational order of the stripe phase. Even a minute (<0.25 %) density modulation is sufficient to reorient the stripes along the direction of the surface grating.

  1. Guided Lamb wave based 2-D spiral phased array for structural health monitoring of thin panel structures

    NASA Astrophysics Data System (ADS)

    Yoo, Byungseok

    2011-12-01

    In almost all industries of mechanical, aerospace, and civil engineering fields, structural health monitoring (SHM) technology is essentially required for providing the reliable information of structural integrity of safety-critical structures, which can help reduce the risk of unexpected and sometimes catastrophic failures, and also offer cost-effective inspection and maintenance of the structures. State of the art SHM research on structural damage diagnosis is focused on developing global and real-time technologies to identify the existence, location, extent, and type of damage. In order to detect and monitor the structural damage in plate-like structures, SHM technology based on guided Lamb wave (GLW) interrogation is becoming more attractive due to its potential benefits such as large inspection area coverage in short time, simple inspection mechanism, and sensitivity to small damage. However, the GLW method has a few critical issues such as dispersion nature, mode conversion and separation, and multiple-mode existence. Phased array technique widely used in all aspects of civil, military, science, and medical industry fields may be employed to resolve the drawbacks of the GLW method. The GLW-based phased array approach is able to effectively examine and analyze complicated structural vibration responses in thin plate structures. Because the phased sensor array operates as a spatial filter for the GLW signals, the array signal processing method can enhance a desired signal component at a specific direction while eliminating other signal components from other directions. This dissertation presents the development, the experimental validation, and the damage detection applications of an innovative signal processing algorithm based on two-dimensional (2-D) spiral phased array in conjunction with the GLW interrogation technique. It starts with general backgrounds of SHM and the associated technology including the GLW interrogation method. Then, it is focused on the

  2. Electro-Optical Resonant Phase Modulator

    NASA Technical Reports Server (NTRS)

    Chen, Chien-Chung; Robinson, Deborah L.; Hemmati, Hamid

    1993-01-01

    Electro-optical phase modulator includes electro-optical crystal in resonant cavity suitable for use in transmitting digital data on laser beam at data rate of 10 MHz. Switching voltages applied to crystal, thereby switching cavity onto and off resonance, and large phase dispersion occurring near resonance provides output phase modulation. Driving voltages smaller than those of nonresonant modulators. Laser-damage thresholds of apparatus, incorporating bulk optics, inherently greater than modulators based on integrated optics.

  3. Optical phased array radiating optical vortex with manipulated topological charges.

    PubMed

    Ma, Xiaoliang; Pu, Mingbo; Li, Xiong; Huang, Cheng; Pan, Wenbo; Zhao, Bo; Cui, Jianhua; Luo, Xiangang

    2015-02-23

    Optical antennas are key elements in quantum optics emitting and sensing, and behave wide range applications in optical domain. However, integration of optical antenna radiating orbital angular momentum is still a challenge in nano-scale. We theoretically demonstrate a sub-wavelength phased optical antenna array, which manipulates the distribution of the orbital angular momentum in the near field. Orbital angular momentum with topological charge of 4 can be obtained by controlling the phase distribution of the fundamental mode orbital angular momentum in each antenna element. Our results indicate this phased array may be utilized in high integrated optical communication systems.

  4. Intensifying the response of distributed optical fibre sensors using 2D and 3D image restoration

    PubMed Central

    Soto, Marcelo A.; Ramírez, Jaime A.; Thévenaz, Luc

    2016-01-01

    Distributed optical fibre sensors possess the unique capability of measuring the spatial and temporal map of environmental quantities that can be of great interest for several field applications. Although existing methods for performance enhancement have enabled important progresses in the field, they do not take full advantage of all information present in the measured data, still giving room for substantial improvement over the state-of-the-art. Here we propose and experimentally demonstrate an approach for performance enhancement that exploits the high level of similitude and redundancy contained on the multidimensional information measured by distributed fibre sensors. Exploiting conventional image and video processing, an unprecedented boost in signal-to-noise ratio and measurement contrast is experimentally demonstrated. The method can be applied to any white-noise-limited distributed fibre sensor and can remarkably provide a 100-fold improvement in the sensor performance with no hardware modification. PMID:26927698

  5. 2D metal profile detector using a polymeric fiber optic sensor

    NASA Astrophysics Data System (ADS)

    Hua, Wei-Shu; Hooks, Joshua R.; Erwin, Nicholas A.; Wu, Wen-Jong; Wang, Wei-Chih

    2012-04-01

    As sensors become integrated in more applications, interest in magnetostrictive sensor technology has blossomed. Magnetostrictive materials have many advantages and useful applications in daily life, such as high efficient coupling between elastic and polymer material, large displacement, magnetic field sensors, micro actuator and motion motor, etc. The purpose of this paper is to develop a metal sensor which is capable of detecting different geometries and shapes of metal objects. The main configuration is using a Mach-Zehnder fiber-optic interferometer coated with magnetostrictive material. The metal detector system is a novel design of metal detector, easy to fabricate and capable of high sensitivity. In our design, metal detection is made possible by disrupting the magnetic flux density that encompasses the magnetostriction sensor. In this paper, experimental setups are described and metal sensing results are presented. The results of detecting complex metal's geometry and metal's mapping results are discussed.

  6. Polymorphism, crystal nucleation and growth in the phase-field crystal model in 2D and 3D

    NASA Astrophysics Data System (ADS)

    Tóth, Gyula I.; Tegze, György; Pusztai, Tamás; Tóth, Gergely; Gránásy, László

    2010-09-01

    We apply a simple dynamical density functional theory, the phase-field crystal (PFC) model of overdamped conservative dynamics, to address polymorphism, crystal nucleation, and crystal growth in the diffusion-controlled limit. We refine the phase diagram for 3D, and determine the line free energy in 2D and the height of the nucleation barrier in 2D and 3D for homogeneous and heterogeneous nucleation by solving the respective Euler-Lagrange (EL) equations. We demonstrate that, in the PFC model, the body-centered cubic (bcc), the face-centered cubic (fcc), and the hexagonal close-packed structures (hcp) compete, while the simple cubic structure is unstable, and that phase preference can be tuned by changing the model parameters: close to the critical point the bcc structure is stable, while far from the critical point the fcc prevails, with an hcp stability domain in between. We note that with increasing distance from the critical point the equilibrium shapes vary from the sphere to specific faceted shapes: rhombic dodecahedron (bcc), truncated octahedron (fcc), and hexagonal prism (hcp). Solving the equation of motion of the PFC model supplied with conserved noise, solidification starts with the nucleation of an amorphous precursor phase, into which the stable crystalline phase nucleates. The growth rate is found to be time dependent and anisotropic; this anisotropy depends on the driving force. We show that due to the diffusion-controlled growth mechanism, which is especially relevant for crystal aggregation in colloidal systems, dendritic growth structures evolve in large-scale isothermal single-component PFC simulations. An oscillatory effective pair potential resembling those for model glass formers has been evaluated from structural data of the amorphous phase obtained by instantaneous quenching. Finally, we present results for eutectic solidification in a binary PFC model.

  7. Liquid Disordered-Liquid Ordered Phase Coexistence in Lipid/Cholesterol Mixtures: A Deuterium 2D NMR Exchange Study.

    PubMed

    Schmidt, Miranda L; Davis, James H

    2017-02-28

    Model membranes composed of two types of long chain phospholipids, one unsaturated and one saturated, along with cholesterol can exhibit two coexisting fluid phases (liquid disordered ([Formula: see text]) and liquid ordered ([Formula: see text])) at various temperatures and compositions. Here we used 1D and 2D (2)H NMR to compare the behavior of multilamellar dispersions, magnetically oriented bicelles, and mechanically aligned bilayers on glass plates, all of which contain the same proportions of dipalmitoleoylphosphatidylcholine (DPoPC), dimyristoylphosphatidylcholine (DMPC), and cholesterol. We found that multilamellar dispersions and bilayers aligned on glass plates behave very similarly. These samples were close to a critical composition and exhibit exchange of the lipids between the two fluid phases at temperatures near the [Formula: see text] to [Formula: see text]-[Formula: see text] phase boundary. On the other hand, when a short chain lipid is added to the ternary long chain lipid/cholesterol mixture to form bicelles, the phase behavior is changed significantly and the [Formula: see text] phase occurs at a higher than expected temperature. In addition, there was no evidence of exchange of lipids between the [Formula: see text] and [Formula: see text] phases or critical fluctuations at the temperature where the bulk of the sample enters the two-phase region for these bicelles. It appears that the addition of the short chain lipid results in these samples no longer being near a critical composition.

  8. High pH reversed-phase chromatography with fraction concatenation for 2D proteomic analysis

    SciTech Connect

    Yang, Feng; Shen, Yufeng; Camp, David G.; Smith, Richard D.

    2012-04-01

    Orthogonal high-resolution separations are critical for attaining improved analytical dynamic ranges of proteome measurements. Concatenated high pH reversed phase liquid chromatography affords better separations than the strong cation exchange conventionally applied for two-dimensional shotgun proteomic analysis. For example, concatenated high pH reversed phase liquid chromatography increased identification coverage for peptides (e.g., by 1.8-fold) and proteins (e.g., by 1.6-fold) in shotgun proteomics analyses of a digested human protein sample. Additional advantages of concatenated high pH RPLC include improved protein sequence coverage, simplified sample processing, and reduced sample losses, making this an attractive first dimension separation strategy for two-dimensional proteomics analyses.

  9. Phase Diagram of a 2-D Plane Rotator Model with Integer and Half-Integer Vortices

    NASA Astrophysics Data System (ADS)

    de Souza, Adauto J. F.; Landau, D. P.

    1996-03-01

    A two-dimensional plane rotator spin model is simulated by employing the single cluster embeding Monte Carlo technique and the re-weighting histogram analysis. The system is described by the Hamiltonian^1 \\cal H = -J1 sum_< i,j > Si \\cdot Sj - J2 sum_< i,j > ( Si \\cdot Sj )^2. In adition to the familiar integer vortices, this model possesses half-integer vortex excitations as well. The system exhibits three low-temperature phases which may be identified by the behavior of suitably defined two-point correlation functions. The half- and integer-vortex densities as a function of temperature are calculated for several values of the parameter α = J_2/J_1. The phase boundaries are determined and the nature of the phase transitions is investigated. Research supported in part by the CNPq and the NSF. Permanent address: Departmento de Física e Matemática, Universidade Federal Rural de Pernambuco, 52171-900, Recife, Pernambuco, Brazil ^1 D.H. Lee and G. Grinstein Phys. Rev. Lett. \\underline55, 541, (1985)

  10. Combining the switched-beam and beam-steering capabilities in a 2-D phased array antenna system

    NASA Astrophysics Data System (ADS)

    Tsai, Yi-Che; Chen, Yin-Bing; Hwang, Ruey-Bing

    2016-01-01

    This paper presents the development, fabrication, and measurement of a novel beam-forming system consisting of 16 subarray antennas, each containing four aperture-coupled patch antennas, and the application of this system in smart wireless communication systems. The beam patterns of each of the subarray antennas can be switched toward one of nine zones over a half space by adjusting the specific phase delay angles among the four antenna elements. Furthermore, when all subarrays are pointed at the same zone, slightly continuous beam steering in around 1° increments can be achieved by dynamically altering the progressive phase delay angle among the subarrays. Phase angle calibration was implemented by coupling each transmitter output and down converter into the in-phase/quadrature baseband to calculate the correction factor to the weight. In addition, to validate the proposed concepts and the fabricated 2-D phased array antenna system, this study measured the far-field radiation patterns of the aperture-coupled patch array integrated with feeding networks and a phase-calibration system to carefully verify its spatially switched-beam and beam-steering characteristics at a center frequency of 2.4 GHz which can cover the industrial, scientific, and medical band and some long-term evolution applications. In addition, measured results were compared with calculated results, and agreement between them was observed.

  11. Two-dimensional phase unwrapping in Doppler Fourier domain optical coherence tomography.

    PubMed

    Wang, Yimin; Huang, David; Su, Ya; Yao, X Steve

    2016-11-14

    For phase-related imaging modalities using interferometric techniques, it is important to develop effective method to recover phase information that is mathematically wrapped. In this paper, we propose and demonstrate a two-dimensional (2D) method to achieve effective phase unwrapping in Doppler Fourier-domain (FD) optical coherence tomography (OCT), and recover the discontinuous phase distribution in retinal blood flow successfully for the first time in Doppler OCT studies. The proposed method is based on phase gradient approach in the axial dimension, with phase denoising performed through 2D window moving average in the sampled phase image using complex Doppler OCT data. The 2D unwrapping is carried out to correct phase discontinuities in the wrapped Doppler phase map, and the abrupt phase changes can be identified and corrected accurately. The proposed algorithm is computationally efficient and easy to be implemented.

  12. Grade-2 Teflon (AF1601) PCF for optical communication using 2D FDTD technique: a simplest design

    NASA Astrophysics Data System (ADS)

    Muduli, N.; Achary, J. S. N.; Padhy, Hemanta ku.

    2016-04-01

    A nonlinear ytterbium-doped rectangular proposed PCF structure of inner and outer cladding is used to analyze effective mode field area (Aeff), nonlinear coefficient (γ), dispersion (D), and confinement loss (CL) in a wide range of wavelength. The fabrication of PCF structure is due to different size doped air hole, pitch, and air hole diameter in a regular periodic geometrical array fashion. The various property of PCF structure such as mode field area, nonlinear coefficient, dispersion, and confinement loss are analyzed by implementing 2D FDTD technique. The above PCF property investigated using suitable parameters like Λ1, ?, ?, and ? in three different situations is discussed in simulation. The high nonlinear coefficient and dispersion property of PCF structure are tailored by setting the cladding parameter. However, highly nonlinear fibers with nonzero dispersion at the wavelength of 1.55 μm are very attractive for a range of optical communication application such as laser amplifier, pulse compression, wavelength conversion, all optical switching, and supercontinuum generation. So our newly proposed ytterbium-doped PCF seems to be most suitable exclusively for supercontinuum generation and nonlinear fiber optics. Finally, it is observed that ytterbium-doped Teflon (AF1601) PCF has more nonlinear coefficient (γ(λ) = 65.27 W-1 km-1) as compared to pure silica PCF (γ(λ) = 52 W-1 km-1) design to have same mode field area (Aeff) 1.7 μm2 at an operating wavelength of 1.55 μm.

  13. An algorithm for circular test and improved optical configuration by two-dimensional (2D) laser heterodyne interferometer.

    PubMed

    Tang, Shanzhi; Yu, Shengrui; Han, Qingfu; Li, Ming; Wang, Zhao

    2016-09-01

    Circular test is an important tactic to assess motion accuracy in many fields especially machine tool and coordinate measuring machine. There are setup errors due to using directly centring of the measuring instrument for both of contact double ball bar and existed non-contact methods. To solve this problem, an algorithm for circular test using function construction based on matrix operation is proposed, which is not only used for the solution of radial deviation (F) but also should be applied to obtain two other evaluation parameters especially circular hysteresis (H). Furthermore, an improved optical configuration with a single laser is presented based on a 2D laser heterodyne interferometer. Compared with the existed non-contact method, it has a more pure homogeneity of the laser sources of 2D displacement sensing for advanced metrology. The algorithm and modeling are both illustrated. And error budget is also achieved. At last, to validate them, test experiments for motion paths are implemented based on a gantry machining center. Contrast test results support the proposal.

  14. An algorithm for circular test and improved optical configuration by two-dimensional (2D) laser heterodyne interferometer

    NASA Astrophysics Data System (ADS)

    Tang, Shanzhi; Yu, Shengrui; Han, Qingfu; Li, Ming; Wang, Zhao

    2016-09-01

    Circular test is an important tactic to assess motion accuracy in many fields especially machine tool and coordinate measuring machine. There are setup errors due to using directly centring of the measuring instrument for both of contact double ball bar and existed non-contact methods. To solve this problem, an algorithm for circular test using function construction based on matrix operation is proposed, which is not only used for the solution of radial deviation (F) but also should be applied to obtain two other evaluation parameters especially circular hysteresis (H). Furthermore, an improved optical configuration with a single laser is presented based on a 2D laser heterodyne interferometer. Compared with the existed non-contact method, it has a more pure homogeneity of the laser sources of 2D displacement sensing for advanced metrology. The algorithm and modeling are both illustrated. And error budget is also achieved. At last, to validate them, test experiments for motion paths are implemented based on a gantry machining center. Contrast test results support the proposal.

  15. Manganese oxide nanosheets and a 2D hybrid of graphene-manganese oxide nanosheets synthesized by liquid-phase exfoliation

    NASA Astrophysics Data System (ADS)

    Coelho, João; Mendoza-Sánchez, Beatriz; Pettersson, Henrik; Pokle, Anuj; McGuire, Eva K.; Long, Edmund; McKeon, Lorcan; Bell, Alan P.; Nicolosi, Valeria

    2015-06-01

    Manganese oxide nanosheets were synthesized using liquid-phase exfoliation that achieved suspensions in isopropanol (IPA) with concentrations of up to 0.45 mg ml-1. A study of solubility parameters showed that the exfoliation was optimum in N,N-dimethylformamide followed by IPA and diethylene glycol. IPA was the solvent of choice due to its environmentally friendly nature and ease of use for further processing. For the first time, a hybrid of graphene and manganese oxide nanosheets was synthesized using a single-step co-exfoliation process. The two-dimensional (2D) hybrid was synthesized in IPA suspensions with concentrations of up to 0.5 mg ml-1 and demonstrated stability against re-aggregation for up to six months. The co-exfoliation was found to be a energetically favorable process in which both solutes, graphene and manganese oxide nanosheets, exfoliate with an improved yield as compared to the single-solute exfoliation procedure. This work demonstrates the remarkable versatility of liquid-phase exfoliation with respect to the synthesis of hybrids with tailored properties, and it provides proof-of-concept ground work for further future investigation and exploitation of hybrids made of two or more 2D nanomaterials that have key complementary properties for various technological applications.

  16. Unusual Domain Structure and Filamentary Superfluidity for 2D Hard-Core Bosons in Insulating Charge-Ordered Phase

    NASA Astrophysics Data System (ADS)

    Panov, Yu. D.; Moskvin, A. S.; Rybakov, F. N.; Borisov, A. B.

    2016-12-01

    We made use of a special algorithm for compute unified device architecture for NVIDIA graphics cards, a nonlinear conjugate-gradient method to minimize energy functional, and Monte-Carlo technique to directly observe the forming of the ground state configuration for the 2D hard-core bosons by lowering the temperature and its evolution with deviation away from half-filling. The novel technique allowed us to examine earlier implications and uncover novel features of the phase transitions, in particular, look upon the nucleation of the odd domain structure, emergence of filamentary superfluidity nucleated at the antiphase domain walls of the charge-ordered phase, and nucleation and evolution of different topological structures.

  17. A compact acousto-optic lens for 2D and 3D femtosecond based 2-photon microscopy

    PubMed Central

    Kirkby, Paul A.; Naga Srinivas, N.K.M.; Silver, R. Angus

    2010-01-01

    We describe a high speed 3D Acousto-Optic Lens Microscope (AOLM) for femtosecond 2-photon imaging. By optimizing the design of the 4 AO Deflectors (AODs) and by deriving new control algorithms, we have developed a compact spherical AOL with a low temporal dispersion that enables 2-photon imaging at 10-fold lower power than previously reported. We show that the AOLM can perform high speed 2D raster-scan imaging (>150 Hz) without scan rate dependent astigmatism. It can deflect and focus a laser beam in a 3D random access sequence at 30 kHz and has an extended focusing range (>137 μm; 40X 0.8NA objective). These features are likely to make the AOLM a useful tool for studying fast physiological processes distributed in 3D space PMID:20588506

  18. Topological defect formation in 1D and 2D spin chains realized by network of optical parametric oscillators

    NASA Astrophysics Data System (ADS)

    Hamerly, Ryan; Inaba, Kensuke; Inagaki, Takahiro; Takesue, Hiroki; Yamamoto, Yoshihisa; Mabuchi, Hideo

    2016-09-01

    A network of optical parametric oscillators (OPOs) is used to simulate classical Ising and XY spin chains. The collective nonlinear dynamics of this network, driven by quantum noise rather than thermal fluctuations, seeks out the Ising/XY ground state as the system transitions from below to above the lasing threshold. We study the behavior of this “Ising machine” for three canonical problems: a 1D ferromagnetic spin chain, a 2D square lattice and problems where next-nearest-neighbor couplings give rise to frustration. If the pump turn-on time is finite, topological defects form (domain walls for the Ising model, winding number and vortices for XY) and their density can be predicted from a numerical model involving a linear “growth stage” and a nonlinear “saturation stage”. These predictions are compared against recent data for a 10,000-spin 1D Ising machine.

  19. An energy stable, hexagonal finite difference scheme for the 2D phase field crystal amplitude equations

    NASA Astrophysics Data System (ADS)

    Guan, Zhen; Heinonen, Vili; Lowengrub, John; Wang, Cheng; Wise, Steven M.

    2016-09-01

    In this paper we construct an energy stable finite difference scheme for the amplitude expansion equations for the two-dimensional phase field crystal (PFC) model. The equations are formulated in a periodic hexagonal domain with respect to the reciprocal lattice vectors to achieve a provably unconditionally energy stable and solvable scheme. To our knowledge, this is the first such energy stable scheme for the PFC amplitude equations. The convexity of each part in the amplitude equations is analyzed, in both the semi-discrete and fully-discrete cases. Energy stability is based on a careful convexity analysis for the energy (in both the spatially continuous and discrete cases). As a result, unique solvability and unconditional energy stability are available for the resulting scheme. Moreover, we show that the scheme is point-wise stable for any time and space step sizes. An efficient multigrid solver is devised to solve the scheme, and a few numerical experiments are presented, including grain rotation and shrinkage and grain growth studies, as examples of the strength and robustness of the proposed scheme and solver.

  20. FD-TD modeling of 2-D dielectric waveguides for propagation and scattering of femtosecond optical solitons

    NASA Technical Reports Server (NTRS)

    Joseph, Rose; Goorjian, Peter; Taflove, Allen

    1993-01-01

    Experimentalists have produced all-optical switches capable of 100-fs responses. To adequately model such switches, nonlinear effects in optical materials (both instantaneous and dispersive) must be included. In principle, the behavior of electromagnetic fields in nonlinear dielectrics can be determined by solving Maxwell's equations subject to the assumption that the electric polarization has a nonlinear relation to the electric field. However, until our previous work, the resulting nonlinear Maxwell's equations have not been solved directly. Rather, approximations have been made that result in a class of generalized nonlinear Schrodinger equations (GNLSE) that solve only for the envelope of the optical pulses. In this paper, we present first-time calculations from the vector nonlinear Maxwell's equations of femtosecond soliton propagation and scattering, including carrier waves, in two-dimensional systems of dielectric waveguides exhibiting the Kerr and Raman quantum effects. We use the finite-difference time-domain (FD-TD) method in an extension of our 1-D work. There, in a fundamental innovation, we treated the linear and nonlinear convolutions for the electric polarization as new dependent variables. By differentiating these convolutions in the time domain, we derived an equivalent system of coupled, nonlinear second-order ODE's. These equations together with Maxwell's equations form the system that is solved to determine the electromagnetic fields in inhomogeneous nonlinear dispersive media. Backstorage in time is limited to only that needed by the time-integration algorithm for the ODE's, rather than that needed to store the time-history of the kernel functions of the convolutions (1000-10,000 time steps). Thus, a 2-D nonlinear optics model from Maxwell's equations is now feasible.

  1. 2D phase tomography of biotissues: IV. Wavelet processing of phase tomograms of the background and precancerous endometrial states

    NASA Astrophysics Data System (ADS)

    Peresunko, A. P.; Zavadovskya, I. G.

    2004-06-01

    The paper deals with the studying of prognostic possibilities of determining the orientation structure of endometrial strome in the normal state and hiperplasia. The laser diagnostic of endometrial state is based on the principles of optical changes of laser radiation during its passing through the histological sample with the following investigation of its wavelet coefficients.

  2. Impact of phase change kinetics on the Mariana slab within the framework of 2-D mantle convection

    NASA Astrophysics Data System (ADS)

    Yoshioka, Shoichi; Torii, Yoku; Riedel, Michael R.

    2015-03-01

    Recent high-pressure and high-temperature experiments indicate that metastable olivine might persist in the cold core of a slab due to the low reaction rate of the olivine-wadsleyite phase transformation. Recent seismological observations detected a metastable olivine wedge that survives to a depth of 630 km in the Mariana slab. To consider the problem of non-equilibrium phase transformation, we developed a two-dimensional (2-D) Cartesian numerical code that incorporates the effects of kinetics into a thermal convection model. We consider the kinetics of the 410-km olivine-wadsleyite and the 660-km ringwoodite-Pv + Mw phase transformations, including the effects of water content at the 410-km phase boundary. The latent heat release of the 410-km non-equilibrium phase transformations inside the slab is also considered. The results show positive correlations between some of the controlling parameters and the length of the metastable olivine wedge: the faster the subducting velocity, and the lower the water content, the deeper is the metastable olivine wedge. With increasing depth of phase transformation, the effect of latent heat release is enhanced: heating of, at most, 100 °C occurs if olivine transforms into wadsleyite at a depth of approximately 570 km in our model setting. Temperature increase due to the latent heat released stimulates further phase transformation, resulting in further temperature increase, acting as a positive feedback effect. We also attempt to explain the seismological observations by calculating the temperature and phase structures in the Mariana slab. If we assume that the age of the Mariana slab is 150 Myr, the subduction velocity is 9.5 cm/yr, phase transformation occurs from the grain boundary of the parental phase, and the water content is 250 wt. ppm for a grain size of 1 mm, 300 wt. ppm for one of 5 mm, and 100 wt. ppm for intracrystalline transformation, then the metastable olivine wedge survives to a depth of 630 km, which is in

  3. Strain Insensitive Optical Phase Locked Loop

    NASA Technical Reports Server (NTRS)

    Egalon, Claudio O. (Inventor); Rogowski, Robert S. (Inventor)

    1998-01-01

    A strain sensor uses optical fibers including strain insensitive portions and a strain sensitive portion. The optical fibers form a sensitive arm of an optical phase locked loop (OPLL). The use of the OPLL allows for multimode optical fiber to be used in a strain insensitive configuration. Only strain information for the strain sensitive portion is monitored rather than the integrated strain measurements commonly made with optical fiber sensors.

  4. 1 kHz 2D Visual Motion Sensor Using 20 × 20 Silicon Retina Optical Sensor and DSP Microcontroller.

    PubMed

    Liu, Shih-Chii; Yang, MinHao; Steiner, Andreas; Moeckel, Rico; Delbruck, Tobi

    2015-04-01

    Optical flow sensors have been a long running theme in neuromorphic vision sensors which include circuits that implement the local background intensity adaptation mechanism seen in biological retinas. This paper reports a bio-inspired optical motion sensor aimed towards miniature robotic and aerial platforms. It combines a 20 × 20 continuous-time CMOS silicon retina vision sensor with a DSP microcontroller. The retina sensor has pixels that have local gain control and adapt to background lighting. The system allows the user to validate various motion algorithms without building dedicated custom solutions. Measurements are presented to show that the system can compute global 2D translational motion from complex natural scenes using one particular algorithm: the image interpolation algorithm (I2A). With this algorithm, the system can compute global translational motion vectors at a sample rate of 1 kHz, for speeds up to ±1000 pixels/s, using less than 5 k instruction cycles (12 instructions per pixel) per frame. At 1 kHz sample rate the DSP is 12% occupied with motion computation. The sensor is implemented as a 6 g PCB consuming 170 mW of power.

  5. 1-D, 2-D and 3-D Negative-Refraction Metamaterials at Optical Frequencies: Optical Nano-Transmission-Line and Circuit Theory

    NASA Astrophysics Data System (ADS)

    Engheta, Nader; Alu, Andrea

    2006-03-01

    In recent years metamaterials have offered new possibilities for overcoming some of the intrinsic limitations in wave propagation. Their realization at microwave frequencies has followed two different paths; one consisting of embedding resonant inclusions in a host dielectric, and the other following a transmission-line approach, i.e., building 1-D, 2-D, or 3-D cascades of circuit elements, respectively, as linear, planar or bulk right- or left-handed metamaterials. The latter is known to provide larger bandwidth and better robustness to ohmic losses. Extending these concepts to optical frequencies is a challenging task, due to changes in material response to electromagnetic waves at these frequencies. However, recently we have studied theoretically how it may be possible to have circuit nano-elements at these frequencies by properly exploiting plasmonic resonances. Here we present our theoretical work on translating the circuit concepts of right- and left-handed metamaterials into optical frequencies by applying the analogy between nanoparticles and nanocircuit elements in transmission lines. We discuss how it is possible to synthesize optical negative-refraction metamaterials by properly cascading plasmonic and non-plasmonic elements in 1-D, 2-D and 3-D geometries.

  6. Solving structure in the CP29 light harvesting complex with polarization-phased 2D electronic spectroscopy

    PubMed Central

    Ginsberg, Naomi S.; Davis, Jeffrey A.; Ballottari, Matteo; Cheng, Yuan-Chung; Bassi, Roberto; Fleming, Graham R.

    2011-01-01

    The CP29 light harvesting complex from green plants is a pigment-protein complex believed to collect, conduct, and quench electronic excitation energy in photosynthesis. We have spectroscopically determined the relative angle between electronic transition dipole moments of its chlorophyll excitation energy transfer pairs in their local protein environments without relying on simulations or an X-ray crystal structure. To do so, we measure a basis set of polarized 2D electronic spectra and isolate their absorptive components on account of the tensor relation between the light polarization sequences used to obtain them. This broadly applicable advance further enhances the acuity of polarized 2D electronic spectroscopy and provides a general means to initiate or feed back on the structural modeling of electronically-coupled chromophores in condensed phase systems, tightening the inferred relations between the spatial and electronic landscapes of ultrafast energy flow. We also discuss the pigment composition of CP29 in the context of light harvesting, energy channeling, and photoprotection within photosystem II. PMID:21321222

  7. An Efficient Solution-Phase Synthesis of 4,5,7-Trisubstituted Pyrrolo[3,2-d]pyrimidines

    PubMed Central

    Zhang, Weihe; Liu, Jing; Stashko, Michael A.; Wang, Xiaodong

    2013-01-01

    We have developed an efficient and robust route to synthesize 4,5,7-trisubstituted pyrrolo[3,2-d]pyrimidines as potent kinase inhibitors. This solution-phase synthesis features a SNAr substitution reaction, cross-coupling reaction, one-pot reduction/reductive amination and N-alkylation reaction. These reactions occur rapidly with high yields and have broad substrate scopes. A variety of groups can be selectively introduced into the N5 and C7 positions of 4,5,7-trisubstituted pyrrolopyrimidines at a late stage of the synthesis, thereby providing a highly efficient approach to explore the structure-activity relationships of pyrrolopyrimidine derivatives. Four synthetic analogs have been profiled against a panel of 48 kinases and a new and selective FLT3 inhibitor 9 is identified. PMID:23181516

  8. Robust initialization of 2D-3D image registration using the projection-slice theorem and phase correlation

    SciTech Connect

    Bom, M. J. van der; Bartels, L. W.; Gounis, M. J.; Homan, R.; Timmer, J.; Viergever, M. A.; Pluim, J. P. W.

    2010-04-15

    Purpose: The image registration literature comprises many methods for 2D-3D registration for which accuracy has been established in a variety of applications. However, clinical application is limited by a small capture range. Initial offsets outside the capture range of a registration method will not converge to a successful registration. Previously reported capture ranges, defined as the 95% success range, are in the order of 4-11 mm mean target registration error. In this article, a relatively computationally inexpensive and robust estimation method is proposed with the objective to enlarge the capture range. Methods: The method uses the projection-slice theorem in combination with phase correlation in order to estimate the transform parameters, which provides an initialization of the subsequent registration procedure. Results: The feasibility of the method was evaluated by experiments using digitally reconstructed radiographs generated from in vivo 3D-RX data. With these experiments it was shown that the projection-slice theorem provides successful estimates of the rotational transform parameters for perspective projections and in case of translational offsets. The method was further tested on ex vivo ovine x-ray data. In 95% of the cases, the method yielded successful estimates for initial mean target registration errors up to 19.5 mm. Finally, the method was evaluated as an initialization method for an intensity-based 2D-3D registration method. The uninitialized and initialized registration experiments had success rates of 28.8% and 68.6%, respectively. Conclusions: The authors have shown that the initialization method based on the projection-slice theorem and phase correlation yields adequate initializations for existing registration methods, thereby substantially enlarging the capture range of these methods.

  9. Optical Heterodyne With Lower Phase Noise

    NASA Technical Reports Server (NTRS)

    Logan, Ronald T.

    1994-01-01

    Proposed improvement enhances utility of optical-heterodyne apparatus used to generate radio signal at chosen frequency between 1 and 1,000 GHz. Two lasers injection-locked to third, mode-locked laser. Beat-frequency heterodyne output contains much less phase noise if generated from outputs of two independent lasers, and phase-coherent with reference signal. Potential applications include phased-array radar, fiber-optic communication systems, fiber-optic stabilized oscillators, and other applications involving conversions between optical and millimeter-wave signals.

  10. Butterfly magnetoresistance, quasi-2D Dirac Fermi surface and topological phase transition in ZrSiS.

    PubMed

    Ali, Mazhar N; Schoop, Leslie M; Garg, Chirag; Lippmann, Judith M; Lara, Erik; Lotsch, Bettina; Parkin, Stuart S P

    2016-12-01

    Magnetoresistance (MR), the change of a material's electrical resistance in response to an applied magnetic field, is a technologically important property that has been the topic of intense study for more than a quarter century. We report the observation of an unusual "butterfly"-shaped titanic angular magnetoresistance (AMR) in the nonmagnetic Dirac material, ZrSiS, which we find to be the most conducting sulfide known, with a 2-K resistivity as low as 48(4) nΩ⋅cm. The MR in ZrSiS is large and positive, reaching nearly 1.8 × 10(5) percent at 9 T and 2 K at a 45° angle between the applied current (I || a) and the applied field (90° is H || c). Approaching 90°, a "dip" is seen in the AMR, which, by analyzing Shubnikov de Haas oscillations at different angles, we find to coincide with a very sharp topological phase transition unlike any seen in other known Dirac/Weyl materials. We find that ZrSiS has a combination of two-dimensional (2D) and 3D Dirac pockets comprising its Fermi surface and that the combination of high-mobility carriers and multiple pockets in ZrSiS allows for large property changes to occur as a function of angle between applied fields. This makes it a promising platform to study the physics stemming from the coexistence of 2D and 3D Dirac electrons as well as opens the door to creating devices focused on switching between different parts of the Fermi surface and different topological states.

  11. Butterfly magnetoresistance, quasi-2D Dirac Fermi surface and topological phase transition in ZrSiS

    PubMed Central

    Ali, Mazhar N.; Schoop, Leslie M.; Garg, Chirag; Lippmann, Judith M.; Lara, Erik; Lotsch, Bettina; Parkin, Stuart S. P.

    2016-01-01

    Magnetoresistance (MR), the change of a material’s electrical resistance in response to an applied magnetic field, is a technologically important property that has been the topic of intense study for more than a quarter century. We report the observation of an unusual “butterfly”-shaped titanic angular magnetoresistance (AMR) in the nonmagnetic Dirac material, ZrSiS, which we find to be the most conducting sulfide known, with a 2-K resistivity as low as 48(4) nΩ⋅cm. The MR in ZrSiS is large and positive, reaching nearly 1.8 × 105 percent at 9 T and 2 K at a 45° angle between the applied current (I || a) and the applied field (90° is H || c). Approaching 90°, a “dip” is seen in the AMR, which, by analyzing Shubnikov de Haas oscillations at different angles, we find to coincide with a very sharp topological phase transition unlike any seen in other known Dirac/Weyl materials. We find that ZrSiS has a combination of two-dimensional (2D) and 3D Dirac pockets comprising its Fermi surface and that the combination of high-mobility carriers and multiple pockets in ZrSiS allows for large property changes to occur as a function of angle between applied fields. This makes it a promising platform to study the physics stemming from the coexistence of 2D and 3D Dirac electrons as well as opens the door to creating devices focused on switching between different parts of the Fermi surface and different topological states. PMID:28028541

  12. 2D time domain spectral phase encoding/wavelength hopping coherent DPSK-OCDMA system using fiber Bragg gratings and phase modulator

    NASA Astrophysics Data System (ADS)

    Gao, Zhensen; Dai, Bo; Wang, Xu; Kataoka, Nobuyuki; Wada, Naoya

    2010-12-01

    We propose and experimentally demonstrate a reconfigurable two-dimensional (temporal-spectral) time domain spectral phase encoding (SPE) scheme for coherent optical code-division-multiple-access (OCDMA) application. The time-domain SPE scheme is robust to wavelength drift of the light source and is very flexible and compatible with the fiber optical system. In the proposed scheme, the ultra-short optical pulse is stretched by dispersive device and the SPE is done in time domain using high speed phase modulator. A Fiber Bragg Gratings array is used for generating the two-dimensional wavelength hopping pattern while the high speed phase modulator is used for generating the spectral phase pattern. The proposed scheme can enable simultaneous generation of the time domain spectral phase encoding and DPSK data modulation using only a single phase modulator. In the experiment, the two-dimensional SPE codes have been generated and modulated with 2.5-Gb/s DPSK data using a single phase modulator. Transmission of the 2.5-Gb/s DPSK data over 49km fiber with BER<10-9 has been demonstrated successfully. The proposed scheme exhibits the potential to simplify the architecture and improve the security of the OCDMA system.

  13. Reference-free PRFS MR-thermometry using near-harmonic 2-D reconstruction of the background phase.

    PubMed

    Salomir, Rares; Viallon, Magalie; Kickhefel, Antje; Roland, Joerg; Morel, Denis R; Petrusca, Lorena; Auboiroux, Vincent; Goget, Thomas; Terraz, Sylvain; Becker, Christoph D; Gross, Patrick

    2012-02-01

    Proton resonance frequency shift (PRFS) MR thermometry (MRT) is the generally preferred method for monitoring thermal ablation, typically implemented with gradient-echo (GRE) sequences. Standard PRFS MRT is based on the subtraction of a temporal reference phase map and is, therefore, intrinsically sensitive to tissue motion (including deformation) and to external perturbation of the magnetic field. Reference-free (or reference-less) PRFS MRT has been previously described by Rieke and was based on a 2-D polynomial fit performed on phase data from outside the heated region, to estimate the background phase inside the region of interest. While their approach was undeniably a fundamental progress in terms of robustness against tissue motion and magnetic perturbations, the underlying mathematical formalism requires a thick unheated border and may be subject to numerical instabilities with high order polynomials. A novel method of reference-free PRFS MRT is described here, using a physically consistent formalism, which exploits mathematical properties of the magnetic field in a homogeneous or near-homogeneous medium. The present implementation requires as input the MR GRE phase values along a thin, nearly-closed and unheated border. This is a 2-D restriction of a classic Dirichlet problem, working on a slice per slice basis. The method has been validated experimentally by comparison with the “ground truth” data, considered to be the standard PRFS method for static ex vivo tissue. “Zero measurement” of the gradient-echo phase baseline was performed in healthy volunteer liver with rapid acquisition (300 ms/image). In vivo data acquired in sheep liver during MR-guided high intensity focused ultrasound (MRgHIFU) sonication were post-processed as proof of applicability in a therapeutic scenario. Bland and Altman mean absolute difference between the novel method and the “ground truth” thermometry in ex vivo static tissue ranged between 0.069 °C and 0.968

  14. Progress in the development and demonstration of a 2D-matrix phased array ultrasonic probe for under-sodium viewing

    NASA Astrophysics Data System (ADS)

    Larche, M. R.; Baldwin, D. L.; Edwards, M. K.; Mathews, R. A.; Prowant, M. S.; Diaz, A. A.

    2016-02-01

    Optically opaque liquid sodium used in liquid metal fast reactors poses a unique set of challenges for nondestructive evaluation. The opaque nature of the sodium prevents visual examinations of components within this medium, but ultrasonic waves are able to propagate through sodium so an ultrasonic testing (UT) technique can be applied for imaging objects in sodium. A UT sensor used in liquid sodium during a refueling outage must be capable of withstanding the 260°C corrosive environment and must also be able to wet (couple the ultrasonic waves) so that sound can propagate into the sodium. A multi-year iterative design effort, based on earlier work in the 1970s, has set out to improve the design and fabrication processes needed for a UT sensor technology capable of overcoming the temperature and wetting issues associated with this environment. Robust materials and improved fabrication processes have resulted in single-element sensors and two different linear-array sensors that have functioned in liquid sodium. More recent efforts have been focused on improving signal-to-noise ratio and image resolution in the highly attenuating liquid sodium. In order to accomplish this, modeling and simulation tools were used to design a 60-element 2D phased-array sensor operating at 2 MHz that features a separate transmitter and receiver. This design consists of 30 transmit elements and another 30 receive elements, each arranged in a rectangular matrix pattern that is 10 rows tall and 3 wide. The fabrication of this 2D array is currently underway and will be followed by a series of performance tests in water, hot oil, and finally in liquid sodium at 260°C. The performance testing cycle will evaluate multiple characteristics of the sensor that are crucial to performance including: transmit-uniformity, element sensitivity variations, element-to-element energy leakage, sound field dimensions, and spatial resolution. This paper will present a summary of results from the previous UT

  15. Characterization of Al2O3 optically stimulated luminescence films for 2D dosimetry using a 6 MV photon beam

    NASA Astrophysics Data System (ADS)

    Ahmed, M. F.; Shrestha, N.; Schnell, E.; Ahmad, S.; Akselrod, M. S.; Yukihara, E. G.

    2016-11-01

    This work evaluates the dosimetric properties of newly developed optically stimulated luminescence (OSL) films, fabricated with either Al2O3:C or Al2O3:C,Mg, using a prototype laser scanning reader, a developed image reconstruction algorithm, and a 6 MV therapeutic photon beam. Packages containing OSL films (Al2O3:C and Al2O3:C,Mg) and a radiochromic film (Gafchromic EBT3) were irradiated using a 6 MV photon beam using different doses, field sizes, with and without wedge filter. Dependence on film orientation of the OSL system was also tested. Diode-array (MapCHECK) and ionization chamber measurements were performed for comparison. The OSLD film doses agreed with the MapCHECK and ionization chamber data within the experimental uncertainties (<2% at 1.5 Gy). The system background and minimum detectable dose (MDD) were  <0.5 mGy, and the dose response was approximately linear from the MDD up to a few grays (the linearity correction was  <10% up to ~2-4 Gy), with no saturation up to 30 Gy. The dose profiles agreed with those obtained using EBT3 films (analyzed using the triple channel method) in the high dose regions of the images. In the low dose regions, the dose profiles from the OSLD films were more reproducible than those from the EBT3 films. We also demonstrated that the OSL film data are independent on scan orientation and field size over the investigated range. The results demonstrate the potential of OSLD films for 2D dosimetry, particularly for the characterization of small fields, due to their wide dynamic range, linear response, resolution and dosimetric properties. The negligible background and potential simple calibration make these OSLD films suitable for remote audits. The characterization presented here may motivate further commercial development of a 2D dosimetry system based on the OSL from Al2O3:C or Al2O3:C,Mg.

  16. Multilayer Dielectric Transmissive Optical Phase Modulator

    NASA Technical Reports Server (NTRS)

    Keys, Andrew Scott; Fork, Richard Lynn

    2004-01-01

    A multilayer dielectric device has been fabricated as a prototype of a low-loss, low-distortion, transmissive optical phase modulator that would provide as much as a full cycle of phase change for all frequency components of a transmitted optical pulse over a frequency band as wide as 6.3 THz. Arrays of devices like this one could be an alternative to the arrays of mechanically actuated phase-control optics (adaptive optics) that have heretofore been used to correct for wave-front distortions in highly precise optical systems. Potential applications for these high-speed wave-front-control arrays of devices include agile beam steering, optical communications, optical metrology, optical tracking and targeting, directional optical ranging, and interferometric astronomy. The device concept is based on the same principle as that of band-pass interference filters made of multiple dielectric layers with fractional-wavelength thicknesses, except that here there is an additional focus on obtaining the desired spectral phase profile in addition to the device s spectral transmission profile. The device includes a GaAs substrate, on which there is deposited a stack of GaAs layers alternating with AlAs layers, amounting to a total of 91 layers. The design thicknesses of the layers range from 10 nm to greater than 1 micrometer. The number of layers and the thickness of each layer were chosen in a computational optimization process in which the wavelength dependences of the indices of refraction of GaAs and AlAs were taken into account as the design was iterated to maximize the transmission and minimize the group-velocity dispersion for a wavelength band wide enough to include all significant spectral components of the pulsed optical signal to be phase modulated.

  17. Hidden landscapes in thin film topological insulators: between order and disorder, 2D and 3D, normal and topological phases

    NASA Astrophysics Data System (ADS)

    Oh, Seongshik

    Topological insulator (TI) is one of the rare systems in the history of condensed matter physics that is initiated by theories and followed by experiments. Although this theory-driven advance helped move the field quite fast despite its short history, apparently there exist significant gaps between theories and experiments. Many of these discrepancies originate from the very fact that the worlds readily accessible to theories are often far from the real worlds that are available in experiments. For example, the very paradigm of topological protection of the surface states on Z2 TIs such as Bi2Se3, Bi2Te3, Sb2Te3, etc, is in fact valid only if the sample size is infinite and the crystal momentum is well-defined in all three dimensions. On the other hand, many widely studied forms of TIs such as thin films and nano-wires have significant confinement in one or more of the dimensions with varying level of disorders. In other words, many of the real world topological systems have some important parameters that are not readily captured by theories, and thus it is often questionable how far the topological theories are valid to real systems. Interestingly, it turns out that this very uncertainty of the theories provides additional control knobs that allow us to explore hidden topological territories. In this talk, I will discuss how these additional knobs in thin film topological insulators reveal surprising, at times beautiful, landscapes at the boundaries between order and disorder, 2D and 3D, normal and topological phases. This work is supported by Gordon and Betty Moore Foundation's EPiQS Initiative (GBMF4418).

  18. Demonstration of Berry Phase in Optical Spectroscopy

    NASA Technical Reports Server (NTRS)

    Xia, Hui-Rong; Zhang, Yong; Jiang, Hong-Ji; Ding, Liang-En

    1996-01-01

    In this paper we demonstrate that the observed phase shift of the RF signal and its intensity dependence under extreme low pump and probe laser field conditions are dominated by Berry phase effect in optical spectroscopy with good adiabatic approximation, which provides all features' agreements between the theoretical and the experimental results.

  19. Search for Optical Binding with Shape Phase Holographic Optical Trapping

    NASA Astrophysics Data System (ADS)

    Roichman, Yohai; Polin, Marco; Cholis, Ilias; Grier, David

    2007-03-01

    Light scattered by an illuminated particle should repel that particle's neighbors through radiation pressure. Nearly two decades ago, Burns, Fournier and Golovchenko (BFG) proposed that the coherent superposition of scattered fields can lead to an attractive interparticle interaction, which they called optical binding. Their pioneering experimental observation has generated considerable interest, most of which has focused on developing the theory for the effect. Accurate measurements of the optical binding force in the BFG geometry have been lacking, however. The need to quantify optical binding forces is particularly acute for colloidal interaction measurements on linear optical traps. We present a new method to directly measure optical binding forces between colloidal spheres that exploits the ability of shape-phase holography to create linear optical traps with accurately specified intensity and phase profiles. Our ability to control the trap's phase profile makes possible precise discrimination between intensity- and field-dependent interactions, i.e. between radiation pressure and optical binding. The same novel technique that allows us to project holographic line traps also can be used to project two- and three-dimensionally structured ring traps, novel Bessel-beam traps, which we also will describe.

  20. Optical vortex phase-shifting digital holography.

    PubMed

    Guo, Cheng-Shan; Cheng, Xin; Ren, Xiu-Yun; Ding, Jian-Ping; Wang, Hui-Tian

    2004-10-18

    We report a new optical vortex phase-shifting method for digital holography, in which an optical vortex mode is taken as the reference beam for holographic recording, and the required phase shifts are directly generated by rotating the vortex mode. In digital reconstruction, the complex amplitude of the object wave can be retrieved by use of the conventional phase shifting algorithm on condition that the digital illumination beam is replaced by an vortex beam with the same topological charge as the reference used. Both the theoretical analysis and experimental results demonstrate the feasibility of this approach.

  1. Optically tuneable blue phase photonic band gaps

    SciTech Connect

    Liu, H.-Y.; Wang, C.-T.; Hsu, C.-Y.; Lin, T.-H.; Liu, J.-H.

    2010-03-22

    This study investigates an optically switchable band gap of photonic crystal that is based on an azobenzene-doped liquid crystal blue phase. The trans-cis photoisomerization of azobenzene deforms the cubic unit cell of the blue phase and shifts the photonic band gap. The fast back-isomerization of azobenzene was induced by irradiation with different wavelengths light. The crystal structure is verified using Kossel diffraction diagram. An optically addressable blue phase display, based on Bragg reflection from the photonic band gap, is also demonstrated. The tunable ranges are around red, green, and blue wavelengths and exhibit a bright saturated color.

  2. Probing exoplanet clouds with optical phase curves.

    PubMed

    Muñoz, Antonio García; Isaak, Kate G

    2015-11-03

    Kepler-7b is to date the only exoplanet for which clouds have been inferred from the optical phase curve--from visible-wavelength whole-disk brightness measurements as a function of orbital phase. Added to this, the fact that the phase curve appears dominated by reflected starlight makes this close-in giant planet a unique study case. Here we investigate the information on coverage and optical properties of the planet clouds contained in the measured phase curve. We generate cloud maps of Kepler-7b and use a multiple-scattering approach to create synthetic phase curves, thus connecting postulated clouds with measurements. We show that optical phase curves can help constrain the composition and size of the cloud particles. Indeed, model fitting for Kepler-7b requires poorly absorbing particles that scatter with low-to-moderate anisotropic efficiency, conclusions consistent with condensates of silicates, perovskite, and silica of submicron radii. We also show that we are limited in our ability to pin down the extent and location of the clouds. These considerations are relevant to the interpretation of optical phase curves with general circulation models. Finally, we estimate that the spherical albedo of Kepler-7b over the Kepler passband is in the range 0.4-0.5.

  3. Probing exoplanet clouds with optical phase curves

    PubMed Central

    Muñoz, Antonio García; Isaak, Kate G.

    2015-01-01

    Kepler-7b is to date the only exoplanet for which clouds have been inferred from the optical phase curve—from visible-wavelength whole-disk brightness measurements as a function of orbital phase. Added to this, the fact that the phase curve appears dominated by reflected starlight makes this close-in giant planet a unique study case. Here we investigate the information on coverage and optical properties of the planet clouds contained in the measured phase curve. We generate cloud maps of Kepler-7b and use a multiple-scattering approach to create synthetic phase curves, thus connecting postulated clouds with measurements. We show that optical phase curves can help constrain the composition and size of the cloud particles. Indeed, model fitting for Kepler-7b requires poorly absorbing particles that scatter with low-to-moderate anisotropic efficiency, conclusions consistent with condensates of silicates, perovskite, and silica of submicron radii. We also show that we are limited in our ability to pin down the extent and location of the clouds. These considerations are relevant to the interpretation of optical phase curves with general circulation models. Finally, we estimate that the spherical albedo of Kepler-7b over the Kepler passband is in the range 0.4–0.5. PMID:26489652

  4. Fiber optic microbend phase shifter and modulator

    NASA Astrophysics Data System (ADS)

    Taylor, H. F.

    1985-09-01

    The present invention relates generally to a fiber optic phase shifter and intensity modulator and more particularly to fiber optic phase shifters and modulators that utilize a microbend transducer. The ability to shift the phase of light propagating in a single mode fiber is quite useful in fiber optic sensors and may also be used in fiber-optic communications. A conventional way to shift the phase of light propagating in a single mode fiber is by stretching the fiber. This is done by wrapping and gluing the fiber around a cylinder of piezoelectric material. When a voltage is applied to the material, the cylinder expands thereby stretching the fiber. Long lengths on the order of 10 meters of fiber and large voltages are needed to drive the piezoelectric cylinder. The ability to modulate the intensity of light propagating in a optic fiber is also useful in fiber optic communication and sensing systems. Such modulation can be performed by a device external to the fiber such as an electrooptic modulator formed in a lithium niobate crystal.

  5. Phase Length Optical Phase-Locked-Loop Sensor

    NASA Technical Reports Server (NTRS)

    Heyman, Joseph S. (Inventor)

    1988-01-01

    The invention is a device that provides a high resolution measurement of the change in optical phase length from the device optical system source to an optical reflector. The invention consists of a optical phase locked loop that uses a laser beam as a carrier of an intensity modulated energy source. The novelty of the invention appears to lie in the overall combination of elements which provide high resolution without loss of wide dynamic range. The invention does not depend on coherent reflection from a target, and thus can measure targets that do not have special preparation or corner reflectors. The use of carrier modulation achieves high resolution without the problems of high speed pulse duration systems. Thus the invention has the advantages of simplicity, low cost, and small size without sacrificing resolution.

  6. Digital polarization holography advancing geometrical phase optics.

    PubMed

    De Sio, Luciano; Roberts, David E; Liao, Zhi; Nersisyan, Sarik; Uskova, Olena; Wickboldt, Lloyd; Tabiryan, Nelson; Steeves, Diane M; Kimball, Brian R

    2016-08-08

    Geometrical phase or the fourth generation (4G) optics enables realization of optical components (lenses, prisms, gratings, spiral phase plates, etc.) by patterning the optical axis orientation in the plane of thin anisotropic films. Such components exhibit near 100% diffraction efficiency over a broadband of wavelengths. The films are obtained by coating liquid crystalline (LC) materials over substrates with patterned alignment conditions. Photo-anisotropic materials are used for producing desired alignment conditions at the substrate surface. We present and discuss here an opportunity of producing the widest variety of "free-form" 4G optical components with arbitrary spatial patterns of the optical anisotropy axis orientation with the aid of a digital spatial light polarization converter (DSLPC). The DSLPC is based on a reflective, high resolution spatial light modulator (SLM) combined with an "ad hoc" optical setup. The most attractive feature of the use of a DSLPC for photoalignment of nanometer thin photo-anisotropic coatings is that the orientation of the alignment layer, and therefore of the fabricated LC or LC polymer (LCP) components can be specified on a pixel-by-pixel basis with high spatial resolution. By varying the optical magnification or de-magnification the spatial resolution of the photoaligned layer can be adjusted to an optimum for each application. With a simple "click" it is possible to record different optical components as well as arbitrary patterns ranging from lenses to invisible labels and other transparent labels that reveal different images depending on the side from which they are viewed.

  7. Application of the conservation of etendue theorem for 2-D subdomains of the phase space in nonimaging concentrators

    SciTech Connect

    Minano, J.C.

    1984-06-15

    The conservation of etendue for general 2-D bundles of rays (not necessarily coplanar) is examined (a 2-D bundle of rays is that whose rays are distinguishable by giving each one two parameters). This is one of the integral invariants of Poincare and it is directly related to the Lagrange invariant. The application of this theorem to selected 2-D bundles of rays crossing an arbitrary cylindrical concentrator gives us a relationship between the maximum geometrical concentration of a cylindrical and the angular field of view which is more restrictive than the general one (i.e., the relationship is valid for an arbitrary concentrator) when the collector is surrounded by a refractive medium.

  8. Wannier-Stark electro-optical effect, quasi-guided and photonic modes in 2D macroporous silicon structures with SiO2 coatings

    NASA Astrophysics Data System (ADS)

    Karachevtseva, L.; Goltviansky, Yu.; Sapelnikova, O.; Lytvynenko, O.; Stronska, O.; Bo, Wang; Kartel, M.

    2016-12-01

    Opportunities to enhance the properties of structured surfaces were demonstrated on 2D macroporous silicon structures with SiO2 coatings. We investigated the IR light absorption oscillations in macroporous silicon structures with SiO2 coatings 0-800 nm thick. The Wannier-Stark electro-optical effect due to strong electric field on Si-SiO2boundary and an additional electric field of quasi-guided optical modes were taken into account. The photonic modes and band gaps were also considered as peculiarities in absorbance spectra of macroporous silicon structures with a thick SiO2 coating. The photonic modes do not coincide with the quasi-guided modes in the silicon matrix and do not appear in absorption spectra of 2D macroporous silicon structures with surface nanocrystals.

  9. Anisotropic 2D Larkin-Imry-Ma state in the polar distorted ABM phase of 3He in a "nematically ordered" aerogel

    NASA Astrophysics Data System (ADS)

    Askhadullin, R. Sh.; Dmitriev, V. V.; Martynov, P. N.; Osipov, A. A.; Senin, A. A.; Yudin, A. N.

    2015-01-01

    We present results of experiments in superfluid phases of 3He confined in aerogel which strands are nearly parallel to one another. High temperature superfluid phases of 3He in this aerogel (ESP1 and ESP2) are biaxial chiral phases and have polar distorted ABM order parameter which orbital part forms 2D Larkin-Imry-Ma state. We demonstrate that this state can be anisotropic if the aerogel is squeezed in direction transverse to the strands. Values of this anisotropy in ESP1 and ESP2 phases are different, what leads to different NMR properties.

  10. All-optical phase discrimination using SOA.

    PubMed

    Power, Mark J; Webb, Roderick P; Manning, Robert J

    2013-11-04

    We describe the first experimental demonstration of a novel all-optical phase discrimination technique, which can separate the two orthogonal phase components of a signal onto different frequencies. This method exploits nonlinear mixing in a semiconductor optical amplifier (SOA) to separate a 10.65 Gbaud QPSK signal into two 10.65 Gb/s BPSK signals which are then demodulated using a delay interferometer (DI). Eye diagrams and spectral measurements verify correct operation and a conversion efficiency greater than 9 dB is observed on both output BPSK channels when compared with the input QPSK signal.

  11. Development of hydraulic fracture network propagation model in shale gas reservoirs: 2D, single-phase and 3D, multi-phase model development, parametric studies, and verification

    NASA Astrophysics Data System (ADS)

    Ahn, Chong Hyun

    The most effective method for stimulating shale gas reservoirs is a massive hydraulic fracture treatment. Recent analysis using microseismic technology have shown that complex fracture networks are commonly created in the field as a result of the stimulation of shale wells. The interaction between pre-existing natural fractures and the propagating hydraulic fracture is a critical factor affecting the created complex fracture network; however, many existing numerical models simulate only planar hydraulic fractures without considering the pre-existing fractures in the formation. The shale formations already contain a large number of natural fractures, so an accurate fracture propagation model needs to be developed to optimize the fracturing process. In this research, we first characterized the mechanics of hydraulic fracturing and fluid flow in the shale gas reservoir. Then, a 2D, single-phase numerical model and a 3D, 2-phase coupled model were developed, which integrate dynamic fracture propagation, interactions between hydraulic fractures and pre-existing natural fractures, fracture fluid leakoff, and fluid flow in a petroleum reservoir. By using the developed model, we conducted parametric studies to quantify the effects of treatment rate, treatment size, fracture fluid viscosity, differential horizontal stress, natural fracture spacing, fracture toughness, matrix permeability, and proppant size on the geometry of the hydraulic fracture network. The findings elucidate important trends in hydraulic fracturing of shale reservoirs that are useful in improving the design of treatments for specific reservoir settings.

  12. Layered ternary M n+1AX n phases and their 2D derivative MXene: an overview from a thin-film perspective

    NASA Astrophysics Data System (ADS)

    Eklund, Per; Rosen, Johanna; Persson, Per O. Å.

    2017-03-01

    Inherently and artificially layered materials are commonly investigated both for fundamental scientific purposes and for technological application. When a layered material is thinned or delaminated to its physical limits, a two-dimensional (2D) material is formed and exhibits novel properties compared to its bulk parent phase. The complex layered phases known as ‘MAX phases’ (where M  =  early transition metal, A  =  A-group element, e.g. Al or Si, and X  =  C or N) are an exciting model system for materials design and the understanding of process-structure-property relationships. When the A layers are selectively etched from the MAX phases, a new type of 2D material is formed, named MXene to emphasize the relation to the MAX phases and the parallel with graphene. Since their discovery in 2011, MXenes have rapidly become established as a novel class of 2D materials with remarkable possibilities for composition variations and property tuning. This article gives a brief overview of MAX phases and MXene from a thin-film perspective, reviewing theory, characterization by electron microscopy, properties and how these are affected by the change in dimensionality, and outstanding challenges.

  13. Axial-bundle phases--new modes of 2D, 3D, and helical columnar self-assembly in liquid crystalline phases of bolaamphiphiles with swallow tail lateral chains.

    PubMed

    Prehm, Marko; Liu, Feng; Zeng, Xiangbing; Ungar, Goran; Tschierske, Carsten

    2011-04-06

    Two series of polyphilic molecules composed of a rigid and linear p-terphenyl core, terminated at both ends with polar glycerol groups capable of hydrogen bonding, and two branched swallow tail-type lateral chains, composed of a fluorinated and a nonfluorinated branch or two fluorinated branches, were synthesized and investigated by differential scanning calorimetry, polarizing microscopy, and X-ray diffraction (XRD) with respect to their self-assembly in thermotropic liquid crystalline (LC) phases. Hexagonal columnar phases were formed by all molecules, at least at the highest temperature. In these phases the columns are composed of a core of aromatic rods and an aliphatic shell. The aromatic rods form bundles which are rotationally averaged and lie parallel to the column long axis. This unique organization is proven by different optical and XRD methods. The aromatic and glycerol groups inside the rod bundles are segregated into alternating segments. Depending on temperature and molecular structure, long-range intercolumnar correlation of this periodicity could take place, leading to a 3D-ordered LC phase with rhombohedral R ̄3m symmetry. The bundles are embedded in the matrix of the lateral chains, which is divided into fluoroalkyl- and aliphatic-rich regions. In the 2D columnar phase the fluorinated regions take the form of either straight columns running along the edges of the hexagonal Voronoi cells or, for compounds with a higher degree of fluorination, fuse to a hexagonal honeycomb enclosing the aromatic cores. In the R ̄3m phase the fluorine-rich chains are preferentially found along right- and left-handed helices wound around the 3(1) screw axes between the main aromatic columns.

  14. Label-free optical detection of C-reactive protein by nanoimprint lithography-based 2D-photonic crystal film.

    PubMed

    Endo, Tatsuro; Kajita, Hiroshi; Kawaguchi, Yukio; Kosaka, Terumasa; Himi, Toshiyuki

    2016-06-01

    The development of high-sensitive, and cost-effective novel biosensors have been strongly desired for future medical diagnostics. To develop novel biosensor, the authors focused on the specific optical characteristics of photonic crystal. In this study, a label-free optical biosensor, polymer-based two-dimensional photonic crystal (2D-PhC) film fabricated using nanoimprint lithography (NIL), was developed for detection of C-reactive protein (CRP) in human serum. The nano-hole array constructed NIL-based 2D-PhC (hole diameter: 230 nm, distance: 230, depth: 200 nm) was fabricated on a cyclo-olefin polymer (COP) film (100 µm) using thermal NIL and required surface modifications to reduce nonspecific adsorption of target proteins. Antigen-antibody reactions on the NIL-based 2D-PhC caused changes to the surrounding refractive index, which was monitored as reflection spectrum changes in the visible region. By using surface modified 2D-PhC, the calculated detection limit for CRP was 12.24 pg/mL at an extremely short reaction time (5 min) without the need for additional labeling procedures and secondary antibody. Furthermore, using the dual-functional random copolymer, CRP could be detected in a pooled blood serum diluted 100× with dramatic reduction of nonspecific adsorption. From these results, the NIL-based 2D-PhC film has great potential for development of an on-site, high-sensitivity, cost-effective, label-free biosensor for medical diagnostics applications.

  15. Method and apparatus for optical phase error correction

    DOEpatents

    DeRose, Christopher; Bender, Daniel A.

    2014-09-02

    The phase value of a phase-sensitive optical device, which includes an optical transport region, is modified by laser processing. At least a portion of the optical transport region is exposed to a laser beam such that the phase value is changed from a first phase value to a second phase value, where the second phase value is different from the first phase value. The portion of the optical transport region that is exposed to the laser beam can be a surface of the optical transport region or a portion of the volume of the optical transport region. In an embodiment of the invention, the phase value of the optical device is corrected by laser processing. At least a portion of the optical transport region is exposed to a laser beam until the phase value of the optical device is within a specified tolerance of a target phase value.

  16. 2D and 3D optical diagnostic techniques applied to Madonna dei Fusi by Leonardo da Vinci

    NASA Astrophysics Data System (ADS)

    Fontana, R.; Gambino, M. C.; Greco, M.; Marras, L.; Materazzi, M.; Pampaloni, E.; Pelagotti, A.; Pezzati, L.; Poggi, P.; Sanapo, C.

    2005-06-01

    3D measurement and modelling have been traditionally applied to statues, buildings, archeological sites or similar large structures, but rarely to paintings. Recently, however, 3D measurements have been performed successfully also on easel paintings, allowing to detect and document the painting's surface. We used 3D models to integrate the results of various 2D imaging techniques on a common reference frame. These applications show how the 3D shape information, complemented with 2D colour maps as well as with other types of sensory data, provide the most interesting information. The 3D data acquisition was carried out by means of two devices: a high-resolution laser micro-profilometer, composed of a commercial distance meter mounted on a scanning device, and a laser-line scanner. The 2D data acquisitions were carried out using a scanning device for simultaneous RGB colour imaging and IR reflectography, and a UV fluorescence multispectral image acquisition system. We present here the results of the techniques described, applied to the analysis of an important painting of the Italian Reinassance: `Madonna dei Fusi', attributed to Leonardo da Vinci.

  17. An Optical Phased Array for LIDAR

    NASA Astrophysics Data System (ADS)

    Wang, Y.; Wu, M. C.

    2016-11-01

    We have previously demonstrated the development of an Optical Phased Array (OPA) micromechanical system (MEMS) used for beam steering, which shows great advantages over previous mechanisms such as opto-mechanical, acousto-optical (AO) or electro-optical (EO). We aim to integrate the OPA MEMS system into the application of automobile navigation, which is currently primarily dominated by opto-mechanical scanning based systems. Opto-mechanical scanning devices are usually bulky and relatively slow, while competing technologies (AO, EO) utilize devices that while small in size, cannot provide the steering speeds and versatility necessary for many applications. In drawing from phased array concepts that revolutionized RADAR technology by providing a compact, agile alternative to mechanically steered technology, the OPA based LIDAR program seeks to integrate thousands of closely packed optical emitting facets, precise relative electronic phase control of these facets, and all within a very small form factor. Comparing with other competing LIDAR system, the OPA based LIDAR system will have multiple degrees of freedom for phase control which enables not only agile beam steering but also beam forming and multiple beam generation, greatly expanding the diversity of applications.

  18. Accurate Measurements of Multiple-Bond 13C- 1H Coupling Constants from Phase-Sensitive 2D INEPT Spectra

    NASA Astrophysics Data System (ADS)

    Ding, Keyang

    1999-10-01

    Measurements of multiple-bond 13C-1H coupling constants are of great interest for the assignment of nonprotonated 13C resonances and the elucidation of molecular conformation in solution. Usually, the heteronuclear multiple-bond coupling constants were measured either by the JCH splittings mostly in selective 2D spectra or in 3D spectra, which are time consuming, or by the cross peak intensity analysis in 2D quantitative heteronuclear J correlation spectra (1994, G. Zhu, A. Renwick, and A. Bax, J. Magn. Reson. A 110, 257; 1994, A. Bax, G. W. Vuister, S. Grzesiek, F. Delaglio, A. C. Wang, R. Tschudin, and G. Zhu, Methods Enzymol. 239, 79.), which suffer from the accuracy problem caused by the signal-to-noise ratio and the nonpure absorptive peak patterns. Concerted incrementation of the duration for developing proton antiphase magnetization with respect to carbon-13 and the evolution time for proton chemical shift in different steps in a modified INEPT pulse sequence provides a new method for accurate measurements of heteronuclear multiple-bond coupling constants in a single 2D experiment.

  19. Phase Contrast Wavefront Sensing for Adaptive Optics

    NASA Technical Reports Server (NTRS)

    Bloemhof, E. E.; Wallace, J. K.; Bloemhof, E. E.

    2004-01-01

    Most ground-based adaptive optics systems use one of a small number of wavefront sensor technologies, notably (for relatively high-order systems) the Shack-Hartmann sensor, which provides local measurements of the phase slope (first-derivative) at a number of regularly-spaced points across the telescope pupil. The curvature sensor, with response proportional to the second derivative of the phase, is also sometimes used, but has undesirable noise propagation properties during wavefront reconstruction as the number of actuators becomes large. It is interesting to consider the use for astronomical adaptive optics of the "phase contrast" technique, originally developed for microscopy by Zemike to allow convenient viewing of phase objects. In this technique, the wavefront sensor provides a direct measurement of the local value of phase in each sub-aperture of the pupil. This approach has some obvious disadvantages compared to Shack-Hartmann wavefront sensing, but has some less obvious but substantial advantages as well. Here we evaluate the relative merits in a practical ground-based adaptive optics system.

  20. On-chip silicon optical phased array for two-dimensional beam steering.

    PubMed

    Kwong, David; Hosseini, Amir; Covey, John; Zhang, Yang; Xu, Xiaochuan; Subbaraman, Harish; Chen, Ray T

    2014-02-15

    A 16-element optical phased array integrated on chip is presented for achieving two-dimensional (2D) optical beam steering. The device is fabricated on the silicon-on-insulator platform with a 250 nm silicon device layer. Steering is achieved via a combination of wavelength tuning and thermo-optic phase shifting with a switching power of P(π)=20  mW per channel. Using a silicon waveguide grating with a polycrystalline silicon overlay enables narrow far field beam widths while mitigating the precise etching needed for conventional shallow etch gratings. Using this system, 2D steering across a 20°×15° field of view is achieved with a sidelobe level better than 10 dB and with beam widths of 1.2°×0.5°.

  1. Demonstration of 400 Gb/s optical PDM-OFDM superchannel unrepeatered transmission by all optical phase-conjugated copy

    NASA Astrophysics Data System (ADS)

    Chen, Yuanxiang; Li, Juhao; Zhu, Paikun; Wu, Zhongying; Chen, Jingbiao; He, Yongqi; Chen, Zhangyuan

    2016-12-01

    Unrepeatered transmission delivers data over a few hundred kilometers without in-line active elements and it can effectively reduce the line complexity and the overall system cost. In this paper, we propose all optical phase-conjugated copy (OPC) to improve optical signal noise ratio (OSNR) margin and nonlinear tolerance for unrepeatered transmission of polarization division multiplexing (PDM) optical superchannel with EDFA only amplification. Orthogonal pumps FWM scheme is utilized to generate the optical phase-conjugated copy. The original superchannel and the phase-conjugated copy are simultaneously transmitted and received. The phases of the copy symbols are conjugated and summed with the original superchannel symbols to suppress both linear noise and nonlinear phase noise at the receiver. The proposed OPC scheme is simple and effective in phase-conjugated copy generation and digital signal processing (DSP). What is more, it is transparent to signal bit rate and modulation format, which applies to optical superchannel transmission. We experimentally verify the proposed scheme on a 400 Gb/s optical polarization division multiplexing orthogonal frequency division multiplexing (PDM-OFDM) superchannel. A Q-factor improvement of 2.1 dB is achieved after 180 km SSMF unrepeatered transmission. The optimum launch power in OPC scheme increases from -3 dBm to -2 dBm. To verify the maximum reach, we extend fiber length and realize 240 km SSMF unrepeatered transmission.

  2. Electro-optic resonant phase modulator

    NASA Technical Reports Server (NTRS)

    Chen, Chien-Chung (Inventor); Hemmati, Hamid (Inventor); Robinson, Deborah L. (Inventor)

    1992-01-01

    An electro-optic resonant cavity is used to achieve phase modulation with lower driving voltages. Laser damage thresholds are inherently higher than with previously used integrated optics due to the utilization of bulk optics. Phase modulation is achieved at higher speeds with lower driving voltages than previously obtained with non-resonant electro-optic phase modulators. The instant scheme uses a data locking dither approach as opposed to the conventional sinusoidal locking schemes. In accordance with a disclosed embodiment, a resonant cavity modulator has been designed to operate at a data rate in excess of 100 megabits per sec. By carefully choosing the cavity finesse and its dimension, it is possible to control the pulse switching time to within 4 nano-sec. and to limit the required switching voltage to within 10 V. This cavity locking scheme can be applied by using only the random data sequence, and without the need of dithering of the cavity. Compared to waveguide modulators, the resonant cavity has a comparable modulating voltage requirement. Because of its bulk geometry, the resonant cavity modulator has the potential of accommodating higher throughput power. Mode matching into the bulk device is easier and typically can be achieved with higher efficiency. An additional control loop is incorporated into the modulator to maintain the cavity on resonance.

  3. Optical signal processing of phased array radar

    NASA Astrophysics Data System (ADS)

    Weverka, Robert T.

    This thesis develops optical processors that scale to very high processing speed. Optical signal processing is often promoted on the basis of smaller size, lower weight and lower power consumption as well as higher signal processing speed. While each of these requirements has applications, it is the ones that require processing speed beyond that available in electronics that are most compelling. Thirty years ago, optical processing was the only method fast enough to process Synthetic Aperture Radar (SAR), one of the more demanding signal processing tasks at this time. Since that time electronic processing speed has improved sufficiently to tackle that problem. We have sought out the problems that require significantly higher processing speed and developed optical processors that tackle these more difficult problems. The components that contribute to high signal processing speed are high input signal bandwidth, a large number of parallel input channels each with this high bandwidth, and a large number of parallel operations required on each input channel. Adaptive signal processing for phased array radar has all of these factors. The processors developed for this task scale well in three dimensions, which allows them to maximize parallelism for high speed. This thesis explores an example of a negative feedback adaptive phased array processor and an example of a positive feedback phased array processor. The negative feedback processor uses and array of inputs in up to two dimensions together with the time history of the signal in the third dimension to adapt the array pattern to null out incoming jammer signals. The positive feedback processor uses the incoming signals and assumptions about the radar scene to correct for position errors in a phased array. Discovery and analysis of these new processors are facilitated by an original volume holographic analysis technique developed in the thesis. The thesis includes a new acoustooptic Bragg cell geometry developed with

  4. Speckle interferometry using fiber optic phase stepping

    NASA Technical Reports Server (NTRS)

    Mercer, Carolyn R.; Beheim, Glenn

    1989-01-01

    A system employing closed-loop phase-stepping is used to measure the out-of-plane deformation of a diffusely reflecting object. Optical fibers are used to provide reference and object beam illumination for a standard two-beam speckle interferometer, providing set-up flexibility and ease of alignment. Piezoelectric fiber-stretchers and a phase-measurement/servo system are used to provide highly accurate phase steps. Intensity data is captured with a charge-injection-device camera, and is converted into a phase map using a desktop computer. The closed-loop phase-stepping system provides 90 deg phase steps which are accurate to 0.02 deg, greatly improving this system relative to open-loop interferometers. The system is demonstrated on a speckle interferometer, measuring the rigid-body translation of a diffusely reflecting object with an accuracy + or - 10 deg, or roughly + or - 15 nanometers. This accuracy is achieved without the use of a pneumatically mounted optics table.

  5. Speckle Interferometry Using Fiber Optic Phase Stepping

    NASA Astrophysics Data System (ADS)

    Mercer, Carolyn R.; Beheim, Glenn

    1990-04-01

    A system employing closed-loop phase-stepping is used to measure the out-of-plane deformation of a diffusely reflecting object. Optical fibers are used to provide reference and object beam illumination for a standard two-beam speckle interferom-eter, providing set-up flexibility and ease of alignment. Piezoelectric fiber-stretchers and a phase-measurement/servo system are used to provide highly accurate phase steps. Intensity data is captured with a charge-injection-device camera, and is converted into a phase map using a desktop computer. The closed-loop phase-stepping system provides 90° phase steps which are accurate to 0.02°, greatly improving this system relative to open-loop interferometers. The sys-tem is demonstrated on a speckle interferometer, measuring the rigid-body translation of a diffusely reflecting object with an accuracy of -±100, or roughly ±15 nm. This accuracy is achieved without the use of a pneumatically mounted optics table.

  6. Communication: two-dimensional gas-phase coherent anti-Stokes Raman spectroscopy (2D-CARS): simultaneous planar imaging and multiplex spectroscopy in a single laser shot.

    PubMed

    Bohlin, Alexis; Kliewer, Christopher J

    2013-06-14

    Coherent anti-Stokes Raman spectroscopy (CARS) has been widely used as a powerful tool for chemical sensing, molecular dynamics measurements, and rovibrational spectroscopy since its development over 30 years ago, finding use in fields of study as diverse as combustion diagnostics, cell biology, plasma physics, and the standoff detection of explosives. The capability for acquiring resolved CARS spectra in multiple spatial dimensions within a single laser shot has been a long-standing goal for the study of dynamical processes, but has proven elusive because of both phase-matching and detection considerations. Here, by combining new phase matching and detection schemes with the high efficiency of femtosecond excitation of Raman coherences, we introduce a technique for single-shot two-dimensional (2D) spatial measurements of gas phase CARS spectra. We demonstrate a spectrometer enabling both 2D plane imaging and spectroscopy simultaneously, and present the instantaneous measurement of 15,000 spatially correlated rotational CARS spectra in N2 and air over a 2D field of 40 mm(2).

  7. Communication: Two-dimensional gas-phase coherent anti-Stokes Raman spectroscopy (2D-CARS): Simultaneous planar imaging and multiplex spectroscopy in a single laser shot

    NASA Astrophysics Data System (ADS)

    Bohlin, Alexis; Kliewer, Christopher J.

    2013-06-01

    Coherent anti-Stokes Raman spectroscopy (CARS) has been widely used as a powerful tool for chemical sensing, molecular dynamics measurements, and rovibrational spectroscopy since its development over 30 years ago, finding use in fields of study as diverse as combustion diagnostics, cell biology, plasma physics, and the standoff detection of explosives. The capability for acquiring resolved CARS spectra in multiple spatial dimensions within a single laser shot has been a long-standing goal for the study of dynamical processes, but has proven elusive because of both phase-matching and detection considerations. Here, by combining new phase matching and detection schemes with the high efficiency of femtosecond excitation of Raman coherences, we introduce a technique for single-shot two-dimensional (2D) spatial measurements of gas phase CARS spectra. We demonstrate a spectrometer enabling both 2D plane imaging and spectroscopy simultaneously, and present the instantaneous measurement of 15 000 spatially correlated rotational CARS spectra in N2 and air over a 2D field of 40 mm2.

  8. Communication: Two-dimensional gas-phase coherent anti-Stokes Raman spectroscopy (2D-CARS): Simultaneous planar imaging and multiplex spectroscopy in a single laser shot

    SciTech Connect

    Bohlin, Alexis; Kliewer, Christopher J.

    2013-01-01

    Coherent anti-Stokes Raman spectroscopy (CARS) has been widely used as a powerful tool for chemical sensing, molecular dynamics measurements, and rovibrational spectroscopy since its development over 30 years ago, finding use in fields of study as diverse as combustion diagnostics, cell biology, plasma physics, and the standoff detection of explosives. The capability for acquiring resolved CARS spectra in multiple spatial dimensions within a single laser shot has been a long-standing goal for the study of dynamical processes, but has proven elusive because of both phase-matching and detection considerations. Here, by combining new phase matching and detection schemes with the high efficiency of femtosecond excitation of Raman coherences, we introduce a technique for single-shot two-dimensional (2D) spatial measurements of gas phase CARS spectra. We demonstrate a spectrometer enabling both 2D plane imaging and spectroscopy simultaneously, and present the instantaneous measurement of 15, 000 spatially correlated rotational CARS spectra in N2 and air over a 2D field of 40 mm2.

  9. Optical Phase-Locked Loop For Optical Communication

    NASA Technical Reports Server (NTRS)

    Win, Moe Z.; Chen, Chien C.; Lesh, James R.; Marshall, William K.; Rayman, Marc D.; Scholtz, Robert A.

    1992-01-01

    Experimental apparatus includes two diode-pumped solid-state lasers of non-planar-ring-oscillator type, one represents the transmitting oscillator, other local oscillator in receiver. Output of transmitting oscillator is amplitude-modulated with pulse-position-modulated data stream. Phase-error variance of less than 0.05 mrad(Sup 2) achieved with relatively-narrow-band loop. Applications include free-space and fiber-optic communications, navigation, and scientific instrumentation in which receivers are required to track phases of transmitted signals.

  10. Exploring the promising properties of 2D exfoliated black phosphorus for optoelectronic applications under 1.55 μm optical excitation

    NASA Astrophysics Data System (ADS)

    Penillard, A.; Tripon-Canseliet, C.; Maksimovic, I.; Rosticher, M.; Servet, B.; Liu, Z.; Géron, E.

    2016-04-01

    A great interest has been lately initiated in the optoelectronics field for 2D materials with a tunable bandgap. Being able to choose the bandgap of a material is a huge progress in optoelectronics, since it would permit to overcome the limitation imposed by the graphene lack of energy bandgap, but also the restriction imposed by already used semiconductor whose bandgap are fixed and cannot apply for IR-NIR applications. From DFT simulations predictions, Black Phosphorus (bP) becomes a bidimensional semiconducting material with a direct tunable energy bandgap from 0.3 eV to 2 eV by controlling number of layers. This material also has a picosecond carrier response and exceptional mobilities under external excitation. Hence black phosphorus is a promising 2D material candidate for photoconductive switching under a NIR optical excitation as in telecommunication wavelength range of 1.55 μm. In this paper, material electromagnetic properties analysis is described in a large frequency band from optical to microwave measurements executed on different samples allowing energy bandgap and work function dependency to fabrication techniques, anisotropy and multiscale optoelectronic device realization by switch contact engineering and material passivation or encapsulation. Material implementation in microwave devices opens the route to new broadband electronic functionalities triggered by optics, thanks to light/matter extreme confinement degree. In this paper we present fabrication method of bP based microwave photoconductive switch, with a focus on black phosphorus Raman characterization, and obtained performances.

  11. Structural, electronic transport and optical properties of functionalized quasi-2D TiC2 from first-principles calculations

    NASA Astrophysics Data System (ADS)

    Berdiyorov, G. R.; Madjet, M. E.

    2016-12-01

    Using the first-principles density functional theory, we study the effect of surface functionalization on the structural and optoelectronic properties of recently proposed quasi-two-dimensional material TiC2 [T. Zhao, S. Zhang, Y. Guo, Q. Wang, Nanoscale 8 (2016) 233]. Hydrogenated, fluorinated, oxidized and hydroxylated surfaces are considered. Significant changes in the lattice parameters and partial charge distributions are found due to the surface termination. Direct contribution of the adatoms to the system density of states near the Fermi level is obtained, which has a major impact on the optoelectronic properties of the material. For example, surface termination results in larger absorption in the visible range of the spectrum. The electronic transport is also affected by the surface functionalization: the current in the system can be reduced by an order of magnitude. These findings indicate the importance of the effects of surface passivation on optoelectronic properties of this quasi-2D material.

  12. Random-phase metasurfaces at optical wavelengths

    PubMed Central

    Pors, Anders; Ding, Fei; Chen, Yiting; Radko, Ilya P.; Bozhevolnyi, Sergey I.

    2016-01-01

    Random-phase metasurfaces, in which the constituents scatter light with random phases, have the property that an incident plane wave will diffusely scatter, hereby leading to a complex far-field response that is most suitably described by statistical means. In this work, we present and exemplify the statistical description of the far-field response, particularly highlighting how the response for polarised and unpolarised light might be alike or different depending on the correlation of scattering phases for two orthogonal polarisations. By utilizing gap plasmon-based metasurfaces, consisting of an optically thick gold film overlaid by a subwavelength thin glass spacer and an array of gold nanobricks, we design and realize random-phase metasurfaces at a wavelength of 800 nm. Optical characterisation of the fabricated samples convincingly demonstrates the diffuse scattering of reflected light, with statistics obeying the theoretical predictions. We foresee the use of random-phase metasurfaces for camouflage applications and as high-quality reference structures in dark-field microscopy, while the control of the statistics for polarised and unpolarised light might find usage in security applications. Finally, by incorporating a certain correlation between scattering by neighbouring metasurface constituents new types of functionalities can be realised, such as a Lambertian reflector. PMID:27328635

  13. Random-phase metasurfaces at optical wavelengths

    NASA Astrophysics Data System (ADS)

    Pors, Anders; Ding, Fei; Chen, Yiting; Radko, Ilya P.; Bozhevolnyi, Sergey I.

    2016-06-01

    Random-phase metasurfaces, in which the constituents scatter light with random phases, have the property that an incident plane wave will diffusely scatter, hereby leading to a complex far-field response that is most suitably described by statistical means. In this work, we present and exemplify the statistical description of the far-field response, particularly highlighting how the response for polarised and unpolarised light might be alike or different depending on the correlation of scattering phases for two orthogonal polarisations. By utilizing gap plasmon-based metasurfaces, consisting of an optically thick gold film overlaid by a subwavelength thin glass spacer and an array of gold nanobricks, we design and realize random-phase metasurfaces at a wavelength of 800 nm. Optical characterisation of the fabricated samples convincingly demonstrates the diffuse scattering of reflected light, with statistics obeying the theoretical predictions. We foresee the use of random-phase metasurfaces for camouflage applications and as high-quality reference structures in dark-field microscopy, while the control of the statistics for polarised and unpolarised light might find usage in security applications. Finally, by incorporating a certain correlation between scattering by neighbouring metasurface constituents new types of functionalities can be realised, such as a Lambertian reflector.

  14. Optical isolator using two tandem phase modulators.

    PubMed

    Doerr, Christopher R; Dupuis, Nicolas; Zhang, Liming

    2011-11-01

    We propose and demonstrate an integrated optical isolator in InP using two phase modulators in series. The phase modulators are driven with a single-frequency signal in quadrature. Theoretically there is no effect on the forward signal, and the carrier of the backward signal can be eliminated, the energy distributed to other frequencies. We achieve a carrier isolation of 11 dB and an excess insertion loss of 2.3 dB. Such an isolator can be monolithically integrated with a laser without extra materials or magnetic fields.

  15. Active control of microbubbles stream in multi-bifurcated flow by using 2D phased array ultrasound transducer.

    PubMed

    Koda, Ren; Koido, Jun; Hosaka, Naoto; Ito, Takumi; Onogi, Shinya; Mochizuki, Takashi; Masuda, Kohji; Ikeda, Seiichi; Arai, Fumihito

    2013-01-01

    We have previously reported our attempt to propel microbbles in flow by a primary Bjerknes force, which is a physical phenomenon where an acoustic wave pushes an obstacle along its direction of propagation. However, when ultrasound was emitted from surface of the body, controlling bubbles in against flow was needed. It is unpractical to use multiple transducers to produce the same number of focal points because single element transducer cannot produce more than two focal points. In this study, we introduced a complex artificial blood vessel according to a capillary model and a 2D array transducer to produce multiple focal points for active control of microbubbles in against flow. Furthermore, we investigated bubble control in viscous fluid. As the results, we confirmed clearly path selection of MBs in viscous fluid as well as in water.

  16. 2D microwave imaging reflectometer electronics

    SciTech Connect

    Spear, A. G.; Domier, C. W. Hu, X.; Muscatello, C. M.; Ren, X.; Luhmann, N. C.; Tobias, B. J.

    2014-11-15

    A 2D microwave imaging reflectometer system has been developed to visualize electron density fluctuations on the DIII-D tokamak. Simultaneously illuminated at four probe frequencies, large aperture optics image reflections from four density-dependent cutoff surfaces in the plasma over an extended region of the DIII-D plasma. Localized density fluctuations in the vicinity of the plasma cutoff surfaces modulate the plasma reflections, yielding a 2D image of electron density fluctuations. Details are presented of the receiver down conversion electronics that generate the in-phase (I) and quadrature (Q) reflectometer signals from which 2D density fluctuation data are obtained. Also presented are details on the control system and backplane used to manage the electronics as well as an introduction to the computer based control program.

  17. 2D microwave imaging reflectometer electronics.

    PubMed

    Spear, A G; Domier, C W; Hu, X; Muscatello, C M; Ren, X; Tobias, B J; Luhmann, N C

    2014-11-01

    A 2D microwave imaging reflectometer system has been developed to visualize electron density fluctuations on the DIII-D tokamak. Simultaneously illuminated at four probe frequencies, large aperture optics image reflections from four density-dependent cutoff surfaces in the plasma over an extended region of the DIII-D plasma. Localized density fluctuations in the vicinity of the plasma cutoff surfaces modulate the plasma reflections, yielding a 2D image of electron density fluctuations. Details are presented of the receiver down conversion electronics that generate the in-phase (I) and quadrature (Q) reflectometer signals from which 2D density fluctuation data are obtained. Also presented are details on the control system and backplane used to manage the electronics as well as an introduction to the computer based control program.

  18. Towards an Integrated Optic Phase-Locked Oscillator

    DTIC Science & Technology

    2008-12-01

    photodetection process. In a recent demonstration [8], a timing stability of 6.8 fs over 10 hours was demonstrated, corresponding to a stability of 1.9×10-19...optic phase-locked oscillator (IO-PLO). While much work remains, a design for an integrated optic balanced optical-microwave phase detector (IO...readily implemented device is an integrated optic balanced optical-microwave phase detector (IO-BOMPD), which is highly useful for distributed timing

  19. High-speed full range complex Fourier-domain optical coherence tomography using sinusoidal phase-modulating interferometry

    NASA Astrophysics Data System (ADS)

    Bu, Peng; Wang, Xiangzhao; Sasaki, Osami; Wei, Xunbin

    2007-11-01

    High-speed full-range complex Fourier domain optical coherence tomography (FDOCT) using sinusoidal phase-modulating interferometry is proposed. A high-rate two-dimensional (2-D) CCD camera is used to record time-sequential sinusoidally phase-modulated 2-D spectral interferograms, from which the complex 2-D spectral interferograms corresponding to each frame of the 2-D CCD camera are extracted by Fourier transform method. By taking inverse Fourier transform of the complex spectral interferograms, full-range B-scan images free of the complex conjugate ambiguity as well as dc and autocorrelation noises are obtained at intervals of the frame period of the 2-D CCD camera. Time-sequential cross-sectional imaging of human skin ex vivo with the proposed method is demonstrated.

  20. Boresight calibration of construction misalignments for 3D scanners built with a 2D laser range finder rotating on its optical center.

    PubMed

    Morales, Jesús; Martínez, Jorge L; Mandow, Anthony; Reina, Antonio J; Pequeño-Boter, Alejandro; García-Cerezo, Alfonso

    2014-10-24

    Many applications, like mobile robotics, can profit from acquiring dense, wide-ranging and accurate 3D laser data. Off-the-shelf 2D scanners are commonly customized with an extra rotation as a low-cost, lightweight and low-power-demanding solution. Moreover, aligning the extra rotation axis with the optical center allows the 3D device to maintain the same minimum range as the 2D scanner and avoids offsets in computing Cartesian coordinates. The paper proposes a practical procedure to estimate construction misalignments based on a single scan taken from an arbitrary position in an unprepared environment that contains planar surfaces of unknown dimensions. Inherited measurement limitations from low-cost 2D devices prevent the estimation of very small translation misalignments, so the calibration problem reduces to obtaining boresight parameters. The distinctive approach with respect to previous plane-based intrinsic calibration techniques is the iterative maximization of both the flatness and the area of visible planes. Calibration results are presented for a case study. The method is currently being applied as the final stage in the production of a commercial 3D rangefinder.

  1. Boresight Calibration of Construction Misalignments for 3D Scanners Built with a 2D Laser Rangefinder Rotating on Its Optical Center

    PubMed Central

    Morales, Jesús; Martínez, Jorge L.; Mandow, Anthony; Reina, Antonio J.; Pequeño-Boter, Alejandro; García-Cerezo, Alfonso

    2014-01-01

    Many applications, like mobile robotics, can profit from acquiring dense, wide-ranging and accurate 3D laser data. Off-the-shelf 2D scanners are commonly customized with an extra rotation as a low-cost, lightweight and low-power-demanding solution. Moreover, aligning the extra rotation axis with the optical center allows the 3D device to maintain the same minimum range as the 2D scanner and avoids offsets in computing Cartesian coordinates. The paper proposes a practical procedure to estimate construction misalignments based on a single scan taken from an arbitrary position in an unprepared environment that contains planar surfaces of unknown dimensions. Inherited measurement limitations from low-cost 2D devices prevent the estimation of very small translation misalignments, so the calibration problem reduces to obtaining boresight parameters. The distinctive approach with respect to previous plane-based intrinsic calibration techniques is the iterative maximization of both the flatness and the area of visible planes. Calibration results are presented for a case study. The method is currently being applied as the final stage in the production of a commercial 3D rangefinder. PMID:25347585

  2. Validity of computational hemodynamics in human arteries based on 3D time-of-flight MR angiography and 2D electrocardiogram gated phase contrast images

    NASA Astrophysics Data System (ADS)

    Yu, Huidan (Whitney); Chen, Xi; Chen, Rou; Wang, Zhiqiang; Lin, Chen; Kralik, Stephen; Zhao, Ye

    2015-11-01

    In this work, we demonstrate the validity of 4-D patient-specific computational hemodynamics (PSCH) based on 3-D time-of-flight (TOF) MR angiography (MRA) and 2-D electrocardiogram (ECG) gated phase contrast (PC) images. The mesoscale lattice Boltzmann method (LBM) is employed to segment morphological arterial geometry from TOF MRA, to extract velocity profiles from ECG PC images, and to simulate fluid dynamics on a unified GPU accelerated computational platform. Two healthy volunteers are recruited to participate in the study. For each volunteer, a 3-D high resolution TOF MRA image and 10 2-D ECG gated PC images are acquired to provide the morphological geometry and the time-varying flow velocity profiles for necessary inputs of the PSCH. Validation results will be presented through comparisons of LBM vs. 4D Flow Software for flow rates and LBM simulation vs. MRA measurement for blood flow velocity maps. Indiana University Health (IUH) Values Fund.

  3. Electric-optic resonant phase modulator

    NASA Technical Reports Server (NTRS)

    Chen, Chien-Chung (Inventor); Robinson, Deborah L. (Inventor); Hemmati, Hamid (Inventor)

    1994-01-01

    An electro-optic resonant cavity is used to achieve phase modulation with lower driving voltages. Laser damage thresholds are inherently higher than with previously used integrated optics due to the utilization of bulk optics. Phase modulation is achieved at higher speeds with lower driving voltages than previously obtained with non-resonant electro-optic phase modulators. The instant scheme uses a data locking dither approach as opposed to the conventional sinusoidal locking schemes. In accordance with a disclosed embodiment, a resonant cavity modulator has been designed to operate at a data rate in excess of 100 Mbps. By carefully choosing the cavity finesse and its dimension, it is possible to control the pulse switching time to within 4 ns and to limit the required switching voltage to within 10 V. Experimentally, the resonant cavity can be maintained on resonance with respect to the input laser signal by monitoring the fluctuation of output intensity as the cavity is switched. This cavity locking scheme can be applied by using only the random data sequence, and without the need of additional dithering of the cavity. Compared to waveguide modulators, the resonant cavity has a comparable modulating voltage requirement. Because of its bulk geometry, resonant cavity modulator has the potential of accommodating higher throughput power. Furthermore, mode matching into a bulk device is easier and typically can be achieved with higher efficiency. On the other hand, unlike waveguide modulators which are essentially traveling wave devices, the resonant cavity modulator requires that the cavity be maintained in resonance with respect to the incoming laser signal. An additional control loop is incorporated into the modulator to maintain the cavity on resonance.

  4. Partially dark optical molecule via phase control

    NASA Astrophysics Data System (ADS)

    Wang, Z. H.; Xu, Xun-Wei; Li, Yong

    2017-01-01

    We study the tunable photonic distribution in an optical molecule consisting of two linearly coupled single-mode cavities. With the intercavity coupling and two driving fields, the energy levels of the optical-molecule system form a closed cyclic energy-level diagram, and the phase difference between the driving fields serves as a sensitive controller on the dynamics of the system. Due to the quantum interference effect, we can realize a partially dark optical molecule, where the steady-state mean photon number in one of the cavities achieves zero even under the external driving. And the dark cavity can be changed from one of the cavities to the other by only adjusting the phase difference. We also show that our proposal is robust to the noise at zero temperature. Furthermore, we show that when one of the cavities couples with an atomic ensemble, it will be dark under the same condition as that in the case without atoms, but the condition for the other cavity to be dark is modified.

  5. Electro-optic Phase Grating Streak Spectrometer

    SciTech Connect

    Goldin, F. J.

    2012-08-02

    The electro-optic phase grating streak spectrometer (EOPGSS) generates a time-resolved spectra equivalent to that obtained with a conventional spectrometer/streak camera combination, but without using a streak camera (by far the more expensive and problematic component of the conventional system). The EOPGSS is based on a phase, rather than an amplitude grating. Further, this grating is fabricated of electro-optic material such as, for example, KD*P, by either etching grooves into an E-O slab, or by depositing lines of the E-O material onto an optical flat. An electric field normal to the grating alters the material’s index of refraction and thus affects a shift (in angle) of the output spectrum. Ramping the voltage streaks the spectrum correspondingly. The streak and dispersion directions are the same, so a second (static, conventional) grating disperses the spectrum in the orthogonal direction to prevent different wavelengths from “overwriting” each other. Because the streaking is done by the grating, the streaked output spectrum is recorded with a time-integrating device, such as a CCD. System model, typical design, and performance expectations will be presented.

  6. Optical properties monitor: Experiment definition phase

    NASA Technical Reports Server (NTRS)

    Wilkes, Donald R.; Bennett, Jean M.; Hummer, Leigh L.; Chipman, Russell A.; Hadaway, James B.; Pezzaniti, Larry

    1990-01-01

    The stability of materials used in the space environment will continue to be a limiting technology for space missions. The Optical Properties Monitor (OPM) Experiment provides a comprehensive space research program to study the effects of the space environment (both natural and induced) on optical, thermal and space power materials. The OPM Experiment was selected for definition under the NASA/OAST In-Space Technology Experiment Program. The results of the OPM Definition Phase are presented. The OPM experiment will expose selected materials to the space environment and measure the effects with in-space optical measurements. In-space measurements include total hemispherical reflectance total integrated scatter and VUV reflectance/transmittance. The in-space measurements will be augmented with extensive pre- and post-flight sample measurements to determine other optical, mechanical, electrical, chemical or surface effects of space exposure. Environmental monitors will provide the amount and time history of the sample exposure to solar irradiation, atomic oxygen and molecular contamination.

  7. Optical properties monitor: Experiment definition phase

    NASA Technical Reports Server (NTRS)

    Wilkes, Donald R.; Bennett, Jean M.; Hummer, Leigh L.; Chipman, Russell A.; Hadaway, James B.; Pezzaniti, Larry

    1989-01-01

    The stability of materials used in the space environment will continue to be a limiting technology for space missions. The Optical Properties Monitor (OPM) Experiment provides a comprehensive space research program to study the effects of the space environment-both natural and induced-on optical, thermal and space power materials. The OPM Experiment was selected for definition under the NASA/OAST In-Space Technology Experiment Program. The results of the OPM Definition Phase are presented. The OPM Experiment will expose selected materials to the space environment and measure the effects with in-space optical measurements. In-space measurements include total hemispherical reflectance total integrated scatter and VUV reflectance/transmittance. The in-space measurements will be augmented with extensive pre- and post-flight sample measurements to determine other optical, mechanical, electrical, chemical or surface effects of space exposure. Environmental monitors will provide the amount and time history of the sample exposure to solar irradiation, atomic oxygen and molecular contamination.

  8. Semi-automated 2D Bruch's membrane shape analysis in papilledema using spectral-domain optical coherence tomography

    NASA Astrophysics Data System (ADS)

    Wang, Jui-Kai; Sibony, Patrick A.; Kardon, Randy H.; Kupersmith, Mark J.; Garvin, Mona K.

    2015-03-01

    Recent studies have shown that the Bruch's membrane (BM) and retinal pigment epithelium (RPE), visualized on spectral-domain optical coherence tomography (SD-OCT), is deformed anteriorly towards the vitreous in patients with intracranial hypertension and papilledema. The BM/RPE shape has been quantified using a statistical-shape-model approach; however, to date, the approach has involved the tedious and time-consuming manual placement of landmarks and correspondingly, only the shape (and shape changes) of a limited number of patients has been studied. In this work, we first present a semi-automated approach for the extraction of 20 landmarks along the BM from an optic-nerve-head (ONH) centered OCT slice from each patient. In the approach, after the manual placement of the two Bruch's membrane opening (BMO) points, the remaining 18 landmarks are automatically determined using a graph-based segmentation approach. We apply the approach to the OCT scans of 116 patients (at baseline) enrolled in the Idiopathic Intracranial Hypertension Treatment Trial and generate a statistical shape model using principal components analysis. Using the resulting shape model, the coefficient (shape measure) corresponding to the second principal component (eigenvector) for each set of landmarks indicates the degree of the BM/RPE is oriented away from the vitreous. Using a subset of 20 patients, we compare the shape measure computed using this semi-automated approach with the resulting shape measure when (1) all landmarks are specified manually (Experiment I); and (2) a different expert specifies the two BMO points (Experiment II). In each case, a correlation coefficient >= 0.99 is obtained.

  9. Study on the Multi-phase Flow and Fluid Saturation in 2D Fractured Media by Light Transmission Technique

    NASA Astrophysics Data System (ADS)

    Zhang, Y.; Ye, S.; Wu, J.

    2013-12-01

    Immiscible two-phase flows in fractured media are encountered in many engineering processes such as recovery of oil and gas, exploitation of geothermal energy, and groundwater contamination by immiscible chemicals. A two-dimensional rough wall parallel plate fracture model was set up and light transmission method (LTM) was applied to study two-phase flow system in fractured media. The fracture model stood with up and bottom flow and no flow on other two sides. A charge-coupled device (CCD) camera was used to monitor the migration of DNAPL and gas bubbles in the fracture model. To simulate two-phase system in fracture media, air was injected into the water saturated cell (C1) through the middle of the bottom and NAPL was injected into another water saturated cell (C2) through the middle of the top of the cell. The results show LTM was an effective way in monitoring the migration of DNAPL and gas bubbles in the fracture models. Gas moved upwards quickly to the top of C1 in the way of air bubbles generated at the injection position and formed a continuous distribution. The migration of TCE was controlled by its own weight and fracture aperture. TCE migrated to large aperture firstly when moving downwards, and intruded into smaller one with accumulation of TCE. Light Intensity-Saturation Models (LISMs) were developed to estimate the gas or NAPL saturation in two-phase system. The volume amount of infiltration of gas bubbles or NAPL could be estimated from light intensities by LISMs. There were strong correlations between the added and calculated amounts of gas or TCE. It is feasible to use the light transmission method to characterize the movement and spatial distribution of gas or NAPL in fractured media.

  10. High-speed optical phase-shifting apparatus

    SciTech Connect

    Zortman, William A.

    2016-11-08

    An optical phase shifter includes an optical waveguide, a plurality of partial phase shifting elements arranged sequentially, and control circuitry electrically coupled to the partial phase shifting elements. The control circuitry is adapted to provide an activating signal to each of the N partial phase shifting elements such that the signal is delayed by a clock cycle between adjacent partial phase shifting elements in the sequence. The transit time for a guided optical pulse train between the input edges of consecutive partial phase shifting elements in the sequence is arranged to be equal to a clock cycle, thereby enabling pipelined processing of the optical pulses.

  11. Optical Phase Curves of Kepler Exoplanets

    NASA Astrophysics Data System (ADS)

    Esteves, Lisa J.; De Mooij, Ernst J. W.; Jayawardhana, Ray

    2013-07-01

    We conducted a comprehensive search for optical phase variations of all close-in (a/R sstarf < 10) planet candidates in 15 quarters of Kepler space telescope data. After correcting for systematics, we found eight systems that show secondary eclipses as well as phase variations. Of these, five (Kepler-5, Kepler-6, Kepler-8, KOI-64, and KOI-2133) are new and three (TrES-2, HAT-P-7, and KOI-13) have published phase curves, albeit with many fewer observations. We model the full phase curve of each planet candidate, including the primary and secondary transits, and derive their albedos, dayside and nightside temperatures, ellipsoidal variations, and Doppler beaming. We find that KOI-64 and KOI-2133 have nightside temperatures well above their equilibrium values (while KOI-2133 also has an albedo, >1), so we conclude that they are likely to be self-luminous objects rather than planets. The other six candidates have characteristics consistent with their being planets with low geometric albedos (<0.3). For TrES-2 and KOI-13, the Kepler bandpass appears to probe atmospheric layers hotter than the planet's equilibrium temperature. For KOI-13, we detect a never-before-seen third cosine harmonic with an amplitude of 6.7 ± 0.3 ppm and a phase shift of -1.1 ± 0.1 rad in the phase curve residual, possibly due to its spin-orbit misalignment. We report derived planetary parameters for all six planets, including masses from ellipsoidal variations and Doppler beaming, and compare our results to published values when available. Our results nearly double the number of Kepler exoplanets with measured phase curve variations, thus providing valuable constraints on the properties of hot Jupiters.

  12. OPTICAL PHASE CURVES OF KEPLER EXOPLANETS

    SciTech Connect

    Esteves, Lisa J.; De Mooij, Ernst J. W.; Jayawardhana, Ray E-mail: demooij@astro.utoronto.ca

    2013-07-20

    We conducted a comprehensive search for optical phase variations of all close-in (a/R{sub *} < 10) planet candidates in 15 quarters of Kepler space telescope data. After correcting for systematics, we found eight systems that show secondary eclipses as well as phase variations. Of these, five (Kepler-5, Kepler-6, Kepler-8, KOI-64, and KOI-2133) are new and three (TrES-2, HAT-P-7, and KOI-13) have published phase curves, albeit with many fewer observations. We model the full phase curve of each planet candidate, including the primary and secondary transits, and derive their albedos, dayside and nightside temperatures, ellipsoidal variations, and Doppler beaming. We find that KOI-64 and KOI-2133 have nightside temperatures well above their equilibrium values (while KOI-2133 also has an albedo, >1), so we conclude that they are likely to be self-luminous objects rather than planets. The other six candidates have characteristics consistent with their being planets with low geometric albedos (<0.3). For TrES-2 and KOI-13, the Kepler bandpass appears to probe atmospheric layers hotter than the planet's equilibrium temperature. For KOI-13, we detect a never-before-seen third cosine harmonic with an amplitude of 6.7 {+-} 0.3 ppm and a phase shift of -1.1 {+-} 0.1 rad in the phase curve residual, possibly due to its spin-orbit misalignment. We report derived planetary parameters for all six planets, including masses from ellipsoidal variations and Doppler beaming, and compare our results to published values when available. Our results nearly double the number of Kepler exoplanets with measured phase curve variations, thus providing valuable constraints on the properties of hot Jupiters.

  13. A nonlinear dynamical 2D coupled mathematical model for phase transitions in methane gas hydrates within permafrost under climate change

    NASA Astrophysics Data System (ADS)

    Duxbury, N. S.; Romanovsky, V. E.; Romanovskii, N. N.; Garagulya, L. S.; Brouchkov, A. V.; Komarov, I. A.; Roman, L. T.; Tipenko, G. S.; Buldovich, S. N.; Maximova, L. N.

    2012-12-01

    We have developed coupled permafrost - carbon physical and numerical models, where carbon is in the form of methane clathrate hydrate ( CH4*6H2O ) in a porous subsurface environment. The driving force for the subsurface temperature field dynamics is climate variations on the Earth's surface. This is an upper boundary condition for the nonlinear evolutionary system of partial differential equations (PDEs) describing subsurface heat transfer (parabolic PDEs) in a generalized Stefan formulation. The developed numerical model is a valuable computational tool to quantitatively study nonlinear dynamical thermal processes with phase transitions in terrestrial and Martian subsurfaces. Our model is multifrontal and therefore allows one to perform computations for a problem with any number of emerging/vanishing phase transition interfaces (both in methane gas hydrate deposits and in permafrost), since the model treats these fronts implicitly in an enthalpy formulation and in corresponding finite-difference scheme. This model takes into account the pressure (and therefore the depth) dependence of the phase transition temperature for methane clathrate hydrate. We have performed model computations using the thermophysical characteristics (heat capacity, density/porosity, thermal conductivity) for the Siberian subsurface. It can be used as a terrestrial analog for the Martian subsurface (e.g., Duxbury et al., 2001). Also, thermophysical coefficients from laboratory experiments for methane clathrate hydrate were used in our model. In addition, our model takes into account the dependence of subsurface thermophysical characteristics on temperature and spatial coordinates. The results of our computations and their interpretation will be presented. References. N. S. Duxbury, I. A. Zotikov, K. H. Nealson, V. E. Romanovsky, F. D. Carsey (2001). A numerical model for an alternative origin of Lake Vostok and its exobiological implications for Mars, Journal of Geophysical Research

  14. Optically transparent thin-film transistors based on 2D multilayer MoS2 and indium zinc oxide electrodes

    NASA Astrophysics Data System (ADS)

    Kwon, Junyeon; Hong, Young Ki; Kwon, Hyuk-Jun; Park, Yu Jin; Yoo, Byungwook; Kim, Jiwan; Grigoropoulos, Costas P.; Oh, Min Suk; Kim, Sunkook

    2015-01-01

    We report on optically transparent thin film transistors (TFTs) fabricated using multilayered molybdenum disulfide (MoS2) as the active channel, indium tin oxide (ITO) for the back-gated electrode and indium zinc oxide (IZO) for the source/drain electrodes, respectively, which showed more than 81% transmittance in the visible wavelength. In spite of a relatively large Schottky barrier between MoS2 and IZO, the n-type behavior with a field-effect mobility (μeff) of 1.4 cm2 V-1 s-1 was observed in as-fabricated transparent MoS2 TFT. In order to enhance the performances of transparent MoS2 TFTs, a picosecond pulsed laser was selectively irradiated onto the contact region of the IZO electrodes. Following laser annealing, μeff increased to 4.5 cm2 V-1 s-1, and the on-off current ratio (Ion/Ioff) increased to 104, which were attributed to the reduction of the contact resistance between MoS2 and IZO.

  15. Optical remote sensing of the SO2 plume from Popocatepetl volcano (Mexico): 2D visualization and flux estimations

    NASA Astrophysics Data System (ADS)

    Basaldud, R.; Grutter, M.; Baumgardner, D.; Harig, R.; Junkerman, W.; Rivera-Cardenas, C.; Delgado, H.; Woehrnschimmel, H.

    2007-05-01

    Popocatepetl volcano (19.023N, 98.622W, 5452 masl) is a passively degassing eruptive volcano with a current average emission of 5 kt/d of sulfur dioxide, which is located in the central front of the Mexican Transvolcanic Belt . It is approx. 60 km SE of Mexico City and 45 km NW from Puebla City. SO2 emissions from the volcano are known to interact with urban pollution playing a role in the atmospheric chemistry and the formation of particles. Optical remote sensing techniques were deployed during March 2006 to study the dispersion of the volcanic plume and to quantify the SO2 fluxes. A Scanning Infrared Gas Imaging System (SIGIS) was used to acquire passive IR spectra at 4 cm-1 resolution in a two-dimensional array, from which a false-color image was produced representing the degree of correlation of a specific gaseous pollutant. A real-life animation of the SO2- distribution from the volcanic plume allows understanding dispersion phenomena in various atmospheric conditions. Passive DOAS instruments installed both on ground and from an ultra-light aircraft, allowed for discrete SO2 column measurements below the plume. Flux estimations were done using wind profiles from balloons launched periodically

  16. Facile synthesis of 2-D Cu doped WO3 nanoplates with structural, optical and differential anti cancer characteristics

    NASA Astrophysics Data System (ADS)

    Mehmood, Faisal; Iqbal, Javed; Gul, Asma; Ahmed, Waqqar; Ismail, M.

    2017-04-01

    Simple chemical co-precipitation method has been employed to synthesize two dimensional copper (Cu) doped tungsten oxide (WO3) nanoplates. A numbers of characterization techniques have been used to investigate their structural, optical and biocompatible anti cancer properties. The XRD results have confirmed the monoclinic crystal structure of WO3 nanoplates, and also successful doping of Cu ions into the WO3 crystal lattice. The presence of functional groups and chemical bonding have been verified through FTIR and Raman spectroscopy. The SEM images demonstrate that both undoped and Cu doped WO3 samples have squares plate like morphology. The EDX spectra confirm the presence of Cu, W and O ions. Diffuse reflectance spectroscopy (DRS) analysis has revealed a substantial red-shift in the absorption edge and a decrease in the band gap energy of nanoplates with Cu doping. Photoluminescence spectroscopy has been used to study the presence of defects like oxygen vacancies. Furthermore, the differential cytotoxic properties of Cu doped WO3 samples have been evaluated against human breast (MCF-7) and liver (Hep-2) cancer cells with ectocervical epithelial (HECE) healthy cells. The present findings confirm that the Cu doped WO3 nanoplates can be used as an efficient biocompatible anti cancer agent.

  17. Orbital dependent Rashba splitting and electron-phonon coupling of 2D Bi phase on Cu(100) surface

    SciTech Connect

    Gargiani, Pierluigi; Lisi, Simone; Betti, Maria Grazia; Ibrahimi, Amina Taleb; Bertran, François; Le Fèvre, Patrick; Chiodo, Letizia

    2013-11-14

    A monolayer of bismuth deposited on the Cu(100) surface forms a highly ordered c(2×2) reconstructed phase. The low energy single particle excitations of the c(2×2) Bi/Cu(100) present Bi-induced states with a parabolic dispersion in the energy region close to the Fermi level, as observed by angle-resolved photoemission spectroscopy. The electronic state dispersion, the charge density localization, and the spin-orbit coupling have been investigated combining photoemission spectroscopy and density functional theory, unraveling a two-dimensional Bi phase with charge density well localized at the interface. The Bi-induced states present a Rashba splitting, when the charge density is strongly localized in the Bi plane. Furthermore, the temperature dependence of the spectral density close to the Fermi level has been evaluated. Dispersive electronic states offer a large number of decay channels for transitions coupled to phonons and the strength of the electron-phonon coupling for the Bi/Cu(100) system is shown to be stronger than for Bi surfaces and to depend on the electronic state symmetry and localization.

  18. Optical signal monitoring in phase modulated optical fiber transmission systems

    NASA Astrophysics Data System (ADS)

    Zhao, Jian

    Optical performance monitoring (OPM) is one of the essential functions for future high speed optical networks. Among the parameters to be monitored, chromatic dispersion (CD) is especially important since it has a significant impact on overall system performance. In this thesis effective CD monitoring approaches for phase-shift keying (PSK) based optical transmission systems are investigated. A number of monitoring schemes based on radio frequency (RF) spectrum analysis and delay-tap sampling are proposed and their performance evaluated. A method for dispersion monitoring of differential phase-shift keying (DPSK) signals based on RF power detection is studied. The RF power spectrum is found to increase with the increase of CD and decrease with polarization mode dispersion (PMD). The spectral power density dependence on CD is studied theoretically and then verified through simulations and experiments. The monitoring sensitivity for nonreturn-to-zero differential phase-shift keying (NRZ-DPSK) and return-to-zero differential phase-shift keying (RZ-DPSK) based systems can reach 80ps/nm/dB and 34ps/nm/dB respectively. The scheme enables the monitoring of differential group delay (DGD) and CD simultaneously. The monitoring sensitivity of CD and DGD can reach 56.7ps/nm/dB and 3.1ps/dB using a bandpass filter. The effects of optical signal-to-noise ratio (OSNR), DGD, fiber nonlinearity and chirp on the monitoring results are investigated. Two RF pilot tones are employed for CD monitoring of DPSK signals. Specially selected pilot tone frequencies enable good monitoring sensitivity with minimum influence on the received signals. The dynamic range exceeding 35dB and monitoring sensitivity up to 9.5ps/nm/dB are achieved. Asynchronous sampling technique is employed for CD monitoring. A signed CD monitoring method for 10Gb/s NRZ-DPSK and RZ-DPSK systems using asynchronous delay-tap sampling technique is studied. The demodulated signals suffer asymmetric waveform distortion if

  19. Preliminary clinical results: an analyzing tool for 2D optical imaging in detection of active inflammation in rheumatoid arthritis

    NASA Astrophysics Data System (ADS)

    Adi Aizudin Bin Radin Nasirudin, Radin; Meier, Reinhard; Ahari, Carmen; Sievert, Matti; Fiebich, Martin; Rummeny, Ernst J.; No"l, Peter B.

    2011-03-01

    Optical imaging (OI) is a relatively new method in detecting active inflammation of hand joints of patients suffering from rheumatoid arthritis (RA). With the high number of people affected by this disease especially in western countries, the availability of OI as an early diagnostic imaging method is clinically highly relevant. In this paper, we present a newly in-house developed OI analyzing tool and a clinical evaluation study. Our analyzing tool extends the capability of existing OI tools. We include many features in the tool, such as region-based image analysis, hyper perfusion curve analysis, and multi-modality image fusion to aid clinicians in localizing and determining the intensity of inflammation in joints. Additionally, image data management options, such as the full integration of PACS/RIS, are included. In our clinical study we demonstrate how OI facilitates the detection of active inflammation in rheumatoid arthritis. The preliminary clinical results indicate a sensitivity of 43.5%, a specificity of 80.3%, an accuracy of 65.7%, a positive predictive value of 76.6%, and a negative predictive value of 64.9% in relation to clinical results from MRI. The accuracy of inflammation detection serves as evidence to the potential of OI as a useful imaging modality for early detection of active inflammation in patients with rheumatoid arthritis. With our in-house developed tool we extend the usefulness of OI imaging in the clinical arena. Overall, we show that OI is a fast, inexpensive, non-invasive and nonionizing yet highly sensitive and accurate imaging modality.-

  20. High spatiotemporal resolution measurement of regional lung air volumes from 2D phase contrast x-ray images

    SciTech Connect

    Leong, Andrew F. T.; Islam, M. Sirajul; Kitchen, Marcus J.; Fouras, Andreas; Wallace, Megan J.; Hooper, Stuart B.

    2013-04-15

    Purpose: Described herein is a new technique for measuring regional lung air volumes from two-dimensional propagation-based phase contrast x-ray (PBI) images at very high spatial and temporal resolution. Phase contrast dramatically increases lung visibility and the outlined volumetric reconstruction technique quantifies dynamic changes in respiratory function. These methods can be used for assessing pulmonary disease and injury and for optimizing mechanical ventilation techniques for preterm infants using animal models. Methods: The volumetric reconstruction combines the algorithms of temporal subtraction and single image phase retrieval (SIPR) to isolate the image of the lungs from the thoracic cage in order to measure regional lung air volumes. The SIPR algorithm was used to recover the change in projected thickness of the lungs on a pixel-by-pixel basis (pixel dimensions {approx}16.2 {mu}m). The technique has been validated using numerical simulation and compared results of measuring regional lung air volumes with and without the use of temporal subtraction for removing the thoracic cage. To test this approach, a series of PBI images of newborn rabbit pups mechanically ventilated at different frequencies was employed. Results: Regional lung air volumes measured from PBI images of newborn rabbit pups showed on average an improvement of at least 20% in 16% of pixels within the lungs in comparison to that measured without the use of temporal subtraction. The majority of pixels that showed an improvement was found to be in regions occupied by bone. Applying the volumetric technique to sequences of PBI images of newborn rabbit pups, it is shown that lung aeration at birth can be highly heterogeneous. Conclusions: This paper presents an image segmentation technique based on temporal subtraction that has successfully been used to isolate the lungs from PBI chest images, allowing the change in lung air volume to be measured over regions as small as the pixel size. Using

  1. Method for Implementing Optical Phase Adjustment

    NASA Technical Reports Server (NTRS)

    Hovde, David C.; Corsini, Eric

    2011-01-01

    A method has been developed to mechanically implement the optical phase shift by adjusting the polarization of the pump and probe beams in an NMOR (nonlinear magneto-optical rotation) magnetometer as the proper phase shift is necessary to induce self-oscillation. This innovation consists of mounting the pump beam on a ring that surrounds the atomic vapor sample. The propagation of the probe beam is perpendicular to that of the pump beam. The probe beam can be considered as defining the axis of a cylinder, while the pump beam is directed radially. The magnetic field to be measured defines a third vector, but it is also taken to lie along the cylinder axis. Both the pump and probe beams are polarized such that their electric field vectors are substantially perpendicular to the magnet field. By rotation of the ring supporting the pump beam, its direction can be varied relative to the plane defined by the probe electric field and the magnetic field to be measured.

  2. Adaptive optics and phase diversity imaging for responsive space applications.

    SciTech Connect

    Smith, Mark William; Wick, David Victor

    2004-11-01

    The combination of phase diversity and adaptive optics offers great flexibility. Phase diverse images can be used to diagnose aberrations and then provide feedback control to the optics to correct the aberrations. Alternatively, phase diversity can be used to partially compensate for aberrations during post-detection image processing. The adaptive optic can produce simple defocus or more complex types of phase diversity. This report presents an analysis, based on numerical simulations, of the efficiency of different modes of phase diversity with respect to compensating for specific aberrations during post-processing. It also comments on the efficiency of post-processing versus direct aberration correction. The construction of a bench top optical system that uses a membrane mirror as an active optic is described. The results of characterization tests performed on the bench top optical system are presented. The work described in this report was conducted to explore the use of adaptive optics and phase diversity imaging for responsive space applications.

  3. Phase-rotation based receive-beamformer for miniaturized volumetric ultrasound imaging scanners using 2-D CMUT-on-ASIC arrays

    NASA Astrophysics Data System (ADS)

    Kim, Bae-Hyung; Lee, Seunghun; Song, Jongkeun; Kim, Youngil; Jeon, Taeho; Cho, Kyungil

    2013-03-01

    Up-to-date capacitive micromachined ultrasonic transducer (CMUT) technologies provide us unique opportunities to minimize the size and cost of ultrasound scanners by integrating front-end circuits into CMUT arrays. We describe a design prototype of a portable ultrasound scan-head probe using 2-D phased CMUT-on-ASIC arrays of 3-MHz 250 micrometer-pitch by fabricating and integrating front-end electronics with 2-D CMUT array elements. One of the objectives of our work is to design a receive beamformer architecture for the smart probe with compact size and comparable performance. In this work, a phase-rotation based receive beamformer using the sampling frequency of 4 times the center frequency and a hybrid beamforming to reduce the channel counts of the system-side are introduced. Parallel beamforming is considered for the purpose of saving power consumption of battery (by firing fewer times per image frame). This architecture has the advantage of directly obtaining I and Q components. By using the architecture, the interleaved I/Q data from the storage is acquired and I/Q demodulation for baseband processing is directly achieved without demodulators including sin and cosine lookup tables and mixers. Currently, we are extending the presented architecture to develop a true smart probe by including lower power devices and cooling systems, and bringing wireless data transmission into consideration.

  4. 1-kHz two-dimensional coherent anti-Stokes Raman scattering (2D-CARS) for gas-phase thermometry.

    PubMed

    Miller, Joseph D; Slipchenko, Mikhail N; Mance, Jason G; Roy, Sukesh; Gord, James R

    2016-10-31

    Two-dimensional gas-phase coherent anti-Stokes Raman scattering (2D-CARS) thermometry is demonstrated at 1 kHz in a heated jet. A hybrid femtosecond/picosecond CARS configuration is used in a two-beam phase-matching arrangement with a 100-femtosecond pump/Stokes pulse and a 107-picosecond probe pulse. The femtosecond pulse is generated using a mode-locked oscillator and regenerative amplifier that is synchronized to a separate picosecond oscillator and burst-mode amplifier. The CARS signal is spectrally dispersed in a custom imaging spectrometer and detected using a high-speed camera with image intensifier. 1-kHz, single-shot planar measurements at room temperature exhibit error of 2.6% and shot-to-shot variations of 2.6%. The spatial variation in measured temperature is 9.4%. 2D-CARS temperature measurements are demonstrated in a heated O2 jet to capture the spatiotemporal evolution of the temperature field.

  5. AlGaAs phased array laser for optical communications

    NASA Technical Reports Server (NTRS)

    Carlson, N. W.

    1989-01-01

    Phased locked arrays of multiple AlGaAs diode laser emitters were investigated both in edge emitting and surface emitting configurations. CSP edge emitter structures, coupled by either evanescent waves or Y-guides, could not achieve the required powers (greater than or similar to 500 mW) while maintaining a diffraction limited, single lobed output beam. Indeed, although the diffraction limit was achieved in this type of device, it was at low powers and in the double lobed radiation pattern characteristic of out-of-phase coupling. Grating surface emitting (GSE) arrays were, therefore, investigated with more promising results. The incorporation of second order gratings in distribute Bragg reflector (DBR) structures allows surface emission, and can be configured to allow injection locking and lateral coupling to populate 2-D arrays that should be able to reach power levels commensurate with the needs of high performance, free space optical communications levels. Also, a new amplitude modulation scheme was developed for GSE array operation.

  6. Analysis Of Noise In Optical Phase-Locked Loop

    NASA Technical Reports Server (NTRS)

    Win, Moe Z.; Chen, Chien C.; Scholtz, Robert A.

    1993-01-01

    Report presents theoretical and experimental analysis of noise in coherent optical phase-locked loop. Optical phase-locked loop being considered for use in heterodyne reception of binary pulse-position modulation at data rate of 100 Kb/s in optical communication system in which transmitter also includes frequency-stabilized laser.

  7. Acoustically steered and rotated (ASTRO) optoelectronic 2D true-time-delay generation

    NASA Astrophysics Data System (ADS)

    Paek, Eung Gi; Choe, Joon Y.; Oh, Tae Kwan

    1997-12-01

    A new 2-D true time delay (TTD) generation system architecture for phased array antennas is described. The method uses fiber chirp gratings and acousto-optic beam deflectors. By combining free-space optics and guided optics, the device complexity in conventional TTD systems has been significantly reduced. A proof-of-concept experimental results are demonstrated.

  8. 2D equation-of-state model for corona phase molecular recognition on single-walled carbon nanotube and graphene surfaces.

    PubMed

    Ulissi, Zachary W; Zhang, Jingqing; Sresht, Vishnu; Blankschtein, Daniel; Strano, Michael S

    2015-01-13

    Corona phase molecular recognition (CoPhMoRe) has been recently introduced as a means of generating synthetic molecular recognition sites on nanoparticle surfaces. A synthetic heteropolymer is adsorbed and confined to the surface of a nanoparticle, forming a corona phase capable of highly selective molecular recognition due to the conformational imposition of the particle surface on the polymer. In this work, we develop a computationally predictive model for analytes adsorbing onto one type of polymer corona phase composed of hydrophobic anchors on hydrophilic loops around a single-walled carbon nanotube (SWCNT) surface using a 2D equation of state that takes into consideration the analyte-polymer, analyte-nanoparticle, and polymer-nanoparticle interactions using parameters determined independently from molecular simulation. The SWCNT curvature is found to contribute weakly to the overall interaction energy, exhibiting no correlation for three of the corona phases considered, and differences of less than 5% and 20% over a larger curvature range for two other corona phases, respectively. Overall, the resulting model for this anchor-loop CoPhMoRe is able to correctly predict 83% of an experimental 374 analyte-polymer library, generating experimental fluorescence responses within 20% error of the experimental values. The modeling framework presented here represents an important step forward in the design of suitable polymers to target specific analytes.

  9. Effect of residual phase gradients in optical null interference.

    PubMed

    Naik, Dinesh N; Pradeep Chakravarthy, T; Viswanathan, Nirmal K

    2016-01-01

    A scheme to study the effect of residual phase gradients in an optical interference between two out-of-phase Gaussian beams is proposed. In a Sagnac interferometer configured to provide a null output, a variable linear phase swept across the null point unfolds an optical field rotation due to an apparently negligible residual phase gradient present orthogonal to the linear phase sweep. As the optical beam that rotates around its propagation axis carries orbital angular momentum, the experimental results presented in this Letter could provide an insight into the momentum change associated with the energy redistribution in the fundamental phenomenon of optical interference.

  10. A method of 2D/3D registration of a statistical mouse atlas with a planar X-ray projection and an optical photo

    PubMed Central

    Wang, Hongkai; Stout, David B; Chatziioannou, Arion F

    2013-01-01

    The development of sophisticated and high throughput whole body small animal imaging technologies has created a need for improved image analysis and increased automation. The registration of a digital mouse atlas to individual images is a prerequisite for automated organ segmentation and uptake quantification. This paper presents a fully-automatic method for registering a statistical mouse atlas with individual subjects based on an anterior-posterior X-ray projection and a lateral optical photo of the mouse silhouette. The mouse atlas was trained as a statistical shape model based on 83 organ-segmented micro-CT images. For registration, a hierarchical approach is applied which first registers high contrast organs, and then estimates low contrast organs based on the registered high contrast organs. To register the high contrast organs, a 2D-registration-back-projection strategy is used that deforms the 3D atlas based on the 2D registrations of the atlas projections. For validation, this method was evaluated using 55 subjects of preclinical mouse studies. The results showed that this method can compensate for moderate variations of animal postures and organ anatomy. Two different metrics, the Dice coefficient and the average surface distance, were used to assess the registration accuracy of major organs. The Dice coefficients vary from 0.31±0.16 for the spleen to 0.88±0.03 for the whole body, and the average surface distance varies from 0.54±0.06 mm for the lungs to 0.85±0.10 mm for the skin. The method was compared with a direct 3D deformation optimization (without 2D-registration-back-projection) and a single-subject atlas registration (instead of using the statistical atlas). The comparison revealed that the 2D-registration-back-projection strategy significantly improved the registration accuracy, and the use of the statistical mouse atlas led to more plausible organ shapes than the single-subject atlas. This method was also tested with shoulder xenograft

  11. Use of Caval Subtraction 2D Phase-Contrast MR Imaging to Measure Total Liver and Hepatic Arterial Blood Flow: Preclinical Validation and Initial Clinical Translation.

    PubMed

    Chouhan, Manil D; Mookerjee, Rajeshwar P; Bainbridge, Alan; Walker-Samuel, Simon; Davies, Nathan; Halligan, Steve; Lythgoe, Mark F; Taylor, Stuart A

    2016-09-01

    Purpose To validate caval subtraction two-dimensional (2D) phase-contrast magnetic resonance (MR) imaging measurements of total liver blood flow (TLBF) and hepatic arterial fraction in an animal model and evaluate consistency and reproducibility in humans. Materials and Methods Approval from the institutional ethical committee for animal care and research ethics was obtained. Fifteen Sprague-Dawley rats underwent 2D phase-contrast MR imaging of the portal vein (PV) and infrahepatic and suprahepatic inferior vena cava (IVC). TLBF and hepatic arterial flow were estimated by subtracting infrahepatic from suprahepatic IVC flow and PV flow from estimated TLBF, respectively. Direct PV transit-time ultrasonography (US) and fluorescent microsphere measurements of hepatic arterial fraction were the standards of reference. Thereafter, consistency of caval subtraction phase-contrast MR imaging-derived TLBF and hepatic arterial flow was assessed in 13 volunteers (mean age, 28.3 years ± 1.4) against directly measured phase-contrast MR imaging PV and proper hepatic arterial inflow; reproducibility was measured after 7 days. Bland-Altman analysis of agreement and coefficient of variation comparisons were undertaken. Results There was good agreement between PV flow measured with phase-contrast MR imaging and that measured with transit-time US (mean difference, -3.5 mL/min/100 g; 95% limits of agreement [LOA], ±61.3 mL/min/100 g). Hepatic arterial fraction obtained with caval subtraction agreed well with those with fluorescent microspheres (mean difference, 4.2%; 95% LOA, ±20.5%). Good consistency was demonstrated between TLBF in humans measured with caval subtraction and direct inflow phase-contrast MR imaging (mean difference, -1.3 mL/min/100 g; 95% LOA, ±23.1 mL/min/100 g). TLBF reproducibility at 7 days was similar between the two methods (95% LOA, ±31.6 mL/min/100 g vs ±29.6 mL/min/100 g). Conclusion Caval subtraction phase-contrast MR imaging is a simple and clinically

  12. Number-Phase Uncertainty Relations for Optical Fields

    NASA Technical Reports Server (NTRS)

    Tanas, Ryszard

    1996-01-01

    The Hermitian phase formalism of Pegg and Barnett allows for direct calculations of the phase variance and, consequently, the number-phase uncertainty product. This gives us a unique opportunity, inaccessible before, to study the number-phase uncertainty relations for optical fields in a direct way within a consistent quantum formalism. A few examples of fields generated in nonlinear optical processes are studied from the point of view of their number-phase uncertainty relations.

  13. Risk of renal cell carcinoma and polymorphism in phase I xenobiotic metabolizing CYP1A1 and CYP2D6 enzymes.

    PubMed

    Ahmad, Shiekh Tanveer; Arjumand, Wani; Seth, Amlesh; Nafees, Sana; Rashid, Summya; Ali, Nemat; Hamiza, Oday O; Sultana, Sarwat

    2013-10-01

    The progressive increase in sporadic renal cell carcinoma (RCC) observed in industrialized countries supports the opinion that certain carcinogens present in the environment (tobacco smoke, drugs, pollutants, and dietary constituents) may affect the occurrence and progression of this disease in developing countries like India. The polymorphism of the enzymes involved in metabolism of such environmental factors may, therefore, confer variable propensity to RCC. The possible association between RCC and a polymorphism of the CYP1A1 and CYP2D6 genes specific to the Indian population was examined using peripheral blood DNA from 196 RCC cases and 250 population controls with detailed data of clinicopathologic characteristics for the disease. The CYP1A1 (val) "variant" genotype, which contains at least 1 copy of the CYP1A1 variant alleles, was found to be associated with a 2.03-fold [GG ver. AA/AG, unadjusted OR = 2.03; 95%CI = 1.233-3.342; P = 0.005] increase in the risk of RCC. There was also a significant association (p(trend) = 0.034) between higher frequency of RCC subjects containing at least of copy of the CYP1A1 (val) "variant" genotype with III or IV Fuhrman's grade. Whereas, the CYP2D6 polymorphism did not show any association with RCC risk [TT ver. CT/CC, unadjusted OR = 95%CI = 1.233-3.342; P = 0.005]. There was a significant association (p(trend) = 0.001) between the poor metabolizer CYP2D6 (TT) and progression towards higher pathological stage of RCC. Our data demonstrate for the first time a significant association between pharmacogenetic polymorphisms of CYP1A1 and risk of RCC development in the Indian population. The findings suggest that inter-individual variation in the phase I metabolic enzymes involved in the fictionalization and detoxification of specific xenobiotics is an important susceptibility factor for development and progression of RCC in Indians.

  14. The CU 2-D-MAX-DOAS instrument – Part 2: Raman scattering probability measurements and retrieval of aerosol optical properties

    DOE PAGES

    Ortega, Ivan; Coburn, Sean; Berg, Larry K.; ...

    2016-08-23

    The multiannual global mean of aerosol optical depth at 550 nm (AOD550) over land is ∼ 0.19, and that over oceans is ∼ 0.13. About 45 % of the Earth surface shows AOD550 smaller than 0.1. There is a need for measurement techniques that are optimized to measure aerosol optical properties under low AOD conditions. We present an inherently calibrated retrieval (i.e., no need for radiance calibration) to simultaneously measure AOD and the aerosol phase function parameter, g, based on measurements of azimuth distributions of the Raman scattering probability (RSP), the near-absolute rotational Raman scattering (RRS) intensity. We employ radiative transfer model simulations tomore » show that for solar azimuth RSP measurements at solar elevation and solar zenith angle (SZA) smaller than 80°, RSP is insensitive to the vertical distribution of aerosols and maximally sensitive to changes in AOD and g under near-molecular scattering conditions. The University of Colorado two-dimensional Multi-AXis Differential Optical Absorption Spectroscopy (CU 2-D-MAX-DOAS) instrument was deployed as part of the Two Column Aerosol Project (TCAP) at Cape Cod, MA, during the summer of 2012 to measure direct sun spectra and RSP from scattered light spectra at solar relative azimuth angles (SRAAs) between 5 and 170°. During two case study days with (1) high aerosol load (17 July, 0.3  <  AOD430 < 0.6) and (2) near-molecular scattering conditions (22 July, AOD430 < 0.13) we compare RSP-based retrievals of AOD430 and g with data from a co-located CIMEL sun photometer, Multi-Filter Rotating Shadowband Radiometer (MFRSR), and an airborne High Spectral Resolution Lidar (HSRL-2). The average difference (relative to DOAS) for AOD430 is +0.012 ± 0.023 (CIMEL), −0.012 ± 0.024 (MFRSR), −0.011 ± 0.014 (HSRL-2), and +0.023 ± 0.013 (CIMELAOD − MFRSRAOD) and yields the following expressions for correlations between different instruments

  15. Optical implementation of cipher block chaining mode algorithm using phase-shifting digital holography

    NASA Astrophysics Data System (ADS)

    Jeon, Seok-Hee; Gil, Sang-Keun

    2016-12-01

    We propose an optical design of cipher block chaining (CBC) encryption mode using digital holography, which is implemented by the two-step quadrature phase-shifting digital holographic encryption technique using orthogonal polarization. A block of plain text is encrypted with the encryption key by applying the two-step phase-shifting digital holographic method; then, it is changed into cipher text blocks which are digital holograms. Optically, these digital holograms with the encrypted information are Fourier transform holograms and are recorded onto charge-coupled devices with 256 quantization gray levels. This means that the proposed optical CBC encryption is a scheme that has an analog-type of pseudorandom pattern information in the cipher text, while the conventional electronic CBC encryption is a kind of bitwise block message encryption processed by digital bits. Also, the proposed method enables the cryptosystem to have higher security strength and faster processing than the conventional electronic method because of the large two-dimensional (2-D) array key space and parallel processing. The results of computer simulations verify that the proposed optical CBC encryption design is very effective in CBC mode due to fast and secure optical encryption of 2-D data and shows the feasibility for the CBC encryption mode.

  16. Coherent optical monolithic phased-array antenna steering system

    DOEpatents

    Hietala, Vincent M.; Kravitz, Stanley H.; Vawter, Gregory A.

    1994-01-01

    An optical-based RF beam steering system for phased-array antennas comprising a photonic integrated circuit (PIC). The system is based on optical heterodyning employed to produce microwave phase shifting by a monolithic PIC constructed entirely of passive components. Microwave power and control signal distribution to the antenna is accomplished by optical fiber, permitting physical separation of the PIC and its control functions from the antenna. The system reduces size, weight, complexity, and cost of phased-array antenna systems.

  17. How isopolyanions self-assemble and condense into a 2D tungsten oxide crystal: HRTEM imaging of atomic arrangement in an intermediate new hexagonal phase

    SciTech Connect

    Chemseddine, A. Bloeck, U.

    2008-10-15

    The structure and structural evolution of tungstic acid solutions, sols and gels are investigated by high-resolution electron microscopy (HRTEM). Acidification of sodium tungstate solutions, through a proton exchange resin, is achieved in a way that ensures homogeneity in size and shape of intermediate polytungstic species. Gelation is shown to involve polycondensation followed by a self-assembling process of polytungstic building blocks leading to sheets with a layered hexagonal structure. Single layers of this new metastable phase are composed of three-, four- and six-membered rings of WO{sub 6} octahedra located in the same plane. This is the first time that a 2D oxide crystal is isolated and observed by direct atomic resolution. Further ageing and structural evolution leading to single sheets of 2D ReO{sub 3}-type structure is directly observed by HRTEM. Based on this atomic level imaging, a model for the formation of the oxide network structure involving a self-assembling process of tritungstic based polymeric chain is proposed. The presence of tritungstic groups and their packing in electrochromic WO{sub 3} films made by different techniques is discussed. - Graphical abstract: From the isopolyanion to the extended bulk tungsten oxide: HRTEM imaging.

  18. Metastable phase formation during α2(D019) to γ(L10) transformation in as-atomized γ-TiAl alloy powders

    NASA Astrophysics Data System (ADS)

    Karadge, M.; Gouma, P. I.

    2004-11-01

    α2(D019) to γ(L10) transformation during heating of as-atomized γ-TiAl powder was investigated by differential scanning calorimetry and x-ray diffraction. The as-atomized coarse powder particles (γ-TiAl powder: Ti -45Al-2Nb-0.7Mo-0.1W-2Cr-0.27O-0.2Si) with large amounts of retained α2 are a perfect candidate to investigate this transformation. It was observed that α2 to γ transformation is a two-step process involving the formation of a disordered face-centered-cubic γ 'TiAl [with a (γ')=c(γ)] as an intermediate phase followed by ordering.

  19. The influence of underwater turbulence on optical phase measurements

    NASA Astrophysics Data System (ADS)

    Redding, Brandon; Davis, Allen; Kirkendall, Clay; Dandridge, Anthony

    2016-05-01

    Emerging underwater optical imaging and sensing applications rely on phase-sensitive detection to provide added functionality and improved sensitivity. However, underwater turbulence introduces spatio-temporal variations in the refractive index of water which can degrade the performance of these systems. Although the influence of turbulence on traditional, non-interferometric imaging has been investigated, its influence on the optical phase remains poorly understood. Nonetheless, a thorough understanding of the spatio-temporal dynamics of the optical phase of light passing through underwater turbulence are crucial to the design of phase-sensitive imaging and sensing systems. To address this concern, we combined underwater imaging with high speed holography to provide a calibrated characterization of the effects of turbulence on the optical phase. By measuring the modulation transfer function of an underwater imaging system, we were able to calibrate varying levels of optical turbulence intensity using the Simple Underwater Imaging Model (SUIM). We then used high speed holography to measure the temporal dynamics of the optical phase of light passing through varying levels of turbulence. Using this method, we measured the variance in the amplitude and phase of the beam, the temporal correlation of the optical phase, and recorded the turbulence induced phase noise as a function of frequency. By bench marking the effects of varying levels of turbulence on the optical phase, this work provides a basis to evaluate the real-world potential of emerging underwater interferometric sensing modalities.

  20. An all-regime Lagrange-Projection like scheme for 2D homogeneous models for two-phase flows on unstructured meshes

    NASA Astrophysics Data System (ADS)

    Chalons, Christophe; Girardin, Mathieu; Kokh, Samuel

    2017-04-01

    We propose an all regime Lagrange-Projection like numerical scheme for 2D homogeneous models for two-phase flows. By all regime, we mean that the numerical scheme is able to compute accurate approximate solutions with an under-resolved discretization, i.e. a mesh size and time step much bigger than the Mach number M of the mixture. The key idea is to decouple acoustic, transport and phase transition phenomenon using a Lagrange-Projection decomposition in order to treat implicitly (fast) acoustic and phase transition phenomenon and explicitly the (slow) transport phenomena. Then, extending a strategy developed in the case of the usual gas dynamics equations, we alter the numerical flux in the acoustic approximation to obtain a uniform truncation error in terms of M. This modified scheme is conservative and endowed with good stability properties with respect to the positivity of the density and preserving the mass fraction within the interval (0 , 1). Numerical evidences are proposed and show the ability of the scheme to deal with cases where the flow regime may vary from low to high Mach values.

  1. Optoelectronics with 2D semiconductors

    NASA Astrophysics Data System (ADS)

    Mueller, Thomas

    2015-03-01

    Two-dimensional (2D) atomic crystals, such as graphene and layered transition-metal dichalcogenides, are currently receiving a lot of attention for applications in electronics and optoelectronics. In this talk, I will review our research activities on electrically driven light emission, photovoltaic energy conversion and photodetection in 2D semiconductors. In particular, WSe2 monolayer p-n junctions formed by electrostatic doping using a pair of split gate electrodes, type-II heterojunctions based on MoS2/WSe2 and MoS2/phosphorene van der Waals stacks, 2D multi-junction solar cells, and 3D/2D semiconductor interfaces will be presented. Upon optical illumination, conversion of light into electrical energy occurs in these devices. If an electrical current is driven, efficient electroluminescence is obtained. I will present measurements of the electrical characteristics, the optical properties, and the gate voltage dependence of the device response. In the second part of my talk, I will discuss photoconductivity studies of MoS2 field-effect transistors. We identify photovoltaic and photoconductive effects, which both show strong photoconductive gain. A model will be presented that reproduces our experimental findings, such as the dependence on optical power and gate voltage. We envision that the efficient photon conversion and light emission, combined with the advantages of 2D semiconductors, such as flexibility, high mechanical stability and low costs of production, could lead to new optoelectronic technologies.

  2. Facile synthesis of 2D CuO nanoleaves for the catalytic elimination of hazardous and toxic dyes from aqueous phase: a sustainable approach.

    PubMed

    Bhattacharjee, Archita; Begum, Shamima; Neog, Kashmiri; Ahmaruzzaman, M

    2016-06-01

    This article reports for the first time a facile, green synthesis of 2D CuO nanoleaves (NLs) using the amino acid, namely aspartic acid, and NaOH by a microwave heating method. The amino acid acts as a complexing/capping agent in the synthesis of CuO NLs. This method resulted in the formation of self-assembled 2D CuO NLs with an average length and width of ~300-400 and ~50-82 nm, respectively. The as-synthesized 2D CuO NLs were built up from the primary CuO nanoparticles by oriented attachment growth mechanism. The CuO NLs were characterized by an X-ray diffraction (XRD) method, transmission electron microscopy (TEM), selected-area electron diffraction (SAED) pattern, and Fourier transform infrared spectroscopy (FT-IR). The optical properties were investigated using UV-visible spectroscopy. For the first time, rose bengal and eosin Y dyes were degraded photochemically by solar irradiation using CuO NLs as a photocatalyst. The synthesized CuO NLs act as an efficient photocatalyst in the degradation of rose bengal and eosin Y dye under direct sunlight. The degradation of both the dyes, namely rose bengal and eosin Y, took place within 120 and 45 min, respectively, using CuO NLs as a photocatalyst, whereas commercial CuO, SnO2 quantum dots (QDs), and commercial SnO2 took more than 120 and 45 min for the degradation of rose bengal and eosin Y, respectively. The synthesized CuO NLs showed a superior photocatalytic activity as compared to that of commercial CuO, SnO2 QDs, and commercial SnO2. The reusability of the CuO NLs as a photocatalyst in the degradation of dyes was investigated, and it was evident that the catalytic efficiency decreases to a small extent (5-6 %) after the fifth cycle of operation.

  3. Surface characterization based on optical phase shifting interferometry

    DOEpatents

    Mello, Michael , Rosakis; Ares J.

    2011-08-02

    Apparatus, techniques and systems for implementing an optical interferometer to measure surfaces, including mapping of instantaneous curvature or in-plane and out-of-plane displacement field gradients of a sample surface based on obtaining and processing four optical interferograms from a common optical reflected beam from the sample surface that are relatively separated in phase by .pi./2.

  4. Theoretical calculations of phase transitions and optical properties of solid iodine under high pressures

    NASA Astrophysics Data System (ADS)

    San, Xiaojiao; Wang, Liancheng; Ma, Yanming; Liu, Zhiming; Cui, Tian; Liu, Bingbing; Zou, Guangtian

    2008-04-01

    The structural stability and optical properties of solid iodine under pressure have been studied using the ab initio pseudopotential plane-wave method. The dependence of lattice parameters on pressure indicates that the first structural phase transition from phase I to phase V occurs at about 20 GPa. From the pressure dependence of our elastic constants for solid iodine in phase I, it is found that the first structural transformation from molecular phase I to the intermediate phase V occurs at about 20 GPa due to the softening of the elastic constant C44, which is very close to the transition pressure of 20 GPa obtained by geometry optimizations and 23.2 GPa obtained by experimental measurements. The optimized structure for phase V is a face-centered orthorhombic (fco) phase with equal interatomic distances d1 = d2 = d3, but this fco structure is mechanically unstable, with shear elastic stiffness coefficient C44<0. To understand the modulated phase V, we use a periodic crystal structure to mimic the incommensurate phase V and obtain some quantitative information. In our calculation, the modulated phase is thermodynamically and mechanically stable. It is believed that phase V is not a monatomic phase but an intermediate state between a molecular and a monatomic state.

  5. Optical beam forming techniques for phased array antennas

    NASA Astrophysics Data System (ADS)

    Wu, Te-Kao; Chandler, C.

    Conventional phased array antennas using waveguide or coax for signal distribution are impractical for large scale implementation on satellites or spacecraft because they exhibit prohibitively large system size, heavy weight, high attenuation loss, limited bandwidth, sensitivity to electromagnetic interference (EMI) temperature drifts and phase instability. However, optical beam forming systems are smaller, lighter, and more flexible. Three optical beam forming techniques are identified as applicable to large spaceborne phased array antennas. They are (1) the optical fiber replacement of conventional RF phased array distribution and control components, (2) spatial beam forming, and (3) optical beam splitting with integrated quasi-optical components. The optical fiber replacement and the spatial beam forming approaches were pursued by many organizations. Two new optical beam forming architectures are presented. Both architectures involve monolithic integration of the antenna radiating elements with quasi-optical grid detector arrays. The advantages of the grid detector array in the optical process are the higher power handling capability and the dynamic range. One architecture involves a modified version of the original spatial beam forming approach. The basic difference is the spatial light modulator (SLM) device for controlling the aperture field distribution. The original liquid crystal light valve SLM is replaced by an optical shuffling SLM, which was demonstrated for the 'smart pixel' technology. The advantages are the capability of generating the agile beams of a phased array antenna and to provide simultaneous transmit and receive functions. The second architecture considered is the optical beam splitting approach. This architecture involves an alternative amplitude control for each antenna element with an optical beam power divider comprised of mirrors and beam splitters. It also implements the quasi-optical grid phase shifter for phase control and grid

  6. Optical beam forming techniques for phased array antennas

    NASA Technical Reports Server (NTRS)

    Wu, Te-Kao; Chandler, C.

    1993-01-01

    Conventional phased array antennas using waveguide or coax for signal distribution are impractical for large scale implementation on satellites or spacecraft because they exhibit prohibitively large system size, heavy weight, high attenuation loss, limited bandwidth, sensitivity to electromagnetic interference (EMI) temperature drifts and phase instability. However, optical beam forming systems are smaller, lighter, and more flexible. Three optical beam forming techniques are identified as applicable to large spaceborne phased array antennas. They are (1) the optical fiber replacement of conventional RF phased array distribution and control components, (2) spatial beam forming, and (3) optical beam splitting with integrated quasi-optical components. The optical fiber replacement and the spatial beam forming approaches were pursued by many organizations. Two new optical beam forming architectures are presented. Both architectures involve monolithic integration of the antenna radiating elements with quasi-optical grid detector arrays. The advantages of the grid detector array in the optical process are the higher power handling capability and the dynamic range. One architecture involves a modified version of the original spatial beam forming approach. The basic difference is the spatial light modulator (SLM) device for controlling the aperture field distribution. The original liquid crystal light valve SLM is replaced by an optical shuffling SLM, which was demonstrated for the 'smart pixel' technology. The advantages are the capability of generating the agile beams of a phased array antenna and to provide simultaneous transmit and receive functions. The second architecture considered is the optical beam splitting approach. This architecture involves an alternative amplitude control for each antenna element with an optical beam power divider comprised of mirrors and beam splitters. It also implements the quasi-optical grid phase shifter for phase control and grid

  7. Continuous-wave phase-matched molecular optical modulator.

    PubMed

    Zaitsu, Shin-ichi; Izaki, Hirotomo; Tsuchiya, Takao; Imasaka, Totaro

    2016-02-18

    In optical modulation, the highest available modulation rate is basically limited to the GHz frequency range at best. This is because optical modulation is often performed using electro-optic or acousto-optic effects that require application of an external signal to solid-state nonlinear optical materials. Here we describe optical modulation of continuous-wave radiation at frequencies exceeding 10 THz based on ultrafast variation of molecule polarizability arising from coherent molecular motion. The optical modulation efficiency is extensively enhanced by fulfilling phase-matching conditions with the help of dispersion control of the optical cavity, generating sidebands with a highest ratio of 7.3 × 10(-3). These results will pave the way for development of versatile optical modulation-based techniques in a wide range of research fields in optical sciences, such as mode-locked lasers operating in the THz range.

  8. Quantum Optical Aspects of Topological Phases, Such as Berry’s Phase

    DTIC Science & Technology

    1993-11-10

    optical phenomena closely related to the Einstein- Podolsky-Rosen "paradox." Berry’s topological phase, which is an Aharonov - Bohm -like phase which a...A39, 3475 (1989). "Berry’s Phases in Optics: Aharonov -Bohin-like Effects and Gauge Stcturm in Surprising Contexts", Nuclear Physics B (Proc. Suppl.) 6

  9. On the Fringe Field of Wide Angle LC Optical Phased Array

    NASA Technical Reports Server (NTRS)

    Wang, Xighua; Wang, Bin; Bos, Philip J.; Anderson, James E.; Pouch, John; Miranda, Felix; McManamon, Paul F.

    2004-01-01

    For free space laser communication, light weighted large deployable optics is a critical component for the transmitter. However, such an optical element will introduce large aberrations due to the fact that the surface figure of the large optics is susceptable to deformation in the space environment. We propose to use a high-resolution liquid crystal spatial light modulator to correct for wavefront aberrations introduced by the primary optical element, and to achieve very fine beam steering and shaping at the same time. A 2-D optical phased array (OPA) antenna based on a Liquid Crystal on Silicon (LCOS) spatial light modulator is described. This device offers a combination of low cost, high resolution, high accuracy, high diffraction efficiency at video speed. To quantitatively understand the influence factor of the different design parameters, a computer simulation of the device is given by the 2-D director simulation and the Finite Difference Time domain (FDTD) simulation. For the 1-D OPA, we define the maximum steering angle to have a grating period of 8 pixel/reset scheme; as for larger steering angles than this criterion, the diffraction efficiency drops dramatically. In this case, the diffraction efficiency of 0.86 and the Strehl ratio of 0.9 are obtained in the simulation. The performance of the device in achieving high resolution wavefront correction and beam steering is also characterized experimentally.

  10. Digital optical phase conjugation of fluorescence in turbid tissue

    SciTech Connect

    Vellekoop, Ivo M.; Cui Meng; Yang Changhuei

    2012-08-20

    We demonstrate a method for phase conjugating fluorescence. Our method, called reference free digital optical phase conjugation, can conjugate extremely weak, incoherent optical signals. It was used to phase conjugate fluorescent light originating from a bead covered with 0.5 mm of light-scattering tissue. The phase conjugated beam refocuses onto the bead and causes a local increase of over two orders of magnitude in the light intensity. Potential applications are in imaging, optical trapping, and targeted photochemical activation inside turbid tissue.

  11. Optical RF distribution links for MMIC phased array antennas

    NASA Technical Reports Server (NTRS)

    Kunath, Richard R.; Bhasin, Kul B.; Raquet, Charles A.

    1987-01-01

    Conventional methods to distribute RF signals to GaAs Monolithic Microwave Integrated Circuits Phased Array Antennas are inadequate for arrays having large numbers of elements. Optical RF distribution links have been proposed as a lightweight, mechanically flexible, and low volume solution. Three candidate techniques for providing optical RF distribution are discussed along with the electro-optic devices required to configure them. A discussion of the present status of applicable electro-optics devices is also included.

  12. Image reconstruction algorithm for optically stimulated luminescence 2D dosimetry using laser-scanned Al2O3:C and Al2O3:C,Mg films

    NASA Astrophysics Data System (ADS)

    Ahmed, M. F.; Schnell, E.; Ahmad, S.; Yukihara, E. G.

    2016-10-01

    The objective of this work was to develop an image reconstruction algorithm for 2D dosimetry using Al2O3:C and Al2O3:C,Mg optically stimulated luminescence (OSL) films imaged using a laser scanning system. The algorithm takes into account parameters associated with detector properties and the readout system. Pieces of Al2O3:C films (~8 mm  ×  8 mm  ×  125 µm) were irradiated and used to simulate dose distributions with extreme dose gradients (zero and non-zero dose regions). The OSLD film pieces were scanned using a custom-built laser-scanning OSL reader and the data obtained were used to develop and demonstrate a dose reconstruction algorithm. The algorithm includes corrections for: (a) galvo hysteresis, (b) photomultiplier tube (PMT) linearity, (c) phosphorescence, (d) ‘pixel bleeding’ caused by the 35 ms luminescence lifetime of F-centers in Al2O3, (e) geometrical distortion inherent to Galvo scanning system, and (f) position dependence of the light collection efficiency. The algorithm was also applied to 6.0 cm  ×  6.0 cm  ×  125 μm or 10.0 cm  ×  10.0 cm  ×  125 µm Al2O3:C and Al2O3:C,Mg films exposed to megavoltage x-rays (6 MV) and 12C beams (430 MeV u-1). The results obtained using pieces of irradiated films show the ability of the image reconstruction algorithm to correct for pixel bleeding even in the presence of extremely sharp dose gradients. Corrections for geometric distortion and position dependence of light collection efficiency were shown to minimize characteristic limitations of this system design. We also exemplify the application of the algorithm to more clinically relevant 6 MV x-ray beam and a 12C pencil beam, demonstrating the potential for small field dosimetry. The image reconstruction algorithm described here provides the foundation for laser-scanned OSL applied to 2D dosimetry.

  13. Image reconstruction algorithm for optically stimulated luminescence 2D dosimetry using laser-scanned Al2O3:C and Al2O3:C,Mg films.

    PubMed

    Ahmed, M F; Schnell, E; Ahmad, S; Yukihara, E G

    2016-10-21

    The objective of this work was to develop an image reconstruction algorithm for 2D dosimetry using Al2O3:C and Al2O3:C,Mg optically stimulated luminescence (OSL) films imaged using a laser scanning system. The algorithm takes into account parameters associated with detector properties and the readout system. Pieces of Al2O3:C films (~8 mm  ×  8 mm  ×  125 µm) were irradiated and used to simulate dose distributions with extreme dose gradients (zero and non-zero dose regions). The OSLD film pieces were scanned using a custom-built laser-scanning OSL reader and the data obtained were used to develop and demonstrate a dose reconstruction algorithm. The algorithm includes corrections for: (a) galvo hysteresis, (b) photomultiplier tube (PMT) linearity, (c) phosphorescence, (d) 'pixel bleeding' caused by the 35 ms luminescence lifetime of F-centers in Al2O3, (e) geometrical distortion inherent to Galvo scanning system, and (f) position dependence of the light collection efficiency. The algorithm was also applied to 6.0 cm  ×  6.0 cm  ×  125 μm or 10.0 cm  ×  10.0 cm  ×  125 µm Al2O3:C and Al2O3:C,Mg films exposed to megavoltage x-rays (6 MV) and (12)C beams (430 MeV u(-1)). The results obtained using pieces of irradiated films show the ability of the image reconstruction algorithm to correct for pixel bleeding even in the presence of extremely sharp dose gradients. Corrections for geometric distortion and position dependence of light collection efficiency were shown to minimize characteristic limitations of this system design. We also exemplify the application of the algorithm to more clinically relevant 6 MV x-ray beam and a (12)C pencil beam, demonstrating the potential for small field dosimetry. The image reconstruction algorithm described here provides the foundation for laser-scanned OSL applied to 2D dosimetry.

  14. Spin-orbit optical cross-phase-modulation

    NASA Astrophysics Data System (ADS)

    Brasselet, Etienne

    2010-12-01

    We show experimentally that optical phase singularities (PSs) can be written and erased, locally and in a controllable manner, into a light beam using the giant Kerr optical nonlinearities of liquid crystals. The method relies on the nonlinear optical spin-orbit coupling experienced by a collimated probe beam when a collinear focused pump beam imprints a radial birefringent pattern into a nematic film. In addition, experimental data are quantitatively described, accounting for the elastic anisotropy of the material and its nonlocal spatial response to the pump light field. Since we show that the optical intensity of a light beam (the “pump”) controls the phase of another beam (the “probe”) in a singular fashion (i.e., with the generation of a screw PS) via their interaction in a nonlinear medium that involves spin-orbit coupling, we dubbed such a nonlinear optical process as spin-orbit optical cross-phase-modulation.

  15. Spin-orbit optical cross-phase-modulation

    SciTech Connect

    Brasselet, Etienne

    2010-12-15

    We show experimentally that optical phase singularities (PSs) can be written and erased, locally and in a controllable manner, into a light beam using the giant Kerr optical nonlinearities of liquid crystals. The method relies on the nonlinear optical spin-orbit coupling experienced by a collimated probe beam when a collinear focused pump beam imprints a radial birefringent pattern into a nematic film. In addition, experimental data are quantitatively described, accounting for the elastic anisotropy of the material and its nonlocal spatial response to the pump light field. Since we show that the optical intensity of a light beam (the 'pump') controls the phase of another beam (the 'probe') in a singular fashion (i.e., with the generation of a screw PS) via their interaction in a nonlinear medium that involves spin-orbit coupling, we dubbed such a nonlinear optical process as spin-orbit optical cross-phase-modulation.

  16. Investigation of Fiber Optics Based Phased Locked Diode Lasers

    NASA Technical Reports Server (NTRS)

    Burke, Paul D.; Gregory, Don A.

    1997-01-01

    Optical power beaming requires a high intensity source and a system to address beam phase and location. A synthetic aperture array of phased locked sources can provide the necessary power levels as well as a means to correct for phase errors. A fiber optic phase modulator with a master oscillator and power amplifier (MOPA) using an injection-locking semiconductor optical amplifier has proven to be effective in correcting phase errors as large as 4pi in an interferometer system. Phase corrections with the piezoelectric fiber stretcher were made from 0 - 10 kHz, with most application oriented corrections requiring only 1 kHz. The amplifier did not lose locked power output while the phase was changed, however its performance was below expectation. Results of this investigation indicate fiber stretchers and amplifiers can be incorporated into a MOPA system to achieve successful earth based power beaming.

  17. Large-Size 2D β-Cu2 S Nanosheets with Giant Phase Transition Temperature Lowering (120 K) Synthesized by a Novel Method of Super-Cooling Chemical-Vapor-Deposition.

    PubMed

    Li, Bo; Huang, Le; Zhao, Guangyao; Wei, Zhongming; Dong, Huanli; Hu, Wenping; Wang, Lin-Wang; Li, Jingbo

    2016-10-01

    2D triangular β-Cu2 S nanosheets with large size and high quality are synthesized by a novel method of super-cooling chemical-vapor-deposition. The phase transition of this 2D material from β-Cu2 S to γ-Cu2 S occurs at 258 K (-15 °C), and such transition temperature is 120 K lower than that of its bulk counterpart (about 378 K).

  18. A linear coherent integrated receiver based on a broadband optical phase-locked loop

    NASA Astrophysics Data System (ADS)

    Ramaswamy, Anand

    Optical Phase-Locked Loops (OPLL) have diverse applications in future communication systems. They can be used in high sensitivity homodyne phase-shift keying receivers for phase noise reduction, provided sufficient loop bandwidth is maintained. Alternative phase-locked loop applications include coherent synchronization of laser arrays and frequency synthesis by offset locking. In this work, a broadband OPLL based coherent receiver is used for linear phase demodulation. Phase modulated (PM) analog optical links have the potential to outperform conventional direct detection links. However, their progress has been stymied by the lack of a linear phase demodulator. We describe how feedback can be used to suppress non-linearities arising from the phase demodulation process. The receiver concept is demonstrated at low frequencies and is found to improve the Spurious Free Dynamic Range (SFDR) of an experimental analog link by over 20dB. In order to extend the operation of the receiver to microwave frequencies, latencies arising from physical delays in the feedback path need to be dramatically reduced. To facilitate this, monolithic and hybrid versions of the receiver based on compact integration of InP photonic integrated circuits (PIC) with InP and SiGe electronic integrated circuits (EIC) have been developed at UCSB. In this work, we develop novel measurement techniques to characterize the linearity of the individual components of the PIC, namely, the semiconductor photodiodes and optical phase modulators. We then demonstrate the operation of the receiver in a high power analog link. The OPLL based receiver has a bandwidth of 1.5GHz. The link gain and shot-noise limited SFDR at 300MHz are -2dB and 125dB-Hz2/3, respectively. Further, optical sampling downconversion is demonstrated as a viable technique to increase the operating frequency of the receiver beyond the baseband range.

  19. Phase-Length Optical Phase-Locked-Loop Sensor (PLOPS)

    NASA Technical Reports Server (NTRS)

    Heyman, Joseph S.; Rogawski, Robert S.

    1988-01-01

    PLOPS system designed to provide high-resolution measurement of change in optical length from optical-system source to any optical reflector, including diffuse reflector. Serves as adjustable optical ruler, providing high resolution in measurements of small and large changes in distance to target. Use is broad and includes most measurement situations requiring information on length, vibration, and their derivatives. Applications include building dynamics, remote sensing of vibrations in such systems as turbine-based machinery, monitoring of structural dynamics, noncontacting sensing of surface contours, measurement of large strains as in earthquake monitoring, measurement of atmospheric dynamics and turbulence, high-resolution sensing of humidity, detection of surface acoustic waves by optical microscopy, and related areas.

  20. Nonadditive Mixed State Phases in Neutron Optics

    SciTech Connect

    Klepp, J.; Sponar, S.; Filipp, S.; Lettner, M.; Badurek, G.; Hasegawa, Y.

    2009-03-10

    In a neutron polarimetry experiment mixed neutron spin phases are determined. We consider evolutions leading to purely geometric, purely dynamical and combined phases. It is experimentally demonstrated that the sum of the geometric and dynamical phases--both obtained in separate measurements--is not equal to the associated total phase as obtained from a third measurement, unless the system is in a pure state. In this sense, mixed state phases are not additive.

  1. Phase dynamics in a Doppler broadened optically-pumped laser

    NASA Astrophysics Data System (ADS)

    Roldán, E.; de Valcárcel, G. J.; Vilaseca, R.; Silva, F.; Pujol, J.; Corbalán, R.; Laguarta, F.

    1989-11-01

    The dynamic behavior of the phase of the generated field in a Doppler-broadened optically-pumped far-infrared laser is theoretically investigated for the first time. The phase undergoes sudden jumps of approximately π radians, which allow to establish the actual symmetry of the main attractor in the phase space, explaining the heteroclynic character of the chaotic behavior observed in experiments.

  2. Optical Phased Array Using Guided Resonance with Backside Reflectors

    NASA Technical Reports Server (NTRS)

    Horie, Yu (Inventor); Arbabi, Amir (Inventor); Faraon, Andrei (Inventor)

    2016-01-01

    Methods and systems for controlling the phase of electromagnetic waves are disclosed. A device can consist of a guided resonance grating layer, a spacer, and a reflector. A plurality of devices, arranged in a grid pattern, can control the phase of reflected electromagnetic phase, through refractive index control. Carrier injection, temperature control, and optical beams can be applied to control the refractive index.

  3. Optical phased array using guided resonance with backside reflectors

    SciTech Connect

    Horie, Yu; Arbabi, Amir; Faraon, Andrei

    2016-11-01

    Methods and systems for controlling the phase of electromagnetic waves are disclosed. A device can consist of a guided resonance grating layer, a spacer, and a reflector. A plurality of devices, arranged in a grid pattern, can control the phase of reflected electromagnetic phase, through refractive index control. Carrier injection, temperature control, and optical beams can be applied to control the refractive index.

  4. Effects and correction of magneto-optic spatial light modulator phase errors in an optical correlator

    NASA Technical Reports Server (NTRS)

    Downie, John D.; Hine, Butler P.; Reid, Max B.

    1992-01-01

    The optical phase errors introduced into an optical correlator by the input and filter plane magnetooptic spatial light modulators have been studied. The magnitude of these phase errors is measured and characterized, their effects on the correlation results are evaluated, and a means of correction by a design modification of the binary phase-only optical-filter function is presented. The efficacy of the phase-correction technique is quantified and is found to restore the correlation characteristics to those obtained in the absence of errors, to a high degree. The phase errors of other correlator system elements are also discussed and treated in a similar fashion.

  5. Optical Phase Locking of Modelocked Lasers for Particle Accelerators

    SciTech Connect

    Plettner, T.; Sinha, S.; Wisdom, J.; Colby, E.R.; /SLAC

    2006-02-17

    Particle accelerators require precise phase control of the electric field through the entire accelerator structure. Thus a future laser driven particle accelerator will require optical synchronism between the high-peak power laser sources that power the accelerator. The precise laser architecture for a laser driven particle accelerator is not determined yet, however it is clear that the ability to phase-lock independent modelocked oscillators will be of crucial importance. We report the present status on our work to demonstrate long term phaselocking between two modelocked lasers to within one degree of optical phase and describe the optical synchronization techniques that we employ.

  6. Superfluid and insulating phases of fermion mixtures in optical lattices.

    PubMed

    Iskin, M; Sá de Melo, C A R

    2007-08-24

    The ground state phase diagram of fermion mixtures in optical lattices is analyzed as a function of interaction strength, fermion filling factor, and tunneling parameters. In addition to standard superfluid, phase-separated or coexisting superfluid -- excess-fermion phases found in homogeneous or harmonically trapped systems, fermions in optical lattices have several insulating phases, including a molecular Bose-Mott insulator (BMI), a Fermi-Pauli (band) insulator (FPI), a phase-separated BMI-FPI mixture or a Bose-Fermi checkerboard (BFC). The molecular BMI phase is the fermion mixture counterpart of the atomic BMI found in atomic Bose systems, the BFC or BMI-FPI phases exist in Bose-Fermi mixtures, and lastly the FPI phase is particular to the Fermi nature of the constituent atoms of the mixture.

  7. Optical Mode Control by Geometric Phase in Quasicrystal Metasurface

    NASA Astrophysics Data System (ADS)

    Yulevich, Igor; Maguid, Elhanan; Shitrit, Nir; Veksler, Dekel; Kleiner, Vladimir; Hasman, Erez

    2015-11-01

    We report on the observation of optical spin-controlled modes from a quasicrystalline metasurface as a result of an aperiodic geometric phase induced by anisotropic subwavelength structure. When geometric phase defects are introduced in the aperiodic structured surface, the modes exhibit polarization helicity dependence resulting in the optical spin-Hall effect. The radiative thermal dispersion bands from a quasicrystal structure are studied where the observed bands arise from the optical spin-orbit interaction induced by the aperiodic space-variant orientations of anisotropic antennas. The optical spin-flip behavior of the revealed modes that arise from the geometric phase pickup is experimentally observed within the visible spectrum by measuring the spin-projected diffraction patterns. The introduced ability to manipulate the light-matter interaction of quasicrystals in a spin-dependent manner provides the route for molding light via spin-optical aperiodic artificial planar surfaces.

  8. Arbitrarily modulated beam for phase-only optical encryption

    NASA Astrophysics Data System (ADS)

    Chen, Wen; Chen, Xudong

    2014-10-01

    Optical encryption has attracted more and more attention recently due to its remarkable advantages, such as parallel processing and multiple-dimensional characteristics. In this paper, we propose to apply an arbitrarily modulated beam for phase-only optical encryption. In optical security systems, the plane wave is commonly used for the illumination, and unauthorized receivers may easily obtain or estimate the information related to the illumination beam. The proposed strategy with an arbitrarily modulated illumination beam can effectively enhance system security, since a beam modulation pattern (such as a pinhole-array pattern or a random phase-only pattern) can be considered an additional security key. The phase-only optical encryption is taken as an example for illustrating the validity of the proposed method; however it could be straightforward to apply the proposed strategy to other optical security systems.

  9. Free space optical communication link using a silicon photonic optical phased array

    NASA Astrophysics Data System (ADS)

    Rabinovich, William S.; Goetz, Peter G.; Pruessner, Marcel; Mahon, Rita; Ferraro, Mike S.; Park, Doe; Fleet, Erin; DePrenger, Michael J.

    2015-03-01

    Many components for free space optical communication systems have shrunken in size over the last decade. However, the steering systems have remained large and power hungry. Non-mechanical beam steering offers a path to reducing the size of these systems. Optical phased arrays can allow integrated beam steering elements. One of the most important aspects of an optical phased array technology is its scalability to a large number of elements. Silicon photonics can potentially offer this scalability using CMOS foundry techniques. In this paper a small-scale silicon photonic optical phased array is demonstrated for both the transmitter and receiver functions in a free space optical link. The device using an array of thermo-optically controlled waveguide phase shifters and demonstrates one-dimensional steering with a single control electrode. Transmission of a digitized video data stream over the link is shown.

  10. Phase-sensitive optical coherence reflectometer with differential phase-shift keying of probe pulses

    SciTech Connect

    Alekseev, A E; Vdovenko, V S; Sergachev, I A; Simikin, D E; Gorshkov, B G; Potapov, V T

    2014-10-31

    We report a new method for reconstructing the signal shape of the external dynamic perturbations along the entire length of the fibre of an optical coherence reflectometer. The method proposed is based on differential phase-shift keying of a probe pulse and demodulation of scattered light by the phase diversity technique. Possibilities of the method are demonstrated experimentally. (fibre-optic sensors)

  11. Balanced optical-microwave phase detectors for optoelectronic phase-locked loops.

    PubMed

    Kim, J; Kärtner, F X; Ludwig, F

    2006-12-15

    A balanced optical-microwave phase detector for the extraction of low-jitter, high-power, and drift-free microwave signals from optical pulse trains is presented. The phase detection is based on electro-optic sampling with a differentially biased Sagnac loop. Because the timing information is transferred in the optical domain, the regenerated microwave signal is robust against drifts and photodetector nonlinearities. In a first experimental implementation, 3 fs in-loop relative timing jitter (integrated from 1 Hz to 10 MHz) between a 44 MHz optical pulse train and a 10.225 GHz microwave signal is demonstrated.

  12. Sixport technique for phase measurement of guided optical fields

    NASA Astrophysics Data System (ADS)

    Molina-Fernandez, I.; Ortega-Moñux, A.; Halir, R.; Wangüemert-Pérez, J. G.; Perez-Lara, P.

    2010-04-01

    This paper introduces the sixport technique for precise amplitude and phase measurement of guided optical fields. The main theoretical advances in this topic are reviewed and recent experimental measurements of a Silicon on Insulator sixport PLC reflectometer are presented.

  13. Coherent Nonlinear Optical Response Spatial Self-Phase Modulation in MoSe2 Nano-Sheets

    PubMed Central

    Wang, Wenhui; Wu, Yanling; Wu, Qiong; Hua, Jiaojiao; Zhao, Jimin

    2016-01-01

    Two-dimensional (2D) transition metal dichalcogenides (TMDs) are drawing increasing interest due to their relatively high carrier mobilities, valley pseudospins, and gapped electronic structures, which all indicate interesting nonlinear optical properties of these 2D materials. However, such nonlinear optical properties are so far less investigated and their correlation with the electronic structure of the material is rarely probed. In this work, we have systematically investigated the spatial self-phase modulation (SSPM) of MoSe2 flakes in a suspension form, which is a coherent third-order nonlinear optical effect. The nonlinear susceptibility χ(3) and its wavelength-dependence are measured, yielding a value of 1.1 × 10−9 e.s.u. (SI: 1.53 × 10−17 m2/V2) at 532 nm laser excitation for effective one-layer MoSe2. PMID:26916605

  14. Optically-Based Diagnostics for Gas-Phase Laser Development

    DTIC Science & Technology

    2010-08-01

    Phase Laser Development Acknowledgement of Support and Disclaimer This material is based upon work supported by Air Force Office of Scientific...00-2010 4. TITLE AND SUBTITLE Optically-Based Diagnostics for Gas-Phase Laser Development 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...Sciences Inc. Role of Optical Diagnostics in High Energy Gas Laser Development  Chemically rich, energetic, reacting flow with competing phenomena

  15. Characterization of an optical phased array for use in free space optical communication antennas

    NASA Astrophysics Data System (ADS)

    Anisimov, Igor; Harris, Scott R.; Stadler, Brian K.

    2008-08-01

    Liquid Crystal Optical Phased Arrays (LCOPA) capable of steering optical beams over large angles require very large number of individually addressable electrodes that can be reduced by grouping the electrodes into periodic pattern to modulate phase profiles with consequent stepwise phase corrections made by an additional LCOPA. Such phase ramp-corrector configuration allows for reductions in the total number of the addressed electrodes and results in lower costs of development and manufacturing of LCOPA devices. Characterization of the device made by Teledyne Scientific for an experimental RF/EO antenna has been accomplished. Issues concerning optical beam steering efficiency, incident angle dependency and transparent electrodes alignment were investigated.

  16. Method of optical coherence tomography with parallel depth-resolved signal reception and fibre-optic phase modulators

    SciTech Connect

    Morozov, A N; Turchin, I V

    2013-12-31

    The method of optical coherence tomography with the scheme of parallel reception of the interference signal (P-OCT) is developed on the basis of spatial paralleling of the reference wave by means of a phase diffraction grating producing the appropriate time delay in the Mach–Zehnder interferometer. The absence of mechanical variation of the optical path difference in the interferometer essentially reduces the time required for 2D imaging of the object internal structure, as compared to the classical OCT that uses the time-domain method of the image construction, the sensitivity and the dynamic range being comparable in both approaches. For the resulting field of the interfering object and reference waves an analytical expression is derived that allows the calculation of the autocorrelation function in the plane of photodetectors. For the first time a method of linear phase modulation by 2π is proposed for P-OCT systems, which allows the use of compact high-frequency (a few hundred kHz) piezoelectric cell-based modulators. For the demonstration of the P-OCT method an experimental setup was created, using which the images of the inner structure of biological objects at the depth up to 1 mm with the axial spatial resolution of 12 μm were obtained. (optical coherence tomography)

  17. Smartphone-based platform optical setup measuring π/256 optical phase difference in an interference process.

    PubMed

    Hussain, Iftak; Nath, Pabitra

    2015-06-20

    Utilizing the camera of a smartphone and simple laboratory optical components, we demonstrate an optical technique that measures an optical phase difference (OPD) of π/256 in an interference process. We develop a compact optical setup for viewing circular interference fringe patterns through the camera of the smartphone. By introducing OPD between the interfering beams, variation in fringe pattern is recorded using the smartphone camera. We envision that the proposed optical setup could emerge as an ultrasensitive optical tool for measurement of inclination of a given surface.

  18. Application of optical diffraction method in designing phase plates

    NASA Astrophysics Data System (ADS)

    Lei, Ze-Min; Sun, Xiao-Yan; Lv, Feng-Nian; Zhang, Zhen; Lu, Xing-Qiang

    2016-11-01

    Continuous phase plate (CPP), which has a function of beam shaping in laser systems, is one kind of important diffractive optics. Based on the Fourier transform of the Gerchberg-Saxton (G-S) algorithm for designing CPP, we proposed an optical diffraction method according to the real system conditions. A thin lens can complete the Fourier transform of the input signal and the inverse propagation of light can be implemented in a program. Using both of the two functions can realize the iteration process to calculate the near-field distribution of light and the far-field repeatedly, which is similar to the G-S algorithm. The results show that using the optical diffraction method can design a CPP for a complicated laser system, and make the CPP have abilities of beam shaping and phase compensation for the phase aberration of the system. The method can improve the adaptation of the phase plate in systems with phase aberrations.

  19. Optical phased arrays with evanescently-coupled antennas

    DOEpatents

    Sun, Jie; Watts, Michael R; Yaacobi, Ami; Timurdogan, Erman

    2015-03-24

    An optical phased array formed of a large number of nanophotonic antenna elements can be used to project complex images into the far field. These nanophotonic phased arrays, including the nanophotonic antenna elements and waveguides, can be formed on a single chip of silicon using complementary metal-oxide-semiconductor (CMOS) processes. Directional couplers evanescently couple light from the waveguides to the nanophotonic antenna elements, which emit the light as beams with phases and amplitudes selected so that the emitted beams interfere in the far field to produce the desired pattern. In some cases, each antenna in the phased array may be optically coupled to a corresponding variable delay line, such as a thermo-optically tuned waveguide or a liquid-filled cell, which can be used to vary the phase of the antenna's output (and the resulting far-field interference pattern).

  20. Fourier phase in Fourier-domain optical coherence tomography.

    PubMed

    Uttam, Shikhar; Liu, Yang

    2015-12-01

    Phase of an electromagnetic wave propagating through a sample-of-interest is well understood in the context of quantitative phase imaging in transmission-mode microscopy. In the past decade, Fourier-domain optical coherence tomography has been used to extend quantitative phase imaging to the reflection-mode. Unlike transmission-mode electromagnetic phase, however, the origin and characteristics of reflection-mode Fourier phase are poorly understood, especially in samples with a slowly varying refractive index. In this paper, the general theory of Fourier phase from first principles is presented, and it is shown that Fourier phase is a joint estimate of subresolution offset and mean spatial frequency of the coherence-gated sample refractive index. It is also shown that both spectral-domain phase microscopy and depth-resolved spatial-domain low-coherence quantitative phase microscopy are special cases of this general theory. Analytical expressions are provided for both, and simulations are presented to explain and support the theoretical results. These results are further used to show how Fourier phase allows the estimation of an axial mean spatial frequency profile of the sample, along with depth-resolved characterization of localized optical density change and sample heterogeneity. Finally, a Fourier phase-based explanation of Doppler optical coherence tomography is also provided.

  1. Fourier phase in Fourier-domain optical coherence tomography

    PubMed Central

    Uttam, Shikhar; Liu, Yang

    2015-01-01

    Phase of an electromagnetic wave propagating through a sample-of-interest is well understood in the context of quantitative phase imaging in transmission-mode microscopy. In the past decade, Fourier-domain optical coherence tomography has been used to extend quantitative phase imaging to the reflection-mode. Unlike transmission-mode electromagnetic phase, however, the origin and characteristics of reflection-mode Fourier phase are poorly understood, especially in samples with a slowly varying refractive index. In this paper, the general theory of Fourier phase from first principles is presented, and it is shown that Fourier phase is a joint estimate of subresolution offset and mean spatial frequency of the coherence-gated sample refractive index. It is also shown that both spectral-domain phase microscopy and depth-resolved spatial-domain low-coherence quantitative phase microscopy are special cases of this general theory. Analytical expressions are provided for both, and simulations are presented to explain and support the theoretical results. These results are further used to show how Fourier phase allows the estimation of an axial mean spatial frequency profile of the sample, along with depth-resolved characterization of localized optical density change and sample heterogeneity. Finally, a Fourier phase-based explanation of Doppler optical coherence tomography is also provided. PMID:26831383

  2. Experimental demonstration of all optical XOR and XNOR gates for differential phase modulated data

    NASA Astrophysics Data System (ADS)

    Kakarla, Ravikiran; Venkitesh, Deepa

    2014-05-01

    All optical logic gates play a key role in implementing an optically transparent network where the node functionalities are performed in the optical domain to reduce latency and power consumption. In this paper we present the experimental demonstration and details of optimization of all optical XOR/ XNOR gate using four-wave mixing (FWM) in Semiconductor Optical Amplifier (SOA) for 10 Gbps Differential Phase Shift Keyed (DPSK) data. Two DPSK modulated signals at carrier frequencies ω1 and ω2, phases ϕ1and ϕ2and a continuous wave pump at frequency ωCW and phase ϕCW are allowed to undergo FWM in a non-linear SOA to generate additional frequency components. The phase of the generated FWM idler corresponding to the frequency ω1+ ω2-ωCW given by ϕ1+ ϕ2- CW corresponds to the XOR operation in DPSK format. Light from a DFB and tunable laser source (TLS) are combined and phase-modulated using a pseudo-random bit sequence. The bit sequences in the two carrier wavelengths are separated in time by propagating through a sufficient length of SMF; the data is combined with a CW pump from a tunable laser and allowed to undergo non-degenerate FWM in a nonlinear SOA. The relative spacing between the pump and the signal wavelengths and their polarization states are optimized to yield maximum conversion efficiency in the desired idler. The XOR output is further propagated through a delay-line interferometer (DLI) to obtain XOR and XNOR outputs in the two ports of the DLI, in the OOK format. Extinction ratio and Contrast ratio of better than 7.2 dB and 10.6 dB respectively for the XNOR gate and 6.8 dB and 7.5 dB for the XOR gaterespectively.

  3. Synthesis, X-ray crystal structure, optical properties and DFT studies of a new 2D layered iodide bridged Pb(II) coordination polymer with 2,3-bis(2-pyridyl)pyrazine

    SciTech Connect

    Saghatforoush, Lotfali Bakhtiari, Akbar; Gheleji, Hojjat

    2015-01-15

    The synthesis of two dimensional (2D) coordination polymer [Pb{sub 2}(µ-I){sub 2}(µ-dpp-N,N,N,N)(µ-dpp-N,N)I{sub 2}]{sub n} (dpp=2,3-bis(2-pyridyl)pyrazine) is reported. As determined by X-ray diffraction of a twinned crystal, the dpp ligand simultaneously adopts a bis–bidentate and bis–monodentate coordination mode in the crystal structure of compound. The electronic band structure along with density of states (DOS) calculated by the DFT method indicates that the compound is an indirect band gap semiconductor. According to the DFT calculations, the observed emission of the compound at 600 nm in solid phase could be attributed to arise from an excited LLCT state (dpp-π{sup ⁎} [C-2p and N-2p states, CBs] to I-6p state [VBs]). The linear optical properties of the compound are also calculated by DFT method. The structure of the compound in solution phase is discussed based on the measured {sup 1}H NMR and fluorescence spectra in DMSO. TGA studies indicate that the compound is thermally stable up to 210 °C. - Graphical abstract: The synthesis, crystal structure and emission spectra of [Pb{sub 2}(µ-I){sub 2}(µ-dpp-N,N,N,N)(µ-dpp-N,N)I{sub 2}]{sub n} is presented. The electronic band structure and linear optical properties of the compound are calculated by the DFT method. - Highlights: • Two dimensional [Pb{sub 2}(µ-I){sub 2}(µ-dpp-N,N,N,N)(µ-dpp-N,N)I{sub 2}]{sub n} has been prepared. • The structure of the compound is determined by XRD of a twinned crystal. • DFT calculations indicate that the compound is an indirect band gap semiconductor. • As shown by DFT calculations, the emission band of the compound is LLCT. • Solution phase structure of compound is explored by {sup 1}H NMR and emission spectra.

  4. Optical pump phase locking to a carrier wave extracted from phase-conjugated twin waves for phase-sensitive optical amplifier repeaters.

    PubMed

    Okamura, Yasuhiro; Abe, Masashi; Kondo, Kotaro; Ohmichi, Yuya; Kazama, Takushi; Umeki, Takeshi; Koga, Masafumi; Takada, Atsushi

    2016-11-14

    In this paper, an optical phase-locked loop assisted by sum-frequency and second-harmonic generation (SS-OPLL) for frequency nondegenerate optical parametric phase-sensitive amplifier repeaters is experimentally demonstrated. First, theoretical derivations show that carrier extraction from phase-conjugated twin waves (PCTWs) and reference light generation are achieved by sum-frequency generation; therefore, the SS-OPLL circuit enables optical phase locking between PCTWs and a pump wave by a simple architecture based on a balanced OPLL. Then, optical phase locking between 20-Gbit/s quadrature phase-shift keying PCTWs and an individual pump source is experimentally demonstrated. Experimental results indicate that phase errors were reduced during the SS-OPLL operation.

  5. Phase Matching Using the Linear Electro-Optic Effect

    NASA Astrophysics Data System (ADS)

    Cui, Zijian; Liu, Dean; Miao, Jie; Yang, Aihua; Zhu, Jianqiang

    2017-01-01

    Phase matching is a necessary condition for achieving high-efficiency optical-frequency conversion. To date, practical means of accomplishing phase matching in homogeneous crystals remain limited, despite considerable efforts. Herein, we report a new class of methods aimed at achieving quasiperfect phase matching, based on controllable birefringence produced via the linear electro-optic effect, termed "voltage-tuning phase matching." The wave vectors of the induced polarization and the generated fields can be matched and maintained along the direction of propagation by introducing an external electric field. We analyze the validity and feasibility of this method theoretically and demonstrate it experimentally by applying the linear electro-optic effect and fourth-harmonic generation simultaneously in a partially deuterated KH2PO4 crystal. Quasiperfect phase matching is achieved systematically over a temperature range of the initial phase-matching temperature ±2 ° C . Moreover, this method can overcome the limitation of the birefringence in traditional technologies and provides new functionalities for conventional nonlinear materials as well as low-birefringence and isotropic materials. This technology may significantly impact the study of optical-frequency conversion and has promise for a broad range of applications in nonlinear optics.

  6. Constant volume gas cell optical phase-shifter

    DOEpatents

    Phillion, Donald W.

    2002-01-01

    A constant volume gas cell optical phase-shifter, particularly applicable for phase-shifting interferometry, contains a sealed volume of atmospheric gas at a pressure somewhat different than atmospheric. An optical window is present at each end of the cell, and as the length of the cell is changed, the optical path length of a laser beam traversing the cell changes. The cell comprises movable coaxial tubes with seals and a volume equalizing opening. Because the cell is constant volume, the pressure, temperature, and density of the contained gas do not change as the cell changes length. This produces an exactly linear relationship between the change in the length of the gas cell and the change in optical phase of the laser beam traversing it. Because the refractive index difference between the gas inside and the atmosphere outside is very much the same, a large motion must be made to change the optical phase by the small fraction of a wavelength that is required by phase-shifting interferometry for its phase step. This motion can be made to great fractional accuracy.

  7. Demonstration of optical steganography transmission using temporal phase coded optical signals with spectral notch filtering.

    PubMed

    Hong, Xuezhi; Wang, Dawei; Xu, Lei; He, Sailing

    2010-06-07

    A novel approach is proposed and experimentally demonstrated for optical steganography transmission in WDM networks using temporal phase coded optical signals with spectral notch filtering. A temporal phase coded stealth channel is temporally and spectrally overlaid onto a public WDM channel. Direct detection of the public channel is achieved in the presence of the stealth channel. The interference from the public channel is suppressed by spectral notching before the detection of the optical stealth signal. The approach is shown to have good compatibility and robustness to the existing WDM network for optical steganography transmission.

  8. 10-Mbps electro-optic resonant phase modulator

    NASA Technical Reports Server (NTRS)

    Robinson, D. L.; Chen, Chien-Chung; Hemmati, Hamid

    1993-01-01

    A resonant cavity electro-optic phase modulator has been designed and implemented to operate at a data rate of 10 Mbps. The modulator consists of an electro-optic crystal located in a highly resonant cavity. The cavity is electro-optically switched on and off resonance, and the phase dispersion near the cavity resonance provides the output phase modulation. The performance of the modulator was measured by first heterodyne-detecting the signal to an intermediate frequency and then measuring the spectral characteristics using an rf spectrum analyzer. The measured phase shift is shown to be in good agreement with the theoretical predictions. Further theoretical analysis shows that the design of the modulator can be scaled to operate at 100 Mbps.

  9. Scattering phase function: the step-child of ocean optics

    NASA Astrophysics Data System (ADS)

    Piskozub, Jacek; Freda, Wlodzimierz

    2013-04-01

    What are inherent optical properties? The answer seems simple: absorption and scattering. Actually, this is the correct answer but only if one means by them the underlying optical processes. If the intended meaning is "absorption and scattering coefficients" the answer is wrong. Wrong because unlike absorption, scattering cannot be described by a single scalar. Scattering has angular distribution which normalized version is called the phase function. Phase functions were never ignored but for several decades they were treated as the step-child of ocean optics: an average of three single wavelenght measurements of the San Diego harbor were used in radiative transfer calculations and when more variability was needed analytical phase functions created for diffuse galactic light were utilized. Only since about 2000, real progress started. Realistic analytical phase functions were created by Haltrin as well as by Fournier and Forand. New instruments were starting to be built. Two years later Mobley and colleges proposed a parametrization of Fournier-Forand functions using backscattering coefficients. We show using Monte Carlo radiative transfer code that backscattering coefficient is not the only factor ruling the phase function shape. Reflectivity values calculated using "realistic" phase functions with identical backscattering ratios can differ by up to 10%. This is the motivation for proposing a new phase function parametrization, an improved version of one we have published in 2007. This spectral parametrization is based on Baltic phase function measurements in four wavelengths. The parameter used to choose the correct Fournier-Forand function is absorption. At this moment this is only a regional parametrization but with more data it can be improved to become a universal one. We challenge ocean optics researchers to use their measured phase function data to verify and improve our method. It is high time phase functions stopped to be treated as the step-child of

  10. Phase retrieval encryption in an enhanced optical interference by key phase constraint.

    PubMed

    Shi, Xiaoyan; Chen, Ziyang; Zhao, Daomu; Mao, Haidan; Chen, Linfei

    2015-04-10

    In this paper, we demonstrate a security system by using optical interference and phase retrieval algorithm (PRA) techniques. The modified PRA is proposed to encode the target image into random phase distribution. Optical and digital methods can be used for decryption. By using this method, silhouette elimination is realized. In addition, due to this simplified system design, the iterative rate is improved and the optical decryption realization is easier. Validity and performance of the proposed system are demonstrated by means of numerical simulations. The system encryption capacity as to both binary and gray images is numerically investigated. Then, the decryption procedure is demonstrated by optical experiment means and the decryption result is given.

  11. Phase space analysis in anisotropic optical systems

    NASA Technical Reports Server (NTRS)

    Rivera, Ana Leonor; Chumakov, Sergey M.; Wolf, Kurt Bernardo

    1995-01-01

    From the minimal action principle follows the Hamilton equations of evolution for geometric optical rays in anisotropic media. As in classical mechanics of velocity-dependent potentials, the velocity and the canonical momentum are not parallel, but differ by an anisotropy vector potential, similar to that of linear electromagnetism. Descartes' well known diagram for refraction is generalized and a factorization theorem holds for interfaces between two anisotropic media.

  12. Phase-Sensitive Quantum Optical Sensor

    DTIC Science & Technology

    2009-12-10

    quantum interference pattern in the form of a dip [12]. Since the photon -counting detectors are slow, compared with the coherence time of down-converted...assumption carries when using Fock - state and NOON- state light in practical quantum interferometry. Optical dispersion is a significant contributor to...measurements. We examined in detail a number of different one- and two- photon input states , including Fock , dual Fock , N00N states , and

  13. Combination of a 2-D acousto-optic deflector with laser amplifier for efficient scanning of a Q-switched ND:YAG laser

    NASA Astrophysics Data System (ADS)

    Maák, P.; Jakab, L.; Richter, P. I.; Brignon, A.; Huignard, J.-P.

    2000-03-01

    A two-dimensional acousto-optic deflector has been combined with a large angular acceptance, laser diode-pumped Nd:YAG optical amplifier in order to obtain a scanning system with high angular resolution and with high and uniform optical transmission. Experiments have been carried out in order to optimize the set-up for intensity distribution and optical losses. The combination of newly developed nonlinear and active optical elements provides a relatively uniform intensity distribution over the scanned region corresponding to 300×300 discrete points in the back focal plane of a Fourier lens, at laser pulse energy levels of 1-5 mJ.

  14. Phased array antenna beamforming using optical processor

    NASA Technical Reports Server (NTRS)

    Anderson, L. P.; Boldissar, F.; Chang, D. C. D.

    1991-01-01

    The feasibility of optical processor based beamforming for microwave array antennas is investigated. The primary focus is on systems utilizing the 20/30 GHz communications band and a transmit configuration exclusively to serve this band. A mathematical model is developed for computation of candidate design configurations. The model is capable of determination of the necessary design parameters required for spatial aspects of the microwave 'footprint' (beam) formation. Computed example beams transmitted from geosynchronous orbit are presented to demonstrate network capabilities. The effect of the processor on the output microwave signal to noise quality at the antenna interface is also considered.

  15. Condensate fraction in a 2D Bose gas measured across the Mott-insulator transition.

    PubMed

    Spielman, I B; Phillips, W D; Porto, J V

    2008-03-28

    We realize a single-band 2D Bose-Hubbard system with Rb atoms in an optical lattice and measure the condensate fraction as a function of lattice depth, crossing from the superfluid to the Mott-insulating phase. We quantitatively identify the location of the superfluid to normal transition by observing when the condensed fraction vanishes. Our measurement agrees with recent quantum Monte Carlo calculations for a finite-sized 2D system to within experimental uncertainty.

  16. Phase-lock-loop application for fiber optic receiver

    NASA Technical Reports Server (NTRS)

    Ruggles, Stephen L.; Wills, Robert W.

    1991-01-01

    Phase-locked loop circuits are frequently employed in communication systems. In recent years, digital phase-locked loop circuits were utilized in optical communications systems. In an optical transceiver system, the digital phase-locked loop circuit is connected to the output of the receiver to extract a clock signal from the received coded data (NRZ, Bi-Phase, or Manchester). The clock signal is then used to reconstruct or recover the original data from the coded data. A theoretical approach to the design of a digital phase-locked loop circuit operation at 1 and 50 MHz is described. Hardware implementation of a breadboard design to function at 1 MHz and a printed-circuit board designed to function at 50 MHz were assembled using emitter coupled logic (ECL) to verify experimentally the theoretical design.

  17. Two-dimensional beam steering using a thermo-optic silicon photonic optical phased array

    NASA Astrophysics Data System (ADS)

    Rabinovich, William S.; Goetz, Peter G.; Pruessner, Marcel W.; Mahon, Rita; Ferraro, Mike S.; Park, Doe; Fleet, Erin; DePrenger, Michael J.

    2016-11-01

    Many components for free-space optical (FSO) communication systems have shrunken in size over the last decade. However, the steering systems have remained large and power hungry. Nonmechanical beam steering offers a path to reducing the size of these systems. Optical phased arrays can allow integrated beam steering elements. One of the most important aspects of an optical phased array technology is its scalability to a large number of elements. Silicon photonics can potentially offer this scalability using CMOS foundry techniques. A phased array that can steer in two dimensions using the thermo-optic effect is demonstrated. No wavelength tuning of the input laser is needed and the design allows a simple control system with only two inputs. A benchtop FSO link with the phased array in both transmit and receive mode is demonstrated.

  18. Quantitative phase measurement for wafer-level optics

    NASA Astrophysics Data System (ADS)

    Qu, Weijuan; Wen, Yongfu; Wang, Zhaomin; Yang, Fang; Huang, Lei; Zuo, Chao

    2015-07-01

    Wafer-level-optics now is widely used in smart phone camera, mobile video conferencing or in medical equipment that require tiny cameras. Extracting quantitative phase information has received increased interest in order to quantify the quality of manufactured wafer-level-optics, detect defective devices before packaging, and provide feedback for manufacturing process control, all at the wafer-level for high-throughput microfabrication. We demonstrate two phase imaging methods, digital holographic microscopy (DHM) and Transport-of-Intensity Equation (TIE) to measure the phase of the wafer-level lenses. DHM is a laser-based interferometric method based on interference of two wavefronts. It can perform a phase measurement in a single shot. While a minimum of two measurements of the spatial intensity of the optical wave in closely spaced planes perpendicular to the direction of propagation are needed to do the direct phase retrieval by solving a second-order differential equation, i.e., with a non-iterative deterministic algorithm from intensity measurements using the Transport-of-Intensity Equation (TIE). But TIE is a non-interferometric method, thus can be applied to partial-coherence light. We demonstrated the capability and disability for the two phase measurement methods for wafer-level optics inspection.

  19. Phase noise reduction of a semiconductor laser in a composite optical phase-locked loop

    NASA Astrophysics Data System (ADS)

    Satyan, Naresh; Sendowski, Jacob; Vasilyev, Arseny; Rakuljic, George; Yariv, Amnon

    2010-12-01

    The bandwidth and residual phase noise of optical phase-locked loops (OPLLs) using semiconductor lasers are typically constrained by the nonuniform frequency modulation response of the laser, limiting their usefulness in a number of applications. It is shown in this work that additional feedback control using an optical phase modulator improves the coherence between the master and slave lasers in the OPLL by achieving bandwidths determined only by the propagation delay in the loop. A phase noise reduction by more than a factor of two is demonstrated in a proof-of-concept experiment using a commercial distributed feedback semiconductor laser.

  20. Phased-array optical whispering gallery mode modulation and method

    NASA Technical Reports Server (NTRS)

    Strekalov, Dmitry V. (Inventor)

    2009-01-01

    A whispering gallery mode (WGM) resonator device and method capable of filtering sidebands of optical modulators are provided. The method includes providing an optical resonator adapted to support whispering gallery modes and forming a first field and a second field from a first location and a second location, respectively, at the circumference of the optical resonator and being separated by an arc angle, .alpha.. The method includes adjusting relative phase between the first field and the second field in accordance to a differential phase, .beta., and combining the first and the second fields into an output. Particular selection of the arc angle, .alpha., and the differential phase, .beta., can determine the function of the output.

  1. Optical properties of single-layer and bilayer arsenene phases

    NASA Astrophysics Data System (ADS)

    Kecik, D.; Durgun, E.; Ciraci, S.

    2016-11-01

    An extensive investigation of the optical properties of single-layer buckled and washboard arsenene and their bilayers was performed, starting from layered three-dimensional crystalline phase of arsenic using density functional and many-body perturbation theories combined with random phase approximation. Electron-hole interactions were taken into account by solving the Bethe-Salpeter equation, suggesting first bound exciton energies on the order of 0.7 eV. Thus, many-body effects were found to be crucial for altering the optical properties of arsenene. The light absorption of single-layer and bilayer arsenene structures in general falls within the visible-ultraviolet spectral regime. Moreover, directional anisotropy, varying the number of layers, and applying homogeneous or uniaxial in-plane tensile strain were found to modify the optical properties of two-dimensional arsenene phases, which could be useful for diverse photovoltaic and optoelectronic applications.

  2. Highly crystalline 2D superconductors

    NASA Astrophysics Data System (ADS)

    Saito, Yu; Nojima, Tsutomu; Iwasa, Yoshihiro

    2016-12-01

    Recent advances in materials fabrication have enabled the manufacturing of ordered 2D electron systems, such as heterogeneous interfaces, atomic layers grown by molecular beam epitaxy, exfoliated thin flakes and field-effect devices. These 2D electron systems are highly crystalline, and some of them, despite their single-layer thickness, exhibit a sheet resistance more than an order of magnitude lower than that of conventional amorphous or granular thin films. In this Review, we explore recent developments in the field of highly crystalline 2D superconductors and highlight the unprecedented physical properties of these systems. In particular, we explore the quantum metallic state (or possible metallic ground state), the quantum Griffiths phase observed in out-of-plane magnetic fields and the superconducting state maintained in anomalously large in-plane magnetic fields. These phenomena are examined in the context of weakened disorder and/or broken spatial inversion symmetry. We conclude with a discussion of how these unconventional properties make highly crystalline 2D systems promising platforms for the exploration of new quantum physics and high-temperature superconductors.

  3. Optical near-field phase singularities produced by microstructures

    NASA Astrophysics Data System (ADS)

    Nesci, Antonello; Daendliker, Rene; Salt, Martin; Herzig, Hans Peter

    2001-12-01

    An electromagnetic field is characterized by an amplitude, a phase and a polarization state. In this paper, we intend to gain an understanding of the interaction of light with microstructures in order to determine their optical properties. Measurements of the amplitude and phase close to gratings are presented using a heterodyne scanning probe microscope. We discuss some basic properties of phase distributions. Indeed, coherent light diffracted by microstructures can give birth to phase dislocations, also called phase singularities. Phase singularities are isolated points where the amplitude of the field is zero. The position of these special points can lead us to information about the structure (shape, surface defects, etc), by comparing with rigorous diffraction calculation using e.g. the Fourier Modal Method (FMM). We present high-resolution measurements of such phase singularities and compare them with theoretical results. Polarization effects have been studied in order to understand the field conversion by the fiber tip.

  4. Phase-coherent all-optical frequency division by three

    SciTech Connect

    Lee, Dong-Hoon; Klein, Marvin E.; Meyn, Jan-Peter; Wallenstein, Richard; Gross, Petra; Boller, Klaus-Jochen

    2003-01-01

    The properties of all-optical phase-coherent frequency division by 3, based on a self-phase-locked continuous-wave (cw) optical parametric oscillator (OPO), are investigated theoretically and experimentally. The frequency to be divided is provided by a diode laser master-oscillator power-amplifier system operated at a wavelength of 812 nm and used as the pump source of the OPO. Optical self-phase-locking of the OPO signal and idler waves is achieved by mutual injection locking of the signal wave and the intracavity frequency-doubled idler wave. The OPO process and the second-harmonic generation of the idler wave are simultaneously phase matched through quasi-phase-matching using two periodically poled sections of different period manufactured within the same LiNbO{sub 3} crystal. An optical self-phase-locking range of up to 1 MHz is experimentally observed. The phase coherence of frequency division by three is measured via the phase stability of an interference pattern formed by the input and output waves of the OPO. The fractional frequency instability of the divider is measured to be smaller than 7.6x10{sup -14} for a measurement time of 10 s (resolution limited). The self-phase-locking characteristics of the cw OPO are theoretically investigated by analytically solving the coupled field equations in the steady-state regime. For the experimental parameters of the OPO, the calculations predict a locking range of 1.3 MHz and a fractional frequency instability of 1.6x10{sup -15}, in good agreement with the experimental results.

  5. Phase singularity of surface plasmon polaritons generated by optical vortices.

    PubMed

    Tan, P S; Yuan, G H; Wang, Q; Zhang, N; Zhang, D H; Yuan, X-C

    2011-08-15

    We demonstrate an experimental result that shows the phase singularity of surface plasmon waves generated by the direct transform of optical vortices at normal incidence focused on a structureless metal surface. The near-field two-dimensional intensity distribution near the focal plane is experimentally examined by using near-field scanning optical microscopy and shows a good agreement with the finite-difference time-domain simulation result. The experimental realization demonstrates a potential of the proposed excitation scheme to be reconfigured locally with advantages over structures milled into optically thick metallic films for plasmonics applications involving plasmonic vortices.

  6. Speckle Reduction for LIDAR Using Optical Phase Conjugation

    SciTech Connect

    Bowers, M W; Kecy, C; Little, L; Cooke, J; Benterou, J; Boyd, R; Birks, T

    2001-02-26

    Remote detection of chemicals using LIDAR (Light Detection and Ranging) utilizing DIAL (Differential Absorption LIDAR) is now a standard detection technique for both military and civilian activities. We have developed a novel nonlinear optical phase conjugation system that can reduce the effects of speckle noise and atmospheric turbulence on DIAL remote detection systems. We have shown numerically and experimentally that it is possible to increase the signal-to-noise (S/N) ratio for LIDAR systems under certain conditions using optical phase conjugation. This increase in S/N can result in more accurate detection of chemical effluents while simultaneously reducing the time necessary to acquire this information.

  7. Optically controlled phased-array technology for space communication systems

    NASA Technical Reports Server (NTRS)

    Kunath, Richard R.; Bhasin, Kul B.

    1988-01-01

    Using MMICs in phased-array applications above 20 GHz requires complex RF and control signal distribution systems. Conventional waveguide, coaxial cable, and microstrip methods are undesirable due to their high weight, high loss, limited mechanical flexibility and large volume. An attractive alternative to these transmission media, for RF and control signal distribution in MMIC phased-array antennas, is optical fiber. Presented are potential system architectures and their associated characteristics. The status of high frequency opto-electronic components needed to realize the potential system architectures is also discussed. It is concluded that an optical fiber network will reduce weight and complexity, and increase reliability and performance, but may require higher power.

  8. Clock recovery from 40 Gbps optical signal with optical phase-locked loop based on a terahertz optical asymmetric demultiplexer

    NASA Astrophysics Data System (ADS)

    Jhon, Young Min; Ki, Ho Jin; Kim, Sun Ho

    2003-05-01

    10 GHz clock recovery from 40 Gbps optical time-division-multiplexed (OTDM) signal pulses is experimentally demonstrated using optical phase lock loop based on a terahertz optical asymmetric demultiplexer (TOAD) with a local-reference-oscillator-free electronic feedback circuit. The clock pulse that was used as the control pulse had energy of 800 fJ and the SNR of the time-extracted 10 GHz RF signal to the side components was larger than 40 dB.

  9. All-optical phase modulation for integrated interferometric biosensors.

    PubMed

    Dante, Stefania; Duval, Daphné; Sepúlveda, Borja; González-Guerrero, Ana Belen; Sendra, José Ramón; Lechuga, Laura M

    2012-03-26

    We present the theoretical and the experimental implementation of an all-optical phase modulation system in integrated Mach-Zehnder Interferometers to solve the drawbacks related to the periodic nature of the interferometric signal. Sensor phase is tuned by modulating the emission wavelength of low-cost commercial laser diodes by changing their output power. FFT deconvolution of the signal allows for direct phase readout, immune to sensitivity variations and to light intensity fluctuations. This simple phase modulation scheme increases the signal-to-noise ratio of the measurements in one order of magnitude, rendering in a sensor with a detection limit of 1.9·10⁻⁷ RIU. The viability of the all-optical modulation approach is demonstrated with an immunoassay detection as a biosensing proof of concept.

  10. Optical phase locked loop for transparent inter-satellite communications.

    PubMed

    Herzog, F; Kudielka, K; Erni, D; Bächtold, W

    2005-05-16

    A novel type of optical phase locked loop (OPLL), optimized for homodyne inter-satellite communication, is presented. The loop employs a conventional 180? 3 dB optical hybrid and an AC-coupled balanced front end. No residual carrier transmission is required for phase locking. The loop accepts analog as well as digital data and various modulation formats. The only requirement to the transmitted user signal is a constant envelope. Phase error extraction occurs through applying a small sinusoidal local oscillator (LO) phase disturbance, while measuring its impact on the power of the baseband output signal. First experimental results indicate a receiver sensitivity of 36 photons/bit (-55.7 dBm) for a BER of 10 ;-9, when transmitting a PRBS-31 signal at a data rate of 400 Mbit/s. The system setup employs diode-pumped Nd:YAG lasers at a wavelength of 1.06 mum.

  11. Three-dimensional phase-contrast X-ray microtomography with scanning-imaging X-ray microscope optics.

    PubMed

    Takeuchi, Akihisa; Uesugi, Kentaro; Suzuki, Yoshio

    2013-09-01

    A three-dimensional (3D) X-ray tomographic micro-imaging system has been developed. The optical system is based on a scanning-imaging X-ray microscope (SIXM) optics, which is a hybrid system consisting of a scanning microscope optics with a one-dimensional (1D) focusing (line-focusing) device and an imaging microscope optics with a 1D objective. In the SIXM system, each 1D dataset of a two-dimensional (2D) image is recorded independently. An object is illuminated with a line-focused beam. Positional information of the region illuminated by the line-focused beam is recorded with the 1D imaging microscope optics as line-profile data. By scanning the object with the line focus, 2D image data are obtained. In the same manner as for a scanning microscope optics with a multi-pixel detector, imaging modes such as phase contrast and absorption contrast can be arbitrarily configured after the image data acquisition. By combining a tomographic scan method and the SIXM system, quantitative 3D imaging is performed. Results of a feasibility study of the SIXM for 3D imaging are shown.

  12. Phase retrieval of reflectance for nanoparticle optical identification.

    PubMed

    Saarinen, Jarkko J; Uozumi, Jun; Vartiainen, Erik M; Peiponen, Kai-Erik

    2012-06-15

    We present a method for optical identification of dielectric and metal nanoparticles in a liquid matrix using phase retrieval of reflectance with TE- and TM-polarized light. A formula is derived for extracting the effective complex dielectric function of a nanoparticle colloid based on different complex reflectance components. The phase retrieval is performed using the maximum entropy method. We observe excellent accuracy both for dielectric and metallic nanoparticles with volume fractions up to 10%.

  13. Optical Refraction in Silver: Counterposition, Negative Phase Velocity and Orthogonal Phase Velocity

    ERIC Educational Resources Information Center

    Naqvi, Qaisar A.; Mackay, Tom G.; Lakhtakia, Akhlesh

    2011-01-01

    Complex behaviour associated with metamaterials can arise even in commonplace isotropic dielectric materials. We demonstrate how silver, for example, can support negative phase velocity and counterposition, but not negative refraction, at optical frequencies. The transition from positive to negative phase velocity is not accompanied by remarkable…

  14. Optical phase curves of exoplanets at small and large phase angles

    NASA Astrophysics Data System (ADS)

    García Muñoz, Antonio

    2016-10-01

    Phase curves and secondary eclipses provide key information on exoplanet atmospheres. Indeed, recent work on close-in giant planets observed by Kepler has shown that it is possible to constrain various reflecting, dynamical and thermal properties of their atmospheres from the analysis of the planets' phase curves. This presentation discusses new diagnostic possibilities for the characterization of exoplanet atmospheres with optical phase curves. These possibilities benefit from the fact that at optical wavelengths the signal from the planet is either partly or mostly determined by scattering of starlight within its atmosphere, which entails that the structure of the planet's phase curve mimics to some extent the optical properties of the atmospheric medium. In particular, we will show how cloud properties such as the particle size or the atmospheric scale height might be constrained through observations at small (i.e. near transit) and large (i.e. near occultation) phase angles. We will emphasize how the interpretation of optical phase curves differs from the interpretation of phase curves obtained at longer wavelengths. The conclusions are relevant to the study of Kepler planets, but also to the investigation of phase curves to be delivered by upcoming space missions such as CHEOPS, JWST, PLATO and TESS.

  15. Geometric phases in astigmatic optical modes of arbitrary order

    SciTech Connect

    Habraken, Steven J. M.; Nienhuis, Gerard

    2010-08-15

    The transverse spatial structure of a paraxial beam of light is fully characterized by a set of parameters that vary only slowly under free propagation. They specify bosonic ladder operators that connect modes of different orders, in analogy to the ladder operators connecting harmonic-oscillator wave functions. The parameter spaces underlying sets of higher-order modes are isomorphic to the parameter space of the ladder operators. We study the geometry of this space and the geometric phase that arises from it. This phase constitutes the ultimate generalization of the Gouy phase in paraxial wave optics. It reduces to the ordinary Gouy phase and the geometric phase of nonastigmatic optical modes with orbital angular momentum in limiting cases. We briefly discuss the well-known analogy between geometric phases and the Aharonov-Bohm effect, which provides some complementary insights into the geometric nature and origin of the generalized Gouy phase shift. Our method also applies to the quantum-mechanical description of wave packets. It allows for obtaining complete sets of normalized solutions of the Schroedinger equation. Cyclic transformations of such wave packets give rise to a phase shift, which has a geometric interpretation in terms of the other degrees of freedom involved.

  16. 2D quasiperiodic plasmonic crystals

    PubMed Central

    Bauer, Christina; Kobiela, Georg; Giessen, Harald

    2012-01-01

    Nanophotonic structures with irregular symmetry, such as quasiperiodic plasmonic crystals, have gained an increasing amount of attention, in particular as potential candidates to enhance the absorption of solar cells in an angular insensitive fashion. To examine the photonic bandstructure of such systems that determines their optical properties, it is necessary to measure and model normal and oblique light interaction with plasmonic crystals. We determine the different propagation vectors and consider the interaction of all possible waveguide modes and particle plasmons in a 2D metallic photonic quasicrystal, in conjunction with the dispersion relations of a slab waveguide. Using a Fano model, we calculate the optical properties for normal and inclined light incidence. Comparing measurements of a quasiperiodic lattice to the modelled spectra for angle of incidence variation in both azimuthal and polar direction of the sample gives excellent agreement and confirms the predictive power of our model. PMID:23209871

  17. Diagnostics of two-phase flows with high concentration of a solid dispersed phase using fiber-optic sensors

    NASA Astrophysics Data System (ADS)

    Evseev, A. R.

    2016-10-01

    This paper is focused on the physical modeling of two-phase flows with high concentration of the dispersed phase. The fiber-optical sensors and their calibration procedure were developed for bubble concentration measurements in the fluidized bed apparatus (FB). Distributions of bubble concentration in the 2D and 3D FB apparatuses, which determine the quality of fluidization and local density of filling material, were obtained. The techniques of particle velocity and concentration measurements in the circulating fluidized bed (CFB) was developed using three-fiber sensor (the differential scheme of LDA) operated in backscattering regime. Sensor operation was analyzed and the main systematic measurement errors were determined; the original construction of the sensor was designed. The data on the velocity and concentration profiles of dispersed phase in a large-scale CFB apparatus were obtained for fluidization of particles by air. It was found that with increasing circulation velocity in the CFB apparatus, the particle concentration increases in the near-wall region much higher than in the flow core. The method of particle velocity measurements in a liquid was developed using the laser Doppler fiber anemometer (LDFA-1), operating in the backscattering regime. The signal to noise ratio was obtained for particles of different size and material in test measurements. The rates of consolidated precipitation of cryolite particles in a sedimentation apparatus with the inclined walls were measured.

  18. Electro-optical processing of phased-array antenna data

    NASA Technical Reports Server (NTRS)

    Casasent, D.; Casasayas, F.

    1975-01-01

    An on-line two-dimensional optical processor has been used to process simulated linear and planar phased-array radar data off-line but at real-time data rates. The input transducer is an electron-beam-addressed KD2PO4 light valve.

  19. Phase aberration correction by correlation in digital holographic adaptive optics

    PubMed Central

    Liu, Changgeng; Yu, Xiao; Kim, Myung K.

    2013-01-01

    We present a phase aberration correction method based on the correlation between the complex full-field and guide-star holograms in the context of digital holographic adaptive optics (DHAO). Removal of a global quadratic phase term before the correlation operation plays an important role in the correction. Correlation operation can remove the phase aberration at the entrance pupil plane and automatically refocus the corrected optical field. Except for the assumption that most aberrations lie at or close to the entrance pupil, the presented method does not impose any other constraints on the optical systems. Thus, it greatly enhances the flexibility of the optical design for DHAO systems in vision science and microscopy. Theoretical studies show that the previously proposed Fourier transform DHAO (FTDHAO) is just a special case of this general correction method, where the global quadratic phase term and a defocus term disappear. Hence, this correction method realizes the generalization of FTDHAO into arbitrary DHAO systems. The effectiveness and robustness of this method are demonstrated by simulations and experiments. PMID:23669707

  20. Ultra-low noise optical phase-locked loop

    NASA Astrophysics Data System (ADS)

    Ayotte, Simon; Babin, André; Costin, François

    2014-03-01

    The relative phase between two fiber lasers is controlled via a high performance optical phase-locked loop (OPLL). Two parameters are of particular importance for the design: the intrinsic phase noise of the laser (i.e. its linewidth) and a high-gain, low-noise electronic locking loop. In this work, one of the lowest phase noise fiber lasers commercially available was selected (i.e. NP Photonics Rock fiber laser module), with sub-kHz linewidth at 1550.12 nm. However, the fast tuning mechanism of such lasers is through stretching its cavity length with a piezoelectric transducer which has a few 10s kHz bandwidth. To further increase the locking loop bandwidth to several MHz, a second tuning mechanism is used by adding a Lithium Niobate phase modulator in the laser signal path. The OPLL is thus divided into two locking loops, a slow loop acting on the laser piezoelectric transducer and a fast loop acting on the phase modulator. The beat signal between the two phase-locked lasers yields a highly pure sine wave with an integrated phase error of 0.0012 rad. This is orders of magnitude lower than similar existing systems such as the Laser Synthesizer used for distribution of photonic local oscillator (LO) for the Atacama Large Millimeter Array radio telescope in Chile. Other applications for ultra-low noise OPLL include coherent power combining, Brillouin sensing, light detection and ranging (LIDAR), fiber optic gyroscopes, phased array antenna and beam steering, generation of LOs for next generation coherent communication systems, coherent analog optical links, terahertz generation and coherent spectroscopy.

  1. Optically controlled phased-array antenna with PSK communications

    NASA Astrophysics Data System (ADS)

    Cooper, Martin J.; Sample, Peter; Lewis, Meirion F.; Wilson, Rebecca A.

    2004-11-01

    An optically controlled RF/microwave/mm-wave phased array antenna has been developed operating at 10 GHz with 30 kHz reconfiguration rate via the use of a micromachined silicon Spatial Light Modulator. A communications function has been demonstrated with a variety of Phase Shift Keying modulation schemes (BPSK, QPSK, MSK) at data rates up to 200 Mbit/s and low BER (<1×10-9). A single channel has been demonstrated at 35 GHz. The properties of photonic components are taken advantage of in several ways: (i) since the carrier frequency is derived from heterodyning of lasers, it is tuneable from almost DC-100 GHz, (ii) the use of optical fiber allows for EMI immune antenna remoting, and (iii) the wide information bandwidth of optical modulators, which in this configuration is carrier frequency independent. The above is achieved in a lightweight and compact format, with considerable scope for further reductions in size and weight.

  2. Phased Array Mirror Extendible Large Aperture (PAMELA) Optics Adjustment

    NASA Technical Reports Server (NTRS)

    1995-01-01

    Scientists at Marshall's Adaptive Optics Lab demonstrate the Wave Front Sensor alignment using the Phased Array Mirror Extendible Large Aperture (PAMELA) optics adjustment. The primary objective of the PAMELA project is to develop methods for aligning and controlling adaptive optics segmented mirror systems. These systems can be used to acquire or project light energy. The Next Generation Space Telescope is an example of an energy acquisition system that will employ segmented mirrors. Light projection systems can also be used for power beaming and orbital debris removal. All segmented optical systems must be adjusted to provide maximum performance. PAMELA is an on going project that NASA is utilizing to investigate various methods for maximizing system performance.

  3. Impact of Cytochrome P450 2D6 Function on the Chiral Blood Plasma Pharmacokinetics of 3,4-Methylenedioxymethamphetamine (MDMA) and Its Phase I and II Metabolites in Humans.

    PubMed

    Steuer, Andrea E; Schmidhauser, Corina; Tingelhoff, Eva H; Schmid, Yasmin; Rickli, Anna; Kraemer, Thomas; Liechti, Matthias E

    2016-01-01

    3,4-methylenedioxymethamphetamine (MDMA; ecstasy) metabolism is known to be stereoselective, with preference for S-stereoisomers. Its major metabolic step involves CYP2D6-catalyzed demethylenation to 3,4-dihydroxymethamphetamine (DHMA), followed by methylation and conjugation. Alterations in CYP2D6 genotype and/or phenotype have been associated with higher toxicity. Therefore, the impact of CYP2D6 function on the plasma pharmacokinetics of MDMA and its phase I and II metabolites was tested by comparing extensive metabolizers (EMs), intermediate metabolizers (IMs), and EMs that were pretreated with bupropion as a metabolic inhibitor in a controlled MDMA administration study. Blood plasma samples were collected from 16 healthy participants (13 EMs and three IMs) up to 24 h after MDMA administration in a double-blind, placebo-controlled, four-period, cross-over design, with subjects receiving 1 week placebo or bupropion pretreatment followed by a single placebo or MDMA (125 mg) dose. Bupropion pretreatment increased the maximum plasma concentration (Cmax) and area under the plasma concentration-time curve from 0 to 24 h (AUC24) of R-MDMA (9% and 25%, respectively) and S-MDMA (16% and 38%, respectively). Bupropion reduced the Cmax and AUC24 of the CYP2D6-dependently formed metabolite stereoisomers of DHMA 3-sulfate, DHMA 4-sulfate, and 4-hydroxy-3-methoxymethamphetamine (HMMA sulfate and HMMA glucuronide) by approximately 40%. The changes that were observed in IMs were generally comparable to bupropion-pretreated EMs. Although changes in stereoselectivity based on CYP2D6 activity were observed, these likely have low clinical relevance. Bupropion and hydroxybupropion stereoisomer pharmacokinetics were unaltered by MDMA co-administration. The present data might aid further interpretations of toxicity based on CYP2D6-dependent MDMA metabolism.

  4. Impact of Cytochrome P450 2D6 Function on the Chiral Blood Plasma Pharmacokinetics of 3,4-Methylenedioxymethamphetamine (MDMA) and Its Phase I and II Metabolites in Humans

    PubMed Central

    Steuer, Andrea E.; Schmidhauser, Corina; Tingelhoff, Eva H.; Schmid, Yasmin; Rickli, Anna; Kraemer, Thomas; Liechti, Matthias E.

    2016-01-01

    3,4-methylenedioxymethamphetamine (MDMA; ecstasy) metabolism is known to be stereoselective, with preference for S-stereoisomers. Its major metabolic step involves CYP2D6-catalyzed demethylenation to 3,4-dihydroxymethamphetamine (DHMA), followed by methylation and conjugation. Alterations in CYP2D6 genotype and/or phenotype have been associated with higher toxicity. Therefore, the impact of CYP2D6 function on the plasma pharmacokinetics of MDMA and its phase I and II metabolites was tested by comparing extensive metabolizers (EMs), intermediate metabolizers (IMs), and EMs that were pretreated with bupropion as a metabolic inhibitor in a controlled MDMA administration study. Blood plasma samples were collected from 16 healthy participants (13 EMs and three IMs) up to 24 h after MDMA administration in a double-blind, placebo-controlled, four-period, cross-over design, with subjects receiving 1 week placebo or bupropion pretreatment followed by a single placebo or MDMA (125 mg) dose. Bupropion pretreatment increased the maximum plasma concentration (Cmax) and area under the plasma concentration-time curve from 0 to 24 h (AUC24) of R-MDMA (9% and 25%, respectively) and S-MDMA (16% and 38%, respectively). Bupropion reduced the Cmax and AUC24 of the CYP2D6-dependently formed metabolite stereoisomers of DHMA 3-sulfate, DHMA 4-sulfate, and 4-hydroxy-3-methoxymethamphetamine (HMMA sulfate and HMMA glucuronide) by approximately 40%. The changes that were observed in IMs were generally comparable to bupropion-pretreated EMs. Although changes in stereoselectivity based on CYP2D6 activity were observed, these likely have low clinical relevance. Bupropion and hydroxybupropion stereoisomer pharmacokinetics were unaltered by MDMA co-administration. The present data might aid further interpretations of toxicity based on CYP2D6-dependent MDMA metabolism. PMID:26967321

  5. Coherent Detection of Optical Quadrature Phase-Shift Keying Signals With Carrier Phase Estimation

    NASA Astrophysics Data System (ADS)

    Ly-Gagnon, Dany-Sebastien; Tsukamoto, Satoshi; Katoh, Kazuhiro; Kikuchi, Kazuro

    2006-01-01

    This paper describes a coherent optical receiver for demodulating optical quadrature phase-shift keying (QPSK) signals. At the receiver, a phase-diversity homodyne detection scheme is employed without locking the phase of the local oscillator (LO). To handle the carrier phase drift, the carrier phase is estimated with digital signal processing (DSP) on the homodyne-detected signal. Such a scheme presents the following major advantages over the conventional optical differential detection. First, its bit error rate (BER) performance is better than that of differential detection. This higher sensitivity can extend the reach of unrepeated transmission systems and reduce crosstalk between multiwavelength channels. Second, the optoelectronic conversion process is linear, so that the whole optical signal information can be postprocessed in the electrical domain. Third, this scheme is applicable to multilevel modulation formats such as M-array PSK and quadrature amplitude modulation (QAM). The performance of the receiver is evaluated through various simulations and experiments. As a result, an unrepeated transmission over 210 km with a 20-Gb/s optical QPSK signal is achieved. Moreover, in wavelength-division multiplexing (WDM) environment, coherent detection allows the filtering of a desired wavelength channel to reside entirely in the electrical domain, taking advantage of the sharp cutoff characteristics of electrical filters. The experiments show the feasibility to transmit polarization-multiplexed 40-Gb/s QPSK signals over 200 km with channel spacing of 16 GHz, leading to a spectral efficiency as high as 2.5 b/s/Hz.

  6. Improving the privacy of optical steganography with temporal phase masks.

    PubMed

    Wang, Z; Fok, M P; Xu, L; Chang, J; Prucnal, P R

    2010-03-15

    Temporal phase modulation of spread stealth signals is proposed and demonstrated to improve optical steganography transmission privacy. After phase modulation, the temporally spread stealth signal has a more complex spectral-phase-temporal relationship, such that the original temporal profile cannot be restored when only dispersion compensation is applied to the temporally spread stealth signals. Therefore, it increases the difficulty for the eavesdropper to detect and intercept the stealth channel that is hidden under a public transmission, even with a correct dispersion compensation device. The experimental results demonstrate the feasibility of this approach and display insignificant degradation in transmission performance, compared to the conventional stealth transmission without temporal phase modulation. The proposed system can also work without a clock transmission for signal synchronization. Our analysis and simulation results show that it is difficult for the adversary to detect the existence of the stealth transmission, or find the correct phase mask to recover the stealth signals.

  7. Fiber optic signal distribution for phased array antennas

    NASA Astrophysics Data System (ADS)

    Mecherle, G. S.

    1992-03-01

    The use of a 32-GHz phased-array transmitting antenna with fiberoptic signal distribution is considered in the context of a Mars relay satellite for NASA's Space Exploration Initiative. The specifications of the proposed application are assessed with specific attention given to the EIRP requirement of 86 dBW and its ramifications on the phased array, antenna, and photonic architecture. A photonic performance analysis is conducted to study phase-noise and SNR degradations to determine whether phase-locked loop (PLL) complexity is required. SNR and phase noise are examined as a function of the number of optical splits, and the number is shown to be limited to 350. Use of the PLL allows one laser to support 650 elements - as opposed to 250 - showing that only a single laser diode is needed to support the array for the Mars transmitter.

  8. Demonstration of all-optical phase noise suppression scheme using optical nonlinearity and conversion/dispersion delay.

    PubMed

    Chitgarha, Mohammad Reza; Khaleghi, Salman; Ziyadi, Morteza; Mohajerin-Ariaei, Amirhossein; Almaiman, Ahmed; Daab, Wajih; Rogawski, Devora; Tur, Moshe; Touch, Joseph D; Langrock, Carsten; Fejer, Martin M; Willner, Alan E

    2014-05-15

    We propose and demonstrate an all-optical phase noise reduction scheme that uses optical nonlinear mixing and tunable optical delays to suppress the low-speed phase noise induced by laser linewidth. By utilizing the phase conjugate copy of the original signal and two narrow-linewidth optical pumps, the phase noise induced by laser linewidth can be reduced by a factor of ∼5 for a laser with 500-MHz phase noise bandwidth. The error-vector-magnitude can be improved from ∼30% to ∼14% for the same laser linewidth for 40-Gbit/s quadrature phase shift keying signal.

  9. Vertical 2D Heterostructures

    NASA Astrophysics Data System (ADS)

    Lotsch, Bettina V.

    2015-07-01

    Graphene's legacy has become an integral part of today's condensed matter science and has equipped a whole generation of scientists with an armory of concepts and techniques that open up new perspectives for the postgraphene area. In particular, the judicious combination of 2D building blocks into vertical heterostructures has recently been identified as a promising route to rationally engineer complex multilayer systems and artificial solids with intriguing properties. The present review highlights recent developments in the rapidly emerging field of 2D nanoarchitectonics from a materials chemistry perspective, with a focus on the types of heterostructures available, their assembly strategies, and their emerging properties. This overview is intended to bridge the gap between two major—yet largely disjunct—developments in 2D heterostructures, which are firmly rooted in solid-state chemistry or physics. Although the underlying types of heterostructures differ with respect to their dimensions, layer alignment, and interfacial quality, there is common ground, and future synergies between the various assembly strategies are to be expected.

  10. Phase error statistics of a phase-locked loop synchronized direct detection optical PPM communication system

    NASA Technical Reports Server (NTRS)

    Natarajan, Suresh; Gardner, C. S.

    1987-01-01

    Receiver timing synchronization of an optical Pulse-Position Modulation (PPM) communication system can be achieved using a phased-locked loop (PLL), provided the photodetector output is suitably processed. The magnitude of the PLL phase error is a good indicator of the timing error at the receiver decoder. The statistics of the phase error are investigated while varying several key system parameters such as PPM order, signal and background strengths, and PPL bandwidth. A practical optical communication system utilizing a laser diode transmitter and an avalanche photodiode in the receiver is described, and the sampled phase error data are presented. A linear regression analysis is applied to the data to obtain estimates of the relational constants involving the phase error variance and incident signal power.

  11. Nonlinear Phase Distortion in a Ti:Sapphire Optical Amplifier for Optical Stochastic Cooling

    SciTech Connect

    Andorf, Matthew; Lebedev, Valeri; Piot, Philippe; Ruan, Jinhao

    2016-06-01

    Optical Stochastic Cooling (OSC) has been considered for future high-luminosity colliders as it offers much faster cooling time in comparison to the micro-wave stochastic cooling. The OSC technique relies on collecting and amplifying a broadband optical signal from a pickup undulator and feeding the amplified signal back to the beam. It creates a corrective kick in a kicker undulator. Owing to its superb gain qualities and broadband amplification features, Titanium:Sapphire medium has been considered as a gain medium for the optical amplifier (OA) needed in the OSC*. A limiting factor for any OA used in OSC is the possibility of nonlinear phase distortions. In this paper we experimentally measure phase distortions by inserting a single-pass OA into one leg of a Mach-Zehnder interferometer. The measurement results are used to estimate the reduction of the corrective kick a particle would receive due to these phase distortions in the kicker undulator.

  12. Raman-Enhanced Phase-Sensitive Fibre Optical Parametric Amplifier

    PubMed Central

    Fu, Xuelei; Guo, Xiaojie; Shu, Chester

    2016-01-01

    Phase-sensitive amplification is of great research interest owing to its potential in noiseless amplification. One key feature in a phase-sensitive amplifier is the gain extinction ratio defined as the ratio of the maximum to the minimum gains. It quantifies the capability of the amplifier in performing low-noise amplification for high phase-sensitive gain. Considering a phase-sensitive fibre optical parametric amplifier for linear amplification, the gain extinction ratio increases with the phase-insensitive parametric gain achieved from the same pump. In this work, we use backward Raman amplification to increase the phase-insensitive parametric gain, which in turn improves the phase-sensitive operation. Using a 955 mW Raman pump, the gain extinction ratio is increased by 9.2 dB. The improvement in the maximum phase-sensitive gain is 18.7 dB. This scheme can significantly boost the performance of phase-sensitive amplification in a spectral range where the parametric pump is not sufficiently strong but broadband Raman amplification is available. PMID:26830136

  13. Optical response of phase change material for metasurface (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Chu, Cheng Hung; Tseng, Ming Lun; Chen, Jie; Wu, Hui Jun; Wang, Hsiang-Chu; Chen, Ting-Yu; Tsai, Din Ping

    2016-09-01

    Phase change materials are used as the recording layer in optical data storage, electronic storage and nanolithography due to the enormous physical difference between crystalline and amorphous states. In recent years, they are demonstrated to exploit in various tunable plasmonic devices, such as perfect absorber, planar lenses, plasmonic antenna, Fano resonance and so on. However, in these researches, the phase change material merely plays a role as a refractive index switchable substrate. In this paper, we study the intrinsic optical properties of phase change material Ge2Sb2Te5 (GST) in the near-infrared regime. A clear insight into the dipole resonance system of GST is provided. The reflection phase retardation and intensity of each unit cells depending on the phase state and geometry are estimated. Further, we introduce the concept of reconfigurable gradient metasurface, which has different anomalous reflection angles by switching the combination of nanorods with different geometries and phase states. The research has great potential in the area of tunable metamaterial device (metadevice) in the future.

  14. Reflection/transmission phase shift interferometer and viewing optics

    SciTech Connect

    Monjes, J.A.; Weinstein, B.W.; Willenborg, D.L.

    1981-06-15

    The interferometer and viewing optics that are the main optical components of an Automated Surface Mapping system (ASM) used to characterize the surface topography and the wall thickness uniformity of opaque and transparent spherical shells is described. To characterize surface finish or wall thickness of spherical shells with an accuracy of 10 nm and a resolution of 1 ..mu..m the differential phase shift between two beams of orthogonal polarizations is measured, before and after the probe beam has interacted with the test object.

  15. Optimized phase gradient measurements and phase-amplitude interplay in optical coherence elastography

    NASA Astrophysics Data System (ADS)

    Zaitsev, Vladimir Y.; Matveyev, Alexander L.; Matveev, Lev A.; Gelikonov, Grigory V.; Sovetsky, Aleksandr A.; Vitkin, Alex

    2016-11-01

    In compressional optical coherence elastography, phase-variation gradients are used for estimating quasistatic strains created in tissue. Using reference and deformed optical coherence tomography (OCT) scans, one typically compares phases from pixels with the same coordinates in both scans. Usually, this limits the allowable strains to fairly small values < to 10-3, with the caveat that such weak phase gradients may become corrupted by stronger measurement noises. Here, we extend the OCT phase-resolved elastographic methodology by (1) showing that an order of magnitude greater strains can significantly increase the accuracy of derived phase-gradient differences, while also avoiding error-phone phase-unwrapping procedures and minimizing the influence of decorrelation noise caused by suprapixel displacements, (2) discussing the appearance of artifactual stiff inclusions in resultant OCT elastograms in the vicinity of bright scatterers due to the amplitude-phase interplay in phase-variation measurements, and (3) deriving/evaluating methods of phase-gradient estimation that can outperform conventionally used least-square gradient fitting. We present analytical arguments, numerical simulations, and experimental examples to demonstrate the advantages of the proposed optimized phase-variation methodology.

  16. High power compatible internally sensed optical phased array.

    PubMed

    Roberts, Lyle E; Ward, Robert L; Francis, Samuel P; Sibley, Paul G; Fleddermann, Roland; Sutton, Andrew J; Smith, Craig; McClelland, David E; Shaddock, Daniel A

    2016-06-13

    The technical embodiment of the Huygens-Fresnel principle, an optical phased array (OPA) is an arrangement of optical emitters with relative phases controlled to create a desired beam profile after propagation. One important application of an OPA is coherent beam combining (CBC), which can be used to create beams of higher power than is possible with a single laser source, especially for narrow linewidth sources. Here we present an all-fiber architecture that stabilizes the relative output phase by inferring the relative path length differences between lasers using the small fraction of light that is back-reflected into the fiber at the OPA's glass-air interface, without the need for any external sampling optics. This architecture is compatible with high power continuous wave laser sources (e.g., fiber amplifiers) up to 100 W per channel. The high-power compatible internally sensed OPA was implemented experimentally using commercial 15 W fiber amplifiers, demonstrating an output RMS phase stability of λ/194, and the ability to steer the beam at up to 10 kHz.

  17. Fourier optics analysis of phase-mask-based path-length-multiplexed optical coherence tomography.

    PubMed

    Yin, Biwei; Dwelle, Jordan; Wang, Bingqing; Wang, Tianyi; Feldman, Marc D; Rylander, Henry G; Milner, Thomas E

    2015-11-01

    Optical coherence tomography (OCT) is an imaging technique that constructs a depth-resolved image by measuring the optical path-length difference between broadband light backscattered from a sample and a reference surface. For many OCT sample arm optical configurations, sample illumination and backscattered light detection share a common path. When a phase mask is placed in the sample path, features in the detected signal are observed, which suggests that an analysis of a generic common path OCT imaging system is warranted. In this study, we present a Fourier optics analysis using a Fresnel diffraction approximation of an OCT system with a path-length-multiplexing element (PME) inserted in the sample arm optics. The analysis may be generalized for most phase-mask-based OCT systems. A radial-angle-diverse PME is analyzed in detail, and the point spread function, coherent transfer function, sensitivity of backscattering angular diversity detection, and signal formation in terms of sample spatial frequency are simulated and discussed. The analysis reveals important imaging features and application limitations of OCT imaging systems with a phase mask in the sample path optics.

  18. Two dimensional thermo-optic beam steering using a silicon photonic optical phased array

    NASA Astrophysics Data System (ADS)

    Mahon, Rita; Preussner, Marcel W.; Rabinovich, William S.; Goetz, Peter G.; Kozak, Dmitry A.; Ferraro, Mike S.; Murphy, James L.

    2016-03-01

    Components for free space optical communication terminals such as lasers, amplifiers, and receivers have all seen substantial reduction in both size and power consumption over the past several decades. However, pointing systems, such as fast steering mirrors and gimbals, have remained large, slow and power-hungry. Optical phased arrays provide a possible solution for non-mechanical beam steering devices that can be compact and lower in power. Silicon photonics is a promising technology for phased arrays because it has the potential to scale to many elements and may be compatible with CMOS technology thereby enabling batch fabrication. For most free space optical communication applications, two-dimensional beam steering is needed. To date, silicon photonic phased arrays have achieved two-dimensional steering by combining thermo-optic steering, in-plane, with wavelength tuning by means of an output grating to give angular tuning, out-of-plane. While this architecture might work for certain static communication links, it would be difficult to implement for moving platforms. Other approaches have required N2 controls for an NxN element phased array, which leads to complexity. Hence, in this work we demonstrate steering using the thermo-optic effect for both dimensions with a simplified steering mechanism requiring only two control signals, one for each steering dimension.

  19. Suppression of amplitude-to-phase noise conversion in balanced optical-microwave phase detectors.

    PubMed

    Lessing, Maurice; Margolis, Helen S; Brown, C Tom A; Gill, Patrick; Marra, Giuseppe

    2013-11-04

    We demonstrate an amplitude-to-phase (AM-PM) conversion coefficient for a balanced optical-microwave phase detector (BOM-PD) of 0.001 rad, corresponding to AM-PM induced phase noise 60 dB below the single-sideband relative intensity noise of the laser. This enables us to generate 8 GHz microwave signals from a commercial Er-fibre comb with a single-sideband residual phase noise of -131 dBc Hz(-1) at 1 Hz offset frequency and -148 dBc Hz(-1) at 1 kHz offset frequency.

  20. Exotic quantum phase transitions of 2+1d Dirac fermions, and connections to 2d and 3d topological insulators

    NASA Astrophysics Data System (ADS)

    Slagle, Kevin

    2015-03-01

    Using determinant quantum Monte Carlo simulations, we demonstrate that an extended Hubbard model on a bilayer honeycomb lattice has two novel quantum phase transitions, each with connections to symmetry protected topological states. 1) The first is a continuous phase transition between the weakly interacting gapless Dirac fermion phase and a strongly interacting fully gapped and symmetric trivial phase. Because there is no spontaneous symmetry breaking, this transition cannot be described by the standard Gross-Neveu model. We argue that this phase transition is related to the Z16 classification of the topological superconductor 3He-B phase with interactions. 2) The second is a quantum critical point between a quantum spin Hall insulator with spin Sz conservation and the previously mentioned strongly interacting gapped phase. At the critical point the single particle excitations remain gapped, while spin and charge gaps close. We argue that this transition is described by a bosonic O(4) nonlinear sigma model field theory with a topological Θ-term.

  1. 2D semiconductor optoelectronics

    NASA Astrophysics Data System (ADS)

    Novoselov, Kostya

    The advent of graphene and related 2D materials has recently led to a new technology: heterostructures based on these atomically thin crystals. The paradigm proved itself extremely versatile and led to rapid demonstration of tunnelling diodes with negative differential resistance, tunnelling transistors, photovoltaic devices, etc. By taking the complexity and functionality of such van der Waals heterostructures to the next level we introduce quantum wells engineered with one atomic plane precision. Light emission from such quantum wells, quantum dots and polaritonic effects will be discussed.

  2. Split-spectrum phase-gradient optical coherence tomography angiography

    PubMed Central

    Liu, Gangjun; Jia, Yali; Pechauer, Alex D.; Chandwani, Rahul; Huang, David

    2016-01-01

    A phase gradient angiography (PGA) method is proposed for optical coherence tomography (OCT). This method allows the use of phase information to map the microvasculature in tissue without the correction of bulk motion and laser trigger jitter induced phase artifacts. PGA can also be combined with the amplitude/intensity to improve the performance. Split-spectrum technique can further increase the signal to noise ratio by more than two times. In-vivo imaging of human retinal circulation is shown with a 70 kHz, 840 nm spectral domain OCT system and a 200 kHz, 1050 nm swept source OCT system. Four different OCT angiography methods are compared. The best performance was achieved with split-spectrum amplitude and phase-gradient angiography. PMID:27570689

  3. Optical phase distortion due to compressible flow over laser turrets

    NASA Technical Reports Server (NTRS)

    Fuhs, A. E.; Fuhs, S. E.

    1980-01-01

    Analytical models for optical phase distortion due to compressible flow over a laser turret are developed. Phase distortion is calculated for both blunt and small perturbation turrets. For the blunt turret, the Janzen-Rayleigh technique is used to determine the flow field. Phase distortions of 2.2 wavelengths at 3.8 microns are calculated for the blunt turret. For small perturbation turrets, a versatile analytical model is developed for a turret on a fuselage with circular cross section. With a two dimensional Fourier series representation of the turret, any shape can be considered. Both subsonic and supersonic flows can be calculated. Phase distortions of 1.2 wavelengths at 3.8 microns are calculated for one turret at high subsonic Mach number. In addition to being of value for laser turrets, the methods are applicable to reconnaissance aircraft using photographic equipment and cruise missiles using celestial navigation.

  4. Testing and Calibration of Phase Plates for JWST Optical Simulator

    NASA Technical Reports Server (NTRS)

    Gong, Qian; Chu, Jenny; Tournois, Severine; Eichhorn, William; Kubalak, David

    2011-01-01

    Three phase plates were designed to simulate the JWST segmented primary mirror wavefront at three on-orbit alignment stages: coarse phasing, intermediate phasing, and fine phasing. The purpose is to verify JWST's on-orbit wavefront sensing capability. Amongst the three stages, coarse alignment is defined to have piston error between adjacent segments being 30 m to 300 m, intermediate being 0.4 m to 10 m, and fine is below 0.4 m. The phase plates were made of fused silica, and were assembled in JWST Optical Simulator (OSIM). The piston difference was realized by the thickness difference of two adjacent segments. The two important parameters to phase plates are piston and wavefront errors. Dispersed Fringe Sensor (DFS) method was used for initial coarse piston evaluation, which is the emphasis of this paper. Point Diffraction Interferometer (PDI) is used for fine piston and wavefront error. In order to remove piston's 2 pi uncertainty with PDI, three laser wavelengths, 640nm, 660nm, and 780nm, are used for the measurement. The DHS test setup, analysis algorithm and results are presented. The phase plate design concept and its application (i.e. verifying the JWST on-orbit alignment algorithm) are described. The layout of JWST OSIM and the function of phase plates in OSIM are also addressed briefly.

  5. Exploiting the phase of NMR signals to carry useful information. Application to the measurement of chemical shifts in aliased 2D spectra.

    PubMed

    Ramírez-Gualito, Karla; Jeannerat, Damien

    2015-11-01

    Taking advantage of the phase of nuclear magnetic resonance (NMR) signals to encode NMR information is not easy because of their low precision and their sensitivity to nearby signals. We nevertheless demonstrated that the phase in indirect dimension of (1) H-(13) C heteronuclear single quantum coherence (HSQC) signals could provide carbon chemical shifts at low, but sufficient precision to resolve the ambiguities of the chemical shifts in aliased spectra. This approach, we called phase-encoding of the aliasing order Na (PHANA), only requires inserting a constant delay during the t1 evolution time to obtain spectra where signals with mixed phases can be decoded at the processing to reconstruct full spectra with a 15-fold increase in resolution.

  6. Towards non-invasive 3D hepatotoxicity assays with optical coherence phase microscopy

    NASA Astrophysics Data System (ADS)

    Nelson, Leonard J.; Koulovasilopoulos, Andreas; Treskes, Philipp; Hayes, Peter C.; Plevris, John N.; Bagnaninchi, Pierre O.

    2015-03-01

    Three-dimensional tissue-engineered models are increasingly recognised as more physiologically-relevant than standard 2D cell culture for pre-clinical drug toxicity testing. However, many types of conventional toxicity assays are incompatible with dense 3D tissues. This study investigated the use of optical coherence phase microscopy (OCPM) as a novel approach to assess cell death in 3D tissue culture. For 3D micro-spheroid formation Human hepatic C3A cells were encapsulated in hyaluronic acid gels and cultured in 100μl MEME/10%FBS in 96-well plates. After spheroid formation the 3D liver constructs were exposed to acetaminophen on culture day 8. Acetaminophen hepatotoxicity in 3D cultures was evaluated using standard biochemical assays. An inverted OCPM in common path configuration was developed with a Callisto OCT engine (Thorlabs), centred at 930nm and a custom scanning head. Intensity data were used to perform in-depth microstructural imaging. In addition, phase fluctuations were measured by collecting several successive B scans at the same location, and statistics on the first time derivative of the phase, i.e. time fluctuations, were analysed over the acquisition time interval to retrieve overall cell viability. OCPM intensity (cell cluster size) and phase fluctuation statistics were directly compared with biochemical assays. In this study, we investigated optical coherence phase tomography to assess cell death in a 3d liver model after exposure to a prototypical hepatotoxin, acetaminophen. We showed that OCPM has the potential to assess noninvasively and label-free drug toxicity in 3D tissue models.

  7. Three-dimensional intracellular optical coherence phase imaging.

    PubMed

    Helderman, Frank; Haslam, Bryan; de Boer, Johannes F; de Groot, Mattijs

    2013-02-15

    Quantitative phase imaging has many applications for label-free studies of the nanoscale structure and dynamics of cells and tissues. It has been demonstrated that optical coherence phase microscopy (OCPM) can provide quantitative phase information with very high sensitivity. The excellent phase stability of OCPM is obtained by use of a reflection from the microscope cover glass as a local reference field. For detailed intracellular studies a large numerical aperture (N.A.) objective is needed in order to obtain the required resolution. Unfortunately, this also means that the depth of field becomes too small to obtain sufficient power from the cover glass when the beam is focused into the sample. To address this issue, we designed a setup with a dual-beam sample arm. One beam with a large diameter (filling the 1.2 N.A. water immersion objective) enabled high-resolution imaging. A second beam with a small diameter (underfilling the same objective) had a larger depth of field and could detect the cover glass used as a local phase reference. The phase stability of the setup was quantified by monitoring the front and back of a cover glass. The standard deviation of the phase difference was 0.021 rad, corresponding to an optical path displacement of 0.9 nm. The lateral and axial dimensions of the confocal point spread function were 0.42 and 0.84 μm, respectively. This makes our dual-beam setup ideal for three-dimensional intracellular phase imaging.

  8. New developments in optical phase-change memory

    NASA Astrophysics Data System (ADS)

    Ovshinsky, Stanford R.; Czubatyj, Wolodymyr

    2001-02-01

    Phase change technology has progressed from the original invention of Ovshinsky to become the leading choice for rewritable optical disks. ECD's early work in phase change materials and methods for operating in a direct overwrite fashion were crucial to the successes that have been achieved. Since the introduction of the first rewritable phase change products in 1991, the market has expanded from CD-RW into rewritable DVD with creative work going on worldwide. Phase change technology is ideally suited to address the continuous demand for increased storage capacity. First, laser beams can be focused to ever-smaller spot sizes using shorter wavelength lasers and higher performance optics. Blue lasers are now commercially viable and high numerical aperture and near field lenses have been demonstrated. Second, multilevel approaches can be used to increase capacity by a factor of three or more with concomitant increases in data transfer rate. In addition, ECD has decreased manufacturing costs through the use of innovative production technology. These factors combine to accelerate the widespread use of phase change technology. As in all our technologies, such as thin film photovoltaics, nickel metal hydride batteries, hydrogen storage systems, fuel cells, electrical memory, etc., we have invented the materials, the products, the production machines and the production processes for high rate, low-cost manufacture.

  9. Geometrical modeling of optical phase difference for analyzing atmospheric turbulence

    NASA Astrophysics Data System (ADS)

    Yuksel, Demet; Yuksel, Heba

    2013-09-01

    Ways of calculating phase shifts between laser beams propagating through atmospheric turbulence can give us insight towards the understanding of spatial diversity in Free-Space Optical (FSO) links. We propose a new geometrical model to estimate phase shifts between rays as the laser beam propagates through a simulated turbulent media. Turbulence is simulated by filling the propagation path with spherical bubbles of varying sizes and refractive index discontinuities statistically distributed according to various models. The level of turbulence is increased by elongating the range and/or increasing the number of bubbles that the rays interact with along their path. For each statistical representation of the atmosphere, the trajectories of two parallel rays separated by a particular distance are analyzed and computed simultaneously using geometrical optics. The three-dimensional geometry of the spheres is taken into account in the propagation of the rays. The bubble model is used to calculate the correlation between the two rays as their separation distance changes. The total distance traveled by each ray as both rays travel to the target is computed. The difference in the path length traveled will yield the phase difference between the rays. The mean square phase difference is taken to be the phase structure function which in the literature, for a pair of collimated parallel pencil thin rays, obeys a five-third law assuming weak turbulence. All simulation results will be compared with the predictions of wave theory.

  10. Analyser-based phase contrast image reconstruction using geometrical optics.

    PubMed

    Kitchen, M J; Pavlov, K M; Siu, K K W; Menk, R H; Tromba, G; Lewis, R A

    2007-07-21

    Analyser-based phase contrast imaging can provide radiographs of exceptional contrast at high resolution (<100 microm), whilst quantitative phase and attenuation information can be extracted using just two images when the approximations of geometrical optics are satisfied. Analytical phase retrieval can be performed by fitting the analyser rocking curve with a symmetric Pearson type VII function. The Pearson VII function provided at least a 10% better fit to experimentally measured rocking curves than linear or Gaussian functions. A test phantom, a hollow nylon cylinder, was imaged at 20 keV using a Si(1 1 1) analyser at the ELETTRA synchrotron radiation facility. Our phase retrieval method yielded a more accurate object reconstruction than methods based on a linear fit to the rocking curve. Where reconstructions failed to map expected values, calculations of the Takagi number permitted distinction between the violation of the geometrical optics conditions and the failure of curve fitting procedures. The need for synchronized object/detector translation stages was removed by using a large, divergent beam and imaging the object in segments. Our image acquisition and reconstruction procedure enables quantitative phase retrieval for systems with a divergent source and accounts for imperfections in the analyser.

  11. Zero-static-power phase-change optical modulator.

    PubMed

    Jafari, Mohsen; Rais-Zadeh, Mina

    2016-03-15

    This Letter presents an innovative design of an electro-optical modulator using germanium telluride (GeTe) phase change material with an integrated nano-heater. The refractive index and the electrical conductivity of GeTe significantly change as the GeTe goes though the crystallographic phase change. Amorphization and crystallization of GeTe is achieved using the Joule heating method by passing current through an array of metal gratings, where GeTe fills the slits between the metal lines. These metal slits also increase the contrast between the amorphous (on) and crystalline (off) phases of the modulator by having extraordinary transmission and reflection response based on interactions of surface plasmon polaritons (SPPs) with the incoming light. The modulator is designed for 1550 nm wavelength, where GeTe is transparent in the amorphous phase and provides high optical on/off contrast. The metal-insulator-metal (MIM) is designed in such a way to only support SPP excitation when GeTe is crystalline and slit resonance when it is amorphous to increase the modulation index. The modulator is stable in both phases with higher than 12 dB change in transmission with zero static power consumption at room temperature.

  12. Phase and frequency tracking considerations for heterodyne optical communications

    NASA Astrophysics Data System (ADS)

    Kaufmann, J. E.

    Heterodyne optical communications systems represent a potential for substantial performance improvement over direct detection systems. Certain difficulties can arise, however, in heterodyne systems, in connection with a frequency instability of the employed laser. In general, frequency or phase tracking will be needed at the receiver to avoid significant degradations in communications performance and requirements for increased transmitter power unless very stable lasers are available. The present investigation is concerned with receiver phase and frequency tracking schemes suitable for heterodyne PSK and MFSK (multilevel frequency-shift-keying) systems in a space communications context, although this work is also applicable to fiberoptic systems.

  13. An optically controlled Ka-band phased array antenna

    NASA Technical Reports Server (NTRS)

    Kunath, R. R.; Lee, Richard Q.; Martzaklis, K. S.; Shalkhauser, K. A.; Downey, Alan N.; Simons, Rainee N.

    1992-01-01

    The design and development of a small, optically controlled phased array antenna suitable for communication satellite applications are discussed. A vertical integration architecture is used which minimizes the size of the array with its associated beamforming network (BFN). The antenna features a four-element linear microstrip array that uses aperture coupling of the antenna elements to the BFN; a modified Wilkinson power divider BFN; and 32 GHz, four-bit monolithic microwave integrated circuit (MMIC) phase shifters in customized quartz packages with corresponding optoelectronic interface circuits (OEIC's) for control signal reception.

  14. Cloud optical properties and phase discrimination using transmitted spectral radiance

    NASA Astrophysics Data System (ADS)

    LeBlanc, S. E.; Pilewskie, P.; Schmidt, S.; Coddington, O.

    2013-12-01

    Cloud optical thickness, effective radius, and thermodynamic phase are commonly retrieved from satellite measurements of reflected light. Reflected light is influenced most strongly by droplets and ice crystals near cloud top, whereas transmitted light has interacted with cloud particles throughout the entire layer. This transmitted spectral radiance is used in a new method to retrieve cloud thermodynamic phase, cloud optical thickness, and effective radius. The method uses 15 regions of the shortwave transmittance spectrum that are modulated by the spectral absorption and scattering by liquid water droplets and ice particles. Spectral features in these regions are characterized by their slope, normalized magnitude, spectral derivatives, spectral curvature, and second derivatives. We use an optimal estimation method to find the most likely set of cloud optical thickness, effective radius, and thermodynamic phase that produces the observed spectral features in transmitted radiance spectra. This retrieval's performance is evaluated using the GEneralized Nonlinear Retrieval Analysis (GENRA) with the Shannon information content. Results showed that the normalized Shannon information content for retrieved ice cloud properties was larger on average (84%) than for liquid water cloud properties (78%) in addition to having a smaller bias. The retrieval was applied to zenith spectral radiance measured with the ground-based Solar Spectral Flux Radiometer (SSFR) located at Boulder, Colorado for 10 cases that occurred between May 2012 and January 2013. Retrieved cloud optical thickness, effective radius, and their uncertainties are compared to those retrieved using two other methods. By using several spectral characterizations in a large number of spectral bands, the average uncertainty in retrieved optical thickness and effective radius is reduced below that of any other retrieval method based on cloud transmittance.

  15. Dynamical phase diagram of Gaussian wave packets in optical lattices

    NASA Astrophysics Data System (ADS)

    Hennig, H.; Neff, T.; Fleischmann, R.

    2016-03-01

    We study the dynamics of self-trapping in Bose-Einstein condensates (BECs) loaded in deep optical lattices with Gaussian initial conditions, when the dynamics is well described by the discrete nonlinear Schrödinger equation (DNLSE). In the literature an approximate dynamical phase diagram based on a variational approach was introduced to distinguish different dynamical regimes: diffusion, self-trapping, and moving breathers. However, we find that the actual DNLSE dynamics shows a completely different diagram than the variational prediction. We calculate numerically a detailed dynamical phase diagram accurately describing the different dynamical regimes. It exhibits a complex structure that can readily be tested in current experiments in BECs in optical lattices and in optical waveguide arrays. Moreover, we derive an explicit theoretical estimate for the transition to self-trapping in excellent agreement with our numerical findings, which may be a valuable guide as well for future studies on a quantum dynamical phase diagram based on the Bose-Hubbard Hamiltonian.

  16. Optical characterization of phase transitions in pure polymers and blends

    SciTech Connect

    Mannella, Gianluca A.; Brucato, Valerio; La Carrubba, Vincenzo

    2015-12-17

    To study the optical properties of polymeric samples, an experimental apparatus was designed on purpose and set up. The sample is a thin film enclosed between two glass slides and a PTFE frame, with a very thin thermocouple placed on sample for direct temperature measurement. This sample holder was placed between two aluminum slabs, equipped with a narrow slit for optical measurements and with electrical resistances for temperature control. Sample was enlightened by a laser diode, whereas transmitted light was detected with a photodiode. Measurements were carried out on polyethylene-terephtalate (PET) and two different polyamides, tested as pure polymers and blends. The thermal history imposed to the sample consisted in a rapid heating from ambient temperature to a certain temperature below the melting point, a stabilization period, and then a heating at constant rate. After a second stabilization period, the sample was cooled. The data obtained were compared with DSC measurements performed with the same thermal history. In correspondence with transitions detected via DSC (e.g. melting, crystallization and cold crystallization), the optical signal showed a steep variation. In particular, crystallization resulted in a rapid decrease of transmitted light, whereas melting gave up an increase of light transmitted by the sample. Further variations in transmitted light were recorded for blends, after melting: those results may be related to other phase transitions, e.g. liquid-liquid phase separation. All things considered, the apparatus can be used to get reliable data on phase transitions in polymeric systems.

  17. Dynamical phase diagram of Gaussian wave packets in optical lattices.

    PubMed

    Hennig, H; Neff, T; Fleischmann, R

    2016-03-01

    We study the dynamics of self-trapping in Bose-Einstein condensates (BECs) loaded in deep optical lattices with Gaussian initial conditions, when the dynamics is well described by the discrete nonlinear Schrödinger equation (DNLSE). In the literature an approximate dynamical phase diagram based on a variational approach was introduced to distinguish different dynamical regimes: diffusion, self-trapping, and moving breathers. However, we find that the actual DNLSE dynamics shows a completely different diagram than the variational prediction. We calculate numerically a detailed dynamical phase diagram accurately describing the different dynamical regimes. It exhibits a complex structure that can readily be tested in current experiments in BECs in optical lattices and in optical waveguide arrays. Moreover, we derive an explicit theoretical estimate for the transition to self-trapping in excellent agreement with our numerical findings, which may be a valuable guide as well for future studies on a quantum dynamical phase diagram based on the Bose-Hubbard Hamiltonian.

  18. Optical characterization of phase transitions in pure polymers and blends

    NASA Astrophysics Data System (ADS)

    Mannella, Gianluca A.; Brucato, Valerio; La Carrubba, Vincenzo

    2015-12-01

    To study the optical properties of polymeric samples, an experimental apparatus was designed on purpose and set up. The sample is a thin film enclosed between two glass slides and a PTFE frame, with a very thin thermocouple placed on sample for direct temperature measurement. This sample holder was placed between two aluminum slabs, equipped with a narrow slit for optical measurements and with electrical resistances for temperature control. Sample was enlightened by a laser diode, whereas transmitted light was detected with a photodiode. Measurements were carried out on polyethylene-terephtalate (PET) and two different polyamides, tested as pure polymers and blends. The thermal history imposed to the sample consisted in a rapid heating from ambient temperature to a certain temperature below the melting point, a stabilization period, and then a heating at constant rate. After a second stabilization period, the sample was cooled. The data obtained were compared with DSC measurements performed with the same thermal history. In correspondence with transitions detected via DSC (e.g. melting, crystallization and cold crystallization), the optical signal showed a steep variation. In particular, crystallization resulted in a rapid decrease of transmitted light, whereas melting gave up an increase of light transmitted by the sample. Further variations in transmitted light were recorded for blends, after melting: those results may be related to other phase transitions, e.g. liquid-liquid phase separation. All things considered, the apparatus can be used to get reliable data on phase transitions in polymeric systems.

  19. Far-Field Spectroscopy and Near-Field Optical Imaging of Coupled Plasmon-Phonon Polaritons in 2D van der Waals Heterostructures.

    PubMed

    Yang, Xiaoxia; Zhai, Feng; Hu, Hai; Hu, Debo; Liu, Ruina; Zhang, Shunping; Sun, Mengtao; Sun, Zhipei; Chen, Jianing; Dai, Qing

    2016-04-20

    A new hybridized plasmon-phonon polariton mode in graphene/h-BN van der Waals heterostructures is presented, featuring the ultrahigh field confinement characteristic of the graphene plasmon and the long lifetime property of the h-BN transverse optical phonon. This enables an ultralong hybrid plasmon lifetime of up to 1.6 ps (with ultrahigh mode confinement up to >l0(2)/7000 and ultrasmall group velocity down to 0.001c, where c is the speed of light in vacuum), superior to any localized plasmon ever demonstrated.

  20. Computation of three-phase capillary entry pressures and arc menisci configurations in pore geometries from 2D rock images: A combinatorial approach

    NASA Astrophysics Data System (ADS)

    Zhou, Yingfang; Helland, Johan Olav; Hatzignatiou, Dimitrios G.

    2014-07-01

    We present a semi-analytical, combinatorial approach to compute three-phase capillary entry pressures for gas invasion into pore throats with constant cross-sections of arbitrary shapes that are occupied by oil and/or water. For a specific set of three-phase capillary pressures, geometrically allowed gas/oil, oil/water and gas/water arc menisci are determined by moving two circles in opposite directions along the pore/solid boundary for each fluid pair such that the contact angle is defined at the front circular arcs. Intersections of the two circles determine the geometrically allowed arc menisci for each fluid pair. The resulting interfaces are combined systematically to allow for all geometrically possible three-phase configuration changes. The three-phase extension of the Mayer and Stowe - Princen method is adopted to calculate capillary entry pressures for all determined configuration candidates, from which the most favorable gas invasion configuration is determined. The model is validated by comparing computed three-phase capillary entry pressures and corresponding fluid configurations with analytical solutions in idealized triangular star-shaped pores. It is demonstrated that the model accounts for all scenarios that have been analyzed previously in these shapes. Finally, three-phase capillary entry pressures and associated fluid configurations are computed in throat cross-sections extracted from segmented SEM images of Bentheim sandstone. The computed gas/oil capillary entry pressures account for the expected dependence of oil/water capillary pressure in spreading and non-spreading fluid systems at the considered wetting conditions. Because these geometries are irregular and include constrictions, we introduce three-phase displacements that have not been identified previously in pore-network models that are based on idealized pore shapes. However, in the limited number of pore geometries considered in this work, we find that the favorable displacements are

  1. Small phase pattern 2D beam steering and a single LCOS design of 40 1 × 12 stacked wavelength selective switches.

    PubMed

    Yang, Haining; Robertson, Brian; Wilkinson, Peter; Chu, Daping

    2016-05-30

    Two-dimensional beam steering by small, square, phase patterns as small as 50 × 50 pixels on a phase-only liquid crystal on silicon (LCOS) device is experimentally verified as suitable for the application of wavelength selective switches (WSSs), in terms of the diffraction efficiency and steering accuracy. This enables a proposed highly functional and versatile stacked switch architecture, where 40 independent 1 × 12 WSSs can be realised on a single 4k LCOS device. They can be configured to support a 1 × N WSSs with N≤144, or an N × N wavelength crossconnect with N≤12.

  2. Phase-sensitive correlation optical time-domain reflectometer using quantum phase noise of laser light.

    PubMed

    Arias, A; Shlyagin, M G; Miridonov, S V; Manuel, Rodolfo Martinez

    2015-11-16

    We propose and experimentally demonstrate a simple approach to realize a phase-sensitive correlation optical time-domain reflectometer (OTDR) suitable for detection and localization of dynamic perturbations along a single-mode optical fiber. It is based on the quantum phase fluctuations of a coherent light emitted by a telecom DFB diode laser. Truly random probe signals are generated by an interferometer with the optical path difference exceeding the coherence length of the laser light. Speckle-like OTDR traces were obtained by calculating cross-correlation functions between the probe light and the light intensity signals returned back from the sensing fiber. Perturbations are detected and localized by monitoring time variations of correlation amplitude along the fiber length. Results of proof-of-concept experimental testing are presented using an array of ultra-low-reflectivity fiber Bragg gratings as weak reflectors.

  3. Nonlinear Optics Technology. Phase 3. Volume 2. Phase Conjugated Optical Communication Link

    DTIC Science & Technology

    1991-01-12

    periscope; I = 1 cm photodiode; PS =position sensing photodiode; RA -- transponder aperture; c -- camera; SM =steering mirrors; 4W = sodium vapor/ four wave...conjugation, four wave mixing, coherent detecti automatic racking and pointing, holographlc correction, mod 19 ABSTRACT ILollniue on reverse if...km four wave mixing (FWM) PC optical comm link propagating through the atmosphere was demonstrated and characterized over a range of atmospheric

  4. Phase-resolved acoustic radiation force optical coherence elastography.

    PubMed

    Qi, Wenjuan; Chen, Ruimin; Chou, Lidek; Liu, Gangjun; Zhang, Jun; Zhou, Qifa; Chen, Zhongping

    2012-11-01

    Many diseases involve changes in the biomechanical properties of tissue, and there is a close correlation between tissue elasticity and pathology. We report on the development of a phase-resolved acoustic radiation force optical coherence elastography method (ARF-OCE) to evaluate the elastic properties of tissue. This method utilizes chirped acoustic radiation force to produce excitation along the sample's axial direction, and it uses phase-resolved optical coherence tomography (OCT) to measure the vibration of the sample. Under 500-Hz square wave modulated ARF signal excitation, phase change maps of tissue mimicking phantoms are generated by the ARF-OCE method, and the resulting Young's modulus ratio is correlated with a standard compression test. The results verify that this technique could efficiently measure sample elastic properties accurately and quantitatively. Furthermore, a three-dimensional ARF-OCE image of the human atherosclerotic coronary artery is obtained. The result indicates that our dynamic phase-resolved ARF-OCE method can delineate tissues with different mechanical properties.

  5. Brittle damage models in DYNA2D

    SciTech Connect

    Faux, D.R.

    1997-09-01

    DYNA2D is an explicit Lagrangian finite element code used to model dynamic events where stress wave interactions influence the overall response of the system. DYNA2D is often used to model penetration problems involving ductile-to-ductile impacts; however, with the advent of the use of ceramics in the armor-anti-armor community and the need to model damage to laser optics components, good brittle damage models are now needed in DYNA2D. This report will detail the implementation of four brittle damage models in DYNA2D, three scalar damage models and one tensor damage model. These new brittle damage models are then used to predict experimental results from three distinctly different glass damage problems.

  6. 2D/3D switchable displays

    NASA Astrophysics Data System (ADS)

    Dekker, T.; de Zwart, S. T.; Willemsen, O. H.; Hiddink, M. G. H.; IJzerman, W. L.

    2006-02-01

    A prerequisite for a wide market acceptance of 3D displays is the ability to switch between 3D and full resolution 2D. In this paper we present a robust and cost effective concept for an auto-stereoscopic switchable 2D/3D display. The display is based on an LCD panel, equipped with switchable LC-filled lenticular lenses. We will discuss 3D image quality, with the focus on display uniformity. We show that slanting the lenticulars in combination with a good lens design can minimize non-uniformities in our 20" 2D/3D monitors. Furthermore, we introduce fractional viewing systems as a very robust concept to further improve uniformity in the case slanting the lenticulars and optimizing the lens design are not sufficient. We will discuss measurements and numerical simulations of the key optical characteristics of this display. Finally, we discuss 2D image quality, the switching characteristics and the residual lens effect.

  7. Phase diagram of electronic systems with quadratic Fermi nodes in 2 <d <4 : 2 +ɛ expansion, 4 -ɛ expansion, and functional renormalization group

    NASA Astrophysics Data System (ADS)

    Janssen, Lukas; Herbut, Igor F.

    2017-02-01

    Several materials in the regime of strong spin-orbit interaction such as HgTe, the pyrochlore iridate Pr2Ir2O7 , and the half-Heusler compound LaPtBi, as well as various systems related to these three prototype materials, are believed to host a quadratic band touching point at the Fermi level. Recently, it has been proposed that such a three-dimensional gapless state is unstable to a Mott-insulating ground state at low temperatures when the number of band touching points N at the Fermi level is smaller than a certain critical number Nc. We further substantiate and quantify this scenario by various approaches. Using ɛ expansion near two spatial dimensions, we show that Nc=64 /(25 ɛ2) +O (1 /ɛ ) and demonstrate that the instability for N 2 <d <4 . Directly in d =3 we therewith find Nc=1.86 , and thus again above the physical N =1 . All these results are consistent with the prediction that the interacting ground state of pure, unstrained HgTe, and possibly also Pr2Ir2O7 , is a strong topological insulator with a dynamically generated gap—a topological Mott insulator.

  8. Modal-based phase retrieval for adaptive optics.

    PubMed

    Antonello, Jacopo; Verhaegen, Michel

    2015-06-01

    We consider using phase retrieval (PR) to correct phase aberrations in an optical system. Three measurements of the point-spread function (PSF) are collected to estimate an aberration. For each measurement, a different defocus aberration is applied with a deformable mirror (DM). Once the aberration is estimated using a PR algorithm, we apply the aberration correction with the DM, and measure the residual aberration using a Shack-Hartmann wavefront sensor. The extended Nijboer-Zernike theory is used for modelling the PSF. The PR problem is solved using both an algorithm called PhaseLift, which is based on matrix rank minimization, and another algorithm based on alternating projections. For comparison, we include the results achieved using a classical PR algorithm, which is based on alternating projections and uses the fast Fourier transform.

  9. Optical Sensor for Characterizing the Phase Transition in Salted Solutions

    PubMed Central

    Claverie, Rémy; Fontana, Marc D.; Duričković, Ivana; Bourson, Patrice; Marchetti, Mario; Chassot, Jean-Marie

    2010-01-01

    We propose a new optical sensor to characterize the solid-liquid phase transition in salted solutions. The probe mainly consists of a Raman spectrometer that extracts the vibrational properties from the light scattered by the salty medium. The spectrum of the O – H stretching band was shown to be strongly affected by the introduction of NaCl and the temperature change as well. A parameter SD defined as the ratio of the integrated intensities of two parts of this band allows to study the temperature and concentration dependences of the phase transition. Then, an easy and efficient signal processing and the exploitation of a modified Boltzmann equation give information on the phase transition. Validations were done on solutions with varying concentration of NaCl. PMID:22319327

  10. Optical image encryption technique based on deterministic phase masks

    NASA Astrophysics Data System (ADS)

    Zamrani, Wiam; Ahouzi, Esmail; Lizana, Angel; Campos, Juan; Yzuel, María J.

    2016-10-01

    The double-random phase encoding (DRPE) scheme, which is based on a 4f optical correlator system, is considered as a reference for the optical encryption field. We propose a modification of the classical DRPE scheme based on the use of a class of structured phase masks, the deterministic phase masks. In particular, we propose to conduct the encryption process by using two deterministic phase masks, which are built from linear combinations of several subkeys. For the decryption step, the input image is retrieved by using the complex conjugate of the deterministic phase masks, which were set in the encryption process. This concept of structured masks gives rise to encryption-decryption keys which are smaller and more compact than those required in the classical DRPE. In addition, we show that our method significantly improves the tolerance of the DRPE method to shifts of the decrypting phase mask-when no shift is applied, it provides similar performance to the DRPE scheme in terms of encryption-decryption results. This enhanced tolerance to the shift, which is proven by providing numerical simulation results for grayscale and binary images, may relax the rigidity of an encryption-decryption experimental implementation setup. To evaluate the effectiveness of the described method, the mean-square-error and the peak signal-to-noise ratio between the input images and the recovered images are calculated. Different studies based on simulated data are also provided to highlight the suitability and robustness of the method when applied to the image encryption-decryption processes.

  11. High-speed 32×32 MEMS optical phased array

    NASA Astrophysics Data System (ADS)

    Megens, Mischa; Yoo, Byung-Wook; Chan, Trevor; Yang, Weijian; Sun, Tianbo; Chang-Hasnain, Connie J.; Wu, Ming C.; Horsley, David A.

    2014-03-01

    Optical phased arrays (OPAs) with fast response time are of great interest for various applications such as displays, free space optical communications, and lidar. Existing liquid crystal OPAs have millisecond response time and small beam steering angle. Here, we report on a novel 32×32 MEMS OPA with fast response time (<4 microseconds), large field of view (+/-2°), and narrow beam divergence (0.1°). The OPA is composed of high-contrast grating (HCG) mirrors which function as phase shifters. Relative to beam steering systems based on a single rotating MEMS mirror, which are typically limited to bandwidths below 50 kHz, the MEMS OPA described here has the advantage of greatly reduced mass and therefore achieves a bandwidth over 500 kHz. The OPA is fabricated using deep UV lithography to create submicron mechanical springs and electrical interconnects, enabling a high (85%) fill-factor. Each HCG mirror is composed of only a single layer of polysilicon and achieves >99% reflectivity through the use of a subwavelength grating patterned into the mirror's polysilicon surface. Conventional metal-coated MEMS mirrors must be thick (1- 50 μm) to prevent warpage arising from thermal and residual stress. The single material construction used here results in a high degree of flatness even in a thin 400 nm HCG mirror. Beam steering is demonstrated using binary phase patterns and is accomplished with the help of a closed-loop phase control system based on a phase-shifting interferometer that provides in-situ measurement of the phase shift of each mirror in the array.

  12. Enabling Technologies for Direct Detection Optical Phase Modulation Formats

    NASA Astrophysics Data System (ADS)

    Xu, Xian

    Phase modulation formats are believed to be one of the key enabling techniques for next generation high speed long haul fiber-optic communication systems due to the following main advantages: (1) with a balanced detection, a better receiver sensitivity over conventional intensity modulation formats, e.g., a ˜3-dB sensitivity improvement using differential phase shift keying (DPSK) and a ˜1.3-dB sensitivity improvement using differential quadrature phase shift keying (DQPSK); (2) excellent robustness against fiber nonlinearities; (3) high spectrum efficiency when using multilevel phase modulation formats, such as DQPSK. As the information is encoded in the phase of the optical field, the phase modulation formats are sensitive to the phase-related impairments and the deterioration induced in the phase-intensity conversion. This consequently creates new challenging issues. The research objective of this thesis is to depict some of the challenging issues and provide possible solutions. The first challenge is the cross-phase modulation (XPM) penalty for the phase modulated channels co-propagating with the intensity modulated channels. The penalty comes from the pattern dependent intensity fluctuations of the neighboring intensity modulated channels being converted into phase noise in the phase modulation channels. We propose a model to theoretically analyze the XPM penalty dependence on the walk off effect. From this model, we suggest that using fibers with large local dispersion or intentionally introducing some residual dispersion per span would help mitigate the XPM penalty. The second challenge is the polarization dependent frequency shift (PDf) induced penalty during the phase-intensity conversion. The direct detection DPSK is usually demodulated in a Mach-Zehnder delay interferometer (DI). The polarization dependence of DI introduces a PDf causing a frequency offset between the laser's frequency and the transmissivity peak of DI, degrading the demodulated DPSK

  13. Analytical solutions for the equations of motion of a space vehicle during the atmospheric re-entry phase on a 2-D trajectory

    NASA Astrophysics Data System (ADS)

    Mititelu, Gabriel

    2009-04-01

    A practical and important problem encountered during the atmospheric re-entry phase is to determine analytical solutions for the space vehicle dynamical equations of motion. The author proposes new solutions for the equations of trajectory and flight-path angle of the space vehicle during the re-entry phase in Earth’s atmosphere. Explicit analytical solutions for the aerodynamic equations of motion can be effectively applied to investigate and control the rocket flight characteristics. Setting the initial conditions for the speed, re-entering flight-path angle, altitude, atmosphere density, lift and drag coefficients, the nonlinear differential equations of motion are linearized by a proper choice of the re-entry range angles. After integration, the solutions are expressed with the Exponential Integral, and Generalized Exponential Integral functions. Theoretical frameworks for proposed solutions as well as, several numerical examples, are presented.

  14. Highly integrated optical heterodyne phase-locked loop with phase/frequency detection.

    PubMed

    Lu, Mingzhi; Park, Hyunchul; Bloch, Eli; Sivananthan, Abirami; Bhardwaj, Ashish; Griffith, Zach; Johansson, Leif A; Rodwell, Mark J; Coldren, Larry A

    2012-04-23

    A highly-integrated optical phase-locked loop with a phase/frequency detector and a single-sideband mixer (SSBM) has been proposed and demonstrated for the first time. A photonic integrated circuit (PIC) has been designed, fabricated and tested, together with an electronic IC (EIC). The PIC integrates a widely-tunable sampled-grating distributed-Bragg-reflector laser, an optical 90 degree hybrid and four high-speed photodetectors on the InGaAsP/InP platform. The EIC adds a single-sideband mixer, and a digital phase/frequency detector, to provide single-sideband heterodyne locking from -9 GHz to 7.5 GHz. The loop bandwith is 400 MHz.

  15. Optical Diagnostic System for Solar Sails: Phase 1 Final Report

    NASA Technical Reports Server (NTRS)

    Pappa, Richard S.; Blandino, Joseph R.; Caldwell, Douglas W.; Carroll, Joseph A.; Jenkins, Christopher H. M.; Pollock, Thomas C.

    2004-01-01

    NASA's In-Space Propulsion program recently selected AEC-ABLE Engineering and L'Garde, Inc. to develop scale-model solar sail hardware and demonstrate its functionality on the ground. Both are square sail designs with lightweight diagonal booms (<100 g/m) and ultra-thin membranes (<10 g/sq m). To support this technology, the authors are developing an integrated diagnostics instrumentation package for monitoring solar sail structures such as these in a near-term flight experiment. We refer to this activity as the "Optical Diagnostic System (ODS) for Solar Sails" project. The approach uses lightweight optics and photogrammetric techniques to measure solar sail membrane and boom shape and dynamics, thermography to map temperature, and non-optical sensors including MEMS accelerometers and load cells. The diagnostics package must measure key structural characteristics including deployment dynamics, sail support tension, boom and sail deflection, boom and sail natural frequencies, sail temperature, and sail integrity. This report summarizes work in the initial 6-month Phase I period (conceptual design phase) and complements the final presentation given in Huntsville, AL on January 14, 2004.

  16. Assessing 2D electrophoretic mobility spectroscopy (2D MOSY) for analytical applications.

    PubMed

    Fang, Yuan; Yushmanov, Pavel V; Furó, István

    2016-12-08

    Electrophoretic displacement of charged entity phase modulates the spectrum acquired in electrophoretic NMR experiments, and this modulation can be presented via 2D FT as 2D mobility spectroscopy (MOSY) spectra. We compare in various mixed solutions the chemical selectivity provided by 2D MOSY spectra with that provided by 2D diffusion-ordered spectroscopy (DOSY) spectra and demonstrate, under the conditions explored, a superior performance of the former method. 2D MOSY compares also favourably with closely related LC-NMR methods. The shape of 2D MOSY spectra in complex mixtures is strongly modulated by the pH of the sample, a feature that has potential for areas such as in drug discovery and metabolomics. Copyright © 2016 The Authors. Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd. StartCopTextCopyright © 2016 The Authors. Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd.

  17. 2D and 3D imaging of the gas phase close to an operating model catalyst by planar laser induced fluorescence

    NASA Astrophysics Data System (ADS)

    Blomberg, Sara; Zhou, Jianfeng; Gustafson, Johan; Zetterberg, Johan; Lundgren, Edvin

    2016-11-01

    In recent years, efforts have been made in catalysis related surface science studies to explore the possibilities to perform experiments at conditions closer to those of a technical catalyst, in particular at increased pressures. Techniques such as high pressure scanning tunneling/atomic force microscopy (HPSTM/AFM), near ambient pressure x-ray photoemission spectroscopy (NAPXPS), surface x-ray diffraction (SXRD) and polarization-modulation infrared reflection absorption spectroscopy (PM-IRAS) at semi-realistic conditions have been used to study the surface structure of model catalysts under reaction conditions, combined with simultaneous mass spectrometry (MS). These studies have provided an increased understanding of the surface dynamics and the structure of the active phase of surfaces and nano particles as a reaction occurs, providing novel information on the structure/activity relationship. However, the surface structure detected during the reaction is sensitive to the composition of the gas phase close to the catalyst surface. Therefore, the catalytic activity of the sample itself will act as a gas-source or gas-sink, and will affect the surface structure, which in turn may complicate the assignment of the active phase. For this reason, we have applied planar laser induced fluorescence (PLIF) to the gas phase in the vicinity of an active model catalysts. Our measurements demonstrate that the gas composition differs significantly close to the catalyst and at the position of the MS, which indeed should have a profound effect on the surface structure. However, PLIF applied to catalytic reactions presents several beneficial properties in addition to investigate the effect of the catalyst on the effective gas composition close to the model catalyst. The high spatial and temporal resolution of PLIF provides a unique tool to visualize the on-set of catalytic reactions and to compare different model catalysts in the same reactive environment. The technique can be

  18. 2D and 3D imaging of the gas phase close to an operating model catalyst by planar laser induced fluorescence.

    PubMed

    Blomberg, Sara; Zhou, Jianfeng; Gustafson, Johan; Zetterberg, Johan; Lundgren, Edvin

    2016-11-16

    In recent years, efforts have been made in catalysis related surface science studies to explore the possibilities to perform experiments at conditions closer to those of a technical catalyst, in particular at increased pressures. Techniques such as high pressure scanning tunneling/atomic force microscopy (HPSTM/AFM), near ambient pressure x-ray photoemission spectroscopy (NAPXPS), surface x-ray diffraction (SXRD) and polarization-modulation infrared reflection absorption spectroscopy (PM-IRAS) at semi-realistic conditions have been used to study the surface structure of model catalysts under reaction conditions, combined with simultaneous mass spectrometry (MS). These studies have provided an increased understanding of the surface dynamics and the structure of the active phase of surfaces and nano particles as a reaction occurs, providing novel information on the structure/activity relationship. However, the surface structure detected during the reaction is sensitive to the composition of the gas phase close to the catalyst surface. Therefore, the catalytic activity of the sample itself will act as a gas-source or gas-sink, and will affect the surface structure, which in turn may complicate the assignment of the active phase. For this reason, we have applied planar laser induced fluorescence (PLIF) to the gas phase in the vicinity of an active model catalysts. Our measurements demonstrate that the gas composition differs significantly close to the catalyst and at the position of the MS, which indeed should have a profound effect on the surface structure. However, PLIF applied to catalytic reactions presents several beneficial properties in addition to investigate the effect of the catalyst on the effective gas composition close to the model catalyst. The high spatial and temporal resolution of PLIF provides a unique tool to visualize the on-set of catalytic reactions and to compare different model catalysts in the same reactive environment. The technique can be

  19. Electro-optic delay oscillator with nonlocal nonlinearity: Optical phase dynamics, chaos, and synchronization.

    PubMed

    Lavrov, Roman; Peil, Michael; Jacquot, Maxime; Larger, Laurent; Udaltsov, Vladimir; Dudley, John

    2009-08-01

    We demonstrate experimentally how nonlinear optical phase dynamics can be generated with an electro-optic delay oscillator. The presented architecture consists of a linear phase modulator, followed by a delay line, and a differential phase-shift keying demodulator (DPSK-d). The latter represents the nonlinear element of the oscillator effecting a nonlinear transformation. This nonlinearity is considered as nonlocal in time since it is ruled by an intrinsic differential delay, which is significantly greater than the typical phase variations. To study the effect of this specific nonlinearity, we characterize the dynamics in terms of the dependence of the relevant feedback gain parameter. Our results reveal the occurrence of regular GHz oscillations (approximately half of the DPSK-d free spectral range), as well as a pronounced broadband phase-chaotic dynamics. Beyond this, the observed dynamical phenomena offer potential for applications in the field of microwave photonics and, in particular, for the realization of novel chaos communication systems. High quality and broadband phase-chaos synchronization is also reported with an emitter-receiver pair of the setup.

  20. High Dynamics and Precision Optical Measurement Using a Position Sensitive Detector (PSD) in Reflection-Mode: Application to 2D Object Tracking over a Smart Surface

    PubMed Central

    Ivan, Ioan Alexandru; Ardeleanu, Mihai; Laurent, Guillaume J.

    2012-01-01

    When related to a single and good contrast object or a laser spot, position sensing, or sensitive, detectors (PSDs) have a series of advantages over the classical camera sensors, including a good positioning accuracy for a fast response time and very simple signal conditioning circuits. To test the performance of this kind of sensor for microrobotics, we have made a comparative analysis between a precise but slow video camera and a custom-made fast PSD system applied to the tracking of a diffuse-reflectivity object transported by a pneumatic microconveyor called Smart-Surface. Until now, the fast system dynamics prevented the full control of the smart surface by visual servoing, unless using a very expensive high frame rate camera. We have built and tested a custom and low cost PSD-based embedded circuit, optically connected with a camera to a single objective by means of a beam splitter. A stroboscopic light source enhanced the resolution. The obtained results showed a good linearity and a fast (over 500 frames per second) response time which will enable future closed-loop control by using PSD. PMID:23223078

  1. High dynamics and precision optical measurement using a position sensitive detector (PSD) in reflection-mode: application to 2D object tracking over a Smart Surface.

    PubMed

    Ivan, Ioan Alexandru; Ardeleanu, Mihai; Laurent, Guillaume J

    2012-12-06

    When related to a single and good contrast object or a laser spot, position sensing, or sensitive, detectors (PSDs) have a series of advantages over the classical camera sensors, including a good positioning accuracy for a fast response time and very simple signal conditioning circuits. To test the performance of this kind of sensor for microrobotics, we have made a comparative analysis between a precise but slow video camera and a custom-made fast PSD system applied to the tracking of a diffuse-reflectivity object transported by a pneumatic microconveyor called Smart-Surface. Until now, the fast system dynamics prevented the full control of the smart surface by visual servoing, unless using a very expensive high frame rate camera. We have built and tested a custom and low cost PSD-based embedded circuit, optically connected with a camera to a single objective by means of a beam splitter. A stroboscopic light source enhanced the resolution. The obtained results showed a good linearity and a fast (over 500 frames per second) response time which will enable future closed-loop control by using PSD.

  2. Real-time phase-resolved functional optical coherence tomography by use of optical Hilbert transformation

    NASA Astrophysics Data System (ADS)

    Zhao, Yonghua; Chen, Zhongping; Ding, Zhihua; Ren, Hongwu; Nelson, J. Stuart

    2002-01-01

    We have developed a novel real-time phase-resolved functional optical coherence tomography system that uses optical Hilbert transformation. When we use a resonant scanner in the reference arm of the interferometer, with an axial scanning speed of 4 kHz, the frame rate of both structural and Doppler blood-flow imaging with a size of 100 by 100 pixels is 10 Hz. The system has high sensitivity and a larger dynamic range for measuring the Doppler frequency shift that is due to moving red blood cells. Real-time images of in vivo blood flow in human skin obtained with this interferometer are presented.

  3. Focusing through dynamic tissue with millisecond digital optical phase conjugation

    PubMed Central

    Wang, Daifa; Zhou, Edward Haojiang; Brake, Joshua; Ruan, Haowen; Jang, Mooseok; Yang, Changhuei

    2015-01-01

    Digital optical phase conjugation (DOPC) is a new technique employed in wavefront shaping and phase conjugation for focusing light through or within scattering media such as biological tissues. DOPC is particularly attractive as it intrinsically achieves a high fluence reflectivity in comparison to nonlinear optical approaches. However, the slow refresh rate of liquid crystal spatial light modulators and limitations imposed by computer data transfer speeds have thus far made it difficult for DOPC to achieve a playback latency of shorter than ~200 ms and, therefore, prevented DOPC from being practically applied to thick living samples. In this paper, we report a novel DOPC system that is capable of 5.3 ms playback latency. This speed improvement of almost 2 orders of magnitude is achieved by using a digital micromirror device, field programmable gate array (FPGA) processing, and a single-shot binary phase retrieval technique. With this system, we are able to focus through 2.3 mm living mouse skin with blood flowing through it (decorrelation time ~30 ms) and demonstrate that the focus can be maintained indefinitely—an important technological milestone that has not been previously reported, to the best of our knowledge. PMID:26677458

  4. Comparison of electrical and optical characteristics in gas-phase and gas-liquid phase discharges

    NASA Astrophysics Data System (ADS)

    Qazi, H. I. A.; Nie, Qiu-Yue; Li, He-Ping; Zhang, Xiao-Fei; Bao, Cheng-Yu

    2015-12-01

    This paper presents an AC-excited argon discharge generated using a gas-liquid (two-phase) hybrid plasma reactor, which mainly consists of a powered needle electrode enclosed in a conical quartz tube and grounded deionized water electrode. The discharges in the gas-phase, as well as in the two-phase, exhibit two discharge modes, i.e., the low current glow-like diffuse mode and the high current streamer-like constrict mode, with a mode transition, which exhibits a negative resistance of the discharges. The optical emission spectral analysis shows that the stronger diffusion of the water vapor into the discharge region in the two-phase discharges boosts up the generation of OH (A-X) radicals, and consequently, leads to a higher rotational temperature in the water-phase plasma plume than that of the gas-phase discharges. Both the increase of the power input and the decrease of the argon flow rate result in the increase of the rotational temperature in the plasma plume of the water-phase discharge. The stable two-phase discharges with a long plasma plume in the water-phase under a low power input and gas flow rate may show a promising prospect for the degradation of organic pollutants, e.g., printing and dyeing wastewater, in the field of environmental protection.

  5. Comparison of electrical and optical characteristics in gas-phase and gas-liquid phase discharges

    SciTech Connect

    Qazi, H. I. A.; Li, He-Ping Zhang, Xiao-Fei; Bao, Cheng-Yu; Nie, Qiu-Yue

    2015-12-15

    This paper presents an AC-excited argon discharge generated using a gas-liquid (two-phase) hybrid plasma reactor, which mainly consists of a powered needle electrode enclosed in a conical quartz tube and grounded deionized water electrode. The discharges in the gas-phase, as well as in the two-phase, exhibit two discharge modes, i.e., the low current glow-like diffuse mode and the high current streamer-like constrict mode, with a mode transition, which exhibits a negative resistance of the discharges. The optical emission spectral analysis shows that the stronger diffusion of the water vapor into the discharge region in the two-phase discharges boosts up the generation of OH (A–X) radicals, and consequently, leads to a higher rotational temperature in the water-phase plasma plume than that of the gas-phase discharges. Both the increase of the power input and the decrease of the argon flow rate result in the increase of the rotational temperature in the plasma plume of the water-phase discharge. The stable two-phase discharges with a long plasma plume in the water-phase under a low power input and gas flow rate may show a promising prospect for the degradation of organic pollutants, e.g., printing and dyeing wastewater, in the field of environmental protection.

  6. Evolution of molecular crystal optical phonons near structural phase transitions

    NASA Astrophysics Data System (ADS)

    Michki, Nigel; Niessen, Katherine; Xu, Mengyang; Markelz, Andrea

    Molecular crystals are increasingly important photonic and electronic materials. For example organic semiconductors are lightweight compared to inorganic semiconductors and have inexpensive scale up processing with roll to roll printing. However their implementation is limited by their environmental sensitivity, in part arising from the weak intermolecular interactions of the crystal. These weak interactions result in optical phonons in the terahertz frequency range. We examine the evolution of intermolecular interactions near structural phase transitions by measuring the optical phonons as a function of temperature and crystal orientation using terahertz time-domain spectroscopy. The measured orientation dependence of the resonances provides an additional constraint for comparison of the observed spectra with the density functional calculations, enabling us to follow specific phonon modes. We observe crystal reorganization near 350 K for oxalic acid as it transforms from dihydrate to anhydrous form. We also report the first THz spectra for the molecular crystal fructose through its melting point.

  7. Monolithically integrated heterodyne optical phase-lock loop with RF XOR phase detector.

    PubMed

    Steed, Robert J; Pozzi, Francesca; Fice, Martyn J; Renaud, Cyril C; Rogers, David C; Lealman, Ian F; Moodie, David G; Cannard, Paul J; Lynch, Colm; Johnston, Lilianne; Robertson, Michael J; Cronin, Richard; Pavlovic, Leon; Naglic, Luka; Vidmar, Matjaz; Seeds, Alwyn J

    2011-10-10

    We present results for an heterodyne optical phase-lock loop (OPLL), monolithically integrated on InP with external phase detector and loop filter, which phase locks the integrated laser to an external source, for offset frequencies tuneable between 0.6 GHz and 6.1 GHz. The integrated semiconductor laser emits at 1553 nm with 1.1 MHz linewidth, while the external laser has a linewidth less than 150 kHz. To achieve high quality phase locking with lasers of these linewidths, the loop delay has been made less than 1.8 ns. Monolithic integration reduces the optical path delay between the laser and photodiode to less than 20 ps. The electronic part of the OPLL was implemented using a custom-designed feedback circuit with a propagation delay of ~1 ns and an open-loop bandwidth greater than 1 GHz. The heterodyne signal between the locked slave laser and master laser has phase noise below -90 dBc/Hz for frequency offsets greater than 20 kHz and a phase error variance in 10 GHz bandwidth of 0.04 rad2.

  8. Synthetic phase-shifting for optical testing: Point-diffraction interferometry without null optics or phase shifters

    PubMed Central

    Park, Ryeojin; Kim, Dae Wook; Barrett, Harrison H.

    2013-01-01

    An innovative iterative search method called the synthetic phase-shifting (SPS) algorithm is proposed. This search algorithm is used for maximum-likelihood (ML) estimation of a wavefront that is described by a finite set of Zernike Fringe polynomials. In this paper, we estimate the coefficient, or parameter, values of the wavefront using a single interferogram obtained from a point-diffraction interferometer (PDI). In order to find the estimates, we first calculate the squared-difference between the measured and simulated interferograms. Under certain assumptions, this squared-difference image can be treated as an interferogram showing the phase difference between the true wavefront deviation and simulated wavefront deviation. The wavefront deviation is the difference between the reference and the test wavefronts. We calculate the phase difference using a traditional phase-shifting technique without physical phase-shifters. We present a detailed forward model for the PDI interferogram, including the effect of the finite size of a detector pixel. The algorithm was validated with computational studies and its performance and constraints are discussed. A prototype PDI was built and the algorithm was also experimentally validated. A large wavefront deviation was successfully estimated without using null optics or physical phase-shifters. The experimental result shows that the proposed algorithm has great potential to provide an accurate tool for non-null testing. PMID:24216862

  9. Adaptive optics fundus camera using a liquid crystal phase modulator

    NASA Astrophysics Data System (ADS)

    Yamaguchi, Tatsuo; Nakazawa, Naoki; Bessho, Kenichiro; Kitaguchi, Yoshiyuki; Maeda, Naoyuki; Fujikado, Takashi; Mihashi, Toshifumi

    2008-05-01

    We have developed an adaptive optics (AO) fundus camera to obtain high resolution retinal images of eyes. We use a liquid crystal phase modulator to compensate the aberrations of the eye for better resolution and better contrast in the images. The liquid crystal phase modulator has a wider dynamic range to compensate aberrations than most mechanical deformable mirrors and its linear phase generation makes it easy to follow eye movements. The wavefront aberration was measured in real time with a sampling rate of 10 Hz and the closed loop system was operated at around 2 Hz. We developed software tools to align consecutively obtained images. From our experiments with three eyes, the aberrations of normal eyes were reduced to less than 0.1 μm (RMS) in less than three seconds by the liquid crystal phase modulator. We confirmed that this method was adequate for measuring eyes with large aberrations including keratoconic eyes. Finally, using the liquid crystal phase modulator, high resolution images of retinas could be obtained.

  10. Optically addressed ultra-wideband phased antenna array

    NASA Astrophysics Data System (ADS)

    Bai, Jian

    Demands for high data rate and multifunctional apertures from both civilian and military users have motivated development of ultra-wideband (UWB) electrically steered phased arrays. Meanwhile, the need for large contiguous frequency is pushing operation of radio systems into the millimeter-wave (mm-wave) range. Therefore, modern radio systems require UWB performance from VHF to mm-wave. However, traditional electronic systems suffer many challenges that make achieving these requirements difficult. Several examples includes: voltage controlled oscillators (VCO) cannot provide a tunable range of several octaves, distribution of wideband local oscillator signals undergo high loss and dispersion through RF transmission lines, and antennas have very limited bandwidth or bulky sizes. Recently, RF photonics technology has drawn considerable attention because of its advantages over traditional systems, with the capability of offering extreme power efficiency, information capacity, frequency agility, and spatial beam diversity. A hybrid RF photonic communication system utilizing optical links and an RF transducer at the antenna potentially provides ultra-wideband data transmission, i.e., over 100 GHz. A successful implementation of such an optically addressed phased array requires addressing several key challenges. Photonic generation of an RF source with over a seven-octave bandwidth has been demonstrated in the last few years. However, one challenge which still remains is how to convey phased optical signals to downconversion modules and antennas. Therefore, a feed network with phase sweeping capability and low excessive phase noise needs to be developed. Another key challenge is to develop an ultra-wideband array antenna. Modern frontends require antennas to be compact, planar, and low-profile in addition to possessing broad bandwidth, conforming to stringent space, weight, cost, and power constraints. To address these issues, I will study broadband and miniaturization

  11. Magnetic-field-induced stripe order and a 2D vortex glass phase in La1.905 Ba 0.095 CuO 4

    NASA Astrophysics Data System (ADS)

    Tranquada, John; Wen, Jinsheng; Jie, Qing; Han, Su Jung; Li, Qiang; Huecker, Markus; Xu, Zhijun; Zhang, Liyuan; Gu, Genda; Zimmermann, M. V.; Singh, D. K.

    2011-03-01

    We have measured the resistivity parallel and perpendicular to the Cu O2 planes in La 1.905 Ba 0.095 Cu O4 (Tc = 32 K) as a function of perpendicular magnetic field. We have discovered a significant regime of field and temperature where the perpendicular resistivity is finite (and large) but the parallel resistivity is zero. This regime appears to correspond to a quasi-two-dimensional vortex glass phase, a state that theory predicts cannot exist at finite temperature. It seems to be stabilized by field-induced charge and spin stripe order, which we have detected with x-ray and neutron diffraction, respectively. Supported by Office of Basic Energy Sciences, US DOE, under Contract No. DE-AC02-98CH10886.

  12. Optical Properties in Non-equilibrium Phase Transitions

    SciTech Connect

    Ao, T; Ping, Y; Widmann, K; Price, D F; Lee, E; Tam, H; Springer, P T; Ng, A

    2006-01-05

    An open question about the dynamical behavior of materials is how phase transition occurs in highly non-equilibrium systems. One important class of study is the excitation of a solid by an ultrafast, intense laser. The preferential heating of electrons by the laser field gives rise to initial states dominated by hot electrons in a cold lattice. Using a femtosecond laser pump-probe approach, we have followed the temporal evolution of the optical properties of such a system. The results show interesting correlation to non-thermal melting and lattice disordering processes. They also reveal a liquid-plasma transition when the lattice energy density reaches a critical value.

  13. Preparation and detection of magnetic quantum phases in optical superlattices.

    PubMed

    Rey, A M; Gritsev, V; Bloch, I; Demler, E; Lukin, M D

    2007-10-05

    We describe a novel approach to prepare, detect, and characterize magnetic quantum phases in ultracold spinor atoms loaded in optical superlattices. Our technique makes use of singlet-triplet spin manipulations in an array of isolated double-well potentials in analogy to recently demonstrated control in quantum dots. We also discuss the many-body singlet-triplet spin dynamics arising from coherent coupling between nearest neighbor double wells and derive an effective description for such systems. We use it to study the generation of complex magnetic states by adiabatic and nonequilibrium dynamics.

  14. Solution conformation of 2-aminopurine (2-AP) dinucleotide determined by ultraviolet 2D fluorescence spectroscopy (UV-2D FS).

    PubMed

    Widom, Julia R; Johnson, Neil P; von Hippel, Peter H; Marcus, Andrew H

    2013-02-01

    We have observed the conformation-dependent electronic coupling between the monomeric subunits of a dinucleotide of 2-aminopurine (2-AP), a fluorescent analog of the nucleic acid base adenine. This was accomplished by extending two-dimensional fluorescence spectroscopy (2D FS) - a fluorescence-detected variation of 2D electronic spectroscopy - to excite molecular transitions in the ultraviolet (UV) regime. A collinear sequence of four ultrafast laser pulses centered at 323 nm was used to resonantly excite the coupled transitions of 2-AP dinucleotide. The phases of the optical pulses were continuously swept at kilohertz frequencies, and the ensuing nonlinear fluorescence was phase-synchronously detected at 370 nm. Upon optimization of a point-dipole coupling model to our data, we found that in aqueous buffer the 2-AP dinucleotide adopts an average conformation in which the purine bases are non-helically stacked (center-to-center distance R12 = 3.5 Å ± 0.5 Å, twist angle θ12 = 5° ± 5°), which differs from the conformation of such adjacent bases in duplex DNA. These experiments establish UV-2D FS as a method for examining the local conformations of an adjacent pair of fluorescent nucleotides substituted into specific DNA or RNA constructs, which will serve as a powerful probe to interpret, in structural terms, biologically significant local conformational changes within the nucleic acid framework of protein-nucleic acid complexes.

  15. Optical resolution improvement by nanoparticle's amplitude and phase pattern

    NASA Astrophysics Data System (ADS)

    Hong, Xin; Sun, Xiaoyaun

    2016-11-01

    Optical detection of nanoparticle with ultra-high sensitivity plays an important role in bio- / nano- and their relative research fields. In our recently developed method, each single particle exhibits unique 4-lobes pattern both in the amplitude and phase images respectively, based on which we explored the possibility of resolution improvement by a particle pair. In this paper two polystyrene beads at the diameter of 100nm were employed with the gap distance ranging from 100-400nm. The amplitude and phase images of the particle pair were simulated by FDTD solver. The images are sensitive to geometrical parameters of the two particles, such as gap distance and direction. The simulation results lead to a resolution of 100nm.

  16. Comparison of Three Solid Phase Materials for the Extraction of Carboxylic Acids from River Water Followed by 2D GC × GC-TOFMS Determination

    PubMed Central

    Bosire, G. O.; Ngila, J. C.; Parshotam, H.

    2016-01-01

    The extraction and determination of aliphatic and aromatic carboxylic acids as well as their influence on the aromaticity and molecularity relationship of natural organic matter (NOM) in water are reported in this study. Three solid phase extraction (SPE) sorbents were used and their extraction efficiencies evaluated after chromatographic determinations (using gas chromatography with a time of flight mass spectrometer (GC × GC-TOFMS) and liquid chromatography with organic carbon detector (LC-OCD)). More than 42 carboxylic acids were identified in raw water from the Vaal River, which feeds the Lethabo Power Generation Station, South Africa, with cooling water. The aromatic carboxylic acid efficiency (28%) was achieved by using Strata™ X SPE while the highest aliphatic carboxylic acid efficiency (92.08%) was achieved by silica SPE. The hydrophobic nature of NOM in water depends on the nature of organic compounds in water, whether aromatic or aliphatic. The LC-OCD was used to assess the hydrophobicity levels of NOM as a function of these carboxylic acids in cooling water. The LC-OCD results showed that the aromatic nature of NOM in SPE filtered water followed the order Silica>Strata X>C-18. From the results, the hydrophobicity degree of the samples depended on the type and number of carboxylic acids that were removed by the SPE cartridges. PMID:27274730

  17. Comparison of Three Solid Phase Materials for the Extraction of Carboxylic Acids from River Water Followed by 2D GC × GC-TOFMS Determination.

    PubMed

    Bosire, G O; Ngila, J C; Parshotam, H

    2016-01-01

    The extraction and determination of aliphatic and aromatic carboxylic acids as well as their influence on the aromaticity and molecularity relationship of natural organic matter (NOM) in water are reported in this study. Three solid phase extraction (SPE) sorbents were used and their extraction efficiencies evaluated after chromatographic determinations (using gas chromatography with a time of flight mass spectrometer (GC × GC-TOFMS) and liquid chromatography with organic carbon detector (LC-OCD)). More than 42 carboxylic acids were identified in raw water from the Vaal River, which feeds the Lethabo Power Generation Station, South Africa, with cooling water. The aromatic carboxylic acid efficiency (28%) was achieved by using Strata™ X SPE while the highest aliphatic carboxylic acid efficiency (92.08%) was achieved by silica SPE. The hydrophobic nature of NOM in water depends on the nature of organic compounds in water, whether aromatic or aliphatic. The LC-OCD was used to assess the hydrophobicity levels of NOM as a function of these carboxylic acids in cooling water. The LC-OCD results showed that the aromatic nature of NOM in SPE filtered water followed the order Silica>Strata X>C-18. From the results, the hydrophobicity degree of the samples depended on the type and number of carboxylic acids that were removed by the SPE cartridges.

  18. Determination of selenocysteine and selenomethionine in edible animal tissues by 2D size-exclusion reversed-phase HPLC-ICP MS following carbamidomethylation and proteolytic extraction.

    PubMed

    Bierla, Katarzyna; Dernovics, Mihaly; Vacchina, Véronique; Szpunar, Joanna; Bertin, Gérard; Lobinski, Ryszard

    2008-04-01

    A method was developed for the simultaneous determination of selenomethionine (SeMet) and selenocysteine (SeCys) in meat (chicken and lamb muscles) and different offal tissues (heart, liver, kidney). The analytical procedure was based on the protein extraction with urea under reducing conditions (dithiothreitol), derivatization of SeCys and SeMet by carbamidomethylation with iodoacetamide (IAM) followed by quantitative proteolysis. The mixture of the derivatized Se-amino acids was purified by size-exclusion liquid chromatography (LC) and analysed by ion-paring reversed-phase HPLC-inductively coupled plasma mass spectroscopy (ICP MS). The quantification of SeCys and SeMet was carried out by the method of standard additions. (77)SeMet was used to control the SeMet derivatization efficiency and recovery. The method was validated by the determination of the Se mass balance. The Se-amino acids accounted for 91 +/- 8% of the total selenium (mean of 95 samples of seven tissues analysed over a period of 18 months). The method was applied to the discrimination of the contribution of selenoproteins (containing SeCys) and other Se-containing proteins (containing SeMet) in tissues of animals during supplementation studies (dose-effect and tolerance).

  19. Tunable RF photonic phase shifter based on optical DSB modulation and FBG filtering

    NASA Astrophysics Data System (ADS)

    Wei, Yongfeng; Huang, Shanguo; Sun, Kai; Gao, Xinlu; Gu, Wanyi

    2016-01-01

    A broadband RF photonic phase shifter that can achieve the tunable phase shift with little RF amplitude variation is presented. It is based on homodyne mixing technique. The beating between phase-modulated optical carrier and the sidebands can generate RF signal with desired phase shift. Results show the RF phase shifter can achieve a continuous phase shift with low amplitude variation.

  20. Polycrystalline PLZT/ITO Ceramic Electro-Optic Phase Gratings: Electro- Optically Reconfigurable Diffractive Devices for Free-Space and In-Wafer Interconnects

    DTIC Science & Technology

    1994-09-01

    free-space and waveguide interconnects is investigated through the fabrication, testing and modeling of polycrystalline PLZT/ITO ceramic electro - optic phase...only gratings. PLZT Diffraction grating, Electro - optic diffraction grating, Optical switching, Optical interconnects, Reconfigurable interconnect

  1. Optical fiber waveguide sagnac interferometer. Phase 1: Multiturn one meter diameter, single mode. [optical gyroscopes

    NASA Technical Reports Server (NTRS)

    Vali, V.

    1977-01-01

    A rotating ring interferometer was constructed using a 100 meters of single mode optical fiber wound on a crystal cylinder. A 20 inch diameter fiber interferometer gyroscope was built and its sensitivity was evaluated. Major noise sources were identified and improvements for the next phase of development were determined. The accuracy of .01 of a fringe can be improved to .0001 by the removal of the noise source.

  2. Measurement of optical path length change following pulsed laser irradiation using differential phase optical coherence tomography.

    PubMed

    Kim, Jihoon; Oh, Junghwan; Milner, Thomas E

    2006-01-01

    Differential phase optical coherence tomography (DPOCT) is introduced to measure optical path length changes in response to pulsed laser irradiation (585 nm). An analytical equation that includes thermoelastic surface displacement and thermorefractive index change is derived to predict optical path length change in response to pulsed laser irradiation for both "confined surface" and "free surface" model systems. The derived equation is tested by comparing predicted values with data recorded from experiments using two model systems. Thermorefractive index change and the thermal expansion coefficient are deduced from differential phase change (dDeltaphi) and temperature increase (DeltaT0) measurements. The measured n(T0)beta(T0)+dndT[=1.7410(-4)+/-1.710(-6) (1K)] in the free surface experiment matches with the National Institute of Standards and Technology (NIST) data value [=1.7710(-4) (1K)]. Exclusion of lateral thermal expansion in the analytical model for the confined surface experiment causes difference between the measured dndT[=-2.310(-4)+/-7.310(-6)(1K)] and the NIST value [=-9.4510(-5) (1K)]. In spite of the difference in the confined surface experiment, results of our studies indicate DPOCT can detect dynamic optical path length change in response to pulsed laser irradiation with high sensitivity, and applications to tissue diagnostics may be possible.

  3. Towards chip-scale optical frequency synthesis based on optical heterodyne phase-locked loop.

    PubMed

    Arafin, Shamsul; Simsek, Arda; Kim, Seong-Kyun; Dwivedi, Sarvagya; Liang, Wei; Eliyahu, Danny; Klamkin, Jonathan; Matsko, Andrey; Johansson, Leif; Maleki, Lute; Rodwell, Mark; Coldren, Larry

    2017-01-23

    An integrated heterodyne optical phase-locked loop was designed and demonstrated with an indium phosphide based photonic integrated circuit and commercial off-the-shelf electronic components. As an input reference, a stable microresonator-based optical frequency comb with a 50-dB span of 25 nm (~3 THz) around 1550 nm, having a spacing of ~26 GHz, was used. A widely-tunable on-chip sampled-grating distributed-Bragg-reflector laser is offset locked across multiple comb lines. An arbitrary frequency synthesis between the comb lines is demonstrated by tuning the RF offset source, and better than 100Hz tuning resolution with ± 5 Hz accuracy is obtained. Frequency switching of the on-chip laser to a point more than two dozen comb lines away (~5.6 nm) and simultaneous locking to the corresponding nearest comb line is also achieved in a time ~200 ns. A low residual phase noise of the optical phase-locking system is successfully achieved, as experimentally verified by the value of -80 dBc/Hz at an offset of as low as 200 Hz.

  4. Demonstration of a reversible phase-insensitive optical amplifier

    SciTech Connect

    Yoshikawa, Jun-ichi; Miwa, Yoshichika; Furusawa, Akira; Filip, Radim

    2011-05-15

    We experimentally demonstrate phase-insensitive linear amplification of a continuous variable system in the optical regime, preserving the ancilla system at the output. Since our amplification operation is unitary up to small excess noise, it is reversible beyond the classical limit. Here, entanglement between the amplified output system and the ancilla system is the resource for the reversibility, and the amplification gain is G=2.0. In addition, combining this amplifier with a beamsplitter, we also demonstrate approximate cloning of coherent states where an anticlone is present. We investigate the reversibility by reconstructing the initial state from the output correlations, and the results are slightly beyond the cloning limit. Furthermore, full characterization of the amplifier and cloner is given by using coherent states with several different mean values as inputs. Our amplifier is based on linear optics, offline-prepared additional ancillas in nonclassical states, and homodyne measurements followed by feedforward. Squeezed states are used as the additional ancillas, and nonlinear optical effects are exploited only for their generation. They introduce nonclassicality into the amplifying operation, making entanglement at the output.

  5. Phase resolved digital signal processing in optical coherence tomography

    NASA Astrophysics Data System (ADS)

    de Boer, Johannes F.; Tripathi, Renu; Park, Boris H.; Nassif, Nader

    2002-06-01

    We present phase resolved digital signal processing techniques for Optical Coherence Tomography to correct for the non Gaussian shape of source spectra and for Group Delay Dispersion (GDD). A broadband source centered at 820 nm was synthesized by combining the spectra of two superluminescent diodes to improve axial image resolution in an optical coherence tomography (OCT) system. Spectral shaping was used to reduce the side lobes (ringing) in the axial point spread function due to the non-Gaussian shape of the spectra. Images of onion cells taken with each individual source and the combined sources, respectively, show the improved resolution and quality enhancement in a turbid biological sample. An OCT system operating at 1310 nm was used to demonstrate that the broadening effect of group delay dispersion (GDD) on the coherence function could be eliminated completely by introducing a quadratic phase shift in the Fourier domain of the interferometric signal. The technique is demonstrated by images of human skin grafts with group delay dispersion mismatch between sample and reference arm before and after digital processing.

  6. Phase Recovery Acceleration of Quantum-Dot Semiconductor Optical Amplifiers by Optical Pumping to Quantum-Well Wetting Layer

    NASA Astrophysics Data System (ADS)

    Kim, Jungho

    2013-11-01

    We theoretically investigate the phase recovery acceleration of quantum-dot (QD) semiconductor optical amplifiers (SOAs) by means of the optical pump injection to the quantum-well (QW) wetting layer (WL). We compare the ultrafast gain and phase recovery responses of QD SOAs in either the electrical or the optical pumping scheme by numerically solving 1088 coupled rate equations. The ultrafast gain recovery responses on the order of sub-picosecond are nearly the same for the two pumping schemes. The ultrafast phase recovery is not significantly accelerated by increasing the electrical current density, but greatly improved by increasing the optical pumping power to the QW WL. Because the phase recovery time of QD SOAs with the optical pumping scheme can be reduced down to several picoseconds, the complete phase recovery can be achieved when consecutive pulse signals with a repetition rate of 100 GHz is injected.

  7. An optically controlled phased array antenna based on single sideband polarization modulation.

    PubMed

    Zhang, Yamei; Wu, Huan; Zhu, Dan; Pan, Shilong

    2014-02-24

    A novel optically controlled phased array antenna consisting a simple optical beamforming network and an N element linear patch antenna array is proposed and demonstrated. The optical beamforming network is realized by N independent phase shifters using a shared optical single sideband (OSSB) polarization modulator together with N polarization controllers (PCs), N polarization beam splitters (PBSs) and N photodetectors (PDs). An experiment is carried out. A 4-element linear patch antenna array operating at 14 GHz and a 1 × 4 optical beamforming network (OBFN) is employed to realize the phased array antenna. The radiation patterns of the phased array antenna at -30°, 0° and 30° are achieved.

  8. Documenting the Effectiveness of Cosorption of Airborne Contaminants by a Field-Installed Active Desiccant System: Final Report - Phase 2D

    SciTech Connect

    Fischer, J

    2003-01-23

    The final report for Phase 1 of this research effort (ORNL/SUB/94-SV004/1) concluded that a significant market opportunity would exist for active desiccant systems if it could be demonstrated that they can remove a significant proportion of common airborne contaminants while simultaneously performing the primary function of dehumidifying a stream of outdoor air or recirculated building air. If the engineering community begins to follow the intent of ASHRAE Standard 62, now part of all major building codes, the outdoor air in many major cities may need to be pre-cleaned before it is introduced into occupied spaces. Common air contaminant cosorption capability would provide a solution to three important aspects of the ASHRAE 62-89 standard that have yet to be effectively addressed by heating, ventilation, and air-conditioning (HVAC) equipment manufacturers: (1) The ASHRAE standard defines acceptable outdoor air quality. If the outdoor air contains unacceptable levels of certain common outdoor air contaminants (e.g., sulfur dioxide, ozone), then the standard requires that these contaminants be removed from the outdoor air stream to reach compliance with the acceptable outdoor air quality guidelines. (2) Some engineers prefer to apply a filtration or prescriptive approach rather than a ventilation approach to solving indoor air quality problems. The ASHRAE standard recognizes this approach provided that the filtration technology exists to remove the gaseous contaminants encountered. The performance of current gaseous filtration technologies is not well documented, and they can be costly to maintain because the life of the filter is limited and the cost is high. Moreover, it is not easy to determine when the filters need changing. In such applications, an additional advantage provided by the active desiccant system would be that the same piece of equipment could control space humidity and provide filtration, even during unoccupied periods, if the active desiccant system

  9. Double-shot depth-resolved displacement field measurement using phase-contrast spectral optical coherence tomography.

    PubMed

    De la Torre-Ibarra, Manuel H; Ruiz, Pablo D; Huntley, Jonathan M

    2006-10-16

    We describe a system for measuring sub-surface displacement fields within a scattering medium using a phase contrast version of spectral Optical Coherence Tomography. The system provides displacement maps within a 2-D slice extending into the sample with a sensitivity of order 10 nm. The data for a given deformation state is recorded in a single image, potentially allowing sub-surface displacement and strain mapping of moving targets. The system is based on low cost components and has no moving parts. The theoretical basis for the system is presented along with experimental results from a simple well-controlled geometry consisting of independently-tilting glass sheets. Results are validated using standard two-beam interferometry. A modified system was used to measure through-the-thickness phase changes within a porcine cornea due to displacements produced by an increase in the intraocular pressure.

  10. Lessons learned with the Active Phasing Experiment: comparison of four optical phasing sensors on a segmented Very Large Telescope

    NASA Astrophysics Data System (ADS)

    Gonte, F.; Surdej, I.

    The adaptive optics capabilities are strongly limited by the quality of the phasing of the primary mirror of the extremely large telescope. Up to date, the Keck telescopes are the only segmented telescope phased with a quality enabling the application of adaptive optics. The Active Phasing Experiment has been installed at the Namyth focus of the Very Large Telescope Melipal during the last 6 months. Its purpose is to understand and compare different technological concepts for an optical phasing sensor dedicated to the European Extremely Large Telescope. The pupil of the telescope is segmented in 61 hexagonal segments by projecting it on an Active Segmented Mirror. The ASM is controlled by a dual wavenlength interferometer made by Fogale Nanotech with a nanometric precision. The segmented pupil is distributed in parallel to four optical phasing sensors. They are a pyramid sensor, a curvature sensor, a phase filtering sensor and a ShackHartmann sensor. They have been developed respectively by Istituto Nazionale di Astrofisica in Florenze, Instituto Astrofisica Canarias in Tenerife, Laboratoire d'Astrophysique de Marseille and ESO. The global behaviour of the optical phasing sensors will be described and preliminary results of the Active Phasing Experiments obtained on sky will be explained. The extrapolation of the results to the EELT and the potential consequences for the adaptive optics will be given. The Active Phasing Experiment has been financed by the European Union and the European Southern Observatory via the Sixth European Union Framework Program for Research and Technological Development under the contract number 011863.

  11. Application of 2D Non-Graphene Materials and 2D Oxide Nanostructures for Biosensing Technology

    PubMed Central

    Shavanova, Kateryna; Bakakina, Yulia; Burkova, Inna; Shtepliuk, Ivan; Viter, Roman; Ubelis, Arnolds; Beni, Valerio; Starodub, Nickolaj; Yakimova, Rositsa; Khranovskyy, Volodymyr

    2016-01-01

    The discovery of graphene and its unique properties has inspired researchers to try to invent other two-dimensional (2D) materials. After considerable research effort, a distinct “beyond graphene” domain has been established, comprising the library of non-graphene 2D materials. It is significant that some 2D non-graphene materials possess solid advantages over their predecessor, such as having a direct band gap, and therefore are highly promising for a number of applications. These applications are not limited to nano- and opto-electronics, but have a strong potential in biosensing technologies, as one example. However, since most of the 2D non-graphene materials have been newly discovered, most of the research efforts are concentrated on material synthesis and the investigation of the properties of the material. Applications of 2D non-graphene materials are still at the embryonic stage, and the integration of 2D non-graphene materials into devices is scarcely reported. However, in recent years, numerous reports have blossomed about 2D material-based biosensors, evidencing the growing potential of 2D non-graphene materials for biosensing applications. This review highlights the recent progress in research on the potential of using 2D non-graphene materials and similar oxide nanostructures for different types of biosensors (optical and electrochemical). A wide range of biological targets, such as glucose, dopamine, cortisol, DNA, IgG, bisphenol, ascorbic acid, cytochrome and estradiol, has been reported to be successfully detected by biosensors with transducers made of 2D non-graphene materials. PMID:26861346

  12. Application of 2D Non-Graphene Materials and 2D Oxide Nanostructures for Biosensing Technology.

    PubMed

    Shavanova, Kateryna; Bakakina, Yulia; Burkova, Inna; Shtepliuk, Ivan; Viter, Roman; Ubelis, Arnolds; Beni, Valerio; Starodub, Nickolaj; Yakimova, Rositsa; Khranovskyy, Volodymyr

    2016-02-06

    The discovery of graphene and its unique properties has inspired researchers to try to invent other two-dimensional (2D) materials. After considerable research effort, a distinct "beyond graphene" domain has been established, comprising the library of non-graphene 2D materials. It is significant that some 2D non-graphene materials possess solid advantages over their predecessor, such as having a direct band gap, and therefore are highly promising for a number of applications. These applications are not limited to nano- and opto-electronics, but have a strong potential in biosensing technologies, as one example. However, since most of the 2D non-graphene materials have been newly discovered, most of the research efforts are concentrated on material synthesis and the investigation of the properties of the material. Applications of 2D non-graphene materials are still at the embryonic stage, and the integration of 2D non-graphene materials into devices is scarcely reported. However, in recent years, numerous reports have blossomed about 2D material-based biosensors, evidencing the growing potential of 2D non-graphene materials for biosensing applications. This review highlights the recent progress in research on the potential of using 2D non-graphene materials and similar oxide nanostructures for different types of biosensors (optical and electrochemical). A wide range of biological targets, such as glucose, dopamine, cortisol, DNA, IgG, bisphenol, ascorbic acid, cytochrome and estradiol, has been reported to be successfully detected by biosensors with transducers made of 2D non-graphene materials.

  13. Electronically controlled optical beam-steering by an active phased array of metallic nanoantennas.

    PubMed

    DeRose, C T; Kekatpure, R D; Trotter, D C; Starbuck, A; Wendt, J R; Yaacobi, A; Watts, M R; Chettiar, U; Engheta, N; Davids, P S

    2013-02-25

    An optical phased array of nanoantenna fabricated in a CMOS compatible silicon photonics process is presented. The optical phased array is fed by low loss silicon waveguides with integrated ohmic thermo-optic phase shifters capable of 2π phase shift with ∼ 15 mW of applied electrical power. By controlling the electrical power to the individual integrated phase shifters fixed wavelength steering of the beam emitted normal to the surface of the wafer of 8° is demonstrated for 1 × 8 phased arrays with periods of both 6 and 9 μm.

  14. E-2D Advanced Hawkeye Aircraft (E-2D AHE)

    DTIC Science & Technology

    2015-12-01

    Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-364 E-2D Advanced Hawkeye Aircraft (E-2D AHE) As of FY 2017 President’s Budget Defense...Office Estimate RDT&E - Research, Development, Test, and Evaluation SAR - Selected Acquisition Report SCP - Service Cost Position TBD - To Be Determined

  15. Dynamical phase interferometry of cold atoms in optical lattices

    SciTech Connect

    London, Uri; Gat, Omri

    2011-12-15

    We study the propagation of cold-atom wave packets in an interferometer with a Mach-Zehnder topology based on the dynamical phase of Bloch oscillation in a weakly forced optical lattice with a narrow potential barrier that functions as a cold-atom wave-packet splitter. We calculate analytically the atomic wave function, and show that the expected number of atoms in the two outputs of the interferometer oscillates rapidly as a function of the angle between the potential barrier and the forcing direction with period proportional to the external potential difference across a lattice spacing divided by the lattice band energy scale. The interferometer can be used as a high-precision force probe whose principle of operation is different from current interferometers based on the overall position of Bloch oscillating wave packets.

  16. Core stress distribution of phase shifting multimode polymer optical fiber

    SciTech Connect

    Furukawa, Rei Matsuura, Motoharu; Nagata, Morio; Mishima, Kenji; Inoue, Azusa; Tagaya, Akihiro; Koike, Yasuhiro

    2013-11-18

    Poly-(methyl methacrylate-co-benzyl methacrylate) polarization-maintaining optical fibers are known for their high response to normal stress. In this report, responses to higher stress levels up to 0.45 MPa were investigated. The stress amplitude and direction in the fiber cross section were calculated and analyzed with a coincident mode-field obtained from the near-field pattern. The stress amplitude varies significantly in the horizontal direction and is considered to create multiple phases, explaining the measurement results. To investigate possible permanent deformation, the core yield point profile was analyzed. Although it largely exceeds the average applied stress, the calculated stress distribution indicates that the core could partially experience stress that exceeds the yield point.

  17. Phase-coupled optical diode based on PT symmetric system

    NASA Astrophysics Data System (ADS)

    Gao, Yong-Pan; Cao, Cong; Zhang, Yong; Wang, Tie-Jun; Wang, Chuan

    2017-01-01

    Here we investigate a phase-coupled parity-time symmetric plasmonic system, and theoretically achieved the all optical on-chip plasmonic diode using the coupled mode theory. The proposed symmetrical system consists of one loss cavity and one gain cavity each coupled with the waveguide, and we find that the controllable amplification of the input field can be achieved by changing the power coupling fraction between the resonators and the waveguide. Moreover, this loss-gain symmetric system could work as a frequency comb filter, and the operation on the device could be controlled by tuning the coupling strength between the two plasmonic cavities by tuning the coupling distance between the cavities and the waveguide.

  18. Linearized broadband optical detector: study and implementation of optical phase-locked loop

    NASA Astrophysics Data System (ADS)

    Murakowski, Janusz; Schneider, Garrett J.; Schuetz, Christopher A.; Shi, Shouyuan; Prather, Dennis W.

    2013-12-01

    Optical phase-locked loop (OPLL) is used to improve the linearity of an optical link for transmission of analog signals. The finite loop delay and the presence of a low-pass filter, required for stable loop operation, lead to a nontrivial frequency response. Here, the linearity improvement in OPLL is investigated, and simple relation among the loop delay, the open-loop gain, and the loop-filter bandwidth that must be satisfied for stable operation of the OPLL is found. This relation is used to determine the fundamental limit on spur-free dynamic range (SFDR) improvement that OPLL can offer over a conventional Mach-Zehnder (MZ)-type detector.

  19. A wide-band fiber optic frequency distribution system employing thermally controlled phase compensation

    NASA Technical Reports Server (NTRS)

    Johnson, Dean; Calhoun, Malcolm; Sydnor, Richard; Lutes, George

    1993-01-01

    An active wide-band fiber optic frequency distribution system employing a thermally controlled phase compensator to stabilize phase variations induced by environmental temperature changes is described. The distribution system utilizes bidirectional dual wavelength transmission to provide optical feedback of induced phase variations of 100 MHz signals propagating along the distribution cable. The phase compensation considered differs from earlier narrow-band phase compensation designs in that it uses a thermally controlled fiber delay coil rather than a VCO or phase modulation to compensate for induced phase variations. Two advantages of the wide-band system over earlier designs are (1) that it provides phase compensation for all transmitted frequencies, and (2) the compensation is applied after the optical interface rather than electronically ahead of it as in earlier schemes. Experimental results on the first prototype shows that the thermal stabilizer reduces phase variations and Allan deviation by a factor of forty over an equivalent uncompensated fiber optic distribution system.

  20. Effects of Surface Ligand Density on Lipid-Monolayer-mediated 2D Assembly of Proteins

    SciTech Connect

    Fukuto, M.; Wang, S; Lohr, M; Kewalramani, S; Yang, L

    2010-01-01

    The two-dimensional (2D) assembly of the protein streptavidin on a biotin-bearing lipid monolayer was studied as a function of the surface density of biotin, a protein-binding ligand, by means of in situ X-ray scattering and optical Brewster angle microscopy measurements at the liquid-vapor interface. Although this model system has been studied extensively, the relationship between the surface biotin density and the adsorption, 2D phase behavior, and binding state of streptavidin has yet to be determined quantitatively. The observed equilibrium phase behavior provides direct structural evidence that the 2D crystallization of the lipid-bound streptavidin occurs as a density-driven first-order phase transition. The minimum biotin density required for the 2D crystallization of streptavidin is found to be remarkably close to the density of the ligand-binding sites in the protein crystal. Moreover, both above and below this transition, the observed biotin-density dependence of protein adsorption is well described by the binding of biotin-bearing lipids at both of the two available sites per streptavidin molecule. These results imply that even in the low-density noncrystalline phase, the bound proteins share a common, fixed orientation relative to the surface normal, and that the 2D crystallization occurs when the lateral protein density reaches 50-70% of the 2D crystal density. This study demonstrates that in addition to a well-defined molecular orientation, high lateral packing density is essential to the 2D crystallization of proteins.

  1. Computational Screening of 2D Materials for Photocatalysis.

    PubMed

    Singh, Arunima K; Mathew, Kiran; Zhuang, Houlong L; Hennig, Richard G

    2015-03-19

    Two-dimensional (2D) materials exhibit a range of extraordinary electronic, optical, and mechanical properties different from their bulk counterparts with potential applications for 2D materials emerging in energy storage and conversion technologies. In this Perspective, we summarize the recent developments in the field of solar water splitting using 2D materials and review a computational screening approach to rapidly and efficiently discover more 2D materials that possess properties suitable for solar water splitting. Computational tools based on density-functional theory can predict the intrinsic properties of potential photocatalyst such as their electronic properties, optical absorbance, and solubility in aqueous solutions. Computational tools enable the exploration of possible routes to enhance the photocatalytic activity of 2D materials by use of mechanical strain, bias potential, doping, and pH. We discuss future research directions and needed method developments for the computational design and optimization of 2D materials for photocatalysis.

  2. Surface plasmon sensing of gas phase contaminants using optical fiber.

    SciTech Connect

    Thornberg, Steven Michael; White, Michael I.; Rumpf, Arthur Norman; Pfeifer, Kent Bryant

    2009-10-01

    Fiber-optic gas phase surface plasmon resonance (SPR) detection of several contaminant gases of interest to state-of-health monitoring in high-consequence sealed systems has been demonstrated. These contaminant gases include H{sub 2}, H{sub 2}S, and moisture using a single-ended optical fiber mode. Data demonstrate that results can be obtained and sensitivity is adequate in a dosimetric mode that allows periodic monitoring of system atmospheres. Modeling studies were performed to direct the design of the sensor probe for optimized dimensions and to allow simultaneous monitoring of several constituents with a single sensor fiber. Testing of the system demonstrates the ability to detect 70mTorr partial pressures of H{sub 2} using this technique and <280 {micro}Torr partial pressures of H{sub 2}S. In addition, a multiple sensor fiber has been demonstrated that allows a single fiber to measure H{sub 2}, H{sub 2}S, and H{sub 2}O without changing the fiber or the analytical system.

  3. A Fiber Optic Colorimeter For Liquid Phase Chromatography Of Aminoacids

    NASA Astrophysics Data System (ADS)

    Donati, S.; Tambosso, T.

    1989-01-01

    Liquid phase chromatography is a well known technique routinely used in analytical chemistry for assays and measurements of aminoacids 1,2. Basically, the solution is pumped at high pressure in a long capillary tube (the chromatographic column) to fraction out the constituents, is mixed to a suitable reactant (usually ninhydrine) so as to develop a spectral absorbance, and is finally analyzed in a flow cell by a colorimeter. With ninhydrine, the reaction product is DIDA (diketo-hydrindilidene-diketolhydrin diamine) which exhibits absorbance peaks at 440 nm (blue) and 570 nm (yellow) in a proportion dependent on the specific aminoacid (Fig. 1), while the amplitude of peaks is proportional to the aminoacid concentration in view of Lambert-Beer law. Besides the two measurement channels of absorbance, either of which or the sum of which is taken as the output signal, a third channel at the wavelength 690 nm at which DIDA is transparent (Ar = 0), is used internally as the reference to the first two. Thus, the colorimeter is actually a spectrophotometer with two fixed-wavelength channels, each referenced in wavelength. In this paper, we report on the design and engineering of a colorimeter aimed to medium/high performances, high reliability and low cost. Use of fiber optics as the beamsplitter of the optical channels is shown to give substantial advantages.

  4. Optical refractometry based on Fresnel diffraction from a phase wedge.

    PubMed

    Tavassoly, M Taghi; Saber, Ahad

    2010-11-01

    A method that utilizes the Fresnel diffraction of light from the phase step formed by a transparent wedge is introduced for measuring the refractive indices of transparent solids, liquids, and solutions. It is shown that, as a transparent wedge of small apex angle is illuminated perpendicular to its surface by a monochromatic parallel beam of light, the Fresnel fringes, caused by abrupt change in refractive index at the wedge lateral boundary, are formed on a screen held perpendicular to the beam propagation direction. The visibility of the fringes varies periodically between zero and 1 in the direction normal to the wedge apex. For a known or measured apex angle, the wedge refractive index is obtained by measuring the period length by a CCD. To measure the refractive index of a transparent liquid or solution, the wedge is installed in a transparent rectangle cell containing the sample. Then, the cell is illuminated perpendicularly and the visibility period is measured. By using modest optics, one can measure the refractive index at a relative uncertainty level of 10(-5). There is no limitation on the refractive index range. The method can be applied easily with no mechanical manipulation. The measuring apparatus can be very compact with low mechanical and optical noises.

  5. Phase-sensitive multiple reference optical coherence tomography (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Dsouza, Roshan I.; Subhash, Hrebesh; Neuhaus, Kai; Hogan, Josh; Wilson, Carol; Leahy, Martin

    2016-03-01

    Multiple reference OCT (MR-OCT) is a recently developed novel time-domain OCT platform based on a miniature reference arm optical delay, which utilizes a single miniature actuator and a partial mirror to generate recirculating optical delay for extended axial-scan range. MR-OCT technology promises to fit into a robust and cost-effective design, compatible with integration into consumer-level devices for addressing wide applications in mobile healthcare and biometry applications. Using conventional intensity based OCT processing techniques, the high-resolution structural imaging capability of MR-OCT has been recently demonstrated for various applications including in vivo human samples. In this study, we demonstrate the feasibility of implementing phase based processing with MR-OCT for various functional applications such as Doppler imaging and sensing of blood vessels, and for tissue vibrography applications. The MR-OCT system operates at 1310nm with a spatial resolution of ~26 µm and an axial scan rate of 600Hz. Initial studies show a displacement-sensitivity of ~20 nm to ~120 nm for the first 1 to 9 orders of reflections, respectively with a mirror as test-sample. The corresponding minimum resolvable velocity for these orders are ~2.3 µm/sec and ~15 µm/sec respectively. Data from a chick chorioallantoic membrane (CAM) model will be shown to demonstrate the feasibility of MR-OCT for imaging in-vivo blood flow.

  6. Nano-spatial parameters from 3D to 2D lattice dimensionality by organic variant in [ZnCl4]- [R]+ hybrid materials: Structure, architecture-lattice dimensionality, microscopy, optical Eg and PL correlations

    NASA Astrophysics Data System (ADS)

    Kumar, Ajit; Verma, Sanjay K.; Alvi, P. A.; Jasrotia, Dinesh

    2016-04-01

    The nanospatial morphological features of [ZnCl]- [C5H4NCH3]+ hybrid derivative depicts 28 nm granular size and 3D spreader shape packing pattern as analyzed by FESEM and single crystal XRD structural studies. The organic moiety connect the inorganic components through N-H+…Cl- hydrogen bond to form a hybrid composite, the replacement of organic derivatives from 2-methylpyridine to 2-Amino-5-choloropyridine results the increase in granular size from 28nm to 60nm and unit cell packing pattern from 3D-2D lattice dimensionality along ac plane. The change in optical energy direct band gap value from 3.01eV for [ZnCl]- [C5H4NCH3]+ (HM1) to 3.42eV for [ZnCl]- [C5H5ClN2]+ (HM2) indicates the role of organic moiety in optical properties of hybrid materials. The photoluminescence emission spectra is observed in the wavelength range of 370 to 600 nm with maximum peak intensity of 9.66a.u. at 438 nm for (HM1) and 370 to 600 nm with max peak intensity of 9.91 a.u. at 442 nm for (HM2), indicating that the emission spectra lies in visible range. PL excitation spectra depicts the maximum excitation intensity [9.8] at 245.5 nm for (HM1) and its value of 9.9 a.u. at 294 nm, specify the excitation spectra lies in UV range. Photoluminescence excitation spectra is observed in the wavelength range of 280 to 350 nm with maximum peak intensity of 9.4 a.u. at 285.5 nm and 9.9 a.u. at 294 and 297 nm, indicating excitation in the UV spectrum. Single crystal growth process and detailed physiochemical characterization such as XRD, FESEM image analysis photoluminescence property reveals the structure stability with non-covalent interactions, lattice dimensionality (3D-2D) correlations interweaving into the design of inorganic-organic hybrid materials.

  7. Directional edge enhancement in optical tomography of thin phase objects.

    PubMed

    Meneses-Fabian, Cruz; Montes-Perez, Areli; Rodriguez-Zurita, Gustavo

    2011-01-31

    In this paper, we make a proposal to obtain the Hilbert-transform for each entry of the projection data leaving the slice of a thin phase object. These modified projections are stacked in such a way that they form a modified sinogram called Hilbert-sinogram. We prove that the inverse Radon-transform of this sinogram is the directional Hilbert-transform of the slice function, and the reconstructed image is the directional edge enhancement of the distribution function on the slice. The Hilbert-transform is implemented by a 4f optical Fourier-transform correlator and a spatial filter consisting of a phase step of π radians. One important feature of this proposal is to perform a turn of 180° in the spatial filter at a certain value of the projection angle within the range [0°, 360°]. The desired direction of enhancement can be chosen by the proper selection of such turning angle. We present both the mathematical modeling and numerical results.

  8. Monolithic optical phased-array transceiver in a standard SOI CMOS process.

    PubMed

    Abediasl, Hooman; Hashemi, Hossein

    2015-03-09

    Monolithic microwave phased arrays are turning mainstream in automotive radars and high-speed wireless communications fulfilling Gordon Moores 1965 prophecy to this effect. Optical phased arrays enable imaging, lidar, display, sensing, and holography. Advancements in fabrication technology has led to monolithic nanophotonic phased arrays, albeit without independent phase and amplitude control ability, integration with electronic circuitry, or including receive and transmit functions. We report the first monolithic optical phased array transceiver with independent control of amplitude and phase for each element using electronic circuitry that is tightly integrated with the nanophotonic components on one substrate using a commercial foundry CMOS SOI process. The 8 × 8 phased array chip includes thermo-optical tunable phase shifters and attenuators, nano-photonic antennas, and dedicated control electronics realized using CMOS transistors. The complex chip includes over 300 distinct optical components and over 74,000 distinct electrical components achieving the highest level of integration for any electronic-photonic system.

  9. Spatial-light-modulator-based adaptive optical system for the use of multiple phase retrieval methods.

    PubMed

    Lingel, Christian; Haist, Tobias; Osten, Wolfgang

    2016-12-20

    We propose an adaptive optical setup using a spatial light modulator (SLM), which is suitable to perform different phase retrieval methods with varying optical features and without mechanical movement. By this approach, it is possible to test many different phase retrieval methods and their parameters (optical and algorithmic) using one stable setup and without hardware adaption. We show exemplary results for the well-known transport of intensity equation (TIE) method and a new iterative adaptive phase retrieval method, where the object phase is canceled by an inverse phase written into part of the SLM. The measurement results are compared to white light interferometric measurements.

  10. Phase Modulator with Terahertz Optical Bandwidth Formed by Multi-Layered Dielectric Stack

    NASA Technical Reports Server (NTRS)

    Keys, Andrew S. (Inventor); Fork, Richard L. (Inventor)

    2005-01-01

    An optical phase modulator includes a bandpass multilayer stack, formed by a plurality of dielectric layers, preferably of GaAs and AlAs, and having a transmission function related to the refractive index of the layers of the stack, for receiving an optical input signal to be phase modulated. A phase modulator device produces a nonmechanical change in the refractive index of each layer of the stack by, e.g., the injection of free carrier, to provide shifting of the transmission function so as to produce phase modulation of the optical input signal and to thereby produce a phase modulated output signal.

  11. Optical-wireless-optical full link for polarization multiplexing quadrature amplitude/phase modulation signal transmission.

    PubMed

    Li, Xinying; Yu, Jianjun; Chi, Nan; Zhang, Junwen

    2013-11-15

    We propose and experimentally demonstrate an optical wireless integration system at the Q-band, in which up to 40 Gb/s polarization multiplexing multilevel quadrature amplitude/phase modulation (PM-QAM) signal can be first transmitted over 20 km single-mode fiber-28 (SMF-28), then delivered over a 2 m 2 × 2 multiple-input multiple-output wireless link, and finally transmitted over another 20 km SMF-28. The PM-QAM modulated wireless millimeter-wave (mm-wave) signal at 40 GHz is generated based on the remote heterodyning technique, and demodulated by the radio-frequency transparent photonic technique based on homodyne coherent detection and baseband digital signal processing. The classic constant modulus algorithm equalization is used at the receiver to realize polarization demultiplexing of the PM-QAM signal. For the first time, to the best of our knowledge, we realize the conversion of the PM-QAM modulated wireless mm-wave signal to the optical signal as well as 20 km fiber transmission of the converted optical signal.

  12. Suppression of phase and supermode noise in a harmonic mode-locked erbium-doped fiber laser with a semiconductor-optical-amplifier-based high-pass filter.

    PubMed

    Lin, Gong-Ru; Wu, Ming-Chung; Chang, Yung-Cheng

    2005-07-15

    By operating an intracavity semiconductor-optical-amplifier- (SOA-) based high-pass filter at the nearly transparent current condition, the supermode noise (SMN), the relaxation oscillation, and the single-sideband (SSB) phase noise can be simultaneously suppressed in an actively mode-locked erbium-doped fiber laser (EDFL). The SOA at the nearly transparent condition enhances the SMN suppression ratio of the EDFL from 32 to 76 dB at the cost of the phase noise degrading from -114 to -104.2 dBc/Hz and broadening the pulse width from 36 to 61 ps. With an optical bandpass filter, the SSB phase noise and the SMN suppression ratio can be further improved to -110 dBc/Hz and 81 dB, respectively. The EDFL pulse can be further shortened to 3.1 ps with a time-bandwidth product of 0.63 after compression.

  13. Traditional Chinese medicine herbal mixture LQ arrests FUCCI-expressing HeLa cells in G₀/G₁ phase in 2D plastic, 2.5D Matrigel, and 3D Gelfoam culture visualized with FUCCI imaging.

    PubMed

    Zhang, Lei; Wu, Chengyu; Bouvet, Michael; Yano, Shuya; Hoffman, Robert M

    2015-03-10

    We used the fluorescence ubiquitination-based cell cycle indicator (FUCCI) to monitor cell cycle arrest after treatment of FUCCI-expressing HeLa cells (FUCCI-HeLa) with a traditional Chinese medicine (TCM) herbal mixture LQ, previously shown to have anti-tumor and anti-metastatic activity in mouse models. Paclitaxel was used as the positive control. In 2D monolayer culture, the untreated control had approximately 45% of the cells in S/G₂/M phase. In contrast, the LQ-treated cells (9 mg/ml) were mostly in the G₀/G₁ (>90%) after 72 hours. After treatment with paclitaxel (0.01 μm), for 72 hours, 95% of the cells were in S/G₂/M. In 2.5D Matrigel culture, the colonies in the untreated control group had 40% of the cells in S/G₂/M. LQ arrested the cells in G₀/G₁ after 72 hours. Paclitaxel arrested almost all the cells in S/G₂/M after 72 hours. In 3D Gelfoam culture, the untreated control culture had approximately 45% of cells in G₂/M. In contrast, the LQ-treated cells were mostly in G₀/G₁ phase (>80%) after 72 hours treatment. Paclitaxel resulted in 90% of the cells arrested in S/G₂/M after 72 hours. The present report suggests the non-toxic LQ has potential to maintain cancers in a quiescent state for long periods of time.

  14. Highly integrated optical phased arrays: photonic integrated circuits for optical beam shaping and beam steering

    NASA Astrophysics Data System (ADS)

    Heck, Martijn J. R.

    2016-06-01

    Technologies for efficient generation and fast scanning of narrow free-space laser beams find major applications in three-dimensional (3D) imaging and mapping, like Lidar for remote sensing and navigation, and secure free-space optical communications. The ultimate goal for such a system is to reduce its size, weight, and power consumption, so that it can be mounted on, e.g. drones and autonomous cars. Moreover, beam scanning should ideally be done at video frame rates, something that is beyond the capabilities of current opto-mechanical systems. Photonic integrated circuit (PIC) technology holds the promise of achieving low-cost, compact, robust and energy-efficient complex optical systems. PICs integrate, for example, lasers, modulators, detectors, and filters on a single piece of semiconductor, typically silicon or indium phosphide, much like electronic integrated circuits. This technology is maturing fast, driven by high-bandwidth communications applications, and mature fabrication facilities. State-of-the-art commercial PICs integrate hundreds of elements, and the integration of thousands of elements has been shown in the laboratory. Over the last few years, there has been a considerable research effort to integrate beam steering systems on a PIC, and various beam steering demonstrators based on optical phased arrays have been realized. Arrays of up to thousands of coherent emitters, including their phase and amplitude control, have been integrated, and various applications have been explored. In this review paper, I will present an overview of the state of the art of this technology and its opportunities, illustrated by recent breakthroughs.

  15. Highly integrated optical phased arrays: photonic integrated circuits for optical beam shaping and beam steering

    NASA Astrophysics Data System (ADS)

    Heck, Martijn J. R.

    2017-01-01

    Technologies for efficient generation and fast scanning of narrow free-space laser beams find major applications in three-dimensional (3D) imaging and mapping, like Lidar for remote sensing and navigation, and secure free-space optical communications. The ultimate goal for such a system is to reduce its size, weight, and power consumption, so that it can be mounted on, e.g. drones and autonomous cars. Moreover, beam scanning should ideally be done at video frame rates, something that is beyond the capabilities of current opto-mechanical systems. Photonic integrated circuit (PIC) technology holds the promise of achieving low-cost, compact, robust and energy-efficient complex optical systems. PICs integrate, for example, lasers, modulators, detectors, and filters on a single piece of semiconductor, typically silicon or indium phosphide, much like electronic integrated circuits. This technology is maturing fast, driven by high-bandwidth communications applications, and mature fabrication facilities. State-of-the-art commercial PICs integrate hundreds of elements, and the integration of thousands of elements has been shown in the laboratory. Over the last few years, there has been a considerable research effort to integrate beam steering systems on a PIC, and various beam steering demonstrators based on optical phased arrays have been realized. Arrays of up to thousands of coherent emitters, including their phase and amplitude control, have been integrated, and various applications have been explored. In this review paper, I will present an overview of the state of the art of this technology and its opportunities, illustrated by recent breakthroughs.

  16. Optical amplifier exhibiting net phase-mismatch selected to at least partially reduce gain-induced phase-matching during operation and method of operation

    SciTech Connect

    Feve, Jean-Philippe; Kliner, Dahv A. V.; Farrow; Roger L.

    2011-02-01

    An optical amplifier, such as an optical waveguide amplifier (e.g., an optical fiber amplifier or a planar waveguide) or a non-guiding optical amplifier, that exhibits a net phase-mismatch selected to at least partially reduce gain-induced phase-matching during operation thereof is disclosed. In one aspect of the invention, an optical amplifier structure includes at least one optical amplifier having a length and a gain region. The at least one optical amplifier exhibits a net phase-mismatch that varies along at least part of the length thereof selected to at least partially reduce gain-induced phase-matching during operation thereof.

  17. Mean-field analysis of quantum phase transitions in a periodic optical superlattice

    SciTech Connect

    Dhar, Arya; Singh, Manpreet; Pai, Ramesh V.; Das, B. P.

    2011-09-15

    We analyze the various phases exhibited by a system of ultracold bosons in a periodic optical superlattice using the mean-field decoupling approximation. We investigate for a wide range of commensurate and incommensurate densities. We find the gapless superfluid phase, the gapped Mott insulator phase, and gapped insulator phases with distinct density wave orders.

  18. An Efficient Correction Algorithm for Eliminating Image Misalignment Effects on Co-Phasing Measurement Accuracy for Segmented Active Optics Systems.

    PubMed

    Yue, Dan; Xu, Shuyan; Nie, Haitao; Wang, Zongyang

    2016-01-01

    The misalignment between recorded in-focus and out-of-focus images using the Phase Diversity (PD) algorithm leads to a dramatic decline in wavefront detection accuracy and image recovery quality for segmented active optics systems. This paper demonstrates the theoretical relationship between the image misalignment and tip-tilt terms in Zernike polynomials of the wavefront phase for the first time, and an efficient two-step alignment correction algorithm is proposed to eliminate these misalignment effects. This algorithm processes a spatial 2-D cross-correlation of the misaligned images, revising the offset to 1 or 2 pixels and narrowing the search range for alignment. Then, it eliminates the need for subpixel fine alignment to achieve adaptive correction by adding additional tip-tilt terms to the Optical Transfer Function (OTF) of the out-of-focus channel. The experimental results demonstrate the feasibility and validity of the proposed correction algorithm to improve the measurement accuracy during the co-phasing of segmented mirrors. With this alignment correction, the reconstructed wavefront is more accurate, and the recovered image is of higher quality.

  19. An Efficient Correction Algorithm for Eliminating Image Misalignment Effects on Co-Phasing Measurement Accuracy for Segmented Active Optics Systems

    PubMed Central

    Yue, Dan; Xu, Shuyan; Nie, Haitao; Wang, Zongyang

    2016-01-01

    The misalignment between recorded in-focus and out-of-focus images using the Phase Diversity (PD) algorithm leads to a dramatic decline in wavefront detection accuracy and image recovery quality for segmented active optics systems. This paper demonstrates the theoretical relationship between the image misalignment and tip-tilt terms in Zernike polynomials of the wavefront phase for the first time, and an efficient two-step alignment correction algorithm is proposed to eliminate these misalignment effects. This algorithm processes a spatial 2-D cross-correlation of the misaligned images, revising the offset to 1 or 2 pixels and narrowing the search range for alignment. Then, it eliminates the need for subpixel fine alignment to achieve adaptive correction by adding additional tip-tilt terms to the Optical Transfer Function (OTF) of the out-of-focus channel. The experimental results demonstrate the feasibility and validity of the proposed correction algorithm to improve the measurement accuracy during the co-phasing of segmented mirrors. With this alignment correction, the reconstructed wavefront is more accurate, and the recovered image is of higher quality. PMID:26934045

  20. A prototype high-speed optically-steered X-band phased array antenna.

    PubMed

    Wu, Pengfei; Tang, Suning; Raible, Daniel E

    2013-12-30

    We develop a prototype of optically-steered X-band phased array antenna with capabilities of multi-band and multi-beam operations. It exploits high-speed wavelength tunable lasers for optical true-time delays over a dispersive optical fiber link, enabling agile, broadband and vibration-free RF beam steering with large angle.

  1. Sequence dependence of phase-induced intensity noise in optical networks that employ direct modulation

    NASA Astrophysics Data System (ADS)

    Tur, M.; Legg, P. J.; Shabeer, M.; Andonovic, I.

    1995-02-01

    Phase-induced intensity noise in optical networks that employ directly modulated laser sources is observed to be bit-sequence dependent. This dependence is explained by optical frequency variations that are due to the heating history of the laser chip and is accurately modeled. This effect may permit suppression of phase-induced intensity noise in many types of fiber system with multipaths.

  2. Long-Distance Frequency Transfer Over an Urban Fiber Link Using Optical Phase Stabilization

    DTIC Science & Technology

    2008-12-01

    eliability, and the potential for phase noise cancellation. Microwave frequency transmission using amplitude odulation of an optical carrier has demonstrated...isolation box. About W of optical power, including 30% in the phase odulation sidebands, are typically sent onto the cavity ith a coupling

  3. Optical tweezers assisted quantitative phase imaging led to thickness mapping of red blood cells

    NASA Astrophysics Data System (ADS)

    Cardenas, Nelson; Mohanty, Samarendra K.

    2013-07-01

    Quantitative phase microscopy (QPM) allows dynamic mapping of optical path length of microscopic samples with high temporal and axial resolution. However, decoupling of the geometric thickness from the refractive index in phase measurements is challenging. Here, we report use of optical tweezers combined with QPM for decoupling geometric thickness from the refractive index. This is demonstrated by orienting the microscopic sample (red blood cell) by optical tweezers and imaging the phase at various orientations. Since optical tweezers can orient wide variety of micro and nanoscopic objects, this integrated method can be employed to accurately determine their physical properties.

  4. Subsurface Optical Microscopy of Coarse Grain Spinels. Phase 1

    DTIC Science & Technology

    2013-12-01

    A 456 nm LED line bar illuminated in figure 15 and a Xenon fiber optic bar illuminator is shown for figure 16. The optical in situ or subsurface ... imaging of coarse grain spinels and AlONs is optically more complex than expected. An overhead view of the side illumination field is shown in figure 20

  5. Phase Retrieval System for Assessing Diamond Turning and Optical Surface Defects

    NASA Technical Reports Server (NTRS)

    Dean, Bruce; Maldonado, Alex; Bolcar, Matthew

    2011-01-01

    An optical design is presented for a measurement system used to assess the impact of surface errors originating from diamond turning artifacts. Diamond turning artifacts are common by-products of optical surface shaping using the diamond turning process (a diamond-tipped cutting tool used in a lathe configuration). Assessing and evaluating the errors imparted by diamond turning (including other surface errors attributed to optical manufacturing techniques) can be problematic and generally requires the use of an optical interferometer. Commercial interferometers can be expensive when compared to the simple optical setup developed here, which is used in combination with an image-based sensing technique (phase retrieval). Phase retrieval is a general term used in optics to describe the estimation of optical imperfections or aberrations. This turnkey system uses only image-based data and has minimal hardware requirements. The system is straightforward to set up, easy to align, and can provide nanometer accuracy on the measurement of optical surface defects.

  6. Determination of the liquid crystals phase transition temperatures using optical rotation effect

    NASA Astrophysics Data System (ADS)

    Niu, Xiao-ling; Liu, Wei-guo; Liu, Peng; Cai, Chang-long

    2011-11-01

    Using optical rotation effect, a sensitive, simple optical analytical system is developed for determining the phase transition temperatures of liquid crystals (LCs). When a monochromatic polarized light passes through LCs sample and analyzer, the light intensity changes with temperature. Especially, during the phase transition process, the intensity varies greatly due to optical rotation effect. The variation of light intensity versus variation of temperature curve shows the phase transition temperatures of LCs clearly. The phase transition temperatures of three cholesteric liquid crystals (ChLCs) and a nematic liquid crystals (NLCs) were detected by this method, and compared with those of the differential scanning calorimetry (DSC) and polarized light microscope (PLM) methods.

  7. A 100 Mbps resonant cavity phase modulator for coherent optical communications

    NASA Technical Reports Server (NTRS)

    Chen, Chien-Chung; Robinson, Deborah L.; Hemmati, Hamid

    1992-01-01

    A resonant cavity electro-optic phase modulator has been designed and implemented to operate at a data rate of 100 Mbps. The modulator consists of an electro-optic crystal located in a highly resonant cavity. The cavity is electro-optically tuned on and off resonance, and the phase dispersion near the cavity resonance provides the output phase modulation. The performance of the modulator was measured by first heterodyne detecting the signal to an intermediate frequency and then measuring the spectral characteristics using an RF spectrum analyzer. The measured phase shift is shown to be in good agreement with the theoretical predictions.

  8. Correction of magnetooptic device phase errors in optical correlators through filter design modifications

    NASA Technical Reports Server (NTRS)

    Downie, John D.; Reid, Max B.; Hine, Butler P.

    1991-01-01

    We address the problem of optical phase errors in an optical correlator introduced by the input and filter plane spatial light modulators. Specifically, we study a laboratory correlator with magnetooptic spatial light modulator (MOSLM) devices. We measure and characterize the phase errors, analyze their effects on the correlation process, and discuss a means of correction through a design modification of the binary phase-only optical filter function. The phase correction technique is found to produce correlation results close to those of an error-free correlator.

  9. Phase-coherent orthogonally polarized optical single sideband modulation with arbitrarily tunable optical carrier-to-sideband ratio.

    PubMed

    Wang, Wen Ting; Liu, Jian Guo; Mei, Hai Kuo; Zhu, Ning Hua

    2016-01-11

    We propose and experimentally verify a novel approach to achieve phase-coherence orthogonally polarized optical single sideband (OSSB) modulation with a tunable optically carrier-to-sideband ratio (OCSR). In our scheme, the orthogonally polarized OSSB signal is achieved using a dual-polarization quadrature phase shift keying (DP-QPSK) modulator without an optical band-pass filter (OBPF). Therefore, the proposed method is wavelength independent. The DP-QPSK modulator includes two parallel QPSK modulators locating on its two arms. The upper QPSK modulator of the DP-QPSK modulator is driven by two quadrature sinusoidal microwave signals and works at the frequency shifting condition whose bias voltages are optimized to suppress the optical. The lower QPSK modulator of that works at the maximum transmission point and the optical carrier is not modulated. The OCSR is continuously tunable by simply adjusting the bias voltages of the lower modulator. The frequency shifting optical signal from the upper QPSK modulator and the optical carrier from the lower QPSK modulator are combined together at the output of the DP-QPSK modulator. The optical carrier and sideband are polarized orthogonally. The generated OSSB signals could be used to shift and code the phase of the microwave signal and generate ultra-wideband (UWB) microwave pulse. The proposed method is analyzed and experimental demonstrated.

  10. Influence of optical pumping wavelength on the ultrafast gain and phase recovery acceleration of quantum-dot semiconductor optical amplifiers

    NASA Astrophysics Data System (ADS)

    Kim, Jungho

    2013-10-01

    We numerically investigate the influence of the optical pumping wavelength on the ultrafast gain and phase recovery acceleration of quantum-dot (QD) semiconductor optical amplifiers (SOAs) by solving 1088 coupled rate equations. The temporal variations of the gain and phase recovery response at the ground state (GS) of QDs are calculated at various signal wavelengths when the optical pumping wavelengths at the excited state (ES) of QDs are varied. The phase recovery response is fastest when the wavelength of the signal and pumping beams corresponds to the respective emission wavelength of the GS and the ES in the same size of QDs. The absorption efficiency of the optical pumping beam at the ES is determined by the Lorentzian line shape function of the homogeneous broadening.

  11. Time-reversing a monochromatic subwavelength optical focus by optical phase conjugation of multiply-scattered light

    PubMed Central

    Park, Jongchan; Park, Chunghyun; Lee, KyeoReh; Cho, Yong-Hoon; Park, YongKeun

    2017-01-01

    Due to its time-reversal nature, optical phase conjugation generates a monochromatic light wave which retraces its propagation paths. Here, we demonstrate the regeneration of a subwavelength optical focus by phase conjugation. Monochromatic light from a subwavelength source is scattered by random nanoparticles, and the scattered light is phase conjugated at the far-field region by coupling its wavefront into a single-mode optical reflector using a spatial light modulator. Then the conjugated beam retraces its propagation paths and forms a refocus on the source at the subwavelength scale. This is the first direct experimental realisation of subwavelength focusing beyond the diffraction limit with far-field time reversal in the optical domain. PMID:28134267

  12. Controllable optical phase shift over one radian from a single isolated atom.

    PubMed

    Jechow, A; Norton, B G; Händel, S; Blūms, V; Streed, E W; Kielpinski, D

    2013-03-15

    Fundamental optics such as lenses and prisms work by applying phase shifts of several radians to incoming light, and rapid control of such phase shifts is crucial to telecommunications. However, large, controllable optical phase shifts have remained elusive for isolated quantum systems. We have used a single trapped atomic ion to induce and measure a large optical phase shift of 1.3±0.1 radians in light scattered by the atom. Spatial interferometry between the scattered light and unscattered illumination light enables us to isolate the phase shift in the scattered component. The phase shift achieves the maximum value allowed by atomic theory over the accessible range of laser frequencies, pointing out new opportunities in microscopy and nanophotonics. Single-atom phase shifts of this magnitude open up new quantum information protocols, in particular long-range quantum phase-shift-keying cryptography.

  13. Genetic Algorithm Phase Retrieval for the Systematic Image-Based Optical Alignment Testbed

    NASA Technical Reports Server (NTRS)

    Taylor, Jaime; Rakoczy, John; Steincamp, James

    2003-01-01

    Phase retrieval requires calculation of the real-valued phase of the pupil fimction from the image intensity distribution and characteristics of an optical system. Genetic 'algorithms were used to solve two one-dimensional phase retrieval problem. A GA successfully estimated the coefficients of a polynomial expansion of the phase when the number of coefficients was correctly specified. A GA also successfully estimated the multiple p h e s of a segmented optical system analogous to the seven-mirror Systematic Image-Based Optical Alignment (SIBOA) testbed located at NASA s Marshall Space Flight Center. The SIBOA testbed was developed to investigate phase retrieval techniques. Tiphilt and piston motions of the mirrors accomplish phase corrections. A constant phase over each mirror can be achieved by an independent tip/tilt correction: the phase Conection term can then be factored out of the Discrete Fourier Tranform (DFT), greatly reducing computations.

  14. Phase-locking and coherent power combining of broadband linearly chirped optical waves.

    PubMed

    Satyan, Naresh; Vasilyev, Arseny; Rakuljic, George; White, Jeffrey O; Yariv, Amnon

    2012-11-05

    We propose, analyze and demonstrate the optoelectronic phase-locking of optical waves whose frequencies are chirped continuously and rapidly with time. The optical waves are derived from a common optoelectronic swept-frequency laser based on a semiconductor laser in a negative feedback loop, with a precisely linear frequency chirp of 400 GHz in 2 ms. In contrast to monochromatic waves, a differential delay between two linearly chirped optical waves results in a mutual frequency difference, and an acoustooptic frequency shifter is therefore used to phase-lock the two waves. We demonstrate and characterize homodyne and heterodyne optical phase-locked loops with rapidly chirped waves, and show the ability to precisely control the phase of the chirped optical waveform using a digital electronic oscillator. A loop bandwidth of ~ 60 kHz, and a residual phase error variance of < 0.01 rad(2) between the chirped waves is obtained. Further, we demonstrate the simultaneous phase-locking of two optical paths to a common master waveform, and the ability to electronically control the resultant two-element optical phased array. The results of this work enable coherent power combining of high-power fiber amplifiers-where a rapidly chirping seed laser reduces stimulated Brillouin scattering-and electronic beam steering of chirped optical waves.

  15. A phase insensitive all-optical router based on nonlinear lenslike planar waveguides.

    PubMed

    Mateo, Eduardo; Liñares, Jesús

    2005-05-02

    We present the design of an all-optical router based on the properties of both propagation and interaction of Gaussian beams in lenslike planar guides. Variational results of single co- and counterpropagation are derived and used to design three integrated optical devices, that is, a header extraction device, an optical bistable device and a data routing device, which perform an ultrafast, phase-insensitive and fiber compatible routing operation in the optical domain.

  16. Photonic radio-frequency dissemination via optical fiber with high-phase stability.

    PubMed

    Wang, Xiaocheng; Liu, Zhangweiyi; Wang, Siwei; Sun, Dongning; Dong, Yi; Hu, Weisheng

    2015-06-01

    We demonstrate a photonic radio-frequency transmission system via optical fiber. Optical radio-frequency signal is generated utilizing a Mach-Zehnder modulator based on double-side-band with carrier suppression modulation scheme. The phase error induced by optical fiber transmission is transferred to an intermediate frequency signal by the dual-heterodyne phase error transfer scheme, and then canceled by a phase locked loop. With precise phase compensation, a radio frequency with high-phase stability can be obtained at the remote end. We performed 20.07-GHz radio-frequency transfer over 100-km optical fiber, and achieved residual phase noise of -65  dBc/Hz at 1-Hz offset frequency, and the RMS timing jitter in the frequency range from 0.01 Hz to 1 MHz reaches 110 fs. The long-term frequency stability also achieves 8×10(-17) at 10,000 s averaging time.

  17. Closed-loop fiber-optic gyroscope with a sawtooth phase-modulated feedback.

    PubMed

    Ebberg, A; Schiffner, G

    1985-06-01

    Theoretical and experimental investigations of a closed-loop fiber-optic gyroscope are reported. Phase nulling is accomplished by applying a sawtooth modulation to an integrated-optic phase modulator located at one side of the sensing loop. The frequency of the phase modulation is proportional to the rotation rate, thus permitting a digital readout. The influence of a finite flyback period on the scale factor is investigated.

  18. Design of a fiber-optic transmitter for microwave analog transmission with high phase stability

    NASA Technical Reports Server (NTRS)

    Logan, R. T., Jr.; Lutes, G. F.; Primas, L. E.; Maleki, L.

    1990-01-01

    The principal considerations in the design of fiber-optic transmitters for highly phase-stable radio frequency and microwave analog transmission are discussed. Criteria for a fiber-optic transmitter design with improved amplitude and phase-noise performance are developed through consideration of factors affecting the phase noise, including low-frequency laser-bias supply noise, the magnitude and proximity of external reflections into the laser, and temperature excursions of the laser-transmitter package.

  19. A phase-sensitive optical time-domain reflectometer with dual-pulse phase modulated probe signal

    NASA Astrophysics Data System (ADS)

    Alekseev, A. E.; Vdovenko, V. S.; Gorshkov, B. G.; Potapov, V. T.; Simikin, D. E.

    2014-11-01

    A novel configuration of a phase-sensitive optical time-domain reflectometer (OTDR) utilizing dual-pulse phase modulations of the probe signal is presented and experimentally demonstrated. The proposed modulation method enables one to perform the demodulation and reconstruction of an external perturbation signal which impacts the fiber using the phase diversity technique. The proposed phase-sensitive OTDR has some advantages in comparison with conventional solutions, which are discussed. The feasibility of a double pulse OTDR with phase modulation is demonstrated and theoretically proved.

  20. Phases of a two-dimensional bose gas in an optical lattice.

    PubMed

    Jiménez-García, K; Compton, R L; Lin, Y-J; Phillips, W D; Porto, J V; Spielman, I B

    2010-09-10

    Ultracold atoms in optical lattices realize simple condensed matter models. We create an ensemble of ≈60 harmonically trapped 2D Bose-Hubbard systems from a 87Rb Bose-Einstein condensate in an optical lattice and use a magnetic resonance imaging approach to select a few 2D systems for study, thereby eliminating ensemble averaging. Our identification of the transition from superfluid to Mott insulator, as a function of both atom density and lattice depth, is in excellent agreement with a universal state diagram [M. Rigol, Phys. Rev. A 79 053605 (2009)] suitable for our trapped system. In agreement with theory, our data suggest a failure of the local density approximation in the transition region.

  1. Frequency transfer via a two-way optical phase comparison on a multiplexed fiber network.

    PubMed

    Calosso, C E; Bertacco, E; Calonico, D; Clivati, C; Costanzo, G A; Frittelli, M; Levi, F; Mura, A; Godone, A

    2014-03-01

    We performed a two-way remote optical phase comparison on optical fiber. Two optical frequency signals were launched in opposite directions in an optical fiber and their phases were simultaneously measured at the other end. In this technique, the fiber noise is passively canceled, and we compared two optical frequencies at the ultimate 10(-21) stability level. The experiment was performed on a 47 km fiber that is part of the metropolitan network for Internet traffic. The technique relies on the synchronous measurement of the optical phases at the two ends of the link, which is here performed by digital electronics. This scheme offers some advantages with respect to active noise cancellation schemes, as the light travels only once in the fiber.

  2. Real-time phase measurement of optical vortices based on pixelated micropolarizer array.

    PubMed

    Zhang, Zhigang; Dong, Fengliang; Qian, Kemao; Zhang, Qingchuan; Chu, Weiguo; Zhang, Yuntian; Ma, Xuan; Wu, Xiaoping

    2015-08-10

    The special spiral phase structure of an optical vortex leads to an intriguing study in modern singular optics. This paper proposes a real-time phase measurement method of vortex beam based on pixelated micropolarizer array (PMA). Four phase-shifting fringe images can be obtained from a single interference image, thus the vortex beam phase can be obtained in real-time. The proposed method can achieve full-field phase measurement of the vortex beam with the advantages of lower computation and vibration resistance. In the experiments, the typical phases of vortex with different topological charges are loaded on a spatial light modulator (SLM) to generate diffraction vortex beam, and the phase distribution of vortex beam is obtained in real-time, which confirm the robustness of this method. This method is of great significance in promoting the study of optical vortices.

  3. Demonstration of an optical isolator by use of a nonreciprocal phase shift.

    PubMed

    Yokoi, H; Mizumoto, T; Takano, T; Shinjo, N

    1999-12-20

    The experimental study of an optical isolator by use of a nonreciprocal phase shift is demonstrated. The isolator has an optical interferometer composed of tapered couplers, nonreciprocal phase shifters, and a reciprocal phase shifter. The isolator, designed for a 1.55-microm wavelength, was fabricated to investigate the characteristics of each component. The branching and coupling characteristics of the tapered coupler were measured. The nonreciprocal and reciprocal phase shifts were also evaluated. By applying an external magnetic field to the interferometer, we confirmed the nonreciprocal phase shift in the interferometric isolator.

  4. Quantum limits on optical phase estimation accuracy from classical rate-distortion theory

    SciTech Connect

    Nair, Ranjith

    2014-12-04

    The classical information-theoretic lower bound on the distortion of a random variable upon transmission through a noisy channel is applied to quantum-optical phase estimation. An approach for obtaining Bayesian lower bounds on the phase estimation accuracy is described that employs estimates of the classical capacity of the relevant quantum-optical channels. The Heisenberg limit for lossless phase estimation is derived for arbitrary probe state and prior distributions of the phase, and shot-noise scaling of the phase accuracy is established in the presence of nonzero loss for a parallel entanglement-assisted strategy with a single probe mode.

  5. Generation of squeezed light with a monolithic optical parametric oscillator: simultaneous achievement of phase matching and cavity resonance by temperature control.

    PubMed

    Yonezawa, Hidehiro; Nagashima, Koyo; Furusawa, Akira

    2010-09-13

    We generate squeezed state of light at 860 nm with a monolithic optical parametric oscillator. The optical parametric oscillator consists of a periodically poled KTiOPO(4) crystal, both ends of which are spherically polished and mirror-coated. We achieve both phase matching and cavity resonance by controlling only the temperature of the crystal. We observe up to -8.0±0.2 dB of squeezing with the bandwidth of 142 MHz. Our technique makes it possible to drive many monolithic cavities simultaneously by a single laser. Hence our monolithic optical parametric oscillator is quite suitable to continuous-variable quantum information experiments where we need a large number of highly squeezed light beams.

  6. Optical phased array using single crystalline silicon high-contrast-gratings for beamsteering

    NASA Astrophysics Data System (ADS)

    Yoo, Byung-Wook; Chan, Trevor; Megens, Mischa; Sun, Tianbo; Yang, Weijian; Rao, Yi; Horsley, David A.; Chang-Hasnain, Connie J.; Wu, Ming C.

    2013-03-01

    We present a single crystalline silicon optical phased array using high-contrast-gratings (HCG) for fast two dimensional beamforming and beamsteering at 0.5 MHz. Since there are various applications for beamforming and beamsteering such as 3D imaging, optical communications, and light detection and ranging (LIDAR), it is great interest to develop ultrafast optical phased arrays. However, the beamsteering speed of optical phased arrays using liquid crystal and electro-wetting are typically limited to tens of milliseconds. Optical phased arrays using micro-electro-mechanical systems (MEMS) technologies can operate in the submegahertz range, but generally require metal coatings. The metal coating unfortunately cause bending of mirrors due to thermally induced stress. The novel MEMS-based optical phased array presented here consists of electrostatically driven 8 × 8 HCG pixels fabricated on a silicon-on-insulator (SOI) wafer. The HCG mirror is designed to have 99.9% reflectivity at 1550 nm wavelength without any reflective coating. The size of the HCG mirror is 20 × 20 μm2 and the mass is only 140 pg, much lighter than traditional MEMS mirrors. Our 8 × 8 optical phased array has a total field of view of +/-10° × 10° and a beam width of 2°. The maximum phase shift regarding the actuation gap defined by a 2 μm buried oxide layer of a SOI wafer is 1.7π at 20 V.

  7. Fabrication of optical multilayer for two-color phase plate in super-resolution microscope

    SciTech Connect

    Iketaki, Yoshinori; Kitagawa, Katsuichi; Hidaka, Kohjiro; Kato, Naoki; Hirabayashi, Akira; Bokor, Nandor

    2014-07-15

    In super-resolution microscopy based on fluorescence depletion, the two-color phase plate (TPP) is an indispensable optical element, which can independently control the phase shifts for two beams of different color, i.e., the pump and erase beams. By controlling a phase shift of the erase beam through the TPP, the erase beam can be modulated into a doughnut shape, while the pump beam maintains the initial Gaussian shape. To obtain a reliable optical multiplayer (ML) for the TPP, we designed a ML with only two optical layers by performing numerical optimization. The measured phase shifts generated by the fabricated ML using interferometry correspond to the design values. The beam profiles in the focal plane are also consistent with theoretical results. Although the fabricated ML consists of only two optical layers, the ML can provide a suitable phase modulation function for the TPP in a practical super-resolution microscope.

  8. Fabrication of optical multilayer for two-color phase plate in super-resolution microscope.

    PubMed

    Iketaki, Yoshinori; Kitagawa, Katsuichi; Hidaka, Kohjiro; Kato, Naoki; Hirabayashi, Akira; Bokor, Nandor

    2014-07-01

    In super-resolution microscopy based on fluorescence depletion, the two-color phase plate (TPP) is an indispensable optical element, which can independently control the phase shifts for two beams of different color, i.e., the pump and erase beams. By controlling a phase shift of the erase beam through the TPP, the erase beam can be modulated into a doughnut shape, while the pump beam maintains the initial Gaussian shape. To obtain a reliable optical multiplayer (ML) for the TPP, we designed a ML with only two optical layers by performing numerical optimization. The measured phase shifts generated by the fabricated ML using interferometry correspond to the design values. The beam profiles in the focal plane are also consistent with theoretical results. Although the fabricated ML consists of only two optical layers, the ML can provide a suitable phase modulation function for the TPP in a practical super-resolution microscope.

  9. Effect of additional optical pumping injection into the ground-state ensemble on the gain and the phase recovery acceleration of quantum-dot semiconductor optical amplifiers

    NASA Astrophysics Data System (ADS)

    Kim, Jungho

    2014-02-01

    The effect of additional optical pumping injection into the ground-state ensemble on the ultrafast gain and the phase recovery dynamics of electrically-driven quantum-dot semiconductor optical amplifiers is numerically investigated by solving 1088 coupled rate equations. The ultrafast gain and the phase recovery responses are calculated with respect to the additional optical pumping power. Increasing the additional optical pumping power can significantly accelerate the ultrafast phase recovery, which cannot be done by increasing the injection current density.

  10. Parallel lensless optical correlator based on two phase-only spatial light modulators.

    PubMed

    Zeng, Xu; Inoue, Takashi; Fukuchi, Norihiro; Bai, Jian

    2011-06-20

    In this paper, we proposed a parallel phase-only lensless optical correlator based on two pieces of Liquid Crystal on Silicon Spatial Light Modulators. Phase Fresnel Lens Array and specialized grating are implemented to realize multi-channel and multiplexed LOC. Experimental results of Chinese characters' recognitions are given as demonstration of proposed technique. High uniformity of processing channels has been verified by autocorrelation process of four same Chinese characters. The technique is programmable and adjustment of optical path could be realized without changing of optical setup. The implementations could be performed on the same configuration as single channel optical correlator without mechanical alternation.

  11. Design-oriented analytic model of phase and frequency modulated optical links

    NASA Astrophysics Data System (ADS)

    Monsurrò, Pietro; Saitto, Antonio; Tommasino, Pasquale; Trifiletti, Alessandro; Vannucci, Antonello; Cimmino, Rosario F.

    2016-07-01

    An analytic design-oriented model of phase and frequency modulated microwave optical links has been developed. The models are suitable for design of broadband high dynamic range optical links for antenna remoting and optical beamforming, where noise and linearity of the subsystems are a concern Digital filter design techniques have been applied to the design of optical filters working as frequency discriminator, that are the bottleneck in terms of linearity for these systems. The models of frequency modulated, phase modulated, and coherent I/Q link have been used to compare performance of the different architectures in terms of linearity and SFDR.

  12. Modified geometrical optics of a smoothly inhomogeneous isotropic medium: the anisotropy, Berry phase, and the optical Magnus effect.

    PubMed

    Bliokh, K Yu; Bliokh, Yu P

    2004-08-01

    We present a modification of the geometrical optics method, which allows one to properly separate the complex amplitude and the phase of the wave solution. Appling this modification to a smoothly inhomogeneous isotropic medium, we show that in the first geometrical optics approximation the medium is weakly anisotropic. The refractive index, being dependent on the direction of the wave vector, contains the correction, which is proportional to the Berry geometric phase. Two independent eigenmodes of right-hand and left-hand circular polarizations exist in the medium. Their group velocities and phase velocities differ. The difference in the group velocities results in the shift of the rays of different polarizations (the optical Magnus effect). The difference in the phase velocities causes an increase of the Berry phase along with the interference of two modes leading to the familiar Rytov law about the rotation of the polarization plane of a wave. The theory developed suggests that both the optical Magnus effect and the Berry phase are accompanying nonlocal topological effects. In this paper the Hamilton ray equations giving a unified description for both of these phenomena have been derived and also a novel splitting effect for a ray of noncircular polarization has been predicted. Specific examples are also discussed.

  13. Optical phase conjugation in azo-dye doped chiral liquid crystal

    NASA Astrophysics Data System (ADS)

    Karpinski, Pawel; Miniewicz, Andrzej

    2012-10-01

    We report on optical phase conjugation phenomenon observed in chiral nematic liquid crystal showing band gap type Bragg reflection. The phase conjugate to the signal beam is observable only in the small temperature interval when the Bragg condition is fulfilled and only for circularly polarized light. The optical phase conjugation signals were observed at low cw laser light intensities (<100 mW/cm2, λ = 532 nm). Estimated value of third order optical susceptibility χ(3) = 2.8 × 10-17 m2/V2 is attributed to enhancement due to photoisomerisation of azo-dye (disperse red 1) inducing molecular reorientation process of liquid crystal molecules.

  14. Large space telescope, phase A. Volume 3: Optical telescope assembly

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The development and characteristics of the optical telescope assembly for the Large Space Telescope are discussed. The systems considerations are based on mission-related parameters and optical equipment requirements. Information is included on: (1) structural design and analysis, (2) thermal design, (3) stabilization and control, (4) alignment, focus, and figure control, (5) electronic subsystem, and (6) scientific instrument design.

  15. Link optimization for DWDM transmission with an optical phase conjugation.

    PubMed

    Rosa, Paweł; Rizzelli, Giuseppe; Ania-Castañón, Juan Diego

    2016-07-25

    We characterize in-span signal power asymmetry in random distributed feedback ultralong Raman laser-amplified WDM transmission and numerically optimize fiber span length and operating band to achieve the lowest inter-span signal power asymmetry between transmitted and optically conjugated channels in systems relying upon mid-link optical conjugation to combat fiber nonlinear impairments.

  16. Extensions of 2D gravity

    SciTech Connect

    Sevrin, A.

    1993-06-01

    After reviewing some aspects of gravity in two dimensions, I show that non-trivial embeddings of sl(2) in a semi-simple (super) Lie algebra give rise to a very large class of extensions of 2D gravity. The induced action is constructed as a gauged WZW model and an exact expression for the effective action is given.

  17. Closed-loop phase stabilizing and phase stepping methods for fiber-optic projected-fringe digital interferometry.

    PubMed

    Chao, Zhang; Fa-Jie, Duan

    2011-11-01

    Closed-loop active homodyne control can be used to make an interferometer steady against phase fluctuating followed by, for example, temperature gradients. This technology is introduced to stabilize π/2 -rad phase steps in a full-field interferometer. Two beams emitted from a fiber-optic coupler are combined to form an interference fringe pattern on a diffusely reflecting object. Fresnel reflections from the distal fiber ends undergo a double pass in the fibers and interference at the fourth port of the coupler which formed a Michelson interferometer. We suggested two means of ac phase tracking (PTAC) and dc phase tracking (PTDC) to maintain the interference intensity at quadrature by feedback control. Stepping between quadrature positions forces a π/2 -rad phase step. A method based on the ratio of harmonic of the interference signal was proposed to estimate phase step accuracy. A root-mean-square phase stability of 1.5 mrad and phase step accuracy of 2.6 mrad were measured with PTAC and a root-mean-square phase stability of 2 mrad and phase step accuracy of 13.8 mrad were measured with PTDC for the fiber-optic projected-fringe digital interferometry following the same condition. It worked well in two hours without resetting the integrator.

  18. High-speed and reconfigurable all-optical signal processing for phase and amplitude modulated signals

    NASA Astrophysics Data System (ADS)

    Khaleghi, Salman

    Technology has empowered people in all walks of life to generate, store, and communicate enormous amounts of data. Recent technological advances in high-speed backbone data networks, together with the growing trend toward bandwidth-demanding applications such as data and video sharing, cloud computing, and data collection systems, have created a need for higher capacities in signal transmission and signal processing. Optical communication systems have long benefited from the large bandwidth of optical signals (beyond tera-hertz) to transmit information. Through the use of optical signal processing techniques, this Ph.D. dissertation explores the potential of very-high-speed optics to assist electronics in processing huge amounts of data at high speeds. Optical signal processing brings together various fields of optics and signal processing---nonlinear devices and processes, analog and digital signals, and advanced data modulation formats---to achieve high-speed signal processing functions that can potentially operate at the line rate of fiber optic communications. Information can be encoded in amplitude, phase, wavelength, polarization, and spatial features of an optical wave to achieve high-capacity transmission. Many advances in the key enabling technologies have led to recent research in optical signal processing for digital signals that are encoded in one or more of these dimensions. Optical Kerr nonlinearities have femto-second response times that have been exploited for fast processing of optical signals. Various optical nonlinearities and chromatic dispersions have enabled key sub-system applications such as wavelength conversion, multicasting, multiplexing, demultiplexing, and tunable optical delays. In this Ph.D. dissertation, we employ these recent advances in the enabling technologies for high-speed optical signal processing to demonstrate various techniques that can process phase- and amplitude-encoded optical signals at the line rate of optics. We use

  19. All-optical demultiplexing of 16-QAM signals into QPSK tributaries using four-level optical phase quantizers.

    PubMed

    Bogris, Adonis

    2014-04-01

    The potential of four-level optical phase quantizers toward coherent processing of advanced modulation formats, such as 16-QAM, is proposed and numerically demonstrated. The work shows that phase quantization achieved in fiber-based phase-sensitive amplifiers can demultiplex 16-QAM into two quadrature phase shift keying (QPSK) signals, enabling subchannel switching. The numerical study highlights the impact of the quantizer transfer function on the performance of the demultiplexing process and numerically calculates the bit error rate for each QPSK tributary after the demultiplexing procedure.

  20. Optically controlled phased array antenna concepts using GaAs monolithic microwave integrated circuits

    NASA Technical Reports Server (NTRS)

    Kunath, R. R.; Bhasin, K. B.

    1986-01-01

    The desire for rapid beam reconfigurability and steering has led to the exploration of new techniques. Optical techniques have been suggested as potential candidates for implementing these needs. Candidates generally fall into one of two areas: those using fiber optic Beam Forming Networks (BFNs) and those using optically processed BFNs. Both techniques utilize GaAs Monolithic Microwave Integrated Circuits (MMICs) in the BFN, but the role of the MMIC for providing phase and amplitude variations is largely eliminated by some new optical processing techniques. This paper discusses these two types of optical BFN designs and provides conceptual designs of both systems.