Science.gov

Sample records for 2-wk test solutions

  1. Technology Solutions for Testing.

    ERIC Educational Resources Information Center

    Olson, Allan

    2002-01-01

    Northwest Evaluation Association in Portland, Oregon, consults with state and local educators on assessment issues. Describes several approaches in place at school districts that are using some combination of computer-based tests to measure student growth. The computerized adaptive test adjusts items based on a student's answer in "real time."…

  2. Efficacy and safety of once-daily fluticasone furoate nasal spray in children with seasonal allergic rhinitis treated for 2 wk.

    PubMed

    Meltzer, Eli O; Lee, Jane; Tripathy, Ita; Lim, Junghee; Ellsworth, Anna; Philpot, Edward

    2009-05-01

    The objective of this study was to evaluate the efficacy and safety of fluticasone furoate (FF) nasal spray 55 and 110 microg once daily in children with seasonal allergic rhinitis (SAR). Patients (n = 554) received placebo nasal spray or FF, administered using a unique side-actuated device, in a 2-wk, randomized, double-blind study. Symptoms were evaluated by patients using a 4-point categorical scale. Efficacy assessments included reflective and instantaneous total nasal symptom scores (r/iTNSS). Primary analyses were conducted in patients aged 6-11 yr in the intent-to-treat population (ITT); the 2-11 yr group provided supportive analyses. In patients aged 6-11 yr, FF 110 microg once daily significantly improved the daily rTNSS compared with placebo. FF 55 microg once daily was only numerically better for rTNSS and iTNSS. Secondary pre-dose iTNSS and overall response to therapy were significant with FF 110 microg. The significant findings for FF 110 microg were supported by analyses in the entire ITT population of 2-11 yr olds. Both doses of FF were well tolerated. These study results suggest that FF nasal spray administered once daily for 2 wk is well tolerated and effective for the treatment of SAR symptoms in children aged 2-11 yr.

  3. A nutrient-dense, high-fiber, fruit-based supplement bar increases HDL cholesterol, particularly large HDL, lowers homocysteine, and raises glutathione in a 2-wk trial.

    PubMed

    Mietus-Snyder, Michele L; Shigenaga, Mark K; Suh, Jung H; Shenvi, Swapna V; Lal, Ashutosh; McHugh, Tara; Olson, Don; Lilienstein, Joshua; Krauss, Ronald M; Gildengoren, Ginny; McCann, Joyce C; Ames, Bruce N

    2012-08-01

    Dietary intake modulates disease risk, but little is known how components within food mixtures affect pathophysiology. A low-calorie, high-fiber, fruit-based nutrient-dense bar of defined composition (e.g., vitamins and minerals, fruit polyphenolics, β-glucan, docosahexaenoic acid) appropriate for deconstruction and mechanistic studies is described and evaluated in a pilot trial. The bar was developed in collaboration with the U.S. Department of Agriculture. Changes in cardiovascular disease and diabetes risk biomarkers were measured after 2 wk twice-daily consumption of the bar, and compared against baseline controls in 25 healthy adults. Plasma HDL-cholesterol (HDL-c) increased 6.2% (P=0.001), due primarily to a 28% increase in large HDL (HDL-L; P<0.0001). Total plasma homocysteine (Hcy) decreased 19% (P=0.017), and glutathione (GSH) increased 20% (P=0.011). The changes in HDL and Hcy are in the direction associated with decreased risk of cardiovascular disease and cognitive decline; increased GSH reflects improved antioxidant defense. Changes in biomarkers linked to insulin resistance and inflammation were not observed. A defined food-based supplement can, within 2 wk, positively impact metabolic biomarkers linked to disease risk. These results lay the groundwork for mechanistic/deconstruction experiments to identify critical bar components and putative synergistic combinations responsible for observed effects.

  4. CORROSION TESTING IN SIMULATED TANK SOLUTIONS

    SciTech Connect

    Hoffman, E.

    2010-12-09

    Three simulated waste solutions representing wastes from tanks SY-102 (high nitrate, modified to exceed guidance limits), AN-107, and AY-102 were supplied by PNNL. Out of the three solutions tested, both optical and electrochemical results show that carbon steel samples corroded much faster in SY-102 (high nitrate) than in the other two solutions with lower ratios of nitrate to nitrite. The effect of the surface preparation was not as strong as the effect of solution chemistry. In areas with pristine mill-scale surface, no corrosion occurred even in the SY-102 (high nitrate) solution, however, corrosion occurred in the areas where the mill-scale was damaged or flaked off due to machining. Localized corrosion in the form of pitting in the vapor space of tank walls is an ongoing challenge to overcome in maintaining the structural integrity of the liquid waste tanks at the Savannah River and Hanford Sites. It has been shown that the liquid waste condensate chemistry influences the amount of corrosion that occurs along the walls of the storage tanks. To minimize pitting corrosion, an effort is underway to gain an understanding of the pitting response in various simulated waste solutions. Electrochemical testing has been used as an accelerated tool in the investigation of pitting corrosion. While significant effort has been undertaken to evaluate the pitting susceptibility of carbon steel in various simulated waste solutions, additional effort is needed to evaluate the effect of liquid waste supernates from six Hanford Site tanks (AY-101, AY-102, AN-102, AN-107, SY-102 (high Cl{sup -}), and SY-102 (high nitrate)) on carbon steel. Solutions were formulated at PNNL to replicate tank conditions, and in the case of SY-102, exceed Cl{sup -} and NO{sub 3}{sup -} conditions, respectively, to provide a contrast between in and out of specification limits. The majority of previous testing has been performed on pristine polished samples. To evaluate the actual tank carbon steel

  5. Wafer level test solutions for IR sensors

    NASA Astrophysics Data System (ADS)

    Giessmann, Sebastian; Werner, Frank-Michael

    2014-05-01

    Wafer probers provide an established platform for performing electrical measurements at wafer level for CMOS and similar process technologies. For testing IR sensors, the requirements are beyond the standard prober capabilities. This presentation will give an overview about state of the art IR sensor probing systems reaching from flexible engineering solutions to automated production needs. Cooled sensors typically need to be tested at a target temperature below 80 K. Not only is the device temperature important but also the surrounding environment is required to prevent background radiation from reaching the device under test. To achieve that, a cryogenic shield is protecting the movable chuck. By operating that shield to attract residual gases inside the chamber, a completely contamination-free test environment can be guaranteed. The use of special black coatings are furthermore supporting the removal of stray light. Typically, probe card needles are operating at ambient (room) temperature when connecting to the wafer. To avoid the entrance of heat, which can result in distorted measurements, the probe card is fully embedded into the cryogenic shield. A shutter system, located above the probe field, is designed to switch between the microscope view to align the sensor under the needles and the test relevant setup. This includes a completely closed position to take dark current measurements. Another position holds a possible filter glass with the required aperture opening. The necessary infrared sources to stimulate the device are located above.

  6. Teaching and Testing Solutions to the Problem of Debilitating Effects of Test Anxiety on Test Performance.

    ERIC Educational Resources Information Center

    Hill, Kennedy T.; Horton, Margaret W.

    Educational solutions to the problem of test anxiety were explored. Test anxiety has a debilitating effect on performance which increases over the school years. The solution is, first, to measure test anxiety so that the extent of it, as well as the effectiveness of programs designed to alleviate it, can be measured. The seven-item Comfort Index,…

  7. Group Testing: Four Student Solutions to a Classic Optimization Problem

    ERIC Educational Resources Information Center

    Teague, Daniel

    2006-01-01

    This article describes several creative solutions developed by calculus and modeling students to the classic optimization problem of testing in groups to find a small number of individuals who test positive in a large population.

  8. Multi-Purpose Tests: A Solution to Test Proliferation.

    ERIC Educational Resources Information Center

    Holmes, Susan E.

    This research, conducted for California State Department of Education, is one component of a feasibility study focusing on ways to make the testing process more efficient by application of multi-purpose tests (MPT). MPT are designed, administered and scored to serve more than one purpose and to consolidate and unify testing programs as a partial…

  9. Testing Solutions for Adult Film Performers.

    PubMed

    Bergman, Zachary R

    2014-01-01

    The majority of the nation's adult films are produced in California, and within California, most production occurs in Los Angeles. In order to regulate that content, the County of Los Angeles passed the Safer Sex in the Adult Film Industry Act (Measure B) by way of referendum in November 2012. Measure B requires that adult film producers wishing to film in Los Angeles County obtain permits from the Los Angeles County Department of Public Health, and it also mandates that adult film performers use condoms while filming and "engaging in anal or vaginal sexual intercourse." Nevertheless, between August 2013 and January 2014, several adult film performers in California tested positive for HIV, and the threat of infection remains. Although Measure B is not the best way forward for Los Angeles County, elements of the ordinance should be incorporated into future legislative efforts. Given the economic ramifications of industry flight due to more localized regulations, this Note concludes that California should pass statewide comprehensive reform. Any such new legislation must treat "independent contractors," the classification generally used for adult film performs, as if they were regular employees. Legislation should also couple mandatory testing mechanisms with provisions granting performers the right to choose whether they use condoms. Finally, legislation must include mechanisms that ensure performers' preferences are not improperly tainted by outside forces and pressures. While there will always be risks associated with the production of adult content, if undertaken, these reforms could significantly mitigate those hazards. PMID:26809162

  10. Test procedure for anion exchange testing with Argonne 10-L solutions

    SciTech Connect

    Compton, J.A.

    1995-05-17

    Four anion exchange resins will be tested to confirm that they will sorb and release plutonium from/to the appropriate solutions in the presence of other cations. Certain cations need to be removed from the test solutions to minimize adverse behavior in other processing equipment. The ion exchange resins will be tested using old laboratory solutions from Argonne National Laboratory; results will be compared to results from other similar processes for application to all plutonium solutions stored in the Plutonium Finishing Plant.

  11. Avoidance-preference testing in density stratified solutions

    SciTech Connect

    Smith, E.H.; Logan, D.T.; Hansen, S.

    1994-12-31

    Toxicity testing is sometimes required where density stratifies test and reference solutions. Examples include freshwater effluents that float in estuarine and marine waters and desalinating plant effluents that sink. Standard avoidance-preference testing methods and apparatus are designed to test horizontal rather than vertical gradients and so are inappropriate for density stratified solutions. To overcome associated deficiencies, the authors modified testing chambers to take advantage of density stratification. Exposure levels for tests were selected based on NOELs from standard toxicity testing. Behavior of 10 striped bass was simultaneously observed using electronic surveillance. Measure of behavior include position in two axes and swimming speed. Avoidance-preference between several types of high density byproducts of salt water evaporation and lower density receiving water were tested. Results indicate that the modified test protocols allowed the authors to determine behavior responses to test materials.

  12. Creative solutions for complex developmental testing

    SciTech Connect

    1993-07-01

    Sandia National Laboratories was requested to establish the FAA Aging Aircraft Nondestructive Inspection (NDI) Development and Demonstration Center. The Center is housed in a hangar at the Albuquerque International Airport and owns its own aged transport airplane. The Center`s work encompasses research and development in enhanced structural inspection. The goals of the Center are to: promote NDI technology development and maturation; help transfer new nondevelopment item technology to the hangar floor; validate NDI techniques; assess reliability or probability of detection of NDI processes. An important part of this project will be to make sure that the cost of implementation and operation of any technique is seriously considered and that techniques are usable in the field. Among the initial techniques to be evaluated are: enhanced visual, magneto-optic eddy current; coherent optics; ultrasonics; thermographics; eddy current scanners; experimental modal analysis. This project is a perfect example of how Development Testing draws on its own resources and teams up with others, as necessary, to get the job done. In this case, New Mexico State University and a private company, Science Applications International Corporation, are assisting.

  13. Introduction to Latest RF ATE with Low Test Cost Solutions

    NASA Astrophysics Data System (ADS)

    Kimishima, Masayuki

    This paper describes latest RF Automated Test Equipment (RF ATE) technologies that include device under test (DUT) connections, a calibration method, and an RF test module mainly focusing on low cost of test (COT). Most important respect for low COT is how achieve a number of simultaneous measurements and short test time as well as a plain calibration. We realized these respects by a newly proposed calibration method and a drastically downsized RF test module with multiple resources and high throughput. The calibration method is very convenient for RF ATE. Major contribution for downsizing of the RF test module is RF circuit technology in form of RF functional system in package (RF-SIPs), resulting in very attractive test solutions.

  14. Aquatic toxicity testing for multicomponent compounds with special reference to preparation of test solution

    SciTech Connect

    Tadokoro, H.; Maeda, M.; Kawashima, Y.; Kitano, M.; Hwang, D.F.; Yoshida, T. )

    1991-02-01

    An adequate method of determining the toxicity of a compound consisting of multiple components, such as creosote, coal tar, and coal tar pitch, was studied for different test solution preparation methods, i.e., direct dosing without filtration, diluting the stock solution of saturated concentration, and dispersing with acetone. Killifish, Oryzias latipes, as a freshwater fish; red sea bream, Pagrus major, as a saltwater fish; and daphnia, Daphnia magna, as a representative crustacean, were used for testing. The chemical analysis of each preparation of test solution with gas chromatography revealed an entirely different profile of the components. The highest toxicity was obtained with preparation by acetone dispersion. That was followed by the preparations with direct dosing method and with the method of dilution of saturated concentration stock solution. Considering the results obtained, the direct dosing method with a suitable settling time may provide useful information enabling extrapolation of the test results to the natural environment for complex multicomponent compounds.

  15. Computational model for simulation small testing launcher, technical solution

    SciTech Connect

    Chelaru, Teodor-Viorel; Cristian, Barbu; Chelaru, Adrian

    2014-12-10

    The purpose of this paper is to present some aspects regarding the computational model and technical solutions for multistage suborbital launcher for testing (SLT) used to test spatial equipment and scientific measurements. The computational model consists in numerical simulation of SLT evolution for different start conditions. The launcher model presented will be with six degrees of freedom (6DOF) and variable mass. The results analysed will be the flight parameters and ballistic performances. The discussions area will focus around the technical possibility to realize a small multi-stage launcher, by recycling military rocket motors. From technical point of view, the paper is focused on national project 'Suborbital Launcher for Testing' (SLT), which is based on hybrid propulsion and control systems, obtained through an original design. Therefore, while classical suborbital sounding rockets are unguided and they use as propulsion solid fuel motor having an uncontrolled ballistic flight, SLT project is introducing a different approach, by proposing the creation of a guided suborbital launcher, which is basically a satellite launcher at a smaller scale, containing its main subsystems. This is why the project itself can be considered an intermediary step in the development of a wider range of launching systems based on hybrid propulsion technology, which may have a major impact in the future European launchers programs. SLT project, as it is shown in the title, has two major objectives: first, a short term objective, which consists in obtaining a suborbital launching system which will be able to go into service in a predictable period of time, and a long term objective that consists in the development and testing of some unconventional sub-systems which will be integrated later in the satellite launcher as a part of the European space program. This is why the technical content of the project must be carried out beyond the range of the existing suborbital vehicle

  16. Computational model for simulation small testing launcher, technical solution

    NASA Astrophysics Data System (ADS)

    Chelaru, Teodor-Viorel; Cristian, Barbu; Chelaru, Adrian

    2014-12-01

    The purpose of this paper is to present some aspects regarding the computational model and technical solutions for multistage suborbital launcher for testing (SLT) used to test spatial equipment and scientific measurements. The computational model consists in numerical simulation of SLT evolution for different start conditions. The launcher model presented will be with six degrees of freedom (6DOF) and variable mass. The results analysed will be the flight parameters and ballistic performances. The discussions area will focus around the technical possibility to realize a small multi-stage launcher, by recycling military rocket motors. From technical point of view, the paper is focused on national project "Suborbital Launcher for Testing" (SLT), which is based on hybrid propulsion and control systems, obtained through an original design. Therefore, while classical suborbital sounding rockets are unguided and they use as propulsion solid fuel motor having an uncontrolled ballistic flight, SLT project is introducing a different approach, by proposing the creation of a guided suborbital launcher, which is basically a satellite launcher at a smaller scale, containing its main subsystems. This is why the project itself can be considered an intermediary step in the development of a wider range of launching systems based on hybrid propulsion technology, which may have a major impact in the future European launchers programs. SLT project, as it is shown in the title, has two major objectives: first, a short term objective, which consists in obtaining a suborbital launching system which will be able to go into service in a predictable period of time, and a long term objective that consists in the development and testing of some unconventional sub-systems which will be integrated later in the satellite launcher as a part of the European space program. This is why the technical content of the project must be carried out beyond the range of the existing suborbital vehicle

  17. Bacteriology testing of cardiovascular tissues: comparison of transport solution versus tissue testing.

    PubMed

    Díaz Rodríguez, R; Van Hoeck, B; Mujaj, B; Ngakam, R; Fan, Y; Bogaerts, K; Jashari, R

    2016-06-01

    Bacteriology testing is mandatory for quality control of recovered cardiovascular allografts (CVA). In this paper, two different bacteriology examinations (A tests) performed before tissue antibiotic decontamination were compared: transport solution filtration analysis (A1) and tissue fragment direct incubation (A2). For this purpose, 521 CVA (326 heart and 195 artery tissues) from 280 donors were collected and analyzed by the European Homograft Bank (EHB). Transport solution (A1) tested positive in 43.25 % of hearts and in 48.21 % of arteries, whereas the tissue samples (A2) tested positive in 38.34 % of hearts and 33.85 % of arteries. The main species identified in both A1 and A2 were Staphylococcus spp. in 55 and 26 % of cases, and Propionibacterium spp. in 8 and 19 %, respectively. Mismatches in bacteriology results between both initial tests A1 and A2 were found. 18.40 % of the heart valves were identified as positive by A1 whilst 13.50 % were considered positive by A2. For arteries, 20.51 % of cases were positive in A1 and negative in A2, and just 6.15 % of artery allografts presented contamination in the A2 test but were considered negative for the A1 test. Comparison between each A test with the B and C tests after antibiotic treatment of the allograft was also performed. A total decontamination rate of 70.8 % of initial positive A tests was obtained. Due to the described mismatches and different bacteria identification percentage, utilization of both A tests should be implemented in tissue banks in order to avoid false negatives.

  18. Leak testing of cryogenic components — problems and solutions

    NASA Astrophysics Data System (ADS)

    Srivastava, S. P.; Pandarkar, S. P.; Unni, T. G.; Sinha, A. K.; Mahajan, K.; Suthar, R. L.

    2008-05-01

    moderator pot was driving the MSLD out of range. Since it was very difficult to locate the leak by Tracer Probe Method, some other technique was ventured to solve the problem of leak location. Finally, it was possible to locate the leak by observing the change in Helium background reading of MSLD during masking/unmasking of the welded joints. This paper, in general describes the design and leak testing aspects of cryogenic components of Cold Neutron Source and in particular, the problems and solutions for leak testing of transfer lines and moderator pot.

  19. Item Characteristic Curve Solutions to Three Intractable Testing Problems

    ERIC Educational Resources Information Center

    Marco, Gary L.

    1977-01-01

    This paper summarizes three studies that illustrate how application of the three-parameter logistic test model helped solve three relatively intractable testing problems. The three problems are: designing a multi-purpose test, evaluating an multi-level test, and equating a test on the basis of pretest statistics. (Author/JKS)

  20. A Process for Testing a Methematical Model for the Solution of a Practical Problem: Applications to Test Equating.

    ERIC Educational Resources Information Center

    Douglass, James B.

    A general process for testing the feasibility of applying alternative mathematical or statistical models to the solution of a practical problem is presented and flowcharted. The system is used to compare five models for test equating: (1) anchor test equating using classical test theory; (2) anchor test equating using the one-parameter logistic…

  1. Experience in testing of a solution mined storage cavern

    SciTech Connect

    Goin, K.L.

    1982-01-01

    Recertification tests were made of the U.S. Department of Energy/Strategic Petroleum Reserve oil storage cavern No. 6 in the West Hackberry, LA, salt dome. The cavern has a volume of 8,600,000 bbl. Tests included hydrostatic tests of the brine filled cavern and nitrogen leak tests of the 3 wells entering the cavern. Test procedures are described and test results are discussed.

  2. Test plan for anion exchange testing with Argonne 10-L solutions

    SciTech Connect

    Compton, J.A.

    1995-05-10

    The purpose of this test plan is to determine the performance characteristics of four anion exchange resins. This information is required to scale up an ion exchange process for removing undesirable chemicals from calciner feed at PFP. The performance characteristics will be judged by comparing the total exchange capacity, the sorption and desorption of plutonium, the distribution coefficient, and other operating information in the presence of various complexing anions. The results will be compared to a similar process using organic extractants to determine the best way of removing the undesirable chemicals from the plutonium solutions.

  3. Effect of Fenbendazole on Three Behavioral Tests in Male C57BL/6N Mice

    PubMed Central

    Gadad, Bharathi S; Daher, João P L; Hutchinson, Eric K; Brayton, Cory F; Dawson, Ted M; Pletnikov, Mikhail V; Watson, Julie

    2010-01-01

    Pinworms are highly contagious parasites of laboratory rodents that often are treated with fenbendazole. To our knowledge, the effect of fenbendazole at therapeutic dosages on behavioral tests in mice has not been evaluated. Here we studied 6-wk-old male C57BL/6N mice. We compared the behavior of control mice (fed regular diet) with 3 groups of mice treated with dietary fenbendazole. Treatment groups were 4 wk of fenbendazole, 2 wk of fenbendazole followed by 2 wk of regular diet, and 2 wk of regular diet followed by 2 wk of fenbendazole. At the end of dietary treatment all groups were tested by open field for central, peripheral and vertical activity; elevated plus maze for anxiety; and rotarod for motor ability and then evaluated by clinical pathology and selected histopathology. Treated and control groups showed no differences in open field or elevated plus maze testing, histopathology, or clinical pathology. However mice treated for 4 wk with fenbendazole or 2 wk of fenbendazole followed by 2 wk regular diet stayed on the rotarod for shorter periods than did controls, and mice treated with 2 wk of regular diet followed by 2 wk fenbendazole showed a trend toward shorter rotarod times. In light of this study, we suggest that open field and elevated plus maze testing is unlikely to be affected by 4 wk fenbendazole treatment in male C57BL/6 mice; however, behavioral tests of motor ability such as rotarod tests may be affected during and for at least 2 wk after fenbendazole treatment. PMID:21205447

  4. Effect of fenbendazole on three behavioral tests in male C57BL/6N mice.

    PubMed

    Gadad, Bharathi S; Daher, João P L; Hutchinson, Eric K; Brayton, Cory F; Dawson, Ted M; Pletnikov, Mikhail V; Watson, Julie

    2010-11-01

    Pinworms are highly contagious parasites of laboratory rodents that often are treated with fenbendazole. To our knowledge, the effect of fenbendazole at therapeutic dosages on behavioral tests in mice has not been evaluated. Here we studied 6-wk-old male C57BL/6N mice. We compared the behavior of control mice (fed regular diet) with 3 groups of mice treated with dietary fenbendazole. Treatment groups were 4 wk of fenbendazole, 2 wk of fenbendazole followed by 2 wk of regular diet, and 2 wk of regular diet followed by 2 wk of fenbendazole. At the end of dietary treatment all groups were tested by open field for central, peripheral and vertical activity; elevated plus maze for anxiety; and rotarod for motor ability and then evaluated by clinical pathology and selected histopathology. Treated and control groups showed no differences in open field or elevated plus maze testing, histopathology, or clinical pathology. However mice treated for 4 wk with fenbendazole or 2 wk of fenbendazole followed by 2 wk regular diet stayed on the rotarod for shorter periods than did controls, and mice treated with 2 wk of regular diet followed by 2 wk fenbendazole showed a trend toward shorter rotarod times. In light of this study, we suggest that open field and elevated plus maze testing is unlikely to be affected by 4 wk fenbendazole treatment in male C57BL/6 mice; however, behavioral tests of motor ability such as rotarod tests may be affected during and for at least 2 wk after fenbendazole treatment.

  5. Cosmological solutions in bimetric gravity and their observational tests

    SciTech Connect

    Strauss, Mikael von; Schmidt-May, Angnis; Enander, Jonas; Mörtsell, Edvard; Hassan, S.F. E-mail: angnis.schmidt-may@fysik.su.se E-mail: edvard@fysik.su.se

    2012-03-01

    We obtain the general cosmological evolution equations for a classically consistent theory of bimetric gravity. Their analytic solutions are demonstrated to generically allow for a cosmic evolution starting out from a matter dominated FLRW universe and relaxing towards a de Sitter (anti-de Sitter) phase at late cosmic time. In particular, we examine a subclass of models which contain solutions that are able to reproduce the expansion history of the cosmic concordance model inspite of the nonlinear couplings of the two metrics. This is demonstrated explicitly by fitting these models to observational data from Type Ia supernovae, Cosmic Microwave Background and Baryon Acoustic Oscillations. In the appendix we comment on the relation to massive gravity.

  6. Dermatotoxicologic clinical solutions: textile dye dermatitis patch testing.

    PubMed

    Coman, Garrett; Blickenstaff, Nicholas; Edwards, Ashley; Maibach, Howard

    2015-03-01

    The authors provide a framework for working up and counseling a patient with suspected textile dermatitis, focusing on identifying which textile materials are most likely to be the cause of the eczematous lesions, the current clinical guidelines, the utility and appropriateness of patch testing, the limitations of these guidelines, and our pro tempore recommendations. While there are many challenges to correctly identify and counsel patients on how to avoid the offending textile products in a patient with suspected textile dye dermatitis, there is value in following the guidelines set forth to help identify the causative textile(s). Although patch tests can be useful, dermatologists should understand the limitations of standardized patch testing for patients with suspected textile dye-induced dermatitis. These guidelines are expected to increase the likelihood of identifying the causative textile(s), so that patch testing can be supplemented with swatch testing and chemical dye extraction to help discover the allergenic dye.

  7. Test plan for demonstrating plutonium extraction from 10-L solutions using EIChrom extraction chromatographic resins

    SciTech Connect

    Barney, G.S.

    1994-08-15

    Corrosive plutonium solutions stored in 10-L containers at the Plutonium Finishing Plant must be treated to convert the plutonium to a safe, solid form for storage and to remove the americium so that radiation exposure can be reduced. Extraction chromatographic resins will be tested for separating plutonium from these solutions in the laboratory. Separation parameters will be developed during the testing for large scale processing of the 10-L solutions and solutions of similar composition. Use of chromatographic resins will allow plutonium separation with minimum of chemical addition to the feed and without the need for plutonium valence adjustment. The separated plutonium will be calcined to plutonium oxide by direct solution calcination.

  8. Analytical solutions for efficient interpretation of single-well push-pull tracer tests

    EPA Science Inventory

    Single-well push-pull tracer tests have been used to characterize the extent, fate, and transport of subsurface contamination. Analytical solutions provide one alternative for interpreting test results. In this work, an exact analytical solution to two-dimensional equations descr...

  9. Technology Solutions Case Study: Combustion Safety Simplified Test Protocol

    SciTech Connect

    L. Brand, D. Cautley, D. Bohac, P. Francisco, L. Shen, and S. Gloss

    2015-12-01

    Combustions safety is an important step in the process of upgrading homes for energy efficiency. There are several approaches used by field practitioners, but researchers have indicated that the test procedures in use are complex to implement and provide too many false positives. Field failures often mean that the house is not upgraded until after remediation or not at all, if not include in the program. In this report the PARR and NorthernSTAR DOE Building America Teams provide a simplified test procedure that is easier to implement and should produce fewer false positives.

  10. Distributed training, testing, and decision aids within one solution

    NASA Astrophysics Data System (ADS)

    Strini, Robert A.; Strini, Keith

    2002-07-01

    Military air operations in the European theater require U.S. and NATO participants to send various mission experts to 10 Combined Air Operations Centers (CAOCs). Little or no training occurs prior to their arrival for tours of duty ranging between 90 days to 3 years. When training does occur, there is little assessment of its effectiveness in raising CAOC mission readiness. A comprehensive training management system has been developed that utilizes traditional and web based distance-learning methods for providing instruction and task practice as well as distributed simulation to provide mission rehearsal training opportunities on demand for the C2 warrior. This system incorporates new technologies, such as voice interaction and virtual tutors, and a Learning Management System (LMS) that tracks trainee progress from academic learning through procedural practice and mission training exercises. Supervisors can monitor their subordinate's progress through synchronous or asynchronous methods. Embedded within this system are virtual tutors, which provide automated performance measurement as well as tutoring. The training system offers a true time management savings for current instructors and training providers that today must perform On the Job Training (OJT) duties before, during and after each event. Many units do not have the resources to support OJT and are forced to maintain an overlap of several days to minimally maintain unit readiness. One CAOC Commander affected by this paradigm has advocated supporting a beta version of this system to test its ability to offer training on-demand and track the progress of its personnel and unit readiness. If successful, aircrew simulation devices can be connected through either Distributed Interactive Simulation or High Level Architecture methods to provide a DMT-C2 air operations training environment in Europe. This paper presents an approach to establishing a training, testing and decision aid capability and means to assess

  11. Interfering Effects of Test Anxiety on Test Performance: A Growing Educational Problem and Solutions to It.

    ERIC Educational Resources Information Center

    Hill, Kennedy T.

    1983-01-01

    Reviews a 20-year program of research on motivation and test performance, concluding that test anxiety and test-taking skill deficits are distorting factors in efforts to test student aptitude, achievement, and competency. (FL)

  12. Testing and benchmarking of a three-dimensional groundwater flow and solute transport model

    SciTech Connect

    Sims, P.N.; Andersen, P.F.; Faust, C.R.; Stephenson, D.E.

    1988-12-31

    A three-dimensional finite-difference model was developed to simulate groundwater flow and solute transport. The model is intended for application to a variety of groundwater resource and solute migration evaluations, including several complex sites at the Savannah River Plant (SRP). Because the model, FTWORK, is relatively new, there is a need to provide confidence in the model results. Methodologies that test models include comparisons with analytical solutions, comparisons with empirical data, and checking that conservation properties hold. Another level of testing is the comparison of one code against another. This paper describes the testing and benchmarking procedure used to verify the validate FTWORK.

  13. Medical Physics: Forming and testing solutions to clinical problems.

    PubMed

    Tsapaki, Virginia; Bayford, Richard

    2015-11-01

    According to the European Federation of Organizations for Medical Physics (EFOMP) policy statement No. 13, "The rapid advance in the use of highly sophisticated equipment and procedures in the medical field increasingly depends on information and communication technology. In spite of the fact that the safety and quality of such technology is vigorously tested before it is placed on the market, it often turns out that the safety and quality is not sufficient when used under hospital working conditions. To improve safety and quality for patient and users, additional safeguards and related monitoring, as well as measures to enhance quality, are required. Furthermore a large number of accidents and incidents happen every year in hospitals and as a consequence a number of patients die or are injured. Medical Physicists are well positioned to contribute towards preventing these kinds of events". The newest developments related to this increasingly important medical speciality were presented during the 8th European Conference of Medical Physics 2014 which was held in Athens, 11-13 September 2014 and hosted by the Hellenic Association of Medical Physicists (HAMP) in collaboration with the EFOMP and are summarized in this issue.

  14. Double forced gradient tracer test: Performance and interpretation of a field test using a new solute transport model

    NASA Astrophysics Data System (ADS)

    Vandenbohede, A.; Lebbe, L.

    2006-02-01

    A double forced gradient tracer test was performed in heterogeneous quaternary deposits of the Scheldt river in Belgium. The objectives of the test were to derive reliable hydraulic and solute transport parameters, to study the heterogeneity of the groundwater reservoir and to illustrate the practical utility of forced gradient tracer tests. Salt water was used as a conservative tracer. The tracer was injected with two injection wells and both plumes were pumped towards one intermediately placed pumping well. Before the forced gradient tracer test a short lasting pumping test was performed. Drawdown and concentration measurements were made in different observation wells during the pumping and forced gradient tracer test. The movement of the salt water was followed by measuring the electrical conductivity of the sediments around observation wells using a focussed electromagnetic induction method. The drawdown and concentration observations were then interpreted together. By combining these two sets of data, hydraulic and solute transport parameters were derived simultaneously and more accurately than in the case only one type of data is used. For this, a new 3D solute transport model TRACER3D, specifically designed to simulate accurately flow and solute transport towards a well, was developed. The behaviour of the two tracer plumes was totally different due to varying hydraulic and dispersive properties in the aquifer. Horizontal and vertical conductivity, specific elastic storage, effective porosity and longitudinal dispersivity were derived and brought into relation with the site's heterogeneity, visualised by natural gamma logs in the different wells.

  15. Rogue waves: from nonlinear Schrödinger breather solutions to sea-keeping test.

    PubMed

    Onorato, Miguel; Proment, Davide; Clauss, Günther; Klein, Marco

    2013-01-01

    Under suitable assumptions, the nonlinear dynamics of surface gravity waves can be modeled by the one-dimensional nonlinear Schrödinger equation. Besides traveling wave solutions like solitons, this model admits also breather solutions that are now considered as prototypes of rogue waves in ocean. We propose a novel technique to study the interaction between waves and ships/structures during extreme ocean conditions using such breather solutions. In particular, we discuss a state of the art sea-keeping test in a 90-meter long wave tank by creating a Peregrine breather solution hitting a scaled chemical tanker and we discuss its potential devastating effects on the ship.

  16. An Analytical Solution for Slug-Tracer Tests in FracturedReservoirs

    SciTech Connect

    Shan, Chao; Pruess, Karsten

    2005-03-02

    The transport of chemicals or heat in fractured reservoirs is strongly affected by the fracture-matrix interfacial area. In a vapor-dominated geothermal reservoir, this area can be estimated by inert gas tracer tests, where gas diffusion between the fracture and matrix causes the tracer breakthrough curve (BTC) to have a long tail determined by the interfacial area. For water-saturated conditions, recent studies suggest that sorbing solute tracers can also generate strong tails in BTCs that may allow a determination of the fracture-matrix interfacial area. To theoretically explore such a useful phenomenon, this paper develops an analytical solution for BTCs in slug-tracer tests in a water-saturated fractured reservoir. The solution shows that increased sorption should have the same effect on BTCs as an increase of the diffusion coefficient. The solution is useful for understanding transport mechanisms, verifying numerical codes, and for identifying appropriate chemicals as tracers for the characterization of fractured reservoirs.

  17. Summary of Tests to Determine Effectiveness of Gelatin Strike on SS{ampersand}C Dissolver Solutions

    SciTech Connect

    Murray, A.M.; Karraker, D.G.

    1998-05-01

    The solutions from the dissolution of sand, slag, and crucible (SS&C) material are sufficiently different from previous solutions processed via the F-Canyon Purex process that the effectiveness of individual process steps needed to be ascertained. In this study, the effectiveness of gelatin strike was tested under a variety of conditions. Specifically, several concentrations of silica, fluoride, nitric acid (HNO{sub 3}), boric acid (H{sub 3}BO{sub 3}), and aluminium nitrate nonahydrate (ANN) were studied. The disengagement times of surrogate and plant SS&C dissolver solutions from plant solvent also were measured. The results of the tests indicate that gelatin strike does not coagulate the silica at the low concentration of silica ({tilde 30} ppm) expected in the SS&C dissolver solutions because the silicon is complexed with fluoride ions (e.g., SiF{sub 6}{sup -2}). The silicon fluoride complex is expected to remain with the aqueous phase during solvent extraction. The disengagement times of the dissolver solutions from the plant solvent were not affected by the presence of low concentrations of silica and no third phase formation was observed in the disengagement phase with the low silica concentrations. Tests of surrogate SS&C dissolver solutions with higher concentration of silica (less than 150 ppm) did show that gelatin strike followed by centrifugation resulted in good phase disengagement of the surrogate SS{ampersand}C dissolver solution from the plant dissolver solution. At the higher silica concentrations, there is not sufficient fluoride to complex with the silica, and the silica must be entrained by the gelatin and removed from the dissolver solution prior to solvent extraction.

  18. A new algorithm for generating highly accurate benchmark solutions to transport test problems

    SciTech Connect

    Azmy, Y.Y.

    1997-06-01

    We present a new algorithm for solving the neutron transport equation in its discrete-variable form. The new algorithm is based on computing the full matrix relating the scalar flux spatial moments in all cells to the fixed neutron source spatial moments, foregoing the need to compute the angular flux spatial moments, and thereby eliminating the need for sweeping the spatial mesh in each discrete-angular direction. The matrix equation is solved exactly in test cases, producing a solution vector that is free from iteration convergence error, and subject only to truncation and roundoff errors. Our algorithm is designed to provide method developers with a quick and simple solution scheme to test their new methods on difficult test problems without the need to develop sophisticated solution techniques, e.g. acceleration, before establishing the worthiness of their innovation. We demonstrate the utility of the new algorithm by applying it to the Arbitrarily High Order Transport Nodal (AHOT-N) method, and using it to solve two of Burre`s Suite of Test Problems (BSTP). Our results provide highly accurate benchmark solutions, that can be distributed electronically and used to verify the pointwise accuracy of other solution methods and algorithms.

  19. Mutagenicity evaluation with Ames test of hydro-alcoholic solution of terpenes.

    PubMed

    Lupi, S; Marconi, S; Paiaro, E; Fochesato, A; Gregorio, P

    2009-09-01

    Mutagenic properties of terpenes (both synthesis and plant derived) have been tested, up to now, as a single molecule. A terpenes containing hydro-alcoholic solution deriving from frankincense and myrrh resins and hyssop essential oil was assayed for mutagenicity by means of ames test. Extraction technique conducted with electromagnetic fields at room temperature enabled to obtain a solution of free active molecules that did not undergo thermal degradation and characterized by biocidal activity. In order to verify lack of mutagenic hazard in coming into contact with human, the solution was appropriately diluted and tested with Salmonella typhimurium TA98, TA1535 and YG1024 strains, both in absence and in presence of metabolic system S9. For none of the tested conditions a 2-fold increase of induced revertants, as regards to spontaneous, was registered. The ratio between induced and spontaneous His+ revertants (Mutagenic Index) was around 1.00 in all the determinations and no statistically significant differences have been identified comparing the sample and the negative control. A similar result has been obtained for the dose-response curve. In conclusion, we verified that tested terpenes solution lacks of mutagenicity on Salmonella typhimurium with and without metabolic activator so this plant extract can be safely used as biocide. PMID:20411651

  20. [In vitro tests of internal tooth whitening agents on colored solutions do not replace tests on teeth].

    PubMed

    Bäumler, Marc A; Schug, Jens; Schmidlin, PatrickR; Imfeld, Thomas

    2006-01-01

    Two in vitro tests for the assessment of whitening agents were evaluated. A simple, reproducible and cost-effective model using coloured solutions was compared to a tooth model. The following bleaching agents were investigated: 1) Sodium perborate tetrahydrate/30% H2O2, 2) sodium perborate tetrahydrate/3% H2O2, 3) thermocatalytic procedure with 30% H2O2 and 4) Opal-escence Endo. In the model using coloured solutions, the light absorption of the solutions was assessed one and 24 hours after application of the whitening agents. In discoloured teeth, whitening agents were placed in a simulated access cavity. In groups 1, 2, and 4, the agents were left in the cavity for three days, whereas in group 3 the substance was applied three times for 30 seconds. Bleaching processes were repeated three times. All bleaching agents proved effective in the model with coloured solutions, as well as in the tooth model. The effect was most pronounced after the first bleaching step. The results showed, however, that the simplified experiment with coloured solutions cannot replace the tooth model.

  1. Analytical Solutions Involving Shock Waves for Testing Debris Avalanche Numerical Models

    NASA Astrophysics Data System (ADS)

    Mungkasi, Sudi; Roberts, Stephen Gwyn

    2012-10-01

    Analytical solutions to debris avalanche problems involving shock waves are derived. The debris avalanche problems are described in two different coordinate systems, namely, the standard Cartesian and topography-linked coordinate systems. The analytical solutions can then be used to test debris avalanche numerical models. In this article, finite volume methods are applied as the numerical models. We compare the performance of the finite volume method with reconstruction of the conserved quantities based on stage, height, and velocity to that of the conserved quantities based on stage, height, and momentum for solving the debris avalanche problems involving shock waves. The numerical solutions agree with the analytical solution. In addition, both reconstructions lead to similar numerical results. This article is an extension of the work of Mangeney et al. (Pure Appl Geophys 157(6-8):1081-1096, 2000).

  2. An investigation into the stability and sterility of citric acid solutions used for cough reflex testing.

    PubMed

    Falconer, James R; Wu, Zimei; Lau, Hugo; Suen, Joanna; Wang, Lucy; Pottinger, Sarah; Lee, Elaine; Alazawi, Nawar; Kallesen, Molly; Gargiulo, Derryn A; Swift, Simon; Svirskis, Darren

    2014-10-01

    Citric acid is used in cough reflex testing in clinical and research settings to assess reflexive cough in patients at risk of swallowing disorders. To address a lack of knowledge in this area, this study investigated the stability and sterility of citric acid solutions. Triplicate solutions of citric acid (0.8 M) in isotonic saline were stored at 4 ± 2 °C for up to 28 days and analysed by high-performance liquid chromatography. Microbiological sterility of freshly prepared samples and bulk samples previously used for 2 weeks within the hospital was determined using a pour plate technique. Microbial survival in citric acid was determined by inoculating Staphylococcus aureus, Escherichia coli, or Candida albicans into citric acid solution and monitoring the number of colony-forming units/mL over 40 min. Citric acid solutions remained stable at 4 °C for 28 days (98.4 ± 1.8 % remained). The freshly prepared and clinical samples tested were sterile. However, viability studies revealed that citric acid solution allows for the survival of C. albicans but not for S. aureus or E. coli. The microbial survival study showed that citric acid kills S. aureus and E. coli but has no marked effect on C. albicans after 40 min. Citric acid samples at 0.8 M remained stable over the 4-week testing period, with viable microbial cells absent from samples tested. However, C. albicans has the ability to survive in citric acid solution if inadvertently introduced in practice. For this reason, in clinical and research practice it is suggested to use single-use aliquots prepared aseptically which can be stored for up to 28 days at 4 °C.

  3. EDISON-WMW: Exact Dynamic Programing Solution of the Wilcoxon-Mann-Whitney Test.

    PubMed

    Marx, Alexander; Backes, Christina; Meese, Eckart; Lenhof, Hans-Peter; Keller, Andreas

    2016-02-01

    In many research disciplines, hypothesis tests are applied to evaluate whether findings are statistically significant or could be explained by chance. The Wilcoxon-Mann-Whitney (WMW) test is among the most popular hypothesis tests in medicine and life science to analyze if two groups of samples are equally distributed. This nonparametric statistical homogeneity test is commonly applied in molecular diagnosis. Generally, the solution of the WMW test takes a high combinatorial effort for large sample cohorts containing a significant number of ties. Hence, P value is frequently approximated by a normal distribution. We developed EDISON-WMW, a new approach to calculate the exact permutation of the two-tailed unpaired WMW test without any corrections required and allowing for ties. The method relies on dynamic programing to solve the combinatorial problem of the WMW test efficiently. Beyond a straightforward implementation of the algorithm, we presented different optimization strategies and developed a parallel solution. Using our program, the exact P value for large cohorts containing more than 1000 samples with ties can be calculated within minutes. We demonstrate the performance of this novel approach on randomly-generated data, benchmark it against 13 other commonly-applied approaches and moreover evaluate molecular biomarkers for lung carcinoma and chronic obstructive pulmonary disease (COPD). We found that approximated P values were generally higher than the exact solution provided by EDISON-WMW. Importantly, the algorithm can also be applied to high-throughput omics datasets, where hundreds or thousands of features are included. To provide easy access to the multi-threaded version of EDISON-WMW, a web-based solution of our algorithm is freely available at http://www.ccb.uni-saarland.de/software/wtest/. PMID:26829645

  4. EDISON-WMW: Exact Dynamic Programing Solution of the Wilcoxon–Mann–Whitney Test

    PubMed Central

    Marx, Alexander; Backes, Christina; Meese, Eckart; Lenhof, Hans-Peter; Keller, Andreas

    2016-01-01

    In many research disciplines, hypothesis tests are applied to evaluate whether findings are statistically significant or could be explained by chance. The Wilcoxon–Mann–Whitney (WMW) test is among the most popular hypothesis tests in medicine and life science to analyze if two groups of samples are equally distributed. This nonparametric statistical homogeneity test is commonly applied in molecular diagnosis. Generally, the solution of the WMW test takes a high combinatorial effort for large sample cohorts containing a significant number of ties. Hence, P value is frequently approximated by a normal distribution. We developed EDISON-WMW, a new approach to calculate the exact permutation of the two-tailed unpaired WMW test without any corrections required and allowing for ties. The method relies on dynamic programing to solve the combinatorial problem of the WMW test efficiently. Beyond a straightforward implementation of the algorithm, we presented different optimization strategies and developed a parallel solution. Using our program, the exact P value for large cohorts containing more than 1000 samples with ties can be calculated within minutes. We demonstrate the performance of this novel approach on randomly-generated data, benchmark it against 13 other commonly-applied approaches and moreover evaluate molecular biomarkers for lung carcinoma and chronic obstructive pulmonary disease (COPD). We found that approximated P values were generally higher than the exact solution provided by EDISON-WMW. Importantly, the algorithm can also be applied to high-throughput omics datasets, where hundreds or thousands of features are included. To provide easy access to the multi-threaded version of EDISON-WMW, a web-based solution of our algorithm is freely available at http://www.ccb.uni-saarland.de/software/wtest/. PMID:26829645

  5. Swing arm profilometer: analytical solutions of misalignment errors for testing axisymmetric optics

    NASA Astrophysics Data System (ADS)

    Xiong, Ling; Luo, Xiao; Liu, Zhenyu; Wang, Xiaokun; Hu, Haixiang; Zhang, Feng; Zheng, Ligong; Zhang, Xuejun

    2016-07-01

    The swing arm profilometer (SAP) has been playing a very important role in testing large aspheric optics. As one of most significant error sources that affects the test accuracy, misalignment error leads to low-order errors such as aspherical aberrations and coma apart from power. In order to analyze the effect of misalignment errors, the relation between alignment parameters and test results of axisymmetric optics is presented. Analytical solutions of SAP system errors from tested mirror misalignment, arm length L deviation, tilt-angle θ deviation, air-table spin error, and air-table misalignment are derived, respectively; and misalignment tolerance is given to guide surface measurement. In addition, experiments on a 2-m diameter parabolic mirror are demonstrated to verify the model; according to the error budget, we achieve the SAP test for low-order errors except power with accuracy of 0.1 μm root-mean-square.

  6. Protein Conformational Flexibility Enables the Formation of Dense Liquid Clusters: Tests Using Solution Shear.

    PubMed

    Byington, Michael C; Safari, Mohammad S; Conrad, Jacinta C; Vekilov, Peter G

    2016-07-01

    According to recently proposed two-step nucleation mechanisms, crystal nuclei form within preexisting dense liquid clusters. Clusters with radii about 100 nm, which capture from 10(-7) to 10(-3) of the total protein, have been observed with numerous proteins and shown to host crystal nucleation. Theories aiming to understand the mesoscopic size and small protein fraction held in the clusters have proposed that in solutions of single-chain proteins, the clusters consist of partially misfolded protein molecules. To test this conjecture, we perturb the protein conformation by shearing solutions of the protein lysozyme. We demonstrate that shear rates greater than a threshold applied for longer than 1 h reduce the volume of the cluster population. The likely mechanism of the observed response involves enhanced partial unfolding of lysozyme molecules, which exposes hydrophobic surfaces between the constituent domains to the aqueous solution. PMID:27267087

  7. A convenient test for lipase activity in aqueous-based solutions.

    PubMed

    Guo, Jin; Chen, Cheng-Peng; Wang, Shu-Gen; Huang, Xiao-Jun

    2015-04-01

    We proposed a convenient and accurate method for the measurement of lipase activity in a uniform aqueous-based substrate solution. In this work, lipase from Candida rugosa was used as the model lipase to test its catalytic ability toward p-nitrophenyl palmitate (p-NPP), which was suspended in a mixture of p-NPP ethanol solution and buffer. An ultraviolet-visible spectrophotometer was used to efficiently measure the liberated p-nitrophenol without extraction or centrifugation. Several factors that affected lipase activity were investigated, such as the ratio of p-NPP ethanol solution to buffer, the concentrations of p-NPP and lipase, as well as the temperature, reaction time, pH and agitation rate. Additionally, enzyme catalytic parameters such as Km, Vm and "activation energy" were also assessed. We determined the optimal conditions for lipase in this homogeneous system and demonstrated lipase's catalytic performance in this condition followed Michealis-Menten kinetics. PMID:25765304

  8. A convenient test for lipase activity in aqueous-based solutions.

    PubMed

    Guo, Jin; Chen, Cheng-Peng; Wang, Shu-Gen; Huang, Xiao-Jun

    2015-04-01

    We proposed a convenient and accurate method for the measurement of lipase activity in a uniform aqueous-based substrate solution. In this work, lipase from Candida rugosa was used as the model lipase to test its catalytic ability toward p-nitrophenyl palmitate (p-NPP), which was suspended in a mixture of p-NPP ethanol solution and buffer. An ultraviolet-visible spectrophotometer was used to efficiently measure the liberated p-nitrophenol without extraction or centrifugation. Several factors that affected lipase activity were investigated, such as the ratio of p-NPP ethanol solution to buffer, the concentrations of p-NPP and lipase, as well as the temperature, reaction time, pH and agitation rate. Additionally, enzyme catalytic parameters such as Km, Vm and "activation energy" were also assessed. We determined the optimal conditions for lipase in this homogeneous system and demonstrated lipase's catalytic performance in this condition followed Michealis-Menten kinetics.

  9. Solubility of drugs in aqueous solutions. Part 5. Thermodynamic consistency test for the solubility data.

    PubMed

    Ruckenstein, E; Shulgin, I

    2005-03-23

    This paper is devoted to the verification of the quality of experimental data regarding the solubility of sparingly soluble solids, such as drugs, environmentally important substances, etc. in mixed solvents. A thermodynamic consistency test based on the Gibbs-Duhem equation for ternary mixtures is suggested. This test has the form of an equation, which connects the solubilities of the solid, and the activity coefficients of the constituents of the solute-free mixed solvent in two mixed solvents of close compositions. The experimental data regarding the solubility of sparingly soluble substances can be verified with the suggested test if accurate data for the activity coefficients of the constituents of the solute-free mixed solvent are available. The test was applied to a number of systems representing the solubilities of sparingly soluble substances in mixed solvents. First, the test was scrutinized for four nonaqueous systems for which accurate solubility data were available. Second, the suggested test was applied to a number of systems representing experimental data regarding the solubility of sparingly soluble substances in aqueous mixed solvents.

  10. Preliminary tests of a possible outdoor light adaptation solution for a fly inspired visual sensor: a biomimetic solution - biomed 2011.

    PubMed

    Dean, Brian K; Wright, Cameron H G; Barrett, Steven F

    2011-01-01

    Two previous papers, presented at RMBS in 2009 and 2010, introduced a fly inspired vision sensor that could adapt to indoor light conditions by mimicking the light adaptation process of the commonhousefly, Muscadomestica. A new system has been designed that should allow the sensor to adapt to outdoor light conditions which will enable the sensor’s use inapplications such as: unmanned aerial vehicle (UAV) obstacle avoidance, UAV landing support, target tracking, wheelchair guidance, large structure monitoring, and many other outdoor applications. A sensor of this type is especially suited for these applications due to features of hyperacuity (or an ability to achieve movement resolution beyond the theoretical limit), extreme sensitivity to motion, and (through software simulation) image edge extraction, motion detection, and orientation and location of a line.Many of these qualities are beyond the ability of traditional computervision sensors such as charge coupled device (CCD) arrays.To achieve outdoor light adaptation, a variety of design obstacles have to be overcome such as infrared interference, dynamic range expansion, and light saturation. The newly designed system overcomes the latter two design obstacles by mimicking the fly’s solution of logarithmic compression followed by removal of the average background light intensity. This paper presents the new design and the preliminary tests that were conducted to determine its effectiveness. PMID:21525612

  11. Preliminary tests of a possible outdoor light adaptation solution for a fly inspired visual sensor: a biomimetic solution - biomed 2011.

    PubMed

    Dean, Brian K; Wright, Cameron H G; Barrett, Steven F

    2011-01-01

    Two previous papers, presented at RMBS in 2009 and 2010, introduced a fly inspired vision sensor that could adapt to indoor light conditions by mimicking the light adaptation process of the commonhousefly, Muscadomestica. A new system has been designed that should allow the sensor to adapt to outdoor light conditions which will enable the sensor’s use inapplications such as: unmanned aerial vehicle (UAV) obstacle avoidance, UAV landing support, target tracking, wheelchair guidance, large structure monitoring, and many other outdoor applications. A sensor of this type is especially suited for these applications due to features of hyperacuity (or an ability to achieve movement resolution beyond the theoretical limit), extreme sensitivity to motion, and (through software simulation) image edge extraction, motion detection, and orientation and location of a line.Many of these qualities are beyond the ability of traditional computervision sensors such as charge coupled device (CCD) arrays.To achieve outdoor light adaptation, a variety of design obstacles have to be overcome such as infrared interference, dynamic range expansion, and light saturation. The newly designed system overcomes the latter two design obstacles by mimicking the fly’s solution of logarithmic compression followed by removal of the average background light intensity. This paper presents the new design and the preliminary tests that were conducted to determine its effectiveness.

  12. Pilot-scale decontamination solution test results HGTP-93-0702-02

    SciTech Connect

    Clemmer, R.G.; Allen, R.P.; Bagaasen, L.M.; Fetrow, L.K.

    1993-05-01

    Decontamination solution testing constitutes a task of the Hanford Grout Technology Program (HGTP) at Pacific Northwest Laboratory (PNL). The HGTP provides technical support to the Westinghouse Hanford Company (WHC) Grout Disposal Program. Cementitious grout has been identified as the waste form for low-level radioactive waste. Grout processing equipment, including mixers, pumps, and piping, will require periodic maintenance. Decontamination of components is needed to reduce radiation dose to maintenance workers. The purpose of this work was to develop and test methods for decontaminating grout processing equipment. The proposed method of decontamination is to use a mild chemical solution, such as a 6 N citric acid to dissolve the grout. The method should effectively remove grout without causing degradation of grout processing equipment.

  13. Verification of cardiac mechanics software: benchmark problems and solutions for testing active and passive material behaviour

    PubMed Central

    Gurev, Viatcheslav; Arens, Sander; Augustin, Christoph M.; Baron, Lukas; Blake, Robert; Bradley, Chris; Castro, Sebastian; Crozier, Andrew; Favino, Marco; Fastl, Thomas E.; Fritz, Thomas; Gao, Hao; Gizzi, Alessio; Griffith, Boyce E.; Hurtado, Daniel E.; Krause, Rolf; Luo, Xiaoyu; Nash, Martyn P.; Pezzuto, Simone; Plank, Gernot; Rossi, Simone; Ruprecht, Daniel; Seemann, Gunnar; Smith, Nicolas P.; Sundnes, Joakim; Rice, J. Jeremy; Trayanova, Natalia; Wang, Dafang; Jenny Wang, Zhinuo; Niederer, Steven A.

    2015-01-01

    Models of cardiac mechanics are increasingly used to investigate cardiac physiology. These models are characterized by a high level of complexity, including the particular anisotropic material properties of biological tissue and the actively contracting material. A large number of independent simulation codes have been developed, but a consistent way of verifying the accuracy and replicability of simulations is lacking. To aid in the verification of current and future cardiac mechanics solvers, this study provides three benchmark problems for cardiac mechanics. These benchmark problems test the ability to accurately simulate pressure-type forces that depend on the deformed objects geometry, anisotropic and spatially varying material properties similar to those seen in the left ventricle and active contractile forces. The benchmark was solved by 11 different groups to generate consensus solutions, with typical differences in higher-resolution solutions at approximately 0.5%, and consistent results between linear, quadratic and cubic finite elements as well as different approaches to simulating incompressible materials. Online tools and solutions are made available to allow these tests to be effectively used in verification of future cardiac mechanics software. PMID:26807042

  14. Development anmd testing of electrophoresis solutions. Task I.1: Development of optimal buffer system

    NASA Technical Reports Server (NTRS)

    1985-01-01

    Two buffers were explored for testing: low ionic strength electrophoresis buffer with and without density gradient material. It was found that the electrophoresis routine was better tolerated when Ficoll was present. The results of a viability study of primary human fetal kidney (HFK-1) cells at the first passage are shown. Cell strain HFK-1 was used in several experiments at the first and second passage. The HFK consisted mainly of fibroblasts, and HFK-1 has a high epithelioid cell content. The chromosomes of HFK were examined and found to be euploid. The stock medium for cell electrophoresis is described. In this solution density gradient solutes such as sucrose and Ficoll are dissolved to bring the osmolarity to 0.30. Its ionic strength is less than 0.01M, and its conductivity is usually 0.0011 mho/cm. Methods for viability determination included direct microscopic counting of the percent cells attached and spread within 24 hr of plating test cultures or electrophoretically separated fractions. The Cytograf viability assay concept was tested, and shown that blue stained cells scatter less light into the 0.8 to 3.3 deg angular interval than do unstained cells.

  15. Specific wavelength colorimeter. [for measuring given solute concentration in test sample

    NASA Technical Reports Server (NTRS)

    Brawner, C. C.; Mcdavid, L. S.; Walsh, J. M. (Inventor)

    1974-01-01

    A self contained, specific wavelength, single beam colorimeter is described for direct spectrophotometric measurement of the concentration of a given solute in a test sample. An electrical circuit employing a photoconductive cell converts the optical output into a linear, directly readable meter output. The colorimeter is simple to operate and is adapted for use in zero gravity conditions. In a specific application, the colorimeter is designed to analyze the concentration of iodine in potable water carried aboard a space vehicle such as the 4B stage of Skylab.

  16. Motion of the charged test particles in Kerr-Newman-Taub-NUT spacetime and analytical solutions

    NASA Astrophysics Data System (ADS)

    Cebeci, Hakan; Özdemir, Nülifer; Şentorun, Seçil

    2016-05-01

    In this work, we study the motion of charged test particles in Kerr-Newman-Taub-NUT spacetime. We analyze the angular and the radial parts of the orbit equations and examine the possible orbit types. We also investigate the spherical orbits and their stabilities. Furthermore, we obtain the analytical solutions of the equations of motion and express them in terms of Jacobian and Weierstrass elliptic functions. Finally, we discuss the observables of the bound motion and calculate the perihelion shift and Lense-Thirring effect for the bound orbits.

  17. A Process for Testing a Mathematical Model for the Solution of a Practical Problem: Application to Test Equating. LES Paper on Learning and Teaching. Paper #79.

    ERIC Educational Resources Information Center

    Douglass, James B.

    A general process for testing the feasibility of applying alternative mathematical or statistical models to the solution of a practical problem is presented and flowcharted. The system is used to develop a plan to compare models for test equating. The five alternative models to be considered for equating are: (1) anchor test equating using…

  18. Accuracy, Precision, Ease-Of-Use, and Cost of Methods to Test Ebola-Relevant Chlorine Solutions.

    PubMed

    Wells, Emma; Wolfe, Marlene K; Murray, Anna; Lantagne, Daniele

    2016-01-01

    To prevent transmission in Ebola Virus Disease (EVD) outbreaks, it is recommended to disinfect living things (hands and people) with 0.05% chlorine solution and non-living things (surfaces, personal protective equipment, dead bodies) with 0.5% chlorine solution. In the current West African EVD outbreak, these solutions (manufactured from calcium hypochlorite (HTH), sodium dichloroisocyanurate (NaDCC), and sodium hypochlorite (NaOCl)) have been widely used in both Ebola Treatment Unit and community settings. To ensure solution quality, testing is necessary, however test method appropriateness for these Ebola-relevant concentrations has not previously been evaluated. We identified fourteen commercially-available methods to test Ebola-relevant chlorine solution concentrations, including two titration methods, four DPD dilution methods, and six test strips. We assessed these methods by: 1) determining accuracy and precision by measuring in quintuplicate five different 0.05% and 0.5% chlorine solutions manufactured from NaDCC, HTH, and NaOCl; 2) conducting volunteer testing to assess ease-of-use; and, 3) determining costs. Accuracy was greatest in titration methods (reference-12.4% error compared to reference method), then DPD dilution methods (2.4-19% error), then test strips (5.2-48% error); precision followed this same trend. Two methods had an accuracy of <10% error across all five chlorine solutions with good precision: Hach digital titration for 0.05% and 0.5% solutions (recommended for contexts with trained personnel and financial resources), and Serim test strips for 0.05% solutions (recommended for contexts where rapid, inexpensive, and low-training burden testing is needed). Measurement error from test methods not including pH adjustment varied significantly across the five chlorine solutions, which had pH values 5-11. Volunteers found test strip easiest and titration hardest; costs per 100 tests were $14-37 for test strips and $33-609 for titration. Given the

  19. Accuracy, Precision, Ease-Of-Use, and Cost of Methods to Test Ebola-Relevant Chlorine Solutions.

    PubMed

    Wells, Emma; Wolfe, Marlene K; Murray, Anna; Lantagne, Daniele

    2016-01-01

    To prevent transmission in Ebola Virus Disease (EVD) outbreaks, it is recommended to disinfect living things (hands and people) with 0.05% chlorine solution and non-living things (surfaces, personal protective equipment, dead bodies) with 0.5% chlorine solution. In the current West African EVD outbreak, these solutions (manufactured from calcium hypochlorite (HTH), sodium dichloroisocyanurate (NaDCC), and sodium hypochlorite (NaOCl)) have been widely used in both Ebola Treatment Unit and community settings. To ensure solution quality, testing is necessary, however test method appropriateness for these Ebola-relevant concentrations has not previously been evaluated. We identified fourteen commercially-available methods to test Ebola-relevant chlorine solution concentrations, including two titration methods, four DPD dilution methods, and six test strips. We assessed these methods by: 1) determining accuracy and precision by measuring in quintuplicate five different 0.05% and 0.5% chlorine solutions manufactured from NaDCC, HTH, and NaOCl; 2) conducting volunteer testing to assess ease-of-use; and, 3) determining costs. Accuracy was greatest in titration methods (reference-12.4% error compared to reference method), then DPD dilution methods (2.4-19% error), then test strips (5.2-48% error); precision followed this same trend. Two methods had an accuracy of <10% error across all five chlorine solutions with good precision: Hach digital titration for 0.05% and 0.5% solutions (recommended for contexts with trained personnel and financial resources), and Serim test strips for 0.05% solutions (recommended for contexts where rapid, inexpensive, and low-training burden testing is needed). Measurement error from test methods not including pH adjustment varied significantly across the five chlorine solutions, which had pH values 5-11. Volunteers found test strip easiest and titration hardest; costs per 100 tests were $14-37 for test strips and $33-609 for titration. Given the

  20. Accuracy, Precision, Ease-Of-Use, and Cost of Methods to Test Ebola-Relevant Chlorine Solutions

    PubMed Central

    Wells, Emma; Wolfe, Marlene K.; Murray, Anna; Lantagne, Daniele

    2016-01-01

    To prevent transmission in Ebola Virus Disease (EVD) outbreaks, it is recommended to disinfect living things (hands and people) with 0.05% chlorine solution and non-living things (surfaces, personal protective equipment, dead bodies) with 0.5% chlorine solution. In the current West African EVD outbreak, these solutions (manufactured from calcium hypochlorite (HTH), sodium dichloroisocyanurate (NaDCC), and sodium hypochlorite (NaOCl)) have been widely used in both Ebola Treatment Unit and community settings. To ensure solution quality, testing is necessary, however test method appropriateness for these Ebola-relevant concentrations has not previously been evaluated. We identified fourteen commercially-available methods to test Ebola-relevant chlorine solution concentrations, including two titration methods, four DPD dilution methods, and six test strips. We assessed these methods by: 1) determining accuracy and precision by measuring in quintuplicate five different 0.05% and 0.5% chlorine solutions manufactured from NaDCC, HTH, and NaOCl; 2) conducting volunteer testing to assess ease-of-use; and, 3) determining costs. Accuracy was greatest in titration methods (reference-12.4% error compared to reference method), then DPD dilution methods (2.4–19% error), then test strips (5.2–48% error); precision followed this same trend. Two methods had an accuracy of <10% error across all five chlorine solutions with good precision: Hach digital titration for 0.05% and 0.5% solutions (recommended for contexts with trained personnel and financial resources), and Serim test strips for 0.05% solutions (recommended for contexts where rapid, inexpensive, and low-training burden testing is needed). Measurement error from test methods not including pH adjustment varied significantly across the five chlorine solutions, which had pH values 5–11. Volunteers found test strip easiest and titration hardest; costs per 100 tests were $14–37 for test strips and $33–609 for titration

  1. An analytical model for solute transport in an infiltration tracer test in soil with a shallow groundwater table

    NASA Astrophysics Data System (ADS)

    Liang, Ching-Ping; Hsu, Shao-Yiu; Chen, Jui-Sheng

    2016-09-01

    It is recommended that an in-situ infiltration tracer test is considered for simultaneously determining the longitudinal and transverse dispersion coefficients in soil. Analytical solutions have been derived for two-dimensional advective-dispersive transport in a radial geometry in the literature which can be used for interpreting the result of such a tracer test. However, these solutions were developed for a transport domain with an unbounded-radial extent and an infinite thickness of vadose zone which might not be realistically manifested in the actual solute transport during a field infiltration tracer test. Especially, the assumption of infinite thickness of vadose zone should be invalid for infiltration tracer tests conducted in soil with a shallow groundwater table. This paper describes an analytical model for interpreting the results of an infiltration tracer test based on improving the transport domain with a bounded-radial extent and a finite thickness of vadose zone. The analytical model is obtained with the successive application of appropriate integral transforms and their corresponding inverse transforms. A comparison of the newly derived analytical solution against the previous analytical solutions in which two distinct sets of radial extent and thickness of vadose zone are considered is conducted to determine the influence of the radial and exit boundary conditions on the solute transport. The results shows that both the radial and exit boundary conditions substantially affect the trailing segment of the breakthrough curves for a soil medium with large dispersion coefficients. Previous solutions derived for a transport domain with an unbounded-radial and an infinite thickness of vadose zone boundary conditions give lower concentration predictions compared with the proposed solution at late times. Moreover, the differences between two solutions are amplified when the observation positions are near the groundwater table. In addition, we compare our

  2. Testing Spirotetramat as an Alternative Solution to Abamectin for Cacopsylla pyri (Hemiptera: Psyllidae) Control: Laboratory and Field Tests.

    PubMed

    Civolani, Stefano; Boselli, Mauro; Butturini, Alda; Chicca, Milvia; Cassanelli, Stefano; Tommasini, Maria Grazia; Aschonitis, Vassilis; Fano, Elisa Anna

    2015-12-01

    Aim of the study was to investigate the performance of the new insecticide "spirotetramat" as an alternative solution of "abamectin" for the control of Cacopsylla pyri L. (Hemiptera: Psyllidae) in the context of an IPM program in European pear, Pyrus communis L.. Laboratory bioassays for the estimation of LC50 and LC90 of both insecticides were performed using four populations collected in Emilia-Romagna (Italy) orchards where different pest management strategies were used (organic, integrated, and conventional). The same populations were also analyzed for the main insecticide detoxifying activities in nymphs by spectrofluorimetric in vitro assays. The performance of the two insecticides was also tested on field on one population under integrated pest management conditions. The laboratory experiments showed that the LC90 of spirotetramat were lower than the highest field concentration allowed in Europe (172.80 mg AI liter(-1)) giving reassurance about the efficacy of the product. Concerning the abamectin, the laboratory bioassays did not show strong indications of resistance development of C. pyri populations of Emilia-Romagna. A similarity in enzyme detoxifying activity was observed in both insecticides indicating a general absence of a significant insecticide resistance. The field trial showed a high efficacy (>90 %) of spirotetramat on C. pyri already after 15 d from application, and it was significantly higher from abamectin. Overall, spirotetramat is one more choice for C. pyri control, as well as abamectin in order to minimize the risks of occurrence of insecticide resistance. PMID:26470374

  3. Solution calorimetry as an alternative approach for dissolution testing of nanosuspensions.

    PubMed

    Kayaert, P; Li, B; Jimidar, I; Rombaut, P; Ahssini, F; Van den Mooter, G

    2010-11-01

    The formulation of poorly soluble drugs as nanocrystals/nanosuspensions has rapidly evolved during the past decade into a mature drug-delivery strategy. The major characteristic of these systems is the high drug dissolution rate, enabling bioavailability enhancement after oral administration. It is therefore of great importance to have access to analytical methodology that is able to accurately monitor the extreme fast dissolution process of such formulations. The aim of the present study was to evaluate solution calorimetry as a novel approach to measure the dissolution rate of nanosuspensions by recording the temperature change in the dissolution vessel during the dissolution process of the nanocrystals. The applicability was tested on different nanosuspensions made up of three model drugs: naproxen, cinnarizine and an investigational API, i.e. compound A. The dissolution process of all nanosuspensions investigated was completed within less than 1 min. During this period, sufficient data points were collected to transform temperature offset data to cumulative heat of solution pointing to the potential of this technique. However, of significant concern is the fact that this technique measures the total heat produced or consumed by all processes that occur during the dissolution, e.g. the heat of mixing when the nanosuspension comes in contact with the dissolution medium. Erroneous conclusions will result if phenomena other than dissolution are not accounted for. PMID:20887787

  4. Technical note: Analytical drawdown solution for steady-state pumping tests in two-dimensional isotropic heterogeneous aquifers

    NASA Astrophysics Data System (ADS)

    Zech, Alraune; Attinger, Sabine

    2016-05-01

    A new method is presented which allows interpreting steady-state pumping tests in heterogeneous isotropic transmissivity fields. In contrast to mean uniform flow, pumping test drawdowns in heterogeneous media cannot be described by a single effective or equivalent value of hydraulic transmissivity. An effective description of transmissivity is required, being a function of the radial distance to the well and including the parameters of log-transmissivity: mean, variance, and correlation length. Such a model is provided by the upscaling procedure radial coarse graining, which describes the transition of near-well to far-field transmissivity effectively. Based on this approach, an analytical solution for a steady-state pumping test drawdown is deduced. The so-called effective well flow solution is derived for two cases: the ensemble mean of pumping tests and the drawdown within an individual heterogeneous transmissivity field. The analytical form of the solution allows inversely estimating the parameters of aquifer heterogeneity. For comparison with the effective well flow solution, virtual pumping tests are performed and analysed for both cases, the ensemble mean drawdown and pumping tests at individual transmissivity fields. Interpretation of ensemble mean drawdowns showed proof of the upscaling method. The effective well flow solution reproduces the drawdown for two-dimensional pumping tests in heterogeneous media in contrast to Thiem's solution for homogeneous media. Multiple pumping tests conducted at different locations within an individual transmissivity field are analysed, making use of the effective well flow solution to show that all statistical parameters of aquifer heterogeneity can be inferred under field conditions. Thus, the presented method is a promising tool with which to estimate parameters of aquifer heterogeneity, in particular variance and horizontal correlation length of log-transmissivity fields from steady-state pumping test measurements.

  5. Analytical solutions for analysing pumping tests in a sub-vertical and anisotropic fault zone draining shallow aquifers

    NASA Astrophysics Data System (ADS)

    Dewandel, B.; Aunay, B.; Maréchal, J. C.; Roques, C.; Bour, O.; Mougin, B.; Aquilina, L.

    2014-02-01

    We present new analytical solutions for examining the influence, during a pumping test in a well, of an infinite linear and anisotropic strip-aquifer that drains shallow aquifers of different diffusivity and thickness. The whole system is confined and the aquifer geometry can be represented by a 'T', an aquifer geometry resembling a sub-vertical fault or a sub-vertical vein cross-cutting shallower aquifers. The proposed solutions are based upon an unconventional application of well-image theory, without limitation of the diffusivity contrast between the three domains. Solutions for drawdown were developed for the three domains, i.e. the strip-aquifer and the two shallow compartments, and flow signatures are discussed in detail and compared to numerical modelling. The proposed solutions are not shown to be exact solutions to the appropriate partial differential equation, but very good and useful approximations. The solutions were applied to a 63-day pumping test in a steep fault zone in crystalline aquifer rock of Brittany, France. After that, the flow contributions of the fault zone and of the shallow aquifers deduced from groundwater dating were compared to analytical solutions. The solutions and theoretical type-curve examples can help in understanding flow processes from tests conducted in settings that are similar to such a conceptual model.

  6. Mixing of process heels, process solutions, and recycle streams: Results of the small-scale radioactive tests

    SciTech Connect

    GJ Lumetta; JP Bramson; OT Farmer III; LR Greenwood; FV Hoopes; MA Mann; MJ Steele; RT Steele; RG Swoboda; MW Urie

    2000-05-17

    Various recycle streams will be combined with the low-activity waste (LAW) or the high-level waste (HLW) feed solutions during the processing of the Hanford tank wastes by BNFL, Inc. In addition, the LAW and HLW feed solutions will also be mixed with heels present in the processing equipment. This report describes the results of a test conducted by Battelle to assess the effects of mixing specific process streams. Observations were made regarding adverse reactions (mainly precipitation) and effects on the Tc oxidation state (as indicated by K{sub d} measurements with SuperLig{reg_sign} 639). The work was conducted according to test plan BNFL-TP-29953-023, Rev. 0, Small Scale Mixing of Process Heels, Solutions, and Recycle Streams. The test went according to plan, with only minor deviations from the test plan. The deviations from the test plan are discussed in the experimental section.

  7. Decontamination testing of radioactive-contaminated stainless steel coupons using a Ce(IV) solution

    SciTech Connect

    Bray, L.A.; Elmore, M.R.; Carson, K.J.; Elovich, R.J.; Richardson, G.M.; Anderson, L.D.

    1992-08-01

    The current Hanford Waste Vitrification Plant (HWVP) reference process for canister decontamination describes an air-atomized frit/water slurry blaster developed for the Defense Waste Processing Facility (DWPF). Westinghouse Hanford Company (WHC) identified incentives to evaluate potential HWVP cost savings from adapting the Ce(IV)/HNO{sub 3} canister decontamination approach being developed for the West Valley Demonstration Project (WVDP) at West Valley, New York. Development studies were recommended by WHC to address issues related to further assessment of the adaptation of the Ce(IV)/HN0{sub 3} decontamination system to HWVP, and to resolve a number of technical uncertainties. Laboratory studies at the Pacific Northwest Laboratory (PNL) were performed to provide further data to support the selection of an effective flowsheet for the Ce(IV)/HN0{sub 3} decontamination of HWVP stainless steel (SS) vitrification canisters. The results reconfirmed the predictability of this unique chemical milling and decontamination process. The decontamination process developed in the laboratory will be scaled up by a factor of 5,000:1 and tested in FY 1992 by the WVDP at West Valley using uncontaminated full-scale glass-filled canisters. An engineering uncertainty remains to be resolved concerning the removal of a layer of loosely held oxide, some of which may remain on the SS surface after removal of the canister from the decontamination solution. In this laboratory study, low-pressure water from a standard laboratory wash bottle was used to rinse the surfaces of the test coupons. Ultrasonic agitation has been a suggested alternative or addition to spray nozzles for rinsing but has not been selected for the initial series of full-scale tests.

  8. Experimental Testing and Modeling Analysis of Solute Mixing at Water Distribution Pipe Junctions

    EPA Science Inventory

    Flow dynamics at a pipe junction controls particle trajectories, solute mixing and concentrations in downstream pipes. Here we have categorized pipe junctions into five hydraulic types, for which flow distribution factors and analytical equations for describing the solute mixing ...

  9. Tests of the Grobner Basis Solution for Lightning Ground Flash Fraction Retrieval

    NASA Technical Reports Server (NTRS)

    Koshak, William; Solakiewicz, Richard; Attele, Rohan

    2011-01-01

    Satellite lightning imagers such as the NASA Tropical Rainfall Measuring Mission Lightning Imaging Sensor (TRMM/LIS) and the future GOES-R Geostationary Lightning Mapper (GLM) are designed to detect total lightning (ground flashes + cloud flashes). However, there is a desire to discriminate ground flashes from cloud flashes from the vantage point of space since this would enhance the overall information content of the satellite lightning data and likely improve its operational and scientific applications (e.g., in severe weather warning, lightning nitrogen oxides studies, and global electric circuit analyses). A Bayesian inversion method was previously introduced for retrieving the fraction of ground flashes in a set of flashes observed from a satellite lightning imager. The method employed a constrained mixed exponential distribution model to describe the lightning optical measurements. To obtain the optimum model parameters (one of which is the ground flash fraction), a scalar function was minimized by a numerical method. In order to improve this optimization, a Grobner basis solution was introduced to obtain analytic representations of the model parameters that serve as a refined initialization scheme to the numerical optimization. In this study, we test the efficacy of the Grobner basis initialization using actual lightning imager measurements and ground flash truth derived from the national lightning network.

  10. Tested Demonstrations. Color, Solubility, and Complex Ion Equilibria of Nickel (II) Species in Aqueous Solution.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.; And Others

    1980-01-01

    Presents three different procedures in which reagents are added in a specified order to a large beaker containing an aqueous solution of nickel sulfate. Complex ions of nickel (II) are prepared by using aqueous solutions of ammonia, ethylenediamine, dimethylglyoxime, and cyanide ion. (CS)

  11. Test Review: Advanced Clinical Solutions for WAIS-IV and WMS-IV

    ERIC Educational Resources Information Center

    Chu, Yiting; Lai, Mark H. C.; Xu, Yining; Zhou, Yuanyuan

    2012-01-01

    The authors review the "Advanced Clinical Solutions for WAIS-IV and WMS-IV". The "Advanced Clinical Solutions (ACS) for the Wechsler Adult Intelligence Scale-Fourth Edition" (WAIS-IV; Wechsler, 2008) and the "Wechsler Memory Scale-Fourth Edition" (WMS-IV; Wechsler, 2009) was published by Pearson in 2009. It is a clinical tool for extending the…

  12. Magneto-frictional Modeling of Coronal Nonlinear Force-free Fields. I. Testing with Analytic Solutions

    NASA Astrophysics Data System (ADS)

    Guo, Y.; Xia, C.; Keppens, R.; Valori, G.

    2016-09-01

    We report our implementation of the magneto-frictional method in the Message Passing Interface Adaptive Mesh Refinement Versatile Advection Code (MPI-AMRVAC). The method aims at applications where local adaptive mesh refinement (AMR) is essential to make follow-up dynamical modeling affordable. We quantify its performance in both domain-decomposed uniform grids and block-adaptive AMR computations, using all frequently employed force-free, divergence-free, and other vector comparison metrics. As test cases, we revisit the semi-analytic solution of Low and Lou in both Cartesian and spherical geometries, along with the topologically challenging Titov-Démoulin model. We compare different combinations of spatial and temporal discretizations, and find that the fourth-order central difference with a local Lax-Friedrichs dissipation term in a single-step marching scheme is an optimal combination. The initial condition is provided by the potential field, which is the potential field source surface model in spherical geometry. Various boundary conditions are adopted, ranging from fully prescribed cases where all boundaries are assigned with the semi-analytic models, to solar-like cases where only the magnetic field at the bottom is known. Our results demonstrate that all the metrics compare favorably to previous works in both Cartesian and spherical coordinates. Cases with several AMR levels perform in accordance with their effective resolutions. The magneto-frictional method in MPI-AMRVAC allows us to model a region of interest with high spatial resolution and large field of view simultaneously, as required by observation-constrained extrapolations using vector data provided with modern instruments. The applications of the magneto-frictional method to observations are shown in an accompanying paper.

  13. Magneto-frictional Modeling of Coronal Nonlinear Force-free Fields. I. Testing with Analytic Solutions

    NASA Astrophysics Data System (ADS)

    Guo, Y.; Xia, C.; Keppens, R.; Valori, G.

    2016-09-01

    We report our implementation of the magneto-frictional method in the Message Passing Interface Adaptive Mesh Refinement Versatile Advection Code (MPI-AMRVAC). The method aims at applications where local adaptive mesh refinement (AMR) is essential to make follow-up dynamical modeling affordable. We quantify its performance in both domain-decomposed uniform grids and block-adaptive AMR computations, using all frequently employed force-free, divergence-free, and other vector comparison metrics. As test cases, we revisit the semi-analytic solution of Low and Lou in both Cartesian and spherical geometries, along with the topologically challenging Titov–Démoulin model. We compare different combinations of spatial and temporal discretizations, and find that the fourth-order central difference with a local Lax–Friedrichs dissipation term in a single-step marching scheme is an optimal combination. The initial condition is provided by the potential field, which is the potential field source surface model in spherical geometry. Various boundary conditions are adopted, ranging from fully prescribed cases where all boundaries are assigned with the semi-analytic models, to solar-like cases where only the magnetic field at the bottom is known. Our results demonstrate that all the metrics compare favorably to previous works in both Cartesian and spherical coordinates. Cases with several AMR levels perform in accordance with their effective resolutions. The magneto-frictional method in MPI-AMRVAC allows us to model a region of interest with high spatial resolution and large field of view simultaneously, as required by observation-constrained extrapolations using vector data provided with modern instruments. The applications of the magneto-frictional method to observations are shown in an accompanying paper.

  14. Angular spectral framework to test full corrections of paraxial solutions: erratum.

    PubMed

    Mahillo-Isla, R; González-Morales, M J

    2016-09-01

    In our previous article [J. Opt. Soc. Am. A32, 1236 (2015)JOAOD60740-323210.1364/JOSAA.32.001236] there is an issue concerning the comparison of plane wave spectrum solutions of paraxial and Helmholtz equations. We compared the angular plane wave spectrum of Helmholtz solutions with the plane wave spectrum of the paraxial solutions in terms of normalized projections of paraxial wave vectors. We show that the proper comparison of plane wave spectra must be done in terms of angles. The results presented in our previous work are corrected accordingly. The most important change is that Wünsche's T2 operator leads to a valid method.

  15. Testing of stripping columns for the removal of benzene from aqueous radioactive salt solution

    SciTech Connect

    Georgeton, G.K.; Taylor, G.A.; Gaughan, T.P.

    1995-06-27

    Radioactive high level wastes (HLW) generated from production of special nuclear materials at the Savannah River Site (SRS) are held in interim storage in 51 underground, million gallon tanks. Radioactive cesium ({sup 137}Cs) is segregated by evaporation of aqueous waste solution for interim storage in a salt matrix comprised of Na and K salts or in concentrated salt solution. The saltcake will be dissolved and {sup 137}Cs will be separated from the nonradioactive salts in solution in the In-Tank Precipitation (ITP) Process. The cesium will be combined with other radioactive species and glass formers to be melted and poured into stainless steel canisters in the Defense Waste Processing Facility (DWPF). The salt solution remaining after decontamination in the ITP process will be incorporated into grout for disposal at the site`s Saltstone facility. In the ITP facility, sodium tetraphenylborate (STPB) will be added to precipitate the cesium. Potassium in the waste solution also reacts with STPB and precipitates. Due to radiolytic and chemical degradation of the tetraphenylborate (TPB) precipitate, benzene is generated. The benzene dissolves into the decontaminated salt solution (DSS) and into water (WW) used to {open_quotes}wash{close_quotes} the precipitate to lower the soluble salt content of the slurry. Safety and processing requirements for disposal of the DSS and for temporary storage of the WW dictate that the benzene concentration be reduced.

  16. Solutions for Some Technical Problems in Domain-Referenced Mastery Testing. Final Report.

    ERIC Educational Resources Information Center

    Huynh, Huynh; Saunders, Joseph C.

    A basic technical framework is provided for the design and use of mastery tests. The Mastery Testing Project (MTP) prepared this framework using advanced mathematics supplemented with computer simulation based on real test data collected by the South Carolina Statewide Testing Program. The MTP focused on basic technical issues encountered in using…

  17. Sensitivity of a hyperosmolar or "low"-osmolar test solution for sugar absorption in recognizing small intestinal mucosal damage in coeliac disease.

    PubMed

    Uil, J J; van Elburg, R M; Janssens, P M; Mulder, C J; Heymans, H S

    2000-04-01

    Reliability of differential sugar absorption tests is hampered by a lack of standardization of the content and osmolarity of the test solutions. We evaluated the effect of osmolarity of the test solution of the sugar absorption test on the 5 hour urine excretion of orally administered lactulose and mannitol. A group of 28 controls and 14 coeliacs, with villous atrophy grade II to IV, ingested a hyperosmolar sugar absorption test solution and a "low"-osmolar solution, respectively. After an overnight fast, each subject ingested hyperosmolar sugar absorption test solution (2 g mannitol, 5 g lactulose and 40 g sucrose/100 ml (around 1,560 mmol/l)). After two days, this procedure was repeated with low-osmolar solution (2 g mannitol and 5 g lactulose/100 ml (around 375 mmol/l). The influence of the sequence of the tests on the results had previously been excluded. All urine from the 5 h-period following ingestion of the test solution was collected. To calculate the low-osmolar solution ratio, samples were analysed for lactulose and mannitol concentrations by gas chromatography The sensitivity of hyperosmolar SAT solution and low-osmolar solution for the detection of mucosal abnormalities in coeliacs was 64% and 43%, respectively. In conclusion, a hyperosmolar solution discriminates better between normal and damaged mucosa of the small bowel such as villous atrophy due to a relative increase in permeability for lactulose. PMID:10975768

  18. K Basin Sludge Conditioning Process Testing Partitioning of PCBs in Dissolver Solution After Neutralization/Precipitation (Caustic Adjustment)

    SciTech Connect

    Schmidt, A.J.; Thornton, B.M.; Hoppe, E.W.; Mong, G.M.; Silvers, K.L.; Slate, S.O.

    1999-01-04

    The purpose of the work described in this report was to gain a better understanding of how PCB congeners present in a simulated K Basin sludge dissolver solution will partition upon neutralization and precipitation (i.e., caustic adjustment). In a previous study (Mong et al. 1998),the entire series of sludge conditioning steps (acid dissolution, filtration, and caustic adjustment) were examined during integrated testing. In the work described here, the caustic adjustment step was isolated to examine the fate of PCBs in more detail within this processing step. For this testing, solutions of dissolver simulant (containing no solids) with a known initial concentration of PCB congeners were neutralized with caustic to generate a clarified supernatant and a settled sludge phase. PCBs were quantified in each phase (including the PCBs associated with the test vessel rinsates), and material balance information was collected.

  19. Pitting Corrosion Characterization of Wrought Stellite Alloys in Green Death Solution with Immersion Test and Extreme Value Analysis Model

    NASA Astrophysics Data System (ADS)

    Zhang, X. Z.; Liu, R.; Chen, K. Y.; Yao, M. X.

    2014-05-01

    This article presents a study of the corrosion behavior of two wrought Stellite alloys, Stellite 6B, and Stellite 6K, in Green Death solution, utilizing the extreme value analysis (EVA) model, which is a statistics tool developed based on the Gumbel distribution. Green Death solution a typical oxidized testing solution used in industry for assessing the corrosion resistance of materials. The data of maximum pit depths are obtained from the immersion tests on these alloys for various exposure periods. The top ten maximum pit depths in each specimen surface after the immersion test are measured using a surface texture and contour measuring instrument. These data are the input parameters of the EVA model and the outcomes of the model are the extreme values (minimum thickness) required for the alloys under a given service condition. It is shown that Stellite 6K, which contains higher carbon content but smaller-size carbides, exhibits better corrosion resistance in regard to the extreme value. The results and mechanisms of Stellite 6B and Stellite 6K in Green Death solution corrosion are discussed.

  20. Convergent radial dispersion: a Laplace transform solution for aquifer tracer testing

    USGS Publications Warehouse

    Moench, A.F.

    1989-01-01

    A Laplace transform solution was obtained for the injection of a tracer in a well situated in a homogeneous aquifer where steady, horizontal, radially convergent flow has been established due to pumping at a second well. The standard advection-dispersion equation for mass transfer was used as the controlling equation. For boundary conditions, mass balances that account for mixing of the tracer with the fluid residing in the injection and pumping wells were used. The derived solution, which can be adapted for either resident or flux-averaged concentration, is of practical use only for the pumped well. This problem is of interest because it is easily applied to field determination of aquifer dispersivity and effective porosity. Breakthrough curves were obtained by numerical inversion of the Laplace transform solution. -from Author

  1. Multicomponent leach tests in Standard Canadian Shield Saline Solution on glasses containing simulated nuclear waste

    SciTech Connect

    Heimann, R.B.; Wood, D.D.; Hamon, R.F.

    1984-01-01

    Leaching experiments on borosilicate glass frit and simulated nuclear waste glasses were performed as a preliminary to leaching experiments on glasses incorporating radioactive waste. The experimental design included (1) simulated waste glass, (2) ASTM Grade-2 titanium container material, (3) clay buffer material, (4) Standard Canadian Shield Saline Solution, and (5) granitic rock. Cumulative fractions of release for boron were determined, as well as the solution concentrations of silicon, iron, strontium and cesium. The leach rates for boron after 28 d were approximately 5 x 10/sup -6/ kg x m/sup -2/ x s/sup -1/ in Hastelloy vessels. There is an apparently strong relationship between the clay/groundwater ratio, the concentration of iron in the solution, and the concentrations of silicon, strontium, and cesium.

  2. Angular spectral framework to test full corrections of paraxial solutions: erratum.

    PubMed

    Mahillo-Isla, R; González-Morales, M J

    2016-09-01

    In our previous article [J. Opt. Soc. Am. A32, 1236 (2015)JOAOD60740-323210.1364/JOSAA.32.001236] there is an issue concerning the comparison of plane wave spectrum solutions of paraxial and Helmholtz equations. We compared the angular plane wave spectrum of Helmholtz solutions with the plane wave spectrum of the paraxial solutions in terms of normalized projections of paraxial wave vectors. We show that the proper comparison of plane wave spectra must be done in terms of angles. The results presented in our previous work are corrected accordingly. The most important change is that Wünsche's T2 operator leads to a valid method. PMID:27607494

  3. Confirming the Factor Structure of the Cognitive Test Anxiety Scale: Comparing the Utility of Three Solutions

    ERIC Educational Resources Information Center

    Cassady, Jerrell C.; Finch, W. Holmes

    2014-01-01

    This study validated the factor structure of a popular assessment of learner's cognitive test anxiety. Following recent findings in a study with Argentinean students' use of the Spanish version of the Cognitive Test Anxiety Scale (CTAS), this study tested the factor structure using data from 742 students who completed the original…

  4. Design Solutions: Supplement to the Curriculum Guide for Art in the Secondary Schools. Field Test.

    ERIC Educational Resources Information Center

    Chicago Board of Education, IL.

    Intended to clarify the elements and principles of design as stated in the "Curriculum Guide for Art in the Secondary Schools," this illustrated supplement presents 15 design units with step-by-step instructions for clarifying design problems and providing solutions. Each unit is presented in three stages, each of which is a complete lesson in…

  5. Measurement of Uncertainty for Aqueous Ethanol Wet-Bath Simulator Solutions Used with Evidential Breath Testing Instruments.

    PubMed

    Hwang, Rong-Jen; Beltran, Jada; Rogers, Craig; Barlow, Jeremy; Razatos, Gerasimos

    2016-09-01

    Aqueous ethanol wet-bath simulator solutions are used to perform calibration adjustments, calibration checks, proficiency testing, and inspection of breath alcohol instruments. The Toxicology Bureau of the New Mexico Department of Health has conducted a study to estimate a measurement of uncertainty for the preparation and testing of these wet-bath simulator solutions. The measurand is identified as the mass concentration of ethanol (g/100 mL) determined through dual capillary column headspace gas chromatography with flame ionization detector analysis. Three groups were used in the estimation of the aqueous ethanol wet-bath simulator solutions uncertainty: GC calibration adjustment, GC analytical, and certified reference material. The standard uncertainties for these uncertainty sources were combined using the method of root-sum-squares to give uc = 0.8598%. The combined standard uncertainty was expanded to U = 1.7% to reflect a confidence level of 95% using a coverage factor of 2. This estimation applies to all aqueous ethanol wet-bath simulator solution concentrations produced by this laboratory.

  6. Precipitation of calcium oxalates from high ionic strength solutions IV. Testing of kinetic models*1

    NASA Astrophysics Data System (ADS)

    Skrtic, D.; Markovic, M.; Foredi-Milhofer, H.

    1986-12-01

    The following parameters characterizing the kinetics of precipitation from unseeded solutions are defined: the induction period ( ti), the maximum precipitation rate ( Rmax), the number of particles per cm 3 ( N), the order ( p) and rate constants ( Kα, Ks) of the crystal growth process, the critical time ( taggr∗), the critical supersaturation ( Saggr∗) and the rate constant of aggregation ( kj) as well as the relative changes in the surface area ( ΔP/ P) and the degree of the reaction (Δα/α) due to aggregation. The information which these parameters yield on nucleation, crystal growth and aggregation is evaluated. The model is applied to the precipitation of calcium oxalate trihydrate (COT) from 0.3 molar sodium chloride solutions, with and without the presence of tryptophan or ornithine. At the given concentrations both aminoacids inhibit crystal growth and change the mode of aggregation of COT.

  7. A comparison of solute migration in a test granulation dried by fluidization and other methods.

    PubMed

    Travers, D N

    1975-07-01

    The intragranular migration of sodium chloride in granules made by the wet massing of heavy kaolin B.P. with salt solution has been studied in batches dried by fluidization and a vacuum tumbling method. The larger granules from the fluidized batch exhibited considerable intragranular variation with the outer crust containing over twice the average salt concentration. Solute loss from this layer by abrasion on prolonged fluidization was slight but the dust eluted from the dryer had a salt content above average. Analysis of sieved fractions of the dust showed that this enrichment was concentrated in the fine material passing a 53 mum mesh. The vacuum dried granules had less migration and were less resistant to crushing than those dried by fluidization. The dust produced had a salt content only slightly greater than the average composition and the overall solute content of the sized fractions were all close to this average. The same system was used to study intergranular migration in a fixed bed when the granules were dried by infrared radiation, by microwave radiation, by convection from air and in a vacuum. The greatest migration occurred in samples dried by infrared radiation and the maximum solute concentration was near the middle of the bed. The air dried granules had less migration and the maximum concentration was in the surface layer. The granules dried in a vacuum and by microwave radiation were fairly uniform in composition throughout the bed. The above results are explained on the basis of the capillary theory of drying together with the modifying influence of the drying method on the probable heat and mass transfer rates. PMID:239157

  8. ECLSS Sustaining Compatibility Testing on Urine Processor Assembly Nonmetallic Materials for Reformulation of Pretreated Urine Solution

    NASA Technical Reports Server (NTRS)

    Wingard, C. D.

    2015-01-01

    On International Space Station (ISS), the Urine Processor Assembly (UPA) converts human urine and flush water into potable water. The urine is acid-pretreated primarily to control microbial growth. In recent years, the sulfuric acid (H2SO4) pretreatment was believed to be largely responsible for producing salt crystals capable of plugging filters in UPA components and significantly reducing the percentage of water recovery from urine. In 2012, ISS management decided to change the acid pretreatment for urine from sulfuric to phosphoric with the goal of eliminating or minimizing formation of salt crystals. In 2013-2014, as part of the qualification of the phosphoric acid (H3PO4) formulation, samples of 12 nonmetallic materials used in UPA components were immersed for up to one year in pretreated urine and brine solutions made with the new H3PO4 formulation. Dynamic mechanical analysis (DMA) was used to measure modulus (stiffness) of the immersed samples compared to virgin control samples. Such compatibility data obtained by DMA for the H3PO4-based solutions were compared to DMA data obtained for the H2SO4-based solutions in 2002-2003.

  9. Geophysical monitoring of solute transport in dual-domain environments through laboratory experiments, field-scale solute tracer tests, and numerical simulation

    NASA Astrophysics Data System (ADS)

    Swanson, Ryan David

    The advection-dispersion equation (ADE) fails to describe non-Fickian solute transport breakthrough curves (BTCs) in saturated porous media in both laboratory and field experiments, necessitating the use of other models. The dual-domain mass transfer (DDMT) model partitions the total porosity into mobile and less-mobile domains with an exchange of mass between the two domains, and this model can reproduce better fits to BTCs in many systems than ADE-based models. However, direct experimental estimation of DDMT model parameters remains elusive and model parameters are often calculated a posteriori by an optimization procedure. Here, we investigate the use of geophysical tools (direct-current resistivity, nuclear magnetic resonance, and complex conductivity) to estimate these model parameters directly. We use two different samples of the zeolite clinoptilolite, a material shown to demonstrate solute mass transfer due to a significant internal porosity, and provide the first evidence that direct-current electrical methods can track solute movement into and out of a less-mobile pore space in controlled laboratory experiments. We quantify the effects of assuming single-rate DDMT for multirate mass transfer systems. We analyze pore structures using material characterization methods (mercury porosimetry, scanning electron microscopy, and X-ray computer tomography), and compare these observations to geophysical measurements. Nuclear magnetic resonance in conjunction with direct-current resistivity measurements can constrain mobile and less-mobile porosities, but complex conductivity may have little value in relation to mass transfer despite the hypothesis that mass transfer and complex conductivity lengths scales are related. Finally, we conduct a geoelectrical monitored tracer test at the Macrodispersion Experiment (MADE) site in Columbus, MS. We relate hydraulic and electrical conductivity measurements to generate a 3D hydraulic conductivity field, and compare to

  10. New error calibration tests for gravity models using subset solutions and independent data - Applied to GEM-T3

    NASA Technical Reports Server (NTRS)

    Lerch, F. J.; Nerem, R. S.; Chinn, D. S.; Chan, J. C.; Patel, G. B.; Klosko, S. M.

    1993-01-01

    A new method has been developed to provide a direct test of the error calibrations of gravity models based on actual satellite observations. The basic approach projects the error estimates of the gravity model parameters onto satellite observations, and the results of these projections are then compared with data residual computed from the orbital fits. To allow specific testing of the gravity error calibrations, subset solutions are computed based on the data set and data weighting of the gravity model. The approach is demonstrated using GEM-T3 to show that the gravity error estimates are well calibrated and that reliable predictions of orbit accuracies can be achieved for independent orbits.

  11. The Major Field Test in Business: A Solution to the Problem of Assurance of Learning Assessment?

    ERIC Educational Resources Information Center

    Green, Jeffrey J.; Stone, Courtenay Clifford; Zegeye, Abera

    2014-01-01

    Colleges and universities are being asked by numerous sources to provide assurance of learning assessments of their students and programs. Colleges of business have responded by using a plethora of assessment tools, including the Major Field Test in Business. In this article, the authors show that the use of the Major Field Test in Business for…

  12. CD-ROM Based Multimedia Homework Solutions and Self Test Generator.

    ERIC Educational Resources Information Center

    Rhodes, Jeffrey M.; Bell, Christopher C.

    1998-01-01

    Discusses a prototype multimedia application that was designed to help college students solve problems and generate practice tests for an economics textbook. Highlights include step-by-step problem solving; a friendly interface; student tracking; inexpensive development costs; examples of screen displays; and generating random, scored tests on…

  13. Thermal-Hydraulics and Electrochemistry of a Boiling Solution in a Porous Sludge Pile A Test Methodology

    SciTech Connect

    R.F. Voelker

    2001-05-03

    When boiling occurs in a pile of porous corrosion products (sludge), chemical species can concentrate. These species can react with the corrosion products and transform the sludge into a rock hard mass and/or create a corrosive environment. In-situ measurements are required to improve the understanding of this process, and the thermal-hydraulic and electrochemical environment in the pile. A test method is described that utilizes a water heated instrumented tube array in an autoclave to perform the in-situ measurements. As a proof of method feasibility, tests were performed in an alkaline phosphate solution. The test data is discussed. Temperature changes and electrochemical potential shifts were used to indicate when chemicals concentrate and if/when the pile hardens. Post-test examinations confirmed hardening occurred. Experiments were performed to reverse the hardening process. A one-dimensional model, utilizing capillary forces, was developed to understand the thermal-hydraulic measurements.

  14. Technology Solutions Case Study: Ventilation System Effectiveness and Tested Indoor Air Quality Impacts

    SciTech Connect

    A. Rudd and D. Bergey

    2015-08-01

    Ventilation system effectiveness testing was conducted at two unoccupied, single-family, detached lab homes at the University of Texas - Tyler. Five ventilation system tests were conducted with various whole-building ventilation systems. Multizone fan pressurization testing characterized building and zone enclosure leakage. PFT testing showed multizone air change rates and interzonal airflow filtration. Indoor air recirculation by a central air distribution system can help improve the exhaust ventilation system by way of air mixing and filtration. In contrast, the supply and balanced ventilation systems showed that there is a significant benefit to drawing outside air from a known outside location, and filtering and distributing that air. Compared to the Exhaust systems, the CFIS and ERV systems showed better ventilation air distribution and lower concentrations of particulates, formaldehyde and other VOCs.

  15. Solute changes during aquifer storage recovery testing in a limestone/clastic aquifer

    USGS Publications Warehouse

    Mirecki, J.E.; Campbell, B.G.; Conlon, K.J.; Petkewich, M.D.

    1998-01-01

    Aquifer storage recovery (ASR) was tested in the Santee Limestone/Black Mingo Aquifer near Charleston, South Carolina, to assess the feasibility for subsurface storage of treated drinking water. Water quality data obtained during two representative ASR tests were interpreted to show three things: (1) recovery efficiency of ASR in this geological setting; (2) possible changes in physical characteristics of the aquifer during ASR testing; and (3) water quality changes and potability of recovered water during short (one- and six-day) storage durations in the predominantly carbonate aquifer. Recovery efficiency for both ASR tests reported here was 54%. Successive ASR tests increased aquifer permeability of the Santee Limestone/Black Mingo Aquifer. It is likely that aquifer permeability increased during short storage periods due to dissolution of carbonate minerals and amorphous silica in aquifer material by treated drinking water. Dissolution resulted in an estimated 0.3% increase in pore volume of the permeable zones. Ground water composition generally evolved from a sodium-calcium bicarbonate water to a sodium chloride water during storage and recovery. After short duration, stored water can exceed the U.S. Environmental Protection Agency maximum contaminant level (MCL) for chloride (250 mg/L). However, sulfate, fluoride, and trihalomethane concentrations remained below MCLs during storage and recovery.Aquifer storage recovery (ASR) was tested in the Santee Limestone/Black Mingo Aquifer near Charleston, South Carolina, to assess the feasibility for subsurface storage of treated drinking water. Water quality data obtained during two representative ASR tests were interpreted to show three things: (1) recovery efficiency of ASR in this geological setting; (2) possible changes in physical characteristics of the aquifer during ASR testing; and (3) water quality changes and potability of recovered water during short (one- and six-day) storage durations in the predominantly

  16. Barometric pressure transient testing: Analysis methods and solution uniqueness: Final report

    SciTech Connect

    Hanson, J.M.

    1987-10-01

    Analysis of barometric pressure transients has been shown to be a useful tool in identifying the permeability structure in porous and permeable subsurface formations. The basic approach used in this technique requires monitoring surface barometric pressure fluctuations and the subsurface response to the surface pressure variation at one or more sensor locations over a period of time. These data are then used in conjunction with a given model of the subsurface to extract best estimates of one or more of the model parameters. A number of non-ideal conditions may affect solution uniqueness. These include the existence of noise on the data, sparse subsurface instrumentation, using an incorrect hole-formation model to interpret the data, and the frequency content of the recorded barometric pressure data. All of the work directed toward describing solution uniqueness and parameter uncertainty is presented. Other topics include refinement of several existing formation models, addressing the possibility of extracting an impulse response function from the measured data so that some kind of ''type-curve'' analysis can be applied, and the usefulness of carrying out the analysis in the frequency-domain. 5 refs., 21 figs., 10 tabs.

  17. Modernization of Physical Appearance and Solution Color Tests Using Quantitative Tristimulus Colorimetry: Advantages, Harmonization, and Validation Strategies.

    PubMed

    Pack, Brian W; Montgomery, Laura L; Hetrick, Evan M

    2015-10-01

    Color measurements, including physical appearance, are important yet often misunderstood and underappreciated aspects of a control strategy for drug substances and drug products. From a patient safety perspective, color can be an important control point for detecting contamination, impurities, and degradation products, with human visual acuity often more sensitive for colored impurities than instrumental techniques such as HPLC. Physical appearance tests and solution color tests can also serve an important role in ensuring that appropriate steps are taken such that clinical trials do not become unblinded when the active material is compared with another product or a placebo. Despite the importance of color tests, compendial visual tests are not harmonized across the major pharmacopoeias, which results in ambiguous specifications of little value, difficult communication of true sample color, and significant extra work required for global registration. Some pharmacopoeias have not yet recognized or adopted technical advances in the instrumental measurement of color and appearance, whereas others begin to acknowledge the advantage of instrumental colorimetry, yet leave implementation of the technology ambiguous. This commentary will highlight the above-mentioned inconsistencies, provide an avenue toward harmonization and modernization, and outline a scientifically sound approach for implementing quantitative technologies for improved measurement, communication, and control of color and appearance for both solutions and solids. Importantly, this manuscript, for the first time, outlines a color method validation approach that is consistent with the International Conference on Harmonization's guidance on the topic of method validation.

  18. Measurement invariance via multigroup SEM: Issues and solutions with chi-square-difference tests.

    PubMed

    Yuan, Ke-Hai; Chan, Wai

    2016-09-01

    Multigroup structural equation modeling (SEM) plays a key role in studying measurement invariance and in group comparison. When population covariance matrices are deemed not equal across groups, the next step to substantiate measurement invariance is to see whether the sample covariance matrices in all the groups can be adequately fitted by the same factor model, called configural invariance. After configural invariance is established, cross-group equalities of factor loadings, error variances, and factor variances-covariances are then examined in sequence. With mean structures, cross-group equalities of intercepts and factor means are also examined. The established rule is that if the statistic at the current model is not significant at the level of .05, one then moves on to testing the next more restricted model using a chi-square-difference statistic. This article argues that such an established rule is unable to control either Type I or Type II errors. Analysis, an example, and Monte Carlo results show why and how chi-square-difference tests are easily misused. The fundamental issue is that chi-square-difference tests are developed under the assumption that the base model is sufficiently close to the population, and a nonsignificant chi-square statistic tells little about how good the model is. To overcome this issue, this article further proposes that null hypothesis testing in multigroup SEM be replaced by equivalence testing, which allows researchers to effectively control the size of misspecification before moving on to testing a more restricted model. R code is also provided to facilitate the applications of equivalence testing for multigroup SEM. (PsycINFO Database Record

  19. Feasibility of HIV point-of-care tests for resource-limited settings: challenges and solutions.

    PubMed

    Stevens, Wendy; Gous, Natasha; Ford, Nathan; Scott, Lesley E

    2014-01-01

    Improved access to anti-retroviral therapy increases the need for affordable monitoring using assays such as CD4 and/or viral load in resource-limited settings. Barriers to accessing treatment, high rates of loss to initiation and poor retention in care are prompting the need to find alternatives to conventional centralized laboratory testing in certain countries. Strong advocacy has led to a rapidly expanding repertoire of point-of-care tests for HIV. point-of-care testing is not without its challenges: poor regulatory control, lack of guidelines, absence of quality monitoring and lack of industry standards for connectivity, to name a few. The management of HIV increasingly requires a multidisciplinary testing approach involving hematology, chemistry, and tests associated with the management of non-communicable diseases, thus added expertise is needed. This is further complicated by additional human resource requirements and the need for continuous training, a sustainable supply chain, and reimbursement strategies. It is clear that to ensure appropriate national implementation either in a tiered laboratory model or a total decentralized model, clear country-specific assessments need to be conducted. PMID:25197773

  20. SEM-EDS analysis of glass fibers corroded in physiological solutions by dynamic tests with variable flow rates.

    PubMed Central

    Lehuédé, P; de Meringo, A

    1994-01-01

    The dissolution of mineral fibers has been studied in simulated physiological fluids using a dynamic testing procedure. Fibers of different chemical composition and obtained by different processes with a mean diameter of about 1 micron, have been characterized with respect to their solubility under various test conditions of flow-rate. The surfaces were analyzed using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray diffraction techniques. SEM examinations show the formation of various corrosion patterns: porous, gel-like outer layers; precipitation zones and even, in some cases, no modification of the surface aspect. EDS analyses performed on the fibers, on the fiber surface layers, or on the deposits show three types of chemical composition: areas enriched in Al, in Ca and P, or in Al, Ca, and P. These surface compositions can be found for the same type of fiber tested, depending on the flow rate of the solution. Surface changes depend strongly on the initial composition of the glass and on the test conditions, particularly the flow rate. It is of particular interest to characterize the remaining surfaces (if any) obtained at the end of the in vitro test run and to compare them with surface analysis of the recovered fibers from the in vivo tests to assess the validity of the in vitro tests. Images Figure 1. A Figure 1. A Figure 1. B Figure 1. B PMID:7882960

  1. Heat-transfer tests of aqueous ethylene glycol solutions in an electrically heated tube

    NASA Technical Reports Server (NTRS)

    Bernardo, Everett; Eian, Carroll S

    1945-01-01

    As part of an investigation of the cooling characteristics of liquid-cooled engines, tests were conducted with an electrically heated single-tube heat exchanger to determine the heat-transfer characteristics of an-e-2 ethylene glycol and other ethylene glycol-water mixtures. Similar tests were conducted with water and commercial butanol (n-butyl alcohol) for check purposes. The results of tests conducted at an approximately constant liquid-flow rate of 0.67 pound per second (Reynolds number, 14,500 to 112,500) indicate that at an average liquid temperature 200 degrees f, the heat-transfer coefficients obtained using water, nominal (by volume) 30 percent-70 percent and 70 percent-30 percent glycol-water mixtures are approximately 3.8, 2.8, and 1.4 times higher, respectively, than the heat-transfer coefficients obtained using an-e-2 ethylene glycol.

  2. NREL Delivers In-Home HVAC Efficiency Testing Solutions (Fact Sheet)

    SciTech Connect

    Not Available

    2012-01-01

    Researchers at the National Renewable Energy Laboratory (NREL) have recently developed two simple in-home efficiency test methods that can be used by technicians, researchers, or interested homeowners to verify the correct operation and energy efficiency of a home's air conditioning equipment. An efficiency validation method for mini-split heat pumps (MSHPs) - highly efficient refrigerant-based air conditioning and heating systems that permit room-by-room conditioning and control - will enable building researchers to easily explore the installed performance of this class of equipment. MSHPs are very popular overseas and are gaining market share in energy efficient home upgrades throughout the United States. Yet, because MSHPs have multiple variable-speed components that work in tandem, their performance is challenging to measure in a real home. NREL researchers developed a field evaluation method including test equipment, methods, and data analysis to determine the installed performance of this equipment in occupied homes. A field test was conducted to validate the method. When testing a home's operation, it is often important to simulate occupancy within an unoccupied home. That way, the researcher will know the actual usage profiles for heat and moisture generation; this removes the uncertainty associated with real occupants. The second test method details a standardized protocol for generating heat and moisture loads, to mimic occupants and their activities by using heaters and humidifiers. Realistic heat and moisture loads can be used to drive air conditioning systems, evaluate air distribution systems, and examine building enclosure technologies. These loads are drawn from the Building America House Simulation Protocols. Proper application of the method will result in better comparison between performance of the test home and its simulated analogue. This method is also validated by field testing. These test methods are now available in two technical reports

  3. Aqueous solution synthesis of reduced graphene oxide-germanium nanoparticles and their electrical property testing

    NASA Astrophysics Data System (ADS)

    Yin, Huabin; Luo, Jinmei; Yang, Peihui; Yin, Pinghe

    2013-10-01

    Aqueous solution synthesis of reduced graphene oxide-germanium nanoparticles (RGO-GeNPs) was developed using graphene oxide (GO) as stabilizer, which could be conducive to obtain better excellent electrical properties. The information about morphology and chemical composition of the nanomaterials were obtained by TEM, FTIR, EDS, and XRD measurements. Stable aqueous dispersibility of RGO-GeNPs was further improved by poly(sodium 4-styrenesulfonate) (PSS) to obtain amphiphilic polymer-coated RGO-GeNPs (PSS-RGO-GeNPs). A possible mechanism to interpret the formation of RGO-GeNPs was proposed. The as-synthesized RGO-GeNPs showed excellent battery performance when used as an anode material for Li ion batteries. The resulting nanocomposites exhibited high specific capacity and good cycling stability after 80 cycles. This study showed a facile strategy to synthetize graphene and Ge nanocomposites which can be a hopeful anode material with excellent electrical properties for lithium ion batteries.

  4. Technology Solutions Case Study: Field Testing an Unvented Roof with Fibrous Insulation and Tiles

    SciTech Connect

    2015-11-01

    This case study by the U.S. Department of Energy’s Building America research team Building Science Corporation is a test implementation of an unvented tile roof assembly in a hot-humid climate (Orlando, Florida; zone 2A), insulated with air-permeable insulation (netted and blown fiberglass).

  5. Residual tests in the analysis of planned contrasts: Problems and solutions.

    PubMed

    Richter, Michael

    2016-03-01

    It is current practice that researchers testing specific, theory-driven predictions do not only use a planned contrast to model and test their hypotheses, but also test the residual variance (the C+R approach). This analysis strategy relies on work by Abelson and Prentice (1997), who suggested that the result of a planned contrast needs to be interpreted in light of the variance that is left after the variance explained by the contrast has been subtracted from the variance explained by the factors of the statistical model. Unfortunately, the C + R approach leads to 6 fundamental problems. In particular, the C + R approach (a) relies on the interpretation of a nonsignificant result as evidence for no effect, (b) neglects the impact of sample size, (c) creates problems for a priori power analyses, (d) may lead to significant effects that lack a meaningful interpretation, (e) may give rise to misinterpretations, and (f) is inconsistent with the interpretation of other statistical analyses. Given these flaws, researchers should refrain from testing the residual variance when conducting planned contrasts. Single contrasts, Bayes factors, and likelihood ratios provide reasonable alternatives that are less problematic.

  6. Technical Highlight: NREL Delivers In-Home HVAC Efficiency Testing Solutions

    SciTech Connect

    Dane Christensen

    2012-01-01

    Researchers at the National Renewable Energy Laboratory (NREL) have recently developed two simple in-home efficiency test methods that can be used by technicians, researchers, or interested homeowners to verify the correct operation and energy efficiency of a home’s air conditioning equipment.

  7. Differential reinforcement of alternative behavior increases resistance to extinction: clinical demonstration, animal modeling, and clinical test of one solution.

    PubMed

    Mace, F Charles; McComas, Jennifer J; Mauro, Benjamin C; Progar, Patrick R; Taylor, Bridget; Ervin, Ruth; Zangrillo, Amanda N

    2010-05-01

    Basic research with pigeons on behavioral momentum suggests that differential reinforcement of alternative behavior (DRA) can increase the resistance of target behavior to change. This finding suggests that clinical applications of DRA may inadvertently increase the persistence of target behavior even as it decreases its frequency. We conducted three coordinated experiments to test whether DRA has persistence-strengthening effects on clinically significant target behavior and then tested the effectiveness of a possible solution to this problem in both a nonhuman and clinical study. Experiment 1 compared resistance to extinction following baseline rates of reinforcement versus higher DRA rates of reinforcement in a clinical study. Resistance to extinction was substantially greater following DRA. Experiment 2 tested a rat model of a possible solution to this problem. Training an alternative response in a context without reinforcement of the target response circumvented the persistence-strengthening effects of DRA. Experiment 3 translated the rat model into a novel clinical application of DRA. Training an alternative response with DRA in a separate context resulted in lower resistance to extinction than employing DRA in the context correlated with reinforcement of target behavior. The value of coordinated bidirectional translational research is discussed.

  8. Technology Solutions Case Study: Field Testing an Unvented Roof with Asphalt Shingles in a Cold Climate

    SciTech Connect

    K. Ueno and J. Lstiburek

    2015-09-01

    Test houses with unvented roof assemblies were built to measure long-term moisture performance, in the Chicago area (5A) and the Houston area (2A). The Chicago-area test bed had seven experimental rafter bays, including a "control" vented compact roof, and six unvented roof variants with cellulose or fiberglass insulation. The interior was run at 50% RH. All roofs except the vented cathedral assembly experienced wood moisture contents and RH levels high enough to constitute failure. Disassembly at the end of the experiment showed that the unvented fiberglass roofs had wet sheathing and mold growth. In contrast, the cellulose roofs only had slight issues, such as rusted fasteners and sheathing grain raise.

  9. Genetic testing for retinal dystrophies and dysfunctions: benefits, dilemmas and solutions.

    PubMed

    Koenekoop, Robert K; Lopez, Irma; den Hollander, Anneke I; Allikmets, Rando; Cremers, Frans P M

    2007-07-01

    Human retinal dystrophies have unparalleled genetic and clinical diversity and are currently linked to more than 185 genetic loci. Genotyping is a crucial exercise, as human gene-specific clinical trials to study photoreceptor rescue are on their way. Testing confirms the diagnosis at the molecular level and allows for a more precise prognosis of the possible future clinical evolution. As treatments are gene-specific and the 'window of opportunity' is time-sensitive; accurate, rapid and cost-effective genetic testing will play an ever-increasing crucial role. The gold standard is sequencing but is fraught with excessive costs, time, manpower issues and finding non-pathogenic variants. Therefore, no centre offers testing of all currently 132 known genes. Several new micro-array technologies have emerged recently, that offer rapid, cost-effective and accurate genotyping. The new disease chips from Asper Ophthalmics (for Stargardt dystrophy, Leber congenital amaurosis [LCA], Usher syndromes and retinitis pigmentosa) offer an excellent first pass opportunity. All known mutations are placed on the chip and in 4 h a patient's DNA is screened. Identification rates (identifying at least one disease-associated mutation) are currently approximately 70% (Stargardt), approximately 60-70% (LCA) and approximately 45% (Usher syndrome subtype 1). This may be combined with genotype-phenotype correlations that suggest the causal gene from the clinical appearance (e.g. preserved para-arteriolar retinal pigment epithelium suggests the involvement of the CRB1 gene in LCA). As approximately 50% of the retinal dystrophy genes still await discovery, these technologies will improve dramatically as additional novel mutations are added. Genetic testing will then become standard practice to complement the ophthalmic evaluation. PMID:17651254

  10. Displacement and sweep efficiencies in a DNAPL recovery test using micellar and polymer solutions injected in a five-spot pattern.

    PubMed

    Martel, Richard; Hébert, Alain; Lefebvre, René; Gélinas, Pierre; Gabriel, Uta

    2004-11-01

    Soil washing with micellar solutions is a promising alternative for the remediation of DNAPL source zones. As with any flushing technology, the success of soil washing with micellar solutions depends in a very large part on the ability of the solution to contact the contaminant (sweep efficiency) and then on the efficiency of contaminant removal once this contact is made (displacement efficiency). We report here on a field test where a micellar solution was used to recover a DNAPL in an open five-spot pattern in which polymer solutions were also injected before and after the washing solution to improve sweep efficiency. The washing solution formulation was optimised in the laboratory prior to the test to obtain good dissolution capacity. For a high-concentration and low-volume soil flushing remediation test such as the one performed (0.8 pore volumes of actual washing solution injected), slug sizing of the washing solution is critical. It was evaluated by an analytical solution. In a five-spot pattern, the displacement efficiency of the washing solution was observed to vary in the porous medium as a function of the radial distance from the injection well because: (1) the volume of the washing solution flowing through a section of the test cell changes (maximum close to the injection well and minimal at the pumping wells); (2) the in situ velocity changes (maximum at the wells and minimum between the wells) and; (3) the contact time of the washing solution with the NAPL changes as a function of the distance from the injection well. The relative importance of the recovery mechanisms, mobilisation and dissolution, was also observed to vary in the test cell. The reduced velocity increased the contact time of the washing solution with the DNAPL enhancing its dissolution, but the decrease of the capillary number caused less mobilisation. The washing process is much more extensive around the injection well. The use of an injection-pumping pattern allowing a complete sweep

  11. Aqueous solution synthesis of reduced graphene oxide-germanium nanoparticles and their electrical property testing

    PubMed Central

    2013-01-01

    Aqueous solution synthesis of reduced graphene oxide-germanium nanoparticles (RGO-GeNPs) was developed using graphene oxide (GO) as stabilizer, which could be conducive to obtain better excellent electrical properties. The information about morphology and chemical composition of the nanomaterials were obtained by TEM, FTIR, EDS, and XRD measurements. Stable aqueous dispersibility of RGO-GeNPs was further improved by poly(sodium 4-styrenesulfonate) (PSS) to obtain amphiphilic polymer-coated RGO-GeNPs (PSS-RGO-GeNPs). A possible mechanism to interpret the formation of RGO-GeNPs was proposed. The as-synthesized RGO-GeNPs showed excellent battery performance when used as an anode material for Li ion batteries. The resulting nanocomposites exhibited high specific capacity and good cycling stability after 80 cycles. This study showed a facile strategy to synthetize graphene and Ge nanocomposites which can be a hopeful anode material with excellent electrical properties for lithium ion batteries. PMID:24134406

  12. [The Spanish translation of the Manual of Diagnostic Tests and Vaccines for Terrestrial Animals: current and future solutions].

    PubMed

    Díez, F Gutiérrez; León, F Crespo

    2004-12-01

    This article presents some of the problems that arose when preparing the Spanish translation of the Manual of Diagnostic Tests and Vaccines for Terrestrial Animals of the World Organisation for Animal Health (OIE). It contains a list of the language and translation problems encountered and the solutions that were found, some of which are only provisional. The problems are in part due to the lack of a multi-lingual terminological database approved by the OIE. The need for such a database, as well as for the harmonisation of veterinary terminology by the OIE Steering Committee and the Ad hoc Group on language policy, is discussed.

  13. Testing the biocompatibility of a glutathione-containing intra-ocular irrigation solution by using an isolated perfused bovine retina organ culture model - an alternative to animal testing.

    PubMed

    Januschowski, Kai; Zhour, Ahmad; Lee, Albert; Maddani, Ramin; Mueller, Sebastien; Spitzer, Martin S; Schnichels, Sven; Schultheiss, Maximilian; Doycheva, Deshka; Bartz-Schmidt, Karl-Ulrich; Szurman, Peter

    2012-03-01

    The effects of a glutathione-containing intra-ocular irrigation solution, BSS Plus©, on retinal function and on the survival of ganglion cells in whole-mount retinal explants were studied. Evidence is provided that the perfused ex vivo bovine retina can serve as an alternative to in vivo animal testing. Isolated bovine retinas were prepared and perfused with an oxygen-saturated standard irrigation solution, and an electroretinogram was recorded to assess retinal function. After stable b-waves were detected, the isolated retinas were perfused with BSS Plus for 45 minutes. To investigate the effects of BSS Plus on photoreceptor function, 1mM aspartate was added to the irrigation solution in order to obtain a-waves, and the ERG trace was monitored for 75 minutes. For histological analysis, isolated whole retinal mounts were stored for 24 hours at 4°C, in the dark. The percentages of cell death in the retinal ganglion cell layer and in the outer and inner nuclear layers were estimated by using an ethidium homodimer-1 stain and the TUNEL assay. General swelling of the retina was examined with high-resolution optical coherence tomography. During perfusion with BSS Plus, no significant changes in a-wave and b-wave amplitudes were recorded. Retinas stored for 24 hours in BSS Plus showed a statistically significant smaller percentage (52.6%, standard deviation [SD] = 16.1%) of cell death in the retinal ganglion cell layer compared to the control group (69.6%, SD = 3.9, p = 0.0031). BSS Plus did not seem to affect short-term retinal function, and had a beneficial effect on the survival of retinal ganglion cells. This method for analysing the isolated perfused retina represents a valuable alternative for testing substances for their retinal biocompatibility and toxicity.

  14. Photodegradation of fluorene in aqueous solution: Identification and biological activity testing of degradation products.

    PubMed

    Kinani, Said; Souissi, Yasmine; Kinani, Aziz; Vujović, Svetlana; Aït-Aïssa, Sélim; Bouchonnet, Stéphane

    2016-04-15

    Degradation of fluorene under UV-vis irradiation in water was investigated and structural elucidation of the main photoproducts was achieved using gas chromatography coupled with mass spectrometry. Twenty-six photoproducts were structurally identified, mainly on the basis of electron ionization mass spectra interpretation. The main generated transformation products are hydroxy derivatives. Some secondary photoproducts including fluorenone, hydroxy fluorenone, 2-biphenyl carboxylic acid, biphenylene, methanol fluorene congeners and hydroxy fluorene dimers were also observed. A photodegradation pathway was suggested on the basis of the chemical structures of photoproducts. Fluorene as well as its main photoproducts for which chemical standards were commercially available were tested for their ability to elicit cytotoxic, estrogenic and dioxin-like activity by using in vitro cell-based bioassays. None of the tested compounds was cytotoxic at concentrations up to 100 μM. However, 2-hydroxyfluorene and 3-hydroxyfluorene exerted significant estrogenic and dioxin-like activity on a concentration range of 3-30 μM, while fluorene and 9-hydroxyfluorene were weakly or not active, respectively, in our assays. This supports the view that photodegradation processes can generate by-products of higher toxicological concern than the parent compound and strengthens the need to further identify transformation products in the aquatic environment.

  15. Robust diagnostic genetic testing using solution capture enrichment and a novel variant-filtering interface.

    PubMed

    Watson, Christopher M; Crinnion, Laura A; Morgan, Joanne E; Harrison, Sally M; Diggle, Christine P; Adlard, Julian; Lindsay, Helen A; Camm, Nick; Charlton, Ruth; Sheridan, Eamonn; Bonthron, David T; Taylor, Graham R; Carr, Ian M

    2014-04-01

    Targeted hybridization enrichment prior to next-generation sequencing is a widespread method for characterizing sequence variation in a research setting, and is being adopted by diagnostic laboratories. However, the number of variants identified can overwhelm clinical laboratories with strict time constraints, the final interpretation of likely pathogenicity being a particular bottleneck. To address this, we have developed an approach in which, after automatic variant calling on a standard unix pipeline, subsequent variant filtering is performed interactively, using AgileExomeFilter and AgilePindelFilter (http://dna.leeds.ac.uk/agile), tools designed for clinical scientists with standard desktop computers. To demonstrate the method's diagnostic efficacy, we tested 128 patients using (1) a targeted capture of 36 cancer-predisposing genes or (2) whole-exome capture for diagnosis of the genetically heterogeneous disorder primary ciliary dyskinesia (PCD). In the cancer cohort, complete concordance with previous diagnostic data was achieved across 793 variant genotypes. A high yield (42%) was also achieved for exome-based PCD diagnosis, underscoring the scalability of our method. Simple adjustments to the variant filtering parameters further allowed the identification of a homozygous truncating mutation in a presumptive new PCD gene, DNAH8. These tools should allow diagnostic laboratories to expand their testing portfolios flexibly, using a standard set of reagents and techniques.

  16. Is There a Space-Based Technology Solution to Problems with Preclinical Drug Toxicity Testing?

    PubMed

    Hammond, Timothy; Allen, Patricia; Birdsall, Holly

    2016-07-01

    Even the finest state-of-the art preclinical drug testing, usually in primary hepatocytes, remains an imperfect science. Drugs continue to be withdrawn from the market due to unforeseen toxicity, side effects, and drug interactions. The space program may be able to provide a lifeline. Best known for rockets, space shuttles, astronauts and engineering, the space program has also delivered some serious medical science. Optimized suspension culture in NASA's specialized suspension culture devices, known as rotating wall vessels, uniquely maintains Phase I and Phase II drug metabolizing pathways in hepatocytes for weeks in cell culture. Previously prohibitively expensive, new materials and 3D printing techniques have the potential to make the NASA rotating wall vessel available inexpensively on an industrial scale. Here we address the tradeoffs inherent in the rotating wall vessel, limitations of alternative approaches for drug metabolism studies, and the market to be addressed. Better pre-clinical drug testing has the potential to significantly reduce the morbidity and mortality of one of the most common problems in modern medicine: adverse events related to pharmaceuticals.

  17. Is There a Space-Based Technology Solution to Problems with Preclinical Drug Toxicity Testing?

    PubMed

    Hammond, Timothy; Allen, Patricia; Birdsall, Holly

    2016-07-01

    Even the finest state-of-the art preclinical drug testing, usually in primary hepatocytes, remains an imperfect science. Drugs continue to be withdrawn from the market due to unforeseen toxicity, side effects, and drug interactions. The space program may be able to provide a lifeline. Best known for rockets, space shuttles, astronauts and engineering, the space program has also delivered some serious medical science. Optimized suspension culture in NASA's specialized suspension culture devices, known as rotating wall vessels, uniquely maintains Phase I and Phase II drug metabolizing pathways in hepatocytes for weeks in cell culture. Previously prohibitively expensive, new materials and 3D printing techniques have the potential to make the NASA rotating wall vessel available inexpensively on an industrial scale. Here we address the tradeoffs inherent in the rotating wall vessel, limitations of alternative approaches for drug metabolism studies, and the market to be addressed. Better pre-clinical drug testing has the potential to significantly reduce the morbidity and mortality of one of the most common problems in modern medicine: adverse events related to pharmaceuticals. PMID:27183841

  18. Functional test of pedotransfer functions to predict water flow and solute transport with the dual-permeability model MACRO

    NASA Astrophysics Data System (ADS)

    Moeys, J.; Larsbo, M.; Bergström, L.; Brown, C. D.; Coquet, Y.; Jarvis, N. J.

    2012-02-01

    Estimating pesticide leaching risks at the regional scale requires the ability to completely parameterise a pesticide fate model using only survey data, such as soil and land-use maps. Such parameterisation usually rely on a set of lookup tables and (pedo)transfer functions, relating elementary soil and site properties to model parameters. The aim of this paper is to describe and test a complete set of parameter estimation algorithms developed for the pesticide fate model MACRO, which accounts for preferential flow in soil macropores. We used tracer monitoring data from 16 lysimeter studies, carried out in three European countries, to evaluate the ability of MACRO and this "blind parameterisation" scheme to reproduce measured solute leaching at the base of each lysimeter. We focused on the prediction of early tracer breakthrough due to preferential flow, because this is critical for pesticide leaching. We then calibrated a selected number of parameters in order to assess to what extent the prediction of water and solute leaching could be improved. Our results show that water flow was generally reasonably well predicted (median model efficiency, ME, of 0.42). Although the general pattern of solute leaching was reproduced well by the model, the overall model efficiency was low (median ME = -0.26) due to errors in the timing and magnitude of some peaks. Preferential solute leaching at early pore volumes was also systematically underestimated. Nonetheless, the ranking of soils according to solute loads at early pore volumes was reasonably well estimated (concordance correlation coefficient, CCC, between 0.54 and 0.72). Moreover, we also found that ignoring macropore flow leads to a significant deterioration in the ability of the model to reproduce the observed leaching pattern, and especially the early breakthrough in some soils. Finally, the calibration procedure showed that improving the estimation of solute transport parameters is probably more important than the

  19. Functional test of pedotransfer functions to predict water flow and solute transport with the dual-permeability model MACRO

    NASA Astrophysics Data System (ADS)

    Moeys, J.; Larsbo, M.; Bergström, L.; Brown, C. D.; Coquet, Y.; Jarvis, N. J.

    2012-07-01

    Estimating pesticide leaching risks at the regional scale requires the ability to completely parameterise a pesticide fate model using only survey data, such as soil and land-use maps. Such parameterisations usually rely on a set of lookup tables and (pedo)transfer functions, relating elementary soil and site properties to model parameters. The aim of this paper is to describe and test a complete set of parameter estimation algorithms developed for the pesticide fate model MACRO, which accounts for preferential flow in soil macropores. We used tracer monitoring data from 16 lysimeter studies, carried out in three European countries, to evaluate the ability of MACRO and this "blind parameterisation" scheme to reproduce measured solute leaching at the base of each lysimeter. We focused on the prediction of early tracer breakthrough due to preferential flow, because this is critical for pesticide leaching. We then calibrated a selected number of parameters in order to assess to what extent the prediction of water and solute leaching could be improved. Our results show that water flow was generally reasonably well predicted (median model efficiency, ME, of 0.42). Although the general pattern of solute leaching was reproduced well by the model, the overall model efficiency was low (median ME = -0.26) due to errors in the timing and magnitude of some peaks. Preferential solute leaching at early pore volumes was also systematically underestimated. Nonetheless, the ranking of soils according to solute loads at early pore volumes was reasonably well estimated (concordance correlation coefficient, CCC, between 0.54 and 0.72). Moreover, we also found that ignoring macropore flow leads to a significant deterioration in the ability of the model to reproduce the observed leaching pattern, and especially the early breakthrough in some soils. Finally, the calibration procedure showed that improving the estimation of solute transport parameters is probably more important than the

  20. CORROSION TESTING OF CARBON STEEL IN OXALIC ACID CHEMICAL CLEANING SOLUTIONS

    SciTech Connect

    Wiersma, B.; Mickalonis, J.; Subramanian, K.; Ketusky, E.

    2011-10-14

    Radioactive liquid waste has been stored in underground carbon steel tanks for nearly 60 years at the Savannah River Site. The site is currently in the process of removing the waste from these tanks in order to place it into vitrified, stable state for longer term storage. The last stage in the removal sequence is a chemical cleaning step that breaks up and dissolves metal oxide solids that cannot be easily pumped out of the tank. Oxalic acid has been selected for this purpose because it is an effective chelating agent for the solids and is not as corrosive as other acids. Electrochemical and immersion studies were conducted to investigate the corrosion behavior of carbon steel in simulated chemical cleaning environments. The effects of temperature, agitation, and the presence of sludge solids in the oxalic acid on the corrosion rate and the likelihood of hydrogen evolution were determined. The testing showed that the corrosion rates decreased significantly in the presence of the sludge solids. Corrosion rates increased with agitation, however, the changes were less noticeable.

  1. A Methodology for Confirmatory Testing of Numerical Models of Groundwater Flow and Solute Transport in Fractured Crystalline Rock

    NASA Astrophysics Data System (ADS)

    Hartley, L.; Follin, S.; Rhen, I.; Selroos, J.

    2008-12-01

    Three-dimensional, regional, numerical models of groundwater flow and solute transport in fractured crystalline rock are used for two sites in Sweden that are considered for geological disposal of spent nuclear fuel. The models are used to underpin the conceptual modeling that is based on multi-disciplinary data and include descriptions of the geometry of geological features (deformation zones and fracture networks), transient hydrological and chemical boundary conditions, strong spatial heterogeneity in the hydraulic properties, density driven flow, solute transport including rock matrix diffusion, and mixing of different water types in a palaeo-hydrogeological perspective (last 10,000 years). From a credibility point of view, comparisons between measured and simulated data are important and provide a means to address our ability to understand complex hydrogeological systems, and hence what particular applications of a hydrogeological model of a physical system that are justified, e.g. in subsequent repository performance assessment studies. For instance, it has been suggested that an understanding of the hydrochemical evolution throughout geological time is a powerful tool to predict the future evolution of groundwater flow and its chemical composition. The general approach applied in the numerical modeling was to first parameterize the deformation zones and fracture networks hydraulically using fracture and inflow data from single-hole tests. Second, the confirmatory step relies on using essentially the same groundwater flow and solute transport model in terms of grid discretization and parameter settings for matching three types of independent field data: 1) large-scale cross-hole (interference) tests, 2) long-term monitoring of groundwater levels, and 3) hydrochemical composition of fracture water and matrix pore water in deep boreholes. We demonstrate here the modelling approach of the second step - confirmatory testing - using data from the site

  2. Reactivity of Hontomín carbonate rocks to acidic solution injection: reactive "push-pull" tracer tests results

    NASA Astrophysics Data System (ADS)

    De Gaspari, Francesca; Cabeza, Yoar; Luquot, Linda; Rötting, Tobias; Saaltink, Maarten W.; Carrera, Jesus

    2014-05-01

    Several field tests will be carried out in order to characterize the reservoir for CO2 injection in Hontomín (Burgos, Spain) as part of the Compostilla project of "Fundación Ciudad de la Energía" (CIUDEN). Once injected, the dissolution of the CO2 in the resident brine will increase the acidity of the water and lead to the dissolution of the rocks, constituted mainly by carbonates. This mechanism will cause changes in the aquifer properties such as porosity and permeability. To reproduce the effect of the CO2 injection, a reactive solution with 2% of acetic acid is going to be injected in the reservoir and extracted from the same well (reactive "push-pull" tracer tests) to identify and quantify the geochemical reactions occurring into the aquifer. The reactivity of the rock will allow us also to evaluate the changes of its properties. Previously, theoretical calculations of Damkhöler numbers were done to determine the acid concentrations and injection flow rates needed to generate ramified-wormholes patterns, during theses "push-pull" experiments. The aim of this work is to present the results and a preliminary interpretation of the field tests.

  3. Analytical solutions and numerical tests of elastic and failure behaviors of close-packed lattice for brittle rocks and crystals

    NASA Astrophysics Data System (ADS)

    Liu, Chu; Pollard, David D.; Shi, Bin

    2013-01-01

    Analytical solutions of elastic properties and failure modes of a two-dimensional close-packed discrete element model are proposed. Based on the assumption of small deformation, the conversion formulas between five inter-particle parameters of the lattice model and rock mechanical properties were derived. Using the formulas, the inter-particle parameters can be determined by Young's modulus (E), Poisson's ratio (v), tensile strength (Tu), compressive strength (Cu), and coefficient of intrinsic friction (μi). The lattice defined by the parameters simulates the elastic and failure behaviors of rocks and crystals and therefore can be used to investigate the initiation and development of geological structures quantitatively. Furthermore, the solutions also provide a theoretical basis for the calibration of parameters of random discrete assemblies. The model of quartz was used as an example to validate the formulas and test the errors. The simulated results show that E and v converge to theoretical values when particle number increases. These elastic properties are almost constant when the magnitude of strain is lower than 10-3. The simulated Tu and Cu of a single three-element unit are also consistent with the formulas. However, due to the boundary effects and stress concentrations, Tu and Cu of lattices with multiple units are lower than the values predicted by the formulas. Therefore, greater Tu and Cu can be used in the formulas to counteract this effect. The model is applicable to the simulation of complicated structures that involve deformation and failure at different scales.

  4. Using Multiple Watershed-scale Dye Tracing Tests to Study Water and Solute Transport in Naturally Obstructed Stream Channels

    NASA Astrophysics Data System (ADS)

    Jin, L.; Meeks, J. L.; Hubbard, K. A.; Kurian, L. M.; Siegel, D. I.; Lautz, L. K.; Otz, M. H.

    2007-12-01

    Temporary storage of surface water at channel sides and pools significantly affects water and solute transport downstream in watersheds. Beavers, natural "stream channel engineers", build dams which obstruct stream flow and temporarily store water in small to large ponds within stream channels. These ponds substantially delay water movement and increase the water residence time in the system. To study how water and solutes move through these obstructed stream channels, we did multiple dye tracing tests at Cherry Creek, a main tributary to Red Canyon Creek (Wind River Range, Wyoming). First we surveyed beaver dam distributions in detail within the study reaches. We then introduced dyes four times from July 2nd to 6th, 2007 using a scale-up approach. The observation site was fixed at the mouth of Cherry Creek, and 1.5 grams of Rhodamine WT (RWT) dye was injected sequentially at upstream sites with increasing test reach length. The reach lengths scaled up from 500m to 2.5 km. A field fluorometer recorded RWT concentrations every 15 seconds. The results show non-linear decreases of the peak concentration of the dye tracing cloud as the reach scaled up. Also, the times to 1.) the arrivals of the leading edges (Tl), 2.) the peak concentrations (Tp) and 3.) the tailing edges (Tt) and 4) the durations of the tracer cloud (Td) behaved non-linearly as function of length scale. For example, plots of arrivals of leading edges and tailing edges with scale distance appear to define curves of the form; Tl=27.665e1.07× Distance (r2=0.99) and Tt=162.62e0.8551× Distance (r2=0.99), respectively. The greatest non-linearity occurred for the time of tailing and the least for the time of leading edge. These observations are consistent with what would be expected with greater density of dams and/or storage volumes as the reach length increased upgradient. To come to a first approximation, we are currently modeling the breakthrough curves with the solute transport code OTIS to address

  5. Small-scale cookoff bomb (SSCB) tests on solutions of DMSO/LX-10-1 and DMSO/PBX-9404

    SciTech Connect

    Helm, F.; Hoffman, D.M.

    1994-09-28

    The small-scale cookoff bomb test was developed by the Navy at China Lake as a method for evaluation of the violence of thermal decomposition of explosives and propellants. The UN {open_quotes}Recommendations on the Transport of Dangerous Goods - Tests and Criteria{close_quotes} (ST/SG/AC.10/11) have accepted the small-scale cookoff bomb test as a test for classification of a substance as an explosive (class 1 substance) for storage and shipment. The US Departments of Transportation and Defense have agreed to use the UN tests as US criteria for storage and shipment. The UN scheme is designed to assess the relative hazard of explosives so that an appropriate classification for transport can be made by the competent authority (DOT). Three thermal tests have been approved: the Koenen test, the internal ignition test and the small-scale cookoff bomb (SSCB) test. Lawrence Livermore National Laboratory has designed a dissolution work station for removal of the plastic bonded explosives (PBXs) LX-10-1 and PBX-9404 from two artillery fired atomic projectiles (AFAPs) using dimethyl sulfoxide (DMSO) as the solvent. The DOE Explosives Safety Manual allows up to 33% solutions of explosives to be handled as non-explosive in the laboratory and 25% solutions to be stored as non-explosives unless the explosive precipitates out. In order to ship solutions of LX-10-1 or PBX-9404 in DMSO on US highways for waste or recycling as non-explosives, these solutions must be approved for shipping by the DOT based on the results of UN test series 1. The compositions of LX-10-1 and PBX-9404 are given in Table 1. The shock sensitivity of solutions of these two plastic bonded explosives in dimethyl sulfoxide (DMSO) has been evaluated using the UN series 1 gap test for liquids as described in a previous report. The purpose of this paper is to present the results of the SSCB tests on pure DMSO and 25% PBX solutions in DMSO to assist in the classification of these solutions.

  6. An Experimental Copyright Moratorium: Study of a Proposed Solution to the Copyright Photocopying Problem. Final Report to the American Society for Testing and Materials (ASTM).

    ERIC Educational Resources Information Center

    Heilprin, Laurence B.

    The Committee to Investigate Copyright Problems (CICP), a non-profit organization dedicated to resolving the conflict known as the "copyright photocopying problem" was joined by the American Society for Testing and Materials (ASTM), a large national publisher of technical and scientific standards, in a plan to simulate a long-proposed solution to…

  7. [Distribution of Luliconazole in Nail Plate by In Vitro Permeation and Efficacy by Zone of Inhibition Test after Treatment of Luliconazole Nail Solution].

    PubMed

    Shimamura, Tsuyoshi; Miyamae, Akiko; Arai, Masakazu; Minemura, Aya; Nozawa, Akira; Kubota, Nobuo

    2016-01-01

    To clarify the character of luliconazole nail solution we have developed, we investigated luliconazole distribution and antifungal activity in nail plate. An in vitro permeation study which measured luliconazole concentration of sliced nail in the transverse direction after treatment of luliconazole nail solution was conducted to investigate for concentration dependency and the influences of nail thickness and treatment duration. When 0.2, 1, 3, 5, and 7.5% luliconazole nail solutions were used, luliconazole was detected in the all the layers of nail and there was a concentration gradient from the dorsal side to deep nail layers. The luliconazole concentration was almost same after 14-day treatment with 5% luliconazole nail solution when using nails of different thicknesses. And we confirmed that concentration of luliconazole into the nail was increased depending on the treatment duration. In zone of inhibition test after 14-day treatment, 5% luliconazole nail solution showed statistically high formation rate of zones of inhibition compared to 8% ciclopirox nail lacquer. Above all, these data suggested that 5% luliconazole nail solution has the potential to show high therapeutic effect for onychomycosis.

  8. Simple solutions to false results with plate/slide agglutination tests in diagnosis of infectious diseases of man and animals

    PubMed Central

    Saxena, Hari Mohan; Chothe, Shubhada; Kaur, Paviter

    2015-01-01

    We have developed a new Superagglutination test for serodiagnosis of infectious diseases. It differs from conventional plate/slide agglutination tests (PAT/SAT) by three additional steps: prior staining of serum antibody by adding a dye and addition of diluted biotinylated antiglobulin and avidin in sequence after mixing the antigen with the test serum. The new steps circumvent the problems of false positive and false negative results of PAT/SAT. In serodiagnosis of brucellosis, Superagglutination test had higher positive predictive value and specificity than Rose Bengal Plate Test (RBPT) and Standard Tube Agglutination Test (STAT) and higher negative predictive value and sensitivity than RBPT, STAT, ELISA and Complement Fixation Test (CFT).•Superagglutination is a simple, accurate and economic screening test for infections.•More specificity, sensitivity, positive & negative predictive value than RBPT, STAT.•More sensitivity, negative predictive value than ELISA and Complement Fixation Test. PMID:26844209

  9. Contact lens care solution killing efficacy against Acanthamoeba castellanii by in vitro testing and live-imaging.

    PubMed

    Kolar, Satya Sree N; Manarang, Joseph C; Burns, Alan R; Miller, William L; McDermott, Alison M; Bergmanson, Jan P G

    2015-12-01

    In the past decade there has been an increased incidence of Acanthamoeba keratitis, particularly in contact lens wearers. The aim of this study was to utilize in vitro killing assays and to establish a novel, time-lapse, live-cell imaging methodology to demonstrate the efficacy of contact lens care solutions in eradicating Acanthamoeba castellanii (A. castellanii) trophozoites and cysts. Standard qualitative and quantitative in vitro assays were performed along with novel time-lapse imaging coupled with fluorescent dye staining that signals cell death. Quantitative data obtained demonstrated that 3% non-ophthalmic hydrogen peroxide demonstrated the highest percent killing at 87.4% corresponding to a 4.4 log kill. The other contact lens care solutions which showed a 72.9 to 29.2% killing which was consistent with 4.3-2.8 log reduction in trophozoite viability. Both analytical approaches revealed that polyquaternium/PHMB-based was the least efficacious in terms of trophicidal activity. The cysticidal activity of the solutions was much less than activity against trophozoites and frequently was not detected. Live-imaging provided a novel visual endpoint for characterizing the trophocidal activity of the care solutions. All solutions caused rapid rounding or pseudocyst formation of the trophozoites, reduced motility and the appearance of different morphotypes. Polyquaternium/alexidine-based and peroxide-based lens care system induced the most visible damage indicated by significant accumulation of debris from ruptured cells. Polyquaternium/PHMB-based was the least effective showing rounding of the cells but minimal death. These observations are in keeping with care solution biocides having prominent activity at the plasma membrane of Acanthamoeba.

  10. Contact lens care solution killing efficacy against Acanthamoeba castellanii by in vitro testing and live-imaging.

    PubMed

    Kolar, Satya Sree N; Manarang, Joseph C; Burns, Alan R; Miller, William L; McDermott, Alison M; Bergmanson, Jan P G

    2015-12-01

    In the past decade there has been an increased incidence of Acanthamoeba keratitis, particularly in contact lens wearers. The aim of this study was to utilize in vitro killing assays and to establish a novel, time-lapse, live-cell imaging methodology to demonstrate the efficacy of contact lens care solutions in eradicating Acanthamoeba castellanii (A. castellanii) trophozoites and cysts. Standard qualitative and quantitative in vitro assays were performed along with novel time-lapse imaging coupled with fluorescent dye staining that signals cell death. Quantitative data obtained demonstrated that 3% non-ophthalmic hydrogen peroxide demonstrated the highest percent killing at 87.4% corresponding to a 4.4 log kill. The other contact lens care solutions which showed a 72.9 to 29.2% killing which was consistent with 4.3-2.8 log reduction in trophozoite viability. Both analytical approaches revealed that polyquaternium/PHMB-based was the least efficacious in terms of trophicidal activity. The cysticidal activity of the solutions was much less than activity against trophozoites and frequently was not detected. Live-imaging provided a novel visual endpoint for characterizing the trophocidal activity of the care solutions. All solutions caused rapid rounding or pseudocyst formation of the trophozoites, reduced motility and the appearance of different morphotypes. Polyquaternium/alexidine-based and peroxide-based lens care system induced the most visible damage indicated by significant accumulation of debris from ruptured cells. Polyquaternium/PHMB-based was the least effective showing rounding of the cells but minimal death. These observations are in keeping with care solution biocides having prominent activity at the plasma membrane of Acanthamoeba. PMID:26208952

  11. Influence of ingesting a carbohydrate-electrolyte solution before and during a 1-hr running performance test.

    PubMed

    Rollo, Ian; Williams, Clyde

    2009-12-01

    The aim of this study was to investigate the influence of ingesting a carbohydrate-electrolyte solution (CHO-E) on performance during a 1-hr treadmill run. Eight male endurance-trained runners (age 31 +/- 8 yr, M +/- SD) completed three 1-hr performance runs separated by 1 wk. The study used a double-blind placebo (PLA) controlled design. On 2 occasions (P1, P2) runners consumed a placebo solution, 8 ml/kg body mass (BM), 30 min before and 2 ml/kg BM at 15-min intervals throughout the 1-hr run. On a separate occasion they consumed the same quantity of a 6.4% CHO-E solution (C). Total distances covered for P1, P2, and C trials were 13,685 +/- 1,116 m, 13,715 +/- 1,143 m, and 14,046 +/- 1,104 m, respectively. Although there was no difference between the 2 PLA trials (p > .05), the distance covered during the C trial was significantly greater than in either PLA trial (p < .05). CHO ingestion resulted in a higher blood glucose concentration only at the onset of exercise (p < .05) compared with the PLA trials. Blood lactate, respiratory-exchange ratio, and CHO oxidation were similar in all 3 trials. In conclusion, ingestion of a 6.4% CHO-E solution before and during exercise was associated with improved running performance in runners compared with the ingestion of a color- and taste-matched placebo.

  12. [Preparation of HPLC test solutions for organic impurities in aluminum lakes of food red no. 40 (allura red AC) and food yellow no. 5 (sunset yellow FCF)].

    PubMed

    Tsuji, S; Umino, Y; Amakura, Y; Tonogai, Y

    2001-12-01

    The HPLC determination of organic impurities in Food Red No. 40 aluminum lakes (R-40Als) as directed by Japan's Specifications and Standards for Food Additives, 7th Ed. (JSFA-VII), has problems, such as reproducibility and low recovery. ICP analyses suggested that the problem was caused by the aluminum in the test solution. In the improved method for preparation of the test solution, aluminum was precipitated as a hydroxide gel by boiling with 1% aqueous ammonia. After centrifugation, the supernatant was used for the HPLC analysis of the organic impurities in the lakes. Recoveries of organic impurities were more than 85% from R-40Al spiked at the 0.1 and 1.0% levels of R-40. The proposed method was also adapted for Food Yellow No. 5 aluminum lakes.

  13. Fiber Attachment Module Experiment (FAME): Using a Multiplexed Miniature Hollow Fiber Membrane Bioreactor Solution for Rapid Process Testing

    NASA Technical Reports Server (NTRS)

    Coutts, Janelle L.; Lunn, Griffin M.; Koss, Lawrence L.; Hummerick, Mary E.; Spencer, Lachelle E.; Johnsey, Marissa N.; Richards, Jeffrey T.; Ellis, Ronald; Birmele, Michele N.; Wheeler, Raymond M.

    2014-01-01

    Bioreactor research is mostly limited to continuous stirred-tank reactors (CSTRs) which are not an option for microgravity (g) applications due to the lack of a gravity gradient to drive aeration as described by the Archimedes principle. Bioreactors and filtration systems for treating wastewater in g could avoid the need for harsh pretreatment chemicals and improve overall water recovery. Solution: Membrane Aerated Bioreactors (MABRs) for g applications, including possible use for wastewater treatment systems for the International Space Station (ISS).

  14. Differences in soil solution chemistry between soils amended with nanosized CuO or Cu reference materials: implications for nanotoxicity tests.

    PubMed

    McShane, Heather V A; Sunahara, Geoffrey I; Whalen, Joann K; Hendershot, William H

    2014-07-15

    Soil toxicity tests for metal oxide nanoparticles often include micrometer-sized oxide and metal salt treatments to distinguish between toxicity from nanometer-sized particles, non-nanometer-sized particles, and dissolved ions. Test result will be confounded if each chemical form has different effects on soil solution chemistry. We report on changes in soil solution chemistry over 56 days-the duration of some standard soil toxicity tests-in three soils amended with 500 mg/kg Cu as nanometer-sized CuO (nano), micrometer-sized CuO (micrometer), or Cu(NO3)2 (salt). In the CuO-amended soils, the log Cu2+ activity was initially low (minimum -9.48) and increased with time (maximum -5.20), whereas in the salt-amended soils it was initially high (maximum -4.80) and decreased with time (minimum -6.10). The Cu2+ activity in the nano-amended soils was higher than in the micrometer-amended soils for at least the first 11 days, and lower than in the salt-amended soils for at least 28 d. The pH, and dissolved Ca and Mg concentrations in the CuO-amended soils were similar, but the salt-amended soils had lower pH for at least 14 d, and higher Ca and Mg concentrations throughout the test. Soil pretreatments such as leaching and aging prior to toxicity tests are suggested.

  15. Tear volume estimation using a modified Schirmer test: a randomized, multicenter, double-blind trial comparing 3% diquafosol ophthalmic solution and artificial tears in dry eye patients

    PubMed Central

    Miyake, Hideki; Kawano, Yuri; Tanaka, Hiroshi; Iwata, Akihiro; Imanaka, Takahiro; Nakamura, Masatsugu

    2016-01-01

    Purpose We aimed to evaluate the feasibility of using a modified Schirmer test to determine the increase in tear volume after administration of 3% diquafosol ophthalmic solution (diquafosol 3%) in dry eye patients. Patients and methods A randomized, multicenter, prospective, double-blind clinical study recruited 50 qualified subjects. They received diquafosol 3% in one eye and artificial tears in the other eye. The study protocol comprised a screening and treatment procedure completed within 1 day. The Schirmer test was performed on closed eyes three times a day. The primary efficacy end points were the second Schirmer test scores 10 minutes after the single dose. Secondary end points were the third Schirmer test scores 3 hours and 40 minutes after the single dose and the symptom scores prior to the second and third Schirmer tests. Results According to the Schirmer test, 10 minutes after administration, diquafosol 3% significantly increased tear volume compared to artificial tears. Diquafosol 3% and artificial tears both showed significant improvements in the symptom scores compared to baseline. However, there was no significant difference in the symptoms score between diquafosol 3% and artificial tears. Conclusion The modified Schirmer test can detect a minute change in tear volume in dry eye patients. These findings will be useful in the diagnosis of dry eye, assessment of treatment benefits in daily clinical practice, and the development of possible tear-secreting compounds for dry eye. PMID:27257372

  16. Safety evaluation of the ITP filter/stripper test runs and quiet time runs using simulant solution. Revision 3

    SciTech Connect

    Gupta, M.K.

    1994-06-01

    The purpose is to provide the technical bases for the evaluation of Unreviewed Safety Question for the In-Tank Precipitation (ITP) Filter/Stripper Test Runs (Ref. 7) and Quiet Time Runs Program (described in Section 3.6). The Filter/Stripper Test Runs and Quiet Time Runs program involves a 12,000 gallon feed tank containing an agitator, a 4,000 gallon flush tank, a variable speed pump, associated piping and controls, and equipment within both the Filter and the Stripper Building.

  17. Mobile Distance Learning with PDAs: Development and Testing of Pedagogical and System Solutions Supporting Mobile Distance Learners

    ERIC Educational Resources Information Center

    Rekkedal, Torstein; Dye, Aleksander

    2007-01-01

    The article discusses basic teaching-learning philosophies and experiences from the development and testing of mobile learning integrated with the online distance education system at NKI (Norwegian Knowledge Institute) Distance Education. The article builds on experiences from three European Union (EU) supported "Leonardo da Vinci" projects on…

  18. Multidimensional Rasch Analysis of a Psychological Test with Multiple Subtests: A Statistical Solution for the Bandwidth-Fidelity Dilemma

    ERIC Educational Resources Information Center

    Cheng, Ying-Yao; Wang, Wen-Chung; Ho, Yi-Hui

    2009-01-01

    Educational and psychological tests are often composed of multiple short subtests, each measuring a distinct latent trait. Unfortunately, short subtests suffer from low measurement precision, which makes the bandwidth-fidelity dilemma inevitable. In this study, the authors demonstrate how a multidimensional Rasch analysis can be employed to take…

  19. Polyelectrolyte Solutions

    NASA Astrophysics Data System (ADS)

    Colby, Ralph H.

    2008-03-01

    Pierre-Gilles de Gennes once described polyelectrolytes as the ``least understood form of condensed matter''. In this talk, I will describe the state of the polyelectrolyte field before and after de Gennes' seminal contributions published 1976-1980. De Gennes clearly explained why electrostatic interactions only stretch the polyelectrolyte chains on intermediate scales in semidilute solution (between the electrostatic blob size and the correlation length) and why the scattering function has a peak corresponding to the correlation length (the distance to the next chain). Despite many other ideas being suggested since then, the simple de Gennes scaling picture of polyelectrolyte conformation in solution has stood the test of time. How that model is used today, including consequences for dynamics in polyelectrolyte solutions, and what questions remain, will clarify the importance of de Gennes' ideas.

  20. Fiber Attachment Module Experiment (FAME): Using a Multiplexed Miniature Hollow Fiber Membrane Bioreactor Solution for Rapid Process Testing

    NASA Astrophysics Data System (ADS)

    Lunn, Griffin; Wheeler, Raymond; Hummerick, Mary; Birmele, Michele; Richards, Jeffrey; Coutts, Janelle; Koss, Lawrence; Spencer, Lashelle.; Johnsey, Marissa; Ellis, Ronald

    Bioreactor research, even today, is mostly limited to continuous stirred-tank reactors (CSTRs). These are not an option for microgravity applications due to the lack of a gravity gradient to drive aeration as described by the Archimedes principle. This has led to testing of Hollow Fiber Membrane Bioreactors (HFMBs) for microgravity applications, including possible use for wastewater treatment systems for the International Space Station (ISS). Bioreactors and filtration systems for treating wastewater could avoid the need for harsh pretreatment chemicals and improve overall water recovery. However, the construction of these reactors is difficult and commercial off-the-shelf (COTS) versions do not exist in small sizes. We have used 1-L modular HFMBs in the past, but the need to perform rapid testing has led us to consider even smaller systems. To address this, we designed and built 125-mL, rectangular reactors, which we have called the Fiber Attachment Module Experiment (FAME) system. A polycarbonate rack of four square modules was developed with each module containing removable hollow fibers. Each FAME reactor is self-contained and can be easily plumbed with peristaltic and syringe pumps for continuous recycling of fluids and feeding, as well as fitted with sensors for monitoring pH, dissolved oxygen, and gas measurements similar to their larger counterparts. The first application tested in the FAME racks allowed analysis of over a dozen fiber surface treatments and three inoculation sources to achieve rapid reactor startup and biofilm attachment (based on carbon oxidation and nitrification of wastewater). With these miniature FAME reactors, data for this multi-factorial test were collected in duplicate over a six-month period; this greatly compressed time period required for gathering data needed to study and improve bioreactor performance.

  1. In Vitro Cytotoxicity Test and Surface Characterization of CoCrW Alloy in Artificial Saliva Solution for Dental Applications.

    PubMed

    Souza, Klester Santos; Jaimes, Ruth Flavia Vera Villamil; Rogero, Sizue Otta; Nascente, Pedro Augusto de Paula; Agostinho, Silvia Maria Leite

    2016-01-01

    In order to evaluate its application as a dental prosthesis material, a CoCrW alloy was subjected to in vitro cytotoxicity test, surface characterization and electrochemical studies performed in artificial saliva and 0.15 mol.L-1 NaCl medium. The used techniques were: anodic polarization curves, chronoamperometric measurements, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) analysis and X-ray photoelectron spectroscopy (XPS). Cytotoxicity test was also performed. The electrochemical behavior of CoCrW alloy was compared in both studied media, from corrosion potential (Ecorr) to a 600 mV anodic overvoltage. From the electrochemical measurements it was observed that the CoCrW alloy in both media presents only generalized corrosion. SEM and EDS analysis showed that the alloy presents carbide niobium and silicon and manganese oxides as nonmetallic inclusions. XPS results indicated that cobalt does not significantly contribute to the passivating film formation. Cytotoxicity test showed no cytotoxic character of CoCrW alloy. These results suggest that the CoCrW alloy can be used as biomaterial to be applied as prosthesis in dental implants. PMID:27058381

  2. Results of Hg speciation testing on MCU strip effluent hold tank (SEHT) and decontaminated salt solution hold tank (DSSHT) materials

    SciTech Connect

    Bannochie, C. J.

    2015-09-17

    The Savannah River National Laboratory (SRNL) was tasked with preparing and shipping samples for Hg speciation by Eurofins Frontier Global Sciences, Inc. in Seattle, WA on behalf of the Savannah River Remediation (SRR) Mercury Task Team.i,ii The tenth shipment of samples was designated to include Modular Caustic Side Solvent Extraction Unit (MCU) Strip Effluent Hold Tank (SEHT) and MCU Decontaminated Salt Solution Hold Tank (DSSHT) materials from processing Salt Batch 7b. The MCU SEHT (MCU-15-722) and DSSHT (MCU-15-709) samples were pulled on June 15, 2015. All MCU samples were received at SRNL on June 16, 2015. The DSSHT sample was moved the same day to refrigeration, while the SEHT sample was placed in the Shielded Cells. On July 9, 2015 it was opened and an aliquot diluted 1:100 with Eurofins deionized water and a portion of the diluted sample transferred to a Teflon® bottle prior to moving it to refrigeration that same day. All samples were kept in the dark and refrigerated until final dilutions were prepared for shipment to Eurofins.

  3. Polycrystalline lead iodide films produced by solution evaporation and tested in the mammography X-ray energy range

    NASA Astrophysics Data System (ADS)

    Condeles, J. F.; Mulato, M.

    2016-02-01

    Lead iodide polycrystalline films have been deposited on corning glass substrates using solution evaporation in oven. Films 6 μm-thick were obtained with full coverage of the substrates as verified by scanning electron microscopy. Some pin-holes were observable. X-ray diffraction revealed a crystalline structure corresponding to the 4 H-PbI2 polytype formation. Polarized Raman scattering experiments indicated a lamellar structure. Anisotropy was also investigated using depolarization ratio calculations. The optical and electrical properties of the samples were investigated using photoluminescence and dark conductivity as a function of temperature, respectively. Activation energies of 0.10 up to 0.89 eV were related to two main electrical transport mechanisms. Films were also exposed to X-ray irradiation in the mammography X-ray energy range. The detector produced was also exposed to X-ray from 5 mR up to 1450 mR. A linear response was observed as a function of dose with a slope of 0.52 nA/mm2 per mR.

  4. Modern technical solutions of gas-fired heating devices of household and communal use and analysis of their testing

    SciTech Connect

    Bodzon, L.; Radwan, W.

    1995-12-31

    A review of technical solutions for gas-fired heating devices for household and communal use in Poland is presented. Based upon the analysis it is stated that the power output of Polish and foreign boilers ranges between 9 and 35 kW. The carbon monoxide content in flue gases reaches (on average) 0.005 vol.%, i.e., it is much lower than the maximum permissible level. Temperature of flue gases (excluding condensation boilers and those with air-tight combustion chamber) ranges between 150 and 200{degrees}C and their heating efficiency reaches 87-93%. The best parameters are given for condensation boilers, however they are still not widespread in Poland for the high cost of the equipment and assembling works. Among the heaters, the most safe are convection devices with closed combustion chamber; their efficiency is also the highest. Thus, it is concluded that a wide spectrum of high efficiency heating devices with good combustion parameters are available. The range of output is sufficient to meet household and communal requirement. They are however - predominantly - units manufactured abroad. It is difficult to formulate the program aimed at the improvement of the technique of heating devices made in Poland, and its implementation is uncertain because the production process is broken up into small handicraft workshops.

  5. A new combination of protecting groups and links for encoded synthetic libraries suited for consecutive tests on the solid phase and in solution.

    PubMed

    Felder, E R; Heizmann, G; Matthews, I T; Rink, H; Spieser, E

    1996-02-01

    A strategy for high-throughput evaluation of combinatorial compound libraries is reported, which circumvents the necessity to test complex mixtures. The method is based on a new combination of protecting groups, solid-phase linker and tags. The bulk of the library first undergoes a binding assay with the components grafted on beads. A selection of beads carrying strong ligands is stripped from the labelled target and distributed into microvessels. The ligands are cleaved and rinsed into microeluates. Subsequently, a more detailed characterization with a functional assay in solution determines the best performers, which are identified through the peptidic tag left behind on the corresponding mother bead. PMID:9237199

  6. Theoretical and experimental determination of matrix diffusion and related solute transport properties of fractured tuffs from the Nevada Test Site

    SciTech Connect

    Walter, G.R.

    1982-10-01

    Theoretical and experimental studies of the chemical and physical factors which affect molecular diffusion of dissolved substances from fractures into a tuffaceous rock matrix have been made on rocks from G-Tunnel and Yucca Mountain at the Nevada Test Site (NTS). A variety of groundwater tracers, which may be useful in field tests at the NTS, have also been developed and tested. Although a number of physical/chemical processes may cause nonconvective transport of dissolved species from fractures into the tuff matrix, molecular diffusion seems to be the most important process. Molecular diffusion in these rocks is controlled by the composition of the groundwater through multicomponent effects and several rock properties. The porosities of the samples studied ranged from about 0.1 to 0.4. The constrictivity-tortuosity parameter ranged from 0.1 and 0.3 and effective matrix-diffusion coefficients were measured to be between 2 to 17. x 10{sup -7} c,{sup 2}/s for sodium halides and sodium pentafluorobenzoate. Total porosity was found to be the principle factor accounting for the variation in effective diffusion coefficients. The constrictivity-tortuosity factor was found to have a fair correlation (r = 0.75) with the median pore diameters measured by mercury intrusion. Measurements of bulk-rock electrical impedance changes with frequency indicate that the constrictivity factor has a maximum value of 0.8 to 1, but may be smaller. If the larger values are correct, then the diffusion paths in tuff are more tortuous than in granular media. Computation of the full diffusion-coefficient matrix for various tracers in J-13 well water from the NTS indicates coupling of the diffusion fluxes of all ionic species. These effects are being incorporated into a numerical model of multicomponent-matrix diffusion.

  7. A clearing house for diagnostic testing: the solution to ensure access to and use of patented genetic inventions?

    PubMed Central

    van Zimmeren, Esther; Verbeure, Birgit; Matthijs, Gert; Van Overwalle, Geertrui

    2006-01-01

    In genetic diagnostics, the emergence of a so-called "patent thicket" is imminent. Such an overlapping set of patent rights may have restrictive effects on further research and development of diagnostic tests, and the provision of clinical diagnostic services. Currently, two models that may facilitate access to and use of patented genetic inventions are attracting much debate in various national and international fora: patent pools and clearing houses. In this article, we explore the concept of clearing houses. Several types of clearing houses are identified. First, we describe and discuss two types that would provide access to information on the patented inventions: the information clearing house and the technology exchange clearing house. Second, three types of clearing houses are analysed that not only offer access to information but also provide an instrument to facilitate the use of the patented inventions: the open access clearing house, the standardized licences clearing house and the royalty collection clearing house. A royalty collection clearing house for genetic diagnostic testing would be the most comprehensive as it would serve several functions: identifying patents and patent claims essential to diagnostic testing, matching licensees with licensors, developing and supplying standardized licences, collecting royalties, monitoring whether users respect licensing conditions, and providing dispute resolution services such as mediation and arbitration. In this way, it might function as an effective model for users to facilitate access to and use of the patented inventions. However, it remains to be seen whether patent holders with a strong patent portfolio will be convinced by the advantages of the royalty collection clearing house and be willing to participate. PMID:16710543

  8. Impact of assay selection and study design on the outcome of cytotoxicity testing of medical devices: the case of multi-purpose vision care solutions.

    PubMed

    Lehmann, David M; Richardson, Mary E

    2010-06-01

    Medical device biocompatibility testing usually includes a cytotoxicity component. Assay selection and protocol design often depend on a specific testing standard rather than on the characteristics of the medical device. To better understand the impact of assay selection on study outcome of unstructured medical devices, we evaluated contact lens multi-purpose solutions (MPS) in the agar diffusion, direct contact and two elution cytotoxicity assays. To simulate the conditions of use, MPS were evaluated alone and in combination with contact lenses. All MPS passed the agar diffusion assay (n=3) and extracts prepared from contact lenses soaked in MPS passed the USP elution assay (n=3). Both the duration of contact and MPS concentration impacted the outcome of a modified elution assay. When tested at 25% strength for 48 h, all MPS evaluated were non-cytotoxic (n>3). Test article movement and mechanical damage were significant issues with the direct contact assay. Movement was effectively controlled by manipulating contact lens orientation while using 0.8 mL culture medium. All MPS passed the USP direct contact cytotoxicity test when evaluated using this optimized methodology (n=3). These data are consistent with MPS results in ocular irritation studies in rabbits (n=3).

  9. /sup 237/Np and /sup 239/Pu solution behavior during hydrothermal testing of simulated nuclear waste glass with basalt and steel

    SciTech Connect

    Schramke, J.A.; Simonson, S.A.; Coles, D.G.

    1984-09-01

    A series of hydrothermal experiments were carried out on /sup 237/Np- and /sup 239/Pu-doped PNL 76-68 glass, synthetic basalt groundwater, basalt, and cast steel. Experiments of duration were conducted in Dickson-type rocking autoclaves at 200/sup 0/C and 30 MPa, with an initial fluid to solid weight ratio of 10:1. The tests carried out were: glass and groundwater; glass, basalt, and groundwater; glass, steel, and groundwater; and glass, steel, basalt, and groundwater. Unfiltered, 4000 A filtered, and 18 A filtered solutions were analyzed to determine the concentrations of radionuclides in solution and those associated with colloids. In all four experiments, /sup 237/Np and /sup 239/Pu were present in solution in quantities at or below the analytical detection limits. The only detectable differences in radionuclide concentrations between the four experiments were brought about by changes in the amounts of colloidally associated radionuclides. Besalt added to the glass and groundwater system increased the quantities of the colloidally associated /sup 237/Np and /sup 239/Pu by an order of magnitude. The addition of steel to the glass and groundwater system reduced the colloidally associated radionuclides to levels below detection limits. The effects of both steel and basalt on the glass and groundwater system seemed to cancel out, and the colloidally associated radionuclide concentrations were similar to the observed levels in the glass plus groundwater system. These variations in the quantities of the colloidally associated radionuclides did not appear to be correlated with other changes in the quantities or composition of the colloidal material in solution. Other than /sup 237/Np and /sup 239/Pu, silica was the only constituent of the colloids in these experiments. The amounts of colloidal silica did not vary significantly between the four experiments. 7 references, 7 figures.

  10. Structure of bottle-brush polymers in solution: A Monte Carlo test of models for the scattering function

    NASA Astrophysics Data System (ADS)

    Hsu, Hsiao-Ping; Paul, Wolfgang; Binder, Kurt

    2008-11-01

    Extensive Monte Carlo results are presented for the structure of a bottle-brush polymer under good solvent or theta solvent conditions. Varying the side chain length, backbone length, and the grafting density for a rigid straight backbone, both radial density profiles of monomers and side chain ends are obtained as well as structure factors describing the scattering from a single side chain and from the total bottle-brush polymer. To describe the structure in the interior of a very long bottle brush, a periodic boundary condition in the direction along the backbone is used, and to describe effects due to the finiteness of the backbone length, a second set of simulations with free ends of the backbone is performed. In the latter case, the inhomogeneity of the structure in the direction along the backbone is carefully investigated. We use these results to test various phenomenological models that have been proposed to interpret experimental scattering data for bottle-brush macromolecules. These models aim to extract information on the radial density profile of a bottle brush from the total scattering via suitable convolution approximations. Limitations of this approach and the optimal way to perform the analysis of the scattering data within this approach are discussed.

  11. Line formation in the inner winds of classical T Tauri stars: testing the conical-shell wind solution

    NASA Astrophysics Data System (ADS)

    Kurosawa, Ryuichi; Romanova, M. M.

    2012-11-01

    We present the emission-line profile models of hydrogen and helium based on the results from axisymmetric magnetohydrodynamics (MHD) simulations of the wind formed near the disc-magnetosphere boundary of classical T Tauri stars (CTTSs). We extend the previous outflow models of 'the conical-shell wind' by Romanova et al. to include a well-defined magnetospheric accretion funnel flow which is essential for modelling the optical and near-infrared hydrogen and helium lines of CTTSs. The MHD model with an intermediate mass-accretion rate shows outflows in conical-shell shape with a half opening angle ˜35°. The flow properties such as the maximum outflow speed in the conical-shell wind, maximum inflow speed in the accretion funnel, mass accretion and mass-loss rates are comparable to those found in a typical CTTS. The density, velocity and modified temperature from the MHD simulations are used in a separate radiative transfer model to predict the line profiles and test the consistency of the MHD models with observations. The line profiles are computed with various combinations of X-ray luminosities, temperatures of X-ray-emitting plasma and inclination angles. A rich diversity of line profile morphology is found, and many of the model profiles are very similar to those found in observations. We find that the conical-shell wind may contribute to the emission in some hydrogen lines (e.g. Hα, Hβ, Paβ and Paγ) significantly when the temperature in the wind is relatively high (e.g. ˜104 K); however, the wind contribution decreases rapidly when a lower wind temperature is adopted. The model well reproduces a relatively narrow and low-velocity blueshifted absorption component in He I λ10830, which are often seen in observations.

  12. Positive lymphocyte transformation test in a patient with allergic contact dermatitis of the scalp after short-term use of topical minoxidil solution.

    PubMed

    Hagemann, Tobias; Schlütter-Böhmer, Brigitte; Allam, Jean-Pierre; Bieber, Thomas; Novak, Natalija

    2005-07-01

    Topical 2,4-diamino-6-piperidinopyrimidine-3-oxide (minoxidil) solution has been widely used for the treatment of androgenetic alopecia for over 15 years now and the substance is currently approved for this indication in 2% and 5% formulation. Typical side effects of this topical treatment include irritative dermatitis going along with pruritus, erythema, scaling and dryness, which occur especially at the onset of the therapy. In some cases, allergic contact dermatitis or exacerbation of seborrheic dermatitis has been reported. While most of the patients with allergic contact dermatitis described in the literature showed a positive sensitization to the vehicle substance propylene glycol evaluated by patch testing, reactions to the active ingredient minoxidil are rare. Here, we report a case of allergic sensitization to minoxidil, which we evaluated and differentiated from an irritative reaction by a combination of patch testing and lymphocyte transformation test. The differentiation of allergic and irritative adverse effects and the identification of the causative allergen are of major relevance for the proceeding and adjustment of the therapy. Patients with sensitizations against propylene glycol are candidates for preparations with alternative solvents but can proceed treatment with minoxidil. In contrast, patients with allergies to the active ingredient itself are no longer candidates for treatment with minoxidil and should undergo alternative therapeutic options. PMID:15982234

  13. 100-NR-2 Apatite Treatability Test: High-Concentration Calcium-Citrate-Phosphate Solution Injection for In Situ Strontium-90 Immobilization

    SciTech Connect

    Vermeul, Vincent R.; Fritz, Brad G.; Fruchter, Jonathan S.; Szecsody, James E.; Williams, Mark D.

    2010-09-01

    Following an evaluation of potential strontium-90 (90Sr) treatment technologies and their applicability under 100-NR-2 hydrogeologic conditions, the U.S. Department of Energy (DOE), Fluor Hanford, Inc. (now CH2M Hill Plateau Remediation Company [CHPRC]), Pacific Northwest National Laboratory, and the Washington State Department of Ecology agreed that the long-term strategy for groundwater remediation at the 100-N Area should include apatite as the primary treatment technology. This agreement was based on results from an evaluation of remedial alternatives that identified the apatite permeable reactive barrier (PRB) technology as the approach showing the greatest promise for reducing 90Sr flux to the Columbia River at a reasonable cost. This letter report documents work completed to date on development of a high-concentration amendment formulation and initial field-scale testing of this amendment solution.

  14. Development and testing of FIDELE: a computer code for finite-difference solution to harmonic magnetic-dipole excitation of an azimuthally symmetric horizontally and radially layered earth

    SciTech Connect

    Vittitoe, C.N.

    1981-04-01

    The FORTRAN IV computer code FIDELE simulates the high-frequency electrical logging of a well in which induction and receiving coils are mounted in an instrument sonde immersed in a drilling fluid. The fluid invades layers of surrounding rock in an azimuthally symmetric pattern, superimposing radial layering upon the horizonally layered earth. Maxwell's equations are reduced to a second-order elliptic differential equation for the azimuthal electric-field intensity. The equation is solved at each spatial position where the complex dielectric constant, magnetic permeability, and electrical conductivity have been assigned. Receiver response is given as the complex open-circuit voltage on receiver coils. The logging operation is simulated by a succession of such solutions as the sonde traverses the borehole. Test problems verify consistency with available results for simple geometries. The code's main advantage is its treatment of a two-dimensional earth; its chief disadvantage is the large computer time required for typical problems. Possible code improvements are noted. Use of the computer code is outlined, and tests of most code features are presented.

  15. Interim Report: 100-NR-2 Apatite Treatability Test: Low Concentration Calcium Citrate-Phosphate Solution Injection for In Situ Strontium-90 Immobilization

    SciTech Connect

    Williams, Mark D.; Fritz, Brad G.; Mendoza, Donaldo P.; Rockhold, Mark L.; Thorne, Paul D.; Xie, YuLong; Bjornstad, Bruce N.; Mackley, Rob D.; Newcomer, Darrell R.; Szecsody, James E.; Vermeul, Vincent R.

    2008-07-11

    Following an evaluation of potential Sr-90 treatment technologies and their applicability under 100-NR-2 hydrogeologic conditions, U.S. Department of Energy, Fluor Hanford, Inc., Pacific Northwest National Laboratory, and the Washington Department of Ecology agreed that the long-term strategy for groundwater remediation at 100-N Area will include apatite sequestration as the primary treatment, followed by a secondary treatment if necessary (most likely phytoremediation). Since then, the agencies have worked together to agree on which apatite sequestration technology has the greatest chance of reducing Sr-90 flux to the river at a reasonable cost. In July 2005, aqueous injection, (i.e., the introduction of apatite-forming chemicals into the subsurface) was endorsed as the interim remedy and selected for field testing. Studies are in progress to assess the efficacy of in situ apatite formation by aqueous solution injection to address both the vadose zone and the shallow aquifer along the 300 ft of shoreline where Sr-90 concentrations are highest. This report describes the field testing of the shallow aquifer treatment.

  16. Guar gum solutions for improved delivery of iron particles in porous media (part 2): iron transport tests and modeling in radial geometry.

    PubMed

    Tosco, Tiziana; Gastone, Francesca; Sethi, Rajandrea

    2014-10-01

    In the present work column transport tests were performed in order to study the mobility of guar-gum suspensions of microscale zero-valent iron particles (MZVI) in porous media. The results were analyzed with the purpose of implementing a radial model for the design of full scale interventions. The transport tests were performed using several concentrations of shear thinning guar gum solutions as stabilizer (1.5, 3 and 4g/l) and applying different flow rates (Darcy velocity in the range 1·10(-4) to 2·10(-3)m/s), representative of different distances from the injection point in the radial domain. Empirical relationships, expressing the dependence of the deposition and release parameters on the flow velocity, were derived by inverse fitting of the column transport tests using a modified version of E-MNM1D (Tosco and Sethi, 2010) and the user interface MNMs (www.polito.it/groundwater/software). They were used to develop a comprehensive transport model of MZVI suspensions in radial coordinates, called E-MNM1R, which takes into account the non Newtonian (shear thinning) rheological properties of the dispersant fluid and the porous medium clogging associated with filtration and sedimentation in the porous medium of both MZVI and guar gum residual undissolved particles. The radial model was run in forward mode to simulate the injection of MZVI dispersed in guar gum in conditions similar to those applied in the column transport tests. In a second stage, we demonstrated how the model can be used as a valid tool for the design and the optimization of a full scale intervention. The simulation results indicated that several concurrent aspects are to be taken into account for the design of a successful delivery of MZVI/guar gum slurries via permeation injection, and a compromise is necessary between maximizing the radius of influence of the injection and minimizing the injection pressure, to guarantee a sufficiently homogeneous distribution of the particles around the

  17. Colorimetric and fluorimetric response of Schiff base molecules towards fluoride anion, solution test kit fabrication, logical interpretations and DFT-D3 study.

    PubMed

    Ghosh, Pritam; Roy, Biswajit Gopal; Jana, Saibal; Mukhopadhyay, Subhra Kanti; Banerjee, Priyabrata

    2015-08-21

    Two newly synthesized Schiff base molecules are herein reported as anion sensors. -NO2 substituted receptor (P1) is comparatively more acidic and can sense F(-), OAc(-) and H2PO4(-), whereas -CN substituted receptor (P2) is less acidic and is selective for F(-) only. Reversible UV-Vis response for both receptors with F(-) can mimic multiple logic gate functions, and several complex electronic circuits based on XNOR, XOR, OR, AND, NOT and NOR logic operations with 'Write-Read-Erase-Read' options have been executed. Interesting 'turn on and off' fluorescence responses were noticed for the receptors with F(-). Intracellular F(-) detection as a diagnosis of non-skeletal fluorosis was successful using a fluorescence microscope with Candida albicans (prokaryotic cell, a diploid fungus) and pollen grains of Tecoma stans (eukaryotic cell) incubated in 10(-6) M fluoride-contaminated hand-pump water collected from Bankura, West Bengal, India. Furthermore, a solution test kit was fabricated for easy and selective detection of F(-) in an aqueous solvent. PMID:26190641

  18. Effective shelf-life of prepared sodium hypochlorite solution.

    PubMed

    Johnson, B R; Remeikis, N A

    1993-01-01

    Although the tissue solvent and bactericidal properties of sodium hypochlorite are well known, the effective shelf-life of prepared sodium hypochlorite solutions is not known. The stability of sodium hypochlorite is adversely affected by exposure to high temperature, light, air, and the presence of organic and inorganic contaminants. The purpose of this study was to investigate the variables of storage conditions and time on the tissue-dissolving capacity of three different concentrations of sodium hypochlorite. Fresh frozen human umbilical cord was used as the tissue sample for this experiment. Tissue samples were dissolved at time intervals ranging from 1 day to 10 wk in 5.25%, 2.62%, and 1.0% solutions of sodium hypochlorite. The tissue-dissolving ability of 5.25% sodium hypochlorite remains stable for at least 10 wk. The tissue-dissolving ability of 2.62% and 1.0% sodium hypochlorite remains relatively stable for 1 wk after mixing, then exhibits a significant decrease in tissue-dissolving ability at 2 wk and beyond.

  19. Use of the Oslo-Potsdam Solution to test the effect of an environmental education model on tangible measures of environmental protection

    NASA Astrophysics Data System (ADS)

    Short, Philip Craig

    The fundamental goals of environmental education include the creation of an environmentally literate citizenry possessing the knowledge, skills, and motivation to objectively analyze environmental issues and engage in responsible behaviors leading to issue resolution and improved or maintained environmental quality. No existing research, however, has linked educational practices and environmental protection. In an original attempt to quantify the pedagogy - environmental protection relationship, both qualitative and quantitative methods were used to investigate local environmental records and environmental quality indices that reflected the results of student actions. The data were analyzed using an educational adaptation of the "Oslo-Potsdam Solution for International Environmental Regime Effectiveness." The new model, termed the Environmental Education Performance Indicator (EEPI), was developed and evaluated as a quantitative tool for testing and fairly comparing the efficacy of student-initiated environmental projects in terms of environmental quality measures. Five case studies were developed from descriptions of student actions and environmental impacts as revealed by surveys and interviews with environmental education teachers using the IEEIA (Investigating and Evaluating Environmental Issues and Actions) curriculum, former students, community members, and agency officials. Archival information was also used to triangulate the data. In addition to evaluating case study data on the basis of the EEPI model, an expert panel of evaluators consisting of professionals from environmental education, natural sciences, environmental policy, and environmental advocacy provided subjective assessments on the effectiveness of each case study. The results from this study suggest that environmental education interventions can equip and empower students to act on their own conclusions in a manner that leads to improved or maintained environmental conditions. The EEPI model

  20. Enhancement of fluorescence development of end products by use of a fluorescence developer solution in a rapid and sensitive fluorescent spot test for specific detection of microbial beta-lactamases.

    PubMed

    Chen, K C; Holmes, K K

    1986-03-01

    A fluorescent spot test method for specific detection of microbial beta-lactamases as previously published (K. C. S. Chen, J. S. Knapp, and K. K. Holmes, J. Clin. Microbiol. 19:818-825, 1984) was improved by the use of a fluorescence developer solution. The fluorescence developer solution used in this study consisted of 0.78 M sodium tartrate buffer containing 12% formaldehyde at a final pH of 4.5. An addition of 1 volume of fluorescence developer solution to 5 volumes of ampicillin or cephalex substrate solution incubated with beta-lactamase-producing organisms, followed by heating the mixture at 45 degrees C for 10 min resulted in enhancement of fluorescence of the end products of beta-lactamase activity. This provides a more sensitive assay for microbial beta-lactamases and offers the potential for direct detection of beta-lactamases in clinical specimens.

  1. Testing the application of Teflon/quartz soil solution samplers for DOM sampling in the Critical Zone: Field and laboratory approaches

    NASA Astrophysics Data System (ADS)

    Dolan, E. M.; Perdrial, J. N.; Vazquez, A.; Hernández, S.; Chorover, J.

    2010-12-01

    Elizabeth Dolan1,2, Julia Perdrial3, Angélica Vázquez-Ortega3, Selene Hernández-Ruiz3, Jon Chorover3 1Deptartment of Soil, Environmental, and Atmospheric Science, University of Missouri. 2Biosphere 2, University of Arizona. 3Deptartment of Soil, Water, and Environmental Science, University of Arizona. Abstract: The behavior of dissolved organic matter (DOM) in soil is important to many biogeochemical processes. Extraction methods to obtain DOM from the unsaturated zone remain a current focus of research as different methods can influence the type and concentration of DOM obtained. Thus, the present comparison study involves three methods for soil solution sampling to assess their impact on DOM quantity and quality: 1) aqueous soil extracts, 2) solution yielded from laboratory installed suction cup samplers and 3) solutions from field installed suction cup samplers. All samples were analyzed for dissolved organic carbon and total nitrogen concentrations. Moreover, DOM quality was analyzed using fluorescence, UV-Vis and FTIR spectroscopies. Results indicate higher DOC values for laboratory extracted DOM: 20 mg/L for aqueous soil extracts and 31 mg/L for lab installed samplers compared to 12 mg/L for field installed samplers. Large variations in C/N ratios were also observed ranging from 1.5 in laboratory extracted DOM to 11 in field samples. Fluorescence excitation-emission matrices of DOM solutions obtained for the laboratory extraction methods showed higher intensities in regions typical for fulvic and humic acid-like materials relative to those extracted in the field. Similarly, the molar absorptivity calculated from DOC concentration normalization of UV-Vis absorbance of the laboratory-derived solutions was significantly higher as well, indicating greater aromaticity. The observed differences can be attributed to soil disturbance associated with obtaining laboratory derived solution samples. Our results indicate that laboratory extraction methods are not

  2. S Solution

    NASA Astrophysics Data System (ADS)

    Dezhi, Zeng; Gang, Tian; Junying, Hu; Zhi, Zhang; Taihe, Shi; Wanying, Liu; Qiang, Lu; Shaobo, Feng

    2014-11-01

    During drilling process, if oil and gas overflow containing H2S enters drilling fluids, the performance of drill pipes will decline significantly within a short time. In this paper, S135 drill pipe specimen was immersed in the saturated solution of H2S at room temperature for 6, 12, 18, and 24 h, respectively. The tensile properties and impact properties of S135 drill pipe were determined before and after immersion for comparison. In addition, the S135 specimens were immersed for 3 days at 80 °C to determine the changes in fatigue performance. The test results indicated that the yield strength of S135 material fluctuated with immersion time increasing and the tensile strength slightly varied with immersion time. But the plasticity index of S135 decreased significantly with the increase in immersion time. The impact energy of S135 steel also fluctuated with the increase in immersion time. After 3-day immersion at 80 °C, the fatigue properties of S135 steel decreased, and fatigue life showed the one order of magnitude difference under the same stress conditions. Moreover, fatigue strength was also decreased by about 10%. The study can guide security management of S135 drill pipe under the working conditions with oil and gas overflow containing H2S, reduce drilling tool failures, and provide technical support for drilling safety.

  3. Electromarking solution

    DOEpatents

    Bullock, Jonathan S.; Harper, William L.; Peck, Charles G.

    1976-06-22

    This invention is directed to an aqueous halogen-free electromarking solution which possesses the capacity for marking a broad spectrum of metals and alloys selected from different classes. The aqueous solution comprises basically the nitrate salt of an amphoteric metal, a chelating agent, and a corrosion-inhibiting agent.

  4. Solute transport in heterogeneous karst systems: Dimensioning and estimation of the transport parameters via multi-sampling tracer-tests modelling using the OTIS (One-dimensional Transport with Inflow and Storage) program

    NASA Astrophysics Data System (ADS)

    Dewaide, Lorraine; Bonniver, Isabelle; Rochez, Gaëtan; Hallet, Vincent

    2016-03-01

    This paper presents the modelling results of several tracer-tests performed in the cave system of Han-sur-Lesse (South Belgium). In Han-sur-Lesse, solute flows along accessible underground river stretches and through flooded areas that are rather unknown in terms of geometry. This paper focus on the impact of those flooded areas on solute transport and their dimensioning. The program used (One-dimensional Transport with Inflow and Storage: OTIS) is based on the two-region non equilibrium model that supposes the existence of an immobile water zone along the main flow zone in which solute can be caught. The simulations aim to replicate experimental breakthrough curves (BTCs) by adapting the main transport and geometric parameters that govern solute transport in karst conduits. Furthermore, OTIS allows a discretization of the investigated system, which is particularly interesting in systems presenting heterogeneous geometries. Simulation results show that transient storage is a major process in flooded areas and that the crossing of these has a major effect on the BTCs shape. This influence is however rather complex and very dependent of the flooded areas geometry and transport parameters. Sensibility tests performed in this paper aim to validate the model and show the impact of the parametrization on the BTCs shape. Those tests demonstrate that transient storage is not necessarily transformed in retardation. Indeed, significant tailing effect is only observed in specific conditions (depending on the system geometry and/or the flow) that allow residence time in the storage area to be longer than restitution time. This study ends with a comparison of solute transport in river stretches and in flooded areas.

  5. The in-situ decontamination of sand and gravel aquifers by chemically enhanced solubilization of multiple-compound DNAPLs with surfactant solutions: Phase 1 -- Laboratory and pilot field-scale testing and Phase 2 -- Solubilization test and partitioning and interwell tracer tests. Final report

    SciTech Connect

    1997-10-24

    Laboratory, numerical simulation, and field studies have been conducted to assess the potential use of micellar-surfactant solutions to solubilize chlorinated solvents contaminating sand and gravel aquifers. Ninety-nine surfactants were screened for their ability to solubilize trichloroethene (TCE), perchloroethylene (PCE), and carbon tetrachloride (CTET). The field test was conducted in the alluvial aquifer which is located 20 to 30 meters beneath a vapor degreasing operation at Paducah Gaseous Diffusion Plant. This aquifer has become contaminated with TCE due to leakage of perhaps 40,000 liters of TCE, which has generated a plume of dissolved TCE extending throughout an area of approximately 3 km{sup 2} in the aquifer. Most of the TCE is believed to be present in the overlying lacustrine deposits and in the aquifer itself as a dense, non-aqueous phase liquid, or DNAPL. The objective of the field test was to assess the efficacy of the surfactant for in situ TCE solubilization. Although the test demonstrated that sorbitan monooleate was unsuitable as a solubilizer in this aquifer, the single-well test was demonstrated to be a viable method for the in situ testing of surfactants or cosolvents prior to proceeding to full-scale remediation.

  6. [Technical support in the testing of microoganisms for their ability to accumulate strontium and cesium from aqueous solutions]. Final reports, Task order No. 2

    SciTech Connect

    Not Available

    1987-06-15

    This report describes the binding of cesium and strontium ions from aqueous solution in a variety of microorganisms. Data is provided on the absorption by Ashbya gossyppi, Chlorella pyrenoidosa, Candida sp. Ml13, Saccharomyces cerevisiae, Scenedesmus obliqus, Streptococcus mutans, Anabaena flosaquae, Escherichia coli, Streptomyces viridochromogenes, Chlamydomonas reinhardtii, Rhizopus oryzae, Bacillus megaterium, Micrococcus luteus, Zoogloea ramigera, Coelastrum proboscideum, Pseudomonas aeruginosa, Citrobacter freundii, Paecilomyces marquandi, and Caulobacter fusiformis.

  7. Crystal growth of calcite from calcium bicarbonate solutions at constant PCO2 and 25°C: a test of a calcite dissolution model

    USGS Publications Warehouse

    Reddy, Michael M.; Plummer, L. Neil; Busenberg, E.

    1981-01-01

    A highly reproducible seeded growth technique was used to study calcite crystallization from calcium bicarbonate solutions at 25°C and fixed carbon dioxide partial pressures between 0.03 and 0.3 atm. The results are not consistent with empirical crystallization models that have successfully described calcite growth at low PCO2 (< 10−3 atm). Good agreement was found between observed crystallization rates and those calculated from the calcite dissolution rate law and mechanism proposed by Plummer et al. (1978).

  8. HGMF of 10-L solutions

    SciTech Connect

    Larkin, K.A.

    1994-08-14

    This test plan describes the activities associated with the High Gradient Magnetic Filtration (HGMF) of plutonium-bearing solutions (10-L). The 10-L solutions were received from Argonne National Laboratories in 1972, are highly acidic, and are considered unstable. The purpose of the testing is to show that HGMF is an applicable method of removing plutonium precipitates from solution. The plutonium then can be stored safely in a solid form.

  9. A Qualitative Analysis of Provider Barriers and Solutions to HIV Testing for Substance Users in a Small, Largely Rural Southern State

    PubMed Central

    Wright, Patricia B.; Curran, Geoffrey M.; Stewart, Katharine E.; Booth, Brenda M.

    2013-01-01

    Purpose Integrating HIV testing programs into substance use treatment is a promising avenue to help increase access to HIV testing for rural drug users. Yet few outpatient substance abuse treatment facilities in the United States provide HIV testing. The purpose of this study was to identify barriers to incorporating HIV testing with substance use treatment from the perspectives of treatment and testing providers in Arkansas. Methods We used purposive sampling from state directories to recruit providers at state, organization, and individual levels to participate in this exploratory study. Using an interview guide, the first and second authors conducted semi-structured individual interviews in each provider’s office or by telephone. All interviews were recorded, transcribed verbatim, and entered into ATLAS.ti software (ATLAS.ti Scientific Sofware Development GmbH, Berlin, Germany). We used constant comparison and content analysis techniques to identify codes, categories, and primary patterns in the data. Findings The sample consisted of 28 providers throughout the state, 18 from the substance use system and 10 from the public/ community health system. We identified 7 categories of barriers: environmental constraints, policy constraints, funding constraints, organizational structure, limited inter- and intra-agency communication, burden of responsibility, and client fragility. Conclusions This study presents the practice-based realities of barriers to integrating HIV testing with substance use treatment in a small, largely rural state. Some system and/or organization leaders were either unaware of or not actively pursuing external funds available to them specifically for engaging substance users in HIV testing. However, funding does not address the system-level need for coordination of resources and services at the state level. PMID:24088216

  10. Testing of the GROMOS Force-Field Parameter Set 54A8: Structural Properties of Electrolyte Solutions, Lipid Bilayers, and Proteins.

    PubMed

    Reif, Maria M; Winger, Moritz; Oostenbrink, Chris

    2013-02-12

    The GROMOS 54A8 force field [Reif et al. J. Chem. Theory Comput.2012, 8, 3705-3723] is the first of its kind to contain nonbonded parameters for charged amino acid side chains that are derived in a rigorously thermodynamic fashion, namely a calibration against single-ion hydration free energies. Considering charged moieties in solution, the most decisive signature of the GROMOS 54A8 force field in comparison to its predecessor 54A7 can probably be found in the thermodynamic equilibrium between salt-bridged ion pair formation and hydration. Possible shifts in this equilibrium might crucially affect the properties of electrolyte solutions or/and the stability of (bio)molecules. It is therefore important to investigate the consequences of the altered description of charged oligoatomic species in the GROMOS 54A8 force field. The present study focuses on examining the ability of the GROMOS 54A8 force field to accurately model the structural properties of electrolyte solutions, lipid bilayers, and proteins. It is found that (i) aqueous electrolytes involving oligoatomic species (sodium acetate, methylammonium chloride, guanidinium chloride) reproduce experimental salt activity derivatives for concentrations up to 1.0 m (1.0-molal) very well, and good agreement between simulated and experimental data is also reached for sodium acetate and methylammonium chloride at 2.0 m concentration, while not even qualitative agreement is found for sodium chloride throughout the whole range of examined concentrations, indicating a failure of the GROMOS 54A7 and 54A8 force-field parameter sets to correctly account for the balance between ion-ion and ion-water binding propensities of sodium and chloride ions; (ii) the GROMOS 54A8 force field reproduces the liquid crystalline-like phase of a hydrated DPPC bilayer at a pressure of 1 bar and a temperature of 323 K, the area per lipid being in agreement with experimental data, whereas other structural properties (volume per lipid, bilayer

  11. Testing of the GROMOS Force-Field Parameter Set 54A8: Structural Properties of Electrolyte Solutions, Lipid Bilayers, and Proteins

    PubMed Central

    2013-01-01

    The GROMOS 54A8 force field [Reif et al. J. Chem. Theory Comput.2012, 8, 3705–3723] is the first of its kind to contain nonbonded parameters for charged amino acid side chains that are derived in a rigorously thermodynamic fashion, namely a calibration against single-ion hydration free energies. Considering charged moieties in solution, the most decisive signature of the GROMOS 54A8 force field in comparison to its predecessor 54A7 can probably be found in the thermodynamic equilibrium between salt-bridged ion pair formation and hydration. Possible shifts in this equilibrium might crucially affect the properties of electrolyte solutions or/and the stability of (bio)molecules. It is therefore important to investigate the consequences of the altered description of charged oligoatomic species in the GROMOS 54A8 force field. The present study focuses on examining the ability of the GROMOS 54A8 force field to accurately model the structural properties of electrolyte solutions, lipid bilayers, and proteins. It is found that (i) aqueous electrolytes involving oligoatomic species (sodium acetate, methylammonium chloride, guanidinium chloride) reproduce experimental salt activity derivatives for concentrations up to 1.0 m (1.0-molal) very well, and good agreement between simulated and experimental data is also reached for sodium acetate and methylammonium chloride at 2.0 m concentration, while not even qualitative agreement is found for sodium chloride throughout the whole range of examined concentrations, indicating a failure of the GROMOS 54A7 and 54A8 force-field parameter sets to correctly account for the balance between ion–ion and ion–water binding propensities of sodium and chloride ions; (ii) the GROMOS 54A8 force field reproduces the liquid crystalline-like phase of a hydrated DPPC bilayer at a pressure of 1 bar and a temperature of 323 K, the area per lipid being in agreement with experimental data, whereas other structural properties (volume per lipid

  12. Sound Solutions

    ERIC Educational Resources Information Center

    Starkman, Neal

    2007-01-01

    Poor classroom acoustics are impairing students' hearing and their ability to learn. However, technology has come up with a solution: tools that focus voices in a way that minimizes intrusive ambient noise and gets to the intended receiver--not merely amplifying the sound, but also clarifying and directing it. One provider of classroom audio…

  13. Polymer solutions

    DOEpatents

    Krawczyk, Gerhard Erich; Miller, Kevin Michael

    2011-07-26

    There is provided a method of making a polymer solution comprising polymerizing one or more monomer in a solvent, wherein said monomer comprises one or more ethylenically unsaturated monomer that is a multi-functional Michael donor, and wherein said solvent comprises 40% or more by weight, based on the weight of said solvent, one or more multi-functional Michael donor.

  14. General solutions to multiple testing problems. Translation of "Sonnemann, E. (1982). Allgemeine Lösungen multipler Test probleme. EDV in Medizin und Biologie 13(4), 120-128".

    PubMed

    Sonnemann, Eckart

    2008-10-01

    The introduction of sequentially rejective multiple test procedures (Einot and Gabriel, 1975; Naik, 1975; Holm, 1977; Holm, 1979) has caused considerable progress in the theory of multiple comparisons. Emphasizing the closure of multiple tests we give a survey of the general theory and its recent results in applications. Some new applications are given including a discussion of the connection with the theory of confidence regions.

  15. New Whole-House Solutions Case Study: Testing Ductless Heat Pumps in High-Performance Affordable Housing, the Woods at Golden Given - Tacoma, Washington

    SciTech Connect

    2015-06-01

    The Woods is a 30-home, high- performance, energy efficient sustainable community built by Habitat for Humanity (HFH). With Support from Tacoma Public Utilities, Washington State University (part of the Building America Partnership for Improved Residential Construction) is researching the energy performance of these homes and the ductless heat pumps (DHP) they employ. This project provides Building America with an opportunity to: field test HVAC equipment, ventilation system air flows, building envelope tightness, lighting, appliance, and other input data that are required for preliminary Building Energy Optimization (BEopt™) modeling and ENERGY STAR® field verification; analyze cost data from HFH and other sources related to building-efficiency measures that focus on the DHP/hybrid heating system and heat recovery ventilation system; evaluate the thermal performance and cost benefit of DHP/hybrid heating systems in these homes from the perspective of homeowners; compare the space heating energy consumption of a DHP/electric resistance (ER) hybrid heating system to that of a traditional zonal ER heating system; conduct weekly "flip-flop tests" to compare space heating, temperature, and relative humidity in ER zonal heating mode to DHP/ER mode.

  16. Simulation of variable-density flow and transport of reactive and nonreactive solutes during a tracer test at Cape Cod, Massachusetts

    USGS Publications Warehouse

    Zhang, H.; Schwartz, F.W.; Wood, W.W.; Garabedian, S.P.; LeBlanc, D.R.

    1998-01-01

    A multispecies numerical code was developed to simulate flow and mass transport with kinetic adsorption in variable-density flow systems. The two-dimensional code simulated the transport of bromide (Br-), a nonreactive tracer, and lithium (Li+), a reactive tracer, in a large-scale tracer test performed in a sand-and-gravel aquifer at Cape Cod, Massachusetts. A two-fraction kinetic adsorption model was implemented to simulate the interaction of Li+ with the aquifer solids. Initial estimates for some of the transport parameters were obtained from a nonlinear least squares curve-fitting procedure, where the breakthrough curves from column experiments were matched with one-dimensional theoretical models. The numerical code successfully simulated the basic characteristics of the two plumes in the tracer test. At early times the centers of mass of Br- and Li+ sank because the two plumes were closely coupled to the density-driven velocity field. At later times the rate of downward movement in the Br- plume due to gravity slowed significantly because of dilution by dispersion. The downward movement of the Li+ plume was negligible because the two plumes moved in locally different velocity regimes, where Li+ transport was retarded relative to Br-. The maximum extent of downward transport of the Li+ plume was less than that of the Br- plume. This study also found that at early times the downward movement of a plume created by a three-dimensional source could he much more extensive than the case with a two-dimensional source having the same cross-sectional area. The observed shape of the Br- plume at Cape Cod was simulated by adding two layers with different hydraulic conductivities at shallow depth across the region. The large dispersion and asymmetrical shape of the Li+ plume were simulated by including kinetic adsorption-desorption reactions.

  17. Analysis and solution of false-positives when testing CVA16 sera using an antibody assay against the EV71 virus.

    PubMed

    Wang, Changbing; You, Aiping; Tian, Xingui; Zhao, Mingqi; Chen, Yi; Lin, Tao; Zheng, Jianbin; Xiao, Misi; Zhang, Yingying; Kuang, Lu; Zhou, Zhenwen; Zhu, Bing

    2013-09-01

    Hand, foot and mouth disease (HFMD) in humans is caused mainly by Enterovirus 71(EV71) and Coxsackievirus A16 (CVA16). EV71 is associated with severe HFMD cases but not CVA16. Use of IgM-capture enzyme-linked immunosorbent assay (ELISA) is important for the early diagnosis of EV71 infection, but cross-reactivity of the anti-CVA16 IgM antibody with EV71 produces false-positive results. In this report, we designed a new EV71 IgM-capture ELISA method using the EV71 VP1 peptide instead of the EV71 virion as the detectable antigen, and tested sera from patients infected with EV71 or CVA16. The results showed that acute sera from 76 EV71-infected patients had similar sensitivity for virus detection (98.68%) or VP1 detection (97.37%). When acute sera from patients infected with CVA16 were used, significant differences between the two methods were observed. The cross-reactivity rate of the virus detection method was 29.4% (5/17), but no cross-reactivity was observed using the VP1 detection method. Western immunoblotting demonstrated that EV71 VP3 cross-reacted with part of the CVA16 IgM antibody. The results demonstrate that EV71 VP3 is the cross-reactive antigen in the EV71 IgM-capture ELISA when testing CVA16 sera using the virus-antibody detection method. The problem of false-positive results was resolved by using the VP1 peptide as the detectable antigen.

  18. Is the Posner Reaction Time Test More Accurate Than Clinical Tests in Detecting Left Neglect in Acute and Chronic Stroke?

    PubMed Central

    Rengachary, Jennifer; d'Avossa, Giovanni; Sapir, Ayelet; Shulman, Gordon L.; Corbetta, Maurizio

    2013-01-01

    Objective To compare the accuracy of common clinical tests for left neglect with that of a computerized reaction time Posner test in a stroke population. Design Neglect measures were collected longitudinally in stroke patients at the acute (≈2wk) and chronic (≈9mo) stage. Identical measures were collected in a healthy control group. Setting Inpatient and outpatient rehabilitation. Participants Acute stroke patients (n=59) with left neglect, 30 of whom were tested longitudinally; healthy age-matched controls (n=30). Interventions Not applicable. Main Outcome Measures A receiver operating characteristic analysis, ranking the measures' sensitivity and specificity using a single summary statistic. Results Most clinical tests were adequately accurate at the acute stage, but many were near chance at the chronic stage. The Posner test was the most sensitive test at both stages, the most sensitive variable being the reaction time difference for detecting targets appearing on the left compared to the right side. Conclusions Computerized reaction time tests can be used to screen for subtle but potentially clinically relevant left neglect, which may not be detectable by conventional clinical tests, especially at the chronic stage. Such tests may be useful to assess the severity of the patients' deficits and provide more accurate measures of the degree of recovery in clinical trials than established clinical measures. PMID:19969172

  19. Various Boussinesq solitary wave solutions

    SciTech Connect

    Yates, G.T.

    1995-12-31

    The generalized Boussinesq (gB) equations have been used to model nonlinear wave evolution over variable topography and wave interactions with structures. Like the KdV equation, the gB equations support a solitary wave solution which propagates without changing shape, and this solitary wave is often used as a primary test case for numerical studies of nonlinear waves using either the gB or other model equations. Nine different approximate solutions of the generalized Boussinesq equations are presented with simple closed form expressions for the wave elevation and wave speed. Each approximates the free propagation of a single solitary wave, and eight of these solutions are newly obtained. The author compares these solutions with the well known KdV solution, Rayleigh`s solution, Laitone`s higher order solution, and ``exact`` numerical integration of the gB equations. Existing experimental data on solitary wave shape and wave speed are compared with these models.

  20. Solute transport in crystalline rocks at Aspö--II: blind predictions, inverse modelling and lessons learnt from test STT1.

    PubMed

    Jakob, Andreas; Mazurek, Martin; Heer, Walter

    2003-03-01

    Based on the results from detailed structural and petrological characterisation and on up-scaled laboratory values for sorption and diffusion, blind predictions were made for the STT1 dipole tracer test performed in the Swedish Aspö Hard Rock Laboratory. The tracers used were nonsorbing, such as uranine and tritiated water, weakly sorbing 22Na(+), 85Sr(2+), 47Ca(2+)and more strongly sorbing 86Rb(+), 133Ba(2+), 137Cs(+). Our model consists of two parts: (1) a flow part based on a 2D-streamtube formalism accounting for the natural background flow field and with an underlying homogeneous and isotropic transmissivity field and (2) a transport part in terms of the dual porosity medium approach which is linked to the flow part by the flow porosity. The calibration of the model was done using the data from one single uranine breakthrough (PDT3). The study clearly showed that matrix diffusion into a highly porous material, fault gouge, had to be included in our model evidenced by the characteristic shape of the breakthrough curve and in line with geological observations. After the disclosure of the measurements, it turned out that, in spite of the simplicity of our model, the prediction for the nonsorbing and weakly sorbing tracers was fairly good. The blind prediction for the more strongly sorbing tracers was in general less accurate. The reason for the good predictions is deemed to be the result of the choice of a model structure strongly based on geological observation. The breakthrough curves were inversely modelled to determine in situ values for the transport parameters and to draw consequences on the model structure applied. For good fits, only one additional fracture family in contact with cataclasite had to be taken into account, but no new transport mechanisms had to be invoked. The in situ values for the effective diffusion coefficient for fault gouge are a factor of 2-15 larger than the laboratory data. For cataclasite, both data sets have values comparable to

  1. Solute transport in crystalline rocks at Aspö--II: blind predictions, inverse modelling and lessons learnt from test STT1.

    PubMed

    Jakob, Andreas; Mazurek, Martin; Heer, Walter

    2003-03-01

    Based on the results from detailed structural and petrological characterisation and on up-scaled laboratory values for sorption and diffusion, blind predictions were made for the STT1 dipole tracer test performed in the Swedish Aspö Hard Rock Laboratory. The tracers used were nonsorbing, such as uranine and tritiated water, weakly sorbing 22Na(+), 85Sr(2+), 47Ca(2+)and more strongly sorbing 86Rb(+), 133Ba(2+), 137Cs(+). Our model consists of two parts: (1) a flow part based on a 2D-streamtube formalism accounting for the natural background flow field and with an underlying homogeneous and isotropic transmissivity field and (2) a transport part in terms of the dual porosity medium approach which is linked to the flow part by the flow porosity. The calibration of the model was done using the data from one single uranine breakthrough (PDT3). The study clearly showed that matrix diffusion into a highly porous material, fault gouge, had to be included in our model evidenced by the characteristic shape of the breakthrough curve and in line with geological observations. After the disclosure of the measurements, it turned out that, in spite of the simplicity of our model, the prediction for the nonsorbing and weakly sorbing tracers was fairly good. The blind prediction for the more strongly sorbing tracers was in general less accurate. The reason for the good predictions is deemed to be the result of the choice of a model structure strongly based on geological observation. The breakthrough curves were inversely modelled to determine in situ values for the transport parameters and to draw consequences on the model structure applied. For good fits, only one additional fracture family in contact with cataclasite had to be taken into account, but no new transport mechanisms had to be invoked. The in situ values for the effective diffusion coefficient for fault gouge are a factor of 2-15 larger than the laboratory data. For cataclasite, both data sets have values comparable to

  2. Comparison of the performance of microtube column systems and solid-phase systems and the tube low-ionic-strength solution additive indirect antiglobulin test in the detection of red cell alloantibodies.

    PubMed

    Weisbach, V; Kohnhäuser, T; Zimmermann, R; Ringwald, J; Strasser, E; Zingsem, J; Eckstein, R

    2006-08-01

    To compare the performance of seven currently available test systems in the detection of erythrocyte alloantibodies (ab), we tested in parallel 446 sera samples containing red cell ab [368 sera samples with ab that are assumed to be clinically significant (cs-ab) and 78 sera samples with ab that are assumed to be of minor clinical significance (ms-ab)] using the tube spin low-ionic-strength solution (addition method) indirect antiglobulin test (tube LISS-IAT), three microtube column agglutination techniques (DiaMed-ID, Ortho BioVue and Bio-Rad Scangel), one affinity adherence test system (CLB/Mast CellBind Screen) and two solid-phase tests [Biotest Solidscreen II and Immucor Capture-R Ready-Screen (4)]. To address the specificity of the three test systems under routine conditions, results of 4566 patient samples obtained using the tube LISS-IAT, results of 5205 patient samples obtained using the Scangel and results of 3560 samples obtained using the Capture-R were evaluated. The DiaMed-ID detected 344 cs-ab and 43 ms-ab, BioVue 333 cs-ab and 48 ms-ab, Scangel 348 cs-ab and 62 ms-ab, CellBind Screen 346 cs-ab and 47 ms-ab, Solidscreen 330 cs-ab and 38 ms-ab, Capture-R 358 cs-ab and 45 ms-ab and LISS-IAT 159 cs-ab and 12 ms-ab. In routine practice, erythrocyte cs-ab could be identified in 61 (67.8%) of 90 reactive sera (specificity: 98.6%) in the tube LISS-IAT, in 169 (58.7%) of 288 (94.4%) in Bio-Rad Scangel and in 101 (51.0%) of 198 reactive sera (94.3%) in Capture-R. We conclude that the sensitivity of the microcolumn, affinity adherence and solid-phase test systems in the detection of cs-ab was similar and was markedly superior to that of the conventional tube LISS-IAT. All high-sensitive test systems produced higher rates of false positives and ms-ab compared to the tube test. An individual cost-benefit analysis, considering the recent knowledge about the clinical significance of weak-reactive cs-ab, should be performed in every institution to decide whether and

  3. Solution Leaching

    NASA Astrophysics Data System (ADS)

    Chun, Tiejun; Zhu, Deqing; Pan, Jian; He, Zhen

    2014-06-01

    Recovery of alumina from magnetic separation tailings of red mud has been investigated by Na2CO3 solution leaching. X-ray diffraction (XRD) results show that most of the alumina is present as 12CaO·7Al2O3 and CaO·Al2O3 in the magnetic separation tailings. The shrinking core model was employed to describe the leaching kinetics. The results show that the calculated activation energy of 8.31 kJ/mol is characteristic for an internal diffusion-controlled process. The kinetic equation can be used to describe the leaching process. The effects of Na2CO3 concentration, liquid-to-solid ratio, and particle size on recovery of Al2O3 were examined.

  4. Life's Solution

    NASA Astrophysics Data System (ADS)

    Morris, Simon Conway

    2004-11-01

    Life's Solution builds a persuasive case for the predictability of evolutionary outcomes. The case rests on a remarkable compilation of examples of convergent evolution, in which two or more lineages have independently evolved similar structures and functions. The examples range from the aerodynamics of hovering moths and hummingbirds to the use of silk by spiders and some insects to capture prey. Going against the grain of Darwinian orthodoxy, this book is a must read for anyone grappling with the meaning of evolution and our place in the Universe. Simon Conway Morris is the Ad Hominen Professor in the Earth Science Department at the University of Cambridge and a Fellow of St. John's College and the Royal Society. His research focuses on the study of constraints on evolution, and the historical processes that lead to the emergence of complexity, especially with respect to the construction of the major animal body parts in the Cambrian explosion. Previous books include The Crucible of Creation (Getty Center for Education in the Arts, 1999) and co-author of Solnhofen (Cambridge, 1990). Hb ISBN (2003) 0-521-82704-3

  5. Life's Solution

    NASA Astrophysics Data System (ADS)

    Morris, Simon Conway

    2003-09-01

    Life's Solution builds a persuasive case for the predictability of evolutionary outcomes. The case rests on a remarkable compilation of examples of convergent evolution, in which two or more lineages have independently evolved similar structures and functions. The examples range from the aerodynamics of hovering moths and hummingbirds to the use of silk by spiders and some insects to capture prey. Going against the grain of Darwinian orthodoxy, this book is a must read for anyone grappling with the meaning of evolution and our place in the Universe. Simon Conway Morris is the Ad Hominen Professor in the Earth Science Department at the University of Cambridge and a Fellow of St. John's College and the Royal Society. His research focuses on the study of constraints on evolution, and the historical processes that lead to the emergence of complexity, especially with respect to the construction of the major animal body parts in the Cambrian explosion. Previous books include The Crucible of Creation (Getty Center for Education in the Arts, 1999) and co-author of Solnhofen (Cambridge, 1990). Hb ISBN (2003) 0-521-82704-3

  6. Alloy solution hardening with solute pairs

    DOEpatents

    Mitchell, John W.

    1976-08-24

    Solution hardened alloys are formed by using at least two solutes which form associated solute pairs in the solvent metal lattice. Copper containing equal atomic percentages of aluminum and palladium is an example.

  7. Solution nonideality related to solute molecular characteristics of amino acids.

    PubMed Central

    Keener, C R; Fullerton, G D; Cameron, I L; Xiong, J

    1995-01-01

    By measuring the freezing-point depression for dilute, aqueous solutions of all water-soluble amino acids, we test the hypothesis that nonideality in aqueous solutions is due to solute-induced water structuring near hydrophobic surfaces and solute-induced water destructuring in the dipolar electric fields generated by the solute. Nonideality is expressed with a single solute/solvent interaction parameter I, calculated from experimental measure of delta T. A related parameter, I(n), gives a method of directly relating solute characteristics to solute-induced water structuring or destructuring. I(n)-values correlate directly with hydrophobic surface area and inversely with dipolar strength. By comparing the nonideality of amino acids with progressively larger hydrophobic side chains, structuring is shown to increase with hydrophobic surface area at a rate of one perturbed water molecule per 8.8 square angstroms, implying monolayer coverage. Destructuring is attributed to dielectric realignment as described by the Debye-Hückel theory, but with a constant separation of charges in the amino-carboxyl dipole. By using dimers and trimers of glycine and alanine, this destructuring is shown to increase with increasing dipole strength using increased separation of fixed dipolar charges. The capacity to predict nonideal solution behavior on the basis of amino acid characteristics will permit prediction of free energy of transfer to water, which may help predict the energetics of folding and unfolding of proteins based on the characteristics of constituent amino acids. Images FIGURE 6 PMID:7711253

  8. Sensitivities of Soap Solutions in Leak Detection

    NASA Technical Reports Server (NTRS)

    Stuck, D.; Lam, D. Q.; Daniels, C.

    1985-01-01

    Document describes method for determining minimum leak rate to which soap-solution leak detectors sensitive. Bubbles formed at smaller leak rates than previously assumed. In addition to presenting test results, document discusses effects of joint-flange configurations, properties of soap solutions, and correlation of test results with earlier data.

  9. Thermodynamics of Dilute Solutions.

    ERIC Educational Resources Information Center

    Jancso, Gabor; Fenby, David V.

    1983-01-01

    Discusses principles and definitions related to the thermodynamics of dilute solutions. Topics considered include dilute solution, Gibbs-Duhem equation, reference systems (pure gases and gaseous mixtures, liquid mixtures, dilute solutions), real dilute solutions (focusing on solute and solvent), terminology, standard states, and reference systems.…

  10. Comparison of therapeutic effects of topical azithromycin solution and systemic doxycycline on posterior blepharitis

    PubMed Central

    Zandian, Mehdi; Rahimian, Neda; Soheilifar, Sanaz

    2016-01-01

    AIM To compare the effect of azithromycin drop and doxycycline capsule on treatment of posterior blepharitis. METHODS Fifty patients (100 eyes) with moderate posterior blepharitis, randomly divided into two therapeutic groups; all the patients got warm eyelid compress and massage three times a day for 3wk. In addition the first group got azithromycin 1% drop, twice daily for 1wk and then one drop daily for 2wk. The second group got oral doxycycline 100 mg daily for 3wk. At the end of the research, patients' signs and symptoms were compared together. ANOVA, Chi-square and Mann-Whitney tests were used for statistical analysis. RESULTS Topical therapy with azithromycin and oral therapy with doxycycline relieved signs and symptoms after 3wk. There were no significant differences between symptoms healing rate and foreign body sensation healing in these two groups (P>0.05). However, azithromycin drop was more effective in reduction of eye redness and doxycycline was more effective in meibomian glands plugging healing and reducing the corneal staining. CONCLUSION Topical azithromycin could have similar effects as oral doxycycline on posterior blepharitis in improving subjective symptoms. However, doxycycline can reduce objective signs such as ocular surface staining and meibomian gland plugging more than azithromycin. PMID:27500111

  11. Biomechanical Solutions in Tibial Malleolus Fracture

    NASA Astrophysics Data System (ADS)

    Oprisan, C.; Budescu, E.; Cotoros, V.

    This paper presents a biomechanical analysis of three solutions with implants in fracture fixation of tibial malleolus, on the mechanical strength testing. Samples were tested in mechanical traction, the forces revealed the minimum threshold from which start the phenomenon of bone destruction and maximum forces that destroyed the fractured fragments achieved by fixation elements. Experimental tests showed the best technical solution of the three, namely that consists of two Kirschner pins, cortical screws and wire tightening.

  12. Rapid Regional Centroid Solutions

    NASA Astrophysics Data System (ADS)

    Wei, S.; Zhan, Z.; Luo, Y.; Ni, S.; Chen, Y.; Helmberger, D. V.

    2009-12-01

    The 2008 Wells Nevada Earthquake was recorded by 164 broadband USArray stations within a distance of 550km (5 degrees) with all azimuths uniformly sampled. To establish the source parameters, we applied the Cut and Paste (CAP) code to all the stations to obtain a mechanism (strike/dip/rake=35/41/-85) at a depth of 9km and Mw=5.9. Surface wave shifts range from -8s to 8s which are in good agreement with ambient seismic noise (ASN) predictions. Here we use this data set to test the accuracy of the number of stations needed to obtain adequate solutions (position of the compressional and tension axis) for mechanism. The stations were chosen at random where combinations of Pnl and surface waves were used to establish mechanism and depth. If the event is bracketed by two stations, we obtain an accurate magnitude with good solutions about 80% of the trials. Complete solutions from four stations or Pnl from 10 stations prove reliable in nearly all situations. We also explore the use of this dataset in locating the event using a combination of surface wave travel times and/or the full waveform inversion (CAPloc) that uses the CAP shifts to refine locations. If the mechanism is known (fixed) only a few stations is needed to locate an event to within 5km if date is available at less than 150km. In contrast, surface wave travel times (calibrated to within one second) produce amazing accurate locations with only 6 stations reasonably distributed. It appears this approach is easily automated as suggested by Scrivner and Helmberger (1995) who discussed travel times of Pnl and surface waves and the evolving of source accuracy as the various phases arrive.

  13. Optical testing

    NASA Technical Reports Server (NTRS)

    Wyant, James; Hochberg, Eric; Breault, Robert; Greivenkamp, John; Hunt, Gary; Mason, Pete; Mcguire, James; Meinel, Aden; Morris, Mike; Scherr, Larry

    1992-01-01

    Optical testing is one of the most vital elements in the process of preparing an optical instrument for launch. Without well understood, well controlled, and well documented test procedures, current and future mission goals will be jeopardized. We should keep in mind that the reason we test is to provide an opportunity to catch errors, oversights, and problems on the ground, where solutions are possible and difficulties can be rectified. Consequently, it is necessary to create tractable test procedures that truly provide a measure of the performance of all optical elements and systems under conditions which are close to those expected in space. Where testing is not feasible, accurate experiments are required in order to perfect models that can exactly predict the optical performance. As we stretch the boundaries of technology to perform more complex space and planetary investigations, we must expand the technology required to test the optical components and systems which we send into space. As we expand the observational wavelength ranges, so must we expand our range of optical sources and detectors. As we increase resolution and sensitivity, our understanding of optical surfaces to accommodate more stringent figure and scatter requirements must expand. Only with research and development in these areas can we hope to achieve success in the ever increasing demands made on optical testing by the highly sophisticated missions anticipated over the next two decades. Technology assessment and development plan for surface figure, surface roughness, alignment, image quality, radiometric quantities, and stray light measurement are presented.

  14. Contact Lens Solution Toxicity

    MedlinePlus

    ... rash and rashes clinical tools newsletter | contact Share | Contact Lens Solution Toxicity Information for adults A A A This image shows a reaction to contact lens solution. The prominent blood vessels and redness ...

  15. The Orthotran Solution

    ERIC Educational Resources Information Center

    Hofmann, Richard J.

    1978-01-01

    A computational algorithm, called the orthotran solution, is developed for determining oblique factor analytic solutions utilizing orthogonal transformation matrices. Selected results from illustrative studies are provided. (Author/JKS)

  16. Flowsheet Modeling and Testing of Pseudohydroxide Extraction from Aqueous Sodium Hydroxide Solutions with 3,5-di-tert-Butylphenol in Isopar® L Modified with Exxal® 8

    SciTech Connect

    Arm, Stuart T.; Lumetta, Gregg J.; Levitskaia, Tatiana G.

    2007-09-01

    A conceptual counter-current process flowsheet was developed for sodium hydroxide recovery from alkaline solutions via pseudohydroxide extraction (PHE). PHE relies on a simple sodium ion/proton exchange mechanism at elevated pH using a weak organic acid extractant. Contact of the sodium-loaded organic phase with water results in the reconstitution of the extractant in the organic phase and sodium hydroxide in the aqueous phase. In this work, the 3,5-di-tert-butylphenol (35-DTBP) cation exchanger was used in the Isopar® L diluent modified with isooctyl alcohol Exxal® 8. Equilibrium isotherms determined for PHE from pure sodium hydroxide solutions and simulated radioactive waste leachate were used to develop a semi-empirical model that could be used for designing PHE process flowsheets. Using this model, a conceptual PHE flowsheet was developed for recovering NaOH from solutions generated by caustic leaching of radioactive tank sludges. The flowsheet consists of extraction, scrub, and strip processes, each employing four equilibrium stages. Modeling of this flowsheet indicates 97% recovery of the sodium hydroxide from the waste leachate feed solution. An experimental demonstration, performed with a simulated radioactive waste leachate using batch contacts in a co-current analog of the counter-current flowsheet, confirmed the potential for practical application of PHE technology.

  17. PFP solution stabilization

    SciTech Connect

    Aftanas, B.L.

    1996-04-30

    This Functional Design Criteria (FDC) addresses remediation of the plutonium-bearing solutions currently in inventory at the Plutonium Finishing Plant (PFP). The recommendation from the Environmental Impact Statement (EIS) is that the solutions be treated thermally and stabilized as a solid for long term storage. For solutions which are not discardable, the baseline plan is to utilize a denitration process to stabilize the solutions prior to packaging for storage.

  18. Aversiveness of cadmium in solution.

    PubMed

    Cory-Slechta, D A; Weiss, B

    1981-12-01

    Weanling rats were given cadmium chloride solutions as drinking water (0, 25, 50 or 150 ppm Cd). Immediate decrements in fluid consumption and retarded weight gain were observed at the highest concentration. In addition, two of the 150 ppm rats died within four days. The rapid onset of these effects suggested taste aversion and sharply reduced water intake, not physiological impairment, as the cause. To test this possibility, rats were given a choice between two drinking water solutions. One contained distilled water, the other cadmium. Concentrations as low as 1 ppm were rejected by some rats. Additional studies showed that chronic cadmium exposure modified the intake pattern of saccharin solutions typical of rats, and that the addition of saccharin to the 150 ppm cadmium solution did not reduce its aversive properties. These data indicated that the taste of cadmium, at least in solution, is aversive to rats. Since taste aversion can reduce fluid and food consumption, and consequently body weight, properly designed experiments must include adequate control procedures such as pair-feeding and pair-watering to differentiate unique effects of cadmium from those produced by undernutrition.

  19. 40 CFR 160.83 - Reagents and solutions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... LABORATORY PRACTICE STANDARDS Testing Facilities Operation § 160.83 Reagents and solutions. All reagents and solutions in the laboratory areas shall be labeled to indicate identity, titer or concentration,...

  20. A class of nonideal solutions. 2: Application to experimental data

    NASA Technical Reports Server (NTRS)

    Zeleznik, F. J.; Donovan, L. F.

    1983-01-01

    Functions for the representation of the thermodynamic properties of nonideal solutions were applied to the experimental data for several highly nonideal solutions. The test solutions were selected to cover both electrolyte behavior. The results imply that the functions are fully capable of representing the experimental data within their accuracy over the whole composition range and demonstrate that many nonideal solutions can be regarded as members of the defined class of nonideal solutions.

  1. Solution deposition assembly

    SciTech Connect

    Roussillon, Yann; Scholz, Jeremy H; Shelton, Addison; Green, Geoff T; Utthachoo, Piyaphant

    2014-01-21

    Methods and devices are provided for improved deposition systems. In one embodiment of the present invention, a deposition system is provided for use with a solution and a substrate. The system comprises of a solution deposition apparatus; at least one heating chamber, at least one assembly for holding a solution over the substrate; and a substrate curling apparatus for curling at least one edge of the substrate to define a zone capable of containing a volume of the solution over the substrate. In another embodiment of the present invention, a deposition system for use with a substrate, the system comprising a solution deposition apparatus; at heating chamber; and at least assembly for holding solution over the substrate to allow for a depth of at least about 0.5 microns to 10 mm.

  2. Uniform Test Assembly

    ERIC Educational Resources Information Center

    Belov, Dmitry I.

    2008-01-01

    In educational practice, a test assembly problem is formulated as a system of inequalities induced by test specifications. Each solution to the system is a test, represented by a 0-1 vector, where each element corresponds to an item included (1) or not included (0) into the test. Therefore, the size of a 0-1 vector equals the number of items "n"…

  3. Topical diclofenac solution.

    PubMed

    Moen, Marit D

    2009-01-01

    Topical diclofenac solution (Pennsaid) is a liquid formulation containing the NSAID diclofenac sodium (1.5% w/w). The solution base contains 45% w/w dimethyl sulfoxide (DMSO) to enhance the absorption of diclofenac through the skin. Topical diclofenac solution is applied directly to the knee for treatment of symptoms associated with osteoarthritis of the knee. In well designed 4- to 12-week trials in patients with primary osteoarthritis of the knee, topical diclofenac solution (40 drops four times daily) was significantly more effective than placebo or vehicle control (carrier solution without diclofenac) for improving Western Ontario and McMaster Universities (WOMAC) Osteoarthritis Index pain and physical function, and improving patient global assessment (PGA) and/or patient overall health assessment scores from baseline to the final assessments. Topical diclofenac solution (50 drops three times daily) was as effective as oral diclofenac 150 mg/day for improving WOMAC pain and physical function and PGA scores in a 12-week double-blind study in patients with osteoarthritis of the knee. Topical diclofenac solution was generally well tolerated. The most common treatment-emergent adverse event experienced by topical diclofenac solution recipients was dry skin at the application site. Gastrointestinal adverse events and abnormal laboratory parameters were less common with topical diclofenac solution than with oral diclofenac. PMID:19943711

  4. Topical diclofenac solution.

    PubMed

    Moen, Marit D

    2009-01-01

    Topical diclofenac solution (Pennsaid) is a liquid formulation containing the NSAID diclofenac sodium (1.5% w/w). The solution base contains 45% w/w dimethyl sulfoxide (DMSO) to enhance the absorption of diclofenac through the skin. Topical diclofenac solution is applied directly to the knee for treatment of symptoms associated with osteoarthritis of the knee. In well designed 4- to 12-week trials in patients with primary osteoarthritis of the knee, topical diclofenac solution (40 drops four times daily) was significantly more effective than placebo or vehicle control (carrier solution without diclofenac) for improving Western Ontario and McMaster Universities (WOMAC) Osteoarthritis Index pain and physical function, and improving patient global assessment (PGA) and/or patient overall health assessment scores from baseline to the final assessments. Topical diclofenac solution (50 drops three times daily) was as effective as oral diclofenac 150 mg/day for improving WOMAC pain and physical function and PGA scores in a 12-week double-blind study in patients with osteoarthritis of the knee. Topical diclofenac solution was generally well tolerated. The most common treatment-emergent adverse event experienced by topical diclofenac solution recipients was dry skin at the application site. Gastrointestinal adverse events and abnormal laboratory parameters were less common with topical diclofenac solution than with oral diclofenac.

  5. Mixed oxide solid solutions

    DOEpatents

    Magno, Scott; Wang, Ruiping; Derouane, Eric

    2003-01-01

    The present invention is a mixed oxide solid solution containing a tetravalent and a pentavalent cation that can be used as a support for a metal combustion catalyst. The invention is furthermore a combustion catalyst containing the mixed oxide solid solution and a method of making the mixed oxide solid solution. The tetravalent cation is zirconium(+4), hafnium(+4) or thorium(+4). In one embodiment, the pentavalent cation is tantalum(+5), niobium(+5) or bismuth(+5). Mixed oxide solid solutions of the present invention exhibit enhanced thermal stability, maintaining relatively high surface areas at high temperatures in the presence of water vapor.

  6. Chlamydia Testing

    MedlinePlus

    ... Amplification Test (NAAT); Chlamydia trachomatis Culture; Chlamydia trachomatis DNA Probe Related tests: Gonorrhea Testing , HIV Antibody and HIV Antigen , Syphilis Tests , Herpes Testing , HPV Test , Trichomonas Testing All content on Lab Tests Online has ...

  7. Gravitating monopole solutions II

    NASA Astrophysics Data System (ADS)

    Breitenlohner, Peter; Forgács, Peter; Maison, Dieter

    1995-02-01

    We present analytical and numerical results for static, spherically symmetric solutions of the Einstein-Yang-Mills-Higgs equations corresponding to magnetic monopoles and non-abelian magnetically charged black holes. In the limit of infinite Higgs mass we give an existence proof for these solutions. The stability of the abelian extremal Reissner-Nordstrøm black holes is reanalyzed.

  8. Solution structure of (+)-discodermolide.

    PubMed

    Smith, A B; LaMarche, M J; Falcone-Hindley, M

    2001-03-01

    [structure: see text]. The solution structure of (+)-discodermolide (1) has been determined via 1- and 2-D NMR techniques in conjunction with Monte Carlo conformational analysis. Taken together, the results demonstrate that in solution (+)-discodermolide occupies a helical conformation remarkably similar to the solid state conformation.

  9. What State Tests Test.

    ERIC Educational Resources Information Center

    McGee, Glenn W.

    What the Illinois Goal Assessment Program (IGAP) test actually tests and the consequences of these tests for funding decisions were studied with a random sample of 100 school districts in the Cook County suburbs of Chicago. Eighth-grade IGAP scores for reading were obtained from the state report card, a document prepared by each school district…

  10. Solvent wash solution

    DOEpatents

    Neace, James C.

    1986-01-01

    Process for removing diluent degradation products from a solvent extraction solution, which has been used to recover uranium and plutonium from spent nuclear fuel. A wash solution and the solvent extraction solution are combined. The wash solution contains (a) water and (b) up to about, and including, 50 volume percent of at least one-polar water-miscible organic solvent based on the total volume of the water and the highly-polar organic solvent. The wash solution also preferably contains at least one inorganic salt. The diluent degradation products dissolve in the highly-polar organic solvent and the organic solvent extraction solvent do not dissolve in the highly-polar organic solvent. The highly-polar organic solvent and the extraction solvent are separated.

  11. Solvent wash solution

    DOEpatents

    Neace, J.C.

    1984-03-13

    A process is claimed for removing diluent degradation products from a solvent extraction solution, which has been used to recover uranium and plutonium from spent nuclear fuel. A wash solution and the solvent extraction solution are combined. The wash solution contains (a) water and (b) up to about, and including, 50 vol % of at least one-polar water-miscible organic solvent based on the total volume of the water and the highly-polar organic solvent. The wash solution also preferably contains at least one inorganic salt. The diluent degradation products dissolve in the highly-polar organic solvent and the organic solvent extraction solvent do not dissolve in the highly-polar organic solvent. The highly-polar organic solvent and the extraction solvent are separated.

  12. Microheterogeneity in Frozen Protein Solutions

    PubMed Central

    Twomey, Alan; Kurata, Kosaku; Nagare, Yutaka; Takamatsu, Hiroshi; Aksan, Alptekin

    2015-01-01

    In frozen and lyophilized systems, the biological to be stabilized (e.g. therapeutic protein, biomarker, drug-delivery vesicle) and the cryo-/lyoprotectant should be co-localized for successful stabilization. During freezing and drying, many factors cause physical separation of the biological from the cryo-/lyoprotectant, called microheterogeneity (MH), which may result in poor stabilization efficiency. We have developed a novel technique that utilized confocal Raman microspectroscopy in combination with counter-gradient freezing to evaluate the effect of a wide range of freezing temperatures (−20 < TF < 0°C) on the MH generated within a frozen formulation in only a few experiments. The freezing experiments conducted with a model system (albumin and trehalose) showed the presence of different degrees of MH in the freeze-concentrated liquid (FCL) in all solutions tested. Mainly, albumin tended to accumulate near the ice interface, where it was physically separated from the cryoprotectant. In frozen 10 wt% trehalose solutions, heterogeneity in FCL was relatively low at any TF. In frozen 20 wt% trehalose solutions, the optimum albumin to trehalose ratio in the FCL can only be ensured if the solution was frozen within a narrow range of temperatures (−16 < TF < −10°C). In the 30 wt% trehalose solutions, freezing within a much more narrow range (−12 < TF < −10°C) was needed to ensure a fairly homogeneous FCL. The method developed here will be helpful for the development of uniformly frozen and stable formulations and freezing protocols for biological as MH is presumed to directly impact stability. PMID:25888798

  13. Determining the Outcomes of an Innovative Solution for at Risk Students: Using the Tri-Squared Test as Advanced Statistical Analysis to Verify the Impact of Ninth Grade Freshman Academies, Centers, and Center Models upon Minority Student Retention and Achievement

    ERIC Educational Resources Information Center

    Osler, James Edward; Waden, Carl

    2013-01-01

    This paper discusses the implementation of the Tri-Squared Test as one of many advanced statistical measures used to verify and validate the outcomes of an initial study on academic professional's perspectives on the use, success, and viability of 9th Grade Freshman Academies, Centers, and Center Models. The initial research investigation…

  14. 40 CFR 160.83 - Reagents and solutions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Reagents and solutions. 160.83 Section... LABORATORY PRACTICE STANDARDS Testing Facilities Operation § 160.83 Reagents and solutions. All reagents and solutions in the laboratory areas shall be labeled to indicate identity, titer or concentration,...

  15. Conduction heat transfer solutions

    SciTech Connect

    VanSant, J.H.

    1980-03-01

    This text is a collection of solutions to a variety of heat conduction problems found in numerous publications, such as textbooks, handbooks, journals, reports, etc. Its purpose is to assemble these solutions into one source that can facilitate the search for a particular problem solution. Generally, it is intended to be a handbook on the subject of heat conduction. This material is useful for engineers, scientists, technologists, and designers of all disciplines, particularly those who design thermal systems or estimate temperatures and heat transfer rates in structures. More than 500 problem solutions and relevant data are tabulated for easy retrieval. There are twelve sections of solutions which correspond with the class of problems found in each. Geometry, state, boundary conditions, and other categories are used to classify the problems. A case number is assigned to each problem for cross-referencing, and also for future reference. Each problem is concisely described by geometry and condition statements, and many times a descriptive sketch is also included. At least one source reference is given so that the user can review the methods used to derive the solutions. Problem solutions are given in the form of equations, graphs, and tables of data, all of which are also identified by problem case numbers and source references.

  16. Asymmetric inflation: Exact solutions

    SciTech Connect

    Buniy, Roman V.; Berera, Arjun; Kephart, Thomas W.

    2006-03-15

    We provide exact solutions to the Einstein equations when the universe contains vacuum energy plus a uniform arrangement of magnetic fields, strings, or domain walls. Such a universe has planar symmetry; i.e., it is homogeneous but not isotropic. Further exact solutions are obtained when dust is included and approximate solutions are found for w{ne}0 matter. These cosmologies also have planar symmetry. These results may eventually be used to explain some features in the Wilkinson Microwave Anisotropy Probe data. The magnetic field case is the easiest to motivate and has the highest possibility of yielding reliable constraints on observational cosmology.

  17. VLBI-SLR Combination Solution Using GEODYN

    NASA Astrophysics Data System (ADS)

    MacMillan, D. S.; Lemoine, F. G.; Chinn, D. S.; Pavlis, E. C.; Rowlands, D. D.

    2009-12-01

    The traditional procedure followed by the IERS for generating an ITRF is to perform a combination at the technique level. Each geodetic technique provides a solution that itself is a combination of the solutions produced by the technique analysis centers. Alternatively, we would like to generate a multi-technique solution using the same software and using the same a priori models. We seek to produce such a solution combining all of the geodetic techniques at the normal equation level using GEODYN but here, as a first step, consider only the SLR-VLBI combination. The data from each 24-hour VLBI session is initially processed to generate VLBI observation and solution parametrization files for input to GEODYN. Extensive tests have been performed to ensure that the VLBI theoretical delay as calculated by the VLBI Calc/Solve software is the same (to 1 ps) as that calculated by GEODYN. Initially, we ran test solutions with GEODYN using only VLBI data to verify that VLBI solution results produced with GEODYN agree with results using Calc/Solve. Then we combine the VLBI normal equations in GEODYN with weekly SLR normal equations for the period 2004-2008 Lageos1/2 to estimate station positions and Earth orientation parameters. To connect the techniques, we apply the ground ties used by the IERS. Here we report on the results of the combination.

  18. Gonorrhea Test

    MedlinePlus

    ... gonorrhoeae Culture; Neisseria gonorrhoeae Gram Stain; Neisseria gonorrhoeae DNA Probe Related tests: Chlamydia Testing , HIV Antibody and HIV Antigen , Syphilis Tests , Herpes Testing , HPV Test , Trichomonas Testing All content on Lab Tests Online has ...

  19. Isospinning baby Skyrmion solutions

    NASA Astrophysics Data System (ADS)

    Battye, Richard A.; Haberichter, Mareike

    2013-12-01

    We perform full two-dimensional (2D) numerical relaxations of isospinning soliton solutions in the baby Skyrme model in which the global O(3) symmetry is broken by the 2D analogue of the pion mass term in the Skyrme model. In our calculations we explicitly allow the isospinning solitons to deform and to break the symmetries of the static configurations. We find that stable isospinning baby Skyrme solutions can be constructed numerically for all angular frequencies ω≤min⁡(μ,1), where μ is the mass parameter of the model. Stable, rotationally symmetric baby Skyrmion solutions for higher angular velocities are simply an artefact of the hedgehog approximation. Isospinning multisoliton solutions of topological charge B turn out to be unstable to break up into their B charge-1 constituents at some critical breakup frequency value. Furthermore, we find that for μ sufficiently large the rotational symmetry of charge-2 baby Skyrmions becomes broken at a critical angular frequency ω.

  20. The Conductivity of Solutions.

    ERIC Educational Resources Information Center

    Rayner-Canham, Geoff

    1993-01-01

    Presents historical background and modern explanations for the popular demonstration of showing conductivity of solutions through the insertion of a light-bulb conductivity tester into deionized water and water with salt in it. (PR)

  1. Reflectance of aqueous solutions

    NASA Technical Reports Server (NTRS)

    Querry, M. R.

    1972-01-01

    The optical properties and optical constants of water and aqueous solutions were studied to develop an accurate tabulation of graphical representations of the optical constants through a broad spectrum. Manuscripts of articles are presented concerning extinction coefficients, relative specular reflectance, and temperature effect on the water spectrum. Graphs of absolute reflectance, phase shifts, index of refraction, and extinction coefficients for water, heavy water and aqueous solutions are included.

  2. Benchmark problems and solutions

    NASA Technical Reports Server (NTRS)

    Tam, Christopher K. W.

    1995-01-01

    The scientific committee, after careful consideration, adopted six categories of benchmark problems for the workshop. These problems do not cover all the important computational issues relevant to Computational Aeroacoustics (CAA). The deciding factor to limit the number of categories to six was the amount of effort needed to solve these problems. For reference purpose, the benchmark problems are provided here. They are followed by the exact or approximate analytical solutions. At present, an exact solution for the Category 6 problem is not available.

  3. Piezoelectric Energy Harvesting Solutions

    PubMed Central

    Caliò, Renato; Rongala, Udaya Bhaskar; Camboni, Domenico; Milazzo, Mario; Stefanini, Cesare; de Petris, Gianluca; Oddo, Calogero Maria

    2014-01-01

    This paper reviews the state of the art in piezoelectric energy harvesting. It presents the basics of piezoelectricity and discusses materials choice. The work places emphasis on material operating modes and device configurations, from resonant to non-resonant devices and also to rotational solutions. The reviewed literature is compared based on power density and bandwidth. Lastly, the question of power conversion is addressed by reviewing various circuit solutions. PMID:24618725

  4. Conduction heat transfer solutions

    SciTech Connect

    VanSant, J.H.

    1983-08-01

    This text is a collection of solutions to a variety of heat conduction problems found in numerous publications, such as textbooks, handbooks, journals, reports, etc. Its purpose is to assemble these solutions into one source that can facilitate the search for a particular problem solution. Generally, it is intended to be a handbook on the subject of heat conduction. There are twelve sections of solutions which correspond with the class of problems found in each. Geometry, state, boundary conditions, and other categories are used to classify the problems. Each problem is concisely described by geometry and condition statements, and many times a descriptive sketch is also included. The introduction presents a synopsis on the theory, differential equations, and boundary conditions for conduction heat transfer. Some discussion is given on the use and interpretation of solutions. Supplementary data such as mathematical functions, convection correlations, and thermal properties are included for aiding the user in computing numerical values from the solutions. 155 figs., 92 refs., 9 tabs.

  5. On analytical solutions of the generalized Boussinesq equation

    NASA Astrophysics Data System (ADS)

    Kudryashov, Nikolay A.; Volkov, Alexandr K.

    2016-06-01

    Extended Boussinesq equation for the description of the Fermi-Pasta-Ulam problem is studied. It is analysed with the Painlevé test. It is shown, that the equation does not pass the Painlevé test, although necessary conditions for existence of the meromorphic solution are carried out. Method of the logistic function is introduced for Solitary wave solutions of the considered equation. Elliptic solutions for studied equation are constructed and discussed.

  6. Potentiodynamic and galvanostatic testing of NaFe0.95V0.05PO4/C composite in aqueous NaNO3 solution, and the properties of aqueous Na1.2V3O8/NaNO3/NaFe0.95V0.05PO4/C battery

    NASA Astrophysics Data System (ADS)

    Vujković, Milica; Mentus, Slavko

    2016-09-01

    The NaFe0.95V0.05PO4/C composite is synthesized by electrochemical ion displacement from LiFe0.95V0.05PO4/C composite in aqueous NaNO3 solution. A coulombic capacity amounting to ∼105 and ∼82 mAh g-1 at sodiation/desodiation rate of 500 and 5000 mAg-1, respectively, is evidenced. For the sake of comparison the same investigations is performed with LiFe0.95V0.05PO4/C composite in LiNO3 solution, and better capacity retention and rate performance is evidenced for NaFe0.95V0.05PO4/C one. This advancement is found to be due a higher participation of pseudocapacity in the sodiation/desodiation charge storage process. An aqueous battery composed of NaFe0.95V0.05PO4/C cathode, belt-like Na1.2V3O8 anode and NaNO3 solution as an electrolyte, tested galvanostatically, displays long-life performance with only 10% of capacity fade after 1000 charge/discharge cycles.

  7. Susceptibility Testing

    MedlinePlus

    ... page helpful? Also known as: Sensitivity Testing; Drug Resistance Testing; Culture and Sensitivity; C & S; Antimicrobial Susceptibility Formal name: Bacterial and Fungal Susceptibility Testing Related tests: Urine Culture ; ...

  8. Aquifer washing by micellar solutions: 2. DNAPL recovery mechanisms for an optimized alcohol surfactant solvent solution

    NASA Astrophysics Data System (ADS)

    Martel, Richard; Lefebvre, René; Gélinas, Pierre J.

    1998-03-01

    A large sand column experiment is used to illustrate the principles of complex organic contaminants (DNAPL) recovery by a chemical solution containing an alcohol ( n-butanol), a surfactant (Hostapur SAS), and two solvents ( d-limonene and toluene). The washing solution is pushed by viscous polymer solutions to keep the displacement stable. The main NAPL recovery mechanisms identified are: (1) immiscible displacement by oil saturation increase (oil swelling), oil viscosity reduction, interfacial tension lowering, and relative permeability increase; (2) miscible NAPL displacement by solubilization. Most of the NAPL was recovered in a Winsor, type II system ahead of the washing solution. The 0.8 pore volume (PV) of alcohol-surfactant-solvent solution injected recovered more than 89% of the initial residual DNAPL saturation (0.195). Winsor system types were determined by visual observation of phases and confirmed by electrical resistivity measurements of phases and water content measurements in the oleic phase. Viscosity and density lowering of the oleic phase was made using solvents and alcohol transfer from the washing solution. Small sand column tests are performed to check different rinsing strategies used to minimize washing solution residual ingredients which can be trapped in sediments. An alcohol/surfactant rinsing solution without solvent, injected behind the washing solution, minimizes solvent trapping in sediments. More than five pore volumes of polymer solution and water must be injected after the rinsing solution to decrease alcohol and SAS concentrations in sediments to an acceptable level. To obtain reasonable trapped surfactant concentrations in sediments, the displacement front between the rinsing solution and the subsequent the following polymer solution has to be stable.

  9. Dimensionally continued wormhole solutions

    SciTech Connect

    Li, X. School of Science, East China University of Science Technology, Shanghai 200237 )

    1994-09-15

    In this paper we consider wormhole solutions for the action of special Lovelock gravity'' recently discussed by Banados, Teitelboim, and Zanelli. This action is, in odd dimensions, the Chern-Simons form for the anti--de Sitter group and, in even dimensions, the Euler density constructed with the Lorentz part of the anti--de Sitter curvature tensor. We present a systematic study of classical wormhole solutions in the special Lovelock theory with various matter content, including a perfect fluid energy-momentum tensor, axionic field, and conformal scalar field.

  10. Fissile solution measurement apparatus

    DOEpatents

    Crane, T.W.; Collinsworth, P.R.

    1984-06-11

    An apparatus for determining the content of a fissile material within a solution by detecting delayed fission neutrons emitted by the fissile material after it is temporarily irradiated by a neutron source. The apparatus comprises a container holding the solution and having a portion defining a neutron source cavity centrally disposed within the container. The neutron source cavity temporarily receives the neutron source. The container has portions defining a plurality of neutron detector ports that form an annular pattern and surround the neutron source cavity. A plurality of neutron detectors count delayed fission neutrons emitted by the fissile material. Each neutron detector is located in a separate one of the neutron detector ports.

  11. Deconstructing graphite: graphenide solutions.

    PubMed

    Pénicaud, Alain; Drummond, Carlos

    2013-01-15

    Growing interest in graphene over past few years has prompted researchers to find new routes for producing this material other than mechanical exfoliation or growth from silicon carbide. Chemical vapor deposition on metallic substrates now allows researchers to produce continuous graphene films over large areas. In parallel, researchers will need liquid, large scale, formulations of graphene to produce functional graphene materials that take advantage of graphene's mechanical, electrical, and barrier properties. In this Account, we describe methods for creating graphene solutions from graphite. Graphite provides a cheap source of carbon, but graphite is insoluble. With extensive sonication, it can be dispersed in organic solvents or water with adequate additives. Nevertheless, this process usually creates cracks and defects in the graphite. On the other hand, graphite intercalation compounds (GICs) provide a means to dissolve rather than disperse graphite. GICS can be obtained through the reaction of alkali metals with graphite. These compounds are a source of graphenide salts and also serve as an excellent electronic model of graphene due to the decoupling between graphene layers. The graphenide macroions, negatively charged graphene sheets, form supple two-dimensional polyelectrolytes that spontaneously dissolve in some organic solvents. The entropic gain from the dissolution of counterions and the increased degrees of freedom of graphene in solution drives this process. Notably, we can obtain graphenide solutions in easily processable solvents with low boiling points such as tetrahydrofuran or cyclopentylmethylether. We performed a statistical analysis of high resolution transmission electronic micrographs of graphene sheets deposited on grids from GICs solution to show that the dissolved material has been fully exfoliated. The thickness distribution peaks with single layers and includes a few double- or triple-layer objects. Light scattering analysis of the

  12. Decontamination solution development studies

    SciTech Connect

    Allen, R.P.; Fetrow, L.K.; Kjarmo, H.E.; Pool, K.H.

    1993-09-01

    This study was conducted for the Westinghouse Hanford Company (WHC) by Pacific Northwest Laboratory (PNL) as part of the Hanford Grout Technology Program (HGTP). The objective of this study was to identify decontamination solutions capable of removing radioactive contaminants and grout from the Grout Treatment Facility (GTF) process equipment and to determine the impact of these solutions on equipment components and disposal options. The reference grout used in this study was prepared with simulated double-shell slurry feed (DSSF) and a dry blend consisting of 40 wt % limestone flour, 28 wt % blast furnace slag, 28 wt % fly ash, and 4 wt % type I/II Portland cement.

  13. Osmosis without solute.

    PubMed

    Ernst, E

    1975-01-01

    Van't Hoff's misconception of the kinetics of solutes in a solution was long ago displaced by the thesis about osmotic water migration caused by the difference in chemical potential on the two sides of the semipermeable membrane. Consequently the osmotic process was now investigated when normal water and heavy water were separated by the "semipermeable" membrane. Due to the difference between the chemical potentials a substantial osomotic pressure was measured on the side of the heavy water simultaneously with a significant migration of water on both sides.

  14. MAMA Dispersion Solutions

    NASA Astrophysics Data System (ADS)

    Lennon, Daniel

    2009-07-01

    Wavelength dispersion solutions will be determined on a yearly basis as part of a long-term monitoring program. Deep engineering wavecals for each MAMA grating will be obtained at common cenwaves. Intermediate settings will also be taken to check the reliability of derived dispersion solutions. Final selection was determined on basis of past monitoring and C17 requirements. The internal wavelength calibrations will be taken using the LINE line lamp. Extra-deep wavecals are included for some echelle modes and first order modes to ensure detection of weak lines.

  15. In vitro digestion testing of lipid-based delivery systems: calcium ions combine with fatty acids liberated from triglyceride rich lipid solutions to form soaps and reduce the solubilization capacity of colloidal digestion products.

    PubMed

    Devraj, Ravi; Williams, Hywel D; Warren, Dallas B; Mullertz, Anette; Porter, Christopher J H; Pouton, Colin W

    2013-01-30

    In vitro digestion testing is of practical importance to predict the fate of drugs administered in lipid-based delivery systems. Calcium ions are often added to digestion media to increase the extent of digestion of long-chain triglycerides (LCTs), but the effects they have on phase behaviour of the products of digestion, and consequent drug solubilization, are not well understood. This study investigates the effect of calcium and bile salt concentrations on the rate and extent of in vitro digestion of soybean oil, as well as the solubilizing capacity of the digestion products for two poorly water-soluble drugs, fenofibrate and danazol. In the presence of higher concentrations of calcium ions, the solubilization capacities of the digests were reduced for both drugs. This effect is attributed to the formation of insoluble calcium soaps, visible as precipitates during the digestions. This reduces the availability of liberated fatty acids to form mixed micelles and vesicles, thereby reducing drug solubilization. The use of high calcium concentrations does indeed force in vitro digestion of LCTs but may overestimate the extent of drug precipitation that occurs within the intestinal lumen.

  16. Metal Surface Decontamination by the PFC Solution

    SciTech Connect

    Hui-Jun Won; Gye-Nam Kim; Wang-Kyu Choi; Chong-Hun Jung; Won-Zin Oh

    2006-07-01

    PFC (per-fluorocarbon) spray decontamination equipment was fabricated and its decontamination behavior was investigated. Europium oxide powder was mixed with the isotope solution which contains Co-60 and Cs-137. The different shape of metal specimens artificially contaminated with europium oxide powder was used as the surrogate contaminants. Before and after the application of the PFC spray decontamination method, the radioactivity of the metal specimens was measured by MCA. The decontamination factors were in the range from 9.6 to 62.4. The spent PFC solution was recycled by distillation. Before and after distillation, the turbidity of PFC solution was also measured. From the test results, it was found that more than 98% of the PFC solution could be recycled by a distillation. (authors)

  17. Crystallochemiluminescence of solutions

    NASA Astrophysics Data System (ADS)

    Gus'kov, A. P.; Nekrasova, L. P.; Gornakova, A. S.; Shikunova, I. A.

    2014-09-01

    It is shown that the chemiluminescence intensity from luminol solutions reaches a maximum when the latter are crystallized. This phenomenon is explained by the complex dynamics of the phase transition, chemical reactions, and degradation of electronic excitation energy. Luminescence of new type, called crystallochemiluminescence, is revealed.

  18. Knowledge Retrieval Solutions.

    ERIC Educational Resources Information Center

    Khan, Kamran

    1998-01-01

    Excalibur RetrievalWare offers true knowledge retrieval solutions. Its fundamental technologies, Adaptive Pattern Recognition Processing and Semantic Networks, have capabilities for knowledge discovery and knowledge management of full-text, structured and visual information. The software delivers a combination of accuracy, extensibility,…

  19. Cells and Hypotonic Solutions.

    ERIC Educational Resources Information Center

    Bery, Julia

    1985-01-01

    Describes a demonstration designed to help students better understand the response of plant and animal cells to hypotonic solutions. The demonstration uses a balloon inside a flexible, thin-walled cardboard box. Air going in corresponds to water entering by osmosis, and, like real cells, if stretched enough, the balloon will burst. (DH)

  20. Service-based Solutions.

    ERIC Educational Resources Information Center

    Cummings, Lynda; Winston, Michael

    1998-01-01

    Describes the Solutions model used at Shelley High School in Idaho which gives students the opportunity to gain practical experience while tackling community problems. This approach is built on the three fundamentals of an integrated curriculum, a problem-solving focus, and service-based learning. Sample problems include increasing certain trout…

  1. Problems and Solutions.

    ERIC Educational Resources Information Center

    NatureScope, 1989

    1989-01-01

    Examines some of the reasons tropical rain forests are being destroyed and ways people are working to protect these forests. Provides activities on how people can help, reason for saving the forests, individual actions related to forest problems and solutions, and issues and problems. Three copyable pages accompany activities. (Author/RT)

  2. Maintenance Crisis vs Solutions.

    ERIC Educational Resources Information Center

    Haggard, Susie

    Industrial maintenance in Northeast Georgia is facing an acute crisis. Contributing factors are economic development that is depleting the work force, aging of the population, downsizing of the military, and lack of technical school graduates. Solutions to the crisis fall into three categories: short-term, mid-term, and long-term. For short-term…

  3. An Inexpensive Solution Calorimeter

    ERIC Educational Resources Information Center

    Kavanagh, Emma; Mindel, Sam; Robertson, Giles; Hughes, D. E. Peter

    2008-01-01

    We describe the construction of a simple solution calorimeter, using a miniature bead thermistor as a temperature-sensing element. This has a response time of a few seconds and made it possible to carry out a thermometric reaction in under a minute, which led to minimal heat losses. Small temperature changes of 1 K associated with enthalpies of…

  4. School Solutions for Cyberbullying

    ERIC Educational Resources Information Center

    Sutton, Susan

    2009-01-01

    This article offers solutions and steps to prevent cyberbullying. Schools can improve their ability to handle cyberbullying by educating staff members, students, and parents and by implementing rules and procedures for how to handle possible incidents. Among the steps is to include a section about cyberbullying and expectations in the student…

  5. Test plan :

    SciTech Connect

    Dwyer, Stephen F.

    2013-05-01

    This test plan is a document that provides a systematic approach to the planned testing of rooftop structures to determine their actual load carrying capacity. This document identifies typical tests to be performed, the responsible parties for testing, the general feature of the tests, the testing approach, test deliverables, testing schedule, monitoring requirements, and environmental and safety compliance.

  6. Photocatalytic Solutions Create Self-Cleaning Surfaces

    NASA Technical Reports Server (NTRS)

    2013-01-01

    A Stennis Space Center researcher investigating the effectiveness of photocatalytic materials for keeping the Center's buildings free of grime turned to a solution created by PURETi Inc. of New York City. Testing proved successful, and NASA and the company now share a Dual Use Technology partnership. PURETi's coatings keep surfaces clean and purify surrounding air, eliminating pollution, odors, and microbes.

  7. Scaffolding Mathematical Modelling with a Solution Plan

    ERIC Educational Resources Information Center

    Schukajlow, Stanislaw; Kolter, Jana; Blum, Werner

    2015-01-01

    In the study presented in this paper, we examined the possibility to scaffold mathematical modelling with strategies. The strategies were prompted using an instrument called "solution plan" as a scaffold. The effects of this step by step instrument on mathematical modelling competency and on self-reported strategies were tested using…

  8. Prenatal Tests

    MedlinePlus

    ... X Home > Pregnancy > Prenatal care > Prenatal tests Prenatal tests E-mail to a friend Please fill in ... if you’re feeling fine. What are prenatal tests? Prenatal tests are medical tests you get during ...

  9. Thyroid Tests

    MedlinePlus

    ... calories and how fast your heart beats. Thyroid tests check how well your thyroid is working. They ... thyroid diseases such as hyperthyroidism and hypothyroidism. Thyroid tests include blood tests and imaging tests. Blood tests ...

  10. Pinworm test

    MedlinePlus

    Oxyuriasis test; Enterobiasis test; Tape test ... diagnose this infection is to do a tape test. The best time to do this is in ... to determine if there are eggs. The tape test may need to be done on 3 separate ...

  11. Charcoal filter testing

    SciTech Connect

    Lyons, J.

    1997-08-01

    In this very brief, informal presentation, a representative of the US Nuclear Regulatory Commission outlines some problems with charcoal filter testing procedures and actions being taken to correct the problems. Two primary concerns are addressed: (1) the process to find the test method is confusing, and (2) the requirements of the reference test procedures result in condensation on the charcoal and causes the test to fail. To address these problems, emergency technical specifications were processed for three nuclear plants. A generic or an administrative letter is proposed as a more permanent solution. 1 fig.

  12. Testing? Testing? In Literature?

    ERIC Educational Resources Information Center

    Purves, Alan C.

    The assumptions behind secondary school literature course tests--whether asking students to recall aspects of literary works, to relate literary works to each other, or to analyze unfamiliar literary works--are open to question. They fail to acknowledge some of the most important aspects of literature which, if properly taught, should provide a…

  13. Testing "Compatibility Testing."

    ERIC Educational Resources Information Center

    Robins, Elliot; Huston, Ted L.

    Most models of marital choice are attempts to explain choices within the field of available eligibles. The essence of compatibility testing is that people select their mates by evaluating the match between psychological characteristics after sorting the available field on the basis of social characteristics. A compatibility model seems to require…

  14. Stability Tests with Actual Savannah River Site Radioactive Waste

    SciTech Connect

    Walker, D.D.

    2002-09-09

    solutions in two laboratory experiments. The first experiment tested four waste solutions for supersaturation of aluminum by monitoring the aluminum concentration after seeding with gibbsite. The second experiment tested two waste samples for precipitation of aluminosilicates by heating the solutions to accelerate solids formation. The results of the experiments with actual waste solutions are supported in this report.

  15. Germanium-silicon solid solutions

    NASA Technical Reports Server (NTRS)

    Zemskov, V. S.; Kubasov, V. N.; Belokurova, I. N.; Titkov, A. N.; Shulpina, I. L.; Safarov, V. I.; Guseva, N. B.

    1977-01-01

    An experiment on melting and directional crystallization of an antimony (Sb) doped germanium silicon (GeSi) solid solution was designed for the Apollo-Soyuz Test Project (ASTP) to study the possibility of using zero-g conditions for obtaining solid-solution monocrystals with uniformly distributed components. Crystallization in the zero-g environment did not occur under ideal stationary growth and segregation conditions. Crystallization under zero-g conditions revealed the heterogeneous nature of Si and Sb distribution in the cross sections of crystals. The presence of the radial thermal gradient in the multipurpose furnace could be one of the reasons for such Si and Sb distribution. The structure of space-grown crystals correlates with the nature of heterogeneities of Si and Sb distribution in crystals. The type of surface morphology and the contour observed in space-grown crystals were never observed in ground-based crystals and indicate the absence of wetting of the graphitized walls of the ampoule by the melt during melting and crystallization.

  16. Aqueous Solution Chemistry on Mars

    NASA Astrophysics Data System (ADS)

    Quinn, R.; Hecht, M.; Kounaves, S.; Young, S.; West, S.; Fisher, A.; Grunthaner, P.

    2007-12-01

    Currently en route to Mars, the Phoenix mission carries four wet chemistry cells designed to perform basic solution chemistry on martian soil. The measurement objectives are typical of those that would be performed on an unknown sample on Earth, including detection of common anions and cations, total conductivity, pH, redox potential, cyclic voltammetry (CV), etc. Both the challenge and the novelty arise from the necessity to perform these measurements with severely constrained resources in a harsh and (literally) alien environment. Sensors for all measurements are integrated into a common "beaker," with the ability to perform a two-point calibration of some sensors using a pair of low-concentration solutions. Sulfate measurement is performed with a crude titration. While most measurements use ion selective electrodes, halide interferences are resolved by independent chronopotentiometry (CP) measurements. No preconditioning of the soil-water mixture is possible, nor is any physical characterization of the introduced soil sample beyond coarse visual inspection. Among the idiosyncrasies of the measurement is the low external pressure, which requires that the analysis be performed close to the boiling point of water under an atmosphere consisting almost entirely of water vapor. Despite these liabilities, however, extensive laboratory characterization has validated the basic approach, and protocols for both CV and CP have been developed and tested. Enhancing the value of the measurement is the suite of coordinated observations, such as microscopy and evolved gas analysis, to be performed by other Phoenix instruments.

  17. Counting solutions from finite samplings.

    PubMed

    Huang, Haiping; Zhou, Haijun

    2012-02-01

    We formulate the solution counting problem within the framework of the inverse Ising problem and use fast belief propagation equations to estimate the entropy whose value provides an estimate of the true one. We test this idea on both diluted models [random 2-SAT (2-satisfiability) and 3-SAT problems] and a fully connected model (binary perceptron), and show that when the constraint density is small, this estimate can be very close to the true value. The information stored by the salamander retina under the natural movie stimuli can also be estimated, and our result is consistent with that obtained by the Monte Carlo method. Of particular significance is that the sizes of other metastable states for this real neuronal network are predicted. PMID:22463290

  18. Counting solutions from finite samplings

    NASA Astrophysics Data System (ADS)

    Huang, Haiping; Zhou, Haijun

    2012-02-01

    We formulate the solution counting problem within the framework of the inverse Ising problem and use fast belief propagation equations to estimate the entropy whose value provides an estimate of the true one. We test this idea on both diluted models [random 2-SAT (2-satisfiability) and 3-SAT problems] and a fully connected model (binary perceptron), and show that when the constraint density is small, this estimate can be very close to the true value. The information stored by the salamander retina under the natural movie stimuli can also be estimated, and our result is consistent with that obtained by the Monte Carlo method. Of particular significance is that the sizes of other metastable states for this real neuronal network are predicted.

  19. 40 CFR 797.1300 - Daphnid acute toxicity test.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... dilution water through a test chamber or culture tank with no recycling. (5) Immobilization means the lack... solutions. (ii) Construction materials. (A) Materials and equipment that contact test solutions should...

  20. 40 CFR 797.1300 - Daphnid acute toxicity test.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... dilution water through a test chamber or culture tank with no recycling. (5) Immobilization means the lack... solutions. (ii) Construction materials. (A) Materials and equipment that contact test solutions should...

  1. 40 CFR 797.1300 - Daphnid acute toxicity test.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... dilution water through a test chamber or culture tank with no recycling. (5) Immobilization means the lack... solutions. (ii) Construction materials. (A) Materials and equipment that contact test solutions should...

  2. An Improved Calcium Flame Test.

    ERIC Educational Resources Information Center

    Pearson, Robert S.

    1985-01-01

    Indicates that the true red color of calcium can be obtained (using the procedure described by Sorm and Logowski) if the calcium ion solution is mixed with an equal volume of saturated ammonium bromide solution. Suggestions for flame tests of other elements are also noted. (JN)

  3. The sustainability solutions agenda.

    PubMed

    Sarewitz, Daniel; Clapp, Richard; Crumbley, Cathy; Kriebel, David; Tickner, Joel

    2012-01-01

    Progress toward a more sustainable society is usually described in a "knowledge-first" framework, where science characterizes a problem in terms of its causes and mechanisms as a basis for subsequent action. Here we present a different approach-A Sustainability Solutions Agenda (SSA)-which seeks from the outset to identify the possible pathways to solutions. SSA focuses on uncovering paths to sustainability by improving current technological practice, and applying existing knowledge to identify and evaluate technological alternatives. SSA allows people and organizations to transition toward greater sustainability without sacrificing essential technological functions, and therefore does not threaten the interests that depend on those functions. Whereas knowledge-first approaches view scientific information as sufficient to convince people to take the right actions, even if those actions are perceived as against their immediate interests, SSA allows values to evolve toward greater attention to sustainability as a result of the positive experience of solving a problem. PMID:22776577

  4. Software Solutions for ICME

    NASA Astrophysics Data System (ADS)

    Schmitz, G. J.; Engstrom, A.; Bernhardt, R.; Prahl, U.; Adam, L.; Seyfarth, J.; Apel, M.; de Saracibar, C. Agelet; Korzhavyi, P.; Ågren, J.; Patzak, B.

    2016-01-01

    The Integrated Computational Materials Engineering expert group (ICMEg), a coordination activity of the European Commission, aims at developing a global and open standard for information exchange between the heterogeneous varieties of numerous simulation tools. The ICMEg consortium coordinates respective developments by a strategy of networking stakeholders in the first International Workshop on Software Solutions for ICME, compiling identified and relevant software tools into the Handbook of Software Solutions for ICME, discussing strategies for interoperability between different software tools during a second (planned) international workshop, and eventually proposing a scheme for standardized information exchange in a future book or document. The present article summarizes these respective actions to provide the ICME community with some additional insights and resources from which to help move this field forward.

  5. The sustainability solutions agenda.

    PubMed

    Sarewitz, Daniel; Clapp, Richard; Crumbley, Cathy; Kriebel, David; Tickner, Joel

    2012-01-01

    Progress toward a more sustainable society is usually described in a "knowledge-first" framework, where science characterizes a problem in terms of its causes and mechanisms as a basis for subsequent action. Here we present a different approach-A Sustainability Solutions Agenda (SSA)-which seeks from the outset to identify the possible pathways to solutions. SSA focuses on uncovering paths to sustainability by improving current technological practice, and applying existing knowledge to identify and evaluate technological alternatives. SSA allows people and organizations to transition toward greater sustainability without sacrificing essential technological functions, and therefore does not threaten the interests that depend on those functions. Whereas knowledge-first approaches view scientific information as sufficient to convince people to take the right actions, even if those actions are perceived as against their immediate interests, SSA allows values to evolve toward greater attention to sustainability as a result of the positive experience of solving a problem.

  6. Solute transport in groundwater

    NASA Astrophysics Data System (ADS)

    Dougherty, David E.

    Continued research interest in transport in the subsurface was demonstrated at the “Solute Transport in Groundwater” session held at the 1985 AGU Spring Meeting in Baltimore. This session, following on the heels of the very successful special symposium on “Coupling Geochemical and Hydrologic Models for Subsurface Solute Transport,” was organized by Lenny Konikow of the U.S. Geological Survey (USGS, Reston, Va.) and copresided by Steve Gorelick (USGS, Menlo Park, Calif.) and David Dougherty (Princeton University, Princeton, N.J.). Participation was strong, with 12 contributed papers and about 150 attendees. The papers addressed a wide variety of topics, ranging from the theoretical to the applied, from physics to numerical methods.

  7. Stabilization of polyaniline solutions

    SciTech Connect

    Wrobleski, D.A.; Benicewicz, B.C.

    1993-12-01

    Adding hindered amine light stabilizers (HALS) to N-methyl- pyrrolidinone (NMP) solutions of polyaniline delays gelation. It is hypothesized that HALS act in some manner other than as traditional antioxidants in preventing gelation; the secondary amine functional group appears to play a critical role, perhaps by disrupting the physical crystallization network that may contribute to gelation. Pyrrolidine, a secondary amine, or ammonia is an effective cosolvent with NMP in dissolving PAn-EB (emeraldine base). 6 refs, 4 figs.

  8. A fluorimeter for solutions

    USGS Publications Warehouse

    Fletcher, Mary H.; Warner, E. Ray

    1953-01-01

    description of and complete drawings for the construction of a fluorimeter for the measurement of fluorescence of solutions are given. The instrument is sturdy and versatile. It may be used with various phototubes and measuring devices. It is constructed so that phototubes and filters may be changed readily. Sensitivity is controlled easily over a wide range by limiting the size of either the ultraviolet or fluorescent light beam with standard apertures.

  9. Contact solution algorithms

    NASA Technical Reports Server (NTRS)

    Tielking, John T.

    1989-01-01

    Two algorithms for obtaining static contact solutions are described in this presentation. Although they were derived for contact problems involving specific structures (a tire and a solid rubber cylinder), they are sufficiently general to be applied to other shell-of-revolution and solid-body contact problems. The shell-of-revolution contact algorithm is a method of obtaining a point load influence coefficient matrix for the portion of shell surface that is expected to carry a contact load. If the shell is sufficiently linear with respect to contact loading, a single influence coefficient matrix can be used to obtain a good approximation of the contact pressure distribution. Otherwise, the matrix will be updated to reflect nonlinear load-deflection behavior. The solid-body contact algorithm utilizes a Lagrange multiplier to include the contact constraint in a potential energy functional. The solution is found by applying the principle of minimum potential energy. The Lagrange multiplier is identified as the contact load resultant for a specific deflection. At present, only frictionless contact solutions have been obtained with these algorithms. A sliding tread element has been developed to calculate friction shear force in the contact region of the rolling shell-of-revolution tire model.

  10. Using a solutions approach.

    PubMed

    Kimberley, Mike

    2004-06-01

    Companies today are placing an even greater emphasis on keeping all recordable employee injuries to a minimum. A reduction in hand and finger injuries, along with their associated medical and indemnity costs, can have a positive impact on the company's bottom line. Safety actually can provide revenue when the safety program extends beyond the confines of specific product applications. Conducting a careful and complete analysis of all of the critical issues in a company's production process and the procedures in its safety program will allow the organization to identify opportunities for cutting costs while enhancing worker comfort and safety. Identifying business solutions--and not just product applications--will provide organizations with additional cost saving opportunities. Tighter controls, standardization, SKU reduction, productivity improvements, and recycling are just a few of the potential solutions that can be applied. Partnering with a reputable glove manufacturer that offers a critical safety program analysis has the potential to provide numerous, long-term advantages. A business solutions approach can provide potential productivity improvements, injury reductions, standardization of best practices, and SKU reductions, all of which result in a safer work environment. PMID:15232914

  11. Photoperiod-induced changes in cloacal gland physiology and testes weight in male Japanese quail selected for divergent adrenocortical responsiveness.

    PubMed

    Satterlee, D G; Marin, R H

    2004-06-01

    In quail, activation of the hypothalamic-pituitary-adrenal axis has been linked to depression in the hypothalamic-pituitary-testicular axis, and cloacal gland development and foam production are known to be androgen dependent. Therefore, photoperiod manipulations that induce gonadal growth (long day) and involution (short day) were used to examine changes in cloacal gland physiology in male quail from lines selected for a reduced (low stress, LS) or exaggerated (high stress, HS) plasma corticosterone response to brief restraint. Line differences in cloacal gland area (CAREA) and volume (CVOL), the proportion of individuals that produced cloacal gland foam (PICF), and the intensity of cloacal gland foam production (CFP) were initially assessed in adult males maintained on stimulatory, long photoperiods of 14L:10D. Thereafter, these variables were re-examined weekly in the same males during their subsequent exposure to 3 wk of short days (6L:18D) followed by return to long d for 3 more wk. Line differences in testes weight relative to body weight (RTW) were also measured at the end of the study. CAREA and CVOL were markedly greater in LS than HS males grown under long days. As expected, these indices of cloacal gland size were greatly reduced upon exposure to short days in both lines. However, line differences (LS > HS) in CAREA and CVOL were maintained during the first 2 wk of exposure to short days. Line differences in the depressed cloacal gland size measures were no longer evident by the third week on short days as well as after the first week of relighting wherein there were no further depressions in gland size of either line. However, by the end of 2 wk of rephotostimulation and thereafter, marked line differences (LS > HS) in CAREA and CVOL re-emerged. Photoperiod-induced line effects on CFP generally mimicked those of CAREA and CVOL. The PICF was marginally different (P < 0.07) between the lines (LS > HS) only after 1 wk of light reduction. After 3 wk of

  12. Semianalytical solutions of radioactive or reactive transport invariably-fractured layered media: 1. Solutes

    SciTech Connect

    Moridis, George J.

    2001-10-10

    In this paper, semianalytical solutions are developed for the problem of transport of radioactive or reactive solute tracers through a layered system of heterogeneous fractured media with misaligned fractures. The tracer transport equations in the non-flowing matrix account for (a) diffusion, (b) surface diffusion, (c) mass transfer between the mobile and immobile water fractions, (d) linear kinetic or equilibrium physical, chemical, or combined solute sorption or colloid filtration, and (e) radioactive decay or first-order chemical reactions. The tracer-transport equations in the fractures account for the same processes, in addition to advection and hydrodynamic dispersion. Any number of radioactive decay daughter products (or products of a linear, first-order reaction chain) can be tracked. The solutions, which are analytical in the Laplace space, are numerically inverted to provide the solution in time and can accommodate any number of fractured and/or porous layers. The solutions are verified using analytical solutions for limiting cases of solute and colloid transport through fractured and porous media. The effect of important parameters on the transport of {sup 3}H, {sup 237}Np and {sup 239}Pu (and its daughters) is investigated in several test problems involving layered geological systems of varying complexity.

  13. Organic ionic salt draw solutions for osmotic membrane bioreactors.

    PubMed

    Bowden, Katie S; Achilli, Andrea; Childress, Amy E

    2012-10-01

    This investigation evaluates the use of organic ionic salt solutions as draw solutions for specific use in osmotic membrane bioreactors. Also, this investigation presents a simple method for determining the diffusion coefficient of ionic salt solutions using only a characterized membrane. A selection of organic ionic draw solutions underwent a desktop screening process before being tested in the laboratory and evaluated for performance using specific salt flux (reverse salt flux per unit water flux), biodegradation potential, and replenishment cost. Two of the salts were found to have specific salt fluxes three to six times lower than two commonly used inorganic draw solutions, NaCl and MgCl(2). All of the salts tested have organic anions with the potential to degrade in the bioreactor as a carbon source and aid in nutrient removal. Results demonstrate the potential benefits of organic ionic salt draw solutions over currently implemented inorganics in osmotic membrane bioreactor systems. PMID:22771022

  14. Ham test

    MedlinePlus

    Acid hemolysin test; Paroxysmal nocturnal hemoglobinuria - Ham test; PNH - Ham test ... BJ. In: Chernecky CC, Berger BJ, eds. Laboratory Tests and Diagnostic Procedures . 6th ed. Philadelphia, PA: Elsevier ...

  15. Coombs test

    MedlinePlus

    Direct antiglobulin test; Indirect antiglobulin test; Anemia - hemolytic ... No special preparation is necessary for this test. ... There are 2 types of the Coombs test: Direct Indirect The direct ... that are stuck to the surface of red blood cells. Many diseases ...

  16. Trichomonas Testing

    MedlinePlus

    ... vaginalis by Amplified Detection; Trichomonas vaginalis by Direct Fluorescent Antibody (DFA) Related tests: Pap Smear , Chlamydia Testing , ... and men. Other methods. These include the direct fluorescent antibody (DFA) test and a test that detects ...

  17. Towards combined global monthly gravity field solutions

    NASA Astrophysics Data System (ADS)

    Jaeggi, Adrian; Meyer, Ulrich; Beutler, Gerhard; Weigelt, Matthias; van Dam, Tonie; Mayer-Gürr, Torsten; Flury, Jakob; Flechtner, Frank; Dahle, Christoph; Lemoine, Jean-Michel; Bruinsma, Sean

    2014-05-01

    Currently, official GRACE Science Data System (SDS) monthly gravity field solutions are generated independently by the Centre for Space Research (CSR) and the German Research Centre for Geosciences (GFZ). Additional GRACE SDS monthly fields are provided by the Jet Propulsion Laboratory (JPL) for validation and outside the SDS by a number of other institutions worldwide. Although the adopted background models and processing standards have been harmonized more and more by the various processing centers during the past years, notable differences still exist and the users are more or less left alone with a decision which model to choose for their individual applications. This procedure seriously limits the accessibility of these valuable data. Combinations are well established in the area of other space geodetic techniques, such as the Global Navigation Satellite Systems (GNSS), Satellite Laser Ranging (SLR), and Very Long Baseline Interferometry (VLBI). Regularly comparing and combining space-geodetic products has tremendously increased the usefulness of the products in a wide range of disciplines and scientific applications. Therefore, we propose in a first step to mutually compare the large variety of available monthly GRACE gravity field solutions, e.g., by assessing the signal content over selected regions, by estimating the noise over the oceans, and by performing significance tests. We make the attempt to assign different solution characteristics to different processing strategies in order to identify subsets of solutions, which are based on similar processing strategies. Using these subsets we will in a second step explore ways to generate combined solutions, e.g., based on a weighted average of the individual solutions using empirical weights derived from pair-wise comparisons. We will also assess the quality of such a combined solution and discuss the potential benefits for the GRACE and GRACE-FO user community, but also address minimum processing

  18. Analytic solution of a five-direction radiation transport model

    SciTech Connect

    Cramer, S.N.

    1988-01-01

    In order to test certain spatial and angular dependent Monte Carlo biasing techniques, a one-dimensional, one energy, two-media, five-direction radiation transport model has been devised for which an analytic solution exists. Although this solution is too long to be conveniently expressed in an explicit form, it can be easily evaluated on the smallest of computers. This solution is discussed in this paper. 1 ref.

  19. Treatment of spent electropolishing solution for removal of cobalt-60

    SciTech Connect

    Taylor, P.A.; Youngblood, E.L.; Macon, R.J.

    1996-02-01

    The Irradiated Materials Examination and Testing (IMET) Facility at Oak Ridge National Laboratory electropolishes various types of irradiated metal specimens prior to examination of metallurgical and mechanical properties. The standard electropolishing solution used at IMET for most specimens consists of a 7:1 methanol/sulfuric acid mixture, with smaller amounts of a 3:1 methanol/nitric acid solution and a 10:6:1 methanol/2-butoxyethanol/perchloric acid solution also being used. Cobalt-60 is the primary source of gamma radiation in the spent solutions, with lesser amounts from manganese-54 and iron-59. A treatment method is needed to remove most of the Co-60 from these solutions to allow the waste solutions to be contact-handled for disposal. A wide range of adsorbents was tested for removing cobalt from the electropolishing solutions. No adsorbent was found that would treat full strength solution, but a complexing ion exchange resin (Chelex 100, BioRad Labs, or Amberlite IRC-718, Rohm and Haas Co.) will remove cobalt and other heavy metals from partially neutralized (pH=3) solution. A 5 wt% sodium hydroxide solution is used for pH adjustment, since more concentrated caustic caused sodium sulfate precipitates to form. Lab-scale column tests have shown that about 10 bed volumes of methanol/sulfuric acid solution, 30 bed volumes of methanol/nitric acid solution or 15 bed volumes of methanol/2-butoxyethanol/perchloric acid solution can be treated prior to initial Co-60 breakthrough.

  20. Radiographic solution contamination.

    PubMed

    Hardman, P K; Tilmon, M F; Taylor, T S

    1987-06-01

    Contamination of processor solutions adversely affects the image quality of radiographic films. The purpose of this study was to determine the amount of developer or fixer contaminant that was necessary to produce a significant densitometric change in the base plus fog, speed, or contrast optical density readings for panoramic film. Significant differences in base plus fog (after 16 mL of fixer contaminant was added to developer), speed index (after 4 mL), and contrast index (after 8 mL) were observed in comparison with control values. PMID:3473399

  1. Critical droplet theory explains the glass formability of aqueous solutions.

    PubMed

    Warkentin, Matthew; Sethna, James P; Thorne, Robert E

    2013-01-01

    When pure water is cooled at ~10(6) K / s, it forms an amorphous solid (glass) instead of the more familiar crystalline phase. The presence of solutes can reduce this required (or "critical") cooling rate by orders of magnitude. Here, we present critical cooling rates for a variety of solutes as a function of concentration and a theoretical framework for understanding these rates. For all solutes tested, the critical cooling rate is an exponential function of concentration. The exponential's characteristic concentration for each solute correlates with the solute's Stokes radius. A modification of critical droplet theory relates the characteristic concentration to the solute radius and the critical nucleation radius of ice in pure water. This simple theory of ice nucleation and glass formability in aqueous solutions has consequences for general glass-forming systems, and in cryobiology, cloud physics, and climate modeling. PMID:23383808

  2. Generating Problems from Problems and Solutions from Solutions

    ERIC Educational Resources Information Center

    Arcavi, Abraham; Resnick, Zippora

    2008-01-01

    This article describes a geometrical solution to a problem that is usually solved geometrically as an example of how alternative solutions may enrich the teaching and learning of mathematics. (Contains 11 figures.)

  3. Dirac solutions for quaternionic potentials

    SciTech Connect

    De Leo, Stefano Giardino, Sergio

    2014-02-15

    The Dirac equation is solved for quaternionic potentials, i V{sub 0} + j W{sub 0} (V{sub 0}∈R , W{sub 0}∈C). The study shows two different solutions. The first one contains particle and anti-particle solutions and leads to the diffusion, tunneling, and Klein energy zones. The standard solution is recovered taking the complex limit of this solution. The second solution, which does not have a complex counterpart, can be seen as a V{sub 0}-antiparticle or |W{sub 0}|-particle solution.

  4. Pediculosis capitis: why prefer a solution to shampoo or spray?

    PubMed

    Armoni, M; Bibi, H; Schlesinger, M; Pollak, S; Metzker, A

    1988-11-01

    Two hundred and sixty-eight children with pediculosis capitis took part in a comparative study to test the efficacy of five different pediculocides commonly used in Israel. The preparations used were pyrethrin shampoo, pyrethroid spray, malathion solution, carbaryl shampoo and carbaryl lotion. Carbaryl lotion and malathion solution were much more efficient when compared to the shampoo and spray preparations.

  5. Narrated Animated Solution Videos in a Mastery Setting

    ERIC Educational Resources Information Center

    Schroeder, Noah; Gladding, Gary; Gutmann, Brianne; Stelzer, Timothy

    2015-01-01

    Narrated animated solution videos were implemented in a clinical study that compared a mastery setting that employed repeated cycles of testing with instructional support to a group that had a single opportunity to experience the materials. The mastery setting students attempted sequential questions sets on a topic, with animated solutions between…

  6. Precipitation of plutonium from acidic solutions using magnesium oxide

    SciTech Connect

    Jones, S.A.

    1994-12-05

    Magnesium oxide will be used as a neutralizing agent for acidic plutonium-containing solutions. It is expected that as the magnesium oxide dissolves, the pH of the solution will rise, and plutonium will precipitate. The resulting solid will be tested for suitability to storage. The liquid is expected to contain plutonium levels that meet disposal limit requirements.

  7. 75 Quick and Easy Solutions to Common Classroom Disruptions

    ERIC Educational Resources Information Center

    Harris, Bryan; Goldberg, Cassandra

    2012-01-01

    This very well organized book is packed with practical solutions to the most common classroom problems--side talk, rude behavior, calling out, students losing focus, and students refusing even to try. Every solution is classroom-tested, highly effective, and quick and easy to implement! Use this book to help make your classroom a happier, more…

  8. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1989-01-01

    Provides the methodology put forth by Moore and Kraus to separate Co++ from Ni++ in an 8M HCl solution. Notes that cobalt(II) forms a wide variety of anionic complexes. Points out that as the solutions leave the exchange column the color bands of green, blue, and pink are easily seen. (MVL)

  9. Water tests on optical fibers

    NASA Astrophysics Data System (ADS)

    Volotinen, Tarja T.

    1999-12-01

    It is a general assumption that water itself, rather than impurities of water solutions, is dangerous for standard optical fibers. In this review paper, a summary of the results on water test conditions, made by COST 246 Action, is given, and the factors affecting the test results of strength and fatigue tests, are discussed. A fiber may have very different strength degradation in water depending on the chemical conditions, such as, ion concentration of the water, test vessel material, temperature etc.

  10. Retained Gas Sampler Calibration and Simulant Tests

    SciTech Connect

    CRAWFORD, B.A.

    2000-01-05

    This test plan provides a method for calibration of the retained gas sampler (RGS) for ammonia gas analysis. Simulant solutions of ammonium hydroxide at known concentrations will be diluted with isotopically labeled 0.04 M ammonium hydroxide solution. Sea sand solids will also be mixed with ammonium hydroxide solution and diluent to determine the accuracy of the system for ammonia gas analysis.

  11. A new association state of solutes in nanoconfined aqueous solutions

    NASA Astrophysics Data System (ADS)

    Tu, YuSong; Zhao, Liang; Fang, HaiPing

    2016-11-01

    Recently, we have found a reversible transition between the dispersion and aggregation states of solute molecules in aqueous solutions confined in nanoscale geometry, where solutes exhibit distinct behavior in a new association state from that in the dispersion and aggregation states observed usually in macroscopic systems. However, it remains unknown whether this new association state of solute molecules found in nanoconfined systems would vanish with the system size increasing and approaching the macroscopic scale. Here, we achieve the phase diagram of solute association states by making the analyses of Gibbs free energy of solutes in nanoconfined aqueous solutions in detail. In the phase diagram, we observe a closed regime with a finite system size of nanoconfined aqueous solutions and a solute concentration range, only in which there exists the new association state of solutes with the reversible transition between the aggregation and dispersion states, and there indeed exists an upper limit of the system size for the new association state, around several tens nanometers. These findings regarding the intimate connection between the system size and the solute association behavior provides the comprehensive understanding of the association dynamics of solutes in nanoconfined environment.

  12. An Analysis of Children's Written Solutions to Word Problems

    ERIC Educational Resources Information Center

    Knifong, J. Dan; Holtan, Boyd

    1976-01-01

    Sixth graders wrote solutions to the word problems in the Metropolitan Achievement Test. Errors were analyzed and classified. At least 52 percent of errors were computational or clerical and could not be attributed to reading difficulties. (SD)

  13. Immediate Truth--Temporal Contiguity between a Cognitive Problem and Its Solution Determines Experienced Veracity of the Solution

    ERIC Educational Resources Information Center

    Topolinski, Sascha; Reber, Rolf

    2010-01-01

    A temporal contiguity hypothesis for the experience of veracity is tested which states that a solution candidate to a cognitive problem is more likely to be experienced as correct the faster it succeeds the problem. Experiment 1 varied the onset time of the appearance of proposed solutions to anagrams (50 ms vs. 150 ms) and found for both correct…

  14. Semianalytical solutions of radioactive or reactive solute transport in variably fractured layered media

    NASA Astrophysics Data System (ADS)

    Moridis, George J.

    2002-12-01

    In this paper, semianalytical solutions are developed for the problem of transport of radioactive or reactive solute tracers through a layered system of heterogeneous fractured media with misaligned fractures. The tracer transport equations in the nonflowing matrix account for (1) diffusion, (2) surface diffusion, (3) mass transfer between mobile and immobile water fractions, (4) linear kinetic or equilibrium physical, chemical, or combined sorption or colloid filtration, and (5) radioactive decay or first-order chemical reactions. The tracer transport equations in the fractures account for the same processes, in addition to advection and hydrodynamic dispersion. Any number of radioactive decay daughter products (or products of a linear, first-order reaction chain) can be tracked. The solutions, which are analytical in the Laplace space, are numerically inverted to provide the solution in time and can accommodate any number of fractured and/or porous layers. The solutions are verified using analytical and numerical solutions for limiting cases of solute and colloid transport through fractured and porous media. The effect of important parameters on the transport of 3H, 99Tc, 237Np, and 239Pu (and its daughters) is investigated in several test problems involving layered geological systems of varying complexity.

  15. Solubility of solutes in compressed gases: Dilute solution theory

    SciTech Connect

    Wang, X.; Tavlarides, L.L. . Dept. of Chemical Engineering)

    1994-03-01

    A dilute solution theory is developed for describing the thermodynamic behavior of a compressed gaseous dilute solution. The considerations follow generally accepted statistical treatments for describing dilute liquid solutions. The theory is self-consistent with the ideal gas law for dilute gases and with Henry's law for dilute liquid (or solid) solutions. Further, it provides a simple linear relationship which represents well the solubility behavior of a heavy solute (solid or liquid) in a gaseous solvent over relatively wide density regions of the solvent (i.e., 0 [le] [rho] [le] 2.0/V[sub c]).

  16. Prenatal Testing

    MedlinePlus

    ... tests are suggested for all women, such as screenings for gestational diabetes, Down syndrome, and HIV. Other tests might be offered based on your: Age Personal or family health history Ethnic background Results of routine tests Some tests are screening tests. They detect risks for or signs of ...

  17. Analytic solutions of an unclassified artifact /

    SciTech Connect

    Trent, Bruce C.

    2012-03-01

    This report provides the technical detail for analytic solutions for the inner and outer profiles of the unclassified CMM Test Artifact (LANL Part Number 157Y-700373, 5/03/2001) in terms of radius and polar angle. Furthermore, analytic solutions are derived for the legacy Sheffield measurement hardware, also in terms of radius and polar angle, using part coordinates, i.e., relative to the analytic profile solutions obtained. The purpose of this work is to determine the exact solution for the “cosine correction” term inherent to measurement with the Sheffield hardware. The cosine correction is required in order to interpret the actual measurements taken by the hardware in terms of an actual part definition, or “knot-point spline definition,” that typically accompanies a component drawing. Specifically, there are two portions of the problem: first an analytic solution must be obtained for any point on the part, e.g., given the radii and the straight lines that define the part, it is required to find an exact solution for the inner and outer profile for any arbitrary polar angle. Next, the problem of the inspection of this part must be solved, i.e., given an arbitrary sphere (representing the inspection hardware) that comes in contact with the part (inner and outer profiles) at any arbitrary polar angle, it is required to determine the exact location of that intersection. This is trivial for the case of concentric circles. In the present case, however, the spherical portion of the profiles is offset from the defined center of the part, making the analysis nontrivial. Here, a simultaneous solution of the part profiles and the sphere was obtained.

  18. Preservative solution for skeletal muscle biopsy samples

    PubMed Central

    Kurt, Yasemin Gulcan; Kurt, Bulent; Ozcan, Omer; Topal, Turgut; Kilic, Abdullah; Muftuoglu, Tuba; Acikel, Cengizhan; Sener, Kenan; Sahiner, Fatih; Yigit, Nuri; Aydin, Ibrahim; Alay, Semih; Ekinci, Safak

    2015-01-01

    Context: Muscle biopsy samples must be frozen with liquid nitrogen immediately after excision and maintained at -80°C until analysis. Because of this requirement for tissue processing, patients with neuromuscular diseases often have to travel to centers with on-site muscle pathology laboratories for muscle biopsy sample excision to ensure that samples are properly preserved. Aim: Here, we developed a preservative solution and examined its protectiveness on striated muscle tissues for a minimum of the length of time that would be required to reach a specific muscle pathology laboratory. Materials and Methods: A preservative solution called Kurt-Ozcan (KO) solution was prepared. Eight healthy Sprague-Dawley rats were sacrificed; striated muscle tissue samples were collected and divided into six different groups. Muscle tissue samples were separated into groups for morphological, enzyme histochemical, molecular, and biochemical analysis. Statistical method used: Chi-square and Kruskal Wallis tests. Results: Samples kept in the KO and University of Wisconsin (UW) solutions exhibited very good morphological scores at 3, 6, and 18 hours, but artificial changes were observed at 24 hours. Similar findings were observed for the evaluated enzyme activities. There were no differences between the control group and the samples kept in the KO or UW solution at 3, 6, and 18 hours for morphological, enzyme histochemical, and biochemical features. The messenger ribonucleic acid (mRNA) of β-actin gene was protected up to 6 hours in the KO and UW solutions. Conclusion: The KO solution protects the morphological, enzyme histochemical, and biochemical features of striated muscle tissue of healthy rats for 18 hours and preserves the mRNA for 6 hours. PMID:26019417

  19. Solubility of pllutonium in alkaline salt solutions

    SciTech Connect

    Hobbs, D.T.; Edwards, T.B.

    1993-02-26

    Plutonium solubility data from several studies have been evaluated. For each data set, a predictive model has been developed where appropriate. In addition, a statistical model and corresponding prediction intervals for plutonium solubility as a quadratic function of the hydroxide concentration have been developed. Because of the wide range of solution compositions, the solubility of plutonium can vary by as much as three orders of magnitude for any given hydroxide concentration and still remain within the prediction interval. Any nuclear safety assessments that depend on the maximum amount of plutonium dissolved in alkaline salt solutions should use concentrations at least as great as the upper prediction limits developed in this study. To increase the confidence in the prediction model, it is recommended that additional solubility tests be conducted at low hydroxide concentrations and with all of the other solution components involved. To validate the model for application to actual waste solutions, it is recommended that the plutonium solubilities in actual waste solutions be determined and compared to the values predicted by the quadratic model.

  20. Immersion lithography bevel solutions

    NASA Astrophysics Data System (ADS)

    Tedeschi, Len; Tamada, Osamu; Sanada, Masakazu; Yasuda, Shuichi; Asai, Masaya

    2008-03-01

    The introduction of Immersion lithography, combined with the desire to maximize the number of potential yielding devices per wafer, has brought wafer edge engineering to the forefront for advanced semiconductor manufactures. Bevel cleanliness, the position accuracy of the lithography films, and quality of the EBR cut has become more critical. In this paper, the effectiveness of wafer track based solutions to enable state-of-art bevel schemes is explored. This includes an integrated bevel cleaner and new bevel rinse nozzles. The bevel rinse nozzles are used in the coating process to ensure a precise, clean film edge on or near the bevel. The bevel cleaner is used immediately before the wafer is loaded into the scanner after the coating process. The bevel cleaner shows promise in driving down defectivity levels, specifically printing particles, while not damaging films on the bevel.

  1. Naturally selecting solutions

    PubMed Central

    Manning, Timmy; Sleator, Roy D; Walsh, Paul

    2013-01-01

    For decades, computer scientists have looked to nature for biologically inspired solutions to computational problems; ranging from robotic control to scheduling optimization. Paradoxically, as we move deeper into the post-genomics era, the reverse is occurring, as biologists and bioinformaticians look to computational techniques, to solve a variety of biological problems. One of the most common biologically inspired techniques are genetic algorithms (GAs), which take the Darwinian concept of natural selection as the driving force behind systems for solving real world problems, including those in the bioinformatics domain. Herein, we provide an overview of genetic algorithms and survey some of the most recent applications of this approach to bioinformatics based problems. PMID:23222169

  2. Internet Business Solutions

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Cogent Software, Inc. was formed in January 1995 by David Atkinson and Irene Woerner, both former employees of the Jet Propulsion Laboratory (JPL). Several other Cogent employees also worked at JPL. Atkinson headed JPL's Information Systems Technology section and Woerner lead the Advanced User Interfaces Group. Cogent's mission is to help companies organize and manage their online content by developing advanced software for the next generation of online directories and information catalogs. The company offers a complete range of Internet solutions, including Internet access, Web site design, local and wide-area networks, and custom software for online commerce applications. Cogent also offers DesignSphere Online, an electronic community for the communications arts industry. Customers range from small offices to manufacturers with thousands of employees, including Chemi-Con, one of the largest manufacturers of capacitors in the world.

  3. 2010 Water & Aqueous Solutions

    SciTech Connect

    Dor Ben-Amotz

    2010-08-13

    Water covers more than two thirds of the surface of the Earth and about the same fraction of water forms the total mass of a human body. Since the early days of our civilization water has also been in the focus of technological developments, starting from converting it to wine to more modern achievements. The meeting will focus on recent advances in experimental, theoretical, and computational understanding of the behavior of the most important and fascinating liquid in a variety of situations and applications. The emphasis will be less on water properties per se than on water as a medium in which fundamental dynamic and reactive processes take place. In the following sessions, speakers will discuss the latest breakthroughs in unraveling these processes at the molecular level: Water in Solutions; Water in Motion I and II; Water in Biology I and II; Water in the Environment I and II; Water in Confined Geometries and Water in Discussion (keynote lecture and poster winners presentations).

  4. Thyroid Tests

    MedlinePlus

    ... Organizations (PDF, 269 KB). Alternate Language URL Thyroid Tests Page Content On this page: What is the ... Top ] Why do health care providers perform thyroid tests? Health care providers perform thyroid tests to assess ...

  5. Laboratory Tests

    MedlinePlus

    Laboratory tests check a sample of your blood, urine, or body tissues. A technician or your doctor ... compare your results to results from previous tests. Laboratory tests are often part of a routine checkup ...

  6. Laboratory Tests

    MedlinePlus

    ... Home Medical Devices Products and Medical Procedures In Vitro Diagnostics Lab Tests Laboratory Tests Share Tweet Linkedin ... Approved Home and Lab Tests Find All In Vitro Diagnostic Products and Decision Summaries Since November 2003 ...

  7. IQ testing

    MedlinePlus

    Many IQ tests are used today. Whether they measure actual intelligence or simply certain abilities is controversial. IQ tests measure a specific functioning ability and may not accurately ... any intelligence test may be culturally biased. The more widely ...

  8. Test Madness

    ERIC Educational Resources Information Center

    Hedrick, Wanda B., Ed.

    2007-01-01

    There's accountability and then there's the testing craze an iatrogenic practice that undermines real learning. Hedrick documents the negative effects of testing, giving teachers another weapon in their arsenal against mindless preparation for high-stakes tests.

  9. String test

    MedlinePlus

    Duodenal parasites test; Giardia - string test ... To have this test, you swallow a string with a weighted gelatin capsule on the end. The string is pulled out 4 hours later. Any bile , blood, or mucus attached to ...

  10. Sulfonylurea Treatment Before Genetic Testing in Neonatal Diabetes: Pros and Cons

    PubMed Central

    Carmody, David; Bell, Charles D.; Hwang, Jessica L.; Dickens, Jazzmyne T.; Sima, Daniela I.; Felipe, Dania L.; Zimmer, Carrie A.; Davis, Ajuah O.; Kotlyarevska, Kateryna; Naylor, Rochelle N.; Philipson, Louis H.

    2014-01-01

    Context: Diabetes in neonates nearly always has a monogenic etiology. Earlier sulfonylurea therapy can improve glycemic control and potential neurodevelopmental outcomes in children with KCNJ11 or ABCC8 mutations, the most common gene causes. Objective: Assess the risks and benefits of initiating sulfonylurea therapy before genetic testing results become available. Design, Setting, and Patients: Observational retrospective study of subjects with neonatal diabetes within the University of Chicago Monogenic Diabetes Registry. Main Outcome Measures: Response to sulfonylurea (determined by whether insulin could be discontinued) and treatment side effects in those treated empirically. Results: A total of 154 subjects were diagnosed with diabetes before 6 months of age. A genetic diagnosis had been determined in 118 (77%), with 73 (47%) having a mutation in KCNJ11 or ABCC8. The median time from clinical diagnosis to genetic diagnosis was 10.4 weeks (range, 1.6 to 58.2 wk). In nine probands, an empiric sulfonylurea trial was initiated within 28 days of diabetes diagnosis. A genetic cause was subsequently found in eight cases, and insulin was discontinued within 14 days of sulfonylurea initiation in all of these cases. Conclusions: Sulfonylurea therapy appears to be safe and often successful in neonatal diabetes patients before genetic testing results are available; however, larger numbers of cases must be studied. Given the potential beneficial effect on neurodevelopmental outcome, glycemic control, and the current barriers to expeditious acquisition of genetic testing, an empiric inpatient trial of sulfonylurea can be considered. However, obtaining a genetic diagnosis remains imperative to inform long-term management and prognosis. PMID:25238204

  11. Numerical solutions of telegraph equations with the Dirichlet boundary condition

    NASA Astrophysics Data System (ADS)

    Ashyralyev, Allaberen; Turkcan, Kadriye Tuba; Koksal, Mehmet Emir

    2016-08-01

    In this study, the Cauchy problem for telegraph equations in a Hilbert space is considered. Stability estimates for the solution of this problem are presented. The third order of accuracy difference scheme is constructed for approximate solutions of the problem. Stability estimates for the solution of this difference scheme are established. As a test problem to support theoretical results, one-dimensional telegraph equation with the Dirichlet boundary condition is considered. Numerical solutions of this equation are obtained by first, second and third order of accuracy difference schemes.

  12. Knop's Solution Is Not What It Seems.

    ERIC Educational Resources Information Center

    Hershey, David R.

    2001-01-01

    Discusses Knob's solution, which was considered the ideal plant growth solution in 1865, and recommends eliminating Knob's solution from active teaching. Describes solution culture basics including nutrient solutions, containers and aeration, and plants and light. (Contains 12 references.) (YDS)

  13. VERIFICATION TEST PROBLEMS

    SciTech Connect

    Moran, B

    2007-08-08

    We present analytic solutions to two test problems that can be used to check the hydrodynamic implementation in computer codes designed to calculate the propagation of shocks in spherically convergent geometry. Our analysis is restricted to fluid materials with constant bulk modulus. In the first problem we present the exact initial acceleration and pressure gradient at the outer surface of a sphere subjected to an exponentially decaying pressure of the form P(t) = P{sub 0}e{sup -at}. We show that finely-zoned hydro-code simulations are in good agreement with our analytic solution. In the second problem we discuss the implosions of incompressible spherical fluid shells and we present the radial pressure profile across the shell thickness. We also discuss a semi-analytic solution to the time-evolution of a nearly spherical shell with arbitrary but small initial 3-dimensional (3-D) perturbations on its inner and outer surfaces.

  14. Mobile evaporator corrosion test results

    SciTech Connect

    Rozeveld, A.; Chamberlain, D.B.

    1997-05-01

    Laboratory corrosion tests were conducted on eight candidates to select a durable and cost-effective alloy for use in mobile evaporators to process radioactive waste solutions. Based on an extensive literature survey of corrosion data, three stainless steel alloys (304L, 316L, AL-6XN), four nickel-based alloys (825, 625, 690, G-30), and titanium were selected for testing. The corrosion tests included vapor phase, liquid junction (interface), liquid immersion, and crevice corrosion tests on plain and welded samples of candidate materials. Tests were conducted at 80{degrees}C for 45 days in two different test solutions: a nitric acid solution. to simulate evaporator conditions during the processing of the cesium ion-exchange eluant and a highly alkaline sodium hydroxide solution to simulate the composition of Tank 241-AW-101 during evaporation. All of the alloys exhibited excellent corrosion resistance in the alkaline test solution. Corrosion rates were very low and localized corrosion was not observed. Results from the nitric acid tests showed that only 316L stainless steel did not meet our performance criteria. The 316L welded interface and crevice specimens had rates of 22.2 mpy and 21.8 mpy, respectively, which exceeds the maximum corrosion rate of 20 mpy. The other welded samples had about the same corrosion resistance as the plain samples. None of the welded samples showed preferential weld or heat-affected zone (HAZ) attack. Vapor corrosion was negligible for all alloys. All of the alloys except 316L exhibited either {open_quotes}satisfactory{close_quotes} (2-20 mpy) or {open_quotes}excellent{close_quotes} (<2 mpy) corrosion resistance as defined by National Association of Corrosion Engineers. However, many of the alloys experienced intergranular corrosion in the nitric acid test solution, which could indicate a susceptibility to stress corrosion cracking (SCC) in this environment.

  15. Anaphylactic-like reaction to lugol solution during colposcopy.

    PubMed

    Indraccolo, Ugo; Palombino, Katia; Greco, Pantaleo

    2009-01-01

    There are a lack of reports about the adverse effects of Lugol iodine solution staining of the genital epithelia, known as a Schiller test, during colposcopy. We report that during the Schiller test, a patient complained of an anaphylactic-like reaction to the Lugol solution with vaginal and generalized pruritus, vaginal edema, hypotension, tachycardia, and breathing difficulties. Vaginal iodine was completely washed out with saline solution, resulting in improvement and a disappearance of the symptoms without the use of any drugs. The safety of Lugol staining during colposcopy needs to be assessed.

  16. Framework for generating multimonopole solutions

    NASA Astrophysics Data System (ADS)

    Wang, L. L. C.

    The 't Hooft-Polyakov monopole solution is discussed and it is shown that in the limit of vanishing Higgs potential the monopole solution corresponds to the self dual Yang-Mills solution depending only on three of the four coordinates. The formulation of self dual Yang-Mills equations is complex 4-Euclidean space, the R-gauge and the BI transformation are presented. In this formulation every BI-transformation increases the monopole charge by one unit, if the resulting solution can be shown to have nonsingular energy density and real potential. The conditions for nonsingularity and reality are explicitly given. The explicit one and two monopole solutions are discussed in this formalism. The multimonopole solutions of Prasad and Rossi are given, with comment on the use of the BI transformation to generate solutions to the Ernst equation, which miraculously is identical to self dual Yang-Mills equation in the R-gauge for geometry with axial symmetry.

  17. Fungal Tests

    MedlinePlus

    ... effectiveness of treatment. For many superficial skin and yeast infections, a clinical examination of the affected person ... the chemical solution dissolves non-fungal elements; reveals yeast cells and fungal hyphae (branching filaments) on a ...

  18. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1990-01-01

    Presented are two demonstrations; "Heat of Solution and Colligative Properties: An Illustration of Enthalpy and Entropy," and "A Vapor Pressure Demonstration." Included are lists of materials and experimental procedures. Apparatus needed are illustrated. (CW)

  19. Insight solutions are correct more often than analytic solutions

    PubMed Central

    Salvi, Carola; Bricolo, Emanuela; Kounios, John; Bowden, Edward; Beeman, Mark

    2016-01-01

    How accurate are insights compared to analytical solutions? In four experiments, we investigated how participants’ solving strategies influenced their solution accuracies across different types of problems, including one that was linguistic, one that was visual and two that were mixed visual-linguistic. In each experiment, participants’ self-judged insight solutions were, on average, more accurate than their analytic ones. We hypothesised that insight solutions have superior accuracy because they emerge into consciousness in an all-or-nothing fashion when the unconscious solving process is complete, whereas analytic solutions can be guesses based on conscious, prematurely terminated, processing. This hypothesis is supported by the finding that participants’ analytic solutions included relatively more incorrect responses (i.e., errors of commission) than timeouts (i.e., errors of omission) compared to their insight responses. PMID:27667960

  20. Solutions for Hot Situations

    NASA Technical Reports Server (NTRS)

    2003-01-01

    From the company that brought the world an integral heating and cooling food service system after originally developing it for NASA's Apollo Program, comes yet another orbital offshoot: a product that can be as thin as paper and as strong as steel. Nextel Ceramic Textiles and Composites from 3M Company offer space-age protection and innovative solutions for hot situations, ranging from NASA to NASCAR. With superior thermal protection, Nextel fabrics, tape, and sleevings outperform other high temperature textiles such as aramids, carbon, glass, and quartz, permitting engineers and manufacturers to handle applications up to 2,500 F (1,371 C). The stiffness and strength of Nextel Continuous Ceramic Fibers make them a great match for improving the rigidity of aluminum in metal matrix composites. Moreover, the fibers demonstrate low shrinkage at operating temperatures, which allow for the manufacturing of a dimensionally stable product. These novel fibers also offer excellent chemical resistance, low thermal conductivity, thermal shock resistance, low porosity, and unique electrical properties.

  1. Plutonium solution analyzer

    SciTech Connect

    Burns, D.A.

    1994-09-01

    A fully automated analyzer has been developed for plutonium solutions. It was assembled from several commercially available modules, is based upon segmented flow analysis, and exhibits precision about an order of magnitude better than commercial units (0.5%-O.05% RSD). The system was designed to accept unmeasured, untreated liquid samples in the concentration range 40-240 g/L and produce a report with sample identification, sample concentrations, and an abundance of statistics. Optional hydraulics can accommodate samples in the concentration range 0.4-4.0 g/L. Operating at a typical rate of 30 to 40 samples per hour, it consumes only 0.074 mL of each sample and standard, and generates waste at the rate of about 1.5 mL per minute. No radioactive material passes through its multichannel peristaltic pump (which remains outside the glovebox, uncontaminated) but rather is handled by a 6-port, 2-position chromatography-type loop valve. An accompanying computer is programmed in QuickBASIC 4.5 to provide both instrument control and data reduction. The program is truly user-friendly and communication between operator and instrument is via computer screen displays and keyboard. Two important issues which have been addressed are waste minimization and operator safety (the analyzer can run in the absence of an operator, once its autosampler has been loaded).

  2. Simple de Sitter Solutions

    SciTech Connect

    Silverstein, Eva; /Stanford U., Phys. Dept. /SLAC

    2008-01-07

    We present a framework for de Sitter model building in type IIA string theory, illustrated with specific examples. We find metastable dS minima of the potential for moduli obtained from a compactification on a product of two Nil three-manifolds (which have negative scalar curvature) combined with orientifolds, branes, fractional Chern-Simons forms, and fluxes. As a discrete quantum number is taken large, the curvature, field strengths, inverse volume, and four dimensional string coupling become parametrically small, and the de Sitter Hubble scale can be tuned parametrically smaller than the scales of the moduli, KK, and winding mode masses. A subtle point in the construction is that although the curvature remains consistently weak, the circle fibers of the nilmanifolds become very small in this limit (though this is avoided in illustrative solutions at modest values of the parameters). In the simplest version of the construction, the heaviest moduli masses are parametrically of the same order as the lightest KK and winding masses. However, we provide a method for separating these marginally overlapping scales, and more generally the underlying supersymmetry of the model protects against large corrections to the low-energy moduli potential.

  3. Simple de Sitter solutions

    SciTech Connect

    Silverstein, Eva

    2008-05-15

    We present a framework for de Sitter model building in type IIA string theory, illustrated with specific examples. We find metastable de Sitter (dS) minima of the potential for moduli obtained from a compactification on a product of two nil three-manifolds (which have negative scalar curvature) combined with orientifolds, branes, fractional Chern-Simons forms, and fluxes. As a discrete quantum number is taken large, the curvature, field strengths, inverse volume, and four-dimensional string coupling become parametrically small, and the de Sitter Hubble scale can be tuned parametrically smaller than the scales of the moduli, Kaluza Klein (KK), and winding mode masses. A subtle point in the construction is that although the curvature remains consistently weak, the circle fibers of the nilmanifolds become very small in this limit (though this is avoided in illustrative solutions at modest values of the parameters). In the simplest version of the construction, the heaviest moduli masses are parametrically of the same order as the lightest KK and winding masses. However, we provide a method for separating these marginally overlapping scales, and more generally the underlying supersymmetry of the model protects against large corrections to the low-energy moduli potential.

  4. Testing Services

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Trace Laboratories is an independent testing laboratory specializing in testing printed circuit boards, automotive products and military hardware. Technical information from NASA Tech Briefs and two subsequent JPL Technical Support packages have assisted Trace in testing surface insulation resistance on printed circuit board materials. Testing time was reduced and customer service was improved because of Jet Propulsion Laboratory technical support packages.

  5. Stationary axially symmetric solutions in Brans-Dicke theory

    NASA Astrophysics Data System (ADS)

    Kirezli, Pınar; Delice, Özgür

    2015-11-01

    Stationary, axially symmetric Brans-Dicke-Maxwell solutions are reexamined in the framework of the Brans-Dicke (BD) theory. We see that, employing a particular parametrization of the standard axially symmetric metric simplifies the procedure of obtaining the Ernst equations for axially symmetric electrovacuum spacetimes for this theory. This analysis also permits us to construct a two parameter extension in both Jordan and Einstein frames of an old solution generating technique frequently used to construct axially symmetric solutions for BD theory from a seed solution of general relativity. As applications of this technique, several known and new solutions are constructed including a general axially symmetric BD-Maxwell solution of Plebanski-Demianski with vanishing cosmological constant, i.e., the Kinnersley solution and general magnetized Kerr-Newman-type solutions. Some physical properties and the circular motion of test particles for a particular subclass of Kinnersley solution, i.e., a Kerr-Newman-NUT-type solution for BD theory, are also investigated in some detail.

  6. Acid Test For Annealing Of Welds

    NASA Technical Reports Server (NTRS)

    Deese, Gary E.; Ellgass, Joseph P.

    1989-01-01

    Solution changes color if heat-treated condition lost. Simple test indicates whether welded joint retained its postweld heat-treated condition after reworking including rewelding and grinding. Test used instead of Rockwell or Brinell hardness tests when reworked surface inaccessible to hardness-testing apparatus or when small surface imperfections created by apparatus unacceptable.

  7. Thermodynamics of feldspathoid solutions

    NASA Astrophysics Data System (ADS)

    Sack, Richard O.; Ghiorso, Mark S.

    We have developed models for the thermody-namic properties of nephelines, kalsilites, and leucites in the simple system NaAlSiO4-KAlSiO4-Ca0.5AlSiO4-SiO2-H2O that are consistent with all known constraints on subsolidus equilibria and thermodynamic properties, and have integrated them into the existing MELTS software package. The model for nepheline is formulated for the simplifying assumptions that (1) a molecular mixing-type approximation describes changes in the configurational entropy associated with the coupled exchange substitutions □Si?NaAl and □Ca? Na2 and that (2) Na+ and K+ display long-range non-convergent ordering between a large cation and the three small cation sites in the Na4Al4Si4O16 formula unit. Notable features of the model include the prediction that the mineral tetrakalsilite (``panunzite'', sensu stricto) results from anti-ordering of Na and K between the large cation and the three small cation sites in the nepheline structure at high temperatures, an average dT/dP slope of about 55°/kbar for the reaction over the temperature and pressure ranges 800-1050 °C and 500-5000 bars, roughly symmetric (i.e. quadratic) solution behavior of the K-Na substitution along joins between fully ordered components in nepheline, and large positive Gibbs energies for the nepheline reciprocal reactions and and for the leucite reciprocal reaction

  8. A comparison of solute-transport solution techniques based on inverse modelling results

    USGS Publications Warehouse

    Mehl, S.; Hill, M.C.

    2000-01-01

    Five common numerical techniques (finite difference, predictor-corrector, total-variation-diminishing, method-of-characteristics, and modified-method-of-characteristics) were tested using simulations of a controlled conservative tracer-test experiment through a heterogeneous, two-dimensional sand tank. The experimental facility was constructed using randomly distributed homogeneous blocks of five sand types. This experimental model provides an outstanding opportunity to compare the solution techniques because of the heterogeneous hydraulic conductivity distribution of known structure, and the availability of detailed measurements with which to compare simulated concentrations. The present work uses this opportunity to investigate how three common types of results-simulated breakthrough curves, sensitivity analysis, and calibrated parameter values-change in this heterogeneous situation, given the different methods of simulating solute transport. The results show that simulated peak concentrations, even at very fine grid spacings, varied because of different amounts of numerical dispersion. Sensitivity analysis results were robust in that they were independent of the solution technique. They revealed extreme correlation between hydraulic conductivity and porosity, and that the breakthrough curve data did not provide enough information about the dispersivities to estimate individual values for the five sands. However, estimated hydraulic conductivity values are significantly influenced by both the large possible variations in model dispersion and the amount of numerical dispersion present in the solution technique.Five common numerical techniques (finite difference, predictor-corrector, total-variation-diminishing, method-of-characteristics, and modified-method-of-characteristics) were tested using simulations of a controlled conservative tracer-test experiment through a heterogeneous, two-dimensional sand tank. The experimental facility was constructed using randomly

  9. Ergometer error and biological variation in power output in a performance test with three cycle ergometers.

    PubMed

    Paton, C D; Hopkins, W G

    2006-06-01

    When physical performance is monitored with an ergometer, random error arising from the ergometer combines with biological variation from the subject to limit the precision of estimation of performance changes. We report here the contributions of ergometer error and biological variation to the error of measurement in a performance test with two popular cycle ergometers (air-braked Kingcycle, mobile SRM crankset) and a relatively new inexpensive mobile ergometer (PowerTap hub). Eleven well-trained male cyclists performed a familiarization trial followed by three 5-min time trials within 2 wk on a racing cycle fitted with the SRM and PowerTap and mounted on the Kingcycle. Mean power output in each trial was recorded with all ergometers simultaneously. A novel analysis using mixed modelling of log-transformed mean power provided estimates of the standard error of measurement as a coefficient of variation and its components arising from the ergometer and the cyclists. The usual errors of measurement were: Kingcycle 2.2 %, PowerTap 1.5 %, and SRM 1.6 % (90 % confidence limits +/- 1.3). The components of these errors arising purely from the ergometers and the cyclists were: Kingcycle 1.8 %, PowerTap 0.9 %, SRM 1.1 %, and cyclists 1.2 % (+/- 1.5). Thus, ergometer errors and biological variation made substantial contributions to the usual error of measurement. Use of the best ergometers and of test protocols that reduce biological variation would improve monitoring of the small changes that matter to elite athletes.

  10. Iodine addition using triiodide solutions

    NASA Technical Reports Server (NTRS)

    Rutz, Jeffrey A.; Muckle, Susan V.; Sauer, Richard L.

    1992-01-01

    The study develops: a triiodide solution for use in preparing ground service equipment (GSE) water for Shuttle support, an iodine dissolution method that is reliable and requires minimal time and effort to prepare, and an iodine dissolution agent with a minimal concentration of sodium salt. Sodium iodide and hydriodic acid were both found to dissolve iodine to attain the desired GSE iodine concentrations of 7.5 +/- 2.5 mg/L and 25 +/- 5 mg/L. The 1.75:1 and 2:1 sodium iodide solutions produced higher iodine recoveries than the 1.2:1 hydriodic acid solution. A two-hour preparation time is required for the three sodium iodide solutions. The 1.2:1 hydriodic acid solution can be prepared in less than 5 min. Two sodium iodide stock solutions (2.5:1 and 2:1) were found to dissolve iodine without undergoing precipitation.

  11. Workplace Testing: Who's Testing Whom?

    ERIC Educational Resources Information Center

    Greenberg, Eric Rolfe

    1989-01-01

    A survey conducted by the American Management Association on workplace-testing policies included questions about drug testing, polygraphs, and testing for the human immunodeficiency virus. The survey found that testing increased from 21 percent in 1986 to 37 percent in 1987 and 48 percent in the 1988 survey. (JOW)

  12. Colligative properties of simple solutions.

    PubMed

    Andrews, F C

    1976-11-01

    Vapor pressure lowering, osmotic pressure, boiling point elevation, and freezing point depression are all related quantitatively to the decrease in micro(1)(soln) upon the addition of solute in forming a solution. In any equilibrium system, regardless of whether it is in a gravitational field or whether it contains walls, semipermeable membranes, phase transitions, or solutes, all equilibria are maintained locally, in the small region of the equilibrium, by the equality of micro(1)(soln). If there are several subsystems in a gravitational field, at any fixed height, microi will have the same value in each subsystem into which substance i can get, and microi + M(i)gh is constant throughout the entire system. In a solution, there is no mechanism by which solvent and solute molecules could sustain different pressures. Both the solvent and solute are always under identical pressures in a region of solution, namely, the pressure of the solution in that region. Since nature does not know which component we call the solvent and which the solute, equations should be symmetric in the two (acknowledging that the nonvolatile component, if any, is commonly chosen to be solute). Simple molecular pictures illustrate what is happening to cause pressure (positive or negative) in liquids, vapor pressure of liquids, and the various colligative properties of solutions. The only effect of solute involved in these properties is that it dilutes the solvent, with the resulting increase in S and decrease in micro(1)(soln). Water can be driven passively up a tree to enormous heights by the difference between its chemical potential in the roots and the ambient air. There is nothing mysterious about the molecular bases for any of these phenomena. Biologists can use the well-understood pictures of these phenomena with confidence to study what is happening in the complicated living systems they consider.

  13. Solute diffusion in liquid metals

    NASA Technical Reports Server (NTRS)

    Bhat, B. N.

    1973-01-01

    A gas model of diffusion in liquid metals is presented. In this model, ions of liquid metals are assumed to behave like the molecules in a dense gas. Diffusion coefficient of solute is discussed with reference to its mass, ionic size, and pair potential. The model is applied to the case of solute diffusion in liquid silver. An attempt was made to predict diffusion coefficients of solutes with reasonable accuracy.

  14. Colligative properties of simple solutions.

    PubMed

    Andrews, F C

    1976-11-01

    Vapor pressure lowering, osmotic pressure, boiling point elevation, and freezing point depression are all related quantitatively to the decrease in micro(1)(soln) upon the addition of solute in forming a solution. In any equilibrium system, regardless of whether it is in a gravitational field or whether it contains walls, semipermeable membranes, phase transitions, or solutes, all equilibria are maintained locally, in the small region of the equilibrium, by the equality of micro(1)(soln). If there are several subsystems in a gravitational field, at any fixed height, microi will have the same value in each subsystem into which substance i can get, and microi + M(i)gh is constant throughout the entire system. In a solution, there is no mechanism by which solvent and solute molecules could sustain different pressures. Both the solvent and solute are always under identical pressures in a region of solution, namely, the pressure of the solution in that region. Since nature does not know which component we call the solvent and which the solute, equations should be symmetric in the two (acknowledging that the nonvolatile component, if any, is commonly chosen to be solute). Simple molecular pictures illustrate what is happening to cause pressure (positive or negative) in liquids, vapor pressure of liquids, and the various colligative properties of solutions. The only effect of solute involved in these properties is that it dilutes the solvent, with the resulting increase in S and decrease in micro(1)(soln). Water can be driven passively up a tree to enormous heights by the difference between its chemical potential in the roots and the ambient air. There is nothing mysterious about the molecular bases for any of these phenomena. Biologists can use the well-understood pictures of these phenomena with confidence to study what is happening in the complicated living systems they consider. PMID:17818408

  15. Extraordinary vacuum black string solutions

    SciTech Connect

    Kim, Hyeong-Chan; Lee, Jungjai

    2008-01-15

    In addition to the boosted static solution there are two other classes of stationary stringlike solutions of the vacuum Einstein equation in (4+1) dimensions. Each class is characterized by three parameters of mass, tension, and momentum flow along the fifth coordinate. We analyze the metric properties of one of the two classes, which was previously assumed to be naked singular, and show that the solution spectrum contains black string and wormhole in addition to the known naked singularity as the momentum flow to mass ratio increases. Interestingly, there does not exist new zero momentum solution in these cases.

  16. Enhanced safeguards via solution monitoring

    SciTech Connect

    Burr, T.; Wangen, L.

    1996-09-01

    Solution monitoring is defined as the essentially continuous monitoring of solution level, density, and temperature in all tanks in the process that contain, or could contain, safeguards-significant quantities of nuclear material. This report describes some of the enhancements that solution monitoring could make to international safeguards. The focus is on the quantifiable benefits of solution monitoring, but qualitatively, solution monitoring can be viewed as a form of surveillance. Quantitatively, solution monitoring can in some cases improve diversion detection probability. For example, the authors show that under certain assumptions, solution monitoring can be used to reduce the standard deviation of the annual material balance, {sigma}{sub MB}, from approximately 17 kg to approximately 4 kg. Such reduction in {sigma}{sub MB} will not always be possible, as they discuss. However, in all cases, solution monitoring would provide assurance that the measurement error models are adequate so that one has confidence in his estimate of {sigma}{sub MB}. Some of the results in this report were generated using data that were simulated with prototype solution monitoring software that they are developing. An accompanying document describes that software.

  17. The double-dust solution

    NASA Astrophysics Data System (ADS)

    Kramer, D.

    2002-04-01

    An exact solution describing the static gravitational field produced by the superposition of two dust beams of equal mass density but opposite propagation direction is given in a closed form. In particular, the cylindrically symmetric situation is considered in which the two dust components move on trajectories screwing around the axis. In this case, the solution can be matched to the Levi-Civita external vacuum solution at any value of the radial coordinate. The axis is regular and the mass density is positive everywhere in the interior region of the global solution. The dominant energy condition is satisfied.

  18. CHLORIDE WASHER PERFORMACE TESTING

    SciTech Connect

    Coughlin, J; David Best, D; Robert Pierce, R

    2007-11-30

    Testing was performed to determine the chloride (Cl-) removal capabilities of the Savannah River National Laboratory (SRNL) designed and built Cl- washing equipment intended for HB-Line installation. The equipment to be deployed was tested using a cerium oxide (CeO2) based simulant in place of the 3013 plutonium oxide (PuO2) material. Two different simulant mixtures were included in this testing -- one having higher Cl- content than the other. The higher Cl- simulant was based on K-Area Interim Surveillance Inspection Program (KIS) material with Cl- content approximately equal to 70,000 ppm. The lower Cl- level simulant was comparable to KIS material containing approximately 8,000-ppm Cl- content. The performance testing results indicate that the washer is capable of reducing the Cl- content of both surrogates to below 200 ppm with three 1/2-liter washes of 0.1M sodium hydroxide (NaOH) solution. Larger wash volumes were used with similar results - all of the prescribed test parameters consistently reduced the Cl- content of the surrogate to a value below 200 ppm Cl- in the final washed surrogate material. The washer uses a 20-micron filter to retain the surrogate solids. Tests showed that 0.16-0.41% of the insoluble fraction of the starting mass passed through the 20-micron filter. The solids retention performance indicates that the fissile masses passing through the 20-micron filter should not exceed the waste acceptance criteria for discard in grout to TRU waste. It is recommended that additional testing be pursued for further verification and optimization purposes. It is likely that wash volumes smaller than those tested could still reduce the Cl- values to acceptable levels. Along with reduced wash volumes, reuse of the third wash volume (in the next run processed) should be tested as a wash solution minimization plan. A 67% reduction in the number of grouted paint pails could be realized if wash solution minimization testing returned acceptable results.

  19. Fidelity of the Integrated Force Method Solution

    NASA Technical Reports Server (NTRS)

    Hopkins, Dale; Halford, Gary; Coroneos, Rula; Patnaik, Surya

    2002-01-01

    The theory of strain compatibility of the solid mechanics discipline was incomplete since St. Venant's 'strain formulation' in 1876. We have addressed the compatibility condition both in the continuum and the discrete system. This has lead to the formulation of the Integrated Force Method. A dual Integrated Force Method with displacement as the primal variable has also been formulated. A modest finite element code (IFM/Analyzers) based on the IFM theory has been developed. For a set of standard test problems the IFM results were compared with the stiffness method solutions and the MSC/Nastran code. For the problems IFM outperformed the existing methods. Superior IFM performance is attributed to simultaneous compliance of equilibrium equation and compatibility condition. MSC/Nastran organization expressed reluctance to accept the high fidelity IFM solutions. This report discusses the solutions to the examples. No inaccuracy was detected in the IFM solutions. A stiffness method code with a small programming effort can be improved to reap the many IFM benefits when implemented with the IFMD elements. Dr. Halford conducted a peer-review on the Integrated Force Method. Reviewers' response is included.

  20. Finite volume solution of spherical dynamo problems

    NASA Astrophysics Data System (ADS)

    Harder, H.; Hansen, U.

    2003-04-01

    Presently, all existing numerical models of the geodynamo have been calculated by a spectral approach. Certainly a spectral method is ideally suited for the case of high or moderate Ekman number Ek. However, no solutions have been obtained for the regime of an Ekman number below Ek=10-5 to 10-6, which is relevant for the Earth's outer core. Therefore we are currently developing a finite volume method to simulate the geodynamo. Since a local method, like finite volume, is much better suited for massively parallel computation compared to a spectral method, we expect that we can use higher resolution models than previously possible. In addition, the finite volume approach allows an implicit calculation of the dominant Coriolis term in the low Ekman number regime. The development of the thermal and Navier Stokes solvers has been completed. Therefore we will discuss several test solutions of the magnetic induction equation. In addition, first solutions of a fully coupled dynamo model will be presented and compared to similiar spectral solutions.

  1. High conductivity electrolyte solutions and rechargeable cells incorporating such solutions

    DOEpatents

    Angell, Charles Austen; Zhang, Sheng-Shui; Xu, Kang

    1998-01-01

    This invention relates generally to electrolyte solvents for use in liquid or rubbery polymer electrolyte solutions as are used, for example, in electrochemical devices. More specifically, this invention relates to sulfonyl/phospho-compound electrolyte solvents and sulfonyl/phospho-compound electrolyte solutions incorporating such solvents.

  2. High conductivity electrolyte solutions and rechargeable cells incorporating such solutions

    DOEpatents

    Angell, C.A.; Zhang, S.S.; Xu, K.

    1998-10-20

    This invention relates generally to electrolyte solvents for use in liquid or rubbery polymer electrolyte solutions as are used, for example, in electrochemical devices. More specifically, this invention relates to sulfonyl/phospho-compound electrolyte solvents and sulfonyl/phospho-compound electrolyte solutions incorporating such solvents. 9 figs.

  3. Process for defoaming acid gas scrubbing solutions and defoaming solutions

    SciTech Connect

    Ernst, E.R.; Robbins, M.L.

    1980-06-17

    The foam in acid gas scrubbing solutions created during an acid gas scrubbing process is reduced or eliminated by the addition of certain polyoxyethylene polyoxypropylene block copolymers as defoaming agents. The defoaming agents are particularly effective when the acid gas scrubbing solution contains an amine having a large hydrophobic moiety.

  4. Net Test

    2001-09-01

    Nettest is a secure, real-time network utility. The nettest framework is designed to incorporate existing and new network tests, and be run as a daemon or an interactive process. Requests for network tests are received via a SSL connection or the user interface and are authorized using a ACL list (in the future authorization using Akenti will also be supported). For tests that require coordination between the two ends of the test, Nettest establishes anmore » SSL connection to accomplish this coordination. A test between two remote computers can be requested via the user interlace if the Nettest daemon is running on both remote machines and the user is authorized. Authorization for the test is through a chain of trust estabtished by the nettest daemons. Nettest is responsible for determining if the test request is authorized, but it does nothing further to secure the test once the test is running. Currently the Nettest framework incorporates lperf-vl.2, a simple ping type test, and a tuned TCP test that uses a given required throughput and ping results to determine the round trip time to set a buffer size (based on the delay bandwidth product) and then performs an iperf TCP throughput test. Additional network test tools can be integrated into the Nettest framework in the future.« less

  5. Solution processed aluminum paper for flexible electronics.

    PubMed

    Lee, Hye Moon; Lee, Ha Beom; Jung, Dae Soo; Yun, Jung-Yeul; Ko, Seung Hwan; Park, Seung Bin

    2012-09-11

    As an alternative to vacuum deposition, preparation of highly conductive papers with aluminum (Al) features is successfully achieved by the solution process consisting of Al precursor ink (AlH(3){O(C(4)H(9))(2)}) and low temperature stamping process performed at 110 °C without any serious hydroxylation and oxidation problems. Al features formed on several kinds of paper substrates (calendar, magazine, and inkjet printing paper substrates) are less than ~60 nm thick, and their electrical conductivities were found to be as good as thermally evaporated Al film or even better (≤2 Ω/□). Strong adhesion of Al features to paper substrates and their excellent flexibility are also experimentally confirmed by TEM observation and mechanical tests, such as tape and bending tests. The solution processed Al features on paper substrates show different electrical and mechanical performance depending on the paper type, and inkjet printing paper is found to be the best substrate with high and stable electrical and mechanical properties. The Al conductive papers produced by the solution process may be applicable in disposal paper electronics.

  6. Trial of an experimental castor oil solution for cleaning dentures.

    PubMed

    Andrade, Ingrid Machado de; Andrade, Kelly Machado de; Pisani, Marina Xavier; Silva-Lovato, Cláudia Helena; de Souza, Raphael Freitas; Paranhos, Helena de Freitas Oliveira

    2014-01-01

    Denture hygiene is essential because denture biofilm is involved in oral infections and systemic diseases. Although there are chemical agents available on the market, none of them have ideal properties and research on such products is still necessary. The aim of this study was to evaluate the efficacy of a castor bean (Ricinus communis)-based solution for removing denture biofilm, compared to two traditional products (sodium hypochlorite and alkaline peroxide). Fifty maxillary complete denture wearers were instructed to brush their dentures after meals and to immerse their dentures once a day in the following solutions: Saline (20 min; control), Polident alkaline peroxide (3 min), NaOCl (20 min) and 2% castor oil solution (20 min). Participants used each solution for a period of 7 consecutive days, according to a random sequence. After each period, the internal surfaces of maxillary complete dentures were stained with a disclosing solution (1% neutral red), photographed and the disclosed biofilm was quantified with the aid of specific software. The influence of treatments on results was verified by the Friedman test (α=0.05). Tested solutions presented significant difference (Fr=51.67; p<0.001). Saline and NaOCl were significantly different (median: 2.0% and 0.0%) whereas Polident and castor oil presented intermediate results (median: 1.0% and 1.5%, respectively). It can be concluded that the castor oil solution tested in this study was comparable to alkaline peroxide in terms of efficiency in denture biofilm removal.

  7. Larvicidal activity and influence of Bacillus thuringiensis var. israelensis on Aedes albopictus oviposition in ovitraps during a two-week check interval protocol.

    PubMed

    Carrieri, Marco; Masetti, Antonio; Albieri, Alessandro; Maccagnani, Bettina; Bellini, Romeo

    2009-06-01

    Toxicity persistence of Bacillus thuringiensis var. israelensis (Bti) was evaluated in laboratory and field trials to develop a new protocol for Aedes albopictus monitoring. In the laboratory, the residual toxicity of 5 Bti formulations was compared using the percentage mortality at days 4, 8, 12, and 16 of Culex pipiens larvae exposed for 24 h to Bti treatments. The results showed a good performance of all tested formulations (>97% mortality at day 14, for all the formulations), but only Vectobac 12AS at the concentration of 1 ml/liter showed an efficacy of 100% for 2 wk. A field study was designed to test the effect of Bti on the ovitrap check interval or influence of ovipositional response of gravid Ae. albopictus females. Three different ovitrap treatments were used: ovitraps with tap water checked weekly; ovitraps with tap water checked every 2 wk; ovitraps with Bti (Vectobac 12AS, dose of 1 ml/liter) checked every 2 wk. Our study demonstrated that in the ovitrap, the toxic action of a 1% solution of Bti was maintained for at least 14 days with mortality of 100% and that rainfall did not seem to negatively influence the residual action of Bti. Therefore the probability that the larvae may complete the developmental cycle in ovitraps with Bti seems to be very low. The oviposition activity index showed that Bti enhances the oviposition rate of Ae. albopictus by 17.4%. PMID:19653496

  8. Prematurely terminated slug tests

    SciTech Connect

    Karasaki, K. )

    1990-07-01

    A solution of the well response to a prematurely terminated slug test (PTST) is presented. The advantages of a PTST over conventional slug tests are discussed. A systematized procedure of a PTST is proposed, where a slug test is terminated in the midpoint of the flow point, and the subsequent shut-in data is recorded and analyzed. This method requires a downhole shut-in device and a pressure transducer, which is no more than the conventional deep-well slug testing. As opposed to slug tests, which are ineffective when a skin is present, more accurate estimate of formation permeability can be made using a PTST. Premature termination also shortens the test duration considerably. Because in most cases no more information is gained by completing a slug test to the end, the author recommends that conventional slug tests be replaced by the premature termination technique. This study is part of an investigation of the feasibility of geologic isolation of nuclear wastes being carried out by the US Department of Energy and the National Cooperative for the Storage of Radioactive Waste of Switzerland.

  9. Pertussis Tests

    MedlinePlus

    ... as: Whooping Cough Tests Formal name: Bordetella pertussis Culture; Bordetella pertussis by PCR; Bordetella pertussis Antibodies (IgA, ... outbreak, at least one case be confirmed using culture. Culture – this test was the "gold standard" for ...

  10. Electrolytes Test

    MedlinePlus

    ... include other tests such as BUN , creatinine , and glucose . Electrolyte measurements may be used to help investigate conditions that cause electrolyte imbalances such as dehydration , kidney disease , lung diseases , or heart conditions . Repeat testing may then ...

  11. Sweat Test

    MedlinePlus

    ... insipidus , and hypothyroidism . Edema can result in a false-negative result. The sweat chloride test should only ... kind of testing. Otherwise, problems in accuracy, including false negatives due to poor collection technique, can arise. ^ ...

  12. Malnutrition Tests

    MedlinePlus

    ... be limited. Home Visit Global Sites Search Help? Malnutrition Share this page: Was this page helpful? Overview | Symptoms | Tests | Treatment | Related Pages Tests Malnutrition will often be noticeable to the doctor's trained ...

  13. Kidney Tests

    MedlinePlus

    ... taking out waste products and making urine. Kidney tests check to see how well your kidneys are working. They include blood, urine, and imaging tests. Early kidney disease usually does not have signs ...

  14. Procalcitonin Test

    MedlinePlus

    ... tests: C-Reactive Protein , Complete Blood Count , Blood Culture , CSF Analysis ... test is relatively new, but its utilization is increasing. Recent studies have shown that it has promise in helping ...

  15. Bilirubin Test

    MedlinePlus

    ... test in conjunction with other laboratory tests ( alkaline phosphatase , aspartate aminotransferase , alanine aminotransferase ) when someone shows signs ... Gilbert syndrome, due to low levels of the enzyme that produces conjugated bilirubin If conjugated (direct) bilirubin ...

  16. Tensilon test

    MedlinePlus

    Myasthenia gravis-tensilon ... Tensilon tests to help tell the difference between myasthenia gravis and other conditions. ... The test helps: Diagnose myasthenia gravis Tell the difference ... conditions Monitor treatment with oral anticholinesterase drugs ...

  17. HPV Test

    MedlinePlus

    ... test for wider range of HPV types. 2009 Mar 13. US Food and Drug Administration. Available online ... approves two DNA tests to detect HPV. 2009 Mar 17. Infectious Disease News. Available online at http:// ...

  18. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1988-01-01

    Describes three flame test demonstrations including "Student-Presented Demonstrations on the Colors of Transition Metal Complexes,""A Flame Test Demonstration Device," and "Vivid Flame Tests." Preparation and procedures are discussed. Included in the first demonstration is an evaluation scheme for grading student demonstrations. (CW)

  19. Schilling test

    MedlinePlus

    Vitamin B12 absorption test ... This test may be done in four different stages to find the cause of a low vitamin B12 level. ... can absorb vitamin B12. Stage II of the test can tell whether a low vitamin B12 level ...

  20. Chemical evaluation of soil-solution in acid forest soils

    USGS Publications Warehouse

    Lawrence, G.B.; David, M.B.

    1996-01-01

    Soil-solution chemistry is commonly studied in forests through the use of soil lysimeters.This approach is impractical for regional survey studies, however, because lysimeter installation and operation is expensive and time consuming. To address these problems, a new technique was developed to compare soil-solution chemistry among red spruce stands in New York, Vermont, New Hampshire, Maine. Soil solutions were expelled by positive air pressure from soil that had been placed in a sealed cylinder. Before the air pressure was applied, a solution chemically similar to throughfall was added to the soil to bring it to approximate field capacity. After the solution sample was expelled, the soil was removed from the cylinder and chemically analyzed. The method was tested with homogenized Oa and Bs horizon soils collected from a red spruce stand in the Adirondack Mountains of New York, a red spruce stand in east-central Vermont, and a mixed hardwood stand in the Catskill Mountains of New York. Reproducibility, effects of varying the reaction time between adding throughfall and expelling soil solution (5-65 minutes) and effects of varying the chemical composition of added throughfall, were evaluated. In general, results showed that (i) the method was reproducible (coefficients of variation were generally < 15%), (ii) variations in the length of reaction-time did not affect expelled solution concentrations, and (iii) adding and expelling solution did not cause detectable changes in soil exchange chemistry. Concentrations of expelled solutions varied with the concentrations of added throughfall; the lower the CEC, the more sensitive expelled solution concentrations were to the chemical concentrations of added throughfall. Addition of a tracer (NaBr) showed that the expelled solution was a mixture of added solution and solution that preexisted in the soil. Comparisons of expelled solution concentrations with concentrations of soil solutions collected by zero-tension and

  1. Analytical solutions for the coefficient of variation of the volume-averaged solute concentration in heterogeneous aquifers

    NASA Astrophysics Data System (ADS)

    Kabala, Z. J.

    1997-08-01

    Under the assumption that local solute dispersion is negligible, a new general formula (in the form of a convolution integral) is found for the arbitrary k-point ensemble moment of the local concentration of a solute convected in arbitrary m spatial dimensions with general sure initial conditions. From this general formula new closed-form solutions in m=2 spatial dimensions are derived for 2-point ensemble moments of the local solute concentration for the impulse (Dirac delta) and Gaussian initial conditions. When integrated over an averaging window, these solutions lead to new closed-form expressions for the first two ensemble moments of the volume-averaged solute concentration and to the corresponding concentration coefficients of variation (CV). Also, for the impulse (Dirac delta) solute concentration initial condition, the second ensemble moment of the solute point concentration in two spatial dimensions and the corresponding CV are demonstrated to be unbound. For impulse initial conditions the CVs for volume-averaged concentrations axe compared with each other for a tracer from the Borden aquifer experiment. The point-concentration CV is unacceptably large in the whole domain, implying that the ensemble mean concentration is inappropriate for predicting the actual concentration values. The volume-averaged concentration CV decreases significantly with an increasing averaging volume. Since local dispersion is neglected, the new solutions should be interpreted as upper limits for the yet to be derived solutions that account for local dispersion; and so should the presented CVs for Borden tracers. The new analytical solutions may be used to test the accuracy of Monte Carlo simulations or other numerical algorithms that deal with the stochastic solute transport. They may also be used to determine the size of the averaging volume needed to make a quasi-sure statement about the solute mass contained in it.

  2. Interior Design: Challenges and Solutions.

    ERIC Educational Resources Information Center

    School Planning and Management, 1999

    1999-01-01

    Presents solutions to architectural challenges in school interior design; these solutions made the indoor environments more conducive and attractive for learning. Addresses four challenges: making a long corridor look less like a tunnel; maintaining tradition and minimizing cost in a new athletic facility; designing a kindergarten that is secure…

  3. Big Ideas and Small Solutions

    ERIC Educational Resources Information Center

    Tennant, Roy

    2004-01-01

    Small solutions solve discrete, well-bounded problems and can be pieces of larger solutions. They can move things forward by mixing and matching available components in new and previously unimagined ways. A number of innovations, which at first glance are completely unrelated, can come together and create important synergics. This article…

  4. Analytic solutions of inverse heat conduction problems

    NASA Astrophysics Data System (ADS)

    Al-Najem, N. M.

    A direct analytic approach is systematically developed for solving inverse heat conduction problems in multi-dimensional finite regions. The inverse problems involve the determination of the surface conditions from the knowledge of the time variation of the temperature at an interior point in the region. In the present approach, the unknown surface temperature is represented by a polynominal in time and a splitting-up procedure is employed to develop a rapidly converging inverse solution. The least square technique is then utilized to estimate the unknown parameters associated with the solution. The method is developed first for the analysis of one-dimensional cases, and then it is generalized to handle two- and three-dimensional situations. It provides an efficient, stable and systematic approach for inverse heat condition problems. The stability and accuracy of the current method of analysis are demonstrated by several numerical examples chosen to provide a very strict test.

  5. Allergy Testing.

    PubMed

    Tourlas, Konstantinos; Burman, Deepa

    2016-09-01

    Allergic diseases are common in outpatient primary care. Allergy testing can guide management to determine allergy as a cause of symptoms and target therapeutic interventions. This article provides a review of common methods of allergy testing available so that physicians may counsel and refer patients appropriately. Immediate-type hypersensitivity skin tests can be used for airborne allergens, foods, insect stings, and penicillin. Radioallergosorbent testing can be used to evaluate immediate-type hypersensitivity. Delayed-type hypersensitivity or patch-type skin tests are used in patients with suspected contact dermatitis. PMID:27545728

  6. Coupled Fluid Energy Solute Transport

    1992-02-13

    CFEST is a Coupled Fluid, Energy, and Solute Transport code for the study of a multilayered, nonisothermal ground-water system. It can model discontinuous as well as continuous layers, time-dependent and constant source/sinks, and transient as well as steady-state flow. The finite element method is used for analyzing isothermal and nonisothermal events in a confined aquifer system. Only single-phase Darcian flow is considered. In the Cartesian coordinate system, flow in a horizontal plane, in a verticalmore » plane, or in a fully three-dimensional region can be simulated. An option also exists for the axisymmetric analysis of a vertical cross section. The code employs bilinear quadrilateral elements in all two dimensional analyses and trilinear quadrilateral solid elements in three dimensional simulations. The CFEST finite element formulation can approximate discontinuities, major breaks in slope or thickness, and fault zones in individual hydrogeologic units. The code accounts for heterogeneity in aquifer permeability and porosity and accommodates anisotropy (collinear with the Cartesian coordinates). The variation in the hydraulic properties is described on a layer-by-layer basis for the different hydrogeologic units. Initial conditions can be prescribed hydraulic head or pressure, temperature, or concentration. CFEST can be used to support site, repository, and waste package subsystem assessments. Some specific applications are regional hydrologic characterization; simulation of coupled transport of fluid, heat, and salinity in the repository region; consequence assessment due to natural disruption or human intrusion scenarios in the repository region; flow paths and travel-time estimates for transport of radionuclides; and interpretation of well and tracer tests.« less

  7. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1986-01-01

    Outlines a simple, inexpensive way of demonstrating electroplating using the reaction between nickel ions and copper metal. Explains how to conduct a demonstration of the electrolysis of water by using a colored Na2SO4 solution as the electrolyte so that students can observe the pH changes. (TW)

  8. Tested Demonstrations

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1976-01-01

    Describes two demonstrations: one that illustrates the attainment of equilibrium in first-order reactions by changing the volumes of two beakers of water at a specified rate, and another that illustrates the role of indicators in showing pH changes in buffer solutions. (MLH)

  9. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1983-01-01

    Presents background information and procedures for producing sequential color reactions. With proper selection of pH indicator dyes, most school colors can be produced after mixing colorless solutions. Procedures for producing white/purple and red/white/blue colors are outlined. Also outlines preparation of 2, 4, 2', 4', 4"-pentamethoxytriphenyl…

  10. Scale control in urea solutions

    SciTech Connect

    Dubin, L.; Diep, D.V.

    1997-08-01

    Legislation to control NO{sub x} emissions, one cause of acid rain and ozone induced smog, has created an impetus to control NO{sub x} emissions. Selective Non Catalytic Reduction (SNCR) using urea chemistry is utilized to control NO{sub x} emissions from boilers, municipal waste incinerators, refinery furnaces, recovery boilers, utilities and other stationary combustion sources. Control requires injecting urea-based solutions into the flue gas at specified temperatures. Urea solutions accelerate CaCO{sub 3} precipitation in industrial waters used for dilution, and thereby interfere with proper application of the urea solution. The negative effect of urea solutions on hardness stability is discussed as well as how CaCO{sub 3} precipitation in urea solution can be controlled by suitable scale inhibitors.

  11. TREATMENT OF AMMONIUM NITRATE SOLUTIONS

    DOEpatents

    Boyer, T.W.; MacHutchin, J.G.; Yaffe, L.

    1958-06-10

    The treatment of waste solutions obtained in the processing of neutron- irradiated uranium containing fission products and ammonium nitrate is described. The object of this process is to provide a method whereby the ammonium nitrate is destroyed and removed from the solution so as to permit subsequent concentration of the solution.. In accordance with the process the residual nitrate solutions are treated with an excess of alkyl acid anhydride, such as acetic anhydride. Preferably, the residual nitrate solution is added to an excess of the acetic anhydride at such a rate that external heat is not required. The result of this operation is that the ammonium nitrate and acetic anhydride react to form N/sub 2/ O and acetic acid.

  12. Analytical testing

    NASA Technical Reports Server (NTRS)

    Flannelly, W. G.; Fabunmi, J. A.; Nagy, E. J.

    1981-01-01

    Analytical methods for combining flight acceleration and strain data with shake test mobility data to predict the effects of structural changes on flight vibrations and strains are presented. This integration of structural dynamic analysis with flight performance is referred to as analytical testing. The objective of this methodology is to analytically estimate the results of flight testing contemplated structural changes with minimum flying and change trials. The category of changes to the aircraft includes mass, stiffness, absorbers, isolators, and active suppressors. Examples of applying the analytical testing methodology using flight test and shake test data measured on an AH-1G helicopter are included. The techniques and procedures for vibration testing and modal analysis are also described.

  13. Possible solution of the Coriolis attenuation problem

    SciTech Connect

    Protopapas, P.; Klein, A.

    1997-04-01

    The most consistently useful simple model for the study of odd deformed nuclei, the particle-rotor model (strong-coupling limit of the core-particle coupling model) has nevertheless been beset by a long-standing problem: It is necessary in many cases to introduce an {ital ad hoc} parameter that reduces the size of the Coriolis interaction coupling the collective and single-particle motions. Of the numerous suggestions put forward for the origin of this supplementary interaction, none of those actually tested by calculations has been accepted as the solution of the problem. In this paper we seek a solution for the difficulty within the framework of a general formalism that starts from the spherical shell model and is capable of treating an arbitrary linear combination of multipole and pairing forces. With the restriction of the interaction to the familiar sum of a quadrupole multipole force and a monopole pairing force, we have previously studied a semimicroscopic version of the formalism whose framework is nevertheless more comprehensive than any previously applied to the problem. We obtained solutions for low-lying bands of several strongly deformed odd rare-earth nuclei and found good agreement with experiment, except for an exaggerated staggering of levels for K=(1)/(2) bands, which can be understood as a manifestation of the Coriolis attenuation problem. We argue that within the formalism utilized, the only way to improve the physics is to add interactions to the model Hamiltonian. We verify that by adding a magnetic dipole interaction of essentially fixed strength, we can fit the K=(1)/(2) bands without destroying the agreement with other bands. In addition we show that our solution also fits {sup 163}Er, a classic test case of Coriolis attenuation that we had not previously studied. {copyright} {ital 1997} {ital The American Physical Society}

  14. The Tail Suspension Test

    PubMed Central

    Terrillion, Chantelle E.; Piantadosi, Sean C.; Bhat, Shambhu; Gould, Todd D.

    2012-01-01

    The tail-suspension test is a mouse behavioral test useful in the screening of potential antidepressant drugs, and assessing of other manipulations that are expected to affect depression related behaviors. Mice are suspended by their tails with tape, in such a position that it cannot escape or hold on to nearby surfaces. During this test, typically six minutes in duration, the resulting escape oriented behaviors are quantified. The tail-suspension test is a valuable tool in drug discovery for high-throughput screening of prospective antidepressant compounds. Here, we describe the details required for implementation of this test with additional emphasis on potential problems that may occur and how to avoid them. We also offer a solution to the tail climbing behavior, a common problem that renders this test useless in some mouse strains, such as the widely used C57BL/6. Specifically, we prevent tail climbing behaviors by passing mouse tails through a small plastic cylinder prior to suspension. Finally, we detail how to manually score the behaviors that are manifested in this test. PMID:22315011

  15. Radiation induced degradation of ketoprofen in dilute aqueous solution

    NASA Astrophysics Data System (ADS)

    Illés, Erzsébet; Takács, Erzsébet; Dombi, András; Gajda-Schrantz, Krisztina; Gonter, Katalin; Wojnárovits, László

    2012-09-01

    The intermediates and final products of ketoprofen degradation were investigated in 0.4 mmol dm-3 solution by pulse radiolysis and gamma radiolysis. For observation of final products UV-vis spectrophotometry and HPLC separation with diode array detection were used, and for identification MS was used. The reactions of •OH lead to hydroxycyclohexadienyl type radical intermediates, in their further reactions hydroxylated derivatives of ketoprofen form as final products. The hydrated electron is scavenged by the carbonyl oxygen and the electron adduct protonates to ketyl radical •OH is more effective in decomposing ketoprofen than hydrated electron. Chemical oxygen demand and total organic carbon content measurements on irradiated aerated solutions showed that using irradiation technology ketoprofen can be mineralised. The initial toxicity of the solution monitored by the Daphnia magna test steadily decreases with irradiation. Using 5 kGy dose no toxicity of the solution was detected with this test.

  16. Use of azithromycin ophthalmic solution in the treatment of chronic mixed anterior blepharitis.

    PubMed

    John, Thomas; Shah, Ami A

    2008-01-01

    We tested the efficacy of azithromycin ophthalmic solution for the treatment of chronic mixed anterior blepharitis. The findings suggest that patients with chronic mixed anterior blepharitis can be more effectively treated with azithromycin ophthalmic solution than erythromycin ophthalmic ointment. Patients treated with azithromycin ophthalmic solution show an extraordinary clinical response with shorter treatment duration.

  17. Numerical solution of two dimensional time fractional-order biological population model

    NASA Astrophysics Data System (ADS)

    Prakash, Amit; Kumar, Manoj

    2016-06-01

    In this work, we provide an approximate solution of a parabolic fractional degenerate problem emerging in a spatial diffusion of biological population model using a fractional variational iteration method (FVIM). Four test illustrations are used to show the proficiency and accuracy of the projected scheme. Comparisons between exact solutions and numerical solutions are presented for different values of fractional order α.

  18. Solute-Solvent Energetics Based on Proximal Distribution Functions.

    PubMed

    Ou, Shu-Ching; Pettitt, B Montgomery

    2016-08-25

    We consider the hydration structure and thermodynamic energetics of solutes in aqueous solution. On the basis of the dominant local correlation between the solvent and the chemical nature of the solute atoms, proximal distribution functions (pDF) can be used to quantitatively estimate the hydration pattern of the macromolecules. We extended this technique to study the solute-solvent energetics including the van der Waals terms representing excluded volume and tested the method with butane and propanol. Our results indicate that the pDF-reconstruction algorithm can reproduce van der Waals solute-solvent interaction energies to useful kilocalorie per mole accuracy. We subsequently computed polyalanine-water interaction energies for a variety of conformers, which also showed agreement with the simulated values. PMID:27095487

  19. Effects of additives on alum hematoxylin staining solutions.

    PubMed

    Clark, G

    1975-03-01

    All additives tested (ethyl alcohol, glycerine, chloral hydrate, ethylene and propylene glycol, and citric, malonic and maleic acids) in varying degrees limited the conversion of hematein to insoluble compounds. Peak absorbances increased slightly in hematoxylin solutions containing citric, malonic and maleic acids, but decreased with other additives, and in controls. After four months storage the absorbance in all solutions increased about 50%, acidity increased and staining effectiveness increased.

  20. Remote photoacoustic measurements in aqueous solutions using an optical fiber

    SciTech Connect

    Russo, R.E. ); Rojas, D. ); Robouch, P.; Silva, R.J. )

    1990-12-01

    A photoacoustic spectrometer was developed for remote optical absorption measurements in aqueous solutions using an 85-m optical fiber to deliver pulsed tunable dye laser radiation to a sample cuvette located in a glove box. The spectrometer was tested using aqueous solutions of praseodymium ions. Beer's law was verified down to a concentration of 8{times}10{sup {minus}6}M for an equivalent absorptance of 3.2{times}10{sup {minus}5} cm{sup {minus}1}.

  1. A mineral separation procedure using hot Clerici solution

    USGS Publications Warehouse

    Rosenblum, Sam

    1974-01-01

    Careful boiling of Clerici solution in a Pyrex test tube in an oil bath is used to float minerals with densities up to 5.0 in order to obtain purified concentrates of monazite (density 5.1) for analysis. The "sink" and "float" fractions are trapped in solidified Clerici salts on rapid chilling, and the fractions are washed into separate filter papers with warm water. The hazardous nature of Clerici solution requires unusual care in handling.

  2. Effect of chlorides on solution corrosivity of methyldiethanolamine (MDEA) solutions

    SciTech Connect

    Rooney, P.C.; Bacon, T.R.; DuPart, M.S.; Willbanks, K.D.

    1997-08-01

    Solution corrosivity of MDEA/water solutions containing added HCl or NaCl have been measured by weight loss coupons at 250 F and by linear polarization resistance (LPR) at 208 F using carbon steel, 304SS, 316SS and 410SS. General corrosion as well as pitting or crevice corrosion tendencies were recorded for each species. Based on these results, recommendations are made for chlorides in MDEA that minimizes corrosion in gas treating operations.

  3. Rubella Test

    MedlinePlus

    Advertisement Proceeds from website advertising help sustain Lab Tests Online. AACC is a not-for-profit organization ... for trustworthy health information. Verify Compliance . Produced by Advertisement

  4. Glucose Tests

    MedlinePlus

    Advertisement Proceeds from website advertising help sustain Lab Tests Online. AACC is a not-for-profit organization ... for trustworthy health information. Verify Compliance . Produced by Advertisement

  5. Cholesterol Test

    MedlinePlus

    Advertisement Proceeds from website advertising help sustain Lab Tests Online. AACC is a not-for-profit organization ... for trustworthy health information. Verify Compliance . Produced by Advertisement

  6. Performance tests.

    PubMed Central

    Wetherell, A

    1996-01-01

    This paper discusses the use of psychological performance tests to assess the effects of environmental stressors. The large number and the variety of performance tests are illustrated, and the differences between performance tests and other psychological tests are described in terms of their design, construction, use, and purpose. The stressor emphasis is on the effects of drugs since that is where most performance tests have found their main application, although other stressors, e.g., fatigue, toxic chemicals, are mentioned where appropriate. Diazepam is used as an example. There is no particular performance emphasis since the tests are intended to have wide applicability. However, vehicle-driving performance is discussed because it has been the subject of a great deal of research and is probably one of the most important areas of application. Performance tests are discussed in terms of the four main underlying models--factor analysis, general information processing, multiple resource and strategy models, and processing-stage models--and in terms of their psychometric properties--sensitivity, reliability, and content, criterion, construct, and face validity. Some test taxonomies are presented. Standardization is also discussed with reference to the reaction time, mathematical processing, memory search, spatial processing, unstable tracking, verbal processing, and dual task tests used in the AGARD STRES battery. Some comments on measurement strengths and appropriate study designs and methods are included. PMID:9182033

  7. Serotonin Test

    MedlinePlus

    Advertisement Proceeds from website advertising help sustain Lab Tests Online. AACC is a not-for-profit organization ... for trustworthy health information. Verify Compliance . Produced by Advertisement

  8. Software testing

    NASA Astrophysics Data System (ADS)

    Price-Whelan, Adrian M.

    2016-01-01

    Now more than ever, scientific results are dependent on sophisticated software and analysis. Why should we trust code written by others? How do you ensure your own code produces sensible results? How do you make sure it continues to do so as you update, modify, and add functionality? Software testing is an integral part of code validation and writing tests should be a requirement for any software project. I will talk about Python-based tools that make managing and running tests much easier and explore some statistics for projects hosted on GitHub that contain tests.

  9. Growth of Microorganisms in Total Parenteral Nutrition Solutions Without Lipid

    PubMed Central

    Kuwahara, Takashi; Kaneda, Shinya; Shimono, Kazuyuki; Inoue, Yoshifumi

    2010-01-01

    Background: To identify the microorganisms that can grow rapidly in total parenteral nutrition (TPN) solutions, we investigated the growth of the major causes of catheter-related blood stream infection (Staphylococcus aureus, Serratia marcescens, Bacillus cereus, and Candida albicans) in TPN solutions without lipid. Methods: Experiment 1: A commercial TPN solution without lipid containing multivitamins (pH5.6) was used. A specific number of each test microorganism was added to each 10 mL of the TPN solution and incubated at room temperature. An aliquot of test solution was sampled and inoculated to SCD agar plates at 0, 24, and 48 hrs after the addition of the microorganisms. The number of microorganisms was counted as colony forming units. Experiment 2: The other 2 commercial TPN solutions without lipid (pH5.5) were supplemented with multivitamins. The pH values of the solutions were adjusted to about 6.0, 6.5, or 7.0 using 0.5 mol/L NaOH. The addition of microorganisms, incubation, and counting were performed in the same manner. Results: Experiment 1: S. aureus, S. marcescens, and B. cereus did not increase in the TPN solution without lipid containing multivitamins (pH5.6), but C. albicans increased rapidly. Experiment 2: The 3 bacterial species did not increase even at pH6.0, but increased at pH6.5 and increased rapidly at pH7.0 in both TPN solutions. C. albicans increased similarly at any pH. Conclusion: These results suggest that bacterial species cannot grow in TPN solutions without lipid due to the acidity (pH5.6 or lower), but Candida species can grow regardless of the acidity. PMID:20107529

  10. CESIUM RECOVERY FROM AQUEOUS SOLUTIONS

    DOEpatents

    Schneider, R.A.

    1961-06-20

    Cesium may be precipitated from an aqueous solution whose acidity ranges between a pH of 1.5 and a molarity of 5 on cobaltous, zinc, cadmium, nickel, or ferrous cobalticyanide. This precipitation brings about a separation from most fission products. Ruthenium which coprecipitates to a great degree can be removed by dissolving in sulfuric acid and boiling the solution in the presence of periodic acid for volatilization; other coprecipitated fission products can then be precipitated from the sulfuric acid solution with a ferric hydroxide carrier.

  11. Contamination of dental radiographic solutions.

    PubMed

    Tamburus, J R; Pardini, L C; Watanabe, P C

    1995-01-01

    Thirteen groups of periapical radiographic films were evaluated to determine and compare within and between groups the effects of contamination of the fixer solution with developing solution during radiographic processing. An aluminum penetrometer was used as the radiographic object to produce different optical densities. The images were compared using radiographic density and contrast as parameters. There were significant differences between the control groups and the groups processed with a contaminated fixer solution. No statistically significant differences were observed in the intragroup comparisons. PMID:8688649

  12. Formulation and Stability of Solutions.

    PubMed

    Akers, Michael J

    2016-01-01

    Ready-to-use solutions are the most preferable and most common dosage forms for injectable and topical ophthalmic products. Drugs formulated as solution almost always have chemical and physical stability challenges as well as solubility limitations and the need to prevent inadvertent microbial contamination issues. The first in this series of articles took us through a discussion of optimizing the physical stability of solutions. This article concludes this series of articles with a discussion on foreign particles, protein aggregation, and immunogenicity; optimizing microbiological activity; and osmolality (tonicity) agents, and discusses how these challenges and issues are addressed. PMID:27326440

  13. Determination of total solutes in synfuel wastewaters

    SciTech Connect

    Wallace, J.R.; Bonomo, F.S.

    1984-03-01

    Efforts to investigate both lyophilization and the measurement of colligative properties as an indication of total solute content are described. The objective of the work described is to develop a method for measuring total dissolved material in retort wastewaters which is simple and rugged enough to be performed in a field laboratory in support of pollution control tests. The analysis should also be rapid enough to provide timely and pertinent data to the pollution control plant operator. To be of most value, the technique developed also should be applicable to other synfuel wastewaters, most of which contain similar major components as oil shale retort waters. 4 references, 1 table.

  14. Alloy softening in binary iron solid solutions

    NASA Technical Reports Server (NTRS)

    Stephens, J. R.; Witzke, W. R.

    1976-01-01

    An investigation was conducted to determine softening and hardening behavior in 19 binary iron-alloy systems. Microhardness tests were conducted at four temperatures in the range 77 to 411 K. Alloy softening was exhibited by 17 of the 19 alloy systems. Alloy softening observed in 15 of the alloy systems was attributed to an intrinsic mechanism, believed to be lowering of the Peierls (lattice friction) stress. Softening and hardening rates could be correlated with the atomic radius ratio of solute to iron. Softening observed in two other systems was attributed to an extrinsic mechanism, believed to be associated with scavenging of interstitial impurities.

  15. Tack behavior of coating solutions I.

    PubMed

    Chopra, S K; Tawashi, R

    1982-08-01

    The tackiness of various tablet coating solutions was determined using a parallel plate technique with a tensile testing machine in conjunction with an oscilloscope where the separation force was displayed as a function of time. Measurements were made at various rates of separation on liquid films of constant thickness. Results showed that the force required to split a liquid film increases with an increase in rate of separation, and that tackiness increases with an increase in viscosity. The relation between tack and viscosity was not linear, and a modified Stefan equation was proposed. PMID:7120095

  16. Lagrangian solution of supersonic real gas flows

    NASA Technical Reports Server (NTRS)

    Loh, Ching-Yuen; Liou, Meng-Sing

    1993-01-01

    The present extention of a Lagrangian approach of the Riemann solution procedure, which was originally proposed for perfect gases, to real gases, is nontrivial and requires the development of an exact real-gas Riemann solver for the Lagrangian form of the conservation laws. Calculations including complex wave interactions of various types were conducted to test the accuracy and robustness of the approach. Attention is given to the case of 2D oblique waves' capture, where a slip line is clearly in evidence; the real gas effect is demonstrated in the case of a generic engine nozzle.

  17. Tack behavior of coating solutions I.

    PubMed

    Chopra, S K; Tawashi, R

    1982-08-01

    The tackiness of various tablet coating solutions was determined using a parallel plate technique with a tensile testing machine in conjunction with an oscilloscope where the separation force was displayed as a function of time. Measurements were made at various rates of separation on liquid films of constant thickness. Results showed that the force required to split a liquid film increases with an increase in rate of separation, and that tackiness increases with an increase in viscosity. The relation between tack and viscosity was not linear, and a modified Stefan equation was proposed.

  18. Efficient solution of the simplified PN equations

    DOE PAGES

    Hamilton, Steven P.; Evans, Thomas M.

    2014-12-23

    We show new solver strategies for the multigroup SPN equations for nuclear reactor analysis. By forming the complete matrix over space, moments, and energy a robust set of solution strategies may be applied. Moreover, power iteration, shifted power iteration, Rayleigh quotient iteration, Arnoldi's method, and a generalized Davidson method, each using algebraic and physics-based multigrid preconditioners, have been compared on C5G7 MOX test problem as well as an operational PWR model. These results show that the most ecient approach is the generalized Davidson method, that is 30-40 times faster than traditional power iteration and 6-10 times faster than Arnoldi's method.

  19. Automated iodine monitor system. [for aqueous solutions

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The feasibility of a direct spectrophotometric measurement of iodine in water was established. An iodine colorimeter, was built to demonstrate the practicality of this technique. The specificity of this method was verified when applied to an on-line system where a reference solution cannot be used, and a preliminary design is presented for an automated iodine measuring and controlling system meeting the desired specifications. An Automated iodine monitor/controller system based on this preliminary design was built, tested, and delivered to the Johnson Space Center.

  20. Simple solutions of multilayered discs subjected to biaxial moment loading.

    SciTech Connect

    Hsueh, Chun-Hway; Kelly, J R

    2009-01-01

    The purpose of this study was to derive a simple closed-form solution for the stress distribution through the thickness of multilayered discs subjected to biaxial moment loading, such that it can be used readily to evaluate the biaxial strength of multilayered dental ceramics using biaxial flexure tests. Methods A simple analytical model was developed to derive the stress distribution through the thickness of multilayered discs subjected to biaxial moment loading. The accuracy of the solution was verified by comparing with previous rigorous analytical solutions and finite element results. The results obtained from Roark's formulas for bilayered discs were also included for comparison.

  1. Corrosion of dental amalgams in solutions of organic acids.

    PubMed

    Palaghias, G

    1986-06-01

    A conventional and two high copper amalgams were tested in 0.5% aqueous solutions of acetic, formic, lactic and succinic acid. The corrosion behavior of the amalgams in the different solutions was evaluated by analyzing the soluble corrosion products using an atomic absorption spectrophotometer every month during a 6-month experimental period. The high copper amalgams showed a high dissolution rate in formic and lactic acid solutions from the initial stages of immersion when compared to the conventional. Later a marked decrease of the dissolution rate could be observed but it still remained at high levels. In acetic acid the amounts of elements dissolved from high copper amalgams were much less. Conventional amalgam released much smaller amounts of elements in almost all solutions tested except in the case of silver in lactic acid. Finally, in succinic acid solution, the amounts of elements dissolved were unexpectedly small considering the low pH of the solution and the dissolution rates of the amalgams in the other organic acid solutions. PMID:3461548

  2. Model-Based Software Testing for Object-Oriented Software

    ERIC Educational Resources Information Center

    Biju, Soly Mathew

    2008-01-01

    Model-based testing is one of the best solutions for testing object-oriented software. It has a better test coverage than other testing styles. Model-based testing takes into consideration behavioural aspects of a class, which are usually unchecked in other testing methods. An increase in the complexity of software has forced the software industry…

  3. 40 CFR 797.1400 - Fish acute toxicity test.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... construction materials, test chambers, and testing apparatus to dilution water or to test solutions prior to... tank with no recycling. (7) Incipient LC 50 means that test substance concentration, calculated from... substance. (F) A test substance delivery system for flow-through tests. (ii) Construction...

  4. 40 CFR 797.1400 - Fish acute toxicity test.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... construction materials, test chambers, and testing apparatus to dilution water or to test solutions prior to... tank with no recycling. (7) Incipient LC 50 means that test substance concentration, calculated from... substance. (F) A test substance delivery system for flow-through tests. (ii) Construction...

  5. Analytic Solutions and Resonant Solutions of Hyperbolic Partial Differential Equations

    NASA Astrophysics Data System (ADS)

    Wagenmaker, Timothy Roger

    This dissertation contains two main subject areas. The first deals with solutions to the wave equation Du/Dt + a Du/Dx = 0, where D/Dt and D/Dx represent partial derivatives and a(t,x) is real valued. The question I studied, which arises in control theory, is whether solutions which are real analytic with respect to the time variable are dense in the space of all solutions. If a is real analytic in t and x, the Cauchy-Kovalevsky Theorem implies that the solutions real analytic in t and x are dense, since it suffices to approximate the initial data by polynomials. The same positive result is valid when a is continuously differentiable and independent of t. This is proved by regularization in time. The hypothesis that a is independent of t cannot be replaced by the weaker assumption that a is real analytic in t, even when it is infinitely smooth. I construct a(t,x) for which the solutions which are analytic in time are automatically periodic in time. In particular these solutions are not dense in the space of all solutions. The second area concerns the resonant interaction of oscillatory waves propagating in a compressible inviscid fluid. An asymptotic description given by Andrew Majda, Rodolfo Rosales, and Maria Schonbek (MRS) involves the genuinely nonlinear quasilinear hyperbolic system Du/Dt + D(uu/2)/Dt + v = 0, Dv/Dt - D(vv/2)/Dt - u = 0. They performed many numerical simulations which indicated that small amplitude solutions of this system tend to evade shock formation, and conjectured that "smooth initial data with a sufficiently small amplitude never develop shocks throughout a long time interval of integration.". I proved that for smooth periodic U(x), V(x) and initial data u(0,x) = epsilonU(x), v(0,x) = epsilonV(x), the solution is smooth for time at least constant times | ln epsilon| /epsilon. This is longer than the lifetime order 1/ epsilon of the solution to the decoupled Burgers equations. The decoupled equation describes nonresonant interaction of

  6. Testing of pyrochemical centrifugal contactors

    SciTech Connect

    Chow, L.S.; Carls, E.L.; Basco, J.K.; Johnson, T.R.

    1996-08-01

    A centrifugal contactor that performs oxidation and reduction exchange reactions between molten metals and salts at 500 degrees Centigrade has been tested successfully at Argonne National Laboratory (ANL). The design is based on contactors for aqueous- organic systems operation near room temperature. In tests to demonstrate the performance of the pyrocontactor, cadmium and LICl- KCl eutectic salt were the immiscible solvent phases, and rare earths were the distributing solutes. The tests showed that the pyrocontactor mixed and separated the phases well, with stage efficiencies approaching 99% at rotor speeds near 2700 rpm. The contactor ran smoothly and reliably over the entire range of speeds that was tested.

  7. An adaptive grid method for computing time accurate solutions on structured grids

    NASA Technical Reports Server (NTRS)

    Bockelie, Michael J.; Smith, Robert E.; Eiseman, Peter R.

    1991-01-01

    The solution method consists of three parts: a grid movement scheme; an unsteady Euler equation solver; and a temporal coupling routine that links the dynamic grid to the Euler solver. The grid movement scheme is an algebraic method containing grid controls that generate a smooth grid that resolves the severe solution gradients and the sharp transitions in the solution gradients. The temporal coupling is performed with a grid prediction correction procedure that is simple to implement and provides a grid that does not lag the solution in time. The adaptive solution method is tested by computing the unsteady inviscid solutions for a one dimensional shock tube and a two dimensional shock vortex iteraction.

  8. The block adaptive multigrid method applied to the solution of the Euler equations

    NASA Technical Reports Server (NTRS)

    Pantelelis, Nikos

    1993-01-01

    In the present study, a scheme capable of solving very fast and robust complex nonlinear systems of equations is presented. The Block Adaptive Multigrid (BAM) solution method offers multigrid acceleration and adaptive grid refinement based on the prediction of the solution error. The proposed solution method was used with an implicit upwind Euler solver for the solution of complex transonic flows around airfoils. Very fast results were obtained (18-fold acceleration of the solution) using one fourth of the volumes of a global grid with the same solution accuracy for two test cases.

  9. Solutions For Smart Metering Under Harsh Environmental Condicions

    NASA Astrophysics Data System (ADS)

    Kunicina, N.; Zabasta, A.; Kondratjevs, K.; Asmanis, G.

    2015-02-01

    The described case study concerns application of wireless sensor networks to the smart control of power supply substations. The solution proposed for metering is based on the modular principle and has been tested in the intersystem communication paradigm using selectable interface modules (IEEE 802.3, ISM radio interface, GSM/GPRS). The solution modularity gives 7 % savings of maintenance costs. The developed solution can be applied to the control of different critical infrastructure networks using adapted modules. The proposed smart metering is suitable for outdoor installation, indoor industrial installations, operation under electromagnetic pollution, temperature and humidity impact. The results of tests have shown a good electromagnetic compatibility of the prototype meter with other electronic devices. The metering procedure is exemplified by operation of a testing company's workers under harsh environmental conditions.

  10. Ammonia Test

    MedlinePlus

    ... be ordered, along with other tests such as glucose , electrolytes , and kidney and liver function tests , to help diagnose the cause of ... Pages tab.) An increased ammonia level and decreased glucose ... may indicate that severe liver or kidney damage has impacted the body's ability ...

  11. Pharmacogenomic Testing

    MedlinePlus

    ... with pharmacogenomic testing. Visit the Food and Drug Administration (FDA) website for a list of drugs with pharmacogenomic information in their labeling. Did You Know? One size does not fit all. In the future, pharmacogenomic tests will be able to help many ...

  12. Erythropoietin test

    MedlinePlus

    ... kidney. These cells release more EPO when blood oxygen level is low. How the Test is Performed A blood sample is needed. How ... your doctor about the meaning of your specific test result. What ... in response to an event such as low blood oxygen level. The condition may occur at high altitudes ...

  13. Strength Testing.

    ERIC Educational Resources Information Center

    Londeree, Ben R.

    1981-01-01

    Postural deviations resulting from strength and flexibility imbalances include swayback, scoliosis, and rounded shoulders. Screening tests are one method for identifying strength problems. Tests for the evaluation of postural problems are described, and exercises are presented for the strengthening of muscles. (JN)

  14. Genetic Testing

    MedlinePlus

    ... genetic tests for several reasons. These include Finding genetic diseases in unborn babies Finding out if people carry a gene for a disease and might pass it on to their children Screening embryos for disease Testing for genetic diseases in adults before they cause ...

  15. Preparation of Simulated Waste Solutions

    SciTech Connect

    Walker, D.D.

    1999-06-08

    Waste Processing Technology personnel routinely prepare 0.5 to 10 L batches of salt solutions simulating Savannah River Site (SRS) soluble waste. This report describes the compositions and preparation methods.

  16. Cesium recovery from aqueous solutions

    DOEpatents

    Goodhall, C. A.

    1960-09-13

    A process for recovering cesium from aqueous solutions is given in which precipitation on zinc ferricyanide is used. The precipitation is preferably carried out in solutions containing at least 0.0004M zinc ferricyanide, an acidity ranging from 0.2N mineral acid to 0.61N acid deficiency, and 1 to 2.5M aluminum nitrate. (D.L.C.)

  17. Nonequilibrium thermodynamics of pressure solution

    NASA Astrophysics Data System (ADS)

    Lehner, F. K.; Bataille, J.

    1984-01-01

    This paper is concerned with the thermodynamic theory of solution and precipitation processes in wet crustal rocks and with the mechanism of steady pressure-solution slip in ‘contact zones,’ such as grain-to-grain contacts, fracture surfaces, and permeable gouge layers, that are infiltrated by a mobile aqueous solution phase. A local dissipation jump condition at the phase boundary is fundamental to identifying the thermodynamic force driving the solution and precipitation process and is used here in setting up linear phenomenological relations to model near-equilibrium phase transformation kinetics. The local thermodynamic equilibrium of a stressed pure solid in contact with its melt or solution phase is governed by Gibbs's relation, which is rederived here, in a manner emphasizing its independence of constitutive assumptions for the solid while neglecting surface tension and diffusion in the solid. Fluid-infiltrated contact zones, such as those formed by rough surfaces, cannot generally be in thermodynamic equilibrium, especially during an ongoing process of pressure-solution slip, and the existing equilibrium formulations are incorrect in overlooking dissipative processes tending to eliminate fluctuations in superficial free energies due to stress concentrations near asperities, defects, or impurities. Steady pressure-solution slip is likely to exhibit a nonlinear dependence of slip rate on shear stress and effective normal stress, due to a dependence of the contact-zone state on the latter. Given that this dependence is negligible within some range, linear relations for pressure-solution slip can be derived for the limiting cases of diffusion-controlled and interface-reaction-controlled rates. A criterion for rate control by one of these mechanisms is set by the magnitude of the dimensionless quantity kδ/2C pD, where k is the interfacial transfer coefficient, δ is the mean diffusion path length, C p is the solubility at pressure p, and D is the mass

  18. Comprehensive Water-Efficiency Solutions

    SciTech Connect

    McMordie Stoughton, Kate

    2015-07-15

    Energy performance contracts can be an effective way to integrate comprehensive water-efficient technologies and solutions into energy efficiency projects. Current practices often miss key opportunities to incorporate a full suite of water measures primarily because a comprehensive approach is not taken in the assessment. This article provides information on how to develop a comprehensive water project that leads to innovative solutions and potential for large water reduction.

  19. Cosmological solution moduli of bigravity

    SciTech Connect

    Yılmaz, Nejat Tevfik

    2015-09-29

    We construct the complete set of metric-configuration solutions of the ghost-free massive bigravity for the scenario in which the g−metric is the Friedmann-Lemaitre-Robertson-Walker (FLRW) one, and the interaction Lagrangian between the two metrics contributes an effective ideal fluid energy-momentum tensor to the g-metric equations. This set corresponds to the exact background cosmological solution space of the theory.

  20. Optical properties of chitosan in aqueous solution of L- and D-ascorbic acids

    NASA Astrophysics Data System (ADS)

    Malinkina, Olga N.; Shipovskaya, Anna B.; Kazmicheva, Olga F.

    2016-04-01

    The optical properties of aqueous chitosan solutions in L- and D-ascorbic acids were studied by optical rotatory dispersion and spectrophotometry. The specific optical rotation [α] of all chitosan solutions tested was positive, in contrast to aqueous solutions of the ascorbic acid enantiomers, which exhibit an inverse relationship of [α] values. Significant differences in the absolute values of [α] of the chitosan solutions at polymer-acid ratios exceeding the equimolar one were found.

  1. Bag Test Measures Leakage From Insulated Pipe

    NASA Technical Reports Server (NTRS)

    Schock, Kent D.; Easter, Barry P.

    1994-01-01

    Test quantifies leakage of gas from pipe even though pipe covered with insulation. Involves use of helium analyzer to measure concentration of helium in impermeable bag around pipe. Test administered after standard soap-solution bubble test indicates presence and general class of leakage.

  2. Organic Solutes in Hyperthermophilic Archaea

    PubMed Central

    Martins, L. O.; Huber, R.; Huber, H.; Stetter, K. O.; Da Costa, M. S.; Santos, H.

    1997-01-01

    We examined the accumulation of organic solutes under optimum growth conditions in 12 species of thermophilic and hyperthermophilic Archaea belonging to the Crenarchaeota and Euryarchaeota. Pyrobaculum aerophilum, Thermoproteus tenax, Thermoplasma acidophilum, and members of the order Sulfolobales accumulated trehalose. Pyrococcus furiosus accumulated di-myo-inositol-1,1(prm1)(3,3(prm1))-phosphate and (beta)-mannosylglycerate, Methanothermus fervidus accumulated cyclic-2,3-bisphosphoglycerate and (beta)-mannosylglycerate, while the only solute detected in Pyrodictium occultum was di-myo-inositol-1,1(prm1)(3,3(prm1))-phosphate. Methanopyrus kandleri accumulated large concentrations of cyclic-2,3-bisphosphoglycerate. On the other hand, Archaeoglobus fulgidus accumulated three phosphorylated solutes; prominent among them was a compound identified as di-glycerol-phosphate. This solute increased in concentration as the salinity of the medium and the growth temperature were raised, suggesting that this compound serves as a general stress solute. Di-myo-inositol-1,1(prm1)(3,3(prm1))-phosphate accumulated at supraoptimal temperature only. The relationship between the accumulation of unusual solutes and high temperatures is also discussed. PMID:16535556

  3. Crystallization of supercooled solutions. [atmosphere

    NASA Technical Reports Server (NTRS)

    Harrison, K.; Hallett, John

    1988-01-01

    Crystallization of uniformly supercooled solutions (Na2SO4, NaCl, H2SO4, HNO3, HCl) was studied. It is shown how crystal growth velocity and habit depend on solution and concentration. The segregation coefficient for the solute in ice is measured by analysis of ice and solution, separated immediately after initial freezing, at different supercoolings. Subsequent solidification gives ion rejection at a varying rate depending on the geometry of the freezing, and may result in separation of hydrates, particularly when the initial concentration is high, as in haze (inactivated) droplets and low temperatures found in the Antarctic stratosphere. Electrical effects associated with rapid freezing are also investigated. Results suggest that more extensive measurements need to be made in solutions at different supercoolings, and that substantial electrical effects may be present for higher concentrations under these conditions. Damage to vegetation could occur under specific conditions as concentrated solutions (possibly H2SO4) are rejected in the freezing of rime or dew.

  4. Reuse of hydroponic waste solution.

    PubMed

    Kumar, Ramasamy Rajesh; Cho, Jae Young

    2014-01-01

    Attaining sustainable agriculture is a key goal in many parts of the world. The increased environmental awareness and the ongoing attempts to execute agricultural practices that are economically feasible and environmentally safe promote the use of hydroponic cultivation. Hydroponics is a technology for growing plants in nutrient solutions with or without the use of artificial medium to provide mechanical support. Major problems for hydroponic cultivation are higher operational cost and the causing of pollution due to discharge of waste nutrient solution. The nutrient effluent released into the environment can have negative impacts on the surrounding ecosystems as well as the potential to contaminate the groundwater utilized by humans for drinking purposes. The reuse of non-recycled, nutrient-rich hydroponic waste solution for growing plants in greenhouses is the possible way to control environmental pollution. Many researchers have successfully grown several plant species in hydroponic waste solution with high yield. Hence, this review addresses the problems associated with the release of hydroponic waste solution into the environment and possible reuse of hydroponic waste solution as an alternative resource for agriculture development and to control environmental pollution.

  5. Rheology of clustering protein solutions.

    PubMed

    Dharmaraj, Vishnu L; Godfrin, P Douglas; Liu, Yun; Hudson, Steven D

    2016-07-01

    High viscosity is a major challenge with protein therapeutics at extremely high concentrations. To overcome this obstacle, it is essential to understand the relationship between the concentration of a protein solution and its viscosity as a function of shear rate and temperature. Here, lysozyme is a model charged globular protein having both short-ranged attraction (SA) and long-ranged repulsion (LR) that promote the formation of dynamic clusters at high concentrations. We report viscosity measurements from a micro-capillary rheometer (using only several microliters of solution) over a wide range of lysozyme solution concentrations, shear rates, and temperatures. Solution structural relaxation dynamics are also probed by dynamic light scattering (DLS). As a result of lysozyme's SALR interactions, the viscosity increased dramatically across all shear rates with increasing concentration and decreasing temperature. While most of the solutions exhibited Newtonian behavior, shear thinning was exhibited at the highest concentration (480 g/l) and lowest temperatures at shear rates above approximately 10(4 )s(-1). The onset shear rate for thinning and a structural relaxation rate estimated from a slow-mode measured by DLS are compared. These measurements provide insights into the properties of protein solutions and their microscopic structural origins. PMID:27478524

  6. Reuse of hydroponic waste solution.

    PubMed

    Kumar, Ramasamy Rajesh; Cho, Jae Young

    2014-01-01

    Attaining sustainable agriculture is a key goal in many parts of the world. The increased environmental awareness and the ongoing attempts to execute agricultural practices that are economically feasible and environmentally safe promote the use of hydroponic cultivation. Hydroponics is a technology for growing plants in nutrient solutions with or without the use of artificial medium to provide mechanical support. Major problems for hydroponic cultivation are higher operational cost and the causing of pollution due to discharge of waste nutrient solution. The nutrient effluent released into the environment can have negative impacts on the surrounding ecosystems as well as the potential to contaminate the groundwater utilized by humans for drinking purposes. The reuse of non-recycled, nutrient-rich hydroponic waste solution for growing plants in greenhouses is the possible way to control environmental pollution. Many researchers have successfully grown several plant species in hydroponic waste solution with high yield. Hence, this review addresses the problems associated with the release of hydroponic waste solution into the environment and possible reuse of hydroponic waste solution as an alternative resource for agriculture development and to control environmental pollution. PMID:24838258

  7. A New Acoustic Test Facility at Alcatel Space Test Centre

    NASA Astrophysics Data System (ADS)

    Meurat, A.; Jezequel, L.

    2004-08-01

    Due to the obsolescence of its acoustic test facility, Alcatel Space has initiated the investment of a large acoustic chamber on its test centre located in Cannes, south of France. This paper presents the main specification elaborated to design the facility, and the solution chosen : it will be located on a dedicated area of the existing test centre and will be based on technical solution already used in similar facilities over the world. The main structure consists in a chamber linked to an external envelope (concrete building) through suspension aiming at decoupling the vibration and preventing from seismic risks. The noise generation system is based on the use of Wyle modulators located on the chamber roof. Gaseous nitrogen is produced by a dedicated gas generator developed by Air-Liquide that could deliver high flow rate with accurate pressure and temperature controls. The control and acquisition system is based on existing solution implemented on the vibration facilities of the test centre. With the start of the construction in May 2004, the final acceptance tests are planned for April 2005, and the first satellites to be tested are planned for May 2005.

  8. Growth of Microorganisms in Total Parenteral Nutrition Solutions Containing Lipid

    PubMed Central

    Kuwahara, Takashi; Shimono, Kazuyuki; Kaneda, Shinya; Tamura, Takumi; Ichihara, Masao; Nakashima, Yoshifumi

    2010-01-01

    Background: To identify the microorganisms that can grow rapidly in total parenteral nutrition (TPN) solutions, we investigated the growth of the major causes of catheter-related blood stream infection (Staphylococcus aureus, Serratia marcescens, Bacillus cereus, and Candida albicans) in TPN solutions containing lipid. Methods: The pH value of a TPN solution containing lipid (pH 6.0, containing 20 ppm of NaHSO3) was adjusted by the addition of HCl to 5.7, 5.4, or 4.9. The pH value of another TPN solution (pH5.5, containing 400 ppm of NaHSO3) was adjusted by the addition of NaOH to 5.9, 6.3, or 6.8. A specific number of each microorganism was added to 10 mL of each test solution and incubated at room temperature. The number of microorganisms was counted as colony forming units at 0, 24, and 48 hrs later. Results: C albicans increased similarly at any pH values in the TPN solution. The bacterial species also increased rapidly at pH6.0 in the solution containing 20 ppm of NaHSO3, but growth was suppressed as the pH value was reduced, with growth halted at pH4.9. However, these bacterial species did not increase, even at pH5.9, in the other solution containing 400 ppm of NaHSO3. Conclusions: These results suggest that Candida species can grow rapidly in almost all TPN solutions regardless of the acidity, lipid, and NaHSO3; also, some bacterial species may grow in TPN solutions containing lipid unless the pH value is 5.0 or less. Therefore, each TPN solution should be examined whether or not the bacterial species can proliferate. PMID:20567610

  9. Solute transport in solution conduits exhibiting multi-peaked breakthrough curves

    NASA Astrophysics Data System (ADS)

    Field, Malcolm S.; Leij, Feike J.

    2012-05-01

    SummarySolute transport in karst aquifers is primarily constrained to solution conduits where transport is rapid, turbulent, and relatively unrestrictive. Breakthrough curves generated from tracer tests are typically positively-skewed and may exhibit multiple peaks. In order to understand the circumstances under which multi-peaked positively skewed breakthrough curves occur, physical experiments utilizing single- and multiple-flow channels were conducted. Experiments also included waterfalls, short-term solute detention in pools, and flow obstructions. Results demonstrated that breakthrough curve skewness nearly always occurs to some degree but is magnified as immobile-flow regions are encountered. Multi-peaked breakthrough curves occurred when flow in the main channel became partially occluded from blockage in the main channel that forced divergence of solute into auxiliary channels and when waterfalls and detention in pools occurred. Currently, multi-peaked breakthrough curves are fitted by a multi-dispersion model in which a series of curves generated by the advection-dispersion equation are fitted to each measured peak by superimposing the measured breakthrough curve to obtain a combined model fit with a consequent set of estimated velocities and dispersions. In this paper, a dual-advection dispersion equation with first-order mass transfer between conduits was derived. The dual-advection dispersion equation was then applied to the multi-peaked breakthrough curves obtained from the physical experiments in order to obtain some insight into the operative solute-transport processes through the acquisition of a consequent set of velocities, dispersions, and related parameters. Successful application of the dual-advection, dispersion equation to a tracer test that exhibited dual peaks for a karst aquifer known to consist of two connected but mostly separate conduits confirmed the appropriateness of using a multi-dispersion type model when conditions warrant.

  10. On the Relationship between Solution Strategies in Two Mental Rotation Tasks

    ERIC Educational Resources Information Center

    Janssen, Anne B.; Geiser, Christian

    2010-01-01

    Individual differences in solution strategies have frequently been reported for different measures of mental rotation (MR) ability. In the present study (N=346 German students), we investigated the relationship between solution strategies on two tests commonly used to identify different patterns of strategies: the Mental Rotations Test (MRT;…

  11. The effects of exposure of fertilizer solutions on concretes containing additives

    SciTech Connect

    Nguyen, D.T.; Nichols, D.E.; Cole, C.A.

    1992-12-01

    Concrete made from Portland cement, with and without additives, was exposed to urea-ammonium nitrate and to ammonium polyphosphate solutions for periods up to one year. The degree of deterioration of the test specimens was evaluated based on visual examination, decrease in compression strength, and depth of penetration of the test solution into the specimen interior. 7 tabs.

  12. Technetium recovery from high alkaline solution

    DOEpatents

    Nash, Charles A.

    2016-07-12

    Disclosed are methods for recovering technetium from a highly alkaline solution. The highly alkaline solution can be a liquid waste solution from a nuclear waste processing system. Methods can include combining the solution with a reductant capable of reducing technetium at the high pH of the solution and adding to or forming in the solution an adsorbent capable of adsorbing the precipitated technetium at the high pH of the solution.

  13. Comparison of non-ideal solution theories for multi-solute solutions in cryobiology and tabulation of required coefficients.

    PubMed

    Zielinski, Michal W; McGann, Locksley E; Nychka, John A; Elliott, Janet A W

    2014-10-01

    Thermodynamic solution theories allow the prediction of chemical potentials in solutions of known composition. In cryobiology, such models are a critical component of many mathematical models that are used to simulate the biophysical processes occurring in cells and tissues during cryopreservation. A number of solution theories, both thermodynamically ideal and non-ideal, have been proposed for use with cryobiological solutions. In this work, we have evaluated two non-ideal solution theories for predicting water chemical potential (i.e. osmolality) in multi-solute solutions relevant to cryobiology: the Elliott et al. form of the multi-solute osmotic virial equation, and the Kleinhans and Mazur freezing point summation model. These two solution theories require fitting to only single-solute data, although they can make predictions in multi-solute solutions. The predictions of these non-ideal solution theories were compared to predictions made using ideal dilute assumptions and to available literature multi-solute experimental osmometric data. A single, consistent set of literature single-solute solution data was used to fit for the required solute-specific coefficients for each of the non-ideal models. Our results indicate that the two non-ideal solution theories have similar overall performance, and both give more accurate predictions than ideal models. These results can be used to select between the non-ideal models for a specific multi-solute solution, and the updated coefficients provided in this work can be used to make the desired predictions.

  14. Parametric solution, traveling wave solution for integrable dynamical system

    NASA Astrophysics Data System (ADS)

    Qiao, Zhijun; Holm, Darryl

    2002-11-01

    In this talk, I introduce a new integrable hierarchy of nonlinear dynamical equations. In this hierarchy there are the following representative equations: u_t=partial^5x u^-2/3, u_t=partial^5_xfrac(u^-1/3)_xx -2(u^-1/6)_x^2u,u_xxt+3u_xxu_x+u_xxxu=0. The first two are in the positive order hierarchy while the 3rd one is in the negative order hierarchy. The whole hierarchy is shown integrable through solving a key 3× 3 matrix equation. The 3×3 Lax pairs and their adjoint representations are nonlinearized to be two Liouville-integrable canonical Hamiltonian systems. Based on the integrability of 6N-dimensional systems we give the parametric solution of the positive hierarchy.In particular, we obtain the parametric solution of the equation u_t=partial^5x u^-2/3. Finally, we give the travelling wave solution (TWS) of the above three equations. The TWSs of the first two equations have singularity, but the TWS of the 3rd one is continuous. For the 5th-order equation, its smooth parametric solution can not include its singular TWS. We also analyse the initial Gaussian solutions for the equations u_t=partial^5x u^-2/3, and u_xxt+3u_xxu_x+u_xxxu=0. The former is stable, but the latter is not.

  15. Microfluidic-Based Robotic Sampling System for Radioactive Solutions

    SciTech Connect

    Jack D. Law; Julia L. Tripp; Tara E. Smith; Veronica J. Rutledge; Troy G. Garn; John Svoboda; Larry Macaluso

    2014-02-01

    A novel microfluidic based robotic sampling system has been developed for sampling and analysis of liquid solutions in nuclear processes. This system couples the use of a microfluidic sample chip with a robotic system designed to allow remote, automated sampling of process solutions in-cell and facilitates direct coupling of the microfluidic sample chip with analytical instrumentation. This system provides the capability for near real time analysis, reduces analytical waste, and minimizes the potential for personnel exposure associated with traditional sampling methods. A prototype sampling system was designed, built and tested. System testing demonstrated operability of the microfluidic based sample system and identified system modifications to optimize performance.

  16. Patch tests*

    PubMed Central

    Lazzarini, Rosana; Duarte, Ida; Ferreira, Alessandra Lindmayer

    2013-01-01

    Patch tests were introduced as a diagnostic tool in the late nineteenth century. Since then, they have improved considerably becoming what they are today. Patch tests are used in the diagnostic investigation of contact dermatitis worldwide. Batteries or series previously studied and standardized should be used in patch testing. The methodology is simple, but it requires adequate training for the results to be correctly interpreted and used. Despite having been used for over a century, it needs improvement like all other diagnostic techniques in the medical field. PMID:24474094

  17. Nuclear test watchers feel political heat

    SciTech Connect

    Marshall, E.

    1987-08-07

    One year after US citizen diplomats signed a remarkable pact with the Soviet Union to monitor nuclear bomb tests, they are running into some of the obstacles that regular diplomats encounter - political flak from the Pentagon and harassment by the Soviet military. But they have devised some technical solutions that they hope will get them around the roadblocks. These solutions are discussed.

  18. Hydrodynamic test problems

    SciTech Connect

    Moran, B

    2005-06-02

    We present test problems that can be used to check the hydrodynamic implementation in computer codes designed to model the implosion of a National Ignition Facility (NIF) capsule. The problems are simplified, yet one of them is three-dimensional. It consists of a nearly-spherical incompressible imploding shell subjected to an exponentially decaying pressure on its outer surface. We present a semi-analytic solution for the time-evolution of that shell with arbitrary small three-dimensional perturbations on its inner and outer surfaces. The perturbations on the shell surfaces are intended to model the imperfections that are created during capsule manufacturing.

  19. Relationships between the solution and solid-state properties of solution-cast low-k silica thin films.

    PubMed

    Chiang, Chao-Ching; Su, Chien-You; Yang, An-Chih; Wang, Ting-Yu; Lee, Wen-Ya; Hua, Chi-Chung; Kang, Dun-Yen

    2016-07-27

    This paper reports on the fabrication of low-k (amorphous) silica thin films cast from solutions without and with two different types of surfactants (TWEEN® 80 and Triton™ X-100) to elucidate the relationships between the structural/morphological features of the casting solutions and the physical properties of the resulting thin films. Cryogenic transmission microscopy (cryo-TEM), static/dynamic light scattering (SLS/DLS), and small-angle X-ray scattering (SAXS) revealed contrasting colloidal dispersion states and phase behavior among the three casting solutions. Casting solution with the Triton™ X-100 surfactant produced stable (>90 days) nanoparticles with good dispersion in solution (mean particle size ∼10 nm) as well as good mesopore volume (characterized by nitrogen physisorption) in powder and thin films of high mechanical strength (characterized by the nanoindentation test). The longer main chain and bulkier side units of the TWEEN® 80 surfactant led to stable micelle-nanoparticle coexisting dispersion, which resulted in the highest mesopore volume in powder and thin films with the lowest dielectric constant (∼3) among the samples in this study. The casting solution without the surfactant failed to produce a stabilized solution or thin films of acceptable uniformity. These findings demonstrate the possibility of fine-tuning low-k silica film properties by controlling the colloidal state of casting solutions. PMID:27401818

  20. Simple Solutions for Space Station Audio Problems

    NASA Technical Reports Server (NTRS)

    Wood, Eric

    2016-01-01

    Throughout this summer, a number of different projects were supported relating to various NASA programs, including the International Space Station (ISS) and Orion. The primary project that was worked on was designing and testing an acoustic diverter which could be used on the ISS to increase sound pressure levels in Node 1, a module that does not have any Audio Terminal Units (ATUs) inside it. This acoustic diverter is not intended to be a permanent solution to providing audio to Node 1; it is simply intended to improve conditions while more permanent solutions are under development. One of the most exciting aspects of this project is that the acoustic diverter is designed to be 3D printed on the ISS, using the 3D printer that was set up earlier this year. Because of this, no new hardware needs to be sent up to the station, and no extensive hardware testing needs to be performed on the ground before sending it to the station. Instead, the 3D part file can simply be uploaded to the station's 3D printer, where the diverter will be made.

  1. AMA Test

    MedlinePlus

    ... Smooth muscle antibodies (SMA) Antinuclear antibodies (ANA) Alkaline phosphatase (ALP) IgM level Bilirubin Albumin Prothrombin time (PT) ... a liver panel (elevated liver enzymes), especially alkaline phosphatase (ALP) . An AMA or AMA-M2 test may ...

  2. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L.

    1990-01-01

    Included are three demonstrations that include the phase change of ice when under pressure, viscoelasticity and colloid systems, and flame tests for metal ions. The materials, procedures, probable results, and applications to real life situations are included. (KR)

  3. Genetic Testing

    MedlinePlus

    ... diagnose celiac disease, but have been on the gluten-free diet for a significant period of time, ... antibody test, measure the autoimmune response triggered by gluten that occurs at a point in time. (Think ...

  4. Troponins Test

    MedlinePlus

    ... significantly elevated troponin levels and, in particular, a rise in the results from a series of tests ... do not affect cardiac troponin levels. Troponin may rise following strenuous exercise, although in the absence of ...

  5. Cortisol Test

    MedlinePlus

    ... is produced and secreted by the adrenal glands . Production of the hormone is regulated by the hypothalamus ... help determine its cause: Testing for Excess Cortisol Production If a person has a high blood cortisol ...

  6. Pregnancy Tests

    MedlinePlus

    ... the hCG. hCG is made when a fertilized egg implants in the uterus. This usually happens about ... conception (when the man's sperm fertilizes the woman's egg). 1 Some home pregnancy tests are more sensitive ...

  7. Lead Test

    MedlinePlus

    ... to determine lead sources, educating family members about lead poisoning , and instituting follow-up testing to monitor the ... high levels of lead, see the article on Lead Poisoning . The Occupational Safety and Health Administration (OSHA) has ...

  8. Test report :

    SciTech Connect

    Rose, David Martin; Schenkman, Benjamin L.; Borneo, Daniel R.

    2013-10-01

    The Department of Energy Office of Electricity (DOE/OE), Sandia National Laboratories (SNL) and the Base Camp Integration Lab (BCIL) partnered together to incorporate an energy storage system into a microgrid configured Forward Operating Base to reduce the fossil fuel consumption and to ultimately save lives. Energy storage vendors will be sending their systems to SNL Energy Storage Test Pad (ESTP) for functional testing and then to the BCIL for performance evaluation. The technologies that will be tested are electro-chemical energy storage systems comprising of lead acid, lithium-ion or zinc-bromide. Raytheon/KTech has developed an energy storage system that utilizes zinc-bromide flow batteries to save fuel on a military microgrid. This report contains the testing results and some limited analysis of performance of the Raytheon/KTech Zinc-Bromide Energy Storage System.

  9. Test report :

    SciTech Connect

    Rose, David Martin; Schenkman, Benjamin L.; Borneo, Daniel R.

    2013-08-01

    The Department of Energy Office of Electricity (DOE/OE), Sandia National Laboratory (SNL) and the Base Camp Integration Lab (BCIL) partnered together to incorporate an energy storage system into a microgrid configured Forward Operating Base to reduce the fossil fuel consumption and to ultimately save lives. Energy storage vendors will be sending their systems to SNL Energy Storage Test Pad (ESTP) for functional testing and then to the BCIL for performance evaluation. The technologies that will be tested are electro-chemical energy storage systems comprised of lead acid, lithium-ion or zinc-bromide. Princeton Power Systems has developed an energy storage system that utilizes lithium ion phosphate batteries to save fuel on a military microgrid. This report contains the testing results and some limited analysis of performance of the Princeton Power Systems Prototype Energy Storage System.

  10. Test report :

    SciTech Connect

    Rose, David Martin; Schenkman, Benjamin L.; Borneo, Daniel R.

    2013-08-01

    The Department of Energy Office of Electricity (DOE/OE), Sandia National Laboratory (SNL) and the Base Camp Integration Lab (BCIL) partnered together to incorporate an energy storage system into a microgrid configured Forward Operating Base to reduce the fossil fuel consumption and to ultimately save lives. Energy storage vendors have supplied their systems to SNL Energy Storage Test Pad (ESTP) for functional testing and a subset of these systems were selected for performance evaluation at the BCIL. The technologies tested were electro-chemical energy storage systems comprised of lead acid, lithium-ion or zinc-bromide. MILSPRAY Military Technologies has developed an energy storage system that utilizes lead acid batteries to save fuel on a military microgrid. This report contains the testing results and some limited assessment of the Milspray Scorpion Energy Storage Device.

  11. Test Report :

    SciTech Connect

    Rose, David Martin; Schenkman, Benjamin L.; Borneo, Daniel R.

    2013-10-01

    The Department of Energy Office of Electricity (DOE/OE), Sandia National Laboratories (SNL) and the Base Camp Integration Lab (BCIL) partnered together to incorporate an energy storage system into a microgrid configured Forward Operating Base to reduce the fossil fuel consumption and to ultimately save lives. Energy storage vendors will be sending their systems to SNL Energy Storage Test Pad (ESTP) for functional testing and then to the BCIL for performance evaluation. The technologies that will be tested are electro-chemical energy storage systems comprising of lead acid, lithium-ion or zinc-bromide. GS Battery and EPC Power have developed an energy storage system that utilizes zinc-bromide flow batteries to save fuel on a military microgrid. This report contains the testing results and some limited analysis of performance of the GS Battery, EPC Power HES RESCU.

  12. Neuropathy Tests

    MedlinePlus

    ... be limited. Home Visit Global Sites Search Help? Neuropathy Share this page: Was this page helpful? Overview | ... of testing are: To diagnose the presence of neuropathy and distinguish it from other conditions that may ...

  13. Lipase test

    MedlinePlus

    ... the bowel (bowel obstruction) Celiac disease Duodenal ulcer Cancer of the pancreas Infection or swelling of the pancreas This test may also be done for familial lipoprotein lipase deficiency . Risks ... Update Date 2/4/2015 Updated ...

  14. VMA Test

    MedlinePlus

    ... is primarily used to detect and rule out neuroblastomas in children with an abdominal mass or other ... homovanillic acid (HVA) test to help diagnose a neuroblastoma, to monitor the effectiveness of treatment, and to ...

  15. Iron Test

    MedlinePlus

    ... detect and help diagnose iron deficiency or iron overload. In people with anemia , these tests can help ... also be ordered when iron deficiency or iron overload is suspected. Early iron deficiency often goes unnoticed. ...

  16. Test Anxiety

    MedlinePlus

    ... for Parents for Kids for Teens Teens Home Body Mind Sexual Health Food & Fitness Diseases & Conditions Infections Q& ... Like other anxiety reactions, test anxiety affects the body and the mind. When you're under stress, your body releases ...

  17. VDRL test

    MedlinePlus

    ... conditions may cause a false-positive test, including: HIV Lyme disease Certain types of pneumonia Malaria Systemic lupus erythematosus The body does not always produce antibodies specifically in response to the syphilis bacteria, so ...

  18. RPR test

    MedlinePlus

    ... infections and is routinely used to screen pregnant women for the disease. Several states also require that couples be screened for syphilis before getting a marriage license. The test is also used to see ...

  19. Prealbumin Test

    MedlinePlus

    ... used to help detect and diagnose protein-calorie malnutrition as well as to monitor people receiving total ... be used to assess nutritional status or diagnose malnutrition. However, others believe that the test can be ...

  20. Calcium Test

    MedlinePlus

    ... as thyroid disease , parathyroid disorder , malabsorption , cancer, or malnutrition An ionized calcium test may be ordered when ... albumin , which can result from liver disease or malnutrition , both of which may result from alcoholism or ...

  1. Genomic Testing

    MedlinePlus

    ... Working Group Independent Web site Informing the effective integration of genomics into health practice—Lynch syndrome ACCE Model for Evaluating Genetic Tests Recommendations by the EGAPP Working Group Top of ... ...

  2. Phosphorus Test

    MedlinePlus

    ... be limited. Home Visit Global Sites Search Help? Phosphorus Share this page: Was this page helpful? Also ... else I should know? How is it used? Phosphorus tests are most often ordered along with other ...

  3. Triglycerides Test

    MedlinePlus

    ... be limited. Home Visit Global Sites Search Help? Triglycerides Share this page: Was this page helpful? Also known as: TG; TRIG Formal name: Triglycerides Related tests: Cholesterol ; HDL Cholesterol ; LDL Cholesterol ; Direct ...

  4. ACT Test

    MedlinePlus

    ... this page helpful? Also known as: ACT; Activated Coagulation Time Formal name: Activated Clotting Time Related tests: ... in the blood called platelets and proteins called coagulation factors are activated in a sequence of steps ...

  5. Fibrinogen Test

    MedlinePlus

    ... Related tests: PT and INR , PTT , D-dimer , Coagulation Factors , Thrombin Time , hs-CRP At a Glance ... and D-dimer to help diagnose disseminated intravascular coagulation (DIC) or abnormal fibrinolysis Occasionally to help monitor ...

  6. Sodium Test

    MedlinePlus

    ... be limited. Home Visit Global Sites Search Help? Sodium Share this page: Was this page helpful? Also known as: Na Formal name: Sodium Related tests: Chloride , Bicarbonate , Potassium , Electrolytes , Osmolality , Basic ...

  7. Toxoplasmosis Testing

    MedlinePlus

    ... Toxoplasma gondii Molecular Detection by PCR Related tests: TORCH ; CSF Analysis ; Amniotic Fluid Analysis At a Glance ... may sometimes be performed as part of a TORCH panel . TORCH is an acronym for several infections ...

  8. Testosterone Test

    MedlinePlus

    ... of other conditions, such as polycystic ovarian syndrome (PCOS) . ^ Back to top What does the test result ... are normally low. Increased testosterone levels can indicate: PCOS Ovarian or adrenal gland tumor Congenital adrenal hyperplasia ^ ...

  9. Insulin Test

    MedlinePlus

    ... people with type 2 diabetes , polycystic ovarian syndrome (PCOS) , prediabetes or heart disease , or metabolic syndrome . A ... resistance), especially in obese individuals and those with PCOS . This test involves an IV-infusion of insulin, ...

  10. 49 CFR 178.813 - Leakproofness test.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... vent must be sealed. For metal IBC design types, the initial test must be carried out before the... the seams and joints with a heavy oil, a soap solution and water, or other methods suitable for...

  11. Testing Composites

    NASA Technical Reports Server (NTRS)

    1981-01-01

    A device for testing composites for strength characteristics has been developed by Acoustic Emission Technology Corporation. Called the Model 206AU, the system is lightweight and portable. It is comprised of three sections. The "pulser" section injects ultrasonic waves into the material under test. A receiver picks up the simulated stress waves as they pass through the material and relays the signals to the acoustic emission section, where they are electronically analyzed.

  12. Adsorption of cesium on cement mortar from aqueous solutions.

    PubMed

    Volchek, Konstantin; Miah, Muhammed Yusuf; Kuang, Wenxing; DeMaleki, Zack; Tezel, F Handan

    2011-10-30

    The adsorption of cesium on cement mortar from aqueous solutions was studied in series of bench-scale tests. The effects of cesium concentration, temperature and contact time on process kinetics and equilibrium were evaluated. Experiments were carried out in a range of initial cesium concentrations from 0.0103 to 10.88 mg L(-1) and temperatures from 278 to 313 K using coupons of cement mortar immersed in the solutions. Non-radioactive cesium chloride was used as a surrogate of the radioactive (137)Cs. Solution samples were taken after set periods of time and analyzed by inductively coupled plasma mass spectroscopy. Depending on the initial cesium concentration, its equilibrium concentration in solution ranged from 0.0069 to 8.837 mg L(-1) while the respective surface concentration on coupons varied from 0.0395 to 22.34 μg cm(-2). Equilibrium test results correlated well with the Freundlich isotherm model for the entire test duration. Test results revealed that an increase in temperature resulted in an increase in adsorption rate and a decrease in equilibrium cesium surface concentration. Among several kinetic models considered, the pseudo-second order reaction model was found to be the best to describe the kinetic test results in the studied range of concentrations. The adsorption activation energy determined from Arrhenius equation was found to be approximately 55.9 kJ mol(-1) suggesting that chemisorption was the prevalent mechanism of interaction between cesium ions and cement mortar.

  13. Nucleation of Crystals in Solution

    NASA Astrophysics Data System (ADS)

    Vekilov, Peter G.

    2010-07-01

    Solution crystallization is an essential part of processes in the chemical and pharmaceutical industries and a major step in physiological and pathological phenomena. Crystallization starts with nucleation and control of nucleation is crucial for the control of the number, size, perfection, polymorphism and other characteristics of the crystalline materials. Recently, there have been significant advances in the understanding of the mechanism of nucleation of crystals in solution. The most significant of these is the two-step mechanism of nucleation, according to which the crystalline nucleus appears inside pre-existing metastable clusters of size several hundred nanometers, which consist of dense liquid and are suspended in the solution. While initially proposed for protein crystals, the applicability of this mechanism has been demonstrated for small molecule organic materials, colloids, and biominerals. This mechanism helps to explain several long-standing puzzles of crystal nucleation in solution: nucleation rates which are many orders of magnitude lower than theoretical predictions, nucleation kinetic dependencies with steady or receding parts at increasing supersaturation, the role of heterogeneous substrates for polymorph selection, the significance of the dense protein liquid, and others. More importantly, this mechanism provides powerful tools for control of the nucleation process by varying the solution thermodynamic parameters so that the volume occupied by the dense liquid shrinks or expands.

  14. SODIUM ALUMINOSILICATE FOULING AND CLEANING OF DECONTAMINATED SALT SOLUTION COALESCERS

    SciTech Connect

    Poirier, M; Thomas Peters, T; Fernando Fondeur, F; Samuel Fink, S

    2008-10-28

    During initial non-radioactive operations at the Modular Caustic Side Solvent Extraction Unit (MCU), the pressure drop across the decontaminated salt solution coalescer reached {approx}10 psi while processing {approx}1250 gallons of salt solution, indicating possible fouling or plugging of the coalescer. An analysis of the feed solution and the 'plugged coalescer' concluded that the plugging was due to sodium aluminosilicate solids. MCU personnel requested Savannah River National Laboratory (SRNL) to investigate the formation of the sodium aluminosilicate solids (NAS) and the impact of the solids on the decontaminated salt solution coalescer. Researchers performed developmental testing of the cleaning protocols with a bench-scale coalescer container 1-inch long segments of a new coalescer element fouled using simulant solution. In addition, the authors obtained a 'plugged' Decontaminated Salt Solution coalescer from non-radioactive testing in the MCU and cleaned it according to the proposed cleaning procedure. Conclusions from this testing include the following: (1) Testing with the bench-scale coalescer showed an increase in pressure drop from solid particles, but the increase was not as large as observed at MCU. (2) Cleaning the bench-scale coalescer with nitric acid reduced the pressure drop and removed a large amount of solid particles (11 g of bayerite if all aluminum is present in that form or 23 g of sodium aluminosilicate if all silicon is present in that form). (3) Based on analysis of the cleaning solutions from bench-scale test, the 'dirt capacity' of a 40 inch coalescer for the NAS solids tested is calculated as 450-950 grams. (4) Cleaning the full-scale coalescer with nitric acid reduced the pressure drop and removed a large amount of solid particles (60 g of aluminum and 5 g of silicon). (5) Piping holdup in the full-scale coalescer system caused the pH to differ from the target value. Comparable hold-up in the facility could lead to less effective

  15. Chemical Compatibility Testing Final Report Including Test Plans and Procedures

    SciTech Connect

    NIMITZ,JONATHAN S.; ALLRED,RONALD E.; GORDON,BRENT W.; NIGREY,PAUL J.; MCCONNELL,PAUL E.

    2001-07-01

    This report provides an independent assessment of information on mixed waste streams, chemical compatibility information on polymers, and standard test methods for polymer properties. It includes a technology review of mixed low-level waste (LLW) streams and material compatibilities, validation for the plan to test the compatibility of simulated mixed wastes with potential seal and liner materials, and the test plan itself. Potential packaging materials were reviewed and evaluated for compatibility with expected hazardous wastes. The chemical and physical property measurements required for testing container materials were determined. Test methodologies for evaluating compatibility were collected and reviewed for applicability. A test plan to meet US Department of Energy and Environmental Protection Agency requirements was developed. The expected wastes were compared with the chemical resistances of polymers, the top-ranking polymers were selected for testing, and the most applicable test methods for candidate seal and liner materials were determined. Five recommended solutions to simulate mixed LLW streams are described. The test plan includes descriptions of test materials, test procedures, data collection protocols, safety and environmental considerations, and quality assurance procedures. The recommended order of testing to be conducted is specified.

  16. The Henry semianalytical solution for saltwater intrusion with reduced dispersion

    NASA Astrophysics Data System (ADS)

    Zidane, Ali; Younes, Anis; Huggenberger, Peter; Zechner, Eric

    2012-06-01

    The Henry semianalytical solution for salt water intrusion is widely used for benchmarking density dependent flow codes. The method consists of replacing the stream function and the concentration by a double set of Fourier series. These series are truncated at a given order and the remaining coefficients are calculated by solving a highly nonlinear system of algebraic equations. The solution of this system is often subject to substantial numerical difficulties. Previous works succeeded to provide semianalytical solutions only for saltwater intrusion problems with unrealistic large amount of dispersion. In this work, different truncations for the Fourier series are tested and the Levenberg-Marquardt algorithm, which has a quadratic rate of convergence, is applied to calculate their coefficients. The obtained results provide semianalytical solutions for the Henry problem in the case of reduced dispersion coefficients and for two freshwater recharge values: the initial value suggested by Henry (1964) and the reduced one suggested by Simpson and Clement (2004). The developed semianalytical solutions are compared against numerical results obtained by using the method of lines and advanced spatial discretization schemes. The obtained semianalytical solutions improve considerably the worthiness of the Henry problem and therefore, they are more suitable for testing density dependent flow codes.

  17. Experimental study of the continuous casting of a binary solution

    SciTech Connect

    DeZego, S.; Jones, K. Jr.; Burton, R.; Yang, G.; Dong, Z.; Ebadian, M.A.

    1995-12-31

    Continuous casting is currently the primary method for producing sheet metal, plastic and other materials. Here, a laboratory scale test facility has been designed to simulate solidification by using binary solutions (NH{sub 4}Cl-H{sub 2}O). The solid/liquid front evolution and the temperature distributions were recorded during the tests. Solidification for 10% and 30% NH{sub 4}Cl-H{sub 2}O solutions were conducted. The results showed totally different behavior of the solidification process between the two solutions. After reaching steady state, the hypoeutectic solution illustrated thick columnar dendrites in the mushy zone, with U-shaped temperature contours. It indicated that the warm fluid that was added penetrated deep along the centerline. On the other hand, the hypereutectic solution produced a wide open liquid pool, with short dendrites on the side walls. There existed a deep loose mushy zone at the bottom of the liquid pool, which was formed by the settling of equiaxed dendrites. Temperature gradients along the center line were observed for the hypereutectic solution due to the existence of stratified layers in the liquid pool.

  18. A tire contact solution technique

    NASA Technical Reports Server (NTRS)

    Tielking, J. T.

    1983-01-01

    An efficient method for calculating the contact boundary and interfacial pressure distribution was developed. This solution technique utilizes the discrete Fourier transform to establish an influence coefficient matrix for the portion of the pressurized tire surface that may be in the contact region. This matrix is used in a linear algebra algorithm to determine the contact boundary and the array of forces within the boundary that are necessary to hold the tire in equilibrium against a specified contact surface. The algorithm also determines the normal and tangential displacements of those points on the tire surface that are included in the influence coefficient matrix. Displacements within and outside the contact region are calculated. The solution technique is implemented with a finite-element tire model that is based on orthotropic, nonlinear shell of revolution elements which can respond to nonaxisymmetric loads. A sample contact solution is presented.

  19. Demonstration of FRET in solutions

    NASA Astrophysics Data System (ADS)

    Shah, Sunil; Gryczynski, Zygmunt; Chib, Rahul; Fudala, Rafal; Baxi, Aatmun; Borejdo, Julian; Synak, Anna; Gryczynski, Ignacy

    2016-03-01

    We measured the Förster resonance energy transfer (FRET) from Uranin (U) donor to Rhodamine 101 (R101) acceptor in propylene glycol. Steady-state fluorescence measurements show a significant difference between mixed and unmixed fluorophore solutions. In the solution with mixed fluorophores, fluorescence intensity of the U donor decreases and intensity of R101 fluorescence increases. This is visualized as a color change from green to orange. Fluorescence anisotropy of the mixture solution increases in the donor emission wavelength region and decreases in the acceptor emission wavelengths; which is consistent with FRET occurrence. Time-resolved (lifetime) measurements show a decrease of the U lifetime in the presence of R101 acceptor. In the intensity decay of R101 acceptor appears a negative component indicating excited state process. All these measurements prove the presence of FRET in U/R101 mixture fluorescence.

  20. Protein aggregation in salt solutions

    PubMed Central

    Kastelic, Miha; Kalyuzhnyi, Yurij V.; Hribar-Lee, Barbara; Dill, Ken A.; Vlachy, Vojko

    2015-01-01

    Protein aggregation is broadly important in diseases and in formulations of biological drugs. Here, we develop a theoretical model for reversible protein–protein aggregation in salt solutions. We treat proteins as hard spheres having square-well-energy binding sites, using Wertheim’s thermodynamic perturbation theory. The necessary condition required for such modeling to be realistic is that proteins in solution during the experiment remain in their compact form. Within this limitation our model gives accurate liquid–liquid coexistence curves for lysozyme and γ IIIa-crystallin solutions in respective buffers. It provides good fits to the cloud-point curves of lysozyme in buffer–salt mixtures as a function of the type and concentration of salt. It than predicts full coexistence curves, osmotic compressibilities, and second virial coefficients under such conditions. This treatment may also be relevant to protein crystallization. PMID:25964322

  1. Silicon oxidation in fluoride solutions

    NASA Technical Reports Server (NTRS)

    Sancier, K. M.; Kapur, V.

    1980-01-01

    Silicon is produced in a NaF, Na2SiF6, and Na matrix when SiF4 is reduced by metallic sodium. Hydrogen is evolved during acid leaching to separate the silicon from the accompanying reaction products, NaF and Na2SiF6. The hydrogen evolution reaction was studied under conditions simulating leaching conditions by making suspensions of the dry silicon powder in aqueous fluoride solutions. The mechanism for the hydrogen evolution is discussed in terms of spontaneous oxidation of silicon resulting from the cooperative effects of (1) elemental sodium in the silicon that reacts with water to remove a protective silica layer, leaving clean reactive silicon, and (2) fluoride in solution that complexes with the oxidized silicon in solution and retards formation of a protective hydrous oxide gel.

  2. Protein aggregation in salt solutions.

    PubMed

    Kastelic, Miha; Kalyuzhnyi, Yurij V; Hribar-Lee, Barbara; Dill, Ken A; Vlachy, Vojko

    2015-05-26

    Protein aggregation is broadly important in diseases and in formulations of biological drugs. Here, we develop a theoretical model for reversible protein-protein aggregation in salt solutions. We treat proteins as hard spheres having square-well-energy binding sites, using Wertheim's thermodynamic perturbation theory. The necessary condition required for such modeling to be realistic is that proteins in solution during the experiment remain in their compact form. Within this limitation our model gives accurate liquid-liquid coexistence curves for lysozyme and γ IIIa-crystallin solutions in respective buffers. It provides good fits to the cloud-point curves of lysozyme in buffer-salt mixtures as a function of the type and concentration of salt. It than predicts full coexistence curves, osmotic compressibilities, and second virial coefficients under such conditions. This treatment may also be relevant to protein crystallization.

  3. Catchment controls on solute export

    NASA Astrophysics Data System (ADS)

    Musolff, Andreas; Schmidt, Christian; Selle, Benny; Fleckenstein, Jan H.

    2015-12-01

    Dynamics of solute export from catchments can be classified in terms of chemostatic and chemodynamic export regimes by an analysis of concentration-discharge relationships. Previous studies hypothesized that distinct export regimes emerge from the presence of solute mass stores within the catchment and their connectivity to the stream. However, so far a direct link of solute export to identifiable catchment characteristics is missing. Here we investigate long-term time series of stream water quality and quantity of nine neighboring catchments in Central Germany ranging from relatively pristine mountain catchments to agriculturally dominated lowland catchments, spanning large gradients in land use, geology, and climatic conditions. Given the strong collinearity of catchment characteristics we used partial least square regression analysis to quantify the predictive power of these characteristics for median concentrations and the metrics of export regime. We can show that median concentrations and metrics of the export regimes of major ions and nutrients can indeed be inferred from catchment characteristics. Strongest predictors for median concentrations were the share of arable land, discharge per area, runoff coefficient and available water capacity in the root zone of the catchments. The available water capacity in the root zone, the share of arable land being artificially drained and the topographic gradient were found to be the most relevant predictors for the metrics of export regime. These catchment characteristics can represent the size of solute mass store such as the fraction of arable land being a measure for the store of nitrate. On the other hand, catchment characteristics can be a measure for the connectivity of these solute stores to the stream such as the fraction of tile drained land in the catchments. This study demonstrates the potential of data-driven, top down analyses using simple metrics to classify and better understand dominant controls of

  4. Magnetic Half-Monopole Solutions

    NASA Astrophysics Data System (ADS)

    Teh, Rosy; Lim, Kok-Geng; Koh, Pin-Wai

    2009-07-01

    We present exact SU(2) Yang-Mills-Higgs monopole solutions of one half topological charge. These non-Abelian solutions possess gauge potentials which are singular along either the positive or the negative z-axis and common magnetic fields that are singular only at the origin where the half-monopole is located. These half-monopoles are actually a half Wu-Yang monopole and they can possess a finite point electric charge and become half-dyons. They do not necessarily satisfy the first order Bogomol'nyi equations and they possess infinite energy density at r = 0.

  5. Electrodialysis operation with buffer solution

    DOEpatents

    Hryn, John N.; Daniels, Edward J.; Krumdick, Greg K.

    2009-12-15

    A new method for improving the efficiency of electrodialysis (ED) cells and stacks, in particular those used in chemical synthesis. The process entails adding a buffer solution to the stack for subsequent depletion in the stack during electrolysis. The buffer solution is regenerated continuously after depletion. This buffer process serves to control the hydrogen ion or hydroxide ion concentration so as to protect the active sites of electrodialysis membranes. The process enables electrodialysis processing options for products that are sensitive to pH changes.

  6. Schwarzschild Solution: A Historical Perspective

    NASA Astrophysics Data System (ADS)

    Bartusiak, Marcia

    2016-03-01

    While eighteenth-century Newtonians had imagined a precursor to the black hole, the modern version has its roots in the first full solution to Einstein's equations of general relativity, derived by the German astronomer Karl Schwarzschild on a World War I battlefront just weeks after Einstein introduced his completed theory in November 1915. This talk will demonstrate how Schwarzschild's solution is linked to the black hole and how it took more than half a century for the physics community to accept that such a bizarre celestial object could exist in the universe.

  7. Thermal Treatment of EDTA Solutions

    SciTech Connect

    Denne, B.

    2006-07-01

    Chemical cleaning of commercial nuclear power facility secondary systems, using EDTA, results in large volumes of chelated liquids requiring some form of treatment prior to disposal. The Nuclear Regulatory Commission regulates the presence of chelates in disposal cells and this paper will look at several methods used to ensure compliance with disposal site criteria. The emphasis of this paper will be on results achieved through thermal treatment of chemical cleaning wastes at the Pacific EcoSolutions' (PEcoS) low level and mixed radioactive waste processing facility in Richland, Washington. We will discuss challenges in transportation, receipt, storage, processing, and disposal associated with EDTA solutions and how those challenges are overcome. (author)

  8. Statistical Analysis of CFD Solutions from the Drag Prediction Workshop

    NASA Technical Reports Server (NTRS)

    Hemsch, Michael J.

    2002-01-01

    A simple, graphical framework is presented for robust statistical evaluation of results obtained from N-Version testing of a series of RANS CFD codes. The solutions were obtained by a variety of code developers and users for the June 2001 Drag Prediction Workshop sponsored by the AIAA Applied Aerodynamics Technical Committee. The aerodynamic configuration used for the computational tests is the DLR-F4 wing-body combination previously tested in several European wind tunnels and for which a previous N-Version test had been conducted. The statistical framework is used to evaluate code results for (1) a single cruise design point, (2) drag polars and (3) drag rise. The paper concludes with a discussion of the meaning of the results, especially with respect to predictability, Validation, and reporting of solutions.

  9. Analytical Solution for Reactive Solute Transport Considering Incomplete Mixing

    NASA Astrophysics Data System (ADS)

    Bellin, A.; Chiogna, G.

    2013-12-01

    The laboratory experiments of Gramling et al. (2002) showed that incomplete mixing at the pore scale exerts a significant impact on transport of reactive solutes and that assuming complete mixing leads to overestimation of product concentration in bimolecular reactions. We consider here the family of equilibrium reactions for which the concentration of the reactants and the product can be expressed as a function of the mixing ratio, the concentration of a fictitious non reactive solute. For this type of reactions we propose, in agreement with previous studies, to model the effect of incomplete mixing at scales smaller than the Darcy scale assuming that the mixing ratio is distributed within an REV according to a Beta distribution. We compute the parameters of the Beta model by imposing that the mean concentration is equal to the value that the concentration assumes at the continuum Darcy scale, while the variance decays with time as a power law. We show that our model reproduces the concentration profiles of the reaction product measured in the Gramling et al. (2002) experiments using the transport parameters obtained from conservative experiments and an instantaneous reaction kinetic. The results are obtained applying analytical solutions both for conservative and for reactive solute transport, thereby providing a method to handle the effect of incomplete mixing on multispecies reactive solute transport, which is simpler than other previously developed methods. Gramling, C. M., C. F. Harvey, and L. C. Meigs (2002), Reactive transport in porous media: A comparison of model prediction with laboratory visualization, Environ. Sci. Technol., 36(11), 2508-2514.

  10. Antiscalant properties of Spergularia rubra and Parietaria officinalis aqueous solutions

    NASA Astrophysics Data System (ADS)

    Cheap-Charpentier, Hélène; Gelus, Dominique; Pécoul, Nathalie; Perrot, Hubert; Lédion, Jean; Horner, Olivier; Sadoun, Jonathan; Cachet, Xavier; Litaudon, Marc; Roussi, Fanny

    2016-06-01

    The formation of calcium carbonate in water has important implications in industry. Chemical antiscalant is usually used to control scale depositions. Plant extracts have been recently used as new green antiscalant agents, as they can be easily prepared and are environmentally friendly. In this study, stock aqueous solutions of Spergularia rubra and Parietaria officinalis, two plants used in traditional medicine to treat or prevent urolithiasis, were obtained by infusion. The antiscaling properties of these extracts towards CaCO3 formation were tested by using chronoamperometry and Fast Controlled Precipitation methods. The aqueous solution of S. rubra was further fractionated to isolate compounds of lower polarity. Their efficiency towards CaCO3 precipitation was characterized by Fast Controlled Precipitation method. The inhibiting efficiency of this fractionated solution was greater than that of the stock aqueous solution.

  11. Soil washing of fluorine contaminated soil using various washing solutions.

    PubMed

    Moon, Deok Hyun; Jo, Raehyun; Koutsospyros, Agamemnon; Cheong, Kyung Hoon; Park, Jeong-Hun

    2015-03-01

    Bench-scale soil washing experiments were conducted to remove fluoride from contaminated soils. Five washing solutions including hydrochloric acid (HCl), nitric acid (HNO3), sodium hydroxide (NaOH), sulfuric acid (H2SO4) and tartaric acid (C4H6O6) were tested. The concentration of the washing solutions used ranged from 0.1 to 3 M with a liquid to solid ratio of 10. The soil washing results showed that the most effective washing solution for the removal of fluoride from contaminated soils was HCl. The highest fluoride removal results of approximately 97 % from the contaminated soil were obtained using 3 M HCl. The fluoride removal efficiency of the washing solution increases in the following order: C4H6O6 < NaOH < H2SO4 < HNO3 < HCl.

  12. Reentry-F Flowfield Solutions at 80,000 ft.

    NASA Technical Reports Server (NTRS)

    Wood, William A.; Riley, Christopher J.; Cheatwood, F. McNeil

    1997-01-01

    Three equilibrium-air numerical solutions are presented for the Reentry-F flight-test vehicle at Mach 20, 80,000 Ft. conditions, including turbulent flow predictions. The three solutions are from a thin-layer Navier-Stokes code, coupled thin-layer and parabolized Navier-Stokes codes, and an approximate viscous shock-layer code. Boundary-layer and shock-layer profiles are presented and compared between the three solutions, revealing close agreement between the three solution methods. Notable exceptions to the close agreement, with 7-10 percent discrepancies, occur in the density profiles at the boundary-layer edge, in the boundary-layer velocity profiles, and in the shock-layer profiles in regions influenced by the nose bluntness.

  13. Sodium tetraphenylborate solution stability: A long term study

    SciTech Connect

    Barnes, M.J.

    1992-06-11

    Sodium tetraphenylborata (NaTPB) is a specialty chemical required for the In Tank Precipitation Process (ITP). It precipitates cesium, aiding in the decontamination of high level radioactive waste solutions. Long term stability of aqueous alkaline solutions of NATPB has been investigated. The focus of the investigation is on the relative stabilities of NATPB solutions exposed to varying temperatures and copper concentrations over an extended period of time. Additionally, vendor-supplied samples, incubated at 40{degree}C, were stored for more than a year without decomposing. Collected data demonstrates that in the absence of elevated copper concentrations, NATPB solutions will remain stable for periods of 1 to 2 years (at a minimum) at maximum expected operating conditions (<40{degree}C). Additionally, biuret, (H{sub 2}NCO){sub 2}NH, was tested as an additive to prevent copper-induced decomposition without success.

  14. Sodium tetraphenylborate solution stability: A long term study

    SciTech Connect

    Barnes, M.J.

    1992-06-11

    Sodium tetraphenylborata (NaTPB) is a specialty chemical required for the In Tank Precipitation Process (ITP). It precipitates cesium, aiding in the decontamination of high level radioactive waste solutions. Long term stability of aqueous alkaline solutions of NATPB has been investigated. The focus of the investigation is on the relative stabilities of NATPB solutions exposed to varying temperatures and copper concentrations over an extended period of time. Additionally, vendor-supplied samples, incubated at 40[degree]C, were stored for more than a year without decomposing. Collected data demonstrates that in the absence of elevated copper concentrations, NATPB solutions will remain stable for periods of 1 to 2 years (at a minimum) at maximum expected operating conditions (<40[degree]C). Additionally, biuret, (H[sub 2]NCO)[sub 2]NH, was tested as an additive to prevent copper-induced decomposition without success.

  15. Finger Growth in Surfactant Solution in Hele-Shaw Cells

    NASA Astrophysics Data System (ADS)

    Yamamoto, Takehiro; Yamashita, Atsushi; Nakamura, Yousuke; Hashimoto, Takamasa; Mori, Noriyasu

    2006-05-01

    Viscous fingering in surfactant solutions was experimentally studied. Aqueous solutions of cetyltrimethylammonium bromide (CTAB) with sodium salicylate (NaSal) as a counter ion were used as test fluids. Excess of counter ion was added into a surfactant solution of CTAB to configure network structures of wormlike micelles. The experiments were mainly carried out using a square Hele-Shaw cell. The structure of fingering pattern was dimensionally analyzed to classify the patterns into three types. In addition, growth phenomena distinguishing for the viscous finger in the CTAB/NaSal solutions were observed: surface instabilities with dendrites, and a sudden protrusion from a cuspidate shaped finger tip. The dependence of the sudden protrusion on the shear rate was confirmed by the experiment using a rectangular cell.

  16. Testing technology

    SciTech Connect

    Not Available

    1993-10-01

    This bulletin from Sandia National Laboratories presents current research highlights in testing technology. Ion microscopy offers new nondestructive testing technique that detects high resolution invisible defects. An inexpensive thin-film gauge checks detonators on centrifuge. Laser trackers ride the range and track helicopters at low-level flights that could not be detected by radar. Radiation transport software predicts electron/photon effects via cascade simulation. Acoustic research in noise abatement will lead to quieter travelling for Bay Area Rapid Transport (BART) commuters.

  17. OPC Paste Samples Exposed To Aggressive Solutions. Cementitious Barriers Partnership

    SciTech Connect

    Langton, C.

    2014-11-01

    The study presented in this report focused on a low-activity wasteform containing a high-pH pore solution with a significant level of sulfate. The purpose of the study was to improve understanding of the complex concrete/wasteform reactive transport problem, in particular, the role of pH in sulfate attack. Paste samples prepared at three different water-to-cement ratios were tested. The mixtures were prepared with ASTM Type I cement, without additional admixtures. The samples were exposed to two different sodium sulfate contact solutions. The first solution was prepared at 0.15M Na2SO4. The second solution also incorporated 0.5M NaOH, to mimic the high pH conditions found in Saltstone. The data collected indicated that, in Na2SO4 solution, damage occurs to the pastes. In the case of the high-pH sulfate solution (Na2SO4 + NaOH), no signs of damage were observed on any of the paste mixtures. These results indicate that the high sulfate content found in the wasteform pore solution will not necessarily lead to severe damage to concrete. Good-quality mixtures could thus prove durable over the long term, and act as an effective barrier to prevent radionuclides from reaching the environment.

  18. New excised-leaf assay method to test inoculativity of Asian citrus psyllid (Hemiptera: Psyllidae) with Candidatus Liberibacter asiaticus associated with citrus huanglongbing disease.

    PubMed

    Ammar, El-Desouky; Walter, Abigail J; Hall, David G

    2013-02-01

    The Asian citrus psyllid, Diaphorina citri Kuwayama (Hemiptera: Psyllidae), is the primary vector of Candidatus Liberibacter asiaticus (Las) associated with huanglongbing, or citrus greening, the most devastating citrus (Citrus spp.) disease worldwide. Here, we developed a new "excised-leaf assay" that can speed up Las-inoculativity tests on Asian citrus psyllid from the current 3-12 mo (when using whole citrus seedlings for inoculation) to only 2-3 wk. Young adults of Asian citrus psyllid that had been reared on Las-infected plants were caged on excised healthy sweet orange [Citrus sinensis (L.) Osbeck] leaves for a 1-2-wk inoculation access periods (IAP), and then both psyllids and leaves were tested later by quantitative polymerase chain reaction (PCR). When single adults were tested per leaf, percentages of Las-positive leaves averaged 2-6% by using HLBaspr primers and 10-20% by using the more sensitive LJ900 primers. Higher proportions of Las-positive leaves were obtained with 1) higher densities of inoculating psyllids (5-10 adults per leaf), 2) longer IAPs, and 3) incubation of leaves for 1 wk postinoculation before PCR. Logistic regression analysis indicated a positive correlation between Las titer in Asian citrus psyllid adults tested singly and the probability of detecting Las in the inoculated leaves, correlations that can be very useful in epidemiological studies. Comparison between excised leaves and whole seedlings, inoculated consecutively for 1 wk each by one or a group of psyllids, indicated no significant difference between Las detection in excised leaves or whole plants. This new excised-leaf assay method saves considerable time, materials, and greenhouse space, and it may enhance vector relation and epidemiological studies on Las and potentially other Liberibacter spp. associated with huanglongbing disease.

  19. Precipitation of neptunium dioxide from aqueous solution

    SciTech Connect

    Roberts, K E

    1999-12-01

    Tens of thousands of metric tons of highly radioactive, nuclear waste have been generated in the US. Currently, there is no treatment or disposal facility for these wastes. Of the radioactive elements in high-level nuclear waste, neptunium (Np) is of particular concern because it has a long half-life and may potentially be very mobile in groundwaters associated with a proposed underground disposal site at Yucca Mountain, Nevada. Aqueous Np concentrations observed in previous, short-term solubility experiments led to calculated potential doses exceeding proposed long-term regulatory limits. However, thermodynamic data for Np at 25 C showed that these observed aqueous Np concentrations were supersaturated with respect to crystalline NpO{sub 2}. It was hypothesized that NpO{sub 2} is the thermodynamically stable solid phase in aqueous solution, but it is slow to form in an aqueous solution of NpO{sub 2}{sup +} on the time scale of previous experiments. The precipitation of NpO{sub 2} would provide significantly lower aqueous Np concentrations leading to calculated doses below proposed regulatory limits. To test this hypothesis, solubility experiments were performed at elevated temperature to accelerate any slow precipitation kinetics. Ionic NpO{sub 2}{sup +} (aq) was introduced into very dilute aqueous solutions of NaCl with initial pH values ranging from 6 to 10. The reaction vessels were placed in an oven and allowed to react at 200 C until steady-state aqueous Np concentrations were observed. In all cases, aqueous Np concentrations decreased significantly from the initial value of 10{sup {minus}4} M. The solids that formed were analyzed by x-ray powder diffraction, x-ray absorption spectroscopy, and scanning electron microscopy. The solids were determined to be high-purity crystals of NpO{sub 2}. This is the first time that crystalline NpO{sub 2} has been observed to precipitate from NpO{sub 2}{sup +}(aq) in near-neutral aqueous solutions. The results obtained

  20. Space Electronic Test Engineering

    NASA Technical Reports Server (NTRS)

    Chambers, Rodney D.

    2004-01-01

    The Space Power and Propulsion Test Engineering Branch at NASA Glenn Research center has the important duty of controlling electronic test engineering services. These services include test planning and early assessment of Space projects, management and/or technical support required to safely and effectively prepare the article and facility for testing, operation of test facilities, and validation/delivery of data to customer. The Space Electronic Test Engineering Branch is assigned electronic test engineering responsibility for the GRC Space Simulation, Microgravity, Cryogenic, and Combustion Test Facilities. While working with the Space Power and Propulsion Test Engineering Branch I am working on several different assignments. My primary assignment deals with an electrical hardware unit known as Sunny Boy. Sunny Boy is a DC load Bank that is designed for solar arrays in which it is used to convert DC power form the solar arrays into AC power at 60 hertz to pump back into the electricity grid. However, there are some researchers who decided that they would like to use the Sunny Boy unit in a space simulation as a DC load bank for a space shuttle or even the International Space Station hardware. In order to do so I must create a communication link between a computer and the Sunny Boy unit so that I can preset a few of the limits (such power, set & constant voltage levels) that Sunny Boy will need to operate using the applied DC load. Apart from this assignment I am also working on a hi-tech circuit that I need to have built at a researcher s request. This is a high voltage analog to digital circuit that will be used to record data from space ion propulsion rocket booster tests. The problem that makes building this circuit so difficult is that it contains high voltage we must find a way to lower the voltage signal before the data is transferred into the computer to be read. The solution to this problem was to transport the signal using infrared light which will lower