Science.gov

Sample records for 2011-10-01 false valves

  1. 49 CFR 236.383 - Valve locks, valves, and valve magnets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Valve locks, valves, and valve magnets. 236.383... Inspection and Tests § 236.383 Valve locks, valves, and valve magnets. Valve locks on valves of the non-cut-off type shall be tested at least once every three months, and valves and valve magnets shall...

  2. 42 CFR 84.92 - Exhalation valve leakage test.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Exhalation valve leakage test. 84.92 Section 84.92... Breathing Apparatus § 84.92 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be...) Leakage between the valve and the valve seat shall not exceed 30 milliliters per minute....

  3. 49 CFR 179.500-11 - Loading and unloading valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Loading and unloading valves. 179.500-11 Section... 107A) § 179.500-11 Loading and unloading valves. (a) Loading and unloading valve or valves shall be mounted on the cover or threaded into the marked end of tank. These valves shall be of approved type,...

  4. 49 CFR 195.116 - Valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Valves. 195.116 Section 195.116 Transportation... PIPELINE Design Requirements § 195.116 Valves. Each valve installed in a pipeline system must comply with the following: (a) The valve must be of a sound engineering design. (b) Materials subject to...

  5. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Valve maintenance. 195.420 Section 195.420... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each valve..., inspect each mainline valve to determine that it is functioning properly. (c) Each operator shall...

  6. 42 CFR 84.1150 - Exhalation valve leakage test; minimum requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Exhalation valve leakage test; minimum requirements... Combination Gas Masks § 84.1150 Exhalation valve leakage test; minimum requirements. (a) Dry exhalation valves... operating position. (b) Leakage between the valve and valve seat shall not exceed 30 milliliters per minute....

  7. 49 CFR 230.49 - Setting of safety relief valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... safety relief valve shall be set to open at a pressure not exceeding the MAWP. Safety relief valves shall... glass. (d) Labeling of lowest set pressure. The set pressure of the lowest safety relief valve shall be... 49 Transportation 4 2011-10-01 2011-10-01 false Setting of safety relief valves. 230.49...

  8. 46 CFR 154.1125 - Pipes, fittings, and valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Pipes, fittings, and valves. 154.1125 Section 154.1125... Firefighting § 154.1125 Pipes, fittings, and valves. (a) Each pipe, fitting, and valve for each water spray... listed in § 154.1110 must have at least one isolation valve at each branch connection and at least...

  9. 46 CFR 105.25-20 - Shutoff valves required.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Shutoff valves required. 105.25-20 Section 105.25-20... Installed Below Decks § 105.25-20 Shutoff valves required. (a) Shutoff valves shall be provided in the suction lines as close to the tanks as possible. The valves shall be installed so as to shut off...

  10. 49 CFR 195.258 - Valves: General.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Valves: General. 195.258 Section 195.258... PIPELINE Construction § 195.258 Valves: General. (a) Each valve must be installed in a location that is accessible to authorized employees and that is protected from damage or tampering. (b) Each submerged...

  11. 49 CFR 179.300-13 - Venting, loading and unloading valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Venting, loading and unloading valves. 179.300-13..., loading and unloading valves. (a) Valves shall be of approved type, made of metal not subject to rapid deterioration by lading, and shall withstand tank test pressure without leakage. The valves shall be...

  12. 42 CFR 84.204 - Exhalation valve leakage test; minimum requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Exhalation valve leakage test; minimum requirements... Chemical Cartridge Respirators § 84.204 Exhalation valve leakage test; minimum requirements. (a) Dry... normal operating position. (b) Leakage between the valve and valve seat shall not exceed 30...

  13. 46 CFR 154.806 - Capacity of pressure relief valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Capacity of pressure relief valves. 154.806 Section 154... Equipment Cargo Vent Systems § 154.806 Capacity of pressure relief valves. Pressure relief valves for each cargo tank must have a combined relief capacity, including the effects of back pressure from vent...

  14. 46 CFR 105.10-20 - Pressure vacuum relief valve.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in...

  15. 49 CFR 230.52 - Water glass valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Water glass valves. 230.52 Section 230.52... Water Glasses and Gauge Cocks § 230.52 Water glass valves. All water glasses shall be equipped with no more than two valves capable of isolating the water glass from the boiler. They shall also be...

  16. 49 CFR 192.181 - Distribution line valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Distribution line valves. 192.181 Section 192.181... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Design of Pipeline Components § 192.181 Distribution line valves. (a) Each high-pressure distribution system must have valves spaced so as to reduce...

  17. 46 CFR 176.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Breaking of safety valve seals. 176.704 Section 176.704... TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.704 Breaking of safety valve seals... the seal on a boiler safety valve on a vessel is broken....

  18. 46 CFR 115.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Breaking of safety valve seals. 115.704 Section 115.704... CERTIFICATION Repairs and Alterations § 115.704 Breaking of safety valve seals. The owner, managing operator, or master shall notify the cognizant OCMI as soon as practicable after the seal on a boiler safety valve...

  19. 46 CFR 64.59 - Spring loaded pressure relief valve.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Spring loaded pressure relief valve. 64.59 Section 64.59... AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.59 Spring loaded pressure relief valve. A spring loaded pressure relief valve must— (a) Be set at a...

  20. 49 CFR 192.193 - Valve installation in plastic pipe.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Valve installation in plastic pipe. 192.193... Components § 192.193 Valve installation in plastic pipe. Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the...

  1. 46 CFR 154.1846 - Relief valves: Changing set pressure.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) At each relief valve. ... 46 Shipping 5 2011-10-01 2011-10-01 false Relief valves: Changing set pressure. 154.1846 Section... Relief valves: Changing set pressure. The master shall: (a) Supervise the changing of the set pressure...

  2. 46 CFR 154.1315 - Restricted gauge excess flow valve.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Restricted gauge excess flow valve. 154.1315 Section 154... Equipment Instrumentation § 154.1315 Restricted gauge excess flow valve. Each restricted gauge that penetrates a cargo tank must have an excess flow valve unless the gauge meets § 154.536....

  3. 46 CFR 154.550 - Excess flow valve: Bypass.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Excess flow valve: Bypass. 154.550 Section 154.550 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.550 Excess flow valve: Bypass. If the excess flow valve allowed...

  4. 46 CFR 154.546 - Excess flow valve: Closing flow.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Excess flow valve: Closing flow. 154.546 Section 154.546... and Process Piping Systems § 154.546 Excess flow valve: Closing flow. (a) The rated closing flow of vapor or liquid cargo for an excess flow valve must be specially approved by the Commandant (CG-522)....

  5. 46 CFR 64.41 - Stop valve closure.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Stop valve closure. 64.41 Section 64.41 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Standards for an MPT § 64.41 Stop valve closure. A stop valve that operates by a...

  6. 46 CFR 153.980 - Isolation of automatic closing valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Isolation of automatic closing valves. 153.980 Section... Transfer Procedures § 153.980 Isolation of automatic closing valves. The person in charge of cargo transfer may isolate automatic closing valves described in § 153.408(b) from a cargo containment system if...

  7. 49 CFR 236.837 - Valve, electro-pneumatic.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Valve, electro-pneumatic. 236.837 Section 236.837 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Valve, electro-pneumatic. A valve electrically operated which, when operated, will permit or...

  8. 46 CFR 64.39 - Valve securing device.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Valve securing device. 64.39 Section 64.39 Shipping... CARGO HANDLING SYSTEMS Standards for an MPT § 64.39 Valve securing device. Each filling and discharge valve must have a securing device to prevent unintentional opening....

  9. 46 CFR 122.608 - Fuel shutoff valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Fuel shutoff valves. 122.608 Section 122.608 Shipping....608 Fuel shutoff valves. Remote fuel shutoff stations must be marked in clearly legible letters at least 25 millimeters (1 inch) high indicating purpose of the valve and direction of operations....

  10. 46 CFR 78.47-38 - Valves and closing appliances.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Valves and closing appliances. 78.47-38 Section 78.47-38... Fire and Emergency Equipment, Etc. § 78.47-38 Valves and closing appliances. (a) All valves and closing... direction of operation. In all cases indication shall be provided to show whether the control is open...

  11. 46 CFR 154.519 - Piping relief valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Piping relief valves. 154.519 Section 154.519 Shipping... Process Piping Systems § 154.519 Piping relief valves. (a) The liquid relief valve that protects the cargo piping system from liquid pressure exceeding the design pressure must discharge into: (1) A cargo...

  12. 46 CFR 45.155 - Inlets and discharge piping: Valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Inlets and discharge piping: Valves. 45.155 Section 45... LINES Conditions of Assignment § 45.155 Inlets and discharge piping: Valves. (a) Except as provided in... not have continuous bilge water monitoring, a valve described in paragraph (a)(1) of this section...

  13. 46 CFR 64.67 - Shutoff valve.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Shutoff valve. 64.67 Section 64.67 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.67 Shutoff valve. A shutoff...

  14. 42 CFR 84.137 - Inhalation and exhalation valves; check valves; minimum requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Inhalation and exhalation valves; check valves; minimum requirements. 84.137 Section 84.137 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air Respirators...

  15. 46 CFR 196.30-20 - Breaking of safety valve seal.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Breaking of safety valve seal. 196.30-20 Section 196.30... OPERATIONS Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-20 Breaking of safety valve seal. (a) If at any time it is necessary to break the seal on a safety valve for any purpose, the...

  16. 49 CFR 179.400-21 - Test of pressure relief valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 107A) § 179.400-21 Test of pressure relief valves. Each valve must be tested with air or gas for... 49 Transportation 3 2011-10-01 2011-10-01 false Test of pressure relief valves. 179.400-21 Section 179.400-21 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE...

  17. 49 CFR 179.220-24 - Tests of pressure relief valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... pressure relief valves. Each safety relief valve must be tested by air or gas for compliance with § 179.15... 49 Transportation 3 2011-10-01 2011-10-01 false Tests of pressure relief valves. 179.220-24 Section 179.220-24 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE...

  18. 46 CFR 38.25-10 - Safety relief valves-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... and Inspections § 38.25-10 Safety relief valves—TB/ALL. (a) The cargo tank safety relief valves shall be inspected at least once in every 2 years. (b) The safety relief valve discs must be lifted from... 46 Shipping 1 2011-10-01 2011-10-01 false Safety relief valves-TB/ALL. 38.25-10 Section...

  19. 49 CFR 179.200-23 - Tests of pressure relief valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... pressure relief valves. (a) Each valve shall be tested by air or gas for compliance with § 179.15 before... 49 Transportation 3 2011-10-01 2011-10-01 false Tests of pressure relief valves. 179.200-23 Section 179.200-23 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE...

  20. 46 CFR 154.1310 - Closed gauge shut-off valve.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Closed gauge shut-off valve. 154.1310 Section 154.1310... Instrumentation § 154.1310 Closed gauge shut-off valve. Each closed gauge that is not mounted directly on the cargo tank must have a shut-off valve that is as close to the tank as practical....

  1. 46 CFR 64.91 - Relief valve for the cargo pump discharge.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Relief valve for the cargo pump discharge. 64.91 Section... PORTABLE TANKS AND CARGO HANDLING SYSTEMS Cargo Handling System § 64.91 Relief valve for the cargo pump discharge. The cargo pump discharge must have a relief valve that is— (a) Fitted between the cargo...

  2. 49 CFR 192.747 - Valve maintenance: Distribution systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Valve maintenance: Distribution systems. 192.747... maintenance: Distribution systems. (a) Each valve, the use of which may be necessary for the safe operation of a distribution system, must be checked and serviced at intervals not exceeding 15 months, but...

  3. 46 CFR 185.608 - Fuel shutoff valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Fuel shutoff valves. 185.608 Section 185.608 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.608 Fuel shutoff valves. Remote fuel shutoff stations must be marked...

  4. 46 CFR 169.746 - Fuel shutoff valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Fuel shutoff valves. 169.746 Section 169.746 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.746 Fuel shutoff valves. Each remote...

  5. 46 CFR 109.333 - Fire main cutoff valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Fire main cutoff valves. 109.333 Section 109.333 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Operation and Stowage of Safety Equipment § 109.333 Fire main cutoff valves. The master or person in charge shall insure that each fire main...

  6. 46 CFR 78.17-5 - Valves and closing appliances.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Valves and closing appliances. 78.17-5 Section 78.17-5..., Drills, and Inspections § 78.17-5 Valves and closing appliances. (a) It shall be the duty of the master... port lights, closing mechanism of scuppers, ash chutes, and rubbish chutes, the closing of which...

  7. 46 CFR 153.283 - Valving for cargo piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Valving for cargo piping. 153.283 Section 153.283... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.283 Valving for cargo piping. (a) Except as described in...

  8. 46 CFR 108.443 - Controls and valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Controls and valves. 108.443 Section 108.443 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire Extinguishing Systems Fixed Carbon Dioxide Fire Extinguishing Systems § 108.443 Controls and valves. (a) At least one control...

  9. 49 CFR 192.745 - Valve maintenance: Transmission lines.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Valve maintenance: Transmission lines. 192.745 Section 192.745 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND... maintenance: Transmission lines. (a) Each transmission line valve that might be required during any...

  10. 49 CFR 192.179 - Transmission line valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Transmission line valves. 192.179 Section 192.179... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Design of Pipeline Components § 192.179 Transmission line valves. (a) Each transmission line, other than offshore segments, must have sectionalizing...

  11. 46 CFR 153.285 - Valving for cargo pump manifolds.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Valving for cargo pump manifolds. 153.285 Section 153... Piping Systems and Cargo Handling Equipment § 153.285 Valving for cargo pump manifolds. (a) When cargo lines serving different tanks enter a pumproom and connect to the same pump: (1) Each cargo line...

  12. 42 CFR 84.158 - Exhalation valve leakage test.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Exhalation valve leakage test. 84.158 Section 84.158 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air Respirators § 84.158 Exhalation valve leakage...

  13. 49 CFR 229.47 - Emergency brake valve.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Emergency brake valve. 229.47 Section 229.47..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Brake System § 229.47 Emergency brake valve. (a) Except for locomotives with cabs designed for occupancy by only one person,...

  14. 49 CFR 178.255-7 - Protection of valves and accessories.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Protection of valves and accessories. 178.255-7 Section 178.255-7 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND... PACKAGINGS Specifications for Portable Tanks § 178.255-7 Protection of valves and accessories. (a) All...

  15. 46 CFR 32.20-5 - Pressure vacuum relief valves-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Pressure vacuum relief valves-TB/ALL. 32.20-5 Section 32..., AND HULL REQUIREMENTS Equipment Installations § 32.20-5 Pressure vacuum relief valves—TB/ALL. The pressure vacuum relief valve shall be of a type and size approved by the Commandant for the...

  16. 46 CFR 30.10-55 - Pressure vacuum relief valve-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Pressure vacuum relief valve-TB/ALL. 30.10-55 Section 30... Definitions § 30.10-55 Pressure vacuum relief valve—TB/ALL. The term pressure vacuum relief valve means any... pressure or vacuum in enclosed places....

  17. 46 CFR 36.10-1 - Cargo pump relief valves-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Cargo pump relief valves-TB/ALL. 36.10-1 Section 36.10-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS ELEVATED TEMPERATURE CARGOES Piping, Valves, Fittings, and Accessory Equipment § 36.10-1 Cargo pump relief valves—TB/ALL. (a) Cargo...

  18. 49 CFR 236.508 - Interference with application of brakes by means of brake valve.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Interference with application of brakes by means of brake valve. 236.508 Section 236.508 Transportation Other Regulations Relating to Transportation... Interference with application of brakes by means of brake valve. The automatic train stop, train control,...

  19. 46 CFR 64.37 - Valve and fitting guard.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Valve and fitting guard. 64.37 Section 64.37 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND... be protected from mechanical damage by— (a) The tank; (b) A tank saddle; (c) The framework; or (d)...

  20. 42 CFR 84.123 - Exhalation valve leakage test.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Exhalation valve leakage test. 84.123 Section 84.123 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Gas Masks §...

  1. 49 CFR 393.49 - Control valves for brakes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Control valves for brakes. 393.49 Section 393.49 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS PARTS AND...

  2. 46 CFR 98.25-60 - Safety relief valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Safety relief valves. 98.25-60 Section 98.25-60 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in...

  3. 46 CFR 61.05-20 - Boiler safety valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Boiler safety valves. 61.05-20 Section 61.05-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PERIODIC TESTS AND..., superheater, or reheater of a boiler shall be tested at the interval specified by table 61.05-10....

  4. 46 CFR 154.544 - Quick-closing shut-off valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Quick-closing shut-off valves. 154.544 Section 154.544... and Process Piping Systems § 154.544 Quick-closing shut-off valves. The quick-closing shut-off valve under §§ 154.530, 154.532 and 154.538 must: (a) Be a shut-off valve; (b) Close from the time...

  5. 46 CFR 153.368 - Pressure-vacuum valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Pressure-vacuum valves. 153.368 Section 153.368 Shipping... Systems § 153.368 Pressure-vacuum valves. (a) The pressure side of a required pressure-vacuum relief valve must begin to open only at a pressure exceeding 3.5 kPa gauge (approx. 0.5 psig). (b) A...

  6. 46 CFR 56.20-20 - Valve bypasses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Valves § 56.20-20 Valve bypasses. (a) Sizes of bypasses shall be in accordance with MSS SP-45 (incorporated by reference; see 46 CFR 56.01-2). (b) Pipe for bypasses should be at least Schedule 80 seamless... 46 Shipping 2 2011-10-01 2011-10-01 false Valve bypasses. 56.20-20 Section 56.20-20 Shipping...

  7. 46 CFR 153.371 - Minimum relief valve setting for refrigerated cargo tanks.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Minimum relief valve setting for refrigerated cargo tanks. 153.371 Section 153.371 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Cargo Venting Systems...

  8. 46 CFR 153.370 - Minimum relief valve setting for ambient temperature cargo tanks.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Minimum relief valve setting for ambient temperature cargo tanks. 153.370 Section 153.370 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Cargo...

  9. 46 CFR 58.16-15 - Valves and safety relief devices.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Valves and safety relief devices. 58.16-15 Section 58.16-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Liquefied Petroleum Gases for Cooking and Heating § 58.16-15...

  10. 46 CFR 53.05-5 - Discharge capacities and valve markings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Pressure Vessel Code (incorporated by reference; see 46 CFR 53.01-1). The discharge capacities must be... 46 Shipping 2 2011-10-01 2011-10-01 false Discharge capacities and valve markings. 53.05-5 Section 53.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING...

  11. 46 CFR 52.20-17 - Opening between boiler and safety valve (modifies PFT-44).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Opening between boiler and safety valve (modifies PFT-44). 52.20-17 Section 52.20-17 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Firetube Boilers § 52.20-17 Opening between boiler and safety...

  12. 49 CFR 179.100-19 - Tests of safety relief valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Tests of safety relief valves. 179.100-19 Section... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) §...

  13. 42 CFR 84.182 - Exhalation valve leakage test; minimum requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Exhalation valve leakage test; minimum requirements. 84.182 Section 84.182 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Non-Powered Air-Purifying...

  14. 42 CFR 84.177 - Inhalation and exhalation valves; minimum requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Inhalation and exhalation valves; minimum requirements. 84.177 Section 84.177 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Non-Powered Air-Purifying...

  15. 42 CFR 84.200 - Inhalation and exhalation valves; minimum requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Inhalation and exhalation valves; minimum requirements. 84.200 Section 84.200 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Chemical Cartridge Respirators §...

  16. 42 CFR 84.1137 - Inhalation and exhalation valves; minimum requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Inhalation and exhalation valves; minimum requirements. 84.1137 Section 84.1137 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Dust, Fume, and Mist; Pesticide;...

  17. 46 CFR 154.540 - Quick-closing shut-off valves: Emergency shut-down system.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Quick-closing shut-off valves: Emergency shut-down system. 154.540 Section 154.540 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Cargo and...

  18. 46 CFR 35.35-10 - Closing of freeing-ports, scuppers, and sea valves-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Closing of freeing-ports, scuppers, and sea valves-TB/ALL. 35.35-10 Section 35.35-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS OPERATIONS Cargo Handling § 35.35-10 Closing of freeing-ports, scuppers, and sea valves—TB/ALL. The person...

  19. 46 CFR 53.05-2 - Relief valve requirements for hot water boilers (modifies HG-400.2).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... (incorporated by reference; see 46 CFR 53.01-1) except as noted otherwise in this section. (b) Hot water heating... 46 Shipping 2 2011-10-01 2011-10-01 false Relief valve requirements for hot water boilers... (CONTINUED) MARINE ENGINEERING HEATING BOILERS Pressure Relieving Devices (Article 4) § 53.05-2 Relief...

  20. 46 CFR 53.05-1 - Safety valve requirements for steam boilers (modifies HG-400 and HG-401).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... the ASME Boiler and Pressure Vessel Code (incorporated by reference; see 46 CFR 53.01-1) except as... 46 Shipping 2 2011-10-01 2011-10-01 false Safety valve requirements for steam boilers (modifies HG... (CONTINUED) MARINE ENGINEERING HEATING BOILERS Pressure Relieving Devices (Article 4) § 53.05-1 Safety...

  1. 49 CFR Appendix A to Part 180 - Internal Self-closing Stop Valve Emergency Closure Test for Liquefied Compressed Gases

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Internal Self-closing Stop Valve Emergency Closure Test for Liquefied Compressed Gases A Appendix A to Part 180 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED)...

  2. 46 CFR 154.530 - Valves: Cargo tank MARVS 69 kPa gauge (10 psig) or lower.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Valves: Cargo tank MARVS 69 kPa gauge (10 psig) or lower..., Construction and Equipment Cargo and Process Piping Systems § 154.530 Valves: Cargo tank MARVS 69 kPa gauge (10... a MARVS of 69 kPa gauge (10 psig) or lower must have shut-off valves that— (1) Are located as...

  3. 49 CFR Appendix B to Part 180 - Acceptable Internal Self-closing Stop Valve Leakage Tests for Cargo Tanks Transporting Liquefied...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Acceptable Internal Self-closing Stop Valve Leakage Tests for Cargo Tanks Transporting Liquefied Compressed Gases B Appendix B to Part 180 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION...

  4. 46 CFR 154.532 - Valves: Cargo tank MARVS greater than 69 kPa gauge (10 psig).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Valves: Cargo tank MARVS greater than 69 kPa gauge (10... greater than 69 kPa gauge (10 psig). (a) Except connections for tank safety relief valves and except for... on a cargo tank with a MARVS greater than 69 kPa gauge (10 psig) must have, as close to the tank...

  5. 47 CFR 80.334 - False distress alerts.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false False distress alerts. 80.334 Section 80.334... § 80.334 False distress alerts. A distress alert is false if it was transmitted without any indication... distress alert is prohibited and may be subject to the provisions of part 1, subpart A of this chapter...

  6. 47 CFR 80.1114 - False distress alerts.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false False distress alerts. 80.1114 Section 80.1114... Safety Communications § 80.1114 False distress alerts. The provisions of §§ 80.334 and 80.335 apply to false distress alerts....

  7. 42 CFR 21.23 - False statements as disqualification.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false False statements as disqualification. 21.23 Section... COMMISSIONED OFFICERS Appointment § 21.23 False statements as disqualification. Willfully false statements shall be cause for rejection of the application or, as provided in subpart N of this part, for dismissal....

  8. 42 CFR 1001.901 - False or improper claims.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false False or improper claims. 1001.901 Section 1001.901 Public Health OFFICE OF INSPECTOR GENERAL-HEALTH CARE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OIG AUTHORITIES PROGRAM INTEGRITY-MEDICARE AND STATE HEALTH CARE PROGRAMS Permissive Exclusions § 1001.901...

  9. Left ventricular outflow tract false aneurysm late after aortic valve replacement.

    PubMed

    Bizzarri, Federico; Braconi, Lucio; Rossi, Alessandra; Sorbara, Carlo; Stefano, Pier Luigi

    2005-01-01

    We describe an unusual case of left ventricular outflow tract (LVOT) pseudoaneurysm late after aortic valve replacement. A 77-year-old man, who had undergone aortic valve replacement with mechanical prosthesis 7 years ago, presented, asymptomatic, with a transesophageal echocardiography (TTE) diagnosis of a large cavitary mass arising behind the aortic wall. The orifice of the pseudoaneurysm was successfully surgically closed and the aortic root reconstructed with cryopreserved homograft. PMID:15870043

  10. 45 CFR 3.4 - False reports and reports of injury or damage.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 1 2011-10-01 2011-10-01 false False reports and reports of injury or damage. 3.4 Section 3.4 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CONDUCT OF PERSONS AND TRAFFIC ON THE NATIONAL INSTITUTES OF HEALTH FEDERAL ENCLAVE General § 3.4 False reports...

  11. 47 CFR 80.335 - Procedures for canceling false distress alerts.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Procedures for canceling false distress alerts..., Alarm, Urgency and Safety Procedures § 80.335 Procedures for canceling false distress alerts. If a distress alert is inadvertently transmitted, the following steps shall be taken to cancel the...

  12. 47 CFR 11.45 - Prohibition of false or deceptive EAS transmissions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Prohibition of false or deceptive EAS transmissions. 11.45 Section 11.45 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL EMERGENCY ALERT SYSTEM (EAS) Organization § 11.45 Prohibition of false or deceptive EAS transmissions. No person...

  13. 43 CFR 20.510 - Fraud or false statements in a Government matter.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false Fraud or false statements in a Government matter. 20.510 Section 20.510 Public Lands: Interior Office of the Secretary of the Interior EMPLOYEE RESPONSIBILITIES AND CONDUCT Other Employee Conduct Provisions § 20.510 Fraud or false statements in a...

  14. 45 CFR 1182.18 - Penalties for obtaining an Institute record under false pretenses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 3 2011-10-01 2011-10-01 false Penalties for obtaining an Institute record under false pretenses. 1182.18 Section 1182.18 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES INSTITUTE OF MUSEUM AND LIBRARY...

  15. Valve

    DOEpatents

    Cho, Nakwon

    1980-01-01

    A positive acting valve suitable for operation in a corrosive environment is provided. The valve includes a hollow valve body defining an open-ended bore for receiving two, axially aligned, spaced-apart, cylindrical inserts. One insert, designated the seat insert, terminates inside the valve body in an annular face which lies within plane normal to the axis of the two inserts. An elastomeric O-ring seal is disposed in a groove extending about the annular face. The other insert, designated the wedge insert, terminates inside the valve body in at least two surfaces oppositely inclined with respect to each other and with respect to a plane normal to the axis of the two inserts. An elongated reciprocable gate, movable between the two inserts along a path normal to the axis of the two inserts, has a first flat face portion disposed adjacent and parallel to the annular face of the seat insert. The gate has a second face portion opposite to the first face portion provided with at least two oppositely inclined surfaces for mating with respective inclined surfaces of the wedge insert. An opening is provided through the gate which registers with a flow passage through the two inserts when the valve is open. Interaction of the respective inclined surfaces of the gate and wedge insert act to force the first flat face portion of the gate against the O-ring seal in the seat insert at the limits of gate displacement where it reaches its respective fully open and fully closed positions.

  16. 49 CFR 236.383 - Valve locks, valves, and valve magnets.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Valve locks, valves, and valve magnets. 236.383... Inspection and Tests § 236.383 Valve locks, valves, and valve magnets. Valve locks on valves of the non-cut-off type shall be tested at least once every three months, and valves and valve magnets shall...

  17. 49 CFR 236.383 - Valve locks, valves, and valve magnets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Valve locks, valves, and valve magnets. 236.383... Inspection and Tests § 236.383 Valve locks, valves, and valve magnets. Valve locks on valves of the non-cut-off type shall be tested at least once every three months, and valves and valve magnets shall...

  18. 49 CFR 236.383 - Valve locks, valves, and valve magnets.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Valve locks, valves, and valve magnets. 236.383... Inspection and Tests § 236.383 Valve locks, valves, and valve magnets. Valve locks on valves of the non-cut-off type shall be tested at least once every three months, and valves and valve magnets shall...

  19. 49 CFR 236.383 - Valve locks, valves, and valve magnets.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Valve locks, valves, and valve magnets. 236.383... Inspection and Tests § 236.383 Valve locks, valves, and valve magnets. Valve locks on valves of the non-cut-off type shall be tested at least once every three months, and valves and valve magnets shall...

  20. 43 CFR 20.510 - Fraud or false statements in a Government matter.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Fraud or false statements in a Government matter. 20.510 Section 20.510 Public Lands: Interior Office of the Secretary of the Interior EMPLOYEE RESPONSIBILITIES AND CONDUCT Other Employee Conduct Provisions § 20.510 Fraud or false statements in a...

  1. Standing valve

    SciTech Connect

    Coleman, S.B.

    1990-08-28

    This patent discusses an apparatus for removing fluids from a wellbore. It comprises a valve housing fixedly secured to a wellbore tubing string, the housing having perforations and a valve seating surface; a valve stem alignment guide secured to the valve housing; a valve stem adapted for movement in the valve stem alignment guide; and a valve seating device attached to the valve stem and capable of contacting the valve seating surface, thereby preventing fluid flow through the valve housing and past the valve seating surface when the seating device and valve seating surface are in contact.

  2. Safety valve

    DOEpatents

    Bergman, Ulf C.

    1984-01-01

    The safety valve contains a resilient gland to be held between a valve seat and a valve member and is secured to the valve member by a sleeve surrounding the end of the valve member adjacent to the valve seat. The sleeve is movable relative to the valve member through a limited axial distance and a gap exists between said valve member and said sleeve.

  3. 42 CFR 84.137 - Inhalation and exhalation valves; check valves; minimum requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Inhalation and exhalation valves; check valves... PROTECTIVE DEVICES Supplied-Air Respirators § 84.137 Inhalation and exhalation valves; check valves; minimum requirements. (a) Inhalation and exhalation valves shall be provided where necessary and protected...

  4. 42 CFR 84.137 - Inhalation and exhalation valves; check valves; minimum requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Inhalation and exhalation valves; check valves... PROTECTIVE DEVICES Supplied-Air Respirators § 84.137 Inhalation and exhalation valves; check valves; minimum requirements. (a) Inhalation and exhalation valves shall be provided where necessary and protected...

  5. 42 CFR 84.158 - Exhalation valve leakage test.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Exhalation valve leakage test. 84.158 Section 84... Respirators § 84.158 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be... between the valve and valve seat shall not exceed 30 milliliters per minute....

  6. 42 CFR 84.158 - Exhalation valve leakage test.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Exhalation valve leakage test. 84.158 Section 84... Respirators § 84.158 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be... between the valve and valve seat shall not exceed 30 milliliters per minute....

  7. 42 CFR 84.92 - Exhalation valve leakage test.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Exhalation valve leakage test. 84.92 Section 84.92... Breathing Apparatus § 84.92 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be...) Leakage between the valve and the valve seat shall not exceed 30 milliliters per minute....

  8. 42 CFR 84.92 - Exhalation valve leakage test.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Exhalation valve leakage test. 84.92 Section 84.92... Breathing Apparatus § 84.92 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be...) Leakage between the valve and the valve seat shall not exceed 30 milliliters per minute....

  9. 42 CFR 84.92 - Exhalation valve leakage test.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Exhalation valve leakage test. 84.92 Section 84.92... Breathing Apparatus § 84.92 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be...) Leakage between the valve and the valve seat shall not exceed 30 milliliters per minute....

  10. 42 CFR 84.92 - Exhalation valve leakage test.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Exhalation valve leakage test. 84.92 Section 84.92... Breathing Apparatus § 84.92 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be...) Leakage between the valve and the valve seat shall not exceed 30 milliliters per minute....

  11. 42 CFR 84.158 - Exhalation valve leakage test.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Exhalation valve leakage test. 84.158 Section 84... Respirators § 84.158 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be... between the valve and valve seat shall not exceed 30 milliliters per minute....

  12. 46 CFR 154.452 - External pressure.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false External pressure. 154.452 Section 154.452 Shipping... Independent Tank Type C and Process Pressure Vessels § 154.452 External pressure. The design external pressure...) for tanks without a vacuum relief valve. P2=0, or the pressure relief valve setting for an...

  13. 46 CFR 76.25-30 - Piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Piping. 76.25-30 Section 76.25-30 Shipping COAST GUARD... System, Details § 76.25-30 Piping. (a) All piping, valves, and fittings of ferrous materials shall be... piping, valves, fittings, and sprinkler heads shall be securely supported, and, where...

  14. 46 CFR 76.17-10 - Controls.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Controls. 76.17-10 Section 76.17-10 Shipping COAST GUARD... Systems, Details § 76.17-10 Controls. (a) The foam agent, its container, and all controls and valves for... controls and valves for the operation of the system shall be outside the space protected and shall not...

  15. 49 CFR 179.201-8 - Sampling device and thermometer well.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Sampling device and thermometer well. 179.201-8... device and thermometer well. (a) Sampling valve and thermometer well are not specification requirements... be equipped with excess flow valves of an approved design. Interior pipe of thermometer well must...

  16. 14 CFR 125.137 - Oil valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Oil valves. 125.137 Section 125.137....137 Oil valves. (a) Each oil valve must— (1) Comply with § 125.155; (2) Have positive stops or... the valve. (b) The closing of an oil shutoff means must not prevent feathering the propeller,...

  17. 14 CFR 125.137 - Oil valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Oil valves. 125.137 Section 125.137....137 Oil valves. (a) Each oil valve must— (1) Comply with § 125.155; (2) Have positive stops or... the valve. (b) The closing of an oil shutoff means must not prevent feathering the propeller,...

  18. 14 CFR 125.137 - Oil valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Oil valves. 125.137 Section 125.137....137 Oil valves. (a) Each oil valve must— (1) Comply with § 125.155; (2) Have positive stops or... the valve. (b) The closing of an oil shutoff means must not prevent feathering the propeller,...

  19. 14 CFR 125.137 - Oil valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Oil valves. 125.137 Section 125.137....137 Oil valves. (a) Each oil valve must— (1) Comply with § 125.155; (2) Have positive stops or... the valve. (b) The closing of an oil shutoff means must not prevent feathering the propeller,...

  20. 14 CFR 125.137 - Oil valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Oil valves. 125.137 Section 125.137....137 Oil valves. (a) Each oil valve must— (1) Comply with § 125.155; (2) Have positive stops or... the valve. (b) The closing of an oil shutoff means must not prevent feathering the propeller,...

  1. 21 CFR 868.5870 - Nonrebreathing valve.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Nonrebreathing valve. 868.5870 Section 868.5870...) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5870 Nonrebreathing valve. (a) Identification. A nonrebreathing valve is a one-way valve that directs breathing gas flow to the patient...

  2. 49 CFR 195.116 - Valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Valves. 195.116 Section 195.116 Transportation... PIPELINE Design Requirements § 195.116 Valves. Each valve installed in a pipeline system must comply with the following: (a) The valve must be of a sound engineering design. (b) Materials subject to...

  3. 21 CFR 868.5870 - Nonrebreathing valve.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Nonrebreathing valve. 868.5870 Section 868.5870...) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5870 Nonrebreathing valve. (a) Identification. A nonrebreathing valve is a one-way valve that directs breathing gas flow to the patient...

  4. 21 CFR 868.5870 - Nonrebreathing valve.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Nonrebreathing valve. 868.5870 Section 868.5870...) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5870 Nonrebreathing valve. (a) Identification. A nonrebreathing valve is a one-way valve that directs breathing gas flow to the patient...

  5. 49 CFR 195.116 - Valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Valves. 195.116 Section 195.116 Transportation... PIPELINE Design Requirements § 195.116 Valves. Each valve installed in a pipeline system must comply with the following: (a) The valve must be of a sound engineering design. (b) Materials subject to...

  6. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Valve maintenance. 195.420 Section 195.420... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each valve..., inspect each mainline valve to determine that it is functioning properly. (c) Each operator shall...

  7. 49 CFR 195.116 - Valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Valves. 195.116 Section 195.116 Transportation... PIPELINE Design Requirements § 195.116 Valves. Each valve installed in a pipeline system must comply with the following: (a) The valve must be of a sound engineering design. (b) Materials subject to...

  8. 21 CFR 868.5870 - Nonrebreathing valve.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Nonrebreathing valve. 868.5870 Section 868.5870...) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5870 Nonrebreathing valve. (a) Identification. A nonrebreathing valve is a one-way valve that directs breathing gas flow to the patient...

  9. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Valve maintenance. 195.420 Section 195.420... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each valve..., inspect each mainline valve to determine that it is functioning properly. (c) Each operator shall...

  10. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Valve maintenance. 195.420 Section 195.420... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each valve..., inspect each mainline valve to determine that it is functioning properly. (c) Each operator shall...

  11. 21 CFR 868.5870 - Nonrebreathing valve.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Nonrebreathing valve. 868.5870 Section 868.5870...) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5870 Nonrebreathing valve. (a) Identification. A nonrebreathing valve is a one-way valve that directs breathing gas flow to the patient...

  12. 49 CFR 195.116 - Valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Valves. 195.116 Section 195.116 Transportation... PIPELINE Design Requirements § 195.116 Valves. Each valve installed in a pipeline system must comply with the following: (a) The valve must be of a sound engineering design. (b) Materials subject to...

  13. Plug valve

    DOEpatents

    Wordin, John J.

    1989-01-01

    An improved plug valve wherein a novel shape for the valve plug and valve chamber provide mating surfaces for improved wear characteristics. The novel shape of the valve plug is a frustum of a body of revolution of a curved known as a tractrix, a solid shape otherwise known as a peudosphere.

  14. Check valve

    SciTech Connect

    Upton, H.A.; Garcia, P.

    1999-08-24

    A check valve for use in a GDCS of a nuclear reactor and having a motor driven disk including a rotatable armature for rotating the check valve disk over its entire range of motion is described. In one embodiment, the check valve includes a valve body having a coolant flow channel extending therethrough. The coolant flow channel includes an inlet end and an outlet end. A valve body seat is located on an inner surface of the valve body. The check valve further includes a disk assembly, sometimes referred to as the motor driven disc, having a counterweight and a disk shaped valve. The disk valve includes a disk base having a seat for seating with the valve body seat. The disk assembly further includes a first hinge pin member which extends at least partially through the disk assembly and is engaged to the disk. The disk valve is rotatable relative to the first hinge pin member. The check valve also includes a motor having a stator frame with a stator bore therein. An armature is rotatably positioned within the stator bore and the armature is coupled to the disk valve to cause the disk valve to rotate about its full range of motion. 5 figs.

  15. Check valve

    DOEpatents

    Upton, Hubert Allen; Garcia, Pablo

    1999-08-24

    A check valve for use in a GDCS of a nuclear reactor and having a motor driven disk including a rotatable armature for rotating the check valve disk over its entire range of motion is described. In one embodiment, the check valve includes a valve body having a coolant flow channel extending therethrough. The coolant flow channel includes an inlet end and an outlet end. A valve body seat is located on an inner surface of the valve body. The check valve further includes a disk assembly, sometimes referred to as the motor driven disc, having a counterweight and a disk shaped valve. The disk valve includes a disk base having a seat for seating with the valve body seat. The disk assembly further includes a first hinge pin member which extends at least partially through the disk assembly and is engaged to the disk. The disk valve is rotatable relative to the first hinge pin member. The check valve also includes a motor having a stator frame with a stator bore therein. An armature is rotatably positioned within the stator bore and the armature is coupled to the disk valve to cause the disk valve to rotate about its full range of motion.

  16. 49 CFR 179.500-11 - Loading and unloading valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Loading and unloading valves. 179.500-11 Section...-113 and 107A) § 179.500-11 Loading and unloading valves. (a) Loading and unloading valve or valves shall be mounted on the cover or threaded into the marked end of tank. These valves shall be of...

  17. 49 CFR 179.500-11 - Loading and unloading valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Loading and unloading valves. 179.500-11 Section... 107A) § 179.500-11 Loading and unloading valves. (a) Loading and unloading valve or valves shall be mounted on the cover or threaded into the marked end of tank. These valves shall be of approved type,...

  18. 46 CFR 95.15-50 - Lockout valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Lockout valves. 95.15-50 Section 95.15-50 Shipping COAST... EQUIPMENT Carbon Dioxide Extinguishing Systems, Details § 95.15-50 Lockout valves. (a) A lockout valve must... lockout valve must be a manually operated valve located in the discharge manifold prior to the stop...

  19. 49 CFR 179.500-11 - Loading and unloading valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Loading and unloading valves. 179.500-11 Section... 107A) § 179.500-11 Loading and unloading valves. (a) Loading and unloading valve or valves shall be mounted on the cover or threaded into the marked end of tank. These valves shall be of approved type,...

  20. 49 CFR 179.500-11 - Loading and unloading valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Loading and unloading valves. 179.500-11 Section... 107A) § 179.500-11 Loading and unloading valves. (a) Loading and unloading valve or valves shall be mounted on the cover or threaded into the marked end of tank. These valves shall be of approved type,...

  1. 46 CFR 95.15-50 - Lockout valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Lockout valves. 95.15-50 Section 95.15-50 Shipping COAST... EQUIPMENT Carbon Dioxide Extinguishing Systems, Details § 95.15-50 Lockout valves. (a) A lockout valve must... lockout valve must be a manually operated valve located in the discharge manifold prior to the stop...

  2. False assumptions.

    PubMed

    Swaminathan, M

    1997-01-01

    Indian women do not have to be told the benefits of breast feeding or "rescued from the clutches of wicked multinational companies" by international agencies. There is no proof that breast feeding has declined in India; in fact, a 1987 survey revealed that 98% of Indian women breast feed. Efforts to promote breast feeding among the middle classes rely on such initiatives as the "baby friendly" hospital where breast feeding is promoted immediately after birth. This ignores the 76% of Indian women who give birth at home. Blaming this unproved decline in breast feeding on multinational companies distracts attention from more far-reaching and intractable effects of social change. While the Infant Milk Substitutes Act is helpful, it also deflects attention from more pressing issues. Another false assumption is that Indian women are abandoning breast feeding to comply with the demands of employment, but research indicates that most women give up employment for breast feeding, despite the economic cost to their families. Women also seek work in the informal sector to secure the flexibility to meet their child care responsibilities. Instead of being concerned about "teaching" women what they already know about the benefits of breast feeding, efforts should be made to remove the constraints women face as a result of their multiple roles and to empower them with the support of families, governmental policies and legislation, employers, health professionals, and the media. PMID:12321627

  3. Valve Disease

    MedlinePlus

    ... the need for heart valve surgery. Percutaneous Interventions Balloon valvuloplasty is a procedure that may be used ... procedure works on valves in the same way balloon angioplasty does on the arteries. Like angioplasty, it ...

  4. Heart valve surgery

    MedlinePlus

    Valve replacement; Valve repair; Heart valve prosthesis; Mechanical valves, Prosthetic valves ... place. The main types of new valves are: Mechanical -- made of man-made materials, such as metal ( ...

  5. Fast valve

    DOEpatents

    Van Dyke, William J.

    1992-01-01

    A fast valve is disclosed that can close on the order of 7 milliseconds. It is closed by the force of a compressed air spring with the moving parts of the valve designed to be of very light weight and the valve gate being of wedge shaped with O-ring sealed faces to provide sealing contact without metal to metal contact. The combination of the O-ring seal and an air cushion create a soft final movement of the valve closure to prevent the fast air acting valve from having a harsh closing.

  6. Fast valve

    DOEpatents

    Van Dyke, W.J.

    1992-04-07

    A fast valve is disclosed that can close on the order of 7 milliseconds. It is closed by the force of a compressed air spring with the moving parts of the valve designed to be of very light weight and the valve gate being of wedge shaped with O-ring sealed faces to provide sealing contact without metal to metal contact. The combination of the O-ring seal and an air cushion create a soft final movement of the valve closure to prevent the fast air acting valve from having a harsh closing. 4 figs.

  7. Depressurization valve

    DOEpatents

    Skoda, G.I.

    1989-03-28

    A depressurization valve for use in relieving completely the pressure in a simplified boiling water reactor is disclosed. The normally closed and sealed valve is provided with a valve body defining a conduit from an outlet of a manifold from the reactor through a valve seat. A closing valve disk is configured for fitting to the valve seat to normally close the valve. The seat below the disk is provided with a radially extending annulus extending a short distance into the aperture defined by the seat. The disk is correspondingly provided with a longitudinally extending annulus that extends downwardly through the aperture defined by the seat towards the high pressure side of the valve body. A ring shaped membrane is endlessly welded to the seat annulus and to the disk annulus. The membrane is conformed over the confronted surface of the seat and disk in a C-sectioned configuration to seal the depressurization valve against the possibility of weeping. The disk is held to the closed position by an elongate stem extending away from the high pressure side of the valve body. The stem has a flange configured integrally to the stem for bias by two springs. The first spring acts from a portion of the housing overlying the disk on the stem flange adjacent the disk. This spring urges the stem and attached disk away from the seat and thus will cause the valve to open at any pressure. A second spring-preferably of the Belleville variety-acts on a latch plate surrounding and freely moving relative to the end of the stem. This second spring overcomes the bias of the first spring and any pressure acting upon the disk. This Belleville spring maintains through its spring force the valve in the closed position. At the same time, the latch plate with its freedom of movement relative to the stem allows the stem to thermally expand during valve temperature excursion.

  8. 46 CFR 194.10-30 - Magazine sprinklers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Magazine sprinklers. 194.10-30 Section 194.10-30..., USE, AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Magazines § 194.10-30 Magazine sprinklers... shall be installed in each magazine or magazine group. The control valve shall generally be...

  9. 46 CFR 105.20-5 - Piping systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Piping systems. 105.20-5 Section 105.20-5 Shipping COAST... VESSELS DISPENSING PETROLEUM PRODUCTS Specific Requirements-Cargo Tanks § 105.20-5 Piping systems. (a... systems. (b) Valves shall be of a suitable nonferrous metallic Union Bonnet type with ground seats...

  10. 46 CFR 194.20-17 - Compressed gases.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... chemical storeroom. (b) Flammable compressed gases and oxygen shall be stowed in accordance with 49 CFR part 176, subpart H. (c) Compressed gas cylinders shall have valve protection in accordance with 49 CFR... 46 Shipping 7 2011-10-01 2011-10-01 false Compressed gases. 194.20-17 Section 194.20-17...

  11. 46 CFR 162.018-3 - Materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Materials. 162.018-3 Section 162.018-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS... Materials. (a) The materials used in the manufacture of safety relief valves shall conform to the...

  12. 46 CFR 58.20-10 - Pressure relieving devices.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Pressure relieving devices. 58.20-10 Section 58.20-10... MACHINERY AND RELATED SYSTEMS Refrigeration Machinery § 58.20-10 Pressure relieving devices. (a) Each pressure vessel containing refrigerants, which may be isolated, shall be protected by a relief valve set...

  13. 46 CFR 56.50-20 - Pressure relief piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Pressure relief piping. 56.50-20 Section 56.50-20... APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-20 Pressure relief piping. (a) General... pressure-relieving safety devices shall be designed to facilitate drainage. (c) Stop valves. Stop...

  14. 49 CFR 229.111 - Water-flow indicator.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Water-flow indicator. 229.111 Section 229.111....111 Water-flow indicator. (a) Steam generators shall be equipped with an illuminated visual return water-flow indicator. (b) Steam generators shall be equipped with an operable test valve or other...

  15. 46 CFR 56.97-5 - Pressure testing of nonstandard piping system components.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Pressure testing of nonstandard piping system components... ENGINEERING PIPING SYSTEMS AND APPURTENANCES Pressure Tests § 56.97-5 Pressure testing of nonstandard piping system components. (a) All nonstandard piping system components such as welded valves and...

  16. 49 CFR 232.217 - Train brake tests conducted using yard air.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Train brake tests conducted using yard air. 232... Train brake tests conducted using yard air. (a) When a train air brake system is tested from a yard air... reduction of brake pipe air pressure at the same, or slower, rate as an engineer's brake valve. (b) The...

  17. 46 CFR 162.018-5 - Blow-down adjustment and popping tolerance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Blow-down adjustment and popping tolerance. 162.018-5... Compressed Gas § 162.018-5 Blow-down adjustment and popping tolerance. (a) Safety relief valves shall be so... adjustible blow-down construction shall be adjusted to close after blowing down not more than 5 percent...

  18. 46 CFR 32.70-20 - Pump-engine compartment-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Pump-engine compartment-TB/ALL. 32.70-20 Section 32.70..., 1936 § 32.70-20 Pump-engine compartment—TB/ALL. No cofferdam will be required between a cargo tank and... pumping operations, provided the pumping engine compartment contains no cargo valves and is...

  19. 46 CFR 64.47 - Type of relief devices.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... rupture disc or a spring loaded relief valve. ... 46 Shipping 2 2011-10-01 2011-10-01 false Type of relief devices. 64.47 Section 64.47 Shipping... CARGO HANDLING SYSTEMS Standards for an MPT § 64.47 Type of relief devices. (a) An MPT with an...

  20. 49 CFR 192.199 - Requirements for design of pressure relief and limiting devices.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... pressure relief valve or pressure limiting device inoperative. ... 49 Transportation 3 2011-10-01 2011-10-01 false Requirements for design of pressure relief and... Design of Pipeline Components § 192.199 Requirements for design of pressure relief and limiting...

  1. 49 CFR 236.729 - Cock, double heading.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Cock, double heading. 236.729 Section 236.729 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Cock, double heading. A manually operated valve by means of which the control of brake operation...

  2. 46 CFR 132.110 - Piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Piping. 132.110 Section 132.110 Shipping COAST GUARD....110 Piping. (a) Except as provided for liftboats by § 134.180 of this subchapter, each fitting, flange, valve, and run of piping must meet the applicable requirements of part 128 of this subchapter....

  3. 46 CFR 153.910 - Cargo piping plan.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Cargo piping plan. 153.910 Section 153.910 Shipping... Information § 153.910 Cargo piping plan. No person may operate a tankship unless the tankship has a cargo piping plan that: (a) Shows all cargo piping on the tankship; (b) Shows all cargo valving, pumps,...

  4. 46 CFR 108.475 - Piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Piping. 108.475 Section 108.475 Shipping COAST GUARD... Extinguishing Systems Foam Extinguishing Systems § 108.475 Piping. (a) Each pipe, valve, and fitting in a foam... to remove liquid from the system. (e) Piping in a foam extinguishing system must be used only...

  5. 46 CFR 193.10-15 - Piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Piping. 193.10-15 Section 193.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 193.10-15 Piping. (a) All piping, valves, and fittings, shall meet...

  6. 46 CFR 116.970 - Protection against hot piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Protection against hot piping. 116.970 Section 116.970 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE... ARRANGEMENT Rails and Guards § 116.970 Protection against hot piping. Piping, including valves, pipe...

  7. 46 CFR 34.25-10 - Controls-T/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Controls-T/ALL. 34.25-10 Section 34.25-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS FIREFIGHTING EQUIPMENT Water Spray Extinguishing Systems, Details § 34.25-10 Controls—T/ALL. (a) There shall be one control valve for the operation of...

  8. 46 CFR 95.15-15 - Piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Piping. 95.15-15 Section 95.15-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS FIRE PROTECTION EQUIPMENT Carbon Dioxide Extinguishing Systems, Details § 95.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not...

  9. 46 CFR 108.447 - Piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Piping. 108.447 Section 108.447 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire Extinguishing Systems Fixed Carbon Dioxide Fire Extinguishing Systems § 108.447 Piping. (a) Each pipe, valve, and fitting in a CO2 system must have...

  10. 46 CFR 64.79 - Inspection of pressure and vacuum relief device.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Inspection of pressure and vacuum relief device. 64.79... pressure and vacuum relief device. (a) The inspection of the pressure and vacuum relief device required in... of the accuracy of the pressure setting. (b) If the pressure and vacuum relief valve passes...

  11. 46 CFR 109.421 - Report of repairs to boilers and pressure vessels.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Report of repairs to boilers and pressure vessels. 109... Report of repairs to boilers and pressure vessels. Before making repairs, except normal repairs and maintenance such as replacement of valves or pressure seals, to boilers or unfired pressure vessels...

  12. 46 CFR 38.10-10 - Cargo piping-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Cargo piping-TB/ALL. 38.10-10 Section 38.10-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS LIQUEFIED FLAMMABLE GASES Piping, Valves, Fittings, and Accessory Equipment § 38.10-10 Cargo piping—TB/ALL. (a) The piping shall be designed for...

  13. 46 CFR 105.20-10 - Pumps.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Pumps. 105.20-10 Section 105.20-10 Shipping COAST GUARD... DISPENSING PETROLEUM PRODUCTS Specific Requirements-Cargo Tanks § 105.20-10 Pumps. (a) Pumps for cargo... discharge side of pump if the pressure under shutoff conditions exceeds 60 pounds. When a relief valve...

  14. 46 CFR 95.17-10 - Controls.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Controls. 95.17-10 Section 95.17-10 Shipping COAST GUARD... Extinguishing Systems, Details § 95.17-10 Controls. (a) The foam agent, its container, and all controls and... controls and valves for the operation of the system shall be outside the space protected and shall not...

  15. 46 CFR 108.473 - Foam system components.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Foam system components. 108.473 Section 108.473 Shipping... EQUIPMENT Fire Extinguishing Systems Foam Extinguishing Systems § 108.473 Foam system components. (a) Each foam agent, each tank for a foam agent, each discharge outlet, each control, and each valve for...

  16. 46 CFR 56.50-40 - Blowoff piping (replaces 122.1.4).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 CFR 56.01-2). (2) Where blowoff valves are connected to a common discharge from two or more... saturated steam at the maximum allowable working pressure of the boiler. (c) Boiler blowoff piping which... 46 Shipping 2 2011-10-01 2011-10-01 false Blowoff piping (replaces 122.1.4). 56.50-40 Section...

  17. 49 CFR 173.336 - Nitrogen dioxide, liquefied, or dinitrogen tetroxide, liquefied.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Nitrogen dioxide, liquefied, or dinitrogen....336 Nitrogen dioxide, liquefied, or dinitrogen tetroxide, liquefied. (a) Nitrogen dioxide, liquefied... with nitrogen dioxide. Each valve opening must be closed by a solid metal plug with tapered...

  18. 46 CFR 78.47-17 - Fire extinguishing system controls.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Markings for Fire and Emergency Equipment, Etc. § 78.47-17 Fire extinguishing system controls. (a) The control cabinets or spaces containing valves or manifolds for the various fire extinguishing systems shall... 46 Shipping 3 2011-10-01 2011-10-01 false Fire extinguishing system controls. 78.47-17 Section...

  19. 46 CFR 108.631 - Fixed fire extinguishing system controls.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... DRILLING UNITS DESIGN AND EQUIPMENT Equipment Markings and Instructions § 108.631 Fixed fire extinguishing system controls. (a) Each cabinet or space that contains a valve, control, or manifold of a fixed fire... 46 Shipping 4 2011-10-01 2011-10-01 false Fixed fire extinguishing system controls....

  20. 46 CFR 196.37-13 - Fire extinguishing system controls.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... VESSELS OPERATIONS Markings for Fire and Emergency Equipment, etc. § 196.37-13 Fire extinguishing system controls. (a) The control cabinets or spaces containing valves or manifolds for the various fire... 46 Shipping 7 2011-10-01 2011-10-01 false Fire extinguishing system controls. 196.37-13...

  1. 46 CFR 131.825 - Controls of fire-extinguishing system.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... OPERATIONS Markings for Fire Equipment and Emergency Equipment § 131.825 Controls of fire-extinguishing system. Each control cabinet or space containing a valve or manifold for a fire extinguishing system must... 46 Shipping 4 2011-10-01 2011-10-01 false Controls of fire-extinguishing system. 131.825...

  2. 46 CFR 169.734 - Fire extinguishing system controls.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.734 Fire extinguishing system controls. Each control cabinet or space containing valves or manifolds for the various fire extinguishing... 46 Shipping 7 2011-10-01 2011-10-01 false Fire extinguishing system controls. 169.734 Section...

  3. 46 CFR 97.37-13 - Fire extinguishing system controls.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... VESSELS OPERATIONS Markings for Fire and Emergency Equipment, Etc. § 97.37-13 Fire extinguishing system controls. (a) The control cabinets or spaces containing valves or manifolds for the various fire... 46 Shipping 4 2011-10-01 2011-10-01 false Fire extinguishing system controls. 97.37-13 Section...

  4. 46 CFR 169.733 - Fire extinguishing branch lines.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.733 Fire extinguishing branch lines. Each branch line valve of every fire extinguishing system must be plainly and permanently marked... 46 Shipping 7 2011-10-01 2011-10-01 false Fire extinguishing branch lines. 169.733 Section...

  5. 49 CFR 236.739 - Device, acknowledging.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Device, acknowledging. 236.739 Section 236.739..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.739 Device, acknowledging. A manually operated electric switch or pneumatic valve by means of which, on...

  6. 49 CFR 236.712 - Brake pipe.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Brake pipe. 236.712 Section 236.712 Transportation... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.712 Brake pipe. A pipe running from the engineman's brake valve through the train, used for the transmission of air...

  7. 46 CFR 90.20-1 - Marine engineering details.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Marine engineering details. 90.20-1 Section 90.20-1... PROVISIONS General Marine Engineering Requirements § 90.20-1 Marine engineering details. (a) All marine engineering details such as piping, valves, fittings, boilers, pressure vessels, etc., and their...

  8. 14 CFR 125.133 - Fuel valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Fuel valves. 125.133 Section 125.133 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS....133 Fuel valves. Each fuel valve must— (a) Comply with § 125.155; (b) Have positive stops or...

  9. 14 CFR 25.995 - Fuel valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Fuel valves. 25.995 Section 25.995... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System Components § 25.995 Fuel valves. In addition to the requirements of § 25.1189 for shutoff means, each fuel valve must— (a) (b) Be supported...

  10. 14 CFR 125.133 - Fuel valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Fuel valves. 125.133 Section 125.133 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS....133 Fuel valves. Each fuel valve must— (a) Comply with § 125.155; (b) Have positive stops or...

  11. 14 CFR 25.995 - Fuel valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Fuel valves. 25.995 Section 25.995... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System Components § 25.995 Fuel valves. In addition to the requirements of § 25.1189 for shutoff means, each fuel valve must— (a) (b) Be supported...

  12. 14 CFR 25.995 - Fuel valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Fuel valves. 25.995 Section 25.995... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System Components § 25.995 Fuel valves. In addition to the requirements of § 25.1189 for shutoff means, each fuel valve must— (a) (b) Be supported...

  13. 14 CFR 29.995 - Fuel valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel valves. 29.995 Section 29.995... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System Components § 29.995 Fuel valves. In addition to meeting the requirements of § 29.1189, each fuel valve must— (a) (b) Be supported so that no...

  14. 14 CFR 125.133 - Fuel valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Fuel valves. 125.133 Section 125.133 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS....133 Fuel valves. Each fuel valve must— (a) Comply with § 125.155; (b) Have positive stops or...

  15. 14 CFR 27.995 - Fuel valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Fuel valves. 27.995 Section 27.995... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System Components § 27.995 Fuel valves. (a) There must be a positive, quick-acting valve to shut off fuel to each engine individually. (b) The control...

  16. 14 CFR 29.995 - Fuel valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Fuel valves. 29.995 Section 29.995... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System Components § 29.995 Fuel valves. In addition to meeting the requirements of § 29.1189, each fuel valve must— (a) (b) Be supported so that no...

  17. 14 CFR 27.995 - Fuel valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Fuel valves. 27.995 Section 27.995... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System Components § 27.995 Fuel valves. (a) There must be a positive, quick-acting valve to shut off fuel to each engine individually. (b) The control...

  18. 14 CFR 125.133 - Fuel valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Fuel valves. 125.133 Section 125.133 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS....133 Fuel valves. Each fuel valve must— (a) Comply with § 125.155; (b) Have positive stops or...

  19. 14 CFR 27.995 - Fuel valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Fuel valves. 27.995 Section 27.995... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System Components § 27.995 Fuel valves. (a) There must be a positive, quick-acting valve to shut off fuel to each engine individually. (b) The control...

  20. 14 CFR 29.995 - Fuel valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Fuel valves. 29.995 Section 29.995... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System Components § 29.995 Fuel valves. In addition to meeting the requirements of § 29.1189, each fuel valve must— (a) (b) Be supported so that no...

  1. 14 CFR 27.995 - Fuel valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Fuel valves. 27.995 Section 27.995... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System Components § 27.995 Fuel valves. (a) There must be a positive, quick-acting valve to shut off fuel to each engine individually. (b) The control...

  2. 14 CFR 25.995 - Fuel valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Fuel valves. 25.995 Section 25.995... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System Components § 25.995 Fuel valves. In addition to the requirements of § 25.1189 for shutoff means, each fuel valve must— (a) (b) Be supported...

  3. 14 CFR 25.995 - Fuel valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel valves. 25.995 Section 25.995... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System Components § 25.995 Fuel valves. In addition to the requirements of § 25.1189 for shutoff means, each fuel valve must— (a) (b) Be supported...

  4. 14 CFR 29.995 - Fuel valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Fuel valves. 29.995 Section 29.995... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System Components § 29.995 Fuel valves. In addition to meeting the requirements of § 29.1189, each fuel valve must— (a) (b) Be supported so that no...

  5. 14 CFR 27.995 - Fuel valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel valves. 27.995 Section 27.995... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System Components § 27.995 Fuel valves. (a) There must be a positive, quick-acting valve to shut off fuel to each engine individually. (b) The control...

  6. 14 CFR 29.995 - Fuel valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Fuel valves. 29.995 Section 29.995... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System Components § 29.995 Fuel valves. In addition to meeting the requirements of § 29.1189, each fuel valve must— (a) (b) Be supported so that no...

  7. 14 CFR 125.133 - Fuel valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Fuel valves. 125.133 Section 125.133 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS....133 Fuel valves. Each fuel valve must— (a) Comply with § 125.155; (b) Have positive stops or...

  8. 49 CFR 229.109 - Safety valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Safety valves. 229.109 Section 229.109..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Steam Generators § 229.109 Safety valves. Every steam generator shall be equipped with at least two safety valves that have...

  9. 46 CFR 108.444 - Lockout valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Lockout valves. 108.444 Section 108.444 Shipping COAST... Fire Extinguishing Systems Fixed Carbon Dioxide Fire Extinguishing Systems § 108.444 Lockout valves. (a) A lockout valve must be provided on any carbon dioxide extinguishing system protecting a space...

  10. 49 CFR 195.258 - Valves: General.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Valves: General. 195.258 Section 195.258... PIPELINE Construction § 195.258 Valves: General. (a) Each valve must be installed in a location that is accessible to authorized employees and that is protected from damage or tampering. (b) Each submerged...

  11. 49 CFR 195.258 - Valves: General.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Valves: General. 195.258 Section 195.258... PIPELINE Construction § 195.258 Valves: General. (a) Each valve must be installed in a location that is accessible to authorized employees and that is protected from damage or tampering. (b) Each submerged...

  12. 46 CFR 108.444 - Lockout valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Lockout valves. 108.444 Section 108.444 Shipping COAST... Fire Extinguishing Systems Fixed Carbon Dioxide Fire Extinguishing Systems § 108.444 Lockout valves. (a) A lockout valve must be provided on any carbon dioxide extinguishing system protecting a space...

  13. 49 CFR 195.258 - Valves: General.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Valves: General. 195.258 Section 195.258... PIPELINE Construction § 195.258 Valves: General. (a) Each valve must be installed in a location that is accessible to authorized employees and that is protected from damage or tampering. (b) Each submerged...

  14. 46 CFR 169.570 - Lockout valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Lockout valves. 169.570 Section 169.570 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Lifesaving and Firefighting Equipment Firefighting Equipment § 169.570 Lockout valves. (a) A lockout valve...

  15. 46 CFR 169.570 - Lockout valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Lockout valves. 169.570 Section 169.570 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Lifesaving and Firefighting Equipment Firefighting Equipment § 169.570 Lockout valves. (a) A lockout valve...

  16. 46 CFR 169.570 - Lockout valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Lockout valves. 169.570 Section 169.570 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Lifesaving and Firefighting Equipment Firefighting Equipment § 169.570 Lockout valves. (a) A lockout valve...

  17. 49 CFR 230.49 - Setting of safety relief valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Setting of safety relief valves. 230.49 Section... Appurtenances Safety Relief Valves § 230.49 Setting of safety relief valves. (a) Qualifications of individual who adjusts. Safety relief valves shall be set and adjusted by a competent person who is...

  18. 46 CFR 56.20-9 - Valve construction.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Valve construction. 56.20-9 Section 56.20-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Valves § 56.20-9 Valve construction. (a) Each valve must close with a right-hand...

  19. 46 CFR 56.20-9 - Valve construction.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Valve construction. 56.20-9 Section 56.20-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Valves § 56.20-9 Valve construction. (a) Each valve must close with a right-hand...

  20. 21 CFR 870.3935 - Prosthetic heart valve holder.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Prosthetic heart valve holder. 870.3935 Section... heart valve holder. (a) Identification. A prosthetic heart valve holder is a device used to hold a replacement heart valve while it is being sutured into place. (b) Classification. Class I. The device...

  1. 21 CFR 870.3935 - Prosthetic heart valve holder.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Prosthetic heart valve holder. 870.3935 Section... heart valve holder. (a) Identification. A prosthetic heart valve holder is a device used to hold a replacement heart valve while it is being sutured into place. (b) Classification. Class I. The device...

  2. 21 CFR 870.3935 - Prosthetic heart valve holder.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Prosthetic heart valve holder. 870.3935 Section... heart valve holder. (a) Identification. A prosthetic heart valve holder is a device used to hold a replacement heart valve while it is being sutured into place. (b) Classification. Class I. The device...

  3. 21 CFR 870.3935 - Prosthetic heart valve holder.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Prosthetic heart valve holder. 870.3935 Section... heart valve holder. (a) Identification. A prosthetic heart valve holder is a device used to hold a replacement heart valve while it is being sutured into place. (b) Classification. Class I. The device...

  4. 21 CFR 870.3935 - Prosthetic heart valve holder.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Prosthetic heart valve holder. 870.3935 Section... heart valve holder. (a) Identification. A prosthetic heart valve holder is a device used to hold a replacement heart valve while it is being sutured into place. (b) Classification. Class I. The device...

  5. 49 CFR 192.181 - Distribution line valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Distribution line valves. 192.181 Section 192.181... line valves. (a) Each high-pressure distribution system must have valves spaced so as to reduce the time to shut down a section of main in an emergency. The valve spacing is determined by the...

  6. 46 CFR 78.17-5 - Valves and closing appliances.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Valves and closing appliances. 78.17-5 Section 78.17-5..., Drills, and Inspections § 78.17-5 Valves and closing appliances. (a) It shall be the duty of the master to see that all valves, including cross connecting valves where fitted, and other appliances such...

  7. 46 CFR 105.25-20 - Shutoff valves required.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Shutoff valves required. 105.25-20 Section 105.25-20... Installed Below Decks § 105.25-20 Shutoff valves required. (a) Shutoff valves shall be provided in the suction lines as close to the tanks as possible. The valves shall be installed so as to shut off...

  8. 49 CFR 230.49 - Setting of safety relief valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Setting of safety relief valves. 230.49 Section... Appurtenances Safety Relief Valves § 230.49 Setting of safety relief valves. (a) Qualifications of individual who adjusts. Safety relief valves shall be set and adjusted by a competent person who is...

  9. 46 CFR 105.25-20 - Shutoff valves required.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Shutoff valves required. 105.25-20 Section 105.25-20... Installed Below Decks § 105.25-20 Shutoff valves required. (a) Shutoff valves shall be provided in the suction lines as close to the tanks as possible. The valves shall be installed so as to shut off...

  10. 46 CFR 154.519 - Piping relief valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Piping relief valves. 154.519 Section 154.519 Shipping... Process Piping Systems § 154.519 Piping relief valves. (a) The liquid relief valve that protects the cargo... cargo that is specially approved by the Commandant (CG-ENG). (b) A relief valve on a cargo pump...

  11. 46 CFR 154.519 - Piping relief valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Piping relief valves. 154.519 Section 154.519 Shipping... Process Piping Systems § 154.519 Piping relief valves. (a) The liquid relief valve that protects the cargo... cargo that is specially approved by the Commandant (CG-ENG). (b) A relief valve on a cargo pump...

  12. 46 CFR 154.519 - Piping relief valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Piping relief valves. 154.519 Section 154.519 Shipping... Process Piping Systems § 154.519 Piping relief valves. (a) The liquid relief valve that protects the cargo... cargo that is specially approved by the Commandant (CG-ENG). (b) A relief valve on a cargo pump...

  13. 46 CFR 105.25-20 - Shutoff valves required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Shutoff valves required. 105.25-20 Section 105.25-20... Installed Below Decks § 105.25-20 Shutoff valves required. (a) Shutoff valves shall be provided in the suction lines as close to the tanks as possible. The valves shall be installed so as to shut off...

  14. 46 CFR 154.1125 - Pipes, fittings, and valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Pipes, fittings, and valves. 154.1125 Section 154.1125... Firefighting § 154.1125 Pipes, fittings, and valves. (a) Each pipe, fitting, and valve for each water spray... listed in § 154.1110 must have at least one isolation valve at each branch connection and at least...

  15. 49 CFR 192.181 - Distribution line valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Distribution line valves. 192.181 Section 192.181... line valves. (a) Each high-pressure distribution system must have valves spaced so as to reduce the time to shut down a section of main in an emergency. The valve spacing is determined by the...

  16. 46 CFR 105.25-20 - Shutoff valves required.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Shutoff valves required. 105.25-20 Section 105.25-20... Installed Below Decks § 105.25-20 Shutoff valves required. (a) Shutoff valves shall be provided in the suction lines as close to the tanks as possible. The valves shall be installed so as to shut off...

  17. 46 CFR 154.1125 - Pipes, fittings, and valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Pipes, fittings, and valves. 154.1125 Section 154.1125... Firefighting § 154.1125 Pipes, fittings, and valves. (a) Each pipe, fitting, and valve for each water spray... listed in § 154.1110 must have at least one isolation valve at each branch connection and at least...

  18. 49 CFR 192.181 - Distribution line valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Distribution line valves. 192.181 Section 192.181... line valves. (a) Each high-pressure distribution system must have valves spaced so as to reduce the time to shut down a section of main in an emergency. The valve spacing is determined by the...

  19. 49 CFR 230.49 - Setting of safety relief valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Setting of safety relief valves. 230.49 Section... Appurtenances Safety Relief Valves § 230.49 Setting of safety relief valves. (a) Qualifications of individual who adjusts. Safety relief valves shall be set and adjusted by a competent person who is...

  20. 46 CFR 154.1125 - Pipes, fittings, and valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Pipes, fittings, and valves. 154.1125 Section 154.1125... Firefighting § 154.1125 Pipes, fittings, and valves. (a) Each pipe, fitting, and valve for each water spray... listed in § 154.1110 must have at least one isolation valve at each branch connection and at least...

  1. 46 CFR 56.20-15 - Valves employing resilient material.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Valves employing resilient material. 56.20-15 Section 56.20-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Valves § 56.20-15 Valves employing resilient material. (a) A valve in which the closure is accomplished by...

  2. 46 CFR 56.20-15 - Valves employing resilient material.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Valves employing resilient material. 56.20-15 Section 56.20-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Valves § 56.20-15 Valves employing resilient material. (a) A valve in which the closure is accomplished by...

  3. 42 CFR 84.158 - Exhalation valve leakage test.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Exhalation valve leakage test. 84.158 Section 84... Respirators § 84.158 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be subjected to a suction of 25 mm. water-column height while in a normal operating position. (b)...

  4. 42 CFR 84.123 - Exhalation valve leakage test.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Exhalation valve leakage test. 84.123 Section 84.123 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY....123 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be subjected to...

  5. 42 CFR 84.123 - Exhalation valve leakage test.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Exhalation valve leakage test. 84.123 Section 84.123 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY....123 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be subjected to...

  6. 42 CFR 84.123 - Exhalation valve leakage test.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Exhalation valve leakage test. 84.123 Section 84.123 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY....123 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be subjected to...

  7. 42 CFR 84.123 - Exhalation valve leakage test.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Exhalation valve leakage test. 84.123 Section 84.123 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY....123 Exhalation valve leakage test. (a) Dry exhalation valves and valve seats will be subjected to...

  8. Depressurization valve

    DOEpatents

    Skoda, George I.

    1989-01-01

    A depressurization valve for use in relieving completely the pressure in a simplified boiling water reactor is disclosed. The normally closed and sealed valve is provided with a valve body defining a conduit from an outlet of a manifold from the reactor through a valve seat. A closing valve disk is configured for fitting to the valve seat to normally close the valve. The seat below the disk is provided with a radially extending annulus extending a short distance into the aperture defined by the seat. The disk is correspondingly provided with a longitudinally extending annulus that extends downwardly through the aperture defined by the seat towards the high pressure side of the valve body. A ring shaped membrane is endlessly welded to the seat annulus and to the disk annulus. The membrane is conformed over the confronted surface of the seat and disk in a C-sectioned configuration to seal the depressurization valve against the possibility of weeping. The disk is held to the closed position by an elongate stem extending away from the high pressure side of the valve body. The stem has a flange configured integrally to the stem for bias by two springs. The first spring acts from a portion of the housing overlying the disk on the stem flange adjacent the disk. This spring urges the stem and attached disk away from the seat and thus will cause the valve to open at any pressure. A second spring--preferably of the Belleville variety--acts on a latch plate surrounding and freely moving relative to the end of the stem. This second spring overcomes the bias of the first spring and any pressure acting upon the disk. This Belleville spring maintains through its spring force the valve in the closed position. At the same time, the latch plate with its freedom of movement relative to the stem allows the stem to thermally expand during valve temperature excursion. The latch plate in surrounding the stem is limited in its outward movement by a boss attached to the stem at the end of

  9. Nuclear radiation actuated valve

    DOEpatents

    Christiansen, David W.; Schively, Dixon P.

    1985-01-01

    A nuclear radiation actuated valve for a nuclear reactor. The valve has a valve first part (such as a valve rod with piston) and a valve second part (such as a valve tube surrounding the valve rod, with the valve tube having side slots surrounding the piston). Both valve parts have known nuclear radiation swelling characteristics. The valve's first part is positioned to receive nuclear radiation from the nuclear reactor's fuel region. The valve's second part is positioned so that its nuclear radiation induced swelling is different from that of the valve's first part. The valve's second part also is positioned so that the valve's first and second parts create a valve orifice which changes in size due to the different nuclear radiation caused swelling of the valve's first part compared to the valve's second part. The valve may be used in a nuclear reactor's core coolant system.

  10. Problem: Heart Valve Regurgitation

    MedlinePlus

    ... Pressure High Blood Pressure Tools & Resources Stroke More Problem: Heart Valve Regurgitation Updated:May 26,2016 What ... content was last reviewed May 2016. Heart Valve Problems and Disease • Home • About Heart Valves • Heart Valve ...

  11. Problem: Heart Valve Stenosis

    MedlinePlus

    ... Pressure High Blood Pressure Tools & Resources Stroke More Problem: Heart Valve Stenosis Updated:Aug 10,2016 About ... content was last reviewed May 2016. Heart Valve Problems and Disease • Home • About Heart Valves • Heart Valve ...

  12. [Valve-in-valve with Portico valve for a degenerative bioprosthetic surgical valve (Biocor)].

    PubMed

    Latini, Roberto Adriano; Testa, Luca; Brambilla, Nedy; Tusa, Maurizio; Bedogni, Francesco

    2016-04-01

    In the last years, a general shift toward the use of surgical bioprosthetic aortic valves rather than mechanical valves with subsequent less use of anticoagulant therapy has been observed. However, bioprosthetic valves have limited durability. Reoperation, the current standard of care for these patients, carries a high surgical risk, especially because patients are elderly and with numerous comorbidities. Recently, transcatheter aortic valve replacement within a failed bioprosthetic valve (valve-in-valve procedure) has proven feasible. We here describe a case of valve-in-valve procedure with a Portico valve placed in a purely insufficient bioprosthetic valve (Biocor). PMID:27093211

  13. Wear resistant valve

    NASA Technical Reports Server (NTRS)

    Perkins, Gerald S. (Inventor)

    1980-01-01

    A valve which is resistant to wear caused by particles trapped between the valve seat and the valve member or poppet when the valve closes, including an outlet for directing washing fluid at the valve seat and/or sealing face of the poppet and means for supplying pressured fluid to the outlet at the time when the valve is closing.

  14. Piezoelectric valve

    SciTech Connect

    Petrenko, Serhiy Fedorovich

    2013-01-15

    A motorized valve has a housing having an inlet and an outlet to be connected to a pipeline, a saddle connected with the housing, a turn plug having a rod, the turn plug cooperating with the saddle, and a drive for turning the valve body and formed as a piezoelectric drive, the piezoelectric drive including a piezoelectric generator of radially directed standing acoustic waves, which is connected with the housing and is connectable with a pulse current source, and a rotor operatively connected with the piezoelectric generator and kinematically connected with the rod of the turn plug so as to turn the turn plug when the rotor is actuated by the piezoelectric generator.

  15. Excess flow shutoff valve

    DOEpatents

    Kiffer, Micah S.; Tentarelli, Stephen Clyde

    2016-02-09

    Excess flow shutoff valve comprising a valve body, a valve plug, a partition, and an activation component where the valve plug, the partition, and activation component are disposed within the valve body. A suitable flow restriction is provided to create a pressure difference between the upstream end of the valve plug and the downstream end of the valve plug when fluid flows through the valve body. The pressure difference exceeds a target pressure difference needed to activate the activation component when fluid flow through the valve body is higher than a desired rate, and thereby closes the valve.

  16. ELECTROSTRICTION VALVE

    DOEpatents

    Kippenhan, D.O.

    1962-09-25

    An accurately controlled, pulse gas valve is designed capable of delivering output pulses which vary in length from one-tenth millisecond to one second or more, repeated at intervals of a few milliseconds or- more. The pulsed gas valve comprises a column formed of barium titanate discs mounted in stacked relation and electrically connected in parallel, with means for applying voltage across the discs to cause them to expand and effect a mechanical elongation axially of the column. The column is mounted within an enclosure having an inlet port and an outlet port with an internal seat in communication with the outlet port, such that a plug secured to the end of the column will engage the seat of the outlet port to close the outlet port in response to the application of voltage is regulated by a conventional electronic timing circuit connected to the column. (AEC)

  17. 14 CFR 25.1025 - Oil valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Oil valves. 25.1025 Section 25.1025... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Oil System § 25.1025 Oil valves. (a) Each oil shutoff must meet the requirements of § 25.1189. (b) The closing of oil shutoff means may not prevent...

  18. 14 CFR 25.1025 - Oil valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Oil valves. 25.1025 Section 25.1025... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Oil System § 25.1025 Oil valves. (a) Each oil shutoff must meet the requirements of § 25.1189. (b) The closing of oil shutoff means may not prevent...

  19. 14 CFR 25.1025 - Oil valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Oil valves. 25.1025 Section 25.1025... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Oil System § 25.1025 Oil valves. (a) Each oil shutoff must meet the requirements of § 25.1189. (b) The closing of oil shutoff means may not prevent...

  20. 14 CFR 121.239 - Oil valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Oil valves. 121.239 Section 121.239..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.239 Oil valves. (a) Each oil... oil shutoff means must not prevent feathering the propeller, unless equivalent safety provisions...

  1. 14 CFR 121.239 - Oil valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Oil valves. 121.239 Section 121.239..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.239 Oil valves. (a) Each oil... oil shutoff means must not prevent feathering the propeller, unless equivalent safety provisions...

  2. 14 CFR 29.1025 - Oil valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Oil valves. 29.1025 Section 29.1025... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Oil System § 29.1025 Oil valves. (a) Each oil shutoff must meet the requirements of § 29.1189. (b) The closing of oil shutoffs may not prevent...

  3. 14 CFR 29.1025 - Oil valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Oil valves. 29.1025 Section 29.1025... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Oil System § 29.1025 Oil valves. (a) Each oil shutoff must meet the requirements of § 29.1189. (b) The closing of oil shutoffs may not prevent...

  4. 14 CFR 121.239 - Oil valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Oil valves. 121.239 Section 121.239..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.239 Oil valves. (a) Each oil... oil shutoff means must not prevent feathering the propeller, unless equivalent safety provisions...

  5. 14 CFR 121.239 - Oil valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Oil valves. 121.239 Section 121.239..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.239 Oil valves. (a) Each oil... oil shutoff means must not prevent feathering the propeller, unless equivalent safety provisions...

  6. 14 CFR 29.1025 - Oil valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Oil valves. 29.1025 Section 29.1025... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Oil System § 29.1025 Oil valves. (a) Each oil shutoff must meet the requirements of § 29.1189. (b) The closing of oil shutoffs may not prevent...

  7. 14 CFR 25.1025 - Oil valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Oil valves. 25.1025 Section 25.1025... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Oil System § 25.1025 Oil valves. (a) Each oil shutoff must meet the requirements of § 25.1189. (b) The closing of oil shutoff means may not prevent...

  8. 14 CFR 29.1025 - Oil valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Oil valves. 29.1025 Section 29.1025... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Oil System § 29.1025 Oil valves. (a) Each oil shutoff must meet the requirements of § 29.1189. (b) The closing of oil shutoffs may not prevent...

  9. 14 CFR 121.239 - Oil valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Oil valves. 121.239 Section 121.239..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.239 Oil valves. (a) Each oil... oil shutoff means must not prevent feathering the propeller, unless equivalent safety provisions...

  10. 14 CFR 25.1025 - Oil valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Oil valves. 25.1025 Section 25.1025... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Oil System § 25.1025 Oil valves. (a) Each oil shutoff must meet the requirements of § 25.1189. (b) The closing of oil shutoff means may not prevent...

  11. 14 CFR 29.1025 - Oil valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Oil valves. 29.1025 Section 29.1025... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Oil System § 29.1025 Oil valves. (a) Each oil shutoff must meet the requirements of § 29.1189. (b) The closing of oil shutoffs may not prevent...

  12. 14 CFR 121.235 - Fuel valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Fuel valves. 121.235 Section 121.235 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.235 Fuel valves. Each...

  13. 14 CFR 121.235 - Fuel valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Fuel valves. 121.235 Section 121.235 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.235 Fuel valves. Each...

  14. 14 CFR 121.235 - Fuel valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Fuel valves. 121.235 Section 121.235 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.235 Fuel valves. Each...

  15. 14 CFR 121.235 - Fuel valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Fuel valves. 121.235 Section 121.235 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.235 Fuel valves. Each...

  16. 14 CFR 121.235 - Fuel valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Fuel valves. 121.235 Section 121.235 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.235 Fuel valves. Each...

  17. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Valve maintenance. 195.420 Section 195.420 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each...

  18. 46 CFR 64.67 - Shutoff valve.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Shutoff valve. 64.67 Section 64.67 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.67 Shutoff valve. A shutoff...

  19. 46 CFR 64.67 - Shutoff valve.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Shutoff valve. 64.67 Section 64.67 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.67 Shutoff valve. A shutoff...

  20. 46 CFR 64.67 - Shutoff valve.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Shutoff valve. 64.67 Section 64.67 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.67 Shutoff valve. A shutoff...

  1. 46 CFR 64.67 - Shutoff valve.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Shutoff valve. 64.67 Section 64.67 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.67 Shutoff valve. A shutoff...

  2. 49 CFR 236.837 - Valve, electro-pneumatic.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Valve, electro-pneumatic. 236.837 Section 236.837 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Valve, electro-pneumatic. A valve electrically operated which, when operated, will permit or...

  3. 46 CFR 154.806 - Capacity of pressure relief valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Capacity of pressure relief valves. 154.806 Section 154... Equipment Cargo Vent Systems § 154.806 Capacity of pressure relief valves. Pressure relief valves for each cargo tank must have a combined relief capacity, including the effects of back pressure from vent...

  4. 46 CFR 154.806 - Capacity of pressure relief valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Capacity of pressure relief valves. 154.806 Section 154... Equipment Cargo Vent Systems § 154.806 Capacity of pressure relief valves. Pressure relief valves for each cargo tank must have a combined relief capacity, including the effects of back pressure from vent...

  5. 46 CFR 154.806 - Capacity of pressure relief valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Capacity of pressure relief valves. 154.806 Section 154... Equipment Cargo Vent Systems § 154.806 Capacity of pressure relief valves. Pressure relief valves for each cargo tank must have a combined relief capacity, including the effects of back pressure from vent...

  6. 46 CFR 154.806 - Capacity of pressure relief valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Capacity of pressure relief valves. 154.806 Section 154... Equipment Cargo Vent Systems § 154.806 Capacity of pressure relief valves. Pressure relief valves for each cargo tank must have a combined relief capacity, including the effects of back pressure from vent...

  7. 46 CFR 154.1846 - Relief valves: Changing set pressure.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Relief valves: Changing set pressure. 154.1846 Section... Relief valves: Changing set pressure. The master shall: (a) Supervise the changing of the set pressure of relief valves under § 154.802(b); (b) Enter the change of set pressure in the vessel's log; and...

  8. 46 CFR 105.10-20 - Pressure vacuum relief valve.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in...

  9. 46 CFR 105.10-20 - Pressure vacuum relief valve.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in...

  10. 46 CFR 105.10-20 - Pressure vacuum relief valve.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in...

  11. 46 CFR 154.1846 - Relief valves: Changing set pressure.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Relief valves: Changing set pressure. 154.1846 Section... Relief valves: Changing set pressure. The master shall: (a) Supervise the changing of the set pressure of relief valves under § 154.802(b); (b) Enter the change of set pressure in the vessel's log; and...

  12. 49 CFR 230.52 - Water glass valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Water glass valves. 230.52 Section 230.52... Water Glasses and Gauge Cocks § 230.52 Water glass valves. All water glasses shall be equipped with no more than two valves capable of isolating the water glass from the boiler. They shall also be...

  13. 49 CFR 230.52 - Water glass valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Water glass valves. 230.52 Section 230.52... Water Glasses and Gauge Cocks § 230.52 Water glass valves. All water glasses shall be equipped with no more than two valves capable of isolating the water glass from the boiler. They shall also be...

  14. 49 CFR 230.52 - Water glass valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Water glass valves. 230.52 Section 230.52... Water Glasses and Gauge Cocks § 230.52 Water glass valves. All water glasses shall be equipped with no more than two valves capable of isolating the water glass from the boiler. They shall also be...

  15. 33 CFR 183.528 - Fuel stop valves.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Fuel stop valves. 183.528 Section...) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Equipment Standards § 183.528 Fuel stop valves. (a) Each electrically operated fuel stop valve in a fuel line between the fuel tank and the...

  16. 46 CFR 64.37 - Valve and fitting guard.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Valve and fitting guard. 64.37 Section 64.37 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Standards for an MPT § 64.37 Valve and fitting guard. Each valve and fitting must be protected from mechanical damage by—...

  17. 21 CFR 870.3945 - Prosthetic heart valve sizer.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Prosthetic heart valve sizer. 870.3945 Section 870...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3945 Prosthetic heart valve sizer. (a) Identification. A prosthetic heart valve sizer is a device used to measure the size of...

  18. 21 CFR 870.3925 - Replacement heart valve.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Replacement heart valve. 870.3925 Section 870.3925...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3925 Replacement heart valve. (a) Identification. A replacement heart valve is a device intended to perform the function of...

  19. 21 CFR 870.3925 - Replacement heart valve.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Replacement heart valve. 870.3925 Section 870.3925...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3925 Replacement heart valve. (a) Identification. A replacement heart valve is a device intended to perform the function of...

  20. 21 CFR 870.3945 - Prosthetic heart valve sizer.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Prosthetic heart valve sizer. 870.3945 Section 870...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3945 Prosthetic heart valve sizer. (a) Identification. A prosthetic heart valve sizer is a device used to measure the size of...

  1. 21 CFR 870.3945 - Prosthetic heart valve sizer.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Prosthetic heart valve sizer. 870.3945 Section 870...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3945 Prosthetic heart valve sizer. (a) Identification. A prosthetic heart valve sizer is a device used to measure the size of...

  2. 21 CFR 870.3945 - Prosthetic heart valve sizer.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Prosthetic heart valve sizer. 870.3945 Section 870...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3945 Prosthetic heart valve sizer. (a) Identification. A prosthetic heart valve sizer is a device used to measure the size of...

  3. 21 CFR 870.3925 - Replacement heart valve.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Replacement heart valve. 870.3925 Section 870.3925...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3925 Replacement heart valve. (a) Identification. A replacement heart valve is a device intended to perform the function of...

  4. 21 CFR 870.3945 - Prosthetic heart valve sizer.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Prosthetic heart valve sizer. 870.3945 Section 870...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3945 Prosthetic heart valve sizer. (a) Identification. A prosthetic heart valve sizer is a device used to measure the size of...

  5. 46 CFR 176.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Breaking of safety valve seals. 176.704 Section 176.704... TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.704 Breaking of safety valve seals... the seal on a boiler safety valve on a vessel is broken....

  6. 46 CFR 176.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Breaking of safety valve seals. 176.704 Section 176.704... TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.704 Breaking of safety valve seals... the seal on a boiler safety valve on a vessel is broken....

  7. 46 CFR 115.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Breaking of safety valve seals. 115.704 Section 115.704... CERTIFICATION Repairs and Alterations § 115.704 Breaking of safety valve seals. The owner, managing operator, or master shall notify the cognizant OCMI as soon as practicable after the seal on a boiler safety valve...

  8. 46 CFR 115.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Breaking of safety valve seals. 115.704 Section 115.704... CERTIFICATION Repairs and Alterations § 115.704 Breaking of safety valve seals. The owner, managing operator, or master shall notify the cognizant OCMI as soon as practicable after the seal on a boiler safety valve...

  9. 46 CFR 176.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Breaking of safety valve seals. 176.704 Section 176.704... TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.704 Breaking of safety valve seals... the seal on a boiler safety valve on a vessel is broken....

  10. 46 CFR 115.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Breaking of safety valve seals. 115.704 Section 115.704... CERTIFICATION Repairs and Alterations § 115.704 Breaking of safety valve seals. The owner, managing operator, or master shall notify the cognizant OCMI as soon as practicable after the seal on a boiler safety valve...

  11. 46 CFR 115.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Breaking of safety valve seals. 115.704 Section 115.704... CERTIFICATION Repairs and Alterations § 115.704 Breaking of safety valve seals. The owner, managing operator, or master shall notify the cognizant OCMI as soon as practicable after the seal on a boiler safety valve...

  12. 46 CFR 176.704 - Breaking of safety valve seals.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Breaking of safety valve seals. 176.704 Section 176.704... TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.704 Breaking of safety valve seals... the seal on a boiler safety valve on a vessel is broken....

  13. 46 CFR 64.59 - Spring loaded pressure relief valve.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Spring loaded pressure relief valve. 64.59 Section 64.59... AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.59 Spring loaded pressure relief valve. A spring loaded pressure relief valve must— (a) Be set at a...

  14. 46 CFR 64.59 - Spring loaded pressure relief valve.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Spring loaded pressure relief valve. 64.59 Section 64.59... AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.59 Spring loaded pressure relief valve. A spring loaded pressure relief valve must— (a) Be set at a...

  15. 46 CFR 64.59 - Spring loaded pressure relief valve.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Spring loaded pressure relief valve. 64.59 Section 64.59... AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.59 Spring loaded pressure relief valve. A spring loaded pressure relief valve must— (a) Be set at a...

  16. 49 CFR 230.52 - Water glass valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Water Glasses and Gauge Cocks § 230.52 Water glass valves. All water glasses shall be equipped with no more than two valves capable of isolating the water glass from the boiler. They shall also be equipped... 49 Transportation 4 2013-10-01 2013-10-01 false Water glass valves. 230.52 Section...

  17. 49 CFR 192.193 - Valve installation in plastic pipe.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Valve installation in plastic pipe. 192.193... Components § 192.193 Valve installation in plastic pipe. Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the...

  18. 49 CFR 192.193 - Valve installation in plastic pipe.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Valve installation in plastic pipe. 192.193... Components § 192.193 Valve installation in plastic pipe. Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the...

  19. 49 CFR 192.193 - Valve installation in plastic pipe.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Valve installation in plastic pipe. 192.193... Components § 192.193 Valve installation in plastic pipe. Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the...

  20. 49 CFR 192.193 - Valve installation in plastic pipe.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Valve installation in plastic pipe. 192.193... Components § 192.193 Valve installation in plastic pipe. Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the...

  1. 49 CFR 192.383 - Excess flow valve installation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Excess flow valve installation. 192.383 Section..., and Service Lines § 192.383 Excess flow valve installation. (a) Definitions. As used in this section... serves only one single-family residence. (b) Installation required. An excess flow valve...

  2. 46 CFR 154.546 - Excess flow valve: Closing flow.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Excess flow valve: Closing flow. 154.546 Section 154.546... and Process Piping Systems § 154.546 Excess flow valve: Closing flow. (a) The rated closing flow of vapor or liquid cargo for an excess flow valve must be specially approved by the Commandant (CG-522)....

  3. 46 CFR 154.550 - Excess flow valve: Bypass.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Excess flow valve: Bypass. 154.550 Section 154.550 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.550 Excess flow valve: Bypass. If the excess flow valve allowed...

  4. 46 CFR 154.1315 - Restricted gauge excess flow valve.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Restricted gauge excess flow valve. 154.1315 Section 154... Equipment Instrumentation § 154.1315 Restricted gauge excess flow valve. Each restricted gauge that penetrates a cargo tank must have an excess flow valve unless the gauge meets § 154.536....

  5. 30 CFR 57.14114 - Air valves for pneumatic equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Air valves for pneumatic equipment. 57.14114... and Equipment Safety Devices and Maintenance Requirements § 57.14114 Air valves for pneumatic equipment. A manual master quick-close type air valve shall be installed on all pneumatic-powered...

  6. 49 CFR 236.837 - Valve, electro-pneumatic.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Valve, electro-pneumatic. 236.837 Section 236.837 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Valve, electro-pneumatic. A valve electrically operated which, when operated, will permit or...

  7. 46 CFR 169.746 - Fuel shutoff valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Fuel shutoff valves. 169.746 Section 169.746 Shipping... Control, Miscellaneous Systems, and Equipment Markings § 169.746 Fuel shutoff valves. Each remote fuel shutoff station must be marked in at least 1-inch letters indicating purpose of the valves and...

  8. 14 CFR 23.995 - Fuel valves and controls.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Fuel valves and controls. 23.995 Section 23... Components § 23.995 Fuel valves and controls. (a) There must be a means to allow appropriate flight crew members to rapidly shut off, in flight, the fuel to each engine individually. (b) No shutoff valve may...

  9. 46 CFR 154.1846 - Relief valves: Changing set pressure.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Relief valves: Changing set pressure. 154.1846 Section... Relief valves: Changing set pressure. The master shall: (a) Supervise the changing of the set pressure of relief valves under § 154.802(b); (b) Enter the change of set pressure in the vessel's log; and...

  10. 30 CFR 56.16006 - Protection of gas cylinder valves.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Protection of gas cylinder valves. 56.16006 Section 56.16006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16006 Protection of gas cylinder valves. Valves on compressed gas...

  11. 46 CFR 64.41 - Stop valve closure.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Stop valve closure. 64.41 Section 64.41 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Standards for an MPT § 64.41 Stop valve closure. A stop valve that operates by a...

  12. 30 CFR 56.14114 - Air valves for pneumatic equipment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Air valves for pneumatic equipment. 56.14114... Equipment Safety Devices and Maintenance Requirements § 56.14114 Air valves for pneumatic equipment. A manual master quick-close type air valve shall be installed on all pneumatic-powered equipment if...

  13. 49 CFR 192.383 - Excess flow valve installation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Excess flow valve installation. 192.383 Section..., and Service Lines § 192.383 Excess flow valve installation. (a) Definitions. As used in this section... serves only one single-family residence. (b) Installation required. An excess flow valve...

  14. 46 CFR 64.39 - Valve securing device.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Valve securing device. 64.39 Section 64.39 Shipping... CARGO HANDLING SYSTEMS Standards for an MPT § 64.39 Valve securing device. Each filling and discharge valve must have a securing device to prevent unintentional opening....

  15. 46 CFR 78.47-38 - Valves and closing appliances.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Valves and closing appliances. 78.47-38 Section 78.47-38 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings for Fire and Emergency Equipment, Etc. § 78.47-38 Valves and closing appliances. (a) All valves and...

  16. 49 CFR 192.747 - Valve maintenance: Distribution systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Valve maintenance: Distribution systems. 192.747... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Maintenance § 192.747 Valve maintenance: Distribution systems. (a) Each valve, the use of which may be necessary for the safe operation...

  17. 46 CFR 64.39 - Valve securing device.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Valve securing device. 64.39 Section 64.39 Shipping... CARGO HANDLING SYSTEMS Standards for an MPT § 64.39 Valve securing device. Each filling and discharge valve must have a securing device to prevent unintentional opening....

  18. 30 CFR 57.16006 - Protection of gas cylinder valves.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Protection of gas cylinder valves. 57.16006 Section 57.16006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16006 Protection of gas cylinder valves. Valves on compressed gas...

  19. 30 CFR 57.14114 - Air valves for pneumatic equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Air valves for pneumatic equipment. 57.14114... and Equipment Safety Devices and Maintenance Requirements § 57.14114 Air valves for pneumatic equipment. A manual master quick-close type air valve shall be installed on all pneumatic-powered...

  20. 46 CFR 64.41 - Stop valve closure.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Stop valve closure. 64.41 Section 64.41 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Standards for an MPT § 64.41 Stop valve closure. A stop valve that operates by a...

  1. 30 CFR 57.14114 - Air valves for pneumatic equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Air valves for pneumatic equipment. 57.14114... and Equipment Safety Devices and Maintenance Requirements § 57.14114 Air valves for pneumatic equipment. A manual master quick-close type air valve shall be installed on all pneumatic-powered...

  2. 46 CFR 109.333 - Fire main cutoff valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Fire main cutoff valves. 109.333 Section 109.333... OPERATIONS Operation and Stowage of Safety Equipment § 109.333 Fire main cutoff valves. The master or person in charge shall insure that each fire main cutoff valve is open and sealed to prevent closing,...

  3. 46 CFR 153.980 - Isolation of automatic closing valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Isolation of automatic closing valves. 153.980 Section... Transfer Procedures § 153.980 Isolation of automatic closing valves. The person in charge of cargo transfer may isolate automatic closing valves described in § 153.408(b) from a cargo containment system if...

  4. 49 CFR 236.837 - Valve, electro-pneumatic.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Valve, electro-pneumatic. 236.837 Section 236.837 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Valve, electro-pneumatic. A valve electrically operated which, when operated, will permit or...

  5. 46 CFR 154.550 - Excess flow valve: Bypass.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Excess flow valve: Bypass. 154.550 Section 154.550 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.550 Excess flow valve: Bypass. If the excess flow valve allowed...

  6. 49 CFR 192.747 - Valve maintenance: Distribution systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Valve maintenance: Distribution systems. 192.747... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Maintenance § 192.747 Valve maintenance: Distribution systems. (a) Each valve, the use of which may be necessary for the safe operation...

  7. 30 CFR 57.14114 - Air valves for pneumatic equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Air valves for pneumatic equipment. 57.14114... and Equipment Safety Devices and Maintenance Requirements § 57.14114 Air valves for pneumatic equipment. A manual master quick-close type air valve shall be installed on all pneumatic-powered...

  8. 46 CFR 64.41 - Stop valve closure.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Stop valve closure. 64.41 Section 64.41 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Standards for an MPT § 64.41 Stop valve closure. A stop valve that operates by a...

  9. 40 CFR 61.242-7 - Standards: Valves.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 9 2012-07-01 2012-07-01 false Standards: Valves. 61.242-7 Section 61... (Fugitive Emission Sources) § 61.242-7 Standards: Valves. (a) Each valve shall be monitored monthly to...) If an instrument reading of 10,000 ppm or greater is measured, a leak is detected. (c)(1) Any...

  10. 46 CFR 193.15-16 - Lockout valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Lockout valves. 193.15-16 Section 193.15-16 Shipping... EQUIPMENT Carbon Dioxide and Clean Agent Extinguishing Systems, Details § 193.15-16 Lockout valves. (a) A lockout valve must be provided on any carbon dioxide extinguishing system protecting a space over...

  11. 30 CFR 57.16006 - Protection of gas cylinder valves.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Protection of gas cylinder valves. 57.16006 Section 57.16006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16006 Protection of gas cylinder valves. Valves on compressed gas...

  12. 14 CFR 23.995 - Fuel valves and controls.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel valves and controls. 23.995 Section 23... Components § 23.995 Fuel valves and controls. (a) There must be a means to allow appropriate flight crew members to rapidly shut off, in flight, the fuel to each engine individually. (b) No shutoff valve may...

  13. 46 CFR 154.546 - Excess flow valve: Closing flow.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Excess flow valve: Closing flow. 154.546 Section 154.546... and Process Piping Systems § 154.546 Excess flow valve: Closing flow. (a) The rated closing flow of vapor or liquid cargo for an excess flow valve must be specially approved by the Commandant (CG-ENG)....

  14. 30 CFR 57.16006 - Protection of gas cylinder valves.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Protection of gas cylinder valves. 57.16006 Section 57.16006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16006 Protection of gas cylinder valves. Valves on compressed gas...

  15. 46 CFR 154.546 - Excess flow valve: Closing flow.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Excess flow valve: Closing flow. 154.546 Section 154.546... and Process Piping Systems § 154.546 Excess flow valve: Closing flow. (a) The rated closing flow of vapor or liquid cargo for an excess flow valve must be specially approved by the Commandant (CG-ENG)....

  16. 33 CFR 183.528 - Fuel stop valves.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Fuel stop valves. 183.528 Section...) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Equipment Standards § 183.528 Fuel stop valves. (a) Each electrically operated fuel stop valve in a fuel line between the fuel tank and the...

  17. 30 CFR 56.16006 - Protection of gas cylinder valves.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Protection of gas cylinder valves. 56.16006 Section 56.16006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16006 Protection of gas cylinder valves. Valves on compressed gas...

  18. 14 CFR 23.995 - Fuel valves and controls.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Fuel valves and controls. 23.995 Section 23... Components § 23.995 Fuel valves and controls. (a) There must be a means to allow appropriate flight crew members to rapidly shut off, in flight, the fuel to each engine individually. (b) No shutoff valve may...

  19. 30 CFR 56.14114 - Air valves for pneumatic equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Air valves for pneumatic equipment. 56.14114... Equipment Safety Devices and Maintenance Requirements § 56.14114 Air valves for pneumatic equipment. A manual master quick-close type air valve shall be installed on all pneumatic-powered equipment if...

  20. 46 CFR 154.550 - Excess flow valve: Bypass.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Excess flow valve: Bypass. 154.550 Section 154.550 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.550 Excess flow valve: Bypass. If the excess flow valve allowed...

  1. 46 CFR 154.1315 - Restricted gauge excess flow valve.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Restricted gauge excess flow valve. 154.1315 Section 154... Equipment Instrumentation § 154.1315 Restricted gauge excess flow valve. Each restricted gauge that penetrates a cargo tank must have an excess flow valve unless the gauge meets § 154.536....

  2. 46 CFR 45.155 - Inlets and discharge piping: Valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Inlets and discharge piping: Valves. 45.155 Section 45... LINES Conditions of Assignment § 45.155 Inlets and discharge piping: Valves. (a) Except as provided in... have— (1) An automatic nonreturn valve with a positive means for closing; or (2) Two...

  3. 46 CFR 109.333 - Fire main cutoff valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Fire main cutoff valves. 109.333 Section 109.333... OPERATIONS Operation and Stowage of Safety Equipment § 109.333 Fire main cutoff valves. The master or person in charge shall insure that each fire main cutoff valve is open and sealed to prevent closing,...

  4. 30 CFR 57.16006 - Protection of gas cylinder valves.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Protection of gas cylinder valves. 57.16006 Section 57.16006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16006 Protection of gas cylinder valves. Valves on compressed gas...

  5. 46 CFR 45.155 - Inlets and discharge piping: Valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Inlets and discharge piping: Valves. 45.155 Section 45... LINES Conditions of Assignment § 45.155 Inlets and discharge piping: Valves. (a) Except as provided in... have— (1) An automatic nonreturn valve with a positive means for closing; or (2) Two...

  6. 46 CFR 64.39 - Valve securing device.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Valve securing device. 64.39 Section 64.39 Shipping... CARGO HANDLING SYSTEMS Standards for an MPT § 64.39 Valve securing device. Each filling and discharge valve must have a securing device to prevent unintentional opening....

  7. 30 CFR 57.16006 - Protection of gas cylinder valves.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Protection of gas cylinder valves. 57.16006 Section 57.16006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16006 Protection of gas cylinder valves. Valves on compressed gas...

  8. 46 CFR 64.39 - Valve securing device.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Valve securing device. 64.39 Section 64.39 Shipping... CARGO HANDLING SYSTEMS Standards for an MPT § 64.39 Valve securing device. Each filling and discharge valve must have a securing device to prevent unintentional opening....

  9. 33 CFR 183.528 - Fuel stop valves.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Fuel stop valves. 183.528 Section...) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Equipment Standards § 183.528 Fuel stop valves. (a) Each electrically operated fuel stop valve in a fuel line between the fuel tank and the...

  10. 40 CFR 61.242-7 - Standards: Valves.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 9 2013-07-01 2013-07-01 false Standards: Valves. 61.242-7 Section 61... (Fugitive Emission Sources) § 61.242-7 Standards: Valves. (a) Each valve shall be monitored monthly to...) If an instrument reading of 10,000 ppm or greater is measured, a leak is detected. (c)(1) Any...

  11. 49 CFR 236.837 - Valve, electro-pneumatic.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Valve, electro-pneumatic. 236.837 Section 236.837 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Valve, electro-pneumatic. A valve electrically operated which, when operated, will permit or...

  12. 46 CFR 185.608 - Fuel shutoff valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Fuel shutoff valves. 185.608 Section 185.608 Shipping...) OPERATIONS Markings Required § 185.608 Fuel shutoff valves. Remote fuel shutoff stations must be marked in clearly legible letters at least 25 millimeters (1 inch) high indicating purpose of the valve...

  13. 40 CFR 61.242-7 - Standards: Valves.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standards: Valves. 61.242-7 Section 61... (Fugitive Emission Sources) § 61.242-7 Standards: Valves. (a) Each valve shall be monitored monthly to...) If an instrument reading of 10,000 ppm or greater is measured, a leak is detected. (c)(1) Any...

  14. 46 CFR 154.1315 - Restricted gauge excess flow valve.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Restricted gauge excess flow valve. 154.1315 Section 154... Equipment Instrumentation § 154.1315 Restricted gauge excess flow valve. Each restricted gauge that penetrates a cargo tank must have an excess flow valve unless the gauge meets § 154.536....

  15. 46 CFR 122.608 - Fuel shutoff valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Fuel shutoff valves. 122.608 Section 122.608 Shipping....608 Fuel shutoff valves. Remote fuel shutoff stations must be marked in clearly legible letters at least 25 millimeters (1 inch) high indicating purpose of the valve and direction of operations....

  16. 46 CFR 153.980 - Isolation of automatic closing valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Isolation of automatic closing valves. 153.980 Section... Transfer Procedures § 153.980 Isolation of automatic closing valves. The person in charge of cargo transfer may isolate automatic closing valves described in § 153.408(b) from a cargo containment system if...

  17. 30 CFR 56.16006 - Protection of gas cylinder valves.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Protection of gas cylinder valves. 56.16006 Section 56.16006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16006 Protection of gas cylinder valves. Valves on compressed gas...

  18. 30 CFR 56.16006 - Protection of gas cylinder valves.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Protection of gas cylinder valves. 56.16006 Section 56.16006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16006 Protection of gas cylinder valves. Valves on compressed gas...

  19. 46 CFR 153.980 - Isolation of automatic closing valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Isolation of automatic closing valves. 153.980 Section... Transfer Procedures § 153.980 Isolation of automatic closing valves. The person in charge of cargo transfer may isolate automatic closing valves described in § 153.408(b) from a cargo containment system if...

  20. 46 CFR 154.550 - Excess flow valve: Bypass.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Excess flow valve: Bypass. 154.550 Section 154.550 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.550 Excess flow valve: Bypass. If the excess flow valve allowed...

  1. 30 CFR 56.14114 - Air valves for pneumatic equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Air valves for pneumatic equipment. 56.14114... Equipment Safety Devices and Maintenance Requirements § 56.14114 Air valves for pneumatic equipment. A manual master quick-close type air valve shall be installed on all pneumatic-powered equipment if...

  2. 40 CFR 61.242-7 - Standards: Valves.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Standards: Valves. 61.242-7 Section 61... (Fugitive Emission Sources) § 61.242-7 Standards: Valves. (a) Each valve shall be monitored monthly to...) If an instrument reading of 10,000 ppm or greater is measured, a leak is detected. (c)(1) Any...

  3. 14 CFR 23.995 - Fuel valves and controls.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Fuel valves and controls. 23.995 Section 23... Components § 23.995 Fuel valves and controls. (a) There must be a means to allow appropriate flight crew members to rapidly shut off, in flight, the fuel to each engine individually. (b) No shutoff valve may...

  4. 40 CFR 61.242-7 - Standards: Valves.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 9 2014-07-01 2014-07-01 false Standards: Valves. 61.242-7 Section 61... (Fugitive Emission Sources) § 61.242-7 Standards: Valves. (a) Each valve shall be monitored monthly to...) If an instrument reading of 10,000 ppm or greater is measured, a leak is detected. (c)(1) Any...

  5. 46 CFR 108.443 - Controls and valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Controls and valves. 108.443 Section 108.443 Shipping... valves. (a) At least one control for operating a CO2 system must be outside the space or spaces that the... system protects. Control valves must not be located in a protected space unless the CO2 cylinders...

  6. 49 CFR 192.747 - Valve maintenance: Distribution systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Valve maintenance: Distribution systems. 192.747... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Maintenance § 192.747 Valve maintenance: Distribution systems. (a) Each valve, the use of which may be necessary for the safe operation...

  7. 30 CFR 57.14114 - Air valves for pneumatic equipment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Air valves for pneumatic equipment. 57.14114... and Equipment Safety Devices and Maintenance Requirements § 57.14114 Air valves for pneumatic equipment. A manual master quick-close type air valve shall be installed on all pneumatic-powered...

  8. 30 CFR 56.16006 - Protection of gas cylinder valves.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Protection of gas cylinder valves. 56.16006 Section 56.16006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16006 Protection of gas cylinder valves. Valves on compressed gas...

  9. 46 CFR 45.155 - Inlets and discharge piping: Valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Inlets and discharge piping: Valves. 45.155 Section 45... LINES Conditions of Assignment § 45.155 Inlets and discharge piping: Valves. (a) Except as provided in... have— (1) An automatic nonreturn valve with a positive means for closing; or (2) Two...

  10. 33 CFR 183.528 - Fuel stop valves.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Fuel stop valves. 183.528 Section...) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Equipment Standards § 183.528 Fuel stop valves. (a) Each electrically operated fuel stop valve in a fuel line between the fuel tank and the...

  11. 30 CFR 56.14114 - Air valves for pneumatic equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Air valves for pneumatic equipment. 56.14114... Equipment Safety Devices and Maintenance Requirements § 56.14114 Air valves for pneumatic equipment. A manual master quick-close type air valve shall be installed on all pneumatic-powered equipment if...

  12. 30 CFR 56.14114 - Air valves for pneumatic equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Air valves for pneumatic equipment. 56.14114... Equipment Safety Devices and Maintenance Requirements § 56.14114 Air valves for pneumatic equipment. A manual master quick-close type air valve shall be installed on all pneumatic-powered equipment if...

  13. 46 CFR 109.333 - Fire main cutoff valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Fire main cutoff valves. 109.333 Section 109.333... OPERATIONS Operation and Stowage of Safety Equipment § 109.333 Fire main cutoff valves. The master or person in charge shall insure that each fire main cutoff valve is open and sealed to prevent closing,...

  14. 46 CFR 64.41 - Stop valve closure.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Stop valve closure. 64.41 Section 64.41 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Standards for an MPT § 64.41 Stop valve closure. A stop valve that operates by a...

  15. 46 CFR 108.443 - Controls and valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Controls and valves. 108.443 Section 108.443 Shipping... valves. (a) At least one control for operating a CO2 system must be outside the space or spaces that the... system protects. Control valves must not be located in a protected space unless the CO2 cylinders...

  16. 46 CFR 78.47-38 - Valves and closing appliances.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 3 2014-10-01 2014-10-01 false Valves and closing appliances. 78.47-38 Section 78.47-38... Fire and Emergency Equipment, Etc. § 78.47-38 Valves and closing appliances. (a) All valves and closing... direction of operation. In all cases indication shall be provided to show whether the control is open...

  17. 46 CFR 78.47-38 - Valves and closing appliances.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 3 2013-10-01 2013-10-01 false Valves and closing appliances. 78.47-38 Section 78.47-38... Fire and Emergency Equipment, Etc. § 78.47-38 Valves and closing appliances. (a) All valves and closing... direction of operation. In all cases indication shall be provided to show whether the control is open...

  18. 46 CFR 78.47-38 - Valves and closing appliances.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 3 2012-10-01 2012-10-01 false Valves and closing appliances. 78.47-38 Section 78.47-38... Fire and Emergency Equipment, Etc. § 78.47-38 Valves and closing appliances. (a) All valves and closing... direction of operation. In all cases indication shall be provided to show whether the control is open...

  19. 46 CFR 154.519 - Piping relief valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping relief valves. 154.519 Section 154.519 Shipping... Process Piping Systems § 154.519 Piping relief valves. (a) The liquid relief valve that protects the cargo piping system from liquid pressure exceeding the design pressure must discharge into: (1) A cargo...

  20. 46 CFR 154.1125 - Pipes, fittings, and valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Pipes, fittings, and valves. 154.1125 Section 154.1125... Firefighting § 154.1125 Pipes, fittings, and valves. (a) Each pipe, fitting, and valve for each water spray...-connection from the water spray system to the fire main must be outside of the cargo area. (d) Each...

  1. 33 CFR 183.528 - Fuel stop valves.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Fuel stop valves. 183.528 Section...) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Equipment Standards § 183.528 Fuel stop valves. (a) Each electrically operated fuel stop valve in a fuel line between the fuel tank and the...

  2. 46 CFR 193.15-16 - Lockout valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Lockout valves. 193.15-16 Section 193.15-16 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS FIRE PROTECTION EQUIPMENT Carbon Dioxide and Clean Agent Extinguishing Systems, Details § 193.15-16 Lockout valves. (a) A lockout valve must be provided on...

  3. 46 CFR 105.10-20 - Pressure vacuum relief valve.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in...

  4. 46 CFR 45.155 - Inlets and discharge piping: Valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Inlets and discharge piping: Valves. 45.155 Section 45... LINES Conditions of Assignment § 45.155 Inlets and discharge piping: Valves. (a) Except as provided in... not have continuous bilge water monitoring, a valve described in paragraph (a)(1) of this section...

  5. 49 CFR 192.747 - Valve maintenance: Distribution systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Valve maintenance: Distribution systems. 192.747... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Maintenance § 192.747 Valve maintenance: Distribution systems. (a) Each valve, the use of which may be necessary for the safe operation...

  6. Mitral Valve Prolapse

    MedlinePlus

    ... Long Q-T Syndrome Marfan Syndrome Metabolic Syndrome Mitral Valve Prolapse Myocardial Bridge Myocarditis Obstructive Sleep Apnea Pericarditis ... Stroke Sudden Cardiac Arrest Valve Disease Vulnerable Plaque Mitral Valve Prolapse | Share Related terms: MVP, disease of the ...

  7. Mitral Valve Prolapse

    MedlinePlus

    Mitral valve prolapse (MVP) occurs when one of your heart's valves doesn't work properly. The flaps of ... Migraine headaches Chest discomfort Most people who have mitral valve prolapse (MVP) don't need treatment because they ...

  8. Automatic shutoff valve

    NASA Technical Reports Server (NTRS)

    Hawkins, S. F.; Overbey, C. W.

    1980-01-01

    Cellulose-sponge disk absorbs incoming water and expands with enough force to shut valve. When water recedes, valve opens by squeezing sponge dry to its original size. This direct mechanical action is considered more reliable than solenoid valve.

  9. Aortic Valve Disease

    MedlinePlus

    ... Disease Tricuspid Valve Disease Cardiac Rhythm Disturbances Thoracic Aortic Aneurysm Pediatric and Congenital Heart Disease Heart abnormalities that ... Disease Tricuspid Valve Disease Cardiac Rhythm Disturbances Thoracic Aortic Aneurysm Aortic Valve Disease Overview The human heart has ...

  10. Mitral Valve Prolapse

    MedlinePlus

    ... Problem: Pulmonary Valve Regurgitation Heart Valves and Infective Endocarditis • Risks, Signs and Symptoms • Accurate Diagnosis • Treatment Options • ... Surgery? Recovery Milestones Checklist | Spanish What Is Infective Endocarditis? | Spanish Interactive Treatment Guide Quiz yourself: Heart Valves ...

  11. 40 CFR 60.483-1a - Alternative standards for valves-allowable percentage of valves leaking.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Alternative standards for valves-allowable percentage of valves leaking. 60.483-1a Section 60.483-1a Protection of Environment ENVIRONMENTAL...-1a Alternative standards for valves—allowable percentage of valves leaking. (a) An owner or...

  12. 40 CFR 60.483-1a - Alternative standards for valves-allowable percentage of valves leaking.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Alternative standards for valves-allowable percentage of valves leaking. 60.483-1a Section 60.483-1a Protection of Environment ENVIRONMENTAL...-1a Alternative standards for valves—allowable percentage of valves leaking. (a) An owner or...

  13. 40 CFR 60.483-1a - Alternative standards for valves-allowable percentage of valves leaking.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Alternative standards for valves-allowable percentage of valves leaking. 60.483-1a Section 60.483-1a Protection of Environment ENVIRONMENTAL...-1a Alternative standards for valves—allowable percentage of valves leaking. (a) An owner or...

  14. 40 CFR 60.483-1a - Alternative standards for valves-allowable percentage of valves leaking.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Alternative standards for valves-allowable percentage of valves leaking. 60.483-1a Section 60.483-1a Protection of Environment ENVIRONMENTAL...-1a Alternative standards for valves—allowable percentage of valves leaking. (a) An owner or...

  15. 40 CFR 60.483-1a - Alternative standards for valves-allowable percentage of valves leaking.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Alternative standards for valves-allowable percentage of valves leaking. 60.483-1a Section 60.483-1a Protection of Environment ENVIRONMENTAL...-1a Alternative standards for valves—allowable percentage of valves leaking. (a) An owner or...

  16. Magnetically operated check valve

    NASA Technical Reports Server (NTRS)

    Morris, Brian G. (Inventor); Bozeman, Richard J., Jr. (Inventor)

    1994-01-01

    A magnetically operated check valve is disclosed. The valve is comprised of a valve body and a movable poppet disposed therein. A magnet attracts the poppet to hold the valve shut until the force of fluid flow through the valve overcomes the magnetic attraction and moves the poppet to an unseated, open position. The poppet and magnet are configured and disposed to trap a magnetically attracted particulate and prevent it from flowing to a valve seating region.

  17. Pulmonary valve stenosis

    MedlinePlus

    ... valve pulmonary stenosis; Pulmonary stenosis; Stenosis - pulmonary valve; Balloon valvuloplasty - pulmonary ... water pills) Treat abnormal heartbeats and rhythms Percutaneous balloon pulmonary dilation (valvuloplasty) may be performed when no ...

  18. Fast-Acting Valve

    NASA Technical Reports Server (NTRS)

    Wojciechowski, Bogdan V. (Inventor); Pegg, Robert J. (Inventor)

    2003-01-01

    A fast-acting valve includes an annular valve seat that defines an annular valve orifice between the edges of the annular valve seat, an annular valve plug sized to cover the valve orifice when the valve is closed, and a valve-plug holder for moving the annular valve plug on and off the annular valve seat. The use of an annular orifice reduces the characteristic distance between the edges of the valve seat. Rather than this distance being equal to the diameter of the orifice, as it is for a conventional circular orifice, the characteristic distance equals the distance between the inner and outer radii (for a circular annulus). The reduced characteristic distance greatly reduces the gap required between the annular valve plug and the annular valve seat for the valve to be fully open, thereby greatly reducing the required stroke and corresponding speed and acceleration of the annular valve plug. The use of a valve-plug holder that is under independent control to move the annular valve plug between its open and closed positions is important for achieving controllable fast operation of the valve.

  19. 40 CFR 60.482-6 - Standards: Open-ended valves or lines.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standards: Open-ended valves or lines... Standards: Open-ended valves or lines. (a)(1) Each open-ended valve or line shall be equipped with a cap... this section. (2) The cap, blind flange, plug, or second valve shall seal the open end at all...

  20. 40 CFR 60.482-6 - Standards: Open-ended valves or lines.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Standards: Open-ended valves or lines... Standards: Open-ended valves or lines. (a)(1) Each open-ended valve or line shall be equipped with a cap... this section. (2) The cap, blind flange, plug, or second valve shall seal the open end at all...

  1. 40 CFR 60.482-6 - Standards: Open-ended valves or lines.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standards: Open-ended valves or lines... Standards: Open-ended valves or lines. (a)(1) Each open-ended valve or line shall be equipped with a cap... this section. (2) The cap, blind flange, plug, or second valve shall seal the open end at all...

  2. 40 CFR 60.482-6 - Standards: Open-ended valves or lines.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standards: Open-ended valves or lines... Standards: Open-ended valves or lines. (a)(1) Each open-ended valve or line shall be equipped with a cap... this section. (2) The cap, blind flange, plug, or second valve shall seal the open end at all...

  3. 40 CFR 60.482-6 - Standards: Open-ended valves or lines.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standards: Open-ended valves or lines... Standards: Open-ended valves or lines. (a)(1) Each open-ended valve or line shall be equipped with a cap... this section. (2) The cap, blind flange, plug, or second valve shall seal the open end at all...

  4. 49 CFR 179.300-13 - Venting, loading and unloading valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Venting, loading and unloading valves. 179.300-13..., loading and unloading valves. (a) Valves shall be of approved type, made of metal not subject to rapid deterioration by lading, and shall withstand tank test pressure without leakage. The valves shall be...

  5. 49 CFR 179.300-13 - Venting, loading and unloading valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Venting, loading and unloading valves. 179.300-13..., loading and unloading valves. (a) Valves shall be of approved type, made of metal not subject to rapid deterioration by lading, and shall withstand tank test pressure without leakage. The valves shall be...

  6. 42 CFR 84.204 - Exhalation valve leakage test; minimum requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Exhalation valve leakage test; minimum requirements... Chemical Cartridge Respirators § 84.204 Exhalation valve leakage test; minimum requirements. (a) Dry... normal operating position. (b) Leakage between the valve and valve seat shall not exceed 30...

  7. 42 CFR 84.182 - Exhalation valve leakage test; minimum requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Exhalation valve leakage test; minimum requirements...-Powered Air-Purifying Particulate Respirators § 84.182 Exhalation valve leakage test; minimum requirements... height while in a normal operating position. (b) Leakage between the valve and valve seat shall...

  8. 40 CFR 60.483-1 - Alternative standards for valves-allowable percentage of valves leaking.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Alternative standards for valves-allowable percentage of valves leaking. 60.483-1 Section 60.483-1 Protection of Environment ENVIRONMENTAL... Before November 7, 2006 § 60.483-1 Alternative standards for valves—allowable percentage of...

  9. 40 CFR 60.483-1 - Alternative standards for valves-allowable percentage of valves leaking.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Alternative standards for valves-allowable percentage of valves leaking. 60.483-1 Section 60.483-1 Protection of Environment ENVIRONMENTAL... Before November 7, 2006 § 60.483-1 Alternative standards for valves—allowable percentage of...

  10. 40 CFR 60.483-1 - Alternative standards for valves-allowable percentage of valves leaking.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Alternative standards for valves-allowable percentage of valves leaking. 60.483-1 Section 60.483-1 Protection of Environment ENVIRONMENTAL... Before November 7, 2006 § 60.483-1 Alternative standards for valves—allowable percentage of...

  11. 40 CFR 60.483-1 - Alternative standards for valves-allowable percentage of valves leaking.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Alternative standards for valves-allowable percentage of valves leaking. 60.483-1 Section 60.483-1 Protection of Environment ENVIRONMENTAL... Before November 7, 2006 § 60.483-1 Alternative standards for valves—allowable percentage of...

  12. 40 CFR 60.483-1 - Alternative standards for valves-allowable percentage of valves leaking.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Alternative standards for valves-allowable percentage of valves leaking. 60.483-1 Section 60.483-1 Protection of Environment ENVIRONMENTAL... Before November 7, 2006 § 60.483-1 Alternative standards for valves—allowable percentage of...

  13. Remote actuated valve implant

    DOEpatents

    McKnight, Timothy E; Johnson, Anthony; Moise, Jr., Kenneth J; Ericson, Milton Nance; Baba, Justin S; Wilgen, John B; Evans, III, Boyd McCutchen

    2014-02-25

    Valve implant systems positionable within a flow passage, the systems having an inlet, an outlet, and a remotely activatable valve between the inlet and outlet, with the valves being operable to provide intermittent occlusion of the flow path. A remote field is applied to provide thermal or magnetic activation of the valves.

  14. Microfluidic sieve valves

    SciTech Connect

    Quake, Stephen R; Marcus, Joshua S; Hansen, Carl L

    2015-01-13

    Sieve valves for use in microfluidic device are provided. The valves are useful for impeding the flow of particles, such as chromatography beads or cells, in a microfluidic channel while allowing liquid solution to pass through the valve. The valves find particular use in making microfluidic chromatography modules.

  15. Remote actuated valve implant

    DOEpatents

    McKnight, Timothy E.; Johnson, Anthony; Moise, Kenneth J.; Ericson, Milton Nance; Baba, Justin S.; Wilgen, John B.; Evans, Boyd Mccutchen

    2016-05-10

    Valve implant systems positionable within a flow passage, the systems having an inlet, an outlet, and a remotely activatable valve between the inlet and outlet, with the valves being operable to provide intermittent occlusion of the flow path. A remote field is applied to provide thermal or magnetic activation of the valves.

  16. Liquid rocket valve components

    NASA Technical Reports Server (NTRS)

    1973-01-01

    A monograph on valves for use with liquid rocket propellant engines is presented. The configurations of the various types of valves are described and illustrated. Design criteria and recommended practices for the various valves are explained. Tables of data are included to show the chief features of valve components in use on operational vehicles.

  17. Rotary pneumatic valve

    DOEpatents

    Hardee, Harry C.

    1991-01-01

    A rotary pneumatic valve which is thrust balanced and the pneumatic pressure developed produces only radial loads on the valve cylinder producing negligible resistance and thus minimal torque on the bearings of the valve. The valve is multiplexed such that at least two complete switching cycles occur for each revolution of the cylinder spindle.

  18. Dual stage check valve

    NASA Technical Reports Server (NTRS)

    Whitten, D. E. (Inventor)

    1973-01-01

    A dual stage seat valve head arrangement is described which consists of a primary sealing point located between a fixed orifice seat and a valve poppet, and a secondary sealing point between an orifice poppet and a valve poppet. Upstream of the valve orifice is a flexible, convoluted metal diaphragm attached to the orifice poppet. Downstream of the valve orifice, a finger spring exerts a force against the valve poppet, tending to keep the valve in a closed position. The series arrangement of a double seat and poppet is able to tolerate small particle contamination while minimizing chatter by controlling throttling or metering across the secondary seat, thus preserving the primary sealing surface.

  19. Bellows sealed plug valve

    DOEpatents

    Dukas, Jr., Stephen J.

    1990-01-01

    A bellows sealed plug valve includes a valve body having an inlet passage and an outlet passage, a valve chamber between the inlet and outlet passages. A valve plug has substantially the same shape as the valve chamber and is rotatably disposed therein. A shaft is movable linearly in response to a signal from a valve actuator. A bellows is sealingly disposed between the valve chamber and the valve actuator and means are located between the bellows and the valve plug for converting linear movement of the shaft connected to the valve actuator to rotational movement of the plug. Various means are disclosed including helical thread mechanism, clevis mechanism and rack and pinion mechanism, all for converting linear motion to rotational motion.

  20. Vacuum breaker valve assembly

    DOEpatents

    Thompson, J.L.; Upton, H.A.

    1999-04-27

    Breaker valve assemblies for a simplified boiling water nuclear reactor are described. The breaker valve assembly, in one form, includes a valve body and a breaker valve. The valve body includes an interior chamber, and an inlet passage extends from the chamber and through an inlet opening to facilitate transporting particles from outside of the valve body to the interior chamber. The breaker valve is positioned in the chamber and is configured to substantially seal the inlet opening. Particularly, the breaker valve includes a disk which is sized to cover the inlet opening. The disk is movably coupled to the valve body and is configured to move substantially concentrically with respect to the valve opening between a first position, where the disk completely covers the inlet opening, and a second position, where the disk does not completely cover the inlet opening. 1 fig.

  1. Scissor thrust valve actuator

    DOEpatents

    DeWall, Kevin G.; Watkins, John C; Nitzel, Michael E.

    2006-08-29

    Apparatus for actuating a valve includes a support frame and at least one valve driving linkage arm, one end of which is rotatably connected to a valve stem of the valve and the other end of which is rotatably connected to a screw block. A motor connected to the frame is operatively connected to a motor driven shaft which is in threaded screw driving relationship with the screw block. The motor rotates the motor driven shaft which drives translational movement of the screw block which drives rotatable movement of the valve driving linkage arm which drives translational movement of the valve stem. The valve actuator may further include a sensory control element disposed in operative relationship with the valve stem, the sensory control element being adapted to provide control over the position of the valve stem by at least sensing the travel and/or position of the valve stem.

  2. Vacuum breaker valve assembly

    DOEpatents

    Thompson, Jeffrey L.; Upton, Hubert Allen

    1999-04-27

    Breaker valve assemblies for a simplified boiling water nuclear reactor are described. The breaker valve assembly, in one form, includes a valve body and a breaker valve. The valve body includes an interior chamber, and an inlet passage extends from the chamber and through an inlet opening to facilitate transporting particles from outside of the valve body to the interior chamber. The breaker valve is positioned in the chamber and is configured to substantially seal the inlet opening. Particularly, the breaker valve includes a disk which is sized to cover the inlet opening. The disk is movably coupled to the valve body and is configured to move substantially concentrically with respect to the valve opening between a first position, where the disk completely covers the inlet opening, and a second position, where the disk does not completely cover the inlet opening.

  3. Valve for fluid control

    DOEpatents

    Oborny, Michael C.; Paul, Phillip H.; Hencken, Kenneth R.; Frye-Mason, Gregory C.; Manginell, Ronald P.

    2001-01-01

    A valve for controlling fluid flows. This valve, which includes both an actuation device and a valve body provides: the ability to incorporate both the actuation device and valve into a unitary structure that can be placed onto a microchip, the ability to generate higher actuation pressures and thus control higher fluid pressures than conventional microvalves, and a device that draws only microwatts of power. An electrokinetic pump that converts electric potential to hydraulic force is used to operate, or actuate, the valve.

  4. Spring and valve skirt

    SciTech Connect

    Moore, L.

    1986-07-29

    This patent describes an engine having a valve guide operatively mounting a valve stem and its associated valve spring and spring retainer for actuation of the valve stem by a valve actuator. An improvement is described comprising: a hollow, generally cylindrical shaped skirt means having a side portion forming an interior with one open end and having at its other end an end portion extending inwardly and formed with an axial opening therein communicating to the interior. The skirt means is mounted on and about the valve stem and spring retainer and about its spring so as to move with the valve stem and to cover the spring retainer and most of the portion of the valve spring and the valve stem extending outwardly from the valve guide except for an outermost end of the stem which extends through the opening in the end portion for actuation by the actuator , such that the inwardly extending end portion lies between the outermost end of the stem and an outermost end of the spring retainer to allow for retrofitting insertion of the skirt means over existing valve stems without removal of the spring and spring retainer. Excessive oil is presented from seeping between and valve guide and the valve stem thus preventing excessive carbon build-up in the combustion area, sticking valves, fouled plugs and high exhaust emissions.

  5. 46 CFR 154.801 - Pressure relief systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Pressure relief systems. 154.801 Section 154.801... Vent Systems § 154.801 Pressure relief systems. (a) Each cargo tank that has a volume of 20m3 (706 ft.3) or less must have at least one pressure relief valve. (b) Each cargo tank that has a volume of...

  6. 46 CFR 35.40-18 - Water spray systems-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Water spray systems-TB/ALL. 35.40-18 Section 35.40-18... Requirements-TB/ALL. § 35.40-18 Water spray systems—TB/ALL. (a) Water spray system apparatus shall be marked: “WATER SPRAY SYSTEM,” as appropriate, in not less than 2-inch red letters. (b) The control valve, and...

  7. 46 CFR 38.10-20 - Liquid level gaging devices-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Liquid level gaging devices-TB/ALL. 38.10-20 Section 38.10-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS LIQUEFIED FLAMMABLE GASES Piping, Valves, Fittings, and Accessory Equipment § 38.10-20 Liquid level gaging devices—TB/ALL. (a) Each tank shall be fitted with a liquid...

  8. 46 CFR 95.15-10 - Controls.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Controls. 95.15-10 Section 95.15-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS FIRE PROTECTION EQUIPMENT Carbon Dioxide Extinguishing Systems, Details § 95.15-10 Controls. (a) Except as noted in § 95.15-20(b) all controls and valves for the...

  9. 46 CFR 56.60-10 - Cast iron and malleable iron.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... and malleable iron fittings conforming to the specifications of 46 CFR 56.60-1, Table 56.60-1(a) may...; see 46 CFR 56.01-2) and if their service does not exceed the rating as marked on the valve. (b) Cast... 46 Shipping 2 2011-10-01 2011-10-01 false Cast iron and malleable iron. 56.60-10 Section...

  10. 46 CFR 35.40-17 - Foam hose/monitor stations-T/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Foam hose/monitor stations-T/ALL. 35.40-17 Section 35.40... Requirements-TB/ALL. § 35.40-17 Foam hose/monitor stations—T/ALL. (a) At each required foam hose/monitor valve there shall be marked in not less than 2-inch red letters and figures: “FOAM STATION 1,” 2, 3, etc. (b)...

  11. Quickly Removable Valve

    NASA Technical Reports Server (NTRS)

    Robbins, John S.

    1988-01-01

    Unit removed with minimal disturbance. Valve inlet and outlet ports adjacent to each other on same side of valve body. Ports inserted into special manifold on fluid line. Valve body attached to manifold by four bolts or, alternatively, by toggle clamps. Electromechanical actuator moves in direction parallel to fluid line to open and close valve. When necessary to clean valve, removed simply by opening bolts or toggle clamps. No need to move or separate ports of fluid line. Valve useful where disturbance of fluid line detrimental or where fast maintenance essential - in oil and chemical industries, automotive vehicles, aircraft, and powerplants.

  12. Fast acting check valve

    NASA Technical Reports Server (NTRS)

    Perkins, Gerald S. (Inventor)

    1979-01-01

    A check valve which closes more rapidly to prevent wearing of the valve seat and of the valve member that seals thereagainst, including a solenoid or other actuator that aids the normal spring to quickly close the valve at approximately the time when downpath fluid flow would stop, the actuator then being deenergized. The control circuit that operates the actuator can include a pair of pressure sensors sensing pressure both upstream and downstream from the valve seat. Where the valve is utilized to control flow to or from a piston pump, energization of the actuator can be controlled by sensing when the pump piston reaches its extreme of travel.

  13. Ball valve extractor

    DOEpatents

    Herndon, Charles; Brown, Roger A.

    2002-01-01

    An apparatus and process for removing a ball valve is provided. The ball valve removal tool provides a handle sliding along the length of a shaft. One end of the shaft is secured within an interior cavity of a ball valve while the opposite end of the shaft defines a stop member. By providing a manual sliding force to the handle, the handle impacts the stop member and transmits the force to the ball valve. The direction of the force is along the shaft of the removal tool and disengages the ball valve from the ball valve housing.

  14. Transcatheter aortic valve implantation

    PubMed Central

    Oliemy, Ahmed

    2014-01-01

    Transcatheter aortic valve implantation was developed to offer a therapeutic solution to patients with severe symptomatic aortic stenosis who are not candidates for conventional aortic valve replacement. The improvement in transcatheter aortic valve implantation outcomes is still of concern in the areas of stroke, vascular injury, heart block, paravalvular regurgitation and valve durability. Concomitantly, the progress, both technical and in terms of material advances of transcatheter valve systems, as well as in patient selection, renders transcatheter aortic valve implantation an increasingly viable treatment for more and more patients with structural heart disease. PMID:25374670

  15. Heart valve surgery - series (image)

    MedlinePlus

    ... heart valves are either natural (biologic) or artificial (mechanical). Natural valves are from human donors (cadavers), modified ... artificial valves will require anticoagulation. The advantage of mechanical valves is that they last longer-thus, the ...

  16. Aortic valve surgery - open

    MedlinePlus

    ... There are two main types of new valves: Mechanical, made of man-made materials, such as titanium ... Mechanical heart valves do not fail often. However, blood clots can develop on them. If a blood ...

  17. Mitral valve surgery - open

    MedlinePlus

    ... place. There are two types of mitral valves: Mechanical, made of man-made (synthetic) materials, such as ... Mechanical heart valves do not fail often. They last from 12 to 20 years. However, blood clots ...

  18. Mitral Valve Disease

    MedlinePlus

    ... disease occurs when the mitral valve doesn’t work properly. Types of Mitral Valve Disease Types of ... until you are able to go back to work, depending on your job. Everyday activities such as ...

  19. Mitral valve surgery - open

    MedlinePlus

    ... the rest of your life. Biological, made of human or animal tissue. These valves last 10 to 12 years. ... occur, but this is rare. Valves made from human or animal tissue fail over time, but have a lower ...

  20. Absent pulmonary valve

    MedlinePlus

    ... can occur with absent pulmonary valve include: Abnormal tricuspid valve Atrial septal defect Double outlet right ventricle Ductus arteriosis Endocardial cushion defect Marfan syndrome Tricuspid atresia Heart problems that occur with absent pulmonary ...

  1. Valve Health Monitor (VHM)

    NASA Technical Reports Server (NTRS)

    Perotti, Jose M.; Delgado, H. (Technical Monitor)

    2002-01-01

    This presentation reports on progress being made on developing a Valve Health Monitor (VHM) Smart Current Signature Sensor. Topics cover include: design needs, target valves, current signatures, VHM design approach and VHM status/conclusions.

  2. Pump isolation valve

    DOEpatents

    Kinney, Calvin L.; Wetherill, Todd M.

    1983-08-02

    The pump isolation valve provides a means by which the pump may be selectively isolated from the remainder of the coolant system while being compatible with the internal hydraulic arrangement of the pump during normal operation of the pump. The valve comprises a valve cylinder disposed around the pump and adjacent to the last pump diffuser with a turning vane attached to the lower end of the valve cylinder in a manner so as to hydraulically match with the discharge diffuser. The valve cylinder is connected to a drive means for sliding the valve cylinder relative to the diffuser support cylinder so as to block flow in either direction through the discharge diffuser when the valve is in the closed position and to aid in the flow of the coolant from the discharge diffuser by means of the turning vane when the valve is in the open position.

  3. Absent pulmonary valve

    MedlinePlus

    ... absent pulmonary valve syndrome associated with bronchial obstruction. Ann Thoracic Surg. 2006;82:2221-2226. PMID: 17126138 ... of airway compression in absent pulmonary valve syndrome. Ann Thorac Surg . 2006;81:1802-1807. PMID: 16631676 ...

  4. Aerodynamic Shutoff Valve

    NASA Technical Reports Server (NTRS)

    Horstman, Raymond H.

    1992-01-01

    Aerodynamic flow achieved by adding fixed fairings to butterfly valve. When valve fully open, fairings align with butterfly and reduce wake. Butterfly free to turn, so valve can be closed, while fairings remain fixed. Design reduces turbulence in flow of air in internal suction system. Valve aids in development of improved porous-surface boundary-layer control system to reduce aerodynamic drag. Applications primarily aerospace. System adapted to boundary-layer control on high-speed land vehicles.

  5. Valve technology: A compilation

    NASA Technical Reports Server (NTRS)

    1971-01-01

    A technical compilation on the types, applications and modifications to certain valves is presented. Data cover the following: (1) valves that feature automatic response to stimuli (thermal, electrical, fluid pressure, etc.), (2) modified valves changed by redesign of components to increase initial design effectiveness or give the item versatility beyond its basic design capability, and (3) special purpose valves with limited application as presented, but lending themselves to other uses with minor changes.

  6. Stemless Ball Valve

    NASA Technical Reports Server (NTRS)

    Burgess, Robert K.; Yakos, David; Walthall, Bryan

    2012-01-01

    This invention utilizes a new method of opening and closing a ball valve. Instead of rotating the ball with a perpendicular stem (as is the case with standard ball valves), the ball is rotated around a fixed axis by two guide pins. This innovation eliminates the leak point that is present in all standard ball valves due to the penetration of an actuation stem through the valve body. The VOST (Venturi Off-Set-Technology) valve has been developed for commercial applications. The standard version of the valve consists of an off-set venturi flow path through the valve. This path is split at the narrowest portion of the venturi, allowing the section upstream from the venturi to be rotated. As this rotation takes place, the venturi becomes restricted as one face rotates with respect to the other, eventually closing off the flow path. A spring-loaded seal made of resilient material is embedded in the upstream face of the valve, making a leak-proof seal between the faces; thus a valve is formed. The spring-loaded lip seal is the only seal that can provide a class six, or bubble-tight, seal against the opposite face of the valve. Tearing action of the seal by high-velocity gas on this early design required relocation of the seal to the downstream face of the valve. In the stemless embodiment of this valve, inner and outer magnetic cartridges are employed to transfer mechanical torque from the outside of the valve to the inside without the use of a stem. This eliminates the leak path caused by the valve stems in standard valves because the stems penetrate through the bodies of these valves.

  7. Overflow control valve

    DOEpatents

    Hundal, Rolv; Kessinger, Boyd A.; Parlak, Edward A.

    1984-07-24

    An overflow control valve for use in a liquid sodium coolant pump tank which valve can be extended to create a seal with the pump tank wall or retracted to break the seal thereby accommodating valve removal. An actuating shaft which controls valve disc position also has cams which bear on roller surfaces to force retraction of a sliding cylinder against spring tension to retract the cylinder from sealing contact with the pump tank.

  8. Burst diaphragm sequence valve

    NASA Astrophysics Data System (ADS)

    Wisneskie, Bradley D.; Hyman, Sheldon; Hallum, Charles E.

    1991-11-01

    A burst diaphragm sequence valve which effectively combines the structure of a burst diaphragm with that of an ordinary swing check valve, the pivot of the ordinary swing check valve being replaced by an integral flexural hinge. The sequence valve provides a way to sequentially burn solid propellant hot gas generators which exit into a common gas manifold, thereby enabling gas-powered devices to operate for a longer time than the duration of one gas generator burn.

  9. Dump valve assembly

    DOEpatents

    Owen, T.J.

    1984-01-01

    A dump valve assembly comprising a body having a bore defined by a tapered wall and a truncated spherical valve member adapted to seat along a spherical surface portion thereof against said tapered wall. Means are provided for pivoting said valve member between a closed position engagable with said tapered wall and an open position disengaged therefrom.

  10. Heart Valve Diseases

    MedlinePlus

    Your heart has four valves. Normally, these valves open to let blood flow through or out of your heart, and then shut to keep it from flowing ... close tightly. It's one of the most common heart valve conditions. Sometimes it causes regurgitation. Stenosis - when ...

  11. Fuel distribution valve

    SciTech Connect

    Halvorsen, R.M.; Hurst, J.B.

    1986-09-30

    This patent describes a fuel flow distribution valve for dividing and metering fuel flow from a fuel source to nozzles for supplying fuel to an engine comprising valve body means having an inlet and outlets, intermediate liner means forming a longitudinal valve bore in the valve body means. The intermediate liner means has a reference surface thereon, a valve slidably supported in the valve bore slidable longitudinally therein and having a close tolerance diametral fit therewith. The valve has a positioning surface engageable with the reference surface and movable to a spaced apart position therefrom, spring means for biasing the valve in a first direction with respect to the liner means to engage the positioning surface and reference surface. The valve also has a means for directing inlet pressure against the valve in opposition to the spring means, pairs of in line-machined flow metering ports in the liner means and value with the ports in each pair being congruent by virtue of being machined simultaneously with a common tool in the liner means and the valve when the valve is in a fixed position in the bore with the positioning surface spaced a preselected longitudinal distance from the reference surface to define spaced pairs of congruent flow metering ports.

  12. Lock For Valve Stem

    NASA Technical Reports Server (NTRS)

    Burley, Richard K.; Guirguis, Kamal S.

    1991-01-01

    Simple, cheap device locks valve stem so its setting cannot be changed by unauthorized people. Device covers valve stem; cover locked in place with standard padlock. Valve lock made of PVC pipe and packing band. Shears, drill or punch, and forming rod only tools needed.

  13. Liquid rocket valve assemblies

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The design and operating characteristics of valve assemblies used in liquid propellant rocket engines are discussed. The subjects considered are as follows: (1) valve selection parameters, (2) major design aspects, (3) design integration of valve subassemblies, and (4) assembly of components and functional tests. Information is provided on engine, stage, and spacecraft checkout procedures.

  14. Microblower assisted barometric valve

    DOEpatents

    Rossabi, Joseph; Hyde, Warren K.; Riha, Brian D.; Jackson, Dennis G.; Sappington, Frank

    2005-12-06

    A gas exchange apparatus is provided which provides for both passive fluid flow and blower associated fluid flow through a barometric valve. A battery powered blower is provided which allows for operation of the barometric valve during times when the barometric valve would otherwise be closed, and provides for enhanced volume of gas exchange.

  15. Thermally actuated valve

    NASA Technical Reports Server (NTRS)

    Silver, R. H.

    1973-01-01

    Effective seal in one-shot valve is made by shrink-fitting ball within cylinder; thermal expansion of cylinder, caused by contiguous source of heat, will release ball and open valve. Valve can also be adapted for repeated operation and made capable of being opened without pressurized fluid.

  16. Compact valve actuation mechanism

    NASA Technical Reports Server (NTRS)

    Brogdon, James William (Inventor); Gill, David Keith (Inventor)

    2000-01-01

    A valve actuation device. The device may include a free floating valve bridge movably supported within a cavity in the engine housing. The bridge may be provided with a cavity and an orifice arrangement for pumping gases entrained with lubricating fluid toward the piston stems as the bridge reciprocates back and forth. The device may also include a rocker arm that has a U-shaped cross-sectional shape for receiving at least a portion of the valve bridge, valve stem valve spring and spring retainer therein. The rocker arm may be provided with lubrication passages for directing lubrication to the point wherein it is pivotally affixed to the engine housing.

  17. Minimally Invasive Valve Surgery

    PubMed Central

    Pope, Nicolas H.; Ailawadi, Gorav

    2014-01-01

    Cardiac valve surgery is life saving for many patients. The advent of minimally invasive surgical techniques has historically allowed for improvement in both post-operative convalescence and important clinical outcomes. The development of minimally invasive cardiac valve repair and replacement surgery over the past decade is poised to revolutionize the care of cardiac valve patients. Here, we present a review of the history and current trends in minimally invasive aortic and mitral valve repair and replacement, including the development of sutureless bioprosthetic valves. PMID:24797148

  18. 46 CFR 153.368 - Pressure-vacuum valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Pressure-vacuum valves. 153.368 Section 153.368 Shipping... Systems § 153.368 Pressure-vacuum valves. (a) The pressure side of a required pressure-vacuum relief valve must begin to open only at a pressure exceeding 3.5 kPa gauge (approx. 0.5 psig). (b) A...

  19. 46 CFR 153.368 - Pressure-vacuum valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Pressure-vacuum valves. 153.368 Section 153.368 Shipping... Systems § 153.368 Pressure-vacuum valves. (a) The pressure side of a required pressure-vacuum relief valve must begin to open only at a pressure exceeding 3.5 kPa gauge (approx. 0.5 psig). (b) A...

  20. 46 CFR 153.368 - Pressure-vacuum valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Pressure-vacuum valves. 153.368 Section 153.368 Shipping... Systems § 153.368 Pressure-vacuum valves. (a) The pressure side of a required pressure-vacuum relief valve must begin to open only at a pressure exceeding 3.5 kPa gauge (approx. 0.5 psig). (b) A...

  1. 46 CFR 56.20-20 - Valve bypasses.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Valves § 56.20-20 Valve bypasses. (a) Sizes of bypasses shall be in accordance with MSS SP-45 (incorporated by reference; see 46 CFR 56.01-2). (b) Pipe for bypasses should be at least Schedule 80 seamless... 46 Shipping 2 2014-10-01 2014-10-01 false Valve bypasses. 56.20-20 Section 56.20-20 Shipping...

  2. 46 CFR 56.20-20 - Valve bypasses.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Valves § 56.20-20 Valve bypasses. (a) Sizes of bypasses shall be in accordance with MSS SP-45 (incorporated by reference; see 46 CFR 56.01-2). (b) Pipe for bypasses should be at least Schedule 80 seamless... 46 Shipping 2 2012-10-01 2012-10-01 false Valve bypasses. 56.20-20 Section 56.20-20 Shipping...

  3. 46 CFR 56.20-20 - Valve bypasses.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Valves § 56.20-20 Valve bypasses. (a) Sizes of bypasses shall be in accordance with MSS SP-45 (incorporated by reference; see 46 CFR 56.01-2). (b) Pipe for bypasses should be at least Schedule 80 seamless... 46 Shipping 2 2013-10-01 2013-10-01 false Valve bypasses. 56.20-20 Section 56.20-20 Shipping...

  4. 46 CFR 153.368 - Pressure-vacuum valves.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Pressure-vacuum valves. 153.368 Section 153.368 Shipping... Systems § 153.368 Pressure-vacuum valves. (a) The pressure side of a required pressure-vacuum relief valve must begin to open only at a pressure exceeding 3.5 kPa gauge (approx. 0.5 psig). (b) A...

  5. Challenges in valve-in-valve therapy.

    PubMed

    Noorani, Alia; Radia, Rahee; Bapat, Vinayak

    2015-09-01

    At present, the majority of surgical heart valves (SHVs) implanted are bioprosthetic valves. Over time however, these are prone to structural deterioration, which may manifest as valvular stenosis, regurgitation or a combination of the two. Re-operation is the current standard of care for these patients but this itself carries a significant risk of mortality and morbidity. As a natural extension of transcatheter aortic valve implantation (TAVI), now an evidence based solution for severe aortic stenosis in high-risk patients, valve-in-valve (VIV) therapy is evolving into an alternative option in selected patients with structural biological valvular deterioration in all four-valve positions. The first of these VIV procedures was performed in Germany in 2007, for failing aortic valve prosthesis and later, reported in other positions. As with any novel emerging therapy, there is a learning curve to the procedure and the operator must be aware of the potential challenges. In this review we describe some of these challenges with the aim of providing awareness as well as guidance on attaining a successful outcome. PMID:26543595

  6. Challenges in valve-in-valve therapy

    PubMed Central

    Noorani, Alia; Radia, Rahee

    2015-01-01

    At present, the majority of surgical heart valves (SHVs) implanted are bioprosthetic valves. Over time however, these are prone to structural deterioration, which may manifest as valvular stenosis, regurgitation or a combination of the two. Re-operation is the current standard of care for these patients but this itself carries a significant risk of mortality and morbidity. As a natural extension of transcatheter aortic valve implantation (TAVI), now an evidence based solution for severe aortic stenosis in high-risk patients, valve-in-valve (VIV) therapy is evolving into an alternative option in selected patients with structural biological valvular deterioration in all four-valve positions. The first of these VIV procedures was performed in Germany in 2007, for failing aortic valve prosthesis and later, reported in other positions. As with any novel emerging therapy, there is a learning curve to the procedure and the operator must be aware of the potential challenges. In this review we describe some of these challenges with the aim of providing awareness as well as guidance on attaining a successful outcome. PMID:26543595

  7. Main Oxidizer Valve Design

    NASA Technical Reports Server (NTRS)

    Addona, Brad; Eddleman, David

    2015-01-01

    A developmental Main Oxidizer Valve (MOV) was designed by NASA-MSFC using additive manufacturing processes. The MOV is a pneumatically actuated poppet valve to control the flow of liquid oxygen to an engine's injector. A compression spring is used to return the valve to the closed state when pneumatic pressure is removed from the valve. The valve internal parts are cylindrical in shape, which lends itself to traditional lathe and milling operations. However, the valve body represents a complicated shape and contains the majority of the mass of the valve. Additive manufacturing techniques were used to produce a part that optimized mass and allowed for design features not practical with traditional machining processes.

  8. Schizotypy and false memory.

    PubMed

    Dagnall, Neil; Parker, Andrew

    2009-03-01

    Using the Deese-Roediger-McDermott (DRM) paradigm the present study examined the relationship between schizotypy and recognition memory. Participants scoring in the upper and lower quartile ranges for schizotypy (Schizotypal Personality Questionnaire brief version; SPQ-B) and on each of the SPQ-B subscales (cognitive-perceptual, interpersonal and disorganized) were compared on true and false memory performance. Participants scoring in the lower quartile range on the cognitive-perceptual subscale recognised a higher proportion of both true and false memories than those scoring in the higher quartile range. Participants scoring in the upper quartile on the interpersonal factor recognised fewer true items than those in the lower quartile range. No differences were found for overall schizotypy or on the disorganized subscale. PMID:18817907

  9. CAM operated fuel valve

    SciTech Connect

    Kelly, S.T.; Katchka, J.R.

    1991-09-03

    This patent describes improvement in a fuel control valve construction comprising a housing means having an inlet means adapted to be interconnected to a fuel source and a main outlet means adapted to be interconnected to a main burner means, the housing means having a main valve seat for interconnecting the inlet means with the main outlet means, the housing means having a movable main valve member for opening and closing the main valve seat, the housing means having a movable lever operatively associated with the main valve member and having a manually operable actuator means for controlling the operating positions of the lever, the lever having an intermediate cam follower portion and opposed ends disposed on each side of the cam follower portion with one end of the opposed ends being pivotally mounted to the housing means and with the other end of the opposed ends for operating the main valve member, the housing means having biasing means operatively interconnected to the lever to tend to pivot the lever in one direction that opens the main valve member away from its the main valve seat. The improvement comprises; the housing means has a thermostatically controlled means that is operatively associated with the lever and is adapted to engage and hold the lever in a position wherein the main valve member is in a closed condition against its the main valve seat when the thermostatically controlled means is in one operating condition thereof and the actuator means is in the on condition thereof.

  10. 49 CFR 229.47 - Emergency brake valve.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Emergency brake valve. 229.47 Section 229.47..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Brake System § 229.47 Emergency brake valve. (a) Except for locomotives with cabs designed for occupancy by only one person,...

  11. 46 CFR 185.608 - Fuel shutoff valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Fuel shutoff valves. 185.608 Section 185.608 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.608 Fuel shutoff valves. Remote fuel shutoff stations must be marked...

  12. 46 CFR 185.608 - Fuel shutoff valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Fuel shutoff valves. 185.608 Section 185.608 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.608 Fuel shutoff valves. Remote fuel shutoff stations must be marked...

  13. 46 CFR 169.746 - Fuel shutoff valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Fuel shutoff valves. 169.746 Section 169.746 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.746 Fuel shutoff valves. Each remote...

  14. 46 CFR 169.746 - Fuel shutoff valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Fuel shutoff valves. 169.746 Section 169.746 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.746 Fuel shutoff valves. Each remote...

  15. 46 CFR 185.608 - Fuel shutoff valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Fuel shutoff valves. 185.608 Section 185.608 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.608 Fuel shutoff valves. Remote fuel shutoff stations must be marked...

  16. 14 CFR 23.995 - Fuel valves and controls.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Fuel valves and controls. 23.995 Section 23... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Powerplant Fuel System Components § 23.995 Fuel valves and controls. (a) There must be a means to allow appropriate flight...

  17. 46 CFR 169.746 - Fuel shutoff valves.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Fuel shutoff valves. 169.746 Section 169.746 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.746 Fuel shutoff valves. Each remote...

  18. 21 CFR 868.1965 - Switching valve (ploss).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Switching valve (ploss). 868.1965 Section 868.1965 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1965 Switching valve (ploss)....

  19. 21 CFR 868.1965 - Switching valve (ploss).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Switching valve (ploss). 868.1965 Section 868.1965 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1965 Switching valve (ploss)....

  20. 46 CFR 109.333 - Fire main cutoff valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Fire main cutoff valves. 109.333 Section 109.333 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS... in charge shall insure that each fire main cutoff valve is open and sealed to prevent closing,...