Science.gov

Sample records for 256-detector row ct

  1. Intercostal Artery Supplying Hepatocellular Carcinoma: Demonstration of a Tumor Feeder by C-arm CT and Multidetector Row CT

    SciTech Connect

    Kim, Hyo-Cheol Chung, Jin Wook; Lee, In Joon; An, Sangbu; Seong, Nak Jong; Son, Kyu Ri; Jae, Hwan Jun; Park, Jae Hyung

    2011-02-15

    This study was designed to describe tumor feeders from the intercostal artery supplying hepatocellular carcinoma (HCC) on C-arm CT and multidetector row CT. From March 2008 to May 2009, C-arm CT of the intercostal artery was prospectively performed in 24 HCC patients. Two interventional radiologists, who performed C-arm CT, evaluated tumor feeders on C-arm CT and multidetector row CT scans by consensus. In total, 35 intercostal arteries were examined by C-arm CT. All tumor feeders except one showed a sharp upward turn at or near the costochondral junction. On axial C-arm CT images, all tumor feeders were observed as an enhancing dot in the upper intercostal space along the diaphragm. On multidetector CT scans, 17 tumor feeders were observed and 18 were not. Tumor feeders from the intercostal artery are observed as an enhancing dot along the diaphragm on C-arm CT and can be seen on multidetector row CT in approximately half of patients.

  2. Three-dimensional multi-detector row CT portal venography in the evaluation of portosystemic collateral vessels in liver cirrhosis.

    PubMed

    Kang, Heoung Keun; Jeong, Yong Yeon; Choi, Jun Ho; Choi, Song; Chung, Tae Woong; Seo, Jeong Jin; Kim, Jae Kyu; Yoon, Woong; Park, Jin Gyoon

    2002-01-01

    Multi-detector row computed tomography (CT) offers distinct advantages over traditional spiral CT. Multi-detector row CT scanners are faster and allow thinner collimation than single-detector row spiral CT scanners. The use of multi-detector row CT combined with postprocessing of the imaging data with a variety of three-dimensional reformatting techniques (eg, maximum intensity projection, shaded surface display, volume rendering) allows creation of vascular maps whose quality equals or exceeds that of maps created at classic angiography for many applications. Three-dimensional multi-detector row CT portal venography can help determine the extent and location of portosystemic collateral vessels (eg, left gastric vein, short gastric vein, esophageal and paraesophageal varices, splenorenal and gastrorenal shunts, paraumbilical and abdominal wall veins) in patients with liver cirrhosis and is probably the optimal imaging technique in this setting.

  3. Secondary aortoenteric fistula: active bleeding detected with multi-detector-row CT.

    PubMed

    Roos, Justus E; Willmann, Jürgen K; Hilfiker, Paul R

    2002-12-01

    We report a case of active bleeding of a secondary aortoenteric fistula (SAEF), in which CT angiography with multi-detector-row CT (MDCT) was finally diagnostic after negative catheter angiography and unsatisfactory endoscopy. The MDCT angiography clearly demonstrated the fistulous tract between the abdominal aortic graft and the duodenum. The dynamic process of bleeding was confirmed as a net increase of contrast agent accumulation in the duodenum through different phases. The MDCT angiography with its excellent 3D image quality is therefore a valuable method in the assessment of active SAEF bleeding. PMID:12522640

  4. [Multidetector row CT in assessment of coronary artery calcification on hemodialisis].

    PubMed

    Caro, P; Delgado, R; Dapena, F; Núñez, A

    2007-01-01

    Vascular calcification is a strong predictor of cardiovascular and all-cause mortality. Coronary artery calcification is more frequent, more extensive and progresses more rapidly in CKD than in general population. They are also considered a marker of coronary heart disease, with high prevalence and functional significance. It suggests that detection and surveillance may be worthwhile in general clinical practice. New non-invasive image techniques, like Multi-detector row CT, a type of spiral scanner, assess density and volume of calcification at multiple sites and allow quantitative scoring of vascular calcification using calcium scores analogous to those from electron-beam CT. We have assessed and quantified coronary artery calcification with 16 multidetector row CT in 44 patients on hemodialysis and their relationship with several cardiovascular risk factors. Coronary artery calcification prevalence was of 84 % with mean calcium score of 1580 +/- 2010 ( r 0-9844) with calcium score > 400 in 66% of patients. It was usually multiple, affecting more than two vessels in more than 50%. In all but one patient, left anterior descending artery was involved with higher calcium score level at right coronary artery. Advanced age, male, diabetes, smoking, more morbidity, cerebrovascular disease previous, and calcium-binders phosphate and analogous vitamin D treatment would seem to be associated with coronary artery calcification. Coronary artery calcification is very frequent and extensive, usually multiple and associated to modifiable risk factors in hemodialysis patients. Multi-detector-row CT seems an effective, suitable, readily applicable method to assess and quantify coronary artery calcification. PMID:18336102

  5. Diagnostic applications of cardiac multislice CT with sixteen-row scanner: state of the art.

    PubMed

    Tognini, Giuseppe; Arisi, Arianna; Ferrozzi, Francesco; De Blasi, Mario; De Filippo, Massimo; Paoli, Giorgia; Patti, Arianna; Bnà, Claudio; Zompatori, Maurizio; Ardissimo, Diego; Gherli, Tiziano

    2004-01-01

    Coronary angiography is nowadays the diagnostic standard in the evaluation of coronary artery anatomy, in the identification of stenoses and in the follow-up of revascularization procedures (PTCA-stenting, bypass). The limitations of such technique in terms of invasivity and high cost has targeted research efforts towards the development of non invasive diagnostic tools. Technological evolution in the field of helical CT has provided 2, 4, 8 and 16 detector-row multislice scanners characterized by progressive improvements in terms of spatial and temporal resolution that have made them increasingly suitable for the analysis of moving structures with high quality anatomic detail. The main cardiologic applications of multislice CT include coronary calcium scoring, the evaluation of coronary vascular anatomy and disease, follow-up of revascularization procedures (stenting, bypass), and the evaluation of cardiac walls and chambers. The aim of this paper is to describe the applications of sixteen detector-row multisclice CT in non invasive evaluation of cardiac and coronary diseases.

  6. Respiratory-gated segment reconstruction for radiation treatment planning using 256-slice CT-scanner during free breathing

    NASA Astrophysics Data System (ADS)

    Mori, Shinichiro; Endo, Masahiro; Kohno, Ryosuke; Minohara, Shinichi; Kohno, Kazutoshi; Asakura, Hiroshi; Fujiwara, Hideaki; Murase, Kenya

    2005-04-01

    The conventional respiratory-gated CT scan technique includes anatomic motion induced artifacts due to the low temporal resolution. They are a significant source of error in radiotherapy treatment planning for the thorax and upper abdomen. Temporal resolution and image quality are important factors to minimize planning target volume margin due to the respiratory motion. To achieve high temporal resolution and high signal-to-noise ratio, we developed a respiratory gated segment reconstruction algorithm and adapted it to Feldkamp-Davis-Kress algorithm (FDK) with a 256-detector row CT. The 256-detector row CT could scan approximately 100 mm in the cranio-caudal direction with 0.5 mm slice thickness in one rotation. Data acquisition for the RS-FDK relies on the assistance of the respiratory sensing system by a cine scan mode (table remains stationary). We evaluated RS-FDK in phantom study with the 256-detector row CT and compared it with full scan (FS-FDK) and HS-FDK results with regard to volume accuracy and image noise, and finally adapted the RS-FDK to an animal study. The RS-FDK gave a more accurate volume than the others and it had the same signal-to-noise ratio as the FS-FDK. In the animal study, the RS-FDK visualized the clearest edges of the liver and pulmonary vessels of all the algorithms. In conclusion, the RS-FDK algorithm has a capability of high temporal resolution and high signal-to-noise ratio. Therefore it will be useful when combined with new radiotherapy techniques including image guided radiation therapy (IGRT) and 4D radiation therapy.

  7. [Motion analysis of target in stereotactic radiotherapy of lung tumors using 320-row multidetector CT].

    PubMed

    Imae, Toshikazu; Haga, Akihiro; Nakagawa, Keiichi; Ino, Kenji; Tanaka, Kenichirou; Okano, Yukari; Sasaki, Katsutake; Saegusa, Shigeki; Shiraki, Takashi; Oritate, Takashi; Yano, Keiichi; Shinohara, Hiroyuki

    2011-01-01

    Multi-detector computed tomography (MDCT) has rapidly evolved and is increasingly used for treatment simulation of thoracic and abdominal radiotherapy. A 320-detector row CT scanner has recently become available that allows axial volumetric scanning of a 16-cm-long range in a patient without table movement. Current radiotherapy techniques require a generous margin around the presumed gross tumor volume (GTV) to account for uncertainties such as tumor motion and set up error. Motion analysis is useful to evaluate the internal margin of a moving target due to respiration and to improve therapeutic precision. The purpose of this study is to propose a method using phase-only correlation to automatically detect the target and to assess the motion of the target in numerical phantoms and patients. Free-breathing scans using 320-detector row CT were acquired for 4 patients with lung tumor(s). The proposed method was feasible for motion analysis of all numerical phantoms and patients. The results reproduced the facts that the motion of tumors in the patients varied in orbits during the respiratory cycle and exhibited hysteresis. The maximum distance between peak exhalation and inhalation increased as the tumors approached the diaphragm. The proposed method detected the three-dimensional position of the targets automatically and analyzed the trajectories. The tumor motion due to respiration differed by region and was greatest for the lower lobe. PMID:21471676

  8. Novel ultrahigh resolution data acquisition and image reconstruction for multi-detector row CT

    SciTech Connect

    Flohr, T. G.; Stierstorfer, K.; Suess, C.; Schmidt, B.; Primak, A. N.; McCollough, C. H.

    2007-05-15

    We present and evaluate a special ultrahigh resolution mode providing considerably enhanced spatial resolution both in the scan plane and in the z-axis direction for a routine medical multi-detector row computed tomography (CT) system. Data acquisition is performed by using a flying focal spot both in the scan plane and in the z-axis direction in combination with tantalum grids that are inserted in front of the multi-row detector to reduce the aperture of the detector elements both in-plane and in the z-axis direction. The dose utilization of the system for standard applications is not affected, since the grids are moved into place only when needed and are removed for standard scanning. By means of this technique, image slices with a nominal section width of 0.4 mm (measured full width at half maximum=0.45 mm) can be reconstructed in spiral mode on a CT system with a detector configuration of 32x0.6 mm. The measured 2% value of the in-plane modulation transfer function (MTF) is 20.4 lp/cm, the measured 2% value of the longitudinal (z axis) MTF is 21.5 lp/cm. In a resolution phantom with metal line pair test patterns, spatial resolution of 20 lp/cm can be demonstrated both in the scan plane and along the z axis. This corresponds to an object size of 0.25 mm that can be resolved. The new mode is intended for ultrahigh resolution bone imaging, in particular for wrists, joints, and inner ear studies, where a higher level of image noise due to the reduced aperture is an acceptable trade-off for the clinical benefit brought about by the improved spatial resolution.

  9. Overbeaming and overlapping of volume-scan CT with tube current modulation in a 320-detector row CT scanner

    NASA Astrophysics Data System (ADS)

    Liao, Ying-Lan; Chen, Yan-Shi; Lai, Nan-Ku; Chuang, Keh-Shih; Tsai, Hui-Yu

    2014-11-01

    The purpose of this study was to evaluate the performance of volume scan tube current modulation (VS-ATCM) with adaptive iterative dose reduction 3D (AIDR3D) technique in abdomen CT examinations. We scanned an elliptical cone-shaped phantom utilizing AIDR3D technique combined with VS-ATCM mode in a 320-detector row CT scanner. The image noise distributions with conventional filtered back-projction (FBP) technique and those with AIDR3D technique were compared. The radiation dose profile and tube current time product (mAs) in three noise levels of VS-ATCM modes were compared. The radiation beam profiles of five preset scan lengths were measured using Gafchromic film strips to assess the effects of overbeaming and everlapping. The results indicated that the image noises with AIDR3D technique was 13-74% lower than those in FBP technique. The mAs distributions can be a prediction for various abdominal sizes when undergoing a VS-ATCM mode scan. Patients can receive the radiation dose of overbeaming and overlapping during the VS-ATCM mode scans.

  10. Benefits of contrast-enhanced multidetector row CT colonography for preoperative staging in colorectal cancer patients

    NASA Astrophysics Data System (ADS)

    Iinuma, Gen; Moriyama, Noriyuki; Satake, Mitso; Miyakawa, Kunihisa; Muramatsu, Yukio; Tateishi, Ukihide; Akasu, Takayuki; Otake, Yousuke; Fujii, Takahiro; Kobayashi, Toshiaki

    2003-05-01

    Recently, CT colonography has been recognized as an effective option for evaluating colorectal polyps in the USA. We have applied this technique to preoperative staging of colorectal cancer patients with a contrast-enhanced multi-detector row CT (MDCT). The use of manipulated multi-planar reconstruction (MPR) views in contrast-enhanced MDCT colonography proved advantageous for detecting lymph node metastases. Furthermore, 3-dimensional (3D) endoluminal images with Hansfield-transparency settings allowed vascular views of the colorectal wall for identification of invasive colorectal cancers. Using endoluminal images, increase in flow and pooling of blood related to angiogenesis of invasive cancer could be demonstrated, not only in the lymph nodes but also in the colorectal wall. Both MPR views and 3D endoluminal images can be acquired from the same 3D volumetric data generated by helical scanning in MDCT colonography, and both have great potential as modalities for computer-aided diagnosis (CAD) using blood flow information. Therefore the use of CAD can be expected to improve radiologists' diagnostic performance with regard to colorectal cancer.

  11. Multi-detector row CT scanning in Paleoanthropology at various tube current settings and scanning mode.

    PubMed

    Badawi-Fayad, J; Yazbeck, C; Balzeau, A; Nguyen, T H; Istoc, A; Grimaud-Hervé, D; Cabanis, E- A

    2005-12-01

    The purpose of this study was to determine the optimal tube current setting and scanning mode for hominid fossil skull scanning, using multi-detector row computed tomography (CT). Four fossil skulls (La Ferrassie 1, Abri Pataud 1, CroMagnon 2 and Cro-Magnon 3) were examined by using the CT scanner LightSpeed 16 (General Electric Medical Systems) with varying dose per section (160, 250, and 300 mAs) and scanning mode (helical and conventional). Image quality of two-dimensional (2D) multiplanar reconstructions, three-dimensional (3D) reconstructions and native images was assessed by four reviewers using a four-point grading scale. An ANOVA (analysis of variance) model was used to compare the mean score for each sequence and the overall mean score according to the levels of the scanning parameters. Compared with helical CT (mean score=12.03), the conventional technique showed sustained poor image quality (mean score=4.17). With the helical mode, we observed a better image quality at 300 mAs than at 160 in the 3D sequences (P=0.03). Whereas in native images, a reduction in the effective tube current induced no degradation in image quality (P=0.05). Our study suggests a standardized protocol for fossil scanning with a 16 x 0.625 detector configuration, a 10 mm beam collimation, a 0.562:1 acquisition mode, a 0.625/0.4 mm slice thickness/reconstruction interval, a pitch of 5.62, 120 kV and 300 mAs especially when a 3D study is required.

  12. Multi-detector row CT scanning in Paleoanthropology at various tube current settings and scanning mode.

    PubMed

    Badawi-Fayad, J; Yazbeck, C; Balzeau, A; Nguyen, T H; Istoc, A; Grimaud-Hervé, D; Cabanis, E- A

    2005-12-01

    The purpose of this study was to determine the optimal tube current setting and scanning mode for hominid fossil skull scanning, using multi-detector row computed tomography (CT). Four fossil skulls (La Ferrassie 1, Abri Pataud 1, CroMagnon 2 and Cro-Magnon 3) were examined by using the CT scanner LightSpeed 16 (General Electric Medical Systems) with varying dose per section (160, 250, and 300 mAs) and scanning mode (helical and conventional). Image quality of two-dimensional (2D) multiplanar reconstructions, three-dimensional (3D) reconstructions and native images was assessed by four reviewers using a four-point grading scale. An ANOVA (analysis of variance) model was used to compare the mean score for each sequence and the overall mean score according to the levels of the scanning parameters. Compared with helical CT (mean score=12.03), the conventional technique showed sustained poor image quality (mean score=4.17). With the helical mode, we observed a better image quality at 300 mAs than at 160 in the 3D sequences (P=0.03). Whereas in native images, a reduction in the effective tube current induced no degradation in image quality (P=0.05). Our study suggests a standardized protocol for fossil scanning with a 16 x 0.625 detector configuration, a 10 mm beam collimation, a 0.562:1 acquisition mode, a 0.625/0.4 mm slice thickness/reconstruction interval, a pitch of 5.62, 120 kV and 300 mAs especially when a 3D study is required. PMID:16211320

  13. [Characteristics of pneumoconiosis on multi-detector row CT and its' anatomic-pathologic basis].

    PubMed

    Feng, Yuanchun; Yang, Zhigang; Li, Yuan; Chen, Tianwu; Wang, Qiling; Deng, Wen

    2011-04-01

    In order to investigate the fine distinction of the tomographic images and the dominant anatomic distributions, we carefully reviewed and analyzed the features and predominant anatomic distribution of forty-nine pneumoconiosis patients with confirmed diagnosis on multi-detector row CT (MDCT). It was found that the round and small opacity p and irregular small opacity were mostly shown in the MDCT features of pneumoconiosis, while the large opacity and progressive massive fibrosis (PMF) were less frequently depicted in the MDCT. Distributions of round and small opacity and irregular small opacity in the six lung lobes were significantly different (P < 0.01). The most common p opacity was significantly seen in the upper and lower left lungs as well as in the upper right lung's opacity was in the upper left lung as well as lower left and right lungs. The large opacity commonly distributed in upper left and right lungs, while the PMF was often shown in both of two lungs. The results demonstrated that the MDCT could be an effective modality for detecting tiny lesions and anatomic distribution of pneumoconiosis, and it would be helpful for early diagnosis and accurate staging of the pneumoconiosis disease.

  14. [Peripheral lung adenocarcinoma versus squamous cell carcinoma: evaluation with first-pass perfusion imaging using 64-detector row CT].

    PubMed

    Li, Yuan; Yang, Zhigang; Chen, Tianwu; Yu, Jianqun; Deng, Yuping; Li, Zhenlin

    2009-04-01

    The aim of this study was to elucidate the characteristics of time attenuation curve and CT perfusion parameters for pulmonary adenocarcinomas and squamous cell carcinomas. 58 cases of pulmonary adenocarcinomas and 27 cases of squamous cell carcinomas underwent first pass CT perfusion imaging with 64-row MDCT. Data were analyzed using commercial software to generate time attenuation curve (TAC) and CT perfusion parameters, including perfusion, peak enhanced (PE), time to peak (TTP), and blood volume (BV). For TAC, there were 36.2% of type I and 63.8% of type II in adenocarcinomas, while there were 22.2% of type I and 77.8% of type II in squamous cell carcinomas. There was not significant difference (P>0.05). Perfusion, PE, TTP and BV of adenocarcinomas were 63.2 +/- 45.4 ml x min(-1) x ml(-1), 60.2 +/- 46.6 Hu, 34.8 +/- 10.2 s and 34.3 +/- 23.6 ml x 100 g(-1), respectively, while 54.3 +/- 50.2 ml x min(-1) x ml(-1), 48.5 +/- 34.9 Hu, 36.1 +/- 11.2 s and 27.6 +/- 21.7 ml x 100 g(-1), for squamous cell carcinoma, respectively. No significant differences were found between groups (P>0.05). No significant differences in TAC and CT perfusion parameters were found between adenocarcinomas and squamous cell carcinomas.

  15. The role of multidetector-row CT in the diagnosis, classification and management of acute aortic syndrome

    PubMed Central

    Brown, I W; Peebles, C R; Harden, S P; Shambrook, J S

    2014-01-01

    The term “acute aortic syndrome” (AAS) encompasses several non-traumatic life-threatening pathologies of the thoracic aorta presenting in patients with a similar clinical profile. These include aortic dissection, intramural haematoma and penetrating atherosclerotic ulcers. These different pathological entities can be indistinguishable on clinical grounds alone and may be confused with other causes of chest pain, including myocardial infarction. Multidetector-row CT (MDCT) is the current modality of choice for imaging AAS with a sensitivity and specificity approaching 100%. Early diagnosis and accurate radiological classification is associated with improved clinical outcomes in AAS. We review the characteristic radiological features of the different pathologies that encompass AAS and highlight the vital role of MDCT in determining the management of these life-threatening conditions. PMID:25083552

  16. Misty mesentery: a pictorial review of multidetector-row CT findings.

    PubMed

    Filippone, A; Cianci, R; Di Fabio, F; Storto, M L

    2011-04-01

    The term "misty mesentery" indicates a pathological increase in mesenteric fat attenuation at computed tomography (CT). It is frequently observed on multidetector CT (MDCT) scans performed during daily clinical practice and may be caused by various pathological conditions, including oedema, inflammation, haemorrhage, neoplastic infiltration or sclerosing mesenteritis. In patients suffering from acute abdominal disease, misty mesentery may be considered a feature of the underlying disease. Otherwise, it may represent an incidental finding on MDCT performed for other reasons. This article describes the MDCT features of misty mesentery in different diseases in order to provide a rational approach to the differential diagnosis. PMID:21311992

  17. Value of Virtual Colonoscopy with 64 Row CT in Evaluation of Colorectal Cancer

    PubMed Central

    Zaleska-Dorobisz, Urszula; Łasecki, Mateusz; Nienartowicz, Ewa; Pelak, Joanna; Słonina, Joanna; Olchowy, Cyprian; Ścieżka, Marek; Sąsiadek, Marek

    2014-01-01

    Summary Background Virtual colonoscopy (VC) enables three-dimensional view of walls and internal lumen of the colon as a result of reconstruction of multislice CT images. The role of VC in diagnosis of the colon abnormalities systematically increases, and in many medical centers all over the world is carried out as a screening test of patients with high risk of colorectal cancer. Material/Methods We analyzed results of virtual colonoscopy of 360 patients with clinical suspicion of colorectal cancer. Sensitivity and specificity of CT colonoscopy for detection of colon cancers and polyps were assessed. Results Results of our research have shown high diagnostic efficiency of CT colonoscopy in detection of focal lesions in large intestine of 10 mm or more diameter. Sensitivity was 85.7%, specificity 89.2%. Conclusions Virtual colonoscopy is noninvasive and well tolerated by patients imaging method, which permits for early detection of the large intestine lesions with specificity and sensitivity similar to classical colonoscopy in screening exams in patients suspected for colorectal cancer. Good preparation of the patients for the examination is very important for proper diagnosis and interpretation of this imaginge procedure. PMID:25302086

  18. Radiation dose assessment in a 320-detector-row CT scanner used in cardiac imaging

    SciTech Connect

    Goma, Carles; Ruiz, Agustin; Jornet, Nuria; Latorre, Artur; Pallerol, Rosa M.; Carrasco, Pablo; Eudaldo, Teresa; Ribas, Montserrat

    2011-03-15

    Purpose: In the present era of cone-beam CT scanners, the use of the standardized CTDI{sub 100} as a surrogate of the idealized CTDI is strongly discouraged and, consequently, so should be the use of the dose-length product (DLP) as an estimate of the total energy imparted to the patient. However, the DLP is still widely used as a reference quantity to normalize the effective dose for a given scan protocol mainly because the CTDI{sub 100} is an easy-to-measure quantity. The aim of this article is therefore to describe a method for radiation dose assessment in large cone-beam single axial scans, which leads to a straightforward estimation of the total energy imparted to the patient. The authors developed a method accessible to all medical physicists and easy to implement in clinical practice in an attempt to update the bridge between CT dosimetry and the estimation of the effective dose. Methods: The authors used commercially available material and a simple mathematical model. The method described herein is based on the dosimetry paradigm introduced by the AAPM Task Group 111. It consists of measuring the dose profiles at the center and the periphery of a long body phantom with a commercial solid-state detector. A weighted dose profile is then calculated from these measurements. To calculate the CT dosimetric quantities analytically, a Gaussian function was fitted to the dose profile data. Furthermore, the Gaussian model has the power to condense the z-axis information of the dose profile in two parameters: The single-scan central dose, f(0), and the width of the profile, {sigma}. To check the energy dependence of the solid-state detector, the authors compared the dose profiles to measurements made with a small volume ion chamber. To validate the overall method, the authors compared the CTDI{sub 100} calculated analytically to the measurement made with a 100 mm pencil ion chamber. Results: For the central and weighted dose profiles, the authors found a good

  19. Technical note: Electrocardiogram electrode repositioning for 320-row coronary CT angiography in patients with regular and recurrent premature ventricular contractions.

    PubMed

    Kondo, Takeshi; Matsutani, Hideyuki; Groarke, John; Takamura, Kazuhisa; Fujimoto, Shinichiro; Rybicki, Frank J; Kumamaru, Kanako K

    2014-01-01

    Arrhythmias can compromise image quality and increase radiation exposure during coronary CT angiography (CTA). However, premature ventricular contractions (PVCs) can occur in a predictable recurrent and regular pattern (ie, bigeminy, trigeminy, quadrigeminy) with post-PVC compensatory pauses. Electrocardiographic (ECG) electrode repositioning can achieve relative amplification of the R waves of PVCs compared with R waves of sinus beats. This technical note describes how simple ECG electrode repositioning, combined with an absolute-delay strategy, facilitated selective R waves of PVC ECG triggering of image acquisition in 6 patients with PVC bigeminy or quadrigeminy at the time of 320-row coronary CTA. All 6 studies were single heartbeat acquisition scans with excellent image quality and a median effective radiation dose of 2.9 mSv (interquartile range, 2.1-3.8 mSv). Standard ECG electrode positions used for 2 patients with PVC bigeminy undergoing coronary CTA were associated with an acquisition over 2 heartbeats and effective radiation doses of 6.8 and 10.3 mSv, respectively. In conclusion, ECG electrode repositioning combined with an absolute-delay strategy for regularly recurring PVCs, such as ventricular bigeminy, facilitates high image quality and lower radiation dose during coronary CTA. This simple and straightforward technique can be considered for all patients with regular and recurrent PVCs undergoing coronary CTA.

  20. Quantitative colorectal cancer perfusion measurement by multidetector-row CT: does greater tumour coverage improve measurement reproducibility?

    PubMed

    Goh, V; Halligan, S; Gartner, L; Bassett, P; Bartram, C I

    2006-07-01

    The purpose of this study was to determine if greater z-axis tumour coverage improves the reproducibility of quantitative colorectal cancer perfusion measurements using CT. A 65 s perfusion study was acquired following intravenous contrast administration in 10 patients with proven colorectal cancer using a four-detector row scanner. This was repeated within 48 h using identical technical parameters to allow reproducibility assessment. Quantitative tumour blood volume, blood flow, mean transit time and permeability measurements were determined using commercially available software (Perfusion 3.0; GE Healthcare, Waukesha, WI) for data obtained from a 5 mm z-axis tumour coverage, and from a 20 mm z-axis tumour coverage. Measurement reproducibility was assessed using Bland-Altman statistics, for a 5 mm z-axis tumour coverage, and 20 mm z-axis tumour coverage, respectively. The mean difference (95% limits of agreement) for blood volume, blood flow, mean transit time and permeability were 0.04 (-2.50 to +2.43) ml/100 g tissue; +8.80 (-50.5 to +68.0) ml/100 g tissue/min; -0.99 (-8.19 to +6.20) seconds; and +1.20 (-5.42 to +7.83) ml/100 g tissue/min, respectively, for a 5 mm coverage, and -0.04 (-2.61 to +2.53) ml/100 g tissue; +7.40 (-50.3 to +65.0) ml/100 g tissue/min; -2.46 (-12.61 to +7.69) seconds; and -0.23 (-8.31 to +7.85) ml/100 g tissue/min, respectively, for a 20 mm coverage, indicating similar levels of agreement. In conclusion, increasing z-axis coverage does not improve reproducibility of quantitative colorectal cancer perfusion measurements.

  1. Patient radiation dose in prospectively gated axial CT coronary angiography and retrospectively gated helical technique with a 320-detector row CT scanner

    SciTech Connect

    Seguchi, Shigenobu; Aoyama, Takahiko; Koyama, Shuji; Fujii, Keisuke; Yamauchi-Kawaura, Chiyo

    2010-11-15

    Purpose: The aim of this study was to evaluate radiation dose to patients undergoing computed tomography coronary angiography (CTCA) for prospectively gated axial (PGA) technique and retrospectively gated helical (RGH) technique. Methods: Radiation doses were measured for a 320-detector row CT scanner (Toshiba Aquilion ONE) using small sized silicon-photodiode dosimeters, which were implanted at various tissue and organ positions within an anthropomorphic phantom for a standard Japanese adult male. Output signals from photodiode dosimeters were read out on a personal computer, from which organ and effective doses were computed according to guidelines published in the International Commission on Radiological Protection Publication 103. Results: Organs that received high doses were breast, followed by lung, esophagus, and liver. Breast doses obtained with PGA technique and a phase window width of 16% at a simulated heart rate of 60 beats per minute were 13 mGy compared to 53 mGy with RGH technique using electrocardiographically dependent dose modulation at the same phase window width as that in PGA technique. Effective doses obtained in this case were 4.7 and 20 mSv for the PGA and RGH techniques, respectively. Conversion factors of dose length product to the effective dose in PGA and RGH were 0.022 and 0.025 mSv mGy{sup -1} cm{sup -1} with a scan length of 140 mm. Conclusions: CTCA performed with PGA technique provided a substantial effective dose reduction, i.e., 70%-76%, compared to RGH technique using the dose modulation at the same phase windows as those in PGA technique. Though radiation doses in CTCA with RGH technique were the same level as, or some higher than, those in conventional coronary angiography (CCA), the use of PGA technique reduced organ and effective doses to levels less than CCA except for breast dose.

  2. Influence of 320-detector-row volume scanning and AAPM report 111 CT dosimetry metrics on size-specific dose estimate: a Monte Carlo study.

    PubMed

    Haba, Tomonobu; Koyama, Shuji; Kinomura, Yutaka; Ida, Yoshihiro; Kobayashi, Masanao

    2016-09-01

    The American Association of Physicists in Medicine (AAPM) task group 204 has recommended the use of size-dependent conversion factors to calculate size-specific dose estimate (SSDE) values from volume computed tomography dose index (CTDIvol) values. However, these conversion factors do not consider the effects of 320-detector-row volume computed tomography (CT) examinations or the new CT dosimetry metrics proposed by AAPM task group 111. This study aims to investigate the influence of these examinations and metrics on the conversion factors reported by AAPM task group 204, using Monte Carlo simulations. Simulations were performed modelling a Toshiba Aquilion ONE CT scanner, in order to compute dose values in water for cylindrical phantoms with 8-40-cm diameters at 2-cm intervals for each scanning parameter (tube voltage, bow-tie filter, longitudinal beam width). Then, the conversion factors were obtained by applying exponential regression analysis between the dose values for a given phantom diameter and the phantom diameter combined with various scanning parameters. The conversion factors for each scanning method (helical, axial, or volume scanning) and CT dosimetry method (i.e., the CTDI100 method or the AAPM task group 111 method) were in agreement with those reported by AAPM task group 204, within a percentage error of 14.2 % for phantom diameters ≥11.2 cm. The results obtained in this study indicate that the conversion factors previously presented by AAPM task group 204 can be used to provide appropriate SSDE values for 320-detector-row volume CT examinations and the CT dosimetry metrics proposed by the AAPM task group 111.

  3. Influence of 320-detector-row volume scanning and AAPM report 111 CT dosimetry metrics on size-specific dose estimate: a Monte Carlo study.

    PubMed

    Haba, Tomonobu; Koyama, Shuji; Kinomura, Yutaka; Ida, Yoshihiro; Kobayashi, Masanao

    2016-09-01

    The American Association of Physicists in Medicine (AAPM) task group 204 has recommended the use of size-dependent conversion factors to calculate size-specific dose estimate (SSDE) values from volume computed tomography dose index (CTDIvol) values. However, these conversion factors do not consider the effects of 320-detector-row volume computed tomography (CT) examinations or the new CT dosimetry metrics proposed by AAPM task group 111. This study aims to investigate the influence of these examinations and metrics on the conversion factors reported by AAPM task group 204, using Monte Carlo simulations. Simulations were performed modelling a Toshiba Aquilion ONE CT scanner, in order to compute dose values in water for cylindrical phantoms with 8-40-cm diameters at 2-cm intervals for each scanning parameter (tube voltage, bow-tie filter, longitudinal beam width). Then, the conversion factors were obtained by applying exponential regression analysis between the dose values for a given phantom diameter and the phantom diameter combined with various scanning parameters. The conversion factors for each scanning method (helical, axial, or volume scanning) and CT dosimetry method (i.e., the CTDI100 method or the AAPM task group 111 method) were in agreement with those reported by AAPM task group 204, within a percentage error of 14.2 % for phantom diameters ≥11.2 cm. The results obtained in this study indicate that the conversion factors previously presented by AAPM task group 204 can be used to provide appropriate SSDE values for 320-detector-row volume CT examinations and the CT dosimetry metrics proposed by the AAPM task group 111. PMID:27444155

  4. First-pass perfusion imaging of solitary pulmonary nodules with 64-detector row CT: comparison of perfusion parameters of malignant and benign lesions.

    PubMed

    Li, Y; Yang, Z-G; Chen, T-W; Yu, J-Q; Sun, J-Y; Chen, H-J

    2010-09-01

    The purpose of this study was to determine the usefulness of first-pass whole nodule perfusion imaging in the differentiation of benign and malignant solitary pulmonary nodules (SPNs). 77 patients with non-calcified SPNs (46 malignant, 22 benign and 9 active inflammatory) underwent first-pass perfusion imaging with a 64-detector row CT scanner. Perfusion, peak enhancement intensity (PEI), time to peak (TTP) and blood volume (BV) were measured and statistically compared among different groups. Mean perfusion, PEI and BV for benign SPNs were significantly lower than those for malignant nodules (p<0.05) and active infections (p<0.05), but the differences were not statistically significant between malignant tumours and active infections (p>0.05). Receiver operating characteristic (ROC) curve analysis showed that SPNs with perfusion greater than 30.6 ml min(-1) ml(-1), PEI higher than 23.3 HU or BV larger than 12.2 ml per 100 g were more likely to be malignant. In conclusion, first-pass perfusion imaging with 64-detector row CT is a feasible way of assessing whole nodule perfusion and helpful in differentiating benign from malignant SPNs.

  5. Coronary artery bypass graft flow: qualitative evaluation with cine single-detector row CT and comparison with findings at angiography.

    PubMed

    Tello, Richard; Hartnell, George G; Costello, Philip; Ecker, Christian P

    2002-09-01

    A four-point ordinal-scale qualitative flow index was used for assessment of patency of 75 coronary artery bypass grafts in 26 patients examined with spiral computed tomography (CT). CT findings were compared with selective graft angiographic findings. Of 54 open grafts, 52 were patent at initial selective graft angiography and 50 were patent at spiral CT; accuracy rates were 97% (73 of 75) and 95% (71 of 75), respectively. Spiral CT flow index agreed with angiographically determined flow in 85% (95% CI: 0.77, 0.93) of grafts. The kappa statistic demonstrated very good to excellent intermodality (0.75) and interobserver (0.89) agreement. Spiral CT may be a feasible means of assessing quality of flow in bypass grafts. PMID:12202732

  6. Rowing Injuries

    PubMed Central

    Hosea, Timothy M.; Hannafin, Jo A.

    2012-01-01

    Context: Rowing is one of the original modern Olympic sports and was one of the most popular spectator sports in the United States. Its popularity has been increasing since the enactment of Title IX. The injury patterns in this sport are unique because of the stress applied during the rowing stroke. Evidence Acquisition: This review summarizes the existing literature describing the biomechanics of the rowing stroke and rowing-related injury patterns. Data were obtained from previously published peer-reviewed literature through a search of the entire PubMed database (up to December, 2011) as well as from textbook chapters and rowing coaching manuals. Results: Rowing injuries are primarily overuse related. The knee, lumbar spine, and ribs are most commonly affected. The injury incidence is directly related to the volume of training and technique. Conclusion: Familiarity of the injury patterns and the biomechanical forces affecting the rowing athlete will aid in prompt diagnosis and appropriate management. PMID:23016093

  7. Rowing Physiology.

    ERIC Educational Resources Information Center

    Spinks, W. L.

    This review of the literature discusses and examines the methods used in physiological assessment of rowers, results of such assessments, and future directions emanating from research in the physiology of rowing. The first section discusses the energy demands of rowing, including the contribution of the energy system, anaerobic metabolism, and the…

  8. CT features and common causes of arc of Riolan expansion: an analysis with 64-detector-row computed tomographic angiography

    PubMed Central

    Xie, Yuanliang; Jin, Chaolin; Zhang, Shutong; Wang, Xiang; Jiang, Yanping

    2015-01-01

    Objective: To study the manifestations of arc of Riolan expansion (ARE) using multi-detector computed tomography angiography (MDCTA). Materials and methods: The manifestations and clinical data of 626 consecutive mesentery CTA images were retrospectively analyzed. The 47 cases with ARE and 47 patients without expansion were involved. The average diameter of arc of Riolan was measured. Two radiologists after reaching consensus analyzed the shapes of mesenteric artery, CT findings and the occurrence and causes of ARE. Results: The mean diameter of arc of Riolan was 1.2 mm, 4.6 mm, 2.5 mm, 2.3 mm, 1.9 mm, 2.5 mm, and 2.0 mm at baseline and following obstruction of superior mesenteric artery (SMA), stenosis of SMA, obstruction of inferior mesenteric artery (IMA), stenosis of IMA, colon cancer, and active ulcerative colitis, respectively. The expansion of arc of Riolan was the most significant following obstruction of SMA. The diameters of arc of Riolan were significantly different between the upward flow group and the downward or the two-way flow groups, and between the colon tumor group and the active ulcerative colitis group. CT findings such as bowel wall thickening, contrast enhancement, intestinal obstruction, marginal artery expansion, lymph node enlargement varied and were help to identify the cause of ARE. Conclusions: ARE often suggests the occurrence of obstructed intestinal feeding artery or intestinal lesions. MDCTA can clearly display the situation of arc of Riolan and collateral circulation, and together with CT symptoms, can guide the selection of diagnosis and treatment schemes in clinic. PMID:26064208

  9. Relationship between beat to beat coronary artery motion and image quality in prospectively ECG-gated two heart beat 320-detector row coronary CT angiography.

    PubMed

    Tomizawa, Nobuo; Komatsu, Shuhei; Akahane, Masaaki; Torigoe, Rumiko; Kiryu, Shigeru; Ohtomo, Kuni

    2012-01-01

    The objective was to investigate the influence of the beat-to-beat movement of the coronary arteries on image quality of multi-segment reconstruction (MSR) images. Although MSR improves temporal resolution, image quality would be degraded by beat-to-beat movement of the coronary arteries. In a retrospectively review, 18 patients (mean age, 67.0 years) who underwent coronary CT angiography using a 320-detector row CT were included. The displacement and diameter of coronary artery segments for each of the identified nine landmarks was recorded. The motion ratio was calculated as the division of displacement by diameter. Image quality (IQ) was graded by a four-point scale. The correlation between MSR IQ score and the motion ratio showed stronger negative correlation than that between MSR IQ score and the displacement (r = -0.54 vs. r = -0.36). The average motion ratio for segments in which half-scan reconstruction (HSR) IQ was better than MSR IQ (29.1%, group A) was higher than that for segments in which MSR IQ was better than HSR IQ (16.0%, group C). The motion ratio in group C was lower than 25%. Difference in IQ scores of the HSR images was more frequent in group A than in the remaining segments in which the motion ratio was lower than 25% (16.7% vs. 66.0%; P < 0.0002). The motion ratio could be a better index than the displacement to evaluate the influence of the motion of coronary arteries on image quality. MSR images would be impaired by a motion ratio larger than 25%. Image impairment of one of the HSR images might also impair MSR images.

  10. Suicide on death row.

    PubMed

    Lester, David; Tartaro, Christine

    2002-09-01

    The suicide rate on death row for the period 1976 through 1999 was found to be high (113 per 100,000 per year), some five times higher than the suicide rate for the male population of the United States. The death row suicide rate was predicted by features of the death row population (negatively with the population on death row) and by social indicators of the society as a whole (negatively with birth and divorce rates and positively with marriage rates).

  11. Designing ROW Methods

    NASA Technical Reports Server (NTRS)

    Freed, Alan D.

    1996-01-01

    There are many aspects to consider when designing a Rosenbrock-Wanner-Wolfbrandt (ROW) method for the numerical integration of ordinary differential equations (ODE's) solving initial value problems (IVP's). The process can be simplified by constructing ROW methods around good Runge-Kutta (RK) methods. The formulation of a new, simple, embedded, third-order, ROW method demonstrates this design approach.

  12. Row fault detection system

    SciTech Connect

    Archer, Charles Jens; Pinnow, Kurt Walter; Ratterman, Joseph D.; Smith, Brian Edward

    2008-10-14

    An apparatus, program product and method checks for nodal faults in a row of nodes by causing each node in the row to concurrently communicate with its adjacent neighbor nodes in the row. The communications are analyzed to determine a presence of a faulty node or connection.

  13. Row fault detection system

    DOEpatents

    Archer, Charles Jens; Pinnow, Kurt Walter; Ratterman, Joseph D.; Smith, Brian Edward

    2010-02-23

    An apparatus and program product check for nodal faults in a row of nodes by causing each node in the row to concurrently communicate with its adjacent neighbor nodes in the row. The communications are analyzed to determine a presence of a faulty node or connection.

  14. Row fault detection system

    DOEpatents

    Archer, Charles Jens; Pinnow, Kurt Walter; Ratterman, Joseph D.; Smith, Brian Edward

    2012-02-07

    An apparatus, program product and method check for nodal faults in a row of nodes by causing each node in the row to concurrently communicate with its adjacent neighbor nodes in the row. The communications are analyzed to determine a presence of a faulty node or connection.

  15. INTERIOR SECOND FLOOR EAST END LOOKING WEST AT NORTH ROW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR SECOND FLOOR- EAST END LOOKING WEST AT NORTH ROW OF MUSHROOM COLUMNS. - Colt Fire Arms Company, South Armory Building, 36-150 Huyshope Avenue, 17-170 Van Dyke Avenue, 49 Vredendale Avenue, Hartford, Hartford County, CT

  16. INTERIOR, SOUTH PART, CAMERA FACING SOUTHWEST. DOUBLE ROW OF CENTER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR, SOUTH PART, CAMERA FACING SOUTHWEST. DOUBLE ROW OF CENTER COLUMNS REFLECTS SOUTH PART'S RE-USE OF ANOTHER BUILDING'S STRUCTURAL FRAME. - New Haven Rail Yard, Work Equipment Shop, Vicinity of Cedar & Lamberton Streets, New Haven, New Haven County, CT

  17. 4. VIEW NORTHWEST, INTERIOR OF GATEHOUSE, SHOWING ROW OF GATE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW NORTHWEST, INTERIOR OF GATEHOUSE, SHOWING ROW OF GATE OPERATING MECHANISMS; HEIGHT OF STEMS INDICATES FOREGROUND GATE IS OPEN - Norwich Water Power Company, Headgates, West bank of Shetucket River opposite Fourteenth Street, Greenville section, Norwich, New London County, CT

  18. Transcatheter Arterial Embolization Therapy for a Hypoplastic Pelvic Kidney with a Single Vaginal Ectopic Ureter to Control Incontinence: The Usefulness of Three-Dimensional CT Angiography Using Multidetector-Row Helical CT

    SciTech Connect

    Kudoh, Kouichi Kadota, Masataka; Nakayama, Yoshiharu; Imuta, Masanori; Yasuda, Tsuyoshi; Yamashita, Yasuyuki; Inadome, Akito; Yoshida, Masaki; Ueda, Shouichi

    2003-09-15

    A girl with continuous urinary incontinence was successfully treated by angiographic embolization of a hypoplastic pelvic kidney with a single unilateral vaginal ectopic opening of the ureter. For this intervention, CT angiography was useful for detecting the corresponding renal artery of the hypoplastic kidney.

  19. The Impact of Different Levels of Adaptive Iterative Dose Reduction 3D on Image Quality of 320-Row Coronary CT Angiography: A Clinical Trial

    PubMed Central

    Feger, Sarah; Rief, Matthias; Zimmermann, Elke; Martus, Peter; Schuijf, Joanne Désirée; Blobel, Jörg; Richter, Felicitas; Dewey, Marc

    2015-01-01

    Purpose The aim of this study was the systematic image quality evaluation of coronary CT angiography (CTA), reconstructed with the 3 different levels of adaptive iterative dose reduction (AIDR 3D) and compared to filtered back projection (FBP) with quantum denoising software (QDS). Methods Standard-dose CTA raw data of 30 patients with mean radiation dose of 3.2 ± 2.6 mSv were reconstructed using AIDR 3D mild, standard, strong and compared to FBP/QDS. Objective image quality comparison (signal, noise, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), contour sharpness) was performed using 21 measurement points per patient, including measurements in each coronary artery from proximal to distal. Results Objective image quality parameters improved with increasing levels of AIDR 3D. Noise was lowest in AIDR 3D strong (p≤0.001 at 20/21 measurement points; compared with FBP/QDS). Signal and contour sharpness analysis showed no significant difference between the reconstruction algorithms for most measurement points. Best coronary SNR and CNR were achieved with AIDR 3D strong. No loss of SNR or CNR in distal segments was seen with AIDR 3D as compared to FBP. Conclusions On standard-dose coronary CTA images, AIDR 3D strong showed higher objective image quality than FBP/QDS without reducing contour sharpness. Trial Registration Clinicaltrials.gov NCT00967876 PMID:25945924

  20. 32. TYPICAL BRYANT ITEMS FROM THE 1930S; TOP ROW LEFT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. TYPICAL BRYANT ITEMS FROM THE 1930S; TOP ROW LEFT TO RIGHT: PORCELAIN CASED SWITCH, ROTARY SWITCH, SHORTING PLUG TO BYPASS FUSE; SECOND ROW: BRASS INCANDESCENT LAMP SURFACE RECEPTACLE, INCANDESCENT LAMPHOLDER WITH ADAPTER FOR GLASS GLOBE; THIRD ROW: PORCELAIN BASE ROTARY SWITCH, APPLIANCE BREAKER WITH COVER REMOVED, APPLIANCE BREAKER - Bryant Electric Company, 1421 State Street, Bridgeport, Fairfield County, CT

  1. SUICIDE ON DEATH ROW.

    PubMed

    Tartaro, Christine; Lester, David

    2015-12-01

    For the period 1976-2011, the suicide rate on death rows in the United States was only weakly (and non-significantly) associated with the marriage, birth, divorce, and unemployment rates in the general population. Possible explanations for why social indicators in the larger society might be associated with the behavior of prisoners on death row were discussed. PMID:26595302

  2. Biomechanics of Rowing

    NASA Astrophysics Data System (ADS)

    Hase, Kazunori; Kaya, Motoshi; Yamazaki, Nobutoshi; Andrews, Brian J.; Zavatsky, Amy B.; Halliday, Suzanne E.

    Compared with the other exercise, such as walking and cycling, rowing was expected to have some fitness advantage, while there were some misgivings about the risk of injury. The objectives of this study were to quantify biomechanical characteristics of rowing for fitness and rehabilitation and to offer normative data for the prevention of injury and for determining effective exercise. An experiment was performed to collect the kinematic and kinetic data during rowing by experienced and non-experienced subjects. A three-dimensional whole-body musculo-skeletal model was used to calculate the biomechanical loads, such as the joint moments, the muscular tensions, the joint contact forces and the energy consumption. The results of this study indicate that rowing is an effective exercise for rehabilitation and fitness. However, the non-experienced rower should acquire considerable skill to obtain sufficient exercise. The rowing cadence should be decided according to the purpose of the exercise.

  3. Scottish Short Stone Rows

    NASA Astrophysics Data System (ADS)

    Ruggles, Clive L. N.

    Short stone rows received a good deal of attention during the 1980s and 1990s, at a time when archaeoastronomy in prehistoric Britain and Ireland was moving beyond reassessments of Alexander Thom's "megalithic observatories" by identifying coherent groups of similar monuments with clear orientation trends. Many such rows are found in western Scotland, with the main concentration in Argyll and the island of Mull. Systematic analyses of their orientations produced credible evidence of an awareness of the 18.6-year lunar node cycle, within a "primary-secondary" pattern whereby isolated rows were oriented close to moonrise or moonset at the southern major standstill limit, while others oriented in this way were accompanied by a second row oriented in a declination range that could be interpreted either as lunar or solar. A detailed investigation of the landscape situation of the sites in northern Mull, accompanied by excavations at two of the sites, suggested that they were deliberately placed in locations where critical moonsets would be seen against prominent distant landscape features, but where the distant horizon in most or all other directions was hidden from view. A lack of independent archaeological evidence may help to explain why archaeoastronomical investigations at short stone rows have never progressed beyond "data-driven" studies of orientations and landscape situation. Nonetheless, the work that was done at these sites raised important general methodological issues, and pioneered techniques, that remain relevant across archaeoastronomy today.

  4. Psychiatry on death row.

    PubMed

    Hussain, A H; Tozman, S

    1978-03-01

    The authors present the personal experiences of an attending physician in a Death Row in Ceylon (Sri-Lanka). Aspects of the execution scenario are presented and discussed with its implications for the protagonists: the condemned, witnesses, standers-by, authorities and society-at large.

  5. Rowing competitions and perspective

    NASA Astrophysics Data System (ADS)

    Flores, Alfinio; Bernhardt, Stephen A.; Shipman, Henry L.

    2015-02-01

    This paper is about integrating the use of graphing technology (specifically, GeoGebra) with principles of motion, principles of perspective, and the concept of vanishing points to model a dynamic event. Students were asked to analyse video images of a rowing competition filmed with a single camera positioned perpendicular to the race. The fixed position of the camera in such races makes it difficult to determine whether a scull closer to the camera is actually overtaking another, more distant scull. The paper illustrates how students in their first year at the university can integrate the use of technology, science, mathematics, and writing to solve a real world problem involving motion.

  6. Wide row spacing in Louisiana sugarcane

    Technology Transfer Automated Retrieval System (TEKTRAN)

    There is growing interest in the Louisiana sugarcane industry for a wider 8 foot row spacing than the conventional 6 foot row spacing. The wide row provides room for two drills of cane about 30 inches apart on each row. This type of wide row spacing lowers acre-feet from 7260 to 5445, thus reducing ...

  7. The Demise of Skid Row.

    ERIC Educational Resources Information Center

    Siegal, Harvey A.; Inciardi, James A.

    1982-01-01

    Describes the history and evolution of the American skid row; analyzes the changes it has undergone, particularly in the face of urban renewal; and speculates on its future. Includes opinions of the inhabitants of skid row which were obtained from interviews. (MJL)

  8. Louisiana farm discussion: 8 foot row spacing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This year several tests in growers’ fields were used to compare traditional 6-foot row spacing to 8-foot row spacing. Cane is double-drilled in the wider row spacing. The wider row spacing would accommodate John Deere 3522 harvester. Field data indicate the sugarcane yields are very comparable in 8-...

  9. Image quality and radiation reduction of 320-row area detector CT coronary angiography with optimal tube voltage selection and an automatic exposure control system: comparison with body mass index-adapted protocol.

    PubMed

    Lim, Jiyeon; Park, Eun-Ah; Lee, Whal; Shim, Hackjoon; Chung, Jin Wook

    2015-06-01

    To assess the image quality and radiation exposure of 320-row area detector computed tomography (320-ADCT) coronary angiography with optimal tube voltage selection with the guidance of an automatic exposure control system in comparison with a body mass index (BMI)-adapted protocol. Twenty-two patients (study group) underwent 320-ADCT coronary angiography using an automatic exposure control system with the target standard deviation value of 33 as the image quality index and the lowest possible tube voltage. For comparison, a sex- and BMI-matched group (control group, n = 22) using a BMI-adapted protocol was established. Images of both groups were reconstructed by an iterative reconstruction algorithm. For objective evaluation of the image quality, image noise, vessel density, signal to noise ratio (SNR), and contrast to noise ratio (CNR) were measured. Two blinded readers then subjectively graded the image quality using a four-point scale (1: nondiagnostic to 4: excellent). Radiation exposure was also measured. Although the study group tended to show higher image noise (14.1 ± 3.6 vs. 9.3 ± 2.2 HU, P = 0.111) and higher vessel density (665.5 ± 161 vs. 498 ± 143 HU, P = 0.430) than the control group, the differences were not significant. There was no significant difference between the two groups for SNR (52.5 ± 19.2 vs. 60.6 ± 21.8, P = 0.729), CNR (57.0 ± 19.8 vs. 67.8 ± 23.3, P = 0.531), or subjective image quality scores (3.47 ± 0.55 vs. 3.59 ± 0.56, P = 0.960). However, radiation exposure was significantly reduced by 42 % in the study group (1.9 ± 0.8 vs. 3.6 ± 0.4 mSv, P = 0.003). Optimal tube voltage selection with the guidance of an automatic exposure control system in 320-ADCT coronary angiography allows substantial radiation reduction without significant impairment of image quality, compared to the results obtained using a BMI-based protocol. PMID:25604967

  10. Image quality and radiation reduction of 320-row area detector CT coronary angiography with optimal tube voltage selection and an automatic exposure control system: comparison with body mass index-adapted protocol.

    PubMed

    Lim, Jiyeon; Park, Eun-Ah; Lee, Whal; Shim, Hackjoon; Chung, Jin Wook

    2015-06-01

    To assess the image quality and radiation exposure of 320-row area detector computed tomography (320-ADCT) coronary angiography with optimal tube voltage selection with the guidance of an automatic exposure control system in comparison with a body mass index (BMI)-adapted protocol. Twenty-two patients (study group) underwent 320-ADCT coronary angiography using an automatic exposure control system with the target standard deviation value of 33 as the image quality index and the lowest possible tube voltage. For comparison, a sex- and BMI-matched group (control group, n = 22) using a BMI-adapted protocol was established. Images of both groups were reconstructed by an iterative reconstruction algorithm. For objective evaluation of the image quality, image noise, vessel density, signal to noise ratio (SNR), and contrast to noise ratio (CNR) were measured. Two blinded readers then subjectively graded the image quality using a four-point scale (1: nondiagnostic to 4: excellent). Radiation exposure was also measured. Although the study group tended to show higher image noise (14.1 ± 3.6 vs. 9.3 ± 2.2 HU, P = 0.111) and higher vessel density (665.5 ± 161 vs. 498 ± 143 HU, P = 0.430) than the control group, the differences were not significant. There was no significant difference between the two groups for SNR (52.5 ± 19.2 vs. 60.6 ± 21.8, P = 0.729), CNR (57.0 ± 19.8 vs. 67.8 ± 23.3, P = 0.531), or subjective image quality scores (3.47 ± 0.55 vs. 3.59 ± 0.56, P = 0.960). However, radiation exposure was significantly reduced by 42 % in the study group (1.9 ± 0.8 vs. 3.6 ± 0.4 mSv, P = 0.003). Optimal tube voltage selection with the guidance of an automatic exposure control system in 320-ADCT coronary angiography allows substantial radiation reduction without significant impairment of image quality, compared to the results obtained using a BMI-based protocol.

  11. Alcoholic Women on Skid Row.

    ERIC Educational Resources Information Center

    Anderson, Sandra C.

    1987-01-01

    Examined women (N=20) who were receiving alcoholism treatment in the skid-row area of Portland, Oregon. Women had histories of problem drinking and extensive treatment for alcoholism. Most had been married and had children. Despite transiency, the majority maintained contact with friends and relatives. Compared these women to New York City's…

  12. Mechanical performance of aquatic rowing and flying.

    PubMed Central

    Walker, J A; Westneat, M W

    2000-01-01

    Aquatic flight, performed by rowing or flapping fins, wings or limbs, is a primary locomotor mechanism for many animals. We used a computer simulation to compare the mechanical performance of rowing and flapping appendages across a range of speeds. Flapping appendages proved to be more mechanically efficient than rowing appendages at all swimming speeds, suggesting that animals that frequently engage in locomotor behaviours that require energy conservation should employ a flapping stroke. The lower efficiency of rowing appendages across all speeds begs the question of why rowing occurs at all. One answer lies in the ability of rowing fins to generate more thrust than flapping fins during the power stroke. Large forces are necessary for manoeuvring behaviours such as accelerations, turning and braking, which suggests that rowing should be found in slow-swimming animals that frequently manoeuvre. The predictions of the model are supported by observed patterns of behavioural variation among rowing and flapping vertebrates. PMID:11052539

  13. Bilateral Second Carpal Row Duplication Associated with Multiple Epiphyseal Dysplasia.

    PubMed

    Cladiere-Nassif, Victoire; Delaroche, Caroline; Pottier, Edwige; Feron, Jean-Marc

    2015-11-01

    We report a case of a 75-year-old woman presenting a hitherto undescribed condition of bilateral second carpal row duplication. She was diagnosed in childhood with both Marfan and Ehlers-Danlos syndromes, with no clear evidence and no further medical follow-up. She presented throughout her life with various articular symptoms, which appeared to be compatible with a diagnosis of multiple epiphyseal dysplasia, and underwent several surgical procedures on her knees and hips. Most recently, she was reporting pain at the base of the fifth metacarpal bone of the left hand. X-ray images and computed tomography (CT) were obtained for exploration and showed a total second row duplication in both carpi, with a total number of 18 carpal bones in each wrist. PMID:26649258

  14. Comparison of the Diagnostic Image Quality of the Canine Maxillary Dentoalveolar Structures Obtained by Cone Beam Computed Tomography and 64-Multidetector Row Computed Tomography.

    PubMed

    Soukup, Jason W; Drees, Randi; Koenig, Lisa J; Snyder, Christopher J; Hetzel, Scott; Miles, Chanda R; Schwarz, Tobias

    2015-01-01

    The objective of this blinded study was to validate the use of cone beam computed tomography (C) for imaging of the canine maxillary dentoalveolar structures by comparing its diagnostic image quality with that of 64-multidetector row CT Sagittal slices of a tooth-bearing segment of the maxilla of a commercially purchased dog skull embedded in methylmethacrylate were obtained along a line parallel with the dental arch using a commercial histology diamond saw. The slice of tooth-bearing bone that best depicted the dentoalveolar structures was chosen and photographed. The maxillary segment was imaged with cone beam CT and 64-multidetector row CT. Four blinded evaluators compared the cone beam CT and 64-multidetector row CT images and image quality was scored as it related to the anatomy of dentoalveolar structures. Trabecular bone, enamel, dentin, pulp cavity, periodontal ligament space, and lamina dura were scored In addition, a score depicting the evaluators overall impression of the image was recorded. Images acquired with cone beam CT were found to be significantly superior in image quality to images acquired with 64-multidetector row CT overall, and in all scored categories. In our study setting cone beam CT was found to be a valid and clinically superior imaging modality for the canine maxillary dentoalveolar structures when compared to 64-multidetector row CT. PMID:26415384

  15. Billet planting, 8-foot rows, residue updates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Cultural practices are continually tested and upgraded to maximize sugarcane yield in Louisiana. Over the past 3 years extensive research went in to comparing the industry standard 6-foot row spacing to a wider, 8 foot row. Each 8 foot row was double drilled with seed canes that were 2-3 feet apart....

  16. Chlamydomonas flagellar outer row dynein assembly protein ODA7 interacts with both outer row and I1 inner row dyneins.

    PubMed

    Freshour, Judy; Yokoyama, Ruth; Mitchell, David R

    2007-02-23

    We previously found that a mutation at the ODA7 locus in Chlamydomonas prevents axonemal outer row dynein assembly by blocking association of heavy chains and intermediate chains in the cytoplasm. We have now cloned the ODA7 locus by walking in the Chlamydomonas genome from nearby molecular markers, confirmed the identity of the gene by rescuing the mutant phenotype with genomic clones, and identified the ODA7 gene product as a 58-kDa leucine-rich repeat protein unrelated to outer row dynein LC1. Oda7p is missing from oda7 mutant flagella but is present in flagella of other outer row or inner row dynein assembly mutants. However, Oda7 levels are greatly reduced in flagella that lack both outer row dynein and inner row I1 dynein. Biochemical fractionation and rebinding studies support a model in which Oda7 participates in a previously uncharacterized structural link between inner and outer row dyneins.

  17. Multidetector-row computed tomography in cerebral hydatid cyst

    PubMed Central

    Wani, Nisar A; Kosar, Tasleem L; Khan, Abdul Qayum; Ahmad, Sheikh Shahnawaz

    2010-01-01

    Intracranial localization is a rare manifestation of hydatid cyst disease (Echinococcosis). It comprises only 2% of cases of Echinococcosis infection even in endemic areas and is predominantly seen in children. Clinical manifestations resulting from raised intracranial tension are nonspecific. Imaging with computed tomography (CT) may suggest the diagnosis preoperatively with reasonable accuracy. Multidetector-row CT (MDCT) with its high resolution multiplanar reformations can demonstrate the relationship of the cyst with adjacent brain structures and thus help in planning surgery. This has a practical utility in places where magnetic resonance imaging is not available. We describe a case of cerebral hydatid cyst in a 13-year-old boy who was diagnosed with MDCT, which helped in planning its surgical removal. PMID:21808517

  18. Clinical application of 320-row multidetector computed tomography for a dynamic three-dimensional vascular study: imaging findings and initial experience.

    PubMed

    Nagamatsu, Shogo; Nakagawa, Masahiro; Kayano, Shuji; Koizumi, Takuya; Akazawa, Satoshi; Onitsuka, Tetsuro; Iida, Yoshiyuki; Endo, Masahiro; Nakaya, Yoshihiro; Urikura, Atsushi

    2010-10-01

    The 320-row multidetector computed tomography (MDCT) is now used by both cardiologists and neurosurgeons. It enables dynamic 3D-CT angiography, because the wide-area detector eliminates helical scanning, thus achieving very fast scanning times for single 3D-CT volume data. Some microvascular surgeons are familiar with 64-row MDCT for perforator studies, but there are few reports of studies using 320-row MDCT. This MDCT system was used to follow the dynamic blood flow of small vessels. It is considered to have a great potential in the clinical field of microvascular surgery. PMID:20399163

  19. State-of-the-art in CT hardware and scan modes for cardiovascular CT

    PubMed Central

    Halliburton, Sandra; Arbab-Zadeh, Armin; Dey, Damini; Einstein, Andrew J.; Gentry, Ralph; George, Richard T.; Gerber, Thomas; Mahesh, Mahadevappa; Weigold, Wm. Guy

    2013-01-01

    Multidetector row computed tomography (CT) allows noninvasive anatomic and functional imaging of the heart, great vessels, and the coronary arteries. In recent years, there have been several advances in CT hardware, which have expanded the clinical utility of CT for cardiovascular imaging; such advances are ongoing. This review article from the Society of Cardiovascular Computed Tomography (SCCT) Basic and Emerging Sciences and Technology (BEST) Working Group summarizes the technical aspects of current state-of-the-art CT hardware and describes the scan modes this hardware supports for cardiovascular CT imaging. PMID:22551595

  20. Setting up a Death Row Psychiatry Program.

    PubMed

    Yanofski, Jason

    2011-02-01

    Death row psychiatry contains a complex set of clinical, ethical, and legal questions. This Forensic Files column makes a case for correctional institutions starting death row programs to address these issues through uniform policies. A list of the relevant issues is provided. Specific issues discussed include death row psychiatric assessment, considering "justifiable" depression, treating for competency to be executed, and balancing boundaries between clinical and forensic work.

  1. Setting up a Death Row Psychiatry Program.

    PubMed

    Yanofski, Jason

    2011-02-01

    Death row psychiatry contains a complex set of clinical, ethical, and legal questions. This Forensic Files column makes a case for correctional institutions starting death row programs to address these issues through uniform policies. A list of the relevant issues is provided. Specific issues discussed include death row psychiatric assessment, considering "justifiable" depression, treating for competency to be executed, and balancing boundaries between clinical and forensic work. PMID:21468293

  2. On Row Rank Equal Column Rank

    ERIC Educational Resources Information Center

    Khalili, Parviz

    2009-01-01

    We will prove a well-known theorem in Linear Algebra, that is, for any "m x n" matrix the dimension of row space and column space are the same. The proof is based on the subject of "elementary matrices" and "reduced row-echelon" form of a matrix.

  3. Rows=Wildlife Corridors: An Urban Resource.

    ERIC Educational Resources Information Center

    Young, Darrell D.

    1983-01-01

    Linear strips of land associated with highways, electrical transmission lines, gas/oil pipelines (called right-of-way or ROWs) are inhibited by a variety of wildlife and offer a unique opportunity to study the wildlife in the urban setting. Types of wildlife found in and importance of ROWs are discussed. (JN)

  4. Memory hierarchy using row-based compression

    DOEpatents

    Loh, Gabriel H.; O'Connor, James M.

    2016-10-25

    A system includes a first memory and a device coupleable to the first memory. The device includes a second memory to cache data from the first memory. The second memory includes a plurality of rows, each row including a corresponding set of compressed data blocks of non-uniform sizes and a corresponding set of tag blocks. Each tag block represents a corresponding compressed data block of the row. The device further includes decompression logic to decompress data blocks accessed from the second memory. The device further includes compression logic to compress data blocks to be stored in the second memory.

  5. CT -- Body

    MedlinePlus

    ... News Physician Resources Professions Site Index A-Z Computed Tomography (CT) - Body Computed tomography (CT) of the body uses special x-ray ... Body? What is CT Scanning of the Body? Computed tomography, more commonly known as a CT or CAT ...

  6. Developing Formulas by Skipping Rows in Pascal's Triangle

    ERIC Educational Resources Information Center

    Buonpastore, Robert J.; Osler, Thomas J.

    2007-01-01

    A table showing the first thirteen rows of Pascal's triangle, where the rows are, as usual numbered from 0 to 12 is presented. The entries in the table are called binomial coefficients. In this note, the authors systematically delete rows from Pascal's triangle and, by trial and error, try to find a formula that allows them to add new rows to the…

  7. Management controls on nitrous oxide emissions from row crop agriculture

    NASA Astrophysics Data System (ADS)

    Gelfand, I.; Shcherbak, I.; Millar, N.; Robertson, G. P.

    2011-12-01

    Agriculture is a significant source of the potent greenhouse gas (GHG) nitrous oxide (N2O), accounting for ~70% of total anthropic N2O emissions in the US primarily as a result of N fertilizer application. Emissions of N2O are the largest contributor to the global warming potential of row-crop agriculture. Management, including choice of crop type and rotation strongly impacts N2O emissions, but continuous emissions data from row-crops over multiple rotations are lacking. Empirical quantification of these long-term emissions and the development of crop- and rotation-specific N2O emission factors are vital for improving estimates of agricultural GHG emissions, important for informing management practices to reduce agriculture's GHG footprint, and developing mitigation protocols for environmental markets. Over 20 years we measured soil N2O emissions and calculated crop and management specific emission factors in four continuous rotations of corn (Zea mays) - soybean (Glycine max) - wheat (Triticum aestivum) under conventional tillage (CT), zero tillage (NT), low chemical input (LI), and biologically (Org) based management. Two of these systems (LI and Org) included winter cover crops, red clover (Trifolium pratense) or ray (Secale cereale). While average soil N2O fluxes in all systems where similar (2.9±0.2 to 3.8±0.5 g N2O-N ha-1 d-1), there was a significant interaction of total emissions with crop and phase. Surprisingly, the lowest total emissions from the corn period of the rotation were from CT, and the highest from LI, with 608±4 and 983±8 g N2O-N ha-1 crop year-1, respectively. Total emissions during the wheat period of the rotation showed the opposite trend, with total emissions of 942±7 and 524±38 g N2O-N ha-1 crop year-1, for CT ant LI, respectively. Total emissions from the soybean period of the rotation were highest under NT and lowest under CT management (526±5 and 296±2 g N2O-N ha-1 crop year-1, respectively). Emission efficiency, N2O emitted

  8. Comparisons of single-row and twin-row soybean production in the Mid South

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A Maturity Group (MG) IV and MG V soybean [Glycine max (L.) Merr] cultivar were planted in single-rows and twin-rows on 102 cm beds at 20, 30, 40, and 50 seeds m-2 in a Beulah fine sandy loam (coarse-loamy, mixed thermic Typic Dystrochrepts) in 2008, 2009, 2010 and Sharkey clay (Vertic Haplaquept) i...

  9. Optical RAM row access using WDM-enabled all-passive row/column decoders

    NASA Astrophysics Data System (ADS)

    Papaioannou, Sotirios; Alexoudi, Theoni; Kanellos, George T.; Miliou, Amalia; Pleros, Nikos

    2014-03-01

    Towards achieving a functional RAM organization that reaps the advantages offered by optical technology, a complete set of optical peripheral modules, namely the Row (RD) and Column Decoder (CD) units, is required. In this perspective, we demonstrate an all-passive 2×4 optical RAM RD with row access operation and subsequent all-passive column decoding to control the access of WDM-formatted words in optical RAM rows. The 2×4 RD exploits a WDM-formatted 2-bit-long memory WordLine address along with its complementary value, all of them encoded on four different wavelengths and broadcasted to all RAM rows. The RD relies on an all-passive wavelength-selective filtering matrix (λ-matrix) that ensures a logical `0' output only at the selected RAM row. Subsequently, the RD output of each row drives the respective SOA-MZI-based Row Access Gate (AG) to grant/block the entry of the incoming data words to the whole memory row. In case of a selected row, the data word exits the row AG and enters the respective CD that relies on an allpassive wavelength-selective Arrayed Waveguide Grating (AWG) for decoding the word bits into their individual columns. Both RD and CD procedures are carried out without requiring any active devices, assuming that the memory address and data word bits as well as their inverted values will be available in their optical form by the CPU interface. Proof-of-concept experimental verification exploiting cascaded pairs of AWGs as the λ-matrix is demonstrated at 10Gb/s, providing error-free operation with a peak power penalty lower than 0.2dB for all optical word channels.

  10. Neutron camera employing row and column summations

    DOEpatents

    Clonts, Lloyd G.; Diawara, Yacouba; Donahue, Jr, Cornelius; Montcalm, Christopher A.; Riedel, Richard A.; Visscher, Theodore

    2016-06-14

    For each photomultiplier tube in an Anger camera, an R.times.S array of preamplifiers is provided to detect electrons generated within the photomultiplier tube. The outputs of the preamplifiers are digitized to measure the magnitude of the signals from each preamplifier. For each photomultiplier tube, a corresponding summation circuitry including R row summation circuits and S column summation circuits numerically add the magnitudes of the signals from preamplifiers for each row and for each column to generate histograms. For a P.times.Q array of photomultiplier tubes, P.times.Q summation circuitries generate P.times.Q row histograms including R entries and P.times.Q column histograms including S entries. The total set of histograms include P.times.Q.times.(R+S) entries, which can be analyzed by a position calculation circuit to determine the locations of events (detection of a neutron).

  11. Trauma therapy for death row families.

    PubMed

    Long, Walter C

    2011-01-01

    The family members of death row inmates undergo unique suffering that includes disenfranchised grief and intense psychological trauma. In Texas, where executions occur at a rate of 1 every 2 weeks, this class of trauma victims presumably is large, a fact that should generate public mental health concern. Yet the class remains virtually unknown to the therapeutic community. Very little has been done to address the trauma healing needs of death row families. This theoretical paper proposes that structural therapy designed to reengage attachment relationships and reempower family members' innate resources to emotionally regulate one another may provide one of the most effective means of helping this population survive trauma.

  12. Preoperative staging of colorectal cancer: CT vs. integrated FDG PET/CT.

    PubMed

    Shin, Sang Soo; Jeong, Yong Yeon; Min, Jung Jun; Kim, Hyeong Rok; Chung, Tae Woong; Kang, Heoung Keun

    2008-01-01

    Accurate preoperative staging is essential in determining the optimal therapeutic planning for individual patients. The computed tomography (CT) in the preoperative staging of colorectal cancer, even if controversial, may be useful for planning surgery and/or neoadjuvant therapy, particularly when local tumor extension into adjacent organs or distant metastases are detected. There have been significant changes in the CT technology with the advent of multi-detector row CT (MDCT) scanner. Advances in CT technology have raised interest in the potential role of CT for detection and staging of colorectal cancer. In recent studies, MDCT with MPR images has shown promising accuracy in the evaluation of local extent and nodal involvement of colorectal cancer. Combined PET/CT images have significant advantages over either alone because it provides both functional and anatomical data. Therefore, it is natural to expect that PET/CT would improve the accuracy of preoperative staging of colorectal cancer. The most significant additional information provided by PET/CT relates to the accurate detection of distant metastases. For the evaluation of patients with colorectal cancer, CT has relative advantages over PET/CT in regard to the depth of tumor invasion through the wall, extramural extension, and regional lymph node metastases. PET/CT should be performed on selected patients with suggestive but inconclusive metastatic lesions with CT. In addition, PET/CT with dedicated CT protocols, such as contrast-enhanced PET/CT and PET/CT colonography, may replace the diagnostic CT for the preoperative staging of colorectal cancer.

  13. Radiometric surface temperature components for row crops

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Land surface temperature is a boundary condition often used in assessing soil moisture status and energy exchange from the soil-vegetation-atmosphere interface. For row crops having incomplete canopy cover, the radiometric surface temperature is a composite of sunlit and shaded vegetation and substr...

  14. Head CT scan

    MedlinePlus

    Brain CT; Cranial CT; CT scan - skull; CT scan - head; CT scan - orbits; CT scan - sinuses; Computed tomography - cranial; CAT scan - brain ... conditions: Birth (congenital) defect of the head or brain Brain infection Brain tumor Buildup of fluid inside ...

  15. Friendship and Disaffiliation Among the Skid Row Population

    ERIC Educational Resources Information Center

    Rooney, James F.

    1976-01-01

    Personal relationships of skid row men have been described in terms of disaffiliation and replacement of friends. Analysis of social relationships of Philadelphia skid row residents upheld the theory of replacement. The loss of relationships, however, was more closely associated with length of residence in skid row than with age. (Author)

  16. Biomass production of sugarcane on narrow-rows in Florida

    SciTech Connect

    Cayton, J.E.; Eiland, B.R.

    1981-01-01

    Sugarcane production for biomass was examined on three narrow-row patterns in Florida. Equipment and production methods were modified for planting, spraying and harvesting the narrow-row patterns. No large increases in yields of vigorous varieties were found when compared to those from conventional rows. Some increases were observed in varieties which have low stalk populations. 4 refs.

  17. Extended abstract: Partial row projection methods

    SciTech Connect

    Bramley, R.; Lee, Y.

    1996-12-31

    Accelerated row projection (RP) algorithms for solving linear systems Ax = b are a class of iterative methods which in theory converge for any nonsingular matrix. RP methods are by definition ones that require finding the orthogonal projection of vectors onto the null space of block rows of the matrix. The Kaczmarz form, considered here because it has a better spectrum for iterative methods, has an iteration matrix that is the product of such projectors. Because straightforward Kaczmarz method converges slowly for practical problems, typically an outer CG acceleration is applied. Definiteness, symmetry, or localization of the eigenvalues, of the coefficient matrix is not required. In spite of this robustness, work has generally been limited to structured systems such as block tridiagonal matrices because unlike many iterative solvers, RP methods cannot be implemented by simply supplying a matrix-vector multiplication routine. Finding the orthogonal projection of vectors onto the null space of block rows of the matrix in practice requires accessing the actual entries in the matrix. This report introduces a new partial RP algorithm which retains advantages of the RP methods.

  18. A row-by-row off-design performance calculation method for turbines

    NASA Technical Reports Server (NTRS)

    Schobeiri, T.; Abouelkheir, M.

    1991-01-01

    The turbine component of a gas turbine engine is frequently subjected to extreme operation conditions associated with significant changes in mass flow, turbine inlet temperature, pressure and rotational speed. These off-design operation conditions significantly affect the flow deflection within the turbine stage, which consists of individual stator and rotor rows. As a result, the stage parameters representing the velocity diagram will change and affect the efficiency and performance of the stage and, thus, the turbine. A row-by-row calculation method is presented for predicting the performance behavior of turbines under extreme off-design conditions. The method is applied to a multistage turbine for which the off-design performance is calculated and compared with the measurement.

  19. Standardized CT protocols and nomenclature: better, but not yet there.

    PubMed

    Singh, Sarabjeet; Kalra, Mannudeep K

    2014-10-01

    Radiation dose associated with CT is an important safety concern in patient care, especially in children. Technical advancements in multidetector-row CT scanner technology offer several advantages for clinical applications; these advancements have considerably increased CT utilization and enhanced the complexity of CT scanning protocols. Furthermore there are several scan manufacturers spearheading these technical advancements, leading to different commercial names causing confusion among the users, especially at imaging sites with scanners from different vendors. Several scientific studies and the National Council on Radiation Protection and Measurements (NCRP) have shown variation in CT radiation doses for same body region and similar scanning protocols. Therefore there is a need for standardization of scanning protocols and nomenclature of scan parameters. The following material reviews the status and challenges in standardization of CT scanning and nomenclature. PMID:25304702

  20. Hand Replantation with Proximal Row Carpectomy

    PubMed Central

    Lee, Young-Keun; Lee, Hang-Ho; Park, Ji-Kang; Kim, Joo-Yong; Dhawan, Vikas

    2008-01-01

    The purpose of this study is to present our operative technique and postoperative results of the hand replantation with proximal row carpectomy in cases of complete amputation at the level of wrist joint. From May 2003 to April 2005, five patients suffered from complete amputation of the hand due to industrial trauma. Amputation level was radiocarpal joint in three cases and midcarpal joint in two cases. Three cases represented guillotine type and two cases with local crush type injuries. All were men and the mean age was 26.6 years. The mean follow-up period was 26.8 months. At the time of replantation, the wrist joint was stabilized with transarticular fixation using three to four Kirschner’s wires after performing proximal row carpectomy. Postoperatively, functional results such as muscle strength, range of motion of the wrist and fingers, and sensory recovery were assessed according to Chen’s criteria. Joint width and arthritic changes of the radio-capitate joint were evaluated with radiologic tools. According to Chen’s criteria, the overall results in five cases were classified as grade II. Intrinsic muscle power of hands was found to be grade 4. The mean grip and pinch powers were 41% and 45%, respectively, compared to contralateral hand. The mean arc of flexion–extension of wrist was 53°. Total mean active motion of fingers was 215 degrees. Static two-point discrimination of fingertip ranged from 8 to 13 mm. On the follow-up, computerized tomography showed well-preserved radio-capitate joint space without any arthritic changes. While performing hand replantation after amputation at the radiocarpal or midcarpal level, proximal row carpectomy is a useful procedure to preserve joint motion of the wrist in selected cases. PMID:18855073

  1. Quantification and elimination of windmill artifacts in multi slice CT

    NASA Astrophysics Data System (ADS)

    Utrup, Steven J.; Brown, Kevin M.

    2008-03-01

    In multi-slice cone beam CT imaging, there are artifacts known as windmill artifacts. These artifacts are due to not satisfying the Nyquist criteria in the patient longitudinal direction. This paper quantifies and compares these artifacts as a function of the number of rows, pitch, collimation, and image thickness of the CT scanner. Scanners with rows of 16, 64 and 128 are measured and compared with simulated data, using both Helical and Axial scanning modes. In addition three focal spot switching modes are compared: the traditional within image plane mode; diagonal mode; and quad mode. All images are compared via four criteria: artifacts, MTF, SSP and noise. Results show that the frequency of the artifact, or number of blades on the windmill and magnitude of each blade, is dependent on the rate at which the rows are crossed for an image. For example, for a given pitch, doubling the rows doubles the frequency of the artifact, with each artifact approximately the magnitude. A similar result can be obtained by keeping the number of rows constant and varying the pitch. The artifact disappears as the Nyquist criteria is satisfied by either increasing the slice thickness or incorporating one of the focal spot switching modes that switch in the patient longitudinal direction. For a given MTF and SSP, the diagonal focal spot switching mode has slightly more noise while the other two are approximately equal. The artifact varies with the quad mode being the best and traditional mode being the worse.

  2. 97. VIEW OF CENTER OF INTERIOR ROW OF EQUIPMENT CABINETS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    97. VIEW OF CENTER OF INTERIOR ROW OF EQUIPMENT CABINETS ON SOUTH SIDE OF LANDLINE INSTRUMENTATION ROOM. THREE ADDITIONAL GOULD BRUSH CHART RECORDERS ARE IN THIS ROW (NOT VISIBLE IN PHOTOGRAPH) LOCATED IMMEDIATELY EAST (LEFT) OF THESE CABINETS. Another row of cabinets south of (behind) this one is not accessible for photography. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Operations Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  3. A New Submaximal Rowing Test to Predict 2,000-m Rowing Ergometer Performance.

    PubMed

    Otter, Ruby T A; Brink, Michel S; Lamberts, Robert P; Lemmink, Koen A P M

    2015-09-01

    The purpose of this study was to assess predictive value of a new submaximal rowing test (SmRT) on 2,000-m ergometer rowing time-trial performance in competitive rowers. In addition, the reliability of the SmRT was investigated. Twenty-four competitive male rowers participated in this study. After determining individual HRmax, all rowers performed an SmRT followed by a 2,000-m rowing ergometer time trial. In addition, the SmRT was performed 4 times (2 days in between) to determine the reliability. The SmRT consists of two 6-minute stages of rowing at 70 and 80% HRmax, followed by a 3-minute stage at 90% HRmax. Power was captured during the 3 stages, and 60 seconds of heart rate recovery (HRR60s) was measured directly after the third stage. Results showed that predictive value of power during the SmRT on 2,000-m rowing time also increased with stages. CVTEE% is 2.4, 1.9, and 1.3%. Pearson correlations (95% confidence interval [95% CI]) were -0.73 (-0.88 to -0.45), -0.80 (-0.94 to -0.67), and -0.93 (-0.97 to -0.84). 2,000-m rowing time and HRR60s showed no relationship. Reliability of power during the SmRT improved with the increasing intensity of the stages. The coefficient of variation (CVTEM%) was 9.2, 5.6, and 0.4%. Intraclass correlation coefficients (ICC) and 95% CI were 0.91 (0.78-0.97), 0.92 (0.81-0.97), and 0.99 (0.97-1.00). The CVTEM% and ICC of HRR60s were 8.1% and 0.93 (0.82-0.98). In conclusion, the data of this study shows that the SmRT is a reliable test that it is able to accurately predict 2,000-m rowing time on an ergometer. The SmRT is a practical and valuable submaximal test for rowers, which can potentially assist with monitoring, fine-tuning and optimizing training prescription in rowers. PMID:25774627

  4. 19. VIEW OF THE TWO ROWS OF COKE OVENS, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. VIEW OF THE TWO ROWS OF COKE OVENS, LOOKING EAST. THE OVENS LIE TO THE EAST OF THE MINE BUILDINGS. BEEHIVE OVENS FORM THE ROW ON THE LEFT OF THE PHOTOGRAPH. THE RECTANGULAR OVENS ARE ON THE RIGHT. - Tower Hill No. 2 Mine, Approximately 0.47 mile Southwest of intersection of Stone Church Road & Township Route 561, Hibbs, Fayette County, PA

  5. System manual for the University of Pennsylvania retrofitted solar heated Philadelphia row home (SolaRow)

    SciTech Connect

    Zinnes, I.; Lior, N.

    1980-05-01

    The University of Pennsylvania SolaRow house, an urban row home retrofitted for comfort and domestic hot water heating, was extensively instrumented for performance monitoring and acquisition of weather and solar radiation data. This report describes the heating and instrumentation systems, provides the details for instrumentation, piping and valve identification, and specifies the operation and maintenance of the heating and data acquisition systems. The following are included: (1) system flow diagrams; (2) valve and cable identification tables; (3) wiring diagrams; and (4) start-up, normal operation, shut-down, maintenance and trouble-shooting procedures. It thus provides the necessary technical information to permit system operation and monitoring, overall system performance analysis and optimization, and acquisition of climatological data.

  6. Soft tissue imaging with photon counting spectroscopic CT

    NASA Astrophysics Data System (ADS)

    Shikhaliev, Polad M.

    2015-03-01

    The purpose of this work was experimental investigation of photon counting spectroscopic CT (PCS-CT) imaging of anatomical soft tissue with clinically relevant size. The imaging experiments were performed using a spectroscopic CT system based on CdZnTe photon counting detector with two rows of pixels, 256 pixels in each row, 1  ×  1 mm2 pixel size, and 25.6 cm detector length. The detector could split the x-ray energy spectrum to 5 regions (energy bins), and acquire 5 multi-energy (spectroscopic) CT images in a single CT scan. A sample of round shaped anatomical soft tissue of 14 cm diameter including lean and fat was used for imaging. To avoid the negative effect of anatomical noise on quantitative analysis, a spectroscopic CT phantom with tissue equivalent solid materials was used. The images were acquired at 60, 90, and 120 kVp tube voltages, and spectroscopic image series were acquired with 3 and 5 energy bins. Spectroscopic CT numbers were introduced and used to evaluate an energy selective image series. The anatomical soft tissue with 14 cm diameter was visualized with good quality and without substantial artifacts by the photon counting spectroscopic CT system. The effects of the energy bin crosstalk on spectroscopic CT numbers were quantified and analyzed. The single and double slice PCS-CT images were acquired and compared. Several new findings were observed, including the effect of soft tissue non-uniformity on image artifacts, unique status of highest energy bin, and material dependent visualization in spectroscopic image series. Fat-lean decomposition was performed using dual energy subtraction and threshold segmentation methods, and compared. Using K-edge filtered x-rays improved fat-lean decomposition as compared to conventional x-rays. Several new and important aspects of the PCS-CT were investigated. These include imaging soft tissue with clinically relevant size, single- and double-slice PCS-CT imaging, using spectroscopic CT

  7. Biomechanical determinants of elite rowing technique and performance.

    PubMed

    Buckeridge, E M; Bull, A M J; McGregor, A H

    2015-04-01

    In rowing, the parameters of injury, performance, and technique are all interrelated and in dynamic equilibrium. Whilst rowing requires extreme physical strength and endurance, a high level of skill and technique is essential to enable an effective transfer of power through the rowing sequence. This study aimed to determine discrete aspects of rowing technique, which strongly influence foot force production and asymmetries at the foot-stretchers, as these are biomechanical parameters often associated with performance and injury risk. Twenty elite female rowers performed an incremental rowing test on an instrumented rowing ergometer, which measured force at the handle and foot-stretchers, while three-dimensional kinematic recordings of the ankle, knee, hip, and lumbar-pelvic joints were made. Multiple regression analyses identified hip kinematics as a key predictor of foot force output (R(2)  = 0.48), whereas knee and lumbar-pelvic kinematics were the main determinants in optimizing the horizontal foot force component (R(2)  = .41). Bilateral asymmetries of the foot-stretchers were also seen to significantly influence lumbar-pelvic kinematics (R(2)  = 0.43) and pelvic twisting (R(2)  = 0.32) during the rowing stroke. These results provide biomechanical evidence toward aspects of technique that can be modified to optimize force output and performance, which can be of direct benefit to coaches and athletes.

  8. Rectal cancer staging: Multidetector-row computed tomography diagnostic accuracy in assessment of mesorectal fascia invasion

    PubMed Central

    Ippolito, Davide; Drago, Silvia Girolama; Franzesi, Cammillo Talei; Fior, Davide; Sironi, Sandro

    2016-01-01

    AIM: To assess the diagnostic accuracy of multidetector-row computed tomography (MDCT) as compared with conventional magnetic resonance imaging (MRI), in identifying mesorectal fascia (MRF) invasion in rectal cancer patients. METHODS: Ninety-one patients with biopsy proven rectal adenocarcinoma referred for thoracic and abdominal CT staging were enrolled in this study. The contrast-enhanced MDCT scans were performed on a 256 row scanner (ICT, Philips) with the following acquisition parameters: tube voltage 120 KV, tube current 150-300 mAs. Imaging data were reviewed as axial and as multiplanar reconstructions (MPRs) images along the rectal tumor axis. MRI study, performed on 1.5 T with dedicated phased array multicoil, included multiplanar T2 and axial T1 sequences and diffusion weighted images (DWI). Axial and MPR CT images independently were compared to MRI and MRF involvement was determined. Diagnostic accuracy of both modalities was compared and statistically analyzed. RESULTS: According to MRI, the MRF was involved in 51 patients and not involved in 40 patients. DWI allowed to recognize the tumor as a focal mass with high signal intensity on high b-value images, compared with the signal of the normal adjacent rectal wall or with the lower tissue signal intensity background. The number of patients correctly staged by the native axial CT images was 71 out of 91 (41 with involved MRF; 30 with not involved MRF), while by using the MPR 80 patients were correctly staged (45 with involved MRF; 35 with not involved MRF). Local tumor staging suggested by MDCT agreed with those of MRI, obtaining for CT axial images sensitivity and specificity of 80.4% and 75%, positive predictive value (PPV) 80.4%, negative predictive value (NPV) 75% and accuracy 78%; while performing MPR the sensitivity and specificity increased to 88% and 87.5%, PPV was 90%, NPV 85.36% and accuracy 88%. MPR images showed higher diagnostic accuracy, in terms of MRF involvement, than native axial images

  9. Fuel metabolism during severe rowing exercise

    SciTech Connect

    Hoyt, R.W.; Lubowitz, J.; Asakura, T.; Stein, T.P.

    1986-03-01

    Eight elite oarsmen were studied during and after six min of severe ergometer exercise. Power output averaged 380 +/- 28 watts. Serial venous blood samples and gas exchange measurements were obtained during exercise. In 4 of the 8 subjects, a primed periodic oral dose of the tracer (6,6-/sup 2/H/sub 2/)glucose was used to determine the effects of severe exercise on glucose metabolism. During exercise, the levels of lactate progressively increased to 12.2 +/- 1.3 mM (SE). There was little change in isotopic glucose enrichment during exercise (from 2.95 +/- 0.30 to 2.55 +/- 0.23 atom percent excess, APE). During recovery, isotopic glucose enrichment decreased significantly to 1.40 +/- 0.14 APE, indicating a substantial post-exercise plasma glucose flux. There were significant post-exercise increases in plasma glucose accumulation (from 84 +/- 5 to 131 +/- 3 mg/dl) and insulin concentration (0.57 +/- 0.08 to 1.34 +/- 0.15 ng/ml). These results suggest that muscle glycogen is the primary source of fuel during six minutes of maximal rowing exercise.

  10. 1. View looking southeast down senior officer row. Building 6 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. View looking southeast down senior officer row. Building 6 on left and senior officer housing on right. Galaxy Street in foreground. - Chanute Air Force Base, East of Route 45 & south of Rantoul, Rantoul, Champaign County, IL

  11. Cell block eleven, looking from the "Death Row" exercise yard, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Cell block eleven, looking from the "Death Row" exercise yard, facing north (note cell block fifteen to the right and cell block fourteen in the distance_ - Eastern State Penitentiary, 2125 Fairmount Avenue, Philadelphia, Philadelphia County, PA

  12. 26. INTERIOR VIEW SHOWING ROW OF TIMBER SUPPORT TOWERS BUILT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. INTERIOR VIEW SHOWING ROW OF TIMBER SUPPORT TOWERS BUILT AS TEMPORARY TRUSS REINFORCEMENT (NOTE STEEL STRUCTURES ATOP TIMBER BRACING) - Oakland Army Base, Transit Shed, East of Dunkirk Street & South of Burma Road, Oakland, Alameda County, CA

  13. General view of building in context showing row of residences ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    General view of building in context showing row of residences adjacent to golf course, facing northeast. - Marine Barracks, Panama Canal, Officers' Quarters, 800' West of Bruja Road, Balboa, Former Panama Canal Zone, CZ

  14. Effect of BMI on knee joint torques in ergometer rowing.

    PubMed

    Roemer, Karen; Hortobagyi, Tibor; Richter, Chris; Munoz-Maldonado, Yolanda; Hamilton, Stephanie

    2013-12-01

    Although an authoritative panel recommended the use of ergometer rowing as a non-weight-bearing form of exercise for obese adults, the biomechanical characterization of ergometer rowing is strikingly absent. We examined the interaction between body mass index (BMI) relative to the lower extremity biomechanics during rowing in 10 normal weight (BMI 18-25), 10 overweight (BMI 25-30 kg·m⁻²), and 10 obese (BMI > 30 kg·m⁻²) participants. The results showed that BMI affects joint kinematics and primarily knee joint kinetics. The data revealed that high BMI leads to unfavorable knee joint torques, implying increased loads of the medial compartment in the knee joint that could be avoided by allowing more variable foot positioning on future designs of rowing ergometers.

  15. Detail, starpattern balustrade of north span, from northwest, showing row ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail, star-pattern balustrade of north span, from northwest, showing row of four star-pattern railing slabs bracketed by simple molded concrete balusters - Horner Street Bridge, Horner Street over Stonycreek River, Johnstown, Cambria County, PA

  16. Detail view of stylized panel on end of seating row ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail view of stylized panel on end of seating row - National Home for Disabled Volunteer Soldiers, Pacific Branch, Wadsworth Theater, 11301 Wilshire Boulevard, West Los Angeles, Los Angeles County, CA

  17. Comparison of Exercise Performance on Rowing and Cycle Ergometers.

    ERIC Educational Resources Information Center

    Mahler, Donald A.; And Others

    1987-01-01

    The purpose of this study was to compare exercise performance and cardiorespiratory responses on the rowing ergometer with those on the cycle ergometer. Findings are presented and explained. (Author/MT)

  18. THERMALWATER FLOW METER. Hot Springs National Park, Bathhouse Row, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    THERMAL-WATER FLOW METER. - Hot Springs National Park, Bathhouse Row, Superior Bathhouse: Mechanical & Piping Systems, State Highway 7, 1 mile north of U.S. Highway 70, Hot Springs, Garland County, AR

  19. Row effect for R-11 condensation on enhanced tubes

    SciTech Connect

    Webb, R.L.; Murawski, C.G. )

    1990-08-01

    Experimental results of a condensation row effect study on enhanced tubes are presented. A test cell was constructed to condense Refrigerant-11 on the shell side of a vertical bank of five horizontal tubes. Four distinctly different commercially available tubes were tested. The tubes are a 1024-fpm integral fin, the Wolverine Tube-C, Wieland GEWA-SC, and the Tred-D. A modified Turbo-C tube was also tested. Experimental and visual observations are used to understand the row effect due to condensate loading. By plotting the data in the form of the local condensation coefficient versus condensate Reynolds number, the results may be interpreted for any number of tube rows, up to the maximum Reynolds numbers tested. Bundle average condensation coefficients may be established by integrating the h versus Re values over the number of tube rows.

  20. Proximal row carpectomy with or without postoperative immobilisation.

    PubMed

    Jacobs, R; Degreef, I; De Smet, L

    2008-12-01

    Previously published reports have shown good results after proximal row carpectomy in all cases that had a postoperative immobilisation period from 1 to 4 weeks. Immobilisation is thought to be necessary because of the risk of postoperative subluxation of the carpus and for pain relief. There is, however, no evidence of its value. The results in 13 patients who underwent proximal row carpectomy without postoperative immobilisation were compared with those in 25 patients who underwent proximal row carpectomy with postoperative immobilisation for 4 weeks. After a mean follow-up period of 27 months, no significant differences were found for pain, range of motion or return to work between the two groups. We conclude that postoperative immobilisation is not necessary after proximal row carpectomy.

  1. 77 FR 74237 - T. Rowe Price Associates, Inc., et al.; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-13

    ... COMMISSION T. Rowe Price Associates, Inc., et al.; Notice of Application December 7, 2012. AGENCY: Securities... for an exemption from sections 12(d)(1)(A) and (B) of the Act. Applicants: T. Rowe Price Associates, Inc. (``TRP''), T. Rowe Price Institutional Income Funds, Inc. (the ``Corporation'') and T. Rowe...

  2. 30 CFR 285.301 - What do ROW grants and RUE grants include?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What do ROW grants and RUE grants include? 285... Row Grants and Rue Grants § 285.301 What do ROW grants and RUE grants include? (a) An ROW grant: (1... pumping station or other accessory facility. (b) An RUE grant includes the site on which a facility...

  3. 30 CFR 285.301 - What do ROW grants and RUE grants include?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What do ROW grants and RUE grants include? 285... and Rights-of-Use and Easement Grants for Renewable Energy Activities Row Grants and Rue Grants § 285.301 What do ROW grants and RUE grants include? (a) An ROW grant: (1) Includes the full length of...

  4. Summary of Meta-Analyses Dealing with Single-Row versus Double-Row Repair Techniques for Rotator Cuff Tears

    PubMed Central

    Spiegl, U.J.; Euler, S.A.; Millett, P.J.; Hepp, P.

    2016-01-01

    Background: Several meta-analyses of randomized clinical trials have been performed to analyze whether double-row (DR) rotator cuff repair (RCR) provides superior clinical outcomes and structural healing compared to single-row (SR) repair. The purpose of this study was to sum up the results of meta-analysis comparing SR and DR repair with respect on clinical outcomes and re-tear rates. Methods: A literature search was undertaken to identify all meta-analyses dealing with randomized controlled trials comparing clinical und structural outcomes after SR versus DR RCR. Results: Eight meta-analyses met the eligibility criteria: two including Level I studies only, five including both Level I and Level II studies, and one including additional Level III studies. Four meta-analyses found no differences between SR and DR RCR for patient outcomes, whereas four favored DR RCR for tears greater than 3 cm. Two meta-analyses found no structural healing differences between SR and DR RCR, whereas six found DR repair to be superior for tears greater than 3 cm tears. Conclusion: No clinical differences are seen between single-row and double-row repair for small and medium rotator cuff tears after a short-term follow-up period with a higher re-tear rate following single-row repairs. There seems to be a trend to superior results with double-row repair in large to massive tear sizes. PMID:27708735

  5. Abdominal and Pelvic CT

    MedlinePlus

    ... Professions Site Index A-Z Computed Tomography (CT) - Abdomen and Pelvis Computed tomography (CT) of the abdomen ... and Pelvis? What is CT Scanning of the Abdomen/Pelvis? Computed tomography, more commonly known as a ...

  6. Abdominal CT scan

    MedlinePlus

    Computed tomography scan - abdomen; CT scan - abdomen; CT abdomen and pelvis ... 2016:chap 133. Radiologyinfo.org. Computed tomography (CT) - abdomen and pelvis. Updated June 16, 2016. www.radiologyinfo. ...

  7. Correlative Imaging in a Patient with Cystic Thymoma: CT, MR and PET/CT Comparison

    PubMed Central

    Romeo, Valeria; Esposito, Alfredo; Maurea, Simone; Camera, Luigi; Mainenti, Pier Paolo; Palmieri, Giovannella; Buonerba, Carlo; Salvatore, Marco

    2015-01-01

    Summary Background Cystic thymoma is a rare variant of thymic neoplasm characterized by almost complete cystic degeneration with mixed internal structure. We describe a case of a 60 year-old woman with a cystic thymoma studied with advanced tomographic imaging stydies. CT, MRI and PET/CT with 18F-FDG were performed; volumetric CT and MRI images provided better anatomic evaluation for pre-operative assessment, while PET/CT was helpful for lesion characterization based on 18F-FDG uptake. Although imaging studies are mandatory for pre-operative evaluation of cystic thymoma, final diagnosis still remains surgical. Case Report A 60-year-old woman with recent chest pain and no history of previous disease was admitted to our departement to investigate the result of a previous chest X-ray that showed bilateral mediastinal enlargement; for this purpose, enhanced chest CT scan was performed using a 64-rows scanner (Toshiba, Aquilion 64, Japan) before and after intravenous bolus administration of iodinated non ionic contrast agent; CT images demonstrated the presence of a large mediastinal mass (11×8 cm) located in the anterior mediastinum who extended from the anonymous vein to the cardio-phrenic space, compressing the left atrium and causing medium lobe atelectasis; bilateral pleural effusion was also present. Conclusions In conclusion, correlative imaging plays a foundamental role for the diagnostic evaluation of patient with cystic thymoma. In particular, volumetric CT and MRI studies can provide better anatomic informations regarding internal structure and local tumor spread for pre-operative assessment. Conversely, metabolic imaging using 18F-FDG PET/CT is helpful for lesion characterization differentiating benign from malignant lesion on the basis of intense tracer uptake. The role of PET/MRI is still under investigation. However, final diagnosis still remains surgical even though imaging studies are mandatory for pre-operative patient management. PMID:25593635

  8. Multislice helical CT: image temporal resolution.

    PubMed

    Hui, H; Pan, T; Shen, Y

    2000-05-01

    A multislice helical computed tomography (CT) halfscan (HS) reconstruction algorithm is proposed for cardiac applications. The imaging performances (in terms of the temporal resolution, z-axis resolution, image noise, and image artifacts) of the HS algorithm are compared to the existing algorithms using theoretical models and clinical data. A theoretical model of the temporal resolution performance (in terms of the temporal sensitivity profile) is established for helical CT, in general, i.e., for any number of detector rows and any reconstruction algorithm used. It is concluded that the HS reconstruction results in improved image temporal resolution than the corresponding 180 degrees LI (linear interpolation) reconstruction and is more immune to the inconsistent data problem induced by cardiac motions. The temporal resolution of multislice helical CT with the HS algorithm is comparable to that of single-slice helical CT with the HS algorithm. In practice, the 180 degrees LI and HS-LI algorithms can be used in parallel to generate two image sets from the same scan acquisition, one (180 degrees LI) for improved z-resolution and noises, and the other (HS-LI) for improved image temporal resolution.

  9. Validated biomechanical model for efficiency and speed of rowing.

    PubMed

    Pelz, Peter F; Vergé, Angela

    2014-10-17

    The speed of a competitive rowing crew depends on the number of crew members, their body mass, sex and the type of rowing-sweep rowing or sculling. The time-averaged speed is proportional to the rower's body mass to the 1/36th power, to the number of crew members to the 1/9th power and to the physiological efficiency (accounted for by the rower's sex) to the 1/3rd power. The quality of the rowing shell and propulsion system is captured by one dimensionless parameter that takes the mechanical efficiency, the shape and drag coefficient of the shell and the Froude propulsion efficiency into account. We derive the biomechanical equation for the speed of rowing by two independent methods and further validate it by successfully predicting race times. We derive the theoretical upper limit of the Froude propulsion efficiency for low viscous flows. This upper limit is shown to be a function solely of the velocity ratio of blade to boat speed (i.e., it is completely independent of the blade shape), a result that may also be of interest for other repetitive propulsion systems.

  10. Influence of Ergometer Design on Physiological Responses during Rowing.

    PubMed

    Rossi, J; Piponnier, E; Vincent, L; Samozino, P; Messonnier, L

    2015-11-01

    The aim of this study was to compare the physiological responses and rowing efficiency on 2 different rowing ergometers: stationary vs. dynamic ergometers manufactured by Concept2. 11 oarswomen and oarsmen rowed 4 min at 60% and 70% of peak power output on both ergometers (randomized order). Power output, stroke rate, heart rate, oxygen uptake, carbon dioxide production, lactate accumulation and rating of perceived exertion were recorded at each stage on the 2 ergometers. Gross and net efficiencies were computed. Exercise intensity was associated with increases in all parameters. Rowing on dynamic ergometer was associated with higher heart rate, oxygen uptake, carbon dioxide production and stroke rate, concomitantly to lower blood lactate accumulation but also to lower gross and net efficiencies. The present study showed that rowing efficiency and blood lactate accumulation were lower on the Concept2 dynamic ergometer than on its stationary counterpart. If the use of the Concept2 dynamic ergometer may provide some advantages (reduced risk of injuries), its utilization requires a specific evaluation of physiological responses during an incremental exercise for an adapted management of training. PMID:26212249

  11. A parallelization of the row-searching algorithm

    NASA Astrophysics Data System (ADS)

    Yaici, Malika; Khaled, Hayet; Khaled, Zakia; Bentahar, Athmane

    2012-11-01

    The problem dealt in this paper concerns the parallelization of the row-searching algorithm which allows the search for linearly dependant rows on a given matrix and its implementation on MPI (Message Passing Interface) environment. This algorithm is largely used in control theory and more specifically in solving the famous diophantine equation. An introduction to the diophantine equation is presented, then two parallelization approaches of the algorithm are detailed. The first distributes a set of rows on processes (processors) and the second makes a distribution per blocks. The sequential algorithm and its two parallel forms are implemented using MPI routines, then modelled using UML (Unified Modelling Language) and finally evaluated using algorithmic complexity.

  12. Nutrition and Supplements for Elite Open-Weight Rowing.

    PubMed

    Boegman, Susan; Dziedzic, Christine E

    2016-01-01

    Competitive rowing events are raced over 2,000 m requiring athletes to have highly developed aerobic and anaerobic systems. Elite rowers therefore undertake training sessions focused on lactate tolerance, strength and power as well as aerobic and anaerobic capacity development, that can amount to a 24-h training week. The training stimuli and consequent metabolic demands of each session in a rowing training program differ depending on type, length, and intensity. Nutrition guidelines for endurance- and power-based sports should be drawn upon; however, individualized and flexible nutrition plans are critical to successfully meet the daily, weekly, and cyclic nutrient requirements of a rower. This review will provide an overview of key nutritional strategies to optimize training and enhance adaptation, and briefly discuss supplement strategies that may support health and enhance performance in elite rowing. PMID:27399822

  13. Computed Tomography (CT) - Spine

    MedlinePlus

    ... News Physician Resources Professions Site Index A-Z Computed Tomography (CT) - Spine Computed tomography (CT) of the spine is a diagnostic imaging ... Spine? What is CT Scanning of the Spine? Computed tomography, more commonly known as a CT or CAT ...

  14. Reeling in the textiles at Row Clothing Enterprises

    SciTech Connect

    Ridgley, H.

    1997-12-01

    While a handful of textile processing centers in operation today can date their roots back to the turn of this century or before, Row Clothing Enterprises (Baltimore) first opened its doors in 1985. Soon after, it climbed its way to becoming one of the premier textile processing businesses in the country. And what they want most of all is usable clothing--the discards of American secondhand clothing stores. The company exports 100% of the usable clothing it recovers paying institutions as much as $150 a ton for the material. Graders also sort the material into piles headed for the mutilating, or fiber-shredding, machine. While not all the material is shredded, it does provide more opportunities for resale. Whatever Row cannot resell as clothing--because it is soiled or torn--gets processed into industrial wiping cloths, if it is cotton. Clothing made from wool and polyester is sent to woolen and polyester fiber mills to be made into new clothing. While 80% of Row`s wiper market is domestic, 80% of its fiber market is overseas.

  15. Relation of baseflow to row crop intensity in Iowa

    USGS Publications Warehouse

    Schilling, K.E.

    2005-01-01

    Increasing baseflow and baseflow percentage over the second half of the 20th century in Iowa has contributed to increasing nitrate-nitrogen concentrations measured in Iowa rivers because nitrate is primarily delivered to streams as baseflow and tile drainage. The relation of baseflow and baseflow percentage to row crop land use was evaluated for 11 Iowa rivers and their watersheds for their period of streamflow record (58-73 years period). Results indicated increasing baseflow in Iowa's rivers is significantly related to increasing row crop intensity. A 13-52% increase in row crop percentage in many Iowa watersheds has contributed to an increase of 33-135 mm increase in baseflow and 7-31% increase in baseflow percentage. Limited historical water quality data from two larger Iowa rivers (Cedar and Raccoon rivers) suggest that increasing row crop land use over the 20th century has produced more baseflow and contributed to increasing nitrate concentrations in Iowa's rivers. ?? 2004 Elsevier B.V. All rights reserved.

  16. A mathematical model concerning reflectance from a row crop

    NASA Technical Reports Server (NTRS)

    Jaggi, R. K.

    1972-01-01

    The recent work of Allen, Gayle, and Richardson (1970) and Suits (1972) has been extended to compute directional reflectance from a crop row. A model is constructed which takes into account edge effects and aids in discriminating crops with leaf orientation in preferred directions. This report only contains the development of the mathematical equations. Numerical results will be published in a forthcoming report.

  17. 1. Photocopy of c. 1906 photograph of row Creole T ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photocopy of c. 1906 photograph of row Creole T houses across from mill pond that were available to skilled workers including engineers. - Laurel Valley Sugar Plantation, Engineer's House, 2 Miles South of Thibodaux on State Route 308, Thibodaux, Lafourche Parish, LA

  18. Strip tillage for single and twin-row peanut

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Soil degradation and rising production costs have prompted grower interest in conservation tillage with high residue cover crops for peanut (Arachis hypogaea L.). The objective was to evaluate single and twin-row peanut production across three different strip tillage implements with and without a c...

  19. Interior view to the east, note the row of transmitters ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view to the east, note the row of transmitters and the cables in the foreground - Over-the-Horizon Backscatter Radar Network, Christmas Valley Radar Site Transmit Sector Six Transmitter Building, On unnamed road west of Lost Forest Road, Christmas Valley, Lake County, OR

  20. Poverty and Sex Relationships in a "Skid Row" Slum

    ERIC Educational Resources Information Center

    Kuttner, Robert E.

    1971-01-01

    The article concludes that the difference between skid row and middle class women is not in standards, essentially, but in success in adhering to standards. Though this difference may be due to inherited qualities that make these women more vulnerable, a portion of the blame rests with society. (Author)

  1. Human Service Strategy in an Urban Skid Row.

    ERIC Educational Resources Information Center

    Hobfoll, S.E.; And Others

    1981-01-01

    Studies changes in the physical and social composition of Skid Row. Results indicate multiple agency users were found to have a greater alcohol problem and to be more socially isolated than nonagency users. Multiple agency users were very much in need of subsistence level support and health maintenance. (Author)

  2. Power, Consent and Resistance: An Autoethnography of Competitive Rowing

    ERIC Educational Resources Information Center

    Purdy, Laura; Potrac, Paul; Jones, Robyn

    2008-01-01

    This study builds upon existing socio-cultural work into sports coaching by probing the meanings and varieties of the shared coach-athlete experience. Specifically, the paper utilises an autoethnographic approach in an attempt to chart the complex and dynamic relationship that existed between me, the principal author, as a rowing coxswain and my…

  3. Peavey Duluth Annex, thirty silos. Back three R rows originally ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Peavey Duluth Annex, thirty silos. Back three R rows originally built in 1900, front three built in 1901 - Peavey Duluth Terminal Elevator, 1901 Annex, South side of first slip, north from outer end of Rice's Point, east of Garfield Avenue, Duluth, St. Louis County, MN

  4. 1. Elevator row at Duluth. Rice's Point showing context of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Elevator row at Duluth. Rice's Point showing context of Peavey Duluth Terminal and Occident Terminal. - Peavey Duluth Terminal Elevator, South side of first slip, north from outer end of Rice's Point, east of Garfield Avenue, Duluth, St. Louis County, MN

  5. Rowing Crew Coordination Dynamics at Increasing Stroke Rates

    PubMed Central

    2015-01-01

    In rowing, perfect synchronisation is important for optimal performance of a crew. Remarkably, a recent study on ergometers demonstrated that antiphase crew coordination might be mechanically more efficient by reducing the power lost to within-cycle velocity fluctuations of the boat. However, coupled oscillator dynamics predict the stability of the coordination to decrease with increasing stroke rate, which in case of antiphase may eventually yield breakdowns to in-phase. Therefore, this study examined the effects of increasing stroke rate on in- and antiphase crew coordination in rowing dyads. Eleven experienced dyads rowed on two mechanically coupled ergometers on slides, which allowed the ergometer system to move back and forth as one ‘boat’. The dyads performed a ramp trial in both in- and antiphase pattern, in which stroke rates gradually increased from 30 strokes per minute (spm) to as fast as possible in steps of 2 spm. Kinematics of rowers, handles and ergometers were captured. Two dyads showed a breakdown of antiphase into in-phase coordination at the first stroke rate of the ramp trial. The other nine dyads reached between 34–42 spm in antiphase but achieved higher rates in in-phase. As expected, the coordinative accuracy in antiphase was worse than in in-phase crew coordination, while, somewhat surprisingly, the coordinative variability did not differ between the patterns. Whereas crew coordination did not substantially deteriorate with increasing stroke rate, stroke rate did affect the velocity fluctuations of the ergometers: fluctuations were clearly larger in the in-phase pattern than in the antiphase pattern, and this difference significantly increased with stroke rate. Together, these results suggest that although antiphase rowing is less stable (i.e., less resistant to perturbation), potential on-water benefits of antiphase over in-phase rowing may actually increase with stroke rate. PMID:26185987

  6. Death row inmate characteristics, adjustment, and confinement: a critical review of the literature.

    PubMed

    Cunningham, Mark D; Vigen, Mark P

    2002-01-01

    This article reviews and summarizes research on death row inmates. The contributions and weaknesses of death row demographic data, clinical studies, and research based on institutional records are critiqued. Our analysis shows that death row inmates are overwhelmingly male and disproportionately Southern. Racial representation remains controversial. Frequently death row inmates are intellectually limited and academically deficient. Histories of significant neurological insult are common, as are developmental histories of trauma, family disruption, and substance abuse. Rates of psychological disorder among death row inmates are high, with conditions of confinement appearing to precipitate or aggravate these disorders. Contrary to expectation, the extant research indicates that the majority of death row inmates do not exhibit violence in prison even in more open institutional settings. These findings have implications for forensic mental health sentencing evaluations, competent attorney representation, provision of mental health services, racial disparity in death sentences, death row security and confinement policies, and moral culpability considerations. Future research directions on death row populations are suggested.

  7. Functional Outcomes After Double-Row Versus Single-Row Rotator Cuff Repair

    PubMed Central

    Nicholas, Stephen J.; Lee, Steven J.; Mullaney, Michael J.; Tyler, Timothy F.; Fukunaga, Takumi; Johnson, Christopher D.; McHugh, Malachy P.

    2016-01-01

    Background: The functional benefits of double-row (DR) versus single-row (SR) rotator cuff repair are not clearly established. Purpose: To examine the effect of DR versus SR rotator cuff repair on functional outcomes and strength recovery in patients with full-thickness tears. Study Design: Randomized controlled trial; Level of evidence, 2. Methods: Forty-nine patients were randomized to DR or SR repairs; 36 patients (13 women, 23 men; mean age, 62 ± 7 years; 20 SR, 16 DR) were assessed at a mean 2.2 ± 1.6 years after surgery (range, 1-7 years; tear size: 17 medium, 13 large, 9 massive). The following data were recorded prior to surgery and at follow-up: Penn shoulder score, American Shoulder and Elbow Surgeons (ASES), and Simple Shoulder Test (SST) results; range of motion (ROM) for shoulder flexion, external rotation (ER) at 0° and 90° of abduction, and internal rotation (IR) at 90° of abduction; and shoulder strength (Lafayette manual muscle tester) in empty- and full-can tests, abduction, and ER at 0° of abduction. Treatment (SR vs DR) × time (pre- vs postoperative) mixed-model analysis of variance was used to assess the effect of rotator cuff repair. Results: Rotator cuff repair markedly improved Penn, ASES, and SST scores (P < .001), with similar improvement between SR and DR repairs (treatment × time, P = .38-.10) and excellent scores at follow-up (DR vs SR: Penn, 91 ± 11 vs 92 ± 11 [P = .73]; ASES, 87 ± 12 vs 92 ± 12 [P = .21]; SST, 11.4 ± 1.0 vs 11.3 ± 1.0 [P = .76]). Patients with DR repairs lost ER ROM at 0° of abduction (preoperative to final follow-up, 7° ± 10° loss [P = .013]). ER ROM did not significantly change with SR repair (5° ± 14° gain, P = .16; treatment by time, P = .008). This effect was not apparent for ER ROM at 90° of abduction (treatment × time, P = .26). IR ROM improved from preoperative to final follow-up (P < .01; SR, 17° ± 27°; DR, 7° ± 21°; treatment × time, P = .23). Rotator cuff repair markedly

  8. 30 CFR 285.305 - How do I request an ROW grant or RUE grant?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false How do I request an ROW grant or RUE grant? 285... Obtaining Row Grants and Rue Grants § 285.305 How do I request an ROW grant or RUE grant? You must submit to MMS one paper copy and one electronic copy of a request for a new or modified ROW grant or RUE...

  9. Growth and yield of valencia, spanish, virginia and runner market type peanuts in various row spacings

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Currently, the majority of peanuts grown in New Mexico and West Texas are planted in single rows on beds 36 to 40 inches apart. In 2006-2008, several field studies were conducted with Valencia peanuts comparing single row, twin row, and diamond planting patterns in various populations. The basic c...

  10. 30 CFR 285.316 - What payments are required for ROW grants or RUE grants?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... RUE grants? 285.316 Section 285.316 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION... Renewable Energy Activities Financial Requirements for Row Grants and Rue Grants § 285.316 What payments are required for ROW grants or RUE grants? Before we issue the ROW grant or RUE grant, you must pay: (a)...

  11. 30 CFR 285.305 - How do I request an ROW grant or RUE grant?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I request an ROW grant or RUE grant? 285... and Rights-of-Use and Easement Grants for Renewable Energy Activities Obtaining Row Grants and Rue Grants § 285.305 How do I request an ROW grant or RUE grant? You must submit to MMS one paper copy...

  12. 30 CFR 285.309 - When will MMS issue a noncompetitive ROW grant or RUE grant?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When will MMS issue a noncompetitive ROW grant or RUE grant? 285.309 Section 285.309 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF... Obtaining Row Grants and Rue Grants § 285.309 When will MMS issue a noncompetitive ROW grant or RUE...

  13. 30 CFR 285.316 - What payments are required for ROW grants or RUE grants?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... RUE grants? 285.316 Section 285.316 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE... Requirements for Row Grants and Rue Grants § 285.316 What payments are required for ROW grants or RUE grants? Before we issue the ROW grant or RUE grant, you must pay: (a) Any balance on accepted high bids to...

  14. 30 CFR 585.316 - What payments are required for ROW grants or RUE grants?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... RUE grants? 585.316 Section 585.316 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF... Financial Requirements for Row Grants and Rue Grants § 585.316 What payments are required for ROW grants or RUE grants? Before we issue the ROW grant or RUE grant, you must pay: (a) Any balance on accepted...

  15. 30 CFR 585.316 - What payments are required for ROW grants or RUE grants?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... RUE grants? 585.316 Section 585.316 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF... Financial Requirements for Row Grants and Rue Grants § 585.316 What payments are required for ROW grants or RUE grants? Before we issue the ROW grant or RUE grant, you must pay: (a) Any balance on accepted...

  16. 30 CFR 585.309 - When will BOEM issue a noncompetitive ROW grant or RUE grant?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 2 2014-07-01 2014-07-01 false When will BOEM issue a noncompetitive ROW grant or RUE grant? 585.309 Section 585.309 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT... Obtaining Row Grants and Rue Grants § 585.309 When will BOEM issue a noncompetitive ROW grant or RUE...

  17. 30 CFR 585.301 - What do ROW grants and RUE grants include?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 2 2012-07-01 2012-07-01 false What do ROW grants and RUE grants include? 585... Rue Grants § 585.301 What do ROW grants and RUE grants include? (a) An ROW grant: (1) Includes the... station or other accessory facility. (b) An RUE grant includes the site on which a facility or...

  18. 30 CFR 585.301 - What do ROW grants and RUE grants include?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 2 2013-07-01 2013-07-01 false What do ROW grants and RUE grants include? 585... Rue Grants § 585.301 What do ROW grants and RUE grants include? (a) An ROW grant: (1) Includes the... station or other accessory facility. (b) An RUE grant includes the site on which a facility or...

  19. 30 CFR 585.309 - When will BOEM issue a noncompetitive ROW grant or RUE grant?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 2 2012-07-01 2012-07-01 false When will BOEM issue a noncompetitive ROW grant or RUE grant? 585.309 Section 585.309 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT... Obtaining Row Grants and Rue Grants § 585.309 When will BOEM issue a noncompetitive ROW grant or RUE...

  20. 30 CFR 585.301 - What do ROW grants and RUE grants include?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 2 2014-07-01 2014-07-01 false What do ROW grants and RUE grants include? 585... Rue Grants § 585.301 What do ROW grants and RUE grants include? (a) An ROW grant: (1) Includes the... station or other accessory facility. (b) An RUE grant includes the site on which a facility or...

  1. 30 CFR 585.309 - When will BOEM issue a noncompetitive ROW grant or RUE grant?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 2 2013-07-01 2013-07-01 false When will BOEM issue a noncompetitive ROW grant or RUE grant? 585.309 Section 585.309 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT... Obtaining Row Grants and Rue Grants § 585.309 When will BOEM issue a noncompetitive ROW grant or RUE...

  2. 30 CFR 585.316 - What payments are required for ROW grants or RUE grants?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... RUE grants? 585.316 Section 585.316 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF... Financial Requirements for Row Grants and Rue Grants § 585.316 What payments are required for ROW grants or RUE grants? Before we issue the ROW grant or RUE grant, you must pay: (a) Any balance on accepted...

  3. NETL CT Imaging Facility

    ScienceCinema

    None

    2016-07-12

    NETL's CT Scanner laboratory is equipped with three CT scanners and a mobile core logging unit that work together to provide characteristic geologic and geophysical information at different scales, non-destructively.

  4. NETL CT Imaging Facility

    SciTech Connect

    2013-09-04

    NETL's CT Scanner laboratory is equipped with three CT scanners and a mobile core logging unit that work together to provide characteristic geologic and geophysical information at different scales, non-destructively.

  5. CT appearance of splenosis

    SciTech Connect

    Mendelson, D.S.; Cohen, B.A.; Armas, R.R.

    1982-12-01

    Splenosis is an unusual complication of splenic trauma. The computed tomographic (CT) appearance of splenosis is described. One should consider this diagnosis when faced with a history of splenic trauma and multiple round or oval masses at CT.

  6. [ECG-gated bypass CT angiography--application in imaging arterial bypasses].

    PubMed

    Wintersperger, B J; Bastarrika, G; Nikolaou, K; Rist, C; Huber, A; Knez, A; Reiser, M F; Becker, C R; Vicol, C

    2004-02-01

    Nowadays coronary artery bypass grafting is increasingly performed using arterial grafts. Purpose of the study was the evaluation of a appropriate 16 detector-row CT angiography protocol in patients after predominantly arterial bypass grafting. Fourteen patients after bypass grafting were including into the study and CT angiography carried out in the early postoperative period using a 16 detector-row CT system. To reduce cardiac pulsation artifacts data acquisition was implemented using ECG-gating algorithms. Overall 43 grafts (37 arterial, 6 venous) were examined. In 13 patients surgery had been performed using composite grafts with T or TY configuration. The mean heart rate was 74.1 bpm and showed a negative correlation to the image quality (r=-0.65; p=0.01). However, all data sets were diagnostic. Contrast injection protocol allowed for a homogeneous opacification throughout the vessels of interest. All non-delineationable grafts (5) showed a close proximity to the heart (T or Y grafts). Cardiac surgery is increasingly focusing on arterial revascularisation in bypass grafting and therefore leading to new demands for non-invasive bypass graft imaging. 16 detector-row CT allows a reliable visualization of even composite arterial grafts. However, for detection of grafts in the proximity of the heart a reduction of the heart rate (<65-70) still seems to be necessary. PMID:14991132

  7. High Energy-Efficiency Retrofits to Baltimore's Row Homes

    SciTech Connect

    Chalk, J.; Johnson, A.L.; Lipscomb, L.; Wendt, R.

    1999-04-19

    The purpose of the research project is to develop high-perfommnce, energy-eflicient retrofits of existing row homes in Baltimore, Maryland. These efficiency enhancements are to optimize building envelope improvements, mechanical equipment improvements and operational improvements to the highest cost-effective level. Furthermore, this project is to investigate and demonstrate the impact of high-performance energy-efficiency retrofit improvements on row homes in the Historic East area of Baltimore. Three homes awaiting renovation are planned to receive building envelope, mechanical system, and electrical system improvements that will improve their energy petiormance. An incremental additional cost ceiling of $4000 for the energy eftlciency improvements, beyond those normally installed, has been set by the project.

  8. Monitoring and evaluation of rowing performance using mobile mapping data

    NASA Astrophysics Data System (ADS)

    Mpimis, A.; Gikas, V.

    2011-12-01

    Traditionally, the term mobile mapping refers to a means of collecting geospatial data using mapping sensors that are mounted on a mobile platform. Historically, this process was mainly driven by the need for highway infrastructure mapping and transportation corridor inventories. However, the recent advances in mapping sensor and telecommunication technologies create the opportunity that, completely new, emergent application areas of mobile mapping to evolve rapidly. This article examines the potential of mobile mapping technology (MMT) in sports science and in particular in competitive rowing. Notably, in this study the concept definition of mobile mapping somehow differs from the traditional one in a way that, the end result is not relevant to the geospatial information acquired as the moving platform travels in space. In contrast, the interest is placed on the moving platform (rowing boat) itself and on the various subsystems which are also in continuous motion.

  9. Missing-Row Contractive Reconstruction on Au(311)

    NASA Astrophysics Data System (ADS)

    Ercolessi, Furio; Tosatti, Erio

    All the low-index surfaces of gold are known to reconstruct, and their vicinals often exhibit magic orientations. The (311) orientation lies in between (100) and (111), and can be regarded as either a (111) or (100) vicinal with a very high step density, or as a flat open surface. In view of rather puzzling reconstructions observed experimentally [(1 × 4), (1 × 5), (1 × 6)], we have undertaken a structural study of Au(311) using the glue model and molecular-dynamics-based simulated annealing. The optical geometry is a (1 × 5) missing-row structure with (111) and reconstructed (100) microfacets, and an alternation of (1 × 2) and (1 × 3) hills. An extra atomic row is present on (1 × 3) hills to optimize packing. The experimentally observed disappearance of the reconstruction between 700 and 750 K is probably associated with an order-disorder transition similar to that of Au(110).

  10. A parallel householder tridiagonalization stratagem using scattered row decomposition

    NASA Technical Reports Server (NTRS)

    Chang, H. Y.; Utku, S.; Salama, M.; Rapp, D.

    1988-01-01

    Householder's method for tridiagonalizing a real symmetric matrix, a major step in evaluating eigenvalues of the matrix, is modified into a parallel algorithm for a concurrent machine of message passing type. Each processor of the concurrent machine has its own CPU, communications control and local memory. Messages are passed through connections between processors. Although the basic algorithm is inherently serial, the computations can be spread over all processors by scattering different rows of the matrix into processors, hence the term 'Scattered Row Decomposition'. The steps in the serial and the parallel algorithms are identified. Expressions for efficiency and speedup are given in terms of problem and machine parameters. For a concurrent machine of ring type interconnection, a selected representative problem of large order exhibits efficiency approaching 66 per cent.

  11. Marketing cardiac CT programs.

    PubMed

    Scott, Jason

    2010-01-01

    There are two components of cardiac CT discussed in this article: coronary artery calcium scoring (CACS) and coronary computed tomography angiography (CCTA).The distinctive advantages of each CT examination are outlined. In order to ensure a successful cardiac CT program, it is imperative that imaging facilities market their cardiac CT practices effectively in order to gain a competitive advantage in this valuable market share. If patients receive quality care by competent individuals, they are more likely to recommend the facility's cardiac CT program. Satisfied patients will also be more willing to come back for any further testing.

  12. A review of turbomachinery blade-row interaction research

    NASA Technical Reports Server (NTRS)

    Smith, Todd E.

    1988-01-01

    Analytical and experimental research in the area of unsteady aerodynamics of turbomachinery has conventionally been applied to blading which oscillates when placed in a uniformly flowing fluid. Comparatively less effort has been offered for the study of blading which is subjected to nonuniformities within the flow field. The fluid dynamic environment of a blade-row embedded within multi-stage turbomachines is dominated by such highly unsteady fluid flow conditions. The production of wakes and circumferential pressure variations from adjacent blade-rows causes large unsteady energy transfers between the fluid and the blades. Determination of the forced response of a blade requires the ability to predict the unsteady loads which are induced by these aerodynamic sources. A review of research publications was done to determine recent investigations of the response of turbomachinery blading subjected to aerodynamic excitations. Such excitations are a direct result of the blade-row aerodynamic interaction which occurs between adjacent cascades of blades. The reports and papers reviewed have been organized into areas emphasizing experimental or analytical efforts.

  13. Length to diameter ratio and row number effects in short pin fin heat transfer

    NASA Technical Reports Server (NTRS)

    Brigham, B. A.; Vanfossen, G. J.

    1982-01-01

    The relative effects of pin length to diameter ratio and of pin row geometry on the heat transfer from pin fins, was determined. Array averaged heat transfer coefficients on pin and endwall surfaces were measured for two configurations of staggered arrays of short pin fins (length to diameter ratio of 4). One configuration contained eight streamwise rows of pins, while the other contained only four rows. Results showed that both the 8-row and the 4-row configurations for an L sub p/D of 4, exhibit higher heat transfer than in similar tests on shorter pin fns (L sub p/D of 1/2 and 2). It was also found that for this L sub p/D ratio, the array averaged heat transfer was slightly higher with eight rows of staggered pins than with only four rows.

  14. Length to diameter ratio and row number effects in short pin fin heat transfer

    NASA Technical Reports Server (NTRS)

    Brigham, B. A.; Vanfossen, G. J.

    1984-01-01

    The relative effects of pin length to diameter ratio and of pin row geometry on the heat transfer from pin fins, was determined. Array averaged heat transfer coefficients on pin and endwall surfaces were measured for two configurations of staggered arrays of short pin fins (length to diameter ratio of 4). One configuration contained eight streamwise rows of pins, while the other contained only four rows. Results showed that both the 8-row and the 4-row configurations for an L sub p/D of 4, exhibit higher heat transfer than in similar tests on shorter pin fins (L sub p/D of 1/2 and 2). It was also found that for this L sub p/D ratio, the array averaged heat transfer was slightly higher with eight rows of staggered pins than with only four rows. Previously announced in STAR as N83-14431

  15. Tilted cone-beam reconstruction with row-wise fan-to-parallel rebinning.

    PubMed

    Hsieh, Jiang; Tang, Xiangyang

    2006-10-21

    Reconstruction algorithms for cone-beam CT have been the focus of many studies. Several exact and approximate reconstruction algorithms were proposed for step-and-shoot and helical scanning trajectories to combat cone-beam related artefacts. In this paper, we present a new closed-form cone-beam reconstruction formula for tilted gantry data acquisition. Although several algorithms were proposed in the past to combat errors induced by the gantry tilt, none of the algorithms addresses the scenario in which the cone-beam geometry is first rebinned to a set of parallel beams prior to the filtered backprojection. We show that the image quality advantages of the rebinned parallel-beam reconstruction are significant, which makes the development of such an algorithm necessary. Because of the rebinning process, the reconstruction algorithm becomes more complex and the amount of iso-centre adjustment depends not only on the projection and tilt angles, but also on the reconstructed pixel location. In this paper, we first demonstrate the advantages of the row-wise fan-to-parallel rebinning and derive a closed-form solution for the reconstruction algorithm for the step-and-shoot and constant-pitch helical scans. The proposed algorithm requires the 'warping' of the reconstruction matrix on a view-by-view basis prior to the backprojection step. We further extend the algorithm to the variable-pitch helical scans in which the patient table travels at non-constant speeds. The algorithm was tested extensively on both the 16- and 64-slice CT scanners. The efficacy of the algorithm is clearly demonstrated by multiple experiments.

  16. Split-Bolus Multidetector-Row Computed Tomography Technique for Characterization of Focal Liver Lesions in Oncologic Patients

    PubMed Central

    Scialpi, Michele; Pierotti, Luisa; Gravante, Sabrina; Rebonato, Alberto; Piscioli, Irene; D’Andrea, Alfredo; Schiavone, Raffaele; Palumbo, Barbara

    2016-01-01

    Background In oncologic patients, the liver is the most common target for metastases. An accurate detection and characterization of focal liver lesions in patients with known primary extrahepatic malignancy are essential to define management and prognosis. Objectives To assess the diagnostic accuracy of the split-bolus multidetector-row computed tomography (MDCT) protocol in the characterization of focal liver lesions in oncologic patients. Patients and Methods We retrospectively analyzed the follow-up split-bolus 64-detector row CT protocol in 36 oncologic patients to characterize focal liver lesions. The split-bolus MDCT protocol by intravenous injection of two boluses of contrast medium combines the hepatic arterial phase (HAP) and hepatic enhancement during the portal venous phase (PVP) in a single-pass. Results The split-bolus MDCT protocol detected 208 lesions and characterized 186 (89.4%) of them: typical hemangiomas (n = 9), atypical hemangiomas (n = 3), cysts (n = 78), hypovascular (n = 93) and hypervascular (n = 3) metastases. Twenty two (10.6%) hypodense lesions were categorized as indeterminate (≤5 mm). The mean radiation dose was 24.5±6.5 millisieverts (mSv). Conclusion The designed split-bolus MDCT technique can be proposed alternatively to triphasic MDCT and in a single-pass to PVP in the initial staging and in the follow-up respectively in oncologic patients.

  17. 30 CFR 585.310 - What is the effective date of an ROW grant or RUE grant?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... RUE grant? 585.310 Section 585.310 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF... Obtaining Row Grants and Rue Grants § 585.310 What is the effective date of an ROW grant or RUE grant? Your ROW grant or RUE grant becomes effective on the date established by BOEM on the ROW grant or RUE...

  18. 30 CFR 285.303 - How long will my ROW grant or RUE grant remain in effect?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false How long will my ROW grant or RUE grant remain... Renewable Energy Activities Row Grants and Rue Grants § 285.303 How long will my ROW grant or RUE grant remain in effect? Your ROW grant or RUE grant will remain in effect for as long as the...

  19. 30 CFR 585.303 - How long will my ROW grant or RUE grant remain in effect?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 2 2012-07-01 2012-07-01 false How long will my ROW grant or RUE grant remain... Row Grants and Rue Grants § 585.303 How long will my ROW grant or RUE grant remain in effect? Your ROW grant or RUE grant will remain in effect for as long as the associated activities are...

  20. 30 CFR 585.310 - What is the effective date of an ROW grant or RUE grant?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... RUE grant? 585.310 Section 585.310 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF... Obtaining Row Grants and Rue Grants § 585.310 What is the effective date of an ROW grant or RUE grant? Your ROW grant or RUE grant becomes effective on the date established by BOEM on the ROW grant or RUE...

  1. 30 CFR 585.310 - What is the effective date of an ROW grant or RUE grant?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... RUE grant? 585.310 Section 585.310 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF... Obtaining Row Grants and Rue Grants § 585.310 What is the effective date of an ROW grant or RUE grant? Your ROW grant or RUE grant becomes effective on the date established by BOEM on the ROW grant or RUE...

  2. 30 CFR 585.303 - How long will my ROW grant or RUE grant remain in effect?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 2 2013-07-01 2013-07-01 false How long will my ROW grant or RUE grant remain... Row Grants and Rue Grants § 585.303 How long will my ROW grant or RUE grant remain in effect? Your ROW grant or RUE grant will remain in effect for as long as the associated activities are...

  3. 180 degrees rotation of ciliary rows and its morphogenetic implications in Tetrahymena pyriformis.

    PubMed

    Ng, S F; Frankel, J

    1977-03-01

    With quasi-surgical techniques, longitudinal somatic ciliary rows in Tetrahymena pyriformis have been rotated 180 degrees. New structures formed in the rotated ciliary rows during growth and reproduction are disposed 180 degrees opposite to their normal positions or orientations, confirming the earlier findings of Beisson and Sonneborn on Paramecium. However, during cell fission the rotated ciliary rows exhibit abnormality in orientation along the fission zone; the configuration of these rows near the anterior end of the posterior product of fission is consequently affected. Rotated ciliary rows have been employed as a tool in the analysis of morphogenetic problems: (a) The contractile vacuole pore is normally located on the left side of a ciliary row; but it is on the right of inverted rows. Hence, the morphogenetic properties of the two sides of the ciliary row associated with the contractile vacuole pore are different and this difference is the sole determinative factor as to the side of the ciliary row on which the contractile vacuole pore is located. (b) The process that generates the rotated ciliary rows frequently also brings about the implantation of an extra band of longitudinal microtubules at a specific site on the cell surface. This extra structure is inheritable, which opens up opportunities for the study of microtubular assembly in vivo. PMID:403524

  4. Future generation CT imaging.

    PubMed

    Walter, Deborah; De Man, Bruno; Iatrou, Maria; Edic, Peter M

    2004-02-01

    X-ray CT technology has been available for more than 30 years, yet continued technological advances have kept CT imaging at the forefront of medical imaging innovation. Consequently, the number of clinical CT applications has increased steadily. Other imaging modalities might be superior to CT imaging for some specific applications, but no other single modality is more often used in chest imaging today. Future technological developments in the area of high-resolution detectors, high-capacity x-ray tubes, advanced reconstruction algorithms, and improved visualization techniques will continue to expand the imaging capability. Future CT imaging technology will combine improved imaging capability with advanced and specific computer-assisted tools, which will expand the usefulness of CT imaging in many areas.

  5. PET/CT artifacts.

    PubMed

    Blodgett, Todd M; Mehta, Ajeet S; Mehta, Amar S; Laymon, Charles M; Carney, Jonathan; Townsend, David W

    2011-01-01

    There are several artifacts encountered in positron emission tomography/computed tomographic (PET/CT) imaging, including attenuation correction (AC) artifacts associated with using CT for AC. Several artifacts can mimic a 2-deoxy-2-[18F] fluoro-d-glucose (FDG) avid malignant lesions and therefore recognition of these artifacts is clinically relevant. Our goal was to identify and characterize these artifacts and also discuss some protocol variables that may affect image quality in PET/CT.

  6. Esophageal carcinoma: CT findings

    SciTech Connect

    Quint, L.E.; Glazer, G.M.; Orringer, M.B.; Gross, B.H.

    1985-04-01

    Preoperative CT scans of 33 patients with esophageal cancer were reviewed to assess staging accuracy and define the role of CT in patients being considered for transhiatal blunt esophagectomy. Surgical and pathological verification was obtained in all cases. Only 13 tumors were staged correctly according to the TNM classification. In addition, CT was not useful in assessing resectability because of its low accuracy in evaluating aortic invasion and the fact that few patients had tracheobronchial or aortic invasion or hepatic metastases at presentation.

  7. 30 CFR 585.303 - How long will my ROW grant or RUE grant remain in effect?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 2 2014-07-01 2014-07-01 false How long will my ROW grant or RUE grant remain... Row Grants and Rue Grants § 585.303 How long will my ROW grant or RUE grant remain in effect? (a) Each ROW or RUE grant will have a preliminary term of 12 months from the date of issuance of the ROW or...

  8. CT angiography - chest

    MedlinePlus

    Computed tomography angiography - thorax; CTA - lungs; Pulmonary embolism - CTA chest; Thoracic aortic aneurysm - CTA chest; Venous thromboembolism - CTA lung; Blood clot - CTA lung; Embolus - CTA lung; CT ...

  9. The Energetic Assessment of Frictional Instability Based on Rowe's Theory

    NASA Astrophysics Data System (ADS)

    Hirata, M.; Muto, J.; Nagahama, H.

    2015-12-01

    Frictional instability that controls the occurrence of unstable slips has been related to (1) rate and state dependent friction law (Dieterich, 1979; Ruina, 1983) and (2) shear localization in a gouge layer (e.g., Byerlee et al., 1978; Logan et al., 1979). Ikari et al. (2011) indicated that the transitions of frictional parameters obtained from the rate and state dependent friction law involve shear localization. However, the underlining theoretical background for their link has been unknown. Therefore, in this study, we investigate their relation theoretically and experimentally based on Rowe's theory on constant minimum energy ratio (Rowe, 1962) describing particle deformations quantitatively by energetic analysis. In theoretical analysis using analytical dynamics and irreversible thermodynamics, the energetic criterion about frictional instability is obtained; unstable slip occurs at energy ratios below 1. In friction experiments using a gas medium apparatus, simulated fault gouge deforms obeying the Rowe's theory. Additionally, the energy ratios change gradually with shear and show below 1 before the occurrence of unstable slip. Moreover, energy ratios are derived from volume changes. Transition of energy ratios from increase to decrease, which has been confirmed at the end of compaction, indicates the onset of volume increase toward the occurrence of unstable slip. The volume increases likely correspond to the formation of R1-shears with open mode character, which occurs prior to the unstable slip. Shear localization leads to a change in internal friction angle which is a statistical parameter to constitute a energy ratio. In short, changes in internal friction angle play an important role in evolving from being frictionally stable to unstable. From these results, the physical and energetic background for their link between the frictional parameter and shear localization becomes clear.

  10. Plant, soil, and shadow reflectance components of row crops

    NASA Technical Reports Server (NTRS)

    Richardson, A. J.; Wiegand, C. L.; Gausman, H. W.; Cuellar, J. A.; Gerbermann, A. H.

    1975-01-01

    Data from the first Earth Resource Technology Satellite (LANDSAT-1) multispectral scanner (MSS) were used to develop three plant canopy models (Kubelka-Munk (K-M), regression, and combined K-M and regression models) for extracting plant, soil, and shadow reflectance components of cropped fields. The combined model gave the best correlation between MSS data and ground truth, by accounting for essentially all of the reflectance of plants, soil, and shadow between crop rows. The principles presented can be used to better forecast crop yield and to estimate acreage.

  11. Film cooling: case of double rows of staggered jets.

    PubMed

    Dorignac, E; Vullierme, J J; Noirault, P; Foucault, E; Bousgarbiès, J L

    2001-05-01

    An experimental investigation of film cooling of a wall in a case of double rows of staggered hot jets (65 degrees C) in an ambient air flow. The wall is heated at a temperature value between the one of the jets and the one of the main flow. Experiments have been carried out for different injection rates, the main flow velocity is maintained at 32 m/s. Association of the measures of temperature profiles by cold wire and the measures of wall temperature by infrared thermography allows us to describe the behaviour of the flows and to propose the best injection which assures a good cooling of the plate. PMID:11460645

  12. 9. Detail view of columns on first floor. This row ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Detail view of columns on first floor. This row of columns indicates the former location of the exterior mill wall before World War II era expansion. The unusual column and beam connection was a key part of the mill structural system patented by Providence, Rhode Island engineers Charles Praray and Charles Makepeace in 1894. Each column was originally located in the apex of triangular window bay, but not connected to the exterior wall. Modifications on the right side of each column support the beams of the addition. - Dixie Cotton Mill, 710 Greenville Street, La Grange, Troup County, GA

  13. Assessment of Renal Function in Patients with Unilateral Ureteral Obstruction Using Whole-Organ Perfusion Imaging with 320-Detector Row Computed Tomography

    PubMed Central

    Yu, Juan; Feng, You-Zhen; Xian, Zhao-Hui; Yang, Wen-Cai; Mo, Xu-Kai

    2015-01-01

    Background Obstructed nephropathy is a common complication of several disease processes. Accurate evaluation of the functional status of the obstructed kidney is important to achieve a good outcome. The purpose of this study was to investigate renal cortical and medullary perfusion changes associated with unilateral ureteral obstruction (UUO) using whole-organ perfusion imaging with 320-detector row computed tomography (CT). Methodology/Principle Findings Sixty-four patients with UUO underwent whole-organ CT perfusion imaging. Patients were divided into 3 groups, mild, moderate, and severe, based on hydronephrosis severity. Twenty sex- and age-matched patients without renal disease, who referred to abdominal CT, were chosen as control subjects. Mean cortical and medullary perfusion parameters of obstructed and contralateral kidneys were compared, and mean perfusion ratios between obstructed and contralateral kidneys were calculated and compared. Mean cortical or medullary blood flow (BF) and blood volume (BV) of the obstructed kidneys in the moderate UUO and BF, BV, and clearance (CL) in the severe UUO were significantly lower than those of the contralateral kidneys (p < 0.05). The mean cortical or medullary BF of the obstructed kidney in the moderate UUO, and BF, BV, and CL in the severe UUO were significantly lower than those of the kidneys in control subjects (p < 0.05). Mean cortical or medullary BF of the non-obstructed kidneys in the severe UUO were statistically greater than that of normal kidneys in control subjects (p < 0.05). An inverse correlation was observed between cortical and medullary perfusion ratios and grades of hydronephosis (p < 0.01). Conclusions/Significance Perfusion measurements of the whole kidney can be obtained with 320-detector row CT, and estimated perfusion ratios have potential for quantitatively evaluating UUO renal injury grades. PMID:25874690

  14. Can Row Spacing Influence Arthropod Communities in Soybean? Implications for Early and Late Planting.

    PubMed

    Buchanan, Amanda L; Zobel, Emily; Hinds, Jermaine; Rosario-Lebron, Armando; Hooks, Cerruti R R

    2015-06-01

    Row spacing in agricultural systems can influence crop yield as well as pest and predator abundances. Soybean (Glycine max L. Merrill) growers in Maryland typically plant in narrow (∼19 cm), medium (∼38 cm), or wide (∼76 cm)-spaced rows, and there is a general lack of information on how these row-spacing schemes influence arthropod abundance and soybean yields. A study was conducted during two growing seasons to determine the effect of soybean row spacing and planting date (early and late) on soybean arthropods and yield. Despite a great deal of variation in arthropod responses to row spacing, and interactions between row spacing and study year, leaf-feeding herbivores were generally more abundant in narrow-spaced soybeans. All arthropod functional groups were more abundant, and yield was greater in early-planted soybeans relative to late-planted soybeans. Potential causes and implications of these finding are discussed.

  15. Arthroscopic Double-Row Transosseous Equivalent Rotator Cuff Repair with a Knotless Self-Reinforcing Technique

    PubMed Central

    Mook, William R.; Greenspoon, Joshua A.; Millett, Peter J.

    2016-01-01

    Background: Rotator cuff tears are a significant cause of shoulder morbidity. Surgical techniques for repair have evolved to optimize the biologic and mechanical variables critical to tendon healing. Double-row repairs have demonstrated superior biomechanical advantages to a single-row. Methods: The preferred technique for rotator cuff repair of the senior author was reviewed and described in a step by step fashion. The final construct is a knotless double row transosseous equivalent construct. Results: The described technique includes the advantages of a double-row construct while also offering self reinforcement, decreased risk of suture cut through, decreased risk of medial row overtensioning and tissue strangulation, improved vascularity, the efficiency of a knotless system, and no increased risk for subacromial impingement from the burden of suture knots. Conclusion: Arthroscopic knotless double row rotator cuff repair is a safe and effective method to repair rotator cuff tears. PMID:27733881

  16. A DNA marker closely linked to the vrs1 locus (row-type gene) indicates multiple origins of six-rowed cultivated barley ( Hordeum vulgare L.).

    PubMed

    Tanno, K; Taketa, S; Takeda, K; Komatsuda, T

    2002-01-01

    The origin of six-rowed cultivated barley was studied using a DNA marker cMWG699 closely linked to the vrs1 locus. Restriction patterns of the PCR-amplified product of the cMWG699 locus were examined in 280 cultivated ( Hordeum vulgare ssp. vulgare) and 183 wild ( H. vulgare ssp. spontaneum) barleys. Nucleotide sequences of the PCR products were also examined in selected accessions. Six-rowed cultivated barleys were divided into two distinct groups, types I and II. Type I six-rowed cultivated barley was distributed widely while type II six-rowed cultivated barley was found only in the Mediterranean region. The type I sequence was also found in a wild barley accession from Turkmenistan whereas the type II sequence was also found in a two-rowed cultivated barley from North Africa and a wild barley from Morocco. These results suggested that the six-rowed type I and II barleys were derived from two-rowed type I and II barleys, respectively, by independent mutations at the vrs1 locus.

  17. 30 CFR 585.305 - How do I request an ROW grant or RUE grant?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 2 2014-07-01 2014-07-01 false How do I request an ROW grant or RUE grant? 585... Grants and Rue Grants § 585.305 How do I request an ROW grant or RUE grant? You must submit to BOEM one paper copy and one electronic copy of a request for a new or modified ROW grant or RUE grant. You...

  18. 30 CFR 585.305 - How do I request an ROW grant or RUE grant?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 2 2012-07-01 2012-07-01 false How do I request an ROW grant or RUE grant? 585... Grants and Rue Grants § 585.305 How do I request an ROW grant or RUE grant? You must submit to BOEM one paper copy and one electronic copy of a request for a new or modified ROW grant or RUE grant. You...

  19. 30 CFR 585.305 - How do I request an ROW grant or RUE grant?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 2 2013-07-01 2013-07-01 false How do I request an ROW grant or RUE grant? 585... Grants and Rue Grants § 585.305 How do I request an ROW grant or RUE grant? You must submit to BOEM one paper copy and one electronic copy of a request for a new or modified ROW grant or RUE grant. You...

  20. Muscle Synergies of Untrained Subjects during 6 min Maximal Rowing on Slides and Fixed Ergometer.

    PubMed

    Shaharudin, Shazlin; Zanotto, Damiano; Agrawal, Sunil

    2014-12-01

    The slides ergometer (SE) was an improvisation from fixed ergometer (FE) to bridge the gap of mechanics between ergometer rowing and on-water rowing. The specific mechanical constraints of these two types of ergometers may affect the pattern of muscle recruitment, coordination and adaptation. The main purpose of this study was to evaluate the muscle synergy during 6 minutes maximal rowing on slides (SE) and fixed ergometers (FE). The laterality of muscle synergy was also examined. Surface electromyography activity, power output, heart rate, stroke length and stroke rate were analyzed from nine physically active subjects to assess the rowing performance. Physically active subjects, who were not specifically trained in rowing, were chosen to exclude the training effect on muscle synergy. Principal component analysis (PCA) with varimax rotation was applied to extract muscle synergy. Three muscle synergies were sufficient to explain the majority of variance in SE (94.4 ± 2.2 %) and FE (92.8 ± 1.7 %). Subjects covered more rowing distance, exerted greater power output and attained higher maximal heart rate during rowing on SE than on FE. The results proved the flexibility of muscle synergy to adapt to the mechanical constraints. Rowing on SE emphasized on bi-articular muscles contrary to rowing on FE which relied on cumulative effect of trunk and upper limb muscles during propulsive phase. Key pointsThree muscle synergies were extracted during maximal rowing on both fixed and slides ergometerUntrained subjects emphasized leg muscles while rowing on SEUntrained subjects focused on back muscles during FE rowing. PMID:25435771

  1. CT of Gastric Emergencies.

    PubMed

    Guniganti, Preethi; Bradenham, Courtney H; Raptis, Constantine; Menias, Christine O; Mellnick, Vincent M

    2015-01-01

    Abdominal pain, nausea, and vomiting are common presenting symptoms among adult patients seeking care in the emergency department, and, with the increased use of computed tomography (CT) to image patients with these complaints, radiologists will more frequently encounter a variety of emergent gastric pathologic conditions on CT studies. Familiarity with the CT appearance of emergent gastric conditions is important, as the clinical presentation is often nonspecific and the radiologist may be the first to recognize gastric disease as the cause of a patient's symptoms. Although endoscopy and barium fluoroscopy remain important tools for evaluating patients with suspected gastric disease in the outpatient setting, compared with CT these modalities enable less comprehensive evaluation of patients with nonspecific complaints and are less readily available in the acute setting. Endoscopy is also more invasive than CT and has greater potential risks. Although the mucosal detail of CT is relatively poor compared with barium fluoroscopy or endoscopy, CT can be used with the appropriate imaging protocols to identify inflammatory conditions of the stomach ranging from gastritis to peptic ulcer disease. In addition, CT can readily demonstrate the various complications of gastric disease, including perforation, obstruction, and hemorrhage, which may direct further clinical, endoscopic, or surgical management. We will review the normal anatomy of the stomach and discuss emergent gastric disease with a focus on the usual clinical presentation, typical imaging appearance, and differentiating features, as well as potential imaging pitfalls.

  2. Directional reflectance factor distributions of a cotton row crop

    NASA Technical Reports Server (NTRS)

    Kimes, D. S.; Newcomb, W. W.; Schutt, J. B.; Pinter, P. J., Jr.; Jackson, R. D.

    1984-01-01

    The directional reflectance factor distribution spanning the entire exitance hemisphere was measured for a cotton row crop (Gossypium barbadense L.) with 39 percent ground cover. Spectral directional radiances were taken in NOAA satellite 7 AVHRR bands 1 and 2 using a three-band radiometer with restricted 12 deg full angle field of view at half peak power points. Polar co-ordinate system plots of directional reflectance factor distributions and three-dimensional computer graphic plots of scattered flux were used to study the dynamics of the directional reflectance factor distribution as a function of spectral band, geometric structure of the scene, solar zenith and azimuth angles, and optical properties of the leaves and soil. The factor distribution of the incomplete row crops was highly polymodal relative to that for complete vegetation canopies. Besides the enhanced reflectance for the antisolar point, a reflectance minimum was observed towards the forwardscatter direction in the principle plane of the sun. Knowledge of the mechanics of the observed dynamics of the data may be used to provide rigorous validation for two- or three-dimensional radiative transfer models, and is important in interpreting aircraft and satellite data where the solar angle varies widely.

  3. Yankee Rowe isotopics benchmark using MCNP-XT

    SciTech Connect

    Xu, Z.; Whitmer, C.

    2013-07-01

    The Yankee Rowe spent fuel isotopic data provides a valuable source to benchmark the burnup calculations as part of verification and validation (V and V) efforts for the TerraPower's Monte Carlo depletion code, MCNP-XT. A total of 71 fuel rods were selected in the Yankee Rowe isotopic measurements covering a burnup range up to 44 MWd/kg ({approx}4.4%) under both the asymptotic spectrum and the non-asymptotic spectrum. The MCNP-XT pin cell depletion provides a comparison against the asymptotic spectrum measurement; and full assembly depletion with 322 depletion materials provides comparisons against various non-asymptotic depletion conditions. All calculations are performed based on the recent ENDF/B-VII.O data. Furthermore, the Monte Carlo depletion uncertainties and biases were examined showing their effect as insignificant. The set of burnup calculations cover the scattered experimental measurements demonstrating excellent agreement with the measured values. This benchmark exercise demonstrates the depletion analysis capability of the MCNP-XT code and validates the low burnup range. (authors)

  4. Women's religious conversions on death row: theorizing religion and state.

    PubMed

    Cooey, P M

    2002-01-01

    Most scholars of religion who approach the phenomena associated with religious conversion in order to theorize religion tend to ignore the legal and political implications of the actual context in which conversion occurs for theorizing religion itself. Meanwhile, political and legal theorists who attend to the implications of executing convicted murderers who undergo religious conversion on death row err in a different direction. They virtually ignore the significance of the claims made by the converts and their associates about the conversion themselves for theorizing the state. Scholars across disciplines increasingly address issues of race, class, gender, and sexual orientation in respect to theorizing religion and theorizing the state independently of one another. At the same time, they do not seize the opportunity to incorporate their analyses into a wider study of the sociocultural production of religion and state in relation to each other. I examine the religious conversion of Karla Faye Tucker and Wanda Jean Allen on death row, as well as the scholarship that their convictions, conversions, and executions have generated across academic disciplines and fields. Close examination illustrates well the necessity for theorizing religion and the state in relation to one another in order to understand either adequately.

  5. Development of Magnetorheological Resistive Exercise Device for Rowing Machine

    PubMed Central

    Žiliukas, Pranas

    2016-01-01

    Training equipment used by professional sportsmen has a great impact on their sport performance. Most universal exercisers may help only to improve the general physical condition due to the specific kinematics and peculiar resistance generated by their loading units. Training of effective techniques and learning of psychomotor skills are possible only when exercisers conform to the movements and resistance typical for particular sports kinematically and dynamically. Methodology of developing a magnetorheological resistive exercise device for generating the desired law of passive resistance force and its application in a lever-type rowing machine are described in the paper. The structural parameters of a controllable hydraulic cylinder type device were found by means of the computational fluid dynamics simulation performed by ANSYS CFX software. Parameters describing the magnetorheological fluid as non-Newtonian were determined by combining numerical and experimental research of the resistance force generated by the original magnetorheological damper. A structural scheme of the device control system was developed and the variation of the strength of magnetic field that affects the magnetorheological fluid circulating in the device was determined, ensuring a variation of the resistance force on the oar handle adequate for the resistance that occurs during a real boat rowing stroke. PMID:27293479

  6. Development of Magnetorheological Resistive Exercise Device for Rowing Machine.

    PubMed

    Grigas, Vytautas; Šulginas, Anatolijus; Žiliukas, Pranas

    2015-01-01

    Training equipment used by professional sportsmen has a great impact on their sport performance. Most universal exercisers may help only to improve the general physical condition due to the specific kinematics and peculiar resistance generated by their loading units. Training of effective techniques and learning of psychomotor skills are possible only when exercisers conform to the movements and resistance typical for particular sports kinematically and dynamically. Methodology of developing a magnetorheological resistive exercise device for generating the desired law of passive resistance force and its application in a lever-type rowing machine are described in the paper. The structural parameters of a controllable hydraulic cylinder type device were found by means of the computational fluid dynamics simulation performed by ANSYS CFX software. Parameters describing the magnetorheological fluid as non-Newtonian were determined by combining numerical and experimental research of the resistance force generated by the original magnetorheological damper. A structural scheme of the device control system was developed and the variation of the strength of magnetic field that affects the magnetorheological fluid circulating in the device was determined, ensuring a variation of the resistance force on the oar handle adequate for the resistance that occurs during a real boat rowing stroke. PMID:27293479

  7. Statistical characteristics of streak artifacts on CT images: relationship between streak artifacts and mA s values.

    PubMed

    Imai, Kuniahru; Ikeda, Mitsuru; Enchi, Yukihiro; Niimi, Takanaga

    2009-02-01

    The purpose of this study is to investigate how streak artifacts on computed tomography (CT) images vary with reduction in radiation doses by assessing the quantitative relationship between the streak artifacts and milliampere-time product (mA s) values. A commercially available chest phantom was used to measure the streak artifacts on the CT images obtained using a 4- and 16-multidetector-row helical CT scanners with various mA s values at a constant tube voltage of 120 kVp. The cardiac slice image was employed as a target image for evaluating the streak artifacts on the CT image. Eighty parallel line segments with a length of 20 pixels were placed perpendicular to numerous streak artifacts on the cardiac slice image, and the largest difference between adjacent CT values in each of the 80 CT-value profiles of these line segments was employed as a feature variable of streak artifacts; these feature variables have been analyzed by the extreme value theory. The largest difference between adjacent CT values in each CT-value profile can be statistically modeled by a Gumbel distribution. Further, the maximum level of streak artifacts on CT images that will be tolerated for clinical use and low-dose CT screening examination was expected to be estimated using the location parameter in the Gumbel distribution.

  8. A detection method for streak artifacts and radiological noise in a non-uniform region in a CT image.

    PubMed

    Imai, Kuniharu; Ikeda, Mitsuru; Enchi, Yukihiro; Niimi, Takanaga

    2010-01-01

    By using the CT images obtained by subtracting two CT images acquired under the same conditions and slice locations, we have devised a method for detecting streak artifacts in non-uniform regions and only radiological noise components in CT images. A chest phantom was scanned using 16- and 64-multidetector row helical CT scanners with various mAs values at 120kVp. The upper lung slice image was employed as a target image for evaluating the streak artifacts and radiological noise. One hundred parallel line segments with a length of 80 pixels were placed on the subtracted CT image, and the largest CT value in each CT value profile was employed as a feature variable of the streak artifacts; these feature variables were analyzed with the extreme value theory (Gumbel distribution). To detect only the radiological noise, all CT values contained in the 100 line profile were plotted on normal probability paper and the standard deviation was estimated from the inclination of its fitted line for the CT value plots. The two detection methods devised in this study were able to evaluate the streak artifacts and radiological noise in the CT images with high accuracy.

  9. SNOMED CT in pathology.

    PubMed

    García-Rojo, Marcial; Daniel, Christel; Laurinavicius, Arvydas

    2012-01-01

    Pathology information systems have been using SNOMED II for many years, and in most cases, they are in a migration process to SNOMED CT. COST Action IC0604 (EURO-TELEPATH) has considered terminology normalization one of its strategic objectives. This paper reviews the use of SNOMED CT in healthcare, with a special focus in pathology. Nowadays, SNOMED CT is mainly used for concept search and coding of clinical data. Some ontological errors found in SNOMED CT are described. The Integrating the Healthcare Enterprise (IHE) initiative has fostered the use of SNOMED CT, also in Pathology, as recommended in the Supplement Anatomic Pathology Structured Reports of the IHE Anatomic Pathology Technical Framework. Rule governing concept post-coordination is also described. Some recent initiatives are trying to define a SNOMED CT subset for Pathology. The Spanish Society of Pathology has defined a subset for specimens and procedures in Pathology. Regarding diagnosis coding, the morphological abnormality sub-hierarchy of SNOMED CT need to be significantly extended and improved to become useful for pathologists. A consensus is needed to encode pathology reports with the adequate hierarchies and concepts. This will make the implementation of pathology structured reports more feasible.

  10. Design and testing of a tandem row pump inducer

    NASA Technical Reports Server (NTRS)

    Etter, R. J.

    1974-01-01

    The design and testing of a tandem row pump inducer having a supercavitating first stage with a 0.60 hub ratio is presented. The second stage tested was a helical impeller with a 0.70 hub ratio. A cubic arc transition was utilized to accomplish the hub change. The first stage had two blades and the free-vortex design approach was empirically modified based on previous experience. The recommended second stage design having four blades and using cambered blade section is presented but the model was not built or tested. The more simple helix was built instead to reduce cost. Data taken included head generation, cavitation observations and unsteady head fluctuations over the 0-100Hz range.

  11. Configuring bonds between first-row transition metals.

    PubMed

    Eisenhart, Reed J; Clouston, Laura J; Lu, Connie C

    2015-11-17

    Alfred Werner, who pioneered the field of coordination chemistry, envisioned coordination complexes as a single, transition metal atom at the epicenter of a vast ligand space. The idea that the locus of a coordination complex could be shared by multiple metals held together with covalent bonds would eventually lead to the discovery of the quadruple and quintuple bond, which have no analogues outside of the transition metal block. Metal-metal bonding can be classified into homometallic and heterometallic groups. Although the former is dominant, the latter is arguably more intriguing because of the inherently larger chemical space in which metal-metal bonding can be explored. In 2013, Lu and Thomas independently reported the isolation of heterometallic multiple bonds with exclusively first-row transition metals. Structural and theoretical data supported triply bonded Fe-Cr and Fe-V cores. This Account describes our continued efforts to configure bonds between first-row transition metals from titanium to copper. Double-decker ligands, or binucleating platforms that brace two transition metals in proximity, have enabled the modular synthesis of diverse metal-metal complexes. The resulting complexes are also ideal for investigating the effects of an "ancillary" metal on the properties and reactivities of an "active" metal center. A total of 38 bimetallic complexes have been compiled comprising 18 unique metal-metal pairings. Twenty-one of these bimetallics are strictly isostructural, allowing for a systematic comparison of metal-metal bonding. The nature of the chemical bond between first-row metals is remarkably variable and depends on two primary factors: the total d-electron count, and the metals' relative d-orbital energies. Showcasing the range of covalent bonding are a quintuply bonded (d-d)(10) Mn-Cr heterobimetallic and the singly bonded late-late pairings, e.g., Fe-Co, which adopt unusually high spin states. A long-term goal is to rationally tailor the

  12. Configuring bonds between first-row transition metals.

    PubMed

    Eisenhart, Reed J; Clouston, Laura J; Lu, Connie C

    2015-11-17

    Alfred Werner, who pioneered the field of coordination chemistry, envisioned coordination complexes as a single, transition metal atom at the epicenter of a vast ligand space. The idea that the locus of a coordination complex could be shared by multiple metals held together with covalent bonds would eventually lead to the discovery of the quadruple and quintuple bond, which have no analogues outside of the transition metal block. Metal-metal bonding can be classified into homometallic and heterometallic groups. Although the former is dominant, the latter is arguably more intriguing because of the inherently larger chemical space in which metal-metal bonding can be explored. In 2013, Lu and Thomas independently reported the isolation of heterometallic multiple bonds with exclusively first-row transition metals. Structural and theoretical data supported triply bonded Fe-Cr and Fe-V cores. This Account describes our continued efforts to configure bonds between first-row transition metals from titanium to copper. Double-decker ligands, or binucleating platforms that brace two transition metals in proximity, have enabled the modular synthesis of diverse metal-metal complexes. The resulting complexes are also ideal for investigating the effects of an "ancillary" metal on the properties and reactivities of an "active" metal center. A total of 38 bimetallic complexes have been compiled comprising 18 unique metal-metal pairings. Twenty-one of these bimetallics are strictly isostructural, allowing for a systematic comparison of metal-metal bonding. The nature of the chemical bond between first-row metals is remarkably variable and depends on two primary factors: the total d-electron count, and the metals' relative d-orbital energies. Showcasing the range of covalent bonding are a quintuply bonded (d-d)(10) Mn-Cr heterobimetallic and the singly bonded late-late pairings, e.g., Fe-Co, which adopt unusually high spin states. A long-term goal is to rationally tailor the

  13. 76 FR 41532 - Yankee Atomic Electric Company, Yankee Nuclear Power Station (Yankee-Rowe); Notice of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-14

    ... accordance with the NRC E-Filing rule (72 FR 49139, August 28, 2007). The E-Filing process requires... COMMISSION Yankee Atomic Electric Company, Yankee Nuclear Power Station (Yankee-Rowe); Notice of...-Rowe), currently held by Yankee Atomic Electric Company (YAEC), as owner and licensed operator...

  14. Building Generalized Inverses of Matrices Using Only Row and Column Operations

    ERIC Educational Resources Information Center

    Stuart, Jeffrey

    2010-01-01

    Most students complete their first and only course in linear algebra with the understanding that a real, square matrix "A" has an inverse if and only if "rref"("A"), the reduced row echelon form of "A", is the identity matrix I[subscript n]. That is, if they apply elementary row operations via the Gauss-Jordan algorithm to the partitioned matrix…

  15. Inter-row evapotranspiration in arid and humid wine-grape vineyards

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The architecture of wine-grape vineyards is characterized by tall plants (approx. 1.5 m) and widely spaced rows (approx. 3 m). This wide row spacing, developed to allow sunlight interception, air flow, and field operations, creates a complex system for water and energy budgets. Because of the wide r...

  16. Effects of an Aerobic Rowing Training Regimen in Young Adults with Down Syndrome.

    ERIC Educational Resources Information Center

    Varela, Ana Maria; Sardinha, Luis Bettencount; Pitetti, Kenneth H.

    2001-01-01

    Eight young adult males with Down syndrome received a 16-week rowing ergometry training regimen. Following training, no changes in cardiovascular fitness were found but participants did achieve significantly higher levels of work performance on both treadmill and rowing ergometer tests than did a control group. (Contains references.) (Author/DB)

  17. 30 CFR 285.309 - When will MMS issue a noncompetitive ROW grant or RUE grant?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... or RUE grant? 285.309 Section 285.309 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION... Renewable Energy Activities Obtaining Row Grants and Rue Grants § 285.309 When will MMS issue a noncompetitive ROW grant or RUE grant? If we approve or approve with conditions your GAP, we may offer you...

  18. The effects of color plastic mulches and row covers on the growth and yield of okra

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Okra [Abelmoschus esculentus (l.) Moench'Clemson Spineless'] was grown on an Orangeburg sandy loam soil in shorter, AL. Okra was direct seeded in single rows. The experiment consisted of twelve experimental treatments as follows: (1) Black plastic mulch (BPM) + spunbonded row cover (RC), (2) BPM, (3...

  19. 33 CFR 100.724 - Annual Augusta Invitational Rowing Regatta; Savannah River, Augusta, GA.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Rowing Regatta; Savannah River, Augusta, GA. 100.724 Section 100.724 Navigation and Navigable Waters... WATERS § 100.724 Annual Augusta Invitational Rowing Regatta; Savannah River, Augusta, GA. (a) Definitions. (1) Regulated area. The regulated area is formed by a line drawn directly across the Savannah...

  20. 33 CFR 100.724 - Annual Augusta Invitational Rowing Regatta; Savannah River, Augusta, GA.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Rowing Regatta; Savannah River, Augusta, GA. 100.724 Section 100.724 Navigation and Navigable Waters... WATERS § 100.724 Annual Augusta Invitational Rowing Regatta; Savannah River, Augusta, GA. (a) Definitions. (1) Regulated area. The regulated area is formed by a line drawn directly across the Savannah...

  1. 33 CFR 100.724 - Annual Augusta Invitational Rowing Regatta; Savannah River, Augusta, GA.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Rowing Regatta; Savannah River, Augusta, GA. 100.724 Section 100.724 Navigation and Navigable Waters... WATERS § 100.724 Annual Augusta Invitational Rowing Regatta; Savannah River, Augusta, GA. (a) Definitions. (1) Regulated area. The regulated area is formed by a line drawn directly across the Savannah...

  2. 33 CFR 100.724 - Annual Augusta Invitational Rowing Regatta; Savannah River, Augusta, GA.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Rowing Regatta; Savannah River, Augusta, GA. 100.724 Section 100.724 Navigation and Navigable Waters... WATERS § 100.724 Annual Augusta Invitational Rowing Regatta; Savannah River, Augusta, GA. (a) Definitions. (1) Regulated area. The regulated area is formed by a line drawn directly across the Savannah...

  3. 33 CFR 100.724 - Annual Augusta Invitational Rowing Regatta; Savannah River, Augusta, GA.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Rowing Regatta; Savannah River, Augusta, GA. 100.724 Section 100.724 Navigation and Navigable Waters... WATERS § 100.724 Annual Augusta Invitational Rowing Regatta; Savannah River, Augusta, GA. (a) Definitions. (1) Regulated area. The regulated area is formed by a line drawn directly across the Savannah...

  4. Rowing increases stroke volume and cardiac output to a greater extent than cycling.

    PubMed

    Horn, P; Ostadal, P; Ostadal, B

    2015-01-01

    Exercise stimulates increases in heart rate (HR), stroke volume (SV) and cardiac output (CO). These adaptive mechanisms are strongly dependent on the type of exercise. Both rowing and cycling are widely used for physical training worldwide; however, evidence regarding the differences in major hemodynamic parameters during rowing and cycling remains insufficient. Ten healthy male volunteers were randomly assigned to perform either a rowing or cycling exercise. After 20 min rest, the group who had rowed first performed the cycling exercise and vice versa. Exercise was performed at a power-to-weight ratio of 2 W/kg for 2 min. HR, SV, CO and blood pressure (BP) were measured noninvasively using pulse-wave analysis at baseline and immediately after each exercise. HR, SV and CO were significantly higher after exercise than at rest. Whereas HR was comparable between rowing and cycling, SV and CO were significantly higher after rowing than after cycling. BP was comparable among all three measurements. Rowing increased SV and CO to a greater extent than cycling, whereas HR and BP were not influenced by the type of exercise. Our data suggest that rowing leads to more extensive stimulation of cardiac contractility and/or decreases in peripheral vascular resistance compared with cycling. PMID:25317691

  5. Plastic Mulches and Row Covers on the grow and production of Summer Squash.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Summer squash [Cucurbita pepo (L) ‘Prelude II’] was grown on an Orangeburg sandy loam soil in Shorter, AL. The summer squash was direct seeded in single rows. The experiment consisted of twelve experimental treatments as follows: (1) Black plastic mulch (BPM) + spunbonded row cover (RC), (2) BPM, (...

  6. Important role of muscle carnosine in rowing performance.

    PubMed

    Baguet, Audrey; Bourgois, Jan; Vanhee, Lander; Achten, Eric; Derave, Wim

    2010-10-01

    The role of the presence of carnosine (β-alanyl-L-histidine) in millimolar concentrations in human skeletal muscle is poorly understood. Chronic oral β-alanine supplementation is shown to elevate muscle carnosine content and improve anaerobic exercise performance during some laboratory tests, mainly in the untrained. It remains to be determined whether carnosine loading can improve single competition-like events in elite athletes. The aims of the present study were to investigate if performance is related to the muscle carnosine content and if β-alanine supplementation improves performance in highly trained rowers. Eighteen Belgian elite rowers were supplemented for 7 wk with either placebo or β-alanine (5 g/day). Before and following supplementation, muscle carnosine content in soleus and gastrocnemius medialis was measured by proton magnetic resonance spectroscopy ((1)H-MRS) and the performance was evaluated in a 2,000-m ergometer test. At baseline, there was a strong positive correlation between 100-, 500-, 2,000-, and 6,000-m speed and muscle carnosine content. After β-alanine supplementation, the carnosine content increased by 45.3% in soleus and 28.2% in gastrocnemius. Following supplementation, the β-alanine group was 4.3 s faster than the placebo group, whereas before supplementation they were 0.3 s slower (P = 0.07). Muscle carnosine elevation was positively correlated to 2,000-m performance enhancement (P = 0.042 and r = 0.498). It can be concluded that the positive correlation between baseline muscle carnosine levels and rowing performance and the positive correlation between changes in muscle carnosine and performance improvement suggest that muscle carnosine is a new determinant of rowing performance. PMID:20671038

  7. Transfer of Complex Skill Learning from Virtual to Real Rowing

    PubMed Central

    Rauter, Georg; Sigrist, Roland; Koch, Claudio; Crivelli, Francesco; van Raai, Mark; Riener, Robert; Wolf, Peter

    2013-01-01

    Simulators are commonly used to train complex tasks. In particular, simulators are applied to train dangerous tasks, to save costs, and to investigate the impact of different factors on task performance. However, in most cases, the transfer of simulator training to the real task has not been investigated. Without a proof for successful skill transfer, simulators might not be helpful at all or even counter-productive for learning the real task. In this paper, the skill transfer of complex technical aspects trained on a scull rowing simulator to sculling on water was investigated. We assume if a simulator provides high fidelity rendering of the interactions with the environment even without augmented feedback, training on such a realistic simulator would allow similar skill gains as training in the real environment. These learned skills were expected to transfer to the real environment. Two groups of four recreational rowers participated. One group trained on water, the other group trained on a simulator. Within two weeks, both groups performed four training sessions with the same licensed rowing trainer. The development in performance was assessed by quantitative biomechanical performance measures and by a qualitative video evaluation of an independent, blinded trainer. In general, both groups could improve their performance on water. The used biomechanical measures seem to allow only a limited insight into the rowers' development, while the independent trainer could also rate the rowers' overall impression. The simulator quality and naturalism was confirmed by the participants in a questionnaire. In conclusion, realistic simulator training fostered skill gains to a similar extent as training in the real environment and enabled skill transfer to the real environment. In combination with augmented feedback, simulator training can be further exploited to foster motor learning even to a higher extent, which is subject to future work. PMID:24376518

  8. Transfer of complex skill learning from virtual to real rowing.

    PubMed

    Rauter, Georg; Sigrist, Roland; Koch, Claudio; Crivelli, Francesco; van Raai, Mark; Riener, Robert; Wolf, Peter

    2013-01-01

    Simulators are commonly used to train complex tasks. In particular, simulators are applied to train dangerous tasks, to save costs, and to investigate the impact of different factors on task performance. However, in most cases, the transfer of simulator training to the real task has not been investigated. Without a proof for successful skill transfer, simulators might not be helpful at all or even counter-productive for learning the real task. In this paper, the skill transfer of complex technical aspects trained on a scull rowing simulator to sculling on water was investigated. We assume if a simulator provides high fidelity rendering of the interactions with the environment even without augmented feedback, training on such a realistic simulator would allow similar skill gains as training in the real environment. These learned skills were expected to transfer to the real environment. Two groups of four recreational rowers participated. One group trained on water, the other group trained on a simulator. Within two weeks, both groups performed four training sessions with the same licensed rowing trainer. The development in performance was assessed by quantitative biomechanical performance measures and by a qualitative video evaluation of an independent, blinded trainer. In general, both groups could improve their performance on water. The used biomechanical measures seem to allow only a limited insight into the rowers' development, while the independent trainer could also rate the rowers' overall impression. The simulator quality and naturalism was confirmed by the participants in a questionnaire. In conclusion, realistic simulator training fostered skill gains to a similar extent as training in the real environment and enabled skill transfer to the real environment. In combination with augmented feedback, simulator training can be further exploited to foster motor learning even to a higher extent, which is subject to future work. PMID:24376518

  9. Computed Tomography (CT) -- Head

    MedlinePlus

    ... further information please consult the ACR Manual on Contrast Media and its references. The risk of serious allergic ... Angiography (CTA) Stroke Brain Tumors Computer Tomography (CT) Safety During Pregnancy Head and Neck Cancer X-ray, ...

  10. Computed Tomography (CT) -- Sinuses

    MedlinePlus

    ... further information please consult the ACR Manual on Contrast Media and its references. The risk of serious allergic ... X-ray, Interventional Radiology and Nuclear Medicine Radiation Safety Images related to Computed Tomography (CT) - Sinuses About ...

  11. Pelvic CT scan

    MedlinePlus

    CAT scan - pelvis; Computed axial tomography scan - pelvis; Computed tomography scan - pelvis; CT scan - pelvis ... creates detailed pictures of the body, including the pelvis and areas near the pelvis. The test may ...

  12. Pediatric CT Scans

    Cancer.gov

    The Radiation Epidemiology Branch and collaborators have initiated a retrospective cohort study to evaluate the relationship between radiation exposure from CT scans conducted during childhood and adolescence and the subsequent development of cancer.

  13. Leg CT scan

    MedlinePlus

    CAT scan - leg; Computed axial tomography scan - leg; Computed tomography scan - leg; CT scan - leg ... on film. Three-dimensional (3D) models of the leg can be created by adding the slices together. ...

  14. CT Colonography (Virtual Colonoscopy)

    MedlinePlus

    ... into the colon using a hand-held squeeze bulb. Sometimes an electronic pump is used to deliver ... When you enter the CT scanner room, special light lines may be seen projected onto your body, ...

  15. CT Angiography (CTA)

    MedlinePlus

    ... CT Angiography? Angiography is a minimally invasive medical test that helps physicians diagnose and treat medical conditions. Angiography uses one of three imaging technologies and, in most cases, a contrast material injection ...

  16. Significance of agricultural row structure on the microwave emissivity of soils

    NASA Technical Reports Server (NTRS)

    Promes, P. M.; Jackson, T. J.; O'Neill, P. E.

    1987-01-01

    A series of field experiments was carried out to extend the data base available for verifying agricultural row effect models of emissivity. The row effects model was used to simulate a data base from which an algorithm could be developed to account for row effects when the scene dielectric constant and small-scale roughness are unknown. One objective of the study was to quantify the significance of row structure and to develop a practical procedure for removing the effects of periodic row structure on the microwave emissivity of a soil in order to use the emissivity values to estimate the soil moisture. A second objective was to expand the data set available for model verification through field observations using a truck-mounted 1.4-GHz microwave radiometer.

  17. Symbolic Givens reduction and row-ordering in large sparse least squares problems

    SciTech Connect

    Ostrouchov, G.

    1987-05-01

    In the solution of large sparse least squares problems by Givens factorization, a preliminary symbolic step that determines a good processing order and a data structure for the matrix factor is used. In this paper, it is shown that a processing order equivalent to sequential processing by rows can be as good as any processing order using a single pivot row in each column. A notion of local acceptability in row-ordering is introduced and shown to reduce fill globally. Row-orderings satisfying this notion are essentially equivalent to sequential processing by rows and the nature of intermediate fill produced makes implicit representation of fill possible. This forms the basis for a symbolic Givens reduction algorithm that operates in a fixed data structure.

  18. Positive ions of the first- and second-row transition metal hydrides

    NASA Technical Reports Server (NTRS)

    Pettersson, Lars G. M.; Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.; Partridge, Harry

    1987-01-01

    Theoretical dissociation energies for the first- and second-row transition metal hydride positive ions are critically compared against recent experimental values obtained from ion beam reactive scattering methods. Theoretical spectroscopic parameters and dipole moments are presented for the ground and several low-lying excited states. The calculations employ large Gaussian basis sets and account for electron correlation using the single-reference single- and double-excitation configuration interaction and coupled-pair-functional methods. The Darwin and mass-velocity contributions to the relativistic energy are included in the all-electron calculations on the first-row systems using first-order perturbation theory, and in the second-row systems using the Hay and Wadt relativistic effective core potentials. The theoretical D(0) values for the second-row transition metal hydride positive ions should provide a critical measure of the experimental values, which are not as refined as many of those in the first transition row.

  19. Coordinated movement of the three rows of outer hair cells is essential for cochlear amplification

    NASA Astrophysics Data System (ADS)

    Murakoshi, Michio; Suzuki, Sho; Wada, Hiroshi

    2015-12-01

    The process known as cochlear amplification is realized by coordinated movement of the outer hair cells (OHCs) in response to changes in their membrane potential. In this process, the displacement amplitude of the basilar membrane (BM) is thought to be increased, thereby leading to the high sensitivity, wide dynamic range and sharp frequency selectivity of our hearing. Unfortunately, however, OHCs are vulnerable to noise exposure, ototoxic acid, aging and so on. Previous studies have shown that exposure to intense noise causes functional loss of OHCs from the innermost row (i.e., close to the modiolus) to the outermost row (i.e., close to the cochlear wall). On the contrary, by other traumatic stimuli such as ototoxic acid, aging and ischemia, such loss of OHCs has been reported to occur from the outermost row toward the innermost row. However, how the cochlear amplification changes when coordinated movement of OHCs is impaired, that is when the OHCs in one, two or all three rows have become dysfunctional, remains unclear. In the present study, therefore, a finite element (FE) model of the gerbil cochlea, which takes the motility of OHCs into account, was developed based on our previous FE model. Using this model, changes in the displacement amplitude of the BM due to the functional loss of OHCs in one, two or all three rows were investigated and the effects of incoordination of the three rows of OHCs on cochlear amplification were estimated. Results showed that the displacement amplitude of the BM significantly decreased when either the innermost row or the outermost row of OHCs lost its function, suggesting that all three rows of OHCs are required for cochlear amplification.

  20. Don't rock the boat: how antiphase crew coordination affects rowing.

    PubMed

    de Brouwer, Anouk J; de Poel, Harjo J; Hofmijster, Mathijs J

    2013-01-01

    It is generally accepted that crew rowing requires perfect synchronization between the movements of the rowers. However, a long-standing and somewhat counterintuitive idea is that out-of-phase crew rowing might have benefits over in-phase (i.e., synchronous) rowing. In synchronous rowing, 5 to 6% of the power produced by the rower(s) is lost to velocity fluctuations of the shell within each rowing cycle. Theoretically, a possible way for crews to increase average boat velocity is to reduce these fluctuations by rowing in antiphase coordination, a strategy in which rowers perfectly alternate their movements. On the other hand, the framework of coordination dynamics explicates that antiphase coordination is less stable than in-phase coordination, which may impede performance gains. Therefore, we compared antiphase to in-phase crew rowing performance in an ergometer experiment. Nine pairs of rowers performed a two-minute maximum effort in-phase and antiphase trial at 36 strokes min(-1) on two coupled free-floating ergometers that allowed for power losses to velocity fluctuations. Rower and ergometer kinetics and kinematics were measured during the trials. All nine pairs easily acquired antiphase rowing during the warm-up, while one pair's coordination briefly switched to in-phase during the maximum effort trial. Although antiphase interpersonal coordination was indeed less accurate and more variable, power production was not negatively affected. Importantly, in antiphase rowing the decreased power loss to velocity fluctuations resulted in more useful power being transferred to the ergometer flywheels. These results imply that antiphase rowing may indeed improve performance, even without any experience with antiphase technique. Furthermore, it demonstrates that although perfectly synchronous coordination may be the most stable, it is not necessarily equated with the most efficient or optimal performance.

  1. Effect of inter-row cultivation on soil CO2 emission in a peach plantation

    NASA Astrophysics Data System (ADS)

    Tóth, E.; Farkas, Cs.; Gelybó, Gy.; Lagzi, I.

    2012-04-01

    We examined the effect of inter-row cultivation on soil CO2 emission in a peach plantation planted in 1991. The soil is Ramann type brown forest soil /Mollic Cambisol/ developed on sandy loam. Every second row in the orchard is covered with undisturbed grass, and every other row is disked (depth: 12-15cm) with a two-three-week frequency. The humus content varies from 1,69% to 2,28% in the upper 20 cm layer, where the sand, loam and clay contents are 58%, 21% and 19 %, respectively. The average annual precipitation total is 570 mm (330 mm for the growing season) at the site. During the vegetation period of 2009 soil CO2 emission measurements were carried out with static chamber method in the differently managed rows. Parallel with CO2 measurements soil volumetric water content and soil temperature were also determined. Soil microbiological properties water-extractable organic carbon (WEOC) and water-extractable nitrogen (WEN) as well as substrate-induced respiration (SIR) were determined from disturbed soil samples collected on the first measurement day. The measured soil physical properties showed that different soil management practices influence soil water content, bulk density and soil temperature as well. Soil water content was higher in the grass covered row on 10 of the 13 measurement days, the difference - which reached 10 v% - was the highest on the warmest days. Soil temperature is also different in case of disked and grass covered rows, found to be lower in the grass covered rows on every measurement days. SIR, WEOC and WEN were all higher in the grass covered row (19.45 μg CO2-C g-1 soil 36.91 μg g-1 soil, 139.36 μg g-1 soil, respectively) than in the disked row (4.88 μg CO2-C g-1 soil 25.43 μg C g-1 soil, 61.25 μg N g-1 soil, respectively) in 2009. Soil CO2 emission also differed between the two rows, grass covered rows produced higher emission in all measurements days without exemption. The difference between CO2 fluxes from the two cultivation

  2. 77 FR 25077 - Special Local Regulation; Wy-Hi Rowing Regatta, Trenton Channel; Detroit River, Wyandotte, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-27

    ... SECURITY Coast Guard 33 CFR Part 100 RIN 1625-AA08 Special Local Regulation; Wy-Hi Rowing Regatta, Trenton... navigable waters immediately prior to, during, and immediately after the Wy-Hi Rowing Regatta. This special....35T09-0342 Special Local Regulation; Wy-Hi Rowing Regatta, Wyandotte, MI. (a) Regulated Area....

  3. 30 CFR 585.308 - How will BOEM conduct an auction for ROW grants and RUE grants?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... and RUE grants? 585.308 Section 585.308 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Obtaining Row Grants and Rue Grants § 585.308 How will BOEM conduct an auction for ROW grants and RUE grants... to comment; and (2) Conduct a competitive auction for issuing the ROW grant or RUE grant. The...

  4. 30 CFR 585.302 - What are the general requirements for ROW grant and RUE grant holders?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... and RUE grant holders? 585.302 Section 585.302 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Row Grants and Rue Grants § 585.302 What are the general requirements for ROW grant and RUE grant holders? (a) To acquire an ROW grant or RUE grant you must provide evidence that you meet...

  5. 30 CFR 585.315 - What deposits are required for a competitive ROW grant or RUE grant?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ROW grant or RUE grant? 585.315 Section 585.315 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Financial Requirements for Row Grants and Rue Grants § 585.315 What deposits are required for a competitive ROW grant or RUE grant? (a) You must make a deposit, as required in § 585.501(a), regardless...

  6. 30 CFR 585.302 - What are the general requirements for ROW grant and RUE grant holders?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... and RUE grant holders? 585.302 Section 585.302 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Row Grants and Rue Grants § 585.302 What are the general requirements for ROW grant and RUE grant holders? (a) To acquire an ROW grant or RUE grant you must provide evidence that you meet...

  7. 30 CFR 585.307 - How will BOEM determine whether competitive interest exists for ROW grants and RUE grants?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... interest exists for ROW grants and RUE grants? 585.307 Section 585.307 Mineral Resources BUREAU OF OCEAN... Renewable Energy Activities Obtaining Row Grants and Rue Grants § 585.307 How will BOEM determine whether competitive interest exists for ROW grants and RUE grants? To determine whether or not there is...

  8. 30 CFR 285.307 - How will MMS determine whether competitive interest exists for ROW grants and RUE grants?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... interest exists for ROW grants and RUE grants? 285.307 Section 285.307 Mineral Resources MINERALS... Renewable Energy Activities Obtaining Row Grants and Rue Grants § 285.307 How will MMS determine whether competitive interest exists for ROW grants and RUE grants? To determine whether or not there is...

  9. 30 CFR 585.302 - What are the general requirements for ROW grant and RUE grant holders?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... and RUE grant holders? 585.302 Section 585.302 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Row Grants and Rue Grants § 585.302 What are the general requirements for ROW grant and RUE grant holders? (a) To acquire an ROW grant or RUE grant you must provide evidence that you meet...

  10. 30 CFR 585.308 - How will BOEM conduct an auction for ROW grants and RUE grants?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... and RUE grants? 585.308 Section 585.308 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Obtaining Row Grants and Rue Grants § 585.308 How will BOEM conduct an auction for ROW grants and RUE grants... to comment; and (2) Conduct a competitive auction for issuing the ROW grant or RUE grant. The...

  11. 30 CFR 585.315 - What deposits are required for a competitive ROW grant or RUE grant?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ROW grant or RUE grant? 585.315 Section 585.315 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Financial Requirements for Row Grants and Rue Grants § 585.315 What deposits are required for a competitive ROW grant or RUE grant? (a) You must make a deposit, as required in § 585.501(a), regardless...

  12. 30 CFR 585.307 - How will BOEM determine whether competitive interest exists for ROW grants and RUE grants?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... interest exists for ROW grants and RUE grants? 585.307 Section 585.307 Mineral Resources BUREAU OF OCEAN... Renewable Energy Activities Obtaining Row Grants and Rue Grants § 585.307 How will BOEM determine whether competitive interest exists for ROW grants and RUE grants? To determine whether or not there is...

  13. 30 CFR 585.307 - How will BOEM determine whether competitive interest exists for ROW grants and RUE grants?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... interest exists for ROW grants and RUE grants? 585.307 Section 585.307 Mineral Resources BUREAU OF OCEAN... Renewable Energy Activities Obtaining Row Grants and Rue Grants § 585.307 How will BOEM determine whether competitive interest exists for ROW grants and RUE grants? To determine whether or not there is...

  14. 30 CFR 285.315 - What deposits are required for a competitive ROW grant or RUE grant?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ROW grant or RUE grant? 285.315 Section 285.315 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Renewable Energy Activities Financial Requirements for Row Grants and Rue Grants § 285.315 What deposits are required for a competitive ROW grant or RUE grant? (a) You must make a deposit, as required in §...

  15. 30 CFR 585.308 - How will BOEM conduct an auction for ROW grants and RUE grants?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... and RUE grants? 585.308 Section 585.308 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Obtaining Row Grants and Rue Grants § 585.308 How will BOEM conduct an auction for ROW grants and RUE grants... to comment; and (2) Conduct a competitive auction for issuing the ROW grant or RUE grant. The...

  16. 30 CFR 285.315 - What deposits are required for a competitive ROW grant or RUE grant?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ROW grant or RUE grant? 285.315 Section 285.315 Mineral Resources MINERALS MANAGEMENT SERVICE... Financial Requirements for Row Grants and Rue Grants § 285.315 What deposits are required for a competitive ROW grant or RUE grant? (a) You must make a deposit, as required in § 285.501(a), regardless...

  17. 30 CFR 285.308 - How will MMS conduct an auction for ROW grants and RUE grants?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... and RUE grants? 285.308 Section 285.308 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF... Obtaining Row Grants and Rue Grants § 285.308 How will MMS conduct an auction for ROW grants and RUE grants... comment; and (2) Conduct a competitive auction for issuing the ROW grant or RUE grant. The auction...

  18. 30 CFR 285.302 - What are the general requirements for ROW grant and RUE grant holders?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... and RUE grant holders? 285.302 Section 285.302 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Renewable Energy Activities Row Grants and Rue Grants § 285.302 What are the general requirements for ROW grant and RUE grant holders? (a) To acquire an ROW grant or RUE grant you must provide evidence that...

  19. 30 CFR 285.303 - How long will my ROW grant or RUE grant remain in effect?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How long will my ROW grant or RUE grant remain in effect? 285.303 Section 285.303 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE... Rue Grants § 285.303 How long will my ROW grant or RUE grant remain in effect? Your ROW grant or...

  20. 30 CFR 285.302 - What are the general requirements for ROW grant and RUE grant holders?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... and RUE grant holders? 285.302 Section 285.302 Mineral Resources MINERALS MANAGEMENT SERVICE... Row Grants and Rue Grants § 285.302 What are the general requirements for ROW grant and RUE grant holders? (a) To acquire an ROW grant or RUE grant you must provide evidence that you meet...

  1. 30 CFR 285.310 - What is the effective date of an ROW grant or RUE grant?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... RUE grant? 285.310 Section 285.310 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION... Renewable Energy Activities Obtaining Row Grants and Rue Grants § 285.310 What is the effective date of an ROW grant or RUE grant? Your ROW grant or RUE grant becomes effective on the date established by...

  2. 30 CFR 585.315 - What deposits are required for a competitive ROW grant or RUE grant?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ROW grant or RUE grant? 585.315 Section 585.315 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Financial Requirements for Row Grants and Rue Grants § 585.315 What deposits are required for a competitive ROW grant or RUE grant? (a) You must make a deposit, as required in § 585.501(a), regardless...

  3. 30 CFR 285.310 - What is the effective date of an ROW grant or RUE grant?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... RUE grant? 285.310 Section 285.310 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE... Grants and Rue Grants § 285.310 What is the effective date of an ROW grant or RUE grant? Your ROW grant or RUE grant becomes effective on the date established by MMS on the ROW grant or RUE...

  4. 30 CFR 285.307 - How will MMS determine whether competitive interest exists for ROW grants and RUE grants?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... interest exists for ROW grants and RUE grants? 285.307 Section 285.307 Mineral Resources BUREAU OF OCEAN... and Easement Grants for Renewable Energy Activities Obtaining Row Grants and Rue Grants § 285.307 How will MMS determine whether competitive interest exists for ROW grants and RUE grants? To...

  5. Evaluation of native bees as pollinators of cucurbit crops under floating row covers.

    PubMed

    Minter, Logan M; Bessin, Ricardo T

    2014-10-01

    Production of cucurbit crops presents growers with numerous challenges. Several severe pests and diseases can be managed through the use of rotation, trap cropping, mechanical barriers, such as row covers, and chemical applications. However, considerations must also be made for pollinating insects, as adequate pollination affects the quantity and quality of fruit. Insecticides may negatively affect pollinators; a concern enhanced in recent years due to losses in managed Apis melifera L. colonies. Row covers can be used in place of chemical control before pollination, but when removed, pests have access to fields along with the pollinators. If pollination services of native bees could be harnessed for use under continuous row covers, both concerns could be balanced for growers. The potential of two bee species which specialize on cucurbit flowers, Peponapis pruinosa Say and Xenoglossa strenua Cresson, were assessed under continuous row covers, employed over acorn squash. Experimental treatments included plots with either naturally or artificially introduced bees under row covers and control plots with row covers either permanently removed at crop flowering, or employed continuously with no added pollinating insects. Pests in plots with permanently removed row covers were managed using standard practices used in certified organic production. Marketable yields from plots inoculated with bees were indistinguishable from those produced under standard practices, indicating this system would provide adequate yields to growers without time and monetary inputs of insecticide applications. Additionally, application of this technique was investigated for muskmelon production and discussed along with considerations for farm management. PMID:25199100

  6. The effect of row structure on soil moisture retrieval accuracy from passive microwave data.

    PubMed

    Xingming, Zheng; Kai, Zhao; Yangyang, Li; Jianhua, Ren; Yanling, Ding

    2014-01-01

    Row structure causes the anisotropy of microwave brightness temperature (TB) of soil surface, and it also can affect soil moisture retrieval accuracy when its influence is ignored in the inversion model. To study the effect of typical row structure on the retrieved soil moisture and evaluate if there is a need to introduce this effect into the inversion model, two ground-based experiments were carried out in 2011. Based on the observed C-band TB, field soil and vegetation parameters, row structure rough surface assumption (Q p model and discrete model), including the effect of row structure, and flat rough surface assumption (Q p model), ignoring the effect of row structure, are used to model microwave TB of soil surface. Then, soil moisture can be retrieved, respectively, by minimizing the difference of the measured and modeled TB. The results show that soil moisture retrieval accuracy based on the row structure rough surface assumption is approximately 0.02 cm(3)/cm(3) better than the flat rough surface assumption for vegetated soil, as well as 0.015 cm(3)/cm(3) better for bare and wet soil. This result indicates that the effect of row structure cannot be ignored for accurately retrieving soil moisture of farmland surface when C-band is used.

  7. Stiffness matrix formulation for double row angular contact ball bearings: Analytical development and validation

    NASA Astrophysics Data System (ADS)

    Gunduz, Aydin; Singh, Rajendra

    2013-10-01

    Though double row angular contact ball bearings are widely used in industrial, automotive, and aircraft applications, the scientific literature on double row bearings is sparse. It is also shown that the stiffness matrices of two single row bearings may not be simply superposed to obtain the stiffness matrix of a double row bearing. To overcome the deficiency in the literature, a new, comprehensive, analytical approach is proposed based on the Hertzian theory for back-to-back, face-to-face, and tandem arrangements. The elements of the five-dimensional stiffness matrix for double row angular contact ball bearings are computed given either the mean bearing displacement or the mean load vector. The diagonal elements of the proposed stiffness matrix are verified with a commercial code for all arrangements under three loading scenarios. Some changes in stiffness coefficients are investigated by varying critical kinematic and geometric parameters to provide more insight. Finally, the calculated natural frequencies of a shaft-bearing experiment are successfully compared with measurements, thus validating the proposed stiffness formulation. For double row angular contact ball bearings, the moment stiffness and cross-coupling stiffness terms are significant, and the contact angle changes under loads. The proposed formulation is also valid for paired (duplex) bearings which behave as an integrated double row unit when the surrounding structural elements are sufficiently rigid.

  8. Evaluation of native bees as pollinators of cucurbit crops under floating row covers.

    PubMed

    Minter, Logan M; Bessin, Ricardo T

    2014-10-01

    Production of cucurbit crops presents growers with numerous challenges. Several severe pests and diseases can be managed through the use of rotation, trap cropping, mechanical barriers, such as row covers, and chemical applications. However, considerations must also be made for pollinating insects, as adequate pollination affects the quantity and quality of fruit. Insecticides may negatively affect pollinators; a concern enhanced in recent years due to losses in managed Apis melifera L. colonies. Row covers can be used in place of chemical control before pollination, but when removed, pests have access to fields along with the pollinators. If pollination services of native bees could be harnessed for use under continuous row covers, both concerns could be balanced for growers. The potential of two bee species which specialize on cucurbit flowers, Peponapis pruinosa Say and Xenoglossa strenua Cresson, were assessed under continuous row covers, employed over acorn squash. Experimental treatments included plots with either naturally or artificially introduced bees under row covers and control plots with row covers either permanently removed at crop flowering, or employed continuously with no added pollinating insects. Pests in plots with permanently removed row covers were managed using standard practices used in certified organic production. Marketable yields from plots inoculated with bees were indistinguishable from those produced under standard practices, indicating this system would provide adequate yields to growers without time and monetary inputs of insecticide applications. Additionally, application of this technique was investigated for muskmelon production and discussed along with considerations for farm management.

  9. Does management intensity in inter rows effect soil physical properties in Austrian and Romanian vineyards?

    NASA Astrophysics Data System (ADS)

    Bauer, Thomas; Strauss, Peter; Stiper, Katrin; Klipa, Vladimir; Popescu, Daniela; Winter, Silvia; Zaller, Johann G.

    2016-04-01

    Successful viticulture is mainly influenced by soil and climate. The availability of water during the growing season highly influences wine quality and quantity. To protect soil from being eroded most of the winegrowers keep the inter row zones of the vineyards green. Greening also helps to provide water-stress to the grapes for harvesting high quality wines. However, these greening strategies concerning the intensity of inter row management differ from farm to farm and are mainly based on personal experience of the winegrowers. However to what extent different inter row management practices affect soil physical properties are not clearly understood yet. To measure possible effects of inter row management in vineyards on soil physical parameters we selected paired vineyards with different inter row management in Austria and Romania. In total more than 7000 soil analysis were conducted for saturated and unsaturated hydraulic conductivity, soil water retention, water stable aggregates, total organic carbon, cation exchange capacity, potassium, phosphorous, soil texture, bulk density and water infiltration. The comparison between high intensity management with at least one soil disturbance per year, medium intensity with one soil disturbance every second inter row per year and low intensity management with no soil disturbance since at least 5 years indicates that investigated soil physical properties did not improve for the upper soil layer (3-8cm). This is in contrast to general perceptions of improved soil physical properties due to low intensity of inter row management, i.e. permanent vegetated inter rows. This may be attributed to long term and high frequency mechanical stress by agricultural machinery in inter rows.

  10. Characterization of Genome-Wide Variation in Four-Row Wax, a Waxy Maize Landrace with a Reduced Kernel Row Phenotype.

    PubMed

    Liu, Hanmei; Wang, Xuewen; Wei, Bin; Wang, Yongbin; Liu, Yinghong; Zhang, Junjie; Hu, Yufeng; Yu, Guowu; Li, Jian; Xu, Zhanbin; Huang, Yubi

    2016-01-01

    In southwest China, some maize landraces have long been isolated geographically, and have phenotypes that differ from those of widely grown cultivars. These landraces may harbor rich genetic variation responsible for those phenotypes. Four-row Wax is one such landrace, with four rows of kernels on the cob. We resequenced the genome of Four-row Wax, obtaining 50.46 Gb sequence at 21.87× coverage, then identified and characterized 3,252,194 SNPs, 213,181 short InDels (1-5 bp) and 39,631 structural variations (greater than 5 bp). Of those, 312,511 (9.6%) SNPs were novel compared to the most detailed haplotype map (HapMap) SNP database of maize. Characterization of variations in reported kernel row number (KRN) related genes and KRN QTL regions revealed potential causal mutations in fea2, td1, kn1, and te1. Genome-wide comparisons revealed abundant genetic variations in Four-row Wax, which may be associated with environmental adaptation. The sequence and SNP variations described here enrich genetic resources of maize, and provide guidance into study of seed numbers for crop yield improvement.

  11. Characterization of Genome-Wide Variation in Four-Row Wax, a Waxy Maize Landrace with a Reduced Kernel Row Phenotype

    PubMed Central

    Liu, Hanmei; Wang, Xuewen; Wei, Bin; Wang, Yongbin; Liu, Yinghong; Zhang, Junjie; Hu, Yufeng; Yu, Guowu; Li, Jian; Xu, Zhanbin; Huang, Yubi

    2016-01-01

    In southwest China, some maize landraces have long been isolated geographically, and have phenotypes that differ from those of widely grown cultivars. These landraces may harbor rich genetic variation responsible for those phenotypes. Four-row Wax is one such landrace, with four rows of kernels on the cob. We resequenced the genome of Four-row Wax, obtaining 50.46 Gb sequence at 21.87× coverage, then identified and characterized 3,252,194 SNPs, 213,181 short InDels (1–5 bp) and 39,631 structural variations (greater than 5 bp). Of those, 312,511 (9.6%) SNPs were novel compared to the most detailed haplotype map (HapMap) SNP database of maize. Characterization of variations in reported kernel row number (KRN) related genes and KRN QTL regions revealed potential causal mutations in fea2, td1, kn1, and te1. Genome-wide comparisons revealed abundant genetic variations in Four-row Wax, which may be associated with environmental adaptation. The sequence and SNP variations described here enrich genetic resources of maize, and provide guidance into study of seed numbers for crop yield improvement. PMID:27242868

  12. Diurnal changes in reflectance factor due to Sun-row direction interactions

    NASA Technical Reports Server (NTRS)

    Bauer, M. E. (Principal Investigator); Vanderbilt, V. C.; Kollenkark, J. C.; Biehl, L. L.; Robinson, B. F.; Ranson, K. J.

    1981-01-01

    Over a two year period, data were collected regarding the canopies of soybeans grown in rows in planter boxes placed on a turntable in an effort to investigate changes in the spectral reflectance factor related to row direction, Sun direction, soil background, and crop development stage. Results demonstrate that the direction of rows in a soybean canopy can affect the reflectance factor of the canopy by as much as 230%. The results for the red spectral region tend to support the validity of canopy reflectance models; results for the infrared region do not.

  13. Can 64-row computed tomography replace angiography after coronary bypass?

    PubMed

    Doi, Hirosato; Koshima, Ryuji; Suzuki, Masato; Takahashi, Ken; Yokoyama, Hiroichi; Yoshida, Naoya

    2008-12-01

    Multi-detector (64-row) computed tomography has become an alternative to coronary angiography to diagnose graft occlusion and stenosis after coronary artery bypass. We compared the power of evaluation of multi-detector computed tomography with that of conventional coronary angiography in 60 patients who underwent coronary artery bypass with 135 grafts and 210 graft anastomoses. The diagnostic power of multi-detector computed tomography for graft occlusion was: 100% (2/2) sensitivity, 98.5% (131/133) specificity, 50% (2/4) positive predictive value, and 100% (133/133) negative predictive value; there were no significant differences in rates of occlusion among the different types of graft. The diagnostic power of multi-detector computed tomography for stenosis of the graft anastomosis was: 100% (2/2) sensitivity, 95.1% (194/204) specificity, 16.6% (2/12) positive predictive value, and 100% (194/194) negative predictive value, with no significant differences among grafts. Multi-detector computed tomography permits evaluation of bypass grafts and is much less invasive for the patients. PMID:18984751

  14. Waiving death row appeals: whose right is it anyway?

    PubMed

    Weiss, K J

    1999-01-01

    Death row prisoners may elect to forgo appeals, thus hastening execution. There are many reasons for such a decision, including depression, psychosis, incompetence, conditions in prison, and others. Due to the gravity of the sentence, and the states' duty to ensure fairness, some jurisdictions impose restrictions on the waiver. An inmate who lacks trial competence may be subject to a habeas corpus hearing and the appointment of a "next friend," often a family member. Moreover, the Constitution forbids execution of the "insane." The decision, then, may be taken out of the inmate's hands. The author outlines the various tests for competence to waive appeals. The Pennsylvania case of Gary Heidnik (In re Heidnik, 112 F.3d 105 (3rd Cir. 1997); and In re Heidnik, 720 A.2d 1016 (Pa. 1998)) illustrates the issues surrounding waiver of appeals that concern psychiatrists, attorneys, and judges. Following a discussion of Heidnik and related cases, the author offers a proposal for a classification of types of inmates requesting waiver. PMID:10509946

  15. Application of Badger's rule to third row metal diatomics

    NASA Astrophysics Data System (ADS)

    Weisshaar, James C.

    1989-02-01

    We extend the range of applicability of Badger's rule, an empirical correlation between ωe and re, to diatomic molecules that include one or two metal atoms from the third row of the periodic table. For such M2 and MO species, the accuracy of the correlation competes with that of ab initio calculations in certain cases. We use the correlation along with experimental values of ωe to estimate re for two electronic states each of Cu+2 and of TiO+. For Cu+2, we obtain 2.35±0.10 Å for X 2Σ+g and 2.22±0.15 Å for the excited 2Π state at T0=1.143 eV. For TiO+, we obtain 1.54±0.05 Å for X 2Δ and 1.57±0.05 Å for the B 2Σ+ state at T0=1.39 eV.

  16. Waiving death row appeals: whose right is it anyway?

    PubMed

    Weiss, K J

    1999-01-01

    Death row prisoners may elect to forgo appeals, thus hastening execution. There are many reasons for such a decision, including depression, psychosis, incompetence, conditions in prison, and others. Due to the gravity of the sentence, and the states' duty to ensure fairness, some jurisdictions impose restrictions on the waiver. An inmate who lacks trial competence may be subject to a habeas corpus hearing and the appointment of a "next friend," often a family member. Moreover, the Constitution forbids execution of the "insane." The decision, then, may be taken out of the inmate's hands. The author outlines the various tests for competence to waive appeals. The Pennsylvania case of Gary Heidnik (In re Heidnik, 112 F.3d 105 (3rd Cir. 1997); and In re Heidnik, 720 A.2d 1016 (Pa. 1998)) illustrates the issues surrounding waiver of appeals that concern psychiatrists, attorneys, and judges. Following a discussion of Heidnik and related cases, the author offers a proposal for a classification of types of inmates requesting waiver.

  17. CEnPiT: Helical cardiac CT reconstruction

    SciTech Connect

    Bontus, Claas; Koken, Peter; Koehler, Thomas; Grass, Michael

    2006-08-15

    Computer tomography (CT) scanners with an increasing number of detector rows offer the potential of shorter scanning times. Nevertheless, the reconstruction problem becomes more challenging, since cone beam artifacts are likely to enter. Here, we consider helical cardiac CT. We analyze how a relationship can be established between exact reconstruction algorithms and the demand to perform a cardiac gating. Utilizing the redundancies requires the consideration of all kinds of Radon planes. For the reconstruction algorithm proposed here, we separate the data into two parts. The first part contains contributions of Radon planes, which are measured with a large number of redundancies. The second part contains the remaining contributions. As it turns out, the second part contributes rather to the low-frequency contents of trans-axial slices. Therefore, we propose to perform a gated back-projection only for the first part, while the second part is back-projected in an ungated way. Data from the complete source trajectory are employed in the reconstruction process in contrary to conventional helical cardiac reconstruction methods. Moreover, all different types of Radon planes are taken into account in the reconstruction, though an ECG-dependent cardiac gating is applied. The reconstruction results, which we present for clinical and simulated data, demonstrate the high potential of CEnPiT for helical cardiac CT with large cone angle systems.

  18. Optimized Parallelization for Nonlocal Means Based Low Dose CT Image Processing.

    PubMed

    Zhang, Libo; Yang, Benqiang; Zhuang, Zhikun; Hu, Yining; Chen, Yang; Luo, Limin; Shu, Huazhong

    2015-01-01

    Low dose CT (LDCT) images are often significantly degraded by severely increased mottled noise/artifacts, which can lead to lowered diagnostic accuracy in clinic. The nonlocal means (NLM) filtering can effectively remove mottled noise/artifacts by utilizing large-scale patch similarity information in LDCT images. But the NLM filtering application in LDCT imaging also requires high computation cost because intensive patch similarity calculation within a large searching window is often required to be used to include enough structure-similarity information for noise/artifact suppression. To improve its clinical feasibility, in this study we further optimize the parallelization of NLM filtering by avoiding the repeated computation with the row-wise intensity calculation and the symmetry weight calculation. The shared memory with fast I/O speed is also used in row-wise intensity calculation for the proposed method. Quantitative experiment demonstrates that significant acceleration can be achieved with respect to the traditional straight pixel-wise parallelization.

  19. Spreadsheet Calculations for Jets in Crossflow: Opposed Rows of Inline and Staggered Holes and Single and Opposed Rows with Alternating Hole Sizes

    NASA Technical Reports Server (NTRS)

    Holdeman, James D.; Clisset, James R.; Moder, Jeffrey P.

    2010-01-01

    The primary purpose of this jet-in-crossflow study was to calculate expected results for two configurations for which limited or no experimental results have been published: (1) cases of opposed rows of closely-spaced jets from inline and staggered round holes and (2) rows of jets from alternating large and small round holes. Simulations of these configurations were performed using an Excel (Microsoft Corporation) spreadsheet implementation of a NASA-developed empirical model which had been shown in previous publications to give excellent representations of mean experimental scalar results suggesting that the NASA empirical model for the scalar field could confidently be used to investigate these configurations. The supplemental Excel spreadsheet is posted with the current report on the NASA Glenn Technical Reports Server (http://gltrs.grc.nasa.gov) and can be accessed from the Supplementary Notes section as TM-2010-216100-SUPPL1.xls. Calculations for cases of opposed rows of jets with the orifices on one side shifted show that staggering can improve the mixing, particularly for cases where jets would overpenetrate slightly if the orifices were in an aligned configuration. The jets from the larger holes dominate the mixture fraction for configurations with a row of large holes opposite a row of smaller ones although the jet penetration was about the same. For single and opposed rows with mixed hole sizes, jets from the larger holes penetrated farther. For all cases investigated, the dimensionless variance of the mixture fraction decreased significantly with increasing downstream distance. However, at a given downstream distance, the variation between cases was small.

  20. A computerized scheme for localization of vertebral bodies on body CT scans

    NASA Astrophysics Data System (ADS)

    Hayashi, Tatsuro; Chen, Huayue; Miyamoto, Kei; Zhou, Xiangrong; Hara, Takeshi; Yokoyama, Ryujiro; Kanematsu, Masayuki; Hoshi, Hiroaki; Fujita, Hiroshi

    2011-03-01

    The multidetector row computed tomography (MDCT) method has the potential to be used for quantitative analysis of osteoporosis with higher accuracy and precision than that provided by conventional two-dimensional methods. It is desirable to develop a computer-assisted scheme for analyzing vertebral geometry using body CT images. The aim of this study was to design a computerized scheme for the localization of vertebral bodies on body CT images. Our new scheme involves the following steps: (i) Re-formation of CT images on the basis of the center line of the spinal canal to visually remove the spinal curvature, (ii) use of information on the position of the ribs relative to the vertebral bodies, (iii) the construction of a simple model on the basis of the contour of the vertebral bodies on CT sections, and (iv) the localization of individual vertebral bodies by using a template matching technique. The proposed scheme was applied to 104 CT cases, and its performance was assessed using the Hausdorff distance. The average Hausdorff distance of T2-L5 was 4.3 mm when learning models with 100 samples were used. On the other hand, the average Hausdorff distance with 10 samples was 5.1 mm. The results of our assessments confirmed that the proposed scheme could provide the location of individual vertebral bodies. Therefore, the proposed scheme may be useful in designing a computer-based application that analyzes vertebral geometry on body CT images.

  1. Single-slice reconstruction method for helical cone-beam differential phase-contrast CT.

    PubMed

    Fu, Jian; Chen, Liyuan

    2014-01-01

    X-ray phase-contrast computed tomography (PC-CT) can provide the internal structure information of biomedical specimens with high-quality cross-section images and has become an invaluable analysis tool. Here a simple and fast reconstruction algorithm is reported for helical cone-beam differential PC-CT (DPC-CT), which is called the DPC-CB-SSRB algorithm. It combines the existing CB-SSRB method of helical cone-beam absorption-contrast CT with the differential nature of DPC imaging. The reconstruction can be performed using 2D fan-beam filtered back projection algorithm with the Hilbert imaginary filter. The quality of the results for large helical pitches is surprisingly good. In particular, with this algorithm comparable quality is obtained using helical cone-beam DPC-CT data with a normalized pitch of 10 to that obtained using the traditional inter-row interpolation reconstruction with a normalized pitch of 2. This method will push the future medical helical cone-beam DPC-CT imaging applications.

  2. Row Spacing, Tillage System, and Herbicide Technology Affects Cotton Plant Growth and Yield

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Cotton (Gossypium hirsutum L.) producers are faced with numerous production choices including cotton varieties, herbicide technology, tillage systems, and row spacing. A study was conducted to compare cotton production across conventional, glyphosate tolerant, and glufosinate tolerant varieties in ...

  3. Pyogenic myositis: CT evaluation

    SciTech Connect

    Tumeh, S.S.; Butler, G.J.; Maguire, J.H.; Nagel, J.S.

    1988-11-01

    Computed tomography and gallium scintigraphy uncovered clinically occult muscle infection in eight patients. The CT findings included enlargement of the muscle, effacement of the intramuscular fat planes, fluid density, rim enhancement, and involvement of the underlying bone. Computed tomography suggested the diagnosis in seven of eight cases. Gallium scintigraphy was positive in all seven cases in which it was performed.

  4. ROWS wave spectral data collected in SAXON-FPN, November 1990

    NASA Technical Reports Server (NTRS)

    Jackson, F.; Vandemark, D.; Bailey, S.; Vaughn, C.; Hines, D.; Ward, J.; Stewart, K.; Chapron, B.

    1993-01-01

    High-resolution directional wave spectra obtained with the NASA Ku-band radar ocean wave spectrometer (ROWS) on the Naval Research Laboratory P-3 aircraft during SAXON-FPN (SAR and X-Band Ocean Nonlinearities Experiment-Forschungsplattform Nordsee) experiments in the North Sea in November 1990 are presented. This experiment was the first in which the ROWS was operated with its new pc-based high-speed digital data acquisition system.

  5. Analysis of anaerobic capacity in rowers using Wingate test on cycle and rowing ergometer.

    PubMed

    Klasnja, Aleksandar; Barak, Otto; Popadić-Gaćesa, Jelena; Drapsin, Miodrag; Knezević, Aleksandar; Grujić, Nikola

    2010-01-01

    The 30-s all-out Wingate test has been used in athletes of all sport specialties to measure the capacity for short duration, high power output while cycling. The aim of this study was to establish differences in measuring anaerobic capacity between the classic Wingate test on a cycling ergometer and the modified Wingate test on a rowing ergometer in rowers. A group of20 rowers was tested by both the cycle and rowing ergometers during 30s of maximum power to test anaerobic capacity and to make correlation between these tests. The parameters measured were the peak power and mean power. The peak power on the cycling ergometer was 475 +/- 75.1W and 522.4 +/- 81W (p < 0.05) on the rowing ergometer. The mean power on the cycling ergometer and the rowing ergometer was 344.4 +/- 51.1W and 473.7W +/- 67.2, (p < 0.05) respectively. The maximum values were achieved at the same time on both ergometers, but remained on the higher level till the end of the test on the rowing ergometer. By correlating the anaerobic parameters of the classic Wingate test and a modified Wingate test on the rowing ergometer a significant positive correlation was detected in the peak power (r = 0.63, p < 0.05) as well as in the mean power (r = 0.65, p < 0.05). The results show that the rowers achieved better results of the anaerobic parameters on the rowing ergometer compared to the cycling ergometer due to a better mechanical efficiency. It is concluded that the modified Wingate test on the rowing ergometer can be used in rowers for testing their anaerobic capacity as a sport specific test ergometer since it provides more precise results.

  6. Seventh-generation CT

    NASA Astrophysics Data System (ADS)

    Besson, G. M.

    2016-03-01

    A new dual-drum CT system architecture has been recently introduced with the potential to achieve significantly higher temporal resolution than is currently possible in medical imaging CT. The concept relies only on known technologies; in particular rotation speeds several times higher than what is possible today could be achieved leveraging typical x-ray tube designs and capabilities. However, the architecture lends itself to the development of a new arrangement of x-ray sources in a toroidal vacuum envelope containing a rotating cathode ring and a (optionally rotating) shared anode ring to potentially obtain increased individual beam power as well as increase total exposure per rotation. The new x-ray source sub-system design builds on previously described concepts and could make the provision of multiple conventional high-power cathodes in a CT system practical by distributing the anode target between the cathodes. In particular, relying on known magnetic-levitation technologies, it is in principle possible to more than double the relative speed of the electron-beam with respect to the target, thus potentially leading to significant individual beam power increases as compared to today's state-of-the-art. In one embodiment, the proposed design can be naturally leveraged by the dual-drum CT concept previously described to alleviate the problem of arranging a number of conventional rotating anode-stem x-ray tubes and power conditioners on the limited space of a CT gantry. In another embodiment, a system with three cathodes is suggested leveraging the architecture previously proposed by Franke.

  7. Technical aspects of CT scanning.

    PubMed

    Maravilla, K R; Pastel, M S

    1978-01-01

    The advent of computed tomography (CT) has initiated a technological revolution which continues to the present time. A brief review of basic principles of CT scanning is presented, and the evolution of modern CT scanner systems is traced. Some early indications of future trends are also presented.

  8. Influence of foot-stretcher height on rowing technique and performance.

    PubMed

    Buckeridge, Erica M; Weinert-Aplin, Robert A; Bull, Anthony M J; McGregor, Alison H

    2016-11-01

    Strength, technique, and coordination are crucial to rowing performance, but external interventions such as foot-stretcher set-up can fine-tune technique and optimise power output. For the same resultant force, raising the height of foot-stretchers on a rowing ergometer theoretically alters the orientation of the resultant force vector in favour of the horizontal component. This study modified foot-stretcher heights and examined their instantaneous effect on foot forces and rowing technique. Ten male participants rowed at four foot-stretcher heights on an ergometer that measured handle force, stroke length, and vertical and horizontal foot forces. Rowers were instrumented with motion sensors to measure ankle, knee, hip, and lumbar-pelvic kinematics. Key resultant effects of increased foot-stretcher heights included progressive reductions in horizontal foot force, stroke length, and pelvis range of motion. Raising foot-stretcher height did not increase the horizontal component of foot force as previously speculated. The reduced ability to anteriorly rotate the pelvis at the front of the stroke may be a key obstacle in gaining benefits from raised foot-stretcher heights. This study shows that small changes in athlete set-up can influence ergometer rowing technique, and rowers must individually fine-tune their foot-stretcher height to optimise power transfer through the rowing stroke on an ergometer. PMID:27256844

  9. Influence of foot-stretcher height on rowing technique and performance.

    PubMed

    Buckeridge, Erica M; Weinert-Aplin, Robert A; Bull, Anthony M J; McGregor, Alison H

    2016-11-01

    Strength, technique, and coordination are crucial to rowing performance, but external interventions such as foot-stretcher set-up can fine-tune technique and optimise power output. For the same resultant force, raising the height of foot-stretchers on a rowing ergometer theoretically alters the orientation of the resultant force vector in favour of the horizontal component. This study modified foot-stretcher heights and examined their instantaneous effect on foot forces and rowing technique. Ten male participants rowed at four foot-stretcher heights on an ergometer that measured handle force, stroke length, and vertical and horizontal foot forces. Rowers were instrumented with motion sensors to measure ankle, knee, hip, and lumbar-pelvic kinematics. Key resultant effects of increased foot-stretcher heights included progressive reductions in horizontal foot force, stroke length, and pelvis range of motion. Raising foot-stretcher height did not increase the horizontal component of foot force as previously speculated. The reduced ability to anteriorly rotate the pelvis at the front of the stroke may be a key obstacle in gaining benefits from raised foot-stretcher heights. This study shows that small changes in athlete set-up can influence ergometer rowing technique, and rowers must individually fine-tune their foot-stretcher height to optimise power transfer through the rowing stroke on an ergometer.

  10. Effects of Row-Type, Row-Spacing, Seeding Rate, Soil-Type, and Cultivar Differences on Soybean Seed Nutrition under US Mississippi Delta Conditions.

    PubMed

    Bellaloui, Nacer; Bruns, Herbert A; Abbas, Hamed K; Mengistu, Alemu; Fisher, Daniel K; Reddy, Krishna N

    2015-01-01

    The new Early Soybean Production System (ESPS), developed in the Midsouth USA, including the Mississippi delta, resulted in higher yield under irrigated and non-irrigated conditions. However, information on the effects of the agricultural practices such as row-type (RT: twin- vs. single-row), row-spacing, (RS), seeding rate (SR), soil-type (ST) on seed nutrition under the ESPS environment in the Mississippi delta is very limited. Our previous research in the Mississippi delta showed these agricultural practices altered seed nutrients in one cultivar only. However, whether these effects on seed nutrients will be exhibited by other soybean cultivars with earlier and later maturities across multiple years are not yet known. Therefore, the objective of this research was to evaluate the effects of agricultural practices and cultivar (Cv) differences on seed nutrition in clay and sandy soils under ESPS environment of high heat and drought. Two field experiments were conducted; one experiment was conducted in 2009 and 2010, and the other in 2008, 2009, and 2010 under irrigated conditions. Soybean were grown on 102 cm single-rows and on 25 cm twin-rows with 102 cm centers at seeding rates of 20, 30, 40, and 50 seeds m(-2). Two soybean cultivars (94M80 with earlier maturity; and GP 533 with later maturity) were used. Results showed that increasing seeding rate resulted in increases of protein, sucrose, glucose, raffinose, B, and P concentrations on both single- and twin-rows. However, this increase became either constant or declined at the higher rates (40 and 50 seeds m(-2)). Protein and linolenic acid concentrations were higher in GP 533 than in 94M80 on both row-types, but oil and oleic acid concentrations were in 94M80 than GP 533. Generally, cultivar GP 533 accumulated more seed constituents in seeds than 94M80. In 2010, there were no clear responses of seed nutrients to SR increase in both cultivars, perhaps due to drier year and high heat in 2010. It is concluded

  11. Development and performance evaluation of an experimental fine pitch detector multislice CT scanner

    SciTech Connect

    Imai, Yasuhiro; Nukui, Masatake; Ishihara, Yotaro; Fujishige, Takashi; Ogata, Kentaro; Moritake, Masahiro; Kurochi, Haruo; Ogata, Tsuyoshi; Yahata, Mitsuru; Tang Xiangyang

    2009-04-15

    The authors have developed an experimental fine pitch detector multislice CT scanner with an ultrasmall focal spot x-ray tube and a high-density matrix detector through current CT technology. The latitudinal size of the x-ray tube focal spot was 0.4 mm. The detector dimension was 1824 channels (azimuthal direction)x32 rows (longitudinal direction) at row width of 0.3125 mm, in which a thinner reflected separator surrounds each detector cell coupled with a large active area photodiode. They were mounted on a commercial 64-slice CT scanner gantry while the scan field of view (50 cm) and gantry rotation speed (0.35 s) can be maintained. The experimental CT scanner demonstrated the spatial resolution of 0.21-0.22 mm (23.8-22.7 lp/cm) with the acrylic slit phantom and in-plane 50%-MTF 9.0 lp/cm and 10%-MTF 22.0 lp/cm. In the longitudinal direction, it demonstrated the spatial resolution of 0.24 mm with the high-resolution insert of the CATPHAN phantom and 0.34 mm as the full width at half maximum of the slice sensitivity profile. In low-contrast detectability, 3 mm at 0.3% was visualized at the CTDI{sub vol} of 47.2 mGy. Two types of 2.75 mm diameter vessel phantoms with in-stent stenosis at 25%, 50%, and 75% stair steps were scanned, and the reconstructed images can clearly resolve the stenosis at each case. The experimental CT scanner provides high-resolution imaging while maintaining low-contrast detectability, demonstrating the potentiality for clinical applications demanding high spatial resolution, such as imaging of inner ear, lung, and bone, or low-contrast detectability, such as imaging of coronary artery.

  12. Sports biomechanics in the research of the Department of Biomechanics of University School of Physical Education in Poznań. Part 1. Biomechanics of rowing: tests on rowing ergometers, reconstruction and synthesis.

    PubMed

    Dworak, Lechosław B

    2010-01-01

    The purpose of this study is to reconstruct the early phase of scientific research conducted at the Department of Biomechanics of the University School of Physical Education in Poznan, particularly the work on biomechanics of rowing, conducted as part of the Ministerial Project PR 105, entitled "The effectiveness of training and competition as well as regeneration in sports". Three kinds of research have been described, carried out with the use of the rowing ergometers. The first was the research on neuromuscular coordination in the rowing cycle, the second was the research on kinematic and dynamic characteristics of rowing on the Universal Rowing Ergometer UEW - 1, while the last one concerned determination of maximum forces generated by functional muscle groups in two characteristic rowing positions within the closed biochain of the torso and the limbs.

  13. Post-processing and display in multislice CT of the chest.

    PubMed

    Beigelman-Aubry, C

    2007-01-01

    The last generations of Multi Detector Row CT (MDCT) have revolutionized the management of chest disease. This is especially obvious for airway and lung parenchyma evaluation. MDCT allows volumetric high resolution scanning with isotropic resolution. Thus, contiguous visualization of the lung parenchyma is achieved. The resulting high quality 2D and 3D reconstructions enable a significant improvement in the diagnostic approach. Since the lung parenchyma has a unique natural contrast, low and even ultra-low radiation dose scanning protocols may be used in routine practice. In all cases, a good signal to noise ratio has to be maintained combined with the best possible spatial resolution, allowing all types of reconstructions.

  14. Determinants of 2,000 m rowing ergometer performance in elite rowers.

    PubMed

    Ingham, S A; Whyte, G P; Jones, K; Nevill, A M

    2002-12-01

    This study examined the physiological determinants of performance during rowing over 2,000 m on an ergometer in finalists from World Championship rowing or sculling competitions from all categories of competion rowing (19 male and 13 female heavyweight, 4 male and 5 female lightweight). Discontinuous incremental rowing to exhaustion established the blood lactate threshold, maximum oxygen consumption (VO(2max)) and power at VO(2max); five maximal strokes assessed maximal force, maximal power and stroke length. These results were compared to maximal speed during a 2,000 m ergometer time trial. The strongest correlations were for power at VO(2max), maximal power and maximal force (r=0.95; P<0.001). Correlations were also observed for VO(2max) (r=0.88, P<0.001) and oxygen consumption (VO(2)) at the blood lactate threshold (r=0.87, P=0.001). The physiological variables were included in a stepwise regression analysis to predict performance speed (metres per second). The resultant model included power at VO(2max), VO(2) at the blood lactate threshold, power at the 4 mmol x l(-1) concentration of blood lactate and maximal power which together explained 98% of the variance in the rowing performance over 2,000 m on an ergometer. The model was validated in 18 elite rowers, producing limits of agreement from -0.006 to 0.098 m x s(-1) for speed of rowing over 2,000 m on the ergometer, equivalent to times of -1.5 to 6.9 s (-0.41% to 1.85%). Together, power at VO(2max), VO(2) at the blood lactate threshold, power at 4 mmol x l(-1) blood lactate concentration and maximal power could be used to predict rowing performance.

  15. ASSOCIATION BETWEEN ROWING INJURIES AND THE FUNCTIONAL MOVEMENT SCREEN™ IN FEMALE COLLEGIATE DIVISION I ROWERS

    PubMed Central

    Mansell, Jamie; Tierney, Ryan

    2016-01-01

    ABSTRACT Background 48 percent of rowing injuries are due to overuse and occur more often in females. The Functional Movement Screen™ (FMS) is a screening tool utilized to identify the risk of musculoskeletal injury in field sport athletes based on movement patterns. It has not been used to identify risk of injury in rowing. Objectives The purpose of this study was to determine if the scores on the FMS™ are predictors of incidence of all injuries, including low back pain (LBP) in female collegiate rowers during one season of rowing. Methods Prospective cohort conducted in a clinical setting. Thirty-seven Division I female collegiate rowers (33 rowers and 4 coxswains). Investigators performed pre-season FMS™ screening and collected demographic data, rowing data, and Oswestry Low Back Pain questionnaire scores. Based on FMS™ scores, individuals were grouped high or low risk for injury. Injury reports and patient complaints of LBP over the course of a season were compared to FMS™ group. Results Those in the high risk group were significantly more likely to experience LBP during the season (p=.036) and reported a 58 percent greater mean in years of rowing experience (p=.008) than individuals in the low risk group. Those with a history of LBP were six times more likely to experience LBP during season (p=.027). Discussion The FMS™ indicated that rowers at a high risk of injury and more years of rowing experience, have a higher probability of sustaining LBP. Results could be due to chronic overuse associated with the rowing motion. Low back pain was evident in 25 out of the 37 participants over the season. Conclusion While the FMS™ has been proven to predict injury in field athletes, there was no statistically significant evidence to support prediction of a reported time loss injury in female collegiate rowers. However, it did indicate a higher likelihood for subjective report of low back pain. Level of Evidence Cohort study, level 2b PMID:27274420

  16. The Influence of Rotation, Tillage and Row Spacing on Near-Surface Soil Temperature for Winter Wheat in Southern Alberta

    SciTech Connect

    Larney, F. J.; Ren, Tennis L.; McGinn, Sean M.; Lindwall, C W.; Izaurralde, R Cesar C.

    2003-02-01

    The influence of rotation, tillage and row spacing on near-surface soil temperature for winter wheat in southern Alberta. Rotation, tillage and row spacing and their effects on surface residue levels can modify soil temperature. Our study investigated the effect of rotation, tillage and row spacing on near-surface (0.025 m) soil temperature under winter wheat (Triticum aestivum L.) in 1993-94 and 1994-95.

  17. Representation of egomotion in rat's trident and E-row whisker cortices.

    PubMed

    Chorev, Edith; Preston-Ferrer, Patricia; Brecht, Michael

    2016-10-01

    The whisker trident, a three-whisker array on the rat's chin, has been implicated in egomotion sensing and might function as a tactile speedometer. Here we study the cortical representation of trident whiskers and E-row whiskers in barrel cortex. Neurons identified in trident cortex of anesthetized animals showed sustained velocity-sensitive responses to ground motion. In freely moving animals, about two-thirds of the units in the trident and E-row whisker cortices were tuned to locomotion speed, a larger fraction of speed-tuned cells than in the somatosensory dysgranular zone. Similarly, more units were tuned to acceleration and showed sensitivity to turning in trident and E-row whisker cortices than in the dysgranular zone. Microstimulation in locomoting animals evoked small but significant speed changes, and such changes were larger in the trident and E-row whisker representations than in the dysgranular zone. Thus, activity in trident and E-row cortices represents egomotion information and influences locomotion behavior. PMID:27526205

  18. A Straight-bladed Vertical Axis Wind Turbine with a Directed Guide Vane Row

    NASA Astrophysics Data System (ADS)

    Takao, Manabu; Maeda, Takao; Kamada, Yasunari; Oki, Michiaki; Kuma, Hideki

    A straight-bladed vertical axis wind turbine with a directed guide vane row has been proposed in order to enhance its torque. The experimental study of the proposed wind turbine was carried out by a wind tunnel with an outlet diameter of 1.8m. The tested rotor has some straight rotor blades with a profile of NACA0015, a diameter of 0.6 m and a height of 0.7 m. The guide vane row having 3 arc plates rotates around the rotor and is directed to the wind by aerodynamic force generated by tail vanes, so as to put the guide vane row in upstream of the rotor. As a result, the performance of the straight-bladed vertical axis turbine was improved by means of the directed guide vane row. Further, by the use of the guide vane row adopted in the study, the power coefficient of the proposed wind turbine was approximately 1.5 times higher than that of the original wind turbine which has no guide vane.

  19. Built for rowing: frog muscle is tuned to limb morphology to power swimming

    PubMed Central

    Richards, Christopher T.; Clemente, Christofer J.

    2013-01-01

    Rowing is demanding, in part, because drag on the oars increases as the square of their speed. Hence, as muscles shorten faster, their force capacity falls, whereas drag rises. How do frogs resolve this dilemma to swim rapidly? We predicted that shortening velocity cannot exceed a terminal velocity where muscle and fluid torques balance. This terminal velocity, which is below Vmax, depends on gear ratio (GR = outlever/inlever) and webbed foot area. Perhaps such properties of swimmers are ‘tuned’, enabling shortening speeds of approximately 0.3Vmax for maximal power. Predictions were tested using a ‘musculo-robotic’ Xenopus laevis foot driven either by a living in vitro or computational in silico plantaris longus muscle. Experiments verified predictions. Our principle finding is that GR ranges from 11.5 to 20 near the predicted optimum for rowing (GR ≈ 11). However, gearing influences muscle power more strongly than foot area. No single morphology is optimal for producing muscle power. Rather, the ‘optimal’ GR decreases with foot size, implying that rowing ability need not compromise jumping (and vice versa). Thus, despite our neglect of additional forces (e.g. added mass), our model predicts pairings of physiological and morphological properties to confer effective rowing. Beyond frogs, the model may apply across a range of size and complexity from aquatic insects to human-powered rowing. PMID:23676897

  20. A row-column addressed micromachined ultrasonic transducer array for surface scanning applications.

    PubMed

    Wong, Lawrence L P; Chen, Albert I H; Li, Zhenhao; Logan, Andrew S; Yeow, John T W

    2014-12-01

    Row-column addressed arrays for ultrasonic non-destructive testing (NDT) applications are analyzed and demonstrated in this paper. Simulation and experimental results of a row-column addressed 32 by 32 capacitive micromachined ultrasonic transducer (CMUT) array are presented. The CMUT array, which was designed for medical imaging applications, has a center frequency of 5.3MHz. The CMUT array was used to perform C-scans on test objects with holes that have diameters of 1.0mm and 0.5mm. The array transducer has an aperture size of 4.8mm by 4.8mm, and it was used to scan an area of 4.0mm by 4.0mm. Compared to an N by N fully addressed 2-D array, a row-column addressed array of the same number of elements requires fewer (N instead of N(2)) pairs of interconnection and supporting electronic components such as pulsers and amplifiers. Even though the resulting field of view is limit by the aperture size, row-column addressed arrays and the row-column addressing scheme can be an alternative option of 2-D arrays for NDT applications.

  1. A comparison of electromyography and stroke kinematics during ergometer and on-water rowing.

    PubMed

    Fleming, Neil; Donne, Bernard; Mahony, Nicholas

    2014-01-01

    This study assessed muscle recruitment patterns and stroke kinematics during ergometer and on-water rowing to validate the accuracy of rowing ergometry. Male rowers (n = 10; age 21 ± 2 years, height 1.90 ± 0.05 m and body mass 83.3 ± 4.8 kg) performed 3 × 3 min exercise bouts, at heart and stroke rates equivalent to 75, 85 and 95% VO2peak, on both dynamic and stationary rowing ergometers, and on water. During exercise, synchronised data for surface electromyography (EMG) and 2D kinematics were recorded. Overall muscle activity was quantified by the integration of rmsEMG and averaged for each 10% interval of the stroke cycle. Muscle activity significantly increased in rectus femoris (RF) and vastus medialis (VM) (P <0.01), as exercise intensity increased. Comparing EMG data across conditions revealed significantly (P <0.05) greater RF and VM activity during on-water rowing at discrete 10% intervals of stroke cycle. In addition, the drive/recovery ratio was significantly lower during dynamic ergometry compared to on-water (40 ± 1 vs. 44 ± 1% at 95%, P <0.01). Results suggest that significant differences exist while comparing recruitment and kinematic patterns between on-water and ergometer rowing. These differences may be due to altered acceleration and deceleration of moving masses on-ergometer not perfectly simulating the on-water scenario.

  2. Experiments in dilution jet mixing effects of multiple rows and non-circular orifices

    NASA Technical Reports Server (NTRS)

    Holdeman, J. D.; Srinivasan, R.; Coleman, E. B.; Meyers, G. D.; White, C. D.

    1985-01-01

    Experimental and empirical model results are presented that extend previous studies of the mixing of single-sided and opposed rows of jets in a confined duct flow to include effects of non-circular orifices and double rows of jets. Analysis of the mean temperature data obtained in this investigation showed that the effects of orifice shape and double rows are significant only in the region close to the injection plane, provided that the orifices are symmetric with respect to the main flow direction. The penetration and mixing of jets from 45-degree slanted slots is slightly less than that from equivalent-area symmetric orifices. The penetration from 2-dimensional slots is similar to that from equivalent-area closely-spaced rows of holes, but the mixing is slower for the 2-D slots. Calculated mean temperature profiles downstream of jets from non-circular and double rows of orifices, made using an extension developed for a previous empirical model, are shown to be in good agreement with the measured distributions.

  3. Higher rate of fat oxidation during rowing compared with cycling ergometer exercise across a range of exercise intensities.

    PubMed

    Egan, B; Ashley, D T; Kennedy, E; O'Connor, P L; O'Gorman, D J

    2016-06-01

    The relative contribution of carbohydrate and fat oxidation to energy expenditure during exercise is dependent on variables including exercise intensity, mode, and recruited muscle mass. This study investigated patterns of substrate utilization during two non-weightbearing exercise modalities, namely cycling and rowing. Thirteen young, moderately trained males performed a continuous incremental (3-min stages) exercise test to exhaustion on separate occasions on an electronically braked cycle (CYC) ergometer and an air-braked rowing (ROW) ergometer, respectively. On two further occasions, participants performed a 20-min steady-state exercise bout at ∼50%VO2peak on the respective modalities. Despite similar oxygen consumption, rates of fat oxidation (FATox ) were ∼45% higher during ROW compared with CYC (P < 0.05) across a range of power output increments. The crossover point for substrate utilization occurred at a higher relative exercise intensity for ROW than CYC (57.8 ± 2.1 vs 42.1 ± 3.6%VO2peak , P < 0.05). During steady-state submaximal exercise, the higher FATox during ROW compared with CYC was maintained (P < 0.05), but absolute FATox were 42% (CYC) and 28% (ROW) lower than during incremental exercise. FATox is higher during ROW compared with CYC exercise across a range of exercise intensities matched for energy expenditure, and is likely as a consequence of larger muscle mass recruited during ROW.

  4. CT evaluation of intracholecystic bile

    SciTech Connect

    Rebner, M.; Ruggieri, P.M.; Gross, B.H.; Glazer, G.M.

    1985-08-01

    Computed tomography (CT) has been used to detect a variety of gallbladder abnormalities, but the accuracy of routine abdominal CT in evaluating intracholecystic bile has not been established. Forty-six patients were identified in whom abdominal CT and sonography were performed within 1 week of each other. Using sonographic results as the standard, sensitivity specificity, and accuracy of CT gallbladder evaluation were calculated; both initial CT interpretations and retrospective review of scans were used for this analysis. In the retrospective review, visual interpretation of gallbladder images and measurement of intracholecystic bile attenuation were analyzed. The most common cause of high-attenuation bile in the series was sludge, a cause not previously reported. It was concluded that intracholecystic bile is poorly evaluated on routine abdominal CT, particularly because of low sensitivity in disease detection.

  5. The Passive Microwave Remote Sensing of Soil Moisture: the Effect of Tilled Row Structure

    NASA Technical Reports Server (NTRS)

    Wang, J. R.; Newton, R. W.; Rouse, J. W.

    1979-01-01

    The tilled rowstructure is known to be one of the important factors affecting the observations of the microwave emission from a natural surface. Measurements of this effect were carried out with both I and X band radiometers mounted on a mobile truck on a bare 40 m x 45 m row tilled field. The soil moisture content during the measurements ranged from approximately 10 percent to approximately 30 percent by dry weight. The results of these measurements showed that the variations of the antenna temperatures with incident angle theta changed with the azimuthal angle a measured from the row direction. A numerical calculation based on a composite surface roughness was made and found to predict the observed features within the model's limit of accuracy. It was concluded that the difference between the horizontally and vertically polarized temperatures was due to the change in the local angle of field emission within the antenna field of view caused by the large scale row structure.

  6. The influence of kayaking and rowing sports experience on postural response to optic flow.

    PubMed

    Chung, Hyun Chae

    2015-02-01

    This study investigated the postural response of kayakers and rowers to imposed optic flow. The athletes, with experience in unstable water environments, should have a specific postural response to optic flow. 12 male participants with kayaking and rowing experience and 12 with no specific sports experience were asked to stand still with and without room motion. This study varied the amplitude and frequency of room motion and evaluated the trajectory of the center of pressure. The kayaking and rowing group were less influenced by imposed optic flow, and body sway was more closely synchronized to the oscillating room compared to the Non-athlete group. These results suggest that postural adaptation occurs in association with experience in kayaking and rowing. PMID:25650510

  7. CT findings of atrial myxoma

    SciTech Connect

    Tsuchiya, F.; Kohno, A.; Saitoh, R.; Shigeta, A.

    1984-04-01

    The computed tomographic (CT) appearance of six atrial myxomas was analyzed. Five of the myxomas were located in the left atrium and one was in the right atrium. The margin of the myxoma was at least slightly lobulated in five cases and the content was inhomogeneous in all. Calcification was demonstrated in three cases. The site of attachment of the myxoma was demonstrated by CT to be the arial septum in all cases. The CT finding correlated well with the operative findings. It is concluded that it is possible with CT to diagnose atrial myxoma by the location and nature of the intracardiac mass and to differentiate it from thrombus.

  8. Chronic osteomyelitis examined by CT

    SciTech Connect

    Wing, V.W.; Jeffrey, R.B. Jr.; Federle, M.P.; Helms, C.A.; Trafton, P.

    1985-01-01

    CT examination of 25 patients who had acute exacerbations of chronic osteomyelitis allowed for the correct identification of single or multiple sequestra in 14 surgical patients. Plain radiographs were equivocal for sequestra in seven of these patients, because the sequestra were too small or because diffuse bony sclerosis was present. CT also demonstrated a foreign body and five soft tissue abscesses not suspected on the basis of plain radiographs. CT studies, which helped guide the operative approach, were also useful in treating those patients whose plain radiographs were positive for sequestra. The authors review the potential role of CT in evaluating patients with chronic osteomyelitis.

  9. Investigation of Blade-row Flow Distributions in Axial-flow-compressor Stage Consisting of Guide Vanes and Rotor-blade Row

    NASA Technical Reports Server (NTRS)

    Mahoney, John J; Dugan, Paul D; Budinger, Raymond E; Goelzer, H Fred

    1950-01-01

    A 30-inch tip-diameter axial-flow compressor stage was investigated with and without rotor to determine individual blade-row performance, interblade-row effects, and outer-wall boundary-layer conditions. Velocity gradients at guide-vane outlet without rotor approximated design assumptions, when the measured variation of leaving angle was considered. With rotor in operation, Mach number and rotor-blade effects changed flow distribution leaving guide vanes and invalidated design assumption of radial equilibrium. Rotor-blade performance correlated interpolated two-dimensional results within 2 degrees, although tip stall was indicated in experimental and not two-dimensional results. Boundary-displacement thickness was less than 1.0 and 1.5 percent of passage height after guide vanes and after rotor, respectively, but increased rapidly after rotor when tip stall occurred.

  10. Candidate perennial bioenergy grasses have a higher albedo than annual row crops

    NASA Astrophysics Data System (ADS)

    Miller, J. N.; VanLoocke, A.; Gomez-Casanovas, N.; Bernacchi, C.

    2015-12-01

    The production of perennial cellulosic feedstocks for bioenergy presents the potential to diversify regional economies and the national energy supply, while also serving as climate 'regulators' due to a number of biogeochemical and biogeophysical differences relative to row crops. Numerous observational and model based approaches have investigated biogeochemical tradeoffs, such as increased carbon sequestration and increased water use, associated with growing cellulosic feedstocks. A less understood aspect is the biogeophysical changes associated with the difference in albedo (α), which could alter the local energy balance and cause local to regional cooling several times larger than that associated with offsetting carbon. Here, we established paired fields of Miscanthus × giganteus (miscanthus) and Panicum virgatum (switchgrass), two of the leading perennial cellulosic feedstock candidates, and traditional annual row crops in the highly productive "Corn-belt". Our results show that miscanthus did and switchgrass did not have an overall higher α than current row crops but a strong seasonal pattern existed. Both perennials had consistently higher growing season α than row crops and winter α did not differ. The lack of observed differences in winter α, however, masked an interaction between snow cover and species differences, with the perennial species, compared with the row crops, having a higher α when snow was absent and a much lower α when snow was present. Overall, these changes resulted in an average net reduction in annual absorbed energy of about 5 W/m2 for switchgrass and about 8 W/m2 for miscanthus relative to annual crops. Therefore, the conversion from annual row to perennial crops alters the radiative balance of the surface via changes in α and could lead to regional cooling.

  11. Comparison of rowing on a concept 2 stationary and dynamic ergometer.

    PubMed

    Benson, Aaron; Abendroth, Julianne; King, Deborah; Swensen, Thomas

    2011-01-01

    Biomechanical and physiological responses to rowing 1000 m at a power output equivalent to a 2000 m race were compared in 34 collegiate rowers (17 women, 17 men) rowing on a stationary and dynamic Concept 2 ergometer. Stroke ratio, peak handle force, rate of force development, impulse, and respiratory exchange ratio decreased by 15.7, 14.8, 10.9, 10.2 and 1.9%, respectively, on the dynamic ergometer. In contrast, percent time to peak force and stroke rate increased by 10.5 and 12.6%, respectively, during dynamic ergometry; the changes in stroke rate and impulse were greater for men than women. Last, VO2 was 5.1% higher and efficiency 5. 3% lower on the dynamic ergometer for men. Collegiate rowers used higher stoke rates and lower peak stroke forces to achieve a similar power output while rowing at race pace on the dynamic ergometer, which may have increased the cardiopulmonary demand and possibly reduced force production in the primary movers. Differences were more pronounced in males than females; this dichotomy may be more due to dynamic ergometer familiarity than sex. Key pointsWhen rowing at a constant power output, all rowers used higher stroke rates and lower stroke forces on the Concept 2 Dynamic ergometer as compared to the Concept 2 Stationary ergometer.When rowing at a constant power output, cardiopulmonary demand was higher for all rowers, as measured by heart rate, on the Concept 2 Dynamic ergometer as compared to the Concept 2 Stationary ergometer.When rowing at a constant power output, efficiency was lower for male rowers on the Concept 2 Dynamic ergometer as compared to the Concept 2 Stationary ergometer.

  12. Modeling of human Heart Rate response during walking, cycling and rowing.

    PubMed

    Baig, Dur-E-Zehra; Su, Hao; Cheng, Teddy M; Savkin, Andrey V; Su, Steven W; Celler, Branko G

    2010-01-01

    The aim of this paper is to study the human Heart Rate (HR) response during walking, cycling and rowing exercises using linear time varying (LTV) models. We used the frequency of exercise locomotion as the input to the model. This frequency characterizes the stride rate, cadence rate and strokes rate of the walking, cycling and rowing exercises respectively. The time varying parameters in the LTV models were estimated by the Kalman Filter (KF). The results in this study demonstrate that HR responses to these exercises exhibit some degree of time varying nature.

  13. Radar Ocean Wave Spectrometer (ROWS) preprocessing program (PREROWS2.EXE). User's manual and program description

    NASA Technical Reports Server (NTRS)

    Vaughn, Charles R.

    1993-01-01

    This Technical Memorandum is a user's manual with additional program documentation for the computer program PREROWS2.EXE. PREROWS2 works with data collected by an ocean wave spectrometer that uses radar (ROWS) as an active remote sensor. The original ROWS data acquisition subsystem was replaced with a PC in 1990. PREROWS2.EXE is a compiled QuickBasic 4.5 program that unpacks the recorded data, displays various variables, and provides for copying blocks of data from the original 8mm tape to a PC file.

  14. All-Endoscopic Single-Row Repair of Full-Thickness Gluteus Medius Tears

    PubMed Central

    Levy, David M.; Bogunovic, Ljiljana; Grzybowski, Jeffrey S.; Kuhns, Benjamin D.; Bush-Joseph, Charles A.; Nho, Shane J.

    2016-01-01

    Abductor tendon tears typically develop insidiously in middle-aged women and can lead to debilitating lateral hip pain and a Trendelenburg limp. The gluteus medius tendon is most commonly torn and may show fatty degeneration over time, similar to the rotator cuff muscles of the shoulder. Endoscopic repair offers a therapeutic alternative to traditional open techniques. This article describes the workup, examination, and endoscopic repair of a full-thickness gluteus medius tear presenting as lateral hip pain and weakness. The surgical repair for this case used a single-row suture anchor technique. In addition, the indications and technique for a double-row repair will be discussed. PMID:27073767

  15. Absorbed Radiation Dose in Radiosensitive Organs Using 64- and 320-Row Multidetector Computed Tomography: A Comparative Study

    PubMed Central

    Khan, Atif N.; Nikolic, Boris; Khan, Mohammad K.; Kang, Jian; Khosa, Faisal

    2014-01-01

    Aim. To determine absorbed radiation dose (ARD) in radiosensitive organs during prospective and full phase dose modulation using ECG-gated MDCTA scanner under 64- and 320-row detector modes. Methods. Female phantom was used to measure organ radiation dose. Five DP-3 radiation detectors were used to measure ARD to lungs, breast, and thyroid using the Aquilion ONE scanner in 64- and 320-row modes using both prospective and dose modulation in full phase acquisition. Five measurements were made using three tube voltages: 100, 120, and 135 kVp at 400 mA at heart rate (HR) of 60 and 75 bpm for each protocol. Mean acquisition was recorded in milligrays (mGy). Results. Mean ARD was less for 320-row versus 64-row mode for each imaging protocol. Prospective EKG-gated imaging protocol resulted in a statistically lower ARD using 320-row versus 64-row modes for midbreast (6.728 versus 19.687 mGy, P < 0.001), lung (6.102 versus 21.841 mGy, P < 0.001), and thyroid gland (0.208 versus 0.913 mGy; P < 0.001). Retrospective imaging using 320- versus 64-row modes showed lower ARD for midbreast (10.839 versus 43.169 mGy, P < 0.001), lung (8.848 versus 47.877 mGy, P < 0.001), and thyroid gland (0.057 versus 2.091 mGy; P < 0.001). ARD reduction was observed at lower kVp and heart rate. Conclusions. Dose reduction to radiosensitive organs is achieved using 320-row compared to 64-row modes for both prospective and retrospective gating, whereas 64-row mode is equivalent to the same model 64-row MDCT scanner. PMID:25170427

  16. Comparison of standard 4-row versus 6-row 3-D linear cutter stapler in creation of gastrointestinal system anastomoses: a prospective randomized trial

    PubMed Central

    Sozutek, Alper; Colak, Tahsin; Dag, Ahmet; Olmez, Tolga

    2012-01-01

    OBJECTIVE: This prospective study was conducted to compare the clinical outcomes of a 6-row 3-D linear cutter with the standard 4-row linear cutter in patients who underwent elective gastrointestinal surgery anastomosis. METHOD: Patients who underwent elective open gastrointestinal surgery that included stapled anastomosis using a linear cutter (Proximate®, Ethicon Endo-Surgery, Cincinnati, OH) between January 2011 and May 2011 were included in the study. The patients were randomly assigned to two groups according to the linear cutter that was used in the surgery: the standard 4-row cutter (the S group) or the new 6-row cutter (the N group). The groups were compared based on the patient demographic data, the laboratory parameters, the preoperative diagnosis, the surgery performed, the operation time, intra- or postoperative complications, the time to oral tolerance and the length of the hospital stay. RESULTS: The S group included 11 male and nine female patients with a mean age of 65±12 (35-84) years, while the N group included 13 male and eight female patients with a mean age of 62±11 (46-79) years (p = 0.448, p = 0.443, respectively). Anastomotic line bleeding was observed in eight (40%) patients in the S group and in one (4.7%) patient in the N group (p = 0.006). Dehiscence of the anastomosis line was observed in two (10%) patients in the S group and none in the N group (p = 0.131). Anastomotic leakage developed in three (15%) patients in the S group and in one (4.7%) patient in the N group (p = 0.269). The mean hospital stay was 12.65±6.1 days in the S group and 9.52±2.9 days in the N group (p = 0.043). CONCLUSION: The 6-row 3-D linear cutter is a safe and easily applied instrument that can be used to create anastomoses in gastrointestinal surgery. The new stapler provides some usage benefits and is also superior to the standard linear cutter with regard to anastomotic line bleeding. PMID:23018300

  17. Role of Computer Aided Diagnosis (CAD) in the detection of pulmonary nodules on 64 row multi detector computed tomography

    PubMed Central

    Prakashini, K; Babu, Satish; Rajgopal, KV; Kokila, K Raja

    2016-01-01

    Aims and Objectives: To determine the overall performance of an existing CAD algorithm with thin-section computed tomography (CT) in the detection of pulmonary nodules and to evaluate detection sensitivity at a varying range of nodule density, size, and location. Materials and Methods: A cross-sectional prospective study was conducted on 20 patients with 322 suspected nodules who underwent diagnostic chest imaging using 64-row multi-detector CT. The examinations were evaluated on reconstructed images of 1.4 mm thickness and 0.7 mm interval. Detection of pulmonary nodules, initially by a radiologist of 2 years experience (RAD) and later by CAD lung nodule software was assessed. Then, CAD nodule candidates were accepted or rejected accordingly. Detected nodules were classified based on their size, density, and location. The performance of the RAD and CAD system was compared with the gold standard that is true nodules confirmed by consensus of senior RAD and CAD together. The overall sensitivity and false-positive (FP) rate of CAD software was calculated. Observations and Results: Of the 322 suspected nodules, 221 were classified as true nodules on the consensus of senior RAD and CAD together. Of the true nodules, the RAD detected 206 (93.2%) and 202 (91.4%) by the CAD. CAD and RAD together picked up more number of nodules than either CAD or RAD alone. Overall sensitivity for nodule detection with the CAD program was 91.4%, and FP detection per patient was 5.5%. The CAD showed comparatively higher sensitivity for nodules of size 4–10 mm (93.4%) and nodules in hilar (100%) and central (96.5%) location when compared to RAD's performance. Conclusion: CAD performance was high in detecting pulmonary nodules including the small size and low-density nodules. CAD even with relatively high FP rate, assists and improves RAD's performance as a second reader, especially for nodules located in the central and hilar region and for small nodules by saving RADs time. PMID:27578931

  18. A Descriptive Study of the Skid Row Alcoholic in Houston, Texas. Criminal Justice Monograph, Volume II, No. 2.

    ERIC Educational Resources Information Center

    Ross, Tommy W.

    The purpose of this study was to establish a population profile of the skid row alcoholic in Houston, Texas and also to compare his demographic and drinking patterns with those of similar groups described in earlier studies made in other cities. Primary data sources for the study were interviews with 100 skid row alcoholics and with police and…

  19. 78 FR 25572 - Special Local Regulation; Wy-Hi Rowing Regatta, Trenton Channel; Detroit River, Wyandotte, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-02

    ... Security FR Federal Register NPRM Notice of Proposed Rulemaking A. Regulatory History and Information The... SECURITY Coast Guard 33 CFR Part 100 RIN 1625-AA08 Special Local Regulation; Wy-Hi Rowing Regatta, Trenton... navigable waters immediately prior to, during, and immediately after the Wy-Hi Rowing Regatta. This...

  20. Considerations for site-specific implementation of active downforce and seeding depth technologies on row-crop planters

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Planter technology continues to rapidly advance including row-by-row control of parameters such as applied downforce and seeding depth that permit real-time adjustment to varying field conditions. The objective of this research was to investigate the relationship of seeding depth and applied downfo...

  1. 30 CFR 285.308 - How will MMS conduct an auction for ROW grants and RUE grants?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... and RUE grants? 285.308 Section 285.308 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... Renewable Energy Activities Obtaining Row Grants and Rue Grants § 285.308 How will MMS conduct an auction for ROW grants and RUE grants? (a) If MMS determines that there is competitive interest, we will:...

  2. 30 CFR 285.501 - What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant? 285.501 Section 285.501 Mineral Resources BUREAU OF OCEAN ENERGY... Payments § 285.501 What deposits must I submit for a competitively issued lease, ROW grant, or RUE...

  3. 30 CFR 585.501 - What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 2 2014-07-01 2014-07-01 false What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant? 585.501 Section 585.501 Mineral Resources BUREAU OF OCEAN ENERGY... deposits must I submit for a competitively issued lease, ROW grant, or RUE grant? (a) For a...

  4. 30 CFR 585.501 - What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 2 2012-07-01 2012-07-01 false What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant? 585.501 Section 585.501 Mineral Resources BUREAU OF OCEAN ENERGY... deposits must I submit for a competitively issued lease, ROW grant, or RUE grant? (a) For a...

  5. 30 CFR 585.501 - What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 2 2013-07-01 2013-07-01 false What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant? 585.501 Section 585.501 Mineral Resources BUREAU OF OCEAN ENERGY... deposits must I submit for a competitively issued lease, ROW grant, or RUE grant? (a) For a...

  6. 30 CFR 285.501 - What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What deposits must I submit for a competitively issued lease, ROW grant, or RUE grant? 285.501 Section 285.501 Mineral Resources MINERALS MANAGEMENT... must I submit for a competitively issued lease, ROW grant, or RUE grant? (a) For a competitive lease...

  7. Patterns of comb row development in young and adult stages of the ctenophores Mnemiopsis leidyi and Pleurobrachia pileus.

    PubMed

    Tamm, Sidney L

    2012-09-01

    The development of comb rows in larval and adult Mnemiopsis leidyi and adult Pleurobrachia pileus is compared to regeneration of comb plates in these ctenophores. Late gastrula embryos and recently hatched cydippid larvae of Mnemiopsis have five comb plates in subsagittal rows and six comb plates in subtentacular rows. Subsagittal rows develop a new (sixth) comb plate and both types of rows add plates at similar rates until larvae reach the transition to the lobate form at ∼5 mm size. New plate formation then accelerates in subsagittal rows that later extend on the growing oral lobes to become twice the length of subtentacular rows. Interplate ciliated grooves (ICGs) develop in an aboral-oral direction along comb rows, but ICG formation itself proceeds from oral to aboral between plates. New comb plates in Mnemiopsis larvae are added at both aboral and oral ends of rows. At aboral ends, new plates arise as during regeneration: local widening of a ciliated groove followed by formation of a short split plate that grows longer and wider and joins into a common plate. At oral ends, new plates arise as a single tuft of cilia before an ICG appears. Adult Mnemiopsis continue to make new plates at both ends of rows. The frequency of new aboral plate formation varies in the eight rows of an animal and seems unrelated to body size. In Pleurobrachia that lack ICGs, new comb plates at aboral ends arise between the first and second plates as a single small nonsplit plate, located either on the row midline or off-axis toward the subtentacular plane. As the new (now second) plate grows larger, its distance from the first and third plates increases. Size of the new second plate varies within the eight rows of the same animal, indicating asynchronous formation of plates as in Mnemiopsis. New oral plates arise as in Mnemiopsis. The different modes of comb plate formation in Mnemiopsis versus Pleurobrachia are accounted for by differences in mesogleal firmness and mechanisms of

  8. Thoracic textilomas: CT findings*

    PubMed Central

    Machado, Dianne Melo; Zanetti, Gláucia; Araujo, Cesar Augusto; Nobre, Luiz Felipe; Meirelles, Gustavo de Souza Portes; Pereira e Silva, Jorge Luiz; Guimarães, Marcos Duarte; Escuissato, Dante Luiz; Souza, Arthur Soares; Hochhegger, Bruno; Marchiori, Edson

    2014-01-01

    OBJECTIVE: The aim of this study was to analyze chest CT scans of patients with thoracic textiloma. METHODS: This was a retrospective study of 16 patients (11 men and 5 women) with surgically confirmed thoracic textiloma. The chest CT scans of those patients were evaluated by two independent observers, and discordant results were resolved by consensus. RESULTS: The majority (62.5%) of the textilomas were caused by previous heart surgery. The most common symptoms were chest pain (in 68.75%) and cough (in 56.25%). In all cases, the main tomographic finding was a mass with regular contours and borders that were well-defined or partially defined. Half of the textilomas occurred in the right hemithorax and half occurred in the left. The majority (56.25%) were located in the lower third of the lung. The diameter of the mass was ≤ 10 cm in 10 cases (62.5%) and > 10 cm in the remaining 6 cases (37.5%). Most (81.25%) of the textilomas were heterogeneous in density, with signs of calcification, gas, radiopaque marker, or sponge-like material. Peripheral expansion of the mass was observed in 12 (92.3%) of the 13 patients in whom a contrast agent was used. Intraoperatively, pleural involvement was observed in 14 cases (87.5%) and pericardial involvement was observed in 2 (12.5%). CONCLUSIONS: It is important to recognize the main tomographic aspects of thoracic textilomas in order to include this possibility in the differential diagnosis of chest pain and cough in patients with a history of heart or thoracic surgery, thus promoting the early identification and treatment of this postoperative complication. PMID:25410842

  9. Re: Penetration Behavior of Opposed Rows of Staggered Secondary Air Jets Depending on Jet Penetration Coefficient and Momentum Flux Ratio

    NASA Technical Reports Server (NTRS)

    Holdeman, James D.

    2016-01-01

    The purpose of this article is to explain why the extension of the previously published C = (S/Ho)sqrt(J) scaling for opposed rows of staggered jets wasn't directly successful in the study by Choi et al. (2016). It is not surprising that staggered jets from opposite sides do not pass each other at the expected C value, because Ho/D and sqrt(J) are much larger than the maximum in previous studies. These, and large x/D's, tend to suggest development of 2-dimensional flow. Although there are distinct optima for opposed rows of in-line jets, single-side injection, and opposed rows of staggered jets based on C, opposed rows of staggered jets provide as good or better mixing performance, at any C value, than opposed rows of in-line jets or jets from single-side injection.

  10. Effects of acoustic feedback training in elite-standard Para-Rowing.

    PubMed

    Schaffert, Nina; Mattes, Klaus

    2015-01-01

    Assessment and feedback devices have been regularly used in technique training in high-performance sports. Biomechanical analysis is mainly visually based and so can exclude athletes with visual impairments. The aim of this study was to examine the effects of auditory feedback on mean boat speed during on-water training of visually impaired athletes. The German National Para-Rowing team (six athletes, mean ± s, age 34.8 ± 10.6 years, body mass 76.5 ± 13.5 kg, stature 179.3 ± 8.6 cm) participated in the study. Kinematics included boat acceleration and distance travelled, collected with Sofirow at two intensities of training. The boat acceleration-time traces were converted online into acoustic feedback and presented via speakers during rowing (sections with and without alternately). Repeated-measures within-participant factorial ANOVA showed greater boat speed with acoustic feedback than baseline (0.08 ± 0.01 m·s(-1)). The time structure of rowing cycles was improved (extended time of positive acceleration). Questioning of athletes showed acoustic feedback to be a supportive training aid as it provided important functional information about the boat motion independent of vision. It gave access for visually impaired athletes to biomechanical analysis via auditory information. The concept for adaptive athletes has been successfully integrated into the preparation for the Para-Rowing World Championships and Paralympics.

  11. Convergent validity of a novel method for quantifying rowing training loads.

    PubMed

    Tran, Jacqueline; Rice, Anthony J; Main, Luana C; Gastin, Paul B

    2015-01-01

    Elite rowers complete rowing-specific and non-specific training, incorporating continuous and interval-like efforts spanning the intensity spectrum. However, established training load measures are unsuitable for use in some modes and intensities. Consequently, a new measure known as the T2minute method was created. The method quantifies load as the time spent in a range of training zones (time-in-zone), multiplied by intensity- and mode-specific weighting factors that scale the relative stress of different intensities and modes to the demands of on-water rowing. The purpose of this study was to examine the convergent validity of the T2minute method with Banister's training impulse (TRIMP), Lucia's TRIMP and Session-RPE when quantifying elite rowing training. Fourteen elite rowers (12 males, 2 females) were monitored during four weeks of routine training. Unadjusted T2minute loads (using coaches' estimates of time-in-zone) demonstrated moderate-to-strong correlations with Banister's TRIMP, Lucia's TRIMP and Session-RPE (rho: 0.58, 0.55 and 0.42, respectively). Adjusting T2minute loads by using actual time-in-zone data resulted in stronger correlations between the T2minute method and Banister's TRIMP and Lucia's TRIMP (rho: 0.85 and 0.81, respectively). The T2minute method is an appropriate in-field measure of elite rowing training loads, particularly when actual time-in-zone values are used to quantify load.

  12. A Historical Analysis of Library Access for Death Row Inmates in Ohio.

    ERIC Educational Resources Information Center

    Ostrolenk, Lisa

    A historical study was conducted to determine what type of access to the prison legal library is received by prisoners now housed on death row at the Mansfield Correctional Institution (MaCI) (Mansfield, Ohio) that were formerly housed at the Southern Ohio Correctional Facility (SOCF) (Lucasville, Ohio). A satellite law library had been created…

  13. Concentrated Animal Feeding Operations, Row Crops and their Relationship to Nitrate in Eastern Iowa Rivers

    PubMed Central

    Weldon, Mark B.; Hornbuckle, Keri C.

    2009-01-01

    Concentrated animal feeding operations (CAFO) and fertilizer application to row crops may contribute to poor water quality in surface waters. To test this hypothesis, we evaluated nutrient concentrations and fluxes in four Eastern Iowa watersheds sampled between 1996-2004. We found that these watersheds contribute nearly 10% of annual nitrate flux entering the Gulf of Mexico, while representing only 1.5% of the contributing drainage basin. Mass budget analysis shows stream flow to be a major loss of nitrogen (18% of total N output), second only to crop harvest (63%). The major watershed inputs of nitrogen include applied fertilizer for corn (54% of total N input) and nitrogen fixation by soybeans (26%). Despite the relatively small input from animal manure (~5%), the results of spatial analysis indicate that row crop and CAFO densities are significantly and independently correlated to higher nitrate concentration in streams. Pearson correlation coefficients of 0.59 and 0.89 were found between nitrate concentration and row crop and CAFO density, respectively. Multiple linear regression analysis produced a correlation for nitrate concentration with an R2 value of 85%. High spatial density of row crops and CAFOs are linked to the highest river nitrate concentrations (up to 15 mg/l normalized over five years). PMID:16749677

  14. Accuracy and feasibility of optoelectronic sensors for weed mapping in wide row crops.

    PubMed

    Andújar, Dionisio; Ribeiro, Ángela; Fernández-Quintanilla, César; Dorado, José

    2011-01-01

    The main objectives of this study were to assess the accuracy of a ground-based weed mapping system that included optoelectronic sensors for weed detection, and to determine the sampling resolution required for accurate weed maps in maize crops. The optoelectronic sensors were located in the inter-row area of maize to distinguish weeds against soil background. The system was evaluated in three maize fields in the early spring. System verification was performed with highly reliable data from digital images obtained in a regular 12 m × 12 m grid throughout the three fields. The comparison in all these sample points showed a good relationship (83% agreement on average) between the data of weed presence/absence obtained from the optoelectronic mapping system and the values derived from image processing software ("ground truth"). Regarding the optimization of sampling resolution, the comparison between the detailed maps (all crop rows with sensors separated 0.75 m) with maps obtained with various simulated distances between sensors (from 1.5 m to 6.0 m) indicated that a 4.5 m distance (equivalent to one in six crop rows) would be acceptable to construct accurate weed maps. This spatial resolution makes the system cheap and robust enough to generate maps of inter-row weeds.

  15. Methodology for Obtaining a Representative Sample of Homeless Persons: The Los Angeles Skid Row Study.

    ERIC Educational Resources Information Center

    Burnam, M. Audrey; Koegel, Paul

    1988-01-01

    Drawing a probability sample of homeless adults in Los Angeles' Skid Row resulted in a sampling design meeting statistical criteria. The design uses data from meal centers, bed counts, and outdoor congregations; and allows unbiased estimates of prevalence of mental disorders and assessment of service needs of the homeless. (TJH)

  16. Some Half-Row Sums from Pascal's Triangle via Laplace Transforms

    ERIC Educational Resources Information Center

    Dence, Thomas P.

    2007-01-01

    This article presents some identities on the sum of the entries in the first half of a row in Pascal's triangle. The results were discovered while the author was working on a problem involving Laplace transforms, which are used in proving of the identities.

  17. Soil heat flux calculation for sunlit and shaded surfaces under row crops: 2. Model Test

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A method to calculate surface soil heat flux (G0) as a function of net radiation to the soil (RN,S) was developed that accounts for positional variability across a row crop interrow. The method divides the interrow into separate sections, which may be shaded, partially sunlit, or fully sunlit, and c...

  18. Stagnation region gas film cooling: Spanwise angled injection from multiple rows of holes. [gas turbine engines

    NASA Technical Reports Server (NTRS)

    Luckey, D. W.; Lecuyer, M. R.

    1981-01-01

    The stagnation region of a cylinder in a cross flow was used in experiments conducted with both a single row and multiple rows of spanwise angled (25 deg) coolant holes for a range of the coolant blowing ratio with a freestream to wall temperature ratio approximately equal to 1.7 and R(eD) = 90,000. Data from local heat flux measurements are presented for injection from a single row located at 5 deg, 22.9 deg, 40.8 deg, 58.7 deg from stagnation using a hole spacing ratio of S/d(o) = 5 and 10. Three multiple row configurations were also investigated. Data are presented for a uniform blowing distribution and for a nonuniform blowing distribution simulating a plenum supply. The data for local Stanton Number reduction demonstrated a lack of lateral spreading by the coolant jets. Heat flux levels larger than those without film cooling were observed directly behind the coolant holes as the blowing ratio exceeded a particular value. The data were spanwise averaged to illustrate the influence of injection location, blowing ratio and hole spacing. The large values of blowing ratio for the blowing distribution simulating a plenum supply resulted in heat flux levels behind the holes in excess of the values without film cooling. An increase in freestream turbulence intensity from 4.4 to 9.5 percent had a negligible effect on the film cooling performance.

  19. Injury severity data for front and second row passengers in frontal crashes

    PubMed Central

    Atkinson, Theresa; Leszek Gawarecki; Tavakoli, Massoud

    2016-01-01

    The data contained here were obtained from the National Highway Transportation Safety Administration׳s National Automotive Sampling System – Crashworthiness Data System (NASS-CDS) for the years 2008–2014. This publically available data set monitors motor vehicle crashes in the United States, using a stratified random sample frame, resulting in information on approximately 5000 crashes each year that can be utilized to create national estimates for crashes. The NASS-CDS data sets document vehicle, crash, and occupant factors. These data can be utilized to examine public health, law enforcement, roadway planning, and vehicle design issues. The data provided in this brief are a subset of crash events and occupants. The crashes provided are exclusively frontal crashes. Within these crashes, only restrained occupants who were seated in the right front seat position or the second row outboard seat positions were included. The front row and second row data sets were utilized to construct occupant pairs crashes where both a right front seat occupant and a second row occupant were available. Both unpaired and paired data sets are provided in this brief. PMID:27077084

  20. Wide row spacing for deep-furrow planting of winter wheat

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A winter wheat, summer fallow rotation is practiced on 1.56 million cropland hectares in the low-precipitation (<300 mm annual) region of the Inland Pacific Northwest of the United States (PNW). Farmers use deep-furrow drills with rows spaced 40- to 45-cm apart to plant as deep as 20 cm to reach moi...

  1. All Three Rows of Outer Hair Cells Are Required for Cochlear Amplification.

    PubMed

    Murakoshi, Michio; Suzuki, Sho; Wada, Hiroshi

    2015-01-01

    In the mammalian auditory system, the three rows of outer hair cells (OHCs) located in the cochlea are thought to increase the displacement amplitude of the organ of Corti. This cochlear amplification is thought to contribute to the high sensitivity, wide dynamic range, and sharp frequency selectivity of the hearing system. Recent studies have shown that traumatic stimuli, such as noise exposure and ototoxic acid, cause functional loss of OHCs in one, two, or all three rows. However, the degree of decrease in cochlear amplification caused by such functional losses remains unclear. In the present study, a finite element model of a cross section of the gerbil cochlea was constructed. Then, to determine effects of the functional losses of OHCs on the cochlear amplification, changes in the displacement amplitude of the basilar membrane (BM) due to the functional losses of OHCs were calculated. Results showed that the displacement amplitude of the BM decreases significantly when a single row of OHCs lost its function, suggesting that all three rows of OHCs are required for cochlear amplification. PMID:26295049

  2. Concentrated animal feeding operations, row crops, and their relationship to nitrate in eastern Iowa Rivers.

    PubMed

    Weldon, Mark B; Hornbuckle, Keri C

    2006-05-15

    Concentrated animal feeding operations (CAFO) and fertilizer application to row crops may contribute to poor water quality in surface waters. To test this hypothesis, we evaluated nutrient concentrations and fluxes in four Eastern Iowa watersheds sampled between 1996 and 2004. We found that these watersheds contribute nearly 10% of annual nitrate flux entering the Gulf of Mexico, while representing only 1.5% of the contributing drainage basin. Mass budget analysis shows streamflow to be a major loss of nitrogen (18% of total N output), second only to crop harvest (63%). The major watershed inputs of nitrogen include applied fertilizer for corn (54% of total N input) and nitrogen fixation by soybeans (26%). Despite the relatively small input from animal manure (approximately 5%), the results of spatial analysis indicate that row crop and CAFO densities are significantly and independently correlated to higher nitrate concentration in streams. Pearson correlation coefficients of 0.59 and 0.89 were found between nitrate concentration and row crop and CAFO density, respectively. Multiple linear regression analysis produced a correlation for nitrate concentration with an R2 value of 85%. High spatial density of row crops and CAFOs are linked to the highest river nitrate concentrations (up to 15 mg/L normalized over five years). PMID:16749677

  3. The Blue Glow from the Back Row: Live Theater and the Wireless Teen

    ERIC Educational Resources Information Center

    Richardson, John M.

    2012-01-01

    Every year the author and his colleagues take their grade 12 English students to see four plays at one of Canada's major theaters. Chatting about the series on the last day of class, his students asked him if he had seen "the blue glow from the back row." Laughing at his bewilderment, they told him that during the performances so many students…

  4. Accuracy and Feasibility of Optoelectronic Sensors for Weed Mapping in Wide Row Crops

    PubMed Central

    Andújar, Dionisio; Ribeiro, Ángela; Fernández-Quintanilla, César; Dorado, José

    2011-01-01

    The main objectives of this study were to assess the accuracy of a ground-based weed mapping system that included optoelectronic sensors for weed detection, and to determine the sampling resolution required for accurate weed maps in maize crops. The optoelectronic sensors were located in the inter-row area of maize to distinguish weeds against soil background. The system was evaluated in three maize fields in the early spring. System verification was performed with highly reliable data from digital images obtained in a regular 12 m × 12 m grid throughout the three fields. The comparison in all these sample points showed a good relationship (83% agreement on average) between the data of weed presence/absence obtained from the optoelectronic mapping system and the values derived from image processing software (“ground truth”). Regarding the optimization of sampling resolution, the comparison between the detailed maps (all crop rows with sensors separated 0.75 m) with maps obtained with various simulated distances between sensors (from 1.5 m to 6.0 m) indicated that a 4.5 m distance (equivalent to one in six crop rows) would be acceptable to construct accurate weed maps. This spatial resolution makes the system cheap and robust enough to generate maps of inter-row weeds. PMID:22163740

  5. Registration of ‘Lyon’, a two-row, spring feed barley

    Technology Transfer Automated Retrieval System (TEKTRAN)

    ‘Lyon’ (Reg. No. CV-356, PI 673045), a spring, two-row, hulled feed barley (Hordeum vulgare L.) cultivar developed and tested as 05WA-316.K, was released in 2013 by Washington State University (WSU). Lyon was derived from the cross ‘Baronesse’/‘Spaulding’ and selected through single-seed descent fro...

  6. Candidate perennial bioenergy grasses have a higher albedo than annual row crops in the Midwestern US

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The production of perennial cellulosic feedstocks for bioenergy presents the potential to diversify regional economies and the national energy supply, while also serving as climate ‘regulators’ due to a number of biogeochemical and biogeophysical differences relative to row crops. Numerous observati...

  7. Pathways to Death Row for America's Disabled Youth: Three Case Studies Driving Reform

    ERIC Educational Resources Information Center

    Schroeder, Julie; Guin, Cecile C.; Chaisson, Rebecca; Houchins, David

    2004-01-01

    This article uses the case study method to examine the lives of three youths with disabilities living in the southern part of the United States who have followed a pathway to death row. An empirically established developmental and theoretical framework is used to examine issues related to the influence of disabilities and race on children and…

  8. Anthropometric determinants of rowing ergometer performance in physically inactive collegiate females.

    PubMed

    Podstawski, R; Choszcz, Dj; Konopka, S; Klimczak, J; Starczewski, M

    2014-12-01

    The aim of the study was to evaluate anthropometric characteristics as determinants of 500 m rowing ergometer performance in physically inactive collegiate females. In this cross-sectional study, which included 196 collegiate females aged 19-23 years not participating in regular physical activities, body mass (BM), body height (BH), length of upper limbs (LA), length of lower limbs (LL), body mass index (BMI), slenderness index (SI), and the Choszcz-Podstawski index (CPI) were measured and a stepwise multiple regression analysis was performed. Participants performed 500 m maximal effort on a Concept II rowing ergometer. BM, BH, LA, LL, and the BMI, SI and CPI indices were found to be statistically significant determinants of 500 m performance. The best results (T) were achieved by females whose BH ranged from 170 to 180 cm, with LA and LL ranging from 75 to 80 cm and 85 to 90 cm, respectively. The best fitting statistical model was identified as: T = 11.6793 LR - 0.1130 LR (2) - 0.0589 LN (2) + 29.2157 CPI(2) + 0.1370 LR·LN - 2.6926 LR·CPI - 211.7796. This study supports a need for additional studies focusing on understanding the importance of anthropometric differences in rowing ergometer performance, which could lead to establishing a better quality reference for evaluation of cardiorespiratory fitness tested using a rowing ergometer in collegiate females. PMID:25609890

  9. Effects of acoustic feedback training in elite-standard Para-Rowing.

    PubMed

    Schaffert, Nina; Mattes, Klaus

    2015-01-01

    Assessment and feedback devices have been regularly used in technique training in high-performance sports. Biomechanical analysis is mainly visually based and so can exclude athletes with visual impairments. The aim of this study was to examine the effects of auditory feedback on mean boat speed during on-water training of visually impaired athletes. The German National Para-Rowing team (six athletes, mean ± s, age 34.8 ± 10.6 years, body mass 76.5 ± 13.5 kg, stature 179.3 ± 8.6 cm) participated in the study. Kinematics included boat acceleration and distance travelled, collected with Sofirow at two intensities of training. The boat acceleration-time traces were converted online into acoustic feedback and presented via speakers during rowing (sections with and without alternately). Repeated-measures within-participant factorial ANOVA showed greater boat speed with acoustic feedback than baseline (0.08 ± 0.01 m·s(-1)). The time structure of rowing cycles was improved (extended time of positive acceleration). Questioning of athletes showed acoustic feedback to be a supportive training aid as it provided important functional information about the boat motion independent of vision. It gave access for visually impaired athletes to biomechanical analysis via auditory information. The concept for adaptive athletes has been successfully integrated into the preparation for the Para-Rowing World Championships and Paralympics. PMID:25105858

  10. Convergent validity of a novel method for quantifying rowing training loads.

    PubMed

    Tran, Jacqueline; Rice, Anthony J; Main, Luana C; Gastin, Paul B

    2015-01-01

    Elite rowers complete rowing-specific and non-specific training, incorporating continuous and interval-like efforts spanning the intensity spectrum. However, established training load measures are unsuitable for use in some modes and intensities. Consequently, a new measure known as the T2minute method was created. The method quantifies load as the time spent in a range of training zones (time-in-zone), multiplied by intensity- and mode-specific weighting factors that scale the relative stress of different intensities and modes to the demands of on-water rowing. The purpose of this study was to examine the convergent validity of the T2minute method with Banister's training impulse (TRIMP), Lucia's TRIMP and Session-RPE when quantifying elite rowing training. Fourteen elite rowers (12 males, 2 females) were monitored during four weeks of routine training. Unadjusted T2minute loads (using coaches' estimates of time-in-zone) demonstrated moderate-to-strong correlations with Banister's TRIMP, Lucia's TRIMP and Session-RPE (rho: 0.58, 0.55 and 0.42, respectively). Adjusting T2minute loads by using actual time-in-zone data resulted in stronger correlations between the T2minute method and Banister's TRIMP and Lucia's TRIMP (rho: 0.85 and 0.81, respectively). The T2minute method is an appropriate in-field measure of elite rowing training loads, particularly when actual time-in-zone values are used to quantify load. PMID:25083912

  11. ANTHROPOMETRIC DETERMINANTS OF ROWING ERGOMETER PERFORMANCE IN PHYSICALLY INACTIVE COLLEGIATE FEMALES

    PubMed Central

    Choszcz, DJ; Konopka, S; Klimczak, J; Starczewski, M

    2014-01-01

    The aim of the study was to evaluate anthropometric characteristics as determinants of 500 m rowing ergometer performance in physically inactive collegiate females. In this cross-sectional study, which included 196 collegiate females aged 19-23 years not participating in regular physical activities, body mass (BM), body height (BH), length of upper limbs (LA), length of lower limbs (LL), body mass index (BMI), slenderness index (SI), and the Choszcz-Podstawski index (CPI) were measured and a stepwise multiple regression analysis was performed. Participants performed 500 m maximal effort on a Concept II rowing ergometer. BM, BH, LA, LL, and the BMI, SI and CPI indices were found to be statistically significant determinants of 500 m performance. The best results (T) were achieved by females whose BH ranged from 170 to 180 cm, with LA and LL ranging from 75 to 80 cm and 85 to 90 cm, respectively. The best fitting statistical model was identified as: T = 11.6793 LR – 0.1130 LR2 – 0.0589 LN2 + 29.2157 CPI2 + 0.1370 LR·LN - 2.6926 LR·CPI – 211.7796. This study supports a need for additional studies focusing on understanding the importance of anthropometric differences in rowing ergometer performance, which could lead to establishing a better quality reference for evaluation of cardiorespiratory fitness tested using a rowing ergometer in collegiate females. PMID:25609890

  12. An analysis of spectral discrimination between corn and soybeans using a row crop reflectance model

    NASA Technical Reports Server (NTRS)

    Suits, G. H.

    1983-01-01

    Reflectance calculations of soybeans and corn crops at two times during the growing season indicate that the high sensitivity of the thematic mapper mid-infrared band to exposed bare soil between soybean rows is most likely responsible for early season spectral discrimination of corn and soybean crops by this band.

  13. An analysis of spectral discrimination between corn and soybeans using a row crop reflectance model

    NASA Technical Reports Server (NTRS)

    Suits, G. H.

    1985-01-01

    Reflectance calculations of soybeans and corn crops at two times during the growing season indicate that the high sensitivity of the thematic mapper mid-infrared band to exposed bare soil between soybean rows is most likely responsible for early season spectral discrimination of corn and soybean crops by this band.

  14. Row width influences wheat yield, but has little effect on wheat quality

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Growers are interested in wide-row wheat production due to reductions in equipment inventory (lack of grain drill) and to allow intercropping of soybean into wheat. A trial was established during the 2012-2013 and 2013-2014 growing seasons in Wayne County and Wood County, Ohio to evaluate the effec...

  15. Effects of Frustration on the Response Rate of Skid Row Alcoholics on a Performance Task

    ERIC Educational Resources Information Center

    Scorzelli, James F.; Reinke-Scorzelli, Mary

    1976-01-01

    Determines the changes that may occur in the response rates of 14 skid row alcoholics on a performance task after the introduction of a frustration operation. Results suggest a possible relationship between low frustration tolerance and the method by which these individuals tend to motivate themselves. (Author)

  16. The Aging Men of Skid Row: A Target for Research and Service Intervention.

    ERIC Educational Resources Information Center

    Cohen, Carl I.

    Despite the recent increase in interest about the homeless population, the last large-scale systematic studies of the older skid row man were completed more than two decades ago. A more sophisticated and comprehensive instrument for measuring the physical health, mental health, social needs, and social interaction of this aging heterogeneous…

  17. Role of missing rows in the adsorption of Te on Si(001)

    NASA Astrophysics Data System (ADS)

    Takeuchi, Noboru

    1999-08-01

    We have studied the atomic structure of up to one monolayer of Te on Si(001) using first-principles total-energy calculations. A low amount of Te atoms deposited on Si(001) is adsorbed on top of symmetric Si dimers. This configuration is preferred to adsorption on cave sites between Si dimers. For the one-monolayer coverage the most favorable structure corresponds to adsorption of Te atoms on near bridge sites. The (1×1) symmetry is broken by a small shift of Te atoms from perfect bridge positions, giving rise to a slightly disordered surface. This is a way to relieve the strain due to the size difference between Te and Si atoms. Missing Te rows is another way, and it is the one observed experimentally. We have calculated the atomic structure of the surface when one out of every five Te rows is missing. Two possibilities were examined. The most favorable corresponds to missing Te rows orthogonal to original Si rows. In all cases, our results are in good agreement with experimental data.

  18. Some Effects of Row, Diagonal, and Column Screen Formats on Search Time and Strategy.

    ERIC Educational Resources Information Center

    Emurian, Henry H.; Seborg, Brian H.

    1990-01-01

    Describes a study of undergraduates that examined differences in computer screen formats and their effects on search time and strategy. Row, diagonal, and column information formats are compared, as well as tightly packed and loosely packed displays, and results of regression and residual analyses are discussed. (38 references) (LRW)

  19. Radio/antenna mounting system for wireless networking under row-crop agriculture conditions

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Interest in and deployment of wireless monitoring systems is increasing in many diverse environments, including row-crop agricultural fields. While many studies have been undertaken to evaluate various aspects of wireless monitoring and networking, such as electronic hardware components, data-colle...

  20. Coronary Events and Anatomy After Arterial Switch Operation for Transposition of the Great Arteries: Detection by 16-Row Multislice Computed Tomography Angiography in Pediatric Patients

    SciTech Connect

    Oztunc, Funda Baris, Safa; Adaletli, Ibrahim Onol, Nurper Onder Olgun, Deniz Cebi; Guezeltas, Alper Ozyilmaz, Isa Ozdil, Mine; Kurugoglu, Sebuh; Eroglu, Ayse Gueler

    2009-03-15

    The purpose of this study was to evaluate the feasibility of multislice computed tomographic (MSCT) angiography as a noninvasive method for detecting ostial, proximal, and middle segment coronary stenosis or occlusion and anatomy in patients with transposition of the great arteries who had undergone arterial switch operation (ASO). Sixteen-detector-row MSCT angiography was performed in 16 patients treated with ASO for transposition of the great arteries. The median age was 10.3 years (range, 6.2-16.3 years). Sixteen-detector-row MSCT angiography was performed in 16 patients who had undergone ASO. CT imaging was performed in the craniocaudal direction from 2 cm above the carina up to the heart basis. Noninvasive assessment of coronary artery stenosis and anatomy were investigated by MSCT angiography. Two patients were excluded from the study because of artifacts. Of 14 evaluated patients, 1 patient had ostial stenosis (7.1%). A coronary artery anatomy variant was present in six patients: left main artery (LMA) and right coronary artery (RCA) originating from the right sinus as a single orifice (n = 2); left circumflex artery (LCX) originating from the RCA (n = 1); LMA and RCA, after branching to the LCX, originating separately from the right sinus (n = 1); and LMA (n = 1) and left anterior descending artery (LADA; n = 1) originating directly from the right sinus. Intramural bridging in the LAD (n = 2) was detected. Five patients were normal. In conclusion, MSCT angiography, as a noninvasive, feasible technique for assessing coronary stenosis or occlusion and anatomy, can be used in the follow-up of patients who have undergone ASO.

  1. Multidetector-row computed tomography in the planning of abdominal perforator flaps.

    PubMed

    Masia, J; Clavero, J A; Larrañaga, J R; Alomar, X; Pons, G; Serret, P

    2006-01-01

    An accurate preoperative evaluation of the vascular anatomy of the abdominal wall is extremely valuable in improving the surgical strategy in abdominal perforator flaps. The multidetector-row computer tomography offers thin slice coverage of extended volumes with an extremely high spatial resolution. From October 2003 to December 2004, 66 female patients had breast reconstruction surgery in our department using the deep inferior epigastric artery perforator flap. Our multidetector-row computer tomography studies were performed using a 16-detector-row computer tomography scanner. The image assessment was carried out using the following protocol: we first identified the best three perforators from each side of the abdomen. Then we conducted a three-dimensional reconstruction of the abdomen by identifying exactly where the three best perforators emerged from the rectus abdominis fascia. We then transferred the data obtained from the image to the patient using a coordinate system. In addition, we also placed the dominant perforators in the patient by using a conventional hand-held Doppler. During the operation we compared intra-operative findings, Doppler results and computer tomography outcomes. Neither false positive nor false negative results were found in the computer tomography outcome. Multidetector-row computer tomography provides us with an easy method of interpreting the virtual anatomic dissection in three dimensions. It has high sensitivity and specificity and provides a good quality evaluation of the perforator vessels. This information allows reduction of operating time and safer performance of surgery. The multidetector-row computer tomography is a highly effective tool in the preoperative study of abdominal perforator flaps. PMID:16716952

  2. Anthropometric and metabolic determinants of 6,000-m rowing ergometer performance in internationally competitive rowers.

    PubMed

    Mikulic, Pavle

    2009-09-01

    The aim of this study was to examine the anthropometric and metabolic determinants of performance during 6,000-m of rowing on an ergometer. The sample comprised 25 internationally successful male heavyweight rowers (mean +/- SD: age 22.2 +/- 4.8 years, rowing experience 8.8 +/- 4.6 years, stature 1.91 +/- 0.05 m, body mass 91.7 +/- 5.9 kg, maximal oxygen uptake 5.53 +/- 0.30 L x min(-1)). The rowers completed an incremental maximal exercise test on a rowing ergometer and, within 2 weeks of this test, also completed a 6,000-m rowing ergometer time trial (mean +/- SD: 1195.4 +/- 36.1 seconds). The strongest correlates (r > 0.5, p < 0.05) with performance were lean body mass (r = -0.767), power output at ventilatory threshold (r = -0.743), power output at maximal oxygen uptake (r = -0.732), body mass (r = -0.693), chest girth (r = -0.598), relaxed arm girth (r = -0.574), forced vital capacity (r = -0.519), and arm span (r = -0.505). Stepwise multiple linear regression procedures indicated that the model comprising a combination of anthropometric and metabolic variables is the best predictor of performance (adjusted R2 = 0.722), followed by models comprising anthropometric (adjusted R2 = 0.575) and metabolic (adjusted R2 = 0.530) variables alone. The results suggest that 6,000-m ergometer performance is determined mainly by power output at ventilatory threshold (58.7% of explained variance). Based on the obtained correlations and regression models, it can be concluded that rowers competing over a 6,000 m distance on a rowing ergometer should devote their training time to the improvement of lean body mass and to the improvement of power output corresponding to ventilatory threshold.

  3. An analysis of the pacing strategy adopted by elite competitors in 2000 m rowing

    PubMed Central

    Garland, S

    2005-01-01

    Objectives: To determine the pacing strategies adopted by elite rowers in championship 2000 m races. Methods: Split times were obtained for each boat in every heavyweight race of the Olympic Games in 2000 and World Championships in 2001 and 2002, and the top 170 competitors in the British Indoor Rowing Championships in 2001 and 2002. Data were only included in subsequent analysis if there was good evidence that the athlete or crew completed the race in the fastest possible time. The remaining data were grouped to determine if there were different strategies adopted for on-water versus ergometer trials, "winners" versus "losers", and men versus women. Results: Of the 1612 on-water race profiles considered, 948 fitted the inclusion criteria. There were no differences in pacing profile between winners and losers, and men and women, although on-water and ergometry trials showed a competitively meaningful significant difference over the first 500 m sector. The average profile showed that rowers performed the first 500 m of the race faster than subsequent sectors—that is, at a speed of 103.3% of the average speed for the whole race, with subsequent sectors rowed at 99.0%, 98.3%, and 99.7% of average speed for on-water rowing, and 101.5%, 99.8%, 99.0%, and 99.7% for ergometry. Conclusions: These data indicate that all athletes or crews adopted a similar fast start strategy regardless of finishing position or sex, although the exact pace profile was dependent on rowing mode. This strategy should be considered by participants in 2000 m rowing competitions. PMID:15618339

  4. CT Angiography after 20 Years

    PubMed Central

    Rubin, Geoffrey D.; Leipsic, Jonathon; Schoepf, U. Joseph; Fleischmann, Dominik; Napel, Sandy

    2015-01-01

    Through a marriage of spiral computed tomography (CT) and graphical volumetric image processing, CT angiography was born 20 years ago. Fueled by a series of technical innovations in CT and image processing, over the next 5–15 years, CT angiography toppled conventional angiography, the undisputed diagnostic reference standard for vascular disease for the prior 70 years, as the preferred modality for the diagnosis and characterization of most cardiovascular abnormalities. This review recounts the evolution of CT angiography from its development and early challenges to a maturing modality that has provided unique insights into cardiovascular disease characterization and management. Selected clinical challenges, which include acute aortic syndromes, peripheral vascular disease, aortic stent-graft and transcatheter aortic valve assessment, and coronary artery disease, are presented as contrasting examples of how CT angiography is changing our approach to cardiovascular disease diagnosis and management. Finally, the recently introduced capabilities for multispectral imaging, tissue perfusion imaging, and radiation dose reduction through iterative reconstruction are explored with consideration toward the continued refinement and advancement of CT angiography. PMID:24848958

  5. Reducing CT dose in myocardial perfusion SPECT/CT.

    PubMed

    O'Shaughnessy, Emma; Dixon, Kat L

    2015-11-01

    The aim of this study was to reduce the radiation dose arising from computed tomography (CT) attenuation correction to single photon emission computed tomography myocardial perfusion imaging studies without adversely affecting its accuracy. Using the Perspex CTDI phantom with the Xi detector to measure dose, CT scans were acquired using the Siemens Symbia T over the full range of CT settings available. Using the default setting 'AECmean', the measured dose at the centre of the phantom was 1.68 mGy and the breast dose from the scout view was 0.30 mGy. The lowest dose was achieved using the dose modulation setting in which the doses were reduced to 1.21 mGy and undetectable (<0.01 mGy), respectively. To observe the effect of changing these settings, 30 patients received a stress scan with default CT settings and a rest scan utilizing single photon emission computed tomography-guided CT and the dose modulation CT settings. Results showed a mean effective dose reduction of 23.6%. The dose reduction was greatest for larger patients, with the largest dose reduction for one patient being 72%. There was no apparent difference in attenuation correction between the two sets of resultant images. These new lower-dose settings are now applied to all clinical myocardial perfusion imaging studies. PMID:26302461

  6. SU-E-I-33: Establishment of CT Diagnostic Reference Levels in Province Nova Scotia

    SciTech Connect

    Tonkopi, E; Abdolell, M; Duffy, S

    2015-06-15

    Purpose: To evaluate patient radiation dose from the most frequently performed CT examinations and to establish provincial diagnostic reference levels (DRLs) as a tool for protocol optimization. Methods: The study investigated the following CT examinations: head, chest, abdomen/pelvis, and chest/abdomen/pelvis (CAP). Dose data, volume CT dose index (CTDIvol) and dose-length product (DLP), were collected from 15 CT scanners installed during 2004–2014 in 11 hospital sites of Nova Scotia. All scanners had dose modulation options and multislice capability (16–128 detector rows). The sample for each protocol included 15 average size patients (70±20 kg). Provincial DRLs were calculated as the 75th percentile of patient dose distributions. The differences in dose between hospitals were evaluated with a single factor ANOVA statistical test. Generalized linear modeling was used to determine the factors associated with higher radiation dose. A sample of 36 abdominal studies performed on three different scanners was blinded and randomized for an assessment by an experienced radiologist who graded the imaging quality of anatomic structures. Results: Data for 900 patients were collected. The DRLs were proposed using CTDIvol (mGy) and DLP (mGy*cm) values for CT head (67 and 1049, respectively), chest (12 and 393), abdomen/pelvis (16 and 717), and CAP (14 and 1034). These DRLs were lower than the published national data except for the head CTDIvol. The differences between the means of the dose distributions from each scanner were statistically significant (p<0.05) for all examinations. A very weak correlation was found between the dose and the scanner age or the number of slices with Pearson’s correlation coefficients of 0.011–0.315. The blinded analysis of image quality demonstrated no clinically significant difference except for the noise category. Conclusion: Provincial DRLs were established for typical CT examinations. The variations in dose between the hospitals

  7. 30 CFR 585.300 - What types of activities are authorized by ROW grants and RUE grants issued under this part?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... grants and RUE grants issued under this part? 585.300 Section 585.300 Mineral Resources BUREAU OF OCEAN... Renewable Energy Activities Row Grants and Rue Grants § 585.300 What types of activities are authorized by ROW grants and RUE grants issued under this part? (a) An ROW grant authorizes the holder to install...

  8. 30 CFR 285.502 - What initial payment requirements must I meet to obtain a noncompetitive lease, ROW grant, or RUE...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... to obtain a noncompetitive lease, ROW grant, or RUE grant? 285.502 Section 285.502 Mineral Resources... noncompetitive lease, ROW grant, or RUE grant? When requesting a noncompetitive lease, you must meet the initial... instrument. No initial payment is required when requesting noncompetitive ROW grants and RUE grants. (a)...

  9. 30 CFR 585.502 - What initial payment requirements must I meet to obtain a noncompetitive lease, ROW grant, or RUE...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... to obtain a noncompetitive lease, ROW grant, or RUE grant? 585.502 Section 585.502 Mineral Resources..., ROW grant, or RUE grant? When requesting a noncompetitive lease, you must meet the initial payment... payment is required when requesting noncompetitive ROW grants and RUE grants. (a) If you request...

  10. 30 CFR 585.520 - What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... obtain my limited lease, ROW grant, or RUE grant? 585.520 Section 585.520 Mineral Resources BUREAU OF... Assurance for Limited Leases, Row Grants, and Rue Grants § 585.520 What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant? (a) Before BOEM will issue your limited...

  11. 30 CFR 585.502 - What initial payment requirements must I meet to obtain a noncompetitive lease, ROW grant, or RUE...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... to obtain a noncompetitive lease, ROW grant, or RUE grant? 585.502 Section 585.502 Mineral Resources..., ROW grant, or RUE grant? When requesting a noncompetitive lease, you must meet the initial payment... payment is required when requesting noncompetitive ROW grants and RUE grants. (a) If you request...

  12. 30 CFR 285.520 - What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... obtain my limited lease, ROW grant, or RUE grant? 285.520 Section 285.520 Mineral Resources BUREAU OF... Assurance Requirements Financial Assurance for Limited Leases, Row Grants, and Rue Grants § 285.520 What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant? (a) Before...

  13. 30 CFR 585.300 - What types of activities are authorized by ROW grants and RUE grants issued under this part?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... grants and RUE grants issued under this part? 585.300 Section 585.300 Mineral Resources BUREAU OF OCEAN... Renewable Energy Activities Row Grants and Rue Grants § 585.300 What types of activities are authorized by ROW grants and RUE grants issued under this part? (a) An ROW grant authorizes the holder to install...

  14. 30 CFR 285.300 - What types of activities are authorized by ROW grants and RUE grants issued under this part?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... grants and RUE grants issued under this part? 285.300 Section 285.300 Mineral Resources MINERALS... Renewable Energy Activities Row Grants and Rue Grants § 285.300 What types of activities are authorized by ROW grants and RUE grants issued under this part? (a) An ROW grant authorizes the holder to install...

  15. 30 CFR 285.520 - What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... obtain my limited lease, ROW grant, or RUE grant? 285.520 Section 285.520 Mineral Resources MINERALS... for Limited Leases, Row Grants, and Rue Grants § 285.520 What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant? (a) Before MMS will issue your limited...

  16. 30 CFR 585.520 - What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... obtain my limited lease, ROW grant, or RUE grant? 585.520 Section 585.520 Mineral Resources BUREAU OF... Assurance for Limited Leases, Row Grants, and Rue Grants § 585.520 What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant? (a) Before BOEM will issue your limited...

  17. 30 CFR 585.300 - What types of activities are authorized by ROW grants and RUE grants issued under this part?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... grants and RUE grants issued under this part? 585.300 Section 585.300 Mineral Resources BUREAU OF OCEAN... Renewable Energy Activities Row Grants and Rue Grants § 585.300 What types of activities are authorized by ROW grants and RUE grants issued under this part? (a) An ROW grant authorizes the holder to install...

  18. 30 CFR 585.520 - What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... obtain my limited lease, ROW grant, or RUE grant? 585.520 Section 585.520 Mineral Resources BUREAU OF... Assurance for Limited Leases, Row Grants, and Rue Grants § 585.520 What financial assurance must I provide when I obtain my limited lease, ROW grant, or RUE grant? (a) Before BOEM will issue your limited...

  19. 30 CFR 585.502 - What initial payment requirements must I meet to obtain a noncompetitive lease, ROW grant, or RUE...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... to obtain a noncompetitive lease, ROW grant, or RUE grant? 585.502 Section 585.502 Mineral Resources..., ROW grant, or RUE grant? When requesting a noncompetitive lease, you must meet the initial payment... payment is required when requesting noncompetitive ROW grants and RUE grants. (a) If you request...

  20. 30 CFR 285.300 - What types of activities are authorized by ROW grants and RUE grants issued under this part?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... grants and RUE grants issued under this part? 285.300 Section 285.300 Mineral Resources BUREAU OF OCEAN... and Easement Grants for Renewable Energy Activities Row Grants and Rue Grants § 285.300 What types of activities are authorized by ROW grants and RUE grants issued under this part? (a) An ROW grant...

  1. Multiple myeloma: evaluation by CT

    SciTech Connect

    Schreiman, J.S.; McLeod, R.A.; Kyle, R.A.; Beabout, J.W.

    1985-02-01

    Although patients who have multiple myeloma usually have straightforward clinical symptoms and corroborative radiographs, in some instances, these patients will present atypically, with symptoms suggesting active disease but radiographs that are normal or nonspecific. The authors reviewed the records of 32 patients who had documented multiple myeloma and had undergone CT examinations, assessing the value of those examinations. Although CT is not indicated in all patients who have multiple myeloma, it is especially useful in patients who have bone pain and normal or nonspecific radiographs. CT provided confirmatory information in all cases in which lesions were seen on radiographs. CT also frequently demonstrated a greater extent of disease than could be appreciated on the radiographs.

  2. Children, CT Scan and Radiation

    PubMed Central

    Bajoghli, Morteza; Bajoghli, Farshad; Tayari, Nazila; Rouzbahani, Reza

    2010-01-01

    Children are more sensitive to radiation than adults. Computerized tomography (CT) consists of 25 % of all medical imaging. It was estimated that more than 2% of all carcinomas in the USA are due to CT scans. There is an ongoing focus on the reduction of CT scan radiation dose. Awareness about risk-benefits of CT has increased. Reduction of radiological exam is an important issue because the accumulation effects of radiation can be hazardous. In addition, proper protocol should be followed for diagnostic procedures of ionization radiation and computerized tomography. Effective radiation dose should range from 0.8 to 10.5 millisievert. The same protocol should be followed in different hospitals as well. Basic principles of radiation protection should be monitored. As much as possible, both technician and radiologist must be present during computerized tomography for children, and MRI and ultrasound should be replaced if possible. PMID:21566776

  3. CT Demonstration of Caput Medusae

    ERIC Educational Resources Information Center

    Weber, Edward C.; Vilensky, Joel A.

    2009-01-01

    Maximum intensity and volume rendered CT displays of caput medusae are provided to demonstrate both the anatomy and physiology of this portosystemic shunt associated with portal hypertension. (Contains 2 figures.)

  4. Your Radiologist Explains CT Colonography

    MedlinePlus

    ... this Site RadiologyInfo.org is produced by: Image/Video Gallery Your Radiologist Explains CT Colonography (Virtual colonoscopy) ... time and for your attention! Spotlight Recently posted: Video: Ultrasound-guided Breast Biopsy Video: Breast MRI Video: ...

  5. Children's (Pediatric) CT (Computed Tomography)

    MedlinePlus

    ... like traditional x-rays, produces multiple images or pictures of the inside of the body. The cross- ... CT, it is possible to obtain very detailed pictures of the heart and blood vessels in children, ...

  6. Multiplanar CT of the spine

    SciTech Connect

    Rothman, S.L.G.; Glenn, W.V. Jr.

    1986-01-01

    This is an illustrated text on computed tomography (CT) of the lumbar spine with an emphasis on the role and value of multiplanar imaging for helping determine diagnoses. The book has adequate discussion of scanning techniques for the different regions, interpretations of various abnormalities, degenerative disk disease, and different diagnoses. There is a 50-page chapter on detailed sectional anatomy of the spine and useful chapters on the postoperative spine and the planning and performing of spinal surgery with CT multiplanar reconstruction. There are comprehensive chapters on spinal tumors and trauma. The final two chapters of the book are devoted to CT image processing using digital networks and CT applications of medical computer graphics.

  7. Adrenal cortex dysfunction: CT findings

    SciTech Connect

    Huebener, K.H.; Treugut, H.

    1984-01-01

    The computed tomographic appearance of the adrenal gland was studied in 302 patients with possible endocrinologic disease and 107 patients undergoing CT for nonendocrinologic reasons. Measurements of adrenal size were also made in 100 adults with no known adrenal pathology. CT proved to be a sensitive diagnostic tool in combination with clinical studies. When blood hormone levels are increased, CT can differentiate among homogeneous organic hyperplasia, nodular hyperplasia, benign adenoma, and malignant cortical adenoma. When blood hormone levels are decreased, CT can demonstrate hypoplasia or metastatic tumorous destruction. Calcifications can be demonstrated earlier than on plain radiographs. When hormone elimination is increased, the morphologic substrate can be identified; tumorous changes can be localized and infiltration of surrounding organs recognized.

  8. CT Perfusion of the Head

    MedlinePlus

    ... scanning combines special x-ray equipment with sophisticated computers to produce multiple images or pictures of the ... being studied can then be examined on a computer monitor, printed or transferred to a CD. CT ...

  9. Short communication: Feed bunk utilization in dairy cows housed in pens with either two or three rows of free stalls.

    PubMed

    Mentink, R L; Cook, N B

    2006-01-01

    The goal of this observational study was to determine whether there were significant differences in feed bunk utilization patterns of dairy cows in free-stall pens with either 2 or 3 rows of stalls. Previously recorded 24-h videos of the high-yielding, mature cow group in 5 herds with 2-row pen designs and 5 herds with 3-row pen designs that were provided fresh TMR once a day after the morning milking were scan-sampled at 10-min intervals to record feed bunk utilization score (proportion of feed bunk spaces in the pen that were filled). Data were aligned according to peak feed bunk utilization score following fresh feed delivery (primary peaks), return from the afternoon milking (secondary peaks), and return from the night milking (tertiary peaks). Bunk utilization score was highest for primary peaks; scores were not significantly different between 2- and 3-row pens (0.65 vs. 0.71 +/- 0.1, respectively), and rates of decline in bunk utilization score were similar over the ensuing 90-min period between pen designs. Differences in bunk utilization between peak type and pen row type were observed; tertiary bunk utilization with 2-row pens was significantly lower than bunk utilization with 3-row pens and significantly lower than either primary or secondary bunk utilization in 2-row pens. The feed space allowance provided by a 2-row pen design potentially allows cows to demonstrate other important feeding behaviors, such as avoidance of conflicts and maintenance of greater inter-cow distances between neighbors while feeding.

  10. SU-E-T-458: Determining Threshold-Of-Failure for Dead Pixel Rows in EPID-Based Dosimetry

    SciTech Connect

    Gersh, J; Wiant, D

    2014-06-01

    Purpose: A pixel correction map is applied to all EPID-based applications on the TrueBeam (Varian Medical Systems, Palo Alto, CA). When dead pixels are detected, an interpolative smoothing algorithm is applied using neighboring-pixel information to supplement missing-pixel information. The vendor suggests that when the number of dead pixels exceeds 70,000, the panel should be replaced. It is common for entire detector rows to be dead, as well as their neighboring rows. Approximately 70 rows can be dead before the panel reaches this threshold. This study determines the number of neighboring dead-pixel rows that would create a large enough deviation in measured fluence to cause failures in portal dosimetry (PD). Methods: Four clinical two-arc VMAT plans were generated using Eclipse's AXB algorithm and PD plans were created using the PDIP algorithm. These plans were chosen to represent those commonly encountered in the clinic: prostate, lung, abdomen, and neck treatments. During each iteration of this study, an increasing number of dead-pixel rows are artificially applied to the correction map and a fluence QA is performed using the EPID (corrected with this map). To provide a worst-case-scenario, the dead-pixel rows are chosen so that they present artifacts in the highfluence region of the field. Results: For all eight arc-fields deemed acceptable via a 3%/3mm gamma analysis (pass rate greater than 99%), VMAT QA yielded identical results with a 5 pixel-width dead zone. When 10 dead lines were present, half of the fields had pass rates below the 99% pass rate. With increasing dead rows, the pass rates were reduced substantially. Conclusion: While the vendor still suggests to request service at the point where 70,000 dead rows are measured (as recommended by the vendor), the authors suggest that service should be requested when there are greater than 5 consecutive dead rows.

  11. Airborne observed solar elevation and row direction effects on the near-IR/red ratio of cotton

    NASA Technical Reports Server (NTRS)

    Millard, J. P.; Jackson, R. D.; Goettelman, R. C.; Leroy, M. J. (Principal Investigator)

    1981-01-01

    An airborne multispectral scanner was used to obtain data over two adjacent cotton fields having rows perpendicular to one another, at three times of day (different solar elevations), and on two dates (different plant size). The near IR/red ratios were displayed in image form, so that within-field variations and differences between fields could be easily assessed. The ratio varied with changing Sun elevation for north-south oriented rows, but no variation was detected for east-west oriented rows.

  12. Ct2 Bladder Cancer.

    PubMed

    Soloway, Mark S

    2016-09-01

    The patient is an 80-year-old man who presented with gross hematuria. His past medical history indicates he was a cigarette smoker with 50 pack/years. He was successfully treated for carcinoma of the lung 7 years ago. He received chemotherapy, radiation, and surgery. He has mild COPD but has a good performance status. His laboratory studies do not indicate any abnormalities in terms of renal function. He does not have any significant cardiac disease. He has a medium build. He had prostate cancer and underwent a successful radical prostatectomy 10 years ago. His PSA is undetectable. He has some urinary incontinence and wears two pads/day. He underwent the appropriate investigations for gross hematuria. A CT scan of the abdomen and pelvis was normal with the exception of a 4-cm posterior mass in the bladder. There was no hydronephrosis and no enlarged lymph nodes. He underwent a transurethral resection of a solitary bladder tumor performed by another urologist. The tumor was described as large and sessile. It was located on the posterior wall and was approximately 4 cm. The bimanual examination did not reveal a mass. The pathology report stated that the tumor was a high-grade urothelial carcinoma with invasion into the muscularis propria. There was no lymphovascular invasion. I performed a reTURBT, and at that procedure, I did not identify any obvious tumor but the prior resection site was evident. I resected the prior tumor site quite extensively both in depth and width. The pathology revealed only focal carcinoma in situ. There was ample muscle in the specimen and there was some fat as well. As stated, they were free of any cancer. The patient is receptive to any treatment approach.

  13. Ct2 Bladder Cancer.

    PubMed

    Soloway, Mark S

    2016-09-01

    The patient is an 80-year-old man who presented with gross hematuria. His past medical history indicates he was a cigarette smoker with 50 pack/years. He was successfully treated for carcinoma of the lung 7 years ago. He received chemotherapy, radiation, and surgery. He has mild COPD but has a good performance status. His laboratory studies do not indicate any abnormalities in terms of renal function. He does not have any significant cardiac disease. He has a medium build. He had prostate cancer and underwent a successful radical prostatectomy 10 years ago. His PSA is undetectable. He has some urinary incontinence and wears two pads/day. He underwent the appropriate investigations for gross hematuria. A CT scan of the abdomen and pelvis was normal with the exception of a 4-cm posterior mass in the bladder. There was no hydronephrosis and no enlarged lymph nodes. He underwent a transurethral resection of a solitary bladder tumor performed by another urologist. The tumor was described as large and sessile. It was located on the posterior wall and was approximately 4 cm. The bimanual examination did not reveal a mass. The pathology report stated that the tumor was a high-grade urothelial carcinoma with invasion into the muscularis propria. There was no lymphovascular invasion. I performed a reTURBT, and at that procedure, I did not identify any obvious tumor but the prior resection site was evident. I resected the prior tumor site quite extensively both in depth and width. The pathology revealed only focal carcinoma in situ. There was ample muscle in the specimen and there was some fat as well. As stated, they were free of any cancer. The patient is receptive to any treatment approach. PMID:27457483

  14. Nozzle Fuzzy Controller of Agricultural Spraying Robot Aiming Toward Crop Rows

    NASA Astrophysics Data System (ADS)

    Ren, Jianqiang

    A novel nozzle controller of spraying robot aiming toward crop-rows based on fuzzy control theory was studied in this paper to solve the shortcomings of existing nozzle control system, such as the long regulation time, the higher overshoot and so on. The new fuzzy controller mainly consists of fuzzification interface, defuzzification interface, rule-base and inference mechanism. Considering the actual application, the fuzzy controller was designed as a 2-inputs&1-output closed-loop system. The inputs are the distance from nozzle to crop row and its change rate, the output is the control signal to the execution unit. Based on the design project, we selected the FMC chip NLX230, the EMCU chip AT89S52 and the EEPROM chip AT93C57 to make the fuzzy controller. Experimental results show that the project is workable and efficient, it can solve the shortcomings of existing controller perfectly and the control efficiency can be improved greatly.

  15. Spreadsheet Calculation of Jets in Crossflow: Opposed Rows of Slots Slanted at 45 Degrees

    NASA Technical Reports Server (NTRS)

    Holderman, James D.; Clisset, James R.; Moder, Jeffrey P.

    2011-01-01

    The purpose of this study was to extend a baseline empirical model to the case of jets entering the mainstream flow from opposed rows of 45 degrees slanted slots. The results in this report were obtained using a spreadsheet modified from the one posted with NASA/TM--2010-216100. The primary conclusion in this report is that the best mixing configuration for opposed rows of 45 degrees slanted slots at any down stream distance is a parallel staggered configuration where the slots are angled in the same direction on top and bottom walls and one side is shifted by half the orifice spacing. Although distributions from perpendicular slanted slots are similar to those from parallel staggered configurations at some downstream locations, results for perpendicular slots are highly dependent on downstream distance and are no better than parallel staggered slots at locations where they are similar and are worse than parallel ones at other distances.

  16. Airborne ROWS data report for the high resolution experiment, June 1993

    NASA Technical Reports Server (NTRS)

    Vandemark, D.; Hines, D.; Bailey, S.; Stewart, K.

    1994-01-01

    Airborne radar ocean wave spectrometer (ROWS) data collected during the Office of Naval Research's High Resolution Remote Sensing Experiment of June 1993 are presented. This data summary covers six flights made using NASA's T-39 aircraft over a region of the North Atlantic off the coast of North Carolina and includes multiple crossings of the gulf stream. The Ku-band ROWS was operated in a configuration which continuously switched between an altimeter and a spectrometer channel. Data derived from the two channels include altimeter radar cross section, altimeter-derived sea surface mean square slope and wind speed, and directional and nondirectional longwave spectra. Discussion is provided for several events of particular interest.

  17. Performance and blood lactate on Gjessing and Concept II rowing ergometers.

    PubMed

    Lormes, W; Buckwitz, R; Rehbein, H; Steinacker, J M

    1993-09-01

    The Gjessing (GE) and the wind resistance (Concept II, CII) rowing ergometers were compared in 11 trained subjects during incremental exercise. Maximum power was 255 (200-370) W on GE, but 294 (204-393) W in CII (median and range, p < 0.05). If power was directly measured by a strain gauge and a displacement transducer in the CII, a 5.1% (3.2%-7.8%) higher maximum performance was obtained (314 [223-413] W, p < 0.05). Maximum stroke rates were higher in GE (33 [27-37]/min) than in CII (29 [24-35]/min, NS). Blood lactate increased faster with work rate and lactic anaerobic threshold was therefore lower in GE. Blood lactate was higher for every heart rate for GE compared to CII. This suggests higher anaerobic effort in GE rowing.

  18. A spectroscopic case for SPSi detection: The third-row in a single molecule

    NASA Astrophysics Data System (ADS)

    Finney, Brian; Fortenberry, Ryan C.; Francisco, Joseph S.; Peterson, Kirk A.

    2016-09-01

    In moving beyond the second row of the periodic table for molecules of astronomical and atmospheric significance, the exploration of sulfur and phosphorus chemistry is essential. Additionally, silicon is abundant in most astrophysical environments and is a major component of most rocky bodies. The triatomic molecule composed of each of these atoms is therefore a tantalizing candidate for spectroscopic characterization for astrophysical reasons as well as gaining further understanding into the chemical physics of molecules that are not carbon-based. The current work employs high-level quantum chemical techniques to provide new insights into this simplest of heterogeneous third-row atom systems. The fundamental vibrational frequencies are all within the 350-600 cm-1 range and do not demonstrate strong anharmonicities. These frequencies, rotational constants, vibrationally excited state spectroscopic data, and related isotopic substitution information produced will aid in laboratory experimentation and, even potentially, telescopic observation since modern instruments possess the power to resolve extremely fine details.

  19. A low complexity reweighted proportionate affine projection algorithm with memory and row action projection

    NASA Astrophysics Data System (ADS)

    Liu, Jianming; Grant, Steven L.; Benesty, Jacob

    2015-12-01

    A new reweighted proportionate affine projection algorithm (RPAPA) with memory and row action projection (MRAP) is proposed in this paper. The reweighted PAPA is derived from a family of sparseness measures, which demonstrate performance similar to mu-law and the l 0 norm PAPA but with lower computational complexity. The sparseness of the channel is taken into account to improve the performance for dispersive system identification. Meanwhile, the memory of the filter's coefficients is combined with row action projections (RAP) to significantly reduce computational complexity. Simulation results demonstrate that the proposed RPAPA MRAP algorithm outperforms both the affine projection algorithm (APA) and PAPA, and has performance similar to l 0 PAPA and mu-law PAPA, in terms of convergence speed and tracking ability. Meanwhile, the proposed RPAPA MRAP has much lower computational complexity than PAPA, mu-law PAPA, and l 0 PAPA, etc., which makes it very appealing for real-time implementation.

  20. An 8×8 Row-Column Summing Readout Electronics for Preclinical Positron Emission Tomography Scanners.

    PubMed

    Shih, Y C; Sun, F W; Macdonald, L R; Otis, B P; Miyaoka, R S; McDougald, W; Lewellen, T K

    2009-10-24

    This work presents a row/column summing readout electronics for an 8×8 silicon photomultiplier array. The summation circuit greatly reduces the number of electronic channels, which is desirable for pursuing higher resolution positron emission tomography scanners. By using a degenerated common source topology in the summation circuit, more fan-in is possible and therefore a greater reduction in the number of electronic channels can be achieved. The timing signal is retrieved from a common anode, which allows the use of a single fast-sampling analog to digital converter (ADC) for the timing channel and slower, lower power ADCs for the 64 spatial channels. Preliminary results of one row summation of the 8×8 readout electronics exhibited FWHM energy resolution of 17.8% and 18.3% with and without multiplexing, respectively. The measured timing resolution is 2.9ns FWHM.

  1. Functional outcomes of proximal row carpectomy: 2-year follow-up

    PubMed Central

    Mandarano-Filho, Luiz Garcia; Campioto, Débora Schalge; Bezuti, Márcio Takey; Mazzer, Nilton; Barbieri, Cláudio Henrique

    2015-01-01

    ABSTRACT OBJECTIVE : To evaluate functional outcomes of patients submit-ted to proximal row carpectomy for the treatment of wrist arthri-tis METHODS : This is a retrospective study using wrist motion and grip strenght of patients diagnosed with Kienböck disease and scaphoid non-union surgically treated by this technique RESULTS : Eleven patients with 2-year follow-up were evaluated. Wrist motion (flexion, extension and ulnar deviation) and grip strength were significantly better from preoperative values. Ho-wever, no difference in radial deviation was observed in these patients CONCLUSION : Proximal row carpectomy provides an alternative option for treatment of wrist arthritis, resulting in better active range of motion and grip strength in the long run. Level of Evidence IV, Case Series. PMID:27057144

  2. Survey of forensic psychiatrists on evaluation and treatment of prisoners on death row.

    PubMed

    Leong, G B; Silva, J A; Weinstock, R; Ganzini, L

    2000-01-01

    Psychiatrists have debated their role in evaluating prisoners accused of capital crimes and in treating prisoners on death row when restoration of competence would result in execution. Despite debate, there are no previous surveys of psychiatrists' opinions on this issue. We sent an anonymous questionnaire to all board-certified forensic psychiatrists in the United States. Of the 456 forensic psychiatrists identified, 290 (64%) returned the survey. Most respondents supported a role, in at least some cases, for psychiatric evaluation of prisoners accused of capital crimes. Respondents were divided on whether or not psychiatrists should treat incompetent death row prisoners if restoration of competence would result in execution. Attitudes about the ethical acceptability of capital punishment were associated with views about the psychiatrists' role but were not determinative in every case.

  3. An 8×8 Row-Column Summing Readout Electronics for Preclinical Positron Emission Tomography Scanners

    PubMed Central

    Shih, Y. C.; Sun, F. W.; MacDonald, L. R.; Otis, B. P.; Miyaoka, R. S.; McDougald, W.; Lewellen, T. K.

    2010-01-01

    This work presents a row/column summing readout electronics for an 8×8 silicon photomultiplier array. The summation circuit greatly reduces the number of electronic channels, which is desirable for pursuing higher resolution positron emission tomography scanners. By using a degenerated common source topology in the summation circuit, more fan-in is possible and therefore a greater reduction in the number of electronic channels can be achieved. The timing signal is retrieved from a common anode, which allows the use of a single fast-sampling analog to digital converter (ADC) for the timing channel and slower, lower power ADCs for the 64 spatial channels. Preliminary results of one row summation of the 8×8 readout electronics exhibited FWHM energy resolution of 17.8% and 18.3% with and without multiplexing, respectively. The measured timing resolution is 2.9ns FWHM. PMID:20729983

  4. Sex and relationships on the street: how homeless men judge partner risk on Skid Row.

    PubMed

    Brown, Ryan A; Kennedy, David P; Tucker, Joan S; Wenzel, Suzanne L; Golinelli, Daniela; Wertheimer, Samuel R; Ryan, Gery W

    2012-04-01

    Homeless men in the U.S. represent a large and growing population, and have elevated rates of HIV/AIDS and sexual risk behaviors, including unprotected sex with women. We conducted qualitative interviews (n = 30) with homeless men using shelters and meal lines in downtown Los Angeles (Skid Row) to better understand how such men view the risks of sexual encounters with female partners. Men living on Skid Row perceived multiple risks, including HIV and unwanted pregnancy as well as emotional trauma, loss of resources, exacerbation of drug addiction, and physical attack. Respondents described using visual and behavioral cues, social reputation, geographical location, feelings of trust, perceived relationship seriousness, and medically inaccurate "folk" beliefs to judge whether partners were risky and/or condom use was warranted. Medically inaccurate beliefs suggest the potential utility of evidence-based interventions to change such beliefs. We also consider implications for relationships on the street and housing interventions. PMID:21630015

  5. Mapping the crop row direction by using Formosat-2 panchromatic images.

    NASA Astrophysics Data System (ADS)

    Marais-Sicre, C.; Baup, F.; Fieuzal, R.

    2012-04-01

    The detection of crop row direction is a key factor for landscape analyses from satellite images. In optical and microwave frequency domains, Kimes and al, 1983 and Ulaby and al, 1984 shown the strong impact of the crop row orientation on the optical reflectance (Bidirectional reflectance distribution function) and on the radar backscattering coefficient (from L to X band). Consequently, it is particularly important to consider this parameter for remote sensing analyses but also in the physical and empirical approaches intended to the estimation of biophysical parameters (vegetation biomass, humidity, soil moisture content, tillage, runoff, erosion…) at the agricultural field scale. The studied area is located near Toulouse (South-west of France) in a region of alluvial plains and hills, which are mostly mixed farming and governed by a temperate climate with an annual rainfall of about 600mm per year. The region is composed of a wide variety of irrigated and non-irrigated crops (wheat, sunflower, corn, hemp…). Agricultural fields are strongly contrasted in terms of geometric forms, surface area (from 1ha to 50ha), type of soils, slopes... The remote sensing analyses are based on a time series of 13 panchromatic Formosat-2 images, acquired with a spatial resolution of 2 meters, and processed with a TOA (Top of Atmosphere) radiometric correction. Ground data are collected, the closest of satellite acquisitions, over 232 plots during the MCM'10 experiment (Multispectral Crop Monitoring, http://www.cesbio.ups-tlse.fr/us/mcm.html) conducted by the CESBIO laboratory in 2010. The proposed approach consists in estimating row direction, by using directional convolution filters and operators of mathematical morphology. First of all, one date capabilities is discussed, improved by multi-temporal analyses. Then, an original method is proposed for extrapolating the estimated row direction to the scene (over the Formosat-2 swath). Best results, obtained for multi

  6. Helical waves and non-linear dynamics of fluid/structure interactions in a tube row

    SciTech Connect

    Moon, F.C.; Thothadri, M.

    1997-12-31

    The goal of this study has been to investigate low-dimensional models for fluid-structure dynamics of flow across a row of cylindrical tubes. Four principle results of this experimental-theoretical study are discussed. (i) Experimental evidence has shown that the dynamic instability of the tube row is a subcritical Hopf bifurcation. (ii) The critical flow velocity decreases as the number of flexible cylinders increases. (iii) The linear model exhibits coupled helical wave solutions in the tube dynamics. (iv) A nonlinear model of the tube motions shows a complex subcritical Hopf bifurcation with a secondary bifurcation to a torus or quasi-periodic oscillation. In this analysis the tools of center manifolds, normal forms and numerical simulation are used.

  7. A numerical study of bench blast row delay timing and its influence on percent cast

    SciTech Connect

    Preece, D.S.

    1992-11-01

    Sandia National Laboratories and ICI Explosives USA have worked together since 1987 to develop computer modeling techniques for Rock Blasting. A result of this effort is the computer program DMC (Distinct Motion Code) which was developed for two-dimensional simulation of rock motion following a blast (Taylor and Preece, 1989 & 1992). This program has been used to study blasting-induced rock motion resulting from oil shale mining and has been coupled with a gas flow computation capability for better treatment of the explosive behavior. This past year it has been customized for simulations of bench blasting in coat mines and rock quarries (Preece and Knudsen, 1992b). The explicit descretized nature of DMC gives it an advantage over previous blast modeling programs because subtle differences, such as row delay timing, have an influence on the results. This paper will present a DMC study of the influence on percent cast of row delay timing in a typical coal mine bench blast.

  8. Corn Response as Affected by Planting Distance from the Center of Strip-Till Fertilized Rows

    PubMed Central

    Adee, Eric; Hansel, Fernando D.; Ruiz Diaz, Dorivar A.; Janssen, Keith

    2016-01-01

    Strip-till has been used at a large scale in east central Kansas as an alternative to earlier planting dates under a no-till system. To determine the effects of planting corn (Zea mays) under previously established strip-tilled fertilized rows, experiments were conducted on an Osage silty clay loam soil in 2006 and 2008 and on a Woodson silt loam soil in 2009, 2010, and 2011 using three different planting distances from the strip-tilled fertilized rows (0, 10, 20, and 38 cm) with a strip-till operation performed between 1 and 73 days before planting. The depth of the strip-till fertilizer application was 13–15 cm below the soil surface. Corn that was planted 10 cm from the fertilized row showed greater early season growth, higher plant population, and grain yield. Planting 20 and 38 cm from the center of the fertilized rows showed none of the benefits that are typically associated with strip-tillage system. Enough time should be allowed between the strip-till operation and planting to reach satisfactory soil conditions (e.g., moist and firm seedbed). Our results suggest that the best location for planting strip-tilled fertilized corn vary depending on soil and climatic conditions as well as the time between fertilizer application with the strip-till operation and planting. With fewer number of days, planting directly on the center of fertilized strip-till resulted in decreased plant population and lower grain yield. However, the greatest yield benefit across different planting conditions was attained when planting within 10 cm of the strip. PMID:27588024

  9. Corn Response as Affected by Planting Distance from the Center of Strip-Till Fertilized Rows.

    PubMed

    Adee, Eric; Hansel, Fernando D; Ruiz Diaz, Dorivar A; Janssen, Keith

    2016-01-01

    Strip-till has been used at a large scale in east central Kansas as an alternative to earlier planting dates under a no-till system. To determine the effects of planting corn (Zea mays) under previously established strip-tilled fertilized rows, experiments were conducted on an Osage silty clay loam soil in 2006 and 2008 and on a Woodson silt loam soil in 2009, 2010, and 2011 using three different planting distances from the strip-tilled fertilized rows (0, 10, 20, and 38 cm) with a strip-till operation performed between 1 and 73 days before planting. The depth of the strip-till fertilizer application was 13-15 cm below the soil surface. Corn that was planted 10 cm from the fertilized row showed greater early season growth, higher plant population, and grain yield. Planting 20 and 38 cm from the center of the fertilized rows showed none of the benefits that are typically associated with strip-tillage system. Enough time should be allowed between the strip-till operation and planting to reach satisfactory soil conditions (e.g., moist and firm seedbed). Our results suggest that the best location for planting strip-tilled fertilized corn vary depending on soil and climatic conditions as well as the time between fertilizer application with the strip-till operation and planting. With fewer number of days, planting directly on the center of fertilized strip-till resulted in decreased plant population and lower grain yield. However, the greatest yield benefit across different planting conditions was attained when planting within 10 cm of the strip.

  10. Corn Response as Affected by Planting Distance from the Center of Strip-Till Fertilized Rows.

    PubMed

    Adee, Eric; Hansel, Fernando D; Ruiz Diaz, Dorivar A; Janssen, Keith

    2016-01-01

    Strip-till has been used at a large scale in east central Kansas as an alternative to earlier planting dates under a no-till system. To determine the effects of planting corn (Zea mays) under previously established strip-tilled fertilized rows, experiments were conducted on an Osage silty clay loam soil in 2006 and 2008 and on a Woodson silt loam soil in 2009, 2010, and 2011 using three different planting distances from the strip-tilled fertilized rows (0, 10, 20, and 38 cm) with a strip-till operation performed between 1 and 73 days before planting. The depth of the strip-till fertilizer application was 13-15 cm below the soil surface. Corn that was planted 10 cm from the fertilized row showed greater early season growth, higher plant population, and grain yield. Planting 20 and 38 cm from the center of the fertilized rows showed none of the benefits that are typically associated with strip-tillage system. Enough time should be allowed between the strip-till operation and planting to reach satisfactory soil conditions (e.g., moist and firm seedbed). Our results suggest that the best location for planting strip-tilled fertilized corn vary depending on soil and climatic conditions as well as the time between fertilizer application with the strip-till operation and planting. With fewer number of days, planting directly on the center of fertilized strip-till resulted in decreased plant population and lower grain yield. However, the greatest yield benefit across different planting conditions was attained when planting within 10 cm of the strip. PMID:27588024

  11. STS-44 crewmembers exercise using treadmill rowing device on OV-104's middeck

    NASA Technical Reports Server (NTRS)

    1991-01-01

    STS-44 Pilot Terence T. Henricks (foreground) 'rows' on the modified treadmill device used by crewmembers for biomedical evaluations and for exercising. Earlier, the treadmill, located on the middeck of Atlantis, Orbiter Vehicle (OV) 104, had experienced an anomaly that affected its ability to support the subjects in 'running' mode. Mission Specialist (MS) Mario Runco, Jr (background), his torso bearing sensors, awaits his turn on the treadmill.

  12. Disenfranchised grief and nonfinite loss as experienced by the families of death row inmates.

    PubMed

    Jones, Sandra J; Beck, Elizabeth

    The families of death row inmates experience grief and loss issues that have been neglected by scholars and clinicians alike. The issues found in this population are unique and require our understanding. The present study uses the concepts of disenfranchised grief and nonfinite loss to uncover the pain experienced by the children and other family members who have a loved one on death row. Kenneth Doka's (1989) concept of disenfranchised grief is utilized to bring attention to the ways in which the circumstances surrounding an execution leave the family members of those condemned to death outside of the "grieving rules" that exist in the United States. Family members are disenfranchised from their grief, as society does not socially validate their pain. The loss that they feel is also nonfinite (Bruce & Schultz, 2001) in that it is continuous and denies the families all of the hopes, dreams, and expectations that they had for their loved one who now sits on death row. The qualitative interview method was utilized by the authors of this study to gather data from 26 family members of death row inmates who are incarcerated along the East Coast of the United States. The reactions of this group of family members are varied and complex, yet they include the following common responses: social isolation due to stigma and their own feelings of criminalization, intensified family conflict between family members who grieve differently from one another, diminished self-esteem, shame, diffused and specific feelings of guilt, and a chronic state of despair. This study explores virtually untapped terrain. An examination of the microlevel effects of the death penalty on families provides insight in to the area of death and dying, especially as it is related to disenfranchised loss and nonfinite grief. In addition, this study provides insight into the death penalty and its effects. PMID:18186424

  13. CFD Simulations of Supersonic Highly Swirling Flow Exiting a Turbine Vane Row Compared with Experimental Observations

    NASA Technical Reports Server (NTRS)

    West, Jeff S.; Richardson, Brian R.; Schmauch, Preston; Kenny, Robert J.

    2011-01-01

    Marshall Space Flight Center (MSFC) has been heavily involved in developing the J2-X engine. The Center has been testing a Work Horse Gas Generator (WHGG) to supply gas products to J2-X turbine components at realistic flight-like operating conditions. Three-dimensional time accurate CFD simulations and analytical fluid analysis have been performed to support WHGG tests at MSFC. The general purpose CFD program LOCI/Chem was utilized to simulate flow of products from the WHGG through a turbine manifold, a stationary row of turbine vanes, into a Can and orifice assembly used to control the back pressure at the turbine vane row and finally through an aspirator plate and flame bucket. Simulations showed that supersonic swirling flow downstream of the turbine imparted a much higher pressure on the Can wall than expected for a non-swirling flow. This result was verified by developing an analytical model that predicts wall pressure due to swirling flow. The CFD simulations predicted that the higher downstream pressure would cause the pressure drop across the nozzle row to be approximately half the value of the test objective. With CFD support, a redesign of the Can orifice and aspirator plate was performed. WHGG experimental results and observations compared well with pre-test and post-test CFD simulations. CFD simulations for both quasi-static and transient test conditions correctly predicted the pressure environment downstream of the turbine row and the behavior of the gas generator product plume as it exited the WHGG test article, impacted the flame bucket and interacted with the external environment.

  14. Impacts of Tree Rows on Grassland Birds and Potential Nest Predators: A Removal Experiment

    PubMed Central

    Ellison, Kevin S.; Ribic, Christine A.; Sample, David W.; Fawcett, Megan J.; Dadisman, John D.

    2013-01-01

    Globally, grasslands and the wildlife that inhabit them are widely imperiled. Encroachment by shrubs and trees has widely impacted grasslands in the past 150 years. In North America, most grassland birds avoid nesting near woody vegetation. Because woody vegetation fragments grasslands and potential nest predator diversity and abundance is often greater along wooded edge and grassland transitions, we measured the impacts of removing rows of trees and shrubs that intersected grasslands on potential nest predators and the three most abundant grassland bird species (Henslow’s sparrow [Ammodramus henslowii], Eastern meadowlark [Sturnella magna], and bobolink [Dolichonyx oryzivorus]) at sites in Wisconsin, U.S.A. We monitored 3 control and 3 treatment sites, for 1 yr prior to and 3 yr after tree row removal at the treatment sites. Grassland bird densities increased (2–4 times for bobolink and Henslow’s sparrow) and nesting densities increased (all 3 species) in the removal areas compared to control areas. After removals, Henslow’s sparrows nested within ≤50 m of the treatment area, where they did not occur when tree rows were present. Most dramatically, activity by woodland-associated predators nearly ceased (nine-fold decrease for raccoon [Procyon lotor]) at the removals and grassland predators increased (up to 27 times activity for thirteen-lined ground squirrel [Ictidomys tridecemlineatus]). Nest success did not increase, likely reflecting the increase in grassland predators. However, more nests were attempted by all 3 species (175 versus 116) and the number of successful nests for bobolinks and Henslow’s sparrows increased. Because of gains in habitat, increased use by birds, greater production of young, and the effective removal of woodland-associated predators, tree row removal, where appropriate based on the predator community, can be a beneficial management action for conserving grassland birds and improving fragmented and degraded grassland

  15. Disenfranchised grief and nonfinite loss as experienced by the families of death row inmates.

    PubMed

    Jones, Sandra J; Beck, Elizabeth

    The families of death row inmates experience grief and loss issues that have been neglected by scholars and clinicians alike. The issues found in this population are unique and require our understanding. The present study uses the concepts of disenfranchised grief and nonfinite loss to uncover the pain experienced by the children and other family members who have a loved one on death row. Kenneth Doka's (1989) concept of disenfranchised grief is utilized to bring attention to the ways in which the circumstances surrounding an execution leave the family members of those condemned to death outside of the "grieving rules" that exist in the United States. Family members are disenfranchised from their grief, as society does not socially validate their pain. The loss that they feel is also nonfinite (Bruce & Schultz, 2001) in that it is continuous and denies the families all of the hopes, dreams, and expectations that they had for their loved one who now sits on death row. The qualitative interview method was utilized by the authors of this study to gather data from 26 family members of death row inmates who are incarcerated along the East Coast of the United States. The reactions of this group of family members are varied and complex, yet they include the following common responses: social isolation due to stigma and their own feelings of criminalization, intensified family conflict between family members who grieve differently from one another, diminished self-esteem, shame, diffused and specific feelings of guilt, and a chronic state of despair. This study explores virtually untapped terrain. An examination of the microlevel effects of the death penalty on families provides insight in to the area of death and dying, especially as it is related to disenfranchised loss and nonfinite grief. In addition, this study provides insight into the death penalty and its effects.

  16. Arthroscopic Knotless, Double-Row, Extended Linked Repair for Massive Rotator Cuff Tears.

    PubMed

    Greenspoon, Joshua A; Petri, Maximilian; Millett, Peter J

    2016-02-01

    The management of massive rotator cuff tears remains a challenge for physicians, with failure rates being higher when compared with smaller tears. Many surgical treatment options exist including debridement with biceps tenodesis, complete repair, partial repair, repair with augmentation devices, superior capsule reconstruction, tendon transfer, and reverse total shoulder arthroplasty. The purpose of this article is to describe our preferred surgical technique for a complete arthroscopic repair using an extended linked, knotless, double-row construct. PMID:27330944

  17. Simulations of SAR wave spectra using high spectral resolution estimates from the SCR and ROWS instruments

    NASA Technical Reports Server (NTRS)

    Lyzenga, D.

    1985-01-01

    A numerical model for predicting the synthetic aperture radar (SAR) image of a moving ocean surface is described, and results are presented for two SIR-B data sets collected off the coast of Chile. Wave height spectra measured by the NASA radar ocean wave spectrometer (ROWS) and surface contour radar (SCR) were used as inputs to this model, and results are compared with actual SIR-B image spectra from orbits 91 and 106.

  18. Impacts of tree rows on grassland birds & potential nest predators: A removal experiment

    USGS Publications Warehouse

    Ellison, Kevin S.; Ribic, Christine; Sample, David W.; Fawcett, Megan J.; Dadisman, John D.

    2013-01-01

    Globally, grasslands and the wildlife that inhabit them are widely imperiled. Encroachment by shrubs and trees has widely impacted grasslands in the past 150 years. In North America, most grassland birds avoid nesting near woody vegetation. Because woody vegetation fragments grasslands and potential nest predator diversity and abundance is often greater along wooded edge and grassland transitions, we measured the impacts of removing rows of trees and shrubs that intersected grasslands on potential nest predators and the three most abundant grassland bird species (Henslow’s sparrow [Ammodramus henslowii], Eastern meadowlark [Sturnella magna], and bobolink [Dolichonyx oryzivorus]) at sites in Wisconsin, U.S.A. We monitored 3 control and 3 treatment sites, for 1 yr prior to and 3 yr after tree row removal at the treatment sites. Grassland bird densities increased (2–4 times for bobolink and Henslow’s sparrow) and nesting densities increased (all 3 species) in the removal areas compared to control areas. After removals, Henslow’s sparrows nested within ≤50 m of the treatment area, where they did not occur when tree rows were present. Most dramatically, activity by woodland-associated predators nearly ceased (nine-fold decrease for raccoon [Procyon lotor]) at the removals and grassland predators increased (up to 27 times activity for thirteen-lined ground squirrel [Ictidomys tridecemlineatus]). Nest success did not increase, likely reflecting the increase in grassland predators. However, more nests were attempted by all 3 species (175 versus 116) and the number of successful nests for bobolinks and Henslow’s sparrows increased. Because of gains in habitat, increased use by birds, greater production of young, and the effective removal of woodland-associated predators, tree row removal, where appropriate based on the predator community, can be a beneficial management action for conserving grassland birds and improving fragmented and degraded grassland

  19. Cardiac cone-beam CT

    SciTech Connect

    Manzke, Robert . E-mail: robert.manzke@philips.com

    2005-10-15

    This doctoral thesis addresses imaging of the heart with retrospectively gated helical cone-beam computed tomography (CT). A thorough review of the CT reconstruction literature is presented in combination with a historic overview of cardiac CT imaging and a brief introduction to other cardiac imaging modalities. The thesis includes a comprehensive chapter about the theory of CT reconstruction, familiarizing the reader with the problem of cone-beam reconstruction. The anatomic and dynamic properties of the heart are outlined and techniques to derive the gating information are reviewed. With the extended cardiac reconstruction (ECR) framework, a new approach is presented for the heart-rate-adaptive gated helical cardiac cone-beam CT reconstruction. Reconstruction assessment criteria such as the temporal resolution, the homogeneity in terms of the cardiac phase, and the smoothness at cycle-to-cycle transitions are developed. Several reconstruction optimization approaches are described: An approach for the heart-rate-adaptive optimization of the temporal resolution is presented. Streak artifacts at cycle-to-cycle transitions can be minimized by using an improved cardiac weighting scheme. The optimal quiescent cardiac phase for the reconstruction can be determined automatically with the motion map technique. Results for all optimization procedures applied to ECR are presented and discussed based on patient and phantom data. The ECR algorithm is analyzed for larger detector arrays of future cone-beam systems throughout an extensive simulation study based on a four-dimensional cardiac CT phantom. The results of the scientific work are summarized and an outlook proposing future directions is given. The presented thesis is available for public download at www.cardiac-ct.net.

  20. Dual-row needle arrays under an electromagnetic thermotherapy system for bloodless liver resection surgery.

    PubMed

    Huang, Sheng Chieh; Chang, Yi Yuan; Chao, Ying Jui; Shan, Yan Shen; Lin, Xi Zhang; Lee, Gwo Bin

    2012-03-01

    Electromagnetic thermotherapy has been extensively investigated recently and may become a new surgical modality for a variety of medical applications. It applies a high-frequency alternating magnetic field to heat up magnetic materials inserted within the human body to generate tissue coagulation or cell apoptosis. Using a new procedure with dual-row needle arrays under an electromagnetic thermotherapy system with a feedback temperature control system, this study demonstrates bloodless porcine liver resection, which is challenging using existing methods. In vitro experiments showed that hollowed, stainless-steel needles could be heated up to more than 300 °C within 30 s when centered under the induction coils of the electromagnetic thermotherapy system. In order to generate a wide ablation zone and to prevent the dual-row needle arrays from sticking to the tissue after heating, a constant temperature of 120 °C was applied using a specific treatment protocol. The temperature distribution in the porcine livers was also measured to explore the effective coagulation area. Liver resection was then performed in Lan-Yu pigs. Experimental results showed that seven pigs underwent liver resection without bleeding during surgery and no complications afterward. The dual-row needle arrays combined with the electromagnetic thermotherapy system are thus shown to be promising for bloodless tissue resection.

  1. 3D vector flow using a row-column addressed CMUT array

    NASA Astrophysics Data System (ADS)

    Holbek, Simon; Christiansen, Thomas Lehrmann; Engholm, Mathias; Lei, Anders; Stuart, Mathias Bo; Beers, Christopher; Moesner, Lars Nordahl; Bagge, Jan Peter; Thomsen, Erik Vilain; Jensen, Jørgen Arendt

    2016-04-01

    This paper presents an in-house developed 2-D capacitive micromachined ultrasonic transducer (CMUT) applied for 3-D blood flow estimation. The probe breaks with conventional transducers in two ways; first, the ultrasonic pressure field is generated from thousands of small vibrating micromachined cells, and second, elements are accessed by row and/or column indices. The 62+62 2-D row-column addressed prototype CMUT probe was used for vector flow estimation by transmitting focused ultrasound into a flow-rig with a fully developed parabolic flow. The beam-to-flow angle was 90°. The received data was beamformed and processed offline. A transverse oscillation (TO) velocity estimator was used to estimate the 3-D vector flow along a line originating from the center of the transducer. The estimated velocities in the lateral and axial direction were close to zero as expected. In the transverse direction a characteristic parabolic velocity profile was estimated with a peak velocity of 0.48 m/s +/- 0.02 m/s in reference to the expected 0.54 m/s. The results presented are the first 3-D vector flow estimates obtained with a row-column CMUT probe, which demonstrates that the CMUT technology is feasible for 3-D flow estimation.

  2. The cochlear amplifier as a standing wave: ``Squirting'' waves between rows of outer hair cells?

    NASA Astrophysics Data System (ADS)

    Bell, Andrew; Fletcher, Neville H.

    2004-08-01

    This paper draws attention to symmetric Lloyd-Redwood (SLR) waves-known in ultrasonics as ``squirting'' waves-and points out that their distinctive properties make them well-suited for carrying positive feedback between rows of outer hair cells. This could result in standing-wave resonance-in essence a narrow-band cochlear amplifier. Based on known physical properties of the cochlea, such an amplifier can be readily tuned to match the full 10-octave range of human hearing. SLR waves propagate in a thin liquid layer enclosed between two thin compliant plates or a single such plate and a rigid wall, conditions found in the subtectorial space of the cochlea, and rely on the mass of the inter-plate fluid interacting with the stiffness of the plates to provide low phase velocity and high dispersion. The first property means SLR wavelengths can be as short as the distance between rows of outer hair cells, allowing standing wave formation; the second permits wide-range tuning using only an order-of-magnitude variation in cochlear physical properties, most importantly the inter-row spacing. Viscous drag at the two surfaces potentially limits SLR wave propagation at low frequencies, but this can perhaps be overcome by invoking hydrophobic effects.

  3. Dual-row needle arrays under an electromagnetic thermotherapy system for bloodless liver resection surgery.

    PubMed

    Huang, Sheng Chieh; Chang, Yi Yuan; Chao, Ying Jui; Shan, Yan Shen; Lin, Xi Zhang; Lee, Gwo Bin

    2012-03-01

    Electromagnetic thermotherapy has been extensively investigated recently and may become a new surgical modality for a variety of medical applications. It applies a high-frequency alternating magnetic field to heat up magnetic materials inserted within the human body to generate tissue coagulation or cell apoptosis. Using a new procedure with dual-row needle arrays under an electromagnetic thermotherapy system with a feedback temperature control system, this study demonstrates bloodless porcine liver resection, which is challenging using existing methods. In vitro experiments showed that hollowed, stainless-steel needles could be heated up to more than 300 °C within 30 s when centered under the induction coils of the electromagnetic thermotherapy system. In order to generate a wide ablation zone and to prevent the dual-row needle arrays from sticking to the tissue after heating, a constant temperature of 120 °C was applied using a specific treatment protocol. The temperature distribution in the porcine livers was also measured to explore the effective coagulation area. Liver resection was then performed in Lan-Yu pigs. Experimental results showed that seven pigs underwent liver resection without bleeding during surgery and no complications afterward. The dual-row needle arrays combined with the electromagnetic thermotherapy system are thus shown to be promising for bloodless tissue resection. PMID:22194233

  4. Crop Row Detection in Maize Fields Inspired on the Human Visual Perception

    PubMed Central

    Romeo, J.; Pajares, G.; Montalvo, M.; Guerrero, J. M.; Guijarro, M.; Ribeiro, A.

    2012-01-01

    This paper proposes a new method, oriented to image real-time processing, for identifying crop rows in maize fields in the images. The vision system is designed to be installed onboard a mobile agricultural vehicle, that is, submitted to gyros, vibrations, and undesired movements. The images are captured under image perspective, being affected by the above undesired effects. The image processing consists of two main processes: image segmentation and crop row detection. The first one applies a threshold to separate green plants or pixels (crops and weeds) from the rest (soil, stones, and others). It is based on a fuzzy clustering process, which allows obtaining the threshold to be applied during the normal operation process. The crop row detection applies a method based on image perspective projection that searches for maximum accumulation of segmented green pixels along straight alignments. They determine the expected crop lines in the images. The method is robust enough to work under the above-mentioned undesired effects. It is favorably compared against the well-tested Hough transformation for line detection. PMID:22623899

  5. A CFD analysis of blade row interactions within a high-speed axial compressor

    NASA Astrophysics Data System (ADS)

    Richman, Michael Scott

    Aircraft engine design provides many technical and financial hurdles. In an effort to streamline the design process, save money, and improve reliability and performance, many manufacturers are relying on computational fluid dynamic simulations. An overarching goal of the design process for military aircraft engines is to reduce size and weight while maintaining (or improving) reliability. Designers often turn to the compression system to accomplish this goal. As pressure ratios increase and the number of compression stages decrease, many problems arise, for example stability and high cycle fatigue (HCF) become significant as individual stage loading is increased. CFD simulations have recently been employed to assist in the understanding of the aeroelastic problems. For accurate multistage blade row HCF prediction, it is imperative that advanced three-dimensional blade row unsteady aerodynamic interaction codes be validated with appropriate benchmark data. This research addresses this required validation process for TURBO, an advanced three-dimensional multi-blade row turbomachinery CFD code. The solution/prediction accuracy is characterized, identifying key flow field parameters driving the inlet guide vane (IGV) and stator response to the rotor generated forcing functions. The result is a quantified evaluation of the ability of TURBO to predict not only the fundamental flow field characteristics but the three dimensional blade loading.

  6. Crop row detection in maize fields inspired on the human visual perception.

    PubMed

    Romeo, J; Pajares, G; Montalvo, M; Guerrero, J M; Guijarro, M; Ribeiro, A

    2012-01-01

    This paper proposes a new method, oriented to image real-time processing, for identifying crop rows in maize fields in the images. The vision system is designed to be installed onboard a mobile agricultural vehicle, that is, submitted to gyros, vibrations, and undesired movements. The images are captured under image perspective, being affected by the above undesired effects. The image processing consists of two main processes: image segmentation and crop row detection. The first one applies a threshold to separate green plants or pixels (crops and weeds) from the rest (soil, stones, and others). It is based on a fuzzy clustering process, which allows obtaining the threshold to be applied during the normal operation process. The crop row detection applies a method based on image perspective projection that searches for maximum accumulation of segmented green pixels along straight alignments. They determine the expected crop lines in the images. The method is robust enough to work under the above-mentioned undesired effects. It is favorably compared against the well-tested Hough transformation for line detection.

  7. First-Principles Equation of State Calculations of First- and Second-Row Plasmas

    NASA Astrophysics Data System (ADS)

    Driver, K. P.; Soubiran, F.; Zhang, S.; Militzer, B.

    2015-12-01

    Theoretical studies of high energy density matter are a key component to improving our knowledge related to interiors of giant planets and stars, astrophysical processes, and new plasma energy technologies, such as inertial confined fusion. Path integral Monte Carlo (PIMC) and density functional theory molecular dynamics (DFT-MD) are simulation methods that provide consistent, first-principles descriptions of warm, dense matter and plasmas over a wide range of density and temperature conditions. Here, we report simulation results using these two methods for a number of first- and second-row elements. DFT-MD algorithms are well-suited for low temperatures, while PIMC has been restricted to relatively high temperatures due to the free-particle approximation of the nodal surface. For first-row elements, we find that the free-particle approximation is sufficient as long as the temperature is high enough to sufficiently ionize the second electronic shell of the atoms. For heavier, second-row elements, we have developed a new, localized nodal surface, which allows us to treat bound states within the PIMC formalism. By combining PIMC and DFT-MD pressures and internal energies, we produce a coherent, first-principles equation of state, bridging the entire warm dense matter regime. Pair-correlation functions and the density of electronic states reveal an evolving plasma structure. The degree of ionization is affected by both temperature and density. Finally, shock Hugoniot curves show an increase in compression as the first and second shells are ionized.

  8. Topology of mRNA chain in isolated eukaryotic double-row polyribosomes.

    PubMed

    Afonina, Zh A; Myasnikov, A G; Khabibullina, N F; Belorusova, A Yu; Menetret, J-F; Vasiliev, V D; Klaholz, B P; Shirokov, V A; Spirin, A S

    2013-05-01

    In the process of protein synthesis, the translating ribosomes of eukaryotic cells form polyribosomes that are found to be multiplex functional complexes possessing elements of ordered spatial organization. As revealed by a number of electron microscopy studies, the predominant visible configurations of the eukaryotic polyribosomes are circles (circular polyribosomes) and two-stranded formations (so-called double-row polyribosomes). The "long" (i.e. heavy loaded) polyribosomes are usually represented by double-row structures, which can be interpreted as either topologically circular ("collapsed rings"), or topologically linear (zigzags or helices). In the present work we have analyzed the mRNA path within the eukaryotic polyribosomes, isolated from a wheat germ cell-free translation system, by integrating two approaches: the visualization of mRNA ends in polyribosomes by marking them with gold nanoparticles (3'-end) and initiating 40S subunits (5'-end), as well as by the cryoelectron tomography. Examination of the location of the mRNA markers in polyribosomes and mutual orientation of ribosomes in them has shown that the double-row polyribosomes of the same sample can have both circular and linear arrangements of their mRNA.

  9. A Spreadsheet for the Mixing of a Row of Jets with a Confined Crossflow. Supplement

    NASA Technical Reports Server (NTRS)

    Holderman, J. D.; Smith, T. D.; Clisset, J. R.; Lear, W. E.

    2005-01-01

    An interactive computer code, written with a readily available software program, Microsoft Excel (Microsoft Corporation, Redmond, WA) is presented which displays 3 D oblique plots of a conserved scalar distribution downstream of jets mixing with a confined crossflow, for a single row, double rows, or opposed rows of jets with or without flow area convergence and/or a non-uniform crossflow scalar distribution. This project used a previously developed empirical model of jets mixing in a confined crossflow to create an Microsoft Excel spreadsheet that can output the profiles of a conserved scalar for jets injected into a confined crossflow given several input variables. The program uses multiple spreadsheets in a single Microsoft Excel notebook to carry out the modeling. The first sheet contains the main program, controls for the type of problem to be solved, and convergence criteria. The first sheet also provides for input of the specific geometry and flow conditions. The second sheet presents the results calculated with this routine to show the effects on the mixing of varying flow and geometric parameters. Comparisons are also made between results from the version of the empirical correlations implemented in the spreadsheet and the versions originally written in Applesoft BASIC (Apple Computer, Cupertino, CA) in the 1980's.

  10. A Spreadsheet for the Mixing of a Row of Jets with a Confined Crossflow

    NASA Technical Reports Server (NTRS)

    Holderman, J. D.; Smith, T. D.; Clisset, J. R.; Lear, W. E.

    2005-01-01

    An interactive computer code, written with a readily available software program, Microsoft Excel (Microsoft Corporation, Redmond, WA) is presented which displays 3 D oblique plots of a conserved scalar distribution downstream of jets mixing with a confined crossflow, for a single row, double rows, or opposed rows of jets with or without flow area convergence and/or a non-uniform crossflow scalar distribution. This project used a previously developed empirical model of jets mixing in a confined crossflow to create an Microsoft Excel spreadsheet that can output the profiles of a conserved scalar for jets injected into a confined crossflow given several input variables. The program uses multiple spreadsheets in a single Microsoft Excel notebook to carry out the modeling. The first sheet contains the main program, controls for the type of problem to be solved, and convergence criteria. The first sheet also provides for input of the specific geometry and flow conditions. The second sheet presents the results calculated with this routine to show the effects on the mixing of varying flow and geometric parameters. Comparisons are also made between results from the version of the empirical correlations implemented in the spreadsheet and the versions originally written in Applesoft BASIC (Apple Computer, Cupertino, CA) in the 1980's.

  11. Development of a Linearized Unsteady Euler Analysis with Application to Wake/Blade-Row Interactions

    NASA Technical Reports Server (NTRS)

    Verdon, Joseph M.; Montgomery, Matthew D.; Chuang, H. Andrew

    1999-01-01

    A three-dimensional, linearized, Euler analysis is being developed to provide a comprehensive and efficient unsteady aerodynamic analysis for predicting the aeroacoustic and aeroelastic responses of axial-flow turbomachinery blading. The mathematical models needed to describe nonlinear and linearized, inviscid, unsteady flows through a blade row operating within a cylindrical annular duct are presented in this report. A numerical model for linearized inviscid unsteady flows, which couples a near-field, implicit, wave-split, finite volume analysis to far-field eigen analyses, is also described. The linearized aerodynamic and numerical models have been implemented into the three-dimensional unsteady flow code, LINFLUX. This code is applied herein to predict unsteady subsonic flows driven by wake or vortical excitations. The intent is to validate the LINFLUX analysis via numerical results for simple benchmark unsteady flows and to demonstrate this analysis via application to a realistic wake/blade-row interaction. Detailed numerical results for a three-dimensional version of the 10th Standard Cascade and a fan exit guide vane indicate that LINFLUX is becoming a reliable and useful unsteady aerodynamic prediction capability that can be applied, in the future, to assess the three-dimensional flow physics important to blade-row, aeroacoustic and aeroelastic responses.

  12. DisClose: Discovering Colossal Closed Itemsets via a Memory Efficient Compact Row-Tree

    SciTech Connect

    Zulkurnain, Nurul F.; Keane, John A.; Haglin, David J.

    2013-02-01

    Itemset mining has recently focused on discovery of frequent itemsets from high-dimensional datasets with relatively few rows and a larger number of items. With exponentially in-creasing running time as average row length increases, mining such datasets renders most conventional algorithms impracti-cal. Unfortunately, large cardinality closed itemsets are likely to be more informative than small cardinality closed itemsets in this type of dataset. This paper proposes an approach, called DisClose, to extract large cardinality (colossal) closed itemsets from high-dimensional datasets. The approach relies on a memory-efficient Compact Row-Tree data structure to represent itemsets during the search process. The search strategy explores the transposed representation of the dataset. Large cardinality itemsets are enumerated first followed by smaller ones. In addition, we utilize a minimum cardinality threshold to further reduce the search space. Experimental result shows that DisClose can complete the extraction of colossal closed itemsets in the considered dataset, even for low support thresholds. The algorithm immediately discovers closed itemsets without needing to check if each new closed itemset has previously been found.

  13. Maximal strength on different resistance training rowing exercises predicts start phase performance in elite kayakers.

    PubMed

    Ualí, Ismael; Herrero, Azael J; Garatachea, Nuria; Marín, Pedro J; Alvear-Ordenes, Ildefonso; García-López, David

    2012-04-01

    This study aimed to examine the relationship existing between maximum strength values in 2 common resistance training row exercises (bilateral bench pull [BBP] and one-arm cable row [OACR]) and short sprint performance in elite kayakers. Ten junior kayakers (5 women and 5 men) were tested on different days for 1 repetition maximum (1RM) and maximal voluntary isometric contraction in both exercises. Moreover, a 12-m sprint kayak was performed in a dew pond to record split times (2, 5, and 10 m), peak velocity, distance completed considering the first 8 strokes, and mean acceleration induced by right blade and left blade strokes. No differences (p > 0.05) were observed when right and left arms were compared in sprint testing or strength testing variables. Maximal strength values in BBP and OACR were significantly correlated with short sprint performance variables, showing the bilateral exercise with slightly stronger correlation coefficients than the unilateral seated row. Moreover, the relationship between strength testing and sprint testing variables is stronger when maximal force is measured through a dynamic approach (1RM) in comparison with an isometric approach. In conclusion, maximal strength in BBP and OACR is a good predictor of the start phase performance in elite sprint kayakers, mainly the 1RM value in BBP.

  14. Computational fluid dynamics simulation of sound propagation through a blade row.

    PubMed

    Zhao, Lei; Qiao, Weiyang; Ji, Liang

    2012-10-01

    The propagation of sound waves through a blade row is investigated numerically. A wave splitting method in a two-dimensional duct with arbitrary mean flow is presented, based on which pressure amplitude of different wave mode can be extracted at an axial plane. The propagation of sound wave through a flat plate blade row has been simulated by solving the unsteady Reynolds average Navier-Stokes equations (URANS). The transmission and reflection coefficients obtained by Computational Fluid Dynamics (CFD) are compared with semi-analytical results. It indicates that the low order URANS scheme will cause large errors if the sound pressure level is lower than -100 dB (with as reference pressure the product of density, main flow velocity, and speed of sound). The CFD code has sufficient precision when solving the interaction of sound wave and blade row providing the boundary reflections have no substantial influence. Finally, the effects of flow Mach number, blade thickness, and blade turning angle on sound propagation are studied.

  15. Children of the condemned: grieving the loss of a father to death row.

    PubMed

    Beck, Elizabeth; Jones, Sandra J

    This article explores the effects of a death sentence and execution on the children of the accused. Insight into the unique bereavement of this population is provided, while contributing to the literature on death and dying. The experience of losing a father to death row and eventual execution is compared to the wider population of children with incarcerated parents and it is determined that children of death row inmates contend with a much more complicated grief process, one that has gone largely unstudied. This article contains a brief discussion of disenfranchised grief and nonfinite loss, two theories that, we argue, shape the children's grief process. The results section of the article uses qualitative data gathered from 19 children to explore the role that nonfinite loss and disenfranchised grief share in the nature of their bereavement. Our discussion focuses on the impact of stigma and violence on the grieving process. Following a discussion of the unique challenges confronting the children of death row inmates is a discussion of the implications that their experience has for practice.

  16. Building generalized inverses of matrices using only row and column operations

    NASA Astrophysics Data System (ADS)

    Stuart, Jeffrey

    2010-12-01

    Most students complete their first and only course in linear algebra with the understanding that a real, square matrix A has an inverse if and only if rref(A), the reduced row echelon form of A, is the identity matrix I n . That is, if they apply elementary row operations via the Gauss-Jordan algorithm to the partitioned matrix [A | I n ] to obtain [rref(A) | P], then the matrix A is invertible exactly when rref(A) = I n , in which case, P = A -1. Many students must wonder what happens when A is not invertible, and what information P conveys in that case. That question is, however, seldom answered in a first course. We show that investigating that question emphasizes the close relationships between matrix multiplication, elementary row operations, linear systems, and the four fundamental spaces associated with a matrix. More important, answering that question provides an opportunity to show students how mathematicians extend results by relaxing hypotheses and then exploring the strengths and limitations of the resulting generalization, and how the first relaxation found is often not the best relaxation to be found. Along the way, we introduce students to the basic properties of generalized inverses. Finally, our approach should fit within the time and topic constraints of a first course in linear algebra.

  17. Adjoint Optimization of Multistage Axial Compressor Blades with Static Pressure Constraint at Blade Row Interface

    NASA Astrophysics Data System (ADS)

    Yu, Jia; Ji, Lucheng; Li, Weiwei; Yi, Weilin

    2016-06-01

    Adjoint method is an important tool for design refinement of multistage compressors. However, the radial static pressure distribution deviates during the optimization procedure and deteriorates the overall performance, producing final designs that are not well suited for realistic engineering applications. In previous development work on multistage turbomachinery blade optimization using adjoint method and thin shear-layer N-S equations, the entropy production is selected as the objective function with given mass flow rate and total pressure ratio as imposed constraints. The radial static pressure distribution at the interfaces between rows is introduced as a new constraint in the present paper. The approach is applied to the redesign of a five-stage axial compressor, and the results obtained with and without the constraint on the radial static pressure distribution at the interfaces between rows are discussed in detail. The results show that the redesign without the radial static pressure distribution constraint (RSPDC) gives an optimal solution that shows deviations on radial static pressure distribution, especially at rotor exit tip region. On the other hand, the redesign with the RSPDC successfully keeps the radial static pressure distribution at the interfaces between rows and make sure that the optimization results are applicable in a practical engineering design.

  18. Self-organization of S adatoms on Au(111): √3R30° rows at low coverage

    SciTech Connect

    Walen, Holly; Liu, Da-Jiang; Oh, Junepyo; Lim, Hyunseob; Kim, Yousoo; Evans, J. W.; Thiel, P. A.

    2015-07-07

    Using scanning tunneling microscopy, we observe an adlayer structure that is dominated by short rows of S atoms, on unreconstructed regions of a Au(111) surface. This structure forms upon adsorption of low S coverage (less than 0.1 monolayer) on a fully reconstructed clean surface at 300 K, then cooling to 5 K for observation. The rows adopt one of three orientations that are rotated by 30° from the close-packed directions of the Au(111) substrate, and adjacent S atoms in the rows are separated by √3 times the surface lattice constant, a. Monte Carlo simulations are performed on lattice-gas models, derived using a limited cluster expansion based on density functional theory energetics. Models which include long-range pairwise interactions (extending to 5a), plus selected trio interactions, successfully reproduce the linear rows of S atoms at reasonable temperatures.

  19. Self-organization of S adatoms on Au(111): √3R30° rows at low coverage

    DOE PAGES

    Walen, Holly; Liu, Da -Jiang; Oh, Junepyo; Lim, Hyunseob; Evans, J. W.; Kim, Yousoo; Thiel, P. A.

    2015-07-06

    Using scanning tunneling microscopy, we observe an adlayer structure that is dominated by short rows of S atoms, on unreconstructed regions of a Au(111) surface. This structure forms upon adsorption of low S coverage (less than 0.1 monolayer) on a fully reconstructed cleansurface at 300 K, then cooling to 5 K for observation. The rows adopt one of three orientations that are rotated by 30° from the close-packed directions of the Au(111) substrate, and adjacent S atoms in the rows are separated by √3 times the surface lattice constant, a. Monte Carlo simulations are performed on lattice-gas models, we derivedmore » using a limited cluster expansion based on density functional theory energetics. Furthermore, models which include long-range pairwise interactions (extending to 5a), plus selected trio interactions, successfully reproduce the linear rows of S atoms at reasonable temperatures.« less

  20. A mathematical constraint placed upon inter-blade row boundary conditions used in the simulation of multistage turbomachinery flows

    NASA Technical Reports Server (NTRS)

    Adamczyk, J. J.

    1992-01-01

    A number of researchers have suggested using an inter-blade row boundary condition to extend isolated blade row flow solvers to multiple blade row configurations. This suggestion is worth consideration for it appears to result in codes that are computationally more efficient than those based on other schemes that were suggested to accomplish the same task. The work is concerned with the development of a mathematical constraint which this boundary condition must satisfy to insure the proper transfer of momentum and vorticity across the plane. Using experimental data, the work quantifies the error in the time-averaged vorticity field which results from simply requiring continuity across the boundary plane of the momentum based on the time-averaged velocity fields associated with a multiple blade row configuration.

  1. Self-organization of S adatoms on Au(111): √3R30° rows at low coverage

    SciTech Connect

    Walen, Holly; Liu, Da -Jiang; Oh, Junepyo; Lim, Hyunseob; Evans, J. W.; Kim, Yousoo; Thiel, P. A.

    2015-07-06

    Using scanning tunneling microscopy, we observe an adlayer structure that is dominated by short rows of S atoms, on unreconstructed regions of a Au(111) surface. This structure forms upon adsorption of low S coverage (less than 0.1 monolayer) on a fully reconstructed cleansurface at 300 K, then cooling to 5 K for observation. The rows adopt one of three orientations that are rotated by 30° from the close-packed directions of the Au(111) substrate, and adjacent S atoms in the rows are separated by √3 times the surface lattice constant, a. Monte Carlo simulations are performed on lattice-gas models, we derived using a limited cluster expansion based on density functional theory energetics. Furthermore, models which include long-range pairwise interactions (extending to 5a), plus selected trio interactions, successfully reproduce the linear rows of S atoms at reasonable temperatures.

  2. New horizons in cardiac CT.

    PubMed

    den Harder, A M; Willemink, M J; de Jong, P A; Schilham, A M R; Rajiah, P; Takx, R A P; Leiner, T

    2016-08-01

    Until recently, cardiovascular computed tomography angiography (CCTA) was associated with considerable radiation doses. The introduction of tube current modulation and automatic tube potential selection as well as high-pitch prospective ECG-triggering and iterative reconstruction offer the ability to decrease dose with approximately one order of magnitude, often to sub-millisievert dose levels. In parallel, advancements in computational technology have enabled the measurement of fractional flow reserve (FFR) from CCTA data (FFRCT). This technique shows potential to replace invasively measured FFR to select patients in need of coronary intervention. Furthermore, developments in scanner hardware have led to the introduction of dual-energy and photon-counting CT, which offer the possibility of material decomposition imaging. Dual-energy CT reduces beam hardening, which enables CCTA in patients with a high calcium burden and more robust myocardial CT perfusion imaging. Future-generation CT systems will be capable of counting individual X-ray photons. Photon-counting CT is promising and may result in a substantial further radiation dose reduction, vastly increased spatial resolution, and the introduction of a whole new class of contrast agents. PMID:26932775

  3. Double row loop-coil configuration for high-speed electrodynamic maglev suspension, guidance, propulsion and guideway directional switching

    SciTech Connect

    He, J.; Rote, D.M.

    1994-12-31

    A stabilization and propulsion system comprising a series of loop-coils arranged in parallel rows wherein two rows form a magnetic rail. Levitation and lateral stability is provided when the induced field in the magnetic rails interacts with the superconducting magnets (SCM) mounted on the magnetic levitation vehicle. A multiphase propulsion system interconnects specific coils in a given magnetic rail and interacts with the SCM to produce a propulsion force to the vehicle.

  4. Development and Evaluation of a Combined Cultivator and Band Sprayer with a Row-Centering RTK-GPS Guidance System

    PubMed Central

    Perez-Ruiz, Manuel; Carballido, Jacob; Agüera, Juan; Rodríguez-Lizana, Antonio

    2013-01-01

    Typically, low-pressure sprayers are used to uniformly apply pre- and post-emergent herbicides to control weeds in crop rows. An innovative machine for weed control in inter-row and intra-row areas, with a unique combination of inter-row cultivation tooling and intra-row band spraying for six rows and an electro-hydraulic side-shift frame controlled by a GPS system, was developed and evaluated. Two weed management strategies were tested in the field trials: broadcast spraying (the conventional method) and band spraying with mechanical weed control using RTK-GPS (the experimental method). This approach enabled the comparison between treatments from the perspective of cost savings and efficacy in weed control for a sugar beet crop. During the 2010–2011 season, the herbicide application rate (112 L ha−1) of the experimental method was approximately 50% of the conventional method, and thus a significant reduction in the operating costs of weed management was achieved. A comparison of the 0.2-trimmed means of weed population post-treatment showed that the treatments achieved similar weed control rates at each weed survey date. Sugar beet yields were similar with both methods (p = 0.92). The use of the experimental equipment is cost-effective on ≥20 ha of crops. These initial results show good potential for reducing herbicide application in the Spanish beet industry. PMID:23478600

  5. The yield of mechanically harvested rapeseed (Brassica napus L.) can be increased by optimum plant density and row spacing

    PubMed Central

    Kuai, Jie; Sun, Yingying; Zuo, Qingsong; Huang, Haidong; Liao, Qingxi; Wu, Chongyou; Lu, Jianwei; Wu, Jiangsheng; Zhou, Guangsheng

    2015-01-01

    To determine the effects of plant density and row spacing on the mechanical harvesting of rapeseed (Brassica napus L.), field experiments were conducted. Higher plant density produced fewer pods and reduced the yield per plant. Wider row spacing at higher plant densities increased seeds per pod and the 1000-seed weight, resulting in a higher yield per plant. The highest yields were achieved at a density of 45 × 104 plants ha−1 (D45) in combination with 15 cm row spacing (R15) because mortality associated with competition increased as both the plant density and row spacing increased. The leaf area index (LAI) and pod area index (PAI) showed similar relations to the yield per hectare, and they were positively correlated with the percentage of intercepted light, whereas the radiation use efficiency (RUE) was positively correlated with population biomass. Reduced plant height and increased root/shoot ratios led to a decreased culm lodging index. Improved resistance to pod shattering was also observed as plant density and row spacing increased. The angle of the lowest 5 branches decreased as row spacing increased under D30 and D45. All of these structural changes influenced the mechanical harvesting operations, resulting in the highest yield of mechanically harvesting rapeseed under D45R15. PMID:26686007

  6. Accessible or Inaccessible? Diagnostic Efficacy of CT-Guided Core Biopsies of Head and Neck Masses

    SciTech Connect

    Cunningham, Jane D. McCusker, Mark W.; Power, Sarah; PearlyTi, Joanna; Thornton, John; Brennan, Paul; Lee, Michael J.; O’Hare, Alan; Looby, Seamus

    2015-04-15

    PurposeTissue sampling of lesions in the head and neck is challenging due to complex regional anatomy and sometimes necessitates open surgical biopsy. However, many patients are poor surgical candidates due to comorbidity. Thus, we evaluated the use of CT guidance for establishing histopathological diagnosis of head and neck masses.MethodsAll consecutive patients (n = 22) who underwent CT-guided core biopsy of head or neck masses between April 2009 and August 2012 were retrospectively reviewed using the departmental CT interventional procedures database. The indication for each biopsy performed was to establish or exclude a diagnosis of neoplasia in patients with suspicious head or neck lesions found on clinical examination or imaging studies. Patients received conscious sedation and 18 G, semiautomated core needle biopsies were performed by experienced neuroradiologists using 16-slice multidetector row CT imaging guidance (Somatom Definition Siemens Medical Solutions, Germany). Histopathology results of each biopsy were analysed.ResultsSixteen of 22 biopsies that were performed (73 %) yielded a pathological diagnosis. Anatomic locations biopsied included: masticator (n = 7), parapharyngeal (n = 3), parotid (n = 3), carotid (n = 3), perivertebral (n = 3), pharyngeal (n = 2), and retropharyngeal (n = 1) spaces. Six biopsies (27 %) were nondiagnostic due to inadequate tissue sampling, particularly small biopsy sample size and failure to biopsy the true sampling site due to extensive necrosis. No major complications were encountered.ConclusionsThe use of CT guidance to perform core biopsies of head and neck masses is an effective means of establishing histopathological diagnosis and reduces the need for diagnostic open surgical biopsy and general anaesthesia.

  7. Contrast Enhancement of the Right Ventricle during Coronary CT Angiography – Is It Necessary?

    PubMed Central

    Kok, Madeleine; Kietselaer, Bas L. J. H.; Mihl, Casper; Altintas, Sibel; Nijssen, Estelle C.; Wildberger, Joachim E.; Das, Marco

    2015-01-01

    Purpose It is unclear if prolonged contrast media injection, to improve right ventricular visualization during coronary CT angiography, leads to increased detection of right ventricle pathology. The purpose of this study was to evaluate right ventricle enhancement and subsequent detection of right ventricle disease during coronary CT angiography. Materials and Methods 472 consecutive patients referred for screening coronary CT angiography were retrospectively evaluated. Every patient underwent multidetector-row CT of the coronary arteries: 128x 0.6mm coll., 100-120kV, rot. time 0.28s, ref. mAs 350 and received an individualized (P3T) contrast bolus injection of iodinated contrast medium (300 mgI/ml). Patient data were analyzed to assess right ventricle enhancement (HU) and right ventricle pathology. Image quality was defined good when right ventricle enhancement >200HU, moderate when 140-200HU and poor when <140HU. Results Good image quality was found in 372 patients, moderate in 80 patients and poor in 20 patients. Mean enhancement of the right ventricle cavity was 268HU±102. Patients received an average bolus of 108±24 ml at an average peak flow rate of 6.1±2.2 ml/s. In only three out of 472 patients (0.63%) pathology of the right ventricle was found (dilatation) No other right ventricle pathology was detected. Conclusion Right ventricle pathology was detected in three out of 472 patients; the dilatation observed in these three cases may have been picked up even without dedicated enhancement of the right ventricle. Based on our findings, right ventricle enhancement can be omitted during screening coronary CT angiography. PMID:26029905

  8. Malignant external otitis: CT evaluation

    SciTech Connect

    Curtin, H.D.; Wolfe, P.; May, M.

    1982-11-01

    Malignant external otitis is an aggressive infection caused by Pseudomonas aeruginosa that most often occurs in elderly diabetics. Malignant external otitis often spreads inferiorly from the external canal to involve the subtemporal area and progresses medially towards the petrous apex leading to multiple cranial nerve palsies. The computed tomographic (CT) findings in malignant external otitis include obliteration of the normal fat planes in the subtemporal area as well as patchy destruction of the bony cortex of the mastoid. The point of exit of the various cranial nerves can be identified on CT scans, and the extent of the inflammatory mass correlates well with the clinical findings. Four cases of malignant external otitis are presented. In each case CT provided a good demonstration of involvement of the soft tissues at the base of the skull.

  9. Renal applications of dual-energy CT.

    PubMed

    Kaza, Ravi K; Platt, Joel F

    2016-06-01

    Dual-energy CT is being increasingly used for abdominal imaging due to its incremental benefit of material characterization without significant increase in radiation dose. Knowledge of the different dual-energy CT acquisition techniques and image processing algorithms is essential to optimize imaging protocols and understand potential limitations while using dual-energy CT renal imaging such as urinary calculi characterization, assessment of renal masses and in CT urography. This review article provides an overview of the current dual-energy CT techniques and use of dual-energy CT in renal imaging.

  10. Morphometrical dimensions of the sheep thoracolumbar vertebrae as seen on digitised CT images.

    PubMed

    Mageed, Mahmoud; Berner, Dagmar; Jülke, Henriette; Hohaus, Christian; Brehm, Walter; Gerlach, Kerstin

    2013-09-01

    The sheep spine is widely used as a model for preclinical research in human medicine to test new spinal implants and surgical procedures. Therefore, precise morphometric data are needed. The present study aimed to provide computed tomographic (CT) morphometry of sheep thoracolumbar spine. Five adult normal Merino sheep were included in this study. Sheep were anaesthetised and positioned in sternal recumbency. Subsequently, transverse and sagittal images were obtained using a multi-detector-row helical CT scanner. Measurements of the vertebral bodies, pedicles, intervertebral disc and transverse processes were performed with dedicated software. Vertebral bodies and the spinal canal were wider than they were deep, most obviously in the lumbar vertebrae. The intervertebral discs were as much as 57.4% thicker in the lumbar than in the thoracic spine. The pedicles were higher and longer than they were wide over the entire thoracolumbar spine. In conclusion, the generated data can serve as a CT reference for the ovine thoracolumbar spine and may be helpful in using sheep spine as a model for human spinal research.

  11. The Use of Contrast-Enhanced Post Mortem CT in the Detection of Cardiovascular Deaths

    PubMed Central

    Penzkofer, Tobias; Kuhl, Christiane Katharina; Knüchel, Ruth; Mahnken, Andreas H.

    2014-01-01

    Objectives To evaluate the diagnostic value of contrast enhanced post mortem computed tomography (PMCT) in comparison to non-enhanced post mortem CT in the detection of cardiovascular causes of death (COD). Background As autopsy rates decline, new methods to determine CODs are necessary. So contrast enhanced PMCT shall be evaluated in comparison to established non-enhanced PMCT in order to further improve the method. Methods In a prospective study, 20 corpses were examined using a 64-row multisclice CT (MSCT) before and after intraarterial perfusion with a newly developed, barium-bearing contrast agent and ventilation of the lungs. The cause of death was determined in enhanced and unenhanced scans and a level of confidence (LOC) was given by three experienced radiologists on a scale between 0 and 4. Results were compared to autopsy results as gold standard. Autopsy was performed blinded to PMCT-findings. Results The method allowed visualization of different types of cause of death. There was a significant improvement in LOC in enhanced scans compared to unenhanced scans as well as an improvement in the detection of COD. The cause of death could be determined in 19 out of 20 patients. Conclusions PMCT is feasible and appears to be robust for diagnosing cardiovascular causes of death. When compared with unenhanced post-mortem CT intraarterial perfusion and pulmonary ventilation significantly improve visualization and diagnostic accuracy. These promising results warrant further studies. PMID:24759757

  12. PET/CT in radiation oncology

    SciTech Connect

    Pan, Tinsu; Mawlawi, Osama

    2008-11-15

    PET/CT is an effective tool for the diagnosis, staging and restaging of cancer patients. It combines the complementary information of functional PET images and anatomical CT images in one imaging session. Conventional stand-alone PET has been replaced by PET/CT for improved patient comfort, patient throughput, and most importantly the proven clinical outcome of PET/CT over that of PET and that of separate PET and CT. There are over two thousand PET/CT scanners installed worldwide since 2001. Oncology is the main application for PET/CT. Fluorine-18 deoxyglucose is the choice of radiopharmaceutical in PET for imaging the glucose uptake in tissues, correlated with an increased rate of glycolysis in many tumor cells. New molecular targeted agents are being developed to improve the accuracy of targeting different disease states and assessing therapeutic response. Over 50% of cancer patients receive radiation therapy (RT) in the course of their disease treatment. Clinical data have demonstrated that the information provided by PET/CT often changes patient management of the patient and/or modifies the RT plan from conventional CT simulation. The application of PET/CT in RT is growing and will become increasingly important. Continuing improvement of PET/CT instrumentation will also make it easier for radiation oncologists to integrate PET/CT in RT. The purpose of this article is to provide a review of the current PET/CT technology, to project the future development of PET and CT for PET/CT, and to discuss some issues in adopting PET/CT in RT and potential improvements in PET/CT simulation of the thorax in radiation therapy.

  13. Acute pancreatitis: clinical vs. CT findings

    SciTech Connect

    Hill, M.C.; Barkin, J.; Isikoff, M.B.; Silver stein, W.; Kalser, M.

    1982-08-01

    In a prospective study of 91 patients with acute pancreatitis, computed tomographic (CT) findings were correlated with the clinical type of acute pancreatitis. In acute edematous pancreatitis (63 patients; 16 with repeat CT), CT was normal (28%) or showed inflammation limited to the pancreas (61%). Phlegmonous changes were present in 11%, including one patient with focal pancreatic hemorrhage, indicating that clinically unsuspected hemorrhagic pancreatitis can occur. In acute necrotizing (hemorrhagic, suppurative) pancreatitis (nine patients; eight with repeat CT), no patient had a normal CT scan and 89% had phlegmonous changes. One patient had hemorrhagic pancreatitis and three had abscesses. In acute exacerbation of chronic pancreatitis (10 patients; three with repeat CT), there were pancreatic calcifications (70%), a focal mass (40%), and pancreatic ductal dilation (30%). On follow-up CT, the findings of acute pancreatitis did not always disappear with resolution of the clinical symptons. This was especialy true of phlegmonous pancreatitis, where the CT findings could persist for months.

  14. Cardiac Computed Tomography (Multidetector CT, or MDCT)

    MedlinePlus

    ... High Blood Pressure Tools & Resources Stroke More Cardiac Computed Tomography (Multidetector CT, or MDCT) Updated:Sep 3,2015 ... facts MDCT is a very fast type of computed tomography (CT) scan. MDCT creates pictures of the healthy ...

  15. Pocket atlas of normal CT anatomy

    SciTech Connect

    Weinstein, J.B.; Lee, J.K.T.; Sagel, S.S.

    1985-01-01

    This book is a quick reference for interpreting CT scans of the extracranial organs. This collection of 41 CT scans covers all the major organs of the body: neck and larynx; chest; abdomen; male pelvis; and female pelvis.

  16. Predictors of Outcomes after Arthroscopic Double-row Rotator Cuff Repair in 155 Cases

    PubMed Central

    Katthagen, Jan Christoph; Millett, Peter J.; Espinoza-Ervin, Christopher; Horan, Marilee P.; Ho, Charles P.; Warth, Ryan J.; Dornan, Grant

    2016-01-01

    Objectives: The purpose of this study was to analyze predictors of clinical outcomes of knotted versus knotless double-row self-reinforcing rotator cuff repairs of full-thickness rotator cuff tears with propensity score matching. Methods: Patients with arthroscopic repair of full-thickness rotator cuff tears involving the supraspinatus tendon using either a knotted or knotless linked, self-reinforcing double-row technique were included in the study. Preoperative subjective evaluation was performed using the ASES and SF-12 PCS scores. After a minimum two-year follow-up period, ASES and SF-12 PCS scores were collected again along with the SANE score, the QuickDASH score, and patient satisfaction. All data were collected prospectively and retrospectively reviewed. Postoperative ASES and SF-12 PCS scores were then modeled using inverse propensity score weighting in a multiple linear regression model (MLR) with multiple imputations. Age, sex, baseline ASES score, length of follow-up, number of anchors, worker’s compensation, previous cuff repair, and double-row repair technique (knotted or knotless) were the covariates used in this model. Results: 155 shoulders in 151 patients (109 men, 42 women; mean age at time of surgery 59±10 years) were eligible for inclusion. Outcomes data were available for 130 of 148 shoulders (87.8%) after exclusion of seven shoulders (4.5%) that underwent revision rotator cuff repair before final follow up (n=33/39 in the knotted group [84.6%]; n=97/109 [88.9%] in the knotless group).The mean follow-up was 2.9 years (range, 2.0-5.4 years). Overall, postoperative outcomes scores were significantly improved when compared to preoperative baselines (p<0.05), with a median postoperative ASES score of 97 for the entire cohort. Our model showed that previous rotator cuff repair had a significant negative effect on postoperative ASES (β = -12.7, p<0.001) and SF-12 PCS scores (β = -5.0, p = 0.036). A workers’ compensation claim (β = -10.6, p

  17. The price of privately releasing contingency tables, and the spectra of random matrices with correlated rows

    SciTech Connect

    Kasiviswanathan, Shiva; Rudelson, Mark; Smith, Adam

    2009-01-01

    Contingency tables are the method of choice of government agencies for releasing statistical summaries of categorical data. In this paper, we consider lower bounds on how much distortion (noise) is necessary in these tables to provide privacy guarantees when the data being summarized is sensitive. We extend a line of recent work on lower bounds on noise for private data analysis [10, 13. 14, 15] to a natural and important class of functionalities. Our investigation also leads to new results on the spectra of random matrices with correlated rows. Consider a database D consisting of n rows (one per individual), each row comprising d binary attributes. For any subset of T attributes of size |T| = k, the marginal table for T has 2{sup k} entries; each entry counts how many times in the database a particular setting of these attributes occurs. Imagine an agency that wishes to release all (d/k) contingency tables for a given database. For constant k, previous work showed that distortion {tilde {Omicron}}(min{l_brace}n, (n{sup 2}d){sup 1/3}, {radical}d{sup k}{r_brace}) is sufficient for satisfying differential privacy, a rigorous definition of privacy that has received extensive recent study. Our main contributions are: (1) For {epsilon}- and ({epsilon}, {delta})-differential privacy (with {epsilon} constant and {delta} = 1/poly(n)), we give a lower bound of {tilde {Omega}}(min{l_brace}{radical}n, {radical}d{sup k}{r_brace}), which is tight for n = {tilde {Omega}}(d{sup k}). Moreover, for a natural and popular class of mechanisms based on additive noise, our bound can be strengthened to {Omega}({radical}d{sup k}), which is tight for all n. Our bounds extend even to non-constant k, losing roughly a factor of {radical}2{sup k} compared to the best known upper bounds for large n. (2) We give efficient polynomial time attacks which allow an adversary to reconstruct sensitive infonnation given insufficiently perturbed contingency table releases. For constant k, we obtain a

  18. Ranchero Armature Test LA-19.4-CT-3: PBX-9501 Explosive with no smoothing layer. Firing point 88, 9/16/13

    SciTech Connect

    Glover, Brian B.; Goforth, James H.; Rae, Philip John; Dickson, Peter; Briggs, Matthew E.; Marr-Lyon, Mark; Hare, Steven John; Herrera, Dennis Harold; Watt, Robert Gregory; Rousculp, Christopher L.

    2014-11-13

    LA-19.4-CT-3 (CT-3) was the third camera test in a series beginning in 1/11, which diagnose the performance of 6 mm thick, 6061 T-0 Al Ranchero armatures. [The test LA-43-CT-2 (CT-2) is described in LA-UR-14-21983.] The goal of CT-3 was to verify that PBX-9501, with 18 mm point spacing and no smoothing layer, could be used for Ranchero generator armatures in place of PBXN-110, which had been used in all previous Ranchero applications. CT-1 and CT-2 both had 43 cm long slapper detonator systems imbedded in the cast PBXN-110 explosive, but manufacturing a charge for a similar 9501 test was not cost effective. Instead, a single cylinder of 9501, 19.368 cm long and 15.494 cm (6.100”)in diameter, had a groove machined to accommodate a row of 11 SE-1 detonators with 18 mm point spacing along the mid-plane of the cylinder. The expansion of the armature looks like a slapper assembly along almost ½ of the circumference, and provides adequate proof of concept. Removing the smoother from PBXN-110-driven armatures increased the armature velocity from 3.1 mm/μs to 3.3 mm/μs, as seen in CT-2, and the velocity measured on CT-3 increased to 3.8 mm/μs. In addition, the camera records show that the surface of the armature is smooth enough, and free from ruptures for an expansion of greater that 2X. The advantage of using 9501 is that it precludes concerns about blow-outs seen when bubbles are left in the cast material, and gives extra velocity. The disadvantage is that the machined explosives are more expensive.

  19. CT "halo sign" in pulmonary tuberculoma.

    PubMed

    Gaeta, M; Volta, S; Stroscio, S; Romeo, P; Pandolfo, I

    1992-01-01

    The CT halo sign has been described as the CT finding of a low-attenuation zone surrounding a pulmonary nodule. It is an early clue to the diagnosis of invasive pulmonary aspergillosis. We describe a case of CT halo sign associated with a pulmonary tuberculoma. Therefore, we think that a diagnosis other than invasive pulmonary aspergillosis should be considered in the presence of the CT halo sign in immunocompetent patients.

  20. CT Scans - Multiple Languages: MedlinePlus

    MedlinePlus

    ... الأشعة المقطعية الحاسوبية - العربية Bilingual PDF Health Information Translations Chinese - Simplified (简体中文) CT (Computerized Tomography) Scan CT ( ... 扫描 - 简体中文 (Chinese - Simplified) Bilingual PDF Health Information Translations Chinese - Traditional (繁體中文) CT (Computerized Tomography) Scan CT ( ...

  1. Metal-Ligand Bonds of Second- and Third-Row d-Block Metals Characterized by Density Functional Theory

    NASA Astrophysics Data System (ADS)

    Jensen, Kasper P.

    2009-08-01

    This paper presents systematic data for 200 neutral diatomic molecules ML (M is a second- or third-row d-block metal and L = H, F, Cl, Br, I, C, N, O, S, or Se) computed with the density functionals TPSSh and BP86. With experimental structures and bond enthalpies available for many of these molecules, the computations first document the high accuracy of TPSSh, giving metal-ligand bond lengths with a mean absolute error of ˜0.01 Å for the second row and 0.03 Å for the third row. TPSSh provides metal-ligand bond enthalpies with mean absolute errors of 37 and 44 kJ/mol for the second- and third-row molecules, respectively. Pathological cases (e.g., HgC and HgN) have errors of up to 155 kJ/mol, more than thrice the mean (observed with both functionals). Importantly, the systematic error component is negligible as measured by a coefficient of the linear regression line of 0.99. Equally important, TPSSh provides uniform accuracy across all three rows of the d-block, which is unprecedented and due to the 10% exact exchange, which is close to optimal for the d-block as a whole. This work provides an accurate and systematic prediction of electronic ground-state spins, characteristic metal-ligand bond lengths, and bond enthalpies for many as yet uncharacterized diatomics, of interest to researchers in the field of second- and third-row d-block chemistry. We stress that the success of TPSSh cannot be naively extrapolated to other special situations such as, e.g., metal-metal bonds. The high accuracy of the procedure further implies that the effective core functions used to model relativistic effects are necessary and sufficient for obtaining accurate geometries and bond enthalpies of second- and third-row molecular systems.

  2. Optimized Parallelization for Nonlocal Means Based Low Dose CT Image Processing.

    PubMed

    Zhang, Libo; Yang, Benqiang; Zhuang, Zhikun; Hu, Yining; Chen, Yang; Luo, Limin; Shu, Huazhong

    2015-01-01

    Low dose CT (LDCT) images are often significantly degraded by severely increased mottled noise/artifacts, which can lead to lowered diagnostic accuracy in clinic. The nonlocal means (NLM) filtering can effectively remove mottled noise/artifacts by utilizing large-scale patch similarity information in LDCT images. But the NLM filtering application in LDCT imaging also requires high computation cost because intensive patch similarity calculation within a large searching window is often required to be used to include enough structure-similarity information for noise/artifact suppression. To improve its clinical feasibility, in this study we further optimize the parallelization of NLM filtering by avoiding the repeated computation with the row-wise intensity calculation and the symmetry weight calculation. The shared memory with fast I/O speed is also used in row-wise intensity calculation for the proposed method. Quantitative experiment demonstrates that significant acceleration can be achieved with respect to the traditional straight pixel-wise parallelization. PMID:26078781

  3. Optimized Parallelization for Nonlocal Means Based Low Dose CT Image Processing

    PubMed Central

    Zhang, Libo; Yang, Benqiang; Zhuang, Zhikun; Hu, Yining; Chen, Yang; Luo, Limin; Shu, Huazhong

    2015-01-01

    Low dose CT (LDCT) images are often significantly degraded by severely increased mottled noise/artifacts, which can lead to lowered diagnostic accuracy in clinic. The nonlocal means (NLM) filtering can effectively remove mottled noise/artifacts by utilizing large-scale patch similarity information in LDCT images. But the NLM filtering application in LDCT imaging also requires high computation cost because intensive patch similarity calculation within a large searching window is often required to be used to include enough structure-similarity information for noise/artifact suppression. To improve its clinical feasibility, in this study we further optimize the parallelization of NLM filtering by avoiding the repeated computation with the row-wise intensity calculation and the symmetry weight calculation. The shared memory with fast I/O speed is also used in row-wise intensity calculation for the proposed method. Quantitative experiment demonstrates that significant acceleration can be achieved with respect to the traditional straight pixel-wise parallelization. PMID:26078781

  4. Multi-wavelength access gate for WDM-formatted words in optical RAM row architectures

    NASA Astrophysics Data System (ADS)

    Fitsios, D.; Alexoudi, T.; Vagionas, C.; Miliou, A.; Kanellos, G. T.; Pleros, N.

    2013-03-01

    Optical RAM has emerged as a promising solution for overcoming the "Memory Wall" of electronics, indicating the use of light in RAM architectures as the approach towards enabling ps-regime memory access times. Taking a step further towards exploiting the unique wavelength properties of optical signals, we reveal new architectural perspectives in optical RAM structures by introducing WDM principles in the storage area. To this end, we demonstrate a novel SOAbased multi-wavelength Access Gate for utilization in a 4x4 WDM optical RAM bank architecture. The proposed multiwavelength Access Gate can simultaneously control random access to a 4-bit optical word, exploiting Cross-Gain-Modulation (XGM) to process 8 Bit and Bit channels encoded in 8 different wavelengths. It also suggests simpler optical RAM row architectures, allowing for the effective sharing of one multi-wavelength Access Gate for each row, substituting the eight AGs in the case of conventional optical RAM architectures. The scheme is shown to support 10Gbit/s operation for the incoming 4-bit data streams, with a power consumption of 15mW/Gbit/s. All 8 wavelength channels demonstrate error-free operation with a power penalty lower than 3 dB for all channels, compared to Back-to-Back measurements. The proposed optical RAM architecture reveals that exploiting the WDM capabilities of optical components can lead to RAM bank implementations with smarter column/row encoders/decoders, increased circuit simplicity, reduced number of active elements and associated power consumption. Moreover, exploitation of the wavelength entity can release significant potential towards reconfigurable optical cache mapping schemes when using the wavelength dimension for memory addressing.

  5. Lower Back Injuries in Rowing National Level Compared to International Level Rowers

    PubMed Central

    Verrall, Geoffrey; Darcey, Andrew

    2014-01-01

    Background: Rowing injuries are common, with lower back injuries having the highest incidence. Objectives: This study was to investigate the major rowing injuries seen at a single high performance rowing sports program over a 5 years training period and establish if any relationship exists between these injuries and the level of competition that the rower is partaking in. Patients and Methods: All rowers at the South Australian Sports Institute (SASI) programs were designated as being either international or national level rowers. Injuries that caused greater than 5 days training loss during any one training year were recorded. The number of lower back injuries and rib stress injuries causing training time loss were analysed to assess whether there was any association between the level of rower and the nature and type of injury causing training time loss. Results: Forty-five national rowers (97 training years) had 15 lower back injuries compared to 12 international rowers 35 training years) with 1 lower back injury. Thus a national level rower was more likely to have a lower back injury compared to an international rower P = 0.05. In contrast an international level was more likely to have a rib stress fracture compared to a national rower P = 0.04. 21% of all injuries in this study were a consequence of cycling injuries. Conclusions: Lower back injuries are a significant cause of training time lost in rowers. These injuries are much more likely to occur in national level rowers when compared to international level rowers. In contrast rib stress injuries are associated with international compared to national level rowers. PMID:25741422

  6. Cerebrovascular responses during rowing: Do circadian rhythms explain morning and afternoon performance differences?

    PubMed

    Faull, O K; Cotter, J D; Lucas, S J E

    2015-08-01

    The purpose of this study was to characterize cerebrovascular responses to rowing exercise, investigating whether their diurnal variation might explain performance differences across a day. Twelve male rowers completed incremental rowing exercise and a 2000-m ergometer time trial at 07:00 h and 16:00 h, 1 week apart, while middle cerebral artery velocity (MCAv), cerebral (prefrontal), and muscular (vastus lateralis) tissue oxygenation and hemoglobin volume (via near-infrared spectroscopy), heart rate, and pressure of end-tidal CO2 (PET CO2) were recorded. MCAv was 20-25% above resting levels (68 ± 12 cm/s) during submaximal and maximal exercise intensities, despite PET CO2 being reduced during maximal efforts (down ∼ 0.5-0.8 kPa); thus revealing a different perfusion profile to the inverted-U observed in other exercise modes. The afternoon time trial was 3.4 s faster (95% confidence interval 0.9-5.8 s) and mean power output 3.2% higher (337 vs 347 W; P = 0.04), in conjunction with similar exercise-induced elevations in MCAv (P = 0.60) and reductions in cerebral oxygenation (TOI) (P = 0.12). At the muscle, afternoon trials involved similar oxygen extraction (HHb volume and TOI) albeit from a relatively lower total Hb volume (P < 0.01). In conclusion, rowing performance was better in the afternoon, but not in conjunction with differences in MCAv or exercise-induced differences in cerebral oxygenation. PMID:24942089

  7. CT Innovators Reunion: Where Are They Now?

    ERIC Educational Resources Information Center

    Schaffhauser, Dian

    2012-01-01

    Each year, "Campus Technology" ("CT") gazes across higher ed horizons to identify the most innovative IT programs at colleges and universities around the globe. The projects "CT" profiles are inspiring examples of technology making a difference on campus--at least at that moment. The question is, have they stood the test of time? "CT" followed up…

  8. Pulmonary arterial hypertension: an imaging review comparing MR pulmonary angiography and perfusion with multidetector CT angiography

    PubMed Central

    Junqueira, F P; Lima, C M A O; Coutinho, A C; Parente, D B; Bittencourt, L K; Bessa, L G P; Domingues, R C; Marchiori, E

    2012-01-01

    Pulmonary hypertension (PH) is a progressive disease that leads to substantial morbidity and eventual death. Pulmonary multidetector CT angiography (MDCTA), pulmonary MR angiography (MRA) and MR-derived pulmonary perfusion (MRPP) imaging are non-invasive imaging techniques for the differential diagnosis of PH. MDCTA is considered the gold standard for the diagnosis of pulmonary embolism, one of the most common causes of PH. MRA and MRPP are promising techniques that do not require the use of ionising radiation or iodinated contrast material, and can be useful for patients for whom such material cannot be used. This review compares the imaging aspects of pulmonary MRA and 64-row MDCTA in patients with chronic thromboembolic or idiopathic PH. PMID:22932061

  9. Confining barriers for surface state electrons tailored by monatomic Fe rows on vicinal Au111 surfaces.

    PubMed

    Shiraki, Susumu; Fujisawa, Hideki; Nantoh, Masashi; Kawai, Maki

    2004-03-01

    We fabricated monatomic Fe wires on vicinal Au(111) surfaces and found that decoration of step edges with Fe adatoms has a significant influence on the behavior of surface state electrons confined between regularly arranged steps. On a surface with Fe monatomic rows, angle-resolved photoemission spectra measured in the direction perpendicular to the steps shows parabolic dispersion, in contrast to one-dimensional quantum-well levels observed on a clean surface. Simple analysis using a one-dimensional Kronig-Penney model reveals potential barrier reduction from 20 to 4.6 eV A, suggesting an attractive nature of the Fe adatoms as scatterers.

  10. Study of Low Reynolds Number Effects on the Losses in Low-Pressure Turbine Blade Rows

    NASA Technical Reports Server (NTRS)

    Dorney, Daniel J.; Ashpis, David E.

    1998-01-01

    Experimental data from jet-engine tests have indicated that unsteady blade row interactions and separation can have a significant impact on the efficiency of low-pressure turbine stages. Measured turbine efficiencies at takeoff can be as much as two points higher than those at cruise conditions. Several recent studies have revealed that Reynolds number effects may contribute to the lower efficiencies at cruise conditions. In the current study numerical experiments have been performed to study the models available for low Reynolds number flows, and to quantify the Reynolds number dependence of low-pressure turbine cascades and stages. The predicted aerodynamic results exhibit good agreement with design data.

  11. Unsteady three-dimensional incompressible flow interaction in multiple-blade-row turbomachinery

    NASA Astrophysics Data System (ADS)

    Busby, Judy Ann

    Marine propulsors operate in an inherently unsteady flowfield. To design a propulsor that meets the conditions imposed by hydrodynamic and hydroacoustic requirements, knowledge of component interactions and unsteady flow patterns throughout the propulsor is essential. At the present time, the effect of the unsteady flow on the performance of the propulsor is not thoroughly understood. The goal of this work is to use computational fluid dynamics (CFD) coupled with measurements and analytic methods to provide some insight into the physics associated with unsteady propulsor flows. The unsteady, incompressible Reynolds-Averaged Navier Stokes (RANS) code developed at Mississippi State University has been extended for use in analyzing the unsteady flow interaction between blade rows in relative motion. The approach used to model the dynamic interface between the blade rows is the localized grid distortion technique of Janus. The spatial and temporal discretizations result in third order spatial accuracy and second order (implicit) temporal accuracy. To validate the dynamic grid capabilities, computed results for the unsteady flow around a two-dimensional hydrofoil undergoing a high, reduced-frequency gust loading are compared with measured data. The unsteady gusts are generated by a pair of oscillating foils (flappers) upstream of the hydrofoil. A dynamic grid is used around the oscillating foils. The results from a parametric study indicate that 500 time steps per flapper period with three subiterations at each time step are sufficient to capture the time-accurate behavior of both the inviscid and viscous flow fields. The algorithm is then used to compute the unsteady flow through a three-dimensional, high Reynolds number pump consisting of 13 stator blades and 7 rotor blades. A detailed analysis of the primary, secondary and unsteady flow effects is presented along with an investigation of the effects of sub-iterations on the time-accuracy on the solution. The unsteady

  12. Data Sharing Report Characterization of Isotope Row Facilities Oak Ridge National Laboratory Oak Ridge TN

    SciTech Connect

    Weaver, Phyllis C

    2013-12-12

    The U.S. Department of Energy (DOE) Oak Ridge Office of Environmental Management (EM-OR) requested that Oak Ridge Associated Universities (ORAU), working under the Oak Ridge Institute for Science and Education (ORISE) contract, provide technical and independent waste management planning support using funds provided by the American Recovery and Reinvestment Act (ARRA). Specifically, DOE EM-OR requested ORAU to plan and implement a survey approach, focused on characterizing the Isotope Row Facilities located at the Oak Ridge National Laboratory (ORNL) for future determination of an appropriate disposition pathway for building debris and systems, should the buildings be demolished. The characterization effort was designed to identify and quantify radiological and chemical contamination associated with building structures and process systems. The Isotope Row Facilities discussed in this report include Bldgs. 3030, 3031, 3032, 3033, 3033A, 3034, 3036, 3093, and 3118, and are located in the northeast quadrant of the main ORNL campus area, between Hillside and Central Avenues. Construction of the isotope production facilities was initiated in the late 1940s, with the exception of Bldgs. 3033A and 3118, which were enclosed in the early 1960s. The Isotope Row facilities were intended for the purpose of light industrial use for the processing, assemblage, and storage of radionuclides used for a variety of applications (ORNL 1952 and ORAU 2013). The Isotope Row Facilities provided laboratory and support services as part of the Isotopes Production and Distribution Program until 1989 when DOE mandated their shutdown (ORNL 1990). These facilities performed diverse research and developmental experiments in support of isotopes production. As a result of the many years of operations, various projects, and final cessation of operations, production was followed by inclusion into the surveillance and maintenance (S&M) project for eventual decontamination and decommissioning (D&D). The

  13. Restraint chair with rowing-like movement for exposing exercising nonhuman primates to microwave irradiation

    SciTech Connect

    Knepton, J.; Ezell, C.; de Lorge, J.

    1983-04-20

    Design and construction of a Styrofoam exercise restraint chair is described for use with rhesus monkeys exposed to microwaves. Monkeys usually learn the rowing-like motion of the device within five 1-hour conditioning sessions. Radiation intensity measure of the chair and an example animal experiment demonstrated the chair's suitability for bioelectromagnetic studies. Results of a series of base-line behavioral sessions demonstrated concomitant exercise work load effects on colonic temperature, heart rate, correct response rate, and post-reinforcement pause time. With additional instrumentation, detection of minute disturbances of integrated psychological and physiological mechanisms by unusual environmental factors may be possible.

  14. Pesticide occurrence in groundwater in areas of high-density row crop production in Alabama, 2009

    USGS Publications Warehouse

    Moreland, Richard S.

    2011-01-01

    High-density row crop production occurs in three areas of Alabama that are underlain by productive aquifers, northern Alabama, southeastern Alabama, and Baldwin County in southwestern Alabama. The U.S. Geological Survey collected five groundwater samples from each of these three areas during 2009 for analysis of selected pesticides. Results of these analyses showed detections for 37 of 152 analytes. The three most frequently detected compounds were atrazine, 2-Chloro-4-isopropylamino-6-amino-triazine (CIAT), and metolachlor. The highest concentration for any analyte was 4.08 micrograms per liter for metolachlor.

  15. Ground-state properties of third-row elements with nonlocal density functionals

    SciTech Connect

    Bagno, P.; Jepsen, O.; Gunnarsson, O.

    1989-07-15

    The cohesive energy, the lattice parameter, and the bulk modulus of third-row elements are calculated using the Langreth-Mehl-Hu (LMH), the Perdew-Wang (PW), and the gradient expansion functionals. The PW functional is found to give somewhat better results than the LMH functional and both are found to typically remove half the errors in the local-spin-density (LSD) approximation, while the gradient expansion gives worse results than the local-density approximation. For Fe both the LMH and PW functionals correctly predict a ferromagnetic bcc ground state, while the LSD approximation and the gradient expansion predict a nonmagnetic fcc ground state.

  16. Law & psychiatry: Death row delusions: when is a prisoner competent to be executed?

    PubMed

    Appelbaum, Paul S

    2007-10-01

    This column examines a recent U.S. Supreme Court decision in Panetti v. Quarterman, which embraced a broader view of what makes death row prisoners incompetent to be executed. Although the defendant understood that he was to be executed and the state's purported reason for seeking his death--two criteria suggested by the Court's 1986 decision in Ford v. Wainwright--he suffered from a fixed delusion about the actual reason for his death. The Court indicated that competent prisoners must have a "rational understanding" of the reason that a death penalty is being imposed but declined to define a clear standard.

  17. Psychiatric, neurological, and psychoeducational characteristics of 15 death row inmates in the United States.

    PubMed

    Lewis, D O; Pincus, J H; Feldman, M; Jackson, L; Bard, B

    1986-07-01

    The authors present the results of clinical evaluations of 15 death row inmates, chosen for examination because of the imminence of their executions and not for evidence of neuropsychopathology. All had histories of severe head injury, five had major neurological impairment, and seven others had other, less serious neurological problems (e.g., blackouts, soft signs). Psychoeducational testing provided further evidence of CNS dysfunction. Six subjects had schizophreniform psychoses antedating incarceration and two others were manic-depressive. The authors conclude that many condemned individuals probably suffer unrecognized severe psychiatric, neurological, and cognitive disorders relevant to considerations of mitigation.

  18. Topological analysis of third-row main group dicarbides with molecular oxygen: A theoretical study

    SciTech Connect

    Parida, Saroj K.; Sahu, Sridhar

    2015-08-28

    Topological analysis of third-row main group dicarbides with molecular oxygen is calculated using density functional theory (DFT). In addition, Bader topological analysis show large electron density at the bond critical point (BCP) between carbon of C{sub 2}X cluster and oxygen (of molecular oxygen), inferring that the C–O bonding to be more shared-type as compared to that of X - O bonding. This fact is also confirmed by larger positive value of electron density (ρ) and negative ∇{sup 2}ρ. Similar conclusion is also obtained from the delocalization index (δ) which, in the case of C-O is found to be comparatively large.

  19. Non-invasive assessment of coronary artery bypass graft with retrospectively ECG-gated four-row multi-detector spiral computed tomography.

    PubMed

    Marano, Riccardo; Storto, Maria Luigia; Maddestra, Nicola; Bonomo, Lorenzo

    2004-08-01

    The purpose of this study was to assess the accuracy of four-row multi-detector CT (MDCT) in the evaluation of coronary artery bypass graft (CABG) in patients with at least a left internal mammary artery (LIMA) grafted to the left anterior descending artery (LAD), because of the conduit of choice in bypass surgery and the greater difficulty of evaluation with non-invasive diagnostic tools. Included in the study were 57 patients with a total of 122 grafts (95 arterial and 27 venous) who underwent MDCT (4x2.5-mm detector-collimation, 3-mm slice width, 1.5-mm reconstruction increment) with retrospective ECG gating. Twelve patients (21%) with high heart rates were given beta-blockers in order to obtain a heart rate lateral>posterior-inferior wall; P=0.002). In the remaining 30 patent grafts (33%), the assessment of stenoses was hampered by surgical clips, calcifications and motion artifacts. Sensitivity and specificity of MDCT for detection of significant graft stenoses were 80 and 96%, respectively. Inter-observer agreement was good ( K=0.73). MDCT seems to be a valuable diagnostic tool for non-invasive assessment of patency of both venous and arterial grafts. An accurate evaluation

  20. Effect of rainfall intensity and rain drop distribution on runoff and soil erosion on vineyards inter-rows with different soil management

    NASA Astrophysics Data System (ADS)

    Biddoccu, Marcella; Ferraris, Stefano; Pitacco, Andrea; Cavallo, Eugenio

    2015-04-01

    Vineyard is reported as one of the European agricultural crop where the runoff and soil erosion rates are the highest. In sloping vineyards, in particular, primary roles in determining high runoff and soil erosion rates are played by the alignment of vine-rows along the slope, soil cultivation and management, and traffic of machinery. Runoff and soil erosion processes are deeply related to climate, especially to rainfall intensity and precipitation pattern, along with the soil moisture content and soil surface conditions. Most of the European vineyards are grown in the Mediterranean area, where these aspects assume a specific pattern. A study was carried out to evaluate the role of rainfall intensity and raindrop size in generating runoff and soil erosion in vineyards, in relation to soil management. The study was conducted in the 'Tenuta Cannona Experimental Vine and Wine Centre' of Regione Piemonte, located in the Alto Monferrato hilly vine-growing area (NW Italy). Runoff and soil losses caused by natural rainfall events were monitored on two large (1221 m2) vineyard plots in the period May-November 2014. The plots are managed with different inter-row soil management techniques: tillage (T) and controlled grass cover (GC). An optical disdrometer was installed in the plots. Few rainfall events were observed occurred during summer and autumn, before the grape harvest and the execution of new tillage/mulching operation in autumn, triggering runoff events of different magnitude. For example, a summer storm with 1-min rainfall intensity of about 91 mm h-1gave a negligible amount of runoff (less than 1% of rainfall) in both plots . During a later similar rainfall runoff rates achieved 22% of rainfall and sediment yield of 290 kg ha-1 in the CT plot while it was 2% and 7 kg ha-1 in the GC plot. In the GC plot, in summer and early autumn rainfalls, runoff was less than 2% and sediment yield was lower than 10 kg ha-1. The two plots had a different evolution of the soil

  1. Overview of multisource CT systems and methods

    NASA Astrophysics Data System (ADS)

    Zhao, Jun; Lu, Yang; Zhuang, Tiange; Wang, Ge

    2010-09-01

    Multiple-source cone-beam scanning is a promising mode for dynamic volumetric CT/micro-CT. The first dynamic CT system is the Dynamic Spatial Reconstructor (DSR) built in 1979. The pursuance for higher temporal resolution has largely driven the development of CT technology, and recently led to the emergence of Siemens dual-source CT scanner. Given the impact and limitation of dual-source cardiac CT, triple-source cone-beam CT seems a natural extension for future cardiac CT. Our work shows that trinity (triple-source architecture) is superior to duality (dual-source architecture) for helical cone-beam CT in terms of exact reconstruction. In particular, a triple-source helical scan allows a perfect mosaic of longitudinally truncated cone-beam data to satisfy the Orlov condition and yields better noise performance than the dual-source counterpart. In the (2N+1)-source helical CT case, the more sources, the higher temporal resolution. In the N-source saddle CT case, a triple-source scan offers the best temporal resolution for continuous dynamic exact reconstruction of a central volume. The recently developed multi-source cone-beam algorithms include an exact backprojection-filtration (BPF) approach and a "slow" exact filtered-backprojection (FBP) algorithm for (2N+1)-source helical CT, two fast quasi-exact FBP algorithms for triple-source helical CT, as well as a fast exact FBP algorithm for triple-source saddle CT. Some latest ideas will be also discussed, such as multi-source interior tomography and multi-beam field-emission x-ray CT.

  2. Metal-metal multiple bonding in C3-symmetric bimetallic complexes of the first row transition metals.

    PubMed

    Krogman, Jeremy P; Thomas, Christine M

    2014-05-25

    Metal-metal multiple bonds have been an intense area of focus in inorganic chemistry for many decades as a result of their fundamentally interesting bonding properties, as well as their potential applications in multielectron transfer and small molecule activation processes. Much of what is known in this field revolves around 2nd and 3rd row transition metals, with fundamental knowledge lacking in the area of bonds between elements of the first transition series. The smaller size and tendency of first row ions to adopt high-spin electron configurations weaken metal-metal interactions and serve to complicate the interpretation of the electronic structure and bonding in bimetallic species containing first row transition metals. Furthermore, traditional tetragonal "paddlewheel" complexes dominate the metal-metal multiple bond literature, and only recently have researchers begun to take advantage of the weaker ligand field in three-fold symmetric bimetallic complexes to encourage more favourable metal-metal bonding interactions. In the past 5 years, several research groups have exploited three-fold symmetric frameworks to investigate new trends in metal-metal bonding involving the first row transition metals. This feature article serves to highlight recent achievements in this area and to use C3-symmetric systems as a model to better understand the fundamental aspects of multiple bonds featuring first row transition metals.

  3. Tendoscopic Double-Row Suture Bridge Peroneal Retinaculum Repair for Recurrent Dislocation of Peroneal Tendons in the Ankle.

    PubMed

    Nishimura, Akinobu; Nakazora, Shigeto; Ito, Naoya; Fukuda, Aki; Kato, Ko; Sudo, Akihiro

    2016-06-01

    Traumatic dislocation of peroneal tendons in the ankle is an uncommon lesion that mainly affects young adults. Unfortunately, most cases lead to recurrent dislocation of the peroneal tendons of the ankle (RPTD). Therefore, most cases need operative treatment. One of the most common operative procedures is superior peroneal retinaculum (SPR) repair. Recently, surgery for RPTD has been achieved with less invasive arthroscopic procedures. In this article, tendoscopic surgery for RPTD using a double-row suture bridge technique is introduced. This technique consists of debridement of the lateral aspect of the fibula under an intrasheath pseudo-cavity, suture anchor insertion into the fibular ridge, and reattachment of the SPR to the fibula using a knotless anchor screwed into the lateral aspect of the fibula. This technique mimics the double-row suture bridge technique for rotator cuff tear repair. The double-row suture bridge technique requires more surgical steps than the single-row technique, but it provides a wider bone-SPR contact surface and tighter fixation than the single-row technique. This procedure is an attractive option because it is less invasive and has achieved results similar to open procedures. PMID:27656359

  4. Blade Row Interaction Effects on the Performance of a Moderately Loaded NASA Transonic Compressor Stage

    NASA Technical Reports Server (NTRS)

    VanZante, Dale E.; To, Wai-Ming; Chen, Jen-Ping

    2003-01-01

    Blade row interaction effects on loss generation in compressors have received increased attention as compressor work-per-stage and blade loading have increased. Two dimensional Laser Doppler Velocimeter measurements of the velocity field in a NASA transonic compressor stage show the magnitude of interactions in the velocity field at the peak efficiency and near stall operating conditions. The experimental data are presented along with an assessment of the velocity field interactions. In the present study the experimental data are used to confirm the fidelity of a three-dimensional, time-accurate, Navier Stokes calculation of the stage using the MSU-TURBO code at the peak efficiency and near stall operating conditions. The simulations are used to quantify the loss generation associated with interaction phenomena. At the design point the stator pressure field has minimal effect on the rotor performance. The rotor wakes do have an impact on loss production in the stator passage at both operating conditions. A method for determining the potential importance of blade row interactions on performance is presented.

  5. Detecting Unsteady Blade Row Interaction in a Francis Turbine using a Phase-Lag Boundary Condition

    NASA Astrophysics Data System (ADS)

    Wouden, Alex; Cimbala, John; Lewis, Bryan

    2013-11-01

    For CFD simulations in turbomachinery, methods are typically used to reduce the computational cost. For example, the standard periodic assumption reduces the underlying mesh to a single blade passage in axisymmetric applications. If the simulation includes only a single array of blades with an uniform inlet condition, this assumption is adequate. However, to compute the interaction between successive blade rows of differing periodicity in an unsteady simulation, the periodic assumption breaks down and may produce inaccurate results. As a viable alternative the phase-lag boundary condition assumes that the periodicity includes a temporal component which, if considered, allows for a single passage to be modeled per blade row irrespective of differing periodicity. Prominently used in compressible CFD codes for the analysis of gas turbines/compressors, the phase-lag boundary condition is adapted to analyze the interaction between the guide vanes and rotor blades in an incompressible simulation of the 1989 GAMM Workshop Francis turbine using OpenFOAM. The implementation is based on the ``direct-storage'' method proposed in 1977 by Erdos and Alzner. The phase-lag simulation is compared with available data from the GAMM workshop as well as a full-wheel simulation. Funding provided by DOE Award number: DE-EE0002667.

  6. Cyanides and isocyanides of first-row transition metals: molecular structure, bonding, and isomerization barriers.

    PubMed

    Rayón, Víctor M; Redondo, Pilar; Valdés, Haydee; Barrientos, Carmen; Largo, Antonio

    2007-07-19

    Cyanides and isocyanides of first-row transition metal M(CN) (M=Sc-Zn) are investigated with quantum chemistry techniques, providing predictions for their molecular properties. A careful analysis of the competition between cyanide and isocyanide isomers along the transition series has been carried out. In agreement with the experimental observations, late transition metals (Co-Zn) clearly prefer a cyanide arrangement. On the other hand, early transition metals (Sc-Fe), with the only exception of the Cr(CN) system, favor the isocyanide isomer. The theoretical calculations predict the following unknown isocyanides, ScNC(3Delta), TiNC(4Phi), VNC(5Delta), and MnNC(7Sigma+), and agree with the experimental observation of FeNC(6Delta) and the CrCN(6Sigma+) cyanide. First-row transition metal cyanides and isocyanides are predicted to have relatively large dissociation energies with values within the range 80-101 kcal mol(-1), except Zn(CN), which has a dissociation energy around 50-55 kcal mol(-1), and low isomerization barriers. A detailed analysis of the bonding has been carried out employing the topological analysis of the charge density and an energy decomposition analysis. The role of the covalent and electrostatic contributions to the metal-ligand bonding, as well as the importance of pi bonding, are discussed. PMID:17580838

  7. A mathematical model of the oar blade - water interaction in rowing.

    PubMed

    Caplan, Nicholas; Gardner, Trevor

    2007-07-01

    Our aim was to present a mathematical model of rowing and sculling that allowed for a comparison of oar blade designs. The relative movement between the oar blades and water during the drive phase of the stroke was modelled, and the lift and drag forces generated by this complex interaction were determined. The model was driven by the oar shaft angular velocity about the oarlock in the horizontal plane, and was shown to be valid against measured on-water mean steady-state shell velocity for both a heavyweight men's eight and a lightweight men's single scull. Measured lift and drag force coefficients previously presented by the authors were used as inputs to the model, whichs allowed for the influence of oar blade design on rowing performance to be determined. The commonly used Big Blade, which is curved, and it's flat equivalent were compared, and blade curvature was shown to generate a 1.14% improvement in mean boat velocity, or a 17.1-m lead over 1500 m. With races being won and lost by much smaller margins than this, blade curvature would appear to play a significant role in propulsion.

  8. Development of a linearized unsteady Euler analysis for turbomachinery blade rows

    NASA Technical Reports Server (NTRS)

    Verdon, Joseph M.; Montgomery, Matthew D.; Kousen, Kenneth A.

    1995-01-01

    A linearized unsteady aerodynamic analysis for axial-flow turbomachinery blading is described in this report. The linearization is based on the Euler equations of fluid motion and is motivated by the need for an efficient aerodynamic analysis that can be used in predicting the aeroelastic and aeroacoustic responses of blade rows. The field equations and surface conditions required for inviscid, nonlinear and linearized, unsteady aerodynamic analyses of three-dimensional flow through a single, blade row operating within a cylindrical duct, are derived. An existing numerical algorithm for determining time-accurate solutions of the nonlinear unsteady flow problem is described, and a numerical model, based upon this nonlinear flow solver, is formulated for the first-harmonic linear unsteady problem. The linearized aerodynamic and numerical models have been implemented into a first-harmonic unsteady flow code, called LINFLUX. At present this code applies only to two-dimensional flows, but an extension to three-dimensions is planned as future work. The three-dimensional aerodynamic and numerical formulations are described in this report. Numerical results for two-dimensional unsteady cascade flows, excited by prescribed blade motions and prescribed aerodynamic disturbances at inlet and exit, are also provided to illustrate the present capabilities of the LINFLUX analysis.

  9. Comparison of Rowing Performance Improvements Following Various High-Intensity Interval Trainings.

    PubMed

    Akca, Firat; Aras, Dicle

    2015-08-01

    The purpose of this study was to examine the effects of high-intensity interval training (HIT) and supramaximal interval training (SMIT) on indoor rowing performance; 20 male lightweight collegiate rowers (age = 21.77 ± 2.35 years, height = 178.4 ± 6 cm, body mass = 69.6 ± 3.1 kg) participated in this study. Baseline testing involved a 2,000-m time trial and incremental exercise test to determine VO2peak, peak power output (PPO), and power at 4 mmol·L blood lactate threshold. After the baseline tests, participants were allocated to SMIT or HIT intervention groups, which they performed 8 times over a 4-week period (2 times per week, 2 days apart). The SMIT involved 10 × 30-second intervals at 150% of the PPO with 4-minute rest. The HIT involved 8 × 2.5-minute intervals at 90% of the PPO with 3-minute rest. Of note, 5.7 and 5 seconds of improvements were observed in 2,000-m performance after SMIT and HIT interventions, respectively. Of note, 2,000-m time trial performance, 2,000-m power, PPO, relative, and absolute VO2peak were significantly improved after both training interventions. However, the differences between the groups were not significant. As a result, 4 weeks of SMIT improves 2,000-m rowing ergometer performance and related physiological variables in a similar fashion with HIT in collegiate rowers.

  10. Fine Mapping of a QTL Associated with Kernel Row Number on Chromosome 1 of Maize

    PubMed Central

    Calderón, Claudia I.; Yandell, Brian S.; Doebley, John F.

    2016-01-01

    The genetic factors underlying changes in ear morphology, and particularly the inheritance of kernel row number (KRN), have been broadly investigated in diverse mapping populations in maize (Zea mays L.). In this study, we mapped a region on the long arm of chromosome 1 containing a QTL for KRN. This work was performed using a set of recombinant chromosome nearly isogenic lines (RCNILs) derived from a BC2S3 population produced using the inbred maize line W22 and teosinte (Zea mays ssp. parviglumis) as the parents. A set of 48 RCNILs was evaluated in the field during the summer of 2013 in order to perform the mapping. A QTL for KRN was found that explained approximately 51% of the phenotypic variance and had a 1.5-LOD confidence interval of 203 kb. Seven genes are described in this interval. One of these candidate genes may have been the target of domestication processes in maize and contributed to the shift from two kernel row ears in teosinte to a highly polystichous ear in maize. PMID:26930509

  11. Comparison of Rowing Performance Improvements Following Various High-Intensity Interval Trainings.

    PubMed

    Akca, Firat; Aras, Dicle

    2015-08-01

    The purpose of this study was to examine the effects of high-intensity interval training (HIT) and supramaximal interval training (SMIT) on indoor rowing performance; 20 male lightweight collegiate rowers (age = 21.77 ± 2.35 years, height = 178.4 ± 6 cm, body mass = 69.6 ± 3.1 kg) participated in this study. Baseline testing involved a 2,000-m time trial and incremental exercise test to determine VO2peak, peak power output (PPO), and power at 4 mmol·L blood lactate threshold. After the baseline tests, participants were allocated to SMIT or HIT intervention groups, which they performed 8 times over a 4-week period (2 times per week, 2 days apart). The SMIT involved 10 × 30-second intervals at 150% of the PPO with 4-minute rest. The HIT involved 8 × 2.5-minute intervals at 90% of the PPO with 3-minute rest. Of note, 5.7 and 5 seconds of improvements were observed in 2,000-m performance after SMIT and HIT interventions, respectively. Of note, 2,000-m time trial performance, 2,000-m power, PPO, relative, and absolute VO2peak were significantly improved after both training interventions. However, the differences between the groups were not significant. As a result, 4 weeks of SMIT improves 2,000-m rowing ergometer performance and related physiological variables in a similar fashion with HIT in collegiate rowers. PMID:25647654

  12. Who lives and dies on death row? Race, ethnicity, and post-sentence outcomes in Texas.

    PubMed

    Petrie, Michelle A; Coverdill, James E

    2010-01-01

    A substantial body of research has explored the extent to which the race of offenders and victims influences who receives a death sentence for capital crimes. Little is known about how race and ethnicity might pattern death-row outcomes. Drawing upon evidence from male offenders sentenced to death in Texas during the years 1974 through 2009, we extend recent research by examining whether the race and ethnicity of offenders and victims and a number of offender, victim, and crime attributes influence the likelihood of executions and sentence relief (whereby prisoners leave death row). Cox regression analyses are used in conjunction with a multiple-imputation method for handling a modest amount of missing data. The results show that cases involving minorities—with black or Latino offenders or victims—have lower hazards of execution than cases in which both offenders and victims are white. Victim and offender race and ethnicity have little to no independent effect upon the hazard of sentence relief.

  13. Pressurized thermal shock probabilistic fracture mechanics sensitivity analysis for Yankee Rowe reactor pressure vessel

    SciTech Connect

    Dickson, T.L.; Cheverton, R.D.; Bryson, J.W.; Bass, B.R.; Shum, D.K.M.; Keeney, J.A.

    1993-08-01

    The Nuclear Regulatory Commission (NRC) requested Oak Ridge National Laboratory (ORNL) to perform a pressurized-thermal-shock (PTS) probabilistic fracture mechanics (PFM) sensitivity analysis for the Yankee Rowe reactor pressure vessel, for the fluences corresponding to the end of operating cycle 22, using a specific small-break-loss- of-coolant transient as the loading condition. Regions of the vessel with distinguishing features were to be treated individually -- upper axial weld, lower axial weld, circumferential weld, upper plate spot welds, upper plate regions between the spot welds, lower plate spot welds, and the lower plate regions between the spot welds. The fracture analysis methods used in the analysis of through-clad surface flaws were those contained in the established OCA-P computer code, which was developed during the Integrated Pressurized Thermal Shock (IPTS) Program. The NRC request specified that the OCA-P code be enhanced for this study to also calculate the conditional probabilities of failure for subclad flaws and embedded flaws. The results of this sensitivity analysis provide the NRC with (1) data that could be used to assess the relative influence of a number of key input parameters in the Yankee Rowe PTS analysis and (2) data that can be used for readily determining the probability of vessel failure once a more accurate indication of vessel embrittlement becomes available. This report is designated as HSST report No. 117.

  14. Cyanides and isocyanides of first-row transition metals: molecular structure, bonding, and isomerization barriers.

    PubMed

    Rayón, Víctor M; Redondo, Pilar; Valdés, Haydee; Barrientos, Carmen; Largo, Antonio

    2007-07-19

    Cyanides and isocyanides of first-row transition metal M(CN) (M=Sc-Zn) are investigated with quantum chemistry techniques, providing predictions for their molecular properties. A careful analysis of the competition between cyanide and isocyanide isomers along the transition series has been carried out. In agreement with the experimental observations, late transition metals (Co-Zn) clearly prefer a cyanide arrangement. On the other hand, early transition metals (Sc-Fe), with the only exception of the Cr(CN) system, favor the isocyanide isomer. The theoretical calculations predict the following unknown isocyanides, ScNC(3Delta), TiNC(4Phi), VNC(5Delta), and MnNC(7Sigma+), and agree with the experimental observation of FeNC(6Delta) and the CrCN(6Sigma+) cyanide. First-row transition metal cyanides and isocyanides are predicted to have relatively large dissociation energies with values within the range 80-101 kcal mol(-1), except Zn(CN), which has a dissociation energy around 50-55 kcal mol(-1), and low isomerization barriers. A detailed analysis of the bonding has been carried out employing the topological analysis of the charge density and an energy decomposition analysis. The role of the covalent and electrostatic contributions to the metal-ligand bonding, as well as the importance of pi bonding, are discussed.

  15. SU-E-E-12: Validation of the Implementation of Different CT Scanners in Proton Treatment Planning

    SciTech Connect

    Fuentes, C Llina; Geismer, D; Christiaens, M; Vermeren, X; Ding, X

    2015-06-15

    Purpose: To quantify the impact of the relationship of CT number and Relative Stopping Power (RSP) among different CT-scanners in the evaluation of dose distribution, for different tumor sites and proton therapy modalities like Pencil Beam and Uniform Scanning. Methods: The same tissue characterization phantom was used to analyze the difference in the X-rays energy spectra of 2 CT scanners of the same vendor. One CT is for planning and the other for treatment verification. The Hounsfield unit (HU) variations and associated dosimetric uncertainty were investigated in uniform scanning and pencil beam treatment plans of different sites. At the same time comparisons of the CT calibration curve were done using the same acquisition protocols. The phantom was imaged on a 16 multi-row CT scanner, with energies of 120 and 140 kVp,currents of 263 and 245 mA and slice thickness of 2 and 3mm respectively. The dosimetric uncertainty of the plans was evaluated in a homogeneus phantom comparing DVHs, gamma index criteria 3% 3mm, and range between them. Results: The variation of HU was within the standard deviation of the average for each tissue substitute. The curves fitted with a bilinear interpolation show a maximum deviation in high density materials like cortical bone and solid water, where the HU values deviated more than 0,6% for the 120kVp protocol. For the others curves the deviation was more than 2% for low densities materials. The gamma index uncertainty criteria passed in all the cases. Conclusion: The HU variations for the different scanners were ≤3%. Lower than the 3,5% uncertainties considered in our treatment planning system. The dosimetric analysis shows that the X-ray spectrum has a small effect on the HU-RSP curve, allowing the use of a single tissue characterization curve in our proton treatment planning system for plans verifications.

  16. Ultra-low dose CT attenuation correction for PET/CT.

    PubMed

    Xia, Ting; Alessio, Adam M; De Man, Bruno; Manjeshwar, Ravindra; Asma, Evren; Kinahan, Paul E

    2012-01-21

    A challenge for positron emission tomography/computed tomography (PET/CT) quantitation is patient respiratory motion, which can cause an underestimation of lesion activity uptake and an overestimation of lesion volume. Several respiratory motion correction methods benefit from longer duration CT scans that are phase matched with PET scans. However, even with the currently available, lowest dose CT techniques, extended duration cine CT scans impart a substantially high radiation dose. This study evaluates methods designed to reduce CT radiation dose in PET/CT scanning. We investigated selected combinations of dose reduced acquisition and noise suppression methods that take advantage of the reduced requirement of CT for PET attenuation correction (AC). These include reducing CT tube current, optimizing CT tube voltage, adding filtration, CT sinogram smoothing and clipping. We explored the impact of these methods on PET quantitation via simulations on different digital phantoms. CT tube current can be reduced much lower for AC than that in low dose CT protocols. Spectra that are higher energy and narrower are generally more dose efficient with respect to PET image quality. Sinogram smoothing could be used to compensate for the increased noise and artifacts at radiation dose reduced CT images, which allows for a further reduction of CT dose with no penalty for PET image quantitation. When CT is not used for diagnostic and anatomical localization purposes, we showed that ultra-low dose CT for PET/CT is feasible. The significant dose reduction strategies proposed here could enable respiratory motion compensation methods that require extended duration CT scans and reduce radiation exposure in general for all PET/CT imaging. PMID:22156174

  17. Ultra-low dose CT attenuation correction for PET/CT

    NASA Astrophysics Data System (ADS)

    Xia, Ting; Alessio, Adam M.; De Man, Bruno; Manjeshwar, Ravindra; Asma, Evren; Kinahan, Paul E.

    2012-01-01

    A challenge for positron emission tomography/computed tomography (PET/CT) quantitation is patient respiratory motion, which can cause an underestimation of lesion activity uptake and an overestimation of lesion volume. Several respiratory motion correction methods benefit from longer duration CT scans that are phase matched with PET scans. However, even with the currently available, lowest dose CT techniques, extended duration cine CT scans impart a substantially high radiation dose. This study evaluates methods designed to reduce CT radiation dose in PET/CT scanning. We investigated selected combinations of dose reduced acquisition and noise suppression methods that take advantage of the reduced requirement of CT for PET attenuation correction (AC). These include reducing CT tube current, optimizing CT tube voltage, adding filtration, CT sinogram smoothing and clipping. We explored the impact of these methods on PET quantitation via simulations on different digital phantoms. CT tube current can be reduced much lower for AC than that in low dose CT protocols. Spectra that are higher energy and narrower are generally more dose efficient with respect to PET image quality. Sinogram smoothing could be used to compensate for the increased noise and artifacts at radiation dose reduced CT images, which allows for a further reduction of CT dose with no penalty for PET image quantitation. When CT is not used for diagnostic and anatomical localization purposes, we showed that ultra-low dose CT for PET/CT is feasible. The significant dose reduction strategies proposed here could enable respiratory motion compensation methods that require extended duration CT scans and reduce radiation exposure in general for all PET/CT imaging.

  18. Acute intestinal anisakiasis: CT findings.

    PubMed

    Ozcan, H N; Avcu, S; Pauwels, W; Mortelé, K J; De Backer, A I

    2012-09-01

    Small bowel anisakiasis is a relatively uncommon disease that results from consumption of raw or insufficiently pickled, salted, smoked, or cooked wild marine fish infected with Anisakis larvae. We report a case of intestinal anisakiasis in a 63-year-old woman presenting with acute onset of abdominal complaints one day after ingestion of raw wild-caught herring from the Northsea. Computed tomography (CT) scanning demonstrated thickening of the distal small bowel wall, mucosa with hyperenhancement, mural stratification, fluid accumulation within dilated small-bowel loops and hyperemia of mesenteric vessels. In patients with a recent history of eating raw marine fish presenting with acute onset of abdominal complaints and CT features of acute small bowel inflammation the possibility of anisakiasis should be considered in the differential diagnosis of acute abdominal syndromes.

  19. Postmortem pulmonary CT in hypothermia.

    PubMed

    Schweitzer, Wolf; Thali, Michael; Giugni, Giannina; Winklhofer, Sebastian

    2014-12-01

    Fatal hypothermia has been associated with pulmonary edema. With postmortem full body computed tomography scanning (PMCT), the lungs can also be examined for CT attenuation. In fatal hypothermia cases low CT attenuation appeared to prevail in the lungs. We compared 14 cases of fatal hypothermia with an age-sex matched control group. Additionally, 4 cases of carbon monoxide (CO) poisoning were examined. Furthermore, 10 test cases were examined to test predictability based on PMCT. Two readers measured CT attenuation on four different axial slices across the lungs (blinded to case group and other reader's results). Hypothermia was associated with statistically significantly lower lung PMCT attenuation and lower lung weights than controls, and there was a dose-effect relationship at an environmental temperature cutoff of 2 °C. CO poisoning yielded low pulmonary attenuation but higher lung weights. General model based prediction yielded a 94% probability for fatal hypothermia deaths and a 21% probability for non-hypothermia deaths in the test group. Increased breathing rate is known to accompany both CO poisoning and hypothermia, so this could partly explain the low PMCT lung attenuation due to an oxygen dissociation curve left shift. A more marked distension in fatal hypothermia, compared to CO poisoning, indicates that further, possibly different mechanisms, are involved in these cases. Increased dead space and increased stiffness to deflation (but not inflation) appear to be effects of inhaling cold air (but not CO) that may explain the difference in low PMCT attenuation seen in hypothermia cases. PMID:25326676

  20. CT-assisted agile manufacturing

    NASA Astrophysics Data System (ADS)

    Stanley, James H.; Yancey, Robert N.

    1996-11-01

    The next century will witness at least two great revolutions in the way goods are produced. First, workers will use the medium of virtual reality in all aspects of marketing, research, development, prototyping, manufacturing, sales and service. Second, market forces will drive manufacturing towards small-lot production and just-in-time delivery. Already, we can discern the merging of these megatrends into what some are calling agile manufacturing. Under this new paradigm, parts and processes will be designed and engineered within the mind of a computer, tooled and manufactured by the offspring of today's rapid prototyping equipment, and evaluated for performance and reliability by advanced nondestructive evaluation (NDE) techniques and sophisticated computational models. Computed tomography (CT) is the premier example of an NDE method suitable for future agile manufacturing activities. It is the only modality that provides convenient access to the full suite of engineering data that users will need to avail themselves of computer- aided design, computer-aided manufacturing, and computer- aided engineering capabilities, as well as newly emerging reverse engineering, rapid prototyping and solid freeform fabrication technologies. As such, CT is assured a central, utilitarian role in future industrial operations. An overview of this exciting future for industrial CT is presented.

  1. Postmortem pulmonary CT in hypothermia.

    PubMed

    Schweitzer, Wolf; Thali, Michael; Giugni, Giannina; Winklhofer, Sebastian

    2014-12-01

    Fatal hypothermia has been associated with pulmonary edema. With postmortem full body computed tomography scanning (PMCT), the lungs can also be examined for CT attenuation. In fatal hypothermia cases low CT attenuation appeared to prevail in the lungs. We compared 14 cases of fatal hypothermia with an age-sex matched control group. Additionally, 4 cases of carbon monoxide (CO) poisoning were examined. Furthermore, 10 test cases were examined to test predictability based on PMCT. Two readers measured CT attenuation on four different axial slices across the lungs (blinded to case group and other reader's results). Hypothermia was associated with statistically significantly lower lung PMCT attenuation and lower lung weights than controls, and there was a dose-effect relationship at an environmental temperature cutoff of 2 °C. CO poisoning yielded low pulmonary attenuation but higher lung weights. General model based prediction yielded a 94% probability for fatal hypothermia deaths and a 21% probability for non-hypothermia deaths in the test group. Increased breathing rate is known to accompany both CO poisoning and hypothermia, so this could partly explain the low PMCT lung attenuation due to an oxygen dissociation curve left shift. A more marked distension in fatal hypothermia, compared to CO poisoning, indicates that further, possibly different mechanisms, are involved in these cases. Increased dead space and increased stiffness to deflation (but not inflation) appear to be effects of inhaling cold air (but not CO) that may explain the difference in low PMCT attenuation seen in hypothermia cases.

  2. The midline protein regulates axon guidance by blocking the reiteration of neuroblast rows within the Drosophila ventral nerve cord.

    PubMed

    Manavalan, Mary Ann; Gaziova, Ivana; Bhat, Krishna Moorthi

    2013-01-01

    Guiding axon growth cones towards their targets is a fundamental process that occurs in a developing nervous system. Several major signaling systems are involved in axon-guidance, and disruption of these systems causes axon-guidance defects. However, the specific role of the environment in which axons navigate in regulating axon-guidance has not been examined in detail. In Drosophila, the ventral nerve cord is divided into segments, and half-segments and the precursor neuroblasts are formed in rows and columns in individual half-segments. The row-wise expression of segment-polarity genes within the neuroectoderm provides the initial row-wise identity to neuroblasts. Here, we show that in embryos mutant for the gene midline, which encodes a T-box DNA binding protein, row-2 neuroblasts and their neuroectoderm adopt a row-5 identity. This reiteration of row-5 ultimately creates a non-permissive zone or a barrier, which prevents the extension of interneuronal longitudinal tracts along their normal anterior-posterior path. While we do not know the nature of the barrier, the axon tracts either stall when they reach this region or project across the midline or towards the periphery along this zone. Previously, we had shown that midline ensures ancestry-dependent fate specification in a neuronal lineage. These results provide the molecular basis for the axon guidance defects in midline mutants and the significance of proper specification of the environment to axon-guidance. These results also reveal the importance of segmental polarity in guiding axons from one segment to the next, and a link between establishment of broad segmental identity and axon guidance.

  3. Comparative cervical profiles of adult and under-18 front-row rugby players: implications for playing policy

    PubMed Central

    Hamilton, D F; Gatherer, D; Robson, J; Graham, N; Rennie, N; MacLean, J G B; Simpson, A H R W

    2014-01-01

    Objective To compare the cervical isometric strength, fatigue endurance and range of motion of adult and under-18 age-grade front-row rugby players to inform the development of a safe age group policy with particular reference to scrummaging. Design Cross-sectional cohort study. Setting ‘Field testing’ at Murrayfield stadium. Participants 30 high-performance under-18 players and 22 adult front-row rugby players. Outcome measures Isometric neck strength, height, weight and grip strength. Results Youth players demonstrated the same height and grip strength as the adult players; however, the adults were significantly heavier and demonstrated substantially greater isometric strength (p<0.001). Only two of the ‘elite’ younger players could match the adult mean cervical isometric strength value. In contrast to school age players in general, grip strength was poorly associated with neck strength (r=0.2) in front-row players; instead, player weight (r=0.4) and the number of years’ experience of playing in the front row (r=0.5) were the only relevant factors in multivariate modelling of cervical strength (R2=0.3). Conclusions Extreme forces are generated between opposing front rows in the scrum and avoidance of mismatch is important if the risk of injury is to be minimised. Although elite youth front-row rugby players demonstrate the same peripheral strength as their adult counterparts on grip testing, the adults demonstrate significantly greater cervical strength. If older youths and adults are to play together, such findings have to be noted in the development of age group policies with particular reference to the scrum. PMID:24797427

  4. Row Ratios of Intercropping Maize and Soybean Can Affect Agronomic Efficiency of the System and Subsequent Wheat.

    PubMed

    Zhang, Yitao; Liu, Jian; Zhang, Jizong; Liu, Hongbin; Liu, Shen; Zhai, Limei; Wang, Hongyuan; Lei, Qiuliang; Ren, Tianzhi; Yin, Changbin

    2015-01-01

    Intercropping is regarded as an important agricultural practice to improve crop production and environmental quality in the regions with intensive agricultural production, e.g., northern China. To optimize agronomic advantage of maize (Zea mays L.) and soybean (Glycine max L.) intercropping system compared to monoculture of maize, two sequential experiments were conducted. Experiment 1 was to screening the optimal cropping system in summer that had the highest yields and economic benefits, and Experiment 2 was to identify the optimum row ratio of the intercrops selected from Experiment 1. Results of Experiment 1 showed that maize intercropping with soybean (maize || soybean) was the optimal cropping system in summer. Compared to conventional monoculture of maize, maize || soybean had significant advantage in yield, economy, land utilization ratio and reducing soil nitrate nitrogen (N) accumulation, as well as better residual effect on the subsequent wheat (Triticum aestivum L.) crop. Experiment 2 showed that intercropping systems reduced use of N fertilizer per unit land area and increased relative biomass of intercropped maize, due to promoted photosynthetic efficiency of border rows and N utilization during symbiotic period. Intercropping advantage began to emerge at tasseling stage after N topdressing for maize. Among all treatments with different row ratios, alternating four maize rows with six soybean rows (4M:6S) had the largest land equivalent ratio (1.30), total N accumulation in crops (258 kg ha(-1)), and economic benefit (3,408 USD ha(-1)). Compared to maize monoculture, 4M:6S had significantly lower nitrate-N accumulation in soil both after harvest of maize and after harvest of the subsequent wheat, but it did not decrease yield of wheat. The most important advantage of 4M:6S was to increase biomass of intercropped maize and soybean, which further led to the increase of total N accumulation by crops as well as economic benefit. In conclusion, alternating

  5. Row Ratios of Intercropping Maize and Soybean Can Affect Agronomic Efficiency of the System and Subsequent Wheat

    PubMed Central

    Zhang, Yitao; Liu, Jian; Zhang, Jizong; Liu, Hongbin; Liu, Shen; Zhai, Limei; Wang, Hongyuan; Lei, Qiuliang; Ren, Tianzhi; Yin, Changbin

    2015-01-01

    Intercropping is regarded as an important agricultural practice to improve crop production and environmental quality in the regions with intensive agricultural production, e.g., northern China. To optimize agronomic advantage of maize (Zea mays L.) and soybean (Glycine max L.) intercropping system compared to monoculture of maize, two sequential experiments were conducted. Experiment 1 was to screening the optimal cropping system in summer that had the highest yields and economic benefits, and Experiment 2 was to identify the optimum row ratio of the intercrops selected from Experiment 1. Results of Experiment 1 showed that maize intercropping with soybean (maize || soybean) was the optimal cropping system in summer. Compared to conventional monoculture of maize, maize || soybean had significant advantage in yield, economy, land utilization ratio and reducing soil nitrate nitrogen (N) accumulation, as well as better residual effect on the subsequent wheat (Triticum aestivum L.) crop. Experiment 2 showed that intercropping systems reduced use of N fertilizer per unit land area and increased relative biomass of intercropped maize, due to promoted photosynthetic efficiency of border rows and N utilization during symbiotic period. Intercropping advantage began to emerge at tasseling stage after N topdressing for maize. Among all treatments with different row ratios, alternating four maize rows with six soybean rows (4M:6S) had the largest land equivalent ratio (1.30), total N accumulation in crops (258 kg ha-1), and economic benefit (3,408 USD ha-1). Compared to maize monoculture, 4M:6S had significantly lower nitrate-N accumulation in soil both after harvest of maize and after harvest of the subsequent wheat, but it did not decrease yield of wheat. The most important advantage of 4M:6S was to increase biomass of intercropped maize and soybean, which further led to the increase of total N accumulation by crops as well as economic benefit. In conclusion, alternating

  6. The friction experiments using simulated fault gouge: Rowe's constant energy ratio

    NASA Astrophysics Data System (ADS)

    Hirata, M.; Muto, J.; Nagahama, H.; Otsuki, K.

    2013-12-01

    Rowe (1962) introduced a concept called minimum energy ratio principle to get a stress-dilatancy relation of granular materials under axisymmetric stress condition, and postulated that the ratio of rate of dissipation of energy in internal friction to rate of supply of energy in the direction of the major principal stress shall be a minimum and a constant value. However, the physical basis of this principle or physical meanings of the minimum incremental energy ratio have been questioned by many investigators. So we conducted friction experiments using simulated fault gouge in a gas-medium apparatus to test Rowe's hypothesis of constant energy ratio. The friction experiments using simulated fault gouge in a gas-medium apparatus was conducted under the confining pressure 140-180 MPa, and strain rate 10-3 /s. Dry quartz powders for gouge were sandwiched into two gabbro cylinders, which were 20 mm in diameter, 40 mm in length, and cut by a 50o to their cylindrical axis. To clarify mechanical behaviors of fault gouge, we repeated holding loads at several desired values, and used strain gauges glued onto a gauge layer directly with the high-speed data acquisition systems. During holding stage, we obtained the ratio of energy rate of the major principal compressional stress to minor compression stresses, or the energy rate ratio of input energy to output one. The ratio of energy rates showed a constant value in lower energy rates, on the other hand, it deviated from the constant value in higher energy rates. According to Rowe's theory of the constant energy ratio, the change in the ratio of energy rate indicates the change in angle of internal friction. Riedel shear angle related to internal friction angle decreases with shear strain (Gu and Wong, 1994), so it can be said that the change in internal friction angle is related to microstructure development. Therefore, the energy ratio in the lower energy rates is constant and the ratio in the higher energy rates varies

  7. Improvement of the cine-CT based 4D-CT imaging

    SciTech Connect

    Pan Tinsu; Sun Xiaojun; Luo Dershan

    2007-11-15

    An improved 4D-CT utility has been developed on the GE LightSpeed multislice CT (MSCT) and Discovery PET/CT scanners, which have the cine CT scan capability. Two new features have been added in this 4D-CT over the commercial Advantage 4D-CT from GE. One feature was a new tool for disabling parts of the respiratory signal with irregular respiration and improving the accuracy of phase determination for the respiratory signal from the Varian real-time positioning and monitoring (RPM) system before sorting of the cine CT images into the 4D-CT images. The second feature was to allow generation of the maximum-intensity-projection (MIP), average (AVG) and minimum-intensity-projection (mip) CT images from the cine CT images without a respiratory signal. The implementation enables the assessment of tumor motion in treatment planning with the MIP, AVG, and mip CT images on the GE MSCT and PET/CT scanners without the RPM and the Advantage 4D-CT with a GE Advantage windows workstation. Several clinical examples are included to illustrate this new application.

  8. [Evaluation of Slavic continuity for electrocardiograph (ECG)-gated non-helical scan using multi detector-row computed tomography with 64 data acquisition system].

    PubMed

    Shiotani, Masataka; Ogawa, Masato; Watanabe, Ryo; Shinohara, Tamotsu

    2012-01-01

    Multi detector-row computed tomography with 64 data acquisition systems are widely used for coronary CT angiography with an electrocardiograph (ECG) gated helical scan (HS). Step and shoot with ECG gated non-helical scan (snap shot pulse: SSP) could reduce exposure dose but banding artifact-like discontinuity was observed between adjacent slabs on volume rendering (VR) and curved planner reconstruction (CPR). Therefore, we investigated the factors that influence continuity of VR and CPR images by calculating image properties of Z-axis direction of slab. The observer performance studies were performed for evaluating continuity of simulated blood vessels of VR and CPR images at simulated heart rates: 50, 55, 57 and 60 beat per minute (bpm). As a result, the value of SD at both slab edges in SSP were 20.5% lower than middle part of slab and differences of value of SD were up to 4.4 between adjacent slab edges. Slice thickness of both slab edges were 20.3% thinner than that of the peripheral part of slab. At the border of the adjacent slab, the position of the simulated blood vessel was shifted. VR images of SSP at 57 bpm was indicated as the highest score and HS was significantly superior to SSP at 55 and 60 bpm (p<0.05). In CPR images, there were no significant differences at all simulated heart rates. In conclusion, we considered that VR images of SSP were influenced heart rates except 57 bpm (resonance case) and there was little difference of visibility for discontinuity of both CPR images obtained by SSP and HS.

  9. Gadolinium Ethoxybenzyl Diethylenetriamine Pentaacetic Acid (Gd-EOB-DTPA)-Enhanced Magnetic Resonance Imaging and Multidetector-Row Computed Tomography for the Diagnosis of Hepatocellular Carcinoma

    PubMed Central

    Ye, Feng; Liu, Jun; Ouyang, Han

    2015-01-01

    Abstract The purpose of this meta-analysis was to compare the diagnostic accuracy of gadolinium ethoxybenzyl diethylenetriamine pentaacetic acid (Gd-EOB-DTPA)-enhanced magnetic resonance imaging (MRI) and multidetector-row computed tomography (MDCT) for hepatocellular carcinoma (HCC). Medline, Cochrane, EMBASE, and Google Scholar databases were searched until July 4, 2014, using combinations of the following terms: gadoxetic acid disodium, Gd-EOB-DTPA, multidetector CT, contrast-enhanced computed tomography, and magnetic resonance imaging. Inclusion criteria were as follows: confirmed diagnosis of primary HCC by histopathological examination of a biopsy specimen; comparative study of MRI using Gd-EOB-DTPA and MDCT for diagnosis of HCC; and studies that provided quantitative outcome data. The pooled sensitivity and specificity of the 2 methods were compared, and diagnostic accuracy was assessed with alternative-free response receiver-operating characteristic analysis. Nine studies were included in the meta-analysis, and a total of 1439 lesions were examined. The pooled sensitivity and specificity for 1.5T MRI were 0.95 and 0.96, respectively, for 3.0T MRI were 0.91 and 0.96, respectively, and for MDCT were 0.74 and 0.93, respectively. The pooled diagnostic odds ratio for 1.5T and 3.0T MRI was 242.96, respectively, and that of MDCT was 33.47. To summarize, Gd-EOB-DTPA-enhanced MRI (1.5T and 3.0T) has better diagnostic accuracy for HCC than MDCT. PMID:26266348

  10. CT assessment of silicosis in exposed workers.

    PubMed

    Bégin, R; Bergeron, D; Samson, L; Boctor, M; Cantin, A

    1987-03-01

    For evaluation of the clinical usefulness of CT of the thorax in workers exposed to silica, 58 workers with long-term exposure to silica in the granite and foundry industries of the Eastern Townships of Quebec were examined. CT scans were compared with standard posteroanterior chest radiographs by using the International Labour Office 1980 grading system for silicosis. Six areas of the lung in each patient were assessed by both techniques for profusion (number) of opacities (small nodules), coalescence, and the presence of large opacities. CT scans and chest radiographs yielded similar average scores for detection of opacities. CT identified significantly more coalescence and large opacities in patients with simple silicosis. In patients with complicated silicosis, CT results were comparable with those of chest radiographs. CT of the thorax in workers exposed to silica does not identify more patients with minimal parenchymal disease, but it does detect earlier changes of coalescence.

  11. Gastric interposition following transhiatal esophagectomy: CT evaluation

    SciTech Connect

    Gross, B.H.; Agha, F.P.; Glazer, G.M.; Orringer, M.B.

    1985-04-01

    Transhiatal esophagectomy without thoracotomy (THE) but with gastric interposition results in less morbidity and mortality than standard transpleural esophagectomy with thoracotomy. Barium examination has been the primary radiographic study following THE for detecting postoperative complications. The authors reviewed computed tomography (CT) scans of 21 patients who had undergone THE and correlated CT appearance with clinical status and with findings of the barium studies. Local mediastinal recurrent neoplasm was detected by CT in seven patients; barium study within 2 weeks of the CT scan failed to detect tumor recurrence in three of these patients. CT is the modality of choice for detecting locally recurrent neoplasm and distant metastases following THE and may also be helpful in patients with postoperative mediastinal abscess. Normal mediastinal CT anatomy after esophagectomy is reviewed in order to warn against pitfalls in scan interpretation.

  12. The assessment of industrial CT's probing error

    NASA Astrophysics Data System (ADS)

    Shi, Yushu; Gao, Sitian; Song, Xu; Li, Dongsheng; Li, Wei; Li, Qi; Li, Shi; Chen, Siwen

    2014-11-01

    Similar to traditional CMM, probing error of industrial CT is used for assessing the 3D measurement error of the machine in a very small measurement volume. A research on the assessment of probing error of industrial CT is conducted here. Lots of assessment tests are carried out on the industrial CT Metrotom1500 in the National institute of metrology, using standard balls with different size and materials. The test results demonstrate that probing error of industrial CT can be affected seriously by the measurement strategy and standard balls. According to some further analysis about the test results, the assessment strategy of industrial CT's probing error is concluded preliminary, which can ensure the comparability of the assessment results in different industrial CT system.

  13. Effect of NACA Injection Impeller on Mixture Distribution of Double-Row Radial Aircraft Engine

    NASA Technical Reports Server (NTRS)

    Marble, Frank E; Ritter, William K; Miller, Mahlon A

    1945-01-01

    The NACA injection impeller was developed to improve the mixture distribution of aircraft engines by discharging the fuel from a centrifugal supercharger impeller and thus to promote a thorough mixing of fuel and charge air. Experiments with a double-row radial aircraft engine indicated that for the normal range of engine power the NACA injection impeller provided marked improvement in mixture distribution over the standard spray-bar injection system used in the same engine. The mixture distribution at cruising conditions was excellent; at 1200, 1500, and 1700 brake horsepower, the differences between the fuel-air ratios of the richest and the leanest cylinders were reduced to approximately one-third their former values.

  14. Demonstration off-post groundwater treatment plant (Rowe Spring): Concept design report. Final report

    SciTech Connect

    Marks, P.J.; Wujcik, W.J.; Hemmel, J.O.; Young, C.T.; Eddinger, F.G.

    1996-07-01

    The primary objective of this task was to develop an alternative treatment technique or an innovative use of a conventional technology to remove VOC contamination from Rowe Spring. A conceptual design for a treatment plant was to he prepared using the selected technology. Ten remedial technologies were evaluated using several criteria, including: ability to meet effluent requirements (non-detect for 9 VOCs), resident criteria (impact to surrounding human and animal populations, cost effectiveness, and other criteria). The selected groundwater remediation systems consist of a low-profile air stripping system and associated groundwater collection, conveyance, and post-treatment distribution systems. This report presents the concept design, conceptual level cost estimate, and geotechnical investigation report for the selected technology and treatment Site.

  15. [Spatial structure of acid properties of litter in the succession row of swamp birch woods ].

    PubMed

    Efremova, T T; Sekretenko, O P; Avrova, A F; Efremov, S P

    2013-01-01

    The general potential, exchange, and actual (pH) acidities were investigated in the litter of the succession row of swamp birch woods. Their variabilities constitute, respectively, 75.9-174.4, 3.7-25.8 mmol (+)/100 g of the sampling, 3.7-5.5. For the first time, using the methods ofgeostatistics, their spatial variability was analyzed and the contributions of the trend, autocorrelation component, and the radius of the spatial correlation were estimated. It was established that in combination with the tree waste, which is uniformly distributed along the ecological profile, the specific composition of the grass-moss tier, which corresponds to the humidity of edaphon, forms the picture of the spatial structure of acid properties of the litter. It was noted that the prime cause of variability consists in the particularities of the water regime of the habitats of swamp birch woods.

  16. A fast and unbiased procedure to randomize ecological binary matrices with fixed row and column totals.

    PubMed

    Strona, Giovanni; Nappo, Domenico; Boccacci, Francesco; Fattorini, Simone; San-Miguel-Ayanz, Jesus

    2014-01-01

    A well-known problem in numerical ecology is how to recombine presence-absence matrices without altering row and column totals. A few solutions have been proposed, but all of them present some issues in terms of statistical robustness (that is, their capability to generate different matrix configurations with the same probability) and their performance (that is, the computational effort that they require to generate a null matrix). Here we introduce the 'Curveball algorithm', a new procedure that differs from existing methods in that it focuses rather on matrix information content than on matrix structure. We demonstrate that the algorithm can sample uniformly the set of all possible matrix configurations requiring a computational effort orders of magnitude lower than that required by available methods, making it possible to easily randomize matrices larger than 10(8) cells.

  17. Experimental and Numerical Investigation of Losses in Low-Pressure Turbine Blade Rows

    NASA Technical Reports Server (NTRS)

    Dorney, Daniel J.; Lake, James P.; King, Paul I.; Ashpis, David E.

    2000-01-01

    Experimental data and numerical simulations of low-pressure turbines have shown that unsteady blade row interactions and separation can have a significant impact on the turbine efficiency. Measured turbine efficiencies at takeoff can be as much as two points higher than those at cruise conditions. Several recent studies have revealed that the performance of low-pressure turbine blades is a strong function of the Reynolds number. In the current investigation, experiments and simulations have been performed to study the behavior of a low-pressure turbine blade at several Reynolds numbers. Both the predicted and experimental results indicate increased cascade losses as the Reynolds number is reduced to the values associated with aircraft cruise conditions. In addition, both sets of data show that tripping the boundary layer helps reduce the losses at lower Reynolds numbers. Overall, the predicted aerodynamic and performance results exhibit fair agreement with experimental data.

  18. Modelling one row of Horns Rev wind farm with the Actuator Line Model with coarse resolution

    NASA Astrophysics Data System (ADS)

    Draper, M.; Guggeri, A.; Usera, G.

    2016-09-01

    Actuator models have been used to represent the presence of wind turbines in a simulation in the past few years. The Actuator Line Model (ALM) has shown to reproduce with reasonable accuracy the wind flow through wind turbines under different operational conditions. Nevertheless, there are not many simulations of wind farms performed with the ALM mainly because of its computational cost. The aim of the present paper is to evaluate the ALM in spatial resolutions coarser than what is generally recommended, also using larger time steps, in a simulation of a real wind farm. To accomplish this, simulations of one row of Horns Rev wind farm are performed, for different wind directions. It is concluded that the ALM is able to capture the main features of the interaction between wind turbines relaxing its resolution requirements. A sensitivity analysis is performed to assess the influence of the smearing factor and the spatial resolution.

  19. Core design study of a supercritical light water reactor with double row fuel rods

    SciTech Connect

    Zhao, C.; Wu, H.; Cao, L.; Zheng, Y.; Yang, J.; Zhang, Y.

    2012-07-01

    An equilibrium core for supercritical light water reactor has been designed. A novel type of fuel assembly with dual rows of fuel rods between water rods is chosen and optimized to get more uniform assembly power distributions. Stainless steel is used for fuel rod cladding and structural material. Honeycomb structure filled with thermal isolation is introduced to reduce the usage of stainless steel and to keep moderator temperature below the pseudo critical temperature. Water flow scheme with ascending coolant flow in inner regions is carried out to achieve high outlet temperature. In order to enhance coolant outlet temperature, the radial power distributions needs to be as flat as possible through operation cycle. Fuel loading pattern and control rod pattern are optimized to flatten power distribution at inner regions. Axial fuel enrichment is divided into three parts to control axial power peak, which affects maximum cladding surface temperature. (authors)

  20. Interaction of a circumferentially varying stator row upstream of a propeller in a uniform flow

    NASA Astrophysics Data System (ADS)

    Farnsworth, John; Amitay, Michael; Beal, David; Huyer, Stephen

    2010-11-01

    A propuslor capable of producing maneuvering forces in all directions effectively eliminates the need for additional control surfaces. Side forces can be generated by the propeller through the variation of the inflow swirl velocity to a conventional propeller. These control forces are generated based on the same geometric principles as a helicopter swash-plate. Instead of cyclically adjusting the propeller blade pitch angle, the relative pitch angle of a fixed pitch propeller is cyclically altered through a pre-swirled inflow generated by an upstream stator row. Wind tunnel and water tunnel experiments were conducted where surface static pressure, forces and moments, and stereoscopic PIV measurements were conducted on a simplified propulsor model. From these measurements a better understanding of the fluidic interactions of the complex propeller system was achieved.