Science.gov

Sample records for 2011-07-01 false seals

  1. 30 CFR 75.339 - Seals records.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Seals records. 75.339 Section 75.339 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.339 Seals records. (a) The table entitled “Seal.... Table—§ 75.339(a) Seal Recordkeeping Requirements Record Section reference Retention time (1)...

  2. 36 CFR 901.6 - Seal.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Seal. 901.6 Section 901.6... CORPORATION § 901.6 Seal. The Corporation may adopt a corporate seal which shall have the name of the Corporation and year of incorporation printed upon it. The seal may be used by causing it or a...

  3. 28 CFR 803.3 - Use of the seal.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Use of the seal. 803.3 Section 803.3... SEAL § 803.3 Use of the seal. (a) The Agency seal is used by Agency staff for official agency business as approved by the appropriate Director or designee. (b) Use of the Agency seal by any person...

  4. 28 CFR 803.2 - Authority to affix seal.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Authority to affix seal. 803.2 Section... COLUMBIA AGENCY SEAL § 803.2 Authority to affix seal. The Director of CSOSA or PSA (as appropriate) and the Director's designees are authorized to affix the Agency seal (including replicas and reproductions)...

  5. 28 CFR 0.146 - Seals.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 1 2011-07-01 2011-07-01 false Seals. 0.146 Section 0.146 Judicial... Personnel and Certain Administrative Matters § 0.146 Seals. The Director of the Federal Bureau of... the U.S. Marshals Service shall each have custody of the seal pertaining to his...

  6. 29 CFR 4002.11 - Seal.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 9 2011-07-01 2011-07-01 false Seal. 4002.11 Section 4002.11 Labor Regulations Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION GENERAL BYLAWS OF THE PENSION BENEFIT GUARANTY CORPORATION § 4002.11 Seal. The seal of the Corporation shall be in such form as may be approved from time...

  7. 40 CFR Table 26 to Subpart G of... - Seal Related Factors for Internal Floating Roof Vessels

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 9 2011-07-01 2011-07-01 false Seal Related Factors for Internal Floating Roof Vessels 26 Table 26 to Subpart G of Part 63 Protection of Environment ENVIRONMENTAL... Internal Floating Roof Vessels Seal type KS n Liquid mounted resilient seal: Primary seal only 3.0 0...

  8. 40 CFR 147.3103 - Fluid seals.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Fluid seals. 147.3103 Section 147.3103 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE... Tribes § 147.3103 Fluid seals. Notwithstanding §§ 144.28(f)(2) and 146.12(c) of this chapter, owners...

  9. 36 CFR 1200.4 - How does NARA use its official seals?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false How does NARA use its official seals? 1200.4 Section 1200.4 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION GENERAL RULES OFFICIAL SEALS How are NARA's Official Seals and Logos Designed and Used? §...

  10. 36 CFR 1200.2 - How is each NARA seal designed?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false How is each NARA seal designed? 1200.2 Section 1200.2 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION GENERAL RULES OFFICIAL SEALS How are NARA's Official Seals and Logos Designed and Used? §...

  11. 29 CFR 2200.108 - Official Seal of the Occupational Safety and Health Review Commission.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 9 2011-07-01 2011-07-01 false Official Seal of the Occupational Safety and Health Review... HEALTH REVIEW COMMISSION RULES OF PROCEDURE Miscellaneous Provisions § 2200.108 Official Seal of the Occupational Safety and Health Review Commission. The seal of the Commission shall consist of: A gold...

  12. 32 CFR 765.14 - Unofficial use of the seal, emblem, names, or initials of the Marine Corps.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) DEPARTMENT OF THE NAVY MISCELLANEOUS RULES RULES APPLICABLE TO THE PUBLIC § 765.14 Unofficial use of the seal... 32 National Defense 5 2011-07-01 2011-07-01 false Unofficial use of the seal, emblem, names, or... to grant permission to use or imitate the seal, emblem, names, or initials of the Marine Corps...

  13. 30 CFR 816.13 - Casing and sealing of drilled holes: General requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Casing and sealing of drilled holes: General...-SURFACE MINING ACTIVITIES § 816.13 Casing and sealing of drilled holes: General requirements. Each exploration hole, other drill or borehole, well, or other exposed underground opening shall be cased,...

  14. 30 CFR 816.15 - Casing and sealing of drilled holes: Permanent.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Casing and sealing of drilled holes: Permanent...-SURFACE MINING ACTIVITIES § 816.15 Casing and sealing of drilled holes: Permanent. When no longer needed... environmental or health and safety effect, or unless approved for transfer as a water well under § 816.41,...

  15. 30 CFR 816.14 - Casing and sealing of drilled holes: Temporary.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Casing and sealing of drilled holes: Temporary...-SURFACE MINING ACTIVITIES § 816.14 Casing and sealing of drilled holes: Temporary. Each exploration hole... approved permit application for use to return coal processing waste or water to underground workings, or...

  16. 30 CFR 75.1711-2 - Sealing of slope or drift openings.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Sealing of slope or drift openings. 75.1711-2 Section 75.1711-2 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE... slope or drift openings. Slope or drift openings required to be sealed under § 75.1711 shall be...

  17. 39 CFR 3007.10 - Submission of non-public materials under seal.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 39 Postal Service 1 2011-07-01 2011-07-01 false Submission of non-public materials under seal. 3007.10 Section 3007.10 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL TREATMENT OF NON-PUBLIC MATERIALS PROVIDED BY THE POSTAL SERVICE § 3007.10 Submission of non-public materials under seal. (a)...

  18. 33 CFR 183.536 - Seals and gaskets in fuel filters and strainers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Seals and gaskets in fuel filters and strainers. 183.536 Section 183.536 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF... Standards § 183.536 Seals and gaskets in fuel filters and strainers. (a) (b) Each gasket and each...

  19. 30 CFR 75.1101-17 - Sealing of dry powder chemical systems.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Sealing of dry powder chemical systems. 75.1101-17 Section 75.1101-17 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...-17 Sealing of dry powder chemical systems. Each dry powder chemical system shall be adequately...

  20. 33 CFR 334.10 - Gulf of Maine off Seal Island, Maine; naval aircraft bombing target area.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Gulf of Maine off Seal Island... REGULATIONS § 334.10 Gulf of Maine off Seal Island, Maine; naval aircraft bombing target area. (a) The danger zone. A circular area with a radius of 1.5 nautical miles, having its center just easterly of...

  1. 32 CFR 150.1 - Name and seal.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 1 2011-07-01 2011-07-01 false Name and seal. 150.1 Section 150.1 National... JUSTICE COURTS OF CRIMINAL APPEALS RULES OF PRACTICE AND PROCEDURE § 150.1 Name and seal. (a) The titles... Criminal Appeals.” (2) “United States Navy-Marine Corps Court of Criminal Appeals.” (3) “United States...

  2. 30 CFR 57.22217 - Seals and stoppings (I-A, I-B, and I-C mines).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Seals and stoppings (I-A, I-B, and I-C mines). 57.22217 Section 57.22217 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF... stoppings (I-A, I-B, and I-C mines). All seals, and those stoppings that separate main intake from...

  3. 30 CFR 281.5 - False statements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false False statements. 281.5 Section 281.5 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE LEASING OF MINERALS OTHER THAN OIL, GAS, AND SULPHUR IN THE OUTER CONTINENTAL SHELF General §...

  4. 38 CFR 21.9740 - False, late, or missing reports.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2011-07-01 2011-07-01 false False, late, or missing reports. 21.9740 Section 21.9740 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VOCATIONAL REHABILITATION AND EDUCATION Post-9/11 GI Bill Pursuit of Courses § 21.9740...

  5. 29 CFR 1602.33 - Penalty for making of willfully false statements on report.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Government Information Report § 1602.33 Penalty for making of willfully false statements on report. The making of willfully false statements on report EEO-4, is a violation of the United States Code, title 18... 29 Labor 4 2011-07-01 2011-07-01 false Penalty for making of willfully false statements on...

  6. 29 CFR 1602.23 - Penalty for making of willfully false statements on reports.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 4 2011-07-01 2011-07-01 false Penalty for making of willfully false statements on reports. 1602.23 Section 1602.23 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION RECORDKEEPING AND REPORTING REQUIREMENTS UNDER TITLE VII, THE ADA AND GINA Local Union...

  7. 29 CFR 1602.16 - Penalty for making of willfully false statements on report.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 4 2011-07-01 2011-07-01 false Penalty for making of willfully false statements on report. 1602.16 Section 1602.16 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION RECORDKEEPING AND REPORTING REQUIREMENTS UNDER TITLE VII, THE ADA AND GINA...

  8. 29 CFR 1602.8 - Penalty for making of willfully false statements on report.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 4 2011-07-01 2011-07-01 false Penalty for making of willfully false statements on report. 1602.8 Section 1602.8 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION RECORDKEEPING AND REPORTING REQUIREMENTS UNDER TITLE VII, THE ADA AND GINA Employer...

  9. False-Positive PET/CT After Cyanoacrylate Sealing of a Pancreaticojejunostomy.

    PubMed

    Belyaev, Orlin; Munding, Johanna; Tannapfel, Andrea; Uhl, Waldemar

    2015-05-01

    In 2013, a 68-year-old male had a pancreaticoduodenectomy for pancreatic cancer. The pancreaticojejunostomy was sealed with cyanoacrylate (Dermabond) to prevent postoperative pancreatic fistula. Local recurrence of malignancy at the anastomosis was suspected 18 months later in PET/CT. Surgical revision was performed and anastomosis resected. However, histology showed no tumor recurrence, but strong inflammation and foreign-body reaction towards Dermabond. The sealant caused false-positive PET/CT findings, so its use in oncologic surgery should be abandoned.

  10. 36 CFR 1200.7 - What are NARA logos and how are they used?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false What are NARA logos and how... ADMINISTRATION GENERAL RULES OFFICIAL SEALS How are NARA's Official Seals and Logos Designed and Used? § 1200.7 What are NARA logos and how are they used? (a) Agency logo. NARA has one official agency logo, which...

  11. 34 CFR 3.1 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 1 2011-07-01 2011-07-01 false Definitions. 3.1 Section 3.1 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.1 Definitions. For the purposes of this part: (a) ED...) Reproduction means a copy of the Official Seal displaying the form and content, reproduced in only one...

  12. 40 CFR 194.46 - Removal of waste.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Removal of waste. 194.46 Section 194.46 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION PROTECTION... mining the sealed disposal system, given technology levels at the time a compliance application...

  13. 40 CFR 63.1028 - Agitators in gas and vapor service and in light liquid service standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 10 2011-07-01 2011-07-01 false Agitators in gas and vapor service and... Standards § 63.1028 Agitators in gas and vapor service and in light liquid service standards. (a) Compliance... in the referencing subpart. (b) (c) Leak detection—(1) Monitoring method. Each agitator seal shall...

  14. 40 CFR 65.109 - Standards: Agitators in gas/vapor service and in light liquid service.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 15 2011-07-01 2011-07-01 false Standards: Agitators in gas/vapor... Standards: Agitators in gas/vapor service and in light liquid service. (a) Compliance schedule. The owner or...) Leak detection—(1) Monitoring method. Each agitator seal shall be monitored monthly to detect leaks...

  15. 40 CFR 63.1009 - Agitators in gas and vapor service and in light liquid service standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 10 2011-07-01 2011-07-01 false Agitators in gas and vapor service and... § 63.1009 Agitators in gas and vapor service and in light liquid service standards. (a) Compliance... in the referencing subpart. (b) Leak detection—(1) Monitoring method. Each agitator seal shall...

  16. 40 CFR 35.936-18 - Negotiation of subagree-ments.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Negotiation of subagree-ments. 35.936... § 35.936-18 Negotiation of subagree-ments. (a) Formal advertising, with adequate purchase descriptions, sealed bids, and public openings shall be the required method of procurement unless negotiation...

  17. 40 CFR 61.133 - Standard: Light-oil sumps.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Standard: Light-oil sumps. 61.133... Emissions from Coke By-Product Recovery Plants § 61.133 Standard: Light-oil sumps. (a) Each owner or operator of a light-oil sump shall enclose and seal the liquid surface in the sump to form a closed...

  18. 31 CFR 361.4 - Preparation of shipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false Preparation of shipment. 361.4 Section... § 361.4 Preparation of shipment. Each shipment shall be inspected and verified by two responsible employees of a consignor before final preparation (i.e., before sealing, locking, etc.) for delivery to...

  19. 30 CFR 7.104 - Internal static pressure test.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Internal static pressure test. 7.104 Section 7... Internal static pressure test. (a) Test procedures. (1) Isolate and seal each segment of the intake system... system or exhaust system to four times the maximum pressure observed in each segment during the tests...

  20. 40 CFR 63.1007 - Pumps in light liquid service standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 10 2011-07-01 2011-07-01 false Pumps in light liquid service... (CONTINUED) National Emission Standards for Equipment Leaks-Control Level 1 § 63.1007 Pumps in light liquid... inspection each calendar week for indications of liquids dripping from the pump seal. The owner or...

  1. 40 CFR 1060.105 - What diurnal requirements apply for equipment?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 33 2011-07-01 2011-07-01 false What diurnal requirements apply for equipment? 1060.105 Section 1060.105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...-system components must meet the following requirements: (1) They must be self-sealing when detached...

  2. 32 CFR 724.112 - Clemency discharge.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 5 2011-07-01 2011-07-01 false Clemency discharge. 724.112 Section 724.112 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL NAVAL DISCHARGE REVIEW... it serves to change, seal, erase or in any way modify the individual's past military...

  3. 36 CFR 1004.14 - Open container of alcoholic beverage.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... SAFETY § 1004.14 Open container of alcoholic beverage. (a) Each person within a motor vehicle is... receptacle containing an alcoholic beverage that is open, or has been opened, or whose seal is broken or the... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Open container of...

  4. 40 CFR 60.488 - Reconstruction.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Reconstruction. 60.488 Section 60.488 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF... that would be required to construct a comparable new facility” under § 60.15: pump seals, nuts...

  5. 40 CFR 60.506 - Reconstruction.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Reconstruction. 60.506 Section 60.506 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF... facility” under § 60.15: pump seals, loading arm gaskets and swivels, coupler gaskets, overfill...

  6. 40 CFR 60.488a - Reconstruction.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Reconstruction. 60.488a Section 60.488a Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF... construct a comparable new facility” under § 60.15: Pump seals, nuts and bolts, rupture disks, and...

  7. Seals and Sealing Techniques

    NASA Technical Reports Server (NTRS)

    1972-01-01

    Developments by the aerospace industry in seals and sealing techniques are announced for possible use in other areas. The announcements presented are grouped as: sealing techniques for cryogenic fluids, high pressure applications, and modification for improved performance.

  8. 30 CFR 57.8535 - Seals.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ....8535 Seals. Seals shall be provided with a means for checking the quality of air behind the seal and a means to prevent a water head from developing unless the seal is designed to impound water. ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Seals. 57.8535 Section 57.8535...

  9. 19 CFR 113.25 - Seals.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Seals. 113.25 Section 113.25 Customs Duties U.S... Bond Requirements § 113.25 Seals. When a seal is required, the seal shall be affixed adjoining the signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to...

  10. 19 CFR 113.25 - Seals.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Seals. 113.25 Section 113.25 Customs Duties U.S... Bond Requirements § 113.25 Seals. When a seal is required, the seal shall be affixed adjoining the signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to...

  11. 19 CFR 113.25 - Seals.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Seals. 113.25 Section 113.25 Customs Duties U.S... Bond Requirements § 113.25 Seals. When a seal is required, the seal shall be affixed adjoining the signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to...

  12. 19 CFR 113.25 - Seals.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Seals. 113.25 Section 113.25 Customs Duties U.S... Bond Requirements § 113.25 Seals. When a seal is required, the seal shall be affixed adjoining the signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to...

  13. 19 CFR 113.25 - Seals.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Seals. 113.25 Section 113.25 Customs Duties U.S... Bond Requirements § 113.25 Seals. When a seal is required, the seal shall be affixed adjoining the signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to...

  14. Acoustic seal

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M. (Inventor)

    2006-01-01

    The invention relates to a sealing device having an acoustic resonator. The acoustic resonator is adapted to create acoustic waveforms to generate a sealing pressure barrier blocking fluid flow from a high pressure area to a lower pressure area. The sealing device permits noncontacting sealing operation. The sealing device may include a resonant-macrosonic-synthesis (RMS) resonator.

  15. Acoustic Seal

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M. (Inventor)

    2006-01-01

    The invention relates to a sealing device having an acoustic resonator. The acoustic resonator is adapted to create acoustic waveforms to generate a sealing pressure barrier blocking fluid flow from a high pressure area to a lower pressure area. The sealing device permits noncontacting sealing operation. The sealing device may include a resonant-macrosonic-synthesis (RMS) resonator.

  16. Glass sealing

    SciTech Connect

    Brow, R.K.; Kovacic, L.; Chambers, R.S.

    1996-04-01

    Hernetic glass sealing technologies developed for weapons component applications can be utilized for the design and manufacture of fuel cells. Design and processing of of a seal are optimized through an integrated approach based on glass composition research, finite element analysis, and sealing process definition. Glass sealing procedures are selected to accommodate the limits imposed by glass composition and predicted calculations.

  17. Coining seal

    DOEpatents

    Mancebo, Lloyd

    1976-01-01

    A bakeable high pressure-vacuum seal is provided in which an inductile sealing element having a butterfly shaped crosssection with protruding sharp edges at each of the four corners, is sandwiched between two ductile sealing elements, the sandwiched assembly then being compressed between the surfaces of the flange elements of a high pressure or high vacuum vessel to coin the ductile sealing element into the surface of the inductile sealing element as well as the surfaces of the flange elements.

  18. Sealing device

    SciTech Connect

    Garcia-Crespo, Andres Jose

    2013-12-10

    A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

  19. 7 CFR 29.35 - Lot seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 2 2012-01-01 2012-01-01 false Lot seal. 29.35 Section 29.35 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.35 Lot seal. A seal approved by the Director for sealing lots...

  20. 36 CFR 901.6 - Seal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Seal. 901.6 Section 901.6... CORPORATION § 901.6 Seal. The Corporation may adopt a corporate seal which shall have the name of the Corporation and year of incorporation printed upon it. The seal may be used by causing it or a...

  1. 14 CFR 65.133 - Seal.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Seal. 65.133 Section 65.133 Aeronautics and...: AIRMEN OTHER THAN FLIGHT CREWMEMBERS Parachute Riggers § 65.133 Seal. Each certificated parachute rigger must have a seal with an identifying mark prescribed by the Administrator, and a seal press....

  2. 9 CFR 381.98 - Official seal.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Official seal. 381.98 Section 381.98... Certificates; Certification Procedures § 381.98 Official seal. The official mark for use in sealing means of... and a serial number as shown below, and any seals approved by the Administrator for applying such...

  3. 30 CFR 75.339 - Seals records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Seals records. 75.339 Section 75.339 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.339 Seals records. (a) The table entitled “Seal.... Table—§ 75.339(a) Seal Recordkeeping Requirements Record Section reference Retention time (1)...

  4. 14 CFR 65.133 - Seal.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Seal. 65.133 Section 65.133 Aeronautics and...: AIRMEN OTHER THAN FLIGHT CREWMEMBERS Parachute Riggers § 65.133 Seal. Each certificated parachute rigger must have a seal with an identifying mark prescribed by the Administrator, and a seal press....

  5. 7 CFR 29.34 - Sample seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 2 2012-01-01 2012-01-01 false Sample seal. 29.34 Section 29.34 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.34 Sample seal. A seal approved by the Director for sealing...

  6. 36 CFR 901.6 - Seal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Seal. 901.6 Section 901.6... CORPORATION § 901.6 Seal. The Corporation may adopt a corporate seal which shall have the name of the Corporation and year of incorporation printed upon it. The seal may be used by causing it or a...

  7. 14 CFR 65.133 - Seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Seal. 65.133 Section 65.133 Aeronautics and...: AIRMEN OTHER THAN FLIGHT CREWMEMBERS Parachute Riggers § 65.133 Seal. Each certificated parachute rigger must have a seal with an identifying mark prescribed by the Administrator, and a seal press....

  8. 46 CFR 501.11 - Official seal.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 9 2011-10-01 2011-10-01 false Official seal. 501.11 Section 501.11 Shipping FEDERAL... Seal § 501.11 Official seal. (a) Description. Pursuant to section 201(c) of the Merchant Marine Act, 1936, as amended (46 U.S.C. 301(d)), the Commission prescribes its official seal, as adopted by...

  9. 7 CFR 29.35 - Lot seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Lot seal. 29.35 Section 29.35 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.35 Lot seal. A seal approved by the Director for sealing lots...

  10. 9 CFR 381.98 - Official seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Official seal. 381.98 Section 381.98... Certificates; Certification Procedures § 381.98 Official seal. The official mark for use in sealing means of... and a serial number as shown below, and any seals approved by the Administrator for applying such...

  11. 19 CFR 101.7 - Customs seal.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Customs seal. 101.7 Section 101.7 Customs Duties U... GENERAL PROVISIONS § 101.7 Customs seal. (a) Design. According to the design furnished by the Department of the Treasury, the Customs seal of the United States shall consist of the seal of the Department...

  12. 7 CFR 29.34 - Sample seal.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Sample seal. 29.34 Section 29.34 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.34 Sample seal. A seal approved by the Director for sealing...

  13. 46 CFR 501.11 - Official seal.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 9 2014-10-01 2014-10-01 false Official seal. 501.11 Section 501.11 Shipping FEDERAL... Seal § 501.11 Official seal. (a) Description. Pursuant to section 201(c) of the Merchant Marine Act, 1936, as amended (46 U.S.C. 301(d)), the Commission prescribes its official seal, as adopted by...

  14. 30 CFR 75.339 - Seals records.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Seals records. 75.339 Section 75.339 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.339 Seals records. (a) The table entitled “Seal.... Table—§ 75.339(a) Seal Recordkeeping Requirements Record Section reference Retention time (1)...

  15. 46 CFR 501.11 - Official seal.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 9 2013-10-01 2013-10-01 false Official seal. 501.11 Section 501.11 Shipping FEDERAL... Seal § 501.11 Official seal. (a) Description. Pursuant to section 201(c) of the Merchant Marine Act, 1936, as amended (46 U.S.C. 301(d)), the Commission prescribes its official seal, as adopted by...

  16. 9 CFR 381.98 - Official seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Official seal. 381.98 Section 381.98... Certificates; Certification Procedures § 381.98 Official seal. The official mark for use in sealing means of... and a serial number as shown below, and any seals approved by the Administrator for applying such...

  17. 46 CFR 501.11 - Official seal.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 9 2012-10-01 2012-10-01 false Official seal. 501.11 Section 501.11 Shipping FEDERAL... Seal § 501.11 Official seal. (a) Description. Pursuant to section 201(c) of the Merchant Marine Act, 1936, as amended (46 U.S.C. 301(d)), the Commission prescribes its official seal, as adopted by...

  18. 14 CFR 65.133 - Seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Seal. 65.133 Section 65.133 Aeronautics and...: AIRMEN OTHER THAN FLIGHT CREWMEMBERS Parachute Riggers § 65.133 Seal. Each certificated parachute rigger must have a seal with an identifying mark prescribed by the Administrator, and a seal press....

  19. 19 CFR 101.7 - Customs seal.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Customs seal. 101.7 Section 101.7 Customs Duties U... GENERAL PROVISIONS § 101.7 Customs seal. (a) Design. According to the design furnished by the Department of the Treasury, the Customs seal of the United States shall consist of the seal of the Department...

  20. 7 CFR 29.35 - Lot seal.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 2 2013-01-01 2013-01-01 false Lot seal. 29.35 Section 29.35 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.35 Lot seal. A seal approved by the Director for sealing lots...

  1. 30 CFR 75.339 - Seals records.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Seals records. 75.339 Section 75.339 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.339 Seals records. (a) The table entitled “Seal.... Table—§ 75.339(a) Seal Recordkeeping Requirements Record Section reference Retention time (1)...

  2. 30 CFR 75.339 - Seals records.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Seals records. 75.339 Section 75.339 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.339 Seals records. (a) The table entitled “Seal.... Table—§ 75.339(a) Seal Recordkeeping Requirements Record Section reference Retention time (1)...

  3. 19 CFR 101.7 - Customs seal.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Customs seal. 101.7 Section 101.7 Customs Duties U... GENERAL PROVISIONS § 101.7 Customs seal. (a) Design. According to the design furnished by the Department of the Treasury, the Customs seal of the United States shall consist of the seal of the Department...

  4. 7 CFR 29.34 - Sample seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Sample seal. 29.34 Section 29.34 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.34 Sample seal. A seal approved by the Director for sealing...

  5. 9 CFR 381.98 - Official seal.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Official seal. 381.98 Section 381.98... Certificates; Certification Procedures § 381.98 Official seal. The official mark for use in sealing means of... and a serial number as shown below, and any seals approved by the Administrator for applying such...

  6. 7 CFR 29.34 - Sample seal.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 2 2013-01-01 2013-01-01 false Sample seal. 29.34 Section 29.34 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.34 Sample seal. A seal approved by the Director for sealing...

  7. 19 CFR 101.7 - Customs seal.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Customs seal. 101.7 Section 101.7 Customs Duties U... GENERAL PROVISIONS § 101.7 Customs seal. (a) Design. According to the design furnished by the Department of the Treasury, the Customs seal of the United States shall consist of the seal of the Department...

  8. 46 CFR 501.11 - Official seal.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 9 2010-10-01 2010-10-01 false Official seal. 501.11 Section 501.11 Shipping FEDERAL... Seal § 501.11 Official seal. (a) Description. Pursuant to section 201(c) of the Merchant Marine Act, 1936, as amended (46 U.S.C. 301(d)), the Commission prescribes its official seal, as adopted by...

  9. 9 CFR 381.98 - Official seal.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Official seal. 381.98 Section 381.98... Certificates; Certification Procedures § 381.98 Official seal. The official mark for use in sealing means of... and a serial number as shown below, and any seals approved by the Administrator for applying such...

  10. 14 CFR 65.133 - Seal.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Seal. 65.133 Section 65.133 Aeronautics and...: AIRMEN OTHER THAN FLIGHT CREWMEMBERS Parachute Riggers § 65.133 Seal. Each certificated parachute rigger must have a seal with an identifying mark prescribed by the Administrator, and a seal press....

  11. 7 CFR 29.35 - Lot seal.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Lot seal. 29.35 Section 29.35 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.35 Lot seal. A seal approved by the Director for sealing lots...

  12. 36 CFR 901.6 - Seal.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Seal. 901.6 Section 901.6... CORPORATION § 901.6 Seal. The Corporation may adopt a corporate seal which shall have the name of the Corporation and year of incorporation printed upon it. The seal may be used by causing it or a...

  13. Security seal

    DOEpatents

    Gobeli, Garth W.

    1985-01-01

    Security for a package or verifying seal in plastic material is provided by a print seal with unique thermally produced imprints in the plastic. If tampering is attempted, the material is irreparably damaged and thus detectable. The pattern of the imprints, similar to "fingerprints" are recorded as a positive identification for the seal, and corresponding recordings made to allow comparison. The integrity of the seal is proved by the comparison of imprint identification records made by laser beam projection.

  14. Seal assembly

    DOEpatents

    Johnson, Roger Neal; Longfritz, William David

    2001-01-01

    A seal assembly that seals a gap formed by a groove comprises a seal body, a biasing element, and a connection that connects the seal body to the biasing element to form the seal assembly. The seal assembly further comprises a concave-shaped center section and convex-shaped contact portions at each end of the seal body. The biasing element is formed from an elastic material and comprises a convex-shaped center section and concave-shaped biasing zones that are opposed to the convex-shaped contact portions. The biasing element is adapted to be compressed to change a width of the seal assembly from a first width to a second width that is smaller than the first width. In the compressed state, the seal assembly can be disposed in the groove. After release of the compressing force, the seal assembly expands. The contact portions will move toward a surface of the groove and the biasing zones will move into contact with another surface of the groove. The biasing zones will bias the contact portions of the seal body against the surface of the groove.

  15. 28 CFR 803.3 - Use of the seal.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Use of the seal. 803.3 Section 803.3... SEAL § 803.3 Use of the seal. (a) The Agency seal is used by Agency staff for official agency business as approved by the appropriate Director or designee. (b) Use of the Agency seal by any person...

  16. 28 CFR 803.3 - Use of the seal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Use of the seal. 803.3 Section 803.3... SEAL § 803.3 Use of the seal. (a) The Agency seal is used by Agency staff for official agency business as approved by the appropriate Director or designee. (b) Use of the Agency seal by any person...

  17. 4 CFR 202.3 - Prohibitions against misuse of seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 4 Accounts 1 2012-01-01 2012-01-01 false Prohibitions against misuse of seal. 202.3 Section 202.3 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.3 Prohibitions against misuse of seal. (a) Falsely making, forging, counterfeiting, mutilating, or altering the Board seal...

  18. 4 CFR 202.3 - Prohibitions against misuse of seal.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 4 Accounts 1 2013-01-01 2013-01-01 false Prohibitions against misuse of seal. 202.3 Section 202.3 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.3 Prohibitions against misuse of seal. (a) Falsely making, forging, counterfeiting, mutilating, or altering the Board seal...

  19. 4 CFR 202.3 - Prohibitions against misuse of seal.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 4 Accounts 1 2011-01-01 2011-01-01 false Prohibitions against misuse of seal. 202.3 Section 202.3 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.3 Prohibitions against misuse of seal. (a) Falsely making, forging, counterfeiting, mutilating, or altering the Board seal...

  20. 4 CFR 202.3 - Prohibitions against misuse of seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 4 Accounts 1 2010-01-01 2010-01-01 false Prohibitions against misuse of seal. 202.3 Section 202.3 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.3 Prohibitions against misuse of seal. (a) Falsely making, forging, counterfeiting, mutilating, or altering the Board seal...

  1. Nozzle seal

    DOEpatents

    Groff, Russell Dennis; Vatovec, Richard John

    1978-06-11

    In an illustrative embodiment of the invention, a nuclear reactor pressure vessel, having an internal hoop from which the heated coolant emerges from the reactor core and passes through to the reactor outlet nozzles, is provided with annular sealing members operatively disposed between the outlet nozzle and the hoop and partly within a retaining annulus formed in the hoop. The sealing members are biased against the pressure vessel and the hoop and one of the sealing members is provided with a piston type pressure ring sealing member which effectively closes the path between the inlet and outlet coolants in the region about the outlet nozzle establishing a leak-proof condition. Furthermore, the flexible responsiveness of the seal assures that the seal will not structurally couple the hoop to the pressure vessel.

  2. Ferrules seals

    DOEpatents

    Smith, James L.

    1984-01-01

    A device is provided for sealing an inner tube and an outer tube without excessively deforming the tubes. The device includes two ferrules which cooperate to form a vacuum-tight seal between the inner tube and outer tube and having mating surfaces such that overtightening is not possible.

  3. Ferrules seals

    DOEpatents

    Smith, J.L.

    1984-07-10

    A device is provided for sealing an inner tube and an outer tube without excessively deforming the tubes. The device includes two ferrules which cooperate to form a vacuum-tight seal between the inner tube and outer tube and having mating surfaces such that overtightening is not possible. 3 figs.

  4. Ceramic Seal.

    SciTech Connect

    Smartt, Heidi A.; Romero, Juan A.; Custer, Joyce Olsen; Hymel, Ross W.; Krementz, Dan; Gobin, Derek; Harpring, Larry; Martinez-Rodriguez, Michael; Varble, Don; DiMaio, Jeff; Hudson, Stephen

    2016-11-01

    Containment/Surveillance (C/S) measures are critical to any verification regime in order to maintain Continuity of Knowledge (CoK). The Ceramic Seal project is research into the next generation technologies to advance C/S, in particular improving security and efficiency. The Ceramic Seal is a small form factor loop seal with improved tamper-indication including a frangible seal body, tamper planes, external coatings, and electronic monitoring of the seal body integrity. It improves efficiency through a self-securing wire and in-situ verification with a handheld reader. Sandia National Laboratories (SNL) and Savannah River National Laboratory (SRNL), under sponsorship from the U.S. National Nuclear Security Administration (NNSA) Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D), have previously designed and have now fabricated and tested Ceramic Seals. Tests have occurred at both SNL and SRNL, with different types of tests occurring at each facility. This interim report will describe the Ceramic Seal prototype, the design and development of a handheld standalone reader and an interface to a data acquisition system, fabrication of the seals, and results of initial testing.

  5. False assumptions.

    PubMed

    Swaminathan, M

    1997-01-01

    Indian women do not have to be told the benefits of breast feeding or "rescued from the clutches of wicked multinational companies" by international agencies. There is no proof that breast feeding has declined in India; in fact, a 1987 survey revealed that 98% of Indian women breast feed. Efforts to promote breast feeding among the middle classes rely on such initiatives as the "baby friendly" hospital where breast feeding is promoted immediately after birth. This ignores the 76% of Indian women who give birth at home. Blaming this unproved decline in breast feeding on multinational companies distracts attention from more far-reaching and intractable effects of social change. While the Infant Milk Substitutes Act is helpful, it also deflects attention from more pressing issues. Another false assumption is that Indian women are abandoning breast feeding to comply with the demands of employment, but research indicates that most women give up employment for breast feeding, despite the economic cost to their families. Women also seek work in the informal sector to secure the flexibility to meet their child care responsibilities. Instead of being concerned about "teaching" women what they already know about the benefits of breast feeding, efforts should be made to remove the constraints women face as a result of their multiple roles and to empower them with the support of families, governmental policies and legislation, employers, health professionals, and the media.

  6. 1 CFR 18.8 - Seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 1 General Provisions 1 2010-01-01 2010-01-01 false Seal. 18.8 Section 18.8 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.8 Seal. Use of a seal on an original document...

  7. 19 CFR 201.0 - Seal.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 3 2013-04-01 2013-04-01 false Seal. 201.0 Section 201.0 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.0 Seal. (a) Pursuant to... Trade Commission has adopted an official seal, the depiction of which follows: EC05OC91.026 (b)...

  8. 19 CFR 201.0 - Seal.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 3 2014-04-01 2014-04-01 false Seal. 201.0 Section 201.0 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.0 Seal. (a) Pursuant to... Trade Commission has adopted an official seal, the depiction of which follows: EC05OC91.026 (b)...

  9. 19 CFR 201.0 - Seal.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 3 2012-04-01 2012-04-01 false Seal. 201.0 Section 201.0 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.0 Seal. (a) Pursuant to... Trade Commission has adopted an official seal, the depiction of which follows: EC05OC91.026 (b)...

  10. 40 CFR 147.3103 - Fluid seals.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Fluid seals. 147.3103 Section 147.3103... Tribes § 147.3103 Fluid seals. Notwithstanding §§ 144.28(f)(2) and 146.12(c) of this chapter, owners and operators shall not use a fluid seal as an alternative to a packer....

  11. 14 CFR 187.7 - Copies; seal.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Copies; seal. 187.7 Section 187.7... REGULATIONS FEES § 187.7 Copies; seal. The fees for furnishing photostatic or similar copies of documents and for affixation of the seal for a certification or validation are the same as those provided in...

  12. 28 CFR 0.146 - Seals.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 28 Judicial Administration 1 2012-07-01 2012-07-01 false Seals. 0.146 Section 0.146 Judicial... Personnel and Certain Administrative Matters § 0.146 Seals. The Director of the Federal Bureau of... the U.S. Marshals Service shall each have custody of the seal pertaining to his...

  13. 29 CFR 4002.11 - Seal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 9 2014-07-01 2014-07-01 false Seal. 4002.11 Section 4002.11 Labor Regulations Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION GENERAL BYLAWS OF THE PENSION BENEFIT GUARANTY CORPORATION § 4002.11 Seal. The seal of the Corporation shall be in such form as may be approved from time...

  14. 40 CFR 147.3103 - Fluid seals.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Fluid seals. 147.3103 Section 147.3103... Tribes § 147.3103 Fluid seals. Notwithstanding §§ 144.28(f)(2) and 146.12(c) of this chapter, owners and operators shall not use a fluid seal as an alternative to a packer....

  15. 19 CFR 201.0 - Seal.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Seal. 201.0 Section 201.0 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.0 Seal. (a) Pursuant to... Trade Commission has adopted an official seal, the depiction of which follows: EC05OC91.026 (b)...

  16. 28 CFR 0.146 - Seals.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 28 Judicial Administration 1 2014-07-01 2014-07-01 false Seals. 0.146 Section 0.146 Judicial... Personnel and Certain Administrative Matters § 0.146 Seals. The Director of the Federal Bureau of... the U.S. Marshals Service shall each have custody of the seal pertaining to his...

  17. 19 CFR 201.0 - Seal.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 3 2011-04-01 2011-04-01 false Seal. 201.0 Section 201.0 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.0 Seal. (a) Pursuant to... Trade Commission has adopted an official seal, the depiction of which follows: EC05OC91.026 (b)...

  18. 29 CFR 4002.11 - Seal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 9 2012-07-01 2012-07-01 false Seal. 4002.11 Section 4002.11 Labor Regulations Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION GENERAL BYLAWS OF THE PENSION BENEFIT GUARANTY CORPORATION § 4002.11 Seal. The seal of the Corporation shall be in such form as may be approved from time...

  19. 14 CFR 187.7 - Copies; seal.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Copies; seal. 187.7 Section 187.7... REGULATIONS FEES § 187.7 Copies; seal. The fees for furnishing photostatic or similar copies of documents and for affixation of the seal for a certification or validation are the same as those provided in...

  20. 14 CFR 187.7 - Copies; seal.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Copies; seal. 187.7 Section 187.7... REGULATIONS FEES § 187.7 Copies; seal. The fees for furnishing photostatic or similar copies of documents and for affixation of the seal for a certification or validation are the same as those provided in...

  1. 29 CFR 4002.11 - Seal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 9 2013-07-01 2013-07-01 false Seal. 4002.11 Section 4002.11 Labor Regulations Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION GENERAL BYLAWS OF THE PENSION BENEFIT GUARANTY CORPORATION § 4002.11 Seal. The seal of the Corporation shall be in such form as may be approved from time...

  2. 1 CFR 18.8 - Seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 1 General Provisions 1 2012-01-01 2012-01-01 false Seal. 18.8 Section 18.8 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.8 Seal. Use of a seal on an original document...

  3. 14 CFR 187.7 - Copies; seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Copies; seal. 187.7 Section 187.7... REGULATIONS FEES § 187.7 Copies; seal. The fees for furnishing photostatic or similar copies of documents and for affixation of the seal for a certification or validation are the same as those provided in...

  4. 1 CFR 18.8 - Seal.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 1 General Provisions 1 2011-01-01 2011-01-01 false Seal. 18.8 Section 18.8 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.8 Seal. Use of a seal on an original document...

  5. 40 CFR 147.3103 - Fluid seals.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Fluid seals. 147.3103 Section 147.3103... Tribes § 147.3103 Fluid seals. Notwithstanding §§ 144.28(f)(2) and 146.12(c) of this chapter, owners and operators shall not use a fluid seal as an alternative to a packer....

  6. 29 CFR 4002.11 - Seal.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Seal. 4002.11 Section 4002.11 Labor Regulations Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION GENERAL BYLAWS OF THE PENSION BENEFIT GUARANTY CORPORATION § 4002.11 Seal. The seal of the Corporation shall be in such form as may be approved from time...

  7. 14 CFR 187.7 - Copies; seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Copies; seal. 187.7 Section 187.7... REGULATIONS FEES § 187.7 Copies; seal. The fees for furnishing photostatic or similar copies of documents and for affixation of the seal for a certification or validation are the same as those provided in...

  8. Seal arrangement

    DOEpatents

    Lundholm, Gunnar

    1987-01-01

    A seal arrangement is provided for preventing gas leakage along a reciprocating piston rod or other reciprocating member passing through a wall which separates a high pressure gas chmber and a low pressure gas chamber. Liquid lubricant is applied to the lower pressure side of a sealing gland surrounding the piston rod to prevent the escape of gas between the rod and the gland. The sealing gland is radially forced against the piston rod by action of a plurality of axially stacked O-rings influenced by an axially acting spring as well as pressure from the gas.

  9. 10 CFR 835.1201 - Sealed radioactive source control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Sealed radioactive source control. 835.1201 Section 835.1201 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Sealed Radioactive Source Control § 835.1201 Sealed radioactive source control. Sealed radioactive sources shall be used, handled,...

  10. 10 CFR 835.1202 - Accountable sealed radioactive sources.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Accountable sealed radioactive sources. 835.1202 Section 835.1202 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Sealed Radioactive Source Control § 835.1202 Accountable sealed radioactive sources. (a) Each accountable sealed radioactive...

  11. 10 CFR 835.1201 - Sealed radioactive source control.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Sealed radioactive source control. 835.1201 Section 835.1201 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Sealed Radioactive Source Control § 835.1201 Sealed radioactive source control. Sealed radioactive sources shall be used, handled,...

  12. 10 CFR 835.1201 - Sealed radioactive source control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Sealed radioactive source control. 835.1201 Section 835.1201 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Sealed Radioactive Source Control § 835.1201 Sealed radioactive source control. Sealed radioactive sources shall be used, handled,...

  13. 10 CFR 835.1201 - Sealed radioactive source control.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Sealed radioactive source control. 835.1201 Section 835.1201 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Sealed Radioactive Source Control § 835.1201 Sealed radioactive source control. Sealed radioactive sources shall be used, handled,...

  14. 10 CFR 835.1201 - Sealed radioactive source control.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Sealed radioactive source control. 835.1201 Section 835.1201 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Sealed Radioactive Source Control § 835.1201 Sealed radioactive source control. Sealed radioactive sources shall be used, handled,...

  15. 10 CFR 835.1202 - Accountable sealed radioactive sources.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Accountable sealed radioactive sources. 835.1202 Section 835.1202 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Sealed Radioactive Source Control § 835.1202 Accountable sealed radioactive sources. (a) Each accountable sealed radioactive...

  16. 10 CFR 835.1202 - Accountable sealed radioactive sources.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Accountable sealed radioactive sources. 835.1202 Section 835.1202 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Sealed Radioactive Source Control § 835.1202 Accountable sealed radioactive sources. (a) Each accountable sealed radioactive...

  17. 48 CFR 14.101 - Elements of sealed bidding.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Elements of sealed bidding. 14.101 Section 14.101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Use of Sealed Bidding 14.101 Elements of sealed...

  18. 48 CFR 14.101 - Elements of sealed bidding.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Elements of sealed bidding. 14.101 Section 14.101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Use of Sealed Bidding 14.101 Elements of sealed...

  19. 48 CFR 14.101 - Elements of sealed bidding.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Elements of sealed bidding. 14.101 Section 14.101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Use of Sealed Bidding 14.101 Elements of sealed...

  20. 48 CFR 14.101 - Elements of sealed bidding.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Elements of sealed bidding. 14.101 Section 14.101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Use of Sealed Bidding 14.101 Elements of sealed...

  1. 48 CFR 14.101 - Elements of sealed bidding.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Elements of sealed bidding. 14.101 Section 14.101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Use of Sealed Bidding 14.101 Elements of sealed...

  2. 49 CFR 803.3 - Authority to affix Seal.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Authority to affix Seal. 803.3 Section 803.3 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD OFFICIAL SEAL § 803.3 Authority to affix Seal. (a) The Seal shall be in the custody and control of...

  3. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 1 2014-07-01 2014-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or...) Requests by any person or organization outside of the Department for permission to use the Seal must...

  4. 28 CFR 803.2 - Authority to affix seal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Authority to affix seal. 803.2 Section... COLUMBIA AGENCY SEAL § 803.2 Authority to affix seal. The Director of CSOSA or PSA (as appropriate) and each Director's designees are authorized to affix their respective Agency seal (including replicas...

  5. 49 CFR 803.3 - Authority to affix Seal.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Authority to affix Seal. 803.3 Section 803.3 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD OFFICIAL SEAL § 803.3 Authority to affix Seal. (a) The Seal shall be in the custody and control of...

  6. 34 CFR 3.3 - Authority to affix seal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 1 2014-07-01 2014-07-01 false Authority to affix seal. 3.3 Section 3.3 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.3 Authority to affix seal. The Secretary and the Secretary's designees are authorized to affix the Official Seal, replicas,...

  7. 49 CFR 803.3 - Authority to affix Seal.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Authority to affix Seal. 803.3 Section 803.3 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD OFFICIAL SEAL § 803.3 Authority to affix Seal. (a) The Seal shall be in the custody and control of...

  8. 4 CFR 202.3 - Prohibitions against misuse of seal.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 4 Accounts 1 2014-01-01 2013-01-01 true Prohibitions against misuse of seal. 202.3 Section 202.3 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.3 Prohibitions against misuse of seal. (a) Falsely making, forging, counterfeiting, mutilating, or altering the Board seal...

  9. 4 CFR 202.2 - Authority to affix seal.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 4 Accounts 1 2013-01-01 2013-01-01 false Authority to affix seal. 202.2 Section 202.2 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.2 Authority to affix seal. (a) The following officials of the Board are authorized to affix the official seal (including reproductions)...

  10. 28 CFR 803.2 - Authority to affix seal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Authority to affix seal. 803.2 Section... COLUMBIA AGENCY SEAL § 803.2 Authority to affix seal. The Director of CSOSA or PSA (as appropriate) and the Director's designees are authorized to affix the Agency seal (including replicas and reproductions)...

  11. 4 CFR 202.2 - Authority to affix seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 4 Accounts 1 2012-01-01 2012-01-01 false Authority to affix seal. 202.2 Section 202.2 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.2 Authority to affix seal. (a) The following officials of the Board are authorized to affix the official seal (including reproductions)...

  12. 28 CFR 803.2 - Authority to affix seal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Authority to affix seal. 803.2 Section... COLUMBIA AGENCY SEAL § 803.2 Authority to affix seal. The Director of CSOSA or PSA (as appropriate) and each Director's designees are authorized to affix their respective Agency seal (including replicas...

  13. 49 CFR 803.3 - Authority to affix Seal.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Authority to affix Seal. 803.3 Section 803.3 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD OFFICIAL SEAL § 803.3 Authority to affix Seal. (a) The Seal shall be in the custody and control of...

  14. 4 CFR 202.2 - Authority to affix seal.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 4 Accounts 1 2011-01-01 2011-01-01 false Authority to affix seal. 202.2 Section 202.2 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.2 Authority to affix seal. (a) The following officials of the Board are authorized to affix the official seal (including reproductions)...

  15. 49 CFR 803.3 - Authority to affix Seal.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Authority to affix Seal. 803.3 Section 803.3 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD OFFICIAL SEAL § 803.3 Authority to affix Seal. (a) The Seal shall be in the custody and control of...

  16. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 1 2013-07-01 2013-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or...) Requests by any person or organization outside of the Department for permission to use the Seal must...

  17. 34 CFR 3.3 - Authority to affix seal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 1 2013-07-01 2013-07-01 false Authority to affix seal. 3.3 Section 3.3 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.3 Authority to affix seal. The Secretary and the Secretary's designees are authorized to affix the Official Seal, replicas,...

  18. 4 CFR 202.2 - Authority to affix seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 4 Accounts 1 2010-01-01 2010-01-01 false Authority to affix seal. 202.2 Section 202.2 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.2 Authority to affix seal. (a) The following officials of the Board are authorized to affix the official seal (including reproductions)...

  19. 34 CFR 3.3 - Authority to affix seal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 1 2012-07-01 2012-07-01 false Authority to affix seal. 3.3 Section 3.3 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.3 Authority to affix seal. The Secretary and the Secretary's designees are authorized to affix the Official Seal, replicas,...

  20. 21 CFR 864.9750 - Heat-sealing device.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Heat-sealing device. 864.9750 Section 864.9750... and Blood Products § 864.9750 Heat-sealing device. (a) Identification. A heat-sealing device is a device intended for medical purposes that uses heat to seal plastic bags containing blood or...

  1. 21 CFR 864.9750 - Heat-sealing device.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Heat-sealing device. 864.9750 Section 864.9750... and Blood Products § 864.9750 Heat-sealing device. (a) Identification. A heat-sealing device is a device intended for medical purposes that uses heat to seal plastic bags containing blood or...

  2. 19 CFR 122.132 - Sealing of aircraft liquor kits.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Sealing of aircraft liquor kits. 122.132 Section... OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.132 Sealing of aircraft liquor kits. (a) Sealing required. Aircraft liquor kits shall be sealed on board the aircraft by...

  3. 19 CFR 122.132 - Sealing of aircraft liquor kits.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Sealing of aircraft liquor kits. 122.132 Section... OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.132 Sealing of aircraft liquor kits. (a) Sealing required. Aircraft liquor kits shall be sealed on board the aircraft by...

  4. 19 CFR 122.132 - Sealing of aircraft liquor kits.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Sealing of aircraft liquor kits. 122.132 Section... OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.132 Sealing of aircraft liquor kits. (a) Sealing required. Aircraft liquor kits shall be sealed on board the aircraft by...

  5. 19 CFR 122.132 - Sealing of aircraft liquor kits.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Sealing of aircraft liquor kits. 122.132 Section... OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.132 Sealing of aircraft liquor kits. (a) Sealing required. Aircraft liquor kits shall be sealed on board the aircraft by...

  6. 49 CFR 803.5 - Use of the Seal.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Use of the Seal. 803.5 Section 803.5... OFFICIAL SEAL § 803.5 Use of the Seal. (a) The Seal is the official emblem of the Board and its use is... organization outside of the Board for permission to use the Seal must be made in writing to Director, Bureau...

  7. 28 CFR 803.3 - Use of the seal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Use of the seal. 803.3 Section 803.3... SEAL § 803.3 Use of the seal. (a) Each Agency's seal is used by that Agency's staff for official Agency....3. (b) Use of the Agency seal by any person or organization outside of the Agency may be made...

  8. 28 CFR 803.3 - Use of the seal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Use of the seal. 803.3 Section 803.3... SEAL § 803.3 Use of the seal. (a) Each Agency's seal is used by that Agency's staff for official Agency....3. (b) Use of the Agency seal by any person or organization outside of the Agency may be made...

  9. 49 CFR 803.5 - Use of the Seal.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Use of the Seal. 803.5 Section 803.5... OFFICIAL SEAL § 803.5 Use of the Seal. (a) The Seal is the official emblem of the Board and its use is... organization outside of the Board for permission to use the Seal must be made in writing to Director, Bureau...

  10. 49 CFR 803.5 - Use of the Seal.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Use of the Seal. 803.5 Section 803.5... OFFICIAL SEAL § 803.5 Use of the Seal. (a) The Seal is the official emblem of the Board and its use is... organization outside of the Board for permission to use the Seal must be made in writing to Director, Bureau...

  11. 49 CFR 803.5 - Use of the Seal.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Use of the Seal. 803.5 Section 803.5... OFFICIAL SEAL § 803.5 Use of the Seal. (a) The Seal is the official emblem of the Board and its use is... organization outside of the Board for permission to use the Seal must be made in writing to Director, Bureau...

  12. 49 CFR 803.5 - Use of the Seal.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Use of the Seal. 803.5 Section 803.5... OFFICIAL SEAL § 803.5 Use of the Seal. (a) The Seal is the official emblem of the Board and its use is... organization outside of the Board for permission to use the Seal must be made in writing to Director, Bureau...

  13. Forming a seal between planar sealing surfaces

    SciTech Connect

    Ezekoye, L.I.; Rusnica, E.J.; Sepp, H.A. Jr.

    1987-12-29

    A method of forming a seal between the confronting planar sealing surfaces on two annular structural members which are drawn together by axially extending bolts is described comprising the steps of: forming a seal assembly by locking a toroidal, crushable seal member within a substantially flat annular spacer member against an annular shoulder formed on the inner diameter thereof with an annular resilient member seated in a radially extending groove in the inner surface of the substantially flat annular member, the flat annular member being axially thinner than the toroidal, crushable seal member; placing the sealing assembly between the planar sealing surfaces and positively aligning the assembly relative to the axially extending bolts; and tightening the bolts to draw the planar sealing surfaces toward each other and into contact with the flat annular member while crushing the toroidal, crushable seal member to form a seal between the planar sealing surfaces.

  14. Python fiber optic seal

    SciTech Connect

    Ystesund, K.; Bartberger, J.; Brusseau, C.; Fleming, P.; Insch, K.; Tolk, K.

    1993-08-01

    Sandia National Laboratories has developed a high security fiber optic seal that incorporates tamper resistance features that are not available in commercial fiber optic seals. The Python Seal is a passive fiber optic loop seal designed to give indication of unauthorized entry. The seal includes a fingerprint feature that provides seal identity information in addition to the unique fiber optic pattern created when the seal is installed. The fiber optic cable used for the seal loop is produced with tamper resistant features that increase the difficulty of attacking that component of a seal. A Seal Reader has been developed that will record the seal signature and the fingerprint feature of the seal. A Correlator software program then compares seal images to establish a match or mismatch. SNL is also developing a Polaroid reader to permit hard copies of the seal patterns to be obtained directly from the seal.

  15. 40 CFR Table 26 to Subpart G of... - Seal Related Factors for Internal Floating Roof Vessels

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 10 2014-07-01 2014-07-01 false Seal Related Factors for Internal..., and Wastewater Pt. 63, Subpt. G, Table 26 Table 26 to Subpart G of Part 63—Seal Related Factors for Internal Floating Roof Vessels Seal type KS n Liquid mounted resilient seal: Primary seal only 3.0 0...

  16. 40 CFR Table 26 to Subpart G of... - Seal Related Factors for Internal Floating Roof Vessels

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 10 2012-07-01 2012-07-01 false Seal Related Factors for Internal..., and Wastewater Pt. 63, Subpt. G, Table 26 Table 26 to Subpart G of Part 63—Seal Related Factors for Internal Floating Roof Vessels Seal type KS n Liquid mounted resilient seal: Primary seal only 3.0 0...

  17. 36 CFR 1200.2 - How is each NARA seal designed?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false How is each NARA seal... ADMINISTRATION GENERAL RULES OFFICIAL SEALS How are NARA's Official Seals and Logos Designed and Used? § 1200.2 How is each NARA seal designed? NARA's three official seals are illustrated in Figures 1, 2, and 30....

  18. 36 CFR 1200.2 - How is each NARA seal designed?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false How is each NARA seal... ADMINISTRATION GENERAL RULES OFFICIAL SEALS How are NARA's Official Seals and Logos Designed and Used? § 1200.2 How is each NARA seal designed? NARA's three official seals are illustrated in Figures 1, 2, and 30....

  19. 40 CFR Table 26 to Subpart G of... - Seal Related Factors for Internal Floating Roof Vessels

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 10 2013-07-01 2013-07-01 false Seal Related Factors for Internal..., and Wastewater Pt. 63, Subpt. G, Table 26 Table 26 to Subpart G of Part 63—Seal Related Factors for Internal Floating Roof Vessels Seal type KS n Liquid mounted resilient seal: Primary seal only 3.0 0...

  20. 30 CFR 75.335 - Seal strengths, design applications, and installation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or... address the potential hazards. The plan shall include seal strengths sufficient to address such...

  1. GAS SEAL

    DOEpatents

    Monson, H.; Hutter, E.

    1961-07-11

    A seal is described for a cover closing an opening in the top of a pressure vessel that may house a nuclear reactor. The seal comprises a U-shaped trough formed on the pressure vessel around the opening therein, a mass of metal in the trough, and an edge flange on the cover extending loosely into the trough and dipping into the metal mass. The lower portion of the metal mass is kept melted, and the upper portion, solid. The solid pontion of the metal mass prevents pressure surges in the vessel from expelling the liquid portion of the metal mass from the trough; the liquld portion, thus held in place by the solid portion, does not allow gas to go through, and so gas cannot escape through shrinkage holes in the solid portion.

  2. Fluid pressure balanced seal

    NASA Technical Reports Server (NTRS)

    Marsh, H. W. (Inventor)

    1966-01-01

    A seal which increases in effectiveness with increasing pressure is presented. The seal's functional capability throughout both static and dynamic operation makes it particularly useful for sealing ball valve ports. Other features of the seal include the ability to seal two opposed surfaces simultaneously, tolerance of small misalignments, tolerance of wide temperature ranges, ability to maintain positive sealing contact under conditions of internal or external pressurization, and ability to conform to slight irregularities in seal or surface contours.

  3. Turbine with radial acting seal

    SciTech Connect

    Eng, Darryl S; Ebert, Todd A

    2016-11-22

    A floating brush seal in a rim cavity of a turbine in a gas turbine engine, where the floating brush seal includes a seal holder in which the floating brush seal floats, and a expandable seal that fits within two radial extending seal slots that maintains a seal with radial displacement of the floating brush seal and the seal holder.

  4. Dynamic Face Seal Arrangement

    NASA Technical Reports Server (NTRS)

    Dellacorte, Christopher (Inventor)

    1999-01-01

    A radial face seal arrangement is disclosed comprising a stationary seal ring that is spring loaded against a seal seat affixed to a rotating shaft. The radial face seal arrangement further comprises an arrangement that not only allows for preloading of the stationary seal ring relative to the seal seat, but also provides for dampening yielding a dynamic seating response for the radial face seal arrangement. The overall seal system, especially regarding the selection of the material for the stationary seal ring, is designed to operate over a wide temperature range from below ambient up to 900 C.

  5. Regenerator seal design

    DOEpatents

    Eckart, Francis H.

    1982-01-01

    A rotary regenerator disc matrix has a face seal with a cross arm and arcuate rim segments joined by prestress clamps to prestrain the arcuate rim seals so as to compensate seal rim twisting or coning and resultant disc face seal leakage as produced by operating thermal gradients across the seal.

  6. Sealing arrangement

    SciTech Connect

    Brandenstein, M.; Hans, R.; Kiener, H.

    1985-04-09

    An hydraulically operated clutch release has an annular piston hydraulically moveable in an annular chamber. A felt ring is mounted on a shoulder of the piston away from the chamber, to engage the bore surface of the chamber, and a holding ring is snapped onto the end of the shoulder to hold the felt ring on the shoulder. An extension of the holding ring forms a seal with the bore on the chamber, and defines, with the felt ring a dust catching recesS.

  7. 40 CFR 147.3103 - Fluid seals.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Fluid seals. 147.3103 Section 147.3103 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE... Tribes § 147.3103 Fluid seals. Notwithstanding §§ 144.28(f)(2) and 146.12(c) of this chapter, owners...

  8. 19 CFR 101.7 - Customs seal.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Customs seal. 101.7 Section 101.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY GENERAL PROVISIONS § 101.7 Customs seal. (a) Design. According to the design furnished by the...

  9. Regenerator seal

    DOEpatents

    Davis, Leonard C.; Pacala, Theodore; Sippel, George R.

    1981-01-01

    A method for manufacturing a hot side regenerator cross arm seal assembly having a thermally stablilized wear coating with a substantially flat wear surface thereon to seal between low pressure and high pressure passages to and from the hot inboard side of a rotary regenerator matrix includes the steps of forming a flat cross arm substrate member of high nickel alloy steel; fixedly securing the side edges of the substrate member to a holding fixture with a concave surface thereacross to maintain the substrate member to a slightly bent configuration on the fixture surface between the opposite ends of the substrate member to produce prestress therein; applying coating layers on the substrate member including a wear coating of plasma sprayed nickel oxide/calcium flouride material to define a wear surface of slightly concave form across the restrained substrate member between the free ends thereon; and thereafter subjecting the substrate member and the coating thereon to a heat treatment of 1600.degree. F. for sixteen hours to produce heat stabilizing growth in the coating layers on the substrate member and to produce a thermally induced growth stress in the wear surface that substantially equalizes the prestress in the substrate whereby when the cross arm is removed from the fixture surface following the heat treatment step a wear face is formed on the cross arm assembly that will be substantially flat between the ends.

  10. Damper Spring For Omega Seal

    NASA Technical Reports Server (NTRS)

    Maclaughlin, Scott T.; Montgomery, Stuart K.

    1993-01-01

    Damper spring reduces deflections of omega-cross-section seal, reducing probability of failure and extending life of seal. Spring is split ring with U-shaped cross section. Placed inside omega seal and inserted with seal into seal cavity. As omega seal compressed into cavity, spring and seal make contact near convolution of seal, and spring becomes compressed also. During operation, when seal dynamically loaded, spring limits deflection of seal, reducing stress on seal.

  11. Triple acting radial seal

    SciTech Connect

    Ebert, Todd A; Carella, John A

    2012-03-13

    A triple acting radial seal used as an interstage seal assembly in a gas turbine engine, where the seal assembly includes an interstage seal support extending from a stationary inner shroud of a vane ring, the interstage seal support includes a larger annular radial inward facing groove in which an outer annular floating seal assembly is secured for radial displacement, and the outer annular floating seal assembly includes a smaller annular radial inward facing groove in which an inner annular floating seal assembly is secured also for radial displacement. A compliant seal is secured to the inner annular floating seal assembly. The outer annular floating seal assembly encapsulates the inner annular floating seal assembly which is made from a very low alpha material in order to reduce thermal stress.

  12. Fundamentals of fluid sealing

    NASA Technical Reports Server (NTRS)

    Zuk, J.

    1976-01-01

    The fundamentals of fluid sealing, including seal operating regimes, are discussed and the general fluid-flow equations for fluid sealing are developed. Seal performance parameters such as leakage and power loss are presented. Included in the discussion are the effects of geometry, surface deformations, rotation, and both laminar and turbulent flows. The concept of pressure balancing is presented, as are differences between liquid and gas sealing. Mechanisms of seal surface separation, fundamental friction and wear concepts applicable to seals, seal materials, and pressure-velocity (PV) criteria are discussed.

  13. 21 CFR 892.1400 - Nuclear sealed calibration source.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Nuclear sealed calibration source. 892.1400... (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1400 Nuclear sealed calibration source. (a) Identification. A nuclear sealed calibration source is a device that consists of an...

  14. 17 CFR 2.2 - Authority to affix seal.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 17 Commodity and Securities Exchanges 1 2014-04-01 2014-04-01 false Authority to affix seal. 2.2 Section 2.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFFICIAL SEAL § 2.2 Authority to affix seal. (a) The following officials of the Commodity Futures Trading Commission...

  15. 17 CFR 2.2 - Authority to affix seal.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 17 Commodity and Securities Exchanges 1 2012-04-01 2012-04-01 false Authority to affix seal. 2.2 Section 2.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFFICIAL SEAL § 2.2 Authority to affix seal. (a) The following officials of the Commodity Futures Trading Commission...

  16. 17 CFR 2.2 - Authority to affix seal.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 1 2013-04-01 2013-04-01 false Authority to affix seal. 2.2 Section 2.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFFICIAL SEAL § 2.2 Authority to affix seal. (a) The following officials of the Commodity Futures Trading Commission...

  17. 21 CFR 892.1400 - Nuclear sealed calibration source.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Nuclear sealed calibration source. 892.1400... (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1400 Nuclear sealed calibration source. (a) Identification. A nuclear sealed calibration source is a device that consists of an...

  18. 21 CFR 892.1400 - Nuclear sealed calibration source.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Nuclear sealed calibration source. 892.1400... (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1400 Nuclear sealed calibration source. (a) Identification. A nuclear sealed calibration source is a device that consists of an...

  19. 21 CFR 892.1400 - Nuclear sealed calibration source.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Nuclear sealed calibration source. 892.1400... (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1400 Nuclear sealed calibration source. (a) Identification. A nuclear sealed calibration source is a device that consists of an...

  20. 21 CFR 892.1400 - Nuclear sealed calibration source.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Nuclear sealed calibration source. 892.1400... (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1400 Nuclear sealed calibration source. (a) Identification. A nuclear sealed calibration source is a device that consists of an...

  1. 17 CFR 2.2 - Authority to affix seal.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Authority to affix seal. 2.2 Section 2.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFFICIAL SEAL § 2.2 Authority to affix seal. (a) The following officials of the Commodity Futures Trading Commission...

  2. 17 CFR 2.2 - Authority to affix seal.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Authority to affix seal. 2.2 Section 2.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFFICIAL SEAL § 2.2 Authority to affix seal. (a) The following officials of the Commodity Futures Trading Commission...

  3. 46 CFR 176.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Breaking of safety valve seals. 176.704 Section 176.704... TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.704 Breaking of safety valve seals... the seal on a boiler safety valve on a vessel is broken....

  4. 46 CFR 59.10-30 - Seal welding.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Seal welding. 59.10-30 Section 59.10-30 Shipping COAST... VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service § 59.10-30 Seal... determine the cause. Such leaks may be made tight by seal welding the edge, if, in the opinion of...

  5. 46 CFR 59.10-30 - Seal welding.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Seal welding. 59.10-30 Section 59.10-30 Shipping COAST... VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service § 59.10-30 Seal... determine the cause. Such leaks may be made tight by seal welding the edge, if, in the opinion of...

  6. 46 CFR 176.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Breaking of safety valve seals. 176.704 Section 176.704... TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.704 Breaking of safety valve seals... the seal on a boiler safety valve on a vessel is broken....

  7. 49 CFR 236.553 - Seal, where required.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Seal, where required. 236.553 Section 236.553..., Train Control and Cab Signal Systems Rules and Instructions; Locomotives § 236.553 Seal, where required. Seal shall be maintained on any device other than brake-pipe cut-out cock (double-heading cock),...

  8. 12 CFR 1700.3 - Official logo and seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 9 2012-01-01 2012-01-01 false Official logo and seal. 1700.3 Section 1700.3... DEVELOPMENT OFHEO ORGANIZATION AND FUNCTIONS ORGANIZATION AND FUNCTIONS § 1700.3 Official logo and seal. The..., and signage. The logo serves as the official seal to authenticate official documents of the Agency....

  9. 46 CFR 115.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Breaking of safety valve seals. 115.704 Section 115.704... CERTIFICATION Repairs and Alterations § 115.704 Breaking of safety valve seals. The owner, managing operator, or master shall notify the cognizant OCMI as soon as practicable after the seal on a boiler safety valve...

  10. 49 CFR 236.553 - Seal, where required.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Seal, where required. 236.553 Section 236.553..., Train Control and Cab Signal Systems Rules and Instructions; Locomotives § 236.553 Seal, where required. Seal shall be maintained on any device other than brake-pipe cut-out cock (double-heading cock),...

  11. 12 CFR 1200.3 - Official logo and seal.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 10 2014-01-01 2014-01-01 false Official logo and seal. 1200.3 Section 1200.3... § 1200.3 Official logo and seal. This section describes and displays the logo adopted by the Director as... signage. The logo serves as the official seal to certify and authenticate official documents of the...

  12. 46 CFR 59.10-30 - Seal welding.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Seal welding. 59.10-30 Section 59.10-30 Shipping COAST... VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service § 59.10-30 Seal... determine the cause. Such leaks may be made tight by seal welding the edge, if, in the opinion of...

  13. 49 CFR 236.553 - Seal, where required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Seal, where required. 236.553 Section 236.553..., Train Control and Cab Signal Systems Rules and Instructions; Locomotives § 236.553 Seal, where required. Seal shall be maintained on any device other than brake-pipe cut-out cock (double-heading cock),...

  14. 46 CFR 115.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Breaking of safety valve seals. 115.704 Section 115.704... CERTIFICATION Repairs and Alterations § 115.704 Breaking of safety valve seals. The owner, managing operator, or master shall notify the cognizant OCMI as soon as practicable after the seal on a boiler safety valve...

  15. 46 CFR 176.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Breaking of safety valve seals. 176.704 Section 176.704... TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.704 Breaking of safety valve seals... the seal on a boiler safety valve on a vessel is broken....

  16. 12 CFR 1200.3 - Official logo and seal.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 9 2013-01-01 2013-01-01 false Official logo and seal. 1200.3 Section 1200.3... § 1200.3 Official logo and seal. This section describes and displays the logo adopted by the Director as... signage. The logo serves as the official seal to certify and authenticate official documents of the...

  17. 46 CFR 59.10-30 - Seal welding.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Seal welding. 59.10-30 Section 59.10-30 Shipping COAST... VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service § 59.10-30 Seal... determine the cause. Such leaks may be made tight by seal welding the edge, if, in the opinion of...

  18. 49 CFR 236.553 - Seal, where required.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Seal, where required. 236.553 Section 236.553..., Train Control and Cab Signal Systems Rules and Instructions; Locomotives § 236.553 Seal, where required. Seal shall be maintained on any device other than brake-pipe cut-out cock (double-heading cock),...

  19. 46 CFR 115.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Breaking of safety valve seals. 115.704 Section 115.704... CERTIFICATION Repairs and Alterations § 115.704 Breaking of safety valve seals. The owner, managing operator, or master shall notify the cognizant OCMI as soon as practicable after the seal on a boiler safety valve...

  20. 46 CFR 115.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Breaking of safety valve seals. 115.704 Section 115.704... CERTIFICATION Repairs and Alterations § 115.704 Breaking of safety valve seals. The owner, managing operator, or master shall notify the cognizant OCMI as soon as practicable after the seal on a boiler safety valve...

  1. 46 CFR 176.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Breaking of safety valve seals. 176.704 Section 176.704... TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.704 Breaking of safety valve seals... the seal on a boiler safety valve on a vessel is broken....

  2. 12 CFR 905.26 - Official logo and seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Official logo and seal. 905.26 Section 905.26... OPERATIONS DESCRIPTION OF ORGANIZATION AND FUNCTIONS Miscellaneous § 905.26 Official logo and seal. This... as the official seal used to certify and authenticate official documents of the Board of...

  3. 46 CFR 115.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Breaking of safety valve seals. 115.704 Section 115.704... CERTIFICATION Repairs and Alterations § 115.704 Breaking of safety valve seals. The owner, managing operator, or master shall notify the cognizant OCMI as soon as practicable after the seal on a boiler safety valve...

  4. 49 CFR 236.553 - Seal, where required.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Seal, where required. 236.553 Section 236.553..., Train Control and Cab Signal Systems Rules and Instructions; Locomotives § 236.553 Seal, where required. Seal shall be maintained on any device other than brake-pipe cut-out cock (double-heading cock),...

  5. 46 CFR 176.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Breaking of safety valve seals. 176.704 Section 176.704... TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.704 Breaking of safety valve seals... the seal on a boiler safety valve on a vessel is broken....

  6. 50 CFR 216.71 - Allowable take of fur seals.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 10 2014-10-01 2014-10-01 false Allowable take of fur seals. 216.71... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.71 Allowable take of fur seals. Pribilovians may take fur seals on the Pribilof Islands if such taking is (a) For subsistence uses, and (b)...

  7. 50 CFR 216.81 - Visits to fur seal rookeries.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Visits to fur seal rookeries. 216.81... MAMMALS Pribilof Islands Administration § 216.81 Visits to fur seal rookeries. From June 1 to October 15... any fur seal rookery or hauling grounds nor pass beyond any posted sign forbidding passage....

  8. 50 CFR 216.81 - Visits to fur seal rookeries.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 10 2014-10-01 2014-10-01 false Visits to fur seal rookeries. 216.81... MAMMALS Pribilof Islands Administration § 216.81 Visits to fur seal rookeries. From June 1 to October 15... any fur seal rookery or hauling grounds nor pass beyond any posted sign forbidding passage....

  9. 50 CFR 216.73 - Disposition of fur seal parts.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 10 2014-10-01 2014-10-01 false Disposition of fur seal parts. 216.73... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.73 Disposition of fur seal parts. Except... part of a fur seal taken for subsistence uses may be sold or otherwise transferred to any person...

  10. 50 CFR 216.71 - Allowable take of fur seals.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 10 2012-10-01 2012-10-01 false Allowable take of fur seals. 216.71... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.71 Allowable take of fur seals. Pribilovians may take fur seals on the Pribilof Islands if such taking is (a) For subsistence uses, and (b)...

  11. 50 CFR 216.73 - Disposition of fur seal parts.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Disposition of fur seal parts. 216.73... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.73 Disposition of fur seal parts. Except... part of a fur seal taken for subsistence uses may be sold or otherwise transferred to any person...

  12. 50 CFR 216.71 - Allowable take of fur seals.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 10 2013-10-01 2013-10-01 false Allowable take of fur seals. 216.71... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.71 Allowable take of fur seals. Pribilovians may take fur seals on the Pribilof Islands if such taking is (a) For subsistence uses, and (b)...

  13. 50 CFR 216.73 - Disposition of fur seal parts.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Disposition of fur seal parts. 216.73... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.73 Disposition of fur seal parts. Except... part of a fur seal taken for subsistence uses may be sold or otherwise transferred to any person...

  14. 50 CFR 216.71 - Allowable take of fur seals.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Allowable take of fur seals. 216.71... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.71 Allowable take of fur seals. Pribilovians may take fur seals on the Pribilof Islands if such taking is (a) For subsistence uses, and (b)...

  15. 50 CFR 216.81 - Visits to fur seal rookeries.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Visits to fur seal rookeries. 216.81... MAMMALS Pribilof Islands Administration § 216.81 Visits to fur seal rookeries. From June 1 to October 15... any fur seal rookery or hauling grounds nor pass beyond any posted sign forbidding passage....

  16. 50 CFR 216.73 - Disposition of fur seal parts.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 10 2012-10-01 2012-10-01 false Disposition of fur seal parts. 216.73... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.73 Disposition of fur seal parts. Except... part of a fur seal taken for subsistence uses may be sold or otherwise transferred to any person...

  17. 50 CFR 216.81 - Visits to fur seal rookeries.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 10 2013-10-01 2013-10-01 false Visits to fur seal rookeries. 216.81... MAMMALS Pribilof Islands Administration § 216.81 Visits to fur seal rookeries. From June 1 to October 15... any fur seal rookery or hauling grounds nor pass beyond any posted sign forbidding passage....

  18. 50 CFR 216.71 - Allowable take of fur seals.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Allowable take of fur seals. 216.71... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.71 Allowable take of fur seals. Pribilovians may take fur seals on the Pribilof Islands if such taking is (a) For subsistence uses, and (b)...

  19. 50 CFR 216.73 - Disposition of fur seal parts.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 10 2013-10-01 2013-10-01 false Disposition of fur seal parts. 216.73... MAMMALS Pribilof Islands, Taking for Subsistence Purposes § 216.73 Disposition of fur seal parts. Except... part of a fur seal taken for subsistence uses may be sold or otherwise transferred to any person...

  20. 50 CFR 216.81 - Visits to fur seal rookeries.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 10 2012-10-01 2012-10-01 false Visits to fur seal rookeries. 216.81... MAMMALS Pribilof Islands Administration § 216.81 Visits to fur seal rookeries. From June 1 to October 15... any fur seal rookery or hauling grounds nor pass beyond any posted sign forbidding passage....

  1. 10 CFR 39.35 - Leak testing of sealed sources.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Leak testing of sealed sources. 39.35 Section 39.35 Energy....35 Leak testing of sealed sources. (a) Testing and recordkeeping requirements. Each licensee who uses... Commission for 3 years after the leak test is performed. (b) Method of testing. The wipe of a sealed...

  2. 10 CFR 39.35 - Leak testing of sealed sources.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Leak testing of sealed sources. 39.35 Section 39.35 Energy....35 Leak testing of sealed sources. (a) Testing and recordkeeping requirements. Each licensee who uses... Commission for 3 years after the leak test is performed. (b) Method of testing. The wipe of a sealed...

  3. 10 CFR 36.21 - Performance criteria for sealed sources.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Performance criteria for sealed sources. 36.21 Section 36.21 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR IRRADIATORS Design and Performance Requirements for Irradiators § 36.21 Performance criteria for sealed sources. (a) Requirements. Sealed sources installed...

  4. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 1 2012-07-01 2012-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or organization outside of the Department may be made only with the Department's prior written approval....

  5. 10 CFR 835.1202 - Accountable sealed radioactive sources.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Accountable sealed radioactive sources. 835.1202 Section 835.1202 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Sealed Radioactive Source... human entry or otherwise inaccessible. (e) An accountable sealed radioactive source found to be...

  6. 10 CFR 835.1202 - Accountable sealed radioactive sources.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Accountable sealed radioactive sources. 835.1202 Section 835.1202 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Sealed Radioactive Source... human entry or otherwise inaccessible. (e) An accountable sealed radioactive source found to be...

  7. 14 CFR 1221.109 - Use of the NASA Seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Use of the NASA Seal. 1221.109 Section 1221.109 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION THE NASA SEAL AND OTHER DEVICES, AND THE CONGRESSIONAL SPACE MEDAL OF HONOR NASA Seal, NASA Insignia, NASA Logotype, NASA...

  8. 14 CFR 1221.109 - Use of the NASA Seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Use of the NASA Seal. 1221.109 Section 1221.109 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION THE NASA SEAL AND OTHER DEVICES, AND THE CONGRESSIONAL SPACE MEDAL OF HONOR NASA Seal, NASA Insignia, NASA Logotype, NASA...

  9. 14 CFR 1221.102 - Establishment of the NASA Seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Establishment of the NASA Seal. 1221.102 Section 1221.102 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION THE NASA SEAL AND OTHER DEVICES, AND THE CONGRESSIONAL SPACE MEDAL OF HONOR NASA Seal, NASA Insignia, NASA Logotype,...

  10. 14 CFR 1221.102 - Establishment of the NASA Seal.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Establishment of the NASA Seal. 1221.102 Section 1221.102 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION THE NASA SEAL AND OTHER DEVICES, AND THE CONGRESSIONAL SPACE MEDAL OF HONOR NASA Seal, NASA Insignia, NASA Logotype,...

  11. 14 CFR 1221.109 - Use of the NASA Seal.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Use of the NASA Seal. 1221.109 Section 1221.109 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION THE NASA SEAL AND OTHER DEVICES, AND THE CONGRESSIONAL SPACE MEDAL OF HONOR NASA Seal, NASA Insignia, NASA Logotype, NASA...

  12. 14 CFR 1221.102 - Establishment of the NASA Seal.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Establishment of the NASA Seal. 1221.102 Section 1221.102 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION THE NASA SEAL AND OTHER DEVICES, AND THE CONGRESSIONAL SPACE MEDAL OF HONOR NASA Seal, NASA Insignia, NASA Logotype,...

  13. 40 CFR 141.718 - Treatment performance toolbox components.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Enhanced Treatment for... performance. The State may approve Cryptosporidium treatment credit for drinking water treatment processes... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Treatment performance...

  14. 30 CFR 250.509 - Well-completion structures on fixed platforms.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Well-completion structures on fixed platforms. 250.509 Section 250.509 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND... stresses to the platform....

  15. 40 CFR 246.201 - Residential materials recovery.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Residential materials recovery. 246... SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures § 246.201 Residential materials recovery....

  16. 40 CFR 246.202 - Corrugated container recovery.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Corrugated container recovery. 246.202... SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures § 246.202 Corrugated container recovery....

  17. 40 CFR 246.200 - High-grade paper recovery.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false High-grade paper recovery. 246.200... SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures § 246.200 High-grade paper recovery....

  18. 40 CFR 49.10284 - Source surveillance. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Source surveillance. 49.10284 Section 49.10284 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL... Source surveillance....

  19. 40 CFR 49.9984 - Source surveillance. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Source surveillance. 49.9984 Section 49.9984 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... Source surveillance....

  20. 40 CFR 49.10704 - Source surveillance. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Source surveillance. 49.10704 Section 49.10704 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL... Source surveillance....

  1. 40 CFR 49.10494 - Source surveillance. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Source surveillance. 49.10494 Section 49.10494 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL... Source surveillance....

  2. 40 CFR 49.10674 - Source surveillance. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Source surveillance. 49.10674 Section 49.10674 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL... Source surveillance....

  3. 30 CFR 57.14160 - Mantrip trolley wire hazards underground.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Mantrip trolley wire hazards underground. 57... wire hazards underground. Mantrips shall be covered if there is danger of persons contacting the trolley wire....

  4. 32 CFR 635.30 - Establishing domestic violence Memoranda of Understanding.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 4 2011-07-01 2011-07-01 false Establishing domestic violence Memoranda of... Establishing domestic violence Memoranda of Understanding. (a) Coordination between military law enforcement..., especially concerning domestic violence investigations, arrests, and prosecutions involving...

  5. 40 CFR 149.1 - Purpose.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... of the Safe Drinking Water Act (SDWA). ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Purpose. 149.1 Section 149.1 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) SOLE...

  6. 40 CFR 147.1152 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.1152 Section 147.1152 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  7. 40 CFR 147.2852 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.2852 Section 147.2852 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Pacific Islands § 147.2852 Aquifer exemptions....

  8. 40 CFR 147.1402 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.1402 Section 147.1402 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  9. 40 CFR 147.2152 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.2152 Section 147.2152 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  10. 40 CFR 147.452 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.452 Section 147.452 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... § 147.452 Aquifer exemptions....

  11. 40 CFR 147.2352 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.2352 Section 147.2352 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  12. 40 CFR 147.902 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.902 Section 147.902 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  13. 40 CFR 147.652 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.652 Section 147.652 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  14. 40 CFR 147.752 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.752 Section 147.752 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  15. 40 CFR 147.2752 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.2752 Section 147.2752 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS....2752 Aquifer exemptions....

  16. 40 CFR 147.252 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.252 Section 147.252 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  17. 40 CFR 147.1302 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.1302 Section 147.1302 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  18. 40 CFR 147.1452 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.1452 Section 147.1452 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  19. 40 CFR 147.152 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.152 Section 147.152 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  20. 40 CFR 147.1202 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.1202 Section 147.1202 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  1. 40 CFR 147.502 - Aquifer exemptions. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aquifer exemptions. 147.502 Section 147.502 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... Aquifer exemptions....

  2. 33 CFR 55.1 - Purpose.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Purpose. 55.1 Section 55.1 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PERSONNEL CHILD DEVELOPMENT... Child Development Services....

  3. 40 CFR 721.10126 - Alkyl amino substituted triazine amino substituted benezenesulfonic acid reaction product with...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... substituted triazine amino substituted benezenesulfonic acid reaction product with naphthalenesulfonato azo... substituted triazine amino substituted benezenesulfonic acid reaction product with naphthalenesulfonato azo... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl amino substituted triazine...

  4. 40 CFR 721.10039 - Diethoxybenzenamine derivative, diazotized, coupled with aminonaphthalenesulfonic acid derivative...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Diethoxybenzenamine derivative, diazotized, coupled with aminonaphthalenesulfonic acid derivative, ammonium salt (generic). 721.10039 Section... Substances § 721.10039 Diethoxybenzenamine derivative, diazotized, coupled with aminonaphthalenesulfonic...

  5. 40 CFR 74.45 - Reduced utilization for process sources. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Reduced utilization for process sources. 74.45 Section 74.45 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR....45 Reduced utilization for process sources....

  6. 40 CFR 721.10058 - Reaction product of alkylphenol, aromatic cyclicamine, alkyl diglycidyl dibenzene, and...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Reaction product of alkylphenol... Reaction product of alkylphenol, aromatic cyclicamine, alkyl diglycidyl dibenzene, and formaldehyde... identified generically as reaction product of alkylphenol, aromatic cyclicamine, alkyl diglycidyl...

  7. 40 CFR 721.10059 - Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Reaction product of alkylphenyl... Reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and alkyl diglycidyl dibenzene... identified generically as reaction product of alkylphenyl glycidyl ether, polyalkylenepolyamine, and...

  8. 40 CFR 19.3 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false 19.3 Section 19.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL ADJUSTMENT OF CIVIL MONETARY PENALTIES FOR INFLATION § 19.3...

  9. 30 CFR 256.38 - Joint bidding provisions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Joint bidding provisions. 256.38 Section 256.38 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND ENFORCEMENT, DEPARTMENT OF THE....38 Joint bidding provisions....

  10. 40 CFR 468.16 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollution control... best conventional pollution control technology (BCT)....

  11. 40 CFR Appendix X to Part 268 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false X Appendix X to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendix X to Part 268...

  12. 40 CFR 211.206 - Methods for measurement of sound attenuation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Methods for measurement of sound attenuation. 211.206 Section 211.206 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... measurement of sound attenuation....

  13. 32 CFR 2001.50 - Telecommunications automated information systems and network security.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 6 2011-07-01 2011-07-01 false Telecommunications automated information systems... NATIONAL SECURITY INFORMATION Safeguarding § 2001.50 Telecommunications automated information systems and... Directive (ICD) 503, Intelligence Community Information Technology Systems Security Risk...

  14. 33 CFR 117.671 - Upper Mississippi River.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Upper Mississippi River. 117.671... DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Minnesota § 117.671 Upper Mississippi River. (a) The.... Mississippi...

  15. 40 CFR Appendix F to Part 58 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 5 2011-07-01 2011-07-01 false F Appendix F to Part 58 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) AMBIENT AIR QUALITY SURVEILLANCE Appendix F to Part 58...

  16. 40 CFR 240.203 - General design.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false General design. 240.203 Section 240.203 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR... design....

  17. 32 CFR 196.210 - Military and merchant marine educational institutions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 2 2011-07-01 2011-07-01 false Military and merchant marine educational... OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Coverage § 196.210 Military and merchant marine... marine....

  18. 36 CFR 1211.210 - Military and merchant marine educational institutions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Military and merchant marine... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Coverage § 1211.210 Military and merchant marine... marine....

  19. 40 CFR Appendix V to Part 268 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false V Appendix V to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendix V to Part 268...

  20. 28 CFR 545.11 - Procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... participation in residential drug treatment programs. ... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Procedures. 545.11 Section 545.11 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT WORK...

  1. Turbine disc sealing assembly

    DOEpatents

    Diakunchak, Ihor S.

    2013-03-05

    A disc seal assembly for use in a turbine engine. The disc seal assembly includes a plurality of outwardly extending sealing flange members that define a plurality of fluid pockets. The sealing flange members define a labyrinth flow path therebetween to limit leakage between a hot gas path and a disc cavity in the turbine engine.

  2. Mechanical seal assembly

    DOEpatents

    Kotlyar, Oleg M.

    2001-01-01

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  3. Mechanical seal assembly

    DOEpatents

    Kotlyar, Oleg M.

    2002-01-01

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transfering it to the mechanical diode.

  4. Turbine blade platform seal

    SciTech Connect

    Zagar, Thomas W.; Schiavo, Anthony L.

    2001-01-01

    A rotating blade group 90 for a turbo-machine having an improved device for sealing the gap 110 between the edges 112,114 of adjacent blade platforms 96,104. The gap 110 between adjacent blades 92,100 is sealed by a seal pin 20 its central portion 110 and by a seal plate 58,60 at each of the front 54 and rear 56 portions. The seal plates 58,60 are inserted into corresponding grooves 62,64 formed in the adjacent edges 112,114 of adjoining blades 92,100 and held in place by end plates 40,42. The end of the seal plates 58,60 may be chamfered 78,80 to improve the seal against the end plate 40,42. The seal pin 20 provides the required damping between the blades 92,100 and the seal plates 58,60 provide improved sealing effectiveness.

  5. Seal design alternatives study

    SciTech Connect

    Van Sambeek, L.L.

    1993-06-01

    This report presents the results from a study of various sealing alternatives for the WIPP sealing system. Overall, the sealing system has the purpose of reducing to the extent possible the potential for fluids (either gas or liquid) from entering or leaving the repository. The sealing system is divided into three subsystems: drift and panel seals within the repository horizon, shaft seals in each of the four shafts, and borehole seals. Alternatives to the baseline configuration for the WIPP seal system design included evaluating different geometries and schedules for seal component installations and the use of different materials for seal components. Order-of-magnitude costs for the various alternatives were prepared as part of the study. Firm recommendations are not presented, but the advantages and disadvantages of the alternatives are discussed. Technical information deficiencies are identified and studies are outlined which can provide required information.

  6. Rotary shaft sealing assembly

    DOEpatents

    Dietle, Lannie L; Schroeder, John E; Kalsi, Manmohan S; Alvarez, Patricio D

    2013-08-13

    A rotary shaft sealing assembly in which a first fluid is partitioned from a second fluid in a housing assembly having a rotary shaft located at least partially within. In one embodiment a lip seal is lubricated and flushed with a pressure-generating seal ring preferably having an angled diverting feature. The pressure-generating seal ring and a hydrodynamic seal may be used to define a lubricant-filled region with each of the seals having hydrodynamic inlets facing the lubricant-filled region. Another aspect of the sealing assembly is having a seal to contain pressurized lubricant while withstanding high rotary speeds. Another rotary shaft sealing assembly embodiment includes a lubricant supply providing a lubricant at an elevated pressure to a region between a lip seal and a hydrodynamic seal with a flow control regulating the flow of lubricant past the lip seal. The hydrodynamic seal may include an energizer element having a modulus of elasticity greater than the modulus of elasticity of a sealing lip of the hydrodynamic seal.

  7. Rotary shaft sealing assembly

    DOEpatents

    Dietle, Lannie L.; Schroeder, John E.; Kalsi, Manmohan S.; Alvarez, Patricio D.

    2010-09-21

    A rotary shaft sealing assembly in which a first fluid is partitioned from a second fluid in a housing assembly having a rotary shaft located at least partially within. In one embodiment a lip seal is lubricated and flushed with a pressure-generating seal ring preferably having an angled diverting feature. The pressure-generating seal ring and a hydrodynamic seal may be used to define a lubricant-filled region with each of the seals having hydrodynamic inlets facing the lubricant-filled region. Another aspect of the sealing assembly is having a seal to contain pressurized lubricant while withstanding high rotary speeds. Another rotary shaft sealing assembly embodiment includes a lubricant supply providing a lubricant at an elevated pressure to a region between a lip seal and a hydrodynamic seal with a flow control regulating the flow of lubricant past the lip seal. The hydrodynamic seal may include an energizer element having a modulus of elasticity greater than the modulus of elasticity of a sealing lip of the hydrodynamic seal.

  8. The modified Cobra Seal

    SciTech Connect

    Ystesund, K.J.; Drayer, D.D.

    1990-01-01

    The Cobra Seal was developed in response to the International Atomic Energy Agency's request for an in situ verifiable seal. The Type E metal cap seal, still widely used by the IAEA, must be removed and returned to Agency headquarters for verification. The Cobra Seal allows an inspector to verify seal identity and integrity on site, without removing the seal. The seal consists of a loop of multi-strand fiber optic cable, which can be routed around or through the object to be sealed, and a seal body that secures the ends of the fiber optic cable. A cutting blade in the seal body randomly cuts a portion of the optical fibers in the cable. After the seal assembly is completed, a reference image is recorded of the unique pattern of light spots produced when the seal face is illuminated. Subsequent photographs of the seal pattern are compared to the original to establish the seal identity and integrity. This paper reviews the improvements and the technology of the cobra seal system. 3 refs., 5 figs.

  9. Tamper-Indicating Quantum Seal*

    NASA Astrophysics Data System (ADS)

    Williams, Brian P.; Britt, Keith A.; Humble, Travis S.

    2016-01-01

    Technical means for identifying when tampering occurs is a critical part of many containment and surveillance technologies. Conventional fiber-optic seals provide methods for monitoring enclosed inventories, but they are vulnerable to spoofing attacks based on classical physics. We address these vulnerabilities with the development of a quantum seal that offers the ability to detect the intercept-resend attack using quantum integrity verification. Our approach represents an application of entanglement to provide guarantees in the authenticity of the seal state by verifying it is transmitted coherently. We implement these ideas using polarization-entangled photon pairs that are verified after passing through a fiber-optic-channel test bed. Using binary-detection theory, we find the probability of detecting inauthentic signals is greater than 0.9999 with a false-alarm chance of 1 0-9 for a 10-s sampling interval. In addition, we show how the Hong-Ou-Mandel effect concurrently provides a tight bound on redirection attack, in which tampering modifies the shape of the seal. Our measurements limit the tolerable path-length change to submillimeter disturbances. These tamper-indicating features of the quantum seal offer unprecedented security for unattended monitoring systems.

  10. 19 CFR 122.185 - Report of loss or theft of Customs access seal.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Report of loss or theft of Customs access seal... Report of loss or theft of Customs access seal. The loss or theft of an approved Customs access seal must be promptly reported in writing by the employee to the port director. The Customs access seal may...

  11. 10 CFR 1.53 - Use of NRC seal or replicas.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Use of NRC seal or replicas. 1.53 Section 1.53 Energy NUCLEAR REGULATORY COMMISSION STATEMENT OF ORGANIZATION AND GENERAL INFORMATION NRC Seal and Flag § 1.53 Use of NRC seal or replicas. (a) The use of the seal or replicas is restricted to the following:...

  12. 20 CFR 369.5 - Penalty for misuse of the seal.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Penalty for misuse of the seal. 369.5 Section... OF THE SEAL OF THE RAILROAD RETIREMENT BOARD § 369.5 Penalty for misuse of the seal. Unauthorized use of the seal of the Railroad Retirement Board may result in criminal prosecution under applicable law....

  13. 48 CFR 6101.34 - Seal of the Board [Rule 34].

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 7 2012-10-01 2012-10-01 false Seal of the Board . 6101... SERVICES ADMINISTRATION CONTRACT DISPUTE CASES 6101.34 Seal of the Board . The Seal of the Board shall be a... Seal shall be the means of authentication of all records, notices, orders, dismissals,...

  14. 19 CFR 122.188 - Issuance of temporary Customs access seal.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Issuance of temporary Customs access seal. 122.188... temporary Customs access seal. (a) Conditions for issuance. When an approved Customs access seal is required... temporary Customs access seal for his employee. The employer must satisfy the port director that a...

  15. 10 CFR 1.53 - Use of NRC seal or replicas.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Use of NRC seal or replicas. 1.53 Section 1.53 Energy NUCLEAR REGULATORY COMMISSION STATEMENT OF ORGANIZATION AND GENERAL INFORMATION NRC Seal and Flag § 1.53 Use of NRC seal or replicas. (a) The use of the seal or replicas is restricted to the following:...

  16. 10 CFR 60.134 - Design of seals for shafts and boreholes.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Design of seals for shafts and boreholes. 60.134 Section....134 Design of seals for shafts and boreholes. (a) General design criterion. Seals for shafts and... closure. (b) Selection of materials and placement methods. Materials and placement methods for seals...

  17. 20 CFR 369.5 - Penalty for misuse of the seal.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Penalty for misuse of the seal. 369.5 Section... OF THE SEAL OF THE RAILROAD RETIREMENT BOARD § 369.5 Penalty for misuse of the seal. Unauthorized use of the seal of the Railroad Retirement Board may result in criminal prosecution under applicable law....

  18. 10 CFR 1.53 - Use of NRC seal or replicas.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Use of NRC seal or replicas. 1.53 Section 1.53 Energy NUCLEAR REGULATORY COMMISSION STATEMENT OF ORGANIZATION AND GENERAL INFORMATION NRC Seal and Flag § 1.53 Use of NRC seal or replicas. (a) The use of the seal or replicas is restricted to the following:...

  19. 19 CFR 122.188 - Issuance of temporary Customs access seal.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Issuance of temporary Customs access seal. 122.188... temporary Customs access seal. (a) Conditions for issuance. When an approved Customs access seal is required... temporary Customs access seal for his employee. The employer must satisfy the port director that a...

  20. 10 CFR 60.134 - Design of seals for shafts and boreholes.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Design of seals for shafts and boreholes. 60.134 Section....134 Design of seals for shafts and boreholes. (a) General design criterion. Seals for shafts and... closure. (b) Selection of materials and placement methods. Materials and placement methods for seals...

  1. 48 CFR 6101.34 - Seal of the Board [Rule 34].

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Seal of the Board . 6101... SERVICES ADMINISTRATION CONTRACT DISPUTE CASES 6101.34 Seal of the Board . The Seal of the Board shall be a... Seal shall be the means of authentication of all records, notices, orders, dismissals,...

  2. 19 CFR 122.186 - Presentation of Customs access seal by other person.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Presentation of Customs access seal by other... Presentation of Customs access seal by other person. If an approved Customs access seal is presented by a person other than the one to whom it was issued, the Customs access seal will be removed and...

  3. 19 CFR 122.186 - Presentation of Customs access seal by other person.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Presentation of Customs access seal by other... Presentation of Customs access seal by other person. If an approved Customs access seal is presented by a person other than the one to whom it was issued, the Customs access seal will be removed and...

  4. 10 CFR 1002.31 - Unauthorized uses of the seal and flag.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Unauthorized uses of the seal and flag. 1002.31 Section 1002.31 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG Unauthorized Uses § 1002.31 Unauthorized uses of the seal and flag. The official seal and distinguishing...

  5. 10 CFR 60.134 - Design of seals for shafts and boreholes.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Design of seals for shafts and boreholes. 60.134 Section....134 Design of seals for shafts and boreholes. (a) General design criterion. Seals for shafts and... closure. (b) Selection of materials and placement methods. Materials and placement methods for seals...

  6. 19 CFR 122.185 - Report of loss or theft of Customs access seal.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Report of loss or theft of Customs access seal... Report of loss or theft of Customs access seal. The loss or theft of an approved Customs access seal must be promptly reported in writing by the employee to the port director. The Customs access seal may...

  7. 19 CFR 122.185 - Report of loss or theft of Customs access seal.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Report of loss or theft of Customs access seal... Report of loss or theft of Customs access seal. The loss or theft of an approved Customs access seal must be promptly reported in writing by the employee to the port director. The Customs access seal may...

  8. 19 CFR 122.186 - Presentation of Customs access seal by other person.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Presentation of Customs access seal by other... Presentation of Customs access seal by other person. If an approved Customs access seal is presented by a person other than the one to whom it was issued, the Customs access seal will be removed and...

  9. 10 CFR 1002.31 - Unauthorized uses of the seal and flag.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Unauthorized uses of the seal and flag. 1002.31 Section 1002.31 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG Unauthorized Uses § 1002.31 Unauthorized uses of the seal and flag. The official seal and distinguishing...

  10. 48 CFR 6101.34 - Seal of the Board [Rule 34].

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 7 2014-10-01 2014-10-01 false Seal of the Board . 6101... SERVICES ADMINISTRATION CONTRACT DISPUTE CASES 6101.34 Seal of the Board . The Seal of the Board shall be a... Seal shall be the means of authentication of all records, notices, orders, dismissals,...

  11. 10 CFR 1.53 - Use of NRC seal or replicas.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Use of NRC seal or replicas. 1.53 Section 1.53 Energy NUCLEAR REGULATORY COMMISSION STATEMENT OF ORGANIZATION AND GENERAL INFORMATION NRC Seal and Flag § 1.53 Use of NRC seal or replicas. (a) The use of the seal or replicas is restricted to the following:...

  12. 10 CFR 60.134 - Design of seals for shafts and boreholes.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Design of seals for shafts and boreholes. 60.134 Section....134 Design of seals for shafts and boreholes. (a) General design criterion. Seals for shafts and... closure. (b) Selection of materials and placement methods. Materials and placement methods for seals...

  13. 10 CFR 1002.31 - Unauthorized uses of the seal and flag.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Unauthorized uses of the seal and flag. 1002.31 Section 1002.31 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG Unauthorized Uses § 1002.31 Unauthorized uses of the seal and flag. The official seal and distinguishing...

  14. 19 CFR 122.185 - Report of loss or theft of Customs access seal.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Report of loss or theft of Customs access seal... Report of loss or theft of Customs access seal. The loss or theft of an approved Customs access seal must be promptly reported in writing by the employee to the port director. The Customs access seal may...

  15. 20 CFR 369.5 - Penalty for misuse of the seal.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false Penalty for misuse of the seal. 369.5 Section... OF THE SEAL OF THE RAILROAD RETIREMENT BOARD § 369.5 Penalty for misuse of the seal. Unauthorized use of the seal of the Railroad Retirement Board may result in criminal prosecution under applicable law....

  16. 20 CFR 369.1 - Unofficial use of the seal of the Railroad Retirement Board.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false Unofficial use of the seal of the Railroad..., POLICY AND PROCEDURES USE OF THE SEAL OF THE RAILROAD RETIREMENT BOARD § 369.1 Unofficial use of the seal of the Railroad Retirement Board. Use of the seal of the Railroad Retirement Board for...

  17. 19 CFR 122.188 - Issuance of temporary Customs access seal.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Issuance of temporary Customs access seal. 122.188... temporary Customs access seal. (a) Conditions for issuance. When an approved Customs access seal is required... temporary Customs access seal for his employee. The employer must satisfy the port director that a...

  18. 10 CFR 60.134 - Design of seals for shafts and boreholes.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Design of seals for shafts and boreholes. 60.134 Section....134 Design of seals for shafts and boreholes. (a) General design criterion. Seals for shafts and... closure. (b) Selection of materials and placement methods. Materials and placement methods for seals...

  19. 19 CFR 122.185 - Report of loss or theft of Customs access seal.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Report of loss or theft of Customs access seal... Report of loss or theft of Customs access seal. The loss or theft of an approved Customs access seal must be promptly reported in writing by the employee to the port director. The Customs access seal may...

  20. 19 CFR 122.188 - Issuance of temporary Customs access seal.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Issuance of temporary Customs access seal. 122.188... temporary Customs access seal. (a) Conditions for issuance. When an approved Customs access seal is required... temporary Customs access seal for his employee. The employer must satisfy the port director that a...

  1. 10 CFR 1002.31 - Unauthorized uses of the seal and flag.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Unauthorized uses of the seal and flag. 1002.31 Section 1002.31 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG Unauthorized Uses § 1002.31 Unauthorized uses of the seal and flag. The official seal and distinguishing...

  2. 10 CFR 1002.31 - Unauthorized uses of the seal and flag.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Unauthorized uses of the seal and flag. 1002.31 Section 1002.31 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG Unauthorized Uses § 1002.31 Unauthorized uses of the seal and flag. The official seal and distinguishing...

  3. 48 CFR 6101.34 - Seal of the Board [Rule 34].

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Seal of the Board . 6101... SERVICES ADMINISTRATION CONTRACT DISPUTE CASES 6101.34 Seal of the Board . The Seal of the Board shall be a... Seal shall be the means of authentication of all records, notices, orders, dismissals,...

  4. 19 CFR 122.186 - Presentation of Customs access seal by other person.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Presentation of Customs access seal by other... Presentation of Customs access seal by other person. If an approved Customs access seal is presented by a person other than the one to whom it was issued, the Customs access seal will be removed and...

  5. 10 CFR 1.53 - Use of NRC seal or replicas.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Use of NRC seal or replicas. 1.53 Section 1.53 Energy NUCLEAR REGULATORY COMMISSION STATEMENT OF ORGANIZATION AND GENERAL INFORMATION NRC Seal and Flag § 1.53 Use of NRC seal or replicas. (a) The use of the seal or replicas is restricted to the following:...

  6. 10 CFR 34.27 - Leak testing and replacement of sealed sources.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Leak testing and replacement of sealed sources. 34.27... of sealed sources. (a) The replacement of any sealed source fastened to or contained in a radiographic exposure device and leak testing of any sealed source must be performed by persons authorized...

  7. 10 CFR 35.500 - Use of sealed sources for diagnosis.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Use of sealed sources for diagnosis. 35.500 Section 35.500 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Sealed Sources for Diagnosis § 35.500 Use of sealed sources for diagnosis. A licensee shall use only sealed sources for...

  8. 10 CFR 35.500 - Use of sealed sources for diagnosis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Use of sealed sources for diagnosis. 35.500 Section 35.500 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Sealed Sources for Diagnosis § 35.500 Use of sealed sources for diagnosis. A licensee shall use only sealed sources for...

  9. 10 CFR 35.500 - Use of sealed sources for diagnosis.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Use of sealed sources for diagnosis. 35.500 Section 35.500 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Sealed Sources for Diagnosis § 35.500 Use of sealed sources for diagnosis. A licensee shall use only sealed sources for...

  10. 10 CFR 1002.12 - Use of replicas, reproductions, and embossing seals.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Use of replicas, reproductions, and embossing seals. 1002... FLAG Official Seal § 1002.12 Use of replicas, reproductions, and embossing seals. (a) The Secretary and his designees are authorized to affix replicas, reproductions, and embossing seals to...

  11. 10 CFR 1002.12 - Use of replicas, reproductions, and embossing seals.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Use of replicas, reproductions, and embossing seals. 1002... FLAG Official Seal § 1002.12 Use of replicas, reproductions, and embossing seals. (a) The Secretary and his designees are authorized to affix replicas, reproductions, and embossing seals to...

  12. 10 CFR 1002.12 - Use of replicas, reproductions, and embossing seals.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Use of replicas, reproductions, and embossing seals. 1002... FLAG Official Seal § 1002.12 Use of replicas, reproductions, and embossing seals. (a) The Secretary and his designees are authorized to affix replicas, reproductions, and embossing seals to...

  13. 10 CFR 1002.12 - Use of replicas, reproductions, and embossing seals.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Use of replicas, reproductions, and embossing seals. 1002... FLAG Official Seal § 1002.12 Use of replicas, reproductions, and embossing seals. (a) The Secretary and his designees are authorized to affix replicas, reproductions, and embossing seals to...

  14. 10 CFR 1002.12 - Use of replicas, reproductions, and embossing seals.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Use of replicas, reproductions, and embossing seals. 1002... FLAG Official Seal § 1002.12 Use of replicas, reproductions, and embossing seals. (a) The Secretary and his designees are authorized to affix replicas, reproductions, and embossing seals to...

  15. Nuclear reactor sealing system

    DOEpatents

    McEdwards, James A.

    1983-01-01

    A liquid metal-cooled nuclear reactor sealing system. The nuclear reactor includes a vessel sealed at its upper end by a closure head. The closure head comprises at least two components, one of which is rotatable; and the two components define an annulus therebetween. The sealing system includes at least a first and second inflatable seal disposed in series in an upper portion of the annulus. The system further includes a dip seal extending into a body of insulation located adjacent a bottom portion of the closure head. The dip seal comprises a trough formed by a lower portion of one of the components, and a seal blade pendently supported from the other component and extending downwardly into the trough. A body of liquid metal is contained in the trough which submerges a portion of the seal blade. The seal blade is provided with at least one aperture located above the body of liquid metal for providing fluid communication between the annulus intermediate the dip seal and the inflatable seals, and a body of cover gas located inside the vessel. There also is provided means for introducing a purge gas into the annulus intermediate the inflatable seals and the seal blade. The purge gas is introduced in an amount sufficient to substantially reduce diffusion of radioactive cover gas or sodium vapor up to the inflatable seals. The purge gas mixes with the cover gas in the reactor vessel where it can be withdrawn from the vessel for treatment and recycle to the vessel.

  16. Compliant Foil Seal Investigations

    NASA Technical Reports Server (NTRS)

    Proctor, Margaret; Delgado, Irebert

    2004-01-01

    Room temperature testing of an 8.5 inch diameter foil seal was conducted in the High Speed, High Temperature Turbine Seal Test Rig at the NASA Glenn Research Center. The seal was operated at speeds up to 30,000 rpm and pressure differentials up to 75 psid. Seal leakage and power loss data will be presented and compared to brush seal performance. The failure of the seal and rotor coating at 30,000 rpm and 15 psid will be presented and future development needs discussed.

  17. Inboard seal mounting

    DOEpatents

    Hayes, John R.

    1983-01-01

    A regenerator assembly for a gas turbine engine has a hot side seal assembly formed in part by a cast metal engine block having a seal recess formed therein that is configured to supportingly receive ceramic support blocks including an inboard face thereon having a regenerator seal face bonded thereto. A pressurized leaf seal is interposed between the ceramic support block and the cast metal engine block to bias the seal wear face into sealing engagement with a hot side surface of a rotary regenerator matrix.

  18. Energy efficient face seal

    NASA Technical Reports Server (NTRS)

    Sehnal, J.; Sedy, J.; Etsion, I.; Zobens, A.

    1982-01-01

    Torque, face temperature, leakage, and wear of a flat face seal were compared with three coned face seals at pressures up to 2758 kPa and speeds up to 8000 rpm. Axial movement of the mating seal parts was recorded by a digital data acquisition system. The coning of the tungsten carbide primary ring ranged from .51 micro-m to 5.6 micro-m. The torque of the coned face seal balanced to 76.3% was an average 42% lower, the leakage eleven times higher, than that of the standard flat face seal. The reduction of the balance of the coned face seal to 51.3% resulted by decreasing the torque by an additional 44% and increasing leakage 12 to 230 times, depending on the seal shaft speed. No measurable wear was observed on the face of the coned seals.

  19. Sealed container sampling device

    NASA Technical Reports Server (NTRS)

    Hennigan, T. J.

    1969-01-01

    Sampling device, by means of a tapered needle, pierces a sealed container while maintaining the seal and either evacuates or pressurizes the container. This device has many applications in the chemical, preservative and battery-manufacturing industries.

  20. Magnetically Actuated Seal

    NASA Technical Reports Server (NTRS)

    Pinera, Alex

    2013-01-01

    This invention is a magnetically actuated seal in which either a single electromagnet, or multiple electromagnets, are used to control the seal's position. This system can either be an open/ close type of system or an actively controlled system.

  1. Titanium sealing glasses and seals formed therefrom

    DOEpatents

    Brow, R.K.; McCollister, H.L.; Phifer, C.C.; Day, D.E.

    1997-12-02

    Alkaline-earth lanthanoborate sealing-glass compositions containing CaO, La{sub 2}O{sub 3}, B{sub 2}O{sub 3}, TiO{sub 2} and Al{sub 2}O{sub 3} in various combinations of mole-% are provided. These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys that have a high aqueous durability for component or device applications requiring exposure to moisture, water or body fluids. Particular applications of the titanium sealing-glass compositions include forming glass-to-metal seals for lithium batteries and implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps). 2 figs.

  2. Titanium sealing glasses and seals formed therefrom

    DOEpatents

    Brow, Richard K.; McCollister, Howard L.; Phifer, Carol C.; Day, Delbert E.

    1997-01-01

    Alkaline-earth lanthanoborate sealing-glass compositions containing CaO, La.sub.2 O.sub.3, B.sub.2 O.sub.3, TiO.sub.2 and Al.sub.2 O.sub.3 in various combinations of mole-% are provided. These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys that have a high aqueous durability for component or device applications requiring exposure to moisture, water or body fluids. Particular applications of the titanium sealing-glass compositions include forming glass-to-metal seals for lithium batteries and implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps).

  3. Tamper-indicating seal

    DOEpatents

    Fiarman, Sidney; Degen, Michael F.; Peters, Henry F.

    1985-01-01

    There is disclosed a tamper-indicating seal that permits in the field inspection and detection of tampering. Said seal comprises a shrinkable tube having a visible pattern of markings which is shrunk over the item to be sealed, and a second transparent tube, having a second visible marking pattern, which is shrunk over the item and the first tube. The relationship between the first and second set of markings produces a pattern so that the seal may not be removed without detection.

  4. Security seal. [Patent application

    DOEpatents

    Gobeli, G.W.

    1981-11-17

    Security for a package or verifying seal in plastic material is provided by a print seal with unique thermally produced imprints in the plastic. If tampering is attempted, the material is irreparably damaged and thus detectable. The pattern of the imprints, similar to fingerprints are recorded as a positive identification for the seal, and corresponding recordings made to allow comparison. The integrity of the seal is proved by the comparison of imprint identification records made by laser beam projection.

  5. Turbomachine Interface Sealing

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.; Chupp, Raymond E.; Lattime, Scott B.; Steinetz, Bruce M.

    2005-01-01

    Sealing interfaces and coatings, like lubricants, are sacrificial, giving up their integrity for the benefit of the component. Clearance control is a major issue in power systems turbomachine design and operational life. Sealing becomes the most cost-effective way to enhance system performance. Coatings, films, and combined use of both metals and ceramics play a major role in maintaining interface clearances in turbomachine sealing and component life. This paper focuses on conventional and innovative materials and design practices for sealing interfaces.

  6. Resilient Braided Rope Seal

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M. (Inventor); Kren, Lawrence A. (Inventor)

    1996-01-01

    A resilient braided rope seal for use in high temperature applications. The resilient braided rope seal includes a center core of fibers, a resilient 5 member overbraided by at least one layer of braided sheath fibers tightly packed together. The resilient member adds significant stiffness to the seal while maintaining resiliency. Furthermore, the seal permanent set and hysteresis are greatly reduced. Finally, improved load capabilities are provided.

  7. Collapsable seal member

    DOEpatents

    Sherrell, Dennis L.

    1990-01-01

    A hollow, collapsable seal member normally disposed in a natural expanded state offering fail-safe pressure sealing against a seating surface and adapted to be evacuated by a vacuum force for collapsing the seal member to disengage the same from said seating surface.

  8. Skew resisting hydrodynamic seal

    DOEpatents

    Conroy, William T.; Dietle, Lannie L.; Gobeli, Jeffrey D.; Kalsi, Manmohan S.

    2001-01-01

    A novel hydrodynamically lubricated compression type rotary seal that is suitable for lubricant retention and environmental exclusion. Particularly, the seal geometry ensures constraint of a hydrodynamic seal in a manner preventing skew-induced wear and provides adequate room within the seal gland to accommodate thermal expansion. The seal accommodates large as-manufactured variations in the coefficient of thermal expansion of the sealing material, provides a relatively stiff integral spring effect to minimize pressure-induced shuttling of the seal within the gland, and also maintains interfacial contact pressure within the dynamic sealing interface in an optimum range for efficient hydrodynamic lubrication and environment exclusion. The seal geometry also provides for complete support about the circumference of the seal to receive environmental pressure, as compared the interrupted character of seal support set forth in U.S. Pat. Nos. 5,873,576 and 6,036,192 and provides a hydrodynamic seal which is suitable for use with non-Newtonian lubricants.

  9. Seals development and evaluation

    SciTech Connect

    Waddoups, I.G.; Horton, P.R.V.

    1994-08-01

    This paper discusses Sandia`s support of DOE`s domestic seals program. Testing was conducted on several pressure sensitive seals and a few wire loop seals currently in use as well as on a few new seals. The testing on new seals concentrated on loop seals and included two fiber optic seals and a recently available wire loop seal being considered for use. Environmental, handling and vulnerability testing were conducted. The standardized testing approach used and the results of the testing are summarized. The status of evaluations for using higher security active and passive seals for domestic applications is also presented. The conclusion of the testing -of seals currently in use is that, even though there is some variability in their ability to meet all the test criterion, they are all generally acceptable by the test standards used. The motivation for evaluating higher security seals is to ascertain if seals could be used in broader domestic environment and result in improved cost-effectiveness.

  10. Hydraulic System Seal Development.

    DTIC Science & Technology

    1981-06-01

    supplying the seal. Shamban, Fluorocarbon, Parker, Powty, Hercules, Disogrin, Bal Seal Engineering, American Variseal , Tetrafluor, Conover, and Greene...characteristics, as did the Variseal , but both caused minor rod scoring. The Greene Tweed llytrel seal was not considered for further testing becduse

  11. Fuel cell manifold sealing system

    DOEpatents

    Grevstad, Paul E.; Johnson, Carl K.; Mientek, Anthony P.

    1980-01-01

    A manifold-to-stack seal and sealing method for fuel cell stacks. This seal system solves the problem of maintaining a low leak rate manifold seal as the fuel cell stack undergoes compressive creep. The seal system eliminates the problem of the manifold-to-stack seal sliding against the rough stack surface as the stack becomes shorter because of cell creep, which relative motion destroys the seal. The seal system described herein utilizes a polymer seal frame firmly clamped between the manifold and the stack such that the seal frame moves with the stack. Thus, as the stack creeps, the seal frame creeps with it, and there is no sliding at the rough, tough to seal, stack-to-seal frame interface. Here the sliding is on a smooth easy to seal location between the seal frame and the manifold.

  12. SEAL FOR ROTATING SHAFT

    DOEpatents

    Coffman, R.T.

    1957-12-10

    A seal is described for a rotatable shaft that must highly effective when the shaft is not rotating but may be less effective while the shaft is rotating. Weights distributed about a sealing disk secured to the shaft press the sealing disk against a tubular section into which the shiilt extends, and whem the shaft rotates, the centrifugal forces on the weights relieve the pressurc of the sealing disk against the tubular section. This action has the very desirible result of minimizing the wear of the rotating disk due to contact with the tubular section, while affording maximum sealing action when it is needed.

  13. Tamper-indicating seal

    DOEpatents

    Fiarman, S.; Degen, M.F.; Peters, H.F.

    1982-08-13

    There is disclosed a tamper-indicating seal that permits in the field inspection and detection of tampering. Said seal comprises a shrinkable tube having a visible pattern of markings which is shrunk over th item to be sealed, and a second transparent tube, having a second visible marking pattern, which is shrunk over the item and the first tube. The relationship between the first and second set of markings produces a pattern so that the seal may not be removed without detection. The seal is particularly applicable to UF/sub 6/ cylinder valves.

  14. Low Cost, Durable Seal

    SciTech Connect

    Roberts, George; Parsons, Jason; Friedman, Jake

    2010-12-17

    Seal durability is critical to achieving the 2010 DOE operational life goals for both stationary and transportation PEM fuel cell stacks. The seal material must be chemically and mechanically stable in an environment consisting of aggressive operating temperatures, humidified gases, and acidic membranes. The seal must also be producible at low cost. Currentlyused seal materials do not meet all these requirements. This project developed and demonstrated a high consistency hydrocarbon rubber seal material that was able to meet the DOE technical and cost targets. Significant emphasis was placed on characterization of the material and full scale molding demonstrations.

  15. Rotary kiln seal

    SciTech Connect

    Drexler, Robert L.

    1992-01-01

    A rotary seal used to prevent the escape of contaminates from a rotating kiln incinerator. The rotating seal combines a rotating disc plate which is attached to the rotating kiln shell and four sets of non-rotating carbon seal bars housed in a primary and secondary housing and which rub on the sides of the disc. A seal air system is used to create a positive pressure in a chamber between the primary and secondary seals to create a positive air flow into the contaminated gas chamber. The seal air system also employs an air inlet located between the secondary and tertiary seals to further insure that no contaminates pass the seal and enter the external environment and to provide makeup air for the air which flows into the contaminated gas chamber. The pressure exerted by the seal bars on the rotating disc is controlled by means of a preload spring. The seal is capable of operating in a thermally changing environment where the both radial expansion and axial movement of the rotating kiln do not result in the failure of the seal.

  16. COMPRESSION SEAL AND SEALING MATERIAL THEREFOR

    DOEpatents

    Branin, T.G.

    1962-05-29

    This patent relates to compression seal and more particularly to a seaiing material therefor. The sealing surface is a coating consisting of alternate layers of gold and of a non-gold metal having similar plastic flow properties under pressure as gold. The coating is substantially free from oxidation effects when exposed to ambient atmosphere and does not become brittle when worked, as in a valve. (AEC)

  17. Shaft seal system

    DOEpatents

    Kapich, Davorin D.

    1985-01-01

    A shaft seal system is disclosed for isolating two regions of different fluid mediums through which a rotatable shaft extends. The seal system includes a seal housing through which the shaft extends and which defines an annular land and an annular labyrinth both of which face on the shaft so that each establishes a corresponding fluid sealing annulus. A collection cavity is formed in communication with the annular sealing spaces, and fluids compatible with the fluids in each of the two regions to be isolated are introduced, respectively, into the annular sealing spaces and collected in the collection cavity from which the fluid mixture is removed and passed to a separator which separates the fluids and returns them to their respective annular sealing spaces in a recycling manner. In the illustrated embodiment, the isolated fluid mediums comprise a liquid region and a gas region. Gas is removed from the gas region and passed through a purifier and a gas pump operative to introduce the purified gas through the labyrinth sealing annulus to the collection cavity. After passing to the separator, the separated gas is passed through a dryer from which the dried gas is caused to pass through the labyrinth sealing annulus into the collection cavity independently of the purified gas so as to insure isolation of the gas region in the event of sealing gas pump malfunction.

  18. Contracting/expanding self-sealing cryogenic tube seals

    NASA Technical Reports Server (NTRS)

    Jia, Lin X. (Inventor)

    1997-01-01

    Contracting/expanding self-sealing cryogenic tube seals are disclosed which use the different properties of thermal contraction and expansion of selected dissimilar materials in accord with certain design criteria to yield self-tightening seals via sloped-surface sealing. The seals of the subject invention are reusable, simple to assemble, and adaptable to a wide variety of cryogenic applications.

  19. Layered seal for turbomachinery

    DOEpatents

    Sarawate, Neelesh Nandkumar; Morgan, Victor John; Weber, David Wayne

    2015-11-20

    The present application provides seal assemblies for reducing leakages between adjacent components of turbomachinery. The seal assemblies may include outer shims, and at least a portion of the outer shims may be substantially impervious. At least one of the outer shims may be configured for sealing engagement with seal slots of the adjacent components. The seal assemblies may also include at least one of an inner shim and a filler layer positioned between the outer shims. The at least one inner shim may be substantially solid and the at least one filler layer may be relatively porous. The seal assemblies may be sufficiently flexible to account for misalignment between the adjacent components, sufficiently stiff to meet assembly requirements, and sufficiently robust to operating meet requirements associated with turbomachinery.

  20. Seals Code Development Workshop

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C. (Compiler); Liang, Anita D. (Compiler)

    1996-01-01

    Seals Workshop of 1995 industrial code (INDSEAL) release include ICYL, GCYLT, IFACE, GFACE, SPIRALG, SPIRALI, DYSEAL, and KTK. The scientific code (SCISEAL) release includes conjugate heat transfer and multidomain with rotordynamic capability. Several seals and bearings codes (e.g., HYDROFLEX, HYDROTRAN, HYDROB3D, FLOWCON1, FLOWCON2) are presented and results compared. Current computational and experimental emphasis includes multiple connected cavity flows with goals of reducing parasitic losses and gas ingestion. Labyrinth seals continue to play a significant role in sealing with face, honeycomb, and new sealing concepts under investigation for advanced engine concepts in view of strict environmental constraints. The clean sheet approach to engine design is advocated with program directions and anticipated percentage SFC reductions cited. Future activities center on engine applications with coupled seal/power/secondary flow streams.

  1. Dynamic sealing principles

    NASA Technical Reports Server (NTRS)

    Zuk, J.

    1976-01-01

    The fundamental principles governing dynamic sealing operation are discussed. Different seals are described in terms of these principles. Despite the large variety of detailed construction, there appear to be some basic principles, or combinations of basic principles, by which all seals function, these are presented and discussed. Theoretical and practical considerations in the application of these principles are discussed. Advantages, disadvantages, limitations, and application examples of various conventional and special seals are presented. Fundamental equations governing liquid and gas flows in thin film seals, which enable leakage calculations to be made, are also presented. Concept of flow functions, application of Reynolds lubrication equation, and nonlubrication equation flow, friction and wear; and seal lubrication regimes are explained.

  2. Mechanically expandable annular seal

    DOEpatents

    Gilmore, R.F.

    1983-07-19

    A mechanically expandable annular reusable seal assembly to form an annular hermetic barrier between two stationary, parallel, and planar containment surfaces is described. A rotatable ring, attached to the first surface, has ring wedges resembling the saw-tooth array of a hole saw. Matching seal wedges are slidably attached to the ring wedges and have their motion restricted to be perpendicular to the second surface. Each seal wedge has a face parallel to the second surface. An annular elastomer seal has a central annular region attached to the seal wedges' parallel faces and has its inner and outer circumferences attached to the first surface. A rotation of the ring extends the elastomer seal's central region perpendicularly towards the second surface to create the fluid tight barrier. A counter rotation removes the barrier. 6 figs.

  3. Mechanically expandable annular seal

    DOEpatents

    Gilmore, Richard F.

    1983-01-01

    A mechanically expandable annular reusable seal assembly to form an annular hermetic barrier between two stationary, parallel, and planar containment surfaces. A rotatable ring, attached to the first surface, has ring wedges resembling the saw-tooth array of a hole saw. Matching seal wedges are slidably attached to the ring wedges and have their motion restricted to be perpendicular to the second surface. Each seal wedge has a face parallel to the second surface. An annular elastomer seal has a central annular region attached to the seal wedges' parallel faces and has its inner and outer circumferences attached to the first surface. A rotation of the ring extends the elastomer seal's central region perpendicularly towards the second surface to create the fluidtight barrier. A counterrotation removes the barrier.

  4. Sodium sulfur battery seal

    DOEpatents

    Mikkor, Mati

    1981-01-01

    This disclosure is directed to an improvement in a sodium sulfur battery construction in which a seal between various battery compartments is made by a structure in which a soft metal seal member is held in a sealing position by holding structure. A pressure applying structure is used to apply pressure on the soft metal seal member when it is being held in sealing relationship to a surface of a container member of the sodium sulfur battery by the holding structure. The improvement comprises including a thin, well-adhered, soft metal layer on the surface of the container member of the sodium sulfur battery to which the soft metal seal member is to be bonded.

  5. Compliant Turbomachine Sealing

    NASA Technical Reports Server (NTRS)

    Hendricks, R. C.; Braun, M. J.; Deng, D.; Hendricks, J. A.

    2011-01-01

    Sealing interface materials and coatings are sacrificial, giving up their integrity for the benefit of the component. Seals that are compliant while still controlling leakage, dynamics, and coolant flows are sought to enhance turbomachine performance. Herein we investigate the leaf-seal configuration. While the leaf seal is classified as contacting, a ready modification using the leaf-housing arrangement in conjunction with an interface film rider (a bore seal, for example) provides for a film-riding noncontact seal. The leaf housing and leaf elements can be made from a variety of materials from plastic to ceramic. Four simplistic models are used to identify the physics essential to controlling leakage. Corroborated by CFD, these results provide design parameters for applications to within reasonable engineering certainty. Some potential improvements are proposed.

  6. Damped flexible seal

    SciTech Connect

    DuBois, Neil J.; Amaral, Antonio M.

    1992-10-27

    A damped flexible seal assembly for a torpedo isolates the tailcone thereof rom vibrational energy present in the drive shaft assembly. A pair of outside flanges, each of which include an inwardly facing groove and an O-ring constrained therein, provide a watertight seal against the outer non-rotating surface of the drive shaft assembly. An inside flange includes an outwardly-facing groove and an O-ring constrained therein, and provides a watertight seal against the inner surface of the tail cone. Two cast-in-place elastomeric seals provide a watertight seal between the flanges and further provide a damping barrier between the outside flanges and the inside flanges for damping vibrational energy present in the drive shaft assembly before the energy can reach the tailcone through the seal assembly.

  7. Inflatable traversing probe seal

    NASA Technical Reports Server (NTRS)

    Trimarchi, Paul A.

    1991-01-01

    An inflatable seal acts as a pressure-tight zipper to provide traversing capability for instrumentation rakes and probes. A specially designed probe segment with a teardrop cross-section in the vicinity of the inflatable seal minimizes leakage at the interface. The probe is able to travel through a lengthwise slot in a pressure vessel or wind tunnel section, while still maintaining pressure integrity. The design uses two commercially available inflatable seals, opposing each other, to cover the probe slot in a wind tunnel wall. Proof-of-concept tests were conducted at vessel pressures up to 30 psig, with seals inflated to 50 psig, showing no measurable leakage along the seal's length or around the probe teardrop cross-section. This seal concept can replace the existing technology of sliding face plate/O-ring systems in applications where lengthwise space is limited.

  8. Liquid Annular Seal Research

    NASA Technical Reports Server (NTRS)

    Palazzolo, Alan B.; Venkataraman, Balaji; Padavala, Sathya S.; Ryan, Steve; Vallely, Pat; Funston, Kerry

    1996-01-01

    This paper highlights the accomplishments on a joint effort between NASA - Marshall Space Flight Center and Texas A and M University to develop accurate seal analysis software for use in rocket turbopump design, design audits and trouble shooting. Results for arbitrary clearance profile, transient simulation, thermal effects solution and flexible seal wall model are presented. A new solution for eccentric seals based on cubic spline interpolation and ordinary differential equation integration is also presented.

  9. Compliant seal development

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.

    1993-01-01

    The compliant metallic seal combines the noncontact feature of the labyrinth seal, the low leakage of a mechanical seal, and the compliant nature of the brush seal. It consists of several thin metallic elements or leaves mounted within a ring which is press fit into the housing, and in form, sort of resembles a lip seal sections wiping the shaft. A second set of overlapping cover leaves are placed on top of the shaft riding leaves which reduces leakage and provides stiffness. The leaves can be straight or angle cut. The shaft riding fingers are designed with mismatched curvature to provide lift off similar to the Rayleigh lift pads in mechanical seals with leading edge clearances nearly twice those of the trailing edge as as shown by Fleming to be optimal for gas flows in convergent seal passages. Leading edge clearances range from 300 to 500 microinches. Balance pockets beneath the leaves provide fluid film feed to the 'Rayleigh lift' surface and the proper balance ratio (mechanical seal) when combined with the static pressure and film pressure. The leaves flex in the radial direction and accommodate thermomechanical behavior as well as axial motion and angular misalignment. In the static mode, there is a net closing force on the leaves. The seals were tested to 70 psi at speeds to 16,000 rpm or surface speeds to 330 fps and temperatures from ambient to 440 F. A slow cycle through the rig critical at 10,000 rpm induced a radial vibration response of 0.004 to 0.005 inch were accommodated by the seal. Preliminary performance data are encouraging demonstrating hydrodynamic liftoff and noncontacting operation at pressure and speeds typical of gas turbine engines. The leakage performance data are significantly better than commercial labyrinth and brush seals which should be expected as this design incorporates the features of the low leakage face or mechanical seal along with the flexibility of the brush configuration.

  10. Seals Flow Code Development

    NASA Technical Reports Server (NTRS)

    1991-01-01

    In recognition of a deficiency in the current modeling capability for seals, an effort was established by NASA to develop verified computational fluid dynamic concepts, codes, and analyses for seals. The objectives were to develop advanced concepts for the design and analysis of seals, to effectively disseminate the information to potential users by way of annual workshops, and to provide experimental verification for the models and codes under a wide range of operating conditions.

  11. Grayloc seal static tests

    SciTech Connect

    Leisher, W.B.; Biffle, J.H.

    1983-02-01

    A series of evaluation tests was performed on Grayloc seals. Helium service and standard seals, size 292, were used. Measurements were made of axial force and motion, diameter, hoop and axial strain, and helium leak rate. Leak rates were in the 10/sup -6/ atm cc/s range for the helium service seals. Pretest analytical calculations agreed reasonably well with measured makeup forces and deflections.

  12. Repository seals requirements study

    SciTech Connect

    1997-11-03

    The Yucca Mountain Site Characterization Project, managed by the Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M and O) is conducting investigations to support the Viability Assessment and the License Application for a high-level nuclear waste repository at Yucca Mountain, Nevada. The sealing subsystem is part of the Yucca Mountain Waste Isolation System. The Yucca Mountain Site Characterization Project is currently evaluating the role of the sealing subsystem (shaft, ramp and exploratory borehole seals) in achieving the overall performance objectives for the Waste Isolation System. This report documents the results of those evaluations. This report presents the results of a repository sealing requirements study. Sealing is defined as the permanent closure of the shafts, ramps, and exploratory boreholes. Sealing includes those components that would reduce potential inflows above the repository, or that would divert flow near the repository horizon to allow vertical infiltration to below the repository. Sealing of such features as emplacement drifts was not done in this study because the current capability to calculate fracture flow into the drifts is not sufficiently mature. The objective of the study is to provide water or air flow performance based requirements for shafts, ramps, and exploratory boreholes located near the repository. Recommendations, as appropriate, are provided for developing plans, seals component testing, and other studies relating to sealing.

  13. Foil Face Seal Testing

    NASA Technical Reports Server (NTRS)

    Munson, John

    2009-01-01

    In the seal literature you can find many attempts by various researchers to adapt film riding seals to the gas turbine engine. None have been successful, potential distortion of the sealing faces is the primary reason. There is a film riding device that does accommodate distortion and is in service in aircraft applications, namely the foil bearing. More specifically a foil thrust bearing. These are not intended to be seals, and they do not accommodate large axial movement between shaft & static structure. By combining the 2 a unique type of face seal has been created. It functions like a normal face seal. The foil thrust bearing replaces the normal primary sealing surface. The compliance of the foil bearing allows the foils to track distortion of the mating seal ring. The foil seal has several perceived advantages over existing hydrodynamic designs, enumerated in the chart. Materials and design methodology needed for this application already exist. Also the load capacity requirements for the foil bearing are low since it only needs to support itself and overcome friction forces at the antirotation keys.

  14. Bidirectional Brush Seals

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.; Wilson, Jack; Wu, Tom; Flower, Ralph

    1997-01-01

    Presented is a study of the use of a set of I.D./O.D. bidirectional press seals to reduce the leakage losses in a wave rotor. Relative to the baseline configuration, data indicate the use of brush seals enhanced wave rotor efficiency from 36 to 45 percent at low leakages (small rotor endwall gap spacings) and from 15 to 33 percent at high leakages (larger endwall gap spacings). These brush seals are capable of sealing positive or negative pressure drops with respect to the axial direction. Surface tribology for these tests suggested little evidence of grooving although the bristles appeared polished.

  15. Liquid zone seal

    DOEpatents

    Klebanoff, Leonard E.

    2001-01-01

    A seal assembly that provides a means for establishing multiple pressure zones within a system. The seal assembly combines a plate extending from the inner wall of a housing or inner enclosure that intersects with and is immersed in the fluid contained in a well formed in a tray contained within the enclosure. The fluid is a low vapor pressure oil, chemically inert and oxidation resistant. The use of a fluid as the sealing component provides a seal that is self-healing and mechanically robust not subject to normal mechanical wear, breakage, and formation of cracks or pinholes and decouples external mechanical vibrations from internal structural members.

  16. High Pressure Hydraulic Seals

    DTIC Science & Technology

    1988-09-01

    looked XV2690-18D Ring good, front seal XP2714-4 Backups, (ML1841) cracked. American Variseal /Shamban 100,493 110cc leakage on P/N AS-1272 rear seal...BACKUPS SEVERELY SEAL CEC 49S1C-214-DS DETERIORATED. 38. AMERICAN VARISEAL / TESTED THROUGH 100.493 CYCLES. EXCESSIVE LEAKAGE 110 CC SHAMBAN ON REAR SEAL...California 90230 Koppers Company, Inc. Baltimore, Maryland 21203 American Variseal Corp. Broomfield, Colorado 80020 The test actuator parts were serialized

  17. 49 CFR 192.187 - Vaults: Sealing, venting, and ventilation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Vaults: Sealing, venting, and ventilation. 192.187... Components § 192.187 Vaults: Sealing, venting, and ventilation. Each underground vault or closed top pit... ventilating effect of a pipe 4 inches (102 millimeters) in diameter; (2) The ventilation must be enough...

  18. 49 CFR 192.187 - Vaults: Sealing, venting, and ventilation.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Vaults: Sealing, venting, and ventilation. 192.187... Components § 192.187 Vaults: Sealing, venting, and ventilation. Each underground vault or closed top pit... ventilating effect of a pipe 4 inches (102 millimeters) in diameter; (2) The ventilation must be enough...

  19. 12 CFR 1700.3 - Official logo and seal.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 7 2011-01-01 2011-01-01 false Official logo and seal. 1700.3 Section 1700.3... DEVELOPMENT OFHEO ORGANIZATION AND FUNCTIONS ORGANIZATION AND FUNCTIONS § 1700.3 Official logo and seal. The section describes and displays the logo adopted by the Director as the official symbol representing...

  20. 12 CFR 905.26 - Official logo and seal.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Official logo and seal. 905.26 Section 905.26... OPERATIONS DESCRIPTION OF ORGANIZATION AND FUNCTIONS Miscellaneous § 905.26 Official logo and seal. This section describes and displays the logo adopted by the Board of Directors as the official...

  1. 12 CFR 905.26 - Official logo and seal.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 7 2011-01-01 2011-01-01 false Official logo and seal. 905.26 Section 905.26... OPERATIONS DESCRIPTION OF ORGANIZATION AND FUNCTIONS Miscellaneous § 905.26 Official logo and seal. This section describes and displays the logo adopted by the Board of Directors as the official...

  2. 49 CFR 192.187 - Vaults: Sealing, venting, and ventilation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Vaults: Sealing, venting, and ventilation. 192.187... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Design of Pipeline Components § 192.187 Vaults: Sealing, venting, and ventilation. Each underground vault or closed top...

  3. 50 CFR 223.201 - Guadalupe fur seal.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 10 2014-10-01 2014-10-01 false Guadalupe fur seal. 223.201 Section 223... Applicable to Threatened Marine and Anadromous Species § 223.201 Guadalupe fur seal. (a) Prohibitions. The prohibitions of section 9 of the Act (16 U.S.C. 1538) relating to endangered species apply to the Guadalupe...

  4. 7 CFR 58.731 - Closing and sealing containers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Closing and sealing containers. 58.731 Section 58.731... Procedures § 58.731 Closing and sealing containers. Pouches, liners, or containers having product contact... means, so as to assure against contamination. Each container in addition to other required...

  5. 27 CFR 72.68 - Sale on sealed, competitive bids.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Sale on sealed, competitive bids. 72.68 Section 72.68 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... PROPERTY Administrative Sale or Disposition of Personal Property § 72.68 Sale on sealed, competitive...

  6. 30 CFR 75.1711-1 - Sealing of shaft openings.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Sealing of shaft openings. 75.1711-1 Section 75... shaft openings. Shaft openings required to be sealed under § 75.1711 shall be effectively capped or filled. Filling shall be for the entire depth of the shaft and, for the first 50 feet from the bottom...

  7. 46 CFR 59.10-30 - Seal welding.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Seal welding. 59.10-30 Section 59.10-30 Shipping COAST... VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service § 59.10-30 Seal welding. Where leaks occur in riveted joints or connections, they shall be carefully investigated...

  8. 30 CFR 75.337 - Construction and repair of seals.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... quality control results to the District Manager for seal material properties specified by § 75.335 within 30 days of completion of quality control tests. (f) Welding, cutting, and soldering. Welding, cutting... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Construction and repair of seals....

  9. Resilient Braided Rope Seal

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M. (Inventor); Kren, Lawrence A. (Inventor)

    2000-01-01

    A resilient braided rope seal for use in high temperature applications includes a center core of fibers. a resilient canted spring member supporting the core and at least one layer of braided sheath fibers tightly packed together overlying the spring member. The seal provides both improved load bearing and resiliency. Permanent set and hysteresis are greatly reduced.

  10. Seal ring installation tool

    NASA Technical Reports Server (NTRS)

    Haselmaier, L. Haynes (Inventor)

    2004-01-01

    A seal ring tool that allows an installer to position a primary seal ring between hub ends of pipe flanges that are being assembled together. The tool includes a pivoting handle member and extension arms attached to the pivoting handle member. The ends of the arms have side indentation type longitudinal grooves angled toward one another for holding the primary seal ring in place between the hubs of respective pipes that are to be attached together. The arms of the tool can also have flat sides that can be used to abut against an optional second larger seal that is supported within a groove in one of the hub ends so that the second hub end can then be moved against the other side of the primary seal ring. Once the seal ring is positioned between the pipe hubs, the pipe hubs can be moved about the seal ring due to the flat sides of the arms of the tool. The tool eliminates the chances of damaging and contaminating seal rings being installed within pipe hubs that are being attached to one another.

  11. Pneumatic stowing seals mines

    SciTech Connect

    Brezovec, D.

    1983-11-01

    A pneumatic stowing technique has been used in the US to seal entries to abandoned mines. Limestone mixed with dry cement or bentonite is blown into the opening. Sealing can be accomplished in much less time than with traditional concrete block/clay plug methods.

  12. Seals and Scrolls.

    ERIC Educational Resources Information Center

    Macaulay, Sara Grove

    2000-01-01

    Describes an art unit in which students sculpt a signature seal out of clay and use Chinese brush painting techniques to paint a scroll. Discusses the seal and its historical use in China. Lists materials needed and explains the procedure. (CMK)

  13. Sodium sulfur battery seal

    DOEpatents

    Topouzian, Armenag

    1980-01-01

    This invention is directed to a seal for a sodium sulfur battery in which a flexible diaphragm sealing elements respectively engage opposite sides of a ceramic component of the battery which separates an anode compartment from a cathode compartment of the battery.

  14. Repository seals requirement study

    SciTech Connect

    1997-11-03

    The Yucca Mountain Site Characterization Project, managed by the Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M and O) is conducting investigations to support the Viability Assessment and the License Application for a high-level nuclear waste repository at Yucca Mountain, Nevada. The sealing subsystem is part of the Yucca Mountain Waste Isolation System. The Yucca Mountain Site Characterization Project is currently evaluating the role of the sealing subsystem (shaft, ramp and exploratory borehole seals) in achieving the overall performance objectives for the Waste Isolation System. This report documents the results of those evaluations. The objective of the study is to provide water or air flow performance based requirements for shafts, ramps, and exploratory boreholes located near the repository. Recommendations, as appropriate, are provided for developing plans, seals component testing, and other studies relating to sealing.

  15. Sealing in Turbomachinery

    NASA Technical Reports Server (NTRS)

    Chupp, Raymond E.; Hendricks, Robert C.; Lattime, Scott B.; Steinetz, Bruce M.

    2006-01-01

    Clearance control is of paramount importance to turbomachinery designers and is required to meet today's aggressive power output, efficiency, and operational life goals. Excessive clearances lead to losses in cycle efficiency, flow instabilities, and hot gas ingestion into disk cavities. Insufficient clearances limit coolant flows and cause interface rubbing, overheating downstream components and damaging interfaces, thus limiting component life. Designers have put renewed attention on clearance control, as it is often the most cost effective method to enhance system performance. Advanced concepts and proper material selection continue to play important roles in maintaining interface clearances to enable the system to meet design goals. This work presents an overview of turbomachinery sealing to control clearances. Areas covered include: characteristics of gas and steam turbine sealing applications and environments, benefits of sealing, types of standard static and dynamics seals, advanced seal designs, as well as life and limitations issues.

  16. Rotary shaft seal

    DOEpatents

    Langebrake, C.O.

    1984-01-01

    The invention is a novel rotary shaft seal assembly which provides positive-contact sealing when the shaft is not rotated and which operates with its sealing surfaces separated by a film of compressed ambient gas whose width is independent of the speed of shaft rotation. In a preferred embodiment, the assembly includes a disc affixed to the shaft for rotation therewith. Axially movable, non-rotatable plates respectively supported by sealing bellows are positioned on either side of the disc to be in sealing engagement therewith. Each plate carries piezoelectric transucer elements which are electrically energized at startup to produce films of compressed ambient gas between the confronting surfaces of the plates and the disc. Following shutdown of the shaft, the transducer elements are de-energized. A control circuit responds to incipient rubbing between the plate and either disc by altering the electrical input to the transducer elements to eliminate rubbing.

  17. Rotary shaft seal

    DOEpatents

    Langebrake, Clair O.

    1984-01-01

    The invention is a novel rotary shaft seal assembly which provides positive-contact sealing when the shaft is not rotated and which operates with its sealing surfaces separated by a film of compressed ambient gas whose width is independent of the speed of shaft rotation. In a preferred embodiment, the assembly includes a disc affixed to the shaft for rotation therewith. Axially movable, non-rotatable plates respectively supported by sealing bellows are positioned on either side of the disc to be in sealing engagement therewith. Each plate carries piezoelectric transducer elements which are electrically energized at startup to produce films of compressed ambient gas between the confronting surfaces of the plates and the disc. Following shutdown of the shaft, the transducer elements are de-energized. A control circuit responds to incipient rubbing between the plate and either disc by altering the electrical input to the transducer elements to eliminate rubbing.

  18. Transmission seal development

    NASA Technical Reports Server (NTRS)

    Brien, M.

    1977-01-01

    An experimental evaluation was performed on a high-speed (72.9 m/s, 14,349 ft/min) transmission seal of the synergistic type. During testing of the seal, oil leakage occurred at positive bearing cavity pressures. Modifications were made in an attempt to eliminate the leakage but none were completely successful. Leakage appears to be the result of questionable positioning of the sealing elements resulting in inadequate shaft contact by the oil side sealing element. This condition may be related to the nonsymmetrical shape of the elastomeric retainer and to dimensional changes caused by swelling of the elastomeric retainer from exposure to the sealed fluid. Indications of a speed dependent leakage characteristic were also observed.

  19. SSME interstage seal research

    NASA Technical Reports Server (NTRS)

    Childs, D. W.

    1984-01-01

    Test results comprising direct and transverse force coefficients and leakage coefficients are reported for six seal configurations. All seals tested use the same smooth rotor and have the same constant minimum clearance. The following stator configurations were tested: (1) Smooth, (2) knurled pattern, (3) axially-grooved pattern with end seals, (4) diamond-grid roughened, (5) diamond-grid roughened with end seals, and (6) round-hole pattern. Comparison of the seals shows the Knurled-pattern stator to be the stiffest and the round-hole pattern stator to yield the largest net damping and the least leakage. The theory of reference is shown to substantially underestimate the stiffness and effective-added-mass coefficients, but do a reasonable job in predicting the net-damping-force coefficient.

  20. 7 CFR 29.34 - Sample seal.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 2 2014-01-01 2014-01-01 false Sample seal. 29.34 Section 29.34 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS...

  1. 7 CFR 29.35 - Lot seal.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 2 2014-01-01 2014-01-01 false Lot seal. 29.35 Section 29.35 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS...

  2. 7 CFR 330.110 - Seals.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Seals. 330.110 Section 330.110 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

  3. 7 CFR 330.110 - Seals.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 5 2011-01-01 2011-01-01 false Seals. 330.110 Section 330.110 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

  4. 7 CFR 330.110 - Seals.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 5 2013-01-01 2013-01-01 false Seals. 330.110 Section 330.110 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

  5. 7 CFR 330.110 - Seals.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 5 2012-01-01 2012-01-01 false Seals. 330.110 Section 330.110 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

  6. 7 CFR 330.110 - Seals.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 5 2014-01-01 2014-01-01 false Seals. 330.110 Section 330.110 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

  7. 10 CFR 34.27 - Leak testing and replacement of sealed sources.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Leak testing and replacement of sealed sources. 34.27 Section 34.27 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION... of sealed sources. (a) The replacement of any sealed source fastened to or contained in...

  8. 36 CFR 1200.4 - How does NARA use its official seals?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false How does NARA use its official seals? 1200.4 Section 1200.4 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION GENERAL RULES OFFICIAL SEALS How are NARA's Official Seals and Logos Designed and Used? §...

  9. 36 CFR 1200.2 - How is each NARA seal designed?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false How is each NARA seal designed? 1200.2 Section 1200.2 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION GENERAL RULES OFFICIAL SEALS How are NARA's Official Seals and Logos Designed and Used? §...

  10. 9 CFR 325.16 - Official seals; forms, use, and breaking.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Official seals; forms, use, and... AND VOLUNTARY INSPECTION AND CERTIFICATION TRANSPORTATION § 325.16 Official seals; forms, use, and breaking. (a) The official seals required by this part shall be those prescribed in § 312.5(a) of...

  11. 46 CFR 196.30-20 - Breaking of safety valve seal.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Breaking of safety valve seal. 196.30-20 Section 196.30... OPERATIONS Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-20 Breaking of safety valve seal. (a) If at any time it is necessary to break the seal on a safety valve for any purpose, the...

  12. 9 CFR 325.16 - Official seals; forms, use, and breaking.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Official seals; forms, use, and... AND VOLUNTARY INSPECTION AND CERTIFICATION TRANSPORTATION § 325.16 Official seals; forms, use, and breaking. (a) The official seals required by this part shall be those prescribed in § 312.5(a) of...

  13. 10 CFR 1002.3 - Custody of official seal and distinguishing flags.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Custody of official seal and distinguishing flags. 1002.3 Section 1002.3 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG General § 1002.3 Custody of official seal and distinguishing flags. The Secretary or his designee...

  14. 9 CFR 312.5 - Official seals for transportation of products.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Official seals for transportation of... INSPECTION AND CERTIFICATION OFFICIAL MARKS, DEVICES AND CERTIFICATES § 312.5 Official seals for... and any seal approved by the Administrator for applying such mark shall be an official device...

  15. 10 CFR 1002.3 - Custody of official seal and distinguishing flags.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Custody of official seal and distinguishing flags. 1002.3 Section 1002.3 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG General § 1002.3 Custody of official seal and distinguishing flags. The Secretary or his designee...

  16. 9 CFR 325.16 - Official seals; forms, use, and breaking.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Official seals; forms, use, and... AND VOLUNTARY INSPECTION AND CERTIFICATION TRANSPORTATION § 325.16 Official seals; forms, use, and breaking. (a) The official seals required by this part shall be those prescribed in § 312.5(a) of...

  17. 9 CFR 312.5 - Official seals for transportation of products.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Official seals for transportation of... INSPECTION AND CERTIFICATION OFFICIAL MARKS, DEVICES AND CERTIFICATES § 312.5 Official seals for... and any seal approved by the Administrator for applying such mark shall be an official device...

  18. 46 CFR 196.30-20 - Breaking of safety valve seal.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Breaking of safety valve seal. 196.30-20 Section 196.30... OPERATIONS Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-20 Breaking of safety valve seal. (a) If at any time it is necessary to break the seal on a safety valve for any purpose, the...

  19. 9 CFR 325.16 - Official seals; forms, use, and breaking.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Official seals; forms, use, and... AND VOLUNTARY INSPECTION AND CERTIFICATION TRANSPORTATION § 325.16 Official seals; forms, use, and breaking. (a) The official seals required by this part shall be those prescribed in § 312.5(a) of...

  20. 13 CFR 101.105 - Who may use SBA's official seal and for what purpose?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Who may use SBA's official seal... ADMINISTRATION ADMINISTRATION Overview § 101.105 Who may use SBA's official seal and for what purpose? (a) General. This section describes the official seal of the SBA and prescribes rules for its use....

  1. 29 CFR 2200.108 - Official Seal of the Occupational Safety and Health Review Commission.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 9 2012-07-01 2012-07-01 false Official Seal of the Occupational Safety and Health Review... HEALTH REVIEW COMMISSION RULES OF PROCEDURE Miscellaneous Provisions § 2200.108 Official Seal of the Occupational Safety and Health Review Commission. The seal of the Commission shall consist of: A gold...

  2. 46 CFR 196.30-20 - Breaking of safety valve seal.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Breaking of safety valve seal. 196.30-20 Section 196.30... OPERATIONS Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-20 Breaking of safety valve seal. (a) If at any time it is necessary to break the seal on a safety valve for any purpose, the...

  3. 9 CFR 312.5 - Official seals for transportation of products.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Official seals for transportation of... INSPECTION AND CERTIFICATION OFFICIAL MARKS, DEVICES AND CERTIFICATES § 312.5 Official seals for... and any seal approved by the Administrator for applying such mark shall be an official device...

  4. 10 CFR 1002.3 - Custody of official seal and distinguishing flags.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Custody of official seal and distinguishing flags. 1002.3 Section 1002.3 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG General § 1002.3 Custody of official seal and distinguishing flags. The Secretary or his designee...

  5. 46 CFR 196.30-20 - Breaking of safety valve seal.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Breaking of safety valve seal. 196.30-20 Section 196.30... OPERATIONS Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-20 Breaking of safety valve seal. (a) If at any time it is necessary to break the seal on a safety valve for any purpose, the...

  6. 9 CFR 312.5 - Official seals for transportation of products.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Official seals for transportation of... INSPECTION AND CERTIFICATION OFFICIAL MARKS, DEVICES AND CERTIFICATES § 312.5 Official seals for... and any seal approved by the Administrator for applying such mark shall be an official device...

  7. 29 CFR 2200.108 - Official Seal of the Occupational Safety and Health Review Commission.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 9 2014-07-01 2014-07-01 false Official Seal of the Occupational Safety and Health Review... HEALTH REVIEW COMMISSION RULES OF PROCEDURE Miscellaneous Provisions § 2200.108 Official Seal of the Occupational Safety and Health Review Commission. The seal of the Commission shall consist of: A gold...

  8. 29 CFR 2200.108 - Official Seal of the Occupational Safety and Health Review Commission.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 9 2013-07-01 2013-07-01 false Official Seal of the Occupational Safety and Health Review... HEALTH REVIEW COMMISSION RULES OF PROCEDURE Miscellaneous Provisions § 2200.108 Official Seal of the Occupational Safety and Health Review Commission. The seal of the Commission shall consist of: A gold...

  9. 46 CFR 196.30-20 - Breaking of safety valve seal.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Breaking of safety valve seal. 196.30-20 Section 196.30... OPERATIONS Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-20 Breaking of safety valve seal. (a) If at any time it is necessary to break the seal on a safety valve for any purpose, the...

  10. 9 CFR 312.5 - Official seals for transportation of products.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Official seals for transportation of... INSPECTION AND CERTIFICATION OFFICIAL MARKS, DEVICES AND CERTIFICATES § 312.5 Official seals for... and any seal approved by the Administrator for applying such mark shall be an official device...

  11. 10 CFR 1002.3 - Custody of official seal and distinguishing flags.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Custody of official seal and distinguishing flags. 1002.3 Section 1002.3 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG General § 1002.3 Custody of official seal and distinguishing flags. The Secretary or his designee...

  12. 10 CFR 1002.3 - Custody of official seal and distinguishing flags.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Custody of official seal and distinguishing flags. 1002.3 Section 1002.3 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG General § 1002.3 Custody of official seal and distinguishing flags. The Secretary or his designee...

  13. 9 CFR 325.16 - Official seals; forms, use, and breaking.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Official seals; forms, use, and... AND VOLUNTARY INSPECTION AND CERTIFICATION TRANSPORTATION § 325.16 Official seals; forms, use, and breaking. (a) The official seals required by this part shall be those prescribed in § 312.5(a) of...

  14. 10 CFR 34.63 - Records of receipt and transfer of sealed sources.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Records of receipt and transfer of sealed sources. 34.63... receipt and transfer of sealed sources. (a) Each licensee shall maintain records showing the receipts and transfers of sealed sources and devices using DU for shielding and retain each record for 3 years after...

  15. 10 CFR 35.590 - Training for use of sealed sources for diagnosis.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Training for use of sealed sources for diagnosis. 35.590 Section 35.590 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Sealed Sources for Diagnosis § 35.590 Training for use of sealed sources for diagnosis. Except as provided in § 35.57,...

  16. 10 CFR 35.590 - Training for use of sealed sources for diagnosis.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Training for use of sealed sources for diagnosis. 35.590 Section 35.590 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Sealed Sources for Diagnosis § 35.590 Training for use of sealed sources for diagnosis. Except as provided in § 35.57,...

  17. 10 CFR 35.590 - Training for use of sealed sources for diagnosis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Training for use of sealed sources for diagnosis. 35.590 Section 35.590 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Sealed Sources for Diagnosis § 35.590 Training for use of sealed sources for diagnosis. Except as provided in § 35.57,...

  18. 50 CFR 226.201 - Critical habitat for Hawaiian monk seals.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Critical habitat for Hawaiian monk seals... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS DESIGNATED CRITICAL HABITAT § 226.201 Critical habitat for Hawaiian monk seals. Hawaiian Monk Seal (Monachus schauinslandi) All beach areas,...

  19. 50 CFR 226.201 - Critical habitat for Hawaiian monk seals.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 10 2014-10-01 2014-10-01 false Critical habitat for Hawaiian monk seals... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS DESIGNATED CRITICAL HABITAT § 226.201 Critical habitat for Hawaiian monk seals. Hawaiian Monk Seal (Monachus schauinslandi) All beach areas,...

  20. 50 CFR 226.201 - Critical habitat for Hawaiian monk seals.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 10 2013-10-01 2013-10-01 false Critical habitat for Hawaiian monk seals... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS DESIGNATED CRITICAL HABITAT § 226.201 Critical habitat for Hawaiian monk seals. Hawaiian Monk Seal (Monachus schauinslandi) All beach areas,...

  1. 19 CFR 122.186 - Presentation of Customs access seal by other person.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Presentation of Customs access seal by other person. 122.186 Section 122.186 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... Presentation of Customs access seal by other person. If an approved Customs access seal is presented by...

  2. 25 CFR 307.5 - Hand seal press and certificates to be furnished.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Hand seal press and certificates to be furnished. 307.5... FABRICS; USE OF GOVERNMENT CERTIFICATE OF GENUINENESS § 307.5 Hand seal press and certificates to be... § 307.6 one hand seal press and a supply of blank Government certificates, which shall be used only...

  3. 25 CFR 307.5 - Hand seal press and certificates to be furnished.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Hand seal press and certificates to be furnished. 307.5... FABRICS; USE OF GOVERNMENT CERTIFICATE OF GENUINENESS § 307.5 Hand seal press and certificates to be... § 307.6 one hand seal press and a supply of blank Government certificates, which shall be used only...

  4. 25 CFR 307.5 - Hand seal press and certificates to be furnished.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Hand seal press and certificates to be furnished. 307.5... FABRICS; USE OF GOVERNMENT CERTIFICATE OF GENUINENESS § 307.5 Hand seal press and certificates to be... § 307.6 one hand seal press and a supply of blank Government certificates, which shall be used only...

  5. 25 CFR 307.5 - Hand seal press and certificates to be furnished.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Hand seal press and certificates to be furnished. 307.5... FABRICS; USE OF GOVERNMENT CERTIFICATE OF GENUINENESS § 307.5 Hand seal press and certificates to be... § 307.6 one hand seal press and a supply of blank Government certificates, which shall be used only...

  6. 25 CFR 307.5 - Hand seal press and certificates to be furnished.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Hand seal press and certificates to be furnished. 307.5... FABRICS; USE OF GOVERNMENT CERTIFICATE OF GENUINENESS § 307.5 Hand seal press and certificates to be... § 307.6 one hand seal press and a supply of blank Government certificates, which shall be used only...

  7. 14 CFR § 1221.109 - Use of the NASA Seal.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Use of the NASA Seal. § 1221.109 Section § 1221.109 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION THE NASA SEAL AND OTHER DEVICES, AND THE CONGRESSIONAL SPACE MEDAL OF HONOR NASA Seal, NASA Insignia, NASA Logotype, NASA...

  8. 14 CFR § 1221.102 - Establishment of the NASA Seal.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Establishment of the NASA Seal. § 1221.102 Section § 1221.102 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION THE NASA SEAL AND OTHER DEVICES, AND THE CONGRESSIONAL SPACE MEDAL OF HONOR NASA Seal, NASA Insignia, NASA Logotype,...

  9. HSCT Anticipated Seal Needs Turbomachinery Seals Combustor Seals

    NASA Technical Reports Server (NTRS)

    Henry, John

    2006-01-01

    The High Speed Civil Transport (HSCT) engine concept is a large mixed flow turbofan similar in construction to current military fighter engines. The mission, however, is quite different. The engine will operate for long periods of time at very high Mach numbers and high altitudes. The engine is required to have very low emissions and noise levels to be acceptable in commercial service. Current thrust levels are in the 55000 lb range. At the current supercruise speed requirement of Mach 2.4, the engine inlet temperature will be at least 380 F. This is the lowest cycle temperature expected anywhere in the propulsion system.Seals will be exposed to operate at this temperature and higher for thousands of hours without failure. Durability, cost, and weight will all be very important in determining the type of seals selected for a successful HSCT engine.

  10. Seals Flow Code Development 1993

    NASA Technical Reports Server (NTRS)

    Liang, Anita D. (Compiler); Hendricks, Robert C. (Compiler)

    1994-01-01

    Seals Workshop of 1993 code releases include SPIRALI for spiral grooved cylindrical and face seal configurations; IFACE for face seals with pockets, steps, tapers, turbulence, and cavitation; GFACE for gas face seals with 'lift pad' configurations; and SCISEAL, a CFD code for research and design of seals of cylindrical configuration. GUI (graphical user interface) and code usage was discussed with hands on usage of the codes, discussions, comparisons, and industry feedback. Other highlights for the Seals Workshop-93 include environmental and customer driven seal requirements; 'what's coming'; and brush seal developments including flow visualization, numerical analysis, bench testing, T-700 engine testing, tribological pairing and ceramic configurations, and cryogenic and hot gas facility brush seal results. Also discussed are seals for hypersonic engines and dynamic results for spiral groove and smooth annular seals.

  11. Reactor cavity seal ring

    SciTech Connect

    Hankinson, M.F.

    1986-04-22

    A hydrostatic seal is described for sealing an annular gap between two flat substantially horizontal coplanar surfaces comprising, in combination: a generally flat annular plate of a width sufficient to span a gap between two surfaces: compressible annular sealing means disposed on the bottom surface of the flat annular plate for sealingly engaging the two flat surfaces in response to a downward force exerted on the plate; and fastening means, distributed along the center line of the plate, for releasably fastening the plate in a position to span the gap to be sealed and exert a downward force on the plate, each fastening means including a pair of elongated members of a size to fit into the gap to be sealed, means for mounting the members on the bottom surface of the plate so that at least a portion of each member is radially moveable in a direction toward a respective one of the vertical side surfaces defining the gap to be sealed to engage same and so that the plate is moveable relative to the members in a downward direction in response to hydrostatic pressure applied to the upper surface of the plate when the members are engaging the vertical side surfaces of an annular gap, and an actuating means, mounted on the plate for movement therewith in response to hydrostatic pressure, for radially moving the members, the actuating means extending through a bore in the plate to the upper surface of the plate.

  12. 19 CFR 12.63 - Seal-skin or sea-otter-skin waste.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Seal-skin or sea-otter-skin waste. 12.63 Section... OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.63 Seal-skin or sea-otter-skin waste. Seal-skin or sea-otter-skin waste composed of small pieces not large enough to...

  13. 19 CFR 12.63 - Seal-skin or sea-otter-skin waste.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Seal-skin or sea-otter-skin waste. 12.63 Section... OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.63 Seal-skin or sea-otter-skin waste. Seal-skin or sea-otter-skin waste composed of small pieces not large enough to...

  14. 19 CFR 12.63 - Seal-skin or sea-otter-skin waste.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Seal-skin or sea-otter-skin waste. 12.63 Section... OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.63 Seal-skin or sea-otter-skin waste. Seal-skin or sea-otter-skin waste composed of small pieces not large enough to...

  15. 19 CFR 12.61 - Fur-seal or sea-otter skins permitted entry.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Fur-seal or sea-otter skins permitted entry. 12.61...; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.61 Fur-seal or sea-otter skins permitted entry. (a) Fur-seal or sea-otter skins taken by Indians, Aleuts, or...

  16. 19 CFR 12.61 - Fur-seal or sea-otter skins permitted entry.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Fur-seal or sea-otter skins permitted entry. 12.61...; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.61 Fur-seal or sea-otter skins permitted entry. (a) Fur-seal or sea-otter skins taken by Indians, Aleuts, or...

  17. 19 CFR 12.63 - Seal-skin or sea-otter-skin waste.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Seal-skin or sea-otter-skin waste. 12.63 Section... OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.63 Seal-skin or sea-otter-skin waste. Seal-skin or sea-otter-skin waste composed of small pieces not large enough to...

  18. 19 CFR 12.61 - Fur-seal or sea-otter skins permitted entry.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Fur-seal or sea-otter skins permitted entry. 12.61...; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.61 Fur-seal or sea-otter skins permitted entry. (a) Fur-seal or sea-otter skins taken by Indians, Aleuts, or...

  19. 19 CFR 12.61 - Fur-seal or sea-otter skins permitted entry.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Fur-seal or sea-otter skins permitted entry. 12.61...; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.61 Fur-seal or sea-otter skins permitted entry. (a) Fur-seal or sea-otter skins taken by Indians, Aleuts, or...

  20. 19 CFR 12.61 - Fur-seal or sea-otter skins permitted entry.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Fur-seal or sea-otter skins permitted entry. 12.61...; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.61 Fur-seal or sea-otter skins permitted entry. (a) Fur-seal or sea-otter skins taken by Indians, Aleuts, or...

  1. 19 CFR 12.63 - Seal-skin or sea-otter-skin waste.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Seal-skin or sea-otter-skin waste. 12.63 Section... OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.63 Seal-skin or sea-otter-skin waste. Seal-skin or sea-otter-skin waste composed of small pieces not large enough to...

  2. Sealing device for providing a seal in a turbomachine

    DOEpatents

    Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Porter, Christopher Donald; Schick, David Edward; Weber, David Wayne

    2016-08-16

    Sealing device for providing seals between adjacent components, and turbomachines utilizing such sealing devices, are provided. A sealing device includes a seal plate insertable between the adjacent components, the seal plate comprising a first face and an opposing second face. The sealing device further includes a plurality of pins extending from one of the first face or the second face, the plurality of pins configured to space the one of the first face or the second face from contact surfaces of the adjacent components.

  3. Multilayer compressive seal for sealing in high temperature devices

    DOEpatents

    Chou, Yeong-Shyung; Stevenson, Jeffry W.

    2007-08-21

    A mica based compressive seal has been developed exhibiting superior thermal cycle stability when compared to other compressive seals known in the art. The seal is composed of compliant glass or metal interlayers and a sealing (gasket) member layer composed of mica that is infiltrated with a glass forming material, which effectively reduces leaks within the seal. The compressive seal shows approximately a 100-fold reduction in leak rates compared with previously developed hybrid seals after from 10 to about 40 thermal cycles under a compressive stress of from 50 psi to 100 psi at temperatures in the range from 600.degree. C. to about 850.degree. C.

  4. Bellow seal and anchor

    DOEpatents

    Mansure, Arthur J.

    2001-01-01

    An annular seal is made of a collapsible bellows. The bellows can function as an anchor or a seal and is easily set into position using relative component movement. The bellows folds can be slanted and their outer sealing edges can have different profiles to meet expected conditions. The bellows is expanded for insertion to reduce its outer dimension and sets by compaction as a result of relative movement. The bellows can be straight or tapered and is settable with a minimal axial force.

  5. Gland With Cantilever Seal

    NASA Technical Reports Server (NTRS)

    Melton, Patrick B.

    1989-01-01

    Single-piece gland forms tight seal on probe or tube containing liquid or gas at high pressure. Gland and probe align as assembled by simple torquing procedure. Disconnected easily and reused at same site. Made from any of wide variety of materials so compatible with application. Cantilever ring at top of gland bites into wall of tube or probe, sealing it. Wall of tube or probe must be thick enough to accommodate deformation without rupturing. Maximum deformation designed in coordination with seating and deformation of boss or conical seal.

  6. SEALING SIMULATED LEAKS

    SciTech Connect

    Michael A. Romano

    2004-09-01

    This report details the testing equipment, procedures and results performed under Task 7.2 Sealing Simulated Leaks. In terms of our ability to seal leaks identified in the technical topical report, Analysis of Current Field Data, we were 100% successful. In regards to maintaining seal integrity after pigging operations we achieved varying degrees of success. Internal Corrosion defects proved to be the most resistant to the effects of pigging while External Corrosion proved to be the least resistant. Overall, with limitations, pressure activated sealant technology would be a viable option under the right circumstances.

  7. Engine sealing and lubrication systems

    NASA Technical Reports Server (NTRS)

    Zuk, J.

    1975-01-01

    Engine sealing programs are discussed which are directed toward the two major classes of engine seals: engine shaft seals and primary gas path seals. In addition, some concepts and results from fundamental lubrication research, as it pertains to the lubrication of bearings, are presented.

  8. Tamper indicating seal

    DOEpatents

    Romero, Juan A [Albuquerque, NM; Walker, Charles A [Albuquerque, NM; Blair, Dianna S [Albuquerque, NM; Bodmer, Connie C [Albuquerque, NM

    2012-05-29

    Seals have a flexible wire that can be looped through a hasp-like device. The seals include a body having a recess, a plug insertable into the recess and a snap ring for fastening the plug to the body. The plug and/or body can have access holes for inserting the wire into the recess. "Teeth" on the outer diameter and through-holes through the thickness of the snap ring allow for passing the ends of the flexible wire from the recess through the snap ring. The ends of the wire can be folded back over the snap ring and into engagement with the teeth. Assembly of the seal causes the ends of the wire to be securely fastened between the teeth of the snap ring and the sidewall of the recess. Seals can include a plug and/or body made of a frangible material such as glass, ceramic, glass-ceramic or brittle polymer.

  9. Gas turbine sealing apparatus

    SciTech Connect

    Marra, John Joseph; Wessell, Brian J.; Liang, George

    2013-03-05

    A sealing apparatus in a gas turbine. The sealing apparatus includes a seal housing apparatus coupled to a disc/rotor assembly so as to be rotatable therewith during operation of the gas turbine. The seal housing apparatus comprises a base member, a first leg portion, a second leg portion, and spanning structure. The base member extends generally axially between forward and aft rows of rotatable blades and is positioned adjacent to a row of stationary vanes. The first leg portion extends radially inwardly from the base member and is coupled to the disc/rotor assembly. The second leg portion is axially spaced from the first leg portion, extends radially inwardly from the base member, and is coupled to the disc/rotor assembly. The spanning structure extends between and is rigidly coupled to each of the base member, the first leg portion, and the second leg portion.

  10. Flexible cloth seal assembly

    DOEpatents

    Bagepalli, B.S.; Taura, J.C.; Aksit, M.F.; Demiroglu, M.; Predmore, D.R.

    1999-06-29

    A seal assembly is described having a flexible cloth seal which includes a shim assemblage surrounded by a cloth assemblage. A first tubular end portion, such as a gas turbine combustor, includes a longitudinal axis and has smooth and spaced-apart first and second surface portions defining a notch there between which is wider at its top than at its bottom and which extends outward from the axis. The second surface portion is outside curved, and a first edge of the cloth seal is positioned in the bottom of the notch. A second tubular end portion, such as a first stage nozzle, is located near, spaced apart from, and coaxially aligned with, the first tubular end portion. The second tubular end portion has a smooth third surface portion which surrounds at least a portion of the first tubular end portion and which is contacted by the cloth seal. 7 figs.

  11. Rotatable seal assembly

    DOEpatents

    Logan, Clinton M.; Garibaldi, Jack L.

    1982-01-01

    An assembly is provided for rotatably supporting a rotor on a stator so that vacuum chambers in the rotor and stator remain in communication while the chambers are sealed from ambient air, which enables the use of a ball bearing or the like to support most of the weight of the rotor. The apparatus includes a seal device mounted on the rotor to rotate therewith, but shiftable in position on the rotor while being sealed to the rotor as by an O-ring. The seal device has a flat face that is biased towards a flat face on the stator, and pressurized air is pumped between the faces to prevent contact between them while spacing them a small distance apart to avoid the inflow of large amounts of air between the faces and into the vacuum chambers.

  12. Flexible cloth seal assembly

    DOEpatents

    Bagepalli, Bharat Sampathkumar; Taura, Joseph Charles; Aksit, Mahmut Faruk; Demiroglu, Mehmet; Predmore, Daniel Ross

    1999-01-01

    A seal assembly having a flexible cloth seal which includes a shim assemblage surrounded by a cloth assemblage. A first tubular end portion, such as a gas turbine combustor, includes a longitudinal axis and has smooth and spaced-apart first and second surface portions defining a notch therebetween which is wider at its top than at its bottom and which extends outward from the axis. The second surface portion is outside curved, and a first edge of the cloth seal is positioned in the bottom of the notch. A second tubular end portion, such as a first stage nozzle, is located near, spaced apart from, and coaxially aligned with, the first tubular end portion. The second tubular end portion has a smooth third surface portion which surrounds at least a portion of the first tubular end portion and which is contacted by the cloth seal.

  13. Turbine seal assembly

    SciTech Connect

    Little, David A.

    2013-04-16

    A seal assembly that limits gas leakage from a hot gas path to one or more disc cavities in a turbine engine. The seal assembly includes a seal apparatus that limits gas leakage from the hot gas path to a respective one of the disc cavities. The seal apparatus comprises a plurality of blade members rotatable with a blade structure. The blade members are associated with the blade structure and extend toward adjacent stationary components. Each blade member includes a leading edge and a trailing edge, the leading edge of each blade member being located circumferentially in front of the blade member's corresponding trailing edge in a direction of rotation of the turbine rotor. The blade members are arranged such that a space having a component in a circumferential direction is defined between adjacent circumferentially spaced blade members.

  14. Ingestion resistant seal assembly

    SciTech Connect

    Little, David A

    2011-12-13

    A seal assembly limits gas leakage from a hot gas path to one or more disc cavities in a gas turbine engine. The seal assembly includes a seal apparatus associated with a blade structure including a row of airfoils. The seal apparatus includes an annular inner shroud associated with adjacent stationary components, a wing member, and a first wing flange. The wing member extends axially from the blade structure toward the annular inner shroud. The first wing flange extends radially outwardly from the wing member toward the annular inner shroud. A plurality of regions including one or more recirculation zones are defined between the blade structure and the annular inner shroud that recirculate working gas therein back toward the hot gas path.

  15. Conduit sealing system

    SciTech Connect

    Weinberg, R.A.

    1984-02-28

    The invention relates to an annular seal system designed for high pressure applications in subterranean wells. The annular seal system comprises a vertical stack of subassemblies. Each subassembly incorporates an annular sealing element formed from an elastomeric material, such as a perfluoroelastomer, which is provided with a truncated pear-shaped cross-sectional configuration having reversely curved axial side surfaces. The sealing element is abutted on each axial side by a uniform thickness annular bearing element formed from a thermoplastic such as a polyphenylene sulfide resin having good bearing properties. Each of the thermoplastic bearing elements is in turn abutted by an annular metallic restraining element having correspondingly shaped reversely curved axial side surfaces and defining an inverted truncated pear-shaped cross-sectional configuration.

  16. Current developments in brush seals

    NASA Technical Reports Server (NTRS)

    Loewenthal, Bob

    1994-01-01

    The objective of the brush seal development program is to develop a comprehensive design methodology for brush seals using application requirements from engine manufacturers and experimental characterization of seal design and tribological pairs. The goals are to substantially lower leakage compared to labyrinth seals, seal life consistent with man-rated mission requirements, to investigate single and multiple staged brush seals, temperature up to 1200 F and surface speed up to 900 fps, and pressure drop across the seal of 50 psid. Test results are presented in viewgraph format.

  17. Ultra high vacuum seal arrangement

    DOEpatents

    Flaherty, Robert

    1981-01-01

    Arrangement for demountably sealing two concentric metallic tubes in an ultra high vacuum system which facilitates remote actuation. A tubular seal includes integral spaced lips which circumferentially engage the metallic tubes. The lips plastically deform the metallic tubes by mechanical forces resulting from a martensite to austenite transformation of the tubular seal upon application of a predetermined temperature. The sealing force is released upon application of another temperature which causes a transformation from the stronger austenite to the weaker martensite. Use of a dual acting sealing ring and driving ring circumferentially contacting the sealing ring is particularly applicable to sealing larger diameter concentric metallic members.

  18. Seal system with integral detector

    DOEpatents

    Fiarman, S.

    1982-08-12

    A seal system is disclosed for materials where security is of the essence, such as nuclear materials. The seal is tamper-indicating, indicates changes in environmental conditions that evidence attempts to bypass the seal, is unique and cost effective. The seal system is comprised of a seal where an optical signal is transmitted through a loop, with a detector to read said signal, and one or more additional detectors designed to detect environmental changes, these detectors being operatively associated with the seal so that detection of a break in the optical signal or detection of environmental changes will cause an observable change in the seal.

  19. Self-acting shaft seals

    NASA Technical Reports Server (NTRS)

    Ludwig, L. P.

    1978-01-01

    Self-acting seals are described in detail. The mathematical models for obtaining a seal force balance and the equilibrium operating film thickness are outlined. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis reveals three different vibration models with secondary seal friction being an important parameter. Leakage flow inlet pressure drop and affects of axisymmetric sealing face deformations are discussed. Experimental data on self-acting face seals operating under simulated gas turbine conditions are given. Also a spiral groove seal design operated to 244 m/sec (800 ft/sec) is described.

  20. Core disruptive accident margin seal

    DOEpatents

    Golden, Martin P.

    1979-01-01

    Apparatus for sealing the annulus defined within a substantially cylindrical rotatable riser assembly and plug combination of a nuclear reactor closure head. The apparatus comprises an inflatable sealing mechanism disposed in one portion of the riser assembly near the annulus such that upon inflation the sealing mechanism is radially actuated against the other portion of the riser assembly thereby sealing the annulus. The apparatus further comprises a connecting mechanism which places one end of the sealing mechanism in fluid communication with the reactor cover gas so that overpressurization of the reactor cover gas will increase the radial actuation of the sealing mechanism thus enhancing sealing of the annulus.