Science.gov

Sample records for 2-ethyl mixed diesters

  1. 40 CFR 721.10505 - Phosphoric acid, mixed mono- and diesters with 2-ethyl-1-hexanol and polyethylene glycol mono-C12...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... diesters with 2-ethyl-1-hexanol and polyethylene glycol mono-C12-16-alkyl ethers. 721.10505 Section 721... Phosphoric acid, mixed mono- and diesters with 2-ethyl-1-hexanol and polyethylene glycol mono-C12-16-alkyl... identified as phosphoric acid, mixed mono- and diesters with 2-ethyl-1-hexanol and polyethylene glycol...

  2. 40 CFR 721.10505 - Phosphoric acid, mixed mono- and diesters with 2-ethyl-1-hexanol and polyethylene glycol mono-C12...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... diesters with 2-ethyl-1-hexanol and polyethylene glycol mono-C12-16-alkyl ethers. 721.10505 Section 721... Phosphoric acid, mixed mono- and diesters with 2-ethyl-1-hexanol and polyethylene glycol mono-C12-16-alkyl... identified as phosphoric acid, mixed mono- and diesters with 2-ethyl-1-hexanol and polyethylene glycol...

  3. 40 CFR 721.10457 - 1,2-Benzenedicarboxylic acid, mixed esters with benzyl alc., cyclohexanol, 2-ethyl-1-hexanol...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... esters with benzyl alc., cyclohexanol, 2-ethyl-1-hexanol, fumaric acid and propylene glycol. 721.10457...-hexanol, fumaric acid and propylene glycol. (a) Chemical substance and significant new uses subject to... alc., cyclohexanol, 2-ethyl-1-hexanol, fumaric acid and propylene glycol (PMN P-03-154; CAS No....

  4. 40 CFR 721.10457 - 1,2-Benzenedicarboxylic acid, mixed esters with benzyl alc., cyclohexanol, 2-ethyl-1-hexanol...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... esters with benzyl alc., cyclohexanol, 2-ethyl-1-hexanol, fumaric acid and propylene glycol. 721.10457...-hexanol, fumaric acid and propylene glycol. (a) Chemical substance and significant new uses subject to... alc., cyclohexanol, 2-ethyl-1-hexanol, fumaric acid and propylene glycol (PMN P-03-154; CAS No....

  5. Reactivity of 2-ethyl-1-hexanol in the atmosphere.

    PubMed

    Gallego-Iniesta García, María Paz; Moreno Sanroma, Alberto; Martín Porrero, María Pilar; Tapia Valle, Araceli; Cabañas Galán, Beatriz; Salgado Muñoz, María Sagrario

    2010-04-07

    Rate coefficients at room temperature for the reaction of 2-ethyl-1-hexanol with OH and NO(3) radicals and with Cl atoms have been determined in a 150 L PTFE chamber using GC-FID/SPME and FTIR as detection systems. The rate coefficients k (in units of cm(3) molecule(-1) s(-1)) obtained were: (1.13 +/- 0.31) 10(-11) for the OH reaction, (2.93 +/- 0.92) 10(-15) for the NO(3) reaction and (1.88 +/- 0.25) 10(-10) for the Cl reaction. Despite the high concentrations of 2-ethyl-1-hexanol, especially in indoor air, this is the first kinetic study carried out to date for these reactions. The results are consistent with the expected reactivity given the chemical structure of 2-ethyl-1-hexanol. Calculated atmospheric lifetimes reveal that the dominant loss process for 2-ethyl-1-hexanol is clearly the daytime reaction with the hydroxyl radical.

  6. Fragrance material review on 2-ethyl-1-butanol.

    PubMed

    McGinty, D; Letizia, C S; Api, A M

    2010-07-01

    A toxicologic and dermatologic review of 2-ethyl-1-butanol when used as a fragrance ingredient is presented. 2-Ethyl-1-butanol is a member of the fragrance structural group branched chain saturated alcohols. The common characteristic structural elements of the alcohols with saturated branched chain are one hydroxyl group per molecule, and a C(4)-C(12) carbon chain with one or several methyl side chains. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. A safety assessment of the entire branched chain saturated alcohol group will be published simultaneously with this document; please refer to Belsito et al. (2010) for an overall assessment of the safe use of this material and all other branched chain saturated alcohols in fragrances.

  7. Fragrance material review on 2-ethyl-1-hexanol.

    PubMed

    McGinty, D; Scognamiglio, J; Letizia, C S; Api, A M

    2010-07-01

    A summary of the safety data available for 2-ethyl-1-hexanol when used as a fragrance ingredient is presented. 2-Ethyl-1-hexanol is a member of the fragrance structural group branched chain saturated alcohols in which the common characteristic structural element is one hydroxyl group per molecule, and a C(4) to C(12) carbon chain with one or several methyl side chains. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. A safety assessment of the entire branched chain saturated alcohol group will be published simultaneously with this document; please refer to Belsito et al. (2010) for an overall assessment of the safe use of this material and all other branched chain saturated alcohols in fragrances.

  8. Design, synthesis, and calcium channel antagonist activity of new 1,4-dihydropyridines containing 4-(5)-chloro-2-ethyl-5-(4)-imidazolyl substituent.

    PubMed

    Davood, Asghar; Mansouri, Niloufar; Rerza Dehpour, Ahmad; Shafaroudi, Hamed; Alipour, Eskandar; Shafiee, Abbas

    2006-06-01

    A series of dialkyl, dicycloalkyl, and diaryl ester analogues of nifedipine, in which the ortho-nitro phenyl group at position 4 is replaced by the 4-(5)-chloro-2-ethyl-5-(4)-imidazolyl substituent, were synthesized and evaluated as calcium channel antagonists using the high K+ contraction of guinea pig ileal longitudinal smooth muscle. The results for the symmetrical ester series showed that increasing the length of the chain in C3- and C5-ester substituents increased the activity and the most active compound was the diphenylethyl ester derivative, so it was more active than the reference drug nifedipine. In unsymmetrical diester series, when R1 is methyl or ethyl, increasing lipophilic properties in the R substituent, increased the activity. The most active compounds were methyl/phenethyl and ethyl/phenethyl ester derivatives, being slightly more active than nifedipine.

  9. 40 CFR 721.4250 - Hexanoic acid, 2-ethyl-, ethenyl ester.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Hexanoic acid, 2-ethyl-, ethenyl ester... Substances § 721.4250 Hexanoic acid, 2-ethyl-, ethenyl ester. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as hexanoic acid, 2-ethyl-, ethenyl ester...

  10. 40 CFR 721.4250 - Hexanoic acid, 2-ethyl-, ethenyl ester.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Hexanoic acid, 2-ethyl-, ethenyl ester... Substances § 721.4250 Hexanoic acid, 2-ethyl-, ethenyl ester. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as hexanoic acid, 2-ethyl-, ethenyl ester...

  11. 40 CFR 721.4250 - Hexanoic acid, 2-ethyl-, ethenyl ester.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Hexanoic acid, 2-ethyl-, ethenyl ester... Substances § 721.4250 Hexanoic acid, 2-ethyl-, ethenyl ester. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as hexanoic acid, 2-ethyl-, ethenyl ester...

  12. 40 CFR 721.4250 - Hexanoic acid, 2-ethyl-, ethenyl ester.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Hexanoic acid, 2-ethyl-, ethenyl ester... Substances § 721.4250 Hexanoic acid, 2-ethyl-, ethenyl ester. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as hexanoic acid, 2-ethyl-, ethenyl ester...

  13. 40 CFR 721.4250 - Hexanoic acid, 2-ethyl-, ethenyl ester.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Hexanoic acid, 2-ethyl-, ethenyl ester... Substances § 721.4250 Hexanoic acid, 2-ethyl-, ethenyl ester. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as hexanoic acid, 2-ethyl-, ethenyl ester...

  14. VIEW, LOOKING NORTHWEST, OF DIESTER MODEL 6 CONCENTRATING (SHAKING) TABLE, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW, LOOKING NORTHWEST, OF DIESTER MODEL 6 CONCENTRATING (SHAKING) TABLE, USED FOR PRIMARY, MECHANICAL SEPARATION OF GOLD FROM ORE. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

  15. Esters of pyromellitic acid. Part I. Esters of achiral alcohols: regioselective synthesis of partial and mixed pyromellitate esters, mechanism of transesterification in the quantitative esterification of the pyromellitate system using orthoformate esters, and a facile synthesis of the ortho pyromellitate diester substitution pattern.

    PubMed

    Paine, John B

    2008-07-04

    Mild conditions and reversible anhydride formation allow a relative differentiation to be made of the four equivalent carbonyl groups of pyromellitic dianhydride (PMDA, benzene-1,2,4,5-tetracarboxylic dianhydride) in esterification, leading to regioselective methods to generate a wide range of partially or totally esterified products or products bearing differing esterifying groups at the different positions. Pyromellitate monoester anhydrides form efficiently in dichloromethane/triethylamine from 1 equiv of the alcohol. Under the same conditions, two different alcohols can be made to react sequentially. With 2 equiv of an alcohol, the usual mixture of meta and para diesters is obtained, separated by crystallization from HOAc. Meta and para dibenzyl pyromellitates served as regiospecific sources of other diesters, by further esterification followed by hydrogenolysis. Refluxing orthoformate triesters were found to effect quantitative esterification of the pyromellitate system under autocatalytic conditions; minor ester exchange with pre-existing esters (0-5% of total product) was ascribed to reversible anhydride formation. For general esterification with alcohols, partial ester acid chlorides were obtained using oxalyl chloride. Pyromellitate triesters afforded the ortho diester anhydrides upon distillation, thereby providing facile entry into the mostly novel ortho substitution pattern in this system. The requisite triesters were prepared by selective saponification or by the prior incorporation of one benzyl ester substituent, which could be removed by catalytic hydrogenolysis. The various benzyl esters of pyromellitates hydrogenolyzed smoothly to release the carboxylic acid groups without disturbance of pyromellitate aromaticity.

  16. Two new pregnane glycoside diesters from Caralluma russeliana.

    PubMed

    Abdel-Mogib, Mamdouh; Raghib, Hanaa M

    2013-01-01

    Two new pregnane glycoside diesters, 1 and 2, in addition to two triterpenoids, 3 and 4, and two sterols, 5 and 6 were isolated and identified from Caralluma russeliana (family Asclepiadaceae). The new pregnane glycosides, 14β-benzoyloxy-15β-isovaleroyloxy-16α-hydroxypregn-20-on-3-O-[β-D-3-O-methyl-6-deoxyoleandrosopyranosyl-(1 → 4)-β-D-cymaropyranosyl-(1 → 4)-β-D-cymaropyranoside] (1) and 14β-isovaleroyloxy-15β-benzoyloxy-16α-hydroxypregn-20-on-3-O-[β-D-3-O-methyl-6-deoxyoleandrosopyranosyl-(1 → 4)-β-D-cymaropyranosyl-(1 → 4)-β-D-cymaropyranoside] (2), are different from those isolated previously from the same species in the sugar moiety, in being diester, in being 20-one and in being 5,6 saturated by hydrogen. The isolated compounds were identified on the basis of spectral data.

  17. Effect of succinic acid and tween-80 on glucuronidation of 2-ethyl-6-methyl-3-hydroxypyridine.

    PubMed

    Baranov, P A; Kravtsova, O U; Sariev, A K; Sherdev, V P

    2008-07-01

    We studied the effect of succinic acid on the process of glucuronidation of 2-ethyl-6-methyl-3-hydroxypyridine after peroral and intraperitoneal administration in the form of succinate or a base. Since the basic form of 2-ethyl-6-methyl-3-hydroxypyridine is insoluble in water, it was administered in 5% Tween-80. It was necessary to evaluate also the effect of Tween-80 on glucuronidation of 2-ethyl-6-methyl-3-hydroxypyridine in different administration routes. Quantitative assay of glucuronidated fractions was performed by the method of reversed-phase HPLC with fluorometrical detection. The detection limit for this method was 10 ng/ml. We confirmed that the major excretion pathway for 2-ethyl-6-methyl-3-hydroxypyridine is conjugation with glucuronic acid. It was found that succinic acid increased excretion of glucuronidated metabolite after both peroral and intraperitoneal administration of 2-ethyl-6-methyl-3-hydroxypyridine in the form of succinate and base in 5% Tween-80. The effect of Tween-80 was detected only after peroral administration, which was probably related to its effect on absorption of this compound. Tween-80 increased excretion of glucuronate after peroral administration of 2-ethyl-6-methyl-3-hydroxypyridine in the form of succinate and in 5% Tween solution.

  18. 21 CFR 172.856 - Propylene glycol mono- and diesters of fats and fatty acids.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... fatty acids. 172.856 Section 172.856 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... diesters of fats and fatty acids. Propylene glycol mono- and diesters of fats and fatty acids may be safely... and/or fatty acids in compliance with § 172.860 and/or oleic acid derived from tall oil fatty acids...

  19. 21 CFR 172.856 - Propylene glycol mono- and diesters of fats and fatty acids.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... and/or fatty acids in compliance with § 172.860 and/or oleic acid derived from tall oil fatty acids in... fatty acids. 172.856 Section 172.856 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... diesters of fats and fatty acids. Propylene glycol mono- and diesters of fats and fatty acids may be...

  20. 21 CFR 172.856 - Propylene glycol mono- and diesters of fats and fatty acids.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... and/or fatty acids in compliance with § 172.860 and/or oleic acid derived from tall oil fatty acids in... fatty acids. 172.856 Section 172.856 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... diesters of fats and fatty acids. Propylene glycol mono- and diesters of fats and fatty acids may be...

  1. 21 CFR 172.856 - Propylene glycol mono- and diesters of fats and fatty acids.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... and/or fatty acids in compliance with § 172.860 and/or oleic acid derived from tall oil fatty acids in... fatty acids. 172.856 Section 172.856 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... diesters of fats and fatty acids. Propylene glycol mono- and diesters of fats and fatty acids may be...

  2. Efficient hydrogenation of biomass-derived cyclic di-esters to 1,2-diols.

    PubMed

    Balaraman, Ekambaram; Fogler, Eran; Milstein, David

    2012-01-28

    The unprecedented homogeneous hydrogenation of cyclic di-esters, in particular biomass-derived glycolide and lactide, to the corresponding 1,2-diols is catalyzed by Ru(II) PNN (1) and Ru(II) CNN (2) pincer complexes under mild hydrogen pressure and (in the case of 1) neutral conditions. No racemization was observed when a chiral di-ester was used.

  3. Mastering analytical challenges for the characterization of pentacyclic triterpene mono- and diesters of Calendula officinalis flowers by non-aqueous C30 HPLC and hyphenation with APCI-QTOF-MS.

    PubMed

    Nicolaus, Christoph; Sievers-Engler, Adrian; Murillo, Renato; D'Ambrosio, Michele; Lämmerhofer, Michael; Merfort, Irmgard

    2016-01-25

    Pentacyclic triterpene mono- and diesters have been isolated from Calendula officinalis flowers. GC-MS, APCI-Exactive Orbitrap HR-MS and NMR allowed to identify the triterpene skeleton in various samples (different triterpene mixtures from Calendula n-hexane extract). NMR provided evidence that triterpene diesters are present in the samples as well. However, the corresponding quasi-molecular ions could not be detected by APCI-Exactive Orbitrap HR-MS. Instability of triterpene diesters and loss of a fatty acid residue, respectively, in the ion-source made their MS detection challenging. Thus, a set of new APCI-QTOF-MS methods (using the TripleTOF 5600+ mass spectrometer) were developed which made it eventually possible to solve this problem and confirm the diester structures by MS via quasi-molecular ion [M+H](+) detection. Direct infusion APCI-QTOF MS experiments in MS/MS high sensitivity scan mode with low collision energy and multi-channel averaging acquisition (MCA) allowed the detection of quasi-molecular ions of triterpene diesters for the first time and unequivocally confirmed the presence of faradiol 3,16-dimyristate and -dipalmitate, as well as the corresponding mixed diesters faradiol 3-myristate,16-palmitate and faradiol 3-palmitate,16-myristate. Preferential loss of the fatty acid in 16-position made it possible to distinguish the mixed diesters by MS/MS spectra. Their chromatographic separations turned out to be challenging due to their bulkiness and extended molecular dimensions. However, separation could be achieved by an uncommon non-aqueous RPLC mode with an in-house synthesized C30 phase. Finally, two (U)HPLC-APCI-QTOF-MS methods with C18- and C30-based non-aqueous RPLC provided suitable, sensitive assays to monitor the presence of monoesters and diesters of various triterpenes (faradiol, maniladiol, arnidiol, arnitriol A and lupane-3β,16β,20-triol esters) in the n-hexane extract of C. officinalis with high mass resolution and good mass accuracy.

  4. Thermoresponsive cyclic peptide--poly(2-ethyl-2-oxazoline) conjugate nanotubes.

    PubMed

    Chapman, Robert; Bouten, Petra J M; Hoogenboom, Richard; Jolliffe, Katrina A; Perrier, Sébastien

    2013-07-25

    We describe the synthesis of self-assembling cyclic octapeptides of alternating D- and L-chirality conjugated to two poly(2-ethyl-2-oxazoline) chains. The resulting conjugates form nanotubes in water, which are reversibly transformed into microparticles as the temperature reaches the cloud point temperature of the conjugate.

  5. Hydrolysis of phosphate diesters with copper(II) catalysts

    SciTech Connect

    Morrow, J.R.; Trogler, W.C.

    1988-09-21

    Hydrolysis of phosphate diesters (4-NO/sub 2/C/sub 6/H/sub 4/O)/sub 2/PO/sub 2/Na (1) and (4-NO/sub 2/C/sub 6/H/sub 4/O)(CH/sub 3/CH/sub 2/O)PO/sub 2/Li (2) is catalyzed by Cu(bpy)/sup 2 +/ (bpy = 2,2'-bipyridine) in aqueous solution at 75/degrees/C in the pH range 5.8-8.3. Greater than 1000 turnovers and 200 turnovers per Cu(bpy)/sup 2 +/ are observed in the hydrolysis of 1 and 2, respectively. Catalytic rate enhancements of the hydrolysis of 1 and 2 by 1 x 10/sup -3/ M Cu(bpy)/sup 2 +/ at pH 6.5 over spontaneous hydrolysis under the same conditions without catalyst are 2000 and 150, respectively. The hydrolysis of copper-bound 2 proceeds 6300-fold more rapidly (pH 7.85) than hydrolysis of 2 in the absence of catalyst. Kinetics for the Cu(bpy)/sup 2 +/-catalyzed hydrolysis of 2 are examined in detail. Reaction pathways are proposed. Labeling studies in /sup 18/OH/sub 2/ show no incorporation of /sup 18/O into p-nitrophenol. A single /sup 18/O label incorporates into the (C/sub 2/H/sub 5/O)PO/sub 3//sup 2 -/ product. Several simple transition-metal complexes promote the catalytic hydrolysis of phosphate diesters 1 and 2, although none are as effective as Cu(bpy)/sup 2 +/. Second-order rate constants for Cu(bpy)/sup 2 +/-promoted hydrolysis in the series of 4-nitrophenyl phosphate esters (triester, diester (anion), monoester (dianion)) vary by only a factor of 60 in contrast to those for the reaction of these phosphate esters with anionic nucleophiles in the absence of metal catalysts, which show large differences in second-order rate constants (> 10/sup 3/) between each ester in the series. 54 references, 5 figures, 6 tables.

  6. Volumetric Properties of the Mixture 2-Chloroethanol C2H5ClO + C4H8O2 Ethyl ethanoate (VMSD1511, LB4798_V)

    NASA Astrophysics Data System (ADS)

    Cibulka, I.; Fontaine, J.-C.; Sosnkowska-Kehiaian, K.; Kehiaian, H. V.

    This document is part of Subvolume C 'Binary Liquid Systems of Nonelectrolytes III' of Volume 26 'Heats of Mixing, Vapor-Liquid Equilibrium, and Volumetric Properties of Mixtures and Solutions' of Landolt-Börnstein Group IV 'Physical Chemistry'. It contains the Chapter 'Volumetric Properties of the Mixture 2-Chloroethanol C2H5ClO + C4H8O2 Ethyl ethanoate (VMSD1511, LB4798_V)' providing data from direct measurement of low-pressure thermodynamic speed of sound at variable mole fraction and constant temperature, in the single-phase region(s).

  7. Volumetric Properties of the Mixture Propenenitrile C3H3N + C4H8O2 Ethyl ethanoate (VMSD1412, LB4274_V)

    NASA Astrophysics Data System (ADS)

    Cibulka, I.; Fontaine, J.-C.; Sosnkowska-Kehiaian, K.; Kehiaian, H. V.

    This document is part of Subvolume C 'Binary Liquid Systems of Nonelectrolytes III' of Volume 26 'Heats of Mixing, Vapor-Liquid Equilibrium, and Volumetric Properties of Mixtures and Solutions' of Landolt-Börnstein Group IV 'Physical Chemistry'. It contains the Chapter 'Volumetric Properties of the Mixture Propenenitrile C3H3N + C4H8O2 Ethyl ethanoate (VMSD1412, LB4274_V)' providing data by calculation of isentropic compressibility from low-pressure density and thermodynamic speed of sound data at variable mole fraction and constant temperature, in the single-phase region(s).

  8. Volumetric Properties of the Mixture Propenenitrile C3H3N + C4H8O2 Ethyl ethanoate (VMSD1511, LB4268_V)

    NASA Astrophysics Data System (ADS)

    Cibulka, I.; Fontaine, J.-C.; Sosnkowska-Kehiaian, K.; Kehiaian, H. V.

    This document is part of Subvolume C 'Binary Liquid Systems of Nonelectrolytes III' of Volume 26 'Heats of Mixing, Vapor-Liquid Equilibrium, and Volumetric Properties of Mixtures and Solutions' of Landolt-Börnstein Group IV 'Physical Chemistry'. It contains the Chapter 'Volumetric Properties of the Mixture Propenenitrile C3H3N + C4H8O2 Ethyl ethanoate (VMSD1511, LB4268_V)' providing data from direct measurement of low-pressure thermodynamic speed of sound at variable mole fraction and constant temperature, in the single-phase region(s).

  9. 2-Ethyl-6-methyl­anilinium 4-methyl­benzene­sulfonate

    PubMed Central

    Wu, Tian-Quan; Xia, Lin; Hu, Ai-Xi; Ye, Jiao

    2009-01-01

    The title compound, C9H14N+·C7H7SO3 −, contains a 2-ethyl-6-methyl­anilinium cation and a 4-methyl­benzene­sulfonic anion. The cations are anchored between the anions through N—H⋯O hydrogen bonds. Electrostatic and van der Waals inter­actions, as well as hydrogen bonds, maintain the structural cohesion. PMID:21581966

  10. Efficient promotion of phosphate diester cleavage by a face-to-face cyclodextrin dimer without metal.

    PubMed

    Hu, Ping; Liu, Gao-Feng; Ji, Liang-Nian; Mao, Zong-Wan

    2012-06-04

    An organic face-to-face cyclodextrin dimer promotes the cleavage of bis(4-nitrophenyl) phosphate efficiently in neutral pH without the addition of metal. Both of the phosphate diester bonds can be cleaved.

  11. Novel aliphatic lipid-based diesters for use in lubricant formulations: Structure property investigations

    NASA Astrophysics Data System (ADS)

    Raghunanan, Latchmi Cindy

    Structure-property relationships are increasingly valued for the identification of specifically engineered materials with properties optimized for targeted application(s). In this work, linear and branched diesters for use in lubricant formulations are prepared from lipid-based oleochemicals and their structure-property relationships reported. It is shown that the branched diesters possess exceptional physical property profiles, including suppression of crystallization, and are superior alternatives for use in lubricant formulations. For the linear aliphatic diesters, both high and low temperature properties were predictable functions of total chain length, and both were differently influenced by the fatty acid versus diol chain length. Symmetry did not influence either, although thermal stability decreased and thermal transition temperatures increased with increasing saturation. All of the linear diesters demonstrated Newtonian flow behaviour. Viscosity was also predictable as a function of total chain length; any microstructural features due to structural effects were superseded by mass effects.

  12. Factors impacting the formation of monochloropropanediol (MCPD) fatty acid diesters during palm (Elaeis guineensis) oil production.

    PubMed

    Craft, Brian D; Nagy, Kornél; Sandoz, Laurence; Destaillats, Frédéric

    2012-01-01

    Recently, organic and inorganic chlorinated compounds were detected in crude and commercially refined palm oils. Further, the predominant formation mechanism of monochloropropanediol (MCPD) diesters at high temperatures (>170-180°C) was revealed. The present study involved the development and comparison of solutions to mitigate MCPD diester levels in oils from various stages of palm oil production. Partially refined palm oil samples and oil extracted from fresh palm fruits were submitted to bench-top deodorisation experiments. Application of glycerol and ethanol as refining aids during the deodorisation of refined-bleached palm oil proved to be moderately effective; about 25%-35% reduction of MCPD diester levels was achieved. Washing crude palm oil with ethanol-water (1:1) prior to deodorisation was also an effective strategy yielding an ∼30% reduction of MCPD diester contents. Washing palm fruit pulp before oil extraction, however, was most impactful, resulting in a 95% reduction of MCPD diesters when compared to the deodorised control oil. This suggests that intervention upstream in the process chain is most efficient in reducing levels of these contaminants in refined oils. Following the study, a root-cause analysis was performed in order to map the parameters potentially responsible for the occurrence of MCPD diesters in refined palm oil and related fractions.

  13. 40 CFR 721.5500 - 7-Oxabicyclo[4.1.0]heptane, 3-ethenyl, homopolymer, ether with 2-ethyl-2-(hydroxymethyl)-1,3-pro...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., homopolymer, ether with 2-ethyl-2-(hydroxymethyl)-1,3-pro-pane-diol (3:1), epoxidized. 721.5500 Section 721...-Oxabicyclo heptane, 3-ethenyl, homopolymer, ether with 2-ethyl-2-(hydroxymethyl)-1,3-pro-pane-diol (3:1... 7-oxabicyclo heptane, 3-ethenyl, homopolymer, ether with 2-ethyl-2(hydroxymethyl)-1,3-propanediol...

  14. 40 CFR 721.10400 - Oxirane, 2-ethyl-, polymer with oxirane, mono-C12-14-sec-alkyl ethers.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Oxirane, 2-ethyl-, polymer with... Significant New Uses for Specific Chemical Substances § 721.10400 Oxirane, 2-ethyl-, polymer with oxirane...) The chemical substance identified as oxirane, 2-ethyl-, polymer with oxirane,...

  15. 40 CFR 721.10401 - Oxirane, 2-ethyl-, polymer with oxirane, mono-C11-15-sec-alkyl ethers.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Oxirane, 2-ethyl-, polymer with... Significant New Uses for Specific Chemical Substances § 721.10401 Oxirane, 2-ethyl-, polymer with oxirane...) The chemical substance identified as oxirane, 2-ethyl-, polymer with oxirane, mono...

  16. Reproductive and developmental effects of phthalate diesters in males.

    PubMed

    Kay, Vanessa R; Bloom, Michael S; Foster, Warren G

    2014-07-01

    Phthalate diesters are a diverse group of chemicals used to make plastics flexible and are found in personal care products, medical equipment, and medication capsules. Ubiquitous in the environment, human exposure to phthalates is unavoidable; however, the clinical relevance of low concentrations in human tissues remains uncertain. The epidemiological literature was inadequate for prior reviews to conclusively evaluate the effects of phthalates on male reproductive tract development and function, but recent studies have expanded the literature. Therefore, we conducted a systematic review of the literature focused on the effects of phthalate exposure on the developing male reproductive tract, puberty, semen quality, fertility, and reproductive hormones. We conclude that although the epidemiological evidence for an association between phthalate exposure and most adverse outcomes in the reproductive system, at concentrations to which general human populations are exposed, is minimal to weak, the evidence for effects on semen quality is moderate. Results of animal studies reveal that, although DEHP was the most potent, different phthalates have similar effects and can adversely affect development of the male reproductive tract with semen quality being the most sensitive outcome. We also note that developmental exposure in humans was within an order of magnitude of the adverse effects documented in several animal studies. While the mechanisms underlying phthalate toxicity remain unclear, the animal literature suggests that mice are less sensitive than rats and potentially more relevant to estimating effects in humans. Potential for chemical interactions and effects across generations highlights the need for continued study.

  17. Carbohydrate-Based Initiators for the Cationic Ring-Opening Polymerization of 2-Ethyl-2-Oxazoline.

    PubMed

    Weber, Christine; Gottschaldt, Michael; Hoogenboom, Richard; Schubert, Ulrich S

    2016-01-01

    The advancement in the field of living and controlled polymerization techniques provides the opportunity for careful bottom-up design of polymers for biomedical applications according to their specific needs. This contribution describes the detailed methodology to functionalize poly(2-ethyl-2-oxazoline), a polymer with properties very similar to polyethylene glycol, in a stereo-selective manner with a range of carbohydrates that can serve as biological targeting units. The obtained building blocks can subsequently be applied for the synthesis of more complex polymeric architectures.

  18. Acute effects of exposure to 1 mg/m(3) of vaporized 2-ethyl-1-hexanol in humans.

    PubMed

    Ernstgård, L; Norbäck, D; Nordquist, T; Wieslander, G; Wålinder, R; Johanson, G

    2010-04-01

    The objective was to assess acute effects from controlled exposure of volunteers to 2-ethyl-1-hexanol, a volatile organic compound that is often found in indoor air. Sixteen males and fourteen females were in random order exposed to 1 mg/m(3) of vapors of 2-ethyl-1-hexanol or to clean air (control exposure) in an exposure chamber during 2 h at rest. The subjects performed symptom ratings on Visual Analog Scales. During exposure to 2-ethyl-1-hexanol subjective ratings of smell and eye discomfort were minimally but significantly increased. Ratings of nasal irritation, throat irritation, headache, dyspnoea, fatigue, dizziness, nausea, and intoxication were not significantly affected. No exposure-related effects on measurement of blinking frequency by electromyography, measurement of the eye break-up time, vital staining of the eye, nasal lavage biomarkers, transfer tests, spirometric and rhinometric measures were seen. No differences in response were seen between sexes or between atopics and non-atopics. Practical Implications It is important to assess acute effects in volatile organic compounds like 2-ethyl-1-hexanol. 2-ethyl-1-hexanol is often found in indoor air generated by degradation of plastic building materials or in new buildings. There are associations between 2-ethyl-1-hexanol in indoor air and respiratory effects, eye irritation, headache, and blurred vision. A controlled chamber exposure study in acute effects was performed. In conclusion, this study showed weak subjective symptom of irritation in the eyes.

  19. An altered mechanism of hydrolysis for a metal-complexed phosphate diester.

    PubMed

    Humphry, Tim; Forconi, Marcello; Williams, Nicholas H; Hengge, Alvan C

    2002-12-18

    Isotope effects in the nucleophile and in the leaving group were measured to gain information about the mechanism and transition state of the hydrolysis of methyl p-nitrophenyl phosphate complexed to a dinuclear cobalt complex. The complexed diester undergoes hydrolysis about 1011 times faster than the corresponding uncomplexed diester. The kinetic isotope effects indicate that this rate acceleration is accompanied by a change in mechanism. A large inverse 18O isotope effect in the bridging hydroxide nucleophile (0.937 +/- 0.002) suggests that nucleophilic attack occurs before the rate-determining step. Large isotope effects in the nitrophenyl leaving group (18Olg = 1.029 +/- 0.002, 15N = 1.0026 +/- 0.0002) indicate significant fission of the P-O ester bond in the transition state of the rate-determining step. The data indicate that in contrast to uncomplexed diesters, which undergo hydrolysis by a concerted mechanism, the reaction of the complexed diester likely proceeds via an addition-elimination mechanism. The rate-limiting step is expulsion of the p-nitrophenyl leaving group from the intermediate, which proceeds by a late transition state with extensive bond fission to the leaving group. This represents a substantial change in mechanism from the hydrolysis of uncomplexed aryl phosphate diesters.

  20. A 4-week study of four 3-monochloropropane-1,2-diol diesters on lipid metabolism in C57BL/6J mice.

    PubMed

    Lu, Jing; Wang, Zhenning; Ren, Mengrou; Feng, Guangxin; Ye, Beining; Wang, Yi; Fang, Baochen; Deng, Xuming; Guan, Shuang

    2015-09-01

    3-Monochloropropane-1,2-diol (3-MCPD) esters have been detected in many foods, which have become a new safety issue worldwide. In the study, we investigated the effect of four 3-MCPD diesters (palmitate diester: CDP; stearate diester: CDS; oleate diester: CDO; linoleate diester: CDL) on lipid metabolism in C57BL/6J mice. The results showed that CDP, CDS, CDO and CDL significantly increased the serum TC, LDL-C levels and liver TG, TC levels at dose of 16.5μmol/kg/day. These results indicated that 3-MCPD diesters could potentially cause hyperlipidemia in C57BL/6J mice. Moreover, oil red O staining confirmed fat accumulation in liver induced by 3-MCPD diesters. Our work will provide more information for safety evaluation of 3-MCPD diesters. However, whether free 3-MCPD or free fatty acids or combined action compensates for the hyperlipidemia effects should be elucidated in the future.

  1. Phorbol diesters inhibit enzymatic hydrolysis of diacylglycerols in vitro.

    PubMed Central

    Chabbott, H; Cabot, M C

    1986-01-01

    The effect of phorbol 12-myristate 13-acetate (PMA) on diacylglycerol lipase activity was examined in rat serum, tissue, and cellular preparations by using di[14C]oleoylglycerol, [3H]palmitoylacetylglycerol, and membrane-resident phospholipase C-generated diacylglycerols as substrates. These experiments were conducted to address whether phorbol esters can mimic diacylglycerols in interacting with enzymes other than protein kinase C. Serum hydrolysis of palmitoylacetylglycerol, assayed by the formation of [3H]palmitic acid, was inhibited by PMA, 4-O-methyl-PMA, or phorbol 12,13-dibutyrate (in order of decreasing potency). The hydrolysis of palmitoylacetylglycerol was inhibited more than 40% by the addition of PMA at a 1:1 molar ratio with substrate. The inhibition resembled the competitive type, with a Ki of approximately 2.7 microM. PMA in the 10-60 microM range also inhibited hydrolysis of palmitoylacetylglycerol by lipases from rat brain microsomes and by homogenates of C3H/10T1/2 mouse fibroblasts. PMA was likewise inhibitory when assayed in an intramembrane enzyme-substrate milieu in which diacylglycerols were generated, in situ, by treatment of [3H]palmitate-labeled cell homogenates with phospholipase C. Collectively, these data demonstrate that PMA, which is now thought to act by mimicry of diacylglycerols, can inhibit the action of diacylglycerol lipase. It is possible that such a mechanism is linked to the multiplicity of responses elicited by phorbol diesters and that other agents may function by means of enzyme interactions (post-phospholipase C) to influence the levels of the cellular diacylglycerol mediators. PMID:3458169

  2. Preparation and evaluation of multifunctional branched diesters as fuel property enhancers for biodiesel and petroleum diesel fuels

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A series of eight highly branched diesters were prepared by Fischer esterification of alcohols to acids in high yield that were similar in molecular weight to typical fatty acid methyl esters encountered in biodiesel. Examination of the properties of the synthetic diesters revealed that several poss...

  3. 40 CFR 721.3152 - Ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl sulfates (salts). 721.3152 Section 721... Ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl sulfates... ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl...

  4. 40 CFR 721.3152 - Ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl sulfates (salts). 721.3152 Section 721... Ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl sulfates... ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl...

  5. 40 CFR 721.3152 - Ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl sulfates (salts). 721.3152 Section 721... Ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl sulfates... ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl...

  6. 40 CFR 721.3152 - Ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl sulfates (salts). 721.3152 Section 721... Ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl sulfates... ethanaminium, N-ethyl-2-hydroxy-N,N-bis(2-hydroxyethyl)-, diester with C12-18 fatty acids, ethyl...

  7. Comparing calorimetric and dielectric polarization modes in viscous 2-ethyl-1-hexanol.

    PubMed

    Huth, Heiko; Wang, Li-Min; Schick, Christoph; Richert, Ranko

    2007-03-14

    Dielectric relaxation and dynamic heat capacity measurements are compared for 2-ethyl-1-hexanol near its glass transition temperature Tg in order to further clarify the origin of the prominent Debye-type loss peak observed in many monohydroxy alcohols and other hydrogen-bonding liquids. While the dielectric spectrum epsilon" displays two distinct polarization processes that are separated by a factor of 2000 in terms of the peak frequency, the heat capacity cp" shows only a single peak. The dielectric process with lower amplitude and higher peak frequency coincides with the calorimetric signal, whereas the large dielectric Debye signal is not associated with calorimetric modes. The authors conclude that the Debye process corresponds to a transition among states which differ in energy only in the case of an external electric field.

  8. Method for the purification of bis (2-ethyl-hexyl)phosphoric acid

    DOEpatents

    Schulz, W.W.

    1974-02-19

    Foreign products including the neutral organophosphorous compounds and the iron salts normally present in commercial bis(2ethyl-hexyl) phosphoric acid(HDEHP), and the radiolytic degradation products of HDEHP on exposure of HDEHP to beta and gamma irradiation are removed from HDEHP containing one or more of such products by contacting the said foreign product containing HDEHP with a macroreticular anion exchange resin in base form whereby the DEHP- ion of HDEHP exchanges with the anion of the resin and is thus adsorbed on the resin and the said foreign products are not adsorbed and will pass through a bed of particles of the resin. The adsorbed DEHP- ion is then eluted from the resin and acidified to form and recover the purified HDEHP. (auth)

  9. [HPLC-MS determination of 2-ethyl-6-methyl-3-oxypyridine].

    PubMed

    Baranov, P A; Appolonova, S A; Dikunets, M A; Rodchenkov, G M; Sariev, A K; Zherdev, V P

    2009-01-01

    An HPLC-ESI-MS method has been developed for determining 2-ethyl-6-methyl-3-oxypyridine (EMO) in human urine upon peroral administration of this substance in form ofmexidol. Various sample preparation (extraction) procedures were tested and compared for evaluating the recovery and matrix effect. Solid-phase extraction procedure followed by derivation with dansyl chloride is proposed as a method of choice. The recovery of analyte was 48.1 +/- 3.4%, and the matrix effect was 99.4 +/- 4.1%. The MS and MS/MS spectra of EMO and its dansyl derivatives are presented and interpreted. The analyses were performed using a mass spectrometer of the ion trap type with electrospray ionization at atmospheric pressure, operating in the regime of positive ion detection.

  10. Kinetic resolution of racemic carboxylic acids through asymmetric protolactonization promoted by chiral phosphonous acid diester.

    PubMed

    Sakuma, Masayuki; Sakakura, Akira; Ishihara, Kazuaki

    2013-06-07

    Chiral phosphonium salts induce the kinetic resolution of racemic α-substituted unsaturated carboxylic acids through asymmetric protolactonization. Both the lactones and the recovered carboxylic acids are obtained with high enantioselectivities and high S (= kfast/kslow) values. Asymmetric protolactonization also leads to the desymmetrization of achiral carboxylic acids. Notably, chiral phosphonous acid diester not only induced the enantioselectivity but also promoted protolactonization.

  11. 21 CFR 172.856 - Propylene glycol mono- and diesters of fats and fatty acids.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... with § 172.860 and/or oleic acid derived from tall oil fatty acids in compliance with § 172.862. (b... fatty acids. 172.856 Section 172.856 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... CONSUMPTION Multipurpose Additives § 172.856 Propylene glycol mono- and diesters of fats and fatty...

  12. 40 CFR 721.10414 - Polycyclic polyamine diester organometallic compound (generic) (P-10-358).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Polycyclic polyamine diester organometallic compound (generic) (P-10-358). 721.10414 Section 721.10414 Protection of Environment ENVIRONMENTAL... compound (generic) (P-10-358). (a) Chemical substance and significant new uses subject to reporting....

  13. 40 CFR 721.10414 - Polycyclic polyamine diester organometallic compound (generic) (P-10-358).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Polycyclic polyamine diester organometallic compound (generic) (P-10-358). 721.10414 Section 721.10414 Protection of Environment ENVIRONMENTAL... compound (generic) (P-10-358). (a) Chemical substance and significant new uses subject to reporting....

  14. 40 CFR 721.10414 - Polycyclic polyamine diester organometallic compound (generic) (P-10-358).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polycyclic polyamine diester organometallic compound (generic) (P-10-358). 721.10414 Section 721.10414 Protection of Environment ENVIRONMENTAL... compound (generic) (P-10-358). (a) Chemical substance and significant new uses subject to reporting....

  15. Sulfated diesters of okadaic acid and DTX-1: Self-protective precursors of diarrhetic shellfish poisoning (DSP) toxins.

    PubMed

    Hu, Tingmo; LeBlanc, Patricia; Burton, Ian W; Walter, John A; McCarron, Pearse; Melanson, Jeremy E; Strangman, Wendy K; Wright, Jeffrey L C

    2017-03-01

    Many toxic secondary metabolites used for defense are also toxic to the producing organism. One important way to circumvent toxicity is to store the toxin as an inactive precursor. Several sulfated diesters of the diarrhetic shellfish poisoning (DSP) toxin okadaic acid have been reported from cultures of various dinoflagellate species belonging to the genus Prorocentrum. It has been proposed that these sulfated diesters are a means of toxin storage within the dinoflagellate cell, and that a putative enzyme mediated two-step hydrolysis of sulfated diesters such as DTX-4 and DTX-5 initially leads to the formation of diol esters and ultimately to the release of free okadaic acid. However, only one diol ester and no sulfated diesters of DTX-1, a closely related DSP toxin, have been isolated leading some to speculate that this toxin is not stored as a sulfated diester and is processed by some other means. DSP components in organic extracts of two large scale Prorocentrum lima laboratory cultures have been investigated. In addition to the usual suite of okadaic acid esters, as well as the free acids okadaic acid and DTX-1, a group of corresponding diol- and sulfated diesters of both okadaic acid and DTX-1 have now been isolated and structurally characterized, confirming that both okadaic acid and DTX-1 are initially formed in the dinoflagellate cell as the non-toxic sulfated diesters.

  16. Free radical mediated formation of 3-monochloropropanediol (3-MCPD) fatty acid diesters.

    PubMed

    Zhang, Xiaowei; Gao, Boyan; Qin, Fang; Shi, Haiming; Jiang, Yuangrong; Xu, Xuebing; Yu, Liangli Lucy

    2013-03-13

    The present study was conducted to test the hypothesis that a free radical was formed and mediated the formation of 3-monochloropropanediol (3-MCPD) fatty acid diesters, a group of food contaminants, from diacylglycerols at high temperature under a low-moisture condition for the first time. The presence of free radicals in a vegetable oil kept at 120 °C for 20 min was demonstrated using an electron spin resonance (ESR) spectroscopy examination with 5,5-dimethylpyrroline-N-oxide (DMPO) as the spin trap agent. ESR investigation also showed an association between thermal treatment degree and the concentration of free radicals. A Fourier transform infrared spectroscopy (FT-IR) analysis of sn-1,2-stearoylglycerol (DSG) at 25 and 120 °C suggested the possible involvement of an ester carbonyl group in forming 3-MCPD diesters. On the basis of these results, a novel free radical mediated chemical mechanism was proposed for 3-MCPD diester formation. Furthermore, a quadrupole-time of flight (Q-TOF) MS/MS investigation was performed and detected the DMPO adducts with the cyclic acyloxonium free radical (CAFR) and its product MS ions, proving the presence of CAFR. Furthermore, the free radical mechanism was validated by the formation of 3-MCPD diesters through reacting DSG with a number of organic and inorganic chlorine sources including chlorine gas at 120 and 240 °C. The findings of this study might lead to the improvement of oil and food processing conditions to reduce the level of 3-MCPD diesters in foods and enhance food safety.

  17. Enhanced aqueous solubility of polycyclic aromatic hydrocarbons by green diester-linked cationic gemini surfactants and their binary solutions

    NASA Astrophysics Data System (ADS)

    Panda, Manorama; Fatma, Nazish; Kabir-ud-Din

    2016-07-01

    Three homologues of a novel biodegradable diester-linked cationic gemini surfactant series, CmH2m+1 (CH3)2N+(CH2COOCH2)2N+(CH3)2CmH2m+1.2Cl- (m-E2-m; m = 12, 14, 16), were used for investigation of the solubilization of polycyclic aromatic hydrocarbons (PAHs) such as naphthalene, anthracene and pyrene in single as well as binary surfactant solutions. Physicochemical parameters of the pure/mixed systems were derived by conductivity and surface tension measurements. Dissolution capacity of the equimolar binary surfactant solutions towards the PAHs was studied from the molar solubilization ratio (MSR), micelle-water partition coefficient (Km) and free energy of solubilization (ΔGs0) of the solubilizates. Influence of hydrophobic chain length of the dimeric surfactants on solubilization was characterized. Aqueous solubility of the PAHs was enhanced linearly with concentration of the surfactant in all the pure and mixed gemini-gemini surfactant systems.

  18. Thermal and mechanical properties of polylactic acid (PLA) and bagasse carboxymethyl cellulose (CMCB) composite by adding isosorbide diesters

    NASA Astrophysics Data System (ADS)

    Kamthai, Suthaphat; Magaraphan, Rathanawan

    2015-05-01

    An isosorbide diesters is one of isororbide types used as a plasticizer. The influence of this plasticizer on thermal and mechanical properties of polylactic acid and bagasse carboxymethyl cellulose (PLA/CMCB) composites was studied. PLA was blended with CMCB at 1%wt using various contents of isosorbide diesters (5, 10, 15 and 20%wt of PLA). The differential scanning calorimetric (DSC) and thermogravimetric (TGA) analyses indicated that the increment of isosorbide diesters concentration resulted in decreasing glass transition, melting and decomposition temperatures, as well as the reduction of storage modulus of PLA/CMCB composites. Moreover, the elongation of PLA/CMCB composites was significantly improved with increasing plasticizer content.

  19. Salt-enhanced removal of 2-ethyl-1-hexanol from aqueous solutions by adsorption on activated carbon.

    PubMed

    Chang, Ganggang; Bao, Zongbi; Zhang, Zhiguo; Xing, Huabin; Su, Baogen; Yang, Yiwen; Ren, Qilong

    2013-12-15

    2-Ethyl-1-hexanol has extensive industrial applications in solvent extraction, however, in view of its potential pollution to environment, the removal and recovery of 2-ethyl-1-hexanol is considered an essential step toward its sustainable use in the future. In this work, we report the removal of 2-ethyl-1-hexanol from aqueous solutions containing salts in high concentrations by adsorption on a coal-based activated carbon. Adsorption thermodynamics showed that the experimental isotherms were conformed well to the Langmuir equation. Also it was found that inorganic salts, i.e. MgCl2 and CaCl2 in high concentration significantly enhanced the adsorption capacity from 223 mg/g in the deionized water to 277 mg/g in a saline water. This phenomenon of adsorption enhancement could be ascribed to the salt-out effect. Kinetic analysis indicated that adsorption kinetics follows the pseudo-second-order equation and the adsorption rate constants increase with the salt concentration. The dynamic breakthrough volume and adsorbed amount of 2-ethyl-1-hexanol were significantly elevated when the salt is present in the water. The dynamic saturated adsorption amount increased from 218.3mg/g in the deionized water to 309.5mg/g in a salt lake brine. The Tomas model was well applied to predict the breakthrough curves and determine the characteristics parameters of the adsorption column.

  20. Fetal and Childhood Exposure to Phthalate Diesters and Cognitive Function in Children Up to 12 Years of Age: Taiwanese Maternal and Infant Cohort Study

    PubMed Central

    Huang, Han-Bin; Chen, Hsin-Yi; Su, Pen-Hua; Huang, Po-Chin; Sun, Chien-Wen; Wang, Chien-Jen; Chen, Hsiao-Yen

    2015-01-01

    Few studies have examined the association between environmental phthalate exposure and children’s neurocognitive development. This longitudinal study examined cognitive function in relation to pre-and postnatal phthalate exposure in children 2–12 years old. We recruited 430 pregnant women in their third trimester in Taichung, Taiwan from 2001–2002. A total of 110, 79, 76, and 73 children were followed up at ages 2, 5, 8, and 11, respectively. We evaluated the children’s cognitive function at four different time points using the Bayley and Wechsler tests for assessing neurocognitive functions and intelligence (IQ). Urine samples were collected from mothers during pregnancy and from children at each follow-up visit. They were analyzed for seven metabolite concentrations of widely used phthalate esters. These esters included monomethyl phthalate, monoethyl phthalate, mono-butyl phthalate, mono-benzyl phthalate, and three metabolites of di(2-ethylhexyl) phthalate, namely, mono-2-ethylhexyl phthalate, mono(2-ethyl-5-hydroxyhexyl) phthalate, and mono(2-ethyl-5-oxohexyl) phthalate. We constructed a linear mixed model to examine the relationships between the phthalate metabolite concentrations and the Bayley and IQ scores. We found significant inverse associations between the children’s levels of urinary mono(2-ethyl-5-oxohexyl) phthalate and the sum of the three metabolites of di(2-ethylhexyl) phthalate and their IQ scores (β = -1.818; 95% CI: -3.061, -0.574, p = 0.004 for mono(2-ethyl-5-oxohexyl) phthalate; β = -1.575; 95% CI: -3.037, -0.113, p = 0.035 for the sum of the three metabolites) after controlling for maternal phthalate levels and potential confounders. We did not observe significant associations between maternal phthalate exposure and the children’s IQ scores. Children’s but not prenatal phthalate exposure was associated with decreased cognitive development in the young children. Large-scale prospective cohort studies are needed to confirm

  1. RIFM fragrance ingredient safety assessment, 2-ethyl-1-butanol, CAS Registry Number 97-95-0.

    PubMed

    Api, A M; Belsito, D; Bhatia, S; Bruze, M; Calow, P; Dagli, M L; Dekant, W; Fryer, A D; Kromidas, L; La Cava, S; Lalko, J F; Lapczynski, A; Liebler, D C; Miyachi, Y; Politano, V T; Ritacco, G; Salvito, D; Schultz, T W; Shen, J; Sipes, I G; Wall, B; Wilcox, D K

    2016-11-01

    The use of this material under current conditions is supported by existing information. This material was evaluated for genotoxicity, repeated dose toxicity, developmental and reproductive toxicity, local respiratory toxicity, phototoxicity/photoallergenicity, skin sensitization, as well as environmental safety. Data from the suitable read across analog 2-ethylhexanol (CAS # 104-76-7) show that this material is not genotoxic. Data from the suitable read across analog isopropyl alcohol (CAS # 67-63-0) show that this material does not have skin sensitization potential. The local respiratory toxicity endpoint was completed using the TTC (Threshold of Toxicological Concern) for a Cramer Class I material (1.4 mg/day). The repeated dose toxicity endpoint was completed using 2-ethylhexanol (CAS # 104-76-7) and 1-heptanol, 2-propyl (CAS # 10042-59-8) as suitable read across analogs, which provided a MOE > 100. The developmental and reproductive toxicity endpoint was completed using 2-ethyl-hexanol (CAS # 104-76-7) and isobutyl alcohol (CAS # 78-83-1) as suitable read across analogs, which provided a MOE > 100. The phototoxicity/photoallergenicity endpoint was completed based on suitable UV spectra. The environmental endpoint was completed as described in the RIFM Framework.

  2. Self-assembled structures and excellent surface properties of a novel anionic phosphate diester surfactant derived from natural rosin acids.

    PubMed

    Li, Juan; Lin, Hai-Xia; Chen, Xiao-Yu; Zhu, Jun-Rong; Yang, Ming-Sheng; Yang, Jun; Han, Chun-Rui

    2017-01-15

    A novel anionic rosin-based phosphate diester sodium (DDPDS) was successfully synthesized from raw dehydroabietic acid, a natural raw material, via four-step reactions: acylation, esterification, phosphorylation and neutralization. Nuclear magnetic resonance ((13)C NMR) and Fourier transform infrared spectroscopy (FT-IR) were used to characterize the structure of target products. The aggregation behaviors in aqueous-ethanol solution and surface properties of DDPDS and its mixed systems were investigated by transmission electron microscopy (TEM), automatic tensiometer and contact angle measuring instrument. The results showed that DDPDS had high surface activity, unexpected emulsification and excellent wettability. The critical micelle concentration (CMC) of 1.35g∗L(-1), the minimum surface tension (γcmc) of 31.75mN∗m(-1), emulsifying power of 153s and the minimum contact angle of 13.4° were determined for DDPDS. Spherical vesicles with diameter about 50nm and 5μm were self-assembled respectively in aqueous-ethanol solution when DDPDS concentration is about 1 CMC and 5 CMC. Two surfactant ionic self-assembly systems were constructed by mixing DDPDS with sodium dodecylbenzenesulfonate (SDBS) and cetyltrimethylammonium bromide (CTAB), which forms 40nm and 20nm spherical micelles in 1 CMC aqueous-ethanol solution. Possible formation mechanisms of surfactant ionic self-assembly systems on a combination of ionic interactions between DDPDS and SDBS or CTAB are discussed. It was found that there were an obvious synergistic effect of foam stability in DDPDS/SDBS mixed system and an obvious synergistic effect of foam capability in DDPDS/CTAB mixed system.

  3. 40 CFR 721.7700 - Poly(oxy-1,2-ethanediyl), α-hydro-ω-(oxiranylmethoxy)-, ether with 2-ethyl-2-(hydroxymethyl)-1,3...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-(oxiranylmethoxy)-, ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1). 721.7700 Section 721.7700... Poly(oxy-1,2-ethanediyl), α-hydro-ω-(oxiranylmethoxy)-, ether with 2-ethyl-2-(hydroxymethyl)-1,3... substance identified as poly(oxy-1,2-ethanediyl),α-hydro-ω-(oxiranylmethoxy)-, ether with...

  4. Molecular dynamics changes induced by solvent in 2-ethyl-1-hexanol.

    PubMed

    Pawlus, Sebastian; Paluch, Marian; Dzida, Marzena

    2011-09-01

    Apart from other classes of materials, supramolecular structures may exist in H-bonded liquids due to the existence of hydrogen bonding. The dynamics of these structures remains one of the most exciting topics of interest of modern science because of its crucial meaning for the behavior of water and its participation in biological processes. A special group of these liquids form monohydroxy alcohols due to their similarity to water, their ability to vitrification, and the existence of the Debye relaxation process in dielectric loss spectra reflecting the dynamics of H-bond structures. Dynamics of these structures can be studied by changes of thermodynamic conditions, by immersion of the liquid into the constraint geometry, and by dilution in a nonassociated solvent. Herein we studied the behavior of relaxation dynamics of mixtures of 2-ethyl-1-hexanol with bromobutane using broadband dielectric spectroscopy. Analysis of the results exhibits the existence of crossover in temperature dependence of static permittivity of the Debye process at some particular temperature T(c). This temperature shifts to lower values with increasing concentration of bromobutane. Moreover, below some "critical" concentration of alcohol in the mixture the shape of the Debye process loses exponentiality and the temperature dependence of relaxation times starts to change. This change was illuminated based on the analysis of the steepness index. For the lowest concentration, the value of this parameter becomes the same as the value of the steepness index of faster relaxation, called process II, of pure alcohol at ambient pressure. The observed change in relaxation dynamics with lowering concentration of alcohol is astonishingly similar to the behavior observed in the same material at elevated pressure. A possible origin of these similarities is also discussed.

  5. Comparisons of phosphorothioate with phosphate transfer reactions for a monoester, diester, and triester: isotope effect studies.

    PubMed

    Catrina, Irina E; Hengge, Alvan C

    2003-06-25

    Phosphorothioate esters are sometimes used as surrogates for phosphate ester substrates in studies of enzymatic phosphoryl transfer reactions. To gain better understanding of the comparative inherent chemistry of the two types of esters, we have measured equilibrium and kinetic isotope effects for several phosphorothioate esters of p-nitrophenol (pNPPT) and compared the results with data from phosphate esters. The primary (18)O isotope effect at the phenolic group ((18)k(bridge)), the secondary nitrogen-15 isotope effect ((15)k) in the nitro group, and (for the monoester and diester) the secondary oxygen-18 isotope effect ((18)k(nonbridge)) in the phosphoryl oxygens were measured. The equilibrium isotope effect (EIE) (18)k(nonbridge) for the deprotonation of the monoanion of pNPPT is 1.015 +/- 0.002, very similar to values previously reported for phosphate monoesters. The EIEs for complexation of Zn(2+) and Cd(2+) with the dianion pNPPT(2-) were both unity. The mechanism of the aqueous hydrolysis of the monoanion and dianion of pNPPT, the diester ethyl pNPPT, and the triester dimethyl pNPPT was probed using heavy atom kinetic isotope effects. The results were compared with the data reported for analogous phosphate monoester, diester, and triester reactions. The results suggest that leaving group bond fission in the transition state of reactions of the monoester pNPPT is more advanced than for its phosphate counterpart pNPP, while alkaline hydrolysis of the phosphorothioate diester and triester exhibits somewhat less advanced bond fission than that of their phosphate ester counterparts.

  6. Binding and hydrolysis studies of antitumoural titanocene dichloride and Titanocene Y with phosphate diesters.

    PubMed

    Erxleben, Andrea; Claffey, James; Tacke, Matthias

    2010-04-01

    The interaction of the antitumoural metallocene dihalides, titanocene dichloride (Cp(2)TiCl(2)) and Titanocene Y (bis-[(p-methoxybenzyl)cyclopentadienyl]titanium(IV) chloride), with bis(4-nitrophenyl) phosphate (BNPP), which is a widely used model for the phosphate diester linkages in DNA, has been studied. Cp(2)TiCl(2) has been shown to promote the cleavage of the phosphate diester in weakly acidic solution. At pH 4, 37 degrees C, a 10(6)-fold rate acceleration over the uncatalysed reaction was observed under pseudo-first-order conditions, when freshly prepared solutions of Cp(2)TiCl(2) were applied. The activity of aged solutions dropped significantly due to the formation of insoluble precipitates of hydrolysed Ti species. The precipitates isolated from aged solutions were shown to act as moderately active, heterogeneous catalysts for BNPP cleavage. By contrast, no hydrolysis of the phosphate diester could be observed in the presence of Titanocene Y. Implications for the mode of action of the apoptosis-inducing metallocene dihalides are discussed.

  7. Effect of anions on the cloud point temperature of aqueous poly(2-ethyl-2-oxazoline) solutions.

    PubMed

    Tatar Güner, Pınar; Demirel, A Levent

    2012-12-13

    Poly(2-alkyl-2-oxazoline)s have recently gained attention in especially biological applications due to their lower critical solution temperature being close to the body temperature and their biocompatibility. The understanding of how cloud point temperature (T(c)) depends on the salt concentration and the molecular mechanisms responsible for such behavior are important to tune T(c) as desired by the applications. In this paper, we report the effect of a series of sodium salts on T(c) of aqueous poly(2-ethyl-2-oxazoline) (PEOX) solutions by dynamic light scattering. PEOX samples having four different molecular weights were investigated, and the results were compared with those of poly(N-isopropylacrylamide) (PNIPAM), the mostly investigated and used thermoresponsive polymer. Kosmotropic anions decreased T(c) linearly while chaotropic anions increased T(c) nonlinearly with salt concentration. The contributions of different mechanisms to T(c) change have been discussed. Our results indicate that the dominant mechanism is the dehydration of PEOX for divalent kosmotropic anions (CO(3)(2-), SO(4)(2-), S(2)O(3)(2-)) and direct binding for chaotropic anions (NO(3)(-), I(-), ClO(4)(-), SCN(-)). For the remaining monovalent kosmotropic anions (H(2)PO(4)(-), F(-), Cl(-), Br(-)), a combination of dehydration and surface tension mechanisms was in effect. The additional contribution of the surface tension mechanism for the monovalent kosmotropic anions was inferred for different molecular weight PEOX samples and also for PNIPAM. With PEOX molecular weight decreasing from 500,000 to 5000 g/mol, T(c) decreased less with salt concentration which was attributed to the contribution of the surface tension mechanism. For PEOX samples, the decrease of T(c) with kosmotropic anion concentration was faster compared to PNIPAM due to differences in their chemical structure. Our results show that the molecular mechanisms of interactions between PEOX chains and specific anions can simply be

  8. Relationship between the effects on bacterial activity of selected disinfectants and the hydrophobic characters of dibasic acid diesters.

    PubMed

    Furuta, T; Kihara, K

    1992-05-01

    We prepared test solutions which contained 80% (v/v) ethanol and 0.2% (w/v) chlorhexidine (CH) or benzalkonium chloride (BC) with or without a dibasic acid diester. After complete evaporation of the ethanol from the solution on filter paper, an overnight broth culture (Staphylococcus aureus) was repeatedly inoculated onto the filter paper, and viable bacterial counts were measured at 5 min after the last inoculation. By comparison with viable counts for CH or BC alone, we estimated the potentiating effects of dibasic acid diester on the bactericidal activity of CH or BC, and confirmed that this activity of the two disinfectants was potentiated in the presence of certain compounds in the homologs of di-n-butyl esters of aliphatic dibasic acid, and di-alkyl esters of adipic and phthalic acid. Diisobutyl adipate, one of the most effective diesters, substantially enhanced the bactericidal activities of benzethonium chloride, cetyl pyridinium chloride and didecyl dimethyl ammonium chloride, as well as CH and BC, but not those of polyhexamethylene biguanide or alkyldiaminoethyl glycinate. The potentiating effects of dibasic acid diesters observed for both CH and BC seemed to be affected by the hydrophobic character of these diesters themselves and are also expressed well by a particular quadratic equation as a function of these characters: namely, capacity factors, as determined by high-performance liquid chromatography.

  9. Phorbol diesters and transferrin modulate lymphoblastoid cell transferrin receptor expression by two different mechanisms

    SciTech Connect

    Alcantara, O.; Phillips, J.L.; Boldt, D.H.

    1986-12-01

    Expression of transferrin receptors (TfR) by activated lymphocytes is necessary for lymphocyte DNA synthesis and proliferation. Regulation of TfR expression, therefore, is a mechanism by which the lymphocyte's proliferative potential may be directed and controlled. The authors studied mechanisms by which lymphoblastoid cells modulate TfR expression during treatment with phorbol diesters or iron transferrin (FeTf), agents which cause downregulation of cell surface TfR. Phorbol diester-induced TfR downregulation occurred rapidly, being detectable at 2 min and reaching maximal decreases of 50% by 15 min. It was inhibited by cold but not by agents that destabilize cytoskeletal elements. Furthermore, this downregulation was reversed rapidly by washing or by treatment with the membrane interactive agent, chlorpromazine. In contrast, FeTf-induced TfR downregulation occurred slowly. Decreased expression of TfR was detectable only after 15 min and maximal downregulation was achieved after 60 min. Although FeTf-induced downregulation also was inhibited by cold, it was inhibited in addition by a group of microtubule destabilizing agents (colchicine, vinblastine, podophyllotoxin) or cytochalasin B, a microfilament inhibitor. Furthermore, FeTf-induced downregulation was not reversed readily by washing or by treatment with chlorpromazine. Phorbol diesters cause TfR downregulation by a cytoskeleton-independent mechanism. These data indicate that TfR expression is regulated by two independent mechanisms in lymphoblastoid cells, and they provide the possibility that downregulation of TfR by different mechanisms may result in different effects in these cells.

  10. ZrIV-tetraphenylporphyrinates as nuclease mimics: structural, kinetic and mechanistic studies on phosphate diester transesterification.

    PubMed

    Stulz, E; Bürgi, H B; Leumann, C

    2000-02-04

    The Zr(IV)-tetraphenylpor-phyrinates Zr(TPP)(X,X'), (X,X' = -OAc, -OMe, Cl ) 4-6, 8 were prepared and their complexing properties as well as catalytic properties towards solvolysis of the phosphate diesters hpp (2), dmp (3) and pmp (16) characterised. The diesters 2 and 16, representing model phosphates for RNA and DNA, were substrates for the catalyst Zr(TPP)Cl2 (4), and rate accelerations over background by 6-9 orders of magnitude were measured. These accelerations are comparable to those of dinuclear transition metal catalysts and lanthanide ions. Catalytic turnover was observed. Kinetic studies revealed that the catalytically active species of 4 in the solvolysis of 2 and 16 in methanol-containing solvents are dinuclear complexes containing either one or two phosphate esters depending upon the phosphate concentration. Besides the usual solvolysis pathway of the RNA model hpp (2), which proceeds via the cyclophosphate 20, a second, unusual pathway via direct substitution of the hydroxypropyl substituent was found. X-ray analysis of the Zr(TPP)(dmp) complex 19 revealed a dinuclear structure with two bridging dmp ligands and one monomethyl phosphate unit. In 19 one of the two dmp residues occurs in a very unusual high energy ac,ap conformation. Based on this structure and on the kinetic data, mechanistic models for the two solvolysis reaction pathways were developed. From an extensive CSD search on phosphodiester structures no correlation between P-O ester bond lengths and diester conformations could be found. However, P-O ester bonds decrease in length with increasing formal charge of the complexing metal ions. This underlines the higher importance of electrostatic activation relative to stereoelectronic effects in phosphodiester hydrolysis.

  11. Combined strategies of apomorphine diester prodrugs and nanostructured lipid carriers for efficient brain targeting

    NASA Astrophysics Data System (ADS)

    Liu, Kuo-Sheng; Wen, Chih-Jen; Yen, Tzu-Chen; Sung, K. C.; Ku, Ming-Chuan; Wang, Jhi-Joung; Fang, Jia-You

    2012-03-01

    Our aim is to develop nanostructured lipid carriers (NLCs) for loading the apomorphine diester prodrugs, diacetyl apomorphine (DAA) and diisobutyryl apomorphine (DIA), into the brain. NLCs were prepared using sesame oil/cetyl palmitate as the lipid matrices. Experiments were performed with the objective of evaluating the physicochemical characteristics, drug release, safety and brain-targeting efficacy of the NLCs. The size of regular NLCs (N-NLCs) was 214 nm. The addition of Forestall (FE) and polyethylene glycol (PEG) to the NLCs (P-NLCs) increased the particle diameter to 250 nm. The zeta potentials of N-NLCs and P-NLCs were respectively shown to be - 21 and 48 mV. Diester prodrugs were more lipophilic and more chemically stable than the parent apomorphine. The hydrolysis study indicated that the prodrugs underwent bioconversion in plasma and brain extract, with DAA exhibiting faster degradation than DIA. Sustained release was achieved through the synergistic effect of integrating strategies of prodrugs and NLCs, with the longer carbon chain showing the slower release (DIA < DAA). None of the NLCs tested here exhibited a toxicity problem according to the examination of neutrophil lactate dehydrogenase (LDH) release and hemolysis. Results of a bioimaging study in mice showed that P-NLCs largely accumulated in the brain. The distribution duration of the fluorescent dye in the brain region was also prolonged by the nanocarriers.

  12. Transcriptomics and proteomic studies reveal acaricidal mechanism of octadecanoic acid-3, 4 - tetrahydrofuran diester against Sarcoptes scabiei var. cuniculi

    PubMed Central

    Song, Xu; Chen, Zhenzhen; Jia, Renyong; Cao, Mei; Zou, Yuanfeng; Li, Lixia; Liang, Xiaoxia; Yin, Lizi; He, Changliang; Yue, Guizhou; Yin, Zhongqiong

    2017-01-01

    In our previous study, a new compound, octadecanoic acid-3, 4-tetrahydrofuran diester, possessing potent acaricidal activity was obtained from neem oil. This study performed RNA-seq transcriptomics and iTRAQ proteomics to uncover the acaricidal mechanism of the compound against Sarcoptes scabiei var. cuniculi. The results of transcriptomics indicated that after treatment with octadecanoic acid-3, 4-tetrahydrofuran diester, genes related to “Energy metabolism” were significantly up-/down-regulated, including citrate cycle, oxidative phosphorylation pathway and fatty acid metabolism. Proteomics analysis showed accordant changes of proteins related to oxidative phosphorylation pathway. The target proteins of the compound were NADH dehydrogenase, Ubiquinol-cytochrome c reductase, Cytochrome c oxidase, ATP synthase, enolase and superoxide dismutase. In transcriptomics-proteomics correlation analysis, the concordance rate between protein abundances and their corresponding mRNAs was 57%, while others (43%) were discordant changes, suggesting divergent regulating effects of octadecanoic acid-3, 4-tetrahydrofuran diester. These results suggested that the acaricidal mechanism of octadecanoic acid-3, 4-tetrahydrofuran diester attributed to interference with energy metabolism, especially oxidative phosphorylation pathway. PMID:28361965

  13. Formation mechanisms of monochloropropanediol (MCPD) fatty acid diesters in refined palm (Elaeis guineensis) oil and related fractions.

    PubMed

    Destaillats, Frédéric; Craft, Brian D; Sandoz, Laurence; Nagy, Kornél

    2012-01-01

    Monochloropropanediol (MCPD) fatty acid esters are process contaminants generated during the deodorisation of edible oils. In particular, MCPD diesters are found in higher abundance in refined palm oil than other edible oils. In the present study, a series of model reactions mimicking palm oil deodorisation has been conducted with pure acylglycerols in the presence or absence of either organic or inorganic chlorine-containing compounds. Results showed that the bulk of MCPD diesters are formed above 200°C through the reaction of organochlorines with triacylglycerols (TAG). Additional experiments confirmed that this reaction can be initiated during palm oil deodorisation by hydrogen chloride (HCl) gas evolved through the thermal degradation of organochlorines present in the oil. Therein, the majority of the ultimately produced MCPD diesters are the result of HCl reacting with TAG, via protonation, followed by the elimination of a fatty acid residue. Two possible MCPD diester formation mechanisms are highlighted, both of which involve acyloxonium ion reactive intermediates. Investigations with pure TAG regio-isomers showed that MCPD ester formation is regioselective and the sn-1(3) position of the glycerol backbone is favoured.

  14. Dopant effects on 2-ethyl-1-hexanol: A dual-channel impedance spectroscopy and neutron scattering study

    SciTech Connect

    Singh, Lokendra P.; Richert, Ranko; Raihane, Ahmed; Alba-Simionesco, Christiane

    2015-01-07

    A two-channel impedance technique has been used to study the relaxation behavior of 2-ethyl-1-hexanol with polar and non-polar dopants at the few percent concentration level over a wide temperature and frequency range. The non-polar dopants shift both the Debye and the primary structural relaxation time in the same direction, to shorter times for 3-methylpentane and to longer times for squalane, consistent with the relative glass transition temperatures (T{sub g}) of the components. By contrast, polar dopants such as water or methanol modify the α-process towards slower dynamics and increased amplitude, while the Debye process is accelerated and with a decreased amplitude. This effect of adding water to alcohol is explained by water promoting more compact structures with reduced Kirkwood correlation factors. This picture is consistent with a shift in the neutron scattering pre-peak to lower scattering vectors and with simulation work on alcohol-water systems.

  15. [Role of mexidol (2-ethyl-6-methyl-3-hydroxypyridine succinate) in the obtaining of stabilized magnetite nanoparticles for biomedical application].

    PubMed

    Vazhnichaya, Ye M; Mokliak, Ye V; Kurapov, Yu A; Zabozlaev, A A

    2015-01-01

    Magnetite nanoparticles (NPs) are studied as agents for magnetic resonance imaging, hyperthermia of malignant tumors, targeted drug delivery as well as anti-anemic action. One of the main problems of such NPs is their aggregation that requires creation of methods for magnetite NPs stabilization during preparation of liquid medicinal forms on their basis. The present work is devoted to the possibility of mexidol (2-ethyl-6-methyl-3-hydroxypyridine succinate) use for solubilization of magnetite NPs in hydrophilic medium. For this purpose, the condensate produced by electron-beam evaporation and condensation, with magnetite particles of size 5-8 nm deposited into the crystals of sodium chloride were used in conjunction with substance of mexidol (2-ethyl-6-methyl-3-hydroxypyridine succinate), and low molecular weight polyvinylpyrrolidone (PVP). The NP condensate was dispersed in distilled water or PVP or mexidol solutions. NPs size distribution in the liquid phase of the systems was determined by photon correlation spectroscopy, iron (Fe) concentration was evaluated by atomic emission spectrometry. It is shown that in the dispersion prepared in distilled water, the major amount of NPs was of 13-120 nm in size, in mexidol solution - 270-1700 nm, in PVP solution - 30-900 nm. In the fluid containing magnetite NPs together with mexidol and PVP, the main fraction (99.9%) was characterized by the NPs size of 14-75 nm with maximum of 25 nm. This system had the highest iron concentration: it was similar to that in the sample with mexidol solution and 6.6-7.3 times higher than the concentration in the samples with distilled water or PVP. Thus, in the preparation of aqueous dispersions based on magnetite NPs condensate, mexidol provides a transition of Fe to the liquid phase in amount necessary to achieve its biological activity, and PVP stabilizes such modified NPs.

  16. X-ray diffraction study of thermotropic liquid crystalline polyesters and diester model compounds

    NASA Astrophysics Data System (ADS)

    Chin, H. H.; Azaroff, L. V.; Griffin, A. C.

    1987-10-01

    Two nematic liquid crystalline polyesters were examined by X-ray diffraction following quenching from the nematic temperature in a magnetic field of 15 tesla. It was not possible to quench an aligned nematic glass; instead a polycrystalline phase showing some preferred orientation or an unoriented nematic melt yielded monodomain nematic diffraction patterns with one resembling that of a fiber (crystalline) photograph while the other showed good nematic alignment which could be enhanced slightly by annealing. A series of Siamese-twin diester model compounds also examined at their respective nematic temperatures in a magnetic field of compounds also were examined at their crystalline phase at room temperature. All displayed well-aligned nematic monodomains above the crystallization point.

  17. Stimulation of dopamine synthesis and activation of tyrosine hydroxylase by phorbol diesters in rat striatum

    SciTech Connect

    Onali, P.; Olianas, M.C.

    1987-03-23

    In rat striatal synaptosomes, 4..beta..-phorbol 12-myristate 13-acetate (PMA) and 4 ..beta..-phorbol 12,13-dibutyrate (PDBu), two activators of Ca/sup 2 +/-phospholipid-dependent protein kinase (protein kinase C) increased dopamine (DA) synthesis measured by following the release of /sup 14/CO/sub 2/ from L-(1-/sup 14/C) tyrosine. Maximal stimulation (21-28% increase of basal rate) was produced by 0.5 ..mu..M PMA and 1 ..mu..M PDBu. 4 ..beta..-Phorbol and 4 ..beta..-phorbol 13-acetate, which are not activators of protein kinase C, were ineffective at 1 ..mu..M. PMA did not change the release of /sup 14/CO/sub 2/ from L-(1-/sup 14/C)DOPA. Addition of 1 mM EGTA to a Ca/sup 2 +/-free incubation medium failed to affect PMA stimulation. KCl (60 mM) enhanced DA synthesis by 25%. Exposure of synaptosomes to either PMA or PDBu prior to KCl addition resulted in a more than additive increase (80-100%) of DA synthesis. A similar synergistic effect was observed when the phorbol diesters were combined with either veratridine or d-amphetamine but not with forskolin and dibutyryl cyclic AMP. Pretreatment of striatal synaptosomes with phorbol diesters produced an activation of tyrosine hydroxylase (TH) associated with a 60% increase of the Vmax and a decrease of the Km for the pterine cofactor 6-methyl-5,6,7,8-tetrahydropterin. These results indicate that protein kinase C participates in the regulation of striatal TH in situ and that its activation may act synergistically with DA releasing agents in stimulating DA synthesis. 37 references, 3 figures, 3 tables.

  18. The tribological chemistry of the triazine derivative additives in rape seed oil and synthetic diester

    NASA Astrophysics Data System (ADS)

    Qiao, Rui; Li, Jing; Wu, Hua; Ren, Tianhui; Zhao, Yidong; Ma, Chenyan

    2011-02-01

    The additives, laurylamino-methylthio-1,3,5-triazine-2,4-dithiol (referred to as TRLA) and diisooctylamino-methylthio-1,3,5-triazine-2,4-dithiol (referred to as TREA), were prepared in our laboratory. The products were characterized by means of infrared spectroscopy (IR) and elemental analysis. Their tribological behaviors as additives in raped seed oil and diester were evaluated using four-ball friction and wear testers as well. The results suggest that all the synthesized compounds have excellent tribological behaviors and they were compared with sulfurized isobutene (referred to as SIB) which is a commercial additive. The results show that they have good tribological properties. The two additives were investigated on thermal films and tribofilms by using X-ray absorption near edge structure (XANES) spectroscopy. The results of surface analysis reveal that the thermal films formed from TREA and TRLA in rape seed oil (referred to as RSO) and diester (referred to as DE), all are consist of iron sulfate; under mild AW conditions, the tribofilms from TRLA and TREA in DE is mainly composed of FeS, while the tribochemcal film from TRLA in RSO is mainly composed of iron sulfite; under EP-1 (the maximum non-seizure load) conditions, the tribochemical films from TRLA and TREA in RSO and DE mainly consist of FeS and FeSO4; under EP-2 (nearly weld load) conditions, the tribochemical films from TRLA and TREA in RSO and DE mainly consist of FeS.

  19. Evaluation of the DNA damaging potential of cannabis cigarette smoke by the determination of acetaldehyde derived N2-ethyl-2'-deoxyguanosine adducts.

    PubMed

    Singh, Rajinder; Sandhu, Jatinderpal; Kaur, Balvinder; Juren, Tina; Steward, William P; Segerbäck, Dan; Farmer, Peter B

    2009-06-01

    Acetaldehyde is an ubiquitous genotoxic compound that has been classified as a possible carcinogen to humans. It can react with DNA to form primarily a Schiff base N(2)-ethylidene-2'-deoxyguanosine (N(2)-ethylidene-dG) adduct. An online column-switching valve liquid chromatography tandem mass spectrometry (LC-MS/MS) selected reaction monitoring (SRM) method was developed for the determination of N(2)-ethylidene-dG adducts in DNA following reduction with sodium cyanoborohydride (NaBH(3)CN) to the chemically stable N(2)-ethyl-2'-deoxyguanosine (N(2)-ethyl-dG) adduct. Accurate quantitation of the adduct was obtained by the addition of the [(15)N(5)]N(2)-ethyl-dG stable isotope-labeled internal standard prior to enzymatic hydrolysis of the DNA samples to 2'-deoxynucleosides with the incorporation of NaBH(3)CN in the DNA hydrolysis buffer. The method required 50 microg of hydrolyzed DNA on column for the analysis, and the limit of detection for N(2)-ethyl-dG was 2.0 fmol. The analysis of calf thymus DNA treated in vitro with acetaldehyde (ranging from 0.5 to 100 mM) or with the smoke generated from 1, 5, and 10 cannabis cigarettes showed linear dose-dependent increases in the level of N(2)-ethyl-dG adducts (r = 0.954 and r = 0.999, respectively). Similar levels (332.8 +/- 21.9 vs 348.4 +/- 19.1 adducts per 10(8) 2'-deoxynucleosides) of N(2)-ethyl-dG adducts were detected following the exposure of calf thymus DNA to 10 tobacco or 10 cannabis cigarettes. No significant difference was found in the levels of N(2)-ethyl-dG adducts in human lung DNA obtained from nonsmokers (n = 4) and smokers (n = 4) with the average level observed as 13.3 +/- 0.7 adducts per 10(8) 2'-deoxynucleosides. No N(2)-ethyl-dG adducts were detected in any of the DNA samples following analysis with the omission of NaBH(3)CN from the DNA hydrolysis buffer. In conclusion, these results provide evidence for the DNA damaging potential of cannabis smoke, implying that the consumption of cannabis

  20. Neurotoxicological and thyroid evaluations of rats developmentally exposed to tris(1,3-dichloro-2-propyl)phosphate (TDICPP) and tris(2-chloro-2-ethyl)phosphate(TCEP)

    EPA Science Inventory

    ABSTRACT: Tris(1,3-dichloro-2-propyl)phosphate (TDICPP) and tris(2-chloro-2-ethyl)phosphate (TCEP) are organophosphorous flame retardants with widespread usage and human exposures through food, inhalation, and dust ingestion. They have been detected in human tissues including ur...

  1. 40 CFR 721.10665 - 2-Propenoic acid, (2-ethyl-2-methyl-1,3-dioxolan-4-yl)methyl ester.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10665 2-Propenoic acid, (2-ethyl-2-methyl-1,3-dioxolan-4-yl)methyl ester. (a) Chemical substance and significant new uses subject to reporting. (1)...

  2. 40 CFR 721.7700 - Poly(oxy-1,2-ethanediyl), α-hydro-ω-(oxiranylmethoxy)-, ether with 2-ethyl-2-(hydroxymethyl)-1,3...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Poly(oxy-1,2-ethanediyl), α-hydro-Ï-(oxiranylmethoxy)-, ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1). 721.7700 Section 721.7700 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL...

  3. 40 CFR 721.5500 - 7-Oxabicyclo[4.1.0]heptane, 3-ethenyl, homopolymer, ether with 2-ethyl-2-(hydroxymethyl)-1,3-pro...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false 7-Oxabicyclo heptane, 3-ethenyl, homopolymer, ether with 2-ethyl-2-(hydroxymethyl)-1,3-pro-pane-diol (3:1), epoxidized. 721.5500 Section 721.5500 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL...

  4. 40 CFR 721.7700 - Poly(oxy-1,2-ethanediyl), α-hydro-ω-(oxiranylmethoxy)-, ether with 2-ethyl-2-(hydroxymethyl)-1,3...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-(oxiranylmethoxy)-, ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1). 721.7700 Section 721.7700...-propanediol (3:1). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical...-(hydroxymethyl)-1,3-propanediol (3:1) (PMN P-88-2188) is subject to reporting under this section for...

  5. 40 CFR 721.7700 - Poly(oxy-1,2-ethanediyl), α-hydro-ω-(oxiranylmethoxy)-, ether with 2-ethyl-2-(hydroxymethyl)-1,3...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-(oxiranylmethoxy)-, ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1). 721.7700 Section 721.7700...-propanediol (3:1). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical...-(hydroxymethyl)-1,3-propanediol (3:1) (PMN P-88-2188) is subject to reporting under this section for...

  6. The effect of diesters and lauric acid on rheological properties of air/water interfaces stabilized by oligofructose lauric acid monoesters.

    PubMed

    van Kempen, Silvia E H J; Schols, Henk A; van der Linden, Erik; Sagis, Leonard M C

    2013-08-14

    In this study, the rheological properties of interfaces stabilized by oligofructose fatty acid esters were elucidated. First, the properties of interfaces stabilized by monoesters (ME), diesters (DE), lauric acid (LA), oligofructose (OF), and mixtures of ME with DE, LA, or OF were studied. Second, the properties of interfaces stabilized by the crude product (CP) containing ME, DE, LA, and OF were studied. The dependency of the dilatational modulus on frequency and deformation amplitude indicated the possible formation of a soft glass phase for ME, and a viscous interface for DE. When ME and DE were mixed at a ratio of 0.8/0.2, the experimental results suggest that the interfacial structure consists of islands of a glass phase formed by ME, dispersed in a 2D viscous phase of DE. CP stabilized interfaces, where the ratio ME/DE was higher, lead to a different rheological response. The ratio ME/DE plays an important role in the surface properties of the CP. This may have significant consequences for applications in macroscopic systems such as foams.

  7. Tuning the Surface of Nanoparticles: Impact of Poly(2-ethyl-2-oxazoline) on Protein Adsorption in Serum and Cellular Uptake.

    PubMed

    Koshkina, Olga; Westmeier, Dana; Lang, Thomas; Bantz, Christoph; Hahlbrock, Angelina; Würth, Christian; Resch-Genger, Ute; Braun, Ulrike; Thiermann, Raphael; Weise, Christoph; Eravci, Murat; Mohr, Benjamin; Schlaad, Helmut; Stauber, Roland H; Docter, Dominic; Bertin, Annabelle; Maskos, Michael

    2016-09-01

    Due to the adsorption of biomolecules, the control of the biodistribution of nanoparticles is still one of the major challenges of nanomedicine. Poly(2-ethyl-2-oxazoline) (PEtOx) for surface modification of nanoparticles is applied and both protein adsorption and cellular uptake of PEtOxylated nanoparticles versus nanoparticles coated with poly(ethylene glycol) (PEG) and non-coated positively and negatively charged nanoparticles are compared. Therefore, fluorescent poly(organosiloxane) nanoparticles of 15 nm radius are synthesized, which are used as a scaffold for surface modification in a grafting onto approach. With multi-angle dynamic light scattering, asymmetrical flow field-flow fractionation, gel electrophoresis, and liquid chromatography-mass spectrometry, it is demonstrated that protein adsorption on PEtOxylated nanoparticles is extremely low, similar as on PEGylated nanoparticles. Moreover, quantitative microscopy reveals that PEtOxylation significantly reduces the non-specific cellular uptake, particularly by macrophage-like cells. Collectively, studies demonstrate that PEtOx is a very effective alternative to PEG for stealth modification of the surface of nanoparticles.

  8. Development of a quantitative GC-FID method for the determination of sucrose mono- and diesters in foods.

    PubMed

    Cucu, Tatiana; De Meulenaer, Bruno

    2015-01-01

    Sucrose esters (E 473) are emulsifiers used in foods to improve different technological properties. They should conform to the specifications laid down in Commission Regulation No. 231/2012 and be used at amounts not exceeding the maximal ones set by Commission Regulation No. 1129/2011. In order to be able to characterise commercial sucrose ester formulations and to evaluate whether they are used correctly by the food industry, a quantitative GC-FID method was developed. Standards of monoesters and diesters were isolated from commercial additive preparations because no commercial ones were available. Commercial sucrose monolaureate and in-house-synthesised sucrose diarachidonate were used as internal standards. The method showed limits of detection and quantification of 2.9 and 5.7 µg ml(-1) respectively for the monoesters and 42.8 and 129.7 µg ml(-1) respectively for the diesters. The analysed commercial additive formulations contained mainly mono- and diesters of palmitic and stearic acid with low amounts of free fatty acid and sucrose. Different food matrices were incurred with commercial sucrose esters formulations and recoveries ranged between 92% and 118% for the monoesters and between 77% and 120% for the diesters. Recovery of sucrose monoesters in cake was around 34% when no enzymatic treatment was applied, and about 64% when enzymatic treatment with Clara-Diastase was applied. This indicated that sucrose esters can interact strongly with the matrix during food production and that treatment with enzymes is essential to determine the esters' content accurately in some classes of food products.

  9. Platelet-derived growth factor mimics phorbol diester action on epidermal growth factor receptor phosphorylation at threonine-654

    SciTech Connect

    Davis, R.J.; Czech, M.P.

    1985-06-01

    Addition of platelet-derived growth factor (PDGF) to quiescent WI-38 human fetal lung fibroblasts mimics the effect of tumor-promoting phorbol diesters to inhibit the high-affinity binding of SVI-labeled epidermal growth factor ( SVI-EGF). PDGF, like phorbol diesters, was found to increase the phosphorylation state of EGF receptors immunoprecipitated from intact fibroblasts that were labeled to equilibrium with (TSP)phosphate. Phosphoamino acid analysis of the EGF receptors indicated that both PDGF and phorbol diesters increased the level of (TSP)phosphoserine and (TSP)phosphothreonine. Phosphopeptide mapping of the EGF receptor demonstrated that PDGF increased the phosphorylation of several sites and induced the phosphorylation of a site that was not observed to be phosphorylated on EGF receptors isolated from control cells. This latter phosphorylation site on the EGF receptor was identified as threonine-654. These results are consistent with the hypothesis that increases in diacylglycerol and CaS levels caused by addition of PDGF to fibroblasts activate protein kinase C and that this kinase, at least in part, mediates the effect of PDGF on the phosphorylation of the EGF receptor. The data further suggest that protein kinase C may play an important role in the regulation of cellular metabolism and proliferation by PDGF.

  10. Determination of organophosphate diesters in urine samples by a high-sensitivity method based on ultra high pressure liquid chromatography-triple quadrupole-mass spectrometry.

    PubMed

    Su, Guanyong; Letcher, Robert J; Yu, Hongxia

    2015-12-24

    Organophosphate (OP) diesters in urine samples have potential use as biomarkers of organism exposure to environmentally relevant OP triester precursors and in particular OP triester flame retardants. This present study developed a quantitatively sensitive ultra high pressure liquid chromatography (UHPLC-MS) based method for urine and the determination of OP diesters (i.e. diphenyl phosphate (DPHP), bis(2-chloroethyl) phosphate (BCEP), bis(2-chloroisopropyl) phosphate (BDCIPP), di-n-butyl phosphate (DNBP), di(2-ethylhexyl) phosphate (DEHP), bis(1-chloro-2-propyl) phosphate (BCIPP), and bis(2-butoxyethyl) phosphate (BBOEP)). Fortified with the 7 OP diesters, 1mL of human urine sample was cleaned up using weak anion exchange solid phase extraction and eluted with high ionic strength ammonium acetate buffer. Subsequently, 4 non-chlorinated OP diesters were directly determined using UHPLC-electrospray(-)-triple quadrupole-MS (UHPLC-ESI(-)-QqQ-MS), and UHPLC-ESI(+)-QqQ-MS was used for determination of 3 chlorinated OP diesters after methylation using diazomethane. Recovery efficiencies of OP diesters ranged from 88 to 160% at three spiking levels (0.4, 2 and 10ng/mL urine). Matrix effects (MEs) and method limits of quantification (MLOQs) were 15-134% and 0.10-0.32ng/mL urine, respectively. Concentrations of OP diesters in n=12 urine samples (from 4 Canadian residents, 2014) varied as follows, nd-<0.28 (DNBP), nd-1.29 (DPHP), nd-<0.28 (DEHP), <0.16-12.33 (BCEP), nd-1.17 (BCDIPP) and nd-0.68ng/mL (BCIPP).

  11. La(III)-hydrogen peroxide cooperativity in phosphate diester cleavage. A mechanistic study

    SciTech Connect

    Takasaki, B.K.; Chin, J.

    1995-08-23

    La(III), Pr(III), Nd(III), and Eu(III) (2 mM) can each combine with hydrogen peroxide to provide close to 9 orders of magnitude rate acceleration for hydrolyzing BNPP (bis(p-nitrophenyl) phosphate) at pH 7 and 25{degree}C. The rate of the reaction is second order each in [(III)] and [H{sub 2}O{sub 2}], indicating that the active core 4 of the catalyst consists of two La(III) with two peroxides. The equilibrium constant for binding of BNPP to 4 (K{sub 1} = (1.3 {+-} 0.1) x 10{sup +3} M{sup -1}) and the rate constant for hydrolysis of the bound phosphate (k{sub 2} = (1.8 {+-} 0.1) x 10{sup -7} 5{sup -1}) have been determined. {sup 18}O labeling studies reveal that the peroxide is a nucleophilic catalyst in cleaving the diester. 17 refs., 5 figs., 1 tab.

  12. Disproportionation and nuclease activity of bis[2-ethyl-2-hydroxybutanoato(2-)]oxochromate(V) in neutral aqueous solutions.

    PubMed

    Levina, A; Lay, P A; Dixon, N E

    2000-02-07

    Complex 1, [Cr(V)O(ehba)2]- (ehba = 2-ethyl-2-hydroxybutanoate(2-)) is the most studied model compound of relevance to the biological activity of Cr(V) with regard to Cr-induced cancers. The first detailed kinetic study of disproportionation of 1 under neutral pH conditions (pH 6.0-8.0, [NaClO4] = 1.0 M, 37 degrees C) is reported. Kinetic data were collected by stopped-flow and conventional UV-vis spectroscopies and processed by the global analysis method. The disproportionation, which follows the stoichiometry 3Cr(V) --> 2Cr(VI) + Cr(III) (1), leads to release of 5 mol of H+/3 mol of Cr(V). Reaction 1 is accelerated by phosphate, but is not affected by acetate, HEPES, or Tris buffers. Initial rates of Cr(V) decay are directly proportional to [Cr(V)]0 (0.020-1.0 mM); they increase with an increase in the pH values and decrease in the presence of a large excess of ehba ligand. The first direct evidence for the formation of Cr(IV) intermediates in reaction 1 has been obtained; however, their UV-vis spectral properties were different from those of the well-characterized Cr(IV)-ehba complexes. The Cr(III) products of reaction I in phosphate buffers differ from those in the other buffers. A mechanism is proposed for reaction 1 on the basis of kinetic modeling. Influences of the reaction time and conditions on the extent of plasmid DNA cleavage induced by 1 have been studied under conditions corresponding to those of the kinetic studies. A comparison of the kinetic and DNA cleavage results has shown that direct interaction of 1 with the phosphate backbone of DNA is the most likely first step in the mechanism of DNA cleavage in neutral media. Small additions of Mn(II) ((0.01-0.1)[Cr(V)]0) did not affect the rate and stoichiometry of reaction 1, but suppressed the formation of Cr(IV) intermediates (presumably due to the catalysis of Cr(IV) disproportionation). However, much higher concentrations of Mn(II) ((0.1-1.0)[Cr(V)]0) were required to inhibit DNA cleavage induced by

  13. Analysis of phthalic acid diesters, monoester, and other plasticizers in polyvinyl chloride household products in Japan.

    PubMed

    Kawakami, Tsuyoshi; Isama, Kazuo; Matsuoka, Atsuko

    2011-01-01

    The aim of this study was to determine the concentrations of six phthalic acid diesters (PAEs) [di(2-ethylhexyl) phthalate (DEHP), di-n-butyl phthalate (DBP), butyl benzyl phthalate (BBP), diisononyl phthalate (DINP), di-n-octyl phthalate (DNOP), and diisodecyl phthalate (DIDP)], two non-phthalic plasticizers [di(2-ethylhexyl) adipate (DEHA), 2,2,4-trimethyl-1,3-pentanediol diisobutylate (TMPDIB)], and mono 2-ethylhexyl phthalate(MEHP) in polyvinyl chloride (PVC) household products that children often places in their mouths and/or contact with their skin (41 products, 47 samples) in Japan. The detection frequencies of the studied compounds were as follows: DEHP (79 %), DINP-2 (13 %), DINP-1 (11 %), DBP (8.5 %), DEHA (8.5 %), DIDP (4.3 %), and DNOP (2.1 %). Concentrations of these compounds ranged from 0.021 % to 48 %. BBP and TMPDIB were not detected in the all samples. Most samples contained DEHP and DINP at high concentrations over 0.1 %. High concentrations of PAEs were detected in PVC household products that appear appealing to children and can possibly be licked and chewed by them. Di(2-ethylhexyl) terephtalete, diisononyl 1,2-cyclohexanedicarboxylic acid, acetyl tributyl citrate, and di(2-ethylhexyl) 4-cyclohexene-1,2-dicarboxylate used as substitute plasticizers were also detected in several samples. MEHP was present in 70 % of the samples, with concentrations ranging from trace amounts to 140 μg/g. The ratios of MEHP against DEHP were 6.2 × 10(-4) to 1.6 × 10(-1) %. MEHP in the household products investigated in this study was most probably an impurity in DEHP. The high concentrations of PAEs detected in products that children often place in their mouth reveal the importance of replacing plasticizers in common household products, and not just children's toys, with safer alternatives.

  14. Separation of geometric isomers of native lutein diesters in marigold (Tagetes erecta L.) by high-performance liquid chromatography-mass spectrometry.

    PubMed

    Tsao, Rong; Yang, Raymond; Young, J Christopher; Zhu, Honghui; Manolis, Tony

    2004-08-06

    Lutein is found in many foods; the richest and purest plant source is marigold flower (Tagetes erecta L.). In this plant, lutein is in the form of saturated fatty acid diesters. By using a binary mobile phase consisting of ethyl acetate and acetonitrile-methanol (9:1), improved separation was achieved on a C18-bonded phase. The unique absorption of lutein cis isomers at 330nm was used in combination with MS to identify the novel cis-lutein isomeric dimyristate, myristate-palmitate, dipalmitate, and palmitate-stearate diesters, as well as the rare combinations of both trans- and cis-lutein laurate-palmitate and trans- and cis-lutein myristate-stearate. The presence of the all-trans-lutein laurate-myristate, dimyristate, myristate-palmitate, palmitate-stearate, and distearate diesters, reported by others, was also confirmed.

  15. Occurrence and distribution of organophosphate triesters and diesters in sludge from sewage treatment plants of Beijing, China.

    PubMed

    Gao, Lihong; Shi, Yali; Li, Wenhui; Liu, Jiemin; Cai, Yaqi

    2016-02-15

    The occurrence and distribution of 14 organophosphate (OP) triesters and 5 diesters were investigated in sludge from eight sewage treatment plants (STPs) in Beijing, China, during 2008-2014. Tri(2-ethylhexyl) phosphate (TEHP) and tri-m-cresyl phosphate (TCrP) were the predominant triesters with the average concentration of 233-137 μg/kg, respectively. Also, the polar and hydrophilic trimethyl phosphate (TMP) and triethyl phosphate (TEP) were detected in 19% and 74% of sludge samples, respectively. Three of five diesters were detected in sludge samples, and di(2-ethylhexyl) phosphate (DEHP) revealed the highest average concentration of 96.0 μg/kg, followed by diphenyl phosphate (DPhP, 18.0 μg/kg). The levels of OP triesters in sludge varied with the compositions of the sewage and treatment capacity of STPs, as well as the adjacent sources. In comparison with that in the former years, relatively higher concentration of total OP triesters in sludge was observed in 2014, which is consistent with the rapid growth in consumption of these chemicals in China. Finally, environmental risk assessment indicated potential harmful effects of OP triesters on soil microorganisms after sludge landfill or fertilization.

  16. Carnauba wax p-methoxycinnamic diesters: Characterisation, antioxidant activity and simulated gastrointestinal digestion followed by in vitro bioaccessibility.

    PubMed

    Freitas, Claisa Andréa Silva; Vieira, Ícaro Gusmão Pinto; Sousa, Paulo Henrique Machado; Muniz, Celli Rodrigues; Gonzaga, Maria Leônia da Costa; Guedes, Maria Izabel Florindo

    2016-04-01

    The beneficial biological effects of cinnamic acid derivatives and the lack of studies on the antioxidant activity and bioavailability of cinnamic esters from carnauba wax, diesters were extracted from carnauba wax powder. Their structural, physical and morphological characteristics, antioxidant activity and in vitro bioaccessibility were measured. p-Methoxycinnamic diester (PCO-C) was identified, which has a crystalline, apolar structure and exhibited significant antioxidant activity (107.27 ± 3.92 μM Trolox/g of dry weight) before and after simulated in vitro gastrointestinal digestion and 32.46% bioaccessibility. In human cells, PCO-C (250 μg/mL) inhibited the production of intracellular reactive oxygen species, with an effect similar to that of Trolox (80 μM). Thermogravimetric analysis showed that PCO-C had high thermal stability and high UV absorption between 250 and 350 nm. These results indicate that this compound is promising as an antioxidant for pharmaceutical and food industry applications, such as the development of active packaging and functional foods.

  17. One-dimensional Cu(I) and Ag(I) ladder-like coordination polymers supported by 2-ethyl-1-(pyridin-3-ylmethyl)-1H-benzimidazole.

    PubMed

    Gui, Liu-cheng; Liang, Guang-ming; Zou, Hua-hong; Hou, Zhong

    2013-09-01

    The title complexes, poly[[bis[μ2-2-ethyl-1-(pyridin-3-ylmethyl)-1H-benzimidazole-κ(2)N(1):N(3)]copper(I)] tetrafluoroborate acetonitrile monosolvate], {[Cu(C15H15N3)2]BF4·CH3CN}n, (I), and poly[[bis[μ2-2-ethyl-1-(pyridin-3-ylmethyl)-1H-benzimidazole-κ(2)N(1):N(3)]silver(I)] perchlorate methanol monosolvate], {[Ag(C15H15N3)2]ClO4·CH3OH}n, (II), are isostructural and exhibit one-dimensional ladder-like structures in which each asymmetric unit contains one metal ion (Cu(+) or Ag(+)), two 2-ethyl-1-(pyridin-3-ylmethyl)-1H-benzimidazole (bep) ligands, one counter-anion (tetrafluoroborate or perchlorate) and one interstitial molecule (acetonitrile or methanol). Each metal ion exhibits a distorted tetrahedral coordination geometry consisting of two pyridyl and two benzimidazole N atoms from four distinct ligands. Two metal ions are linked by two bep ligands to form a centrosymmetric 18-membered M2(bep)2 metallacycle, while adjacent M2(bep)2 metallacycles are further interlinked by another two bep ligands resulting in a ladder-like array. In the extended structure, four adjacent ladder-like arrays are connected together through C-H···F, O-H···O and C-H···O hydrogen bonds between bep ligands, solvent molecules and counter-anions into a three-dimensional supramolecular structure.

  18. Carrier transport and luminescence properties of nanocomposites of poly[2-methoxy-5-(2-ethyl hexyloxy)-p-phenylene vinylene] and dehydrated nanotubes titanic acid.

    PubMed

    Zhang, Ting; Xu, Zheng; Liu, Ran; Teng, Feng; Wang, Yongsheng; Xu, Xurong

    2007-12-01

    The carrier transport capability and luminescence efficiency of poly(2-methoxy-5-(2-ethyl hexyloxy)-p-phenylene vinylene) (MEH-PPV) films are enhanced by doping with dehydrated nanotubed titanic acid (DNTA). MEH-PPV molecules, either wrapped on the outer surface of or encapsulated into DNTA pores, have a more open, straighter conformation than undoped molecules, which induces a longer conjugated backbone and stronger interchain interactions, thereby, enhancing carrier mobility. MEH-PPV molecules within DNTA pores have higher exciton recombination efficiency owing to quantum confinement and the antenna effect.

  19. A mixture of five phthalate diesters cummulatively inhibit fetal testicular testoserone production in a manner consisent with their predicted reporduction toxicity in the Sprague Dawley rat.

    EPA Science Inventory

    Phthalate diesters are commonly-used plasticizers in intravenous bags, plastic food wrap and children’s toys, and the metabolites of multiple phthalates are detected in humans. In utero exposure to certain phthalates during sexual differentiation causes male reproductive tract m...

  20. Analysis of processing contaminants in edible oils. Part 2. Liquid chromatography-tandem mass spectrometry method for the direct detection of 3-monochloropropanediol and 2-monochloropropanediol diesters.

    PubMed

    MacMahon, Shaun; Begley, Timothy H; Diachenko, Gregory W

    2013-05-22

    A method was developed and validated for the detection of fatty acid diesters of 2-monochloropropanediol (2-MCPD) and 3-monochloropropanediol (3-MCPD) in edible oils. These analytes are potentially carcinogenic chemical contaminants formed during edible oil processing. After separation from oil matrices using a two-step solid-phase extraction (SPE) procedure, the target compounds are quantitated using liquid chromatography-tandem mass spectrometry (LC-MS/MS) with electrospray ionization (ESI). The first chromatographic conditions have been developed that separate intact diesters of 2-MCPD and 3-MCPD, allowing for their individual quantitation. The method has been validated for 28 3-MCPD diesters of lauric, myristic, palmitic, linolenic, linoleic, oleic, and stearic acids in coconut, olive, and palm oils, as well as 3 2-MCPD diesters, using an external calibration curve. The range of average recoveries and relative standard deviations (RSDs) across the three oil matrices at three spiking concentrations are 88-118% (2-16% RSD) with maximum limits of quantitation of 30 ng/g (ppb).

  1. pH Dependent Chiroptical Properties of (1R,2R)- and (1S,2S)-trans-Cyclohexane Diesters and Diamides from VCD, ECD, and CPL Spectroscopy.

    PubMed

    Mazzeo, Giuseppe; Abbate, Sergio; Longhi, Giovanna; Castiglioni, Ettore; Boiadjiev, Stefan E; Lightner, David A

    2016-03-10

    Diesters of (1R,2R)- and (1S,2S)-cyclohexanediols and diamides of (1R,2R)- and (1S,2S)-diaminocyclohexane with p-hydroxycinnamic acid have been known for some time to exhibit intense bisignate electronic circular dichroism (ECD) spectra in CH3OH. It was also known that added NaOH causes a bathochromic shift of ∼50 nm in CH3OH, and an even higher one in DMSO. We have measured vibrational circular dichroism (VCD) spectra both for neutral compounds and in the presence of NaOH and other bases. The VCD and IR spectra in the mid-IR region for CD3OD and DMSO-d6 solution exhibit high sensitivity to the charged state for the diesters. They possess two strong bisignate features in the presence of bases in the mid-IR, which are interpreted in terms of vibrational exciton couplets, while this phenomenon is less evident in diamides. VCD allied to density functional theory (DFT) calculations allows one to shed some light on the spectral differences of diesters and diamides by studying their conformational properties. Optical rotatory dispersion (ORD) curves confirm the ECD data. Circularly polarized luminescence (CPL) data have been also acquired, which are rather intense in basified solution: the CPL spectra are monosignate and are as intense in the diester and in the diamide case.

  2. Connection between the conformation and emission properties of poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] single molecules during thermal annealing

    NASA Astrophysics Data System (ADS)

    Ou, Jiemei; Yang, Yuzhao; Lin, Wensheng; Yuan, Zhongke; Gan, Lin; Lin, Xiaofeng; Chen, Xudong; Chen, Yujie

    2015-03-01

    We investigated the transitions of conformations and their effects on emission properties of poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) single molecules in PMMA matrix during thermal annealing process. Total internal reflection fluorescence microscopy measurements reveal the transformation from collapsed conformations to extended, highly ordered rod-like structures of MEH-PPV single molecules during thermal annealing. The blue shifts in the ensemble single molecule PL spectra support our hypnosis. The transition occurs as the annealing temperature exceeds 100 °C, implying that an annealing temperature near the glass transition temperature Tg of matrix is ideal for the control and optimization of blend polymer films.

  3. Drying temperature effects on electrical and optical properties of poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) thin film

    NASA Astrophysics Data System (ADS)

    Azhar, N. E. A.; Affendi, I. H. H.; Shafura, A. K.; Shariffudin, S. S.; Alrokayan, Salman A. H.; Khan, Haseeb A.; Rusop, M.

    2016-07-01

    Temperature effects on electrical and optical properties of a representative semiconducting polymer, poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV), has recently attracted much attention. The MEH-PPV thin films were deposited at different drying temperature (anneal temperature) using spin-coating technique. The spin coating technique was used to produce uniform film onto large area. The MEH-PPV was dissolved in toluene solution to exhibits different optical and electrical properties. The absorption coefficient and bandgap was measured using UV-Visible-NIR (UV-VIS-NIR). The bandgap of MEH-PPV was effect by the thickness of thin films. For electrical properties, two-point probe was used to characterize the current-voltage measurement. The current-voltage measurement shows that the MEH-PPV thin films become more conductive at high temperature. This study will provide better performance and suitable for optoelectronic device especially OLEDs applications.

  4. Synthesis and docking studies of new 1,4-dihydropyridines containing 4-(5)-Chloro-2-ethyl-5-(4)-imidazolyl substituent as novel calcium channel agonist.

    PubMed

    Davood, Asghar; Nematollahi, Ali Reza; Iman, Maryam; Shafiee, Abbas

    2009-04-01

    1,4-Dihydropyridines have been recognized as calcium channel agonist. Three new analogues of Bay K8644 in which the ortho trifluromethyl phenyl group at position 4 is replaced by the 4-(5)-Chloro-2-ethyl-5-(4)-imidazolyl substituent, were designed and synthesized as calcium channel agonist. For this propose, the structures of designed compounds were drawn by HYPERCHEM program. Conformations of the compounds were optimized through semi-empirical method followed by PM3 calculation. Then the crystalin stucture of L-type calcium channel was obtained from the Protein Data Bank (PDB) server. Docking calculations were carried out using Auto-Dock.4 program. The good interaction of our 1,4-DHP derivatives showed that they can be as possible calcium channel agonist agents. Finally compounds were synthesized according to a modified Hantzsch condensation procedure.

  5. Esters of pyromellitic acid. Part II. Esters of chiral alcohols: para pyromellitate diesters as a novel class of resolving agents and use of pyromellitates as duplicands for chiral purification.

    PubMed

    Paine, John B

    2008-07-04

    Methods are presented for the preparation of pyromellitate esters of chiral terpene alcohols, including d- (3) or l-menthol (4), d-isomenthol (7), l-borneol (8), or d- (5) or l-isopinocampheol (6). Alcoholysis of PMDA in CH2Cl2/Et3N led to the formation of monoesters (e.g., 18) or diesters (11, 12), as needed, relying on the differential reactivity of the two anhydride groups. The easily isolated para diester (11) crystallized before the meta diester (12) from HOAc. Nicotine (1, 14) was efficiently resolved as 1:1 salts with the menthyl (11a, 11b) or bornyl (11f) para diesters, prototypes of what promises to be a large class of novel resolving agents. Recrystallization of para-di-d-menthyl pyromellitate (11a) greatly improved the chiral purity of the contained d-menthol (3), an example of purification by "duplication". An alternative synthesis of specific diesters took advantage of the easily separated benzyl diesters and their derived acid chlorides (19, 21), with the benzyl esters serving as temporary blocking groups removable by catalytic hydrogenolysis. Pyromellitate tetraesters (26) were prepared by base-catalyzed transesterification of the tetraethyl ester (25). Tri- l-menthyl pyromellitate (27b) was obtained by catalytic hydrogenolysis of benzyl tri-l-menthyl pyromellitate (31b), itself prepared from the alcoholysis of benzyl pyromellitate triacid chloride (30) with l-menthol (4).

  6. Identification of 2-ethyl-4-methyl-3-thiazoline and 2-isopropyl-4-methyl-3-thiazoline for the first time in nature by the comprehensive analysis of sesame seed oil.

    PubMed

    Agyemang, David; Bardsley, Kathryn; Brown, Sharon; Kraut, Kenneth; Psota-Kelty, Linda; Trinnaman, Laurence

    2011-04-01

    Toasted sesame seed oil was comprehensively analyzed. It was extracted using the SAFE (Solvent-Assisted Flavor Evaporation) technique. The extract was analyzed by GC and GC-MS on 2 phases and a total of 87 components were identified, confirmed, and are presented in this paper. The major components were methylpyrazine; 2,5-dimethylpyrazine; 2,6-dimethylpyrazine; 2-ethyl-3,6-dimethylpyrazine; furfuryl alcohol; and guaiacol. In addition, as part of this analysis, 2-ethyl-4-methyl-3-thiazoline and 2-isopropyl-4-methyl-3-thiazoline were confirmed as being present in a natural product for the first time. Their identification, confirmation, and sensory evaluation have been documented here.

  7. Theoretical Proposal for the Whole Phosphate Diester Hydrolysis Mechanism Promoted by a Catalytic Promiscuous Dinuclear Copper(II) Complex.

    PubMed

    Esteves, Lucas F; Rey, Nicolás A; Dos Santos, Hélio F; Costa, Luiz Antônio S

    2016-03-21

    The catalytic mechanism that involves the cleavage of the phosphate diester model BDNPP (bis(2,4-dinitrophenyl) phosphate) catalyzed through a dinuclear copper complex is investigated in the current study. The metal complex was originally designed to catalyze catechol oxidation, and it showed an interesting catalytic promiscuity case in biomimetic systems. The current study investigates two different reaction mechanisms through quantum mechanics calculations in the gas phase, and it also includes the solvent effect through PCM (polarizable continuum model) single-point calculations using water as solvent. Two mechanisms are presented in order to fully describe the phosphate diester hydrolysis. Mechanism 1 is of the S(N)2 type, which involves the direct attack of the μ-OH bridge between the two copper(II) ions toward the phosphorus center, whereas mechanism 2 is the process in which hydrolysis takes place through proton transfer between the oxygen atom in the bridging hydroxo ligand and the other oxygen atom in the phosphate model. Actually, the present theoretical study shows two possible reaction paths in mechanism 1. Its first reaction path (p1) involves a proton transfer that occurs immediately after the hydrolytic cleavage, so that the proton transfer is the rate-determining step, which is followed by the entry of two water molecules. Its second reaction path (p2) consists of the entry of two water molecules right after the hydrolytic cleavage, but with no proton transfer; thus, hydrolytic cleavage is the rate-limiting step. The most likely catalytic path occurs in mechanism 1, following the second reaction path (p2), since it involves the lowest free energy activation barrier (ΔG(⧧) = 23.7 kcal mol(-1), in aqueous solution). A kinetic analysis showed that the experimental k(obs) value of 1.7 × 10(-5) s(-1) agrees with the calculated value k1 = 2.6 × 10(-5) s(-1); the concerted mechanism is kinetically favorable. The KIE (kinetic isotope effect) analysis

  8. Tumor-promoting phorbol diesters cause the phosphorylation of epidermal growth factor receptors in normal human fibroblasts at threonine-654.

    PubMed Central

    Davis, R J; Czech, M P

    1985-01-01

    The effect of tumor-promoting phorbol diesters to potentiate the action of epidermal growth factor (EGF) on cell proliferation is associated with phosphorylation of EGF receptors, acute depression of EGF binding, and inhibition of EGF receptor tyrosine kinase activity. In the present studies, normal human fibroblasts and A431 carcinoma cells were labeled with [32P]phosphate and treated with and without 10 nM 4 beta-phorbol 12 beta-myristate 13 alpha-acetate (PMA). The EGF receptors then were isolated by immunoprecipitation and digested with trypsin. Analysis of the labeled receptor phosphopeptides by reversed-phase HPLC revealed that PMA induces the phosphorylation of a unique phosphopeptide containing [32P]phosphothreonine. Comparison of several chemical and physical properties of the 32P-labeled phosphopeptide with the primary structure of the EGF receptor suggested the identify Lys-Arg-Thr(P)-Leu-Arg. This was confirmed by direct demonstration that a synthetic peptide of this structure comigrates during HPLC and electrophoresis with the 32P-labeled phosphopeptide isolated from the EGF receptors of normal human fibroblasts. The phosphorylated site on the peptide corresponds to threonine-654 of the EGF receptor, which is located on the cytoplasmic side of the plasma membrane nine residues distant from the transmembrane domain. These data indicate that phosphorylation of the EGF receptor in human fibroblasts and A431 cells at threonine-654 may regulate the EGF receptor tyrosine kinase activity and the binding of EGF. Images PMID:2984676

  9. Density functional study of the phosphate diester hydrolysis of RNA in RNA/DNA hybrid by RNase HI

    NASA Astrophysics Data System (ADS)

    Kita, Makoto; Nakamura, Haruki; Takano, Yu

    2014-02-01

    Ribonuclease HI (RNase HI) catalyses the non-specific hydrolysis of RNA in an RNA/DNA hybrid. This enzyme is found in almost all organisms and involved in replication initiation and DNA topology restoration. A similar fold has been observed in other enzymes such as DNA transposases. In particular, RNases HI has emerged as important therapeutic targets because the enzymatic activity is absolutely required for proliferation of HIV and other retroviruses. The X-ray crystallographic structures of RNase HI revealed that the Mg2+ ion is essential for the enzymatic reaction and that Asp and Glu coordinate to the Mg2+ ion. There are, however, controversies about the catalytic mechanism of RNase HI, the number of Mg2+ ions, the proton transfer pathway, and the protonation states of the active site residues. In the present study, we have explored the hydrolysis of the phosphate diester group of RNA by RNase HI using density functional theory to elucidate how many Mg2+ ions are required for the catalysis of RNase HI. Our computation demonstrates that both one- and two-metal models show the stepwise hydrolysis pathway via a pentacovalent intermediate. However, the activation barrier of the two-metal model is lower than that of the one-metal model by 11.7 kcal/mol.

  10. Rapid hydrolysis of model phosphate diesters by alkaline-earth cations in aqueous DMSO: speciation and kinetics.

    PubMed

    Taran, Olga; Medrano, Felipe; Yatsimirsky, Anatoly K

    2008-12-14

    Kinetics of the cleavage of two phosphate diesters, bis(4-nitrophenyl) phosphate and 2-hydroxypropyl 4-nitrophenyl phosphate and a triester, 4-nitrophenyl diphenyl phosphate, in the presence of Mg(II), Ca(II) and Sr(II) were studied in 90% vol. DMSO at 37 degrees C. The alkaline hydrolysis of the triester was inhibited by all cations, but with both phosphodiesters strong catalytic effects were observed. Potentiometric titrations of metal perchlorates by Bu4N(OH) revealed formation of M2(OH)3+, M(OH)+, M(OH)2 and M2(OH)5- species. Rate constants for phosphodiester cleavage by individual species were obtained from analysis of rate-concentration profiles. Observed first-order rate constants in the presence of 1-2 mM Mg(II) or Ca(II) in neutral and weakly basic solutions were 10(8)-10(11) times higher than those for background hydrolysis at the same pH while in water additions of up to 50 mM metal produced <100-fold accelerations. Possible structures of DMSO solvated catalyst-substrate complexes were modeled by DFT calculations with Mg(II). The increased catalytic activity in 90% DMSO is attributed to stronger association of hydroxide ions and anionic phosphodiesters with metal ions and to preferable solvation of cations by DMSO, which creates favorable for reaction anhydrous microenvironment in the coordination sphere of the catalyst.

  11. Separation of N2-ethyl-2'-deoxyguanosine-5'-monophosphate and four native deoxyribonucleoside monophosphates using capillary zone electrophoresis with polyethylene glycol as buffer additive.

    PubMed

    Esaka, Y; Inagaki, S; Goto, M; Sako, M

    2001-01-01

    We investigated the separation of five deoxyribonucleoside monophosphates: 2'-deoxyguanosine-5'-monophosphate (dGMP), 2'-deoxyadenosine-5'-monophosphate (dAMP), 2'-deoxycytosine-5'-monophosphate (dCMP), 2'-deoxythymidine-5'-monophosphate (dTMP) and a dGMP adduct possessing N2-ethyl-guanine, which has been noted in relation to mutagenesis of alcohol, using capillary zone electrophoresis (CZE). The concentration of polyethylene glycol (PEG) as a modifier and the pH of the running solutions can efficiently control the observed separation. Interaction of PEG with analytes was quantitatively evaluated. PEG worked effectively as a hydrophobic selector in these separations. The values of pKa of the acidic-NH-groups in the base moieties of dGMP, dTMP, and the dGMP adduct are close to that of boric acid used as buffer of the running solutions. The control of their charge was facilitated, enabling improved separations. A more sufficient and fast separation was achieved by both optimization of pH of the running solutions and PEG concentration compared with that obtained by pH control alone. On-line concentration using a stacking method followed by the PEG-assisted CZE was briefly studied.

  12. Spectrophotometric determination of boron in iron and steel with curcumin after separation by 2-ethyl-1,3-hexanediol-chloroform extraction.

    PubMed

    Donaldson, E M

    1981-11-01

    A simple and reliable method for determining approximately 0.0001% or more of total boron in iron and low- and high-alloy steels is described. After the sample is decomposed at <70 degrees in the presence of hydrogen peroxide and potassium hydrogen fluoride, the insoluble material is filtered off and ultimately fused with sodium carbonate. The cooled melt is dissolved in dilute hydrochloric acid and the solution is combined with the main solution. Fluoride is subsequently complexed with zirconium and boron is separated from iron and other elements by extraction as borate from 1M sulphuric acid medium into chloroform containing 2-ethyl-1,3-hexanediol. Boron, in a 1-ml portion of the extract, is ultimately determined spectrophotometrically at 550 nm in an ethanol medium, after formation of the curcumin rosocyanin complex in a glacial acetic acid-concentrated sulphuric acid medium. Acid-soluble and acid-insoluble boron can also be determined. Common ions, including large amounts of manganese, chromium, vanadium, titanium, molybdenum, tungsten, niobium and tantalum do not interfere.

  13. Improvement in enzyme activity and stability by addition of low molecular weight polyethylene glycol to sodium bis(2-ethyl-L-hexyl)sulfosuccinate/isooctane reverse micellar system.

    PubMed

    Talukder, M M R; Takeyama, T; Hayashi, Y; Wu, J C; Kawanishi, T; Shimizu, N; Ogino, C

    2003-08-01

    The activity and stability of Chromobacterium viscosum lipase (glycerolester hydrolase, EC 3.1.1.3)-catalyzed olive oil hydrolysis in sodium bis (2-ethyl-l-hexyl)sulfosuccinate (AOT)/isooctane reverse micelles is increased appreciably when low molecular weight polyethylene glycol (PEG 400) is added to the reverse micelles. To understand the effect of PEG 400 on the phase behavior of the reverse micellar system, the phase diagram of AOT/ PEG 400/water/isooctane system was studied. The influences of relevant parameters on the catalytic activity in AOT/PEG 400 reverse micelles were investigated and compared with the results in the simple AOT reverse micelles. In the presence of PEG 400, the linear decreasing trend of the lipase activity with AOT concentration, which is observed in the simple AOT reverse micelles, disappeared. Enzyme entrapped in AOT/PEG reverse micelles was very stable, retaining >75% of its initial activity after 60 d, whereas the half-life in simple AOT reverse micelles was 38 d. The kinetics parameter maximum velocity (Vmax) exhibiting the temperature dependence and the activation energy obtained by Arrhenius plot was suppressed significantly by the addition of PEG 400.

  14. Inverted polymer fullerene solar cells exceeding 10% efficiency with poly(2-ethyl-2-oxazoline) nanodots on electron-collecting buffer layers.

    PubMed

    Nam, Sungho; Seo, Jooyeok; Woo, Sungho; Kim, Wook Hyun; Kim, Hwajeong; Bradley, Donal D C; Kim, Youngkyoo

    2015-12-14

    Polymer solar cells have been spotlighted due to their potential for low-cost manufacturing but their efficiency is still less than required for commercial application as lightweight/flexible modules. Forming a dipole layer at the electron-collecting interface has been suggested as one of the more attractive approaches for efficiency enhancement. However, only a few dipole layer material types have been reported so far, including only one non-ionic (charge neutral) polymer. Here we show that a further neutral polymer, namely poly(2-ethyl-2-oxazoline) (PEOz) can be successfully used as a dipole layer. Inclusion of a PEOz layer, in particular with a nanodot morphology, increases the effective work function at the electron-collecting interface within inverted solar cells and thermal annealing of PEOz layer leads to a state-of-the-art 10.74% efficiency for single-stack bulk heterojunction blend structures comprising poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene-alt-3-fluorothieno[3,4-b]thiophene-2-carboxylate] as donor and [6,6]-phenyl-C71-butyric acid methyl ester as acceptor.

  15. Ionizing radiation induced degradation of poly (2-methoxy-5-(2'-ethyl-hexyloxy) -1,4-phenylene vinylene) in solution

    NASA Astrophysics Data System (ADS)

    Bronze-Uhle, E. S.; Batagin-Neto, A.; Lavarda, F. C.; Graeff, C. F. O.

    2011-10-01

    In this paper we investigate the causes of the chromatic alteration observed in chloroform solutions of poly (2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) after gamma ray irradiation. Structural and chemical changes were analyzed by gel permeation chromatography, fourier transform infrared spectroscopy, and proton nuclear magnetic resonance techniques and complemented by electronic structure calculations. The results indicate chlorine incorporation in the polymer structure and main chain scission after irradiation. Based on our findings we propose that the main mechanism for the blue-shifts, observed in the UV-Vis absorption spectra of MEH-PPV after irradiation, is the result of a radical attack on the polymer main chain. Gamma rays generate radicals, •Cl and •CHCl2 from chloroform radiolysis that attack preferentially the vinyl double bonds of the polymer backbone, breaking the electronic conjugation and eventually the chain. Our results indicate that oxygen does not play a major role in the effect. Electronic spectra simulations were performed based on these assumptions reproducing the UV-Vis experimental results.

  16. Ionizing radiation induced degradation of poly (2-methoxy-5-(2'-ethyl-hexyloxy) -1,4-phenylene vinylene) in solution

    SciTech Connect

    Bronze-Uhle, E. S.; Batagin-Neto, A.; Lavarda, F. C.; Graeff, C. F. O.

    2011-10-01

    In this paper we investigate the causes of the chromatic alteration observed in chloroform solutions of poly (2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) after gamma ray irradiation. Structural and chemical changes were analyzed by gel permeation chromatography, fourier transform infrared spectroscopy, and proton nuclear magnetic resonance techniques and complemented by electronic structure calculations. The results indicate chlorine incorporation in the polymer structure and main chain scission after irradiation. Based on our findings we propose that the main mechanism for the blue-shifts, observed in the UV-Vis absorption spectra of MEH-PPV after irradiation, is the result of a radical attack on the polymer main chain. Gamma rays generate radicals, Cl and CHCl{sub 2} from chloroform radiolysis that attack preferentially the vinyl double bonds of the polymer backbone, breaking the electronic conjugation and eventually the chain. Our results indicate that oxygen does not play a major role in the effect. Electronic spectra simulations were performed based on these assumptions reproducing the UV-Vis experimental results.

  17. Design, Synthesis and Anti-Tubercular Activity of Novel 1, 4-Dihydropyrine-3, 5-Dicarboxamide Containing 4(5)-Chloro-2-Ethyl- 5(4)-Imidazolyl Moiety

    PubMed Central

    Iman, Maryam; Davood, Asghar; Lotfinia, Mahboubeh; Dehqani, Golnoush; Sardari, Soroush; Azerang, Parisa; Amini, Mohsen

    2016-01-01

    Current researches have showed that N3, N5-diaryl-2, 6-dimethyl -1, 4-dihydropyrine-3, 5- dicarboxamide analogues demonstrate notable anti-tubercular activity. In this study, Hantzsch condensation was used to design and synthesize new analogues of dihydropyridine (DHP). Different diary carboxamides were inserted at positions 3 and 5 of the DHP ring. 4(5)-chloro-2-ethyl-5(4)-imidazolyl moiety was considered at position 4 of the DHP ring. The structures of prepared ligands were characterized using TLC followed by FT-IR, elemental analysis, Mass and proton NMR. Results of anti-tubercular activity have indicated all the prepared ligands 3a-f inhibit the mycobacterium tuberculosis growth and the most potent compounds were 3c (3,4-Cl) and 3b (4-Cl). The in-vitro obtained data are agreement with our computational predictions in terms of partial atomic charge of carbonyl moieties at the positions 3 and 5 of dihydropyridine ring and the logP of the molecules. PMID:28243275

  18. Inverted polymer fullerene solar cells exceeding 10% efficiency with poly(2-ethyl-2-oxazoline) nanodots on electron-collecting buffer layers

    PubMed Central

    Nam, Sungho; Seo, Jooyeok; Woo, Sungho; Kim, Wook Hyun; Kim, Hwajeong; Bradley, Donal D. C.; Kim, Youngkyoo

    2015-01-01

    Polymer solar cells have been spotlighted due to their potential for low-cost manufacturing but their efficiency is still less than required for commercial application as lightweight/flexible modules. Forming a dipole layer at the electron-collecting interface has been suggested as one of the more attractive approaches for efficiency enhancement. However, only a few dipole layer material types have been reported so far, including only one non-ionic (charge neutral) polymer. Here we show that a further neutral polymer, namely poly(2-ethyl-2-oxazoline) (PEOz) can be successfully used as a dipole layer. Inclusion of a PEOz layer, in particular with a nanodot morphology, increases the effective work function at the electron-collecting interface within inverted solar cells and thermal annealing of PEOz layer leads to a state-of-the-art 10.74% efficiency for single-stack bulk heterojunction blend structures comprising poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b′]dithiophene-alt-3-fluorothieno[3,4-b]thiophene-2-carboxylate] as donor and [6,6]-phenyl-C71-butyric acid methyl ester as acceptor. PMID:26656447

  19. Spectroscopic (FT-IR and UV-Vis) and theoretical (HF and DFT) investigation of 2-Ethyl-N-[(5-nitrothiophene-2-yl)methylidene]aniline

    NASA Astrophysics Data System (ADS)

    Ceylan, Ümit; Tarı, Gonca Özdemir; Gökce, Halil; Ağar, Erbil

    2016-04-01

    Crystal structure of the title compound, 2-Ethyl-N-[(5-nitrothiophene-2-yl)methylidene]aniline, C13H12N2O2S, has been synthesized and characterized by FT-IR and UV-Vis spectrum. The compound crystallized in the monoclinic space group P 21/c with a = 11.3578 (4) Å, b = 7.4923 (2) Å, c = 14.9676 (6) Å and β = 99.589 (3)° and Z = 4 in the unit cell. The molecular geometry was also calculated using the Gaussian 03 software and structure was optimized using the HF and DFT/B3LYP methods with the 6-311++G(d,p) basis set in ground state. Using the TD-DFT method, the electronic absorption spectra of the title compound was computed in both the gas phase and ethanol solvent. The harmonic vibrational frequencies of the title compound were calculated using the same methods with the 6-311++G(d,p) basis set. The calculated results were compared with the experimental determination results of the compound. It was seen that the optimized structure was in excellent agreement with the X-ray crystal structure. The energetic behaviors of the title compound in solvent media were examined using the HF and DFT/B3LYP methods with the 6-311++G(d,p) basis set applying the polarizable continuum model (PCM). In addition, the molecular orbitals (FMOs) analysis, molecular electrostatic potential (MEP), nonlinear optical and thermodynamic properties of the title compound were performed using the same methods with the 6-311++G(d,p) basis set.

  20. Anxiolytic- and antidepressant-like effects of the methadone metabolite 2-ethyl-5-methyl-3,3-diphenyl-1-pyrroline (EMDP).

    PubMed

    Forcelli, Patrick A; Turner, Jill R; Lee, Bridgin G; Olson, Thao T; Xie, Teresa; Xiao, Yingxian; Blendy, Julie A; Kellar, Kenneth J

    2016-02-01

    The enhancement of GABAergic and monoaminergic neurotransmission has been the mainstay of pharmacotherapy and the focus of drug-discovery for anxiety and depressive disorders for several decades. However, the significant limitations of drugs used for these disorders underscores the need for novel therapeutic targets. Neuronal nicotinic acetylcholine receptors (nAChRs) may represent one such target. For example, mecamylamine, a non-competitive antagonist of nAChRs, displays positive effects in preclinical tests for anxiolytic and antidepressant activity in rodents. In addition, nicotine elicits similar effects in rodent models, possibly by receptor desensitization. Previous studies (Xiao et al., 2001) have identified two metabolites of methadone, EMDP (2-ethyl-5-methyl-3,3-diphenyl-1-pyrroline) and EDDP (2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine), which are considered to be inactive at opiate receptors, as relatively potent noncompetitive channel blockers of rat α3β4 nAChRs. Here, we show that these compounds are likewise highly effective blockers of human α3β4 and α4β2 nAChRs. Moreover, we show that they display relatively low affinity for opiate binding sites labeled by [(3)H]-naloxone. We then evaluated these compounds in rats and mice in preclinical behavioral models predictive of potential anxiolytic and antidepressant efficacy. We found that EMDP, but not EDDP, displayed robust effects predictive of anxiolytic and antidepressant efficacy without significant effects on locomotor activity. Moreover, EMDP at behaviorally active doses, unlike mecamylamine, did not produce eyelid ptosis, suggesting it may produce fewer autonomic side effects than mecamylamine. Thus, the methadone metabolite EMDP may represent a novel therapeutic avenue for the treatment of some affective disorders.

  1. Anxiolytic- and Antidepressant-like Effects of the Methadone Metabolite 2-ethyl-5-methyl-3,3-diphenyl-1-pyrroline (EMDP)

    PubMed Central

    Lee, Bridgin G.; Olson, Thao T.; Xie, Teresa; Xiao, Yingxian; Blendy, Julie A.; Kellar, Kenneth J.

    2015-01-01

    The enhancement of GABAergic and monoaminergic neurotransmission has been the mainstay of pharmacotherapy and the focus of drug-discovery for anxiety and depressive disorders for several decades. However, the significant limitations of drugs used for these disorders underscores the need for novel therapeutic targets. Neuronal nicotinic acetylcholine receptors (nAChRs) may represent one such target. For example, mecamylamine, a non-competitive antagonist of nAChRs, displays positive effects in preclinical tests for anxiolytic and antidepressant activity in rodents. In addition, nicotine elicits similar effects in rodent models, possibly by receptor desensitization. Previous studies (Xiao et al., 2001) have identified two metabolites of methadone, EMDP (2-ethyl-5-methyl-3,3-diphenyl-1-pyrroline) and EDDP (2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine), which are considered to be inactive at opiate receptors, as relatively potent noncompetitive channel blockers of rat α3β4 nAChRs. Here, we show that these compounds are likewise highly effective blockers of human α3β4 and α4β2 nAChRs. Moreover, we show that they display relatively low affinity for opiate binding sites labeled by [3H]-naloxone. We then evaluated these compounds in rats and mice in preclinical behavioral models predictive of potential anxiolytic and antidepressant efficacy. We found that EMDP, but not EDDP, displayed robust effects predictive of anxiolytic and antidepressant efficacy without significant effects on locomotor activity. Moreover, EMDP at behaviorally active doses, unlike mecamylamine, did not produce eyelid ptosis, suggesting it may produce fewer autonomic side effects than mecamylamine. Thus, the methadone metabolite EMDP may represent a novel therapeutic avenue for the treatment of some affective disorders. PMID:26365569

  2. Neurotoxicological and thyroid evaluations of rats developmentally exposed to tris(1,3-dichloro-2-propyl)phosphate (TDCIPP) and tris(2-chloro-2-ethyl)phosphate (TCEP).

    PubMed

    Moser, Virginia C; Phillips, Pamela M; Hedge, Joan M; McDaniel, Katherine L

    2015-01-01

    Tris(1,3-dichloro-2-propyl)phosphate (TDCIPP) and tris(2-chloro-2-ethyl)phosphate (TCEP) are organophosphorous flame retardants with widespread usage and human exposures through food, inhalation, and dust ingestion. They have been detected in human tissues including urine and breast milk. Reports of disrupted neural growth in vitro, abnormal development in larval zebrafish, and altered thyroid hormones in several species have raised concern for neurodevelopmental toxicity. This is especially the case for TDCIPP, which is more potent and has more activity in those assays than does TCEP. We evaluated the potential for developmental neurotoxicity of TDCIPP and TCEP in a mammalian model. Pregnant Long-Evans rats were administered TDCIPP (15, 50, or 150 mg/kg/day) or TCEP (12, 40, 90 mg/kg/day) via oral gavage from gestational day 10 to weaning. Corn oil was the vehicle control in both studies. Body weight and righting reflex development were monitored in all pups. A subset of offspring at culling and weaning, and dams at weaning, were sacrificed for serum and organ collection for measurement of brain, liver, and thyroid weights, serum thyroid levels, and serum and brain acetylcholinesterase activities. Brain weights were also measured in a group of adult TDCIPP-treated offspring. One male and one female from each litter were allocated for behavioral testing at several ages: standard locomotor activity (preweaning, postweaning, adults), locomotor activity including a lighting change mid-way (postweaning, adults), elevated zero maze (postweaning, adults), functional observational battery (FOB; postweaning, adults), and Morris water maze (place learning, reference and working memory; adults). Neither chemical produced changes in maternal body weight or serum thyroid hormones, but relative liver weight was increased at the high doses of both TDCIPP and TCEP. In offspring, there were no effects on viability, litter size, or birth weight. With TDCIPP, absolute liver weights

  3. Trehalose diester glycolipids are superior to the monoesters in binding to Mincle, activation of macrophages in vitro and adjuvant activity in vivo

    PubMed Central

    Huber, Alexandra; Kallerup, Rie S; Korsholm, Karen S; Franzyk, Henrik; Lepenies, Bernd; Christensen, Dennis

    2016-01-01

    The T-cell adjuvanticity of mycobacterial cord factor trehalose 6,6'-dimycolate (TDM) is well established. The identification of the C-type lectin Mincle on innate immune cells as the receptor for TDM and its synthetic analogue trehalose 6,6'-dibehenate (TDB) has raised interest in development of synthetic Mincle ligands as novel adjuvants. Trehalose mono- (TMXs) and diesters (TDXs) with symmetrically shortened acyl chains [denoted by X: arachidate (A), stearate (S), palmitate (P), and myristate (M)] were tested. Upon stimulation of murine macrophages, G-CSF secretion and NO production were strongly augmented by all TDXs tested, in a wide concentration range. In contrast, the TMXs triggered macrophage activation only at high concentrations. Macrophage activation by all TDXs required Mincle, but was independent of MyD88. The superior capacity of TDXs for activating macrophages was paralleled by direct binding of TDXs, but not of TMXs, to a Mincle-Fc fusion protein. Insertion of a short polyethylene glycol between the sugar and acyl chain in TDS reduced Mincle-binding and macrophage activation. Immunization of mice with cationic liposomes containing the analogues demonstrated the superior adjuvant activity of trehalose diesters. Overall, immune activation in vitro and in vivo by trehalose esters of simple fatty acids requires two acyl chains of length and involves Mincle. PMID:27252171

  4. Determination of polyfluoroalkyl phosphoric acid diesters, perfluoroalkyl phosphonic acids, perfluoroalkyl phosphinic acids, perfluoroalkyl carboxylic acids, and perfluoroalkane sulfonic acids in lake trout from the Great Lakes region.

    PubMed

    Guo, Rui; Reiner, Eric J; Bhavsar, Satyendra P; Helm, Paul A; Mabury, Scott A; Braekevelt, Eric; Tittlemier, Sheryl A

    2012-11-01

    A comprehensive method to extract perfluoroalkyl carboxylic acids, perfluoroalkane sulfonic acids, perfluoroalkyl phosphonic acids, perfluoroalkyl phosphinic acids, and polyfluoroalkyl phosphoric acid diesters simultaneously from fish samples has been developed. The recoveries of target compounds ranged from 78 % to 121 %. The new method was used to analyze lake trout (Salvelinus namaycush) from the Great Lakes region. The results showed that the total perfluoroalkane sulfonate concentrations ranged from 0.1 to 145 ng/g (wet weight) with perfluorooctane sulfonate (PFOS) as the dominant contaminant. Concentrations in fish between lakes were in the order of Lakes Ontario ≈ Erie > Huron > Superior ≈ Nipigon. The total perfluoroalkyl carboxylic acid concentrations ranged from 0.2 to 18.2 ng/g wet weight. The aggregate mean perfluorooctanoic acid (PFOA) concentration in fish across all lakes was 0.045 ± 0.023 ng/g. Mean concentrations of PFOA were not significantly different (p > 0.1) among the five lakes. Perfluoroalkyl phosphinic acids were detected in lake trout from Lake Ontario, Lake Erie, and Lake Huron with concentration ranging from non-detect (ND) to 0.032 ng/g. Polyfluoroalkyl phosphoric acid diesters were detected only in lake trout from Lake Huron, at levels similar to perfluorooctanoic acid.

  5. QM/MM analysis suggests that Alkaline Phosphatase (AP) and Nucleotide pyrophosphatase/phosphodiesterase slightly tighten the transition state for phosphate diester hydrolysis relative to solution: implication for catalytic promiscuity in the AP superfamily

    PubMed Central

    Hou, Guanhua

    2011-01-01

    Several members of the Alkaline Phosphatase (AP) superfamily exhibit a high level of catalytic proficiency and promiscuity in structurally similar active sites. A thorough characterization of the nature of transition state for different substrates in these enzymes is crucial for understanding the molecular mechanisms that govern those remarkable catalytic properties. In this work, we study the hydrolysis of a phosphate diester, MpNPP−, in solution, two experimentally well-characterized variants of AP (R166S AP, R166S/E322Y AP) and wild type Nucleotide pyrophosphatase/phosphodiesterase (NPP) by QM/MM calculations in which the QM method is an approximate density functional theory previously parameterized for phosphate hydrolysis (SCC-DFTBPR). The general agreements found between these calculations and available experimental data for both solution and enzymes support the use of SCC-DFTBPR/MM for a semi-quantitative analysis of the catalytic mechanism and nature of transition state in AP and NPP. Although phosphate diesters are cognate substrates for NPP but promiscuous substrates for AP, the calculations suggest that their hydrolysis reactions catalyzed by AP and NPP feature similar synchronous transition states that are slightly tighter in nature compared to that in solution, due in part to the geometry of the bimetallic zinc motif. Therefore, this study provides the first direct computational support to the hypothesis that enzymes in the AP superfamily catalyze cognate and promiscuous substrates via similar transition states to those in solution. Our calculations do not support the finding of recent QM/MM studies by López-Canut and coworkers, who suggested that the same diester substrate goes through a much looser transition state in NPP/AP than in solution, a result likely biased by the large structural distortion of the bimetallic zinc site in their simulations. Finally, our calculations for different phosphate diester orientations and phosphorothioate diesters

  6. QM/MM analysis suggests that Alkaline Phosphatase (AP) and nucleotide pyrophosphatase/phosphodiesterase slightly tighten the transition state for phosphate diester hydrolysis relative to solution: implication for catalytic promiscuity in the AP superfamily.

    PubMed

    Hou, Guanhua; Cui, Qiang

    2012-01-11

    Several members of the Alkaline Phosphatase (AP) superfamily exhibit a high level of catalytic proffciency and promiscuity in structurally similar active sites. A thorough characterization of the nature of transition state for different substrates in these enzymes is crucial for understanding the molecular mechanisms that govern those remarkable catalytic properties. In this work, we study the hydrolysis of a phosphate diester, MpNPP(-), in solution, two experimentally well-characterized variants of AP (R166S AP, R166S/E322Y AP) and wild type Nucleotide pyrophosphatase/phosphodiesterase (NPP) by QM/MM calculations in which the QM method is an approximate density functional theory previously parametrized for phosphate hydrolysis (SCC-DFTBPR). The general agreements found between these calculations and available experimental data for both solution and enzymes support the use of SCC-DFTBPR/MM for a semiquantitative analysis of the catalytic mechanism and nature of transition state in AP and NPP. Although phosphate diesters are cognate substrates for NPP but promiscuous substrates for AP, the calculations suggest that their hydrolysis reactions catalyzed by AP and NPP feature similar synchronous transition states that are slightly tighter in nature compared to that in solution, due in part to the geometry of the bimetallic zinc motif. Therefore, this study provides the first direct computational support to the hypothesis that enzymes in the AP superfamily catalyze cognate and promiscuous substrates via similar transition states to those in solution. Our calculations do not support the finding of recent QM/MM studies by López-Canut and co-workers, who suggested that the same diester substrate goes through a much looser transition state in NPP/AP than in solution, a result likely biased by the large structural distortion of the bimetallic zinc site in their simulations. Finally, our calculations for different phosphate diester orientations and phosphorothioate diesters

  7. Electrophoretic separation of alginic sodium diester and sodium hexametaphosphate in chondroitin sulfate that interfere with the cetylpyridinium chloride titration assay.

    PubMed

    Weiguo, Zhang; Giancaspro, Gabriel; Adams, Kristie M; Neal-Kababick, James; Hildreth, Jana; Li, Aishan; Roman, Mark C; Betz, Joseph M

    2014-01-01

    The most commonly used chondroitin sulfate (CS) assay method is cetylpyridinium chloride (CPC) titration. Cellulose acetate membrane electrophoresis (CAME) is the technique used for detection of impurities in the U.S. Pharmacopeia's CS monograph. Because CPC titration is a relatively nonspecific quantitative technique, the apparent amount of CS as determined by CPC titration alone may not reflect the true amount of CS due to possible interference with the CPC assay by impurities that contain CPC titratable functional groups. When CAME is used in conjunction with CPC titration, certain non-CS and adulterants can be visualized and estimated, and a true value for CS can be assigned once the presence of these non-CS impurities has been ruled out. This study examines conjunct application of CPC and CAME in ascertaining CS assay and purity in the presence of certain adulterants. These include propylene glycol alginate sulfate sodium, known in commerce as alginic sodium diester (ASD), and Zero One (Z1), a water-soluble agent newly reported in the CS marketplace and subsequently identified as sodium hexametaphosphate. ASD, Z1, and CS are similar in physical appearance and solubility in water and ethanol. They are also titratable anions and form ionic pairs with CPC, therefore interfering with the CPC titration assay for CS CAME separates these adulterants from each other and from CS by differences in their electrophoretic mobility. CAME is able to detect these impurities in CS at levels as low as 0.66% by weight. Although it is recommended that a method for detecting impurities (e.g., CAME) be used in cormbination with relatively nonspecific assay methods such as CPC titration, this is seldom done in practice. Assay results for CS derived fromn CPC titration may, therefore, be misleading, leaving the CS supply chain vulnerable to adulteration. In this study, the authors investigated ASD and Z1 adulteration of CS and developed an electrophoretic separation of these

  8. Diester-containing Zwitterionic Gemini Surfactants with Different Spacer and Its Impact on Micellization Properties and Viscosity of Aqueous Micellar Solution.

    PubMed

    Patil, Sachin Vasant; Patil, Sanyukta Arun; Pratap, Amit Prabhakar

    2016-09-01

    A series of diester containing zwitterionic gemini surfactants, N,N-dimethyl-N-alkyl-2-[[hydroxy (alkoxy) phosphinyl]oxy]-alkylammonium designated as C8(-)-S-Cn(+), S = 2 and 3, n = 12, 14 and 16, were synthesized and characterized by instrumental techniques namely FT-IR, (1)H NMR, (13)C NMR, (31)P NMR and Mass spectral studies. These new gemini surfactants further investigated for their various surfactant properties. The critical micelle concentration (cmc) and the effectiveness of surface tension reduction (Πcmc) were determined as a function of surfactant concentration by means of surface tension measurement. Micellization and viscosity properties were investigated by surface tension, electrical conductivity, dye micellization and rheology techniques. The findings of the aqueous surfactant system obtained were impacted by polarity, size and the nature of zwitterions as the surface. The thermodynamic and viscosity properties of these surfactants found to be based on the structures of gemini surfactants.

  9. Test for Chemical Induction of Chromosome Aberrations in Cultured Chinese Hamster Ovary (CHO) Cells With and Without Metabolic Activation. Test Article: Dimethylamine-2-2ethyl azide (DMAZ)

    DTIC Science & Technology

    2008-07-26

    01’ per mg CPA Dilutions of the sample S9, ranging from 0.2 - 10% in S9 mix, were tested for their ability to activate benzo ( a ) pyrene (BP) and 2...be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1...concentrations of 10, 50, 100, 500, 1000, 2500, and 5000 ?g/mL in both with and without activation and was found negative for clastogenic potential. A

  10. Propylene glycol-linked amino acid/dipeptide diester prodrugs of oleanolic acid for PepT1-mediated transport: synthesis, intestinal permeability, and pharmacokinetics.

    PubMed

    Cao, Feng; Gao, Yahan; Wang, Meng; Fang, Lei; Ping, Qineng

    2013-04-01

    In our previous studies, ethylene glycol-linked amino acid diester prodrugs of oleanolic acid (OA), a Biopharmaceutics Classification System (BCS) class IV drug, designed to target peptide transporter 1 (PepT1) have been synthesized and evaluated. Unlike ethylene glycol, propylene glycol is of very low toxicity in vivo. In this study, propylene glycol was used as a linker to further compare the effect of the type of linker on the stability, permeability, affinity, and bioavailability of the prodrugs of OA. Seven diester prodrugs with amino acid/dipeptide promoieties containing L-Val ester (7a), L-Phe ester (7b), L-Ile ester (7c), D-Val-L-Val ester (9a), L-Val-L-Val ester (9b), L-Ala-L-Val ester (9c), and L-Ala-L-Ile ester (9d) were designed and successfully synthesized. In situ rat single-pass intestinal perfusion (SPIP) model was performed to screen the effective permeability (P(eff)) of the prodrugs. P(eff) of 7a, 7b, 7c, 9a, 9b, 9c, and 9d (6.7-fold, 2.4-fold, 1.24-fold, 1.22-fold, 4.15-fold, 2.2-fold, and 1.4-fold, respectively) in 2-(N-morpholino)ethanesulfonic acid buffer (MES) with pH 6.0 showed significant increase compared to that of OA (p < 0.01). In hydroxyethyl piperazine ethanesulfonic acid buffer (HEPES) of pH 7.4, except for 7c, 9a, and 9d, P(eff) of the other prodrugs containing 7a (5.2-fold), 7b (2.0-fold), 9b (3.1-fold), and 9c (1.7-fold) exhibited significantly higher values than that of OA (p < 0.01). In inhibition studies with glycyl-sarcosine (Gly-Sar, a typical substrate of PepT1), P(eff) of 7a (5.2-fold), 7b (2.0-fold), 9b (3.1-fold), and 9c (2.3-fold) had significantly reduced values (p < 0.01). Compared to the apparent permeability coefficient (P(app)) of OA with Caco-2 cell monolayer, significant enhancement of the P(app) of 7a (5.27-fold), 9b (3.31-fold), 9a (2.26-fold), 7b (2.10-fold), 7c (2.03-fold), 9c (1.87-fold), and 9d (1.39-fold) was also observed (p < 0.01). Inhibition studies with Gly-Sar (1 mM) showed that P(app) of 7a, 9b, and

  11. Study of O/W micro- and nano-emulsions based on propylene glycol diester as a vehicle for geranic acid.

    PubMed

    Jaworska, Małgorzata; Sikora, Elżbieta; Ogonowski, Jan; Konieczna, Monika

    2015-01-01

    Nano- and microemulsions containing as the oil phase caprylic/capric propylene glycol diesters (Crodamol PC) were investigated as potential vehicle for controlled release of geranic acid. The influence of emulsifiers and co-surfactants on stability of the emulsions was investigated. Different kind of polysorbates (ethoxylated esters of sorbitan and fatty acids) were applied as the emulsifiers. The short-chain alcohols (ethanol, 1-propanol, 1-butanol) were used as co-surfactants. The emulsions were prepared at ambient temperature (25°C), by the phase inversion composition method (PIC). The stable O/W high dispersed emulsion systems based on Crodamol PC, of mean droplets size less than 200 nm, were prepared. Microemulsions stabilized by the mixture of Polisorbat 80 and 1-butanol were characterized by the largest degree of dispersion (137 nm) and the lowest PDI value (0.094), at surfactant/co-surfactant: oil weight ratio 90:10. The stable nano-emulsion (mean droplet size of 33 nm) was obtained for surfactant: oil (S:O) weight ratio 90:10, without co-surfactant addition. This nano-emulsion was chosen to release studies. The obtained results showed that the prepared stable nano-emulsion can be used as a carrier for controlled release of geranic acid. The active substance release from the nano-emulsion and the oil solution, after 24 hours was 22%.

  12. Occurrence of phthalate diesters (phthalates), p-hydroxybenzoic acid esters (parabens), bisphenol A diglycidyl ether (BADGE) and their derivatives in indoor dust from Vietnam: Implications for exposure.

    PubMed

    Tran, Tri Manh; Minh, Tu Binh; Kumosani, Taha A; Kannan, Kurunthachalam

    2016-02-01

    Phthalate diesters (phthalates), esters of p-hydroxybenzoic acid (parabens), and bisphenol A diglycidyl ether (BADGE) are used in personal care products, food packages, household products, or pharmaceuticals. These compounds possess endocrine-disrupting potentials and have been reported to occur in the environment. Nevertheless, no previous studies have reported the occurrence of these compounds in indoor dust from Vietnam. In this study, nine phthalates, six parabens, and four BADGEs were determined in indoor dust samples collected from Hanoi, Hatinh, Hungyen, and Thaibinh, in Vietnam. Total concentrations of phthalates, parabens, and BADGEs in indoor dust ranged from 3440 to 106,000 ng/g (median: 22,600 ng/g), 40-840 ng/g (median: 123 ng/g), and 23 to 1750 ng/g (median: 184 ng/g), respectively. Based on the measured median concentration of phthalates, parabens, and BADGEs in indoor dust, we estimated human exposure doses to these compounds through indoor dust ingestion for various age groups. The exposure doses to phthalates, parabens, and BADGEs decreased with age and ranged from 19.4 to 90.4 ng/kg-bw/d, 0.113-0.528 ng/kg-bw/d, and 0.158-0.736 ng/kg-bw/d, respectively. This is the first study on the occurrence and human exposure of phthalates, parabens, and BADGEs in indoor dust from Vietnam.

  13. Phosphorus-containing fluorinated organics: polyfluoroalkyl phosphoric acid diesters (diPAPs), perfluorophosphonates (PFPAs), and perfluorophosphinates (PFPIAs) in residential indoor dust.

    PubMed

    De Silva, Amila O; Allard, Cody N; Spencer, Christine; Webster, Glenys M; Shoeib, Mahiba

    2012-11-20

    Indoor dust is thought to be a source of human exposure to perfluorocarboxylates (PFCAs) and perfluorosulfonates (PFSAs), but exposures to emerging organofluorine compounds, including precursors to PFCAs and PFSAs via indoor dust, remain unknown. We report an analytical method for measuring several groups of emerging phosphorus-containing fluorinated compounds, including polyfluoroalkyl phosphoric acid diesters (diPAP), perfluorophosphonates (PFPA), and perfluorophosphinates (PFPIA), as well as perfluoroethylcyclohexane sulfonate (PFECHS) in indoor dust. This method was used to analyze diPAP, PFPA, and PFPIA levels in 102 residential dust samples collected in 2007-2008 from Vancouver, Canada. The results indicated a predominant and ubiquitous presence of diPAPs (frequency of detection 100%, mean and median ΣdiPAPs 7637 and 2215 ng/g). Previously measured median concentrations of perfluorooctane sulfonate (PFOS), perfluorooctanoate (PFOA), and fluorotelomer alcohols (FTOHs) in the same samples were 14-74 times lower than ΣdiPAP levels, i.e. 71 ng/g PFOS, 30 ng/g PFOA, and 152 ng/g ΣFTOHs. PFPAs and PFPIAs were detected in 62% and 85% of samples, respectively, at concentrations nearly 3 orders of magnitude lower than diPAPs (median 2.3 ng/g ΣPFPAs and 2.3 ng/g ΣPFPIAs). PFECHS was detected in only 8% of dust samples. To the best of our knowledge, this is the first report of these compounds in indoor dust. In this study, diPAP concentrations represented 98% ± 7% of the total measured analytes in the dust samples. Detection of diPAPs at such high concentrations in indoor dust may represent an important and as-yet unrecognized indirect source of PFCA exposure in humans, given the identified biotransformation pathways. Identifying the sources of diPAPs to the indoor environment is a priority for future research to improve air quality in households.

  14. Uptake of 8:2 perfluoroalkyl phosphate diester and its degradation products by carrot and lettuce from compost-amended soil.

    PubMed

    Bizkarguenaga, E; Zabaleta, I; Prieto, A; Fernández, L A; Zuloaga, O

    2016-06-01

    The present work studied the uptake of 8:2 perfluoroalkyl phosphate diester (diPAP) by two different crops (lettuce and carrot) and two different amended soils. Firstly, the possible degradation of 8:2 diPAP in the absence of crop was studied and 8:2 monoPAP (monophosphate), 8:2 FTCA (saturated fluorotelomer carboxylate), 8:2 FTUCA (unsaturated fluorotelomer carboxylate), 7:3 FTCA (saturated fluorotelomer carboxylate), PFHpA (perfluoroheptanoic acid), PFHxA (perfluorohexanoic acid) and PFOA (perfluorooctanoic acid) were detected. In the presence of crops, different degradation products were detected in the soil and, while PFNA (perfluorononanoic acid), PFHpA, PFHxA, PFPeA (perfluoropentacoic acid), PFBA (perfluorobutanoic acid), 7:3 FTCA and PFOA were determined in the cultivation media when carrot was grown, PFOA was the only degradation product detected in the case of lettuce experiments. Regarding the uptake in carrot, all the degradation products except 7:3 FTCA were translocated from the soil to the carrot. Carrot core, peel and leaves bioconcentration factors, BCFs, were determined for 8:2 diPAP and its degradation products. Values lower than method detection limits for core and low BCFs in peel (0.025-0.042) and leaves (0.028-0.049) were achieved for 8:2 diPAP. Regarding to the degradation products, the higher their water solubility, the higher the plant translocation. In this sense, the lower the carbon chain length of PFCAs, the higher the BCFs determined (PFBA > PFHxA > PFHpA > PFOA > PFNA). In general, lower total BCFs were achieved when the total organic carbon of the soils increased. For lettuce experiments, 8:2 diPAP (0.04-0.18) and PFOA (0.28-1.57) were only determined in lettuce heart.

  15. Spectrophotometric Determination of Cr(III) and Pb(II) Using Their Complexes with 5,11,17,23-Tetra[(2-ethyl acetoethoxyphenyl)(azo)phenyl]calix[4]arene

    PubMed Central

    Van Tan, Le; Quang Hieu, Tran; Van Cuong, Nguyen

    2015-01-01

    New complexes of 5,11,17,23-tetra[(2-ethyl acetoethoxyphenyl)(azo)phenyl]calix[4]arene (TEAC) with Pb(II) and Cr(III) were prepared in basic solution with a mixture of MeOH and H2O as solvent. The ratio of TEAC and metal ion in complexes was found to be 1 : 1 under investigated condition. The complex formation constants (based on Benesi-Hildebrand method) for TEAC-Pb(II) and TEAC-Cr(III) were 4.03 × 104 and 1.2 × 104, respectively. Additionally, the molar extinction coefficients were 5 × 104 and 1.42 × 104 for TEAC-Pb(II) and TEAC-Cr(III), respectively. The H-Point Standard Addition Method (HPSAM) has been applied for simultaneous determination of complexes formation of Cr(III)/Pb(II) and TEAC with concentration from 2 : 1 to 1 : 20 (w/w). The proposed method was successfully utilized to invest lead and chromium contents in plating wastewater samples. The results for several analyzed samples were found to be in satisfied agreement with those acquired by using the inductively coupled plasma mass spectrometry (ICP-MS) technique. PMID:25984379

  16. Mixed Dementia

    MedlinePlus

    ... with Lewy bodies , What Is Alzheimer's? NIA-Funded Memory & Aging Project Reveals Mixed Dementia Common Data from ... commonly with Alzheimer's disease. For example, in the Memory and Aging Project study involving long-term cognitive ...

  17. Ion mixing

    NASA Technical Reports Server (NTRS)

    Matteson, S.; Nicolet, M.-A.

    1983-01-01

    Recent experimental studies of the ion-mixing phenomenon are summarized. Ion mixing is differentiated from ion implantation and shown to be a useful technique for overcoming the sputter-dependent limitations of implantation processes. The fundamental physical principles of ion/solid interactions are explored. The basic experimental configurations currently in use are characterized: bilayered samples, multilayered samples, and samples with a thin marker layer. A table listing the binary systems (metal-semiconductor or metal-metal) which have been investigated using each configuration is presented. Results are discussed, and some sample data are plotted. The prospects for future application of ion mixing to the alteration of solid surface properties are considered. Practical applications are seen as restricted by economic considerations to the production of small, expensive components or to fields (such as the semiconductor industry) which already have facilities for ion implantation.

  18. Lateral Mixing

    DTIC Science & Technology

    2013-09-30

    apl.uw.edu/dasaro LONG-TERM GOALS I seek to understand the processes controlling lateral mixing in the ocean, particularly at the submesoscale ...APPROACH During AESOP, Lee and D’Asaro pioneered an innovative approach to measuring submesoscale structure in strong fronts. An adaptive measurement...injection of potential vorticity and scalars is predicted to create an intense ‘ submesoscale soup’ of high small-scale variance. The combination of small

  19. Lateral Mixing

    DTIC Science & Technology

    2012-11-08

    to mesoscale forcing. APPROACH Figure 1: MVP system deployed from stern of R/V Endeavor in Sargasso Sea . 1 DISTRIBUTION STATEMENT A. Approved for...integrative efforts with other sea -going investigators and numerical modelers. The Lateral Mixing Experiment project was an ideal opportunity to...2011 I also participated in the sea -going part of this project, taking my group on the R/V Endeavor in June 2011. Our role was to sample around the

  20. Lateral Mixing

    DTIC Science & Technology

    2011-09-30

    ocean as it responds to mesoscale forcing. APPROACH Figure 1: MVP system deployed from stern of R/V Endeavor in Sargasso Sea . My approach for...therefore requires integrative efforts with other sea -going investigators and numerical modelers. The Lateral Mixing Experiment project was an ideal...also participated in the sea -going part of this project, taking my group on the R/V Endeavor in June 2011. Our role was to sample around the center of

  1. Are mixed explicit/implicit solvation models reliable for studying phosphate hydrolysis? A comparative study of continuum, explicit and mixed solvation models.

    SciTech Connect

    Kamerlin, Shina C. L.; Haranczyk, Maciej; Warshel, Arieh

    2009-05-01

    Phosphate hydrolysis is ubiquitous in biology. However, despite intensive research on this class of reactions, the precise nature of the reaction mechanism remains controversial. In this work, we have examined the hydrolysis of three homologous phosphate diesters. The solvation free energy was simulated by means of either an implicit solvation model (COSMO), hybrid quantum mechanical / molecular mechanical free energy perturbation (QM/MM-FEP) or a mixed solvation model in which N water molecules were explicitly included in the ab initio description of the reacting system (where N=1-3), with the remainder of the solvent being implicitly modelled as a continuum. Here, both COSMO and QM/MM-FEP reproduce Delta Gobs within an error of about 2kcal/mol. However, we demonstrate that in order to obtain any form of reliable results from a mixed model, it is essential to carefully select the explicit water molecules from short QM/MM runs that act as a model for the true infinite system. Additionally, the mixed models tend to be increasingly inaccurate the more explicit water molecules are placed into the system. Thus, our analysis indicates that this approach provides an unreliable way for modelling phosphate hydrolysis in solution.

  2. Mixed cryoglobulinemia

    PubMed Central

    Ferri, Clodoveo

    2008-01-01

    Mixed cryoglobulinemia (MC), type II and type III, refers to the presence of circulating cryoprecipitable immune complexes in the serum and manifests clinically by a classical triad of purpura, weakness and arthralgias. It is considered to be a rare disorder, but its true prevalence remains unknown. The disease is more common in Southern Europe than in Northern Europe or Northern America. The prevalence of 'essential' MC is reported as approximately 1:100,000 (with a female-to-male ratio 3:1), but this term is now used to refer to a minority of MC patients only. MC is characterized by variable organ involvement including skin lesions (orthostatic purpura, ulcers), chronic hepatitis, membranoproliferative glomerulonephritis, peripheral neuropathy, diffuse vasculitis, and, less frequently, interstitial lung involvement and endocrine disorders. Some patients may develop lymphatic and hepatic malignancies, usually as a late complication. MC may be associated with numerous infectious or immunological diseases. When isolated, MC may represent a distinct disease, the so-called 'essential' MC. The etiopathogenesis of MC is not completely understood. Hepatitis C virus (HCV) infection is suggested to play a causative role, with the contribution of genetic and/or environmental factors. Moreover, MC may be associated with other infectious agents or immunological disorders, such as human immunodeficiency virus (HIV) infection or primary Sjögren's syndrome. Diagnosis is based on clinical and laboratory findings. Circulating mixed cryoglobulins, low C4 levels and orthostatic skin purpura are the hallmarks of the disease. Leukocytoclastic vasculitis involving medium- and, more often, small-sized blood vessels is the typical pathological finding, easily detectable by means of skin biopsy of recent vasculitic lesions. Differential diagnoses include a wide range of systemic, infectious and neoplastic disorders, mainly autoimmune hepatitis, Sjögren's syndrome, polyarthritis, and B

  3. Theoretical studies of the hydroxide-catalyzed P-O cleavage reactions of neutral phosphate triesters and diesters in aqueous solution: examination of the changes induced by H/Me substitution.

    PubMed

    Iché-Tarrat, Nathalie; Barthelat, Jean-Claude; Rinaldi, Daniel; Vigroux, Alain

    2005-12-01

    DFT calculations and dielectric continuum methods have been employed to map out the lowest activation free-energy profiles for the alkaline hydrolysis of representative phosphate triesters and diesters, including trimethyl phosphate (TMP), dimethyl 4-nitrophenyl phosphate (DMNPP), dimethyl hydrogen phosphate (DMHP), and the dimethyl phosphate anion (DMP-). The reliability of the calculations is supported by the excellent agreement observed between the calculated and the experimentally determined activation enthalpies for phosphate triesters with poor (TMP) and good (DMNPP) leaving groups. The results obtained for the OH- + DMHP and OH- + DMP- reactions are also consistent with all the available experimental information concerning the hydrolysis reaction of dimethyl phosphate anion at pH > 5. By performing geometry optimizations in the dielectric field (epsilon = 78.39), we found that OH- can attack the phosphorus atom of DMHP without capturing its proton only if the O-H bond of DMHP is oriented opposite the attacking OH- group. In these conditions, the rate for OH- attack on DMHP was found to be approximately 10(3)-fold faster than that for OH- attack on TMP. The calculated rate acceleration induced by the phosphoryl proton corresponds to the maximum rate effect expected from kinetic studies. Overall, our calculations performed on the dimethyl phosphate ester predict that, contrary to what is generally observed for RNA and aryl phosphodiesters, the water-promoted P-O cleavage reaction of DNA should dominate the base-catalyzed reaction at pH 7. These results are suggestive that nucleases may be less proficient as catalysts than has recently been suspected.

  4. Mixing in astrophysics

    SciTech Connect

    Fryer, Christopher Lee

    2011-01-07

    Turbulent mixing plays a vital role in many fields in astronomy. Here I review a few of these sites, discuss the importance of this turbulent mixing and the techniques used by astrophysicists to solve these problems.

  5. Mixing in explosions

    SciTech Connect

    Kuhl, A.L.

    1993-12-01

    Explosions always contain embedded turbulent mixing regions, for example: boundary layers, shear layers, wall jets, and unstable interfaces. Described here is one particular example of the latter, namely, the turbulent mixing occurring in the fireball of an HE-driven blast wave. The evolution of the turbulent mixing was studied via two-dimensional numerical simulations of the convective mixing processes on an adaptive mesh. Vorticity was generated on the fireball interface by baroclinic effects. The interface was unstable, and rapidly evolved into a turbulent mixing layer. Four phases of mixing were observed: (1) a strong blast wave phase; (2) and implosion phase; (3) a reshocking phase; and (4) an asymptotic mixing phase. The flowfield was azimuthally averaged to evaluate the mean and r.m.s. fluctuation profiles across the mixing layer. The vorticity decayed due to a cascade process. This caused the corresponding enstrophy parameter to increase linearly with time -- in agreement with homogeneous turbulence calculations of G.K. Batchelor.

  6. Mixed inhibitors of angiotensin-converting enzyme and enkephalinase: Rational design, properties, and potential cardiovascular applications of glycopril and alatriopril

    SciTech Connect

    Gros, C.; Noel, N.; Souque, A.; Schwartz, J.C. ); Danvy, D.; Plaquevent, J.C.; Duhamel, L.; Duhamel, P. ); Lecomte, J.M. ); Bralet, J. )

    1991-05-15

    Angiotensin-converting enzyme (ACE) and enkephalinase, two cell surface metallopeptidases, are responsible for angiotensin II formation and atrial natriuretic factor (ANF) degradation, respectively, and thereby play a critical role in the metabolism of hormonal peptides exerting essentially opposite actions in cardiovascular regulations. To affect simultaneously both hormonal systems by a single molecular structure, the authors designed glycoprilat and alatrioprilat {l brace}(S)-N-(3-(3,4-methylenedioxyphenyl)-2-(mercaptomethyl)-1-oxopropyl)glycine and -alanine, respectively{r brace}. In vitro the two compounds inhibit both ACE and enkephalinase activities with similar, nanomolar potencies, and in vivo, glycopril and alatriopril, the corresponding diester prodrugs, occupy the two enzyme molecules in lung at similar low dosages. The high potency of these compounds is attributable to interaction of the methylenedioxy group with the S{sub 1} subsite of ACE and of the aromatic ring with the S{prime}{sub 1} subsite of enkephalinase. In rodents, low doses of these mixed inhibitors exert typical actions of ACE inhibitors--i.e., prevention of angiotensin I-induced hypertension-as well as of enkephalinase inhibitors--i.e., protection from {sup 125}I-ANF degradation or enhancement of diuresis and natriuresis following acute extracellular volume expansion. In view of the known counterbalanced physiological actions of the two hormonal peptides, whose metabolism is controlled by ACE and enkephalinase, mixed inhibitors of the two peptidases show promise for the treatment of various cardiovascular and salt-retention disorders.

  7. Mixed methods research.

    PubMed

    Halcomb, Elizabeth; Hickman, Louise

    2015-04-08

    Mixed methods research involves the use of qualitative and quantitative data in a single research project. It represents an alternative methodological approach, combining qualitative and quantitative research approaches, which enables nurse researchers to explore complex phenomena in detail. This article provides a practical overview of mixed methods research and its application in nursing, to guide the novice researcher considering a mixed methods research project.

  8. (+/-)-4-Aryl-4,5-dihydro-3H-1,3-benzodiazepines. 2. Nuclear-substituted analogues of (+/-)-4,5-dihydro-2,3-dimethyl-4-phenyl-3H-1,3-benzodiazepine and (+/-)-4,5-dihydro-2-ethyl-3-methyl-4-phenyl-3H-1,3-benzodiazepine as potential antidepressant agents.

    PubMed

    Martin, L L; Setescak, L L; Worm, M; Crichlow, C A; Geyer, H M; Wilker, J C

    1982-04-01

    Antidepressant-like activity, as evidenced by marked inhibition of tetrabenazine-induced ptosis, was previously reported for (+/-)-4,5-dihydro-4-phenyl-3H-1,3-benzodiazepine derivatives. Since optimal antitetrabenazine activity was associated with (+/-)-4,5-dihydro-2,3-dimethyl-4-phenyl-3H-1,3-benzodiazepine (9k, HRP 543) and the 2-ethyl-3-methyl analogue (10k), the synthesis and evaluation of nuclear-substituted derivatives of these two compounds was also investigated. The initial synthesis involved Friedel-Crafts acylation of substituted benzenes with 2-nitrophenylacetyl chloride to afford 1-aryl-2-(2-nitrophenyl)ethanones 2, which were converted in five steps to (+/-)-alpha-aryl-N-methyl-2-nitrobenzeneethanamines 7. Greater flexibility with respect to the introduction of nuclear substituents was achieved by conversion of 2-nitrotoluene derivatives to 2 via acylation of intermediate beta-(dimethylamino)-2-nitrostyrenes with various aroyl chlorides and hydrolysis. Reductive amination of 2 with methylamine and sodium cyanoborohydride afforded 7 directly and significantly reduced the number of synthetic steps. Reduction of 7a-j to diamines 8a-j and cyclization with appropriate ortho esters gave nuclear-substituted analogues of 9k and 10k. Marked antitetrabenazine activity was associated with many of these compounds. Significant enhancement of activity with respect to the unsubstituted analogues 9k and 10k was not observed, with the exception of 9c which appeared to be slightly more potent than 9k.

  9. Carboxylic acid accelerated formation of diesters

    DOEpatents

    Tustin, Gerald Charles; Dickson, Todd Jay

    1998-01-01

    This invention pertains to accelerating the rate of formation of 1,1-dicarboxylic esters from the reaction of an aldehyde with a carboxylic acid anhydride or a ketene in the presence of a non-iodide containing a strong Bronsted acid catalyst by the addition of a carboxylic acid at about one bar pressure and between about 0.degree. and 80.degree. C. in the substantial absence of a hydrogenation or carbonylation catalyst.

  10. Mixed oxide solid solutions

    DOEpatents

    Magno, Scott; Wang, Ruiping; Derouane, Eric

    2003-01-01

    The present invention is a mixed oxide solid solution containing a tetravalent and a pentavalent cation that can be used as a support for a metal combustion catalyst. The invention is furthermore a combustion catalyst containing the mixed oxide solid solution and a method of making the mixed oxide solid solution. The tetravalent cation is zirconium(+4), hafnium(+4) or thorium(+4). In one embodiment, the pentavalent cation is tantalum(+5), niobium(+5) or bismuth(+5). Mixed oxide solid solutions of the present invention exhibit enhanced thermal stability, maintaining relatively high surface areas at high temperatures in the presence of water vapor.

  11. Cement mixing with vibrator

    SciTech Connect

    Allen, T.E.

    1991-07-09

    This patent describes a method of cementing a casing string in a bore hole of a well. It comprises introducing water and dry cement material into a mixing vessel; mixing the water and dry cement material in the mixing vessel to form a cement slurry, the slurry including lumps of the dry cement material, the mixing including steps of: agitating the slurry; and while agitating the slurry, transmitting vibrational energy into the slurry and thereby aiding disintegration and subsequent wetting of the lumps of the dry cement material in the slurry; and pumping the slurry into an annulus between the casing string and the bore hole.

  12. Mixed waste minimization/mixed waste avoidance

    SciTech Connect

    Todisco, L.R.

    1994-12-31

    This presentation describes methods for the minimization and volume reduction of low-level radioactive and mixed wastes. Many methods are presented including: source reduction, better waste monitoring activities, waste segregation, recycling, administrative controls, and optimization of waste-generating processes.

  13. Dilution Zone Mixing

    NASA Technical Reports Server (NTRS)

    Holdeman, J. D.

    1983-01-01

    Studies to characterize dilution zone mixing; experiments on the effects of free-stream turbulence on a jet in crossflow; and the development of an interactive computer code for the analysis of the mixing of jets with a confined crossflow are reviewed.

  14. MHD turbulent mixing layers

    SciTech Connect

    Esquivel, A.; Lazarian, A.; Benjamin, R.A.; Cho, J.; Leitner, S.N.

    2005-09-28

    Turbulent mixing layers have been proposed to explain observations of line ratios of highly ionized elements in the interstellar medium. We present preliminary results of numerical simulations of turbulent mixing layers in a magnetized medium. We developed a MHD code with radiative cooling. The magnetic field is expected to be a controlling factor by suppressing instabilities that lead to the turbulent mixing. Our results suggest that the difference in turbulent mixing in the unmagnetized case as compared to the case of a weak magnetic field, {beta} = Pgas/Pmag {approx} 10, is insignificant. With a more thorough exploration of parameter space, this work will provide more reliable diagnostics of turbulent mixing layers than those available today.

  15. Microfluidic Mixing: A Review

    PubMed Central

    Lee, Chia-Yen; Chang, Chin-Lung; Wang, Yao-Nan; Fu, Lung-Ming

    2011-01-01

    The aim of microfluidic mixing is to achieve a thorough and rapid mixing of multiple samples in microscale devices. In such devices, sample mixing is essentially achieved by enhancing the diffusion effect between the different species flows. Broadly speaking, microfluidic mixing schemes can be categorized as either “active”, where an external energy force is applied to perturb the sample species, or “passive”, where the contact area and contact time of the species samples are increased through specially-designed microchannel configurations. Many mixers have been proposed to facilitate this task over the past 10 years. Accordingly, this paper commences by providing a high level overview of the field of microfluidic mixing devices before describing some of the more significant proposals for active and passive mixers. PMID:21686184

  16. ADVANCED MIXING MODELS

    SciTech Connect

    Lee, S; Richard Dimenna, R; David Tamburello, D

    2008-11-13

    The process of recovering the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank with one to four dual-nozzle jet mixers located within the tank. The typical criteria to establish a mixed condition in a tank are based on the number of pumps in operation and the time duration of operation. To ensure that a mixed condition is achieved, operating times are set conservatively long. This approach results in high operational costs because of the long mixing times and high maintenance and repair costs for the same reason. A significant reduction in both of these costs might be realized by reducing the required mixing time based on calculating a reliable indicator of mixing with a suitably validated computer code. The work described in this report establishes the basis for further development of the theory leading to the identified mixing indicators, the benchmark analyses demonstrating their consistency with widely accepted correlations, and the application of those indicators to SRS waste tanks to provide a better, physically based estimate of the required mixing time. Waste storage tanks at SRS contain settled sludge which varies in height from zero to 10 ft. The sludge has been characterized and modeled as micron-sized solids, typically 1 to 5 microns, at weight fractions as high as 20 to 30 wt%, specific gravities to 1.4, and viscosities up to 64 cp during motion. The sludge is suspended and mixed through the use of submersible slurry jet pumps. To suspend settled sludge, water is added to the tank as a slurry medium and stirred with the jet pump. Although there is considerable technical literature on mixing and solid suspension in agitated tanks, very little literature has been published on jet mixing in a large-scale tank. If shorter mixing times can be shown to support Defense Waste Processing Facility (DWPF) or other feed requirements, longer pump lifetimes can be achieved with associated operational cost and

  17. ADVANCED MIXING MODELS

    SciTech Connect

    Lee, S; Dimenna, R; Tamburello, D

    2011-02-14

    The process of recovering and processing High Level Waste (HLW) the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank with one to four mixers (pumps) located within the tank. The typical criteria to establish a mixed condition in a tank are based on the number of pumps in operation and the time duration of operation. To ensure that a mixed condition is achieved, operating times are typically set conservatively long. This approach results in high operational costs because of the long mixing times and high maintenance and repair costs for the same reason. A significant reduction in both of these costs might be realized by reducing the required mixing time based on calculating a reliable indicator of mixing with a suitably validated computer code. The focus of the present work is to establish mixing criteria applicable to miscible fluids, with an ultimate goal of addressing waste processing in HLW tanks at SRS and quantifying the mixing time required to suspend sludge particles with the submersible jet pump. A single-phase computational fluid dynamics (CFD) approach was taken for the analysis of jet flow patterns with an emphasis on the velocity decay and the turbulent flow evolution for the farfield region from the pump. Literature results for a turbulent jet flow are reviewed, since the decay of the axial jet velocity and the evolution of the jet flow patterns are important phenomena affecting sludge suspension and mixing operations. The work described in this report suggests a basis for further development of the theory leading to the identified mixing indicators, with benchmark analyses demonstrating their consistency with widely accepted correlations. Although the indicators are somewhat generic in nature, they are applied to Savannah River Site (SRS) waste tanks to provide a better, physically based estimate of the required mixing time. Waste storage tanks at SRS contain settled sludge which varies in

  18. The mixing of fluids

    SciTech Connect

    Ottino, J.M.

    1989-01-01

    What do the eruption of Krakatau, the manufacture of puff pastry and the brightness of stars have in common Each involves some aspect of mixing. Mixing also plays a critical role in modern technology. Chemical engineers rely on mixing to ensure that substances react properly, to produce polymer blends that exhibit unique properties and to disperse drag-reducing agents in pipelines. Yet in spite of its of its ubiquity in nature and industry, mixing is only imperfectly under-stood. Indeed, investigators cannot even settle on a common terminology: mixing is often referred to as stirring by oceanographers and geophysicists, as blending by polymer engineers and as agitation by process engineers. Regardless of what the process is called, there is little doubt that it is exceedingly complex and is found in a great variety of systems. In constructing a theory of fluid mixing, for example, one has to take into account fluids that can be miscible or partially miscible and reactive or inert, and flows that are slow and orderly or very fast and turbulent. It is therefore not surprising that no single theory can explain all aspect of mixing in fluids and that straightforward computations usually fail to capture all the important details. Still, both physical experiments and computer simulations can provide insight into the mixing process. Over the past several years the authors and his colleague have taken both approaches in an effort to increase understanding of various aspect of the process-particularly of mixing involving slow flows and viscous fluids such as oils.

  19. Mixing method and apparatus

    DOEpatents

    Green, Norman W.

    1982-06-15

    Method of mixing particulate materials comprising contacting a primary source and a secondary source thereof whereby resulting mixture ensues; preferably at least one of the two sources has enough motion to insure good mixing and the particulate materials may be heat treated if desired. Apparatus for such mixing comprising an inlet for a primary source, a reactor communicating therewith, a feeding means for supplying a secondary source to the reactor, and an inlet for the secondary source. Feeding means is preferably adapted to supply fluidized materials.

  20. Nearly discontinuous chaotic mixing

    SciTech Connect

    Sharp, David Howland; Lim, Hyun K; Yu, Yan; Glimm, James G

    2009-01-01

    A new scientific approach is presented for a broad class of chaotic problems involving a high degree of mixing over rapid time scales. Rayleigh-Taylor and Richtmyer-Meshkov unstable flows are typical of such problems. Microscopic mixing properties such as chemical reaction rates for turbulent mixtures can be obtained with feasible grid resolution. The essential dependence of (some) fluid mixing observables on transport phenomena is observed. This dependence includes numerical as well as physical transport and it includes laminar as well as turbulent transport. A new approach to the mathematical theory for the underlying equations is suggested.

  1. Guidelines for mixed waste minimization

    SciTech Connect

    Owens, C.

    1992-02-01

    Currently, there is no commercial mixed waste disposal available in the United States. Storage and treatment for commercial mixed waste is limited. Host States and compacts region officials are encouraging their mixed waste generators to minimize their mixed wastes because of management limitations. This document provides a guide to mixed waste minimization.

  2. Artificial upwelling and mixing

    SciTech Connect

    Not Available

    1989-01-01

    The authors present results related to artificial upwelling and coastal mariculture using deep ocean water and mixing in coastal waters. They discuss the application of research results for marine waste disposal.

  3. Mixed-Media Owls

    ERIC Educational Resources Information Center

    Schultz, Kathy

    2010-01-01

    The fun of creating collages is there are unlimited possibilities for the different kinds of materials one can use. In this article, the author describes how her eighth-grade students created an owl using mixed media.

  4. Asymmetric antiproton debuncher: No bad mixing, more good mixing

    SciTech Connect

    Visnjic, V.

    1994-07-01

    An asymmetric lattice for the Fermilab Antiproton Debuncher is designed. The lattice has zero mixing between the pickups and the kickers (bad mixing) while the mixing in the rest of the machine (good mixing) can be varied (even during the operation of the machine) in order to optimize the stochastic cooling. As an example, a lattice with zero bad mixing and twice the good mixing is presented. The betatron cooling rate in this lattice is twice its present value.

  5. Mixing of Supersonic Streams

    NASA Technical Reports Server (NTRS)

    Hawk, C. W.; Landrum, D. B.; Muller, S.; Turner, M.; Parkinson, D.

    1998-01-01

    The Strutjet approach to Rocket Based Combined Cycle (RBCC) propulsion depends upon fuel-rich flows from the rocket nozzles and turbine exhaust products mixing with the ingested air for successful operation in the ramjet and scramjet modes. It is desirable to delay this mixing process in the air-augmented mode of operation present during low speed flight. A model of the Strutjet device has been built and is undergoing test to investigate the mixing of the streams as a function of distance from the Strutjet exit plane during simulated low speed flight conditions. Cold flow testing of a 1/6 scale Strutjet model is underway and nearing completion. Planar Laser Induced Fluorescence (PLIF) diagnostic methods are being employed to observe the mixing of the turbine exhaust gas with the gases from both the primary rockets and the ingested air simulating low speed, air augmented operation of the RBCC. The ratio of the pressure in the turbine exhaust duct to that in the rocket nozzle wall at the point of their intersection is the independent variable in these experiments. Tests were accomplished at values of 1.0, 1.5 and 2.0 for this parameter. Qualitative results illustrate the development of the mixing zone from the exit plane of the model to a distance of about 10 rocket nozzle exit diameters downstream. These data show the mixing to be confined in the vertical plane for all cases, The lateral expansion is more pronounced at a pressure ratio of 1.0 and suggests that mixing with the ingested flow would be likely beginning at a distance of 7 nozzle exit diameters downstream of the nozzle exit plane.

  6. Mixing of Supersonic Streams

    NASA Technical Reports Server (NTRS)

    Hawk, C. W.; Landrum, D. B.; Muller, S.; Turner, M.; Parkinson, D.

    1998-01-01

    The Strutjet approach to Rocket Based Combined Cycle (RBCC) propulsion depends upon fuel-rich flows from the rocket nozzles and turbine exhaust products mixing with the ingested air for successful operation in the ramjet and scramjet modes. It is desirable to delay this mixing process in the air-augmented mode of operation present during low speed flight. A model of the Strutjet device has been built and is undergoing test to investigate the mixing of the streams as a function of distance from the Strutjet exit plane during simulated low speed flight conditions. Cold flow testing of a 1/6 scale Strutjet model is underway and nearing completion. Planar Laser Induced Fluorescence (PLIF) diagnostic methods are being employed to observe the mixing of the turbine exhaust gas with the gases from both the primary rockets and the ingested air simulating low speed, air augmented operation of the RBCC. The ratio of the pressure in the turbine exhaust duct to that in the rocket nozzle wall at the point of their intersection is the independent variable in these experiments. Tests were accomplished at values of 1.0, 1.5 and 2.0 for this parameter. Qualitative results illustrate the development of the mixing zone from the exit plane of the model to a distance of about 19 equivalent rocket nozzle exit diameters downstream. These data show the mixing to be confined in the vertical plane for all cases, The lateral expansion is more pronounced at a pressure ratio of 1.0 and suggests that mixing with the ingested flow would be likely beginning at a distance of 7 nozzle exit diameters downstream of the nozzle exit plane.

  7. Mixed waste management options

    SciTech Connect

    Owens, C.B.; Kirner, N.P.

    1991-12-31

    Disposal fees for mixed waste at proposed commercial disposal sites have been estimated to be $15,000 to $40,000 per cubit foot. If such high disposal fees are imposed, generators may be willing to apply extraordinary treatment or regulatory approaches to properly dispose of their mixed waste. This paper explores the feasibility of several waste management scenarios and attempts to answer the question: Can mixed waste be managed out of existence? Existing data on commercially generated mixed waste streams are used to identify the realm of mixed waste known to be generated. Each waste stream is evaluated from both a regulatory and technical perspective in order to convert the waste into a strictly low-level radioactive or a hazardous waste. Alternative regulatory approaches evaluated in this paper include a delisting petition, no migration petition, and a treatability variance. For each waste stream, potentially available treatment options are identified that could lead to these variances. Waste minimization methodology and storage for decay are also considered. Economic feasibility of each option is discussed broadly.

  8. Mixed waste: Proceedings

    SciTech Connect

    Moghissi, A.A.; Blauvelt, R.K.; Benda, G.A.; Rothermich, N.E.

    1993-12-31

    This volume contains the peer-reviewed and edited versions of papers submitted for presentation a the Second International Mixed Waste Symposium. Following the tradition of the First International Mixed Waste Symposium, these proceedings were prepared in advance of the meeting for distribution to participants. The symposium was organized by the Mixed Waste Committee of the American Society of Mechanical Engineers. The topics discussed at the symposium include: stabilization technologies, alternative treatment technologies, regulatory issues, vitrification technologies, characterization of wastes, thermal technologies, laboratory and analytical issues, waste storage and disposal, organic treatment technologies, waste minimization, packaging and transportation, treatment of mercury contaminated wastes and bioprocessing, and environmental restoration. Individual abstracts are catalogued separately for the data base.

  9. Natural convective mixing flows

    NASA Astrophysics Data System (ADS)

    Ramos, Eduardo; de La Cruz, Luis; del Castillo, Luis

    1998-11-01

    Natural convective mixing flows. Eduardo Ramos and Luis M. de La Cruz, National University of Mexico and Luis Del Castillo San Luis Potosi University. The possibility of mixing a fluid with a natural convective flow is analysed by solving numerically the mass, momentum and energy equations in a cubic container. Two opposite vertical walls of the container are assumed to have temperatures that oscillate as functions of time. The phase of the oscillations is chosen in such a way that alternating corrotating vortices are formed in the cavity. The mixing efficiency of this kind of flow is examined with a Lagrangian tracking technique. This work was partially financed by CONACyT-Mexico project number GE0044

  10. Remotely controllable mixing system

    NASA Technical Reports Server (NTRS)

    Belew, Robert R. (Inventor)

    1987-01-01

    A remotely controllable mixing system (210) in which a plurality of mixing assemblies (10a-10e) are arranged in an annular configuration, and wherein each assembly (10) employs a central chamber (16) and two outer, upper and lower, chambers (12, 14). Valves (18, 20) are positioned between chambers, and these valves (18, 20) for a given mixing assembly (10) are operated by upper and lower control rotors (29), which in turn are driven by upper and lower drive rotors (270, 270b). Additionally, a hoop (278) is compressed around upper control rotors (29) and a hoop (278b) is compressed around lower control rotors (29) to thus insure constant frictional engagement between all control rotors (29) and drive rotors (270, 270b). The drive rollers (270, 270b) are driven by a motor (213).

  11. Dilution jet mixing program

    NASA Technical Reports Server (NTRS)

    Srinivasan, R.; Coleman, E.; Johnson, K.

    1984-01-01

    Parametric tests were conducted to quantify the mixing of opposed rows of jets (two-sided injection) in a confined cross flow. Results show that jet penetrations for two sided injections are less than that for single-sided injections, but the jet spreading rates are faster for a given momentum ratio and orifice plate. Flow area convergence generally enhances mixing. Mixing characteristics with asymmetric and symmetric convergence are similar. For constant momentum ratio, the optimum S/H(0) with in-line injections is one half the optimum value for single sided injections. For staggered injections, the optimum S/H(0) is twice the optimum value for single-sided injection. The correlations developed predicted the temperature distributions within first order accuracy and provide a useful tool for predicting jet trajectory and temperature profiles in the dilution zone with two-sided injections.

  12. Mixing navigation on networks

    NASA Astrophysics Data System (ADS)

    Zhou, Tao

    2008-05-01

    In this article, we propose a mixing navigation mechanism, which interpolates between random-walk and shortest-path protocol. The navigation efficiency can be remarkably enhanced via a few routers. Some advanced strategies are also designed: For non-geographical scale-free networks, the targeted strategy with a tiny fraction of routers can guarantee an efficient navigation with low and stable delivery time almost independent of network size. For geographical localized networks, the clustering strategy can simultaneously increase efficiency and reduce the communication cost. The present mixing navigation mechanism is of significance especially for information organization of wireless sensor networks and distributed autonomous robotic systems.

  13. Atomization and mixing study

    NASA Technical Reports Server (NTRS)

    Ferrenberg, A.; Jaqua, V. W.

    1983-01-01

    The state of the art in atomization and mixing for triplet, pentad, and coaxial injectors is described. Injectors that are applicable for LOX/hydrocarbon propellants and main chamber and fuel rich preburner/gas generator mixture ratios are of special interest. Various applicable correlating equations and parameters as well as test data found in the literature are presented. The validity, utility, and important aspects of these data and correlations are discussed and the measurement techniques used are evaluated. Propellant mixing tests performed are described and summarized, results are reported, and tentative conclusions are included.

  14. Mixed crystal organic scintillators

    DOEpatents

    Zaitseva, Natalia P; Carman, M Leslie; Glenn, Andrew M; Hamel, Sebastien; Hatarik, Robert; Payne, Stephen A; Stoeffl, Wolfgang

    2014-09-16

    A mixed organic crystal according to one embodiment includes a single mixed crystal having two compounds with different bandgap energies, the organic crystal having a physical property of exhibiting a signal response signature for neutrons from a radioactive source, wherein the signal response signature does not include a significantly-delayed luminescence characteristic of neutrons interacting with the organic crystal relative to a luminescence characteristic of gamma rays interacting with the organic crystal. According to one embodiment, an organic crystal includes bibenzyl and stilbene or a stilbene derivative, the organic crystal having a physical property of exhibiting a signal response signature for neutrons from a radioactive source.

  15. Atomization and Mixing Study

    NASA Technical Reports Server (NTRS)

    Ferrenberg, A.; Hunt, K.; Duesberg, J.

    1985-01-01

    The primary objective was the obtainment of atomization and mixing performance data for a variety of typical liquid oxygen/hydrocarbon injector element designs. Such data are required to establish injector design criteria and to provide critical inputs to liquid rocket engine combustor performance and stability analysis, and computational codes and methods. Deficiencies and problems with the atomization test equipment were identified, and action initiated to resolve them. Test results of the gas/liquid mixing tests indicated that an assessment of test methods was required. A series of 71 liquid/liquid tests were performed.

  16. Sylgard® Mixing Study

    SciTech Connect

    Bello, Mollie; Welch, Cynthia F.; Goodwin, Lynne Alese; Keller, Jennie

    2014-08-22

    Sylgard® 184 and Sylgard® 186 silicone elastomers form Dow Corning® are used as potting agents across the Nuclear Weapons Complex. A standardized mixing procedure is required for filled versions of these products. The present study is a follow-up to a mixing study performed by MST-7 which established the best mixing procedure to use when adding filler to either 184 or 186 base resins. The most effective and consistent method of mixing resin and curing agent for three modified silicone elastomer recipes is outlined in this report. For each recipe, sample size, mixing type, and mixing time was varied over 10 separate runs. The results show that the THINKY™ Mixer gives reliable mixing over varying batch sizes and mixing times. Hand Mixing can give improved mixing, as indicated by reduced initial viscosity; however, this method is not consistent.

  17. Mixing and Transport.

    ERIC Educational Resources Information Center

    Ditmars, John D.

    1978-01-01

    Presents a literature review of longitudinal dispersion, mixing and transport in streams, rivers, lakes, reservoirs, estuaries, and oceans. This review covers also: (1) fluid-solid mixtures and (2) oil spill behavior. A list of 189 references published in 1976 and 1977 is presented. (HM)

  18. Mixed-Initiative Clustering

    ERIC Educational Resources Information Center

    Huang, Yifen

    2010-01-01

    Mixed-initiative clustering is a task where a user and a machine work collaboratively to analyze a large set of documents. We hypothesize that a user and a machine can both learn better clustering models through enriched communication and interactive learning from each other. The first contribution or this thesis is providing a framework of…

  19. Stabilizer for mixed fuels

    SciTech Connect

    Yamamura, M.; Igarashi, T.; Ukigai, T.

    1984-03-13

    A stabilizer for mixed fuels containing a reaction product obtained by reacting (1) a polyol having at least 3 hydroxyl groups in the molecule and a molecular weight of 400-10,000 with (2) an epihalohydrin, as the principal component.

  20. True Anonymity Without Mixes

    NASA Astrophysics Data System (ADS)

    Molina-Jimenez, C.; Marshall, L.

    2002-04-01

    Anonymizers based on mix computers interposed between the sender and the receiver of an e-mail message have been used in the Internet for several years by senders of e-mail messages who do not wish to disclose their identity. Unfortunately, the degree of anonymity provided by this paradigm is limited and fragile. First, the messages sent are not truly anonymous but pseudo-anonymous since one of the mixes, at least, always knows the sender's identity. Secondly, the strength of the system to protect the sender's identity depends on the ability and the willingness of the mixes to keep the secret. If the mixes fail, the sender/'s anonymity is reduced to pieces. In this paper, we propose a novel approach for sending truly anonymous messages over the Internet where the anonymous message is sent from a PDA which uses dynamically assigned temporary, non-personal, random IP and MAC addresses. Anonymous E-cash is used to pay for the service.

  1. Radial Mixing in Turbomachines

    DTIC Science & Technology

    1991-03-31

    Belgium March 31, 1991 Final Scientific Report June 1, 1989 - July 31, 1990 VUB -STR -17 Approved for public release; distribution unlimited. - Prepared ...secondary flows and turbulence as sources of mixing was investigated by conducting experiments using hot-wire anemometry and ehtylene tracer gas

  2. Group 13 and lanthanide complexes with mixed O,S anionic ligands derived from maltol.

    PubMed

    Monga, Vishakha; Patrick, Brian O; Orvig, Chris

    2005-04-18

    Four mixed O,S binding ligand precursors derived from maltol (3-hydroxy-2-methyl-4-pyrone) have been chelated to gallium(III), indium(III), and lanthanide(III) ions to yield a series of metal complexes. The four ligand precursors include two pyranthiones, 3-hydroxy-2-methyl-4-pyranthione, commonly known as thiomaltol (Htma), and 2-ethyl-3-hydroxy-4-pyranthione, commonly known as ethylthiomaltol (Hetma), and two pyridinethiones, 3-hydroxy-2-methyl-4(H)-pyridinethione (Hmppt) and 3-hydroxy-1,2-dimethyl-4-pyridinethione (Hdppt). Dimeric forms of the pyridinethiones, Hmppt dimer and Hdppt dimer, were also isolated and characterized. Complete characterization of the monomeric organic compounds is reported including acidity constants and crystal structures of Htma, Hetma, and Hdppt dimer. Reacting the four monomeric ligand precursors with Ga(3+) and In(3+) ions yielded new tris(bidentate ligand) complexes. X-ray-quality crystals of the fac isomer of Ga(tma)(3) were also obtained. New complexes with a range of lanthanides (Ln(3+)) were also synthesized with the two pyranthiones, Htma and Hetma. The synthesis reactions yielded complexes of the type LnL(3).xH(2)O and LnL(2)(OH).xH(2)O, as indicated by elemental analysis and spectroscopic evidence such as mass spectral data and IR and NMR spectra.

  3. [Dmt(1)]DALDA analogues with enhanced μ opioid agonist potency and with a mixed μ/κ opioid activity profile.

    PubMed

    Bai, Longxiang; Li, Ziyuan; Chen, Jiajia; Chung, Nga N; Wilkes, Brian C; Li, Tingyou; Schiller, Peter W

    2014-04-01

    Analogues of [Dmt(1)]DALDA (H-Dmt-d-Arg-Phe-Lys-NH2; Dmt=2',6'-dimethyltyrosine), a potent μ opioid agonist peptide with mitochondria-targeted antioxidant activity, were prepared by replacing Phe(3) with various 2',6'-dialkylated Phe analogues, including 2',6'-dimethylphenylalanine (Dmp), 2',4',6'-trimethylphenylalanine (Tmp), 2'-isopropyl-6'-methylphenylalanine (Imp) and 2'-ethyl-6'-methylphenylalanine (Emp), or with the bulky amino acids 3'-(1-naphthyl)alanine (1-Nal), 3'-(2-naphthyl)alanine (2-Nal) or Trp. Several compounds showed significantly increased μ agonist potency, retained μ receptor selectivity and are of interest as drug candidates for neuropathic pain treatment. Surprisingly, the Dmp(3)-, Imp(3)-, Emp(3)- and 1-Nal(3)-containing analogues showed much increased κ receptor binding affinity and had mixed μ/κ properties. In these cases, molecular dynamics studies indicated conformational preorganization of the unbound peptide ligands due to rotational restriction around the C(β)C(γ) bond of the Xxx(3) residue, in correlation with the observed κ receptor binding enhancement. Compounds with a mixed μ/κ opioid activity profile are known to have therapeutic potential for treatment of cocaine abuse.

  4. Mixing by individual swimmers

    NASA Astrophysics Data System (ADS)

    Pushkin, Dmitri; Shum, Henry; Yeomans, Julia

    2012-11-01

    Despite their evolutionary and technological importance, different biomixing mechanisms, their effectiveness and universality remain poorly understood. In this talk we focus on the Lagrangian transport of the surrounding fluid by swimmers. Low Re passive tracers advected by swimmers move in loops that are, in general, almost closed. We analyze the reasons for this behavior and, as non-closedness of the loops is a natural requirement for an efficient mixing, propose a classification of possible mechanisms for biogenic mixing. Next, we discuss the universal (common to all swimmers) and the swimmer-dependent features of the resulting tracer displacements and analyze the Darwin drift, the total fluid volume displaced by a swimmer passing from and to infinity. We show that the Darwin drift is finite for force-free swimmers and can be decomposed into a universal and a swimmer-dependent part. We illustrate our consideration with examples for model swimmers and biological data.

  5. Experiments in mixed reality

    NASA Astrophysics Data System (ADS)

    Krum, David M.; Sadek, Ramy; Kohli, Luv; Olson, Logan; Bolas, Mark

    2010-01-01

    As part of the Institute for Creative Technologies and the School of Cinematic Arts at the University of Southern California, the Mixed Reality lab develops technologies and techniques for presenting realistic immersive training experiences. Such experiences typically place users within a complex ecology of social actors, physical objects, and collections of intents, motivations, relationships, and other psychological constructs. Currently, it remains infeasible to completely synthesize the interactivity and sensory signatures of such ecologies. For this reason, the lab advocates mixed reality methods for training and conducts experiments exploring such methods. Currently, the lab focuses on understanding and exploiting the elasticity of human perception with respect to representational differences between real and virtual environments. This paper presents an overview of three projects: techniques for redirected walking, displays for the representation of virtual humans, and audio processing to increase stress.

  6. Magnetically driven surface mixing

    NASA Astrophysics Data System (ADS)

    Belkin, M.; Snezhko, A.; Aranson, I. S.; Kwok, W.-K.

    2009-07-01

    Magnetic microparticles suspended on the surface of liquid and energized by vertical alternating magnetic field exhibit complex collective behavior. Various immobile and self-propelled self-assembled structures have been observed. Here, we report on experimental studies of mixing and surface diffusion processes in this system. We show that the pattern-induced surface flows have properties of quasi-two-dimensional turbulence. Correspondingly, the surface advection of tracer particle exhibits properties of Brownian diffusion.

  7. Flows, Turbulence, and Mixing

    NASA Astrophysics Data System (ADS)

    Lazarian, Alex

    2003-07-01

    HST and FUSE spectra of distant UV-bright sources reveal interstellar absorption lines of high stages of ionization {O VI, C IV, N V, Si IV} arising in many different astrophysical environments such as superbubbles, interstellar chimneys, high-velocity clouds, galaxy halos and cosmic filaments. Turbulence, always present in the magnetized ISM, must mix the hot { 10^6 K} gas with cooler gas within "turbulent mixing layers". Present theory, based on 1D steady-state flows, suggest the line ratios in these layers differ significantly from photoionized gas, radiative shocks, cooling zones, or conduction fronts. These models are use to infer mass and energy fluxes important to understanding the ISM. We propose to develop a suite of 3D time-dependent models that properly calculate turbulent mixing. We will produce synthetic UV absorption lines and optical emission lines directly relevant to HST observations that use GHRS, STIS, and eventually, COS. These models will allow us to explore the sensitivity of the spectral diagnostics to magnetic field strength, turbulence intensity, and relative velocity of the hot and cold gas. We will publish the resulting grid of spectral diagnostics and make them available through the Web.

  8. Stochastic neutrino mixing mechanism

    NASA Astrophysics Data System (ADS)

    Guzzo, M. M.; de Holanda, P. C.; Peres, O. L. G.; Zavanin, E. M.

    2013-05-01

    We propose a mechanism which provides an explanation of the Gallium and antineutrino reactor anomalies. Differently from original Pontecorvo’s hypothesis, this mechanism is based on the phenomenological assumption in which the admixture of neutrino mass eigenstates in the moments of neutrino creation and detection can assume different configurations around the admixture parametrized by the usual values of the mixing angles θ12, θ23, and θ13. For simplicity, we assume a Gaussian distribution for the mixing angles in such a way that the average value of this distribution is given by the usual values of the mixing angles, and the width of the Gaussian is denoted by α. We show that the proposed mechanism provides a possible explanation for very short-baseline neutrino disappearance, necessary to accommodate Gallium and antineutrino reactor anomalies, which is not allowed in usual neutrino oscillations based on Pontecorvo’s original hypotheses. We also can describe high-energy oscillation experiments, like LSND, Fermi, and NuTeV, assuming a weakly energy dependent width parameter, α(E), that nicely fits all experimental results.

  9. Mixing kaons with mixed action chiral perturbation theory

    NASA Astrophysics Data System (ADS)

    Aubin, Christopher

    2006-12-01

    We calculate the neutral kaon mixing parameter, BK , to next-to-leading order in mixed action (domain-wall valence with staggered sea quarks) chiral perturbation theory. We find the expres- sion for BK in this mixed-action case only differs from the continuum partially quenched expres- sion by an additional analytic term. Additionally, in preparation for a lattice calculation of BK with a mixed action, we discuss quantitatively the effects of the taste violations as well as finite volume effects.

  10. MixSIAR: advanced stable isotope mixing models in R

    EPA Science Inventory

    Background/Question/Methods The development of stable isotope mixing models has coincided with modeling products (e.g. IsoSource, MixSIR, SIAR), where methodological advances are published in parity with software packages. However, while mixing model theory has recently been ex...

  11. Error Estimates for Mixed Methods.

    DTIC Science & Technology

    1979-03-01

    This paper presents abstract error estimates for mixed methods for the approximate solution of elliptic boundary value problems. These estimates are...then applied to obtain quasi-optimal error estimates in the usual Sobolev norms for four examples: three mixed methods for the biharmonic problem and a mixed method for 2nd order elliptic problems. (Author)

  12. Magnetically coupled system for mixing

    SciTech Connect

    Miller, III, Harlan; Meichel, George; Legere, Edward; Malkiel, Edwin; Woods, Robert Paul; Ashley, Oliver; Katz, Joseph; Ward, Jason; Petersen, Paul

    2014-04-01

    The invention provides a mixing system comprising a magnetically coupled drive system and a foil for cultivating algae, or cyanobacteria, in an open or enclosed vessel. The invention provides effective mixing, low energy usage, low capital expenditure, and ease of drive system component maintenance while maintaining the integrity of a sealed mixing vessel.

  13. Magnetically coupled system for mixing

    DOEpatents

    Miller, III, Harlan; Meichel, George; Legere, Edward; Malkiel, Edwin; Woods, Robert Paul; Ashley, Oliver; Katz, Joseph; Ward, Jason; Petersen, Paul

    2015-09-22

    The invention provides a mixing system comprising a magnetically coupled drive system and a foil for cultivating algae, or cyanobacteria, in an open or enclosed vessel. The invention provides effective mixing, low energy usage, low capital expenditure, and ease of drive system component maintenance while maintaining the integrity of a sealed mixing vessel.

  14. B Lifetimes and Mixing

    SciTech Connect

    Evans, Harold G.; /Indiana U.

    2009-05-01

    The Tevatron experiments, CDF and D0, have produced a wealth of new B-physics results since the start of Run II in 2001. We've observed new B-hadrons, seen new effects, and increased many-fold the precision with which we know the properties of b-quark systems. In these proceedings, we will discuss two of the most fruitful areas in the Tevatron B-physics program: lifetimes and mixing. We'll examine the experimental issues driving these analyses, present a summary of the latest results, and discuss prospects for the future.

  15. Collisional atomic mixing

    NASA Astrophysics Data System (ADS)

    Biersack, Jochen P.

    The collisional mixing of thin metal markers in silicon is investigated with the computer program TRIM-DYNAMIC (T-DYN). This code assumes that at high dose irradiation, the substrate Si or Ge, will get fully amorphized, and the recoil atom can stop in any position after slowing down below a certain final energy Ef (taken here as 3 eV). In order to avoid chemical effects, the system Au marker in a silicon matrix was chosen for the TRIM simulation. The results are in good agreement with the experimental findings, as compiled in the review article by Paine and Averback. Similar collisional mixing effects occur in the process of SIMS or Auger electron depth profiling, and cannot be avoided. An example is given here for a thin layer of arsenic vapor deposited on Si and covered by amorphous silicon. The analysing ion beam in this case was 14.5 keV Cs+ incident at 37° towards the surface normal. In comparison with the SIMS measurements by modern depth profiling equipment, again good agreement was found between the T-DYN results and the experiment.

  16. Transition mixing study

    NASA Technical Reports Server (NTRS)

    Reynolds, R.; White, C.

    1986-01-01

    A computer model capable of analyzing the flow field in the transition liner of small gas turbine engines is developed. A FORTRAN code has been assembled from existing codes and physical submodels and used to predict the flow in several test geometries which contain characteristics similar to transition liners, and for which experimental data was available. Comparisons between the predictions and measurements indicate that the code produces qualitative results but that the turbulence models, both K-E and algebraic Reynolds Stress, underestimate the cross-stream diffusion. The code has also been used to perform a numerical experiment to examine the effect of a variety of parameters on the mixing process in transition liners. Comparisons illustrate that geometries with significant curvature show a drift of the jet trajectory toward the convex wall and weaker wake region vortices and decreased penetration for jets located on the convex wall of the liner, when compared to jets located on concave walls. Also shown were the approximate equivalency of angled slots and round holes and a technique by which jet mixing correlations developed for rectangular channels can be used for can geometries.

  17. Wave mixing spectroscopy

    SciTech Connect

    Smith, R.W.

    1980-08-01

    Several new aspects of nonlinear or wave mixing spectroscopy were investigated utilizing the polarization properties of the nonlinear output field and the dependence of this field upon the occurrence of multiple resonances in the nonlinear susceptibility. First, it is shown theoretically that polarization-sensitive detection may be used to either eliminate or controllably reduce the nonresonant background in coherent anti-Stokes Raman spectroscopy, allowing weaker Raman resonances to be studied. The features of multi-resonant four-wave mixing are examined in the case of an inhomogeneously broadened medium. It is found that the linewidth of the nonlinear output narrows considerably (approaching the homogeneous width) when the quantum mechanical expressions for the doubly- and triply-resonant susceptibilities are averaged over a Doppler or strain broadened profile. Experimental studies of nonlinear processes in Pr/sup +3/:LaF/sub 3/ verify this linewidth narrowing, but indicate that this strain broadened system cannot be treated with a single broadening parameter as in the case of Doppler broadening in a gas. Several susceptibilities are measured from which are deduced dipole matrix elements and Raman polarizabilities related to the /sup 3/H/sub 4/, /sup 3/H/sub 6/, and /sup 3/P/sub 0/ levels of the praseodymium ions.

  18. Mixed methods, mixed methodology health services research in practice.

    PubMed

    Johnstone, P Lynne

    2004-02-01

    Mixed methods, mixed methodology research is a little documented but increasingly accepted approach employed to investigate organizational phenomena. The author presents a synthesis of literature that informed the decision to adopt a mixed methods, mixed methodology, dominantly naturalistic study approach to health services research in which she explored the process and organizational consequences of new artifact adoption in surgery. She describes the way whereby a collective case study involving five Australian hospitals yielded quantitative and qualitative data that were analyzed using inductive and/or deductive reasoning. She goes beyond the theoretical rational for employing a mixed methods, mixed methodology approach to present a summative conceptual model of the research process and describe the structural aspects of the dissertation in which the research was reported that should benefit researchers contemplating the value of such an approach.

  19. Mixed Mode Matrix Multiplication

    SciTech Connect

    Meng-Shiou Wu; Srinivas Aluru; Ricky A. Kendall

    2004-09-30

    In modern clustering environments where the memory hierarchy has many layers (distributed memory, shared memory layer, cache,...), an important question is how to fully utilize all available resources and identify the most dominant layer in certain computations. When combining algorithms on all layers together, what would be the best method to get the best performance out of all the resources we have? Mixed mode programming model that uses thread programming on the shared memory layer and message passing programming on the distributed memory layer is a method that many researchers are using to utilize the memory resources. In this paper, they take an algorithmic approach that uses matrix multiplication as a tool to show how cache algorithms affect the performance of both shared memory and distributed memory algorithms. They show that with good underlying cache algorithm, overall performance is stable. When underlying cache algorithm is bad, superlinear speedup may occur, and an increasing number of threads may also improve performance.

  20. Radioactive mixed waste disposal

    SciTech Connect

    Jasen, W.G.; Erpenbeck, E.G.

    1993-02-01

    Various types of waste have been generated during the 50-year history of the Hanford Site. Regulatory changes in the last 20 years have provided the emphasis for better management of these wastes. Interpretations of the Atomic Energy Act of 1954 (AEA), the Resource Conservation and Recovery Act of 1976 (RCRA), and the Hazardous and Solid Waste Amendments (HSWA) have led to the definition of radioactive mixed wastes (RMW). The radioactive and hazardous properties of these wastes have resulted in the initiation of special projects for the management of these wastes. Other solid wastes at the Hanford Site include low-level wastes, transuranic (TRU), and nonradioactive hazardous wastes. This paper describes a system for the treatment, storage, and disposal (TSD) of solid radioactive waste.

  1. Biogenic inputs to ocean mixing.

    PubMed

    Katija, Kakani

    2012-03-15

    Recent studies have evoked heated debate about whether biologically generated (or biogenic) fluid disturbances affect mixing in the ocean. Estimates of biogenic inputs have shown that their contribution to ocean mixing is of the same order as winds and tides. Although these estimates are intriguing, further study using theoretical, numerical and experimental techniques is required to obtain conclusive evidence of biogenic mixing in the ocean. Biogenic ocean mixing is a complex problem that requires detailed understanding of: (1) marine organism behavior and characteristics (i.e. swimming dynamics, abundance and migratory behavior), (2) mechanisms utilized by swimming animals that have the ability to mix stratified fluids (i.e. turbulence and fluid drift) and (3) knowledge of the physical environment to isolate contributions of marine organisms from other sources of mixing. In addition to summarizing prior work addressing the points above, observations on the effect of animal swimming mode and body morphology on biogenic fluid transport will also be presented. It is argued that to inform the debate on whether biogenic mixing can contribute to ocean mixing, our studies should focus on diel vertical migrators that traverse stratified waters of the upper pycnocline. Based on our understanding of mixing mechanisms, body morphologies, swimming modes and body orientation, combined with our knowledge of vertically migrating populations of animals, it is likely that copepods, krill and some species of gelatinous zooplankton and fish have the potential to be strong sources of biogenic mixing.

  2. Fluid mixing in stratified gravity currents: the Prandtl mixing length.

    PubMed

    Odier, P; Chen, J; Rivera, M K; Ecke, R E

    2009-04-03

    Shear-induced vertical mixing in a stratified flow is a key ingredient of thermohaline circulation. We experimentally determine the vertical flux of momentum and density of a forced gravity current using high-resolution velocity and density measurements. A constant eddy-viscosity model provides a poor description of the physics of mixing, but a Prandtl mixing length model relating momentum and density fluxes to mean velocity and density gradients works well. For the average gradient Richardson number Ri(g) approximately 0.08 and a Taylor Reynolds number Re(lambda) approximately 100, the mixing lengths are fairly constant, about the same magnitude, comparable to the turbulent shear length.

  3. Estimating beta-mixing coefficients

    PubMed Central

    McDonald, Daniel J.; Shalizi, Cosma Rohilla; Schervish, Mark

    2015-01-01

    The literature on statistical learning for time series assumes the asymptotic independence or “mixing” of the data-generating process. These mixing assumptions are never tested, and there are no methods for estimating mixing rates from data. We give an estimator for the beta-mixing rate based on a single stationary sample path and show it is L1-risk consistent. PMID:26279742

  4. Optimal broadcasting of mixed states

    SciTech Connect

    Dang Guifang; Fan Heng

    2007-08-15

    The N to M (M{>=}N) universal quantum broadcasting of mixed states {rho}{sup xN} is proposed for a qubit system. The broadcasting of mixed states is universal and optimal in the sense that the shrinking factor is independent of the input state and achieves the upper bound. The quantum broadcasting of mixed qubits is a generalization of the universal quantum cloning machine for identical pure input states. A pure state decomposition of the identical mixed qubits {rho}{sup xN} is obtained.

  5. Overview of Neutrino Mixing Models and Their Mixing Angle Predictions

    SciTech Connect

    Albright, Carl H.

    2009-11-01

    An overview of neutrino-mixing models is presented with emphasis on the types of horizontal flavor and vertical family symmetries that have been invoked. Distributions for the mixing angles of many models are displayed. Ways to differentiate among the models and to narrow the list of viable models are discussed.

  6. Mixed voltage VLSI design

    NASA Technical Reports Server (NTRS)

    Panwar, Ramesh; Rennels, David; Alkalaj, Leon

    1993-01-01

    A technique for minimizing the power dissipated in a Very Large Scale Integration (VLSI) chip by lowering the operating voltage without any significant penalty in the chip throughput even though low voltage operation results in slower circuits. Since the overall throughput of a VLSI chip depends on the speed of the critical path(s) in the chip, it may be possible to sustain the throughput rates attained at higher voltages by operating the circuits in the critical path(s) with a high voltage while operating the other circuits with a lower voltage to minimize the power dissipation. The interface between the gates which operate at different voltages is crucial for low power dissipation since the interface may possibly have high static current dissipation thus negating the gains of the low voltage operation. The design of a voltage level translator which does the interface between the low voltage and high voltage circuits without any significant static dissipation is presented. Then, the results of the mixed voltage design using a greedy algorithm on three chips for various operating voltages are presented.

  7. Mixed oxide fuel development

    SciTech Connect

    Leggett, R.D.; Omberg, R.P.

    1987-05-08

    This paper describes the success of the ongoing mixed-oxide fuel development program in the United States aimed at qualifying an economical fuel system for liquid metal cooled reactors. This development has been the cornerstone of the US program for the past 20 years and has proceeded in a deliberate and highly disciplined fashion with high emphasis on fuel reliability and operational safety as major features of an economical fuel system. The program progresses from feature testing in EBR-II to qualifying full size components in FFTF under fully prototypic conditions to establish a basis for extending allowable lifetimes. The development program started with the one year (300 EFPD) core, which is the FFTF driver fuel, continued with the demonstration of a two year (600 EFPD) core and is presently evaluating a three year (900 EFPD) fuel system. All three of these systems, consistent with other LMR fuel programs around the world, use fuel pellets gas bonded to a cladding tube that is assembled into a bundle and fitted into a wrapper tube or duct for ease of insertion into a core. The materials of construction progressed from austenitic CW 316 SS to lower swelling austenitic D9 to non swelling ferritic/martensitic HT9. 6 figs., 2 tabs.

  8. Mixing in polymeric microfluidic devices.

    SciTech Connect

    Schunk, Peter Randall; Sun, Amy Cha-Tien; Davis, Robert H.; Brotherton, Christopher M. (University of Colorado at Boulder, Boulder, CO)

    2006-04-01

    This SAND report describes progress made during a Sandia National Laboratories sponsored graduate fellowship. The fellowship was funded through an LDRD proposal. The goal of this project is development and characterization of mixing strategies for polymeric microfluidic devices. The mixing strategies under investigation include electroosmotic flow focusing, hydrodynamic focusing, physical constrictions and porous polymer monoliths. For electroosmotic flow focusing, simulations were performed to determine the effect of electroosmotic flow in a microchannel with heterogeneous surface potential. The heterogeneous surface potential caused recirculations to form within the microchannel. These recirculations could then be used to restrict two mixing streams and reduce the characteristic diffusion length. Maximum mixing occurred when the ratio of the mixing region surface potential to the average channel surface potential was made large in magnitude and negative in sign, and when the ratio of the characteristic convection time to the characteristic diffusion time was minimized. Based on these results, experiments were performed to evaluate the manipulation of surface potential using living-radical photopolymerization. The material chosen to manipulate typically exhibits a negative surface potential. Using living-radical surface grafting, a positive surface potential was produced using 2-(Dimethylamino)ethyl methacrylate and a neutral surface was produced using a poly(ethylene glycol) surface graft. Simulations investigating hydrodynamic focusing were also performed. For this technique, mixing is enhanced by using a tertiary fluid stream to constrict the two mixing streams and reduce the characteristic diffusion length. Maximum mixing occurred when the ratio of the tertiary flow stream flow-rate to the mixing streams flow-rate was maximized. Also, like the electroosmotic focusing mixer, mixing was also maximized when the ratio of the characteristic convection time to the

  9. Anomalous Sediment Mixing by Bioturbation

    NASA Astrophysics Data System (ADS)

    Roche, K. R.; Aubeneau, A. F.; Xie, M.; Packman, A. I.

    2013-12-01

    Bioturbation, the reworking of sediments by animals and plants, is the dominant mode of sediment mixing in low-energy environments, and plays an important role in sedimentary biogeochemical processes. Mixing resulting from bioturbation has historically been modeled as a diffusive process. However, diffusion models often do not provide a sufficient description of sediment mixing due to bioturbation. Stochastic models, such as the continuous time random walk (CTRW) model, provide more general descriptions of mixing behavior that are applicable even when regular diffusion assumptions are not met. Here we present results from an experimental investigation of anomalous sediment mixing by bioturbation in freshwater sediments. Clean and heavy-metal-contaminated sediments were collected from Lake DePue, a backwater lake of the Illinois River. The burrowing worm species Lumbriculus variegatus was introduced to homogenized Lake DePue sediments in aerated aquaria. We then introduced inert fine fluorescent particles to the sediment-water interface. Using time-lapse photography, we observed the mixing of the fluorescent particles into the sediment bed over a two-week period. We developed image analysis software to characterize the concentration distribution of the fluorescent particles as a function of sediment depth, and applied this to the time-series of images to evaluate sediment mixing. We fit a one-dimensional CTRW model to the depth profiles to evaluate the underlying statistical properties of the mixing behavior. This analysis suggests that the sediment mixing caused by L. variegatus burrowing is subdiffusive in time and superdiffusive in space. We also found that heavy metal contamination significantly reduces L. variegatus burrowing, causing increasingly anomalous sediment mixing. This result implies that there can be important feedbacks between sediment chemistry, organism behavior, and sediment mixing that are not considered in current environmental models.

  10. Vanadium complexes with mixed O,S anionic ligands derived from maltol: synthesis, characterization, and biological studies.

    PubMed

    Monga, Vishakha; Thompson, Katherine H; Yuen, Violet G; Sharma, Vijay; Patrick, Brian O; McNeill, John H; Orvig, Chris

    2005-04-18

    Four mixed O,S binding bidentate ligand precursors derived from maltol (3-hydroxy-2-methyl-4-pyrone) have been chelated to vanadium to yield new bis(ligand)oxovanadium(IV) and tris(ligand)vanadium(III) complexes. The four ligand precursors include two pyranthiones, 3-hydroxy-2-methyl-4-pyranthione, commonly known as thiomaltol (Htma), and 2-ethyl-3-hydroxy-4-pyranthione, commonly known as ethylthiomaltol (Hetma), as well as two pyridinethiones, 3-hydroxy-2-methyl-4(H)-pyridinethione (Hmppt) and 3-hydroxy-1,2-dimethyl-4-pyridinethione (Hdppt). Vanadium complex formation was confirmed by elemental analysis, mass spectrometry, and IR and EPR (where possible) spectroscopies. The X-ray structure of oxobis(thiomaltolato)vanadium(IV),VO(tma)(2), was also determined; both cis and trans isomers were isolated in the same asymmetric unit. In both isomers, the two thiomaltolato ligands are arranged around the base of the square pyramid with the V=O linkage perpendicular; the vanadium atom is slightly displaced from the basal plane [V(1) = 0.656(3) A, V(2) = 0.664(2) A]. All of the new complexes were screened for insulin-enhancing effectiveness in streptozotocin-induced diabetes in rats, and VO(tma)(2) was profiled metabolically for urinary vanadium and ligand clearance by GFAAS and ESIMS, respectively. The new vanadium complexes did not lower blood glucose levels acutely, possibly because of rapid dissociation and excretion.

  11. Microfluidic mixing using contactless dielectrophoresis.

    PubMed

    Salmanzadeh, Alireza; Shafiee, Hadi; Davalos, Rafael V; Stremler, Mark A

    2011-09-01

    The first experimental evidence of mixing enhancement in a microfluidic system using contactless dielectrophoresis (cDEP) is presented in this work. Pressure-driven flow of deionized water containing 0.5 μm beads was mixed in various chamber geometries by imposing a dielectrophoresis (DEP) force on the beads. In cDEP the electrodes are not in direct contact with the fluid sample but are instead capacitively coupled to the mixing chamber through thin dielectric barriers, which eliminates many of the problems encountered with standard DEP. Four system designs with rectangular and circular mixing chambers were fabricated in PDMS. Mixing tests were conducted for flow rates from 0.005 to 1 mL/h subject to an alternating current signal range of 0-300 V at 100-600 kHz. When the time scales of the bulk fluid motion and the DEP motion were commensurate, rapid mixing was observed. The rectangular mixing chambers were found to be more efficient than the circular chambers. This approach shows potential for mixing low diffusivity biological samples, which is a very challenging problem in laminar flows at small scales.

  12. Mixed-Methods Research Methodologies

    ERIC Educational Resources Information Center

    Terrell, Steven R.

    2012-01-01

    Mixed-Method studies have emerged from the paradigm wars between qualitative and quantitative research approaches to become a widely used mode of inquiry. Depending on choices made across four dimensions, mixed-methods can provide an investigator with many design choices which involve a range of sequential and concurrent strategies. Defining…

  13. Mixed Waste Working Group report

    SciTech Connect

    Not Available

    1993-11-09

    The treatment of mixed waste remains one of this country`s most vexing environmental problems. Mixed waste is the combination of radioactive waste and hazardous waste, as defined by the Resource Conservation and Recovery Act (RCRA). The Department of Energy (DOE), as the country`s largest mixed waste generator, responsible for 95 percent of the Nation`s mixed waste volume, is now required to address a strict set of milestones under the Federal Facility Compliance Act of 1992. DOE`s earlier failure to adequately address the storage and treatment issues associated with mixed waste has led to a significant backlog of temporarily stored waste, significant quantities of buried waste, limited permanent disposal options, and inadequate treatment solutions. Between May and November of 1993, the Mixed Waste Working Group brought together stakeholders from around the Nation. Scientists, citizens, entrepreneurs, and bureaucrats convened in a series of forums to chart a course for accelerated testing of innovative mixed waste technologies. For the first time, a wide range of stakeholders were asked to examine new technologies that, if given the chance to be tested and evaluated, offer the prospect for better, safer, cheaper, and faster solutions to the mixed waste problem. In a matter of months, the Working Group has managed to bridge a gap between science and perception, engineer and citizen, and has developed a shared program for testing new technologies.

  14. Mixed connective tissue disease.

    PubMed

    Gunnarsson, Ragnar; Hetlevik, Siri Opsahl; Lilleby, Vibke; Molberg, Øyvind

    2016-02-01

    The concept of mixed connective tissue disease (MCTD) as a separate connective tissue disease (CTD) has persisted for more than four decades. High titers of antibodies targeting the U1 small nuclear ribonucleoprotein particle (U1 snRNP) in peripheral blood are a sine qua non for the diagnosis of MCTD, in addition to distinct clinical features including Raynaud's phenomenon (RP), "puffy hands," arthritis, myositis, pleuritis, pericarditis, interstitial lung disease (ILD), and pulmonary hypertension (PH). Recently, population-based epidemiology data from Norway estimated the point prevalence of adult-onset MCTD to be 3.8 per 100,000 and the mean annual incidence to be 2.1 per million per year, supporting the notion that MCTD is the least common CTD. Little is known about the etiology of MCTD, but recent genetic studies have confirmed that MCTD is a strongly HLA (​human leukocyte antigen)-linked disease, as the HLA profiles of MCTD differ distinctly from the corresponding profiles of ethnically matched healthy controls and other CTDs. In the first section of this review, we provide an update on the clinical, immunological, and genetic features of MCTD and discuss the relationship between MCTD and the other CTDs. Then we proceed to discuss the recent advances in therapy and our current understanding of prognosis and prognostic factors, especially those that are associated with the more serious pulmonary and cardiovascular complications of the disease. In the final section, we discuss some of the key, unresolved questions related to anti-RNP-associated diseases and indicate how these questions may be approached in future studies.

  15. Biomass conversion to mixed alcohols

    SciTech Connect

    Holtzapple, M.T.; Loescher, M.; Ross, M.

    1996-10-01

    This paper discusses the MixAlco Process which converts a wide variety of biomass materials (e.g. municipal solid waste, sewage sludge, agricultural residues) to mixed alcohols. First, the biomass is treated with lime to enhance its digestibility. Then, a mixed culture of acid-forming microorganisms converts the lime-treated biomass to volatile fatty acids (VFA) such as acetic, propionic, and butyric acids. To maintain fermentor pH, a neutralizing agent (e.g. calcium carbonate or lime) is added, so the fermentation actually produces VFA salts such as calcium acetate, propionate, and butyrate. The VFA salts are recovered and thermally converted to ketones (e.g. acetone, methylethyl ketone, diethyl ketone) which are subsequently hydrogenated to mixed alcohols (e.g. isopropanol, isobutanol, isopentanol). Processing costs are estimated at $0.72/gallon of mixed alcohols making it potentially attractive for transportation fuels.

  16. Mixing in confined stratified aquifers

    NASA Astrophysics Data System (ADS)

    Bolster, Diogo; Valdés-Parada, Francisco J.; LeBorgne, Tanguy; Dentz, Marco; Carrera, Jesus

    2011-03-01

    Spatial variability in a flow field leads to spreading of a tracer plume. The effect of microdispersion is to smooth concentration gradients that exist in the system. The combined effect of these two phenomena leads to an 'effective' enhanced mixing that can be asymptotically quantified by an effective dispersion coefficient (i.e. Taylor dispersion). Mixing plays a fundamental role in driving chemical reactions. However, at pre-asymptotic times it is considerably more difficult to accurately quantify these effects by an effective dispersion coefficient as spreading and mixing are not the same (but intricately related). In this work we use a volume averaging approach to calculate the concentration distribution of an inert solute release at pre-asymptotic times in a stratified formation. Mixing here is characterized by the scalar dissipation rate, which measures the destruction of concentration variance. As such it is an indicator for the degree of mixing of a system. We study pre-asymptotic solute mixing in terms of explicit analytical expressions for the scalar dissipation rate and numerical random walk simulations. In particular, we divide the concentration field into a mean and deviation component and use dominant balance arguments to write approximate governing equations for each, which we then solve analytically. This allows us to explicitly evaluate the separate contributions to mixing from the mean and the deviation behavior. We find an approximate, but accurate expression (when compared to numerical simulations) to evaluate mixing. Our results shed some new light on the mechanisms that lead to large scale mixing and allow for a distinction between solute spreading, represented by the mean concentration, and mixing, which comes from both the mean and deviation concentrations, at pre-asymptotic times.

  17. Baroclinic mixing in HE fireballs

    SciTech Connect

    Kuhl, A.L.; Ferguson, R.E.; Priolo, F.; Chien, K.Y.; Collins, J.P.

    1993-08-01

    Numerical simulations of the turbulent mixing in the fireball of an HE blast wave were performed with a second-order Godunov code. Adaptive mesh refinement was used to capture the convective mixing processes on the computational grid. The calculations revealed that the interface between the shock-compressed air and the dense detonation products was unstable. Vorticity was generated in that region by baroclinic effects. This caused the interface to roll-up into a turbulent mixing layer. Four phases of mixing were identified: a strong blast wave phase, where the mixing region was swept outward by the shockinduced flow; an implosion phase, that stretched the inner boundary of the mixing region back toward the origin; a re-shocking phase, where the imploding shock expands back outward from the origin and re-energizes the mixing later by RichtmyerMeshkov effects; and an asymptotic mixing phase, where line-scale structures are continually recreated by folding effects but the overall vorticity decays through a cascade process. The flowfield was azimuthally averaged to evaluate the mean-flow profiles and r.m.s. fluctuation profiles across the mixing layer. The mean kinetic energy rapidly approached zero as the blast wave decayed, but the fluctuating kinetic energy asymptotically approached a small constant value. This represents the rotational kinetic energy driven by the vorticity field, that continued to mix the fluid at late times. It was shown that the vorticity field corresponds to a function that fluctuates between plus and minus values-with a volume-averaged mean of zero.

  18. Compressibility effects on turbulent mixing

    NASA Astrophysics Data System (ADS)

    Panickacheril John, John; Donzis, Diego

    2016-11-01

    We investigate the effect of compressibility on passive scalar mixing in isotropic turbulence with a focus on the fundamental mechanisms that are responsible for such effects using a large Direct Numerical Simulation (DNS) database. The database includes simulations with Taylor Reynolds number (Rλ) up to 100, turbulent Mach number (Mt) between 0.1 and 0.6 and Schmidt number (Sc) from 0.5 to 1.0. We present several measures of mixing efficiency on different canonical flows to robustly identify compressibility effects. We found that, like shear layers, mixing is reduced as Mach number increases. However, data also reveal a non-monotonic trend with Mt. To assess directly the effect of dilatational motions we also present results with both dilatational and soleniodal forcing. Analysis suggests that a small fraction of dilatational forcing decreases mixing time at higher Mt. Scalar spectra collapse when normalized by Batchelor variables which suggests that a compressive mechanism similar to Batchelor mixing in incompressible flows might be responsible for better mixing at high Mt and with dilatational forcing compared to pure solenoidal mixing. We also present results on scalar budgets, in particular on production and dissipation. Support from NSF is gratefully acknowledged.

  19. Mixed features in bipolar disorder.

    PubMed

    Solé, Eva; Garriga, Marina; Valentí, Marc; Vieta, Eduard

    2016-12-29

    Mixed affective states, defined as the coexistence of depressive and manic symptoms, are complex presentations of manic-depressive illness that represent a challenge for clinicians at the levels of diagnosis, classification, and pharmacological treatment. The evidence shows that patients with bipolar disorder who have manic/hypomanic or depressive episodes with mixed features tend to have a more severe form of bipolar disorder along with a worse course of illness and higher rates of comorbid conditions than those with non-mixed presentations. In the updated Diagnostic and Statistical Manual of Mental Disorders (5th ed.; DSM-5), the definition of "mixed episode" has been removed, and subthreshold nonoverlapping symptoms of the opposite pole are captured using a "with mixed features" specifier applied to manic, hypomanic, and major depressive episodes. However, the list of symptoms proposed in the DSM-5 specifier has been widely criticized, because it includes typical manic symptoms (such as elevated mood and grandiosity) that are rare among patients with mixed depression, while excluding symptoms (such as irritability, psychomotor agitation, and distractibility) that are frequently reported in these patients. With the new classification, mixed depressive episodes are three times more common in bipolar II compared with unipolar depression, which partly contributes to the increased risk of suicide observed in bipolar depression compared to unipolar depression. Therefore, a specific diagnostic category would imply an increased diagnostic sensitivity, would help to foster early identification of symptoms and ensure specific treatment, as well as play a role in suicide prevention in this population.

  20. Mapping the Mixed Methods–Mixed Research Synthesis Terrain

    PubMed Central

    Sandelowski, Margarete; Voils, Corrine I.; Leeman, Jennifer; Crandell, Jamie L.

    2012-01-01

    Mixed methods–mixed research synthesis is a form of systematic review in which the findings of qualitative and quantitative studies are integrated via qualitative and/or quantitative methods. Although methodological advances have been made, efforts to differentiate research synthesis methods have been too focused on methods and not focused enough on the defining logics of research synthesis—each of which may be operationalized in different ways—or on the research findings themselves that are targeted for synthesis. The conduct of mixed methods–mixed research synthesis studies may more usefully be understood in terms of the logics of aggregation and configuration. Neither logic is preferable to the other nor tied exclusively to any one method or to any one side of the qualitative/quantitative binary. PMID:23066379

  1. Mixed deterministic and probabilistic networks.

    PubMed

    Mateescu, Robert; Dechter, Rina

    2008-11-01

    The paper introduces mixed networks, a new graphical model framework for expressing and reasoning with probabilistic and deterministic information. The motivation to develop mixed networks stems from the desire to fully exploit the deterministic information (constraints) that is often present in graphical models. Several concepts and algorithms specific to belief networks and constraint networks are combined, achieving computational efficiency, semantic coherence and user-interface convenience. We define the semantics and graphical representation of mixed networks, and discuss the two main types of algorithms for processing them: inference-based and search-based. A preliminary experimental evaluation shows the benefits of the new model.

  2. Mixed deterministic and probabilistic networks

    PubMed Central

    Dechter, Rina

    2010-01-01

    The paper introduces mixed networks, a new graphical model framework for expressing and reasoning with probabilistic and deterministic information. The motivation to develop mixed networks stems from the desire to fully exploit the deterministic information (constraints) that is often present in graphical models. Several concepts and algorithms specific to belief networks and constraint networks are combined, achieving computational efficiency, semantic coherence and user-interface convenience. We define the semantics and graphical representation of mixed networks, and discuss the two main types of algorithms for processing them: inference-based and search-based. A preliminary experimental evaluation shows the benefits of the new model. PMID:20981243

  3. [Marketing mix in health service].

    PubMed

    Ameri, Cinzia; Fiorini, Fulvio

    2015-01-01

    The marketing mix is the combination of the marketing variables that a firm employs with the purpose to achieve the expected volume of business within its market. In the sale of goods, four variables compose the marketing mix (4 Ps): Product, Price, Point of sale and Promotion. In the case of providing services, three further elements play a role: Personnel, Physical Evidence and Processes (7 Ps). The marketing mix must be addressed to the consumers as well as to the employees of the providing firm. Furthermore, it must be interpreted as employees ability to satisfy customers (interactive marketing).

  4. Waveguide Four-Wave Mixing

    DTIC Science & Technology

    1991-10-01

    PL-TR--91-1045 /’--"PL-TR-- AD-A243 555 91-1045 WAVEGUIDE FOUR -WAVE MIXING Thomas B. Simpson Jia-ming Liu JAYCOR San Diego, CA 92186-5154 October...Final Report; May 88 - Mar 91 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS WAVEGUIDE FOUR -WAVE MIXING C: F29601-88-C-0023 PE: 62601F PR: 3326 6. AUTHOR(S...for public release; distribution unlimited. 13. ABSTRACT (Maximum 200 words) This program has investigated four -wave mixing (4-win) in non- linear

  5. Biodegradation of mixed pesticides by mixed pesticide enriched cultures.

    PubMed

    Krishna, K Rama; Philip, Ligy

    2009-01-01

    This paper discusses the degradation kinetics of mixed (lindane, methyl parathion and carbofuran) pesticides by mixed pesticide enriched cultures (MEC) under various environmental conditions. The bacterial strains isolated from the mixed microbial consortium were identified as Pseudomonas aeruginosa (MTCC 9236), Bacillus sp. (MTCC 9235) and Chryseobacterium joostei (MTCC 9237). Batch studies were conducted to estimate the biokinetic parameters like the maximum specific growth rate (mu(max)), Yield Coefficient (Y(T)), half saturation concentration (K(s)) and inhibition concentration (Ki) for individual and mixed pesticide enriched cultures. The cultures enriched in a particular pollutant always showed high growth rate and low inhibition in that particular pollutant compared to MEC. After seven weeks of incubation, mixed pesticide enriched cultures were able to degrade 72% lindane, 95% carbofuran and 100% of methyl parathion in facultative co-metabolic conditions. In aerobic systems, degradation efficiencies of lindane methyl parathion and carbofuran were increased by the addition of 2g L(- 1) of dextrose. Though many metabolic compounds of mixed pesticides were observed at different time intervals, none of the metabolites were persistent. Based on the observed metabolites, a degradation pathway was postulated for different pesticides under various environmental conditions.

  6. Modeling Mix in ICF Implosions

    NASA Astrophysics Data System (ADS)

    Weber, C. R.; Clark, D. S.; Chang, B.; Eder, D. C.; Haan, S. W.; Jones, O. S.; Marinak, M. M.; Peterson, J. L.; Robey, H. F.

    2014-10-01

    The observation of ablator material mixing into the hot spot of ICF implosions correlates with reduced yield in National Ignition Campaign (NIC) experiments. Higher Z ablator material radiatively cools the central hot spot, inhibiting thermonuclear burn. This talk focuses on modeling a ``high-mix'' implosion from the NIC, where greater than 1000 ng of ablator material was inferred to have mixed into the hot spot. Standard post-shot modeling of this implosion does not predict the large amounts of ablator mix necessary to explain the data. Other issues are explored in this talk and sensitivity to the method of radiation transport is found. Compared with radiation diffusion, Sn transport can increase ablation front growth and alter the blow-off dynamics of capsule dust. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

  7. Is the tribimaximal mixing accidental?

    SciTech Connect

    Abbas, Mohammed; Smirnov, A. Yu.

    2010-07-01

    The tribimaximal (TBM) mixing is not accidental if structures of the corresponding leptonic mass matrices follow immediately from certain (residual or broken) flavor symmetry. We develop a simple formalism which allows one to analyze effects of deviations of the lepton mixing from TBM on the structure of the neutrino mass matrix and on the underlying flavor symmetry. We show that possible deviations from the TBM mixing can lead to strong modifications of the mass matrix and strong violation of the TBM-mass relations. As a result, the mass matrix may have an 'anarchical' structure with random values of elements or it may have some symmetry that differs from the TBM symmetry. Interesting examples include matrices with texture zeros, matrices with certain 'flavor alignment' as well as hierarchical matrices with a two-component structure, where the dominant and subdominant contributions have different symmetries. This opens up new approaches to understanding the lepton mixing.

  8. Cutaneous mixed infections in AIDS.

    PubMed

    Piérard, G E; Piérard-Franchimont, C; Estrada, J A; Rurangirwa, A; Dosal, F L

    1990-02-01

    We report a new case of mixed infection occurring at the same site of the skin in a human immune deficiency virus-positive patient. Hyperkeratotic and crusted erosions contained fusospirochetal organisms, Cryptococcus neoformans, and another unidentified fungus.

  9. Mixed-mu superconducting bearings

    DOEpatents

    Hull, John R.; Mulcahy, Thomas M.

    1998-01-01

    A mixed-mu superconducting bearing including a ferrite structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet structure. The ferrite structure is levitated by said stationary permanent magnet structure.

  10. Mixed-mu superconducting bearings

    DOEpatents

    Hull, J.R.; Mulcahy, T.M.

    1998-03-03

    A mixed-mu superconducting bearing is disclosed including a ferrite structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet structure. The ferrite structure is levitated by said stationary permanent magnet structure. 9 figs.

  11. Mixed jamming method for SAR

    NASA Astrophysics Data System (ADS)

    Zhao, Hong-feng; Zhang, Peng; Wang, Yong-sheng

    2007-11-01

    The mixed jamming method of synthetic aperture radar is analyzed and discussed. The methods of active noise and deception jamming and the signal model of transmitting is described. The raw echo signal of SAR and the model of jammed echo signal are expatiated, the characteristic of SAR and the evaluating method of jamming effect are established. Finally, the mixed jamming imaging of SAR is simulated.

  12. Dysphoric mania, mixed states, and mania with mixed features specifier: are we mixing things up?

    PubMed

    McElroy, Susan L; Keck, Paul E

    2016-11-21

    Various terms have been used to describe mania when it is accompanied by depressive symptoms. In this article, we attempt to define and discuss 3 of these terms: dysphoric mania, mixed state, and mania with mixed features specifier. We conclude that whatever term is used, it is important to be aware that mania is more often unpleasant than pleasant, and that the unpleasantness is not limited to depression.

  13. Turbulent mix experiments and simulations

    SciTech Connect

    Dimonte, G.; Schneider, M.; Frerking, C.E.

    1995-08-01

    Hydrodynamic instabilities produce material mixing that can significantly degrade weapons performance. We investigate the Richtmyer-Meshkov (RM) and Rayleigh-Taylor (RT) instabilities in the turbulent regime in two experimental venues. RM experiments are conducted on the Nova laser with strong radiatively driven shocks (Mach > 20) in planar, two fluid targets. Interfacial perturbations are imposed with single sinusoidal modes to test linear theory and with three dimensional (3D) random modes to produce turbulent mix. RT experiments are conducted on a new facility, the Linear Electric Motor (LEM), in which macroscopic fluids are accelerated with arbitrary temporal profiles. This allows detailed diagnosis of the turbulence over a wide range of conditions. The Nova experiments study the high compression regime whereas the LEM experiments are incompressible. The results are compared to hydrodynamic simulations with the arbitrary Lagrangian-Eulerian code (CALE). The goal is to develop and test engineering models of mix.

  14. Ion mixing of semiconductor superlattices

    NASA Astrophysics Data System (ADS)

    Xia, W.; Hsu, S. N.; Han, C. C.; Pappert, S. A.; Zhu, B.; Cozzolino, C.; Yu, P. K. L.; Lau, S. S.; Poker, D. B.; White, C. W.; Schwarz, S. A.

    1991-07-01

    Compositional disordering of III-V compound superlattice structures has received considerable attention recently due to its potential application for photonic devices. The conventional method to induce compositional disorder is to implant a moderate dose of impurity ions (˜ 10 15 cm -2) into the structure at room temperature, followed by a high-temperature annealing step (this process is referred to as IA here). Ion irradiation at room temperature alone does not cause any significant intermixing of layers. The subsequent high-temperature annealing step tends to restrict device processing flexibility. Ion mixing (IM) is capable of enhancing compositional disordering of layers at a rate which increases exponentially with the ion irradiation temperature. As a processing technique to planarize devices, ion mixing appears to be an attractive technology. In this work, we investigate compositional disordering in the AlGaAs/GaAs and the InGaAs/InP systems using ion mixing. We found that the ion mixing behavior of these two systems shows a thermally activated regime as well as an athermal regime, similar to that observed for metal-metal and metal-semiconductor systems. Ion mixing is observed to induce compositional disordering at significantly lower temperatures than that for the IA process. We have compared the two processes in terms of four parameters (1) irradiation temperature, (2) dose dependence, (3) annealing, and (4) electrically active ions. We found that the IM process is more efficient in utilizing the defects generated by ion irradiation to cause disordering. Both the physical mechanism of ion mixing and possible device implications will be discussed.

  15. Ion mixing of semiconductor superlattices

    NASA Astrophysics Data System (ADS)

    Xia, W.; Hsu, S. N.; Han, C. C.; Pappert, S. A.; Zhu, B.; Cozzolino, C.; Yu, P. K. L.; Lau, S. S.; Poker, D. B.; White, C. W.

    Compositional disordering of III-V compound superlattice structures has received considerable attention recently due to its potential application for photonic devices. The conventional method in induce compositional disorder is to implant a moderate dose of impurity ions (approx. 10 (exp 15)/sq cm) into the structure at room temperature, followed by a high temperature annealing step (this process is referred to as IA here). Ion irradiation at room temperature alone does not cause any significant intermixing of layers. The subsequent high temperature annealing step tends to restrict device processing flexibility. Ion mixing (IM) is capable of enhancing compositional disordering of layers at a rate which increases exponentially with the ion irradiation temperature. As a processing technique to planarize devices, ion mixing appears to be an attractive technology. Compositional disordering was studied disordering in the AlGaAs/GaAs and the InGaAs/InP systems using ion mixing. It was found that the ion mixing behavior of these two systems shows a thermally activated regime as well as an athermal regime, similar to that observed for metal-metal and metal-semiconductor systems. Ion mixing is observed to induce compositional disordering at significantly lower temperatures than that for the IA process. The two processes were compared in terms of five parameters (1) irradiation temperature, (2) dose dependence (3) annealing, and (4) electrically active ions. It was found that the IM process is more efficient in utilizing the defects generated by ion irradiation to cause disordering. Both the physical mechanism of ion mixing and possible device implications will be discussed.

  16. Further evidence for mixed emotions.

    PubMed

    Larsen, Jeff T; McGraw, A Peter

    2011-06-01

    Emotion theorists have long debated whether valence, which ranges from pleasant to unpleasant states, is an irreducible aspect of the experience of emotion or whether positivity and negativity are separable in experience. If valence is irreducible, it follows that people cannot feel happy and sad at the same time. Conversely, if positivity and negativity are separable, people may be able to experience such mixed emotions. The authors tested several alternative interpretations for prior evidence that happiness and sadness can co-occur in bittersweet situations (i.e., those containing both pleasant and unpleasant aspects). One possibility is that subjects who reported mixed emotions merely vacillated between happiness and sadness. The authors tested this hypothesis in Studies 1-3 by asking subjects to complete online continuous measures of happiness and sadness. Subjects reported more simultaneously mixed emotions during a bittersweet film clip than during a control clip. Another possibility is that subjects in earlier studies reported mixed emotions only because they were explicitly asked whether they felt happy and sad. The authors tested this hypothesis in Studies 4-6 with open-ended measures of emotion. Subjects were more likely to report mixed emotions after the bittersweet clip than the control clip. Both patterns occurred even when subjects were told that they were not expected to report mixed emotions (Studies 2 and 5) and among subjects who did not previously believe that people could simultaneously feel happy and sad (Studies 3 and 6). These results provide further evidence that positivity and negativity are separable in experience.

  17. Mixing in Magnetized Turbulent Media

    NASA Astrophysics Data System (ADS)

    Sur, Sharanya; Pan, Liubin; Scannapieco, Evan

    2014-04-01

    Turbulent motions are essential to the mixing of entrained fluids and are also capable of amplifying weak initial magnetic fields by small-scale dynamo action. Here we perform a systematic study of turbulent mixing in magnetized media, using three-dimensional magnetohydrodynamic simulations that include a scalar concentration field. We focus on how mixing depends on the magnetic Prandtl number, Pm, from 1 to 4 and the Mach number, { {M}}, from 0.3 to 2.4. For all subsonic flows, we find that the velocity power spectrum has a k -5/3 slope in the early kinematic phase, but steepens due to magnetic back reactions as the field saturates. The scalar power spectrum, on the other hand, flattens compared to k -5/3 at late times, consistent with the Obukohov-Corrsin picture of mixing as a cascade process. At higher Mach numbers, the velocity power spectrum also steepens due to the presence of shocks, and the scalar power spectrum again flattens accordingly. Scalar structures are more intermittent than velocity structures in subsonic turbulence, whereas for supersonic turbulence, velocity structures appear more intermittent than the scalars only in the kinematic phase. Independent of the Mach number of the flow, scalar structures are arranged in sheets in both the kinematic and saturated phases of the magnetic field evolution. For subsonic turbulence, scalar dissipation is hindered in the strong magnetic field regions, probably due to Lorentz forces suppressing the buildup of scalar gradients, whereas for supersonic turbulence, scalar dissipation increases monotonically with increasing magnetic field strength. At all Mach numbers, mixing is significantly slowed by the presence of dynamically important small-scale magnetic fields, implying that mixing in the interstellar medium and in galaxy clusters is less efficient than modeled in hydrodynamic simulations.

  18. Nonideal Rayleigh-Taylor mixing

    SciTech Connect

    Sharp, David Howland; Lin, Hyun K; Iwerks, Justin G; Gliman, James G

    2009-01-01

    Rayleigh-Taylor mixing is a classical hydrodynamic Instability, which occurs when a light fluid pushes against a heavy fluid. The two main sources of nonideal behavior in Rayleigh-Taylor (RT) mixing are regularizations (physical and numerical) which produce deviations from a pure Euler equation, scale Invariant formulation, and non Ideal (i.e. experimental) initial conditions. The Kolmogorov theory of turbulence predicts stirring at all length scales for the Euler fluid equations without regularization. We Interpret mathematical theories of existence and non-uniqueness in this context, and we provide numerical evidence for dependence of the RT mixing rate on nonideal regularizations, in other words indeterminacy when modeled by Euler equations. Operationally, indeterminacy shows up as non unique solutions for RT mixing, parametrized by Schmidt and Prandtl numbers, In the large Reynolds number (Euler equation) limit. Verification and validation evidence is presented for the large eddy simulation algorithm used here. Mesh convergence depends on breaking the nonuniqueness with explicit use of the laminar Schmidt and PrandtJ numbers and their turbulent counterparts, defined in terms of subgrid scale models. The dependence of the mixing rate on the Schmidt and Prandtl numbers and other physical parameters will be illustrated. We demonstrate numerically the influence of initial conditions on the mixing rate. Both the dominant short wavelength Initial conditions and long wavelength perturbations are observed to playa role. By examination of two classes of experiments, we observe the absence of a single universal explanation, with long and short wavelength initial conditions, and the various physical and numerical regularizations contributing In different proportions In these two different contexts.

  19. Mixe de Tlahuitoltepec, Oaxaca (Mixe of Tlahuitoltepec, Oaxaca).

    ERIC Educational Resources Information Center

    Mexico Coll. (Mexico City)

    This document is one of 17 volumes on indigenous Mexican languages and is the result of a project undertaken by the Archivo de Lenguas Indigenas de Mexico. This volume contains information on Mixe, an indigenous language of Mexico spoken in Tlahuitoltepec, in the state of Oaxaca. The objective of collecting such a representative sampling of the…

  20. Use and abuse of mixing models (MixSIAR)

    EPA Science Inventory

    Background/Question/MethodsCharacterizing trophic links in food webs is a fundamental ecological question. In our efforts to quantify energy flow through food webs, ecologists have increasingly used mixing models to analyze biological tracer data, often from stable isotopes. Whil...

  1. Mixed ternary heterojunction solar cell

    DOEpatents

    Chen, Wen S.; Stewart, John M.

    1992-08-25

    A thin film heterojunction solar cell and a method of making it has a p-type layer of mixed ternary I-III-VI.sub.2 semiconductor material in contact with an n-type layer of mixed binary II-VI semiconductor material. The p-type semiconductor material includes a low resistivity copper-rich region adjacent the back metal contact of the cell and a composition gradient providing a minority carrier mirror that improves the photovoltaic performance of the cell. The p-type semiconductor material preferably is CuInGaSe.sub.2 or CuIn(SSe).sub.2.

  2. Polarization mixing optical parametric oscillator.

    SciTech Connect

    Pearl, Shaul; Smith, Arlee Virgil; Arie, Ady; Blau, Pinhas; Kalmani, Gal

    2005-05-01

    We report the experimental realization of a new type of optical parametric oscillator in which oscillation is achieved by polarization rotation in a linear retarder, followed by nonlinear polarization mixing. The mixing is performed by a type II degenerate parametric downconversion in a periodically poled KTP crystal pumped by a 1064 nm pulsed Nd:YAG pump. A single, linearly polarized beam, precisely at the degenerate wavelength is generated. The output spectrum has a narrow linewidth (below the instrumentation bandwidth of 1 nm) and is highly stable with respect to variations in the crystal temperature.

  3. Bs Mixing at the Tevatron

    SciTech Connect

    Gomez-Ceballos, Guillelmo; /Cantabria Inst. of Phys.

    2006-04-01

    The Tevatron collider at Fermilab provides a very rich environment for the study of B{sub s} mesons. B{sub s} Mixing is the most important analysis within the B Physics program of both experiments. In this paper they summarize the most recent results on this topic from both D0 and CDF experiments. There were very important updates in both experiments after his last talk, hence the organizers warmly recommended me to include the latest available results on B{sub s} mixing, instead of what he presents there.

  4. On the quantification of mixing in microfluidics.

    PubMed

    Hashmi, Ali; Xu, Jie

    2014-10-01

    Methods for quantifying mixing in microfluidics have varied largely in the past, and various indices have been employed to represent the extent of mixing. Mixing between two or more colored liquids is usually quantified using simple mathematical functions operated over a sequence of images. The function, usually termed mixing indices, involves a measure of standard deviation. Here, we first review some mixing indices and then experimentally verify the index most representative of a mixing event. It is observed that the relative mixing index is not affected by the lighting conditions, unlike other known mixing indices. Based on this finding, the use of a relative mixing index is advocated for further use in the lab-on-a-chip community for quantifying mixing events.

  5. Colour Mixing Based on Daylight

    ERIC Educational Resources Information Center

    Meyn, Jan-Peter

    2008-01-01

    Colour science is based on the sensation of monochromatic light. In contrast to that, surface colours are caused by reflection of wide sections of the daylight spectrum. Non-spectral colours like magenta and purple appear homologous to colours with spectral hue, if the approach of mixing monochromatic light is abandoned. It is shown that a large…

  6. Advances in compressible turbulent mixing

    SciTech Connect

    Dannevik, W.P.; Buckingham, A.C.; Leith, C.E.

    1992-01-01

    This volume includes some recent additions to original material prepared for the Princeton International Workshop on the Physics of Compressible Turbulent Mixing, held in 1988. Workshop participants were asked to emphasize the physics of the compressible mixing process rather than measurement techniques or computational methods. Actual experimental results and their meaning were given precedence over discussions of new diagnostic developments. Theoretical interpretations and understanding were stressed rather than the exposition of new analytical model developments or advances in numerical procedures. By design, compressibility influences on turbulent mixing were discussed--almost exclusively--from the perspective of supersonic flow field studies. The papers are arranged in three topical categories: Foundations, Vortical Domination, and Strongly Coupled Compressibility. The Foundations category is a collection of seminal studies that connect current study in compressible turbulent mixing with compressible, high-speed turbulent flow research that almost vanished about two decades ago. A number of contributions are included on flow instability initiation, evolution, and transition between the states of unstable flow onset through those descriptive of fully developed turbulence. The Vortical Domination category includes theoretical and experimental studies of coherent structures, vortex pairing, vortex-dynamics-influenced pressure focusing. In the Strongly Coupled Compressibility category the organizers included the high-speed turbulent flow investigations in which the interaction of shock waves could be considered an important source for production of new turbulence or for the enhancement of pre-existing turbulence. Individual papers are processed separately.

  7. Mixing and transport. [Water pollution

    SciTech Connect

    Roberts, P.J.W.

    1982-06-01

    The mixing and transport of water pollution is the subject of this literature review with 110 references. The environmental transport of pollutants is examined in streams, rivers, reservoirs, ponds, estuaries, salt marshes and coastal waters. The dynamics of fluid flow, and the physical properties of jets, plumes, and stratified fluids are discussed. (KRM)

  8. Turbulent Mixing Chemistry in Disks

    NASA Astrophysics Data System (ADS)

    Semenov, D.; Wiebe, D.

    2006-11-01

    A gas-grain chemical model with surface reaction and 1D/2D turbulent mixing is available for protoplanetary disks and molecular clouds. Current version is based on the updated UMIST'95 database with gas-grain interactions (accretion, desorption, photoevaporation, etc.) and modified rate equation approach to surface chemistry (see also abstract for the static chemistry code).

  9. Racially Mixed People in America.

    ERIC Educational Resources Information Center

    Root, Maria P. P., Ed.

    This book offers a comprehensive look at the social and psychological adjustment of multiracial people, models for identity development, contemporary immigration and marriage patterns, and methodological issues involved in conducting research with mixed-race people, all in the context of America's multiracial past and present. The following 26…

  10. Bayesian stable isotope mixing models

    EPA Science Inventory

    In this paper we review recent advances in Stable Isotope Mixing Models (SIMMs) and place them into an over-arching Bayesian statistical framework which allows for several useful extensions. SIMMs are used to quantify the proportional contributions of various sources to a mixtur...

  11. Simple rheology of mixed proteins

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Mixing different proteins to form strong gel networks for food applications may create synergistic increases in viscoelasticity that cannot be achieved with a single protein. In this study, small amplitude oscillatory shear analyses were used to investigate the rheology of calcium caseinate (CC), e...

  12. Mixing It Up with Acrylics.

    ERIC Educational Resources Information Center

    Laird, Shirley

    1999-01-01

    Presents an art activity for fifth-grade students in which they learn about basic shapes and what happens when shapes overlap, draw seven overlapping geometric shapes, review the use of acrylic paint and mixing colors, and finally paint with primary colors. (CMK)

  13. Towards understanding turbulent scalar mixing

    NASA Technical Reports Server (NTRS)

    Girimaji, Sharath S.

    1992-01-01

    In an effort towards understanding turbulent scalar mixing, we study the effect of molecular mixing, first in isolation and then by accounting for the effects of the velocity field. The chief motivation for this approach stems from the strong resemblance of the scalar probability density function (PDF) obtained from the scalar field evolving from the heat conduction equation that arises in a turbulent velocity field. However, the evolution of the scalar dissipation is different for the two cases. We attempt to account for these differences, which are due to the velocity field, using a Lagrangian frame analysis. After establishing the usefulness of this approach, we use the heat-conduction simulations (HCS), in lieu of the more expensive direct numerical simulations (DNS), to study many of the less understood aspects of turbulent mixing. Comparison between the HCS data and available models are made whenever possible. It is established that the beta PDF characterizes the evolution of the scalar PDF during mixing from all types of non-premixed initial conditions.

  14. Reductant injection and mixing system

    SciTech Connect

    Reeves, Matt; Henry, Cary A.; Ruth, Michael J.

    2016-02-16

    A gaseous reductant injection and mixing system is described herein. The system includes an injector for injecting a gaseous reductant into an exhaust gas stream, and a mixer attached to a surface of the injector. The injector includes a plurality of apertures through which the gaseous reductant is injected into an exhaust gas stream. The mixer includes a plurality of fluid deflecting elements.

  15. Bilarge neutrino mixing and the Cabibbo angle

    NASA Astrophysics Data System (ADS)

    Boucenna, S. M.; Morisi, S.; Tórtola, M.; Valle, J. W. F.

    2012-09-01

    Recent measurements of the neutrino mixing angles cast doubt on the validity of the so-far popular tribimaximal mixing Ansatz. We propose a parametrization for the neutrino mixing matrix where the reactor angle seeds the large solar and atmospheric mixing angles, equal to each other in first approximation. We suggest such a bilarge mixing pattern as a model-building standard, realized when the leading order value of θ13 equals the Cabibbo angle λC.

  16. A mixed relaxed clock model

    PubMed Central

    2016-01-01

    Over recent years, several alternative relaxed clock models have been proposed in the context of Bayesian dating. These models fall in two distinct categories: uncorrelated and autocorrelated across branches. The choice between these two classes of relaxed clocks is still an open question. More fundamentally, the true process of rate variation may have both long-term trends and short-term fluctuations, suggesting that more sophisticated clock models unfolding over multiple time scales should ultimately be developed. Here, a mixed relaxed clock model is introduced, which can be mechanistically interpreted as a rate variation process undergoing short-term fluctuations on the top of Brownian long-term trends. Statistically, this mixed clock represents an alternative solution to the problem of choosing between autocorrelated and uncorrelated relaxed clocks, by proposing instead to combine their respective merits. Fitting this model on a dataset of 105 placental mammals, using both node-dating and tip-dating approaches, suggests that the two pure clocks, Brownian and white noise, are rejected in favour of a mixed model with approximately equal contributions for its uncorrelated and autocorrelated components. The tip-dating analysis is particularly sensitive to the choice of the relaxed clock model. In this context, the classical pure Brownian relaxed clock appears to be overly rigid, leading to biases in divergence time estimation. By contrast, the use of a mixed clock leads to more recent and more reasonable estimates for the crown ages of placental orders and superorders. Altogether, the mixed clock introduced here represents a first step towards empirically more adequate models of the patterns of rate variation across phylogenetic trees. This article is part of the themed issue ‘Dating species divergences using rocks and clocks’. PMID:27325829

  17. A mixed relaxed clock model.

    PubMed

    Lartillot, Nicolas; Phillips, Matthew J; Ronquist, Fredrik

    2016-07-19

    Over recent years, several alternative relaxed clock models have been proposed in the context of Bayesian dating. These models fall in two distinct categories: uncorrelated and autocorrelated across branches. The choice between these two classes of relaxed clocks is still an open question. More fundamentally, the true process of rate variation may have both long-term trends and short-term fluctuations, suggesting that more sophisticated clock models unfolding over multiple time scales should ultimately be developed. Here, a mixed relaxed clock model is introduced, which can be mechanistically interpreted as a rate variation process undergoing short-term fluctuations on the top of Brownian long-term trends. Statistically, this mixed clock represents an alternative solution to the problem of choosing between autocorrelated and uncorrelated relaxed clocks, by proposing instead to combine their respective merits. Fitting this model on a dataset of 105 placental mammals, using both node-dating and tip-dating approaches, suggests that the two pure clocks, Brownian and white noise, are rejected in favour of a mixed model with approximately equal contributions for its uncorrelated and autocorrelated components. The tip-dating analysis is particularly sensitive to the choice of the relaxed clock model. In this context, the classical pure Brownian relaxed clock appears to be overly rigid, leading to biases in divergence time estimation. By contrast, the use of a mixed clock leads to more recent and more reasonable estimates for the crown ages of placental orders and superorders. Altogether, the mixed clock introduced here represents a first step towards empirically more adequate models of the patterns of rate variation across phylogenetic trees.This article is part of the themed issue 'Dating species divergences using rocks and clocks'.

  18. 40 CFR 721.4390 - Trisubstituted hydroquinone diester.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... program. Requirements as specified in § 721.72 (a), (b), (c), (d), (f), (g)(3)(i), (g)(3)(ii), (g)(4)(i), and (g)(5). (ii) Release to water. Requirements as specified in § 721.90 (a)(4), (b)(4) (where N = 30 ppb). (b) Specific requirements. The provisions of subpart A of this part apply to this section...

  19. Sensor activity and logic behaviour of PET based dihydroimidazonaphthalimide diester

    NASA Astrophysics Data System (ADS)

    Georgiev, Nikolai I.; Lyulev, Mihail P.; Bojinov, Vladimir B.

    2012-11-01

    An ester terminated dihydroimidazonaphthalimide as multi-functional logic device is presented. Due to the optical changes as a function of pH this simple molecule is able to act as a molecular pH metre, a digital comparator and a half-adder. It was demonstrated that the dihydroimidazonaphthalimide comparator could be used as a fundamental element of an optical device for control of pH windows. Also, the ability of the device to detect metal ions in DMF and in water/DMF (3:1, v/v) at different pHs has been evaluated by monitoring the changes of its fluorescence intensity. Among the tested metal ions (Cd2+, Co2+, Cu2+, Fe3+, Ni2+, Pb2+, Zn2+, Bi3+, Hg2+ and Ag+) only Fe3+ and Bi3+ were efficiently detected. In water/DMF (3:1, v/v) XOR and XNOR logic gates are presented using pH and Fe3+ as chemical inputs based on encoding binary digits of logical conventions.

  20. Sensor activity and logic behaviour of PET based dihydroimidazonaphthalimide diester.

    PubMed

    Georgiev, Nikolai I; Lyulev, Mihail P; Bojinov, Vladimir B

    2012-11-01

    An ester terminated dihydroimidazonaphthalimide as multi-functional logic device is presented. Due to the optical changes as a function of pH this simple molecule is able to act as a molecular pH metre, a digital comparator and a half-adder. It was demonstrated that the dihydroimidazonaphthalimide comparator could be used as a fundamental element of an optical device for control of pH windows. Also, the ability of the device to detect metal ions in DMF and in water/DMF (3:1, v/v) at different pHs has been evaluated by monitoring the changes of its fluorescence intensity. Among the tested metal ions (Cd(2+), Co(2+), Cu(2+), Fe(3+), Ni(2+), Pb(2+), Zn(2+), Bi(3+), Hg(2+) and Ag(+)) only Fe(3+) and Bi(3+) were efficiently detected. In water/DMF (3:1, v/v) XOR and XNOR logic gates are presented using pH and Fe(3+) as chemical inputs based on encoding binary digits of logical conventions.

  1. Tumor promoting phorbol diesters: substrates for diacylglycerol lipase

    SciTech Connect

    Cabot, M.C.

    1984-08-30

    Enzyme activity in rat serum was examined utilizing the potent tumor promoter 12-O-tetradecanoylphorbol-13-acetate (TPA) and various glycerolipids as substrates. The serum activity was specific for hydrolysis of the long chain tetradecanoate moiety of TPA, hydrolyzed mono- and diacylglycerols, but was not effective against triacylglycerols, cholesterylesters, or phospholipids. Heating the enzyme preparation at 56/sup 0/C for 1 min was dually effective in reducing the hydrolysis of both TPA and dioleoylglycerol by 83-86% of control levels. The potent diacylglycerol lipase inhibitor, RHC 80267, inhibited the hydrolysis of TPA in the 0.2-1.0 ..mu..M range and was also a potent blocker of monoacyl- and diacylglycerol hydrolysis. In substrate competition studies, exogenous unlabeled TPA was added to the (/sup 14/C)dioleoylglycerol-containing reaction mixture, however, this produced an approximate 3-fold stimulation of (/sup 14/)dioleoylglycerol hydrolysis. Although we have not established whether the hydrolysis of TPA and diacylglycerol is the work of one enzyme, the effectiveness of the specific lipase inhibitor, RHC 80267, demonstrates that diacylglycerol lipase can utilize TPA as substrate, a finding never before documented. This point is of interest in light of the theory that phorbol esters act by mimicry of the natural lipid mediator, diacylglycerols. 44 references, 3 figures, 1 table.

  2. Chemoselective Intramolecular Carbonyl Ylide Formation through Electronically Differentiated Malonate Diesters.

    PubMed

    Nakhla, Mina C; Lee, Che-Wah; Wood, John L

    2015-12-04

    A method for chemoselective carbonyl ylide formation utilizing the Rh(II) catalyzed decomposition of electronically differentiated diazo malonates is disclosed. Treatment of ethyl, trifluoro ethyl diazo malonate with a Rh(II) catalyst selectively forms a carbonyl ylide from the relatively electron rich ethyl ester. This carbonyl ylide can be trapped by various alkynes giving highly functionalized oxabicyclic compounds in a chemo-, regio-, and diastereoselective fashion.

  3. Mixed methods research in mental health nursing.

    PubMed

    Kettles, A M; Creswell, J W; Zhang, W

    2011-08-01

    Mixed methods research is becoming more widely used in order to answer research questions and to investigate research problems in mental health and psychiatric nursing. However, two separate literature searches, one in Scotland and one in the USA, revealed that few mental health nursing studies identified mixed methods research in their titles. Many studies used the term 'embedded' but few studies identified in the literature were mixed methods embedded studies. The history, philosophical underpinnings, definition, types of mixed methods research and associated pragmatism are discussed, as well as the need for mixed methods research. Examples of mental health nursing mixed methods research are used to illustrate the different types of mixed methods: convergent parallel, embedded, explanatory and exploratory in their sequential and concurrent combinations. Implementing mixed methods research is also discussed briefly and the problem of identifying mixed methods research in mental and psychiatric nursing are discussed with some possible solutions to the problem proposed.

  4. HETEROGENEOUS REBURNING BY MIXED FUELS

    SciTech Connect

    Wei-Yin Chen; Benson B. Gathitu

    2005-01-14

    Recent studies of heterogeneous reburning, i.e., reburning involving a coal-derived char, have elucidated its variables, kinetics and mechanisms that are valuable to the development of a highly efficient reburning process. Young lignite chars contain catalysts that not only reduce NO, but they also reduce HCN that is an important intermediate that recycles to NO in the burnout zone. Gaseous CO scavenges the surface oxides that are formed during NO reduction, regenerating the active sites on the char surface. Based on this mechanistic information, cost-effective mixed fuels containing these multiple features has been designed and tested in a simulated reburning apparatus. Remarkably high reduction of NO and HCN has been observed and it is anticipated that mixed fuel will remove 85% of NO in a three-stage reburning process.

  5. Topological mixing with ghost rods

    NASA Astrophysics Data System (ADS)

    Gouillart, Emmanuelle; Thiffeault, Jean-Luc; Finn, Matthew D.

    2006-03-01

    Topological chaos relies on the periodic motion of obstacles in a two-dimensional flow in order to form nontrivial braids. This motion generates exponential stretching of material lines, and hence efficient mixing. Boyland, Aref, and Stremler [J. Fluid Mech. 403, 277 (2000)] have studied a specific periodic motion of rods that exhibits topological chaos in a viscous fluid. We show that it is possible to extend their work to cases where the motion of the stirring rods is topologically trivial by considering the dynamics of special periodic points that we call “ghost rods”, because they play a similar role to stirring rods. The ghost rods framework provides a new technique for quantifying chaos and gives insight into the mechanisms that produce chaos and mixing. Numerical simulations for Stokes flow support our results.

  6. Topological mixing with ghost rods.

    PubMed

    Gouillart, Emmanuelle; Thiffeault, Jean-Luc; Finn, Matthew D

    2006-03-01

    Topological chaos relies on the periodic motion of obstacles in a two-dimensional flow in order to form nontrivial braids. This motion generates exponential stretching of material lines, and hence efficient mixing. Boyland, Aref, and Stremler [J. Fluid Mech. 403, 277 (2000)] have studied a specific periodic motion of rods that exhibits topological chaos in a viscous fluid. We show that it is possible to extend their work to cases where the motion of the stirring rods is topologically trivial by considering the dynamics of special periodic points that we call "ghost rods", because they play a similar role to stirring rods. The ghost rods framework provides a new technique for quantifying chaos and gives insight into the mechanisms that produce chaos and mixing. Numerical simulations for Stokes flow support our results.

  7. Pediatric Mixed Connective Tissue Disease.

    PubMed

    Berard, Roberta A; Laxer, Ronald M

    2016-05-01

    Pediatric-onset mixed connective tissue disease is among the rare disease entities in pediatric rheumatology and includes features of arthritis, polymyositis/dermatomyositis, systemic lupus erythematosus, and systemic sclerosis. Accurate recognition and diagnosis of the disease is paramount to prevent long-term morbidity. Advances in the genetic and immunologic understanding of the factors involved in the etiopathogenesis provide an opportunity for improvements in prognostication and targeted therapy. The development of a multinational cohort of patients with mixed connective tissue disease would be invaluable to provide more updated data regarding the clinical presentation, to develop a standardized treatment approach, disease activity and outcome tools, and to provide data on long-term outcomes and comorbidities.

  8. Kinetic mixing at strong coupling

    NASA Astrophysics Data System (ADS)

    Del Zotto, Michele; Heckman, Jonathan J.; Kumar, Piyush; Malekian, Arada; Wecht, Brian

    2017-01-01

    A common feature of many string-motivated particle physics models is additional strongly coupled U (1 )'s. In such sectors, electric and magnetic states have comparable mass, and integrating out modes also charged under U (1 ) hypercharge generically yields C P preserving electric kinetic mixing and C P violating magnetic kinetic mixing terms. Even though these extra sectors are strongly coupled, we show that in the limit where the extra sector has approximate N =2 supersymmetry, we can use formal methods from Seiberg-Witten theory to compute these couplings. We also calculate various quantities of phenomenological interest such as the cross section for scattering between visible sector states and heavy extra sector states as well as the effects of supersymmetry breaking induced from coupling to the minimal supersymmetric Standard Model.

  9. Heterogeneous Reburning By Mixed Fuels

    SciTech Connect

    Anderson Hall

    2009-03-31

    Recent studies of heterogeneous reburning, i.e., reburning involving a coal-derived char, have elucidated its variables, kinetics and mechanisms that are valuable to the development of a highly efficient reburning process. Young lignite chars contain catalysts that not only reduce NO, but they also reduce HCN that is an important intermediate that recycles to NO in the burnout zone. Gaseous CO scavenges the surface oxides that are formed during NO reduction, regenerating the active sites on the char surface. Based on this mechanistic information, cost-effective mixed fuels containing these multiple features has been designed and tested in a simulated reburning apparatus. Remarkably high reduction of NO and HCN has been observed and it is anticipated that mixed fuel will remove 85% of NO in a three-stage reburning process.

  10. Lidar for Lateral Mixing (LATMIX)

    DTIC Science & Technology

    2013-09-30

    km, i.e., the “ submesoscale ”. We aim to understand the underlying mechanisms and forcing, as well as the temporal, spatial, and scale variability of...the overall objectives of the Lateral Mixing DRI to try to determine the extent to which submesoscale stirring is driven by a cascade of energy down...technical goal of our work is to develop the use of airborne LIDAR surveys of evolving dye experiments as a tool for studying submesoscale lateral dispersion

  11. MISO - Mixed Integer Surrogate Optimization

    SciTech Connect

    Mueller, Juliane

    2016-01-20

    MISO is an optimization framework for solving computationally expensive mixed-integer, black-box, global optimization problems. MISO uses surrogate models to approximate the computationally expensive objective function. Hence, derivative information, which is generally unavailable for black-box simulation objective functions, is not needed. MISO allows the user to choose the initial experimental design strategy, the type of surrogate model, and the sampling strategy.

  12. Mixed real/complex factorization

    SciTech Connect

    Lima, L.T.G. . Dept. of Electrical Engineering); Martines, N.; Pinto, H.J.C.P. . Centro de Pesquisas de Energia Electrica)

    1993-02-01

    This paper describes a mixed real/complex sparse matrix factorization and solution scheme applied to a large matrix problem. Large system eigenanalysis and frequency domain methods will directly benefit from the proposed scheme, which can reduce both memory and CPU time requirements when compared to conventional complex-only solutions. The application in hand is the small signal electromechanical stability analysis of large power systems. The savings obtained are significant considering the CPU intensive nature of these matrix problems.

  13. Mixing in the solar tachocline

    NASA Astrophysics Data System (ADS)

    Brun, Allan Sacha

    We conduct numerical simulations of updated solar models including a physical treatment of the tachocline (Spiegel & Zahn 1992), the rotational transition layer localized at the base of the solar convection zone. We first describe what is the current understanding of this thin shear layer. We then show that we improve substantially the agreement between the models and the observed Sun by taking into account the macroscopic mixing occurring within this region.

  14. Coastal and Near Surface Mixing

    DTIC Science & Technology

    2016-06-07

    The challenge is to measure the mixing directly without relying on models and assumptions about the nature of turbulence. Sound is backscattered...turbulence vary considerably. The towed vehicle (Fig. 1) carries high-resolution velocity and temperature sensors (shear probes and thermistors), current...meters, a vertical array of three pairs of salinity and temperature sensors, and motion sensors. These sensors provide a measure of the density

  15. Mixed Alcohol Synthesis Catalyst Screening

    SciTech Connect

    Gerber, Mark A.; White, James F.; Stevens, Don J.

    2007-09-03

    National Renewable Energy Laboratory (NREL) and Pacific Northwest National Laboratory (PNNL) are conducting research to investigate the feasibility of producing mixed alcohols from biomass-derived synthesis gas (syngas). PNNL is tasked with obtaining commercially available or preparing promising mixed-alcohol catalysts and screening them in a laboratory-scale reactor system. Commercially available catalysts and the most promising experimental catalysts are provided to NREL for testing using a slipstream from a pilot-scale biomass gasifier. From the standpoint of producing C2+ alcohols as the major product, it appears that the rhodium catalyst is the best choice in terms of both selectivity and space-time yield (STY). However, unless the rhodium catalyst can be improved to provide minimally acceptable STYs for commercial operation, mixed alcohol synthesis will involve significant production of other liquid coproducts. The modified Fischer-Tropsch catalyst shows the most promise for providing both an acceptable selectivity to C2+ alcohols and total liquid STY. However, further optimization of the Fischer-Tropsch catalysts to improve selectivity to higher alcohols is highly desired. Selection of a preferred catalyst will likely entail a decision on the preferred coproduct slate. No other catalysts tested appear amenable to the significant improvements needed for acceptable STYs.

  16. Assessing mixed waste treatment technologies

    SciTech Connect

    Berry, J.B.; Bloom, G.A.; Hart, P.W.

    1994-06-01

    The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). As discussed earlier in this conference MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. During the next 5 years, DOE will manage over 1,200,000 m{sup 3} of MLLW and mixed transuranic (MTRU) waste at 50 sites in 22 states (see Table 1). The difference between MLLW and MTRU waste is in the concentration of elements that have a higher atomic weight than uranium. Nearly all of this waste will be located at 13 sites. More than 1400 individual mixed waste streams exist with different chemical and physical matrices containing a wide range of both hazardous and radioactive contaminants. Their containment and packaging vary widely (e.g., drums, bins, boxes, and buried waste). This heterogeneity in both packaging and waste stream constituents makes characterization difficult, which results in costly sampling and analytical procedures and increased risk to workers.

  17. Ion mixing and phase diagrams

    NASA Astrophysics Data System (ADS)

    Lau, S. S.; Liu, B. X.; Nicolet, M.-A.

    1983-05-01

    Interactions induced by ion irradiation are generally considered to be non-equilibrium processes, whereas phase diagrams are determined by phase equilibria. These two entities are seemingly unrelated. However, if one assumes that quasi-equilibrium conditions prevail after the prompt events, subsequent reactions are driven toward equilibrium by thermodynamical forces. Under this assumption, ion-induced reactions are related to equilibrium and therefore to phase diagrams. This relationship can be seen in the similarity that exists in thin films between reactions induced by ion irradiation and reactions induced by thermal annealing. In the latter case, phase diagrams have been used to predict the phase sequence of stable compound formation, notably so in cases of silicide formation. Ion-induced mixing not only can lead to stable compound formation, but also to metastable alloy formation. In some metal-metal systems, terminal solubilities can be greatly extended by ion mixing. In other cases, where the two constituents of the system have different crystal structures, extension of terminal solubility from both sides of the phase diagram eventually becomes structurally incompatible and a glassy (amorphous) mixture can form. The composition range where this bifurcation is likely to occur is in the two-phase regions of the phase diagram. These concepts are potentially useful guides in selecting metal pairs that from metallic glasses by ion mixing. In this report, phenomenological correlation between stable (and metastable) phase formation and phase diagram is discussed in terms of recent experimental data.

  18. Scalable Lateral Mixing and Coherent Turbulence (LatMix) DRI: Turbulence-Resolving Simulations of Upper-Ocean Lateral Mixing

    DTIC Science & Technology

    2013-09-30

    The interaction of finescale and submesoscale upper-ocean mixing at fronts. OBJECTIVES Physically-based parameterizations of vertical mixed layer...dimensions of the oblong domain geometry on realized submesoscale instabilities. Figure 1: Surface buoyancy b from LES of baroclinic mixed layer

  19. Testing Mixed Distributions when the Mixing Distribution Is Known

    NASA Astrophysics Data System (ADS)

    Pommeret, Denys

    In this paper we present smooth goodness of fit tests for testing the mixture distribution of a sequence of i.i.d. random variables. We consider mixture models when the mixing distribution is known. We adapt a Schwarz’s criteria initiated by Ledwina (J Am Stat Assoc 89:1000-1005, 1994) and inspired by the Neyman (Skandinavian Aktuarial 20:149-199, 1937) smooth test procedure. A Monte Carlo study is provided in order to assess the performance of the test.

  20. Model Verification of Mixed Dynamic Systems

    NASA Technical Reports Server (NTRS)

    Evensen, D. A.; Chrostowski, J. D.; Hasselman, T. K.

    1982-01-01

    MOVER uses experimental data to verify mathematical models of "mixed" dynamic systems. The term "mixed" refers to interactive mechanical, hydraulic, electrical, and other components. Program compares analytical transfer functions with experiment.

  1. A survey of mixed finite element methods

    NASA Technical Reports Server (NTRS)

    Brezzi, F.

    1987-01-01

    This paper is an introduction to and an overview of mixed finite element methods. It discusses the mixed formulation of certain basic problems in elasticity and hydrodynamics. It also discusses special techniques for solving the discrete problem.

  2. Bounding CKM Mixing with a Fourth Family

    SciTech Connect

    Chanowitz, Michael S.

    2009-04-22

    CKM mixing between third family quarks and a possible fourth family is constrained by global fits to the precision electroweak data. The dominant constraint is from nondecoupling oblique corrections rather than the vertex correction to Z {yields} {bar b}b used in previous analyses. The possibility of large mixing suggested by some recent analyses of FCNC processes is excluded, but 3-4 mixing of the same order as the Cabbibo mixing of the first two families is allowed.

  3. Mixed wasted integrated program: Logic diagram

    SciTech Connect

    Mayberry, J.; Stelle, S.; O`Brien, M.; Rudin, M.; Ferguson, J.; McFee, J.

    1994-11-30

    The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development`s Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR).

  4. Contact sensitization to Compositae mix in children.

    PubMed

    Belloni Fortina, Anna; Romano, Ilaria; Peserico, Andrea

    2005-11-01

    The prevalence of contact sensitization to Compositae mix was investigated in 641 consecutive children. Seventeen children (12 with atopic dermatitis) tested positive for Compositae mix. We suggest adding Compositae mix to a pediatric screening series when investigating airborne dermatitis in children with atopic dermatitis.

  5. 7 CFR 51.2112 - Mixed varieties.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Sheller Run, U.S. Standard Sheller Run, U.S. No. 1 Whole and Broken may be designated as: “U.S. No. 1 Mixed;” “U.S. Select Sheller Run Mixed;” “U.S. Standard Sheller Run Mixed;” “U.S. No. 1 Whole and...

  6. Foam-Mixing-And-Dispensing Machine

    NASA Technical Reports Server (NTRS)

    Chong, Keith Y.; Toombs, Gordon R.; Jackson, Richard J.

    1996-01-01

    Time-and-money-saving machine produces consistent, homogeneously mixed foam, enhancing production efficiency. Automatically mixes and dispenses polyurethane foam in quantities specified by weight. Consists of cart-mounted, air-driven proportioning unit; air-activated mechanical mixing gun; programmable timer/counter, and controller.

  7. Pragmatism, Evidence, and Mixed Methods Evaluation

    ERIC Educational Resources Information Center

    Hall, Jori N.

    2013-01-01

    Mixed methods evaluation has a long-standing history of enhancing the credibility of evaluation findings. However, using mixed methods in a utilitarian way implicitly emphasizes convenience over engaging with its philosophical underpinnings (Denscombe, 2008). Because of this, some mixed methods evaluators and social science researchers have been…

  8. Moments, Mixed Methods, and Paradigm Dialogs

    ERIC Educational Resources Information Center

    Denzin, Norman K.

    2010-01-01

    I reread the 50-year-old history of the qualitative inquiry that calls for triangulation and mixed methods. I briefly visit the disputes within the mixed methods community asking how did we get to where we are today, the period of mixed-multiple-methods advocacy, and Teddlie and Tashakkori's third methodological moment. (Contains 10 notes.)

  9. A Call for Conducting Multivariate Mixed Analyses

    ERIC Educational Resources Information Center

    Onwuegbuzie, Anthony J.

    2016-01-01

    Several authors have written methodological works that provide an introductory- and/or intermediate-level guide to conducting mixed analyses. Although these works have been useful for beginning and emergent mixed researchers, with very few exceptions, works are lacking that describe and illustrate advanced-level mixed analysis approaches. Thus,…

  10. Mixed pneumoconiosis: silicosis, asbestosis, talcosis, and berylliosis.

    PubMed

    Mark, G J; Monroe, C B; Kazemi, H

    1979-06-01

    Mixed pneumoconiosis is pulmonary disease due to two or more inhaled mineral irritants. Chronic disease due to beryllium has not been a component of any described mixed pneumoconiosis. A man with occupational exposure to a combination of dusts developed severe pulmonary disease. Silicosis, talcosis, asbestosis, and berylliosis were all documented by an open biopsy of the lung. The varieties of mixed pneumoconiosis are summarized.

  11. Entropy of Mixing of Distinguishable Particles

    ERIC Educational Resources Information Center

    Kozliak, Evguenii I.

    2014-01-01

    The molar entropy of mixing yields values that depend only on the number of mixing components rather than on their chemical nature. To explain this phenomenon using the logic of chemistry, this article considers mixing of distinguishable particles, thus complementing the well-known approach developed for nondistinguishable particles, for example,…

  12. Qualitative Approaches to Mixed Methods Practice

    ERIC Educational Resources Information Center

    Hesse-Biber, Sharlene

    2010-01-01

    This article discusses how methodological practices can shape and limit how mixed methods is practiced and makes visible the current methodological assumptions embedded in mixed methods practice that can shut down a range of social inquiry. The article argues that there is a "methodological orthodoxy" in how mixed methods is practiced…

  13. Thin film mixed potential sensors

    DOEpatents

    Garzon, Fernando H.; Brosha, Eric L.; Mukundan, Rangachary

    2007-09-04

    A mixed potential sensor for oxidizable or reducible gases and a method of making. A substrate is provided and two electrodes are formed on a first surface of the substrate, each electrode being formed of a different catalytic material selected to produce a differential voltage between the electrodes from electrochemical reactions of the gases catalyzed by the electrode materials. An electrolytic layer of an electrolyte is formed over the electrodes to cover a first portion of the electrodes from direct exposure to the gases with a second portion of the electrodes uncovered for direct exposure to the gases.

  14. Can whales mix the ocean?

    NASA Astrophysics Data System (ADS)

    Lavery, T. J.; Roudnew, B.; Seuront, L.; Mitchell, J. G.; Middleton, J.

    2012-07-01

    Ocean mixing influences global climate and enhances primary productivity by transporting nutrient rich water into the euphotic zone. The contribution of the swimming biosphere to diapycnal mixing in the ocean has been hypothesised to occur on scales similar to that of tides or winds, however, the extent to which this contributes to nutrient transport and stimulates primary productivity has not been explored. Here, we introduce a novel method to estimate the diapycnal diffusivity that occurs as a result of a sperm whale swimming through a pycnocline. Nutrient profiles from the Hawaiian Ocean are used to further estimate the amount of nitrogen transported into the euphotic zone and the primary productivity stimulated as a result. We estimate that the 80 sperm whales that travel through an area of 104 km2 surrounding Hawaii increase diapycnal diffusivity by 10-6 m2 s-1 which results in the flux of 105 kg of nitrogen into the euphotic zone each year. This nitrogen input subsequently stimulates 6 × 105 kg of carbon per year. The nutrient input of swimming sperm whales is modest compared to dominant modes of nutrient transport such as nitrogen fixation but occurs more consistently and thus may provide the nutrients necessary to enable phytoplankton growth and survival in the absence of other seasonal and daily nutrient inputs.

  15. Mixing in straight shear layers

    NASA Technical Reports Server (NTRS)

    Karasso, P. S.; Mungal, M. G.

    1992-01-01

    Planar laser-induced fluorescence measurements were performed in a liquid plane mixing layer to extract the probability density function (pdf) of the mixture fraction of a passive scalar across the layer. Three Reynolds number (Re) cases were studied, 10,000, 33,000 and 90,000, with Re based on velocity difference and visual thickness. The results show that a non-marching pdf (central hump invariant from edge to edge of the layer) exists for Re = 10,000 but that a marching type pdf characterizes the Re = 33,000 and Re = 90,000 cases. For all cases, a broad range of mixture fraction values is found at each location across the layer. Streamwise and spanwise ramps across the layer, and structure-to-structure variation were observed and are believed to be responsible for the above behavior of the composition field. Tripping the boundary layer on the high-speed side of the splitter plate for each of the above three cases resulted in increased three-dimensionality and a change in the composition field. Average and average mixed fluid compositions are reported for all cases.

  16. [Mixed states: evolution of classifications].

    PubMed

    Pringuey, D; Cherikh, F; Giordana, B; Fakra, E; Dassa, D; Cermolacce, M; Belzeaux, R; Maurel, M; Azorin, J-M

    2013-12-01

    The nosological position of mixed states has followed the course of classifying methods in psychiatry, the steps of the invention of the clinic, progress in the organization of care, including the discoveries of psychopharmacology. The clinical observation of a mixture of symptoms emerging from usually opposite clinical conditions is classical. In the 70s, a syndromic specification fixed the main symptom combinations but that incongruous assortment failed to stabilize the nosological concept. Then stricter criteriology was proposed. To be too restrictive, a consensus operates a dimensional opening that attempts to meet the pragmatic requirements of nosology validating the usefulness of the class system. This alternation between rigor of categorization and return to a more flexible criteriological option reflects the search for the right balance between nosology and diagnosis. The definition of mixed states is best determined by their clinical and prognostic severity, related to the risk of suicide, their lower therapeutic response, the importance of their psychiatric comorbidities, anxiety, emotional lability, alcohol abuse. Trying to compensate for the lack of categorical definitions and better reflecting the clinical field problems, new definitions complement criteriology with dimensional aspects, particularly taking into account temperaments.

  17. Nanoscale Mixing of Soft Solids

    SciTech Connect

    Choi, Soo-Hyung; Lee, Sangwoo; Soto, Haidy E.; Lodge, Timothy P.; Bates, Frank S.

    2013-03-07

    Assessing the state of mixing on the molecular scale in soft solids is challenging. Concentrated solutions of micelles formed by self-assembly of polystyrene-block-poly(ethylene-alt-propylene) (PS-PEP) diblock copolymers in squalane (C{sub 30}H{sub 62}) adopt a body-centered cubic (bcc) lattice, with glassy PS cores. Utilizing small-angle neutron scattering (SANS) and isotopic labeling ({sup 1}H and {sup 2}H (D) polystyrene blocks) in a contrast-matching solvent (a mixture of squalane and perdeuterated squalane), we demonstrate quantitatively the remarkable fact that a commercial mixer can create completely random mixtures of micelles with either normal, PS(H), or deuterium-labeled, PS(D), cores on a well-defined bcc lattice. The resulting SANS intensity is quantitatively modeled by the form factor of a single spherical core. These results demonstrate both the possibility of achieving complete nanoscale mixing in a soft solid and the use of SANS to quantify the randomness.

  18. Tracer mixing at fracture intersections

    SciTech Connect

    Li, Guomin

    2001-02-10

    Discrete network models are one of the approaches used to simulate a dissolved contaminant, which is usually represented as a tracer in modeling studies, in fractured rocks. The discrete models include large numbers of individual fractures within the network structure, with flow and transport described on the scale of an individual fracture. Numerical simulations for the mixing characteristics and transfer probabilities of a tracer through a fracture intersection are performed for this study. A random-walk, particle-tracking model is applied to simulate tracer transport in fracture intersections by moving particles through space using individual advective and diffusive steps. The simulation results are compared with existing numerical and analytical solutions for a continuous intersection over a wide range of Peclet numbers. This study attempts to characterize the relative concentration at the outflow branches for a continuous intersection with different flow fields. The simulation results demonstrate that the mixing characteristics at the fracture intersections are a function not only of the Peclet number but also of the flow field pattern.

  19. Mixed Strategies in cyclic competition

    NASA Astrophysics Data System (ADS)

    Intoy, Ben; Pleimling, Michel

    2015-03-01

    Physicists have been using evolutionary game theory to model and simulate cyclically competing species, with applications to lizard mating strategies and competing bacterial strains. However these models assume that each agent plays the same strategy, which is called a pure strategy in game theory, until they are beaten by a better strategy which they immediately adopt. We relax this constraint of an agent playing a single strategy by instead letting the agent pick its strategy randomly from a probability distribution, which is called a mixed strategy in game theory. This scheme is very similar to multiple occupancy models seen in the literature, the major difference being that interactions happen between sites rather than within them. Choosing strategies out of a distribution also has applications to economic/social systems such as the public goods game. We simulate a model of mixed strategy and cylic competition on a one-dimensional lattice with three and four strategies and find interesting spatial and stability properties depending on how discretized the choice of strategy is for the agents. This work is supported by the US National Science Foundation through Grant DMR-1205309.

  20. Mixed waste characterization reference document

    SciTech Connect

    1997-09-01

    Waste characterization and monitoring are major activities in the management of waste from generation through storage and treatment to disposal. Adequate waste characterization is necessary to ensure safe storage, selection of appropriate and effective treatment, and adherence to disposal standards. For some wastes characterization objectives can be difficult and costly to achieve. The purpose of this document is to evaluate costs of characterizing one such waste type, mixed (hazardous and radioactive) waste. For the purpose of this document, waste characterization includes treatment system monitoring, where monitoring is a supplement or substitute for waste characterization. This document establishes a cost baseline for mixed waste characterization and treatment system monitoring requirements from which to evaluate alternatives. The cost baseline established as part of this work includes costs for a thermal treatment technology (i.e., a rotary kiln incinerator), a nonthermal treatment process (i.e., waste sorting, macronencapsulation, and catalytic wet oxidation), and no treatment (i.e., disposal of waste at the Waste Isolation Pilot Plant (WIPP)). The analysis of improvement over the baseline includes assessment of promising areas for technology development in front-end waste characterization, process equipment, off gas controls, and monitoring. Based on this assessment, an ideal characterization and monitoring configuration is described that minimizes costs and optimizes resources required for waste characterization.

  1. Mixing stops at the LHC

    SciTech Connect

    Agrawal, Prateek; Frugiuele, Claudia

    2014-01-01

    We study the phenomenology of a light stop NLSP in the presence of large mixing with either the first or the second generation. R-symmetric models provide a prime setting for this scenario, but our discussion also applies to the MSSM when a significant amount of mixing can be accommodated. In our framework the dominant stop decay is through the flavor violating mode into a light jet and the LSP in an extended region of parameter space. There are currently no limits from ATLAS and CMS in this region. We emulate shape-based hadronic SUSY searches for this topology, and find that they have potential sensitivity. If the extension of these analyses to this region is robust, we find that these searches can set strong exclusion limits on light stops. If not, then the flavor violating decay mode is challenging and may represent a blind spot in stop searches even at 13 TeV. Thus, an experimental investigation of this scenario is well motivated.

  2. Mixing stops at the LHC

    DOE PAGES

    Agrawal, Prateek; Frugiuele, Claudia

    2014-01-01

    We study the phenomenology of a light stop NLSP in the presence of large mixing with either the first or the second generation. R-symmetric models provide a prime setting for this scenario, but our discussion also applies to the MSSM when a significant amount of mixing can be accommodated. In our framework the dominant stop decay is through the flavor violating mode into a light jet and the LSP in an extended region of parameter space. There are currently no limits from ATLAS and CMS in this region. We emulate shape-based hadronic SUSY searches for this topology, and find thatmore » they have potential sensitivity. If the extension of these analyses to this region is robust, we find that these searches can set strong exclusion limits on light stops. If not, then the flavor violating decay mode is challenging and may represent a blind spot in stop searches even at 13 TeV. Thus, an experimental investigation of this scenario is well motivated.« less

  3. Diffusion in mixed solvents. II - The heat of mixing parameter

    NASA Technical Reports Server (NTRS)

    Carapellucci, P. A.

    1975-01-01

    Correlation of second-order rate constants for many reactions involving electron transfer between organic molecules, solvated electron reactions, iodine diffusion coefficients, and triplet state electron transfer reactions has been made with the heat of mixing parameter (HMP) for the aqueous binary solvent systems. The aqueous binary solvents studied are those containing methanol or ethanol (type I solvent); 1-propanol or tert-butyl alcohol (type II solvent); or sucrose or glycerol (type III solvent). A plot of the HMP vs. the diffusion parameter for each reaction yields superimposable curves for these reactions in a particular solvent mixture over the entire solvent mixture range, irrespective of the value of the reaction's rate constant or diffusion coefficient in water.

  4. PREFACE: Turbulent Mixing and Beyond Turbulent Mixing and Beyond

    NASA Astrophysics Data System (ADS)

    Abarzhi, Snezhana I.; Gauthier, Serge; Rosner, Robert

    2008-10-01

    The goals of the International Conference `Turbulent Mixing and Beyond' are to expose the generic problem of Turbulence and Turbulent Mixing in Unsteady Flows to a wide scientific community, to promote the development of new ideas in tackling the fundamental aspects of the problem, to assist in the application of novel approaches in a broad range of phenomena, where the non-canonical turbulent processes occur, and to have a potential impact on technology. The Conference provides the opportunity to bring together scientists from the areas which include, but are not limited to, high energy density physics, plasmas, fluid dynamics, turbulence, combustion, material science, geophysics, astrophysics, optics and telecommunications, applied mathematics, probability and statistics, and to have their attention focused on the long-standing formidable task. The Turbulent Mixing and Turbulence in Unsteady Flows, including multiphase flows, plays a key role in a wide variety of phenomena, ranging from astrophysical to nano-scales, under either high or low energy density conditions. Inertial confinement and magnetic fusion, light-matter interaction and non-equilibrium heat transfer, properties of materials under high strain rates, strong shocks, explosions, blast waves, supernovae and accretion disks, stellar non-Boussinesq and magneto-convection, planetary interiors and mantle-lithosphere tectonics, premixed and non-premixed combustion, oceanography, atmospheric flows, unsteady boundary layers, hypersonic and supersonic flows, are a few examples to list. A grip on unsteady turbulent processes is crucial for cutting-edge technology such as laser-micromachining and free-space optical telecommunications, and for industrial applications in aeronautics. Unsteady Turbulent Processes are anisotropic, non-local and multi-scale, and their fundamental scaling, spectral and invariant properties depart from the classical Kolmogorov scenario. The singular aspects and similarity of the

  5. Expandable mixing section gravel and cobble eductor

    DOEpatents

    Miller, Arthur L.; Krawza, Kenneth I.

    1997-01-01

    In a hydraulically powered pump for excavating and transporting slurries in hich it is immersed, the improvement of a gravel and cobble eductor including an expandable mixing section, comprising: a primary flow conduit that terminates in a nozzle that creates a water jet internal to a tubular mixing section of the pump when water pressure is applied from a primary supply flow; a tubular mixing section having a center line in alignment with the nozzle that creates a water jet; a mixing section/exit diffuser column that envelopes the flexible liner; and a secondary inlet conduit that forms an opening at a bas portion of the column and adjacent to the nozzle and water jet to receive water saturated gravel as a secondary flow that mixes with the primary flow inside of the mixing section to form a combined total flow that exits the mixing section and decelerates in the exit diffuser.

  6. A Darwinian mechanism for biogenic ocean mixing

    NASA Astrophysics Data System (ADS)

    Katija, Kakani; Dabiri, John

    2009-11-01

    Recent observations of biogenic turbulence in the ocean have led to conflicting ideas regarding the contribution of animal swimming to ocean mixing. Previous measurements indicate elevated turbulent dissipation in the vicinity of large populations of planktonic animals swimming in concert. However, elevated turbulent dissipation is by itself insufficient proof of substantial biogenic mixing. We conducted field measurements of mixing efficiency by individual Mastigias sp. (a Palauan jellyfish) using a self-contained underwater velocimetry apparatus. These measurements revealed another mechanism that contributes to animal mixing besides wake turbulence. This mechanism was first described by Sir Charles Galton Darwin and is in fact the dominant mechanism of mixing by swimming animals. The efficiency of Darwin's mechanism (or drift) is dependent on animal shape rather than fluid length scale and, unlike turbulent wake mixing, is enhanced by the fluid viscosity. Therefore, it provides a means of biogenic mixing that can be equally effective in small plankton and large mammals.

  7. Differences in bone-cement porosity by vacuum mixing, centrifugation, and hand mixing.

    PubMed

    Macaulay, William; DiGiovanni, Christopher W; Restrepo, Andres; Saleh, Khaled J; Walsh, Heather; Crossett, Lawrence S; Peterson, Margaret G E; Li, Stephen; Salvati, Eduardo A

    2002-08-01

    The mean pore size and percent porosity of vacuum-mixed cement were compared with centrifuged cement and cement hand mixed by skilled specialized operating room technicians. Centrifuged cement samples had the smallest mean pore size when compared with vacuum-mixed specimens. The mean pore size for the hand-mixed specimens was intermediate and not significantly different from the other 2 mixing techniques. Results were reversed, however, for mean percent porosity. Centrifuged cement had the highest percent porosity; vacuum-mixed cement, the lowest; and hand-mixed cement, intermediate. The porosity of vacuum-mixed Simplex P (Howmedica, Rutherford, NJ) bone-cement was similar from the initial to the remnant cement extruded from the cement gun. There was no reduced cement porosity with vacuum mixing or centrifugation as anticipated. Reversion to hand mixing by highly skilled technicians could result in a significant cost savings without negative effects on cement porosity.

  8. Microgravity acoustic mixing for particle cloud combustors

    NASA Technical Reports Server (NTRS)

    Pla, Frederic; Rubinstein, Robert I.

    1990-01-01

    Experimental and theoretical investigations of acoustic mixing procedures designed to uniformly distribute fuel particles in a combustion tube for application in the proposed Particle Cloud Combustion Experiment (PCCE) are described. Two acoustic mixing methods are investigated: mixing in a cylindrical tube using high frequency spinning modes generated by suitably phased, or quadrature speakers, and acoustic premixing in a sphere. Quadrature mixing leads to rapid circumferential circulation of the powder around the tube. Good mixing is observed in the circulating regions. However, because axial inhomogeneities are necessarily present in the acoustic field, this circulation does not extend throughout the tube. Simultaneous operation of the quadrature-speaker set and the axial-speaker was observed to produce considerably enhanced mixing compared to operation of the quadrature-speaker set alone. Mixing experiments using both types of speakers were free of the longitudinal powder drift observed using axial-speakers alone. Vigorous powder mixing was obtained in the sphere for many normal modes: however, in no case was the powder observed to fill the sphere entirely. Theoretical analysis indicated that mixing under steady conditions cannot fill more than a hemisphere except under very unusual conditions. Premixing in a hemisphere may be satisfactory; otherwise, complete mixing in microgravity might be possible by operating the speaker in short bursts. A general conclusion is that acoustic transients are more likely to produce good mixing than steady state conditions. The reason is that in steady conditions, flow structures like nodal planes are possible and often even unavoidable. These tend to separate the mixing region into cells across which powder cannot be transferred. In contrast, transients not only are free of such structures, they also have the characteristics, desirable for mixing, of randomness and disorder. This conclusion is corroborated by mixing

  9. 2-Ethyl-3-hy­droxy-1-isopropyl-4-pyridone

    PubMed Central

    Molokoane, Pule P.; Schutte, M.; Steyl, G.

    2012-01-01

    The title compound, C10H15NO2, crystallized with three mol­ecules in the asymmetric unit. These three mol­ecules are quite similar except for slight differences in the torsion angles of the substituents on the ring. The isopropyl C—C—N—C torsion angles (towards the carbon next to the ethyl bound carbon), for example, are −150.63 (11), −126.77 (13) and −138.76 (11)° for mol­ecules A, B and C, respectively, and the C—C—C—N torsion angles involving the ethyl C atoms are 102.90 (13), 87.81 (14) and 86.47 (13)°. The main difference between the three mol­ecules lies in the way they are arranged in the solid-state structure. All three mol­ecules form dimers that are connected through strong O—H⋯O hydrogen bonds with R 2 2(10) graph-set motifs. The symmetry of the dimers formed does however differ between mol­ecules. Mol­ecules B connect with each other to form inversion dimers. Mol­ecules A and C, on the other hand, form dimers with local twofold symmetry, but the two mol­ecules are crystallographically distinct. The B and C molecules are linked to themselves and to each other via C—H⋯O hydrogen bonds. This results in the formation of a three-dimensional network structure. PMID:23284535

  10. Crystal structure of 3-amino-2-ethyl­quinazolin-4(3H)-one

    PubMed Central

    El-Hiti, Gamal A.; Smith, Keith; Hegazy, Amany S.; Baashen, Mohammed; Kariuki, Benson M.

    2015-01-01

    The mol­ecule of the title compound, C10H11N3O, is planar, including the ethyl group, as indicated by the N—C—C—C torsion angle of 1.5 (2)°. In the crystal, inversion-related mol­ecules are stacked along the a axis. Mol­ecules are oriented head-to-tail and display π–π inter­actions with a centroid-to-centroid distance of 3.6664 (8) Å. N—H⋯O hydrogen bonds between mol­ecules generate a ‘step’ structure through formation of an R 2 2(10) ring. PMID:26396885

  11. Bromidotetra-kis-(1H-2-ethyl-5-methyl-imidazole-κN)copper(II) bromide.

    PubMed

    Godlewska, Sylwia; Baranowska, Katarzyna; Socha, Joanna; Dołęga, Anna

    2011-12-01

    The Cu(II) ion in the title compound, [CuBr(C(6)H(10)N(2))(4)]Br, is coordinated in a square-based-pyramidal geometry by the N atoms of four imidazole ligands and a bromide anion in the apical site. Both the Cu(II) and Br(-) atoms lie on a crystallographic fourfold axis. In the crystal, the [CuBr(C(6)H(10)N(2))(4)](+) complex cations are linked to the uncoordinated Br(-) anions (site symmetry [Formula: see text]) by N-H⋯Br hydrogen bonds, generating a three-dimensional network. The ethyl group of the imidazole ligand was modelled as disordered over two orientations with occupancies of 0.620 (8) and 0.380 (8).

  12. Bromidotetra-kis-(2-ethyl-1H-imidazole-κN (3))copper(II) bromide.

    PubMed

    Godlewska, Sylwia; Kelm, Harald; Krüger, Hans-Jörg; Dołęga, Anna

    2012-12-01

    The Cu(II) ion in the title mol-ecular salt, [CuBr(C5H8N2)4]Br, is coordinated in a square-pyramidal geometry by four N atoms of imidazole ligands and one bromide anion in the apical position. In the crystal, the ions are linked by N-H⋯Br hydrogen bonds involving both the coordinating and the free bromide species as acceptors. A C-H⋯Br inter-action is also observed. Overall, a three-dimensional network results.

  13. 77 FR 20721 - 2-Ethyl-1-hexanol; Exemption From the Requirement of a Tolerance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-06

    ... the liver with peroxisome proliferation as the major hepatic endpoint. The lowest NOAEL was observed in rats at 100 mg/kg/day based on liver weights and liver peroxisomes at the LOAEL of 320 mg/kg/day... to 1,080 mg/ kg/day when fed on diets containing diethylhexyl adipate (DEHA). In mammals, DEHA...

  14. RIFM fragrance ingredient safety assessment, 2-ethyl-1-hexanol, CAS registry number 104-76-7.

    PubMed

    Api, A M; Belsito, D; Bhatia, S; Bruze, M; Calow, P; Dagli, M L; Dekant, W; Fryer, A D; Kromidas, L; La Cava, S; Lalko, J F; Lapczynski, A; Liebler, D C; Penning, T M; Politano, V T; Ritacco, G; Salvito, D; Schultz, T W; Shen, J; Sipes, I G; Wall, B; Wilcox, D K

    2016-11-01

    The use of this material under current conditions is supported by existing information. This material was evaluated for genotoxicity, repeated dose toxicity, developmental toxicity, reproductive toxicity, local respiratory toxicity, phototoxicity, skin sensitization, as well as environmental safety. Data show that this material is not genotoxic. Data from the suitable read across analog 2-butyloctan-1-ol (CAS # 3913-02-8) show that this material does not have skin sensitization potential. The reproductive and local respiratory toxicity endpoints were completed using the TTC (Threshold of Toxicological Concern) for a Cramer Class I material (0.03 and 1.4 mg/day, respectively). The developmental and repeat dose toxicity endpoints were completed data on the target material which provided a MOE > 100. The phototoxicity/photoallergenicity endpoint was completed based on suitable UV spectra. The environmental endpoint was completed as described in the RIFM Framework.

  15. Mediterranean outflow mixing and dynamics.

    PubMed

    Price, J F; Baringer, M O; Lueck, R G; Johnson, G C; Ambar, I; Parrilla, G; Cantos, A; Kennelly, M A; Sanford, T B

    1993-02-26

    The Mediterranean Sea produces a salty, dense outflow that is strongly modified by entrainment as it first begins to descend the continental slope in the eastern Gulf of Cadiz. The current accelerates to 1.3 meters per second, which raises the internal Froude number above 1, and is intensely turbulent through its full thickness. The outflow loses about half of its density anomaly and roughly doubles its volume transport as it entrains less saline North Atlantic Central water. Within 100 kilometers downstream, the current is turned by the Coriolis force until it flows nearly parallel to topography in a damped geostrophic balance. The mixed Mediterranean outflow continues westward, slowly descending the continental slope until it becomes neutrally buoyant in the thermocline where it becomes an important water mass.

  16. Mixing in SRS Closure Business Unit Applications

    SciTech Connect

    POIRIER, MICHAELR.

    2004-06-23

    The following equipment is commonly used to mix fluids: mechanical agitators, jets (pumps), shrouded axial impeller mixers (Flygt mixers), spargers, pulsed jet mixers, boiling, static mixers, falling films, liquid sprays, and thermal convection. This discussion will focus on mechanical agitators, jets, shrouded axial impeller mixers, spargers, and pulsed jet mixers, as these devices are most likely to be employed in Savannah River Site (SRS) Closure Business applications. In addressing mixing problems in the SRS Tank Farm, one must distinguish between different mixing objectives. These objectives include sludge mixing (e.g., Extended Sludge Processing), sludge retrieval (e.g., sludge transfers between tanks), heel retrieval (e.g., Tanks 18F and 19F), chemical reactions (e.g., oxalic acid neutralization) and salt dissolution. For example, one should not apply sludge mixing guidelines to heel removal applications. Mixing effectiveness is a function of both the mixing device (e.g., slurry pump, agitator, air sparger) and the properties of the material to be mixed (e.g., yield stress, viscosity, density, and particle size). The objective of this document is to provide background mixing knowledge for the SRS Closure Business Unit personnel and to provide general recommendations for mixing in SRS applications.

  17. Extrusion-mixing compared with hand-mixing of polyether impression materials?

    PubMed

    McMahon, Caroline; Kinsella, Daniel; Fleming, Garry J P

    2010-12-01

    The hypotheses tested were two-fold (a) whether altering the base:catalyst ratio influences working time, elastic recovery and strain in compression properties of a hand-mixed polyether impression material and (b) whether an extrusion-mixed polyether impression material would have a significant advantage over a hand-mixed polyether impression material mixed to the optimum base:catalyst ratio. The polyether was hand-mixed at the optimum (manufacturers recommended) base:catalyst ratios (7:1) and further groups were made by increasing or decreasing the catalyst length by 25%. Additionally specimens were also made from an extrusion-mixed polyether impression material and compared with the optimum hand-mixed base:catalyst ratio. A penetrometer assembly was used to measure the working time (n=5). Five cylindrical specimens for each hand-mixed and extrusion mixed group investigated were employed for elastic recovery and strain in compression testing. Hand-mixing polyether impression materials with 25% more catalyst than that recommended significantly decreased the working time while hand-mixing with 25% less catalyst than that recommended significantly increased the strain in compression. The extrusion-mixed polyether impression material provided similar working time, elastic recovery and strain in compression to the hand-mixed polyether mixed at the optimum base:catalyst ratio.

  18. Investigation on flow and mixing characteristics of supersonic mixing layer induced by forced vibration of cantilever

    NASA Astrophysics Data System (ADS)

    Zhang, Dongdong; Tan, Jianguo; Lv, Liang

    2015-12-01

    The mixing process has been an important issue for the design of supersonic combustion ramjet engine, and the mixing efficiency plays a crucial role in the improvement of the combustion efficiency. In the present study, nanoparticle-based planar laser scattering (NPLS), particle image velocimetry (PIV) and large eddy simulation (LES) are employed to investigate the flow and mixing characteristics of supersonic mixing layer under different forced vibration conditions. The indexes of fractal dimension, mixing layer thickness, momentum thickness and scalar mixing level are applied to describe the mixing process. Results show that different from the development and evolution of supersonic mixing layer without vibration, the flow under forced vibration is more likely to present the characteristics of three-dimensionality. The laminar flow region of mixing layer under forced vibration is greatly shortened and the scales of rolled up Kelvin-Helmholtz vortices become larger, which promote the mixing process remarkably. The fractal dimension distribution reveals that comparing with the flow without vibration, the turbulent fluctuation of supersonic mixing layer under forced vibration is more intense. Besides, the distribution of mixing layer thickness, momentum thickness and scalar mixing level are strongly influenced by forced vibration. Especially, when the forcing frequency is 4000 Hz, the mixing layer thickness and momentum thickness are 0.0391 m and 0.0222 m at the far field of 0.16 m, 83% and 131% higher than that without vibration at the same position, respectively.

  19. Children's understanding and experience of mixed emotions.

    PubMed

    Larsen, Jeff T; To, Yen M; Fireman, Gary

    2007-02-01

    Though some models of emotion contend that happiness and sadness are mutually exclusive in experience, recent findings suggest that adults can feel happy and sad at the same time in emotionally complex situations. Other research has shown that children develop a better conceptual understanding of mixed emotions as they grow older, but no research has examined children's actual experience of mixed emotions. To examine developmental differences in the experience of mixed emotions, we showed children ages 5 to 12 scenes from an animated film that culminated with a father and daughter's bittersweet farewell. In subsequent interviews, older children were more likely than younger children to report experiencing mixed emotions. These results suggest that in addition to having a better conceptual understanding of mixed emotions, older children are more likely than younger children to actually experience mixed emotions in emotionally complex situations.

  20. Electrothermal blinking vortices for chaotic mixing

    NASA Astrophysics Data System (ADS)

    Loire, Sophie; Kauffmann, Paul; Gimenez, Paul; Meinhart, Carl; Mezic, Igor

    2012-11-01

    We present an experimental and theoretical study of electrothermal chaotic mixing using blinking of asymmetric 2D electrothermal vortices. Electrothermal flows are modelled with 2D finite element method using COMSOL software based on an enhanced electrothermal model. Velocities in top-view and side-view devices are measured by micro particle image velocimetry (μPIV). The experimentally reconstructed velocity profile shows a dramatic asymmetry between the two vortices, in good agreement with the FEM model. The separation line between the two vortices is shifted and tilted making the blinking vortices overlap. We use the mix-variance coefficient (MVC) on experimental particle detection data and numerical trajectory simulations to evaluate mixing at different scales including the layering of fluid interfaces by the flow, a keypoint for efficient mixing. The blinking vortices method greatly improve mixing efficiency. Theoretical, experimental and simulation results of the mixing process will be presented.

  1. Mercury removal from solid mixed waste

    SciTech Connect

    Gates, D.D.; Morrissey, M.; Chava, K.K.; Chao, K.

    1994-12-31

    The removal of mercury from mixed wastes is an essential step in eliminating the temporary storage of large inventories of mixed waste throughout the Department of Energy (DOE) complex. Currently thermal treatment has been identified as a baseline technology and is being developed as part of the DOE Mixed Waste Integrated Program (MWIP). Since thermal treatment will not be applicable to all mercury containing mixed waste and the removal of mercury prior to thermal treatment may be desirable, laboratory studies have been initiated at Oak Ridge National Laboratory (ORNL) to develop alternative remediation technologies capable of removing mercury from certain mixed waste. This paper describes laboratory investigations of the KI/I{sub 2} leaching processes to determine the applicability of this process to mercury containing solid mixed waste.

  2. Droplet mixers: Microfluidics, mixing measures and optimization

    NASA Astrophysics Data System (ADS)

    Stone, Zachary; Stone, Howard

    2003-11-01

    Rapid mixing is essential in a variety of microfluidic applications but is often difficult to achieve at low Reynolds numbers. Inspired by a recently developed microdevice that mixes reagents in droplets, which simply flow along a periodic serpentine channel (Song, Tice and Ismagilov, 2003), we investigate a model ``droplet mixer". The model consists of a spherical droplet immersed in a periodic sequence of distinct external flows, which are superpositions of uniform and shear flows. We label the fluid inside the droplet with two colors and visualize mixing with a method we call ``backtrace imaging", which allows us to render cross-sections of the droplet at arbitrary times during the mixing cycle. To analyze our results, we present a simple measure of mixing, which allows us to locate sets of parameters that optimize mixing over a small number of flow cycles. We also consider shear flows in multiple directions and the effect of random variations in the durations of external flows.

  3. Cowles Dissolver Fire Involving IR Flare Mix

    DTIC Science & Technology

    1994-08-01

    fluoroethylene (PTFE), and a fluoroelastomer binder dissolved in acetone. Hexane is used to precipitate the binder and wash the mix. During the wash...ethylene (PTFE), and a fluoroelastomer binder. The fluoroelastomer binder is dissolved in acetone before the mix is made. The PTFE and magnesium...the binder precipitates on the surface of the suspended particles. The solids are allowed to settle and the liquid is siphoned from the mix bowl

  4. Mechanisms of tolerance induced via mixed chimerism.

    PubMed

    Sykes, Megan

    2007-05-01

    Mixed hematopoietic chimerism provides a powerful means of inducing robust, donor-specific tolerance. In this article, the minimal requirements for achieving mixed chimerism, the development of new reagents that promote its achievement, and the mechanisms by which peripheral and intrathymic tolerance are achieved via mixed chimerism are discussed. An emerging understanding of these mechanisms, along with the development of new immunosuppressive reagents, is allowing advancement toward clinical application of this approach.

  5. Quantifying uncertainty in stable isotope mixing models

    SciTech Connect

    Davis, Paul; Syme, James; Heikoop, Jeffrey; Fessenden-Rahn, Julianna; Perkins, George; Newman, Brent; Chrystal, Abbey E.; Hagerty, Shannon B.

    2015-05-19

    Mixing models are powerful tools for identifying biogeochemical sources and determining mixing fractions in a sample. However, identification of actual source contributors is often not simple, and source compositions typically vary or even overlap, significantly increasing model uncertainty in calculated mixing fractions. This study compares three probabilistic methods, SIAR [Parnell et al., 2010] a pure Monte Carlo technique (PMC), and Stable Isotope Reference Source (SIRS) mixing model, a new technique that estimates mixing in systems with more than three sources and/or uncertain source compositions. In this paper, we use nitrate stable isotope examples (δ15N and δ18O) but all methods tested are applicable to other tracers. In Phase I of a three-phase blind test, we compared methods for a set of six-source nitrate problems. PMC was unable to find solutions for two of the target water samples. The Bayesian method, SIAR, experienced anchoring problems, and SIRS calculated mixing fractions that most closely approximated the known mixing fractions. For that reason, SIRS was the only approach used in the next phase of testing. In Phase II, the problem was broadened where any subset of the six sources could be a possible solution to the mixing problem. Results showed a high rate of Type I errors where solutions included sources that were not contributing to the sample. In Phase III some sources were eliminated based on assumed site knowledge and assumed nitrate concentrations, substantially reduced mixing fraction uncertainties and lowered the Type I error rate. These results demonstrate that valuable insights into stable isotope mixing problems result from probabilistic mixing model approaches like SIRS. The results also emphasize the importance of identifying a minimal set of potential sources and quantifying uncertainties in source isotopic composition as well as demonstrating the value of additional information in reducing the

  6. Quantifying uncertainty in stable isotope mixing models

    DOE PAGES

    Davis, Paul; Syme, James; Heikoop, Jeffrey; ...

    2015-05-19

    Mixing models are powerful tools for identifying biogeochemical sources and determining mixing fractions in a sample. However, identification of actual source contributors is often not simple, and source compositions typically vary or even overlap, significantly increasing model uncertainty in calculated mixing fractions. This study compares three probabilistic methods, SIAR [Parnell et al., 2010] a pure Monte Carlo technique (PMC), and Stable Isotope Reference Source (SIRS) mixing model, a new technique that estimates mixing in systems with more than three sources and/or uncertain source compositions. In this paper, we use nitrate stable isotope examples (δ15N and δ18O) but all methods testedmore » are applicable to other tracers. In Phase I of a three-phase blind test, we compared methods for a set of six-source nitrate problems. PMC was unable to find solutions for two of the target water samples. The Bayesian method, SIAR, experienced anchoring problems, and SIRS calculated mixing fractions that most closely approximated the known mixing fractions. For that reason, SIRS was the only approach used in the next phase of testing. In Phase II, the problem was broadened where any subset of the six sources could be a possible solution to the mixing problem. Results showed a high rate of Type I errors where solutions included sources that were not contributing to the sample. In Phase III some sources were eliminated based on assumed site knowledge and assumed nitrate concentrations, substantially reduced mixing fraction uncertainties and lowered the Type I error rate. These results demonstrate that valuable insights into stable isotope mixing problems result from probabilistic mixing model approaches like SIRS. The results also emphasize the importance of identifying a minimal set of potential sources and quantifying uncertainties in source isotopic composition as well as demonstrating the value of additional information in reducing the uncertainty in calculated

  7. Quantifying uncertainty in stable isotope mixing models

    NASA Astrophysics Data System (ADS)

    Davis, Paul; Syme, James; Heikoop, Jeffrey; Fessenden-Rahn, Julianna; Perkins, George; Newman, Brent; Chrystal, Abbey E.; Hagerty, Shannon B.

    2015-05-01

    Mixing models are powerful tools for identifying biogeochemical sources and determining mixing fractions in a sample. However, identification of actual source contributors is often not simple, and source compositions typically vary or even overlap, significantly increasing model uncertainty in calculated mixing fractions. This study compares three probabilistic methods, Stable Isotope Analysis in R (SIAR), a pure Monte Carlo technique (PMC), and Stable Isotope Reference Source (SIRS) mixing model, a new technique that estimates mixing in systems with more than three sources and/or uncertain source compositions. In this paper, we use nitrate stable isotope examples (δ15N and δ18O) but all methods tested are applicable to other tracers. In Phase I of a three-phase blind test, we compared methods for a set of six-source nitrate problems. PMC was unable to find solutions for two of the target water samples. The Bayesian method, SIAR, experienced anchoring problems, and SIRS calculated mixing fractions that most closely approximated the known mixing fractions. For that reason, SIRS was the only approach used in the next phase of testing. In Phase II, the problem was broadened where any subset of the six sources could be a possible solution to the mixing problem. Results showed a high rate of Type I errors where solutions included sources that were not contributing to the sample. In Phase III some sources were eliminated based on assumed site knowledge and assumed nitrate concentrations, substantially reduced mixing fraction uncertainties and lowered the Type I error rate. These results demonstrate that valuable insights into stable isotope mixing problems result from probabilistic mixing model approaches like SIRS. The results also emphasize the importance of identifying a minimal set of potential sources and quantifying uncertainties in source isotopic composition as well as demonstrating the value of additional information in reducing the uncertainty in calculated

  8. An Introduction to LANL Mixed Potential Sensors

    SciTech Connect

    Mukundan, Rangachary; Brosha, Eric Lanich; Kreller, Cortney

    2015-01-26

    These are slides for a webinar given on the topics of an introduction to LANL mixed potential sensors. Topics include the history of LANL electrochemical sensor work, an introduction to mixed potential sensors, LANL uniqueness, and an application of LANL mixed potential sensors. The summary is as follows: Improved understanding of the mixed-potential sensor mechanism (factors controlling the sensor response identified), sensor design optimized to maximize sensor sensitivity and durability (porous electrolyte/dense electrodes), electrodes selected for various specific applications (CO, HC, H2), sensor operating parameters optimized for improved gas selectivity (NOx, NH3).

  9. TANK MIXING STUDY WITH FLOW RECIRCULATION

    SciTech Connect

    Lee, S.

    2014-06-25

    The primary objective of this work is to quantify the mixing time when two miscible fluids are mixed by one recirculation pump and to evaluate adequacy of 2.5 hours of pump recirculation to be considered well mixed in SRS tanks, JT-71/72. The work scope described here consists of two modeling analyses. They are the steady state flow pattern analysis during pump recirculation operation of the tank liquid and transient species transport calculations based on the initial steady state flow patterns. The modeling calculations for the mixing time are performed by using the 99% homogeneity criterion for the entire domain of the tank contents.

  10. Samoan Passage Abyssal Mixing Experiment

    NASA Astrophysics Data System (ADS)

    Mickett, J. B.; Voet, G.; Alford, M. H.; Girton, J. B.; Carter, G. S.

    2012-12-01

    The majority of the bottom water entering the North Pacific, about 6 Sv of mostly Antarctic origin, flows northward through the Samoan Passage (SP), where previous hydrographic studies have inferred extremely strong watermass modification as it transits the complicated, narrow passage. Global-scale numerical models at best poorly resolve this critical aspect of the global ocean circulation and the processes that affect it. We are in the midst of conducting a major next-generation experiment, coupling hydrographic/lowered ADCP and microstructure profiler measurements with simultaneous high-resolution profiling moorings and detailed numerical simulations. Our goals are to: (1) quantify the flow and its pathways through the SP, and compare them to measurements made 20 years ago as part of the World Ocean Circulation Experiment (WOCE), 2) quantify, with direct measurements, the turbulence and mixing the flow undergoes and the processes that lead to it, and 3) use the resulting knowledge to determine the best strategy for future monitoring of the SP. Here we present initial results from the first two of the experiment's three cruises, which have provided a detailed view of the flow magnitude, pathways and turbulence as it transits the passage's sills. Bathymetry, stratification, rotation, and inertia all play important roles in selecting the pathways taken by the flow, with the lighter layers siphoning off through the shallower sills to the west and the densest water following the deeper main eastern channel. Flows in this main channel are initially O(0.1 m/s), accelerating to > 0.4 m/s at the northernmost of the two major sills, leading to strong shears and warming of the bottom water from 0.66 to 0.72 C through mixing within the stratified overflow and entrainment of overlying water. Direct microstructure measurements show large vertical diffusivities of 10^{-4}-10^{-3} m^2/s throughout the passage and up to 10^{-2} m^2/s past the northern sill, where the flow

  11. Treatment of mixed waste coolant

    SciTech Connect

    Kidd, S.; Bowers, J.S.

    1995-02-01

    The primary processes used at Lawrence Livermore National Laboratory (LLNL) for treatment of radioactively contaminated machine coolants are industrial waste treatment and in situ carbon adsorption. These two processes simplify approaches to meeting the sanitary sewer discharge limits and subsequent Land Disposal Restriction criteria for hazardous and mixed wastes (40 CFR 268). Several relatively simple technologies are used in industrial water treatment. These technologies are considered Best Demonstrated Available Technologies, or BDAT, by the Environmental Protection Agency. The machine coolants are primarily aqueous and contain water soluble oil consisting of ethanol amine emulsifiers derived from fatty acids, both synthetic and natural. This emulsion carries away metal turnings from a part being machined on a lathe or other machining tool. When the coolant becomes spent, it contains chlorosolvents carried over from other cutting operations as well as a fair amount of tramp oil from machine bearings. This results in a multiphasic aqueous waste that requires treatment of metal and organic contaminants. During treatment, any dissolved metals are oxidized with hydrogen peroxide. Once oxidized, these metals are flocculated with ferric sulfate and precipitated with sodium hydroxide, and then the precipitate is filtered through diatomaceous earth. The emulsion is broken up by acidifying the coolant. Solvents and oils are adsorbed using powdered carbon. This carbon is easily separated from the remaining coolant by vacuum filtration.

  12. First principles nonequilibrium plasma mixing

    NASA Astrophysics Data System (ADS)

    Ticknor, C.; Herring, S. D.; Lambert, F.; Collins, L. A.; Kress, J. D.

    2014-01-01

    We have performed nonequilibrium classical and quantum-mechanical molecular dynamics simulations that follow the interpenetration of deuterium-tritium (DT) and carbon (C) components through an interface initially in hydrostatic and thermal equilibrium. We concentrate on the warm, dense matter regime with initial densities of 2.5-5.5 g/cm3 and temperatures from 10 to 100 eV. The classical treatment employs a Yukawa pair-potential with the parameters adjusted to the plasma conditions, and the quantum treatment rests on an orbital-free density functional theory at the Thomas-Fermi-Dirac level. For times greater than about a picosecond, the component concentrations evolve in accordance with Fick's law for a classically diffusing fluid with the motion, though, described by the mutual diffusion coefficient of the mixed system rather than the self-diffusion of the individual components. For shorter times, microscopic processes control the clearly non-Fickian dynamics and require a detailed representation of the electron probability density in space and time.

  13. Inference of ICF implosion core mix using experimental data and theoretical mix modeling

    SciTech Connect

    Sherrill, Leslie Welser; Haynes, Donald A; Cooley, James H; Sherrill, Manolo E; Mancini, Roberto C; Tommasini, Riccardo; Golovkin, Igor E; Haan, Steven W

    2009-01-01

    The mixing between fuel and shell materials in Inertial Confinement Fusion (lCF) implosion cores is a current topic of interest. The goal of this work was to design direct-drive ICF experiments which have varying levels of mix, and subsequently to extract information on mixing directly from the experimental data using spectroscopic techniques. The experimental design was accomplished using hydrodynamic simulations in conjunction with Haan's saturation model, which was used to predict the mix levels of candidate experimental configurations. These theoretical predictions were then compared to the mixing information which was extracted from the experimental data, and it was found that Haan's mix model predicted trends in the width of the mix layer as a function of initial shell thickness. These results contribute to an assessment of the range of validity and predictive capability of the Haan saturation model, as well as increasing confidence in the methods used to extract mixing information from experimental data.

  14. Critical Appraisal of Mixed Methods Studies

    ERIC Educational Resources Information Center

    Heyvaert, Mieke; Hannes, Karin; Maes, Bea; Onghena, Patrick

    2013-01-01

    In several subdomains of the social, behavioral, health, and human sciences, research questions are increasingly answered through mixed methods studies, combining qualitative and quantitative evidence and research elements. Accordingly, the importance of including those primary mixed methods research articles in systematic reviews grows. It is…

  15. Toponium-Z/sup 0/ mixing

    SciTech Connect

    Franzini, P.J.

    1986-11-01

    The subject of Z/sup 0/-toponium interference is briefly reviewed. The qualitative features of the Z/sup 0/ mixing with one t anti t state are discussed. Effects of mixing with the full t anti t spectrum, of the smearing due to beam spread, and of different potentials, are then shown.

  16. Discontinuous Mixed Covolume Methods for Parabolic Problems

    PubMed Central

    Zhu, Ailing

    2014-01-01

    We present the semidiscrete and the backward Euler fully discrete discontinuous mixed covolume schemes for parabolic problems on triangular meshes. We give the error analysis of the discontinuous mixed covolume schemes and obtain optimal order error estimates in discontinuous H(div) and first-order error estimate in L2. PMID:24983008

  17. Thin films of mixed metal compounds

    DOEpatents

    Mickelsen, Reid A.; Chen, Wen S.

    1985-01-01

    A compositionally uniform thin film of a mixed metal compound is formed by simultaneously evaporating a first metal compound and a second metal compound from independent sources. The mean free path between the vapor particles is reduced by a gas and the mixed vapors are deposited uniformly. The invention finds particular utility in forming thin film heterojunction solar cells.

  18. 7 CFR 51.576 - Mixed blanch.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Standards for Celery Definitions § 51.576 Mixed blanch. Mixed blanch consists of green and fairly...

  19. 7 CFR 51.576 - Mixed blanch.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Standards for Celery Definitions § 51.576 Mixed blanch. Mixed blanch consists of green and fairly...

  20. 7 CFR 51.576 - Mixed blanch.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Standards for Celery Definitions § 51.576 Mixed blanch. Mixed blanch consists of green and fairly...

  1. Mixed Methods, Triangulation, and Causal Explanation

    ERIC Educational Resources Information Center

    Howe, Kenneth R.

    2012-01-01

    This article distinguishes a disjunctive conception of mixed methods/triangulation, which brings different methods to bear on different questions, from a conjunctive conception, which brings different methods to bear on the same question. It then examines a more inclusive, holistic conception of mixed methods/triangulation that accommodates…

  2. Mixed Methods Research Designs in Counseling Psychology

    ERIC Educational Resources Information Center

    Hanson, William E.; Creswell, John W.; Clark, Vicki L. Plano; Petska, Kelly S.; Creswell, David J.

    2005-01-01

    With the increased popularity of qualitative research, researchers in counseling psychology are expanding their methodologies to include mixed methods designs. These designs involve the collection, analysis, and integration of quantitative and qualitative data in a single or multiphase study. This article presents an overview of mixed methods…

  3. Is There a School Mix Effect?

    ERIC Educational Resources Information Center

    Gorard, Stephen

    2006-01-01

    This paper uses the notion of "pathological" social science, wherein large claims to knowledge are made on the basis of very small differences in the data, to consider the notion of the school mix effect. It describes a variety of plausible alternative explanations for the same sets of findings, including the school mix effect, but also errors in…

  4. Neutrino mixing and oscillations in astrophysical environments

    SciTech Connect

    Balantekin, A. B.

    2014-05-02

    A brief review of the current status of neutrino mixing and oscillations in astrophysical environments, with particular emphasis on the Sun and core-collapse supernovae, is given. Implications of the existence of sterile states which mix with the active neutrinos are discussed.

  5. Mixing efficiency of turbulent stratified flows

    NASA Astrophysics Data System (ADS)

    White, B. L.; Scotti, A. D.

    2012-12-01

    Small-scale mixing in the stratified interior of the ocean is a fundamental, but poorly characterized, controlling factor of the global Meridional Overturning Circulation (MOC). The mixing efficiency in the ocean has typically been assumed to be 20%, which is used as a basis to estimate the required turbulent dissipation to support the ocean diapycnal buoyancy flux. In this talk, we use DNS datasets to calculate the mixing efficiency in different classes of stratified turbulent flows. In particular, we compare flows forced thermodynamically by production of Available Potential Energy (APE) at a boundary, such as horizontal convection (a simple model for an ocean forced by differential surface heating) and flows that are forced mechanically by surface stresses. The mixing efficiency is calculated based on the irreversible diapycnal flux of buoyancy (Winters and D'Asaro, 1996; Scotti et al., 2006) instead of the more customary turbulent buoyancy flux, thereby isolating mixing from reversible processes (e.g., internal waves). For mechanically-driven flows, profiles of mixing efficiency vs. buoyancy Reynolds number are in agreement with accepted values for stratified turbulent shear flows. However, for flows in which mixing is driven in part or fully by thermodynamic forcing and an excess of APE, DNS results show much higher values of the mixing efficiency, approaching unity for horizontal convection. Implications of these results for the energy budget of the MOC are discussed. Note: The DNS data sets of turbulent stratified channel flow are provided courtesy of M. Garcia-Villalba and J. C. del Alamo.

  6. 7 CFR 29.3532 - Mixed (M).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Mixed (M). 29.3532 Section 29.3532 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 95) § 29.3532 Mixed (M). Variegated or distinctly different colors of the type mingled...

  7. 7 CFR 29.3532 - Mixed (M).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Mixed (M). 29.3532 Section 29.3532 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 95) § 29.3532 Mixed (M). Variegated or distinctly different colors of the type mingled...

  8. Treatment of mixed features in bipolar disorder.

    PubMed

    Rosenblat, Joshua D; McIntyre, Roger S

    2016-09-13

    Mood episodes with Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5)-defined mixed features are highly prevalent in bipolar disorder (BD), affecting ~40% of patients during the course of illness. Mixed states are associated with poorer clinical outcomes, greater treatment resistance, higher rates of comorbidity, more frequent mood episodes, and increased rates of suicide. The objectives of the current review are to identify, summarize, and synthesize studies assessing the efficacy of treatments specifically for BD I and II mood episodes (ie, including manic, hypomanic, and major depressive episodes) with DSM-5-defined mixed features. Two randomized controlled trials (RCTs) and 6 post-hoc analyses were identified, all of which assessed the efficacy of second-generation antipsychotics (SGAs) for the acute treatment of BD mood episodes with mixed features. Results from these studies provide preliminary support for SGAs as efficacious treatments for both mania with mixed features and bipolar depression with mixed features. However, there are inadequate data to definitively support or refute the clinical use of specific agents. Conventional mood stabilizing agents (eg, lithium and divalproex) have yet to have been adequately studied in DSM-5-defined mixed features. Further study is required to assess the efficacy, safety, and tolerability of treatments specifically for BD mood episodes with mixed features.

  9. Tower Water-Vapor Mixing Ratio

    SciTech Connect

    Guastad, Krista; Riihimaki, Laura; none,

    2013-04-01

    The purpose of the Tower Water-Vapor Mixing Ratio (TWRMR) value-added product (VAP) is to calculate water-vapor mixing ratio at the 25-meter and 60-meter levels of the meteorological tower at the Southern Great Plains (SGP) Central Facility.

  10. Film processing investigation. [improved chemical mixing system

    NASA Technical Reports Server (NTRS)

    Kelly, J. L.

    1972-01-01

    The present operational chemical mixing system for the Photographic Technology Division is evaluated, and the limitations are defined in terms of meeting the present and programmed chemical supply and delivery requirements. A major redesign of the entire chemical mixing, storage, analysis, and supply system is recommended. Other requirements for immediate and future implementations are presented.

  11. Efficiency of Metal Mixing in Dwarf Galaxies

    NASA Astrophysics Data System (ADS)

    Hirai, Yutaka; Saitoh, Takayuki R.

    2017-04-01

    Metal mixing plays a critical role in the enrichment of metals in galaxies. The abundance of elements such as Mg, Fe, and Ba in metal-poor stars helps us understand the metal mixing in galaxies. However, the efficiency of metal mixing in galaxies is not yet understood. Here we report a series of N-body/smoothed particle hydrodynamics simulations of dwarf galaxies with different efficiencies of metal mixing using a turbulence-induced mixing model. We show that metal mixing apparently occurs in dwarf galaxies from Mg and Ba abundances. We find that a scaling factor for metal diffusion larger than 0.01 is necessary to reproduce the measured abundances of Ba in dwarf galaxies. This value is consistent with the value expected from turbulence theory and experiments. We also find that the timescale of metal mixing is less than 40 Myr. This timescale is shorter than the typical dynamical times of dwarf galaxies. We demonstrate that the determination of a degree of scatters of Ba abundance by the observation will help us to better constrain the efficiency of metal mixing.

  12. Mixed Methods Approaches in Family Science Research

    ERIC Educational Resources Information Center

    Plano Clark, Vicki L.; Huddleston-Casas, Catherine A.; Churchill, Susan L.; Green, Denise O'Neil; Garrett, Amanda L.

    2008-01-01

    The complex phenomena of interest to family scientists require the use of quantitative and qualitative approaches. Researchers across the social sciences are now turning to mixed methods designs that combine these two approaches. Mixed methods research has great promise for addressing family science topics, but only if researchers understand the…

  13. "Reading" Mixed Methods Research: Contexts for Criticism

    ERIC Educational Resources Information Center

    Freshwater, Dawn

    2007-01-01

    Health and social care researchers, in their haste to "belong" to academia, have adopted the system of mixed methodology research, overestimating its ability to reveal the truth and occasionally imprisoning their thought in one system. In this article, some of the assumptions underpinning mixed methodology research and its discourse are subjected…

  14. Physical properties of mixed dairy food proteins

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Mixed food protein gels are complex systems, which changes functional behaviors such as gelling properties and viscosity depending on the miscibility of the proteins. We have noted that differences in co-solubility of mixed proteins created unique network structures and gel properties. The effects o...

  15. Quark lepton universality and large leptonic mixing

    NASA Astrophysics Data System (ADS)

    Joshipura, Anjan S.; Smirnov, A. Yu.

    2006-08-01

    A unified description of fermionic mixing is proposed which assumes that in certain basis (i) a single complex unitary matrix V diagonalizes mass matrices of all fermions to the leading order, (ii) the SU(5) relation M=MlT exists between the mass matrices of the down quarks and the charged leptons, and (iii) Md†=M. These assumptions automatically lead to different mixing patterns for quarks and leptons: Quarks remain unmixed to leading order (i.e. V=1) while leptons have non-trivial mixing given by a symmetric unitary matrix VPMNS0=VV. V depends on two physical mixing angles and for values of these angles ˜20°-25° it reproduces the observed mixing patterns rather well. We identify conditions under which the universal mixing V follows from the universal mass matrices of fermions. Relatively small perturbations to the leading order structure lead to the CKM mixing and corrections to VPMNS0. We find that if the correction matrix equals the CKM matrix, the resulting lepton mixing agrees well with data and predicts ()e3>0.08.

  16. Flowmeter determines mix ratio for viscous adhesives

    NASA Technical Reports Server (NTRS)

    Lemons, C. R.

    1967-01-01

    Flowmeter determines mix ratio for continuous flow mixing machine used to produce an adhesive from a high viscosity resin and aliphatic amine hardener pumped through separate lines to a rotary blender. The flowmeter uses strain gages in the two flow paths and monitors their outputs with appropriate instrumentation.

  17. Milestone M4900: Simulant Mixing Analytical Results

    SciTech Connect

    Kaplan, D.I.

    2001-07-26

    This report addresses Milestone M4900, ''Simulant Mixing Sample Analysis Results,'' and contains the data generated during the ''Mixing of Process Heels, Process Solutions, and Recycle Streams: Small-Scale Simulant'' task. The Task Technical and Quality Assurance Plan for this task is BNF-003-98-0079A. A report with a narrative description and discussion of the data will be issued separately.

  18. Mixed Methods Research in School Psychology: A Mixed Methods Investigation of Trends in the Literature

    ERIC Educational Resources Information Center

    Powell, Heather; Mihalas, Stephanie; Onwuegbuzie, Anthony J.; Suldo, Shannon; Daley, Christine E.

    2008-01-01

    This article illustrates the utility of mixed methods research (i.e., combining quantitative and qualitative techniques) to the field of school psychology. First, the use of mixed methods approaches in school psychology practice is discussed. Second, the mixed methods research process is described in terms of school psychology research. Third, the…

  19. Patterns of Age Mixing and Gender Mixing among Children and Adolescents at an Ungraded School.

    ERIC Educational Resources Information Center

    Gray, Peter; Feldman, Jay

    1997-01-01

    Examined age and gender mixing among students, ages 4-19, at an ungraded, self-directed, democratically structured school. Found that age mixing was more frequent for 12- to 15-year-olds than for younger or older students, and that gender mixing was less frequent for 8- to 11-year-olds than for any other age group. (MDM)

  20. Physics of collisionless phase mixing

    SciTech Connect

    Tsiklauri, D.; Haruki, T.

    2008-11-15

    Previous studies of phase mixing of ion cyclotron (IC), Alfvenic, waves in the collisionless regime have established the generation of parallel electric field and hence acceleration of electrons in the regions of transverse density inhomogeneity. However, outstanding issues were left open. Here we use the 2.5 D, relativistic, fully electromagnetic particle-in-cell code and an analytic magnetohydrodynamic (MHD) formulation, to establish the following points: (i) Using the generalized Ohm's law we find that the parallel electric field is supported mostly by the electron pressure tensor, with a smaller contribution from the electron inertia term. (ii) The generated parallel electric field and the fraction of accelerated electrons are independent of the IC wave frequency remaining at a level of six orders of magnitude larger than the Dreicer value and approximately 20%, respectively. The generated parallel electric field and the fraction of accelerated electrons increase with the increase of IC wave amplitude. The generated parallel electric field seems to be independent of plasma beta, while the fraction of accelerated electrons strongly increases with the decrease of plasma beta (for plasma beta of 0.0001 the fraction of accelerated electrons can be as large as 47%). (iii) In the collisionless regime IC wave dissipation length (that is defined as the distance over which the wave damps) variation with the driving frequency shows a deviation from the analytical MHD result, which we attribute to a possible frequency dependence of the effective resistivity. (iv) Effective anomalous resistivity, inferred from our numerical simulations, is at least four orders of magnitude larger than the classical Spitzer value.

  1. The mixed waste management facility

    SciTech Connect

    Streit, R.D.

    1995-10-01

    During FY96, the Mixed Waste Management Facility (MWMF) Project has the following major objectives: (1) Complete Project Preliminary Design Review (PDR). (2) Complete final design (Title II) of MWMF major systems. (3) Coordinate all final interfaces with the Decontamination and Waste Treatment Facility (DWTF) for facility utilities and facility integration. (4) Begin long-lead procurements. (5) Issue Project Baseline Revision 2-Preliminary Design (PB2), modifying previous baselines per DOE-requested budget profiles and cost reduction. Delete Mediated Electrochemical Oxidation (MEO) as a treatment process for initial demonstration. (6) Complete submittal of, and ongoing support for, applications for air permit. (7) Begin detailed planning for start-up, activation, and operational interfaces with the Laboratory`s Hazardous Waste Management Division (HWM). In achieving these objectives during FY96, the Project will incorporate and implement recent DOE directives to maximize the cost savings associated with the DWTF/MWMF integration (initiated in PB1.2); to reduce FY96 new Budget Authority to {approximately}$10M (reduced from FY97 Validation of $15.3M); and to keep Project fiscal year funding requirements largely uniform at {approximately}$10M/yr. A revised Project Baseline (i.e., PB2), to be issued during the second quarter of FY96, will address the implementation and impact of this guidance from an overall Project viewpoint. For FY96, the impact of this guidance is that completion of final design has been delayed relative to previous baselines (resulting from the delay in the completion of preliminary design); ramp-up in staffing has been essentially eliminated; and procurements have been balanced through the Project to help balance budget needs to funding availability.

  2. Dilution Jet Mixing Program, phase 1

    NASA Technical Reports Server (NTRS)

    Srinivasan, R.; Berenfeld, A.; Mongia, H. C.

    1982-01-01

    The effect of jet to mainstream density ratio, flow area convergence as encounted in transition sections, and nonuniform mainstream profile upstream of dilution orifices on the mixing of a row of jets with a confined cross flow was quantified. It is found that: (1) jet spreading rate in transverse direction is increased with increasing J, H/D and with decreasing S/D; (2) the density ratio has only a second order effect on the jet mixing characteristics for a constant momentum ratio; (3) the temperature distributions in the jet mixing region are strongly influenced by the undisturbed mainstream profile; (4) flow area convergence enhances mixing in radial and transverse directions. An asymmetric convergent duct with flat wall injection has the same jet mixing characteristics as a symmetric convergent duct. An asymmetric convergent duct with slant wall injection has a faster jet spreading rate in the transverse direction.

  3. Continuous Microfluidic Mixing Using Pulsatile Micropumps

    NASA Astrophysics Data System (ADS)

    Deshmukh, Ajay; Liepmann, Dorian

    2000-11-01

    For many microfluidic and micro-TAS applications, the mixing of two fluids is required. At small length scales, however, traditional means of mixing, such as turbulence generation, are impossible yet diffusion is often too slow. For laminar mixing, 3 degrees of freedom are required. Since MEMS are normally 2-D, time-dependence is added for the third degree of freedom. This process involves the use of two positive displacement pumps to alternatively deliver two different fluids into a common channel and utilizing Taylor dispersion to mix them. This mixing process was modelled numerically and confirmed via experimental observation of fluorescent dye in a fabricated MEMS mixer. The pumps used in the device are a new design consisting of a bubble-piston and two check valves.

  4. Mixed waste characterization, treatment & disposal focus area

    SciTech Connect

    1996-08-01

    The mission of the Mixed Waste Characterization, Treatment, and Disposal Focus Area (referred to as the Mixed Waste Focus Area or MWFA) is to provide treatment systems capable of treating DOE`s mixed waste in partnership with users, and with continual participation of stakeholders, tribal governments, and regulators. The MWFA deals with the problem of eliminating mixed waste from current and future storage in the DOE complex. Mixed waste is waste that contains both hazardous chemical components, subject to the requirements of the Resource Conservation and Recovery Act (RCRA), and radioactive components, subject to the requirements of the Atomic Energy Act. The radioactive components include transuranic (TRU) and low-level waste (LLW). TRU waste primarily comes from the reprocessing of spent fuel and the use of plutonium in the fabrication of nuclear weapons. LLW includes radioactive waste other than uranium mill tailings, TRU, and high-level waste, including spent fuel.

  5. Thin films of mixed metal compounds

    DOEpatents

    Mickelsen, R.A.; Chen, W.S.

    1985-06-11

    Disclosed is a thin film heterojunction solar cell, said heterojunction comprising a p-type I-III-IV[sub 2] chalcopyrite substrate and an overlying layer of an n-type ternary mixed metal compound wherein said ternary mixed metal compound is applied to said substrate by introducing the vapor of a first metal compound to a vessel containing said substrate from a first vapor source while simultaneously introducing a vapor of a second metal compound from a second vapor source of said vessel, said first and second metals comprising the metal components of said mixed metal compound; independently controlling the vaporization rate of said first and second vapor sources; reducing the mean free path between vapor particles in said vessel, said gas being present in an amount sufficient to induce homogeneity of said vapor mixture; and depositing said mixed metal compound on said substrate in the form of a uniform composition polycrystalline mixed metal compound. 5 figs.

  6. PREFACE Turbulent Mixing and Beyond

    NASA Astrophysics Data System (ADS)

    Abarzhi, Snezhana I.; Gauthier, Serge; Niemela, Joseph J.

    2010-12-01

    The goals of the International Conference 'Turbulent Mixing and Beyond', TMB-2009, are to expose the generic problem of non-equilibrium turbulent processes to a broad scientific community, to promote the development of new ideas in tackling the fundamental aspects of the problem, to assist in the application of novel approaches in a broad range of phenomena, where the turbulent processes occur, and to have a potential impact on technology. The Conference provides the opportunity to bring together researchers from different areas, which include but are not limited to fluid dynamics, plasmas, high energy density physics, astrophysics, material science, combustion, atmospheric and Earth sciences, nonlinear and statistical physics, applied mathematics, probability and statistics, data processing and computations, optics and telecommunications, and to have their attention focused on the long-standing formidable task of non-equilibrium processes. Non-equilibrium turbulent processes play a key role in a broad variety of phenomena spanning astrophysical to atomistic scales and high or low energy density regimes. Inertial confinement and magnetic fusion, light-matter interaction and non-equilibrium heat transfer, strong shocks and explosions, material transformation under high strain rate, supernovae and accretion disks, stellar non-Boussinesq and magneto-convection, planetary interiors and mantle-lithosphere tectonics, premixed and non-premixed combustion, non-canonical wall-bounded flows, hypersonic and supersonic boundary layers, dynamics of atmosphere and oceanography, are just a few examples. A grip on non-equilibrium turbulent processes is crucial for cutting-edge technology such as laser micro-machining, nano-electronics, free-space optical telecommunications, and for industrial applications in the areas of aeronautics and aerodynamics. Non-equilibrium turbulent processes are anisotropic, non-local, multi-scale and multi-phase, and often are driven by shocks or

  7. Nationwide review of mixed and non-mixed components from different manufacturers in total hip arthroplasty

    PubMed Central

    Peters, Rinne M; van Steenbergen, Liza N; Bulstra, Sjoerd K; Zeegers, Adelgunde V C M; Stewart, Roy E; Poolman, Rudolf W; Hosman, Anton H

    2016-01-01

    Background and purpose Combining components from different manufacturers in total hip arthroplasty (THA) is common practice worldwide. We determined the proportion of THAs used in the Netherlands that consist of components from different manufacturers, and compared the revision rates of these mixed THAs with those of non-mixed THAs. Patients and methods Data on primary and revision hip arthroplasty are recorded in the LROI, the nationwide population-based arthroplasty register in the Netherlands. We selected all 163,360 primary THAs that were performed in the period 2007–2014. Based on the manufacturers of the components, 4 groups were discerned: non-mixed THAs with components from the same manufacturer (n = 142,964); mixed stem-head THAs with different manufacturers for the femoral stem and head (n = 3,663); mixed head-cup THAs with different head and cup manufacturers (n = 12,960), and mixed stem-head-cup THAs with different femoral stem, head, and cup manufacturers (n = 1,773). Mixed prostheses were defined as THAs (stem, head, and cup) composed of components made by different manufacturers. Results 11% of THAs had mixed components (n = 18,396). The 6-year revision rates were similar for mixed and non-mixed THAs: 3.4% (95% CI: 3.1w–3.7) for mixed THAs and 3.5% (95% CI: 3.4–3.7) for non-mixed THAs. Revision of primary THAs due to loosening of the acetabulum was more common in mixed THAs (16% vs. 12%). Interpretation Over an 8-year period in the Netherlands, 11% of THAs had mixed components—with similar medium-term revision rates to those of non-mixed THAs. PMID:27348544

  8. Evaluation of a metering, mixing, and dispensing system for mixing polysulfide adhesive

    NASA Technical Reports Server (NTRS)

    Evans, Kurt B.

    1989-01-01

    Tests were performed to evaluate whether a metered mixing system can mix PR-1221 polysulfide adhesive as well as or better than batch-mixed adhesive; also, to evaluate the quality of meter-mixed PR-1860 and PS-875 polysulfide adhesives. These adhesives are candidate replacements for PR-1221 which will not be manufactured in the future. The following material properties were evaluated: peel strength, specific gravity and adhesive components of mixed adhesives, Shore A hardness, tensile adhesion strength, and flow rate. Finally, a visual test called the butterfly test was performed to observe for bubbles and unmixed adhesive. The results of these tests are reported and discussed.

  9. Mixed Waste Integrated Program: A technology assessment for mercury-containing mixed wastes

    SciTech Connect

    Perona, J.J.; Brown, C.H.

    1993-03-01

    The treatment of mixed wastes must meet US Environmental Protection Agency (EPA) standards for chemically hazardous species and also must provide adequate control of the radioactive species. The US Department of Energy (DOE) Office of Technology Development established the Mixed Waste Integrated Program (MWIP) to develop mixed-waste treatment technology in support of the Mixed Low-Level Waste Program. Many DOE mixed-waste streams contain mercury. This report is an assessment of current state-of-the-art technologies for mercury separations from solids, liquids, and gases. A total of 19 technologies were assessed. This project is funded through the Chemical-Physical Technology Support Group of the MWIP.

  10. Mixing in microfluidic devices and enhancement methods

    PubMed Central

    Ward, Kevin; Fan, Z Hugh

    2015-01-01

    Mixing in microfluidic devices presents a challenge due to laminar flows in microchannels, which result from low Reynolds numbers determined by the channel’s hydraulic diameter, flow velocity, and solution’s kinetic viscosity. To address this challenge, novel methods of mixing enhancement within microfluidic devices have been explored for a variety of applications. Passive mixing methods have been created, including those using ridges or slanted wells within the microchannels, as well as their variations with improved performance by varying geometry and patterns, by changing the properties of channel surfaces, and by optimization via simulations. In addition, active mixing methods including microstirrers, acoustic mixers, and flow pulsation have been investigated and integrated into microfluidic devices to enhance mixing in a more controllable manner. In general, passive mixers are easy to integrate, but difficult to control externally by users after fabrication. Active mixers usually take efforts to integrate within a device and they require external components (e.g. power sources) to operate. However, they can be controlled by users to a certain degree for tuned mixing. In this article, we provide a general overview of a number of passive and active mixers, discuss their advantages and disadvantages, and make suggestions on choosing a mixing method for a specific need as well as advocate possible integration of key elements of passive and active mixers to harness the advantages of both types. PMID:26549938

  11. Mixing in colliding, ultrasonically levitated drops.

    PubMed

    Chainani, Edward T; Choi, Woo-Hyuck; Ngo, Khanh T; Scheeline, Alexander

    2014-02-18

    Lab-in-a-drop, using ultrasonic levitation, has been actively investigated for the last two decades. Benefits include lack of contact between solutions and an apparatus and a lack of sample cross-contamination. Understanding and controlling mixing in the levitated drop is necessary for using an acoustically levitated drop as a microreactor, particularly for studying kinetics. A pulsed electrostatic delivery system enables addition and mixing of a desired-volume droplet with the levitated drop. Measurement of mixing kinetics is obtained by high-speed video monitoring of a titration reaction. Drop heterogeneity is visualized as 370 nl of 0.25 M KOH (pH: 13.4) was added to 3.7 μL of 0.058 M HCl (pH: 1.24). Spontaneous mixing time is about 2 s. Following droplet impact, the mixed drop orbits the levitator axis at about 5 Hz during homogenization. The video's green channel (maximum response near 540 nm) shows the color change due to phenolphthalein absorption. While mixing is at least an order of magnitude faster in the levitated drop compared with three-dimensional diffusion, modulation of the acoustic waveform near the surface acoustic wave resonance frequency of the levitated drop does not substantially reduce mixing time.

  12. Rate of chaotic mixing in localized flows

    NASA Astrophysics Data System (ADS)

    Jop, Pierre; Boujlel, Jalila; Gouillart, Emmanuelle; Pigeonneau, Franck; Surface du Verre et Interfaces Team

    2016-11-01

    Most of the pastes in building materials are yield-stress fluids. Mixing them efficiently is required for industrial processes but linking the rate of the mixing to the fluid properties is a challenge. We study experimentally the rate of chaotic mixing in viscoplastic fluids by using a rod-stirring protocol with a rotating vessel. Only a limited zone localized around the stirring rods is highly sheared at a given time. Using a dyed spot as the initial condition, we measure the decay of concentration fluctuations of dye as mixing proceeds. Due to numerical simulations and experimental measurements, we relate the volume of highly sheared fluid to the parameters of the flow. We propose a quantitative two-zone model for the mixing rate, taking into account the geometry of the highly sheared zone as well as the rate at which fluid is renewed inside this zone. The model predicts correctly the scaling of the exponential mixing rates during a first rapid stage and a second slower one. Moreover we show that an optimal mixing exists when varying the ratio of the rotation rate of the vessel and the velocity of the rods. French ANR (ANR-11-JS09-015).

  13. Mixing in microfluidic devices and enhancement methods.

    PubMed

    Ward, Kevin; Fan, Z Hugh

    2015-09-01

    Mixing in microfluidic devices presents a challenge due to laminar flows in microchannels, which result from low Reynolds numbers determined by the channel's hydraulic diameter, flow velocity, and solution's kinetic viscosity. To address this challenge, novel methods of mixing enhancement within microfluidic devices have been explored for a variety of applications. Passive mixing methods have been created, including those using ridges or slanted wells within the microchannels, as well as their variations with improved performance by varying geometry and patterns, by changing the properties of channel surfaces, and by optimization via simulations. In addition, active mixing methods including microstirrers, acoustic mixers, and flow pulsation have been investigated and integrated into microfluidic devices to enhance mixing in a more controllable manner. In general, passive mixers are easy to integrate, but difficult to control externally by users after fabrication. Active mixers usually take efforts to integrate within a device and they require external components (e.g. power sources) to operate. However, they can be controlled by users to a certain degree for tuned mixing. In this article, we provide a general overview of a number of passive and active mixers, discuss their advantages and disadvantages, and make suggestions on choosing a mixing method for a specific need as well as advocate possible integration of key elements of passive and active mixers to harness the advantages of both types.

  14. Mixing in microfluidic devices and enhancement methods

    NASA Astrophysics Data System (ADS)

    Ward, Kevin; Fan, Z. Hugh

    2015-09-01

    Mixing in microfluidic devices presents a challenge due to laminar flows in microchannels, which result from low Reynolds numbers determined by the channel’s hydraulic diameter, flow velocity, and solution’s kinetic viscosity. To address this challenge, novel methods of mixing enhancement within microfluidic devices have been explored for a variety of applications. Passive mixing methods have been created, including those using ridges or slanted wells within the microchannels, as well as their variations with improved performance by varying geometry and patterns, by changing the properties of channel surfaces, and by optimization via simulations. In addition, active mixing methods including microstirrers, acoustic mixers, and flow pulsation have been investigated and integrated into microfluidic devices to enhance mixing in a more controllable manner. In general, passive mixers are easy to integrate, but difficult to control externally by users after fabrication. Active mixers usually take efforts to integrate within a device and they require external components (e.g. power sources) to operate. However, they can be controlled by users to a certain degree for tuned mixing. In this article, we provide a general overview of a number of passive and active mixers, discuss their advantages and disadvantages, and make suggestions on choosing a mixing method for a specific need as well as advocate possible integration of key elements of passive and active mixers to harness the advantages of both types.

  15. Finishing bacterial genome assemblies with Mix

    PubMed Central

    2013-01-01

    Motivation Among challenges that hamper reaping the benefits of genome assembly are both unfinished assemblies and the ensuing experimental costs. First, numerous software solutions for genome de novo assembly are available, each having its advantages and drawbacks, without clear guidelines as to how to choose among them. Second, these solutions produce draft assemblies that often require a resource intensive finishing phase. Methods In this paper we address these two aspects by developing Mix , a tool that mixes two or more draft assemblies, without relying on a reference genome and having the goal to reduce contig fragmentation and thus speed-up genome finishing. The proposed algorithm builds an extension graph where vertices represent extremities of contigs and edges represent existing alignments between these extremities. These alignment edges are used for contig extension. The resulting output assembly corresponds to a set of paths in the extension graph that maximizes the cumulative contig length. Results We evaluate the performance of Mix on bacterial NGS data from the GAGE-B study and apply it to newly sequenced Mycoplasma genomes. Resulting final assemblies demonstrate a significant improvement in the overall assembly quality. In particular, Mix is consistent by providing better overall quality results even when the choice is guided solely by standard assembly statistics, as is the case for de novo projects. Availability Mix is implemented in Python and is available at https://github.com/cbib/MIX, novel data for our Mycoplasma study is available at http://services.cbib.u-bordeaux2.fr/mix/. PMID:24564706

  16. Incomplete Mixing in a Small, Urban stream

    NASA Astrophysics Data System (ADS)

    Ryan, R. J.; Boufadel, M. C.

    2006-05-01

    Conservative solute tracer experiments were conducted in Indian Creek, a small urban stream located in Philadelphia, Pennsylvania, USA. Estimated flow rates were between 46 L s-1 and 81 L s-1, average stream width was 5.5 m and average stream depth was 0.2 m. Given these dimensions, most researchers would think it reasonable to assume that the stream is completely mixed vertically and horizontally. However, we found that the stream was not vertically completely mixed in a 0.95 m deep, 30 m long pool. The limited mixing was demonstrated by the vertical stratification of a tracer cloud which was completely mixed both laterally and vertically across the stream prior to entering the pool. We suggest that the cause of limited mixing is due to a balance between groundwater inflow and transverse dispersion at the cross section. We show that the unsupported assumption of complete mix may result in a wide range, and thus increased uncertainty, of the values of stream flow and longitudinal dispersion coefficient estimated from these data. We conclude that the assumption of complete mix and one-dimensional modeling must be checked against actual field conditions, even in small streams.

  17. B mixing and flavor tagging at CDF

    SciTech Connect

    Russ, James S.; /Carnegie Mellon U.

    2004-12-01

    The CDF Collaboration has made a preliminary measurement of B{sub d} mixing as a first step toward measuring mixing in the B{sub s} system. Flavor tagging using opposite-side jets and muons as well as same-side tagging schemes have been applied. Results agree well with precise results from the B-factories. They use these results to estimate CDF's B{sub s} mixing range using the present data set ({approx} 250 pb{sup -1}) and extrapolate to the potential from larger data sets in future running.

  18. A gas mixing device for MOCVD

    NASA Astrophysics Data System (ADS)

    Blaauw, C.; Miner, C. J.

    1987-08-01

    Epitaxial layers of Ga zIn 1- zAs have been grown in a horizontal, low pressure metalorganic chemical vapour deposition reactor, using a mixing manifold of radial symmetry. The effect of the inlet configuration of the reactant gases on the compositional uniformity of the layers has been investigated by photoluminescence spectroscopy. It was found that incomplete gas phase mixing of the reactants resulted in poor uniformity of the grown layers. By incorporating a mixing device in the gas line, which imparted a rotational component to the gas flow, epitaxial layer uniformities were markedly improved.

  19. Cutaneous mucinosis in mixed connective tissue disease.

    PubMed

    Favarato, Maria Helena Sampaio; Miranda, Sofia Silveira de Castro; Caleiro, Maria Teresa Correia; Assad, Ana Paula Luppino; Halpern, Ilana; Fuller, Ricardo

    2013-01-01

    Cutaneous mucinosis is a group of conditions involving an accumulation of mucin or glycosaminoglycan in the skin and its annexes. It is described in some connective tissue diseases but never in association with mixed connective tissue disease. This report concerns two cases of cutaneous mucinosis in patients with mixed connective tissue disease in remission; one patient presented the papular form, and the other reticular erythematous mucinosis. These are the first cases of mucinosis described in mixed connective tissue disease. Both cases had skin lesions with no other clinical or laboratorial manifestations, with clinical response to azathioprine in one, and to an association of chloroquine and prednisone in the other.

  20. Dilution jet mixing program, phase 3

    NASA Technical Reports Server (NTRS)

    Srinivasan, R.; Coleman, E.; Myers, G.; White, C.

    1985-01-01

    The main objectives for the NASA Jet Mixing Phase 3 program were: extension of the data base on the mixing of single sided rows of jets in a confined cross flow to discrete slots, including streamlined, bluff, and angled injections; quantification of the effects of geometrical and flow parameters on penetration and mixing of multiple rows of jets into a confined flow; investigation of in-line, staggered, and dissimilar hole configurations; and development of empirical correlations for predicting temperature distributions for discrete slots and multiple rows of dilution holes.

  1. Cutaneous mucinosis in mixed connective tissue disease*

    PubMed Central

    Favarato, Maria Helena Sampaio; Assad, Ana Paula Luppino; Miranda, Sofia Silveira de Castro; Halpern, Ilana; Caleiro, Maria Teresa Correia; Fuller, Ricardo

    2013-01-01

    Cutaneous mucinosis is a group of conditions involving an accumulation of mucin or glycosaminoglycan in the skin and its annexes. It is described in some connective tissue diseases but never in association with mixed connective tissue disease. This report concerns two cases of cutaneous mucinosis in patients with mixed connective tissue disease in remission; one patient presented the papular form, and the other reticular erythematous mucinosis. These are the first cases of mucinosis described in mixed connective tissue disease. Both cases had skin lesions with no other clinical or laboratorial manifestations, with clinical response to azathioprine in one, and to an association of chloroquine and prednisone in the other. PMID:24068142

  2. Strong intrinsic mixing in vortex magnetic fields.

    PubMed

    Martin, James E; Shea-Rohwer, Lauren; Solis, Kyle J

    2009-07-01

    We report a method of magnetic mixing wherein a "vortex" magnetic field applied to a suspension of magnetic particles creates strong homogeneous mixing throughout the fluid volume. Experiments designed to elucidate the microscopic mechanism of mixing show that the torque is quadratic in the field, decreases with field frequency, and is optimized at a vortex field angle of approximately 55 degrees . Theory and simulations indicate that the field-induced formation of volatile particle chains is responsible for these phenomena. This technique has applications in microfluidic devices and is ideally suited to applications such as accelerating the binding of target biomolecules to biofunctionalized magnetic microbeads.

  3. Microbiology: Mixing Wine, Chocolate, and Coffee.

    PubMed

    Goddard, Matthew R

    2016-04-04

    Yeasts associated with cocoa and coffee beans are genetically distinct. These populations have been created through the migration and mixing of populations associated with vineyards, trees in America, and the ancestral seat of this species in Far East Asia.

  4. [Determination of taste sensitivity with mixed solutions].

    PubMed

    Marco Algarra, R

    1990-01-01

    In the second part of our study we present the results of the mixture of four basic tastes in comparison with those of the simple solutions, mea ng as well the fatigue phenomenon with the mixed solutions.

  5. A colorimetric reaction to quantify fluid mixing

    NASA Astrophysics Data System (ADS)

    Oates, Peter M.; Harvey, Charles F.

    2006-11-01

    We found the colorimetric reaction of Tiron (1,2-dihydroxybenzene-3,5-disulfonic acid) and molybdate suitable for optical quantification of chemical reaction during fluid-fluid mixing in laboratory chambers. This reaction consists of two colorless reagents that mix to rapidly form colored, stable, soluble products. These products can be digitally imaged and quantified using light absorbance to study fluid-fluid mixing. Here we provide a model and equilibrium constants for the relevant complexation reactions. We also provide methods for relating light absorbance to product concentrations. Practical implementation issues of this reaction are discussed and an example of imaged absorbances for fluid-fluid mixing in heterogeneous porous media is given.

  6. Harmful Interactions: Mixing Alcohol with Medicines

    MedlinePlus

    ... Interactions Print version Harmful Interactions Mixing Alcohol With Medicines You’ve probably seen this warning on medicines ... falls and serious injuries, especially among older people. Medicines may have many ingredients Some medications—including many ...

  7. Mixing lengths scaling in a gravity flow

    SciTech Connect

    Ecke, Robert E; Rivera, Micheal; Chen, Jun; Ecke, Robert E

    2009-01-01

    We present an experimental study of the mixing processes in a gravity current. The turbulent transport of momentum and buoyancy can be described in a very direct and compact form by a Prandtl mixing length model [1]: the turbulent vertical fluxes of momentum and buoyancy are found to scale quadraticatly with the vertical mean gradients of velocity and density. The scaling coefficient is the square of the mixing length, approximately constant over the mixing zone of the stratified shear layer. We show in this paper how, in different flow configurations, this length can be related to the shear length of the flow {radical}({var_epsilon}/{partial_derivative}{sub z}u{sup 3}).

  8. Laboratory studies of ocean mixing by microorganisms

    NASA Astrophysics Data System (ADS)

    Martinez-Ortiz, Monica; Dabiri, John O.

    2011-11-01

    Ocean mixing plays a major role in nutrient and energy transport and is an important input to climate models. Recent studies suggest that the contribution of fluid transport by swimming microorganisms to ocean mixing may be of the same order of magnitude as winds and tides. An experimental setup has been designed in order to study the mixing efficiency of vertical migration of plankton. To this end, a stratified water column is created to model the ocean's density gradient. The vertical migration of Artemia Salina (brine shrimp) within the water column is controlled via luminescent signals on the top and bottom of the column. By fluorescently labelling portions of the water column, the stirring of the density gradient by the animals is visualized and quantified. Preliminary results show that the vertical movement of these organisms produces enhanced mixing relative to control cases in which only buoyancy forces and diffusion are present.

  9. Hawaii Ocean Mixing Experiment: Program Summary

    NASA Technical Reports Server (NTRS)

    Ray, Richard D.; Chao, Benjamin F. (Technical Monitor)

    2002-01-01

    It is becoming apparent that insufficient mixing occurs in the pelagic ocean to maintain the large scale thermohaline circulation. Observed mixing rates fall a factor of ten short of classical indices such as Munk's "Abyssal Recipe." The growing suspicion is that most of the mixing in the sea occurs near topography. Exciting recent observations by Polzin et al., among others, fuel this speculation. If topographic mixing is indeed important, it must be acknowledged that its geographic distribution, both laterally and vertically, is presently unknown. The vertical distribution of mixing plays a critical role in the Stommel Arons model of the ocean interior circulation. In recent numerical studies, Samelson demonstrates the extreme sensitivity of flow in the abyssal ocean to the spatial distribution of mixing. We propose to study the topographic mixing problem through an integrated program of modeling and observation. We focus on tidally forced mixing as the global energetics of this process have received (and are receiving) considerable study. Also, the well defined frequency of the forcing and the unique geometry of tidal scattering serve to focus the experiment design. The Hawaiian Ridge is selected as a study site. Strong interaction between the barotropic tide and the Ridge is known to take place. The goals of the Hawaiian Ocean Mixing Experiment (HOME) are to quantify the rate of tidal energy loss to mixing at the Ridge and to identify the mechanisms by which energy is lost and mixing generated. We are challenged to develop a sufficiently comprehensive picture that results can be generalized from Hawaii to the global ocean. To achieve these goals, investigators from five institutions have designed HOME, a program of historic data analysis, modeling and field observation. The Analysis and Modeling efforts support the design of the field experiments. As the program progresses, a global model of the barotropic (depth independent) tide, and two models of the

  10. Plasma kinetic effects on interfacial mix

    NASA Astrophysics Data System (ADS)

    Yin, L.; Albright, B. J.; Taitano, W.; Vold, E. L.; Chacon, L.; Simakov, A. N.

    2016-11-01

    Mixing at interfaces in dense plasma media is a problem central to inertial confinement fusion and high energy density laboratory experiments. In this work, collisional particle-in-cell simulations are used to explore kinetic effects arising during the mixing of unmagnetized plasma media. Comparisons are made to the results of recent analytical theory in the small Knudsen number limit and while the bulk mixing properties of interfaces are in general agreement, some differences arise. In particular, "super-diffusive" behavior, large diffusion velocity, and large Knudsen number are observed in the low density regions of the species mixing fronts during the early evolution of a sharp interface prior to the transition to a slow diffusive process in the small-Knudsen-number limit predicted by analytical theory. A center-of-mass velocity profile develops as a result of the diffusion process and conservation of momentum.

  11. Mixed waste minimization in a research environment

    SciTech Connect

    Kirner, N.

    1994-12-31

    This presentation describes minimization efforts and processes for mixed waste generated by research facilities. Waste stream assessment and treatment, and database management for various research-related waste streams is detailed.

  12. Hardy's criterion of nonlocality for mixed states

    SciTech Connect

    Ghirardi, GianCarlo; Marinatto, Luca

    2006-03-15

    We generalize Hardy's proof of nonlocality to the case of bipartite mixed statistical operators, and we exhibit a necessary condition which has to be satisfied by any given mixed state {sigma} in order that a local and realistic hidden variable model exists which accounts for the quantum mechanical predictions implied by {sigma}. Failure of this condition will imply both the impossibility of any local explanation of certain joint probability distributions in terms of hidden variables and the nonseparability of the considered mixed statistical operator. Our result can be also used to determine the maximum amount of noise, arising from imperfect experimental implementations of the original Hardy's proof of nonlocality, in presence of which it is still possible to put into evidence the nonlocal features of certain mixed states.

  13. Mixing Times in Evolutionary Game Dynamics

    NASA Astrophysics Data System (ADS)

    Black, Andrew J.; Traulsen, Arne; Galla, Tobias

    2012-07-01

    Without mutation and migration, evolutionary dynamics ultimately leads to the extinction of all but one species. Such fixation processes are well understood and can be characterized analytically with methods from statistical physics. However, many biological arguments focus on stationary distributions in a mutation-selection equilibrium. Here, we address the mixing time required to reach stationarity in the presence of mutation. We show that mixing times in evolutionary games have the opposite behavior from fixation times when the intensity of selection increases: in coordination games with bistabilities, the fixation time decreases, but the mixing time increases. In coexistence games with metastable states, the fixation time increases, but the mixing time decreases. Our results are based on simulations and the Wentzel-Kramers-Brillouin approximation of the master equation.

  14. Neutrino masses, mixing, moments, and matter

    SciTech Connect

    Marciano, W.J.

    1988-01-01

    The present status of neutrino masses, mixing, and electromagnetic moments is surveyed. Potential enhancements of neutrino oscillations, decay, and spin-flavor precession due to their interactions with matter are described.

  15. Helicity in supercritical temporal mixing layers

    NASA Technical Reports Server (NTRS)

    Bellan, J.; Okong'o, N.

    2003-01-01

    Databases of transitional states obtained from Direct Numerical Simulations (DNS) of temporal, supercritical mixing layers for two species systems, 02/H2 and C7Hle/N2, are analyzed to elucidate species-specific turbulence aspects.

  16. Chaotic Mixing of Granitic and Basaltic Liquids

    NASA Astrophysics Data System (ADS)

    Decampos, C.; Ingrisch, W. E.; Perugini, D.; Dingwell, D. B.; Poli, G.

    2008-12-01

    Chaotic mixing in magma chambers may play a central role in determining the timing and dynamics of volcanic eruptions. The dynamics of such chaotic mixing has been investigated solely in analog systems and in numerical simulations to date. Here we report the first experimental study of the dynamics of chaotic mixing in molten silicates of geological relevance. A newly developed device for the simulation of chaotic dynamics has been successfully employed for this purpose. Its development is based on the importance of chaotic dynamics for mixing processes; and previous studies evidencing that chaotic dynamics could equally control magma mixing processes in nature (Perugini et al., 2006. EPSL, 234: 669-680 and references therein). The special device for chaotic mixing silicate melts at high temperatures (up to 1700°C) has been built after the journal-bearing or eccentric-cylinder geometry for viscous fluids for the study of chaotic mixing in slow flows (Swanson and Ottino, 1990. J. Fluid Mech., 213:227-249). In order to generate chaos in a flow, the streamlines must be time dependent, resulting from alternating movements between the two cylinders. The mixing experiments were performed using end-members of: haplogranite [In wt.%: SiO2(71.6), Al2O3(12.4), Na2O(7.0), K2O(9.0)] and haplobasalt [SiO2(48.6), Al2O3(16.3), CaO(23.8), MgO (11.4)]. The haplogranite was doped with trace amounts of Rb, Sr, Ba, Zr and REE oxides. The experimental protocol started with a single run of alternating movements of spindle and crucible. It lasted for 110 minutes at a temperature of 1400°C. The experiment terminated by stopping all movement and letting the sample cool to room temperature. A cylinder of the resultant mixed glassy sample was recovered by drilling. Horizontal sections of this cylinder at varying heights were prepared for microprobe and ICP-MS- Laser Ablation analyses. Preliminary optical and microprobe studies reveal crystal-free filaments of intermediary compositions

  17. Enhanced Mixing in a Rectangular Duct

    NASA Technical Reports Server (NTRS)

    Liscinsky, D. S.; True, B.

    2003-01-01

    An experimental investigation of the mixing of non-reacting opposed rows of jets injected normal to a confined rectangular crossflow has been conducted. Planar Mie-scattering was used to measure the time-average concentration distribution of the jet fluid in planes perpendicular to the duct axis. Particular emphasis was placed on the study of closely spaced orifice configurations applicable to the mixing zone of an RQL combustor. Baseline studies were performed of mixing under "ideal" conditions, i.e., plenum fed jets injecting into a crossflow uniform in velocity and turbulence intensity. In addition, more practical ("non-ideal") issues encountered during hardware design were also studied. As in other studies, mixing effectiveness, determined using a spatial unmixedness parameter based on the variance of mean jet concentration distributions, was found to be optimum when the spacing-to-duct-height ratio was inversely proportional to the square root of the jet-to-mainstream momentum-flux ratio. This relationship is suitable for design under ideal flow conditions. Inlet flow boundary conditions of the jet and approach flow (mainstream) were found to strongly influence mixing performance, but no attempt was made to determine optimum performance under non-ideal conditions. The tests performed do offer some guidance as to expected mixing behavior for several common variables likely to be imposed by hardware constraints. Additionally, in this study it was found that for rows of orifices with opposite centerlines inline, mixing was similar for blockages up to 89 percent (previous crossflow mixing studies concerned with dilution zone configurations, blockages were typically less than 50 percent). Lower levels of unmixedness were obtained as a function of downstream location when axial injection length was minimized. Mixing may be enhanced if orifice centerlines of opposed rows are staggered, but blockage must be =50 percent in this configuration. Round hole and "square

  18. Mixed Mode for Group 4 Facsimile Systems.

    DTIC Science & Technology

    1983-11-07

    Ef110rnt barn Repel) I&. SUPPLISKINTANY NOTIES ILSay WE on"S (CoutMe eawrae side so eey~u MW Aftudp Are o nmber) Mixed Mode, Facsimile, Group 4...Mode machine to transmit messages to, or receive messages from - - such existing machines as: (1) TELETEX (2) Standard Group 4 FACSIMILE, without mixed...mode capabilities (3) Group 3 FACSIMILE Changes to these machines are not considered permissible because they are already in the field; rather, here

  19. Supersonic mixing and combustion in scramjets

    NASA Technical Reports Server (NTRS)

    Northam, G. B.; Capriotti, D. P.; Byington, C. S.; Greenberg, I.

    1991-01-01

    Experimental and theoretical studies are being conducted to explore techniques to enhance mixing in scramjet combustors using parallel fuel injection from the base of swept and unswept wall-mounted ramps. The experiments reported herein were conducted using Mach 2 and 3 combustor inlet conditions. Supporting computational and cold flow studies indicated that the observed enhanced mixing for the swept ramp configuration is primarily due to the substantially higher degree of vorticity and entrainment generated by the swept trailing edges.

  20. Microwave mixing with niobium variable thickness bridges

    NASA Technical Reports Server (NTRS)

    Wang, L.-K.; Callegari, A.; Deaver, B. S., Jr.

    1977-01-01

    Niobium thin-film bridges 300-A thick, 1-micron wide, and 0.5-micron long joining two bulk films 5000-A thick and having normal resistance of the order of 1 ohm have been fabricated and used for microwave mixing at 10 GHz. They exhibit Josephson, bolometric, and multiple-flux-flow mixing and have useful response at 100-200 GHz. The data show in a direct way limitations imposed by flux flow and heating.

  1. Quick-Mixing Studies Under Reacting Conditions

    NASA Technical Reports Server (NTRS)

    Leong, May Y.; Samuelsen, G. S.

    1996-01-01

    The low-NO(x) emitting potential of rich-burn/quick-mix/lean-burn )RQL) combustion makes it an attractive option for engines of future stratospheric aircraft. Because NO(x) formation is exponentially dependent on temperature, the success of the RQL combustor depends on minimizing high temperature stoichiometric pocket formation in the quick-mixing section. An experiment was designed and built, and tests were performed to characterize reaction and mixing properties of jets issuing from round orifices into a hot, fuel-rich crossflow confined in a cylindrical duct. The reactor operates on propane and presents a uniform, non-swirling mixture to the mixing modules. Modules consisting of round orifice configurations of 8, 9, 10, 12, 14, and 18 holes were evaluated at a momentum-flux ratio of 57 and jet-to-mainstream mass-flaw ratio of 2.5. Temperatures and concentrations of O2, CO2, CO, HC, and NO(x) were obtained upstream, down-stream, and within the orifice plane to determine jet penetration as well as reaction processes. Jet penetration was a function of the number of orifices and affected the mixing in the reacting system. Of the six configurations tested, the 14-hole module produced jet penetration close to the module half-radius and yielded the best mixing and most complete combustion at a plane one duct diameter from the orifice leading edge. The results reveal that substantial reaction and heat release occur in the jet mixing zone when the entering effluent is hot and rich, and that the experiment as designed will serve to explore satisfactorily jet mixing behavior under realistic reacting conditions in future studies.

  2. Mixing gasdynamic laser with nonequilibrium arc excitation

    NASA Astrophysics Data System (ADS)

    Antonov, G. G.; Kovshechnikov, V. B.; Rutberg, F. G.

    2016-05-01

    A mixing gasdynamic laser with nonuniform arc excitation is investigated using a model setup. Tentative analysis of the results indicates the appropriateness of using plasmatrons to improve the efficiency of mixing gasdynamic lasers by making carbon dioxide molecules vibrationally more nonuniform. In addition, a plasmatron serves as a preionization source both for a fast-flow gas-discharge laser and for a gasdynamic laser with combined pumping.

  3. Nonadditive Mixed State Phases in Neutron Optics

    SciTech Connect

    Klepp, J.; Sponar, S.; Filipp, S.; Lettner, M.; Badurek, G.; Hasegawa, Y.

    2009-03-10

    In a neutron polarimetry experiment mixed neutron spin phases are determined. We consider evolutions leading to purely geometric, purely dynamical and combined phases. It is experimentally demonstrated that the sum of the geometric and dynamical phases--both obtained in separate measurements--is not equal to the associated total phase as obtained from a third measurement, unless the system is in a pure state. In this sense, mixed state phases are not additive.

  4. Mixed oxide nanoparticles and method of making

    DOEpatents

    Lauf, Robert J.; Phelps, Tommy J.; Zhang, Chuanlun; Roh, Yul

    2002-09-03

    Methods and apparatus for producing mixed oxide nanoparticulates are disclosed. Selected thermophilic bacteria cultured with suitable reducible metals in the presence of an electron donor may be cultured under conditions that reduce at least one metal to form a doped crystal or mixed oxide composition. The bacteria will form nanoparticles outside the cell, allowing easy recovery. Selection of metals depends on the redox potentials of the reducing agents added to the culture. Typically hydrogen or glucose are used as electron donors.

  5. Entry Times Distribution for Mixing Systems

    NASA Astrophysics Data System (ADS)

    Haydn, N.; Yang, F.

    2016-04-01

    We consider the return times dynamics to Bowen balls for continuous maps on metric spaces which have invariant probability measures with certain mixing properties. These mixing properties are satisfied for instance by systems that allow Young tower constructions. We show that the higher order return times to Bowen balls are in the limit Poisson distributed. We also provide a general result for the asymptotic behavior of the recurrence time for Bowen balls for ergodic systems and those with specification.

  6. Convective stretching and applications to mantle mixing

    NASA Astrophysics Data System (ADS)

    Conjeepurm Subramanian, Natarajan

    In this dissertation I have developed a method to quantify the stretching and orientation of infinitesimal strain ellipsoids in three-dimensional, incompressible, and unsteady flow fields. The method is used to study the mixing properties of various mantle-like flows. Chapter 1 provides a introduction to the dissertation. In Chapter 2, I discuss the mixing properties of a three-dimensional, unsteady flow in which the time dependence and three-dimensionality of the flow can be varied independently. It is found that the time dependance of the flow is a more important control on mixing. In Chapter 3, I discuss the mixing properties in a plate-driven model of mantle convection which generates both toroidal, and poloidal components in the velocity field. It is found that as the toroidal energy in the flow is increased to match the poloidal energy, the mixing becomes more homogeneous. Computing the frequency-size distribution of the stretching experienced by the heterogeneities it is found that the marble cake structure is the most likely structure for the upper mantle. In Chapter 4, I discuss the mixing properties of iso-viscous, steady, thermal convection models at infinite Prandtl number. It is found that the strain rate in these models scales uniformly as Ra-0.55. The strain rate scaling law was used to compute the mixing time in the models. The mixing time for these models was computed as ˜ 410 My for whole mantle convection and ˜ 25 My for layered mantle convection for Ra = 1x108 and ˜ 1.4 By and ˜ 100 My for Ra = 1 x 107. As in the previous chapter, the frequency size distribution corresponding to the stretching values indicates a marble cake structure for the upper mantle. In Chapter 5, I conclude the dissertation.

  7. Quantum Darwinism for mixed-state environment

    NASA Astrophysics Data System (ADS)

    Quan, Haitao; Zwolak, Michael; Zurek, Wojciech

    2009-03-01

    We exam quantum darwinism when a system is in the presence of a mixed environment, and we find a general relation between the mutual information for the mixed-state environment and the change of the entropy of the fraction of the environment. We then look at a particular solvable model, and we numerically exam the time evolution of the ``mutual information" for large environment. Finally we discuss about the exact expressions for all entropies and the mutual information at special time.

  8. Techniques for Bs Mixing at CDF

    SciTech Connect

    Salamanna, Giuseppe; /Rome U. /INFN, Rome

    2005-12-01

    The techniques used to perform a measurement of the mixing frequency of the B{sub s} meson ({Delta}M{sub s}) with the CDF detector at the TeVatron collider are described. Particular stress is put on CDF techniques for flavor tagging, which is possibly the major issue for mixing measurements at a hadron collider. Also CDF performances on lifetime and final state reconstruction are described. The final result of the amplitude scanning presented at 2005 Winter Conferences is reported.

  9. Chemical Reactions in Turbulent Mixing Flows

    DTIC Science & Technology

    1993-07-15

    investigations of turbulent mixing, chemical reaction and combustion processes in turbulent, subsonic and supersonic flows. The program was comprised of...34) n•4I Abstract The purpose of this research is to conduct fundamental investigations of tur- bulent mixing, chemical reaction and combustion processes ...Another issue to consider is that different data- processing used on the different sets of data might result in differences between sets of data. To this end

  10. Transversal mixing in the gastrointestinal tract

    NASA Astrophysics Data System (ADS)

    Vainchtein, Dmitri; Orthey, Perry; Parkman, Henry

    2015-11-01

    We discuss results of numerical simulations and analytical modeling of transversal intraluminal mixing in the GI tract produced by segmentation and peristaltic contractions. Particles that start in different parts of the small intestine are traced over several contractions and mixing is described using the particles' probability distribution function. We show that there is optimal set of parameters of contractions, such as the depth and frequency, that produces the most efficient mixing. We show that contractions create well-defined advection patterns in transversal direction. The research is inspired by several applications. First, there is the study of bacteria populating the walls of the intestine, which rely on fluid mixing for nutrients. Second, there are gastrointestinal diseases, such as Crohn's disease, which can be treated effectively using a drug delivery capsule through GI tract, for which it is needed to know how long it takes for a released drug to reach the intestinal wall. And finally, certain neurological and muscular deceases change the parameters of contractions, thus reducing the efficiency of mixing. Understanding an admissible range of the parameters (when mixing is still sufficient for biological purposes) may indicate when the medical action is required.

  11. Charm CP violation and mixing at Belle

    NASA Astrophysics Data System (ADS)

    Rok Ko, Byeong; Belle Collaboration

    2014-11-01

    We present charm CP violation and mixing measurements at Belle. They are the first observation of D0 - bar D0 mixing in e+e- collisions from D0 → K+π- decays, the most precise mixing and indirect CP violation parameters from D0 → K0Sπ+π- decays, and the timeintegrated CP asymmetries in D0 → π0π0 and D0 → K0Sπ0 decays. Our mixing measurement in D0 → K+π- decays excludes the no-mixing hypothesis at the 5.1 standard deviation level. The mixing parameters x = (0.56 ± 0.19+0.03+0.06-0.09-0.09)%, y = (0.30 ± 0.15+0.04+0.03-0.05-0.06)% and indirect CP violation parameters |q/p| = (0.90+0.16+0.05+0.06-0.15-0.04-0.05)%, arg(q/p) = (-6 ± 11 ± 3+3-4)° measured from D0 → K0Sπ+π- decays, and the time-integrated CP asymmetries AD0→π0π0CP = (-0.03 ± 0.64 ± 0.10)% and AD0→K0Sπ0CP = (-0.21 ± 0.16 ± 0.07)% are the most precisemeasurements to date. Our measurements here are consistent with predictions of the standard model.

  12. Effects of temporal fluctuations on mixing

    NASA Astrophysics Data System (ADS)

    Pool, Maria; Dentz, Marco; Post, Vincent E. A.; Simmons, Craig T.

    2016-04-01

    Mixing and dispersion in coastal aquifers are strongly influenced by periodic temporal flow fluctuations on multiple time-scales ranging from days (tides), seasons (pumping and recharge) to glacial cycles (regression and transgressions). Transient forcing effects lead to a complex space- ant time-dependent flow response which induces enhanced spreading and mixing of a dissolved substance. We study effective mixing and solute transport in temporally fluctuating one-dimensional flow for a stable stratification of two fluids of different density. We derive explicit expressions for the concentration distribution and variance to identify the controls and obtain realistic predictions of the coupling between mixing and oscillatory transient flow. We find that the magnitude of transient-driven mixing is mainly controlled by the hydraulic diffusivity, the period and the initial interface location. We also find a spatial dependence of the effective dispersion coefficient which at long times causes the concentration profile to become asymmetric. Sand column experiments under well-controlled laboratory conditions are presented to validate the theoretical effective model defined. The proposed formulation is found to provide very good predictions and correctly reproduces the experimental mixing dynamics.

  13. Cylindrical Mixing Layer Model in Stellar Jet

    NASA Astrophysics Data System (ADS)

    Choe, Seung-Urn; Yu, Kyoung Hee

    1994-12-01

    We have developed a cylindrical mixing layer model of a stellar jet including cooling effect in order to understand an optical emission mechanism along collimated high velocity stellar jets associated with young stellar objects. The cylindrical results have been calculated to be the same as the 2D ones presented by Canto & Raga(1991) because the entrainment efficiency in our cylindrical model has been obtained to be the same value as the 2D model has given. We have discussed the morphological and physical characteristics of the mixing layers by the cooling effect. As the jet Mach number increases, the initial temperature of the mixing layer goes high because the kinetic energy of the jet partly converts to the thermal energy of the mixing layer. The initial cooling of the mixing layer is very severe, changing its outer boundary radius. A subsequent change becomes adiabatic. The number of the Mach disks in the stellar jet and the total radiative luminosity of the mixing layer, based on our cylindrical calculation, have quite agreed with the observation.

  14. Robotics for mixed waste operations, demonstration description

    SciTech Connect

    Ward, C.R.

    1993-11-01

    The Department of Energy (DOE) Office of Technology Development (OTD) is developing technology to aid in the cleanup of DOE sites. Included in the OTD program are the Robotics Technology Development Program and the Mixed Waste Integrated Program. These two programs are working together to provide technology for the cleanup of mixed waste, which is waste that has both radioactive and hazardous constituents. There are over 240,000 cubic meters of mixed low level waste accumulated at DOE sites and the cleanup is expected to generate about 900,000 cubic meters of mixed low level waste over the next five years. This waste must be monitored during storage and then treated and disposed of in a cost effective manner acceptable to regulators and the states involved. The Robotics Technology Development Program is developing robotics technology to make these tasks safer, better, faster and cheaper through the Mixed Waste Operations team. This technology will also apply to treatment of transuranic waste. The demonstration at the Savannah River Site on November 2-4, 1993, showed the progress of this technology by DOE, universities and industry over the previous year. Robotics technology for the handling, characterization and treatment of mixed waste as well robotics technology for monitoring of stored waste was demonstrated. It was shown that robotics technology can make future waste storage and waste treatment facilities better, faster, safer and cheaper.

  15. Experimental variable-density mixing statistics

    NASA Astrophysics Data System (ADS)

    Gerashchenko, Sergiy; Prestridge, Katherine

    2013-11-01

    Velocity and density statistics are studied experimentally for variable density mixing of a heavy fluid jet into air coflow at two Atwood numbers. The effect of buoyancy is found to be important for most turbulent quantities measured. The high At jet with larger Reynolds number shows reduced lateral spreading compared to the low At jet of smaller Reynolds number. Some universal features of variable density mixing are elucidated from PDFs of density and density gradients. The low Atwood number PDFs show fast and uniform mixing. High Atwood number PDFs of density have skewness toward the larger densities, indicating reduced rate of mixing of pure heavy fluid due to its inertia. This skewness is related to strong local compression events that can lead to enhanced molecular mixing. Turbulent kinetic energy decreases with distance from the jet for low Atwood number but increases for high Atwood number due to flow acceleration and generation of extra shear and turbulence. This is clearly a buoyancy-mediated effect. Statistical characteristics of mixing such as Favre-averaged Reynolds stress and its anisotropy, turbulent mass flux velocity, density-specific volume correlation, density power spectra are also examined in the near and far field from the jet.

  16. Neutrino mass and mixing with discrete symmetry.

    PubMed

    King, Stephen F; Luhn, Christoph

    2013-05-01

    This is a review paper about neutrino mass and mixing and flavour model building strategies based on discrete family symmetry. After a pedagogical introduction and overview of the whole of neutrino physics, we focus on the PMNS mixing matrix and the latest global fits following the Daya Bay and RENO experiments which measure the reactor angle. We then describe the simple bimaximal, tri-bimaximal and golden ratio patterns of lepton mixing and the deviations required for a non-zero reactor angle, with solar or atmospheric mixing sum rules resulting from charged lepton corrections or residual trimaximal mixing. The different types of see-saw mechanism are then reviewed as well as the sequential dominance mechanism. We then give a mini-review of finite group theory, which may be used as a discrete family symmetry broken by flavons either completely, or with different subgroups preserved in the neutrino and charged lepton sectors. These two approaches are then reviewed in detail in separate chapters including mechanisms for flavon vacuum alignment and different model building strategies that have been proposed to generate the reactor angle. We then briefly review grand unified theories (GUTs) and how they may be combined with discrete family symmetry to describe all quark and lepton masses and mixing. Finally, we discuss three model examples which combine an SU(5) GUT with the discrete family symmetries A₄, S₄ and Δ(96).

  17. Characterization of Mixing Between Water and Biofuels

    NASA Astrophysics Data System (ADS)

    Cotel, Aline; Green, Erica; Acevedo, Marina; Otero, Margarita; Demond, Avery

    2012-11-01

    Currently, gasoline containing ethanol is considered to be among the best alternatives to gasoline. However, the potential environmental impact of a spill of ethanol-based biofuels on aquatic environments is an area of open discussion and research. Since these fuels are a combination of a miscible fluid (ethanol) and an immiscible fluid (gasoline), models used for traditional gasoline fuels (immiscible in water) are not applicable. Preliminary experiments show that when a solution of ethanol and glycol is mixed with water, a third mixed fluid is formed. Two distinct mixing regimes were observed. An exothermic reaction also occurred between ethanol and water. In the first regime, a turbulent wake is created between the ethanol/glycol and water layers causing the ethanol and glycol solution to entrain and mix into with the water phase. Because the mixed fluid is denser than either parent fluid, a dramatic overturning is possible. The amount of mixing was found to be dependent upon the initial ratio of ethanol to glycol in the parent fluid. The second regime begins when the turbulent wake has dissipated and the internal wave created by the plate has begun to settle, typically within the first minute. At this point, Bénard-like cells, similar to those typically seen in Rayleigh-Bénard convection, form at the interface and relatively slow mass transfer is evident. The cells at the interface show distinct features of interfacial turbulence, including small transverse waves, denoting that instabilities exist there. Funding from UM-OVPR and NSF Advance.

  18. Leptonic mixing, family symmetries, and neutrino phenomenology

    SciTech Connect

    Medeiros Varzielas, I. de; Gonzalez Felipe, R.; Serodio, H.

    2011-02-01

    Tribimaximal leptonic mixing is a mass-independent mixing scheme consistent with the present solar and atmospheric neutrino data. By conveniently decomposing the effective neutrino mass matrix associated to it, we derive generic predictions in terms of the parameters governing the neutrino masses. We extend this phenomenological analysis to other mass-independent mixing schemes which are related to the tribimaximal form by a unitary transformation. We classify models that produce tribimaximal leptonic mixing through the group structure of their family symmetries in order to point out that there is often a direct connection between the group structure and the phenomenological analysis. The type of seesaw mechanism responsible for neutrino masses plays a role here, as it restricts the choices of family representations and affects the viability of leptogenesis. We also present a recipe to generalize a given tribimaximal model to an associated model with a different mass-independent mixing scheme, which preserves the connection between the group structure and phenomenology as in the original model. This procedure is explicitly illustrated by constructing toy models with the transpose tribimaximal, bimaximal, golden ratio, and hexagonal leptonic mixing patterns.

  19. LED color mixing with diffractive structures

    NASA Astrophysics Data System (ADS)

    Bonenberger, Theresa; Baumgart, Jörg; Wendel, Simon; Neumann, Cornelius

    2013-03-01

    Lighting solutions with colored LEDs provide many opportunities for illumination. One of these opportunities is to create a color tunable light source. In this way different kinds of white light (color temperature) as well as discrete colors may be realized. This opens the field for applications as mood lighting. But there is always a spatial separation of the distinct LEDs that might get converted into an angular separation by any collimating optics. This angular separation causes such problems like color fringes and colored shadows that cannot be accepted in most applications. Conventional methods to solve these problems include e.g. mixing rods or dichroic filters. A new approach is the use of the dispersive effect of a diffractive structure to compensate the angular separation of the different colors. In this contribution the potential and limitations of diffractive structures in LED color mixing applications are discussed. Ray tracing simulations were performed to analyze such important parameters like efficiency, color performance and the cross section of the color mixing optics. New means for the estimation of color mixing performance were developed. A software tool makes it possible to detect the color distribution within ray trace data and it provides a quality factor to estimate the color mixing performance. It can be shown that the spectral band width has a large influence on the mixing process. Ray tracing simulations are compared with results of an experimental setup such that both measured as well as simulated data is presented.

  20. Tribimaximal mixing, discrete family symmetries, and a conjecture connecting the quark and lepton mixing matrices

    NASA Astrophysics Data System (ADS)

    Low, Catherine I.; Volkas, Raymond R.

    2003-08-01

    Neutrino oscillation experiments (excluding the Liquid Scintillator Neutrino Detector experiment) suggest a tribimaximal form for the lepton mixing matrix. This form indicates that the mixing matrix is probably independent of the lepton masses, and suggests the action of an underlying discrete family symmetry. Using these hints, we conjecture that the contrasting forms of the quark and lepton mixing matrices may both be generated by such a discrete family symmetry. This idea is that the diagonalization matrices out of which the physical mixing matrices are composed have large mixing angles, which cancel out due to a symmetry when the CKM matrix is computed, but do not do so in the MNS case. However, in the cases where the Higgs bosons are singlets under the symmetry, and the family symmetry commutes with SU(2)L, we prove a no-go theorem: no discrete unbroken family symmetry can produce the required mixing patterns. We then suggest avenues for future research.

  1. Quantifying mixing using magnetic resonance imaging.

    PubMed

    Tozzi, Emilio J; McCarthy, Kathryn L; Bacca, Lori A; Hartt, William H; McCarthy, Michael J

    2012-01-25

    Mixing is a unit operation that combines two or more components into a homogeneous mixture. This work involves mixing two viscous liquid streams using an in-line static mixer. The mixer is a split-and-recombine design that employs shear and extensional flow to increase the interfacial contact between the components. A prototype split-and-recombine (SAR) mixer was constructed by aligning a series of thin laser-cut Poly (methyl methacrylate) (PMMA) plates held in place in a PVC pipe. Mixing in this device is illustrated in the photograph in Fig. 1. Red dye was added to a portion of the test fluid and used as the minor component being mixed into the major (undyed) component. At the inlet of the mixer, the injected layer of tracer fluid is split into two layers as it flows through the mixing section. On each subsequent mixing section, the number of horizontal layers is duplicated. Ultimately, the single stream of dye is uniformly dispersed throughout the cross section of the device. Using a non-Newtonian test fluid of 0.2% Carbopol and a doped tracer fluid of similar composition, mixing in the unit is visualized using magnetic resonance imaging (MRI). MRI is a very powerful experimental probe of molecular chemical and physical environment as well as sample structure on the length scales from microns to centimeters. This sensitivity has resulted in broad application of these techniques to characterize physical, chemical and/or biological properties of materials ranging from humans to foods to porous media (1, 2). The equipment and conditions used here are suitable for imaging liquids containing substantial amounts of NMR mobile (1)H such as ordinary water and organic liquids including oils. Traditionally MRI has utilized super conducting magnets which are not suitable for industrial environments and not portable within a laboratory (Fig. 2). Recent advances in magnet technology have permitted the construction of large volume industrially compatible magnets suitable for

  2. Scalable Lateral Mixing and Coherent Turbulence DRI: Use of an AUV to Quantify Submesoscale Mixing Processes

    DTIC Science & Technology

    2012-09-30

    of an AUV to Quantify Submesoscale Mixing Processes Louis Goodman School for Marine Science and Technology (SMAST) University of Massachusetts...role of ocean turbulence in submesoscale dynamics. OBJECTIVES The objective of this project is to examine the role of ocean turbulence in... submesoscale mixing observed during the June 2011 LatMix experiment. Key questions to be addressed are the following: (1) What are the space and

  3. Measurements of Molecular Mixing in a High Schmidt Number Rayleigh-Taylor Mixing Layer

    SciTech Connect

    Mueschke, N J; Schilling, O; Youngs, D L; Andrews, M

    2007-12-03

    Molecular mixing measurements are performed for a high Schmidt number (Sc {approx} 10{sup 3}), small Atwood number (A {approx} 7.5 x 10{sup -4}) buoyancy-driven turbulent Rayleigh-Taylor mixing layer in a water channel facility. Salt was added to the top stream to create the desired density difference. The degree of molecular mixing was measured as a function of time by monitoring a diffusion-limited chemical reaction between the two fluid streams. The pH of each stream was modified by the addition of acid or alkali such that a local neutralization reaction occurred as the two fluids molecularly mixed. The progress of this neutralization reaction was tracked by the addition of phenolphthalein - a pH-sensitive chemical indicator - to the acidic stream. Accurately calibrated backlit optical techniques were used to measure the average concentration of the colored chemical indicator. Comparisons of chemical product formation for pre-transitional buoyancy- and shear-driven mixing layers are given. It is also shown that experiments performed at different equivalence ratios (acid/alkali concentration) can be combined to obtain a mathematical relationship between the colored product formed and the density variance. This relationship was used to obtain high-fidelity, quantitative measures of the degree of molecular mixing which are independent of probe resolution constraints. The dependence of such mixing parameters on the Schmidt and Reynolds numbers is examined by comparing the current Sc {approx} 10{sup 3} measurements with Sc = 0.7 gas-phase and Pr = 7 liquid-phase measurements. This comparison indicates that the Schmidt number has a large effect on the bulk quantity of mixed fluid at small Reynolds numbers Re{sub h} < 10{sup 3}. At late times, all mixing parameters indicated a greater degree of molecular mixing and a decreased Schmidt number dependence. Implications for the development and quantitative assessment of turbulent transport and mixing models appropriate for

  4. Liquid–liquid mixing studies in annular centrifugal contactors comparing stationary mixing vane options

    SciTech Connect

    Wardle, Kent E.

    2015-09-11

    Comparative studies of multiphase operation of an annular centrifugal contactor show the impact of housing stationary mixing vane configuration. A number of experimental results for several different mixing vane options are reported for operation of a 12.5 cm engineering-scale contactor unit. Fewer straight vanes give greater mixing-zone hold-up compared to curved vanes. Quantitative comparison of droplet size distribution also showed a significant decrease in mean diameter for four straight vanes versus eight curved vanes. This set of measurements gives a compelling case for careful consideration of mixing vane geometry when evaluating hydraulic operation and extraction process efficiency of annular centrifugal contactors.

  5. Turbulent mixing in a precessing sphere

    SciTech Connect

    Goto, Susumu Shimizu, Masaki; Kawahara, Genta

    2014-11-15

    By numerically simulating turbulent flows at high Reynolds numbers in a precessing sphere, we propose a method to enhance the mixing of a fluid confined within a smooth cavity by its rotational motion alone. To precisely evaluate the mixing efficiency, we extend the quantification method proposed by Danckwerts [“The definition and measurement of some characteristics of mixtures,” Appl. Sci. Res. A 3, 279–296 (1952)] to the case in which only a finite number of fluid particle trajectories can be known. Our accurate numerical tracking of fluid particles in the flow, which is controlled by the Reynolds number (an indicator of the spin rate) and the Poincaré number (the precession rate), shows the following results. First, the mixing process on the time scale normalized by the spin period is independent of the Reynolds number as long as it is high enough for the flow to be developed turbulence. Second, fastest mixing is achieved under weak precession (Poincaré number ≈0.1); in such cases, perfect mixing requires only 10–15 spins of the container. Third, the power to sustain turbulence is a weakly increasing function of the Poincaré number, and the energy efficiency of the mixing is also maximized when the Poincaré number is about 0.1. Fourth, efficient mixing driven by the weak precession arises from the effective cooperation of complex large-scale flow and small-scale turbulence, which itself is sustained by the large-scale flow.

  6. Mixing, segregation, and flow of granular materials

    NASA Astrophysics Data System (ADS)

    McCarthy, Joseph J.

    1998-11-01

    This dissertation addresses mixing, segregation, and flow of granular materials with the ultimate goal of providing fundamental understanding and tools for the rational design and optimization of mixing devices. In particular, the paradigm cases of a slowly rotated tumbler mixer and flow down an inclined plane are examined. Computational work, as well as supporting experiments, are used to probe both two and three dimensional systems. In the avalanching regime, the mixing and flow can be viewed either on a global-scale or a local-scale. On the global-scale, material is transported via avalanches whose gross motion can be well described by geometrical considerations. On the local-scale, the dynamics of the particle motion becomes important; particles follow complicated trajectories that are highly sensitive to differences in size/density/morphology. By decomposing the problem in this way, it is possible to study the implications of the geometry and dynamics separately and to add complexities in a controlled fashion. This methodology allows even seemingly difficult problems (i.e., mixing in non-convex geometries, and mixing of dissimilar particles) to be probed in a simple yet methodical way. In addition this technique provides predictions of optimal mixing conditions in an avalanching tumbler, a criterion for evaluating the effect of mixer shape, and mixing enhancement strategies for both two and three dimensional mixers. In the continuous regime, the flow can be divided into two regions: a rapid flow region of the cascading layer at the free surface, and a fixed bed region undergoing solid body rotation. A continuum-based description, in which averages are taken across the layer, generates quantitative predictions about the flow in the cascading layer and agrees well with experiment. Incorporating mixing through a diffusive flux (as well as constitutive expression for segregation) within the cascading layer allows for the determination of optimal mixing conditions

  7. Theoretical analysis of mixing in liquid clouds - Part 3: Inhomogeneous mixing

    NASA Astrophysics Data System (ADS)

    Pinsky, Mark; Khain, Alexander; Korolev, Alexei

    2016-07-01

    An idealized diffusion-evaporation model of time-dependent mixing between a cloud volume and a droplet-free volume is analyzed. The initial droplet size distribution (DSD) in the cloud volume is assumed to be monodisperse. It is shown that evolution of the microphysical variables and the final equilibrium state are unambiguously determined by two non-dimensional parameters. The first one is the potential evaporation parameter R, proportional to the ratio of the saturation deficit to the liquid water content in the cloud volume, that determines whether the equilibrium state is reached at 100 % relative humidity, or is characterized by a complete evaporation of cloud droplets. The second parameter Da is the Damkölher number equal to the ratio of the characteristic mixing time to the phase relaxation time. Parameters R and Da determine the type of mixing.The results are analyzed within a wide range of values of R and Da. It is shown that there is no pure homogeneous mixing, since the first mixing stage is always inhomogeneous. The mixing type can change during the mixing process. Any mixing type leads to formation of a tail of small droplets in DSD and, therefore, to DSD broadening that depends on Da. At large Da, the final DSD dispersion can be as large as 0.2. The total duration of mixing varies from several to 100 phase relaxation time periods, depending on R and Da.The definitions of homogeneous and inhomogeneous types of mixing are reconsidered and clarified, enabling a more precise delimitation between them. The paper also compares the results obtained with those based on the classic mixing concepts. >

  8. Diapycnal mixing in an Arctic coastal polynya

    NASA Astrophysics Data System (ADS)

    Bouruet-Aubertot, P.; Jardon, F.; Vivier, F.; Lourenço, A.; Cuypers, Y.

    2009-12-01

    Ocean mixing plays an important role in climate variability. In Arctic coastal polynyas, which are regions of dense water formation, internal wave activity and turbulent mixing can affect the ice cover through induced ocean-ice heat flux. Mixing can also affect the fate of dense waters once formed. In March 2007, a 60m-long ice tethered mooring, recording temperature and salinity at high frequency, with a relatively fine vertical resolution was deployed in the western part of Storfjorden in the Svalbard archipelago. Estimates of turbulent dissipation rates were derived from isopycnal vertical displacements. Eddy diffusivity was next inferred using a parameterization that depends on the energetics of the stratified turbulent flow. Observed levels of dissipation of turbulent potential energy per unit mass, 1.82 x 10e-7 W/kg, and diapycnal diffusivity, 2.8 x 10e-4 m2/s, were consistent with previous direct measurements in the region. The maximum values were found under the ice-ocean interface and down to 35m with a relative minimum in between, suggesting two differents energy source. As the ice cap limits mixing by the winds, internal ocean dynamics becomes a prominent source of mixing, especially in coastal regions. The influence of tides as a possible energy source for the internal wave field was therefore investigated. Finally, the internal wave field is compared with those at mid-latitudes and reasonable agreement with the Garret-Munk model is found.

  9. Does Mixing Make Residential Ventilation More Effective?

    SciTech Connect

    Sherman, Max; Walker, Iain

    2010-08-16

    Ventilation dilutes or removes indoor contaminants to reduce occupant exposure. In a multi-zone environment such as a house, there will be different dilution rates and different source strengths in every zone. The total ventilation rate is the most important factor in determining the exposure of occupants to given sources, but the zone- specific distribution of exhaust and supply air, and the mixing of ventilation air can have significant roles. Different types of ventilation systems will provide different amounts of mixing depending on several factors such as air leakage through the building envelope, air distribution systems and the location of sources and occupants. This paper reports recent results of investigations to determine the impact that air mixing has on exposures of residential occupants to prototypical contaminants of concern. Evaluations of existing field measurements and simulations reported in the literature are combined with new analyses to provide an integrated overview of the topic. The results show that for extreme cases additional mixing can be a significant factor but for typical homes looking at average exposures mixing is not helpful and can even make exposures worse.

  10. Mixed gaits in small avian terrestrial locomotion

    PubMed Central

    Andrada, Emanuel; Haase, Daniel; Sutedja, Yefta; Nyakatura, John A.; M. Kilbourne, Brandon; Denzler, Joachim; Fischer, Martin S.; Blickhan, Reinhard

    2015-01-01

    Scientists have historically categorized gaits discretely (e.g. regular gaits such as walking, running). However, previous results suggest that animals such as birds might mix or regularly or stochastically switch between gaits while maintaining a steady locomotor speed. Here, we combined a novel and completely automated large-scale study (over one million frames) on motions of the center of mass in several bird species (quail, oystercatcher, northern lapwing, pigeon, and avocet) with numerical simulations. The birds studied do not strictly prefer walking mechanics at lower speeds or running mechanics at higher speeds. Moreover, our results clearly display that the birds in our study employ mixed gaits (such as one step walking followed by one step using running mechanics) more often than walking and, surprisingly, maybe as often as grounded running. Using a bio-inspired model based on parameters obtained from real quails, we found two types of stable mixed gaits. In the first, both legs exhibit different gait mechanics, whereas in the second, legs gradually alternate from one gait mechanics into the other. Interestingly, mixed gaits parameters mostly overlap those of grounded running. Thus, perturbations or changes in the state induce a switch from grounded running to mixed gaits or vice versa. PMID:26333477

  11. Who Moves to Mixed-Income Neighborhoods?*

    PubMed Central

    McKinnish, Terra; White, T. Kirk

    2011-01-01

    This paper uses confidential Census data, specifically the 1990 and 2000 Census Long Form data, to study the income dispersion of recent cohorts of migrants to mixed-income neighborhoods. We investigate whether neighborhoods with high levels of income dispersion attract economically diverse in-migrants. If recent in-migrants to mixed-income neighborhoods exhibit high levels of income dispersion, this is consistent with stable mixed-income neighborhoods. If, however, mixed-income neighborhoods are comprised of homogenous low-income (high-income) cohorts of long-term residents combined with homogenous high-income (low-income) cohorts of recent arrivals, this is consistent with neighborhood transition. Our results indicate that neighborhoods with high levels of income dispersion do in fact attract a much more heterogeneous set of in-migrants, particularly from the tails of the income distribution. Our results also suggest that the residents of mixed-income neighborhoods may be less heterogeneous with respect to lifetime income. PMID:21479114

  12. Mixed gaits in small avian terrestrial locomotion.

    PubMed

    Andrada, Emanuel; Haase, Daniel; Sutedja, Yefta; Nyakatura, John A; Kilbourne, Brandon M; Denzler, Joachim; Fischer, Martin S; Blickhan, Reinhard

    2015-09-03

    Scientists have historically categorized gaits discretely (e.g. regular gaits such as walking, running). However, previous results suggest that animals such as birds might mix or regularly or stochastically switch between gaits while maintaining a steady locomotor speed. Here, we combined a novel and completely automated large-scale study (over one million frames) on motions of the center of mass in several bird species (quail, oystercatcher, northern lapwing, pigeon, and avocet) with numerical simulations. The birds studied do not strictly prefer walking mechanics at lower speeds or running mechanics at higher speeds. Moreover, our results clearly display that the birds in our study employ mixed gaits (such as one step walking followed by one step using running mechanics) more often than walking and, surprisingly, maybe as often as grounded running. Using a bio-inspired model based on parameters obtained from real quails, we found two types of stable mixed gaits. In the first, both legs exhibit different gait mechanics, whereas in the second, legs gradually alternate from one gait mechanics into the other. Interestingly, mixed gaits parameters mostly overlap those of grounded running. Thus, perturbations or changes in the state induce a switch from grounded running to mixed gaits or vice versa.

  13. Flavor mixing democracy and minimal CP violation

    NASA Astrophysics Data System (ADS)

    Gerard, Jean-Marc; Xing, Zhi-zhong

    2012-06-01

    We point out that there is a unique parametrization of quark flavor mixing in which every angle is close to the Cabibbo angle θC≃13° with the CP-violating phase ϕq around 1°, implying that they might all be related to the strong hierarchy among quark masses. Applying the same parametrization to lepton flavor mixing, we find that all three mixing angles are comparably large (around π/4) and the Dirac CP-violating phase ϕl is also minimal as compared with its values in the other eight possible parametrizations. In this spirit, we propose a simple neutrino mixing ansatz which is equivalent to the tri-bimaximal flavor mixing pattern in the ϕl→0 limit and predicts sin θ13=1/√{2}sin(ϕl/2) for reactor antineutrino oscillations. Hence the Jarlskog invariant of leptonic CP violation Jl=(sin ϕl)/12 can reach a few percent if θ13 lies in the range 7°⩽θ13⩽10°.

  14. Mixing Dynamics Between Water and Biofuels

    NASA Astrophysics Data System (ADS)

    Cotel, Aline; Demond, Avery; Lei, Jiariu; Green, Erica

    2013-11-01

    Currently, ethanol-based biofuels are considered to be among the best alternatives to gasoline. However, the potential environmental impact of a spill of such fuels on aquatic environments is an area of open discussion and research. Since these fuels are a combination of a miscible fluid (ethanol) and an immiscible fluid (gasoline), models used for traditional gasoline fuels (immiscible in water) are not applicable. Preliminary experiments show that when a solution of ethanol and glycol is mixed with water, a third mixed fluid is formed. Two distinct mixing regimes are observed. A turbulent wake is created between the ethanol/glycol and water layers to cause the ethanol and glycol solution to entrain and mix into with the water phase. In the first regime, due to nonlinear mixing behavior, a dramatic overturning is possible for a certain range of parameters. The second regime begins when the turbulent wake has dissipated and the internal wave created by the plate has begun to settle, typically within the first minute. At this point, Bénard-like cells, similar to those typically seen in Rayleigh-Bénard convection, form at the interface and relatively slow mass transfer is evident. Both regimes are described quantitatively with a set of dimensionless parameters.

  15. TRENDS IN ESTIMATED MIXING DEPTH DAILY MAXIMUMS

    SciTech Connect

    Buckley, R; Amy DuPont, A; Robert Kurzeja, R; Matt Parker, M

    2007-11-12

    Mixing depth is an important quantity in the determination of air pollution concentrations. Fireweather forecasts depend strongly on estimates of the mixing depth as a means of determining the altitude and dilution (ventilation rates) of smoke plumes. The Savannah River United States Forest Service (USFS) routinely conducts prescribed fires at the Savannah River Site (SRS), a heavily wooded Department of Energy (DOE) facility located in southwest South Carolina. For many years, the Savannah River National Laboratory (SRNL) has provided forecasts of weather conditions in support of the fire program, including an estimated mixing depth using potential temperature and turbulence change with height at a given location. This paper examines trends in the average estimated mixing depth daily maximum at the SRS over an extended period of time (4.75 years) derived from numerical atmospheric simulations using two versions of the Regional Atmospheric Modeling System (RAMS). This allows for differences to be seen between the model versions, as well as trends on a multi-year time frame. In addition, comparisons of predicted mixing depth for individual days in which special balloon soundings were released are also discussed.

  16. Flow and mixing by small intestine villi.

    PubMed

    Lim, Y F; de Loubens, C; Love, R J; Lentle, R G; Janssen, P W M

    2015-06-01

    Flow and mixing in the small intestine are multi-scale processes. Flows at the scale of the villi (finger-like structures of ≈500 μm length) are poorly understood. We developed a three-dimensional lattice-Boltzmann model to gain insight into the effects of villous movements and the rheology of digesta on flow, mixing and absorption of nutrients at the periphery of the intestinal lumen. Our model simulated the hydrodynamic consequences of villi movements that resulted from folding of the mucosa during longitudinal contractions. We found that cyclic approximation and separation of groups of villi generated laminar eddies at the edges of the group and augmented mass transfers in the radial direction between the inter-villous space and the intestinal lumen which improved the absorption of nutrients and mixing at the periphery of the lumen. This augmentation was greater with highly diffusible nutrients and with high levels of shear-thinning (pseudoplasticity) of the fluid. We compared our results with bulk flows simulations done by previous workers and concluded that villous movements during longitudinal contractions is a major radial mixing mechanism in the small intestine and increases mixing and absorption around the mucosa despite adverse rheology.

  17. Mixing Enhancement in a Lobed Injector

    NASA Technical Reports Server (NTRS)

    Smith, L. L.; Majamaki, A. J.; Lam, I. T.; Delabroy, O.; Karagozian, A. R.; Marble, F. E.; Smith, O. I.

    1997-01-01

    An experimental investigation of the non-reactive mixing processes associated with a lobed fuel injector in a coflowing air stream is presented. The lobed fuel injector is a device which generates streamwise vorticity, producing high strain rates which can enhance the mixing of reactants while delaying ignition in a controlled manner. The lobed injectors examined in the present study consist of two corrugated plates between which a fuel surrogate, CO2, is injected into coflowing air. Acetone is seeded in the CO2 supply as a fuel marker. Comparison of two alternative lobed injector geometries is made with a straight fuel injector to determine net differences in mixing and strain fields due to streamwise vorticity generation. Planar laser-induced fluorescence (PLIF) of the seeded acetone yields two-dimensional images of the scalar concentration field at various downstream locations, from which local mixing and scalar dissipation rates are computed. It is found that the lobed injector geometry can enhance molecular mixing and create a highly strained flowfield, and that the strain rates generated by scalar energy dissipation can potentially delay ignition in a reacting flowfield.

  18. Multipartite entangled states in particle mixing

    SciTech Connect

    Blasone, M.; Dell'Anno, F.; De Siena, S.; Di Mauro, M.; Illuminati, F.

    2008-05-01

    In the physics of flavor mixing, the flavor states are given by superpositions of mass eigenstates. By using the occupation number to define a multiqubit space, the flavor states can be interpreted as multipartite mode-entangled states. By exploiting a suitable global measure of entanglement, based on the entropies related to all possible bipartitions of the system, we analyze the correlation properties of such states in the instances of three- and four-flavor mixing. Depending on the mixing parameters, and, in particular, on the values taken by the free phases, responsible for the CP-violation, entanglement concentrates in certain bipartitions. We quantify in detail the amount and the distribution of entanglement in the physically relevant cases of flavor mixing in quark and neutrino systems. By using the wave packet description for localized particles, we use the global measure of entanglement, suitably adapted for the instance of multipartite mixed states, to analyze the decoherence, induced by the free evolution dynamics, on the quantum correlations of stationary neutrino beams. We define a decoherence length as the distance associated with the vanishing of the coherent interference effects among massive neutrino states. We investigate the role of the CP-violating phase in the decoherence process.

  19. Prediction of dynamic and mixing characteristics of drop-laden mixing layers using DNS and LES

    NASA Technical Reports Server (NTRS)

    Okong'o, N.; Leboissetier, A.; Bellan, J.

    2004-01-01

    Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) have been conducted of a temporal mixing layer laden with evaporating drops, in order to assess the ability of LES to reproduce dynamic and mixing aspects of the DNS which affect combustion, independently of combustion models.

  20. MixSIAR: A Bayesian stable isotope mixing model for characterizing intrapopulation niche variation

    EPA Science Inventory

    Background/Question/Methods The science of stable isotope mixing models has tended towards the development of modeling products (e.g. IsoSource, MixSIR, SIAR), where methodological advances or syntheses of the current state of the art are published in parity with software packa...

  1. 26 CFR 1.1092(b)-4T - Mixed straddles; mixed straddle account (temporary).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... year for which the taxpayer makes the election or January 1, 1984, whichever is later. See § 1.1092(b... Corporation stock or any stock in UVW Corporation. If B makes the mixed straddle account election under this... respect to each other. If B makes the mixed straddle account election under this section for all...

  2. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, I.O.

    1992-04-21

    A free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7 [times] 10[sup [minus]3] to about 7 [times] 10[sup [minus]2] microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub. 9 figs.

  3. Passive scalar mixing in vortex rings

    NASA Astrophysics Data System (ADS)

    Sau, Rajes; Mahesh, Krishnan

    2006-11-01

    Direct numerical simulations of passive scalar mixing in vortex rings are performed, with and without crossflow. The simulation results without crossflow agree well with experimental data for `formation number', total circulation, trajectory and entrainment fraction. Scalar profiles, mixedness and volume of scalar carrying fluid are used to quantify mixing, whose characteristics are quite different in the formation and propagation phases of the ring. These results are explained in terms of entrainment by the ring. The simulations with crossflow show that the ring tilts and deforms. When the stroke ratio is greater than formation number, the ring tilts in the direction of the crossflow. On the other hand, when the stroke ratio is less than formation number, the ring tilts in the opposite direction, such that its induced velocity opposes the crossflow. The Magnus effect may be used to provide a simple explanation. The impact of this behavior on mixing will be discussed.

  4. Designing a Mixed Reality Intergenerational Entertainment System

    NASA Astrophysics Data System (ADS)

    Khoo, Eng Tat; Merritt, Tim; Cheok, Adrian David

    This chapter presents steps for designing an intergenerational mixed reality entertainment system, which focuses on physical and social interactions using a mixed reality floor system. The main design goals include the following: facilitating interactions between users with varied levels of skill in utilizing technology, utilizing the familiar physical motions from other activities to make an intuitive physical interface, and encouraging social interactions among families and friends. Detailed implementation of these steps is presented in the design of our intergenerational entertainment system, Age Invaders. Our design process is based on user-centered design. The results of the study help to focus the refinements of the existing platform from a usability standpoint and also aid in the development of new physical entertainment and interactive applications. This study provides insights into user issues including how users interact in a complex mixed reality experience.

  5. Mixed-mode fracture of ceramics

    SciTech Connect

    Petrovic, J.J.

    1985-01-01

    The mixed-mode fracture behavior of ceramic materials is of importance for monolithic ceramics in order to predict the onset of fracture under generalized loading conditions and for ceramic composites to describe crack deflection toughening mechanisms. Experimental data on surface flaw mixed-mode fracture in various ceramics indicate that the flaw-plane normal stress at fracture decreases with increasing in-flaw-plane shear stress, although present data exhibit a fairly wide range in details of this sigma - tau relationship. Fracture from large cracks suggests that Mode II has a greater effect on Mode I fracture than Mode III. A comparison of surface flaw and large crack mixed-mode I-II fracture responses indicated that surface flaw behavior is influenced by shear resistance effects.

  6. Mixed surfactant systems for enhanced oil recovery

    SciTech Connect

    Llave, F.M.; Gall, B.L.; Noll, L.A.

    1990-12-01

    The results of an evaluation of mixed surfactant systems for enhanced oil recovery are described. Several surfactant combinations have been studied. These include alkyl aryl sulfonates as primary surfactants and carboxymethylated ethoxylated (CME) surfactants and ethoxylated sulfonates (ES) as secondary surfactants. The ethoxylated surfactants increase the salinity tolerance of the primary surfactants and, in theory, allow tailoring of the surfactant system to match selected reservoir conditions. The experiments conducted included interfacial tension (IFT) measurements, phase behavior measurements, adsorption and/or chromatographic separation of mixed surfactant systems, measurements of solution properties such as the critical micelle concentration (CMC) of surfactant mixtures, and crude oil displacement experiments. The effects of temperature, surfactant concentration, salinity, presence of divalent ions, hydrocarbon type, and component proportions in the mixed surfactant combinations, and injection strategies on the performance potential of the targeted surfactant/hydrocarbon systems were studied. 40 refs., 37 figs., 8 tabs.

  7. Experiences with treatment of mixed waste

    SciTech Connect

    Dziewinski, J.; Marczak, S.; Smith, W.H.; Nuttall, E.

    1996-04-10

    During its many years of research activities involving toxic chemicals and radioactive materials, Los Alamos National Laboratory (Los Alamos) has generated considerable amounts of waste. Much of this waste includes chemically hazardous components and radioisotopes. Los Alamos chose to use an electrochemical process for the treatment of many mixed waste components. The electro-chemical process, which the authors are developing, can treat a great variety of waste using one type of equipment built at a moderate expense. Such a process can extract heavy metals, destroy cyanides, dissolve contamination from surfaces, oxidize toxic organic compounds, separate salts into acids and bases, and reduce the nitrates. All this can be accomplished using the equipment and one crew of trained operating personnel. Results of a treatability study of chosen mixed wastes from Los Alamos Mixed Waste Inventory are presented. Using electrochemical methods cyanide and heavy metals bearing wastes were treated to below disposal limits.

  8. Mixing characterization in a slab tank

    SciTech Connect

    Stoots, C.M.; Gavlak, A.M.; Calabrese, R.V.; Kyser, E.A.; Tatterson, G.B.

    1989-01-01

    Due to safety requirements, slab tanks are often used to process radioactive materials. The configuration is that of a slit or a tank of rectangular cross section with very low aspect ratio. Due to its nonconventional geometry, very little is known about the slab tank mixing environment. To better understand it, experiments have been performed in a full scale standard configuration equipped with two stirrer shafts, each containing several axial impellers. To characterize the velocity field, mean and RMS turbulent velocities have been measured at several impeller speeds with a two-component Laser Doppler Anemometer (LDA). The LDA data have been supplemented with flow visualization, circulation time, and mixing time studies. Since the slab tank is often used as a precipitator, solids suspension studies have also been performed. The results of the various experiments will be presented and will be interpreted to elucidate slab tank dynamics. The implication to mixing efficiency will also be discussed.

  9. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, I.O.

    1993-10-19

    Free flowing, conformable powder-like mix of silica particles and a phase change material (pcm) is disclosed. The silica particles have a critical size of about 7[times]10[sup [minus]3] to about 7[times]10[sup [minus]2] microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub. 10 figures.

  10. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, I.O.

    1994-02-01

    Free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a PCM material. The silica-PCM mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub. 2 figures.

  11. Turbulent jet mixing in a supersonic stream

    NASA Technical Reports Server (NTRS)

    Swanson, R. C.; Schetz, J. A.

    1971-01-01

    An experimental study of turbulent, subsonic, coaxial jet mixing of air in a supersonic air stream is presented. Data taken at five axial stations downstream of the exit of the jet supply tube, which was suspended through the nozzle throat of a supersonic wind tunnel, are given in the form of total pressure, Mach number, and velocity distributions. An investigation of the effect of swirl as a mixing aid was conducted. Swirl, produced by tangential injection of 50% of the total air mass flow leaving the jet supply tube, was examined through Schlieren photographs and total pressure surveys. From a comparison of nonswirl and swirl data, it is concluded that the swirl has no discernible effect on the mixing.

  12. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, Ival O.

    1992-01-01

    Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

  13. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, Ival O.

    1993-01-01

    Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garmets, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

  14. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, Ival O.

    1993-01-01

    Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

  15. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, Ival O.

    1994-01-01

    Free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a PCM material. The silica-PCM mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

  16. Evidence for D0-D0 mixing.

    PubMed

    Aubert, B; Bona, M; Boutigny, D; Karyotakis, Y; Lees, J P; Poireau, V; Prudent, X; Tisserand, V; Zghiche, A; Garra Tico, J; Grauges, E; Lopez, L; Palano, A; Eigen, G; Stugu, B; Sun, L; Abrams, G S; Battaglia, M; Brown, D N; Button-Shafer, J; Cahn, R N; Groysman, Y; Jacobsen, R G; Kadyk, J A; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lopes Pegna, D; Lynch, G; Mir, L M; Orimoto, T J; Ronan, M T; Tackmann, K; Wenzel, W A; Del Amo Sanchez, P; Hawkes, C M; Watson, A T; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Schroeder, T; Steinke, M; Walker, D; Asgeirsson, D J; Cuhadar-Donszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Saleem, M; Teodorescu, L; Blinov, V E; Bukin, A D; Druzhinin, V P; Golubev, V B; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Todyshev, K Yu; Bondioli, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M; Martin, E C; Stoker, D P; Abachi, S; Buchanan, C; Foulkes, S D; Gary, J W; Liu, F; Long, O; Shen, B C; Zhang, L; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Kovalskyi, D; Richman, J D; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Schalk, T; Schumm, B A; Seiden, A; Williams, D C; Wilson, M G; Winstrom, L O; Chen, E; Cheng, C H; Fang, F; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Mancinelli, G; Meadows, B T; Mishra, K; Sokoloff, M D; Blanc, F; Bloom, P C; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nagel, M; Nauenberg, U; Olivas, A; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Gabareen, A M; Soffer, A; Toki, W H; Wilson, R J; Winklmeier, F; Zeng, Q; Altenburg, D D; Feltresi, E; Hauke, A; Jasper, H; Merkel, J; Petzold, A; Spaan, B; Wacker, K; Brandt, T; Klose, V; Kobel, M J; Lacker, H M; Mader, W F; Nogowski, R; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Volk, A; Bernard, D; Bonneaud, G R; Latour, E; Lombardo, V; Thiebaux, Ch; Verderi, M; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Robertson, A I; Xie, Y; Andreotti, M; Bettoni, D; Bozzi, C; Calabrese, R; Cecchi, A; Cibinetto, G; Franchini, P; Luppi, E; Negrini, M; Petrella, A; Piemontese, L; Prencipe, E; Santoro, V; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; de Sangro, R; Finocchiaro, G; Pacetti, S; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Buzzo, A; Contri, R; Lo Vetere, M; Macri, M M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Chaisanguanthum, K S; Morii, M; Wu, J; Dubitzky, R S; Marks, J; Schenk, S; Uwer, U; Bard, D J; Dauncey, P D; Flack, R L; Nash, J A; Nikolich, M B; Panduro Vazquez, W; Behera, P K; Chai, X; Charles, M J; Mallik, U; Meyer, N T; Ziegler, V; Cochran, J; Crawley, H B; Dong, L; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Gritsan, A V; Guo, Z J; Lae, C K; Denig, A G; Fritsch, M; Schott, G; Arnaud, N; Béquilleux, J; Davier, M; Grosdidier, G; Höcker, A; Lepeltier, V; Le Diberder, F; Lutz, A M; Pruvot, S; Rodier, S; Roudeau, P; Schune, M H; Serrano, J; Sordini, V; Stocchi, A; Wang, W F; Wormser, G; Lange, D J; Wright, D M; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; Hutchcroft, D E; Payne, D J; Schofield, K C; Touramanis, C; Bevan, A J; George, K A; Di Lodovico, F; Menges, W; Sacco, R; Cowan, G; Flaecher, H U; Hopkins, D A; Jackson, P S; McMahon, T R; Salvatore, F; Wren, A C; Brown, D N; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Chia, Y M; Edgar, C L; Lafferty, G D; West, T J; Yi, J I; Anderson, J; Chen, C; Jawahery, A; Roberts, D A; Simi, G; Tuggle, J M; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Li, X; Moore, T B; Salvati, E; Saremi, S; Cowan, R; Fisher, P H; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; McLachlin, S E; Patel, P M; Robertson, S H; Lazzaro, A; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Simard, M; Taras, P; Viaud, F B; Nicholson, H; De Nardo, G; Fabozzi, F; Lista, L; Monorchio, D; Sciacca, C; Baak, M A; Raven, G; Snoek, H L; Jessop, C P; LoSecco, J M; Benelli, G; Corwin, L A; Gan, K K; Honscheid, K; Hufnagel, D; Kagan, H; Kass, R; Morris, J P; Rahimi, A M; Regensburger, J J; Ter-Antonyan, R; Wong, Q K; Blount, N L; Brau, J; Frey, R; Igonkina, O; Kolb, J A; Lu, M; Rahmat, R; Sinev, N B; Strom, D; Strube, J; Torrence, E; Gagliardi, N; Gaz, A; Margoni, M; Morandin, M; Pompili, A; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Ben-Haim, E; Briand, H; Calderini, G; Chauveau, J; David, P; Del Buono, L; de la Vaissière, Ch; Hamon, O; Leruste, Ph; Malclès, J; Ocariz, J; Perez, A; Gladney, L; Biasini, M; Covarelli, R; Manoni, E; Angelini, C; Batignani, G; Bettarini, S; Carpinelli, M; Cenci, R; Cervelli, A; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Mazur, M A; Morganti, M; Neri, N; Paoloni, E; Rizzo, G; Walsh, J J; Haire, M; Biesiada, J; Elmer, P; Lau, Y P; Lu, C; Olsen, J; Smith, A J S; Telnov, A V; Baracchini, E; Bellini, F; Cavoto, G; D'Orazio, A; del Re, D; Di Marco, E; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Jackson, P D; Li Gioi, L; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Renga, F; Voena, C; Ebert, M; Schröder, H; Waldi, R; Adye, T; Castelli, G; Franek, B; Olaiya, E O; Ricciardi, S; Roethel, W; Wilson, F F; Aleksan, R; Emery, S; Escalier, M; Gaidot, A; Ganzhur, S F; Hamel de Monchenault, G; Kozanecki, W; Legendre, M; Vasseur, G; Yèche, Ch; Zito, M; Chen, X R; Liu, H; Park, W; Purohit, M V; Wilson, J R; Allen, M T; Aston, D; Bartoldus, R; Bechtle, P; Berger, N; Claus, R; Coleman, J P; Convery, M R; Dingfelder, J C; Dorfan, J; Dubois-Felsmann, G P; Dujmic, D; Dunwoodie, W; Field, R C; Glanzman, T; Gowdy, S J; Graham, M T; Grenier, P; Hast, C; Hryn'ova, T; Innes, W R; Kaminski, J; Kelsey, M H; Kim, H; Kim, P; Kocian, M L; Leith, D W G S; Li, S; Luitz, S; Luth, V; Lynch, H L; MacFarlane, D B; Marsiske, H; Messner, R; Muller, D R; O'Grady, C P; Ofte, I; Perazzo, A; Perl, M; Pulliam, T; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Va'vra, J; van Bakel, N; Wagner, A P; Weaver, M; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Wilden, L; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Jain, V; Pan, B; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Ruland, A M; Schilling, C J; Schwitters, R F; Izen, J M; Lou, X C; Ye, S; Bianchi, F; Gallo, F; Gamba, D; Pelliccioni, M; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Lanceri, L; Vitale, L; Azzolini, V; Lopez-March, N; Martinez-Vidal, F; Milanes, D A; Oyanguren, A; Albert, J; Banerjee, Sw; Bhuyan, B; Hamano, K; Kowalewski, R; Nugent, I M; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Pappagallo, M; Band, H R; Chen, X; Dasu, S; Flood, K T; Hollar, J J; Kutter, P E; Pan, Y; Pierini, M; Prepost, R; Wu, S L; Yu, Z; Neal, H

    2007-05-25

    We present evidence for D0-D(0) mixing in D(0)-->K(+)pi(-) decays from 384 fb(-1) of e(+)e(-) colliding-beam data recorded near square root s=10.6 GeV with the BABAR detector at the PEP-II storage rings at the Stanford Linear Accelerator Center. We find the mixing parameters x('2)=[-0.22+/-0.30(stat)+/-0.21(syst)] x 10(-3) and y(')=[9.7+/-4.4(stat)+/-3.1(syst)] x 10(-3) and a correlation between them of -0.95. This result is inconsistent with the no-mixing hypothesis with a significance of 3.9 standard deviations. We measure R(D), the ratio of doubly Cabibbo-suppressed to Cabibbo-favored decay rates, to be [0.303+/-0.016(stat)+/-0.010(syst)]%. We find no evidence for CP violation.

  17. Mixed parity pairing in a dipolar gas

    NASA Astrophysics Data System (ADS)

    Bruun, G. M.; Hainzl, C.; Laux, M.

    2016-10-01

    We show that fermionic dipoles in a two-layer geometry form Cooper pairs with both singlet and triplet components when they are tilted with respect to the normal of the planes. The mixed parity pairing arises because the interaction between dipoles in the two different layers is not inversion symmetric. We use an efficient eigenvalue approach to calculate the zero-temperature phase diagram of the system as a function of the dipole orientation and the layer distance. The phase diagram contains purely triplet as well as mixed singlet and triplet superfluid phases. We show in detail how the pair wave function for dipoles residing in different layers smoothly changes from singlet to triplet symmetry as the orientation of the dipoles is changed. Our results indicate that dipolar quantum gases can be used to unambiguously observe mixed parity pairing.

  18. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, I.O.

    1993-05-18

    Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7[times]10[sup [minus]3] to about 7[times]10[sup [minus]2] microns and the p.c.m. must be added to the silica in an amount of 80 wt. % or less p.c.m. per combined weight of silica and p.c.m. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a p.c.m. material. The silica-p.c.m. mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

  19. Geometric uncertainty relation for mixed quantum states

    SciTech Connect

    Andersson, Ole Heydari, Hoshang

    2014-04-15

    In this paper we use symplectic reduction in an Uhlmann bundle to construct a principal fiber bundle over a general space of unitarily equivalent mixed quantum states. The bundle, which generalizes the Hopf bundle for pure states, gives in a canonical way rise to a Riemannian metric and a symplectic structure on the base space. With these we derive a geometric uncertainty relation for observables acting on quantum systems in mixed states. We also give a geometric proof of the classical Robertson-Schrödinger uncertainty relation, and we compare the two. They turn out not to be equivalent, because of the multiple dimensions of the gauge group for general mixed states. We give examples of observables for which the geometric relation provides a stronger estimate than that of Robertson and Schrödinger, and vice versa.

  20. Lidar observation of marine mixed layer

    NASA Technical Reports Server (NTRS)

    Yamagishi, Susumu; Yamanouchi, Hiroshi; Tsuchiya, Masayuki

    1992-01-01

    Marine mixed layer is known to play an important role in the transportation of pollution exiting ship funnels. The application of a diffusion model is critically dependent upon a reliable estimate of a lid. However, the processes that form lids are not well understood, though considerable progress toward marine boundary layer has been achieved. This report describes observations of the marine mixed layer from the course Ise-wan to Nii-jima with the intention of gaining a better understanding of their structure by a shipboard lidar. These observations were made in the summer of 1991. One interesting feature of the observations was that the multiple layers of aerosols, which is rarely numerically modeled, was encountered. No attempt is yet made to present a systematic analysis of all the data collected. Instead we focus on observations that seem to be directly relevant to the structure of the mixed layer.

  1. Superlubricity of a Mixed Aqueous Solution

    NASA Astrophysics Data System (ADS)

    Ma, Zhi-Zuo; Zhang, Chen-Hui; Luo, Jian-Bin; Lu, Xin-Chun; Wen, Shi-Zhu

    2011-05-01

    A super-low friction coefficient of 0.0028 is measured under a pressure of 300 MPa when the friction pair (the silicon nitride ball sliding on the silicate glass) is lubricated by the mixed aqueous solution of glycerol and boric acid. The morphorlogies of the hydroxylated glass plate are observed by an atomic force microscope (AFM) in deionized water, glycerol, boric acid and their mixed aqueous solution. Bonding peaks of the retained liquids adhered on the surface of the sliding track are detected by an infrared spectrum apparatus and a Raman spectrum apparatus. The mechanism of the superlubricity of the glycerol and boric acid mixed aqueous solution is discussed. It is deduced that the formation of the lubricant film has enough strength to support higher loads, the hydration effect offering the super lower shear resistance. Key words: superlubricity, water based lubricant, ultra-low friction

  2. Pulse Jet Mixing Tests With Noncohesive Solids

    SciTech Connect

    Meyer, Perry A.; Bamberger, Judith A.; Enderlin, Carl W.; Fort, James A.; Wells, Beric E.; Sundaram, S. K.; Scott, Paul A.; Minette, Michael J.; Smith, Gary L.; Burns, Carolyn A.; Greenwood, Margaret S.; Morgen, Gerald P.; Baer, Ellen BK; Snyder, Sandra F.; White, Michael K.; Piepel, Gregory F.; Amidan, Brett G.; Heredia-Langner, Alejandro

    2012-02-17

    This report summarizes results from pulse jet mixing (PJM) tests with noncohesive solids in Newtonian liquid. The tests were conducted during FY 2007 and 2008 to support the design of mixing systems for the Hanford Waste Treatment and Immobilization Plant (WTP). Tests were conducted at three geometric scales using noncohesive simulants, and the test data were used to develop models predicting two measures of mixing performance for full-scale WTP vessels. The models predict the cloud height (the height to which solids will be lifted by the PJM action) and the critical suspension velocity (the minimum velocity needed to ensure all solids are suspended off the floor, though not fully mixed). From the cloud height, the concentration of solids at the pump inlet can be estimated. The predicted critical suspension velocity for lifting all solids is not precisely the same as the mixing requirement for 'disturbing' a sufficient volume of solids, but the values will be similar and closely related. These predictive models were successfully benchmarked against larger scale tests and compared well with results from computational fluid dynamics simulations. The application of the models to assess mixing in WTP vessels is illustrated in examples for 13 distinct designs and selected operational conditions. The values selected for these examples are not final; thus, the estimates of performance should not be interpreted as final conclusions of design adequacy or inadequacy. However, this work does reveal that several vessels may require adjustments to design, operating features, or waste feed properties to ensure confidence in operation. The models described in this report will prove to be valuable engineering tools to evaluate options as designs are finalized for the WTP. Revision 1 refines data sets used for model development and summarizes models developed since the completion of Revision 0.

  3. NUCLEAR MIXING METERS FOR CLASSICAL NOVAE

    SciTech Connect

    Kelly, Keegan J.; Iliadis, Christian; Downen, Lori; Champagne, Art; José, Jordi

    2013-11-10

    Classical novae are caused by mass transfer episodes from a main-sequence star onto a white dwarf via Roche lobe overflow. This material possesses angular momentum and forms an accretion disk around the white dwarf. Ultimately, a fraction of this material spirals in and piles up on the white dwarf surface under electron-degenerate conditions. The subsequently occurring thermonuclear runaway reaches hundreds of megakelvin and explosively ejects matter into the interstellar medium. The exact peak temperature strongly depends on the underlying white dwarf mass, the accreted mass and metallicity, and the initial white dwarf luminosity. Observations of elemental abundance enrichments in these classical nova events imply that the ejected matter consists not only of processed solar material from the main-sequence partner but also of material from the outer layers of the underlying white dwarf. This indicates that white dwarf and accreted matter mix prior to the thermonuclear runaway. The processes by which this mixing occurs require further investigation to be understood. In this work, we analyze elemental abundances ejected from hydrodynamic nova models in search of elemental abundance ratios that are useful indicators of the total amount of mixing. We identify the abundance ratios ΣCNO/H, Ne/H, Mg/H, Al/H, and Si/H as useful mixing meters in ONe novae. The impact of thermonuclear reaction rate uncertainties on the mixing meters is investigated using Monte Carlo post-processing network calculations with temperature-density evolutions of all mass zones computed by the hydrodynamic models. We find that the current uncertainties in the {sup 30}P(p, γ){sup 31}S rate influence the Si/H abundance ratio, but overall the mixing meters found here are robust against nuclear physics uncertainties. A comparison of our results with observations of ONe novae provides strong constraints for classical nova models.

  4. Mixing processes within the polar night jet

    NASA Technical Reports Server (NTRS)

    Pierce, R. Bradley; Fairlie, T. Duncan; Grose, William L.; Swinbank, Richard; O'Neill, Alan

    1994-01-01

    Lagrangian material line simulations are performed using U.K. Meteorological Office simulated winds and temperatures to examine mixing processes in the middle- and lower-stratospheric polar night jet during the 1992 Southern Hemisphere spring and Northern Hemisphere winter. The Lagrangian simulations are undertaken to provide insight into the effects of mixing within the polar night jet on observations of the polar vortex made by instruments onboard the Upper Atmosphere Research Satellite (UARS) during these periods. A moderate to strong kinematic barrier to large-scale isentropic exchange, similar to the barrier identified in General Circulation Model (GCM) simulations, is identified during both of these periods. Characteristic timescales for mixing by large-scale isentropic motions within the polar night jet range from 20 days in the Southern Hemisphere lower stratosphere to years in the Northern Hemisphere middle stratosphere. The long mixing timescales found in the Northern Hemisphere polar night jet do not persist. Instead, the Northern Hemisphere kinematic barriers are broken down as part of the large-scale stratospheric response to a strong tropospheric blocking event. A series of Lagrangian experiments are conducted to investigate the sensitivity of the kinematic barrier to diabatic effects and to small-scale inertial gravity wave motions. Differential diabatic descent is found to have a significant impact on mixing processes within the Southern Hemisphere middle-stratospheric jet core. The interaction between small-scale displacements by idealized, inertial gravity waves and the large-scale flow is found to have a significant impact on mixing within the polar night jet in both hemispheres. These sensitivity experiments suggest that scales of motion that are unresolved in global assimilated datasets may contribute to mass exchange across the kinematic barrier to large-scale isentropic motion.

  5. Scoping Study of Airlift Circulation Technologies for Supplemental Mixing in Pulse Jet Mixed Vessels

    SciTech Connect

    Schonewill, Philip P.; Berglin, Eric J.; Boeringa, Gregory K.; Buchmiller, William C.; Burns, Carolyn A.; Minette, Michael J.

    2015-04-07

    At the request of the U.S. Department of Energy Office of River Protection, Pacific Northwest National Laboratory (PNNL) conducted a scoping study to investigate supplemental technologies for supplying vertical fluid motion and enhanced mixing in Waste Treatment and Immobilization Plant (WTP) vessels designed for high solids processing. The study assumed that the pulse jet mixers adequately mix and shear the bottom portion of a vessel. Given that, the primary function of a supplemental technology should be to provide mixing and shearing in the upper region of a vessel. The objective of the study was to recommend a mixing technology and configuration that could be implemented in the 8-ft test vessel located at Mid-Columbia Engineering (MCE). Several mixing technologies, primarily airlift circulator (ALC) systems, were evaluated in the study. This technical report contains a review of ALC technologies, a description of the PNNL testing and accompanying results, and recommended features of an ALC system for further study.

  6. Improvements in Mixing Time and Mixing Uniformity in Devices Designed for Studies of Protein Folding Kinetics

    SciTech Connect

    Yao, Shuhuai; Bakajin, Olgica

    2007-08-01

    Using a microfluidic laminar flow mixer designed for studies of protein folding kinetics, we demonstrate a mixing time of 1 +/- 1 micros with sample consumption on the order of femtomoles. We recognize two limitations of previously proposed designs: (1) size and shape of the mixing region, which limits mixing uniformity and (2) the formation of Dean vortices at high flow rates, which limits the mixing time. We address these limitations by using a narrow shape-optimized nozzle and by reducing the bend of the side channel streamlines. The final design, which combines both of these features, achieves the best performance. We quantified the mixing performance of the different designs by numerical simulation of coupled Navier-Stokes and convection-diffusion equations and experiments using fluorescence resonance energy-transfer (FRET)-labeled DNA.

  7. Medicare case-mix index increase

    PubMed Central

    Ginsburg, Paul B.; Carter, Grace M.

    1986-01-01

    Medicare paid hospitals a higher amount per admission in 1984 than had been planned because the case-mix index (CMI), which reflects the proportion of patients in high-weighted DRG's versus low-weighted ones, increased more than had been projected. This study estimated the degree to which the increase in the CMI from 1981 reflected medical practice changes, the aging of the Medicare inpatient population, changes in coding practices of physicians and hospitals, and changes in the way that the Health Care Financing Administration collects the data on case-mix. All of the above, except for aging, contributed to the increase in the CMI. PMID:10311672

  8. A Stratospheric Mixing and Transport Sampler

    NASA Technical Reports Server (NTRS)

    Sparling, Lynn

    1999-01-01

    The mixing and transport of stratospheric chemical species occurs by a variety of physical mechanisms on a range of length and time scales. Slow vertical diffusion resembles Taylor diffusion in pipe flow, while rapid stirring by chaotic advection is essentially a "baker's transformation", via the stretching and folding of material lines in the flow. Other examples include global scale transport by large organized flow structures, such as the winter stratospheric "eggbeater" that brings tropical air to the north pole. This presentation is a survey of these different mixing and transport phenomena and how we see their signatures in observations of chemical tracers.

  9. Mixed Media Filters for Aircrew Breathing Systems.

    DTIC Science & Technology

    1980-12-01

    F AD-AiLT1 382 UMPQUA RESEARCH CO MYRTLE CREEK OR F/S 6/11 I MIXED MEDIA FILTERS FOR AIRCREW BREATHING SYSTEMS. CU) IDEC 80 G V COLOMBO F33615-76-C...O603 UNCLASSIFIED SAMTR-60-27 NL C Report SAM-TR-80.27 00 lot MIXED MEDIA FILTERS FOR AIRCREW BREATHING SYSTEMS Gerald V. Colombo, M.S. Umpqua Research...Texas 78235 0 ’: 0 010 T .A NOTICES This final report was submitted by Umpqua Research Company, Myrtle Creek, Oregon 97457, under contract F33615-76-C

  10. Photochemistry and vertical mixing. [in Uranus atmosphere

    NASA Technical Reports Server (NTRS)

    Atreya, S. K.; Sandel, B. R.; Romani, P. N.

    1991-01-01

    Earth-based observations relevant to the question of photochemistry and vertical mixing are discussed. Phytolysis of methane, the only known photochemically active volatile in the Uranian atmosphere, produces heavier hydrocarbons, the most abundant of which are ethane, acetylene, and the polyacetylenes. Unlike Jupiter and Saturn, these hydrocarbon products condense at the low temperatures prevalent in the middle atmosphere. Contrary to the pre-Voyager notion that the atmosphere of Uranus is remarkable clear, it is found that the aerosols are widely and extensively distributed. Despite its photodestruction, methane remains stable in the Uranian atmosphere. The vertical mixing on Uranus is found to be the least efficient of any of the planetary atmospheres.

  11. Overview of robotics for Mixed Waste Operations

    SciTech Connect

    Ward, C.R.

    1994-02-01

    The Mixed Waste Operations Robotics program is developing robotics technology to make the handling and treatment of Department of Energy mixed waste; better, faster, safer and cheaper. This technology will provide remote operations and not require humans to be in contact with this radioactive and hazardous waste. The technology includes remote handling and opening of waste containers, remote removal of waste from the containers, remote characterization and sorting of the waste, and remote treatment and disposition of the waste. The initial technology development program culminated in an integrated demonstration in November 1993 and each aspect of this technology is described.

  12. Nondestructive assay confirmatory assessment experiments: mixed oxide

    SciTech Connect

    Lemming, J.F.

    1980-04-30

    The confirmatory assessment experiments demonstrate traceable nondestructive assay (NDA) measurements of plutonium in mixed oxide powder using commercially available spontaneous-fission assay systems. The experiments illustrate two major concepts: the production of calibration materials using calorimetric assay, and the use of paired measurements for measurement assurance. Two batches of well-characterized mixed oxide powder were used to establish the random and systematic error components. The major components of an NDA measurement assurance technique to establish and maintain traceability are identified and their functions are demonstrated. 20 refs., 10 figs., 10 tabs.

  13. Global analysis of fermion mixing with exotics

    NASA Technical Reports Server (NTRS)

    Nardi, Enrico; Roulet, Esteban; Tommasini, Daniele

    1991-01-01

    The limits are analyzed on deviation of the lepton and quark weak-couplings from their standard model values in a general class of models where the known fermions are allowed to mix with new heavy particles with exotic SU(2) x U(1) quantum number assignments (left-handed singlets or right-handed doublets). These mixings appear in many extensions of the electroweak theory such as models with mirror fermions, E(sub 6) models, etc. The results update previous analyses and improve considerably the existing bounds.

  14. Mixed-Mode-Bending Delamination Apparatus

    NASA Technical Reports Server (NTRS)

    Crews, John H., Jr.; Reeder, James R.

    1991-01-01

    Mixed-mode-bending delamination apparatus generates two types of delamination stress simultaneously in specimen from single externally applied point load. In technique, indivial mode I and mode II contributions to delamination in specimen analyzed by use of simple beam-theory equations, eliminating need for time-consuming, difficult numerical analysis. Allows wider range of mode I/mode II ratios than possible with many other methods. Mixed-mode delamination testing of interest in all fields utilizing composite materials, used mostly in aerospace field, but also used in automobiles, lightweight armored military vehicles, boats, and sporting equipment. Useful in general lumber, plywood, and adhesive industries, as well.

  15. Transition mixing study empirical model report

    NASA Technical Reports Server (NTRS)

    Srinivasan, R.; White, C.

    1988-01-01

    The empirical model developed in the NASA Dilution Jet Mixing Program has been extended to include the curvature effects of transition liners. This extension is based on the results of a 3-D numerical model generated under this contract. The empirical model results agree well with the numerical model results for all tests cases evaluated. The empirical model shows faster mixing rates compared to the numerical model. Both models show drift of jets toward the inner wall of a turning duct. The structure of the jets from the inner wall does not exhibit the familiar kidney-shaped structures observed for the outer wall jets or for jets injected in rectangular ducts.

  16. A Mixed Approach Of Automated ECG Analysis

    NASA Astrophysics Data System (ADS)

    De, A. K.; Das, J.; Majumder, D. Dutta

    1982-11-01

    ECG is one of the non-invasive and risk-free technique for collecting data about the functional state of the heart. However, all these data-processing techniques can be classified into two basically different approaches -- the first and second generation ECG computer program. Not the opposition, but simbiosis of these two approaches will lead to systems with the highest accuracy. In our paper we are going to describe a mixed approach which will show higher accuracy with lesser amount of computational work. Key Words : Primary features, Patients' parameter matrix, Screening, Logical comparison technique, Multivariate statistical analysis, Mixed approach.

  17. Group theory and dynamics of neutrino mixing

    NASA Astrophysics Data System (ADS)

    Lam, C. S.

    2011-06-01

    There is a direct group-theoretical connection between neutrino mixing and horizontal symmetry that can be established without any dynamical input. Such a connection is reviewed and expanded in this article. For certain symmetry groups G including A4 and S4, it is shown that a generic U(1)×G Higgs potential of a valon yields exactly the alignments dictated by the group-theoretical approach, but energy can now be used to discriminate different alignments. This mechanism possibly explains why starting from an A4 group, the tribimaximal mixing matrix with an enhanced S4 symmetry is more preferable than the one without it.

  18. Mixed waste paper to ethanol fuel

    SciTech Connect

    Not Available

    1991-01-01

    The objectives of this study were to evaluate the use of mixed waste paper for the production of ethanol fuels and to review the available conversion technologies, and assess developmental status, current and future cost of production and economics, and the market potential. This report is based on the results of literature reviews, telephone conversations, and interviews. Mixed waste paper samples from residential and commercial recycling programs and pulp mill sludge provided by Weyerhauser were analyzed to determine the potential ethanol yields. The markets for ethanol fuel and the economics of converting paper into ethanol were investigated.

  19. Neutrino Masses and Mixing from Supersymmetric Inflation

    NASA Astrophysics Data System (ADS)

    Lazarides, G.

    A supersymmetric model based on a l-right symmetric gauge group is proposed where hybrid inflation, baryogenesis and neutrino oscillations are linked.This scheme, supplemented by a familiar ansatz for the neutrino Dirac masses and mixing of the two heaviest families and with the MSW resolution of the solar neutrino puzzle, implies that 1 eVmντ ≲ 9 eV. The mixing angle θμτ is predicted to lie in a narrow range which will be partially tested by the Chorus/Nomad experiment.

  20. B^0_s mixing at CDF

    SciTech Connect

    Piedra, Jonatan; /Paris U., VI-VII

    2006-08-01

    The Tevatron collider at Fermilab provides a very rich environment for the study of b-hadrons. One of the most important analyses within the B physics program of the CDF experiment is B{sub s}{sup 0} mixing. Since the time this school was held, several improvements in the B{sub s}{sup 0} mixing analysis have made possible the measurement of the B{sub s}{sup 0} oscillation frequency, result that has been presented at the FPCP 2006 Conference.

  1. Histogenesis of ovarian malignant mixed mesodermal tumours.

    PubMed Central

    Clarke, T J

    1990-01-01

    The histogenesis of ovarian malignant mixed mesodermal tumours, which includes the concept of metaplastic carcinoma, is controversial. Four such tumours were examined for evidence of metaplastic transition from carcinoma to sarcoma using morphology and reticulin stains. Consecutive sections were stained immunohistochemically using cytokeratin and vimentin to determine whether cells at the interface between carcinoma and sarcoma expressed both cytokeratin and vimentin. There was no evidence of morphological, architectural, or immunohistochemical transitions from carcinoma to sarcoma in the four tumours studied. This suggests that ovarian malignant mixed mesodermal tumours are not metaplastic carcinomas but are composed of histogenetically different elements. Images PMID:2160478

  2. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, I.O.

    1994-12-06

    A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft. 3 figures.

  3. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, Ival O.

    1995-01-01

    A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft.

  4. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, I.O.

    1995-12-26

    A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft. 3 figs.

  5. Dry powder mixes comprising phase change materials

    DOEpatents

    Salyer, Ival O.

    1994-01-01

    A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft.

  6. Management of pesticide mixing and loading facilities

    SciTech Connect

    Dwinell, S.E.

    1994-12-31

    Many pesticide applicators have decided that a Chemical Mixing Facility (CMF) is the best way to manage problems of soil and water contamination at pesticide mixing and loading sites. These facilities must be managed properly to avoid the accumulation of potentially hazardous wastes, the creation of a point source of pollution, and possible fines for violation of environmental protection laws. Proper management must include pesticide containers, equipment rinsewater, sludge and sediments that accumulate on the pad, and materials used to contain and collect spills.

  7. Direct numerical simulation of turbulent mixing.

    PubMed

    Statsenko, V P; Yanilkin, Yu V; Zhmaylo, V A

    2013-11-28

    The results of three-dimensional numerical simulations of turbulent flows obtained by various authors are reviewed. The paper considers the turbulent mixing (TM) process caused by the development of the main types of instabilities: those due to gravitation (with either a fixed or an alternating-sign acceleration), shift and shock waves. The problem of a buoyant jet is described as an example of the mixed-type problem. Comparison is made with experimental data on the TM zone width, profiles of density, velocity and turbulent energy and degree of homogeneity.

  8. Mix experiments with the NOVA laser

    SciTech Connect

    Rupert, V.C.; Kilkenny, J.D.; Skokowski, P.G.

    1988-10-01

    The NOVA mix experiments are designed to study mix between two dissimilar materials subjected to strong (M/approximately/50) shocks and variable accelerations in a direction normal to their common boundary. The main purpose of the experiments is to provide a data base with which predictive models can be compared and normalized. Together with shock tube experiments, which explore a different regime, the current NOVA tests investigate the shock induced source terms in our model and the evolution of both Rayleigh-Taylor stable and unstable interfaces. 3 refs., 9 figs.

  9. A Mixed Methods Sampling Methodology for a Multisite Case Study

    ERIC Educational Resources Information Center

    Sharp, Julia L.; Mobley, Catherine; Hammond, Cathy; Withington, Cairen; Drew, Sam; Stringfield, Sam; Stipanovic, Natalie

    2012-01-01

    The flexibility of mixed methods research strategies makes such approaches especially suitable for multisite case studies. Yet the utilization of mixed methods to select sites for these studies is rarely reported. The authors describe their pragmatic mixed methods approach to select a sample for their multisite mixed methods case study of a…

  10. Mixed Methods Research: A Research Paradigm Whose Time Has Come

    ERIC Educational Resources Information Center

    Johnson, R. Burke; Onwuegbuzie, Anthony J.

    2004-01-01

    The purposes of this article are to position mixed methods research ("mixed research" is a synonym) as the natural complement to traditional qualitative and quantitative research, to present pragmatism as offering an attractive philosophical partner for mixed methods research, and to provide a framework for designing and conducting mixed methods…

  11. 24 CFR 891.815 - Mixed-finance developer's fee.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Mixed-finance developer's fee. 891...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.815 Mixed-finance developer's fee. (a) Mixed-finance developer's fee....

  12. 24 CFR 891.815 - Mixed-finance developer's fee.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Mixed-finance developer's fee. 891...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.815 Mixed-finance developer's fee. (a) Mixed-finance developer's fee....

  13. 24 CFR 891.825 - Mixed-finance closing documents.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Mixed-finance closing documents...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.825 Mixed-finance closing documents. The mixed-finance owner must...

  14. 24 CFR 891.815 - Mixed-finance developer's fee.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Mixed-finance developer's fee. 891...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.815 Mixed-finance developer's fee. (a) Mixed-finance developer's fee....

  15. 24 CFR 891.825 - Mixed-finance closing documents.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Mixed-finance closing documents...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.825 Mixed-finance closing documents. The mixed-finance owner must...

  16. 24 CFR 891.825 - Mixed-finance closing documents.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Mixed-finance closing documents...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.825 Mixed-finance closing documents. The mixed-finance owner must...

  17. 24 CFR 891.815 - Mixed-finance developer's fee.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Mixed-finance developer's fee. 891...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.815 Mixed-finance developer's fee. (a) Mixed-finance developer's fee....

  18. 24 CFR 891.825 - Mixed-finance closing documents.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Mixed-finance closing documents...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.825 Mixed-finance closing documents. The mixed-finance owner must...

  19. 24 CFR 891.825 - Mixed-finance closing documents.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Mixed-finance closing documents...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.825 Mixed-finance closing documents. The mixed-finance owner must...

  20. 24 CFR 891.815 - Mixed-finance developer's fee.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Mixed-finance developer's fee. 891...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.815 Mixed-finance developer's fee. (a) Mixed-finance developer's fee....