Science.gov

Sample records for 2011-10-01 false inert

  1. 46 CFR 153.923 - Inerting systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Inerting systems. 153.923 Section 153.923 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK... Requirements § 153.923 Inerting systems. The master shall ensure that the inert gas systems for any cargo...

  2. 46 CFR 154.904 - Inert gas system: Controls.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Inert gas system: Controls. 154.904 Section 154.904... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Atmospheric Control in Cargo Containment Systems § 154.904 Inert gas system: Controls. The inert gas...

  3. 46 CFR 154.910 - Inert gas piping: Location.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Inert gas piping: Location. 154.910 Section 154.910... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Atmospheric Control in Cargo Containment Systems § 154.910 Inert gas piping: Location. Inert gas piping...

  4. 46 CFR 154.906 - Inert gas generators.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Inert gas generators. 154.906 Section 154.906 Shipping... Atmospheric Control in Cargo Containment Systems § 154.906 Inert gas generators. The inert gas generator must... sample the discharge of the generator for oxygen content; and (c) Have an audible and visual alarm in...

  5. 46 CFR 154.908 - Inert gas generator: Location.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Inert gas generator: Location. 154.908 Section 154.908... Atmospheric Control in Cargo Containment Systems § 154.908 Inert gas generator: Location. (a) Except as allowed in paragraph (b) of this section, an inert gas generator must be located in the main...

  6. 46 CFR 154.912 - Inerted spaces: Relief devices.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Inerted spaces: Relief devices. 154.912 Section 154.912 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Atmospheric Control in Cargo Containment Systems § 154.912 Inerted spaces: Relief devices. Inerted spaces...

  7. 46 CFR 153.462 - Static discharges from inert gas systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Static discharges from inert gas systems. 153.462... Equipment Special Requirements for Flammable Or Combustible Cargoes § 153.462 Static discharges from inert... create static arcing as the inert gas is injected into the tank....

  8. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  9. 46 CFR 153.500 - Inert gas systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Inert gas systems. 153.500 Section 153.500 Shipping... BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Special Requirements § 153.500 Inert gas systems. When Table 1 refers to this section, a cargo containment system...

  10. 47 CFR 80.334 - False distress alerts.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false False distress alerts. 80.334 Section 80.334... § 80.334 False distress alerts. A distress alert is false if it was transmitted without any indication... distress alert is prohibited and may be subject to the provisions of part 1, subpart A of this chapter...

  11. 47 CFR 80.1114 - False distress alerts.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false False distress alerts. 80.1114 Section 80.1114... Safety Communications § 80.1114 False distress alerts. The provisions of §§ 80.334 and 80.335 apply to false distress alerts....

  12. 42 CFR 21.23 - False statements as disqualification.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false False statements as disqualification. 21.23 Section... COMMISSIONED OFFICERS Appointment § 21.23 False statements as disqualification. Willfully false statements shall be cause for rejection of the application or, as provided in subpart N of this part, for dismissal....

  13. 42 CFR 1001.901 - False or improper claims.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false False or improper claims. 1001.901 Section 1001.901 Public Health OFFICE OF INSPECTOR GENERAL-HEALTH CARE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OIG AUTHORITIES PROGRAM INTEGRITY-MEDICARE AND STATE HEALTH CARE PROGRAMS Permissive Exclusions § 1001.901...

  14. 45 CFR 3.4 - False reports and reports of injury or damage.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 1 2011-10-01 2011-10-01 false False reports and reports of injury or damage. 3.4 Section 3.4 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CONDUCT OF PERSONS AND TRAFFIC ON THE NATIONAL INSTITUTES OF HEALTH FEDERAL ENCLAVE General § 3.4 False reports...

  15. 47 CFR 80.335 - Procedures for canceling false distress alerts.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Procedures for canceling false distress alerts..., Alarm, Urgency and Safety Procedures § 80.335 Procedures for canceling false distress alerts. If a distress alert is inadvertently transmitted, the following steps shall be taken to cancel the...

  16. 47 CFR 11.45 - Prohibition of false or deceptive EAS transmissions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Prohibition of false or deceptive EAS transmissions. 11.45 Section 11.45 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL EMERGENCY ALERT SYSTEM (EAS) Organization § 11.45 Prohibition of false or deceptive EAS transmissions. No person...

  17. 43 CFR 20.510 - Fraud or false statements in a Government matter.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false Fraud or false statements in a Government matter. 20.510 Section 20.510 Public Lands: Interior Office of the Secretary of the Interior EMPLOYEE RESPONSIBILITIES AND CONDUCT Other Employee Conduct Provisions § 20.510 Fraud or false statements in a...

  18. 45 CFR 1182.18 - Penalties for obtaining an Institute record under false pretenses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 3 2011-10-01 2011-10-01 false Penalties for obtaining an Institute record under false pretenses. 1182.18 Section 1182.18 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES INSTITUTE OF MUSEUM AND LIBRARY...

  19. 7 CFR 201.51 - Inert matter.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Inert matter. 201.51 Section 201.51 Agriculture... REGULATIONS Purity Analysis in the Administration of the Act § 201.51 Inert matter. Inert matter shall include.... Also included as inert matter are separated cotyledons of legumes, irrespective of whether or not...

  20. 7 CFR 201.51 - Inert matter.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Inert matter. 201.51 Section 201.51 Agriculture... REGULATIONS Purity Analysis in the Administration of the Act § 201.51 Inert matter. Inert matter shall include.... Also included as inert matter are separated cotyledons of legumes, irrespective of whether or not...

  1. 7 CFR 201.51 - Inert matter.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Inert matter. 201.51 Section 201.51 Agriculture... REGULATIONS Purity Analysis in the Administration of the Act § 201.51 Inert matter. Inert matter shall include.... Also included as inert matter are separated cotyledons of legumes, irrespective of whether or not...

  2. 7 CFR 201.51 - Inert matter.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Inert matter. 201.51 Section 201.51 Agriculture... REGULATIONS Purity Analysis in the Administration of the Act § 201.51 Inert matter. Inert matter shall include.... Also included as inert matter are separated cotyledons of legumes, irrespective of whether or not...

  3. 7 CFR 201.19 - Inert matter.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Inert matter. 201.19 Section 201.19 Agriculture... REGULATIONS Labeling Agricultural Seeds § 201.19 Inert matter. The label shall show the percentage by weight of inert matter....

  4. 7 CFR 201.19 - Inert matter.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Inert matter. 201.19 Section 201.19 Agriculture... REGULATIONS Labeling Agricultural Seeds § 201.19 Inert matter. The label shall show the percentage by weight of inert matter....

  5. 7 CFR 201.19 - Inert matter.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Inert matter. 201.19 Section 201.19 Agriculture... REGULATIONS Labeling Agricultural Seeds § 201.19 Inert matter. The label shall show the percentage by weight of inert matter....

  6. 7 CFR 201.19 - Inert matter.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Inert matter. 201.19 Section 201.19 Agriculture... REGULATIONS Labeling Agricultural Seeds § 201.19 Inert matter. The label shall show the percentage by weight of inert matter....

  7. 7 CFR 201.19 - Inert matter.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Inert matter. 201.19 Section 201.19 Agriculture... REGULATIONS Labeling Agricultural Seeds § 201.19 Inert matter. The label shall show the percentage by weight of inert matter....

  8. 46 CFR 153.923 - Inerting systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Inerting systems. 153.923 Section 153.923 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK... Requirements § 153.923 Inerting systems. The master shall ensure that the inert gas systems for any cargo...

  9. 43 CFR 20.510 - Fraud or false statements in a Government matter.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Fraud or false statements in a Government matter. 20.510 Section 20.510 Public Lands: Interior Office of the Secretary of the Interior EMPLOYEE RESPONSIBILITIES AND CONDUCT Other Employee Conduct Provisions § 20.510 Fraud or false statements in a...

  10. Inert electrode connection

    SciTech Connect

    Weyand, John D.; Woods, Robert W.; DeYoung, David H.; Ray, Siba P.

    1985-01-01

    An inert electrode connection is disclosed wherein a layer of inert electrode material is bonded to a layer of conductive material by providing at least one intermediate layer of material therebetween comprising a predetermined ratio of inert material to conductive material. In a preferred embodiment, the connection is formed by placing in a die a layer of powdered inert material, at least one layer of a mixture of powdered inert material and conductive material, and a layer of powdered conductive material. The connection is then formed by pressing the material at 15,000-20,000 psi to form a powder compact and then densifying the powder compact in an inert or reducing atmosphere at a temperature of 1200.degree.-1500.degree. C.

  11. 46 CFR 154.910 - Inert gas piping: Location.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Inert gas piping: Location. 154.910 Section 154.910 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Atmospheric Control in Cargo Containment Systems § 154.910 Inert gas piping: Location. Inert gas piping...

  12. 46 CFR 154.912 - Inerted spaces: Relief devices.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Inerted spaces: Relief devices. 154.912 Section 154.912 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Atmospheric Control in Cargo Containment Systems § 154.912 Inerted spaces: Relief devices. Inerted spaces...

  13. 46 CFR 154.910 - Inert gas piping: Location.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Inert gas piping: Location. 154.910 Section 154.910... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Atmospheric Control in Cargo Containment Systems § 154.910 Inert gas piping: Location. Inert gas piping...

  14. 46 CFR 154.904 - Inert gas system: Controls.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Inert gas system: Controls. 154.904 Section 154.904... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Atmospheric Control in Cargo Containment Systems § 154.904 Inert gas system: Controls. The inert gas...

  15. 46 CFR 154.910 - Inert gas piping: Location.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Inert gas piping: Location. 154.910 Section 154.910... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Atmospheric Control in Cargo Containment Systems § 154.910 Inert gas piping: Location. Inert gas piping...

  16. 46 CFR 154.904 - Inert gas system: Controls.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Inert gas system: Controls. 154.904 Section 154.904... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Atmospheric Control in Cargo Containment Systems § 154.904 Inert gas system: Controls. The inert gas...

  17. 46 CFR 154.912 - Inerted spaces: Relief devices.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Inerted spaces: Relief devices. 154.912 Section 154.912 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Atmospheric Control in Cargo Containment Systems § 154.912 Inerted spaces: Relief devices. Inerted spaces...

  18. 46 CFR 154.912 - Inerted spaces: Relief devices.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Inerted spaces: Relief devices. 154.912 Section 154.912 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Atmospheric Control in Cargo Containment Systems § 154.912 Inerted spaces: Relief devices. Inerted spaces...

  19. 46 CFR 154.912 - Inerted spaces: Relief devices.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Inerted spaces: Relief devices. 154.912 Section 154.912 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Atmospheric Control in Cargo Containment Systems § 154.912 Inerted spaces: Relief devices. Inerted spaces...

  20. 46 CFR 154.906 - Inert gas generators.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Inert gas generators. 154.906 Section 154.906 Shipping... Atmospheric Control in Cargo Containment Systems § 154.906 Inert gas generators. The inert gas generator must... sample the discharge of the generator for oxygen content; and (c) Have an audible and visual alarm in...

  1. 46 CFR 154.908 - Inert gas generator: Location.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Inert gas generator: Location. 154.908 Section 154.908... Atmospheric Control in Cargo Containment Systems § 154.908 Inert gas generator: Location. (a) Except as allowed in paragraph (b) of this section, an inert gas generator must be located in the main...

  2. 46 CFR 154.908 - Inert gas generator: Location.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Inert gas generator: Location. 154.908 Section 154.908... Atmospheric Control in Cargo Containment Systems § 154.908 Inert gas generator: Location. (a) Except as allowed in paragraph (b) of this section, an inert gas generator must be located in the main...

  3. 46 CFR 154.906 - Inert gas generators.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Inert gas generators. 154.906 Section 154.906 Shipping... Atmospheric Control in Cargo Containment Systems § 154.906 Inert gas generators. The inert gas generator must... sample the discharge of the generator for oxygen content; and (c) Have an audible and visual alarm in...

  4. 46 CFR 154.908 - Inert gas generator: Location.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Inert gas generator: Location. 154.908 Section 154.908... Atmospheric Control in Cargo Containment Systems § 154.908 Inert gas generator: Location. (a) Except as allowed in paragraph (b) of this section, an inert gas generator must be located in the main...

  5. 46 CFR 154.906 - Inert gas generators.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Inert gas generators. 154.906 Section 154.906 Shipping... Atmospheric Control in Cargo Containment Systems § 154.906 Inert gas generators. The inert gas generator must... sample the discharge of the generator for oxygen content; and (c) Have an audible and visual alarm in...

  6. 46 CFR 154.906 - Inert gas generators.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Inert gas generators. 154.906 Section 154.906 Shipping... Atmospheric Control in Cargo Containment Systems § 154.906 Inert gas generators. The inert gas generator must... sample the discharge of the generator for oxygen content; and (c) Have an audible and visual alarm in...

  7. 46 CFR 154.908 - Inert gas generator: Location.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Inert gas generator: Location. 154.908 Section 154.908... Atmospheric Control in Cargo Containment Systems § 154.908 Inert gas generator: Location. (a) Except as allowed in paragraph (b) of this section, an inert gas generator must be located in the main...

  8. Inert Anode Report

    SciTech Connect

    none,

    1999-07-01

    This ASME report provides a broad assessment of open literature and patents that exist in the area of inert anodes and their related cathode systems and cell designs, technologies that are relevant for the advanced smelting of aluminum. The report also discusses the opportunities, barriers, and issues associated with these technologies from a technical, environmental, and economic viewpoint.

  9. Origins of inert Higgs doublets

    NASA Astrophysics Data System (ADS)

    Kephart, Thomas W.; Yuan, Tzu-Chiang

    2016-05-01

    We consider beyond the standard model embedding of inert Higgs doublet fields. We argue that inert Higgs doublets can arise naturally in grand unified theories where the necessary associated Z2 symmetry can occur automatically. Several examples are discussed.

  10. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  11. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  12. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  13. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  14. 46 CFR 153.500 - Inert gas systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Inert gas systems. 153.500 Section 153.500 Shipping... BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Special Requirements § 153.500 Inert gas systems. When Table 1 refers to this section, a cargo containment system...

  15. 46 CFR 153.500 - Inert gas systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Inert gas systems. 153.500 Section 153.500 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Special Requirements § 153.500 Inert gas systems. When Table...

  16. Inert gas thrusters

    NASA Technical Reports Server (NTRS)

    Kaufman, H. R.; Robinson, R. S.

    1979-01-01

    Inert gas thrusters considered for space propulsion systems were investigated. Electron diffusion across a magnetic field was examined utilizing a basic model. The production of doubly charged ions was correlated using only overall performance parameters. The use of this correlation is therefore possible in the design stage of large gas thrusters, where detailed plasma properties are not available. Argon hollow cathode performance was investigated over a range of emission currents, with the positions of the inert, keeper, and anode varied. A general trend observed was that the maximum ratio of emission to flow rate increased at higher propellant flow rates. It was also found that an enclosed keeper enhances maximum cathode emission at high flow rates. The maximum cathode emission at a given flow rate was associated with a noisy high voltage mode. Although this mode has some similarities to the plume mode found at low flows and emissions, it is encountered by being initially in the spot mode and increasing emission. A detailed analysis of large, inert-gas thruster performance was carried out. For maximum thruster efficiency, the optimum beam diameter increases from less than a meter at under 2000 sec specific impulse to several meters at 10,000 sec. The corresponding range in input power ranges from several kilowatts to megawatts.

  17. The inert Zee model

    NASA Astrophysics Data System (ADS)

    Longas, Robinson; Portillo, Dilia; Restrepo, Diego; Zapata, Oscar

    2016-03-01

    We study a realization of the topology of the Zee model for the generation of neutrino masses at one-loop with a minimal set of vector-like fermions. After imposing an exact Z 2 symmetry to avoid tree-level Higgs-mediated flavor changing neutral currents, one dark matter candidate is obtained from the subjacent inert doublet model, but with the presence of new co-annihilating particles. We show that the model is consistent with the constraints coming from lepton flavor violation processes, oblique parameters, dark matter and neutrino oscillation data.

  18. Inert gas thrusters

    NASA Technical Reports Server (NTRS)

    Kaufman, H. R.

    1977-01-01

    Inert gases, particularly argon and xenon, are of interest as possible alternatives to the usual electric thruster propellants of mercury and cesium. Hollow cathode data were obtained for a wide range of operating conditions. Some test conditions gave plasma coupling voltages at or below the sputtering threshold, hence should permit long operating lifetimes. All observations of hollow cathode operation were consistent with a single theory of operation, in which a significant amount of the total electron emission is from localized areas within the orifice. This mode of emission is also supported by scanning electron microscope photographs that indicate local temperatures at or near the melting temperature of the tungsten tip. Experimental hollow cathode performance was correlated for two orifice diameters, three inert gas propellants, and a range of flow rates for each propellant. The basic theory for the production of doubly ionized argon and xenon was completed. Experimental measurements of the doubly ionized fraction agree with theory within about plus or minus 20 percent. High voltage isolators were studied for the propellant feed line. The breakdown voltage per segment ranged from 300 to over 500 V with argon.

  19. 46 CFR 153.462 - Static discharges from inert gas systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Static discharges from inert gas systems. 153.462... Equipment Special Requirements for Flammable Or Combustible Cargoes § 153.462 Static discharges from inert... create static arcing as the inert gas is injected into the tank....

  20. Inert gas ion thruster

    NASA Technical Reports Server (NTRS)

    Ramsey, W. D.

    1980-01-01

    Inert gas performance with three types of 12 cm diameter magnetoelectrostatic containment (MESC) ion thrusters was tested. The types tested included: (1) a hemispherical shaped discharge chamber with platinum cobalt magnets; (2) three different lengths of the hemispherical chambers with samarium cobalt magnets; and (3) three lengths of the conical shaped chambers with aluminum nickel cobalt magnets. The best argon performance was produced by a 8.0 cm long conical chamber with alnico magnets. The best xenon high mass utilization performance was obtained with the same 8.0 cm long conical thruster. The hemispherical thruster obtained 75 to 87% mass utilization at 185 to 205 eV/ion of singly charged ion equivalent beam.

  1. Inert gas thrusters

    NASA Technical Reports Server (NTRS)

    Kaufman, H. R.; Robinson, R. S.

    1980-01-01

    Some advances in component technology for inert gas thrusters are described. The maximum electron emission of a hollow cathode with Ar was increased 60-70% by the use of an enclosed keeper configuration. Operation with Ar, but without emissive oxide, was also obtained. A 30 cm thruster operated with Ar at moderate discharge voltages give double-ion measurements consistent with a double ion correlation developed previously using 15 cm thruster data. An attempt was made to reduce discharge losses by biasing anodes positive of the discharge plasma. The reason this attempt was unsuccessful is not yet clear. The performance of a single-grid ion-optics configuration was evaluated. The ion impingement on the single grid accelerator was found to approach the value expected from the projected blockage when the sheath thickness next to the accelerator was 2-3 times the aperture diameter.

  2. Inert gas thrusters

    NASA Technical Reports Server (NTRS)

    Kaufman, H. R.

    1978-01-01

    Inert gas thrusters have continued to be of interest for space propulsion applications. Xenon is of interest in that its physical characteristics are well suited to propulsion. High atomic weight and low tankage fraction were major factors in this choice. If a large amount of propellant was required, so that cryogenic storage was practical, argon is a more economical alternative. Argon was also the preferred propellant for ground applications of thruster technology, such as sputter etching and deposition. Additional magnetic field measurements are reported. These measurements should be of use in magnetic field design. The diffusion of electrons through the magnetic field above multipole anodes was studied in detail. The data were consistent with Bohm diffusion across a magnetic field. The theory based on Bohm diffusion was simple and easily used for diffusion calculations. Limited startup data were obtained for multipole discharge chambers. These data were obtained with refractory cathodes, but should be useful in predicting the upper limits for starting with hollow cathodes.

  3. Inert gas thrusters

    NASA Technical Reports Server (NTRS)

    Kaufman, H. R.

    1976-01-01

    Inert gases are of interest as possible alternatives to the usual electric thruster propellants of mercury and cesium. The multipole discharge chamber investigated was shown capable of low discharge chamber losses and flat ion beam profiles with a minimum of optimization. Minimum discharge losses were 200 to 250 eV/ion for xenon and 300 to 350 eV/ion for argon, while flatness parameters in the plane of the accelerator grid were 0.85 to 0.95. The design used employs low magnetic field strengths, which permits the use of sheet-metal parts. The corner problem of the discharge chamber was resolved with recessed corner anodes, which approximately equalized both the magnetic field above the anodes and the electron currents to these anodes. Argon hollow cathodes were investigated at currents up to about 5 amperes using internal thermionic emitters. Cathode chamber diameter optimized in the 1.0 to 2.5 cm range, while orifices diameter optimized in the 0.5 to 5 mm range. The use of a bias voltage for the internal emitter extended the operating range and facilitated starting. The masses of 15 and 30 cm flight type thrusters were estimated at about 4.2 and 10.8 kg.

  4. False assumptions.

    PubMed

    Swaminathan, M

    1997-01-01

    Indian women do not have to be told the benefits of breast feeding or "rescued from the clutches of wicked multinational companies" by international agencies. There is no proof that breast feeding has declined in India; in fact, a 1987 survey revealed that 98% of Indian women breast feed. Efforts to promote breast feeding among the middle classes rely on such initiatives as the "baby friendly" hospital where breast feeding is promoted immediately after birth. This ignores the 76% of Indian women who give birth at home. Blaming this unproved decline in breast feeding on multinational companies distracts attention from more far-reaching and intractable effects of social change. While the Infant Milk Substitutes Act is helpful, it also deflects attention from more pressing issues. Another false assumption is that Indian women are abandoning breast feeding to comply with the demands of employment, but research indicates that most women give up employment for breast feeding, despite the economic cost to their families. Women also seek work in the informal sector to secure the flexibility to meet their child care responsibilities. Instead of being concerned about "teaching" women what they already know about the benefits of breast feeding, efforts should be made to remove the constraints women face as a result of their multiple roles and to empower them with the support of families, governmental policies and legislation, employers, health professionals, and the media. PMID:12321627

  5. 46 CFR 35.30-30 - Portable electric equipment-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Portable electric equipment-TB/ALL. 35.30-30 Section 35... Rules § 35.30-30 Portable electric equipment—TB/ALL. Portable electric equipment must not be used in a... (ii) Gas free; (2) The adjacent compartments are: (i) Gas free; (ii) Inerted; (iii) Filled with...

  6. 46 CFR 34.15-15 - Piping-T/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Piping-T/ALL. 34.15-15 Section 34.15-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS FIREFIGHTING EQUIPMENT Carbon Dioxide Extinguishing... applied as set forth in this paragraph. Only carbon dioxide or other inert gas shall be used for this...

  7. 46 CFR 76.15-15 - Piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Piping. 76.15-15 Section 76.15-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS FIRE PROTECTION EQUIPMENT Carbon Dioxide... forth in this paragraph. Only carbon dioxide or other inert gas shall be used for this test. (2)...

  8. 49 CFR 236.529 - Roadway element inductor; height and distance from rail.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Roadway element inductor; height and distance from...; Roadway § 236.529 Roadway element inductor; height and distance from rail. Inductor of the inert roadway element type shall be maintained with the inductor pole faces at a height above the plane of the tops...

  9. Compressing the Inert Doublet Model

    DOE PAGESBeta

    Blinov, Nikita; Kozaczuk, Jonathan; Morrissey, David E.; de la Puente, Alejandro

    2016-02-16

    The Inert Doublet Model relies on a discrete symmetry to prevent couplings of the new scalars to Standard Model fermions. We found that this stabilizes the lightest inert state, which can then contribute to the observed dark matter density. In the presence of additional approximate symmetries, the resulting spectrum of exotic scalars can be compressed. Here, we study the phenomenological and cosmological implications of this scenario. In conclusion, we derive new limits on the compressed Inert Doublet Model from LEP, and outline the prospects for exclusion and discovery of this model at dark matter experiments, the LHC, and future colliders.

  10. Compressing the Inert Doublet Model

    SciTech Connect

    Blinov, Nikita; Morrissey, David E.; de la Puente, Alejandro

    2015-10-29

    The Inert Doublet Model relies on a discrete symmetry to prevent couplings of the new scalars to Standard Model fermions. We found that this stabilizes the lightest inert state, which can then contribute to the observed dark matter density. In the presence of additional approximate symmetries, the resulting spectrum of exotic scalars can be compressed. Here, we study the phenomenological and cosmological implications of this scenario. Furthermore, we derive new limits on the compressed Inert Doublet Model from LEP, and outline the prospects for exclusion and discovery of this model at dark matter experiments, the LHC, and future colliders.

  11. INERT GAS SHIELD FOR WELDING

    DOEpatents

    Jones, S.O.; Daly, F.V.

    1958-10-14

    S>An inert gas shield is presented for arc-welding materials such as zirconium that tend to oxidize rapidly in air. The device comprises a rectangular metal box into which the welding electrode is introduced through a rubber diaphragm to provide flexibility. The front of the box is provided with a wlndow having a small hole through which flller metal is introduced. The box is supplied with an inert gas to exclude the atmosphere, and with cooling water to promote the solidification of the weld while in tbe inert atmosphere. A separate water-cooled copper backing bar is provided underneath the joint to be welded to contain the melt-through at the root of the joint, shielding the root of the joint with its own supply of inert gas and cooling the deposited weld metal. This device facilitates the welding of large workpieces of zirconium frequently encountered in reactor construction.

  12. -Based Cermet Inert Anodes for Aluminum Electrolysis

    NASA Astrophysics Data System (ADS)

    Tian, ZhongLiang; Lai, YanQing; Li, ZhiYou; Chai, DengPeng; Li, Jie; Liu, YeXiang

    2014-11-01

    The new aluminum electrolysis technology based on inert electrodes has received much interest for several decades because of the environment and energy advantages. The key to realize this technique is the inert anode. This article presents China's recent developments of NiFe2O4-based cermet inert anodes, which include the optimization of material performance, the joint between the cermet inert anode and metallic bar, as well as the results of 20 kA pilot testing for a large-size inert anode group. The problems NiFe2O4-based cermet inert anodes face are also discussed.

  13. 46 CFR 153.501 - Requirement for dry inert gas.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Requirement for dry inert gas. 153.501 Section 153.501 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Special Requirements § 153.501 Requirement for...

  14. 46 CFR 153.501 - Requirement for dry inert gas.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Requirement for dry inert gas. 153.501 Section 153.501 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Special Requirements § 153.501 Requirement for...

  15. 46 CFR 32.53-30 - Positive pressure-T/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Positive pressure-T/ALL. 32.53-30 Section 32.53-30... REQUIREMENTS Inert Gas System § 32.53-30 Positive pressure—T/ALL. Each inert gas system must be designed to enable the operator to maintain a gas pressure of 100 millimeters (4 inches) of water on filled...

  16. 46 CFR 154.1848 - Inerting.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... flammable vapors are purged from the tank by inert gas before air is admitted; and (4) When gas free cargo tanks are to be filled with a flammable cargo, air is purged from the tank by inert gas until the...

  17. 46 CFR 153.462 - Static discharges from inert gas systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... gas systems. An inert gas system on a tank that carries a flammable or combustible cargo must not... 46 Shipping 5 2013-10-01 2013-10-01 false Static discharges from inert gas systems. 153.462... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design...

  18. 46 CFR 153.462 - Static discharges from inert gas systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... gas systems. An inert gas system on a tank that carries a flammable or combustible cargo must not... 46 Shipping 5 2014-10-01 2014-10-01 false Static discharges from inert gas systems. 153.462... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design...

  19. 46 CFR 153.462 - Static discharges from inert gas systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... gas systems. An inert gas system on a tank that carries a flammable or combustible cargo must not... 46 Shipping 5 2012-10-01 2012-10-01 false Static discharges from inert gas systems. 153.462... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design...

  20. Inert anodes for aluminum smelting

    SciTech Connect

    Weyand, J.D.; Ray, S.P.; Baker, F.W.; DeYoung, D.H.; Tarcy, G.P.

    1986-02-01

    The use of nonconsumable or inert anodes for replacement of consumable carbon anodes in Hall electrolysis cells for the production of aluminum has been a technical and commercial goal of the aluminum industry for many decades. This report summarizes the technical success realized in the development of an inert anode that can be used to produce aluminum of acceptable metal purity in small scale Hall electrolysis cells. The inert anode material developed consists of a cermet composition containing the phases: copper, nickel ferrite and nickel oxide. This anode material has an electrical conductivity comparable to anode carbon used in Hall cells, i.e., 150 ohm {sup {minus}1}cm{sup {minus}1}. Metal purity of 99.5 percent aluminum has been produced using this material. The copper metal alloy present in the anode is not removed by anodic dissolution as does occur with cermet anodes containing a metallic nickel alloy. Solubility of the oxide phases in the cryolite electrolyte is reduced by: (1) saturated concentration of alumina, (2) high nickel oxide content in the NiO-NiFe{sub 2}O{sub 4} composition, (3) lowest possible cell operating temperature, (4) additions of alkaline or alkaline earth fluorides to the bath to reduce solubilities of the anode components, and (5) avoiding bath contaminants such as silica. Dissolution rate measurements indicate first-order kinetics and that the rate limiting step for dissolution is mass transport controlled. 105 refs., 234 figs., 73 tabs.

  1. Welding Using Chilled-Inert-Gas Purging

    NASA Technical Reports Server (NTRS)

    Mcgee, William F.; Rybicki, Daniel J.

    1995-01-01

    Report describes study of fusion welding using chilled inert gas. Marked improvement shown in welding of aluminum using chilled helium gas. Chilling inert gas produces two additional benefits: 1) creation of ultradense inert atmosphere around welds; 2) chilled gas cools metal more quickly down to temperature at which metals not reactive.

  2. Inert doublet model and LEP II limits

    SciTech Connect

    Lundstroem, Erik; Gustafsson, Michael; Edsjoe, Joakim

    2009-02-01

    The inert doublet model is a minimal extension of the standard model introducing an additional SU(2) doublet with new scalar particles that could be produced at accelerators. While there exists no LEP II analysis dedicated for these inert scalars, the absence of a signal within searches for supersymmetric neutralinos can be used to constrain the inert doublet model. This translation however requires some care because of the different properties of the inert scalars and the neutralinos. We investigate what restrictions an existing DELPHI Collaboration study of neutralino pair production can put on the inert scalars and discuss the result in connection with dark matter. We find that although an important part of the inert doublet model parameter space can be excluded by the LEP II data, the lightest inert particle still constitutes a valid dark matter candidate.

  3. Mechanisms of inert gas narcosis

    NASA Technical Reports Server (NTRS)

    1973-01-01

    Experiments describing the mechanism of inert gas narcosis are reported. A strain of mice, genetically altered to increase susceptibility to botulin poisoning (synaptic response) appears to increase metabolic rates while breathing argon; this infers a genetically altered synaptic response to both botulin toxin and narcotic gases. Studies of metabolic depression in human subjects breathing either air or a 30% mixture of nitrous oxide indicate that nitrous oxide narcosis does not produce pronounced metabolic depression. Tests on mice for relative susceptibilities to narcosis and oxygen poisoning as a function of fatty membrane composition show that alteration of the fatty acid composition of phospholipids increases resistance to metabolically depressant effects of argon but bas no effect on nitrous oxide narcosis. Another study suggests that acclimatization to low tension prior to high pressure oxygen treatment enhances susceptibility of mice to convulsions and death; developing biochemical lesions cause CNS metabolite reductions and pulmonary damage.

  4. Flammability limits of dusts: Minimum inerting concentrations

    SciTech Connect

    Dastidar, A.G.; Amyotte, P.R.; Going, J.; Chatrathi, K.

    1999-05-01

    A new flammability limit parameter has been defined as the Minimum Inerting Concentration (MIC). This is the concentration of inertant required to prevent a dust explosion regardless of fuel concentration. Previous experimental work at Fike in a 1-m{sup 3} spherical chamber has shown this flammability limit to exist for pulverized coal dust and cornstarch. In the current work, inerting experiments with aluminum, anthraquinone and polyethylene dusts as fuels were performed, using monoammonium phosphate and sodium bicarbonate as inertants. The results show that an MIC exists only for anthraquinone inerted with sodium bicarbonate. The other combustible dust and inertant mixtures did not show a definitive MIC, although they did show a strong dependence between inerting level and suspended fuel concentration. As the fuel concentration increased, the amount of inertant required to prevent an explosion decreased. Even though a definitive MIC was not found for most of the dusts an effective MIC can be estimated from the data. The use of MIC data can aid in the design of explosion suppression schemes.

  5. A dynamic inert metal anode.

    SciTech Connect

    Hryn, J. N.

    1998-11-09

    A new concept for a stable anode for aluminum electrowinning is described. The anode consists of a cup-shaped metal alloy container filled with a molten salt that contains dissolved aluminum. The metal alloy can be any of a number of alloys, but it must contain aluminum as a secondary alloying metal. A possible alloy composition is copper with 5 to 15 weight percent aluminum. In the presence of oxygen, aluminum on the metal anode's exterior surface forms a continuous alumina film that is thick enough to protect the anode from chemical attack by cryolite during electrolysis and thin enough to maintain electrical conductivity. However, the alumina film is soluble in cryolite, so it must be regenerated in situ. Film regeneration is achieved by the transport of aluminum metal from the anode's molten salt interior through the metal wall to the anode's exterior surface, where the transported aluminum oxidizes to alumina in the presence of evolving oxygen to maintain the protective alumina film. Periodic addition of aluminum metal to the anode's interior keeps the aluminum activity in the molten salt at the desired level. This concept for an inert anode is viable as long as the amount of aluminum produced at the cathode greatly exceeds the amount of aluminum required to maintain the anode's protective film.

  6. Axial grading of inert matrix fuels

    SciTech Connect

    Recktenwald, G. D.; Deinert, M. R.

    2012-07-01

    Burning actinides in an inert matrix fuel to 750 MWd/kg IHM results in a significant reduction in transuranic isotopes. However, achieving this level of burnup in a standard light water reactor would require residence times that are twice that of uranium dioxide fuels. The reactivity of an inert matrix assembly at the end of life is less than 1/3 of its beginning of life reactivity leading to undesirable radial and axial power peaking in the reactor core. Here we show that axial grading of the inert matrix fuel rods can reduce peaking significantly. Monte Carlo simulations are used to model the assembly level power distributions in both ungraded and graded fuel rods. The results show that an axial grading of uranium dioxide and inert matrix fuels with erbium can reduces power peaking by more than 50% in the axial direction. The reduction in power peaking enables the core to operate at significantly higher power. (authors)

  7. INERT Atmosphere confinement operability test procedure

    SciTech Connect

    RISENMAY, H.R.

    1999-02-22

    This Operability Test Procedure (OTP) provides instructions for testing operability of the Inert Atmosphere Confinement (IAC). The Inert Atmosphere Confinement was designed and built for opening cans of metal items that might have hydrided surfaces. Unreviewed Safety Question (USQ) PFP-97-005 addresses the discovery of suspected plutonium hydride forming on plutonium metal currently stored in the Plutonium Finishing Plant vaults. Plutonium hydride reacts quickly with air, liberating energy. The Inert Atmosphere Confinement was designed to prevent this sudden liberation of energy by opening the material in an inert argon atmosphere instead of the normal glovebox atmosphere. The IAC is located in glovebox HC-21A, room 230B of the 234-5Z Building at the Plutonium Finishing Plant (PFP) in the 200-West Area of the Hanford Site.

  8. Performance of an adjustable, threaded inertance tube

    NASA Astrophysics Data System (ADS)

    Zhou, W. J.; Pfotenhauer, J. M.; Nellis, G. F.; Liu, S. Y.

    2015-12-01

    The performance of the Stirling type pulse tube cryocooler depends strongly on the design of the inertance tube. The phase angle produced by the inertance tube is very sensitive to its diameter and length. Recent developments are reported here regarding an adjustable inertance device that can be adjusted in real time. The inertance passage is formed by the root of a concentric cylindrical threaded device. The depth of the threads installed on the outer screw varies. In this device, the outer screw can be rotated four and half turns. At the zero turn position the length of the passage is 1.74 m and the hydraulic diameter is 7 mm. By rotating the outer screw, the inner threaded rod engages with additional, larger depth threads. Therefore, at its upper limit of rotation, the inertance passage includes both the original 1.74 m length with 7mm hydraulic diameter plus an additional 1.86 m length with a 10 mm hydraulic diameter. A phase shift change of 24° has been experimentally measured by changing the position of outer screw while operating the device at a frequency of 60 Hz. This phase angle shift is less than the theoretically predicted value due to the presence of a relatively large leak through the thread clearance. Therefore, the distributed component model of the inertance tube was modified to account for the leak path causing the data to agree with the model. Further, the application of vacuum grease to the threads causes the performance of the device to improve substantially.

  9. Inert strength of pristine silica glass fibers

    SciTech Connect

    Smith, W.L.; Michalske, T.A.

    1993-11-01

    Silica glass fibers have been produced and tested under ultra high vacuum (UHV) conditions to investigate the inert strength of pristine fibers in absence of reactive agents. Analysis of the coefficient of variation in diameter ({upsilon}{sub d}) vs the coefficient of variation of breaking strength ({upsilon}{sub {sigma}}) does not adequately explain the variation of breaking stress. Distribution of fiber tensile strength data suggests that the inert strength of such fibers is not single valued and that the intrinsic strength is controlled by defects in the glass. Furthermore, comparison of room temperature UHV data with LN{sub 2} data indicates that these intrinsic strengths are not temperature dependent.

  10. Inert gas effects on embryonic development.

    NASA Technical Reports Server (NTRS)

    Weiss, H. S.; Grimard, M.

    1972-01-01

    It had been found in previous investigations that hatchability of fertile chicken eggs is reduced to 50% or less of controls if incubation takes place in a low nitrogen atmosphere containing He. Although these results suggest some role for nitrogen in embryogenesis, it is possible that a requirement exists for an inert molecule closer in physical characteristics to nitrogen than is He. An investigation is conducted involving incubation at ground level pressure in a gas mixture in which the 79% inert component was either neon or argon. The effect of varying combinations of nitrogen, helium, and oxygen was also studied.

  11. Fast, Nonspattering Inert-Gas Welding

    NASA Technical Reports Server (NTRS)

    Gilbert, Jeffrey L.

    1991-01-01

    Proposed welding technique combines best features of metal (other than tungsten)/inert-gas welding, plasma arc welding, and tungsten/inert-gas welding. Advantages include: wire fed to weld joint preheated, therefore fed at high speed without spattering; high-frequency energy does not have to be supplied to workpiece to initiate welding; size of arc gap not critical, power-supply control circuit adjusts voltage across gap to compensate for changes; only low gas-flow rate needed; welding electrode replaced easily as prefabricated assembly; external wire-feeding manipulator not needed; and welding process relatively forgiving of operator error.

  12. Two systems developed for purifying inert atmospheres

    NASA Technical Reports Server (NTRS)

    Foster, M. S.; Johnson, C. E.; Kyle, M. L.

    1969-01-01

    Two systems, one for helium and one for argon, are used for purifying inert atmospheres. The helium system uses an activated charcoal bed at liquid nitrogen temperature to remove oxygen and nitrogen. The argon system uses heated titanium sponge to remove nitrogen and copper wool beds to remove oxygen. Both use molecular sieves to remove water vapor.

  13. 30 CFR 75.1107-12 - Inerting of mine atmosphere prohibited.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Inerting of mine atmosphere prohibited. 75.1107-12 Section 75.1107-12 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... atmosphere prohibited. No fire suppression device designed to control fire by total flooding shall...

  14. 30 CFR 75.1107-12 - Inerting of mine atmosphere prohibited.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Inerting of mine atmosphere prohibited. 75.1107-12 Section 75.1107-12 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... atmosphere prohibited. No fire suppression device designed to control fire by total flooding shall...

  15. 30 CFR 75.1107-12 - Inerting of mine atmosphere prohibited.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Inerting of mine atmosphere prohibited. 75.1107-12 Section 75.1107-12 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... atmosphere prohibited. No fire suppression device designed to control fire by total flooding shall...

  16. 30 CFR 75.1107-12 - Inerting of mine atmosphere prohibited.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Inerting of mine atmosphere prohibited. 75.1107-12 Section 75.1107-12 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... atmosphere prohibited. No fire suppression device designed to control fire by total flooding shall...

  17. 30 CFR 75.1107-12 - Inerting of mine atmosphere prohibited.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Inerting of mine atmosphere prohibited. 75.1107-12 Section 75.1107-12 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... atmosphere prohibited. No fire suppression device designed to control fire by total flooding shall...

  18. 46 CFR 154.904 - Inert gas system: Controls.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Atmospheric Control in Cargo Containment Systems § 154.904 Inert gas system: Controls. The inert gas...

  19. 46 CFR 154.904 - Inert gas system: Controls.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Atmospheric Control in Cargo Containment Systems § 154.904 Inert gas system: Controls. The inert gas...

  20. Portable spectrometer monitors inert gas shield in welding process

    NASA Technical Reports Server (NTRS)

    Grove, E. L.

    1967-01-01

    Portable spectrometer using photosensitive readouts, monitors the amount of oxygen and hydrogen in the inert gas shield of a tungsten-inert gas welding process. A fiber optic bundle transmits the light from the welding arc to the spectrometer.

  1. Refractory metals welded or brazed with tungsten inert gas equipment

    NASA Technical Reports Server (NTRS)

    Wisner, J. P.

    1965-01-01

    Appropriate brazing metals and temperatures facilitate the welding or brazing of base metals with tungsten inert gas equipment. The highest quality bond is obtained when TIG welding is performed in an inert atmosphere.

  2. 46 CFR 153.500 - Inert gas systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... have a permanent inert gas system that: (a) Maintains the vapor space of the containment system in an inert state by filling the vapor space with a gas that is neither reactive with the cargo nor...

  3. 46 CFR 153.500 - Inert gas systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... have a permanent inert gas system that: (a) Maintains the vapor space of the containment system in an inert state by filling the vapor space with a gas that is neither reactive with the cargo nor...

  4. Schizotypy and false memory.

    PubMed

    Dagnall, Neil; Parker, Andrew

    2009-03-01

    Using the Deese-Roediger-McDermott (DRM) paradigm the present study examined the relationship between schizotypy and recognition memory. Participants scoring in the upper and lower quartile ranges for schizotypy (Schizotypal Personality Questionnaire brief version; SPQ-B) and on each of the SPQ-B subscales (cognitive-perceptual, interpersonal and disorganized) were compared on true and false memory performance. Participants scoring in the lower quartile range on the cognitive-perceptual subscale recognised a higher proportion of both true and false memories than those scoring in the higher quartile range. Participants scoring in the upper quartile on the interpersonal factor recognised fewer true items than those in the lower quartile range. No differences were found for overall schizotypy or on the disorganized subscale. PMID:18817907

  5. A new understanding of inert gas narcosis

    NASA Astrophysics Data System (ADS)

    Meng, Zhang; Yi, Gao; Haiping, Fang

    2016-01-01

    Anesthetics are extremely important in modern surgery to greatly reduce the patient’s pain. The understanding of anesthesia at molecular level is the preliminary step for the application of anesthetics in clinic safely and effectively. Inert gases, with low chemical activity, have been found to cause anesthesia for centuries, but the mechanism is unclear yet. In this review, we first summarize the progress of theories about general anesthesia, especially for inert gas narcosis, and then propose a new hypothesis that the aggregated rather than the dispersed inert gas molecules are the key to trigger the narcosis to explain the steep dose-response relationship of anesthesia. Project supported by the Supercomputing Center of Chinese Academy of Sciences in Beijing, China, the Shanghai Supercomputer Center, China, the National Natural Science Foundation of China (Grant Nos. 21273268, 11290164, and 11175230), the Startup Funding from Shanghai Institute of Applied Physics, Chinese Academy of Sciences (Grant No. Y290011011), “Hundred People Project” from Chinese Academy of Sciences, and “Pu-jiang Rencai Project” from Science and Technology Commission of Shanghai Municipality, China (Grant No. 13PJ1410400).

  6. 46 CFR 154.903 - Inert gas systems: General.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Atmospheric Control in Cargo Containment Systems § 154.903 Inert gas systems: General. (a) Inert gas carried... tanks, hold and interbarrier spaces, and insulation. (b) The boiling point and dew point at atmospheric pressure of the inert gas must be below the temperature of any surface in those spaces or −45 °C (−49...

  7. 46 CFR 154.903 - Inert gas systems: General.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Atmospheric Control in Cargo Containment Systems § 154.903 Inert gas systems: General. (a) Inert gas carried... tanks, hold and interbarrier spaces, and insulation. (b) The boiling point and dewpoint at atmospheric pressure of the inert gas must be below the temperature of any surface in those spaces or −45 °C (−49...

  8. 46 CFR 154.903 - Inert gas systems: General.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Atmospheric Control in Cargo Containment Systems § 154.903 Inert gas systems: General. (a) Inert gas carried... tanks, hold and interbarrier spaces, and insulation. (b) The boiling point and dewpoint at atmospheric pressure of the inert gas must be below the temperature of any surface in those spaces or −45 °C (−49...

  9. 46 CFR 154.903 - Inert gas systems: General.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Atmospheric Control in Cargo Containment Systems § 154.903 Inert gas systems: General. (a) Inert gas carried... tanks, hold and interbarrier spaces, and insulation. (b) The boiling point and dewpoint at atmospheric pressure of the inert gas must be below the temperature of any surface in those spaces or −45 °C (−49...

  10. 46 CFR 154.903 - Inert gas systems: General.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Atmospheric Control in Cargo Containment Systems § 154.903 Inert gas systems: General. (a) Inert gas carried... tanks, hold and interbarrier spaces, and insulation. (b) The boiling point and dewpoint at atmospheric pressure of the inert gas must be below the temperature of any surface in those spaces or −45 °C (−49...

  11. Moon - False Color Mosaic

    NASA Technical Reports Server (NTRS)

    1992-01-01

    This false-color photograph is a composite of 15 images of the Moon taken through three color filters by Galileo's solid-state imaging system during the spacecraft's passage through the Earth-Moon system on December 8, 1992. When this view was obtained, the spacecraft was 425,000 kilometers (262,000 miles) from the Moon and 69,000 kilometers (43,000 miles) from Earth. The false-color processing used to create this lunar image is helpful for interpreting the surface soil composition. Areas appearing red generally correspond to the lunar highlands, while blue to orange shades indicate the ancient volcanic lava flow of a mare, or lunar sea. Bluer mare areas contain more titanium than do the orange regions. Mare Tranquillitatis, seen as a deep blue patch on the right, is richer in titanium than Mare Serenitatis, a slightly smaller circular area immediately adjacent to the upper left of Mare Tranquillitatis. Blue and orange areas covering much of the left side of the Moon in this view represent many separate lava flows in Oceanus Procellarum. The small purple areas found near the center are pyroclastic deposits formed by explosive volcanic eruptions. The fresh crater Tycho, with a diameter of 85 kilometers (53 miles), is prominent at the bottom of the photograph, where part of the Moon's disk is missing.

  12. Inert scalar doublet asymmetry as origin of dark matter

    NASA Astrophysics Data System (ADS)

    Dhen, Mikaël; Hambye, Thomas

    2015-10-01

    In the inert scalar doublet framework, we analyze what would be the effect of a B -L asymmetry that could have been produced at high temperature in the thermal bath of the Universe. We show that unless the "λ5" scalar interaction is tiny, this asymmetry is automatically reprocessed in part into an inert scalar asymmetry that could be at the origin of dark matter today. Along this scenario, the inert mass scale lies in the few-TeV range, and direct detection constraints require that the inert scalar particles decay into a lighter dark matter particle which, as the inert doublet, is odd under a Z2 symmetry.

  13. False color viewing device

    DOEpatents

    Kronberg, James W.

    1992-01-01

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

  14. Callisto False Color

    NASA Technical Reports Server (NTRS)

    1979-01-01

    This false color picture of Callisto was taken by Voyager 2 on July 7, 1979 at a range of 1,094,666 kilometers (677,000 miles) and is centered on 11 degrees N and 171 degrees W. This rendition uses an ultraviolet image for the blue component. Because the surface displays regional contrast in UV, variations in surface materials are apparent. Notice in particular the dark blue haloes which surround bright craters in the eastern hemisphere. The surface of Callisto is the most heavily cratered of the Galilean satellites and resembles ancient heavily cratered terrains on the moon, Mercury and Mars. The bright areas are ejecta thrown out by relatively young impact craters. A large ringed structure, probably an impact basin, is shown in the upper left part of the picture. The color version of this picture was constructed by compositing black and white images taken through the ultraviolet, clear and orange filters.

  15. False color viewing device

    DOEpatents

    Kronberg, J.W.

    1992-10-20

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage. 7 figs.

  16. False color viewing device

    DOEpatents

    Kronberg, J.W.

    1991-05-08

    This invention consists of a viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching, the user`s eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

  17. Techniques for optimizing inerting in electron processors

    NASA Astrophysics Data System (ADS)

    Rangwalla, I. J.; Korn, D. J.; Nablo, S. V.

    1993-07-01

    The design of an "inert gas" distribution system in an electron processor must satisfy a number of requirements. The first of these is the elimination or control of beam produced ozone and NO x which can be transported from the process zone by the product into the work area. Since the tolerable levels for O 3 in occupied areas around the processor are <0.1 ppm, good control techniques are required involving either recombination of the O 3 in the beam heated process zone, or exhausting and dilution of the gas at the processor exit. The second requirement of the inerting system is to provide a suitable environment for completing efficient, free radical initiated addition polymerization. In this case, the competition between radical loss through de-excitation and that from O 2 quenching must be understood. This group has used gas chromatographic analysis of electron cured coatings to study the trade-offs of delivered dose, dose rate and O 2 concentrations in the process zone to determine the tolerable ranges of parameter excursions can be determined for production quality control purposes. These techniques are described for an ink:coating system on paperboard, where a broad range of process parameters have been studied (D, Ġ, O 2. It is then shown how the technique is used to optimize the use of higher purity (10-100 ppm O 2) nitrogen gas for inerting, in combination with lower purity (2-20, 000 ppm O 2) non-cryogenically produced gas, as from a membrane or pressure swing adsorption generators.

  18. C(240)-----The most Chemically Inert Fullerene?

    NASA Technical Reports Server (NTRS)

    Haddon, R. C.; Scuseria, G. E.; Smalley, R. E.

    1997-01-01

    The reactivity of the fullerenes is primarily a function of their strain, as measured by the pyramidalization angle or curvature of the conjugated carbon atoms. The development of faceting in the structure of large icosahedral fullerenes leads to a minimum in the value of the maximum fullerene pyramidalization angle that lies in the vicinity of C-240. On this basis it is argued that C-240 will be the most chemically inert fullerene. This observation explains the production of [10,10] single-walled nanotubes because a C-240 hemisphere is required for the nucleation of such tubes.

  19. Neptune in False Color

    NASA Technical Reports Server (NTRS)

    1989-01-01

    In this false color image of Neptune, objects that are deep in the atmosphere are blue, while those at higher altitudes are white. The image was taken by Voyager 2's wide-angle camera through an orange filter and two different methane filters. Light at methane wavelengths is mostly absorbed in the deeper atmosphere. The bright, white feature is a high altitude cloud just south of the Great Dark Spot. The hard, sharp inner boundary within the bright cloud is an artifact of computer processing on Earth. Other, smaller clouds associated with the Great Dark Spot are white or pink, and are also at high altitudes. Neptune's limb looks reddish because Voyager 2 is viewing it tangentially, and the sunlight is scattered back to space before it can be absorbed by the methane. A long, narrow band of high altitude clouds near the top of the image is located at 25 degrees north latitude, and faint hazes mark the equator and polar regions. The Voyager Mission is conducted by JPL for NASA's Office of Space Science and Applications.

  20. False Color Aurora

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Data from NASA's Galileo spacecraft were used to produce this false-color composite of Jupiter's northern aurora on the night side of the planet. The height of the aurora, the thickness of the auroral arc, and the small-scale structure are revealed for the first time. Images in Galileo's red, green, and clear filters are displayed in red, green, and blue respectively. The smallest resolved features are tens of kilometers in size, which is a ten-fold improvement over Hubble Space Telescope images and a hundred-fold improvement over ground-based images.

    The glow is caused by electrically charged particles impinging on the atmosphere from above. The particles travel along Jupiter's magnetic field lines, which are nearly vertical at this latitude. The auroral arc marks the boundary between the 'closed' field lines that are attached to the planet at both ends and the 'open' field lines that extend out into interplanetary space. At the boundary the particles have been accelerated over the greatest distances, and the glow is especially intense.

    The latitude-longitude lines refer to altitudes where the pressure is 1 bar. The image shows that the auroral emissions originate about 500 kilometers (about 310 miles) above this surface. The colored background is light scattered from Jupiter's bright crescent, which is out of view to the right. North is at the top. The images are centered at 57 degrees north and 184 degrees west and were taken on April 2, 1997 at a range of 1.7 million kilometers (1.05 million miles) by Galileo's Solid State Imaging (SSI) system.

    The Jet Propulsion Laboratory, Pasadena, CA manages the mission for NASA's Office of Space Science, Washington, DC.

    This image and other images and data received from Galileo are posted on the World Wide Web, on the Galileo mission home page at: http:// galileo.jpl.nasa.gov. Background information and educational context for the images can be found at: http:/ /www.jpl.nasa.gov/galileo/sepo.

  1. Leptogenesis, radiative neutrino masses and inert Higgs triplet dark matter

    NASA Astrophysics Data System (ADS)

    Lu, Wen-Bin; Gu, Pei-Hong

    2016-05-01

    We extend the standard model by three types of inert fields including Majorana fermion singlets/triplets, real Higgs singlets/triplets and leptonic Higgs doublets. In the presence of a softly broken lepton number and an exactly conserved Z2 discrete symmetry, these inert fields together can mediate a one-loop diagram for a Majorana neutrino mass generation. The heavier inert fields can decay to realize a successful leptogenesis while the lightest inert field can provide a stable dark matter candidate. As an example, we demonstrate the leptogenesis by the inert Higgs doublet decays. We also perform a systematic study on the inert Higgs triplet dark matter scenario where the interference between the gauge and Higgs portal interactions can significantly affect the dark matter properties.

  2. Inerting Aircraft Fuel Systems Using Exhaust Gases

    NASA Technical Reports Server (NTRS)

    Hehemann, David G.

    2002-01-01

    Our purpose in this proposal was to determine the feasibility of using carbon dioxide, possibly obtained from aircraft exhaust gases as a substance to inert the fuel contained in fuel tanks aboard aircraft. To do this, we decided to look at the effects carbon dioxide has upon commercial Jet-A aircraft fuel. In particular, we looked at the solubility of CO2 in Jet-A fuel, the pumpability of CO2-saturated Jet-A fuel, the flashpoint of Jet-A fuel under various mixtures of air and CO2, the static outgassing of CO2-Saturated Jet-A fuel and the dynamic outgassing of Jet-A fuel during pumping of Jet-A fuel.

  3. Resonance-inert stabilization for space stations

    NASA Technical Reports Server (NTRS)

    Vonpragenau, G. L.

    1972-01-01

    An approach to stabilizing control systems is presented which structures controllers like passive mechanical systems. The controller is visualized as a structural part with a passive behavior similar to springs, dashpots, and masses. If such a controller is connected by a proper feedback arrangement, then a passive mechanical plant cannot upset stability, regardless of masses, resonances, and three-dimensional coupling. The concept of resonance-inert stabilization is explained by structuring the controller of a simple feedback loop. Reactive functions, connections, and matrices are defined and used in the stabilization concept. The realization of a possible Skylab control system is discussed and compared with the present design. This example demonstrates the applicability to three-dimensional problems with lagging controllers.

  4. Diabetes: What's True and False?

    MedlinePlus

    ... How Can I Help a Friend Who Cuts? Diabetes: What's True and False? KidsHealth > For Teens > Diabetes: ... which are false. Eating too much sugar causes diabetes. False: Type 1 diabetes happens when the cells ...

  5. Diabetes: What's True and False?

    MedlinePlus

    ... Sledding, Skiing, Snowboarding, Skating Crushes What's a Booger? Diabetes: What's True and False? KidsHealth > For Kids > Diabetes: ... True or False: Eating Too Much Sugar Causes Diabetes False: When kids get type 1 diabetes , it's ...

  6. Electrolytic production of high purity aluminum using ceramic inert anodes

    DOEpatents

    Ray, Siba P.; Liu, Xinghua; Weirauch, Douglas A.; DiMilia, Robert A.; Dynys, Joseph M.; Phelps, Frankie E.; LaCamera, Alfred F.

    2002-01-01

    A method of producing commercial purity aluminum in an electrolytic reduction cell comprising ceramic inert anodes is disclosed. The method produces aluminum having acceptable levels of Fe, Cu and Ni impurities. The ceramic inert anodes used in the process may comprise oxides containing Fe and Ni, as well as other oxides, metals and/or dopants.

  7. Method of producing hydrogen, and rendering a contaminated biomass inert

    DOEpatents

    Bingham, Dennis N [Idaho Falls, ID; Klingler, Kerry M [Idaho Falls, ID; Wilding, Bruce M [Idaho Falls, ID

    2010-02-23

    A method for rendering a contaminated biomass inert includes providing a first composition, providing a second composition, reacting the first and second compositions together to form an alkaline hydroxide, providing a contaminated biomass feedstock and reacting the alkaline hydroxide with the contaminated biomass feedstock to render the contaminated biomass feedstock inert and further producing hydrogen gas, and a byproduct that includes the first composition.

  8. Electrolytic production of high purity aluminum using inert anodes

    DOEpatents

    Ray, Siba P.; Liu, Xinghua; Weirauch, Jr., Douglas A.

    2001-01-01

    A method of producing commercial purity aluminum in an electrolytic reduction cell comprising inert anodes is disclosed. The method produces aluminum having acceptable levels of Fe, Cu and Ni impurities. The inert anodes used in the process preferably comprise a cermet material comprising ceramic oxide phase portions and metal phase portions.

  9. Effect of inert propellant injection on Mars ascent vehicle performance

    NASA Technical Reports Server (NTRS)

    Colvin, James E.; Landis, Geoffrey A.

    1992-01-01

    A Mars ascent vehicle is limited in performance by the propellant which can be brought from Earth. In some cases the vehicle performance can be improved by injecting inert gas into the engine, if the inert gas is available as an in-situ resource and does not have to be brought from Earth. Carbon dioxide, nitrogen, and argon are constituents of the Martian atmosphere which could be separated by compressing the atmosphere, without any chemical processing step. The effect of inert gas injection on rocket engine performance was analyzed with a numerical combustion code that calculated chemical equilibrium for engines of varying combustion chamber pressure, expansion ratio, oxidizer/fuel ratio, and inert injection fraction. Results of this analysis were applied to several candidate missions to determine how the required mass of return propellant needed in low Earth orbit could be decreased using inert propellant injection.

  10. Inert gas bubbles in bcc Fe

    NASA Astrophysics Data System (ADS)

    Gai, Xiao; Smith, Roger; Kenny, S. D.

    2016-03-01

    The properties of inert gas bubbles in bcc Fe is examined using a combination of static energy minimisation, molecular dynamics and barrier searching methods with empirical potentials. Static energy minimisation techniques indicate that for small Ar and Xe bubbles, the preferred gas to vacancy ratio at 0 K is about 1:1 for Ar and varies between 0.5:1 and 0.9:1 for Xe. In contrast to interstitial He atoms and small He interstitial clusters, which are highly mobile in the lattice, Ar and Xe atoms prefer to occupy substitutional sites and any interstitials present in the lattice soon displace Fe atoms and become substitutional. If a pre-existing bubble is present then there is a capture radius around a bubble which extends up to the 6th neighbour position. Collision cascades can also enlarge an existing bubble by the capture of vacancies. Ar and Xe can diffuse through the lattice through vacancy driven mechanisms but with relatively high energy barriers of 1.8 and 2.0 eV respectively. This indicates that Ar and Xe bubbles are much harder to form than bubbles of He and that such gases produced in a nuclear reaction would more likely be dispersed at substitutional sites without the help of increased temperature or radiation-driven mechanisms.

  11. Neutrino signature of Inert Doublet Dark Matter

    NASA Astrophysics Data System (ADS)

    Andreas, Sarah

    2010-06-01

    In the framework of the Inert Doublet Model and extensions, the signature of neutrinos from dark matter annihilation in the Earth, the Sun and at the Galactic centre is presented. The model contains an extra Higgs doublet, a neutral component of which is chosen as dark matter candidate. There are three distinct mass ranges for which consistency both with WMAP abundance and direct searches can be obtained: a low (4-8 GeV), a middle (60-70 GeV) and a high (500-1500 GeV) WIMP mass range. The first case is of interest as we showed that the model can at the same time give the correct WMAP abundance and account for the positive DAMA results without contradicting other direct searches. We present how capture in the Sun can further constrain this scenario using Super-Kamiokande data. Indirect detection through neutrinos is challenging for the middle and high mass ranges. For the former, the presence of the so-called `iron resonance' gives rise to larger neutrino fluxes for WIMP masses around 60-70 GeV since capture by the Earth is enhanced. The addition of light right-handed Majo-rana neutrinos to the particle content of the model further increases the signal since it opens a direct annihilation channel into mono-energetic neutrinos. Neutrinos from the Galactic centre might be detected for heavy WIMPs if the dark matter density at the Galactic centre is substantially boosted.

  12. Inert matrix fuel behaviour in test irradiations

    NASA Astrophysics Data System (ADS)

    Hellwig, Ch.; Streit, M.; Blair, P.; Tverberg, T.; Klaassen, F. C.; Schram, R. P. C.; Vettraino, F.; Yamashita, T.

    2006-06-01

    Among others, three large irradiation tests on inert matrix fuels have been performed during the last five years: the two irradiation tests IFA-651 and IFA-652 in the OECD Halden Material Test Reactor and the OTTO irradiation in the High Flux Reactor in Petten. While the OTTO irradiation is already completed, the other two irradiations are still ongoing. The objectives of the experiments differ: for OTTO, the focus was on the comparison of different concepts of IMF, i.e. homogeneous fuel versus different types of heterogeneous fuel. In IFA-651, single phase yttria stabilized zirconia (YSZ) doped with Pu is compared with MOX. In IFA-652, the potential of calcia stabilized zirconia (CSZ) as a matrix with and without thoria is evaluated. The design of the three experiments is explained and the current status is reviewed. The experiments show that the homogeneous, single phase YSZ-based or CSZ-based fuel show good and stable irradiation behaviour. It can be said that homogeneous stabilized zirconia based fuel is the most promising IMF concept for an LWR environment. Nevertheless, the fuel temperatures were relatively high due to the low thermal conductivity, potentially leading to high fission gas release, and must be taken into account in the fuel design.

  13. Neutrinos from Inert Doublet dark matter

    SciTech Connect

    Andreas, Sarah; Tytgat, Michel H.G.; Swillens, Quentin E-mail: mtytgat@ulb.ac.be

    2009-04-15

    We investigate the signatures of neutrinos produced in the annihilation of WIMP dark matter in the Earth, the Sun and at the Galactic centre within the framework of the Inert Doublet Model and extensions. We consider a dark matter candidate, that we take to be one of the neutral components of an extra Higgs doublet, in three distinct mass ranges, which have all been shown previously to be consistent with both WMAP abundance and direct detection experiments exclusion limits. Specifically, we consider a light WIMP with mass between 4 and 8 GeV (low), a WIMP with mass around 60-70 GeV (middle) and a heavy WIMP with mass above 500 GeV (high). In the first case, we show that capture in the Sun may be constrained using Super-Kamiokande data. In the last two cases, we argue that indirect detection through neutrinos is challenging but not altogether excluded. For middle masses, we try to make the most benefit of the proximity of the so-called 'iron resonance' that might enhance the capture of the dark matter candidate by the Earth. The signal from the Earth is further enhanced if light right-handed Majorana neutrinos are introduced, in which case the scalar dark matter candidate may annihilate into pairs of mono-energetic neutrinos. In the case of high masses, detection of neutrinos from the Galactic centre might be possible, provided the dark matter abundance is substantially boosted.

  14. False Position, Double False Position and Cramer's Rule

    ERIC Educational Resources Information Center

    Boman, Eugene

    2009-01-01

    We state and prove the methods of False Position (Regula Falsa) and Double False Position (Regula Duorum Falsorum). The history of both is traced from ancient Egypt and China through the work of Fibonacci, ending with a connection between Double False Position and Cramer's Rule.

  15. 40 CFR 180.910 - Inert ingredients used pre- and post-harvest; exemptions from the requirement of a tolerance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Inert ingredients used pre- and post-harvest; exemptions from the requirement of a tolerance. 180.910 Section 180.910 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Exemptions...

  16. 40 CFR 180.930 - Inert ingredients applied to animals; exemptions from the requirement of a tolerance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Inert ingredients applied to animals; exemptions from the requirement of a tolerance. 180.930 Section 180.930 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Exemptions...

  17. 40 CFR 180.1122 - Inert ingredients of semiochemical dispensers; exemptions from the requirement of a tolerance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Inert ingredients of semiochemical dispensers; exemptions from the requirement of a tolerance. 180.1122 Section 180.1122 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD...

  18. 40 CFR 180.1122 - Inert ingredients of semiochemical dispensers; exemptions from the requirement of a tolerance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Inert ingredients of semiochemical dispensers; exemptions from the requirement of a tolerance. 180.1122 Section 180.1122 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD...

  19. 40 CFR 174.533 - Glycine max Herbicide-Resistant Acetolactate Synthase (GM-HRA) inert ingredient; exemption from...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Glycine max Herbicide-Resistant... Glycine max Herbicide-Resistant Acetolactate Synthase (GM-HRA) inert ingredient; exemption from the requirement of a tolerance. Residues of Glycine max herbicide-resistant acetolactate synthase (GM-HRA)...

  20. 40 CFR 174.533 - Glycine max Herbicide-Resistant Acetolactate Synthase (GM-HRA) inert ingredient; exemption from...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Glycine max Herbicide-Resistant... Glycine max Herbicide-Resistant Acetolactate Synthase (GM-HRA) inert ingredient; exemption from the requirement of a tolerance. Residues of Glycine max herbicide-resistant acetolactate synthase (GM-HRA)...

  1. False memories for aggressive acts.

    PubMed

    Laney, Cara; Takarangi, Melanie K T

    2013-06-01

    Can people develop false memories for committing aggressive acts? How does this process compare to developing false memories for victimhood? In the current research we used a simple false feedback procedure to implant false memories for committing aggressive acts (causing a black eye or spreading malicious gossip) or for victimhood (receiving a black eye). We then compared these false memories to other subjects' true memories for equivalent events. False aggressive memories were all too easy to implant, particularly in the minds of individuals with a proclivity towards aggression. Once implanted, the false memories were indistinguishable from true memories for the same events, on several dimensions, including emotional content. Implications for aggression-related memory more generally as well as false confessions are discussed. PMID:23639921

  2. Preliminary Design Report Shippingport Spent Fuel Drying and Inerting System

    SciTech Connect

    JEPPSON, D.W.

    2000-05-18

    A process description and system flow sheets have been prepared to support the design/build package for the Shippingport Spent Fuel Canister drying and inerting process skid. A process flow diagram was prepared to show the general steps to dry and inert the Shippingport fuel loaded into SSFCs for transport and dry storage. Flow sheets have been prepared to show the flows and conditions for the various steps of the drying and inerting process. Calculations and data supporting the development of the flow sheets are included.

  3. Results from electrolysis test of a prototype inert anode: Inert Electrode Program

    SciTech Connect

    Strachan, D.M.; Windisch, C.F. Jr.; Koski, O.H.; Morgan, L.G. ); Peterson, R.D.; Richards, N.E.; Tabereaux, A.T. . Mfg. Technology Lab.)

    1990-05-01

    Nonconsumable or inert anodes are being developed at the Pacific Northwest Laboratory (PNL)({sup a}) for use in the electrolytic production of aluminum. A series of laboratory test on the laboratory scale (Hart et al. 1987; Strachan et al. 1989; Marschman 1989) has shown the technology to be potentially feasible. A series of larger-scale experiments are now being run to determine the viability of the technology on a commercial scale. The results reported here are from a test performed at the Reynolds Metals Company, Manufacturing Technology Laboratory, Sheffield, Alabama, using a prototype anode. The prototype anode was approximately 15 cm in diameter and 20 cm high (Figure 1.1). The objectives of the test were to determine if an anode, produced by a commercial vendor, could survive in a test under conditions approximating those found in a commercial electrolysis cell; to familiarize the Reynolds staff with the operation of such an anode in a subsequent pilot cell test of the inert anode technology; and to familiarize the PNL staff with the operations at the Reynolds Metals Company facility. 8 refs., 39 figs., 9 tabs.

  4. Inert electrodes program: Fiscal Year 1987 Annual Report

    SciTech Connect

    Koski, O.H.; Marschman, S.C.; Schilling, C.H.; Windisch, C.F.

    1988-12-01

    The Inert Electrodes Program is being conducted at the Pacific Northwest Laboratory (PNL) for the US Department of Energy (DOE), Office of Industrial Programs (OIP). The purpose of the program is to develop long-lasting, energy-efficient anodes, cathodes, and ancillary equipment for Hall-Heroult cells used by aluminum industry. The program is divided into three tasks with the following objectives: Inert Anode Development - to improve the energy efficiency of Hall-Heroult cells by development of inert anodes; Stable Cathode Studies - to develop methods for retrofitting Hall-Heroult cells with TiB/sub 2/-based cathode materials; and Sensor Development - to devise sensors to control the chemistry of Hall-Heroult Cells using stable anodes and cathodes. This Inert Electrodes Program annual report highlights the major technical accomplishment of FY 1987. The accomplishments are presented in the following sections: Management, Materials Development and Testing, Materials Evaluation, Stable Cathode Studies, and Sensor Development. 50 refs., 47 figs.

  5. 114. SMALL ARMS (BUILDINGS 9798) AND INERT STOREHOUSE (BLDGS. 1031040) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    114. SMALL ARMS (BUILDINGS 97-98) AND INERT STOREHOUSE (BLDGS. 103-1040) PLAN AND ELEVATIONS, FULLER/SCOTT, MARCH 15, 1941. QP ACC 1791. - Quonset Point Naval Air Station, Roger Williams Way, North Kingstown, Washington County, RI

  6. Inert gas spraying device aids in repair of hazardous systems

    NASA Technical Reports Server (NTRS)

    Teleha, S.

    1965-01-01

    Inert gas spraying device aids in safely making mechanical repairs to a cryogenic fluid system without prior emptying of the system. This method can be applied to any natural or bottled gas system and with modifications to gasoline transports.

  7. A sensitive image intensifier which uses inert gas

    NASA Technical Reports Server (NTRS)

    Kerns, Q. A.; Miller, H. M.

    1972-01-01

    High gain optical image intensifier utilizes inert gas cavity with copper electrodes to form electron avalanches without excessive pulse voltages. Estimated optical gain for device is two times 10 to the power of seven.

  8. Apparatus For Metal/Inert-Gas Welding In Vacuum

    NASA Technical Reports Server (NTRS)

    Stocks, C. O.

    1994-01-01

    Metal/inert-gas welding-torch assembly operates in vacuum. Plasma generated in interior chamber and focused onto workpiece in vacuum. Pinch rollers feed wire to weld puddle. Controlled flow of plasma reduces dispersal in vacuum, preventing extinction.

  9. Inert-Gas Diffuser For Plasma Or Arc Welding

    NASA Technical Reports Server (NTRS)

    Gilbert, Jeffrey L.; Spencer, Carl N.; Hosking, Timothy J.

    1994-01-01

    Inert-gas diffuser provides protective gas cover for weld bead as it cools. Follows welding torch, maintaining continuous flow of argon over newly formed joint and prevents it from oxidizing. Helps to ensure welds of consistently high quality. Devised for plasma arc keyhole welding of plates of 0.25-in. or greater thickness, also used in tungsten/inert-gas and other plasma or arc welding processes.

  10. Reduced False Memory after Sleep

    ERIC Educational Resources Information Center

    Fenn, Kimberly M.; Gallo, David A.; Margoliash, Daniel; Roediger, Henry L., III; Nusbaum, Howard C.

    2009-01-01

    Several studies have shown that sleep contributes to the successful maintenance of previously encoded information. This research has focused exclusively on memory for studied events, as opposed to false memories. Here we report three experiments showing that sleep reduces false memories in the Deese-Roediger-McDermott (DRM) memory illusion. False…

  11. Executive Functioning and Preschoolers' Understanding of False Beliefs, False Photographs, and False Signs

    ERIC Educational Resources Information Center

    Sabbagh, Mark A.; Moses, Louis J.; Shiverick, Sean

    2006-01-01

    Two studies were conducted to investigate the specificity of the relationship between preschoolers' emerging executive functioning skills and false belief understanding. Study 1 (N=44) showed that 3- to 5-year-olds' performance on an executive functioning task that required selective suppression of actions predicted performance on false belief…

  12. Tunneling decay of false kinks

    NASA Astrophysics Data System (ADS)

    Dupuis, Éric; Gobeil, Yan; MacKenzie, Richard; Marleau, Luc; Paranjape, M. B.; Ung, Yvan

    2015-07-01

    We consider the decay of "false kinks," that is, kinks formed in a scalar field theory with a pair of degenerate symmetry-breaking false vacua in 1 +1 dimensions. The true vacuum is symmetric. A second scalar field and a peculiar potential are added in order for the kink to be classically stable. We find an expression for the decay rate of a false kink. As with any tunneling event, the rate is proportional to exp (-SE) where SE is the Euclidean action of the bounce describing the tunneling event. This factor varies wildly depending on the parameters of the model. Of interest is the fact that for certain parameters SE can get arbitrarily small, implying that the kink is only barely stable. Thus, while the false vacuum itself may be very long-lived, the presence of kinks can give rise to rapid vacuum decay.

  13. False allegation of child abduction.

    PubMed

    Canning, Kathleen E; Hilts, Mark A; Muirhead, Yvonne E

    2011-05-01

    Cases in which a child has been falsely reported as missing or abducted can be extremely challenging to the law enforcement agencies responsible for their investigation. In the absence of a witnessed abduction or an obvious crime scene, it is difficult to determine whether a child has actually been abducted or has become a victim of a homicide and a false allegation. The purpose of this study was to examine falsely alleged kidnapping cases and identify successful investigative strategies. Sixty-one adjudicated false allegation cases involving 66 victims were analyzed. The mean age of the victim was 5 years. Victims came from generally unstable, high-risk family situations and were killed primarily by biological parents. Victims were killed because they were unwanted or viewed as an obstacle to a desired goal, or they were victims of abuse or maltreatment that ended in fatality. PMID:21361941

  14. Sleep deprivation and false confessions.

    PubMed

    Frenda, Steven J; Berkowitz, Shari R; Loftus, Elizabeth F; Fenn, Kimberly M

    2016-02-23

    False confession is a major contributor to the problem of wrongful convictions in the United States. Here, we provide direct evidence linking sleep deprivation and false confessions. In a procedure adapted from Kassin and Kiechel [(1996) Psychol Sci 7(3):125-128], participants completed computer tasks across multiple sessions and repeatedly received warnings that pressing the "Escape" key on their keyboard would cause the loss of study data. In their final session, participants either slept all night in laboratory bedrooms or remained awake all night. In the morning, all participants were asked to sign a statement, which summarized their activities in the laboratory and falsely alleged that they pressed the Escape key during an earlier session. After a single request, the odds of signing were 4.5 times higher for the sleep-deprived participants than for the rested participants. These findings have important implications and highlight the need for further research on factors affecting true and false confessions. PMID:26858426

  15. VESPA: False positive probabilities calculator

    NASA Astrophysics Data System (ADS)

    Morton, Timothy D.

    2015-03-01

    Validation of Exoplanet Signals using a Probabilistic Algorithm (VESPA) calculates false positive probabilities and statistically validates transiting exoplanets. Written in Python, it uses isochrones [ascl:1503.010] and the package simpledist.

  16. Nonlinear dynamics of false bottoms

    NASA Astrophysics Data System (ADS)

    Nizovtseva, Irina; Alexandrov, Dmitri; Ryashko, Lev

    2014-05-01

    Nansen from his observations in the Beaufort Sea published in 1897 noted that heat transfer from the fresh water to the arctic salt water is the only source of ice accretion during the polar summer. This transfer mechanism, unusual at first sight, is responsible for the initiation and evolution of a false bottom ice, changing ice properties to a great extent and affecting various processes while interacting with the ocean and the atmosphere. A false bottom represents a thin layer of ice which forms in summer underneath the floe where fresh water lies between the salt water and the ice. Details of how this process occurs in nature are now emerging from different laboratory and field experiments. The false bottoms appearing at the interface between the fresh and salt water as a result of double-diffusive convection normally lie below surface and under-ice melt ponds. Such false bottoms represent the only significant source of ice growth in the Arctic during the spring-summer period. Their evolution influences the mass balance of the Arctic sea-ice cover recognized as an indicator of climate change. However, the quantity, aerial extent and other properties of false bottoms are difficult to measure because coring under the surface melt ponds leads to direct mixing of surface and under-ice water. This explains why their aerial extent and overall volume is still not known despite the fact that the upper limit of the ice coverage by the false bottom is approximately half of the ice surface. The growth of false bottoms also leads to other important consequences for different physical, chemical and biological processes associated with their dynamics. This study addressed to a broad community of readers is concerned with non-linear behavior of false bottoms including their stochastic dynamics due to possible fluctuations of the main process parameters in the ocean and the atmosphere.

  17. 40 CFR 174.705 - Inert ingredients from sexually compatible plant.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS List of Approved Inert Ingredients § 174.705 Inert ingredients from sexually compatible plant. An inert ingredient, and residues of the inert ingredient, are exempt if all of the following conditions are met: (a)...

  18. 40 CFR 174.705 - Inert ingredients from sexually compatible plant.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS List of Approved Inert Ingredients § 174.705 Inert ingredients from sexually compatible plant. An inert ingredient, and residues of the inert ingredient, are exempt if all of the following conditions are met: (a)...

  19. 40 CFR 174.705 - Inert ingredients from sexually compatible plant.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS List of Approved Inert Ingredients § 174.705 Inert ingredients from sexually compatible plant. An inert ingredient, and residues of the inert ingredient, are exempt if all of the following conditions are met: (a)...

  20. Dark matter with topological defects in the Inert Doublet Model

    SciTech Connect

    Hindmarsh, Mark; Kirk, Russell; No, Jose Miguel; West, Stephen M.

    2015-05-26

    We examine the production of dark matter by decaying topological defects in the high mass region m{sub DM}≫m{sub W} of the Inert Doublet Model, extended with an extra U(1) gauge symmetry. The density of dark matter states (the neutral Higgs states of the inert doublet) is determined by the interplay of the freeze-out mechanism and the additional production of dark matter states from the decays of topological defects, in this case cosmic strings. These decays increase the predicted relic abundance compared to the standard freeze-out only case, and as a consequence the viable parameter space of the Inert Doublet Model can be widened substantially. In particular, for a given dark matter annihilation rate lower dark matter masses become viable. We investigate the allowed mass range taking into account constraints on the energy injection rate from the diffuse γ-ray background and Big Bang Nucleosynthesis, together with constraints on the dark matter properties coming from direct and indirect detection limits. For the Inert Doublet Model high-mass region, an inert Higgs mass as low as ∼200 GeV is permitted. There is also an upper limit on string mass per unit length, and hence the symmetry breaking scale, from the relic abundance in this scenario. Depending on assumptions made about the string decays, the limits are in the range 10{sup 12} GeV to 10{sup 13} GeV.

  1. Longitudinal elastic wave propagation characteristics of inertant acoustic metamaterials

    NASA Astrophysics Data System (ADS)

    Kulkarni, Prateek P.; Manimala, James M.

    2016-06-01

    Longitudinal elastic wave propagation characteristics of acoustic metamaterials with various inerter configurations are investigated using their representative one-dimensional discrete element lattice models. Inerters are dynamic mass-amplifying mechanical elements that are activated by a difference in acceleration across them. They have a small device mass but can provide a relatively large dynamic mass presence depending on accelerations in systems that employ them. The effect of introducing inerters both in local attachments and in the lattice was examined vis-à-vis the propagation characteristics of locally resonant acoustic metamaterials. A simple effective model based on mass, stiffness, or their combined equivalent was used to establish dispersion behavior and quantify attenuation within bandgaps. Depending on inerter configurations in local attachments or in the lattice, both up-shift and down-shift in the bandgap frequency range and their extent are shown to be possible while retaining static mass addition to the host structure to a minimum. Further, frequency-dependent negative and even extreme effective-stiffness regimes are encountered. The feasibility of employing tuned combinations of such mass-delimited inertant configurations to engineer acoustic metamaterials that act as high-pass filters without the use of grounded elements or even as complete longitudinal wave inhibitors is shown. Potential device implications and strategies for practical applications are also discussed.

  2. METAL SPRAYER FOR USE IN VACUUM OR INERT ATMOSPHERE

    DOEpatents

    Monroe, R.E.

    1958-10-14

    A metal sprayer is described for use in a vacuum or inert atmosphere with a straight line wire feed and variable electrode contact angle. This apparatus comprises two wires which are fed through straight tubes of two mechanisms positioned on opposite sides of a central tube to which an inert gas is fed. The two mechanisms and the wires being fed constitute electrodes to which electrical current is supplied so that the wires are melted by the electric are formed at their contacting region and sprayed by the gas supplied by the central tube. This apparatus is designed specifically to apply a zirconium coating to uranium in an inert atmosphere and without the use of an oxidizing flame.

  3. Sleep Loss Produces False Memories

    PubMed Central

    Diekelmann, Susanne; Landolt, Hans-Peter; Lahl, Olaf; Born, Jan; Wagner, Ullrich

    2008-01-01

    People sometimes claim with high confidence to remember events that in fact never happened, typically due to strong semantic associations with actually encoded events. Sleep is known to provide optimal neurobiological conditions for consolidation of memories for long-term storage, whereas sleep deprivation acutely impairs retrieval of stored memories. Here, focusing on the role of sleep-related memory processes, we tested whether false memories can be created (a) as enduring memory representations due to a consolidation-associated reorganization of new memory representations during post-learning sleep and/or (b) as an acute retrieval-related phenomenon induced by sleep deprivation at memory testing. According to the Deese, Roediger, McDermott (DRM) false memory paradigm, subjects learned lists of semantically associated words (e.g., “night”, “dark”, “coal”,…), lacking the strongest common associate or theme word (here: “black”). Subjects either slept or stayed awake immediately after learning, and they were either sleep deprived or not at recognition testing 9, 33, or 44 hours after learning. Sleep deprivation at retrieval, but not sleep following learning, critically enhanced false memories of theme words. This effect was abolished by caffeine administration prior to retrieval, indicating that adenosinergic mechanisms can contribute to the generation of false memories associated with sleep loss. PMID:18946511

  4. Sleep deprivation and false confessions

    PubMed Central

    Frenda, Steven J.; Berkowitz, Shari R.; Loftus, Elizabeth F.; Fenn, Kimberly M.

    2016-01-01

    False confession is a major contributor to the problem of wrongful convictions in the United States. Here, we provide direct evidence linking sleep deprivation and false confessions. In a procedure adapted from Kassin and Kiechel [(1996) Psychol Sci 7(3):125–128], participants completed computer tasks across multiple sessions and repeatedly received warnings that pressing the “Escape” key on their keyboard would cause the loss of study data. In their final session, participants either slept all night in laboratory bedrooms or remained awake all night. In the morning, all participants were asked to sign a statement, which summarized their activities in the laboratory and falsely alleged that they pressed the Escape key during an earlier session. After a single request, the odds of signing were 4.5 times higher for the sleep-deprived participants than for the rested participants. These findings have important implications and highlight the need for further research on factors affecting true and false confessions. PMID:26858426

  5. Tunneling decay of false vortices

    NASA Astrophysics Data System (ADS)

    Lee, Bum-Hoon; Lee, Wonwoo; MacKenzie, Richard; Paranjape, M. B.; Yajnik, U. A.; Yeom, Dong-han

    2013-10-01

    We consider the decay of vortices trapped in the false vacuum of a theory of scalar electrodynamics in 2+1 dimensions. The potential is inspired by models with intermediate symmetry breaking to a metastable vacuum that completely breaks a U(1) symmetry, while in the true vacuum, the symmetry is unbroken. The false vacuum is unstable through the formation of true vacuum bubbles; however, the rate of decay can be extremely long. On the other hand, the false vacuum can contain metastable vortex solutions. These vortices contain the true vacuum inside in addition to a unit of magnetic flux and the appropriate topologically nontrivial false vacuum outside. We numerically establish the existence of vortex solutions which are classically stable; however, they can decay via tunneling. In general terms, they tunnel to a configuration which is a large, thin-walled vortex configuration that is now classically unstable to the expansion of its radius. We compute an estimate for the tunneling amplitude in the semiclassical approximation. We believe our analysis would be relevant to superconducting thin films or superfluids.

  6. Evolutionary Psychology and False Confession

    ERIC Educational Resources Information Center

    Bering, Jesse M.; Shackelford, Todd K.

    2005-01-01

    This paper presents comments on Kassin's review, (see record 2005-03019-002) of the psychology of false confessions. The authors note that Kassin's review makes a compelling argument for the need for legal reform in police interrogation practices. Because his work strikes at the heart of the American criminal justice system--its fairness--the…

  7. Multiple True-False Questions

    ERIC Educational Resources Information Center

    Hill, G. C.; Woods, G. T.

    1974-01-01

    Two types of objective questions are compared: the multiple choice item, in which one and only one of several stated alternatives is correct for a given initial statement, and the multiple true-false item, where the stem is followed by several completions of which one or more can be correct. (DT)

  8. MSPI False Indication Probability Simulations

    SciTech Connect

    Dana Kelly; Kurt Vedros; Robert Youngblood

    2011-03-01

    This paper examines false indication probabilities in the context of the Mitigating System Performance Index (MSPI), in order to investigate the pros and cons of different approaches to resolving two coupled issues: (1) sensitivity to the prior distribution used in calculating the Bayesian-corrected unreliability contribution to the MSPI, and (2) whether (in a particular plant configuration) to model the fuel oil transfer pump (FOTP) as a separate component, or integrally to its emergency diesel generator (EDG). False indication probabilities were calculated for the following situations: (1) all component reliability parameters at their baseline values, so that the true indication is green, meaning that an indication of white or above would be false positive; (2) one or more components degraded to the extent that the true indication would be (mid) white, and “false” would be green (negative) or yellow (negative) or red (negative). In key respects, this was the approach taken in NUREG-1753. The prior distributions examined were the constrained noninformative (CNI) prior used currently by the MSPI, a mixture of conjugate priors, the Jeffreys noninformative prior, a nonconjugate log(istic)-normal prior, and the minimally informative prior investigated in (Kelly et al., 2010). The mid-white performance state was set at ?CDF = ?10 ? 10-6/yr. For each simulated time history, a check is made of whether the calculated ?CDF is above or below 10-6/yr. If the parameters were at their baseline values, and ?CDF > 10-6/yr, this is counted as a false positive. Conversely, if one or all of the parameters are set to values corresponding to ?CDF > 10-6/yr but that time history’s ?CDF < 10-6/yr, this is counted as a false negative indication. The false indication (positive or negative) probability is then estimated as the number of false positive or negative counts divided by the number of time histories (100,000). Results are presented for a set of base case parameter values

  9. Nonchamber, Root-Side, Inert-Gas Purging During Welding

    NASA Technical Reports Server (NTRS)

    Mcgee, William F.; Rybicki, Daniel J.

    1995-01-01

    Improved apparatus distributes inert gas to protect against oxidation on root side of weld during welding and after welding while joint remains hot. Simple and lightweight; readily moved along weld path in synchronism with torch. Because it concentrates inert gas where needed, consumes gas at relatively low rate, and not necessary to monitor oxygen content of protective atmosphere. Apparatus does not obscure view of root side of weld. Used for full-penetration plasma-arc welding of such reactive metals as aluminum/lithium alloys and titanium.

  10. Outcome Knowledge and False Belief

    PubMed Central

    Ghrear, Siba E.; Birch, Susan A. J.; Bernstein, Daniel M.

    2016-01-01

    Virtually every social interaction involves reasoning about the perspectives of others, or ‘theory of mind (ToM).’ Previous research suggests that it is difficult to ignore our current knowledge when reasoning about a more naïve perspective (i.e., the curse of knowledge). In this Mini Review, we discuss the implications of the curse of knowledge for certain aspects of ToM. Particularly, we examine how the curse of knowledge influences key measurements of false belief reasoning. In closing, we touch on the need to develop new measurement tools to discern the mechanisms involved in the curse of knowledge and false belief reasoning, and how they develop across the lifespan. PMID:26903922

  11. Partial 'Seminole' Panorama (False Color)

    NASA Technical Reports Server (NTRS)

    2005-01-01

    This view from Spirit's panoramic camera is assembled from frames acquired on Martian days, or sols, 672 and 673 (Nov. 23 and 24, 2005) from the rover's position near an outcrop called 'Seminole.' The view is a southward-looking portion of a larger panorama still being completed. This is a false-color version to emphasize geological differences. It is a composite of images shot through three different filters, admitting light of wavelengths 750 nanometers, 530 nanometers and 430 nanometers.

  12. Analysis and Comparison of Aluminum Alloy Welded Joints Between Metal Inert Gas Welding and Tungsten Inert Gas Welding

    NASA Astrophysics Data System (ADS)

    Zhao, Lei; Guan, Yingchun; Wang, Qiang; Cong, Baoqiang; Qi, Bojin

    2015-09-01

    Surface contamination usually occurs during welding processing and it affects the welds quality largely. However, the formation of such contaminants has seldom been studied. Effort was made to study the contaminants caused by metal inert gas (MIG) welding and tungsten inert gas (TIG) welding processes of aluminum alloy, respectively. SEM, FTIR and XPS analysis was carried out to investigate the microstructure as well as surface chemistry. These contaminants were found to be mainly consisting of Al2O3, MgO, carbide and chromium complexes. The difference of contaminants between MIG and TIG welds was further examined. In addition, method to minimize these contaminants was proposed.

  13. Inert Electrodes Program fiscal year 1988 annual report

    SciTech Connect

    Strachan, D.M.; Marschman, S.C.; Davis, N.C.; Friley, J.R.; Schilling, C.H.

    1989-10-01

    The Inert Electrodes Program, being conducted by Pacific Northwest Laboratory (PNL), involves improving the Hall-Heroult cells used by the Aluminum Industry for the electrochemical production of aluminum. The PNL research centers on developing more energy efficient, longer-lasting anodes and cathodes and ancillary equipment. Major accomplishments for Fiscal Year 1988 are summarized below. 14 refs., 56 figs., 9 tabs.

  14. Critical Thinking: Inert Information, Activated Ignorance, and Activated Knowledge.

    ERIC Educational Resources Information Center

    Paul, Richard; Elder, Linda

    2001-01-01

    Suggests that there are three ways of taking in information: internalizing inert information, forming activated ignorance, or achieving activated knowledge. Explains that only activated knowledge leads the learner, by implication, to more knowledge, and that seeking the logic of things can lead to discovery of activated knowledge. (NB)

  15. 33 CFR 154.2107 - Inerting, enriching, and diluting systems.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... activates an alarm that satisfies the requirements of 33 CFR 154.2100(e) when the amount of enriching gas... diluting system must be equipped, except as permitted by 33 CFR 154.2105(a), with a gas injection and... point, if a combustion device is used to produce the inert gas; and (5) Have an alarm value in...

  16. Passive vehicle suspensions employing inerters with multiple performance requirements

    NASA Astrophysics Data System (ADS)

    Hu, Yinlong; Chen, Michael Z. Q.; Shu, Zhan

    2014-04-01

    This paper investigates passive vehicle suspensions with inerters by considering multiple performance requirements including ride comfort, suspension deflection and tyre grip, where suspension deflection performance is novelly considered which is formulated as a part of objective functions and a constraint separately. Six suspension configurations are analyzed and the analytical solutions for each performance measure are derived. The conditions for each configuration to be strictly better than the simpler ones are obtained by presenting the analytical solutions of each configuration based on those of the simpler ones. Then, two stages of comparisons are given to show the performance limitations of suspension deflection for passive suspensions with inerters. In the first stage, it is shown that although the configurations with inerters can improve the mixed performance of ride comfort and tyre grip, the suspension deflection performance is significantly decreased simultaneously. In the second stage, it is shown that for passive suspensions with inerters, suspension deflection is the more basic limitation for both ride comfort and tyre grip performance by doing comparisons among mixed ride comfort and suspension deflection optimization, mixed ride comfort and tyre grip optimization, and mixed suspension deflection and tyre grip optimization. Finally, the problem of mixed ride comfort and tyre grip performance optimization with equal suspension deflection is investigated. The limitations of suspension deflection for each configuration are further highlighted.

  17. 33 CFR 154.824 - Inerting, enriching, and diluting systems.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... oxygen analyzers are used, the higher oxygen concentration reading controls the inerting or enriching... section. (f) Each oxygen or hydrocarbon analyzer required by this section must: (1) Be installed in... concentration continuously not more than 30 pipe diameters from the gas injection point. (g) Oxygen...

  18. Determination of Ethane-1,2-diamine in Inert Complexes.

    ERIC Educational Resources Information Center

    Searle, Graeme H.

    1985-01-01

    Describes a procedure for determining ethane-1,2-diamine (EN) which is generally applicable for inert or labile complexes or for EN in its salts, although it cannot be used directly with ammonium or coordinated ammonia. It gives results with five percent accuracy or better and requires less than one hour laboratory time. (JN)

  19. 33 CFR 157.164 - Use of inert gas system.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.164 Use of inert gas system. (a) The... ensure the following: (1) Before each cargo tank is crude oil washed, the oxygen content in the tank is... the ullage space. (2) Before each cargo tank with partial bulkheads is crude oil washed, each area...

  20. Symmetry and inert states of spin Bose-Einstein condensates

    SciTech Connect

    Yip, S.-K.

    2007-02-15

    We construct the list of all possible inert states of spin Bose-Einstein condensates for S{<=}4. In doing so, we also obtain their symmetry properties. These results are applied to classify line defects of spin condensates in zero magnetic field.

  1. False advertising in the greenhouse?

    NASA Astrophysics Data System (ADS)

    Banse, K.

    1991-12-01

    Most scientists are convinced of the importance of their own research subjects. Broecker [1991] has deplored the temptation, if not the tendency, to go overboard and exaggerate this importance once funding enters the mind. In particular, he alleges inflated or even false claims by biological (and other) oceanographers regarding the relevance of their research to the "greenhouse effect," caused by the anthropogenic enhancement of the atmospheric CO2 content. He writes [Broecker, 1991, p. 191]: "In my estimation, on any list of subjects requiring intense study with regard to the prediction of the consequences of CO2 buildup in the atmosphere, I would place marine biological cycles near the bottom."

  2. 'Payson' Panorama in False Color

    NASA Technical Reports Server (NTRS)

    2006-01-01

    The panoramic camera aboard NASA's Mars Exploration Rover Opportunity acquired this panorama of the 'Payson' outcrop on the western edge of 'Erebus' Crater during Opportunity's sol 744 (Feb. 26, 2006). From this vicinity at the northern end of the outcrop, layered rocks are observed in the crater wall, which is about 1 meter (3.3 feet) thick. The view also shows rocks disrupted by the crater-forming impact event and subjected to erosion over time.

    To the left of the outcrop, a flat, thin layer of spherule-rich soils overlies more outcrop materials. The rover is currently traveling down this 'road' and observing the approximately 25-meter (82-foot) length of the outcrop prior to departing Erebus crater.

    The panorama camera took 28 separate exposures of this scene, using four different filters. The resulting panorama covers about 90 degrees of terrain around the rover. This false-color rendering was made using the camera's 753-nanometer, 535-nanometer and 423-nanometer filters. Using false color enhances the subtle color differences between layers of rocks and soils in the scene so that scientists can better analyze them. Image-to-image seams have been eliminated from the sky portion of the mosaic to better simulate the vista a person standing on Mars would see.

  3. Building false memories without suggestions.

    PubMed

    Foster, Jeffrey L; Garry, Maryanne

    2012-01-01

    People can come to remember doing things they have never done. The question we asked in this study is whether people can systematically come to remember performing actions they never really did, in the absence of any suggestion from the experimenter. People built LEGO vehicles, performing some steps but not others. For half the people, all the pieces needed to assemble each vehicle were laid out in order in front of them while they did the building; for the other half, the pieces were hidden from view. The next day, everyone returned for a surprise recognition test. People falsely and confidently remembered having carried out steps they did not; those who saw all the pieces while they built each vehicle were more likely to correctly remember performing steps they did perform but equally likely to falsely remember performing steps they did not. We explain our results using the source monitoring framework: People used the relationships between actions to internally generate the missing, related actions, later mistaking that information for genuine experience. PMID:22774684

  4. Cape Verde in False Color

    NASA Technical Reports Server (NTRS)

    2007-01-01

    A promontory nicknamed 'Cape Verde' can be seen jutting out from the walls of Victoria Crater in this false-color picture taken by the panoramic camera on NASA's Mars Exploration Rover Opportunity. The rover took this picture on martian day, or sol, 1329 (Oct. 20, 2007), more than a month after it began descending down the crater walls -- and just 9 sols shy of its second Martian birthday on sol 1338 (Oct. 29, 2007). Opportunity landed on the Red Planet on Jan. 25, 2004. That's nearly four years ago on Earth, but only two on Mars because Mars takes longer to travel around the sun than Earth. One Martian year equals 687 Earth days.

    This view was taken using three panoramic-camera filters, admitting light with wavelengths centered at 750 nanometers (near infrared), 530 nanometers (green) and 430 nanometers (violet).

  5. 40 CFR 174.525 - E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false E. coli B-D-glucuronidase enzyme as a... E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption from the requirement of a tolerance. Residues of E. coli B-D-glucuronidase enzyme are exempt from...

  6. 40 CFR 174.525 - E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 24 2014-07-01 2014-07-01 false E. coli B-D-glucuronidase enzyme as a... E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption from the requirement of a tolerance. Residues of E. coli B-D-glucuronidase enzyme are exempt from...

  7. 40 CFR 174.525 - E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false E. coli B-D-glucuronidase enzyme as a... E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption from the requirement of a tolerance. Residues of E. coli B-D-glucuronidase enzyme are exempt from...

  8. 40 CFR 174.525 - E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 24 2011-07-01 2011-07-01 false E. coli B-D-glucuronidase enzyme as a... E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption from the requirement of a tolerance. Residues of E. coli B-D-glucuronidase enzyme are exempt from...

  9. 40 CFR 174.525 - E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false E. coli B-D-glucuronidase enzyme as a... E. coli B-D-glucuronidase enzyme as a plant-incorporated protectant inert ingredient; exemption from the requirement of a tolerance. Residues of E. coli B-D-glucuronidase enzyme are exempt from...

  10. 40 CFR 174.705 - Inert ingredients from sexually compatible plant.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... genetic material that encodes the inert ingredient or leads to the production of the inert ingredient is derived from a plant sexually compatible with the recipient food plant. (b) The genetic material has...

  11. Nonlinear Pressure Shifts of Rubidium in Inert Gases

    NASA Astrophysics Data System (ADS)

    McGuyer, Bart; Jau, Yuan-Yu; Happer, William

    2009-05-01

    Vapor-cell atomic frequency standards are based on the hyperfine (microwave) magnetic-resonance frequencies of optically pumped alkali-metal atoms in inert buffer gas. Through the hyperfine-shift interaction, buffer gas induces pressure shift and broadening in these microwave resonances. Previous work uncovered nonlinear dependence in the pressure shifts of ^87Rb and Cs atoms to the pressure of buffer gases Ar and Kr, but not He or N2. The nonlinearity is thought to result from alteration to the hyperfine-shift interaction due to temporary van der Waals molecules formed between alkali-metal and buffer-gas atoms. We investigate nonlinear pressure shifts for both isotopes of Rb, ^87Rb and ^85Rb. This study will test the current model for nonlinear pressure shifts of alkali metals in inert gases.

  12. Cermet sphere-pac concept for inert matrix fuel

    NASA Astrophysics Data System (ADS)

    Pouchon, M. A.; Nakamura, M.; Hellwig, Ch.; Ingold, F.; Degueldre, C.

    2003-06-01

    In the inert matrix fuel concept, plutonium reprocessed from spent fuel is burned in an inert matrix, e.g. yttria-stabilized zirconia. Coming from wet reprocessing, the internal gelation can perform an easy micro-spheres production. Utilization of these particles in a sphere-pac realizes a direct fuel production. Besides being economical, this direct usage offers an almost dustless fabrication. One disadvantage of yttria-stabilized zirconia as matrix is its low thermal conductivity. A further reduction by the macroscopic structure of a sphere bed seems unacceptable. This can be eluded by the insertion of a highly conducting phase. Similar to the cermet concept with the embedment of ceramic fuel into metal, the infiltration of a fine metal fraction into a coarse ceramic fuel fraction is studied here. The initial thermal conductivity shows much higher calculated values and the sintering behaviour is also clearly enhanced compared to the pure ceramic bed.

  13. Operation of the J-series thruster using inert gas

    NASA Technical Reports Server (NTRS)

    Rawlin, V. K.

    1982-01-01

    Electron bombardment ion thrusters using inert gases are candidates for large space systems. The J-Series 30 cm diameter thruster, designed for operation up to 3 k-W with mercury, is at a state of technology readiness. The characteristics of operation with xenon, krypton, and argon propellants in a J-Series thruster with that obtained with mercury are compared. The performance of the discharge chamber, ion optics, and neutralizer and the overall efficiency as functions of input power and specific impulse and thruster lifetime were evaluated. As expected, the discharge chamber performance with inert gases decreased with decreasing atomic mass. Aspects of the J-Series thruster design which would require modification to provide operation at high power with insert gases were identified.

  14. Entropic Heat Effects in Aluminum Electrolysis Cells with Inert Anodes

    NASA Astrophysics Data System (ADS)

    Solheim, Asbjørn

    2016-04-01

    While the overall energy requirement for the aluminum electrolysis is well known and can be calculated from readily available thermodynamic data, the distribution of the different types of energy to the anode, the cathode, and the electrolyte is not straightforward. The present attempt is based on the application of activity data including partial entropies on the electrode reactions in a cell operating with inert anodes. The calculations indicate that the cell reaction implies a relatively strong cooling of the anode, a moderate heating of the cathode, and a moderate cooling of the electrolyte. The mass- and heat transfer coefficients at the anode in a cell with inert anodes were estimated. The electrolyte at the anode will be higher in aluminum fluoride, lower in alumina, and colder than the bulk of the electrolyte. The cooling and heating effects are only marginally different from the situation prevailing in traditional aluminum electrolysis cells with carbon anodes.

  15. The electroweak phase transition in the Inert Doublet Model

    SciTech Connect

    Blinov, Nikita; Profumo, Stefano; Stefaniak, Tim

    2015-07-21

    We study the strength of a first-order electroweak phase transition in the Inert Doublet Model (IDM), where particle dark matter (DM) is comprised of the lightest neutral inert Higgs boson. We improve over previous studies in the description and treatment of the finite-temperature effective potential and of the electroweak phase transition. We focus on a set of benchmark models inspired by the key mechanisms in the IDM leading to a viable dark matter particle candidate, and illustrate how to enhance the strength of the electroweak phase transition by adjusting the masses of the yet undiscovered IDM Higgs states. We argue that across a variety of DM masses, obtaining a strong enough first-order phase transition is a generic possibility in the IDM. We find that due to direct dark matter searches and collider constraints, a sufficiently strong transition and a thermal relic density matching the universal DM abundance is possible only in the Higgs funnel regime.

  16. Inert blanketing of a hydride bed using typical grade protium

    SciTech Connect

    Klein, J.E.

    2015-03-15

    This paper describes the impact of 500 ppm (0.05%) impurities in protium on the absorption rate of a 9.66 kg LaNi{sub 4.25}Al{sub 0.75} (LANA0.75) metal hydride bed. The presence of 500 ppm or less inerts (i.e. non-hydrogen isotopes) can significantly impact hydrogen bed absorption rates. The impact on reducing absorption rates is significantly greater than predicted assuming uniform temperature, pressure, and compositions throughout the bed. Possible explanations are discussed. One possibility considered was the feed gas contained impurity levels higher than 500 ppm. It was shown that a level of 5000 ppm of inerts would have been necessary to fit the experimental result so this possibility wa dismissed. Another possibility is that the impurities in the protium supply reacted with the hydride material and partially poisoned the hydride. If the hydride were poisoned with CO or another impurity, the removal of the over-pressure gas in the bed would not be expected to allow the hydride loading of the bed to continue as the experimental results showed, so this possibility was also dismissed. The last possibility questions the validity of the calculations. It is assumed in all the calculations that the gas phase composition, temperature, and pressure are uniform throughout the bed. These assumptions are less valid for large beds where there can be large temperature, pressure, and composition gradients throughout the bed. Eventually the impact of 0.05% inerts in protium on bed absorption rate is shown and explained in terms of an increase in inert partial pressure as the bed was loaded.

  17. METHOD OF OBTAINING AN IMPROVED WELD IN INERT ARC WELDING

    DOEpatents

    Correy, T.B.

    1962-12-11

    A method is reported for inert arc welding. An a-c welding current is applied to the workpiece and welding electrode such that the positive portion of each cycle thereof, with the electrode positive, has only sufficient energy to clean the surface of the workpiece and the negative portion of each cycle thereof, with the electrode negative, contains the energy required to weld. (AEC)

  18. Evolution of weak disturbances in inert binary mixtures

    NASA Technical Reports Server (NTRS)

    Rasmussen, M. L.

    1977-01-01

    The evolution of weak disturbances in inert binary mixtures is determined for the one-dimensional piston problem. The interaction of the dissipative and nonlinear mechanisms is described by Burgers' equation. The binary mixture diffusion mechanisms enter as an additive term in an effective diffusivity. Results for the impulsive motion of a piston moving into an ambient medium and the sinusoidally oscillating piston are used to illustrate the results and elucidate the incorrect behavior pertaining to the associated linear theory.

  19. A new viable region of the inert doublet model

    SciTech Connect

    Honorez, Laura Lopez; Yaguna, Carlos E. E-mail: llopezho@ulb.ac.be

    2011-01-01

    The inert doublet model, a minimal extension of the Standard Model by a second Higgs doublet, is one of the simplest and most attractive scenarios that can explain the dark matter. In this paper, we demonstrate the existence of a new viable region of the inert doublet model featuring dark matter masses between M{sub W} and about 160 GeV. Along this previously overlooked region of the parameter space, the correct relic density is obtained thanks to cancellations between different diagrams contributing to dark matter annihilation into gauge bosons (W{sup +}W{sup −} and Z{sup 0}Z{sup 0}). First, we explain how these cancellations come about and show several examples illustrating the effect of the parameters of the model on the cancellations themselves and on the predicted relic density. Then, we perform a full scan of the new viable region and analyze it in detail by projecting it onto several two-dimensional planes. Finally, the prospects for the direct and the indirect detection of inert Higgs dark matter within this new viable region are studied. We find that present direct detection bounds already rule out a fraction of the new parameter space and that future direct detection experiments, such as Xenon100, will easily probe the remaining part in its entirety.

  20. Structure of Inert Gases Adsorbed in MCM-41

    NASA Astrophysics Data System (ADS)

    Evans, Dylan; Sokol, Paul

    One-dimensional quantum liquids of 3He or 4He have generated recent interest for investigation in the Luttinger liquid model. Unfortunately, current studies lack a clear demonstration of definitively one-dimensional behavior. We propose using the templated, porous material, MCM-41, as a host for an atomic Luttinger liquid. In general, the pores of MCM-41 are too wide to provide a strictly one-dimensional environment, so we investigate preplating these pores with inert gases to effectively reduce their diameter. We present the results of studies of the structure of inert gases in MCM-41. Nitrogen sorption isotherms were used to characterize the sample. Then, using inert gases as adsorbates, we determined the minimum effective pore diameter that can be achieved in our sample before capillary condensation takes over. X-ray powder diffraction (XRD) was performed on the ideally preplated sample to investigate the structure of the adsorbates in the nanopores. The XRD measurements are compared to simulations of core-shell cylinder model scattering, and the validity of the model is assessed. The prospects for creating a definitively one-dimensional channel for the application of studying the structure and dynamics of helium confined in one dimension are discussed. This work was supported by the National Science Foundation under Grant DGE-1069091.

  1. Reduced temperature aluminum production in an electrolytic cell having an inert anode

    DOEpatents

    Dawless, Robert K.; Ray, Siba P.; Hosler, Robert B.; Kozarek, Robert L.; LaCamera, Alfred F.

    2000-01-01

    Aluminum is produced by electrolytic reduction of alumina in a cell having a cathode, an inert anode and a molten salt bath containing metal fluorides and alumina. The inert anode preferably contains copper, silver and oxides of iron and nickel. Reducing the molten salt bath temperature to about 900-950.degree. C. lowers corrosion on the inert anode constituents.

  2. 40 CFR 174.705 - Inert ingredients from sexually compatible plant.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... compatible plant. 174.705 Section 174.705 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PROCEDURES AND REQUIREMENTS FOR PLANT-INCORPORATED PROTECTANTS List of Approved Inert Ingredients § 174.705 Inert ingredients from sexually compatible plant. An inert...

  3. White Rock in False Color

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site]

    The THEMIS VIS camera is capable of capturing color images of the Martian surface using five different color filters. In this mode of operation, the spatial resolution and coverage of the image must be reduced to accommodate the additional data volume produced from using multiple filters. To make a color image, three of the five filter images (each in grayscale) are selected. Each is contrast enhanced and then converted to a red, green, or blue intensity image. These three images are then combined to produce a full color, single image. Because the THEMIS color filters don't span the full range of colors seen by the human eye, a color THEMIS image does not represent true color. Also, because each single-filter image is contrast enhanced before inclusion in the three-color image, the apparent color variation of the scene is exaggerated. Nevertheless, the color variation that does appear is representative of some change in color, however subtle, in the actual scene. Note that the long edges of THEMIS color images typically contain color artifacts that do not represent surface variation.

    This false color image shows the wind eroded deposit in Pollack Crater called 'White Rock'. This image was collected during the Southern Fall Season.

    Image information: VIS instrument. Latitude -8, Longitude 25.2 East (334.8 West). 0 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of

  4. Southern Spring in False Color

    NASA Technical Reports Server (NTRS)

    2004-01-01

    [figure removed for brevity, see original site]

    The Odyssey spacecraft has completed a full Mars year of observations of the red planet. For the next several weeks the Image of the Day will look back over this first mars year. It will focus on four themes: 1) the poles - with the seasonal changes seen in the retreat and expansion of the caps; 2) craters - with a variety of morphologies relating to impact materials and later alteration, both infilling and exhumation; 3) channels - the clues to liquid surface flow; and 4) volcanic flow features. While some images have helped answer questions about the history of Mars, many have raised new questions that are still being investigated as Odyssey continues collecting data as it orbits Mars.

    This image was collected June 25, 2003 during the southern spring season. This false color image shows both the layered ice cap and darker 'spots' that are seen only when the sun first lights the polar surface.

    Image information: VIS instrument. Latitude -82.3, Longitude 306 East (54 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the

  5. Iani Chaos in False Color

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site]

    The THEMIS VIS camera is capable of capturing color images of the Martian surface using five different color filters. In this mode of operation, the spatial resolution and coverage of the image must be reduced to accommodate the additional data volume produced from using multiple filters. To make a color image, three of the five filter images (each in grayscale) are selected. Each is contrast enhanced and then converted to a red, green, or blue intensity image. These three images are then combined to produce a full color, single image. Because the THEMIS color filters don't span the full range of colors seen by the human eye, a color THEMIS image does not represent true color. Also, because each single-filter image is contrast enhanced before inclusion in the three-color image, the apparent color variation of the scene is exaggerated. Nevertheless, the color variation that does appear is representative of some change in color, however subtle, in the actual scene. Note that the long edges of THEMIS color images typically contain color artifacts that do not represent surface variation.

    This false color image of a portion of the Iani Chaos region was collected during the Southern Fall season.

    Image information: VIS instrument. Latitude -2.6 Longitude 342.4 East (17.6 West). 36 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The

  6. Mimas Showing False Colors #2

    NASA Technical Reports Server (NTRS)

    2005-01-01

    This false color image of Saturn's moon Mimas reveals variation in either the composition or texture across its surface.

    During its approach to Mimas on Aug. 2, 2005, the Cassini spacecraft narrow-angle camera obtained multi-spectral views of the moon from a range of 228,000 kilometers (142,500 miles).

    This image is a color composite of narrow-angle ultraviolet, green, infrared and clear filter images, which have been specially processed to accentuate subtle changes in the spectral properties of Mimas' surface materials. To create this view, three color images (ultraviolet, green and infrared) were combined with a single black and white picture that isolates and maps regional color differences to create the final product.

    Shades of blue and violet in the image at the right are used to identify surface materials that are bluer in color and have a weaker infrared brightness than average Mimas materials, which are represented by green.

    Herschel crater, a 140-kilometer-wide (88-mile) impact feature with a prominent central peak, is visible in the upper right of the image. The unusual bluer materials are seen to broadly surround Herschel crater. However, the bluer material is not uniformly distributed in and around the crater. Instead, it appears to be concentrated on the outside of the crater and more to the west than to the north or south. The origin of the color differences is not yet understood. It may represent ejecta material that was excavated from inside Mimas when the Herschel impact occurred. The bluer color of these materials may be caused by subtle differences in the surface composition or the sizes of grains making up the icy soil.

    This image was obtained when the Cassini spacecraft was above 25 degrees south, 134 degrees west latitude and longitude. The Sun-Mimas-spacecraft angle was 45 degrees and north is at the top.

    The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian

  7. Development of a standard bench-scale cell for electrochemical studies on inert anodes. Inert Anode/Cathode Program

    SciTech Connect

    Windisch, C.F. Jr.; Boget, D.I.

    1986-07-01

    Objective of this work was to develop a standard bench-scale cell for performing short-term ac and dc polarization studies on inert anode candidate materials in molten cryolite. Two designs for electrochemical cells were developed and successfully evaluated in short-term experiments. Both cells consisted on the inert anode as a small cylindrical specimen partially sheathed in alumina, an Al/Al/sub 2/O/sub 3/ reference electrode, and a cryolite bath saturated in alumina. The difference between the two cells was in the design of the cathode. One cell used a bare solid metal cathode; the other used an aluminum pad similar to the Hall-Heroult configuration.

  8. Mimas Showing False Colors #1

    NASA Technical Reports Server (NTRS)

    2005-01-01

    False color images of Saturn's moon, Mimas, reveal variation in either the composition or texture across its surface.

    During its approach to Mimas on Aug. 2, 2005, the Cassini spacecraft narrow-angle camera obtained multi-spectral views of the moon from a range of 228,000 kilometers (142,500 miles).

    The image at the left is a narrow angle clear-filter image, which was separately processed to enhance the contrast in brightness and sharpness of visible features. The image at the right is a color composite of narrow-angle ultraviolet, green, infrared and clear filter images, which have been specially processed to accentuate subtle changes in the spectral properties of Mimas' surface materials. To create this view, three color images (ultraviolet, green and infrared) were combined into a single black and white picture that isolates and maps regional color differences. This 'color map' was then superimposed over the clear-filter image at the left.

    The combination of color map and brightness image shows how the color differences across the Mimas surface materials are tied to geological features. Shades of blue and violet in the image at the right are used to identify surface materials that are bluer in color and have a weaker infrared brightness than average Mimas materials, which are represented by green.

    Herschel crater, a 140-kilometer-wide (88-mile) impact feature with a prominent central peak, is visible in the upper right of each image. The unusual bluer materials are seen to broadly surround Herschel crater. However, the bluer material is not uniformly distributed in and around the crater. Instead, it appears to be concentrated on the outside of the crater and more to the west than to the north or south. The origin of the color differences is not yet understood. It may represent ejecta material that was excavated from inside Mimas when the Herschel impact occurred. The bluer color of these materials may be caused by subtle differences in

  9. Investigation on the Inertance Tubes of Pulse Tube Cryocooler Without Reservoir

    NASA Astrophysics Data System (ADS)

    Liu, Y. J.; Yang, L. W.; Liang, J. T.; Hong, G. T.

    2010-04-01

    Phase angle is of vital importance for high-efficiency pulse tube cryocoolers (PTCs). Inertance tube as the main phase shifter is useful for the PTCs to obtain appropriate phase angle. Experiments of inertance tube without reservoir under variable frequency, variable length and diameter of inertance tube and variable pressure amplitude are investigated respectively. In addition, the authors used DeltaEC, a computer program to predict the performance of low-amplitude thermoacoustic engines, to simulate the effects of inertance tube without reservoir. According to the comparison of experiments and theoretical simulations, DeltaEC method is feasible and effective to direct and improve the design of inertance tubes.

  10. An electromagnetic inerter-based vibration suppression device

    NASA Astrophysics Data System (ADS)

    Gonzalez-Buelga, A.; Clare, L. R.; Neild, S. A.; Jiang, J. Z.; Inman, D. J.

    2015-05-01

    This paper describes how an inerter-based device for structural vibration suppression can be realized using an electromagnetic transducer such as a linear motor. When the motor shaft moves, a difference of voltage is generated across the transducer coil. The voltage difference is proportional to the relative velocity between its two terminals. The electromagnetic transducer will exert a force proportional to current following the Lorentz principle if the circuit is closed around the transducer coil. If an electronic circuit consisting of a capacitor, an inductance and a resistance with the appropriate configuration is connected, the resulting force reflected back into the mechanical domain is equivalent to that achieved by a mechanical inerter-based device. The proposed configuration is easy to implement and very versatile, provided a high quality conversion system with negligible losses. With the use of electromagnetic devices, a new generation of vibration absorbers can be realized, for example in the electrical domain it would be relatively uncomplicated to synthesize multi-frequency or real time tunable vibration absorbers by adding electrical components in parallel. In addition by using resistance emulators in the electrical circuits, part of the absorbed vibration energy can be converted into usable power. Here an electromagnetic tuned inerter damper (E-TID) is tested experimentally using real time dynamic substructuring. A voltage compensation unit was developed in order to compensate for coil losses. This voltage compensation unit requires power, which is acquired through harvesting from the vibration energy using a resistance emulator. A power balance analysis was developed in order to ensure the device can be self sufficient. Promising experimental results, using this approach, have been obtained and are presented in this paper. The ultimate goal of this research is the development of autonomous electromagnetic vibration absorbers, able to harvest energy

  11. Hard-sphere kinetic models for inert and reactive mixtures.

    PubMed

    Polewczak, Jacek

    2016-10-19

    I consider stochastic variants of a simple reacting sphere (SRS) kinetic model (Xystris and Dahler 1978 J. Chem. Phys. 68 387-401, Qin and Dahler 1995 J. Chem. Phys. 103 725-50, Dahler and Qin 2003 J. Chem. Phys. 118 8396-404) for dense reacting mixtures. In contrast to the line-of-center models of chemical reactive models, in the SRS kinetic model, the microscopic reversibility (detailed balance) can be easily shown to be satisfied, and thus all mathematical aspects of the model can be fully justified. In the SRS model, the molecules behave as if they were single mass points with two internal states. Collisions may alter the internal states of the molecules, and this occurs when the kinetic energy associated with the reactive motion exceeds the activation energy. Reactive and non-reactive collision events are considered to be hard sphere-like. I consider a four component mixture A, B, A (*), B (*), in which the chemical reactions are of the type [Formula: see text], with A (*) and B (*) being distinct species from A and B. This work extends the joined works with George Stell to the kinetic models of dense inert and reactive mixtures. The idea of introducing smearing-type effect in the collisional process results in a new class of stochastic kinetic models for both inert and reactive mixtures. In this paper the important new mathematical properties of such systems of kinetic equations are proven. The new results for stochastic revised Enskog system for inert mixtures are also provided. PMID:27545341

  12. Inert Electrodes Program: Fiscal year 1990 annual report

    SciTech Connect

    Windisch, C.F. Jr; Strachan, D.M.

    1991-08-01

    The Inert Electrodes Program, conducted by Pacific Northwest Laboratory (PNL), involves improving the Hall-Heroult Cells used by the aluminum industry for the electrochemical production of aluminum. The PNL research centers on developing more energy-efficient, longer-lasting anodes, cathodes, and ancillary equipment. During the FY 1989 and FY 1990, preparations for the pilot cell test continued. Numerous unanticipated problems were encountered that delayed the test schedule. The delays resulted primarily from three factors: (1) modifications for anode design based on the results obtained from the prototype test (documented here); (2) difficulties in procuring a manufacturer for the cermet inert anodes to be used in the pilot cell; and (3) problems in the actual scale-up activities, both in the production of the ferrite powder and in the fabrication of the anodes themselves. Issues related to scaling up the fabrication of the anodes are still being addressed in FY 1991. Important accomplishments in FY 1989 and FY 1990 include the completion of laboratory cell tests in which the effects of current density, pre-corrosion, and silica content on anode performance were confirmed; the performance of tests that resulted in the identification of the reaction layer on cermet anodes; the initiation of electrochemical tests to determine the source of the anode impedance; the completion of studies to identify and summarize optimal fabrication conditions for the cermet inert anodes, including advanced compositions; the testing of anodes with advanced composition; the refinement of the electrical connection for the anode; and modeling the dynamics of the anode array to be used in the pilot cell. 15 refs., 23 figs.

  13. Methanol Droplet Combustion in Oxygen-Inert Environments in Microgravity

    NASA Technical Reports Server (NTRS)

    Nayagam, Vedha; Dietrich, Daniel L.; Hicks, Michael C.; Williams, Forman A.

    2013-01-01

    The Flame Extinguishment (FLEX) experiment that is currently underway in the Combustion Integrated Rack facility onboard the International Space Station is aimed at understanding the effects of inert diluents on the flammability of condensed phase fuels. To this end, droplets of various fuels, including alkanes and alcohols, are burned in a quiescent microgravity environment with varying amounts of oxygen and inert diluents to determine the limiting oxygen index (LOI) for these fuels. In this study we report experimental observations of methanol droplets burning in oxygen-nitrogen-carbon dioxide and oxygen-nitrogen-helium gas mixtures at 0.7 and 1 atmospheric pressures. The initial droplet size varied between approximately 1.5 mm and 4 mm to capture both diffusive extinction brought about by insufficient residence time at the flame and radiative extinction caused by excessive heat loss from the flame zone. The ambient oxygen concentration varied from a high value of 30% by volume to as low as 12%, approaching the limiting oxygen index for the fuel. The inert dilution by carbon dioxide and helium varied over a range of 0% to 70% by volume. In these experiments, both freely floated and tethered droplets were ignited using symmetrically opposed hot-wire igniters and the burning histories were recorded onboard using digital cameras, downlinked later to the ground for analysis. The digital images yielded droplet and flame diameters as functions of time and subsequently droplet burning rate, flame standoff ratio, and initial and extinction droplet diameters. Simplified theoretical models correlate the measured burning rate constant and the flame standoff ratio reasonably well. An activation energy asymptotic theory accounting for time-dependent water dissolution or evaporation from the droplet is shown to predict the measured diffusive extinction conditions well. The experiments also show that the limiting oxygen index for methanol in these diluent gases is around 12% to

  14. Inert Anode Life in Low Temperature Reduction Process

    SciTech Connect

    Bradford, Donald R.

    2005-06-30

    The production of aluminum metal by low temperature electrolysis utilizing metal non-consumable anodes and ceramic cathodes was extensively investigated. Tests were performed with traditional sodium fluoride--aluminum fluoride composition electrolytes, potassium fluoride-- aluminum fluoride electrolytes, and potassium fluoride--sodium fluoride--aluminum fluoride electrolytes. All of the Essential First-Tier Requirements of the joint DOE-Aluminum Industry Inert Anode Road Map were achieved and those items yet to be resolved for commercialization of this technology were identified. Methods for the fabrication and welding of metal alloy anodes were developed and tested. The potential savings of energy and energy costs were determined and potential environmental benefits verified.

  15. Coating crystalline nuclear waste forms to improve inertness

    SciTech Connect

    Stinton, D.P.; Angelini, P.; Caputo, A.J.; Lackey, W.J.

    1981-01-01

    Crystalline waste forms of high simulated waste loading were successfully coated with layers of pyrolytic carbon and silicon carbide. Sol-gel technology was used to produce microspheres that contained simulated waste. A separate process for cesium immobilization was developed, which loads 5 wt % Cs onto zeolite particles for subsequent coating. The chemical vapor deposition process was developed for depositing thin layers of carbon and silicon carbide onto particles in a fluidized-bed coater. Pyrolytic carbon-coated particles were extremely inert in numerous leach tests. Aqueous leach test results of coated waste forms were below detection limits of such sensitive analytical techniques as atomic absorption and inductively coupled plasma atomic emission.

  16. Separation of Nuclear Fuel Surrogates from Silicon Carbide Inert Matrix

    SciTech Connect

    Dr. Ronald Baney

    2008-12-15

    The objective of this project has been to identify a process for separating transuranic species from silicon carbide (SiC). Silicon carbide has become one of the prime candidates for the matrix in inert matrix fuels, (IMF) being designed to reduce plutonium inventories and the long half-lives actinides through transmutation since complete reaction is not practical it become necessary to separate the non-transmuted materials from the silicon carbide matrix for ultimate reprocessing. This work reports a method for that required process.l

  17. Polyvinyl alcohol battery separator containing inert filler. [alkaline batteries

    NASA Technical Reports Server (NTRS)

    Sheibley, D. W.; Hsu, L. C.; Manzo, M. A. (Inventor)

    1981-01-01

    A cross-linked polyvinyl alcohol battery separator is disclosed. A particulate filler, inert to alkaline electrolyte of an alkaline battery, is incorporated in the separator in an amount of 1-20% by weight, based on the weight of the polyvinyl alcohol, and is dispersed throughout the product. Incorporation of the filler enhances performance and increases cycle life of alkaline batteries when compared with batteries containing a similar separator not containing filler. Suitable fillers include titanates, silicates, zirconates, aluminates, wood floor, lignin, and titania. Particle size is not greater than about 50 microns.

  18. Inert scalar dark matter in an extra dimension inspired model

    SciTech Connect

    Lineros, R.A.; Santos, F.A. Pereira dos E-mail: fabio.alex@fis.puc-rio.br

    2014-10-01

    In this paper we analyze a dark matter model inspired by theories with extra dimensions. The dark matter candidate corresponds to the first Kaluza–Klein mode of an real scalar added to the Standard Model. The tower of new particles enriches the calculation of the relic abundance. For large mass splitting, the model converges to the predictions of the inert singlet dark matter model. For nearly degenerate mass spectrum, coannihilations increase the cross-sections used for direct and indirect dark matter searches. Moreover, the Kaluza–Klein zero mode can mix with the SM higgs and further constraints can be applied.

  19. Testing New Inert Matrix and Thoria Fuels for Plutonium Incineration

    SciTech Connect

    Vettraino, F.; Padovan, E.; Tverberg, T.

    2002-07-01

    One major issue for nuclear power continues to be the public concern about rad-waste and proliferation risk induced by large plutonium stockpiles accumulated worldwide. In this context, nuclear fuels which exhibit no-plutonium production, and possibly allow for an efficient utilization of the plutonium to get rid of, are of great interest. This is the basic reason for the efforts that many international institutions are devoting to R and D on such new U-free fuel concepts as Inert Matrix (IMF) and Thorium fuels. At the moment the major merit of such innovative fuels is primarily related to the safe closure of the nuclear fuel cycle as especially expected from those new concepts like ADS (Accelerated Driven System) for the transmutation of plutonium, minor actinides and LLFP. Both ceramic inert matrix (IM) and thoria (T) fuels have been identified as suitable to the scope of burning weapon and civilian plutonium and to act also as possible carrier for transmutation of minor actinides. For testing the irradiation behaviour of these new materials, three kinds of fuels have been selected: inert matrix (IM) fuel, inert matrix thoria-doped (IMT) fuel, and thoria (T) fuel. A first experiment, IFA-652, 40 MWD/kg burnup target, including high enriched uranium (HEU) as fissile phase, instead of plutonium, is currently underway in the Halden HWBR. The reason for this choice was that manufacturing of Pu containing fuels is more complex and there was no fabrication facility available at the needed time for the Pu fuel. It is expected, however, that the relative behaviour of the different kind of matrices would be only slightly dependent on the adopted fissile material. So, the comparison of the in-pile performance of the three fuels will constitute a significant common database also for plutonium bearing fuels. The primary aim for the IFA-652 experiment is the measurement of basic characteristics under LWR irradiation conditions over a period of 4-5 years. The design of a

  20. Nuclear Technology. Course 28: Welding Inspection. Module 28-3, Tungsten Inert Gas (TIG), Metal Inert Gas (MIG) and Submerged Arc Welding.

    ERIC Educational Resources Information Center

    Espy, John

    This third in a series of ten modules for a course titled Welding Inspection presents the apparatus, process techniques, procedures, applications, associated defects, and inspection for the tungsten inert gas, metal inert gas, and submerged arc welding processes. The module follows a typical format that includes the following sections: (1)…

  1. IDMS: inert dark matter model with a complex singlet

    NASA Astrophysics Data System (ADS)

    Bonilla, Cesar; Sokolowska, Dorota; Darvishi, Neda; Diaz-Cruz, J. Lorenzo; Krawczyk, Maria

    2016-06-01

    We study an extension of the inert doublet model (IDM) that includes an extra complex singlet of the scalars fields, which we call the IDMS. In this model there are three Higgs particles, among them a SM-like Higgs particle, and the lightest neutral scalar, from the inert sector, remains a viable dark matter (DM) candidate. We assume a non-zero complex vacuum expectation value for the singlet, so that the visible sector can introduce extra sources of CP violation. We construct the scalar potential of IDMS, assuming an exact Z 2 symmetry, with the new singlet being Z 2-even, as well as a softly broken U(1) symmetry, which allows a reduced number of free parameters in the potential. In this paper we explore the foundations of the model, in particular the masses and interactions of scalar particles for a few benchmark scenarios. Constraints from collider physics, in particular from the Higgs signal observed at the Large Hadron Collider with {M}h≈ 125 {{GeV}}, as well as constraints from the DM experiments, such as relic density measurements and direct detection limits, are included in the analysis. We observe significant differences with respect to the IDM in relic density values from additional annihilation channels, interference and resonance effects due to the extended Higgs sector.

  2. Isentropic Compression of Multicomponent Mixtures of Fuels and Inert Gases

    NASA Technical Reports Server (NTRS)

    Barragan, Michelle; Julien, Howard L.; Woods, Stephen S.; Wilson, D. Bruce; Saulsberry, Regor L.

    2000-01-01

    In selected aerospace applications of the fuels hydrazine and monomethythydrazine, there occur conditions which can result in the isentropic compression of a multicomponent mixture of fuel and inert gas. One such example is when a driver gas such as helium comes out of solution and mixes with the fuel vapor, which is being compressed. A second example is when product gas from an energetic device mixes with the fuel vapor which is being compressed. Thermodynamic analysis has shown that under isentropic compression, the fuels hydrazine and monomethylhydrazine must be treated as real fluids using appropriate equations of state. The appropriate equations of state are the Peng-Robinson equation of state for hydrazine and the Redlich-Kwong-Soave equation of state for monomethylhydrazine. The addition of an inert gas of variable quantity and input temperature and pressure to the fuel compounds the problem for safety design or analysis. This work provides the appropriate thermodynamic analysis of isentropic compression of the two examples cited. In addition to an entropy balance describing the change of state, an enthalpy balance is required. The presence of multicomponents in the system requires that appropriate mixing rules are identified and applied to the analysis. This analysis is not currently available.

  3. Inert dark matter and strong electroweak phase transition

    NASA Astrophysics Data System (ADS)

    Gil, Grzegorz; Chankowski, Piotr; Krawczyk, Maria

    2012-10-01

    The main virtue of the Inert Doublet Model (IDM) is that one of its spinless neutral bosons can play the role of Dark Matter. Assuming that the additional sources of CP violation are present in the form of higher dimensional operator(s) we reexamine the possibility that the model parameters for which the right number density of relic particles is predicted are compatible with the first-order phase transition that could lead to electroweak baryogenesis. We find, taking into account recent indications from the LHC and the constraints from the electroweak precision data, that for a light DM (40-60 GeV) particle H0 and heavy, almost degenerate additional scalars H± and A0 this is indeed possible but the two parameters most important for the strength of the phase transition: the common mass of H± and A0 and the trilinear coupling of the Higgs particle h0 to DM are then strongly constrained. H± and A0 must weight less than ∼ 440 GeV if the inert minimum is to be the lowest one and the value of the h0H0H0 coupling is limited by the XENON 100 data. We stress the important role of the zero-temperature part of the effective potential for the strength of the phase transition.

  4. Teflon films for chemically-inert microfluidic valves and pumps.

    PubMed

    Grover, William H; von Muhlen, Marcio G; Manalis, Scott R

    2008-06-01

    We present a simple method for fabricating chemically-inert Teflon microfluidic valves and pumps in glass microfluidic devices. These structures are modeled after monolithic membrane valves and pumps that utilize a featureless polydimethylsiloxane (PDMS) membrane bonded between two etched glass wafers. The limited chemical compatibility of PDMS has necessitated research into alternative materials for microfluidic devices. Previous work has shown that spin-coated amorphous fluoropolymers and Teflon-fluoropolymer laminates can be fabricated and substituted for PDMS in monolithic membrane valves and pumps for space flight applications. However, the complex process for fabricating these spin-coated Teflon films and laminates may preclude their use in many research and manufacturing contexts. As an alternative, we show that commercially-available fluorinated ethylene-propylene (FEP) Teflon films can be used to fabricate chemically-inert monolithic membrane valves and pumps in glass microfluidic devices. The FEP Teflon valves and pumps presented here are simple to fabricate, function similarly to their PDMS counterparts, maintain their performance over extended use, and are resistant to virtually all chemicals. These structures should facilitate lab-on-a-chip research involving a vast array of chemistries that are incompatible with native PDMS microfluidic devices. PMID:18497911

  5. Effect of inerts on layer ignition temperatures of coal dust

    SciTech Connect

    Reddy, P.D.; Amyotte, P.R.; Pegg, M.J.

    1998-07-01

    An experimental study into the hot surface ignition of coal dust layers has been conducted. Two coals were examined: Prince coal from the Cape Breton Development Corporation and Pittsburgh coal from the United States Bureau of Mines. The effect of admixed inerts (dolomite and limestone) on the dust layer ignition temperature has been analyzed using a steady-state thermal explosion model. The analytical procedure used for evaluating the ignition temperature of a dust layer, heated from below and losing heat from its upper surface by convection, is an extension of the thermal explosion model of Thomas; namely, that of Thomas and Bowes. To commission the hot plate apparatus and validate the model predictions, a series of experiments were undertaken using sodium dithionite. This material is known to exhibit self-heating and there have been previous layer ignition temperature studies with which to compare results. It was demonstrated that an adequate estimate of the critical ignition temperature may be readily obtained by this analytical method. Furthermore, computed values of the critical ignition parameters for layers of coal dust admixed with inerts, accounting for changes in thermal conductivity, were in reasonable agreement with experimentally determined values.

  6. Production of light oil by injection of hot inert gas

    NASA Astrophysics Data System (ADS)

    Ruidas, Bidhan C.; Ganguly, Somenath

    2016-05-01

    Hot inert gas, when injected into an oil reservoir is capable of generating a vaporization-condensation drive and as a consequence, a preferential movement of the lighter components to the production well. This form of displacement is an important unit mechanism in hot flue-gas injection, or in thermal recovery from a watered-out oil reservoir. This article presents the movement of heat front vis-à-vis the changes in the saturation profile, and the gas-phase composition. The plateau in the temperature profile due to the exchange of latent heat, and the formation of water bank at the downstream are elaborated. The broadening of the vaporization-condensation zone with continued progression is discussed. The effect of inert gas temperature on the cumulative production of oil is reviewed. The results provide insight to the vaporization-condensation drive as a stand-alone mechanism. The paper underscores the relative importance of this mechanism, when operated in tandem with other processes in improved oil recovery and CO2 sequestration.

  7. Dynamics of galloping detonations: inert hydrodynamics with pulsed energy release

    NASA Astrophysics Data System (ADS)

    Radulescu, Matei I.; Shepherd, Joseph E.

    2015-11-01

    Previous models for galloping and cellular detonations of Ulyanitski, Vasil'ev and Higgins assume that the unit shock decay or cell can be modeled by Taylor-Sedov blast waves. We revisit this concept for galloping detonations, which we model as purely inert hydrodynamics with periodically pulsed energy deposition. At periodic time intervals, the chemical energy of the non-reacted gas accumulating between the lead shock and the contact surface separating reacted and non reacted gas is released nearly instantaneously. In between these pulses, the gas evolves as an inert medium. The resulting response of the gas to the periodic forcing is a sudden gain in pressure followed by mechanical relaxation accompanied by strong shock waves driven both forward and backwards. It is shown that the decay of the lead shock in-between pulses follows an exponential decay, whose time constant is controlled by the frequency of the energy deposition. More-over, the average speed of the lead shock is found to agree within 2 percent to the ideal Chapman-Jouguet value, while the large scale dynamics of the wave follows closely the ideal wave form of a CJ wave trailed by a Taylor expansion. When friction and heat losses are accounted for, velocity deficits are predicted, consistent with experiment. Work performed while MIR was on sabbatical at Caltech.

  8. Probing the inert doublet dark matter model with Cherenkov telescopes

    NASA Astrophysics Data System (ADS)

    Garcia-Cely, Camilo; Gustafsson, Michael; Ibarra, Alejandro

    2016-02-01

    We present a detailed study of the annihilation signals of the inert dark matter doublet model in its high mass regime. Concretely, we study the prospects to observe gamma-ray signals of the model in current and projected Cherenkov telescopes taking into account the Sommerfeld effect and including the contribution to the spectrum from gamma-ray lines as well as from internal bremsstrahlung. We show that present observations of the galactic center by the H.E.S.S. instrument are able to exclude regions of the parameter space that give the correct dark matter relic abundance. In particular, models with the charged and the neutral components of the inert doublet nearly degenerate in mass have strong gamma-ray signals. Furthermore, for dark matter particle masses above 1 TeV, we find that the non-observation of the continuum of photons generated by the hadronization of the annihilation products typically give stronger constraints on the model parameters than the sharp spectral features associated to annihilation into monochromatic photons and the internal bremsstrahlung process. Lastly, we also analyze the interplay between indirect and direct detection searches for this model, concluding that the prospects for the former are more promising. In particular, we find that the upcoming Cherenkov Telescope Array will be able to probe a significant part of the high mass regime of the model.

  9. Moving in extreme environments: inert gas narcosis and underwater activities.

    PubMed

    Clark, James E

    2015-01-01

    Exposure to the underwater environment for pleasure or work poses many challenges on the human body including thermal stress, barotraumas, decompression sickness as well as the acute effects of breathing gases under pressure. With the popularity of recreational self-contained underwater breathing apparatus (SCUBA) diving on the increase and deep inland dive sites becoming more accessible, it is important that we understand the effects of breathing pressurised gas at depth can have on the body. One of the common consequences of hyperbaric gas is the narcotic effect of inert gas. Nitrogen (a major component of air) under pressure can impede mental function and physical performance at depths of as little as 10 m underwater. With increased depth, symptoms can worsen to include confusion, disturbed coordination, lack of concentration, hallucinations and unconsciousness. Narcosis has been shown to contribute directly to up to 6% of deaths in divers and is likely to be indirectly associated with other diving incidents at depth. This article explores inert gas narcosis, the effect on divers' movement and function underwater and the proposed physiological mechanisms. Also discussed are some of the factors that affect the susceptibility of divers to the condition. In conclusion, understanding the cause of this potentially debilitating problem is important to ensure that safe diving practices continue. PMID:25713701

  10. The Gaseous Explosive Reaction : The Effect of Inert Gases

    NASA Technical Reports Server (NTRS)

    Stevens, F W

    1928-01-01

    Attention is called in this report to previous investigations of gaseous explosive reactions carried out under constant volume conditions, where the effect of inert gases on the thermodynamic equilibrium was determined. The advantage of constant pressure methods over those of constant volume as applied to studies of the gaseous explosive reaction is pointed out and the possibility of realizing for this purpose a constant pressure bomb mentioned. The application of constant pressure methods to the study of gaseous explosive reactions, made possible by the use of a constant pressure bomb, led to the discovery of an important kinetic relation connecting the rate of propagation of the zone of explosive reaction within the active gases, with the initial concentrations of those gases: s = K(sub 1)(A)(sup n1)(B)(sup n2)(C)(sup n3)------. By a method analogous to that followed in determining the effect of inert gases on the equilibrium constant K, the present paper records an attempt to determine their kinetic effect upon the expression given above.

  11. 19 CFR 111.32 - False information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false False information. 111.32 Section 111.32 Customs... CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.32 False information. A broker must... procure the giving of, any false or misleading information or testimony in any matter pending before...

  12. Cytogenetic studies of stainless steel welders using the tungsten inert gas and metal inert gas methods for welding.

    PubMed

    Jelmert, O; Hansteen, I L; Langård, S

    1995-03-01

    Cytogenetic damage was studied in lymphocytes from 23 welders using the Tungsten Inert Gas (TIG), and 21 welders using the Metal Inert Gas (MIG) and/or Metal Active Gas (MAG) methods on stainless steel (SS). A matched reference group I, and a larger reference group II of 94 subjects studied during the same time period, was established for comparison. Whole blood conventional cultures (CC), cultures in which DNA synthesis and repair were inhibited (IC), and the sister chromatid exchange (SCE) assay were applied in the study. For the CC a statistically significant decrease in chromosome breaks and cells with aberrations was found for both TIG/SS and MIG/MAG/SS welders when compared with reference group II. A non-significant decrease was found for the corresponding parameters for the two groups of welders when compared with their matched referents. A statistically significant negative association was found between measurements of total chromium (Cr) in inhaled air and SCE, and a weaker negative correlation with hexavalent Cr (Cr(VI)) in air. In conclusion, no cytogenetic damage was found in welders exposed to the TIG/SS and MIG/MAG/SS welding fumes with low content of Cr and Ni. On the contrary, a decline in the prevalence of chromosomal aberrations was indicated in the TIG/SS and MIG/MAG/SS welders, possibly related to the suggested enhancement of DNA repair capacity at slightly elevated exposures. PMID:7885396

  13. The intelligent control of an inert-gas atomization process

    NASA Astrophysics Data System (ADS)

    Osella, S. A.; Ridder, S. D.; Biancaniello, F. S.; Espina, P. I.

    1991-01-01

    Intelligent control is an attempt to specify the function of a controller in ways which mimic the decision-making capabilities of humans. Traditionally, issues relating to the emulation of human-like capabilities have fallen in the domain of artificial intelligence. Intelligent processing is a specific form of intelligent control in which the system to be controlled is a process rather than the more conventional mechanical or electrical system. The National Institute of Standards and Technology's program on intelligent processing of metal powders is a multi-disciplinary research initiative investigating the application of intelligent control technologies to improve the state of the art of metal powder manufacturing. This paper reviews the design of the institute's supersonic inert-gas metal-atomizer control system.

  14. Processing of magnesia pyrochlore composites for inert matrix materials

    NASA Astrophysics Data System (ADS)

    Yates, S. J.; Xu, P.; Wang, J.; Tulenko, J. S.; Nino, J. C.

    2007-05-01

    Inert matrix (IM) materials for nuclear fuel in light water reactors must meet several critical requirements that include high temperature stability, good irradiation behaviour, high thermal conductivity, and hot water corrosion resistance. MgO possesses all of the necessary requirements for an ideal IM candidate, except hot water corrosion resistance. A composite approach is being investigated in order to improve the corrosion resistance of MgO, while simultaneously taking advantage of the high thermal conductivity of MgO and its ability to be reprocessed in nitric acid. MgO-pyrochlore composite compositions are fabricated based on neutronic property simulations for assessment as potential IM materials. The selected pyrochlore compositions are synthesized by both sol gel and solid state processing, and how composite processing affects the microstructure will be discussed. Among the multiple composite processing approaches investigated, ball milling produces the most homogeneous and consistent microstructures.

  15. Inert scalars and vacuum metastability around the electroweak scale

    NASA Astrophysics Data System (ADS)

    Świeżewska, Bogumiła

    2015-07-01

    We analyse effective potential around the electroweak (EW) scale in the Standard Model (SM) extended with a heavy scalar doublet. We show that the additional scalars can have a strong impact on vacuum stability. Although the additional heavy scalars may improve the behaviour of running Higgs self-coupling at large field values, we prove that they can destabilise the vacuum due to EW-scale effects. A new EW symmetry conserving minimum of the effective potential can appear rendering the electroweak symmetry breaking (EWSB) minimum meta- or unstable. However, for the case of the inert doublet model (IDM) with a 125 GeV Higgs boson we demonstrate that the parameter space region where the vacuum is meta- or unstable cannot be reconciled with the constraints from perturbative unitarity, electroweak precision tests (EWPT) and dark matter relic abundance measurements.

  16. Development of advanced inert-gas ion thrusters

    NASA Technical Reports Server (NTRS)

    Poeschel, R. L.

    1983-01-01

    Inert gas ion thruster technology offers the greatest potential for providing high specific impulse, low thrust, electric propulsion on large, Earth orbital spacecraft. The development of a thruster module that can be operated on xenon or argon propellant to produce 0.2 N of thrust at a specific impulse of 3000 sec with xenon propellant and at 6000 sec with argon propellant is described. The 30 cm diameter, laboratory model thruster is considered to be scalable to produce 0.5 N thrust. A high efficiency ring cusp discharge chamber was used to achieve an overall thruster efficiency of 77% with xenon propellant and 66% with argon propellant. Measurements were performed to identify ion production and loss processes and to define critical design criteria (at least on a preliminary basis).

  17. Analysis and optimisation for inerter-based isolators via fixed-point theory and algebraic solution

    NASA Astrophysics Data System (ADS)

    Hu, Yinlong; Chen, Michael Z. Q.; Shu, Zhan; Huang, Lixi

    2015-06-01

    This paper is concerned with the problem of analysis and optimisation of the inerter-based isolators based on a "uni-axial" single-degree-of-freedom isolation system. In the first part, in order to gain an in-depth understanding of inerter from the prospective of vibration, the frequency responses of both parallel-connected and series-connected inerters are analysed. In the second part, three other inerter-based isolators are introduced and the tuning procedures in both the H∞ optimisation and the H2 optimisation are proposed in an analytical manner. The achieved H2 and H∞ performance of the inerter-based isolators is superior to that achieved by the traditional dynamic vibration absorber (DVA) when the same inertance-to-mass (or mass) ratio is considered. Moreover, the inerter-based isolators have two unique properties, which are more attractive than the traditional DVA: first, the inertance-to-mass ratio of the inerter-based isolators can easily be larger than the mass ratio of the traditional DVA without increasing the physical mass of the whole system; second, there is no need to mount an additional mass on the object to be isolated.

  18. Unidentified Inert Ingredients in Pesticides: Implications for Human and Environmental Health

    PubMed Central

    Cox, Caroline; Surgan, Michael

    2006-01-01

    Background By statute or regulation in the United States and elsewhere, pesticide ingredients are divided into two categories: active and inert (sometimes referred to as other ingredients, adjuvants, or coformulants). Despite their name, inert ingredients may be biologically or chemically active and are labeled inert only because of their function in the formulated product. Most of the tests required to register a pesticide are performed with the active ingredient alone, not the full pesticide formulation. Inert ingredients are generally not identified on product labels and are often claimed to be confidential business information. Objectives In this commentary, we describe the shortcomings of the current procedures for assessing the hazards of pesticide formulations and demonstrate that inert ingredients can increase the toxicity of and potential exposure to pesticide formulations. Discussion Inert ingredients can increase the ability of pesticide formulations to affect significant toxicologic end points, including developmental neurotoxicity, genotoxicity, and disruption of hormone function. They can also increase exposure by increasing dermal absorption, decreasing the efficacy of protective clothing, and increasing environmental mobility and persistence. Inert ingredients can increase the phytotoxicity of pesticide formulations as well as the toxicity to fish, amphibians, and microorganisms. Conclusions Pesticide registration should require full assessment of formulations. Evaluations of pesticides under the National Environmental Policy Act, the Endangered Species Act, and similar statutes should include impact assessment of formulations. Environmental monitoring for pesticides should include inert ingredients. To enable independent research and risk assessment, inert ingredients should be identified on product labels. PMID:17185266

  19. Cold Inertance Tube for 4 K Stirling Type Pulse Tube Cryocoolers

    NASA Astrophysics Data System (ADS)

    Li, ZhuoPei; Gan, ZhiHua; Qiu, LiMin

    The losses in the regenerator are minimized when the amplitude of the mass flow is minimized for a given acoustic power which requires that the mass flow lags the pressure by about 30° at the cold end of regenerator. The phase shift provided by an inertance tube is strongly influenced by the temperature of the inertance tube and the acoustic power at the cold end of the regenerator. For a 4 K Stirling type pulse tube cryocooler, the acoustic power at the cold end of the regenerator decreases significantly with the temperature thereby it's difficult to achieve ideal phase relationship with ambient inertance tube. While cold inertance tube provide a larger phase shift in that the viscosity of the working fluid decreases and the density increases as the temperature decreases. However, use of cold inertance tube increases additional heat load to the regenerator. Therefore it's of great significance to determine when a cold inertance tube should be used. In this paper effect of temperature of inertance tube is calculated for a 4 K Stirling type pulse tube cryocooler with different acoustic powers at the cold end. A comparison of ambient temperature inertance tube and cold inertance tube is made.

  20. 20 CFR 356.3 - False claims.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false False claims. 356.3 Section 356.3 Employees' Benefits RAILROAD RETIREMENT BOARD ADMINISTRATIVE REMEDIES FOR FRAUDULENT CLAIMS OR STATEMENTS CIVIL MONETARY PENALTY INFLATION ADJUSTMENT § 356.3 False claims. In the case of penalties assessed under 31...

  1. 20 CFR 356.3 - False claims.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false False claims. 356.3 Section 356.3 Employees' Benefits RAILROAD RETIREMENT BOARD ADMINISTRATIVE REMEDIES FOR FRAUDULENT CLAIMS OR STATEMENTS CIVIL MONETARY PENALTY INFLATION ADJUSTMENT § 356.3 False claims. In the case of penalties assessed under 31...

  2. 20 CFR 356.3 - False claims.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false False claims. 356.3 Section 356.3 Employees' Benefits RAILROAD RETIREMENT BOARD ADMINISTRATIVE REMEDIES FOR FRAUDULENT CLAIMS OR STATEMENTS CIVIL MONETARY PENALTY INFLATION ADJUSTMENT § 356.3 False claims. In the case of penalties assessed under 31...

  3. An Association Account of False Belief Understanding

    ERIC Educational Resources Information Center

    De Bruin, L. C.; Newen, A.

    2012-01-01

    The elicited-response false belief task has traditionally been considered as reliably indicating that children acquire an understanding of false belief around 4 years of age. However, recent investigations using spontaneous-response tasks suggest that false belief understanding emerges much earlier. This leads to a developmental paradox: if young…

  4. 30 CFR 281.5 - False statements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false False statements. 281.5 Section 281.5 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE LEASING OF MINERALS OTHER THAN OIL, GAS, AND SULPHUR IN THE OUTER CONTINENTAL SHELF General § 281.5 False statements. Under...

  5. 47 CFR 54.522 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 3 2011-10-01 2011-10-01 false 54.522 Section 54.522 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) UNIVERSAL SERVICE Universal Service Support for Schools and Libraries §...

  6. 47 CFR 54.517 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 3 2011-10-01 2011-10-01 false 54.517 Section 54.517 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) UNIVERSAL SERVICE Universal Service Support for Schools and Libraries §...

  7. 47 CFR 54.506 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 3 2011-10-01 2011-10-01 false 54.506 Section 54.506 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) UNIVERSAL SERVICE Universal Service Support for Schools and Libraries §...

  8. 48 CFR 1315.407 - Special cost or pricing areas.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Special cost or pricing... CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 1315.407 Special cost or pricing areas....

  9. 48 CFR 1815.403 - Obtaining cost or pricing data.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Obtaining cost or pricing... ADMINISTRATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 1815.403 Obtaining cost or pricing data....

  10. 48 CFR 15.407 - Special cost or pricing areas.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Special cost or pricing... CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 15.407 Special cost or pricing areas....

  11. 48 CFR 1815.407 - Special cost or pricing areas.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Special cost or pricing... ADMINISTRATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 1815.407 Special cost or pricing areas....

  12. 48 CFR 1219.1005 - Applicability.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Applicability. 1219.1005 Section 1219.1005 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Small Business Competitiveness Demonstration Program...

  13. 42 CFR 37.50 - Interpreting and classifying chest roentgenograms.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Interpreting and classifying chest roentgenograms... MEDICAL CARE AND EXAMINATIONS SPECIFICATIONS FOR MEDICAL EXAMINATIONS OF UNDERGROUND COAL MINERS Chest Roentgenographic Examinations Specifications for Interpretation, Classification, and Submission of...

  14. 48 CFR 53.301-1423 - Inventory Verification Survey.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false Inventory Verification Survey. 53.301-1423 Section 53.301-1423 Federal Acquisition Regulations System FEDERAL ACQUISITION... Survey. ER05AP04.000...

  15. 48 CFR 970.0404 - Safeguarding classified information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Safeguarding classified information. 970.0404 Section 970.0404 Federal Acquisition Regulations System DEPARTMENT OF ENERGY AGENCY... classified information....

  16. 48 CFR 914.409-2 - Award of classified contracts.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... classified contracts. DOE regulations regarding the safeguarding of restricted data and procedures for its destruction are contained at 10 CFR part 1016. ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Award of...

  17. 50 CFR 665.99 - Area restrictions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 11 2011-10-01 2011-10-01 false Area restrictions. 665.99 Section 665.99 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION... Ocean Survey Chart Number 83484....

  18. 48 CFR 27.204 - Patented technology under trade agreements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Patented technology under trade agreements. 27.204 Section 27.204 Federal Acquisition Regulations System FEDERAL ACQUISITION... Patented technology under trade agreements....

  19. 48 CFR 225.7005 - Restriction on certain chemical weapons antidote.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Restriction on certain chemical weapons antidote. 225.7005 Section 225.7005 Federal Acquisition Regulations System DEFENSE... on certain chemical weapons antidote....

  20. 48 CFR 25.702 - Prohibition on contracting with entities that conduct restricted business operations in Sudan.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Prohibition on contracting with entities that conduct restricted business operations in Sudan. 25.702 Section 25.702 Federal... operations in Sudan....

  1. 48 CFR 3017.204 - Contracts.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Contracts. 3017.204... ACQUISITION REGULATION (HSAR) CONTRACT METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Options. 3017.204 Contracts....

  2. 48 CFR 1.602 - Contracting officers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contracting officers. 1... FEDERAL ACQUISITION REGULATIONS SYSTEM Career Development, Contracting Authority, and Responsibilities 1.602 Contracting officers....

  3. 48 CFR 19.808 - Contract negotiation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contract negotiation. 19... PROGRAMS SMALL BUSINESS PROGRAMS Contracting With the Small Business Administration (the 8(a) Program) 19.808 Contract negotiation....

  4. 48 CFR 215.404 - Proposal analysis.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Proposal analysis. 215.404 Section 215.404 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT... Proposal analysis....

  5. 49 CFR 236.764 - Locking, lever operated.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Locking, lever operated. 236.764 Section 236.764... Locking, lever operated. The mechanical locking of an interlocking machine which is actuated by means of the lever....

  6. 47 CFR 27.1221 - Interference protection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Interference protection. 27.1221 Section 27.1221 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES Broadband Radio Service and Educational Broadband...

  7. 47 CFR 27.1239 - Reimbursement obligation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Reimbursement obligation. 27.1239 Section 27.1239 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES Broadband Radio Service and Educational Broadband...

  8. 48 CFR 811.103 - Market acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Market acceptance. 811.103 Section 811.103 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS COMPETITION AND... acceptance....

  9. 48 CFR 619.804-3 - SBA acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false SBA acceptance. 619.804-3 Section 619.804-3 Federal Acquisition Regulations System DEPARTMENT OF STATE SOCIOECONOMIC PROGRAMS SMALL... acceptance....

  10. 48 CFR 619.804 - Evaluation, offering, and acceptance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Evaluation, offering, and acceptance. 619.804 Section 619.804 Federal Acquisition Regulations System DEPARTMENT OF STATE SOCIOECONOMIC....804 Evaluation, offering, and acceptance....

  11. 48 CFR 225.7102 - Forgings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Forgings. 225.7102 Section 225.7102 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF... Forgings....

  12. 49 CFR 178.33a - Specification 2Q; inner nonrefillable metal receptacles.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Specification 2Q; inner nonrefillable metal receptacles. 178.33a Section 178.33a Transportation Other Regulations Relating to Transportation (Continued... nonrefillable metal receptacles....

  13. 49 CFR 178.33 - Specification 2P; inner nonrefillable metal receptacles.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Specification 2P; inner nonrefillable metal receptacles. 178.33 Section 178.33 Transportation Other Regulations Relating to Transportation (Continued... nonrefillable metal receptacles....

  14. 48 CFR 249.110 - Settlement negotiation memorandum.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Settlement negotiation... Settlement negotiation memorandum. Follow the procedures at PGI 249.110 for preparation of a settlement negotiation memorandum....

  15. 48 CFR 619.808 - Contract negotiation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Contract negotiation. 619.808 Section 619.808 Federal Acquisition Regulations System DEPARTMENT OF STATE SOCIOECONOMIC PROGRAMS... Contract negotiation....

  16. 48 CFR 836.606 - Negotiations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Negotiations. 836.606 Section 836.606 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS SPECIAL CATEGORIES... Negotiations....

  17. 48 CFR 212.7102 - Pilot program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... OF DEFENSE ACQUISITION PLANNING ACQUISITION OF COMMERCIAL ITEMS Pilot Program for Acquisition of Military-Purpose Nondevelopmental Items 212.7102 Pilot program. ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Pilot program....

  18. 48 CFR 239.7408 - Special construction.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Special construction. 239.7408 Section 239.7408 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... Telecommunications Services 239.7408 Special construction....

  19. 48 CFR 211.204 - Solicitation provisions and contract clauses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Acquisition Streamlining and Standardization Information System database, use provisions, as appropriate... Descriptions Not Listed in the Acquisition Streamlining and Standardization Information System (ASSIST), and... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Solicitation...

  20. 48 CFR 209.104 - Standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Standards. 209.104 Section 209.104 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF... Standards....

  1. 48 CFR 4.501 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false 4.501 Section 4.501 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Electronic Commerce in Contracting 4.501...

  2. 49 CFR 236.731 - Controller, circuit.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Controller, circuit. A device for opening and closing electric circuits. ... 49 Transportation 4 2011-10-01 2011-10-01 false Controller, circuit. 236.731 Section 236.731 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD...

  3. 49 CFR 236.720 - Circuit, common return.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Circuit, common return. A term applied where one wire is used for the return of more than one electric circuit. ... 49 Transportation 4 2011-10-01 2011-10-01 false Circuit, common return. 236.720 Section...

  4. 48 CFR 204.7103 - Contract line items.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Contract line items. 204..., DEPARTMENT OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Uniform Contract Line Item Numbering System 204.7103 Contract line items....

  5. 48 CFR 204.7104 - Contract subline items.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Contract subline items... SYSTEM, DEPARTMENT OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Uniform Contract Line Item Numbering System 204.7104 Contract subline items....

  6. 48 CFR 922.804 - Affirmative action programs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Affirmative action programs. 922.804 Section 922.804 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SOCIOECONOMIC... Affirmative action programs....

  7. 48 CFR 1522.804 - Affirmative action programs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Affirmative action programs. 1522.804 Section 1522.804 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY....804 Affirmative action programs....

  8. 48 CFR 1422.804 - Affirmative action programs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Affirmative action programs. 1422.804 Section 1422.804 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR....804 Affirmative action programs....

  9. 49 CFR 229.17 - Accident reports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... CFR part 225. ... 49 Transportation 4 2011-10-01 2011-10-01 false Accident reports. 229.17 Section 229.17..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS General § 229.17 Accident reports. (a)...

  10. 47 CFR 15.321 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false 15.321 Section 15.321 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Unlicensed Personal Communications Service Devices § 15.321...

  11. 48 CFR 803.405 - Misrepresentations or violations of the Covenant Against Contingent Fees.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... referrals of suspected fraudulent or criminal matters to the Department of Justice under FAR 3.405(b)(4... the Department of Justice. ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Misrepresentations...

  12. 48 CFR 25.703 - Prohibition on contracting with entities that engage in certain activities relating to Iran.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Prohibition on contracting with entities that engage in certain activities relating to Iran. 25.703 Section 25.703 Federal... to Iran....

  13. 48 CFR 1511.011-79 - Information resources management.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Information resources... AGENCY ACQUISITION PLANNING DESCRIBING AGENCY NEEDS 1511.011-79 Information resources management. The... Resource Management, in all solicitations and contracts....

  14. 48 CFR 232.503 - Postaward matters.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Postaward matters. 232.503 Section 232.503 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT....503 Postaward matters....

  15. 48 CFR 232.502 - Preaward matters.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Preaward matters. 232.502 Section 232.502 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT....502 Preaward matters....

  16. 48 CFR 1803.104 - Procurement integrity.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Procurement integrity. 1803.104 Section 1803.104 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND SPACE... Procurement integrity....

  17. 48 CFR 203.104 - Procurement integrity.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Procurement integrity. 203.104 Section 203.104 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM....104 Procurement integrity....

  18. 49 CFR 178.348 - Specification DOT 412; cargo tank motor vehicle.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Specification DOT 412; cargo tank motor vehicle...) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.348 Specification DOT 412; cargo tank motor vehicle....

  19. 49 CFR 178.346 - Specification DOT 406; cargo tank motor vehicle.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Specification DOT 406; cargo tank motor vehicle...) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.346 Specification DOT 406; cargo tank motor vehicle....

  20. 48 CFR 970.2201-2 - Overtime management.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Overtime management. 970... SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Application of Labor Policies 970.2201-2 Overtime management....

  1. 48 CFR 970.3770 - Facilities management.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Facilities management. 970... REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Facilities Management Contracting 970.3770 Facilities management....

  2. 42 CFR 485.58 - Condition of participation: Comprehensive rehabilitation program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false Condition of participation: Comprehensive... OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION CONDITIONS OF PARTICIPATION: SPECIALIZED PROVIDERS Conditions of Participation: Comprehensive Outpatient Rehabilitation Facilities §...

  3. 48 CFR 871.208 - Rehabilitation facilities.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Rehabilitation facilities... DEPARTMENT SUPPLEMENTARY REGULATIONS LOAN GUARANTY AND VOCATIONAL REHABILITATION AND EMPLOYMENT PROGRAMS Vocational Rehabilitation and Employment Service 871.208 Rehabilitation facilities. Charges by...

  4. 48 CFR 236.206 - Liquidated damages.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Liquidated damages. 236... Aspects of Contracting for Construction 236.206 Liquidated damages. See 211.503 for instructions on use of liquidated damages....

  5. 49 CFR 236.337 - Locking faces of mechanical locking; fit.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Locking faces of mechanical locking; fit. 236.337... Rules and Instructions § 236.337 Locking faces of mechanical locking; fit. Locking faces shall fit... face....

  6. 48 CFR 2001.101 - Purpose.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Acquisition Regulation (FAR) (48 CFR Chapter 1). ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Purpose. 2001.101 Section 2001.101 Federal Acquisition Regulations System NUCLEAR REGULATORY COMMISSION GENERAL...

  7. 48 CFR 970.35 - Research and development contracting.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Research and development contracting. 970.35 Section 970.35 Federal Acquisition Regulations System DEPARTMENT OF ENERGY AGENCY... development contracting....

  8. 43 CFR 2912.1 - Nature of interest.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Nature of interest. 2912.1 Section 2912.1 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Nature of interest....

  9. 48 CFR 2414.404 - Rejection of bids.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Rejection of bids. 2414.404 Section 2414.404 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN... 2414.404 Rejection of bids....

  10. 48 CFR 803.570 - Commercial advertising.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Commercial advertising. 803.570 Section 803.570 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL... Commercial advertising....

  11. 47 CFR 10.2 - Purpose.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Purpose. 10.2 Section 10.2 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL MOBILE ALERT SYSTEM General Information § 10.2... Mobile Alert System....

  12. 47 CFR 10.540 - Attestation requirement. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Attestation requirement. 10.540 Section 10.540 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL MOBILE ALERT SYSTEM Equipment Requirements § 10.540 Attestation requirement....

  13. 47 CFR 10.460 - Retransmission frequency. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Retransmission frequency. 10.460 Section 10.460 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL MOBILE ALERT SYSTEM Alert Message Requirements § 10.460 Retransmission frequency....

  14. 47 CFR 11.12 - Two-tone Attention Signal encoder and decoder.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Two-tone Attention Signal encoder and decoder. 11.12 Section 11.12 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL EMERGENCY ALERT... provide an audio alert....

  15. 47 CFR 1.1417 - Allocation of Unusable Space Costs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Allocation of Unusable Space Costs. 1.1417 Section 1.1417 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Pole... Management and Budget....

  16. 46 CFR 176.818 - Sanitary inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Sanitary inspection. 176.818 Section 176.818 Shipping...) INSPECTION AND CERTIFICATION Material Inspections § 176.818 Sanitary inspection. At each inspection for... sanitary condition....

  17. 47 CFR 74.643 - Interference to geostationary-satellites.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Interference to geostationary-satellites. 74... Television Broadcast Auxiliary Stations § 74.643 Interference to geostationary-satellites. Applicants and... geostationary-satellites....

  18. 47 CFR 80.333 - Stations in the maritime mobile-satellite service.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Stations in the maritime mobile-satellite..., Alarm, Urgency and Safety Procedures § 80.333 Stations in the maritime mobile-satellite service. The...-satellite service....

  19. 47 CFR 25.219 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false 25.219 Section 25.219 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Technical Standards § 25.219...

  20. 48 CFR 470.200 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false 470.200 Section 470.200 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE FOOD ASSISTANCE PROGRAMS COMMODITY ACQUISITIONS 470.200...

  1. 48 CFR 3009.570 - Limitations on contractors acting as lead system integrators.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Limitations on contractors acting as lead system integrators. 3009.570 Section 3009.570 Federal Acquisition Regulations System... contractors acting as lead system integrators....

  2. 47 CFR 73.3574 - Processing of international broadcast station applications.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Processing of international broadcast station... of international broadcast station applications. (a) Applications for International station... such amended application. (c) Applications for International stations will be processed as nearly...

  3. 47 CFR 76.227 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false 76.227 Section 76.227 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Cablecasting § 76.227...

  4. 48 CFR 952.204 - Clauses related to administrative matters.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Clauses related to administrative matters. 952.204 Section 952.204 Federal Acquisition Regulations System DEPARTMENT OF ENERGY... Clauses related to administrative matters....

  5. 42 CFR 5a.2 - Applicability.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Applicability. 5a.2 Section 5a.2 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS RURAL PHYSICIAN... Public Health Service Act....

  6. 48 CFR 209.104-4 - Subcontractor responsibility.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Responsible Prospective Contractors 209.104-4 Subcontractor responsibility. Generally, the Canadian Commercial Corporation... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false...

  7. 49 CFR 178.33b - Specification 2S; inner nonrefillable plastic receptacles.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Specification 2S; inner nonrefillable plastic receptacles. 178.33b Section 178.33b Transportation Other Regulations Relating to Transportation (Continued... nonrefillable plastic receptacles....

  8. 47 CFR 52.36 - Standard data fields for simple port order processing.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) Zip code; (4) Company code; (5) New network service provider; (6) Desired due date; (7) Purchase order... Office of Management and Budget. ... 47 Telecommunication 3 2011-10-01 2011-10-01 false Standard data fields for simple port...

  9. 43 CFR 3103.4 - Production incentives.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Production incentives. 3103.4 Section 3103.4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Production incentives....

  10. 48 CFR 970.3002 - CAS program requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false CAS program requirements. 970.3002 Section 970.3002 Federal Acquisition Regulations System DEPARTMENT OF ENERGY AGENCY....3002 CAS program requirements....

  11. 43 CFR 3103.1 - Payments.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Payments. 3103.1 Section 3103.1 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT... Payments....

  12. 48 CFR 3028.106 - Administration.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Administration. 3028.106 Section 3028.106 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY... 3028.106 Administration....

  13. 48 CFR 1825.003 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Definitions. 1825.003 Section 1825.003 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SOCIOECONOMIC PROGRAMS FOREIGN ACQUISITION 1825.003 Definitions....

  14. 48 CFR 242.705 - Final indirect cost rates.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Final indirect cost rates..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Indirect Cost Rates 242.705 Final indirect cost rates....

  15. 47 CFR 213.1 - Background and purpose.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Background and purpose. 213.1 Section 213.1 Telecommunication OFFICE OF SCIENCE AND TECHNOLOGY POLICY AND NATIONAL SECURITY COUNCIL GOVERNMENT AND PUBLIC... effect....

  16. 43 CFR 9268.5 - Wilderness management. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Wilderness management. 9268.5 Section 9268.5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Wilderness management....

  17. 48 CFR Appendixes G-H to Chapter 7 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false G Appendixes G-H to Chapter 7 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT Appendixes G-H to Chapter 7...

  18. 48 CFR 225.7703 - Acquisition of products or services other than small arms.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Acquisition of products or services other than small arms. 225.7703 Section 225.7703 Federal Acquisition Regulations System DEFENSE... than small arms....

  19. 47 CFR 10.300 - Alert aggregator. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Alert aggregator. 10.300 Section 10.300 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL MOBILE ALERT SYSTEM System Architecture § 10.300 Alert aggregator....

  20. 47 CFR 10.310 - Federal alert gateway. [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Federal alert gateway. 10.310 Section 10.310 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL MOBILE ALERT SYSTEM System Architecture § 10.310 Federal alert gateway....

  1. 48 CFR 243.204-70 - Definitization of change orders.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT CONTRACT MODIFICATIONS Change Orders 243.204-70 Definitization of change orders. ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Definitization of...

  2. 47 CFR 68.162 - Requirements for Telecommunication Certification Bodies.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... technical regulation interpretations. The competence of the telecommunication certification body shall be... 47 Telecommunication 3 2011-10-01 2011-10-01 false Requirements for Telecommunication Certification Bodies. 68.162 Section 68.162 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...

  3. 47 CFR 32.15 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false 32.15 Section 32.15 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES General Instructions § 32.15...

  4. 48 CFR 3032.006 - Reduction or suspension of contract payments upon finding of fraud.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Reduction or suspension of contract payments upon finding of fraud. 3032.006 Section 3032.006 Federal Acquisition Regulations System... finding of fraud....

  5. 48 CFR Appendix G to Chapter 2 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false G Appendix G to Chapter 2 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE Appendix G to Chapter 2...

  6. 48 CFR 1327.305 - Administration of patent rights clauses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Administration of patent... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1327.305 Administration of patent rights clauses....

  7. 48 CFR 1227.305 - Administration of patent rights clauses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Administration of patent... TRANSPORTATION GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1227.305 Administration of patent rights clauses....

  8. 48 CFR 27.201 - Patent and copyright infringement liability.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Patent and copyright... REGULATION GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patents and Copyrights 27.201 Patent and copyright infringement liability....

  9. 48 CFR 27.305 - Administration of patent rights clauses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Administration of patent... REGULATION GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights under Government Contracts 27.305 Administration of patent rights clauses....

  10. 48 CFR 2427.305 - Administration of patent rights clauses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Administration of patent... AND URBAN DEVELOPMENT SOCIOECONOMIC PROGRAMS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 2427.305 Administration of patent rights clauses....

  11. 48 CFR 1427.201 - Patent and copyright infringement liability.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Patent and copyright... INTERIOR GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patents and Copyrights 1427.201 Patent and copyright infringement liability....

  12. 48 CFR 970.0470 - Department of Energy Directives.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Department of Energy Directives. 970.0470 Section 970.0470 Federal Acquisition Regulations System DEPARTMENT OF ENERGY AGENCY... Energy Directives....

  13. 47 CFR 73.6023 - Distributed transmission systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Distributed transmission systems. 73.6023... RADIO BROADCAST SERVICES Class A Television Broadcast Stations § 73.6023 Distributed transmission... distributed transmission system....

  14. 46 CFR 184.704 - Marine sanitation devices.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 33 CFR part 159. ... 46 Shipping 7 2011-10-01 2011-10-01 false Marine sanitation devices. 184.704 Section 184.704... TONS) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 184.704 Marine...

  15. 48 CFR 1331.205 - Selected costs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Selected costs. 1331.205... REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 1331.205 Selected costs....

  16. 48 CFR 31.205 - Selected costs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Selected costs. 31.205... REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 31.205 Selected costs....

  17. 48 CFR 931.205 - Selected costs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Selected costs. 931.205... REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 931.205 Selected costs....

  18. 48 CFR 1231.205 - Selected costs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Selected costs. 1231.205... REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 1231.205 Selected costs....

  19. 46 CFR 196.05-5 - Charts and nautical publications.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 33 CFR 164.33. ... 46 Shipping 7 2011-10-01 2011-10-01 false Charts and nautical publications. 196.05-5 Section 196.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH...

  20. 46 CFR 385.2 - Scope.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Scope. 385.2 Section 385.2 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MISCELLANEOUS RESEARCH AND DEVELOPMENT GRANT AND COOPERATIVE..., exclusions, issuance, arrangement, publication, and exceptions....

  1. 43 CFR 1784.4 - Public participation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Public participation. 1784.4 Section 1784.4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Public participation....

  2. 46 CFR 54.05-25 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false 54.05-25 Section 54.05-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PRESSURE VESSELS Toughness Tests § 54.05-25...

  3. 48 CFR 209.406 - Debarment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Debarment. 209.406 Section... DEFENSE ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Debarment, Suspension, and Ineligibility 209.406 Debarment....

  4. 48 CFR 3409.406 - Debarment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Debarment. 3409.406... COMPETITION AND ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Debarment, Suspension, and Ineligibility 3409.406 Debarment....

  5. 48 CFR 570.117 - Sustainable requirements for lease acquisition.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Sustainable requirements... Sustainable requirements for lease acquisition. Contracting officers must include sustainable design...'s sustainable requirements identified in this part....

  6. 45 CFR 98.82 - Coordination.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... childhood development programs. ... 45 Public Welfare 1 2011-10-01 2011-10-01 false Coordination. 98.82 Section 98.82 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND Indian...

  7. 48 CFR 970.0370 - Management Controls and Improvements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Improper Business Practices and Personal Conflicts of Interest 970.0370 Management Controls and Improvements. ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Management Controls...

  8. 48 CFR 1545.309 - Providing Government production and research property under special restrictions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Regulations System ENVIRONMENTAL PROTECTION AGENCY CONTRACT MANAGEMENT GOVERNMENT PROPERTY Providing Government Property to Contractors 1545.309 Providing Government production and research property under... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Providing...

  9. 48 CFR 5416.203 - Fixed-price contracts with economic price adjustment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Fixed-price contracts with economic price adjustment. 5416.203 Section 5416.203 Federal Acquisition Regulations System DEFENSE... contracts with economic price adjustment....

  10. 49 CFR 220.21 - Railroad operating rules; radio communications; recordkeeping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... meaning given these terms in 49 CFR Part 1201. ... 49 Transportation 4 2011-10-01 2011-10-01 false Railroad operating rules; radio communications...) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD COMMUNICATIONS Radio and...

  11. 48 CFR 250.104 - Residual powers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Residual powers. 250.104 Section 250.104 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT... Contractual Actions 250.104 Residual powers....

  12. 48 CFR 970.5001 - Residual powers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Residual powers. 970.5001 Section 970.5001 Federal Acquisition Regulations System DEPARTMENT OF ENERGY AGENCY SUPPLEMENTARY....5001 Residual powers....

  13. 47 CFR 27.59 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false 27.59 Section 27.59 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES Technical Standards § 27.59...

  14. 47 CFR 27.15 - Geographic partitioning and spectrum disaggregation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Geographic partitioning and spectrum disaggregation. 27.15 Section 27.15 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES Applications and Licenses §...

  15. 45 CFR 690.121 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 3 2011-10-01 2011-10-01 false 690.121 Section 690.121 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION PROTECTION OF HUMAN SUBJECTS § 690.121...

  16. 48 CFR 1246.101 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Definitions. 1246.101 Section 1246.101 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION CONTRACT MANAGEMENT QUALITY ASSURANCE General 1246.101 Definitions....

  17. 47 CFR 80.109 - Transmission to a plurality of mobile stations by a public coast station.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Transmission to a plurality of mobile stations... Procedures Operating Procedures-Land Stations § 80.109 Transmission to a plurality of mobile stations by a... mobile stations....

  18. 49 CFR 374.315 - Transportation of passengers with disabilities.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... by the Secretary of Transportation (49 CFR parts 27, 37, and 38) and the Attorney General (28 CFR... Compliance Board (36 CFR part 1191). ... 49 Transportation 5 2011-10-01 2011-10-01 false Transportation of passengers with...

  19. 43 CFR 3120.7 - Future interest.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Future interest. 3120.7 Section 3120.7 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... interest....

  20. 48 CFR Appendix - Federal Acquisition Regulation (FAR) Index

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Federal Acquisition Regulation (FAR) Index Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT... (IFMS) Contract clause. FAR Index Federal Acquisition Regulation (FAR) Index Editorial Note:...

  1. 48 CFR 813.302 - Purchase orders.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Purchase orders. 813.302 Section 813.302 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS CONTRACTING METHODS... orders....

  2. 48 CFR 619.402 - Small Business Administration procurement center representatives.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Small Business... DEPARTMENT OF STATE SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Cooperation with the Small Business Administration 619.402 Small Business Administration procurement center representatives....

  3. 48 CFR 19.403 - Small Business Administration breakout procurement center representatives.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Small Business... System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Cooperation With the Small Business Administration 19.403 Small Business Administration breakout procurement...

  4. 48 CFR 3403.101-3 - Agency regulations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 34 CFR part 73, Standards of Conduct. ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Agency regulations. 3403.101-3 Section 3403.101-3 Federal Acquisition Regulations System DEPARTMENT OF EDUCATION...

  5. 48 CFR 1901.104-1 - Publication and code arrangement.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., in cumulative form in the Code of Federal Regulations (CFR). (b) The IAAR is issued as chapter 19 of title 48, CFR. ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Publication and...

  6. 48 CFR 628.309 - Contract clauses for workers' compensation insurance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Contract clauses for workers' compensation insurance. 628.309 Section 628.309 Federal Acquisition Regulations System DEPARTMENT... workers' compensation insurance....

  7. 49 CFR 173.448 - General transportation requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false General transportation requirements. 173.448 Section 173.448 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS...

  8. Muco-inert nanoparticle probes and drug carriers

    NASA Astrophysics Data System (ADS)

    Wang, Ying-Ying

    2011-12-01

    Mucus coats the exposed surfaces of the eyes and respiratory, gastrointestinal (GI) and cervicovaginal (CV) tracts, and protects mucosal tissues against pathogens and other foreign particulates. Most foreign particles are effectively trapped in mucus through steric and adhesive interactions, and are rapidly eliminated by different mucus clearance mechanisms. Nevertheless, mucus also immobilizes conventional drug and gene carriers, thereby precluding sustained and targeted drug delivery to mucosal sites. Synthetic particles engineered with muco-inert surfaces, and some viruses, can readily penetrate mucus gel, and may serve as useful probes to understand the biophysical barrier properties of mucus. Improved understanding of the mucus barrier could provide insights into methods to enhance drug and gene delivery at mucosal surfaces, as well as understanding the occasional failure of mucus to protect against infection or injury. Recently, muco-inert nanoparticles were developed by conjugating a dense layer of low MW polyethylene glycol to particle surfaces. Since they are slowed only by steric obstruction from the mucus mesh, various sized muco-inert nanoparticles can be used to probe the microstructure and microrheology of mucus. I applied this technique to determine whether the mucus barrier may be altered by exogenous factors, including the presence of detergent, pH changes and synthetic nanoparticles. I first studied the microrheology of native human cervicovaginal mucus (CVM), and found that CVM behaves as a viscoelastic solid at length scales ≥ 1 microm (preventing large particles from diffusing through) but as a viscoelastic liquid at length scales up to at least 500 nm (allowing smaller particles to diffuse through low viscosity fluid-filled pores). Treating CVM with a nonionic detergent, N9, shifted the viscoelastic liquid-solid transition point to < 200 nm, suggesting hydrophobic interactions between mucin fibers play an important role in regulating the

  9. Muco-inert nanoparticle probes and drug carriers

    NASA Astrophysics Data System (ADS)

    Wang, Ying-Ying

    2011-12-01

    Mucus coats the exposed surfaces of the eyes and respiratory, gastrointestinal (GI) and cervicovaginal (CV) tracts, and protects mucosal tissues against pathogens and other foreign particulates. Most foreign particles are effectively trapped in mucus through steric and adhesive interactions, and are rapidly eliminated by different mucus clearance mechanisms. Nevertheless, mucus also immobilizes conventional drug and gene carriers, thereby precluding sustained and targeted drug delivery to mucosal sites. Synthetic particles engineered with muco-inert surfaces, and some viruses, can readily penetrate mucus gel, and may serve as useful probes to understand the biophysical barrier properties of mucus. Improved understanding of the mucus barrier could provide insights into methods to enhance drug and gene delivery at mucosal surfaces, as well as understanding the occasional failure of mucus to protect against infection or injury. Recently, muco-inert nanoparticles were developed by conjugating a dense layer of low MW polyethylene glycol to particle surfaces. Since they are slowed only by steric obstruction from the mucus mesh, various sized muco-inert nanoparticles can be used to probe the microstructure and microrheology of mucus. I applied this technique to determine whether the mucus barrier may be altered by exogenous factors, including the presence of detergent, pH changes and synthetic nanoparticles. I first studied the microrheology of native human cervicovaginal mucus (CVM), and found that CVM behaves as a viscoelastic solid at length scales ≥ 1 microm (preventing large particles from diffusing through) but as a viscoelastic liquid at length scales up to at least 500 nm (allowing smaller particles to diffuse through low viscosity fluid-filled pores). Treating CVM with a nonionic detergent, N9, shifted the viscoelastic liquid-solid transition point to < 200 nm, suggesting hydrophobic interactions between mucin fibers play an important role in regulating the

  10. 75 FR 282 - Restricting the Mailing of Replica or Inert Explosive Devices

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-05

    ... 111 Restricting the Mailing of Replica or Inert Explosive Devices AGENCY: Postal Service TM . ACTION... the mailing of replica or inert explosive devices, such as grenades, be sent by Registered Mail TM... Service published a Federal Register proposed rule (73 FR 12321) on March 7, 2008 to prohibit replica...

  11. 75 FR 7560 - Public Availability of Identities of Inert Ingredients in Pesticides; Extension of Comment Period

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-22

    ... document extends the public comment period established in the Federal Register of December 23, 2009 (74 FR... AGENCY 40 CFR Part 156 Public Availability of Identities of Inert Ingredients in Pesticides; Extension of... identities of the inert ingredients in pesticide products. Two requests for a 90-day extension of the...

  12. 3-D simulation of gases transport under condition of inert gas injection into goaf

    NASA Astrophysics Data System (ADS)

    Liu, Mao-Xi; Shi, Guo-Qing; Guo, Zhixiong; Wang, Yan-Ming; Ma, Li-Yang

    2016-02-01

    To prevent coal spontaneous combustion in mines, it is paramount to understand O2 gas distribution under condition of inert gas injection into goaf. In this study, the goaf was modeled as a 3-D porous medium based on stress distribution. The variation of O2 distribution influenced by CO2 or N2 injection was simulated based on the multi-component gases transport and the Navier-Stokes equations using Fluent. The numerical results without inert gas injection were compared with field measurements to validate the simulation model. Simulations with inert gas injection show that CO2 gas mainly accumulates at the goaf floor level; however, a notable portion of N2 gas moves upward. The evolution of the spontaneous combustion risky zone with continuous inert gas injection can be classified into three phases: slow inerting phase, rapid accelerating inerting phase, and stable inerting phase. The asphyxia zone with CO2 injection is about 1.25-2.4 times larger than that with N2 injection. The efficacy of preventing and putting out mine fires is strongly related with the inert gas injecting position. Ideal injections are located in the oxidation zone or the transitional zone between oxidation zone and heat dissipation zone.

  13. Young Infants' Reasoning about Physical Events Involving Inert and Self-Propelled Objects

    ERIC Educational Resources Information Center

    Luo, Yuyan; Kaufman, Lisa; Baillargeon, Renee

    2009-01-01

    The present research examined whether 5- to 6.5-month-old infants would hold different expectations about various physical events involving a box after receiving evidence that it was either inert or self-propelled. Infants were surprised if the inert but not the self-propelled box: reversed direction spontaneously (Experiment 1); remained…

  14. Inert-gas welding and brazing enclosure fabricated from sheet plastic

    NASA Technical Reports Server (NTRS)

    Wisner, J. P.

    1965-01-01

    Custom-fabricated plastic bag maintains an inert-gas atmosphere for welding and brazing certain metals. The bag fits over part of the workpieces and the welding and brazing tools. It is also used for metal brazing and fusion plating which require an inert-gas atmosphere.

  15. 19 CFR 11.13 - False designations of origin and false descriptions; false marking of articles of gold or silver.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... descriptions; false marking of articles of gold or silver. 11.13 Section 11.13 Customs Duties U.S. CUSTOMS AND... gold or silver. (a) Articles which bear, or the containers which bear, false designations of origin, or.... 1405q, and shall be detained. (b) Articles made in whole or in part of gold or silver or alloys...

  16. 19 CFR 11.13 - False designations of origin and false descriptions; false marking of articles of gold or silver.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... descriptions; false marking of articles of gold or silver. 11.13 Section 11.13 Customs Duties U.S. CUSTOMS AND... gold or silver. (a) Articles which bear, or the containers which bear, false designations of origin, or.... 1405q, and shall be detained. (b) Articles made in whole or in part of gold or silver or alloys...

  17. 19 CFR 11.13 - False designations of origin and false descriptions; false marking of articles of gold or silver.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... descriptions; false marking of articles of gold or silver. 11.13 Section 11.13 Customs Duties U.S. CUSTOMS AND... gold or silver. (a) Articles which bear, or the containers which bear, false designations of origin, or.... 1405q, and shall be detained. (b) Articles made in whole or in part of gold or silver or alloys...

  18. 19 CFR 11.13 - False designations of origin and false descriptions; false marking of articles of gold or silver.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... descriptions; false marking of articles of gold or silver. 11.13 Section 11.13 Customs Duties U.S. CUSTOMS AND... gold or silver. (a) Articles which bear, or the containers which bear, false designations of origin, or.... 1405q, and shall be detained. (b) Articles made in whole or in part of gold or silver or alloys...

  19. 19 CFR 11.13 - False designations of origin and false descriptions; false marking of articles of gold or silver.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... descriptions; false marking of articles of gold or silver. 11.13 Section 11.13 Customs Duties U.S. CUSTOMS AND... gold or silver. (a) Articles which bear, or the containers which bear, false designations of origin, or.... 1405q, and shall be detained. (b) Articles made in whole or in part of gold or silver or alloys...

  20. Fiscal year 1989 annual report for the Sensors Development Program: Inert Electrodes Program

    SciTech Connect

    Windisch, C.F. Jr.; Koski, O.H.; Stice, N.D.; Morgan, L.G. ); Nikias, C.L. )

    1990-04-01

    The Sensors Development Program is conducted at the Pacific Northwest Laboratory (PNL) for the US Department of Energy (DOE), Office of Industrial Programs (OIP). The work is being performed in conjunction with the Inert Electrodes Program at PNL. The objectives of the Sensors Development Program are to (1) investigate and develop methods of process monitoring/control for operating electrolytic cells and (2) determine safe operating conditions for the inert anodes. The majority of work in FY 1989 involved (1) evaluating Digital Signal Analysis (DSA) methods to monitor inert anode operation and to determine alumina concentration in both PNL bench-scale laboratory cells and the Prototype Inert Anode Test and (2) developing the reference anode against which inert anode voltage signals could be measured by the DSA-based or other methods. 3 refs., 14 figs., 2 tabs.

  1. The economics of inert anodes and wettable cathodes for aluminum reduction cells

    NASA Astrophysics Data System (ADS)

    Keniry, Jeff

    2001-05-01

    Estimating the impact of inert-anode and wettable-cathode technologies on smelter costs must be speculative because no such technologies have yet been commercialized. Even so, some broad conclusions can be drawn about the economic merit of inert anodes in retrofit and greenfield smelter scenarios. Study suggests that retrofitting inert anodes to existing prebake cells generates insufficient economic benefit to justify this objective. Drained cathode cells offer potential for energy savings coupled with increased production, provided that the cell life is greater than three years. Unlocking the potential value of both inert anode and wettable cathode materials will require their use in vertical electrode configurations, where the impact on operating costs and, particularly, capital costs, is expected to be significant. To be economically and technically viable, vertical electrode cells will require wear rates of less than approximately 5 mm per year on the inert electrode surfaces, much less than has so far been reported.

  2. Constructing rich false memories of committing crime.

    PubMed

    Shaw, Julia; Porter, Stephen

    2015-03-01

    Memory researchers long have speculated that certain tactics may lead people to recall crimes that never occurred, and thus could potentially lead to false confessions. This is the first study to provide evidence suggesting that full episodic false memories of committing crime can be generated in a controlled experimental setting. With suggestive memory-retrieval techniques, participants were induced to generate criminal and noncriminal emotional false memories, and we compared these false memories with true memories of emotional events. After three interviews, 70% of participants were classified as having false memories of committing a crime (theft, assault, or assault with a weapon) that led to police contact in early adolescence and volunteered a detailed false account. These reported false memories of crime were similar to false memories of noncriminal events and to true memory accounts, having the same kinds of complex descriptive and multisensory components. It appears that in the context of a highly suggestive interview, people can quite readily generate rich false memories of committing crime. PMID:25589599

  3. 3-3-1 model with inert scalar triplet

    NASA Astrophysics Data System (ADS)

    Dong, P. V.; Nguyen, T. Phong; Soa, D. V.

    2013-11-01

    We show that the typical 3-3-1 models are only self-consistent if they contain interactions that explicitly violate the lepton number. The 3-3-1 model with right-handed neutrinos can by itself work as an economical 3-3-1 model as a natural recognition of the above criteria, while it also produces an inert scalar triplet (η) responsible for dark matter. This is ensured by a Z2 symmetry (assigned so that only η is odd while all other multiplets which perform the economical 3-3-1 model are even), which is not broken by the vacuum. The minimal 3-3-1 model can provide dark matter by a similar realization. Taking the former into account, we show that the dark matter candidate (Hη) contained in η transforms as a singlet in the effective limit under the standard model symmetry and is naturally heavy. The Hη relic density and direct detection cross section will have the correct values when the mass of Hη is in TeV range, as expected. The model predicts the Hη mass mHη=λ5×2TeV and the Hη-nucleon scattering cross section σHη-N=1.56×10-44cm2, provided that the new neutral Higgs boson is much heavier than the dark matter.

  4. Determining inert content in coal dust/rock dust mixture

    DOEpatents

    Sapko, Michael J.; Ward, Jr., Jack A.

    1989-01-01

    A method and apparatus for determining the inert content of a coal dust and rock dust mixture uses a transparent window pressed against the mixture. An infrared light beam is directed through the window such that a portion of the infrared light beam is reflected from the mixture. The concentration of the reflected light is detected and a signal indicative of the reflected light is generated. A normalized value for the generated signal is determined according to the relationship .phi.=(log i.sub.c `log i.sub.co) / (log i.sub.c100 -log i.sub.co) where i.sub.co =measured signal at 0% rock dust i.sub.c100 =measured signal at 100% rock dust i.sub.c =measured signal of the mixture. This normalized value is then correlated to a predetermined relationship of .phi. to rock dust percentage to determine the rock dust content of the mixture. The rock dust content is displayed where the percentage is between 30 and 100%, and an indication of out-of-range is displayed where the rock dust percent is less than 30%. Preferably, the rock dust percentage (RD%) is calculated from the predetermined relationship RD%=100+30 log .phi.. where the dust mixture initially includes moisture, the dust mixture is dried before measuring by use of 8 to 12 mesh molecular-sieves which are shaken with the dust mixture and subsequently screened from the dust mixture.

  5. Visual/vestibular effects of inert gas narcosis.

    PubMed

    Hamilton, K; Laliberte, M F; Heslegrave, R; Khan, S

    1993-08-01

    Divers breathing compressed air at depths beyond 30 m experience a type of behavioural impairment known as inert gas narcosis. This condition degrades performance on a wide range of tasks and has the potential to compromise safety. Symptoms associated with narcosis include slowed response time, amnesia, and euphoria. Studies have also found disturbances to mechanisms regulating ocular control in response to vestibular stimulation; however, these experiments have been limited to very low frequency head movement (0.2 Hz). Thus, to further examine the effects of narcosis on visual/vestibular mechanisms, the vestibular ocular reflex (VOR) was assessed across a range of higher frequencies more representative of natural head movement (2.0-4.7 Hz). Seven subjects were tested prior to, during and after exposure to narcosis which was induced using 30% nitrous oxide. Standard room air was breathed as a control. The results indicated that narcosis decreased the velocity of compensatory eye movements in response to head rotation (decrease in VOR-gain), with more pronounced decreases occurring at the higher frequencies. The lag between eye and head position (phase lag) was also decreased by nitrous oxide; an effect that was again more pronounced at higher frequencies. These results indicate that narcosis disrupts ocular regulatory mechanisms which help to stabilize images on the retina during head movement. PMID:8365388

  6. Metal ion implantation in inert polymers for strain gauge applications

    NASA Astrophysics Data System (ADS)

    Di Girolamo, Giovanni; Massaro, Marcello; Piscopiello, Emanuela; Tapfer, Leander

    2010-10-01

    Metal ion implantation in inert polymers may produce ultra-thin conducting films below the polymer surface. These subsurface films are promising structures for strain gauge applications. To this purpose, polycarbonate substrates were irradiated at room temperature with low-energy metal ions (Cu + and Ni +) and with fluences in the range between 1 × 10 16 and 1 × 10 17 ions/cm 2, in order to promote the precipitation of dispersed metal nanoparticles or the formation of a continuous thin film. The nanoparticle morphology and the microstructural properties of polymer nanocomposites were investigated by glancing-incidence X-ray diffraction and transmission electron microscopy (TEM) measurements. At lower fluences (<5 × 10 16 ions/cm 2) a spontaneous precipitation of spherical-shaped metal nanoparticles occurred below the polymer top-surface (˜50 nm), whereas at higher fluences the aggregation of metal nanoparticles produced the formation of a continuous polycrystalline nanofilm. Furthermore, a characteristic surface plasmon resonance peak was observed for nanocomposites produced at lower ion fluences, due to the presence of Cu nanoparticles. A reduced electrical resistance of the near-surface metal-polymer nanocomposite was measured. The variation of electrical conductivity as a function of the applied surface load was measured: we found a linear relationship and a very small hysteresis.

  7. The diverse biological properties of the chemically inert noble gases.

    PubMed

    Winkler, David A; Thornton, Aaron; Farjot, Géraldine; Katz, Ira

    2016-04-01

    The noble gases represent an intriguing scientific paradox. They are extremely inert chemically but display a remarkable spectrum of clinically useful biological properties. Despite a relative paucity of knowledge of their mechanisms of action, some of the noble gases have been used successfully in the clinic. Studies with xenon have suggested that the noble gases as a class may exhibit valuable biological properties such as anaesthesia; amelioration of ischemic damage; tissue protection prior to transplantation; analgesic properties; and a potentially wide range of other clinically useful effects. Xenon has been shown to be safe in humans, and has useful pharmacokinetic properties such as rapid onset, fast wash out etc. The main limitations in wider use are that: many of the fundamental biochemical studies are still lacking; the lighter noble gases are likely to manifest their properties only under hyperbaric conditions, impractical in surgery; and administration of xenon using convectional gaseous anaesthesia equipment is inefficient, making its use very expensive. There is nonetheless a significant body of published literature on the biochemical, pharmacological, and clinical properties of noble gases but no comprehensive reviews exist that summarize their properties and the existing knowledge of their models of action at the molecular (atomic) level. This review provides such an up-to-date summary of the extensive, useful biological properties of noble gases as drugs and prospects for wider application of these atoms. PMID:26896563

  8. Investigation of materials for inert electrodes in aluminum electrodeposition cells

    SciTech Connect

    Haggerty, J. S.; Sadoway, D. R.

    1987-09-14

    Work was divided into major efforts. The first was the growth and characterization of specimens; the second was Hall cell performance testing. Cathode and anode materials were the subject of investigation. Preparation of specimens included growth of single crystals and synthesis of ultra high purity powders. Special attention was paid to ferrites as they were considered to be the most promising anode materials. Ferrite anode corrosion rates were studied and the electrical conductivities of a set of copper-manganese ferrites were measured. Float Zone, Pendant Drop Cryolite Experiments were undertaken because unsatisfactory choices of candidate materials were being made on the basis of a flawed set of selection criteria applied to an incomplete and sometimes inaccurate data base. This experiment was then constructed to determine whether the apparatus used for float zone crystal growth could be adapted to make a variety of important based melts and their interactions with candidate inert anode materials. The third major topic was Non Consumable Anode (Data Base, Candidate Compositions), driven by our perception that the basis for prior selection of candidate materials was inadequate. Results are presented. 162 refs., 39 figs., 18 tabs.

  9. The Shock Response and Microstructural Determination of an Inert Simulant

    NASA Astrophysics Data System (ADS)

    MacDonald, S. A.; Millett, J. C. F.

    2005-07-01

    The resolution of details of the microstructure in a polymer matrix composite has important applications in addressing safety issues in energetic materials. The generation of three-dimensional microstructure, using a non-invasive method of high resolution will advance knowledge in a range of fields. A series of inert composites have been studied with microstructure analogous to that of plastic bonded explosives (PBXs). The experimental aims of this study lay in several areas. Firstly, adequately defining the bulk morphology. Secondly in determining the geometry of defects that might lead to sites for accidental ignition within the material. Finally in demonstrating a direct linkage into the finite element prediction of mechanical response. The study included investigation of materials selected to firstly test the resolution limits of the X-ray microtomography equipment, but also since a parallel series of shock experiments (with associated modelling) was conducted. This work is the first step in providing a coordinated capability to understand accidental ignition within insensitive high explosives (IHEs).

  10. Inert dark matter in type-II seesaw

    NASA Astrophysics Data System (ADS)

    Chen, Chuan-Hung; Nomura, Takaaki

    2014-09-01

    Weakly interacting massive particle (WIMP) as a dark matter (DM) candidate is further inspired by recent AMS-02 data, which confirm the excess of positron fraction observed earlier by PAMELA and Fermi-LAT experiments. Additionally, the excess of positron+electron flux is still significant in the measurement of Fermi-LAT. For solving the problems of massive neutrinos and observed excess of cosmic-ray, we study the model with an inert Higgs doublet (IHD) in the framework of type-II seesaw model by imposing a Z 2 symmetry on the IHD, where the lightest particle of IHD is the DM candidate and the neutrino masses originate from the Yukawa couplings of Higgs triplet and leptons. We calculate the cosmic-ray production in our model by using three kinds of neutrino mass spectra, which are classified by normal ordering, inverted ordering and quasi-degeneracy. We find that when the constraints of DM relic density and comic-ray antiproton spectrum are taken into account, the observed excess of positron/electron flux could be explained well in normal ordered neutrino mass spectrum. Moreover, excess of comic-ray neutrinos is implied in our model. We find that our results on < σv> are satisfied with and close to the upper limit of IceCube analysis. More data from comic-ray neutrinos could test our model.

  11. Porous HMX initiation studies -- Sugar as an inert simulant

    SciTech Connect

    Sheffield, S.A.; Gustavsen, R.L.; Alcon, R.R.

    1997-11-01

    For several years the authors have been using magnetic particle velocity gauges to study the shock loading of porous HMX (65 and 73% TMD) of different particle sizes to determine their compaction and initiation characteristics. Because it has been difficult to separate the effects of compaction and reaction, an inert simulant was needed with properties similar to HMX. Sugar was selected as the simulant for several reasons: (1) the particle size distribution of C and H granulated sugar is similar to the coarse HMX the authors have been using (120 {micro}m average size), (2) the particle size of C and H confectioners (powdered) sugar is similar to the fine HMX in the studies (10 {micro}m average size), (3) it is an organic material, and (4) sugar was readily available. Because the densities of HMX and sugar are somewhat different, the authors chose to do the experiments on sugar compacts at 65 and 73% TMD. As expected, no reaction was observed in the sugar experiments. Compaction wave profiles were similar to those measured earlier for the HMX, i.e., the compaction waves in the coarse sugar were quite disperse while those in the fine sugar were much sharper. This indicates that the compaction wave profiles are controlled by particle size and not reaction. Also, the coarse sugar gauge signals exhibited a great deal of noise, thought to the be result of fracto-emission.

  12. Creating false memories for visual scenes.

    PubMed

    Miller, M B; Gazzaniga, M S

    1998-06-01

    Creating false memories has become an important tool to investigate the processes underlying true memories. In the course of investigating the constructive and/or reconstructive processes underlying the formation of false memories, it has become clear that paradigms are needed that can create false memories reliably in a variety of laboratory settings. In particular, neuroimaging techniques present certain constraints in terms of subject response and timing of stimuli that a false memory paradigm needs to comply with. We have developed a picture paradigm which results in the false recognition of items of a scene which did not occur almost as often as the true recognition of items that did occur. It uses a single presentation of pictures with thematic, stereotypical scenes (e.g. a beach scene). Some of the exemplars from the scene were removed (e.g. a beach ball) and used as lures during an auditory recognition test. Subjects' performance on this paradigm was compared with their performance on the word paradigm reintroduced by Roediger and McDermott. The word paradigm has been useful in creating false memories in several neuroimaging studies because of the high frequency of false recognition for critical lures (words not presented but closely associated with lists of words that were presented) and the strong subjective sense of remembering accompanying these false recognitions. However, it has several limitations including small numbers of lures and a particular source confusion. The picture paradigm avoids these limitations and produces identical effects on normal subjects. PMID:9705061

  13. Can False Memories Prime Problem Solutions?

    ERIC Educational Resources Information Center

    Howe, Mark L.; Garner, Sarah R.; Dewhurst, Stephen A.; Ball, Linden J.

    2010-01-01

    Previous research has suggested that false memories can prime performance on related implicit and explicit memory tasks. The present research examined whether false memories can also be used to prime higher order cognitive processes, namely, insight-based problem solving. Participants were asked to solve a number of compound remote associate task…

  14. Explaining the Development of False Memories.

    ERIC Educational Resources Information Center

    Reyna, Valerie F.; Holliday, Robyn; Marche, Tammy

    2002-01-01

    Reviews explanatory dimensions of children's false memory relevant to forensic practice: measurement, development, social factors, individual differences, varieties of memories and memory judgments, and varieties of procedures inducing false memories. Asserts that recent studies fail to use techniques that separate acquiescence from memory…

  15. How Does Distinctive Processing Reduce False Recall?

    ERIC Educational Resources Information Center

    Hunt, R. Reed; Smith, Rebekah E.; Dunlap, Kathryn R.

    2011-01-01

    False memories arising from associatively related lists are a robust phenomenon that resists many efforts to prevent it. However, a few variables have been shown to reduce this form of false memory. Explanations for how the reduction is accomplished have focused on either output monitoring processes or constraints on access, but neither idea alone…

  16. 15 CFR 80.6 - False statements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false False statements. 80.6 Section 80.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade BUREAU OF THE CENSUS, DEPARTMENT OF COMMERCE FURNISHING PERSONAL CENSUS DATA FROM CENSUS OF POPULATION SCHEDULES § 80.6...

  17. 15 CFR 80.6 - False statements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false False statements. 80.6 Section 80.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade BUREAU OF THE CENSUS, DEPARTMENT OF COMMERCE FURNISHING PERSONAL CENSUS DATA FROM CENSUS OF POPULATION SCHEDULES § 80.6...

  18. 15 CFR 80.6 - False statements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false False statements. 80.6 Section 80.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade BUREAU OF THE CENSUS, DEPARTMENT OF COMMERCE FURNISHING PERSONAL CENSUS DATA FROM CENSUS OF POPULATION SCHEDULES § 80.6...

  19. 15 CFR 80.6 - False statements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false False statements. 80.6 Section 80.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade BUREAU OF THE CENSUS, DEPARTMENT OF COMMERCE FURNISHING PERSONAL CENSUS DATA FROM CENSUS OF POPULATION SCHEDULES § 80.6...

  20. 15 CFR 80.6 - False statements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false False statements. 80.6 Section 80.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade BUREAU OF THE CENSUS, DEPARTMENT OF COMMERCE FURNISHING PERSONAL CENSUS DATA FROM CENSUS OF POPULATION SCHEDULES § 80.6...

  1. 23 CFR 635.119 - False statements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false False statements. 635.119 Section 635.119 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS... any statement, certificate, or report submitted pursuant to the provisions of the Federal-aid Road...

  2. 23 CFR 635.119 - False statements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false False statements. 635.119 Section 635.119 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS... any statement, certificate, or report submitted pursuant to the provisions of the Federal-aid Road...

  3. 20 CFR 356.3 - False claims.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true False claims. 356.3 Section 356.3 Employees' Benefits RAILROAD RETIREMENT BOARD ADMINISTRATIVE REMEDIES FOR FRAUDULENT CLAIMS OR STATEMENTS CIVIL MONETARY PENALTY INFLATION ADJUSTMENT § 356.3 False claims. In the case of penalties assessed under 31...

  4. 20 CFR 356.3 - False claims.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true False claims. 356.3 Section 356.3 Employees' Benefits RAILROAD RETIREMENT BOARD ADMINISTRATIVE REMEDIES FOR FRAUDULENT CLAIMS OR STATEMENTS CIVIL MONETARY PENALTY INFLATION ADJUSTMENT § 356.3 False claims. In the case of penalties assessed under 31...

  5. Rapid induction of false memory for pictures.

    PubMed

    Weinstein, Yana; Shanks, David R

    2010-07-01

    Recognition of pictures is typically extremely accurate, and it is thus unclear whether the reconstructive nature of memory can yield substantial false recognition of highly individuated stimuli. A procedure for the rapid induction of false memories for distinctive colour photographs is proposed. Participants studied a set of object pictures followed by a list of words naming those objects, but embedded in the list were names of unseen objects. When subsequently shown full colour pictures of these unseen objects, participants consistently claimed that they had seen them, while discriminating with high accuracy between studied pictures and new pictures whose names did not appear in the misleading word list. These false memories can be reported with high confidence as well as the feeling of recollection. This new procedure allows the investigation of factors that influence false memory reports with ecologically valid stimuli and of the similarities and differences between true and false memories. PMID:20623419

  6. Priming analogical reasoning with false memories.

    PubMed

    Howe, Mark L; Garner, Sarah R; Threadgold, Emma; Ball, Linden J

    2015-08-01

    Like true memories, false memories are capable of priming answers to insight-based problems. Recent research has attempted to extend this paradigm to more advanced problem-solving tasks, including those involving verbal analogical reasoning. However, these experiments are constrained inasmuch as problem solutions could be generated via spreading activation mechanisms (much like false memories themselves) rather than using complex reasoning processes. In three experiments we examined false memory priming of complex analogical reasoning tasks in the absence of simple semantic associations. In Experiment 1, we demonstrated the robustness of false memory priming in analogical reasoning when backward associative strength among the problem terms was eliminated. In Experiments 2a and 2b, we extended these findings by demonstrating priming on newly created homonym analogies that can only be solved by inhibiting semantic associations within the analogy. Overall, the findings of the present experiments provide evidence that the efficacy of false memory priming extends to complex analogical reasoning problems. PMID:25784574

  7. Viscoelastic properties of the false vocal fold

    NASA Astrophysics Data System (ADS)

    Chan, Roger W.

    2001-05-01

    The biomechanical properties of vocal fold tissues have been the focus of many previous studies, as vocal fold viscoelasticity critically dictates the acoustics and biomechanics of phonation. However, not much is known about the viscoelastic response of the ventricular fold or false vocal fold. It has been shown both clinically and in computer simulations that the false vocal fold may contribute significantly to the aerodynamics and sound generation processes of human voice production, with or without flow-induced oscillation of the false fold. To better understand the potential role of the false fold in phonation, this paper reports some preliminary measurements on the linear and nonlinear viscoelastic behavior of false vocal fold tissues. Linear viscoelastic shear properties of human false fold tissue samples were measured by a high-frequency controlled-strain rheometer as a function of frequency, and passive uniaxial tensile stress-strain response of the tissue samples was measured by a muscle lever system as a function of strain and loading rate. Elastic moduli (Young's modulus and shear modulus) of the false fold tissues were calculated from the measured data. [Work supported by NIH.

  8. Water in the presence of inert Lennard-Jones obstacles

    NASA Astrophysics Data System (ADS)

    Kurtjak, Mario; Urbic, Tomaz

    2014-04-01

    Water confined by the presence of a 'sea' of inert obstacles was examined. In the article, freely mobile two-dimensional Mercedes-Benz (MB) water put to a disordered, but fixed, matrix of Lennard-Jones disks was studied by the Monte Carlo computer simulations. For the MB water molecules in the matrix of Lennard-Jones disks, we explored the structures, hydrogen-bond-network formation and thermodynamics as a function of temperature and size and density of matrix particles. We found that the structure of model water is perturbed by the presence of the obstacles. Density of confined water, which was in equilibrium with the bulk water, was smaller than the density of the bulk water and the temperature dependence of the density of absorbed water did not show the density anomaly in the studied temperature range. The behaviour observed as a consequence of confinement is similar to that of increasing temperature, which can for a matrix lead to a process similar to capillary evaporation. At the same occupancy of space, smaller matrix molecules cause higher destruction effect on the absorbed water molecules than the bigger ones. We have also tested the hypothesis that at low matrix densities the obstacles induce an increased ordering and 'hydrogen bonding' of the MB model molecules, relative to pure fluid, while at high densities the obstacles reduce MB water structuring, as they prevent the fluid to form good 'hydrogen-bonding' networks. However, for the size of matrix molecules similar to that of water, we did not observe this effect.

  9. Sodium conversion experiments in the Inert Carrier Process demonstration plant

    SciTech Connect

    Keneshea, F.J.; Hobart, S.A.; Kelly, M.T.; Pohl, C.S.; Riley, D.

    1983-01-01

    The purpose of the sodium treatment studies reported here was to evaluate the use of the Inert Carrier Process (ICP) for converting sodium metal to a stable disposal form. The ICP demonstration plant consists of a closed loop of silicone oil that is circulated through a reservoir called a disperser. Solid sodium particles were fed to the disperser and kept suspended in the silicone oil carrier by turbulence. The sodium did not react with the silicone oil carrier. The dispersion of sodium in silicone oil was fed to an in-line mixer (''jet'' mixer) where it was mixed with a reactant. Water was used as the reactant in most of the tests, generating sodium hydroxide and hydrogen as the initial products. Analysis of the final solid product from the reaction indicated that the sodium hydroxide initial product interacted with the silicone oil. Complete reaction of the sodium in the demonstration plant required at least a 6/1 molar ratio of water to sodium. Good separation of the product solution was difficult because of the small difference in density between the aqueous product phase and the organic carrier phase. Emulsification of the silicone oil-aqueous solution was minimized by applying heat to the separator. Foaming of the silicone oil in the separator occurred, aggravated by the evolution of hydrogen from the sodium conversion reaction. Bench-scale tests were conducted to analyze and resolve several problems encountered in the plant experiments, such as incomplete reaction in the jet mixer, poor separation of the product from the silicone oil, formation of an oil aqueous solution emulsion in the separator, and oil foaming in the separator. Solidification tests were carried out to immobilize the sodium conversion product by mixing it with various binders. The most satisfactory binder was EPON 828, an epoxy resin.

  10. The false-negative Meckel's scan

    SciTech Connect

    Wilton, G.; Froelich, J.W.

    1982-10-01

    A case is presented of a 17-month-old girl who underwent two Meckel's scans with /sup 99m/Tc pertechnetate. The initial study was interpreted as normal while a subsequent study five days later was definitely positive. Surgery immediately following the positive Meckel's scan demonstrated a Meckel's diverticulum containing gastric mucosa without evidence of active hemorrhage. This prompted a review of the literature in reference to false-negative Meckel's scans which revealed a wide variance in the reported incidence of false-negative examinations. Repeat scintigraphy in the face of a strong clinical suspicion after an initial normal study may decrease the indicence of false-negative imaging series.

  11. A Closer Look at Self-Reported Suicide Attempts: False Positives and False Negatives

    ERIC Educational Resources Information Center

    Ploderl, Martin; Kralovec, Karl; Yazdi, Kurosch; Fartacek, Reinhold

    2011-01-01

    The validity of self-reported suicide attempt information is undermined by false positives (e.g., incidences without intent to die), or by unreported suicide attempts, referred to as false negatives. In a sample of 1,385 Austrian adults, we explored the occurrence of false positives and false negatives with detailed, probing questions. Removing…

  12. Composition suitable for use as inert electrode having good electrical conductivity and mechanical properties

    DOEpatents

    Ray, S.P.; Rapp, R.A.

    1984-06-12

    An improved inert electrode composition is suitable for use as an inert electrode in the production of metals such as aluminum by the electrolytic reduction of metal oxide or metal salt dissolved in a molten salt bath. The composition comprises one or more metals or metal alloys and metal compounds which may include oxides of the metals comprising the alloy. The alloy and metal compounds are interwoven in a network which provides improved electrical conductivity and mechanical strength while preserving the level of chemical inertness necessary for such an electrode to function satisfactorily. 8 figs.

  13. Inert anode containing base metal and noble metal useful for the electrolytic production of aluminum

    DOEpatents

    Ray, Siba P.; Liu, Xinghua

    2000-01-01

    An inert anode for production of metals such as aluminum is disclosed. The inert anode comprises a base metal selected from Cu and Ag, and at least one noble metal selected from Ag, Pd, Pt, Au, Rh, Ru, Ir and Os. The inert anode may optionally be formed of sintered particles having interior portions containing more base metal than noble metal and exterior portions containing more noble metal than base metal. In a preferred embodiment, the base metal comprises Cu, and the noble metal comprises Ag, Pd or a combination thereof.

  14. Stability and performance analysis of a full-train system with inerters

    NASA Astrophysics Data System (ADS)

    Wang, Fu-Cheng; Hsieh, Min-Ruei; Chen, Hsueh-Ju

    2012-04-01

    This paper discusses the use of inerters to improve the stability and performance of a full-train system. First, we construct a 28 degree-of-freedom train model in AutoSim, and obtain a linearised model for analysis in Matlab. Then, the benefits of inerters are investigated by the critical speed, settling time and passenger comfort. In addition, we apply a new mechatronic network for further performance improvement, and synthesise the optimal electrical circuit for experimental verification. From the results, inerters are shown to be effective in improving the stability and performance of train systems.

  15. Composition suitable for use as inert electrode having good electrical conductivity and mechanical properties

    DOEpatents

    Ray, Siba P.; Rapp, Robert A.

    1984-01-01

    An improved inert electrode composition is suitable for use as an inert electrode in the production of metals such as aluminum by the electrolytic reduction of metal oxide or metal salt dissolved in a molten salt bath. The composition comprises one or more metals or metal alloys and metal compounds which may include oxides of the metals comprising the alloy. The alloy and metal compounds are interwoven in a network which provides improved electrical conductivity and mechanical strength while preserving the level of chemical inertness necessary for such an electrode to function satisfactorily.

  16. Animal cognition: bumble bees suffer 'false memories'.

    PubMed

    Reinhard, Judith

    2015-03-16

    The existence of 'false memories', where individuals remember events that they have never actually experienced, is well established in humans. Now a new study reports that insects similarly form illusory memories through merging of memory traces. PMID:25784044

  17. Hypnotizability, not suggestion, influences false memory development.

    PubMed

    Dasse, Michelle N; Elkins, Gary R; Weaver, Charles A

    2015-01-01

    Hypnotizability influences the development of false memories. In Experiment 1, participants heard a positive or negative suggestion regarding hypnosis and then listened to 8 Deese-Roediger-McDermott (DRM) false memory paradigm lists in a hypnotic state. Neither hypnosis nor prehypnotic suggestion affected memory. Highly hypnotizable participants were more accurate in recall and recognition. In Experiment 2, suggestions were delivered in the form of feedback. Participants heard a positive or negative suggestion about their performance prior to either the encoding or retrieval of 8 DRM lists. Neither accurate nor false memories were affected by the suggestion. Highly hypnotizable individuals recognized fewer critical lures if they received a negative suggestion about their performance. These results highlight the unusual role of hypnotizability in the creation of false memories. PMID:25365130

  18. Visual false memories in posttraumatic stress disorder.

    PubMed

    Moradi, Ali Reza; Heydari, Ali Hosain; Abdollahi, Mohammad Hossain; Rahimi-Movaghar, Vafa; Dalgleish, Tim; Jobson, Laura

    2015-11-01

    This study investigated visual false memories in posttraumatic stress disorder (PTSD). The Scenic False Memory paradigm (SFM, Hauschildt, Peters, Jelinek, & Moritz, 2012) was administered to male Iranian military personnel who had participated in the Iran-Iraq war and were diagnosed with (n = 21) or without (n = 21) PTSD and a sample of healthy male non-trauma-exposed controls (n = 21). Trauma-exposed participants recalled and recognized a significantly lower percentage of hits and a significantly greater percentage of false memories for both trauma-related and non-trauma-related video scenes, than non-trauma-exposed controls. Among the trauma-exposed participants, those with and without PTSD did not differ significantly in terms of percentage of hits and false memories recalled on the SFM. Those with PTSD were found to recognize significantly fewer hits for both the trauma-related and non-trauma-related videos than those without PTSD. Those with PTSD also recognized significantly more false memories for the trauma video scene than the non-PTSD group. The findings suggest that those with trauma exposure, and in particular those with PTSD, may have a greater susceptibility to visual false memory. PMID:26390193

  19. Language Promotes False-Belief Understanding

    PubMed Central

    Pyers, Jennie E.; Senghas, Ann

    2010-01-01

    Developmental studies have identified a strong correlation in the timing of language development and false-belief understanding. However, the nature of this relationship remains unresolved. Does language promote false-belief understanding, or does it merely facilitate development that could occur independently, albeit on a delayed timescale? We examined language development and false-belief understanding in deaf learners of an emerging sign language in Nicaragua. The use of mental-state vocabulary and performance on a low-verbal false-belief task were assessed, over 2 years, in adult and adolescent users of Nicaraguan Sign Language. Results show that those adults who acquired a nascent form of the language during childhood produce few mental-state signs and fail to exhibit false-belief understanding. Furthermore, those whose language developed over the period of the study correspondingly developed in false-belief understanding. Thus, language learning, over and above social experience, drives the development of a mature theory of mind. PMID:19515119

  20. How Does Distinctive Processing Reduce False Recall?

    PubMed

    Hunt, R Reed; Smith, Rebekah E; Dunlap, Kathryn R

    2011-11-01

    False memories arising from associatively related lists are a robust phenomenon that resists many efforts to prevent it. However, a few variables have been shown to reduce this form of false memory. Explanations for how the reduction is accomplished have focused on either output monitoring processes or constraints on access, but neither idea alone is sufficient to explain extant data. Our research was driven by a framework that distinguishes item-based and event-based distinctive processing to account for the effects of different variables on both correct recall of study list items and false recall. We report the results of three experiments examining the effect of a deep orienting task and the effect of visual presentation of study items, both of which have been shown to reduce false recall. The experiments replicate those previous findings and add important new information about the effect of the variables on a recall test that eliminates the need for monitoring. The results clearly indicate that both post-access monitoring and constraints on access contribute to reductions in false memories. The results also showed that the manipulations of study modality and orienting task had different effects on correct and false recall, a pattern that was predicted by the item-based/event-based distinctive processing framework. PMID:22003267

  1. Credible suggestions affect false autobiographical beliefs.

    PubMed

    Scoboria, Alan; Wysman, Lauren; Otgaar, Henry

    2012-07-01

    False memory implantation studies are characterised by suggestions indicating that specific unremembered events occurred, attributing suggested events to a knowledgeable source (e.g., parents), and including true events that provide evidence that this source was consulted. These characteristics create a particular retrieval context that influences how individuals come to believe that false events occurred. Two studies used a variant of implantation methods to vary the proportion of events attributed to parents and the presence of true events within the suggestion. In Study 1 participants received six false events, and were told that all or some events came from parents. Participants told that all of the events came from parents formed more and stronger false beliefs. In Study 2 participants also received two true events, and a third group was told that half of the events came from their parents. Participants given the specific ratio ("half") endorsed more false beliefs, and beliefs between the other groups no longer differed. Across both studies participants told that some events came from parents reported stronger memory phenomenology. The effect of suggestions on false beliefs in implantation studies depends partly on the credibility of suggestions derived from providing information about the source of suggested events. PMID:22537029

  2. Remedies by competitors for false advertising.

    PubMed

    Hirsch, B D; Wilcox, D P

    1990-05-01

    Patients who are victimized as a consequence of false medical advertising are not the only ones who can sue for damages. Under section 43(a) of the Lanham Act, effective November 17, 1989, anyone "who believes that he or she is or is likely to be damaged" by deceptive advertising may bring a civil action for damages (1). Competing physicians may sue other physicians who falsely advertise that they possess unique skills and achieve better results than other physicians because they employ exclusive methods of treatment or claim that certain surgical procedures they perform in the office are absolutely safe and without risk or who advertise false professional credentials to lure patients. Voluntary informed consent excludes the use of deceit. Misrepresentation through advertising deprives a patient of the right to exercise an informed consent (2). A patient who relies on a doctor's false advertising in agreeing to a procedure that causes the patient injury may sue for malpractice even if the procedure was performed without negligence. False medical advertising also exposes the advertiser to litigation by competitors for unfair competition. This article is concerned with the remedy that may be available for instituting private litigation against physicians and other health care providers who engage in untruthful advertising. PMID:2343426

  3. Inert anode containing oxides of nickel iron and cobalt useful for the electrolytic production of metals

    DOEpatents

    Ray, Siba P.; Liu, Xinghua; Weirauch, Jr., Douglas A.

    2002-01-01

    An inert anode for the electrolytic production of metals such as aluminum is disclosed. The inert anode includes a ceramic oxide material preferably made from NiO, Fe.sub.2 O.sub.3 and CoO. The inert anode composition may comprise the following mole fractions of NiO, Fe.sub.2 O.sub.3 and CoO: 0.15 to 0.99 NiO; 0.0001 to 0.85 Fe.sub.2 O.sub.3 ; and 0.0001 to 0.45 CoO. The inert anode may optionally include other oxides and/or at least one metal phase, such as Cu, Ag, Pd, Pt, Au, Rh, Ru, Ir and/or Os. The Ni--Fe--Co--O ceramic material exhibits very low solubility in Hall cell baths used to produce aluminum.

  4. For cermet inert anode containing oxide and metal phases useful for the electrolytic production of metals

    DOEpatents

    Ray, Siba P.; Liu, Xinghua; Weirauch, Douglas A.

    2002-01-01

    A cermet inert anode for the electrolytic production of metals such as aluminum is disclosed. The inert anode comprises a ceramic phase including an oxide of Ni, Fe and M, where M is at least one metal selected from Zn, Co, Al, Li, Cu, Ti, V, Cr, Zr, Nb, Ta, W, Mo, Hf and rare earths, preferably Zn and/or Co. Preferred ceramic compositions comprise Fe.sub.2 O.sub.3, NiO and ZnO or CoO. The cermet inert anode also comprises a metal phase such as Cu, Ag, Pd, Pt, Au, Rh, Ru, Ir and/or Os. A preferred metal phase comprises Cu and Ag. The cermet inert anodes may be used in electrolytic reduction cells for the production of commercial purity aluminum as well as other metals.

  5. Inert anode containing oxides of nickel, iron and zinc useful for the electrolytic production of metals

    DOEpatents

    Ray, Siba P.; Weirauch, Jr., Douglas A.; Liu, Xinghua

    2002-01-01

    An inert anode for the electrolytic production of metals such as aluminum is disclosed. The inert anode includes a ceramic oxide material preferably made from NiO, Fe.sub.2 O.sub.3 and ZnO. The inert anode composition may comprise the following mole fractions of NiO, Fe.sub.2 O.sub.3 and ZnO: 0.2 to 0.99 NiO; 0.0001 to 0.8 Fe.sub.2 O.sub.3 ; and 0.0001 to 0.3 ZnO. The inert anode may optionally include other oxides and/or at least one metal phase, such as Cu, Ag, Pd, Pt, Au, Rh, Ru, Ir and/or Os. The Ni--Fe--Co--O ceramic material exhibits very low solubility in Hall cell baths used to produce aluminum.

  6. 75 FR 30300 - Restricting the Mailing of Replica or Inert Explosive Devices

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-01

    ..., 2010 (75 FR 282-283), which added restrictions to the mailing of replica and inert explosive devices in... discovered in the mail. Such evacuations resulted in unnecessary expense and loss of productivity to...

  7. An investigation of false positive dosimetry results

    SciTech Connect

    Lewandowski, M.A.; Davis, S.A.; Goff, T.E.; Wu, C.F.

    1996-12-31

    The Waste Isolation Pilot Plant (WIPP) is a facility designed for the demonstration of the safe disposal of transuranic waste. Currently, the radiation source term is confined to sealed calibration and check sources since WIPP has not received waste for disposal. For several years the WIPP Dosimetry Group has operated a Harshaw Model 8800C reader to analyze Harshaw 8801-7776 thermoluminescent cards (3 TLD-700 and 1 TLD-600) with 8805 holder. The frequency of false positive results for quarterly dosimeter exchanges is higher than desired by the Dosimetry Group management. Initial observations suggested that exposure to intense ambient sunlight may be responsible for the majority of the false positive readings for element 3. A study was designed to investigate the possibility of light leaking through the holder and inducing a signal in element 3. This paper discusses the methods and results obtained, with special emphasis placed on recommendations to reduce the frequency of light-induced false positive readings.

  8. Photographs cause false memories for the news.

    PubMed

    Strange, Deryn; Garry, Maryanne; Bernstein, Daniel M; Lindsay, D Stephen

    2011-01-01

    What is the effect on memory when seemingly innocuous photos accompany false reports of the news? We asked people to read news headlines of world events, some of which were false. Half the headlines appeared with photographs that were tangentially related to the event; others were presented without photographs. People saw each headline only once, and indicated whether they remembered the event, knew about it, or neither. Photos led people to immediately and confidently remember false news events. Drawing on the Source Monitoring Framework (Johnson, Hashtroudi, & Lindsay, 1993), we suggest that people often relied on familiarity and other heuristic processes when making their judgments and thus experienced effects of the photos as evidence of memory for the headlines. PMID:21062659

  9. Consequences of False-Positive Screening Mammograms

    PubMed Central

    Tosteson, Anna N. A.; Fryback, Dennis G.; Hammond, Cristina S.; Hanna, Lucy G.; Grove, Margaret R.; Brown, Mary; Wang, Qianfei; Lindfors, Karen; Pisano, Etta D.

    2014-01-01

    Importance False-positive mammograms, a common occurrence in breast cancer screening programs, represent a potential screening harm that is currently being evaluated by the United States Preventive Services Task Force. Objective To measure the impact of false-positive mammograms on quality of life by measuring personal anxiety, health utility and future screening attitudes. Design Longitudinal Digital Mammographic Imaging Screening Trial (DMIST) quality-of-life sub-study telephone survey shortly after screening and one year later. Setting Twenty-two DMIST sites Participants Randomly-selected DMIST participants with positive and negative mammograms. Exposure(s) for observational studies Mammogram requiring follow-up testing or referral without a cancer diagnosis. Main Outcome(s) and Measure(s) The Spielberger State-Trait Anxiety Index short-form (STAI-6) and the EuroQol EQ-5D with United States scoring. Attitudes toward future screening measured by women’s self-report of future intention to undergo mammography screening and willingness to travel and stay overnight to receive a hypothetical new mammogram that would detect as many cancers with half the false-positives. Results Among 1,450 eligible women invited to participate, 1,226 women (85%) were enrolled with follow-up interviews obtained for 1,028 (84%). Anxiety was significantly higher for women with false-positive mammograms (STAI-6:35.2 vs. 32.7), but health utility did not differ and there were no significant differences between groups at one year. Future screening intentions differed by group (26% vs. 14% more likely in false-positive vs. negative); willingness to travel and stay overnight did not (11% vs. 10% in false-positive vs. negative). Future screening intention was significantly increased among women with false-positive mammograms (OR: 2.12; 95%CI:1.54, 2.93), younger age (OR:2.78; 95%CI:1.5,5.0) and poorer health (OR: 1.63; 95%CI:1.09, 2.43). Women’s anticipated high-level anxiety regarding

  10. Analysis of the influence of inert particles on the propagation of a cellular heterogeneous detonation

    NASA Astrophysics Data System (ADS)

    Fedorov, A. V.; Kratova, Y. V.

    2015-05-01

    The interaction of a cellular detonation wave with a cloud of inert particles is investigated numerically. The regimes of propagation of the heterogeneous cellular detonation and its suppression are identified. The influence of various parameters of the inert cloud is demonstrated. The critical length of the cloud for detonation suppression is determined. It is shown that the disperse composition and the non-uniform distribution of particles of the particle cloud are important parameters affecting the detonation propagation mode.

  11. Investigation on the Oscillating Gas Flow Along AN Inertance Tube by Experimental and Cfd Methods

    NASA Astrophysics Data System (ADS)

    Chen, Houlei; Zhao, Miguang; Yang, Luwei; Cai, Jinghui; Hong, Guotong; Liang, Jingtao

    2010-04-01

    To investigate the oscillating gas flow along an inertance tube used in pulse tube coolers, a CFD model is set up for FLUENT and an experimental measuring cell is designed and optimized by CFD results. Some characteristics of oscillating flow are demonstrated and discussed. Then, the flow status along an inertance tube is measured by the optimized measuring cell. The experimental results validate the simulating results.

  12. INVESTIGATION ON THE OSCILLATING GAS FLOW ALONG AN INERTANCE TUBE BY EXPERIMENTAL AND CFD METHODS

    SciTech Connect

    Chen Houlei; Zhao Miguang; Yang Luwei; Cai Jinghui; Hong Guotong; Liang Jingtao

    2010-04-09

    To investigate the oscillating gas flow along an inertance tube used in pulse tube coolers, a CFD model is set up for FLUENT and an experimental measuring cell is designed and optimized by CFD results. Some characteristics of oscillating flow are demonstrated and discussed. Then, the flow status along an inertance tube is measured by the optimized measuring cell. The experimental results validate the simulating results.

  13. Loop transformations to prevent false sharing

    SciTech Connect

    Granston, E.D.; Montaut, T.; Bodin, F.

    1995-08-01

    To date, page management in shared virtual memory (SVM) systems has been primarily the responsibility of the run-time system. However, there are some problems that are difficult to resolve efficiently at run time. Chief among these is false sharing. In this paper, a loop transformation theory is developed for identifying and eliminating potential sources of multiple-writer false sharing and other sources of page migration resulting from regular references in numerical applications. Loop nests of one and two dimensions (before blocking) with single-level, DOALL-style parallelism are covered. The potential of these transformations is demonstrated experimentally.

  14. False-positive Gram-stained smears.

    PubMed

    Hoke, C H; Batt, J M; Mirrett, S; Cox, R L; Reller, L B

    1979-02-01

    The rate per 1,000 smears showing nonviable Gram-negative bacilli (false-positive smears) increased from a baseline of 10.8 to 38.5 following purchase of new culture-collection devices; the rate decreased to 8.0 following replacement of contaminated culture sets. False-positive reports led to changes in therapy for five patients. In addition to being sterile, commercial culture-collection devices should be certified by the manufacturer as being free of stainable microorganisms or as unsuitable for preparation of Gram-stained smears. PMID:83398

  15. A new method for municipal solid waste incinerator (MSWI) fly ash inertization, based on colloidal silica.

    PubMed

    Bontempi, E; Zacco, A; Borgese, L; Gianoncelli, A; Ardesi, R; Depero, L E

    2010-11-01

    Municipal solid waste incineration (MSWI) is a straightforward way to manage waste, however the disposal of process byproducts, mainly bottom and fly ash, is still a problem, because of their hazardous contents. Fly ash is a byproduct of many other processes that involve combustion to produce energy. In this paper we present and discuss a new method for MSWI fly ash inertization, mainly based on the use of colloidal silica as a stabilization agent for metals. In the patented procedure, fly ash of different provenance can be used to produce an inert and non-hazardous material, that can be reused. In fact to make the recovery process more efficient, landfilling should be totally avoided. For this reason, to enhance the possibility of reuse, a washing process, for salts recovery, is proposed as a final step of the inertization procedure. The obtained inert material is called COSMOS (COlloidal Silica Medium to Obtain Safe inert), and it is composed of calcium carbonate, calcium sulfate, silicon oxide and a wide quantity of non-soluble amorphous compounds. COSMOS does not contain any corrosive salts. This makes it extremely interesting for cement industry applications with several other advantages, and environmental benefits. The new proposed inertization procedure appears very promising, because it allows MSWI fly ash to be considered a valuable resource. Thanks to the obtained results, a demonstration project, in the frame of LIFE+, has been funded by the European Commission (LIFE+ 2008 project ENV/IT/000434, ). PMID:20959931

  16. Peptide derived from Pvfp-1 as bioadhesive on bio-inert surface.

    PubMed

    Jiang, Zhen; Yu, Yabiao; Du, Lina; Ding, Xiyu; Xu, Hui; Sun, Yanan; Zhang, Qiqing

    2012-02-01

    Surface property is one important characteristic of materials, especially for ones that are bio-inert but designed for bio-medical application. In this study, we designed a series of peptides and compared their capacities as bioadhesive to improve the surface bioactivity of bio-inert material. The peptides were designed according to the sequence of Perna viridis foot protein 1 (Pvfp-1), one of the Mfp-1s (mussel foot protein 1) which play key roles in wet adhesion of mussel byssus. And the Teflon (PTFE) was chosen as a model of bio-inert material. With adsorption, adhesion and coating analysis, it was found that peptide C2 (M) (derived from the non-repeating region of Pvfp-1, contains modified DOPA) has superior coating and adhesion abilities especially on the bio-inert surface of PTFE. After coating with peptide C2 (M), the cell adhesion and spreading of osteoblast MC3T3-E1 cells on PTFE were significantly improved compared with those on non-coated surface, and the peptide-coating did not show any cell toxicity. Therefore, peptide C2 (M) is effective for improving the bioactivity of bio-inert PTFE, and could be potentially used as a bioadhesive on other bio-inert materials for biomedical application. Moreover, this study also provided new insights in designing other peptide-based bioadhesive materials. PMID:22079698

  17. A Synchronization Account of False Recognition

    ERIC Educational Resources Information Center

    Johns, Brendan T.; Jones, Michael N.; Mewhort, Douglas J. K.

    2012-01-01

    We describe a computational model to explain a variety of results in both standard and false recognition. A key attribute of the model is that it uses plausible semantic representations for words, built through exposure to a linguistic corpus. A study list is encoded in the model as a gist trace, similar to the proposal of fuzzy trace theory…

  18. What Makes Language Learners False Beginners?

    ERIC Educational Resources Information Center

    Nakamura, Tomoko

    A study in Japan investigated second language skill loss and maintenance in three groups of English-as-a-Second-Language learners: (1) ninth graders studying basic vocabulary and sentence structures (true beginners); (2) students in the lowest level English class at a technical college, but with some English language skills (false beginners); and…

  19. Development of the False-Memory Illusion

    ERIC Educational Resources Information Center

    Brainerd, C. J.; Forrest, T. J.; Karibian, D.; Reyna, V. F.

    2006-01-01

    The counterintuitive developmental trend in the Deese-Roediger-McDermott (DRM) illusion (that false-memory responses increase with age) was investigated in learning-disabled and nondisabled children from the 6- to 14-year-old age range. Fuzzy-trace theory predicts that because there are qualitative differences in how younger versus older children…

  20. Growth of false bottoms under sea ice

    NASA Astrophysics Data System (ADS)

    Smith, Naomi; Feltham, Daniel; Flocco, Daniela

    2015-04-01

    In the summer months, melt water from the surface of Arctic sea ice can percolate through the relatively porous ice and collect at the ice-ocean interface, filling hollows in the base of the ice. These pools are called under-ice melt ponds. Freezing can occur at the interface between the fresh water and the oceanic mixed layer, forming a sheet of ice called a false bottom. These have been observed to thicken and migrate upwards over time. False bottoms insulate the true base of the sea ice from the ocean and their formation is a significant mechanism of Arctic sea ice summer growth. Current parameterisations of basal ablation of sea ice in climate models do not account for these processes, the inclusion of which could improve the accuracy of predictions of Arctic sea ice. In this poster, a one-dimensional thermodynamic model of the evolution of under-ice melt ponds and false bottoms is presented. Our aim is to develop a parameterisation of the impact of under ice melt ponds and false bottoms on basal ablation of Arctic sea ice appropriate for use in gridded climate models.

  1. Inferring False Beliefs from Actions and Reactions.

    ERIC Educational Resources Information Center

    Moses, Louis J.; Flavell, John H.

    1990-01-01

    Two experiments investigated the possibility that three year olds would do better on tasks in which belief cues were stronger than on standard false belief tasks, in which the children could reason backward to the belief from its effects. Findings provided strong support for the view that three year olds do not fully understand the…

  2. Infants' Reasoning about Others' False Perceptions

    ERIC Educational Resources Information Center

    Song, Hyun-joo; Baillargeon, Renee

    2008-01-01

    Prior research suggests that children younger than age 3 or 4 do not understand that an agent may be deceived by an object's misleading appearance. The authors asked whether 14.5-month-olds would give evidence in a violation-of-expectation task that they understand that agents may form false perceptions. Infants first watched events in which an…

  3. Underpowered samples, false negatives, and unconscious learning.

    PubMed

    Vadillo, Miguel A; Konstantinidis, Emmanouil; Shanks, David R

    2016-02-01

    The scientific community has witnessed growing concern about the high rate of false positives and unreliable results within the psychological literature, but the harmful impact of false negatives has been largely ignored. False negatives are particularly concerning in research areas where demonstrating the absence of an effect is crucial, such as studies of unconscious or implicit processing. Research on implicit processes seeks evidence of above-chance performance on some implicit behavioral measure at the same time as chance-level performance (that is, a null result) on an explicit measure of awareness. A systematic review of 73 studies of contextual cuing, a popular implicit learning paradigm, involving 181 statistical analyses of awareness tests, reveals how underpowered studies can lead to failure to reject a false null hypothesis. Among the studies that reported sufficient information, the meta-analytic effect size across awareness tests was d z = 0.31 (95 % CI 0.24-0.37), showing that participants' learning in these experiments was conscious. The unusually large number of positive results in this literature cannot be explained by selective publication. Instead, our analyses demonstrate that these tests are typically insensitive and underpowered to detect medium to small, but true, effects in awareness tests. These findings challenge a widespread and theoretically important claim about the extent of unconscious human cognition. PMID:26122896

  4. False Accusations of Nosocomial Sexual Abuse.

    ERIC Educational Resources Information Center

    Money, John

    1992-01-01

    Practitioners performing routine physical examination may be falsely accused of sexual abuse. Criminal justice system is incompatible with biomedical system of prevention. It is responsible for establishment of sexual abuse industry, practitioners of which have vested interest in maintaining status quo of sexual criminalization. They themselves…

  5. How to Justify Teaching False Science

    ERIC Educational Resources Information Center

    Slater, Matthew H.

    2008-01-01

    We often knowingly teach false science. Such a practice conflicts with a prima facie pedagogical value placed on teaching only what is true. I argue that only a partial dissolution of the conflict is possible: the proper aim of instruction in science is not to provide an armory of facts about what things the world contains, how they interact, and…

  6. False alarm reduction in critical care.

    PubMed

    Clifford, Gari D; Silva, Ikaro; Moody, Benjamin; Li, Qiao; Kella, Danesh; Chahin, Abdullah; Kooistra, Tristan; Perry, Diane; Mark, Roger G

    2016-08-01

    High false alarm rates in the ICU decrease quality of care by slowing staff response times while increasing patient delirium through noise pollution. The 2015 PhysioNet/Computing in Cardiology Challenge provides a set of 1250 multi-parameter ICU data segments associated with critical arrhythmia alarms, and challenges the general research community to address the issue of false alarm suppression using all available signals. Each data segment was 5 minutes long (for real time analysis), ending at the time of the alarm. For retrospective analysis, we provided a further 30 seconds of data after the alarm was triggered. A total of 750 data segments were made available for training and 500 were held back for testing. Each alarm was reviewed by expert annotators, at least two of whom agreed that the alarm was either true or false. Challenge participants were invited to submit a complete, working algorithm to distinguish true from false alarms, and received a score based on their program's performance on the hidden test set. This score was based on the percentage of alarms correct, but with a penalty that weights the suppression of true alarms five times more heavily than acceptance of false alarms. We provided three example entries based on well-known, open source signal processing algorithms, to serve as a basis for comparison and as a starting point for participants to develop their own code. A total of 38 teams submitted a total of 215 entries in this year's Challenge. This editorial reviews the background issues for this challenge, the design of the challenge itself, the key achievements, and the follow-up research generated as a result of the Challenge, published in the concurrent special issue of Physiological Measurement. Additionally we make some recommendations for future changes in the field of patient monitoring as a result of the Challenge. PMID:27454172

  7. Influence of inertance on respiratory mechanics measurements in mechanically ventilated puppies.

    PubMed

    Lanteri, C J; Petak, F; Gurrin, L; Sly, P D

    1999-08-01

    The complete equation of motion for a single compartment model (SCM) includes an inertance term to describe pressure changes in phase with acceleration, as well as terms for resistance and elastance. Inertance has traditionally been excluded from the model when measuring respiratory mechanics at conventional ventilatory frequencies in mature respiratory systems. However, this omission has been questioned recently for measurements of respiratory mechanics in intubated infants where higher ventilation frequencies and smaller tracheal tubes are the norm. We investigated 1) the significance of inertance in an immature respiratory system during mechanical ventilation, and 2) the effect of omitting it from the model on estimates of respiratory mechanics. Six anesthetised, paralysed and mechanically ventilated puppies (2.6-3.9 kg) were studied. A SCM, including an inertance term was fitted to measurements of flow and airway opening (P(AO)) or transpulmonary (P(TP)) pressure using multiple linear regression to estimate respiratory system and lung resistance (R(RS), R(L)), elastance (E(RS), E(L)) and inertance (I(RS), I(L)) respectively, at various ventilation frequencies (0.2-2 Hz). Data obtained at each ventilation frequency were also fitted with a similar model without the inertance term. Inertance contributed significantly to the model at frequencies greater than approximately 0.3-0.5 Hz (20-30 breaths per minute), with I(RS) dominated by the lung. The importance of including the inertance term in the model increased as ventilation frequency increased. Exclusion of inertance from the model led to underestimation of E(RS) and E(L), but no errors in estimates of R(RS) or R(L). The errors increased with ventilation frequency to approximately 10-20% for E(RS) and approximately 10-40% for E(L) at 2 Hz. While inertance contributed significantly to the SCM at ventilation frequencies typically required to maintain normal gas exchange in puppies, the errors from excluding this

  8. False beats in coupled piano string unisons

    NASA Astrophysics Data System (ADS)

    Capleton, Brian

    2004-02-01

    The behavior of a unison pair of piano strings coupled by the soundboard bridge, when one string has localized anisotropy in the reactive part of the bridge admittance for a given partial frequency, can be investigated using a theoretical matrix description. The anisotropy can cause what in piano tuning terminology is referred to as ``false beating'' in a partial of the single string. A mathematical model can be used to illustrate how ``mistunings'' between the strings of the unison (measured when the strings are sounding in isolation from each other) may theoretically arise as a consequence of the normal practice in piano tuning, of eliminating or reducing audible beating in the unison when both strings are sounding. ``False beats'' in a single string partial can be ``inherited'' by a partial of the coupled unison's spectrum, and mistunings between the strings can eliminate or reduce the appearance of this inheritance.

  9. The problem with false vacuum Higgs inflation

    SciTech Connect

    Fairbairn, Malcolm; Grothaus, Philipp; Hogan, Robert E-mail: philipp.grothaus@kcl.ac.uk

    2014-06-01

    We investigate the possibility of using the only known fundamental scalar, the Higgs, as an inflaton with minimal coupling to gravity. The peculiar appearance of a plateau or a false vacuum in the renormalised effective scalar potential suggests that the Higgs might drive inflation. For the case of a false vacuum we use an additional singlet scalar field, motivated by the strong CP problem, and its coupling to the Higgs to lift the barrier allowing for a graceful exit from inflation by mimicking hybrid inflation. We find that this scenario is incompatible with current measurements of the Higgs mass and the QCD coupling constant and conclude that the Higgs can only be the inflaton in more complicated scenarios.

  10. Accounting for false negatives in hotspot detection

    SciTech Connect

    Sego, Landon H.; Wilson, John E.

    2007-08-28

    Hotspot sampling designs are used in environmental sampling to identify the location of one (or more) contiguous regions of elevated contamination. These regions are known as hotspots. The problem of how to calculate the probability of detecting an elliptical hotspot using a rectangular or triangular grid of sampling points was addressed by Singer and Wickman in 1969. This approach presumed that any sample which coincided with a hotspot would detect the hotspot without error. However, for many sampling methodologies, there is a chance that the hotspot will not be detected even though it has been sampled directly--a false negative. We present a mathematical solution and a numerical algorithm which account for false negatives when calculating the probability of detecting hotspots that are circular in shape.

  11. [False memory syndrome: state of the art].

    PubMed

    Nemets, Boris; Witztum, Eliezer; Kotler, Moshe

    2002-08-01

    The review describes the heated dispute on the present state of recovered traumatic memories. There are two main schools concerning the status of recovered memories of child abuse. One school believes in their authenticity unconditionally. Those who oppose the authenticity claim False Memory Syndrome's existence. They describe it as "a serious form of psychopathology characterized by strongly believed pseudomemories of childhood sexual abuse" and "condition in which a person's identity and interpersonal relationships are centered around a memory of traumatic experience which is objectively false but in which the person strongly believes". This review presents the allegations of both sides involved in the dispute, with updates of scientific and judicial references and relevant recommendations to care takers. PMID:12222139

  12. Spirit Beholds Bumpy Boulder (False Color)

    NASA Technical Reports Server (NTRS)

    2006-01-01

    As NASA's Mars Exploration Rover Spirit began collecting images for a 360-degree panorama of new terrain, the rover captured this view of a dark boulder with an interesting surface texture. The boulder sits about 40 centimeters (16 inches) tall on Martian sand about 5 meters (16 feet) away from Spirit. It is one of many dark, volcanic rock fragments -- many pocked with rounded holes called vesicles -- littering the slope of 'Low Ridge.' The rock surface facing the rover is similar in appearance to the surface texture on the outside of lava flows on Earth.

    Spirit took this false-color image with the panoramic camera on the rover's 810th sol, or Martian day, of exploring Mars (April 13, 2006). This image is a false-color rendering using camera's 753-nanometer, 535-nanometer, and 432-nanometer filters.

  13. False beats in coupled piano string unisons.

    PubMed

    Capleton, Brian

    2004-02-01

    The behavior of a unison pair of piano strings coupled by the soundboard bridge, when one string has localized anisotropy in the reactive part of the bridge admittance for a given partial frequency, can be investigated using a theoretical matrix description. The anisotropy can cause what in piano tuning terminology is referred to as "false beating" in a partial of the single string. A mathematical model can be used to illustrate how "mistunings" between the strings of the unison (measured when the strings are sounding in isolation from each other) may theoretically arise as a consequence of the normal practice in piano tuning, of eliminating or reducing audible beating in the unison when both strings are sounding. "False beats" in a single string partial can be "inherited" by a partial of the coupled unison's spectrum, and mistunings between the strings can eliminate or reduce the appearance of this inheritance. PMID:15000199

  14. False Context Fear Memory in Rats

    ERIC Educational Resources Information Center

    Bae, Sarah; Holmes, Nathan M.; Westbrook, R. Frederick

    2015-01-01

    Four experiments used rats to study false context fear memories. In Experiment 1, rats were pre-exposed to a distinctive chamber (context A) or to a control environment (context C), shocked after a delay in a second chamber (context B) and tested either in B or A. Rats pre-exposed to A froze just as much as control rats in B but more than control…

  15. Detecting false intent using eye blink measures

    PubMed Central

    Marchak, Frank M.

    2013-01-01

    Eye blink measures have been shown to be diagnostic in detecting deception regarding past acts. Here we examined—across two experiments with increasing degrees of ecological validity—whether changes in eye blinking can be used to determine false intent regarding future actions. In both experiments, half of the participants engaged in a mock crime and then transported an explosive device with the intent of delivering it to a “contact” that would use it to cause a disturbance. Eye blinking was measured for all participants when presented with three types of questions: relevant to intent to transport an explosive device, relevant to intent to engage in an unrelated illegal act, and neutral questions. Experiment 1 involved standing participants watching a video interviewer with audio presented ambiently. Experiment 2 involved standing participants questioned by a live interviewer. Across both experiments, changes in blink count during and immediately following individual questions, total number of blinks, and maximum blink time length differentiated those with false intent from truthful intent participants. In response to questions relevant to intent to deliver an explosive device vs. questions relevant to intent to deliver illegal drugs, those with false intent showed a suppression of blinking during the questions when compared to the 10 s period after the end of the questions, a lower number of blinks, and shorter maximum blink duration. The results are discussed in relation to detecting deception about past activities as well as to the similarities and differences to detecting false intent as described by prospective memory and arousal. PMID:24130546

  16. False memories in Lewy-body disease.

    PubMed

    Algarabel, Salvador; Pitarque, Alfonso; Sales, Alicia; Meléndez, Juan Carlos; Escudero, Joaquín

    2015-12-01

    Recently, de Boysson, Belleville, Phillips et al. (2011) found that patients with Lewy-body disease (LBD) showed significantly lower rates of false memories than healthy controls, using the Deese-Roediger-McDermott (DRM) experimental procedure. Given that this result could be explained by the practically null rate of true recognition in the LBD group (0.09), we decided to replicate the study by de Boysson et al. (2011), but including a new condition that would maximize the true recognition rate (and analyze its effect on the rate of false memories). Specifically, in a DRM experiment, we manipulated (within subjects) two study and recognition conditions: in the "immediate" condition, both the LBD patients and the control group of healthy older people received a different recognition test after each study list (containing twelve words associated with a non-presented critical word), while in the "delayed" condition (similar to the one in de Boysson et al., 2011), the participants received the entire series of study lists and then took only one recognition test. The results showed that, in both samples, the "immediate" condition produced higher corrected rates of both true and false recognition than the "delayed" condition, although they were both lower in the LBD patients, which shows that these patients are capable of encoding and recognizing the general similitude underlying information (gist memory) in the right conditions. PMID:26355527

  17. The false enforcement of unpopular norms.

    PubMed

    Willer, Robb; Kuwabara, Ko; Macy, Michael W

    2009-09-01

    Prevailing theory assumes that people enforce norms in order to pressure others to act in ways that they approve. Yet there are numerous examples of "unpopular norms" in which people compel each other to do things that they privately disapprove. While peer sanctioning suggests a ready explanation for why people conform to unpopular norms, it is harder to understand why they would enforce a norm they privately oppose. The authors argue that people enforce unpopular norms to show that they have complied out of genuine conviction and not because of social pressure. They use laboratory experiments to demonstrate this "false enforcement" in the context of a wine tasting and an academic text evaluation. Both studies find that participants who conformed to a norm due to social pressure then falsely enforced the norm by publicly criticizing a lone deviant. A third study shows that enforcement of a norm effectively signals the enforcer's genuine support for the norm. These results demonstrate the potential for a vicious cycle in which perceived pressures to conform to and falsely enforce an unpopular norm reinforce one another. PMID:20614762

  18. Characteristics of false allegation adult crimes.

    PubMed

    McNamara, James J; McDonald, Sean; Lawrence, Jennifer M

    2012-05-01

    The purpose of this study was to identify common factors in false allegation adult crimes, by examining the dynamics involved in 30 confirmed false allegation cases. The authors conducted a comprehensive review of these adjudicated cases and then completed a collection instrument to capture offender demographics, offense characteristics, and motive. The results indicated that most false allegation crimes were committed by women (73.3%) and Caucasians (93.3%). Data indicated that more interpersonally violent allegations were primarily motivated by attention/sympathy needs (50.0%), whereas more impersonal offenses involved other motivations such as providing an alibi (16.7%) or profit (13.3%). Offenders tended to be younger, high school graduates with no higher education (43.3%). A total of 23.3% of offenders had a prior criminal history. Male offenders appeared as likely as women to be motivated by attention/sympathy; however, men tended to select more violent, nonsexual offenses (e.g., attempted murder) than women. PMID:22236499

  19. Evaluating promotional claims as false or misleading.

    PubMed

    Brushwood, David B; Knox, Caitlin A; Liu, Wei; Jenkins, Kevin A

    2013-11-01

    In light of the "false or misleading" standard resulting from the recent legal ruling, it can be concluded that a true claim is one that is both factually and analytically true. Factual truth could be based on the accuracy of the information and the sufficiency of the information. Analytical truth could be based on the scientific foundation for the claim and whether the information within the claim is presented in a balanced way. Regarding the assessment of whether a truthful claim is misleading, the evaluator could consider the relevance, consistency, and context of the information. Standards are important in medication use and medication regulation. Health care professionals who must decide whether a claim is truthful and not misleading will rely on guidance from FDA in determining how to evaluate promotional claims. As the court suggested in the case reviewed here, FDA could take the lead and provide guidance "in differentiating between misleading and false promotion, exaggerations and embellishments, and truthful or non-misleading information." Existing FDA regulations provide a foundation for such guidance. The next step for the agency would be to expand existing guidance to specifically describe how an off-label claim can be identified as either false or misleading. PMID:24128969

  20. Uranus in True and False Color

    NASA Technical Reports Server (NTRS)

    1986-01-01

    These two pictures of Uranus -- one in true color (left) and the other in false color -- were compiled from images returned Jan. 17, 1986, by the narrow-angle camera of Voyager 2. The spacecraft was 9.1 million kilometers (5.7 million miles) from the planet, several days from closest approach. The picture at left has been processed to show Uranus as human eyes would see it from the vantage point of the spacecraft. The picture is a composite of images taken through blue, green and orange filters. The darker shadings at the upper right of the disk correspond to the day-night boundary on the planet. Beyond this boundary lies the hidden northern hemisphere of Uranus, which currently remains in total darkness as the planet rotates. The blue-green color results from the absorption of red light by methane gas in Uranus' deep, cold and remarkably clear atmosphere. The picture at right uses false color and extreme contrast enhancement to bring out subtle details in the polar region of Uranus. Images obtained through ultraviolet, violet and orange filters were respectively converted to the same blue, green and red colors used to produce the picture at left. The very slight contrasts visible in true color are greatly exaggerated here. In this false-color picture, Uranus reveals a dark polar hood surrounded by a series of progressively lighter concentric bands. One possible explanation is that a brownish haze or smog, concentrated over the pole, is arranged into bands by zonal motions of the upper atmosphere. The bright orange and yellow strip at the lower edge of the planet's limb is an artifact of the image enhancement. In fact, the limb is dark and uniform in color around the planet. The Voyager project is manages for NASA by the Jet Propulsion Laboratory.

  1. Inertance estimation in a lumped-parameter hydraulic simulator of human circulation.

    PubMed

    Lanzarone, Ettore; Ruggeri, Fabrizio

    2013-06-01

    Pulsatile mock loop systems are largely used to investigate the cardiovascular system in vitro. They consist of a pump, which replicates the heart, coupled with a lumped-parameter hydraulic afterload, which simulates vasculature. An accurate dimensioning of components is required for a reliable mimicking of the physiopathological behavior of the system. However, it is not possible to create a component for the afterload inertance, and inertance contributions are present in the entire circuit. Hence, in the literature, inertance is neglected or qualitatively evaluated. In this paper, we propose two quantitative methods (Maximum-likelihood estimation (MLE) and Bayesian estimation) for estimating afterload inertance based on observed pressure and flow waveforms. These methods are also applied to a real mock loop system. Results show that the system has an inertance comparable with the literature reference value of the entire systemic circulation, and that the expected variations over inlet average flow and pulse frequency are in general confirmed. Comparing the methods, the Bayesian approach results in higher and more stable estimations than the classical MLE. PMID:23699724

  2. Report on the source of the electrochemical impedance on cermet inert anodes

    SciTech Connect

    Windisch, C.F. Jr.; Stice, N.D.

    1991-02-01

    the Inert Electrode Program at Pacific Northwest Laboratory (PNL) is supported by the Office of Industrial Processes of the US Department of Energy and is aimed at improving the energy efficiency of Hall-Heroult cells through the development of inert anodes. The inert anodes currently under study are composed of a cermet material of the general composition NiO-NiFe{sub 2}O{sub 4}-Cu. The program has three primary objectives: (a) to evaluate the anode material in a scaled-up, pilot cell facility, (b) to investigate the mechanisms of the electrochemical reactions at the anode surface, and (c) to develop sensors for monitoring anode and/or electrolyte conditions. This report covers the results of a portion of the studies on anode reaction mechanisms. The electrochemical impedances of cermet inert anodes in alumina-saturated molten cryolite as a function of frequency, current density, and time indicated that a significant component of the impedance is due to the gas bubbles produced at the anode during electrolysis. The data also showed a connection between surface structure and impedance that appears to be related to the effects of surface structure on bubble flow. Given the results of this work, it is doubtful that a resistive film contributes significantly to the electrochemical impedances on inert anodes. Properties previously assigned to such a film are more likely due to the bubbles and those factors that affect the properties and dynamics of the bubbles at the anode surface. 12 refs., 16 figs., 3 tabs.

  3. Feedback control unit with an inerter proof-mass electrodynamic actuator

    NASA Astrophysics Data System (ADS)

    Zilletti, Michele

    2016-05-01

    In this study the use of an inerter is considered for active vibration control of a structure excited by white noise. The structure is modelled as a single degree of freedom system and the control system consists of a vibration absorber with a mass suspended on a spring, a damper and an inerter. The absorber is equipped with a reactive force transducer in parallel with the passive suspension which is driven with a signal proportional to the velocity of the structure under control measured by an ideal collocated sensor. The effect of the inerter on the control stability and performance of the control system is investigated. It is shown that the effect of the inerter is to reduce the natural frequency of the inertial actuator, improving the stability of the feedback loop and thus its performance. The optimisation of the physical and control parameters of the control system such as the internal damping of the actuator, its natural frequency, its inertance and the feedback gain are considered such that either the kinetic energy of the host structure is minimised or the power dissipated by the control system is maximised.

  4. Quantum efficiency and false positive rate

    PubMed Central

    Hallett, P. E.

    1969-01-01

    1. This paper presents an analysis of the efficiency of performance at the absolute threshold of human vision. The data are from the same series as the previous papers (Hallett, 1969b, c) and consist of frequency-of-seeing curves, thresholds, false positive rates and equivalent background measurements, accumulated as small samples over a number of days. 2. Quantum efficiency is defined here as the ratio of the thresholds of an ideal and a real detector performing the same task with the same sampling error. This avoids the problem as to whether the frequency-of-seeing curve of the real detector is exactly a Poisson sum or not. 3. The long-term quantum efficiency can be low (about 0·04) as a result of drifts in the mean threshold. 4. The average short-term quantum efficiency is in the region of 0·1, which is roughly the physiological limit set by Rushton's (1956b) measurements of rhodopsin density in the living rods. If this is correct, then the absorption of a quantum, and not the bleaching of a rhodopsin molecule, is sufficient for the generation of a neural event. 5. Application of a simple signal/noise theory to the data gives solutions close to those suggested by Barlow (1956) and shows that false positives almost invariably arise from errors subsequent to the signal/noise decision process. PMID:5784295

  5. Why most published research findings are false.

    PubMed

    Ioannidis, John P A

    2005-08-01

    There is increasing concern that most current published research findings are false. The probability that a research claim is true may depend on study power and bias, the number of other studies on the same question, and, importantly, the ratio of true to no relationships among the relationships probed in each scientific field. In this framework, a research finding is less likely to be true when the studies conducted in a field are smaller; when effect sizes are smaller; when there is a greater number and lesser preselection of tested relationships; where there is greater flexibility in designs, definitions, outcomes, and analytical modes; when there is greater financial and other interest and prejudice; and when more teams are involved in a scientific field in chase of statistical significance. Simulations show that for most study designs and settings, it is more likely for a research claim to be false than true. Moreover, for many current scientific fields, claimed research findings may often be simply accurate measures of the prevailing bias. In this essay, I discuss the implications of these problems for the conduct and interpretation of research. PMID:16060722

  6. On False-Positive and False-Negative Decisions with a Mastery Test.

    ERIC Educational Resources Information Center

    Wilcox, Rand R.

    Wilcox (1977) examines two methods of estimating the probability of a false-positive on false-negative decision with a mastery test. Both procedures make assumptions about the form of the true score distribution which might not give good results in all situations. In this paper, upper and lower bounds on the two possible error types are described…

  7. Remembering, imagining, false memories & personal meanings.

    PubMed

    Conway, Martin A; Loveday, Catherine

    2015-05-01

    The Self-Memory System encompasses the working self, autobiographical memory and episodic memory. Specific autobiographical memories are patterns of activation over knowledge structures in autobiographical and episodic memory brought about by the activating effect of cues. The working self can elaborate cues based on the knowledge they initially activate and so control the construction of memories of the past and the future. It is proposed that such construction takes place in the remembering-imagining system - a window of highly accessible recent memories and simulations of near future events. How this malfunctions in various disorders is considered as are the implication of what we term the modern view of human memory for notions of memory accuracy. We show how all memories are to some degree false and that the main role of memories lies in generating personal meanings. PMID:25592676

  8. Layered Outcrops in Gusev Crater (False Color)

    NASA Technical Reports Server (NTRS)

    2004-01-01

    One of the ways scientists collect mineralogical data about rocks on Mars is to view them through filters that allow only specific wavelengths of light to pass through the lens of the panoramic camera. NASA's Mars Exploration Rover Spirit took this false-color image of the rock nicknamed 'Tetl' at 1:05 p.m. martian time on its 270th martian day, or sol (Oct. 5, 2004) using the panoramic camera's 750-, 530-, and 430-nanometer filters. Darker red hues in the image correspond to greater concentrations of oxidized soil and dust. Bluer hues correspond to portions of rock that are not as heavily coated with soils or are not as highly oxidized.

  9. Spirit Scans Winter Haven (False Color)

    NASA Technical Reports Server (NTRS)

    2006-01-01

    At least three different kinds of rocks await scientific analysis at the place where NASA's Mars Exploration Rover Spirit will likely spend several months of Martian winter. They are visible in this picture, which the panoramic camera on Spirit acquired during the rover's 809th sol, or Martian day, of exploring Mars (April 12, 2006). Paper-thin layers of light-toned, jagged-edged rocks protrude horizontally from beneath small sand drifts; a light gray rock with smooth, rounded edges sits atop the sand drifts; and several dark gray to black, angular rocks with vesicles (small holes) typical of hardened lava lie scattered across the sand.

    This view is a false-color rendering that combines images taken through the panoramic camera's 753-nanometer, 535-nanometer, and 432-nanometer filters.

  10. Some comments on GMTI false alarm rate

    NASA Astrophysics Data System (ADS)

    Doerry, A. W.

    2011-06-01

    A typical Ground Moving Target Indicator (GMTI) radar specification includes the parameters Probability of Detection (PD) - typically on the order of 0.85, and False Alarm Rate (FAR) - typically on the order of 0.1 Hz. The PD is normally associated with a particular target 'size', such as Radar Cross Section (RCS) with perhaps some statistical description (e.g. Swerling number). However, the concept of FAR is embodied at a fundamental level in the detection process, which traditionally employs a Constant-FAR (CFAR) detector to set thresholds for initial decisions on whether a target is present or not. While useful, such a metric for radar specification and system comparison is not without some serious shortcomings. In particular, when comparing FAR across various radar systems, some degree of normalization needs to occur to account for perhaps swath width and scan rates. This in turn suggests some useful testing strategies.

  11. False accusations of physical and sexual abuse.

    PubMed

    Schuman, D C

    1986-01-01

    Child sexual abuse is sometimes mistakenly over-reported. This discussion of seven cases focuses on one potential area which can generate a substantial segment of false positives: conflicted domestic relations litigation situation. Such situations generate striking, regressive affect and behavior especially when issues of child custody or visitation erupt. Parental regression has been discussed in the literature, but children regress too: behavioral symptoms erupt with vegetative and social disruption, and instinctual material regarding both sex and anger is more accessible to consciousness than is age-appropriate. Heightened instinctual forces in children and regressive loosening of pre-litigation character defenses in adults, both in the context of stressful family breakdown, combine to generate genuine perceptions of abuse but invalid reports. PMID:3697518

  12. Opportunity View of 'Gilbert' Layer (False Color)

    NASA Technical Reports Server (NTRS)

    2008-01-01

    This view from NASA's Mars Exploration Rover Opportunity shows bedock within a stratigraphic layer informally named 'Gilbert,' which is the rover's next target after completing an examination of three stratigtaphic layers forming a bright band around the inside of Victoria Crater. The rover will descend deeper into the crater to reach the Gilbert layer.

    Opportunity used its panoramic camera (Pancam) to capture this image with low-sun angle at a local solar time of 3:30 p.m. during the rover's 1,429th Martian day, of sol (Jan. 31, 2008).

    This view combines separate images taken through the Pancam filters centered on wavelengths of 753 nanometers, 535 nanometers and 432 nanometers. It is presented in a false-color stretch to bring out subtle color differences in the scene.

  13. Dynamics and instability of false vacuum bubbles

    SciTech Connect

    Aguirre, Anthony; Johnson, Matthew C.

    2005-11-15

    This paper examines the classical dynamics of false-vacuum regions embedded in surrounding regions of true vacuum, in the thin-wall limit. The dynamics of all generally relativistically allowed solutions--most but not all of which have been previously studied--are derived, enumerated, and interpreted. We comment on the relation of these solutions to possible mechanisms whereby inflating regions may be spawned from noninflating ones. We then calculate the dynamics of first-order deviations from spherical symmetry, finding that many solutions are unstable to such aspherical perturbations. The parameter space in which the perturbations on bound solutions inevitably become nonlinear is mapped. This instability has consequences for the Farhi-Guth-Guven mechanism for baby universe production via quantum tunneling.

  14. False context fear memory in rats.

    PubMed

    Bae, Sarah E; Holmes, Nathan M; Westbrook, R Frederick

    2015-10-01

    Four experiments used rats to study false context fear memories. In Experiment 1, rats were pre-exposed to a distinctive chamber (context A) or to a control environment (context C), shocked after a delay in a second chamber (context B) and tested either in B or A. Rats pre-exposed to A froze just as much as control rats in B but more than control rats in A. In Experiment 2, rats were pre-exposed to A or C, subjected to an immediate shock in B and tested in B or A. Rats pre-exposed to A froze when tested in A but did not freeze when tested in B and control rats did not freeze in either A or B. The false fear memory to the pre-exposed A was contingent on its similarity with the shocked B. In Experiment 3, rats pre-exposed to A and subjected to immediate shock in B froze when tested in A but did not freeze when tested in C and rats pre-exposed to C did not freeze when tested either in A or C. In Experiment 4, rats pre-exposed to A and subjected to immediate shock in B froze more when tested in A than rats whose pre-exposure to A began with an immediate shock. The results were discussed in terms of a dual systems explanation of context fear conditioning: a hippocampal-dependent process that forms a unitary representation of context and an amygdala-based process which associates this representation with shock. PMID:26373831

  15. Controlled high-rate-strain shear bands in inert and reactant porous materials

    NASA Astrophysics Data System (ADS)

    Nesterenko, V. F.

    1998-07-01

    Shear localization is considered as one of the main reasons for initiation of chemical reaction in energetic materials under dynamic loading. However despite of widely spread recognition of the importance of rapid shear flow the shear bands in porous heterogeneous materials did not become an object of research. The primary reason for this was a lack of appropriate experimental method. The "Thick-Walled Cylinder" method, which allows to reproduce shear bands in strain controlled conditions, was initially proposed by Nesterenko et al., 1989 for solid inert materials and then modified by Nesterenko, Meyers et al., 1994 to fit porous inert and energetic materials. The method allows to reproduce the array of shear bands with shear strains 10-100 and strain rate 107s-1. Experimental results are presented for inert materials (granular, fractured ceramics) and for reactant porous mixtures (Nb-Si, Ti-Si, Ti-graphite and Ti-ultrafine diamond).

  16. Inert electrode composition having agent for controlling oxide growth on electrode made therefrom

    DOEpatents

    Ray, S.P.

    1986-04-15

    An improved inert electrode composition is suitable for use as an inert electrode in the production of metals such as aluminum by the electrolytic reduction of metal oxide or metal salt dissolved in a molten salt bath. The composition comprises one or more metal alloys and metal compounds which may include oxides of the metals comprising the alloy. The alloy and metal compounds are interwoven in a network which provides improved electrical conductivity and mechanical strength while preserving the level of chemical inertness necessary for such an electrode to function satisfactorily. The electrode composition further includes a metal compound dopant which will aid in controlling the thickness of a protective oxide layer on at least the bottom portion of an electrode made therefrom during use. 12 figs.

  17. Inert electrode composition having agent for controlling oxide growth on electrode made therefrom

    DOEpatents

    Ray, Siba P.

    1986-01-01

    An improved inert electrode composition is suitable for use as an inert electrode in the production of metals such as aluminum by the electrolytic reduction of metal oxide or metal salt dissolved in a molten salt bath. The composition comprises one or more metal alloys and metal compounds which may include oxides of the metals comprising the alloy. The alloy and metal compounds are interwoven in a network which provides improved electrical conductivity and mechanical strength while preserving the level of chemical inertness necessary for such an electrode to function satisfactorily. The electrode composition further includes a metal compound dopant which will aid in controlling the thickness of a protective oxide layer on at least the bottom portion of an electrode made therefrom during use.

  18. Nanotoxicity of Inert Materials: The Case of Gold, Silver and Iron.

    PubMed

    Umair, Muhammad; Javed, Ibrahim; Rehman, Mubashar; Madni, Asadullah; Javeed, Aqeel; Ghafoor, Aamir; Ashraf, Muhammad

    2016-01-01

    Nanotechnology has opened a new horizon of research in various fields including applied physics, chemistry, electronics, optics, robotics, biotechnology and medicine. In the biomedical field, nanomaterials have shown remarkable potential as theranostic agents. Materials which are considered inert are often used in nanomedicine owning to their nontoxic profile. At nanoscale, these inert materials have shown unique properties that differ from bulk and dissolved counterparts. In the case of metals, this unique behavior not only imparts paramount advantages but also confers toxicity due to their unwanted interaction with different cellular processes. In the literature, the toxicity of nanoparticles made from inert materials has been investigated and many of these have revealed toxic potential under specific conditions. The surge to understand underlying mechanism of toxicity has increased and different means have been employed to overcome toxicity problems associated with these agents. In this review, we have focused nanoparticles of three inert metallic materials i.e. gold, silver and iron as these are regarded as biologically inert in the bulk and dissolved form. These materials have gained wider research interest and studies indicating the toxicity of these materials are also emerging. Oxidative stress, physical binding and interference with intracellular signaling are the major role player in nanotoxicity and their predominance is highly dependent upon size, surface coating and administered dose of nanoparticles. Current strategies to overcome toxicity have also been reviewed in the light of recent literature. The authors also suggested that uniform testing standards and well-designed studies are needed to evaluate nanotoxicity of these materials that are otherwise considered as inert. This article is open to POST-PUBLICATION REVIEW. Registered readers (see "For Readers") may comment by clicking on ABSTRACT on the issue's contents page. PMID:27518167

  19. Absorption removal of sulfur dioxide by falling water droplets in the presence of inert solid particles

    NASA Astrophysics Data System (ADS)

    Liu, I.-Hung; Chang, Ching-Yuan; Liu, Su-Chin; Chang, I.-Cheng; Shih, Shin-Min

    An experimental analysis of the absorption removal of sulfur dioxide by the free falling water droplets containing the inert solid particles is presented. The wheat flour powder is introduced as the inert solid particles. Tests with and without the flour powder in the water droplets are examined. The mass fluxes and mass transfer coefficients of SO 2 for the cases with and without the flour powder are compared to elucidate the effects of the inert solid particles contained in the water droplets on the gas absorption. The results indicate aignificant difference between the two cases for the concentrations of the flour powder in the absorbent droplets ( Cs) within the ranges of the experimental conditions, namely 0.1 to 10 wt% flour powder in the absorbent droplets. In general, the inert solid particles of the flour powder as the impurities in the water droplets tend to decrease the SO 2 absorption rate for the experimental absorption system under investigation. Various values of Cs cause various levels of the interfacial resistance and affect the gas absorption rate. The interfacial resistance is recognized by introducing an interfacial mass transfer coefficient ks with its reciprocal being proportional to the magnitude of the interfacial resistance. The values of 1/ ks may be computed by the use of the equation 1/ ks=(1/ KOLs-1/ KOL), where KOLs and KOL are the overall liquid-phase mass transfer coefficients with and without the inert solid particles, respectively. The values of ks with Cs of 0.1 to 10 wt% are about 0.295-0.032 cms -1 for absorbing 1000-3000 ppmv SO 2 with the water droplets. This kind of information is useful for the SO 2 removal and the information of acid rain that the impurities of the inert solid particles contaminate the water droplets.

  20. Continuous injection of an inert gas through a drill rig for drilling into potentially hazardous areas

    SciTech Connect

    McCormick, S.H.; Pigott, W.R.

    1998-04-01

    A drill rig for drilling in potentially hazardous areas includes a drill having conventional features such as a frame, a gear motor, gear box, and a drive. A hollow rotating shaft projects through the drive and frame. An auger, connected to the shaft is provided with a multiplicity of holes. An inert gas is supplied to the hollow shaft and directed from the rotating shaft to the holes in the auger. The inert gas flows down the hollow shaft, and then down the hollow auger, and out through the holes in the bottom of the auger into the potentially hazardous area.