Science.gov

Sample records for 232-6348 contact cdc-info

  1. Contact Dermatitis

    MedlinePlus

    ... care Kids’ zone Video library Find a dermatologist Contact dermatitis Overview Contact dermatitis: Many health care workers ... to touching her face while wearing latex gloves. Contact dermatitis: Overview Almost everyone gets this type of ...

  2. Language Contact.

    ERIC Educational Resources Information Center

    Nelde, Peter Hans

    1995-01-01

    Examines the phenomenon of language contact and recent trends in linguistic contact research, which focuses on language use, language users, and language spheres. Also discusses the role of linguistic and cultural conflicts in language contact situations. (13 references) (MDM)

  3. Contact hysteroscopy.

    PubMed

    Baggish, M S; Barbot, J

    1983-06-01

    In 1907 innovations in optics and illumination made by Maximilian Nitze were applied to hysteroscopy by Charles David, who wrote a treatise of hysteroscopy. David improved illumination by placing an electric incandescent bulb at the intrauterine end of his endoscope and also sealed the distal end of the tube with a piece of glass. The history of the contact endoscope that the authors personally used is connected to the invention by Vulmiere (1952) of a revolutionary illumination process in endoscopy--the "cold light" process. The components of cold light consist of a powerful external light source that is transmitted via a special optical guide into the endometrial cavity. The 1st application of his principle (1963) was an optical trochar contained in a metallic sheath. This simple endoscope was perfected, and in 1973 Barbot and Parent, in France, began to use it to examine the uterine cavity. Discussion focuses on methods, instrumentation, method for examination (grasping the instrument, setup, light source, anesthesia, dilatation, technique, and normal endometrium); cervical neoplasia; nonneoplastic lesions of the endometrium (endometrial polyp, submucous myoma, endometrial hyperplasia); intrauterine device localization; neoplastic lesions of the endometrium; precursors (adenocarcinoma); hysteroscopy in pregnancy (embryoscopy, hydatidiform mole, postpartum hemorrhage, incomplete abortion, spontaneous abortion, induced abortions, and amnioscopy); and examinations of children and infants. The contact endoscope must make light contact with the structure to be viewed. The principles of contact endoscopy depend on an interpretation of color, contour, vascular pattern, and a sense of touch. These are computed together and a diagnosis is made on the basis of previously learned clinical pathologic correlations. The contact endoscope is composed of 3 parts: an optical guide; a cylindric chamber that collects and traps ambient light; and a magnifying eyepiece. The phase of

  4. Types of Contact Lenses

    MedlinePlus

    ... Consumer Devices Consumer Products Contact Lenses Types of Contact Lenses Share Tweet Linkedin Pin it More sharing ... Orthokeratology (Ortho-K) Decorative (Plano) Contact Lenses Soft Contact Lenses Soft contact lenses are made of soft, ...

  5. Prioritized Contact Transport Stream

    NASA Technical Reports Server (NTRS)

    Hunt, Walter Lee, Jr. (Inventor)

    2015-01-01

    A detection process, contact recognition process, classification process, and identification process are applied to raw sensor data to produce an identified contact record set containing one or more identified contact records. A prioritization process is applied to the identified contact record set to assign a contact priority to each contact record in the identified contact record set. Data are removed from the contact records in the identified contact record set based on the contact priorities assigned to those contact records. A first contact stream is produced from the resulting contact records. The first contact stream is streamed in a contact transport stream. The contact transport stream may include and stream additional contact streams. The contact transport stream may be varied dynamically over time based on parameters such as available bandwidth, contact priority, presence/absence of contacts, system state, and configuration parameters.

  6. EDITORIAL: Close contact Close contact

    NASA Astrophysics Data System (ADS)

    Demming, Anna

    2010-07-01

    The development of scanning probe techniques, such as scanning tunnelling microscopy [1], has often been touted as the catalyst for the surge in activity and progress in nanoscale science and technology. Images of nanoscale structural detail have served as an invaluable investigative resource and continue to fascinate with the fantastical reality of an intricate nether world existing all around us, but hidden from view of the naked eye by a disparity in scale. As is so often the case, the invention of the scanning tunnelling microscope heralded far more than just a useful new apparatus, it demonstrated the scope for exploiting the subtleties of electronic contact. The shrinking of electronic devices has been a driving force for research into molecular electronics, in which an understanding of the nature of electronic contact at junctions is crucial. In response, the number of experimental techniques in molecular electronics has increased rapidly in recent years. Scanning tunnelling microscopes have been used to study electron transfer through molecular films on a conducting substrate, and the need to monitor the contact force of scanning tunnelling electrodes led to the use of atomic force microscopy probes coated in a conducting layer as studied by Cui and colleagues in Arizona [2]. In this issue a collaboration of researchers at Delft University and Leiden University in the Netherlands report a new device architecture for the independent mechanical and electrostatic tuning of nanoscale charge transport, which will enable thorough studies of molecular transport in the future [3]. Scanning probes can also be used to pattern surfaces, such as through spatially-localized Suzuki and Heck reactions in chemical scanning probe lithography. Mechanistic aspects of spatially confined Suzuki and Heck chemistry are also reported in this issue by researchers in Oxford [4]. All these developments in molecular electronics fabrication and characterization provide alternative

  7. Irritant Contact Dermatitis

    MedlinePlus

    ... and rashes clinical tools newsletter | contact Share | Irritant Contact Dermatitis Information for adults A A A This ... severe involvement in the patient's armpit. Overview Irritant contact dermatitis is an inflammatory rash caused by direct ...

  8. Contact Lens Risks

    MedlinePlus

    ... Health and Consumer Devices Consumer Products Contact Lenses Contact Lens Risks Share Tweet Linkedin Pin it More ... redness blurred vision swelling pain Serious Hazards of Contact Lenses Symptoms of eye irritation can indicate a ...

  9. Contact Lens Care

    MedlinePlus

    ... For Consumers Consumer Information by Audience For Women Contact Lens Care Share Tweet Linkedin Pin it More ... 1088, www.fda.gov/medwatch Learn More about Contact Lens Care Other Tips on Contact Lenses Decorative ...

  10. Contact Lens Solution Toxicity

    MedlinePlus

    ... rash and rashes clinical tools newsletter | contact Share | Contact Lens Solution Toxicity Information for adults A A A This image shows a reaction to contact lens solution. The prominent blood vessels and redness ...

  11. Contact Dermatitis in Pediatrics.

    PubMed

    Pelletier, Janice L; Perez, Caroline; Jacob, Sharon E

    2016-08-01

    Contact dermatitis is an umbrella term that describes the skin's reaction to contacted noxious or allergenic substances. The two main categories of contact dermatitis are irritant type and allergic type. This review discusses the signs, symptoms, causes, and complications of contact dermatitis. It addresses the testing, treatment, and prevention of contact dermatitis. Proper management of contact dermatitis includes avoidance measures for susceptible children. Implementation of a nickel directive (regulating the use of nickel in jewelry and other products that come into contact with the skin) could further reduce exposure to the most common allergens in the pediatric population. [Pediatr Ann. 2016;45(8):e287-e292.]. PMID:27517356

  12. Contact reactions to food.

    PubMed

    Killig, Claudia; Werfel, Thomas

    2008-05-01

    Cutaneous adverse reactions to foods, spices, and food additives can occur both in occupational and nonoccupational settings in those who grow, handle, prepare, or cook food. Because spices are also utilized in cosmetics and perfumes, other exposures are encountered that can result in adverse cutaneous reactions. This article describes the reaction patterns that can occur upon contact with foods, including irritant contact dermatitis and allergic contact dermatitis. The ingestion of culprit foods by sensitized individuals can provoke a generalized eczematous rash, referred to as systemic contact dermatitis. Other contact reactions to food include contact urticaria and protein contact dermatitis provoked by high-molecular-weight food proteins often encountered in patients with atopic dermatitis. Phototoxic and photoallergic contact dermatitis are also considered.

  13. Allergic Contact Dermatitis

    MedlinePlus

    ... causes of allergic contact dermatitis include nickel, chromates, rubber chemicals, and topical antibiotic ointments and creams. Frequent ... construction workers who are in contact with cement. Rubber chemicals are found in gloves, balloons, elastic in ...

  14. Colored Contact Lens Dangers

    MedlinePlus

    ... Halloween Hazard: The Hidden Dangers of Buying Decorative Contact Lenses Without a Prescription Sep. 26, 2013 It ... the truth." Real People, Real Problems with Colored Contact Lenses Julian: Teenager Blinded In One Eye By ...

  15. Contact solution algorithms

    NASA Technical Reports Server (NTRS)

    Tielking, John T.

    1989-01-01

    Two algorithms for obtaining static contact solutions are described in this presentation. Although they were derived for contact problems involving specific structures (a tire and a solid rubber cylinder), they are sufficiently general to be applied to other shell-of-revolution and solid-body contact problems. The shell-of-revolution contact algorithm is a method of obtaining a point load influence coefficient matrix for the portion of shell surface that is expected to carry a contact load. If the shell is sufficiently linear with respect to contact loading, a single influence coefficient matrix can be used to obtain a good approximation of the contact pressure distribution. Otherwise, the matrix will be updated to reflect nonlinear load-deflection behavior. The solid-body contact algorithm utilizes a Lagrange multiplier to include the contact constraint in a potential energy functional. The solution is found by applying the principle of minimum potential energy. The Lagrange multiplier is identified as the contact load resultant for a specific deflection. At present, only frictionless contact solutions have been obtained with these algorithms. A sliding tread element has been developed to calculate friction shear force in the contact region of the rolling shell-of-revolution tire model.

  16. Glasses and Contact Lenses

    MedlinePlus

    ... Here's Help White House Lunch Recipes Glasses and Contact Lenses KidsHealth > For Kids > Glasses and Contact Lenses Print A A A Text Size What's ... together the way they should. But eyeglasses or contact lenses, also called corrective lenses, can help most ...

  17. CONTACT URTICARIA: PRESENT SCENARIO

    PubMed Central

    Bhatia, Ruchi; Alikhan, Ali; Maibach, Howard I

    2009-01-01

    Immunological contact urticaria is a hypersensitivity reaction that appears on the skin following contact with an eliciting substance. Recent advances in our understanding of the molecular mechanism and pathogenesis of this reaction have altered its classification, diagnosis, and treatment. We discuss classification, epidemiology, diagnosis, testing, and treatment options that are available to patients with contact urticaria. PMID:20161861

  18. Contact lens in keratoconus

    PubMed Central

    Rathi, Varsha M; Mandathara, Preeji S; Dumpati, Srikanth

    2013-01-01

    Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP) lenses, soft and soft toric lenses, piggy back contact lenses (PBCL), hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the English language with the keywords keratoconus and various contact lenses such as Rose k lens, RGP lens, hybrid lens, scleral lens and PBCL. PMID:23925325

  19. Non-contact measurement of contact wire

    NASA Astrophysics Data System (ADS)

    Yi, Yaxing; Ye, Xuemei; Li, Zhongke; Yue, Kaiduan

    2008-12-01

    The overhead contact system is the power supply unit of the electric locomotive. This article is to introduce our newly developed method to measure the height and pull out value of the contact wire. A carema dolly which can move on railway is applied to bear the weight of the measure equipment; two linear CCD cameras are installed on the dolly symmetrically about the midline of two rails. While the dolly move along the railway, two CCD cameras grasp the image synchronously, and a computer real-time process the images, the height and pull out value can be calculate out from the images.

  20. [Contact dermatitis in Dakar].

    PubMed

    Niang, S O

    2007-01-01

    Because of the widespread repartition of allergens, allergic contact dermatitis is the most common inflammatory skin disease. It's the best model of dilated hypersensibility mediated by T lymphocytes cells. Atopic dermatitis and irritative dermatitis are to be distinguished to contact dermatitis. The aetiological diagnosis is the most important step of management of patients with that disease because it's the best way to avoid recurrences. The identification of cause is based on aetiological interrogatory and epicutaneous tests with 23 allergens completed with personnel products and specialised tests. Contact dermatitis can be classified according to results of aetiological management. In occupational contact dermatitis, contact dermatitis due to drugs, to metals, cosmetics, clothes and accessory and proteins. Management of patients with contact dermatitis is based on individual eviction, protection, cosmetovigilance, declaration of occupational dermatosis and allergovigilance. PMID:19102084

  1. Optical contact micrometer

    SciTech Connect

    Jacobson, Steven D.

    2014-08-19

    Certain examples provide optical contact micrometers and methods of use. An example optical contact micrometer includes a pair of opposable lenses to receive an object and immobilize the object in a position. The example optical contact micrometer includes a pair of opposable mirrors positioned with respect to the pair of lenses to facilitate viewing of the object through the lenses. The example optical contact micrometer includes a microscope to facilitate viewing of the object through the lenses via the mirrors; and an interferometer to obtain one or more measurements of the object.

  2. Language Contact: An Introduction.

    ERIC Educational Resources Information Center

    Thomason, Sarah G.

    This book surveys situations in which language contact arises and focuses on what happens to the languages themselves: sometimes nothing, sometimes the incorporation of new words, sometimes the spread of new sounds and sentence structures across many languages and wide swathes of territory. It outlines the origins and results of contact-induced…

  3. Noneczematous Contact Dermatitis

    PubMed Central

    Foti, Caterina; Vestita, Michelangelo; Angelini, Gianni

    2013-01-01

    Irritant or allergic contact dermatitis usually presents as an eczematous process, clinically characterized by erythematoedematovesicous lesions with intense itching in the acute phase. Such manifestations become erythematous-scaly as the condition progresses to the subacute phase and papular-hyperkeratotic in the chronic phase. Not infrequently, however, contact dermatitis presents with noneczematous features. The reasons underlying this clinical polymorphism lie in the different noxae and contact modalities, as well as in the individual susceptibility and the various targeted cutaneous structures. The most represented forms of non-eczematous contact dermatitis include the erythema multiforme-like, the purpuric, the lichenoid, and the pigmented kinds. These clinical entities must obviously be discerned from the corresponding “pure” dermatitis, which are not associated with contact with exogenous agents. PMID:24109520

  4. Contact dermatitis in athletes.

    PubMed

    Kockentiet, Brett; Adams, Brian B

    2007-06-01

    Athletes face numerous hazards in their daily activities. An athlete's skin, in particular, endures repeated exposure to trauma, heat, moisture, and numerous allergens and chemicals. These factors combine with other unique and less well-defined genetically predisposing factors in the athlete's skin to cause both allergic contact dermatitis (ACD) and irritant contact dermatitis (ICD). As with other cases of contact dermatitis, these eruptions in athletes present as a spectrum of acute to subacute to chronic dermatitis. Recognizing the unique environmental irritants and allergens encountered by athletes is paramount to facilitate appropriate therapy and prevention. This review comprehensively examines the literature on contact dermatitis in athletes. The different types of contact dermatitis have been classified under sport-specific subheadings. Furthermore, within each subheading, both ACD and ICD types are discussed.

  5. Allergic contact dermatitis.

    PubMed

    Becker, Detlef

    2013-07-01

    Allergic contact dermatitis is a frequent inflammatory skin disease. The suspected diagnosis is based on clinical symptoms, a plausible contact to allergens and a suitable history of dermatitis. Differential diagnoses should be considered only after careful exclusion of any causal contact sensitization. Hence, careful diagnosis by patch testing is of great importance. Modifications of the standardized test procedure are the strip patch test and the repeated open application test. The interpretation of the SLS (sodium lauryl sulfate) patch test as well as testing with the patients' own products and working materials are potential sources of error. Accurate patch test reading is affected in particular by the experience and individual factors of the examiner. Therefore, a high degree of standardization and continuous quality control is necessary and may be supported by use of an online patch test reading course made available by the German Contact Dermatitis Research Group. A critical relevance assessment of allergic patch test reactions helps to avoid relapses and the consideration of differential diagnoses. Any allergic test reaction should be documented in an allergy ID card including the INCI name, if appropriate. The diagnostics of allergic contact dermatitis is endangered by a seriously reduced financing of patch testing by the German statutory health insurances. Restrictive regulations by the German Drug Law block the approval of new contact allergens for routine patch testing. Beside the consistent avoidance of allergen contact, temporary use of systemic and topical corticosteroids is the therapy of first choice.

  6. Telescopic vision contact lens

    NASA Astrophysics Data System (ADS)

    Tremblay, Eric J.; Beer, R. Dirk; Arianpour, Ashkan; Ford, Joseph E.

    2011-03-01

    We present the concept, optical design, and first proof of principle experimental results for a telescopic contact lens intended to become a visual aid for age-related macular degeneration (AMD), providing magnification to the user without surgery or external head-mounted optics. Our contact lens optical system can provide a combination of telescopic and non-magnified vision through two independent optical paths through the contact lens. The magnified optical path incorporates a telescopic arrangement of positive and negative annular concentric reflectors to achieve 2.8x - 3x magnification on the eye, while light passing through a central clear aperture provides unmagnified vision.

  7. Optical contacting of quartz

    NASA Technical Reports Server (NTRS)

    Payne, L. L.

    1982-01-01

    The strength of the bond between optically contacted quartz surfaces was investigated. The Gravity Probe-B (GP-B) experiment to test the theories of general relativity requires extremely precise measurements. The quartz components of the instruments to make these measurements must be held together in a very stable unit. Optical contacting is suggested as a possible method of joining these components. The fundamental forces involved in optical contacting are reviewed and relates calculations of these forces to the results obtained in experiments.

  8. Fragrance allergic contact dermatitis.

    PubMed

    Cheng, Judy; Zug, Kathryn A

    2014-01-01

    Fragrances are a common cause of allergic contact dermatitis in Europe and in North America. They can affect individuals at any age and elicit a spectrum of reactions from contact urticaria to systemic contact dermatitis. Growing recognition of the widespread use of fragrances in modern society has fueled attempts to prevent sensitization through improved allergen identification, labeling, and consumer education. This review provides an overview and update on fragrance allergy. Part 1 discusses the epidemiology and evaluation of suspected fragrance allergy. Part 2 reviews screening methods, emerging fragrance allergens, and management of patients with fragrance contact allergy. This review concludes by examining recent legislation on fragrances and suggesting potential additions to screening series to help prevent and detect fragrance allergy.

  9. Occupational Contact Dermatitis

    PubMed Central

    2008-01-01

    Occupational contact dermatitis accounts for 90% of all cases of work-related cutaneous disorders. It can be divided into irritant contact dermatitis, which occurs in 80% of cases, and allergic contact dermatitis. In most cases, both types will present as eczematous lesions on exposed parts of the body, notably the hands. Accurate diagnosis relies on meticulous history taking, thorough physical examination, careful reading of Material Safety Data Sheets to distinguish between irritants and allergens, and comprehensive patch testing to confirm or rule out allergic sensitization. This article reviews the pathogenesis and clinical manifestations of occupational contact dermatitis and provides diagnostic guidelines and a rational approach to management of these often frustrating cases. PMID:20525126

  10. Contacting American Overseas Schools.

    ERIC Educational Resources Information Center

    Engelhardt, David

    1993-01-01

    Provides contacts for architects or educational consultants who wish to work overseas. Cites a directory, newsletters, newspapers, and associations focused on educators involved with independent overseas schools that are organized around the United States curriculum. (MLF)

  11. Relay contact monitoring system

    SciTech Connect

    Mehta, V.

    1994-01-11

    A switching system for switching on and off heating and air conditioning units in an environmental control system. The switching system includes a thermostat and a relay conductively coupled to the thermostat. The relay has a contact, which is responsive to a change signal for changing its position. The system further includes a programmable monitor having predetermined positions stored in a memory. The monitor is conductively coupled to the contact and to the thermostat for continually determining the position of the contact, and for sending a change signal to the relay for switching the position of the contact, as needed, to be in conformance with a predetermined position stored in the memory. 3 figs.

  12. The impact of contact

    NASA Astrophysics Data System (ADS)

    Finney, B.

    1986-10-01

    Scenarios of the impact on human society of radio contact with an extraterrestrial civilization are presented. Some believe that contact with advanced extraterrestrials would quickly devastate the human spirit, while others believe that these super-intelligent beings would show the inhabitants of the earth how to live in peace. It is proposed that the possible existence of extraterrestrial civilizations and the development of means of studying and communicating with them need to be considered.

  13. ELECTRIC CONTACT MEANS

    DOEpatents

    Grear, J.W. Jr.

    1959-03-10

    A switch adapted to maintain electrical connections under conditions of vibration or acceleration is described. According to the invention, thc switch includes a rotatable arm carrying a conductive bar arranged to close against two contacts spaced in the same plane. The firm and continuous engagement of the conductive bar with the contacts is acheived by utilizeing a spring located betwenn the vbar and athe a rem frzme and slidable mounting the bar in channel between two arms suspendef from the arm frame.

  14. Lettuce contact allergy.

    PubMed

    Paulsen, Evy; Andersen, Klaus E

    2016-02-01

    Lettuce (Lactuca sativa L.) and its varieties are important vegetable crops worldwide. They are also well-known, rarely reported, causes of contact allergy. As lettuce allergens and extracts are not commercially available, the allergy may be underdiagnosed. The aims of this article are to present new data on lettuce contact allergy and review the literature. Lettuce is weakly allergenic, and occupational cases are mainly reported. Using aimed patch testing in Compositae-allergic patients, two recent Danish studies showed prevalence rates of positive lettuce reactions of 11% and 22%. The majority of cases are non-occupational, and may partly be caused by cross-reactivity. The sesquiterpene lactone mix seems to be a poor screening agent for lettuce contact allergy, as the prevalence of positive reactions is significantly higher in non-occupationally sensitized patients. Because of the easy degradability of lettuce allergens, it is recommended to patch test with freshly cut lettuce stem and supplement this with Compositae mix. As contact urticaria and protein contact dermatitis may present as dermatitis, it is important to perform prick-to-prick tests, and possibly scratch patch tests as well. Any person who is occupationally exposed to lettuce for longer periods, especially atopics, amateur gardeners, and persons keeping lettuce-eating pets, is potentially at risk of developing lettuce contact allergy.

  15. The contact caveat: negative contact predicts increased prejudice more than positive contact predicts reduced prejudice.

    PubMed

    Barlow, Fiona Kate; Paolini, Stefania; Pedersen, Anne; Hornsey, Matthew J; Radke, Helena R M; Harwood, Jake; Rubin, Mark; Sibley, Chris G

    2012-12-01

    Contact researchers have largely overlooked the potential for negative intergroup contact to increase prejudice. In Study 1, we tested the interaction between contact quantity and valence on prejudice toward Black Australians (n = 1,476), Muslim Australians (n = 173), and asylum seekers (n = 293). In all cases, the association between contact quantity and prejudice was moderated by its valence, with negative contact emerging as a stronger and more consistent predictor than positive contact. In Study 2, White Americans (n = 441) indicated how much positive and negative contact they had with Black Americans on separate measures. Although both quantity of positive and negative contact predicted racism and avoidance, negative contact was the stronger predictor. Furthermore, negative (but not positive) contact independently predicted suspicion about Barack Obama's birthplace. These results extend the contact hypothesis by issuing an important caveat: Negative contact may be more strongly associated with increased racism and discrimination than positive contact is with its reduction.

  16. Contact Lenses for Vision Correction

    MedlinePlus

    ... Contact Lenses Colored Contact Lenses Contact Lenses for Vision Correction Written by: Kierstan Boyd Reviewed by: Brenda ... on the surface of the eye. They correct vision like eyeglasses do and are safe when used ...

  17. Shoe allergic contact dermatitis.

    PubMed

    Matthys, Erin; Zahir, Amir; Ehrlich, Alison

    2014-01-01

    Foot dermatitis is a widespread condition, affecting men and women of all ages. Because of the location, this condition may present as a debilitating problem to those who have it. Allergic contact dermatitis involving the feet is frequently due to shoes or socks. The allergens that cause shoe dermatitis can be found in any constituent of footwear, including rubber, adhesives, leather, dyes, metals, and medicaments. The goal of treatment is to identify and minimize contact with the offending allergen(s). The lack of product information released from shoe manufacturers and the continually changing trends in footwear present a challenge in treating this condition. The aim of this study is to review the current literature on allergic contact shoe dermatitis; clinical presentation, allergens, patch testing, and management will be discussed. PubMed and MEDLINE databases were used for the search, with a focus on literature updates from the last 15 years.

  18. Acrylate Systemic Contact Dermatitis.

    PubMed

    Sauder, Maxwell B; Pratt, Melanie D

    2015-01-01

    Acrylates, the 2012 American Contact Dermatitis Society allergen of the year, are found in a range of products including the absorbent materials within feminine hygiene pads. When fully polymerized, acrylates are nonimmunogenic; however, if not completely cured, the monomers can be potent allergens.A 28-year-old woman is presented, who had her teeth varnished with Isodan (Septodont, Saint-Maur-des-Fossés, France) containing HEMA (2-hydroxyethyl methacrylate) with no initial reaction. Approximately 1 month later, the patient developed a genital dermatitis secondary to her feminine hygiene pads. The initial reaction resolved, but 5 months later, the patient developed a systemic contact dermatitis after receiving a second varnishing.The patient was dramatically patch test positive to many acrylates. This case demonstrates a reaction to likely unpolymerized acrylates within a feminine hygiene pad, as well as broad cross-reactivity or cosensitivity to acrylates, and possibly a systemic contact dermatitis with systemic re-exposure to unpolymerized acrylates.

  19. Have Confidence in Contact

    ERIC Educational Resources Information Center

    Crisp, Richard J.; Turner, Rhiannon N.

    2010-01-01

    In an article in the May-June 2009 "American Psychologist," we discussed a new approach to reducing prejudice and encouraging more positive intergroup relations (Crisp & Turner, 2009). We named the approach imagined intergroup contact and defined it as "the mental simulation of a social interaction with a member or members of an outgroup category"…

  20. The Language Contact Profile

    ERIC Educational Resources Information Center

    Freed, Barbara F.; Dewey, Dan P.; Segalowitz, Norman; Halter, Randall

    2004-01-01

    Efforts to gather data of various sorts--demographics, language-learning history, contact with native speakers, use of the language in the field--as they relate to participants in SLA research studies are inherent to understanding more about language acquisition and use. Scholars frequently develop questionnaires of their own, which are rarely…

  1. Thermal Contact Conductance

    NASA Technical Reports Server (NTRS)

    Salerno, Louis J.; Kittel, Peter

    1997-01-01

    The performance of cryogenic instruments is often a function of their operating temperature. Thus, designers of cryogenic instruments often are required to predict the operating temperature of each instrument they design. This requires accurate thermal models of cryogenic components which include the properties of the materials and assembly techniques used. When components are bolted or otherwise pressed together, a knowledge of the thermal performance of such joints are also needed. In some cases, the temperature drop across these joints represents a significant fraction of the total temperature difference between the instrument and its cooler. While extensive databases exist on the thermal properties of bulk materials, similar databases for pressed contacts do not. This has often lead to instrument designs that avoid pressed contacts or to the over-design of such joints at unnecessary expense. Although many people have made measurements of contact conductances at cryogenic temperatures, this data is often very narrow in scope and even more often it has not been published in an easily retrievable fashion, if published at all. This paper presents a summary of the limited pressed contact data available in the literature.

  2. [Contact allergies in musicians].

    PubMed

    Gasenzer, E R; Neugebauer, E A M

    2012-12-01

    During the last years, the problem of allergic diseases has increased. Allergies are errant immune responses to a normally harmless substance. In musicians the allergic contact dermatitis to exotic woods is a special problem. Exotic rosewood contains new flavonoids, which trigger an allergic reaction after permanent contact with the instrument. High quality woodwind instruments such as baroque flute or clarinets are made in ebony or palisander because of its great sound. Today instruments for non-professional players are also made in these exotic materials and non-professionals may have the risk to develop contact dermatitis, too. Brass-player has the risk of an allergic reaction to the different metals contained in the metal sheets of modern flutes and brass instruments. Specially nickel and brass alloys are used to product flute tubes or brass instruments. Special problem arises in children: patients who are allergic to plants or foods have a high risk to develop contact dermatitis. Parents don't know the materials of low-priced instruments for beginners. Often unknown cheap woods from exotic areas are used. Low-priced brass instruments contain high amount of brass and other cheap metals. Physicians should advice musician-patients or parents about the risks of the different materials and look for the reason of eczema on mouth, face, or hands. PMID:23233303

  3. Contact sensitivity to proflavine.

    PubMed

    Goh, C L

    1986-09-01

    Proflavine lotion is a commonly used topical antiseptic in the tropics, but its sensitizing potential was never emphasized and many who developed allergic contact dermatitis were never aware of it. In a study of 45 patients, most presented with acute or subacute dermatitis which started on the arms and legs. Concomitant cutaneous sensitivity to other medicaments and lanolin occurred in 66% of the patients.

  4. [Current contact allergens].

    PubMed

    Geier, J; Uter, W; Lessmann, H; Schnuch, A

    2011-10-01

    Ever-changing exposure to contact allergens, partly due to statutory directives (e.g. nickel, chromate, methyldibromo glutaronitrile) or recommendations from industrial associations (e.g. hydroxyisohexyl 3-cyclohexene carboxaldehyde), requires on-going epidemiologic surveillance of contact allergy. In this paper, the current state with special focus in fragrances and preservatives is described on the basis of data of the Information Network of Departments of Dermatology (IVDK) of the year 2010. In 2010, 12,574 patients were patch tested in the dermatology departments belonging to the IVDK. Nickel is still the most frequent contact allergen. However the continuously improved EU nickel directive already has some beneficial effect; sensitization frequency in young women is dropping. In Germany, chromate-reduced cement has been in use now for several years, leading to a decline in chromate sensitization in brick-layers. Two fragrance mixes are part of the German baseline series; they are still relevant. The most important fragrances in these mixes still are oak moss absolute and hydroxyisohexyl 3-cyclohexene carboxaldehyde. However, in relation to these leading allergens, sensitization frequency to other fragrances contained in the mixes seems to be increasing. Among the preservatives, MCI/MI has not lost its importance as contact allergen, in contrast to MDBGN. Sources of MCI/MI sensitization obviously are increasingly found in occupational context. Methylisothiazolinone is a significant allergen in occupational settings, and less frequently in body care products.

  5. Contact Efflorescence on Demand

    NASA Astrophysics Data System (ADS)

    Davis, R. D.; Lance, S.; Gordon, J. A.; Ushijima, S.; Tolbert, M. A.

    2014-12-01

    The phase state of atmospheric aerosols (liquid vs solid) plays an important role in particle growth, cloud formation, climate impact and visibility degradation. In the atmosphere, changes in relative humidity (RH) and temperature cause phase transitions in the atmospheric particulate. Efflorescence, the process of salt crystal nucleation from an aqueous electrolyte solution upon decreasing RH, often occurs at a lower RH than the reverse process of deliquescence. It has been shown that the efflorescence RH can occur at a higher RH in the presence of a heterogeneous surface immersed in a liquid particle. Here we present a new laboratory technique using optically levitated particles to study heterogeneous efflorescence initiated by contact with an external particle. In this work, collisions between aqueous microdroplets and heterogeneous nuclei are monitored in situ using scattered laser light to quantify the number of collisions and to detect phase transitions. We find that when contact initiates the phase transition, efflorescence occurs at a higher RH than when the same heterogeneous nucleus is immersed in the particle. The results of these experiments will be discussed in the context of understanding contact nucleation on a mechanistic level and predicting the relative importance of contact efflorescence in the atmosphere.

  6. Multigrid contact detection method

    NASA Astrophysics Data System (ADS)

    He, Kejing; Dong, Shoubin; Zhou, Zhaoyao

    2007-03-01

    Contact detection is a general problem of many physical simulations. This work presents a O(N) multigrid method for general contact detection problems (MGCD). The multigrid idea is integrated with contact detection problems. Both the time complexity and memory consumption of the MGCD are O(N) . Unlike other methods, whose efficiencies are influenced strongly by the object size distribution, the performance of MGCD is insensitive to the object size distribution. We compare the MGCD with the no binary search (NBS) method and the multilevel boxing method in three dimensions for both time complexity and memory consumption. For objects with similar size, the MGCD is as good as the NBS method, both of which outperform the multilevel boxing method regarding memory consumption. For objects with diverse size, the MGCD outperform both the NBS method and the multilevel boxing method. We use the MGCD to solve the contact detection problem for a granular simulation system based on the discrete element method. From this granular simulation, we get the density property of monosize packing and binary packing with size ratio equal to 10. The packing density for monosize particles is 0.636. For binary packing with size ratio equal to 10, when the number of small particles is 300 times as the number of big particles, the maximal packing density 0.824 is achieved.

  7. Compact contacting device

    NASA Technical Reports Server (NTRS)

    Acharya, Arun (Inventor); Gottzmann, Christian F. (Inventor); Lockett, Michael J. (Inventor); Schneider, James S. (Inventor); Victor, Richard A. (Inventor); Zawierucha, Robert (Inventor)

    1994-01-01

    An apparatus comprising a rotatable mass of structured packing for mass or heat transfer between two contacting fluids of different densities wherein the packing mass is made up of corrugated sheets of involute shape relative to the axis of the packing mass and form a logarithmic spiral curved counter to the direction of rotation.

  8. [Contact allergies in musicians].

    PubMed

    Gasenzer, E R; Neugebauer, E A M

    2012-12-01

    During the last years, the problem of allergic diseases has increased. Allergies are errant immune responses to a normally harmless substance. In musicians the allergic contact dermatitis to exotic woods is a special problem. Exotic rosewood contains new flavonoids, which trigger an allergic reaction after permanent contact with the instrument. High quality woodwind instruments such as baroque flute or clarinets are made in ebony or palisander because of its great sound. Today instruments for non-professional players are also made in these exotic materials and non-professionals may have the risk to develop contact dermatitis, too. Brass-player has the risk of an allergic reaction to the different metals contained in the metal sheets of modern flutes and brass instruments. Specially nickel and brass alloys are used to product flute tubes or brass instruments. Special problem arises in children: patients who are allergic to plants or foods have a high risk to develop contact dermatitis. Parents don't know the materials of low-priced instruments for beginners. Often unknown cheap woods from exotic areas are used. Low-priced brass instruments contain high amount of brass and other cheap metals. Physicians should advice musician-patients or parents about the risks of the different materials and look for the reason of eczema on mouth, face, or hands.

  9. Contact: Releasing the news

    NASA Astrophysics Data System (ADS)

    Pinotti, Roberto

    The problem of mass behavior after man's future contacts with other intelligences in the universe is not only a challenge for social scientists and political leaders all over the world, but also a cultural time bomb as well. In fact, since the impact of CETI (Contact with Extraterrestrial Intelligence) on human civilization, with its different cultures, might cause a serious socio-anthropological shock, a common and predetermined worldwide strategy is necessary in releasing the news after the contact, in order to keep possible manifestations of fear, panic and hysteria under control. An analysis of past studies in this field and of parallel historical situations as analogs suggests a definite "authority crisis" in the public as a direct consequence of an unexpected release of the news, involving a devastating "chain reaction" process (from both the psychological and sociological viewpoints) of anomie and maybe the collapse of today's society. The only way to prevent all this is to prepare the world's public opinion concerning contact before releasing the news, and to develop a long-term strategy through the combined efforts of scientists, political leaders, intelligence agencies and the mass media, in order to create the cultural conditions in which a confrontation with ETI won't affect mankind in a traumatic way. Definite roles and tasks in this multi-level model are suggested.

  10. Direct-contact heat exchanger

    NASA Astrophysics Data System (ADS)

    Bricard, A.

    The working principle of direct contact heat exchanger, where heat transfer takes place between two immiscible fluids coming into direct contact, is described. Typical direct contact devices are outlined. A better understanding of the principles involved and the development of computational models for multiphase subsytems are concluded as stimulus for direct contact heat and mass transfer applications.

  11. Contact Graph Routing

    NASA Technical Reports Server (NTRS)

    Burleigh, Scott C.

    2011-01-01

    Contact Graph Routing (CGR) is a dynamic routing system that computes routes through a time-varying topology of scheduled communication contacts in a network based on the DTN (Delay-Tolerant Networking) architecture. It is designed to enable dynamic selection of data transmission routes in a space network based on DTN. This dynamic responsiveness in route computation should be significantly more effective and less expensive than static routing, increasing total data return while at the same time reducing mission operations cost and risk. The basic strategy of CGR is to take advantage of the fact that, since flight mission communication operations are planned in detail, the communication routes between any pair of bundle agents in a population of nodes that have all been informed of one another's plans can be inferred from those plans rather than discovered via dialogue (which is impractical over long one-way-light-time space links). Messages that convey this planning information are used to construct contact graphs (time-varying models of network connectivity) from which CGR automatically computes efficient routes for bundles. Automatic route selection increases the flexibility and resilience of the space network, simplifying cross-support and reducing mission management costs. Note that there are no routing tables in Contact Graph Routing. The best route for a bundle destined for a given node may routinely be different from the best route for a different bundle destined for the same node, depending on bundle priority, bundle expiration time, and changes in the current lengths of transmission queues for neighboring nodes; routes must be computed individually for each bundle, from the Bundle Protocol agent's current network connectivity model for the bundle s destination node (the contact graph). Clearly this places a premium on optimizing the implementation of the route computation algorithm. The scalability of CGR to very large networks remains a research topic

  12. [Contact dermatitis from Agave americana].

    PubMed

    de la Cueva, Pablo; González-Carrascosa, Mateo; Campos, Minia; Leis, Vicente; Suárez, Ricardo; Lázaro, Pablo

    2005-10-01

    Numerous plant species and their derivatives can cause skin reactions through a variety of mechanisms: irritative contact dermatitis, allergic contact dermatitis, contact urticaria and photodermatitis. We present a case of irritative contact dermatitis after exposure to the sap of Agave americana. The skin symptoms in this case have only been described on rare occasions; although this condition usually presents with a papulovesicular rash, in this patient it appeared as purpuric lesions in the contact area.

  13. Semiconductor ohmic contact

    NASA Technical Reports Server (NTRS)

    Hawrylo, Frank Zygmunt (Inventor); Kressel, Henry (Inventor)

    1977-01-01

    A semiconductor device has one surface of P type conductivity material having a wide energy bandgap and a large crystal lattice parameter. Applied to the P type surface of the semiconductor device is a degenerate region of semiconductor material, preferably a group III-V semiconductor material, having a narrower energy bandgap. The degenerate region is doped with tin to increase the crystal lattice of the region to more closely approximate the crystal lattice of the one surface of the semiconductor device. The degenerate region is compensatingly doped with a P type conductivity modifier. An electrical contact is applied to one surface of the degenerate region forming an ohmic contact with the semiconductor device.

  14. Contact dynamics math model

    NASA Technical Reports Server (NTRS)

    Glaese, John R.; Tobbe, Patrick A.

    1986-01-01

    The Space Station Mechanism Test Bed consists of a hydraulically driven, computer controlled six degree of freedom (DOF) motion system with which docking, berthing, and other mechanisms can be evaluated. Measured contact forces and moments are provided to the simulation host computer to enable representation of orbital contact dynamics. This report describes the development of a generalized math model which represents the relative motion between two rigid orbiting vehicles. The model allows motion in six DOF for each body, with no vehicle size limitation. The rotational and translational equations of motion are derived. The method used to transform the forces and moments from the sensor location to the vehicles' centers of mass is also explained. Two math models of docking mechanisms, a simple translational spring and the Remote Manipulator System end effector, are presented along with simulation results. The translational spring model is used in an attempt to verify the simulation with compensated hardware in the loop results.

  15. /Au Back Contacts

    NASA Astrophysics Data System (ADS)

    Paudel, Naba R.; Compaan, Alvin D.; Yan, Yanfa

    2014-08-01

    We report on the fabrication and characterization of CdTe thin-film solar cells with Cu-free MoO3- x /Au back contacts. CdTe solar cells with sputtered CdTe absorbers of thicknesses from 0.5 to 1.75 μm were fabricated on Pilkington SnO2:F/SnO2-coated soda-lime glasses coated with a 60- to 80-nm sputtered CdS layer. The MoO3- x /Au back contact layers were deposited by thermal evaporation. The incorporation of MoO3- x layer was found to improve the open circuit voltage ( V OC) but reduce the fill factor of the ultrathin CdTe cells. The V OC was found to increase as the CdTe thickness increased.

  16. [Contact allergy to cosmetics].

    PubMed

    Goossens, A; Merckx, L

    1997-12-01

    This article gives the results of contact allergic reactions to cosmetics seen between 1985 and 1990 (462 patients investigated) and between 1991 and 1996 (486 patients investigated). Perfume components remain the most frequently occurring allergens in cosmetics. They are followed by preservative agents, a class within which important shifts have occurred over time (e.g. as with the isothiazolinone mixture). Excipients and certainly emulsifiers (e.g. cocamidopropylbetaine) are potentially not only irritants but also allergens. Among the "active" or category-specific ingredients, oxidative hair dyes, based on paraphenylenediamine and derivatives, and nail care products, based on (meth)acrylates are particularly apt to cause professional dermatoses. Finally, the share of sunscreens as cosmetic allergens remains limited, which may well be because a contact or photocontactallergy is often not recognized since the differential diagnosis with a primary sun intolerance is not always obvious.

  17. Contact dermatitis from propolis.

    PubMed

    Wanscher, B

    1976-04-01

    Two patients with contact dermatitis due to the natural product propolis (bee glue) are reported. They presented perioral eczema and stomatitis which were recalcitrant until propolis was considered as the cause. Patch tests with propolis preparations were positive in both patients, and, furthermore, in the second patient the lesions relapsed after provocation tests. European standard patch test including balsam of Peru were negative. The complexity of propolis, its supposed anti-inflammatory effect due to flavonoids, and the sensitizing agents originating mainly from the poplar trees are discussed together with the cross-sensitization to balsam of Peru. Contact dermatitis due to propolis should be considered in unexplained eczemas, mainly perioral but also in other areas, as propolis preparations are available also as ointments and cosmetic creams.

  18. Contact dermatitis in children

    PubMed Central

    2010-01-01

    Contact dermatitis in pediatric population is a common but (previously) under recognized disease. It is usually divided into the allergic and the irritant forms. The diagnosis is usually obtained with the patch test technique after conducting a thorough medical history and careful physical examination but patch testing in infants may be particularly difficult, and false-positive reactions may occur. This study also provides an overview of the most common allergens in pediatric population and discusses various therapeutic modalities. PMID:20205907

  19. Contact dermatitis in children.

    PubMed

    Rademaker, M; Forsyth, A

    1989-02-01

    125 children under the age of 12 years were patch tested over a period of 7 years. 60 (48%) of the children had 1 or more positive (+ve) reactions, of which 92% (55/60) were considered relevant. The most common allergens were metals (35 + ves), fragrances (24 + ves) and rubber compounds (11 + ves). 40 of the children were also tested for contact urticaria against food additives and fragrances, of whom 20 were positive (benzoic acid 14, cinnamaldehyde 12).

  20. Contact stress sensor

    DOEpatents

    Kotovsky, Jack

    2012-02-07

    A contact stress sensor includes one or more MEMS fabricated sensor elements, where each sensor element of includes a thin non-recessed portion, a recessed portion and a pressure sensitive element adjacent to the recessed portion. An electric circuit is connected to the pressure sensitive element. The circuit includes a thermal compensator and a pressure signal circuit element configured to provide a signal upon movement of the pressure sensitive element.

  1. Contact stress sensor

    DOEpatents

    Kotovsky, Jack

    2014-02-11

    A method for producing a contact stress sensor that includes one or more MEMS fabricated sensor elements, where each sensor element of includes a thin non-recessed portion, a recessed portion and a pressure sensitive element adjacent to the recessed portion. An electric circuit is connected to the pressure sensitive element. The circuit includes a pressure signal circuit element configured to provide a signal upon movement of the pressure sensitive element.

  2. Functional modular contact lens

    NASA Astrophysics Data System (ADS)

    Shum, Angela J.; Cowan, Melissa; Lähdesmäki, Ilkka; Lingley, Andrew; Otis, Brian; Parviz, Babak A.

    2009-08-01

    Tear fluid offers a potential route for non-invasive sensing of physiological parameters. Utilization of this potential depends on the ability to manufacture sensors that can be placed on the surface of the eye. A contact lens makes a natural platform for such sensors, but contact lens polymers present a challenge for sensor fabrication. This paper describes a microfabrication process for constructing sensors that can be integrated into the structure of a functional contact lens in the future. To demonstrate the capabilities of the process, an amperometric glucose sensor was fabricated on a polymer substrate. The sensor consists of platinum working and counter electrodes, as well as a region of indium-tin oxide (ITO) for glucose oxidase immobilization. An external silver-silver chloride electrode was used as the reference electrode during the characterization experiments. Sensor operation was validated by hydrogen peroxide measurements in the 10- 20 μM range and glucose measurements in the 0.125-20 mM range.

  3. Dual contact pogo pin assembly

    DOEpatents

    Hatch, Stephen McGarry

    2015-01-20

    A contact assembly includes a base and a pair of electrical contacts supported by the base. A first end of the first electrical contact corresponds to a first end of the base and is configured to engage a first external conductive circuit element. A first end of the second electrical contact also corresponds to the first end of the base and is configured to engage a second external conductive circuit element. The first contact and the second contact are electrically isolated from one another and configured to compress when engaging an external connector element. The base includes an aperture positioned on a second end of the base outboard of a second end of the first and second electrical contacts. The aperture presents a narrowing shape with a wide mouth distal the electrical contacts and a narrow internal through-hole proximate the electrical contacts.

  4. Dual contact pogo pin assembly

    DOEpatents

    Hatch, Stephen McGarry

    2016-06-21

    A contact assembly includes a base and a pair of electrical contacts supported by the base. A first end of the first electrical contact corresponds to a first end of the base and is configured to engage a first external conductive circuit element. A first end of the second electrical contact also corresponds to the first end of the base and is configured to engage a second external conductive circuit element. The first contact and the second contact are electrically isolated from one another and configured to compress when engaging an external connector element. The base includes an aperture positioned on a second end of the base outboard of a second end of the first and second electrical contacts. The aperture presents a narrowing shape with a wide mouth distal the electrical contacts and a narrow internal through-hole proximate the electrical contacts.

  5. Contact dermatitis to methylisothiazolinone*

    PubMed Central

    Scherrer, Maria Antonieta Rios; Rocha, Vanessa Barreto; Andrade, Ana Regina Coelho

    2015-01-01

    Methylisothiazolinone (MI) is a preservative found in cosmetic and industrial products. Contact dermatitis caused by either methylchloroisothiazolinone/methylisothiazolinone (MCI/MI or Kathon CG) or MI has shown increasing frequency. The latter is preferably detected through epicutaneous testing with aqueous MI 2000 ppm, which is not included in the Brazilian standard tray. We describe a series of 23 patients tested using it and our standard tray. A case with negative reaction to MCI/MI and positive to MI is emphasized. PMID:26734880

  6. Adhesion in hydrogel contacts

    NASA Astrophysics Data System (ADS)

    Torres, J. R.; Jay, G. D.; Kim, K.-S.; Bothun, G. D.

    2016-05-01

    A generalized thermomechanical model for adhesion was developed to elucidate the mechanisms of dissipation within the viscoelastic bulk of a hyperelastic hydrogel. Results show that in addition to the expected energy release rate of interface formation, as well as the viscous flow dissipation, the bulk composition exhibits dissipation due to phase inhomogeneity morphological changes. The mixing thermodynamics of the matrix and solvent determines the dynamics of the phase inhomogeneities, which can enhance or disrupt adhesion. The model also accounts for the time-dependent behaviour. A parameter is proposed to discern the dominant dissipation mechanism in hydrogel contact detachment.

  7. Adhesive Contact Sweeper

    NASA Technical Reports Server (NTRS)

    Patterson, Jonathan D.

    1993-01-01

    Adhesive contact sweeper removes hair and particles vacuum cleaner leaves behind, without stirring up dust. Also cleans loose rugs. Sweeper holds commercially available spools of inverted adhesive tape. Suitable for use in environments in which air kept free of dust; optics laboratories, computer rooms, and areas inhabited by people allergic to dust. For carpets, best used in tandem with vacuum cleaner; first pass with vacuum cleaner removes coarse particles, and second pass with sweeper extracts fine particles. This practice extends useful life of adhesive spools.

  8. Contact Lenses in the Laboratory.

    ERIC Educational Resources Information Center

    Kingston, David W.

    1981-01-01

    Summarizes results of a three-item questionnaire returned by 43 Michigan institutions expressing views on wearing contact lenses in chemical laboratories. Questions focused on eye protection, type of protection, and use of contact lenses. (SK)

  9. [Systemic contact dermatitis].

    PubMed

    Nowak, Daria; Gomułka, Krzysztof; Dziemieszonek, Paulina; Panaszek, Bernard

    2016-01-01

    Systemic contact dermatitis (SCD) is a skin inflammation occurring in a patient after systemic administration of a hapten, which previously caused an allergic contact skin reaction in the same person. Most frequently, hypersensitivity reactions typical for SCD occur after absorption of haptens with food or inhalation. Haptens occur mainly in the forms of metals and compounds present in natural resins, preservatives, food thickeners, flavorings and medicines. For many years, several studies have been conducted on understanding the pathogenesis of SCD in which both delayed type hypersensitivity (type IV) and immediate type I are observed. Components of the complement system are also suspected to attend there. Helper T cells (Th) (Th1 and Th2), cytotoxic T lymphocytes (Tc), and NK cells play a crucial role in the pathogenesis of SCD. They secrete a number of pro-inflammatory cytokines. In addition, regulatory T cells (Tregs) have an important role. They control and inhibit activity of the immune system during inflammation. Tregs release suppressor cytokines and interact directly with a target cell through presentation of immunosuppressive particles at the cell surface. Diagnostic methods are generally the patch test, oral provocation test, elimination diet and lymphocyte stimulation test. There are many kinds of inflammatory skin reactions caused by systemic haptens' distribution. They are manifested in a variety of clinical phenotypes of the disease. PMID:26943310

  10. Allergic Contact Dermatitis

    PubMed Central

    Nelson, Jenny L.

    2010-01-01

    Epicutaneous patch testing is the gold standard method for the diagnosis of allergic contact dermatitis. Despite this knowledge, many clinical dermatologists do not offer patch testing in their offices or offer testing with only a limited number of allergens. Introduced in 1995, the Thin-Layer Rapid Use Epicutaneous Test originally contained 23 allergens and one control. In 2007, five additional allergens were added. This United States Food and Drug Administration-approved patch testing system made patch testing more convenient, and after its introduction, more dermatologists offered patch testing services. However, the number of allergens in the Thin-Layer Rapid Use Epicutaneous Test remains relatively low. Every two years, the North American Contact Dermatitis Group collects and reports the data from patch testing among its members to a standardized series of allergens. In 2005-2006, the Group used a series of 65 allergens. Of the top 30 allergens reported in 2005-2006, 10 were not included in the Thin-Layer Rapid Use Epicutaneous Test. Knowledge of and testing for additional allergens such as these may increase patch testing yield. PMID:20967194

  11. [Genetics of contact allergy].

    PubMed

    Schnuch, A

    2011-10-01

    The genetics of contact allergy (CA) is still only partly understood, despite decades of research. This might be due to inadequately defined phenotypes used in the past. Therefore we suggested studying an extreme phenotype, namely, polysensitization (sensitization to 3 or more unrelated allergens). Another approach to unravel the genetics of CA has been the study of candidate genes. In this review, we summarize studies on the associations between genetic variation (e.g. SNPs) in certain candidate genes and CA. The following polymorphisms and mutations were studied: (1) filaggrin, (2) N-acetyltransferase (NAT1 and 2), (3) glutathione-S-transferase (GST M and T), (4) manganese superoxide dismutase, (5) angiotensin-converting enzyme (ACE), (6) tumor necrosis factor (TNF), and (7) interleukin-16 (IL16). The polymorphisms of NAT1/2, GST M/T, ACE, TNF, and IL16 were shown to be associated with an increased risk of CA. In one of our studies, the increased risk conferred by the TNF and IL16 polymorphisms was confined to polysensitized individuals. Other relevant candidate genes may be identified by studying diseases related to CA in terms of clinical symptoms, a more general pathology (inflammation) and possibly an overlapping genetic background, such as irritant contact dermatitis. PMID:21904893

  12. Determination of the Actual Contact Surface of a Brush Contact

    NASA Technical Reports Server (NTRS)

    Holm, Ragnar

    1944-01-01

    The number of partial contact surfaces of a brush-ring contact is measured by means of a statistical method. The particular brush is fitted with wicks - that is, insulated and cemented cylinders of brush material, terminating in the brush surface. The number of partial contact surfaces can be computed from the length of the rest periods in which such wicks remain without current. Resistance measurements enable the determination of the size of the contact surfaces. The pressure in the actual contact surface of a recently bedded brush is found to be not much lower than the Brinell hardness of the brush.

  13. Contact position sensor using constant contact force control system

    NASA Technical Reports Server (NTRS)

    Sturdevant, Jay (Inventor)

    1995-01-01

    A force control system (50) and method are provided for controlling a position contact sensor (10) so as to produce a constant controlled contact force therewith. The system (50) includes a contact position sensor (10) which has a contact probe (12) for contacting the surface of a target to be measured and an output signal (V.sub.o) for providing a position indication thereof. An actuator (30) is provided for controllably driving the contact position sensor (10) in response to an actuation control signal (I). A controller (52) receives the position indication signal (V.sub.o) and generates in response thereto the actuation control signal (I) so as to provide a substantially constant selective force (F) exerted by the contact probe (12). The actuation drive signal (I) is generated further in response to substantially linear approximation curves based on predetermined force and position data attained from the sensor (10) and the actuator (30).

  14. Contact dermatitis in blacks.

    PubMed

    Berardesca, E; Maibach, H I

    1988-07-01

    Black skin is characterized by structural and functional differences such as increased stratum corneum cohesion, melanin content, and stratum corneum layers. These differences seem to make black skin difficult for irritants and light to penetrate, thus explaining the common opinion that skin in blacks is harder and develops contact dermatitis less frequently. The paucity of interpretable epidemiologic data and of clinical and experimental studies does not permit confirmation of this hypothesis, and the few data available are controversial. This article describes the main physiologic differences between black and white barrier function and reviews the literature on irritation, sensitization, and transcutaneous penetration. We found that the data are still too incomplete to generalize on the resistance, or lack thereof, of black skin (versus white skin) to chemical irritation, sensitization, and penetration. PMID:3048818

  15. Update on contact lithotripsy.

    PubMed

    Michel, M S; Köhrmann, K U; Alken, P

    2000-11-01

    Despite the development of extracorporeal shockwave lithotripsy, endoscopic stone removal, with or without intracorporeal lithotripsy, is still an effective minimally invasive alternative for special indications. There is no defined all-purpose lithotripsy procedure for contact lithotripsy. The choice of the lithotripsy procedure for endoscopic stone disintegration depends on a number of different factors, the main one being stone localization. Small calibre, flexible probes (electrohydraulic, pneumatic, laser) are especially appropriate for ureterorenoscopy, but the speed of stone disintegration is a limiting factor. In contrast, large calibre rigid probes (ultrasound) are clearly more effective, but are unsuitable in size for flexible ureterorenoscopy. This indicates that the type and size of the endoscope decisively influences the choice of devices for endoscopic stone disintegration. Additional inhibiting factors are the flexibility or the rigidity of the instrument and the diameter of the working channel. It must be noted that total costs are not only calculated on the purchase of the equipment, but must also cover disposable materials.

  16. Contact dermatitis to fragrances.

    PubMed

    Santucci, B; Cristaudo, A; Cannistraci, C; Picardo, M

    1987-02-01

    2 groups of patients (1200 and 1500 respectively) were patch tested with different concentrations of perfume mix and fragrance raw materials. The study was to evaluate the incidence of contact dermatitis to fragrances in Roma, Italy, and the influence of limited variations in fragrance and perfume mix concentrations on patch test responses. The results showed that a decrease in the perfume mix concentration from 16% to 8% correlated with a decrease in the % of positive patients (from 5.2% to 3.6%). Variations in the concentration of fragrance raw materials did not influence the % of positive reactions in the 2 groups. The perfume mixture at 16% or 8% gave some positive results, without a corresponding reaction to any of the constituents, that were not related to an excited skin syndrome.

  17. Contact dermatitis in blacks.

    PubMed

    Berardesca, E; Maibach, H I

    1988-07-01

    Black skin is characterized by structural and functional differences such as increased stratum corneum cohesion, melanin content, and stratum corneum layers. These differences seem to make black skin difficult for irritants and light to penetrate, thus explaining the common opinion that skin in blacks is harder and develops contact dermatitis less frequently. The paucity of interpretable epidemiologic data and of clinical and experimental studies does not permit confirmation of this hypothesis, and the few data available are controversial. This article describes the main physiologic differences between black and white barrier function and reviews the literature on irritation, sensitization, and transcutaneous penetration. We found that the data are still too incomplete to generalize on the resistance, or lack thereof, of black skin (versus white skin) to chemical irritation, sensitization, and penetration.

  18. Contact dermatitis to Alstroemeria.

    PubMed

    Santucci, B; Picardo, M; Iavarone, C; Trogolo, C

    1985-04-01

    A study was carried out on 50 workers in a floriculture centre to evaluate the incidence of contact dermatitis to Alstroemeria. 3 subjects gave positive reactions to aqueous and ethanolic extracts of cut flowers, stems and leaves. By column chromatography, the allergen was isolated and its chemical structure identified as 6-tuliposide A by proton magnetic resonance and carbon-13 magnetic resonance. Only 6-tuliposide A was isolated from cut flowers, and this gave positive reactions when patch tested at 0.01%; a-methylene-gamma-butyrolactone at 10(-5) (v/v) was positive in the same 3 subjects. Other lactones (gamma-methylene-gamma-butyrolactone, alantolactone, isoalantolactone) were negative at all concentrations used.

  19. Contact sensing from force measurements

    NASA Technical Reports Server (NTRS)

    Bicchi, Antonio; Salisbury, J. K.; Brock, David L.

    1993-01-01

    This article addresses contact sensing (i.e., the problem of resolving the location of a contact, the force at the interface, and the moment about the contact normals). Called 'intrinsic' contact sensing for the use of internal force and torque measurements, this method allows for practical devices that provide simple, relevant contact information in practical robotic applications. Such sensors have been used in conjunction with robot hands to identify objects, determine surface friction, detect slip, augment grasp stability, measure object mass, probe surfaces, and control collision and for a variety of other useful tasks. This article describes the theoretical basis for their operation and provides a framework for future device design.

  20. Equilibrium contact angle or the most-stable contact angle?

    PubMed

    Montes Ruiz-Cabello, F J; Rodríguez-Valverde, M A; Cabrerizo-Vílchez, M A

    2014-04-01

    It is well-established that the equilibrium contact angle in a thermodynamic framework is an "unattainable" contact angle. Instead, the most-stable contact angle obtained from mechanical stimuli of the system is indeed experimentally accessible. Monitoring the susceptibility of a sessile drop to a mechanical stimulus enables to identify the most stable drop configuration within the practical range of contact angle hysteresis. Two different stimuli may be used with sessile drops: mechanical vibration and tilting. The most stable drop against vibration should reveal the changeless contact angle but against the gravity force, it should reveal the highest resistance to slide down. After the corresponding mechanical stimulus, once the excited drop configuration is examined, the focus will be on the contact angle of the initial drop configuration. This methodology needs to map significantly the static drop configurations with different stable contact angles. The most-stable contact angle, together with the advancing and receding contact angles, completes the description of physically realizable configurations of a solid-liquid system. Since the most-stable contact angle is energetically significant, it may be used in the Wenzel, Cassie or Cassie-Baxter equations accordingly or for the surface energy evaluation.

  1. Reducing contact resistance in graphene devices through contact area patterning.

    PubMed

    Smith, Joshua T; Franklin, Aaron D; Farmer, Damon B; Dimitrakopoulos, Christos D

    2013-04-23

    Performance of graphene electronics is limited by contact resistance associated with the metal-graphene (M-G) interface, where unique transport challenges arise as carriers are injected from a 3D metal into a 2D-graphene sheet. In this work, enhanced carrier injection is experimentally achieved in graphene devices by forming cuts in the graphene within the contact regions. These cuts are oriented normal to the channel and facilitate bonding between the contact metal and carbon atoms at the graphene cut edges, reproducibly maximizing "edge-contacted" injection. Despite the reduction in M-G contact area caused by these cuts, we find that a 32% reduction in contact resistance results in Cu-contacted, two-terminal devices, while a 22% reduction is achieved for top-gated graphene transistors with Pd contacts as compared to conventionally fabricated devices. The crucial role of contact annealing to facilitate this improvement is also elucidated. This simple approach provides a reliable and reproducible means of lowering contact resistance in graphene devices to bolster performance. Importantly, this enhancement requires no additional processing steps.

  2. Point contacts in encapsulated graphene

    SciTech Connect

    Handschin, Clevin; Fülöp, Bálint; Csonka, Szabolcs; Makk, Péter; Blanter, Sofya; Weiss, Markus; Schönenberger, Christian; Watanabe, Kenji; Taniguchi, Takashi

    2015-11-02

    We present a method to establish inner point contacts with dimensions as small as 100 nm on hexagonal boron nitride (hBN) encapsulated graphene heterostructures by pre-patterning the top-hBN in a separate step prior to dry-stacking. 2- and 4-terminal field effect measurements between different lead combinations are in qualitative agreement with an electrostatic model assuming point-like contacts. The measured contact resistances are 0.5–1.5 kΩ per contact, which is quite low for such small contacts. By applying a perpendicular magnetic field, an insulating behaviour in the quantum Hall regime was observed, as expected for inner contacts. The fabricated contacts are compatible with high mobility graphene structures and open up the field for the realization of several electron optical proposals.

  3. A Prototype Antifungal Contact Lens

    PubMed Central

    Ciolino, Joseph B.; Hudson, Sarah P.; Mobbs, Ashley N.; Hoare, Todd R.; Iwata, Naomi G.; Fink, Gerald R.

    2011-01-01

    Purpose. To design a contact lens to treat and prevent fungal ocular infections. Methods. Curved contact lenses were created by encapsulating econazole-impregnated poly(lactic-co-glycolic) acid (PLGA) films in poly(hydroxyethyl methacrylate) (pHEMA) by ultraviolet photopolymerization. Release studies were conducted in phosphate-buffered saline at 37°C with continuous shaking. The contact lenses and their release media were tested in an antifungal assay against Candida albicans. Cross sections of the pre- and postrelease contact lenses were characterized by scanning electron microscopy and by Raman spectroscopy. Results. Econazole-eluting contact lenses provided extended antifungal activity against Candida albicans fungi. Fungicidal activity varied in duration and effectiveness depending on the mass of the econazole-PLGA film encapsulated in the contact lens. Conclusions. An econazole-eluting contact lens could be used as a treatment for fungal ocular infections. PMID:21527380

  4. Hysteresis during contact angles measurement.

    PubMed

    Diaz, M Elena; Fuentes, Javier; Cerro, Ramon L; Savage, Michael D

    2010-03-15

    A theory, based on the presence of an adsorbed film in the vicinity of the triple contact line, provides a molecular interpretation of intrinsic hysteresis during the measurement of static contact angles. Static contact angles are measured by placing a sessile drop on top of a flat solid surface. If the solid surface has not been previously in contact with a vapor phase saturated with the molecules of the liquid phase, the solid surface is free of adsorbed liquid molecules. In the absence of an adsorbed film, molecular forces configure an advancing contact angle larger than the static contact angle. After some time, due to an evaporation/adsorption process, the interface of the drop coexists with an adsorbed film of liquid molecules as part of the equilibrium configuration, denoted as the static contact angle. This equilibrium configuration is metastable because the droplet has a larger vapor pressure than the surrounding flat film. As the drop evaporates, the vapor/liquid interface contracts and the apparent contact line moves towards the center of the drop. During this process, the film left behind is thicker than the adsorbed film and molecular attraction results in a receding contact angle, smaller than the equilibrium contact angle.

  5. Determining a Surrogate Contact Pair in a Hertzian Contact Problem.

    PubMed

    Sanders, Anthony P; Brannon, Rebecca M

    2011-04-01

    Laboratory testing of contact phenomena can be prohibitively expensive if the interacting bodies are geometrically complicated. This work demonstrates means to mitigate such problems by exploiting the established observation that two geometrically dissimilar contact pairs may exhibit the same contact mechanics. Specific formulas are derived that allow a complicated Hertzian contact pair to be replaced with an inexpensively manufactured and more easily fixtured surrogate pair, consisting of a plane and a spheroid, which has the same (to second-order accuracy) contact area and pressure distribution as the original complicated geometry. This observation is elucidated by using direct tensor notation to review a key assertion in Hertzian theory; namely, geometrically complicated contacting surfaces can be described to second-order accuracy as contacting ellipsoids. The surrogate spheroid geometry is found via spectral decomposition of the original pair's combined Hessian tensor. Some numerical examples using free-form surfaces illustrate the theory, and a laboratory test validates the theory under a common scenario of normally compressed convex surfaces. This theory for a Hertzian contact substitution may be useful in simplifying the contact, wear, or impact testing of complicated components or of their constituent materials.

  6. Non Contact Measuring Machine

    NASA Astrophysics Data System (ADS)

    Carvalho, Fernando D.; Sebastiao, Pedro; Henriques, Bernardo G.

    1989-01-01

    One of the problems of the production of cables is the measurement of the thickness plastic cover at the production line. If for some reason the thickness of the plastic is smaller than the minimum necessary several meters of cable may be lost. If the problem exists in the middle of a long cable and the default is not detected in time, the loss will be significant. To solve this problem it is possible to use automatic measuring machines which may detect a default as soon as it happens. It is also possible to interact with the production line in order to avoid any losses. In this paper it is presented a non contact measuring machine, developed for this purpose. The machine uses a laser which is scanned through a field of 80 mm. The interruption of the beam gives information about the external dimension of the object. The technical study of the resolution, sensitivity and precision are presented on the paper. Also the hardware solution and the software are presented. The machine has an interface which allows communication with a PC. The PC may receive information from several measuring units and to interact with machines installed at the production line. The prototype is finished and is going to be tested in the industry.

  7. Contact pressure-aided spectroscopy.

    PubMed

    Bregar, Maksimilijan; Bürmen, Miran; Aljancic, Uroš; Cugmas, Blaž; Pernuš, Franjo; Likar, Boštjan

    2014-02-01

    Contact pressure induced by manually operated fiber optic probes can significantly affect the optical properties of the studied tissue. If the contact pressure and the changes in optical properties are measured properly, then the complementary information can be used to obtain additional insight into the tissue physiology. However, as reliable assessment of the contact pressure in the existing diffuse reflectance setups is difficult, the impact of contact pressure is usually neglected or considered as a source of errors. We introduce a measurement system for controlled application of contact pressure and for the acquisition of diffuse reflectance spectra, which is suitable for in vivo studies and for overcoming the limitations of the existing measurement setups. A spectral-contact-pressure plane is proposed to present the combined information, highlighting the unique tissue response to the applied pressure.

  8. A tire contact solution technique

    NASA Technical Reports Server (NTRS)

    Tielking, J. T.

    1983-01-01

    An efficient method for calculating the contact boundary and interfacial pressure distribution was developed. This solution technique utilizes the discrete Fourier transform to establish an influence coefficient matrix for the portion of the pressurized tire surface that may be in the contact region. This matrix is used in a linear algebra algorithm to determine the contact boundary and the array of forces within the boundary that are necessary to hold the tire in equilibrium against a specified contact surface. The algorithm also determines the normal and tangential displacements of those points on the tire surface that are included in the influence coefficient matrix. Displacements within and outside the contact region are calculated. The solution technique is implemented with a finite-element tire model that is based on orthotropic, nonlinear shell of revolution elements which can respond to nonaxisymmetric loads. A sample contact solution is presented.

  9. Protein folding using contact maps.

    PubMed

    Vendruscolo, M; Domany, E

    2000-01-01

    We discuss the problem of representations of protein structure and give the definition of contact maps. We present a method to obtain a three-dimensional polypeptide conformation from a contact map. We also explain how to deal with the case of nonphysical contact maps. We describe a stochastic method to perform dynamics in contact map space. We explain how the motion is restricted to physical regions of the space. First, we introduce the exact free energy of a contact map and discuss two simple approximations to it. Second, we present a method to derive energy parameters based on perception learning. We prove in an extensive number of situations that the pairwise contact approximation both when alone and when supplemented with a hydrophobic term is unsuitable for stabilizing proteins' native states. PMID:10668399

  10. Contact dermatitis to homomenthyl salicylate.

    PubMed

    Rietschel, R L; Lewis, C W

    1978-03-01

    Two patients with follicular dermatitis were found to have a contact sensitivity to homomenthyl salicylate, a sunscreening chemical present in a commercially available suntan lotion. One patient did not use the product, but her boyfriend did, and contact between the two individuals resulted in a follicular dermatitis developing in her. A second patient with contact dermatitis to homomenthyl salicylate also had a follicular eruption. Both patients appear to represent true allergic sensitivities.

  11. Point contact silicon solar cells

    NASA Technical Reports Server (NTRS)

    Swanson, Richard M.

    1987-01-01

    A new type of silicon solar cell has been developed. It is called the point-contact cell because the metal semiconductor contacts are restricted to an array of small points on the back of the cell. The point contact cell has recently demonstrated 22 percent conversion efficiency at one sun and 27.5 percent at 100 suns under an AM1.5 spectrum.

  12. Method for forming metal contacts

    DOEpatents

    Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

    2013-09-17

    Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

  13. Ion Implanted Passivated Contacts for Interdigitated Back Contacted Solar Cells

    SciTech Connect

    Young, David L.; Nemeth, William; LaSalvia, Vincenzo; Reedy, Robert; Bateman, Nicholas; Stradins, Pauls

    2015-06-14

    We describe work towards an interdigitated back contacted (IBC) solar cell utilizing ion implanted, passivated contacts. Formation of electron and hole passivated contacts to n-type CZ wafers using tunneling SiO2 and ion implanted amorphous silicon (a-Si) are described. P and B were ion implanted into intrinsic amorphous Si films at several doses and energies. A series of post-implant anneals showed that the passivation quality improved with increasing annealing temperatures up to 900 degrees C. The recombination parameter, Jo, as measured by a Sinton lifetime tester, was Jo ~ 14 fA/cm2 for Si:P, and Jo ~ 56 fA/cm2 for Si:B contacts. The contact resistivity for the passivated contacts, as measured by TLM patterns, was 14 milliohm-cm2 for the n-type contact and 0.6 milliohm-cm2 for the p-type contact. These Jo and pcontact values are encouraging for forming IBC cells using ion implantation to spatially define dopants.

  14. Molecular dynamics study of contact mechanics: contact area and interfacial separation from small to full contact

    NASA Astrophysics Data System (ADS)

    Yang, Chunyan; Persson, Bo

    2008-03-01

    We report a molecular dynamics study of the contact between a rigid solid with a randomly rough surface and an elastic block with a flat surface. We study the contact area and the interfacial separation from small contact (low load) to full contact (high load). For small load the contact area varies linearly with the load and the interfacial separation depends logarithmically on the load [1-4]. For high load the contact area approaches to the nominal contact area (i.e., complete contact), and the interfacial separation approaches to zero. The present results may be very important for soft solids, e.g., rubber, or for very smooth surfaces, where complete contact can be reached at moderate high loads without plastic deformation of the solids. References: [1] C. Yang and B.N.J. Persson, arXiv:0710.0276, (to appear in Phys. Rev. Lett.) [2] B.N.J. Persson, Phys. Rev. Lett. 99, 125502 (2007) [3] L. Pei, S. Hyun, J.F. Molinari and M.O. Robbins, J. Mech. Phys. Sol. 53, 2385 (2005) [4] M. Benz, K.J. Rosenberg, E.J. Kramer and J.N. Israelachvili, J. Phy. Chem. B.110, 11884 (2006)

  15. Forcing contact inhibition of locomotion.

    PubMed

    Roycroft, Alice; Mayor, Roberto

    2015-07-01

    Contact inhibition of locomotion drives a variety of biological phenomenon, from cell dispersion to collective cell migration and cancer invasion. New imaging techniques have allowed contact inhibition of locomotion to be visualised in vivo for the first time, helping to elucidate some of the molecules and forces involved in this phenomenon.

  16. Fabricating customized hydrogel contact lens

    PubMed Central

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-01-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies. PMID:27748361

  17. Fabricating customized hydrogel contact lens

    NASA Astrophysics Data System (ADS)

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-10-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

  18. Forcing contact inhibition of locomotion

    PubMed Central

    Roycroft, Alice; Mayor, Roberto

    2015-01-01

    Contact inhibition of locomotion drives a variety of biological phenomenon, from cell dispersion to collective cell migration and cancer invasion. New imaging techniques have allowed contact inhibition of locomotion to be visualised in vivo for the first time, helping to elucidate some of the molecules and forces involved in this phenomenon. PMID:25981318

  19. Contact modeling for robotics applications

    SciTech Connect

    Lafarge, R.A.; Lewis, C.

    1998-08-01

    At Sandia National Laboratories (SNL), the authors are developing the ability to accurately predict motions for arbitrary numbers of bodies of arbitrary shapes experiencing multiple applied forces and intermittent contacts. In particular, the authors are concerned with the simulation of systems such as part feeders or mobile robots operating in realistic environments. Preliminary investigation of commercial dynamics software packages led them to the conclusion that they could use commercial software to provide everything they needed except for the contact model. They found that ADAMS best fit their needs for a simulation package. To simulate intermittent contacts, they need collision detection software that can efficiently compute the distances between non-convex objects and return the associated witness features. They also require a computationally efficient contact model for rapid simulation of impact, sustained contact under load, and transition to and from contact conditions. This paper provides a technical review of a custom hierarchical distance computation engine developed at Sandia, called the C-Space Toolkit (CSTk). In addition, they describe an efficient contact model using a non-linear damping term developed by SNL and Ohio State. Both the CSTk and the non-linear damper have been incorporated in a simplified two-body testbed code, which is used to investigate how to correctly model the contact using these two utilities. They have incorporated this model into the ADAMS software using the callable function interface. An example that illustrates the capabilities of the 9.02 release of ADAMS with their extensions is provided.

  20. Contact lens management of keratoconus.

    PubMed

    Downie, Laura E; Lindsay, Richard G

    2015-07-01

    Contact lenses are the primary form of visual correction for patients with keratoconus. Contemporary advances in contact lens designs and materials have significantly expanded the available fitting options for patients with corneal ectasia. Furthermore, imaging technology, such as corneal topography and anterior segment optical coherence tomography, can be applied to both gain insight into corneal microstructural changes and to guide contact lens fitting. This paper provides a comprehensive review of the range of contact lens modalities, including soft lenses, hybrid designs, rigid lenses, piggyback configurations, corneo-scleral, mini-scleral and scleral lenses that are currently available for the optical management of keratoconus. The review also discusses the importance of monitoring for disease progression in patients with keratoconus, in particular children, who tend to undergo more rapid progressive changes, so as to facilitate appropriate modification to contact lens fitting and/or potential referral for corneal collagen cross-linking treatment, as appropriate. PMID:26104589

  1. CORRIGENDUM: Multiscale electrical contact resistance in clustered contact distribution Multiscale electrical contact resistance in clustered contact distribution

    NASA Astrophysics Data System (ADS)

    Lee, Sangyoung; Cho, Hyun; Jang, Yong Hoon

    2010-06-01

    The authors wish to explain the similarity between some figures in the above paper (hereafter called the JPD paper) and in their other publication, Lee S, Jang Y H and Kim W 2008 Effects of nanosized contact spots on thermal contact resistance J. Appl. Phys.103 074308 (hereafter called the JAP paper), and to explain the differences between the two papers, which are not explicitly stated in the JPD paper. The main objective of the JAP paper is to calculate the thermal contact resistance of the nanosized contact spots in multiscale contact. During the process of multiscale analysis, the thermal conductivity varies, especially below the phonon mean free path. The JPD paper deals with the electrical contact resistance in the multiscale contact distribution with an assumption of constant electrical resistivity, which is known as a different kind of physics in a larger characteristic length scale. There are similar figures in the JPD paper and the JAP paper: figures 6, 7 and 8 in the JPD paper and figures 3, 4 and 5 in the JAP paper. Two research works were performed on the basis of a specific microcontact distribution. In the JAP paper, the scale of the contact distribution is in the range of the phonon mean free path of Si, which is a very small size of contact distribution. In the JPD paper, the scale of contact distribution is in the continuum scale, which is larger than the phonon mean free path. In addition, due to the characteristics of a fractal surface which repeatedly generates a similar shape of contact distribution in the different length scales, the shape of contact distribution looks similar, but the total sizes of domain in the JPD and JAP figures are different. The projected areas L × L of fractal surface of the JAP paper and JPD paper are 10 μm × 10 μm and 10 mm × 10 mm, respectively. The length scale is already stated in the JAP paper, but not in the JPD paper. Thus, we have to state that the figures were adapted from the JAP paper without clear

  2. Revisiting mask contact hole measurements

    NASA Astrophysics Data System (ADS)

    Higuchi, Masaru; Gallagher, Emily; Ceperley, Daniel; Brunner, Timothy; Bowley, Reg; McGuire, Anne

    2006-10-01

    Contact holes represent one of the biggest critical dimension (CD) mask metrology challenges for 45nm technology mask development. The challenge is a consequence of both wafer and mask sensitivities. Large mask error factors and the small process windows found when contact holes are imaged on wafers impose very tight mask specifications for CD uniformity. The resultant CD error budget leaves little room for mask metrology. Current advanced mask metrology deploys a CD-SEM to characterize the mask contact hole CD uniformity. Measuring a contact hole is complex since it is inherently two-dimensional and is not always well-characterized by one-dimensional x- and y-axis measurements. This paper will investigate contact metrics such as line edge roughness (LER), region of interest (ROI) size, area, and CD sampling methods. The relative merits of each will be explored. Ultimately, an understanding of the connection between what is physically measured on the mask and what impacts wafer imaging must be understood. Simulations will be presented to explore the printability of a contact hole's physical attributes. The results will be summarized into a discussion of optimal contact hole metrology for 45nm technology node masks.

  3. Elastohydrodynamic lubrication of elliptical contacts

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.

    1981-01-01

    The determination of the minimum film thickness within contact is considered for both fully flooded and starved conditions. A fully flooded conjunction is one in which the film thickness is not significantly changed when the amount of lubricant is increased. The fully flooded results presented show the influence of contact geometry on minimum film thickness as expressed by the ellipticity parameter and the dimensionless speed, load, and materials parameters. These results are applied to materials of high elastic modulus (hard EHL), such as metal, and to materials of low elastic modulus(soft EHL), such as rubber. In addition to the film thickness equations that are developed, contour plots of pressure and film thickness are given which show the essential features of elastohydrodynamically lubricated conjunctions. The crescent shaped region of minimum film thickness, with its side lobes in which the separation between the solids is a minimum, clearly emerges in the numerical solutions. In addition to the 3 presented for the fully flooded results, 15 more cases are used for hard EHL contacts and 18 cases are used for soft EHL contacts in a theoretical study of the influence of lubricant starvation on film thickness and pressure. From the starved results for both hard and soft EHL contacts, a simple and important dimensionless inlet boundary distance is specified. This inlet boundary distance defines whether a fully flooded or a starved condition exists in the contact. Contour plots of pressure and film thickness in and around the contact are shown for conditions.

  4. Contact Pressure and Shear Stress Analysis on Conforming Contact Problem

    NASA Astrophysics Data System (ADS)

    Nagatani, Haruo; Imou, Akitoshi

    Two methods to solve a conforming contact problem are proposed. First method is general and can be applicable to the contact case between elastic arbitrary shape bodies. For verification FEA is performed on the convex-concave sphere contact, and the result of this method is well corresponding to the FEA result. However, the accuracy deteriorates when the mesh aspect ratio is extremely large. This phenomenon is caused by the usage of numerical integration for the calculation of influence coefficient. The second method is devised to avoid this problem, while this improved method is applicable only to the case when the contact area can be considered to be on a cylinder surface. By using this method, the contact pressure can be obtained without the deterioration even in the case of edge load occurring between ball bearing race shoulder and ball. The results of the contact pressure and the shear stress that is necessary for bearing life estimation are compared with the FEA result, which showed well correspondence.

  5. [Contact allergy from cigarette smoking].

    PubMed

    Rat, J P; Larregue, M

    1987-04-01

    Usually, recorded cases of allergic contact dermatitis to tobacco are confined to occupational diseases and involve agricultural workers and those engaged in manufacturing or selling the products, all of whom are in contact with tobacco leaves. We have found three cases of contact dermatitis caused by cigarette smoke, which are not occupational disease. We do not know what offending agent is, but in one case the patient is allergic to perfume and this may be the factor responsible, since she smokes only flavoured cigarettes. In addition, we need to know whether the allergen only appears during combustion and is therefore present only in cigarette smoke.

  6. Allergic contact dermatitis from ketoconazole.

    PubMed

    Liu, Jing; Warshaw, Erin M

    2014-09-01

    Ketoconazole is a widely used imidazole antifungal agent. True contact allergy to topical ketoconazole is rare, and few cases of patients with contact allergy to ketoconazole have been reported. We present the case of a patient with a history of undiagnosed recurrent dermatitis who developed acute facial swelling and pruritus after using ketoconazole cream and shampoo for the treatment of seborrheic dermatitis. Patch testing revealed true contact allergy to ketoconazole without cross-reactivity to 4 other imidazole antifungals. Review of the patient's medical record suggested that prior incidences of dermatitis might have been due to ketoconazole exposure. When the patient avoided this imidazole agent, the dermatitis resolved. PMID:25279470

  7. Starved elastohydrodynamic lubricated elliptical contacts

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.

    1980-01-01

    A theoretical study of the influence of lubricant starvation on film thickness and pressure in hard and soft elliptical elastohydrodynamic contacts is presented. From the results for both hard and soft EHL contacts a simple and important dimensionless inlet boundary distance is specified. This inlet boundary defines whether a fully flooded or a starved condition exists in the contact. Furthermore it is found that the film thickness for a starved condition could be written in dimensionless terms as a function of the inlet distance parameter and the film thickness for a fully flooded condition. Contour plots of pressure and film thickness in and around the contact are shown for fully flooded and starved conditions. The theoretical findings are compared directly with results obtained experimentally.

  8. Contact vitiligo: etiology and treatment.

    PubMed

    Singh, P; Singh, J; Agarwal, U S; Bhargava, R K

    2003-01-01

    Fifty patients of contact vitiligo were studied. Etiological agents of contact vitiligo were identified by clinical history, distribution of lesions and patch testing with suspected material. All patients were advised to avoid the suspected agent and treated with PUVASOL and topical steroid. Out of 50 patients (Male 8%, Female 92% age 14-60 years)., etiological agent of contact vitiligo was found to be sticking bindi alone in 24 (48%), while bindi along with other etiological agents were found to be purse, foot wear, plastic watch strap, lipstick and tooth paste in 14 (28%) cases. 14 (28%) patients also had disseminated lesions of vitiligo along with contact vitiligo. Positive reaction with patch testing was observed in 18 (36%) while depigmentation was seen in 4 (8%) cases. We observed that response of treatment was better in patients with shorter duration of disease while poor response was seen in patients with longer duration of disease. PMID:17642819

  9. Transition metal contacts to graphene

    SciTech Connect

    Politou, Maria De Gendt, Stefan; Heyns, Marc; Asselberghs, Inge; Radu, Iuliana; Conard, Thierry; Richard, Olivier; Martens, Koen; Huyghebaert, Cedric; Tokei, Zsolt; Lee, Chang Seung; Sayan, Safak

    2015-10-12

    Achieving low resistance contacts to graphene is a common concern for graphene device performance and hybrid graphene/metal interconnects. In this work, we have used the circular Transfer Length Method (cTLM) to electrically characterize Ag, Au, Ni, Ti, and Pd as contact metals to graphene. The consistency of the obtained results was verified with the characterization of up to 72 cTLM structures per metal. Within our study, the noble metals Au, Ag and Pd, which form a weaker bond with graphene, are shown to result in lower contact resistance (Rc) values compared to the more reactive Ni and Ti. X-ray Photo Electron Spectroscopy and Transmission Electron Microscopy characterization for the latter have shown the formation of Ti and Ni carbides. Graphene/Pd contacts show a distinct intermediate behavior. The weak carbide formation signature and the low Rc values measured agree with theoretical predictions of an intermediate state of weak chemisorption of Pd on graphene.

  10. [Contact lens-related keratitis].

    PubMed

    Steiber, Zita; Berta, András; Módis, László

    2013-11-10

    Nowadays, keratitis, corneal infection due to wearing contact lens means an increasingly serious problem. Neglected cases may lead to corneal damage that can cause blindness in cases of otherwise healthy eyes. Early diagnosis based on the clinical picture and the typical patient history is an important way of prevention. Prophylaxis is substantial to avoid bacterial and viral infection that is highly essential in this group of diseases. Teaching contact lens wearers the proper contact lens care, storage, sterility, and hygiene regulations is of great importance. In case of corneal inflammation early accurate diagnosis supported by microbiological culture from contact lenses, storage boxes or cornea is very useful. Thereafter, targeted drug therapy or in therapy-resistant cases surgical treatment may even be necessary in order to sustain suitable visual acuity.

  11. Racial Disparity in Police Contacts

    PubMed Central

    Crutchfield, Robert D.; Haggerty, Kevin P.; McGlynn, Anne; Catalano, Richard F.

    2013-01-01

    Criminologists agree the race disparity in arrests cannot be fully explained by differences in criminal behavior. We examine social environment factors that may lead to racial differences in police contact in early adolescence, including family, peers, school, and community. Data are from 331 8th-grade students. Blacks were almost twice as likely as Whites to report a police contact. Blacks reported more property crime but not more violent crime than Whites. Police contacts were increased by having a parent who had been arrested, a sibling involved in criminal activity, higher observed reward for negative behavior, having school disciplinary actions, and knowing adults who engaged in substance abuse or criminal behavior. Race differences in police contacts were partially attributable to more school discipline. PMID:24363956

  12. Contact allergy to oleamidopropyl dimethylamine.

    PubMed

    de Groot, A G; Liem, D H

    1984-11-01

    Contact allergy to the cationic emulsifier oleamidopropyl dimethylamine was demonstrated in 3 patients. In every case the emulsifier was present in a particular brand of body lotion. Patch test concentrations of 0.1% and 0.5% in water are proposed; slightly higher concentrations may induce irritant responses. Although these are the first documented cases of contact allergy to oleamidopropyl dimethylamine, it is argued that hypersensitivity to this compound may not be rare.

  13. Pose and motion from contact

    SciTech Connect

    Jia, Y.B.; Erdmann, M.

    1999-05-01

    In the absence of vision, grasping an object often relies on tactile feedback from the fingertips. As the finger pushes the object, the fingertip can feel the contact point move. If the object is known in advance, from this motion the finger may infer the location of the contact point on the object, and thereby, the object pose. This paper primarily investigates the problem of determining the pose (orientation and position) and motion (velocity and angular velocity) of a planar object with known geometry from such contact motion generated by pushing. A dynamic analysis of pushing yields a nonlinear system that relates through contact the object pose and motion to the finger motion. The contact motion on the fingertip thus encodes certain information about the object pose. Nonlinear observability theory is employed to show that such information is sufficient for the finger to observe not only the pose, but also the motion of the object. Therefore, a sensing strategy can be realized as an observer of the nonlinear dynamic system. Two observers are subsequently introduced. The first observer, based on the work of Gautheir, Hammouri, and Othman (1992), has its gain determined by the solution of a Lyapunov-like equation; it can be activated at any time instant during a push. The second observer, based on Newton`s method, solves for the initial (motionless) object pose from three intermediate contact points during a push. Under the Coulomb-friction model, the paper deals with support friction in the plane and/or contact friction between the finger and the object. Extensive simulations have been done to demonstrate the feasibility of the two observers. Preliminary experiments (with an Adept robot) have also been conducted. A contact sensor has been implemented using strain gauges.

  14. [Contact sensitization to external agents].

    PubMed

    Erdmann, S M; Merk, H-F

    2003-04-01

    The following review describes contact sensitization to topically applied medications--especially topical dermatological agents--and to external agents in the broadest sense. Particularly skin care products constitute a special source for sensitization due to their widespread use. Especially fragrances and preservatives in cosmetics play an important global role in eliciting contact allergies. Because of the extremely broad spectrum covered by the active and adjuvant ingredients contained in external agents, the following discussion focuses on specific substance groups.

  15. Contact sensitivity to oak moss.

    PubMed

    Gonçalo, S; Cabral, F; Gonçalo, M

    1988-11-01

    Oak moss allergy was the principle allergen in contact sensitivity to perfumes (45%); 31 patients reacting to oak moss were studied. The sensitivity was attributed to contact with perfumes in 20, lichens in 7 and unknown in 4. Atranorin was the most frequent allergen, followed by usnic, evernic and fumarprotocetraric acids. Concomitant allergy occurred to several lichen acids and also to balsam of Peru, colophony and other fragrance components.

  16. Method for lubricating contacting surfaces

    SciTech Connect

    Dugger, Michael T.; Ohlhausen, James A.; Asay, David B.; Kim, Seong H.

    2011-12-06

    A method is provided for tribological lubrication of sliding contact surfaces, where two surfaces are in contact and in motion relative to each other, operating in a vapor-phase environment containing at least one alcohol compound at a concentration sufficiently high to provide one monolayer of coverage on at least one of the surfaces, where the alcohol compound continuously reacts at the surface to provide lubrication.

  17. Contact sensitivity to oak moss.

    PubMed

    Gonçalo, S; Cabral, F; Gonçalo, M

    1988-11-01

    Oak moss allergy was the principle allergen in contact sensitivity to perfumes (45%); 31 patients reacting to oak moss were studied. The sensitivity was attributed to contact with perfumes in 20, lichens in 7 and unknown in 4. Atranorin was the most frequent allergen, followed by usnic, evernic and fumarprotocetraric acids. Concomitant allergy occurred to several lichen acids and also to balsam of Peru, colophony and other fragrance components. PMID:3233955

  18. Mechanisms of rolling contact spalling

    NASA Technical Reports Server (NTRS)

    Kumar, A. M.; Kulkarni, S. M.; Bhargava, V.; Hahn, G. T.; Rubin, C. A.

    1987-01-01

    The results of a study aimed at analyzing the mechanical material interactions responsible for rolling contact spalling of the 440 C steel, high pressure oxygen turbopump bearings are presented. A coupled temperature displacement finite element analysis of the effects of friction heating under the contact is presented. The contact is modelled as a stationary, heat generating, 2 dimensional indent in an elastic perfectly plastic half-space with heat fluxes up to 8.6 x 10000 KW/m sq comparable to those generated in the bearing. Local temperatures in excess of 1000 C are treated. The calculations reveal high levels of residual tension after the contact is unloaded and cools. Efforts to promote Mode 2/Mode 3 fatigue crack growth under cyclic torsion in hardened 440 C steel are described. Spalls produced on 440 C steel by a 3 ball/rod rolling contact testing machine were studied with scanning microscopy. The shapes of the cyclic, stress strain hysteresis loops displayed by hardened 440 C steel in cyclic torsion at room temperature are defined for the plastic strain amplitudes encountered in rolling/sliding contact. Results of these analyses are discussed in detail.

  19. Crane-Load Contact Sensor

    NASA Technical Reports Server (NTRS)

    Youngquist, Robert; Mata, Carlos; Cox, Robert

    2005-01-01

    An electronic instrument has been developed as a prototype of a portable crane-load contact sensor. Such a sensor could be helpful in an application in which the load rests on a base in a horizontal position determined by vertical alignment pins (see Figure 1). If the crane is not positioned to lift the load precisely vertically, then the load can be expected to swing once it has been lifted clear of the pins. If the load is especially heavy, large, and/or fragile, it could hurt workers and/or damage itself and nearby objects. By indicating whether the load remains in contact with the pins when it has been lifted a fraction of the length of the pins, the crane-load contact sensor helps the crane operator determine whether it is safe to lift the load clear of the pins: If there is contact, then the load is resting against the sides of the pins and, hence, it may not be safe to lift; if contact is occasionally broken, then the load is probably not resting against the pins, so it should be safe to lift. It is assumed that the load and base, or at least the pins and the surfaces of the alignment holes in the load, are electrically conductive, so the instrument can use electrical contact to indicate mechanical contact. However, DC resistance cannot be used as an indicator of contact for the following reasons: The load and the base are both electrically grounded through cables (the load is grounded through the lifting cable of the crane) to prevent discharge of static electricity. In other words, the DC resistance between the load and the pins is always low, as though they were always in direct contact. Therefore, instead of DC resistance, the instrument utilizes the AC electrical impedance between the pins and the load. The signal frequency used in the measurement is high enough (.1 MHz) that the impedance contributed by the cables and the electrical ground network of the building in which the crane and the base are situated is significantly greater than the contact

  20. Partial slip in mesoscale contacts: dependence on contact size.

    PubMed

    Hanke, Sylvia; Petri, Judith; Johannsmann, Diethelm

    2013-09-01

    Using acoustic resonators, we have studied the occurrence and the magnitude of partial slip between glass spheres and polymer surfaces. The measurement relies on the shifts of resonance frequency and bandwidth, Δf and ΔΓ, induced by the contact as well as the dependence of Δf and ΔΓ on the amplitude of oscillation. One often finds a decrease of Δf at elevated amplitudes, which goes back to partial slip (also "microslip"). Building on two different models of partial slip, we derive the frequency-amplitude relation from the force-displacement relation. In accordance with both models, the bandwidth is found to increase with amplitude in the partial slip regime. For the highest amplitudes and largest spheres investigated, one observes a decrease of bandwidth with amplitude, which is interpreted as a transition to gross slip. Deviating from both models of partial slip, Δf is sometimes found to be independent of amplitude in the low-amplitude range. Constant Δf implies linear force-displacement relations. The critical amplitude for the onset of partial slip depends on the contact radius, where partial slip is more pronounced for larger contacts. This finding can be explained by a smooth stress profile at the edge of the contact with no singularity. The stress at the edge might be lowered by nanoscale roughness, by capillary forces, or by the inability of the two surfaces to reestablish a sticking contact at the turning point of the oscillation.

  1. Ferromagnetic tunnel contacts to graphene: Contact resistance and spin signal

    SciTech Connect

    Cubukcu, M.; Laczkowski, P.; Vergnaud, C.; Marty, A.; Attané, J.-P.; Notin, L.; Vila, L. Jamet, M.; Martin, M.-B.; Seneor, P.; Anane, A.; Deranlot, C.; Fert, A.; Auffret, S.; Ducruet, C.

    2015-02-28

    We report spin transport in CVD graphene-based lateral spin valves using different magnetic contacts. We compared the spin signal amplitude measured on devices where the cobalt layer is directly in contact with the graphene to the one obtained using tunnel contacts. Although a sizeable spin signal (up to ∼2 Ω) is obtained with direct contacts, the signal is strongly enhanced (∼400 Ω) by inserting a tunnel barrier. In addition, we studied the resistance-area product (R.A) of a variety of contacts on CVD graphene. In particular, we compared the R.A products of alumina and magnesium oxide tunnel barriers grown by sputtering deposition of aluminum or magnesium and subsequent natural oxidation under pure oxygen atmosphere or by plasma. When using an alumina tunnel barrier on CVD graphene, the R.A product is high and exhibits a large dispersion. This dispersion can be highly reduced by using a magnesium oxide tunnel barrier, as for the R.A value. This study gives insight in the material quest for reproducible and efficient spin injection in CVD graphene.

  2. Contact Lens-Related Eye Infections

    MedlinePlus

    ... Stories Español Eye Health / Eye Health A-Z Contact Lens-Related Eye Infections Sections Contact Lens-Related ... About Contact Lenses Proper Care of Contact Lenses Contact Lens-Related Eye Infections Written by: Kierstan Boyd ...

  3. Measuring The Contact Resistances Of Photovoltaic Cells

    NASA Technical Reports Server (NTRS)

    Burger, D. R.

    1985-01-01

    Simple method devised to measure contact resistances of photovoltaic solar cells. Method uses readily available equipment and applicable at any time during life of cell. Enables evaluation of cell contact resistance, contact-end resistance, contact resistivity, sheet resistivity, and sheet resistivity under contact.

  4. RF Sputtering of Gold Contacts On Niobium

    NASA Technical Reports Server (NTRS)

    Barr, D. W.

    1983-01-01

    Reliable gold contacts are deposited on niobium by combination of RF sputtering and photolithography. Process results in structures having gold only where desired for electrical contact. Contacts are stable under repeated cycling from room temperature to 4.2 K and show room-temperature contact resistance as much as 40 percent below indium contacts made by thermalcompression bonding.

  5. Solar cell with back side contacts

    DOEpatents

    Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J; Wanlass, Mark Woodbury; Clews, Peggy J

    2013-12-24

    A III-V solar cell is described herein that includes all back side contacts. Additionally, the positive and negative electrical contacts contact compoud semiconductor layers of the solar cell other than the absorbing layer of the solar cell. That is, the positive and negative electrical contacts contact passivating layers of the solar cell.

  6. On the structure of contact binaries. I - The contact discontinuity

    NASA Technical Reports Server (NTRS)

    Shu, F. H.; Lubow, S. H.; Anderson, L.

    1976-01-01

    The problem of the interior structure of contact binaries is reviewed, and a simple resolution of the difficulties which plague the theory is suggested. It is proposed that contact binaries contain a contact discontinuity between the lower surface of the common envelope and the Roche lobe of the cooler star. This discontinuity is maintained against thermal diffusion by fluid flow, and the transition layer is thin to the extent that the dynamical time scale is short in comparison with the thermal time scale. The idealization that the transition layer has infinitesimal thickness allows a simple formulation of the structure equations which are closed by appropriate jump conditions across the discontinuity. The further imposition of the standard boundary conditions suffices to define a unique model for the system once the chemical composition, the masses of the two stars, and the orbital separation are specified.

  7. "Contact" of nanoscale stiff films.

    PubMed

    Yang, Fut K; Zhang, Wei; Han, Yougun; Yoffe, Serge; Cho, Yungchi; Zhao, Boxin

    2012-06-26

    We investigated the contact behaviors of a nanoscopic stiff thin film bonded to a compliant substrate and derived an analytical solution for determining the elastic modulus of thin films. Microscopic contact deformations of the gold and polydopamine thin films (<200 nm) coated on polydimethylsiloxane elastomers were measured by indenting a soft tip and analyzed in the framework of the classical plate theory and Johnson-Kendall-Roberts (JKR) contact mechanics. The analysis of this thin film contact mechanics focused on the bending and stretching resistance of thin films and is fundamentally different from conventional indentation measurements where the focus is on the fracture and compression of the films. The analytical solution of the elastic modulus of nanoscopic thin films was validated experimentally using 50 and 100 nm gold thin films coated on polydimethylsiloxane elastomers. The technical application of this analysis was further demonstrated by measuring the elastic modulus of thin films of polydopamine, a recently discovered biomimetic universal coating material. Furthermore, the method presented here is able to quantify the contact behaviors of nanoscopic thin films, effectively providing fundamental design parameters, the elastic modulus, and the work of adhesion, crucial for transferring them effectively into practical applications. PMID:22616836

  8. Elastohydrodynamic lubrication of elliptical contacts

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.

    1982-01-01

    Fully flooded, elastohydrodynamically lubricated, elliptical contacts are discussed. The relevant equations used in the elastohydrodynamic lubrication (EHL) of elliptical contacts are briefly described. Film thickness equations are developed for materials of high elastic modulus, such as metal, and for materials of low elastic modulus, such as rubber. In addition to the film thickness equations that are developed, plots of pressure and film thickness are presented. A theoretical study of the influence of lubricant starvation on film thickness and pressure in hard and soft elliptical elastohydrodynamic contacts is presented. From the results for both hard and soft EHL contacts a simple and important dimensionless inlet boundary distance is specified. It is also found that the film thickness for a starved condition can be written in dimensionless terms as a function of the inlet distance parameter and the film thickness for a fully flooded condition. contour plots of pressure and film thickness in and around the contact are shown for fully flooded and starved conditions. The theoretical findings are compared directly with results obtained experimentally.

  9. Marine Bioinspired Underwater Contact Adhesion.

    PubMed

    Clancy, Sean K; Sodano, Antonio; Cunningham, Dylan J; Huang, Sharon S; Zalicki, Piotr J; Shin, Seunghan; Ahn, B Kollbe

    2016-05-01

    Marine mussels and barnacles are sessile biofouling organisms that adhere to a number of surfaces in wet environments and maintain remarkably strong bonds. Previous synthetic approaches to mimic biological wet adhesive properties have focused mainly on the catechol moiety, present in mussel foot proteins (mfps), and especially rich in the interfacial mfps, for example, mfp-3 and -5, found at the interface between the mussel plaque and substrate. Barnacles, however, do not use Dopa for their wet adhesion, but are instead rich in noncatecholic aromatic residues. Due to this anomaly, we were intrigued to study the initial contact adhesion properties of copolymerized acrylate films containing the key functionalities of barnacle cement proteins and interfacial mfps, for example, aromatic (catecholic or noncatecholic), cationic, anionic, and nonpolar residues. The initial wet contact adhesion of the copolymers was measured using a probe tack testing apparatus with a flat-punch contact geometry. The wet contact adhesion of an optimized, bioinspired copolymer film was ∼15.0 N/cm(2) in deionized water and ∼9.0 N/cm(2) in artificial seawater, up to 150 times greater than commercial pressure-sensitive adhesive (PSA) tapes (∼0.1 N/cm(2)). Furthermore, maximum wet contact adhesion was obtained at ∼pH 7, suggesting viability for biomedical applications. PMID:27046671

  10. Multimodal characterization of contact lenses

    NASA Astrophysics Data System (ADS)

    Marcus, Michael A.; Compertore, David; Gibson, Donald S.; Herbrand, Matthew E.; Ignatovich, Filipp V.

    2015-10-01

    A table top instrument has been designed, constructed and tested to characterize all of the primary optical and physical properties of contact lenses. Measured optical properties include base power, cylinder power, cylindrical axis, prism, refractive index and wavefront aberrations. Measured physical properties include center thickness, lens diameter and lens sagittal depth. The instrument combines a Shack-Hartmann wavefront sensor (SHWS), a machine vision sensor, and a low coherence light interferometer (LCI) all coaxially aligned into a single tabletop unit. The unit includes a cuvette, mounted in a translatable sample chamber for holding the contact lens under test, and it can be configured to measure wet or dry contact lenses. During operation, the vision sensor measures the diameter of the lens, and locates the center of the lens. The lens is then aligned for other measurements. The vision sensor can also measure various alignment marks on the lens, as well as identify any alpha numerical features, which can be used to associate the lens orientation with the measured aberrations. The LCI measures the center thickness, sagittal depth and index of refraction of the contact lens. The base radius of curvature is then calculated using these measured parameters. The SHWS measures the lenses prescription power, including spherical, cylinder, prism, and higher order wavefront aberrations. NIST traceable calibration artifacts are used to calibrate the SHWS, machine vision and LCI modalities. Repeatability measurements on a contact lens in a saline solution are presented.

  11. SARS Patients and Their Close Contacts

    MedlinePlus

    ... Fact Sheet for SARS Patients and Their Close Contacts Format: Select one PDF [256 KB] Recommend on ... that are not now known. What does "close contact" mean? In the context of SARS, close contact ...

  12. 78 FR 14549 - National Contact Center; Information Collection; National Contact Center Customer Evaluation Survey

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-06

    ... ADMINISTRATION National Contact Center; Information Collection; National Contact Center Customer Evaluation Survey AGENCY: Contact Center Services, Federal Citizen Information Center, Office of Citizen Services... requirement regarding the National Contact Center customer evaluation surveys. In this request, the...

  13. Contact dermatitis in a woodworker.

    PubMed

    Correale, Christine E; Marks, James G

    2002-03-01

    Woods are capable of causing allergic or irritant contact dermatitis which typically occurs on the exposed areas of the arms, face, and neck. The allergens found in woods include quinones, stilbenes, phenols, and terpenes. We report an 84-year-old woodworker who developed allergic contact dermatitis from Bolivian rosewood and Cocobolo wood. The patient was patch-tested using the North American Contact Dermatitis Group Standard Tray; 2,6 dimethoxyl 1,4 benzoquinone; and wood that he had been exposed to on a regular basis. Positive patch test reactions occurred to methyldibromo glutaronitrile phenoxyethanol, sodium gold thiosulfate, Bolivian rosewood, and Cocobolo wood. Allergens found in Bolivian rosewood and Cocobolo wood caused this patient's chronic dermatitis, which cleared when he avoided these woods.

  14. Variable reluctance switch avoids contact corrosion and contact bounce

    NASA Technical Reports Server (NTRS)

    Watson, P. C.

    1967-01-01

    Variable reluctance switch avoids contact corrosion and bounce in a hostile environment. It consists of a wire-wound magnetic core and moveable bridge piece that alters the core flux pattern to produce an electrical output useful for switching control media.

  15. Contacts de langues et representations (Language Contacts and Representations).

    ERIC Educational Resources Information Center

    Matthey, Marinette, Ed.

    1997-01-01

    Essays on language contact and the image of language, entirely in French, include: "Representations 'du' contexte et representations 'en' contexte? Eleves et enseignants face a l'apprentissage de la langue" ("Representations 'of' Context or Representations 'in' Context? Students and Teachers Facing Language Learning" (Laurent Gajo); "Le crepuscule…

  16. Dermatitis, contact on the cheek (image)

    MedlinePlus

    ... skin inflammation (dermatitis) on the cheek caused by contact with a substance that produced an allergic reaction (allergen). Contact dermatitis causes redness, itching, and small blisters (vesicles).

  17. Contacts of space--times

    SciTech Connect

    Maia, M.D.

    1981-03-01

    The concept of contact between manifolds is applied to space--times of general relativity. For a given background space--time a contact approximation of second order is defined and interpreted both from the point of view of a metric pertubation and of a higher order tangent manifold. In the first case, an application to the high frequency gravitational wave hypothesis is suggested. In the second case, a constant curvature tangent bundle is constructed and suggested as a means to define a ten parameter local space--time symmetry.

  18. Allergic contact dermatitis and cosmetics.

    PubMed

    Watkins, Shannon; Zippin, Jonathan

    2012-10-01

    Contact dermatitis is a common dermatologic condition that can result from exposure to allergens at home or at work. Cosmetics represent a large diverse group of products that Americans apply to their skin to treat disease or enhance beauty. With increased use of cosmetics, the rate of sensitization to many allergenic components has increased. We review the more common allergens present in cosmetics as well as the types of cosmetics that are known to contain them. With proper education and patch testing, dermatologists will be able to identify contact allergies to cosmetic ingredients and help patients avoid the offending products.

  19. Allergic contact dermatitis and cosmetics.

    PubMed

    Watkins, Shannon; Zippin, Jonathan

    2012-10-01

    Contact dermatitis is a common dermatologic condition that can result from exposure to allergens at home or at work. Cosmetics represent a large diverse group of products that Americans apply to their skin to treat disease or enhance beauty. With increased use of cosmetics, the rate of sensitization to many allergenic components has increased. We review the more common allergens present in cosmetics as well as the types of cosmetics that are known to contain them. With proper education and patch testing, dermatologists will be able to identify contact allergies to cosmetic ingredients and help patients avoid the offending products. PMID:23259208

  20. Non- contacting capacitive diagnostic device

    DOEpatents

    Ellison, Timothy

    2005-07-12

    A non-contacting capacitive diagnostic device includes a pulsed light source for producing an electric field in a semiconductor or photovoltaic device or material to be evaluated and a circuit responsive to the electric field. The circuit is not in physical contact with the device or material being evaluated and produces an electrical signal characteristic of the electric field produced in the device or material. The diagnostic device permits quality control and evaluation of semiconductor or photovoltaic device properties in continuous manufacturing processes.

  1. Thermal and electrical contact conductance studies

    NASA Technical Reports Server (NTRS)

    Vansciver, S. W.; Nilles, M.

    1985-01-01

    Prediction of electrical and thermal contact resistance for pressed, nominally flat contacts is complicated by the large number of variables which influence contact formation. This is reflected in experimental results as a wide variation in contact resistances, spanning up to six orders of magnitude. A series of experiments were performed to observe the effects of oxidation and surface roughness on contact resistance. Electrical contact resistance and thermal contact conductance from 4 to 290 K on OFHC Cu contacts are reported. Electrical contact resistance was measured with a 4-wire DC technique. Thermal contact conductance was determined by steady-state longitudinal heat flow. Corrections for the bulk contribution ot the overall measured resistance were made, with the remaining resistance due solely to the presence of the contact.

  2. Imaging surface contacts: power law contact distributions and contact stresses in quartz, calcite, glass and acrylic plastic

    NASA Astrophysics Data System (ADS)

    Dieterich, James H.; Kilgore, Brian D.

    1996-05-01

    A procedure has been developed to obtain microscope images of regions of contact between roughened surfaces of transparent materials, while the surfaces are subjected to static loads or undergoing frictional slip. Static loading experiments with quartz, calcite, soda-lime glass and acrylic plastic at normal stresses to 30 MPa yield power law distributions of contact areas from the smallest contacts that can be resolved (3.5 μm 2) up to a limiting size that correlates with the grain size of the abrasive grit used to roughen the surfaces. In each material, increasing normal stress results in a roughly linear increase of the real area of contact. Mechanisms of contact area increase are by growth of existing contacts, coalescence of contacts and appearance of new contacts. Mean contacts stresses are consistent with the indentation strength of each material. Contact size distributions are insensitive to normal stress indicating that the increase of contact area is approximately self-similar. The contact images and contact distributions are modeled using simulations of surfaces with random fractal topographies. The contact process for model fractal surfaces is represented by the simple expedient of removing material at regions where surface irregularities overlap. Synthetic contact images created by this approach reproduce observed characteristics of the contacts and demonstrate that the exponent in the power law distributions depends on the scaling exponent used to generate the surface topography.

  3. Imaging surface contacts: Power law contact distributions and contact stresses in quartz, calcite, glass and acrylic plastic

    USGS Publications Warehouse

    Dieterich, J.H.; Kilgore, B.D.

    1996-01-01

    A procedure has been developed to obtain microscope images of regions of contact between roughened surfaces of transparent materials, while the surfaces are subjected to static loads or undergoing frictional slip. Static loading experiments with quartz, calcite, soda-lime glass and acrylic plastic at normal stresses to 30 MPa yield power law distributions of contact areas from the smallest contacts that can be resolved (3.5 ??m2) up to a limiting size that correlates with the grain size of the abrasive grit used to roughen the surfaces. In each material, increasing normal stress results in a roughly linear increase of the real area of contact. Mechanisms of contact area increase are by growth of existing contacts, coalescence of contacts and appearance of new contacts. Mean contacts stresses are consistent with the indentation strength of each material. Contact size distributions are insensitive to normal stress indicating that the increase of contact area is approximately self-similar. The contact images and contact distributions are modeled using simulations of surfaces with random fractal topographies. The contact process for model fractal surfaces is represented by the simple expedient of removing material at regions where surface irregularities overlap. Synthetic contact images created by this approach reproduce observed characteristics of the contacts and demonstrate that the exponent in the power law distributions depends on the scaling exponent used to generate the surface topography.

  4. Contact symmetries and Hamiltonian thermodynamics

    SciTech Connect

    Bravetti, A.; Lopez-Monsalvo, C.S.; Nettel, F.

    2015-10-15

    It has been shown that contact geometry is the proper framework underlying classical thermodynamics and that thermodynamic fluctuations are captured by an additional metric structure related to Fisher’s Information Matrix. In this work we analyse several unaddressed aspects about the application of contact and metric geometry to thermodynamics. We consider here the Thermodynamic Phase Space and start by investigating the role of gauge transformations and Legendre symmetries for metric contact manifolds and their significance in thermodynamics. Then we present a novel mathematical characterization of first order phase transitions as equilibrium processes on the Thermodynamic Phase Space for which the Legendre symmetry is broken. Moreover, we use contact Hamiltonian dynamics to represent thermodynamic processes in a way that resembles the classical Hamiltonian formulation of conservative mechanics and we show that the relevant Hamiltonian coincides with the irreversible entropy production along thermodynamic processes. Therefore, we use such property to give a geometric definition of thermodynamically admissible fluctuations according to the Second Law of thermodynamics. Finally, we show that the length of a curve describing a thermodynamic process measures its entropy production.

  5. Non-contact ECG monitoring

    NASA Astrophysics Data System (ADS)

    Smirnov, Alexey S.; Erlikh, Vadim V.; Kodkin, Vladimir L.; Keller, Andrei V.; Epishev, Vitaly V.

    2016-03-01

    The research is dedicated to non-contact methods of electrocardiography. The authors describe the routine of experimental procedure and suggest the approach to solving the problems which arise at indirect signal recording. The paper presents the results of experiments conducted by the authors, covers the flow charts of ECG recorders and reviews the drawbacks of filtering methods used in foreign equivalents.

  6. Interfacial closure of contacting surfaces

    NASA Astrophysics Data System (ADS)

    Rieutord, F.; Rauer, C.; Moriceau, H.

    2014-08-01

    Understanding the contact between solid surfaces is a long-standing problem which has a strong impact on the physics of many processes such as adhesion, friction, lubrication and wear. Experimentally, the investigation of solid/solid interfaces remains challenging today, due to the lack of experimental techniques able to provide sub-nanometer scale information on interfaces buried between millimeters of materials. Yet, a strong interest exists improving the modeling of contact mechanics of materials in order to adjust their interface properties (e.g., thermal transport, friction). We show here that the essential features of the residual gap between contacting surfaces can be measured using high energy X-ray synchrotron reflectivity. The presence of this nano-gap is general to the contact of solids. In some special case however, it can be removed when attractive forces take over repulsive contributions, depending on both height and wavelength of asperity distributions (roughness). A criterion for this instability is established in the standard case of van der Waals attractive forces and elastic asperity compression repulsive forces (Hertz model). This collapse instability is confirmed experimentally in the case of silicon direct bonding, using high-energy X-ray synchrotron reflectivity and adhesion energy measurements. The possibility to achieve fully closed interfaces at room temperature opens interesting perspectives to build stronger assemblies with smaller thermal budgets.

  7. Assessing Measures of Contact Theory.

    ERIC Educational Resources Information Center

    Brown, William R.; Patchen, Martin

    This paper consolidates findings from two related studies: William Brown's research on the predictive ability of measures of early and non-high school interracial contact/opportunities that appear to affect interracial attitudes and behaviors in high school; and Martin Patchen's investigation in Indianapolis, Indiana high schools analyzing the…

  8. Electrical contact tool set station

    DOEpatents

    Byers, M.E.

    1988-02-22

    An apparatus is provided for the precise setting to zero of electrically conductive cutting tools used in the machining of work pieces. An electrically conductive cylindrical pin, tapered at one end to a small flat, rests in a vee-shaped channel in a base so that its longitudinal axis is parallel to the longitudinal axis of the machine's spindle. Electronic apparatus is connected between the cylindrical pin and the electrically conductive cutting tool to produce a detectable signal when contact between tool and pin is made. The axes of the machine are set to zero by contact between the cutting tool and the sides, end or top of the cylindrical pin. Upon contact, an electrical circuit is completed, and the detectable signal is produced. The tool can then be set to zero for that axis. Should the tool contact the cylindrical pin with too much force, the cylindrical pin would be harmlessly dislodged from the vee-shaped channel, preventing damage either to the cutting tool or the cylindrical pin. 5 figs.

  9. Ultraviolet disinfection of contact lenses.

    PubMed

    Harris, M G; Fluss, L; Lem, A; Leong, H

    1993-10-01

    To evaluate the efficacy of ultraviolet (UV) radiation as a method of disinfecting contact lenses and their storage solutions, we contaminated soft lenses (Bausch & Lomb Optima 38), rigid gas permeable (RGP) lenses (Oxyflow F-30), and their storage solutions with three common bacteria. Escherichia coli (E.c.), Staphylococcus epidermis (S.e.), and Serratia marcescens (S.m.). The storage solutions used were saline solution and RGP conditioning solution. We determined the exposure times to 253.7-nm wavelength UV radiation necessary to disinfect the contact lenses and solutions. The decimal reduction values (D values) found for UV radiation were 10 to 200 hundred times shorter than reported for currently available disinfection systems. For E.c., sterilization was attained after 100 s of exposure. For S.e. and S.m., sterilization occurred after 300 s of exposure. Different contact lens solutions transmit UV radiation to various degrees, with saline solution passing more than 90% of the UV radiation. Thus, our results indicate that UV radiation is an effective and rapid method of disinfecting contact lenses and their storage solutions. PMID:8247487

  10. Ultraviolet disinfection of contact lenses.

    PubMed

    Harris, M G; Fluss, L; Lem, A; Leong, H

    1993-10-01

    To evaluate the efficacy of ultraviolet (UV) radiation as a method of disinfecting contact lenses and their storage solutions, we contaminated soft lenses (Bausch & Lomb Optima 38), rigid gas permeable (RGP) lenses (Oxyflow F-30), and their storage solutions with three common bacteria. Escherichia coli (E.c.), Staphylococcus epidermis (S.e.), and Serratia marcescens (S.m.). The storage solutions used were saline solution and RGP conditioning solution. We determined the exposure times to 253.7-nm wavelength UV radiation necessary to disinfect the contact lenses and solutions. The decimal reduction values (D values) found for UV radiation were 10 to 200 hundred times shorter than reported for currently available disinfection systems. For E.c., sterilization was attained after 100 s of exposure. For S.e. and S.m., sterilization occurred after 300 s of exposure. Different contact lens solutions transmit UV radiation to various degrees, with saline solution passing more than 90% of the UV radiation. Thus, our results indicate that UV radiation is an effective and rapid method of disinfecting contact lenses and their storage solutions.

  11. Prosodic Change and Language Contact

    ERIC Educational Resources Information Center

    McMahon, April

    2004-01-01

    Using evidence from first-hand experimental work and existing studies, Colantoni and Gurlekian take a tentative but encouraging step towards exploring the role of contact in explaining intonational change. Their central question is whether Buenos Aires Spanish intonation is distinctive relative to other varieties of Spanish; and if so, whether…

  12. Computing Contact Stresses In Gear Teeth

    NASA Technical Reports Server (NTRS)

    Oswald, Fred B.; Somprakit, Paisan; Huston, Ronald L.

    1995-01-01

    Improved method of computing contact stresses in gear teeth accounts for complicating effects like those of static and sliding friction. Provides iterative procedure for determination of contact region and nodal contact forces along with contact stresses. Method based on equations and computational procedure incorporating these effects routinely.

  13. Common environmental contact allergens in Singapore.

    PubMed

    Ng, S K

    1990-12-01

    Contact allergens produce three types of reactions. The commonest reaction is allergic contact dermatitis (ACD). The commonest contactants in Singapore causing ACD are, in decreasing order of importance, nickel, fragrances, neomycin, lanolin, colophony, flavine, rubber chemicals, paraphenylenediamine, clioquinol and chromates. Another type of allergic contact reaction is immunologic contact urticaria (ICU). ICU is an IgE mediated mechanisms. Contact allergens causing ICU in Singapore are proteinaceous foodstuffs and rubber latex products. Photoallergic contact dermatitis is occasionally seen in Singapore. The commonest agent is Musk Ambrette, a perfume fixature found in male colognes.

  14. Improved Electrical Contact For Dowhhole Drilling Networks

    DOEpatents

    Hall, David R.; Hall, Jr., H. Tracy; Pixton, David S.; Dahlgren, Scott; Fox, Joe; Sneddon, Cameron

    2005-08-16

    An electrical contact system for transmitting information across tool joints while minimizing signal reflections that occur at the tool joints includes a first electrical contact comprising an annular resilient material. An annular conductor is embedded within the annular resilient material and has a surface exposed from the annular resilient material. A second electrical contact is provided that is substantially equal to the first electrical contact. Likewise, the second electrical contact has an annular resilient material and an annular conductor. The two electrical contacts configured to contact one another such that the annular conductors of each come into physical contact. The annular resilient materials of each electrical contact each have dielectric characteristics and dimensions that are adjusted to provide desired impedance to the electrical contacts.

  15. 75 FR 64732 - Agency Forms Undergoing Paperwork Reduction Act Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-20

    ... Disease Control and Prevention's Consumer Response Service Center, CDC INFO (OMB No. 0920-0753 exp. 10/ 31... Prevention launched CDC-INFO, a consolidated, comprehensive effort to respond to consumer, provider and... phased approach from 2005 to 2008. Management of CDC- INFO services is increasingly guided by...

  16. Chain Of Test Contacts For Integrated Circuits

    NASA Technical Reports Server (NTRS)

    Lieneweg, Udo

    1989-01-01

    Test structure forms chain of "cross" contacts fabricated together with large-scale integrated circuits. If necessary, number of such chains incorporated at suitable locations in integrated-circuit wafer for determination of fabrication yield of contacts. In new structure, resistances of individual contacts determined: In addition to making it possible to identify local defects, enables generation of statistical distributions of contact resistances for prediction of "parametric" contact yield of fabrication process.

  17. Allergic contact dermatitis from carmine.

    PubMed

    Shaw, Daniel W

    2009-01-01

    A 28-year-old woman developed allergic contact dermatitis within 6 to 24 hours exclusively after using carmine-containing eyeshadows and lipsticks. She had both a positive patch test result and a positive antecubital repeated open application test result with carmine 2.5% in petrolatum. Thirty other patients had negative patch test results. Carmine is a widely used pigment derived from gravid cochineal insects. Carminic acid is the source of its color. Only two previous publications describing allergic contact dermatitis from carmine could be found. The ingredient in carmine causing these delayed hypersensitivity reactions has not been studied. In contrast, there are numerous reports of immediate hypersensitivity reactions from carmine, mostly from its use in foods and beverages but also from cosmetics and pharmaceuticals. These are immunoglobulin E-mediated reactions directed against cochineal proteins. PMID:19808007

  18. Contact microscopy with synchrotron radiation

    SciTech Connect

    Panessa-Warren, B.J.

    1985-10-01

    Soft x-ray contact microscopy with synchrotron radiation offers the biologist and especially the microscopist, a way to morphologically study specimens that could not be imaged by conventional TEM, STEM or SEM methods (i.e. hydrated samples, samples easily damaged by an electron beam, electron dense samples, thick specimens, unstained low contrast specimens) at spatial resolutions approaching those of the TEM, with the additional possibility to obtain compositional (elemental) information about the sample as well. Although flash x-ray sources offer faster exposure times, synchrotron radiation provides a highly collimated, intense radiation that can be tuned to select specific discrete ranges of x-ray wavelengths or specific individual wavelengths which optimize imaging or microanalysis of a specific sample. This paper presents an overview of the applications of x-ray contact microscopy to biological research and some current research results using monochromatic synchrotron radiation to image biological samples. 24 refs., 10 figs.

  19. Allergic contact dermatitis from carmine.

    PubMed

    Shaw, Daniel W

    2009-01-01

    A 28-year-old woman developed allergic contact dermatitis within 6 to 24 hours exclusively after using carmine-containing eyeshadows and lipsticks. She had both a positive patch test result and a positive antecubital repeated open application test result with carmine 2.5% in petrolatum. Thirty other patients had negative patch test results. Carmine is a widely used pigment derived from gravid cochineal insects. Carminic acid is the source of its color. Only two previous publications describing allergic contact dermatitis from carmine could be found. The ingredient in carmine causing these delayed hypersensitivity reactions has not been studied. In contrast, there are numerous reports of immediate hypersensitivity reactions from carmine, mostly from its use in foods and beverages but also from cosmetics and pharmaceuticals. These are immunoglobulin E-mediated reactions directed against cochineal proteins.

  20. Contact dermatitis caused by preservatives.

    PubMed

    Yim, Elizabeth; Baquerizo Nole, Katherine L; Tosti, Antonella

    2014-01-01

    Preservatives are biocidal chemicals added to food, cosmetics, and industrial products to prevent the growth of microorganisms. They are usually nontoxic and inexpensive and have a long shelf life. Unfortunately, they commonly cause contact dermatitis. This article reviews the most important classes of preservatives physicians are most likely to encounter in their daily practice, specifically isothiazolinones, formaldehyde and formaldehyde-releasers, iodopropynyl butylcarbamate, methyldibromoglutaronitrile, and parabens. For each preservative mentioned, the prevalence of sensitization, clinical presentation of contact dermatitis, patch testing concentrations, cross reactions, and related legislation will be discussed. Mandatory labeling of preservatives is required in some countries, but not required in others. Until policies are made, physicians and patients must be proactive in identifying potential sensitizers and removing their use. We hope that this article will serve as a guide for policy makers in creating legislation and future regulations on the use and concentration of certain preservatives in cosmetics and industrial products.

  1. Remedial Action Contacts Directory - 1997

    SciTech Connect

    1997-05-01

    This document, which was prepared for the US Department of Energy (DOE) Office of Environmental Restoration (ER), is a directory of 2628 individuals interested or involved in environmental restoration and/or remedial actions at radioactively contaminated sites. This directory contains a list of mailing addresses and phone numbers of DOE operations, area, site, project, and contractor offices; an index of DOE operations, area, site, project, and contractor office sorted by state; a list of individuals, presented by last name, facsimile number, and e-mail address; an index of affiliations presented alphabetically, with individual contacts appearing below each affiliation name; and an index of foreign contacta sorted by country and affiliation. This document was generated from the Remedial Action Contacts Database, which is maintained by the Remedial Action Program Information Center (RAPIC).

  2. Sensing with Superconducting Point Contacts

    PubMed Central

    Nurbawono, Argo; Zhang, Chun

    2012-01-01

    Superconducting point contacts have been used for measuring magnetic polarizations, identifying magnetic impurities, electronic structures, and even the vibrational modes of small molecules. Due to intrinsically small energy scale in the subgap structures of the supercurrent determined by the size of the superconducting energy gap, superconductors provide ultrahigh sensitivities for high resolution spectroscopies. The so-called Andreev reflection process between normal metal and superconductor carries complex and rich information which can be utilized as powerful sensor when fully exploited. In this review, we would discuss recent experimental and theoretical developments in the supercurrent transport through superconducting point contacts and their relevance to sensing applications, and we would highlight their current issues and potentials. A true utilization of the method based on Andreev reflection analysis opens up possibilities for a new class of ultrasensitive sensors. PMID:22778630

  3. Contact charge-transfer lasers

    SciTech Connect

    Dharamsi, A.N.; Tulip, J.

    1981-07-01

    A mechanism for sustaining population inversions in contact charge-transfer complexes in which the ground electronic state is not bound is described. The mechanism relies on picosecond radiationless depletion of the lower laser state. This generates an inversion even when the ground-state potential curve, as plotted against the donor-acceptor distance, is not repulsive vertically below the excited state minimum. Contact charge-transfer lasers would offer high gain, high-energy density, and tunable sources of coherent radiation in the uv and visible. A method for pumping such a laser is examined and applied to the pyrrole-oxygen complex. A rate equation analysis is done and estimates for gain and energy density are presented.

  4. Studies on contact lens materials.

    PubMed

    Alyanak, H; Aksoy, S; Hasirci, N

    1991-02-01

    The development of plastics with the optical properties of glass led promptly to their use as contact lenses and intra-ocular lenses to rectify certain visual defects. Research to improve these polymeric materials is continuous but there is not much in the literature since most of the findings are patented. In this work, polymethyl methacrylate, the most commonly used lens material was chosen as the base material and its co and terpolymers were prepared using 2-hydroxyethyl methacrylate, N-vinyl-2-pyrrolidinone, hexamethyl disiloxane, and polypropylene glycol. The transparency, refractive index, contact angle, density, equilibrium water content, and percent hydration properties were examined. Theoretical values were calculated for linear expansion and oxygen permeation from the density and hydration values.

  5. [Contact allergy to essential oils].

    PubMed

    Selvåg, E; Holm, J O; Thune, P

    1995-11-10

    Ethereal oils are widely used, in food, toothpaste, as flavouring agents in perfumes and cosmetics, and in dermatological treatment, as antiseptics, adstringenta, antipruritic tinctures, lotions and pomades. The use of ethereal oils seems to have increased in recent years, probably due to a growing interest in alternative medicine, and especially aromatherapy. By describing the cases of three patients with allergic contact dermatitis, we wish to point out possible unwanted side effects of using ethereal oils.

  6. Contact | Office of Cancer Genomics

    Cancer.gov

    For more information about the Office of Cancer Genomics, please contact: Office of Cancer Genomics National Cancer Institute 31 Center Drive, 10A07 Bethesda, Maryland 20892-2580 Phone: (301) 451-8027 Fax: (301) 480-4368 Email: ocg@mail.nih.gov *Please note that this site will not function properly in Internet Explorer unless you completely turn off the Compatibility View*

  7. Allergic contact dermatitis from cardamom.

    PubMed

    Mobacken, H; Fregert, S

    1975-06-01

    A case is presented of a confectioner with a chronic hand dermatitis and positive patch test reactions to cardamom and certain terpenoid compounds present in the dried ripe seeds of cardamom. Cardamom is a popular traditional flavouring agent for baked goods and confectionery. Dermatitis from skin exposure to cardamom has to the best of our knowledge not been reported. We report one case of allergic contact dermatitis to cardamom elicited by terpenes present in the seeds.

  8. Contact cooling of the skin

    NASA Astrophysics Data System (ADS)

    Altshuler, G. B.; Zenzie, H. H.; Erofeev, A. V.; Smirnov, M. Z.; Anderson, R. R.; Dierickx, C.

    1999-04-01

    Skin precooling can be used to reduce epidermal thermal damage in laser procedures (such as hair removal) where the target structures are located up to several millimetres below the skin surface. We have developed and experimentally verified a computational model that describes contact precooling of a multilayered skin structure prior to laser irradiation. The skin surface is assumed to be brought into thermal contact with a cold plate made of material with a high thermal conductivity. The approximate analytical solution for the skin temperature is obtained by considering the plate as a local heat sink. The time evolution of temperature (in both the skin and the plate) is simulated numerically to yield the optimal cooling parameters. To experimentally verify the numerical results of the model, we performed direct measurements of skin temperature for contact cooling with a sapphire plate held at several different temperatures in the range +10 to C.

  9. Place learning by mechanical contact.

    PubMed

    Harrison, Steven J; Turvey, Michael T

    2010-05-01

    For some animals (e.g. the night-active wandering spider) the encounters with the habitat that result in place learning are predominantly mechanical. We asked whether place learning limited to mechanical contact, like place learning in general, entails vectors tied to individual landmarks and relations between landmarks. We constructed minimal environments for blindfolded human participants. Landmarks were raised steps. 'Home' was a mechanically indistinct location. Travel was linear. The mechanical contacts were those of walking, stepping, and probing with a soft-tipped cane. Home-orienting activities preceded tests of finding home from a given location with landmarks unchanged or (unbeknown to participants) shifted. In a one-landmark environment, perceived home shifted in the same direction, with the same magnitude, as the shifted landmark. In an environment of two landmarks located in the same direction from home, shifting the further landmark toward home resulted in a change in home's perceived location that preserved the original ratio of distances separating home, nearer landmark, and further landmark. Both findings were invariant over the travel route to the test location and repetitions of testing. It seems, therefore, that for humans (and, perhaps, for wandering spiders), mechanical contact can reveal the vectors and relations specifying places.

  10. Immunotherapy of allergic contact dermatitis.

    PubMed

    Spiewak, Radoslaw

    2011-08-01

    The term 'immunotherapy' refers to treating diseases by inducing, enhancing or suppressing immune responses. As allergy is an excessive, detrimental immune reaction to otherwise harmless environmental substances, immunotherapy of allergic disease is aimed at the induction of tolerance toward sensitizing antigens. This article focuses on the historical developments, present state and future outlook for immunotherapy with haptens as a therapeutic modality for allergic contact dermatitis. Inspired by the effectiveness of immunotherapy in respiratory allergies, attempts were undertaken at curing allergic contact dermatitis by means of controlled administration of the sensitizing haptens. Animal and human experiments confirmed that tolerance to haptens can be induced most effectively when the induction of tolerance precedes attempted sensitization. In real life, however, therapy is sought by people who are already sensitized and an effective reversal of hypersensitivity seems more difficult to achieve. Decades of research on Rhus hypersensitivity led to a conclusion that immunotherapy can suppress Rhus dermatitis, however, only to a limited degree, for a short period of time, and at a high risk of side effects, which makes this method therapeutically unprofitable. Methodological problems with most available studies of immunotherapy of contact allergy to nickel make any definite conclusions impossible at this stage.

  11. Common contact sensitizers in Delhi.

    PubMed

    Singhal, V; Reddy, B S

    2000-07-01

    Seventy-five patients of both sexes with clinically suspected contact dermatitis were patch tested with the Indian Standard Series and indigenous antigens. The results were compared with the data from other centers. Most of these patients were young adults between 20 and 39 yrs old with the mean age of 36.63 +/- 5.6 yrs. Their occupational profiles included household workers (17.33%), masons (10.66%), farmers (6.66%), factory workers (4%), medical personnel (4%), lab workers (2.66%), and miscellaneous (17.33%). Itching and burning were two of the most common complaints, and chronic dermatitis was the predominant morphologic pattern of the lesions observed. Frequent sites involved included the hands (40.83%), airborne type (22.44%), hands and feet (12.24%), feet (12.24%), face (10.2%), and neck (2.04%). Patch test analysis of these patients revealed that, out of 75 subjects tested, 49 (65.3%) reacted to one or more allergens. Parthenium (20%) is the most common contact sensitizer followed by potassium dichromate (16%), xanthium (13.33%), nickel sulphate (12%), chrysanthemum (8%), mercaptobenzothiazole, and garlic (6.66% each). These findings are in broad conformity with those in other reports. We concluded that the Indian Standard Series of antigens with the addition of a few more (such as garlic, onion and chlorheximide of local relevance) is suitable for detecting the allergens responsible for the contact dermatitis prevailing in this region. PMID:10935340

  12. Rethinking contact lens associated keratitis.

    PubMed

    Efron, Nathan; Morgan, Philip B

    2006-09-01

    This review presents a critical analysis of the literature relating to the use of binomial and polynomial classification schemes for categorising corneal infiltrative events (CIEs) associated with contact lens wear and the epidemiology of such events. The results of the Manchester Keratitis Study-a 12-month, prospective, hospital-based epidemiological study of contact lens wearer suffering from CIEs-are used as a tool to challenge and test traditional thinking in relation to contact lens associated keratitis. An innovative aspect of this study is the use of a novel clinical severity matrix to systematically score the severity of CIEs based on 10 key signs and symptoms. The ambiguities inherent in using binomial classification schemes (such as, microbial versus sterile, ulcerative versus non-ulcerative etcetera) are highlighted. The failure of a polynomial scheme-due to extensive classification overlap between proposed sub-types of CIEs-is demonstrated using a Venn diagram. A cartographic analysis reveals that infiltrates tend to occur in the superior cornea of patients wearing extended wear silicone hydrogel lenses, in the central cornea of patients wearing daily wear hydrogel daily disposable lenses and in the peripheral cornea of patients wearing daily wear hydrogel (excluding daily disposable) lenses. Infiltrates that occur more towards the limbus are less severe. The incidence of CIEs is higher when contact lenses are worn overnight. Logistic analysis reveals that the risk of developing a severe CIE is five times greater with conventional hydrogel extended wear versus silicone hydrogel extended wear. The male gender, smoking, a healthy eye and body, and the late Winter months are associated with an increased risk of developing CIEs. The rate of significant visual loss as a result of developing a CIE is low. Two key conclusions are drawn from this work, which represent a radical rethinking of this potentially sight-threatening condition. CIEs should be

  13. Direct-Write Contacts: Metallization and Contact Formation; Preprint

    SciTech Connect

    van Hest, M. F. A. M.; Curtis, C. J.; Miedaner, A.; Pasquarelli, R. M.; Kaydonova, T.; Hersh, P.; Ginley, D. S.

    2008-05-01

    Using direct-write approaches in photovoltaics for metallization and contact formation can significantly reduce the cost per watt of producing photovoltaic devices. Inks have been developed for various materials, such as Ag, Cu, Ni and Al, which can be used to inkjet print metallizations for various kinds of photovoltaic devices. Use of these inks results in metallization with resistivities close to those of bulk materials. By means of inkjet printing a metallization grid can be printed with better resolution, i.e. smaller lines, than screen-printing. Also inks have been developed to deposit transparent conductive oxide films by means of ultrasonic spraying.

  14. Implicit Multibody Penalty-BasedDistributed Contact.

    PubMed

    Xu, Hongyi; Zhao, Yili; Barbic, Jernej

    2014-09-01

    The penalty method is a simple and popular approach to resolving contact in computer graphics and robotics. Penalty-based contact, however, suffers from stability problems due to the highly variable and unpredictable net stiffness, and this is particularly pronounced in simulations with time-varying distributed geometrically complex contact. We employ semi-implicit integration, exact analytical contact gradients, symbolic Gaussian elimination and a SVD solver to simulate stable penalty-based frictional contact with large, time-varying contact areas, involving many rigid objects and articulated rigid objects in complex conforming contact and self-contact. We also derive implicit proportional-derivative control forces for real-time control of articulated structures with loops. We present challenging contact scenarios such as screwing a hexbolt into a hole, bowls stacked in perfectly conforming configurations, and manipulating many objects using actively controlled articulated mechanisms in real time. PMID:26357376

  15. Study of Contact Resistances in Integrated Circuits

    NASA Technical Reports Server (NTRS)

    Buehler, M. G.; Lambe, J.; Suszko, S. F.

    1985-01-01

    Techniques explored in search for rapid, reliable test. Resistances of aluminum/silicon contacts and methods to measure subjects of NASA report. Study with three tasks undertaken to evaluate nature and reliability of large numbers of semiconductor contacts of type now being fabricated in integrated circuits: Develop yield analysis for series strings of contacts using wafer-level electrical measurements, and identify different types of faults by visual inspection; develop wafer-level tests to evaluate reliability of contact strings; and develop mathematical model for current flow in contacts and examine contact region for evidence of micro-alloying.

  16. Contact Dermatitis, Patch Testing, and Allergen Avoidance.

    PubMed

    Burkemper, Nicole M

    2015-01-01

    In patients presenting with a complaint of rash, contact dermatitis is often the underlying diagnosis making it an entity with which health care providers should be familiar. Contact dermatitis can be divided into irritant contact dermatitis and allergic contact dermatitis. In a patient suspected of having allergic contact dermatitis, patch testing can be done to identify specific allergens. Education focused on allergen avoidance and safe products is an integral part of treatment for the contact dermatitis patient. Knowledge of the most common allergens is helpful for clinicians to be able to provide this education.

  17. Solar cell contact formation using laser ablation

    DOEpatents

    Harley, Gabriel; Smith, David D.; Cousins, Peter John

    2015-07-21

    The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline material layer; and forming conductive contacts in the plurality of contact holes.

  18. Solar cell contact formation using laser ablation

    DOEpatents

    Harley, Gabriel; Smith, David; Cousins, Peter

    2012-12-04

    The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline material layer; and forming conductive contacts in the plurality of contact holes.

  19. Solar cell contact formation using laser ablation

    DOEpatents

    Harley, Gabriel; Smith, David D.; Cousins, Peter John

    2014-07-22

    The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline materiat layer; and forming conductive contacts in the plurality of contact holes.

  20. Contact Dermatitis, Patch Testing, and Allergen Avoidance.

    PubMed

    Burkemper, Nicole M

    2015-01-01

    In patients presenting with a complaint of rash, contact dermatitis is often the underlying diagnosis making it an entity with which health care providers should be familiar. Contact dermatitis can be divided into irritant contact dermatitis and allergic contact dermatitis. In a patient suspected of having allergic contact dermatitis, patch testing can be done to identify specific allergens. Education focused on allergen avoidance and safe products is an integral part of treatment for the contact dermatitis patient. Knowledge of the most common allergens is helpful for clinicians to be able to provide this education. PMID:26455061

  1. Low resistance contacts for shallow junction semiconductors

    NASA Technical Reports Server (NTRS)

    Fatemi, Navid S. (Inventor); Weizer, Victor G. (Inventor)

    1994-01-01

    A method of enhancing the specific contact resistivity in InP semiconductor devices and improved devices produced thereby are disclosed. Low resistivity values are obtained by using gold ohmic contacts that contain small amounts of gallium or indium and by depositing a thin gold phosphide interlayer between the surface of the InP device and the ohmic contact. When both the thin interlayer and the gold-gallium or gold-indium contact metallizations are used, ultra low specific contact resistivities are achieved. Thermal stability with good contact resistivity is achieved by depositing a layer of refractory metal over the gold phosphide interlayer.

  2. Thermal Conductances Of Metal Contacts

    NASA Technical Reports Server (NTRS)

    Salerno, L. J.; Kittel, P.; Scherkenbach, F. E.; Spivak, A. L.

    1988-01-01

    Report presents results of measurements of thermal conductances of aluminum and stainless-steel contacts at temperatures from 1.6 to 6.0 K. Measurement apparatus includes gearmotor assembly connected to rocker arm by music wire to load sample pair with forces up to 670 N. Heater placed above upper sample. Germanium resistance thermometers in upper and lower samples measured temperature difference across interface over range of heater powers from 0.1 to 10.0 mW. The thermal conductance calculated from temperature difference. Measurements provide data for prediction of thermal conductances of bolted joints in cryogenic infrared instruments.

  3. Spinal injuries in contact sports.

    PubMed

    Wilson, Joseph B; Zarzour, Robert; Moorman, Claude T

    2006-02-01

    Contact and collision sports such as American football expose the athlete to a wide array of potential injuries. Knee injuries garner much of the attention, but spinal injuries are potentially catastrophic and all levels of medical coverage of football must be knowledgeable and prepared to attend to an athlete with a neck injury. Of the other possible spinal conditions, some resolve on their own, others might require conservative therapy, and still others might require surgical intervention. The spectrum of potential injury is wide, yet the medical team must practice and prepare to treat the possible catastrophic neck injury.

  4. Frictionless contact of aircraft tires

    NASA Technical Reports Server (NTRS)

    Kim, Kyun O.; Tanner, John A.; Noor, Ahmed K.

    1989-01-01

    A computational procedure for the solution of frictionless contact problems of spacecraft tires was developed using a two-dimensional laminated anisotropic shell theory incorporating the effects of variations in material and geometric parameters, transverse shear deformation, and geometric nonlinearities to model the nose-gear tire of a space shuttle. Numerical results are presented for the case when the nose-gear tire is subjected to inflation pressure and pressed against a rigid pavement. The results are compared with experimental results obtained at NASA Langley, demonstrating a high accuracy of the model and the effectiveness of the computational procedure.

  5. [Dermatitis from contact with perfume].

    PubMed

    Piriou-Robaglia, A; Robaglia, J L; Bonérandi, J J

    1990-09-01

    Contact dermatitis essentially involves those areas to which perfume is applied. The mixture of perfumes in the standard battery of the L.C.D.R.G. detects 70 to 80% of sensitised cases. The allergens that are most often involved are oak moss, isoeugenol and cinnamic aldehyde. Prevention of dermatitis requires, at individual level, use of non-perfumed cosmetics and at the industrial level, good observance of the international rules of I.F.R.A., aimed at limiting the frequency of occurrence.

  6. Seeking Contact: Issues to Consider

    NASA Astrophysics Data System (ADS)

    Michaud, M.

    Seeking contact with extraterrestrial intelligence is a species enterprise that should be conducted with our shared interests in mind. We must reflect on the full range of possible outcomes; we cannot opt out of the potential consequences of actions taken by small numbers of our fellow humans. Until we have empirical evidence about alien technological civilizations, we can reason about them only by analogy with our own history and behaviour. Given that record, some degree of prudence is in order. To conduct this debate more rationally, we must free our thinking of excessively binary stereotypes.

  7. [Propolis-induced contact allergy].

    PubMed

    Schuler, T M; Frosch, P J

    1988-03-01

    Six patients with contact dermatitis to propolis are reported (3 women, 3 men; mean age 57 years). All three men had eczema on their hands and had acquired their sensitization in the course of bee keeping. The women had been sensitized by propolis contained in ointments of various kinds. Upon patch testing all six patients reacted to propolis and four also to Peruvian balsam. While ten flavonoids were test-negative, a cinnamic acid ester (1.1-dimethylallyl-3',4'-dihydroxy cinnamic acid ester) isolated both from propolis and from poplar buds was positive in two out of three patients; this may be the major allergen.

  8. Residual contact restraints in cryogenics

    NASA Astrophysics Data System (ADS)

    Cretegny, J. F.; Demonicault, J. M.

    The use of residual stress measurements to evaluate the state of cryogenic turbomachines, whose surfaces are worn by the working conductions in dry contact, is addressed. Their contribution to the understanding of the reasons of possible ruptures is considered. It is stated that residual stress measurements should be used as a complementary tool rather than as input data for models. It is shown, thanks to two examples concerning the ball bearings and splines of the liquid hydrogen turbopump of the Vulcain engine, what can be expected from such techniques. Total exploitation of the results has still to be done, but preliminary results are quite encouraging.

  9. Clean Cities Program Contacts (Fact Sheet)

    SciTech Connect

    Not Available

    2012-03-01

    This fact sheet provides contact information for program staff of the U.S. Department of Energy's Clean Cities program, as well as contact information for the nearly 100 local Clean Cities coalitions across the country.

  10. Protein Residue Contacts and Prediction Methods

    PubMed Central

    Adhikari, Badri

    2016-01-01

    In the field of computational structural proteomics, contact predictions have shown new prospects of solving the longstanding problem of ab initio protein structure prediction. In the last few years, application of deep learning algorithms and availability of large protein sequence databases, combined with improvement in methods that derive contacts from multiple sequence alignments, have shown a huge increase in the precision of contact prediction. In addition, these predicted contacts have also been used to build three-dimensional models from scratch. In this chapter, we briefly discuss many elements of protein residue–residue contacts and the methods available for prediction, focusing on a state-of-the-art contact prediction tool, DNcon. Illustrating with a case study, we describe how DNcon can be used to make ab initio contact predictions for a given protein sequence and discuss how the predicted contacts may be analyzed and evaluated. PMID:27115648

  11. Ensuring Safe Use of Contact Lens Solution

    MedlinePlus

    ... For Consumers Consumer Updates Ensuring Safe Use of Contact Lens Solution Share Tweet Linkedin Pin it More ... back to top Dos and Don'ts for Contact Lens Wearers DO: Always wash your hands before ...

  12. Relaxation damping in oscillating contacts.

    PubMed

    Popov, M; Popov, V L; Pohrt, R

    2015-01-01

    If a contact of two purely elastic bodies with no sliding (infinite coefficient of friction) is subjected to superimposed oscillations in the normal and tangential directions, then a specific damping appears, that is not dependent on friction or dissipation in the material. We call this effect "relaxation damping". The rate of energy dissipation due to relaxation damping is calculated in a closed analytic form for arbitrary axially-symmetric contacts. In the case of equal frequency of normal and tangential oscillations, the dissipated energy per cycle is proportional to the square of the amplitude of tangential oscillation and to the absolute value of the amplitude of normal oscillation, and is dependent on the phase shift between both oscillations. In the case of low frequency tangential oscillations with superimposed high frequency normal oscillations, the dissipation is proportional to the ratio of the frequencies. Generalization of the results for macroscopically planar, randomly rough surfaces as well as for the case of finite friction is discussed. PMID:26549011

  13. Contact Printing of Arrayed Microstructures

    PubMed Central

    Xu, Wei; Luikart, Alicia M.; Sims, Christopher E.; Allbritton, Nancy L.

    2010-01-01

    A novel contact printing method utilizing a sacrificial layer of polyacrylic acid (PAA) was developed to selectively modify the upper surfaces of arrayed microstructures. The method was characterized by printing polystyrene onto SU-8 microstructures to create an improved substrate for a cell-based microarray platform. Experiments measuring cell growth SU-8 arrays modified with polystyrene and fibronectin demonstrated improved growth of NIH 3T3 (93% vs. 38%), HeLa (97% vs. 77%), and HT1080 (76% vs. 20%) cells relative to that for the previously used coating method. In addition, use of the PAA sacrificial layer permitted the printing of functionalized polystyrene, carboxylate polystyrene nanospheres, and silica nanospheres onto the arrays in a facile manner. Finally, a high concentration of extracellular matrix materials (ECM), such as collagen (5 mg/mL) and gelatin (0.1%), was contact printed onto the array structures using as little as 5 μL of the ECM reagent and without the formation of a continuous film bridge across the microstructures. Murine embryonic stem cells cultured on arrays printed with this gelatin-hydrogel remained in an undifferentiated state indicating an adequate surface gelatin layer to maintain these cells over time. PMID:20425106

  14. Lubricant Rheology in Concentrated Contacts

    NASA Technical Reports Server (NTRS)

    Jacobson, B. O.

    1984-01-01

    Lubricant behavior in highly stressed situtations shows that a Newtonian model for lubricant rheology is insufficient for explanation of traction behavior. The oil film build up is predicted by using a Newtonian lubricant model except at high slide to roll ratios and at very high loads, where the nonNewtonian behavior starts to be important already outside the Hertzian contact area. Static and dynamic experiments are reported. In static experiments the pressure is applied to the lubricant more than a million times longer than in an EHD contact. Depending on the pressure-temperature history of the experiment the lubricant will become a crystallized or amorphous solid at high pressures. In dynamic experiments, the oil is in an amorphous solid state. Depending on the viscosity, time scale, elasticity of the oil and the bearing surfaces, the oil film pressure, shear strain rate and the type of lubricant, different properties of the oil are important for prediction of shear stresses in the oil. The different proposed models for the lubricant, which describe it to a Newtonian liquid, an elastic liquid, a plastic liquid and an elastic-plastic solid.

  15. Hydrodynamic Simulations of Contact Binaries

    NASA Astrophysics Data System (ADS)

    Kadam, Kundan; Clayton, Geoffrey C.; Frank, Juhan; Marcello, Dominic; Motl, Patrick M.; Staff, Jan E.

    2015-01-01

    The motivation for our project is the peculiar case of the 'red nova" V1309 Sco which erupted in September 2008. The progenitor was, in fact, a contact binary system. We are developing a simulation of contact binaries, so that their formation, structural, and merger properties could be studied using hydrodynamics codes. The observed transient event was the disruption of the secondary star by the primary, and their subsequent merger into one star; hence to replicate this behavior, we need a core-envelope structure for both the stars. We achieve this using a combination of Self Consistant Field (SCF) technique and composite polytropes, also known as bipolytropes. So far we have been able to generate close binaries with various mass ratios. Another consequence of using bipolytropes is that according to theoretical calculations, the radius of a star should expand when the core mass fraction exceeds a critical value, resulting in interesting consequences in a binary system. We present some initial results of these simulations.

  16. Rolling Contact Fatigue of Ceramics

    SciTech Connect

    Wereszczak, Andrew A; Wang, W.; Wang, Y.; Hadfield, M.; Kanematsu, W.; Kirkland, Timothy Philip; Jadaan, Osama M.

    2006-09-01

    High hardness, low coefficient of thermal expansion and high temperature capability are properties also suited to rolling element materials. Silicon nitride (Si{sub 3}N{sub 4}) has been found to have a good combination of properties suitable for these applications. However, much is still not known about rolling contact fatigue (RCF) behavior, which is fundamental information to assess the lifetime of the material. Additionally, there are several test techniques that are employed internationally whose measured RCF performances are often irreconcilable. Due to the lack of such information, some concern for the reliability of ceramic bearings still remains. This report surveys a variety of topics pertaining to RCF. Surface defects (cracks) in Si{sub 3}N{sub 4} and their propagation during RCF are discussed. Five methods to measure RCF are then briefly overviewed. Spalling, delamination, and rolling contact wear are discussed. Lastly, methods to destructively (e.g., C-sphere flexure strength testing) and non-destructively identify potential RCF-limiting flaws in Si{sub 3}N{sub 4} balls are described.

  17. Obituary--rigid contact lenses.

    PubMed

    Efron, Nathan

    2010-10-01

    Scleral and corneal rigid lenses represented 100 per cent of the contact lens market immediately prior to the invention of soft lenses in the mid-1960s. In the United Kingdom today, rigid lenses comprise 2 per cent of all new lens fits. Low rates of rigid lens fitting are also apparent in 27 other countries which have recently been surveyed. Thus, the 1998 prediction of the author that rigid lenses--also referred to as 'rigid gas permeable' (RGP) lenses or 'gas permeable' (GP) lenses--would be obsolete by the year 2010 has essentially turned out to be correct. In this obituary, the author offers 10 reasons for the demise of rigid lens fitting: initial rigid lens discomfort; intractable rigid lens-induced corneal and lid pathology; extensive soft lens advertising; superior soft lens fitting logistics; lack of rigid lens training opportunities; redundancy of the rigid lens 'problem solver' function; improved soft toric and bifocal/varifocal lenses; limited uptake of orthokeratology; lack of investment in rigid lenses; and the emergence of aberration control soft lenses. Rigid lenses are now being fitted by a minority of practitioners with specialist skills/training. Certainly, rigid lenses can no longer be considered as a mainstream form of contact lens correction. May their dear souls (bulk properties) rest in peace. PMID:20674469

  18. [Mydriasis caused by plant contact].

    PubMed

    Wilhelm, H; Wilhelm, B; Schiefer, U

    1991-01-01

    Uni- or bilateral dilatation of pupils that are not reactive to light and lack miosis in response to 1% pilocarpine may be caused by contact with plants containing alkaloids such as scopolamine and atropine. Other causes of a non-light-reactive dilated pupil, such as Adie's tonic pupil, third nerve palsy and lesion of the mesencephalic pretectal region, must be excluded before testing the iris sphincter reaction to 1% pilocarpine. Among the naturally growing flowers in Germany, deadly nightshade (Atropa belladonna), jimson weed (thornapple, Datura stramonium) and black henbane (Hyoscyamus niger) contain enough alkaloids to cause mydriasis by direct contact. However, in most cases an accidental mydriasis by plants in Germany is caused by Datura arborea taxa, e.g. Datura suaveolens, D. candida, D. aurea and D. sanguinea. They contain up to 0.6% dry weight scopolamine. These plants can grow very large and are often planted in tubs. They have to be cut back each year before the winter. This is typically how the eye is contaminated by parts of the plants, which can cause dilatation of the pupil mimicing a neuroophthalmological disorder.

  19. Allergic contact dermatitis to preservatives.

    PubMed

    Timm-Knudson, Vickie L; Johnson, Janis S; Ortiz, Karel J; Yiannias, James A

    2006-04-01

    In summary, a wide variety of skin care products contain preservatives. Patients who are allergic to one of these preservatives may have either localized or widespread dermatitis. Affected patients may find it difficult to avoid thimerosal without the help of the health care provider because the use of these allergens is so widespread. Patch testing is an invaluable tool for patients who struggle with dermatitis. Antigen-avoidance lists that facilitate patient education about what products to avoid are available from the manufacturers of patch test allergens (for example, TRUE Test or Chemotechnique). These lists are helpful starting points for patients in that they provide general categories (for example, shampoos, soaps, or creams) of products that the patient should avoid. With these printed guidelines alone, patients must read skin care product labels carefully, looking for the names of their allergens as identified by patch tests as well as for any synonyms and cross-reactors of these allergens. Thus, patients may feel overwhelmed by hearing the names of allergens that are long and complex. After an allergen has been identified, the nurse can play a key role in helping patients understand their dermatitis and its management. Nurses are in a unique position to spend time educating patients about how to uncover the sources of specific allergens and, subsequently, how to avoid them. The Contact Allergen Replacement Database can help in this educational process by giving patients a shopping list of specific items that are free of the specific allergens causing their allergic contact dermatitis.

  20. Relaxation damping in oscillating contacts

    PubMed Central

    Popov, M.; Popov, V.L.; Pohrt, R.

    2015-01-01

    If a contact of two purely elastic bodies with no sliding (infinite coefficient of friction) is subjected to superimposed oscillations in the normal and tangential directions, then a specific damping appears, that is not dependent on friction or dissipation in the material. We call this effect “relaxation damping”. The rate of energy dissipation due to relaxation damping is calculated in a closed analytic form for arbitrary axially-symmetric contacts. In the case of equal frequency of normal and tangential oscillations, the dissipated energy per cycle is proportional to the square of the amplitude of tangential oscillation and to the absolute value of the amplitude of normal oscillation, and is dependent on the phase shift between both oscillations. In the case of low frequency tangential oscillations with superimposed high frequency normal oscillations, the dissipation is proportional to the ratio of the frequencies. Generalization of the results for macroscopically planar, randomly rough surfaces as well as for the case of finite friction is discussed. PMID:26549011

  1. Microscale hydrodynamics near moving contact lines

    NASA Technical Reports Server (NTRS)

    Garoff, Stephen; Chen, Q.; Rame, Enrique; Willson, K. R.

    1994-01-01

    The hydrodynamics governing the fluid motions on a microscopic scale near moving contact lines are different from those governing motion far from the contact line. We explore these unique hydrodynamics by detailed measurement of the shape of a fluid meniscus very close to a moving contact line. The validity of present models of the hydrodynamics near moving contact lines as well as the dynamic wetting characteristics of a family of polymer liquids are discussed.

  2. The Impact of Deinstitutionalization on Family Contact.

    ERIC Educational Resources Information Center

    Spreat, Scott; Conroy, James W.

    2002-01-01

    Indices of family contact were reviewed across four cohorts of persons with mental retardation (n=151) who were transferred from a large public institution to small supported living arrangements. Family contact increased subsequent to community placement and these increased levels of contact were maintained for as long as four years. (Contains…

  3. Substantially Oxygen-Free Contact Tube

    NASA Technical Reports Server (NTRS)

    Pike, James F. (Inventor)

    1991-01-01

    A device for arc welding is provided in which a continuously-fed electrode wire is in electrical contact with a contact tube. The contact tube is improved by using a substantially oxygen-free conductive alloy in order to reduce the amount of electrical erosion.

  4. Sinterless Formation Of Contacts On Indium Phosphide

    NASA Technical Reports Server (NTRS)

    Weizer, Victor G.; Fatemi, Navid S.

    1995-01-01

    Improved technique makes it possible to form low-resistivity {nearly equal to 10(Sup-6) ohm cm(Sup2)} electrical contacts on indium phosphide semiconductor devices without damaging devices. Layer of AgP2 40 Angstrom thick deposited on InP before depositing metal contact. AgP2 interlayer sharply reduces contact resistance, without need for sintering.

  5. Techniques for Solution- Assisted Optical Contacting

    NASA Technical Reports Server (NTRS)

    DeVine, Glenn; Ware, Brent; Wuchenich, Danielle M.; Spero, Robert E.; Klipstein, William M.; McKenzie, Kirk

    2012-01-01

    A document discusses a solution-assisted contacting technique for optical contacting. An optic of surface flatness Lambda/20 was successfully contacted with one of moderate surface quality, or Lambda/4. Optics used were both ultra-low expansion (ULE) glass (Lambda/4 and Lambda/20) and fused silica (Lambda/20). A stainless steel template of the intended interferometer layout was designed and constructed with three contact points per optic. The contact points were all on a common side of the template. The entire contacting jig was tilted at about 30 . Thus, when the isopropanol was applied, each optic slid due to gravity, resting on the contact points. All of the contacting was performed in a relatively dusty laboratory. A number of successful contacts were achieved where up to two or three visible pieces of dust could be seen. These were clearly visible due to refraction patterns between the optic and bench. On a number of optics, the final step of dropping isopropyl between the surfaces was repeated until a successful contact was achieved. The new procedures realized in this work represent a simplification for optical contacting in the laboratory. They will both save time and money spent during the contacting process, and research and development phases. The techniques outlined are suitable for laboratory experiments, research, and initial development stages.

  6. Single-contact tunneling thermometry

    DOEpatents

    Maksymovych, Petro

    2016-02-23

    A single-contact tunneling thermometry circuit includes a tunnel junction formed between two objects. Junction temperature gradient information is determined based on a mathematical relationship between a target alternating voltage applied across the junction and the junction temperature gradient. Total voltage measured across the junction indicates the magnitude of the target alternating voltage. A thermal gradient is induced across the junction. A reference thermovoltage is measured when zero alternating voltage is applied across the junction. An increasing alternating voltage is applied while measuring a thermovoltage component and a DC rectification voltage component created by the applied alternating voltage. The target alternating voltage is reached when the thermovoltage is nullified or doubled by the DC rectification voltage depending on the sign of the reference thermovoltage. Thermoelectric current and current measurements may be utilized in place of the thermovoltage and voltage measurements. The system may be automated with a feedback loop.

  7. Contact process with temporal disorder

    NASA Astrophysics Data System (ADS)

    Barghathi, Hatem; Vojta, Thomas; Hoyos, José A.

    2016-08-01

    We investigate the influence of time-varying environmental noise, i.e., temporal disorder, on the nonequilibrium phase transition of the contact process. Combining a real-time renormalization group, scaling theory, and large scale Monte-Carlo simulations in one and two dimensions, we show that the temporal disorder gives rise to an exotic critical point. At criticality, the effective noise amplitude diverges with increasing time scale, and the probability distribution of the density becomes infinitely broad, even on a logarithmic scale. Moreover, the average density and survival probability decay only logarithmically with time. This infinite-noise critical behavior can be understood as the temporal counterpart of infinite-randomness critical behavior in spatially disordered systems, but with exchanged roles of space and time. We also analyze the generality of our results, and we discuss potential experiments.

  8. Allergic contact dermatitis: Sex differences.

    PubMed

    Leyden, J J; Kligman, A M

    1977-12-01

    Using the repeated insult test, Jordan & King (1977) observed that contact sensitization was more readily induced in females than in males. We reviewed data obtained by maximization testing of 185 test substances of which 73 were allergenic. The overall male-female sensitization rates were respectively 9.9 and 9.2%. Only with the weakest allergens (sensitizing one or two subjects of a 25-member panel) was there a possibility of female predominance in that there were twice as many panels having only female reactors as males exclusively. In these instances, the test agents were mainly fragrances. We have concluded that sex differences, in the prevalence of sensitization to particular substances, reflect past exposure and are not due to sex differences.

  9. Contact lenses, migraine, and allodynia

    PubMed Central

    Timucin, Ozgur Bulent; Karadag, Mehmet Fatih; Mehmet, Baykara

    2016-01-01

    Clinical trials and electrophysiologic studies demonstrated increased perceptual sensitivity in patients suffering from migraines. At least, one triggering factor is described in 85% of migraine patients. The aim of this report was to investigate the relationship between contact lens (CL) usage and migraine attacks in two cases. Two patients who were diagnosed with migraine reported that the frequency of migraine attacks increased after they switched to using CL with different base curves (BCs). These two patients, who began using CL with different BCs experienced discomfort and dryness of the eye. The ocular complaints were followed by migraine attacks. CL intolerance was also developed during migraine attack in one of the cases. The frequency of migraine attacks decreased and allodynia relieved significantly when flatter BCs were selected. CL related stimulus could have triggered the migraine attack. CLs should be well fitted in migraine patients with allodynia. PMID:27433037

  10. Contact process with temporal disorder.

    PubMed

    Barghathi, Hatem; Vojta, Thomas; Hoyos, José A

    2016-08-01

    We investigate the influence of time-varying environmental noise, i.e., temporal disorder, on the nonequilibrium phase transition of the contact process. Combining a real-time renormalization group, scaling theory, and large scale Monte-Carlo simulations in one and two dimensions, we show that the temporal disorder gives rise to an exotic critical point. At criticality, the effective noise amplitude diverges with increasing time scale, and the probability distribution of the density becomes infinitely broad, even on a logarithmic scale. Moreover, the average density and survival probability decay only logarithmically with time. This infinite-noise critical behavior can be understood as the temporal counterpart of infinite-randomness critical behavior in spatially disordered systems, but with exchanged roles of space and time. We also analyze the generality of our results, and we discuss potential experiments. PMID:27627250

  11. A record system for contact tracing.

    PubMed Central

    Satin, A

    1977-01-01

    A system for recording information on patients and contacts was developed during a research project designed to measure the effectiveness of contact tracing. The record system has proved valuable in contact tracing, cross-referencing patients and their contacts, defining the characteristics of the patient and contact populations, and providing information for research and management. The value of a standardised system has been accepted by health workers who appreciate that its purpose is to increase efficiency and improve the care of infected persons. By October 1976 health workers in 16 clinics in the United Kingdom had started to use the system. PMID:576849

  12. Contact Stress of Modified Curvilinear Gears

    NASA Astrophysics Data System (ADS)

    Chen, Yi-Cheng; Gu, Ming-Lune

    2010-10-01

    The contact characteristics of a modified curvilinear gear set were investigated based on finite element analysis in this study. Firstly, the mathematical model of the modified curvilinear gears was developed based on the theory of gearing. Then a solid model of a modified curvilinear gear set was built by utilizing computer-aided design software. Finite element analysis enabled us to investigate the contact stress of a contact teeth pair. The variation and distribution of the contact stresses and bending stresses are also studied under different gear design parameters. Finally, illustrative examples were presented to demonstrate the contact characteristics of the modified curvilinear gears.

  13. Complementary Barrier Infrared Detector (CBIRD) Contact Methods

    NASA Technical Reports Server (NTRS)

    Ting, David Z.; Hill, Cory J.; Gunapala, Sarath D.

    2013-01-01

    The performance of the CBIRD detector is enhanced by using new device contacting methods that have been developed. The detector structure features a narrow gap adsorber sandwiched between a pair of complementary, unipolar barriers that are, in turn, surrounded by contact layers. In this innovation, the contact adjacent to the hole barrier is doped n-type, while the contact adjacent to the electron barrier is doped p-type. The contact layers can have wider bandgaps than the adsorber layer, so long as good electrical contacts are made to them. If good electrical contacts are made to either (or both) of the barriers, then one could contact the barrier(s) directly, obviating the need for additional contact layers. Both the left and right contacts can be doped either n-type or ptype. Having an n-type contact layer next to the electron barrier creates a second p-n junction (the first being the one between the hole barrier and the adsorber) over which applied bias could drop. This reduces the voltage drop over the adsorber, thereby reducing dark current generation in the adsorber region.

  14. Salt deposition at particle contact points

    NASA Astrophysics Data System (ADS)

    Nie, Xiaodong; Evitts, Richard W.; Besant, Robert W.; Kennell, Glyn F.

    2015-09-01

    Caking may occur when granular potash fertilizer with a moisture content greater than 0.25 % (w/w) undergoes drying. Since cake strength is proportional to the mass of crystal deposited per unit volume near contact points (and other factors) the modelling of mass deposition near contact points is important. The Young-Laplace equation for the air-salt-solution interface is used to determine the geometry of a 2-D planar saline film between two cubic potash particles. A 2-D theoretical model is developed and applied for ion diffusion and deposition near the contact point during drying. The numerical predictions of ion diffusion in an initially saturated salt illustrate the transient spatial distribution of new KCl deposits along the solid surfaces near the contact line. These results indicate the average salt deposition commences at the air-liquid-solid intersection, where the liquid film is thinnest, and moves toward the particle contact point with increasing area averaged KCl deposits, causing the formation of crystal deposits and bridges near contact points. It is concluded that the average salt deposit height increases inversely with distance from the contact point and decreases with initial contact angle of the contact region, but the deposition is nearly independent of the evaporation or drying rate near each contact region. Caking strength depends on, among other parameters, the amount of salt deposition near contact points.

  15. Towards an optimal contact metal for CNTFETs

    NASA Astrophysics Data System (ADS)

    Fediai, Artem; Ryndyk, Dmitry A.; Seifert, Gotthard; Mothes, Sven; Claus, Martin; Schröter, Michael; Cuniberti, Gianaurelio

    2016-05-01

    Downscaling of the contact length Lc of a side-contacted carbon nanotube field-effect transistor (CNTFET) is challenging because of the rapidly increasing contact resistance as Lc falls below 20-50 nm. If in agreement with existing experimental results, theoretical work might answer the question, which metals yield the lowest CNT-metal contact resistance and what physical mechanisms govern the geometry dependence of the contact resistance. However, at the scale of 10 nm, parameter-free models of electron transport become computationally prohibitively expensive. In our work we used a dedicated combination of the Green function formalism and density functional theory to perform an overall ab initio simulation of extended CNT-metal contacts of an arbitrary length (including infinite), a previously not achievable level of simulations. We provide a systematic and comprehensive discussion of metal-CNT contact properties as a function of the metal type and the contact length. We have found and been able to explain very uncommon relations between chemical, physical and electrical properties observed in CNT-metal contacts. The calculated electrical characteristics are in reasonable quantitative agreement and exhibit similar trends as the latest experimental data in terms of: (i) contact resistance for Lc = ∞, (ii) scaling of contact resistance Rc(Lc); (iii) metal-defined polarity of a CNTFET. Our results can guide technology development and contact material selection for downscaling the length of side-contacts below 10 nm.Downscaling of the contact length Lc of a side-contacted carbon nanotube field-effect transistor (CNTFET) is challenging because of the rapidly increasing contact resistance as Lc falls below 20-50 nm. If in agreement with existing experimental results, theoretical work might answer the question, which metals yield the lowest CNT-metal contact resistance and what physical mechanisms govern the geometry dependence of the contact resistance. However, at

  16. Contact lens sensors in ocular diagnostics.

    PubMed

    Farandos, Nicholas M; Yetisen, Ali K; Monteiro, Michael J; Lowe, Christopher R; Yun, Seok Hyun

    2015-04-22

    Contact lenses as a minimally invasive platform for diagnostics and drug delivery have emerged in recent years. Contact lens sensors have been developed for analyzing the glucose composition of tears as a surrogate for blood glucose monitoring and for the diagnosis of glaucoma by measuring intraocular pressure. However, the eye offers a wider diagnostic potential as a sensing site and therefore contact lens sensors have the potential to improve the diagnosis and treatment of many diseases and conditions. With advances in polymer synthesis, electronics and micro/nanofabrication, contact lens sensors can be produced to quantify the concentrations of many biomolecules in ocular fluids. Non- or minimally invasive contact lens sensors can be used directly in a clinical or point-of-care setting to monitor a disease state continuously. This article reviews the state-of-the-art in contact lens sensor fabrication, their detection, wireless powering, and readout mechanisms, and integration with mobile devices and smartphones. High-volume manufacturing considerations of contact lenses are also covered and a case study of an intraocular pressure contact lens sensor is provided as an example of a successful product. This Review further analyzes the contact lens market and the FDA regulatory requirements for commercialization of contact lens sensors.

  17. Dynamic contact angle measurements on superhydrophobic surfaces

    NASA Astrophysics Data System (ADS)

    Kim, Jeong-Hyun; Kavehpour, H. Pirouz; Rothstein, Jonathan P.

    2015-03-01

    In this paper, the dynamic advancing and receding contact angles of a series of aqueous solutions were measured on a number of hydrophobic and superhydrophobic surfaces using a modified Wilhelmy plate technique. Superhydrophobic surfaces are hydrophobic surfaces with micron or nanometer sized surface roughness. These surfaces have very large static advancing contact angles and little static contact angle hysteresis. In this study, the dynamic advancing and dynamic receding contact angles on superhydrophobic surfaces were measured as a function of plate velocity and capillary number. The dynamic contact angles measured on a smooth hydrophobic Teflon surface were found to obey the scaling with capillary number predicted by the Cox-Voinov-Tanner law, θD3 ∝ Ca. The response of the dynamic contact angle on the superhydrophobic surfaces, however, did not follow the same scaling law. The advancing contact angle was found to remain constant at θA = 160∘, independent of capillary number. The dynamic receding contact angle measurements on superhydrophobic surfaces were found to decrease with increasing capillary number; however, the presence of slip on the superhydrophobic surface was found to result in a shift in the onset of dynamic contact angle variation to larger capillary numbers. In addition, a much weaker dependence of the dynamic contact angle on capillary number was observed for some of the superhydrophobic surfaces tested.

  18. Tear analysis in contact lens wearers.

    PubMed Central

    Farris, R L

    1985-01-01

    Tear analysis in contact lens wearers was compared with tear analysis in aphakics without contact lens wear and normal phakic patients. Subjects were divided into five groups: group 1, aphakic without contact lens; group 2, phakic with daily-wear hard contact lens; group 3, phakic with daily-wear soft contact lens; group 4, phakic with extended-wear soft contact lens; and group 5, aphakic with extended-wear soft contact lens. The experimental groups were compared with age- and sex-matched control groups for statistical analysis of tear variables by means of the Student's t-test. The variables measured were tear osmolarity, tear albumin, and lysozyme and lactoferrin concentrations in basal and reflex tears. Highly significant elevations of tear osmolarity were found in aphakic subjects without contact lenses. Less significant differences in tear osmolarity were found in phakic subjects with hard daily-wear lenses or with extended-wear soft lenses. Tear albumin, lysozyme, and lactoferrin in basal and reflex tears were not significantly different in the different groups of contact lens wearers or in the group of aphakic subjects without contact lenses compared with their control groups. Individual variations in tear albumin, lysozyme, and lactoferrin appeared to be responsible for the inability to demonstrate significant differences in tear composition in association with the wearing of different types of contact lenses. Older and aphakic patients demonstrated a tendency to have increased concentrations of proteins in the tears compared with younger, phakic contact lens wearers and normal controls without contact lenses. PMID:3914131

  19. Technology Transfer: A Contact Sport

    NASA Technical Reports Server (NTRS)

    Paynter, Nina P.

    1995-01-01

    Technology transfer is a dynamic process, involving dynamic people as the bridge between NASA Langley Research Center and the outside world. This bridge, for nonaerospace applications, is known as the Technology Applications Group. The introduction of new innovations and expertise where they are needed occurs through a 'push' and 'pull' process. A 'push' occurs when a new technology is first developed with high commercial potential and then a company is found to licence or further develop the technology. The 'pull' process occurs through problem statements. A company or group will submit a written statement of what they need and the shortcomings of commercially available technology. The Technology Transfer Team (T3) reviews these problem statements and decides where NASA LaRC can offer assistance. A researcher or group of researchers are then identified who can help solve the problem and they are put in contact with the company. Depending upon the situation in either method, a Space Act Agreement (SAA), or outline of the responsibilities for each party, is developed.

  20. Ion transfer in contact electrification

    NASA Astrophysics Data System (ADS)

    Diaz, Arthur F.; Fenzel-Alexander, Debra; Wollmann, Daphne; Eisenberg, A.

    1990-07-01

    The contact charge on polymers is influenced by added organic salts, and the charge is higher when the additive is polymer-bound rather than molecular.'7 In our studies, the presence of an ionomer consisting of a polystyrene random copolymer with pendent N-methylpyridinium toluenesulfonate groups in the host resin produces a positive charge, and the charge is higher than with the molecular analog, 4-ethyl-N-methylpyridinium toluenesulfonate.68 These studies were made with powders, and the charge was activated by rolling the powder with larger sized particles. The charging is attributed to ion transfer, where the toluenesulfonate anion (OTs) transfers from one particle surface to the other, and the proposal is supported by the observation of OTs on the second surface by XPS. l'he different charge levels were attributed to the relative mobilities of the cation and the anion, where in the ionomers, the cation is 'anchored' to the polymer and only OTs is mobile. With the molecular salt, both ions can transfer, although in unequal amounts, thus producing a smaller net charge. We now report our results from the analyses of the charged powders with a Simpson charge spectrometer, which allow us to relate the charge distributions with the charge levels in these materials.

  1. Charmonia in a contact interaction

    NASA Astrophysics Data System (ADS)

    Bedolla, Marco A.; Cobos-Martínez, J. J.; Bashir, Adnan

    2015-09-01

    For the flavor-singlet heavy quark system of charmonia, we compute the masses of the ground state mesons in four different channels: pseudoscalar [ηc(1 S )], vector [J /Ψ (1 S )], scalar [χc0(1P )] and axial vector [χc 1(1 P )], as well as the weak decay constants of the ηc(1 S ) and J /Ψ (1 S ) and the charge radius of ηc(1 S ). The framework for this analysis is provided by a symmetry-preserving Schwinger-Dyson equation (SDE) treatment of a vector×vector contact interaction. The results found for the meson masses and the weak decay constants, for the spin-spin combinations studied, are in fairly good agreement with experimental data and earlier model calculations based upon Schwinger-Dyson and Bethe-Salpeter equations involving sophisticated interaction kernels. The charge radius of ηc(1 S ) is consistent with the results from refined SDE studies and lattice quantum chromodynamics.

  2. Occupational contact dermatitis from propacetamol.

    PubMed

    Szczurko, C; Dompmartin, A; Michel, M; Castel, B; Leroy, D

    1996-11-01

    We report 4 cases of contact sensitization to propacetamol. They presented with lesions on the hands, forearms, crease of the elbows, and neck. They were all sensitized to multiple allergens and 2 of them were atopic. Patch tests to Pro-Dafalgan and propacetamol were positive; sodium citrate and paracetamol were negative. Our cases were similar to those published for the first time by Barbaud in 1995. The only allergen was propacetamol; patch tests with diethyglycine and paracetamol were negative. Propacetamol chlorhydrate is composed of a complex paracetamol-diethylglycine, which probably acts like a hapten capable of inducing cutaneous allergy. It is an occupational allergy affecting nurses who work in surgery departments or post-anesthesia recovery rooms, where high doses of analgesics are widely used. The patients were not allergic to oral paracetamol. Despite the usual precautions, the mixture of propacetamol chlorhydrate and solvent leaks onto the nurses' hands, suggesting that health care workers handling propacetamol chlorhydrate should wear gloves. PMID:9007376

  3. Allergic contact dermatitis to white petrolatum.

    PubMed

    Kang, Hee; Choi, Jun; Lee, Ai-Young

    2004-05-01

    White petrolatum is known for its nonsensitizing and nonirritating properties. Only a few cases of allergic contact dermatitis to white petrolatum have been reported. Although it is a rare event, the finding of contact sensitization to white petrolatum raises the potential problem of its usage of common topical agents or vehicles for patch testing. We herein report a case of allergic contact dermatitis to white petrolatum.

  4. Process design for Al backside contacts

    SciTech Connect

    Chalfoun, L.L.; Kimerling, L.C.

    1995-08-01

    It is known that properly alloyed aluminum backside contacts can improve silicon solar cell efficiency. To use this knowledge to fullest advantage, we have studied the gettering process that occurs during contact formation and the microstructure of the contact and backside junction region. With an understanding of the alloying step, optimized fabrication processes can be designed. To study gettering, single crystal silicon wafers were coated with aluminim on both sides and subjected to heat treatments. Results are described.

  5. Optical contacting for gravity probe star tracker

    NASA Technical Reports Server (NTRS)

    Wright, J. J.; Zissa, D. E.

    1984-01-01

    A star-tracker telescope, constructed entirely of fused silica elements optically contacted together, has been proposed to provide submilliarc-second pointing accuracy for Gravity Probe. A bibliography and discussion on optical contacting (the bonding of very flat, highly polished surfaces without the use of adhesives) are presented. Then results from preliminary experiments on the strength of optical contacts including a tensile strength test in liquid helium are discussed. Suggestions are made for further study to verify an optical contacting method for the Gravity Probe star-tracker telescope.

  6. BISON Contact Improvements CASL FY14 Report

    SciTech Connect

    B. W. Spencer; J. D. Hales; D. R. Gaston; D. A. Karpeev; R. L. Williamson; S. R. Novascone; D. M. Perez; R. J. Gardner; K. A. Gamble

    2014-09-01

    The BISON code is the foundation for multiple fuel performance modeling efforts, and is cur- rently under heavy development. For a variety of fuel forms, the effects of heat conduction across a gap and mechanical contact between components of a fuel system are very significant. It is thus critical that BISON have robust capabilities for enforcement of thermal and mechanical contact. BISON’s solver robustness has generally been quite good before mechanical contact between the fuel and cladding occurs, but there have been significant challenges obtaining converged so- lutions once that contact occurs and the solver begins to enforce mechanical contact constraints. During the current year, significant development effort has been focused on the enforcement of mechanical contact to provide improved solution robustness. In addition to this work to improve mechanical contact robustness, an investigation into ques- tionable results attributable to thermal contact has been performed. This investigation found that the order of integration typically used on the surfaces involved in thermal contact was not suffi- ciently high. To address this problem, a new option was provided to permit the use of a different integration order for surfaces, and new usage recommendations were provided.

  7. Star product and contact Weyl manifold

    NASA Astrophysics Data System (ADS)

    Yoshioka, Akira

    2016-09-01

    Contact algebra is introduced, which is a Lie algebra given as a one-dimesional exrention of a Weyl algebra. A contact Lie algebra bundle called a contact Weyl manifold is considered over a symplectic manifold which contains a Weyl manifold as a subbundle. A relationship is discussed between deformation quantization on s symplectic manifold and a Weyl manifold over the symplectic manifold. The contact Weyl manifold has a canonical connection which gives rise the relation, and is regarded as an extension of Fedosov connection.

  8. Measuring Social Contacts in the Emergency Department

    PubMed Central

    Lowery-North, Douglas W.; Hertzberg, Vicki Stover; Elon, Lisa; Cotsonis, George; Hilton, Sarah A.; Vaughns, Christopher F.; Hill, Eric; Shrestha, Alok; Jo, Alexandria; Adams, Nathan

    2013-01-01

    Background Infectious individuals in an emergency department (ED) bring substantial risks of cross infection. Data about the complex social and spatial structure of interpersonal contacts in the ED will aid construction of biologically plausible transmission risk models that can guide cross infection control. Methods and Findings We sought to determine the number and duration of contacts among patients and staff in a large, busy ED. This prospective study was conducted between 1 July 2009 and 30 June 2010. Two 12-hour shifts per week were randomly selected for study. The study was conducted in the ED of an urban hospital. There were 81 shifts in the planned random sample of 104 (78%) with usable contact data, during which there were 9183 patient encounters. Of these, 6062 (66%) were approached to participate, of which 4732 (78%) agreed. Over the course of the year, 88 staff members participated (84%). A radiofrequency identification (RFID) system was installed and the ED divided into 89 distinct zones structured so copresence of two individuals in any zone implied a very high probability of contact <1 meter apart in space. During study observation periods, patients and staff were given RFID tags to wear. Contact events were recorded. These were further broken down with respect to the nature of the contacts, i.e., patient with patient, patient with staff, and staff with staff. 293,171 contact events were recorded, with a median of 22 contact events and 9 contacts with distinct individuals per participant per shift. Staff-staff interactions were more numerous and longer than patient-patient or patient-staff interactions. Conclusions We used RFID to quantify contacts between patients and staff in a busy ED. These results are useful for studies of the spread of infections. By understanding contact patterns most important in potential transmission, more effective prevention strategies may be implemented. PMID:23990915

  9. Multibody dynamic simulation of knee contact mechanics

    PubMed Central

    Bei, Yanhong; Fregly, Benjamin J.

    2006-01-01

    Multibody dynamic musculoskeletal models capable of predicting muscle forces and joint contact pressures simultaneously would be valuable for studying clinical issues related to knee joint degeneration and restoration. Current three-dimensional multi-body knee models are either quasi-static with deformable contact or dynamic with rigid contact. This study proposes a computationally efficient methodology for combining multibody dynamic simulation methods with a deformable contact knee model. The methodology requires preparation of the articular surface geometry, development of efficient methods to calculate distances between contact surfaces, implementation of an efficient contact solver that accounts for the unique characteristics of human joints, and specification of an application programming interface for integration with any multibody dynamic simulation environment. The current implementation accommodates natural or artificial tibiofemoral joint models, small or large strain contact models, and linear or nonlinear material models. Applications are presented for static analysis (via dynamic simulation) of a natural knee model created from MRI and CT data and dynamic simulation of an artificial knee model produced from manufacturer’s CAD data. Small and large strain natural knee static analyses required 1 min of CPU time and predicted similar contact conditions except for peak pressure, which was higher for the large strain model. Linear and nonlinear artificial knee dynamic simulations required 10 min of CPU time and predicted similar contact force and torque but different contact pressures, which were lower for the nonlinear model due to increased contact area. This methodology provides an important step toward the realization of dynamic musculoskeletal models that can predict in vivo knee joint motion and loading simultaneously. PMID:15564115

  10. What To Know If Your Child Wants Contact Lenses

    MedlinePlus

    ... For More Information Decorative Contact Lenses Contact Lenses Hydrogen Peroxide Solution Consumer Updates Focusing on Contact Lens ... Prescription Is A Must Contact Lens Solutions With Hydrogen Peroxide: To Avoid Injury, Follow All Instructions Five ...

  11. Beta atomic contacts: identifying critical specific contacts in protein binding interfaces.

    PubMed

    Liu, Qian; Kwoh, Chee Keong; Hoi, Steven C H

    2013-01-01

    Specific binding between proteins plays a crucial role in molecular functions and biological processes. Protein binding interfaces and their atomic contacts are typically defined by simple criteria, such as distance-based definitions that only use some threshold of spatial distance in previous studies. These definitions neglect the nearby atomic organization of contact atoms, and thus detect predominant contacts which are interrupted by other atoms. It is questionable whether such kinds of interrupted contacts are as important as other contacts in protein binding. To tackle this challenge, we propose a new definition called beta (β) atomic contacts. Our definition, founded on the β-skeletons in computational geometry, requires that there is no other atom in the contact spheres defined by two contact atoms; this sphere is similar to the van der Waals spheres of atoms. The statistical analysis on a large dataset shows that β contacts are only a small fraction of conventional distance-based contacts. To empirically quantify the importance of β contacts, we design βACV, an SVM classifier with β contacts as input, to classify homodimers from crystal packing. We found that our βACV is able to achieve the state-of-the-art classification performance superior to SVM classifiers with distance-based contacts as input. Our βACV also outperforms several existing methods when being evaluated on several datasets in previous works. The promising empirical performance suggests that β contacts can truly identify critical specific contacts in protein binding interfaces. β contacts thus provide a new model for more precise description of atomic organization in protein quaternary structures than distance-based contacts.

  12. Evaluation of Contact Separation Force Testing as a Screening Methodology for Electrical Socket Contacts

    NASA Technical Reports Server (NTRS)

    Green, Chris; Greenwell, Chris; Brusse, jay; Krus, Dennis; Leidecker, Henning

    2009-01-01

    During system level testing intermittent and permanent open circuit failures of mated, crimp removable, electrical contact pairs were experienced. The root cause of the failures was determined to be low (but not zero) contact forces applied by the socket contact tines against the engaging pin. The low contact force reduces the effectiveness of the wiping action of the socket tines against the pin. The observed failure mode may be produced when insufficient wiping during mate, demate and small relative movement in use allows for the accumulation of debris or insulating films that electrically separate the contact pair. The investigation identified at least three manufacturing process control problems associated with the socket contacts that enabled shipment of contacts susceptible to developing low contact forces: (1) Improper heat treatment of the socket tines resulting in plastic rather than elastic behavior; (2) Overly thinned socket tines at their base resulting in reduced pin retention forces; (3) insufficient screening tests to identify parts susceptible to the aforementioned failure mechanisms. The results from an extensive screening program of socket contacts utilizing the industry standard contact separation force test procedures are described herein. The investigation shows this method to be capable of identifying initially weak sockets. However, sockets whose contact retention forces may degrade during use may not be screened out by pin retention testing alone. Further investigations are required to correlate low contact retention forces with increased electrical contact resistance in the presence of insulating films that may accumulate in the use environment.

  13. Proposed ICDRG Classification of the Clinical Presentation of Contact Allergy.

    PubMed

    Pongpairoj, Korbkarn; Ale, Iris; Andersen, Klaus Ejner; Bruze, Magnus; Diepgen, Thomas L; Elsner, Peter U; Goh, Chee Leok; Goossens, An; Jerajani, Hemangi; Lachapelle, Jean Marie; Lee, Jun Young; Maibach, Howard I; Matsunaga, Kayoko; Nixon, Rosemary; Puangpet, Pailin; Sasseville, Denis; Thaiwat, Supitchaya; McFadden, John P

    2016-01-01

    The International Contact Dermatitis Research Group proposes a classification for the clinical presentation of contact allergy. The classification is based primarily on the mode of clinical presentation. The categories are direct exposure/contact dermatitis, mimicking or exacerbation of preexisting eczema, multifactorial dermatitis including allergic contact dermatitis, by proxy, mimicking angioedema, airborne contact dermatitis, photo-induced contact dermatitis, systemic contact dermatitis, noneczematous contact dermatitis, contact urticaria, protein contact dermatitis, respiratory/mucosal symptoms, oral contact dermatitis, erythroderma/exfoliative dermatitis, minor forms of presentation, and extracutaneous manifestations. PMID:27608064

  14. Contact dermatitis to white petrolatum.

    PubMed

    Kundu, Roopal V; Scheman, Andrew J; Gutmanovich, Artem; Hernandez, Claudia

    2004-01-01

    A 31-year-old Caucasian woman presented with a 20-year history of presumed atopic dermatitis. She complained of severe pruritus and the presence of extensive patches of erythema and scale. Her previous treatments included: multiple topical corticosteroids, tacrolimus 0.1% ointment, pimecrolimus 1% cream, and cyclosporine with no improvement of her symptoms. Her past medical history was unremarkable and she was on no other oral medications, including over-the-counter products. On physical examination, multiple erythematous, scaly patches were present on the chest, abdomen,back, and upper extremities. Lichenification of both antecubital fossa was present. Extensive excoriations on her arms and abdomen were also noted. Although the patient had a long-standing history of presumed atopic dermatitis, she had never undergone a skin biopsy. A skin biopsy was performed which demonstrated a perivascular lymphocytic infiltrate with eosinophils and dermal edema (Figures 1, 2). The biopsy was suggestive of possible hypersensitivity dermatitis. The patient then underwent patch testing. The following patch tests were applied to normal back skin using IQ chambers:North American Contact Dermatitis Group (NACDG) expanded standard, textile, fragrance trays, and ingredients found in her products (Chemotechnique, Malmo, Sweden). A total of 89 patches were applied, removed at 48 hours, and read both at 48 and 96 hours. At 48 hours, a total of 70 allergens were positive, 69 of those allergens were in a petrolatum vehicle. There were 50, 3+ reactions to sites of allergens in petrolatum (Figure 3). There were only two sites with petrolatum that were negative: budesonide (a corticosteroid) and melamine formaldehyde. In contrast, all of the sites where there were allergens in liquid vehicles were negative, with the exception of a 1+ reaction to cocamidopropyl betaine. At 48 hours,four additional patch tests were applied to plain petrolatum. Two of these patches were in plastic IQ chambers

  15. 2 CFR 220.45 - Information contact.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false Information contact. 220.45 Section 220.45 Grants and Agreements OFFICE OF MANAGEMENT AND BUDGET CIRCULARS AND GUIDANCE Reserved COST PRINCIPLES FOR... part may be obtained by contacting the Office of Federal Financial Management, Office of Management...

  16. Client Contact versus Paperwork: A Student Perspective.

    ERIC Educational Resources Information Center

    Strohmer, Douglas C.; And Others

    1979-01-01

    Surveys master's level rehabilitation counseling students and examines percentage of time students spend involved in client contact and paperwork during their internship. Time spent in client contact was nearly double that spent doing paperwork for this group. Data from a number of settings are discussed. (Author)

  17. Effects of insoles contact on static balance.

    PubMed

    Shin, Ju Yong; Ryu, Young Uk; Yi, Chae Woo

    2016-04-01

    [Purpose] This study examined the effect of the degree of the contact area between the insoles and soles on static balance. [Subjects and Methods] Thirteen healthy male and female adults voluntarily participated. All of the subjects wore three different types of insoles (no orthotic insole, partial contact, full contact) in the present experiment. The subjects were instructed to place both feet parallel to each other and maintain static balance for 30 seconds. Center of pressure parameters (range, total distance, and mean velocity) were analyzed. [Results] The results show that the anteroposterior range and mediolateral (ML) total distance and velocity decreased when orthotic insoles with partial contact or full contact were used in comparison to when a flat insole (no orthotic insole) was used. Also, the ML range and total distance were lower with full contact than in the other two conditions. These results indicate that static balance improves as the degree of contact between the soles and insoles increases. [Conclusion] The results of this study suggests that using insoles with increased sole contact area would improve static balance ability.

  18. Effects of insoles contact on static balance

    PubMed Central

    Shin, Ju Yong; Ryu, Young Uk; Yi, Chae Woo

    2016-01-01

    [Purpose] This study examined the effect of the degree of the contact area between the insoles and soles on static balance. [Subjects and Methods] Thirteen healthy male and female adults voluntarily participated. All of the subjects wore three different types of insoles (no orthotic insole, partial contact, full contact) in the present experiment. The subjects were instructed to place both feet parallel to each other and maintain static balance for 30 seconds. Center of pressure parameters (range, total distance, and mean velocity) were analyzed. [Results] The results show that the anteroposterior range and mediolateral (ML) total distance and velocity decreased when orthotic insoles with partial contact or full contact were used in comparison to when a flat insole (no orthotic insole) was used. Also, the ML range and total distance were lower with full contact than in the other two conditions. These results indicate that static balance improves as the degree of contact between the soles and insoles increases. [Conclusion] The results of this study suggests that using insoles with increased sole contact area would improve static balance ability. PMID:27190460

  19. Data Qualification Report: Borehole Straigraphic Contacts

    SciTech Connect

    R.W. Clayton; C. Lum

    2000-04-18

    The data set considered here is the borehole stratigraphic contacts data (DTN: M09811MWDGFM03.000) used as input to the Geologic Framework Model. A Technical Assessment method used to evaluate these data with a two-fold approach: (1) comparison to the geophysical logs on which the contacts were, in part, based; and (2) evaluation of the data by mapping individual units using the entire data set. Qualification of the geophysical logs is being performed in a separate activity. A representative subset of the contacts data was chosen based on importance of the contact and representativeness of that contact in the total data set. An acceptance window was established for each contact based on the needs of the data users. Data determined to be within the acceptance window were determined to be adequate for their intended use in three-dimensional spatial modeling and were recommended to be Qualified. These methods were chosen to provide a two-pronged evaluation that examines both the origin and results of the data. The result of this evaluation is a recommendation to qualify all contacts. No data were found to lie outside the pre-determined acceptance window. Where no geophysical logs are available, data were evaluated in relation to surrounding data and by impact assessment. These data are also recommended to be qualified. The stratigraphic contact data contained in this report (Attachment VII; DTN: M00004QGFMPICK.000) are intended to replace the source data, which will remain unqualified.

  20. 15 CFR 23.2 - Contact person.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Contact person. 23.2 Section 23.2 Commerce and Foreign Trade Office of the Secretary of Commerce USE OF PENALTY MAIL IN THE LOCATION AND RECOVERY OF MISSING CHILDREN § 23.2 Contact person. Tim Coss, Office of Administrative Services...

  1. 15 CFR 23.2 - Contact person.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Contact person. 23.2 Section 23.2 Commerce and Foreign Trade Office of the Secretary of Commerce USE OF PENALTY MAIL IN THE LOCATION AND RECOVERY OF MISSING CHILDREN § 23.2 Contact person. Tim Coss, Office of Administrative Services...

  2. 15 CFR 23.2 - Contact person.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Contact person. 23.2 Section 23.2 Commerce and Foreign Trade Office of the Secretary of Commerce USE OF PENALTY MAIL IN THE LOCATION AND RECOVERY OF MISSING CHILDREN § 23.2 Contact person. Tim Coss, Office of Administrative Services...

  3. 15 CFR 23.2 - Contact person.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Contact person. 23.2 Section 23.2 Commerce and Foreign Trade Office of the Secretary of Commerce USE OF PENALTY MAIL IN THE LOCATION AND RECOVERY OF MISSING CHILDREN § 23.2 Contact person. Tim Coss, Office of Administrative Services...

  4. 15 CFR 23.2 - Contact person.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Contact person. 23.2 Section 23.2 Commerce and Foreign Trade Office of the Secretary of Commerce USE OF PENALTY MAIL IN THE LOCATION AND RECOVERY OF MISSING CHILDREN § 23.2 Contact person. Tim Coss, Office of Administrative Services...

  5. 5 CFR 2600.102 - Contact information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 3 2013-01-01 2013-01-01 false Contact information. 2600.102 Section... AND FUNCTIONS OF THE OFFICE OF GOVERNMENT ETHICS § 2600.102 Contact information. (a) Address. The.... OGE does not have any regional offices. (b) Web site. Information about OGE and its role in...

  6. An experimental analysis of elliptical adhesive contact

    NASA Astrophysics Data System (ADS)

    Sümer, Bilsay; Onal, Cagdas D.; Aksak, Burak; Sitti, Metin

    2010-06-01

    The elliptical adhesive contact is studied experimentally utilizing two hemicylinders of elastomeric poly(dimethylsiloxane) (PDMS). Experimental results are compared with the recent approximate Johnson-Kendall-Roberts (JKR) theory for elliptical contacts, and the deviation of the experiments from this theory is discussed in detail. To do this, the cylinders are placed with different skew angles with respect to each other in order to emulate the effect of orientation. The maximum adhesion force and the size of the contact zone are determined experimentally under the action of surface energy. The difference of the maximum adhesion force between experiments and theory is found to increase as the contact area goes from mildly elliptical to slim elliptical contact. Similarly, it is observed that the contact area can be approximated to have elliptical geometry for a wide range of skew angles while a deviation is observed for slim elliptical contacts. Moreover, the reduction in the contact area is observed to be nonself-similar during detachment from an elliptical shape to a circular one.

  7. Consort contact dermatitis due to oak moss.

    PubMed

    Held, J L; Ruszkowski, A M; Deleo, V A

    1988-02-01

    An allergic contact dermatitis in a woman was found to be due to oak moss in her husband's after-shave lotion. When routine patch testing reveals a positive reaction, the dermatologist should consider exposure to the antigen not only in the patient but also through contact with the patient's consort.

  8. Contact dermatitis from an ostomy deodorant.

    PubMed

    Davids, M G; Hodgson, G A; Evans, E

    1978-02-01

    Two patients with contact dermatitis from an ostomy agent are described. Detailed patch testing revealed contact allergic dermatitis to one of the twelve groups of ingredients which largely comprised citronella oil. The problem of dermatitis is discussed in relation to the perfume ingredients of the ostomy agent.

  9. Diglossia and Contact-Induced Language Change

    ERIC Educational Resources Information Center

    Sayahi, Lotfi

    2007-01-01

    The present paper assesses the implications of the existence of two varieties of the same language for contact-induced language change in cases of bilingualism. By analysing the contact between French and Tunisian Arabic, on the one hand, and Spanish and Northern Moroccan Arabic, on the other, the purpose is to illustrate how the coexistence of…

  10. 2 CFR 230.50 - Information contact.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false Information contact. 230.50 Section 230.50 Grants and Agreements OFFICE OF MANAGEMENT AND BUDGET CIRCULARS AND GUIDANCE Reserved COST PRINCIPLES FOR NON-PROFIT ORGANIZATIONS (OMB CIRCULAR A-122) § 230.50 Information contact. Further...

  11. Contact micromechanics in granular media with clay

    SciTech Connect

    Ita, S.L.

    1994-08-01

    Many granular materials, including sedimentary rocks and soils, contain clay particles in the pores, grain contacts, or matrix. The amount and location of the clays and fluids can influence the mechanical and hydraulic properties of the granular material. This research investigated the mechanical effects of clay at grain-to-grain contacts in the presence of different fluids. Laboratory seismic wave propagation tests were conducted at ultrasonic frequencies using spherical glass beads coated with Montmorillonite clay (SWy-1) onto which different fluids were adsorbed. For all bead samples, seismic velocity increased and attenuation decreased as the contact stiffnesses increased with increasing stress demonstrating that grain contacts control seismic transmission in poorly consolidated and unconsolidated granular material. Coating the beads with clay added stiffness and introduced viscosity to the mechanical contact properties that increased the velocity and attenuation of the propagating seismic wave. Clay-fluid interactions were studied by allowing the clay coating to absorb water, ethyl alcohol, and hexadecane. Increasing water amounts initially increased seismic attenuation due to clay swelling at the contacts. Attenuation decreased for higher water amounts where the clay exceeded the plastic limit and was forced from the contact areas into the surrounding open pore space during sample consolidation. This work investigates how clay located at grain contacts affects the micromechanical, particularly seismic, behavior of granular materials. The need for this work is shown by a review of the effects of clays on seismic wave propagation, laboratory measurements of attenuation in granular media, and proposed mechanisms for attenuation in granular media.

  12. A new procedure for measuring contact angle

    SciTech Connect

    Concus, P.; Finn, R.

    1994-05-01

    Described here are some recent work regarding the mathematic design of apparatus that exploits microgravity conditions for accurate experimental determination of contact angle. The underlying motivation for the procedures rests on a discontinuous dependence of the capillary free surface interface S on the contact angle {gamma}, in a cylindrical capillary tube whose section (base) {Omega} contains a protruding corner with opening angle 2{alpha}.

  13. Thin Silicon MEMS Contact-Stress Sensor

    SciTech Connect

    Kotovksy, J; Tooker, A; Horsley, D

    2010-05-28

    This thin, MEMS contact-stress sensor continuously and accurately measures time-varying, solid interface loads over tens of thousands of load cycles. The contact-stress sensor is extremely thin (150 {mu}m) and has a linear output with an accuracy of {+-} 1.5% FSO.

  14. RACIAL CONTACT, PERSONALITY, AND GROUP PROBLEM SOLVING.

    ERIC Educational Resources Information Center

    ABNER, EDWARD V.; LEWIT, DAVID W.

    THIS STUDY TESTS THE HYPOTHESIS THAT BIRACIAL GROUPS IN WHICH RACEMATES WERE PAIRED FOR DIRECT CONTACT WOULD PERFORM BETTER THAN THOSE IN WHICH RACEMATES WERE ISOLATED. IT ALSO ASSUMED THAT ETHNOCENTRIC SUBJECTS WOULD PERFORM BETTER WITH CONTACT WITH A RACEMATE, AND THAT AGGRESSIVE SUBJECTS WOULD GET ALONG WELL WITHOUT IT. THE SUBJECTS WERE BOYS…

  15. ASL or Contact Signing: Issues of Judgment.

    ERIC Educational Resources Information Center

    Lucas, Ceil; Valli, Clayton

    1991-01-01

    Reports on one aspect of an ongoing study of language contact in the American deaf community. The ultimate goal of the study is a linguistic description of contact signing and a reexamination of claims that it is a pidgin. Patterns of language use are reviewed and the role of demographic information in judgments is examined. (29 references) (GLR)

  16. Screen printed interdigitated back contact solar cell

    NASA Astrophysics Data System (ADS)

    Baraona, C. R.; Mazaris, G. A.; Chai, A. T.

    1984-10-01

    Interdigitated back contact solar cells are made by screen printing dopant materials onto the back surface of a semiconductor substrate in a pair of interdigitated patterns. These dopant materials are then diffused into the substrate to form junctions having configurations corresponding to these patterns. Contacts having configurations which match the patterns are then applied over the junctions.

  17. Screen printed interdigitated back contact solar cell

    NASA Technical Reports Server (NTRS)

    Baraona, C. R.; Mazaris, G. A.; Chai, A. T. (Inventor)

    1984-01-01

    Interdigitated back contact solar cells are made by screen printing dopant materials onto the back surface of a semiconductor substrate in a pair of interdigitated patterns. These dopant materials are then diffused into the substrate to form junctions having configurations corresponding to these patterns. Contacts having configurations which match the patterns are then applied over the junctions.

  18. 3-2-1 Contact Teacher's Guide.

    ERIC Educational Resources Information Center

    Children's Television Workshop, New York, NY.

    This guide to the television program 3-2-1 Contact covers 20 theme weeks. The program is designed to bring students into closer contact with the science and technology in their everyday lives. This guide includes: (1) a brief introduction to the contents of each week's shows; (2) a detailed discussion of each week's primary concepts as well as…

  19. Allergic contact dermatitis from azo dyes.

    PubMed

    Su, J C; Horton, J J

    1998-02-01

    Contact allergy to textile dyes usually occurs with disperse dyes of the azo or anthraquinone groups. A case is reported of a woman with clinical features of contact allergy to coloured nylon stockings who had multiple sensitivities to dyes of different azo groups.

  20. Bayesian inference of hidden corrosion in steel bridge connections: Non-contact and sparse contact approaches

    NASA Astrophysics Data System (ADS)

    Earls, C. J.

    2013-12-01

    This paper describes approaches for inferring the presence and nature of hidden corrosion occurring between connection plies in steel truss bridges. The proposed methods furnish, both non-contact and very sparse contact inspection modalities supporting this goal.

  1. CoinFold: a web server for protein contact prediction and contact-assisted protein folding

    PubMed Central

    Wang, Sheng; Li, Wei; Zhang, Renyu; Liu, Shiwang; Xu, Jinbo

    2016-01-01

    CoinFold (http://raptorx2.uchicago.edu/ContactMap/) is a web server for protein contact prediction and contact-assisted de novo structure prediction. CoinFold predicts contacts by integrating joint multi-family evolutionary coupling (EC) analysis and supervised machine learning. This joint EC analysis is unique in that it not only uses residue coevolution information in the target protein family, but also that in the related families which may have divergent sequences but similar folds. The supervised learning further improves contact prediction accuracy by making use of sequence profile, contact (distance) potential and other information. Finally, this server predicts tertiary structure of a sequence by feeding its predicted contacts and secondary structure to the CNS suite. Tested on the CASP and CAMEO targets, this server shows significant advantages over existing ones of similar category in both contact and tertiary structure prediction. PMID:27112569

  2. Large deformation contact mechanics of long rectangular membranes. I. Adhesionless contact

    PubMed Central

    Srivastava, Abhishek; Hui, Chung-Yuen

    2013-01-01

    In part I of this work, we study adhesionless contact of a long rectangular elastic membrane with a rigid substrate. Our model is based on finite strain theory and is valid for arbitrarily large deformations. Both frictionless and no-slip contact conditions are considered. Exact closed form solutions are obtained for frictionless contact. For small contact, the differences between these two contact conditions are small. However, significant differences occur for large contacts. For example, frictionless contact predicts a maximum pressure (and contact region) beyond which there is no solution; while the no-slip model places no restriction on both quantities. The effect of adhesion will be considered in part II of this work. PMID:24353471

  3. Contact lenses and the work environment.

    PubMed

    Mäkitie, J

    1984-01-01

    Controversial opinions have been presented about the use of contact lenses in industrial environments. Work environments contain few obstacles to the use of contact lenses, but many occupations are associated with the risk of excessive difficulties, spoilation , irritation, or complications. From the radiant energy the shorter (280 nm) ultraviolet (UV) wavelengths and the longer (1300 nm) infra-red (IR) wavelengths are absorbed by contact lenses, the absorption increases their temperature and may cause corneal complications. Protective glasses, however, absorb more than 99.5% of the UV and IR energy and thus provide sufficient protection for contact lens wearers exposed to UV or IR radiation. The advantages and risks of contact lenses in industrial work are discussed. PMID:6328841

  4. [Contact lenses permeable to gas. Literature review].

    PubMed

    Livshiys, V S; Popova, T A; Zaikov, G E; Kuś, H

    1989-01-01

    Some medical-technical requirements concerning ophthalmic contact lenses were formulated. A whole series of scientific descriptions of contact lenses was analysed. A short characterization of lenses was given on the basis of PMMA (polymethacrylate of methyl), silicon rubber, poly-2-methacrylic cellulose and cellulose acetate-butyrate; the properties of contact lenses made of materials achieved through a modification of the above-mentioned ones as well as made of new materials were also examined. The problems of transmission of gases of contact lenses were described and the calculations necessary for a minimum of the gas transmittance were mentioned, starting from partial oxygen to the eye cornea. Some ways of solving the problems concerning the insertion of therapeutic substances into contact lenses are described together with prevention of the accumulation of lacrimation fluid protein on their surfaces. PMID:2682577

  5. Avoiding liability in contact lens practice.

    PubMed

    Classé, J G

    1994-01-01

    Contact lens practice is the leading source of liability claims involving optometrists. Claims most often allege negligence, although informed consent or product liability may also be causes of legal claims for damages. For daily wear patients, the most likely causes of claims are nonapproved use of lenses or solutions, monovision contact lenses, negligence by a contact lens technician, failure to verify lenses before dispensing, mismanagement of contact lens-related corneal abrasions, and inadequate monitoring of ocular health. For extended-wear patients, the most common sources of liability claims are inappropriate patient selection, inadequate training of patients, improper wearing schedules, improper management of contact lens-related corneal complications, and inadequate monitoring of ocular health.

  6. Contact gating at GHz frequency in graphene

    PubMed Central

    Wilmart, Q.; Inhofer, A.; Boukhicha, M.; Yang, W.; Rosticher, M.; Morfin, P.; Garroum, N.; Fève, G.; Berroir, J.-M.; Plaçais, B.

    2016-01-01

    The paradigm of graphene transistors is based on the gate modulation of the channel carrier density by means of a local channel gate. This standard architecture is subject to the scaling limit of the channel length and further restrictions due to access and contact resistances impeding the device performance. We propose a novel design, overcoming these issues by implementing additional local gates underneath the contact region which allow a full control of the Klein barrier taking place at the contact edge. In particular, our work demonstrates the GHz operation of transistors driven by independent contact gates. We benchmark the standard channel and novel contact gating and report for the later dynamical transconductance levels at the state of the art. Our finding may find applications in electronics and optoelectronics whenever there is need to control independently the Fermi level and the electrostatic potential of electronic sources or to get rid of cumbersome local channel gates. PMID:26879709

  7. Tear exchange and contact lenses: a review.

    PubMed

    Muntz, Alex; Subbaraman, Lakshman N; Sorbara, Luigina; Jones, Lyndon

    2015-01-01

    Tear exchange beneath a contact lens facilitates ongoing fluid replenishment between the ocular surface and the lens. This exchange is considerably lower during the wear of soft lenses compared with rigid lenses. As a result, the accumulation of tear film debris and metabolic by-products between the cornea and a soft contact lens increases, potentially leading to complications. Lens design innovations have been proposed, but no substantial improvement in soft lens tear exchange has been reported. Researchers have determined post-lens tear exchange using several methods, notably fluorophotometry. However, due to technological limitations, little remains known about tear hydrodynamics around the lens and, to-date, true tear exchange with contact lenses has not been shown. Further knowledge regarding tear exchange could be vital in aiding better contact lens design, with the prospect of alleviating certain adverse ocular responses. This article reviews the literature to-date on the significance, implications and measurement of tear exchange with contact lenses.

  8. Contact gating at GHz frequency in graphene

    NASA Astrophysics Data System (ADS)

    Wilmart, Q.; Inhofer, A.; Boukhicha, M.; Yang, W.; Rosticher, M.; Morfin, P.; Garroum, N.; Fève, G.; Berroir, J.-M.; Plaçais, B.

    2016-02-01

    The paradigm of graphene transistors is based on the gate modulation of the channel carrier density by means of a local channel gate. This standard architecture is subject to the scaling limit of the channel length and further restrictions due to access and contact resistances impeding the device performance. We propose a novel design, overcoming these issues by implementing additional local gates underneath the contact region which allow a full control of the Klein barrier taking place at the contact edge. In particular, our work demonstrates the GHz operation of transistors driven by independent contact gates. We benchmark the standard channel and novel contact gating and report for the later dynamical transconductance levels at the state of the art. Our finding may find applications in electronics and optoelectronics whenever there is need to control independently the Fermi level and the electrostatic potential of electronic sources or to get rid of cumbersome local channel gates.

  9. Surface Contact Model for Comets and Asteroids

    NASA Technical Reports Server (NTRS)

    Blackmore, Lars James C.; Trease, Brian P.; Acikmese, Behcet; Mandic, Milan; Carson, John M.

    2011-01-01

    A contact force model was developed for use in touch and go (TAG) surface sampling simulations on small celestial bodies such as comets and asteroids. In TAG scenarios, a spacecraft descending toward the surface of a small body comes into contact with the surface for a short duration of time, collects material samples with a sampler device, and then ascends to leave the surface. The surface contact required 6-DOF (degrees of freedom) dynamics models due to coupling of the attitude and translation dynamics during the contact. The model described here is for contact scenarios that utilize a rotating brush wheel sampler (BWS) to collect surface material. The model includes stiffness and damping of the surface material during BWS vertical motion, lateral friction from the BWS dragging across the surface, and lateral shear from the rotating BWS scooping the surface material. This model is useful for any mission to asteroids or comets that incorporates surface sampling operations.

  10. A method for modeling contact dynamics for automated capture mechanisms

    NASA Technical Reports Server (NTRS)

    Williams, Philip J.

    1991-01-01

    Logicon Control Dynamics develops contact dynamics models for space-based docking and berthing vehicles. The models compute contact forces for the physical contact between mating capture mechanism surfaces. Realistic simulation requires proportionality constants, for calculating contact forces, to approximate surface stiffness of contacting bodies. Proportionality for rigid metallic bodies becomes quite large. Small penetrations of surface boundaries can produce large contact forces.

  11. Measurement of metal/carbon nanotube contact resistance by adjusting contact length using laser ablation.

    PubMed

    Lan, Chun; Srisungsitthisunti, Pornsak; Amama, Placidus B; Fisher, Timothy S; Xu, Xianfan; Reifenberger, Ronald G

    2008-03-26

    A technique of measuring contact resistance between an individual nanotube and a deposited metallic film is described. Using laser ablation to sequentially shorten the contact length between a nanotube and the evaporated metallic film, the linear resistivity of the nanotube as well as the specific contact resistivity between the nanotube and metallic film can be determined. This technique can be generally used to measure the specific contact resistance that develops between a metallic film and a variety of different nanowires and nanotubes.

  12. 75 FR 6032 - National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-05

    ... renewal of a previously approved information collection requirement regarding the National Contact Center customer evaluation survey. A request for public comments was published in the Federal Register at 74 FR... ADMINISTRATION National Contact Center; Submission for OMB Review; National Contact Center Customer...

  13. 78 FR 30303 - National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-22

    ... in the Federal Register at 78 FR 14549, on March 6, 2013. No comments were received. DATES: Submit... ADMINISTRATION National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation Survey AGENCY: Contact Center Services, Federal Citizen Information Center, Office of Citizen...

  14. Silicone oil contamination and electrical contact resistance degradation of low-force gold contacts.

    SciTech Connect

    Dugger, Michael Thomas; Dickrell, Daniel John, III

    2006-02-01

    Hot-switched low-force gold electrical contact testing was performed using a nanomechanical test apparatus to ascertain the sensitivity of simulated microelectromechanical systems (MEMS) contact to silicone oil contamination. The observed cyclic contact resistance degradation was dependent on both closure rate and noncontact applied voltage. The decomposition of silicone oil from electrical arcing was hypothesized as the degradation mechanism.

  15. Toward patient-specific articular contact mechanics

    PubMed Central

    Ateshian, Gerard A.; Henak, Corinne R.; Weiss, Jeffrey A.

    2015-01-01

    The mechanics of contacting cartilage layers is fundamentally important to understanding the development, homeostasis and pathology of diarthrodial joints. Because of the highly nonlinear nature of both the materials and the contact problem itself, numerical methods such as the finite element method are typically incorporated to obtain solutions. Over the course of five decades, we have moved from an initial qualitative understanding of articular cartilage material behavior to the ability to perform complex, three-dimensional contact analysis, including multiphasic material representations. This history includes the development of analytical and computational contact analysis methods that now provide the ability to perform highly nonlinear analyses. Numerical implementations of contact analysis based on the finite element method are rapidly advancing and will soon enable patient-specific analysis of joint contact mechanics using models based on medical image data. In addition to contact stress on the articular surfaces, these techniques can predict variations in strain and strain through the cartilage layers, providing the basis to predict damage and failure. This opens up exciting areas for future research and application to patient-specific diagnosis and treatment planning applied to a variety of pathologies that affect joint function and cartilage homeostasis. PMID:25698236

  16. Resistivity of Rotated Graphite-Graphene Contacts.

    PubMed

    Chari, Tarun; Ribeiro-Palau, Rebeca; Dean, Cory R; Shepard, Kenneth

    2016-07-13

    Robust electrical contact of bulk conductors to two-dimensional (2D) material, such as graphene, is critical to the use of these 2D materials in practical electronic devices. Typical metallic contacts to graphene, whether edge or areal, yield a resistivity of no better than 100 Ω μm but are typically >10 kΩ μm. In this Letter, we employ single-crystal graphite for the bulk contact to graphene instead of conventional metals. The graphite contacts exhibit a transfer length up to four-times longer than in conventional metallic contacts. Furthermore, we are able to drive the contact resistivity to as little as 6.6 Ω μm(2) by tuning the relative orientation of the graphite and graphene crystals. We find that the contact resistivity exhibits a 60° periodicity corresponding to crystal symmetry with additional sharp decreases around 22° and 39°, which are among the commensurate angles of twisted bilayer graphene.

  17. Dynamics of the Molten Contact Line

    NASA Technical Reports Server (NTRS)

    Sonin, Ain A.; Schiaffino, Stefano

    1996-01-01

    In contrast to the ordinary contact line problem, virtually no information is available on the similar problem associated with a molten material spreading on a solid which is below the melt's fusion point. The latter is a more complex problem which heat transfer and solidification take place simultaneously with spreading, and requires answers not only for the hot melt's advance speed over the cold solid as a function of contact angle, but also for how one is to predict the point of the molten contact line's arrest by freezing. This issues are of importance in evolving methods of materials processing. The purpose of our work is to develop, based on both experiments and theory, an understanding of the dynamic processes that occur when a molten droplet touches a subcooled solid, spreads partly over it by capillary action, and freezes. We seek answers to the following basic questions. First, what is the relationship between the melt's contact line speed and the apparent (dynamic) contact angle? Secondly, at what point will the contact line modon be arrested by freezing? The talk will describe three components of our work: (1) deposition experiments with small molten droplets; (2) investigation of the dynamics of the molten contact line by means of a novel forced spreading method; and (3) an attempt to provide a theoretical framework for answering the basic questions posed above.

  18. Toward patient-specific articular contact mechanics.

    PubMed

    Ateshian, Gerard A; Henak, Corinne R; Weiss, Jeffrey A

    2015-03-18

    The mechanics of contacting cartilage layers is fundamentally important to understanding the development, homeostasis and pathology of diarthrodial joints. Because of the highly nonlinear nature of both the materials and the contact problem itself, numerical methods such as the finite element method are typically incorporated to obtain solutions. Over the course of five decades, we have moved from an initial qualitative understanding of articular cartilage material behavior to the ability to perform complex, three-dimensional contact analysis, including multiphasic material representations. This history includes the development of analytical and computational contact analysis methods that now provide the ability to perform highly nonlinear analyses. Numerical implementations of contact analysis based on the finite element method are rapidly advancing and will soon enable patient-specific analysis of joint contact mechanics using models based on medical image data. In addition to contact stress on the articular surfaces, these techniques can predict variations in strain and strain through the cartilage layers, providing the basis to predict damage and failure. This opens up exciting areas for future research and application to patient-specific diagnosis and treatment planning applied to a variety of pathologies that affect joint function and cartilage homeostasis.

  19. Epidemic contact tracing via communication traces.

    PubMed

    Farrahi, Katayoun; Emonet, Rémi; Cebrian, Manuel

    2014-01-01

    Traditional contact tracing relies on knowledge of the interpersonal network of physical interactions, where contagious outbreaks propagate. However, due to privacy constraints and noisy data assimilation, this network is generally difficult to reconstruct accurately. Communication traces obtained by mobile phones are known to be good proxies for the physical interaction network, and they may provide a valuable tool for contact tracing. Motivated by this assumption, we propose a model for contact tracing, where an infection is spreading in the physical interpersonal network, which can never be fully recovered; and contact tracing is occurring in a communication network which acts as a proxy for the first. We apply this dual model to a dataset covering 72 students over a 9 month period, for which both the physical interactions as well as the mobile communication traces are known. Our results suggest that a wide range of contact tracing strategies may significantly reduce the final size of the epidemic, by mainly affecting its peak of incidence. However, we find that for low overlap between the face-to-face and communication interaction network, contact tracing is only efficient at the beginning of the outbreak, due to rapidly increasing costs as the epidemic evolves. Overall, contact tracing via mobile phone communication traces may be a viable option to arrest contagious outbreaks. PMID:24787614

  20. Electrical contact resistance degradation of a hot-switched simulated metal MEMS contact.

    SciTech Connect

    Dugger, Michael Thomas; Dickrell, Daniel John, III

    2005-03-01

    Electrical contact resistance testing was performed by hot-switching a simulated gold-platinum metal microelectromechanical systems contact. The experimental objective was to determine the sensitivity of the contact resistance degradation to current level and environment. The contact resistance increased sharply after 100 hot-switched cycles in air. Hot-switching at a reduced current and in nitrogen atmosphere curtailed contact resistance degradation by several orders of magnitude. The mechanism responsible for the resistance degradation was found to be arc-induced decomposition of adsorbed surface contaminants.

  1. Identifying the causes of contact dermatitis.

    PubMed

    Jones, Ruth; Horn, Helen M

    2014-06-01

    Contact dermatitis results from skin contact with an exogenous substance. It can be caused by direct contact, airborne particles, vapours or light. Individuals of any age can be affected. The two most common variants are irritant contact dermatitis (ICD) and allergic contact dermatitis (ACD). ICD is more common and has a worse prognosis. Other less common forms of contact dermatitis include photocontact allergy and, in food handlers, protein contact dermatitis. ICD is a form of eczema and is induced by direct inflammatory pathways without prior sensitisation. Classical ACD is mediated by type 4 cell-mediated immunity. Sensitisation occurs within 5 to 16 days of skin contact with a potential allergen but at this first exposure there is no inflammation. Frequent exposure and high concentrations of potential allergens increase the risk of sensitisation. If eczema is recurrent/persistent, or occurs in an individual with no previous history of eczema, contact dermatitis should be considered. Dorsal aspects of the hands are most often affected by ICD, usually with involvement of the finger webs. Cumulative effects of water, soaps and detergents are the most common cause of ICD which affects the hands more often than any other site. Nickel, fragrances, rubber accelerators and biocides are the most common sensitisers in ACD. Patients with leg ulcers and stasis eczema are at especially high risk of developing allergies to ingredients of their topical treatments, dressings and bandages. If ACD is suspected the patient should be referred to secondary care for patch testing. Age should not be a deterrent to patch testing. Accurate diagnosis, avoidance of identified allergens and protection from irritants are the key to successful treatment.

  2. Exploring the Nature of Contact Freezing

    NASA Astrophysics Data System (ADS)

    Kiselev, A. A.; Hoffmann, N.; Duft, D.; Leisner, T.

    2012-12-01

    The freezing of supercooled water droplets upon contact with aerosol particles (contact nucleation of ice) is the least understood mechanism of ice formation in atmospheric clouds. Although experimental evidences suggest that some aerosols can be better IN in the contact than in the immersion mode (that is, triggering ice nucleation at higher temperature), no final explanation of this phenomena currently exists. On the other hand, the contact freezing is believed to be responsible for the enhanced rate of secondary ice formation occasionally observed in LIDAR measurements in the cold mixed phase clouds. Recently we have been able to show that the freezing of supercooled droplets electrodynamically levitated in the laminar flow containing mineral dust particles (kaolinite) is a process solely governed by a rate of collisions between the supercooled droplet and the aerosol particles. We have shown that the probability of droplet freezing on a single contact with aerosol particle may differ over an order of magnitude for kaolinite particles having different genesis and morphology. In this presentation we extend the study of contact nucleation of ice and compare the IN efficiency measured for DMA-selected kaolinite, illite and hematite particles. We show that the freezing probability increases towards unity as the temperature decreases and discuss the functional form of this temperature dependence. We explore the size dependence of the contact freezing probability and show that it scales with the surface area of the particles, thus resembling the immersion freezing behavior. However, for all minerals investigated so far, the contact freezing has been shown to dominate over immersion freezing on the short experimental time scales. Finally, based on the combined ESEM and electron microprobe analysis, we discuss the significance of particle morphology and variability of chemical composition on its IN efficiency in contact mode.

  3. Contact urticaria syndrome caused by haptens

    PubMed Central

    Panaszek, Bernard

    2014-01-01

    In the group of urticaria, contact urticaria syndrome is a particular variety. In these patients, appearance of typical skin lesions is preceded by contact of the skin and mucous membranes with various inhaled allergens, nutrients or contact details. Furthermore, symptoms connected with contact urticaria syndrome are characterized by gradual, stepwise waveform, which can be easily generalized – patients may develop systemic symptoms similar to those found in the angioedema, asthma or anaphylactic shock. It is an attribute of contact urticaria syndrome in the course of which potentially life-threatening symptoms may develop after contact of the skin with the allergen. The underlying mechanisms are poorly understood; both immunological and non-immunological mechanisms are taken into account, therefore contact urticaria syndrome can be classified into two categories – allergic and non-allergic. An intriguing phenomenon seems to be the immediate reaction after exposure to low molecular weight allergens – haptens, such as metals, which are usually the cause of delayed allergic reactions. Diagnosis is based on clinical presentation indicating a coincidence of the onset of allergy with contract with allergen, and helpful exposure tests. Treatment consists of supportive antihistamines and corticosteroids – locally and systemically. In the case of anaphylaxis, appropriate treatment intensification of the integration of pressor amines and hydration is necessary. It is also regarded that prevention is advisable, which consists of relevant information to avoid situations connected with contact with well-known factors. In this paper we describe a case of a 57-year-old female admitted to the Department of Internal Medicine, Geriatrics and Allergology, Medical University in Wroclaw to undergo diagnostic tests of chronic urticaria and angioedema. According to information obtained from the clinical presentation and after the diagnostic procedures, contact urticaria syndrome

  4. Electrical contacts to two-dimensional semiconductors

    NASA Astrophysics Data System (ADS)

    Allain, Adrien; Kang, Jiahao; Banerjee, Kaustav; Kis, Andras

    2015-12-01

    The performance of electronic and optoelectronic devices based on two-dimensional layered crystals, including graphene, semiconductors of the transition metal dichalcogenide family such as molybdenum disulphide (MoS2) and tungsten diselenide (WSe2), as well as other emerging two-dimensional semiconductors such as atomically thin black phosphorus, is significantly affected by the electrical contacts that connect these materials with external circuitry. Here, we present a comprehensive treatment of the physics of such interfaces at the contact region and discuss recent progress towards realizing optimal contacts for two-dimensional materials. We also discuss the requirements that must be fulfilled to realize efficient spin injection in transition metal dichalcogenides.

  5. Refractive index of rigid contact lens materials.

    PubMed

    Tranoudis, I; Efron, N

    1998-01-01

    A simple hand-held refractometer was used to measure the refractive index of 27 rigid gas permeable contact lens materials. As a general rule, lenses with refractive indices lower than 1.458 are made from fluorosilicone acrylates; lenses with refractive indices in the range of 1.458 to 1.469 are made from either fluorosilicone acrylates or silicone acrylates; and lenses with refractive indices greater than 1.469 are made from silicone acrylates. It is demonstrated how refractometry can be used by contact lens practitioners for the identification and verification of rigid contact lenses.

  6. Hybrid emitter all back contact solar cell

    DOEpatents

    Loscutoff, Paul; Rim, Seung

    2016-04-12

    An all back contact solar cell has a hybrid emitter design. The solar cell has a thin dielectric layer formed on a backside surface of a single crystalline silicon substrate. One emitter of the solar cell is made of doped polycrystalline silicon that is formed on the thin dielectric layer. The other emitter of the solar cell is formed in the single crystalline silicon substrate and is made of doped single crystalline silicon. The solar cell includes contact holes that allow metal contacts to connect to corresponding emitters.

  7. Maskless electrodeposited contact for conducting polymer nanowires

    NASA Astrophysics Data System (ADS)

    Hangarter, Carlos M.; Bangar, Mangesh; Hernandez, Sandra C.; Chen, Wilfred; Deshusses, Marc A.; Mulchandani, Ashok; Myung, Nosang V.

    2008-02-01

    This letter reports a simple and scalable method to create mechanical joints and electrical contacts of conducting polymer nanowires to electrodes by selective maskless metal electrodeposition on electrodes. This is an attractive route for contacting nanowires as it bypasses harsh processing conditions of conventional methods. The electrodeposition conditions and initial resistance of the nanowires were found to have a significant impact on the selective maskless deposition. Different dopants were also investigated to understand the polymer reduction during cathodic deposition of metal. A single dodecyl sulfate doped polypyrrole nanowire with maskless electrodeposited nickel contacts was shown to have improved sensitivity toward ammonia gas.

  8. Systemic Contact Dermatitis from Propolis Ingestion

    PubMed Central

    Cho, Eujin; Lee, Jeong Deuk

    2011-01-01

    Propolis, also known as bee glue, is a substance collected by worker bees and it is used as a material for constructing and maintaining their beehives. It has been used topically and orally by humans for its anti-inflammatory properties. However, the growing use of propolis has been paralleled by reports of allergic contact dermatitis as a reaction to the substance. Contact dermatitis with generalized cutaneous manifestations elicited by propolis ingestion has not been previously reported. Here we report on the first case of systemic contact dermatitis from propolis ingestion in a 36-year-old woman. PMID:21738371

  9. Electrical contacts to two-dimensional semiconductors.

    PubMed

    Allain, Adrien; Kang, Jiahao; Banerjee, Kaustav; Kis, Andras

    2015-12-01

    The performance of electronic and optoelectronic devices based on two-dimensional layered crystals, including graphene, semiconductors of the transition metal dichalcogenide family such as molybdenum disulphide (MoS2) and tungsten diselenide (WSe2), as well as other emerging two-dimensional semiconductors such as atomically thin black phosphorus, is significantly affected by the electrical contacts that connect these materials with external circuitry. Here, we present a comprehensive treatment of the physics of such interfaces at the contact region and discuss recent progress towards realizing optimal contacts for two-dimensional materials. We also discuss the requirements that must be fulfilled to realize efficient spin injection in transition metal dichalcogenides.

  10. Algorithms for Contact in a Mulitphysics Environment

    2001-12-19

    Many codes require either a contact capability or a need to determine geometric proximity of non-connected topological entities (which is a subset of what contact requires). ACME is a library to provide services to determine contact forces and/or geometric proximity interactions. This includes generic capabilities such as determining points in Cartesian volumes, finding faces in Cartesian volumes, etc. ACME can be run in single or multi-processor mode (the basic algorithms have been tested up tomore » 4500 processors).« less

  11. Photometric solutions of some contact ASAS binaries

    NASA Astrophysics Data System (ADS)

    Gezer, İ.; Bozkurt, Z.

    2016-04-01

    We present the first light curve solution of 6 contact binary systems which are chosen from the ASAS catalog. The photometric elements and the estimated absolute parameters of all systems are obtained with the light curve analyses. We calculated the values of degree of contact for the systems. The location of the targets on the Hertzsprung-Russell diagram and the mass-radius plane is compared to the other well-known contact binaries and the evolutionary status of the systems are also discussed.

  12. Hertzian contact in two and three dimensions

    NASA Technical Reports Server (NTRS)

    Tripp, J. H.

    1985-01-01

    The basic solution to the problem of mechanical contact between elastically deforming solids was proposed by Hertz over a century ago and has been used by tribologists and others ever since in a steadily increasing number of applications. While the theoretical development is not conceptually difficult and treatments exist to suit all tastes, it is nonetheless interesting to trace the relationships among the solutions in different dimensions. Such an approach is used herein to shed light on the curious and sometimes perplexing behavior of line contacts. A number of the more frequently used contact expressions together as a convenient reference and for comparative purposes.

  13. Evaluation of the electrical contact area in contact-mode scanning probe microscopy

    SciTech Connect

    Celano, Umberto E-mail: u.celano@gmail.com; Chintala, Ravi Chandra; Vandervorst, Wilfried; Hantschel, Thomas; Giammaria, Guido; Conard, Thierry; Bender, Hugo

    2015-06-07

    The tunneling current through an atomic force microscopy (AFM) tip is used to evaluate the effective electrical contact area, which exists between tip and sample in contact-AFM electrical measurements. A simple procedure for the evaluation of the effective electrical contact area is described using conductive atomic force microscopy (C-AFM) in combination with a thin dielectric. We characterize the electrical contact area for coated metal and doped-diamond tips operated at low force (<200 nN) in contact mode. In both cases, we observe that only a small fraction (<10 nm{sup 2}) of the physical contact (∼100 nm{sup 2}) is effectively contributing to the transport phenomena. Assuming this reduced area is confined to the central area of the physical contact, these results explain the sub-10 nm electrical resolution observed in C-AFM measurements.

  14. Contact Freezing of Water by Salts.

    PubMed

    Niehaus, Joseph; Cantrell, Will

    2015-09-01

    Water is unlikely to crystallize homogeneously at temperatures greater than -34 °C. Freezing at higher temperatures is heterogeneous-catalyzed by the presence of a second substance. If that substance is at an air-water interface, then the mode is called contact freezing, and it typically will trigger nucleation at a higher temperature than if the substance were wholly immersed within the liquid. We find that the impact of salt particles initiates freezing in experiments using water droplets at supercoolings of 9 to 16 °C. These results show that contact freezing nuclei need not be effective as immersion mode nuclei. We discuss our results in the context of proposed mechanisms of contact freezing. Finally, we use the time scales for diffusion of heat and of ions and the propagation of a sound wave through the droplet to estimate that contact freezing occurs within 10 ns of impact. PMID:26291340

  15. NES: How to Contact the NES Team

    NASA Video Gallery

    Learn how to get your questions answered by contacting the NASA Explorer Schools team through email or toll-free telephone. You may use the FAQs to find information about the project. There is also...

  16. Critical behaviours of contact near phase transitions

    PubMed Central

    Chen, Y.-Y.; Jiang, Y.-Z.; Guan, X.-W.; Zhou, Qi

    2014-01-01

    A central quantity of importance for ultracold atoms is contact, which measures two-body correlations at short distances in dilute systems. It appears in universal relations among thermodynamic quantities, such as large momentum tails, energy and dynamic structure factors, through the renowned Tan relations. However, a conceptual question remains open as to whether or not contact can signify phase transitions that are insensitive to short-range physics. Here we show that, near a continuous classical or quantum phase transition, contact exhibits a variety of critical behaviours, including scaling laws and critical exponents that are uniquely determined by the universality class of the phase transition, and a constant contact per particle. We also use a prototypical exactly solvable model to demonstrate these critical behaviours in one-dimensional strongly interacting fermions. Our work establishes an intrinsic connection between the universality of dilute many-body systems and universal critical phenomena near a phase transition. PMID:25346226

  17. Critical behaviours of contact near phase transitions.

    PubMed

    Chen, Y-Y; Jiang, Y-Z; Guan, X-W; Zhou, Qi

    2014-01-01

    A central quantity of importance for ultracold atoms is contact, which measures two-body correlations at short distances in dilute systems. It appears in universal relations among thermodynamic quantities, such as large momentum tails, energy and dynamic structure factors, through the renowned Tan relations. However, a conceptual question remains open as to whether or not contact can signify phase transitions that are insensitive to short-range physics. Here we show that, near a continuous classical or quantum phase transition, contact exhibits a variety of critical behaviours, including scaling laws and critical exponents that are uniquely determined by the universality class of the phase transition, and a constant contact per particle. We also use a prototypical exactly solvable model to demonstrate these critical behaviours in one-dimensional strongly interacting fermions. Our work establishes an intrinsic connection between the universality of dilute many-body systems and universal critical phenomena near a phase transition. PMID:25346226

  18. Contact and photocontact allergy to musk ambrette.

    PubMed

    Wojnarowska, F; Calnan, C D

    1986-06-01

    Musk ambrette, a contact and photocontact allergen, is a synthetic fragrance present in aftershave lotions and many toiletries. Thirty-four patients with contact and photocontact allergy to musk ambrette were studied. All had a facial eczema. Four distinctive clinical pictures were seen. These were plaques of eczema, jawline (mandibular) dermatitis, acute contact dermatitis and chronic actinic dermatitis. Twenty-six patients were light sensitive by history and 10 were diagnosed by clinical criteria as having chronic actinic dermatitis. Patch and photopatch testing to musk ambrette showed that seven patients had pure photocontact dermatitis to musk ambrette. Eight patients had contact dermatitis to musk ambrette but this was exacerbated by irradiation. Cross reaction with moskene occurred. Scrupulous avoidance of musk ambrette has resulted in clinical resolution in most patients.

  19. The contact area dependent interfacial thermal conductance

    SciTech Connect

    Liu, Chenhan; Wei, Zhiyong; Bi, Kedong; Yang, Juekuan; Chen, Yunfei; Wang, Jian

    2015-12-15

    The effects of the contact area on the interfacial thermal conductance σ are investigated using the atomic Green’s function method. Different from the prediction of the heat diffusion transport model, we obtain an interesting result that the interfacial thermal conductance per unit area Λ is positively dependent on the contact area as the area varies from a few atoms to several square nanometers. Through calculating the phonon transmission function, it is uncovered that the phonon transmission per unit area increases with the increased contact area. This is attributed to that each atom has more neighboring atoms in the counterpart of the interface with the increased contact area, which provides more channels for phonon transport.

  20. 5 CFR 2600.102 - Contact information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... numbers. OGE's main telephone number is 202-482-9300. Persons who are deaf or speech impaired may contact OGE at the following TDD (Telecommunications Device for the Deaf and Speech Impaired) number:...

  1. 5 CFR 2600.102 - Contact information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... numbers. OGE's main telephone number is 202-482-9300. Persons who are deaf or speech impaired may contact OGE at the following TDD (Telecommunications Device for the Deaf and Speech Impaired) number:...

  2. Moving contact line on chemically patterned surfaces

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Ping; Qian, Tiezheng; Sheng, Ping

    We simulate the moving contact line in two-dimensional chemically patterned channels using a diffuse-interface model with the generalized Navier boundary condition. The motion of the fluidslip behaviour of the contact line. The extra dissipation induced by this oscillatory contact-line motion is significant and increases rapidly with the wettability contrast of the pattern. A critical value of the wettability contrast is identified above which the effect of diffusion becomes important, leading to the interesting behaviour of fluid-fluid interface breaking, with the transport of the non-wetting fluid being assisted and mediated by rapid diffusion through the wetting fluid. Near the critical value, the time-averaged extra dissipation scales as U, the displacement velocity. By decreasing the period of the pattern, we show the solid surface to be characterized by an effective contact angle whose value depends on the material characteristics and composition of the patterned surfaces.

  3. 5 CFR 2600.102 - Contact information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... numbers. OGE's main telephone number is 202-482-9300. Persons who are deaf or speech impaired may contact OGE at the following TDD (Telecommunications Device for the Deaf and Speech Impaired) number:...

  4. Nanoparticle derived contacts for photovoltaic cells

    SciTech Connect

    Ginley, D.S.

    1999-10-20

    Contacts are becoming increasingly important as PV devices move to higher efficiency and lower cost. The authors present an approach to developing contacts using nanoparticle-based precursors. Both elemental, alloy and compound nanoparticles can be employed for contacts. Ink based approaches can be utilized at low temperatures and utilize direct write techniques such as ink jet and screen printing. The ability to control the composition of the nanoparticle allows improved control of the contact metallurgy and the potential for thermodynamically stable interfaces. A key requirement is the ability to control the interface between particles and between particles and the substrate. The authors illustrate some of these principals with recent results on Al, Cu and (Hg,Cu)Te. They show that for the elemental materials control of the surface can prevent oxide formation and act as glue to control the reactivity of the nanoparticles.

  5. 5 CFR 2600.102 - Contact information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... numbers. OGE's main telephone number is 202-482-9300. Persons who are deaf or speech impaired may contact OGE at the following TDD (Telecommunications Device for the Deaf and Speech Impaired) number:...

  6. Front contact solar cell with formed emitter

    DOEpatents

    Cousins, Peter John

    2012-07-17

    A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

  7. Front contact solar cell with formed emitter

    DOEpatents

    Cousins, Peter John

    2014-11-04

    A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

  8. Contact-resistance test probes: A concept

    NASA Technical Reports Server (NTRS)

    Brooks, C. H.; Maxwell, J. H.; Mc Dermott, R. J.

    1971-01-01

    Devices are used in inspection of contact resistance in plated connectors after assembly into cables. System permits rapid inspection of connectors when mating connectors or special apparatus are not available, and enables source of excessive resistance to be precisely determined.

  9. Modeling Epidemics Spreading on Social Contact Networks

    PubMed Central

    ZHANG, ZHAOYANG; WANG, HONGGANG; WANG, CHONGGANG; FANG, HUA

    2016-01-01

    Social contact networks and the way people interact with each other are the key factors that impact on epidemics spreading. However, it is challenging to model the behavior of epidemics based on social contact networks due to their high dynamics. Traditional models such as susceptible-infected-recovered (SIR) model ignore the crowding or protection effect and thus has some unrealistic assumption. In this paper, we consider the crowding or protection effect and develop a novel model called improved SIR model. Then, we use both deterministic and stochastic models to characterize the dynamics of epidemics on social contact networks. The results from both simulations and real data set conclude that the epidemics are more likely to outbreak on social contact networks with higher average degree. We also present some potential immunization strategies, such as random set immunization, dominating set immunization, and high degree set immunization to further prove the conclusion.

  10. Theory of reciprocating contact for viscoelastic solids

    NASA Astrophysics Data System (ADS)

    Putignano, Carmine; Carbone, Giuseppe; Dini, Daniele

    2016-04-01

    A theory of reciprocating contacts for linear viscoelastic materials is presented. Results are discussed for the case of a rigid sphere sinusoidally driven in sliding contact with a viscoelastic half-space. Depending on the size of the contact, the frequency and amplitude of the reciprocating motion, and on the relaxation time of the viscoelastic body, we establish that the contact behavior may range from the steady-state viscoelastic solution, in which traction forces always oppose the direction of the sliding rigid punch, to a more elaborate trend, which is due to the strong interaction between different regions of the path covered during the reciprocating motion. Practical implications span a number of applications, ranging from seismic engineering to biotechnology.

  11. Contact-Allergic Reactions to Cosmetics

    PubMed Central

    Goossens, An

    2011-01-01

    Contact-allergic reactions to cosmetics may be delayed-type reactions such as allergic and photo-allergic contact dermatitis, and more exceptionally also immediate-type reactions, that is, contact urticaria. Fragrances and preservative agents are the most important contact allergens, but reactions also occur to category-specific products such as hair dyes and other hair-care products, nail cosmetics, sunscreens, as well as to antioxidants, vehicles, emulsifiers, and, in fact, any possible cosmetic ingredient. Patch and prick testing to detect the respective culprits remains the golden standard for diagnosis, although additional tests might be useful as well. Once the specific allergens are identified, the patients should be informed of which products can be safely used in the future. PMID:21461388

  12. Identity Theft: A Study in Contact Centres

    NASA Astrophysics Data System (ADS)

    Moir, Iain; Weir, George R. S.

    This paper explores the recent phenomenon of identity theft. In particular, it examines the contact centre environment as a mechanism for this to occur. Through a survey that was conducted amongst forty-five contact centre workers in the Glasgow area we determined that contact centres can and do provide a mechanism for identity theft. Specifically, we found a particularly high incidence of agents who had previously dealt with phone calls that they considered suspicious. Furthermore, there are agents within such environments who have previously been offered money in exchange for customers' details, or who know of fellow workers who received such offers. Lastly, we identify specific practices within contact centres that may contribute to the likelihood of identity theft.

  13. Formula Gives Better Contact-Resistance Values

    NASA Technical Reports Server (NTRS)

    Lieneweg, Udo; Hannaman, David J.

    1988-01-01

    Lateral currents in contact strips taken into account. Four-terminal test structures added to intergrated circuits to enable measurement of interfacial resistivities of contacts between thin conducting layers. Thin-film model simplified quasi-two-dimensional potential model that accounts adequately for complicated three-dimensional, nonuniform current densitites. Effects of nonuniformity caused by lateral current flow in strips summarized in equivalent resistance Rs and voltage Vs.

  14. Allergic contact dermatitis to adhesive bandages.

    PubMed

    Norris, P; Storrs, F J

    1990-01-01

    More than two billion Band-Aid Brand Sheer Strips are used in the United States yearly, yet allergic contact dermatitis resulting from their use is nearly nonexistent. We report four patients with allergic reactions to these strips. One patient reacted to tricresyl phosphate, the plasticizer in the vinyl backing; another patient was allergic to 2,5-di(tertiary-amyl)hydroquinone, the antioxidant in the adhesive. In the other two patients, the allergic contact dermatitis remains unexplained.

  15. On contact problems of elasticity theory

    NASA Technical Reports Server (NTRS)

    Kalandiya, A. I.

    1986-01-01

    Certain contact problems are reviewed in the two-dimensional theory of elasticity when round bodies touch without friction along most of the boundary and, therefore, Herz' hypothesis on the smallness of the contact area cannot be used. Fundamental equations were derived coinciding externally with the equation in the theory of a finite-span wing with unkown parameter. These equations are solved using Multhopp's well-known technique, and numerical calculations are performed in specific examples.

  16. Spatial analyses of wildlife contact networks

    PubMed Central

    Davis, Stephen; Abbasi, Babak; Shah, Shrupa; Telfer, Sandra; Begon, Mike

    2015-01-01

    Datasets from which wildlife contact networks of epidemiological importance can be inferred are becoming increasingly common. A largely unexplored facet of these data is finding evidence of spatial constraints on who has contact with whom, despite theoretical epidemiologists having long realized spatial constraints can play a critical role in infectious disease dynamics. A graph dissimilarity measure is proposed to quantify how close an observed contact network is to being purely spatial whereby its edges are completely determined by the spatial arrangement of its nodes. Statistical techniques are also used to fit a series of mechanistic models for contact rates between individuals to the binary edge data representing presence or absence of observed contact. These are the basis for a second measure that quantifies the extent to which contacts are being mediated by distance. We apply these methods to a set of 128 contact networks of field voles (Microtus agrestis) inferred from mark–recapture data collected over 7 years and from four sites. Large fluctuations in vole abundance allow us to demonstrate that the networks become increasingly similar to spatial proximity graphs as vole density increases. The average number of contacts, , was (i) positively correlated with vole density across the range of observed densities and (ii) for two of the four sites a saturating function of density. The implications for pathogen persistence in wildlife may be that persistence is relatively unaffected by fluctuations in host density because at low density is low but hosts move more freely, and at high density is high but transmission is hampered by local build-up of infected or recovered animals. PMID:25411407

  17. Reconstructing contact network parameters from viral phylogenies

    PubMed Central

    McCloskey, Rosemary M.; Liang, Richard H.; Poon, Art F.Y.

    2016-01-01

    Models of the spread of disease in a population often make the simplifying assumption that the population is homogeneously mixed, or is divided into homogeneously mixed compartments. However, human populations have complex structures formed by social contacts, which can have a significant influence on the rate of epidemic spread. Contact network models capture this structure by explicitly representing each contact which could possibly lead to a transmission. We developed a method based on approximate Bayesian computation (ABC), a likelihood-free inference strategy, for estimating structural parameters of the contact network underlying an observed viral phylogeny. The method combines adaptive sequential Monte Carlo for ABC, Gillespie simulation for propagating epidemics though networks, and a kernel-based tree similarity score. We used the method to fit the Barabási-Albert network model to simulated transmission trees, and also applied it to viral phylogenies estimated from ten published HIV sequence datasets. This model incorporates a feature called preferential attachment (PA), whereby individuals with more existing contacts accumulate new contacts at a higher rate. On simulated data, we found that the strength of PA and the number of infected nodes in the network can often be accurately estimated. On the other hand, the mean degree of the network, as well as the total number of nodes, was not estimable with ABC. We observed sub-linear PA power in all datasets, as well as higher PA power in networks of injection drug users. These results underscore the importance of considering contact structures when performing phylodynamic inference. Our method offers the potential to quantitatively investigate the contact network structure underlying viral epidemics.

  18. MRCK_3D contact detonation algorithm

    SciTech Connect

    Rougier, Esteban; Munjiza, Antonio

    2010-01-01

    Large-scale Combined Finite-Discrete Element Methods (FEM-DEM) and Discrete Element Methods (DEM) simulations involving contact of a large number of separate bod ies need an efficient, robust and flexible contact detection algorithm. In this work the MRCK-3D search algorithm is outlined and its main CPU perfonnances are evaluated. One of the most important aspects of this newly developed search algorithm is that it is applicable to systems consisting of many bodies of different shapes and sizes.

  19. Amiodarone keratopathy and rigid contact lens wear.

    PubMed

    Astin, C L

    2001-01-01

    Two cases are presented of patients wearing rigid gas permeable contact lenses who exhibited the typical fan-shaped patterns of corneal pigment deposition related to long-term medication containing amiodarone. The vortex corneal epitheliopathy and contact lens tolerance were monitored over several years. In both cases, the lens material was replaced with one incorporating an ultra-violet light inhibitor in view of the possibility of medically induced photosensitivity.

  20. Reduction technique for tire contact problems

    NASA Technical Reports Server (NTRS)

    Noor, Ahmed K.; Peters, Jeanne M.

    1995-01-01

    A reduction technique and a computational procedure are presented for predicting the tire contact response and evaluating the sensitivity coefficients of the different response quantities. The sensitivity coefficients measure the sensitivity of the contact response to variations in the geometric and material parameters of the tire. The tire is modeled using a two-dimensional laminated anisotropic shell theory with the effects of variation in geometric and material parameters, transverse shear deformation, and geometric nonlinearities included. The contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of the stress resultants, the generalized displacements, and the Lagrange multipliers associated with the contact conditions. The elemental arrays are obtained by using a modified two-field, mixed variational principle. For the application of the reduction technique, the tire finite element model is partitioned into two regions. The first region consists of the nodes that are likely to come in contact with the pavement, and the second region includes all the remaining nodes. The reduction technique is used to significantly reduce the degrees of freedom in the second region. The effectiveness of the computational procedure is demonstrated by a numerical example of the frictionless contact response of the space shuttle nose-gear tire, inflated and pressed against a rigid flat surface.

  1. Molecular mechanisms that control endothelial cell contacts.

    PubMed

    Vestweber, D

    2000-02-01

    Endothelial cell contacts control the permeability of the blood vessel wall. This allows the endothelium to form a barrier for solutes, macromolecules, and leukocytes between the vessel lumen and the interstitial space. Loss of this barrier function in pathophysiological situations can lead to extracellular oedema. The ability of leukocytes to enter tissue at sites of inflammation is dependent on molecular mechanisms that allow leukocytes to adhere to the endothelium and to migrate through the endothelial cell layer and the underlying basal lamina. It is a commonly accepted working hypothesis that inter-endothelial cell contacts are actively opened and closed during this process. Angiogenesis is another important process that requires well-controlled regulation of inter-endothelial cell contacts. The formation of new blood vessels by sprouting from pre-existing vessels depends on the loosening of established endothelial cell contacts and the migration of endothelial cells that form the outgrowing sprouts. This review focuses on the molecular composition of endothelial cell surface proteins and proteins of the cytoskeletal undercoat of the plasma membrane at sites of inter-endothelial cell contacts and discusses the current knowledge about the potential role of such molecules in the regulation of endothelial cell contacts. PMID:10685062

  2. Coupling of Carbon Nanotubes to Metallic Contacts

    NASA Technical Reports Server (NTRS)

    Anantram, M. P.; Datta, S.; Xue, Yong-Xiang; Govindan, T. R. (Technical Monitor)

    1999-01-01

    The modeling of carbon nanotube-metal contacts is important from both basic and applied view points. For many applications, it is important to design contacts such that the transmission is dictated by intrinsic properties of the nanotube rather than by details of the contact. In this paper, we calculate the electron transmission probability from a nanotube to a free electron metal, which is side-contacted. If the metal-nanotube interface is sufficiently ordered, we find that k-vector conservation plays an important role in determining the coupling, with the physics depending on the area of contact, tube diameter, and chirality. The main results of this paper are: (1) conductance scales with contact length, a phenomena that has been observed in experiments and (2) in the case of uniform coupling between metal and nanotube, the threshold value of the metal Fermi wave vector (below which coupling is insignificant) depends on chirality. Disorder and small phase coherence length relax the need for k-vector conservation, thereby making the coupling stronger.

  3. Shear strength of metal-sapphire contacts

    NASA Technical Reports Server (NTRS)

    Pepper, S. V.

    1976-01-01

    The shear strength of polycrystalline Ag, Cu, Ni, and Fe contacts on clean (0001) sapphire has been studied in ultrahigh vacuum. Both clean metal surfaces and surfaces exposed to O2, Cl2, and C2H4 were used. The results indicate that there are two sources of strength of Al2O3-metal contacts: an intrinsic one that depends on the particular clean metal in contact with Al2O3 and an additional one due to intermediate films. The shear strength of the clean metal contacts correlated directly with the free energy of oxide formation for the lowest metal oxide, in accord with the hypothesis that a chemical bond is formed between metal cations and oxygen anions in the sapphire surface. Contacts formed by metals exposed to chlorine exhibited uniformly low shear strength indicative of van der Waals bonding between chlorinated metal surfaces and sapphire. Contacts formed by metals exposed to oxygen exhibited enhanced shear strength, in accord with the hypothesis that an intermediate oxide layer increases interfacial strength.

  4. Self-contact elimination by membrane fusion.

    PubMed

    Sumida, Grant M; Yamada, Soichiro

    2013-11-19

    Mutual, homophilic cell-cell adhesion between epithelial cells is required for proper maintenance of epithelial barrier function. Whereas opposing membranes from neighboring cells rapidly assemble junctional complexes, self-contacting membranes curiously do not, suggesting that cells have the ability to prevent the maturation of self-junctions. Using a self-contact-inducing microfabricated substrate, we show that self-contacts of normal epithelial cells are rapidly eliminated by membrane fusion between two opposing plasma membranes of a single cell. This membrane fusion is most frequently observed in E-cadherin-expressing epithelial cells, but not in fibroblasts. The efficiency of self-contact elimination depends on extracellular calcium concentration and the level of E-cadherin, suggesting that E-cadherin, although not required, enhances membrane fusion efficiency by bringing opposing membranes into close apposition to one another. Additionally, Rho-associated protein kinase inhibition decreases self-contact-induced membrane fusion of epithelial cells, suggesting that this fusion may be mechanically regulated through the actin-myosin network. This self-contact-induced membrane fusion is a key elimination mechanism for unwanted self-junctions and may be a feature of cell self-recognition. PMID:24191042

  5. Microbial contamination of contact lens storage cases and domestic tap water of contact lens wearers.

    PubMed

    Üstüntürk, Miray; Zeybek, Zuhal

    2012-11-01

    Contact lenses have been widely used as an alternative to spectacles both in developed and developing countries. However, under certain circumstances, adverse responses can occur during contact lens wear and several microorganisms--including bacteria, fungi, and free living amoebae--can cause several eye infections in wearers. Extended wear of contact lenses is the major risk factor of eye infections such as microbial keratitis, besides contaminated contact lens storage case, contaminated lens care solutions, and inaccurate contact lens handling. In this study, we collected contact lens storage case and domestic tap water samples from 50 asymptomatic contact lens wearers. We determined that total aerobic mesophilic bacteria were isolated in 45 (90 %), Gram negative rod bacteria were isolated in 20 (40 %), Pseudomonas spp. were isolated in 2 (4 %) and fungi were isolated in 18 (36 %) out of 50 contact lens storage cases. Free living amoebae were not detected in investigated contact lens storage cases. At the same time, out of 50, total aerobic mesophilic bacteria were isolated in 34 (68 %), fungi were isolated in 15 (30 %) and free living amoebae were isolated in 15 (30 %) domestic tap water samples. No Gram-negative rod bacteria and Pseudomonas spp. were detected in investigated water samples. Two contact lens case samples and two tap water samples were excluded from the analysis for Pseudomonas spp. for technical reasons. According to our findings, inadequate contact lens maintenance during lens wear may result in the contamination of contact lens storage cases. This situation can lead to severe eye infections in contact lens wearers over time.

  6. Dynamics of the Molten Contact Line

    NASA Technical Reports Server (NTRS)

    Sonin, Ain A.; Duthaler, Gregg; Liu, Michael; Torresola, Javier; Qiu, Taiqing

    1999-01-01

    The purpose of this program is to develop a basic understanding of how a molten material front spreads over a solid that is below its melting point, arrests, and freezes. Our hope is that the work will contribute toward a scientific knowledge base for certain new applications involving molten droplet deposition, including the "printing" of arbitrary three-dimensional objects by precise deposition of individual molten microdrops that solidify after impact. Little information is available at this time on the capillarity-driven motion and arrest of molten contact line regions. Schiaffino and Sonin investigated the arrest of the contact line of a molten microcrystalline wax spreading over a subcooled solid "target" of the same material. They found that contact line arrest takes place at an apparent liquid contact angle that depends primarily on the Stefan number S=c(T(sub f) -T(sub t)/L based on the temperature difference between the fusion point and the target temperature, and proposed that contact line arrest occurs when the liquid's dynamic contact angle approaches the angle of attack of the solidification front just behind the contact line. They also showed, however, that the conventional continuum equations and boundary conditions have no meaningful solution for this angle. The solidification front angle is determined by the heat flux just behind the contact line, and the heat flux is singular at that point. By comparing experiments with numerical computations, Schiaffino and Sonin estimated that the conventional solidification model must break down within a distance of order 0.1 - 1 microns of the contact line. The physical mechanism for this breakdown is as yet undetermined, and no first-principles theory exists for the contact angle at arrest. Schiaffino and Sonin also presented a framework for understanding how to moderate Weber number molten droplet deposition in terms of similarity laws and experimentation. The study is based on experiments with three molten

  7. Contact resistance improvement by the modulation of peripheral length to area ratio of graphene contact pattern

    SciTech Connect

    Cho, Chunhum; Lee, Sangchul; Lee, Sang Kyung; Noh, Jin Woo; Park, Woojin; Lee, Young Gon; Hwang, Hyeon Jun; Ham, Moon-Ho; Kang, Chang Goo; Lee, Byoung Hun

    2015-05-25

    High contact resistance between graphene and metal is a major huddle for high performance electronic device applications of graphene. In this work, a method to improve the contact resistance of graphene is investigated by varying the ratio of peripheral length and area of graphene pattern under a metal contact. The contact resistance decreased to 0.8 kΩ·μm from 2.1 kΩ·μm as the peripheral length increased from 312 to 792 μm. This improvement is attributed to the low resistivity of edge-contacted graphene, which is 8.1 × 10{sup 5} times lower than that of top-contacted graphene.

  8. Influence of pre-etching on specific contact parameters for metal-GaN contacts

    NASA Astrophysics Data System (ADS)

    Mistele, D.; Aderhold, J.; Klausing, H.; Rotter, T.; Semchinova, O.; Stemmer, J.; Uffmann, D.; Graul, J.; Eberhard, F.; Mayer, M.; Schauler, M.; Kamp, M.; Ahrens, C.

    1999-07-01

    We report on the influence of different pre-etch methods on specific contact parameters of GaN contacts. For these investigations we used ex situ chemically assisted ion beam etching and in situ sputter etching before metal deposition. The electrical contact parameters were determined using the extended circular transmission line model (CTLM). For nitrogen as an etching gas we obtained rectifying character (Schottky) of metal-n-GaN contacts compared with mostly linear (Ohmic) behaviour for conventional etching gases such as Ar or ArCl2. We assume that a decrease of N vacancies caused by the N2 treatment is responsible for the Schottky behaviour of these contacts. Pre-etch sputtering with Ar+ ions reduces on the one hand the specific contact resistance icons/Journals/Common/rho" ALT="rho" ALIGN="TOP"/>C but on the other hand the CTLM model reveals that simultaneously the sheet resistance Rsk in the near-surface region increases.

  9. Contact Interface Verification for DYNA3D Scenario 1: Basic Contact

    SciTech Connect

    McMichael, L D

    2006-05-10

    A suite of test problems has been developed to examine contact behavior within the nonlinear, three-dimensional, explicit finite element analysis (FEA) code DYNA3D (Lin, 2005). The test problems address the basic functionality of the contact algorithms, including the behavior of various kinematic, penalty, and Lagrangian enforcement formulations. The results from the DYNA3D analyses are compared to closed form solutions to verify the contact behavior. This work was performed as part of the Verification and Validation efforts of LLNL W Program within the NNSA's Advanced Simulation and Computing (ASC) Program. DYNA3D models the transient dynamic response of solids and structures including the interactions between disjoint bodies (parts). A wide variety of contact surfaces are available to represent the diverse interactions possible during an analysis, including relative motion (sliding), separation and gap closure (voids), and fixed relative position (tied). The problem geometry may be defined using a combination of element formulations, including one-dimensional beam and truss elements, two-dimensional shell elements, and three-dimensional solid elements. Consequently, it is necessary to consider various element interactions for each contact algorithm being verified. Most of the contact algorithms currently available in DYNA3D are examined; the exceptions are the Type 4--Single Surface Contact and Type 11--SAND algorithms. It is likely that these algorithms will be removed since their functionality is embodied in other, more robust, contact algorithms. The automatic contact algorithm is evaluated using the Type 12 interface. Two other variations of automatic contact, Type 13 and Type 14, offer additional means to adapt the interface domain, but share the same search and restoration algorithms as Type 12. The contact algorithms are summarized in Table 1. This report and associated test problems examine the scenario where one contact surface exists between two

  10. Contact detection and contact motion for error recovery in the presence of uncertainties

    NASA Technical Reports Server (NTRS)

    Xiao, Jing

    1992-01-01

    Due to various kinds of uncertainties, a robot motion may fail and result in some unintended contact between the object held by the robot and the environment, which greatly hampers robotics applications on tasks with high-precision requirements, such as assembly tasks. Aiming at automatically recovering a robotic task from such a failure, this paper discusses, in the presence of uncertainties, contact detection based on contact motion for recovery. It presents a framework for on-line recognizing contacts using multiple sensor modalities in the presence of sensing uncertainties and means for ensuring successful compliant motions in the presence of sensing and control uncertainties.

  11. Scratch resistance of rigid contact lens materials.

    PubMed

    Tranoudis, I; Efron, N

    1996-07-01

    Practitioners have long recognised the importance of determining the extent of scratching on the surface of rigid contact lenses when deciding on lens replacement. Despite this, little research has been undertaken to define this problem. The extent of scratching of rigid contact lens materials was evaluated and this property was related to material oxygen permeability and refractive index. One hundred and forty lenses made from 28 different rigid materials were evaluated in a masked and randomised manner. Scratches were created on the front surface of the lenses using an apparatus that was specifically designed and constructed for this experiment. The extent of scratching was quantitatively evaluated using a computer-based scanning and image analysis system. The oxygen permeability of all materials was measured using the polarographic method. An Atago N3000 hand-held refractometer was used to measure the refractive index of these materials. Three significant correlations were revealed: an inverse relationship (r = -0.813, P < 0.0001) between oxygen permeability and refractive index; a positive relationship (r = 0.511, P < 0.008) between oxygen permeability and the extent of scratching; and an inverse relationship (r = -0.539, P < 0.0058) between refractive index and the extent of scratching. The information generated in this study concerning scratch resistance of rigid contact-lens materials may assist the contact lens industry and contact lens practitioners in developing and prescribing rigid lenses with optimal performance characteristics.

  12. Experimental photoallergic contact dermatitis: a mouse model

    SciTech Connect

    Maguire, H.C. Jr.; Kaidbey, K.

    1982-09-01

    We have induced photoallergic contact dermatitis in mice to 3,3',4',5 tetrachlorosalicylanilide (TCSA), chlorpromazine and 6-methylcoumarin. These compounds are known to produce photoallergic contact dermatitis in humans. The photoallergic contact dermatitis reaction in the mouse is immunologically specific viz. mice photosensitized to TCSA react, by photochallenge, to that compound and not to chlorpromazine, and conversely. The reaction requires UVA at both sensitization and challenge. It appears to be T-cell mediated in that it can be passively transferred to syngeneic mice by lymph node cells from actively sensitized mice, the histology of the reactions resembles that of classic allergic contact dermatitis in mice, challenge reactions are seen at 24 but not at 4 hr, and photoallergic contact dermatitis can be induced in B-cell deficient mice. The availability of a mouse model for the study of photo-ACD will facilitate the identification of pertinent control mechanisms and may aid in the management of the disease. It is likely that a bioassay for photoallergens of humans can be based on this mouse model.

  13. Ohmic contacts to Gallium Nitride materials

    NASA Astrophysics Data System (ADS)

    Greco, Giuseppe; Iucolano, Ferdinando; Roccaforte, Fabrizio

    2016-10-01

    In this review article, a comprehensive study of the mechanisms of Ohmic contact formation on GaN-based materials is presented. After a brief introduction on the physics of Ohmic contacts, a resume of the most important results obtained in literature is reported for each of the systems taken in consideration (n-type GaN, p-type GaN and AlGaN/GaN heterostructures). The optimal metallization schemes and processing conditions to obtain low resistance Ohmic contacts are presented, discussing the role of the single metals composing the stack and the modification induced by the thermal annealing, either on the metal layers or at the interface with GaN. Physical insights on the mechanism of Ohmic contact formation have been gained by correlating the temperature dependence of the electrical parameters with a morphological/structural analysis of the interface. In the case of the AlGaN/GaN systems, the influence of the heterostructure parameters on the Ohmic contacts has been taken into account adapting the classical thermionic field emission model to the presence of the two dimensional electron gas (2DEG). Finally, the state of the art of "Au-free" metallization to AlGaN/GaN heterostructures is also presented, being this latter a relevant topic for the integration of GaN technology on large scale Silicon devices fabs.

  14. Is power grasping contact continuous or discrete?

    PubMed Central

    Pataky, Todd C.; Slota, Greg P.; Latash, Mark L.; Zatsiorsky, Vladimir M.

    2014-01-01

    During power grasp the number of local force maxima reflects either the central nervous system’s preferential use of particular hand regions, or anatomical constraints, or both. Previously both biomdal and trimodal force maxima have been hypothesized for power grasp of a cylindrical handle. Here we measure the number of local force maxima, with a resolution of 4.8°, when performing pushing and pulling efforts in the plane perpendicular to the cylinder’s long axis. Twelve participants produced external forces to eight targets. The number of contacts was defined as the number of local maxima exceeding background variance. A minimum of four and a maximum of five discrete contacts were observed in all subjects at the distal phalanges and metacarpal heads. We thus reject previous hypotheses of bimodal or trimodal force control for cylindrical power grasping. Since we presently observed only 4–5 contacts, which is rather low considering the hand’s kinematic flexibility in the flexion plane, we also reject hypotheses of continuous contact, which are inherent to current grasping taxonomy. A modification to current grasping taxonomy is proposed wherein power grasp contains separate branches for continuous and discrete contacts, and where power and precision grasps are distinguished only by grasp manipulability. PMID:23271322

  15. Is power grasping contact continuous or discrete?

    PubMed

    Pataky, Todd C; Slota, Greg P; Latash, Mark L; Zatsiorsky, Vladimir M

    2013-10-01

    During power grasp, the number of local force maxima reflects either the central nervous system's preferential use of particular hand regions, or anatomical constraints, or both. Previously, both bimodal and trimodal force maxima have been hypothesized for power grasp of a cylindrical handle. Here we measure the number of local force maxima, with a resolution of 4.8°, when performing pushing and pulling efforts in the plane perpendicular to the cylinder's long axis. Twelve participants produced external forces to eight targets. The number of contacts was defined as the number of local maxima exceeding background variance. A minimum of four and a maximum of five discrete contacts were observed in all subjects at the distal phalanges and metacarpal heads. We thus reject previous hypotheses of bimodal or trimodal force control for cylindrical power grasping. Since we presently observed only 4-5 contacts, which is rather low considering the hand's kinematic flexibility in the flexion plane, we also reject hypotheses of continuous contact, which are inherent to current grasping taxonomy. A modification to current grasping taxonomy is proposed wherein power grasp contains separate branches for continuous and discrete contacts, and where power and precision grasps are distinguished only by grasp manipulability. PMID:23271322

  16. Contact sensitivity to preservatives in Turkey.

    PubMed

    Boyvat, Ayse; Akyol, Aynur; Gürgey, Erbak

    2005-06-01

    This study was designed to evaluate the frequency of contact sensitivity to 14 common preservatives among patients with contact dermatitis in Turkey. From 2000 to 2004, 308 patients with the diagnosis of contact dermatitis were patch tested in the Department of Dermatology, Ankara University School of Medicine. All patients were patch tested with European standard series. In addition to the four preservatives included in the standard series, patients were also tested with DMDM hydantoin, imidazolidinyl urea, bromonitropropane diol, diazolidinyl urea, thimerosal, propylene glycol, chlorocresol, chloroxylenol, methyldibromoglutaronitrile/phenoxyethanol (MDBGN/PE) and benzalkonium chloride. Out of the 308 patients suspected of having contact dermatitis, 23 patients were found to have positive reactions to one or more preservatives. Preservatives that were the most frequent cause of positive reactions were thimerosal (1.6%), benzalkonium chloride (1.6%), formaldehyde (1.3%) and MDBGN/PE (0.9%). In our study, 65% of the positive reactions were caused by allergens not present in the standard series, such as thimerosal, benzalkonium chloride and MDBGN/PE. Although thimerosal caused a high rate of contact sensitivity, it may not be considered as an important allergen, because clinical relevance could not be found in any of the patients.

  17. Influence of surface tension on fractal contact model

    NASA Astrophysics Data System (ADS)

    Long, J. M.; Wang, G. F.; Feng, X. Q.; Yu, S. W.

    2014-03-01

    Almost all solid surfaces have roughness on different length scales, from macro, micro to nano. In the conventional fractal contact model, the macroscopic Hertzian contact theory is employed to predict the contact load-area relation for all sizes of contact spots. However, when the contact radius of an asperity shrinks to nanometers, surface tension may greatly alter the contact behavior. In the present paper, we address surface effects on the contact between a rigid sphere and an elastic half space, and we demonstrate that the contact load-area relation is size-dependent, especially for nanosized asperities. Then, the refined contact relation is incorporated into the Majumdar-Bhushan fractal contact model. It is found that the presence of surface tension requires higher load than the conventional fractal contact model to generate the same real contact area.

  18. 'Colored' and Decorative Contact Lenses: A Prescription Is a Must

    MedlinePlus

    ... labeling. (See additional information about cleaning solutions with hydrogen peroxide on the FDA website.) See your eye ... For More Information Decorative Contact Lenses Contact Lenses Hydrogen Peroxide Solution Related Consumer Updates Focusing on Contact ...

  19. Formation Of Ohmic Gold Contacts On Epitaxial GaAs

    NASA Technical Reports Server (NTRS)

    Hecht, Michael H.; Bell, L. Doug; Kaiser, William J.

    1991-01-01

    New low-temperature procedure used to deposit ohmic gold contacts on gallium arsenide epitaxial films, forming ohmic electrical contacts. Keeping wafer in vacuum until metallization prevents formation of rectifying contacts.

  20. Ultrasonic characterization of the contact of components in machine elements

    NASA Astrophysics Data System (ADS)

    Quinn, A. M.; Drinkwater, B. W.; Dwyer-Joyce, R. S.

    2001-04-01

    This paper describes a study of the use of ultrasound to measure the pressure between two machine elements in contact. Relationships between ultrasonic reflection coefficient and pressure have been found both empirically and via a numerical contact model. These relationships were then used to calculate the contact pressure distribution, over a ball-flat contact. Excellent agreement was found between the calculated contact pressure distribution and that predicted by Hertzian contact theory.

  1. Imagining intergroup contact reduces implicit prejudice.

    PubMed

    Turner, Rhiannon N; Crisp, Richard J

    2010-03-01

    Recent research has demonstrated that imagining intergroup contact can be sufficient to reduce explicit prejudice directed towards out-groups. In this research, we examined the impact of contact-related mental imagery on implicit prejudice as measured by the implicit association test. We found that, relative to a control condition, young participants who imagined talking to an elderly stranger subsequently showed more positive implicit attitudes towards elderly people in general. In a second study, we demonstrated that, relative to a control condition, non-Muslim participants who imagined talking to a Muslim stranger subsequently showed more positive implicit attitudes towards Muslims in general. We discuss the implications of these findings for furthering the application of indirect contact strategies aimed at improving intergroup relations.

  2. Contact cleaning of polymer film solar reflectors

    NASA Astrophysics Data System (ADS)

    Sansom, Christopher; Fernández-García, Aránzazu; Sutter, Florian; Almond, Heather; King, Peter

    2016-05-01

    This paper describes the accelerated ageing of polymer film reflecting surfaces under the conditions to be found during contact cleaning of Concentrating Solar Power (CSP) collectors in the presence of dust and sand particles. In these situations, contact cleaning using brushes and water is required to clean the reflecting surfaces. Whilst suitable for glass reflectors, this paper discusses the effects of existing cleaning processes on the optical and visual properties of polymer film surfaces, and then describes the development of a more benign but effective contact cleaning process for cleaning polymer reflectors. The effects of a range of cleaning brushes are discussed, with and without the presence of water, in the presence of sand and dust particles from selected representative locations. Reflectance measurements and visual inspection shows that a soft cleaning brush with a small amount of water can clean polymer film reflecting surfaces without inflicting surface damage or reducing specular reflectance.

  3. Formation of adhesive contacts: spreading versus dewetting.

    PubMed

    Verneuil, E; Clain, J; Buguin, A; Brochard-Wyart, F

    2003-04-01

    A soft bead (radius Rb) is pressed with a force F against a hydrophobic glass plate through a water drop ("wet" JKR set-up). We observe with a fast camera the growth of the contact zone bridging the rubber bead to the glass. Depending on the approach velocity V, two regimes are observed: i) at large V a liquid film is squeezed at the interface and dewets by nucleation and growth of a dry contact; ii) at low velocities, the bead remains nearly spherical. As it comes into contact, the rubber bead spreads on the glass with a characteristic time (in the range of one millisecond) tau approximately eta Rb2/F, where eta is the liquid viscosity. The laws of spreading are interpreted by a balance of global mechanical and viscous forces.

  4. Paederus dermatitis featuring chronic contact dermatitis.

    PubMed

    Stanimirović, Andrija; Skerlev, Mihael; Culav-Košćak, Ivana; Kovačević, Maja

    2013-01-01

    Paederus dermatitis is a distinct variant of acute irritant contact dermatitis caused by mucocutaneous contact with the specific toxin of an insect belonging to the genus Paederus. It is characterized by the sudden onset of erythema and vesiculobullous lesions on exposed skin, with special predilection for the periorbital region. Paederus species have been mostly identified in Africa, Asia, Australia, and Central/South America. We report a 51-year-old woman who experienced 4 recurrences of periorbital erythema and edema in the previous year. No consistent etiology could be established at the beginning. Only after taking a detailed medical history was it discovered that 1 year before our examination, the patient had traveled to Kenya, where she had experienced contact with the insect. This fact led us to the diagnosis of Paederus dermatitis. After appropriate treatment, a complete regression was observed over a 3-week period.

  5. Allergic contact dermatitis to fragrances: part 2.

    PubMed

    Arribas, M P; Soro, P; Silvestre, J F

    2013-01-01

    Allergic contact dermatitis due to fragrances usually manifests as subacute or chronic dermatitis because fragrances are found in a wide range of products to which patients are repeatedly exposed. The typical patient is a middle-aged woman with dermatitis on her hands and face, although other sites may be affected depending on the allergen and the product in which it is found. The standard patch test series of the Spanish Contact Dermatitis and Skin Allergy Research Group (GEIDAC) contains 4 fragrance markers: balsam of Peru, fragrance mix i, fragrance mix ii, and lyral. Testing with a specific fragrance series is recommended in patients with a positive result to any of these 4 markers. The use of a specific fragrance series and new legislation obliging manufacturers to specify the fragrances used in their products, will help to improve the management of allergic contact dermatitis due to fragrances.

  6. On multiscale moving contact line theory

    PubMed Central

    Li, Shaofan; Fan, Houfu

    2015-01-01

    In this paper, a multiscale moving contact line (MMCL) theory is presented and employed to simulate liquid droplet spreading and capillary motion. The proposed MMCL theory combines a coarse-grained adhesive contact model with a fluid interface membrane theory, so that it can couple molecular scale adhesive interaction and surface tension with hydrodynamics of microscale flow. By doing so, the intermolecular force, the van der Waals or double layer force, separates and levitates the liquid droplet from the supporting solid substrate, which avoids the shear stress singularity caused by the no-slip condition in conventional hydrodynamics theory of moving contact line. Thus, the MMCL allows the difference of the surface energies and surface stresses to drive droplet spreading naturally. To validate the proposed MMCL theory, we have employed it to simulate droplet spreading over various elastic substrates. The numerical simulation results obtained by using MMCL are in good agreement with the molecular dynamics results reported in the literature. PMID:26345090

  7. Stability problems in point contact solar cells

    NASA Astrophysics Data System (ADS)

    Gruenbaum, P. E.; Sinton, R. A.; Swanson, R. M.

    Single-crystal silicon point-contact solar cells show a degradation in their efficiency after being exposed to concentrated sunlight. Two mechanisms appear to be responsible: an increase in surface recombination velocity caused by ultraviolet light, possibly due to electron injection from the silicon into the oxide, and a gradual lowering of the effective carrier lifetime that occurs when the cell is under high-level injection for an extended period of time. Point-contact solar cells whose front-side passivation has a phosphorus as well as a thermal oxide diffusion are dramatically more resistant to ultraviolet radiation damage. Modeling results indicate that it is possible to make a point-contact solar cell that is 26.8 percent efficient after massive ultraviolet exposure.

  8. Essential Oils, Part IV: Contact Allergy.

    PubMed

    de Groot, Anton C; Schmidt, Erich

    2016-01-01

    Nearly 80 essential oils (including 2 jasmine absolutes) have caused contact allergy. Fifty-five of these have been tested in consecutive patients suspected of contact dermatitis, and nine (laurel, turpentine, orange, tea tree, citronella, ylang-ylang, sandalwood, clove, and costus root) showed greater than 2% positive patch test reactions. Relevance data are generally missing or inadequate. Most reactions are caused by application of pure oils or high-concentration products. The clinical picture depends on the responsible product. Occupational contact dermatitis may occur in professionals performing massages. The (possible) allergens in essential oils are discussed. Several test allergens are available, but patients should preferably be tested with their own products. Co-reactivity with other essential oils and the fragrance mix is frequent, which may partly be explained by common ingredients. Patch test concentrations for essential oils are suggested. PMID:27427818

  9. Adhesion effects in contact interaction of solids

    NASA Astrophysics Data System (ADS)

    Goryacheva, Irina; Makhovskaya, Yulya

    2008-01-01

    An approach to solving problems of the interaction of axisymmetric elastic bodies in the presence of adhesion is developed. The different natures of adhesion, i.e. capillary adhesion, or molecular adhesion described by the Lennard-Jones potential are examined. The effect of additional loading of the interacting bodies outside the contact zone is also investigated. The approach is based on the representation of the pressure outside the contact zone arising from adhesion by a step function. The analytical solution is obtained and is used to analyze the influence of the form of the adhesion interaction potential, of the surface energy of interacting bodies or the films covering the bodies, their shapes (parabolic, higher power exponential function), volume of liquid in the meniscus, density of contact spots, of elastic modulus and the Poisson ratio on the characteristics of the interaction of the bodies in the presence of adhesion. To cite this article: I. Goryacheva, Y. Makhovskaya, C. R. Mecanique 336 (2008).

  10. Photometric Study of Near Contact Binaries

    NASA Astrophysics Data System (ADS)

    Zhu, L.; Qian, S.

    2009-08-01

    Near Contact Binary (NCB) is a kind of close binary in which both components fill or nearly fill their critical Roche Lobes. They are not in contact like W UMa systems, and show EB-type light variations. These characters make the NCB an interesting object. They are important observational targets which may be lying in key evolutionary states. According to the geometric definition of this subclass, NCBs actually comprise semi-detached with primary filling (SD1) or secondary filling (SD2), marginal-contact (C), and marginal-detached (D) systems. We have observed a group of NCBs (e.g. BL and, GW Tau, AS Ser, UU Lyn, RU UMi, GSC3658-0076 etc. ) and constructed an evolutionary sequence of case A mass transfer in observation. Finally, the available orbital period variations and absolute parameters of NCBs are collected and the preliminary statistical results are presented.

  11. Microwave sterilization of hydrophilic contact lenses.

    PubMed

    Rohrer, M D; Terry, M A; Bulard, R A; Graves, D C; Taylor, E M

    1986-01-15

    We used standard 2,450-MHz microwave irradiation to achieve sterilization of hydrophilic contact lenses contaminated with a variety of bacterial, fungal, and viral corneal pathogens. A three-dimensional rotisserie was used to overcome the problem of "cold spots" within the microwave oven. The contact lenses became dehydrated in approximately two minutes. Rehydration with normal saline restored their shape and appearance. The time necessary to prohibit all growth of the bacterial and fungal organisms studied ranged from 45 seconds to eight minutes. All viral contaminants were completely inactivated after four minutes of microwave exposure. Refractive properties were unaffected after 101 exposures to microwaves for ten minutes. Slit-lamp examination and scanning electron microscopy disclosed minute particles on the surface of these contact lenses but no damage to the lens matrix from irradiation. PMID:3942177

  12. Atomistic Simulation of Single Asperity Contact

    NASA Astrophysics Data System (ADS)

    Philip; Kromer; Marder, Michael

    2003-03-01

    In the standard (Bowden and Tabor) model of friction, the macroscopic behavior of sliding results from the deformation of microscopic asperities in contact. A recent idea instead extracts macroscopic friction from the aggregate behavior of traveling, self-healing interfacial cracks: certain families of cracks are found to be mathematically forbidden, and the envelope of allowed cracks dictates the familiar Coulomb law of friction. To explore the connection between the new and traditional pictures of friction, we conducted molecular dynamics (MD) simulations of single-asperity contact subjected to an oscillatory sliding force -- a geometry important for the problem of fretting (damage due to small-scale vibratory contact). Our simulations reveal the importance of traveling interface cracks to the dynamics of slip at the interface, and illuminate the dynamics of crack initiation and suppression.

  13. Modeling the emergence of contact languages.

    PubMed

    Tria, Francesca; Servedio, Vito D P; Mufwene, Salikoko S; Loreto, Vittorio

    2015-01-01

    Contact languages are born out of the non-trivial interaction of two (or more) parent languages. Nowadays, the enhanced possibility of mobility and communication allows for a strong mixing of languages and cultures, thus raising the issue of whether there are any pure languages or cultures that are unaffected by contact with others. As with bacteria or viruses in biological evolution, the evolution of languages is marked by horizontal transmission; but to date no reliable quantitative tools to investigate these phenomena have been available. An interesting and well documented example of contact language is the emergence of creole languages, which originated in the contacts of European colonists and slaves during the 17th and 18th centuries in exogenous plantation colonies of especially the Atlantic and Indian Ocean. Here, we focus on the emergence of creole languages to demonstrate a dynamical process that mimics the process of creole formation in American and Caribbean plantation ecologies. Inspired by the Naming Game (NG), our modeling scheme incorporates demographic information about the colonial population in the framework of a non-trivial interaction network including three populations: Europeans, Mulattos/Creoles, and Bozal slaves. We show how this sole information makes it possible to discriminate territories that produced modern creoles from those that did not, with a surprising accuracy. The generality of our approach provides valuable insights for further studies on the emergence of languages in contact ecologies as well as to test specific hypotheses about the peopling and the population structures of the relevant territories. We submit that these tools could be relevant to addressing problems related to contact phenomena in many cultural domains: e.g., emergence of dialects, language competition and hybridization, globalization phenomena.

  14. Microparticle assembly and contact line dynamics

    NASA Astrophysics Data System (ADS)

    Ghosh, Moniraj

    This thesis addresses three topics. First, microparticle assembly on solid surfaces from an evaporative suspension is studied. It is well known that microparticles collect near three phase contact lines owing to evaporative fluxes. In a dip coating configuration, if the evaporative flux and plate withdrawal velocity U are matched, large colloidal crystals form. Here, I investigate the consequences of varying the plate withdrawal rate, and find that periodic striped patterns emerge which depend strongly on U. The stripes form when three phase contact lines "jump", or recede rapidly, upon detaching from well-wet particle aggregates on less wet substrates. Stripe width, spacing and height change abruptly at a transition velocity which can be related to a Landau-Levich transition in the flow. The second part of my thesis is a numerical simulation of drop spreading and retraction as a function of drop scale. The drop moves over a thin liquid film, and drop motion is initiated by an impulsive change in surface wettability. Owing to the presence of the film, these simulations require no closure condition at the 'apparent' contact line. Rather, relationships emerge between the contact line velocity and the dynamic contact angle. For nanoscopic drops, molecular effects dominate the drop motion. For drops an order of magnitude larger than the thin film, regimes emerge in which drops move according to Tanner's law, a relationship derived for macroscopic drops. Drop retraction is considerably more rapid than spreading owing to rapid dewetting events near the contact line. This thesis concludes with a discussion of a technique for creating multifunctional surfaces presenting discrete patches of several proteins. The technique relies on microcontact printing (microCP) to define active regions, and the use of a microfluidics device to deliver proteins to those regions. The surfaces are used to capture cells from a suspension, to sort cells from a mixed suspension, and to study

  15. Modeling the Emergence of Contact Languages

    PubMed Central

    Tria, Francesca; Servedio, Vito D.P.; Mufwene, Salikoko S.; Loreto, Vittorio

    2015-01-01

    Contact languages are born out of the non-trivial interaction of two (or more) parent languages. Nowadays, the enhanced possibility of mobility and communication allows for a strong mixing of languages and cultures, thus raising the issue of whether there are any pure languages or cultures that are unaffected by contact with others. As with bacteria or viruses in biological evolution, the evolution of languages is marked by horizontal transmission; but to date no reliable quantitative tools to investigate these phenomena have been available. An interesting and well documented example of contact language is the emergence of creole languages, which originated in the contacts of European colonists and slaves during the 17th and 18th centuries in exogenous plantation colonies of especially the Atlantic and Indian Ocean. Here, we focus on the emergence of creole languages to demonstrate a dynamical process that mimics the process of creole formation in American and Caribbean plantation ecologies. Inspired by the Naming Game (NG), our modeling scheme incorporates demographic information about the colonial population in the framework of a non-trivial interaction network including three populations: Europeans, Mulattos/Creoles, and Bozal slaves. We show how this sole information makes it possible to discriminate territories that produced modern creoles from those that did not, with a surprising accuracy. The generality of our approach provides valuable insights for further studies on the emergence of languages in contact ecologies as well as to test specific hypotheses about the peopling and the population structures of the relevant territories. We submit that these tools could be relevant to addressing problems related to contact phenomena in many cultural domains: e.g., emergence of dialects, language competition and hybridization, globalization phenomena. PMID:25875371

  16. Modeling the emergence of contact languages.

    PubMed

    Tria, Francesca; Servedio, Vito D P; Mufwene, Salikoko S; Loreto, Vittorio

    2015-01-01

    Contact languages are born out of the non-trivial interaction of two (or more) parent languages. Nowadays, the enhanced possibility of mobility and communication allows for a strong mixing of languages and cultures, thus raising the issue of whether there are any pure languages or cultures that are unaffected by contact with others. As with bacteria or viruses in biological evolution, the evolution of languages is marked by horizontal transmission; but to date no reliable quantitative tools to investigate these phenomena have been available. An interesting and well documented example of contact language is the emergence of creole languages, which originated in the contacts of European colonists and slaves during the 17th and 18th centuries in exogenous plantation colonies of especially the Atlantic and Indian Ocean. Here, we focus on the emergence of creole languages to demonstrate a dynamical process that mimics the process of creole formation in American and Caribbean plantation ecologies. Inspired by the Naming Game (NG), our modeling scheme incorporates demographic information about the colonial population in the framework of a non-trivial interaction network including three populations: Europeans, Mulattos/Creoles, and Bozal slaves. We show how this sole information makes it possible to discriminate territories that produced modern creoles from those that did not, with a surprising accuracy. The generality of our approach provides valuable insights for further studies on the emergence of languages in contact ecologies as well as to test specific hypotheses about the peopling and the population structures of the relevant territories. We submit that these tools could be relevant to addressing problems related to contact phenomena in many cultural domains: e.g., emergence of dialects, language competition and hybridization, globalization phenomena. PMID:25875371

  17. Modelling of heavily loaded lubricated contacts

    NASA Astrophysics Data System (ADS)

    Sadeghi, Farshid; McClug, William D., Jr.; Kim, Kyung-Hoon; Osborn, Kevin; Lance, Brian

    1992-02-01

    Thermal elastohydrodynamic (EHD) lubrication of rolling/sliding line contacts is investigated to develop an interactive computer program for prediction of lubrication system performance. The user inputs lubricant and mechanical system physical properties as well as operating conditions of load and speed for calculation of contact zone pressure, temperature, traction, and stresses. This program is one of the first to include thermal effects in calculations and, therefore, can more accurately assess the critical tribological performance parameters at high load and speed conditions than previous prediction models. The program is written in the FORTRAN language and utilizes a UNIX operating system for high quality graphic output allowing easy visualization of results.

  18. [Contact eczema in patients with leg ulcers].

    PubMed

    Degreef, H; Dooms-Goossens, A; Gladys, K

    1986-01-01

    Patients with leg ulcers or varicose eczema suffer much more often from contact eczema due to the local application of pharmaceutical preparations than patients suffering from other dermatological problems (even those of eczematous origin). This contact allergy may concern not only the active ingredient but also the excipient, the preservative, or even the perfume. In all cases of leg ulcers, of varicose eczema, but also of badly healed ulcers, epicutaneous tests should be carried out with all the components of the pharmaceutical preparations concerned. Moreover, the pharmaceutical industry really must perfect non-allergenic preparations.

  19. Allergic contact dermatitis in atopic dermatitis.

    PubMed

    Lever, R; Forsyth, A

    1992-01-01

    Of 73 adult patients attending a clinic specially provided to treat patients with atopic dermatitis, 31 (42%) showed one or more positive patch reaction on contact testing. There was a striking female preponderance in the patch test positive group (26F:5M) in contrast to those with negative test results (9F:17M). The commonest allergens identified were fragrances in 13 patients, nickel (7), rubber (5), lanolin (4) and formaldehyde (3). In 21 patients, topical preparations, cosmetic or medically prescribed, could be implicated. Contact sensitivity seems to be relatively common in adult patients who have a continuing problem with their atopic dermatitis. Recognizing this sensitization may be important in their management.

  20. Depigmented contact dermatitis due to incense.

    PubMed

    Hayakawa, R; Matsunaga, K; Arima, Y

    1987-05-01

    A 63-year-old male school teacher with itchy depigmented macules on his left dorsum manus, left shoulder and abdomen presented at our clinic on 8 July 1986. He had practiced the incense ceremony for about 15 years, and had burnt several incenses and sandalwood. 48 h closed patch testing revealed perfume in the incenses was the cause. We assumed that perfume in the incense was volatized in air when incense was burnt; skin surface contact occurred with airborne particle, which dissolved in sebum; thus allergic contact dermatitis accompanied by depigmentation might arise.

  1. Cheilitis, perioral dermatitis and contact allergy.

    PubMed

    Collet, Evelyne; Jeudy, Géraldine; Dalac, Sophie

    2013-01-01

    Cheilitis is a superficial inflammatory condition of the lip. It can occur either alone or be associated with stomatitis or perioral eczema. Contact hypersensitivity reactions are a frequent cause of cheilitis. Cosmetic and hygiene products are the most usual causes. Less frequently, allergic cheilitis is caused by contact with musical instruments, topical medicines or food allergens. Cases of cheilitis induced by dental material are rare and debated. The diagnosis relies on patch tests, which start with the European baseline series and the patient's personal cosmetic and topical products. This investigation will then be completed by the ingredients in the topical products and specific test series.

  2. Surface roughness effects in elastohydrodynamic contacts

    NASA Technical Reports Server (NTRS)

    Tripp, J. H.; Hamrock, B. J.

    1985-01-01

    Surface roughness effects in full-film EHL contacts were studied. A flow factor modification to the Reynolds equation was applied to piezoviscous-elastic line contacts. Results for ensemble-averaged film shape, pressure distribution, and other mechanical quantities were obtained. Asperities elongated in the flow direction by a factor exceeding two decreased both film shape and pressure extrema at constant load; isotropic or transverse asperities increased these extrema. The largest effects are displayed by traction, which increased by over 5% for isotropic or transverse asperities and by slightly less for longitudinal roughness.

  3. The Use of Contact Lenses as Biosensors.

    PubMed

    Phan, Chau-Minh; Subbaraman, Lakshman; Jones, Lyndon W

    2016-04-01

    : The tear film is a complex multilayer film consisting of various proteins, enzymes, and lipids and can express a number of biomarkers in cases of disease. The development of a contact lens sensor presents a noninvasive alternative for the detection and management of various diseases. Recent work has resulted in the commercialization of a device to monitor intraocular pressure for up to 24 h, and there are extensive efforts underway to develop a contact lens sensor capable of continuous glucose tear film monitoring to manage diabetes. This clinical perspective will highlight the major developments within this field and list some of the major challenges that still need to be addressed. PMID:26657694

  4. National directory of space grant contacts

    NASA Technical Reports Server (NTRS)

    1995-01-01

    In this directory of space grant contacts of the NASA Space Grant College and Fellowship Program a listing of participating universities and other institutions are shown from all 50 states and from the District of Columbia and Puerto Rico. These 52 Space Grant State consortia currently consist of 395 institutions of higher learning, 66 industry affiliates, 26 state/local government offices, 40 nonprofit organizations, and 25 other educational entities. This directory is organized alphabetically by state and the contacts, addresses, phone numbers, and internet email addresses (where available) are included.

  5. [Dermatitis from contact with Agave americana].

    PubMed

    Golan, H; Landau, M; Goldberg, I; Brenner, S

    2000-10-01

    Various plants induce dermatitis in man. There have been only a few published cases of contact dermatitis caused by Agave americana (AA). We report intentional exposure to AA in a soldier seeking sick leave, and review our previously reported cases. Treatment with oral antihistamines and topical saline compresses resulted in subsidence of the systemic symptoms within 24 h and regression of cutaneous manifestations in 7-10 days. Physicians should be alert to the possibility of self-inflicted contact dermatitis induced by exposure to plants, especially to A. americana. Systemic signs may accompany the cutaneous lesions.

  6. Experimental investigation of contact angle, curvature, and contact line motion in dropwise condensation and evaporation.

    PubMed

    Gokhale, Shripad J; Plawsky, Joel L; Wayner, Peter C

    2003-03-15

    Image-analyzing interferometry is used to measure the apparent contact angle and the curvature of a drop and a meniscus during condensation and evaporation processes in a constrained vapor bubble (CVB) cell. The apparent contact angle is found to be a function of the interfacial mass flux. The interfacial velocity for the drop during condensation and evaporation is a function of the apparent contact angle and the rate of change of radius of curvature. The dependence of velocity on the apparent contact angle is consistent with Tanner's scaling equation. The results support the hypothesis that evaporation/condensation is an important factor in contact line motion. The main purpose of this article is to present the experimental technique and the data. The equilibrium contact angle for the drop is found experimentally to be higher than that for the corner meniscus. The contact angle is a function of the stress field in the fluid. The equilibrium contact angle is related to the thickness of the thin adsorbed film in the microscopic region and depends on the characteristics of the microscopic region. The excess interfacial free energy and temperature jump were used to calculate the equilibrium thickness of the thin adsorbed film in the microscopic region.

  7. Experimental investigation on the electrical contact behavior of rolling contact connector

    SciTech Connect

    Chen, Junxing; Yang, Fei Luo, Kaiyu; Zhu, Mingliang; Wu, Yi; Rong, Mingzhe

    2015-12-15

    Rolling contact connector (RCC) is a new technology utilized in high performance electric power transfer systems with one or more rotating interfaces, such as radars, satellites, wind generators, and medical computed tomography machines. Rolling contact components are used in the RCC instead of traditional sliding contacts to transfer electrical power and/or signal. Since the requirement of the power transmission is increasing in these years, the rolling electrical contact characteristics become more and more important for the long-life design of RCC. In this paper, a typical form of RCC is presented. A series of experimental work are carried out to investigate the rolling electrical contact characteristics during its lifetime. The influence of a variety of factors on the electrical contact degradation behavior of RCC is analyzed under both vacuum and air environment. Based on the surface morphology and elemental composition changes in the contact zone, which are assessed by field emission scanning electron microscope and confocal laser scanning microscope, the mechanism of rolling electrical contact degradation is discussed.

  8. Salient Stages in Contact-Induced Grammatical Change: Evidence from Synchronic vs. Diachronic Contact Situations

    ERIC Educational Resources Information Center

    Backus, Ad; Dogruoz, A. Seza; Heine, Bernd

    2011-01-01

    Contact between languages often leads to linguistic changes. Although the social factors and the typological characteristics of the languages influence the change process, the interaction between these factors is not well-known. This is partially due to the fact that the long-term and short-term effects of language contact are rarely brought…

  9. Experimental investigation on the electrical contact behavior of rolling contact connector.

    PubMed

    Chen, Junxing; Yang, Fei; Luo, Kaiyu; Zhu, Mingliang; Wu, Yi; Rong, Mingzhe

    2015-12-01

    Rolling contact connector (RCC) is a new technology utilized in high performance electric power transfer systems with one or more rotating interfaces, such as radars, satellites, wind generators, and medical computed tomography machines. Rolling contact components are used in the RCC instead of traditional sliding contacts to transfer electrical power and/or signal. Since the requirement of the power transmission is increasing in these years, the rolling electrical contact characteristics become more and more important for the long-life design of RCC. In this paper, a typical form of RCC is presented. A series of experimental work are carried out to investigate the rolling electrical contact characteristics during its lifetime. The influence of a variety of factors on the electrical contact degradation behavior of RCC is analyzed under both vacuum and air environment. Based on the surface morphology and elemental composition changes in the contact zone, which are assessed by field emission scanning electron microscope and confocal laser scanning microscope, the mechanism of rolling electrical contact degradation is discussed. PMID:26724076

  10. Experimental investigation on the electrical contact behavior of rolling contact connector.

    PubMed

    Chen, Junxing; Yang, Fei; Luo, Kaiyu; Zhu, Mingliang; Wu, Yi; Rong, Mingzhe

    2015-12-01

    Rolling contact connector (RCC) is a new technology utilized in high performance electric power transfer systems with one or more rotating interfaces, such as radars, satellites, wind generators, and medical computed tomography machines. Rolling contact components are used in the RCC instead of traditional sliding contacts to transfer electrical power and/or signal. Since the requirement of the power transmission is increasing in these years, the rolling electrical contact characteristics become more and more important for the long-life design of RCC. In this paper, a typical form of RCC is presented. A series of experimental work are carried out to investigate the rolling electrical contact characteristics during its lifetime. The influence of a variety of factors on the electrical contact degradation behavior of RCC is analyzed under both vacuum and air environment. Based on the surface morphology and elemental composition changes in the contact zone, which are assessed by field emission scanning electron microscope and confocal laser scanning microscope, the mechanism of rolling electrical contact degradation is discussed.

  11. The Touch "Taboo" and the Art of Contact: An Exploration of Contact Improvisation for Prisoners

    ERIC Educational Resources Information Center

    Houston, Sara

    2009-01-01

    The article examines the experience of participating in Contact Improvisation by male prisoners. It specifically focuses on issues of touch for this participant group and how inmates can learn different ways of acting from acquiring Contact skills, contributing to their rehabilitation. The paper looks at the culture in prisons that propagates a…

  12. Contact as a Tool for Peace Education? Reconsidering the Contact Hypothesis from the Children's Perspectives

    ERIC Educational Resources Information Center

    Tomovska, Ana

    2010-01-01

    The contact hypothesis has arguably been the leading theoretical paradigm for educational interventions in divided societies. However most of the studies with children have been quantitative, focusing on contact outcomes and failing to take account of children's views. Therefore this paper presents the findings of a qualitative study of…

  13. Making Contact. Generating Interethnic Contact for Multicultural Integration and Tolerance in Amsterdam

    ERIC Educational Resources Information Center

    Muller, Floris

    2012-01-01

    Interethnic contact is considered a potent tool for the generation of interethnic understanding and tolerance. This faith has engendered countless social projects that seek to stimulate contact between members of different ethnic groups under "optimal conditions". However, the academic literature does not stipulate how, if at all, these optimal…

  14. Follicular contact dermatitis revisited: A review emphasizing neomycin-associated follicular contact dermatitis

    PubMed Central

    Cohen, Philip R

    2014-01-01

    Follicular contact dermatitis clinically presents as individual papules that include a central hair follicle. Pathologic features involve the follicle and the surrounding dermis: spongiosis and vesicle formation of the follicular epithelium associated with perifollicular and perivascular lymphocytic inflammation. Using the PubMed database, an extensive literature search was performed on follicular contact dermatitis and neomycin. Relevant papers were reviewed and the clinical and pathologic features, the associated chemicals (including a more detailed description of neomycin), the hypothesized pathogenesis, and the management of follicular contact dermatitis were described. Several agents-either as allergens or irritants-have been reported to elicit follicular contact dermatitis. Several hypotheses have been suggested for the selective involvement of the follicles in follicular contact dermatitis: patient allergenicity, characteristics of the agent, vehicle containing the agent, application of the agent, and external factors. The differential diagnosis of follicular contact dermatitis includes not only recurrent infundibulofolliculitis, but also drug eruption, mite infestation, viral infection, and dermatoses that affect hair follicles. The primary therapeutic intervention for follicular contact dermatitis is withdrawal of the causative agent; treatment with a topical corticosteroid preparation may also promote resolution of the dermatitis. In conclusion, follicular contact dermatitis may be secondary to allergens or irritants; topical antibiotics, including neomycin, may cause this condition. Several factors may account for the selective involvement of the hair follicle in this condition. Treatment of the dermatitis requires withdrawal of the associated topical agent; in addition, topical corticosteroids may be helpful to promote resolution of lesions. PMID:25516854

  15. Experimental investigation on the electrical contact behavior of rolling contact connector

    NASA Astrophysics Data System (ADS)

    Chen, Junxing; Yang, Fei; Luo, Kaiyu; Zhu, Mingliang; Wu, Yi; Rong, Mingzhe

    2015-12-01

    Rolling contact connector (RCC) is a new technology utilized in high performance electric power transfer systems with one or more rotating interfaces, such as radars, satellites, wind generators, and medical computed tomography machines. Rolling contact components are used in the RCC instead of traditional sliding contacts to transfer electrical power and/or signal. Since the requirement of the power transmission is increasing in these years, the rolling electrical contact characteristics become more and more important for the long-life design of RCC. In this paper, a typical form of RCC is presented. A series of experimental work are carried out to investigate the rolling electrical contact characteristics during its lifetime. The influence of a variety of factors on the electrical contact degradation behavior of RCC is analyzed under both vacuum and air environment. Based on the surface morphology and elemental composition changes in the contact zone, which are assessed by field emission scanning electron microscope and confocal laser scanning microscope, the mechanism of rolling electrical contact degradation is discussed.

  16. Comparison of Gap Elements and Contact Algorithm for 3D Contact Analysis of Spiral Bevel Gears

    NASA Technical Reports Server (NTRS)

    Bibel, G. D.; Tiku, K.; Kumar, A.; Handschuh, R.

    1994-01-01

    Three dimensional stress analysis of spiral bevel gears in mesh using the finite element method is presented. A finite element model is generated by solving equations that identify tooth surface coordinates. Contact is simulated by the automatic generation of nonpenetration constraints. This method is compared to a finite element contact analysis conducted with gap elements.

  17. Contact activation of blood-plasma coagulation

    NASA Astrophysics Data System (ADS)

    Golas, Avantika

    Surface engineering of biomaterials with improved hemocompatibility is an imperative, given the widespread global need for cardiovascular devices. Research summarized in this dissertation focuses on contact activation of FXII in buffer and blood plasma frequently referred to as autoactivation. The extant theory of contact activation imparts FXII autoactivation ability to negatively charged, hydrophilic surfaces. According to this theory, contact activation of plasma involves assembly of proteins comprising an "activation complex" on activating surfaces mediated by specific chemical interactions between complex proteins and the surface. This work has made key discoveries that significantly improve our core understanding of contact activation and unravel the existing paradigm of plasma coagulation. It is shown herein that contact activation of blood factor XII (FXII, Hageman factor) in neat-buffer solution exhibits a parabolic profile when scaled as a function of silanized-glass-particle activator surface energy (measured as advancing water adhesion tension t°a=g° Iv costheta in dyne/cm, where g°Iv is water interfacial tension in dyne/cm and theta is the advancing contact angle). Nearly equal activation is observed at the extremes of activator water-wetting properties --36 < t°a < 72 dyne/cm (O° ≤ theta < 120°), falling sharply through a broad minimum within the 20 < t°a < 40 dyne/cm (55° < theta < 75°). Furthermore, contact activation of FXII in buffer solution produces an ensemble of protein fragments exhibiting either procoagulant properties in plasma (proteolysis of blood factor XI or prekallikrein), amidolytic properties (cleavage of s-2302 chromogen), or the ability to suppress autoactivation through currently unknown biochemistry. The relative proportions of these fragments depend on activator surface chemistry/energy. We have also discovered that contact activation is moderated by adsorption of plasma proteins unrelated to coagulation through an

  18. Promoting intergroup contact by changing beliefs: group malleability, intergroup anxiety, and contact motivation.

    PubMed

    Halperin, Eran; Crisp, Richard J; Husnu, Shenel; Trzesniewski, Kali H; Dweck, Carol S; Gross, James J

    2012-12-01

    Intergroup contact plays a crucial role in moderating long-term conflicts. Unfortunately, the motivation to make contact with outgroup members is usually very low in such conflicts. We hypothesized that one limiting factor is the belief that groups cannot change, which leads to increased intergroup anxiety and decreased contact motivation. To test this hypothesis, we experimentally manipulated beliefs about group malleability in the context of the conflict between Greek and Turkish Cypriots and then assessed intergroup anxiety and motivation to engage in intergroup contact. Turkish Cypriots who were led to believe that groups can change (with no mention of the specific groups involved) reported lower levels of intergroup anxiety and higher motivation to interact and communicate with Greek Cypriots in the future, compared with those who were led to believe that groups cannot change. This effect of group malleability manipulation on contact motivation was mediated by intergroup anxiety. PMID:22642339

  19. How Tibiofemoral Alignment and Contact Locations Affect Predictions of Medial and Lateral Tibiofemoral Contact Forces

    PubMed Central

    Lerner, Zachary F.; DeMers, Matthew S.; Delp, Scott L.; Browning, Raymond C.

    2015-01-01

    Understanding degeneration of biological and prosthetic knee joints requires knowledge of the in-vivo loading environment during activities of daily living. Musculoskeletal models can estimate medial/lateral tibiofemoral compartment contact forces, yet anthropometric differences between individuals make accurate predictions challenging. We developed a full-body OpenSim musculoskeletal model with a knee joint that incorporates subject-specific tibiofemoral alignment (i.e. knee varus-valgus) and geometry (i.e. contact locations). We tested the accuracy of our model and determined the importance of these subject-specific parameters by comparing estimated to measured medial and lateral contact forces during walking in an individual with an instrumented knee replacement and post-operative genu valgum (6°). The errors in the predictions of the first peak medial and lateral contact force were 12.4% and 11.9%, respectively, for a model with subject-specific tibiofemoral alignment and contact locations determined via radiographic analysis, vs. 63.1% and 42.0%, respectively, for a model with generic parameters. We found that each degree of tibiofemoral alignment deviation altered the first peak medial compartment contact force by 51N (r2=0.99), while each millimeter of medial-lateral translation of the compartment contact point locations altered the first peak medial compartment contact force by 41N (r2=0.99). The model, available at www.simtk.org/home/med-lat-knee/, enables the specification of subject-specific joint alignment and compartment contact locations to more accurately estimate medial and lateral tibiofemoral contact forces in individuals with non-neutral alignment. PMID:25595425

  20. Thermal conductance of carbon nanotube contacts: Molecular dynamics simulations and general description of the contact conductance

    NASA Astrophysics Data System (ADS)

    Salaway, Richard N.; Zhigilei, Leonid V.

    2016-07-01

    The contact conductance of carbon nanotube (CNT) junctions is the key factor that controls the collective heat transfer through CNT networks or CNT-based materials. An improved understanding of the dependence of the intertube conductance on the contact structure and local environment is needed for predictive computational modeling or theoretical description of the effective thermal conductivity of CNT materials. To investigate the effect of local structure on the thermal conductance across CNT-CNT contact regions, nonequilibrium molecular dynamics (MD) simulations are performed for different intertube contact configurations (parallel fully or partially overlapping CNTs and CNTs crossing each other at different angles) and local structural environments characteristic of CNT network materials. The results of MD simulations predict a stronger CNT length dependence present over a broader range of lengths than has been previously reported and suggest that the effect of neighboring junctions on the conductance of CNT-CNT junctions is weak and only present when the CNTs that make up the junctions are within the range of direct van der Waals interaction with each other. A detailed analysis of the results obtained for a diverse range of intertube contact configurations reveals a nonlinear dependence of the conductance on the contact area (or number of interatomic intertube interactions) and suggests larger contributions to the conductance from areas of the contact where the density of interatomic intertube interactions is smaller. An empirical relation accounting for these observations and expressing the conductance of an arbitrary contact configuration through the total number of interatomic intertube interactions and the average number of interatomic intertube interactions per atom in the contact region is proposed. The empirical relation is found to provide a good quantitative description of the contact conductance for various CNT configurations investigated in the MD

  1. Solar cell with improved electrical contacts

    SciTech Connect

    Cavicchi, B.T.; Dill, H.G.; Zemmrich, D.K.

    1987-10-06

    A solar cell is described comprising: a first layer of semiconductor material of a first conductivity type; a second layer of semiconductor material of a second opposite conductivity type disposed on the first layer forming a semiconductor junction therebetween. The first and second layers having first and second major essentially parallel surfaces, respectively, essentially parallel to the semiconductor junction; a layer of aluminum gallium arsenide semiconductor material of the second conductivity type disposed on the second major surface and having an exposed front major surface essentially parallel to the second major surface and further having grooves extending vertically to the second layer; electrically conductive material filling the grooves and electrically contacting the second layer to form metallic contact lines; a flat conductive bar transversely disposed on the exposed front major surface across the grooves and making electrical contact ot the electrically conductive material in the grooves; an electrically conductive flat strip disposed on the exposed major surface and spaced apart from the conductive bar; and at least one electrically conductive bridge electrically coupling the conductive bar to the contact strip.

  2. Dynamic contact angle cycling homogenizes heterogeneous surfaces.

    PubMed

    Belibel, R; Barbaud, C; Mora, L

    2016-12-01

    In order to reduce restenosis, the necessity to develop the appropriate coating material of metallic stent is a challenge for biomedicine and scientific research over the past decade. Therefore, biodegradable copolymers of poly((R,S)-3,3 dimethylmalic acid) (PDMMLA) were prepared in order to develop a new coating exhibiting different custom groups in its side chain and being able to carry a drug. This material will be in direct contact with cells and blood. It consists of carboxylic acid and hexylic groups used for hydrophilic and hydrophobic character, respectively. The study of this material wettability and dynamic surface properties is of importance due to the influence of the chemistry and the potential motility of these chemical groups on cell adhesion and polymer kinetic hydrolysis. Cassie theory was used for the theoretical correction of contact angles of these chemical heterogeneous surfaces coatings. Dynamic Surface Analysis was used as practical homogenizer of chemical heterogeneous surfaces by cycling during many cycles in water. In this work, we confirmed that, unlike receding contact angle, advancing contact angle is influenced by the difference of only 10% of acidic groups (%A) in side-chain of polymers. It linearly decreases with increasing acidity percentage. Hysteresis (H) is also a sensitive parameter which is discussed in this paper. Finally, we conclude that cycling provides real information, thus avoiding theoretical Cassie correction. H(10)is the most sensible parameter to %A. PMID:27612817

  3. Optical Measurements of Cavitation in Tribological Contacts

    NASA Astrophysics Data System (ADS)

    Tang, Tian; Morris, Nick; Coupland, Jeremy

    2015-12-01

    The paper describes the use of a white light interformeter to measure the cavitation bubble and oil film thickness in a tribological contact and compares the results to theory. It is found that oil film thickness is best predicted by the theory proposed by Coyne and Elrod.

  4. Multiple Causation in Language Contact Change.

    ERIC Educational Resources Information Center

    Joseph, Brian D.

    Analysis of a specific language change--the loss of the Balkan infinitive--demonstrates the inadequacy of either a language-internal or a language-contact explanation in accounting for the change. A composite explanation, in which the infinitive-loss process is explained through multiple causation, seems more appropriate. Whithin the language,…

  5. Business as a Site of Language Contact.

    ERIC Educational Resources Information Center

    Harris, Sandra; Bargiela-Chiappini, Francesca

    2003-01-01

    Discusses the field of language for business. Argues for redressing the balance of research into business as a site of language contact in favor of less well-represented languages and cultures through indigenous discourse studies, and notes the increasing frequency and importance of work involving Asian languages. (Author/VWL)

  6. Advertising as a Site of Language Contact.

    ERIC Educational Resources Information Center

    Piller, Ingrid

    2003-01-01

    Reviews work on language contact phenomena in advertising. More emphasis is being placed on multilingual discourses in advertising and the ways in which these index identities, both of the products and services with which multiple cods are associated and of the consumers who peruse them. Also examines the various functions of different contact…

  7. Fully flooded elastohydrodynamic lubricated elliptical contacts

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.

    1980-01-01

    Emphasis is on fully flooded, elastohydrodynamic lubricated, elliptical contacts. A fully flooded conjunction is one in which the film thickness is not significantly changed when the amount of lubricant is increased. A brief description of the relevant equations used in the elastohydrodynamic lubrication of elliptical contacts is given. The most important practical aspect of the elastohydrodynamic theory is the determination of the minimum film thickness within the contact. The maintenance of a fluid film of adequate magnitude is an essential feature of the correct operation of lubricated machine elements. The results presented show the influence of contact geometry on minimum film thickness as expressed by the ellipticity parameter and the dimensionless speed, load, and materials parameters. Film thickness equations are developed for materials of high elastic modulus, such as metal, and for materials of low elastic modulus, such as rubber. In addition to the film thickness equations that are developed, plots of pressure and film thickness are presented. These theoretical solutions for film thickness have all the essential features of previously reported experimental observations based on optical interferometry. Correlation between theory and experiments is also presented.

  8. The Induction of Mental and Contact Contamination

    ERIC Educational Resources Information Center

    Lee, Michelle; Shafran, Roz; Burgess, Charlotte; Carpenter, Jodi; Millard, Emma; Thorpe, Susan

    2013-01-01

    Background: Extreme fear of contamination within obsessive compulsive disorder (OCD) is traditionally conceptualised as a physical phenomenon. More recent research has supported the notion of "mental" contamination (MC) in which people feel contaminated in the absence of physical contact. The current research sought to determine whether feelings…

  9. Expansion Compression Contacts for Thermoelectric Legs

    NASA Technical Reports Server (NTRS)

    Sakamoto, Jeffrey

    2009-01-01

    In a proposed alternative to previous approaches to making hot-shoe contacts to the legs of thermoelectric devices, one relies on differential thermal expansion to increase contact pressures for the purpose of reducing the electrical resistances of contacts as temperatures increase. The proposed approach is particularly applicable to thermoelectric devices containing p-type (positive-charge-carrier) legs made of a Zintl compound (specifically, Yb14MnSb11) and n-type (negative charge-carrier) legs made of SiGe. This combination of thermoelectric materials has been selected for further development, primarily on the basis of projected thermoelectric performance. However, it is problematic to integrate, into a practical thermoelectric device, legs made of these materials along with a metal or semiconductor hot shoe that is required to be in thermal and electrical contact with the legs. This is partly because of the thermal-expansion mismatch of these materials: The coefficient of thermal expansion (CTE) of SiGe is 4.5 x 10(exp -6) C (exp -1), while the CTE of Yb14MnSb11 is 20 x 10(exp -6) C(exp -1). Simply joining a Yb14MnSb11 and a SiGe leg to a common hot shoe could be expected to result in significant thermal stresses in either or both legs during operation. Heretofore, such thermal stresses have been regarded as disadvantageous. In the proposed approach, stresses resulting from the CTE mismatch would be turned to advantage.

  10. Contact dermatitis caused by ECG electrode paste.

    PubMed

    Cochran, R J; Rosen, T

    1980-12-01

    A case of contact dermatitis caused by ECG electrode cream is presented and the pertinent literature is reviewed. Our patient was found to be allergic to propylene glycol. Patch-testing remains an invaluable tool in the evaluation of patients suspected of being allergic to ECG paste, creams, and gels.

  11. Allergic Contact Dermatitis to Eye Drops

    PubMed Central

    Bhat, Yasmeen Jabeen; Zeerak, Sumaya; Hassan, Iffat

    2015-01-01

    Allergic contact dermatitis (ACD) occurs due to a milieu of allergens and involves different anatomical sites, including eyelids, and periorbital areas. Topically applied ophthalmic drugs are a potential cause of ACD of the periorbital region. Here we describe the report of a patient who developed ACD to eye drop preparations. PMID:26677304

  12. Adhesive contact of randomly rough surfaces

    NASA Astrophysics Data System (ADS)

    Pastewka, Lars; Robbins, Mark

    2012-02-01

    The contact area, stiffness and adhesion between rigid, randomly rough surfaces and elastic substrates is studied using molecular statics and continuum simulations. The surfaces are self-affine with Hurst exponent 0.3 to 0.8 and different short λs and long λL wavelength cutoffs. The rms surface slope and the range and strength of the adhesive potential are also varied. For parameters typical of most solids, the effect of adhesion decreases as the ratio λL/λs increases. In particular, the pull-off force decreases to zero and the area of contact Ac becomes linear in the applied load L. A simple scaling argument is developed that describes the increase in the ratio Ac/L with increasing adhesion and a corresponding increase in the contact stiffness [1]. The argument also predicts a crossover to finite contact area at zero load when surfaces are exceptionally smooth or the ratio of surface tension to bulk modulus is unusually large, as for elastomers. Results that test this prediction will be presented and related to the Maugis-Dugdale [2] theories for individual asperities and the more recent scaling theory of Persson [3]. [1] Akarapu, Sharp, Robbins, Phys. Rev. Lett. 106, 204301 (2011) [2] Maugis, J. Colloid Interface Sci. 150, 243 (1992) [3] Persson, Phys. Rev. Lett. 74, 75420 (2006)

  13. [Contact allergy to dexpanthenol (author's transl)].

    PubMed

    Ippen, H

    1981-01-01

    During the testing for skin irritation of a sun protective and baby care lotion in epicutaneous tests over 24 hours, an eczematous test reaction appeared on a 30 year old physiotherapist. Testing of the single ingredients of both lotions showed the presence of contact allergy to Dexpanthenol.

  14. Thin Silicon MEMS Contact-Stress Sensor

    SciTech Connect

    Kotovsky, J; Tooker, A; Horsley, D A

    2009-12-07

    This work offers the first, thin, MEMS contact-stress (CS) sensor capable of accurate in situ measruement of time-varying, contact-stress between two solid interfaces (e.g. in vivo cartilage contact-stress and body armor dynamic loading). This CS sensor is a silicon-based device with a load sensitive diaphragm. The diaphragm is doped to create piezoresistors arranged in a full Wheatstone bridge. The sensor is similar in performance to established silicon pressure sensors, but it is reliably produced to a thickness of 65 {micro}m. Unlike commercial devices or other research efforts, this CS sensor, including packaging, is extremely thin (< 150 {micro}m fully packaged) so that it can be unobtrusively placed between contacting structures. It is built from elastic, well-characterized materials, providing accurate and high-speed (50+ kHz) measurements over a potential embedded lifetime of decades. This work explored sensor designs for an interface load range of 0-2 MPa; however, the CS sensor has a flexible design architecture to measure a wide variety of interface load ranges.

  15. Racial Prejudice, Interracial Contact, and Personality Variables.

    ERIC Educational Resources Information Center

    Moore, J. William; And Others

    1984-01-01

    This study examined the relationship of childrens' racial prejudice to child's race, interracial contact, grade, sex, intelligence, locus of control, anxiety, and self-concept. Five facets of racial prejudice were examined: a total index of racial prejudice, dating and marriage, school, social relationships, and racial interactions in restaurants.…

  16. Factors influencing bacterial adhesion to contact lenses

    PubMed Central

    Dutta, Debarun; Willcox, Mark

    2012-01-01

    The process of any contact lens related keratitis generally starts with the adhesion of opportunistic pathogens to contact lens surface. This article focuses on identifying the factors which have been reported to affect bacterial adhesion to contact lenses. Adhesion to lenses differs between various genera/species/strains of bacteria. Pseudomonas aeruginosa, which is the predominant causative organism, adheres in the highest numbers to both hydrogel and silicone hydrogel lenses in vitro. The adhesion of this strain reaches maximum numbers within 1h in most in vitro studies and a biofilm has generally formed within 24 h of cells adhering to the lens surface. Physical and chemical properties of contact lens material affect bacterial adhesion. The water content of hydroxyethylmethacrylate (HEMA)-based lenses and their iconicity affect the ability of bacteria to adhere. The higher hydrophobicity of silicone hydrogel lenses compared to HEMA-based lenses has been implicated in the higher numbers of bacteria that can adhere to their surfaces. Lens wear has different effects on bacterial adhesion, partly due to differences between wearers, responses of bacterial strains and the ability of certain tear film proteins when bound to a lens surface to kill certain types of bacteria. PMID:22259220

  17. 7 CFR 1710.400 - Initial contact.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AGRICULTURE GENERAL AND PRE-LOAN POLICIES AND PROCEDURES COMMON TO ELECTRIC LOANS AND GUARANTEES Application... Department of Agriculture, Washington, DC 20250-1500. A field or headquarters staff representative may be... outstanding loans should contact their assigned RUS general field representative (GFR) or, in the case of...

  18. 7 CFR 1710.400 - Initial contact.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AGRICULTURE GENERAL AND PRE-LOAN POLICIES AND PROCEDURES COMMON TO ELECTRIC LOANS AND GUARANTEES Application... Department of Agriculture, Washington, DC 20250-1500. A field or headquarters staff representative may be... outstanding loans should contact their assigned RUS general field representative (GFR) or, in the case of...

  19. 7 CFR 1710.400 - Initial contact.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 11 2014-01-01 2014-01-01 false Initial contact. 1710.400 Section 1710.400 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE GENERAL AND PRE-LOAN POLICIES AND PROCEDURES COMMON TO ELECTRIC LOANS AND GUARANTEES Application Requirements and Procedures for Loans...

  20. 7 CFR 1710.400 - Initial contact.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AGRICULTURE GENERAL AND PRE-LOAN POLICIES AND PROCEDURES COMMON TO ELECTRIC LOANS AND GUARANTEES Application... Department of Agriculture, Washington, DC 20250-1500. A field or headquarters staff representative may be... outstanding loans should contact their assigned RUS general field representative (GFR) or, in the case of...

  1. Indigenous Youth Migration and Language Contact

    ERIC Educational Resources Information Center

    Wyman, Leisy T.

    2013-01-01

    Few studies ethnographically detail how Indigenous young people's mobility intersects with sociolinguistic transformation in an interconnected world. Drawing on a decade-long study of youth and language contact, I analyze Yup'ik young people's migration in relation to emerging language ideologies and patterns of language use in "Piniq,"…

  2. Endolaryngeal contact laser surgery and voice function

    NASA Astrophysics Data System (ADS)

    Plouzhnikov, Marius S.; Lopotko, Anatoly I.

    1997-05-01

    The paper deals with the analysis of the voice function in patients with laryngeal pathology who had undergone Nd:YAG contact laser surgery. Surgery technique is believed to be gentle and sparing not only structurally but also functionally. It was shown that the methods of function evaluation of phonation such as the voice dynamic range, the main tone testing, transient characteristics of speech tracing, spectrography and electroreolaryngography can serve as a helpful tool in diagnostics and treatment follow-up. Benign laryngeal growths, cysts, scarring, hypertrophic laryngitis and cancer tumors comprise an essential group leading to phonation disturbances. In recent years essentially new surgical approaches have been initiated in the management of these pathologies. It is assumed that voice function quality is dependent not only on the nature, extent and site of the pathology but, also on the technique of the surgery employed and, consequently, on the degree of operative trauma. Contact laser excisions are, among modern sparing methods of laryngeal surgery. It has been shown that contact laser methods are more advantageous as compared to conventional surgery. The present investigation is aimed at exploring phonation in patients with various laryngeal pathology after Nd:YAG contact laser surgery.

  3. Contact Zones: Composition's Content in the University.

    ERIC Educational Resources Information Center

    Gottschalk, Katherine K.

    Contact zone theory--spaces where cultures meet, clash, and grapple with each other--helps writing program administrators to situate themselves. Writing programs and composition courses seem most troubled where the viewpoint of the most powerful faction is assumed as "the" viewpoint. One way to defuse tension is to recognize that writing is not…

  4. 2 CFR 225.55 - Information contact.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... information concerning this part may be obtained by contacting the Office of Federal Financial Management, Financial Standards and Reporting Branch, Office of Management and Budget, Washington, DC 20503, telephone... Grants and Agreements OFFICE OF MANAGEMENT AND BUDGET CIRCULARS AND GUIDANCE Reserved COST PRINCIPLES...

  5. Satisfaction with Social Contacts of Older Europeans

    ERIC Educational Resources Information Center

    Bonsang, Eric; van Soest, Arthur

    2012-01-01

    This paper analyses the determinants of an important component of well-being among individuals aged 50 years or older in eleven European countries: satisfaction with social contacts. We use data from the Survey of Health, Ageing and Retirement in Europe and anchoring vignettes to correct for potential differences in responses scales across…

  6. DNA transfer through nonintimate social contact.

    PubMed

    Jones, S; Scott, K; Lewis, J; Davidson, G; Allard, J E; Lowrie, C; McBride, B M; McKenna, L; Teppett, G; Rogers, C; Clayson, N; Baird, A

    2016-03-01

    The UK and Ireland Association of Forensic Science Providers' (AFSP) Body Fluid Forum (BFF) set out to assist in the interpretation of sexual offence cases where semen is absent on vaginal swabs but female DNA is present on penile swabs or male underwear, and the issue to be addressed is whether or not sexual intercourse occurred. This study aims to investigate the frequency and amount of female DNA transferred to the penis and underwear of males following staged nonintimate social contact with females and to compare the findings with the amount of female DNA transferred to the penis and subsequently to the underwear of a male who had engaged in unprotected sexual intercourse with a female. In this study, no matching female DNA was detected on the inside front of the 44 items of male underwear used in this research following staged contact of a nonintimate nature and subsequent secondary transfer to the penis. After sexual intercourse, full profiles matching the female participant were found on the inside front of the males underwear with maximum peak heights in the range between 1898 and 3157 rfu. It was possible to demonstrate that DNA can occasionally transfer to the waistband and outside front of underwear worn by a male following staged nonintimate social contact. Data obtained in this study suggest that a matching female DNA profile below a peak height of 1000 rfu on the waistband of a male's underwear might be explained by nonintimate social contact with secondary transfer of female DNA from the male's hands.

  7. Predictive models for moving contact line flows

    NASA Technical Reports Server (NTRS)

    Rame, Enrique; Garoff, Stephen

    2003-01-01

    Modeling flows with moving contact lines poses the formidable challenge that the usual assumptions of Newtonian fluid and no-slip condition give rise to a well-known singularity. This singularity prevents one from satisfying the contact angle condition to compute the shape of the fluid-fluid interface, a crucial calculation without which design parameters such as the pressure drop needed to move an immiscible 2-fluid system through a solid matrix cannot be evaluated. Some progress has been made for low Capillary number spreading flows. Combining experimental measurements of fluid-fluid interfaces very near the moving contact line with an analytical expression for the interface shape, we can determine a parameter that forms a boundary condition for the macroscopic interface shape when Ca much les than l. This parameter, which plays the role of an "apparent" or macroscopic dynamic contact angle, is shown by the theory to depend on the system geometry through the macroscopic length scale. This theoretically established dependence on geometry allows this parameter to be "transferable" from the geometry of the measurement to any other geometry involving the same material system. Unfortunately this prediction of the theory cannot be tested on Earth.

  8. Teaching Young Children to Use Contact Lenses.

    ERIC Educational Resources Information Center

    Mathews, Judith R.; And Others

    1992-01-01

    Four young children were taught contact lens wear using a shaping procedure, which involved praise and tangibles for compliance and time-outs or restraint for noncompliance. At followup, levels of compliance were high for three children, while a subject with Down's syndrome showed low compliance with need for physical restraint throughout.…

  9. Random Telegraph Switching in Quantum Point Contacts

    NASA Astrophysics Data System (ADS)

    Smith, J. C.; Wybourne, M. N.; Goodnick, S. M.

    1996-03-01

    We have investigated non equilibrium transport through quantum point contacts. At low source- drain bias the devices display well defined quantized conductance plateaus. At higher biases (> 6 mV) regions of instability in the differential conductance are observed. These regions are associated with the onset of conduction when the chemical potential on one side of the contact is lifted above the bottom of the next one-dimensional subband. Time dependent measurements of these regions reveal random telegraph switching (RTS) in the conductance.^1 The RTS has been studied as a function of source-drain bias, gate bias, and temperature. We believe the conductance switching is due to random fluctuations in the height of the barrier forming the point contact. We will discuss possible mechanisms for the barrier height fluctuations. ^1J.C. Smith, C. Berven, M.N. Wybourne and S.M. Goodnick. ``Conductance Instabilities in Quantum Point Contact'' In press, Surface Science. This work was supported in part by the Office of Naval Research N00014-93-1-0618.

  10. Access, Prestige and Losses in Contact Languages

    ERIC Educational Resources Information Center

    Parkvall, Mikael

    2013-01-01

    I am generally positive about Muysken's (M) approach, and the potential use of unifying various seemingly related phenomena is obvious. The approach could also serve as a tool in determining to what extent these phenomena actually are sides of the same coin (I am somewhat less convinced of this than most contact linguists).

  11. Statistical analysis of Contact Angle Hysteresis

    NASA Astrophysics Data System (ADS)

    Janardan, Nachiketa; Panchagnula, Mahesh

    2015-11-01

    We present the results of a new statistical approach to determining Contact Angle Hysteresis (CAH) by studying the nature of the triple line. A statistical distribution of local contact angles on a random three-dimensional drop is used as the basis for this approach. Drops with randomly shaped triple lines but of fixed volumes were deposited on a substrate and their triple line shapes were extracted by imaging. Using a solution developed by Prabhala et al. (Langmuir, 2010), the complete three dimensional shape of the sessile drop was generated. A distribution of the local contact angles for several such drops but of the same liquid-substrate pairs is generated. This distribution is a result of several microscopic advancing and receding processes along the triple line. This distribution is used to yield an approximation of the CAH associated with the substrate. This is then compared with measurements of CAH by means of a liquid infusion-withdrawal experiment. Static measurements are shown to be sufficient to measure quasistatic contact angle hysteresis of a substrate. The approach also points towards the relationship between microscopic triple line contortions and CAH.

  12. Feasibility of contact surveys in general practice.

    PubMed Central

    Phillips, A; Mant, D

    1987-01-01

    Surveys to evaluate risk factors for disease in the general population are popular with health authorities for assessing the effectiveness of their preventive measures. A contact survey of the lifestyles of 2000 randomly selected patients aged 25-64 was conducted in five general practices over 18 months; the medical records of the patients selected were tagged, and when the patients first visited the surgery they were given a questionnaire by the receptionists, which they completed in the waiting room. Over the 18 months at least 1400 of these patients visited the practices, of whom 1106 (55%) completed a questionnaire and 20 refused to do so; 896 (81%) completed it within one year. Information on the patients who were not surveyed was obtained by sending the questionnaire by post and by audit of medical records. The population surveyed on contact with the surgeries contained a higher proportion of young women, and possibly a higher proportion of patients from social classes IIIM-V, than the other patients. No important or consistent bias towards unhealthy patients at high risk was identified in the contact survey. A one year contact survey of a random, tagged sample is feasible in estimating the risk factors in a population and may be the method of choice in general practice because of its low cost and adaptability. PMID:3120900

  13. 7 CFR 1710.400 - Initial contact.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGRICULTURE GENERAL AND PRE-LOAN POLICIES AND PROCEDURES COMMON TO ELECTRIC LOANS AND GUARANTEES Application... Department of Agriculture, Washington, DC 20250-1500. A field or headquarters staff representative may be... outstanding loans should contact their assigned RUS general field representative (GFR) or, in the case of...

  14. Contact with Journalism and Its Image.

    ERIC Educational Resources Information Center

    Sobiecki, Zbigniew; Kent, K. E. M.

    In a study of the differences in images of journalism among persons with varying amounts of contact with the profession, three groups completed questionnaires. The groups were composed of 79 high school students, 55 college students majoring in journalism, and 54 professional journalists. The questionnaire included four items to measure perceived…

  15. Cross-Cultural Contact in Counseling Training.

    ERIC Educational Resources Information Center

    Diaz-Lazaro, Carlos M.; Cohen, B. Beth

    2001-01-01

    Reports on the importance of cross-cultural contact in the development of multicultural counseling competencies (MCCs). Results reveal that the greater the prior cross-cultural life experience, the higher were students' MCCs measured at the beginning of a multicultural counseling course. MCCs measured at the end of the course were significantly…

  16. English in Albania: Contact and Convergence.

    ERIC Educational Resources Information Center

    Dushku, Silvana

    1998-01-01

    Gives an overview of the current status and usage of English in Albania, outlining the sociolinguistic context in which changes in usage have taken place. Evidence is presented of increasing contact areas of English and standard Albanian under the new, post-communist sociopolitical and economic circumstances. Attention is drawn to need for more…

  17. Dry Eye in Pediatric Contact Lens Wearers

    PubMed Central

    Greiner, Katie L.; Walline, Jeffrey J.

    2015-01-01

    Objectives To determine whether children who wear contact lenses truly have fewer dry eye complaints than adults. Methods Ninety-four pediatric contact lens wearers, ages 8 to 14 years, were recruited and given the Contact Lens Dry Eye Questionnaire (CLDEQ) short form. The survey is designed to diagnose dry eye syndrome by obtaining information on the frequency of dryness and light sensitivity and their corresponding intensity levels within the first two hours of putting in the lenses, in the middle of the day, and at the end of the day. The responses were scored by multiplying the frequency by the average intensity and a constant. A composite score was calculated by subtracting the photophobia score from the dryness score, and the results were compared to adult samples from the literature. The questionnaire also asked whether the subject thought he/she had dry eyes while wearing contact lenses. Subjects that thought they had dry eyes and had a CLDEQ composite score >0.03 were diagnosed with dry eye. Subjects who were unsure if they dry eye or said they did not have dry eye but scored >1.29 were also diagnosed with dry eye. Results The average (± SD) age of the sample was 11.7 ± 1.5 years, 56.4% were female, 59.6% were white, and 19.1% were black. The mean (± SD) CLDEQ composite score was 0.25 ±0.50 (range= -1.20 to 1.45). In the literature, the adult mean (± SD) CLDEQ composite score was 1.02 ±0.80 (range= -0.74 to 4.50). Of the 94 surveys collected, 4.3% of children were categorized with dry eye compared to 56.2% of adults who completed the CLDEQ survey in the adult study. Conclusions Pediatric contact lens wearers have fewer complaints about dry eyes than adult contact lens wearers, which may be due to improved tear film, differences in reporting of symptoms, or modality of contact lens wear. PMID:21060258

  18. Metal-semiconductor contacts: electronic properties

    NASA Astrophysics Data System (ADS)

    Mönch, Winfried

    1994-01-01

    Rectification in metal-semiconductor contacts was first described by Braun in 1874. We owe the explanation of this observation to Schottky. He demonstrated that depletion layers exist on the semiconductor side of such interfaces. The current transport across such contacts is determined by their barrier heights, i.e., the respective energy difference between the Fermi level and the edge of the majority-carrier band. Since Schottky had published his pioneering work in 1938 the mechanisms, which determine the barrier heights of metal-semiconductor contacts, have remained under discussion. In 1947, Bardeen attributed the failure of the early Schottky-Mott rule to the neglect of electronic interface states. The foundations for a microscopic description of interface states in ideal Schottky contacts was laid by Heine in 1965. He demonstrated that a continuum of metal-induced gap states (MIGS), as they were called later, derives from the virtual gap states of the complex semiconductor band-structure. Neither this MIGS model nor any of the many other monocausal approaches, the most prominent is Spicer's Unified Defect Model, can explain the experimental data. In 1987, Mönch concluded that the continuum of MIG states represents the primary mechanism, which determines the barrier heights in ideal, i.e., intimate, abrupt, and homogeneous metal-semiconductor contacts. He attributed deviations from what is predicted by the MIGS model to other and then secondary mechanisms. In this respect, interface defects, structure-related interface dipoles. interface strain, interface compound formation, and interface intermixing, to name a few examples, were considered.

  19. Spreading of wheat germ agglutinin-induced erythrocyte contact by formation of spatially discrete contacts.

    PubMed

    Darmani, H; Coakley, W T; Hann, A C; Brain, A

    1990-06-01

    The time dependence of agglutination and cell-cell contact spreading in human erythrocytes exposed to wheat germ agglutinin (WGA) was characterized by light and electron microscopy. Cells (3 x 10(7)/mL) had a threshold lectin concentration in the range of 0.6-2.0 micrograms/mL for initial cell contact. Spreading was essentially completed within 60 and 2 min in undisturbed and gently agitated suspensions, respectively. The cells in large WGA agglutinates retained features of their initial disk form in contrast to the convex outlines of polycation or polyethylene glycol-induced agglutinates. Spreading of contact area was accompanied by development of a pattern of discrete contact regions separated by a distance of the order of 1 micron. Freeze fracture electron microscopy and studies with ferritin-labeled WGA showed no significant aggregation of intramembrane particles or specific lectin receptors under conditions when contact spreading occurred. It is argued that flow stress effects on cells in suspended agglutinates give rise to a situation where opposite membranes, at the leading edge of cell contact, are separated by a thin aqueous layer. When this intercellular water layer exceeds a critical length, it becomes unstable. The layer breaks up by surface wave development to form an array of intracellular water spaces. Formation of the aqueous spaces causes opposite membrane regions to move synchronously toward each other. Lectin molecules crosslink the wave crests to give spatially periodic contact points.

  20. Flexible, Carbon-Based Ohmic Contacts for Organic Transistors

    NASA Technical Reports Server (NTRS)

    Brandon, Erik

    2005-01-01

    A low-temperature process for fabricating flexible, ohmic contacts for use in organic thin-film transistors (OTFTs) has been developed. Typical drainsource contact materials used previously for OTFTs include (1) vacuum-deposited noble-metal contacts and (2) solution-deposited intrinsically conducting molecular or polymeric contacts. Both of these approaches, however, have serious drawbacks.

  1. Diabetic Neuropathy: What is a Total Contact Cast?

    MedlinePlus

    ... Web version Diabetic Neuropathy | What is a Total Contact Cast? What is a total contact cast? A total contact cast is a cast used to treat ulcers ( ... foot--that's why it is called a total contact cast. The cast helps to protect the skin ...

  2. 16 CFR 315.6 - Expiration of contact lens prescriptions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Expiration of contact lens prescriptions. 315.6 Section 315.6 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS CONTACT LENS RULE § 315.6 Expiration of contact lens prescriptions. (a) In general. A contact...

  3. 16 CFR 315.6 - Expiration of contact lens prescriptions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Expiration of contact lens prescriptions. 315.6 Section 315.6 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS CONTACT LENS RULE § 315.6 Expiration of contact lens prescriptions. (a) In general. A contact...

  4. 16 CFR 315.6 - Expiration of contact lens prescriptions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Commission, its employees, and its representatives. (3) No prescriber shall include an expiration date on a... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Expiration of contact lens prescriptions... CONGRESS CONTACT LENS RULE § 315.6 Expiration of contact lens prescriptions. (a) In general. A contact...

  5. 16 CFR 315.6 - Expiration of contact lens prescriptions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Commission, its employees, and its representatives. (3) No prescriber shall include an expiration date on a... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Expiration of contact lens prescriptions... CONGRESS CONTACT LENS RULE § 315.6 Expiration of contact lens prescriptions. (a) In general. A contact...

  6. 16 CFR 315.6 - Expiration of contact lens prescriptions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Commission, its employees, and its representatives. (3) No prescriber shall include an expiration date on a... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Expiration of contact lens prescriptions... CONGRESS CONTACT LENS RULE § 315.6 Expiration of contact lens prescriptions. (a) In general. A contact...

  7. Effect of time derivative of contact area on dynamic friction

    NASA Astrophysics Data System (ADS)

    Arakawa, Kazuo

    2014-06-01

    This study investigated dynamic friction during oblique impact of a golf ball by evaluating the ball's angular velocity, contact force, and the contact area between the ball and target. The effect of the contact area on the angular velocities was evaluated, and the results indicated that the contact area plays an important role in dynamic friction. In this study, the dynamic friction force F was given by F = μN + μη dA/dt, where μ is the coefficient of friction, N is the contact force, dA/dt is the time derivative of the contact area A, and η is a coefficient associated with the contact area.

  8. What does annealing do to metal-graphene contacts?

    PubMed

    Leong, Wei Sun; Nai, Chang Tai; Thong, John T L

    2014-07-01

    Annealing is a postprocessing treatment commonly used to improve metal-graphene contacts with the assumption that resist residues sandwiched at the metal-graphene contacts are removed during annealing. Here, we examine this assumption by undertaking a systematic study to understand mechanisms that lead to the contact enhancement brought about by annealing. Using a soft shadow-mask, we fabricated residue-free metal-graphene contacts with the same dimensions as lithographically defined metal-graphene contacts on the same graphene flake. Both cases show comparable contact enhancement for nickel-graphene contacts after annealing treatment signifying that removal of resist residues is not the main factor for contact enhancement. It is found instead that carbon dissolves from graphene into the metal at chemisorbed Ni- and Co-graphene interfaces and leads to many end-contacts being formed between the metal and the dangling carbon bonds in the graphene, which contributes to much smaller contact resistance.

  9. Surrogate Modeling of Deformable Joint Contact using Artificial Neural Networks

    PubMed Central

    Eskinazi, Ilan; Fregly, Benjamin J.

    2016-01-01

    Deformable joint contact models can be used to estimate loading conditions for cartilage-cartilage, implant-implant, human-orthotic, and foot-ground interactions. However, contact evaluations are often so expensive computationally that they can be prohibitive for simulations or optimizations requiring thousands or even millions of contact evaluations. To overcome this limitation, we developed a novel surrogate contact modeling method based on artificial neural networks (ANNs). The method uses special sampling techniques to gather input-output data points from an original (slow) contact model in multiple domains of input space, where each domain represents a different physical situation likely to be encountered. For each contact force and torque output by the original contact model, a multi-layer feed-forward ANN is defined, trained, and incorporated into a surrogate contact model. As an evaluation problem, we created an ANN-based surrogate contact model of an artificial tibiofemoral joint using over 75,000 evaluations of a fine-grid elastic foundation (EF) contact model. The surrogate contact model computed contact forces and torques about 1000 times faster than a less accurate coarse grid EF contact model. Furthermore, the surrogate contact model was seven times more accurate than the coarse grid EF contact model within the input domain of a walking motion. For larger input domains, the surrogate contact model showed the expected trend of increasing error with increasing domain size. In addition, the surrogate contact model was able to identify out-of-contact situations with high accuracy. Computational contact models created using our proposed ANN approach may remove an important computational bottleneck from musculoskeletal simulations or optimizations incorporating deformable joint contact models. PMID:26220591

  10. Contact Lens Wearer Demographics and Risk Behaviors for Contact Lens-Related Eye Infections--United States, 2014.

    PubMed

    Cope, Jennifer R; Collier, Sarah A; Rao, Maya M; Chalmers, Robin; Mitchell, G Lynn; Richdale, Kathryn; Wagner, Heidi; Kinoshita, Beth T; Lam, Dawn Y; Sorbara, Luigina; Zimmerman, Aaron; Yoder, Jonathan S; Beach, Michael J

    2015-08-21

    Contact lenses provide safe and effective vision correction for many Americans. However, contact lens wearers risk infection if they fail to wear, clean, disinfect, and store their contact lenses as directed. Over the past decade, CDC has investigated several multistate outbreaks of serious eye infections among contact lens wearers, including Acanthamoeba keratitis. Each investigation identified frequent contact lens hygiene-related risk behaviors among patients. To guide prevention efforts, a population-based survey was used to estimate the number of contact lens wearers aged ≥18 years in the United States. A separate online survey of contact lens wearers assessed the prevalence of contact lens hygiene-related risk behaviors. Approximately 99% of wearers reported at least one contact lens hygiene risk behavior. Nearly one third of contact lens wearers reported having experienced a previous contact lens-related red or painful eye requiring a doctor's visit. An estimated 40.9 million U.S. adults wear contact lenses, and many could be at risk for serious eye infections because of poor contact lens wear and care behaviors. These findings have informed the creation of targeted prevention messages aimed at contact lens wearers such as keeping all water away from contact lenses, discarding used disinfecting solution from the case and cleaning with fresh solution each day, and replacing their contact lens case every 3 months.

  11. Contact and non-contact ultrasonic measurement in the food industry: a review

    NASA Astrophysics Data System (ADS)

    Taufiq Mohd Khairi, Mohd; Ibrahim, Sallehuddin; Yunus, Mohd Amri Md; Faramarzi, Mahdi

    2016-01-01

    The monitoring of the food manufacturing process is vital since it determines the safety and quality level of foods which directly affect the consumers’ health. Companies which produce high quality products will gain trust from consumers. This factor helps the companies to make profits. The use of efficient and appropriate sensors for the monitoring process can also reduce cost. The food assessing process based on an ultrasonic sensor has attracted the attention of the food industry due to its excellent capabilities in several applications. The utilization of low or high frequencies for the ultrasonic transducer has provided an enormous benefit for analysing, modifying and guaranteeing the quality of food. The contact and non-contact ultrasonic modes for measurement also contributed significantly to the food processing. This paper presents a review of the application of the contact and non-contact mode of ultrasonic measurement focusing on safety and quality control areas. The results from previous researches are shown and elaborated.

  12. Evaporation-induced flow near a contact line: Consequences on coating and contact angle

    NASA Astrophysics Data System (ADS)

    Berteloot, G.; Pham, C.-T.; Daerr, A.; Lequeux, F.; Limat, L.

    2008-07-01

    We propose a simple model of the dynamics of a contact line under evaporation and partial wetting conditions, taking into account the divergent nature of evaporation near the contact line, as evidenced by Deegan et al. (Nature, 389 (1997) 827). We show that evaporation can induce a non-negligible change of the contact angle together with modification of the flow near the contact line. We apply our results to dip-coating of a substrate with non volatile solutes. We show that at small velocities the coating thickness increases and scales like the inverse of the square of the velocity which implies a minimum of the coating thickness at the cross-over with the more familiar Landau-Levich regime.

  13. Large deformation contact mechanics of a pressurized long rectangular membrane. II. Adhesive contact

    PubMed Central

    Srivastava, Abhishek; Hui, Chung-Yuen

    2013-01-01

    In part I of this work, we presented a theory for adhesionless contact of a pressurized neo-Hookean plane-strain membrane to a rigid substrate. Here, we extend our theory to include adhesion using a fracture mechanics approach. This theory is used to study contact hysteresis commonly observed in experiments. Detailed analysis is carried out to highlight the differences between frictionless and no-slip contact. Membrane detachment is found to be strongly dependent on adhesion: for low adhesion, the membrane ‘pinches-off’, whereas for large adhesions, it detaches unstably at finite contact (‘pull-off’). Expressions are derived for the critical adhesion needed for pinch-off to pull-off transition. Above a threshold adhesion, the membrane exhibits bistability, two stable states at zero applied pressure. The condition for bistability for both frictionless and no-slip boundary conditions is obtained explicitly. PMID:24353472

  14. Theoretical results for starved elliptical contacts

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.; Dowson, D.

    1983-01-01

    Eighteen cases were used in the theoretical study of the influence of lubricant starvation on film thickness and pressure in elliptical elastohydrodynamic conjunctions. From the results a simple and important critical dimensionless inlet boundary distance at which lubricant starvation becomes significant was specified. This inlet boundary distance defines whether a fully flooded or a starved condition exists in the contact. Furthermore, it was found that the film thickness for a starved condition is written in dimensionless terms as a function of the inlet distance parameter and the film thickness for a fully flooded condition. Contour plots of pressure and film thickness in and around the contact are shown for fully flooded and starved conditions.

  15. Pair contact process with diffusion of pairs

    NASA Astrophysics Data System (ADS)

    Santos, F. L.; Dickman, Ronald; Fulco, U. L.

    2011-03-01

    The pair contact process (PCP) is a nonequilibrium stochastic model which, like the basic contact process (CP), exhibits a phase transition to an absorbing state. The two models belong to the directed percolation (DP) universality class, despite the fact that the PCP possesses infinitely many absorbing configurations whereas the CP has but one. The critical behavior of the PCP with hopping by particles (PCPD) is as yet unclear. Here we study a version of the PCP in which nearest-neighbor particle pairs can hop but individual particles cannot. Using quasistationary simulations for three values of the diffusion probability (D = 0.1, 0.5 and 0.9), we find convincing evidence of DP-like critical behavior.

  16. Interactive contacts resolution using smooth surface representation.

    PubMed

    Dequidt, Jérémie; Lenoir, Julien; Cotin, Stéphane

    2007-01-01

    Accurately describing interactions between medical devices and anatomical structures, or between anatomical structures themselves, is an essential step towards the adoption of computer-based medical simulation as an alternative to traditional training methods. However, while substantial work has been done in the area of real-time soft tissue modeling, little has been done to study the problem of contacts occurring during tissue manipulation. In this paper we introduce a new method for correctly handling complex contacts between various combination of rigid and deformable objects. Our approach verifies Signorini's law by combining Lagrange multipliers and the status method to solve unilateral constraints. Our method handles both concave and convex surfaces by using a displacement subdivision strategy, and the proposed algorithm allows interactive computation times even in very constrained situations. We demonstrate the efficiency of our approach in the context of interventional radiology, with the navigation of catheters and guidewires in tortuous vessels and with the deployment of coils to treat aneurysms.

  17. Contact Whiskers for Millimeter Wave Diodes

    NASA Technical Reports Server (NTRS)

    Kerr, A. R.; Grange, J. A.; Lichtenberger, J. A.

    1978-01-01

    Several techniques are investigated for making short conical tips on wires (whiskers) used for contacting millimeter-wave Schottky diodes. One procedure, using a phosphoric and chromic acid etching solution (PCE), is found to give good results on 12 microns phosphor-bronze wires. Full cone angles of 60 degrees-80 degrees are consistently obtained, compared with the 15 degrees-20 degrees angles obtained with the widely used sodium hydroxide etch. Methods are also described for cleaning, increasing the tip diameter (i.e. blunting), gold plating, and testing the contact resistance of the whiskers. The effects of the whisker tip shape on the electrical resistance, inductance, and capacitance of the whiskers are studied, and examples given for typical sets of parameters.

  18. Multiscale modeling of two-dimensional contacts.

    PubMed

    Luan, B Q; Hyun, S; Molinari, J F; Bernstein, N; Robbins, Mark O

    2006-10-01

    A hybrid simulation method is introduced and used to study two-dimensional single-asperity and multi-asperity contacts both quasistatically and dynamically. The method combines an atomistic treatment of the interfacial region with a finite-element method description of subsurface deformations. The dynamics in the two regions are coupled through displacement boundary conditions applied at the outer edges of an overlap region. The two solutions are followed concurrently but with different time resolution. The method is benchmarked against full atomistic simulations. Accurate results are obtained for contact areas, pressures, and static and dynamic friction forces. The time saving depends on the fraction of the system treated atomistically and is already more than a factor of 20 for the relatively small systems considered here.

  19. [Contact allergies to recently introduced preservatives].

    PubMed

    Senff, H; Köllner, A; Tholen, S; Frosch, P J

    1991-04-01

    Preservatives have come under fire due to their possible detrimental properties and the high rate of contact allergies some of them cause. Therefore, the pharmaceutical industry is searching for alternatives that will be effective, safe and economical. The present paper introduces a selection of new or revived biocides (Kathon CG, benzisothiazolinone, Euxyl K 400, Biobans, Grotans, Bronopol, Germall II), and the range of application and the sensitization potency of each are discussed. Test concentrations for patch tests are recommended. Kathon CG is the most commonly used preservative among these biocides, although it has a high sensitization potency and is a frequently encountered contact allergen. To make discovery of a new allergen easier and to reduce the risk of side effects, manufacturers should be required to specify the ingredients of their products on the labels.

  20. Taming contact line instability for pattern formation

    PubMed Central

    Deblais, A.; Harich, R.; Colin, A.; Kellay, H.

    2016-01-01

    Coating surfaces with different fluids is prone to instability producing inhomogeneous films and patterns. The contact line between the coating fluid and the surface to be coated is host to different instabilities, limiting the use of a variety of coating techniques. Here we take advantage of the instability of a receding contact line towards cusp and droplet formation to produce linear patterns of variable spacings. We stabilize the instability of the cusps towards droplet formation by using polymer solutions that inhibit this secondary instability and give rise to long slender cylindrical filaments. We vary the speed of deposition to change the spacing between these filaments. The combination of the two gives rise to linear patterns into which different colloidal particles can be embedded, long DNA molecules can be stretched and particles filtered by size. The technique is therefore suitable to prepare anisotropic structures with variable properties. PMID:27506626

  1. General Properties of Near-Contact Binaries

    NASA Astrophysics Data System (ADS)

    Oh, Kyu-Dong; Kim, Ho-Il; Kang, Young-Woon; Lee, Woo-Baik

    2000-12-01

    The general properties of the NCBs, divided into A and F types according to their spectral types, have been presented. The evolutionary status of the F type near-contact binaries are closer to that of the contact systems, i.e., W UMa type binaries, if it is assumed that the evolution of the NCBs is governed by the thermal relaxation oscillation theory. The mass-radius relation, mass-luminosity relation and H-R diagram of the NCBs provide that the A type NCBs suffer from more active mass transfer than F types. The components of the NCBs are still in main-sequence like W UMa type stars and their two components lines parallel to the ZAMS.

  2. [Allergic contact dermatitis in beauty parlor clients].

    PubMed

    Gottlöber, P; Gall, H; Bezold, G; Peter, R U

    2001-05-01

    Occupational contact dermatitis in hair dressers and beauticians has increased in importance in the past years. Type IV-allergies against glyceryl monothioglycate components of permanent waves are most common. Other occupational allergens include bleach components such as ammonium persulfate and hair dye ingredients such as p-phenylenediamine (PPD) and p-toluylene-diamine (PTD) base. Allergies to hair dyes in customers of hair dressers have rarely been observed. Two female patients developed allergic contact dermatitis of the scalp and face after repeated use of Polycolor intensivtönung schwarz and of Movida color. We also review the current literature on type IV-allergies to components of hair dressing products components.

  3. Allergic contact dermatitis from shellac in mascara.

    PubMed

    Le Coz, Christophe-J; Leclere, Jean-Marie; Arnoult, Elisabeth; Raison-Peyron, Nadia; Pons-Guiraud, Annick; Vigan, Martine

    2002-03-01

    We report 6 cases of allergic contact dermatitis of the eyelids due to mascara. Allergy occurred in women aged 17-34 years, between September 1999 and June 2001. The main ingredient responsible for allergy was shellac, which gave positive patch test reactions in 5/5 patients. This resinous substance is mainly used in cosmetics, food and industry. The exact nature of the hapten remains unknown, and its presence and level in shellac can vary with the source and the treatments applied to it. One patient was also sensitized to quaternium-22, a quaternary ammonium compound in the cosmetic. These reports underline the rôle of networks, such as REVIDAL-GERDA, in monitoring the emergence of contact allergens and disseminating such information among the medical community.

  4. Multiregion contact systems for modelling STD epidemics.

    PubMed

    Thomas, R; Smith, T E

    This paper elicits properties of some multiregional contact systems for STD infections that are intended to assist the understanding of disease control strategies. To this end, a space-time SIS model is described that maintains the symmetry of contact that is inherent in the formation of sexual partnerships. It is demonstrated how the characteristic stability conditions of this model provide a framework for understanding the potential for sustained transmission after the introduction of the agent into a given region. Then, more complex SI specifications are derived that are particularly relevant to the transmission of HIV. These extensions include the introduction of alternative modes of travel and behavioural adaptations made in response to the circulation of HIV and the incidence of AIDS. The discussion suggests some additions to the systems that might enhance their applicability in practice.

  5. Micro-ecological behavior and intergroup contact.

    PubMed

    McKeown, Shelley; Cairns, Ed; Stringer, Maurice; Rae, Gordon

    2012-01-01

    Research evaluating intergroup contact has tended to rely on self-report measures. Drawing on recent micro-ecological research, the two studies reported here used a multi-method approach to examine contact in a more holistic fashion. This involved the measurement of observable behavior at the micro-level, intergroup attitudes via infrahumanization and focus groups. Participants were taking part in a community intervention program in Northern Ireland. We conclude that micro-ecological behavior is not necessarily indicative of outgroup attitudes. Although behavior and attitudes changed in line with one another in Study 1 (less aggregation and significantly less infrahumanization), there were no infrahumanization differences between those who sat beside an outgroup member and those who did not. Importantly, the work presented here illustrates a unique method that allows micro-ecological behavioral observations to be made for the first time in non-racial settings. PMID:22558828

  6. Ultrananocrystalline diamond contacts for electronic devices

    DOEpatents

    Sumant, Anirudha V.; Smedley, John; Muller, Erik

    2016-11-01

    A method of forming electrical contacts on a diamond substrate comprises producing a plasma ball using a microwave plasma source in the presence of a mixture of gases. The mixture of gases include a source of a p-type or an n-type dopant. The plasma ball is disposed at a first distance from the diamond substrate. The diamond substrate is maintained at a first temperature. The plasma ball is maintained at the first distance from the diamond substrate for a first time, and a UNCD film, which is doped with at least one of a p-type dopant and an n-type dopant, is disposed on the diamond substrate. The doped UNCD film is patterned to define UNCD electrical contacts on the diamond substrate.

  7. Dynamic contact guidance of migrating cells

    NASA Astrophysics Data System (ADS)

    Losert, Wolfgang; Sun, Xiaoyu; Guven, Can; Driscoll, Meghan; Fourkas, John

    2014-03-01

    We investigate the effects of nanotopographical surfaces on the cell migration and cell shape dynamics of the amoeba Dictyostelium discoideum. Amoeboid motion exhibits significant contact guidance along surfaces with nanoscale ridges or grooves. We show quantitatively that nanoridges spaced 1.5 μm apart exhibit the greatest contact guidance efficiency. Using principal component analysis, we characterize the dynamics of the cell shape modulated by the coupling between the cell membrane and ridges. We show that motion parallel to the ridges is enhanced, while the turning, at the largest spatial scales, is suppressed. Since protrusion dynamics are principally governed by actin dynamics, we imaged the actin polymerization of cells on ridges. We found that actin polymerization occurs preferentially along nanoridges in a ``monorail'' like fashion. The ridges then provide us with a tool to study actin dynamics in an effectively reduced dimensional system.

  8. Allergic contact dermatitis to fragrances. Part 1.

    PubMed

    Arribas, M P; Soro, P; Silvestre, J F

    2012-12-01

    Fragrances are a large group of substances and the second most common cause of allergic contact dermatitis in Spain. These potential allergens are extremely common and the general population is subject to continuous exposure on a daily basis. While the fragrance markers included in the current Spanish standard patch test series are good, there is room for improvement. New markers that have emerged in recent years have proven to be of value in standard series used in other countries. Diagnosing fragrance allergy has taken on even greater importance since the European Union added 26 fragrances to its list of mandatory ingredients to be specified on product labels. The aim of this review is to provide an update on allergic contact dermatitis to fragrances. We examine the main sources of exposure and clinical manifestations of this condition and propose a diagnostic and treatment protocol.

  9. [Contact dermatitis caused by bergamot oil].

    PubMed

    Zacher, K D; Ippen, H

    1984-01-01

    This report is on two patients with contact allergy to bergamot oil, which owing to the volatility of its individual components could only be determined by patch tests after skin stripping. One is a case of occupational disease related to the patient's job in a perfume factory warehouse, and the other is obviously a case of sensitization due to cosmetics. In the former instance patch-test results were positive to alpha-pinene and beta-pinene, and in the latter to citral and alpha-pinene. As could be expected, contact allergy to turpentine oil was confirmed in the first case, whereas the actual eczematogenic in the second case, in which turpentine oil was negative, may have been citral.

  10. Similarity theory of lubricated Hertzian contacts

    NASA Astrophysics Data System (ADS)

    Snoeijer, J. H.; Eggers, J.; Venner, C. H.

    2013-10-01

    We consider a heavily loaded, lubricated contact between two elastic bodies at relative speed U, such that there is substantial elastic deformation. As a result of the interplay between hydrodynamics and non-local elasticity, a fluid film develops between the two solids, whose thickness scales as U3/5. The film profile h is selected by a universal similarity solution along the upstream inlet. Another similarity solution is valid at the outlet, which exhibits a local minimum in the film thickness. The two solutions are connected by a hyperbolic problem underneath the contact. Our asymptotic results for a soft sphere pressed against a hard wall are shown to agree with both experiment and numerical simulations.

  11. Contact formation in gallium arsenide solar cells

    NASA Technical Reports Server (NTRS)

    Weizer, Victor G.; Fatemi, Navid S.

    1988-01-01

    Gold and gold-based alloys, commonly used as solar cell contact materials, are known to react readily with gallium arsenide. Experiments were performed to identify the mechanisms involved in these GaAs-metal interactions. It is shown that the reaction of GaAs with gold takes place via a dissociative diffusion process. It is shown further that the GaAs-metal reaction rate is controlled to a very great extent by the condition of the free surface of the contact metal, an interesting example of which is the previously unexplained increase in the reaction rate that has been observed for samples annealed in a vacuum environment as compared to those annealed in a gaseous ambient. A number of other hard-to-explain observations, such as the low-temperature formation of voids in the gold lattice and crystallite growth on the gold surface, are explained by invoking this mechanism.

  12. Direct contact, binary fluid geothermal boiler

    DOEpatents

    Rapier, P.M.

    1979-12-27

    Energy is extracted from geothermal brines by direct contact with a working fluid such as isobutane which is immiscible with the brine in a geothermal boiler. The geothermal boiler provides a distributor arrangement which efficiently contacts geothermal brine with the isobutane in order to prevent the entrainment of geothermal brine in the isobutane vapor which is directed to a turbine. Accordingly the problem of brine carryover through the turbine causing corrosion and scaling thereof is eliminated. Additionally the heat exchanger includes straightening vanes for preventing startup and other temporary fluctuations in the transitional zone of the boiler from causing brine carryover into the turbine. Also a screen is provided in the heat exchanger to coalesce the working fluid and to assist in defining the location of the transitional zone where the geothermal brine and the isobutane are initially mixed.

  13. Direct contact, binary fluid geothermal boiler

    DOEpatents

    Rapier, Pascal M.

    1982-01-01

    Energy is extracted from geothermal brines by direct contact with a working fluid such as isobutane which is immiscible with the brine in a geothermal boiler. The geothermal boiler provides a distributor arrangement which efficiently contacts geothermal brine with the isobutane in order to prevent the entrainment of geothermal brine in the isobutane vapor which is directed to a turbine. Accordingly the problem of brine carry-over through the turbine causes corrosion and scaling thereof is eliminated. Additionally the heat exchanger includes straightening vanes for preventing startup and other temporary fluctuations in the transitional zone of the boiler from causing brine carryover into the turbine. Also a screen is provided in the heat exchanger to coalesce the working fluid and to assist in defining the location of the transitional zone where the geothermal brine and the isobutane are initially mixed.

  14. Cinnamon-induced Oral Mucosal Contact Reaction

    PubMed Central

    Vivas, Ana P. M; Migliari, Dante A

    2015-01-01

    Contact stomatitis associated with consumption of cinnamon flavoring agents is a relatively uncommon disorder. Of relevance, both clinical features and the histopathologic findings of this condition are nonspecific, and, more importantly, may resemble some other inflammatory oral mucosa disorders, eventually making diagnosis difficult. Usually a patient exhibits a combination of white and erythematous patches of abrupt onset, accompanied by a burning sensation. To shed some light on this subject, a case of a 64-year-old woman with hypersensitivity contact reaction on the oral mucosa due to cinnamon mints is presented, with emphasis on differential diagnosis and the process for confirmation of the diagnosis. The treatment consists of discontinuing the use of cinnamon products. Clinicians will be able to recognize this disorder following a careful clinical examination and detailed history. This recognition is important in order to avoid invasive and expensive diagnostic procedures. PMID:26312097

  15. Organelle remodeling at membrane contact sites.

    PubMed

    Henne, W Mike

    2016-10-01

    Cellular organelles must execute sophisticated biological processes to persist, and often communicate with one another to exchange metabolites and information. Recent studies suggest inter-organelle membrane contact sites (MCSs) are hubs for this cellular cross-talk. MCSs also govern membrane remodeling, thus controlling aspects of organelle shape, identity, and function. Here, we summarize three emerging phenomena that MCSs appear to govern: 1) organelle identity via the non-vesicular exchange of lipids, 2) mitochondrial shape and division, and 3) endosomal migration in response to sterol trafficking. We also discuss the role for ER-endolysosomal contact sites in cholesterol metabolism, and the potential biomedical importance this holds. Indeed, the emerging field inter-organellar cross-talk promises substantial advances in the fields of lipid metabolism and cell signaling.

  16. Contact lens-associated nocardial necrotizing scleritis.

    PubMed

    Rush, Ryan B

    2013-08-01

    A 52 year-old, contact lens-wearing man presented with progressive right eye pain and redness for one month. He had been evaluated and treated for necrotizing scleritis by multiple eye care specialists prior to presentation. He underwent a complete systemic work-up for both autoimmune and infectious causes of scleritis, including a culture. The culture revealed heavy growth of Nocardia asteroides complexes. The patient was treated with topical amikacin and oral Bactrim. Following several weeks of antibiotic treatment, the patient's infection resolved completely, and his visual acuity returned to baseline status. Nocardia is a rare but potentially devastating cause of necrotizing scleritis that may affect contact lens wearers without an associated keratitis. Prompt recognition and early treatment with appropriate antimicrobial agents are critical to achieve a favorable outcome. PMID:23908577

  17. Allergic contact dermatitis: Patient diagnosis and evaluation.

    PubMed

    Mowad, Christen M; Anderson, Bryan; Scheinman, Pamela; Pootongkam, Suwimon; Nedorost, Susan; Brod, Bruce

    2016-06-01

    Allergic contact dermatitis resulting from exposure to a chemical or chemicals is a common diagnosis in the dermatologist's office. We are exposed to hundreds of potential allergens daily. Patch testing is the criterion standard for diagnosing the causative allergens responsible for allergic contact dermatitis. Patch testing beyond standard trays is often needed to fully diagnose patients, but not all dermatology practices have access to this testing procedure or these allergens. In order to adequately evaluate patients, physicians must understand the pathophysiology of the disease process and be well versed in the proper evaluation of patients, indications for patch testing, proper testing procedure, and other diagnostic tools available and be aware of new and emerging allergens. PMID:27185421

  18. Graphdiyne-metal contacts and graphdiyne transistors

    NASA Astrophysics Data System (ADS)

    Pan, Yuanyuan; Wang, Yangyang; Wang, Lu; Zhong, Hongxia; Quhe, Ruge; Ni, Zeyuan; Ye, Meng; Mei, Wai-Ning; Shi, Junjie; Guo, Wanlin; Yang, Jinbo; Lu, Jing

    2015-01-01

    Graphdiyne was prepared on a metal surface, and the preparation of devices using it inevitably involves its contact with metals. Using density functional theory with dispersion correction, we systematically studied, for the first time, the interfacial properties of graphdiyne that is in contact with a series of metals (Al, Ag, Cu, Au, Ir, Pt, Ni, and Pd). Graphdiyne forms an n-type Ohmic or quasi-Ohmic contact with Al, Ag, and Cu, while it forms a Schottky contact with Pd, Au, Pt, Ni, and Ir (at the source/drain-channel interface), with high Schottky barrier heights of 0.21, 0.46 (n-type), 0.30, 0.41, and 0.46 (p-type) eV, respectively. A graphdiyne field effect transistor (FET) with Al electrodes was simulated using quantum transport calculations. This device exhibits an on-off ratio up to 104 and a very large on-state current of 1.3 × 104 mA mm-1 in a 10 nm channel length. Thus, a new prospect has opened up for graphdiyne in high performance nanoscale devices.Graphdiyne was prepared on a metal surface, and the preparation of devices using it inevitably involves its contact with metals. Using density functional theory with dispersion correction, we systematically studied, for the first time, the interfacial properties of graphdiyne that is in contact with a series of metals (Al, Ag, Cu, Au, Ir, Pt, Ni, and Pd). Graphdiyne forms an n-type Ohmic or quasi-Ohmic contact with Al, Ag, and Cu, while it forms a Schottky contact with Pd, Au, Pt, Ni, and Ir (at the source/drain-channel interface), with high Schottky barrier heights of 0.21, 0.46 (n-type), 0.30, 0.41, and 0.46 (p-type) eV, respectively. A graphdiyne field effect transistor (FET) with Al electrodes was simulated using quantum transport calculations. This device exhibits an on-off ratio up to 104 and a very large on-state current of 1.3 × 104 mA mm-1 in a 10 nm channel length. Thus, a new prospect has opened up for graphdiyne in high performance nanoscale devices. Electronic supplementary information (ESI

  19. Quantum point contacts as heat engines

    NASA Astrophysics Data System (ADS)

    Pilgram, Sebastian; Sánchez, David; López, Rosa

    2015-11-01

    The efficiency of macroscopic heat engines is restricted by the second law of thermodynamics. They can reach at most the efficiency of a Carnot engine. In contrast, heat currents in mesoscopic heat engines show fluctuations. Thus, there is a small probability that a mesoscopic heat engine exceeds Carnot's maximum value during a short measurement time. We illustrate this effect using a quantum point contact as a heat engine. When a temperature difference is applied to a quantum point contact, the system may be utilized as a source of electrical power under steady state conditions. We first discuss the optimal working point of such a heat engine that maximizes the generated electrical power and subsequently calculate the statistics for deviations of the efficiency from its most likely value. We find that deviations surpassing the Carnot limit are possible, but unlikely.

  20. Contact breaking in frictionless granular packings

    NASA Astrophysics Data System (ADS)

    Wu, Qikai; Bertrand, Thibault; O'Hern, Corey; Shattuck, Mark

    We numerically study the breaking of interparticle contact networks in static granular packings of frictionless bidisperse disks that are subjected to vibrations. The packings are created using an isotropic compression protocol at different values of the total potential energy per particle Ep. We first add displacements along a single vibrational mode i of the dynamical matrix to a given packing and calculate the minimum amplitude Ai of the perturbation at which the first interparticle contact breaks. We then identify the minimum amplitude Amin over all perturbations along each mode and study the distribution of Amin from an ensemble of packings at each Ep. We then study two-, three-, and multi-mode excitations and determine the dependence of Amin on the number of modes that are included in the perturbation. W. M. Keck Foundation Science and Engineering Grant.

  1. [Allergic contact dermatitis in beauty parlor clients].

    PubMed

    Gottlöber, P; Gall, H; Bezold, G; Peter, R U

    2001-05-01

    Occupational contact dermatitis in hair dressers and beauticians has increased in importance in the past years. Type IV-allergies against glyceryl monothioglycate components of permanent waves are most common. Other occupational allergens include bleach components such as ammonium persulfate and hair dye ingredients such as p-phenylenediamine (PPD) and p-toluylene-diamine (PTD) base. Allergies to hair dyes in customers of hair dressers have rarely been observed. Two female patients developed allergic contact dermatitis of the scalp and face after repeated use of Polycolor intensivtönung schwarz and of Movida color. We also review the current literature on type IV-allergies to components of hair dressing products components. PMID:11405157

  2. Active alignment/contact verification system

    DOEpatents

    Greenbaum, William M.

    2000-01-01

    A system involving an active (i.e. electrical) technique for the verification of: 1) close tolerance mechanical alignment between two component, and 2) electrical contact between mating through an elastomeric interface. For example, the two components may be an alumina carrier and a printed circuit board, two mating parts that are extremely small, high density parts and require alignment within a fraction of a mil, as well as a specified interface point of engagement between the parts. The system comprises pairs of conductive structures defined in the surfaces layers of the alumina carrier and the printed circuit board, for example. The first pair of conductive structures relate to item (1) above and permit alignment verification between mating parts. The second pair of conductive structures relate to item (2) above and permit verification of electrical contact between mating parts.

  3. Electrical contact arrangement for a coating process

    DOEpatents

    Kabagambe, Benjamin; McCamy, James W; Boyd, Donald W

    2013-09-17

    A protective coating is applied to the electrically conductive surface of a reflective coating of a solar mirror by biasing a conductive member having a layer of a malleable electrically conductive material, e.g. a paste, against a portion of the conductive surface while moving an electrodepositable coating composition over the conductive surface. The moving of the electrodepositable coating composition over the conductive surface includes moving the solar mirror through a flow curtain of the electrodepositable coating composition and submerging the solar mirror in a pool of the electrodepositable coating composition. The use of the layer of a malleable electrically conductive material between the conductive member and the conductive surface compensates for irregularities in the conductive surface being contacted during the coating process thereby reducing the current density at the electrical contact area.

  4. Dancing droplets: Contact angle, drag, and confinement

    NASA Astrophysics Data System (ADS)

    Benusiglio, Adrien; Cira, Nate; Prakash, Manu

    2015-11-01

    When deposited on a clean glass slide, a mixture of water and propylene glycol forms a droplet of given contact angle, when both pure liquids spread. (Cira, Benusiglio, Prakash: Nature, 2015). The droplet is stabilized by a gradient of surface tension due to evaporation that induces a Marangoni flow from the border to the apex of the droplets. The apparent contact angle of the droplets depends on both their composition and the external humidity as captured by simple models. These droplets present remarkable properties such as lack of a large pinning force. We discuss the drag on these droplets as a function of various parameters. We show theoretical and experimental results of how various confinement geometries change the vapor gradient and the dynamics of droplet attraction.

  5. Contact tests for pentachlorophenol toxicity to earthworms

    SciTech Connect

    Spontak, D.A.

    1994-12-31

    The standardized contact filter paper test (EEC and OECD) provides an effective screening test for toxicity to earthworms in a laboratory setting. A need exists for a reliable and inexpensive technique for non-laboratory settings where screening is desired, but facilities cannot provide for the acquisition and maintenance of the glass vials required by the standardized test. This study evaluated two modifications of the standardized test using clear polyethylene bags, with and without filter paper, with Eisenia fetida and domesticated surface-feeding earthworms. The tests were conducted according to EEC and OECD guidelines. Results of the modified tests corresponded in dose and effect to the standardized contact filter paper test indicating the usefulness of the modified tests.

  6. Contact ice nucleation by submicron atmospheric aerosols

    NASA Technical Reports Server (NTRS)

    Deshler, T.

    1982-01-01

    An apparatus designed to measure the concentrations of submicron contact ice nuclei is described. Here, natural forces transfer nuclei to supercooled sample drops suspended in an aerosol stream. Experimental measurements of the scavenging rate of the sample drops for several humidities and aerosol sizes are found to be in agreement with theory to within a factor of two. This fact, together with the statistical tests showing a difference between the data and control samples, is seen as indicating that a reliable measurement of the concentrations of submicron contact ice nuclei has been effected. A figure is included showing the ice nucleus concentrations as a function of temperature and assumed aerosol radius. For a 0.01 micron radius, the average is 1/liter at -15 C and 3/liter at -18 C. It is noted that the measurements are in fair agreement with ice crystal concentrations in stable winter clouds measured over Elk Mountain, WY (Vali et al., 1982).

  7. Providing contact cards for relatives following bereavement.

    PubMed

    Clarke, K; Pearson, N

    This article describes the implementation of a Welsh Assembly Government policy to improve customer service and provide an opportunity for relatives to seek further information about the death of a loved one in an acute hospital setting. A new relative-centred pathway has been developed. It offers a single point of contact for recently bereaved relatives and provides an opportunity to discuss any concerns or anxieties in relation to the care and/or treatment in the final hours of their loved one's life. The pathway includes a contact card with the name and number of a designated person and is a more informal, empathetic and person-centred service than the formal complaint process. PMID:20687289

  8. 'Contact' in Space Leads to New Lenses

    NASA Technical Reports Server (NTRS)

    2004-01-01

    While gravity has its advantages in keeping us balanced and grounded here on Earth, scientists often find that they are at a disadvantage when trying to conduct research under its powerful, pulling influence. In these instances, the scientists prefer performing their studies in the weightless atmosphere of microgravity, where gravity is greatly reduced and solids, liquids, and gases behave differently. In 1993, Paragon Vision Sciences, Inc., of Mesa, Arizona, participated in a research project with NASA's Langley Research Center to perfect a process for developing contact lenses. The project called for three experiments that would fly onboard the Space Shuttle over the course of three separate missions, from 1993 to 1996. By unleashing contact lens materials to the microgravity settings of space, scientists from NASA and Paragon hoped to better understand how polymers - large molecules that make up plastics - are formed.

  9. Taming contact line instability for pattern formation

    NASA Astrophysics Data System (ADS)

    Deblais, A.; Harich, R.; Colin, A.; Kellay, H.

    2016-08-01

    Coating surfaces with different fluids is prone to instability producing inhomogeneous films and patterns. The contact line between the coating fluid and the surface to be coated is host to different instabilities, limiting the use of a variety of coating techniques. Here we take advantage of the instability of a receding contact line towards cusp and droplet formation to produce linear patterns of variable spacings. We stabilize the instability of the cusps towards droplet formation by using polymer solutions that inhibit this secondary instability and give rise to long slender cylindrical filaments. We vary the speed of deposition to change the spacing between these filaments. The combination of the two gives rise to linear patterns into which different colloidal particles can be embedded, long DNA molecules can be stretched and particles filtered by size. The technique is therefore suitable to prepare anisotropic structures with variable properties.

  10. Non-Contact Gaging with Laser Probe

    SciTech Connect

    Clinesmith, Mike

    2009-03-20

    A gage has been constructed using conventional (high end) components for the application of measuring fragile syntactic foam parts in a non-contact mode. Success with this approach has been achieved through a novel method of transferring (mapping) high accuracy local measurements of a coated aluminum master, taken on a Leitz Coordinate Measurement Machine (CMM), to the gage software system. The mapped data is then associated with local voltage readings from two (inner and outer) laser triangulating probes. This couples discreet laser probe offset and linearity characteristics to the measured master geometry. The gage software compares real part measured data against the master data to provide non-contact part inspection that results in a high accuracy and low uncertainty performance. Uncertainty from the part surface becomes the prevailing contributor to the gaging process. The gaging process provides a high speed, hands off measurement with nearly zero impedance.

  11. Isolation of focal contact membrane using saponin.

    PubMed

    Neyfakh, A A; Svitkina, T M

    1983-12-01

    The fragments of lower cell surface remained attached to the substrate after incubation of mouse or chick fibroblasts in 0.2% saponin solution and subsequent removal of cells under the action of shearing force. These fragments corresponded exactly to the cellular focal contacts seen by interference reflection microscopy. Ultrastructurally they were membrane fragments with typical three-layered structure. No cytoskeletal components were found in saponin-isolated focal contact membranes either by immunofluorescence or electron microscopy. Only one major cell-derived protein with an apparent molecular weight (MW) of 51 kD (chick embryo fibroblasts) or 47 kD (mouse embryo fibroblasts) remained on the substrate after saponin treatment and removal of cells.

  12. Contact between traps and surfaces during contact sampling of explosives in security settings.

    PubMed

    Chaffee-Cipich, Michelle N; Hoss, Darby J; Sweat, Melissa L; Beaudoin, Stephen P

    2016-03-01

    Realistic descriptions of interfacial contact between rough, deformable surfaces under load are difficult to obtain; however, this contact is of great import in a wide range of applications. Here, we detail, through experiment and computational simulation, the interfacial contact between four common traps and five commonly investigated surfaces encountered in explosives detection applications associated with airport security. The Young's modulus and hardness of four traps and seven substrates were measured using nanoindentation. These properties determine how deformation occurs when traps are applied for contact sampling of explosives. The nanoindentation data were analyzed using the Oliver-Pharr method, and an indenter area function was created using silicon and gold as the reference materials. The Young's moduli of the traps ranged from 0.2 to 8 GPa, while those of the surfaces ranged from 0.5 to 4 GPa. The hardness values of the traps ranged from 0.005 to 0.22 GPa, while those of the surfaces ranged from 0.02 to 0.2 GPa. For each of 20 scenarios (4 traps, 5 surfaces), six contact simulations were performed. In these contact simulations, the Greenwood-Willliamson microcontact model was used to represent the behavior of the asperities on the traps, while the Timoshenko Beam model was used to describe the macroscopic behavior of the bulk trap materials spanning the space between asperities. This combination of feature- and trap-scale modeling provides a more realistic description of the interfacial contact than either model applied individually. The calculated distributions of separation distances between the traps and surfaces when the traps were contacted with the surfaces under a normal load were compared to estimate the relative effectiveness of the traps at interrogating the topography of the surfaces. This method is proposed as a tool to guide the development of trap materials for surface sampling and surface cleaning applications. PMID:26836243

  13. Contact between traps and surfaces during contact sampling of explosives in security settings.

    PubMed

    Chaffee-Cipich, Michelle N; Hoss, Darby J; Sweat, Melissa L; Beaudoin, Stephen P

    2016-03-01

    Realistic descriptions of interfacial contact between rough, deformable surfaces under load are difficult to obtain; however, this contact is of great import in a wide range of applications. Here, we detail, through experiment and computational simulation, the interfacial contact between four common traps and five commonly investigated surfaces encountered in explosives detection applications associated with airport security. The Young's modulus and hardness of four traps and seven substrates were measured using nanoindentation. These properties determine how deformation occurs when traps are applied for contact sampling of explosives. The nanoindentation data were analyzed using the Oliver-Pharr method, and an indenter area function was created using silicon and gold as the reference materials. The Young's moduli of the traps ranged from 0.2 to 8 GPa, while those of the surfaces ranged from 0.5 to 4 GPa. The hardness values of the traps ranged from 0.005 to 0.22 GPa, while those of the surfaces ranged from 0.02 to 0.2 GPa. For each of 20 scenarios (4 traps, 5 surfaces), six contact simulations were performed. In these contact simulations, the Greenwood-Willliamson microcontact model was used to represent the behavior of the asperities on the traps, while the Timoshenko Beam model was used to describe the macroscopic behavior of the bulk trap materials spanning the space between asperities. This combination of feature- and trap-scale modeling provides a more realistic description of the interfacial contact than either model applied individually. The calculated distributions of separation distances between the traps and surfaces when the traps were contacted with the surfaces under a normal load were compared to estimate the relative effectiveness of the traps at interrogating the topography of the surfaces. This method is proposed as a tool to guide the development of trap materials for surface sampling and surface cleaning applications.

  14. [Allergic contact eczema caused by dicyanodiamide].

    PubMed

    Senff, H; Kuhlwein, A; Hausen, B M

    1988-01-01

    After four years employment in a factory manufacturing flame retardants, a 29 year old man developed eczematous reactions on both hands. Patch tests performed with different agents handled by the patient solely at his place of work were positive for the flame retardant and dicyanodiamide, even in high dilutions. Upon changing jobs, the lesions healed completely. To our knowledge, this is the first recorded instance of a contact allergy due to dicyanodiamide in the pertinent literature.

  15. [Allergic contact dermatitis due to prednicarbate].

    PubMed

    Senff, H; Kunz, R; Köllner, A; Kunze, J

    1991-01-01

    Two female patients developed an allergic contact dermatitis after using Dermatop cream and -ointment for several weeks. Patch tests were positive with the reagent prednicarbate itself. No cross reactions to other glucocorticosteroids were observed. Type-IV-sensitization to glucocorticosteroids should be considered if chronic dermatitis does not improve, or even becomes worse, in spite of adequate therapy. With regard to possible cross reactions or multiple sensitization, epicutaneous tests with other glucocorticosteroids are necessary.

  16. Contact hypersensitivity to some perfume materials.

    PubMed

    Mitchell, J C

    1975-08-01

    Some recent publications concerning perfume contact sensitivity are briefly reviewed. Japanese workers have identified some perfume sensitizers and have devised an allergen replacement system. Costus absolute of perfumery has been found to sensitize guinea-pig and man; sesquiterpene lactones are responsible for cross-sensitivity with some other plant products. Balsam of Peru is a useful screen for perfume sensitivity; terpenoids of balsams require study.

  17. Contact depigmentation induced by propyl gallate.

    PubMed

    Pandhi, D; Vij, A; Singal, A

    2011-06-01

    We report a 41-year-old woman who developed contact depigmentation at several body sites after using lipstick, liquid kumkum (a colouring usually made from turmeric or saffron used for social/religious markings), and plastic or rubber slippers (flip-flops). Propyl gallate, a common ingredient to all and a previously undocumented depigmenting agent, was incriminated on patch testing with the Indian standard series. PMID:21564173

  18. Contact thermal conductivity in lunar aggregates.

    NASA Technical Reports Server (NTRS)

    Pilbeam, C. C.; Vaisnys, J. R.

    1973-01-01

    The contribution of the contact conductivity to the thermal conductivity in aggregates is found to depend on pressure with an exponent greater than 1/3 and, for a specific model with an exponent of 3/5, when the particle packing is irregular. A lunar thermal conductivity profile near the surface, including a term involving depth to the 3/5 power, is considered.

  19. Contact radiator burn subsequent to spinal anaesthesia.

    PubMed

    Sever, C; Aysal, B K; Sahin, C; Kulahci, Y

    2012-06-30

    An unusual case is reported in which a patient sustained a third-degree burn of the plantar surface of the right foot as the result of contact with a heating radiator. This occurred when the patient fell asleep in his hospital bed after knee surgery. Spinal anaesthesia is easy to perform, and the risk factors, though present, are not serious. Such accidents are not infrequent and care should be taken to prevent them.

  20. Multidimensional Contact Moduli of Elastically Anisotropic Solids

    SciTech Connect

    Gao, Yanfei; Pharr, George Mathews

    2007-01-01

    Effective moduli of elastically anisotropic solids under normal and tangential contacts are derived using the Stroh formalism and the two dimensional Fourier transform. Each Fourier component corresponds to a plane field in the plane spanned by the surface normal and a wavevector, the solution of which only involves an algebraic eigenvalue problem. Exact solutions are obtained for indenters described by parabolae of revolution, which are found to be a good approximation for arbitrary axisymmetric indenters.

  1. Contact electrification field-effect transistor.

    PubMed

    Zhang, Chi; Tang, Wei; Zhang, Limin; Han, Changbao; Wang, Zhong Lin

    2014-08-26

    Utilizing the coupled metal oxide semiconductor field-effect transistor and triboelectric nanogenerator, we demonstrate an external force triggered/controlled contact electrification field-effect transistor (CE-FET), in which an electrostatic potential across the gate and source is created by a vertical contact electrification between the gate material and a “foreign” object, and the carrier transport between drain and source can be tuned/controlled by the contact-induced electrostatic potential instead of the traditional gate voltage. With the two contacted frictional layers vertically separated by 80 μm, the drain current is decreased from 13.4 to 1.9 μA in depletion mode and increased from 2.4 to 12.1 μA in enhancement mode at a drain voltage of 5 V. Compared with the piezotronic devices that are controlled by the strain-induced piezoelectric polarization charged at an interface/junction, the CE-FET has greatly expanded the sensing range and choices of materials in conjunction with semiconductors. The CE-FET is likely to have important applications in sensors, human–silicon technology interfacing, MEMS, nanorobotics, and active flexible electronics. Based on the basic principle of the CE-FET, a field of tribotronics is proposed for devices fabricated using the electrostatic potential created by triboelectrification as a “gate” voltage to tune/control charge carrier transport in conventional semiconductor devices. By the three-way coupling among triboelectricity, semiconductor, and photoexcitation, plenty of potentially important research fields are expected to be explored in the near future. PMID:25119657

  2. Tool Indicates Contact Angles In Bearing Raceways

    NASA Technical Reports Server (NTRS)

    Akian, Richard A.; Butner, Myles F.

    1995-01-01

    Tool devised for use in measuring contact angles between balls and races in previously operated ball bearings. Used on both inner and outer raceways of bearings having cross-sectional widths between approximately 0.5 and 2.0 in. Consists of integral protractor mounted in vertical plane on bracket equipped with leveling screws and circular level indicator. Protractor includes rotatable indicator needle and set of disks of various sizes to fit various raceway curvatures.

  3. DNA transfer through nonintimate social contact.

    PubMed

    Jones, S; Scott, K; Lewis, J; Davidson, G; Allard, J E; Lowrie, C; McBride, B M; McKenna, L; Teppett, G; Rogers, C; Clayson, N; Baird, A

    2016-03-01

    The UK and Ireland Association of Forensic Science Providers' (AFSP) Body Fluid Forum (BFF) set out to assist in the interpretation of sexual offence cases where semen is absent on vaginal swabs but female DNA is present on penile swabs or male underwear, and the issue to be addressed is whether or not sexual intercourse occurred. This study aims to investigate the frequency and amount of female DNA transferred to the penis and underwear of males following staged nonintimate social contact with females and to compare the findings with the amount of female DNA transferred to the penis and subsequently to the underwear of a male who had engaged in unprotected sexual intercourse with a female. In this study, no matching female DNA was detected on the inside front of the 44 items of male underwear used in this research following staged contact of a nonintimate nature and subsequent secondary transfer to the penis. After sexual intercourse, full profiles matching the female participant were found on the inside front of the males underwear with maximum peak heights in the range between 1898 and 3157 rfu. It was possible to demonstrate that DNA can occasionally transfer to the waistband and outside front of underwear worn by a male following staged nonintimate social contact. Data obtained in this study suggest that a matching female DNA profile below a peak height of 1000 rfu on the waistband of a male's underwear might be explained by nonintimate social contact with secondary transfer of female DNA from the male's hands. PMID:26976466

  4. Kalt, keratoconus, and the contact lens.

    PubMed

    Pearson, R M

    1989-09-01

    A complete English translation is presented of the communication given in 1888 by Professor Photinos Panas in which he reported the innovative use by his junior colleague, Dr. Eugène Kalt, of a contact shell in a case of keratoconus. The patient showed a dramatic visual improvement but tolerance of the shell was limited to a few hours. A biography of Kalt is included, together with a number of explanatory notes.

  5. The contact mechanics of fractal surfaces.

    PubMed

    Buzio, Renato; Boragno, Corrado; Biscarini, Fabio; Buatier de Mongeot, Francesco; Valbusa, Ugo

    2003-04-01

    The role of surface roughness in contact mechanics is relevant to processes ranging from adhesion to friction, wear and lubrication. It also promises to have a deep impact on applied science, including coatings technology and design of microelectromechanical systems. Despite the considerable results achieved by indentation experiments, particularly in the measurement of bulk hardness on nanometre scales, the contact behaviour of realistic surfaces, showing random multiscale roughness, remains largely unknown. Here we report experimental results concerning the mechanical response of self-affine thin films indented by a micrometric flat probe. The specimens, made of cluster-assembled carbon or of sexithienyl, an organic molecular material, were chosen as prototype systems for the broad class of self-affine fractal interfaces, today including surfaces grown under non-equilibrium conditions, fractures, manufactured metal surfaces and solidified liquid fronts. We observe that a regime exists in which roughness drives the contact mechanics: in this range surface stiffness varies by a few orders of magnitude on small but significant changes of fractal parameters. As a consequence, we demonstrate that soft solid interfaces can be appreciably strengthened by reducing both fractal dimension and surface roughness. This indicates a general route for tailoring the mechanical properties of solid bodies. PMID:12690395

  6. Piezoviscous effects in nonconformal contacts lubricated hydrodynamically

    NASA Technical Reports Server (NTRS)

    Jeng, Y. R.; Hamrock, B. J.; Brewe, D. E.

    1985-01-01

    The analysis is concerned with the piezoviscous-rigid regime of lubrication for the general case of elliptical contacts. In this regime several formulas of the lubricant film thickness have been proposed by Hamrock and Dowson, by Dowson et al., and more recently by Houpert. However, either they do not include the load parameter W, which has a strong effect on film thickness, or they overestimate the film thickness by using the Barus formula for pressure-viscosity characteristics. The Roelands formula was used for the pressure-viscosity relationship. The effects of the dimensionless load, speed, and materials parameters, the radius ratio, and the lubricant entrainment direction were investigated. The dimensionless load parameter was varied over a range of one order of magnitude. The dimensionless speed parameter was varied by 5.6 times the lowest value. Conditions corresponding to the use of solid materials of steel, bronze, and silicon nitride and lubricants of paraffinic and naphthenic mineral oil were considered in obtaining the exponent in the dimensionless materials parameter. The radius ratio was varied from 0.2 to 64 (a configuration approaching a line contact). Forty-one cases were used in obtaining a minimum film thickness formula. Contour plots indicate in detail the pressure developed between the contacting solids.

  7. Slip in viscous contact-line movement

    NASA Astrophysics Data System (ADS)

    van Lengerich, Henrik; Steen, Paul; Breuer, Kenneth

    2011-11-01

    The typical continuum fluid dynamics formulation cannot be used to model the spreading of a liquid on a solid because a stress singularity prevents contact-line motion. It is well known that this situation can be remedied by introducing a slip. We perform Stokes-flow simulations with slip and compare these with experiments. In the experiment, liquid (squalane) is forced through two parallel sapphire plates (roughness 0.6nm), and the meniscus shape and its speed are measured. The slip-length for this liquid/solid pair has been measured previously in an independent experiment absent of contact lines (T. Schmatko et. al. PRL 94, 244501). The same geometry is used in a boundary integral method simulation, accurate to within a few molecular diameters in the vicinity of the contact-line. The slip-length in the simulations can be varied such that the meniscus shape matches the experiment. Preliminary results suggest this slip-length is an order of magnitude lower than that reported by Schmatko. Now at the University of Minnesota TC

  8. Laser surface texturing for high friction contacts

    NASA Astrophysics Data System (ADS)

    Dunn, A.; Wlodarczyk, K. L.; Carstensen, J. V.; Hansen, E. B.; Gabzdyl, J.; Harrison, P. M.; Shephard, J. D.; Hand, D. P.

    2015-12-01

    A pulsed, nanosecond fibre laser with wavelength of 1064 nm was used to texture grade 316 stainless steel and 'low alloy' carbon steel in order to generate contacts with high static friction coefficients. High friction contacts have applications in reducing the tightening force required in joints or to easily secure precision fittings, particularly for larger components where standard methods are difficult and expensive. Friction tests performed at normal pressures of 100 MPa and 50 MPa have shown that very high static friction coefficients greater than 1.25, an increase of 346% over untextured samples at 100 MPa, can be easily achieved by single pass laser texturing of both contacting surfaces with the use of low pulse separations. The high static friction coefficients, obtained at 100 MPa normal pressure with textures with up to 62.5 μm pulse separation (processing speed ∼0.67 cm2/s), were found to be associated with a significant amount of plastic deformation caused by the high normal pressures. As a result, higher normal pressures were found to result in higher friction coefficients.

  9. Physiologic activities of the contact activation system.

    PubMed

    Schmaier, Alvin H

    2014-05-01

    The plasma contact activation (CAS) and kallikrein/kinin (KKS) systems consist of 4 proteins: factor XII, prekallikrein, high molecular weight kininogen, and the bradykinin B2 receptor. Murine genetic deletion of factor XII (F12(-/-)), prekallikrein (Klkb1(-/-)), high molecular weight kininogen (Kgn1(-/-)) and the bradykinin B2 receptor (Bdkrb2(-/-)) yield animals protected from thrombosis. With possible exception of F12(-/-) and Kgn1(-/-) mice, the mechanism(s) for thrombosis protection is not reduced contact activation. Bdkrb2(-/-) mice are best characterized and they are protected from thrombosis through over expression of components of the renin angiotensin system (RAS) leading to elevated prostacyclin with vascular and platelet inhibition. Alternatively, prolylcarboxypeptidase, a PK activator and degrader of angiotensin II, when deficient in the mouse leads to a prothrombotic state. Its mechanism for increased thrombosis also is mediated in part by components of the RAS. These observations suggest that thrombosis in mice of the CAS and KKS are mediated in part through the RAS and independent of reduced contact activation. PMID:24759141

  10. Direct contact heat exchangers for space

    NASA Astrophysics Data System (ADS)

    Taussig, R. T.; Thayer, W. J.; Lo, V. C. H.; Sakins, K. M.; Bruckner, A. P.

    1985-06-01

    Direct contact heat exchanger concepts have been investigated for use in space, including droplet vortex heat exchangers, coflowing droplet heat exchangers, electrostatically driven heat exchangers, and belt and disk heat exchangers. These concepts are characterized by a low heat exchanger mass per unit of heat transferred, low pressure losses, high reliability, and compactness in design. Operation in zero-G poses unique problems for those direct contact heat exchangers which require separation of two fluid media after heat transfer is completed. Other problems include maintenance of good heat transfer coefficients in the absence of buoyant forces, exposure of heat transfer media to vacuum conditions for certain applications, and materials compatibility. A preliminary systems analysis indicates the potential for substantial weight reductions in turbine Brayton cycle space power systems for output powers above several MW(e). Based on the status of current technology and the results of this analysis, recommendations are made for the most attractive applications and the R&D required to ready a direct contact heat exchanger for use in space.

  11. Interstellar Contact - A Thousand-Year Perspective

    NASA Astrophysics Data System (ADS)

    Tough, A.

    Rapid progress is already being made in space exploration and the scientific search for intelligent life. By the year 3000, humankind will likely be sending extraordinarily smart probes and even staffed spaceships to explore nearby stars and planetary systems. Because any other civilizations in our galaxy are likely much older than humankind, their technology likely became capable long ago of exploring their galactic neighbourhood. Their motivation to do so is probably very strong, according to three sets of disciplined speculation: some role-playing exercises; a set of four universal values shared by all civilizations; and Vulpetti's Conscious-Life Expansion Principle. If other civilizations (or their intelligent probes) are already traveling throughout the galaxy, and if we do the same by the year 3000, it seems highly probable that contact will be made one way or another. Indeed, during the next 1000 years, we may experience contact in various ways (telescopes, probes, or staffed spacecraft) and with various civilizations. Of all the positive events that humanity will experience over the next 1000 years, interstellar contact will likely have the highest impact. Humanity's major benefits will likely include practical information, answers to major questions, changes in our view of ourselves, and cooperation in joint galactic projects.

  12. The contact mechanics of fractal surfaces.

    PubMed

    Buzio, Renato; Boragno, Corrado; Biscarini, Fabio; Buatier de Mongeot, Francesco; Valbusa, Ugo

    2003-04-01

    The role of surface roughness in contact mechanics is relevant to processes ranging from adhesion to friction, wear and lubrication. It also promises to have a deep impact on applied science, including coatings technology and design of microelectromechanical systems. Despite the considerable results achieved by indentation experiments, particularly in the measurement of bulk hardness on nanometre scales, the contact behaviour of realistic surfaces, showing random multiscale roughness, remains largely unknown. Here we report experimental results concerning the mechanical response of self-affine thin films indented by a micrometric flat probe. The specimens, made of cluster-assembled carbon or of sexithienyl, an organic molecular material, were chosen as prototype systems for the broad class of self-affine fractal interfaces, today including surfaces grown under non-equilibrium conditions, fractures, manufactured metal surfaces and solidified liquid fronts. We observe that a regime exists in which roughness drives the contact mechanics: in this range surface stiffness varies by a few orders of magnitude on small but significant changes of fractal parameters. As a consequence, we demonstrate that soft solid interfaces can be appreciably strengthened by reducing both fractal dimension and surface roughness. This indicates a general route for tailoring the mechanical properties of solid bodies.

  13. Posterior labral injury in contact athletes.

    PubMed

    Mair, S D; Zarzour, R H; Speer, K P

    1998-01-01

    Nine athletes (seven football offensive linemen, one defensive lineman, and one lacrosse player) were found at arthroscopy to have posterior labral detachment from the glenoid. In our series, this lesion is specific to contact athletes who engage their opponents with arms in front of the body. All patients had pain with bench pressing and while participating in their sport, diminishing their ability to play effectively. Conservative measures were ineffective in relieving their symptoms. Examination under anesthesia revealed symmetric glenohumeral translation bilaterally, without evidence of posterior instability. Treatment consisted of glenoid rim abradement and posterior labral repair with a bioabsorbable tack. All patients returned to complete at least one full season of contact sports and weightlifting without pain (minimum follow-up, > or = 2 years). Although many injuries leading to subluxation of the glenohumeral joint occur when an unanticipated force is applied, contact athletes ready their shoulder muscles in anticipation of impact with opponents. This leads to a compressive force at the glenohumeral joint. We hypothesize that, in combination with a posteriorly directed force at impact, the resultant vector is a shearing force to the posterior labrum and articular surface. Repeated exposure leads to posterior labral detachment without capsular injury. Posterior labral reattachment provides consistently good results, allowing the athlete to return to competition.

  14. Quantification of a contact stimulus by diapers

    NASA Astrophysics Data System (ADS)

    Nomata, Takuya; Okuyama, Takeshi; Teraoka, Hiromi; Murakami, Yasuo; Miyazawa, Kiyoshi; Tanaka, Mami

    2009-12-01

    This paper describes a development of a sensor system for measurement of a contact stimulus which diapers give to infants. A polyvinyliden fluoride (PVDF) film and a strain gauge are used as the sensor receptors. The PVDF is a kind of piezoelectric material. The sensor consists of a surface contact layer, a PVDF film, a strain gauge and an aluminum plate. First, in order to investigate the sensor performance, the sensor was located on a silicone plate and the upper part of the sensor was rubbed with an acrylic artificial finger. The finger enabled the measurement to carry out at a constant speed and force. Next, the sensor was attached on an infant dummy and the sensor outputs were measured under conditions with and without diapers. By comparison of the output under two different conditions, it was confirmed that there is a clearly difference between the two conditions. It was found that the developed sensor system has the possibility to quantify a contact stimulus which diapers give infants.

  15. Quantification of a contact stimulus by diapers

    NASA Astrophysics Data System (ADS)

    Nomata, Takuya; Okuyama, Takeshi; Teraoka, Hiromi; Murakami, Yasuo; Miyazawa, Kiyoshi; Tanaka, Mami

    2010-01-01

    This paper describes a development of a sensor system for measurement of a contact stimulus which diapers give to infants. A polyvinyliden fluoride (PVDF) film and a strain gauge are used as the sensor receptors. The PVDF is a kind of piezoelectric material. The sensor consists of a surface contact layer, a PVDF film, a strain gauge and an aluminum plate. First, in order to investigate the sensor performance, the sensor was located on a silicone plate and the upper part of the sensor was rubbed with an acrylic artificial finger. The finger enabled the measurement to carry out at a constant speed and force. Next, the sensor was attached on an infant dummy and the sensor outputs were measured under conditions with and without diapers. By comparison of the output under two different conditions, it was confirmed that there is a clearly difference between the two conditions. It was found that the developed sensor system has the possibility to quantify a contact stimulus which diapers give infants.

  16. Estimating collision efficiencies from contact freezing experiments

    NASA Astrophysics Data System (ADS)

    Nagare, B.; Marcolli, C.; Stetzer, O.; Lohmann, U.

    2015-04-01

    Interactions of atmospheric aerosols with clouds influence cloud properties and modify the aerosol life cycle. Aerosol particles act as cloud condensation nuclei and ice nucleating particles or become incorporated into cloud droplets by scavenging. For an accurate description of aerosol scavenging and ice nucleation in contact mode, collision efficiency between droplets and aerosol particles needs to be known. This study derives the collision rate from experimental contact freezing data obtained with the ETH Collision Ice Nucleation Chamber CLINCH. Freely falling 80 μm water droplets are exposed to an aerosol consisting of 200 nm diameter silver iodide particles of concentrations from 500-5000 cm-3, which act as ice nucleating particles in contact mode. The chamber is kept at ice saturation in the temperature range from 236-261 K leading to slow evaporation of water droplets giving rise to thermophoresis and diffusiophoresis. Droplets and particles bear charges inducing electrophoresis. The experimentally derived collision efficiency of 0.13 is around one order of magnitude higher than theoretical formulations which include Brownian diffusion, impaction, interception, thermophoretic, diffusiophoretic and electric forces. This discrepancy is most probably due to uncertainties and inaccuracies in the description of thermophoretic and diffusiophoretic processes acting together. This is to the authors knowledge the first dataset of collision efficiencies acquired below 273 K. More such experiments with different droplet and particle diameters are needed to improve our understanding of collision processes acting together.

  17. N° 28-1998: SOHO spacecraft contacted

    NASA Astrophysics Data System (ADS)

    Contact has been re-established with the ESA/NASA Solar and Heliospheric Observatory (SOHO) following six weeks of silence. Signals sent yesterday through the NASA Deep Space Network (DSN) station at Canberra, Australia, were answered at 22:51 GMT in the form of bursts of signal lasting from 2 to 10 seconds. These signals were recorded both by the NASA DSN station and the ESA Perth station. Contact is being maintained through the NASA DSN stations at Goldstone (California), Canberra and Madrid (Spain). Although the signals are intermittent and do not contain any data information, they show that the spacecraft is still capable of receiving and responding to ground commands. The slow process of regaining control of the spacecraft and restoring it to an operational attitude will commence immediately, with attempts to initiate data transmissions in order to perform an initial assessment of the spacecraft on-board conditions. Radio contact with SOHO, a joint mission of the European Space Agency and NASA, was interrupted on 25 June (see ESA press releases N°24,25 and 26-98). More information on SOHO, including mission status reports is available on the Internet at http://sohowww.estec.esa.nl or via the new ESA science website: http://sci.esa.int

  18. Numerical Simulation of Dynamic Contact Angles and Contact Lines in Multiphase Flows using Level Set Method

    NASA Astrophysics Data System (ADS)

    Pendota, Premchand

    Many physical phenomena and industrial applications involve multiphase fluid flows and hence it is of high importance to be able to simulate various aspects of these flows accurately. The Dynamic Contact Angles (DCA) and the contact lines at the wall boundaries are a couple of such important aspects. In the past few decades, many mathematical models were developed for predicting the contact angles of the inter-face with the wall boundary under various flow conditions. These models are used to incorporate the physics of DCA and contact line motion in numerical simulations using various interface capturing/tracking techniques. In the current thesis, a simple approach to incorporate the static and dynamic contact angle boundary conditions using the level set method is developed and implemented in multiphase CFD codes, LIT (Level set Interface Tracking) (Herrmann (2008)) and NGA (flow solver) (Desjardins et al (2008)). Various DCA models and associated boundary conditions are reviewed. In addition, numerical aspects such as the occurrence of a stress singularity at the contact lines and grid convergence of macroscopic interface shape are dealt with in the context of the level set approach.

  19. Elastic contact mechanics: percolation of the contact area and fluid squeeze-out.

    PubMed

    Persson, B N J; Prodanov, N; Krick, B A; Rodriguez, N; Mulakaluri, N; Sawyer, W G; Mangiagalli, P

    2012-01-01

    The dynamics of fluid flow at the interface between elastic solids with rough surfaces depends sensitively on the area of real contact, in particular close to the percolation threshold, where an irregular network of narrow flow channels prevails. In this paper, numerical simulation and experimental results for the contact between elastic solids with isotropic and anisotropic surface roughness are compared with the predictions of a theory based on the Persson contact mechanics theory and the Bruggeman effective medium theory. The theory predictions are in good agreement with the experimental and numerical simulation results and the (small) deviation can be understood as a finite-size effect. The fluid squeeze-out at the interface between elastic solids with randomly rough surfaces is studied. We present results for such high contact pressures that the area of real contact percolates, giving rise to sealed-off domains with pressurized fluid at the interface. The theoretical predictions are compared to experimental data for a simple model system (a rubber block squeezed against a flat glass plate), and for prefilled syringes, where the rubber plunger stopper is lubricated by a high-viscosity silicon oil to ensure functionality of the delivery device. For the latter system we compare the breakloose (or static) friction, as a function of the time of stationary contact, to the theory prediction.

  20. Comparation of effectiveness of silicone hydrogel contact lens and hydrogel contact lens in patients after LASEK

    PubMed Central

    Xie, Wen-Juan; Zeng, Jin; Cui, Ying; Li, Juan; Li, Zhong-Ming; Liao, Wei-Xiong; Yang, Xiao-Hong

    2015-01-01

    AIM To conduct a comparative study of effectiveness of silicone hydrogel contact lens and hydrogel contact lens, which are used in patients after laser-assisted subepithelial keratomileusis (LASEK). METHODS Sixty-three patients (121 eyes) with a spherical equivalent ≤-5.0 D were chosen after undergoing LASEK in 2012 at Guangdong General Hospital. They were randomly divided into 2 groups. The silicone hydrogel group included 32 cases (61 eyes) that wore silicone hydrogel contact lenses for 4-6d after the operation, while the hydrogel group included 31 cases (60 eyes) who wore hydrogel contact lenses for 4-6d after the operation. Patients' self-reported postoperative symptoms (including pain, photophobia, tears, and foreign body sensation) were evaluated. The healing time of the corneal epithelium, the visual acuity of patients without contact lens after epithelial healing, and the incidence of delayed corneal epithelial shedding were also assessed. The follow-up time was 1mo. RESULTS Postoperative symptoms were milder in the silicone hydrogel group than in the hydrogel group. There were significant differences in pain, foreign body sensation, and photophobia between the 2 groups (P<0.05), although there was no significant difference in postoperative tearing (P>0.05). The healing time of the corneal epithelium in the silicone hydrogel lens group was markedly shorter than that in the hydrogel group (4.07±0.25 vs 4.33±0.82d, t=2.43, P=0.02). Visual acuity without contact lenses after healing of the corneal epithelium was better in the silicone hydrogel group compared with the hydrogel group (χ2=7.76, P=0.02). There was no significant difference in the occurrence of delayed corneal epithelial shedding between the 2 groups (P>0.05). CONCLUSION Patients with LASEK using silicon hydrogel contact lenses had less discomfort and shorter corneal epithelial healing time compared with those using hydrogel contact lenses, suggesting that silicon hydrogel contact lenses may