Science.gov

Sample records for 23rd iaea fusion

  1. 23rd IAEA Fusion Energy Conference: Summary Of Sessions EX/C and ICC

    SciTech Connect

    Hawryluk, R J

    2011-01-05

    An overview is given of recent experimental results in the areas of innovative confinement concepts, operational scenarios and confinement experiments as presented at the 2010 IAEA Fusion Energy Conference. Important new findings are presented from fusion devices worldwide, with a strong focus towards the scientific and technical issues associated with ITER and W7-X devices, presently under construction.

  2. CONFERENCE REPORT: Summary of the 8th IAEA Technical Meeting on Fusion Power Plant Safety

    NASA Astrophysics Data System (ADS)

    Girard, J. Ph.; Gulden, W.; Kolbasov, B.; Louzeiro-Malaquias, A.-J.; Petti, D.; Rodriguez-Rodrigo, L.

    2008-01-01

    for materials selection which will have a large impact on waste disposal and recycling and in the real limits of radiation releases if indexed to the real impact on individuals and the environment given the differences in the types of radiation emitted by tritium when compared with the fission products. Round table sessions resulted in some common recommendations. The discussions also created the awareness of the need for a larger involvement of the IAEA in support of fusion safety standards development.

  3. 25th IAEA Fusion Energy Conference: summary of sessions EX/S, EX/W and ICC

    NASA Astrophysics Data System (ADS)

    Sen, A.

    2015-10-01

    This paper provides a summary overview, based on papers presented at the 25th IAEA Fusion Energy Conference (FEC), in the area of magnetic confinement experiments related to stability (EX/S), wave-plasma interactions, current drive, heating, energetic particles (EX/W) and innovative confinement concepts (ICCs). A selection of results that represent progress made since the last FEC in a few important thematic areas that are relevant for the successful and safe operation of future fusion devices like ITER, is highlighted.

  4. CONFERENCE REPORT: Summary of the 5th IAEA Technical Meeting on Steady State Operation of Magnetic Fusion Devices (Daejeon, Republic of Korea, 14 17 May 2007)

    NASA Astrophysics Data System (ADS)

    Lee, G. S.; Na, Yong-Su; Becoulet, A.; Ide, S.; Kessel, C. E.; Komori, A.; Kuteev, B. V.; Mank, G.; Olstad, R. A.; Sarkar, B.; Sips, A. C. C.; van Houtte, D.; Vdovin, V. L.

    2008-08-01

    This report summarizes the contributions presented at the 5th IAEA Technical Meeting on Steady State Operation of Magnetic Fusion Devices, held in Daejeon, Republic of Korea, 14-17 May 2007. The main topics of the meeting were overview and superconducting devices, long pulse operation and advanced tokamak, steady state fusion technology, heating and current drive, particle control and power exhaust and ITER-related issues.

  5. CONFERENCE REPORT: Summary of the 16th IAEA Technical Meeting on 'Research using Small Fusion Devices'

    NASA Astrophysics Data System (ADS)

    Gribkov, V.; Van Oost, G.; Malaquias, A.; Herrera, J.

    2006-10-01

    Common research topics that are being studied in small, medium and large devices such as H-mode like or improved confinement, turbulence and transport are reported. These included modelling and diagnostic developments for edge and core, to characterize plasma density, temperature, electric potential, plasma flows, turbulence scale, etc. Innovative diagnostic methods were designed and implemented which could be used to develop experiments in small devices (in some cases not possible in large devices due to higher power deposition) to allow a better understanding of plasma edge and core properties. Reports are given addressing research in linear devices that can be used to study particular plasma physics topics relevant for other magnetic confinement devices such as the radial transport and the modelling of self-organized plasma jets involved in spheromak-like plasma formation. Some aspects of the work presented are of interest to the astrophysics community since they are believed to shed light on the basis of the physics of stellar jets. On the dense magnetized plasmas (DMP) topic, the present status of research, operation of new devices, plasma dynamics modelling and diagnostic developments is reported. The main devices presented belong to the class of Z-pinches, mostly plasma foci, and several papers were presented under this topic. The physics of DMP is important both for the main-stream fusion investigations as well as for providing the basis for elaboration of new concepts. New high-current technology introduced in the DMP devices design and construction make these devices nowadays more reliably fitted to various applications and give the possibility to widen the energy range used by them in both directions—to the multi-MJ level facilities and down to miniature plasma focus devices with energy of just a few J.

  6. International society for antiviral research - 23rd international conference.

    PubMed

    Mason, Vicki L

    2010-06-01

    The 23rd International Conference on Antiviral Research (ICAR), organized by the International Society for Antiviral Research (ISAR) and held in San Francisco, included topics covering new therapeutic developments in the field of antivirals. This conference report highlights selected presentations on CD4-BFFI (Roche Holding AG), a CD4 mAb-based bifunctional HIV entry inhibitor; a CLDC-HBsAg vaccine (Juvaris BioTherapeutics Inc/China National Biotec Group) against HBV; ODE-(S)-MPMPA (University of California San Diego), a potent anti-HCV compound; the anti-human CMV activity exhibited by tricin; the protective activity of Ingavirin against influenza A; and Prosetta Bioconformatics's approach to identifying small-molecule antivirals.

  7. A Search for 23rd Magnitude Kuiper Belt Comets

    NASA Technical Reports Server (NTRS)

    Luu, Jane

    1997-01-01

    The goal of the project was to identify a statistically significant sample of large (200 km-sized) Kuiper Belt Objects (KBOs), by covering 10 sq. degrees of the sky to a red limiting magnitude m(sub R) = 23. This work differs from, but builds on, previous surveys of the outer solar system in that it will cover a large area to a limiting magnitude that is deep enough to guarantee positive results. The proposed work should provide us with a significant number of 200 km-size KBOs (approx. 20 are expected) for subsequent studies. Such a sample is crucial if we are to investigate the statistical properties of the Belt and its members. It was modified the original research strategy to accommodate unanticipated problems such as the urgent need for follow-up observations,the original goal was still reached: we have substantially increased the number of Kuiper Belt Objects brighter than 23rd mag.

  8. PREFACE: 15th Latin American Workshop on Plasma Physics (LAWPP 2014) and 21st IAEA TM on Research Using Small Fusion Devices (RUSFD)

    NASA Astrophysics Data System (ADS)

    Iván Vargas-Blanco, V.; Herrera-Velázquez, J. Julio E.

    2015-03-01

    Written contributions from participants of the Joint 15th Latin American Workshop on Plasma Physics (LAWPP 2014) - 21st IAEA Technical Meeting on Research Using Small Fusion Devices (21st IAEA TM RUSFD). The International Advisory Committees of the 15th Latin American Workshop on Plasma Physics (LAWPP 2014) and the 21st IAEA TM on Research Using Small Fusion Devices (RUSFD), agreed to carry out together this Joint LAWPP 2014 - 21st RUSFD in San José, Costa Rica, on 27-31 January 2014. The Joint LAWPP 2014 - 21st RUSFD meeting, organized by the Instituto Tecnológico de Costa Rica, Universidad Nacional de Costa Rica, and Ad Astra Rocket Company in collaboration with the International Atomic Energy Agency (IAEA). The Latin American Workshop on Plasma Physics (LAWPP) is a series of events which has been held periodically since 1982, with the purpose of providing a forum in which the research of the Latin American plasma physics community can be displayed, as well as fostering collaborations among plasma scientists within the region and with researchers from the rest of the world. Recognized plasma scientists from developed countries are specially invited to the meeting to present the state of the art on several "hot" topics related to plasma physics. It is an open meeting, with an International Advisory Committee, in which the working language is English. It was firstly held in 1982 in Cambuquira, Brazil, followed by workshops in Medellín, Colombia (1985), Santiago de Chile, Chile (1988), Buenos Aires, Argentina (1990), Mexico City, Mexico (1992), Foz do Iguaçu, Brazil (1994, combined with the International Congress on Plasma Physics (ICPP)), Caracas, Venezuela (1997), Tandil, Argentina (1998), La Serena, Chile (2000), Sao Pedro, Brazil (2003), Mexico City, Mexico (2005), Caracas, Venezuela (2007), Santiago de Chile, Chile (2010, combined with the ICPP) and Mar de Plata, Argentina (2011). The 21st IAEA TM on Research Using Small Fusion Devices is an ideal forum for

  9. EDITORIAL: 23rd International Laser Physics Workshop (LPHYS'14)

    NASA Astrophysics Data System (ADS)

    2015-03-01

    Dear Readers, The 23rd annual International Laser Physics Workshop, LPHYS'14, took place in the City of Sofia, Bulgaria. 361 participants from 35 countries attended the conference. It was hosted by the Institute of Electronics at the Bulgarian Academy of Sciences. This year's Workshop was dedicated to paying tribute to two major events: • 50th anniversary of 1964 Nobel Prize in physics, • 145th anniversary of the establishment of the Bulgarian Academy of Sciences. LPHYS'14 has been taken under the High Patronage of Rosen Plevneliev, President of the Republic of Bulgaria. The LPHYS'14 Steering Committee and the Advisory & Program Committee would like to extend their sincere gratitude to Professor Sanka Gateva (Co-Chair) and Professor Ekaterina Borisova (Head of the Local Organizing Committee) and to their team for the outstanding job performed in organizing, arranging, managing and putting in order the conference. Their combined efforts lead to a successful result. In this volume of Journal of Physics: Conference Series you will find selected proceedings of the Workshop in Sofia. Please make a note that the 24th annual International Laser Physics Workshop (LPHYS'15) will take place from August 21 to August 25, 2015 in the city of Shanghai, China hosted by Shanghai Institute of Optics and Fine Mechanics at the Chinese Academy of Sciences. With kind regards, Steering and Advisory & Program committees LPHYS'14

  10. IAEA TECDOC 055 Outline

    SciTech Connect

    Shull, Doug

    2015-07-13

    An outline of suggestions for updating a version of IAEA-TECDOC-1276 is provided. This update will become IAEA-TECDOC-055, titled ''IAEA handbook for designing and implementing physical protection systems for nuclear material and nuclear facilities.''

  11. Annual State of Michigan Personnel Officers Conference. (23rd, Cadillac, Michigan, September 15-17, 1969).

    ERIC Educational Resources Information Center

    Michigan State Dept. of Civil Service, Lansing.

    The 23rd Annual State of Michigan Personnel Officers' Conference examined the workings of employee relations with employee organizations. The highlights are reported in this manual. A panel of speakers from industry and education provided conference participants with different points of view and a broadened outlook in the difficult areas of…

  12. Neil Simon's "Laughter on the 23rd Floor." Spotlight on Theater Notes.

    ERIC Educational Resources Information Center

    Carr, John C.

    This booklet presents a variety of materials concerning Neil Simon's play "Laughter on the 23rd Floor." After a brief introduction to the play, the booklet presents a profile of the playwright, several lists of his accomplishments, information on his work for television, a quiz about plays, biographical information on the producer,…

  13. Proceedings of the Joint Seminar; Hydrogen Management in Steel Weldments, Melbourne, Australia, 23rd October 1996.

    DTIC Science & Technology

    1997-01-01

    TECHNOLOGY ORGANISATION Sponsored by US Army Research Office HYDROGEN MANAGEMENT IN STEEL WELDMENTS Joint Seminar Melbourne, Australia 23rd...HYDROGEN MANAGEMENT IN STEEL WELDMENTS • Table of Contents • Preface J.C. Ritter, DSTO Introduction J.L.Dauidson, DSTO and D.L. Olson...Colorado School of Mines Hydrogen Management in High Strength Steel Weldments 1 D.L.Olson, LMaroef, C.Lensing, R.D.Smith, W.W.Wang, S.Liu, T.Wildeman and

  14. Conference Support, 23rd Western Photosynthesis Conference 2014, Final Technical Report

    SciTech Connect

    Wachter, Rebekka

    2015-01-12

    The Western Photosynthesis Conference is a regional conference that is held on an annual basis to bring together researchers primarily from the Western United States to share their newest research advances on photosynthetic processes. The 23rd conference was focused on both fundamental and more applied research on the biological conversion of solar energy to various energy storage forms. Several particular areas of solar energy conversion were emphasized in this conference (see below). Some of these topics, such as carbon limitations on photosynthesis, biomimicry and phenotyping, have traditionally not been incorporated extensively in the Western Photosynthesis Conference. We found that these topics have substantially broadened of the scope of this meeting.

  15. PREFACE: 23rd National Symposium on Plasma Science & Technology (PLASMA-2008)

    NASA Astrophysics Data System (ADS)

    Mago, V. K.; Ananthapadmanabhan, P. V.; Patil, D. S.; Das, A. K.

    2010-01-01

    It is our pleasure to present the proceedings of the 23rd National Symposium on Plasma Science and Technology (PLASMA-2008) held at Bhabha Atomic Research Center, Mumbai, 10- December 2008 in association with the Plasma Science Society of India. The Plasma Science Society of India has been holding regular symposia on general topics related to Plasma. The symposium was designed to provide a forum for young researchers in Plasma Science and Technology to interact with eminent plasma scientists from India and abroad and to present their work. The scope of the symposium included frontline research in Basic Plasma Physics as well as significant advances in Plasma Technology. In view of the ever-growing importance of Plasma Science and Technology to India's Nuclear Energy program, the focal theme of the symposium was chosen as 'Plasmas in Nuclear Fuel Cycle'. The scientific program of this four day symposium consisted of review talks, invited topical lectures, contributed oral and poster presentations in the following areas of Plasma Science & Technology. Basic Plasma Physics, simulations and modeling (BP) Nuclear fusion and Technology (NF) Space & Astrophysical Plasma(SA) Exotic Plasmas, Non-linear Dynamics(EP) Laser Plasma Interaction and Beam Physics (LP) Industrial applications of plasmas (IP) Plasma Diagnostics(PD) Plasmas and clean environment(PC) There was also a Special Session devoted to the focal theme Plasmas in Nuclear Fuel Cycle (PANFC) Applications in Nuclear Fusion Technology (ANFT) Physics and technology of Processing Plasmas in Nuclear Fuel Cycle (PPNFC). Plasma Technology finds wide applications not only in nuclear, space and defense-related industries but also in medical, nano-technology and semiconductor industries. Plasma technologies have distinguished themselves in terms of compactness, process efficiency, techno economics and innovative possibilities. As we advance into the new technology era, there is a need for evolving strategies to apply the

  16. Space Weather and the Ground-Level Solar Proton Events of the 23rd Solar Cycle

    NASA Astrophysics Data System (ADS)

    Shea, M. A.; Smart, D. F.

    2012-10-01

    Solar proton events can adversely affect space and ground-based systems. Ground-level events are a subset of solar proton events that have a harder spectrum than average solar proton events and are detectable on Earth's surface by cosmic radiation ionization chambers, muon detectors, and neutron monitors. This paper summarizes the space weather effects associated with ground-level solar proton events during the 23rd solar cycle. These effects include communication and navigation systems, spacecraft electronics and operations, space power systems, manned space missions, and commercial aircraft operations. The major effect of ground-level events that affect manned spacecraft operations is increased radiation exposure. The primary effect on commercial aircraft operations is the loss of high frequency communication and, at extreme polar latitudes, an increase in the radiation exposure above that experienced from the background galactic cosmic radiation. Calculations of the maximum potential aircraft polar route exposure for each ground-level event of the 23rd solar cycle are presented. The space weather effects in October and November 2003 are highlighted together with on-going efforts to utilize cosmic ray neutron monitors to predict high energy solar proton events, thus providing an alert so that system operators can possibly make adjustments to vulnerable spacecraft operations and polar aircraft routes.

  17. Proceedings of the 23rd Annual Precise Time and Time Interval (PTTI) Applications and Planning Meeting

    SciTech Connect

    Sydnor, R.L.

    1992-07-01

    A compilation of technical papers, from the 23rd annual Precise Time and Time Interval (PTTI) Applications and Planning Meeting, is presented. Papers were given in the following categories: (1) developments in rubidium, cesium, and hydrogen-based frequency standards, and in cryogenic and trapped-ion technology; (2) international and transnational applications of PTTI technology with emphasis on satellite laser tracking networks, GLONASS timing, comparison of national time scales and international communications; (3) applications of PTTI technology to the telecommunications, power distribution, platform positioning, and geophysical survey industries; (4) applications of PTTI technology to evolving military communications and navigation systems; and (5) dissemination of precise time and frequency by means of GPS, GLONASS, MILSTAR, Loran, and synchronous communications satellites.

  18. Final report: ES11: The 23rd Annual Workshop on Electronic Structure Methods

    SciTech Connect

    Rappe, Andrew M.

    2011-08-31

    ES11: the 23rd Annual Workshop on Electronic Structure Methods was held from June 6-9, 2011 at the University of Pennsylvania. The local organizing committee (see Section II) led by PI Andrew M. Rappe supervised the organization of the conference, before, during, and after the meeting itself. The national organizing committee set the technical program of talks, and provided support and advice in various ways. The conference was well-attended (see Section III). An important feature of this conference was a series of panel discussions (see Section IV) to discuss the field of electronic structure and to set new directions. The technical program was of extraordinarily high quality (see Section V). The host institution, the University of Pennsylvania, provided a supportive environment for this meeting (see Section VI).

  19. CALL Communities & Culture: Short Papers from EUROCALL 2016 (23rd, Limassol, Cyprus, August 24-27, 2016)

    ERIC Educational Resources Information Center

    Papadima-Sophocleous, Salomi, Ed.; Bradley, Linda, Ed.; Thouësny, Sylvie, Ed.

    2016-01-01

    The 23rd EUROCALL conference was held in Cyprus from the 24th to the 27th of August 2016. The theme of the conference this year was "CALL Communities and Culture." It offered a unique opportunity to hear from real-world CALL practitioners on how they practice CALL in their communities, and how the CALL culture has developed in local and…

  20. Proceedings of the 23rd Seismic Research Symposium: Worldwide Monitoring of Nuclear Explosions

    SciTech Connect

    Warren, N. Jill; Chavez, Francesca C.

    2001-10-02

    These proceedings contain papers prepared for the 23rd Seismic Research Review: Worldwide Monitoring of Nuclear Explosions, held 2-5 October, 2001 in Jackson Hole, Wyoming. These papers represent the combined research related to ground-based nuclear explosion monitoring funded by the National Nuclear Security Administration (NNSA), Defense Threat Reduction Agency (DTRA), Air Force Technical Applications Center (AFTAC), the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO), and other invited sponsors. The scientific objectives of the research are to improve the United States capability to detect, locate, and identify nuclear explosions. The purpose of the meeting is to provide the sponsoring agencies, as well as potential users, an opportunity to review research accomplished during the preceding year and to discuss areas of investigation for the coming year. For the researchers, it provides a forum for the exchange of scientific information toward achieving program goals, and an opportunity to discuss results and future plans. Paper topics include: seismic regionalization and calibration; detection and location of sources; wave propagation from source to receiver; the nature of seismic sources, including mining practices; hydroacoustic, infrasound, and radionuclide methods; on-site inspection; and data processing.

  1. Satellite observations of the volcanic plume from the 23rd April 2015 eruption of Calbuco volcano

    NASA Astrophysics Data System (ADS)

    Hayer, Catherine; Carboni, Elisa; Ventress, Lucy; Povey, Adam; Grainger, Roy

    2016-04-01

    Calbuco volcano, Chile, erupted on 23rd April 2015, producing an eruption column reported to reach 17 km. The eruption was captured on the IASI NRT website (http://www.nrt-atmos.cems.rl.ac.uk/). The data were then reprocessed using the iterative optimal estimation retrieval developed by the EODG group at University of Oxford to determine the SO2 atmospheric loading and the altitude of the plume over time. The atmospheric loading was measured as 0.3 - 0.4 Tg of SO2 over the first 2 days. It is thought that the eruption was relatively ash poor, with the majority of the ash falling out within the first couple of days. The retrieved altitude of the plume is consistent with the range initially reported, with the core of the plume reaching 15 - 18 km. When the SO2 plume reached the west coast of South Africa, it was caught in a cyclonic system, causing it to remain in the same region for several days with a highly constrained core. A SO2 depletion rate and conversion time to H2SO4 are calculated from this data. The data from the IASI instruments are compared to CALIOP lidar overpasses as well as data from the MLS & OSIRIS instruments. The HYSPLIT trajectory model is used to investigate the evolution of the plume and to corroborate the altitudes retrieved by IASI.

  2. PREFACE: 23rd European Cosmic Ray Symposium (and 32nd Russian Cosmic Ray Conference)

    NASA Astrophysics Data System (ADS)

    Erlykin, A. D.; Kokoulin, R. P.; Lidvansky, A. S.; Meroshnichenko, L. I.; Panasyuk, M. I.; Panov, A. D.; Wolfendale, A. W.

    2013-02-01

    The 23rd European Cosmic Ray Symposium (ECRS) took place in Moscow at the Lomonosov Moscow State University (3-7 July 2012), and was excellently organized by the Skobeltsyn Institute of Nuclear Physics of the Lomonosov Moscow State University, with the help of the Russian Academy of Sciences and the Council on the Complex Problem of Cosmic Rays of the Russian Academy of Sciences. The first symposia were held in 1968 in Lodz, Poland (high energy, extensive air showers and astrophysical aspects) and in Bern (solar and heliospheric phenomena) and the two 'strands' joined together in 1976 with the meeting in Leeds. Since then the symposia, which have been very successful, have covered all the major topics with some emphasis on European collaborations and on meeting the demands of young scientists. Initially, a driving force was the need to overcome the divisions caused by the 'Cold War' but the symposia continued even when that threat ceased and they have shown no sign of having outlived their usefulness. 2012 has been an important year in the history of cosmic ray studies, in that it marked the centenary of the discovery of enigmatic particles in the perilous balloon ascents of Victor Hess. A number of conferences have taken place in Western Europe during the year, but this one took place in Moscow as a tribute to the successful efforts of many former USSR and other Eastern European scientists in discovering the secrets of the subject, often under very difficult conditions. The symposium covers a wide range of scientific issues divided into the following topics: PCR-IPrimary cosmic rays I (E < 1015 eV) PCR-IIPrimary cosmic rays II (E > 1015 eV) MNCosmic ray muons and neutrinos GAGeV and TeV gamma astronomy SHEnergetic particles in the heliosphere (solar and anomalous CRs and GCR modulation) GEOCosmic rays and geophysics (energetic particles in the atmosphere and magnetosphere of the Earth) On a personal note, as I step down as co-founder and chairman of the

  3. LPHYS'14: 23rd International Laser Physics Workshop (Sofia, Bulgaria, 14-18 July 2014)

    NASA Astrophysics Data System (ADS)

    Yevseyev, Alexander V.

    2014-04-01

    The 23rd annual International Laser Physics Workshop (LPHYS14) will be held from 14 July to 18 July 2014 in the city of Sofia, Bulgaria, at the Ramada Sofia Hotel hosted this year by the Institute of Electronics, Bulgarian Academy of Sciences. LPHYS14 continues a series of workshops that took place in Dubna,1992; Dubna/Volga river tour, 1993; New York, 1994; Moscow/Volga river tour (jointly with NATO SILAP Workshop), 1995; Moscow, 1996; Prague, 1997; Berlin, 1998; Budapest, 1999; Bordeaux, 2000; Moscow, 2001; Bratislava, 2002; Hamburg, 2003; Trieste, 2004; Kyoto, 2005; Lausanne, 2006; Len, 2007; Trondheim, 2008; Barcelona, 2009; Foz do Iguau, 2010; Sarajevo, 2011; Calgary, 2012 and Prague, 2013. The total number of participants this year is expected to be about 400. In the past, annual participation was typically from over 30 countries. 2014 Chairpersons Sanka Gateva (Bulgaria), Pavel Pashinin (Russia) LPHYS14 will offer eight scientific section seminars and one general symposium: Seminar 1 Modern Trends in Laser Physics Seminar 2 Strong Field and Attosecond Physics Seminar 3 Biophotonics Seminar 4 Physics of Lasers Seminar 5 Nonlinear Optics and Spectroscopy Seminar 6 Physics of Cold Trapped Atoms Seminar 7 Quantum Information Science Seminar 8 Fiber Optics Symposium Extreme Light Technologies, Science and Applications Abstract of your presentation A one-page abstract should contain: title; list of all co-authors (the name of the speaker underlined); affiliations; correspondence addresses including phone numbers, fax numbers, e-mail addresses; and the text of the abstract. Abstracts should be sent to the following co-chairs of the scientific seminars and the symposium: Kirill A Prokhorov (Seminar 1) E-mail: cyrpro@gpi.ru Mikhail V Fedorov (Seminar 2) E-mail: fedorov@ran.gpi.ru Sergey A Gonchukov (Seminar 3) E-mail: gonchukov@mephi.ru Ivan A Shcherbakov (Seminar 4) E-mail: gbufetova@lsk.gpi.ru Vladimir A Makarov (Seminar 5) E-mail: makarov@msu.ilc.edu.ru Vyacheslav

  4. PREFACE: 23rd Congress of the International Commission for Optics (ICO 23)

    NASA Astrophysics Data System (ADS)

    Salgueiro, J. R.; Flores-Arias, M. T.; Vázquez-Dorrío, J. B.; Guzmán, Á.; Arakawa, Y.

    2015-04-01

    The 23rd Congress of the International Commission for Optics (ICO) was held in Santiago de Compostela (Spain) 26-29 August 2014, organized by the Universities of Vigo and Santiago de Compostela. Approximately 450 people attended the conference, sharing their knowledge in the cheerful, warm atmosphere of this lovely city. The conference was extremely successful in contributing to the mission of the ICO: to contribute worldwide, on an international basis, to the progress and diffusion of scientific and technological knowledge on optics and photonics. Optics and photonics have reached a critical level of importance for the development of our societies and are present in a great many aspects of our technological progress, from communication systems supporting the Internet to the most modern techniques in medicine. Consistent with the conference slogan Enlightening the Future, the meeting stressed the importance of optical science as a key to technological progress in the coming years. UNESCO's designation of 2015 as the International Year of Light and Light-Based Technologies (www.light2015.org) acknowledges the importance of raising global awareness of how light and light-based technologies are present in a large fraction of today's advances and how they can address challenges in important areas such as energy, education, agriculture, and health. The four-day conference highlighted eleven plenary talks by outstanding scientists working in important areas of optics and photonics. A. Aspect, T. Kippenberg (2013 ICO Prize awardee) and K. Razewski (2013 ICO Galileo Galilei Award) spoke on quantum optics; P. Russell and Yu. Kivshar lectured on topics related to optical processing devices as optical fibers and metamaterials for light shaping; N. X. Fang (2011 ICO Prize), U. Woggon, and A. Alú (2013 IUPAP Young Scientists Prize) discussed applications of optics to nanoscience; and K. Dholakia and J. Widjaja (2008 Galileo Galilei Award) presented in their plenaries

  5. Measurement of polar stratospheric NO2 from the 23rd and 24th Japanese Antarctic Research Expedition (JARE) balloon experiments

    NASA Technical Reports Server (NTRS)

    Shibasaki, K.; Iwagami, N.; Ogawa, T.

    1985-01-01

    As a part of the Japanese activities of MAP in the Antarctica, balloon-borne measurements of the stratospheric NO2 profile were planned and carried out by the JARE 23rd and 24th wintering parties. Few results have been reported so far as the stratospheric NO2 profile at high latitude. There were no reported balloon measurements carried out in the Southern Hemisphere. Profiles are presented for the first balloon-borne measurement of the stratospheric NO2 in the Antarctica. Three balloons named JA21, JA25 and JA26 were launched from Syowa Station (69 deg S, 35.6 deg E) using 5000 cu. cm plastic balloons. JA21 balloon was launched on November 24, 1982, and JA25 and JA26 balloons on November 12 and 20, 1983, respectively.

  6. Influence of the solar UV-radiation intensity on the 630-nm nightglow emission in the 23rd solar cycle

    NASA Astrophysics Data System (ADS)

    Ievenko, I. B.; Alekseev, V. N.; Parnikov, S. G.

    2011-10-01

    It is well known that the 630-nm nightglow emission intensity in midlatitudes increases by more than a factor of 2 during a sunspot maximum. It has been assumed that the phenomenon is caused by variations in solar UV radiation during a solar cycle (Fishkova, 1983). We present the results of photometric measurements of the nightglow 630.0 nm emission intensity at a latitude of 63° E and longitude of 130° E (Yakutsk) in 1990-2007. The dependence of the 630-nm emission intensity on solar activity on magnetically quiet days in the 22nd and 23rd solar cycles is shown. The close relationship between the 630-nm nightglow intensity and the intensity of extreme UV (EUV) with a correlation coefficient of 0.8-0.9 in 1997-2007 is ascertained from the SOHO/SEM data. The dominance of solar EUV in the excitation of nightglow 630-nm emission has thus been experimentally proved.

  7. FOREWORD: 23rd National Symposium on Plasma Science & Technology (PLASMA-2008)

    NASA Astrophysics Data System (ADS)

    Das, A. K.

    2010-01-01

    The Twentieth Century has been a defining period for Plasma Science and Technology. The state of ionized matter, so named by Irving Langmuir in the early part of twentieth century, has now evolved in to a multidisciplinary area with scientists and engineers from various specializations working together to exploit the unique properties of the plasma medium. There have been great improvements in the basic understanding of plasmas as a many body system bound by complex collective Coulomb interactions of charges, atoms, molecules, free radicals and photons. Simultaneously, many advanced plasma based technologies are increasingly being implemented for industrial and societal use. The emergence of the multination collaborative project International Thermonuclear Experimental Reactor (ITER) project has provided the much needed boost to the researchers working on thermonuclear fusion plasmas. In addition, the other plasma applications like MHD converters, hydrogen generation, advanced materials (synthesis, processing and surface modification), environment (waste beneficiation, air and water pollution management), nanotechnology (synthesis, deposition and etching), light production, heating etc are actively being pursued in governmental and industrial sectors. For India, plasma science and technology has traditionally remained an important area of research. It was nearly a century earlier that the Saha ionization relation pioneered the way to interpret experimental data from a vast range of near equilibrium plasmas. Today, Indian research contributions and technology demonstration capabilities encompass thermonuclear fusion devices, nonlinear plasma phenomena, plasma accelerators, beam plasma interactions, dusty and nonneutral plasmas, industrial plasmas and plasma processing of materials, nano synthesis and structuring, astrophysical and space plasmas etc. India's participation in the ITER programme is now reflected in increased interest in the research and development

  8. Teaching of Psychology: Ideas and Innovations. Proceedings of the Annual Conference on Undergraduate Teaching of Psychology (23rd, Tarrytown, New York, March 20-21, 2009)

    ERIC Educational Resources Information Center

    Howell-Carter, Marya, Ed.; Gonder, Jennifer, Ed.

    2009-01-01

    The document is a summary of the conference proceedings for the 23rd Annual Farmingdale State College Teaching of Psychology Conference held on March 20-21, 2009 at the DoubleTree Hotel in Tarrytown, New York. The conference featured a keynote address by Dr. Jeffrey Nevid on Reaching and teaching the millennials: Helping today's students become…

  9. A Mission To Teach: The California State University, Channel Islands. A Review of the Board of Trustees' Proposal To Build a 23rd Campus. Commission Report.

    ERIC Educational Resources Information Center

    California State Postsecondary Education Commission, Sacramento.

    This report reviews the proposal by the California State University (CSU) to establish a 23rd campus to be know as California State University, Channel Islands. The proposed institution will be a full-service campus with a lower division, upper division, and graduate educational services, located in a former state hospital in Ventura County. The…

  10. "Intelligence and Civilisation": A Ludwig Mond Lecture Delivered at the University of Manchester on 23rd October 1936 by Godfrey H. Thomson. A Reprinting with Background and Commentary

    ERIC Educational Resources Information Center

    Deary, Ian J.; Lawn, Martin; Brett, Caroline E.; Bartholomew, David J.

    2009-01-01

    Here we reprint, and provide background and a commentary on, a recently-rediscovered lecture by Godfrey H. Thomson entitled, "Intelligence and civilisation." It was delivered at the University of Manchester, UK, on 23rd October, 1936, printed in 1937 in the short-lived "Journal of the University of Manchester" and as a pamphlet…

  11. Coordinated Research Projects of the IAEA Atomic and Molecular Data Unit

    SciTech Connect

    Braams, B. J.; Chung, H.-K.

    2011-05-11

    The IAEA Atomic and Molecular Data Unit is dedicated to the provision of databases for atomic, molecular and plasma-material interaction (AM/PMI) data that are relevant for nuclear fusion research. IAEA Coordinated Research Projects (CRPs) are the principal mechanism by which the Unit encourages data evaluation and the production of new data. Ongoing and planned CRPs on AM/PMI data are briefly described here.

  12. IAEA safeguards and classified materials

    SciTech Connect

    Pilat, J.F.; Eccleston, G.W.; Fearey, B.L.; Nicholas, N.J.; Tape, J.W.; Kratzer, M.

    1997-11-01

    The international community in the post-Cold War period has suggested that the International Atomic Energy Agency (IAEA) utilize its expertise in support of the arms control and disarmament process in unprecedented ways. The pledges of the US and Russian presidents to place excess defense materials, some of which are classified, under some type of international inspections raises the prospect of using IAEA safeguards approaches for monitoring classified materials. A traditional safeguards approach, based on nuclear material accountancy, would seem unavoidably to reveal classified information. However, further analysis of the IAEA`s safeguards approaches is warranted in order to understand fully the scope and nature of any problems. The issues are complex and difficult, and it is expected that common technical understandings will be essential for their resolution. Accordingly, this paper examines and compares traditional safeguards item accounting of fuel at a nuclear power station (especially spent fuel) with the challenges presented by inspections of classified materials. This analysis is intended to delineate more clearly the problems as well as reveal possible approaches, techniques, and technologies that could allow the adaptation of safeguards to the unprecedented task of inspecting classified materials. It is also hoped that a discussion of these issues can advance ongoing political-technical debates on international inspections of excess classified materials.

  13. Very Bright, Very Hot and Very Long: Swift Observations of the DG CVn "Superflare" of April 23rd, 2014

    NASA Astrophysics Data System (ADS)

    Drake, Stephen Alan; Osten, Rachel A.; Page, Kim L; Kennea, Jamie A; Oates, Samantha R; Krimm, Hans A; Gehrels, Neil; Page, Mathew J; Kowalski, Adam

    2014-08-01

    On April 23rd this year, one of the 2 stars in the close visual binary dM4e system DG CVn flared to a level bright enough 300 milliCrab in the 15-150 keV band) that it triggered the Swift Burst Alert Telescope. Two minutes later, after Swift had slewed to the direction of this source, the Swift X-ray Telescope (XRT) and the Ultraviolet Optical Telescope (UVOT) commenced observing this flare. These observations continued (intermittently) for about 20 days and yielded a fascinating case history of this colossal event, the decay of which took more than a week in the UV and soft X-ray regions, and included several smaller superimposed secondary flares. The peak 0.3-10 keV luminosity observed by the XRT of 1.9e32 erg/s at the 18 pc distance of this system is 1.5 times the 'normal' combined systemic bolometric luminosity of 1.3e32 erg/s, making this event a super-bolometric flare similar to the 2008 flare of EV Lac (also detected by Swift). The BAT and XRT spectra of this flare in the first 6 minutes indicate that the emission was dominated by very hot (>>10 keV) plasma and/or a non-thermal power-law emission. This flare is arguably the longest, most X-ray luminous and hottest flare ever seen for an M dwarf in the solar neighborhood, and is reminiscent of the 9 days long flare of the RS CVn binary CF Tuc detected by ROSAT. We discuss how these exceptional characteristics may be related to the known properties of this system, specifically to its youth (30 Myr) and rapid rotation (55 km/s).

  14. TECHNOLOGY ROADMAPPING FOR IAEA SEALS.

    SciTech Connect

    HOFFHEINS,B.; ANNESE,C.; GOODMAN,M.; OCONNOR,W.; GUSHUE,S.; PEPPER,S.

    2003-07-13

    In the fall of 2002, the U.S. Support Program (USSP) initiated an effort to define a strategy or ''roadmap'' for future seals technologies and to develop a generalized process for planning safeguards equipment development, which includes seals and other safeguards equipment. The underlying objectives of the USSP include becoming more proactive than reactive in addressing safeguards equipment needs, helping the IAEA to maintain an inventory of cost-effective, reliable, and effective safeguards equipment, establishing a long-term planning horizon, and securing IAEA ownership in the process of effective requirements definition and timely transitioning of new or improved systems for IAEA use. At an initial workshop, seals, their functions, performance issues, and future embodiments were discussed in the following order: adhesive seals, metal seals, passive and active loop seals, ultrasonic seals, tamper indicating enclosures (including sample containers, equipment enclosures, and conduits). Suggested improvements to these technologies focused largely on a few themes: (1) The seals must be applied quickly, easily, and correctly; (2) Seals and their associated equipment should not unduly add bulk or weight to the inspectors load; (3) Rapid, in-situ verifiability of seals is desirable; and (4) Seal systems for high risk or high value applications should have two-way, remote communications. Based upon these observations and other insights, the participants constructed a skeletal approach for seals technology planning. The process begins with a top-level review of the fundamental safeguards requirements and extraction of required system features, which is followed by analysis of suitable technologies and identification of technology gaps, and finally by development of a planning schedule for system improvements and new technology integration. Development of a comprehensive procedure will require the partnership and participation of the IAEA. The presentation will include a

  15. Fusion

    NASA Astrophysics Data System (ADS)

    Herman, Robin

    1990-10-01

    The book abounds with fascinating anecdotes about fusion's rocky path: the spurious claim by Argentine dictator Juan Peron in 1951 that his country had built a working fusion reactor, the rush by the United States to drop secrecy and publicize its fusion work as a propaganda offensive after the Russian success with Sputnik; the fortune Penthouse magazine publisher Bob Guccione sank into an unconventional fusion device, the skepticism that met an assertion by two University of Utah chemists in 1989 that they had created "cold fusion" in a bottle. Aimed at a general audience, the book describes the scientific basis of controlled fusion--the fusing of atomic nuclei, under conditions hotter than the sun, to release energy. Using personal recollections of scientists involved, it traces the history of this little-known international race that began during the Cold War in secret laboratories in the United States, Great Britain and the Soviet Union, and evolved into an astonishingly open collaboration between East and West.

  16. Nuclear Fusion Award 2009 speech Nuclear Fusion Award 2009 speech

    NASA Astrophysics Data System (ADS)

    Sabbagh, Steven Anthony

    2011-01-01

    This is an exceptional moment in my career, and so I want to thank all of my teachers, colleagues and mentors who have made this possible. From my co-authors and myself, many thanks to the International Atomic Energy Agency, IOP Publishing, the Nuclear Fusion journal team, and the selection committee for the great honor of receiving this award. Also gratitude to Kikuchi-sensei, not only for the inventive and visionary creation of this award, but also for being a key mentor dating back to his efforts in producing high neutron output in JT-60U. It was also a great honor to receive the award directly from IAEA Deputy Director General Burkart during the 23rd IAEA Fusion Energy Conference in Daejeon. Receiving the award at this venue is particularly exciting as Daejeon is home to the new, next-generation KSTAR tokamak device that will lead key magnetic fusion research areas going forward. I would also like to thank the mayor of Daejeon, Dr Yum Hong-Chul, and all of the meeting organizers for giving us all a truly spectacular and singular welcoming event during which the award was presented. The research leading to the award would not have been possible without the support of the US Department of Energy, and I thank the Department for the continued funding of this research. Special mention must be made to a valuable co-author who is no longer with us, Professor A. Bondeson, who was a significant pioneer in resistive wall mode (RWM) research. I would like to thank my wife, Mary, for her infinite patience and encouragement. Finally, I would like to personally thank all of you that have approached and congratulated me directly. There are no units to measure how important your words have been in this regard. When notified that our paper had been shortlisted for the 2009 Nuclear Fusion Award, my co-authors responded echoing how I felt—honored to be included in such a fine collection of research by colleagues. It was unfathomable—would this paper follow the brilliant work

  17. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false IAEA inspections. 75.8 Section 75.8 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT General... notice from the U.S. Department of State. The applicant, licensee, or certificate holder should...

  18. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false IAEA inspections. 75.8 Section 75.8 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT General... notice from the U.S. Department of State. The applicant, licensee, or certificate holder should...

  19. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false IAEA inspections. 75.8 Section 75.8 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT General... notice from the U.S. Department of State. The applicant, licensee, or certificate holder should...

  20. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false IAEA inspections. 75.8 Section 75.8 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT General... notice from the U.S. Department of State. The applicant, licensee, or certificate holder should...

  1. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false IAEA inspections. 75.8 Section 75.8 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT General... notice from the U.S. Department of State. The applicant, licensee, or certificate holder should...

  2. IAEA Nuclear Data Section: provision of atomic and nuclear databases for user applications.

    PubMed

    Humbert, Denis P; Nichols, Alan L; Schwerer, Otto

    2004-01-01

    The Nuclear Data Section (NDS) of the International Atomic Energy Agency (IAEA) provides a wide range of atomic and nuclear data services to scientists worldwide, with particular emphasis placed on the needs of developing countries. Highly focused Co-ordinated Research Projects and multinational data networks are sponsored under the auspices of the IAEA for the development and assembly of databases through the organised participation of specialists from Member States. More than 100 data libraries are readily available cost-free through the Internet, CD-ROM and other media. These databases are used in a wide range of applications, including fission- and fusion-energy, non-energy applications and basic research studies. Further information concerning the various services can be found through the web address of the IAEA Nuclear Data Section: and a mirror site at IPEN, Brazil that is maintained by NDS staff:.

  3. EDITORIAL: Special issue: overview reports from the Fusion Energy Conference (FEC) (Daejeon, South Korea, 2010) Special issue: overview reports from the Fusion Energy Conference (FEC) (Daejeon, South Korea, 2010)

    NASA Astrophysics Data System (ADS)

    Thomas, Paul

    2011-09-01

    The group of 27 papers published in this special issue of Nuclear Fusion aims to monitor the worldwide progress made in the period 2008-2010 in the field of thermonuclear fusion. Of these papers, 22 are based on overview reports presented at the 23rd Fusion Energy Conference (FEC 2010) and five are summary reports. The conference was hosted by the Republic of Korea and organized by the IAEA in cooperation with the National Fusion Research Institute and the Daejeon Metropolitan City. It took place in Daejeon on 11-16 October 2010. The overviews presented at the conference have been rewritten and extended for the purpose of this special issue and submitted to the standard double-referee peer-review of Nuclear Fusion. The articles are placed in the following sequence: Conference summaries of the sessions devoted to: Tokamak and stellarator experiments, experimental divertor physics and plasma wall interaction experiments, stability experiments and waves and fast particles; ITER activities, fusion technology, safety and economics; Magnetic confinement theory and modelling; Inertial confinement fusion; Innovative confinement concepts, operational scenarios and confinement. Overview articles, presented in programme order, are as follows: Tokamaks Overview of KSTAR initial experiments; Recent progress in RF heating and long-pulse experiments on EAST; Overview of JET results; DIII-D contributions toward the scientific basis for sustained burning plasmas; Overview of JT-60U results toward the resolution of key physics and engineering issues in ITER and JT-60SA; Overview of physics results from NSTX; Overview of ASDEX Upgrade results; Overview of physics results from MAST; Contribution of Tore Supra in preparation of ITER; Overview of FTU results; Overview of experimental results on the HL-2A tokamak; Progress and scientific results in the TCV tokamak; Overview of the JT-60SA project; Recent results of the T-10 tokamak; The reconstruction and research progress of the TEXT

  4. Selected papers from the 23rd MicroMechanics and Microsystems Europe Workshop (MME 2012) (Ilmenau, Germany, September 9-12, 2012)

    NASA Astrophysics Data System (ADS)

    Hoffmann, Martin

    2013-07-01

    In September 2012, the 23rd MicroMechanics Europe Workshop (MME) took place in Ilmenau, Germany. With about 120 participants from 20 countries and 76 accepted presentations, the workshop series turned out to be a successful platform for young scientists to present their work to our scientific community. Traditionally, the interaction is an important aspect of this workshop: while short presentations introduce the posters, an extended poster session allows intensive discussion which is quite useful to the participants. The discussion very often extends into the breaks and the evening events. It is also encouraging for them that the best presentations are selected and invited to submit a full paper to this journal. Thanks to the support of IOP Publishing, this next logical step to present work to the scientific world is made possible. In this issue, you can find the best papers that have been selected by a committee during the workshop taking the written workshop contribution, the poster and the presentation into account. Again, all areas of micromechanics from new technology developments up to systems integration were presented at the workshop at different levels of completion. The selected papers present those results which are almost complete. Nevertheless, it is nice to see that in some cases topics grow over the years from 'nice ideas' to realized system concepts. And although this is the 23rd workshop, it is clear that micromechanics is a topic that is not running short of new ideas. First, I would like to thank the authors of the selected papers for each of their individual excellent contributions. My gratitude also goes to my fellow members in the programme committee (Per Ohlckers, Martin Hill and Sami Franssila) for their cooperation in the selection of invited speakers and submitted papers, as well as the anonymous Journal of Micromechanics and Microengineering (JMM) reviewers for their careful selection of the final papers presented here. Last, but not

  5. Philosophy of Education, 1974-1975. Proceedings of the Annual Meeting of the Far Western Philosophy of Education Society (23rd, Long Beach, California, December 6-7, 1974).

    ERIC Educational Resources Information Center

    Jelinek, James J., Ed.

    The proceedings of the 23rd annual meeting of the Far Western Philosophy of Education Society in 1974 are presented. The proceedings consist of 16 addresses. Titles include (1) Leonard Abraham Fels, 1911-1974: A Memoriale; (2) Trying to Make Sense out of "Existential Thought and Education"; (3) Making Sense out of "Existential Thought and…

  6. Mathematics Education beyond 2000: Proceedings of the Annual Meeting of the Mathematics Education Research Group of Australasia (23rd, Fremantle, Western Australia, Australia, July 5-9, 2000). Volume 1 [and] Volume 2.

    ERIC Educational Resources Information Center

    Bana, Jack, Ed.; Chapman, Anne, Ed.

    This document contains Volumes 1 and 2 of the proceedings of the 23rd annual conference of the Mathematics Education Research Group of Australasia Incorporated (MERGA) held at Fremantle, Western Australia, July 5-9, 2000. Papers in Volume 1 include: (1) "Bridging Practices: Intertwining Content and Pedagogy in Teaching and Learning To Teach"…

  7. IAEA Safeguards: Past, Present, and Future

    SciTech Connect

    Santi, Peter A.; Hypes, Philip A.

    2012-06-14

    This talk will present an overview of the International Atomic Energy Agency with a specific focus on its international safeguards mission and activities. The talk will first present a brief history of the IAEA and discuss its current governing structure. It will then focus on the Safeguards Department and its role in providing assurance that nuclear materials are being used for peaceful purposes. It will then look at how the IAEA is currently evolving the way in which it executes its safeguards mission with a focus on the idea of a state-level approach.

  8. PREFACE: Third IAEA Technical Meeting on ECRH Physics and Technology in ITER

    NASA Astrophysics Data System (ADS)

    Cirant, S.

    2005-01-01

    This meeting belongs to a series of topical events which the International Atomic Energy Agency (IAEA, Vienna) organizes in a regular basis on crucial aspects of nuclear fusion research, or related in particular to ITER physics or a technological application relevant to the nuclear fusion reactor. Each Technical Meeting series has a specific object; the events are called on a two-three years basis and are recommended by the IAEA advisory body for Fusion, the International Fusion Research Council (IFRC) . The object of the IAEA-TM held in Como, Italy, 2-5 May 2005, was the application in ITER of powerful Electron Cyclotron waves in the millimeter wave frequency range for plasma Heating and noninductive Current Drive. The meeting was the third on this subject. There were 42 presentations to an audience of about 60 delegates from 16 countries. The main goal of this series of IAEA-TM is to bring together specialists of the different branches involved in the project, in the effort of the best understanding of the limits and capabilities of each one of the different fields of research and development. Millimeter-wave source developers, millimeter-wave system designers and plasma physicists, theoreticians and experimentalists in all of the fields, exposed their way of addressing the problem in plenary sessions attended by all participants. Discussions on the different topics of gyrotron development, launcher options and physics application were continued in forums following the presentations. The specialist reader will find in this volume in particular the latest developments concerning the frequency, the output power and the efficiency of the gyrotrons which are now being considered the preferred type of high power millimeter wave generators for ECH/ECCD applications in the fusion reactor. The debate on the launcher of the EC waves, in the form of Gaussian beams, is presently very active, with a few options on the table to be merged in one optimized and integrated design

  9. 10 CFR 75.7 - Notification of IAEA safeguards.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Notification of IAEA safeguards. 75.7 Section 75.7 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT General Provisions § 75.7 Notification of IAEA safeguards. (a) The licensee must inform the...

  10. 10 CFR 75.7 - Notification of IAEA safeguards.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Notification of IAEA safeguards. 75.7 Section 75.7 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT General Provisions § 75.7 Notification of IAEA safeguards. (a) The licensee must inform the...

  11. 10 CFR 75.12 - Communication of information to IAEA.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Communication of information to IAEA. 75.12 Section 75.12 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT Facility and Location Information § 75.12 Communication of information to IAEA. (a) Except...

  12. 10 CFR 75.7 - Notification of IAEA safeguards.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Notification of IAEA safeguards. 75.7 Section 75.7 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT General Provisions § 75.7 Notification of IAEA safeguards. (a) The licensee must inform the...

  13. 10 CFR 75.7 - Notification of IAEA safeguards.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Notification of IAEA safeguards. 75.7 Section 75.7 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT General Provisions § 75.7 Notification of IAEA safeguards. (a) The licensee must inform the...

  14. 10 CFR 75.7 - Notification of IAEA safeguards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Notification of IAEA safeguards. 75.7 Section 75.7 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT General Provisions § 75.7 Notification of IAEA safeguards. (a) The licensee must inform the...

  15. 10 CFR 75.12 - Communication of information to IAEA.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Communication of information to IAEA. 75.12 Section 75.12 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT Facility and Location Information § 75.12 Communication of information to IAEA. (a) Except...

  16. 10 CFR 75.12 - Communication of information to IAEA.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Communication of information to IAEA. 75.12 Section 75.12 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT Facility and Location Information § 75.12 Communication of information to IAEA. (a) Except...

  17. 10 CFR 75.12 - Communication of information to IAEA.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Communication of information to IAEA. 75.12 Section 75.12 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) SAFEGUARDS ON NUCLEAR MATERIAL-IMPLEMENTATION OF US/IAEA AGREEMENT Facility and Location Information § 75.12 Communication of information to IAEA. (a) Except...

  18. IBC’s 23rd Annual Antibody Engineering, 10th Annual Antibody Therapeutics International Conferences and the 2012 Annual Meeting of The Antibody Society

    PubMed Central

    Klöhn, Peter-Christian; Wuellner, Ulrich; Zizlsperger, Nora; Zhou, Yu; Tavares, Daniel; Berger, Sven; Zettlitz, Kirstin A.; Proetzel, Gabriele; Yong, May; Begent, Richard H.J.; Reichert, Janice M

    2013-01-01

    The 23rd Annual Antibody Engineering, 10th Annual Antibody Therapeutics international conferences, and the 2012 Annual Meeting of The Antibody Society, organized by IBC Life Sciences with contributions from The Antibody Society and two Scientific Advisory Boards, were held December 3–6, 2012 in San Diego, CA. The meeting drew over 800 participants who attended sessions on a wide variety of topics relevant to antibody research and development. As a prelude to the main events, a pre-conference workshop held on December 2, 2012 focused on intellectual property issues that impact antibody engineering. The Antibody Engineering Conference was composed of six sessions held December 3–5, 2012: (1) From Receptor Biology to Therapy; (2) Antibodies in a Complex Environment; (3) Antibody Targeted CNS Therapy: Beyond the Blood Brain Barrier; (4) Deep Sequencing in B Cell Biology and Antibody Libraries; (5) Systems Medicine in the Development of Antibody Therapies/Systematic Validation of Novel Antibody Targets; and (6) Antibody Activity and Animal Models. The Antibody Therapeutics conference comprised four sessions held December 4–5, 2012: (1) Clinical and Preclinical Updates of Antibody-Drug Conjugates; (2) Multifunctional Antibodies and Antibody Combinations: Clinical Focus; (3) Development Status of Immunomodulatory Therapeutic Antibodies; and (4) Modulating the Half-Life of Antibody Therapeutics. The Antibody Society’s special session on applications for recording and sharing data based on GIATE was held on December 5, 2012, and the conferences concluded with two combined sessions on December 5–6, 2012: (1) Development Status of Early Stage Therapeutic Antibodies; and (2) Immunomodulatory Antibodies for Cancer Therapy. PMID:23575266

  19. EDITORIAL: Special issue containing papers presented at the 4th IAEA Technical Meeting on the Theory of Plasma Instabilities Special issue containing papers presented at the 4th IAEA Technical Meeting on the Theory of Plasma Instabilities

    NASA Astrophysics Data System (ADS)

    Itoh, K.; Wilson, H. R.

    2010-05-01

    The 4th IAEA technical meeting (TM) on the Theory of Plasma Instabilities was held in Kyoto, May 18th--20th 2009, following the first (Seeon), second (Trieste) and third (York) meetings in this series. This IAEA-TM was motivated by the recent advances in theoretical methodology, the rapid progress in observations of laboratory and astrophysical plasmas and the evolution of fusion research as we approach the ITER era. The international advisory committee (IAC) and local organizing committee (LOC), the members of which are listed below, collaborated to define the scope and the content of the scientific programme. Young scientists were actively encouraged to participate in this TM to help stimulate their future research careers and raise their international profiles. Through these young scientists, the IAEA-TM planned to identify the future directions of research. About 90 researchers, from 13 countries and the IAEA, participated in this IAEA-TM, with 72 scientific presentations. The talks and posters generated enthusiastic discussions, contributing to the vibrancy of the meeting. This special issue of Nuclear Fusion consists of a cluster of papers, reporting some of the main contributions to the IAEA-TM. The articles in this cluster are representative of the scientific width of presentations at the meeting, spanning topics from micro-turbulence to large-scale MHD dynamics and from transport to detailed analysis of diagnostics. They demonstrate the quality and depth of the research presented at the conference. List of IAC (alphabetical order): B. Breizman (USA), S. Guenter (Germany), T. S. Hahm (USA), K. Itoh (Japan, Chair of 2009), Ya. I. Kolesnichenko (Ukraine), A. G. Peeters (UK), H. Wilson (UK) List of LOC (alphabetical order): A. Fukuyama, R. Horiuchi, S.-I. Itoh, N. Kasuya, Y. Kishimoto (co-chair), K. Kusano, J. Li, K. Mima, S. Murakami, H. Naitou, N. Nakajima, Y. Nakamura, H. Ohtani, S. Okamura, T. Ozeki, S. Sudo (co-chair), H. Sugama, Y. Todo, S. Tokuda, S

  20. Kiloelectronvolt X-rays Emitted from the Earth's Atmosphere During the Peak and Descending Phases of the 23rd Solar Activity Cycle

    NASA Astrophysics Data System (ADS)

    Spjeldvik, Walther; Gusev, Anatoly; Pugacheva, Galina; Martin, Inacio

    We have studied long-term observations of the low-energy, 3 to 8 keV, X-ray emission during the period July 2001 through December 2005. The data were obtained with CadmiumTelluride (CdTe) solid state detectors flown on the LEO CORONAS-F satellite and used to assess the dynamics of X-ray fluxes radiated by the Earth’s upper atmosphere during the peak and declining phases of the 23rd solar cycle as observed within the shadowed segments of the spacecraft trajectory. We present empirical maps of near-global distributions soft X-ray luminescence with data emphasis on northern hemisphere summer and winter conditions. These observations reveal some irregularities, and the maximum X-ray photon energy does not exceed about 8 keV. We found that the X-rays exhibit seasonal variations in addition to the expected dependence on solar activity levels, and there are definite latitudinal and longitudinal patterns. In year 2001, during the solar maximum activity, the 3 to 8 keV X-ray flux reached a maximum of 170 photons/(cm2 s sr) in the geographic northwestern part of the Earth. The luminosity of the brightest soft X-ray atmospheric emission spot was about 40 kW integrated over an upward atmospheric emission geographic area of 200º longitude and 20º latitude as seem at altitude of about 500 km. For comparison, typical auroral emissions in this soft X-ray band is around 10 to 30 MW. We argue that these X-ray fluxes cannot be scattered solar X-rays since solar X-rays are most often lower in photon energy (< 2 keV) and also lower in intensity -- except in short-lived events. We interpret our observations as being due to Bremsstrahlung X-rays resulting from magnetospheric electrons precipitating into the atmosphere from the radiation belts and depositing their kinetic energy there, an energetic electron precipitation flux that is modulated by electromagnetic disturbances such as magnetospheric ELF waves during and following magnetic storms and substorms, terrestrial lightning

  1. IBC's 23rd Antibody Engineering and 10th Antibody Therapeutics Conferences and the Annual Meeting of The Antibody Society: December 2-6, 2012, San Diego, CA.

    PubMed

    Marquardt, John; Begent, Richard H J; Chester, Kerry; Huston, James S; Bradbury, Andrew; Scott, Jamie K; Thorpe, Philip E; Veldman, Trudi; Reichert, Janice M; Weiner, Louis M

    2012-01-01

    Now in its 23rd and 10th years, respectively, the Antibody Engineering and Antibody Therapeutics conferences are the Annual Meeting of The Antibody Society. The scientific program covers the full spectrum of challenges in antibody research and development from basic science through clinical development. In this preview of the conferences, the chairs provide their thoughts on sessions that will allow participants to track emerging trends in (1) the development of next-generation immunomodulatory antibodies; (2) the complexity of the environment in which antibodies must function; (3) antibody-targeted central nervous system (CNS) therapies that cross the blood brain barrier; (4) the extension of antibody half-life for improved efficacy and pharmacokinetics (PK)/pharmacodynamics (PD); and (5) the application of next generation DNA sequencing to accelerate antibody research. A pre-conference workshop on Sunday, December 2, 2012 will update participants on recent intellectual property (IP) law changes that affect antibody research, including biosimilar legislation, the America Invents Act and recent court cases. Keynote presentations will be given by Andreas Plückthun (University of Zürich), who will speak on engineering receptor ligands with powerful cellular responses; Gregory Friberg (Amgen Inc.), who will provide clinical updates of bispecific antibodies; James D. Marks (University of California, San Francisco), who will discuss a systems approach to generating tumor targeting antibodies; Dario Neri (Swiss Federal Institute of Technology Zürich), who will speak about delivering immune modulators at the sites of disease; William M. Pardridge (University of California, Los Angeles), who will discuss delivery across the blood-brain barrier; and Peter Senter (Seattle Genetics, Inc.), who will present his vision for the future of antibody-drug conjugates. For more information on these meetings or to register to attend, please visit www

  2. Recent Data Generation Activities at the Atomic and Molecular Data Unit of the IAEA

    SciTech Connect

    Clark, R.E.H.; Humbert, D.

    2005-05-27

    The main data generation mechanism of the Atomic and Molecular (A+M) Data Unit of the IAEA is the Co-ordinated Research Project (CRP). The International Fusion Research Council Subcommittee on Atomic and Molecular Data for Fusion recommends topics for new CRPs to be initiated by the A+M Unit. A typical CRP has a lifetime of three to five years. At the start of the CRP a Research Co-ordination Meeting (RCM) is held with the purpose of formulating a detailed work plan. At later RCMs progress on these work plans is reported and the studies debated and expanded. At the conclusion of the CRP the results are compiled in a volume of the journal Atomic and Plasma-Material Interaction Data for Fusion. Numerical results are also added to the electronic database as appropriate. Normally the Unit has three to four active CRPs, and also holds Technical Meetings and invites individual Consultants to IAEA Headquarters, Vienna for specific tasks. Such activities can result in providing advice on a particular topic, on data for a particular process, or a new capability to be made widely available. Recently, consultants to the Unit have provided extensive additions to the Unit databases, as well as interfaces to run several calculational tools through the Internet. Specific examples will be presented.

  3. Strengthening IAEA Safeguards for Research Reactors

    SciTech Connect

    Reid, Bruce D.; Anzelon, George A.; Budlong-Sylvester, Kory

    2016-09-01

    During their December 10-11, 2013, workshop in Grenoble France, which focused on the history and future of safeguarding research reactors, the United States, France and the United Kingdom (UK) agreed to conduct a joint study exploring ways to strengthen the IAEA’s safeguards approach for declared research reactors. This decision was prompted by concerns about: 1) historical cases of non-compliance involving misuse (including the use of non-nuclear materials for production of neutron generators for weapons) and diversion that were discovered, in many cases, long after the violations took place and as part of broader pattern of undeclared activities in half a dozen countries; 2) the fact that, under the Safeguards Criteria, the IAEA inspects some reactors (e.g., those with power levels under 25 MWt) less than once per year; 3) the long-standing precedent of States using heavy water research reactors (HWRR) to produce plutonium for weapons programs; 4) the use of HEU fuel in some research reactors; and 5) various technical characteristics common to some types of research reactors that could provide an opportunity for potential proliferators to misuse the facility or divert material with low probability of detection by the IAEA. In some research reactors it is difficult to detect diversion or undeclared irradiation. In addition, infrastructure associated with research reactors could pose a safeguards challenge. To strengthen the effectiveness of safeguards at the State level, this paper advocates that the IAEA consider ways to focus additional attention and broaden its safeguards toolbox for research reactors. This increase in focus on the research reactors could begin with the recognition that the research reactor (of any size) could be a common path element on a large number of technically plausible pathways that must be considered when performing acquisition pathway analysis (APA) for developing a State Level Approach (SLA) and Annual Implementation Plan (AIP). To

  4. 10 CFR 75.12 - Communication of information to IAEA.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGREEMENT Facility and Location Information § 75.12 Communication of information to IAEA. (a) Except as... Commission terminates the license or certificate for each facility or location involved with the request, or... determine a location where the information will remain readily available for examination by the IAEA...

  5. Reference dosimeter system of the iaea

    NASA Astrophysics Data System (ADS)

    Mehta, Kishor; Girzikowsky, Reinhard

    1995-09-01

    Quality assurance programmes must be in operation at radiation processing facilities to satisfy national and international Standards. Since dosimetry has a vital function in these QA programmes, it is imperative that the dosimetry systems in use at these facilities are well calibrated with a traceability to a Primary Standard Dosimetry Laboratory. As a service to the Member States, the International Atomic Energy Agency operates the International Dose Assurance Service (IDAS) to assist in this process. The transfer standard dosimetry system that is used for this service is based on ESR spectrometry. The paper describes the activities undertaken at the IAEA Dosimetry Laboratory to establish the QA programme for its reference dosimetry system. There are four key elements of such a programme: quality assurance manual; calibration that is traceable to a Primary Standard Dosimetry Laboratory; a clear and detailed statement of uncertainty in the dose measurement; and, periodic quality audit.

  6. Databases and coordinated research projects at the IAEA on atomic processes in plasmas

    NASA Astrophysics Data System (ADS)

    Braams, Bastiaan J.; Chung, Hyun-Kyung

    2012-05-01

    The Atomic and Molecular Data Unit at the IAEA works with a network of national data centres to encourage and coordinate production and dissemination of fundamental data for atomic, molecular and plasma-material interaction (A+M/PMI) processes that are relevant to the realization of fusion energy. The Unit maintains numerical and bibliographical databases and has started a Wiki-style knowledge base. The Unit also contributes to A+M database interface standards and provides a search engine that offers a common interface to multiple numerical A+M/PMI databases. Coordinated Research Projects (CRPs) bring together fusion energy researchers and atomic, molecular and surface physicists for joint work towards the development of new data and new methods. The databases and current CRPs on A+M/PMI processes are briefly described here.

  7. Databases and coordinated research projects at the IAEA on atomic processes in plasmas

    SciTech Connect

    Braams, Bastiaan J.; Chung, Hyun-Kyung

    2012-05-25

    The Atomic and Molecular Data Unit at the IAEA works with a network of national data centres to encourage and coordinate production and dissemination of fundamental data for atomic, molecular and plasma-material interaction (A+M/PMI) processes that are relevant to the realization of fusion energy. The Unit maintains numerical and bibliographical databases and has started a Wiki-style knowledge base. The Unit also contributes to A+M database interface standards and provides a search engine that offers a common interface to multiple numerical A+M/PMI databases. Coordinated Research Projects (CRPs) bring together fusion energy researchers and atomic, molecular and surface physicists for joint work towards the development of new data and new methods. The databases and current CRPs on A+M/PMI processes are briefly described here.

  8. United States Program for Technical assistance to IAEA Standards. Concept Paper: Knowledge Acquisition, Skills training for enhanced IAEA safeguards inspections

    SciTech Connect

    Morris, F.A.; Toquam, J.L.

    1993-11-01

    This concept paper explores the potential contribution of ``Knowledge Acquisition Skills`` in enhancing the effectiveness of international safeguards inspections by the International Atomic energy Agency (IAEA, or Agency) and identifies types of training that could be provided to develop or improve such skills. For purposes of this concept paper, Knowledge Acquisition Skills are defined broadly to include all appropriate techniques that IAEA safeguards inspectors can use to acquire and analyze information relevant to the performance of successful safeguards inspections. These techniques include a range of cognitive, analytic, judgmental, interpersonal, and communications skills that have the potential to help IAEA safeguards inspectors function more effectively.

  9. Nonproliferation, Disarmament, and the IAEA in Tomorrow's World

    SciTech Connect

    Cooley, Jill

    2008-09-08

    International Atomic Energy Agency (IAEA) safeguards have evolved considerably during the last five decades and have become an integral part of the international non-proliferation regime and the global security system. To carry on serving well the international community, they need to continue to move with the times -- especially in light of the renewed interest in nuclear energy and its projected expansion in the coming years, which could bring additional nuclear facilities, material and activities under IAEA safeguards. The projected nuclear ˜renaissance" may pose increased proliferation risks as nuclear material, technology and know-how spread in an increasingly globalized world. The presentation will provide an overview of the IAEA safeguards system and describe current verification challenges and potential new IAEA roles.

  10. Certified reference materials for radionuclides in Bikini Atoll sediment (IAEA-410) and Pacific Ocean sediment (IAEA-412).

    PubMed

    Pham, M K; van Beek, P; Carvalho, F P; Chamizo, E; Degering, D; Engeler, C; Gascó, C; Gurriaran, R; Hanley, O; Harms, A V; Herrmann, J; Hult, M; Ikeuchi, Y; Ilchmann, C; Kanisch, G; Kis-Benedek, G; Kloster, M; Laubenstein, M; Llaurado, M; Mas, J L; Nakano, M; Nielsen, S P; Osvath, I; Povinec, P P; Rieth, U; Schikowski, J; Smedley, P A; Suplinska, M; Sýkora, I; Tarjan, S; Varga, B; Vasileva, E; Zalewska, T; Zhou, W

    2016-03-01

    The preparation and characterization of certified reference materials (CRMs) for radionuclide content in sediments collected offshore of Bikini Atoll (IAEA-410) and in the open northwest Pacific Ocean (IAEA-412) are described and the results of the certification process are presented. The certified radionuclides include: (40)K, (210)Pb ((210)Po), (226)Ra, (228)Ra, (228)Th, (232)Th, (234)U, (238)U, (239)Pu, (239+240)Pu and (241)Am for IAEA-410 and (40)K, (137)Cs, (210)Pb ((210)Po), (226)Ra, (228)Ra, (228)Th, (232)Th, (235)U, (238)U, (239)Pu, (240)Pu and (239+240)Pu for IAEA-412. The CRMs can be used for quality assurance and quality control purposes in the analysis of radionuclides in sediments, for development and validation of analytical methods and for staff training.

  11. IAEA support to medical physics in nuclear medicine.

    PubMed

    Meghzifene, Ahmed; Sgouros, George

    2013-05-01

    Through its programmatic efforts and its publications, the International Atomic Energy Agency (IAEA) has helped define the role and responsibilities of the nuclear medicine physicist in the practice of nuclear medicine. This paper describes the initiatives that the IAEA has undertaken to support medical physics in nuclear medicine. In 1984, the IAEA provided guidance on how to ensure that the equipment used for detecting, imaging, and quantifying radioactivity is functioning properly (Technical Document [TECDOC]-137, "Quality Control of Nuclear Medicine Instruments"). An updated version of IAEA-TECDOC-137 was issued in 1991 as IAEA-TECDOC-602, and this included new chapters on scanner-computer systems and single-photon emission computed tomography systems. Nuclear medicine physics was introduced as a part of a project on radiation imaging and radioactivity measurements in the 2002-2003 IAEA biennium program in Dosimetry and Medical Radiation Physics. Ten years later, IAEA activities in this field have expanded to cover quality assurance (QA) and quality control (QC) of nuclear medicine equipment, education and clinical training, professional recognition of the role of medical physicists in nuclear medicine physics, and finally, the coordination of research and development activities in internal dosimetry. As a result of these activities, the IAEA has received numerous requests to support the development and implementation of QA or QC programs for radioactivity measurements in nuclear medicine in many Member States. During the last 5 years, support was provided to 20 Member States through the IAEA's technical cooperation programme. The IAEA has also supported education and clinical training of medical physicists. This type of support has been essential for the development and expansion of the Medical Physics profession, especially in low- and middle-income countries. The need for basic as well as specialized clinical training in medical physics was identified as a

  12. Genes, brain, and behavior: development gone awry in autism? A report on the 23rd Annual International Symposium of the Center for the Study of Gene Structure and Function.

    PubMed

    Lewis, Michael J; Dictenberg, Jason B

    2010-09-01

    Autism and its highly variable symptomology were the themes of the 23rd Annual International Symposium of the Center for the Study of Gene Structure and Function at Hunter College in New York City, held 15 January 2010. The meeting explored the extensive research on autism from several perspectives-integrating research on genetics, neuroscience, and behavior-from researchers presenting new and innovative approaches to understanding the autism spectrum. Early diagnosis, intervention, and genetics were major themes because they are seen as essential areas in which progress is needed before the rise in numbers of cases of autism throughout the world, which some describe as approaching an epidemic, can be stemmed. Several genetic, neurobiological, and behavioral markers of autism have been identified that may ultimately provide the basis for early identification, and that presently define the key areas requiring intensive intervention.

  13. Recommended observational skills training for IAEA safeguards inspections. Final report: Recommended observational skills training for IAEA safeguards inspections

    SciTech Connect

    Toquam, J.L.; Morris, F.A.

    1994-09-01

    This is the second of two reports prepared to assist the International Atomic Energy Agency (IAEA or Agency) in enhancing the effectiveness of its international safeguards inspections through inspector training in {open_quotes}Observational Skills{close_quotes}. The first (Phase 1) report was essentially exploratory. It defined Observational Skills broadly to include all appropriate cognitive, communications, and interpersonal techniques that have the potential to help IAEA safeguards inspectors function more effectively. It identified 10 specific Observational Skills components, analyzed their relevance to IAEA safeguards inspections, and reviewed a variety of inspection programs in the public and private sectors that provide training in one or more of these components. The report concluded that while it should be possible to draw upon these other programs in developing Observational Skills training for IAEA inspectors, the approaches utilized in these programs will likely require significant adaption to support the specific job requirements, policies, and practices that define the IAEA inspector`s job. The overall objective of this second (Phase 2) report is to provide a basis for the actual design and delivery of Observational Skills training to IAEA inspectors. The more specific purposes of this report are to convey a fuller understanding of the potential application of Observational Skills to the inspector`s job, describe inspector perspectives on the relevance and importance of particular Observational Skills, identify the specific Observational Skill components that are most important and relevant to enhancing safeguards inspections, and make recommendations as to Observational Skills training for the IAEA`s consideration in further developing its Safeguards training program.

  14. 2015 Nuclear Fusion Prize acceptance speech

    SciTech Connect

    Goldston, R. J.

    2016-12-19

    This is the 2015 Nuclear Fusion Prize acceptance speech of R.J. Goldston: It is a great pleasure to receive the 2015 Nuclear Fusion award for my work developing a heuristic drift-based model for the power scrape-off width in tokamaks. I was particularly pleased to receive the award from IAEA Director General Yukiya Amano, whose thoughtful leadership has advanced the cause of nuclear non-proliferation mightily.

  15. Is there hope for fusion

    SciTech Connect

    Fowler, T.K. . Dept. of Nuclear Engineering)

    1990-04-12

    From the outset in the 1950's, fusion research has been motivated by environmental concerns as well as long-term fuel supply issues. Compared to fossil fuels both fusion and fission would produce essentially zero emissions to the atmosphere. Compared to fission, fusion reactors should offer high demonstrability of public protection from accidents and a substantial amelioration of the radioactive waste problem. Fusion still requires lengthy development, the earliest commercial deployment being likely to occur around 2025--2050. However, steady scientific progress is being made and there is a wide consensus that it is time to plan large-scale engineering development. A major international effort, called the International Thermonuclear Experimental Reactor (ITER), is being carried out under IAEA auspices to design the world's first fusion engineering test reactor, which could be constructed in the 1990's. 4 figs., 3 tabs.

  16. USSP-IAEA WORKSHOP ON ADVANCED SENSORS FOR SAFEGUARDS.

    SciTech Connect

    PEPPER,S.; QUEIROLO, A.; ZENDEL, M.; WHICHELLO, J.; ANNESE, C.; GRIEBE, J.; GRIEBE, R.

    2007-11-13

    The IAEA Medium Term Strategy (2006-2011) defines a number of specific goals in respect to the IAEA's ability to provide assurances to the international community regarding the peaceful use of nuclear energy through States adherences to their respective non-proliferation treaty commitments. The IAEA has long used and still needs the best possible sensors to detect and measure nuclear material. The Department of Safeguards, recognizing the importance of safeguards-oriented R&D, especially targeting improved detection capabilities for undeclared facilities, materials and activities, initiated a number of activities in early 2005. The initiatives included letters to Member State Support Programs (MSSPs), personal contacts with known technology holders, topical meetings, consultant reviews of safeguards technology, and special workshops to identify new and novel technologies and methodologies. In support of this objective, the United States Support Program to IAEA Safeguards hosted a workshop on ''Advanced Sensors for Safeguards'' in Santa Fe, New Mexico, from April 23-27, 2007. The Organizational Analysis Corporation, a U.S.-based management consulting firm, organized and facilitated the workshop. The workshop's goal was to help the IAEA identify and plan for new sensors for safeguards implementation. The workshop, which was attended by representatives of seven member states and international organizations, included presentations by technology holders and developers on new technologies thought to have relevance to international safeguards, but not yet in use by the IAEA. The presentations were followed by facilitated breakout sessions where the participants considered two scenarios typical of what IAEA inspectors might face in the field. One scenario focused on an enrichment plant; the other scenario focused on a research reactor. The participants brainstormed using the technologies presented by the participants and other technologies known to them to propose

  17. The IAEA CRP on Studies of Advanced Reactor Technology Options for Effective Incineration of Radioactive Waste

    SciTech Connect

    Maschek, W.; Chen, X.; Rineiski, A.; Schikorr, M.; Stanculescu, A.; Arien, B.; Malambu, E.; Bai, Y.; Li, J.; Wu, Y.; Zheng, S.; Chabert, C.; Peneliau, Y.; Chebeskov, A.; Dekoussar, V.; Vorotyntsev, M.; da Cruz, D.F.; Devan, K.; Gopalakrishnan, V.; Harish, R.; Mohanakrishnan, P.; Pandikumar, G.; Dulla, S.; Ravetto, P.; Feynberg, O.; Ignatiev, V.; Subbotin, V.; Surenkov, A.; Zakirov, R.; Kophazi, J.; Szieberth, M.; Morita, K.; Srivenkatesan, R.; Taczanowski, S.; Tucek, K.; Wider, H.; Vertes, P.; Uhlir, J.

    2007-07-01

    In 2003, the IAEA has initiated the Coordinated Research Project (CRP) on 'Studies of Advanced Reactor Technology Options for Effective Incineration of Radioactive Waste'. The overall objective of the CRP, performed within the framework of IAEA's Nuclear Energy Department's Technical Working Group on Fast Reactors, is to increase the capability of Member States in developing and applying advanced technologies in the area of long-lived radioactive waste utilization and transmutation. Twenty institutions from 15 Member States and one international organization participated in this CRP. The CRP concentrated on the assessment of the dynamic behavior of various transmutation systems. The reactor systems investigated comprise critical reactors, sub-critical accelerator driven systems with heavy liquid metal and gas cooling, critical molten salt systems, and hybrid fusion/fission systems. Both fertile and fertile-free fuel options have been investigated. Apart from the benchmarking of steady state core configurations (including the investigation of transmutation potential, burn-up behavior and decay heat of minor actinide (MA) bearing fuels), the CRP participants determined the safety coefficients for the individual systems and, in a second stage, performed transient analyses which reflected the generic safety related behavior of the various reactors types. (authors)

  18. Potential applications of environmental sampling and analysis for the IAEA

    SciTech Connect

    Raber, E.

    1993-03-01

    This objective of this paper is to address the usefulness of envirorunental sampling and analysis in support of the IAEA. In particular, whether state-of-the-art analytical methods may provide detection of undeclared nuclear activities. It is important to emphasize that envirorunental sampling offers the IAEA a method of improving the assurance that a particular facility has no ongoing undeclared nuclear activities. It is suggested as a supplement to the existing IAEA safeguards inspections and activities. Enviromental sampling with appropriate analytical techniques can detect unknown activity fairly well, but it is not very reliable for determining how much or when activity has actually occured. Additionally, it is important to point out that the cost of such an envirorunental sampling program needs to be balanced with the confidence provided to detect undeclared nuclear activities. Environmental sampling wig probably not allow the IAEA to reduce or eliminate some of its existing baseline activities. The addition of an environmental sampling and analysis program will entail a cost of its own, and adding such a program may not reduce IAEA total costs. The overall cost of such a program will depend on the level of confidence required, (e.g. number and type of samples and analyses), the Quality Assurance plan to be implemented and the number of sites to be inspected. A more detailed cost analysis is not within the scope of this paper.

  19. Nuclear Fusion prize laudation Nuclear Fusion prize laudation

    NASA Astrophysics Data System (ADS)

    Burkart, W.

    2011-01-01

    Clean energy in abundance will be of critical importance to the pursuit of world peace and development. As part of the IAEA's activities to facilitate the dissemination of fusion related science and technology, the journal Nuclear Fusion is intended to contribute to the realization of such energy from fusion. In 2010, we celebrated the 50th anniversary of the IAEA journal. The excellence of research published in the journal is attested to by its high citation index. The IAEA recognizes excellence by means of an annual prize awarded to the authors of papers judged to have made the greatest impact. On the occasion of the 2010 IAEA Fusion Energy Conference in Daejeon, Republic of Korea at the welcome dinner hosted by the city of Daejeon, we celebrated the achievements of the 2009 and 2010 Nuclear Fusion prize winners. Steve Sabbagh, from the Department of Applied Physics and Applied Mathematics, Columbia University, New York is the winner of the 2009 award for his paper: 'Resistive wall stabilized operation in rotating high beta NSTX plasmas' [1]. This is a landmark paper which reports record parameters of beta in a large spherical torus plasma and presents a thorough investigation of the physics of resistive wall mode (RWM) instability. The paper makes a significant contribution to the critical topic of RWM stabilization. John Rice, from the Plasma Science and Fusion Center, MIT, Cambridge is the winner of the 2010 award for his paper: 'Inter-machine comparison of intrinsic toroidal rotation in tokamaks' [2]. The 2010 award is for a seminal paper that analyzes results across a range of machines in order to develop a universal scaling that can be used to predict intrinsic rotation. This paper has already triggered a wealth of experimental and theoretical work. I congratulate both authors and their colleagues on these exceptional papers. W. Burkart Deputy Director General Department of Nuclear Sciences and Applications International Atomic Energy Agency, Vienna

  20. Fusion energy

    NASA Astrophysics Data System (ADS)

    1990-09-01

    The main purpose of the International Thermonuclear Experimental Reactor (ITER) is to develop an experimental fusion reactor through the united efforts of many technologically advanced countries. The ITER terms of reference, issued jointly by the European Community, Japan, the USSR, and the United States, call for an integrated international design activity and constitute the basis of current activities. Joint work on ITER is carried out under the auspices of the International Atomic Energy Agency (IAEA), according to the terms of quadripartite agreement reached between the European Community, Japan, the USSR, and the United States. The site for joint technical work sessions is at the Max Planck Institute of Plasma Physics. Garching, Federal Republic of Germany. The ITER activities have two phases: a definition phase performed in 1988 and the present design phase (1989 to 1990). During the definition phase, a set of ITER technical characteristics and supporting research and development (R and D) activities were developed and reported. The present conceptual design phase of ITER lasts until the end of 1990. The objectives of this phase are to develop the design of ITER, perform a safety and environmental analysis, develop site requirements, define future R and D needs, and estimate cost, manpower, and schedule for construction and operation. A final report will be submitted at the end of 1990. This paper summarizes progress in the ITER program during the 1989 design phase.

  1. Fusion energy

    SciTech Connect

    Not Available

    1990-09-01

    The main purpose of the International Thermonuclear Experimental Reactor (ITER) is to develop an experimental fusion reactor through the united efforts of many technologically advanced countries. The ITER terms of reference, issued jointly by the European Community, Japan, the USSR, and the United States, call for an integrated international design activity and constitute the basis of current activities. Joint work on ITER is carried out under the auspices of the International Atomic Energy Agency (IAEA), according to the terms of quadripartite agreement reached between the European Community, Japan, the USSR, and the United States. The site for joint technical work sessions is at the MaxPlanck Institute of Plasma Physics. Garching, Federal Republic of Germany. The ITER activities have two phases: a definition phase performed in 1988 and the present design phase (1989--1990). During the definition phase, a set of ITER technical characteristics and supporting research and development (R D) activities were developed and reported. The present conceptual design phase of ITER lasts until the end of 1990. The objectives of this phase are to develop the design of ITER, perform a safety and environmental analysis, develop site requirements, define future R D needs, and estimate cost, manpower, and schedule for construction and operation. A final report will be submitted at the end of 1990. This paper summarizes progress in the ITER program during the 1989 design phase.

  2. A brief history of NDA at the IAEA.

    SciTech Connect

    Sprinkle, J. K.; Sinkule, B. J.; Hsue, S.-T.; Abhold, M. E.

    2001-01-01

    Nearly 30 years ago, the first portable nondestructive assay instrument, a SAM-II, was brought to Vienna for IAEA consideration. This initial foray into the usage of nondestructive assay (NDA) as an independent assessment tool has materialized into one of the important tools for IAEA inspections. NDA instruments have several inherent advantages for inspectors; their measurements generate no radioactive waste, provide immediate answers, do not require specialized operators, and can be either taken to the items to be measured (portable instruments), or the items for measurement can be brought to the instruments, such as can be applied in on-site IAEA laboratories or off-site IAEA lab at Siebersdorf. The SAM-II was a small, lightweight, battery-powered, gamma-ray instrument used for uranium enrichment measurements. It was also found to be usehl for locating nuclear material, distinguishing between uranium and plutonium, and determining the active length of items like fuel pins. However it was not well suited for determining the amount of bulk material present, except for small containers of low-density materials. A 6-sided neutron coincidence counter, easily disassembled so it could be shipped and carried by airplane, was developed for bulk measurements of plutonium. The HLNCC (High Level Neutron Coincidence Counter) was immediately useful for quantitative measurements of pure plutonium oxide. However, the IAEA had to make a trade-off between the ease of use of NDA instruments on-site, and the problems of obtaining small samples for shipment to an independent lab for more accurate analysis. NDA does not create radioactive waste, so as waste handling has become more cautious and more regulated, NDA looks better and better. After acceptance of NDA by the IAEA for routine use, the follow-up question was naturally, 'How much better can this measurement be made?' The Program for Technical Assistance to IAEA Safeguards (POTAS) supported multiple and varied efforts in this

  3. International Workshops to Foster Implementation of the IAEA Additional Protocol

    SciTech Connect

    Killinger, Mark H.; Coates, Cameron W.; Bedke, Michael L.

    2003-07-14

    A country’s adherence to the International Atomic Energy Agency’s (IAEA) Additional Protocol is an important statement to the world of that country’s commitment to nuclear nonproliferation. Without the Additional Protocol (AP) it is possible, as demonstrated in Iraq, for a country party to the Non-Proliferation Treaty (NPT) to clandestinely work toward nuclear weapons and be undetected by the IAEA. This is because classical safeguards under the NPT are directed at diversion of nuclear material from declared activities. But a country may instead build undeclared activities to produce weapons-grade nuclear material. The AP is directed at detecting those undeclared activities. As of May 2003, 73 countries had signed the AP, but only 35 have entered into force. To further adherence to the AP, the IAEA has held regional, high-level seminars in Japan, South Africa, Kazakhstan, Peru, Romania, and Malaysia to explain AP provisions. To supplement these policy-level seminars, the U.S. Department of Energy (DOE) has undertaken to develop a set of modules of technical competencies required to implement the AP. The intent is to work closely with the IAEA by providing these technical competencies to countries as well as to complement the IAEA’s regional seminars and other outreach efforts. This paper briefly describes the technical competency modules.

  4. The US Support program to IAEA Safeguards - 2008

    SciTech Connect

    Pepper,S.

    2008-06-09

    The U.S. Support Program to IAEA Safeguards (USSP) was established in 1977 to provide technical assistance to the IAEA Department of Safeguards. Since that time the U.S. Department of State has provided funding of over $200 million and over 900 tasks have been completed by USSP contractors on behalf of the KEA. The USSP is directed by a U.S. interagency subcommittee known as the Subgroup on Safeguards Technical Support (SSTS) and is managed by the International Safeguards Project Office (ISPO) at Brookhaven National Laboratory. In recent years, the SSTS and ISPO have identified priorities to guide the process of determining which IAEA requests are aligned with US. policy and will be funded. The USSP priorities are reviewed and updated prior to the USSP Annual Review Meeting which is hosted by the International Atomic Energy Agency (IAEA) each spring in Vienna, Austria. This paper will report on the 2008 USSP priorities and be an introduction for a session which will consist of four papers on USSP priorities and four other papers related to USSP activities.

  5. The 23rd Stirling Physics Meeting

    NASA Astrophysics Data System (ADS)

    1998-01-01

    This was how the chairman, Dennis Chisholm, described the morning's major topic `Higher Still' - the proposed successor to the Scottish Higher Grade and Sixth Year Studies Certificates. It was chosen for this one-day conference on 21 May as the documentation for it had been promised for 1 May. Alas, as the main speaker, Mary Webster, admitted, the materials were still `sitting in a warehouse in Dundee' and the programme has now been postponed for a year! Nevertheless the team, which included Rothwell Glen and Tony Keeley, bravely fielded a series of awkward questions from a critical audience of over 200 physics teachers. Physics with gusto If `Higher Still' was a damp squib Rebecca Crawford's team from Glasgow Science and Technology Outreach set the place ablaze. In their first spectacular demonstration Rebecca lay on a bed of sharp nails while someone stood on top of her! This was followed by a deafening explosion produced by cornflour powder igniting in a tin can used to model a grain silo. Hydrogen was then produced by aluminium foil in a solution of caustic soda, and used to inflate a balloon before exploding it with a flaming torch. Using two 2 mW lasers the green spot produced by one was shown to appear much brighter than the red spot from the other, The Australian demonstrator explained that some of their fire engines were now being painted green instead of red as our eyes are more sensitive to green. A small low-inertia electric motor turned when attached to copper and zinc electrodes inserted first in a glass of Coke and then in a fresh grapefruit. Gas-filled sausage balloons were packed into a flask of liquid nitrogen where they collapsed as the gas inside liquefied. When the bunch of deflated balloons was removed and thrown on to the bench the results were dramatic. As you might expect, the `best wine' was kept to the last. Kenneth Skeldon and two colleagues in the University of Glasgow have built a high voltage generator based on a resonant transformer derived from a standard Tesla coil with a high-Q secondary. This is capable of delivering around a million volts, which produce fantastic lightning flashes. A volunteer from the audience was invited to enter a huge Faraday Cage which was then subjected to these high voltage sparks! For a while the door of the cage jammed but eventually the victim emerged unscathed! This is, of course, not just an entertainment. The Gusto show is taken into schools and targeted at lower secondary pupils about to make their subject choices. The team also gives large scale physics demonstration lectures and could play to 10 000 children in a month. So physics is fun and physics is relevant to everyday life! Support for physics teachers Lesley Glasser chaired the afternoon session, which she opened by introducing the Institute's Education Officer. The Stirling Meeting would not be the same without the `commercial slot' presented again so ably by Catherine Wilson. Physics teachers are an endangered species and the Institute is determined to do whatever it can to support them. Plans are afoot to make sure the Schools Lectures are modified, if necessary, to take account of the educational differences in Scotland. The London-based `Physics in Perspective' course not only introduces sixth-formers to some of the frontiers of physics but gives enough free time for them to visit places of interest in the city - from the Science Museum to Soho. `So they associate physics with enjoyment!' Another Scottish Update Course is planned for teachers, and a brand new glossy booklet, sent free to all schools, will show pupils that choosing physics is a `Smart Move'. Finally the Institute has just started a major post-16 curriculum project which will include a variety of support materials to keep teachers abreast of continuing developments in physics. Each year, IoP Teacher of Physics Awards are given to `outstanding teachers of physics who inspire others to continue with and enjoy their physics'. Ann Jarvie, Deputy Head of St Ninian's High School in Kirkintilloch, certainly felt that this was a fitting description of their physics master Pat Cleary, who was presented with his Award at the Stirling Meeting. Of him she said `He encourages and supports his pupils. He doesn't talk down to them and he is concerned about all pupils, not just the high fliers. He has a great sense of humour and enthuses his pupils. Pat's passion for physics is all-consuming; he will beg, borrow and (almost) steal for physics! He only tolerates senior management because they supply him with money for physics!' Before giving his keynote lecture Professor Russell Stannard presented Pat Cleary with his Award. Venturing beyond physics In this stimulating presentation Russell Stannard not only summarized current thinking in cosmology, he also considered possible theological implications. The universe is a big place consisting of 1011 galaxies each containing 1011 stars. It may be that 1030 stars have planets and so the universe could be teeming with millions of different forms of life. Is size then the most important thing for us? What goes on in the human head is much more interesting than the nuclear reactions of the sun. Surely human consciousness, associated with the complexity of the brain, is of more importance to us than mere size. In the beginning If we ask about the origin of the universe, e.g. `How did it get started?' then we look to science for an answer. On the other hand we might ask a theological question about creation, e.g. `Why is there something rather than nothing?' Current ideas of the Big Bang are based on several independent strands of evidence which Russell discussed in some detail. Space-time `It is idle to look for time before creation, as if time can be found before time.... We should say that time began with creation rather than creation began with time.' This amazingly modern concept - that space and time were created together - was asserted by St Augustine 1500 years ago! If time and space are `welded' together time didn't exist before the Big Bang and so we cannot ask what caused the Big Bang. Cause precedes effect. The future The universe is expanding but at a reduced rate. Will it eventually stop expanding and start to contract? If so, will it reach a point where it again stops and starts to expand again - the Big Bounce? Or will it collapse completely - the Big Crunch? Alternatively will the universe go on expanding forever? The answers to these questions depend on the density of the universe. The density needed to make the universe start to contract is called the critical density. At present the observed density is around 0.3% of critical density. This would suggest that the universe should continue expanding forever. However, the movements of galaxies and clusters of galaxies indicate that there must be some undetected `dark matter' which, calculations show, increases the density of the universe to within a factor of two of critical density. If this is correct the density at the early stages of the Big Bang would have had to be correct to within 1 part in 1060. DIY universe A final word of warning to anyone who aspires to building a better universe! If you make your Big Bang less violent the universe will expand and then collapse to a Big Crunch before life has time to develop. Make it more violent and gases will disperse quickly so that stars and planets cannot form. If you make gravity (G) weaker, nuclear reactions won't be triggered and only brown dwarfs will form. Life will be impossible. Make gravity stronger and only fast-burning massive stars will form. These blue giants last for only a million years and there will be no time for life to evolve. In summary: are we in one of an infinite number of universes because the conditions happen to be just right for us or is this universe a one-off put-up job designed by God? Cosmology neither proves nor disproves the existence of God. However if, on other grounds, you are a believer, current thinking in cosmology shouldn't worry you. Thanks To circle the world in 80 days may be interesting. To encompass the universe in less than 80 minutes is, in the chairperson's words, mind-blowing. The day ended with votes of thanks to all contributors and to Jack Woolsey and his team for organizing the meeting. Jim Jardine

  6. The 23rd Annual Consortium of Geologists

    ERIC Educational Resources Information Center

    Cronin, Jim

    2008-01-01

    Today's scientific theories are the result of a long collaborative process, sometimes over centuries, among many different scientists from various parts of the world. To communicate this concept to middle school students and introduce them to the theory of plate tectonics and continental drift, they are placed in the role of geologists attending a…

  7. The 23rd Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Technological areas covered include space lubrication, bearings, aerodynamic devices, spacecraft latches, deployment, positioning, and pointing. Devices for Space Station docking and manipulator and teleoperator mechanisms are also described.

  8. IAEA Theory Summary 1998 IAEA Meeting, Yokohama, Japan - Oct. 17--24, 1998

    SciTech Connect

    W.M. Tang

    2000-08-07

    This is a summary of the advances in magnetic fusion energy theory research presented at the 17th International Atomic Energy Agency Fusion Energy Conference from 17--24 October, 1998 in Yokohama, Japan. Theory and simulation results from this conference provided encouraging evidence of significant progress in understanding the physics of thermonuclear plasmas. Indeed, the grand challenge for this field is to acquire the basic understanding that can readily enable the innovations which would make fusion energy practical. In this sense, as depicted in Fig. 1, research in fusion energy is increasingly able to be categorized as fitting well the ''Pasteur's Quadrant'' paradigm, where the research strongly couples basic science (''Bohr's Quadrant'') to technological impact (''Edison's Quadrant''). As supported by some of the work presented at this conference, this trend will be further enhanced by advanced simulations. Eventually, realistic three-dimensional modeling capabilities, when properly combined with rapid and complete data interpretation of results from both experiments and simulations, can contribute to a greatly enhanced cycle of understanding and innovation. Plasma science theory and simulation have provided reliable foundations for this improved modeling capability, and the exciting advances in high-performance computational resources have further accelerated progress.

  9. IBC's 23rd Annual Antibody Engineering, 10th Annual Antibody Therapeutics international conferences and the 2012 Annual Meeting of The Antibody Society: December 3-6, 2012, San Diego, CA.

    PubMed

    Klöhn, Peter-Christian; Wuellner, Ulrich; Zizlsperger, Nora; Zhou, Yu; Tavares, Daniel; Berger, Sven; Zettlitz, Kirstin A; Proetzel, Gabriele; Yong, May; Begent, Richard H J; Reichert, Janice M

    2013-01-01

    The 23rd Annual Antibody Engineering, 10th Annual Antibody Therapeutics international conferences, and the 2012 Annual Meeting of The Antibody Society, organized by IBC Life Sciences with contributions from The Antibody Society and two Scientific Advisory Boards, were held December 3-6, 2012 in San Diego, CA. The meeting drew over 800 participants who attended sessions on a wide variety of topics relevant to antibody research and development. As a prelude to the main events, a pre-conference workshop held on December 2, 2012 focused on intellectual property issues that impact antibody engineering. The Antibody Engineering Conference was composed of six sessions held December 3-5, 2012: (1) From Receptor Biology to Therapy; (2) Antibodies in a Complex Environment; (3) Antibody Targeted CNS Therapy: Beyond the Blood Brain Barrier; (4) Deep Sequencing in B Cell Biology and Antibody Libraries; (5) Systems Medicine in the Development of Antibody Therapies/Systematic Validation of Novel Antibody Targets; and (6) Antibody Activity and Animal Models. The Antibody Therapeutics conference comprised four sessions held December 4-5, 2012: (1) Clinical and Preclinical Updates of Antibody-Drug Conjugates; (2) Multifunctional Antibodies and Antibody Combinations: Clinical Focus; (3) Development Status of Immunomodulatory Therapeutic Antibodies; and (4) Modulating the Half-Life of Antibody Therapeutics. The Antibody Society's special session on applications for recording and sharing data based on GIATE was held on December 5, 2012, and the conferences concluded with two combined sessions on December 5-6, 2012: (1) Development Status of Early Stage Therapeutic Antibodies; and (2) Immunomodulatory Antibodies for Cancer Therapy.

  10. Assessment of Alternative Funding Mechanisms for the IAEA

    SciTech Connect

    Toomey, Christopher; Wyse, Evan T.; Kurzrok, Andrew J.; Ford, Benjamin E.

    2012-06-15

    While the International Atomic Energy Agency (IAEA) has enjoyed substantial success and prestige in the international community, there is growing concern that global demographic trends, advances in technology and the trend towards austerity in Member State budgets will stretch the Agency’s resources to a point where it may no longer be possible to execute its multifaceted mission in its entirety. As part of an ongoing effort by the Next Generation Safeguards Initiative to evaluate the IAEA’s long-term budgetary concerns , this paper proposes a series of alternate funding mechanisms that have the potential to sustain the IAEA in the long-term, including endowment, charity, and fee-for-service funding models.

  11. IAEA proficiency tests for determination of radionuclides in sea water.

    PubMed

    Harms, Arend; Khanh Pham, Mai; Blinova, Oxana; Tarjan, Sandor; Nies, Hartmut; Osvath, Iolanda

    2017-02-14

    The International Atomic Energy Agency organised four proficiency tests between 2012 and 2015 to test the performance of participating laboratories in an analysis of radionuclides in sea water samples. These exercises were initiated to support IAEA Member States in sea water analyses of tritium, strontium-90 and caesium isotopes in relation to the accident at the Fukushima Daiichi nuclear power station, in March 2011, and subsequent contamination of the marine environment.

  12. IAEA Fellowship Program, 1996 report on United States participants

    SciTech Connect

    1996-12-31

    The International Atomic Energy Agency (IAEA) Fellowship Program began in April 1958 as a part of the Agency`s Technical Cooperation (TC) Program. Through the TC Program, the IAEA provides technical assistance to meet the needs of recipient countries and to bring about a substantial transfer of technology. This is done by providing experts, equipment, fellowships, and training courses. This report addresses the US component of the fellowship program. These fellowships provide opportunities for research and training of scientists, engineers and physicians from developing countries in the peaceful application of nuclear energy. The fellowships are awarded to persons who are, or soon will be, trusted with responsibilities that are important to the development of their countries. Fellowship awards are classified into two groups, those financed by the IAEA General Fund or the UNDP Fund (Type 1 Fellowships and Scientific Visits), and those offered by Member States (Type 2 Fellowships). In placing individuals, preference is given to applicants from countries that are signatories to the Treaty on Non-Proliferation of Nuclear Weapons or to the Treaty for the Prohibition of Nuclear Weapons in Latin America.

  13. IAEA Fellowship Program, 1997 report on United States participants

    SciTech Connect

    1997-12-31

    The International Atomic Energy Agency (IAEA) Fellowship Program began in April 1958 as a part of the Agency`s Technical Cooperation (TC) Program. Through the TC Program, the IAEA provides technical assistance to meet the needs of recipient countries and to bring about a substantial transfer of technology. This is done by providing experts, equipment, fellowships, and training courses. This report addresses the US component of the fellowship program. These fellowships provide opportunities for research and training of scientists, engineers and physicians from developing countries in the peaceful application of nuclear energy. The fellowships are awarded to persons who are, or soon will be, trusted with responsibilities that are important to the development of their countries. Fellowship awards are classified into two groups, those financed by the IAEA General Fund or the UNDP Fund (Type 1 Fellowships and Scientific Visits), and those offered by Member States (Type 2 Fellowships). In placing individuals, preference is given to applicants from countries that are signatories to the Treaty on Non-Proliferation of Nuclear Weapons or to the Treaty for the Prohibition of Nuclear Weapons in Latin America.

  14. PREFACE: 11th IAEA Technical Meeting on H-mode Physics and Transport Barriers

    NASA Astrophysics Data System (ADS)

    Takizuka, Tomonori

    2008-07-01

    This volume of Journal of Physics: Conference Series contains papers based on invited talks and contributed posters presented at the 11th IAEA Technical Meeting on H-mode Physics and Transport Barriers. This meeting was held at the Tsukuba International Congress Center in Tsukuba, Japan, on 26-28 September 2007, and was organized jointly by the Japan Atomic Energy Agency and the University of Tsukuba. The previous ten meetings in this series were held in San Diego (USA) 1987, Gut Ising (Germany) 1989, Abingdon (UK) 1991, Naka (Japan) 1993, Princeton (USA) 1995, Kloster Seeon (Germany) 1997, Oxford (UK) 1999, Toki (Japan) 2001, San Diego (USA) 2003, and St Petersburg (Russia) 2005. The purpose of the eleventh meeting was to present and discuss new results on H-mode (edge transport barrier, ETB) and internal transport barrier, ITB, experiments, theory and modeling in magnetic fusion research. It was expected that contributions give new and improved insights into the physics mechanisms behind high confinement modes of H-mode and ITBs. Ultimately, this research should lead to improved projections for ITER. As has been the tradition at the recent meetings of this series, the program was subdivided into six topics. The topics selected for the eleventh meeting were: H-mode transition and the pedestal-width Dynamics in ETB: ELM threshold, non-linear evolution and suppression, etc Transport relations of various quantities including turbulence in plasmas with ITB: rotation physics is especially highlighted Transport barriers in non-axisymmetric magnetic fields Theory and simulation on transport barriers Projections of transport barrier physics to ITER For each topic there was an invited talk presenting an overview of the topic, based on contributions to the meeting and on recently published external results. The six invited talks were: A Leonard (GA, USA): Progress in characterization of the H-mode pedestal and L-H transition N Oyama (JAEA, Japan): Progress and issues in

  15. Deterring Nuclear Proliferation: The Importance of IAEA Safeguards: A TEXTBOOK

    SciTech Connect

    Rosenthal, M.D.; Fishbone, L.G.; Gallini, L.; Krass, A.; Kratzer, M.; Sanborn, J.; Ward, B.; Wulf, N. A.

    2012-03-13

    Nuclear terrorism and nuclear proliferation are among the most pressing challenges to international peace and security that we face today. Iran and Syria remain in non-compliance with the safeguards requirements of the NPT, and the nuclear ambitions of North Korea remain unchecked. Despite these challenges, the NPT remains a cornerstone of the nuclear non-proliferation regime, and the safeguards implemented by the International Atomic Energy Agency (IAEA) under the NPT play a critical role in deterring nuclear proliferation.How do they work? Where did they come from? And what is their future? This book answers these questions. Anyone studying the field of nuclear non-proliferation will benefit from reading this book, and for anyone entering the field, the book will enable them to get a running start. Part I describes the foundations of the international safeguards system: its origins in the 1930s - when new discoveries in physics made it clear immediately that nuclear energy held both peril and promise - through the entry into force in 1970 of the NPT, which codified the role of IAEA safeguards as a means to verify states NPT commitments not to acquire nuclear weapons. Part II describes the NPT safeguards system, which is based on a model safeguards agreement developed specifically for the NPT, The Structure and Content of Agreements between the Agency and States required in connection with the Treaty on the Non-Proliferation of Nuclear Weapons, which has been published by the IAEA as INFCIRC/153. Part III describes events, especially in South Africa, the DPRK, and Iraq in the early 1990s, that triggered a transformation in the way in which safeguards were conceptualized and implemented.

  16. Radiation detectors as surveillance monitors for IAEA safeguards

    SciTech Connect

    Fehlau, P.E.; Dowdy, E.J.

    1980-10-01

    Radiation detectors used for personnel dosimetry are examined for use under IAEA Safeguards as monitors to confirm the passage or nonpassage (YES/NO) of plutonium-bearing nuclear material at barrier penetrations declared closed. In this application where backgrounds are ill defined, no advantage is found for a particular detector type because of intrinsic efficiency. Secondary considerations such as complexity, ease of tamper-proofing, and ease of readout are used to recommend specific detector types for routine monitoring and for data-base measurements. Recommendations are made for applications, data acquisition, and instrument development.

  17. [Nuclear energy and environment: review of the IAEA environmental projects].

    PubMed

    Fesenko, S; Fogt, G

    2012-01-01

    The review of the environmental projects of the International Atomic Energy Agency is presented. Basic IAEA documents intended to protect humans and the Environment are considered and their main features are discussed. Some challenging issues in the area of protection of the Environment and man, including the impact of nuclear facilities on the environment, radioactive waste management, and remediation of the areas affected by radiological accidents, nuclear testing and sites of nuclear facilities are also discussed. The need to maintain the existing knowledge in radioecology and protection of the environment is emphasised.

  18. Strengthening IAEA safeguards in an era of nuclear cooperation

    SciTech Connect

    Hooper, R.

    1995-11-01

    Since the end of the Cold War the world has witnessed a remarkable series of events demonstrating that universal adherence to the principles of nuclear non-proliferation and disarmament are no longer utopian dreams. The author reviews the actions of various countries to terminate or reduce nuclear weapons programs and those that are resisting the non-proliferation efforts. The author addresses efforts of the International Atomic Energy Agency (IAEA) to safeguard declared nuclear material more cost-effectively and deal with the possibility of undeclared nuclear activities.

  19. Training activities at FSUE 'RADON' and Lomonosov's Moscow state university under practical arrangements with IAEA

    SciTech Connect

    Batyukhnova, O.G.; Karlina, O.K.; Neveykin, P.P.; Kalmykov, S.N.; Ojovan, M.I.

    2013-07-01

    The International Education Training Centre (IETC) at Moscow Federal State Unitary Enterprise (FSUE) 'Radon', in co-operation with the International Atomic Energy Agency (IAEA), has developed expertise and provided training to waste management personnel for the last 15 years. Since 1997, the educational system of the enterprise with the support of the IAEA has acquired an international character: more than 470 experts from 35 countries - IAEA Member States completed the professional development. Training is conducted at various thematic courses or fellowships for individual programs and seminars on IAEA technical projects. In June 2008 a direct agreement (Practical Arrangements) has been signed between FSUE 'Radon' and the IAEA on cooperation in the field of development of new technologies, expert's advice to IAEA Member States, and, in particular, the training of personnel in the field of radioactive waste management (RWM), which opens up new perspectives for fruitful cooperation of industry professionals. A similar agreement - Practical Arrangements - has been signed between Lomonosov's MSU and the IAEA in 2012. In October 2012 a new IAEA two-weeks training course started at Lomonosov's MSU and FSUE 'Radon' in the framework of the Practical Agreements signed. Pre-disposal management of waste was the main topic of the courses. The paper summarizes the current experience of the FSUE 'Radon' in the organization and implementation of the IAEA sponsored training and others events and outlines some of strategic educational elements, which IETC will continue to pursue in the coming years. (authors)

  20. RECRUITMENT OF U.S. CITIZENS FOR VACANCIES IN IAEA SAFEGUARDS

    SciTech Connect

    PEPPER,S.E.; DECARO,D.; WILLIAMS,G.; CARELLI,J.; ASSUR,M.

    1999-07-25

    The International Atomic Energy Agency (IAEA) relies on its member states to assist with recruiting qualified individuals for positions within the IAEA's secretariat. It is important that persons within and outside the US nuclear and safeguards industries become aware of career opportunities available at the IAEA, and informed about important vacancies. The IAEA has established an impressive web page to advertise opportunities for employment. However, additional effort is necessary to ensure that there is sufficient awareness in the US of these opportunities, and assistance for persons interested in taking positions at the IAEA. In 1998, the Subgroup on Safeguards Technical Support (SSTS) approved a special task under the US Support Program to IAEA Safeguards (USSP) for improving US efforts to identify qualified candidates for vacancies in IAEA's Department of Safeguards. The International Safeguards Project Office (ISPO) developed a plan that includes increased advertising, development of a web page to support US recruitment efforts, feedback from the US Mission in Vienna, and interaction with other recruitment services provided by US professional organizations. The main purpose of this effort is to educate US citizens about opportunities at the IAEA so that qualified candidates can be identified for the IAEA's consideration.

  1. Improving Quality and Access to Radiation Therapy-An IAEA Perspective.

    PubMed

    Abdel-Wahab, May; Zubizarreta, Eduardo; Polo, Alfredo; Meghzifene, Ahmed

    2017-04-01

    The International Atomic Energy Agency (IAEA) has been involved in radiation therapy since soon after its creation in 1957. In response to the demands of Member States, the IAEA׳s activities relating to radiation therapy have focused on supporting low- and middle-income countries to set up radiation therapy facilities, expand the scope of treatments, or gradually transition to new technologies. In addition, the IAEA has been very active in providing internationally harmonized guidelines on clinical, dosimetry, medical physics, and safety aspects of radiation therapy. IAEA clinical research has provided evidence for treatment improvement as well as highly effective resource-sparing interventions. In the process, training of researchers occurs through this program. To provide this support, the IAEA works with its Member States and multiple partners worldwide through several mechanisms. In this article, we review the main activities conducted by the IAEA in support to radiation therapy. IAEA support has been crucial for achieving tangible results in many low- and middle-income countries. However, long-term sustainability of projects can present a challenge, especially when considering health budget constraints and the brain drain of skilled professionals. The need for support remains, with more than 90% of patients in low-income countries lacking access to radiotherapy. Thus, the IAEA is expected to continue its support and strengthen quality radiation therapy treatment of patients with cancer.

  2. Tritium accountancy in fusion systems

    SciTech Connect

    Klein, J.E.; Clark, E.A.; Harvel, C.D.; Farmer, D.A.; Tovo, L.L.; Poore, A.S.; Moore, M.L.

    2015-03-15

    The US Department of Energy (DOE) has clearly defined requirements for nuclear material control and accountability (MCA) of tritium whereas the International Atomic Energy Agency (IAEA) does not since tritium is not a fissile material. MCA requirements are expected for tritium fusion machines and will be dictated by the host country or regulatory body where the machine is operated. Material Balance Areas (MBA) are defined to aid in the tracking and reporting of nuclear material movements and inventories. Material sub-accounts (MSA) are established along with key measurement points (KMP) to further subdivide a MBA to localize and minimize uncertainties in the inventory difference (ID) calculations for tritium accountancy. Fusion systems try to minimize tritium inventory which may require continuous movement of material through the MSA. The ability of making meaningful measurements of these material transfers is described in terms of establishing the MSA structure to perform and reconcile ID calculations. For fusion machines, changes to the traditional ID equation will be discussed which includes breeding, burn-up, and retention of tritium in the fusion device. The concept of 'net' tritium quantities consumed or lost in fusion devices is described in terms of inventory taking strategies and how it is used to track the accumulation of tritium in components or fusion machines. (authors)

  3. TRITIUM ACCOUNTANCY IN FUSION SYSTEMS

    SciTech Connect

    Klein, J. E.; Farmer, D. A.; Moore, M. L.; Tovo, L. L.; Poore, A. S.; Clark, E. A.; Harvel, C. D.

    2014-03-06

    The US Department of Energy (DOE) has clearly defined requirements for nuclear material control and accountability (MC&A) of tritium whereas the International Atomic Energy Agency (IAEA) does not since tritium is not a fissile material. MC&A requirements are expected for tritium fusion machines and will be dictated by the host country or regulatory body where the machine is operated. Material Balance Areas (MBAs) are defined to aid in the tracking and reporting of nuclear material movements and inventories. Material subaccounts (MSAs) are established along with key measurement points (KMPs) to further subdivide a MBA to localize and minimize uncertainties in the inventory difference (ID) calculations for tritium accountancy. Fusion systems try to minimize tritium inventory which may require continuous movement of material through the MSAs. The ability of making meaningful measurements of these material transfers is described in terms of establishing the MSA structure to perform and reconcile ID calculations. For fusion machines, changes to the traditional ID equation will be discussed which includes breading, burn-up, and retention of tritium in the fusion device. The concept of “net” tritium quantities consumed or lost in fusion devices is described in terms of inventory taking strategies and how it is used to track the accumulation of tritium in components or fusion machines.

  4. 49 CFR 171.26 - Additional requirements for the use of the IAEA Regulations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... may be offered for transportation or transported in accordance with the IAEA Regulations (IBR, see... 49 Transportation 2 2013-10-01 2013-10-01 false Additional requirements for the use of the IAEA Regulations. 171.26 Section 171.26 Transportation Other Regulations Relating to Transportation PIPELINE...

  5. 49 CFR 171.26 - Additional requirements for the use of the IAEA Regulations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... may be offered for transportation or transported in accordance with the IAEA Regulations (IBR, see... 49 Transportation 2 2012-10-01 2012-10-01 false Additional requirements for the use of the IAEA Regulations. 171.26 Section 171.26 Transportation Other Regulations Relating to Transportation PIPELINE...

  6. Role of IAEA (International Atomic Energy Agency) safeguards in confidence building

    SciTech Connect

    Augustson, R.H.

    1989-01-01

    In this paper, I will examine some attributes of confidence building and connect them with how the International Atomic Energy Agency (IAEA) interacts with its member states in carrying out its safeguards function. These interactions and the structure set up to define them help maintain and strengthen confidence between the IAEA and the member states and among these states. 3 refs.

  7. End user needs for enhanced IAEA Safeguards Information Management Capabilities

    SciTech Connect

    Badalamente, R.; Anzelon, G.; Deland, S.; Whiteson, R.

    1994-07-01

    The International Atomic Energy Agency is undertaking a program for strengthening its safeguards on the recognition that safeguards must give assurance not only of the non-diversion of declared material or that declared facilities are not being misused, but also of the absence of any undeclared nuclear activities in States which have signed comprehensive safeguards agreements with the Agency. The IAEA has determined that the detection of undeclared nuclear activities and the creation of confidence in the continuing peaceful use of declared material and facilities is largely dependent on more information being made available to the Agency and on the capability of the Agency to make more effective use of this additional information, as well as existing information.

  8. Patient exposure tracking: the IAEA smart card project.

    PubMed

    Rehani, Madan M; Frush, Donald P

    2011-09-01

    The existing approach of radiation protection is largely based on the collective dose to the population with provisions for protection at an individual level through justification and optimisation. With the individual patient dose now exceeding the life-long occupational dose to a worker in a typical radiology practice, there is a need to establish approaches based on the protection of an individual patient. Radiation exposure tracking seems a way forward in this respect. Technological advances in recent years have provided opportunities for tracking to becoming a reality. The IAEA project on Smart Card/SmartRadTrack is described in this paper. The tracking is now a reality in a few dozen centres in many countries connected by picture archiving and communication systems, and there is hope that this will extend to cover other countries and continents.

  9. Los Alamos National Laboratory support to IAEA environmental safeguards

    SciTech Connect

    Steiner, Robert E; Dry, Don E; Roensch, Fred R; Kinman, Will S; Roach, Jeff L; La Mont, Stephen P

    2010-12-01

    The nuclear and radiochemistry group provides sample preparation and analysis support to the International Atomic Energy Agency (IAEA) Network of Analytical Laboratories (NWAL). These analyses include both non-destructive (alpha and gamma-ray spectrometry) and destructive (thermal ionization mass spectrometry and inductively coupled plasma mass spectrometry) methods. On a bi-annual basis the NWAL laboratories are invited to meet to discuss program evolution and issues. During this meeting each participating laboratory summarizes their efforts over the previous two years. This presentation will present Los Alamos National Laboratories efforts in support of this program. Data showing results from sample and blank analysis will be presented along with capability enhancement and issues that arose over the previous two years.

  10. World progress toward fusion energy

    NASA Astrophysics Data System (ADS)

    Clarke, J. F.

    1989-09-01

    This paper will describe the progress in fusion science and technology from a world perspective. The paper will cover the current technical status, including the understanding of fusion's economic, environmental, and safety characteristics. Fusion experiments are approaching the energy breakeven condition. An energy gain (Q) of 30 percent has been achieved in magnetic confinement experiments. In addition, temperatures required for an ignited plasma (Ti = 32 KeV) and energy confinements (about 75 percent of that required for ignition) have been achieved in separate experiments. Two major facilities have started the experimental campaign to extend these results and achieve or exceed Q = 1 plasma conditions by 1990. Inertial confinement fusion experiments are also approaching thermonuclear conditions and have achieved a compression factor 100-200 times liquid D-T. Because of this progress, the emphasis in fusion research is turning toward questions of engineering feasibility. Leaders of the major fusion R and D programs in the European Community (EC), Japan, the United States, and the U.S.S.R. have agreed on the major steps that are needed to reach the point at which a practical fusion system can be designed. The United States is preparing for an experiment to address the last unexplored scientific issue, the physics of an ignited plasma, during the late 1990's. The EC, Japan, U.S.S.R., and the United States have joined together under the auspices of the International Atomic Energy Agency (IAEA) to jointly design and prepare the validating R&D for an international facility, the International Thermonuclear Experimental Reactor (ITER), to address all the remaining scientific issues and to explore the engineering technology of fusion around the turn of the century.

  11. The future of IAEA safeguards: challenges and responses

    SciTech Connect

    Pilat, Joseph F; Budlong - Sylvester, Kory W

    2011-01-01

    For nearly two decades, the International Atomic Energy Agency (lAEA) has been transforming its safeguards system to address the challenges posed by undeclared nuclear programs, the associated revelation of an extensive non-State nuclear procurement network and other issues, including past limits to its verification mandate and the burden of noncompliance issues. Implementing the new measures, including those in the Additional Protocol, and integrating new and old safeguards measures, remains a work in progress. Implementation is complicated by factors including the limited teclmological tools that are available to address such issues as safeguarding bulk handling facilities, detection of undeclared facilities/activities, especially related to enrichment, etc. As this process continues, new challenges are arising, including the demands of expanding nuclear power production worldwide, so-called safeguards by design for a new generation of facilities, the possible IAEA role in a fissile material cutoff treaty and other elements of the arms control and disarmament agenda, the possible role in 'rollback' cases, etc. There is no doubt safeguards will need to evolve in the future, as they have over the last decades. In order for the evolutionary path to proceed, there will inter alia be a need to identify technological gaps, especially with respect to undeclared facilities, and ensure they are filled by adapting old safeguards technologies, by developing and introducing new and novel safeguards teclmologies and/or by developing new procedures and protocols. Safeguards will also need to respond to anticipated emerging threats and to future, unanticipated threats. This will require strategic planning and cooperation among Member States and with the Agency. This paper will address challenges to IAEA safeguards and the technological possibilities and R&D strategies needed to meet those challenges in the context of the forty-year evolution of safeguards, including the ongoing

  12. Technologies for pre-screening IAEA swipe samples

    SciTech Connect

    Smith, Nicholas A.; Steeb, Jennifer L.; Lee, Denise L.; Huckabay, Heath A.; Ticknor, Brian W.

    2015-11-09

    During the course of International Atomic Energy Agency (IAEA) inspections, many samples are taken for the purpose of verifying the declared facility activities and identifying any possible undeclared activities. One of these sampling techniques is the environmental swipe sample. Due to the large number of samples collected, and the amount of time that is required to analyze them, prioritizing these swipes in the field or upon receipt at the Network of Analytical Laboratories (NWAL) will allow sensitive or mission-critical analyses to be performed sooner. As a result of this study, technologies were placed into one of three categories: recommended, promising, or not recommended. Both neutron activation analysis (NAA) and X-ray fluorescence (XRF) are recommended for further study and possible field deployment. These techniques performed the best in initial trials for pre-screening and prioritizing IAEA swipes. We learned that for NAA more characterization of cold elements (such as calcium and magnesium) would need to be emphasized, and for XRF it may be appropriate to move towards a benchtop XRF versus a handheld XRF due to the increased range of elements available on benchtop equipment. Promising techniques that will require additional research and development include confocal Raman microscopy, fluorescence microscopy, and infrared (IR) microscopy. These techniques showed substantive responses to uranium compounds, but expensive instrumentation upgrades (confocal Raman) or university engagement (fluorescence microscopy) may be necessary to investigate the utility of the techniques completely. Point-and-shoot (handheld) Raman and attenuated total reflectance–infrared (ATR-IR) measurements are not recommended, as they have not shown enough promise to continue investigations.

  13. Statistics in fusion experiments

    NASA Astrophysics Data System (ADS)

    McNeill, D. H.

    1997-11-01

    Since the reasons for the variability in data from plasma experiments are often unknown or uncontrollable, statistical methods must be applied. Reliable interpretation and public accountability require full data sets. Two examples of data misrepresentation at PPPL are analyzed: Te >100 eV on S-1 spheromak.(M. Yamada, Nucl. Fusion 25, 1327 (1985); reports to DoE; etc.) The reported high values (statistical artifacts of Thomson scattering measurements) were selected from a mass of data with an average of 40 eV or less. ``Correlated'' spectroscopic data were meaningless. (2) Extrapolation to Q >=0.5 for DT in TFTR.(D. Meade et al., IAEA Baltimore (1990), V. 1, p. 9; H. P. Furth, Statements to U. S. Congress (1989).) The DD yield used there was the highest through 1990 (>= 50% above average) and the DT to DD power ratio used was about twice any published value. Average DD yields and published yield ratios scale to Q<0.15 for DT, in accord with the observed performance over the last 3 1/2 years. Press reports of outlier data from TFTR have obscured the fact that the DT behavior follows from trivial scaling of the DD data. Good practice in future fusion research would have confidence intervals and other descriptive statistics accompanying reported numerical values (cf. JAMA).

  14. Scientific and technological advancements in inertial fusion energy

    NASA Astrophysics Data System (ADS)

    Hinkel, D. E.

    2013-10-01

    Scientific advancements in inertial fusion energy (IFE) were reported on at the IAEA Fusion Energy Conference, October 2012. Results presented transect the different ways to assemble the fuel, different scenarios for igniting the fuel, and progress in IFE technologies. The achievements of the National Ignition Campaign within the USA, using the National Ignition Facility (NIF) to indirectly drive laser fusion, have found beneficial the achievements in other IFE arenas such as directly driven laser fusion and target fabrication. Moreover, the successes at NIF have pay-off to alternative scenarios such as fast ignition, shock ignition, and heavy-ion fusion as well as to directly driven laser fusion. This synergy is summarized here, and future scientific studies are detailed.

  15. Scientific and technological advancements in inertial fusion energy

    SciTech Connect

    Hinkel, D. E.

    2013-09-26

    Scientific advancements in inertial fusion energy (IFE) were reported on at the IAEA Fusion Energy Conference, October 2012. Results presented transect the different ways to assemble the fuel, different scenarios for igniting the fuel, and progress in IFE technologies. The achievements of the National Ignition Campaign within the USA, using the National Ignition Facility (NIF) to indirectly drive laser fusion, have found beneficial the achievements in other IFE arenas such as directly driven laser fusion and target fabrication. Moreover, the successes at NIF have pay-off to alternative scenarios such as fast ignition, shock ignition, and heavy-ion fusion as well as to directly driven laser fusion. As a result, this synergy is summarized here, and future scientific studies are detailed.

  16. Scientific and technological advancements in inertial fusion energy

    DOE PAGES

    Hinkel, D. E.

    2013-09-26

    Scientific advancements in inertial fusion energy (IFE) were reported on at the IAEA Fusion Energy Conference, October 2012. Results presented transect the different ways to assemble the fuel, different scenarios for igniting the fuel, and progress in IFE technologies. The achievements of the National Ignition Campaign within the USA, using the National Ignition Facility (NIF) to indirectly drive laser fusion, have found beneficial the achievements in other IFE arenas such as directly driven laser fusion and target fabrication. Moreover, the successes at NIF have pay-off to alternative scenarios such as fast ignition, shock ignition, and heavy-ion fusion as well asmore » to directly driven laser fusion. As a result, this synergy is summarized here, and future scientific studies are detailed.« less

  17. Four Years of Practical Arrangements between IAEA and Moscow SIA 'Radon': Preliminary Results - 13061

    SciTech Connect

    Batyukhnova, O.G.; Karlina, O.K.; Neveikin, P.P.

    2013-07-01

    The International Education Training Centre (IETC) at Moscow State Unitary Enterprise Scientific and Industrial Association 'Radon' (SIA 'Radon'), in co-operation with the International Atomic Energy Agency (IAEA), has developed expertise and provided training to waste management personnel for the last 15 years. Since 1997, the educational system of the enterprise with the support of the IAEA has acquired an international character: more than 470 experts from 35 countries- IAEA Member States completed the professional development. Training is conducted at various thematic courses or fellowships for individual programs and seminars on IAEA technical projects. In June 2008 a direct agreement (Practical Arrangements) was signed between SIA 'Radon' and the IAEA on cooperation in the field of development of new technologies, expert's advice to IAEA Member States, and, in particular, the training of personnel in the field of radioactive waste management (RWM), which opens up new perspectives for fruitful cooperation of industry professionals. The paper summarizes the current experience of the SIA 'Radon' in the organization and implementation of the IAEA sponsored training and others events and outlines some of strategic educational elements, which IETC will continue to pursue in the coming years. (authors)

  18. 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems

    SciTech Connect

    Berk, Herbert L.; Breizman, Boris N.

    2014-02-21

    The 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems took place in Austin, Texas (7–11 September 2011). This meeting was organized jointly with the 5th IAEA Technical Meeting on Theory of Plasma Instabilities (5–7 September 2011). The two meetings shared one day (7 September 2011) with presentations relevant to both groups. Some of the work reported at these meetings was then published in a special issue of Nuclear Fusion [Nucl. Fusion 52 (2012)]. Summaries of the Energetic Particle Conference presentations were given by Kazuo Toi and Boris Breizman. They respectively discussed the experimental and theoretical progress presented at the meeting. Highlights of this meeting include the tremendous progress that has been achieved in the development of diagnostics that enables the ‘viewing’ of internal fluctuations and allows comparison with theoretical predictions, as demonstrated, for example, in the talks of P. Lauber and M. Osakabe. The need and development of hardened diagnostics in the severe radiation environment, such as those that will exist in ITER, was discussed in the talks of V. Kiptily and V.A. Kazakhov. In theoretical studies, much of the effort is focused on nonlinear phenomena. For example, detailed comparison of theory and experiment on D-III-D on the n = 0 geodesic mode was reported in separate papers by R. Nazikian and G. Fu. A large number of theoretical papers were presented on wave chirping including a paper by B.N. Breizman, which notes that wave chirping from a single frequency may emanate continuously once marginal stability conditions have been established. Another area of wide interest was the detailed study of alpha orbits in a burning plasma, where losses can come from symmetry breaking due to finite coil number or magnetic field imperfections introduced by diagnostic or test modules. An important area of development, covered by M.A. Hole and D.A. Spong, is concerned with the self

  19. Technology recommendations for pre-screening of IAEA swipe samples

    SciTech Connect

    Steeb, Jennifer L.; Smith, Nicholas A.; Lee, Denise L.; Huckabay, Heath A.; Ticknor, Brian W.

    2015-01-01

    Argonne and Oak Ridge National Laboratories have prepared an analysis of recommended, possible, and not recommended technologies for pre-screening and prioritizing IAEA swipes. The analytical techniques listed under the recommended technology list are the most promising techniques available to date. The recommended list is divided into two sections: Argonne’s recommended techniques and Oak Ridge’s recommended techniques. This list was divided based upon the expertise of staff in each subject area and/or the instrumentation available at each laboratory. The following section, titled Possible Techniques, is a list of analytical techniques that could be used for pre-screening and prioritizing swipes if additional instrumentation and effort were provided. These techniques are not necessarily top priority, but should not be discounted for future or expanded efforts. Lastly, a list of not recommended techniques is provided to outline the analytical methods and instrumentation that were investigated by each lab but deemed not suitable for this task. In addition to the recommendation list, a short procedure is provided outlining the steps followed for destructive analysis by the Network of Analytical Laboratories (NWAL) for determination of uranium concentrations, isotopic content of sample and swipe. Swipes generated for this project will be given to ORNL’s NWAL laboratory for analysis after analysis by other techniques at both laboratories.

  20. Framework for fuel-cycle approaches to IAEA safeguards

    SciTech Connect

    Fishbone, L.G.

    1986-10-01

    In order to compare several nuclear-safeguards verification approaches to one another and to the conventional facility-oriented approach, we establish a framework of the classes of information routinely verifiable by IAEA safeguards inspections. For each facility type within a State nuclear fuel cycle, the classes include flow data, inventory data, and shipper and receiver data. By showing which classes of information are verified for each facility type within three fuel cycles of different complexity, we distinguish the inspection approaches from one anoter and exhibit their fuel-cycle dependence, i.e., their need for sets of safeguards inspection activities different from those required under the facility-oriented approach at similar facilities in fuel cycles of differing complexity. Tables V-1, V-2, and V-3 graphically depict these relations and give a qualitative summary of the relative effectiveness and effort requirements of the approaches classified. The zone, information-correlation, diversion-assumption-change, and randomization-over-facilities approaches depend intrinsically on the complexity of the fuel cycle: their very definition implies fuel-cycle dependence. The approaches involving randomization over activities and goal relaxations do not have such dependence.

  1. The IAEA handbook on radionuclide transfer to wildlife.

    PubMed

    Howard, B J; Beresford, N A; Copplestone, D; Telleria, D; Proehl, G; Fesenko, S; Jeffree, R A; Yankovich, T L; Brown, J E; Higley, K; Johansen, M P; Mulye, H; Vandenhove, H; Gashchak, S; Wood, M D; Takata, H; Andersson, P; Dale, P; Ryan, J; Bollhöfer, A; Doering, C; Barnett, C L; Wells, C

    2013-07-01

    An IAEA handbook presenting transfer parameter values for wildlife has recently been produced. Concentration ratios (CRwo-media) between the whole organism (fresh weight) and either soil (dry weight) or water were collated for a range of wildlife groups (classified taxonomically and by feeding strategy) in terrestrial, freshwater, marine and brackish generic ecosystems. The data have been compiled in an on line database, which will continue to be updated in the future providing the basis for subsequent revision of the Wildlife TRS values. An overview of the compilation and analysis, and discussion of the extent and limitations of the data is presented. Example comparisons of the CRwo-media values are given for polonium across all wildlife groups and ecosystems and for molluscs for all radionuclides. The CRwo-media values have also been compared with those currently used in the ERICA Tool which represented the most complete published database for wildlife transfer values prior to this work. The use of CRwo-media values is a pragmatic approach to predicting radionuclide activity concentrations in wildlife and is similar to that used for screening assessments for the human food chain. The CRwo-media values are most suitable for a screening application where there are several conservative assumptions built into the models which will, to varying extents, compensate for the variable data quality and quantity, and associated uncertainty.

  2. IAEA-447: a new certified reference material for environmental radioactivity measurements.

    PubMed

    Shakhashiro, A; Tarjan, S; Ceccatelli, A; Kis-Benedek, G; Betti, M

    2012-08-01

    The environment program of the International Atomic Energy Agency (IAEA) includes activities to produce and certify reference materials for environmental radioactivity measurements. This paper describes methodologies applied in preparation and certification of the new IAEA-447 moss-soil certified reference material. In this work, the massic activities and associated standard uncertainties of (40)K, (90)Sr, (137)Cs, (208)Tl, (210)Pb, (210)Po, (212)Pb, (214)Pb, (214)Bi, (226)Ra, (228)Ac, (234)Th, (234)U, (238)U, (238)Pu, (239+240)Pu, (241)Pu and (241)Am were established. Details of the analytical methods including radiochemical procedures were reported. Analytical challenges and lessons learned from the reported results in the worldwide IAEA proficiency test using this material was summarized and best analytical practices to improve the performance for environmental radioactivity determinations were recommended. IAEA-447 is an important reference material for quality control and method validation of gamma-ray spectrometry and radiochemical analytical procedures.

  3. Present status and strategic plan for the stable isotope reference materials at the IAEA.

    NASA Astrophysics Data System (ADS)

    Assonov, Sergey; Groening, Manfred

    2016-04-01

    The presentation will give the overview of the stable isotope reference materials (SI-RMs) under distribution by the IAEA, its stable isotope laboratory and capacities related to material testing & production as well as future plans. Historically, most of the IAEA reference materials were produced and made available via collaborations with expert stable isotope laboratories worldwide. The IAEA plans include several directions as follows: • Maintaining the scale-defining SI-RMs at the highest level and introducing adequate replacements when needed; • Monitoring existing SI-RMs for any potential alteration(s) and of isotopic values assigned; • Identifying and then addressing the needs for new SI-RMs, with the priority to address the most critical applications (environmental and climate related applications, human health, food safety studies) and newly emerging analytical isotope techniques; • Performing all measurements aimed for characterisation of new SI-RMs and the corresponding uncertainty evaluation in accordance to the latest metrological concepts; • Promoting metrological approaches on traceability and uncertainty evaluation in every day practice of stable isotope measurements; • Expanding the IAEA capacities for SI-RMs by (i) planning a renewed laboratory at IAEA; (ii) enlarging collaboration with expert laboratories aimed to help IAEA in production and characterisation of new SI-RMs. These major directions will help to address the increasing demand for Stable Isotope Reference Materials.

  4. The US Support Program to IAEA Safeguards Priority of Containment and Surveillance

    SciTech Connect

    Diaz,R.A.

    2008-06-13

    The United States Support Program (USSP) priority for containment and surveillance (US) focuses on maintaining or improving the reliability and cost-effectiveness of C/S systems for IAEA safeguards, expanding the number of systems that are unattended and remotely monitored, and developing verification methods that help streamline the on-site inspection process. Existing IAEA C/S systems have evolved to become complex, integrated systems, which may include active seals, nondestructive assay (NDA) instruments, video cameras, and other sensors. These systems operate autonomously. They send analytical data to IAEA headquarters where it can be reviewed. These systems present challenges to the goals of improved system performance, standardization, reliability, maintainability, documentation, and cost effectiveness. One critical lesson from past experiences is the need for cooperation and common objectives among the IAEA, the developer, and the facility operator, to create a successful, cost effective system. Recent USSP C/S activities include Rokkasho Reprocessing Plant safeguard systems, production of a new shift register, numerous vulnerability assessments of C/S systems, a conduit monitoring system which identifies tampering of IAEA conduit deployed in the field, fiber optic seal upgrades, unattended monitoring system software upgrades, next generation surveillance system which will upgrade existing camera systems, and support of the IAEA's development of the universal nondestructive assay data acquisition platform.

  5. Spinal Fusion

    MedlinePlus

    ... concept of fusion is similar to that of welding in industry. Spinal fusion surgery, however, does not ... bone taken from the patient has a long history of use and results in predictable healing. Autograft ...

  6. Lessons from UNSCOM/IAEA applicable to nuclear arms control

    SciTech Connect

    Dorn, D.W.

    1995-12-05

    In early 1991, the Security Council of the United Nations tasked the Director General of the International Atomic Energy Agency, with the assistance and cooperation of the United Nations Special Commission, to oversee the destruction, removal or rendering harmless of nuclear weapons material and capabilities in Iraq. The conduct of the nuclear inspections, and the subsequent activities (identification, destruction, removal rendering harmless), have provided a wealth of experience and insight into the inspection and monitoring process as well as into the political realities of such an operation. The early inspections were conducted in an atmosphere of discovery and inexperience on both the part of the Iraqis and the IAEA and UNSCOM. As time went on, the Iraqis became more adept at hiding and obscuring relevant documents and equipment, and the inspection teams became more knowledgeable about inspection and investigative techniques, and the pre-existing Iraqi programs. A continuous monitoring presence in Iraq has now been established and an import/export monitoring regime is being developed. While steps taken to date have proven effective in inhibiting resumption of nuclear weaponization activities, it remains to be seen how effective these measures will be in the future. The external and internal conditions which led the Iraqi leadership to undertake a nuclear weaponization program have not changed, and the prognosis for the long term is uncertain. The entire process in Iraq has shown how fragile are the tools available to the international community, and how a determined proliferator can evade inspection and monitoring measures. Such measures cannot prevent nuclear proliferation, they can only hope to deter it, or, failing in that, detect it.

  7. Automated Controlled-Potential Coulometer for the IAEA

    SciTech Connect

    Cordaro, J.V.; Holland, M.K.; Fields, T.

    1998-01-29

    An automated controlled-potential coulometer has been developed at the Savannah River Site (SRS) for the determination of plutonium for use at the International Atomic Energy Agency`s (IAEA) Safeguards Analytical Laboratory in Siebersdorf, Austria. The system is functionally the same as earlier systems built for use at the Savannah River Site`s Analytical Laboratory. All electronic circuits and printed circuits boards have been upgraded with state-of-the-art components. A higher amperage potentiostat with improved control stability has been developed. The system achieves electronic calibration accuracy and linearity of better than 0.01 percent, with a precision and accuracy better than 0.1 percent has been demonstrated. This coulometer features electrical calibration of the integration system, electrolysis current background corrections, and control-potential adjustment capabilities. These capabilities allow application of the system to plutonium measurements without chemical standards, achieving traceability to the international measurement system through electrical standards and Faraday`s constant. the chemist is provided with the capability to perform measurements without depending upon chemical standards, which is a significant advantage for applications such as characterization of primary and secondary standards. Additional benefits include reducing operating cost to procure, prepare and measure calibration standards and the corresponding decrease in radioactive waste generation. The design and documentation of the automated instrument are provided herein. Each individual module`s operation, wiring, layout, and alignment are described. Interconnection of the modules and system calibration are discussed. A complete set of prints and a list of associated parts are included.

  8. Containment and surveillance -- A principal IAEA safeguards measure

    SciTech Connect

    Drayer, D.D.; Dupree, S.A.; Sonnier, C.S.

    1997-12-31

    The growth of the safeguards inspectorate of the Agency, spanning more than 40 years, has produced a variety of interesting subjects (legal, technical, political, etc.) for recollection, discussion, and study. Although the Agency was established in 1957, the first practical inspections did not occur until the early 1960s. In the early inspections, thee was little C/S equipment available, and no optical surveillance was used. However, by the third decade of the IAEA, the 1980s, many technology advances were made, and the level of C/S equipment activities increased. By the late 1980s, some 200 Twin Minolta film camera systems were deployed by the Agency for safeguards use. At the present time, the Agency is evaluating and beginning to implement remote monitoring as part of the Strengthened Safeguards System. However, adoption of remote monitoring by international agencies cannot occur rapidly because of the many technical and policy issues associated with this activity. A glimpse into the future indicates that an important element of safeguards instrumentation will be the merging of C/S and NDA equipment into integrated systems. The use of modern interior area monitors in International Safeguards also offers a great potential for advancing C/S measures. The research in microsensors is in its infancy, and the opportunities for their reducing the cost, increasing the life time, and increasing the reliability of sensors for safeguards applications are manifold. A period may be approaching in which the terminology of C/S will no longer have its original meaning, as integrated systems combining NDA instruments and C/S instruments are already in use and are expected to be the norm in the near future.

  9. Inertial fusion experiments and theory

    NASA Astrophysics Data System (ADS)

    Mima, Kunioki; Tikhonchuk, V.; Perlado, M.

    2011-09-01

    Inertial fusion research is approaching a critical milestone, namely the demonstration of ignition and burn. The world's largest high-power laser, the National Ignition Facility (NIF), is under operation at the Lawrence Livermore National Laboratory (LLNL), in the USA. Another ignition machine, Laser Mega Joule (LMJ), is under construction at the CEA/CESTA research centre in France. In relation to the National Ignition Campaign (NIC) at LLNL, worldwide studies on inertial fusion applications to energy production are growing. Advanced ignition schemes such as fast ignition, shock ignition and impact ignition, and the inertial fusion energy (IFE) technology are under development. In particular, the Fast Ignition Realization Experiment (FIREX) at the Institute of Laser Engineering (ILE), Osaka University, and the OMEGA-EP project at the Laboratory for Laser Energetics (LLE), University Rochester, and the HiPER project in the European Union (EU) for fast ignition and shock ignition are progressing. The IFE technology research and development are advanced in the frameworks of the HiPER project in EU and the LIFE project in the USA. Laser technology developments in the USA, EU, Japan and Korea were major highlights in the IAEA FEC 2010. In this paper, the status and prospects of IFE science and technology are described.

  10. IAEA SAFEGUARDS DURING PLUTONIUM STABILIZATION AT HANFORDS PLUTONIUM FINISHING PLANT (PFP)

    SciTech Connect

    MCRAE, L.P.

    2004-02-20

    The Vault at the Plutonium Finishing Plan (PFP) became subject to the International Atomic Energy Agency (IAEA) safeguards beginning in 1994 as part of the US excess fissile material program. The inventory needed to be stabilized and repackaged for long-term storage to comply with Defense Nuclear Facilities Safety Board Recommendation 94-1. In 1998, the United States began negotiations with IAEA to develop methods to maintain safeguards as this material was stabilized and repackaged. The Design Information Questionnaire was revised and submitted to the IAEA in 2002 describing how PFP would be modified to accommodate the stabilization process line. The operation plan for 2003 was submitted describing the proposed schedules for removing materials for stabilization. Stabilization and repackaging activities for the safeguarded plutonium began in January 2003 and were completed in December 2003. The safeguards approach implemented at the Hanford Site was a combination of the original baseline approach augmented by a series of five vault additions of stabilized materials followed by five removals of unstabilized materials. IAEA containment and surveillance measures were maintained until the unstabilized material was removed. Following placement of repackaged material (most from the original safeguarded stock) into the storage vault, the IAEA conducted inventory change verification measurements and then established containment and surveillance. As part of the stabilization campaign, the IAEA developed new measurement methods and calibration standards representative of the materials and packaging. The annual physical inventory verification was conducted on the normal IAEA schedule following the fourth additional/removal phase. Plant activities and the impacts on operations are described.

  11. IAEA programs in empowering the nuclear medicine profession through online educational resources.

    PubMed

    Pascual, Thomas Nb; Dondi, Maurizio; Paez, Diana; Kashyap, Ravi; Nunez-Miller, Rodolfo

    2013-05-01

    The International Atomic Energy Agency's (IAEA) programme in human health aims to enhance the capabilities in Member States to address needs related to the prevention, diagnosis, and treatment of diseases through the application of nuclear techniques. It has the specific mission of fostering the application of nuclear medicine techniques as part of the clinical management of certain types of diseases. Attuned to the continuous evolution of this specialty as well as to the advancement and diversity of methods in delivering capacity building efforts in this digital age, the section of nuclear medicine of the IAEA has enhanced its program by incorporating online educational resources for nuclear medicine professionals into its repertoire of projects to further its commitment in addressing the needs of its Member States in the field of nuclear medicine. Through online educational resources such as the Human Health Campus website, e-learning modules, and scheduled interactive webinars, a validation of the commitment by the IAEA in addressing the needs of its Member States in the field of nuclear medicine is strengthened while utilizing the advanced internet and communications technology which is progressively becoming available worldwide. The Human Health Campus (www.humanhealth.iaea.org) is the online educational resources initiative of the Division of Human Health of the IAEA geared toward enhancing professional knowledge of health professionals in radiation medicine (nuclear medicine and diagnostic imaging, radiation oncology, and medical radiation physics), and nutrition. E-learning modules provide an interactive learning environment to its users while providing immediate feedback for each task accomplished. Webinars, unlike webcasts, offer the opportunity of enhanced interaction with the learners facilitated through slide shows where the presenter guides and engages the audience using video and live streaming. This paper explores the IAEA's available online

  12. Documentation and Analysis of IAEA (International Atomic Energy Agency) Safeguards Implementation at the Exxon Nuclear Fuel Fabrication Plant.

    DTIC Science & Technology

    1984-10-01

    Those efforts also resulted in the development of innovative approaches for improving effectiveness and minimizing the cost burden. The experience showed...approaches for improving effectiveness and minimizing the cost burden. The experience showed that IAEA safeguards could be technically effective...services such as the cost of shipping the IAEA equipment to other locations in the U.S. and for providing the IAEA with working standards for use at the U.S

  13. Radioscapholunate Fusions

    PubMed Central

    McGuire, Duncan Thomas; Bain, Gregory Ian

    2012-01-01

    Radiocarpal fusions are performed for a variety of indications, most commonly for debilitating painful arthritis. The goal of a wrist fusion is to fuse the painful, diseased joints and to preserve motion through the healthy joints. Depending on the extent of the disease process, radiocarpal fusions may take the form of radiolunate, radioscapholunate, or total wrist fusions. Surgical techniques and instrumentation have advanced over the last few decades, and consequently the functional outcomes have improved and complications decreased. Techniques for partial carpal fusions have improved and now include distal scaphoid and triquetrum excision, which improves range of motion and fusion rates. In this article we discuss the various surgical techniques and fixation methods available and review the corresponding evidence in the literature. The authors' preferred surgical technique of radioscapholunate fusion with distal scaphoid and triquetrum excision is outlined. New implants and new concepts are also discussed. PMID:24179717

  14. INTERNATIONAL ATOMIC ENERGY AGENCY (IAEA) SAFEGUARDS DURING STABILIZATION AT HANFORD PLUTONIUM FINISHING PLANT (PFP)

    SciTech Connect

    MCRAE, L.P.

    2004-06-30

    The Vault at the Plutonium Finishing Plan (PFP) became subject to the International Atomic Energy Agency (IAEA) safeguards beginning in 1994 as part of the US excess fissile material program. The inventory needed to be stabilized and repackaged for long-term storage to comply with Defense Nuclear Facility Safety Board Recommendation 94-1. In 1998, the United States began negotiations with IAEA to develop methods to maintain safeguards during stabilization and repackaging of this material. The Design Information Questionnaire was revised and submitted to the IAEA in 2002 describing modification to the facility to accommodate the stabilization process line. The operation plan for 2003 was submitted describing the proposed schedules for removing materials for stabilization. Stabilization and repackaging activities for the safeguarded plutonium began in January 2003 and were completed in December 2003. The stabilization was completed in five phases. IAEA containment and surveillance measures were maintained until the material was removed by phase for stabilization and repackaging. Following placement of the repackaged material into the storage vault, the IAEA conducted inventory change verification measurements, and re-established containment and surveillance. Plant activities and the impacts on operations are described.

  15. IAEA Safeguards and technical support programs: POTAS in the 1990s

    SciTech Connect

    Kessler, C.J. . Office of Nuclear Technology and Safeguards); Reisman, A.W. )

    1991-01-01

    The US Program of Technical Assistance to IAEA Safeguards (POTAS) has since 1978 provided technology and technical assistance to the IAEA to support its nuclear safeguards activities. The present level of support, $6.9 million per year, equals 10% of the Department of Safeguards annual budget. During the next decade, the International Atomic Energy Agency (IAEA) will face new technical challenges in carrying out its verification activities. To help the IAEA acquire the technology and other technical support that it will require in the 1990s, POTAS expects to continue its assistance, both in the areas established in the past and in additional areas dictated by newly identified IAEA safeguards requirements. This paper will look at the political and policy context within which the Department of Safeguards, and hence POTAS, operates, and how that context is expected to evolve over the next decade. The roles and functions of POTAS will be identified and discussed in terms of their historical evolution. Lastly, the paper will consider how POTAS is expected to change during the 1990s, both to maintain effectiveness in existing roles and functions, and to meet the challenge of the changing policy context. 5 refs.

  16. Cooperation between SSACs/RSACs and the IAEA Under the State-Level Concept:

    SciTech Connect

    Raffo-Caiado, Ana Claudia; Johnson, Jaclyn M

    2012-01-01

    The role of State and Regional Systems of Accounting for and Control of Nuclear Materials (SSACs/RSACs) will increase within the framework of the state-level concept that is being implemented by the International Atomic Energy Agency (IAEA). In order to effectively implement the concept and further establish a state-level approach, which is sought to tailor safeguards activities in a specific state accordingly, collaboration between SSACs/RSACs and the IAEA is very important. Nevertheless, the implementation of such concept is not simple. Optimal relationship between operators and national/governmental authorities and between SSACs/RSACs and the IAEA is an evolving process. Benefits of such an approach as well as roles and responsibilities must be made clear to all parties involved. Acknowledging the uniqueness and diversity of SSACs/RSACs is a first step, followed by the implementation of confidence-building measures that result from an efficient communication process, and culminating with a transparent technical cooperation program. This paper analyses various aspects of the complex relationship among all parties involved in the implementation of the state-level concept: operators, national authorities, government agencies, SSACs/RSACs, and the IAEA. The author analyses the intricate network of possibilities to improve cooperation and discusses issues involving the provision of additional and voluntary information by SSACs/RSACs to the IAEA.

  17. Equivalency Evaluation between IAEA Safety Guidelines and Codes and Standards for Computer-Based Systems

    SciTech Connect

    Ji, S.H.; Kim, DAI. I.; Park, H.S.; Kim, B.R.; Kang, Y.D.; Oh, S.H.

    2002-07-01

    Computer based systems are used in safety related applications in safety critical applications as well as safety related applications, such as reactor protection or actuation of safety features, certain functions of the process control and monitoring system. In this context, the IAEA released the safety standard series, NS-G-1.11 (hereafter: IAEA Guideline), 'Software for Computer Based Systems Important to Safety in NPPs', in 2000 as a guideline for evaluating the software of digitalized computer based system applied in instrumentation and control system of nuclear plants. This paper discusses about the equivalency between IAEA Guideline and codes and standards adopted by Korea Institute Nuclear Safety (hereafter: KINS Guideline) as regulatory basis. (authors)

  18. Testing the validity of the International Atomic Energy Agency (IAEA) safety culture model.

    PubMed

    López de Castro, Borja; Gracia, Francisco J; Peiró, José M; Pietrantoni, Luca; Hernández, Ana

    2013-11-01

    This paper takes the first steps to empirically validate the widely used model of safety culture of the International Atomic Energy Agency (IAEA), composed of five dimensions, further specified by 37 attributes. To do so, three independent and complementary studies are presented. First, 290 students serve to collect evidence about the face validity of the model. Second, 48 experts in organizational behavior judge its content validity. And third, 468 workers in a Spanish nuclear power plant help to reveal how closely the theoretical five-dimensional model can be replicated. Our findings suggest that several attributes of the model may not be related to their corresponding dimensions. According to our results, a one-dimensional structure fits the data better than the five dimensions proposed by the IAEA. Moreover, the IAEA model, as it stands, seems to have rather moderate content validity and low face validity. Practical implications for researchers and practitioners are included.

  19. IAEA workshop and field trial at the Oak Ridge K-25 Site

    SciTech Connect

    Hembree, D.M. Jr.; Ross, H.H.; Carter, J.A.

    1995-03-01

    In March 1994, members of the International Safeguards Department in the National Security Program Office (NSPO) hosted an environmental monitoring field trial workshop for International Atomic Energy Agency (IAEA) inspectors. The workshop was held at the Oak Ridge K-25 Site and its primary purpose was to train the inspectors in the techniques needed for effective environmental sample collection and handling. The workshop emphasized both sampling theory and practice. First, detailed techniques for swipe, vegetation, soil, biota, and water-associated sampling were covered in the classroom. Subsequently, the inspectors were divided into three groups for actual sample collection in and around the K-25 locale. The collected samples were processed by the Department of Energy (DOE) Network of Analytical Laboratories using established analytical techniques. This activity is part of the IAEA ``Programme 93+2 in. assessment of measures to enhance IAEA safeguards.

  20. Fusion breeder

    SciTech Connect

    Moir, R.W.

    1982-04-20

    The fusion breeder is a fusion reactor designed with special blankets to maximize the transmutation by 14 MeV neutrons of uranium-238 to plutonium or thorium to uranium-233 for use as a fuel for fission reactors. Breeding fissile fuels has not been a goal of the US fusion energy program. This paper suggests it is time for a policy change to make the fusion breeder a goal of the US fusion program and the US nuclear energy program. The purpose of this paper is to suggest this policy change be made and tell why it should be made, and to outline specific research and development goals so that the fusion breeder will be developed in time to meet fissile fuel needs.

  1. Fusion breeder

    SciTech Connect

    Moir, R.W.

    1982-02-22

    The fusion breeder is a fusion reactor designed with special blankets to maximize the transmutation by 14 MeV neutrons of uranium-238 to plutonium or thorium to uranium-233 for use as a fuel for fission reactors. Breeding fissile fuels has not been a goal of the US fusion energy program. This paper suggests it is time for a policy change to make the fusion breeder a goal of the US fusion program and the US nuclear energy program. The purpose of this paper is to suggest this policy change be made and tell why it should be made, and to outline specific research and development goals so that the fusion breeder will be developed in time to meet fissile fuel needs.

  2. Development of an IAEA Training Course for Future U.S. Inspectors

    SciTech Connect

    Savannah Avgerinos Fitzwater; Amanda R. Rynes; David S. Bracken; Richard R. M. Metcalf; James D. West

    2011-07-01

    U.S. citizens currently make up only 12% of the positions held in the IAEA’s Department of Safeguards. While the United States has maintained a high level of support for the Agency over the duration of its history, the number of American inspectors currently in the field does not reflect this level of involvement. As a result, the National Nuclear Security Administration’s Office of International Relations, as part of the Next Generation Safeguards Initiative (NGSI) mission, has tasked Idaho National Laboratory (INL) to develop a rigorous two week hands-on training program to encourage and operationally acclimatize U.S. Citizens who are interested in applying for IAEA inspector positions using IAEA authorized equipment at INL. Idaho National Laboratory is one-of-a-kind in its ability to train IAEA inspectors by including training at nuclear facilities on site and includes, for example, direct measurement of an active spent fuel storage cooling pond. This accredited course will introduce and train attendees on the major IAEA systems used in collecting nuclear safeguards data and performing safeguards inspections. Unique in the United States, these classes will give attendees direct hands-on training and will address equipment purpose, function, operating principles, application, and troubleshooting, based upon what would be expected of an IAEA Safeguards Inspector in the field and in the office. Upon completion, U.S. applicants will be better qualified to pursue a position in the IAEA Department of Safeguards Operational Divisions. In support, INL has recently established a new laboratory space to house state of the art nuclear safeguards instrumentation. Currently, equipment installed in the laboratory space includes attended systems: 3DLR (3-D Imaging Laser) for design information verification, a Digital Cerenkov Viewing Device for measurement of spent fuel, HM-5 handheld radiation detectors, quantitative neutron and gamma systems; unattended monitoring

  3. An Australian secondary standard dosimetry laboratory participation in IAEA postal dose audits.

    PubMed

    Davies, J B; Izewska, J; Meriaty, H; Baldock, C

    2013-03-01

    For over 30 years, the International Atomic Energy Agency (IAEA) and the World Health Organization (WHO) have jointly monitored activities of secondary standard dosimetry laboratories (SSDLs) through postal dose audits with the aim of achieving consistency in dosimetry throughout the world. The Australian Nuclear Science and Technology Organisation (ANSTO) maintains an SSDL and is a member of the IAEA/WHO SSDL Network. Postal dose audit results at this Australian SSDL from 2001 to 2011 demonstrate the consistency of absorbed dose to water measurements, underpinned by the primary standard maintained at the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA).

  4. Training in Tbilisi nuclear facility provides new sampling perspectives for IAEA inspectors

    SciTech Connect

    Brim, Cornelia P.

    2016-06-08

    Office of Nonproliferation and Arms Control- (NPAC-) sponsored training in a “cold” nuclear facility in Tbilisi, Georgia provides International Atomic Energy Agency (IAEA) inspectors with a new perspective on environmental sampling strategies. Sponsored by the Nuclear Safeguards program under the NPAC, Pacific Northwest National Laboratory (PNNL) experts have been conducting an annual weeklong class for IAEA inspectors in a closed nuclear facility since 2011. The Andronikashvili Institute of Physics and the Republic of Georgia collaborate with PNNL to provide the training, and the U.S. Department of State, the U.S. Embassy in Tbilisi and the U.S. Mission to International Organizations in Vienna provide logistical support.

  5. Evaluation of IAEA Coordinated Program Steels and Welds for 288 C radiation Embrittlement Resistance.

    DTIC Science & Technology

    1982-02-01

    NRC-IN-B5528 UNCLASSIFIED NRL-MR-4655 NUREG -CR-2487T NL SMENEEEh EhhhhmmhhGIG AD -A .1 z4 Cq NUREG /CR-2487 NRL Memo Rpt 4655 m Evaluation of IAEA...3.00 and Na" al Tech 1 Infor on Servi e ingfi Id, irgi ia 1 NUREG /CR-2487 NRL Memo Rpt 4655 R5 Evaluation of IAEA Coordinated Program Steels and...reports and correspondence; Commission papers; and applicant and licensee documents and correspondence. The following documents in the NUREG series are

  6. RECRUITMENT OF U.S. CITIZENS FOR VACANCIES IN IAEA SAFEGUARDS.

    SciTech Connect

    OCCHIOGROSSO, D.; PEPPER, S.

    2006-07-16

    The International Atomic Energy Agency (IAEA) relies on its member states to assist with recruiting qualified individuals for positions within the IAEA's secretariat. It is likewise important to the U.S. government for U.S. citizens to take positions with the IAEA to contribute to its success. It is important for persons within and outside the U.S. nuclear and safeguards industries to become aware of the job opportunities available at the IAEA and to be informed of important vacancies as they arise. The International Safeguards Project Office (ISPO) at Brookhaven National Laboratory (BNL) is tasked by the U.S. government with recruiting candidates for positions within the Department of Safeguards at the IAEA and since 1998, has been actively seeking methods for improving outreach. In addition, ISPO has been working more closely with the IAEA Division of Personnel. ISPO staff members attend trade shows to distribute information about IAEA opportunities. The shows target the nuclear industry as well as shows that are unrelated to the nuclear industry. ISPO developed a web site that provides information for prospective candidates. They have worked with the IAEA to understand its recruitment processes, to make suggestions for improvements, and to understand employment benefits so they can be communicated to potential U.S. applicants. ISPO is also collaborating with a State Department working group that is focused on increasing U.S. representation within the United Nations as a whole. Most recently Secretary of State Condoleezza Rice issued a letter to all Federal Agency heads encouraging details and transfers of their employees to international organizations to the maximum extent feasible and with due regard to their manpower requirements. She urged all federal agencies to review their detail and transfer policies and practices to ensure that employment in international organizations is promoted in a positive and active manner. In addition, she wrote that it is

  7. PREFACE: 9th IAEA Technical Meeting on H-mode Physics and Transport Barriers

    NASA Astrophysics Data System (ADS)

    Groebner, Richard

    2004-05-01

    This special issue of Plasma Physics and Controlled Fusion contains invited and contributed papers presented at the 9th IAEA Technical Meeting on H-mode Physics and Transport Barriers. This meeting was held at the Catamaran Hotel in San Diego, California, on 24-26 September, 2003, and it was organized by General Atomics. As has been the tradition at the last four meetings of this series, the programme was sub-divided into six topics. For each topic there was an invited talk whose purpose was to give an overview of the topic, based on contributed papers presented at the meeting and on external results. These talks were followed by discussion periods, which were used for extended question and answer sessions for the invited speakers or for additional short presentations by contributing speakers. For each topic there was an associated poster session for contributed papers, of which there were about 70. The topics were: Structure and dynamics of internal transport barriers Structure and dynamics of the H-mode pedestal Understanding transport barriers through modelling Control of transport barriers Transport within transport barriers: theorist's view of the future Diagnostic and analysis issues for transport barriers The topics were focused on the physics of edge and core transport barriers. Similar to the previous meeting, held in Toki, Japan, the universality of this physics in axisymmetric and non-axisymmetric machines was featured. In addition, the physics of transport barriers in relation to burning plasma experiments was emphasized. In particular, one of the hopes and goals of the participants is that the physics of transport barriers can be used to enhance the prospects for burning plasmas. Because this meeting occurred approximately 21 years after the discovery of the H-mode in 1982, a special session was held to commemorate more than 20 years of research on transport barriers. In this session, Dr R Stambaugh and Professor K Itoh presented personal views on the

  8. Image fusion

    NASA Technical Reports Server (NTRS)

    Pavel, M.

    1993-01-01

    The topics covered include the following: a system overview of the basic components of a system designed to improve the ability of a pilot to fly through low-visibility conditions such as fog; the role of visual sciences; fusion issues; sensor characterization; sources of information; image processing; and image fusion.

  9. Implementation of IAEA /1/INT/054 Project in Nuclear Analytical Techniques Group of Argentina: Current State

    SciTech Connect

    Sara, Resnizky; Rita, Pla; Alba, Zaretzky

    2008-08-14

    This paper presents the implementation of the training received through the IAEA Project 'Preparation of Reference Materials and Organization of Proficiency Tests Rounds' in the Nuclear Analytical (NAT) Group of CNEA. Special emphasis is done on those activities related to the first Proficiency Test being carried out by the NAT Group.

  10. Analysis of historical delta values for IAEA/LANL NDA training courses

    SciTech Connect

    Geist, William; Santi, Peter; Swinhoe, Martyn; Bonner, Elisa

    2009-01-01

    The Los Alamos National Laboratory (LANL) supports the International Atomic Energy Agency (IAEA) by providing training for IAEA inspectors in neutron and gamma-ray Nondestructive Assay (NDA) of nuclear material. Since 1980, all new IAEA inspectors attend this two week course at LANL gaining hands-on experience in the application of NDA techniques, procedures and analysis to measure plutonium and uranium nuclear material standards with well known pedigrees. As part of the course the inspectors conduct an inventory verification exercise. This exercise provides inspectors the opportunity to test their abilities in performing verification measurements using the various NDA techniques. For an inspector, the verification of an item is nominally based on whether the measured assay value agrees with the declared value to within three times the historical delta value. The historical delta value represents the average difference between measured and declared values from previous measurements taken on similar material with the same measurement technology. If the measurement falls outside a limit of three times the historical delta value, the declaration is not verified. This paper uses measurement data from five years of IAEA courses to calculate a historical delta for five non-destructive assay methods: Gamma-ray Enrichment, Gamma-ray Plutonium Isotopics, Passive Neutron Coincidence Counting, Active Neutron Coincidence Counting and the Neutron Coincidence Collar. These historical deltas provide information as to the precision and accuracy of these measurement techniques under realistic conditions.

  11. Secretary of Energy Steven Chu speaks to the 2009 IAEA General Conference delegation

    SciTech Connect

    Secretary Chu

    2009-09-15

    On Sept. 14, 2009, U.S. Secretary of Energy Steven Chu addressed the 2009 IAEA General Conference delegation. Chu is the first Cabinet official to discuss President Obama's nuclear security and nonproliferation agenda outside the United States since the President delivered his landmark speech in Prague in April 2009.

  12. Safety of evolutionary and innovative nuclear reactors: IAEA activities and world efforts

    SciTech Connect

    Saito, T.; Gasparini, M.

    2004-07-01

    'Defence in Depth' approach constitutes the basis of the IAEA safety standards for nuclear power plants. Lessons learned from the current generation of reactors suggest that, for the next generation of reactor designs, the Defence in Depth philosophy should be retained, and that its implementation should be guided by the probabilistic insights. Recent developments in the area of general safety requirements based on Defence in Depth approach are examined and summarized. Global efforts to harmonize safety requirements for evolutionary nuclear power plants have involved many countries and organizations such as IAEA, US EPRI and European Utility EUR Organization. In recent years, developments of innovative nuclear power plants are also being discussed. The IAEA is currently developing a safety approach specifically for innovative nuclear reactors. This approach will eventually lead to a proposal of safety requirements for innovative reactors. Such activities related to safety requirements of evolutionary and innovative reactors are introduced. Various evolutionary and innovative reactor designs are reported in the world. The safety design features of evolutionary large LWRs, innovative LWRs, Modular High Temperature Gas Reactors and Small Liquid Metal Cooled LMRs are also introduced. Enhanced safety features proposed in such reactors are discussed and summarized according to the levels of Defence in Depth. For future nuclear plants, international cooperation and harmonization, especially in the area of safety, appear to be inevitable. Based on the past experience with many member states, the IAEA believes itself to be the uniquely positioned international organization to play this key role. (authors)

  13. Secretary of Energy Steven Chu speaks to the 2009 IAEA General Conference delegation

    ScienceCinema

    Secretary Chu

    2016-07-12

    On Sept. 14, 2009, U.S. Secretary of Energy Steven Chu addressed the 2009 IAEA General Conference delegation. Chu is the first Cabinet official to discuss President Obama's nuclear security and nonproliferation agenda outside the United States since the President delivered his landmark speech in Prague in April 2009.

  14. The US Support Program to IAEA Safeguards Priority of Training and Human Resources

    SciTech Connect

    Queirolo,A.

    2008-06-13

    The U.S. Support Program to IAEA Safeguards (USSP) priority of training and human resources is aimed at providing the Department of Safeguards with an appropriate mixture of regular staff and extrabudgetary experts who are qualified to meet the IAEA's technical needs and to provide personnel with appropriate instruction to improve the technical basis and specific skills needed to perform their job functions. The equipment and methods used in inspection activities are unique, complex, and evolving. New and experienced safeguards inspectors need timely and effective training to perform required tasks and to learn new skills prescribed by new safeguards policies or agreements. The role of the inspector has changed from that of strictly an accountant to include that of a detective. New safeguards procedures are being instituted, and therefore, experienced inspectors must be educated on these new procedures. The USSP also recognizes the need for training safeguards support staff, particularly those who maintain and service safeguards equipment (SGTS), and those who perform information collection and analysis (SGIM). The USSP is committed to supporting the IAEA with training to ensure the effectiveness of all staff members and will continue to offer its assistance in the development and delivery of basic, refresher, and advanced training courses. This paper will discuss the USSP ongoing support in the area of training and IAEA staffing.

  15. Opportunities to more fully utilize safeguards information reported to the IAEA at Gas Centrifuge Enrichment Plants

    SciTech Connect

    Garner, James R; Whitaker, J Michael

    2015-01-01

    In an effort to increase transparency and to strengthen IAEA safeguards, more countries are adopting practices that provide the IAEA with more timely, safeguards-relevant information to confirm nuclear operations are as declared. At Gas Centrifuge Enrichment Plants (GCEPs) potential examples include installing unattended IAEA instruments that transmit selected information back to Vienna, instruments that collect and store measurement information on-site, and daily facility operator submissions of material receipts, shipments, or utilization of key operational systems (e.g., UF6 feed stations) to on-site mail boxes. Recently the IAEA has implemented the use of on-site mailbox systems supplemented with short notice or unannounced inspections to maintain effectiveness without significantly increasing the number of inspection days. While these measures significantly improves the IAEA’s effectiveness, we have identified several opportunities for how the use of this information could be improved and how some additional information would further improve safeguards. This paper presents concepts for how the safeguards information currently collected at GCEPs could be more effectively utilized through enhancing the way that raw data is displayed visually so that it is more intuitive to the inspector and provides for more effective inspection planning and execution, comparing information with previous IAEA inspection activities (lists of previous verified inventory), through comparing data with operator supplied data when inspectors arrive (notional inventory change reports), and through evaluating the data over time to provide even greater confidence in the data and operations as declared in between inspections. This paper will also discuss several potential improvements to the submissions themselves, such as including occupancy information about product and tails stations and including weight information for each station.

  16. EDITORIAL: Safety aspects of fusion power plants

    NASA Astrophysics Data System (ADS)

    Kolbasov, B. N.

    2007-07-01

    This special issue of Nuclear Fusion contains 13 informative papers that were initially presented at the 8th IAEA Technical Meeting on Fusion Power Plant Safety held in Vienna, Austria, 10-13 July 2006. Following recommendation from the International Fusion Research Council, the IAEA organizes Technical Meetings on Fusion Safety with the aim to bring together experts to discuss the ongoing work, share new ideas and outline general guidance and recommendations on different issues related to safety and environmental (S&E) aspects of fusion research and power facilities. Previous meetings in this series were held in Vienna, Austria (1980), Ispra, Italy (1983), Culham, UK (1986), Jackson Hole, USA (1989), Toronto, Canada (1993), Naka, Japan (1996) and Cannes, France (2000). The recognized progress in fusion research and technology over the last quarter of a century has boosted the awareness of the potential of fusion to be a practically inexhaustible and clean source of energy. The decision to construct the International Thermonuclear Experimental Reactor (ITER) represents a landmark in the path to fusion power engineering. Ongoing activities to license ITER in France look for an adequate balance between technological and scientific deliverables and complying with safety requirements. Actually, this is the first instance of licensing a representative fusion machine, and it will very likely shape the way in which a more common basis for establishing safety standards and policies for licensing future fusion power plants will be developed. Now that ITER licensing activities are underway, it is becoming clear that the international fusion community should strengthen its efforts in the area of designing the next generations of fusion power plants—demonstrational and commercial. Therefore, the 8th IAEA Technical Meeting on Fusion Safety focused on the safety aspects of power facilities. Some ITER-related safety issues were reported and discussed owing to their potential

  17. Fusion Power.

    ERIC Educational Resources Information Center

    Dingee, David A.

    1979-01-01

    Discusses the extraordinary potential, the technical difficulties, and the financial problems that are associated with research and development of fusion power plants as a major source of energy. (GA)

  18. Industrial Arts for the Elementary School: 23rd Yearbook.

    ERIC Educational Resources Information Center

    Thrower, Robert G., Ed.; Weber, Robert D., Ed.

    Fourth in a series of yearbooks presenting an overview of industrial arts at the various levels of education, the yearbook clarifies the contribution of industrial arts at the elementary school level. Fifteen educators from industrial arts and related field have authored the 12 chapters of the yearbook. Chapter 1 (Mary-Margaret Scobey and Grace…

  19. NREL preprints for the 23rd IEEE Photovoltaic Specialists Conference

    SciTech Connect

    Fitzgerald, M.

    1993-05-01

    Topics covered include various aspects of solar cell fabrication and performance. Aluminium-gallium arsenides, cadmium telluride, amorphous silicon, and copper-indium-gallium selenides are all characterized in their applicability in solar cells.

  20. Minutes of the 23rd Explosives Safety Seminar, volume 1

    NASA Astrophysics Data System (ADS)

    1988-08-01

    Some topics of the conference include: Fragment hazards; Airblast interactions; Explosives risk assessment; Structural damage from blast; Demilitarization, disposal, decontamination; Quantity distance application; Fire protection - deluge systems; Debris hazards testing and analysis; Far field airblast effects and mitigation designs consideration; Electrostatic discharge (ESD); Underground explosion effects - large scale tests; Wall and window response to blast loads; Explosives facility design considerations, Accident/explosion effects; and Shock sensitivity of explosives.

  1. The SSRT in the 23rd Cycle of Solar Activity

    NASA Astrophysics Data System (ADS)

    Zandanov, V. G.; Altyntsev, A. T.; Lesovoi, S. V.

    1999-12-01

    We present a sketch of the project to upgrade the Siberian Solar Radio Telescope. We suggest expanding the spectral range of receiving frequencies from a single frequency (5.7~GHz) to five frequencies and to considerably improve the sensitivity of instrument.

  2. Council on Library Resources, Inc. 23rd Annual Report, 1979.

    ERIC Educational Resources Information Center

    Council on Library Resources, Inc., Washington, DC.

    This report describes the activities and financial status of the Council on Library Resources (CLR) during the 1978-79 fiscal year. Contents include: listings of the members of CLR, its board of directors, the council committees and officers, and the council staff; an essay on CLR's 1978-79 year and its future; program highlights; a list of…

  3. INTRODUCTION: Status report on fusion research

    NASA Astrophysics Data System (ADS)

    Burkart, Werner

    2005-10-01

    members' personal views on the latest achievements in fusion research, including magnetic and inertial confinement scenarios. The report describes fusion fundamentals and progress in fusion science and technology, with ITER as a possible partner in the realization of self-sustainable burning plasma. The importance of the socio-economic aspects of energy production using fusion power plants is also covered. Noting that applications of plasma science are of broad interest to the Member States, the report addresses the topic of plasma physics to assist in understanding the achievements of better coatings, cheaper light sources, improved heat-resistant materials and other high-technology materials. Nuclear fusion energy production is intrinsically safe, but for ITER the full range of hazards will need to be addressed, including minimising radiation exposure, to accomplish the goal of a sustainable and environmentally acceptable production of energy. We anticipate that the role of the Agency will in future evolve from supporting scientific projects and fostering information exchange to the preparation of safety principles and guidelines for the operation of burning fusion plasmas with a Q > 1. Technical progress in inertial and magnetic confinement, as well as in alternative concepts, will lead to a further increase in international cooperation. New means of communication will be needed, utilizing the best resources of modern information technology to advance interest in fusion. However, today the basis of scientific progress is still through journal publications and, with this in mind, we trust that this report will find an interested readership. We acknowledge with thanks the support of the members of the IFRC as an advisory body to the Agency. Seven chairmen have presided over the IFRC since its first meeting in 1971 in Madison, USA, ensuring that the IAEA fusion efforts were based on the best professional advice possible, and that information on fusion developments has

  4. Trip report on IAEA Training Workshop on Implementation of Integrated Management Systems for Research Reactors (T3-TR-45496).

    SciTech Connect

    Pratt, Richard J.

    2013-11-01

    From 17-21 June 2013, Sandia National Laboratories, Technical Area-V (SNL TA-V) represented the United States Department of Energy/National Nuclear Security Administration (DOE/NNSA) at the International Atomic Energy Agency (IAEA) Training Workshop (T3-TR-45486). This report gives a breakdown of the IAEA regulatory structure for those unfamiliar, and the lessons learned and observations that apply to SNL TA-V that were obtained from the workshop. The Safety Report Series, IAEA workshop final report, and SNL TA-V presentation are included as attachments.

  5. Neutron activation analysis of NBS oyster tissue (SRM 1566) and IAEA animal bone (H-5)

    SciTech Connect

    Lepel, E.A.; Laul, J.C.

    1983-10-01

    Data have been presented for 35 elements determined by INAA for NBS oyster tissue (SRM 1566) and for 38 elements determined by INAA and RNAA for IAEA animal bone (H-5). The experimental data showed excellent agreement with published values wherever the comparison exists. Additional trace-element data in the ppb range have been presented for the elements Sc, Sb, Cs, La, Ce, Nd, Sm, Eu, Tb, Dy, Ho, Yb, Lu, Hf, Ta, W and Th in NBS oyster tissue. Also, additional trace-element data for IAEA animal bone (H-5) in the ppb range for the elements Al, Sc, Co, Rb, Cs, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Tm, Yb, lu, Hf, Ta and Th have been presented.

  6. NOTE: Monte Carlo simulation of correction factors for IAEA TLD holders

    NASA Astrophysics Data System (ADS)

    Hultqvist, Martha; Fernández-Varea, José M.; Izewska, Joanna

    2010-03-01

    The IAEA standard thermoluminescent dosimeter (TLD) holder has been developed for the IAEA/WHO TLD postal dose program for audits of high-energy photon beams, and it is also employed by the ESTRO-QUALity assurance network (EQUAL) and several national TLD audit networks. Factors correcting for the influence of the holder on the TL signal under reference conditions have been calculated in the present work from Monte Carlo simulations with the PENELOPE code for 60Co γ-rays and 4, 6, 10, 15, 18 and 25 MV photon beams. The simulation results are around 0.2% smaller than measured factors reported in the literature, but well within the combined standard uncertainties. The present study supports the use of the experimentally obtained holder correction factors in the determination of the absorbed dose to water from the TL readings; the factors calculated by means of Monte Carlo simulations may be adopted for the cases where there are no measured data.

  7. The US Support Program Assistance to the IAEA Safeguards Information Technology, Collection, and Analysis 2008

    SciTech Connect

    Tackentien,J.

    2008-06-12

    One of the United States Support Program's (USSP) priorities for 2008 is to support the International Atomic Energy Agency's (IAEA) development of an integrated and efficient safeguards information infrastructure, including reliable and maintainable information systems, and effective tools and resources to collect and analyze safeguards-relevant information. The USSP has provided funding in support of this priority for the ISIS Re-engineering Project (IRP), and for human resources support to the design and definition of the enhanced information analysis architecture project (nVision). Assistance for several other information technology efforts is provided. This paper will report on the various ongoing support measures undertaken by the USSP to support the IAEA's information technology enhancements and will provide some insights into activities that the USSP may support in the future.

  8. Progresses in tritium accident modelling in the frame of IAEA EMRAS II

    SciTech Connect

    Galeriu, D.; Melintescu, A.

    2015-03-15

    The assessment of the environmental impact of tritium release from nuclear facilities is a topic of interest in many countries. In the IAEA's Environmental Modelling for Radiation Safety (EMRAS I) programme, progresses for routine releases were done and in the EMRAS II programme a dedicated working group (WG 7 - Tritium Accidents) focused on the potential accidental releases (liquid and atmospheric pathways). The progresses achieved in WG 7 were included in a complex report - a technical document of IAEA covering both liquid and atmospheric accidental release consequences. A brief description of the progresses achieved in the frame of EMRAS II WG 7 is presented. Important results have been obtained concerning washout rate, the deposition on the soil of HTO and HT, the HTO uptake by leaves and the subsequent conversion to OBT (organically bound tritium) during daylight. Further needs of the processes understanding and the experimental efforts are emphasised.

  9. Towards a tactical nuclear weapons treaty? Is There a Role of IAEA Tools of Safeguards?

    SciTech Connect

    Saunders, Emily C.; Rowberry, Ariana N.; Fearey, Bryan L.

    2012-07-12

    In recent years, there is growing interest in formal negotiations on non-strategic or tactical nuclear weapons. With the negotiations of New START, there has been much speculation that a tactical nuclear weapons treaty should be included in the follow on to New START. This paper examines the current policy environment related to tactical weapons and some of the issues surrounding the definition of tactical nuclear weapons. We then map out the steps that would need to be taken in order to begin discussions on a tactical nuclear weapons treaty. These steps will review the potential role of the IAEA in verification of a tactical nuclear weapons treaty. Specifically, does IAEA involvement in various arms control treaties serve as a useful roadmap on how to overcome some of the issues pertaining to a tactical nuclear weapons treaty?

  10. EDITORIAL: Special issue containing papers presented at the 11th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems Special issue containing papers presented at the 11th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems

    NASA Astrophysics Data System (ADS)

    Kolesnichenko, Ya.

    2010-08-01

    The history of fusion research resembles the way in which one builds skyscrapers: laying the first foundation stone, one thinks about the top of the skyscraper. At the early stages of fusion, when it became clear that the thermonuclear reactor would operate with DT plasma confined by the magnetic field, the study of the `top item'—the physics of 3.5 MeV alpha particles produced by the DT fusion reaction—was initiated. The first publications on this topic appeared as long ago as the 1960s. At that time, because the physics of alpha particles was far from the experimental demand, investigations were carried out by small groups of theoreticians who hoped to discover important and interesting phenomena in this new research area. Soon after the beginning of the work, theoreticians discovered that alpha particles could excite various instabilities in fusion plasmas. In particular, at the end of the 1960s an Alfvén instability driven by alpha particles was predicted. Later it turned out that a variety of Alfvén instabilities with very different features does exist. Instabilities with perturbations of the Alfvénic type play an important role in current experiments; it is likely that they will affect plasma performance in ITER and future reactors. The first experimental manifestation of instabilities excited by superthermal particles in fusion devices was observed in the PDX tokamak in 1983. In this device a large-scale instability—the so called `fishbone instability'—associated with ions produced by the neutral beam injection resulted in a loss of a large fraction of the injected energy. Since then, the study of energetic-ion-driven instabilities and the effects produced by energetic ions in fusion plasmas has attracted the growing attention of both experimentalists and theorists. Recognizing the importance of this topic, the first conference on fusion alpha particles was held in 1989 in Kyiv under the auspices of the IAEA. The meeting in Kyiv and several

  11. Laser fusion

    SciTech Connect

    Smit, W.A.; Boskma, P.

    1980-12-01

    Unrestricted laser fusion offers nations an opportunity to circumvent arms control agreements and develop thermonuclear weapons. Early laser weapons research sought a clean radiation-free bomb to replace the fission bomb, but this was deceptive because a fission bomb was needed to trigger the fusion reaction and additional radioactivity was induced by generating fast neutrons. As laser-implosion experiments focused on weapons physics, simulating weapons effects, and applications for new weapons, the military interest shifted from developing a laser-ignited hydrogen bomb to more sophisticated weapons and civilian applications for power generation. Civilian and military research now overlap, making it possible for several countries to continue weapons activities and permitting proliferation of nuclear weapons. These countries are reluctant to include inertial confinement fusion research in the Non-Proliferation Treaty. 16 references. (DCK)

  12. The Mailbox Computer System for the IAEA verification experiment on HEU downlending at the Portsmouth Gaseous Diffusion Plant

    SciTech Connect

    Aronson, A.L.; Gordon, D.M.

    2000-07-31

    IN APRIL 1996, THE UNITED STATES (US) ADDED THE PORTSMOUTH GASEOUS DIFFUSION PLANT TO THE LIST OF FACILITIES ELIGIBLE FOR THE APPLICATION OF INTERNATIONAL ATOMIC ENERGY AGENCY (IAEA) SAFEGUARDS. AT THAT TIME, THE US PROPOSED THAT THE IAEA CARRY OUT A ''VERIFICATION EXPERIMENT'' AT THE PLANT WITH RESPECT TO DOOWNBLENDING OF ABOUT 13 METRIC TONS OF HIGHLY ENRICHED URANIUM (HEU) IN THE FORM OF URANIUM HEXAFLUROIDE (UF6). DURING THE PERIOD DECEMBER 1997 THROUGH JULY 1998, THE IAEA CARRIED OUT THE REQUESTED VERIFICATION EXPERIMENT. THE VERIFICATION APPROACH USED FOR THIS EXPERIMENT INCLUDED, AMONG OTHER MEASURES, THE ENTRY OF PROCESS-OPERATIONAL DATA BY THE FACILITY OPERATOR ON A NEAR-REAL-TIME BASIS INTO A ''MAILBOX'' COMPUTER LOCATED WITHIN A TAMPER-INDICATING ENCLOSURE SEALED BY THE IAEA.

  13. Sections prepared for inclusion in an IAEA technical document handbook on Designing and Implementing a Physical Protection System

    SciTech Connect

    Snell, Mark K.

    2015-11-01

    Two major sections were drafted (each with several subsections) for the IAEA dealing with designing and implementing a Physical Protection System (PPS). Areas addressed were Search Systems and the evaluation of PPS effectiveness.

  14. The U.S./IAEA Workshop on Software Sustainability for Safeguards Instrumentation

    SciTech Connect

    Pepper S. E.; .; Worrall, L.; Pickett, C.; Bachner, K.; Queirolo, A.

    2014-08-08

    The U.S. National Nuclear Security Administration’s Next Generation Safeguards Initiative, the U.S. Department of State, and the International Atomic Energy Agency (IAEA) organized a a workshop on the subject of ”Software Sustainability for Safeguards Instrumentation.” The workshop was held at the Vienna International Centre in Vienna, Austria, May 6-8, 2014. The workshop participants included software and hardware experts from national laboratories, industry, government, and IAEA member states who were specially selected by the workshop organizers based on their experience with software that is developed for the control and operation of safeguards instrumentation. The workshop included presentations, to orient the participants to the IAEA Department of Safeguards software activities related to instrumentation data collection and processing, and case studies that were designed to inspire discussion of software development, use, maintenance, and upgrades in breakout sessions and to result in recommendations for effective software practices and management. This report summarizes the results of the workshop.

  15. Technical results of Y-12/IAEA field trial of remote monitoring system

    SciTech Connect

    Corbell, B.H.; Whitaker, J.M.; Welch, J.

    1997-08-01

    A Remote Monitoring System (RMS) field trial has been conducted with the International Atomic Energy Agency (IAEA) on highly enriched uranium materials in a vault at the Oak Ridge Y-12 Plant. The RMS included a variety of Sandia, Oak Ridge, and Aquila sensor technologies which provide containment seals, video monitoring, radiation asset measurements, and container identification data to the on-site DAS (Data Acquisition System) by way of radio-frequency and Echelon LonWorks networks. The accumulated safeguards information was transmitted to the IAEA via satellite (COMSAT/RSI) and international telephone lines. The technologies tested in the remote monitoring environment are the RadCouple, RadSiP, and SmartShelf sensors from the ORSENS (Oak Ridge Sensors for Enhancing Nuclear Safeguards) technologies; the AIMS (Authenticated Item Monitoring System) motion sensor (AMS), AIMS fiber-optic seal (AFOS), ICAM (Image Compression and Authentication Module) video surveillance system, DAS (Data Acquisition System), and DIRS (Data and Image Review Station) from Sandia; and the AssetLAN identification tag, VACOSS-S seal, and Gemini digital surveillance system from Aquila. The field trial was conducted from October 1996 through May 1997. Tests were conducted during the monthly IAEA Interim Inventory Verification (IIV) inspections for evaluation of the equipment. Experience gained through the field trials will allow the technologies to be applied to various monitoring scenarios.

  16. Preliminary considerations on developing IAEA technical safeguards for LMFBR power systems

    SciTech Connect

    Persiani, P. J.

    1980-09-01

    Nuclear fuel cycles safeguards should be considered in the dynamic context of a world deployment of various reactor types and varying availability of fuel-cycle services. There will be a close interaction between thermal-reactor cycles and the future deployment of fast breeders. The quantitites of plutonium and the reprocessing, conversion, fabrication, and storage methods of the fuel for the fast breeders will have a significant impact on safeguards techniques. The approach to the fast breeder fuel cycle safeguards follows the general safeguards system approach proposed by the IAEA. Objective of IAEA safeguards is the detection of diversion of nuclear material and deterrence of such diversion. To achieve independent verification of material balance accountancy requires the capability to monitor inventory status and verify material flows and quantities of all nuclear materials subject to safeguards. Containment and surveillance measures are applied to monitor key measurement points, maintain integrity of material balance, and complement material accountancy. The safeguards study attempts to develop a generic reference IAEA Safeguards System and explores various system options using containment/surveillance and material accountancy instrumentation and integrated systems designs.

  17. A comparison of the PARET/ANL and RELAP5/MOD3 codes for the analysis of IAEA benchmark transients

    SciTech Connect

    Woodruff, W.L.; Hanan, N.A.; Smith, R.S.; Matos, J.E.

    1996-12-31

    The PARET/ANL and RELAP5/MOD3 codes are used to analyze the series of benchmark transients specified for the IAEA Research Reactor Core Conversion Guidebook (IAEA-TECDOC-643, Vol. 3). The computed results for these loss-of-flow and reactivity insertion transients with scram are in excellent agreement and agree well with the earlier results reported in the guidebook. Attempts to also compare RELAP5/MOD3 with the SPERT series of experiments are in progress.

  18. Spinal fusion

    MedlinePlus

    Liu G, Wong HK. Laminectomy and fusion. In: Shen FH, Samartzis D, Fessler RG, eds. Textbook of the Cervical Spine . Philadelphia, PA: Elsevier Saunders; 2015:chap 34. Wood GW. Arthrodesis of the spine. In: Canale ST, Beaty JH, eds. Campbell's Operative ...

  19. IAEA Inspections for Undeclared and Declared Activities: Is a More Robust Approach Needed?

    SciTech Connect

    Mark Schanfein

    2009-07-01

    The United States has long supported a strong international safeguards system and for many years has served as the foremost supplier of technology, equipment, and training to the International Atomic Energy Agency (IAEA). In doing so, it drew in many instances on DOE sponsored R&D and training that was directed towards domestic safeguards and then adapted for IAEA purposes. This was relatively straightforward because of the strong overlap between the development of nuclear material accountancy measures needed for both domestic and international purposes. Two factors have emerged that have made this strong reliance on domestic measures less and less able to be a source of support for the IAEA. One is the shift by the IAEA safeguards system towards detecting undeclared activities. The second is the shift of domestic attention away from nuclear material accountancy and towards physical protection. As a result, a gap in US sponsored R&D and training relevant to international safeguards has developed. The NNSA Next Generation Safeguards Initiative and the DOE NA-22 Safeguards R&D program are intended to help fill this gap and, thereby, permit the U.S. to remain as the pre-eminent supplier of technology for international safeguards purposes. In this context, IAEA challenges have been examined from the perspective of detecting the diversion of nuclear material from declared stocks; detecting undeclared production of nuclear material and activities at locations declared under INFCIRC/153; and detecting undeclared nuclear material and activities elsewhere in a state. Of these, the detection of undeclared nuclear material and activities is, perhaps, the IAEA’s most significant challenge. It is a challenge that even the international community finds difficult to meet because of the scope and the geographic scale of the problem, the technical constraints, the knowledge required, and the significant resources needed to deploy effective systems world-wide (e.g., satellite

  20. Overview of the RFX fusion science program

    NASA Astrophysics Data System (ADS)

    Martin, P.; Adamek, J.; Agostinetti, P.; Agostini, M.; Alfier, A.; Angioni, C.; Antoni, V.; Apolloni, L.; Auriemma, F.; Barana, O.; Barison, S.; Baruzzo, M.; Bettini, P.; Boldrin, M.; Bolzonella, T.; Bonfiglio, D.; Bonomo, F.; Boozer, A. H.; Brombin, M.; Brotankova, J.; Buffa, A.; Canton, A.; Cappello, S.; Carraro, L.; Cavazzana, R.; Cavinato, M.; Chacon, L.; Chitarin, G.; Cooper, W. A.; Dal Bello, S.; Dalla Palma, M.; Delogu, R.; De Lorenzi, A.; De Masi, G.; Dong, J. Q.; Drevlak, M.; Escande, D. F.; Fantini, F.; Fassina, A.; Fellin, F.; Ferro, A.; Fiameni, S.; Fiorentin, A.; Franz, P.; Gaio, E.; Garbet, X.; Gazza, E.; Giudicotti, L.; Gnesotto, F.; Gobbin, M.; Grando, L.; Guo, S. C.; Hirano, Y.; Hirshman, S. P.; Ide, S.; Igochine, V.; In, Y.; Innocente, P.; Kiyama, S.; Liu, S. F.; Liu, Y. Q.; Lòpez Bruna, D.; Lorenzini, R.; Luchetta, A.; Manduchi, G.; Mansfield, D. K.; Marchiori, G.; Marcuzzi, D.; Marrelli, L.; Martini, S.; Matsunaga, G.; Martines, E.; Mazzitelli, G.; McCollam, K.; Menmuir, S.; Milani, F.; Momo, B.; Moresco, M.; Munaretto, S.; Novello, L.; Okabayashi, M.; Ortolani, S.; Paccagnella, R.; Pasqualotto, R.; Pavei, M.; Perverezev, G. V.; Peruzzo, S.; Piovan, R.; Piovesan, P.; Piron, L.; Pizzimenti, A.; Pomaro, N.; Pomphrey, N.; Predebon, I.; Puiatti, M. E.; Rigato, V.; Rizzolo, A.; Rostagni, G.; Rubinacci, G.; Ruzzon, A.; Sakakita, H.; Sanchez, R.; Sarff, J. S.; Sattin, F.; Scaggion, A.; Scarin, P.; Schneider, W.; Serianni, G.; Sonato, P.; Spada, E.; Soppelsa, A.; Spagnolo, S.; Spolaore, M.; Spong, D. A.; Spizzo, G.; Takechi, M.; Taliercio, C.; Terranova, D.; Toigo, V.; Valisa, M.; Veranda, M.; Vianello, N.; Villone, F.; Wang, Z.; White, R. B.; Yadikin, D.; Zaccaria, P.; Zamengo, A.; Zanca, P.; Zaniol, B.; Zanotto, L.; Zilli, E.; Zollino, G.; Zuin, M.

    2011-09-01

    This paper summarizes the main achievements of the RFX fusion science program in the period between the 2008 and 2010 IAEA Fusion Energy Conferences. RFX-mod is the largest reversed field pinch in the world, equipped with a system of 192 coils for active control of MHD stability. The discovery and understanding of helical states with electron internal transport barriers and core electron temperature >1.5 keV significantly advances the perspectives of the configuration. Optimized experiments with plasma current up to 1.8 MA have been realized, confirming positive scaling. The first evidence of edge transport barriers is presented. Progress has been made also in the control of first-wall properties and of density profiles, with initial first-wall lithization experiments. Micro-turbulence mechanisms such as ion temperature gradient and micro-tearing are discussed in the framework of understanding gradient-driven transport in low magnetic chaos helical regimes. Both tearing mode and resistive wall mode active control have been optimized and experimental data have been used to benchmark numerical codes. The RFX programme also provides important results for the fusion community and in particular for tokamaks and stellarators on feedback control of MHD stability and on three-dimensional physics. On the latter topic, the result of the application of stellarator codes to describe three-dimensional reversed field pinch physics will be presented.

  1. Special issue containing papers presented at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (7-11 September 2011) Special issue containing papers presented at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (7-11 September 2011)

    NASA Astrophysics Data System (ADS)

    Berk, H. L.

    2012-09-01

    The topic of the behaviour of energetic alpha particles in magnetic fusion confined plasmas is perhaps the ultimate frontier plasma physics issue that needs to be understood in the quest to achieve controlled power from the fusion reaction in magnetically confined plasmas. The partial pressure of alpha particles in a burning plasma will be ~5-10% of the total pressure and under these conditions the alpha particles may be prone to develop instability through Alfvénic interaction. This may lead, even with moderate alpha particle loss, to a burn quench or severe wall damage. Alternatively, benign Alfvénic signals may allow the vital information to control a fusion burn. The significance of this issue has led to extensive international investigations and a biannual meeting that began in Kyiv in 1989, followed by subsequent meetings in Aspenäs (1991), Trieste (1993), Princeton (1995), JET/Abingdon (1997), Naka (1999), Gothenburg (2001), San Diego (2003), Takayama (2005), Kloster Seeon (2007) and Kyiv (2009). The meeting was initially entitled 'Alpha Particles in Fusion Research' and then was changed during the 1997 meeting to 'Energetic Particles in Magnetic Confinement Systems' in appreciation of the need to study the significance of the electron runaway, which can lead to the production of energetic electrons with energies that can even exceed the energy produced by fusion products. This special issue presents some of the mature interesting work that was reported at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems, which was held in Austin, Texas, USA (7-11 September 2011). This meeting immediately followed a related meeting, the 5th IAEA Technical Meeting on Theory of Plasma Wave Instabilities (5-7 September 2011). The meetings shared one day (7 September 2011) with presentations relevant to both groups. The presentations from most of the participants, as well as some preliminary versions of papers, are available at the

  2. Cold fusion, Alchemist's dream

    SciTech Connect

    Clayton, E.D.

    1989-09-01

    In this report the following topics relating to cold fusion are discussed: muon catalysed cold fusion; piezonuclear fusion; sundry explanations pertaining to cold fusion; cosmic ray muon catalysed cold fusion; vibrational mechanisms in excited states of D{sub 2} molecules; barrier penetration probabilities within the hydrogenated metal lattice/piezonuclear fusion; branching ratios of D{sub 2} fusion at low energies; fusion of deuterons into {sup 4}He; secondary D+T fusion within the hydrogenated metal lattice; {sup 3}He to {sup 4}He ratio within the metal lattice; shock induced fusion; and anomalously high isotopic ratios of {sup 3}He/{sup 4}He.

  3. Department of Energy Efforts to Promote Universal Adherence to the IAEA Additional Protocol

    SciTech Connect

    Killinger, Mark H.; Hansen, Linda H.; Kovacic, Don N.; VanSickle, Matthew; Apt, Kenneth E.

    2009-10-06

    Entry-into-force of the U.S. Additional Protocol (AP) in January 2009 continues to demonstrate the ongoing commitment by the United States to promote universal adherence to the AP. The AP is a critical tool for improving the International Atomic Energy Agency’s (IAEA) capabilities to detect undeclared activities that indicate a clandestine nuclear weapons program. This is because States Parties are required to provide information about, and access to, nuclear fuel cycle activities beyond their traditional safeguards reporting requirements. As part of the U.S. AP Implementation Act and Senate Resolution of Ratification, the Administration is required to report annually to Congress on measures taken to achieve the adoption of the AP in non-nuclear weapon states, as well as assistance to the IAEA to promote the effective implementation of APs in those states. A key U.S. effort in this area is being managed by the International Nuclear Safeguards and Engagement Program (INSEP) of the U.S. Department of Energy (DOE). Through new and existing bilateral cooperation agreements, INSEP has initiated technical assistance projects for AP implementation with selected non-weapon states. States with which INSEP is currently cooperating include Vietnam and Thailand, with Indonesia, Algeria, Morocco, and other countries as possible future collaborators in the area of AP implementation. The INSEP collaborative model begins with a joint assessment with our partners to identify specific needs they may have regarding entering the AP into force and any impediments to successful implementation. An action plan is then developed detailing and prioritizing the necessary joint activities. Such assistance may include: advice on developing legal frameworks and regulatory documents; workshops to promote understanding of AP requirements; training to determine possible declarable activities; assistance in developing a system to collect and submit declarations; performing industry outreach to

  4. International contributions to IAEA-NEA heat transfer databases for supercritical fluids

    SciTech Connect

    Leung, L. K. H.; Yamada, K.

    2012-07-01

    An IAEA Coordinated Research Project on 'Heat Transfer Behaviour and Thermohydraulics Code Testing for SCWRs' is being conducted to facilitate collaboration and interaction among participants from 15 organizations. While the project covers several key technology areas relevant to the development of SCWR concepts, it focuses mainly on the heat transfer aspect, which has been identified as the most challenging. Through the collaborating effort, large heat-transfer databases have been compiled for supercritical water and surrogate fluids in tubes, annuli, and bundle subassemblies of various orientations over a wide range of flow conditions. Assessments of several supercritical heat-transfer correlations were performed using the complied databases. The assessment results are presented. (authors)

  5. Reference Material for Radionuclides in Sediment, IAEA-384 (Fangataufa Lagoon Sediment)

    SciTech Connect

    Povinec, P; Pham, M; Barci-Funel, G; Bojanawski, R; Boshkova, T; Burnett, W; Carvalho, F; Chapeyron, B; Cunha, I; Dahlgaard, H; Galabov, N; Gastaud, J; Geering, J; Gomez, I; Green, N; Hamilton, T; Ibanez, F; Majah, M I; John, M; Kanisch, G; Kenna, T; Kloster, M; Korun, M; Wee Kwong, L L; La Rosa, J; Lee, S; Levy-Palomo, I; Malatova, M; Maruo, Y; Mitchell, P; Murciano, I; Nelson, R; Oh, J; Oregioni, B; Petit, G L; Pettersson, H; Reineking, A; Smedley, P; Suckow, A; der Struijs, T v; Voors, P; Yoshimizu, K; Wyse, E

    2005-09-23

    The IAEA Marine Environment Laboratory (IAEA-MEL) in Monaco has conducted intercomparison exercises on radionuclides in marine samples for many years as part of its contribution to the IAEA's program of Analytical Quality Control Services (AQCS). An important part of the AQCS program has been a production of Reference Materials (RMs) and their provision to radioanalytical laboratories. The RMs have been developed for different marine matrices (sediment, water, biota), with accuracy and precision required for the present state of the art of radiometrics and mass spectrometry methods. The RMs have been produced as the final products of world-wide intercomparison exercises organized during last 30 years. A total of 44 intercomparison exercises were undertaken and 39 RMs were produced for radionuclides in the marine environment. All required matrices (seawater, biota, sediment) have been covered with radionuclide concentrations ranging from typical environmental levels to elevated levels affected by discharges from nuclear reprocessing plants. The long-term availability of RMs (over 10 years) requires the use of very specific techniques to collect and pretreat large quantities of material (e.g., in excess of 100 kg) in order to ensure sample stability and homogenization of any analytes of interest. The production of a RM is therefore a long process, covering the identification of needs, sample collection, pre-treatment, homogenization, bottling, distribution to laboratories, evaluation of data, preliminary reporting, additional analyses in expert laboratories, certification of the material, and finally issuing the RM. In this paper we describe a reference material IAEA-384, Fangataufa lagoon sediment, designed for determination of anthropogenic and natural radionuclides in the marine environment. This RM has been prepared with the aim of testing the performance of analytical laboratories to measure the activity of these radionuclides in a sediment sample contaminated

  6. Implementation of the IAEA Additional Protocol in the Philippines: USDOE/PNRI Cooperation

    SciTech Connect

    Sequis, Julietta E.; Cain, Ronald A.; Burbank, Roberta L.; Hansen, Linda H.; VanSickle, Matthew; Killinger, Mark H.; Elkhamri, Oksana O.

    2011-07-19

    The Philippines entered into force the International Atomic Energy Agency (IAEA) Additional Protocol (AP) in February 2010. The Philippine Nuclear Research Institute (PNRI) is the government agency responsible for implementing the AP. In June 2010 the IAEA invited the U.S. Department of Energy (DOE) to help conduct a joint national training seminar on the AP. DOE presented to PNRI its AP international technical assistance program, administered by the International Nuclear Safeguards and Engagement Program (INSEP), which helps partner countries implement the AP. In coordination with the IAEA, DOE established this program in 2008 to complement IAEA AP seminars with long-term country-specific cooperation from the perspective of a Member State. The US version of the AP is the same version as that of non-nuclear weapon states except for the addition of a national security exclusion. Due to this, DOE cooperation with other countries enables the sharing of valuable lessons learned in implementing the AP. DOE/INSEP described to PNRI the various areas of cooperation it offers to interested countries, whether they are preparing for entry into force or already implementing the AP. Even countries that have entered the AP into force are sometimes not fully prepared to implement it well, and welcome cooperation to improve their implementation process. PNRI and DOE/INSEP subsequently agreed to cooperate in several areas to enhance the efficiency and effectiveness of the Philippines AP implementation. These areas include providing working-level training to PNRI staff and preparing an information document that details that training for future reference, assisting with the development of an outreach program and procedures for AP reporting and complementary access, and identifying Annex II equipment and non-nuclear materials whose export must be reported under the AP. DOE laboratory representatives, funded by INSEP, met again with PNRI in February 2011 to provide training for PNRI AP

  7. Engineering design point for a 1MW fusion neutron source

    NASA Astrophysics Data System (ADS)

    Sieck, Paul; Melnik, Paul; Woodruff, Simon; Stuber, James; Romero-Talamas, Carlos; O'Bryan, John; Miller, Ronald

    2016-10-01

    Compact fusion neutron sources are currently serving important roles in medical isotope production, and could be used for waste transmutation if sufficient fluence can be attained. The engineering design point for a compact neutron source with target rateof e17n/sbased on the adiabatic compression of a spheromak is presented. The compression coils and passive structure are designed to maintain stability during compression. The power supplies consist of 4 separate banks of MJ each; Pspice simulations and power requirement calculations will be shown. We outline the diagnostic set that will be required for an experimental campaign to address issues relating to both formation efficiency and energy confinement scaling during compression. Work supported in part by DARPA Grant N66001-14-1-4044 and IAEA CRP on compac fusion neutron sources.

  8. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Argentina.

    PubMed

    Kairiyama, Eulogia; Morales Pedraza, Jorge

    2009-05-01

    Tissue banking activities in Argentina started in 1993. The regulatory and controlling national authority on organ, tissue and cells for transplantation activity is the National Unique Coordinating Central Institute for Ablation and Implant (INCUCAI). Three tissue banks were established under the IAEA program and nine other banks participated actively in the implementation of this program. As result of the implementation of the IAEA program in Argentina and the work done by the established tissue banks, more and more hospitals are now using, in a routine manner, radiation sterilised tissues processed by these banks. During the period 1992-2005, more than 21 016 tissues were produced and irradiated in the tissue banks participating in the IAEA program. Within the framework of the training component of the IAEA program, Argentina has been selected to host the Regional Training Centre for Latin American. In this centre, tissue bank operators and medical personal from Latin American countries were trained. Since 1999, Argentina has organised four regular regional training courses and two virtual regional training courses. More than twenty (20) tissue bank operators and medical personnel from Argentina were trained under the IAEA program in the six courses organised in the country. In general, ninety (96) tissue bank operators and medical personnel from eight Latin-American countries were trained in the Buenos Aires regional training centre. From Argentina 16 students graduated in these courses.

  9. Overview of the RFX-mod fusion science programme

    NASA Astrophysics Data System (ADS)

    Martin, P.; Puiatti, M. E.; Agostinetti, P.; Agostini, M.; Alonso, J. A.; Antoni, V.; Apolloni, L.; Auriemma, F.; Avino, F.; Barbalace, A.; Barbisan, M.; Barbui, T.; Barison, S.; Barp, M.; Baruzzo, M.; Bettini, P.; Bigi, M.; Bilel, R.; Boldrin, M.; Bolzonella, T.; Bonfiglio, D.; Bonomo, F.; Brombin, M.; Buffa, A.; Bustreo, C.; Canton, A.; Cappello, S.; Carralero, D.; Carraro, L.; Cavazzana, R.; Chacon, L.; Chapman, B.; Chitarin, G.; Ciaccio, G.; Cooper, W. A.; Dal Bello, S.; Dalla Palma, M.; Delogu, R.; De Lorenzi, A.; Delzanno, G. L.; De Masi, G.; De Muri, M.; Dong, J. Q.; Escande, D. F.; Fantini, F.; Fasoli, A.; Fassina, A.; Fellin, F.; Ferro, A.; Fiameni, S.; Finn, J. M.; Finotti, C.; Fiorentin, A.; Fonnesu, N.; Framarin, J.; Franz, P.; Frassinetti, L.; Furno, I.; Furno Palumbo, M.; Gaio, E.; Gazza, E.; Ghezzi, F.; Giudicotti, L.; Gnesotto, F.; Gobbin, M.; Gonzales, W. A.; Grando, L.; Guo, S. C.; Hanson, J. D.; Hidalgo, C.; Hirano, Y.; Hirshman, S. P.; Ide, S.; In, Y.; Innocente, P.; Jackson, G. L.; Kiyama, S.; Liu, S. F.; Liu, Y. Q.; Lòpez Bruna, D.; Lorenzini, R.; Luce, T. C.; Luchetta, A.; Maistrello, A.; Manduchi, G.; Mansfield, D. K.; Marchiori, G.; Marconato, N.; Marcuzzi, D.; Marrelli, L.; Martini, S.; Matsunaga, G.; Martines, E.; Mazzitelli, G.; McCollam, K.; Momo, B.; Moresco, M.; Munaretto, S.; Novello, L.; Okabayashi, M.; Olofsson, E.; Paccagnella, R.; Pasqualotto, R.; Pavei, M.; Peruzzo, S.; Pesce, A.; Pilan, N.; Piovan, R.; Piovesan, P.; Piron, C.; Piron, L.; Pomaro, N.; Predebon, I.; Recchia, M.; Rigato, V.; Rizzolo, A.; Roquemore, A. L.; Rostagni, G.; Ruzzon, A.; Sakakita, H.; Sanchez, R.; Sarff, J. S.; Sartori, E.; Sattin, F.; Scaggion, A.; Scarin, P.; Schneider, W.; Serianni, G.; Sonato, P.; Spada, E.; Soppelsa, A.; Spagnolo, S.; Spolaore, M.; Spong, D. A.; Spizzo, G.; Takechi, M.; Taliercio, C.; Terranova, D.; Theiler, C.; Toigo, V.; Trevisan, G. L.; Valente, M.; Valisa, M.; Veltri, P.; Veranda, M.; Vianello, N.; Villone, F.; Wang, Z. R.; White, R. B.; Xu, X. Y.; Zaccaria, P.; Zamengo, A.; Zanca, P.; Zaniol, B.; Zanotto, L.; Zilli, E.; Zollino, G.; Zuin, M.

    2013-10-01

    This paper reports the highlights of the RFX-mod fusion science programme since the last 2010 IAEA Fusion Energy Conference. The RFX-mod fusion science programme focused on two main goals: exploring the fusion potential of the reversed field pinch (RFP) magnetic configuration and contributing to the solution of key science and technology problems in the roadmap to ITER. Active control of several plasma parameters has been a key tool in this endeavour. New upgrades on the system for active control of magnetohydrodynamic (MHD) stability are underway and will be presented in this paper. Unique among the existing fusion devices, RFX-mod has been operated both as an RFP and as a tokamak. The latter operation has allowed the exploration of edge safety factor qedge < 2 with active control of MHD stability and studies concerning basic energy and flow transport mechanisms. Strong interaction has continued with the stellarator community in particular on the physics of helical states and on three-dimensional codes.

  10. International Conference on Advances in Radiation Oncology (ICARO): outcomes of an IAEA meeting.

    PubMed

    Salminen, Eeva K; Kiel, Krystyna; Ibbott, Geoffrey S; Joiner, Michael C; Rosenblatt, Eduardo; Zubizarreta, Eduardo; Wondergem, Jan; Meghzifene, Ahmed

    2011-02-04

    The IAEA held the International Conference on Advances in Radiation Oncology (ICARO) in Vienna on 27-29 April 2009. The Conference dealt with the issues and requirements posed by the transition from conventional radiotherapy to advanced modern technologies, including staffing, training, treatment planning and delivery, quality assurance (QA) and the optimal use of available resources. The current role of advanced technologies (defined as 3-dimensional and/or image guided treatment with photons or particles) in current clinical practice and future scenarios were discussed.ICARO was organized by the IAEA at the request of the Member States and co-sponsored and supported by other international organizations to assess advances in technologies in radiation oncology in the face of economic challenges that most countries confront. Participants submitted research contributions, which were reviewed by a scientific committee and presented via 46 lectures and 103 posters. There were 327 participants from 70 Member States as well as participants from industry and government. The ICARO meeting provided an independent forum for the interaction of participants from developed and developing countries on current and developing issues related to radiation oncology.

  11. International Atomic Energy Agency (IAEA) Coordinated Research Projects on Structural Integrity of Reactor Pressure Vessels

    SciTech Connect

    Server, W. L.; Nanstad, Randy K

    2009-01-01

    The International Atomic Energy Agency (IAEA) has conducted a series of Coordinated Research Projects (CRPs) that have focused on irradiated reactor pressure vessel (RPV) steel fracture toughness properties and approaches for assuring structural integrity of RPVs throughout operating life. A series of nine CRPs have been sponsored by the IAEA, starting in the early 1970s, focused on neutron radiation effects on RPV steels. The purpose of the CRPs was to develop comparisons and correlations to test the uniformity of irradiated results through coordinated international research studies and data sharing. Consideration of dose rate effects, effects of alloying (nickel, manganese, silicon, etc.) and residual elements (eg., copper and phosphorus), and drop in upper shelf toughness are also important for assessing neutron embrittlement effects. The ultimate use of embrittlement understanding is assuring structural integrity of the RPV under current and future operation and accident conditions. Material fracture toughness is the key ingredient needed for this assessment, and many of the CRPs have focused on measurement and application of irradiated fracture toughness. This paper presents an overview of the progress made since the inception of the CRPs in the early 1970s. The chronology and importance of each CRP have been reviewed and put into context for continued and long-term safe operation of RPVs.

  12. International Conference on Advances in Radiation Oncology (ICARO): Outcomes of an IAEA Meeting

    PubMed Central

    2011-01-01

    The IAEA held the International Conference on Advances in Radiation Oncology (ICARO) in Vienna on 27-29 April 2009. The Conference dealt with the issues and requirements posed by the transition from conventional radiotherapy to advanced modern technologies, including staffing, training, treatment planning and delivery, quality assurance (QA) and the optimal use of available resources. The current role of advanced technologies (defined as 3-dimensional and/or image guided treatment with photons or particles) in current clinical practice and future scenarios were discussed. ICARO was organized by the IAEA at the request of the Member States and co-sponsored and supported by other international organizations to assess advances in technologies in radiation oncology in the face of economic challenges that most countries confront. Participants submitted research contributions, which were reviewed by a scientific committee and presented via 46 lectures and 103 posters. There were 327 participants from 70 Member States as well as participants from industry and government. The ICARO meeting provided an independent forum for the interaction of participants from developed and developing countries on current and developing issues related to radiation oncology. PMID:21294881

  13. The Fusion Energy Option

    NASA Astrophysics Data System (ADS)

    Dean, Stephen O.

    2004-06-01

    Presentations from a Fusion Power Associates symposium, The Fusion Energy Option, are summarized. The topics include perspectives on fossil fuel reserves, fusion as a source for hydrogen production, status and plans for the development of inertial fusion, planning for the construction of the International Thermonuclear Experimental Reactor, status and promise of alternate approaches to fusion and the need for R&D now on fusion technologies.

  14. Diversion analysis and safeguards measures for liquid-metal fast-breeder reactors. Paper IAEA-SM-260/6

    SciTech Connect

    Persiani, P.J.; Ermakov, S.V.

    1982-01-01

    The objective of the study is to perform a diversion analysis and an assessment of the available safeguards methods and systems for verifying inventory and flow of nuclear material in accessible and inaccessible areas of liquid-metal fast breeder reactor, LMFBR, systems. The study focuses primarily on the assembly-handling operations, assembly storage facilities, and reactor operations facilities relating to experimental, demonstration and prototypal reactor plants. The safeguards systems and methods presented are considered to be feasible for development and implementation within the resource limitation of the IAEA and are considered to be consistent with the objectives, requirements, and constraints of the IAEA documents INFCIRC/153 and INFCIRC/66-Rev-2.

  15. Analysis of IAEA Environmental Samples for Plutonium and Uranium by ICP/MS in Support Of International Safeguards

    SciTech Connect

    Farmer, Orville T.; Olsen, Khris B.; Thomas, May-Lin P.; Garofoli, Stephanie J.

    2008-05-01

    A method for the separation and determination of total and isotopic uranium and plutonium by ICP-MS was developed for IAEA samples on cellulose-based media. Preparation of the IAEA samples involved a series of redox chemistries and separations using TRU® resin (Eichrom). The sample introduction system, an APEX nebulizer (Elemental Scientific, Inc), provided enhanced nebulization for a several-fold increase in sensitivity and reduction in background. Application of mass bias (ALPHA) correction factors greatly improved the precision of the data. By combining the enhancements of chemical separation, instrumentation and data processing, detection levels for uranium and plutonium approached high attogram levels.

  16. Revitalizing Fusion via Fission Fusion

    NASA Astrophysics Data System (ADS)

    Manheimer, Wallace

    2001-10-01

    Existing tokamaks could generate significant nuclear fuel. TFTR, operating steady state with DT might generate enough fuel for a 300 MW nuclear reactor. The immediate goals of the magnetic fusion program would necessarily shift from a study of advanced plasma regimes in larger sized devices, to mostly known plasmas regimes, but at steady state or high duty cycle operation in DT plasmas. The science and engineering of breeding blankets would be equally important. Follow on projects could possibly produce nuclear fuel in large quantity at low price. Although today there is strong opposition to nuclear power in the United States, in a 21st century world of 10 billion people, all of whom will demand a middle class life style, nuclear energy will be important. Concern over greenhouse gases will also drive the world toward nuclear power. There are studies indicating that the world will need 10 TW of carbon free energy by 2050. It is difficult to see how this can be achieved without the breeding of nuclear fuel. By using the thorium cycle, proliferation risks are minimized. [1], [2]. 1 W. Manheimer, Fusion Technology, 36, 1, 1999, 2.W. Manheimer, Physics and Society, v 29, #3, p5, July, 2000

  17. Nuclear Fusion Award 2010 speech Nuclear Fusion Award 2010 speech

    NASA Astrophysics Data System (ADS)

    Rice, John

    2011-01-01

    Alex Ince-Cushman, John deGrassie, Lars-Goran Eriksson, Yoshiteru Sakamoto, Andrea Scarabosio and Yuri Podpaly, as well as the other coauthors. I would like to express my sincere appreciation to Earl Marmar, Martin Greenwald and Miklos Porkolab at MIT for continued support of this work, as well as to the entire C-Mod team. This award was made possible due to the insight of Mitsuru Kikuchi and the support of the IAEA through Werner Burkhart, and I am truly grateful to both of them. Many thanks as well to the outstanding staff at Nuclear Fusion. It is a distinct honor to be included in the group of previous winners: Tim Luce, Clemente Angioni, Todd Evans and Steve Sabbagh. It is also a great honor to be considered alongside the 2010 nominees: Phil Snyder, Sibylle Guenter, Maiko Yoshida, Hajime Urano, Fulvio Zonca, Erik Garcia, Costanza Maggi, Hartmut Zohm, Thierry Loarer and Bruce Lipschultz. Finally, I would like to thank the readers of Nuclear Fusion for the many citations. John Rice 2010 Nuclear Fusion Award winner Plasma Science and Fusion Center, MIT, Cambridge, MA, USA

  18. Summary of the 19th International Atomic Energy Agency Technical Meeting on 'Research Using Small Fusion Devices'

    NASA Astrophysics Data System (ADS)

    Van Oost, G.; Mank, G.

    2011-08-01

    This paper presents a summary of recent results reported on several topics on magnetic confinement, dense magnetized plasmas, innovative fusion technology and applications, diagnostic systems and control and data acquisition systems. The main topics covered on the magnetic confinement devices, diagnostics and data acquisition concern the tokamak KTM (Kazakhstan Tokamak for Material testing) for materials research and testing, and IAEA Joint Experiments on small tokamaks. For the dense magnetized plasmas results on development and commissioning of plasma focus devices were reported. The plasmatron VISION I for innovative plasma-wall interaction studies, a lithium divertor for KTM and compact fusion reactors as neutron sources were presented.

  19. Using Process Load Cell Information for IAEA Safeguards at Enrichment Plants

    SciTech Connect

    Laughter, Mark D; Whitaker, J Michael; Howell, John

    2010-01-01

    Uranium enrichment service providers are expanding existing enrichment plants and constructing new facilities to meet demands resulting from the shutdown of gaseous diffusion plants, the completion of the U.S.-Russia highly enriched uranium downblending program, and the projected global renaissance in nuclear power. The International Atomic Energy Agency (IAEA) conducts verification inspections at safeguarded facilities to provide assurance that signatory States comply with their treaty obligations to use nuclear materials only for peaceful purposes. Continuous, unattended monitoring of load cells in UF{sub 6} feed/withdrawal stations can provide safeguards-relevant process information to make existing safeguards approaches more efficient and effective and enable novel safeguards concepts such as information-driven inspections. The IAEA has indicated that process load cell monitoring will play a central role in future safeguards approaches for large-scale gas centrifuge enrichment plants. This presentation will discuss previous work and future plans related to continuous load cell monitoring, including: (1) algorithms for automated analysis of load cell data, including filtering methods to determine significant weights and eliminate irrelevant impulses; (2) development of metrics for declaration verification and off-normal operation detection ('cylinder counting,' near-real-time mass balancing, F/P/T ratios, etc.); (3) requirements to specify what potentially sensitive data is safeguards relevant, at what point the IAEA gains on-site custody of the data, and what portion of that data can be transmitted off-site; (4) authentication, secure on-site storage, and secure transmission of load cell data; (5) data processing and remote monitoring schemes to control access to sensitive and proprietary information; (6) integration of process load cell data in a layered safeguards approach with cross-check verification; (7) process mock-ups constructed to provide simulated

  20. Proficiency Testing as a tool to monitor consistency of measurements in the IAEA/WHO Network of Secondary Standards Dosimetry Laboratories

    NASA Astrophysics Data System (ADS)

    Meghzifene, Ahmed; Czap, Ladislav; Shortt, Ken

    2008-08-01

    The International Atomic Energy Agency (IAEA) and the World Health Organization (WHO) established a Network of Secondary Standards Dosimetry Laboratories (IAEA/WHO SSDL Network) in 1976. Through SSDLs designated by Member States, the Network provides a direct link of national dosimetry standards to the international measurement system of standards traceable to the Bureau International des Poids et Mesures (BIPM). Within this structure and through the proper calibration of field instruments, the SSDLs disseminate S.I. quantities and units. To ensure that the services provided by SSDL members to end-users follow internationally accepted standards, the IAEA has set up two different comparison programmes. One programme relies on the IAEA/WHO postal TLD service and the other uses comparisons of calibrated ionization chambers to help the SSDLs verify the integrity of their national standards and the procedures used for the transfer of the standards to the end-users. The IAEA comparisons include 60Co air kerma (NK) and absorbed dose to water (ND,W) coefficients. The results of the comparisons are confidential and are communicated only to the participants. This is to encourage participation of the laboratories and their full cooperation in the reconciliation of any discrepancy. This work describes the results of the IAEA programme comparing calibration coefficients for radiotherapy dosimetry, using ionization chambers. In this programme, ionization chambers that belong to the SSDLs are calibrated sequentially at the SSDL, at the IAEA, and again at the SSDL. As part of its own quality assurance programme, the IAEA has participated in several regional comparisons organized by Regional Metrology Organizations. The results of the IAEA comparison programme show that the majority of SSDLs are capable of providing calibrations that fall inside the acceptance level of 1.5% compared to the IAEA.

  1. Certified Reference Material IAEA-446 for radionuclides in Baltic Sea seaweed.

    PubMed

    Pham, M K; Benmansour, M; Carvalho, F P; Chamizo, E; Degering, D; Engeler, C; Gascó, C; Gwynn, J P; Harms, A V; Hrnecek, E; Ibanez, F L; Ilchmann, C; Ikaheimonen, T; Kanisch, G; Kloster, M; Llaurado, M; Mauring, A; Møller, B; Morimoto, T; Nielsen, S P; Nies, H; Norrlid, L D R; Pettersson, H B L; Povinec, P P; Rieth, U; Samuelsson, C; Schikowski, J; Silobritiene, B V; Smedley, P A; Suplinska, M; Vartti, V-P; Vasileva, E; Wong, J; Zalewska, T; Zhou, W

    2014-05-01

    A Certified Reference Material (CRM) for radionuclides in seaweed (Fucus vesiculosus) from the Baltic Sea (IAEA-446) is described and the results of the certification process are presented. The (40)K, (137)Cs, (234)U and (239+240)Pu radionuclides were certified for this material, and information values for 12 other radionuclides ((90)Sr, (99)Tc, (210)Pb ((210)Po), (226)Ra, (228)Ra, (228)Th, (230)Th, (232)Th, (235)U, (238)U, (239)Pu and (240)Pu) are presented. The CRM can be used for Quality Assurance/Quality Control of analysis of radionuclides in seaweed and other biota samples, as well as for development and validation of analytical methods, and for training purposes.

  2. International Atomic Energy Agency (IAEA) initiatives: Records management for deep and near surface geologic repositories

    SciTech Connect

    Warner, P.J.

    1996-09-01

    The international scientific community has long had an interest in determining methods by which information regarding nuclear waste repositories, and the inherent danger to humanity, could be passed from generation to generation and society to society. Because nuclear waste will remain radioactive for thousands of years future generations must be warned of the dangers thus eliminating intentional or inadvertent intrusion. Member States of the IAEA have determined that the principle safety of such sites must not rely solely on long term institutional arrangements for the retention of information. It is believed that repository siting, design, operation and postoperation information should be gathered, managed and retained so that this information remains accessible to future societies over a very long period of time. The radionuclide life is 10,000 years; thus the retention of information continues beyond current societies, cultures and languages, and must be continually migrated to new retrieval technologies to assure access.

  3. IAEA coordinated research projects on core physics benchmarks for high temperature gas-cooled reactors

    SciTech Connect

    Methnani, M.

    2006-07-01

    High-temperature Gas-Cooled Reactor (HTGR) designs present special computational challenges related to their core physics characteristics, in particular neutron streaming, double heterogeneities, impurities and the random distribution of coated fuel particles in the graphite matrix. In recent years, two consecutive IAEA Coordinated Research Projects (CRP 1 and CRP 5) have focused on code-to-code and code-to-experiment comparisons of representative benchmarks run by several participating international institutes. While the PROTEUS critical HTR experiments provided the test data reference for CRP-1, the more recent CRP-5 data has been made available by the HTTR, HTR-10 and ASTRA test facilities. Other benchmark cases are being considered for the GT-MHR and PBMR core designs. This paper overviews the scope and some sample results of both coordinated research projects. (authors)

  4. IAEA CRP on HTGR Uncertainty Analysis: Benchmark Definition and Test Cases

    SciTech Connect

    Gerhard Strydom; Frederik Reitsma; Hans Gougar; Bismark Tyobeka; Kostadin Ivanov

    2012-11-01

    Uncertainty and sensitivity studies are essential elements of the reactor simulation code verification and validation process. Although several international uncertainty quantification activities have been launched in recent years in the LWR, BWR and VVER domains (e.g. the OECD/NEA BEMUSE program [1], from which the current OECD/NEA LWR Uncertainty Analysis in Modelling (UAM) benchmark [2] effort was derived), the systematic propagation of uncertainties in cross-section, manufacturing and model parameters for High Temperature Reactor (HTGR) designs has not been attempted yet. This paper summarises the scope, objectives and exercise definitions of the IAEA Coordinated Research Project (CRP) on HTGR UAM [3]. Note that no results will be included here, as the HTGR UAM benchmark was only launched formally in April 2012, and the specification is currently still under development.

  5. Analytical quality of environmental analysis: Recent results and future trends of the IAEA-ILMR's Analytical Quality Control Program

    SciTech Connect

    Ballestra, S.; Vas, D.; Holm, E.; Lopez, J.J.; Parsi, P. )

    1988-01-01

    The Analytical Quality Control Services Program of the IAEA-ILMR covers a wide variety of intercalibration and reference materials. The purpose of the program is to ensure the comparability of the results obtained by the different participants and to enable laboratories engaged in low-level analyses of marine environmental materials to control their analytical performance. Within the past five years, the International Laboratory of Marine Radioactivity in Monaco has organized eight intercomparison exercises, on a world-wide basis, on natural materials of marine origin comprising sea water, sediment, seaweed and fish flesh. Results on artificial (fission and activation products, transuranium elements) and natural radionuclides were compiled and evaluated. Reference concentration values were established for a number of the intercalibration samples allowing them to become certified as reference materials available for general distribution. The results of the fish flesh sample and those of the deep-sea sediment are reviewed. The present status of three on-going intercomparison exercises on post-Chernobyl samples IAEA-306 (Baltic Sea sediment), IAEA-307 (Mediterranean sea-plant Posidonia oceanica) and IAEA-308 (Mediterranean mixed seaweed) is also described. 1 refs., 4 tabs.

  6. MANAGING UNCERTAINTIES ASSOCIATED WITH RADIOACTIVE WASTE DISPOSAL: TASK GROUP 4 OF THE IAEA PRISM PROJECT

    SciTech Connect

    Seitz, R.

    2011-03-02

    It is widely recognized that the results of safety assessment calculations provide an important contribution to the safety arguments for a disposal facility, but cannot in themselves adequately demonstrate the safety of the disposal system. The safety assessment and a broader range of arguments and activities need to be considered holistically to justify radioactive waste disposal at any particular site. Many programs are therefore moving towards the production of what has become known as a Safety Case, which includes all of the different activities that are conducted to demonstrate the safety of a disposal concept. Recognizing the growing interest in the concept of a Safety Case, the International Atomic Energy Agency (IAEA) is undertaking an intercomparison and harmonization project called PRISM (Practical Illustration and use of the Safety Case Concept in the Management of Near-surface Disposal). The PRISM project is organized into four Task Groups that address key aspects of the Safety Case concept: Task Group 1 - Understanding the Safety Case; Task Group 2 - Disposal facility design; Task Group 3 - Managing waste acceptance; and Task Group 4 - Managing uncertainty. This paper addresses the work of Task Group 4, which is investigating approaches for managing the uncertainties associated with near-surface disposal of radioactive waste and their consideration in the context of the Safety Case. Emphasis is placed on identifying a wide variety of approaches that can and have been used to manage different types of uncertainties, especially non-quantitative approaches that have not received as much attention in previous IAEA projects. This paper includes discussions of the current results of work on the task on managing uncertainty, including: the different circumstances being considered, the sources/types of uncertainties being addressed and some initial proposals for approaches that can be used to manage different types of uncertainties.

  7. On the status of IAEA delta-13C stable isotope reference materials.

    NASA Astrophysics Data System (ADS)

    Assonov, Sergey; Groening, Manfred; Fajgelj, Ales

    2016-04-01

    For practical reasons all isotope measurements are performed on relative scales realized through the use of international, scale-defining primary standards. In fact these standards were materials (artefacts, similar to prototypes of meter and kg) selected based on their properties. The VPDB delta-13C scale is realised via two highest-level reference materials NBS19 and LSVEC, the first defining the scale and the second aimed to normalise lab-to-lab calibrations. These two reference materials (RMs) have been maintained and distributed by IAEA and NIST. The priority task is to maintain these primary RMs at the required uncertainty level, thus ensuring the long-term scale consistency. The second task is to introduce replacements when needed (currently for exhausted NBS19, work in progress). The next is to produce a family of lower level RMs (secondary, tertiary) addressing needs of various applications (with different delta values, in different physical-chemical forms) and their needs for the uncertainty; these RMs should be traceable to the highest level RMs. Presently three is a need for a range of RMs addressing existing and newly emerging analytical techniques (e.g. optical isotopic analysers) in form of calibrated CO2 gases with different delta-13C values. All that implies creating a family of delta-13C stable isotope reference materials. Presently IAEA works on replacement for NBS19 and planning new RMs. Besides, we found that LSVEC (introduced as second anchor for the VPDB scale in 2006) demonstrate a considerable scatter of its delta-13C value which implies a potential bias of the property value and increased value uncertainty which may conflict with uncertainty requirements for atmospheric monitoring. That is not compatible with the status of LSVEC, and therefore it should be replaced as soon as possible. The presentation will give an overview of the current status, the strategic plan of developments and the near future steps.

  8. The evolution and impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in the Latin American region.

    PubMed

    Morales Pedraza, Jorge; Phillips, Glyn O

    2009-05-01

    Since 1993, the IAEA supported the establishment or the consolidation of seven tissue banks in the region. As a direct or indirect consequence of the implementation of the IAEA program, more than 53 tissue banks are now operating in the participating countries. The fast development of tissue banks in the Latin America region under the ARCAL Agreement and with the financial and technical support of the IAEA program made it necessary to train new tissue bank operators and medical personnel. In general, 90 tissue bank operators and medical personnel were trained in the training centre of Buenos Aires. Another six tissue bank operators and medical personnel were trained in the International Training Centre of Singapore. The main impact of the IAEA program in the region was the following: the establishment or consolidation of fifty-three tissue banks in nine countries in the region; the implementation of five national projects, allocating $1,006,737 dollars for this purpose and of one regional project allocating $284,741 dollars for this purpose; the use of the IAEA Standards, the IAEA Code of Practice and the IAEA Public Awareness Strategies in several tissue banks in the region; the application of quality control and quality assurances manuals in all of the participating countries.

  9. 2014 Nuclear Fusion Prize Acceptance Speech 2014 Nuclear Fusion Prize Acceptance Speech

    NASA Astrophysics Data System (ADS)

    Snyder, P. B.

    2015-01-01

    It is a great honor to receive the 2014 Nuclear Fusion Prize, here at the 25th IAEA Fusion Energy Conference. On behalf of everyone involved in this work, I would like to thank the IAEA, the Nuclear Fusion journal team, the IOP, and specifically Mitsuru Kikuchi, for their support of this important award. I would also like to acknowledge the many important contributions made by the other ten papers nominated for this prize. Our paper investigates the physics of the H-mode pedestal in tokamaks, specifically the development of a predictive understanding of the pedestal structure based on electromagnetic instabilities which constrain it, and the testing of the resulting theoretical model (EPED) against detailed observations on multiple devices. In addition to making pedestal predictions for existing devices, the paper also presents predictions for ITER, including methods for optimizing its pedestal height and fusion performance. What made this work possible, and indeed a pleasure to be involved with, was an extensive set of collaborations, including theory-experiment, multi-institutional, and international collaborations. Many of these collaborations have gone on for over a decade, and have been fostered in part by the ITPA Pedestal Group. The eight authors of this paper, from five institutions, all made important contributions. Rich Groebner, Tom Osborne and Tony Leonard carried out dedicated experiments and data analysis on the DIII-D tokamak, testing the EPED model over a very wide range of parameters. Jerry Hughes led dedicated experiments on Alcator C-Mod which tested the model at high magnetic field and pedestal pressure. Marc Beurskens carried out experiments and data analysis on the JET tokamak, testing the model at large scale. Xueqiao Xu conducted two-fluid studies of diamagnetic stabilization, which enabled a more accurate treatment of this important effect. Finally, Howard Wilson and I have been working together for many years to develop analytic formalism

  10. Special section containing papers presented at the 13th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (Beijing, China, 17-20 September 2013) Special section containing papers presented at the 13th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (Beijing, China, 17-20 September 2013)

    NASA Astrophysics Data System (ADS)

    Lin, Z.

    2014-10-01

    In magnetic fusion plasmas, a significant fraction of the kinetic pressure is contributed by superthermal charged particles produced by auxiliary heating (fast ions and electrons) and fusion reactions (a-particles). Since these energetic particles are often far away from thermal equilibrium due to their non-Maxwellian distribution and steep pressure gradients, the free energy can excite electromagnetic instabilities to intensity levels well above the thermal fluctuations. The resultant electromagnetic turbulence could induce large transport of energetic particles, which could reduce heating efficiency, degrade overall plasma confinement, and damage fusion devices. Therefore, understanding and predicting energetic particle confinement properties are critical to the success of burning plasma experiments such as ITER since the ignition relies on plasma self-heating by a-particles. To promote international exchanges and collaborations on energetic particle physics, the biannual conference series under the auspices of the International Atomic Energy Agency (IAEA) were help in Kyiv (1989), Aspenas (1991), Trieste (1993), Princeton (1995), JET/Abingdon (1997), Naka (1999), Gothenburg (2001), San Diego (2003), Takayama (2005), Kloster Seeon (2007), Kyiv (2009), and Austin (2011). The papers in this special section were presented at the most recent meeting, the 13th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems, which was hosted by the Fusion Simulation Center, Peking University, Beijing, China (17-20 September 2013). The program of the meeting consisted of 71 presentations, including 13 invited talks, 26 oral contributed talks, 30 posters, and 2 summary talks, which were selected by the International Advisory Committee (IAC). The IAC members include H. Berk, L.G. Eriksson, A. Fasoli, W. Heidbrink, Ya. Kolesnichenko, Ph. Lauber, Z. Lin, R. Nazikian, S. Pinches, S. Sharapov, K. Shinohara, K. Toi, G. Vlad, and X.T. Ding. The conference program

  11. Review of fusion synfuels

    SciTech Connect

    Fillo, J.A.

    1980-01-01

    Thermonuclear fusion offers an inexhaustible source of energy for the production of hydrogen from water. Depending on design, electric generation efficiencies of approx. 40 to 60% and hydrogen production efficiencies by high-temperature electrolysis of approx. 50 to 65% are projected for fusion reactors using high-temperatures blankets. Fusion/coal symbiotic systems appear economically promising for the first generation of commercial fusion synfuels plants. Coal production requirements and the environmental effects of large-scale coal usage would be greatly reduced by a fusion/coal system. In the long term, there could be a gradual transition to an inexhaustible energy system based solely on fusion.

  12. IAEA Coordinated Research Project on HTGR Reactor Physics, Thermal-hydraulics and Depletion Uncertainty Analysis

    SciTech Connect

    Strydom, Gerhard; Bostelmann, F.

    2015-09-01

    The continued development of High Temperature Gas Cooled Reactors (HTGRs) requires verification of HTGR design and safety features with reliable high fidelity physics models and robust, efficient, and accurate codes. The predictive capability of coupled neutronics/thermal-hydraulics and depletion simulations for reactor design and safety analysis can be assessed with sensitivity analysis (SA) and uncertainty analysis (UA) methods. Uncertainty originates from errors in physical data, manufacturing uncertainties, modelling and computational algorithms. (The interested reader is referred to the large body of published SA and UA literature for a more complete overview of the various types of uncertainties, methodologies and results obtained). SA is helpful for ranking the various sources of uncertainty and error in the results of core analyses. SA and UA are required to address cost, safety, and licensing needs and should be applied to all aspects of reactor multi-physics simulation. SA and UA can guide experimental, modelling, and algorithm research and development. Current SA and UA rely either on derivative-based methods such as stochastic sampling methods or on generalized perturbation theory to obtain sensitivity coefficients. Neither approach addresses all needs. In order to benefit from recent advances in modelling and simulation and the availability of new covariance data (nuclear data uncertainties) extensive sensitivity and uncertainty studies are needed for quantification of the impact of different sources of uncertainties on the design and safety parameters of HTGRs. Only a parallel effort in advanced simulation and in nuclear data improvement will be able to provide designers with more robust and well validated calculation tools to meet design target accuracies. In February 2009, the Technical Working Group on Gas-Cooled Reactors (TWG-GCR) of the International Atomic Energy Agency (IAEA) recommended that the proposed Coordinated Research Program (CRP) on

  13. Strengthened IAEA Safeguards-Imagery Analysis: Geospatial Tools for Nonproliferation Analysis

    SciTech Connect

    Pabian, Frank V

    2012-08-14

    This slide presentation focuses on the growing role and importance of imagery analysis for IAEA safeguards applications and how commercial satellite imagery, together with the newly available geospatial tools, can be used to promote 'all-source synergy.' As additional sources of openly available information, satellite imagery in conjunction with the geospatial tools can be used to significantly augment and enhance existing information gathering techniques, procedures, and analyses in the remote detection and assessment of nonproliferation relevant activities, facilities, and programs. Foremost of the geospatial tools are the 'Digital Virtual Globes' (i.e., GoogleEarth, Virtual Earth, etc.) that are far better than previously used simple 2-D plan-view line drawings for visualization of known and suspected facilities of interest which can be critical to: (1) Site familiarization and true geospatial context awareness; (2) Pre-inspection planning; (3) Onsite orientation and navigation; (4) Post-inspection reporting; (5) Site monitoring over time for changes; (6) Verification of states site declarations and for input to State Evaluation reports; and (7) A common basis for discussions among all interested parties (Member States). Additionally, as an 'open-source', such virtual globes can also provide a new, essentially free, means to conduct broad area search for undeclared nuclear sites and activities - either alleged through open source leads; identified on internet BLOGS and WIKI Layers, with input from a 'free' cadre of global browsers and/or by knowledgeable local citizens (a.k.a.: 'crowdsourcing'), that can include ground photos and maps; or by other initiatives based on existing information and in-house country knowledge. They also provide a means to acquire ground photography taken by locals, hobbyists, and tourists of the surrounding locales that can be useful in identifying and discriminating between relevant and non-relevant facilities and their associated

  14. Viral membrane fusion.

    PubMed

    Harrison, Stephen C

    2015-05-01

    Membrane fusion is an essential step when enveloped viruses enter cells. Lipid bilayer fusion requires catalysis to overcome a high kinetic barrier; viral fusion proteins are the agents that fulfill this catalytic function. Despite a variety of molecular architectures, these proteins facilitate fusion by essentially the same generic mechanism. Stimulated by a signal associated with arrival at the cell to be infected (e.g., receptor or co-receptor binding, proton binding in an endosome), they undergo a series of conformational changes. A hydrophobic segment (a "fusion loop" or "fusion peptide") engages the target-cell membrane and collapse of the bridging intermediate thus formed draws the two membranes (virus and cell) together. We know of three structural classes for viral fusion proteins. Structures for both pre- and postfusion conformations of illustrate the beginning and end points of a process that can be probed by single-virion measurements of fusion kinetics.

  15. Viral membrane fusion

    PubMed Central

    Harrison, Stephen C.

    2015-01-01

    Membrane fusion is an essential step when enveloped viruses enter cells. Lipid bilayer fusion requires catalysis to overcome a high kinetic barrier; viral fusion proteins are the agents that fulfill this catalytic function. Despite a variety of molecular architectures, these proteins facilitate fusion by essentially the same generic mechanism. Stimulated by a signal associated with arrival at the cell to be infected (e.g., receptor or co-receptor binding, proton binding in an endosome), they undergo a series of conformational changes. A hydrophobic segment (a “fusion loop” or “fusion peptide”) engages the target-cell membrane and collapse of the bridging intermediate thus formed draws the two membranes (virus and cell) together. We know of three structural classes for viral fusion proteins. Structures for both pre- and postfusion conformations of illustrate the beginning and end points of a process that can be probed by single-virion measurements of fusion kinetics. PMID:25866377

  16. Rapid development of tissue bank achieved by International Atomic Energy Agency (IAEA) Tissue Banking Programme in China.

    PubMed

    Zhang, Yu-Min; Wang, Jian-Ru; Zhang, Nai-Li; Liu, Xiao-Ming; Zhou, Mo; Ma, Shao-Ying; Yang, Ting; Li, Bao-Xing

    2014-09-01

    Before 1986, the development of tissue banking in China has been slow and relatively uncoordinated. Under the support of International Atomic Energy Agency (IAEA), Tissue Banking in China experienced rapid development. In this period, China Institute for Radiation Protection tissue bank mastered systematic and modern tissue banking technique by IAEA training course and gradually developed the first regional tissue bank (Shanxi Provincial Tissue Bank, SPTB) to provide tissue allograft. Benefit from training course, SPTB promoted the development of tissue transplantation by ways of training, brochure, advertisement and meeting. Tissue allograft transplantation acquired recognition from clinic and supervision and administration from government. Quality system gradually is developing and perfecting. Tissue allograft transplantation and tissue bank are developing rapidly and healthy.

  17. Proceedings of the IAEA specialists` meeting on cracking in LWR RPV head penetrations

    SciTech Connect

    Pugh, C.E.; Raney, S.J.

    1996-07-01

    This report contains 17 papers that were presented in four sessions at the IAEA Specialists` meeting on Cracking in LWR RPV Head Penetrations held at ASTM Headquarters in Philadelphia on May 2-3, 1995. The papers are compiled here in the order that presentations were made in the sessions, and they relate to operational observations, inspection techniques, analytical modeling, and regulatory control. The goal of the meeting was to allow international experts to review experience in the field of ensuring adequate performance of reactor pressure vessel (RPV) heads and penetrations. The emphasis was to allow a better understanding of RPV material behavior, to provide guidance supporting reliability and adequate performance, and to assist in defining directions for further investigations. The international nature of the meeting is illustrated by the fact that papers were presented by researchers from 10 countries. There were technical experts present form other countries who participated in discussions of the results presented. This present document incorporates the final version of the papers as received from the authors. The final chapter includes conclusions and recommendations. Individual papers have been cataloged separately.

  18. Lessons from UNSCOM and IAEA regarding remote monitoring and air sampling

    SciTech Connect

    Dupree, S.A.

    1996-01-01

    In 1991, at the direction of the United Nations Security Council, UNSCOM and IAEA developed plans for On-going Monitoring and Verification (OMV) in Iraq. The plans were accepted by the Security Council and remote monitoring and atmospheric sampling equipment has been installed at selected sites in Iraq. The remote monitoring equipment consists of video cameras and sensors positioned to observe equipment or activities at sites that could be used to support the development or manufacture of weapons of mass destruction, or long-range missiles. The atmospheric sampling equipment provides unattended collection of chemical samples from sites that could be used to support the development or manufacture of chemical weapon agents. To support OMV in Iraq, UNSCOM has established the Baghdad Monitoring and Verification Centre. Imagery from the remote monitoring cameras can be accessed in near-real time from the Centre through RIF communication links with the monitored sites. The OMV program in Iraq has implications for international cooperative monitoring in both global and regional contexts. However, monitoring systems such as those used in Iraq are not sufficient, in and of themselves, to guarantee the absence of prohibited activities. Such systems cannot replace on-site inspections by competent, trained inspectors. However, monitoring similar to that used in Iraq can contribute to openness and confidence building, to the development of mutual trust, and to the improvement of regional stability.

  19. IAEA Isotope-enabled coupled catchment-lake water balance model, IWBMIso: description and validation.

    PubMed

    Belachew, Dagnachew Legesse; Leavesley, George; David, Olaf; Patterson, Dave; Aggarwal, Pradeep; Araguas, Luis; Terzer, Stefan; Carlson, Jack

    2016-01-01

    The International Atomic Energy Agency (IAEA) Water Balance Model with Isotopes (IWBMIso) is a spatially distributed monthly water balance model that considers water fluxes and storages and their associated isotopic compositions. It is composed of a lake water balance model that is tightly coupled with a catchment water balance model. Measured isotope compositions of precipitation, rivers, lakes, and groundwater provide data that can be used to make an improved estimate of the magnitude of the fluxes among the model components. The model has been developed using the Object Modelling System (OMS). A variety of open source geographic information systems and web-based tools have been combined to provide user support for (1) basin delineation, characterization, and parameterization; (2) data pre-processing; (3) model calibration and application; and (4) visualization and analysis of model results. In regions where measured data are limited, the model can use freely available global data sets of climate, isotopic composition of precipitation, and soils and vegetation characteristics to create input data files and estimate spatially distributed model parameters. The OMS model engine and support functions, and the spatial and web-based tool set are integrated using the Colorado State University Environmental Risk Assessment and Management System (eRAMS) framework. The IWBMIso can be used to assess the spatial and temporal variability of annual and monthly water balance components for input to water planning and management.

  20. Market Research Survey of Commercial Off-The-Shelf (COTS) Portable MS Systems for IAEA Safeguards Applications

    SciTech Connect

    Hart, Garret L.; Hager, George J.; Barinaga, Charles J.; Duckworth, Douglas C.

    2013-02-01

    This report summarizes the results for the market research survey of mass spectrometers that are deemed pertinent to International Atomic Energy Agency (IAEA) needs and strategic objectives. The focus of the report is on MS instruments that represent currently available (or soon to be) commercial off-the shelf (COTS) technology and weigh less than 400 pounds. A compilation of all available MS instruments (36 COTS and 2 R&D) is presented, along with pertinent information regarding each instrument.

  1. Cold fusion research

    SciTech Connect

    1989-11-01

    I am pleased to forward to you the Final Report of the Cold Fusion Panel. This report reviews the current status of cold fusion and includes major chapters on Calorimetry and Excess Heat, Fusion Products and Materials Characterization. In addition, the report makes a number of conclusions and recommendations, as requested by the Secretary of Energy.

  2. Magneto-Inertial Fusion

    SciTech Connect

    Wurden, G. A.; Hsu, S. C.; Intrator, T. P.; Grabowski, T. C.; Degnan, J. H.; Domonkos, M.; Turchi, P. J.; Campbell, E. M.; Sinars, D. B.; Herrmann, M. C.; Betti, R.; Bauer, B. S.; Lindemuth, I. R.; Siemon, R. E.; Miller, R. L.; Laberge, M.; Delage, M.

    2015-11-17

    In this community white paper, we describe an approach to achieving fusion which employs a hybrid of elements from the traditional magnetic and inertial fusion concepts, called magneto-inertial fusion (MIF). The status of MIF research in North America at multiple institutions is summarized including recent progress, research opportunities, and future plans.

  3. United States of America activities relative to the International Atomic Energy Agency (IAEA) initiative: Records management for deep geologic repositories

    SciTech Connect

    Warner, P.J.

    1997-03-01

    The International Atomic Energy Agency (IAEA) has conducted consultant and advisory meetings to prepare a Technical Document which is intended to provide guidance to all IAEA Member States (otherwise known as countries) that are currently planning, designing, constructing or operating a deep or near surface geological repository for the storage and protection of vitrified high-level radioactive waste, spent fuel waste and TRU-waste (transuranic). Eleven countries of the international community are presently in various stages of siting, designing, or constructing deep geologic repositories. Member States of the IAEA have determined that the principle safety of such completed and operation sites must not rely solely on long term institutional arrangements for the retention of information. It is believed that repository siting, design, operation and postoperation information should be gathered, managed and retained in a manner that will provide information to future societies over a very long period of time. The radionuclide life is 10,000 years thus the retention of information must outlive current societies, languages, and be continually migrated to new technology to assure retrieval. This presentation will provide an overview of the status of consideration and implementation of these issues within the United States efforts relative to deep geologic repository projects.

  4. Radiation processing techniques in remediation of pollutants, and the role of the IAEA in supporting capacity building in developing countries

    NASA Astrophysics Data System (ADS)

    Haji-Saeid, S. Mohammad.; Sampa, M. H.; Safrany, A.; Sabharwal, S.; Ramamoorthy, N.

    2012-08-01

    Radiation treatment, or a combination of radiation with conventional biological-chemical-physical processes, can help in the remediation of contaminated surfaces and in combating industrial chemical effluents and air pollution. The use of ionizing radiation as a powerful tool for inactivation of microbes is a valuable option to address likely threats from biohazard contamination that could be introduced either deliberately or inadvertently into areas where the public are exposed to, as well as for treatment of volatile organic compounds and similar hazardous chemical agents is an emerging development in tackling harmful pollutants. The role of the IAEA has been crucial both in supporting the development of local capabilities as well as in fostering international cooperation due to the multidisciplinary expertise required for achieving sustainable benefits. The IAEA is implementing Coordinated Research Projects, (CRP) thematic topical reviews of issues and challenges involved, and Technical Cooperation (TC) assistance in establishing and maintaining infrastructure in the MS. This paper will give an insight into the above mentioned IAEA activities, with examples of successes achieved through CRPs, as well as challenges on the road for broader dissemination of radiation processing technology for environmental remediation.

  5. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Singapore.

    PubMed

    Nather, Aziz; Morales Pedraza, Jorge

    2009-05-01

    The National University Hospital (NUH) Tissue Bank was established in October 1988. The National University of Singapore (NUS) was officially appointed by IAEA to be the IAEA/NUS Regional Training Centre (RTC) for RCA Member States for training of tissue bank operators on September 18, 1996. In the first five years since its establishment the National University Hospital Tissue Bank concentrated its work on the sterile procurement and production of deep frozen femoral heads and were used in patients for bone reconstruction. The cost of producing these tissues were about SGD$ 250 per femoral head although cost fees were initially charged at SGD$ 50 per femoral head. The most important activity carried out by Singapore within the IAEA was training. Between November 1997 and April 2007, a total of nine courses were conducted by RTC with a total of 180 tissue bank operators registered, 133 from Asia and the Pacific region (13 countries, including 2 from Iran), 14 from Africa (Zambia, Libya, Egypt, Algeria, and South Africa), 6 from Latin America (Brazil, Chile, Cuba, Peru, and Uruguay), 9 from Europe (Greece, Slovakia, Poland, and Ukraine), and 2 from Australia. The last batch (ninth batch) involved 20 students registered in April 2007 and will be due to sit for the terminal examination in April 2008.

  6. Hybrid imaging worldwide-challenges and opportunities for the developing world: a report of a Technical Meeting organized by IAEA.

    PubMed

    Kashyap, Ravi; Dondi, Maurizio; Paez, Diana; Mariani, Guliano

    2013-05-01

    The growth in nuclear medicine, in the past decade, is largely due to hybrid imaging, specifically single-photon emission tomography-computed tomography (SPECT-CT) and positron emission tomography-computed tomography (PET-CT). Introduction and use of hybrid imaging has been growing at a fast pace. This has led to many challenges and opportunities to the personnel dealing with it. The International Atomic Energy Agency (IAEA) keeps a close watch on the trends in applications of nuclear techniques in health by many ways, including obtaining inputs from member states and professional societies. In 2012, a Technical Meeting on trends in hybrid imaging was organized by IAEA to understand the current status and trends of hybrid imaging using nuclear techniques, its role in clinical practice, and associated educational needs and challenges. Perspective of scientific societies and professionals from all the regions of the world was obtained. Heterogeneity in value, educational needs, and access was noted and the drivers of this heterogeneity were discussed. This article presents the key points shared during the technical meeting, focusing primarily on SPECT-CT and PET-CT, and shares the action plan for IAEA to deal with heterogeneity as suggested by the participants.

  7. Implementation of neutron counting techniques at US facilities for IAEA verification of excess materials from nuclear weapons production

    SciTech Connect

    Stewart, J.E.; Krick, M.S.; Langner, D.G.; Reilly, T.D.; Theis, W.; Lemaire, R.J.; Xiao, J.

    1995-08-01

    The U.S. Nonproliferation and Export Control Policy, announced by President Clinton before the United Nations General Assembly on September 27, 1993, commits the U.S. to placing under International Atomic Energy Agency (IAEA) Safeguards excess nuclear materials no longer needed for the U.S. nuclear deterrent. As of July 1, 1995, the IAEA had completed Initial Physical Inventory Verification (IPIV) at two facilities: a storage vault in the Oak Ridge Y-12 plant containing highly enriched uranium (HOW) metal and another storage vault in the Hanford Plutonium Finishing Plant (PFP) containing plutonium oxide and plutonium-bearing residues. Another plutonium- storage vault, located at Rocky Flats, is scheduled for the IPIV in the fall of 1995. Conventional neutron coincidence counting is one of the routinely applied IAEA nondestructive assay (ND) methods for verification of uranium and plutonium. However, at all three facilities mentioned above, neutron ND equipment had to be modified or developed for specific facility needs such as the type and configuration of material placed under safeguards. This document describes those modifications and developments.

  8. Magnetized target fusion and fusion propulsion

    NASA Astrophysics Data System (ADS)

    Kirkpatrick, Ronald C.

    2002-01-01

    Magnetized target fusion (MTF) is a thermonuclear fusion concept that is intermediate between the two mainline approaches, magnetic confinement and inertial confinement fusion (MCF and ICF). MTF incorporates some aspects of each and offers advantages over each of the mainline approaches. First, it provides a means of reducing the driver power requirements, thereby admitting a wider range of drivers than ICF. Second, the magnetic field is only used for insulation, not confinement, and the plasma is wall confined, so that plasma instabilities are traded in for hydrodynamic instabilities. However, the degree of compression required to reach fusion condition is lower than for ICF, so that hydrodynamic instabilities are much less threatening. The standoff driver innovation proposes to dynamically form the target plasma and a gaseous shell that compresses and confines the target plasma. Therefore, fusion target fabrication is traded in for a multiplicity of plasma guns, which must work in synchrony. The standoff driver embodiment of MTF leads to a fusion propulsion system concept that is potentially compact and lightweight. We will discuss the underlying physics of MTF and some of the details of the fusion propulsion concept using the standoff driver approach. We discuss here the optimization of an MTF target design for space propulsion. .

  9. Viral membrane fusion

    SciTech Connect

    Harrison, Stephen C.

    2015-05-15

    Membrane fusion is an essential step when enveloped viruses enter cells. Lipid bilayer fusion requires catalysis to overcome a high kinetic barrier; viral fusion proteins are the agents that fulfill this catalytic function. Despite a variety of molecular architectures, these proteins facilitate fusion by essentially the same generic mechanism. Stimulated by a signal associated with arrival at the cell to be infected (e.g., receptor or co-receptor binding, proton binding in an endosome), they undergo a series of conformational changes. A hydrophobic segment (a “fusion loop” or “fusion peptide”) engages the target-cell membrane and collapse of the bridging intermediate thus formed draws the two membranes (virus and cell) together. We know of three structural classes for viral fusion proteins. Structures for both pre- and postfusion conformations of illustrate the beginning and end points of a process that can be probed by single-virion measurements of fusion kinetics. - Highlights: • Viral fusion proteins overcome the high energy barrier to lipid bilayer merger. • Different molecular structures but the same catalytic mechanism. • Review describes properties of three known fusion-protein structural classes. • Single-virion fusion experiments elucidate mechanism.

  10. New Organic Stable Isotope Reference Materials for Distribution through the USGS and the IAEA

    NASA Astrophysics Data System (ADS)

    Schimmelmann, Arndt; Qi, Haiping

    2014-05-01

    The widespread adoption of relative stable isotope-ratio measurements in organic matter by diverse scientific disciplines is at odds with the dearth of international organic stable isotopic reference materials (RMs). Only two of the few carbon (C) and nitrogen (N) organic RMs, namely L-glutamic acids USGS40 and USGS41 [1], both available from the U.S. Geological Survey (USGS) and the International Atomic Energy Agency (IAEA), provide an isotopically contrasting pair of organic RMs to enable essential 2-point calibrations for δ-scale normalization [2, 3]. The supply of hydrogen (H) organic RMs is even more limited. Numerous stable isotope laboratories have resorted to questionable practices, for example by using 'CO2, N2, and H2 reference gas pulses' for isotopic calibrations, which violates the principle of identical treatment of sample and standard (i.e., organic unknowns should be calibrated directly against chemically similar organic RMs) [4], or by using only 1 anchor instead of 2 for scale calibration. The absence of international organic RMs frequently serves as an excuse for indefensible calibrations. In 2011, the U.S. National Science Foundation (NSF) funded an initiative of 10 laboratories from 7 countries to jointly develop much needed new organic RMs for future distribution by the USGS and the IAEA. The selection of targeted RMs attempts to cover various common compound classes of broad technical and scientific interest. We had to accept compromises to approach the ideal of high chemical stability, lack of toxicity, and low price of raw materials. Hazardous gases and flammable liquids were avoided in order to facilitate international shipping of future RMs. With the exception of polyethylene and vacuum pump oil, all organic RMs are individual, chemically-pure substances, which can be used for compound-specific isotopic measurements in conjunction with liquid and gas chromatographic interfaces. The compounds listed below are under isotopic calibration by

  11. Fuel Cycle Analysis Framework Base Cases for the IAEA/INPRO GAINS Collaborative Project

    SciTech Connect

    Brent Dixon

    2012-09-01

    Thirteen countries participated in the Collaborative Project GAINS “Global Architecture of Innovative Nuclear Energy Systems Based on Thermal and Fast Reactors Including a Closed Fuel Cycle”, which was the primary activity within the IAEA/INPRO Program Area B: “Global Vision on Sustainable Nuclear Energy” for the last three years. The overall objective of GAINS was to develop a standard framework for assessing future nuclear energy systems taking into account sustainable development, and to validate results through sample analyses. This paper details the eight scenarios that constitute the GAINS framework base cases for analysis of the transition to future innovative nuclear energy systems. The framework base cases provide a reference for users of the framework to start from in developing and assessing their own alternate systems. Each base case is described along with performance results against the GAINS sustainability evaluation metrics. The eight cases include four using a moderate growth projection and four using a high growth projection for global nuclear electricity generation through 2100. The cases are divided into two sets, addressing homogeneous and heterogeneous scenarios developed by GAINS to model global fuel cycle strategies. The heterogeneous world scenario considers three separate nuclear groups based on their fuel cycle strategies, with non-synergistic and synergistic cases. The framework base case analyses results show the impact of these different fuel cycle strategies while providing references for future users of the GAINS framework. A large number of scenario alterations are possible and can be used to assess different strategies, different technologies, and different assumptions about possible futures of nuclear power. Results can be compared to the framework base cases to assess where these alternate cases perform differently versus the sustainability indicators.

  12. Materials research for fusion

    NASA Astrophysics Data System (ADS)

    Knaster, J.; Moeslang, A.; Muroga, T.

    2016-05-01

    Fusion materials research started in the early 1970s following the observation of the degradation of irradiated materials used in the first commercial fission reactors. The technological challenges of fusion energy are intimately linked with the availability of suitable materials capable of reliably withstanding the extremely severe operational conditions of fusion reactors. Although fission and fusion materials exhibit common features, fusion materials research is broader. The harder mono-energetic spectrum associated with the deuterium-tritium fusion neutrons (14.1 MeV compared to <2 MeV on average for fission neutrons) releases significant amounts of hydrogen and helium as transmutation products that might lead to a (at present undetermined) degradation of structural materials after a few years of operation. Overcoming the historical lack of a fusion-relevant neutron source for materials testing is an essential pending step in fusion roadmaps. Structural materials development, together with research on functional materials capable of sustaining unprecedented power densities during plasma operation in a fusion reactor, have been the subject of decades of worldwide research efforts underpinning the present maturity of the fusion materials research programme.

  13. Muon Catalyzed Fusion

    NASA Technical Reports Server (NTRS)

    Armour, Edward A.G.

    2007-01-01

    Muon catalyzed fusion is a process in which a negatively charged muon combines with two nuclei of isotopes of hydrogen, e.g, a proton and a deuteron or a deuteron and a triton, to form a muonic molecular ion in which the binding is so tight that nuclear fusion occurs. The muon is normally released after fusion has taken place and so can catalyze further fusions. As the muon has a mean lifetime of 2.2 microseconds, this is the maximum period over which a muon can participate in this process. This article gives an outline of the history of muon catalyzed fusion from 1947, when it was first realised that such a process might occur, to the present day. It includes a description of the contribution that Drachrnan has made to the theory of muon catalyzed fusion and the influence this has had on the author's research.

  14. Magnetic fusion reactor economics

    SciTech Connect

    Krakowski, R.A.

    1995-12-01

    An almost primordial trend in the conversion and use of energy is an increased complexity and cost of conversion systems designed to utilize cheaper and more-abundant fuels; this trend is exemplified by the progression fossil fission {yields} fusion. The present projections of the latter indicate that capital costs of the fusion ``burner`` far exceed any commensurate savings associated with the cheapest and most-abundant of fuels. These projections suggest competitive fusion power only if internal costs associate with the use of fossil or fission fuels emerge to make them either uneconomic, unacceptable, or both with respect to expensive fusion systems. This ``implementation-by-default`` plan for fusion is re-examined by identifying in general terms fusion power-plant embodiments that might compete favorably under conditions where internal costs (both economic and environmental) of fossil and/or fission are not as great as is needed to justify the contemporary vision for fusion power. Competitive fusion power in this context will require a significant broadening of an overly focused program to explore the physics and simbiotic technologies leading to more compact, simplified, and efficient plasma-confinement configurations that reside at the heart of an attractive fusion power plant.

  15. Magnetic-confinement fusion

    NASA Astrophysics Data System (ADS)

    Ongena, J.; Koch, R.; Wolf, R.; Zohm, H.

    2016-05-01

    Our modern society requires environmentally friendly solutions for energy production. Energy can be released not only from the fission of heavy nuclei but also from the fusion of light nuclei. Nuclear fusion is an important option for a clean and safe solution for our long-term energy needs. The extremely high temperatures required for the fusion reaction are routinely realized in several magnetic-fusion machines. Since the early 1990s, up to 16 MW of fusion power has been released in pulses of a few seconds, corresponding to a power multiplication close to break-even. Our understanding of the very complex behaviour of a magnetized plasma at temperatures between 150 and 200 million °C surrounded by cold walls has also advanced substantially. This steady progress has resulted in the construction of ITER, a fusion device with a planned fusion power output of 500 MW in pulses of 400 s. ITER should provide answers to remaining important questions on the integration of physics and technology, through a full-size demonstration of a tenfold power multiplication, and on nuclear safety aspects. Here we review the basic physics underlying magnetic fusion: past achievements, present efforts and the prospects for future production of electrical energy. We also discuss questions related to the safety, waste management and decommissioning of a future fusion power plant.

  16. Results for Phase I of the IAEA Coordinated Research Program on HTGR Uncertainties

    SciTech Connect

    Strydom, Gerhard; Bostelmann, Friederike; Yoon, Su Jong

    2015-01-01

    The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied. High Temperature Gas-cooled Reactors (HTGR) has its own peculiarities, coated particle design, large graphite quantities, different materials and high temperatures that also require other simulation requirements. The IAEA has therefore launched a Coordinated Research Project (CRP) on the HTGR Uncertainty Analysis in Modeling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the HTR-PM (INET, China). This report summarizes the contributions of the HTGR Methods Simulation group at Idaho National Laboratory (INL) up to this point of the CRP. The activities at INL have been focused so far on creating the problem specifications for the prismatic design, as well as providing reference solutions for the exercises defined for Phase I. An overview is provided of the HTGR UAM objectives and scope, and the detailed specifications for Exercises I-1, I-2, I-3 and I-4 are also included here for completeness. The main focus of the report is the compilation and discussion of reference results for Phase I (i.e. for input parameters at their nominal or best-estimate values), which is defined as the first step of the uncertainty quantification process. These reference results can be used by other CRP participants for comparison with other codes or their own reference

  17. International law problems for realisation of the IAEA conventions on notification and assistance in the case of a nuclear accident

    SciTech Connect

    Petrov, M.M.

    1993-12-31

    The Chernobyl accident underscored the need for an early warning system and international assistance plan in case of a nuclear accident. Shortly after Chernobyl, two conventions were adopted under the auspices of the IAEA. The convention on Early Notification of a Nuclear Accident, in force since 1986, establishes an early warning system for all nuclear accidents whose effects might cross national boundaries. Under the convention on Assistance in the Case of a Nuclear accident or radiological Emergency,in force since 1987, countries must facilitate prompt assistance in case of a nuclear accident or radiological emergency, to minimize it`s consequences. Issues with the conventions are described.

  18. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in India.

    PubMed

    Lobo Gajiwala, Astrid; Morales Pedraza, Jorge

    2009-05-01

    The banking of tissues such bone and skin began in India in the 1980s and 1990s. Although eye banking started in 1945 there was little progress in this field for the next five decades. As part of the IAEA/RCA program to use ionising radiation for the sterilisation of biological tissues in Asia and the Pacific Region, the Tata Memorial Hospital (TMH) in 1986 decided to set up a tissue bank in Mumbai funded by the Government of India. The TMH Tissue Bank became operational in January 1988, and stands as a pioneering effort in the country to provide safe, clinically useful and cost-effective human allografts for transplantation. It uses the IAEA International Standards on Tissue Banking. All the grafts are sterilised terminally by exposure to a dose of 25 kGy of gamma radiation, which has been validated as recommended by the IAEA Code of Practice for the Radiation Sterilisation of Tissues Allografts: Requirements for Validation and Routine Control. The TMH Tissue Bank is registered with the Maharashtra State Health Authorities, and in May 2004, it became India's first Tissue Bank to receive ISO 9001:2000 certification of its Quality Management System. From 1989 to September 2007, the TMH Tissue Bank has supplied 11,369 allografts to 310 surgeons operating in 69 hospitals in Mumbai and 56 hospitals in other parts of India. These numbers have been limited by difficulties with the retrieval of tissues from deceased donors due to inadequate resources and tissue donation policies of hospitals. As the Government of India representative in the IAEA program, the TMH Tissue Bank has promoted and co-coordinated these activities in the country and the development of tissue banks using radiation sterilisation of tissue grafts. Towards this end it has been engaged in training personnel, drawing up project proposals, and supporting the establishment of a Tissue Retrieval Centre in Mumbai. Currently it networks with the Zonal Transplant Co-ordination Centre of the Government of

  19. Cell fusion and nuclear fusion in plants.

    PubMed

    Maruyama, Daisuke; Ohtsu, Mina; Higashiyama, Tetsuya

    2016-12-01

    Eukaryotic cells are surrounded by a plasma membrane and have a large nucleus containing the genomic DNA, which is enclosed by a nuclear envelope consisting of the outer and inner nuclear membranes. Although these membranes maintain the identity of cells, they sometimes fuse to each other, such as to produce a zygote during sexual reproduction or to give rise to other characteristically polyploid tissues. Recent studies have demonstrated that the mechanisms of plasma membrane or nuclear membrane fusion in plants are shared to some extent with those of yeasts and animals, despite the unique features of plant cells including thick cell walls and intercellular connections. Here, we summarize the key factors in the fusion of these membranes during plant reproduction, and also focus on "non-gametic cell fusion," which was thought to be rare in plant tissue, in which each cell is separated by a cell wall.

  20. Controlled Nuclear Fusion.

    ERIC Educational Resources Information Center

    Glasstone, Samuel

    This publication is one of a series of information booklets for the general public published by The United States Atomic Energy Commission. Among the topics discussed are: Importance of Fusion Energy; Conditions for Nuclear Fusion; Thermonuclear Reactions in Plasmas; Plasma Confinement by Magnetic Fields; Experiments With Plasmas; High-Temperature…

  1. Antiproton catalyzed fusion

    SciTech Connect

    Morgan, D.L. Jr.; Perkins, L.J.; Haney, S.W.

    1995-05-15

    Because of the potential application to power production, it is important to investigate a wide range of possible means to achieve nuclear fusion, even those that may appear initially to be infeasible. In antiproton catalyzed fusion, the negative antiproton shields the repulsion between the positively charged nuclei of hydrogen isotopes, thus allowing a much higher level of penetration through the repulsive Coulomb barrier, and thereby greatly enhancing the fusion cross section. Because of their more compact wave function, the more massive antiprotons offer considerably more shielding than do negative muons. The effects of the shielding on fusion cross sections are most predominate, at low energies. If the antiproton could exist in the ground state with a nucleus for a sufficient time without annihilating, the fusion cross sections are so enhanced that at room temperature energies, values up to about 1,000 barns (that for d+t) would be possible. Unfortunately, the cross section for antiproton annihilation with the incoming nucleus is even higher. A model that provides an upper bound for the fusion to annihilation cross section for all relevant energies indicates that each antiproton will catalyze no more than about one fusion. Because the energy required to make one antiproton greatly exceeds the fusion energy that is released, this level of catalysis is far from adequate for power production.

  2. Fusion Science Education Outreach

    NASA Astrophysics Data System (ADS)

    Danielson, C. A.; DIII-D Education Group

    1996-11-01

    This presentation will focus on education outreach activities at General Atomics that have been expanded to include the general population on science education with a focus on fusion energy. Outreach materials are distributed upon request both nationally and internationally. These materials include a notebook containing copies of DIII--D tour panels, fusion poster, new fusion energy video, new fusion energy brochure, and the electromagnetic spectrum curriculum. The 1996 Fusion Forum (held in the House Caucus Room) included a student/ teacher lunch with Energy Secretary Hazel O'Leary and a private visit to the Forum exhibits. The continuing partnership with Kearny High School includes lectures, job shadowing, internship, equipment donations and an award-winning electric car-racing program. Development of distribution by CD of the existing interactive fusion energy kiosk and a virtual reality tour of the DIII--D facility are underway. The DIII--D fusion education WWW site includes e-mail addresses to ``Ask the Wizard,'' and/or receive GA's outreach materials. Steve Rodecker, a local science teacher, aided by DIII--D fusion staff, won his second Tapestry Award; he also was named the ``1995 National Science Teacher of the Year'' and will be present to share his experiences with the DIII--D educational outreach program.

  3. Two Horizons of Fusion

    ERIC Educational Resources Information Center

    Lo, Mun Ling; Chik, Pakey Pui Man

    2016-01-01

    In this paper, we aim to differentiate the internal and external horizons of "fusion." "Fusion" in the internal horizon relates to the structure and meaning of the object of learning as experienced by the learner. It clarifies the interrelationships among an object's critical features and aspects. It also illuminates the…

  4. Fusion Power Deployment

    SciTech Connect

    J.A. Schmidt; J.M. Ogden

    2002-02-06

    Fusion power plants could be part of a future portfolio of non-carbon dioxide producing energy supplies such as wind, solar, biomass, advanced fission power, and fossil energy with carbon dioxide sequestration. In this paper, we discuss key issues that could impact fusion energy deployment during the last half of this century. These include geographic issues such as resource availability, scale issues, energy storage requirements, and waste issues. The resource needs and waste production associated with fusion deployment in the U.S. should not pose serious problems. One important feature of fusion power is the fact that a fusion power plant should be locatable within most local or regional electrical distribution systems. For this reason, fusion power plants should not increase the burden of long distance power transmission to our distribution system. In contrast to fusion power, regional factors could play an important role in the deployment of renewable resources such as wind, solar and biomass or fossil energy with CO2 sequestration. We examine the role of these regional factors and their implications for fusion power deployment.

  5. FENDL: International reference nuclear data library for fusion applications

    NASA Astrophysics Data System (ADS)

    Pashchenko, A. B.; Wienke, H.; Ganesan, S.

    1996-10-01

    The IAEA Nuclear Data Section, in co-operation with several national nuclear data centres and research groups, has created the first version of an internationally available Fusion Evaluated Nuclear Data Library (FENDL-1). The FENDL library has been selected to serve as a comprehensive source of processed and tested nuclear data tailored to the requirements of the engineering design activity (EDA) of the ITER project and other fusion-related development projects. The present version of FENDL consists of the following sublibraries covering the necessary nuclear input for all physics and engineering aspects of the material development, design, operation and safety of the ITER project in its current EDA phase: FENDL/A-1.1: neutron activation cross-sections, selected from different available sources, for 636 nuclides, FENDL/D-1.0: nuclear decay data for 2900 nuclides in ENDF-6 format, FENDL/DS-1.0: neutron activation data for dosimetry by foil activation, FENDL/C-1.0: data for the fusion reactions D(d,n), D(d,p), T(d,n), T(t,2n), He-3(d,p) extracted from ENDF/B-6 and processed, FENDL/E-1.0:data for coupled neutron—photon transport calculations, including a data library for neutron interaction and photon production for 63 elements or isotopes, selected from ENDF/B-6, JENDL-3, or BROND-2, and a photon—atom interaction data library for 34 elements. The benchmark validation of FENDL-1 as required by the customer, i.e. the ITER team, is considered to be a task of high priority in the coming months. The well tested and validated nuclear data libraries in processed form of the FENDL-2 are expected to be ready by mid 1996 for use by the ITER team in the final phase of ITER EDA after extensive benchmarking and integral validation studies in the 1995-1996 period. The FENDL data files can be electronically transferred to users from the IAEA nuclear data section online system through INTERNET. A grand total of 54 (sub)directories with 845 files with total size of about 2

  6. Atomic Data and Modelling for Fusion: the ADAS Project

    SciTech Connect

    Summers, H. P.; O'Mullane, M. G.

    2011-05-11

    The paper is an update on the Atomic Data and Analysis Structure, ADAS, since ICAM-DATA06 and a forward look to its evolution in the next five years. ADAS is an international project supporting principally magnetic confinement fusion research. It has participant laboratories throughout the world, including ITER and all its partner countries. In parallel with ADAS, the ADAS-EU Project provides enhanced support for fusion research at Associated Laboratories and Universities in Europe and ITER. OPEN-ADAS, sponsored jointly by the ADAS Project and IAEA, is the mechanism for open access to principal ADAS atomic data classes and facilitating software for their use. EXTENDED-ADAS comprises a variety of special, integrated application software, beyond the purely atomic bounds of ADAS, tuned closely to specific diagnostic analyses and plasma models.The current scientific content and scope of these various ADAS and ADAS related activities are briefly reviewed. These span a number of themes including heavy element spectroscopy and models, charge exchange spectroscopy, beam emission spectroscopy and special features which provide a broad baseline of atomic modelling and support. Emphasis will be placed on 'lifting the fundamental data baseline'--a principal ADAS task for the next few years. This will include discussion of ADAS and ADAS-EU coordinated and shared activities and some of the methods being exploited.

  7. Atomic Data and Modelling for Fusion: the ADAS Project

    NASA Astrophysics Data System (ADS)

    Summers, H. P.; O'Mullane, M. G.

    2011-05-01

    The paper is an update on the Atomic Data and Analysis Structure, ADAS, since ICAM-DATA06 and a forward look to its evolution in the next five years. ADAS is an international project supporting principally magnetic confinement fusion research. It has participant laboratories throughout the world, including ITER and all its partner countries. In parallel with ADAS, the ADAS-EU Project provides enhanced support for fusion research at Associated Laboratories and Universities in Europe and ITER. OPEN-ADAS, sponsored jointly by the ADAS Project and IAEA, is the mechanism for open access to principal ADAS atomic data classes and facilitating software for their use. EXTENDED-ADAS comprises a variety of special, integrated application software, beyond the purely atomic bounds of ADAS, tuned closely to specific diagnostic analyses and plasma models. The current scientific content and scope of these various ADAS and ADAS related activities are briefly reviewed. These span a number of themes including heavy element spectroscopy and models, charge exchange spectroscopy, beam emission spectroscopy and special features which provide a broad baseline of atomic modelling and support. Emphasis will be placed on `lifting the fundamental data baseline'—a principal ADAS task for the next few years. This will include discussion of ADAS and ADAS-EU coordinated and shared activities and some of the methods being exploited.

  8. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Chile.

    PubMed

    Aguirre Herrera, Paulina; Morales Pedraza, Jorge

    2009-05-01

    The Tissue Banking Project in Chile started as an idea in 1996. Before 1996 in Chile there were only a few small bone banks working with their own standards of quality. The first tissue bank (LPTR) was established in 1998, with the technical and financial support of the IAEA. Since 2001, the laboratory began to produce tissues for clinical use, starting with the processing of 6 amniotic membranes, 2 femoral heads and 19 batches of pig skin. In 2002, the laboratory began the processing of human skin. Five students from Chile have graduated from training courses carried out in Singapore and in Buenos Aires under the IAEA training program since 1998. The amount of tissues produced and sterilized using ionizing radiation by the LPTR in the last years was 320,000 cm(2) of human skin, 553,600 cm(2) of pig skin, 5,400 cm(2) of amniotic membrane, 49 femoral heads, 3 large bones and 300 g of bovine bone. The patients treated with sterilized tissues produced by the LPTR were 200 deep burns treated with human skin and pig skin, 40 bone transplants from femoral heads, 77 ophthalmologic patients treated with amniotic membrane and 150 bovine bone transplants for dental treatments.

  9. WE-AB-213-04: IAEA Support to Medical Physics in Africa and Latin America: Achievements and Challenges

    SciTech Connect

    Meghzifene, A.

    2015-06-15

    AAPM projects and collaborations in Africa Adam Shulman (AA-SC Chair) The African Affairs Subcommittee (AA-SC) of the AAPM will present a multi-institutional approach to medical physics support in Africa. Current work to increase the quality of care and level of safety for the medical physics practice in Senegal, Ghana, and Zimbabwe will be presented, along with preliminary projects in Nigeria and Botswana. Because the task of addressing the needs of medical physics in countries across Africa is larger than one entity can accomplish on its own, the AA-SC has taken the approach of joining forces with multiple organizations such as Radiating Hope and TreatSafely (NGO’s), the IAEA, companies like BrainLab, Varian and Elekta, medical volunteers and academic institutions such as NYU and Washington University. Elements of current projects include: 1) Distance training and evaluation of the quality of contouring and treatment planning, teaching treatment planning and other subjects, and troubleshooting using modern telecommunications technology in Senegal, Ghana, and Zimbabwe; 2) Assistance in the transition from 2D to 3D in Senegal and Zimbabwe; 3) Assistance in the transition from 3D to IMRT using in-house compensators in Senegal; 4) Modernizing the cancer center in Senegal and increasing safety and; 5) Training on on 3D techniques in Ghana; 6) Assisting a teaching and training radiation oncology center to be built in Zimbabwe; 7) Working with the ISEP Program in Sub-Saharan Africa; 8) Creating instructional videos on linac commissioning; 9) Working on a possible collaboration to train physicists in Nigeria. Building on past achievements, the subcommittee seeks to make a larger impact on the continent, as the number and size of projects increases and more human resources become available. The State of Medical Physics Collaborations and Projects in Latin America Sandra Guzman (Peru) The lack of Medical Physicists (MP) in many Latin American (LA) countries leads to

  10. Measurement of ²²⁶Ra in soil from oil field: advantages of γ-ray spectrometry and application to the IAEA-448 CRM.

    PubMed

    Ceccatelli, A; Katona, R; Kis-Benedek, G; Pitois, A

    2014-05-01

    The analytical performance of gamma-ray spectrometry for the measurement of (226)Ra in TENORM (Technically Enhanced Naturally Occurring Radioactive Material) soil was investigated by the IAEA. Fast results were obtained for characterization and certification of a new TENORM Certified Reference Material (CRM), identified as IAEA-448 (soil from oil field). The combined standard uncertainty of the gamma-ray spectrometry results is of the order of 2-3% for massic activity measurement values ranging from 16500 Bq kg(-1) to 21500 Bq kg(-1). Methodologies used for the production and certification of the IAEA-448 CRM are presented. Analytical results were confirmed by alpha spectrometry. The "t" test showed agreement between alpha and gamma results at 95% confidence level.

  11. The IAEA Coordinated Research Program on HTGR Uncertainty Analysis: Phase I Status and Initial Results

    SciTech Connect

    Strydom, Gerhard; Bostelmann, Friederike; Ivanov, Kostadin

    2014-10-01

    required confidence level. In order to address uncertainty propagation in analysis and methods in the HTGR community the IAEA initiated a Coordinated Research Project (CRP) on the HTGR Uncertainty Analysis in Modelling (UAM) that officially started in 2013. Although this project focuses specifically on the peculiarities of HTGR designs and its simulation requirements, many lessons can be learned from the LWR community and the significant progress already made towards a consistent methodology uncertainty analysis. In the case of LWRs the NRC has already in 1988 amended 10 CFR 50.46 to allow best-estimate (plus uncertainties) calculations of emergency core cooling system performance. The Nuclear Energy Agency (NEA) of the Organization for Economic Co-operation and Development (OECD) also established an Expert Group on "Uncertainty Analysis in Modelling" which finally led to the definition of the "Benchmark for Uncertainty Analysis in Modelling (UAM) for Design, Operation and Safety Analysis of LWRs". The CRP on HTGR UAM will follow as far as possible the on-going OECD Light Water Reactor UAM benchmark activity.

  12. Fusion Studies in Japan

    NASA Astrophysics Data System (ADS)

    Ogawa, Yuichi

    2016-05-01

    A new strategic energy plan decided by the Japanese Cabinet in 2014 strongly supports the steady promotion of nuclear fusion development activities, including the ITER project and the Broader Approach activities from the long-term viewpoint. Atomic Energy Commission (AEC) in Japan formulated the Third Phase Basic Program so as to promote an experimental fusion reactor project. In 2005 AEC has reviewed this Program, and discussed on selection and concentration among many projects of fusion reactor development. In addition to the promotion of ITER project, advanced tokamak research by JT-60SA, helical plasma experiment by LHD, FIREX project in laser fusion research and fusion engineering by IFMIF were highly prioritized. Although the basic concept is quite different between tokamak, helical and laser fusion researches, there exist a lot of common features such as plasma physics on 3-D magnetic geometry, high power heat load on plasma facing component and so on. Therefore, a synergetic scenario on fusion reactor development among various plasma confinement concepts would be important.

  13. Particle beam fusion

    SciTech Connect

    1980-12-31

    Today, in keeping with Sandia Laboratories` designation by the Department of Energy as the lead laboratory for the pulsed power approach to fusion, its efforts include major research activities and the construction of new facilities at its Albuquerque site. Additionally, in its capacity as lead laboratory, Sandia coordinates DOE-supported pulsed power fusion work at other government operated laboratories, with industrial contractors, and universities. The beginning of Sandia`s involvement in developing fusion power was an outgrowth of its contributions to the nation`s nuclear weapon program. The Laboratories` work in the early 1960`s emphasized the use of pulsed radiation environments to test the resistance of US nuclear weapons to enemy nuclear bursts. A careful study of options for fusion power indicated that Sandia`s expertise in the pulsed power field could provide a powerful match to ignite fusion fuel. Although creating test environments is an achieved goal of Sandia`s overall program, this work and other military tasks protected by appropriate security regulations will continue, making full use of the same pulsed power technology and accelerators as the fusion-for-energy program. Major goals of Sandia`s fusion program including the following: (1) complete a particle accelerator to deliver sufficient beam energy for igniting fusion targets; (2) obtain net energy gain, this goal would provide fusion energy output in excess of energy stored in the accelerator; (3) develop a technology base for the repetitive ignition of pellets in a power reactor. After accomplishing these goals, the technology will be introduced to the nation`s commercial sector.

  14. Spherical torus fusion reactor

    DOEpatents

    Martin Peng, Y.K.M.

    1985-10-03

    The object of this invention is to provide a compact torus fusion reactor with dramatic simplification of plasma confinement design. Another object of this invention is to provide a compact torus fusion reactor with low magnetic field and small aspect ratio stable plasma confinement. In accordance with the principles of this invention there is provided a compact toroidal-type plasma confinement fusion reactor in which only the indispensable components inboard of a tokamak type of plasma confinement region, mainly a current conducting medium which carries electrical current for producing a toroidal magnet confinement field about the toroidal plasma region, are retained.

  15. Fusion for Space Propulsion

    NASA Technical Reports Server (NTRS)

    Thio, Y. C. Francis; Schafer, Charles (Technical Monitor)

    2001-01-01

    There is little doubt that humans will attempt to explore and develop the solar system in this century. A large amount of energy will be required for accomplishing this. The need for fusion propulsion is discussed. For a propulsion system, there are three important thermodynamical attributes: (1) The absolute amount of energy available, (2) the propellant exhaust velocity, and (3) the jet power per unit mass of the propulsion system (specific power). For human exploration and development of the solar system, propellant exhaust velocity in excess of 100 km/s and specific power in excess of 10 kW/kg are required. Chemical combustion can produce exhaust velocity up to about 5 km/s. Nuclear fission processes typically result in producing energy in the form of heat that needs to be manipulated at temperatures limited by materials to about 2,800 K. Using the energy to heat a hydrogen propellant increases the exhaust velocity by only a factor of about two. Alternatively the energy can be converted into electricity which is then used to accelerate particles to high exhaust velocity. The necessary power conversion and conditioning equipment, however, increases the mass of the propulsion system for the same jet power by more than two orders of magnitude over chemical system, thus greatly limits the thrust-to-weight ratio attainable. The principal advantage of the fission process is that its development is relatively mature and is available right now. If fusion can be developed, fusion appears to have the best of all worlds in terms of propulsion - it can provide the absolute amount, the propellant exhaust velocity, and the high specific jet power. An intermediate step towards pure fusion propulsion is a bimodal system in which a fission reactor is used to provide some of the energy to drive a fusion propulsion unit. The technical issues related to fusion for space propulsion are discussed. The technical priorities for developing and applying fusion for propulsion are

  16. Laser-Driven Fusion.

    ERIC Educational Resources Information Center

    Gibson, A. F.

    1980-01-01

    Discusses the present status and future prospects of laser-driven fusion. Current research (which is classified under three main headings: laser-matter interaction processes, compression, and laser development) is also presented. (HM)

  17. Viral membrane fusion

    PubMed Central

    Harrison, Stephen C

    2008-01-01

    Infection by viruses having lipid-bilayer envelopes proceeds through fusion of the viral membrane with a membrane of the target cell. Viral ‘fusion proteins’ facilitate this process. They vary greatly in structure, but all seem to have a common mechanism of action, in which a ligand-triggered, large-scale conformational change in the fusion protein is coupled to apposition and merger of the two bilayers. We describe three examples—the influenza virus hemagglutinin, the flavivirus E protein and the vesicular stomatitis virus G protein—in some detail, to illustrate the ways in which different structures have evolved to implement this common mechanism. Fusion inhibitors can be effective antiviral agents. PMID:18596815

  18. Fusion-breeder program

    SciTech Connect

    Moir, R.W.

    1982-11-19

    The various approaches to a combined fusion-fission reactor for the purpose of breeding /sup 239/Pu and /sup 233/U are described. Design aspects and cost estimates for fuel production and electricity generation are discussed. (MOW)

  19. Latin American dose survey results in mammography studies under IAEA programme: radiological protection of patients in medical exposures (TSA3).

    PubMed

    Mora, Patricia; Blanco, Susana; Khoury, Helen; Leyton, Fernando; Cárdenas, Juan; Defaz, María Yolanda; Garay, Fernando; Telón, Flaviano; Aguilar, Juan Garcia; Roas, Norma; Gamarra, Mirtha; Blanco, Daniel; Quintero, Ana Rosa; Nader, Alejandro

    2015-03-01

    Latin American countries (Argentina, Brazil, Chile, Costa Rica, Cuba, Ecuador, El Salvador, Guatemala, Mexico, Nicaragua, Paraguay, Uruguay and Venezuela) working under the International Atomic Energy Agency (IAEA) Technical Cooperation Programme: TSA3 Radiological Protection of Patients in Medical Exposures have joined efforts in the optimisation of radiation protection in mammography practice. Through surveys of patient doses, the region has a unique database of diagnostic reference levels for analogue and digital equipment that will direct future optimisation activities towards the early detection of breast cancer among asymptomatic women. During RLA9/057 (2007-09) 24 institutions participated with analogue equipment in a dose survey. Regional training on methodology and measurement equipment was addressed in May 2007. The mean glandular dose (DG) was estimated using the incident kerma in air and relevant conversion coefficients for both projections craneo caudal and mediolateral oblique (CC and MLO). For Phase 2, RLA9/067 (2010-11), it was decided to include also digital systems in order to see their impact in future dose optimisation activities. Any new country that joined the project received training in the activities through IAEA expert missions. Twenty-nine new institutions participated (9 analogue and 20 digital equipment). A total of 2262 patient doses were collected during this study and from them D(G) (mGy) for both projections were estimated for each institution and country. Regional results (75 percentile in mGy) show for CC and MLO views, respectively: RLA9/057 (analogue) 2.63 and 3.17; RLA/067: 2.57 and 3.15 (analogue) and 2.69 and 2.90 (digital). Regarding only digital equipment for CC and MLO, respectively, computed radiography systems showed 2.59 and 2.78 and direct digital radiography (DDR) systems 2.78 and 3.04. Based on the IAEA Basic Safety Standard (BSS) reference dose (3 mGy), it can be observed that there is enough room to start

  20. Glossary of fusion energy

    NASA Astrophysics Data System (ADS)

    Whitson, M. O.

    1985-02-01

    The Glossary of Fusion Energy is an attempt to present a concise, yet comprehensive collection of terms that may be beneficial to scientists and laymen who are directly or tangentially concerned with this burgeoning energy enterprise. Included are definitions of terms in theoretical plasma physics, controlled thermonuclear fusion, and some related physics concepts. Also, short descriptions of some of the major thermonuclear experiments currently under way in the world today are included.

  1. Cold nuclear fusion

    SciTech Connect

    Tsyganov, E. N.

    2012-02-15

    Recent accelerator experiments on fusion of various elements have clearly demonstrated that the effective cross-sections of these reactions depend on what material the target particle is placed in. In these experiments, there was a significant increase in the probability of interaction when target nuclei are imbedded in a conducting crystal or are a part of it. These experiments open a new perspective on the problem of so-called cold nuclear fusion.

  2. Fusion ignition research experiment

    SciTech Connect

    Dale Meade

    2000-07-18

    Understanding the properties of high gain (alpha-dominated) fusion plasmas in an advanced toroidal configuration is the largest remaining open issue that must be addressed to provide the scientific foundation for an attractive magnetic fusion reactor. The critical parts of this science can be obtained in a compact high field tokamak which is also likely to provide the fastest and least expensive path to understanding alpha-dominated plasmas in advanced toroidal systems.

  3. Magnetized Target Fusion

    NASA Technical Reports Server (NTRS)

    Griffin, Steven T.

    2002-01-01

    Magnetized target fusion (MTF) is under consideration as a means of building a low mass, high specific impulse, and high thrust propulsion system for interplanetary travel. This unique combination is the result of the generation of a high temperature plasma by the nuclear fusion process. This plasma can then be deflected by magnetic fields to provide thrust. Fusion is initiated by a small traction of the energy generated in the magnetic coils due to the plasma's compression of the magnetic field. The power gain from a fusion reaction is such that inefficiencies due to thermal neutrons and coil losses can be overcome. Since the fusion reaction products are directly used for propulsion and the power to initiate the reaction is directly obtained from the thrust generation, no massive power supply for energy conversion is required. The result should be a low engine mass, high specific impulse and high thrust system. The key is to successfully initiate fusion as a proof-of-principle for this application. Currently MSFC is implementing MTF proof-of-principle experiments. This involves many technical details and ancillary investigations. Of these, selected pertinent issues include the properties, orientation and timing of the plasma guns and the convergence and interface development of the "pusher" plasma. Computer simulations of the target plasma's behavior under compression and the convergence and mixing of the gun plasma are under investigation. This work is to focus on the gun characterization and development as it relates to plasma initiation and repeatability.

  4. ITER Fusion Energy

    ScienceCinema

    Dr. Norbert Holtkamp

    2016-07-12

    ITER (in Latin “the way”) is designed to demonstrate the scientific and technological feasibility of fusion energy. Fusion is the process by which two light atomic nuclei combine to form a heavier over one and thus release energy. In the fusion process two isotopes of hydrogen – deuterium and tritium – fuse together to form a helium atom and a neutron. Thus fusion could provide large scale energy production without greenhouse effects; essentially limitless fuel would be available all over the world. The principal goals of ITER are to generate 500 megawatts of fusion power for periods of 300 to 500 seconds with a fusion power multiplication factor, Q, of at least 10. Q ? 10 (input power 50 MW / output power 500 MW). The ITER Organization was officially established in Cadarache, France, on 24 October 2007. The seven members engaged in the project – China, the European Union, India, Japan, Korea, Russia and the United States – represent more than half the world’s population. The costs for ITER are shared by the seven members. The cost for the construction will be approximately 5.5 billion Euros, a similar amount is foreseen for the twenty-year phase of operation and the subsequent decommissioning.

  5. Progress of National Multi-tissue Bank in Uruguay in the International Atomic Energy Agency (IAEA) Tissue Banking Programme.

    PubMed

    Alvarez, Inés; Del Carmen Saldías, Ma; Wodowoz, Olga; Pérez Campos, Héctor; Machin, Daniel; Silva, Walter; Sueta, Patricia; Pérez, Natalia; Acosta Md, Ma del Carmen

    2003-01-01

    The transplant law of 1971 based on informed consent, allows people to register their willingness to be a donor upon death. Since 1978 the governmental Institution, the National Bank of Organs and Tissues (BNOT), have been regulated the organ and tissue donation. Important progress was implemented in the BNOT and specially in the National Multi-tissue Bank (NMTB). Since 2001 with the participation in the IAEA Tissue Banking Programme, Quality System Management has been implemented in the NMTB. New bio-production for radiosterilized tissues for the first time and improved procedures were carried out. As a result an increased production of high-quality tissues was obtained and distributed for clinical use.

  6. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Malaysia.

    PubMed

    Yusof, Norimah; Morales Pedraza, Jorge

    2009-05-01

    The IAEA was instrumental in developing the first Malaysian tissue bank at University Hospital of Universiti Sains Malaysia (HUSM), Kubang Kerian, Kelantan in early 1990s and it was officiated as National Tissue Bank in 1994. Up to date, 38 government and private hospitals have received a supply from the bank. Bone allografts in term of bone chips, morsalised bone and long bones are procured from Malaysian donors. Almost thirty students from Malaysia graduated in the training courses carried out in Singapore since 1998 at regional and interregional levels. Organ donation is more readily accepted by the public at the moments, perhaps due to the vast promotion and advertisement given by the local newspapers and other media, but gradually tissue donation is catching up as well.

  7. Development and validation of a model for tritium accumulation by a freshwater bivalve using the IAEA EMRAS scenarios

    SciTech Connect

    Miyamoto, K.; Inoue, Y.; Takeda, H.; Yanagisawa, K.; Fuma, S.; Ishii, N.; Kuroda, N.; Yankovich, T.; Kim, S. B.; Davis, P.

    2008-07-15

    A six-compartment metabolic model for tritium accumulation by bivalves was developed and validated using two observed data sets supplied in an international IAEA program for validation of environmental models, EMRAS (Environmental Modeling for Radiation Safety, 2003-2007). The data observed were presented in scenarios for model prediction of temporal change of HTO and OBT concentrations in Barnes mussels (Elliptio complanata). In the Uptake Scenario, mussels were transplanted from a site with background tritium concentrations into a lake, which has historically received tritium inputs over time from up-gradient waste management areas. Another data set was presented in the Depuration Scenario for model prediction of the temporal decrease in HTO and OBT concentrations in the mussels following transplantation from the lake into another lake with significantly lower tritium levels. The model simulation was able to reproduce the observation that the amount of hydrogen taken from sediment was very small compared with that taken from lake water. (authors)

  8. Co-ordination of the International Network of Nuclear Structure and Decay Data Evaluators; Summary Report of an IAEA Technical Meeting

    SciTech Connect

    Abriola, D.; Tuli, J.

    2009-03-23

    The IAEA Nuclear Data Section convened the 18th meeting of the International Network of Nuclear Structure and Decay Data Evaluators at the IAEA Headquarters, Vienna, 23 to 27 March 2009. This meeting was attended by 22 scientists from 14 Member States, plus IAEA staff, concerned with the compilation, evaluation and dissemination of nuclear structure and decay data. A summary of the meeting, recommendations/conclusions, data centre reports, and various proposals considered, modified and agreed by the participants are contained within this document. The International Network of Nuclear Structure and Decay Data (NSDD) Evaluators holds biennial meetings under the auspices of the IAEA, and consists of evaluation groups and data service centres in several countries. This network has the objective of providing up-to-date nuclear structure and decay data for all known nuclides by evaluating all existing experimental data. Data resulting from this international evaluation collaboration is included in the Evaluated Nuclear Structure Data File (ENSDF) and published in the journals Nuclear Physics A and Nuclear Data Sheets (NDS).

  9. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Brazil.

    PubMed

    Herson, Marisa Roma; Mathor, Monica Beatriz; Morales Pedraza, Jorge

    2009-05-01

    Until 2000, efforts into organising tissue banks in Brazil had not progressed far beyond small "in house" tissue storage repositories, usually annexed to Orthopaedic Surgery Services. Despite the professional entrepreneurship of those working as part time tissue bankers in such operations, best practices in tissue banking were not always followed due to the lack of regulatory standards, specialised training, adequate facilities and dedicated personnel. The Skin Bank of the Plastic Surgery Department of the Hospital das Clinicas of Sao Paulo, the single skin bank in Brazil, was not an exception. Since 1956, restricted and unpredictable amounts of skin allografts were stored under refrigeration for short periods under very limited quality controls. As in most "tissue banks" at that time in Brazil, medical and nursing staff worked on a volunteer and informal basis undergoing no specific training. IAEA supported the implementation of the tissue banking program in Brazil through the regional project RLA/7/009 "Quality system for the production of irradiated sterilised grafts" (1998-2000) and through two interregional projects INT/6/049 "Interregional Centre of Excellence in Tissue Banking", during the period 2002-2004 and INT/6/052 "Improving the Quality of Production and Uses of Radiation Sterilised Tissue Grafts", during the period 2002-2004. In 2001-2002, the first two years of operation of the HC-Tissue Bank, 53 skin transplants were carried out instead of the previous 4-5 a year. During this period, 75 individuals donated skin tissue, generating approximately 90,000 cm(2) of skin graft. The IAEA program were of great benefit to Brazilian tissue banking which has evolved from scattered make shift small operations to a well-established, high quality tissue banking scenario.

  10. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Peru.

    PubMed

    Gamero, Emma Castro; Morales Pedraza, Jorge

    2009-05-01

    The tissue bank "Rosa Guerzoni Chambergo" (RGCTB) located at the Child's Health Institute was inaugurated in 1996, with the financial and technical support of the IAEA program on radiation and tissue banking. Since 1998, the biological bandage of fresh and lyophilised pigskin, amnion and bone tissue is processed routinely in this bank. In all cases, the tissue is sterilised with the use of Cobalt-60 radiation, process carried out at the Laboratories of Irradiation of the Peruvian Institute of Nuclear Energy (IPEN). The tissue bank in the Child's Health Institute helped to save lives in an accident occurred in Lima, when a New Year's fireworks celebration ran out of control in January 2002. Nearly 300 people died in the tragic blaze and hundreds more were seriously burned and injured. Eight Lima hospitals and clinics suddenly were faced with saving the lives of severely burned men, women and children. Fortunately, authorities were ready to respond to the emergency. More than 1,600 dressings were sterilised and supplied to Lima surgeons. The efforts helped save the lives of patients who otherwise might not have survived the Lima fire. Between 1998 and September 2007, 35,012 tissue grafts were produced and irradiated. Radiation sterilised tissues are used by 20 national medical institutions as well as 17 private health institutions. The tissue bank established in Peru with the support of the IAEA is now producing the following tissues: pigskin dressings, fresh and freeze-dried; bone allografts, chips, wedges and powdered, and amnion dressings air-dried. It is also now leading the elaboration of national standards, assignment being entrusted by ONDT (Organización Nacional de Donación y Transplantes; National Organisation on Donation and Transplant). This among other will permit the accreditation of the tissue bank. In this task is also participating IPEN.

  11. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Korea.

    PubMed

    Kang, Yong-Koo; Yim, Chang-Joon; Morales Pedraza, Jorge

    2009-05-01

    In 1971, first bone bank was established at the Department of Orthopaedic Surgery in Catholic University of Korea. The first clinical case was reported at the Journal of Korean Orthopaedic Association in 1973. Subsequently, more than 60 surgical bone banks were established in the university and teaching hospitals throughout country. In 1990, the Korea Biomaterial Research Institute (KBRI) organised the IAEA/RCA training course on tissue banking. In this course students from 17 countries participated. In 1994 the first collaboration for cadaver tissue recovery was performed. It is important to single out that the various religious groups in Korea have favourable attitudes towards tissue donation, which contributes to the success of the tissue banking programs in the country. The demands of allograft were getting increased in the Korean medical and dental society. Currently, 62 hospital based bone banks, 5 processing tissue banks, 1 regional tissue bank and more than 30 tissue distributors are working in Korea. Based on the U.S.A. usage of more than 1,000,000 grafts per year, 100,000-200,000 grafts will be needed in Korea. Those findings indicate a greatly increased need for training of tissue bank operators. The Korean society will need at least 20-30 tissue bank operators for training in every year. The National Training Centre (NTC) for tissue bank operators and medical personal using the IAEA Curriculum in the Korean languages was established in 2003. From 2004 to 2006, NTC have been trained 40 tissue bank operators. They have produced at least 10,000 tissues per year. These figures indicate a cost saving of US$ 10 million. Within 5 years, NTC will train 100 tissue bank operators. These individuals and their respective banks will provide an increasing number of high quality grafts to the communities they serve at a cost far less than if they were acquired from abroad.

  12. Considerations Related To Human Intrusion In The Context Of Disposal Of Radioactive Waste-The IAEA HIDRA Project

    SciTech Connect

    Seitz, Roger; Kumano, Yumiko; Bailey, Lucy; Markley, Chris; Andersson, Eva; Beuth, Thomas

    2014-01-09

    The principal approaches for management of radioactive waste are commonly termed ‘delay and decay’, ‘concentrate and contain’ and ‘dilute and disperse’. Containing the waste and isolating it from the human environment, by burying it, is considered to increase safety and is generally accepted as the preferred approach for managing radioactive waste. However, this approach results in concentrated sources of radioactive waste contained in one location, which can pose hazards should the facility be disrupted by human action in the future. The International Commission on Radiological Protection (ICRP), International Atomic Energy Agency (IAEA), and Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) agree that some form of inadvertent human intrusion (HI) needs to be considered to address the potential consequences in the case of loss of institutional control and loss of memory of the disposal facility. Requirements are reflected in national regulations governing radioactive waste disposal. However, in practice, these requirements are often different from country to country, which is then reflected in the actual implementation of HI as part of a safety case. The IAEA project on HI in the context of Disposal of RadioActive waste (HIDRA) has been started to identify potential areas for improved consistency in consideration of HI. The expected outcome is to provide recommendations on how to address human actions in the safety case in the future, and how the safety case may be used to demonstrate robustness and optimize siting, design and waste acceptance criteria within the context of a safety case.

  13. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Indonesia.

    PubMed

    Hilmy, Nazly; Manjas, Menkher; Ferdiansyah; Abbas, Basril; Morales Pedraza, Jorge

    2009-05-01

    In 1986, the National Nuclear Energy Agency (Batan) in Jakarta started the research and development for the setting up of a tissue bank (Batan Research Tissue Bank/BRTB) by preserving fresh amnion or fetal membranes by lyophilisation and then sterilising by gamma irradiation. During the period of 1990 and 2000, three more tissue banks were set up, i.e., Biomaterial Centre in Surabaya, Jamil Tissue Bank in Padang, and Sitanala Tissue Bank in Tangerang. In 1994, BRTB produced bone allografts. The banks established under the IAEA program concentrated its work on the production of amnion, bone and soft tissues allografts, as well as bone xenografts. These tissues (allografts and xenografts) were sterilised using gamma irradiation (about 90%) and the rest were sterilized by ETO and those products have been used in the treatment of patients at more than 50 hospitals in Indonesia. In 2004, those tissue banks produced 8,500 grafts and 5,000 of them were amnion grafts for eye treatment and wound dressing. All of those grafts were used for patients as well as for research. In 2006, the production increased to 9,000 grafts. Although the capacity of those banks can produce more grafts, we are facing problems on getting raw materials from suitable donors. To fulfill the demand of bone grafts we also produced bone xenografts. The impact of the IAEA program in tissue banking activities in Indonesia can be summarised as follows: to support the national program on importing substitutes for medical devices. The price of imported tissues are between US$ 50 and US$ 6,000 per graft. Local tissue bank can produce tissues with the same quality with the price for about 10-30% of the imported tissues.

  14. Fusion for Space Propulsion

    NASA Technical Reports Server (NTRS)

    Thio, Y. C. Francis; Schafer, Charles (Technical Monitor)

    2001-01-01

    There is little doubt that humans will attempt to explore and develop the solar system in this century. A large amount of energy will be required for accomplishing this. The need for fusion propulsion is discussed. For a propulsion system, there are three important thermodynamical attributes: (1) The absolute amount of energy available, (2) the propellant exhaust velocity, and (3) the jet power per unit mass of the propulsion system (specific power). For human exploration and development of the solar system, propellant exhaust velocity in excess of 100 km/s and specific power in excess of 10 kW/kg are required. Chemical combustion can produce exhaust velocity up to about 5 km/s. Nuclear fission processes typically result in producing energy in the form of heat that needs to be manipulated at temperatures limited by materials to about 2,800 K. Using the energy to heat a hydrogen propellant increases the exhaust velocity by only a factor of about two. Alternatively the energy can be converted into electricity which is then used to accelerate particles to high exhaust velocity. The necessary power conversion and conditioning equipment, however, increases the mass of the propulsion system for the same jet power by more than two orders of magnitude over chemical system, thus greatly limits the thrust-to-weight ratio attainable. The principal advantage of the fission process is that its development is relatively mature and is available right now. If fusion can be developed, fusion appears to have the best of all worlds in terms of propulsion - it can provide the absolute amount, the propellant exhaust velocity, and the high specific jet power. An intermediate step towards pure fusion propulsion is a bimodal system in which a fission reactor is used to provide some of the energy to drive a fusion propulsion unit. The technical issues related to fusion for space propulsion are discussed. The technical priorities for developing and applying fusion for propulsion are

  15. Myoblast fusion in Drosophila

    SciTech Connect

    Haralalka, Shruti; Abmayr, Susan M.

    2010-11-01

    The body wall musculature of a Drosophila larva is composed of an intricate pattern of 30 segmentally repeated muscle fibers in each abdominal hemisegment. Each muscle fiber has unique spatial and behavioral characteristics that include its location, orientation, epidermal attachment, size and pattern of innervation. Many, if not all, of these properties are dictated by founder cells, which determine the muscle pattern and seed the fusion process. Myofibers are then derived from fusion between a specific founder cell and several fusion competent myoblasts (FCMs) fusing with as few as 3-5 FCMs in the small muscles on the most ventral side of the embryo and as many as 30 FCMs in the larger muscles on the dorsal side of the embryo. The focus of the present review is the formation of the larval muscles in the developing embryo, summarizing the major issues and players in this process. We have attempted to emphasize experimentally-validated details of the mechanism of myoblast fusion and distinguish these from the theoretically possible details that have not yet been confirmed experimentally. We also direct the interested reader to other recent reviews that discuss myoblast fusion in Drosophila, each with their own perspective on the process . With apologies, we use gene nomenclature as specified by Flybase (http://flybase.org) but provide Table 1 with alternative names and references.

  16. Fusion, magnetic confinement

    SciTech Connect

    Berk, H.L.

    1992-08-06

    An overview is presented of the principles of magnetic confinement of plasmas for the purpose of achieving controlled fusion conditions. Sec. 1 discusses the different nuclear fusion reactions which can be exploited in prospective fusion reactors and explains why special technologies need to be developed for the supply of tritium or {sup 3}He, the probable fuels. In Sec. 2 the Lawson condition, a criterion that is a measure of the quality of confinement relative to achieving fusion conditions, is explained. In Sec. 3 fluid equations are used to describe plasma confinement. Specific confinement configurations are considered. In Sec. 4 the orbits of particle sin magneti and electric fields are discussed. In Sec. 5 stability considerations are discussed. It is noted that confinement systems usually need to satisfy stability constraints imposed by ideal magnetohydrodynamic (MHD) theory. The paper culminates with a summary of experimental progress in magnetic confinement. Present experiments in tokamaks have reached the point that the conditions necessary to achieve fusion are being satisfied.

  17. Peaceful Uses of Fusion

    DOE R&D Accomplishments Database

    Teller, E.

    1958-07-03

    Applications of thermonuclear energy for peaceful and constructive purposes are surveyed. Developments and problems in the release and control of fusion energy are reviewed. It is pointed out that the future of thermonuclear power reactors will depend upon the construction of a machine that produces more electric energy than it consumes. The fuel for thermonuclear reactors is cheap and practically inexhaustible. Thermonuclear reactors produce less dangerous radioactive materials than fission reactors and, when once brought under control, are not as likely to be subject to dangerous excursions. The interaction of the hot plasma with magnetic fields opens the way for the direct production of electricity. It is possible that explosive fusion energy released underground may be harnessed for the production of electricity before the same feat is accomplished in controlled fusion processes. Applications of underground detonations of fission devices in mining and for the enhancement of oil flow in large low-specific-yield formations are also suggested.

  18. Spherical torus fusion reactor

    DOEpatents

    Peng, Yueng-Kay M.

    1989-01-01

    A fusion reactor is provided having a near spherical-shaped plasma with a modest central opening through which straight segments of toroidal field coils extend that carry electrical current for generating a toroidal magnet plasma confinement fields. By retaining only the indispensable components inboard of the plasma torus, principally the cooled toroidal field conductors and in some cases a vacuum containment vessel wall, the fusion reactor features an exceptionally small aspect ratio (typically about 1.5), a naturally elongated plasma cross section without extensive field shaping, requires low strength magnetic containment fields, small size and high beta. These features combine to produce a spherical torus plasma in a unique physics regime which permits compact fusion at low field and modest cost.

  19. Spherical torus fusion reactor

    DOEpatents

    Peng, Yueng-Kay M.

    1989-04-04

    A fusion reactor is provided having a near spherical-shaped plasma with a modest central opening through which straight segments of toroidal field coils extend that carry electrical current for generating a toroidal magnet plasma confinement fields. By retaining only the indispensable components inboard of the plasma torus, principally the cooled toroidal field conductors and in some cases a vacuum containment vessel wall, the fusion reactor features an exceptionally small aspect ratio (typically about 1.5), a naturally elongated plasma cross section without extensive field shaping, requires low strength magnetic containment fields, small size and high beta. These features combine to produce a spherical torus plasma in a unique physics regime which permits compact fusion at low field and modest cost.

  20. Ceramics for fusion applications

    SciTech Connect

    Clinard, F.W. Jr.

    1986-01-01

    Ceramics are required for a variety of uses in both near-term fusion devices and in commercial powerplants. These materials must retain adequate structural and electrical properties under conditions of neutron, particle, and ionizing irradiation; thermal and applied stresses; and physical and chemical sputtering. Ceramics such as Al/sub 2/O/sub 3/, MgAl/sub 2/O/sub 4/, BeO, Si/sub 3/N/sub 4/ and SiC are currently under study for fusion applications, and results to date show widely-varying response to the fusion environment. Materials can be identified today which will meet initial operating requirements, but improvements in physical properties are needed to achieve satisfactory lifetimes for critical applications.

  1. Fusion research at ORNL

    SciTech Connect

    Not Available

    1982-03-01

    The ORNL Fusion Program includes the experimental and theoretical study of two different classes of magnetic confinement schemes - systems with helical magnetic fields, such as the tokamak and stellarator, and the ELMO Bumpy Torus (EBT) class of toroidally linked mirror systems; the development of technologies, including superconducting magnets, neutral atomic beam and radio frequency (rf) heating systems, fueling systems, materials, and diagnostics; the development of databases for atomic physics and radiation effects; the assessment of the environmental impact of magnetic fusion; and the design of advanced demonstration fusion devices. The program involves wide collaboration, both within ORNL and with other institutions. The elements of this program are shown. This document illustrates the program's scope; and aims by reviewing recent progress.

  2. Simulation of Fusion Plasmas

    ScienceCinema

    Holland, Chris [UC San Diego, San Diego, California, United States

    2016-07-12

    The upcoming ITER experiment (www.iter.org) represents the next major milestone in realizing the promise of using nuclear fusion as a commercial energy source, by moving into the “burning plasma” regime where the dominant heat source is the internal fusion reactions. As part of its support for the ITER mission, the US fusion community is actively developing validated predictive models of the behavior of magnetically confined plasmas. In this talk, I will describe how the plasma community is using the latest high performance computing facilities to develop and refine our models of the nonlinear, multiscale plasma dynamics, and how recent advances in experimental diagnostics are allowing us to directly test and validate these models at an unprecedented level.

  3. Intense fusion neutron sources

    NASA Astrophysics Data System (ADS)

    Kuteev, B. V.; Goncharov, P. R.; Sergeev, V. Yu.; Khripunov, V. I.

    2010-04-01

    The review describes physical principles underlying efficient production of free neutrons, up-to-date possibilities and prospects of creating fission and fusion neutron sources with intensities of 1015-1021 neutrons/s, and schemes of production and application of neutrons in fusion-fission hybrid systems. The physical processes and parameters of high-temperature plasmas are considered at which optimal conditions for producing the largest number of fusion neutrons in systems with magnetic and inertial plasma confinement are achieved. The proposed plasma methods for neutron production are compared with other methods based on fusion reactions in nonplasma media, fission reactions, spallation, and muon catalysis. At present, intense neutron fluxes are mainly used in nanotechnology, biotechnology, material science, and military and fundamental research. In the near future (10-20 years), it will be possible to apply high-power neutron sources in fusion-fission hybrid systems for producing hydrogen, electric power, and technological heat, as well as for manufacturing synthetic nuclear fuel and closing the nuclear fuel cycle. Neutron sources with intensities approaching 1020 neutrons/s may radically change the structure of power industry and considerably influence the fundamental and applied science and innovation technologies. Along with utilizing the energy produced in fusion reactions, the achievement of such high neutron intensities may stimulate wide application of subcritical fast nuclear reactors controlled by neutron sources. Superpower neutron sources will allow one to solve many problems of neutron diagnostics, monitor nano-and biological objects, and carry out radiation testing and modification of volumetric properties of materials at the industrial level. Such sources will considerably (up to 100 times) improve the accuracy of neutron physics experiments and will provide a better understanding of the structure of matter, including that of the neutron itself.

  4. Atomic data for fusion

    SciTech Connect

    Hunter, H.T.; Kirkpatrick, M.I.; Alvarez, I.; Cisneros, C.; Phaneuf, R.A.; Barnett, C.F.

    1990-07-01

    This report provides a handbook of recommended cross-section and rate-coefficient data for inelastic collisions between hydrogen, helium and lithium atoms, molecules and ions, and encompasses more than 400 different reactions of primary interest in fusion research. Published experimental and theoretical data have been collected and evaluated, and the recommended data are presented in tabular, graphical and parametrized form. Processes include excitation and spectral line emission, charge exchange, ionization, stripping, dissociation and particle interchange reactions. The range of collision energies is appropriate to applications in fusion-energy research.

  5. Fusion welding process

    DOEpatents

    Thomas, Kenneth C.; Jones, Eric D.; McBride, Marvin A.

    1983-01-01

    A process for the fusion welding of nickel alloy steel members wherein a ferrite containing pellet is inserted into a cavity in one member and melted by a welding torch. The resulting weld nugget, a fusion of the nickel containing alloy from the members to be welded and the pellet, has a composition which is sufficiently low in nickel content such that ferrite phases occur within the weld nugget, resulting in improved weld properties. The steel alloys encompassed also include alloys containing carbon and manganese, considered nickel equivalents.

  6. Fusion for Space Propulsion

    NASA Technical Reports Server (NTRS)

    Thio, Y. C. Francis; Schmidt, George R.; Santarius, John F.; Turchi, Peter J.; Siemon, Richard E.; Rodgers, Stephen L. (Technical Monitor)

    2002-01-01

    The need for fusion propulsion for interplanetary flights is discussed. For a propulsion system, there are three important system attributes: (1) The absolute amount of energy available, (2) the propellant exhaust velocity, and (3) the jet power per unit mass of the propulsion system (specific power). For efficient and affordable human exploration of the solar system, propellant exhaust velocity in excess of 100 km/s and specific power in excess of 10 kW/kg are required. Chemical combustion obviously cannot meet the requirement in propellant exhaust velocity. Nuclear fission processes typically result in producing energy in the form of heat that needs to be manipulated at temperatures limited by materials to about 2,800 K. Using the fission energy to heat a low atomic weight propellant produces propellant velocity of the order of 10 kinds. Alternatively the fission energy can be converted into electricity that is used to accelerate particles to high exhaust velocity. However, the necessary power conversion and conditioning equipment greatly increases the mass of the propulsion system. Fundamental considerations in waste heat rejection and power conditioning in a fission electric propulsion system place a limit on its jet specific power to the order of about 0.2 kW/kg. If fusion can be developed for propulsion, it appears to have the best of all worlds - it can provide the largest absolute amount of energy, the propellant exhaust velocity (> 100 km/s), and the high specific jet power (> 10 kW/kg). An intermediate step towards fusion propulsion might be a bimodal system in which a fission reactor is used to provide some of the energy to drive a fusion propulsion unit. There are similarities as well as differences between applying fusion to propulsion and to terrestrial electrical power generation. The similarities are the underlying plasma and fusion physics, the enabling component technologies, the computational and the diagnostics capabilities. These physics and

  7. Multisensor data fusion algorithm development

    SciTech Connect

    Yocky, D.A.; Chadwick, M.D.; Goudy, S.P.; Johnson, D.K.

    1995-12-01

    This report presents a two-year LDRD research effort into multisensor data fusion. We approached the problem by addressing the available types of data, preprocessing that data, and developing fusion algorithms using that data. The report reflects these three distinct areas. First, the possible data sets for fusion are identified. Second, automated registration techniques for imagery data are analyzed. Third, two fusion techniques are presented. The first fusion algorithm is based on the two-dimensional discrete wavelet transform. Using test images, the wavelet algorithm is compared against intensity modulation and intensity-hue-saturation image fusion algorithms that are available in commercial software. The wavelet approach outperforms the other two fusion techniques by preserving spectral/spatial information more precisely. The wavelet fusion algorithm was also applied to Landsat Thematic Mapper and SPOT panchromatic imagery data. The second algorithm is based on a linear-regression technique. We analyzed the technique using the same Landsat and SPOT data.

  8. Workmanship standards for fusion welding

    NASA Technical Reports Server (NTRS)

    Phillips, M. D.

    1967-01-01

    Workmanship standards manual defines practices, that adhere to rigid codes and specifications, for fusion welding of component piping, assemblies, and systems. With written and pictorial presentations, it is part of the operating procedure for fusion welding.

  9. Fusion Engineering Device design description

    SciTech Connect

    Flanagan, C.A.; Steiner, D.; Smith, G.E.

    1981-12-01

    The US Magnetic Fusion Engineering Act of 1980 calls for the operation of a Fusion Engineering Device (FED) by 1990. It is the intent of the Act that the FED, in combination with other testing facilities, will establish the engineering feasibility of magnetic fusion energy. During 1981, the Fusion Engineering Design Center (FEDC), under the guidance of a Technical Management Board (TMB), developed a baseline design for the FED. This design is summarized herein.

  10. Fusion engineering device design description

    SciTech Connect

    Flanagan, C.A.; Steiner, D.; Smith, G.E.

    1981-12-01

    The US Magnetic Fusion Engineering Act of 1980 calls for the operation of a Fusion Engineering Device (FED) by 1990. It is the intent of the Act that the FED, in combination with other testing facilities, will establish the engineering feasibility of magnetic fusion energy. During 1981, the Fusion Engineering Design Center (FEDC), under the guidance of a Technical Management Board (TMB), developed a baseline design for the FED. This design is summarized herein.

  11. Mars manned fusion spaceship

    SciTech Connect

    Hedrick, J.; Buchholtz, B.; Ward, P.; Freuh, J.; Jensen, E.

    1991-01-01

    Fusion Propulsion has an enormous potential for space exploration in the near future. In the twenty-first century, a usable and efficient fusion rocket will be developed and in use. Because of the great distance between other planets and Earth, efficient use of time, fuel, and payload is essential. A nuclear spaceship would provide greater fuel efficiency, less travel time, and a larger payload. Extended missions would give more time for research, experiments, and data acquisition. With the extended mission time, a need for an artificial environment exists. The topics of magnetic fusion propulsion, living modules, artificial gravity, mass distribution, space connection, and orbital transfer to Mars are discussed. The propulsion system is a magnetic fusion reactor based on a tandem mirror design. This allows a faster, shorter trip time and a large thrust to weight ratio. The fuel proposed is a mixture of deuterium and helium. Helium can be obtained from lunar mining. There will be minimal external radiation from the reactor resulting in a safe, efficient propulsion system.

  12. Mars manned fusion spaceship

    NASA Technical Reports Server (NTRS)

    Hedrick, James; Buchholtz, Brent; Ward, Paul; Freuh, Jim; Jensen, Eric

    1991-01-01

    Fusion Propulsion has an enormous potential for space exploration in the near future. In the twenty-first century, a usable and efficient fusion rocket will be developed and in use. Because of the great distance between other planets and Earth, efficient use of time, fuel, and payload is essential. A nuclear spaceship would provide greater fuel efficiency, less travel time, and a larger payload. Extended missions would give more time for research, experiments, and data acquisition. With the extended mission time, a need for an artificial environment exists. The topics of magnetic fusion propulsion, living modules, artificial gravity, mass distribution, space connection, and orbital transfer to Mars are discussed. The propulsion system is a magnetic fusion reactor based on a tandem mirror design. This allows a faster, shorter trip time and a large thrust to weight ratio. The fuel proposed is a mixture of deuterium and helium-3. Helium-3 can be obtained from lunar mining. There will be minimal external radiation from the reactor resulting in a safe, efficient propulsion system.

  13. Auditory Fusion in Children.

    ERIC Educational Resources Information Center

    Davis, Sylvia M.; McCroskey, Robert L.

    1980-01-01

    Focuses on auditory fusion (defined in terms of a listerner's ability to distinguish paired acoustic events from single acoustic events) in 3- to 12-year-old children. The subjects listened to 270 pairs of tones controlled for frequency, intensity, and duration. (CM)

  14. A fusion of minds

    NASA Astrophysics Data System (ADS)

    Corfield, Richard

    2013-02-01

    Mystery still surrounds the visit of the astronomer Sir Bernard Lovell to the Soviet Union in 1963. But his collaboration - and that of other British scientists - eased geopolitical tensions at the height of the Cold War and paved the way for today's global ITER fusion project, as Richard Corfield explains.

  15. Synergetic Multisensor Fusion

    DTIC Science & Technology

    1990-11-30

    technology have led to increased interest in using DEMs for navigation and other applications. In particular, DEMs are attractive for use in aircraft...Multisensor Fusion for Computer Vision [67]. 30 6. POSI!IONAL zSTIM&TION TECEnIQUzs FOR AN OUTDOOR MOBLE ROBOT The autonomous navigation of mobile robots is

  16. Fusion reactor materials

    SciTech Connect

    none,

    1989-01-01

    This paper discuses the following topics on fusion reactor materials: irradiation, facilities, test matrices, and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; fundamental mechanical behavior; radiation effects; development of structural alloys; solid breeding materials; and ceramics.

  17. Human-Centered Fusion Framework

    SciTech Connect

    Posse, Christian; White, Amanda M.; Beagley, Nathaniel

    2007-05-16

    In recent years the benefits of fusing signatures extracted from large amounts of distributed and/or heterogeneous data sources have been largely documented in various problems ranging from biological protein function prediction to cyberspace monitoring. In spite of significant progress in information fusion research, there is still no formal theoretical framework for defining various types of information fusion systems, defining and analyzing relations among such types, and designing information fusion systems using a formal method approach. Consequently, fusion systems are often poorly understood, are less than optimal, and/or do not suit user needs. To start addressing these issues, we outline a formal humancentered fusion framework for reasoning about fusion strategies. Our approach relies on a new taxonomy for fusion strategies, an alternative definition of information fusion in terms of parameterized paths in signature related spaces, an algorithmic formalization of fusion strategies and a library of numeric and dynamic visual tools measuring the impact as well as the impact behavior of fusion strategies. Using a real case of intelligence analysis we demonstrate that the proposed framework enables end users to rapidly 1) develop and implement alternative fusion strategies, 2) understand the impact of each strategy, 3) compare the various strategies, and 4) perform the above steps without having to know the mathematical foundations of the framework. We also demonstrate that the human impact on a fusion system is critical in the sense that small changes in strategies do not necessarily correspond to small changes in results.

  18. Graphite for fusion energy applications

    SciTech Connect

    Eatherly, W.P.; Clausing, R.E.; Strehlow, R.A.; Kennedy, C.R.; Mioduszewski, P.K.

    1987-03-01

    Graphite is in widespread and beneficial use in present fusion energy devices. This report reflects the view of graphite materials scientists on using graphite in fusion devices. Graphite properties are discussed with emphasis on application to fusion reactors. This report is intended to be introductory and descriptive and is not intended to serve as a definitive information source. (JDH)

  19. 23RD International Conference on Phenomena in Ionized Gases, Volume 5

    DTIC Science & Technology

    1998-12-01

    outer earthed electrode. variation of dielectric constant with magnetic fields. In The radial distribution of the ion density was measured this paper...insulated phenomena of corona and leader formation were both from its supporting tripod and the earthed vessel. affected by variations in humidity...the current flowing in the gap before with a 75CI resistance and earthed . Any current flowing breakdown. The time of occurrence of the impulse- in the

  20. High Achievers: 23rd Annual Survey. Attitudes and Opinions from the Nation's High Achieving Teens.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Northbrook, IL.

    This report presents data from an annual survey of high school student leaders and high achievers. It is noted that of the nearly 700,000 high achievers featured in this edition, 5,000 students were sent the survey and 2,092 questionnaires were completed. Subjects were high school juniors and seniors selected for recognition by their principals or…

  1. Current research in nuclear medicine and molecular imaging: highlights of the 23rd Annual EANM Congress.

    PubMed

    Carrió, Ignasi

    2011-02-01

    The most recent research developments in nuclear medicine and molecular imaging were presented at the 2010 Annual Congress of the EANM. This review summarizes some of the most relevant contributions made in the fields of oncology, cardiovascular science, neurology and psychiatry, technological innovation and novel tracers. Presentations covered basic and clinical research in nuclear medicine and molecular imaging, and diagnostic and therapeutic applications of radioisotopes and radiopharmaceuticals on a global scale. The results reported demonstrate that investigative strategies using nuclear medicine techniques facilitate effective diagnosis and management of patients with most prevalent disease states. At the same time novel tracers and technologies are being explored, which hold promise for future new applications of nuclear medicine and molecular imaging in research and clinical practice.

  2. Proceedings of the Annual State Conference on Educational Research "Accountability and the Curriculum" (23rd).

    ERIC Educational Resources Information Center

    California Advisory Council on Educational Research, Burlingame.

    Papers presented at the Conference include: "Biopsy of an Educational Growth" (J.R. Harsh), "Performance Contracting--The Dallas Experiment" (D.R. Waldrip), "Teaching Performance Tests at Three Levels of Accountability" (W.J. Popham), "Problems of Implementing the Writing of Behavioral Objectives" (R.M. Carson), "Program Planning Impact…

  3. CRYSTAL-FACE Analysis and Simulations of the July 23rd Extended Anvil Case

    NASA Technical Reports Server (NTRS)

    Starr, David

    2003-01-01

    A key focus of CRYSTAL-FACE (Cirrus Regional Study of Tropical Anvils and cirrus Layers - Florida Area Cirrus Experiment) was the generation and subsequent evolution of cirrus outflow from deep convective cloud systems. Present theoretical background and motivations will be discussed. An integrated look at the observations of an extended cirrus anvil cloud system observed on 23 July 2002 will be presented, including lidar and millimeter radar observation; from NASA s ER-2 and in-situ observations from NASA s WB-57 and University of North Dakota Citation. The observations will be compared to results of simulations using 1-D and 2-D high-resolution (100 meter) cloud resolving models. The CRMs explicitly account for cirrus microphysical development by resolving the evolving ice crystal size distribution (bin model) in time and space. Both homogeneous and heterogeneous nucleation are allowed in the model. The CRM simulations are driven using the output of regional simulations using MM5 that produces deep convection similar to what was observed. The MM5 model employs a 2 km inner grid (32 layers) over a 360 km domain, nested within a 6-km grid over a 600-km domain. Initial and boundary conditions for the 36-hour MM5 simulation are taken from NCEP Eta model analysis at 32 km resolution. Key issues to be explored are the settling of the observed anvil versus the model simulations, and comparisons of dynamical properties, such as vertical motions, occurring in the observations and models. The former provides an integrated measure of the validity of the model microphysics (fallspeed) while the latter is the key factor in forcing continued ice generation.

  4. International SAMPE Technical Conference, 23rd, Kiamesha Lake, NY, Oct. 21-24, 1991, Proceedings

    SciTech Connect

    Carri, R.L.; Poveromo, L.M.; Gauland, J. )

    1991-01-01

    The present conference discusses the cost of composite structures, microwave processing of thermoset resin-matrix composites at high pressure, the impact damage-tolerance of helicopter sandwich structures, novel fluorinated polybenzoxazole thermoplastics, low expansion coefficient polyimides containing metal-ion additives, thermoplastic polyimides for supersonic airframes, material properties and laser cutting of composites, fiber-matrix bond tests in composites, and a global/local stress analysis of stitched composites. Also discussed are moldless composite aircraft wing structural design modifications, advances in anhydride epoxy systems, medical applications of advanced composites, metal-joining processes for space fabrication, close-tolerance plastic master molds, the ballistic energy absorption of composites, soft and hard composite armors, resin-transfer molding of 3D composites, toughened cyanate ester resins, and thermoforming of thermoplastics.

  5. Proceedings of the Conference on the Design of Experiments (23rd) S

    DTIC Science & Technology

    1978-07-01

    uaaaa m W W Na~~S ww W V60 VAW0W ~ B W0~ £9 ON .9a 9k 9 wil9 IS99 ’A R A O Z"P sw OPO £W ’ V WeIN gmsN𔃾I 4W "-P(~V aW 0 &h.EaU b. w 4. It mama ...adjunct to surgery and radiation in the treatment of childhood rhabdomyosarcoma. The endpoint for analysis was the re-appearance of tumor , whether at the...group IB were concurrently randomized with the controls, both these groups having apparently had their tumors completely resected; while IIA

  6. International Symposium on Combustion (23rd) Held in Orleans, France on 22-27 July 1990

    DTIC Science & Technology

    1991-01-01

    they nition of stretch’ 9 escape the type of complications mentioned above. A number of theoretical analyses of spherical flames F = ( l /A) dA/dt, (1...assumed, for the purposes of acoustic analysis, to be concentrated at a fixed axial station x = Li. In the present analyses , L , is taken to be the...SylpOSi~~iI- 16. itl SOL M P ) u B. AN C LK T, M. B. S e - tcfltil~I)on CoilI~wI. .275 The Corn- te31t Theoinl (1nelat l ~) o C mh, h u stio nst o n

  7. Solar modulation of GCR electrons over the 23rd solar minimum with PAMELA

    NASA Astrophysics Data System (ADS)

    Munini, R.; Di Felice, V.; Adriani, O.; Barbarino, G. C.; Bazilevskaya, G. A.; Bellotti, R.; Boezio, M.; Bogomolov, E. A.; Bongi, M.; Bonvicini, V.; Bottai, S.; Bruno, A.; Cafagna, F.; Campana, D.; Carlson, P.; Casolino, M.; Castellini, G.; De Donato, C.; De Santis, C.; De Simone, N.; Formato, V.; Galper, A. M.; Karelin, A. V.; Koldashov, S. V.; Koldobskiy, S.; Krutkov, S. Y.; Kvashnin, A. N.; Leonov, A.; Malakhov, V.; Marcelli, L.; Martucci, M.; Mayorov, A. G.; Menn, W.; Merge, M.; Mikhailov, V. V.; Mocchiutti, E.; Monaco, A.; Mori, N.; Osteria, G.; Palma, F.; Panico, B.; Papini, P.; Pearce, M.; Picozza, P.; Ricci, M.; Ricciarini, S. B.; Sarkar, R.; Scotti, V.; Simon, M.; Sparvoli, R.; Spillantini, P.; Stozhkov, Y. I.; Vacchi, A.; Vannuccini, E.; Vasilyev, G.; Voronov, S. A.; Yurkin, Y. T.; Zampa, G.; Zampa, N.; Potgieter, M. S.; Vos, E. E.

    2015-08-01

    The satellite-borne PAMELA experiment has been continuously collecting data since 15th June 2006, when it was launched from the Baikonur cosmodrome to detect the charged component of cosmic rays over a wide energy range and with unprecedented statistics. The apparatus design is particularly suited for particle and antiparticle identification. The PAMELA experiment has measured the electron spectrum at Earth in great detail, extending up to about 100 GeV and down to about 200 MeV. The galactic cosmic ray electron spectra for 2007 and 2009, i.e. measured during the A<0 solar minimum of solar cycle 23, are presented. These fluxes provide important information for the study of charge dependent solar modulation effects.

  8. Mosquito vector biology and control in Latin America - a 23rd symposium

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The 23nd Annual Latin American Symposium presented by the American Mosquito Control Association (AMCA) was held as part of the 79th Annual Meeting in Atlantic City, NJ in February 2013. The principal objective, as for the previous 22 symposia, was to promote participation in the AMCA by vector contr...

  9. Kokes Awards for the 23rd North American Catalysis Society Meeting

    SciTech Connect

    Jacobs, Gary

    2014-01-31

    The Tri-State Catalysis Society awarded 107 Kokes Travel Awards. The program was very successful and to date this was the most Kokes Travel Awards ever awarded at a North American Catalysis Society Meeting. It provided students who merited an award the opportunity to attend the meeting, present a paper in the form of either an oral presentation or a poster presentation, and to serve the North American Catalysis Society by participating in the organization of the meeting. Students worked very hard during the week of the meeting to make it a success. Financial support for the Kokes awards was provided by DOE, NSF, NACS, as well as the Tri-State Catalysis Society, the latter through fund raising activities, and other donations. AT the meeting, each student received over $1050 in kind to offset the costs of registration fees ($260), hotel accommodations ($295.7), transportation ($400 travel allowance), as well as T-shirts ($20), and banquet tickets ($95 provided by donations from society members). In addition, for the first time, students received certificates that were signed by the President of NACS, Professor Enrique Iglesia, and by the Kokes Awards Chair, Gary Jacobs (see last page). A list of meeting co-chairs (i.e., Uschi M. Graham, Umit S. Ozkan, and Madan Bhassin) and the honorary chair (Burtron H. Davis) was also included on the certificate, along with the name of the recipient. The awardees were chosen on a merit-based guideline which also included the requirements of having a presentation accepted at the meeting and being a student at a North American University. The Richard J. Kokes Student Travel Award Committee (Gary Jacobs, Rodney Andrews, and Peter Smirniotis) with help from the Organizing Committee were able to secure money from four sources as detailed in Table 1. As detailed by our Treasurer, Dr. Helge Toufar of Clariant, the total amount spent was $105,000.

  10. Higher Education and Service to Our States. Proceedings of the 23rd Legislative Work Conference.

    ERIC Educational Resources Information Center

    Southern Regional Education Board, Atlanta, GA.

    Papers include: Faculty Collective Bargaining in Higher Education; The University in Service to State Government; The New Environment for State Planning and Coordination of Higher Education; American Medical Education in the Year 209; Meeting the Needs of the States for Optometrists; and Meeting the Needs of States in Veterinary Medicine. (MJM)

  11. Preliminary Analysis and Simulations of July 23rd Extended Anvil Case

    NASA Technical Reports Server (NTRS)

    Lin, R.-F.; Demoz, B.; McGill, M.; Heymsfield, G.; Sassen, K.; Bui, P.; Heymsfield, A.; Halverson, J.; Rickenbach, T.; Poellot, M.; Lare, A.

    2003-01-01

    A key focus of CRYSTAL-FACE (Cirrus Regional Study of Tropical Anvils and cirrus Layers - Florida Area Cirrus Experiment) was the generation and subsequent evolution of cirrus outflow from deep convective cloud systems. A preliminary integrated look at the observations of an extended cirrus anvil cloud system observed on 23 July 2002 will be presented, including lidar and millimeter radar observations from NASA's ER-2 and in- situ observations from NASA's WB-57 and University of North Dakota Citation. The observations will be compared to preliminary results of simulations using 1-D and 2-D high-resolution (100 meter) cloud resolving models. The CRMs explicitly account for cirrus microphysical development by resolving the evolving ice crystal size distribution (bin model) in time and space. Both homogeneous and heterogeneous nucleation are allowed in the model. The CRM simulations are driven using the output of regional simulations using MM5 that produces deep convection similar to what was observed. The MM5 model employs a 2 km inner grid (32 layers) over a 360 km domain, nested within a 6 km grid over a 600 km domain. Initial and boundary conditions for the 36- hour MM5 simulation are taken from NCEP Eta model analysis at 32 km resolution. Key issues to be explored are the settling of the observed anvil versus the model simulations, and comparisons of dynamical properties, such as vertical motions, occurring in the observations and models. The former provides an integrated measure of the validity of the model microphysics (fallspeed) while the latter is the key factor in forcing continued ice generation.

  12. Reading and the Exceptional Child; Highlights of the Annual Reading Conference (23rd, Lehigh University).

    ERIC Educational Resources Information Center

    Kender, Joseph P., Ed.

    This book presents eleven papers on reading and the exceptional child. Part 1, "Development of Positive Self-Concept in Readers," contains: "In Search of Self" by Marvin D. Glock, "A Mental Hygiene Approach to Reading" By Ruth Jackson, and "The Videotape Playback as an Adjunct to Developing Positive Self-Regard" by Joan C. Barth. Part 2, "Teaching…

  13. Preliminary Inventories: Vietnam War Collection, 23rd Infantry (Americal) Division, 1967-1971.

    DTIC Science & Technology

    1982-07-01

    too 0in06s WWuS "M USES eased ~.. Somd osm -dbdrV EIQDA Records Managemnt Division s.m-m 11S * now isral The Adjutant Cenerl’s Office NINE UAYU3U(Ch P ...Records Management Division 1 July 1982 Department of the Am (DARO-AMR- P ) 14 NUMBER OF PAGES Alexandria. Virginia 22331 203 14 MONITORING AGENCY NAME...A AODREII 19ferinI 1 CoR&Idbd 0Mmid) IS. SECURITY CLASS. W. SN. uqpslj Programs Branch (Records Management Division) Department of the Army (DAG-AMR- P

  14. Preliminary assessment of landslides resulting from the earthquake of 23rd November 1980 in Southern Italy.

    PubMed

    Alexander, D

    1981-12-01

    This paper examines the hazards, mechanisms and effects of landsliding provoked by the 1980 earthquake in Campania and Basilicata Regions, Southern Italy. The effects of seismically-induced mass-movement are assessed with respect to slope stability and damage to both settlements and roads. Whereas the mechanism of cyclic loading of soils, which can give rise to landslides, is different from the pore-pressure, gravity loading and strength-reduction mechanisms that normally cause slope failure, the morphology of slides is often indistinguishable and this made it difficult to identify which slides were directly caused by the earthquake. However, creep in potential shear planes undoubtably became more widespread, and the incidence of small, bowl-shaped slides Increased as a direct result of the earthquake. Although variations in the detailed stress-pattern within individual slopes meant that some very mobile soil and rock masses did not move, 36 settlements reported landslide damage and 29 roads were affected by landslides occurring during the earthquake and its immediate aftermath. A full assessment of the disaster, together with an explanation of the geography of the disaster area, can be found in Alexander (1982).

  15. 23RD International Conference on Phenomena in Ionized Gases, Volume 3

    DTIC Science & Technology

    2007-11-02

    P.Andre’, Yu.A.Barinov 2 G.Faure1, V.B.Kaplan 2 , A.Lefort1, S.M. Shkol’nik2 . 1. LAEPT. CNRS URA 828, University. Blaise Pascal , 24, Avenue des...Lorthioir S., Blaise G., Fiala A., Pitchford L.C. CHARACTERISTICS OF LOW POWER HF 10-CM TECHNOLOGICAL ION SOURCE 111-88 Kondranin S.G., Kralkina E.A...spectrometric analysis. S. Baude*, S Lorthioir*, G. Blaise **, A. Fiala*** and L.C. Pitchford*** *CEA, Centre d’Etudes de Bruyhres-le-Chatel BP12

  16. 23RD International Conference on Phenomena in Ionized Gases, Volume 1

    DTIC Science & Technology

    2007-11-02

    Universitd Blaise Pascal , 24, Avenue des Landais, F 63177 Aubi~re cedex, France. 2. LMCTS ,CNRS URA 320, Universitd de Limoges, 123, Av. Albet Thomas, 87060...252 Badie J.M. IV- 192 Bisch C. IV-192 Andreazza-Vignolles C. IV-252 Bagatin M. 11-262 Blaise G. 111-86 Andrieux M. IV-192 IV-134 Blanc E. 11-10 Anikin

  17. 23RD International Conference on Phenomena in Ionized Gases, Volume 2

    DTIC Science & Technology

    1998-12-01

    Gary Universit6 Blaise Pascal de Clermont-Ferrand. Laboratoire d’Electrotechnique de Montluqon. Av. A. Briand 03100 MONTLUQON. FRANCE S. Servant...CNRS Universitd Blaise Pascal , 24 avenue des landais, 63177 AUBIERE Cedex France. INTRODUCTION Carbon dioxide is one of the most abundant chemical found...Baclawski A. II-110 Birau M. 111-46 Andreazza P. IV-252 Badie J.M. IV-192 Bisch C. IV-192 Andreazza-Vignolles C. IV-252 Bagatin M. 11-262 Blaise G. 111-86

  18. Physicsdesign point for a 1MW fusion neutron source

    NASA Astrophysics Data System (ADS)

    Woodruff, Simon; Melnik, Paul; Sieck, Paul; Stuber, James; Romero-Talamas, Carlos; O'Bryan, John; Miller, Ronald

    2016-10-01

    We are developing a design point for a spheromak experiment heated by adiabatic compression for use as a compact neutron source. We utilize the CORSICA and NIMROD MHD codes as well as analytic modeling to assess a concept with target parameters R0 =0.5m, Rf =0.17m, T0 =1keV, Tf =8keV, n0 =2e20m-3 and nf = 5e21m-3, with radial convergence of C =R0/Rf =3. We present results from CORSICA showing the placement of coils and passive structure to ensure stability during compression. We specify target parameters for the compression in terms of plasma beta, formation efficiency and energy confinement. We present results simulations of magnetic compression using the NIMROD code to examine the role of rotation on the stability and confinement of the spheromak as it is compressed. Supported by DARPA Grant N66001-14-1-4044 and IAEA CRP on Compact Fusion Neutron Sources.

  19. Accelerators for heavy ion fusion

    SciTech Connect

    Bangerter, R.O.

    1985-10-01

    Large fusion devices will almost certainly produce net energy. However, a successful commercial fusion energy system must also satisfy important engineering and economic constraints. Inertial confinement fusion power plants driven by multi-stage, heavy-ion accelerators appear capable of meeting these constraints. The reasons behind this promising outlook for heavy-ion fusion are given in this report. This report is based on the transcript of a talk presented at the Symposium on Lasers and Particle Beams for Fusion and Strategic Defense at the University of Rochester on April 17-19, 1985.

  20. Surgical fusion in childhood spondylolisthesis.

    PubMed

    Stanton, R P; Meehan, P; Lovell, W W

    1985-01-01

    Twenty cases of surgical fusion for spondylolisthesis were reviewed at the Scottish Rite Hospital (Atlanta, GA, U.S.A.) to determine whether a procedure other than a simple posterolateral fusion is necessary for most patients. The patients were treated postoperatively with pantaloon spica cast immobilization. The fusion rate was high (90%), and patient satisfaction was high. One patient developed neurologic loss postoperatively. Two patients' slips progressed greater than 10% before solid fusion occurred. Thus, bilateral posterolateral fusion, followed by pantaloon spica cast immobilization, is effective for patients with symptomatic spondylolisthesis or asymptomatic children with grade 3 or greater slips. Reduction was not performed in this series.

  1. Post-upgrade testing on a radiotherapy oncology information system with an embedded record and verify system following the IAEA Human Health Report No. 7 recommendations.

    PubMed

    Nyathi, Thulani; Colyer, Christopher; Bhardwaj, Anup Kumar; Rijken, James; Morton, Jason

    2016-06-01

    Record and verify (R&V) systems have proven that their application in radiotherapy clinics leads to a significant reduction in mis-treatments of patients. The purpose of this technical note is to share our experience of acceptance testing, commissioning and setting up a quality assurance programme for the MOSAIQ® oncology information system and R&V system after upgrading from software version 2.41 to 2.6 in a multi-vendor, multi-site environment. Testing was guided primarily by the IAEA Human Report No. 7 recommendations, but complemented by other departmental workflow specific tests. To the best of our knowledge, this is the first time successful implementation of the IAEA Human Health Report Series No. 7 recommendations have been reported in the literature.

  2. Participation in IAEA-TEL-201304/28 ALMERA Proficiency Test Exercise on Determination of Anthropogenic Radionuclides in Water and Flour Samples.

    PubMed

    Visetpotjanakit, S; Kaewpaluek, S; Udomsomporn, S

    2016-03-01

    The Office of Atoms for Peace (OAP) participated in the IAEA-TEL-201304/28 ALMERA Proficiency Test Exercise, "Determination of Anthropogenic Radionuclides in Water and Flour Samples," organized by the ALMERA network. There were three test samples sent together with one known activity sample for quality control purpose. Two of the test samples were spiked water: one contained (134)Cs and (137)Cs and the other contained (90)Sr, (60)Co, (152)Eu and (241)Am. The third sample was wheat flour spiked with (134)Cs and (137)Cs. OAP submitted all results to IAEA after determining (134)Cs, (137)Cs, (60)Co, (152)Eu and (241)Am activities by direct gamma-ray counting and (90)Sr by chemical separation and Cerenkov measurement. Our results with critical comments and statistical analysis are described in this paper.

  3. Fission-suppressed fusion breeder on the thorium cycle and nonproliferation

    SciTech Connect

    Moir, R. W.

    2012-06-19

    Fusion reactors could be designed to breed fissile material while suppressing fissioning thereby enhancing safety. The produced fuel could be used to startup and makeup fuel for fission reactors. Each fusion reaction can produce typically 0.6 fissile atoms and release about 1.6 times the 14 MeV neutron's energy in the blanket in the fission-suppressed design. This production rate is 2660 kg/1000 MW of fusion power for a year. The revenues would be doubled from such a plant by selling fuel at a price of 60/g and electricity at $0.05/kWh for Q=P{sub fusion}/P{sub input}=4. Fusion reactors could be designed to destroy fission wastes by transmutation and fissioning but this is not a natural use of fusion whereas it is a designed use of fission reactors. Fusion could supply makeup fuel to fission reactors that were dedicated to fissioning wastes with some of their neutrons. The design for safety and heat removal and other items is already accomplished with fission reactors. Whereas fusion reactors have geometry that compromises safety with a complex and thin wall separating the fusion zone from the blanket zone where wastes could be destroyed. Nonproliferation can be enhanced by mixing {sup 233}U with {sup 238}U. Also nonproliferation is enhanced in typical fission-suppressed designs by generating up to 0.05 {sup 232}U atoms for each {sup 233}U atom produced from thorium, about twice the IAEA standards of 'reduced protection' or 'self protection.' With 2.4%{sup 232}U, high explosive material is predicted to degrade owing to ionizing radiation after a little over 1/2 year and the heat rate is 77 W just after separation and climbs to over 600 W ten years later. The fissile material can be used to fuel most any fission reactor but is especially appropriate for molten salt reactors (MSR) also called liquid fluoride thorium reactors (LFTR) because of the molten fuel does not need hands on fabrication and handling.

  4. The path to fusion power.

    PubMed

    Llewellyn Smith, Chris; Ward, David

    2007-04-15

    Fusion is potentially an environmentally responsible and intrinsically safe source of essentially limitless power. It should be possible to build viable fusion power stations, and it looks as if the cost of fusion power will be reasonable. But time is needed to further develop the technology and to test in power station conditions the materials that would be used in their construction. Assuming no major adverse surprises, an orderly fusion development programme could lead to a prototype fusion power station putting electricity into the grid within 30 years, with commercial fusion power following some 10 or more years later. In the second half of the century, fusion could therefore be an important part of the portfolio of measures that are needed to cope with rising demand for energy in an environmentally responsible manner. In this paper, we describe the basics of fusion, its potential attractions, the status of fusion R&D, the remaining challenges and how they will be tackled at the International Tokamak Experimental Reactor and the proposed International Fusion Materials Irradiation Facility, and the timetable for the subsequent commercialization of fusion power.

  5. Implementation of k0-INAA standardisation at ITU TRIGA Mark II research reactor, Turkey based on k0-IAEA software

    NASA Astrophysics Data System (ADS)

    Esen, Ayse Nur; Haciyakupoglu, Sevilay

    2016-02-01

    The purpose of this study is to test the applicability of k0-INAA method at the Istanbul Technical University TRIGA Mark II research reactor. The neutron spectrum parameters such as epithermal neutron flux distribution parameter (α), thermal to epithermal neutron flux ratio (f) and thermal neutron flux (φth) were determined at the central irradiation channel of the ITU TRIGA Mark II research reactor using bare triple-monitor method. HPGe detector calibrations and calculations were carried out by k0-IAEA software. The α, f and φth values were calculated to be -0.009, 15.4 and 7.92·1012 cm-2 s-1, respectively. NIST SRM 1633b coal fly ash and intercomparison samples consisting of clay and sandy soil samples were used to evaluate the validity of the method. For selected elements, the statistical evaluation of the analysis results was carried out by z-score test. A good agreement between certified/reported and experimental values was obtained.

  6. Comparisons of the Codes of Practice IAEA TRS 277 and TRS 398: High Energy Photons and Electron Beams

    NASA Astrophysics Data System (ADS)

    Gutiérrez-Castillo, J. G.; Torres-Calderón, A.; Fragoso-Valdéz, F. R.; Álvarez-Romero, J. T.

    2004-09-01

    This work presents the calibration for: 6, 8, 10, 12, 14, 15 and 18 MeV electron beams, also to 6 and 15 MV photons beams. Beams that are generated by an accelerator Elekta Linac SL 18. The calibration is performed in terms of absorbed dose to water Dw. It is determined by two different protocols: the code of practice of the International Atomic Energy Agency (IAEA) TRS 277 for ionization chambers calibrated on air kerma NK, and the code of practice TRS 398 for ionization chambers calibrated on absorbed dose to water ND,W. Two independent dosimeters were used with two ionization chambers each one, respectively. The first one, a dosimeter PTW model UNIDOS with Markus type chamber (plane parallel) for electrons, and Farmer type chamber (cylindrical) for photons, both chambers calibrated in NK. The second dosimeter Scanditronix model DOSE 1 with plane parallel chamber (electrons) and cylindrical chamber (photons), both chambers calibrated in terms of ND,W. In the case of photon beams, the TPR was measured for 6 and 15 MV, also the profiles were determined in order to verify the flatness and symmetry of the beam: ±3%. The quality for electrons beams were estimated by means of the Dmax, R80, R50 and Rp. The results obtained for the absorbed dose quotients DW,Q(dmax)277398 are: Electrons, 0.976⩽ DW,Q(dmax)277398⩽ 1.001; Photons: 1.001 ⩽ DW,Q(dmax)277398 ⩽ 1.003.

  7. Treatment of Irradiated Graphite to meet Acceptance Criteria for Waste Disposal: A New IAEA Collaborative Research Program - 12443

    SciTech Connect

    Wickham, A.J.; Drace, Z.

    2012-07-01

    World-wide, more than 250,000 tonnes of irradiated graphite have arisen through commercial nuclear-power operations and from military production reactors. Whilst most nations responsible for the generation of this material have in mind repository disposal alongside other radwaste, the lack of progress in this regard has led in some cases to difficulties where, for example, the site of an existing graphite-moderated reactor is required for re-utilisation. In any case, graphite as a radwaste stream has unique chemical and physical properties which may lend itself to more radical and innovative treatment and disposal options, including the recovery of useful isotopes and also recycling within the nuclear industry. Such aspects are important in making the case for future graphite-moderated reactor options (for example, High-Temperature Reactors planned for simultaneous power production and high-grade heat sources for such applications as hydrogen production for road fuel). A number of initiatives have taken place since the mid 1990s aimed at exploring such alternative strategies and, more recently, improving technology offers new options at all stages of the dismantling and disposal process. A new IAEA Collaborative Research Program aims to build upon the work already done and the knowledge achieved, in order to identify the risks and uncertainties associated with alternative options for graphite disposal, along with cost comparisons, thus enabling individual Member States to have the best-available information at their disposal to configure their own programs. (authors)

  8. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Thailand.

    PubMed

    Vajaradul, Yongyudh; Morales Pedraza, Jorge

    2009-05-01

    Tissue banking started in Thailand in 1979. Five years after this, the Bangkok Biomaterial Centre (BBC) was established in the Faculty of Medicine, Siriraj Hospital, with the support of the IAEA program. The objective of the Centre was to provide sterile bones and tissues for clinical use. Through the passage of time, the Bangkok Biomaterial Centre has gained confidence from the end user and by 2007 has processed 33,872 allografts from 491 deceased donors and 4,035 live donors were used in medical treatment in 3,596 patients in more than 79 different hospitals. More than 305 surgeons from Thailand used the tissue produced in the BBC. At the beginning of its work the BBC concentrate its activities on the production of the following tissues: freeze dried bone, freeze dried dura mater and freeze dried fascia lata. All of these tissues were sterilised using ethylene oxide gas until the end of year 1984. Since 1985 the BBC sterilise tissue using ionising radiation. The BBC is now producing deep-frozen; bone tendon, cartilage, trachea and soft tissue; freeze-dried; bone, fascia lata, dura mater, amniotic membrane, bone hydroxyapatite, bone tablet and fresh preserved amniotic membrane.

  9. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Cuba.

    PubMed

    Morales Pedraza, Jorge; Sánchez Noda, Eddy O; Rodríguez Cardona, Ramón Lorenzo; Otero, Isabel

    2009-05-01

    The first multi-tissue bank was founded at Havana in 1958. At that time, freeze-drying was used at the bank as a method of preserving, as well as Cobalt 60 irradiation to sterilise bone tissue, heart valves and others. The impact of the IAEA program in tissue banking activities in Cuba can be summarised as follows: (a) Increase in the production of sterilised tissues using ionising radiation (bone, pig skin and amnion) for medical treatment in the tissue bank of the Hospital Frank Pais; (b) increase of the quality of the productions of bone tissues, pig skin and amnion; (c) reduction in the import of tissues by increasing the local production of tissues; (d) sustainability in the number of donors through the implementation of a public and professional awareness campaign; (e) training of six persons in the Regional Training Centre of Buenos Aires; (f) qualification of one person in the administration of a tissue bank and in the implementation of a Quality System. The amount of tissues produced and sterilised using the ionising radiation techniques in the established banks was 25,510 units. The amount of patients treated with sterilised tissues produced by the established banks was 2,448.

  10. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Asia and the Pacific and the Latin American regions.

    PubMed

    Morales Pedraza, Jorge; Phillips, Glyn O

    2009-05-01

    The technical assistance program of the International Atomic Energy Agency (IAEA) for its member states in the framework of the implementation of its program on radiation and tissue banking focuses on ensuring the availability of quality radiation-sterilised tissue grafts. The IAEA also helps its member states to develop quality control capabilities in order to ensure the safe use of the processed tissues in certain medical treatments. The majority of developing countries does not have such capacity, and must import expensive sterilised tissues from developed countries. The IAEA's core contribution to its program on radiation and tissue banking in Asia and the Pacific and the Latin American regions is a technology for sterilisation by gamma radiation and a training program for tissue bank operators and medical personnel. The Agency develops capabilities for radiation sterilisation of tissue grafts, both for reducing the pre-processing bacterial load, and as a terminal sterilisation process. Sterilising tissue grafts offers a clear advantage in terms of safety. Moreover, compared to alternative sterilisation methods, radiation sterilisation is considered particularly safe in relation to environmental concerns, and the deposition of harmful residuals in the tissue, which occurs for example in the use of chemical such as ethylene oxide gas. Radiation sterilisation, thus, has become the method of choice for an increasing number of tissue banks. Radiation sterilisation of tissue grafts is a critical component in the chain connecting donors to recipients of high quality tissue grafts. Due to this fact, the IAEA has evolved as the only organisation in the UN System with expertise related to tissue banking.

  11. The Need for Fusion Propulsion

    NASA Technical Reports Server (NTRS)

    Cassibry, Jason

    2005-01-01

    Fusion propulsion is inevitable if the human race remains dedicated to exploration of the solar system. There are fundamental reasons why fusion surpasses more traditional approaches to routine crewed missions to Mars, crewed missions to the outer planets, and deep space high speed robotic missions, assuming that reduced trip times, increased payloads, and higher available power are desired. A recent series of informal discussions were held among members from government, academia, and industry concerning fusion propulsion. We compiled a sufficient set of arguments for utilizing fusion in space. If the U.S. is to lead the effort and produce a working system in a reasonable amount of time, NASA must take the initiative, relying on, but not waiting for, DOE guidance. In this talk those arguments for fusion propulsion are presented, along with fusion enabled mission examples, fusion technology trade space, and a proposed outline for future efforts.

  12. Program of technical assistance to the Organization for the Prohibition of Chemical Weapons - lessons learned from the U.S. program of technical assistance to IAEA safeguards. Final report

    SciTech Connect

    1995-06-01

    The Defense Nuclear Agency is sponsoring a technical study of the requirements of a vehicle to meet the OPCW`s future needs for enhanced chemical weapons verification capabilities. This report provides information about the proven mechanisms by which the U.S. provided both short- and long-term assistance to the IAEA to enhance its verification capabilities. Much of the technical assistance has generic application to international organizations verifying compliance with disarmament treaties or conventions. In addition, some of the equipment developed by the U.S. under the existing arrangements can be applied in the verification of other disarmament treaties or conventions. U.S. technical assistance to IAEA safeguards outside of the IAEA`s regular budget proved to be necessary. The U.S. technical assistance was successful in improving the effectiveness of IAEA safeguards for its most urgent responsibilities and in providing the technical elements for increased IAEA {open_quotes}readiness{close_quotes} for the postponed responsibilities deemed important for U.S. policy objectives. Much of the technical assistance was directed to generic subjects and helped to achieve a system of international verification. It is expected that the capabilities of the Organization for the Prohibition of Chemical Weapons (OPCW) to verify a state`s compliance with the {open_quotes}Chemical Weapons Convention{close_quotes} will require improvements. This report presents 18 important lessons learned from the experience of the IAEA and the U.S. Program of Technical Assistance to IAEA Safeguards (POTAS), organized into three tiers. Each lesson is presented in the report in the context of the difficulty, need and history in which the lesson was learned. Only the most important points are recapitulated in this executive summary.

  13. Fusion Data Grid Service

    NASA Astrophysics Data System (ADS)

    Shasharina, Svetlana; Wang, Nanbor

    2004-11-01

    Simulations and experiments in the fusion and plasma physics community generate large datasets at remote sites. Visualization and analysis of these datasets are difficult because of the incompatibility among the various data formats adopted by simulation, experiments, and analysis tools, and the large sizes of analyzed data. Grids and Web Services technologies are capable of providing solutions for such heterogeneous settings, but need to be customized to the field-specific needs and merged with distributed technologies currently used by the community. This paper describes how we are addressing these issues in the Fusion Grid Service under development. We also present performance results of relevant data transfer mechanisms including binary SOAP, DIME, GridFTP and MDSplus and CORBA. We will describe the status of data converters (between HDF5 and MDSplus data types), developed in collaboration with MIT (J. Stillerman). Finally, we will analyze bottlenecks of MDSplus data transfer mechanism (work performed in collaboration with General Atomics (D. Schissel and M. Qian).

  14. Experiments in cold fusion

    SciTech Connect

    Palmer, E.P.

    1986-03-28

    The work of Steve Jones and others in muon-catalyzed cold fusion of deuterium and hydrogen suggests the possibility of such fusion catalyzed by ions, or combinations of atoms, or more-or-less free electrons in solid and liquid materials. A hint that this might occur naturally comes from the heat generated in volcanic action in subduction zones on the earth. It is questionable whether the potential energy of material raised to the height of a midocean ridge and falling to the depth of an ocean trench can produce the geothermal effects seen in the volcanoes of subduction zones. If the ridge, the trench, the plates, and the asthenosphere are merely visible effects of deeper density-gradient driven circulations, it is still uncertain that observed energy-concentration effects fit the models.

  15. Fusion pumped laser

    DOEpatents

    Pappas, D.S.

    1987-07-31

    The apparatus of this invention may comprise a system for generating laser radiation from a high-energy neutron source. The neutron source is a tokamak fusion reactor generating a long pulse of high-energy neutrons and having a temperature and magnetic field effective to generate a neutron flux of at least 10/sup 15/ neutrons/cm/sup 2//center dot/s. Conversion means are provided adjacent the fusion reactor at a location operable for converting the high-energy neutrons to an energy source with an intensity and energy effective to excite a preselected lasing medium. A lasing medium is spaced about and responsive to the energy source to generate a population inversion effective to support laser oscillations for generating output radiation. 2 figs., 2 tabs.

  16. Unconventional approaches to fusion

    SciTech Connect

    Brunelli, B.; Leotta, G.G.

    1982-01-01

    This volume is dedicated to unconventional approaches to fusionthose thermonuclear reactors that, in comparison with Tokamak and other main lines, have received little attention in the worldwide scientific community. Many of the approaches considered are still in the embryonic stages. The authors-an international group of active nuclear scientists and engineers-focus on the parameters achieved in the use of these reactors and on the meaning of the most recent physical studies and their implications for the future. They also compare these approaches with conventional ones, the Tokamak in particular, stressing the non-plasma-physics requirements of fusion reactors. Unconventional compact toroids, linear systems, and multipoles are considered, as are the ''almost conventional'' fusion machines: stellarators, mirrors, reversed-field pinches, and EBT.

  17. Maximum Likelihood Fusion Model

    DTIC Science & Technology

    2014-08-09

    data fusion, hypothesis testing,maximum likelihood estimation, mobile robot navigation REPORT DOCUMENTATION PAGE 11. SPONSOR/MONITOR’S REPORT...61 vi 9 Bibliography 62 vii 10 LIST OF FIGURES 1.1 Illustration of mobile robotic agents. Land rovers such as (left) Pioneer robots ...simultaneous localization and mapping 1 15 Figure 1.1: Illustration of mobile robotic agents. Land rovers such as (left) Pioneer robots , (center) Segways

  18. Fusion development and technology

    SciTech Connect

    Montgomery, D.B.

    1992-01-01

    This report discusses the following: superconducting magnet technology; high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies--aries; ITER physics: alpha physics and alcator R D for ITER; lower hybrid current drive and heating in the ITER device; ITER superconducting PF scenario and magnet analysis; ITER systems studies; and safety, environmental and economic factors in fusion development.

  19. (Fusion energy research)

    SciTech Connect

    Phillips, C.A.

    1988-01-01

    This report discusses the following topics: principal parameters achieved in experimental devices (FY88); tokamak fusion test reactor; Princeton beta Experiment-Modification; S-1 Spheromak; current drive experiment; x-ray laser studies; spacecraft glow experiment; plasma deposition and etching of thin films; theoretical plasma; tokamak modeling; compact ignition tokamak; international thermonuclear experimental reactor; Engineering Department; Project Planning and Safety Office; quality assurance and reliability; and technology transfer.

  20. Modular Aneutronic Fusion Engine

    SciTech Connect

    Gary Pajer, Yosef Razin, Michael Paluszek, A.H. Glasser and Samuel Cohen

    2012-05-11

    NASA's JUNO mission will arrive at Jupiter in July 2016, after nearly five years in space. Since operational costs tend to rise with mission time, minimizing such times becomes a top priority. We present the conceptual design for a 10MW aneutronic fusion engine with high exhaust velocities that would reduce transit time for a Jupiter mission to eighteen months and enable more challenging exploration missions in the solar system and beyond. __________________________________________________

  1. Cold fusion studies

    NASA Astrophysics Data System (ADS)

    Hembree, D. M.; Burchfield, L. A.; Fuller, E. L., Jr.; Perey, F. G.; Mamantov, G.

    1990-06-01

    A series of experiments designed to detect the by-products expected from deuterium fusion occurring in the palladium and titanium cathodes of heavy water, D2O, electrolysis cells is reported. The primary purpose of this account is to outline the integrated experimental design developed to test the cold fusion hypothesis and to report preliminary results that support continuing the investigation. Apparent positive indicators of deuterium fusion were observed, but could not be repeated or proved to originate from the electrochemical cells. In one instance, two large increases in the neutron count rate, the largest of which exceeded the background by 27 standard deviations, were observed. In a separate experiment, one of the calorimetry cells appeared to be producing approximately 18 percent more power that the input value, but thermistor failure prevented an accurate recording of the event as a function of time. In general, the tritium levels in most cells followed the slow enrichment expected from the electrolysis of D2O containing a small amount of tritium. However, after 576 hours of electrolysis, one cell developed a tritium concentration approximately seven times greater than expected level.

  2. Stabilized Spheromak Fusion Reactors

    SciTech Connect

    Fowler, T

    2007-04-03

    The U.S. fusion energy program is focused on research with the potential for studying plasmas at thermonuclear temperatures, currently epitomized by the tokamak-based International Thermonuclear Experimental Reactor (ITER) but also continuing exploratory work on other plasma confinement concepts. Among the latter is the spheromak pursued on the SSPX facility at LLNL. Experiments in SSPX using electrostatic current drive by coaxial guns have now demonstrated stable spheromaks with good heat confinement, if the plasma is maintained near a Taylor state, but the anticipated high current amplification by gun injection has not yet been achieved. In future experiments and reactors, creating and maintaining a stable spheromak configuration at high magnetic field strength may require auxiliary current drive using neutral beams or RF power. Here we show that neutral beam current drive soon to be explored on SSPX could yield a compact spheromak reactor with current drive efficiency comparable to that of steady state tokamaks. Thus, while more will be learned about electrostatic current drive in coming months, results already achieved in SSPX could point to a productive parallel development path pursuing auxiliary current drive, consistent with plans to install neutral beams on SSPX in the near future. Among possible outcomes, spheromak research could also yield pulsed fusion reactors at lower capital cost than any fusion concept yet proposed.

  3. Fission-suppressed fusion breeder on the thorium cycle and nonproliferation

    NASA Astrophysics Data System (ADS)

    Moir, R. W.

    2012-06-01

    Fusion reactors could be designed to breed fissile material while suppressing fissioning thereby enhancing safety. The produced fuel could be used to startup and makeup fuel for fission reactors. Each fusion reaction can produce typically 0.6 fissile atoms and release about 1.6 times the 14 MeV neutron's energy in the blanket in the fission-suppressed design. This production rate is 2660 kg/1000 MW of fusion power for a year. The revenues would be doubled from such a plant by selling fuel at a price of 60/g and electricity at 0.05/kWh for Q=Pfusion/Pinput=4. Fusion reactors could be designed to destroy fission wastes by transmutation and fissioning but this is not a natural use of fusion whereas it is a designed use of fission reactors. Fusion could supply makeup fuel to fission reactors that were dedicated to fissioning wastes with some of their neutrons. The design for safety and heat removal and other items is already accomplished with fission reactors. Whereas fusion reactors have geometry that compromises safety with a complex and thin wall separating the fusion zone from the blanket zone where wastes could be destroyed. Nonproliferation can be enhanced by mixing 233U with 238U. Also nonproliferation is enhanced in typical fission-suppressed designs by generating up to 0.05 232U atoms for each 233U atom produced from thorium, about twice the IAEA standards of "reduced protection" or "self protection." With 2.4% 232U, high explosive material is predicted to degrade owing to ionizing radiation after a little over 1/2 year and the heat rate is 77 W just after separation and climbs to over 600 W ten years later. The fissile material can be used to fuel most any fission reactor but is especially appropriate for molten salt reactors (MSR) also called liquid fluoride thorium reactors (LFTR) because of the molten fuel does not need hands on fabrication and handling.

  4. [Image fusion in medical radiology].

    PubMed

    Burger, C

    1996-07-20

    Image fusion supports the correlation between images of two or more studies of the same organ. First, the effect of differing geometries during image acquisitions, such as a head tilt, is compensated for. As a consequence, congruent images can easily be obtained. Instead of merely putting them side by side in a static manner and burdening the radiologist with the whole correlation task, image fusion supports him with interactive visualization techniques. This is especially worthwhile for small lesions as they can be more precisely located. Image fusion is feasible today. Easy and robust techniques are readily available, and furthermore DICOM, a rapidly evolving data exchange standard, diminishes the once severe compatibility problems for image data originating from systems of different manufacturers. However, the current solutions for image fusion are not yet established enough for a high throughput of fusion studies. Thus, for the time being image fusion is most appropriately confined to clinical research studies.

  5. Comparison of Homogeneous and Heterogeneous CFD Fuel Models for Phase I of the IAEA CRP on HTR Uncertainties Benchmark

    SciTech Connect

    Gerhard Strydom; Su-Jong Yoon

    2014-04-01

    Computational Fluid Dynamics (CFD) evaluation of homogeneous and heterogeneous fuel models was performed as part of the Phase I calculations of the International Atomic Energy Agency (IAEA) Coordinate Research Program (CRP) on High Temperature Reactor (HTR) Uncertainties in Modeling (UAM). This study was focused on the nominal localized stand-alone fuel thermal response, as defined in Ex. I-3 and I-4 of the HTR UAM. The aim of the stand-alone thermal unit-cell simulation is to isolate the effect of material and boundary input uncertainties on a very simplified problem, before propagation of these uncertainties are performed in subsequent coupled neutronics/thermal fluids phases on the benchmark. In many of the previous studies for high temperature gas cooled reactors, the volume-averaged homogeneous mixture model of a single fuel compact has been applied. In the homogeneous model, the Tristructural Isotropic (TRISO) fuel particles in the fuel compact were not modeled directly and an effective thermal conductivity was employed for the thermo-physical properties of the fuel compact. On the contrary, in the heterogeneous model, the uranium carbide (UCO), inner and outer pyrolytic carbon (IPyC/OPyC) and silicon carbide (SiC) layers of the TRISO fuel particles are explicitly modeled. The fuel compact is modeled as a heterogeneous mixture of TRISO fuel kernels embedded in H-451 matrix graphite. In this study, a steady-state and transient CFD simulations were performed with both homogeneous and heterogeneous models to compare the thermal characteristics. The nominal values of the input parameters are used for this CFD analysis. In a future study, the effects of input uncertainties in the material properties and boundary parameters will be investigated and reported.

  6. High Level Information Fusion (HLIF) with nested fusion loops

    NASA Astrophysics Data System (ADS)

    Woodley, Robert; Gosnell, Michael; Fischer, Amber

    2013-05-01

    Situation modeling and threat prediction require higher levels of data fusion in order to provide actionable information. Beyond the sensor data and sources the analyst has access to, the use of out-sourced and re-sourced data is becoming common. Through the years, some common frameworks have emerged for dealing with information fusion—perhaps the most ubiquitous being the JDL Data Fusion Group and their initial 4-level data fusion model. Since these initial developments, numerous models of information fusion have emerged, hoping to better capture the human-centric process of data analyses within a machine-centric framework. 21st Century Systems, Inc. has developed Fusion with Uncertainty Reasoning using Nested Assessment Characterizer Elements (FURNACE) to address challenges of high level information fusion and handle bias, ambiguity, and uncertainty (BAU) for Situation Modeling, Threat Modeling, and Threat Prediction. It combines JDL fusion levels with nested fusion loops and state-of-the-art data reasoning. Initial research has shown that FURNACE is able to reduce BAU and improve the fusion process by allowing high level information fusion (HLIF) to affect lower levels without the double counting of information or other biasing issues. The initial FURNACE project was focused on the underlying algorithms to produce a fusion system able to handle BAU and repurposed data in a cohesive manner. FURNACE supports analyst's efforts to develop situation models, threat models, and threat predictions to increase situational awareness of the battlespace. FURNACE will not only revolutionize the military intelligence realm, but also benefit the larger homeland defense, law enforcement, and business intelligence markets.

  7. Network-centric data fusion

    NASA Astrophysics Data System (ADS)

    Nicholson, David; Lloyd, C. M.; Collins, Peter R. C.

    2002-08-01

    The performance of three distributed sensor fusion network architectures is investigated: a fully-connected and a partially-connected measurement fusion system and a partially-connected track fusion system. The investigation employs an advanced military scenario generator, FLAMES, which was customised for exercising a range of distributed data fusion experiments. Specifically, it includes a representative model of the delays in a communication system (such as JTIDS or Link 16). Here the delays were used to modify communication bandwidth and to evaluate how this affected the performance of the fusion architectures/algorithms. Under certain specific scenario conditions, it was found that decentralised measurement fusion system was severely affected by reduced bandwidth. This is because each node loads its communication buffer with every measurement and consequently some measurements are never transmitted. The decentralised track fusion system exhibits improved performance because it lumps measurements into tracks and thereby it makes much more effective use of the bandwidth. Moreover, it was found that the performance of the partially connected decentralised track fusion system was very close to the optimal performance achieved by the fully-connected decentralised measurement fusion system.

  8. OCULUS Sea Track Fusion Service

    NASA Astrophysics Data System (ADS)

    Panagiotou, Stylianos C.; Rizogiannis, Constantinos; Katsoulis, Stavros; Lampropoulos, Vassilis; Kanellopoulos, Sotirios; Thomopoulos, Stelios C. A.

    2015-06-01

    Oculus Sea is a complete solution regarding maritime surveillance and communications at Local as well as Central Command and Control level. It includes a robust and independent track fusion service whose main functions include: 1) Interaction with the User to suggest the fusion of two or more tracks, confirm Track ID and Vessel Metadata creation for the fused track, and suggest de-association of two tracks 2) Fusion of same vessel tracks arriving simultaneously from multiple radar sensors featuring track Association, track Fusion of associated tracks to produce a more accurate track, and Multiple tracking filters and fusion algorithms 3) Unique Track ID Generator for each fused track 4) Track Dissemination Service. Oculus Sea Track Fusion Service adopts a system architecture where each sensor is associated with a Kalman estimator/tracker that obtains an estimate of the state vector and its respective error covariance matrix. Finally, at the fusion center, association and track state estimation fusion are carried out. The expected benefits of this system include multi-sensor information fusion, enhanced spatial resolution, and improved target detection.

  9. Economic potential of inertial fusion

    SciTech Connect

    Nuckolls, J.H.

    1984-04-01

    Beyond the achievement of scientific feasibility, the key question for fusion energy is: does it have the economic potential to be significantly cheaper than fission and coal energy. If fusion has this high economic potential then there are compelling commercial and geopolitical incentives to accelerate the pace of the fusion program in the near term, and to install a global fusion energy system in the long term. Without this high economic potential, fusion's success depends on the failure of all alternatives, and there is no real incentive to accelerate the program. If my conjectures on the economic potential of inertial fusion are approximately correct, then inertial fusion energy's ultimate costs may be only half to two-thirds those of advanced fission and coal energy systems. Relative cost escalation is not assumed and could increase this advantage. Both magnetic and inertial approaches to fusion potentially have a two-fold economic advantage which derives from two fundamental properties: negligible fuel costs and high quality energy which makes possible more efficient generation of electricity. The wining approach to fusion may excel in three areas: electrical generating efficiency, minimum material costs, and adaptability to manufacture in automated factories. The winning approach must also rate highly in environmental potential, safety, availability factor, lifetime, small 0 and M costs, and no possibility of utility-disabling accidents.

  10. Cold nuclear fusion

    NASA Astrophysics Data System (ADS)

    Tsyganov, E. N.; Bavizhev, M. D.; Buryakov, M. G.; Dabagov, S. B.; Golovatyuk, V. M.; Lobastov, S. P.

    2015-07-01

    If target deuterium atoms were implanted in a metal crystal in accelerator experiments, a sharp increase in the probability of DD-fusion reaction was clearly observed when compared with the reaction's theoretical value. The electronic screening potential, which for a collision of free deuterium atoms is about 27 eV, reached 300-700 eV in the case of the DD-fusion in metallic crystals. These data leads to the conclusion that a ban must exist for deuterium atoms to be in the ground state 1s in a niche filled with free conduction electrons. At the same time, the state 2p whose energy level is only 10 eV above that of state 1s is allowed in these conditions. With anisotropy of 2p, 3p or above orbitals, their spatial positions are strictly determined in the lattice coordinate system. When filling out the same potential niches with two deuterium atoms in the states 2p, 3p or higher, the nuclei of these atoms can be permanently positioned without creating much Coulomb repulsion at a very short distance from each other. In this case, the transparency of the potential barrier increases dramatically compared to the ground state 1s for these atoms. The probability of the deuterium nuclei penetrating the Coulomb barrier by zero quantum vibration of the DD-system also increases dramatically. The so-called cold nuclear DD-fusion for a number of years was registered in many experiments, however, was still rejected by mainstream science for allegedly having no consistent scientific explanation. Finally, it received the validation. Below, we outline the concept of this explanation and give the necessary calculations. This paper also considers the further destiny of the formed intermediate state of 4He∗.

  11. Physics of Fusion Welding

    NASA Technical Reports Server (NTRS)

    Nunes, A. C., Jr.

    1986-01-01

    Applicabilities and limitations of three techniques analyzed. NASA technical memorandum discusses physics of electron-beam, gas/ tungsten-arc, and laser-beam welding. From comparison of capabilities and limitations of each technique with regard to various welding conditions and materials, possible to develop criteria for selecting best welding technique in specific application. All three techniques classified as fusion welding; small volume of workpiece melted by intense heat source. Heat source moved along seam, leaving in wake solid metal that joins seam edges together.

  12. Cold Fusion Verification.

    DTIC Science & Technology

    1991-03-01

    published work, talking with others in the field, and attending conferences, that CNF probably is chimera and will go the way of N-rays and polywater ...way of N-rays and polywater . To date, no one, including Pons and Fleischmann, has been able to construct a so-called CNF electrochemical cell that...Cold Nuclear Fusion (CNF), as originally reported in 1989. The conclusion is that CNF probably is chimera and will go the way of N-rays and polywater

  13. Fusion reactor pumped laser

    DOEpatents

    Jassby, Daniel L.

    1988-01-01

    A nuclear pumped laser capable of producing long pulses of very high power laser radiation is provided. A toroidal fusion reactor provides energetic neutrons which are slowed down by a moderator. The moderated neutrons are converted to energetic particles capable of pumping a lasing medium. The lasing medium is housed in an annular cell surrounding the reactor. The cell includes an annular reflecting mirror at the bottom and an annular output window at the top. A neutron reflector is disposed around the cell to reflect escaping neutrons back into the cell. The laser radiation from the annular window is focused onto a beam compactor which generates a single coherent output laser beam.

  14. High resolution isotopic analysis of U-bearing particles via fusion of SIMS and EDS images

    SciTech Connect

    Tarolli, Jay G.; Naes, Benjamin E.; Garcia, Benjamin J.; Fischer, Ashley E.; Willingham, David

    2016-01-01

    Image fusion of secondary ion mass spectrometry (SIMS) images and X-ray elemental maps from energy-dispersive spectroscopy (EDS) was performed to facilitate the isolation and re-analysis of isotopically unique U-bearing particles where the highest precision SIMS measurements are required. Image registration, image fusion and particle micromanipulation were performed on a subset of SIMS images obtained from a large area pre-screen of a particle distribution from a sample containing several certified reference materials (CRM) U129A, U015, U150, U500 and U850, as well as a standard reference material (SRM) 8704 (Buffalo River Sediment) to simulate particles collected on swipes during routine inspections of declared uranium enrichment facilities by the International Atomic Energy Agency (IAEA). In total, fourteen particles, ranging in size from 5 – 15 µm, were isolated and re-analyzed by SIMS in multi-collector mode identifying nine particles of CRM U129A, one of U150, one of U500 and three of U850. These identifications were made within a few percent errors from the National Institute of Standards and Technology (NIST) certified atom percent values for 234U, 235U and 238U for the corresponding CRMs. This work represents the first use of image fusion to enhance the accuracy and precision of isotope ratio measurements for isotopically unique U-bearing particles for nuclear safeguards applications. Implementation of image fusion is essential for the identification of particles of interests that fall below the spatial resolution of the SIMS images.

  15. Inertial confinement fusion

    SciTech Connect

    Powers, L.; Condouris, R.; Kotowski, M.; Murphy, P.W.

    1992-01-01

    This issue of the ICF Quarterly contains seven articles that describe recent progress in Lawrence Livermore National Laboratory's ICF program. The Department of Energy recently initiated an effort to design a 1--2 MJ glass laser, the proposed National Ignition Facility (NIF). These articles span various aspects of a program which is aimed at moving forward toward such a facility by continuing to use the Nova laser to gain understanding of NIF-relevant target physics, by developing concepts for an NIF laser driver, and by envisioning a variety of applications for larger ICF facilities. This report discusses research on the following topics: Stimulated Rotational Raman Scattering in Nitrogen; A Maxwell Equation Solver in LASNEX for the Simulation of Moderately Intense Ultrashort Pulse Experiments; Measurements of Radial Heat-Wave Propagation in Laser-Produced Plasmas; Laser-Seeded Modulation Growth on Directly Driven Foils; Stimulated Raman Scattering in Large-Aperture, High-Fluence Frequency-Conversion Crystals; Fission Product Hazard Reduction Using Inertial Fusion Energy; Use of Inertial Confinement Fusion for Nuclear Weapons Effects Simulations.

  16. Helium Find Thaws the Cold Fusion Trail.

    ERIC Educational Resources Information Center

    Pennisi, E.

    1991-01-01

    Reported is a study of cold fusion in which trace amounts of helium, possible evidence of an actual fusion reaction, were found. Research methodology is detailed. The controversy over the validity of experimental results with cold fusion are reviewed. (CW)

  17. Fusion Power measurement at ITER

    SciTech Connect

    Bertalot, L.; Barnsley, R.; Krasilnikov, V.; Stott, P.; Suarez, A.; Vayakis, G.; Walsh, M.

    2015-07-01

    Nuclear fusion research aims to provide energy for the future in a sustainable way and the ITER project scope is to demonstrate the feasibility of nuclear fusion energy. ITER is a nuclear experimental reactor based on a large scale fusion plasma (tokamak type) device generating Deuterium - Tritium (DT) fusion reactions with emission of 14 MeV neutrons producing up to 700 MW fusion power. The measurement of fusion power, i.e. total neutron emissivity, will play an important role for achieving ITER goals, in particular the fusion gain factor Q related to the reactor performance. Particular attention is given also to the development of the neutron calibration strategy whose main scope is to achieve the required accuracy of 10% for the measurement of fusion power. Neutron Flux Monitors located in diagnostic ports and inside the vacuum vessel will measure ITER total neutron emissivity, expected to range from 1014 n/s in Deuterium - Deuterium (DD) plasmas up to almost 10{sup 21} n/s in DT plasmas. The neutron detection systems as well all other ITER diagnostics have to withstand high nuclear radiation and electromagnetic fields as well ultrahigh vacuum and thermal loads. (authors)

  18. Multi-sensor fusion development

    NASA Astrophysics Data System (ADS)

    Bish, Sheldon; Rohrer, Matthew; Scheffel, Peter; Bennett, Kelly

    2016-05-01

    The U.S. Army Research Laboratory (ARL) and McQ Inc. are developing a generic sensor fusion architecture that involves several diverse processes working in combination to create a dynamic task-oriented, real-time informational capability. Processes include sensor data collection, persistent and observational data storage, and multimodal and multisensor fusion that includes the flexibility to modify the fusion program rules for each mission. Such a fusion engine lends itself to a diverse set of sensing applications and architectures while using open-source software technologies. In this paper, we describe a fusion engine architecture that combines multimodal and multi-sensor fusion within an Open Standard for Unattended Sensors (OSUS) framework. The modular, plug-and-play architecture of OSUS allows future fusion plugin methodologies to have seamless integration into the fusion architecture at the conceptual and implementation level. Although beyond the scope of this paper, this architecture allows for data and information manipulation and filtering for an array of applications.

  19. Cellulose binding domain fusion proteins

    SciTech Connect

    Shoseyov, Oded; Shpiegl, Itai; Goldstein, Marc A.; Doi, Roy H.

    1998-01-01

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production thereof. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques.

  20. Cold fusion; Myth versus reality

    SciTech Connect

    Rabinowitz, M. )

    1990-01-01

    Experiments indicate that several different nuclear reactions are taking place. Some of the experiments point to D-D fusion with a cominant tritium channel as one of the reactions. The article notes a similarity between Prometheus and the discoveries of cold fusion.

  1. Fusion Policy Advisory Committee (FPAC)

    SciTech Connect

    Not Available

    1990-09-01

    This document is the final report of the Fusion Policy Advisory Committee. The report conveys the Committee's views on the matters specified by the Secretary in his charge and subsequent letters to the Committee, and also satisfies the provisions of Section 7 of the Magnetic Fusion Energy Engineering Act of 1980, Public Law 96-386, which require a triennial review of the conduct of the national Magnetic Fusion Energy program. Three sub-Committee's were established to address the large number of topics associated with fusion research and development. One considered magnetic fusion energy, a second considered inertial fusion energy, and the third considered issues common to both. For many reasons, the promise of nuclear fusion as a safe, environmentally benign, and affordable source of energy is bright. At the present state of knowledge, however, it is uncertain that this promise will become reality. Only a vigorous, well planned and well executed program of research and development will yield the needed information. The Committee recommends that the US commit to a plan that will resolve this critically important issue. It also outlines the first steps in a development process that will lead to a fusion Demonstration Power Plant by 2025. The recommended program is aggressive, but we believe the goal is reasonable and attainable. International collaboration at a significant level is an important element in the plan.

  2. Cold Fusion, A Journalistic Investigation

    NASA Astrophysics Data System (ADS)

    Krivit, Steven B.

    2005-03-01

    Author of the recent book, The Rebirth of Cold Fusion, and founder of New Energy Times, Steven B. Krivit presents a summary of cold fusion's, past, present and possible future. This talk will briefly review five highlights of the recent New Energy Times investigation into cold fusion research:1. Analysis of early studies that supposedly disproved cold fusion.2. Key early corroborations that supported the claims of Fleischmann and Pons.3. The evolving understanding of cold fusion reaction paths and by-products.4. A look at volumetric power density.5. Brief comparison of the progress in hot fusion research as compared to cold fusion research.New Energy Times, founded in 2000, is an independent communications company which currently specializes in reporting on cold fusion researchootnotetextReferences and copies of the presentation are available at www.newenergytimes.com/reports/aps2005.htmhttp://www.newenergytimes.com/reports/aps2005.htm. It has no affiliations with any organization, entity or party which invests in these technologies, nor any individual researcher or research facility.

  3. Cellulose binding domain fusion proteins

    DOEpatents

    Shoseyov, O.; Yosef, K.; Shpiegl, I.; Goldstein, M.A.; Doi, R.H.

    1998-02-17

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  4. Membrane fusion during poxvirus entry.

    PubMed

    Moss, Bernard

    2016-12-01

    Poxviruses comprise a large family of enveloped DNA viruses that infect vertebrates and invertebrates. Poxviruses, unlike most DNA viruses, replicate in the cytoplasm and encode enzymes and other proteins that enable entry, gene expression, genome replication, virion assembly and resistance to host defenses. Entry of vaccinia virus, the prototype member of the family, can occur at the plasma membrane or following endocytosis. Whereas many viruses encode one or two proteins for attachment and membrane fusion, vaccinia virus encodes four proteins for attachment and eleven more for membrane fusion and core entry. The entry-fusion proteins are conserved in all poxviruses and form a complex, known as the Entry Fusion Complex (EFC), which is embedded in the membrane of the mature virion. An additional membrane that encloses the mature virion and is discarded prior to entry is present on an extracellular form of the virus. The EFC is held together by multiple interactions that depend on nine of the eleven proteins. The entry process can be divided into attachment, hemifusion and core entry. All eleven EFC proteins are required for core entry and at least eight for hemifusion. To mediate fusion the virus particle is activated by low pH, which removes one or more fusion repressors that interact with EFC components. Additional EFC-interacting fusion repressors insert into cell membranes and prevent secondary infection. The absence of detailed structural information, except for two attachment proteins and one EFC protein, is delaying efforts to determine the fusion mechanism.

  5. Meeting the challenges of global nuclear medicine technologist training in the 21st century: the IAEA Distance Assisted Training (DAT) program.

    PubMed

    Patterson, Heather E; Nunez, Margarita; Philotheou, Geraldine M; Hutton, Brian F

    2013-05-01

    Many countries have made significant investments in nuclear medicine (NM) technology with the acquisition of modern equipment and establishment of facilities, however, often appropriate training is not considered as part of these investments. Training for NM professionals is continually evolving, with a need to meet changing requirements in the workforce. Even places where established higher education courses are available, these do not necessarily cater to the practical component of training and the ever-changing technology that is central to medical imaging. The continuing advances in NM technology and growth of applications in quantitative clinical assessment place increases the pressure on technologists to learn and practice new techniques. Not only is training to understand new concepts limited but often there is inadequate training in the basics of NM and this can be a major constraint to the effective use of the evolving technology. Developing appropriate training programs for the broader international NM community is one of the goals of the International Atomic Energy Agency (IAEA). A particularly successful and relevant development has been the program on 'distance assisted training (DAT) for NM professionals'. The development of DAT was initiated in the 1990s through Australian Government funding, administered under auspices of the IAEA through its Regional Cooperative Agreement, involving most countries in Asia that are Member States of the IAEA. The project has resulted in the development of a set of training modules which are designed for use under direct supervision in the workplace, delivered through means of distance-learning. The program has undergone several revisions and peer reviews with the current version providing a comprehensive training package that is now available online. DAT has been utilized widely in Asia or the Pacific region, Latin America, and parts of Africa and Europe. Currently there are approximately 1000 registered participants

  6. Objectives and Current Status of the IAEA Network of Centers of Excellence: Training in and Demonstration of Waste Disposal Technologies in Underground Research Laboratories

    SciTech Connect

    Bell, M. J.; Knapp, M. R.

    2003-02-27

    Underground Research Laboratories (URLs) to develop and demonstrate technologies for the safe geologic disposal of radioactive wastes have been established for national purposes by several Member States of the International Atomic Energy Agency (IAEA). Under the auspices of the IAEA, nationally developed URLs and associated research institutions are being offered for use by other nations. These facilities form a Network of Centers of Excellence for training in and development of waste disposal technologies. Experience gained in the operation of the facilities, and through associated experimentation and demonstrations, will be transferred to participating Member States through hands-on work at the facilities. The Network consists of Network Members and Network Participants who share co-operative activities. Network Members are owners of facilities who have offered them to be part of the Network. At this time there are eight Members consisting of six underground facilities, a laboratory, and a university. Network Participants can potentially come from any interested IAEA Member State having spent nuclear fuel for disposal, with or without an established program for geologic disposal. There are presently about 15 Network Participants. A significant Network activity beginning in 2003 will be a Coordinated Research Project (CRP) on characterization and evaluation of swelling clays for use in engineered barrier systems of geologic repositories. At the end of this project, every involved Member State should be able to identify and characterize a swelling clay that is suitable for use in a geologic repository. As the Network grows, additional CRPs to be carried out in the Underground Research Facilities of the Network Members will be defined.

  7. Testing the methodology for dosimetry audit of heterogeneity corrections and small MLC-shaped fields: Results of IAEA multi-center studies

    PubMed Central

    Izewska, Joanna; Wesolowska, Paulina; Azangwe, Godfrey; Followill, David S.; Thwaites, David I.; Arib, Mehenna; Stefanic, Amalia; Viegas, Claudio; Suming, Luo; Ekendahl, Daniela; Bulski, Wojciech; Georg, Dietmar

    2016-01-01

    Abstract The International Atomic Energy Agency (IAEA) has a long tradition of supporting development of methodologies for national networks providing quality audits in radiotherapy. A series of co-ordinated research projects (CRPs) has been conducted by the IAEA since 1995 assisting national external audit groups developing national audit programs. The CRP ‘Development of Quality Audits for Radiotherapy Dosimetry for Complex Treatment Techniques’ was conducted in 2009–2012 as an extension of previously developed audit programs. Material and methods. The CRP work described in this paper focused on developing and testing two steps of dosimetry audit: verification of heterogeneity corrections, and treatment planning system (TPS) modeling of small MLC fields, which are important for the initial stages of complex radiation treatments, such as IMRT. The project involved development of a new solid slab phantom with heterogeneities containing special measurement inserts for thermoluminescent dosimeters (TLD) and radiochromic films. The phantom and the audit methodology has been developed at the IAEA and tested in multi-center studies involving the CRP participants. Results. The results of multi-center testing of methodology for two steps of dosimetry audit show that the design of audit procedures is adequate and the methodology is feasible for meeting the audit objectives. A total of 97% TLD results in heterogeneity situations obtained in the study were within 3% and all results within 5% agreement with the TPS predicted doses. In contrast, only 64% small beam profiles were within 3 mm agreement between the TPS calculated and film measured doses. Film dosimetry results have highlighted some limitations in TPS modeling of small beam profiles in the direction of MLC leave movements. Discussion. Through multi-center testing, any challenges or difficulties in the proposed audit methodology were identified, and the methodology improved. Using the experience of these

  8. Adjoint affine fusion and tadpoles

    NASA Astrophysics Data System (ADS)

    Urichuk, Andrew; Walton, Mark A.

    2016-06-01

    We study affine fusion with the adjoint representation. For simple Lie algebras, elementary and universal formulas determine the decomposition of a tensor product of an integrable highest-weight representation with the adjoint representation. Using the (refined) affine depth rule, we prove that equally striking results apply to adjoint affine fusion. For diagonal fusion, a coefficient equals the number of nonzero Dynkin labels of the relevant affine highest weight, minus 1. A nice lattice-polytope interpretation follows and allows the straightforward calculation of the genus-1 1-point adjoint Verlinde dimension, the adjoint affine fusion tadpole. Explicit formulas, (piecewise) polynomial in the level, are written for the adjoint tadpoles of all classical Lie algebras. We show that off-diagonal adjoint affine fusion is obtained from the corresponding tensor product by simply dropping non-dominant representations.

  9. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Mexico.

    PubMed

    Martínez-Pardo, María Esther; Morales Pedraza, Jorge; Sánchez Ramírez, Omar

    2009-05-01

    Tissue banking started in Mexico in 1948-1949, when two bone banks were established, one at the Infantile Hospital of Mexico and other at the Central Military Hospital. Mexico has benefited for the implementation of the IAEA program since through it has been able to settle down and to consolidate the Tissue Bank at the Instituto Nacional de Investigaciones Nucleares ININ (National Institute for Nuclear Research). This is the only bank in Latin America that has a Quality Management System in force, certified under ISO 9001:2000 since August 1, 2003. The first tissue processed was amnion. The main products of the BTR are amnion and pig skin. Both are biological tissues which their main use is as a wound dressing in patients with burns, scars, diabetic ulcers, epidermolysis bullosa, damaged ocular surface, etc. The General Health Law, published in 1984 and reformed in June 19, 2007, describes the procedure for the disposal of organs, tissues and human cadavers in its fourteenth title and in the Regulation for Sanitary Control. During the period 2001-2005, the ININ Tissue Bank produced 292 sterilised tissues (amnion, 86,668 cm(2), and frozen pig skin, 164,220 cm(2), at an estimated cost of 1,012,668 Mexican pesos. Until 2006, one hundred eighty five (185) patients have been treated with the use of sterilised tissues produced by the ININ Tissue Bank. The radiation source used for sterilisation of tissues is an industrial Cobalt-60 irradiator model JS-6500 AECL, which belongs to ININ. This equipment is located in other building, close to the BTR, in the Centro Nuclear de México "Dr. Nabor Carrillo Flores" (Nuclear Center of Mexico). Until 2006, six hospitals use in a routine way the sterilised tissues produced by the ININ Tissue Bank, for the treatment of burns originated by diverse agents like flame, electricity, liquids in boil, chemical reagents, as well as for the reconstruction of the ocular surface. Two of these hospitals treat patients of very low economic

  10. Information integration for data fusion

    SciTech Connect

    Bray, O.H.

    1997-01-01

    Data fusion has been identified by the Department of Defense as a critical technology for the U.S. defense industry. Data fusion requires combining expertise in two areas - sensors and information integration. Although data fusion is a rapidly growing area, there is little synergy and use of common, reusable, and/or tailorable objects and models, especially across different disciplines. The Laboratory-Directed Research and Development project had two purposes: to see if a natural language-based information modeling methodology could be used for data fusion problems, and if so, to determine whether this methodology would help identify commonalities across areas and achieve greater synergy. The project confirmed both of the initial hypotheses: that the natural language-based information modeling methodology could be used effectively in data fusion areas and that commonalities could be found that would allow synergy across various data fusion areas. The project found five common objects that are the basis for all of the data fusion areas examined: targets, behaviors, environments, signatures, and sensors. Many of the objects and the specific facts related to these objects were common across several areas and could easily be reused. In some cases, even the terminology remained the same. In other cases, different areas had their own terminology, but the concepts were the same. This commonality is important with the growing use of multisensor data fusion. Data fusion is much more difficult if each type of sensor uses its own objects and models rather than building on a common set. This report introduces data fusion, discusses how the synergy generated by this LDRD would have benefited an earlier successful project and contains a summary information model from that project, describes a preliminary management information model, and explains how information integration can facilitate cross-treaty synergy for various arms control treaties.

  11. Fusion heating technology

    SciTech Connect

    Cole, A.J.

    1982-06-01

    John Lawson established the criterion that in order to produce more energy from fusion than is necessary to heat the plasma and replenish the radiation losses, a minimum value for both the product of plasma density and confinement time t, and the temperature must be achieved. There are two types of plasma heating: neutral beam and electromagnetic wave heating. A neutral beam system is shown. Main development work on negative ion beamlines has focused on the difficult problem of the production of high current sources. The development of a 30 keV-1 ampere multisecond source module is close to being accomplished. In electromagnetic heating, the launcher, which provides the means of coupling the power to the plasma, is most important. The status of heating development is reviewed. Electron cyclotron resonance heating (ECRH), lower hybrid heating (HHH), and ion cyclotron resonance heating (ICRH) are reviewed.

  12. Fusion Power Demonstration III

    SciTech Connect

    Lee, J.D.

    1985-07-01

    This is the third in the series of reports covering the Fusion Power Demonstration (FPD) design study. This volume considers the FPD-III configuration that incorporates an octopole end plug. As compared with the quadrupole end-plugged designs of FPD-I and FPD-II, this octopole configuration reduces the number of end cell magnets and shortens the minimum ignition length of the central cell. The end-cell plasma length is also reduced, which in turn reduces the size and cost of the end cell magnets and shielding. As a contiuation in the series of documents covering the FPD, this report does not stand alone as a design description of FPD-III. Design details of FPD-III subsystems that do not differ significantly from those of the FPD-II configuration are not duplicated in this report.

  13. Fusion pumped light source

    DOEpatents

    Pappas, Daniel S.

    1989-01-01

    Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

  14. Fusion pumped laser

    DOEpatents

    Pappas, Daniel S.

    1989-01-01

    Apparatus is provided for generating energy in the form of laser radiation. A tokamak fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The tokamak design provides a temperature and a magnetic field which is effective to generate a neutron flux of at least 10.sup.15 neutrons/cm.sup.2.s. A conversion medium receives neutrons from the tokamak and converts the high-energy neutrons to an energy source with an intensity and an energy effective to excite a preselected lasing medium. The energy source typically comprises fission fragments, alpha particles, and radiation from a fission event. A lasing medium is provided which is responsive to the energy source to generate a population inversion which is effective to support laser oscillations for generating output radiation.

  15. Multiple shell fusion targets

    DOEpatents

    Lindl, J.D.; Bangerter, R.O.

    1975-10-31

    Multiple shell fusion targets for use with electron beam and ion beam implosion systems are described. The multiple shell targets are of the low-power type and use a separate relatively low Z, low density ablator at large radius for the outer shell, which reduces the focusing and power requirements of the implosion system while maintaining reasonable aspect ratios. The targets use a high Z, high density pusher shell placed at a much smaller radius in order to obtain an aspect ratio small enough to protect against fluid instability. Velocity multiplication between these shells further lowers the power requirements. Careful tuning of the power profile and intershell density results in a low entropy implosion which allows breakeven at low powers. For example, with ion beams as a power source, breakeven at 10-20 Terrawatts with 10 MeV alpha particles for imploding a multiple shell target can be accomplished.

  16. Fusion reactor pumped laser

    DOEpatents

    Jassby, D.L.

    1987-09-04

    A nuclear pumped laser capable of producing long pulses of very high power laser radiation is provided. A toroidal fusion reactor provides energetic neutrons which are slowed down by a moderator. The moderated neutrons are converted to energetic particles capable of pumping a lasing medium. The lasing medium is housed in an annular cell surrounding the reactor. The cell includes an annular reflecting mirror at the bottom and an annular output window at the top. A neutron reflector is disposed around the cell to reflect escaping neutrons back into the cell. The laser radiation from the annular window is focused onto a beam compactor which generates a single coherent output laser beam. 10 figs.

  17. Microwave superheaters for fusion

    SciTech Connect

    Campbell, R.B.; Hoffman, M.A.; Logan, B.G.

    1987-10-16

    The microwave superheater uses the synchrotron radiation from a thermonuclear plasma to heat gas seeded with an alkali metal to temperatures far above the temperature of material walls. It can improve the efficiency of the Compact Fusion Advanced Rankine (CFAR) cycle described elsewhere in these proceedings. For a proof-of-principle experiment using helium, calculations show that a gas superheat ..delta..T of 2000/sup 0/K is possible when the wall temperature is maintained at 1000/sup 0/K. The concept can be scaled to reactor grade systems. Because of the need for synchrotron radiation, the microwave superheater is best suited for use with plasmas burning an advanced fuel such as D-/sup 3/He. 5 refs.

  18. Prospects for bubble fusion

    SciTech Connect

    Nigmatulin, R.I.; Lahey, R.T. Jr.

    1995-09-01

    In this paper a new method for the realization of fusion energy is presented. This method is based on the superhigh compression of a gas bubble (deuterium or deuterium/thritium) in heavy water or another liquid. The superhigh compression of a gas bubble in a liquid is achieved through forced non-linear, non-periodic resonance oscillations using moderate amplitudes of forcing pressure. The key feature of this new method is a coordination of the forced liquid pressure change with the change of bubble volume. The corresponding regime of the bubble oscillation has been called {open_quotes}basketball dribbling (BD) regime{close_quotes}. The analytical solution describing this process for spherically symmetric bubble oscillations, neglecting dissipation and compressibility of the liquid, has been obtained. This solution shown no limitation on the supercompression of the bubble and the corresponding maximum temperature. The various dissipation mechanisms, including viscous, conductive and radiation heat losses have been considered. It is shown that in spite of these losses it is possible to achieve very high gas bubble temperatures. This because the time duration of the gas bubble supercompression becomes very short when increasing the intensity of compression, thus limiting the energy losses. Significantly, the calculated maximum gas temperatures have shown that nuclear fusion may be possible. First estimations of the affect of liquid compressibility have been made to determine possible limitations on gas bubble compression. The next step will be to investigate the role of interfacial instability and breaking down of the bubble, shock wave phenomena around and in the bubble and mutual diffusion of the gas and the liquid.

  19. Soldier systems sensor fusion

    NASA Astrophysics Data System (ADS)

    Brubaker, Kathryne M.

    1998-08-01

    This paper addresses sensor fusion and its applications in emerging Soldier Systems integration and the unique challenges associated with the human platform. Technology that,provides the highest operational payoff in a lightweight warrior system must not only have enhanced capabilities, but have low power components resulting in order of magnitude reductions coupled with significant cost reductions. These reductions in power and cost will be achieved through partnership with industry and leveraging of commercial state of the art advancements in microelectronics and power sources. As new generation of full solution fire control systems (to include temperature, wind and range sensors) and target acquisition systems will accompany a new generation of individual combat weapons and upgrade existing weapon systems. Advanced lightweight thermal, IR, laser and video senors will be used for surveillance, target acquisition, imaging and combat identification applications. Multifunctional sensors will provide embedded training features in combat configurations allowing the soldier to 'train as he fights' without the traditional cost and weight penalties associated with separate systems. Personal status monitors (detecting pulse, respiration rate, muscle fatigue, core temperature, etc.) will provide commanders and highest echelons instantaneous medical data. Seamless integration of GPS and dead reckoning (compass and pedometer) and/or inertial sensors will aid navigation and increase position accuracy. Improved sensors and processing capability will provide earlier detection of battlefield hazards such as mines, enemy lasers and NBC (nuclear, biological, chemical) agents. Via the digitized network the situational awareness database will automatically be updated with weapon, medical, position and battlefield hazard data. Soldier Systems Sensor Fusion will ultimately establish each individual soldier as an individual sensor on the battlefield.

  20. LiWall Fusion - The New Concept of Magnetic Fusion

    SciTech Connect

    L.E. Zakharov

    2011-01-12

    Utilization of the outstanding abilities of a liquid lithium layer in pumping hydrogen isotopes leads to a new approach to magnetic fusion, called the LiWall Fusion. It relies on innovative plasma regimes with low edge density and high temperature. The approach combines fueling the plasma by neutral injection beams with the best possible elimination of outside neutral gas sources, which cools down the plasma edge. Prevention of cooling the plasma edge suppresses the dominant, temperature gradient related turbulence in the core. Such an approach is much more suitable for controlled fusion than the present practice, relying on high heating power for compensating essentially unlimited turbulent energy losses.

  1. Use of Clearance Indexes to Assess Waste Disposal Issues for the HYLIFE-II Inertial Fusion Energy Power Plant Design

    SciTech Connect

    Reyes, S; Latkowski, J F; Sanz, J

    2002-01-17

    Traditionally, waste management studies for fusion energy have used the Waste Disposal Rating (WDR) to evaluate if radioactive material from irradiated structures could qualify for shallow land burial. However, given the space limitations and the negative public perception of large volumes of waste, there is a growing international motivation to develop a fusion waste management system that maximizes the amount of material that can be cleared or recycled. In this work, we present an updated assessment of the waste management options for the HYLIFE-II inertial fusion energy (IFE) power plant, using the concept of Clearance Index (CI) for radioactive waste disposal. With that purpose, we have performed a detailed neutronics analysis of the HYLIFE-II design, using the TART and ACAB computer codes for neutron transport and activation, respectively. Whereas the traditional version of ACAB only provided the user with the WDR as an index for waste considerations, here we have modified the code to calculate Clearance Indexes using the current International Atomic Energy Agency (IAEA) clearance limits for radiological waste disposal. The results from the analysis are used to perform an assessment of the waste management options for the HYLIFE-II IFE design.

  2. Analytical performance evaluation for autonomous sensor fusion

    NASA Astrophysics Data System (ADS)

    Chang, K. C.

    2008-04-01

    A distributed data fusion system consists of a network of sensors, each capable of local processing and fusion of sensor data. There has been a great deal of work in developing distributed fusion algorithms applicable to a network centric architecture. Currently there are at least a few approaches including naive fusion, cross-correlation fusion, information graph fusion, maximum a posteriori (MAP) fusion, channel filter fusion, and covariance intersection fusion. However, in general, in a distributed system such as the ad hoc sensor networks, the communication architecture is not fixed. Each node has knowledge of only its local connectivity but not the global network topology. In those cases, the distributed fusion algorithm based on information graph type of approach may not scale due to its requirements to carry long pedigree information for decorrelation. In this paper, we focus on scalable fusion algorithms and conduct analytical performance evaluation to compare their performance. The goal is to understand the performance of those algorithms under different operating conditions. Specifically, we evaluate the performance of channel filter fusion, Chernoff fusion, Shannon Fusion, and Battachayya fusion algorithms. We also compare their results to NaÃve fusion and "optimal" centralized fusion algorithms under a specific communication pattern.

  3. Fusion Simulation Project Workshop Report

    NASA Astrophysics Data System (ADS)

    Kritz, Arnold; Keyes, David

    2009-03-01

    The mission of the Fusion Simulation Project is to develop a predictive capability for the integrated modeling of magnetically confined plasmas. This FSP report adds to the previous activities that defined an approach to integrated modeling in magnetic fusion. These previous activities included a Fusion Energy Sciences Advisory Committee panel that was charged to study integrated simulation in 2002. The report of that panel [Journal of Fusion Energy 20, 135 (2001)] recommended the prompt initiation of a Fusion Simulation Project. In 2003, the Office of Fusion Energy Sciences formed a steering committee that developed a project vision, roadmap, and governance concepts [Journal of Fusion Energy 23, 1 (2004)]. The current FSP planning effort involved 46 physicists, applied mathematicians and computer scientists, from 21 institutions, formed into four panels and a coordinating committee. These panels were constituted to consider: Status of Physics Components, Required Computational and Applied Mathematics Tools, Integration and Management of Code Components, and Project Structure and Management. The ideas, reported here, are the products of these panels, working together over several months and culminating in a 3-day workshop in May 2007.

  4. Control of mechanically activated polymersome fusion: Factors affecting fusion

    DOE PAGES

    Henderson, Ian M.; Paxton, Walter F.

    2014-12-15

    Previously we have studied the mechanically-activated fusion of extruded (200 nm) polymer vesicles into giant polymersomes using agitation in the presence of salt. In this study we have investigated several factors contributing to this phenomenon, including the effects of (i) polymer vesicle concentration, (ii) agitation speed and duration, and iii) variation of the salt and its concentration. It was found that increasing the concentration of the polymer dramatically increases the production of giant vesicles through the increased collisions of polymersomes. Our investigations also found that increasing the frequency of agitation increased the efficiency of fusion, though ultimately limited the sizemore » of vesicle which could be produced due to the high shear involved. Finally it was determined that salt-mediation of the fusion process was not limited to NaCl, but is instead a general effect facilitated by the presence of solvated ionic compounds, albeit with different salts initiating fusion at different concentration.« less

  5. Control of mechanically activated polymersome fusion: Factors affecting fusion

    SciTech Connect

    Henderson, Ian M.; Paxton, Walter F.

    2014-12-15

    Previously we have studied the mechanically-activated fusion of extruded (200 nm) polymer vesicles into giant polymersomes using agitation in the presence of salt. In this study we have investigated several factors contributing to this phenomenon, including the effects of (i) polymer vesicle concentration, (ii) agitation speed and duration, and iii) variation of the salt and its concentration. It was found that increasing the concentration of the polymer dramatically increases the production of giant vesicles through the increased collisions of polymersomes. Our investigations also found that increasing the frequency of agitation increased the efficiency of fusion, though ultimately limited the size of vesicle which could be produced due to the high shear involved. Finally it was determined that salt-mediation of the fusion process was not limited to NaCl, but is instead a general effect facilitated by the presence of solvated ionic compounds, albeit with different salts initiating fusion at different concentration.

  6. Advanced fusion concepts: project summaries

    SciTech Connect

    1980-12-01

    This report contains descriptions of the activities of all the projects supported by the Advanced Fusion Concepts Branch of the Office of Fusion Energy, US Department of Energy. These descriptions are project summaries of each of the individual projects, and contain the following: title, principle investigators, funding levels, purpose, approach, progress, plans, milestones, graduate students, graduates, other professional staff, and recent publications. Information is given for each of the following programs: (1) reverse-field pinch, (2) compact toroid, (3) alternate fuel/multipoles, (4) stellarator/torsatron, (5) linear magnetic fusion, (6) liners, and (7) Tormac. (MOW)

  7. Effect of aniseikonia on fusion.

    PubMed

    Sharma, P; Prakash, P

    1991-01-01

    Physiological aniseikonia is the basis of stereopsis but beyond certain limits it becomes an obstacle to fusion. It is not well established as to how much aniseikonia can be tolerated by the fusional mechanism. Different tests under different testing conditions have given a wide range of variation. On the synoptophore we had observed tolerance upto 35% aniseikonia in some cases. Under more physiological conditions on a polaroid dissociation stereoprojector we observed lesser baseline fusional vergences but tolerance in about 70% of the cases upto 30% aniseikonia while 25% could tolerate even 35% aniseikonia. However we realise that these indicate the maximal potential and not the symptom free tolerable limits.

  8. The path to fusion power†

    PubMed Central

    Smith, Chris Llewellyn; Cowley, Steve

    2010-01-01

    The promise, status and challenges of developing fusion power are outlined. The key physics and engineering principles are described and recent progress quantified. As the successful demonstration of 16 MW of fusion in 1997 in the Joint European Torus showed, fusion works. The central issue is therefore to make it work reliably and economically on the scale of a power station. We argue that to meet this challenge in 30 years we must follow the aggressive programme known as the ‘Fast Track to Fusion’. This programme is described in some detail. PMID:20123748

  9. Overall results of and lessons learned from the IAEA CRP on sodium natural circulation test performed during the Phenix end-of-life experiments

    SciTech Connect

    Monti, S.; Toti, A.; Tenchine, D.; Pialla, D.

    2012-07-01

    In 2007, the International Atomic Energy Agency (IAEA) launched the Coordinated Research Project (CRP) 'Control Rod Withdrawal and Sodium Natural Circulation Tests Performed during the Phenix End-of-Life Experiments'. The overall purpose of the CRP, performed within the framework of the IAEA programme in support of innovative fast reactor technology development and deployment, is to improve the Member States' analytical capabilities in the various fields of research and design of sodium-cooled fast reactors through data and codes verification and validation. In particular the CRP, taking advantage of the End-of-Life set of experiments performed before the final shut-down of the French prototype fast breeder power reactor Phenix, aims at improving fast reactor simulation methods and design capabilities in the field of temperature and power distribution evaluation, as well as of the analysis of sodium natural circulation phenomena. The paper presents the overall results of the CRP, including blind calculations and post-test and sensitivity analyses carried out by the CRP participants, as well as lessons learned and recommendations for further future implementations to resolve open issues. (authors)

  10. IAEA Co-ordinated Research Project: update of X-ray and gamma-ray decay data standards for detector calibration and other applications.

    PubMed

    Nichols, Alan L

    2004-01-01

    A Co-ordinated Research Project (CRP) was established in 1998 by the IAEA Nuclear Data Section (Update of X-ray and gamma-ray Decay Data Standards for Detector Calibration and Other Applications), in order to improve further the recommended decay data used to undertake efficiency calibrations of gamma-ray detectors. Participants in this CRP reviewed and modified the list of radionuclides most suited for detector efficiency calibration, and also considered the decay-data needs for safeguards, waste management, dosimetry, nuclear medicine, material analysis and environmental monitoring. Overall, 62 radionuclides were selected for decay-data evaluation, along with four parent-daughter combinations and two natural decay chains. gamma-ray emissions from specific nuclear reactions were also included to extend the calibrant energy well beyond 10 MeV. A significant number of these decay-data evaluations have been completed, and an IAEA-TECDOC report and database are in the process of being assembled for planned completion by the end of 2003.

  11. Generalized Chernoff Fusion Approximation for Practical Distributed Data Fusion

    DTIC Science & Technology

    2009-07-01

    Generalized Chernoff Fusion Approximation for Practical Distributed Data Fusion William J. Farrell III R&D Department Adaptive Methods , Inc...independence or modify legacy systems with pedigree tagging techniques . Leveraging the well- known Covariance Intersection algorithm, its generalization...Adaptive Methods , Inc.,Centreville, VA , , 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR

  12. Characterization of fusion genes and the significantly expressed fusion isoforms in breast cancer by hybrid sequencing.

    PubMed

    Weirather, Jason L; Afshar, Pegah Tootoonchi; Clark, Tyson A; Tseng, Elizabeth; Powers, Linda S; Underwood, Jason G; Zabner, Joseph; Korlach, Jonas; Wong, Wing Hung; Au, Kin Fai

    2015-10-15

    We developed an innovative hybrid sequencing approach, IDP-fusion, to detect fusion genes, determine fusion sites and identify and quantify fusion isoforms. IDP-fusion is the first method to study gene fusion events by integrating Third Generation Sequencing long reads and Second Generation Sequencing short reads. We applied IDP-fusion to PacBio data and Illumina data from the MCF-7 breast cancer cells. Compared with the existing tools, IDP-fusion detects fusion genes at higher precision and a very low false positive rate. The results show that IDP-fusion will be useful for unraveling the complexity of multiple fusion splices and fusion isoforms within tumorigenesis-relevant fusion genes.

  13. Osmotic control of bilayer fusion.

    PubMed Central

    Fisher, L R; Parker, N S

    1984-01-01

    We have used photography and capacitance measurement to monitor the steps in the interaction and eventual fusion of optically black lipid bilayers (BLMs), hydrostatically bulged to approximately hemispherical shape and pushed together mechanically. A necessary first step is drainage of aqueous solution from between the bilayers to allow close contact of the bilayers. The drainage can be controlled by varying the osmotic difference across the bilayers. If the differences are such as to remove water from between the bilayers, fusion occurs after a time that depends on the net osmotic difference and the area of contact. If there is an osmotic flow of water into the space between the bilayers, fusion never occurs. In the fusion process, a single central bilayer forms from the original apposed pair of bilayers. The central bilayer may later burst to allow mixing of the two volumes originally bounded by the separate bilayer; the topological equivalent of exocytosis. Images FIGURE 2 PMID:6541065

  14. Overview of fusion reactor safety

    SciTech Connect

    Cohen, S.; Crocker, J.G.

    1981-01-01

    Use of deuterium-tritium burning fusion reactors requires examination of several major safety and environmental issues: (1) tritium inventory control, (2) neutron activation of structural materials, fluid streams and reactor hall environment, (3) release of radioactivity from energy sources including lithium spill reactions, superconducting magnet stored energy release, and plasma disruptions, (4) high magnetic and electromagnetic fields associated with fusion reactor superconducting magnets and radio frequency heating devices, and (5) handling and disposal of radioactive waste. Early recognition of potential safety problems with fusion reactors provides the opportunity for improvement in design and materials to eliminate or greatly reduce these problems. With an early start in this endeavor, fusion should be among the lower risk technologies for generation of commercial electrical power.

  15. Pulsed Power Driven Fusion Energy

    SciTech Connect

    SLUTZ,STEPHEN A.

    1999-11-22

    Pulsed power is a robust and inexpensive technology for obtaining high powers. Considerable progress has been made on developing light ion beams as a means of transporting this power to inertial fusion capsules. However, further progress is hampered by the lack of an adequate ion source. Alternatively, z-pinches can efficiently convert pulsed power into thermal radiation, which can be used to drive an inertial fusion capsule. However, a z-pinch driven fusion explosion will destroy a portion of the transmission line that delivers the electrical power to the z-pinch. They investigate several options for providing standoff for z-pinch driven fusion. Recyclable Transmission Lines (RTLs) appear to be the most promising approach.

  16. The IAEA coordinated research programme on HTGR uncertainty analysis: Phase I status and Ex. I-1 prismatic reference results

    DOE PAGES

    Bostelmann, Friederike; Strydom, Gerhard; Reitsma, Frederik; ...

    2016-01-11

    The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied, in contrast to the historical approach where sensitivity analysis were performed and uncertainties then determined by a simplified statistical combination of a few important inputmore » parameters. New methodologies are currently under development in the OECD/NEA Light Water Reactor (LWR) Uncertainty Analysis in Best-Estimate Modelling (UAM) benchmark activity. High Temperature Gas-cooled Reactor (HTGR) designs require specific treatment of the double heterogeneous fuel design and large graphite quantities at high temperatures. The IAEA has therefore launched a Coordinated Research Project (CRP) on HTGR Uncertainty Analysis in Modelling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the Chinese HTR-PM. Work has started on the first phase and the current CRP status is reported in the paper. A comparison of the Serpent and SCALE/KENO-VI reference Monte Carlo results for Ex. I-1 of the MHTGR-350 design is also included. It was observed that the SCALE/KENO-VI Continuous Energy (CE) k∞ values were 395 pcm (Ex. I-1a) to 803 pcm (Ex. I-1b) higher than the respective Serpent lattice calculations, and that within the set of the SCALE results, the KENO-VI 238 Multi-Group (MG) k∞ values were up to 800 pcm lower than the KENO-VI CE values. The use of the

  17. The IAEA coordinated research programme on HTGR uncertainty analysis: Phase I status and Ex. I-1 prismatic reference results

    SciTech Connect

    Bostelmann, Friederike; Strydom, Gerhard; Reitsma, Frederik; Ivanov, Kostadin

    2016-01-11

    The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied, in contrast to the historical approach where sensitivity analysis were performed and uncertainties then determined by a simplified statistical combination of a few important input parameters. New methodologies are currently under development in the OECD/NEA Light Water Reactor (LWR) Uncertainty Analysis in Best-Estimate Modelling (UAM) benchmark activity. High Temperature Gas-cooled Reactor (HTGR) designs require specific treatment of the double heterogeneous fuel design and large graphite quantities at high temperatures. The IAEA has therefore launched a Coordinated Research Project (CRP) on HTGR Uncertainty Analysis in Modelling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the Chinese HTR-PM. Work has started on the first phase and the current CRP status is reported in the paper. A comparison of the Serpent and SCALE/KENO-VI reference Monte Carlo results for Ex. I-1 of the MHTGR-350 design is also included. It was observed that the SCALE/KENO-VI Continuous Energy (CE) k values were 395 pcm (Ex. I-1a) to 803 pcm (Ex. I-1b) higher than the respective Serpent lattice calculations, and that within the set of the SCALE results, the KENO-VI 238 Multi-Group (MG) k values were up to 800 pcm lower than the KENO-VI CE values. The

  18. A comparative study of (129)I content in environmental standard materials IAEA-375, NIST SRM 4354 and NIST SRM 4357 by Thermal Ionization Mass Spectrometry and Accelerator Mass Spectrometry.

    PubMed

    Olson, John; Adamic, Mary; Snyder, Darin; Brookhart, Jacob; Hahn, Paula; Watrous, Matthew

    2017-01-25

    Iodine environmental measurements have consistently been validated in the literature using the standard material IAEA-375, soil collected approximately 160 miles northeast of Chernobyl, which is currently the only soil/sediment material with a certified (129)I activity. IAEA-375 has not been available for purchase since approximately 2010. Two other standard materials that are available (NIST SRM 4354, freshwater lake sediment and NIST SRM 4357, ocean sediment) have certified activities for a variety of radionuclides but not for (129)I. This paper reports a comparison of TIMS and AMS data for all three standards.

  19. Magnetic fusion 1985: what next

    SciTech Connect

    Fowler, T.K.

    1985-03-01

    Recent budget reductions for magnetic fusion have led to a re-examination of program schedules and objectives. Faced with delays and postponement of major facilities as previously planned, some have called for a near-term focus on science, others have stressed technology. This talk will suggest a different focus as the keynote for this conference, namely, the applications of fusion. There is no doubt that plasma science is by now mature and fusion technology is at the forefront. This has and will continue to benefit many fields of endeavor, both in actual new discoveries and techniques and in attracting and training scientists and engineers who move on to make significant contributions in science, defense and industry. Nonetheless, however superb the science or how challenging the technology, these are means, not ends. To maintain its support, the magnetic fusion program must also offer the promise of power reactors that could be competitive in the future. At this conference, several new reactor designs will be described that claim to be smaller and economically competitive with fission reactors while retaining the environmental and safety characteristics that are the hallmark of fusion. The American Nuclear Society is an appropriate forum in which to examine these new designs critically, and to stimulate better ideas and improvements. As a preview, this talk will include brief discussions of new tokamak, tandem mirror and reversed field pinch reactor designs to be presented in later sessions. Finally, as a preview of the session on fusion breeders, the talk will explore once again the economic implications of a new nuclear age, beginning with improved fission reactors fueled by fusion breeders, then ultimately evolving to reactors based solely on fusion.

  20. Horizontal model fusion paradigm

    NASA Astrophysics Data System (ADS)

    Julier, Simon J.; Durrant-Whyte, Hugh F.

    1996-05-01

    In navigation and tracking problems, the identification of an appropriate model of vehicular or target motion is vital to most practical data fusion algorithms. The true system dynamics are rarely known, and approximations are usually employed. Since systems can exhibit strikingly different behaviors, multiple models may be needed to describe each of these behaviors. Current methods either use model switching (a single process model is chosen from the set using a decision rule) or consider the models as a set of competing hypothesis, only one of which is 'correct'. However, these methods fail to exploit the fact that all models are of the same system and that all of them are, to some degree, 'correct'. In this paper we present a new paradigm for fusing information from a set of multiple process models. The predictions from each process model are regarded as observations which are corrupted by correlated noise. By employing the standard Kalman filter equations we combine data from multiple sensors and multiple process models optimally. There are a number of significant practical advantages to this technique. First, the performance of the system always equals or betters that of the best estimator in the set of models being used. Second, the same decision theoretic machinery can be used to select the process models as well as the sensor suites.

  1. Cold fusion verification

    NASA Astrophysics Data System (ADS)

    North, M. H.; Mastny, G. F.; Wesley, E. J.

    1991-03-01

    The objective of this work to verify and reproduce experimental observations of Cold Nuclear Fusion (CNF), as originally reported in 1989. The method was to start with the original report and add such additional information as became available to build a set of operational electrolytic CNF cells. Verification was to be achieved by first observing cells for neutron production, and for those cells that demonstrated a nuclear effect, careful calorimetric measurements were planned. The authors concluded, after laboratory experience, reading published work, talking with others in the field, and attending conferences, that CNF probably is chimera and will go the way of N-rays and polywater. The neutron detector used for these tests was a completely packaged unit built into a metal suitcase that afforded electrostatic shielding for the detectors and self-contained electronics. It was battery-powered, although it was on charge for most of the long tests. The sensor element consists of He detectors arranged in three independent layers in a solid moderating block. The count from each of the three layers as well as the sum of all the detectors were brought out and recorded separately. The neutron measurements were made with both the neutron detector and the sample tested in a cave made of thick moderating material that surrounded the two units on the sides and bottom.

  2. Prospects for Tokamak Fusion Reactors

    SciTech Connect

    Sheffield, J.; Galambos, J.

    1995-04-01

    This paper first reviews briefly the status and plans for research in magnetic fusion energy and discusses the prospects for the tokamak magnetic configuration to be the basis for a fusion power plant. Good progress has been made in achieving fusion reactor-level, deuterium-tritium (D-T) plasmas with the production of significant fusion power in the Joint European Torus (up to 2 MW) and the Tokamak Fusion Test Reactor (up to 10 MW) tokamaks. Advances on the technologies of heating, fueling, diagnostics, and materials supported these achievements. The successes have led to the initiation of the design phases of two tokamaks, the International Thermonuclear Experimental Reactor (ITER) and the US Toroidal Physics Experiment (TPX). ITER will demonstrate the controlled ignition and extended bum of D-T plasmas with steady state as an ultimate goal. ITER will further demonstrate technologies essential to a power plant in an integrated system and perform integrated testing of the high heat flux and nuclear components required to use fusion energy for practical purposes. TPX will complement ITER by testing advanced modes of steady-state plasma operation that, coupled with the developments in ITER, will lead to an optimized demonstration power plant.

  3. Recent magneto-inertial fusion experiments on the field reversed configuration heating experiment

    NASA Astrophysics Data System (ADS)

    Degnan, J. H.; Amdahl, D. J.; Domonkos, M.; Lehr, F. M.; Grabowski, C.; Robinson, P. R.; Ruden, E. L.; White, W. M.; Wurden, G. A.; Intrator, T. P.; Sears, J.; Weber, T.; Waganaar, W. J.; Frese, M. H.; Frese, S. D.; Camacho, J. F.; Coffey, S. K.; Makhin, V.; Roderick, N. F.; Gale, D. G.; Kostora, M.; Lerma, A.; McCullough, J. L.; Sommars, W.; Kiuttu, G. F.; Bauer, B.; Fuelling, S. R.; Siemon, R. E.; Lynn, A. G.; Turchi, P. J.

    2013-09-01

    Magneto-inertial fusion (MIF) approaches take advantage of an embedded magnetic field to improve plasma energy confinement by reducing thermal conduction relative to conventional inertial confinement fusion (ICF). MIF reduces required precision in the implosion and the convergence ratio. Since 2008 (Wurden et al 2008 IAEA 2008 Fusion Energy Conf. (Geneva, Switzerland, 13-18 October) IC/P4-13 LA-UR-08-0796) and since our prior refereed publication on this topic (Degnan et al 2008 IEEE Trans. Plasma Sci. 36 80), AFRL and LANL have developed further one version of MIF. We have (1) reliably formed, translated, and captured field reversed configurations (FRCs) in magnetic mirrors inside metal shells or liners in preparation for subsequent compression by liner implosion; (2) imploded a liner with interior magnetic mirror field, obtaining evidence for compression of a 1.36 T field to 540 T (3) performed a full system experiment of FRC formation, translation, capture, and imploding liner compression operation; (4) identified by comparison of 2D-MHD simulation and experiments factors limiting the closed-field lifetime of FRCs to about half that required for good liner compression of FRCs to multi-keV, 1019 ion cm-3, high energy density plasma (HEDP) conditions; and (5) designed and prepared hardware to increase that closed-field FRC lifetime to the required amount. Those lifetime experiments are now underway, with the goal of at least doubling closed-field FRC lifetimes and performing FRC implosions to HEDP conditions this year. These experiments have obtained imaging evidence of FRC rotation, and of initial rotation control measures slowing and stopping such rotation. Important improvements in fidelity of simulation to experiment have been achieved, enabling improved guidance and understanding of experiment design and performance.

  4. 2013 Nuclear Fusion Prize Acceptance Speech 2013 Nuclear Fusion Prize Acceptance Speech

    NASA Astrophysics Data System (ADS)

    Whyte, D.

    2015-01-01

    I would like to express gratitude to the IAEA, the journal Nuclear Fusion and its board for this acknowledgement of work carried out at the MIT Alcator C-Mod tokamak. I must begin by making it clear that this is in no way an award to an individual. The experiments, data analysis and paper were a true collaborative effort from the C-Mod team. It is a honor to work with them and to accept the award on their behalf. I would also like to thank the US Department of Energy for their support in funding this research. The paper describes the exploration of the 'improved' confinement regime dubbed 'I-mode'. The distinguishing feature of this operational mode is a robust boundary pedestal in temperature with the somewhat surprising lack of any form of density pedestal. Thus the regime exhibits an enhanced energy confinement similar to H-mode, roughly double of L-mode at fixed input power, yet has global fuel and impurity particle transport of L-mode. These features are intriguing from a scientific and practical point of view. On the science side it is extremely useful to obtain such a clear demarcation between the energy and particle transport. For example, soon after its discovery, the I-mode was used to extract the observation that the edge T pedestal is the strongest determinant for intrinsic rotation in work by John Rice, Pat Diamond and colleagues. Recent results regarding core transport by Anne White, Nate Howard and colleagues show that I-mode has intriguing properties with respect to core response of fluctuations and profile stiffness. Mike Churchill's recent Ph. D study on C-Mod shows that I-mode exhibits no strong poloidal impurity asymmetry, unlike H-mode. The I-mode posed an interesting test for the peeling-ballooning-KBM model of the pedestal, the subject of the 2014 Nuclear Fusion award of Phil Snyder, and was examined by John Walk and Jerry Hughes showing that in fact the lack of the density pedestal pushed the I-mode far away from the P-B limit, and thus the

  5. Successful anterior fusion following posterior cervical fusion for revision of anterior cervical discectomy and fusion pseudarthrosis.

    PubMed

    Elder, Benjamin D; Sankey, Eric W; Theodros, Debebe; Bydon, Mohamad; Goodwin, C Rory; Lo, Sheng-Fu; Kosztowski, Thomas A; Belzberg, Allen J; Wolinsky, Jean-Paul; Sciubba, Daniel M; Gokaslan, Ziya L; Bydon, Ali; Witham, Timothy F

    2016-02-01

    Pseudarthrosis occurs after approximately 2-20% of anterior cervical discectomy and fusion (ACDF) procedures; it is unclear if posterior or anterior revision should be pursued. In this study, we retrospectively evaluate the outcomes in 22 patients with pseudarthrosis following ACDF and revision via posterior cervical fusion (PCF). Baseline demographics, preoperative symptoms, operative data, time to fusion failure, symptoms of pseudarthrosis, and revision method were assessed. Fusion outcome and clinical outcome were determined at last follow-up (LFU). Thirteen females (59%) and 9 (41%) males experienced pseudarthrosis at a median of 11 (range: 3-151)months after ACDF. Median age at index surgery was 51 (range: 33-67)years. All patients with pseudarthrosis presented with progressive neck pain, with median visual analog scale (VAS) score of 8 (range: 0-10), and/or myeloradiculopathy. Patients with pseudarthrosis <12 months compared to >12 months after index surgery were older (p=0.013), had more frequent preoperative neurological deficits (p=0.064), and lower baseline VAS scores (p=0.006). Fusion was successful after PCF in all patients, with median time to fusion of 10 (range: 2-14)months. Eighteen patients fused both anteriorly and posteriorly, two patients fused anteriorly only, and two patients fused posteriorly only. Median VAS neck score at LFU significantly improved from the time of pseudarthrosis (p=0.012). While uncommon, pseudarthrosis may occur after ACDF. All patients achieved successful fusion after subsequent posterior cervical fusion, with 91% fusing a previous anterior pseudarthrosis after posterior stabilization. Neck pain significantly improved by LFU in the majority of patients in this study.

  6. Novel Hydrophobin Fusion Tags for Plant-Produced Fusion Proteins

    PubMed Central

    Ritala, Anneli; Linder, Markus; Joensuu, Jussi

    2016-01-01

    Hydrophobin fusion technology has been applied in the expression of several recombinant proteins in plants. Until now, the technology has relied exclusively on the Trichoderma reesei hydrophobin HFBI. We screened eight novel hydrophobin tags, T. reesei HFBII, HFBIII, HFBIV, HFBV, HFBVI and Fusarium verticillioides derived HYD3, HYD4 and HYD5, for production of fusion proteins in plants and purification by two-phase separation. To study the properties of the hydrophobins, we used N-terminal and C-terminal GFP as a fusion partner. Transient expression of the hydrophobin fusions in Nicotiana benthamiana revealed large variability in accumulation levels, which was also reflected in formation of protein bodies. In two-phase separations, only HFBII and HFBIV were able to concentrate GFP into the surfactant phase from a plant extract. The separation efficiency of both tags was comparable to HFBI. When the accumulation was tested side by side, HFBII-GFP gave a better yield than HFBI-GFP, while the yield of HFBIV-GFP remained lower. Thus we present here two alternatives for HFBI as functional fusion tags for plant-based protein production and first step purification. PMID:27706254

  7. Counting efficiency of whole-body monitoring system using BOMAB and ANSI/IAEA thyroid phantom due to internal contamination of 131I.

    PubMed

    Ghare, V P; Patni, H K; Akar, D K; Rao, D D

    2014-12-01

    In this study, the effect of Indian reference BOttle MAnnikin aBsorber (BOMAB) neck with axial cavity and American National Standards Institute (ANSI)/International Atomic Energy Agency (IAEA) thyroid phantom using pencil sources of (133)Ba ((131)I simulant) on counting efficiency (CE) is seen experimentally in static geometry for whole-body monitoring system comprising 10.16-cm diameter and 7.62-cm-thick NaI(Tl) detector. The CE estimated using the neck part of BOMAB phantom is 50.2% lower in comparison with ANSI phantom. In rest of the studies FLUKA code is used for Monte Carlo simulations using ANSI/IAEA thyroid phantom. The simulation results are validated in static geometries with experimental CE and the differences are within 1.3%. It is observed that CE for pencil source distribution is 3.97% higher for (133)Ba in comparison with CE of (131)I source. Simulated CE for pencil source distribution is 4.7% lower in comparison with uniform source distribution in the volume of thyroid for (131)I. Since the radiation workers are of different physique; overlying tissue thickness (OTT) and neck-to-detector distance play an important role in the calculation of activity in thyroid. The CE decreases with increase in OTT and is found to be 5.5% lower if OTT is changed from 1.1 to 2 cm. Finally, the simulations are carried out to estimate the variation in CE due to variation in the neck-to-detector distance. The CE is 6.2% higher if the neck surface-to-detector distance is decreased from 21.4 to 20.4 cm and it goes on increasing up to 61.9% if the distance is decreased to 15.4 cm. In conclusion, the calibration of whole-body monitoring system for (131)I should be carried out with ANSI/IAEA thyroid phantom, the neck-to-detector distance controlled or the CE corrected for this, and the CE should be corrected for OTT.

  8. Fusion Plasma Theory project summaries

    SciTech Connect

    Not Available

    1993-10-01

    This Project Summary book is a published compilation consisting of short descriptions of each project supported by the Fusion Plasma Theory and Computing Group of the Advanced Physics and Technology Division of the Department of Energy, Office of Fusion Energy. The summaries contained in this volume were written by the individual contractors with minimal editing by the Office of Fusion Energy. Previous summaries were published in February of 1982 and December of 1987. The Plasma Theory program is responsible for the development of concepts and models that describe and predict the behavior of a magnetically confined plasma. Emphasis is given to the modelling and understanding of the processes controlling transport of energy and particles in a toroidal plasma and supporting the design of the International Thermonuclear Experimental Reactor (ITER). A tokamak transport initiative was begun in 1989 to improve understanding of how energy and particles are lost from the plasma by mechanisms that transport them across field lines. The Plasma Theory program has actively-participated in this initiative. Recently, increased attention has been given to issues of importance to the proposed Tokamak Physics Experiment (TPX). Particular attention has been paid to containment and thermalization of fast alpha particles produced in a burning fusion plasma as well as control of sawteeth, current drive, impurity control, and design of improved auxiliary heating. In addition, general models of plasma behavior are developed from physics features common to different confinement geometries. This work uses both analytical and numerical techniques. The Fusion Theory program supports research projects at US government laboratories, universities and industrial contractors. Its support of theoretical work at universities contributes to the office of Fusion Energy mission of training scientific manpower for the US Fusion Energy Program.

  9. Ultrastructural Analysis of Myoblast Fusion in Drosophila

    PubMed Central

    Zhang, Shiliang; Chen, Elizabeth H.

    2015-01-01

    Summary Myoblast fusion in Drosophila has become a powerful genetic system with which to unravel the mechanisms underlying cell fusion. The identification of important components of myoblast fusion by genetic analysis has led to a molecular pathway toward our understanding of this cellular process. In addition to the application of immunohistochemistry and live imaging techniques to visualize myoblast fusion at the light microscopic level, ultrastructural analysis using electron microscopy remains an indispensable tool to reveal fusion intermediates and specific membrane events at sites of fusion. In this chapter, we describe conventional chemical fixation and high-pressure freezing/freeze substitution methods for visualizing fusion intermediates during Drosophila myoblast fusion. Furthermore, we describe an immunoelectron microscopic method for localizing specific proteins relative to the fusion apparatus. PMID:18979250

  10. Kinetic advantage of controlled intermediate nuclear fusion

    SciTech Connect

    Guo Xiaoming

    2012-09-26

    The dominated process of controlled fusion is to let nuclei gain enough kinetic energy to overcome Coulomb barrier. As a result, a fusion scheme can consider two factors in its design: to increase kinetic energy of nuclei and to alter the Coulomb barrier. Cold Fusion and Hot fusion are all one-factor schemes while Intermediate Fusion is a twofactors scheme. This made CINF kinetically superior. Cold Fusion reduces deuteron-deuteron distance, addressing Coulomb barrier, and Hot Fusion heat up plasma into extreme high temperature, addressing kinetic energy. Without enough kinetic energy made Cold Fusion skeptical. Extreme high temperature made Hot Fusion very difficult to engineer. Because CIFN addresses both factors, CIFN is a more promising technique to be industrialized.

  11. Accelerators for Fusion Materials Testing

    NASA Astrophysics Data System (ADS)

    Knaster, Juan; Okumura, Yoshikazu

    Fusion materials research is a worldwide endeavor as old as the parallel one working toward the long term stable confinement of ignited plasma. In a fusion reactor, the preservation of the required minimum thermomechanical properties of the in-vessel components exposed to the severe irradiation and heat flux conditions is an indispensable factor for safe operation; it is also an essential goal for the economic viability of fusion. Energy from fusion power will be extracted from the 14 MeV neutron freed as a product of the deuterium-tritium fusion reactions; thus, this kinetic energy must be absorbed and efficiently evacuated and electricity eventually generated by the conventional methods of a thermal power plant. Worldwide technological efforts to understand the degradation of materials exposed to 14 MeV neutron fluxes >1018 m-2s-1, as expected in future fusion power plants, have been intense over the last four decades. Existing neutron sources can reach suitable dpa (“displacement-per-atom”, the figure of merit to assess materials degradation from being exposed to neutron irradiation), but the differences in the neutron spectrum of fission reactors and spallation sources do not allow one to unravel the physics and to anticipate the degradation of materials exposed to fusion neutrons. Fusion irradiation conditions can be achieved through Li (d, xn) nuclear reactions with suitable deuteron beam current and energy, and an adequate flowing lithium screen. This idea triggered in the late 1970s at Los Alamos National Laboratory (LANL) a campaign working toward the feasibility of continuous wave (CW) high current linacs framed by the Fusion Materials Irradiation Test (FMIT) project. These efforts continued with the Low Energy Demonstrating Accelerator (LEDA) (a validating prototype of the canceled Accelerator Production of Tritium (APT) project), which was proposed in 2002 to the fusion community as a 6.7MeV, 100mA CW beam injector for a Li (d, xn) source to bridge

  12. Accelerators for Fusion Materials Testing

    NASA Astrophysics Data System (ADS)

    Knaster, Juan; Okumura, Yoshikazu

    Fusion materials research is a worldwide endeavor as old as the parallel one working toward the long term stable confinement of ignited plasma. In a fusion reactor, the preservation of the required minimum thermomechanical properties of the in-vessel components exposed to the severe irradiation and heat flux conditions is an indispensable factor for safe operation; it is also an essential goal for the economic viability of fusion. Energy from fusion power will be extracted from the 14 MeV neutron freed as a product of the deuterium-tritium fusion reactions; thus, this kinetic energy must be absorbed and efficiently evacuated and electricity eventually generated by the conventional methods of a thermal power plant. Worldwide technological efforts to understand the degradation of materials exposed to 14 MeV neutron fluxes > 1018 m-2s-1, as expected in future fusion power plants, have been intense over the last four decades. Existing neutron sources can reach suitable dpa ("displacement-per-atom", the figure of merit to assess materials degradation from being exposed to neutron irradiation), but the differences in the neutron spectrum of fission reactors and spallation sources do not allow one to unravel the physics and to anticipate the degradation of materials exposed to fusion neutrons. Fusion irradiation conditions can be achieved through Li (d, xn) nuclear reactions with suitable deuteron beam current and energy, and an adequate flowing lithium screen. This idea triggered in the late 1970s at Los Alamos National Laboratory (LANL) a campaign working toward the feasibility of continuous wave (CW) high current linacs framed by the Fusion Materials Irradiation Test (FMIT) project. These efforts continued with the Low Energy Demonstrating Accelerator (LEDA) (a validating prototype of the canceled Accelerator Production of Tritium (APT) project), which was proposed in 2002 to the fusion community as a 6.7MeV, 100mA CW beam injector for a Li (d, xn) source to bridge

  13. Fusion reactions at low energy

    SciTech Connect

    Beckerman, M.

    1985-01-01

    Fusion measurement methods at low energies are briefly described, and experimental and theoretical fusion cross sections for /sup 58/Ni + /sup 58/Ni, /sup 58/Ni + /sup 64/Ni and /sup 64/Ni + /sup 64/Ni reactions are discussed. It is shown that quantal tunneling calculations do not describe the near- and sub-barrier behavior of the fusion data. Instead, the WKB predictions fall progressively further blow the experimental results as the energy is lowered. At far subbarrier energies the measured cross sections exceed the WKB predictions by more than three orders of magnitude. The unexpectedly strong dependence of the fusion probability upon the nuclear valence structure is illustrated and discussed. The relationship of channel coupling and quantal tunneling is discussed. In conclusion, it was established that atomic nuclei fuse far more readily at low energies that would be expected from quantal tunneling considerations alone. It was found that the behavior of the cross sections for fusion depends strongly upon the valence structure of the collision partners. This structural dependence extends from light 1p-shell systems to systems involving nearly 200 nucleons. These new phenomena may be viewed as characterizing the tunneling of a quantal system with many degrees of freedom. The failure of standard tunneling models may be understood as resulting from the ability of the dinuclear system to tunnel into the classically forbidden region by means of couplings to intrinsic degrees of freedom. 38 refs. (WHK)

  14. A Model for Membrane Fusion

    NASA Astrophysics Data System (ADS)

    Ngatchou, Annita

    2010-01-01

    Pheochromocytoma is a tumor of the adrenal gland which originates from chromaffin cells and is characterized by the secretion of excessive amounts of neurotransmitter which lead to high blood pressure and palpitations. Pheochromocytoma contain membrane bound granules that store neurotransmitter. The release of these stored molecules into the extracellular space occurs by fusion of the granule membrane with the cell plasma membrane, a process called exocytosis. The molecular mechanism of this membrane fusion is not well understood. It is proposed that the so called SNARE proteins [1] are the pillar of vesicle fusion as their cleavage by clostridial toxin notably, Botulinum neurotoxin and Tetanus toxin abrogate the secretion of neurotransmitter [2]. Here, I describe how physical principles are applied to a biological cell to explore the role of the vesicle SNARE protein synaptobrevin-2 in easing granule fusion. The data presented here suggest a paradigm according to which the movement of the C-terminal of synaptobrevin-2 disrupts the lipid bilayer to form a fusion pore through which molecules can exit.

  15. Marked disequilibrium between 234Th and 230Th of the 238U natural radioactive decay chain in IAEA reference materials n. 312, 313 and 314.

    PubMed

    Colaianni, A; D'Erasmo, G; Pantaleo, A; Schiavulli, L

    2011-02-01

    A new laboratory for the spectroscopy of natural radioactivity with a good energy resolution is presented. It consists of two distinct parts equipped, respectively, the first one with a HpGe γ-ray detector, whose setup has been already completed, and the second one with large area Silicon α-ray detectors and a radiochemical section for thin α-samples preparation, whose setup is yet in progress and will be the argument of a separate work. The γ-ray spectrometer was calibrated by means of IAEA Reference Materials n. 312, 313, 314 and 375. A large difference from the predictions of secular equilibrium emerged between the activities of (234)Th and (230)Th in Materials n. 312, 313 and 314.

  16. Proceedings of the Joint IAEA/CSNI Specialists` Meeting on Fracture Mechanics Verification by Large-Scale Testing held at Pollard Auditorium, Oak Ridge, Tennessee

    SciTech Connect

    Pugh, C.E.; Bass, B.R.; Keeney, J.A.

    1993-10-01

    This report contains 40 papers that were presented at the Joint IAEA/CSNI Specialists` Meeting Fracture Mechanics Verification by Large-Scale Testing held at the Pollard Auditorium, Oak Ridge, Tennessee, during the week of October 26--29, 1992. The papers are printed in the order of their presentation in each session and describe recent large-scale fracture (brittle and/or ductile) experiments, analyses of these experiments, and comparisons between predictions and experimental results. The goal of the meeting was to allow international experts to examine the fracture behavior of various materials and structures under conditions relevant to nuclear reactor components and operating environments. The emphasis was on the ability of various fracture models and analysis methods to predict the wide range of experimental data now available. The individual papers have been cataloged separately.

  17. Status of IAEA CRP on Study of Process-Losses in Separation Processes in Partitioning and Transmutation Systems in View of Minimizing Long-Term Environmental Impacts

    SciTech Connect

    Ahn, J.; Bimova, K.C.; Bychkov, A.; Kormilitsyn, M.; Inoue, T.; Koch, L.; Nagarajan, K.; Nawada, H.; Ye, Y.; Yoo, J.H.

    2007-07-01

    Coordinated Research Project (CRP) was initiated in 2002 by IAEA to enable Member States in developing methodologies for reducing radio-toxic discharge to the environment from nuclear fuel cycle activities and in paving the way for sustainability of nuclear energy. In the past three Research Coordination Meetings (RCM), the following areas of research were examined upon: (1)Basic studies to compare dry partitioning process with aqueous partitioning process; (2)Defining proliferation resistance attributes of partitioning processes; (3) Advanced characterization methods for actinides for measuring the possible material holdup;( 4)Minimization of actinides losses in the waste fraction from the partitioning process;(5)Establishment of separation criteria of partitioning process to minimize environmental impact; and (6)Defining environmental impact associated with partitioning processes. The final TECDOC is currently being prepared to summarize the activities of this CRP. (authors)

  18. Membrane fusion in muscle development and repair

    PubMed Central

    Demonbreun, Alexis R.; Biersmith, Bridget H.

    2015-01-01

    Mature skeletal muscle forms from the fusion of skeletal muscle precursor cells, myoblasts. Myoblasts fuse to other myoblasts to generate multinucleate myotubes during myogenesis, and myoblasts also fuse to other myotubes during muscle growth and repair. Proteins within myoblasts and myotubes regulate complex processes such as elongation, migration, cell adherence, cytoskeletal reorganization, membrane coalescence, and ultimately fusion. Recent studies have identified cell surface proteins, intracellular proteins, and extracellular signaling molecules required for the proper fusion of muscle. Many proteins that actively participate in myoblast fusion also coordinate membrane repair. Here we will review mammalian membrane fusion with specific attention to proteins that mediate myoblast fusion and muscle repair. PMID:26537430

  19. The Path to Magnetic Fusion Energy

    SciTech Connect

    Prager, Stewart

    2011-05-04

    When the possibility of fusion as an energy source for electricity generation was realized in the 1950s, understanding of the plasma state was primitive. The fusion goal has been paced by, and has stimulated, the development of plasma physics. Our understanding of complex, nonlinear processes in plasmas is now mature. We can routinely produce and manipulate 100 million degree plasmas with remarkable finesse, and we can identify a path to commercial fusion power. The international experiment, ITER, will create a burning (self-sustained) plasma and produce 500 MW of thermal fusion power. This talk will summarize the progress in fusion research to date, and the remaining steps to fusion power.

  20. A systematic study on the extractability of arsenic species from algal certified reference material IAEA-140/TM (Fucus sp., Sea Plant Homogenate) using methanol/water extractant mixtures.

    PubMed

    van Elteren, Johannes Teun; Slejkovec, Zdenka; Kahn, Markus; Goessler, Walter

    2007-02-28

    Using methanol/water mixtures (from pure water to pure methanol), with different desorption and solubility parameters, and varying extractant volume to algal mass (V/m) ratios, the extractability of arsenic species from CRM IAEA-140/TM was investigated. A linear sorption isotherm-based model was developed to process the data obtained with variable volume extraction, allowing the unambiguous deduction of the maximal extractable species concentrations under the specific extraction conditions, even for more stable species. The maximal extractable arsenic fraction ranged from 41 to 68% of the total arsenic concentration in CRM IAEA-140/TM, depending on the extractant composition, with pure methanol giving the lowest extraction yield and pure water giving erratic extractability (probably due to bad wettability). The main arsenic species quantified in the methanol/water extracts were arsenosugars, with arsenosugars 1 (glycerol arsenosugar), 3 (sulfonate arsenosugar) and 4 (sulfate arsenosugar) making up ca. 90% of the maximal extractable arsenic. The rest accounts for DMA (dimethylarsinate), arsenosugar 2 (phosphate arsenosugar) and As(V). There is no clear extraction pattern emerging from the data although it may be seen that extraction of more polar species (e.g. arsenosugar 1) is favoured in pure methanol and less polar more ionic species (e.g. arsenosugar 2 and As(V)) in methanol extractants with a higher water percentage. The precise and highly accurate data may be used for quality control purposes under strictly followed extraction conditions since the extraction is operationally defined. Additionally, the variable volume extraction methodology presented may be applied to other elemental species in other matrices using other extractants. Although this approach does not maximise the absolute extractability but only that which is extractant-specific, experimentators are forewarned that in most cases only a fingerprint of the extractant-specific species is produced

  1. (Meeting on fusion reactor materials)

    SciTech Connect

    Jones, R.H. ); Klueh, R.L.; Rowcliffe, A.F.; Wiffen, F.W. ); Loomis, B.A. )

    1990-11-01

    During his visit to the KfK, Karlsruhe, F. W. Wiffen attended the IEA 12th Working Group Meeting on Fusion Reactor Materials. Plans were made for a low-activation materials workshop at Culham, UK, for April 1991, a data base workshop in Europe for June 1991, and a molecular dynamics workshop in the United States in 1991. At the 11th IEA Executive Committee on Fusion Materials, discussions centered on the recent FPAC and Colombo panel review in the United States and EC, respectively. The Committee also reviewed recent progress toward a neutron source in the United States (CWDD) and in Japan (ESNIT). A meeting with D. R. Harries (consultant to J. Darvas) yielded a useful overview of the EC technology program for fusion. Of particular interest to the US program is a strong effort on a conventional ferritic/martensitic steel for fist wall/blanket operation beyond NET/ITER.

  2. Fusion power for space propulsion.

    NASA Technical Reports Server (NTRS)

    Roth, R.; Rayle, W.; Reinmann, J.

    1972-01-01

    Principles of operation, interplanetary orbit-to-orbit mission capabilities, technical problems, and environmental safeguards are examined for thermonuclear fusion propulsion systems. Two systems examined include (1) a fusion-electric concept in which kinetic energy of charged particles from the plasma is converted into electric power (for accelerating the propellant in an electrostatic thrustor) by the van de Graaf generator principle and (2) the direct fusion rocket in which energetic plasma lost from the reactor has a suitable amount of added propellant to obtain the optimum exhaust velocity. The deuterium-tritium and the deuterium/helium-3 reactions are considered as suitable candidates, and attention is given to problems of cryogenic refrigeration systems, magnet shielding, and high-energy particle extraction and guidance.

  3. Superconducting magnets for fusion applications

    SciTech Connect

    Henning, C.D.

    1987-07-02

    Fusion magnet technology has made spectacular advances in the past decade; to wit, the Mirror Fusion Test Facility and the Large Coil Project. However, further advances are still required for advanced economical fusion reactors. Higher fields to 14 T and radiation-hardened superconductors and insulators will be necessary. Coupled with high rates of nuclear heating and pulsed losses, the next-generation magnets will need still higher current density, better stability and quench protection. Cable-in-conduit conductors coupled with polyimide insulations and better steels seem to be the appropriate path. Neutron fluences up to 10/sup 19/ neutrons/cm/sup 2/ in niobium tin are achievable. In the future, other amorphous superconductors could raise these limits further to extend reactor life or decrease the neutron shielding and corresponding reactor size.

  4. Tissue fusion over nonadhering surfaces

    PubMed Central

    Nier, Vincent; Deforet, Maxime; Duclos, Guillaume; Yevick, Hannah G.; Cochet-Escartin, Olivier; Marcq, Philippe; Silberzan, Pascal

    2015-01-01

    Tissue fusion eliminates physical voids in a tissue to form a continuous structure and is central to many processes in development and repair. Fusion events in vivo, particularly in embryonic development, often involve the purse-string contraction of a pluricellular actomyosin cable at the free edge. However, in vitro, adhesion of the cells to their substrate favors a closure mechanism mediated by lamellipodial protrusions, which has prevented a systematic study of the purse-string mechanism. Here, we show that monolayers can cover well-controlled mesoscopic nonadherent areas much larger than a cell size by purse-string closure and that active epithelial fluctuations are required for this process. We have formulated a simple stochastic model that includes purse-string contractility, tissue fluctuations, and effective friction to qualitatively and quantitatively account for the dynamics of closure. Our data suggest that, in vivo, tissue fusion adapts to the local environment by coordinating lamellipodial protrusions and purse-string contractions. PMID:26199417

  5. Laser fusion experiments at LLL

    SciTech Connect

    Ahlstrom, H.G.

    1980-06-16

    These notes present the experimental basis and status for laser fusion as developed at LLL. Two other chapters, one authored by K.A. Brueckner and the other by C. Max, present the theoretical implosion physics and laser plasma interaction physics. The notes consist of six sections. The first is an introductory section which provides some of the history of inertial fusion and a simple explanation of the concepts involved. The second section presents an extensive discussion of diagnostic instrumentation used in the LLL Laser Fusion Program. The third section is a presentation of laser facilities and capabilities at LLL. The purpose here is to define capability, not to derive how it was obtained. The fourth and fifth sections present the experimental data on laser-plasma interaction and implosion physics. The last chapter is a short projection of the future.

  6. Fusion Breeder Program interim report

    SciTech Connect

    Moir, R.; Lee, J.D.; Neef, W.

    1982-06-11

    This interim report for the FY82 Fusion Breeder Program covers work performed during the scoping phase of the study, December, 1981-February 1982. The goals for the FY82 study are the identification and development of a reference blanket concept using the fission suppression concept and the definition of a development plan to further the fusion breeder application. The context of the study is the tandem mirror reactor, but emphasis is placed upon blanket engineering. A tokamak driver and blanket concept will be selected and studied in more detail during FY83.

  7. Percutaneous Hindfoot and Midfoot Fusion.

    PubMed

    Bauer, Thomas

    2016-09-01

    Hindfoot and midfoot fusions can be performed with percutaneous techniques. Preliminary results of these procedures are encouraging because they provide similar results than those obtained with open techniques with less morbidity and quick recovery. The best indications are probably fusions for mild-to-moderate reducible hindfoot and midfoot deformities in fragile patients with general or local bad conditions. The main limit is linked to the surgeon's experience in percutaneous foot surgery because a learning curve with the specific tools is necessary before doing these procedures.

  8. Method for vacuum fusion bonding

    DOEpatents

    Ackler, Harold D.; Swierkowski, Stefan P.; Tarte, Lisa A.; Hicks, Randall K.

    2001-01-01

    An improved vacuum fusion bonding structure and process for aligned bonding of large area glass plates, patterned with microchannels and access holes and slots, for elevated glass fusion temperatures. Vacuum pumpout of all components is through the bottom platform which yields an untouched, defect free top surface which greatly improves optical access through this smooth surface. Also, a completely non-adherent interlayer, such as graphite, with alignment and location features is located between the main steel platform and the glass plate pair, which makes large improvements in quality, yield, and ease of use, and enables aligned bonding of very large glass structures.

  9. Z-Pinch Fusion Propulsion

    NASA Technical Reports Server (NTRS)

    Miernik, Janie

    2011-01-01

    Fusion-based nuclear propulsion has the potential to enable fast interplanetary transportation. Shorter trips are better for humans in the harmful radiation environment of deep space. Nuclear propulsion and power plants can enable high Ispand payload mass fractions because they require less fuel mass. Fusion energy research has characterized the Z-Pinch dense plasma focus method. (1) Lightning is form of pinched plasma electrical discharge phenomena. (2) Wire array Z-Pinch experiments are commonly studied and nuclear power plant configurations have been proposed. (3) Used in the field of Nuclear Weapons Effects (NWE) testing in the defense industry, nuclear weapon x-rays are simulated through Z-Pinch phenomena.

  10. The first fusion reactor: ITER

    NASA Astrophysics Data System (ADS)

    Campbell, D. J.

    2016-11-01

    Established by the signature of the ITER Agreement in November 2006 and currently under construction at St Paul-lez-Durance in southern France, the ITER project [1,2] involves the European Union (including Switzerland), China, India, Japan, the Russian Federation, South Korea and the United States. ITER (`the way' in Latin) is a critical step in the development of fusion energy. Its role is to provide an integrated demonstration of the physics and technology required for a fusion power plant based on magnetic confinement.

  11. Fusion bonding and alignment fixture

    DOEpatents

    Ackler, Harold D.; Swierkowski, Stefan P.; Tarte, Lisa A.; Hicks, Randall K.

    2000-01-01

    An improved vacuum fusion bonding structure and process for aligned bonding of large area glass plates, patterned with microchannels and access holes and slots, for elevated glass fusion temperatures. Vacuum pumpout of all the components is through the bottom platform which yields an untouched, defect free top surface which greatly improves optical access through this smooth surface. Also, a completely non-adherent interlayer, such as graphite, with alignment and location features is located between the main steel platform and the glass plate pair, which makes large improvements in quality, yield, and ease of use, and enables aligned bonding of very large glass structures.

  12. Plasma physics goes beyond fusion

    NASA Astrophysics Data System (ADS)

    Franklin, Raoul

    2008-11-01

    I was interested to read the fusion supplement published with the October issue of Physics World. However, in asserting that fusion created the need to recognize plasma physics as a separate branch of the subject, Stephen Cowley, the new director of the United Kingdom Atomic Energy Authority, was not quite correct. In fact, the word "plasma" was appropriated from the Greek by the chemical physicist (and later Nobel laureate) Irving Langmuir in 1928. It was used to describe the positive column of a gas discharge, which was then the subject of research into better lighting sources and advertising displays, as well as the underlying science.

  13. Equivalence of measurement space solution data fusion and complete fusion

    NASA Astrophysics Data System (ADS)

    Ceccherini, Simone

    2016-10-01

    Many observation systems are operating on space-borne and airborne platforms, as well as from ground-based stations, providing measurements of vertical profiles of atmospheric parameters. When independent measurements of the same profile are available data fusion methods can be used to combine them and exploit all the available information for a more comprehensive and accurate description of the atmospheric state. Several data fusion methods can be used. Among the others, both the measurement space solution data fusion method and the complete fusion method have the remarkable properties of using all the acquired information and of providing results that are independent from a priori information used in the individual retrievals. For this reason, though the two methods use two completely different procedures, it is reasonable to expect that they give the same results and in this paper the rigorous proof of the equivalence of the two methods is given. Therefore, the choice between them is only driven by the advantages of the different implementations.

  14. A Plan for the Development of Fusion Energy. Final Report to Fusion Energy Sciences Advisory Committee, Fusion Development Path Panel

    SciTech Connect

    None, None

    2003-03-05

    This report presents a plan for the deployment of a fusion demonstration power plant within 35 years, leading to commercial application of fusion energy by mid-century. The plan is derived from the necessary features of a demonstration fusion power plant and from the time scale defined by President Bush. It identifies critical milestones, key decision points, needed major facilities and required budgets.

  15. Mechanisms of influenza viral membrane fusion.

    PubMed

    Blijleven, Jelle S; Boonstra, Sander; Onck, Patrick R; van der Giessen, Erik; van Oijen, Antoine M

    2016-12-01

    Influenza viral particles are enveloped by a lipid bilayer. A major step in infection is fusion of the viral and host cellular membranes, a process with large kinetic barriers. Influenza membrane fusion is catalyzed by hemagglutinin (HA), a class I viral fusion protein activated by low pH. The exact nature of the HA conformational changes that deliver the energy required for fusion remains poorly understood. This review summarizes our current knowledge of HA structure and dynamics, describes recent single-particle experiments and modeling studies, and discusses their role in understanding how multiple HAs mediate fusion. These approaches provide a mechanistic picture in which HAs independently and stochastically insert into the target membrane, forming a cluster of HAs that is collectively able to overcome the barrier to membrane fusion. The new experimental and modeling approaches described in this review hold promise for a more complete understanding of other viral fusion systems and the protein systems responsible for cellular fusion.

  16. Collescipoli - An unusual fusion crust glass. [chondrite

    NASA Technical Reports Server (NTRS)

    Nozette, S.

    1979-01-01

    An electron microprobe study was conducted on glass fragments taken from the fusion crust and an internal glass-lined vein in the H-5 chondrite Collescipoli. Microprobe analyses of the glasses revealed an unusual fusion crust composition, and analyses of glass from inside the meteorite showed compositions expected for a melt of an H-group chondrite. Studies of fusion crusts by previous workers, e.g., Krinov and Ramdohr, showed that fusion crusts contain large amounts of magnetite and other oxidized minerals. The Collescipoli fusion crusts do contain these minerals, but they also contain relatively large amounts of reduced metal, sulphide, and a sodium-rich glass. This study seems to indicate that Collescipoli preserved an early type of fusion crust. Oxidation was incomplete in the fusion crust melt that drained into a crack. From this study it is concluded that fusion crust formation does not invariably result in complete oxidation of metal and sulphide phases.

  17. Cold fusion catalyzed by muons and electrons

    SciTech Connect

    Kulsrud, R.M.

    1990-10-01

    Two alternative methods have been suggested to produce fusion power at low temperature. The first, muon catalyzed fusion or MCF, uses muons to spontaneously catalyze fusion through the muon mesomolecule formation. Unfortunately, this method fails to generate enough fusion energy to supply the muons, by a factor of about ten. The physics of MCF is discussed, and a possible approach to increasing the number of MCF fusions generated by each muon is mentioned. The second method, which has become known as Cold Fusion,'' involves catalysis by electrons in electrolytic cells. The physics of this process, if it exists, is more mysterious than MCF. However, it now appears to be an artifact, the claims for its reality resting largely on experimental errors occurring in rather delicate experiments. However, a very low level of such fusion claimed by Jones may be real. Experiments in cold fusion will also be discussed.

  18. Advanced Concepts: Aneutronic Fusion Power and Propulsion

    NASA Technical Reports Server (NTRS)

    Chapman, John J.

    2012-01-01

    Aneutronic Fusion for In-Space thrust, power. Clean energy & potential nuclear gains. Fusion plant concepts, potential to use advanced fuels. Methods to harness ionic momentum for high Isp thrust plus direct power conversion into electricity will be presented.

  19. Z-Pinch Fusion for Energy Applications

    SciTech Connect

    SPIELMAN,RICK B.

    2000-01-01

    Z pinches, the oldest fusion concept, have recently been revisited in light of significant advances in the fields of plasma physics and pulsed power engineering. The possibility exists for z-pinch fusion to play a role in commercial energy applications. We report on work to develop z-pinch fusion concepts, the result of an extensive literature search, and the output for a congressionally-mandated workshop on fusion energy held in Snowmass, Co July 11-23,1999.

  20. Exo-endo cellulase fusion protein

    SciTech Connect

    Bower, Benjamin S; Larenas, Edmund A; Mitchinson, Colin

    2012-01-17

    The present invention relates to a heterologous exo-endo cellulase fusion construct, which encodes a fusion protein having cellulolytic activity comprising a catalytic domain derived from a fungal exo-cellobiohydrolase and a catalytic domain derived from an endoglucanase. The invention also relates to vectors and fungal host cells comprising the heterologous exo-endo cellulase fusion construct as well as methods for producing a cellulase fusion protein and enzymatic cellulase compositions.

  1. A review of data fusion techniques.

    PubMed

    Castanedo, Federico

    2013-01-01

    The integration of data and knowledge from several sources is known as data fusion. This paper summarizes the state of the data fusion field and describes the most relevant studies. We first enumerate and explain different classification schemes for data fusion. Then, the most common algorithms are reviewed. These methods and algorithms are presented using three different categories: (i) data association, (ii) state estimation, and (iii) decision fusion.

  2. A Review of Data Fusion Techniques

    PubMed Central

    2013-01-01

    The integration of data and knowledge from several sources is known as data fusion. This paper summarizes the state of the data fusion field and describes the most relevant studies. We first enumerate and explain different classification schemes for data fusion. Then, the most common algorithms are reviewed. These methods and algorithms are presented using three different categories: (i) data association, (ii) state estimation, and (iii) decision fusion. PMID:24288502

  3. Proton Collimators for Fusion Reactors

    NASA Technical Reports Server (NTRS)

    Miley, George H.; Momota, Hiromu

    2003-01-01

    Proton collimators have been proposed for incorporation into inertial-electrostatic-confinement (IEC) fusion reactors. Such reactors have been envisioned as thrusters and sources of electric power for spacecraft and as sources of energetic protons in commercial ion-beam applications.

  4. Magnetic Inertial Confinement Fusion (MICF)

    NASA Astrophysics Data System (ADS)

    Miao, Feng; Zheng, Xianjun; Deng, Baiquan; Liu, Wei; Ou, Wei; Huang, Yi

    2016-11-01

    Based on the similarity in models of the early Sun and the 3-D common focal region of the micro-pinch in X-pinch experiments, a novel hybrid fusion configuration by continuous focusing of multiple Z-pinched plasma beams on spatially symmetric plasma is proposed. By replacing gravity with Lorentz force with subsequent centripetal spherical pinch, the beam-target fusion reactivity is enhanced in a quasi-spherical converging region, thus achieving MICF. An assessment, presented here, suggests that a practical fusion power source could be achieved using deuterium alone. Plasma instabilities can be suppressed by fast rotation resulting from an asymmetric tangential torsion in the spherical focal region of this configuration. Mathematical equivalence with the Sun allows the development of appropriate equations for the focal region of MICF, which are solved numerically to provide density, temperature and pressure distributions that produce net fusion energy output. An analysis of MICF physics and a preliminary experimental demonstration of a single beam are also carried out. supported by National Natural Science Foundation of China (Nos. 11374217 and 11176020)

  5. Advanced algorithms for distributed fusion

    NASA Astrophysics Data System (ADS)

    Gelfand, A.; Smith, C.; Colony, M.; Bowman, C.; Pei, R.; Huynh, T.; Brown, C.

    2008-03-01

    The US Military has been undergoing a radical transition from a traditional "platform-centric" force to one capable of performing in a "Network-Centric" environment. This transformation will place all of the data needed to efficiently meet tactical and strategic goals at the warfighter's fingertips. With access to this information, the challenge of fusing data from across the batttlespace into an operational picture for real-time Situational Awareness emerges. In such an environment, centralized fusion approaches will have limited application due to the constraints of real-time communications networks and computational resources. To overcome these limitations, we are developing a formalized architecture for fusion and track adjudication that allows the distribution of fusion processes over a dynamically created and managed information network. This network will support the incorporation and utilization of low level tracking information within the Army Distributed Common Ground System (DCGS-A) or Future Combat System (FCS). The framework is based on Bowman's Dual Node Network (DNN) architecture that utilizes a distributed network of interlaced fusion and track adjudication nodes to build and maintain a globally consistent picture across all assets.

  6. Prospects for fusion neutron NPLs

    SciTech Connect

    Petra, M.; Miley, G.H.; Batyrbekov, E.; Jassby, D.L.; McArthur, D.

    1996-05-01

    To date, nuclear pumped lasers (NPLs) have been driven by neutrons from pulsed research fission reactors. However, future applications using either a Magnetic Confinement Fusion (MCF) neutron source or an Inertial Confinement Fusion (ICF) source appear attractive. One unique combination proposed earlier would use a neutron feedback NPL driver in an ICF power plant. 14-MeV D-T neutrons (and 2.5-MeV D-D neutrons) provide a unique opportunity for a neutron recoil pumped NPL. Alternatively, these neutrons can be thermalized to provide thermal-neutron induced reactions for pumping. Initial experience with a fusion-pumped NPL can possibly be obtained using the D-T burn experiments in progress/planning at the Tokamak Fusion Test Reactor (TFTR) and Joint European Torus (JET) tokamak devices or at the planned National Ignition Facility (NIF) high-gain ICF target experimental facility. With neutron fluxes presently available, peak thermalized fluxes at a test laser in the shield region could exceed 10{sup 14} n/cm{sup 2}/sec. Several low-threshold NPLs might be utilized in such an experiment, including the He-Ne-H{sub 2} NPL and the Ar-Xe NPL. Experimental set-ups for both the tokamak and the NIF will be described. {copyright} {ital 1996 American Institute of Physics.}

  7. Seismic data fusion anomaly detection

    NASA Astrophysics Data System (ADS)

    Harrity, Kyle; Blasch, Erik; Alford, Mark; Ezekiel, Soundararajan; Ferris, David

    2014-06-01

    Detecting anomalies in non-stationary signals has valuable applications in many fields including medicine and meteorology. These include uses such as identifying possible heart conditions from an Electrocardiography (ECG) signals or predicting earthquakes via seismographic data. Over the many choices of anomaly detection algorithms, it is important to compare possible methods. In this paper, we examine and compare two approaches to anomaly detection and see how data fusion methods may improve performance. The first approach involves using an artificial neural network (ANN) to detect anomalies in a wavelet de-noised signal. The other method uses a perspective neural network (PNN) to analyze an arbitrary number of "perspectives" or transformations of the observed signal for anomalies. Possible perspectives may include wavelet de-noising, Fourier transform, peak-filtering, etc.. In order to evaluate these techniques via signal fusion metrics, we must apply signal preprocessing techniques such as de-noising methods to the original signal and then use a neural network to find anomalies in the generated signal. From this secondary result it is possible to use data fusion techniques that can be evaluated via existing data fusion metrics for single and multiple perspectives. The result will show which anomaly detection method, according to the metrics, is better suited overall for anomaly detection applications. The method used in this study could be applied to compare other signal processing algorithms.

  8. Inertial confinement fusion (ICF) review

    SciTech Connect

    Hammer, D.; Dyson, F.; Fortson, N.; Novick, B.; Panofsky, W.; Rosenbluth, M.; Treiman, S.; York, H.

    1996-03-01

    During its 1996 winter study JASON reviewed the DOE Inertial Confinement Fusion (ICF) program. This included the National Ignition Facility (NIF) and proposed studies. The result of the review was to comment on the role of the ICF program in support of the DOE Science Based Stockpile Stewardship program.

  9. Tritium breeding in fusion reactors

    SciTech Connect

    Abdou, M.A.

    1982-10-01

    Key technological problems that influence tritium breeding in fusion blankets are reviewed. The breeding potential of candidate materials is evaluated and compared to the tritium breeding requirements. The sensitivity of tritium breeding to design and nuclear data parameters is reviewed. A framework for an integrated approach to improve tritium breeding prediction is discussed with emphasis on nuclear data requirements.

  10. Nuclear data requirements for fusion reactor nucleonics

    SciTech Connect

    Bhat, M.R.; Abdou, M.A.

    1980-01-01

    Nuclear data requirements for fusion reactor nucleonics are reviewed and the present status of data are assessed. The discussion is divided into broad categories dealing with data for Fusion Materials Irradiation Test Facility (FMIT), D-T Fusion Reactors, Alternate Fuel Cycles and the Evaluated Data Files that are available or would be available in the near future.

  11. Fusion probability in heavy nuclei

    NASA Astrophysics Data System (ADS)

    Banerjee, Tathagata; Nath, S.; Pal, Santanu

    2015-03-01

    Background: Fusion between two massive nuclei is a very complex process and is characterized by three stages: (a) capture inside the potential barrier, (b) formation of an equilibrated compound nucleus (CN), and (c) statistical decay of the CN leading to a cold evaporation residue (ER) or fission. The second stage is the least understood of the three and is the most crucial in predicting yield of superheavy elements (SHE) formed in complete fusion reactions. Purpose: A systematic study of average fusion probability, , is undertaken to obtain a better understanding of its dependence on various reaction parameters. The study may also help to clearly demarcate onset of non-CN fission (NCNF), which causes fusion probability, PCN, to deviate from unity. Method: ER excitation functions for 52 reactions leading to CN in the mass region 170-220, which are available in the literature, have been compared with statistical model (SM) calculations. Capture cross sections have been obtained from a coupled-channels code. In the SM, shell corrections in both the level density and the fission barrier have been included. for these reactions has been extracted by comparing experimental and theoretical ER excitation functions in the energy range ˜5 %-35% above the potential barrier, where known effects of nuclear structure are insignificant. Results: has been shown to vary with entrance channel mass asymmetry, η (or charge product, ZpZt ), as well as with fissility of the CN, χCN. No parameter has been found to be adequate as a single scaling variable to determine . Approximate boundaries have been obtained from where starts deviating from unity. Conclusions: This study quite clearly reveals the limits of applicability of the SM in interpreting experimental observables from fusion reactions involving two massive nuclei. Deviation of from unity marks the beginning of the domain of dynamical models of fusion. Availability of precise ER cross

  12. MAD for visual tracker fusion

    NASA Astrophysics Data System (ADS)

    Becker, Stefan; Krah, Sebastian B.; Hübner, Wolfgang; Arens, Michael

    2016-10-01

    Existing tracking methods vary strongly in their approach and therefore have different strengths and weaknesses. For example, a single tracking algorithm may be good at handling variations in illumination, but does not cope well with deformation. Hence, their failures can occur on entirely different time intervals on the same sequence. One possible solution for overcoming limitations of a single tracker and for benefitting from individual strengths, is to run a set of tracking algorithms in parallel and fuse their outputs. But in general, tracking algorithms are not designed to receive feedback from a higher level fusion strategy or require a high degree of integration between individual levels. Towards this end, we introduce a fusion strategy serving the purpose of online single object tracking, for which no knowledge about individual tracker characteristics is needed. The key idea is to combine several independent and heterogeneous tracking approaches and to robustly identify an outlier subset based on the "Median Absolute Deviations" (MAD) measure. The MAD fusion strategy is very generic and only requires frame-based object bounding boxes as input. Thus, it can work with arbitrary tracking algorithms. Furthermore, the MAD fusion strategy can also be applied for combining several instances of the same tracker to form a more robust ensemble for tracking an object. The evaluation is done on public available datasets. With a set of heterogeneous, commonly used trackers we show that the proposed MAD fusion strategy improves the tracking results in comparison to a classical combination of parallel trackers and that the tracker ensemble helps to deal with the initialization uncertainty of a single tracker.

  13. Fusion safety regulations in the United States: Progress and trends

    SciTech Connect

    DeLooper, J.

    1994-07-01

    This paper explores the issue of regulations as they apply to current and future fusion experimental machines. It addresses fusion regulatory issues, current regulations used for fusion, the Tokamak Fusion Test Reactor experience with regulations, and future regulations to achieve fusion`s safety and environmental potential.

  14. Magnetized Target Fusion: Prospects for Low-Cost Fusion Energy

    NASA Technical Reports Server (NTRS)

    Siemon, Richard E.; Turchi, Peter J.; Barnes, Daniel C.; Degnan, James; Parks, Paul; Ryutov, Dmitri D.; Thio, Y. C. Francis; Schafer, Charles (Technical Monitor)

    2001-01-01

    Magnetized Target Fusion (MTF) has attracted renewed interest in recent years because it has the potential to resolve one of the major problems with conventional fusion energy research - the high cost of facilities to do experiments and in general develop practical fusion energy. The requirement for costly facilities can be traced to fundamental constraints. The Lawson condition implies large system size in the case of conventional magnetic confinement, or large heating power in the case of conventional inertial confinement. The MTF approach is to use much higher fuel density than with conventional magnetic confinement (corresponding to megabar pressures), which results in a much-reduced system size to achieve Lawson conditions. Intrinsically the system must be pulsed because the pressures exceed the strength of any known material. To facilitate heating the fuel (or "target") to thermonuclear conditions with a high-power high-intensity source of energy, magnetic fields are used to insulate the high-pressure fuel from material surroundings (thus "magnetized target"). Because of magnetic insulation, the required heating power intensity is reduced by many orders of magnitude compared to conventional inertial fusion, even with relatively poor energy confinement in the magnetic field, such as that characterized by Bohm diffusion. In this paper we show semi-quantitatively why MTF-should allow fusion energy production without costly facilities within the same generally accepted physical constraints used for conventional magnetic and inertial fusion. We also briefly discuss potential applications of this technology ranging from nuclear rockets for space propulsion to a practical commercial energy system. Finally, we report on the exploratory research underway, and the interesting physics issues that arise in the MTF regime of parameters. Experiments at Los Alamos are focused on formation of a suitable plasma target for compression, utilizing the knowledge base for compact

  15. Fusion - An energy source for synthetic fuels

    NASA Astrophysics Data System (ADS)

    Fillo, J. A.; Powell, J.; Steinberg, M.

    1980-05-01

    An important first step in the synthesis of liquid and gaseous fuels is the production of hydrogen. Thermonuclear fusion offers an inexhaustible source of energy for the production of hydrogen from water. Depending on design, electric generation efficiencies of 40 to 60% and hydrogen production efficiencies by high temperature electrolysis of 50 to 70% are projected for fusion reactors using high temperature blankets. Fusion/coal symbiotic systems appear economically promising for the first generation of commercial fusion synfuels plants. In the long term, there could be a gradual transition to an inexhaustible energy system based solely on fusion.

  16. Mechanisms of myoblast fusion during muscle development

    PubMed Central

    Kim, Ji Hoon; Jin, Peng; Duan, Rui; Chen, Elizabeth H.

    2015-01-01

    The development and regeneration of skeletal muscles require the fusion of mononulceated muscle cells to form multinucleated, contractile muscle fibers. Studies using a simple genetic model, Drosophila melanogaster, have discovered many evolutionarily conserved fusion-promoting factors in vivo. Recent work in zebrafish and mouse also identified several vertebrate-specific factors required for myoblast fusion. Here, we integrate progress in multiple in vivo systems and highlight conceptual advance in understanding how muscle cell membranes are brought together for fusion. We focus on the molecular machinery at the fusogenic synapse and present a three-step model to describe the molecular and cellular events leading to fusion pore formation. PMID:25989064

  17. Henipavirus membrane fusion and viral entry.

    PubMed

    Aguilar, Hector C; Iorio, Ronald M

    2012-01-01

    Nipah (NiV) and Hendra (HeV) viruses cause cell-cell fusion (syncytia) in brain, lung, heart, and kidney tissues, leading to encephalitis, pneumonia, and often death. Membrane fusion is essential to both viral entry and virus-induced cell-cell fusion, a hallmark of henipavirus infections. Elucidiation of the mechanism(s) of membrane fusion is critical to understanding henipavirus pathobiology and has the potential to identify novel strategies for the development of antiviral therapeutic agents. Henipavirus membrane fusion requires the coordinated actions of the viral attachment (G) and fusion (F) glycoproteins. Current henipavirus fusion models posit that attachment of NiV or HeV G to its cell surface receptors releases F from its metastable pre-fusion conformation to mediate membrane fusion. The identification of ephrinB2 and ephrinB3 as henipavirus receptors has paved the way for recent advances in our understanding of henipavirus membrane fusion. These advances highlight mechanistic similarities and differences between membrane fusion for the henipavirus and other genera within the Paramyxoviridae family. Here, we review these mechanisms and the current gaps in our knowledge in the field.

  18. Fusion technologies for Laser Inertial Fusion Energy (LIFE)

    NASA Astrophysics Data System (ADS)

    Kramer, K. J.; Latkowski, J. F.; Abbott, R. P.; Anklam, T. P.; Dunne, A. M.; El-Dasher, B. S.; Flowers, D. L.; Fluss, M. J.; Lafuente, A.; Loosmore, G. A.; Morris, K. R.; Moses, E.; Reyes, S.

    2013-11-01

    The Laser Inertial Fusion-based Energy (LIFE) engine design builds upon on going progress at the National Ignition Facility (NIF) and offers a near-term pathway to commercial fusion. Fusion technologies that are critical to success are reflected in the design of the first wall, blanket and tritium separation subsystems. The present work describes the LIFE engine-related components and technologies. LIFE utilizes a thermally robust indirect-drive target and a chamber fill gas. Coolant selection and a large chamber solid-angle coverage provide ample tritium breeding margin and high blanket gain. Target material selection eliminates the need for aggressive chamber clearing, while enabling recycling. Demonstrated tritium separation and storage technologies limit the site tritium inventory to attractive levels. These key technologies, along with the maintenance and advanced materials qualification program have been integrated into the LIFE delivery plan. This describes the development of components and subsystems, through prototyping and integration into a First Of A Kind power plant. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

  19. Acoustically Driven Magnetized Target Fusion At General Fusion: An Overview

    NASA Astrophysics Data System (ADS)

    O'Shea, Peter; Laberge, M.; Donaldson, M.; Delage, M.; the Fusion Team, General

    2016-10-01

    Magnetized Target Fusion (MTF) involves compressing an initial magnetically confined plasma of about 1e23 m-3, 100eV, 7 Tesla, 20 cm radius, >100 μsec life with a 1000x volume compression in 100 microseconds. If near adiabatic compression is achieved, the final plasma of 1e26 m-3, 10keV, 700 Tesla, 2 cm radius, confined for 10 μsec would produce interesting fusion energy gain. General Fusion (GF) is developing an acoustic compression system using pneumatic pistons focusing a shock wave on the CT plasma in the center of a 3 m diameter sphere filled with liquid lead-lithium. Low cost driver, straightforward heat extraction, good tritium breeding ratio and excellent neutron protection could lead to a practical power plant. GF (65 employees) has an active plasma R&D program including both full scale and reduced scale plasma experiments and simulation of both. Although acoustic driven compression of full scale plasmas is the end goal, present compression studies use reduced scale plasmas and chemically accelerated Aluminum liners. We will review results from our plasma target development, motivate and review the results of dynamic compression field tests and briefly describe the work to date on the acoustic driver front.

  20. Photoinduced Fusion of Lipid Bilayer Membranes.

    PubMed

    Suzuki, Yui; Nagai, Ken H; Zinchenko, Anatoly; Hamada, Tsutomu

    2017-03-14

    We have developed a novel system for photocontrol of the fusion of lipid vesicles through the use of a photosensitive surfactant containing an azobenzene moiety (AzoTAB). Real-time microscopic observations clarified a change in both the surface area and internal volume of vesicles during fusion. We also determined the optimal cholesterol concentrations and temperature for inducing fusion. The mechanism of fusion can be attributed to a change in membrane tension, which is caused by the solubilization of lipids through the isomerization of AzoTAB. We used a micropipet technique to estimate membrane tension and discuss the mechanism of fusion in terms of membrane elastic energy. The obtained results regarding this novel photoinduced fusion could lead to a better understanding of the mechanism of membrane fusion in living cells and may also see wider applications, such as in drug delivery and biomimetic material design.

  1. Object recognition approach based on feature fusion

    NASA Astrophysics Data System (ADS)

    Wang, Runsheng

    2001-09-01

    Multi-sensor information fusion plays an important pole in object recognition and many other application fields. Fusion performance is tightly depended on the fusion level selected and the approach used. Feature level fusion is a potential and difficult fusion level though there might be mainly three fusion levels. Two schemes are developed for key issues of feature level fusion in this paper. In feature selecting, a normal method developed is to analyze the mutual relationship among the features that can be used, and to be applied to order features. In object recognition, a multi-level recognition scheme is developed, whose procedure can be controlled and updated by analyzing the decision result obtained in order to achieve a final reliable result. The new approach is applied to recognize work-piece objects with twelve classes in optical images and open-country objects with four classes based on infrared image sequence and MMW radar. Experimental results are satisfied.

  2. Measuring time of flight of fusion products in an inertial electrostatic confinement fusion device for spatial profiling of fusion reactions

    SciTech Connect

    Donovan, D. C.; Boris, D. R.; Kulcinski, G. L.; Santarius, J. F.; Piefer, G. R.

    2013-03-15

    A new diagnostic has been developed that uses the time of flight (TOF) of the products from a nuclear fusion reaction to determine the location where the fusion reaction occurred. The TOF diagnostic uses charged particle detectors on opposing sides of the inertial electrostatic confinement (IEC) device that are coupled to high resolution timing electronics to measure the spatial profile of fusion reactions occurring between the two charged particle detectors. This diagnostic was constructed and tested by the University of Wisconsin-Madison Inertial Electrostatic Confinement Fusion Group in the IEC device, HOMER, which accelerates deuterium ions to fusion relevant energies in a high voltage ({approx}100 kV), spherically symmetric, electrostatic potential well [J. F. Santarius, G. L. Kulcinski, R. P. Ashley, D. R. Boris, B. B. Cipiti, S. K. Murali, G. R. Piefer, R. F. Radel, T. E. Radel, and A. L. Wehmeyer, Fusion Sci. Technol. 47, 1238 (2005)]. The TOF diagnostic detects the products of D(d,p)T reactions and determines where along a chord through the device the fusion event occurred. The diagnostic is also capable of using charged particle spectroscopy to determine the Doppler shift imparted to the fusion products by the center of mass energy of the fusion reactants. The TOF diagnostic is thus able to collect spatial profiles of the fusion reaction density along a chord through the device, coupled with the center of mass energy of the reactions occurring at each location. This provides levels of diagnostic detail never before achieved on an IEC device.

  3. Fusion evaporation and fusion-fission with aligned /sup 23/Na ions at energies near and below the fusion barrier

    SciTech Connect

    Butsch, R.; Jaensch, H.; Kraemer, D.; Moebius, K.; Ott, W.; Steffens, E.; Tungate, G.; Weller, a.A.; Becker, K.; Blatt, K.; and others

    1987-10-01

    Using aligned /sup 23/Na beams, fusion cross sections sigma/sup fus/ and second-rank tensor analyzing powers for fusion T/sub 20//sup fus/ have been measured at energies near and below the fusion barrier for /sup 23/Na+ /sup 48/Ti and for /sup 23/Na+ /sup 206/Pb. At sub-barrier energies, large, nearly maximal, values of T/sub 20//sup fus/ occur, especially for fusion with the heavy target /sup 206/Pb. This reflects the strong influence of the spectroscopic deformation of the projectile on the fusion process at energies below the barrier. However, within a quantum-mechanical coupled-channels calculation this degree of freedom is not enough to describe both the fusion cross section and the second-rank tensor analyzing power for fusion in the energy regime below the fusion barrier. It is shown that the coupling of the fusion channel to inelastic excitations of the projectile and the target can describe the magnitude and energy dependence of T/sub 20//sup fus/ for both heavy ion systems, but fails to reproduce the ''sub-barrier enhancement'' of the fusion cross section for both systems.

  4. Studies on the fusion peptide of a paramyxovirus fusion glycoprotein: roles of conserved residues in cell fusion.

    PubMed Central

    Horvath, C M; Lamb, R A

    1992-01-01

    The role of residues in the conserved hydrophobic N-terminal fusion peptide of the paramyxovirus fusion (F) protein in causing cell-cell fusion was examined. Mutations were introduced into the cDNA encoding the simian virus 5 (SV5) F protein, the altered F proteins were expressed by using an eukaryotic vector, and their ability to mediate syncytium formation was determined. The mutant F proteins contained both single- and multiple-amino-acid substitutions, and they exhibited a variety of intracellular transport properties and fusion phenotypes. The data indicate that many substitutions in the conserved amino acids of the simian virus 5 F fusion peptide can be tolerated without loss of biological activity. Mutant F proteins which were not transported to the cell surface did not cause cell-cell fusion, but all of the mutants which were transported to the cell surface were fusion competent, exhibiting fusion properties similar to or better than those of the wild-type F protein. Mutant F proteins containing glycine-to-alanine substitutions had altered intracellular transport characteristics, yet they exhibited a great increase in fusion activity. The potential structural implications of this substitution and the possible importance of these glycine residues in maintaining appropriate levels of fusion activity are discussed. Images PMID:1548771

  5. Prospects for toroidal fusion reactors

    SciTech Connect

    Sheffield, J.; Galambos, J.D.

    1994-06-01

    Work on the International Thermonuclear Experimental Reactor (ITER) tokamak has refined understanding of the realities of a deuterium-tritium (D-T) burning magnetic fusion reactor. An ITER-like tokamak reactor using ITER costs and performance would lead to a cost of electricity (COE) of about 130 mills/kWh. Advanced tokamak physics to be tested in the Toroidal Physics Experiment (TPX), coupled with moderate components in engineering, technology, and unit costs, should lead to a COE comparable with best existing fission systems around 60 mills/kWh. However, a larger unit size, {approximately}2000 MW(e), is favored for the fusion system. Alternative toroidal configurations to the conventional tokamak, such as the stellarator, reversed-field pinch, and field-reversed configuration, offer some potential advantage, but are less well developed, and have their own challenges.

  6. Investigation of condensed matter fusion

    SciTech Connect

    Jones, S.E.; Berrondo, M.; Czirr, J.B.; Decker, D.L.; Harrison, K.; Jensen, G.L.; Palmer, E.P.; Rees, L.B.; Taylor, S.; Vanfleet, H.B.; Wang, J.C.; Bennion, D.N.; Harb, J.N.; Pitt, W.G.; Thorne, J.M.; Anderson, A.N.; McMurtry, G.; Murphy, N.; Goff, F.E.

    1990-12-01

    Work on muon-catalyzed fusion led to research on a possible new type of fusion occurring in hydrogen isotopes embedded in metal lattices. While the nuclear-product yields observed to date are so small as to require careful further checking, rates observed over short times appear sufficiently large to suggest that significant neutrons and triton yields could be realized -- if the process could be understood and controlled. During 1990, we have developed two charged-particle detection systems and three new neutron detectors. A segmented, high-efficiency neutron counter was taken into 600 m underground in a mine in Colorado for studies out of the cosmic-ray background. Significant neutron emissions were observed in this environment in both deuterium-gas-loaded metals and in electrolytic cells, confirming our earlier observations.

  7. Interpreting inertial fusion neutron spectra

    NASA Astrophysics Data System (ADS)

    Munro, David H.

    2016-03-01

    A burning laser fusion plasma produces a neutron spectrum first described by Brysk (1973 Plasma Phys. Control. Fusion 15 611). This and more recent work deals with the spectrum produced by a single fluid element. The distribution of temperatures and velocities in multiple fluid elements combine in any real spectrum; we derive formulas for how the neutron spectrum averages these contributions. The single element momentum spectrum is accurately Gaussian, but the multi-element spectrum exhibits higher moments. In particular, the skew and kurtosis are likely to be large enough to measure. Even the single fluid element spectrum may exhibit measurable directional anisotropy, so that instruments with different lines of sight should see different yields, mean velocities, mean temperatures, and higher moments. Finally, we briefly discuss how scattering in the imploded core modifies the neutron spectrum by changing the relative weighting of fuel regions with different temperatures and velocities.

  8. Interplanetary propulsion using inertial fusion

    SciTech Connect

    Orth, C.D.; Hogan, W.J.; Hoffman, N.; Murray, K.; Klein, G.; Diaz, F.C.

    1987-01-01

    Inertial fusion can be used to power spacecraft within the solar system and beyond. Such spacecraft have the potential for short-duration manned-mission performance exceeding other technologies. We are conducting a study to assess the systems aspects of inertial fusion as applied to such missions, based on the conceptual engine design of Hyde (1983) we describe the required systems for an entirely new spacecraft design called VISTA that is based on the use of DT fuel. We give preliminary design details for the power conversion and power conditioning systems for manned missions to Mars of total duration of about 100 days. Specific mission performance results will be published elsewhere, after the study has been completed.

  9. Endoscopic Accessory Navicular Synchondrosis Fusion.

    PubMed

    Lui, Tun Hing

    2016-12-01

    The accessory navicular bone is one of the most common accessory ossicles of the foot. Fewer than 1% of accessory navicular bones are symptomatic, and most of these are type II accessory navicular bones. A separation of the synchondrosis is considered one of the main causes of pain. After an injury to the synchondrosis has resulted in a chondro-osseous disruption, the combined forces of tension and shear from the posterior tibial tendon and the foot aggravate the injury and prevent it from healing. Fusion of the synchondrosis is a logical surgical treatment option if the pain is recalcitrant to conservative measures. The purpose of this technical note is to report an endoscopic approach to achieve fusion. It has the advantages of better cosmesis, less scar pain, less risk of nonunion, and potential to examine the tibialis posterior tendon and the talonavicular joint.

  10. FUSION WELDING METHOD AND APPARATUS

    DOEpatents

    Wyman, W.L.; Steinkamp, W.I.

    1961-01-17

    An apparatus for the fusion welding of metal pieces at a joint is described. The apparatus comprises a highvacuum chamber enclosing the metal pieces and a thermionic filament emitter. Sufficient power is applied to the emitter so that when the electron emission therefrom is focused on the joint it has sufficient energy to melt the metal pieces, ionize the metallic vapor abcve the molten metal, and establish an arc discharge between the joint and the emitter.

  11. Inertial-confinement-fusion targets

    SciTech Connect

    Hendricks, C.D.

    1981-11-16

    Inertial confinement fusion (ICF) targets are made as simple flat discs, as hollow shells or as complicated multilayer structures. Many techniques have been devised for producing the targets. Glass and metal shells are made by using drop and bubble techniques. Solid hydrogen shells are also produced by adapting old methods to the solution of modern problems. Some of these techniques, problems and solutions are discussed. In addition, the applications of many of the techniques to fabrication of ICF targets is presented.

  12. Gasdynamic Mirror Fusion Propulsion Experiment

    NASA Technical Reports Server (NTRS)

    Emrich, William J., Jr.; Rodgers, Stephen L. (Technical Monitor)

    2001-01-01

    Nuclear fusion appears to be the most promising concept for producing extremely high specific impulse rocket engines. One particular fusion concept which seems to be particularly well suited for fusion propulsion applications is the gasdynamic mirror (GDM). This device would operate at much higher plasma densities and with much larger LD ratios than previous mirror machines. Several advantages accrue from such a design. First, the high LA:) ratio minimizes to a large extent certain magnetic curvature effects which lead to plasma instabilities causing a loss of plasma confinement. Second, the high plasma density will result in the plasma behaving much more Re a conventional fluid with a mean free path shorter than the length of the device. This characteristic helps reduce problems associated with "loss cone" microinstabilities. An experimental GDM device is currently being constructed at the NASA Marshall Space Flight Center to provide an initial assessment of the feasibility of this type of propulsion system. Initial experiments are expected to commence in the late fall of 2000.

  13. 75 FR 71183 - 23rd Meeting: RTCA Special Committee 206: EUROCAE WG 76 Plenary: AIS and MET Data Link Services

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-22

    ... Services and a revised Terms of Reference (TOR) for SC-206 has been approved by the RTCA Program Management... receipt, a Concept of Use for AIS and MET Data Link Services and an AIS and MET Services Delivery Architecture Recommendations are included in the TOR deliverables. The Concept of Use for AIS and MET Data...

  14. Publication of Papers Presented at URSI 23RD General Assembly as a Special Section of Radio Science

    DTIC Science & Technology

    1992-05-15

    the been determined in Figure I as black dots, and the spaced direction finding measurements made in conjugate point of the ionospheric exit region of...In section 2, like Maslov (19651, Ludwig [1966], and others. In Rytov’s method is generalized to the form of an the applied form, Maslov’s method is...IN INHOMOGENEOUS IONOSPHERE I is expanded, where e(r) is relative dielectric permit- I I tivity, k = adc is wave number in free space , w = a P 4 40 2

  15. Minutes of the Explosives Safety Seminar (23rd) Held at Atlanta, Georgia on 9-11 August 1988. Volume 1

    DTIC Science & Technology

    1988-08-01

    evce Securing the lift truck load was also considered for mitigating the accident involving a drop which resulted in a detonation. Using battery...15 1/30 < a/z < 1/15 1.0 >15 > 1/15 Figur. 4 Pressurs-Ir.oulse Relation fnP Stpl A2m 407 p peak applied pressure (F/L 2 ) i applied specific impulse

  16. Symposium (International) on Combustion, 23rd, Universite d'Orleans, France, July 22-27, 1990, Proceedings

    NASA Technical Reports Server (NTRS)

    1991-01-01

    The present symposium on combustion discusses reaction kinetics, NO(x) kinetics, premixed, diffusion, and nonsteady flames, turbulent combustion, hazardous waste, fluidized bed combustion, coal boilers and furnaces, engines, heterogeneous kinetics, heterogeneous, droplet, and microgravity combustion, and high-temperature synthesis. Attention is given to reactions of biphenyl, methylnaphthalenes, and phenanthrene with atomic oxygen in the gas phase, the oxidation of ortho-xylene, the effects of water on combustion kinetics at high pressure, and the formation and measurement of N2O in combustion systems. Topics addressed include large ions in premixed benzene-oxygen flames, the structure and kinetics of CH4/N2O flames, the propagation of unsteady hydrogen premixed flames near flammability limits, and the basic structure of lean propane flames. Also considered are OH measurements of piloted diffusion flames of nitrogen-diluted methane near extinction, waste combustion, preferential oxidation of carbon surfaces, and reburning mechanisms in a pulverized coal combustor.

  17. International Conference on Coordination Chemistry (23rd) Held at Boulder, Colorado on 29 July-3 August, 1984.

    DTIC Science & Technology

    1984-09-26

    Reactivity and Redox Pathways-Theory and Experiment- Unusual Oxidation States C. Kinetics and Mechanisms of Transition Metal Compound Reactions D...Wilke of West Germany, Professor Richard Holm of the United States, and Henry Taube of the United States, and reci- pient of the 1983 Nobel Prize in...Energetics and Dynamics-Kinetics and Mechanisms ; 2) Energetics and Dynamt cs-E lectrochmt stry/Thermodynamic s; 3) Biotnorgantc-Metalloenzyms; 4) Synthesis

  18. Proceedings of the Annual Adult Education Research Conference (23rd, Lincoln, Nebraska, April 1-3, 1982).

    ERIC Educational Resources Information Center

    Nebraska Univ., Lincoln. Dept. of Adult and Continuing Education.

    These proceedings of a conference on research in the field of adult education contain the texts of 40 conference papers and 4 symposia. Included among the areas examined in the individual reports are the following: education participation scale factor structure and correlates for 12,000 learners, a comparative analysis of adult education research…

  19. 1986 Annual Conference on Nuclear and Space Radiation Effects, 23rd, Providence, RI, July 21-23, 1986, Proceedings

    NASA Technical Reports Server (NTRS)

    Ellis, Thomas D. (Editor)

    1986-01-01

    The present conference on the effects of nuclear and space radiation on electronic hardware gives attention to topics in the basic mechanisms of radiation effects, dosimetry and energy-dependent effects, electronic device radiation hardness assurance, SOI/SOS radiation effects, spacecraft charging and space radiation, IC radiation effects and hardening, single-event upset (SEU) phenomena and hardening, and EMP/SGEMP/IEMP phenomena. Specific treatments encompass the generation of interface states by ionizing radiation in very thin MOS oxides, the microdosimetry of meson energy deposited on 1-micron sites in Si, total dose radiation and engineering studies, plasma interactions with biased concentrator solar cells, the transient imprint memory effect in MOS memories, mechanisms leading to SEU, and the vaporization and breakdown of thin columns of water.

  20. 76 FR 1065 - Security Zone; 23rd Annual North American International Auto Show, Detroit River, Detroit, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-07

    ... Auto Show, Detroit River, Detroit, MI AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY... Auto Show (NAIAS) being held at Cobo Hall in downtown Detroit, MI. DATES: This rule is effective from 9... Auto Show (NAIAS) being held at Cobo Hall in downtown Detroit, MI from possible sabotage or...

  1. Research: Reflecting Practice. Papers from the SCUTREA Annual Conference (23rd, Manchester, England, July 6-8, 1993).

    ERIC Educational Resources Information Center

    Miller, Nod, Ed.; Jones, David J., Ed.

    The following papers are included: "Social Classification of Women's Work" (Benn, Burton); "Developing Models of Learning from Experience" (Boud, Walker); "'Research Reflecting Practice?'" (Edwards, Usher); "Metaphors and Their Implications for Research and Practice in Adult and Community Education" (Hunt); "'Common-Sense' Approach to Reflection"…

  2. Minutes of the Explosives Safety Seminar (23rd) Held at Atlanta, Georgia on 9-11 August 1988. Volume 2

    DTIC Science & Technology

    1988-08-01

    blending of different fibres (in textile industry) etc. 4.4 Acceleration of the rate of decay of the charge is feasible by adoption of measures like ...R. Smith Underground Storage in Unlined Rock Tunnels: Rock Mechanics Considerations in Estimating Damage Levels ...1270 20 8 cc 40 II’ ii.0CC w~I1w 1. 1271 AM upper level of the building for unpacking and processing. On the upper A level , the pellets of munitions

  3. Will Today's Electronic Journals Be Accessible in the 23rd Century: Issues in Long-Term Archiving (SIG STI, IFP)

    ERIC Educational Resources Information Center

    Lippert, Margaret

    2000-01-01

    This abstract of a planned session on access to scientific and technical journals addresses policy and standard issues related to long-term archives; digital archiving models; economic factors; hardware and software issues; multi-publisher electronic journal content integration; format considerations; and future data migration needs. (LRW)

  4. International Applied Military Psychology Symposium (23rd) Held in Lisbon, Portugal on June 1-5, 1987

    DTIC Science & Technology

    1987-12-30

    questions of a social combination of accelerated resignations, psychological nature follow on the heels a drop in the birth rate, and reductions of the...of the limits of the military, such men have families, suffer stress, The first speaker to address the debate social questions, and participate...fluctuations the data may be used to assess the ef- usually on the order of 1-2 percent. fects of variations in social , political, Turnover thus was

  5. Proceedings of the 23rd Annual Penn Linguistics Colloquium. University of Pennsylvania Working Papers in Linguistics, Volume 6, Number 1.

    ERIC Educational Resources Information Center

    Alexander, Jim, Ed.; Han, Na-Rae, Ed.; Fox, Michelle Minnick, Ed.

    This issue includes the following articles: "Assimilation to the Unmarked" (Eric Bakovic); "On the Non-Universality of Functional Projections and the Effects on Parametrized Variation: Evidence from Creoles" (Marlyse Baptista); "What Turkish Acquisition Tells Us about Underlying Word Order and Scrambling" (Natalie Batman-Ratyosyan, Karin…

  6. International Conference on Coordination Chemistry (23rd) Held at Boulder, Colorado on 29 July - 3 August 1984. Abstracts of Paper.

    DTIC Science & Technology

    1984-08-03

    Institut Le Bel, Universit6 Louis Pasteur, 4, rue Blaise Pascal , 67000 Strasbourg, France Binuclear copper sites have been implicated in several copper...univtsitd Louis Pasteur, 4, rue laise Pascal , 67000 Stvashouri, Prance. (a) Laboratoires do Chisie (LA CONS 321), Ddpartinsnt do Rchezcb* Fondamntals...Cours do Ia Libdration, 33405 Talence - France, and * Sciences des Hstdriaux, ISC, 1, rue laise Pascal , 67008 Strasbourg Cedox - France. Clusters of

  7. Observations of membrane fusion in a liposome dispersion: the missing fusion intermediate?

    PubMed Central

    Foldvari, Marianna

    2015-01-01

    Early intermediate structures of liposome-liposome fusion events were captured by freeze-fracture electron microscopic (EM) technique. The images show the morphology of the fusion interface at several different stages of the fusion event. One of the intermediates was captured at a serendipitous stage of two vesicles’ membranes (both leaflets) merging and their contents starting to intermix clearly showing the fusion interface with a previously unseen fusion rim. From the morphological information a hypothetical sequence of the fusion event and corresponding lipid structural arrangements are described. PMID:26069726

  8. A local approach for focussed Bayesian fusion

    NASA Astrophysics Data System (ADS)

    Sander, Jennifer; Heizmann, Michael; Goussev, Igor; Beyerer, Jürgen

    2009-04-01

    Local Bayesian fusion approaches aim to reduce high storage and computational costs of Bayesian fusion which is separated from fixed modeling assumptions. Using the small world formalism, we argue why this proceeding is conform with Bayesian theory. Then, we concentrate on the realization of local Bayesian fusion by focussing the fusion process solely on local regions that are task relevant with a high probability. The resulting local models correspond then to restricted versions of the original one. In a previous publication, we used bounds for the probability of misleading evidence to show the validity of the pre-evaluation of task specific knowledge and prior information which we perform to build local models. In this paper, we prove the validity of this proceeding using information theoretic arguments. For additional efficiency, local Bayesian fusion can be realized in a distributed manner. Here, several local Bayesian fusion tasks are evaluated and unified after the actual fusion process. For the practical realization of distributed local Bayesian fusion, software agents are predestinated. There is a natural analogy between the resulting agent based architecture and criminal investigations in real life. We show how this analogy can be used to improve the efficiency of distributed local Bayesian fusion additionally. Using a landscape model, we present an experimental study of distributed local Bayesian fusion in the field of reconnaissance, which highlights its high potential.

  9. Multiscale Medical Image Fusion in Wavelet Domain

    PubMed Central

    Khare, Ashish

    2013-01-01

    Wavelet transforms have emerged as a powerful tool in image fusion. However, the study and analysis of medical image fusion is still a challenging area of research. Therefore, in this paper, we propose a multiscale fusion of multimodal medical images in wavelet domain. Fusion of medical images has been performed at multiple scales varying from minimum to maximum level using maximum selection rule which provides more flexibility and choice to select the relevant fused images. The experimental analysis of the proposed method has been performed with several sets of medical images. Fusion results have been evaluated subjectively and objectively with existing state-of-the-art fusion methods which include several pyramid- and wavelet-transform-based fusion methods and principal component analysis (PCA) fusion method. The comparative analysis of the fusion results has been performed with edge strength (Q), mutual information (MI), entropy (E), standard deviation (SD), blind structural similarity index metric (BSSIM), spatial frequency (SF), and average gradient (AG) metrics. The combined subjective and objective evaluations of the proposed fusion method at multiple scales showed the effectiveness and goodness of the proposed approach. PMID:24453868

  10. Leaching study of PNL 76-68 glass beads using the LLNL continuous-flow method and the PNL modified IAEA method. Final report

    SciTech Connect

    Coles, D.G.; Mensing, R.W.; Rego, J.; Weed, H.C.; Buddemeier, R.W.

    1982-10-04

    A long-term single-pass continuous-flow (SPCF) leaching test was conducted on the glass waste form PNL 76-68. Leaching rates of Np, Pu and various stable elements were measured at 25 and 75/sup 0/C with three different solutions and three different flow rates. The SPCF leaching results were compared with results of a modified IAEA leach test performed by Pacific Northwest Laboratories (PNL). Elemental leach rates and their variation with temperature, flow rate and solution composition were established. The LLNL and PNL leach test results appear to agree within experimental uncertainties. The magnitude of the leach rates determined for Np and the glass matrix elements is 10/sup -5/ grams of glass/cm/sup 2/ geometric solid surface area/day. The rates increase with temperature and with solution flow rate, and are similar in brine and distilled water but higher in a bicarbonate solution. Other cations exhibit somewhat different behavior, and Pu in particular yields a much lower apparent leach rate, probably because of sorption or precipitation effects after release from the glass matrix. After the initial few days, most elements are leached at a constant rate. Matrix dissolution appears to be the most probable rate controlling step for the leaching of most elements. 23 figures, 12 tables.

  11. Leaching study of PNL 76-68 glass beads using the LLNL continuous-flow method and the PNL-modified IAEA method. Final report

    SciTech Connect

    Buddemeier, R.W.; Coles, D.G.; Mensing, R.W.; Rego, J.; Weed, H.C.

    1982-08-20

    Lawrence Livermore National Laboratory (LLNL) has conducted a long-term single-pass continuous-flow (SPCF) leaching test of the glass waste form PNL 76-68. Leaching rates of Np, Pu, and various stable elements were measured at 25/sup 0/ and 75/sup 0/C with three different solutions and three different flow rates. The purposes of the study were: (1) to compare SPCF leaching results with the results of a modified IAEA leach test performed by Pacific Northwest Laboratories (PNL); (2) to establish elemental leach rates and their variation with temperature, flow rate and solution composition; and (3) to gain insight into the leaching mechanisms. The LLNL and PNL leach tests yielded results which appear to agree within experimental uncertainties. The magnitude of the leach rates determined for Np and the glass matrix elements is 10/sup -5/ grams of glass/cm/sup 2/ geometric solid surface area/day. The rates increase with temperature and with solution flow rate, and are similar in brine and distilled water but higher in a bicarbonate solution. Other cations exhibit somewhat different behavior, and Pu in particular yields a much lower apparent leach rate, probably because of sorption or precipitation effects after release from the glass matrix. After the initial few days, most elements are leached at a constant rate. Matrix dissolution appears to be the most probable rate controlling step for the leaching of most elements.

  12. A new comparison of marine dispersion model performances for Fukushima Dai-ichi releases in the frame of IAEA MODARIA program.

    PubMed

    Periáñez, Raúl; Brovchenko, Igor; Duffa, Celine; Jung, Kyung-Tae; Kobayashi, Takuya; Lamego, Fernando; Maderich, Vladimir; Min, Byung-Il; Nies, Hartmut; Osvath, Iolanda; Psaltaki, Maria; Suh, Kyung-Suk

    2015-12-01

    A detailed intercomparison of marine dispersion models applied to the releases from Fukushima Dai-ichi nuclear power plant was carried out in the frame of MODARIA program, of the IAEA. Models were compared in such a way that the reasons of the discrepancies between them can be assessed (i.e., if they are due to the hydrodynamic part, the dispersion part, and the ultimate reasons). A sequential chain of dispersion exercises was carried out with this purpose. The overall idea is to harmonize models, making them run with the same forcing in a step-by-step procedure, in such a way that the main agent in producing discrepancy between models can be found. It was found that the main reason of discrepancies between models is due to the description of the hydrodynamics. However, once this has been suppressed, some variability between model outputs remains due to intrinsic differences between models (as numerical schemes). The numerical experiments were carried out for a perfectly conservative radionuclide and for (137)Cs (including water/sediment interactions). Model outputs for this radionuclide were also compared with measurements in water and sediments.

  13. Fusion Nuclear Science Pathways Assessment

    SciTech Connect

    C.E. Kessel, et. al.

    2012-02-23

    With the strong commitment of the US to the success of the ITER burning plasma mission, and the project overall, it is prudent to consider how to take the most advantage of this investment. The production of energy from fusion has been a long sought goal, and the subject of several programmatic investigations and time line proposals [1]. The nuclear aspects of fusion research have largely been avoided experimentally for practical reasons, resulting in a strong emphasis on plasma science. Meanwhile, ITER has brought into focus how the interface between the plasma and engineering/technology, presents the most challenging problems for design. In fact, this situation is becoming the rule and no longer the exception. ITER will demonstrate the deposition of 0.5 GW of neutron heating to the blanket, deliver a heat load of 10-20 MW/m2 or more on the divertor, inject 50-100 MW of heating power to the plasma, all at the expected size scale of a power plant. However, in spite of this, and a number of other technologies relevant power plant, ITER will provide a low neutron exposure compared to the levels expected to a fusion power plant, and will purchase its tritium entirely from world reserves accumulated from decades of CANDU reactor operations. Such a decision for ITER is technically well founded, allowing the use of conventional materials and water coolant, avoiding the thick tritium breeding blankets required for tritium self-sufficiency, and allowing the concentration on burning plasma and plasma-engineering interface issues. The neutron fluence experienced in ITER over its entire lifetime will be ~ 0.3 MW-yr/m2, while a fusion power plant is expected to experience 120-180 MW-yr/m2 over its lifetime. ITER utilizes shielding blanket modules, with no tritium breeding, except in test blanket modules (TBM) located in 3 ports on the midplane [2], which will provide early tests of the fusion nuclear environment with very low tritium production (a few g per year).

  14. Materials issues in fusion reactors

    NASA Astrophysics Data System (ADS)

    Suri, A. K.; Krishnamurthy, N.; Batra, I. S.

    2010-02-01

    The world scientific community is presently engaged in one of the toughest technological tasks of the current century, namely, exploitation of nuclear fusion in a controlled manner for the benefit of mankind. Scientific feasibility of controlled fusion of the light elements in plasma under magnetic confinement has already been proven. International efforts in a coordinated and co-operative manner are presently being made to build ITER - the International Thermonuclear Experimental Reactor - to test, in this first step, the concept of 'Tokamak' for net fusion energy production. To exploit this new developing option of making energy available through the route of fusion, India too embarked on a robust fusion programme under which we now have a working tokamak - the Aditya and a steady state tokamak (SST-1), which is on the verge of functioning. The programme envisages further development in terms of making SST-2 followed by a DEMO and finally the fusion power reactor. Further, with the participation of India in the ITER program in 2005, and recent allocation of half - a - port in ITER for placing our Lead - Lithium Ceramic Breeder (LLCB) based Test Blanket Module (TBM), meant basically for breeding tritium and extracting high grade heat, the need to understand and address issues related to materials for these complex systems has become all the more necessary. Also, it is obvious that with increasing power from the SST stages to DEMO and further to PROTOTYPE, the increasing demands on performance of materials would necessitate discovery and development of new materials. Because of the 14.1 MeV neutrons that are generated in the D+T reaction exploited in a tokamak, the materials, especially those employed for the construction of the first wall, the diverter and the blanket segments, suffer crippling damage due to the high He/dpa ratios that result due to the high energy of the neutrons. To meet this challenge, the materials that need to be developed for the tokamaks

  15. Lipids as modulators of membrane fusion mediated by viral fusion proteins.

    PubMed

    Teissier, Elodie; Pécheur, Eve-Isabelle

    2007-11-01

    Enveloped viruses infect host cells by fusion of viral and target membranes. This fusion event is triggered by specific glycoproteins in the viral envelope. Fusion glycoproteins belong to either class I, class II or the newly described third class, depending upon their arrangement at the surface of the virion, their tri-dimensional structure and the location within the protein of a short stretch of hydrophobic amino acids called the fusion peptide, which is able to induce the initial lipid destabilization at the onset of fusion. Viral fusion occurs either with the plasma membrane for pH-independent viruses, or with the endosomal membranes for pH-dependent viruses. Although, viral fusion proteins are parted in three classes and the subcellular localization of fusion might vary, these proteins have to act, in common, on lipid assemblies. Lipids contribute to fusion through their physical, mechanical and/or chemical properties. Lipids can thus play a role as chemically defined entities, or through their preferential partitioning into membrane microdomains called "rafts", or by modulating the curvature of the membranes involved in the fusion process. The purpose of this review is to make a state of the art on recent findings on the contribution of cholesterol, sphingolipids and glycolipids in cell entry and membrane fusion of a number of viral families, whose members bear either class I or class II fusion proteins, or fusion proteins of the recently discovered third class.

  16. Study of fusion Q-value rule in sub-barrier fusion of heavy ions

    NASA Astrophysics Data System (ADS)

    Liu, Xing-Xing; Zhang, Gao-Long; Zhang, Huan-Qiao

    2015-07-01

    A vast body of fusion data has been analyzed for different projectiles and target nuclei. It is indicated that the sub-barrier fusion depends on the fusion Q-value. In terms of a recently introduced fusion Q-value rule and an energy scaling reduction procedure, the experimental fusion excitation functions are reduced and compared with each other. It is found that the reduced fusion excitations of selected fusion systems show a similar trend. The fusion data for massive nuclei are in agreement with the Q-value rule. In the fusion process, the Q contribution should be considered. Within this approach, the sub-barrier fusion cross sections of most fusion systems can be predicted without involving any structure effects of colliding nuclei. Instances of disagreement are presented in a few fusion systems. The use of the energy scaling as a criterion of possible experimental data inconsistency is discussed. More precise experimental fusion data need to be measured. Supported by National Nature Science Foundation of China (11475013, 11035007, 11175011), State Key Laboratory of Software Development Environment (SKLSDE-2014ZX-08), Fundamental Research Funds for the Central Universities and the Key Laboratory of High Precision Nuclear Spectroscopy, Institute of Modern Physics, Chinese Academy of Sciences

  17. Inertial-confinement fusion with lasers

    NASA Astrophysics Data System (ADS)

    Betti, R.; Hurricane, O. A.

    2016-05-01

    The quest for controlled fusion energy has been ongoing for over a half century. The demonstration of ignition and energy gain from thermonuclear fuels in the laboratory has been a major goal of fusion research for decades. Thermonuclear ignition is widely considered a milestone in the development of fusion energy, as well as a major scientific achievement with important applications in national security and basic sciences. The US is arguably the world leader in the inertial confinement approach to fusion and has invested in large facilities to pursue it, with the objective of establishing the science related to the safety and reliability of the stockpile of nuclear weapons. Although significant progress has been made in recent years, major challenges still remain in the quest for thermonuclear ignition via laser fusion. Here, we review the current state of the art in inertial confinement fusion research and describe the underlying physical principles.

  18. Carbon Nanotubes Mediate Fusion of Lipid Vesicles.

    PubMed

    Bhaskara, Ramachandra M; Linker, Stephanie M; Vögele, Martin; Köfinger, Jürgen; Hummer, Gerhard

    2017-02-28

    The fusion of lipid membranes is opposed by high energetic barriers. In living organisms, complex protein machineries carry out this biologically essential process. Here we show that membrane-spanning carbon nanotubes (CNTs) can trigger spontaneous fusion of small lipid vesicles. In coarse-grained molecular dynamics simulations, we find that a CNT bridging between two vesicles locally perturbs their lipid structure. Their outer leaflets merge as the CNT pulls lipids out of the membranes, creating an hourglass-shaped fusion intermediate with still intact inner leaflets. As the CNT moves away from the symmetry axis connecting the vesicle centers, the inner leaflets merge, forming a pore that completes fusion. The distinct mechanism of CNT-mediated membrane fusion may be transferable, providing guidance in the development of fusion agents, e.g., for the targeted delivery of drugs or nucleic acids.

  19. Technical Note: Estimating fusion properties for polyacids

    NASA Astrophysics Data System (ADS)

    Compernolle, S.; Ceulemans, K.; Müller, J.-F.

    2011-03-01

    Organic aerosol (OA) components are generally assumed to be liquid-like. Hence, to describe the partitioning of these components, the liquid vapor pressure of these components is desired. Polyacids and functionalized polyacids can be a significant part of OA. But often, measurements are available only for solid state vapor pressure, which can differ by orders of magnitude from their liquid counterparts. To convert such a sublimation pressure to a subcooled liquid vapor pressure, fusion properties (two out of these three quantities: fusion enthalpy, fusion entropy, fusion temperature) are required. Unfortunately, experimental knowledge of fusion properties is sometimes missing in part or totally, hence an estimation method is required. Several fusion data estimation methods are tested here against experimental data of polyacids. Next, we develop a simple estimation method, specifically for this kind of compounds, reducing significantly the estimation error.

  20. Lunar Helium-3 and Fusion Power

    NASA Technical Reports Server (NTRS)

    1988-01-01

    The NASA Office of Exploration sponsored the NASA Lunar Helium-3 and Fusion Power Workshop. The meeting was held to understand the potential of using He-3 from the moon for terrestrial fusion power production. It provided an overview, two parallel working sessions, a review of sessions, and discussions. The lunar mining session concluded that mining, beneficiation, separation, and return of He-3 from the moon would be possible but that a large scale operation and improved technology is required. The fusion power session concluded that: (1) that He-3 offers significant, possibly compelling, advantages over fusion of tritium, principally increased reactor life, reduced radioactive wastes, and high efficiency conversion, (2) that detailed assessment of the potential of the D/He-3 fuel cycle requires more information, and (3) D/He-3 fusion may be best for commercial purposes, although D/T fusion is more near term.